WorldWideScience

Sample records for archive systems design

  1. Fault-tolerant design of picture archiving and communication systems

    International Nuclear Information System (INIS)

    Reliability is perhaps the most important attribute of a PACS. Any downtime of the system may seriously affect patient care. This paper describes fault-tolerant measures employed in the design of a hospital-wide PACS. Six fault-tolerant measures have been implemented: hardware redundance (networks and archives), data-base backups, monitoring routines for local host processes and network status; uninterruptible power supplied, structured software design techniques, and in-service training of all radiology technologists. A PACS consisting of 13 acquisition nodes, two optical archiving nodes, two data-base server nodes, and five workstation nodes has been developed

  2. Case Study: Design and Performance Evaluation of a Permanent File Archiving System

    Energy Technology Data Exchange (ETDEWEB)

    Linton, L. H.

    1979-01-01

    A common problem confronting many computer installations is the allocation of the limited on-line disk space to the insatiable user demand for this space. When disks become so saturated that the system can no longer function efficiently, some files must be removed. This paper deals with the problem of attempting to optimally select among all the files those which should remain on-line and those which should be archived (information written to tape but directory entry with tape number left on-line). A user access of an archived file automatically spins off a system job to retrieve the file from its tape. An algorithm for selecting files for archiving was designed on the basis of some system performance goals and hypotheses about permanent file usage. An archiving performance analysis program was run periodically to monitor the impact on system performance, the impact on system resources and the accuracy of file selection. Two areas in which archiving might degrade system performance are the following: long waits by interactive users for archived files to become available, and a steep rise in the number of weekly tape mounts due to archived files. An adverse effect of archiving on system resources would be felt if the number of directory entries for archived files or the number of tapes needed to hold archived files increased greatly. Improvements in file selection were studied by characterizing files that either were frequently archived or were never archived and rarely used. 9 figures.

  3. Oracle-based data archiver system and interface design for SSRF

    International Nuclear Information System (INIS)

    SSRF, as a national scientific base in China to provide synchrotron radiations from IR to hard X-rays for hundreds of scientists working simultaneously on the experimental stations, needs an efficient software platform for the facility control and user service. It uses a distributed control system of EPICS, which is commonly used home and abroad in large scientific facilities. Channel Archiver is an archiving toolset for EPICS, which is used to store and retrieve different types of data generated by EPICS. Based on analysis of Archive System, we have found some ways to overcome the defects in existing, and designed a new archiver system using Oracle database. This offers a unified interface for varieties of programs. (authors)

  4. Design and Data Model of the BNL Archive and Dissemination System

    Energy Technology Data Exchange (ETDEWEB)

    Heller, J.; Osterer, L.

    1977-03-01

    The BNL Archive and Dissemination (BNLAD) System was designed to operate on a homogeneous distributed data base in a computer network. Its primary function is to present a uniform logical and physical view of already existing sequential files of data, so that these files can be accessed at any node of a computer network where the BNLAD System is operable. The architecture of the system, based on a subset of PL/I (the host language), is presented. The Data Model, i.e. the information content of the data base as it is viewed by the users, of the BNLAD System is discussed by means of examples. 7 figs.

  5. [CORBA-based design and packaging of picture archiving and communication system object].

    Science.gov (United States)

    Zhang, Zu-jin; Sun, An-yu

    2009-10-01

    Regionalization has become one of the most important trends in the development of picture archiving and communication systems (PACS) due to the existence of large amounts of information islands. The conventional PACS designed according to the DICOM standard on the basis of the C/S structure fails to meet the demand of regional information system maintenance. A regional PACS system based on common object request broker architecture (CORBA) distributed technology is therefore proposed and implemented. This article describes the design and packaging of the PACS objects. When mounting a series of separate logical and related functional PACS objects on the ORB bus, the multi-scale PACS systems can be established. This method eliminates the limitation of the C/S structure and offers good compatibility and scalability.

  6. Full Tolerant Archiving System

    Science.gov (United States)

    Knapic, C.; Molinaro, M.; Smareglia, R.

    2013-10-01

    The archiving system at the Italian center for Astronomical Archives (IA2) manages data from external sources like telescopes, observatories, or surveys and handles them in order to guarantee preservation, dissemination, and reliability, in most cases in a Virtual Observatory (VO) compliant manner. A metadata model dynamic constructor and a data archive manager are new concepts aimed at automatizing the management of different astronomical data sources in a fault tolerant environment. The goal is a full tolerant archiving system, nevertheless complicated by the presence of various and time changing data models, file formats (FITS, HDF5, ROOT, PDS, etc.) and metadata content, even inside the same project. To avoid this unpleasant scenario a novel approach is proposed in order to guarantee data ingestion, backward compatibility, and information preservation.

  7. System Architecture for a Hubble Legacy Archive

    Science.gov (United States)

    Miller, W. W., III; Gaffney, N.; Jenkner, H.; Whitmore, B.

    2007-10-01

    The Space Telescope Science Institute (STScI), in collaboration with the European Coordinating Facility (ECF) and the Canadian Astronomy Data Centre (CADC), is studying the development of an enhanced archive for the Hubble Space Telescope (HST). Distinct from (but complimentary to) the existing archive system at the STScI, development of this enhanced archive affords the opportunity to leverage modern architectural and design principles toward meeting project objectives and serving the archive community. To wit, the STScI is designing the entire system as a service-oriented architecture (SOA). Composed of loosely-coupled, highly-interoperable Web services, an SOA embodies a great deal of flexibility in meeting future needs placed on the HST archive while also positioning it well within the emerging Virtual Observatory (VO) framework. A high-level architecture for the enhanced archive at the STScI is presented.

  8. The Naval Postgraduate School secure archival storage system, Part I. Design

    OpenAIRE

    Roger R. Schell; Cox, Lyle Ashton

    1980-01-01

    There is an increasing need tor systems which Drovide controlled access to multiple levels ot sensitive data and intormaticn. This rencrt comorises the first phase ot the realization ot such a system: the comprehensive design ot a multilevel secure tile storage system. This is the tocus ot an ongoing research oroject, which is currently in the early implementation phases. The design is based uocn security kernel technology as applied to modern multiple microcomputer arrays. ...

  9. Design, Deployment and Assessment of a Movie Archive System for Film Studies - A Case Study

    Directory of Open Access Journals (Sweden)

    Nazlena Mohamad Ali

    2012-10-01

    Full Text Available While most R&D activities in the multimedia field today focus on developing new algorithms and tools to automatically understand, index, manage and present media contents so that they could be used to help reduce people’s manual efforts in dealing with large amount of media contents, the issues of linking the developing or developed algorithms and tools to realistic end-user scenarios and applications have largely been relegated to other disciplines such as Human-Computer Interaction (HCI and Interaction Design. In this paper we present our reflection and interpretation of a multimedia project developing an end-to-end novel application incorporating a state-of-the-art “movie scene detection and classification” technique. Unlike any other technology-oriented projects in the multimedia community, this project attempted to bring usability engineering to the core of our experimental system development, extensively adopting the procedures, tools and methods available in usability engineering throughout all stages of the project – user study, ideation, interaction sketching, system implementation and deployment. Largest amount of effort was put to deployment stage, which involved facilitating the web-based system to 256 students in a film study course during a 3 month-long semester, during which the lecturers from the course provided necessary administration and coordination such as access to students, assignments and lab tutorials in order to fully integrate the system to the delivery of the course. Qualitative and quantitative data on the use of the system were recorded over time and analysed, to better understand the nature and characteristics of the developed system and its novel features afforded by the multimedia technology. We summarise the findings and the issues arising from trying to adopt user-centred HCI methods and procedures in developing nonconventional multimedia system throughout all stages of its development.

  10. Design, Deployment and Assessment of a Movie Archive System for Film Studies - A Case Study

    Directory of Open Access Journals (Sweden)

    Nazlena Mohamad Ali

    2012-11-01

    Full Text Available While most R&D activities in the multimedia field today focus on developing new algorithms and tools to automatically understand, index, manage and present media contents so that they could be used to help reduce people’s manual efforts in dealing with large amount of media contents, the issues of linking the developing or developed algorithms and tools to realistic end-user scenarios and applications have largely been relegated to other disciplines such as Human-Computer Interaction (HCI and Interaction Design. In this paper we present our reflection and interpretation of a multimedia project developing an end-to-end novel application incorporating a state-of-the-art “movie scene detection and classification” technique. Unlike any other technology-oriented projects in the multimedia community, this project attempted to bring usability engineering to the core of our experimental system development, extensively adopting the procedures, tools and methods available in usability engineering throughout all stages of the project – user study, ideation, interaction sketching, system implementation and deployment. Largest amount of effort was put to deployment stage, which involved facilitating the web-based system to 256 students in a film study course during a 3 month-long semester, during which the lecturers from the course provided necessary administration and coordination such as access to students, assignments and lab tutorials in order to fully integrate the system to the delivery of the course. Qualitative and quantitative data on the use of the system were recorded over time and analysed, to better understand the nature and characteristics of the developed system and its novel features afforded by the multimedia technology. We summarise the findings and theissues arising from trying to adopt user-centred HCI methods and procedures in developing nonconventional multimedia system throughout all stages of its development.

  11. 基于RFID的智能化档案管理系统模块设计%Intelligent archives management system based on RFID module design

    Institute of Scientific and Technical Information of China (English)

    章璐

    2015-01-01

    in order to adapt to the current archives management informationization, the traditional archives management problems such as backward and inefifcient, design the module of inteligent archives management system based on RFID technology. The system can realize the file real-time tracking and simplify the inventory of archives work, can greatly improve the work efifciency and inteligent level of ifle management.%为适应当前档案管理信息化的要求,解决传统档案管理存在的方式落后和效率低下等问题,设计了基于 RFID技术的智能档案管理系统模块。该系统可实现档案的实时追踪,简化档案的盘点工作,能大大提高档案管理的工作效率和智能化水平。

  12. 基于Web的高校档案管理系统设计%Design of Web-based college archives management system

    Institute of Scientific and Technical Information of China (English)

    谷惠敏

    2015-01-01

    The development of college archives management system can promote the management concept,methods and technical changes of college archives,and improve the service efficiency of the archives information resources availably,which provides the more efficient information services for office work,teaching,scientific research and daily management work of the school. The design and implementation method of Web-based college archives management system are described. Based on B/S architecture,the data are managed and stored by using using MySQL database and J2EE development platform. Compared with the previous management modes,this system has better security,more efficiency,and can save plenty of manpower and material resources.%高校档案管理系统开发能够促进高校档案管理理念、方法、技术的变革,有效提高档案信息资源的使用效率,为学校的办公、教学、科研、日常管理工作提供更高效的信息服务.描述了基于Web的高校档案管理系统的设计实现方法,基于B/S架构,采用J2EE开发平台,并利用MySQL数据库进行数据的管理和存储.与以往的管理方式相比,该系统安全性更好,效率更高,节省了大量的人力和物力.

  13. ITERDB—The Data Archiving System for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Abla, Gheni, E-mail: abla@fusion.gat.com [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Heber, Gerd [The HDF Group, 1800 South Oak Street, Suite 203, Champaign, IL 61820 (United States); Schissel, David P. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Robinson, Dana [The HDF Group, 1800 South Oak Street, Suite 203, Champaign, IL 61820 (United States); Abadie, Lana; Wallander, Anders [ITER Organization, Route de Vinon-sur-Verdon, 13115 St. Paul-lez-Durance (France); Flanagan, Sean M. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States)

    2014-05-15

    Highlights: • We identified the software requirements and priorities for the ITER data archiving. • We designed ITERDB – a system architecture for ITER data archiving. • We investigated the feasibility of using HDF5 as the ITERDB internal data store file format. - Abstract: For ITER, acquiring, managing and archiving its data is an essential task. ITER is foreseen to produce up to one terabyte of data per pulse and several petabytes of data per year. All the produced data needs to be stored and managed. The stored data is expected to serve the data access needs of ITER researchers located both on the ITER premises as well as worldwide during ITER's lifetime and beyond. ITERDB is a data management system being designed for centralized ITER data archival and data access. It is designed to manage and serve both unprocessed and processed data from the ITER plant systems and data analysis workflows. In this paper, we report the ITER Data Archiving System software requirements and priorities that have been identified by working with ITER staff and a large number of stakeholders. We will describe the design challenges and the proposed solutions. We will also present the current state of the ITERDB software architecture design.

  14. The Role of Planetary Data System Archive Standards in International Planetary Data Archives

    Science.gov (United States)

    Guinness, Edward; Slavney, Susan; Beebe, Reta; Crichton, Daniel

    A major objective of NASA's Planetary Data System (PDS) is to efficiently archive and make accessible digital data produced by NASA's planetary missions, research programs, and data analysis programs. The PDS is comprised of a federation of groups known as nodes, with each node focused on archiving and managing planetary data from a given science discipline. PDS nodes include Atmospheres, Geosciences, Small Bodies (asteroids, comets, and dust), Rings, Planetary Plasma Interactions, and Imaging. There are also support nodes for engineering, radio science, and ancillary data, such as geometry information. The PDS archives include space-borne, ground-based, and laboratory experiment data from several decades of NASA exploration of comets, asteroids, moons, and planets. PDS archives are peer-reviewed, welldocumented, and accessible online via web sites, catalogs, and other user-interfaces that provide search and retrieval capabilities. Current holdings within the PDS online repositories total approximately 50 TB of data. Over the next few years, the PDS is planning for a rapid expansion in the volume of data being delivered to its archives. The archive standards developed by the PDS are crucial elements for producing planetary data archives that are consistent across missions and planetary science disciplines and that yield archives that are useable by the planetary research community. These standards encompass the full range of archiving needs. They include standards for the format of data products and the metadata needed to detail how observations were made. They also specify how data products and ancillary information such as documentation, calibration, and geometric information are packaged into data sets. The PDS standards are documented in its Planetary Science Data Dictionary and in its Standards Reference Document and Archive Preparation Guide. The PDS standards are being used to design and implement data archives for current and future NASA planetary missions

  15. Medical Archive Recording System (MARS

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Tajvidi

    2007-08-01

    Full Text Available In this talk, one of the most efficient, and reliable integrated tools for CD/DVD production workflow, called Medical Archive Recording System (MARS by ETIAM Company, France, which is a leader in multimedia connectivity for healthcare in Europe, is going to be introduced. "nThis tool is used to record all patient studies, route the studies to printers and PACS automatically, print key images and associated reports and log all study production for automated post processing/archiving. Its benefits vary from multi-departmental system to highly customizability, IHE compliancy, high productivity, inclusion of workflow manager and web interface."nAn automated user-friendly DICOM viewer is in-cluded in this tool, which is used to display reports and key image. It also allows comparing several stu-dies on several discs."nThe viewer supports all DICOM objects including compressed images such as JPEG, JPEG 2000, RLE etc. and video added-value non-image DICOM ob-jects."nThe ETIAM MARS is offered in two versions: MARS 15d for medium productions and MARS 20d for medium to large productions. Some of the new features that are added are supports for Windows Vista, support of new DICOM objects (enhanced CT, MR, XA, Encapsulated PDF ... IHE PDI update, creation of object keys for key images; importing non-standard reports form files and many other features."nThe tool enables users to create, verify and index CDs and DVDs by simply sending studies from any DICOM node.

  16. Crab: A Dashboard System for Monitoring Archiving Tasks

    Science.gov (United States)

    Bell, G.; Jenness, T.; Agarwal, A.

    2013-10-01

    In order to make the large number of cron jobs required to perform data archiving tasks at the Joint Astronomy Centre more manageable, we have designed and implemented a dashboard system for monitoring their progress. The status of all of the tasks can be monitored on the dashboard's web interface, and via consolidated notification emails.

  17. Designation of organism group - Gclust Server | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available Gclust Server Designation of organism group Data detail Data name Designation of organism group Description ...of data contents The definition for grouping 95 species of organism is specified. The first line specifies t... This Database Site Policy | Contact Us Designation of organism group - Gclust Server | LSDB Archive ...

  18. Tarsys: a system for video archive management

    Science.gov (United States)

    Larrosa Jimenez, Rafael; Trabado, Guillermo P.; Lopez-Zapata, Emilio

    2000-10-01

    Tarsys is a video archive system which combines the flexible organization of multimedia databases, the efficiency of real-time filesystems and the scalability of tertiary storage (magnetic tape libraries and optical jukeboxes). Heavy data transfers over the network are usual between video servers and their clients. Tarsys reduces network traffic through the use of a remote manipulation protocol, so that only required fragments of multimedia data are transferred. Tarsys provides a suitable platform for the automatic extraction of content information from multimedia data. It also provides management of content based queries and efficient access to video fragments found by queries. These facilities in the access to archived videos make it ideal for large TV digital archives and scientific databases where is constitutes a platform for quick development of custom video analysis.

  19. Design and Implementation of an In?Cache Archival Entropy Coder for the Sonoma Persistent Surveillance System

    Energy Technology Data Exchange (ETDEWEB)

    Senecal, J G

    2008-10-01

    The Sonoma sensor, developed at Lawrence Livermore National Laboratory, is an electro-optical (EO) sensor composed of a tiled arrangement of cameras, where each camera sends 20 megabytes (MB) of raw data per frame. Depending on the sensor configuration, each sensor image, in aggregate, can total up to 320 MB. I discuss here the design and implementation of a high-speed entropy coder utilizing the Lead-1 encoding method, intended to quickly and losslessly compress sensor data before it is written to storage. More sophisticated (and slower) compression techniques may be performed off-line. The coder, favoring speed over coding efficiency, is simple in principle and tiny in practice: the amount of allocated memory required by the coder can be as small as 26 bytes. On a 2.7 GHz PowerMac G5 this coder is capable of encoding sensor data at a rate of 163 megabytes per second. The overall compression rate is better than that of BZIP2, GZIP, and a range coder, and the total execution speed is superior.

  20. Integration experiments and performance studies of a COTS parallel archive system

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hsing-bung [Los Alamos National Laboratory; Scott, Cody [Los Alamos National Laboratory; Grider, Gary [Los Alamos National Laboratory; Torres, Aaron [Los Alamos National Laboratory; Turley, Milton [Los Alamos National Laboratory; Sanchez, Kathy [Los Alamos National Laboratory; Bremer, John [Los Alamos National Laboratory

    2010-06-16

    Current and future Archive Storage Systems have been asked to (a) scale to very high bandwidths, (b) scale in metadata performance, (c) support policy-based hierarchical storage management capability, (d) scale in supporting changing needs of very large data sets, (e) support standard interface, and (f) utilize commercial-off-the-shelf (COTS) hardware. Parallel file systems have been asked to do the same thing but at one or more orders of magnitude faster in performance. Archive systems continue to move closer to file systems in their design due to the need for speed and bandwidth, especially metadata searching speeds such as more caching and less robust semantics. Currently the number of extreme highly scalable parallel archive solutions is very small especially those that will move a single large striped parallel disk file onto many tapes in parallel. We believe that a hybrid storage approach of using COTS components and innovative software technology can bring new capabilities into a production environment for the HPC community much faster than the approach of creating and maintaining a complete end-to-end unique parallel archive software solution. In this paper, we relay our experience of integrating a global parallel file system and a standard backup/archive product with a very small amount of additional code to provide a scalable, parallel archive. Our solution has a high degree of overlap with current parallel archive products including (a) doing parallel movement to/from tape for a single large parallel file, (b) hierarchical storage management, (c) ILM features, (d) high volume (non-single parallel file) archives for backup/archive/content management, and (e) leveraging all free file movement tools in Linux such as copy, move, Is, tar, etc. We have successfully applied our working COTS Parallel Archive System to the current world's first petafiop/s computing system, LANL's Roadrunner machine, and demonstrated its capability to address

  1. Integration experiences and performance studies of A COTS parallel archive systems

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hsing-bung [Los Alamos National Laboratory; Scott, Cody [Los Alamos National Laboratory; Grider, Bary [Los Alamos National Laboratory; Torres, Aaron [Los Alamos National Laboratory; Turley, Milton [Los Alamos National Laboratory; Sanchez, Kathy [Los Alamos National Laboratory; Bremer, John [Los Alamos National Laboratory

    2010-01-01

    Current and future Archive Storage Systems have been asked to (a) scale to very high bandwidths, (b) scale in metadata performance, (c) support policy-based hierarchical storage management capability, (d) scale in supporting changing needs of very large data sets, (e) support standard interface, and (f) utilize commercial-off-the-shelf(COTS) hardware. Parallel file systems have been asked to do the same thing but at one or more orders of magnitude faster in performance. Archive systems continue to move closer to file systems in their design due to the need for speed and bandwidth, especially metadata searching speeds such as more caching and less robust semantics. Currently the number of extreme highly scalable parallel archive solutions is very small especially those that will move a single large striped parallel disk file onto many tapes in parallel. We believe that a hybrid storage approach of using COTS components and innovative software technology can bring new capabilities into a production environment for the HPC community much faster than the approach of creating and maintaining a complete end-to-end unique parallel archive software solution. In this paper, we relay our experience of integrating a global parallel file system and a standard backup/archive product with a very small amount of additional code to provide a scalable, parallel archive. Our solution has a high degree of overlap with current parallel archive products including (a) doing parallel movement to/from tape for a single large parallel file, (b) hierarchical storage management, (c) ILM features, (d) high volume (non-single parallel file) archives for backup/archive/content management, and (e) leveraging all free file movement tools in Linux such as copy, move, ls, tar, etc. We have successfully applied our working COTS Parallel Archive System to the current world's first petaflop/s computing system, LANL's Roadrunner, and demonstrated its capability to address requirements of

  2. Towards Developing a CAS E-Journal Archiving System

    Institute of Scientific and Technical Information of China (English)

    ZHANG ZHIXIONG; WU ZHENXIN; ZHAO QI; LIU JIANHUA; GUO WENLI; XU JIAN

    2008-01-01

    As a part of NSTL proposed long-term preservation of digital information network,the National Science Library of CAS(NSLC)constructed a long-term preservation system of electronic journals called CAS E-Journal Archiving System,which was based on OAIS and adapted Fedora as the fundament system.The system chose a certain amount of electronic journals as pilot resources.Through three major system functional components comprising ingest,preservation management and data dissemination,the system took the long-term preservation of digital objects function into practice.The system is designed to be open and scalable.It realized digital objects management and lifecycle management.In this paper we describe the design of the system,and the issues we have learnt about long-term preservation.

  3. MESA: Mercator scheduler and archive system

    Science.gov (United States)

    Merges, Florian; Prins, Saskia; Pessemier, Wim; Raskin, Gert; Perez Padilla, Jesus; Van Winckel, Hans; Aerts, Conny

    2012-09-01

    We have developed an observing scheduling and archive system for the 1.2 meter Mercator Telescope. The goal was to optimize the specific niche of this modern small telescope in observational astrophysics: the building-up of long-term time series of photometric or high-resolution spectroscopic data with appropriate sampling for any given scientific program. This system allows PIs to easily submit their technical requirements and keep track of the progress of the observing programmes. The scheduling system provides the observer with an optimal schedule for the night which takes into account the current observing conditions as well as the priorities and requirements of the programmes in the queue. The observer can conveniently plan an observing night but also quickly adapt it to changing conditions. The archiving system automatically processes new files as they are created, including reduced data. It extracts the metadata and performs the normalization. A user can query, inspect and retrieve observing data. The progress of individual programmes, including timeline and reduced data plots can be seen at any time. Our MESA project is based on free and open source software (FOSS) using the Python programming language. The system is fully integrated with the Mercator Observing Control System1 (MOCS).

  4. Science information systems: Archive, access, and retrieval

    Science.gov (United States)

    Campbell, William J.

    1991-01-01

    The objective of this research is to develop technology for the automated characterization and interactive retrieval and visualization of very large, complex scientific data sets. Technologies will be developed for the following specific areas: (1) rapidly archiving data sets; (2) automatically characterizing and labeling data in near real-time; (3) providing users with the ability to browse contents of databases efficiently and effectively; (4) providing users with the ability to access and retrieve system independent data sets electronically; and (5) automatically alerting scientists to anomalies detected in data.

  5. THE DIGITAL ARCHIVING SYSTEM WITH TWITTER FOR LOCAL TRADITIONAL PERFORMING ARTS BY CITIZEN PARTICIPATION

    Directory of Open Access Journals (Sweden)

    Chiho Yoshida

    2011-12-01

    Full Text Available Local communities in mountainous and coast villages in Japan are facing problems related to aging and depopulation that discourage efforts to keep the traditional performing arts in the local community. The purpose of this study is to design an ―Archive and Community‖ model that creates a relationship between local citizens and non-citizens to keep the traditional performing arts in the local community by combining the traditional archiving system with social media like Twitter. This paper describes the experimental data results and discussions using the ―Archive and Community System‖ prototype.

  6. SDAMS SPOrt Data Archiving and Management System

    CERN Document Server

    Nicastro, L

    2002-01-01

    SDAMS is the ensemble of database + software packages aimed to the archiving, quick-look analysis, off-line analysis, network accessibility and plotting of the SPOrt produced data. Many of the aspects related to data archiving, analysis and distribution are common to almost all the astronomical experiments. SDAMS ambition is to face and solve problems like accessibility and portability of the data on any hardware/software platform in a way as simpler as possible, though effective. The system is conceived in a way to be used either by the scientific community interested in background radiation studies or by a wider public with low or null knowledge of the subject. The user authentication system allows us to apply different levels of access, analysis and data retrieving. SDAMS will be accessible through any Web browser though the most efficient way to use it is by writing simple programs. Graphics and images useful for outreach purposes will be produced and put on the Web on a regular basis.

  7. SDAMS: SPOrt data archiving and management system

    Science.gov (United States)

    Nicastro, Luciano; Calderone, Giorgio

    2002-03-01

    SDAMS is the ensemble of database+software packages aimed to the archiving, quick-look analysis, off-line analysis, network accessibility and plotting of the SPOrt produced data. Many of the aspects related to data archiving, analysis and distribution are common to almost all the astronomical experiments. SDAMS ambition is to face and solve problems like accessibility and portability of the data on any hardware/software platform in a way as simpler as possible, though effective. The system is conceived in a way to be used either by the scientific community interested in background radiation studies or by a wider public with low or null knowledge of the subject. The user authentication system allows us to apply different levels of access, analysis and data retrieving. SDAMS will be accessible through any Web browser though the most efficient way to use it is by writing simple programs. Graphics and images useful for outreach purposes will be produced and put on the Web on a regular basis. .

  8. Ultrasonic identity data storage and archival system

    International Nuclear Information System (INIS)

    Ultrasonic seals are being used to determine if an underwater stored spent fuel container has been compromised and can be used to determine if a nuclear material container has been compromised. The Seal Pattern Reader (SPAR) is a microprocessor controlled instrument which interrogates an ultrasonic seal to obtain its identity. The SPAR can compare the present identity with a previous identity, which it obtains from a magnetic bubble cassette memory. A system has been developed which allows an IAEA inspector to transfer seal information obtained at a facility by the SPAR to an IAEA-based data storage and retrieval system, using the bubble cassette memory. Likewise, magnetic bubbles can be loaded at the IAEA with seal signature data needed at a facility for comparison purposes. The archived signatures can be retrieved from the data base for relevant statistical manipulation and for plotting

  9. Lofar information system design

    NARCIS (Netherlands)

    Valentijn, E.; Belikov, A. N.

    2009-01-01

    The Lofar Information System is a solution for Lofar Long Term Archive that is capable to store and handle PBs of raw and processed data. The newly created information system is based on Astro-WISE - the information system for wide field astronomy. We review an adaptation of Astro-WISE for the new t

  10. The IUE Final Archive Processing System

    Science.gov (United States)

    Imhoff, C. L.; Dunn, N.; Fireman, G. F.; Levay, K. L.; Meylan, T.; Nichols, J.; Michalitsianos, A.

    1993-12-01

    The IUE Project has begun the task of reprocessing all IUE data using significantly enhanced reduction algorithms and calibrations. In order to perform this task in a timely, reliable manner, we have developed the IUE Final Archive Processing System. The system runs on a DECstation 5000, using Fortran software embedded in portable MIDAS. The processing queue is driven by a commercial relational database. The database interface allows the system to access the enhanced IUE database, which is resident on a second DECstation 5000 (see poster by Levay et al.). The system runs automatically, with little operator intervention. Built-in quality assurance software detects virtually all input or processing problems. In addition, a fraction of the images, including all those with quality assurance warnings, are screened by the staff. The screening system, known as the Post-Production Verification (PPV) system, uses a widget-based graphics user interface written in IDL. It allows one to display and inspect the MIDAS and FITS files, review the FITS headers and other text files, and record the results in the IUE database. Images which have passed quality assurance are then delivered to NASA's National Space Science Data Center, which makes the data available to the astronomical community. This work has been supported under NASA contract NAS5-31230 to Computer Sciences Corp.

  11. Three dimensional characterization and archiving system

    International Nuclear Information System (INIS)

    The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D and D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D and D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. Real-time remotely operable characterization instrumentation will significantly advance the analysis capabilities beyond those currently employed. Chemical analysis is a primary area where the characterization process will be improved. The 3D-ICAS system robotically conveys a multisensor probe near the surfaces to be inspected. The sensor position and orientation are monitored and controlled using coherent laser radar (CLR) tracking. The CLR also provides 3D facility maps which establish a 3D world view within which the robotic sensor system can operate

  12. Three dimensional characterization and archiving system

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian, R.L.; Clark, R.; Gallman, P. [and others

    1996-04-01

    The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D and D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D and D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. Real-time remotely operable characterization instrumentation will significantly advance the analysis capabilities beyond those currently employed. Chemical analysis is a primary area where the characterization process will be improved. The 3D-ICAS system robotically conveys a multisensor probe near the surfaces to be inspected. The sensor position and orientation are monitored and controlled using coherent laser radar (CLR) tracking. The CLR also provides 3D facility maps which establish a 3D world view within which the robotic sensor system can operate.

  13. Three dimensional characterization and archiving system

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian, R.L.; Clark, R.; Gallman, P. [Coleman Research Corp., Springfield, VA (United States)] [and others

    1995-10-01

    The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D&D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D&D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. The 3D-ICAS system robotically conveys a multisensor probe near the surface to be inspected. The sensor position and orientation are monitored and controlled by Coherent laser radar (CLR) tracking. The ICAS fills the need for high speed automated organic analysis by means of gas chromatography-mass spectrometry sensors, and also by radionuclide sensors which combines alpha, beta, and gamma counting.

  14. Archiving of data from earth system research - an overview

    OpenAIRE

    Grobe, Hannes; Sieger, Rainer

    2009-01-01

    With examples from earth system research data, an overview is presented on organizations, infrastructures and technologies involved in the long-term archiving, publication and provision of data, e.g. Global Change Master Directory, World Data Center System, NASA, national archives, portals. The importance of metadata, geocodes, citations and persistent identifiers in the context of data search and usage is discussed. Major international projects producing data and repositories storing data in...

  15. ACE: A distributed system to manage large data archives

    Science.gov (United States)

    Daily, Mike I.; Allen, Frank W.

    1993-01-01

    Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

  16. Three dimensional characterization and archiving system

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian, R.L.; Clark, R.; Gallman, P. [and others

    1995-12-01

    The Three Dimensional Characterization and Archiving System (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. Coleman Research and its subcontractors, Thermedics Detection, Inc. (TD) and the University of Idaho (UI) are in the second phase of a three phase program to develop 3D-ICAS to support Decontamination and Decommissioning (D&D) operations. Accurate physical characterization of surfaces and the radioactive and organic is a critical D&D task. Surface characterization includes identification of potentially dangerous inorganic materials, such as asbestos and transite. Real-time remotely operable characterization instrumentation will significantly advance the analysis capabilities beyond those currently employed. Chemical analysis is a primary area where the characterization process will be improved. Chemical analysis plays a vital role throughout the process of decontamination. Before clean-up operations can begin the site must be characterized with respect to the type and concentration of contaminants, and detailed site mapping must clarify areas of both high and low risk. During remediation activities chemical analysis provides a means to measure progress and to adjust clean-up strategy. Once the clean-up process has been completed the results of chemical analysis will verify that the site is in compliance with federal and local regulations.

  17. Transparent image access in a distributed picture archiving and communications system: The master database broker

    OpenAIRE

    Cox, R D; Henri, C. J.; Rubin, R. K.

    1999-01-01

    A distributed design is the most cost-effective system for small- to medium-scale picture archiving and communications systems (PACS) implementations. However, the design presents an interesting challenge to developers and implementers: to make stored image data, distributed throughout the PACS network, appear to be centralized with a single access point for users. A key component for the distributed system is a central or master database, containing all the studies that have been scanned int...

  18. Three dimensional characterization and archiving system

    Energy Technology Data Exchange (ETDEWEB)

    Clark, R.; Gallman, P.; Gaudreault, J.; Mosehauer, R.; Slotwinski, A.; Jarvis, G.; Griffiths, P.

    1996-12-31

    This system (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. It is in the final phase of a 3-phase program to support Decontamination and Decommissioning (D&D) operations. Accurate physical characterization of surfaces and radioactive and organic contamination is a critical D&D task. Surface characterization includes identification of dangerous inorganic materials such as asbestos and transite. 3D-ICAS robotically conveys a multisensor probe near the surfaces to be inspected, using coherent laser radar tracking, which also provides 3D facility maps. High-speed automated organic analysis is provided by means of gas chromatograph-mass spectrometer sensor which can process a sample without contact in one minute. Volatile organics are extracted directly from contaminated surfaces without sample removal; multiple stage focusing is used for high time resolution. Additional discrimination is obtained through a final stage time-of-flight mass spectrometer. The radionuclide sensors combines {alpha}, {beta}, and {gamma} counting with energy discrimination of the {alpha} channel; this quantifies isotopes of U, Pu, Th, Tc, Np, and Am in one minute. The Molecular Vibrational Spectrometry sensor is used to characterize substrate material such as concrete, transite, wood, or asbestos; this can be used to provide estimates of the depth of contamination. The 3D-ICAS will be available for real-time monitoring immediately after each 1 to 2 minute sample period. After surface mapping, 3-D displays will be provided showing contours of detected contaminant concentrations. Permanent measurement and contaminant level archiving will be provided, assuring data integrity and allowing regulatory review before and after D&D operations.

  19. Three dimensional characterization and archiving system

    International Nuclear Information System (INIS)

    This system (3D-ICAS) is being developed as a remote system to perform rapid in situ analysis of hazardous organics and radionuclide contamination on structural materials. It is in the final phase of a 3-phase program to support Decontamination and Decommissioning (D ampersand D) operations. Accurate physical characterization of surfaces and radioactive and organic contamination is a critical D ampersand D task. Surface characterization includes identification of dangerous inorganic materials such as asbestos and transite. 3D-ICAS robotically conveys a multisensor probe near the surfaces to be inspected, using coherent laser radar tracking, which also provides 3D facility maps. High-speed automated organic analysis is provided by means of gas chromatograph-mass spectrometer sensor which can process a sample without contact in one minute. Volatile organics are extracted directly from contaminated surfaces without sample removal; multiple stage focusing is used for high time resolution. Additional discrimination is obtained through a final stage time-of-flight mass spectrometer. The radionuclide sensors combines α, β, and γ counting with energy discrimination of the α channel; this quantifies isotopes of U, Pu, Th, Tc, Np, and Am in one minute. The Molecular Vibrational Spectrometry sensor is used to characterize substrate material such as concrete, transite, wood, or asbestos; this can be used to provide estimates of the depth of contamination. The 3D-ICAS will be available for real-time monitoring immediately after each 1 to 2 minute sample period. After surface mapping, 3-D displays will be provided showing contours of detected contaminant concentrations. Permanent measurement and contaminant level archiving will be provided, assuring data integrity and allowing regulatory review before and after D ampersand D operations

  20. Partnerships and opportunities: The archival management of geographic information systems

    Science.gov (United States)

    Zimmerman, Ann

    1995-01-01

    This article provides an overview of geographic information systems (GISs) technology and applications. It discusses its implications for archives, including a review of the existing literature. Finally, the article recommends a strategy for managing such systems based on the study of an environmental GIS application in a federal research center and on the vision recently expressed by David Bearman and Margaret Hedstrom. A multi-staged approach to the archival management of GISs is recommended and new partnerships are suggested to aid archivists in the future management of these systems.

  1. Archiving Software Systems: Approaches to Preserve Computational Capabilities

    Science.gov (United States)

    King, T. A.

    2014-12-01

    A great deal of effort is made to preserve scientific data. Not only because data is knowledge, but it is often costly to acquire and is sometimes collected under unique circumstances. Another part of the science enterprise is the development of software to process and analyze the data. Developed software is also a large investment and worthy of preservation. However, the long term preservation of software presents some challenges. Software often requires a specific technology stack to operate. This can include software, operating systems and hardware dependencies. One past approach to preserve computational capabilities is to maintain ancient hardware long past its typical viability. On an archive horizon of 100 years, this is not feasible. Another approach to preserve computational capabilities is to archive source code. While this can preserve details of the implementation and algorithms, it may not be possible to reproduce the technology stack needed to compile and run the resulting applications. This future forward dilemma has a solution. Technology used to create clouds and process big data can also be used to archive and preserve computational capabilities. We explore how basic hardware, virtual machines, containers and appropriate metadata can be used to preserve computational capabilities and to archive functional software systems. In conjunction with data archives, this provides scientist with both the data and capability to reproduce the processing and analysis used to generate past scientific results.

  2. Design university capital construction projects digital archive management system%高校基本建设项目档案数字化管理系统的设计

    Institute of Scientific and Technical Information of China (English)

    孙加加

    2014-01-01

    With the size and number of university capital construction projects increasing ,the tradition-al method of file management infrastructure cannot meet modern archives management requirements . The Java language technology was used to develop the management system ,which base on the MVC framework mode from the presentation layer ,business layer ,data layer to develop information man-agement systems ,and to digitize file of the infrastructure projects archives ,and to achieve effective management infrastructure archives .%高校基本建设项目的规模及数量的增加,传统的基建档案的管理方法逐渐不能满足现代档案管理要求。采用Java语言技术,基于M VC框架模式从显示层、业务层、数据层开发信息管理系统,将基本建设项目档案资料进行数字化处理,实现基建档案的有效管理。

  3. Data Model of the BNL Archive and Dissemination System

    Energy Technology Data Exchange (ETDEWEB)

    Heller, J; Osterer, L

    1977-02-01

    The Data Model, i.e., the information content of the data base as it is viewed by the users, of the BNL Archive and Dissemination System is presented. The syntax of the data model is stated in BNF form, and the semantic meaning is discussed. Examples of the use of the data model are given. 3 figs.

  4. A WWW-Based Archive and Retrieval System for Multimedia

    Science.gov (United States)

    Hyon, J.; Sorensen, S.; Martin, M.; Kawasaki, K.; Takacs, M.

    1996-01-01

    This paper describes the Data Distribution Laboratory (DDL) and discusses issues involved in building multimedia CD-ROMs. It describes the modeling philosophy for cataloging multimedia products and the worldwide-web (WWW)-based multimedia archive and retrieval system (Webcat) built on that model.

  5. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  6. Enhancement of real-time EPICS IOC PV management for the data archiving system

    Science.gov (United States)

    Kim, Jae-Ha

    2015-10-01

    The operation of a 100-MeV linear proton accelerator, the major driving values and experimental data need to be archived. According to the experimental conditions, different data are required. Functions that can add new data and delete data in real time need to be implemented. In an experimental physics and industrial control system (EPICS) input output controller (IOC), the value of process variables (PVs) are matched with the driving values and data. The PV values are archived in text file format by using the channel archiver. There is no need to create a database (DB) server, just a need for large hard disk. Through the web, the archived data can be loaded, and new PV values can be archived without stopping the archive engine. The details of the implementation of a data archiving system with channel archiver are presented, and some preliminary results are reported.

  7. Application of ITER data archiving system for PF control system%ITER数据归档系统的应用

    Institute of Scientific and Technical Information of China (English)

    单凤; 傅鹏; 黄连生; 高格

    2015-01-01

    国际热核实验堆(International Thermonuclear Experimental Reactor, ITER)是世界上最大的超导托卡马克装置,其中央控制系统CODAC (Control, Data Access and Communication)为ITER装置及其各个子系统提供了丰富的控制系统设计与开发工具.ITER极向场整流器系统作为其子系统之一在运行的过程中会产生大量的实验数据,大量数据的高速采集给数据的存储造成很大的困难,其控制系统需要及时地将采集到的数据进行有效的存储,并提供相应数据的查看方式.本文采用CODAC提供的数据归档系统对极向场控制系统数据进行有效的管理.在充分了解该数据归档系统的基础上,对该数据归档系统的使用和可用性进行了详细的介绍.%Background: International Thermonuclear Experimental Reactor (ITER) is the largest superconducting Tokamak device in the world. CODAC (Control, Data Access and Communication) system has been adopted as the central control system for ITER device. This system provides ITER subsystems with many tools to design and develop its own sub-control system. ITER device will produce a larger number of experimental data during its operation. Fast data acquisition and large volume of data can bring great difficulty to control system.Purpose: This study aims to design and implement a data archiving system for Poloidal Field (PF) control to archive these data effectively in time, and provide some way to check the data.Methods: Data Archiving Network (DAN) of CODAC is employed to implement an effective data archiving system for ITER PF control system, and a program to do data lookup is designed using Python. Necessary experiments to simulate the PF system were performed to test this data archiving system flexibly.ResultsandConclusion: Experimental results show that this data archiving system can store experimental data effectively.

  8. The Design and Operation of The Keck Observatory Archive

    CERN Document Server

    Berriman, G Bruce; Goodrich, Robert W; Holt, Jennifer; Kong, Mihseh; Laity, Anastasia C; Mader, Jeffrey A; Swain, Melanie; Tran, Hien D

    2014-01-01

    The Infrared Processing and Analysis Center (IPAC) and the W. M. Keck Observatory (WMKO) operate an archive for the Keck Observatory. At the end of 2013, KOA completed the ingestion of data from all eight active observatory instruments. KOA will continue to ingest all newly obtained observations, at an anticipated volume of 4 TB per year. The data are transmitted electronically from WMKO to IPAC for storage and curation. Access to data is governed by a data use policy, and approximately two-thirds of the data in the archive are public.

  9. Software Design Analyzer System

    Science.gov (United States)

    Tausworthe, R. C.

    1985-01-01

    CRISP80 software design analyzer system a set of programs that supports top-down, hierarchic, modular structured design, and programing methodologies. CRISP80 allows for expression of design as picture of program.

  10. Hard disk online caches in picture archiving and communication systems archives: how big is beautiful?

    Energy Technology Data Exchange (ETDEWEB)

    Wirth, Stefan; Treitl, Marcus; Mueller-Lisse, U.G.; Rieger, Johannes; Mittermaier, Ingo; Pfeifer, K.J.; Reiser, Maximilian [Ludwig-Maximilians University of Munich, Department of Clinical Radiology, Munich (Germany)

    2006-08-15

    The objective of our study was to support algorithmic recommendations for the appropriate sizing of picture archiving and communication system (PACS) caches. For a large PACS installation, a detailed analysis of current radiographic (CR), CT and MRI studies (n=400 consecutive studies, respectively) was performed. In this process every available prior examination was also considered. A new algorithmic procedure for appropriate sizing of PACS caches was developed and applied to the given cache implementation. The number of all priors was 7.6{+-}12.3. Of them, 61% were relevant priors with an average age of 203{+-}385 days. A basic cache (BC) that covers 12 months of current imaging results in a pre-fetching quote of 15.4% (8.6% for 24 months). In the PACS installation examined, a minimal threefold increase in cache capacity was recommended. Studies that are retrieved, prior to viewing, from the long-term archive require additional space in the extended cache (EC). An intimate and mutual interaction between hospital information system (HIS), radiology information system (RIS) and PACS minimizes this requirement and increases the time during which actual image material from the BC is available online. A basic cache size covering actual imaging of 12 months up to 24 months is recommended. The parameters governing the individual dimensions of both cache spaces and a mathematical algorithm are demonstrated. (orig.)

  11. System analysis and design

    International Nuclear Information System (INIS)

    This book deals with information technology and business process, information system architecture, methods of system development, plan on system development like problem analysis and feasibility analysis, cases for system development, comprehension of analysis of users demands, analysis of users demands using traditional analysis, users demands analysis using integrated information system architecture, system design using integrated information system architecture, system implementation, and system maintenance.

  12. Archive Design Based on Planets Inspired Logical Object Model

    DEFF Research Database (Denmark)

    Zierau, Eld; Johansen, Anders

    2008-01-01

    We describe a proposal for a logical data model based on preliminary work the Planets project In OAIS terms the main areas discussed are related to the introduction of a logical data model for representing the past, present and future versions of the digital object associated with the Archival...

  13. Human Systems Design Criteria

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1982-01-01

    This paper deals with the problem of designing more humanised computer systems. This problem can be formally described as the need for defining human design criteria, which — if used in the design process - will secure that the systems designed get the relevant qualities. That is not only...

  14. Design and implementation of library archive management system based on Web technology%基于W eb的图书馆档案管理系统设计与实现

    Institute of Scientific and Technical Information of China (English)

    许慧; 张立铭

    2016-01-01

    Archive management is an important content of the library daily work,so how to improve the library routine ar⁃chive management efficiency by means of information technology means,and reduce file management accident has become the urgent problems in library daily management. Establishment of a Web⁃based library file management system is proposed in this paper. By means of advanced Web information technology,it can solve the low efficiency,file loss,frequent recording errors ap⁃pearing in traditional file management,realize the file information collaborative management between different administrators, improve the library archive information management efficiency greatly,and reduce the cost of library archive management.%档案管理作为图书馆日常办公的一项重要工作内容,如何借助于信息化手段,提高图书馆日常档案管理办公效率,降低档案管理事故成为当前图书馆日常管理急需解决的问题,提出构建基于Web的图书馆档案管理系统。该系统借助于先进的Web信息化技术,不仅解决了传统档案管理效率低、档案丢失、记录错误等事故频发等问题,同时实现了不同管理员之间的档案信息协同管理,极大地提高了图书馆档案信息管理工作效率,降低了图书馆档案管理成本。

  15. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  16. The data archive system and preliminary applications of Hefei light source based on oracle

    International Nuclear Information System (INIS)

    Data archive system is the key part of HLS control system, it is used for archiving beam parameters, real-time equipment data, alarm records, etc. The Archive Engine of RDB Channel Archiver is used for collecting data from Input Output Controllers of HLS control system and storing in Oracle database. Webpages based on JSP are developed for data inquiry and statistics, with which the data processing and analyzing can be more efficient for operators and researchers. Thus the system can meet the requirements of the HLS machine operation and machine research. (authors)

  17. Information System Design

    OpenAIRE

    Sedlák, Marek

    2016-01-01

    The diploma thesis focuses on design of the information system for the department of medical transport service, which is part of the hospital. This thesis describes the theoretical knowledge necessary for analysis and custom design, is also concerned with the analysis of the current state of processes and information system. Last but not least, based on the analysis and the requirements lays down suggestions for improvement of the information system and design of optimal information system, t...

  18. NetCDF based data archiving system applied to ITER Fast Plant System Control prototype

    Energy Technology Data Exchange (ETDEWEB)

    Castro, R., E-mail: rodrigo.castro@visite.es [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); Vega, J. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); Ruiz, M.; De Arcas, G.; Barrera, E.; Lopez, J.M.; Sanz, D. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, UPM, Madrid (Spain); Goncalves, B.; Santos, B. [Associacao EURATOM/IST, IPFN - Laboratorio Associado, IST, Lisboa (Portugal); Utzel, N.; Makijarvi, P. [ITER Organization, St. Paul lez Durance Cedex (France)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Implementation of a data archiving solution for a Fast Plant System Controller (FPSC) for ITER CODAC. Black-Right-Pointing-Pointer Data archiving solution based on scientific NetCDF-4 file format and Lustre storage clustering. Black-Right-Pointing-Pointer EPICS control based solution. Black-Right-Pointing-Pointer Tests results and detailed analysis of using NetCDF-4 and clustering technologies on fast acquisition data archiving. - Abstract: EURATOM/CIEMAT and Technical University of Madrid (UPM) have been involved in the development of a FPSC (Fast Plant System Control) prototype for ITER, based on PXIe (PCI eXtensions for Instrumentation). One of the main focuses of this project has been data acquisition and all the related issues, including scientific data archiving. Additionally, a new data archiving solution has been developed to demonstrate the obtainable performances and possible bottlenecks of scientific data archiving in Fast Plant System Control. The presented system implements a fault tolerant architecture over a GEthernet network where FPSC data are reliably archived on remote, while remaining accessible to be redistributed, within the duration of a pulse. The storing service is supported by a clustering solution to guaranty scalability, so that FPSC management and configuration may be simplified, and a unique view of all archived data provided. All the involved components have been integrated under EPICS (Experimental Physics and Industrial Control System), implementing in each case the necessary extensions, state machines and configuration process variables. The prototyped solution is based on the NetCDF-4 (Network Common Data Format) file format in order to incorporate important features, such as scientific data models support, huge size files management, platform independent codification, or single-writer/multiple-readers concurrency. In this contribution, a complete description of the above mentioned solution

  19. Reactor System Design

    International Nuclear Information System (INIS)

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  20. Description of an acquisition, management and archiving system for digital images

    International Nuclear Information System (INIS)

    A digitalizing and archiving system, for radiologic pictures is presented. This system is composed by a camera, a microcomputer (Maclntosh II) with a digitalizing card and a great capacity optical disk (WORM) for storage. Acquiring and archiving are automatically driven by a special soft. The principal qualities of this system are simplicity for the user, speed and low cost

  1. Architecture analysis for European Long-Term Archiving EO systems

    Science.gov (United States)

    Garcia Gil, I.; Perez Moreno, R.; Perez Navarro, O.; Leone, R.

    2012-04-01

    Over the last ten years there has been a strongly increased need for access to historical Earth Observation (EO) data series, mainly for long term science and environmental monitoring applications. As the contents of EO space data archives increases from a few years duration to a period of decades their scientific values increases dramatically. The main objective of this Long Term Data Preservation(LTDP) initiative is to guarantee the long term preservation of the data from all EO ESA and Third Parties ESA managed missions, while also ensuring their accessibility and usability, as part of a joint and cooperative approach in Europe aimed at preserving the EO European data from member states' missions. To allow the maximum value to be extracted from the data, it is well recognized that there is a need to preserve this data without time limitations, while keeping all archived data accessible and exploitable. This will be even more of a challenge in the coming years, as the large number of upcoming Earth Observation missions will lead to a major increase in the available volume of EO data The LTDP Impact Analysis and Architecture Definition project (for simplicity known as LTDP-IMPACTS) aims to define and consolidate the architecture of European Long-Term Archiving EO systems, especially in the context of ESA PDGS. To do this, we shall perform a complete assessment of the impacts of implementing the guidelines from the LTDP initiative. This assessment will be over all timescales, short, middle and long-term, and must take into account all systems involved, from the point of view of "System of System" (SoS), and their data flows, data sets and their related operational policies for LTDP implementation The LTDP guidelines, and the standards adopted as a result, will have various impacts on the legacy and future long term archiving systems, the systems used to access them, and on the overall operational concept. This will particularly apply to the ESA PDGS environment

  2. Rigorous System Design

    OpenAIRE

    Sifakis, Joseph

    2012-01-01

    The monograph advocates rigorous system design as a coherent and accountable model-based process leading from requirements to correct implementations. It presents the current state of the art in system design, discusses its limitations, and identifies possible avenues for overcoming them. A rigorous system design flow is defined as a formal accountable and iterative process composed of steps, and based on four principles: (1) separation of concerns; (2) component-based construction; (3) sema...

  3. Optical system design

    CERN Document Server

    Fischer, Robert F

    2008-01-01

    Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

  4. A Case Study in Collaboration: Looking Back at the National Graphic Design Archive

    Science.gov (United States)

    Remington, R. Roger

    2004-01-01

    Inspired by the 1980s interest in graphic design history, an initially productive, but difficult to sustain, collaboration among three American universities from the late 1980s to the mid-1990s, is the subject of this case study. The ideas behind a much-needed archival consortium, its organization and its difficulties in sustaining collaboration…

  5. An optical disk archive for a data base management system

    Science.gov (United States)

    Thomas, Douglas T.

    1985-01-01

    An overview is given of a data base management system that can catalog and archive data at rates up to 50M bits/sec. Emphasis is on the laser disk system that is used for the archive. All key components in the system (3 Vax 11/780s, a SEL 32/2750, a high speed communication interface, and the optical disk) are interfaced to a 100M bits/sec 16-port fiber optic bus to achieve the high data rates. The basic data unit is an autonomous data packet. Each packet contains a primary and secondary header and can be up to a million bits in length. The data packets are recorded on the optical disk at the same time the packet headers are being used by the relational data base management software ORACLE to create a directory independent of the packet recording process. The user then interfaces to the VAX that contains the directory for a quick-look scan or retrieval of the packet(s). The total system functions are distributed between the VAX and the SEL. The optical disk unit records the data with an argon laser at 100M bits/sec from its buffer, which is interfaced to the fiber optic bus. The same laser is used in the read cycle by reducing the laser power. Additional information is given in the form of outlines, charts, and diagrams.

  6. NVST Data Archiving System Based On FastBit NoSQL Database

    Science.gov (United States)

    Liu, Ying-bo; Wang, Feng; Ji, Kai-fan; Deng, Hui; Dai, Wei; Liang, Bo

    2014-06-01

    The New Vacuum Solar Telescope (NVST) is a 1-meter vacuum solar telescope that aims to observe the fine structures of active regions on the Sun. The main tasks of the NVST are high resolution imaging and spectral observations, including the measurements of the solar magnetic field. The NVST has been collecting more than 20 million FITS files since it began routine observations in 2012 and produces a maximum observational records of 120 thousand files in a day. Given the large amount of files, the effective archiving and retrieval of files becomes a critical and urgent problem. In this study, we implement a new data archiving system for the NVST based on the Fastbit Not Only Structured Query Language (NoSQL) database. Comparing to the relational database (i.e., MySQL; My Structured Query Language), the Fastbit database manifests distinctive advantages on indexing and querying performance. In a large scale database of 40 million records, the multi-field combined query response time of Fastbit database is about 15 times faster and fully meets the requirements of the NVST. Our study brings a new idea for massive astronomical data archiving and would contribute to the design of data management systems for other astronomical telescopes.

  7. Practical issues in picture archiving and communication system and networking

    International Nuclear Information System (INIS)

    Picture Archiving and Communication System (PACS) is a key workflow tool in the functioning of radiology departments worldwide, today, and its utilization is rapidly growing in India. The key challenges in PACS implementation are related to vendor and feature selection, integration with the existing HIS, user training, maintenance and scalability to meet increasing demands. Additionally, the networking requirements that PACS imposes on hospital networks are not insignificant. This article attempts to review these issues from the standpoint of what a prospective or new user needs to know

  8. Web Services interface of SSRF archive data analysis system

    Institute of Scientific and Technical Information of China (English)

    LI Lin; SHEN Liren; ZHU Qing; WAN Tianmin

    2007-01-01

    Accelerator database stores various static parameters and real-time data of accelerator. SSRF (Shanghai Synchrotron Radiation Facility) adopts relational database to save the data. We developed a data retrieval system based on XML Web Services for accessing the archive data. It includes a bottom layer interface and an interface applicable for accelerator physics. Client samples exemplifying how to consume the interface are given. The users can browse, retrieve and plot data by the client samples. Also, we give a method to test its stability. The test result and performance are described.

  9. Designing Simulation Systems

    Science.gov (United States)

    Twelker, Paul A.

    1969-01-01

    "The purpose of this paper is to outline the approach to designing instructional simulation systems developed at Teaching Research. The 13 phases of simulation design will be summarized, and an effort will be made to expose the vital decision points that confront the designer as he develops simulation experiences. (Author)

  10. HVAC systems design handbook

    CERN Document Server

    Haines, Roger W

    2010-01-01

    Thoroughly updated with the latest codes, technologies, and practices, this all-in-one resource provides details, calculations, and specifications for designing efficient and effective residential, commercial, and industrial HVAC systems. HVAC Systems Design Handbook, Fifth Edition, features new information on energy conservation and computer usage for design and control, as well as the most recent International Code Council (ICC) Mechanical Code requirements. Detailed illustrations, tables, and essential HVAC equations are also included. This comprehensive guide contains everything you need to design, operate, and maintain peak-performing HVAC systems.

  11. Design an Information System

    OpenAIRE

    Koch, Libor

    2016-01-01

    Main object of this thesis is design information system for warehouse management for Fi & Ho Trading Company, which will be accessible through web. Warehouse will be based on portal technology and connected with E-shop. In this thesis will be described elements of information system, resources used for realization, processes coverage by information system and complex evaluation of this information system.

  12. The NEEDS Data Base Management and Archival Mass Memory System

    Science.gov (United States)

    Bailey, G. A.; Bryant, S. B.; Thomas, D. T.; Wagnon, F. W.

    1980-01-01

    A Data Base Management System and an Archival Mass Memory System are being developed that will have a 10 to the 12th bit on-line and a 10 to the 13th off-line storage capacity. The integrated system will accept packetized data from the data staging area at 50 Mbps, create a comprehensive directory, provide for file management, record the data, perform error detection and correction, accept user requests, retrieve the requested data files and provide the data to multiple users at a combined rate of 50 Mbps. Stored and replicated data files will have a bit error rate of less than 10 to the -9th even after ten years of storage. The integrated system will be demonstrated to prove the technology late in 1981.

  13. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  14. Psychology of system design

    CERN Document Server

    Meister, D

    2014-01-01

    This is a book about systems, including: systems in which humans control machines; systems in which humans interact with humans and the machine component is relatively unimportant; systems which are heavily computerized and those that are not; and governmental, industrial, military and social systems. The book deals with both traditional systems like farming, fishing and the military, and with systems just now tentatively emerging, like the expert and the interactive computer system. The emphasis is on the system concept and its implications for analysis, design and evaluation of these many di

  15. Gaia archive

    CERN Document Server

    Hypki, Arkadiusz

    2016-01-01

    The Gaia archive is being designed and implemented by the DPAC Consortium. The purpose of the archive is to maximize the scientific exploitation of the Gaia data by the astronomical community. Thus, it is crucial to gather and discuss with the community the features of the Gaia archive as much as possible. It is especially important from the point of view of the GENIUS project to gather the feedback and potential use cases for the archive. This paper presents very briefly the general ideas behind the Gaia archive and presents which tools are already provided to the community.

  16. Control system design method

    Science.gov (United States)

    Wilson, David G.; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  17. Resilient computer system design

    CERN Document Server

    Castano, Victor

    2015-01-01

    This book presents a paradigm for designing new generation resilient and evolving computer systems, including their key concepts, elements of supportive theory, methods of analysis and synthesis of ICT with new properties of evolving functioning, as well as implementation schemes and their prototyping. The book explains why new ICT applications require a complete redesign of computer systems to address challenges of extreme reliability, high performance, and power efficiency. The authors present a comprehensive treatment for designing the next generation of computers, especially addressing safety-critical, autonomous, real time, military, banking, and wearable health care systems.   §  Describes design solutions for new computer system - evolving reconfigurable architecture (ERA) that is free from drawbacks inherent in current ICT and related engineering models §  Pursues simplicity, reliability, scalability principles of design implemented through redundancy and re-configurability; targeted for energy-,...

  18. Remote Systems Design & Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  19. Digital systems design language

    Science.gov (United States)

    Shiva, S. G.

    1979-01-01

    Digital Systems Design Language (DDL) is implemented on the SEL-32 Computer Systems. The detaileds of the language, the translator, and the simulator, and the smulator programs are given. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

  20. Contents of the NASA ocean data system archive, version 11-90

    Science.gov (United States)

    Smith, Elizabeth A. (Editor); Lassanyi, Ruby A. (Editor)

    1990-01-01

    The National Aeronautics and Space Administration (NASA) Ocean Data System (NODS) archive at the Jet Propulsion Laboratory (JPL) includes satellite data sets for the ocean sciences and global-change research to facilitate multidisciplinary use of satellite ocean data. Parameters include sea-surface height, surface-wind vector, sea-surface temperature, atmospheric liquid water, and surface pigment concentration. NODS will become the Data Archive and Distribution Service of the JPL Distributed Active Archive Center for the Earth Observing System Data and Information System (EOSDIS) and will be the United States distribution site for Ocean Topography Experiment (TOPEX)/POSEIDON data and metadata.

  1. Role of the multi-modality image archival and communication system in nuclear medicine

    International Nuclear Information System (INIS)

    algorithm design. The complete PACS system with the Internet based telecommunication part according to the clinical requirements has been created and is continuously upgraded with the support and collaboration of three domestic companies. Currently 3 modalities - CT, nuclear medicine (NM), digitised mammography - are available and can be accessed in our institute from more than 15 workstations. Additionally, other extemal institutes -Dept. of Neurology, Dept. of Orthopaedics, 1st Surgical Clinic, Budapest University of Technology and Economics, Dept. of Measurement and Informatics System- are connected to our central archives and can access the necessary and/or available modalities for both routine clinical applications and research purposes according to the access rights rule. The created system works more than a year continuously under the described circumstances and participates intensively in the research (advisory systems for non-invasive studies), education, and daily clinical routine activities. Nowadays, the simultaneous presentation and post processing of the functional and morphological images plays more and more important role in order to make more reliable and quick clinical decision by non-invasive way (both functional and morphological modalities are developing very rapidly). This technology is outstandingly effective in the fields of consultation (even if it is combined by MMS), post processing and tele-evaluation as well as education. eRAD ImageMedicalTM created in Palo Alto (USA, CA) a training real patient database with various digital radiological images in their PACS in order to learn and test the feasibility of the system. (authors)

  2. Integrated system design report

    Energy Technology Data Exchange (ETDEWEB)

    1989-07-01

    The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

  3. Development of a research dedicated archival system (TARAS) in a university hospital.

    Science.gov (United States)

    Rajala, Tiina; Savio, Sami; Penttinen, Jarkko; Dastidar, Prasun; Kähönen, Mika; Eskola, Hannu; Miettunen, Risto; Turjanmaa, Väinö; Järvenpää, Ritva

    2011-10-01

    Recent healthcare policies have influenced the manner in which patient data is handled in research projects, and the regulations concerning protected health information have become significantly tighter. Thus, new procedures are needed to facilitate research while protecting the confidentiality of patient data and ensuring the integrity of clinical work in the expanding environment of electronic files and databases. We have addressed this problem in a university hospital setting by developing the Tampere Research Archival System (TARAS), an extensive data warehouse for research purposes. This dynamic system includes numerous integrated and pseudonymized imaging studies and clinical data. In a pilot study on asthma patients, we tested and improved the functionality of the data archival system. TARAS is feasible to use in retrieving, analyzing, and processing both image and non-image data. In this paper, we present a detailed workflow of the implementation process of the data warehouse, paying special attention to administrative, ethical, practical, and data security concerns. The establishment of TARAS will enhance and accelerate research practice at Tampere University Hospital, while also improving the safety of patient information as well as the prospects for national and international research collaboration. We hope that much can be learned from our experience of planning, designing, and implementing a research data warehouse combining imaging studies and medical records in a university hospital.

  4. Designing Deliberation Systems

    DEFF Research Database (Denmark)

    Rose, Jeremy; Sæbø, Øystein

    2010-01-01

    In a liberal democracy, the evolution of political agendas and formation of policy involves deliberation: serious consideration of political issues.  Modern day political participation is dependent on widespread deliberation supported by information and communication technologies, which also offer...... the potential to revitalize and transform citizen engagement in democracy.  Although the majority of web 2.0 systems enable these discourses to some extent, government institutions commission and manage specialized deliberation systems (information systems designed to support participative discourse) intended.......  In this article we analyze the issues involved in establishing political deliberation systems under four headings: stakeholder engagement, web platform design, service management, political process re-shaping and evaluation and improvement.  We review the existing literature and present a longitudinal case study...

  5. A prototype data archive for the PIER 'thermal distribution systems in commercial buildings' project

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, Rick C.; Wray, Craig P.; Smith, Brian V.; Dickerhoff, Darryl J.; Matson, Nance E.; Cox, Skylar A.

    2004-01-01

    A prototype archive for a selection of building energy data on thermal distribution systems in commercial buildings was developed and pilot tested. While the pilot demonstrated the successful development of the data archive prototype, several questions remain about the usefulness of such an archive. Specifically, questions on the audience, frequency of use, maintenance, and updating of the archive would need to be addressed before this prototype is taken to the next level.

  6. The Fifth Workshop on HPC Best Practices: File Systems and Archives

    Energy Technology Data Exchange (ETDEWEB)

    Hick, Jason; Hules, John; Uselton, Andrew

    2011-11-30

    The workshop on High Performance Computing (HPC) Best Practices on File Systems and Archives was the fifth in a series sponsored jointly by the Department Of Energy (DOE) Office of Science and DOE National Nuclear Security Administration. The workshop gathered technical and management experts for operations of HPC file systems and archives from around the world. Attendees identified and discussed best practices in use at their facilities, and documented findings for the DOE and HPC community in this report.

  7. Picture archiving and communication system planning as a whole practice in step by step

    International Nuclear Information System (INIS)

    Objective: To discuss the whole design and to carry through the implement project in building picture archiving and communication system (PACS). Methods: All modalities with or without DICOM were integrated into PACS to store the whole images and share those resources. Windows NT and SQL 7.0 were used on the servers to store all kinds of patient image files, and those images could be viewed on all the web-based clinical workstations and the license was up to 100. RAID 5 online HDD which had the capability to store images for 3 months and DLT long term archive storage up to 7 T in size were built in the system. The PACS already finished the integration with RIS and HIS to expand images to the whole hospital and ready to be an imaging center of one area. Results: The founded typical PACS connected hospital equipments at present and realized primary no-film mode in department of radiology. The PACS had extended to the whole hospital clinical rooms, surgery, and emergency treatment room, etc. The PACS was connected to the HIS and networks of other hospitals. The center of image data was established, realizing the connection among the center of image data together with current area and other area hospitals. The PACS was easy to use for the doctors and improved the work efficiency. Conclusion: The practice has proved that current project related PACS planning as a whold practice in step by step is viable and successful

  8. Systems engineering agile design methodologies

    CERN Document Server

    Crowder, James A

    2013-01-01

    This book examines the paradigm of the engineering design process. The authors discuss agile systems and engineering design. The book captures the entire design process (functionbases), context, and requirements to affect real reuse. It provides a methodology for an engineering design process foundation for modern and future systems design. This book captures design patterns with context for actual Systems Engineering Design Reuse and contains a new paradigm in Design Knowledge Management.

  9. Intelligent design system for design automation

    Science.gov (United States)

    Shakeri, Cirrus; Deif, Ismail; Katragadda, Prasanna; Knutson, Stanley

    2000-10-01

    In order to succeed in today's global, competitive market, companies need continuous improvements in their product development processes. These improvements should result in expending fewer resources on the design process while achieving better quality. Automating the design process reduces resources needed and allows designers to spend more time on creative aspects that improve the quality of design. For the last three decades, engineers and designers have been searching for better ways to automate the product development process. For certain classes of design problems, which cover a large portion of real world design situations, the process can be automated using knowledge-based systems. These are design problems in which the knowledge sources are known in advance. Using techniques from Knowledge-Based Engineering, knowledge is codified and inserted into a knowledge-based system. The system activates the design knowledge, automatically generating designs that satisfy the design constraints. To increase the return on investment of building automated design systems, Knowledge management methodologies and techniques are required for capturing, formalizing, storing, and searching design knowledge.

  10. Picture archiving and communication systems in digital cytology.

    Science.gov (United States)

    Morelli, Sandra; Grigioni, Mauro; Giovagnoli, Maria Rosaria; Balzano, Simone; Giansanti, Daniele

    2010-01-01

    The paper describes a fundamental feature of digital cytology relevant to the implementation of the technology in the hospital net services: the electronic recording of the virtual slides (VS) in the hospital information system (HIS) through a picture archiving and communication system (PACS). Starting from the digital cytology (D-CYT) state of art and considering the most important products in the field, particular attention has been devoted in this review to the comparison with the digital radiology (D-RAD). Two main indications emerged from the study: 1. there is not a standard in the digital files relevant to the virtual slides in D-CYT, while in D-RAD the standard digital imaging and communications in medicine (DICOM), introduced by the National Electrical Manufacturers Association (NEMA), has been adopted from several years; 2. the PACS in D-CYT are not standardized from manufacturers. The study makes a proposal of a useful software architecture to improve the PACS integration for D-CYT applications, with potentialities in the HIS.

  11. Picture archiving and communication systems in digital cytology

    Directory of Open Access Journals (Sweden)

    Sandra Morelli

    2010-06-01

    Full Text Available The paper describes a fundamental feature of digital cytology relevant to the implementation of the technology in the hospital net services: the electronic recording of the virtual slides (VS in the hospital information system (HIS through a picture archiving and communication system (PACS. Starting from the digital cytology (D-CYT state of art and considering the most important products in the field, particular attention has been devoted in this review to the comparison with the digital radiology (D-RAD. Two main indications emerged from the study: 1. there is not a standard in the digital files relevant to the virtual slides in D-CYT, while in D-RAD the standard digital imaging and communications in medicine (DICOM, introduced by the National Electrical Manufacturers Association (NEMA, has been adopted from several years; 2. the PACS in D-CYT are not standardized from manufacturers. The study makes a proposal of a useful software architecture to improve the PACS integration for D-CYT applications, with potentialities in the HIS.

  12. Architecture Studio Archive: A Case Study in the Comprehensive Digital Capture and Repository of Student Design Work as an Aid to Teaching, Research, and Accreditation

    Science.gov (United States)

    Anderson, Ross; Arndell, Michael; Christensen, Sten

    2009-01-01

    The "Architecture Studio Archive" pilot sought to form a comprehensive digital archive of the diverse student work conducted in the first year of the Bachelor of Design in Architecture Degree at the University of Sydney. The design studio is the primary vehicle for teaching architectural design. It is a locus for creative activity, with students…

  13. Archiving in the networked world

    OpenAIRE

    Seadle, Michael

    2011-01-01

    Purpose – This paper aims to focus on how long-term digital archiving systems are tested and what benchmarks and other metrics are necessary for that testing to produce data that the community can use to make decisions. Design/methodology/approach – The article reviews recent literature about digital archiving systems involving public and semi-public tests. It then looks specifically at the rules and metrics needed for doing public or semi-public testing for three specific issues: triggeri...

  14. Security model for picture archiving and communication systems.

    Science.gov (United States)

    Harding, D B; Gac, R J; Reynolds, C T; Romlein, J; Chacko, A K

    2000-05-01

    The modern information revolution has facilitated a metamorphosis of health care delivery wrought with the challenges of securing patient sensitive data. To accommodate this reality, Congress passed the Health Insurance Portability and Accountability Act (HIPAA). While final guidance has not fully been resolved at this time, it is up to the health care community to develop and implement comprehensive security strategies founded on procedural, hardware and software solutions in preparation for future controls. The Virtual Radiology Environment (VRE) Project, a landmark US Army picture archiving and communications system (PACS) implemented across 10 geographically dispersed medical facilities, has addressed that challenge by planning for the secure transmission of medical images and reports over their local (LAN) and wide area network (WAN) infrastructure. Their model, which is transferable to general PACS implementations, encompasses a strategy of application risk and dataflow identification, data auditing, security policy definition, and procedural controls. When combined with hardware and software solutions that are both non-performance limiting and scalable, the comprehensive approach will not only sufficiently address the current security requirements, but also accommodate the natural evolution of the enterprise security model. PMID:10847401

  15. ASTRI SST-2M Data Handling and Archiving System

    CERN Document Server

    Antonelli, L Angelo; Lucarelli, Fabrizio; Testa, Vincenzo; Trifoglio, Massimo; Bastieri, Denis; Bulgarelli, Andrea; Capalbi, Milvia; Carosi, Alessandro; Conforti, Vito; Di Paola, Andrea; Gallozzi, Stefano; Gianotti, Fulvio; Perri, Matteo; Tosti, Gino; Rubini, Alda; Vercellone, Stefano

    2013-01-01

    The ASTRI project is the INAF (Italian National Institute for Astrophysics) flagship project developed in the context of the Cherenkov Telescope Array (CTA) international project. ASTRI is dedicated to the realization of the prototype of a Cherenkov small-size dual-mirror telescope (SST-2M) and then to the realization of a mini-array composed of a few of these units. The prototype and all the necessary hardware devices are foreseen to be installed at the Serra La Nave Observing Station (Catania, Italy) in 2014. The upcoming data flow will be properly reduced by dedicated (online and offline) analysis pipelines aimed at providing robust and reliable scientific results (signal detection, sky maps, spectra and light curves) from the ASTRI silicon photo-multipliers camera raw data. Furthermore, a flexible archiving system has being conceived for the storage of all the acquired ASTRI (scientific, calibration, housekeeping) data at different steps of the data reduction up to the final scientific products. In this c...

  16. An archived multi-objective simulated annealing for a dynamic cellular manufacturing system

    Science.gov (United States)

    Shirazi, Hossein; Kia, Reza; Javadian, Nikbakhsh; Tavakkoli-Moghaddam, Reza

    2014-05-01

    To design a group layout of a cellular manufacturing system (CMS) in a dynamic environment, a multi-objective mixed-integer non-linear programming model is developed. The model integrates cell formation, group layout and production planning (PP) as three interrelated decisions involved in the design of a CMS. This paper provides an extensive coverage of important manufacturing features used in the design of CMSs and enhances the flexibility of an existing model in handling the fluctuations of part demands more economically by adding machine depot and PP decisions. Two conflicting objectives to be minimized are the total costs and the imbalance of workload among cells. As the considered objectives in this model are in conflict with each other, an archived multi-objective simulated annealing (AMOSA) algorithm is designed to find Pareto-optimal solutions. Matrix-based solution representation, a heuristic procedure generating an initial and feasible solution and efficient mutation operators are the advantages of the designed AMOSA. To demonstrate the efficiency of the proposed algorithm, the performance of AMOSA is compared with an exact algorithm (i.e., ∈-constraint method) solved by the GAMS software and a well-known evolutionary algorithm, namely NSGA-II for some randomly generated problems based on some comparison metrics. The obtained results show that the designed AMOSA can obtain satisfactory solutions for the multi-objective model.

  17. Archives and the computer

    CERN Document Server

    Cook, Michael Garnet

    1986-01-01

    Archives and the Computer deals with the use of the computer and its systems and programs in archiving data and other related materials. The book covers topics such as the scope of automated systems in archives; systems for records management, archival description, and retrieval; and machine-readable archives. The selection also features examples of archives from different institutions such as the University of Liverpool, Berkshire County Record Office, and the National Maritime Museum.The text is recommended for archivists who would like to know more about the use of computers in archiving of

  18. Rethinking Embedded System Design

    Directory of Open Access Journals (Sweden)

    Subhendu Das

    2012-04-01

    Full Text Available Embedded engineering is designed using objects of nature and it also interacts with nature.Therefore it is forced to obey the laws of nature. Nature does not make any assumptions. But allour mathematical and scientific theories do. Therefore these theories cannot be valid forembedded engineering applications. In this paper we present four new laws of nature that allembedded systems follow. These laws are (1 Boundedness (2 Finite time (3 Simultaneity and(4 Complexity. During the last fifty years embedded analog and digital engineering have evolvedand changed significantly. However our mathematical and scientific theories remained in theoriginal state. We select several theories commonly used in embedded engineering and showthat none of them satisfy these laws. As a result, when we implement these theories in ourembedded software, we are forced to add so many patches and kludges to make the engineeringwork, that our systems become very unreliable.

  19. Design Language for Digital Systems

    Science.gov (United States)

    Shiva, S. G.

    1985-01-01

    Digital Systems Design Language (DDL) is convenient hardware description language for developing and testing digital designs and for inputting design details into design automation system. Describes digital systems at gate, register transfer, and combinational block levels. DDL-based programs written in FORTRAN IV for batch execution.

  20. A Framework for Systemic Design

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available As designers move upstream from traditional product and service design to engage with challenges characterised by complexity, uniqueness, value conflict, and ambiguity over objectives, they have increasingly integrated systems approaches into their practice. This synthesis of systems thinking with design thinking is forming a distinct new field of systemic design. This paper presents a framework for systemic design as a mindset, methodology, and set of methods that together enable teams to learn, innovate, and adapt to a complex and dynamic environment. We suggest that a systemic design mindset is inquiring, open, integrative, collaborative, and centred. We propose a systemic design methodology composed of six main activities: framing, formulating, generating, reflecting, inquiring, and facilitating. We view systemic design methods as a flexible and open-ended set of procedures for facilitating group collaboration that are both systemic and designerly.  

  1. Clinical data compression with a picture archiving and communications system image workstation

    International Nuclear Information System (INIS)

    The picture archiving communications system (PACS) started in 1985 at Kyoto University Hospital has been working for 4 years in a clinical environment. Three x-ray CT, MR imaging, chest radiography, and digital subtraction angiography (DSAs) units have already been linked with the system. Because the long-term archiving of the image data and the increase in the number of image modalities have caused system overload, efforts should be made to reduce the image data. This paper reports on an image workstation with a personal computer to create an image summary with reporting system

  2. Streaming the Archives: Repurposing Systems to Advance a Small Media Digitization and Dissemination Program

    Science.gov (United States)

    Anderson, Talea

    2015-01-01

    In 2013-2014, Brooks Library at Central Washington University (CWU) launched library content in three systems: a digital asset-management system, an institutional repository (IR), and a web-based discovery layer. In early 2014, the archives at the library began to use these systems to disseminate media recently digitized from legacy formats. As…

  3. Archiving the Airwaves: Accountability of the Dutch Public Broadcasting System

    NARCIS (Netherlands)

    J.M.C. Snoeren (Jasper)

    2016-01-01

    textabstractCombining television studies, archival studies and cultural history, this thesis asks the question to what extent public broadcasters in the Netherlands are keeping substantive and operational records that would allow for cultural accountability. Because of the unique setup of the Dutch

  4. Statistical design for microwave systems

    Science.gov (United States)

    Cooke, Roland; Purviance, John

    1991-01-01

    This paper presents an introduction to statistical system design. Basic ideas needed to understand statistical design and a method for implementing statistical design are presented. The nonlinear characteristics of the system amplifiers and mixers are accounted for in the given examples. The specification of group delay, signal-to-noise ratio and output power are considered in these statistical designs.

  5. Issues in holistic system design

    DEFF Research Database (Denmark)

    Lawall, Julia L.; Probst, Christian W.; Schultz, Ulrik Pagh

    2006-01-01

    The coordination of layers in computer and software systems is one of the main challenges in designing such systems today. In this paper we consider Holistic System Design as a way of integrating requirements and facilities of different system layers. We also discuss some of the challenges that t...... that this kind of system design poses for computer science in general as well as programming languages and operating systems in particular....

  6. Design inspections for systems undergoing design modifications

    Energy Technology Data Exchange (ETDEWEB)

    Grimes, B.K.; Norkin, D.P.

    1987-01-01

    The US Nuclear Regulatory Commission's (NRC's) Office of Inspection and Enforcement (IE) has conducted direct inspections (integrated design inspections) of the technical aspects of the nuclear plant design process for several plants under construction. It has also evaluated independent design verification programs and engineering assurance programs at a number of other plants under construction. Many of the lessons learned from these construction phase efforts are directly applicable to operating plants undergoing major modifications. This has been confirmed by IE direct inspections of the design aspects of safety systems outage modifications, which have identified significant potential safety-related deficiencies. The paper discusses methodology for design inspections; failure to maintain up-to-date design basis documentation; and lessons learned common to plants under construction and undergoing major modifications.

  7. LUNARINFO:A Data Archiving and Retrieving System for the Circumlunar Explorer Based on XML/Web Services

    Institute of Scientific and Technical Information of China (English)

    ZUO Wei; LI Chunlai; OUYANG Ziyuan; LIU Jianjun; XU Tao

    2004-01-01

    It is essential to build a modem information management system to store and manage data of our circumlunar explorer in order to realize the scientific objectives. It is difficult for an information system based on traditional distributed technology to communicate information and work together among heterogeneous systems in order to meet the new requirement of Intemet development. XML and Web Services, because of their open standards and self-containing properties, have changed the mode of information organization and data management. Now they can provide a good solution for building an open, extendable, and compatible information management system, and facilitate interchanging and transferring of data among heterogeneous systems. On the basis of the three-tiered browse/server architectures and the Oracle 9i Database as an information storage platform, we have designed and implemented a data archiving and retrieval system for the circumlunar explorer-LUNARINFO. We have also successfully realized the integration between LUNARINFO and the cosmic dust database system. LUNARINFO consists of five function modules for data management, information publishing, system management, data retrieval, and interface integration. Based on XML and Web Services, it not only is an information database system for archiving, long-term storing, retrieving and publication of lunar reference data related to the circumlunar explorer, but also provides data web Services which can be easily developed by various expert groups and connected to the common information system to realize data resource integration.

  8. Design management of EDI systems.

    NARCIS (Netherlands)

    Heck, van E.

    1993-01-01

    This study deals with the management of the design process of Electronic Data Interchange (EDI) systems. Its objectives are (1) to investigate the design process of EDI systems from a practical and theoretical perspective; (2) to develop a model to describe factors relevant to EDI system-design succ

  9. THREE DIMENSIONAL INTEGRATED CHARACTERIZATION AND ARCHIVING SYSTEM (3D-ICAS)

    Energy Technology Data Exchange (ETDEWEB)

    George Jarvis

    2001-06-18

    The overall objective of this project is to develop an integrated system that remotely characterizes, maps, and archives measurement data of hazardous decontamination and decommissioning (D&D) areas. The system will generate a detailed 3-dimensional topography of the area as well as real-time quantitative measurements of volatile organics and radionuclides. The system will analyze substrate materials consisting of concrete, asbestos, and transite. The system will permanently archive the data measurements for regulatory and data integrity documentation. Exposure limits, rest breaks, and donning and removal of protective garments generate waste in the form of contaminated protective garments and equipment. Survey times are increased and handling and transporting potentially hazardous materials incur additional costs. Off-site laboratory analysis is expensive and time-consuming, often necessitating delay of further activities until results are received. The Three Dimensional Integrated Characterization and Archiving System (3D-ICAS) has been developed to alleviate some of these problems. 3D-ICAS provides a flexible system for physical, chemical and nuclear measurements reduces costs and improves data quality. Operationally, 3D-ICAS performs real-time determinations of hazardous and toxic contamination. A prototype demonstration unit is available for use in early 2000. The tasks in this Phase included: (1) Mobility Platforms: Integrate hardware onto mobility platforms, upgrade surface sensors, develop unit operations and protocol. (2) System Developments: Evaluate metals detection capability using x-ray fluorescence technology. (3) IWOS Upgrades: Upgrade the IWOS software and hardware for compatibility with mobility platform. The system was modified, tested and debugged during 1999 and 2000. The 3D-ICAS was shipped on 11 May 2001 to FIU-HCET for demonstration and validation of the design modifications. These modifications included simplifying the design from a two

  10. DEVELOPMENT OF TIME-SERIES HUMAN SETTLEMENT MAPPING SYSTEM USING HISTORICAL LANDSAT ARCHIVE

    Directory of Open Access Journals (Sweden)

    H. Miyazaki

    2016-06-01

    Full Text Available Methodology of automated human settlement mapping is highly needed for utilization of historical satellite data archives for urgent issues of urban growth in global scale, such as disaster risk management, public health, food security, and urban management. As development of global data with spatial resolution of 10-100 m was achieved by some initiatives using ASTER, Landsat, and TerraSAR-X, next goal has targeted to development of time-series data which can contribute to studies urban development with background context of socioeconomy, disaster risk management, public health, transport and other development issues. We developed an automated algorithm to detect human settlement by classification of built-up and non-built-up in time-series Landsat images. A machine learning algorithm, Local and Global Consistency (LLGC, was applied with improvements for remote sensing data. The algorithm enables to use MCD12Q1, a MODIS-based global land cover map with 500-m resolution, as training data so that any manual process is not required for preparation of training data. In addition, we designed the method to composite multiple results of LLGC into a single output to reduce uncertainty. The LLGC results has a confidence value ranging 0.0 to 1.0 representing probability of built-up and non-built-up. The median value of the confidence for a certain period around a target time was expected to be a robust output of confidence to identify built-up or non-built-up areas against uncertainties in satellite data quality, such as cloud and haze contamination. Four scenes of Landsat data for each target years, 1990, 2000, 2005, and 2010, were chosen among the Landsat archive data with cloud contamination less than 20%.We developed a system with the algorithms on the Data Integration and Analysis System (DIAS in the University of Tokyo and processed 5200 scenes of Landsat data for cities with more than one million people worldwide.

  11. Development of Time-Series Human Settlement Mapping System Using Historical Landsat Archive

    Science.gov (United States)

    Miyazaki, H.; Nagai, M.; Shibasaki, R.

    2016-06-01

    Methodology of automated human settlement mapping is highly needed for utilization of historical satellite data archives for urgent issues of urban growth in global scale, such as disaster risk management, public health, food security, and urban management. As development of global data with spatial resolution of 10-100 m was achieved by some initiatives using ASTER, Landsat, and TerraSAR-X, next goal has targeted to development of time-series data which can contribute to studies urban development with background context of socioeconomy, disaster risk management, public health, transport and other development issues. We developed an automated algorithm to detect human settlement by classification of built-up and non-built-up in time-series Landsat images. A machine learning algorithm, Local and Global Consistency (LLGC), was applied with improvements for remote sensing data. The algorithm enables to use MCD12Q1, a MODIS-based global land cover map with 500-m resolution, as training data so that any manual process is not required for preparation of training data. In addition, we designed the method to composite multiple results of LLGC into a single output to reduce uncertainty. The LLGC results has a confidence value ranging 0.0 to 1.0 representing probability of built-up and non-built-up. The median value of the confidence for a certain period around a target time was expected to be a robust output of confidence to identify built-up or non-built-up areas against uncertainties in satellite data quality, such as cloud and haze contamination. Four scenes of Landsat data for each target years, 1990, 2000, 2005, and 2010, were chosen among the Landsat archive data with cloud contamination less than 20%.We developed a system with the algorithms on the Data Integration and Analysis System (DIAS) in the University of Tokyo and processed 5200 scenes of Landsat data for cities with more than one million people worldwide.

  12. Structural design by CAD system

    International Nuclear Information System (INIS)

    CAD systems are now widely used for the design of many engineering problems involving static, dynamic and thermal stress analyses of structures. In order to apply CAD systems to the structural analysis and design, the function of hardwares and softwares necessary for the CAD systems must be understood. The purpose of this study is to introduce the basic elements that are indispensible in the application of CAD systems to the analysis and design of structures and to give a thorough understanding of CAD systems to design engineers, so as to participate in the further technological developments of CAD systems. Due to the complexity and variety of the shape and size of the nowa-days structures, the need of new design technologies is growing for more efficient, accurate and economical design of structures. The application of CAD systems to structural engineering fields enables to improve structural engineering analysis and design technologies and also to obtain the standardization of the design process. An active introduction of rapidly developing CAD technologies will contribute to analyzing and designing structures more efficiently and reliably. Based on this report of the current status of the application of CAD systems to the structural analysis and design, the next goal is to develop the expert system which enables to perform the design of structures by CAD systems from the preliminary conceptual design to the final detail drawings automatically. (Author)

  13. DESIGNING INFORMATION SYSTEM IN ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Joanna WALASEK

    2015-06-01

    Full Text Available This article is an attempt to approach essential issues in designing modern information systems. The key to successful information system is good design. A modern design requires looking from a number of different perspectives. Different people use different information in different contexts. These problems should be analyzed and requirements should be documented before solutions are designed and implemented. Satisfying the business needs is a baseline standard for information system.

  14. Computer System Design System-on-Chip

    CERN Document Server

    Flynn, Michael J

    2011-01-01

    The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

  15. Designing Instructional Systems

    Science.gov (United States)

    Furtado, Lorraine T.

    1974-01-01

    The author presents an instructional design model for teachers that evolves around a teacher-manager concept which recognizes management functions of: planning, organizing, leading, and controlling. (EA)

  16. ROLLING MILL SYSTEM DYNAMIC DESIGN

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It is studied how the aluminum foil chatter mark is produced and controlledThe stableness of hydraulic AGC system,fluid vibration of capsule system,and electromechanical coupling of AC/AC VVVF system and dec oupling are also studiedIt is shown that rolling mill design should go to syst em dynamic design from traditional designThe framed drawing of system dynamic design program is presented

  17. System Design for Telecommunication Gateways

    CERN Document Server

    Bachmutsky, Alexander

    2010-01-01

    System Design for Telecommunication Gateways provides a thorough review of designing telecommunication network equipment based on the latest hardware designs and software methods available on the market. Focusing on high-end efficient designs that challenge all aspects of the system architecture, this book helps readers to understand a broader view of the system design, analyze all its most critical components, and select the parts that best fit a particular application. In many cases new technology trends, potential future developments, system flexibility and capability extensions are outline

  18. "Permanent" records: experience with data migration in radiology information system and picture archiving and communication system replacement.

    Science.gov (United States)

    Behlen, F M; Sayre, R E; Weldy, J B; Michael, J S

    2000-05-01

    In the replacement of both a radiology information system (RIS) and a picture archiving and communication system (PACS) archive, data were migrated from the prior system to the new system. We report on the process, the time and resources required, and the fidelity of data transfer. We find that for two PACS archives, both organized according to the Digital Imaging and Communications in Medicine (DICOM) information model, data may be transferred with full fidelity, but the time required for transfer is significant. Transfer from off-line backup media was found to be faster than transfer from our robotic tape library. In contrast, the RIS replacement required extensive labor to translate prior data between dissimilar information models, and some data were inevitably lost in the translation. Standards for RIS information models are needed to promote the migration of data without loss of content.

  19. Using the Saliency-Based Model to Design a Digital Archaeological Game to Motivate Players' Intention to Visit the Digital Archives of Taiwan's Natural Science Museum

    Science.gov (United States)

    Hong, Jon-Chao; Hwang, Ming-Yueh; Chen, Yu-Ju; Lin, Pei-Hsin; Huang, Yao-Tien; Cheng, Hao-Yueh; Lee, Chih-Chin

    2013-01-01

    Museums in Taiwan have developed various digital archives, but few people have visited these digital archives. Therefore, this study designed a digital archaeology game for high school students to play. Based on the concept of "learning for playing" (i.e., players who want to win will study more), the digital archaeology game contest aims at…

  20. Insertion device vacuum system designs

    International Nuclear Information System (INIS)

    Synchrotron light source insertion device vacuum systems now in operation and systems proposed for the future are reviewed. An overview of insertion devices is given and four generic vacuum chamber designs, transition section design and pumping considerations are discussed. Examples of vacuum chamber systems are presented

  1. Acquisition, archiving, and analysis of Doublet III in diagnostic data on a distributed computer system

    International Nuclear Information System (INIS)

    Computer support of a tokamak fusion experiment for the purpose of data acquisition, analysis, and archiving required handling the large amounts of data generated each shot, and presenting the data for both individual diagnostic experiments and shot summary in a timely and useful manner. A distributed computer system with processing at three levels supports General Atomic's Doublet III tokamak by providing: (1) acquisition and permanent archiving of all diagnostic data, (2) analysis and control for each physics diagnostic, (3) overall shot summary after each shot, and (4) detailed analysis of current and post shot data

  2. Picture Archiving and Communication System (PACS) implementation, integration & benefits in an integrated health system.

    Science.gov (United States)

    Mansoori, Bahar; Erhard, Karen K; Sunshine, Jeffrey L

    2012-02-01

    The availability of the Picture Archiving and Communication System (PACS) has revolutionized the practice of radiology in the past two decades and has shown to eventually increase productivity in radiology and medicine. PACS implementation and integration may bring along numerous unexpected issues, particularly in a large-scale enterprise. To achieve a successful PACS implementation, identifying the critical success and failure factors is essential. This article provides an overview of the process of implementing and integrating PACS in a comprehensive health system comprising an academic core hospital and numerous community hospitals. Important issues are addressed, touching all stages from planning to operation and training. The impact of an enterprise-wide radiology information system and PACS at the academic medical center (four specialty hospitals), in six additional community hospitals, and in all associated outpatient clinics as well as the implications on the productivity and efficiency of the entire enterprise are presented. PMID:22212425

  3. Microwave systems design

    CERN Document Server

    Awang, Zaiki

    2014-01-01

    The aim of this book is to serve as a design reference for students and as an up-to-date reference for researchers. It also acts as an excellent introduction for newcomers to the field and offers established rf/microwave engineers a comprehensive refresher.  The content is roughly classified into two – the first two chapters provide the necessary fundamentals, while the last three chapters focus on design and applications. Chapter 2 covers detailed treatment of transmission lines. The Smith chart is utilized in this chapter as an important tool in the synthesis of matching networks for microwave amplifiers. Chapter 3 contains an exhaustive review of microstrip circuits, culled from various references. Chapter 4 offers practical design information on solid state amplifiers, while Chapter 5 contains topics on the design of modern planar filters, some of which were seldom published previously. A set of problems at the end of each chapter provides the readers with exercises which were compiled from actual uni...

  4. Design of combi systems

    DEFF Research Database (Denmark)

    Andersen, Elsa; Shah, Louise Jivan; Furbo, Simon

    2001-01-01

    in Denmark correspond to the system illustrated in Figure1. The control system operates the three-way valve in the solar collector circuit so solar heat is supplied either to the storage tank or to the heat exchanger between the collector loop and the space-heating loop. [Ellehauge K, ShahL.J. (2000...... system based on a tank in tank heat storage are investigated experimentally in a laboratory test facility. One of the units is based on a mantle tank the other is based on a tank with a built-in heat exchanger spiral. The thermal performances of the systems in the laboratory test facility are measured...

  5. Embedded Systems Design with FPGAs

    CERN Document Server

    Pnevmatikatos, Dionisios; Sklavos, Nicolas

    2013-01-01

    This book presents methodologies for modern applications of embedded systems design, using field programmable gate array (FPGA) devices.  Coverage includes state-of-the-art research from academia and industry on a wide range of topics, including advanced electronic design automation (EDA), novel system architectures, embedded processors, arithmetic, dynamic reconfiguration and applications. Describes a variety of methodologies for modern embedded systems design;  Implements methodologies presented on FPGAs; Covers a wide variety of applications for reconfigurable embedded systems, including Bioinformatics, Communications and networking, Application acceleration, Medical solutions, Experiments for high energy physics, Astronomy, Aerospace, Biologically inspired systems and Computational fluid dynamics (CFD).

  6. FINGERPRINT RECOGNITION SYSTEM DESIGN

    OpenAIRE

    SONMEZ, Öznur Sinem; OZTAS, Oguzhan

    2010-01-01

    In this study, a minutiae-based fingerprint recognition system is implemented which includes normalization, enhancement, thinning, extraction of minutiae, elimination of false minutiae, orientation estimation, core point detection, finding reference points and matching processes. Accordingly, the effects of enhancement and elimination of false minutiae processes, methods of reference point determination and low quality fingerprint images on system performance are analyzed using two different ...

  7. Mars oxygen production system design

    Science.gov (United States)

    Cotton, Charles E.; Pillow, Linda K.; Perkinson, Robert C.; Brownlie, R. P.; Chwalowski, P.; Carmona, M. F.; Coopersmith, J. P.; Goff, J. C.; Harvey, L. L.; Kovacs, L. A.

    1989-01-01

    The design and construction phase is summarized of the Mars oxygen demonstration project. The basic hardware required to produce oxygen from simulated Mars atmosphere was assembled and tested. Some design problems still remain with the sample collection and storage system. In addition, design and development of computer compatible data acquisition and control instrumentation is ongoing.

  8. Software-Design-Analyzer System

    Science.gov (United States)

    Tausworthe, Robert C.

    1991-01-01

    CRISP-90 software-design-analyzer system, update of CRISP-80, is set of computer programs constituting software tool for design and documentation of other software and supporting top-down, hierarchical, modular, structured methodologies for design and programming. Written in Microsoft QuickBasic.

  9. DCC Briefing Paper: Database archiving

    OpenAIRE

    Müller, Heiko

    2009-01-01

    In a computational context, data archiving refers to the storage of electronic documents, data sets, multimedia files, and so on, for a defined period of time. Database archiving is usually seen as a subset of data archiving. Database archiving focuses on archiving data that are maintained under the control of a database management system and structured under a database schema, e.g., a relational database. The primary goal of database archiving is to maintain access to data in case it is late...

  10. System Security Authorization Agreement (SSAA) for the WIRE Archive and Research Facility

    Science.gov (United States)

    2002-01-01

    The Wide-Field Infrared Explorer (WIRE) Archive and Research Facility (WARF) is operated and maintained by the Department of Physics, USAF Academy. The lab is located in Fairchild Hall, 2354 Fairchild Dr., Suite 2A103, USAF Academy, CO 80840. The WARF will be used for research and education in support of the NASA Wide Field Infrared Explorer (WIRE) satellite, and for related high-precision photometry missions and activities. The WARF will also contain the WIRE preliminary and final archives prior to their delivery to the National Space Science Data Center (NSSDC). The WARF consists of a suite of equipment purchased under several NASA grants in support of WIRE research. The core system consists of a Red Hat Linux workstation with twin 933 MHz PIII processors, 1 GB of RAM, 133 GB of hard disk space, and DAT and DLT tape drives. The WARF is also supported by several additional networked Linux workstations. Only one of these (an older 450 Mhz PIII computer running Red Hat Linux) is currently running, but the addition of several more is expected over the next year. In addition, a printer will soon be added. The WARF will serve as the primary research facility for the analysis and archiving of data from the WIRE satellite, together with limited quantities of other high-precision astronomical photometry data from both ground- and space-based facilities. However, the archive to be created here will not be the final archive; rather, the archive will be duplicated at the NSSDC and public access to the data will generally take place through that site.

  11. Designing Systems for Environmental Sustainability

    Science.gov (United States)

    Dr. Smith will describe his U.S. EPA research which involves elements of design, from systems as diverse as biofuel supply chains to recycling systems and chemical processes. Design uses models that rate performance as part of a synthesis approach, where steps of analysis and sy...

  12. Designing flexible procurement systems

    OpenAIRE

    Hughes, Will

    1990-01-01

    The systems used for the procurement of buildings are organizational systems. They involve people in a series of strategic decisions, and a pattern of roles, responsibilities and relationships that combine to form the organizational structure of the project. To ensure effectiveness of the building team, this organizational structure needs to be contingent upon the environment within which the construction project takes place. In addition, a changing environment means that the organizational s...

  13. The embedded systems design challenge

    OpenAIRE

    Henzinger, T. A.; Sifakis, J

    2006-01-01

    We summarize some current trends in embedded systems design and point out some of their characteristics, such as the chasm between analytical and computational models, and the gap between safety-critical and best-effort engineering practices. We call for a coherent scientific foundation for embedded systems design, and we discuss a few key demands on such a foundation: the need for encompassing several manifestations of heterogeneity, and the need for constructivity in design. We believe that...

  14. BIOME: A scientific data archive search-and-order system using browser-aware, dynamic pages

    Science.gov (United States)

    Jennings, S. V.; Yow, T. G.; Ng, V. W.

    1997-01-01

    The Oak Ridge National Laboratory's (ORNL) Distributed Active Archive Center (DAAC) is a data archive and distribution center for the National Air and Space Administration's (NASA) Earth Observing System Data and Information System (EOSDIS). Both the Earth Observing System (EOS) and EOSDIS are components of NASA's contribution to the US Global Change Research Program through its Mission to Planet Earth Program. The ORNL DAAC provides access to data used in ecological and environmental research such as global change, global warming, and terrestrial ecology. Because of its large and diverse data holdings, the challenge for the ORNL DAAC is to help users find data of interest from the hundreds of thousands of files available at the DAAC without overwhelming them. Therefore, the ORNL DAAC has developed the Biogeochemical Information Ordering Management Environment (BIOME), a customized search and order system for the World Wide Web (WWW). BIOME is a public system located at http://www-eosdis. ornl.gov/BIOME/biome.html.

  15. Systems design for remote healthcare

    CERN Document Server

    Bonfiglio, Silvio

    2014-01-01

    This book provides a multidisciplinary overview of the design and implementation of systems for remote patient monitoring and healthcare. Readers are guided step-by-step through the components of such a system and shown how they could be integrated in a coherent framework for deployment in practice. The authors explain planning from subsystem design to complete integration and deployment, given particular application constraints. Readers will benefit from descriptions of the clinical requirements underpinning the entire application scenario, physiological parameter sensing techniques, information processing approaches and overall, application dependent system integration. Each chapter ends with a discussion of practical design challenges and two case studies are included to provide practical examples and design methods for two remote healthcare systems with different needs. ·         Provides a multi-disciplinary overview of next-generation mobile healthcare system design; ·         Includes...

  16. Designing Deliberation Systems

    OpenAIRE

    Rose, Jeremy; Sæbø, Øystein

    2010-01-01

    In a liberal democracy, the evolution of political agendas and formation of policy involves deliberation: serious consideration of political issues.  Modern day political participation is dependent on widespread deliberation supported by information and communication technologies, which also offer the potential to revitalize and transform citizen engagement in democracy.  Although the majority of web 2.0 systems enable these discourses to some extent, government institutions commission and ma...

  17. Modular system design and evaluation

    CERN Document Server

    Levin, Mark Sh

    2015-01-01

    This book examines seven key combinatorial engineering frameworks (composite schemes consisting of algorithms and/or interactive procedures) for hierarchical modular (composite) systems. These frameworks are based on combinatorial optimization problems (e.g., knapsack problem, multiple choice problem, assignment problem, morphological clique problem), with the author’s version of morphological design approach – Hierarchical Morphological Multicritieria Design (HMMD) – providing a conceptual lens with which to elucidate the examples discussed. This approach is based on ordinal estimates of design alternatives for systems parts/components, however, the book also puts forward an original version of HMMD that is based on new interval multiset estimates for the design alternatives with special attention paid to the aggregation of modular solutions (system versions). The second part of ‘Modular System Design and Evaluation’ provides ten information technology case studies that enriches understanding of th...

  18. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  19. The Conquest Hospital picture archiving and communications system development, 1992 to 1999

    OpenAIRE

    Foord, Keith; Tomlinson, Nigel

    1999-01-01

    Conquest Hospital was a UK regional development site for a pre-Digital Imaging and Communications in Medicine (DICOM) picture archiving and communication system (PACS). The initial system was installed in mid 1992. Identification has been made of data transfer, ergonomic and single point of failure issues in the original PACS, which was called “iLAN.” This has informed respecification of a DICOM/HTML PACS, the first stages of which have been hospital renetworking and installation of new DICOM...

  20. Archiving and distributing earth-science data with the PANGAEA information system

    OpenAIRE

    Grobe, Hannes; Diepenbroek, Michael; Dittert, Nicolas; Reinke, Manfred; Sieger, Rainer

    2006-01-01

    The information system PANGAEA - Publishing Network for Geoscientific & Environmental Data (http://www.pangaea.de) is aimed at archiving, publishing, and distributing data related to climate variability, the marine environment, and the solid earth. The system is a public 'data library' distributing data to the scientific community through the Internet. Data are stored in a relational database in a consistent format with related meta-information following international standards. Data are geor...

  1. Expert Systems: Instructional Design Potential.

    Science.gov (United States)

    Pollock, Joellyn; Grabinger, R. Scott

    1989-01-01

    Description of the components of expert systems highlights their potential uses in the field of instructional design. Uses of expert systems are described for determining the cost-effectiveness of instructional media; as instructional management aids; as job aids; in helping to diagnose student problems; and as student feedback/evaluation systems.…

  2. NASA System Engineering Design Process

    Science.gov (United States)

    Roman, Jose

    2011-01-01

    This slide presentation reviews NASA's use of systems engineering for the complete life cycle of a project. Systems engineering is a methodical, disciplined approach for the design, realization, technical management, operations, and retirement of a system. Each phase of a NASA project is terminated with a Key decision point (KDP), which is supported by major reviews.

  3. System Design of the SWRL Financial System.

    Science.gov (United States)

    Ikeda, Masumi

    To produce various management and accounting reports in order to maintain control of SWRL (Southwest Regional Laboratory) operational and financial activities, a computer-based SWRL financial system was developed. The system design is outlined, and various types of system inputs described. The kinds of management and accounting reports generated…

  4. Designing modern furnace cooling systems

    Science.gov (United States)

    Merry, J.; Sarvinis, J.; Voermann, N.

    2000-02-01

    An integrated multidisciplinary approach to furnace design that considers the interdependence between furnace cooling elements and other furnace systems, such as binding, cooling water, and instrumentation, is necessary to achieve maximum furnace production and a long refractory life. The retrofit of the BHP Hartley electric furnace and the Kidd Creek copper converting furnace are successful examples of an integrated approach to furnace cooling design.

  5. Design of Knight LED system

    Science.gov (United States)

    Zheng, Wen; Lou, Yuna; Xiao, Zhihong

    2010-02-01

    This design introduces a used car on the design of LED decorative light strip. This LED named Knight LED. In This system we use ATMEGA8 as the Master MCU Chip. Through the microcontroller to implement the wireless remote control receiver and the LED lights of different modes of switching, different brightness control. Also we use ULN2803 as the LED driver.

  6. Digital systems design language. Design synthesis of digital systems

    Science.gov (United States)

    Shiva, S. G.

    1979-01-01

    The Digital Systems Design Language (DDL) is implemented on the SEL-32 computer systems. The details of the language, translator and simulator programs are included. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

  7. System design for distributed adaptive observation systems

    NARCIS (Netherlands)

    Ditzel, M.; Kester, L.J.H.M.; Broek, S.P. van den

    2011-01-01

    Currently, there is no clear-cut approach or design methodology available for designing distributed adaptive observation systems, partly due to the necessity to combine elements and approaches from several technological and scientific communities. Recently, an effort was made addressing this issue i

  8. BepiColombo Science Data Processing and Archiving System

    Science.gov (United States)

    Martinez, Santa; Ortiz de Landaluce, Inaki

    2015-12-01

    The approach selected for BepiColombo for the processing, analysis and archiving of the science data represents a significant change with respect to previous ESA planetary missions, and the Science Ground Segment (SGS), located at ESAC, will play a key role in these activities. This contribution will summarise the key features of the selected approach, and will describe its implementation, with focus on the following aspects: - The use of state-of-the-art virtualisation technology for automatic build, deployment and execution of the pipelines as independent application containers. This will allow specific software environments, and underlying hardware resources, to be isolated, scaled and accessed in a homogeneous fashion. - A set of core libraries under development at the SGS (e.g. telemetry decoding, PDS product generation/validation, conversion to engineering units, Java to SPICE binding, geometry computations) aimed to be reused for certain processing steps in different pipelines. The implementation follows a quite generic and modular architecture providing a high level of flexibility and adaptability, which will allow its re-usability by future ESA planetary missions.

  9. System design projects for undergraduate design education

    Science.gov (United States)

    Batill, S. M.; Pinkelman, J.

    1993-01-01

    Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

  10. Archiving the Relaxed Consistency Web

    OpenAIRE

    Xie, Zhiwu; Van de Sompel, Herbert; Liu, Jinyang; Van Reenen, Johann; Jordan, Ramiro

    2013-01-01

    The historical, cultural, and intellectual importance of archiving the web has been widely recognized. Today, all countries with high Internet penetration rate have established high-profile archiving initiatives to crawl and archive the fast-disappearing web content for long-term use. As web technologies evolve, established web archiving techniques face challenges. This paper focuses on the potential impact of the relaxed consistency web design on crawler driven web archiving. Relaxed consist...

  11. The ``One Archive'' for JWST

    Science.gov (United States)

    Greene, G.; Kyprianou, M.; Levay, K.; Sienkewicz, M.; Donaldson, T.; Dower, T.; Swam, M.; Bushouse, H.; Greenfield, P.; Kidwell, R.; Wolfe, D.; Gardner, L.; Nieto-Santisteban, M.; Swade, D.; McLean, B.; Abney, F.; Alexov, A.; Binegar, S.; Aloisi, A.; Slowinski, S.; Gousoulin, J.

    2015-09-01

    The next generation for the Space Telescope Science Institute data management system is gearing up to provide a suite of archive system services supporting the operation of the James Webb Space Telescope. We are now completing the initial stage of integration and testing for the preliminary ground system builds of the JWST Science Operations Center which includes multiple components of the Data Management Subsystem (DMS). The vision for astronomical science and research with the JWST archive introduces both solutions to formal mission requirements and innovation derived from our existing mission systems along with the collective shared experience of our global user community. We are building upon the success of the Hubble Space Telescope archive systems, standards developed by the International Virtual Observatory Alliance, and collaborations with our archive data center partners. In proceeding forward, the “one archive” architectural model presented here is designed to balance the objectives for this new and exciting mission. The STScI JWST archive will deliver high quality calibrated science data products, support multi-mission data discovery and analysis, and provide an infrastructure which supports bridges to highly valued community tools and services.

  12. PET/CT Fusion Viewing Software for Use with Picture Archiving and Communication Systems

    OpenAIRE

    Im, Ki Chun; Choi, Ik Soo; Ryu, Jin-Sook; Eo, Gi Seoung; Kim, Jae Seung; Moon, Dae Hyuk

    2009-01-01

    We developed positron emission tomography (PET)/computed tomography (CT) viewing software (PETviewer) that can display co-registered PET and CT images obtained by PET/CT and stored on picture archiving and communication systems (PACS). PETviewer has tools for presetting windows for CT display; control bars for PET window level; zoom, pan, and pseudo-color functions; and allows the user to draw a rectangular region of interest (ROI) for standardized uptake value (SUV) measurement. SUV was calc...

  13. Content-based image retrieval in picture archiving and communications systems

    OpenAIRE

    Qi, Hairong; Snyder, Wesley E.

    1999-01-01

    We propose the concept of content-based image retrieval (CBIR) and demonstrate its potential use in picture archival and communication system (PACS). We address the importance of image retrieval in PACS and highlight the drawbacks existing in traditional textual-based retrieval. We use a digital mammogram database as our testing data to illustrate the idea of CBIR, where retrieval is carried out based on object shape, size, and brightness histogram. With a user-supplied query image, the syste...

  14. An overview of the Scripps Satellite archive and Browse for Localized Environments (SSABLE) System

    Science.gov (United States)

    Simpson, James J.; Harkins, Daniel N.

    1993-08-01

    The Scripps Satellite Archive and Browse for Localized Environments (SSABLE) system is a network based system for the user-friendly archive, browse, order, and distribution of satellite data [e.g., NOAA Advanced Very High Resolution Radiometer (AVHRR), NIMBUS Coastal Zone Color Scanner (CZCS)]. SSABLE provides an easy to use, point-and-click mouse driven graphical interface developed around the Open Software Foundation's OSF/Motif Widget Set and the X Window network communication protocol. A relational database, accessed through SSABLE's Graphical User Interface (GUI), provides efficient and effective search capabilities to complex satellite databases. Unlike traditional satellite data browse systems, SSABLE does not require end users to invest in expensive dedicated-purpose hardware or software. Moreover, SSABLE is updated in near-real time; passes collected at the Scripps Satellite Oceanography Center (SSOC) in La Jolla, CA are available for global browsing within minutes of capture. SSABLE also provides a user-friendly mechanism for re-archiving historical satellite data. The device independence and performance of SSABLE have been verified at over 90 national and international test sites. Typical update response times in the U.S., Canada, and Australia are between 2-5 seconds; transmissions to Europe typically require 20-25 seconds. More information about the use of SSABLE is available through the email address; browse@oddie.ucsd.edu.

  15. Rnomads: An R Interface with the NOAA Operational Model Archive and Distribution System

    Science.gov (United States)

    Bowman, D. C.; Lees, J. M.

    2014-12-01

    The National Oceanic and Atmospheric Administration Operational Model Archive and Distribution System (NOMADS) facilitates rapid delivery of real time and archived environmental data sets from multiple agencies. These data are distributed free to the scientific community, industry, and the public. The rNOMADS package provides an interface between NOMADS and the R programming language. Like R itself, rNOMADS is open source and cross platform. It utilizes server-side functionality on the NOMADS system to subset model outputs for delivery to client R users. There are currently 57 real time and 10 archived models available through rNOMADS. Atmospheric models include the Global Forecast System and North American Mesoscale. Oceanic models include WAVEWATCH III and U. S. Navy Operational Global Ocean Model. rNOMADS has been downloaded 1700 times in the year since it was released. At the time of writing, it is being used for wind and solar power modeling, climate monitoring related to food security concerns, and storm surge/inundation calculations, among others. We introduce this new package and show how it can be used to extract data for infrasonic waveform modeling in the atmosphere.

  16. Flight Design System-1 System Design Document. Volume 9: Executive logic flow, program design language

    Science.gov (United States)

    1979-01-01

    The detailed logic flow for the Flight Design System Executive is presented. The system is designed to provide the hardware/software capability required for operational support of shuttle flight planning.

  17. Design of Enterprise Information Systems

    DEFF Research Database (Denmark)

    Riis, Jens Ove

    2011-01-01

    Abstract. As a scientific and professional discipline, the design of enterprise systems has undergone an impressive development. Today, it has achieved a well-established practice with clearly defined phases, tasks and methods. However, enterprises are challenged by increased complexity in their ......Abstract. As a scientific and professional discipline, the design of enterprise systems has undergone an impressive development. Today, it has achieved a well-established practice with clearly defined phases, tasks and methods. However, enterprises are challenged by increased complexity......-sustaining informal learning processes •Involving stakeholders – clarifying who wants to see the design succeed •Accepting diversity – working with several perspectives in parallel •Experimenting with new ideas - establishing a playful and creative mood among participants •Enacting key features of new systems design...... – involving users in testing a series of prototypes •Including the organizational context – orchestrating a design effort in view of simultaneous development initiatives and top management’s shifting agenda •Acknowledging that the intentions of an enterprise information system are realized through people...

  18. Computer-aided system design

    Science.gov (United States)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  19. OASIS: A Data Fusion System Optimized for Access to Distributed Archives

    Science.gov (United States)

    Berriman, G. B.; Kong, M.; Good, J. C.

    2002-05-01

    The On-Line Archive Science Information Services (OASIS) is accessible as a java applet through the NASA/IPAC Infrared Science Archive home page. It uses Geographical Information System (GIS) technology to provide data fusion and interaction services for astronomers. These services include the ability to process and display arbitrarily large image files, and user-controlled contouring, overlay regeneration and multi-table/image interactions. OASIS has been optimized for access to distributed archives and data sets. Its second release (June 2002) provides a mechanism that enables access to OASIS from "third-party" services and data providers. That is, any data provider who creates a query form to an archive containing a collection of data (images, catalogs, spectra) can direct the result files from the query into OASIS. Similarly, data providers who serve links to datasets or remote services on a web page can access all of these data with one instance of OASIS. In this was any data or service provider is given access to the full suite of capabilites of OASIS. We illustrate the "third-party" access feature with two examples: queries to the high-energy image datasets accessible from GSFC SkyView, and links to data that are returned from a target-based query to the NASA Extragalactic Database (NED). The second release of OASIS also includes a file-transfer manager that reports the status of multiple data downloads from remote sources to the client machine. It is a prototype for a request management system that will ultimately control and manage compute-intensive jobs submitted through OASIS to computing grids, such as request for large scale image mosaics and bulk statistical analysis.

  20. Picture archiving and communication systems in radiology. Sistemas de archivo y comunicacion de imagen en radiologia

    Energy Technology Data Exchange (ETDEWEB)

    Piqueras Pardellans, J.; Carreo Pedemonte, J.C.; Lucaya Layret, J.

    1994-01-01

    Picture archiving and communication systems (PACS) constitute a data processing tool that offers new working methods of diagnostic radiology. The definitive aim of a PACS is to allow a radiology service to operate without film images or documents on paper, integrating images and clinical information. Different image acquisition, viewing and storage systems, linked by communications networks, are arranged around a central management and storage system. Their components are described and the advantages, drawbacks and limitations are discussed from the technological point of view and considering their impact on health care, while a critical review is provided of the 1993 status of this issue. (Author)

  1. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  2. Business System Planning Project, Preliminary System Design

    International Nuclear Information System (INIS)

    CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time

  3. Mission critical operation archiving system using a database for synchrotron radiation beam lines at the Photon Factory

    International Nuclear Information System (INIS)

    The mission critical operation archiving system has been designed and built using the Oracle database for the twenty-two synchrotron radiation beam lines at the 2.5 GeV positron storage ring at the Photon Factory, where X-ray/VUV synchrotron radiation experiments are simultaneously carried out. When any one of beam lines is malfunctioning, neither injecting the 2.5 GeV beam into the storage ring nor operation of the ring is allowed due to the radiation safety reason. The system is designed for critical operation of the synchrotron radiation beam lines to provide a quick recovery from a failure, allowing a long term operation. The system has real-time capability to automatically store the database with all possible operational events of all vacuum valves/shutters and safety interlock signals, and all static operational data, including the pressures of the beam lines and the storage ring, and related operational data which represent the physical behaviors of the beam lines. By retrieving any combination of operational data, the system allows to reproduce the physical behaviors that have occurred in the beam lines. The total number of items to be inspected by the system is over 40 million in order to obtain a correlation between the faulty component and other physical components that suggests the cause of the failure. With the aid of the system, the operator at the control room can easily determine the faulty component, and recover the accelerator component. (author)

  4. Blindness in designing intelligent systems

    Science.gov (United States)

    Denning, Peter J.

    1988-01-01

    New investigations of the foundations of artificial intelligence are challenging the hypothesis that problem solving is the cornerstone of intelligence. New distinctions among three domains of concern for humans--description, action, and commitment--have revealed that the design process for programmable machines, such as expert systems, is based on descriptions of actions and induces blindness to nonanalytic action and commitment. Design processes focusing in the domain of description are likely to yield programs like burearcracies: rigid, obtuse, impersonal, and unable to adapt to changing circumstances. Systems that learn from their past actions, and systems that organize information for interpretation by human experts, are more likely to be successful in areas where expert systems have failed.

  5. Requirements analysis and system design

    CERN Document Server

    Maciaszek, Leszek A

    2007-01-01

    An examination of the methods and techniques used in the analysis and design phases of Information System development. Emphasis is placed upon the application of object technology in enterprise information systems (EIS) with UML being used throughout. Through its excellent balance of practical explanation and theoretical insight the book manages to avoid unnecessary, complicating details without sacrificing rigor. Examples of real-world scenarios are used throughout, giving the reader an understanding of what really goes on within the field of Software Engineering.

  6. System of automated map design

    International Nuclear Information System (INIS)

    Preprint 'System of automated map design' contains information about the program shell for construction of territory map, performing level line drawing of arbitrary two-dimension field (in particular, the radionuclide concentration field). The work schedule and data structures are supplied, as well as data on system performance. The preprint can become useful for experts in radioecology and for all persons involved in territory pollution mapping or multi-purpose geochemical mapping. (author)

  7. MODIS Information, Data, and Control System (MIDACS) system specifications and conceptual design

    Science.gov (United States)

    Han, D.; Salomonson, V.; Ormsby, J.; Ardanuy, P.; Mckay, A.; Hoyt, D.; Jaffin, S.; Vallette, B.; Sharts, B.; Folta, D.

    1988-01-01

    The MODIS Information, Data, and Control System (MIDACS) Specifications and Conceptual Design Document discusses system level requirements, the overall operating environment in which requirements must be met, and a breakdown of MIDACS into component subsystems, which include the Instrument Support Terminal, the Instrument Control Center, the Team Member Computing Facility, the Central Data Handling Facility, and the Data Archive and Distribution System. The specifications include sizing estimates for the processing and storage capacities of each data system element, as well as traffic analyses of data flows between the elements internally, and also externally across the data system interfaces. The specifications for the data system, as well as for the individual planning and scheduling, control and monitoring, data acquisition and processing, calibration and validation, and data archive and distribution components, do not yet fully specify the data system in the complete manner needed to achieve the scientific objectives of the MODIS instruments and science teams. The teams have not yet been formed; however, it was possible to develop the specifications and conceptual design based on the present concept of EosDIS, the Level-1 and Level-2 Functional Requirements Documents, the Operations Concept, and through interviews and meetings with key members of the scientific community.

  8. Thresholds for Discovery: EAD Tag Analysis in ArchiveGrid, and Implications for Discovery Systems

    Directory of Open Access Journals (Sweden)

    M. Proffitt

    2013-10-01

    Full Text Available The ArchiveGrid discovery system is made up in part of an aggregation of EAD (Encoded Archival Description encoded finding aids from hundreds of contributing institutions. In creating the ArchiveGrid discovery interface, the OCLC Research project team has long wrestled with what we can reasonably do with the large (120,000+ corpus of EAD documents. This paper presents an analysis of the EAD documents (the largest analysis of EAD documents to date. The analysis is paired with an evaluation of how well the documents support various aspects of online discovery. The paper also establishes a framework for thresholds of completeness and consistency to evaluate the results. We find that, while the EAD standard and encoding practices have not offered support for all aspects of online discovery, especially in a large and heterogeneous aggregation of EAD documents, current trends suggest that the evolution of the EAD standard and the shift from retrospective conversion to new shared tools for improved encoding hold real promise for the future.

  9. The impact of a picture archiving and communication system (PACS) upon an intensive care unit

    International Nuclear Information System (INIS)

    Objective: The aim of the study was to assess the effect of the introduction of PACS (Picture Archiving and Communication System) upon image availability in an Intensive Care Unit (ICU) and the consequent impact upon the behaviour of the ICU physicians, in terms of the initiation of image-based clinical actions. Design: A before and after study was used to compare the speed of image availability prior to, and following, the implementation of a hospital-wide PACS. Setting: The research was part of an economic evaluation of PACS at Hammersmith Hospital, West London. Patients and participants: All ICU patients who were X-rayed during two pre-PACS and one post-PACS data collection periods were included within the study. Measurements: The times of: the X-ray request; acquisition; availability on ICU; and of any image-based clinical action taken by the ICU physician were recorded by radiographers and ICU physicians. Results: PACS significantly reduced the time between request and image availability on ICU for routine X-rays but did not have any measurable impact upon the time clinical actions were initiated by ICU physicians. The data on non-routine images were statistically inconclusive. Conclusions: This study shows that PACS significantly improves the speed of delivery of routine images to the ICU, but it appears that the instigation of image-based clinical actions is determined by other organisational factors in ICU, such as ward rounds, rather than the availability of the image for viewing. Further work is required on non-routine X-rays to clarify the impact of PACS on physician behaviour in clinically urgent situations

  10. Archiving in the networked world

    OpenAIRE

    Seadle, Michael

    2011-01-01

    Purpose – The purpose of this paper is to investigate how extensively LOCKSS/CLOCKSS, Portico, and e-Depot provide long-term digital archiving for the journals listed in the Directory of Open Access Journals (DOAJ). Design/methodology/approach – The paper uses publicly available online data, which are processed in a set of PERL programs to measure the number of DOAJ articles in the three archiving systems. Findings – The findings show that only 8 per cent of the DOAJ titles are in LOCKS...

  11. Informational systems designing and implementation

    Directory of Open Access Journals (Sweden)

    M. Radic

    2006-08-01

    Full Text Available Purpose: Problems which are likely manifest themselves in the course of implementation cannot be envisagedat the design stage of an informational system without employing the approach presented in this paper.Design/methodology/approach: All the procedures as well as all the processes need to be located throughapplication of both analysis and synthesis; a through dismembering to the most plain constituent element to bemade followed by reintegration the same into a whole of mutually connected elements. The quest of a methodproviding for optimum results is solved theoretically as well as practically, given that any problem which mayappear in the course of implementation of the system had been resolved through analytic approach at the verystart of the design stage. Such approach provides for the only viable manner for an applied informational systemto be optimally utilized at minimum costs.Findings: This has been reconfirmed and proven by research monitoring and analysis of a number ofinformational systems applied in various organizations from shipyards, oil/petrochemical plants, steel mills etc.,and way further to nonindustrial organizations, such as hospitals.Research limitations/implications: Analytical/synthetical approach led to a conclusion that all stages of designand development of an informational system are of equal importance, so each and everyone of them must begiven equally careful consideration.Practical implications: By employment of data flow model all complex processes have been solved, all basicelements having been featured on the model with the logically required mutual connections. Linkage and basicelements flow sequence represents the basic for successful problems resolve in any informational system.Originality/value: This scientific, engineering approach to problems solving in the system operational useprovides for applicability in most various cases, such as where design, development, implementation of aninformational system

  12. Automating software design system DESTA

    Science.gov (United States)

    Lovitsky, Vladimir A.; Pearce, Patricia D.

    1992-01-01

    'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer.

  13. Photovoltaics system design and practice

    CERN Document Server

    Häberlin, Heinrich

    2012-01-01

    With the explosive growth in PV (photovoltaic) installations globally, the sector continues to benefit from important improvements in manufacturing technology and the increasing efficiency of solar cells. this timely handbook brings together all the latest design, layout and construction methods for entire PV plants in a single volume. Coverage includes procedures for the design of both stand-alone and grid-connected systems as well as practical guidance on typical operational scenarios and problems encountered for optimum PV plant performance. Key features:

    • Design of semiconductor QCA systems

      CERN Document Server

      Liu, Weiqiang; O'Neill, Maire

      2013-01-01

      Integrated circuits have become smaller, cheaper, and more reliable and certainly have revolutionized the world of electronics. Integrated circuits are used in almost all electronic devices and systems, many of which, such as the Internet, computers, and mobile phones, have become essential parts of modern life and have changed the way we live. Quantum-dot cellular automata (QCA) provides a revolutionary approach to computing with device-to-device interactions. The design of a QCA circuit is radically different from a conventional digital design due to its unique characteristics at both the ph

    • ARGOS laser system mechanical design

      Science.gov (United States)

      Deysenroth, M.; Honsberg, M.; Gemperlein, H.; Ziegleder, J.; Raab, W.; Rabien, S.; Barl, L.; Gässler, W.; Borelli, J. L.

      2014-07-01

      ARGOS, a multi-star adaptive optics system is designed for the wide-field imager and multi-object spectrograph LUCI on the LBT (Large Binocular Telescope). Based on Rayleigh scattering the laser constellation images 3 artificial stars (at 532 nm) per each of the 2 eyes of the LBT, focused at a height of 12 km (Ground Layer Adaptive Optics). The stars are nominally positioned on a circle 2' in radius, but each star can be moved by up to 0.5' in any direction. For all of these needs are following main subsystems necessary: 1. A laser system with its 3 Lasers (Nd:YAG ~18W each) for delivering strong collimated light as for LGS indispensable. 2. The Launch system to project 3 beams per main mirror as a 40 cm telescope to the sky. 3. The Wave Front Sensor with a dichroic mirror. 4. The dichroic mirror unit to grab and interpret the data. 5. A Calibration Unit to adjust the system independently also during day time. 6. Racks + platforms for the WFS units. 7. Platforms and ladders for a secure access. This paper should mainly demonstrate how the ARGOS Laser System is configured and designed to support all other systems.

    • Reporting an Experience on Design and Implementation of e-Health Systems on Azure Cloud

      OpenAIRE

      Lu, Shilin; Ranjan, Rajiv; Strazdins, Peter

      2013-01-01

      Electronic Health (e-Health) technology has brought the world with significant transformation from traditional paper-based medical practice to Information and Communication Technologies (ICT)-based systems for automatic management (storage, processing, and archiving) of information. Traditionally e-Health systems have been designed to operate within stovepipes on dedicated networks, physical computers, and locally managed software platforms that make it susceptible to many serious limitations...

    • Data Archive Project

      OpenAIRE

      Kemppainen, Timo-Pekka

      2015-01-01

      In the modern world, digital data archiving and accessing is an issue that needs tailored solutions. This thesis gives one example of designing and implementing a data archiving solution using time tested technologies. Helsinki Metropolia University of Applied Sciences had a need to archive their contracts in digital format instead of using old file cabinets. Specifications were created together with the customer at the start of the project. The project was to produce a complete product fo...

    • Measurement systems: application and design

      International Nuclear Information System (INIS)

      This book discusses a comprehensive coverage of most measurement systems that are used in practice. It is not only useful for a student, but also for a practicing engineer. With the advent of computers, their interface with sensors has become very important, which has been emphasized throughout. With the computer interface, it is now possible to use sensors outside the flat response region and in addition, feedback systems can be easily integrated into a measurement system. These advantages give enormous opportunity for designing new measurement systems-both hardware and software. Authors also discuss radiation-type temperature sensors operate with electromagnetic radiation whose wavelengths lie in the visible and infrared portions of the spectrum

    • Research on Garment Pattern Intelligent Design System

      Institute of Scientific and Technical Information of China (English)

      刘雁; 刘晓刚; 耿兆丰

      2003-01-01

      This article discusses the disadvantages of current computer aided garment design system first, and then brings forward the frame of intelligent garment design system. Based on the analysis of the structure of the intelligent system, it is pointed out that the intelligent pattern design system is the most important module of the whole system. The use of an expert system to realize the intelligent pattern design system is then proposed and the key technique of the system is discussed at last.

    • 基于C/S与B/S混合结构的海洋科技档案管理系统的分析和设计%Analysis and Design of Hybrid C/S and B/S Structure-based Marine Science and Technology Archives Management System

      Institute of Scientific and Technical Information of China (English)

      崔爱菊; 卢铭; 梁运萍

      2005-01-01

      分析了目前海洋科技档案管理的现状和存在的问题,针对海洋科技档案管理的特点和具体的应用需求,提出了基于C/S与B/S混合结构的海洋科技档案管理系统(Marine Science & Technology Archives Management System, MSTAMS)设计方案.基于海洋科技档案管理的工作流程,从系统的总体设计、数据库设计、功能模块划分以及安全管理体系等方面进行了论述,对其中的

  1. Archiving tools for EOS

    Science.gov (United States)

    Sindrilaru, Elvin-Alin; Peters, Andreas-Joachim; Duellmann, Dirk

    2015-12-01

    Archiving data to tape is a critical operation for any storage system, especially for the EOS system at CERN which holds production data for all major LHC experiments. Each collaboration has an allocated quota it can use at any given time therefore, a mechanism for archiving "stale" data is needed so that storage space is reclaimed for online analysis operations. The archiving tool that we propose for EOS aims to provide a robust client interface for moving data between EOS and CASTOR (tape backed storage system) while enforcing best practices when it comes to data integrity and verification. All data transfers are done using a third-party copy mechanism which ensures point-to- point communication between the source and destination, thus providing maximum aggregate throughput. Using ZMQ message-passing paradigm and a process-based approach enabled us to achieve optimal utilisation of the resources and a stateless architecture which can easily be tuned during operation. The modular design and the implementation done in a high-level language like Python, has enabled us to easily extended the code base to address new demands like offering full and incremental backup capabilities.

  2. ESA Science Archives and associated VO activities

    Science.gov (United States)

    Arviset, Christophe; Baines, Deborah; Barbarisi, Isa; Castellanos, Javier; Cheek, Neil; Costa, Hugo; Fajersztejn, Nicolas; Gonzalez, Juan; Fernandez, Monica; Laruelo, Andrea; Leon, Ignacio; Ortiz, Inaki; Osuna, Pedro; Salgado, Jesus; Tapiador, Daniel

    ESA's European Space Astronomy Centre (ESAC), near Madrid, Spain, hosts most of ESA space based missions' scientific archives, in planetary (Mars Express, Venus Express, Rosetta, Huygens, Giotto, Smart-1, all in ESA Planetary Science Archive), in astronomy (XMM-Newton, Herschel, ISO, Integral, Exosat, Planck) and in solar physics (Soho). All these science archives are operated by a dedicated Science Archives and Virtual Observatory Team (SAT) at ESAC, enabling common and efficient design, development, operations and maintenance of the archives software systems. This also ensures long term preservation and availability of such science archives, as a sustainable service to the science community. ESA space science data can be accessed through powerful and user friendly user interface, as well as from machine scriptable interface and through VO interfaces. Virtual Observatory activities are also fully part of ESA archiving strategy and ESA is a very ac-tive partner in VO initiatives in Europe through Euro-VO AIDA and EuroPlanet and worldwide through the IVOA (International Virtual Observatory Alliance) and the IPDA (International Planetary Data Alliance).

  3. The engineering design of the Tua rail track : evidence from the archives

    OpenAIRE

    Martins, Lurdes; Vasconcelos, Graça; Lourenço, Paulo B.; Beira, Eduardo

    2012-01-01

    This paper intends to give a detailed overview of the different phases of the Tua line focused on the changes in the longitudinal and transversal outline and on the definition of the project of special structures (tunnels, bridges, aqueducts and stone walls). For this, a detailed investigation was carried on the archives of REFER, the company in charge of the management of the infrastructure of the national Portuguese railways. The Tua line fit the Nacional railways plan, defin...

  4. Design of VUV monochromator systems

    International Nuclear Information System (INIS)

    The design of the grating instruments for use with a large light source, such as an electron storage ring, tokamak and others, is discussed. An analytical expression of spot diagrams is a powerful tool in the design of spectroscopic instruments, but it loses power when the number of optical elements increases. This difficulty can be overcome by tracing ray through the whole optical trains. Ray tracing formulas are introduced to make the analytical representation of spot diagrams. The design of a monochromator is to determine the optimum mounting parameters for a given type of grating and a given scanning mode or to determine the optimum values of both the mounting and the ruling parameters under given conditions. A merit function to determine the parameters was defined and analyzed. The parameters can be determined by minimizing the merit function. For the design of a simple system consisting of two concave mirrors or a concave mirror and a concave grating, the analytical expression for the conditions of focussing and coma elimination is useful. In the region of wavelength smaller than 50 nm, any grating presently available has a diminishingly small reflectance at normal incidence, while such gratings lose much of their high resolution capability when used at grazing incidence to gain high reflectance. To overcome this difficulty, it will be necessary to devise new methods which will simultaneously accomplish both high resolution and reasonably high reflectance. (Kato, T.)

  5. A project plan for construction and cabling of picture archiving and communication system network

    Institute of Scientific and Technical Information of China (English)

    罗敏; 王小林; 罗松; 雷文勇; 王学健; 温洪宇; 吴红星

    2003-01-01

    Objective To determine a network solution to meet the network requirements of the heavy data flow, load balance, and potential network storms from expansion of picture archiving and communication system (PACS) application.Methods Intel Netstructure 480T Giga Switch was used as the main switch and connected to each building by fiber channel at 1 Giga speed to archive 100 MB/s to each port. At the same time, the in-dependence of the original network construction was physically kept. The layer 3 and 4 switchers were used as load balance to reduce the heavy load of the network, and all the cabling for PACS used the super CAT5 along with the Intel NetStructure 1520 to prepare for potential network storms.Results An advanced intranet was set up to fully meet the high standard requirement of the PACS. The foundation for upgrading the whole network system to 1 Giga application was built to achieve sharing and transmission of images, information, and patient data within the hospital. The base was established for the standardized management of the hospital.Conclusion Good planning is the first step in setting up PACS, and the equipment from the necessary platform to run PACS and all kinds of hospital information system (HIS). The networking construction is the foundation of e-hospital.

  6. The Conquest Hospital picture archiving and communications system development, 1992 to 1999.

    Science.gov (United States)

    Foord, K; Tomlinson, N

    1999-05-01

    Conquest Hospital was a UK regional development site for a pre-Digital Imaging and Communications in Medicine (DICOM) picture archiving and communication system (PACS). The initial system was installed in mid 1992. Identification has been made of data transfer, ergonomic and single point of failure issues in the original PACS, which was called "iLAN." This has informed respecification of a DICOM/HTML PACS, the first stages of which have been hospital renetworking and installation of new DICOM 3.0 computed radiography/fluorography and computed tomography/magnetic resonance imaging segments. Final PACS elements are at contract stage. Plans are being completed for linkage of PACS to a clinical information system to create a comprehensive electronic patient record system. PMID:10342218

  7. Prototype solar-heating system design package

    Science.gov (United States)

    1979-01-01

    Design package for complete residential solar-heating system is given. Includes documents and drawings describing performance design, verification standards, and analysis of system with sufficient information to assemble working system.

  8. Financial innovation and system design

    Directory of Open Access Journals (Sweden)

    Mario Tonveronachi

    2010-01-01

    Full Text Available The official regulatory responses to the current crisis do not alter the laissez faire approach to the production and allocation of financial risks which characterises the existing regulatory framework. The stated goal remains that of maintaining the freedom for the private sector to introduce financial innovations, whose nature is consistent with the system design pursued by the official authorities. I argue that adopting a systemic perspective the crucial point is not just the nature of innovations but their quantitative dimension and dynamics, which are responsible for the endogenous creation of financial fragility. The new official proposals do not appear capable of changing this picture. A radical revision of the regulatory approach is necessary, of which an outline is presented.

  9. DDL:Digital systems design language

    Science.gov (United States)

    Shival, S. G.

    1980-01-01

    Hardware description languages are valuable tools in such applications as hardware design, system documentation, and logic design training. DDL is convenient medium for inputting design details into hardware-design automation system. It is suitable for describing digital systems at gate, register transfer, and major combinational block level.

  10. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management

  11. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process

  12. The Moon: An Archive of Small Body Migration in the Solar System

    Science.gov (United States)

    Joy, Katherine H.; Crawford, Ian A.; Curran, Natalie M.; Zolensky, Michael; Fagan, Amy F.; Kring, David A.

    2016-10-01

    The Moon is an archive of impact cratering in the Solar System throughout the past 4.5 billion years. It preserves this record better than larger, more complex planets like the Earth, Mars and Venus, which have largely lost their ancient crusts through geological reprocessing and hydrospheric/atmospheric weathering. Identifying the parent bodies of impactors (i.e. asteroid bodies, comets from the Kuiper belt or the Oort Cloud) provides geochemical and chronological constraints for models of Solar System dynamics, helping to better inform our wider understanding of the evolution of the Solar System and the transfer of small bodies between planets. In this review article, we discuss the evidence for populations of impactors delivered to the Moon at different times in the past. We also propose approaches to the identification and characterisation of meteoritic material on the Moon in the context of future lunar exploration efforts.

  13. Fermilab Recycler Collimation System Design

    Energy Technology Data Exchange (ETDEWEB)

    Brown, B. C. [Fermilab; Adamson, P. [Fermilab; Ainsworth, R. [Fermilab; Capista, D. [Fermilab; Hazelwood, K. [Fermilab; Kourbanis, I. [Fermilab; Mokhov, N. V. [Fermilab; Morris, D. K. [Fermilab; Murphy, M. [Fermilab; Sidorov, V. [Fermilab; Stern, E. [Fermilab; Tropin, I. [Fermilab; Yang, M-J. [Fermilab

    2016-10-04

    To provide 700 kW proton beams for neutrino production in the NuMI facility, we employ slip stacking in the Recycler with transfer to the Main Injector for recapture and acceleration. Slip stacking with 12 Booster batches per 1.33 sec cycle of the Main Injector has been implemented and briefly tested while extensive operation with 8 batches and 10 batches per MI cycle has been demonstrated. Operation in this mode since 2013 shows that loss localization is an essential component for long term operation. Beam loss in the Recycler will be localized in a collimation region with design capability for absorbing up to 2 kW of lost protons in a pair of 20-Ton collimators (absorbers). This system will employ a two stage collimation with a thin molybdenum scattering foil to define the bottom edge of both the injected and decelerated-for-slipping beams. Optimization and engineering design of the collimator components and radiation shielding are based on comprehensive MARS15 simulations predicting high collimation efficiency as well as tolerable levels of prompt and residual radiation. The system installation during the Fermilab 2016 facility shutdown will permit commissioning in the subsequent operating period.

  14. Isomer Energy System Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, D

    2003-09-01

    Isomer energy supplies offer the potential to increase the output power over time to accommodate varying power needs. Other materials with similar energy density (for example isotopic energy sources such as {sup 238}Pu) do not offer the potential to increase power with time. Often the design life of an energy source is significant when compared to the half-life of the isotope. As a result, the conventional isotopic energy supplies operate with significant excess power at start of life to meet the power needs at end-of-life. For example a {sup 238}Pu radioisotope energy supply with a 35-year design life must account for radioactive decay losses of about 25% of the plutonium present at the start of life. This decay loss is significant if the required output power from the device is constant with time. If the required power output from the device increases with time (such as some space applications), significant increases in power supply weight are required to meet design power requirements. Isomer energy supplies offer the potential to increase the output power over time to meet varying power needs, thereby offering a significant advantage over conventional systems. Isomer energy supplies also offer the possibility of being ''turned on'' based on need at a specific time. These characteristics offer distinct advantages to isomer energy supplies. This report examines the basic engineering characteristics of a hypothetical isomer energy supply in order to gain insight into properties of isomers that will make them potentially useful as energy sources in engineered systems. These isomer properties provide a basis for identification of candidate isomers and provide a basis for an isomer search.

  15. Spiral and vestibular ganglion estimates in archival temporal bones obtained by design based stereology and Abercrombie methods.

    Science.gov (United States)

    Ishiyama, Gail; Geiger, Christopher; Lopez, Ivan A; Ishiyama, Akira

    2011-03-15

    The objective of this study was to make direct comparisons of the estimates of spiral and vestibular neuronal number in human archival temporal bone specimens using design-based stereology with those using the assumption-based Abercrombie method. Archival human temporal bone specimens from subjects ranging in age from 16 to 80 years old were used. The number of spiral and vestibular ganglia neurons within the counting areas was estimated using the stereology-optical disector technique and compared with estimates obtained using the assumption-based Abercrombie method on the same specimens. Using the optical disector method, there was an average of 41,480 (coefficient of variation=0.12) spiral ganglia neurons and 28,930 (coefficient of variation=0.15) vestibular ganglia neurons. The mean coefficient of error was 0.076 for the spiral ganglion estimates, and 0.091 for the vestibular ganglion estimates. Using the Abercrombie correction method of two-dimensional analysis, an average of 23,110 (coefficient of variation of 0.08) spiral ganglia neurons, and 16,225 vestibular ganglia neurons (coefficient of variation of 0.15) was obtained. We found that there was a large disparity between the estimates with a significant 44% underestimation of the spiral and vestibular ganglion counts obtained using the Abercrombie method when compared with estimates using the optical disector method.

  16. Exploring teacher's instructional design practices from a systems design perspective

    NARCIS (Netherlands)

    Hoogveld, Bert; Paas, Fred; Jochems, Wim; Van Merriënboer, Jeroen

    2010-01-01

    Hoogveld, A. W. M., Paas, F., Jochems, W. M. G., & Van Merriënboer, J. J. G. (2002). Exploring teacher's instructional design practices from a systems design perspective. Instructionals Science, 30, 291-305.

  17. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+TM Standard Design

  18. CALIPSO Borehole Instrumentation Project at Soufriere Hills Volcano, Montserrat, BWI: Data Acquisition, Telemetry, Integration, and Archival Systems

    Science.gov (United States)

    Mattioli, G. S.; Linde, A. T.; Sacks, I. S.; Malin, P. E.; Shalev, E.; Elsworth, D.; Hidayat, D.; Voight, B.; Young, S. R.; Dunkley, P. N.; Herd, R.; Norton, G.

    2003-12-01

    The CALIPSO Project (Caribbean Andesite Lava Island-volcano Precision Seismo-geodetic Observatory) has greatly enhanced the monitoring and scientific infrastructure at the Soufriere Hills Volcano, Montserrat with the recent installation of an integrated array of borehole and surface geophysical instrumentation at four sites. Each site was designed to be sufficiently hardened to withstand extreme meteorological events (e.g. hurricanes) and only require minimum routine maintenance over an expected observatory lifespan of >30 y. The sensor package at each site includes: a single-component, very broad band, Sacks-Evertson strainmeter, a three-component seismometer ( ˜Hz to 1 kHz), a Pinnacle Technologies series 5000 tiltmeter, and a surface Ashtech u-Z CGPS station with choke ring antenna, SCIGN mount and radome. This instrument package is similar to that envisioned by the Plate Boundary Observatory for deployment on EarthScope target volcanoes in western North America and thus the CALIPSO Project may be considered a prototype PBO installation with real field testing on a very active and dangerous volcano. Borehole sites were installed in series and data acquisition began immediately after the sensors were grouted into position at 200 m depth, with the first completed at Trants (5.8 km from dome) in 12-02, then Air Studios (5.2 km), Geralds (9.4 km), and Olveston (7.0 km) in 3-03. Analog data from the strainmeter (50 Hz sync) and seismometer (200 Hz) were initially digitized and locally archived using RefTek 72A-07 data acquisition systems (DAS) on loan from the PASSCAL instrument pool. Data were downloaded manually to a laptop approximately every month from initial installation until August 2003, when new systems were installed. Approximately 0.2 Tb of raw data in SEGY format have already been acquired and are currently archived at UARK for analysis by the CALIPSO science team. The July 12th dome collapse and vulcanian explosion events were recorded at 3 of the 4

  19. Design and components of photovoltaic systems

    NARCIS (Netherlands)

    Sark, W.G.J.H.M. van

    2012-01-01

    This chapter provides an overview of the various aspects of photovoltaic (PV) system components and design. The basic performance of cells, modules, and inverters and how this is used in PV system design is described. Two case studies illustrating PV system design are presented: a hybrid system on t

  20. Electronic teaching files: seven-year experience using a commercial picture archiving and communication system.

    Science.gov (United States)

    Siegel, E; Reiner, B

    2001-06-01

    With the advent of electronic imaging and the internet, the ability to create, search, access, and archive digital imaging teaching files has dramatically improved. Despite the fact that a picture archival and communication system (PACS) has the potential to greatly simplify the creation of, archival, and access to a department or multifacility teaching file, this potential has not yet been satisfactorily realized in our own and most other PACS installations. Several limitations of the teaching file tools within our PACS have become apparent over time. These have, at our facility, resulted in a substantially reduced role of the teaching file tools for conferences, daily teaching, and research purposes. With the PACS at our institution, academic folders can only be created by the systems engineer, which often serves as an impediment to the teaching process. Once these folders are created, multiple steps are required to identify the appropriate folders, and subsequently save images. Difficulties exist for those attempting to search for the teaching file images. Without pre-existing knowledge of the folder name and contents, it is difficult to query the system for specific images. This is due to the fact that there is currently no fully satisfactory mechanism for categorizing, indexing, and searching cases using the PACS. There is currently no easy mechanism to save teaching, research, or clinical files onto a CD or other removable media or to automatically strip demographic or other patient information from the images. PACS vendors should provide much more sophisticated tools to create and annotate teaching file images in an easy to use but standard format (possibly Radiological Society of North America's Medical Image Resource Center [MIRC] format) that could be exchanged with other sites and other vendors' PAC systems. The privilege to create teaching or conference files should be given to the individual radiologists, technologists, and other users, and an audit

  1. Early experience with a picture archiving and communication system for X-ray CT

    International Nuclear Information System (INIS)

    A network using fiberoptic ring architecture has been implemented to connect an x-ray CT unit with an image work station and optical disk storage unit. The work station has three noninterlaced cathode-ray tube (CRT) monitors of 1,024 X 1,024 pixels. The optical disk system stores 32 optical disk cartridges (2.6 Gbytes per cartridge). A general-purpose interface bus is used for communication between the CT unit and the network interface unit. Transfer time from CT to interface unit is 40 kbyte/second, 5 seconds per image. On-line data acquisition, long-term archiving, and CT interpretation using CRTs have been tested and the system has been working for 3 months in a clinical environment

  2. On the design of reversible QDCA systems.

    Energy Technology Data Exchange (ETDEWEB)

    DeBenedictis, Erik P.; Frank, Michael P. (Florida State University, Tallahassee, FL); Ottavi, Marco; Frost-Murphy, Sarah E. (University of Notre Dame, Notre Dame, IN)

    2006-10-01

    This work is the first to describe how to go about designing a reversible QDCA system. The design space is substantial, and there are many questions that a designer needs to answer before beginning to design. This document begins to explicate the tradeoffs and assumptions that need to be made and offers a range of approaches as starting points and examples. This design guide is an effective tool for aiding designers in creating the best quality QDCA implementation for a system.

  3. Multidisciplinary systems engineering architecting the design process

    CERN Document Server

    Crowder, James A; Demijohn, Russell

    2016-01-01

    This book presents Systems Engineering from a modern, multidisciplinary engineering approach, providing the understanding that all aspects of systems design, systems, software, test, security, maintenance and the full life-cycle must be factored in to any large-scale system design; up front, not factored in later. It lays out a step-by-step approach to systems-of-systems architectural design, describing in detail the documentation flow throughout the systems engineering design process. It provides a straightforward look and the entire systems engineering process, providing realistic case studies, examples, and design problems that will enable students to gain a firm grasp on the fundamentals of modern systems engineering.  Included is a comprehensive design problem that weaves throughout the entire text book, concluding with a complete top-level systems architecture for a real-world design problem.

  4. Campus Information Network Hardware System Design%Campus Information Network Hardware System Design

    Institute of Scientific and Technical Information of China (English)

    刘正勇

    2011-01-01

    The emphasis of constructing and developing the campus information network is how to design and optimize the network hardware system. This paper mainly studies the network system structure design, the server system structure design and the network export

  5. Application and design of solar photovoltaic system

    Science.gov (United States)

    Tianze, Li; Hengwei, Lu; Chuan, Jiang; Luan, Hou; Xia, Zhang

    2011-02-01

    Solar modules, power electronic equipments which include the charge-discharge controller, the inverter, the test instrumentation and the computer monitoring, and the storage battery or the other energy storage and auxiliary generating plant make up of the photovoltaic system which is shown in the thesis. PV system design should follow to meet the load supply requirements, make system low cost, seriously consider the design of software and hardware, and make general software design prior to hardware design in the paper. To take the design of PV system for an example, the paper gives the analysis of the design of system software and system hardware, economic benefit, and basic ideas and steps of the installation and the connection of the system. It elaborates on the information acquisition, the software and hardware design of the system, the evaluation and optimization of the system. Finally, it shows the analysis and prospect of the application of photovoltaic technology in outer space, solar lamps, freeways and communications.

  6. Integrated design for space transportation system

    CERN Document Server

    Suresh, B N

    2015-01-01

    The book addresses the overall integrated design aspects of a space transportation system involving several disciplines like propulsion, vehicle structures, aerodynamics, flight mechanics, navigation, guidance and control systems, stage auxiliary systems, thermal systems etc. and discusses the system approach for design, trade off analysis, system life cycle considerations, important aspects in mission management, the risk assessment, etc. There are several books authored to describe the design aspects of various areas, viz., propulsion, aerodynamics, structures, control, etc., but there is no book which presents space transportation system (STS) design in an integrated manner. This book attempts to fill this gap by addressing systems approach for STS design, highlighting the integrated design aspects, interactions between various subsystems and interdependencies. The main focus is towards the complex integrated design to arrive at an optimum, robust and cost effective space transportation system. The orbit...

  7. AUTOMATIC DESIGNING OF POWER SUPPLY SYSTEMS

    Directory of Open Access Journals (Sweden)

    A. I. Kirspou

    2016-01-01

    Full Text Available Development of automatic designing system for power supply of industrial enterprises is considered in the paper. Its complete structure and principle of operation are determined and established. Modern graphical interface and data scheme are developed, software is completely realized. Methodology and software correspond to the requirements of the up-to-date designing, describe a general algorithm of program process and also reveals properties of automatic designing system objects. Automatic designing system is based on module principle while using object-orientated programming. Automatic designing system makes it possible to carry out consistently designing calculations of power supply system and select the required equipment with subsequent output of all calculations in the form of explanatory note. Automatic designing system can be applied by designing organizations under conditions of actual designing.

  8. Rapid Surface Sampling and Archival Record (RSSAR) System. Topical report, October 1, 1993--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the results of Phase 1 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large tacks of concern to both government and industry. Contaminated and clean materials must be clearly identified and segregated so that the clean materials can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmatory process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible. Aware of the shortcomings of traditional surface characterization technology, GE, with DOE support has undertaken a 12-month effort to complete Phase 1 of a proposed four-phase program to develop the RSSAR system. The objectives of this work are to provide instrumentation to cost-effectively sample concrete and steel surfaces, provide a quick-look indication for the presence or absence of contaminants, and collect samples for later, more detailed analysis in a readily accessible and addressable form. The Rapid Surface Sampling and Archival Record (RSSAR) System will be a modular instrument made up of several components: (1) sampling heads for concrete surfaces, steel surfaces, and bulk samples; (2) quick-look detectors for photoionization and ultraviolet; (3) multisample trapping module to trap and store vaporized contaminants in a manner suitable for subsequent detailed lab-based analyses.

  9. Computer support for mechatronic control system design

    NARCIS (Netherlands)

    Amerongen, van Job; Coelingh, Erik; Vries, de Theo J.A.

    2000-01-01

    This paper discusses the demands for proper tools for computer aided control system design of mechatronic systems and identifies a number of tasks in this design process. Real mechatronic design, involving input from specialists from varying disciplines, requires that the system can be represented i

  10. Computer Aided Control System Design (CACSD)

    Science.gov (United States)

    Stoner, Frank T.

    1993-01-01

    The design of modern aerospace systems relies on the efficient utilization of computational resources and the availability of computational tools to provide accurate system modeling. This research focuses on the development of a computer aided control system design application which provides a full range of stability analysis and control design capabilities for aerospace vehicles.

  11. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume 8 provides a description of instrumentation and controls

  12. Aircraft System Design and Integration

    Directory of Open Access Journals (Sweden)

    D. P. Coldbeck

    2000-01-01

    Full Text Available In the 1980's the British aircraft industry changed its approach to the management of projects from a system where a project office would manage a project and rely on a series of specialist departments to support them to a more process oriented method, using systems engineering models, whose most outwardly visible signs were the introduction of multidisciplinary product teams. One of the problems with the old method was that the individual departments often had different priorities and projects would get uneven support. The change in the system was only made possible for complex designs by the electronic distribution of data giving instantaneous access to all involved in the project. In 1997 the Defence and Aerospace Foresight Panel emphasised the need for a system engineering approach if British industry was to remain competitive. The Royal Academy of Engineering recognised that the change in working practices also changed what was required of a chartered engineer and redefined their requirements in 1997 [1]. The result of this is that engineering degree courses are now judged against new criteria with more emphasis placed on the relevance to industry rather than on purely academic content. At the University of Glasgow it was realized that the students ought to be made aware of current working practices and that there ought to be a review to ensure that the degrees give students the skills required by industry. It was decided to produce a one week introduction course in systems engineering for Masters of Engineering (MEng students to be taught by both university lecturers and practitioners from a range of companies in the aerospace industry with the hope of expanding the course into a module. The reaction of the students was favourable in terms of the content but it seems ironic that the main criticism was that there was not enough discussion involving the students. This paper briefly describes the individual teaching modules and discusses the

  13. The Influence of Building Distributed Archival Database Sys-tem on Archival Com-pilation%分布式档案数据库系统的建立及其对档案编研的影响

    Institute of Scientific and Technical Information of China (English)

    郑慧; 覃筱媚

    2014-01-01

    At the beginning of twenty- first Century, archival compilation under the network be-came one of the hot issues.How-ever, people paid little attention on the distributed archival data-base system applying on the ar-chive compilation. By setting the audience module, archival original database module, the experts module, editing module, the dis-tributed archival database system can have a positive impact on the archival compilation work, archival compilation products dissemina-tion and the open range and it will play an important role on the fu-ture of the archival compilation.%21世纪初,网络环境下的档案编研就成为人们关注的热点问题之一。然而,人们对将分布式档案数据库系统应用于档案编研缺乏足够的关注。分布式档案数据库系统通过分别设置受众模块、档案原文数据库模块、专家模块、编研模块,对档案编研工作环节、档案编研成果传播、档案编研成果开放范围均产生一定积极影响,将对未来的档案编研工作起到重要作用。

  14. DESCRIPTION OF THE IMPLEMENTATION OF PACS (PICTURE ARCHIVING AND COMMUNICATION SYSTEM IN A HOSPITAL-SCHOOL TO REDUCE OPERATING COSTS

    Directory of Open Access Journals (Sweden)

    CRISTIANE PRISCILA GALINA DA SILVA

    2012-01-01

    Full Text Available The PACS (Picture Archiving and Communication System - Communication and Image Archiving was a big technological step for the hospital area, saving time and money, and ensuring the security of data, factors that are important to any organization. It is an archiving and communication system used for diagnostic imaging in digital format that allows immediate access to medical images in any area of a hospital. PACS is also a 'green solution',because by eliminating the radiographic films actually protects the environment and also promotes the expansion of the scope for expansion of care and diagnostics, allowing the participation of other professionals in the decision- and the expansion of diagnostic methods. The aim of this study was to describe the implementation of a PACS system in a teaching hospital, to reduce operating costs due to less use of radiological products such as films and chemicals, thus becoming one of the main reasons that lead hospitals to opt for the deployment of PACS. The practical work was conducted at Hospital das Clinicas (HC, Faculty of Medicine of Botucatu (FMB and had regular visits in order to examine the implementation of PACS used in the field of x-ray for archiving and aid diagnosis using digital images.

  15. Development of an Oceanographic Data Archiving and Service System for the Korean Researchers

    Science.gov (United States)

    Kim, Sung Dae; Park, Hyuk Min; Baek, Sang Ho

    2014-05-01

    Oceanographic Data and Information Center of Korea Institute of Ocean Science and Technology (KIOST) started to develop an oceanographic data archiving and service system in 2010 to support the Korean ocean researchers by providing quality controlled data continuously. Many physical oceanographic data available in the public domain and Korean domestic data were collected periodically, quality controlled, manipulated and provided to ocean modelers who need ocean data continuously and marine biologists who don't know well physical data but need it. The northern limit and the southern limit of the spatial coverage are 20°N and 55°N, and the western limit and the eastern limit are 110°E and 150°E, respectively. To archive TS (Temperature and Salinity) profile data, ARGO data were gathered from ARGO GDACs (France and USA) and many historical TS profile data observed by CTD, OSD and BT were retrieved from World Ocean Database 2009. The quality control software for TS profile data, which meets QC criteria suggested by the ARGO program and the GTSPP (Global Temperature-Salinity Profile Program), was programmed and applied to the collected data. By the end of 2013, the total number of vertical profile data from the ARGO GDACs was 59,642 and total number of station data from WOD 2009 was 1,604,422. We also collected the global satellite SST data produced by NCDC and global SSH data from AVISO every day. An automatic program was coded to collect satellite data, extract sub data sets of the North West Pacific area and produce distribution maps. The total number of collected satellite data sets was 3,613 by the end of 2013. We use 3 different data services to provide archived data to the Korean experts. A FTP service was prepared to allow data users to download data in the original format. We developed TS database system using Oracle RDBMS to contain all collected temperature salinity data and support SQL data retrieval with various conditions. The KIOST ocean data portal

  16. Archiving challenges

    OpenAIRE

    Ringersma, J.

    2010-01-01

    Teaching slides on: What is a digital archive? Parties involved in digital archiving Archiving challenges organization of data coherence and persistency access and safety Language archiving software Different users, different needs For: Saami Language Documentation and Revitalization. Winter school, Bodø, Norway

  17. Anatomy of picture archiving and communications systems: Nuts and bolts—Image acquisition: Getting digital images from imaging modalities

    OpenAIRE

    Andriole, Katherine P.

    1999-01-01

    Digital acquisition of data from the various imaging modalities for input to a picture archiving and communication system (PACS) is discussed. Essential features for successful clinical implementation including Digital Imaging and Communications in Medicine (DICOM) compliance, radiology information system (RIS)/hospital information system (HIS) interfacing, and workflow integration are detailed. Image acquisition from the inherently digital cross-sectional modalities are described, as well as...

  18. Electromagnetic System Design and Visual Simulation

    Institute of Scientific and Technical Information of China (English)

    ZHANGJing-shu; CHENDe-gui; NIUChun-ping

    2004-01-01

    An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design,optimization design, dynamic and static characteristics, and visual simulation. All empirical parameters and curves used in design process are stored in database. Through human-computer interactions, an electromagnetic system can be designed conveniently with the results and characteristics curves displayed in graphic model. Using this system can greatly shorten the process of product design, and the results satisfy technical requirements.

  19. Fengyun Series Meteorological Satellite Data Archiving and Service System%风云气象卫星数据存档与服务系统

    Institute of Scientific and Technical Information of China (English)

    钱建梅; 孙安来; 徐喆; 咸迪; 高云; 罗敬宁; 郑旭东

    2012-01-01

    The Internet, WebGIS, distributed spatial database, three-dimensional global images and several derivative technologies are developing rapidly in the 21st century. The meteorological satellite data has following features: Huge amount of daily data volume and archived data volume, high frequency of the historical data download, and the data users distribute around the world. In order to meet the needs, meteorological satellite data archiving and service system is constructed, focusing on high frequency data archiving and management for high capacity. The system provide users with a variety of fast and convenient query retrieval and efficient data downloading methods, as well as satellite data displaying from multiple angles and Internet-based data services. Meteorological satellite data archiving and service system developed by National Satellite Meteorological Center relies on Fengyun series satellites. The system construction takes on unified design, rolling development and batch expansion method. It is a comprehensive information service system of meteorological satellites. The system adopts today's advanced and sophisticated computer technology, storage technology, network data retrieval technology, database technology, information dynamic release technology and GIS technology to establish a new generation of national environmental data archiving and service system through FY-2 and FY-3 series satellite ground application system. It takes account of foreign meteorological satellite data. It can not only provides data retrieval service, but also help all kinds of users to share satellite data with various aids and information, meeting all domestic and international users' demands. Meteorological satellite data archiving and service system integrates several high-performance servers, high availability disk array, large-scale automated tape library as well as system software, database software, storage software and application software, all of which constitutes

  20. Interest of including trauma photography in the picture archiving and communication system of a teaching hospital.

    Science.gov (United States)

    Bronsard, N; Chignon Sicard, B; Amoretti, N; Rottier, H; Ertz, P; de Peretti, F

    2015-05-01

    Digital imaging is a daily practice in traumatology. Such photographs should remain confidential. However, there is a need for objectivity concerning the circumstances and clinical follow-up for trauma patients. This paper describes how to conserve these photographs within the picture archiving and communication system (PACS) safely as regards identity and confidentiality. A computer converts the photographs into DICOM files. The DICOM image is associated to a reconciliation layer, validated by the physician in charge, and then included in the hospital PACS. This improves transmission from one medical team to another, both initially and after the accident if an expert medical opinion is required. The literature has demonstrated the value of photographs in modern medicine, but the technical and legal challenges are many. They enhance the computerized medical records. Identification, confidentiality and integration in the PACS are obstacles that we have now overcome.

  1. Automated storage and retrieval system design report

    OpenAIRE

    Eaglesham, Mark A.

    1995-01-01

    This report describes the design and operation of an Automated Storage and Retrieval System (AS/RS) to serve the Flexible Manufacturing and Assembly System (FMAS) in the Manufacturing Systems Laboratory at Virginia Tech. The system requirements of the AS/RS, justification of design choices, and the proposed modes of operating the system are described. The AS/RS was designed to automatically move material on pallets between the storage racks in the laboratory to the FMAS conveyor interface....

  2. Nonfunctional requirements in systems analysis and design

    CERN Document Server

    Adams, Kevin MacG

    2015-01-01

    This book will help readers gain a solid understanding of non-functional requirements inherent in systems design endeavors. It contains essential information for those who design, use, and maintain complex engineered systems, including experienced designers, teachers of design, system stakeholders, and practicing engineers. Coverage approaches non-functional requirements in a novel way by presenting a framework of four systems concerns into which the 27 major non-functional requirements fall: sustainment, design, adaptation, and viability. Within this model, the text proceeds to define each non-functional requirement, to specify how each is treated as an element of the system design process, and to develop an associated metric for their evaluation. Systems are designed to meet specific functional needs. Because non-functional requirements are not directly related to tasks that satisfy these proposed needs, designers and stakeholders often fail to recognize the importance of such attributes as availability, su...

  3. Cost Optimal System Identification Experiment Design

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    the experiment design are not based on obtained experimental data. Instead the decisions are based on the expected experimental data assumed to be obtained from the measurements, estimated based on prior information and engineering judgement. The design method provides a system identification experiment design...... reflecting the cost of the experiment and the value of obtained additional information. An example concerning design of an experiment for parametric identification of a single degree of freedom structural system shows the applicability of the experiment design method....

  4. Design thinking support: information systems versus reasoning

    OpenAIRE

    Pauwels, Pieter; Meyer, Ronald; Van Campenhout, Jan

    2013-01-01

    Numerous attempts have been made to conceive and implement appropriate information systems to support architectural designers in their creative design thinking processes. These information systems aim at providing support in very diverse ways: enabling designers to make diverse kinds of visual representations of a design, enabling them to make complex calculations and simulations which take into account numerous relevant parameters in the design context, providing them with loads of informati...

  5. System level ESD co-design

    CERN Document Server

    Gossner, Harald

    2015-01-01

    An effective and cost efficient protection of electronic system against ESD stress pulses specified by IEC 61000-4-2 is paramount for any system design. This pioneering book presents the collective knowledge of system designers and system testing experts and state-of-the-art techniques for achieving efficient system-level ESD protection, with minimum impact on the system performance. All categories of system failures ranging from ‘hard’ to ‘soft’ types are considered to review simulation and tool applications that can be used. The principal focus of System Level ESD Co-Design is defining and establishing the importance of co-design efforts from both IC supplier and system builder perspectives. ESD designers often face challenges in meeting customers' system-level ESD requirements and, therefore, a clear understanding of the techniques presented here will facilitate effective simulation approaches leading to better solutions without compromising system performance. With contributions from Robert Asht...

  6. ROUTE PLAN DESIGNER FOR TRACTOR GUIDANCE SYSTEMS

    DEFF Research Database (Denmark)

    Sveistrup, Daniel; Jørgensen, Rasmus Nyholm; Green, Ole;

    2010-01-01

    Earlier works have shown field trial designs to be very labor extensive, even when combining autoguidancesystems with conventional machinery.Designing routes for semi-automated systems in a controlled manner is both resource demandingand complicated. Different types of auto-guidance systems vary...... was outlined, it took less thanone hour entering the design into the software and generating the auto-guidance files.KeywordsGIS, Auto steering systems, plot trial design, full-scale field trials, Java...

  7. Archiving data processing of WinCC V6

    Institute of Scientific and Technical Information of China (English)

    Zhen,Lidong; Wei,Jin; Niu,Wenyong; Li,Jianping

    2005-01-01

    In practice, the process data is the most important.We need to manage the data with the certain format in both Online and Offline. Wincc V6 is powerful HMI system. With it,we configure the interface and archive the process data. Due to the archives in Wincc V6 are compressed and not stored in the main memory, so we must export them. With version 6, Wincc offers the design environment of Visual Basic Script(VBS). Use VBS, we can change the data format to certain format easily.This paper offers a solution to export data of archives into Excel.

  8. Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

    Energy Technology Data Exchange (ETDEWEB)

    Ermi, A.M.

    1997-05-01

    Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.

  9. Course on System Design (structural approach)

    CERN Document Server

    Levin, Mark Sh

    2011-01-01

    The article describes a course on system design (structural approach) which involves the following: issues of systems engineering; structural models; basic technological problems (structural system modeling, modular design, evaluation/comparison, revelation of bottlenecks, improvement/upgrade, multistage design, modeling of system evolution); solving methods (optimization, combinatorial optimization, multicriteria decision making); design frameworks; and applications. The course contains lectures and a set of special laboratory works. The laboratory works consist in designing and implementing a set of programs to solve multicriteria problems (ranking/selection, multiple choice problem, clustering, assignment). The programs above are used to solve some standard problems (e.g., hierarchical design of a student plan, design of a marketing strategy). Concurrently, each student can examine a unique applied problem from his/her applied domain(s) (e.g., telemetric system, GSM network, integrated security system, tes...

  10. Turbine Aerodynamic Design System Improvements

    Science.gov (United States)

    Huber, Frank W.; Griffin, Lisa W.; Simpson, Steven P.

    2003-01-01

    Presentation outline includes the following: 1. Volute manifold design and analysis methodology. 2. Meanline modification for compatibility with engine analysis code. Objective is to develop a manifold design methodology for turbines and pumps, and to enable rapid screening of candidate flow paths.

  11. Initial design of a relational database system for NPS computer asset identification and valuation for Risk Assessment.

    OpenAIRE

    Thompson, Fred W.

    1985-01-01

    Relational database technology is examined as a means to cupport computer Risk Assessment at the Naval Postgraduate School. The current methodology for conducting computer Risk Assessment within the Department of the Navy is used to construct an initial design for a relational database system. The initial design focuses on computer asset identification and valuation as the first step of the computer Risk Assessment process. http://archive.org/details/initialdesignofr00thom NA NA

  12. A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

    Directory of Open Access Journals (Sweden)

    H. Asilian Mahabady

    2007-09-01

    Full Text Available A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and fan dimension data calculations. Automatic system balance is another feature of this package. Exhaust Ventilation Design Software algorithm for design is based on two methods: Balance by design (Static pressure balance and design by Blast gate. The most important section of software is a spreadsheet that is designed based on American Conference of Governmental Industrial Hygienists calculation sheets. Exhaust Ventilation Design Software is developed so that engineers familiar with American Conference of Governmental Industrial Hygienists datasheet can easily employ it for ventilation systems design. Other sections include Collector design section (settling chamber, cyclone, and packed tower, fan geometry and dimension data section, a unit converter section (that helps engineers to deal with units, a hood design section and a Persian HTML help. Psychometric correction is also considered in Exhaust Ventilation Design Software. In Exhaust Ventilation Design Software design process, efforts are focused on improving GUI (graphical user interface and use of programming standards in software design. Reliability of software has been evaluated and results show acceptable accuracy.

  13. Research on conceptual design of mechatronic systems

    Indian Academy of Sciences (India)

    Xu Yong; Zou Huijun; Li Ruiqin

    2006-12-01

    Based on the fact that function-structure generating and function solving are alternant processes with mutual causality during the conceptual design phase of mechatronic systems, a conceptual design cyclic feedback solving model of a mechatronic system is put forward on the basis of mapping between function layer, effect layer, working principle layer and structure layer. The process of solving single and system functions is analysed. Key technologies of interface matching and function solving are then advanced. Finally, a computer-aided conceptual design automatic software system for mechatronic systems is developed and the conceptual design of a computerised embroidery machine is given as an example.

  14. Designing a new class of distributed systems

    CERN Document Server

    Mikkilineni, Rao

    2011-01-01

    Designing a New Class of Distributed Systems closely examines the Distributed Intelligent Managed Element (DIME) Computing Model, a new model for distributed systems, and provides a guide to implementing Distributed Managed Workflows with High Reliability, Availability, Performance and Security. The book also explores the viability of self-optimizing, self-monitoring autonomous DIME-based computing systems. Designing a New Class of Distributed Systems is designed for practitioners as a reference guide for innovative distributed systems design. Researchers working in a related field will also f

  15. Embedded Systems Design: Optimization Challenges

    DEFF Research Database (Denmark)

    Pop, Paul

    2005-01-01

    Summary form only given. Embedded systems are everywhere: from alarm clocks to PDAs, from mobile phones to cars, almost all the devices we use are controlled by embedded systems. Over 99% of the microprocessors produced today are used in embedded systems, and recently the number of embedded systems...

  16. Harnessing VLSI System Design with EDA Tools

    CERN Document Server

    Kamat, Rajanish K; Gaikwad, Pawan K; Guhilot, Hansraj

    2012-01-01

    This book explores various dimensions of EDA technologies for achieving different goals in VLSI system design. Although the scope of EDA is very broad and comprises diversified hardware and software tools to accomplish different phases of VLSI system design, such as design, layout, simulation, testability, prototyping and implementation, this book focuses only on demystifying the code, a.k.a. firmware development and its implementation with FPGAs. Since there are a variety of languages for system design, this book covers various issues related to VHDL, Verilog and System C synergized with EDA tools, using a variety of case studies such as testability, verification and power consumption. * Covers aspects of VHDL, Verilog and Handel C in one text; * Enables designers to judge the appropriateness of each EDA tool for relevant applications; * Omits discussion of design platforms and focuses on design case studies; * Uses design case studies from diversified application domains such as network on chip, hospital on...

  17. Characterization of Instructor and Student Use of Ubiquitous Presenter, a Presentation System Enabling Spontaneity and Digital Archiving

    Science.gov (United States)

    Price, Edward; Malani, Roshni; Simon, Beth

    2007-01-01

    Ubiquitous Presenter (UP) is a digital presentation system that allows an instructor with a Tablet PC to spontaneously modify prepared slides, while automatically archiving the inked slides on the web. For two introductory physics classes, we examine the types of slides instructors prepare and the ways in which they add ink to the slides. Modes of usage include: using ink to explicitly link multiple representations; making prepared figures dynamic by animating them with ink; and preparing slides with sparse text or figures, then adding extensive annotations during class. In addition, through an analysis of surveys and of web server logs, we examine student reaction to the system, as well as how often and in what ways students' utilize archived material. In general, students find the system valuable and frequently review the presentations online.

  18. Experimental design-based functional mining and characterization of high-throughput sequencing data in the sequence read archive.

    Directory of Open Access Journals (Sweden)

    Takeru Nakazato

    Full Text Available High-throughput sequencing technology, also called next-generation sequencing (NGS, has the potential to revolutionize the whole process of genome sequencing, transcriptomics, and epigenetics. Sequencing data is captured in a public primary data archive, the Sequence Read Archive (SRA. As of January 2013, data from more than 14,000 projects have been submitted to SRA, which is double that of the previous year. Researchers can download raw sequence data from SRA website to perform further analyses and to compare with their own data. However, it is extremely difficult to search entries and download raw sequences of interests with SRA because the data structure is complicated, and experimental conditions along with raw sequences are partly described in natural language. Additionally, some sequences are of inconsistent quality because anyone can submit sequencing data to SRA with no quality check. Therefore, as a criterion of data quality, we focused on SRA entries that were cited in journal articles. We extracted SRA IDs and PubMed IDs (PMIDs from SRA and full-text versions of journal articles and retrieved 2748 SRA ID-PMID pairs. We constructed a publication list referring to SRA entries. Since, one of the main themes of -omics analyses is clarification of disease mechanisms, we also characterized SRA entries by disease keywords, according to the Medical Subject Headings (MeSH extracted from articles assigned to each SRA entry. We obtained 989 SRA ID-MeSH disease term pairs, and constructed a disease list referring to SRA data. We previously developed feature profiles of diseases in a system called "Gendoo". We generated hyperlinks between diseases extracted from SRA and the feature profiles of it. The developed project, publication and disease lists resulting from this study are available at our web service, called "DBCLS SRA" (http://sra.dbcls.jp/. This service will improve accessibility to high-quality data from SRA.

  19. Quality in Ubiquitous Information System Design

    OpenAIRE

    Dupuy-Chessa, Sophie

    2009-01-01

    International audience Information systems become ubiquitous. This opens a large spectrum of the possibilities for the end-users, but the design complexity is increasing. Therefore insuring quality during design is more than ever a challenge. In this article, we study this challenge by identifying the specificities of ubiquitous computing design and by considering the influence of these specificities on the quality of the various aspects of information system design (models, languages, pro...

  20. Systems design of long-life systems

    Science.gov (United States)

    Miles, R. F., Jr.

    1974-01-01

    A long-life system is defined as a system which cannot be life-tested in its operational environment. Another restriction is that preventive maintenance and repair shall be either impossible or economically disadvantageous. Examples of such systems include planetary spacecraft, communication satellites, undersea telephone cables, and nuclear power plants. The questions discussed are related to the implementation of system functions, approaches to determine the required level of system reliability, and aspects of tradeoffs between requirements and reliability.

  1. Residential solar-heating system - design brochure

    Science.gov (United States)

    1978-01-01

    Design brochure for commercially-available solar-heating system is valuable to architects, engineers, and designers. It contains information on system configuration, system sizing, and mechanical layout. Drawings and specifications of all components and typical installation details are included in appendix.

  2. An overview of the use of Open Source in the NASA Langley Atmospheric Science Data Center Archive Next Generation system

    Science.gov (United States)

    Dye, R. A.; Perez, J.; Piatko, P. J.; Coogan, S. P.; Parker, L.

    2012-12-01

    The Atmospheric Science Data Center (ASDC) at NASA Langley Research Center is responsible for the archive and distribution of Earth science data in the areas of radiation budget, clouds, aerosols, and tropospheric chemistry. Over the past several years the ASDC has developed and implemented the Archive Next Generation (ANGe) system, a state-of-the-art data ingest, archival, and distribution system to serve the atmospheric sciences data provider and user communities. ANGe employs Open Source technologies including the JBoss Application Server, a PostGIS-enabled PostgreSQL database system to store geospatial metadata, modules from the GeoTools Open Source Java GIS Toolkit including the Java Topology Suite (JTS) and GeoAPI libraries, and other libraries such as the Spring framework. ANGe was developed using a suite of several Open Source tools comprised of Eclipse, Ant, Subversion and Jenkins. ANGe is also deployed into an operational environment that leverages Open Source technologies from the Linux Operating system to tools such as Ganglia for monitoring. This presentation provides an overview of ANGe with a focus on the Open Source technologies employed in the implementation and deployment of the system. The ASDC is part of Langley's Science Directorate. The Data Center was established in 1991 to support NASA's Earth Observing System and the U.S. Global Change Research Program. It is unique among NASA data centers in the size of its archive, cutting edge computing technology, and full range of data services. For more information regarding ASDC data holdings, documentation, tools and services, visit http://eosweb.larc.nasa.gov.

  3. Integrated design of legged mechatronic system

    Institute of Scientific and Technical Information of China (English)

    ChinYin CHEN; IMing CHEN; ChiCheng CHENG

    2009-01-01

    This paper presents a system based on the integrated design and experiment for a one degree-of-freedom (DOF) legged mechatronic system (LMTS). A six-bar linkage mechanism, which is derived from a four-bar linkage with a symmetrical coupler point and pantograph into one, is designed, and common controllers are used to control the velocity and position loops.For system-based dynamic optimization, the design for control (DFC) approach is used to integrate the structure and control for improving dynamic performance with reduced control torque.Finally, for a rapid 3D graphical based implementation of the system, high-level computer-aided rapid system integration (CARSI) technology is used to integrate the structure design, controller design, and system implemen-tation into the design and analytical software environment based on Pro/engineer, XML syntax, Simmechanics, and Simulink. Thus, the development time for the LMTS is reduced.

  4. Designing Systems in an Organizational Context

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    recording, document analysis, and the like. Also I have set up participatory analysis and design workshops. One of the design projects was an experiment with a systems approach, Work Analysis, an approach that originates in an ESPRIT-project, FAOR (Functional Analysis of Office Requirements). The goal......-based systems. The research objective behind this dissertation aims at developing theories of and approaches to systems design, which should provide a basis for designers to improve their work practices. In other words, this dissertation contributes to a clarification of what is going on in design, and how we...

  5. Systemic Design: Two Canadian Case Studies

    OpenAIRE

    Alex Ryan; Mark Leung

    2014-01-01

    This paper introduces two novel applications of systemic design to facilitate a comparison of alternative methodologies that integrate systems thinking and design. In the first case study, systemic design helped the Procurement Department at the University of Toronto re-envision how public policy is implemented and how value is created in the broader university purchasing ecosystem. This resulted in an estimated $1.5 million in savings in the first year, and a rise in user retention rates fro...

  6. Design of Staffs Assessing System

    OpenAIRE

    Hůlová, Iva

    2011-01-01

    This thesis deals with the staff assessment system in the organization in connection with reward system. This thesis is divided into the theoretical part and the practical part. The theoretical part describes the concept of staff assessment system and system of reward. Within the frame of staff assessing in addition to these tasks further the basic and additional assessment methods are explained, assessment criteria and also the errors and problems connected with the staff assessing. The c...

  7. Hybrid systems controller design methodology

    OpenAIRE

    Pluska, Michal; Sinclair, David

    2010-01-01

    peer-reviewed Around ninety percent of vehicle innovations are driven mainly by electronics. The software implementing control algorithms combines the sensor values and calculates some meaningful actuator signals. On the other hand software in the vehicle can be seen as a part of a hybrid system. The hybrid system is a dynamic system that can have both continuous and discrete dynamic behaviour, its mean a system is described by both a differential equation and a difference equation. Moreov...

  8. From Design Specification to SystemC

    Directory of Open Access Journals (Sweden)

    Rachid Boudour

    2006-01-01

    Full Text Available In this paper, we present a framework for transforming the design model into SystemC code. Such a framework uses as input UML state machine and object diagrams, which are more and more used as design models in embedded systems. To do this, we have firstly used Poseidon tool for editing the design model and generating the XMI representation, and secondly integrated a transformation module leading to SystemC code. The mapping to SystemC code offers not only a system-level executable specification, but also a means to facilitating the system partitioning in hardware and software parts.

  9. Challenges in Designing Mechatronic Systems

    DEFF Research Database (Denmark)

    Torry-Smith, Jonas; Qamar, Ahsan; Achiche, Sofiane;

    2013-01-01

    Development of mechatronic products is traditionally carried out by several design experts from different design domains. Performing development of mechatronic products is thus greatly challenging. In order to tackle this, the critical challenges in mechatronics have to be well understood and well...... supported through applicable methods and tools. This paper aims at identifying the major challenges, by conducting a systematic and thorough survey of the most relevant research work in mechatronic design. Solutions proposed in literature are assessed and illustrated through a case study in order...... to investigate if the challenges can be handled appropriately by the methods, tools, and mindsets suggested by the mechatronic community. Using a real world mechatronics case, the paper identifies the areas where further research is required, by showing a clear connection between the actual problems faced during...

  10. Systemic Design: Two Canadian Case Studies

    Directory of Open Access Journals (Sweden)

    Alex Ryan

    2014-12-01

    Full Text Available This paper introduces two novel applications of systemic design to facilitate a comparison of alternative methodologies that integrate systems thinking and design. In the first case study, systemic design helped the Procurement Department at the University of Toronto re-envision how public policy is implemented and how value is created in the broader university purchasing ecosystem. This resulted in an estimated $1.5 million in savings in the first year, and a rise in user retention rates from 40% to 99%. In the second case study, systemic design helped the clean energy and natural resources group within the Government of Alberta to design a more efficient and effective resource management system and shift the way that natural resource departments work together. This resulted in the formation of a standing systemic design team and contributed to the creation of an integrated resource management system. A comparative analysis of the two projects identifies a shared set of core principles for systemic design as well as areas of differentiation that reveal potential for learning across methodologies. Together, these case studies demonstrate the complementarity of systems thinking and design thinking, and show how they may be integrated to guide positive change within complex sociotechnical systems.

  11. An overview on integrated data system for archiving and sharing marine geology and geophysical data in Korea Institute of Ocean Science & Technology (KIOST)

    Science.gov (United States)

    Choi, Sang-Hwa; Kim, Sung Dae; Park, Hyuk Min; Lee, SeungHa

    2016-04-01

    We established and have operated an integrated data system for managing, archiving and sharing marine geology and geophysical data around Korea produced from various research projects and programs in Korea Institute of Ocean Science & Technology (KIOST). First of all, to keep the consistency of data system with continuous data updates, we set up standard operating procedures (SOPs) for data archiving, data processing and converting, data quality controls, and data uploading, DB maintenance, etc. Database of this system comprises two databases, ARCHIVE DB and GIS DB for the purpose of this data system. ARCHIVE DB stores archived data as an original forms and formats from data providers for data archive and GIS DB manages all other compilation, processed and reproduction data and information for data services and GIS application services. Relational data management system, Oracle 11g, adopted for DBMS and open source GIS techniques applied for GIS services such as OpenLayers for user interface, GeoServer for application server, PostGIS and PostgreSQL for GIS database. For the sake of convenient use of geophysical data in a SEG Y format, a viewer program was developed and embedded in this system. Users can search data through GIS user interface and save the results as a report.

  12. Development of "ARchive system for Cross-reference Across Distributed Environment (ARCADE)" Based on Shibboleth

    Science.gov (United States)

    Matsuhira, T.; Kasahara, Y.; Takata, Y.

    2011-12-01

    In the fields of Earth and space sciences, large amount of experimental and observation data have been generated day by day. It is quite important not only for researchers in the field but also for general researchers in the other fields to cross-refer and make comprehensive analysis using various kinds of data obtained by many observatories and institutes in order to clarify the global picture of the environment. Under this background, it has been pointed out that we have to construct database systems properly, and establish a procedure with which scientists can easily cross-refer these data across organizational boundaries. Especially in the fields of Earth and space sciences, most researchers carry out their research belonging to scientific projects organized by several laboratories and/or research groups. It is quite difficult to define data access policy to their contents simply as fully open access or subscribers only. That is to say, there are many kinds of data access policy depending on the data. The purpose of this research is to develop a data managing system by which data owner can easily open their own data to the appropriate users across organizational boundaries. In this research, we introduced Shibboleth, which is an open source software based on SAML2.0 protocol for single sign-on across or within organizational boundaries. By using Shibboleth, we developed an application system named ARchive system for Cross-reference Across Distributed Environment (ARCADE). ARCADE is implemented by Java language. It makes possible to share, upload and download data files among closed communities. We also implemented GUI in ARCADE so that any user can utilize the system just using drag-and-drop action. In this poster, we introduce the configuration of our system and discuss its adaptation to an actual setting.

  13. An Expert System Approach for Garden Designing

    Directory of Open Access Journals (Sweden)

    NiloofarMozafari

    2012-10-01

    Full Text Available In the recent years, the quality of human life is improved by artificial intelligencetechniques. In artificial intelligence, an expert system is a computer system that emulates thedecision-making ability of a human expert. Expert systems are designed to solve complexproblems by reasoning about knowledge, like an expert. In this paper, we propose an expertsystem with the aim of designing the garden with considering the different taste of thepeople. The proposed system can help people to design their garden themselves. Indeed, it isable to use by architectures to provide decision support system, interactive training tool andexpert advice. The system constitutes part of intelligent system of designing the garden. Aninitial evaluation of the expert system was carried out and a positive feedback was receivedfrom the users.

  14. The OpenAIRE data infrastructure services on interlinking european institutional repositories, dataset archives, and CRIS systems

    OpenAIRE

    Manghi, Paolo; Bolikowski, Lukasz; Manola, Natalia; Schirrwagen, Jochen; Rettberg, Najla; Smith, Tim

    2012-01-01

    The OpenAIREplus project (Open Access Infrastructure for Research in Europe Plus, Dec 2011 - May 2014) aims at realizing and maintaining the European scholarly communication data infrastructure.1 To this aim, the data infrastructure collects and interlinks content from repositories (i.e., OA and non-OA publications), dataset archives (i.e., research datasets), and CRIS systems (i.e., funding information from European Commission and National funding schemes), and supports advanced metrics to m...

  15. Aviation System Analysis Capability Executive Assistant Design

    Science.gov (United States)

    Roberts, Eileen; Villani, James A.; Osman, Mohammed; Godso, David; King, Brent; Ricciardi, Michael

    1998-01-01

    In this technical document, we describe the design developed for the Aviation System Analysis Capability (ASAC) Executive Assistant (EA) Proof of Concept (POC). We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models within the ASAC system, and describe the design process and the results of the ASAC EA POC system design. We also describe the evaluation process and results for applicable COTS software. The document has six chapters, a bibliography, three appendices and one attachment.

  16. [Development of a batched image delete system for multi-vender picture archiving and communication system environment].

    Science.gov (United States)

    Yamada, Kenji; Amano, Masafumi; Yuasa, Masao; Yamamoto, Yuichiro; Tada, Akihisa; Harada, Masafumi

    2014-01-01

    A picture archiving and communication system (PACS) for multi-vendor imaging servers is useful, since it can provide a variety of image-processing services. However, to delete an image file in the PACS, it is necessary to delete not only the image but all its associated images that are stored in multiple servers: this is a lengthy and painstaking process. To reduce this workload, we have developed a system consisting of a computer program with a graphical user interface that can delete the target image and all related images by means of batch processing. The developed system creates an extensible markup language (XML)-format file that describes the operation for deleting an image and forwards the XML file to the main server. Using a Windows file-sharing system (SMB/CIFS), each server shares the XML file and deletes the images in its own database in response to the instructions described in the XML file. We can also rigorously manage information concerning the deleted images using the information that is output from the main server to external storage. We also discuss the degree of load reduction in our system compared with that of ordinary systems.

  17. Sequence Read Archive (SRA)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Sequence Read Archive (SRA) stores raw sequencing data from the next generation of sequencing platforms including Roche 454 GS System®, Illumina Genome...

  18. Design concept of Hydro cascade control system

    International Nuclear Information System (INIS)

    In this paper a design concept of the comple hydro cascade scheme is presented with the design parameters of the main technical features. The cascade control system architecture is designed considering up-to-date communication and information technology. The control algorithm is based on Pond Level Control and Economic Load Allocation concepts.

  19. Design evaluation of emergency core cooling systems using Axiomatic Design

    International Nuclear Information System (INIS)

    In designing nuclear power plants (NPPs), the evaluation of safety is one of the important issues. As a measure for evaluating safety, this paper proposes a methodology to examine the design process of emergency core cooling systems (ECCSs) in NPPs using Axiomatic Design (AD). This is particularly important for identifying vulnerabilities and creating solutions. Korean Advanced Power Reactor 1400 MWe (APR1400) adopted the ECCS, which was improved to meet the stronger safety regulations than that of the current Optimized Power Reactor 1000 MWe (OPR1000). To improve the performance and safety of the ECCS, the various design strategies such as independency or redundancy were implemented, and their effectiveness was confirmed by calculating core damage frequency. We suggest an alternative viewpoint of evaluating the deployment of design strategies in terms of AD methodology. AD suggests two design principles and the visualization tools for organizing design process. The important benefit of AD is that it is capable of providing suitable priorities for deploying design strategies. The reverse engineering driven by AD has been able to show that the design process of the ECCS of APR1400 was improved in comparison to that of OPR1000 from the viewpoint of the coordination of design strategies

  20. ESS Cryogenic System Process Design

    Science.gov (United States)

    Arnold, P.; Hees, W.; Jurns, J.; Su, X. T.; Wang, X. L.; Weisend, J. G., II

    2015-12-01

    The European Spallation Source (ESS) is a neutron-scattering facility funded and supported in collaboration with 17 European countries in Lund, Sweden. Cryogenic cooling at ESS is vital particularly for the linear accelerator, the hydrogen target moderators, a test stand for cryomodules, the neutron instruments and their sample environments. The paper will focus on specific process design criteria, design decisions and their motivations for the helium cryoplants and auxiliary equipment. Key issues for all plants and their process concepts are energy efficiency, reliability, smooth turn-down behaviour and flexibility. The accelerator cryoplant (ACCP) and the target moderator cryoplant (TMCP) in particular need to be prepared for a range of refrigeration capacities due to the intrinsic uncertainties regarding heat load definitions. Furthermore the paper addresses questions regarding process arrangement, 2 K cooling methodology, LN2 precooling, helium storage, helium purification and heat recovery.

  1. Implantable intraocular pressure monitoring systems: Design considerations

    KAUST Repository

    Arsalan, Muhammad

    2013-12-01

    Design considerations and limitations of implantable Intraocular Pressure Monitoring (IOPM) systems are presented in this paper. Detailed comparison with the state of the art is performed to highlight the benefits and challenges of the proposed design. The system-on-chip, presented here, is battery free and harvests energy from incoming RF signals. This low-cost design, in standard CMOS process, does not require any external components or bond wires to function. This paper provides useful insights to the designers of implantable wireless sensors in terms of design choices and associated tradeoffs. © 2013 IEEE.

  2. An overview of the Software Development Process for the NASA Langley Atmospheric Data Center Archive Next Generation system

    Science.gov (United States)

    Piatko, P.; Perez, J.; Kinney, J. B.

    2013-12-01

    The Atmospheric Science Data Center (ASDC) at NASA Langley Research Center is responsible for the archive and distribution of Earth science data in the areas of radiation budget, clouds, aerosols, and tropospheric chemistry. The ASDC has developed and implemented the Archive Next Generation (ANGe) system, a state-of-the-art data ingest, archival, and distribution system to serve the atmospheric sciences data provider and user communities. The ANGe project follows a software development process that covers the full life-cycle of the system, from initial requirements to deployment to production to long-term maintenance of the software. The project uses several tools to support the different stages of the process, such as Subversion for source code control, JIRA for change management, Confluence for documentation and collaboration, and Bamboo for continuous integration. Based on our experience with developing ANGe and other projects at the ASDC, we also provide support for local science projects by setting up Subversion repositories and tools such as Trac, and providing training and support on their use. An overview of the software development process and the tools used to support it will be presented.

  3. Accelerating Science Driven System Design With RAMP

    Energy Technology Data Exchange (ETDEWEB)

    Wawrzynek, John [Univ. of California, Berkeley, CA (United States)

    2015-05-01

    Researchers from UC Berkeley, in collaboration with the Lawrence Berkeley National Lab, are engaged in developing an Infrastructure for Synthesis with Integrated Simulation (ISIS). The ISIS Project was a cooperative effort for “application-driven hardware design” that engages application scientists in the early parts of the hardware design process for future generation supercomputing systems. This project served to foster development of computing systems that are better tuned to the application requirements of demanding scientific applications and result in more cost-effective and efficient HPC system designs. In order to overcome long conventional design-cycle times, we leveraged reconfigurable devices to aid in the design of high-efficiency systems, including conventional multi- and many-core systems. The resulting system emulation/prototyping environment, in conjunction with the appropriate intermediate abstractions, provided both a convenient user programming experience and retained flexibility, and thus efficiency, of a reconfigurable platform. We initially targeted the Berkeley RAMP system (Research Accelerator for Multiple Processors) as that hardware emulation environment to facilitate and ultimately accelerate the iterative process of science-driven system design. Our goal was to develop and demonstrate a design methodology for domain-optimized computer system architectures. The tangible outcome is a methodology and tools for rapid prototyping and design-space exploration, leading to highly optimized and efficient HPC systems.

  4. Integrated Design of Antibodies for Systems Biology Using Ab Designer

    OpenAIRE

    Pisitkun, Trairak; Dummer, Patrick; Somparn, Poorichaya; Hirankarn, Nattiya; Kopp, Jeffrey B.; Knepper, Mark A.

    2014-01-01

    In the current era of large-scale biology, systems biology has evolved as a powerful approach to identify complex interactions within biological systems. In addition to high throughput identification and quantification techniques, methods based on high-quality mono-specific antibodies remain an essential element of the approach. To assist the large-scale design and production of peptide-directed antibodies for systems biology studies, we developed a fully integrated online application, AbDesi...

  5. Simulation systems: design and applications

    Directory of Open Access Journals (Sweden)

    Liudmila Burtseva

    1996-09-01

    Full Text Available In this paper the history of Simulation System Group investigations is presented. Some important achievements in past and present time are marked. The directions of future investigations are discussed in the fourth section of the paper.

  6. Designing comprehensible self-organising systems

    NARCIS (Netherlands)

    Höning, N.F.; La Poutré, J.A.

    2010-01-01

    Self-organising systems are a popular engineering concept for designing decentralised autonomic computing systems. They are able to find solutions in complex and versatile problem domains, but as they capture more complexity in their own design, they are becoming less and less comprehensible to thei

  7. Shuttle Global Positioning System (GPS) design study

    Science.gov (United States)

    Nilsen, P. W.

    1979-01-01

    The effects of oscillator noise on Shuttle Global Positioning System (GPS) receiver performance, GPS navigation system self-test, GPS ground transmitter design to augment shuttle navigation, the effect of ionospheric delay modelling on GPS receiver design, and GPS receiver tracking of Shuttle transient maneuvers were investigated.

  8. Designing a System for Observation of Teaching

    Science.gov (United States)

    Washer, Peter

    2006-01-01

    Purpose: The purpose of this paper is to review the literature on observation of teaching in a Higher Education (HE) context with a view to proposing some guidelines for the design and practice of institutional systems to observe teaching. Design/methodology/approach: A literature review and a proposed model for a system of observation of teaching…

  9. System Design of HVDC Project

    Institute of Scientific and Technical Information of China (English)

    Ma Weimin; Yin Weiyang

    2011-01-01

    BackgroundHVDC transmission system is flexible,controllable,economic and environmentfriendly,which has compelling advantages in bulk long-distance power transfer and interconnection of power systems.Since the first HVDC project was put into commercial operation in Gotland in 1954,over 100 HVDC projects have been operating in the world.Currently,there are a number of HVDC projects under being upgraded,constructed or planed in Europe,North America,South America,Africa and Asia.

  10. Optisk Design og Optiske Systemer

    DEFF Research Database (Denmark)

    Dalsgaard, Erik

    1999-01-01

    På basis af geometriske bølgeaberrationer gives et grundlag for dimensionering af optiske systemer. En række numeriske metoder til analyse og optimering, baseret på 4. ordens bølgaberrationer samt endelig raytracing, behandles.......På basis af geometriske bølgeaberrationer gives et grundlag for dimensionering af optiske systemer. En række numeriske metoder til analyse og optimering, baseret på 4. ordens bølgaberrationer samt endelig raytracing, behandles....

  11. Design of Virtual Game System

    OpenAIRE

    Stuchlík, Radek

    2014-01-01

    This document describes an evolutionary development of video game systems, analyse the trends in the development of game consoles and deals with the construction of the virtual game system. The theoretical part describes history of the development of home video game consoles, video game cabinets and the history of the commercial gaming industry itself. Furthermore, the most important names and turning points in the development and construction of these devices, shaping the gaming industry...

  12. Design System for Staff Evaluation

    OpenAIRE

    Dvořáková, Vladislava

    2014-01-01

    The theme of the Bachelor's thesis is the evaluation of the performance appraisal, which is currently a very important activity in many companies and organizations. The first part of the thesis deals with the definition of the concept of performance appraisal, type methods performance appraisal. The practical part deals with the characteristics of the selected entity and the evaluation of the existing system of employee evaluation, which is used in the VZP ČR. A system of for performance ...

  13. Executive system software design and expert system implementation

    Science.gov (United States)

    Allen, Cheryl L.

    1992-01-01

    The topics are presented in viewgraph form and include: software requirements; design layout of the automated assembly system; menu display for automated composite command; expert system features; complete robot arm state diagram and logic; and expert system benefits.

  14. Knowledge Management System Design using Extended Gaia

    CERN Document Server

    Jain, Pooja; 10.5121/ijcnc.2011.3109

    2011-01-01

    An efficient Learning resource centre can be achieved with the help of a network of collaborating, coordinating and communicating software agents. Agent-oriented techniques represent an exciting new means of analysing, designing and building complex software systems. The designing of the interacting agents is done with the help of Gaia, extended for the multiagent systems. Gaia is a methodology for agent-oriented analysis and design proposed by M. Wooldridge [9].

  15. Knowledge Management System Design Using Extended Gaia

    Directory of Open Access Journals (Sweden)

    Pooja Jain

    2011-01-01

    Full Text Available An efficient Learning resource centre can be achieved with the help of a network of collaborating,coordinating and communicating software agents. Agent-oriented techniques represent an exciting newmeans of analysing, designing and building complex software systems. The designing of the interactingagents is done with the help of Gaia, extended for the multiagent systems. Gaia is a methodology foragent-oriented analysis and design proposed by M. Wooldridge [9].

  16. A NEW EXHAUST VENTILATION SYSTEM DESIGN SOFTWARE

    OpenAIRE

    H. Asilian Mahabady; Omidvar, M; A. Rezaee; A. Khavanin; S. B. Mortazavi

    2007-01-01

    A Microsoft Windows based ventilation software package is developed to reduce time-consuming and boring procedure of exhaust ventilation system design. This program Assure accurate and reliable air pollution control related calculations. Herein, package is tentatively named Exhaust Ventilation Design Software which is developed in VB6 programming environment. Most important features of Exhaust Ventilation Design Software that are ignored in formerly developed packages are Collector design and...

  17. Design Technology for Heterogeneous Embedded Systems

    CERN Document Server

    O'Connor, Ian; Piguet, Christian

    2012-01-01

    Designing technology to address the problem of heterogeneous embedded systems, while remaining compatible with standard “More Moore” flows, i.e. capable of handling simultaneously both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today. While the micro-electronics industry has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. This book, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical ...

  18. Hydraulically powered dissimilar teleoperated system controller design

    International Nuclear Information System (INIS)

    This paper will address two issues associated with the implementation of a hydraulically powered dissimilar master-slave teleoperated system. These issues are the overall system control architecture and the design of robust hydraulic servo controllers for the position control problem. Finally, a discussion of overall system performance on an actual teleoperated system will be presented

  19. Designing photovoltaic systems for architectural integration

    OpenAIRE

    Farkas, Klaudia; FRONTINI, Francesco; Maturi, Laura; Munari Probst, Maria Cristina; Roecker, Christian; Scognamiglio, Alessandra

    2013-01-01

    This document is addressed to manufacturers of photovoltaic systems. It describes the main criteria for a successful integration of PV systems in buildings and proposes a methodology for the design of systems specifically conceived for building integration. For each specific sub-technology, it provides a comprehensive set of practical recommendations that should lead to the production of new systems appealing to architects.

  20. Design and Implementation of Instructional Computer Systems.

    Science.gov (United States)

    Graczyk, Sandra L.

    1989-01-01

    Presents an input-process-output (IPO) model that can facilitate the design and implementation of instructional micro and minicomputer systems in school districts. A national survey of school districts with outstanding computer systems is described, a systems approach to develop the model is explained, and evaluation of the system is discussed.…

  1. Strategies for Optimal Design of Structural Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1992-01-01

    Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...... problems are described. Numerical tests indicate that a sequential technique called the bounds iteration method (BIM) is particularly fast and stable....

  2. Design patterns in medical imaging information systems

    Science.gov (United States)

    Hoo, Kent S., Jr.; Wong, Stephen T. C.; Laxer, Kenneth D.; Knowlton, Robert C.; Ching, Wan

    2000-05-01

    The purpose of this paper is to introduce a new and important conceptual framework of software design for the medical imaging community using design patterns. Use cases are created to summarize operational scenarios of clinicians using the system to complete certain tasks such as image segmentation. During design the Unified Modeling Language is used to translate the use cases into modeling diagrams that describe how the system functions. Next, design patterns are applied to build models that describe how software components interoperate to deliver that functionality. The software components are implemented using the Java language, CORBA architecture, and other web technologies. The biomedical image information system is used in epilepsy neurosurgical planning and diagnosis. This article proposes the use of proven software design models for solving medical imaging informatics design problems. Design patterns provide an excellent vehicle to leverage design solutions that have worked in the past to solve the problems we face in building user-friendly, reliable, and efficient information systems. This work introduces this new technology for building increasing complex medical image information systems. The rigorous application of software design techniques is essential in building information systems that are easy to use, rich in functionality, maintainable, reliable, and updatable.

  3. Reengineering the picture archiving and communication system (PACS) process for digital imaging networks PACS.

    Science.gov (United States)

    Horton, M C; Lewis, T E; Kinsey, T V

    1999-05-01

    Prior to June 1997, military picture archiving and communications systems (PACS) were planned, procured, and installed with key decisions on the system, equipment, and even funding sources made through a research and development office called Medical Diagnostic Imaging Systems (MDIS). Beginning in June 1997, the Joint Imaging Technology Project Office (JITPO) initiated a collaborative and consultative process for planning and implementing PACS into military treatment facilities through a new Department of Defense (DoD) contract vehicle called digital imaging networks (DIN)-PACS. The JITPO reengineered this process incorporating multiple organizations and politics. The reengineered PACS process administered through the JITPO transformed the decision process and accountability from a single office to a consultative method that increased end-user knowledge, responsibility, and ownership in PACS. The JITPO continues to provide information and services that assist multiple groups and users in rendering PACS planning and implementation decisions. Local site project managers are involved from the outset and this end-user collaboration has made the sometimes difficult transition to PACS an easier and more acceptable process for all involved. Corporately, this process saved DoD sites millions by having PACS plans developed within the government and proposed to vendors second, and then having vendors respond specifically to those plans. The integrity and efficiency of the process have reduced the opportunity for implementing nonstandard systems while sharing resources and reducing wasted government dollars. This presentation will describe the chronology of changes, encountered obstacles, and lessons learned within the reengineering of the PACS process for DIN-PACS. PMID:10342167

  4. Design of longwall mining system

    Energy Technology Data Exchange (ETDEWEB)

    Curth, E. A.

    1979-01-01

    A premining investigation includes core drill holes, seismic studies, satellite imagery and, where the underground is accessible, bearing strength tests of roof and floor, and residual stress determination. Longwall retreat is the preferred method in the USA. Exceptions are few. The objective of panel design is to maintain ground stability and to provide optimum resource recovery with the most cost-effective panel configuration. Environmental considerations, such as surface utilization, hydrology, oil and gas wells, affect panel location and layout. Roof support selection criteria stem from premining data. Prototype roof supports must satisfy an intensive testing program. Mining equipment, such as cutter loaders, face conveyors and stage loaders, is designed to match the production goal and anticipated face conditions. Coal clearance, power supply, men and supply transportation, communications, and equipment maintenance programs must be commensurate with the extraction potential. Face lighting must comply with mandatory standards. Operational monitoring and analysis include operational data extracted and summarized from shift and monthly records, and from ground control and subsidence observations.

  5. Introduction to thermo-fluids systems design

    CERN Document Server

    Garcia McDonald, André

    2012-01-01

    A fully comprehensive guide to thermal systems design covering fluid dynamics, thermodynamics, heat transfer and thermodynamic power cycles Bridging the gap between the fundamental concepts of fluid mechanics, heat transfer and thermodynamics, and the practical design of thermo-fluids components and systems, this textbook focuses on the design of internal fluid flow systems, coiled heat exchangers and performance analysis of power plant systems. The topics are arranged so that each builds upon the previous chapter to convey to the reader that topics are not stand-alone i

  6. Space systems computer-aided design technology

    Science.gov (United States)

    Garrett, L. B.

    1984-01-01

    The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

  7. Communicating embedded systems software and design

    CERN Document Server

    Jard, Claude

    2013-01-01

    The increased complexity of embedded systems coupled with quick design cycles to accommodate faster time-to-market requires increased system design productivity that involves both model-based design and tool-supported methodologies. Formal methods are mathematically-based techniques and provide a clean framework in which to express requirements and models of the systems, taking into account discrete, stochastic and continuous (timed or hybrid) parameters with increasingly efficient tools. This book deals with these formal methods applied to communicating embedded systems by presenting the

  8. Data base systems in electronic design engineering

    Science.gov (United States)

    Williams, D.

    1980-01-01

    The concepts of an integrated design data base system (DBMS) as it might apply to an electronic design company are discussed. Data elements of documentation, project specifications, project tracking, firmware, software, electronic and mechanical design can be integrated and managed through a single DBMS. Combining the attributes of a DBMS data handler with specialized systems and functional data can provide users with maximum flexibility, reduced redundancy, and increased overall systems performance. Although some system overhead is lost due to redundancy in transitory data, it is believed the combination of the two data types is advisable rather than trying to do all data handling through a single DBMS.

  9. Method and system for the diagnosis of disease using retinal image content and an archive of diagnosed human patient data

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, Kenneth W; Karnowski, Thomas P; Chaum, Edward

    2013-08-06

    A method for diagnosing diseases having retinal manifestations including retinal pathologies includes the steps of providing a CBIR system including an archive of stored digital retinal photography images and diagnosed patient data corresponding to the retinal photography images, the stored images each indexed in a CBIR database using a plurality of feature vectors, the feature vectors corresponding to distinct descriptive characteristics of the stored images. A query image of the retina of a patient is obtained. Using image processing, regions or structures in the query image are identified. The regions or structures are then described using the plurality of feature vectors. At least one relevant stored image from the archive based on similarity to the regions or structures is retrieved, and an eye disease or a disease having retinal manifestations in the patient is diagnosed based on the diagnosed patient data associated with the relevant stored image(s).

  10. Image fusion using MIM software via picture archiving and communication system

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The preliminary studies of the multimodality image registration andfusion were performed using an image fusion software and a picture archiving andcommunication system (PACS) to explore the methodology. Original image voluminaldata were acquired with a CT scanner, MR and dual-head coincidence SPECT, respec-tively. The data sets from all imaging devices were queried, retrieved, transferred andaccessed via DICOM PACS. The image fusion was performed at thc SPECT ICONwork-station, where the MIM (Medical Image Merge) fusion software was installed.The images were created by reslicing original volume on the fly. The image volumeswere aligned by translation and rotation of these view ports with respect to the origi-nal volume orientation. The transparency factor and contrast were adjusted in orderthat both volumes can be visualized in the merged images. The image volume data ofCT, MR and nuclear medicine were transferred, accessed and loaded via PACS suc-cessfully. The perfect fused images of chest CT/18F-FDG and brain MR/SPECT wereobtained. These results showed that image fusion technique using PACS was feasibleand practical. Further experimentation and larger validation studies were needed toexplore the full potential of the clinical use.

  11. Rapid Surface Sampling and Archival Record (RSSAR) system. Final report, October 1995--May 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This report describes the results of Phase 2 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large task of concern to both government and industry. Because of the high cost of hazardous waste disposal, old, contaminated buildings cannot simply be demolished and scrapped. Contaminated and clean materials must be clearly identified and segregated so that the clean material can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. DOE has a number of sites requiring surface characterization. These sites are large, contain very heterogeneous patterns of contamination (requiring high sampling density), and will thus necessitate an enormous number of samples to be taken and analyzed. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmation process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible.

  12. Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

    Science.gov (United States)

    Reed, G; Reed, D H

    1999-05-01

    When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data. PMID:10342194

  13. Resource Storage Management Model For Ensuring Quality Of Service In The Cloud Archive Systems

    Directory of Open Access Journals (Sweden)

    Mariusz Kapanowski

    2014-01-01

    Full Text Available Nowadays, service providers offer a lot of IT services in the public or private cloud. The client can buy various kinds of services like SaaS, PaaS, etc. Recently there was introduced Backup as a Service (BaaS as a variety of SaaS. At the moment there are available several different BaaSes for archiving the data in the cloud, but they provide only a basic level of service quality. In the paper we propose a model which ensures QoS for BaaS and some  methods for management of storage resources aimed at achieving the required SLA. This model introduces a set of parameters responsible for SLA level which can be offered on the basic or higher level of quality. The storage systems (typically HSM, which are distributed between several Data Centres,  are built based on disk arrays, VTLs, and tape libraries. The RSMM model does not assume bandwidth reservation or control, but is rather focused on the management of storage resources.

  14. Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

    Science.gov (United States)

    Reed, G; Reed, D H

    1999-05-01

    When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

  15. Whole transcriptome sequencing enables discovery and analysis of viruses in archived primary central nervous system lymphomas.

    Directory of Open Access Journals (Sweden)

    Christopher DeBoever

    Full Text Available Primary central nervous system lymphomas (PCNSL have a dramatically increased prevalence among persons living with AIDS and are known to be associated with human Epstein Barr virus (EBV infection. Previous work suggests that in some cases, co-infection with other viruses may be important for PCNSL pathogenesis. Viral transcription in tumor samples can be measured using next generation transcriptome sequencing. We demonstrate the ability of transcriptome sequencing to identify viruses, characterize viral expression, and identify viral variants by sequencing four archived AIDS-related PCNSL tissue samples and analyzing raw sequencing reads. EBV was detected in all four PCNSL samples and cytomegalovirus (CMV, JC polyomavirus (JCV, and HIV were also discovered, consistent with clinical diagnoses. CMV was found to express three long non-coding RNAs recently reported as expressed during active infection. Single nucleotide variants were observed in each of the viruses observed and three indels were found in CMV. No viruses were found in several control tumor types including 32 diffuse large B-cell lymphoma samples. This study demonstrates the ability of next generation transcriptome sequencing to accurately identify viruses, including DNA viruses, in solid human cancer tissue samples.

  16. Rapid Surface Sampling and Archival Record (RSSAR) system. Final report, October 1995 - May 1997

    International Nuclear Information System (INIS)

    This report describes the results of Phase 2 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large task of concern to both government and industry. Because of the high cost of hazardous waste disposal, old, contaminated buildings cannot simply be demolished and scrapped. Contaminated and clean materials must be clearly identified and segregated so that the clean material can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. DOE has a number of sites requiring surface characterization. These sites are large, contain very heterogeneous patterns of contamination (requiring high sampling density), and will thus necessitate an enormous number of samples to be taken and analyzed. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmation process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible

  17. Wind Measurement and Archival under the Automated Surface Observing System (ASOS): User Concerns and Opportunity for Improvement.

    Science.gov (United States)

    Powell, Mark D.

    1993-04-01

    The National Weather Service, as a part of its modernization effort, is implementing the Automated Surface Observing System (ASOS). Much discussion has occurred about various aspects of ASOS versus the current system of manual and automated observations. Based upon a study of the ASOS specifications and an informal survey of potential ASOS winddata users, defects of the wind sampling and archival strategy chosen for ASOS are discussed in terms of their impact on various user groups. Limitations include: 1) hourly observation average periods that do not conform to international recommendations for wind reporting made by the World Meteorological Organization, 2) no regular archival of high-resolution data-potentially valuable research data are destroyed if not identified within a 12-h period, and 3) no emergency power for operation in severe weather conditions. An alternative sampling and archiving strategy is recommended that benefits a wider cross section of users, without detracting from aviation and forecast service requirements, at a cost of less than 1% of the original ASOS portion of the weather service modernization budget.

  18. Using Reusable Design Patterns in Disributed Systems%Using Reusable Design Patterns in Distributed Systems

    Institute of Scientific and Technical Information of China (English)

    OU Yan; LI Zhan-bo

    2007-01-01

    The article revealed the software design issues for the object-oriented distributed system. By surveying several existed design issues, the solution of common design issues is conducted which is compromised by design patterns. Each pattern is described according to its functionality which could be valuable for objected-oriented distributed system developer.

  19. The Design of Large Technological Systems

    DEFF Research Database (Denmark)

    Pineda, Andres Felipe Valderrama

    This is a study of the processes of design of large technological systems based on a two-case study: the rapid transit bus system, Transmilenio, in Bogotá, Colombia, and the urban rail system, Metro, in Copenhagen, Denmark. The research focused especially on the process by which designers define...... material scripts during the conception, construction, implementation and operation of large technological systems. The main argument is that designers define scripts in a process in which three parallel developments are at play: first, a reading takes place of the history (past, present, future......) of the arena of development where the system will be constructed. Second, designers define scripts through the delegation of agency, causes and responsibilities to humans and non-humans, a process in which the limits of the system are also defined and enacted. Third, the process of the definition of scripts...

  20. Power Systems Design for Long Duration Ballooning

    Science.gov (United States)

    Stilwell, Bryan; Chuzel, Alain

    2016-01-01

    The Columbia Scientific Balloon Facility has been designing and building high-altitude balloon power systems for over 26 years. With that experience, we have found certain types of PV panels, batteries, and charge controllers that are reliable in stratospheric environments. The ultimate goal is to ensure that power systems will provide power reliably throughout the duration of an LDB flight. The purpose of this presentation is to provide some general guidelines and best practices for power system design.

  1. Laser and photonic systems design and integration

    CERN Document Server

    Nof, Shimon Y; Cheng, Gary J

    2014-01-01

    New, significant scientific discoveries in laser and photonic technologies, systems perspectives, and integrated design approaches can improve even further the impact in critical areas of challenge. Yet this knowledge is dispersed across several disciplines and research arenas. Laser and Photonic Systems: Design and Integration brings together a multidisciplinary group of experts to increase understanding of the ways in which systems perspectives may influence laser and photonic innovations and application integration.By bringing together chapters from leading scientists and technologists, ind

  2. Resilient Control Systems: Next Generation Design Research

    Energy Technology Data Exchange (ETDEWEB)

    Craig Rieger

    2009-05-01

    Since digital control systems were introduced to the market more than 30 years ago, the operational efficiency and stability gained through their use have fueled our migration and ultimate dependence on them for the monitoring and control of critical infrastructure. While these systems have been designed for functionality and reliability, a hostile cyber environment and uncertainties in complex networks and human interactions have placed additional parameters on the design expectations for control systems.

  3. Costing systems design for sustainability

    OpenAIRE

    Mihaela TURTUREA; Radu Dan TURCU

    2013-01-01

    The aim of this article is to present an overall image of the way Accounting responds to nowadays user’s needs in relation to the quantification of the impact companies have towards the environment. Regarding this, there have been analyzed concepts like sustainable development, environmental accounting, environmental costs and there have been presented the main progress towards environmental cost identification and measurement from the perspective of Activity Based Costing system. To provide ...

  4. Preliminary System Design of the SWRL Financial System.

    Science.gov (United States)

    Ikeda, Masumi

    The preliminary system design of the computer-based Southwest Regional Laboratory's (SWRL) Financial System is outlined. The system is designed to produce various management and accounting reports needed to maintain control of SWRL operational and financial activities. Included in the document are descriptions of the various types of system…

  5. Impact of picture archiving communication systems on rates of duplicate imaging: a before-after study

    Directory of Open Access Journals (Sweden)

    Yun Lingsong

    2008-11-01

    Full Text Available Abstract Background Electronic health information systems, such as picture archiving communication systems (PACS, are commonly believed to reduce the need for duplicate testing. However, empirical data to support this belief are not available. Methods Before-after study using administrative claims data from the Ontario Health Insurance Plan to determine whether the introduction of PACS at 10 hospitals in the Thames Valley region of southwestern Ontario, Canada between June 2004 and December 2005 reduced the frequency of duplicate imaging examinations. The imaging modalities studied were: chest and abdominal X-ray; computed tomography of the abdomen/pelvis, head, and chest. The frequency of duplicate testing was examined at 3 different time frames: 7 days, 30 days, and 60 days after a given index test. Results Overall frequencies of duplicate imaging were: 2.7% within 7 days of an index imaging test, 6.7% within 30 days, and 9.8% within 60 days. Comparing the 12 months before and 12 months after PACS, absolute reductions in the frequency of duplicate X-rays using 7-day, 30-day, and 60-day time frames were: 0.2% (P = 0.01, 0.6% (P increases in the frequency of duplicate CT scans after PACS of 0.0% (P = 0.92, 0.5% (P = 0.01, and 0.5% (P = 0.01, respectively. Conclusion The frequency of duplicate imaging is relatively low and we did not find large reductions in duplicate imaging after the introduction of PACS. Independent evaluation of electronic medical systems should be conducted to confirm widely held beliefs of their potential benefits.

  6. Big Data Archives: Replication and synchronizing on a large scale

    Science.gov (United States)

    King, T. A.; Walker, R. J.

    2015-12-01

    Modern data archives provide unique challenges to replication and synchronization because of their large size. We collect more digital information today than any time before and the volume of data collected is continuously increasing. Some of these data are from unique observations, like those from planetary missions that should be preserved for use by future generations. In addition data from NASA missions are considered federal records and must be retained. While the data may be stored on resilient hardware (i.e. RAID systems) they also must be protected from local or regional disasters. Meeting this challenge requires creating multiple copies. This task is complicated by the fact that new data are constantly being added creating what are called "active archives". Having reliable, high performance tools for replicating and synchronizing active archives in a timely fashion is critical to preservation of the data. When archives were smaller using tools like bbcp, rsync and rcp worked fairly well. While these tools are affective they are not optimized for synchronizing big data archives and their poor performance at scale lead us to develop a new tool designed specifically for big data archives. It combines the best features of git, bbcp, rsync and rcp. We call this tool "Mimic" and we discuss the design of the tool, performance comparisons and its use at NASA's Planetary Plasma Interactions (PPI) Node of the Planetary Data System (PDS).

  7. Practical considerations for picture archiving and communications systems over the enterprise network

    OpenAIRE

    Miller, M. Terry; McLaurin, Chris

    1999-01-01

    Network design is a vital element of any PACS implementation. The involvement of Information Systems in PACS planning and implementation is essential to the long-term success of the PACS’s implementation and operation.

  8. Flight Path Recovery System (FPRS) design study

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    The study contained herein presents a design for a Flight Path Recovery System (FPPS) for use in the NURE Program which will be more accurate than systems presently used, provide position location data in digital form suitable for automatic data processing, and provide for flight path recovery in a more economic and operationally suitable manner. The design is based upon the use of presently available hardware and technoloy, and presents little, it any, development risk. In addition, a Flight Test Plan designed to test the FPRS design concept is presented.

  9. Flight Path Recovery System (FPRS) design study

    International Nuclear Information System (INIS)

    The study contained herein presents a design for a Flight Path Recovery System (FPPS) for use in the NURE Program which will be more accurate than systems presently used, provide position location data in digital form suitable for automatic data processing, and provide for flight path recovery in a more economic and operationally suitable manner. The design is based upon the use of presently available hardware and technoloy, and presents little, it any, development risk. In addition, a Flight Test Plan designed to test the FPRS design concept is presented

  10. Plutonium Immobilization Project System Design Description for Can Loading System

    Energy Technology Data Exchange (ETDEWEB)

    Kriikku, E.

    2001-02-15

    The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

  11. Costing systems design for sustainability

    Directory of Open Access Journals (Sweden)

    Mihaela TURTUREA

    2013-10-01

    Full Text Available The aim of this article is to present an overall image of the way Accounting responds to nowadays user’s needs in relation to the quantification of the impact companies have towards the environment. Regarding this, there have been analyzed concepts like sustainable development, environmental accounting, environmental costs and there have been presented the main progress towards environmental cost identification and measurement from the perspective of Activity Based Costing system. To provide an overall image of this concepts, there have been used as research methodology methods the documentation from literature review, analysis, synthesis and comparison.

  12. An Ontology-Based Collaborative Design System

    Science.gov (United States)

    Su, Tieming; Qiu, Xinpeng; Yu, Yunlong

    A collaborative design system architecture based on ontology is proposed. In the architecture, OWL is used to construct global shared ontology and local ontology; both of them are machine-interpretable. The former provides a semantic basis for the communication among designers so as to make the designers share the common understanding of knowledge. The latter which describes knowledge of designer’s own is the basis of design by reasoning. SWRL rule base comprising rules defined based on local ontology is constructed to enhance the reasoning capability of local knowledge base. The designers can complete collaborative design at a higher level based on the local knowledge base and the global shared ontology, which enhances the intelligence of design. Finally, a collaborative design case is presented and analyzed.

  13. Efficient Design Methods for Embedded Communication Systems

    Directory of Open Access Journals (Sweden)

    Holzer M

    2006-01-01

    Full Text Available Nowadays, design of embedded systems is confronted with complex signal processing algorithms and a multitude of computational intensive multimedia applications, while time to product launch has been extremely reduced. Especially in the wireless domain, those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression, and therefore fails to cope with the heterogeneity of modern architectures. Electronic design automation tools exhibit deep gaps in the design flow like high-level characterization of algorithms, floating-point to fixed-point conversion, hardware/software partitioning, and virtual prototyping. This tutorial paper surveys several promising approaches to solve the widespread design problems in this field. An overview over consistent design methodologies that establish a framework for connecting the different design tasks is given. This is followed by a discussion of solutions for the integrated automation of specific design tasks.

  14. Mechatronic Systems Analysis, Design and Implementation

    CERN Document Server

    Boukas, El-Kébir

    2012-01-01

    This book deals with the analysis, the design and the implementation of the mechatronic systems. Classical and modern tools are developed for the analysis and the design for such systems. Robust control, H-Infinity and guaranteed cost control theory are also used for analysis and design of mechatronic systems. Different controller such as state feedback, static output feedback and dynamic output feedback controllers are used to stabilize mechatronic systems. Heuristic algorithms are provided to solve the design of the classical controller such as PID, phase lead, phase lag and phase lead-lag controllers while linear matrix inequalities (LMI) algorithms are provided for finding solutions to the state feedback, static output feedback and dynamic output feedback controllers. The theory presented in the different chapters of the volume is applied to numerical examples to show the usefulness of the theoretical results. Some case studies are also provided to show how the developed concepts apply for real system. Em...

  15. OPTIMUM HEAT STORAGE DESIGN FOR SDHW SYSTEMS

    DEFF Research Database (Denmark)

    Shah, Louise Jivan; Furbo, Simon

    1997-01-01

    Two simulation models have been used to analyse the heat storage design’s influence on the thermal performance of solar domestic hot water (SDHW) systems. One model is especially designed for traditional SDHW systems based on a heat storage design where the solar heat exchanger is a built-in spiral...... of the tank design’s influence on the thermal performance of the systems is possible. By means of the calculations design rules for the two heat storage types are proposed........ The other model is especially designed for low flow SDHW systems based on a mantle tank.The tank design’s influence on the thermal performance of the SDHW systems has been investigated in a way where only one tank parameter has been changed at a time in the calculations. In this way a direct analysis...

  16. Designing Systems for E-Commerce

    Directory of Open Access Journals (Sweden)

    Shona Leitch

    2003-05-01

    Full Text Available Ethics is an important element in all aspects of computing, but proves to be a real problem in the development and delivery of E-Commerce systems. There are many aspects of ethics that can affect E-Commerce systems, but often research is focused on the ethics after the E-Commerce system has been implemented, focusing on issues such as trust, privacy and disclosure. This paper will discuss how ethical matters can affect the design of E-Commerce systems and how a framework designed for E-Commerce can be used to create and deliver effective, ethical E-Commerce systems.

  17. Designing an oil spill information management system

    Energy Technology Data Exchange (ETDEWEB)

    Douligeris, C.; Collins, J.; Iakovou, E.; Sun, P.; Riggs, K.R. [Univ. of Miami, Coral Gables, FL (United States)

    1995-12-31

    This paper presents the architectural design of OSIMS, an Oil Spill Information Management System, which is an integrated information management tool that consists of an object-relational database management system, an adaptive decision support system, an advanced visualization system (AVS) and a geographic information system (GIS). OSIMS will handle large and diverse databases of environmental, ecological, geographical, engineering, and regulatory information and will be used for risk analysis and contingency planning.

  18. Design Methodologies for Secure Embedded Systems

    CERN Document Server

    Biedermann, Alexander

    2011-01-01

    Embedded systems have been almost invisibly pervading our daily lives for several decades. They facilitate smooth operations in avionics, automotive electronics, or telecommunication. New problems arise by the increasing employment, interconnection, and communication of embedded systems in heterogeneous environments: How secure are these embedded systems against attacks or breakdowns? Therefore, how can embedded systems be designed to be more secure? And how can embedded systems autonomically react to threats? Facing these questions, Sorin A. Huss is significantly involved in the exploration o

  19. Analyzing Archival Intelligence: A Collaboration between Library Instruction and Archives

    Science.gov (United States)

    Hensley, Merinda Kaye; Murphy, Benjamin P.; Swain, Ellen D.

    2014-01-01

    Although recent archival scholarship promotes the use of primary sources for developing students' analytical research skills, few studies focus on standards or protocols for teaching or assessing archival instruction. Librarians have designed and tested standards and learning assessment strategies for library instruction, and archivists would do…

  20. Design of supervisory control system for FEL

    International Nuclear Information System (INIS)

    A supervisory control system for RF power conditioning of LINAC and measurement of transmission through undulator has been designed, developed and commissioned as a part of Compact Ultrafast Terahertz Free Electron Laser (CUTE-FEL) project at RRCAT. The present setup consists of Pulsed thermionic gun, Linear Accelerator (linac), Beam transport line (BTL) and undulator assembly, which form Free Electron Laser (FEL) cavity. To operate these subsystems, various power supplies are required for magnet, thermionic gun, etc. and RF system to excite linac. There are various ancillary systems, which takes care of vacuum in linac and BTL, gas pressure in wave-guide assembly, radiation monitors etc. While in operation system generates harmful radiation, hence operator can not enter the FEL hall. Thus it was important to design a control system which can be operated from remote location. A distributed control system based on Master Slave architecture has been designed. A Master PC provides a Man Machine Interface (MMI) for machine operation from a remote control room. The slave controllers with RS-485 serial interface were designed. These slave controllers were connected to Master PC in a star topology with two wire RS-485 bus. Various safety features have been incorporated in the software as well as hardware for safe operation of the system. This paper describes hardware design aspects of the control system. The hardware and firmware design of the slave controller based on MCS-51 family microcontroller is discussed. (author)

  1. Planning and design of information systems

    CERN Document Server

    Blokdijk, André

    1991-01-01

    Planning and Design of Information Systems provides a theoretical base and a practical method of executing the planning of computerized information systems, and the planning and design of individual applications. The book is organized into five parts, covering the non-technical and nonimplementational part of information systems planning, design, and development. Part I gives the theoretical base for the subsequent parts of the book. It discusses modeling, techniques, notations, boundaries, quality issues and aspects, and decomposition techniques and problems. Part II discusses the needs, prob

  2. Radio frequency system architecture and design

    CERN Document Server

    Rogers, John W M; Marsland, Ian

    2013-01-01

    Communication devices such as smart phones, GPS systems, and Bluetooth, are now part of our daily lives more than ever before. As our communication equipment becomes more sophisticated, so do the radios and other hardware required to enable that technology. Common radio architectures are required to make this technology work seamlessly.This resource describes practical aspects of radio frequency communications systems design, bridging the gap between system-level design considerations and circuit-level design specifications. Industry experts not only provide detailed calculations and theory to

  3. ICI optical data storage tape: An archival mass storage media

    Science.gov (United States)

    Ruddick, Andrew J.

    1993-01-01

    At the 1991 Conference on Mass Storage Systems and Technologies, ICI Imagedata presented a paper which introduced ICI Optical Data Storage Tape. This paper placed specific emphasis on the media characteristics and initial data was presented which illustrated the archival stability of the media. More exhaustive analysis that was carried out on the chemical stability of the media is covered. Equally important, it also addresses archive management issues associated with, for example, the benefits of reduced rewind requirements to accommodate tape relaxation effects that result from careful tribology control in ICI Optical Tape media. ICI Optical Tape media was designed to meet the most demanding requirements of archival mass storage. It is envisaged that the volumetric data capacity, long term stability and low maintenance characteristics demonstrated will have major benefits in increasing reliability and reducing the costs associated with archival storage of large data volumes.

  4. The CADSS design automation system. [computerized design language for small digital systems

    Science.gov (United States)

    Franke, E. A.

    1973-01-01

    This research was designed to implement and extend a previously defined design automation system for the design of small digital structures. A description is included of the higher level language developed to describe systems as a sequence of register transfer operations. The system simulator which is used to determine if the original description is correct is also discussed. The design automation system produces tables describing the state transistions of the system and the operation of all registers. In addition all Boolean equations specifying system operation are minimized and converted to NAND gate structures. Suggestions for further extensions to the system are also given.

  5. USE OF A SYSTEM DESIGN ULTRAACUSTIC WELDING

    Directory of Open Access Journals (Sweden)

    Gheorghe AMZA

    2010-06-01

    Full Text Available This article presents elements of a computer modeling system and ultraacustic using analyzing finite element method used in its design. With the experimental results obtained for a system used for welding ultraacustic determine variation curve aplitudinii particle velocity along the system.

  6. Thinking Tracks for Integrated Systems Design

    NARCIS (Netherlands)

    Bonnema, G.M.; Denkena, B.; Gausemeijer, J.; Scholz-Reiter, B.

    2012-01-01

    The paper investigates systems thinking and systems engineering. After a short literature review, the paper presents, as a means for systems thinking, twelve thinking tracks. The tracks can be used as creativity starter, checklist, and as means to investigate effects of design decisions taken early

  7. Information management systems improve advanced plant design

    Energy Technology Data Exchange (ETDEWEB)

    Turk, R.S.; Serafin, S.A.; Leckey, J.B. [ABB-Combustion Engineering, Inc., Windsor, CT (United States); Morgan, J.S. [Duke Engineering & Services, Charlotte, NC (United States)

    1994-12-31

    Computer-aided engineering tools are proving invaluable in both the design and operation of nuclear power plants. ABB Combustion Engineering`s Advanced Light Water Reactor (ALWR) features a computerized Information Management System (IMS) as an integral part of the design. The System 80+ IMS represents the most powerful information management tool for Nuclear Power Plants commercially available today. Developed by Duke Power Company specifically for use by nuclear power plant owner operators, the IMS consists of appropriate hardware and software to manage and control information flow for all plant related work or tasks in a systematic, consistent, coordinated and informative manner. A significant feature of this IMS is that it is primarily based on plant data. The principal design tool, PASCE (Plant Application and Systems from Combustion Engineering), is comprised of intelligent databases that describe the design and from which accurate plant drawings are created. Additionally the IMS includes, at its hub, a relational database management system and an associated document management system. During the design phase, the IMS captures all design information in a database as it is generated. Interrelated data are automatically checked for consistency. Engineers and managers from various disciplines are automatically and simultaneously notified of pending changes. The 3-D model automatically checks for interferences and can be used to simulate the removal and replacement of equipment. Thus any potential difficulties can be corrected in the design phase. Document and data search times are greatly reduced by the querying capabilities of the system.

  8. User Acceptance of Picture Archiving and Communication System in the Emergency Department

    Science.gov (United States)

    Goodarzi, Hassan; Khatami, Seyed-Masoud; Javadzadeh, Hammidreza; Mahmoudi, Sadrollah; Khajehpour, Hojjatollah; Heidari, Soleiman; Khodaparast, Morteza; Ebrahimi, Ali; Rasouli, Hamidreza; Ghane, Mohammadreza; Faraji, Mehrdad; Hassanpour, Kasra

    2016-01-01

    Background Picture archiving and communication system (PACS) has allowed the medical images to be transmitted, stored, retrieved, and displayed in different locations of a hospital or health system. Using PACS in the emergency department will eventually result in improved efficiency and patient care. In spite of the abundant benefits of employing PACS, there are some challenges in implementing this technology like users’ resistance to accept the technology, which has a critical role in PACS success. Objectives In this study, we will assess and compare user acceptance of PACS in the emergency departments of three different hospitals and investigate the effect of socio-demographic factors on this acceptance. Materials and Methods A variant of technology acceptance model (TAM) has been used in order to measure the acceptance level of PACS in the emergency department of three educational hospitals in Iran. A previously used questionnaire was validated and utilized to collect the study data. A stepwise multiple regression model was used to predict factors influencing acceptance score as the dependent variable. Results Mean age of participants was 32.9 years (standard deviation [SD] = 6.08). Participants with the specialty degree got a higher acceptance score than the three other groups (Mean ± SD = 4.17 ± 0.20). Age, gender, degree of PACS usage and participant’s occupation (profession) did not influence the acceptance score. In our multiple regression model, all three variables of perceived usefulness (PU), perceived ease of use (PEU) and the effect of PACS (change) had a significant effect in the prediction of acceptance. The most influencing factor was change with the beta of 0.22 (P value change are factors influencing PACS acceptance. Our study can be used as an evidence of PACS acceptance in emergency wards.

  9. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    International Nuclear Information System (INIS)

    The purpose of this document is to develop preliminary high-level functional and physical control system architectures for the proposed subsurface repository at Yucca Mountain. This document outlines overall control system concepts that encompass and integrate the many diverse systems being considered for use within the subsurface repository. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The subsurface repository design will be composed of a series of diverse systems that will be integrated to accomplish a set of overall functions and objectives. The subsurface repository contains several Instrumentation and Control (I andC) related systems including: waste emplacement systems, ventilation systems, communication systems, radiation monitoring systems, rail transportation systems, ground control monitoring systems, utility monitoring systems (electrical, lighting, water, compressed air, etc.), fire detection and protection systems, retrieval systems, and performance confirmation systems. Each of these systems involve some level of I andC and will typically be integrated over a data communication network. The subsurface I andC systems will also integrate with multiple surface-based site-wide systems such as emergency response, health physics, security and safeguards, communications, utilities and others. The scope and primary objectives of this analysis are to: (1) Identify preliminary system level functions and interface needs (Presented in the functional diagrams in Section 7.2). (2) Examine the overall system complexity and determine how and on what levels these control systems will be controlled and integrated (Presented in Section 7.2). (3) Develop a preliminary subsurface facility-wide design for an overall control system architecture, and depict this design by a series of control system functional block diagrams (Presented in Section 7.2). (4) Develop a series of physical architectures

  10. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  11. Evaluation of Picture Archiving and Communication System (Pacs As A Process Improvement Sample (Sivas Numune Hospital Application

    Directory of Open Access Journals (Sweden)

    Ali Rıza İnce

    2013-09-01

    Full Text Available It is a realitythatthefirmsproducinggoods or services frequentlybenefited process improvementand similartechniques toachieve their objectives In today'scompetitive environment.Beingprocess-orientedmeans to give weight to the creation of quality but not to the control of quality. In this sense, process improvement is seen as an approach of Total Quality Management targeted. Hospital informationsystems are computer systems that collect andarchive all orthe majority of the hospitaldatafor use inthe assessment.It isa major problem that storage of visualdatawithout lossanddamage and also the being availableof these data as soon as possiblein this system.System that calledPACShas been developedto overcome this problem.PACS is an archiving system that archive the visual dataobtained fromimaging systems in different unitsin a spaceand, allows the transfer of these data to usersat different points when needed.In this study,efficiency of PACS asa process improvementtechniquewas examined by the application ofahospital.It is concluded that the system providea positive contributionto customers and hospitalas an example ofan importantprocess improvement at the evaluationof the results and implementation of the system.

  12. Design concepts for KSTAR plasma control system

    International Nuclear Information System (INIS)

    We present design concepts and features of the plasma control system (PCS) in Korea Superconducting Tokamak Advanced Research (KSTAR). A design structure of the PCS is proposed as an effort to achieve research objectives of the KSTAR project. The PCS architecture is characterized by the real-time data communication using reflective-memory network, the hierarchical organization of dedicated controllers, and the integrated generation of actuator signals. Discussions are made of the functions and present design choices of the KSTAR PCS

  13. System design description PFP thermal stabilization

    International Nuclear Information System (INIS)

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: functional design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides

  14. Solar heating system final design package

    Science.gov (United States)

    1979-01-01

    The system is composed of a warm air collector, a logic control unit and a universal switching and transport unit. The collector was originally conceived and designed as an integrated roof/wall system and therefore provides a dual function in the structure. The collector serves both as a solar energy conversion system and as a structural weather resistant skin. The control unit provides totally automatic control over the operation of the system. It receives input data from sensor probes in collectors, storage and living space. The logic was designed so as to make maximum use of solar energy and minimize use of conventional energy. The transport and switching unit is a high-efficiency air-handling system equipped with gear motor valves that respond to outputs from the control system. The fan unit was designed for maximum durability and efficiency in operation, and has permanently lubricated ball bearings and excellent air-handling efficiency.

  15. Design Flaws and Service System Breakdowns: Learning from Systems Thinking

    Directory of Open Access Journals (Sweden)

    David Ing

    2014-12-01

    Full Text Available In what ways might systems thinking be helpful to designers?  In the 21st century, the types of project with which designers have become engaged has expanded to include service systems.  Service systems are typically composites of mechanisms, organisms, human beings and ecologies.  Systems thinking is a perspective with theories, methods and practices that enables transcending disciplinary boundaries.  Application of systems thinking in designing a service system can aid in surfacing potential flaws and/or anticipating future breakdowns in functions, structures and/or processes. Designers and systems thinkers should work together to improve the nature of service systems.  As a starter set into these conversations, seven conditions are proposed as a starting context.  These conditions are presented neither as rigourously defined nor as exhaustive, but as an entry point into future joint engagement.

  16. DESIGN MANUAL: FINE PORE AERATION SYSTEMS

    Science.gov (United States)

    This manual presents the best current practices for selecting, designing, operating, maintaining, and controlling fine pore aeration systems used in the treatment of municipal wastewater. It was prepared by the American Society of Civil Engineers Committee on Oxygen Transfer unde...

  17. DESIGN INFORMATION ON FINE PORE AERATION SYSTEMS

    Science.gov (United States)

    Field studies were conducted over several years at municipal wastewater treatment plants employing line pore diffused aeration systems. These studies were designed to produce reliable information on the performance and operational requirements of fine pore devices under process ...

  18. Design information for solar-heating systems

    Science.gov (United States)

    1979-01-01

    Report contains preliminary design information for two solar-heating and hot water systems presently under development. Information includes quality control data, special tooling specifications, hazard analysis, and preliminary training program for installation contractors.

  19. Modular solar-heating system - design package

    Science.gov (United States)

    Sinton, D. S.

    1979-01-01

    Compilation contains design, performance, and hardware specifications in sufficient detail to fabricate or procure materials and install, operate, and maintain complete modular solar heating and hot water system for single family size dwellings.

  20. Design criteria for SW-205 capillary system

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, W.J.

    1989-04-01

    This design criteria covers the converting of the SW-250 Capillary System from fumehood manual operation to sealed glovebox automated operation. The design criteria contains general guidelines and includes drawings reflecting a similar installation at another site. Topics include purpose and physical description, architectural-engineering requirements, reference document, electrical, fire protection, occupational safety and health, quality assurance, and security.

  1. The T-Ruby design system

    DEFF Research Database (Denmark)

    Sharp, Robin; Rasmussen, Ole

    1995-01-01

    This paper describes the T-Ruby system for designing VLSI circuits, starting from formal specifications in which they are described in terms of relational abstractions of their behaviour. The design process involves correctness-preserving transformations based on proved equivalences between...

  2. Design techniques for mutlivariable flight control systems

    Science.gov (United States)

    1981-01-01

    Techniques which address the multi-input closely coupled nature of advanced flight control applications and digital implementation issues are described and illustrated through flight control examples. The techniques described seek to exploit the advantages of traditional techniques in treating conventional feedback control design specifications and the simplicity of modern approaches for multivariable control system design.

  3. Design and Simulation of MEMS Enabled Systems

    Science.gov (United States)

    da Silva, Mark

    2001-03-01

    Over the past two decades considerable progress in microsystems (MEMS) fabrication technologies has been made resulting in a variety of commercially successful devices. Most of these devices have required application specific fabrication steps, which must be developed, and the lack of proper design tools often resulted in repeated prototyping that was expensive and time consuming. Further development of MEMS enabled commercial products and reduction of the time to market requires implementation of a concurrent design methodology through better design tools and standardization of the fabrication processes. The cross-disciplinary nature of MEMS-Enabled Systems necessitates designers with different backgrounds to work together in understanding the effects of one sub-system on another and this requires a top-down approach to integrated system design. Design tools that can facilitate this communication and reduce the need for excessive prototype fabrication and test iterations and significantly reduce cost and time-to-market are vitally important. The main focus of this article is to describe the top-down design methodology and and ongoing research on tools that facilitate concurrent design of MEMS enabled systems.

  4. Office Automation System and Its Security Design

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Analyzing the specialties of OAS network based on Internet/Intranet, aiming to these specialties design the OAS network's system structure. Analyzing the security threats that the OAS network faces to and the possible attacking means. This paper puts forward five security tactics and security design in detail, and a sensible conclusion is proposed at last.

  5. Structured data management--the design and implementation of a web-based video archive prototype.

    Science.gov (United States)

    Zou, H; Lu, Q C; Durack, J C; Chao, C; Strasberg, H R; Zhang, Y; Tsai, M; Melmon, K; Hahn, J S

    2001-01-01

    In response to the lack of readily available multimedia rich medical knowledge sources to support medical education and patient care, we designed and implemented a web-based video publishing platform. In order to promote the development of high-quality, up-to-date educational content, we have devised a scalable structure that allows online submissions and continuous updating of video and accompanying textual descriptions. Our goal is to enable experts in varied medical domains to collaborate in the construction of a video library using an intuitive web-based interface. Neurologists at Stanford built a well-annotated neurology video collection that initially emphasized childhood and adult movement disorders. The collection may be accessed either as a stand-alone resource or as part of the Stanford Skolar MD, an integrated online medical knowledge provider. This manuscript discusses the design framework and implementation details of structured media content development. We present examples illustrating media data collection, content indexing using UMLS concepts, media storage, and web presentation. PMID:11825293

  6. Design Concept Evaluation Using System Throughput Model

    International Nuclear Information System (INIS)

    The U.S. Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is currently developing the technical bases to support the submittal of a license application for construction of a geologic repository at Yucca Mountain, Nevada to the U.S. Nuclear Regulatory Commission. The Office of Repository Development (ORD) is responsible for developing the design of the proposed repository surface facilities for the handling of spent nuclear fuel and high level nuclear waste. Preliminary design activities are underway to sufficiently develop the repository surface facilities design for inclusion in the license application. The design continues to evolve to meet mission needs and to satisfy both regulatory and program requirements. A system engineering approach is being used in the design process since the proposed repository facilities are dynamically linked by a series of sub-systems and complex operations. In addition, the proposed repository facility is a major system element of the overall waste management process being developed by the OCRWM. Such an approach includes iterative probabilistic dynamic simulation as an integral part of the design evolution process. A dynamic simulation tool helps to determine if: (1) the mission and design requirements are complete, robust, and well integrated; (2) the design solutions under development meet the design requirements and mission goals; (3) opportunities exist where the system can be improved and/or optimized; and (4) proposed changes to the mission, and design requirements have a positive or negative impact on overall system performance and if design changes may be necessary to satisfy these changes. This paper will discuss the type of simulation employed to model the waste handling operations. It will then discuss the process being used to develop the Yucca Mountain surface facilities model. The latest simulation model and the results of the simulation and how the data were used in the design

  7. Technical Design of Flexible Sustainable Energy Systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid.......The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid....

  8. Preliminary conceptual design of DEMO EC system

    Energy Technology Data Exchange (ETDEWEB)

    Garavaglia, S., E-mail: garavaglia@ifp.cnr.it; Bin, W.; Bruschi, A.; Granucci, G.; Moro, A.; Rispoli, N. [Institute of Plasma Physics “P.Caldirola”, National Research Council of Italy, Milan (Italy); Grossetti, G.; Strauss, D. [IAM-AWP, Kaiserstr. 12, D-76131 Karlsruhe (Germany); Jelonnek, J. [IHM, KIT, Kaiserstr. 12, D-76131 Karlsruhe (Germany); Tran, Q. M. [CRPP, EPFL, EURATOM Association, CH-1015 Lausanne (Switzerland); Franke, T. [EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching (Germany); Max-Planck-Institut für Plasmaphysik, Garching (Germany)

    2015-12-10

    In the framework of EUROfusion Consortium the Work Package Heating and Current Drive addresses the engineering design and R&D for the electron cyclotron, ion cyclotron and neutral beam systems. This paper reports the activities performed in 2014, focusing on the work done regarding the input for the conceptual design of the EC system, particularly for the gyrotron, the transmission line and the launchers.

  9. Designing a mobile academic peer support system

    OpenAIRE

    AlSugair, Balsam; Hopkins, Gail; FitzGerald, Elizabeth; Brailsford, Tim

    2012-01-01

    In this paper, we discuss work in progress into the design of a mobile academic peer support system that enables 11-to-14 year old children to request and provide academic help to each other. Our proposed system was designed based on background research into the areas of peer learning, child development, help-seeking and academic motivation. Several methods, such as focus groups, interviews and Wizard of Oz, were used during the requirements gathering and initial testing stages. The proposed ...

  10. Designing Systems for E-Commerce

    OpenAIRE

    Shona Leitch; Matthew Warren

    2003-01-01

    Ethics is an important element in all aspects of computing, but proves to be a real problem in the development and delivery of E-Commerce systems. There are many aspects of ethics that can affect E-Commerce systems, but often research is focused on the ethics after the E-Commerce system has been implemented, focusing on issues such as trust, privacy and disclosure. This paper will discuss how ethical matters can affect the design of E-Commerce systems and how a framework designed for E-Com...

  11. Heliostat design for the daylighting system.

    Science.gov (United States)

    Chang, Chih-Hung; Hsiso, Horng-Ching; Chang, Cheng-Ming; Wang, Chen-You; Lin, Tzung-Han; Chen, Yi-Yung; Lai, Yi-Lung; Yen, Cho-Jung; Chen, Kuan-Yu; Whang, Allen Jong-Woei

    2014-10-10

    The daylighting system is designed to guide sunlight into buildings for illumination. It has the best illumination performance when sunlight vertically impinges on the collector of the daylighting system, while it has low performance when sunlight impinges obliquely. To overcome the problem, this paper investigates the design of a heliostat that reflects sunlight vertically onto a daylighting system. This study proposes a 3×3 mirror matrix heliostat, which is different from the traditional heliostat with one single mirror. With the heliostat, the system efficiency increases as high as 3.32 times.

  12. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Randle

    2000-01-07

    The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I&C) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I&C and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I&C systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I&C systems, the subsurface repository design also contains systems related to voice and video communications. The components for each of these systems will be distributed and linked over voice and video communication networks throughout the subsurface facility. The scope and primary objectives of this design analysis are to: (1) Identify preliminary system-level functions and interfaces (Section 6.2). (2) Examine the overall system complexity and determine how and on what levels the engineered process systems will be monitored, controlled, and

  13. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    International Nuclear Information System (INIS)

    The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I andC) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I andC and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I andC systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I andC systems, the subsurface repository design also contains systems related to voice and video communications. The components for each of these systems will be distributed and linked over voice and video communication networks throughout the subsurface facility. The scope and primary objectives of this design analysis are to: (1) Identify preliminary system-level functions and interfaces (Section 6.2). (2) Examine the overall system complexity and determine how and on what levels the engineered process systems will be monitored

  14. Waste receiving and processing plant control system; system design description

    International Nuclear Information System (INIS)

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

  15. Waste receiving and processing plant control system; system design description

    Energy Technology Data Exchange (ETDEWEB)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  16. Thinking Tracks for Integrated Systems Design

    OpenAIRE

    Bonnema, G.M.; Denkena, B.; Gausemeijer, J.; Scholz-Reiter, B.

    2012-01-01

    The paper investigates systems thinking and systems engineering. After a short literature review, the paper presents, as a means for systems thinking, twelve thinking tracks. The tracks can be used as creativity starter, checklist, and as means to investigate effects of design decisions taken early in the process. Tracks include thinking about time, risk and safety, and different types of life-cycles. The thinking tracks are based on literature, teaching experience and practice as a system de...

  17. Simulation based design of automotive systems

    OpenAIRE

    Schiehlen, Werner

    1993-01-01

    The design of automotive systems using simulation tools features cost reduction and quality enhancement. This paper presents two basic approaches. The rust approach deals with the application of CAD data bases to the evaluation of input data for multibody system formalisms, most adequate for automotive system modeling. An object oriented data model for multibody systems is presented. The second approach covers the development of an integrated simulation tool for automotive vehicles and the co...

  18. Tore Supra. Basic design Tokamak system

    International Nuclear Information System (INIS)

    This document describes the basic design for the main components of the Tokamak system of Tora Supra. As such, it focuses on the engineering problems, and refers to last year report on Tora Supra (EUR-CEA-1021) for objectives and experimental programme of the apparatus on one hand, and for qualifying tests of the main technical solutions on the other hand. Superconducting toroidal field coil system, vacuum vessels and radiation shields, poloidal field system and cryogenic system are described

  19. Collectives and the design of complex systems

    CERN Document Server

    Wolpert, David

    2004-01-01

    Increasingly powerful computers are making possible distributed systems comprised of many adaptive and self-motivated computational agents. Such systems, when distinguished by system-level performance criteria, are known as "collectives." Collectives and the Design of Complex Systems lays the foundation for a science of collectives and describes how to design them for optimal performance. An introductory survey chapter is followed by descriptions of information-processing problems that can only be solved by the joint actions of large communities of computers, each running its own complex, decentralized machine-learning algorithm. Subsequent chapters analyze the dynamics and structures of collectives, as well as address economic, model-free, and control-theory approaches to designing complex systems. The work assumes a modest understanding of basic statistics and calculus. Topics and Features: Introduces the burgeoning science of collectives and its practical applications in a single useful volume Combines ap...

  20. Contextual design defining customer-centered systems

    CERN Document Server

    Beyer, Hugh

    1997-01-01

    This book introduces a customer-centered approach to business by showing how data gathered from people while they work can drive the definition of a product or process while supporting the needs of teams and their organizations. This is a practical, hands-on guide for anyone trying to design systems that reflect the way customers want to do their work. The authors developed Contextual Design, the method discussed here, through their work with teams struggling to design products and internal systems. In this book, you'll find the underlying principles of the method and how to apply them to diff

  1. Theory and design of CNC systems

    CERN Document Server

    Suh, Suk-Hwan; Chung, Dae-Hyuk; Stroud, Ian

    2008-01-01

    Computer Numerical Control (CNC) controllers are high value-added products counting for over 30% of the price of machine tools. The development of CNC technology depends on the integration of technologies from many different industries, and requires strategic long-term support. a oeTheory and Design of CNC Systemsa covers the elements of control, the design of control systems, and modern open-architecture control systems. Topics covered include Numerical Control Kernel (NCK) design of CNC, Programmable Logic Control (PLC), and the Man-Machine Interface (MMI), as well as the major modules for t

  2. Microprocessor system design a practical introduction

    CERN Document Server

    Spinks, Michael J

    2013-01-01

    Microprocessor System Design: A Practical Introduction describes the concepts and techniques incorporated into the design of electronic circuits, particularly microprocessor boards and their peripherals. The book reviews the basic building blocks of the electronic systems composed of digital (logic levels, gate output circuitry) and analog components (resistors, capacitors, diodes, transistors). The text also describes operational amplifiers (op-amp) that use a negative feedback technique to improve the parameters of the op-amp. The design engineer can use programmable array logic (PAL) to rep

  3. SEPI an expert system for plant design

    International Nuclear Information System (INIS)

    The availability and suitability of technological information is of great importance in every kind of design task, especially when safety and reliability considerations are involved. In this paper an ''expert system for plant design'' (SEPI), is presented, together with its first application to nuclear back-end plants. This system is available on ENEA computer network. It is thought to be used both to collect know-how developed in the field and to assist unskilled designers during selection, evaluation and dimensioning tasks. It attemps to reproduce the normal way of ''reasoning'' and acting, and provides some graphic facilities

  4. A Model-Based Expert System For Digital Systems Design

    Science.gov (United States)

    Wu, J. G.; Ho, W. P. C.; Hu, Y. H.; Yun, D. Y. Y.; Parng, T. M.

    1987-05-01

    In this paper, we present a model-based expert system for automatic digital systems design. The goal of digital systems design is to generate a workable and efficient design from high level specifications. The formalization of the design process is a necessity for building an efficient automatic CAD system. Our approach combines model-based, heuristic best-first search, and meta-planning techniques from AI to facilitate the design process. The design process is decomposed into three subprocesses. First, the high-level behavioral specifications are translated into sequences of primitive behavioral operations. Next, primitive operations are grouped to form intermediate-level behavioral functions. Finally, structural function modules are selected to implement these functions. Using model-based reasoning on the primitive behavioral operations level extends the solution space considered in design and provides more opportunity for minimization. Heuristic best-first search and meta-planning tech-niques control the decision-making in the latter two subprocesses to optimize the final design. They also facilitate system maintenance by separating design strategy from design knowledge.

  5. HyperArchiver: an EPICS archiver prototype based on Hypertable

    International Nuclear Information System (INIS)

    This work started in the context of NSLS2 project at Brookhaven National Laboratory. The NSLS2 control system foresees a very high number of PV variables and has strict requirements in terms of archiving/retrieving rate: our goal was to store 10 K PV/sec and retrieve 4 K PV/sec for a group of 4 signals. The HyperArchiver is an EPICS Archiver implementation engined by Hypertable, an open source database whose internal architecture is derived from Google's Big Table. We discuss the performance of HyperArchiver and present the results of some comparative tests. (authors)

  6. SIMS Prototype System 4: design data brochure

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    A pre-package prototype unit is described having domestic hot water and room solar heating capability that uses air as the collector fluid. This system is designed to be used with a small single-family dwelling where a roof mounted collector array is not feasible. The prototype unit is an assembly containing 203 square feet of effective collector surface with 113 cubic feet of rock storage. The design of structure and storage is modular, which permits expansion and reduction of the collector array and storage bed in 68 square feet and 37 cubic feet increments respectively. The system is designed to be transportable. This permitted assembly and certification testing in one area and installation in another area without tear down and reassembly. Design, installation, operation, performance and maintenance of this system are described.

  7. Design of a recumbent seating system

    Science.gov (United States)

    Croyle, Scott; Delarosa, Jose; George, Daren; Hinkle, Cathy; Karas, Stephen

    1993-01-01

    Future space shuttle missions presented by NASA might require the shuttle to rendezvous with the Russian space station Mir for the purpose of transporting astronauts back to earth. Due to the atrophied state of these astronauts, a special seating system must be designed for their transportation. The main functions of this seating system are to support and restrain the astronauts during normal reentry flight and to dampen some of the loading that might occur in a crash situation. Through research, the design team developed many concept variants for these functional requirements. By evaluating each variant, the concepts were eliminated until the four most attractive designs remained. The team used a decision matrix to determine the best concept to carry through embodiment. This concept involved using struts for support during reentry flight and a spring damper/shock absorber system to dampen crash landing loads. The embodiment design process consisted of defining the layout of each of the main functional components, specifically, the seat structure and the strut structure. Through the use of MCS/pal two, the design was refined until it could handle all required loads and dampen to the forces specified. The auxiliary function carriers were then considered. Following the design of these components, the complete final layout could be determined. It is concluded that the final design meets all specifications outlined in the conceptual design. The main advantages of this design are its low weight, simplicity, and large amount of function sharing between different components. The disassembly of this design could potentially present a problem because of time and size constraints involved. Overall, this design meets or exceeds all functional requirements.

  8. A Virtual Microscopy System to Scan, Evaluate and Archive Biomarker Enhanced Cervical Cytology Slides

    Directory of Open Access Journals (Sweden)

    Niels Grabe

    2010-01-01

    Full Text Available Background: Although cytological screening for cervical precancers has led to a reduction of cervical cancer incidence worldwide it is a subjective and variable method with low single-test sensitivity. New biomarkers like p16 that specifically highlight abnormal cervical cells can improve cytology performance. Virtual microscopy offers an ideal platform for assisted evaluation and archiving of biomarker-stained slides.

  9. Conceptual design of integrated safeguards systems

    International Nuclear Information System (INIS)

    The Los Alamos Scientific Laboratory (LASL) is currently involved in the conceptual design of safeguards for generic facilities in the back-end of the nuclear fuel cycle (spent-fuel reprocessing, plutonium nitrate-to-oxide conversion, mixed-oxide fuel fabrication, plutonium scrap recovery, and waste handling). These studies are first steps aimed at eventually providing detailed designs of integrated safeguards systems to guide safeguards-related facility construction and/or modification. The purpose of this presentation is to describe the conceptual design process in terms of its definition, a systematic procedure for its implementation, some of the tools required, and an example of the results of a conceptual design. The value of conceptual design and its relationship to other facets of the complete facility design process are also discussed

  10. Mechatronic System Design Course for Undergraduate Programmes

    Science.gov (United States)

    Saleem, A.; Tutunji, T.; Al-Sharif, L.

    2011-01-01

    Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching…

  11. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-mei; Wang, Xin-jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  12. Biometric systems technology, design and performance evaluation

    CERN Document Server

    Wayman, James; Maltoni, Davide

    2005-01-01

    A reference book for anyone involved in the design, management or implementation of biometric systems, and provides all the information needed to a build reliable system. It focuses on the four most widely used types of biometric technology - speech, fingerprint, iris and face recognition.

  13. Solar-heating system design data brochure

    Science.gov (United States)

    1979-01-01

    Report details design and performance specifications of complete system for space and hot-water heating that is assembled from commercially available components. System can meet need of single family dwelling having approximately 1,200 sq ft of floor area and can be scaled to requirements of larger or smaller installations.

  14. Solar-heating system design package

    Science.gov (United States)

    1980-01-01

    Report describes solar heating system composed of warm-air solar collector, logic control unit, and switching and transport unit, that meets government standards for installation in residential dwellings. Text describes system operation and performance specifications complemented by comprehensive set of subcomponent design drawings.

  15. DESIGN AND OPTIMIZATION OF A REFRIGERATION SYSTEM

    Science.gov (United States)

    The paper discusses the design and optimization of a refrigeration system, using a mathematical model of a refrigeration system modified to allow its use with the optimization program. he model was developed using only algebraic equations so that it could be used with the optimiz...

  16. Design data brochure: SIMS prototype system 2

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    Information is provided on the design and performance of the IBM SIMS Prototype System 2, solar domestic hot water system, for single family residences. The document provides sufficient data to permit procurement, installation, operation, and maintenance by qualified architectural engineers or contractors.

  17. Modular system design for plastic euro pallets

    Directory of Open Access Journals (Sweden)

    J. Tepić

    2012-04-01

    Full Text Available Although pallet, as a tool, yields significant and widely recognized economic effects in production and distribution systems, it is still not fully utilized, indicating that it needs to be defined and developed as a specific product. Euro pallet product was designed using PRO/ENGINEER software system CAD module, as one of the most popular Cax systems, yielding a pallet of novel modular design that meets all the operational requirements of the existing range. The chosen material ensures high pallet longevity and durability, in line with the concept of sustainable development.

  18. Wind energy systems control engineering design

    CERN Document Server

    Garcia-Sanz, Mario

    2012-01-01

    IntroductionBroad Context and MotivationConcurrent Engineering: A Road Map for EnergyQuantitative Robust ControlNovel CAD Toolbox for QFT Controller DesignOutline Part I: Advanced Robust Control Techniques: QFT and Nonlinear SwitchingIntroduction to QFTQuantitative Feedback TheoryWhy Feedback? QFT OverviewInsight into the QFT TechniqueBenefits of QFTMISO Analog QFT Control SystemIntroductionQFT Method (Single-Loop MISO System)Design Procedure OutlineMinimum-Phase System Performance SpecificationsJ LTI Plant ModelsPlant Templates of P?(s), P( j_i )Nominal PlantU-Contour (Stability Bound)Trackin

  19. Production System Design for Multiple Brands

    DEFF Research Database (Denmark)

    Karlsson, Christer; Christensen, Irene

    Production systems enabling both cost efficiency and flexibility in terms of high product variation are explored. The study follows an explorative longitudinal field study approach. The database consists of three large global corporations, each consisting of several companies producing household...... appliances, cars, and trucks but also other products. An important denominator for the production system design is flow structures. Important dependent factors come from brand distinction, architectural characteristics, technology levels, supplier competence, process choice, process flow patterns, lay......-outs, worker skills, integration of distribution channels, after sales service and degree of servitization. Three production system design principles called VXY emerge....

  20. Probabilistic Design of Offshore Structural Systems

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    1988-01-01

    Probabilistic design of structural systems is considered in this paper. The reliability is estimated using first-order reliability methods (FORM). The design problem is formulated as the optimization problem to minimize a given cost function such that the reliability of the single elements...... satisfies given requirements or such that the systems reliability satisfies a given requirement. Based on a sensitivity analysis optimization procedures to solve the optimization problems are presented. Two of these procedures solve the system reliability-based optimization problem sequentially using quasi...

  1. Meta-Information Systems: a design study

    OpenAIRE

    Mark Madsen; Iain Fogg; Clive Ruggles

    1994-01-01

    Metadata systems are concerned with the management of data which describes other data, whether datasets, catalogues or entire database management systems. Metadata systems can be used to store richly detailed forms of information, perform seamless wide-ranging searches of information distributed across networks, and to integrate information stored in disparate repositories. Here we describe the design and methods of implementation derived from the experience of the Leicester University Metada...

  2. Languages and tools for hybrid systems design

    OpenAIRE

    Carloni, LP; Passerone, R.; Pinto, A.; Sangiovanni-Vincentelli, AL

    2006-01-01

    The explosive growth of embedded electronics is bringing information and control systems of increasing complexity to every aspects of our lives. The most challenging designs are safety-critical systems, such as transportation systems (e.g., airplanes, cars, and trains), industrial plants and health care monitoring. The difficulties reside in accommodating constraints both on functionality and implementation. The correct behavior must be guaranteed under diverse states of the environment and p...

  3. Reliable computer systems design and evaluatuion

    CERN Document Server

    Siewiorek, Daniel

    2014-01-01

    Enhance your hardware/software reliabilityEnhancement of system reliability has been a major concern of computer users and designers ¦ and this major revision of the 1982 classic meets users' continuing need for practical information on this pressing topic. Included are case studies of reliablesystems from manufacturers such as Tandem, Stratus, IBM, and Digital, as well as coverage of special systems such as the Galileo Orbiter fault protection system and AT&T telephone switching processors.

  4. Parallel Algorithm Design on Some Distributed Systems

    Institute of Scientific and Technical Information of China (English)

    孙家昶; 张林波; 等

    1997-01-01

    Some testing results on DAWINING-1000,Paragon and workstation cluster are described in this paper.On the home-made parallel system DAWNING-1000 with 32 computational processors,the practical performance of 1.1777 Gflops and 1.58 Gflops has been measured in solving a dense linear system and doing matrix multiplication,respectively .The scalability is also investigated.The importance of designing efficient parallel algorithms for evaluating parallel systems is emphasized.

  5. Procedure Design to Fulfill Quality Management System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    With the application of the principle of PDCA, and dr awing on the experience of the process methods of the ISO9000 and the system met hods of management, the author analyses the basic requirement to fulfill quality management system in enterprises. Then the author inquires into the procedure t o establish the efficiency quality management system. Finally four stages (plan, do, check, action) and eight steps (decision, plan, analyze, design, do, check, improve, fulfill) are put forward to fulfill qualit...

  6. Transceiver and system design for digital communications

    CERN Document Server

    Bullock, Scott R

    2014-01-01

    This is the fourth edition of this successful professional reference book on transceiver design, the device that both sends and receives signals, and its place within the wireless communication system. It gives engineers and others a good intuitive understanding of wireless systems and spread spectrum. New topics covered include cognitive radio, systems, networks, and commercial communications. In addition, many items have been extensively updated to improve the flow of the book and enhance comprehension.

  7. VOCs monitoring system simulation and design

    Science.gov (United States)

    Caldararu, Florin; Vasile, Alexandru; Vatra, Cosmin

    2010-11-01

    The designed and simulated system will be used in the tanning industry, for Volatile Organic Compound (VOC) measurements. In this industry, about 90% of the solvent contained in the emulsions evaporates during its application, giving rise to VOC, which are at the same time hazardous atmospheric pollutants and one of the sources of ground level photochemical ozone formation. It results that a monitoring system is necessary in a leather finishing process, in order to detect hazardous VOC concentration and conducting process in order of VOC concentration diminishing. The paper presents the design of a VOC monitoring system, which includes sensors for VOCs and temperature, the conditioning circuitry for these sensors, the suction system of the gas in the hood, the data acquisition and the computing system and graphic interface. The used sensor in the detection system is a semiconductor sensor, produced by Figaro Engineering Inc., characterized by a short response time, high sensitivity at almost all VOC substances. The design of the conditioning circuitry and data acquisition is done in order to compensate the sensor response variation with temperature and to maintain the low response time of the sensor. The temperature compensation is obtained by using a thermistor circuitry, and the compensation is done within the software design. A Mitsubishi PLC is used to receive the output signals of the circuits including the sensor and of the thermistor, respectively. The acquisition and computing system is done using Mitsubishi ALPHA 2 controller and a graphical terminal, GOT 1000.

  8. Design Criteria For Networked Image Analysis System

    Science.gov (United States)

    Reader, Cliff; Nitteberg, Alan

    1982-01-01

    Image systems design is currently undergoing a metamorphosis from the conventional computing systems of the past into a new generation of special purpose designs. This change is motivated by several factors, notably among which is the increased opportunity for high performance with low cost offered by advances in semiconductor technology. Another key issue is a maturing in understanding of problems and the applicability of digital processing techniques. These factors allow the design of cost-effective systems that are functionally dedicated to specific applications and used in a utilitarian fashion. Following an overview of the above stated issues, the paper presents a top-down approach to the design of networked image analysis systems. The requirements for such a system are presented, with orientation toward the hospital environment. The three main areas are image data base management, viewing of image data and image data processing. This is followed by a survey of the current state of the art, covering image display systems, data base techniques, communications networks and software systems control. The paper concludes with a description of the functional subystems and architectural framework for networked image analysis in a production environment.

  9. Architecture design of a virtualized embedded system

    Directory of Open Access Journals (Sweden)

    A.Sbaa

    2013-01-01

    Full Text Available Nowadays, embedded systems have become a major driver of technological developments particularly in the industrial sector. In an embedded system, the hardware and software components are so intertwined that evolution is often a big issue. Thanks to the contributions of virtualization it is possible to design more flexible and scalable embedded systems. In fact, virtualization adds an abstraction layer between the hardware and the software to make it less intimately dependent. In this paper we propose system architecture based on embedded virtualization that will be modeled by the multi-agent systems. In the first part, we will discuss the state of the art with respect to embedded systems, multi-agent systems and the concept of virtualization. In the second part, we explain theissues related to traditional embedded systems and the constraints associated with their architecture. Subsequently, we propose a virtualization based architecture for embedded systems. In the last part we will showcase this architecture through a prototype.

  10. Design of a physical format coding system

    Science.gov (United States)

    Hu, Beibei; Pei, Jing; Zhang, Qicheng; Liu, Hailong; Tang, Yi

    2008-12-01

    A novel design of physical format coding system (PFCS) is presented based on Multi-level read-only memory disc (ML ROM) in order to solve the problem of low efficiency and long period of disc testing during system development. The PFCS is composed of four units, which are 'Encode', 'Add Noise', 'Decode', 'Error Rate', and 'Information'. It is developed with MFC under the environment of VC++ 6.0, and capable to visually simulate the procedure of data processing for ML ROM. This system can also be used for developing other optical disc storage system or similar channel coding system.

  11. DESIGN PATTERNS FOR SELF ADAPTIVE SYSTEMS ENGINEERING

    Directory of Open Access Journals (Sweden)

    Yousef Abuseta

    2015-07-01

    Full Text Available Self adaptation has been proposed to overcome the complexity of today's software systems which results from the uncertainty issue. Aspects of uncertainty include changing systems goals, changing resource availability and dynamic operating conditions. Feedback control loops have been recognized as vital elements for engineering self-adaptive systems. However, despite their importance, there is still a lack of systematic way of the design of the interactions between the different components comprising one particular feedback control loop as well as the interactions between components from different control loops . Most existing approaches are either domain specific or too abstract to be useful. In addition, the issue of multiple control loops is often neglected and consequently self adaptive systems are often designed around a single loop. In this paper we propose a set of design patterns for modeling and designing self adaptive software systems based on MAPE-K. Control loop of IBM architecture blueprint which takes into account the multiple control loops issue. A case study is presented to illustrate the applicability of the proposed design patterns.

  12. CRISP90 - SOFTWARE DESIGN ANALYZER SYSTEM

    Science.gov (United States)

    Tausworthe, R. C.

    1994-01-01

    The CRISP90 Software Design Analyzer System, an update of CRISP-80, is a set of programs forming a software design and documentation tool which supports top-down, hierarchic, modular, structured design and programming methodologies. The quality of a computer program can often be significantly influenced by the design medium in which the program is developed. The medium must foster the expression of the programmer's ideas easily and quickly, and it must permit flexible and facile alterations, additions, and deletions to these ideas as the design evolves. The CRISP90 software design analyzer system was developed to provide the PDL (Programmer Design Language) programmer with such a design medium. A program design using CRISP90 consists of short, English-like textual descriptions of data, interfaces, and procedures that are imbedded in a simple, structured, modular syntax. The display is formatted into two-dimensional, flowchart-like segments for a graphic presentation of the design. Together with a good interactive full-screen editor or word processor, the CRISP90 design analyzer becomes a powerful tool for the programmer. In addition to being a text formatter, the CRISP90 system prepares material that would be tedious and error prone to extract manually, such as a table of contents, module directory, structure (tier) chart, cross-references, and a statistics report on the characteristics of the design. Referenced modules are marked by schematic logic symbols to show conditional, iterative, and/or concurrent invocation in the program. A keyword usage profile can be generated automatically and glossary definitions inserted into the output documentation. Another feature is the capability to detect changes that were made between versions. Thus, "change-bars" can be placed in the output document along with a list of changed pages and a version history report. Also, items may be marked as "to be determined" and each will appear on a special table until the item is

  13. Algal Supply System Design - Harmonized Version

    Energy Technology Data Exchange (ETDEWEB)

    Jared Abodeely; Daniel Stevens; Allison Ray; Debor

    2013-03-01

    The objective of this design report is to provide an assessment of current technologies used for production, dewatering, and converting microalgae cultivated in open-pond systems to biofuel. The original draft design was created in 2011 and has subsequently been brought into agreement with the DOE harmonized model. The design report extends beyond this harmonized model to discuss some of the challenges with assessing algal production systems, including the ability to (1) quickly assess alternative algal production system designs, (2) assess spatial and temporal variability, and (3) perform large-scale assessments considering multiple scenarios for thousands of potential sites. The Algae Logistics Model (ALM) was developed to address each of these limitations of current modeling efforts to enable assessment of the economic feasibility of algal production systems across the United States. The (ALM) enables (1) dynamic assessments using spatiotemporal conditions, (2) exploration of algal production system design configurations, (3) investigation of algal production system operating assumptions, and (4) trade-off assessments with technology decisions and operating assumptions. The report discusses results from the ALM, which is used to assess the baseline design determined by harmonization efforts between U.S. DOE national laboratories. Productivity and resource assessment data is provided by coupling the ALM with the Biomass Assessment Tool developed at PNNL. This high-fidelity data is dynamically passed to the ALM and used to help better understand the impacts of spatial and temporal constraints on algal production systems by providing a cost for producing extracted algal lipids annually for each potential site.

  14. Radioactive contamination mapping system detailed design report

    International Nuclear Information System (INIS)

    The Hanford Site's 100 Area production reactors released radioactively and chemically contaminated liquids into the soil column. The primary source of the contaminated liquids was reactor coolant and various waste waters released from planned liquid discharges, as well as pipelines, pipe junctions, and retention basins leaking into the disposal sites. Site remediation involves excavating the contaminated soils using conventional earthmoving techniques and equipment, treating as appropriate, transporting the soils, and disposing the soils at ERDF. To support remediation excavation, disposal, and documentation requirements, an automated radiological monitoring system was deemed necessary. The RCMS (Radioactive Contamination Mapping System) was designed to fulfill this need. This Detailed Design Report provides design information for the RCMS in accordance with Bechtel Hanford, Inc. Engineering Design Project Instructions

  15. System Design Description PFP Thermal Stabilization

    International Nuclear Information System (INIS)

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures

  16. Design Requirements for Designing Responsive Modular Manufacturing Systems

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Madsen, Ole; Nielsen, Kjeld;

    2011-01-01

    and industrial work are conducted in this area and has resulted in a wide span of theories, models, and methods. Manufacturing companies are, regardless hereon, still facing these challenges, especially regarding their manufacturing systems. Several theories state that modular manufacturing concepts possess...... requirement in order to achieve responsiveness and other benefits of modular manufacturing systems (MMS). Due to the complex and interrelated nature of a production system and its surroundings these production needs are complex to identify. This paper presents an analysis framework for identification......Customers demand the newest technologies, newest designs, the ability to customise, high quality, and all this at a low cost. These are trends which challenge the traditional way of operating manufacturing companies, especially in regard to product development and manufacturing. Research...

  17. Modeling Forensic Evidence Systems Using Design Science

    OpenAIRE

    Armstrong, Colin; Armstrong, Helen

    2010-01-01

    This paper presents an overview of the application of design science research to the tactical management of forensic evidence processing. The opening discussion addresses the application of design science techniques to specific socio-technical information systems research in regard to processing forensic evidence. The discussion then presents the current problems faced by those dealing with evidence and a conceptual meta-model for a unified approach to forensic evidence is developed. Any prac...

  18. Conceptual frames for changing production system design

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Broberg, Ole

    2003-01-01

    In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based on an understand...... on an understanding of design proc-esses as social processes we suggest a supplementary role for ergonomists: political agents. This might open up for a new understanding and thereby influence the priorities of ergonomics in enterprises....

  19. Tritium glovebox stripper system seismic design evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Grinnell, J. J. [Savannah River Site (SRS), Aiken, SC (United States); Klein, J. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-01

    The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological doses to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.

  20. Eco-design of power transmissions systems

    International Nuclear Information System (INIS)

    The demand to preserve the environment and form a sustainable development is greatly increasing in the recent decades all over the world, and this environmental concern is also merged in electrical power industry, resulting in many eco-design approaches in Transmission and Distribution (T and D) industries. As a method of eco-design, Life Cycle Assessment (LCA) is a systematic tool that enables the assessment of the environmental impacts of a product or service throughout its entire life cycle, i.e. raw material production, manufacture, distribution, use and disposal including all intervening transportation steps necessary or caused by the product's existence. In T and D industries, LCA has been done for a lot of products individually, in order to see one product's environmental impacts and to seek for ways of improving its environmental performance. This eco-design for product approach is a rather well-developed trend, however, as only a single electrical product cannot provide the electrical power to users, electrical system consists of a huge number of components, in order to investigate system's environmental profile, the entire environmental profiles of different composing products has to be integrated systematically, that is to say, a system approach is needed. Under this philosophy, the study 'Eco-design of Power Transmission Systems' is conducted in this thesis, with the purpose of analysing the transmission systems' environmental impacts, locating the major environmental burden sources of transmission systems, selecting and/or developing methodologies of reducing its environmental impacts. (author)

  1. Human Systems Interface Design Methods Using Ecological Interface Design Principles

    International Nuclear Information System (INIS)

    The results of this study categorized into two parts. The first part is the guidelines for EID designs. The procedure to observe for EID design is composed of 6 steps; 1) to define a target system, 2) to make an abstraction hierarchy model, 3) to check the link structure among each components included in the layers of abstraction hierarchy model, 4) to transform information requirements to variables, 5) to make the graphs related to each variables, 6) to check the graphs by visual display design principles and heuristic rules. The second part is an EID design alternative for nuclear power plant. The EID for high level function represents the energy balance and energy flow in each loop of nuclear power plant. The EID for middle level function represents the performance indicators of each equipment involved in the all processes of changing from coolants to steam. The EID for low level function represents the values measured in each equipment such as temperature, pressure, water level and so on

  2. PEMFC MEA and System Design Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Knights, Shanna [Ballard Power Systems, Inc.; Bashyam, Rajesh [Ballard Power Systems, Inc.; He, Ping [Ballard Power Systems, Inc.; Lauritzen, Michael [Ballard Power Systems, Inc.; Startek, Cara [Ballard Power Systems, Inc.; Colbow, Vesna [Ballard Power Systems, Inc.; Cheng, Tommy [Ballard Power Systems, Inc.; Kolodziej, Joanna [Ballard Power Systems, Inc.; Wessel, Silvia [Ballard Power Systems, Inc.

    2011-07-01

    Proton exchange membrane fuel cells (PEMFCs) are being developed and sold commercially for multiple near term markets. Ballard Power Systems is focused on the near term markets of backup power, distributed generation, materials handling, and buses. Significant advances have been made in cost and durability of fuel cell products. Improved tolerance to a wide range of system operation and environmental noises will enable increased viability across a broad range of applications. In order to apply the most effective membrane electrode assembly (MEA) design for each market, the system requirements and associated MEA failures must be well understood. The failure modes associated with the electrodes and membrane degradation are discussed with respect to associated system operation and mitigating approaches. A few key system considerations that influence MEA design include expected fuel quality, balance-of-plant materials, time under idle or open circuit operation, and start-up and shut-down conditions.

  3. Systems design methodology to develop chrysanthemum growing systems

    NARCIS (Netherlands)

    Blok, C.; Vermeulen, T.

    2012-01-01

    When chrysanthemum growers change soil for a soilless growing system they aim for labour cost reduction, quality and yield improvement and reduced emissions of nutrients. Because many attempts to come up with a viable soilless system failed, improvements and systemizations of the design process were

  4. Design Criteria for Bagless Transfer System (BTS) Packaging System

    International Nuclear Information System (INIS)

    This document provides the criteria for the design and installation of a Bagless Transfer System (BTS); Blend, Sieve and Balance Equipment; and Supercritical Fluid Extraction System (SFE). The project consists of 3 major modules: (1) Bagless Transfer System (BTS) Module; (2) Blend, Sieve and Balance Equipment; and (3) Supercritical Fluid Extraction (SFE) Module

  5. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  6. Design and Management of Networked Information Systems

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    and networks actually organized and carried out?4. What are the consequences for work content, skills, working conditions, etc.? The research project consists of a theoretical analysis of contemporary management theories as well as a number of in-depth case studies of firms engaged in the design......In this paper, we present a newly started research project at the Center for Tele-Information at the Technical University of Denmark. The project focuses on the design and management of networked information systems, that is computer-based IS linked by a wide area network and supporting...... practices and work organization in different locations may make it very difficult to reach a common understanding of the purpose, design and use of the system; and (d) conflicts of interest and opportunistic behavior may impede or even confound the development of the system. We focus on the following four...

  7. Distributed systems design using separable communications

    International Nuclear Information System (INIS)

    One of the promises of distributed systems is the ability to design each process function largely independently of the others, and in many cases locate the resulting hardware in close proximity to the application. The communications architecture for such systems should be approached in the same way, using separable communications facilities to meet individual sets of requirements while at the same time reducing the interactions between functions. Where complete physical separation is not feasible and hardware resource sharing is required, the protocols should be designed emphasizing the logical separation of communication paths. This paper discusses the different types of communications for process control applictions and the parameters which need to be characterized in designing separable communications for distributed systems. (auth)

  8. Biomedical Engineering Strategies in System Design Space

    Science.gov (United States)

    Savageau, Michael A.

    2011-01-01

    Modern systems biology and synthetic bioengineering face two major challenges in relating properties of the genetic components of a natural or engineered system to its integrated behavior. The first is the fundamental unsolved problem of relating the digital representation of the genotype to the analog representation of the parameters for the molecular components. For example, knowing the DNA sequence does not allow one to determine the kinetic parameters of an enzyme. The second is the fundamental unsolved problem of relating the parameters of the components and the environment to the phenotype of the global system. For example, knowing the parameters does not tell one how many qualitatively distinct phenotypes are in the organism's repertoire or the relative fitness of the phenotypes in different environments. These also are challenges for biomedical engineers as they attempt to develop therapeutic strategies to treat pathology or to redirect normal cellular functions for biotechnological purposes. In this article, the second of these fundamental challenges will be addressed, and the notion of a “system design space” for relating the parameter space of components to the phenotype space of bioengineering systems will be focused upon. First, the concept of a system design space will be motivated by introducing one of its key components from an intuitive perspective. Second, a simple linear example will be used to illustrate a generic method for constructing the design space in which qualitatively distinct phenotypes can be identified and counted, their fitness analyzed and compared, and their tolerance to change measured. Third, two examples of nonlinear systems from different areas of biomedical engineering will be presented. Finally, after giving reference to a few other applications that have made use of the system design space approach to reveal important design principles, some concluding remarks concerning challenges and opportunities for further

  9. Innovation design of power nuclear systems

    International Nuclear Information System (INIS)

    Efforts to ensure design and manufacturing innovations in the sphere of power reactors have reached the level of the large-scale inter-state cooperation. Some nuclear power systems are under evaluation in terms of the IAEA International Project dealing with the innovative power reactors and fuel cycles. In Japan the efforts to design fast sodium low-power reactor to serve as a power source in high-cost power regions and in developing power low-consuming countries are in progress. In South Korea the efforts to design a high-power reactor, that is, the APR1400 reactor based on the KSNP Korean available standard plant are in progress

  10. Designing Traceability into Big Data Systems

    OpenAIRE

    McClatchey, Richard; Branson, Andrew; Shamdasani, Jetendr; Kovacs, Zsolt; Consortium, the CRISTAL-ISE

    2015-01-01

    Providing an appropriate level of accessibility and traceability to data or process elements (so-called Items) in large volumes of data, often Cloud-resident, is an essential requirement in the Big Data era. Enterprise-wide data systems need to be designed from the outset to support usage of such Items across the spectrum of business use rather than from any specific application view. The design philosophy advocated in this paper is to drive the design process using a so-called description-dr...

  11. Publish Subscribe Systems Design and Principles

    CERN Document Server

    Tarkoma, Sasu

    2012-01-01

    This book offers an unified treatment of the problems solved by publish/subscribe, how to design and implement the solutions In this book, the author provides an insight into the publish/subscribe technology including the design, implementation, and evaluation of new systems based on the technology.  The book also addresses the basic design patterns and solutions, and discusses their application in practical application scenarios. Furthermore, the author examines current standards and industry best practices as well as recent research proposals in the area. Finally, necessary content ma

  12. System design description PFP thermal stabilization

    International Nuclear Information System (INIS)

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides

  13. Transceiver and system design for digital communications

    CERN Document Server

    Bullock, Scott

    2009-01-01

    Now in a 3rd edition, this successful book provides an intuitive approach to transceiver design, allowing a broad spectrum of readers to understand the topics clearly. It covers a wide range of data link communication design techniques, including link budgets, dynamic range and system analysis of receivers and transmitters used in data link communications, digital modulation and demodulation techniques of phase-shift keyed and frequency hopped spread spectrum systems using phase diagrams, multipath, gain control, an intuitive approach to probability, jamming reduction method using various adap

  14. Design philosophy of PFBR shutdown systems

    International Nuclear Information System (INIS)

    This paper presents the overall design philosophy of shutdown system of 500 MWe Prototype Fast Breeder Reactor (PFBR). It discusses design criteria, parameters calling for safety action, different safety actions and the concepts conceived for shutdown systems. In tune with the philosophy of defence-in-depth, additional passive shutdown features, viz., Self Actuating Device (SADE) and Curie Point Magnetic (CPM) switch and protective feature like absorber rod Stroke Limiting Device (SLD) are contemplated. It also discusses about suitability of Gas Expansion Module (GEM) as one of the safety devices in PFBR. (author). 3 refs, 3 figs, 1 tab

  15. ENABLER Nuclear Propulsion System Conceptual Design

    Science.gov (United States)

    Pauley, Keith A.; Woodham, Kurt; Ohi, Don; Haga, Heath; Henderson, Bo

    2004-02-01

    The Titan Corporation conducted a systems engineering study to develop an overall architecture that meets both the articulated and unarticulated requirements on the Prometheus Program with the least development effort. Key elements of the Titan-designed ENABLER system include a thermal fission reactor, thermionic power converters, sodium heat pipes, ion thruster engines, and a radiation shield and deployable truss to protect the payload. The overall design is scaleable over a wide range of power requirements from 10s of kilowatts to 10s of megawatts.

  16. Design of LVDT Based Digital Weighing System

    Directory of Open Access Journals (Sweden)

    Pratiksha Sarma

    2012-09-01

    Full Text Available - Linear variable differential transformer (LVDT has evolved into a highly accurate and reliable form of displacement transducer and has found widespread application in industry for the measurement of displacement, force or pressure. This paper discusses the design consideration of an LVDT based digital weighing system capable of weighing up to 1000 grams (1 kilogram. Atmel 89S52 microcontroller is used to acquire, process and display the weight into 16x2 LCD. The system has been designed and calibrated using standard weights and is found to be simple and of low cost.

  17. Virtual smile design systems: a current review.

    Science.gov (United States)

    Zimmermann, Moritz; Mehl, Albert

    2015-01-01

    In the age of digital dentistry, virtual treatment planning is becoming an increasingly important element of dental practice. Thanks to new technological advances in the computer- assisted design and computer-assisted manufacturing (CAD/CAM) of dental restorations, predictable interdisciplinary treatment using the backward planning approach appears useful and feasible. Today, a virtual smile design can be used as the basis for creating an esthetic virtual setup of the desired final result. The virtual setup, in turn, is used to plan further treatment steps in an interdisciplinary team approach, and communicate the results to the patient. The smile design concept and the esthetic analyses required for it are described in this article. We include not only a step-by-step description of the virtual smile design workflow, but also describe and compare the several available smile design options and systems. Subsequently, a brief discussion of the advantages and limitations of virtual smile design is followed by a section on different ways to integrate a two-dimensional (2D) smile design into the digital three-dimensional (3D) workflow. New technological developments are also described, such as the integration of smile designs in digital face scans, and 3D diagnostic follow-up using intraoral scanners.

  18. Archiving Websites

    DEFF Research Database (Denmark)

    Brügger, Niels

    This book treats the micro archiving of websites, i.e. archiving by researchers, students or others without special technical knowledge who, using a standard computer, wish to save a website for further study. The phenomenon is discussed from the standpoint that Internet research must be able...... to stabilise and save the object of its analysis. However, the Internet is endowed with certain fundamental media-specific dynamics that make stabilisation difficult. Based on an account and discussion of these dynamics (linked as they are to sender, text and recipient) the following double conclusion...... is reached. Firstly, unlike other well-known media, the Internet does not simply exist in a form suited to being archived, but rather is first formed as an object of study in the archiving, and it is formed differently depending on who does the archiving, when, and for what purpose. Secondly, this means...

  19. Safety Aspects of Big Cryogenic Systems Design

    Science.gov (United States)

    Chorowski, M.; Fydrych, J.; Poliński, J.

    2010-04-01

    Superconductivity and helium cryogenics are key technologies in the construction of large scientific instruments, like accelerators, fusion reactors or free electron lasers. Such cryogenic systems may contain more than hundred tons of helium, mostly in cold and high-density phases. In spite of the high reliability of the systems, accidental loss of the insulation vacuum, pipe rupture or rapid energy dissipation in the cold helium can not be overlooked. To avoid the danger of over-design pressure rise in the cryostats, they need to be equipped with a helium relief system. Such a system is comprised of safety valves, bursting disks and optionally cold or warm quench lines, collectors and storage tanks. Proper design of the helium safety relief system requires a good understanding of worst case scenarios. Such scenarios will be discussed, taking into account different possible failures of the cryogenic system. In any case it is necessary to estimate heat transfer through degraded vacuum superinsulation and mass flow through the valves and safety disks. Even if the design of the helium relief system does not foresee direct helium venting into the environment, an occasional emergency helium spill may happen. Helium propagation in the atmosphere and the origins of oxygen-deficiency hazards will be discussed.

  20. Engineering design of systems models and methods

    CERN Document Server

    Buede, Dennis M

    2009-01-01

    The ideal introduction to the engineering design of systems-now in a new edition. The Engineering Design of Systems, Second Edition compiles a wealth of information from diverse sources to provide a unique, one-stop reference to current methods for systems engineering. It takes a model-based approach to key systems engineering design activities and introduces methods and models used in the real world. Features new to this edition include: * The addition of Systems Modeling Language (SysML) to several of the chapters, as well as the introduction of new terminology * Additional material on partitioning functions and components * More descriptive material on usage scenarios based on literature from use case development * Updated homework assignments * The software product CORE (from Vitech Corporation) is used to generate the traditional SE figures and the software product MagicDraw UML with SysML plugins (from No Magic, Inc.) is used for the SysML figures This book is designed to be an introductory reference ...

  1. Optimization methods for alternative energy system design

    Science.gov (United States)

    Reinhardt, Michael Henry

    An electric vehicle heating system and a solar thermal coffee dryer are presented as case studies in alternative energy system design optimization. Design optimization tools are compared using these case studies, including linear programming, integer programming, and fuzzy integer programming. Although most decision variables in the designs of alternative energy systems are generally discrete (e.g., numbers of photovoltaic modules, thermal panels, layers of glazing in windows), the literature shows that the optimization methods used historically for design utilize continuous decision variables. Integer programming, used to find the optimal investment in conservation measures as a function of life cycle cost of an electric vehicle heating system, is compared to linear programming, demonstrating the importance of accounting for the discrete nature of design variables. The electric vehicle study shows that conservation methods similar to those used in building design, that reduce the overall UA of a 22 ft. electric shuttle bus from 488 to 202 (Btu/hr-F), can eliminate the need for fossil fuel heating systems when operating in the northeast United States. Fuzzy integer programming is presented as a means of accounting for imprecise design constraints such as being environmentally friendly in the optimization process. The solar thermal coffee dryer study focuses on a deep-bed design using unglazed thermal collectors (UTC). Experimental data from parchment coffee drying are gathered, including drying constants and equilibrium moisture. In this case, fuzzy linear programming is presented as a means of optimizing experimental procedures to produce the most information under imprecise constraints. Graphical optimization is used to show that for every 1 m2 deep-bed dryer, of 0.4 m depth, a UTC array consisting of 5, 1.1 m 2 panels, and a photovoltaic array consisting of 1, 0.25 m 2 panels produces the most dry coffee per dollar invested in the system. In general this study

  2. Dynamic Systems Modeling in Educational System Design & Policy

    Directory of Open Access Journals (Sweden)

    Jennifer Sterling Groff

    2013-07-01

    Full Text Available Over the last several hundred years, local and national educational systems have evolved from relatively simple systems to incredibly complex, interdependent, policy-laden structures, to which many question their value, effectiveness, and direction they are headed. System Dynamics is a field of analysis used to guide policy and system design in numerous fields including business and urban planning. Applying this tool to educational policy analysis offers insights into the hidden dynamics of the current system, and can be an invaluable tool in designing future scenarios. We explore underlying dynamics of the current US educational system using System Dynamics modeling, and offer an analysis of this tool and its practical application in the US educational system through a case study on the US state of Rhode Island in the 2007-2008 school year. 

  3. Valuation of design adaptability in aerospace systems

    Science.gov (United States)

    Fernandez Martin, Ismael

    As more information is brought into early stages of the design, more pressure is put on engineers to produce a reliable, high quality, and financially sustainable product. Unfortunately, requirements established at the beginning of a new project by customers, and the environment that surrounds them, continue to change in some unpredictable ways. The risk of designing a system that may become obsolete during early stages of production is currently tackled by the use of robust design simulation, a method that allows to simultaneously explore a plethora of design alternatives and requirements with the intention of accounting for uncertain factors in the future. Whereas this design technique has proven to be quite an improvement in design methods, under certain conditions, it fails to account for the change of uncertainty over time and the intrinsic value embedded in the system when certain design features are activated. This thesis introduces the concepts of adaptability and real options to manage risk foreseen in the face of uncertainty at early design stages. The method described herein allows decision-makers to foresee the financial impact of their decisions at the design level, as well as the final exposure to risk. In this thesis, cash flow models, traditionally used to obtain the forecast of a project's value over the years, were replaced with surrogate models that are capable of showing fluctuations on value every few days. This allowed a better implementation of real options valuation, optimization, and strategy selection. Through the option analysis model, an optimization exercise allows the user to obtain the best implementation strategy in the face of uncertainty as well as the overall value of the design feature. Here implementation strategy refers to the decision to include a new design feature in the system, after the design has been finalized, but before the end of its production life. The ability to do this in a cost efficient manner after the system

  4. System identification for robust control design

    Energy Technology Data Exchange (ETDEWEB)

    Dohner, J.L.

    1995-04-01

    System identification for the purpose of robust control design involves estimating a nominal model of a physical system and the uncertainty bounds of that nominal model via the use of experimentally measured input/output data. Although many algorithms have been developed to identify nominal models, little effort has been directed towards identifying uncertainty bounds. Therefore, in this document, a discussion of both nominal model identification and bounded output multiplicative uncertainty identification will be presented. This document is divided into several sections. Background information relevant to system identification and control design will be presented. A derivation of eigensystem realization type algorithms will be presented. An algorithm will be developed for calculating the maximum singular value of output multiplicative uncertainty from measured data. An application will be given involving the identification of a complex system with aliased dynamics, feedback control, and exogenous noise disturbances. And, finally, a short discussion of results will be presented.

  5. Intelligent and Pervasive Archiving Framework to Enhance the Usability of the Zero-Client-Based Cloud Storage System

    Directory of Open Access Journals (Sweden)

    Keedong Yoo

    2014-01-01

    Full Text Available The cloud storage-based zero client technology gains companies’ interest because of its capabilities in secured and economic management of information resources. As the use of personal smart devices such as smart phones and pads in business increases, to cope with insufficient workability caused by limited size and computing capacity most of smart devices have, the necessity to apply the zero-client technology is being highlighted. However, from the viewpoint of usability, users point out a very serious problem in using cloud storage-based zero client system: difficulty in deciding and locating a proper directory to store documents. This paper proposes a method to enhance the usability of a zero-client-based cloud storage system by intelligently and pervasively archiving working documents according to automatically identified topic. Without user’s direct definition of directory to store the document, the proposed ideas enable the documents to be automatically archived into the predefined directories. Based on the proposed ideas, more effective and efficient management of electronic documents can be achieved.

  6. RSOFCPN: CONTROL SYSTEM STRUCTURE AND ALGORITHM DESIGN

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A stable control scheme for a class of unknown nonlinear systems was presented. The control architecture is composed of two parts, the fuzzy sliding mode controller (FSMC) is applied to drive the state to a designed switching hyperplane, and a reinforcement self-organizing fuzzy CPN (RSOFCPN) as a feedforward compensator is used to reduce the influence of system uncertainties. The simulation results demonstrate the effectiveness of the proposed control scheme.

  7. Design a continuous miner operated shortwall system

    Energy Technology Data Exchange (ETDEWEB)

    O' Beirne, T.; Clifton, R. (Elcom Collieries P/L (Australia))

    1991-06-01

    A continuous miner based shortwall mining system was designed for Newvale colliery. This system was to provide a cost efficient and geotechnically sound means of extracting the Great Northern Seam, in areas where subsidence constraints precluded total extraction of wide panels. Geotechnical reviews, physical and mathematical modelling identified powered supports as suitable for strata control. Due to a loss of sales contracts and unknown future for the mine, the project was terminated before the demonstration took place.

  8. A Novel Database System Model Design for Tender Management System

    OpenAIRE

    Noraziah, A.; R. Norhayati; Abdalla, Ahmed N.; A. H. Roslina; M. A. Noorlin; O. M. Affendy

    2008-01-01

    This research focus on the software design and database system model for Tender Management System (TMS) in Kadastra. TMS in Kadastra is an automated system that can calculates tender payment claims for the land surveyor company. The calculation is based on the Vide Federal Government Gazette PU (A) 169 Thirteenth Schedule (Regulation 99) Scale of Fees for Title Surveys given by Land Surveyors Board in Malaysia. Based on the system, it provides data availability for read and writes operations ...

  9. Research on university archives management system construction in big data era:A case study on Shandong Jianzhu University%大数据时代高校档案管理系统建设研究——以山东建筑大学为例

    Institute of Scientific and Technical Information of China (English)

    陈明九

    2015-01-01

    大数据时代的技术革新,不仅促进了高校档案建设的发展,而且极大地推动高校档案信息化建设.而高校档案信息化建设是高校档案管理适应时代的发展、创新高校服务工作的重要举措,也是大数据时代档案工作者面临的一项重要的任务.文章以山东建筑大学档案管理系统为例,在分析档案管理目前现状及存在的问题基础上,总结大数据时代高校档案管理系统建设的重要性,针对山东建筑大学的高校档案管理系统进行功能模块设计,并提出系统建设的途径.%The technological innovation of the era of large data,not only promotes the development of the archives in colleges and universities,but also greatly promotes the construction of university archives information. The archives informatization construction archives in colleges and universities is the important measure to adapt to the development of the times and innovate,the service work,,as well as an important task of file workers in the era of big data. Based on Shandong Jianzhu University archives management system,the paper analyzes the present situation and problems of the archives management,summerizes the importance of the construction of university archives management system in the big data age,makes the function module design based on the university archives management system of Shandong Jianzhu University, and puts forward the methods of university archives management system construction.

  10. VXIbus data collection system -- A design study

    International Nuclear Information System (INIS)

    The German support program has sponsored the work to investigate the VXIbus as integration platform for safeguards instrumentation. This paper will cover the analysis of the user requirements for a VXIbus based monitoring system for integrated safeguards -- primarily for reliable unattended in-field collection of large amounts of data. The goal is to develop a suitable system architecture. The design of the system makes use of the VXIbus standard as the selected hardware platform Based upon the requirement analysis and the overriding need for high reliability and robustness, a systematic investigation of different operating system options, as well as development and integration tools will be considered. For the software implementation cycle high and low level programming tools are required. The identification of the constraints for the programming platform and the tool selection will be presented. Both the strategic approach, the rules for analysis and design work as well as the executive components for the support of the implementation and production cycle are given. Here all the conditions for reliable, unattended and integrated safeguards monitoring systems will be addressed. The definition of the basic and advanced design principles are covered. The paper discusses the results of a study on a system produced to demonstrate a high data rate timer/counter application

  11. Trends in nuclear systems design and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Casini, G. (Commission of the European Communities, Joint Research Centre/Ispra Establishment, Inst. for Systems Engineering and Design (Italy))

    1991-12-01

    The papers presented at the poster session 'Nuclear Systems Design and Analyses' are reviewed and trends discussed. The attention is focussed on the following areas: (i) Reactor Studies and (ii) Neutronic Tests and Analysis. Present studies on D-T power reactor conceptual designs should be encouraged. Recent conceptual studies on D-{sup 3}He systems seem adequate to identify the critical issues. The economic feasibility of {sup 3}He supply from the moon should be assessed. Contributions on Neutronics are found to be of particular relevance and represent an important step towards the implementation of data base for nuclear design of plasma facing and breeding blanket components. (orig.).

  12. Solar Energy: Solar System Design Fundamentals.

    Science.gov (United States)

    Knapp, Henry H., III

    This module on solar system design fundamentals is one of six in a series intended for use as supplements to currently available materials on solar energy and energy conservation. Together with the recommended texts and references (sources are identified), these modules provide an effective introduction to energy conservation and solar energy…

  13. Space law information system design, phase 2

    Science.gov (United States)

    Morenoff, J.; Roth, D. L.; Singleton, J. W.

    1973-01-01

    Design alternatives were defined for the implementation of a Space Law Information System for the Office of the General Counsel, NASA. A thesaurus of space law terms was developed and a selected document sample indexed on the basis of that thesaurus. Abstracts were also prepared for the sample document set.

  14. General Design for CARR Neutron Guide System

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    A neutron guide system has been designed and partly installed at the China Advanced Research Reactor (CARR) to transport cold neutrons from the cold neutron source (CNS) to several instruments,which are situated in a separate guide hall of 30 m×60 m.

  15. Agile Design of Sewer System Control

    NARCIS (Netherlands)

    Van Nooijen, R.P.; Kolechkina, A.G.; Van Leeuwen, P.E.R.M.; Van Velzen, E.

    2011-01-01

    We describe the first part of an attempt to include stakeholder participation in the design of a central automatic controller for a sewer system in a small pilot project (five subcatchments) and present lessons learned so far. The pilot is part of a project aimed at the improvement of water quality

  16. Design of POLCA material control systems

    NARCIS (Netherlands)

    Riezebos, J.

    2010-01-01

    POLCA is a material control system designed for make-to-order or engineer-to-order companies. These firms have to cope with a high variety of customised products, and strong pressure to provide short throughput times. POLCA constrains the amount of work in progress on the shop floor in order to achi

  17. Business School's Performance Management System Standards Design

    Science.gov (United States)

    Azis, Anton Mulyono; Simatupang, Togar M.; Wibisono, Dermawan; Basri, Mursyid Hasan

    2014-01-01

    This paper aims to compare various Performance Management Systems (PMS) for business school in order to find the strengths of each standard as inputs to design new model of PMS. There are many critical aspects and gaps notified for new model to improve performance and even recognized that self evaluation performance management is not well…

  18. Microwave Radiometer Systems, Design and Analysis

    DEFF Research Database (Denmark)

    Skou, Niels; Vine, David Le

    Two important microwave remote sensors are the radar and the radiometer. There have been a number of books written on various aspects of radar, but there have been only a few written on microwave radiometers, especially on subjects of how to design and build radiometer systems. This book, which...

  19. Analysis and design of hybrid control systems

    Energy Technology Data Exchange (ETDEWEB)

    Malmborg, J.

    1998-05-01

    Different aspects of hybrid control systems are treated: analysis, simulation, design and implementation. A systematic methodology using extended Lyapunov theory for design of hybrid systems is developed. The methodology is based on conventional control designs in separate regions together with a switching strategy. Dynamics are not well defined if the control design methods lead to fast mode switching. The dynamics depend on the salient features of the implementation of the mode switches. A theorem for the stability of second order switching together with the resulting dynamics is derived. The dynamics on an intersection of two sliding sets are defined for two relays working on different time scales. The current simulation packages have problems modeling and simulating hybrid systems. It is shown how fast mode switches can be found before or during simulation. The necessary analysis work is a very small overhead for a modern simulation tool. To get some experience from practical problems with hybrid control the switching strategy is implemented in two different software environments. In one of them a time-optimal controller is added to an existing PID controller on a commercial control system. Successful experiments with this hybrid controller shows the practical use of the method 78 refs, 51 figs, 2 tabs

  20. Consys Linear Control System Design Software Package

    International Nuclear Information System (INIS)

    This package is created in order to help engineers, researchers, students and all who work on linear control systems. The software includes all time and frequency domain analysises, spectral analysises and networks, active filters and regulators design aids. The programmes are written on Hewlett Packard computer in Basic 4.0

  1. Design review report for the MCO loading system

    Energy Technology Data Exchange (ETDEWEB)

    Brisbin, S.A.

    1997-06-23

    This design report presents the design of the MCO Loading System. The report includes final design drawings, a system description, failure modes and recovery plans, a system operational description, and stress analysis.

  2. Energy-aware design of digital systems

    Energy Technology Data Exchange (ETDEWEB)

    Gruian, F.

    2000-02-01

    Power and energy consumption are important issues in many digital applications, for reasons such as packaging cost and battery life-span. With the development of portable computing and communication, an increasing number of research groups are addressing power and energy related issues at various stages during the design process. Most of the work done in this area focuses on lower abstraction levels, such as gate or transistor level. Ideally, a power and energy-efficient design flow should consider the power and energy issues at every stage in the design process. Therefore, power and energy aware methods, applicable early in the design process are required. In this trend, the thesis presents two high-level design methods addressing power and energy consumption minimization. The first of the two approaches we describe, targets power consumption minimization during behavioral synthesis. This is carried out by minimizing the switching activity, while taking the correlations between signals into account. The second approach performs energy consumption minimization during system-level design, by choosing the most energy-efficient schedule and configuration of resources. Both methods make use of the constraint programming paradigm to model the problems in an elegant manner. The experimental results presented in this thesis show the impact of addressing the power and energy related issues early in the design process.

  3. The Digital Archive Experience

    DEFF Research Database (Denmark)

    Søndergaard, Morten

    2009-01-01

    This article, as well as the book, investigates the ways in which new digital media may enhance the experience of the art-archive. Taken as a whole, the new media is a vital component of a 'transdisciplinary' and transformative field, a cultural landscape that is changing rapidly the conditions....... The book discusses the challenges of the archive and the (art)museum in the age of digital media. It is based upon documentation from a research project, MAP - Media Art Platform, that drew upon the talents and collaboration of many institutions, artists, programmers, art historians, designers and others...

  4. Product System Design – to Household Massage Design as An Example

    OpenAIRE

    Wang Huabin; Lin Qichao

    2016-01-01

    Explain what is the system design and the applications of System design in the product design process. Using The whole idea and systems design methods to analyze the design of household hand massage,Use a chart image to explain that Household hand massage products in the influence of user and the environment, the influence of large system environment for the product. The use of components of the system to anatomy product design. Each system components has a link between and mutual correlation.

  5. Modelling and Analyses of Embedded Systems Design

    DEFF Research Database (Denmark)

    Brekling, Aske Wiid

    semantics to the elements of specifications in the MoVES language. We show that even for seem- ingly simple systems, the complexity of verifying real-time constraints can be overwhelming - but we give an upper limit to the size of the search-space that needs examining. Furthermore, the formal model exposes...... use the MoVES tool to conduct analysis that identifies timing anomalies. We also conduct design space exploration in an example using the MoVES tool. And we show that it can be used for analysis of systems that, in size, resemble industrially-interesting systems. We find that semantically...

  6. Design concept for the FLUTE control system

    Energy Technology Data Exchange (ETDEWEB)

    Marsching, Sebastian; Huttel, Erhard; Mueller, Anke-Susanne; Naknaimueang, Somprasong; Nasse, Michael J.; Rossmanith, Robert; Schreck, Marco; Schuh, Marcel; Schwarz, Markus [Karlsruhe Institute of Technology, Karlsruhe (Germany)

    2013-07-01

    FLUTE is a linac-based THz-source being constructed at the Karlsruhe Institute of Technology (KIT). One of the goals of the FLUTE project is the generation of femtosecond electron-bunches. In order to study the various effects influencing the final bunch length, data-acquisition and storage systems that allow correlation of parameters on a per-pulse basis are required. We are planning to use an EPICS-based control system that employs special techniques for pulse-synchronous data-acquisition. In this talk we present the current design concept for this system.

  7. Mechatronics Design of a Mobile Robot System

    Directory of Open Access Journals (Sweden)

    Ahmad A. Mahfouz

    2013-02-01

    Full Text Available Mobile robot motion control is simplified to a DC motor motion control that may include gear system. The simplest and widespread approach to control the mobile robot motion is the differential drive style, it consists of two in-lines with each a DC motor. Both DC motors are independently powered so the desired movements will rely on how these two DC motors are commanded. Thedevelop design, model and control of Mechatronics mobile robotic system is presented in this paper. The developed robotic system is intended for research purposes as well as for educational process. The model of proposed mobile robot was created and verified using MATLAB-Simulink software.

  8. 'CAWP' as CAE system for structural design

    International Nuclear Information System (INIS)

    A CAE system called ''CAWP'' was developed for purposes of rationalization and quality improvement of structural design in nuclear power plant. CAWP system works through stress analysis including FEM modeling, FEM calculation, structural evaluation and reporting, and consists of 5 fully interconnected subsystem modules. They are the preprocess graphic module for modeling, check and run module for calculation, postprocess module for evaluation, postprocess graphic module, and stock and control module for data processing. By this computerization, costs and periods of time which are needed for stress analysis are reduced. Furthermore, the quality assurance of stress analysis is sustained by cautious procedures to keep the analytical data of this system consistent and traceable. (author)

  9. The Spallation Neutron Source accelerator system design

    Science.gov (United States)

    Henderson, S.; Abraham, W.; Aleksandrov, A.; Allen, C.; Alonso, J.; Anderson, D.; Arenius, D.; Arthur, T.; Assadi, S.; Ayers, J.; Bach, P.; Badea, V.; Battle, R.; Beebe-Wang, J.; Bergmann, B.; Bernardin, J.; Bhatia, T.; Billen, J.; Birke, T.; Bjorklund, E.; Blaskiewicz, M.; Blind, B.; Blokland, W.; Bookwalter, V.; Borovina, D.; Bowling, S.; Bradley, J.; Brantley, C.; Brennan, J.; Brodowski, J.; Brown, S.; Brown, R.; Bruce, D.; Bultman, N.; Cameron, P.; Campisi, I.; Casagrande, F.; Catalan-Lasheras, N.; Champion, M.; Champion, M.; Chen, Z.; Cheng, D.; Cho, Y.; Christensen, K.; Chu, C.; Cleaves, J.; Connolly, R.; Cote, T.; Cousineau, S.; Crandall, K.; Creel, J.; Crofford, M.; Cull, P.; Cutler, R.; Dabney, R.; Dalesio, L.; Daly, E.; Damm, R.; Danilov, V.; Davino, D.; Davis, K.; Dawson, C.; Day, L.; Deibele, C.; Delayen, J.; DeLong, J.; Demello, A.; DeVan, W.; Digennaro, R.; Dixon, K.; Dodson, G.; Doleans, M.; Doolittle, L.; Doss, J.; Drury, M.; Elliot, T.; Ellis, S.; Error, J.; Fazekas, J.; Fedotov, A.; Feng, P.; Fischer, J.; Fox, W.; Fuja, R.; Funk, W.; Galambos, J.; Ganni, V.; Garnett, R.; Geng, X.; Gentzlinger, R.; Giannella, M.; Gibson, P.; Gillis, R.; Gioia, J.; Gordon, J.; Gough, R.; Greer, J.; Gregory, W.; Gribble, R.; Grice, W.; Gurd, D.; Gurd, P.; Guthrie, A.; Hahn, H.; Hardek, T.; Hardekopf, R.; Harrison, J.; Hatfield, D.; He, P.; Hechler, M.; Heistermann, F.; Helus, S.; Hiatt, T.; Hicks, S.; Hill, J.; Hill, J.; Hoff, L.; Hoff, M.; Hogan, J.; Holding, M.; Holik, P.; Holmes, J.; Holtkamp, N.; Hovater, C.; Howell, M.; Hseuh, H.; Huhn, A.; Hunter, T.; Ilg, T.; Jackson, J.; Jain, A.; Jason, A.; Jeon, D.; Johnson, G.; Jones, A.; Joseph, S.; Justice, A.; Kang, Y.; Kasemir, K.; Keller, R.; Kersevan, R.; Kerstiens, D.; Kesselman, M.; Kim, S.; Kneisel, P.; Kravchuk, L.; Kuneli, T.; Kurennoy, S.; Kustom, R.; Kwon, S.; Ladd, P.; Lambiase, R.; Lee, Y. Y.; Leitner, M.; Leung, K.-N.; Lewis, S.; Liaw, C.; Lionberger, C.; Lo, C. C.; Long, C.; Ludewig, H.; Ludvig, J.; Luft, P.; Lynch, M.; Ma, H.; MacGill, R.; Macha, K.; Madre, B.; Mahler, G.; Mahoney, K.; Maines, J.; Mammosser, J.; Mann, T.; Marneris, I.; Marroquin, P.; Martineau, R.; Matsumoto, K.; McCarthy, M.; McChesney, C.; McGahern, W.; McGehee, P.; Meng, W.; Merz, B.; Meyer, R.; Meyer, R.; Miller, B.; Mitchell, R.; Mize, J.; Monroy, M.; Munro, J.; Murdoch, G.; Musson, J.; Nath, S.; Nelson, R.; Nelson, R.; O`Hara, J.; Olsen, D.; Oren, W.; Oshatz, D.; Owens, T.; Pai, C.; Papaphilippou, I.; Patterson, N.; Patterson, J.; Pearson, C.; Pelaia, T.; Pieck, M.; Piller, C.; Plawski, T.; Plum, M.; Pogge, J.; Power, J.; Powers, T.; Preble, J.; Prokop, M.; Pruyn, J.; Purcell, D.; Rank, J.; Raparia, D.; Ratti, A.; Reass, W.; Reece, K.; Rees, D.; Regan, A.; Regis, M.; Reijonen, J.; Rej, D.; Richards, D.; Richied, D.; Rode, C.; Rodriguez, W.; Rodriguez, M.; Rohlev, A.; Rose, C.; Roseberry, T.; Rowton, L.; Roybal, W.; Rust, K.; Salazer, G.; Sandberg, J.; Saunders, J.; Schenkel, T.; Schneider, W.; Schrage, D.; Schubert, J.; Severino, F.; Shafer, R.; Shea, T.; Shishlo, A.; Shoaee, H.; Sibley, C.; Sims, J.; Smee, S.; Smith, J.; Smith, K.; Spitz, R.; Staples, J.; Stein, P.; Stettler, M.; Stirbet, M.; Stockli, M.; Stone, W.; Stout, D.; Stovall, J.; Strelo, W.; Strong, H.; Sundelin, R.; Syversrud, D.; Szajbler, M.; Takeda, H.; Tallerico, P.; Tang, J.; Tanke, E.; Tepikian, S.; Thomae, R.; Thompson, D.; Thomson, D.; Thuot, M.; Treml, C.; Tsoupas, N.; Tuozzolo, J.; Tuzel, W.; Vassioutchenko, A.; Virostek, S.; Wallig, J.; Wanderer, P.; Wang, Y.; Wang, J. G.; Wangler, T.; Warren, D.; Wei, J.; Weiss, D.; Welton, R.; Weng, J.; Weng, W.-T.; Wezensky, M.; White, M.; Whitlatch, T.; Williams, D.; Williams, E.; Wilson, K.; Wiseman, M.; Wood, R.; Wright, P.; Wu, A.; Ybarrolaza, N.; Young, K.; Young, L.; Yourd, R.; Zachoszcz, A.; Zaltsman, A.; Zhang, S.; Zhang, W.; Zhang, Y.; Zhukov, A.

    2014-11-01

    The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ~100 high-power RF power systems, a 2 K cryogenic plant, ~400 DC and pulsed power supply systems, ~400 beam diagnostic devices and a distributed control system handling ~100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.

  10. The Spallation Neutron Source accelerator system design

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, S., E-mail: stuarth@fnal.gov [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Abraham, W. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Aleksandrov, A. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Allen, C. [Techsource, Inc., 1475 Central Avenue, Suite 250, Los Alamos, NM 87544-3291 (United States); Alonso, J. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Anderson, D. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Arenius, D. [Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Arthur, T. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Assadi, S. [Techsource, Inc., 1475 Central Avenue, Suite 250, Los Alamos, NM 87544-3291 (United States); Ayers, J.; Bach, P. [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Badea, V. [Brookhaven National Laboratory, P.O. Box 5000, Upton, NY 11973-5000 (United States); Battle, R. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Beebe-Wang, J. [Brookhaven National Laboratory, P.O. Box 5000, Upton, NY 11973-5000 (United States); Bergmann, B.; Bernardin, J.; Bhatia, T.; Billen, J.; Birke, T.; Bjorklund, E. [Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM 87545 (United States); and others

    2014-11-01

    The Spallation Neutron Source (SNS) was designed and constructed by a collaboration of six U.S. Department of Energy national laboratories. The SNS accelerator system consists of a 1 GeV linear accelerator and an accumulator ring providing 1.4 MW of proton beam power in microsecond-long beam pulses to a liquid mercury target for neutron production. The accelerator complex consists of a front-end negative hydrogen-ion injector system, an 87 MeV drift tube linear accelerator, a 186 MeV side-coupled linear accelerator, a 1 GeV superconducting linear accelerator, a 248-m circumference accumulator ring and associated beam transport lines. The accelerator complex is supported by ∼100 high-power RF power systems, a 2 K cryogenic plant, ∼400 DC and pulsed power supply systems, ∼400 beam diagnostic devices and a distributed control system handling ∼100,000 I/O signals. The beam dynamics design of the SNS accelerator is presented, as is the engineering design of the major accelerator subsystems.

  11. Design considerations for Mars photovoltaic power systems

    Science.gov (United States)

    Landis, Geoffrey A.; Appelbaum, Joseph

    1990-01-01

    Considerations for operation of a photovoltaic power system on Mars are discussed with reference to Viking Lander data. The average solar insolation at Mars is 590 W/sq m, which is reduced yet further by atmospheric dust. Of major concern are dust storms, which have been observed to occur on local as well as on global scales, and their effect on solar array output. While atmospheric opacity may rise to values ranging from 3 to 9, depending on storm severity, there is still an appreciable large diffuse illumination, even at high opacities, so that photovoltaic operation is still possible. If the power system is to continue to generate power even on high-optical-opacity (i.e., dusty atmosphere) days, it is important that the photovoltaic system be designed to collect diffuse irradiance as well as direct. Energy storage will be required for operation during the night. Temperature and wind provide additional considerations for array design.

  12. Design of Flight Vehicle Management Systems

    Science.gov (United States)

    Meyer, George; Aiken, Edwin W. (Technical Monitor)

    1994-01-01

    As the operation of large systems becomes ever more dependent on extensive automation, the need for an effective solution to the problem of design and validation of the underlying software becomes more critical. Large systems possess much detailed structure, typically hierarchical, and they are hybrid. Information processing at the top of the hierarchy is by means of formal logic and sentences; on the bottom it is by means of simple scalar differential equations and functions of time; and in the middle it is by an interacting mix of nonlinear multi-axis differential equations and automata, and functions of time and discrete events. The lecture will address the overall problem as it relates to flight vehicle management, describe the middle level, and offer a design approach that is based on Differential Geometry and Discrete Event Dynamic Systems Theory.

  13. From Social Simulation to Integrative System Design

    CERN Document Server

    Helbing, Dirk

    2010-01-01

    As the recent financial crisis showed, today there is a strong need to gain "ecological perspective" of all relevant interactions in socio-economic-techno-environmental systems. For this, we suggested to set-up a network of Centers for integrative systems design, which shall be able to run all potentially relevant scenarios, identify causality chains, explore feedback and cascading effects for a number of model variants, and determine the reliability of their implications (given the validity of the underlying models). They will be able to detect possible negative side effect of policy decisions, before they occur. The Centers belonging to this network of Integrative Systems Design Centers would be focused on a particular field, but they would be part of an attempt to eventually cover all relevant areas of society and economy and integrate them within a "Living Earth Simulator". The results of all research activities of such Centers would be turned into informative input for political Decision Arenas. For exam...

  14. Design of safeguards systems for authentication

    International Nuclear Information System (INIS)

    To permit valid conclusions to be drawn from safeguards data, it is essential that this data is known to be authentic. That is, it must be known that the data originated from the intended source, that the data was not changed in transit, and that it is not a repeat or delayed copy of previous data. Safeguards systems and equipment should be designed with authentication included, instead of attempting to add security later. Failure to integrate authentication measures early in the design results in systems that are expensive or possibly impossible to deploy securely. This paper gives some of the factors that should be considered and some of the methods that can be employed for ensuring high security while minimizing cost. The paper is a compilation of some of the lessons learned by the authors during many years of working with the authentication of these systems. (author)

  15. Optimum Design Of On Grid Pv System Using Tracking System

    Directory of Open Access Journals (Sweden)

    Saeed Mansour

    2015-05-01

    Full Text Available Abstract The fossil fuel is a main issue in the world due to the increase of fossil fuel cost and the depletion of the fossil fuel with continuous increasing demand on electricity. With continuous decrease of PV panels cost it is interesting to consider generation of electricity from PV system. To provide electric energy to a load in a remote area where electric grid utility is not available or connection with grid utility is available there are two approaches of photovoltaic system PV without tracking system Fixed System and PV with tracking systems. The result shows that the energy production by using PV with tracking system generates more energy in comparison with fixed panels system. However the cost per produced KWH is less in case of using fixed panels. This is the backbone in choice between two approaches of photovoltaic system. In this work a system design and cost analysis for two approaches of photovoltaic system are considered.

  16. The Anatomy of a Search and Mining System for Digital Archives

    OpenAIRE

    Harris, Martyn; Levene, Mark; Zhang,; Levene, Dan

    2016-01-01

    Samtla (Search And Mining Tools with Linguistic Analysis) is a digital humanities system designed in collaboration with historians and linguists to assist them with their research work in quantifying the content of any textual corpora through approximate phrase search and document comparison. The retrieval engine uses a character-based n-gram language model rather than the conventional word-based one so as to achieve great flexibility in language agnostic query processing. The index is implem...

  17. Modular HTGR systems design and cost summary

    International Nuclear Information System (INIS)

    This summary report describes conceptual designs and cost estimates for High Temperature Gas-Cooled Reactor (HTGR) plants based on the modular reactor concept as a source of process steam. Studies suggest that a modular reactor system (MRS) composed of a number of small, standardized, HTGR modules (which collectively meet the process heat users' requirements) might have some advantages relative to a single, large (monolithic) HTGR designed for the same capacity. This summarizes the designs of these MRS systems. The overall plant descriptions, arrangements, and layouts of the MRS-R and MRS-SC/C concepts are summarized. This inlcudes descriptions of the reactor core design and internals, major components, and balance of plant (BOP) design. Initial availability estimates as well as licensing and safety assessments of these MRS concepts are presented. Estimates of the plant capital, fuel cycle, operating and maintenance costs, and construction schedule are summarized. The technical issues which need be addressed for the development of the MRS concepts are highlighted. A discussion of the anticipated follow-on effort to these studies is presented

  18. System Identification, Environmental Modelling, and Control System Design

    CERN Document Server

    Garnier, Hugues

    2012-01-01

    System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

  19. The design of cloud workflow systems

    CERN Document Server

    Liu, Xiao; Zhang, Gaofeng

    2011-01-01

    Cloud computing is the latest market-oriented computing paradigm which brings software design and development into a new era characterized by ""XaaS"", i.e. everything as a service. Cloud workflows, as typical software applications in the cloud, are composed of a set of partially ordered cloud software services to achieve specific goals. However, due to the low QoS (quality of service) nature of the cloud environment, the design of workflow systems in the cloud becomes a challenging issue for the delivery of high quality cloud workflow applications. To address such an issue, this book presents

  20. Designing Flexible E-Business Workflow Systems

    Directory of Open Access Journals (Sweden)

    Cătălin Silvestru

    2010-01-01

    Full Text Available In today’s business environment organizations must cope with complex interactions between actors adapt fast to frequent market changes and be innovative. In this context, integrating knowledge with processes and Business Intelligenceis a major step towards improving organization agility. Therefore, traditional environments for workflow design have been adapted to answer the new business models and current requirements in the field of collaborative processes. This paper approaches the design of flexible and dynamic workflow management systems for electronic businesses that can lead to agility.

  1. Nuclear integrated database and design advancement system

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jae Joo; Jeong, Kwang Sub; Kim, Seung Hwan; Choi, Sun Young

    1997-01-01

    The objective of NuIDEAS is to computerize design processes through an integrated database by eliminating the current work style of delivering hardcopy documents and drawings. The major research contents of NuIDEAS are the advancement of design processes by computerization, the establishment of design database and 3 dimensional visualization of design data. KSNP (Korea Standard Nuclear Power Plant) is the target of legacy database and 3 dimensional model, so that can be utilized in the next plant design. In the first year, the blueprint of NuIDEAS is proposed, and its prototype is developed by applying the rapidly revolutionizing computer technology. The major results of the first year research were to establish the architecture of the integrated database ensuring data consistency, and to build design database of reactor coolant system and heavy components. Also various softwares were developed to search, share and utilize the data through networks, and the detailed 3 dimensional CAD models of nuclear fuel and heavy components were constructed, and walk-through simulation using the models are developed. This report contains the major additions and modifications to the object oriented database and associated program, using methods and Javascript.. (author). 36 refs., 1 tab., 32 figs.

  2. Nuclear integrated database and design advancement system

    International Nuclear Information System (INIS)

    The objective of NuIDEAS is to computerize design processes through an integrated database by eliminating the current work style of delivering hardcopy documents and drawings. The major research contents of NuIDEAS are the advancement of design processes by computerization, the establishment of design database and 3 dimensional visualization of design data. KSNP (Korea Standard Nuclear Power Plant) is the target of legacy database and 3 dimensional model, so that can be utilized in the next plant design. In the first year, the blueprint of NuIDEAS is proposed, and its prototype is developed by applying the rapidly revolutionizing computer technology. The major results of the first year research were to establish the architecture of the integrated database ensuring data consistency, and to build design database of reactor coolant system and heavy components. Also various softwares were developed to search, share and utilize the data through networks, and the detailed 3 dimensional CAD models of nuclear fuel and heavy components were constructed, and walk-through simulation using the models are developed. This report contains the major additions and modifications to the object oriented database and associated program, using methods and Javascript.. (author). 36 refs., 1 tab., 32 figs

  3. Software design for resilient computer systems

    CERN Document Server

    Schagaev, Igor

    2016-01-01

    This book addresses the question of how system software should be designed to account for faults, and which fault tolerance features it should provide for highest reliability. The authors first show how the system software interacts with the hardware to tolerate faults. They analyze and further develop the theory of fault tolerance to understand the different ways to increase the reliability of a system, with special attention on the role of system software in this process. They further develop the general algorithm of fault tolerance (GAFT) with its three main processes: hardware checking, preparation for recovery, and the recovery procedure. For each of the three processes, they analyze the requirements and properties theoretically and give possible implementation scenarios and system software support required. Based on the theoretical results, the authors derive an Oberon-based programming language with direct support of the three processes of GAFT. In the last part of this book, they introduce a simulator...

  4. Transnational Political Rights and Electoral Systems Design

    DEFF Research Database (Denmark)

    Elklit, Jørgen

    Voting from abroad is possible in slightly more than half of all countries, even though it may not be an option for all a country’s citizens permanently or temporarily out-of-country. This paper looks at the special electoral systems created for this purpose as it focuses on changes and innovations...... in electoral system design in order to cater for the special interests of diaspora voters. Most countries allowing voting from abroad simply includes the votes coming from out-of-country among the votes cast in-country, so no special electoral system has been invented or implemented. But at least 14...... countries have created exterritorial constituencies, where they in most cases basically use the same electoral system as they do for the ordinary in-country voting. The conclusion is that the creation of new electoral systems for voting from abroad has not – at least not so far – attracted a lot of interest...

  5. Systems engineering: application to VISTA design

    Science.gov (United States)

    Born, Andrew J.; Egan, Ian

    2004-09-01

    The high-performance nature of VISTA, the Visible & Infra-Red Survey Telescope for Astronomy, with its wide-field high-throughput f/1 optical design coupled with the multi-organisation, multi-disciplinary nature of the VISTA collaboration places significant demands on the project's Systems Engineering function. The project has relied heavily on a Systems Engineering approach, which has been vigorously applied throughout the conception, specification, and tendering stages of the project lifecycle, and is in place to be continued through the remaining phases of design & development, manufacture, assembly, commissioning, verification and acceptance. As the project matures from the Requirements/Design phase towards the Development and Manufacturing phase, the current status of the VISTA project is illustrated in terms of its Systems Engineering aspects, along with examples of how a formal Systems Engineering approach has resulted in benefits to the important project parameters of performance, cost and schedule. Key tools such as engineering budgets, configuration control procedures and the approach to risk management will be discussed in terms of their value to the project.

  6. Design of ITER NBI power supply system

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Kazuhiro; Ohara, Yoshihiro; Okumura, Yoshikazu [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Higa, Osamu; Kawashima, Syuichi; Ono, Youichi; Tanaka, Masanobu; Yasutomi, Sei

    1997-07-01

    Power supply system for the ITER neutral beam injector (NBI) whose total injection power is 1 MeV, 50 MW from three modules, has been designed. The power supply system consists of a source power supply for negative ion production/extraction and a DC 1 MV, 45 A power supply for negative ion acceleration. An inverter controlled multi-transformer/rectifier system has been adopted to the acceleration power supply. An inverter frequency of 150 Hz was selected to satisfy required specifications which are rise time of <100 ms, voltage ripple of <10% peak to peak and cut off speed of <200{mu}s. It was confirmed that the rise time, the ripple and the cut off speed is about 50 ms, 7% and <200{mu}s respectively by computation. It was also confirmed that a surge current and an energy input to the ion source at the breakdown can be suppressed lower than 3 kA and 10 J, which are considered to be lower than allowable values. A 1 MV transmission line has been designed from a view point of electric field on the inner conductors and grounded conductor. The results from the design study indicate that all the required specification to the power supply system can be satisfied and that R and D on the transmission line is one of the most important subjects. (author)

  7. Ethical Issues in Network System Design

    Directory of Open Access Journals (Sweden)

    Duncan Langford

    1997-05-01

    Full Text Available Today, most desktop computers and PCs are networked that is, they have the ability to link to other machines, usually to access data and other information held remotely. Such machines may sometimes be connected directly to each other, as part of an office or company computer system. More frequently, however, connected machines are at a considerable distance from each other, typically connected through links to global systems such as the Internet, or World Wide Web (WWW. The networked machine itself may be anything from a powerful company computer with direct Internet connections, to a small hobbyist machine, accessing a bulletin board through telephone and modem. It is important to remember that, whatever the type or the location of networked machines, their access to the network, and the network itself, was planned and constructed following deliberate design considerations. In this paper I discuss some ways in which the technical design of computer systems might appropriately be influenced by ethical issues, and examine pressures on computer scientists and others to technically control network related actions perceived as 'unethical'. After examination of the current situation, I draw together the issues, and conclude by suggesting some ethically based recommendations for the future design of networked systems.

  8. Design and performances of JPCam actuator system

    Science.gov (United States)

    Casalta, Joan Manel; Canchado, Manuel; Molins, Albert; Redondo, Miguel; Tomàs, Albert; Catalan, Albert

    2014-07-01

    JPCam is designed to perform the Javalambre-PAU Astrophysical Survey (J-PAS), a photometric survey of the northern sky with the new JST telescope being constructed in the Observatorio Astrofísico of Javalambre in Spain by CEFCA (Centro de Estudios de Física del Cosmos de Aragón). SENER has been responsible for the design, manufacturing, verification and delivery of the JPCam Actuator System that will be installed between the Telescope and the cryogenic Camera Subsystem. The main function is to control the instrument position to guarantee the image quality required during observations in all field of view and compensate deformations produced by gravity and temperature changes. The paper summarizes the main aspects of the hexapod design and earliest information related of integration and performances tests results.

  9. Remote metrology system (RMS) design concept

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-19

    A 3D remote metrology system (RMS) is needed to map the interior plasma-facing components of the International Thermonuclear Experimental Reactor (ITER). The performance and survival of these components within the reactor vessel are strongly dependent on their precise alignment and positioning with respect to the plasma edge. Without proper positioning and alignment, plasma-facing surfaces will erode rapidly. A RMS design involving Coleman Research Corporation (CRC) fiber optic coherent laser radar (CLR) technology is examined in this study. The fiber optic CLR approach was selected because its high precision should be able to meet the ITER 0.1 mm accuracy requirement and because the CLR`s fiber optic implementation allows a 3D scanner to operate remotely from the RMS system`s vulnerable components. This design study has largely verified that a fiber optic CLR based RMS can survive the ITER environment and map the ITER interior at the required accuracy at a one measurement/cm{sup 2} density with a total measurement time of less than one hour from each of six or more vertically deployed measurement probes. The design approach employs a sealed and pressurized measurement probe which is attached with an umbilical spiral bellows conduit. This conduit bears fiber optic and electronic links plus a stream of air to lower the temperature in the interior of the probe. Lowering the probe temperature is desirable because probe electromechanical components which could survive the radiation environment often were not rated for the 200 C temperature. The tip of the probe whose outer shell has a flexible bellows joint can swivel in two degrees of freedom to allow mapping operations at each probe deployment level. This design study has concluded that the most successful scanner design will involve a hybrid AO beam deflector and mechanical scanner.

  10. Management System of content in an organization of photo archive in Escambray Journal.

    Directory of Open Access Journals (Sweden)

    Mirelys Rodríguez Hernández

    2012-06-01

    Full Text Available This investigation is about resources management in photography and corrects environments to increase knowledge of them in the journal office. The study was carried out in the entity mentioned before in the period from January to December 2010, this was made in two steps. In the first was made an observational study to identify the requirements of management system to support the service of photography and the second one was the local design as a space management for publishing, share and access to information. In the initial diagnosis was found the need of a system capable to manage the sources of photos in the Center. For the development of platform was considered the interactive models multidirectional in communication. It was analyzed the possibilities that bring the Management System of Content for Cuban journals. The Site was implementing with Zope/Plone, a server of application oriented towards objects, as free instruments for the generation of web portals.

  11. Design of RF Power System for CPHS

    Science.gov (United States)

    Cheng, Cheng; Du, Taibin; Guan, Xialing

    The Compact Pulsed Hadron Source (CPHS) system has been proposed and designed by the Department of Engineering Physics of Tsinghua University in Beijing, China. It consists of an accelerator front-end-a highintensity ion source, a 3 MeV radiofrequency quadrupole linac (RFQ), and a 13 MeV drift-tube linac (DTL), a neutron target station, and some experimental stations. In design of our RF power supply, both RFQ and DTL share a single klystron which is capable of 2.5 MW peak RF power and a 3.33% duty factor. The 325 MHz klystron contains a modulating anode and has a 100 kW average output power. Portions of the RF power system, such as pulsed high voltage power supply, modulator, crowbar protection and RF power transmission are all presented in details in this paper.

  12. Designing Inclusive Systems Designing Inclusion for Real-world Applications

    CERN Document Server

    Clarkson, John; Robinson, Peter; Lazar, Jonathan; Heylighen, Ann

    2012-01-01

    The Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) are a series of workshops held at a Cambridge University College every two years. The workshop theme: “Designing inclusion for real-world applications” refers to the emerging potential and relevance of the latest generations of inclusive design thinking, tools, techniques, and data, to mainstream project applications such as healthcare and the design of working environments. Inclusive Design Research involves developing tools and guidance enabling product designers to design for the widest possible population, for a given range of capabilities. There are five main themes: •Designing for the Real-World •Measuring Demand And Capabilities •Designing Cognitive Interaction with Emerging Technologies •Design for Inclusion •Designing Inclusive Architecture In the tradition of CWUAAT, we have solicited and accepted contributions over a wide range of topics, both within individual themes and also across the workshop’s scope. ...

  13. Imaging system design for improved information capacity

    Science.gov (United States)

    Fales, C. L.; Huck, F. O.; Samms, R. W.

    1984-01-01

    Shannon's theory of information for communication channels is used to assess the performance of line-scan and sensor-array imaging systems and to optimize the design trade-offs involving sensitivity, spatial response, and sampling intervals. Formulations and computational evaluations account for spatial responses typical of line-scan and sensor-array mechanisms, lens diffraction and transmittance shading, defocus blur, and square and hexagonal sampling lattices.

  14. Controller Design Considerations for ACM APFC Systems

    Directory of Open Access Journals (Sweden)

    Alexander Abramovitz

    2012-01-01

    Full Text Available This paper is concerned with performance of the current shaping network in Average Current Mode (ACM Active Power Factor Correction (APFC systems. Theoretical expressions for the ripple components are derived. Then, ripple interaction and impact on the current loop reference signal are investigated. A modification of the controller network is suggested that results in an improved Total Harmonic Distortion (THD. Design guidelines are suggested. The theoretical predictions were validated by simulation.

  15. Information systems for interactive learning: Design perspective

    OpenAIRE

    Sabry, K; Alshawi, S

    2008-01-01

    This paper aims to present and discuss educational issues and relevant research to universities and colleges in the Arabian Gulf Region. This include cultural, students’ learning preferences and the use of information and communication technology. It particularly focuses on interactive learning through the consideration of learning styles. It explores the sequential-global learning styles profile of undergraduate students as part of a continuous research in Information Systems design with a p...

  16. Designing Systems in an Organizational Context

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    This dissertation is concerned with the early part of systems design, the purpose of which is that users and their managers can decide which computer-based systems are needed and relevant, and how they can be provided, i.e. purchased, and/or developed, and implemented, in a specific organization...... developing methodological guidelines, heuristics, or "rules of thumb". This involves organizational issues comprising of social, political, and managerial/strategical aspects within the organization. I have carried out action research over a period of 1 1/2 years in a public organization in Northern Europe...

  17. Design of Wind Turbine Vibration Monitoring System

    Directory of Open Access Journals (Sweden)

    Shoubin Wang

    2013-04-01

    Full Text Available In order to ensure safety of wind turbine operation and to reduce the occurrence of faults as well as to improve the reliability of wind turbine operation, a vibration monitoring for wind turbine is developed. In this paper, it analyses the enlargement of all the parts of the structure and the working mechanism, the research method of wind turbine operation vibration is introduced, with the focus being the use of the sensor principle. Finally the hardware design and software of this system is introduced and the main function of this system is described, which realizes condition monitoring of the work state of wind turbines.

  18. Propagation handbook for wireless communication system design

    CERN Document Server

    Crane, Robert K

    2003-01-01

    PROPAGATION PHENOMENA AFFECTING WIRELESS SYSTEMS Types of SystemsDesign Criteria Antenna Considerations Propagation Effects Propagation Models Model Verification Statistics and RiskList of Symbols ReferencesPROPAGATION FUNDAMENTALSMaxwell's EquationsPlane Waves Spherical Waves Reflection and Refraction Geometrical OpticsRay TracingScalar Diffraction Theory Geometrical Theory of Diffraction List of Symbols ReferencesABSORPTION Molecular Absorption Absorption on a Slant Path ACTS Statistics List of Symbols ReferencesREFRACTION Ray BendingPath Delay ScintillationList of Symbols ReferencesATTENUAT

  19. CONTROLLER DESIGN FOR HYBRID POWER SYSTEMS

    OpenAIRE

    N. Prabhu; R.Balraj,; S.Ayyubh

    2015-01-01

    In this paper an efficient design along with modeling and simulation of a transformer-less small-scale centralized AC—bus Connected Hybrid (Wind–PV) power system for supplying electric power to a single phase load. The main components of the hybrid system are: a PV generator (PVG); and an array of horizontal-axis, fixed pitch, small-size, variable-speed wind turbines (WTs) with direct-driven permanent magnet synchronous generator (PMSG) having an embedded uncontrolled bridge recti...

  20. Preliminary Systems Design Study assessment report

    International Nuclear Information System (INIS)

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept

  1. Preliminary systems design study assessment report

    International Nuclear Information System (INIS)

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept

  2. Design Aspects of Wet Scrubber System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun-Chul; Bang, Young-suk; Jung, Woo-Young; Lee, Doo-Yong [FNC Technology Co. Ltd., Yongin (Korea, Republic of)

    2015-10-15

    The water pool in the wet scrubber system has advantage to cope with decay heat based on the thermal hydraulic balance such as condensation and evaporation inside it. This study focuses on the design aspects of the wet scrubber system to estimate the required water pool mass during the mission time and size of the scrubbing tank including inner structures. The design of the wet scrubber system include the estimation of the required water mass during the mission time and sizing of the scrubber vessel to contain the water pool. The condensation due to the inlet steam and evaporation due to the steam and non-condensable gas superheat and decay heat from filtered fission products should be considered to estimate the water mass required to maintain its function during the mission time. On the other hand, the level swelling due to the noncondensable gas is another important design aspect on the sizing of the scrubber vessel and determination of the entry elevation of the filtration components such as the droplet separator or filter. The minimum water level based on the minimum collapsed water level should be higher than the exit of scrubber nozzle.

  3. Optimal Ground Source Heat Pump System Design

    Energy Technology Data Exchange (ETDEWEB)

    Ozbek, Metin [ENVIRON; Yavuzturk, Cy [University of Hartford; Pinder, George [University of Vermont

    2015-04-15

    Despite the facts that GSHPs first gained popularity as early as the 1940’s and they can achieve 30 to 60 percent in energy savings and carbon emission reductions relative to conventional HVAC systems, the use of geothermal energy in the U.S. has been less than 1 percent of the total energy consumption. The key barriers preventing this technically-mature technology from reaching its full commercial potential have been its high installation cost and limited consumer knowledge and trust in GSHP systems to deliver the technology in a cost-effective manner in the market place. Led by ENVIRON, with support from University Hartford and University of Vermont, the team developed and tested a software-based a decision making tool (‘OptGSHP’) for the least-cost design of ground-source heat pump (‘GSHP’) systems. OptGSHP combines state of the art optimization algorithms with GSHP-specific HVAC and groundwater flow and heat transport simulation. The particular strength of OptGSHP is in integrating heat transport due to groundwater flow into the design, which most of the GSHP designs do not get credit for and therefore are overdesigned.

  4. Basic design principles of colorimetric vision systems

    Science.gov (United States)

    Mumzhiu, Alex M.

    1998-10-01

    Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

  5. Advanced design of local ventilation systems

    Energy Technology Data Exchange (ETDEWEB)

    Kulmala, I. [VTT Manufacturing Technology, Espoo (Finland). Safety Technology

    1997-12-31

    Local ventilation is widely used in industry for controlling airborne contaminants. However, the present design practices of local ventilation systems are mainly based on empirical equations and do not take quantitatively into account the various factors affecting the performance of these systems. The aim of this study was to determine the applicability and limitations of more advanced fluid mechanical methods to the design and development of local ventilation systems. The most important factors affecting the performance of local ventilation systems were determined and their effect was studied in a systematic manner. The numerical calculations were made with the FLUENT computer code and they were verified by laboratory experiments, previous measurements or analytical solutions. The results proved that the numerical calculations can provide a realistic simulation of exhaust openings, effects of ambient air flows and wake regions. The experiences with the low-velocity local supply air showed that these systems can also be modelled fairly well. The results were used to improve the efficiency and thermal comfort of a local ventilation unit and to increase the effective control range of exhaust hoods. In the simulation of the interaction of a hot buoyant source and local exhaust, the predicted capture efficiencies were clearly higher than those observed experimentally. The deviations between measurements and non-isothermal flow calculations may have partly been caused by the inability to achieve grid independent solutions. CFD simulations is an advanced and flexible tool for designing and developing local ventilation. The simulations can provide insight into the time-averaged flow field which may assist us in understanding the observed phenomena and to explain experimental results. However, for successful calculations the applicability and limitations of the models must be known. (orig.) 78 refs.

  6. Nova control system: goals, architecture, and system design

    International Nuclear Information System (INIS)

    The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered

  7. Nova control system: goals, architecture, and system design

    Energy Technology Data Exchange (ETDEWEB)

    Suski, G.J.; Duffy, J.M.; Gritton, D.G.; Holloway, F.W.; Krammen, J.R.; Ozarski, R.G.; Severyn, J.R.; Van Arsdall, P.J.

    1982-05-19

    The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered.

  8. Complex Systems Design & Management : Proceedings of the Third International Conference on Complex Systems Design & Management

    CERN Document Server

    Caseau, Yves; Krob, Daniel; Rauzy, Antoine

    2013-01-01

    This book contains all refereed papers that were accepted to the third edition of the « Complex Systems Design & Management » (CSD&M 2012) international conference that took place in Paris (France) from December 12-14, 2012. (Website: http://www.csdm2012.csdm.fr)  These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture& engineering, systems metrics & quality, systemic  tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSD&M 2012 conference is organized under the guidance of the CESAMES non-profit organization (http://www.cesames.net).

  9. Complex Systems Design & Management : Proceedings of the Second International Conference on Complex Systems Design & Management

    CERN Document Server

    Krob, Daniel; Voirin, Jean-Luc

    2012-01-01

    This book contains all refereed papers that were accepted to the second edition of the « Complex Systems Design & Management » (CSDM 2011) international conference that took place in Paris (France) from December 7 to December 9, 2011. (Website: http://www.csdm2011.csdm.fr/). These proceedings cover the most recent trends in the emerging field of complex systems sciences & practices from an industrial and academic perspective, including the main industrial domains (transport, defense & security, electronics, energy & environment, e-services), scientific & technical topics (systems fundamentals, systems architecture& engineering, systems metrics & quality, systemic  tools) and system types (transportation systems, embedded systems, software & information systems, systems of systems, artificial ecosystems). The CSDM 2011 conference is organized under the guidance of the CESAMES non-profit organization (http://www.cesames.net/).

  10. Cold Vacuum Drying Instrument Air System Design Description. System 12

    International Nuclear Information System (INIS)

    This system design description (SDD) addresses the instrument air (IA) system of the spent nuclear fuel (SNF). This IA system provides instrument quality air to the Cold Vacuum Drying (CVD) Facility. The IA system is a general service system that supports the operation of the heating, ventilation, and air conditioning (HVAC) system, the process equipment skids, and process instruments in the CVD Facility. The following discussion is limited to the compressor, dryer, piping, and valving that provide the IA as shown in Drawings H-1-82222, Cold Vacuum Drying Facility Mechanical Utilities Compressed and Instrument Air PandID, and H-1.82161, Cold Vacuum Drying Facility Process Equipment Skid PandID MCO/Cusk Interface. Figure 1-1 shows the physical location of the 1A system in the CVD Facility

  11. System design and control integration for advanced manufacturing

    CERN Document Server

    Li, Han-Xiong

    2014-01-01

    Most existing robust design books address design for static systems, or achieve robust design from experimental data via the Taguchi method. Little work considers model information for robust design particularly for the dynamic system. This book covers robust design for both static and dynamic systems using the nominal model information or the hybrid model/data information, and also integrates design with control under a large operating region. This design can handle strong nonlinearity and more uncertainties from model and parameters.

  12. Preliminary Systems Design Study assessment report

    International Nuclear Information System (INIS)

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. This volume of the Systems Design Study contain four Appendixes that were part of the study. Appendix A is an EG ampersand G Idaho, Inc., report that represents a review and compilation of previous reports describing the wastes and quantities disposed in the Subsurface Disposal Area of the Idaho National Engineering Laboratory. Appendix B contains the process flowsheets considered in this study, but not selected for detailed analysis. Appendix C is a historical tabulation of radioactive waste incinerators. Appendix D lists Department of Energy facilities where cementation stabilization systems have been used

  13. Designing a Secure Point-of-Sale System

    DEFF Research Database (Denmark)

    Sharp, Robin; Pedersen, Allan; Hedegaard, Anders

    2006-01-01

    This paper describes some experiences with using the ''Common Criteria for Information Security Evaluation'' as the basis for a design methodology when designing secure systems. As an example, the design process for a Point-of-Sale (POS) system is described.......This paper describes some experiences with using the ''Common Criteria for Information Security Evaluation'' as the basis for a design methodology when designing secure systems. As an example, the design process for a Point-of-Sale (POS) system is described....

  14. Visualizing archives: Spanish archives map

    OpenAIRE

    Colmenero-Ruiz, María-Jesús

    2016-01-01

    The 2014/2015 academic year was the first to be taught the Master in Archives, Records Management and Digital Continuity at the University Carlos III Madrid, based on a blended learning model of attendance. This article describes the implementation of a visualization project based on geolocation of Spanish archives and its justification. The project arose from an optional practice proposed to the students of the subject “Re-use of data and documents” of this master course. This subject is opt...

  15. Tailoring superradiance to design artificial quantum systems

    Science.gov (United States)

    Longo, Paolo; Keitel, Christoph H.; Evers, Jörg

    2016-03-01

    Cooperative phenomena arising due to the coupling of individual atoms via the radiation field are a cornerstone of modern quantum and optical physics. Recent experiments on x-ray quantum optics added a new twist to this line of research by exploiting superradiance in order to construct artificial quantum systems. However, so far, systematic approaches to deliberately design superradiance properties are lacking, impeding the desired implementation of more advanced quantum optical schemes. Here, we develop an analytical framework for the engineering of single-photon superradiance in extended media applicable across the entire electromagnetic spectrum, and show how it can be used to tailor the properties of an artificial quantum system. This “reverse engineering” of superradiance not only provides an avenue towards non-linear and quantum mechanical phenomena at x-ray energies, but also leads to a unified view on and a better understanding of superradiance across different physical systems.

  16. Tailoring superradiance to design artificial quantum systems.

    Science.gov (United States)

    Longo, Paolo; Keitel, Christoph H; Evers, Jörg

    2016-03-24

    Cooperative phenomena arising due to the coupling of individual atoms via the radiation field are a cornerstone of modern quantum and optical physics. Recent experiments on x-ray quantum optics added a new twist to this line of research by exploiting superradiance in order to construct artificial quantum systems. However, so far, systematic approaches to deliberately design superradiance properties are lacking, impeding the desired implementation of more advanced quantum optical schemes. Here, we develop an analytical framework for the engineering of single-photon superradiance in extended media applicable across the entire electromagnetic spectrum, and show how it can be used to tailor the properties of an artificial quantum system. This "reverse engineering" of superradiance not only provides an avenue towards non-linear and quantum mechanical phenomena at x-ray energies, but also leads to a unified view on and a better understanding of superradiance across different physical systems.

  17. Designing Microporus Carbons for Hydrogen Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Alan C. Cooper

    2012-05-02

    An efficient, cost-effective hydrogen storage system is a key enabling technology for the widespread introduction of hydrogen fuel cells to the domestic marketplace. Air Products, an industry leader in hydrogen energy products and systems, recognized this need and responded to the DOE 'Grand Challenge' solicitation (DOE Solicitation DE-PS36-03GO93013) under Category 1 as an industry partner and steering committee member with the National Renewable Energy Laboratory (NREL) in their proposal for a center-of-excellence on Carbon-Based Hydrogen Storage Materials. This center was later renamed the Hydrogen Sorption Center of Excellence (HSCoE). Our proposal, entitled 'Designing Microporous Carbons for Hydrogen Storage Systems,' envisioned a highly synergistic 5-year program with NREL and other national laboratory and university partners.

  18. Preliminary systems design study assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1991-10-01

    The System Design Study (SDS), part of the Waste Technology Development Department of the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept. The SDS results are published in eight volumes. Volume I contains an executive summary. The SDS summary and analysis of results are presented in Volume II. Volumes III through VII contain descriptions of twelve system and four subsystem concepts. Volume VIII contains the appendixes.

  19. SAFARI optical system architecture and design concept

    Science.gov (United States)

    Pastor, Carmen; Jellema, Willem; Zuluaga-Ramírez, Pablo; Arrazola, David; Fernández-Rodriguez, M.; Belenguer, Tomás.; González Fernández, Luis M.; Audley, Michael D.; Evers, Jaap; Eggens, Martin; Torres Redondo, Josefina; Najarro, Francisco; Roelfsema, Peter

    2016-07-01

    SpicA FAR infrared Instrument, SAFARI, is one of the instruments planned for the SPICA mission. The SPICA mission is the next great leap forward in space-based far-infrared astronomy and will study the evolution of galaxies, stars and planetary systems. SPICA will utilize a deeply cooled 2.5m-class telescope, provided by European industry, to realize zodiacal background limited performance, and high spatial resolution. The instrument SAFARI is a cryogenic grating-based point source spectrometer working in the wavelength domain 34 to 230 μm, providing spectral resolving power from 300 to at least 2000. The instrument shall provide low and high resolution spectroscopy in four spectral bands. Low Resolution mode is the native instrument mode, while the high Resolution mode is achieved by means of a Martin-Pupplet interferometer. The optical system is all-reflective and consists of three main modules; an input optics module, followed by the Band and Mode Distributing Optics and the grating Modules. The instrument utilizes Nyquist sampled filled linear arrays of very sensitive TES detectors. The work presented in this paper describes the optical design architecture and design concept compatible with the current instrument performance and volume design drivers.

  20. The design of image stabilization control system

    Science.gov (United States)

    Lin, Zhe; Wu, Chunnan; Yu, Fei; Kang, Xiaojun

    2012-09-01

    For high resolution satellite remote sensing cameras, the line of sight (LOS) moving during the image exposure period will cause the modulation transfer function (MTF) degradation and image blurring. Image stabilization component is used to improve image quality by actively removing the apparent motion induced by vibration, tracking error and attitude instability. In this paper, the image stabilization component is considered as a kind of closed loop servo control system, and the image stabilization effect is converted into servo control performance for research. Firstly, the image stabilization servo loop scheme and transfer function model are constructed and the LOS jitter is considered as the output of a stochastic system derived by white-Gaussian noise. Based on the proposed model, the demand boundary of jitter rejection function is described, and the design criterion to be satisfied is obtained according to the requirement of image stabilization performance. And then, a discrete Kalman estimation algorithm is introduced into image stabilization servo loop to filter out the noise caused by pixel-shift sensor (PSS) and compensate for the delay due to the PSS measurement. Based on the given design criterion, the control law is designed by using the output of Kalman filter. The computer simulation is achieved to show that the proposed control strategy can significantly improve the image stabilization performance.