WorldWideScience

Sample records for architectural model transformations

  1. A Concept Transformation Learning Model for Architectural Design Learning Process

    Science.gov (United States)

    Wu, Yun-Wu; Weng, Kuo-Hua; Young, Li-Ming

    2016-01-01

    Generally, in the foundation course of architectural design, much emphasis is placed on teaching of the basic design skills without focusing on teaching students to apply the basic design concepts in their architectural designs or promoting students' own creativity. Therefore, this study aims to propose a concept transformation learning model to…

  2. Software Architecture Design : Evaluation and Transformation

    OpenAIRE

    Bosch, Jan; Molin, Peter

    1997-01-01

    Since the architecture of a software system constrains the non-functional requirements, the decisions taken during architectural design have a large impact in the resulting system. An architectural design method is presented that employs iterative evaluation and transformation of the software architecture in order to satisfy the non-functional requirements (NFRs). Architecture evaluation is performed by using scenarios, simulation, mathematical modelling and reasoning. The architecture can be...

  3. Adaptive Neuron Model: An architecture for the rapid learning of nonlinear topological transformations

    Science.gov (United States)

    Tawel, Raoul (Inventor)

    1994-01-01

    A method for the rapid learning of nonlinear mappings and topological transformations using a dynamically reconfigurable artificial neural network is presented. This fully-recurrent Adaptive Neuron Model (ANM) network was applied to the highly degenerate inverse kinematics problem in robotics, and its performance evaluation is bench-marked. Once trained, the resulting neuromorphic architecture was implemented in custom analog neural network hardware and the parameters capturing the functional transformation downloaded onto the system. This neuroprocessor, capable of 10(exp 9) ops/sec, was interfaced directly to a three degree of freedom Heathkit robotic manipulator. Calculation of the hardware feed-forward pass for this mapping was benchmarked at approximately 10 microsec.

  4. Transforming security audit requirements into a software architecture

    OpenAIRE

    Yskout, Koen; De Win, Bart; Joosen, Wouter

    2008-01-01

    In this paper, an approach for automated transformations from a security requirements model to a consistent architectural model is presented. The approach can be used with an existing architectural model, and allows input from the architect to be taken into account. The transformation from audit requirements into a UML model is implementated using QVT and Eclipse EMF, and is illustrated by means of a small case study.

  5. Lived modernism: when architecture transforms

    OpenAIRE

    le Roux, Hannah

    2014-01-01

    Lived modernism explores the moments when architecture changes. Inspired by my first hand experience of the contemporary reuse, in Africa and beyond, of spaces constructed during modernism, specifically from 1945 to 1975, it works to extract approaches and concepts applicable to the contemporary practice of architecture. Modernist space, despite its deterministic intentions, becomes open at the moment of appropriation by emergent social practices. This lived modernism can find an analogy in d...

  6. Managing Separation of Concerns in Grid Applications Through Architectural Model Transformations

    CERN Document Server

    Manset, David; McClatchey, Richard

    2007-01-01

    Grids enable the aggregation, virtualization and sharing of massive heterogeneous and geographically dispersed resources, using files, applications and storage devices, to solve computation and data intensive problems, across institutions and countries via temporary collaborations called virtual organizations (VO). Most implementations result in complex superposition of software layers, often delivering low quality of service and quality of applications. As a consequence, Grid-based applications design and development is increasingly complex, and the use of most classical engineering practices is unsuccessful. Not only is the development of such applications a time-consuming, error prone and expensive task, but also the resulting applications are often hard-coded for specific Grid configurations, platforms and infra-structures. Having neither guidelines nor rules in the design of a Grid-based application is a paradox since there are many existing architectural approaches for distributed computing, which could...

  7. Fourier transform spectrometer controller for partitioned architectures

    Science.gov (United States)

    Tamas-Selicean, D.; Keymeulen, D.; Berisford, D.; Carlson, R.; Hand, K.; Pop, P.; Wadsworth, W.; Levy, R.

    The current trend in spacecraft computing is to integrate applications of different criticality levels on the same platform using no separation. This approach increases the complexity of the development, verification and integration processes, with an impact on the whole system life cycle. Researchers at ESA and NASA advocated for the use of partitioned architecture to reduce this complexity. Partitioned architectures rely on platform mechanisms to provide robust temporal and spatial separation between applications. Such architectures have been successfully implemented in several industries, such as avionics and automotive. In this paper we investigate the challenges of developing and the benefits of integrating a scientific instrument, namely a Fourier Transform Spectrometer, in such a partitioned architecture.

  8. Fourier Transform Spectrometer Controller for Partitioned Architectures

    DEFF Research Database (Denmark)

    Tamas-Selicean, Domitian; Keymeulen, D.; Berisford, D.; Carlson, R.; Hand, K.; Pop, Paul; Wadsworth, W.; Levy, R.

    2013-01-01

    The current trend in spacecraft computing is to integrate applications of different criticality levels on the same platform using no separation. This approach increases the complexity of the development, verification and integration processes, with an impact on the whole system life cycle......, such as avionics and automotive. In this paper we investigate the challenges of developing and the benefits of integrating a scientific instrument, namely a Fourier Transform Spectrometer, in such a partitioned architecture....

  9. Architectural Decision Management for Digital Transformation of Products and Services

    Directory of Open Access Journals (Sweden)

    Alfred Zimmermann

    2016-04-01

    Full Text Available The digitization of our society changes the way we live, work, learn, communicate, and collaborate. The Internet of Things, Enterprise Social Networks, Adaptive Case Management, Mobility systems, Analytics for Big Data, and Cloud services environments are emerging to support smart connected products and services and the digital transformation. Biological metaphors of living and adaptable ecosystems provide the logical foundation for self-optimizing and resilient run-time environments for intelligent business services and service-oriented enterprise architectures. Our aim is to support flexibility and agile transformations for both business domains and related information technology. The present research paper investigates mechanisms for decision analytics in the context of multi-perspective explorations of enterprise services and their digital enterprise architectures by extending original architecture reference models with state of art elements for agile architectural engineering for the digitization and collaborative architectural decision support. The paper’s context focuses on digital transformations of business and IT and integrates fundamental mappings between adaptable digital enterprise architectures and service-oriented information systems. We are putting a spotlight on the example domain – Internet of Things.

  10. Models of Architecture

    OpenAIRE

    Pelcat, Maxime; Desnos, Karol; Maggiani, Luca; Liu, Yanzhou; Heulot, Julien; Nezan, Jean-François; Bhattacharyya, Shuvra S.

    2015-01-01

    The current trend in high performance and embedded computing consists of designing increasingly complex heterogeneous hardware architectures with non-uniform communication resources. In order to take hardware and software design decisions, early evaluations of the system non-functional properties are needed. These evaluations of system efficiency require high-level information on both the algorithms and the architecture. In state of the art Model Driven Engineering (MDE) methods, different co...

  11. Constraint-Preserving Architecture Transformations: A Graph Rewriting Approach

    Institute of Scientific and Technical Information of China (English)

    YUAN Chun; CHEN Yiyun

    2001-01-01

    Architecture transformations are frequently performed during software design and maintenance. However this activity is not well supported at a sufficiently abstract level.In this paper, the authors characterize architecture transformations using graph rewriting rules,where architectures are represented in graph notations. Architectures are usually required to satisfy certain constraints during evolution. Therefore a way is presented to construct the sufficient and necessary condition for a transformation to preserve a constraint. The condition can be verified before the application of the transformation. Validated transformations are guaranteed not to violate corresponding constraints whenever applied.

  12. Consistent model driven architecture

    Science.gov (United States)

    Niepostyn, Stanisław J.

    2015-09-01

    The goal of the MDA is to produce software systems from abstract models in a way where human interaction is restricted to a minimum. These abstract models are based on the UML language. However, the semantics of UML models is defined in a natural language. Subsequently the verification of consistency of these diagrams is needed in order to identify errors in requirements at the early stage of the development process. The verification of consistency is difficult due to a semi-formal nature of UML diagrams. We propose automatic verification of consistency of the series of UML diagrams originating from abstract models implemented with our consistency rules. This Consistent Model Driven Architecture approach enables us to generate automatically complete workflow applications from consistent and complete models developed from abstract models (e.g. Business Context Diagram). Therefore, our method can be used to check practicability (feasibility) of software architecture models.

  13. Customisable transformation-driven evolution for service architectures

    OpenAIRE

    Ahmad, Aakash; Pahl, Claus

    2011-01-01

    Service-based architectures have now become commonplace, creating the need to address their systematic maintenance and evolution. We propose to enable transformation-driven evolution for service architectures in a semi-automated fashion. In contrast to the existing solutions like service wrapping, migration or run-time adaptation etc., the proposal supports primitive and customisable architectural transformations to support an incremental evolution for service architectures. An empir...

  14. Architecture of Discrete Wavelet Transform Processor for Image Compression

    OpenAIRE

    Ms. Yamini S.Bute; Ms. Indu Mandawi; Ms. Sarita Sakure

    2013-01-01

    Image compression is one of the major image processing techniques. Discrete wavelet transformsis the most popular transformation technique adopted for image compression. This paper presents anefficient VLSI architecture of a high speed, low power 2-D Discrete Wavelet Transform computing. Thereare number of architectures are present for realizing DWT. Based on the application and the constraintsimposed, the appropriate architecture can be chosen. Proposed DWT architecture uses Harrtransformati...

  15. Avionics Architecture Modelling Language

    Science.gov (United States)

    Alana, Elena; Naranjo, Hector; Valencia, Raul; Medina, Alberto; Honvault, Christophe; Rugina, Ana; Panunzia, Marco; Dellandrea, Brice; Garcia, Gerald

    2014-08-01

    This paper presents the ESA AAML (Avionics Architecture Modelling Language) study, which aimed at advancing the avionics engineering practices towards a model-based approach by (i) identifying and prioritising the avionics-relevant analyses, (ii) specifying the modelling language features necessary to support the identified analyses, and (iii) recommending/prototyping software tooling to demonstrate the automation of the selected analyses based on a modelling language and compliant with the defined specification.

  16. Transformation of artistic ideas of visual art into architectural space

    Directory of Open Access Journals (Sweden)

    Enyutina Ekaterina Dmitrievna

    2014-04-01

    Full Text Available Transformation of a two-dimensional composition into a volumetric and spatial solution is based on the abstract art painting. Theoretical part of the style of the twenties laid the basic groundwork for this solution. The group "Unovis" under the supervision of Malevich aimed to create the "Suprematic Utilitarian World": the development of a new architecture, a new ornament and new forms of furniture, as well as a new type of a modern book. The theory of P. Mondrian and the group "Style" had a tremendous effect on the architecture of the twentieth century, and first of all due to the “Bauhaus” school of design, that clearly represented the rationalistic principles of architecture. Originated in art a new understanding of the material world was reflected in architecture in the most striking and decisive manner. It can be illustrated by the example of modern prominent architects who also use the methods created by artists of the early twentieth century. For example, a designer and architect Zaha Hadid uses this method in many of her projects. When modeling her future projects she designs a volumetric and spatial conceptual model - composition of desired architectural space, using suprematic composition as a basis. Modeling method makes it possible to solve a range of problems competently and methodically interesting. Their solution is necessary for the architectural practice, conceptual design and training. Among the tasks lying "on the surface" of architectural creativity we can emphasize the following: 1. Abstracting. The aim is to design a volumetric and spatial conceptual model - a composition of desired architectural space, which will reflect reality from a new angle. 2. Conceptualization allows to reveal the main idea, the basic concept, the design principle in artistic activity, to investigate the conditions of functioning and aesthetic perception of architectural work in general. 3. Defining the structure and variability in the modular

  17. Transformative pedagogy in architecture and urbanism [Ashraf Salama

    OpenAIRE

    Elnokaly, Amira

    2010-01-01

    This is rather an interesting book on pedagogy in architectural and urban education by Ashraf M. Salama. Transformative Pedagogy in Architecture and Urbanism represents a new cycle of pedagogical debate on architecture and urbanism, setting the stage for debating future visions of transformative pedagogy and its impact on design education. Publisher: UMBAU VERLAG, Paperback: 208 pages including illustrations, Solingen, Germany 2009 ISBN 978-3937954-042

  18. Tourists' Transformation Experience: From Destination Architecture to Identity Formation

    DEFF Research Database (Denmark)

    Ye, Helen Yi; Tussyadiah, Iis

    2010-01-01

    Today’s tourists seek unique destinations that could associate with their self identity in a profound way. It is meaningful for destinations to design unique physical elements that offer transformational travel experiences. This study aims at identifying how tourists encounter architecture in a...... destination and if architecture facilitates tourists’ self transformation. Based on narrative structure analysis by deconstruction of travel blog posts, the results suggest that tourists perceive architectural landscape as an important feature that reflects destinations’ identity. Four different interaction...

  19. Evaluating software architecture using fuzzy formal models

    Directory of Open Access Journals (Sweden)

    Payman Behbahaninejad

    2012-04-01

    Full Text Available Unified Modeling Language (UML has been recognized as one of the most popular techniques to describe static and dynamic aspects of software systems. One of the primary issues in designing software packages is the existence of uncertainty associated with such models. Fuzzy-UML to describe software architecture has both static and dynamic perspective, simultaneously. The evaluation of software architecture design phase initiates always help us find some additional requirements, which helps reduce cost of design. In this paper, we use a fuzzy data model to describe the static aspects of software architecture and the fuzzy sequence diagram to illustrate the dynamic aspects of software architecture. We also transform these diagrams into Petri Nets and evaluate reliability of the architecture. The web-based hotel reservation system for further explanation has been studied.

  20. Architectural Strategies of Transformation to Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    2015-01-01

    This dissertation addresses the topic of sustainable transformation of Modern housing in Denmark......This dissertation addresses the topic of sustainable transformation of Modern housing in Denmark...

  1. A method for valuing architecture-based business transformation and measuring the value of solutions architecture

    OpenAIRE

    Maes, R.; Dedene, G.; Slot, R.G.

    2010-01-01

    Enterprise and Solution Architecture are key in today’s business environment. It is surprising that the foundation and business case for these activities are nonexistent; the financial value for the business of these activities is largely undetermined. To determine business value of enterprise and solution architecture, this thesis shows how to measure and quantify, in business terms, the value of enterprise architecture-based on business transformation and the value of solution architecture.

  2. A catalog of architectural primitives for modeling architectural patterns

    NARCIS (Netherlands)

    Zdun, Uwe; Avgeriou, Paris

    2008-01-01

    Architectural patterns are a fundamental aspect of the architecting process and subsequently the architectural documentation. Unfortunately, there is only poor support for modeling architectural patterns for two reasons. First, patterns describe recurring design solutions and hence do not directly m

  3. Transformation of Minarets in Contemporary Mosque Architecture in Turkey

    OpenAIRE

    Özgür Ürey

    2013-01-01

    This study aims to explore the usage, the formal and functional transformation of minarets in contemporary mosque architecture in Turkey, through a survey of the selected cases. The selected cases are the outstanding examples of Turkish contemporary mosque architecture. Their architects are innovative in their design decisions and displayed their own design approach and interpretation outside the main stream contemporary mosque design in T...

  4. Architectural Knowledge. Transformations, transpositions and variations

    OpenAIRE

    Pacheco, Mónica

    2013-01-01

    The challenge of architecture is to focus on architecture itself — buildings, drawings, and models— as its locus of knowledge and, specifically, on how that knowledge can became a tool of the design process. One of the first attempts to do so, Précis and Recueil, appeared in the early nineteenth century elaborated by Durand. They represented the hinge for an epistemological validation of the discipline, taking further the Vitruvian axiom architectura est sciencia, and answering Enlightenme...

  5. Transforming Space Missions into Service Oriented Architectures

    Science.gov (United States)

    Mandl, Dan; Frye, Stuart; Cappelaere, Pat

    2006-01-01

    This viewgraph presentation reviews the vision of the sensor web enablement via a Service Oriented Architecture (SOA). An generic example is given of a user finding a service through the Web, and initiating a request for the desired observation. The parts that comprise this system and how they interact are reviewed. The advantages of the use of SOA are reviewed.

  6. Digital Architecture Planning Model

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Al Rashdan, Ahmad Yahya Mohammad [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Bly, Aaron Douglas [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Fitzgerald, Kirk [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS); Wilson, Keith Leon [Idaho National Lab. (INL), Idaho Falls, ID (United States). Light Water Reactor Sustainability Program (LWRS)

    2016-03-01

    As part of the U.S. Department of Energy’s Light Water Reactor Sustainability Program, the Digital Architecture (DA) Project focuses on providing a model that nuclear utilities can refer to when planning deployment of advanced technologies. The digital architecture planning model (DAPM) is the methodology for mapping power plant operational and support activities into a DA that unifies all data sources needed by the utilities to operate their plants. The DA is defined as a collection of information technology capabilities needed to support and integrate a wide spectrum of real-time digital capabilities for performance improvements of nuclear power plants. DA can be thought of as integration of the separate instrumentation and control and information systems already in place in nuclear power plants, which are brought together for the purpose of creating new levels of automation in plant work activities. A major objective in DAPM development was to survey all key areas that needed to be reviewed in order for a utility to make knowledgeable decisions regarding needs and plans to implement a DA at the plant. The development was done in two steps. First, researchers surveyed the nuclear industry in order to learn their near-term plans for adopting new advanced capabilities and implementing a network (i.e., wireless and wire) infrastructure throughout the plant, including the power block. Secondly, a literature review covering regulatory documents, industry standards, and technical research reports and articles was conducted. The objective of the review was to identify key areas to be covered by the DAPM, which included the following: 1. The need for a DA and its benefits to the plant 2. Resources required to implement the DA 3. Challenges that need to be addressed and resolved to implement the DA 4. Roles and responsibilities of the DA implementation plan. The DAPM was developed based on results from the survey and the literature review. Model development, including

  7. Transformation of Minarets in Contemporary Mosque Architecture in Turkey

    OpenAIRE

    Urey, Ozgur

    2013-01-01

    This study aims to explore the usage, the formal and functional transformation of minarets in contemporary mosque architecture in Turkey, through a survey of the selected cases. The selected cases are the outstanding examples of Turkish contemporary mosque architecture. Their architects are innovative in their design decisions and displayed their own design approach and interpretation outside the main stream contemporary mosque design in Turkey. In this study, six mosques for every decade beg...

  8. Transformation survival models

    OpenAIRE

    Yulia Marchenko

    2014-01-01

    The Cox proportional hazards model is one of the most popular methods for analyzing survival or failure-time data. The key assumption underlying the Cox model is that of proportional hazards. This assumption may often be violated in practice. Transformation survival models extend the Cox regression methodology to allow for nonproportional hazards. They represent the class of semiparametric linear transformation models, which relates an unknown transformation of the survival time linearly to c...

  9. Model Driven ArchitectureTM

    CERN Document Server

    Frankel, David S

    2003-01-01

    Model Driven Architecture MDA)is a new methodologyf rom OMG that uses modeling languages like UML along with programming languages like Java to build software architectures. PriceWatersCoopers' prestigious Technology Center just predicted that MDA will be one of the most important methodologies in the next two years Written by the lead architect of the specification who provides inside information on how MDA has worked in the real world

  10. Towards Approximate Model Transformations

    OpenAIRE

    Troya, Javier; Wimmer, Manuel; Vallecillo, Antonio; Burgueño, Loli

    2014-01-01

    As the size and complexity of models grow, there is a need to count on novel mechanisms and tools for transforming them. This is required, e.g., when model transformations need to provide target models without having access to the complete source models or in really short time—as it happens, e.g., with streaming models—or with very large models for which the transformation algorithms become too slow to be of practical use if the complete population of a model is investigated. In this pa...

  11. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    operational design and handling of production system architecture, research is conducted into the description of production system architecture, including what an architecture description contains in general and what it should describe for production systems specifically. The contribution in this area of...... research consists of three parts. First, a conceptual model of architecture descriptions is established based on the ISO/IEC/IEEE 42010 standard. Secondly, the stakeholders and architecture related concerns of relevance for descriptions of production system architectures are investigated, and requirements......The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...

  12. Six Sigma Driven Enterprise Model Transformation

    OpenAIRE

    Raymond Vella; Sekhar Chattopadhyay; John P.T. Mo

    2009-01-01

    Enterprise architecture methods provide a structured system to understand enterprise activities. However, existing enterprise modelling methodologies take static views of the enterprise and do not naturally lead to a path of improvement during enterprise model transformation. This paper discusses the need for a methodology to facilitate changes for improvement in an enterprise. The six sigma methodology is proposed as the tool to facilitate progressive and continual Enterprise Model Transform...

  13. Matrix-Vector Based Fast Fourier Transformations on SDR Architectures

    Directory of Open Access Journals (Sweden)

    Y. He

    2008-05-01

    Full Text Available Today Discrete Fourier Transforms (DFTs are applied in various radio standards based on OFDM (Orthogonal Frequency Division Multiplex. It is important to gain a fast computational speed for the DFT, which is usually achieved by using specialized Fast Fourier Transform (FFT engines. However, in face of the Software Defined Radio (SDR development, more general (parallel processor architectures are often desirable, which are not tailored to FFT computations. Therefore, alternative approaches are required to reduce the complexity of the DFT. Starting from a matrix-vector based description of the FFT idea, we will present different factorizations of the DFT matrix, which allow a reduction of the complexity that lies between the original DFT and the minimum FFT complexity. The computational complexities of these factorizations and their suitability for implementation on different processor architectures are investigated.

  14. Scalable low-complexity B-spline discretewavelet transform architecture

    OpenAIRE

    Martina, Maurizio; Masera, Guido; Piccinini, Gianluca

    2010-01-01

    A scalable discrete wavelet transform architecture based on the B-spline factorisation is presented. In particular, it is shown that several wavelet filters of practical interest have a common structure in the distributed part of their B-spline factorisation. This common structure is effectively exploited to achieve scalability and to save multipliers compared with a direct polyphase B-spline implementation. Since the proposed solution is more robust to coefficient quantisation than direct po...

  15. Investigation of Transformer Winding Architectures for High Voltage Capacitor Charging Applications

    DEFF Research Database (Denmark)

    Schneider, Henrik; Thummala, Prasanth; Huang, Lina;

    2014-01-01

    architecture, to an interleaved, sectionalized and bank winded architecture. The analytical results are evaluated experimentally and through FEM simulations. Different transformer winding architectures are investigated in terms of the losses caused by the transformer parasitics for a bidirectional high......Transformer parameters such as leakage inductance and self-capacitance are rarely calculated in advance during the design phase, because of the complexity and huge analytical error margins caused by practical winding implementation issues. Thus, choosing one transformer architecture over another...

  16. Enhancing Architectural Drawings and Models with Photoshop

    CERN Document Server

    Onstott, Scott

    2010-01-01

    Transform your CAD drawings into powerful presentationThis one-of-a-kind book shows you how to use Photoshop to turn CAD drawings and BIM models into artistic presentations with captivating animations, videos, and dynamic 3D imagery. The techniques apply to all leading architectural design software including AutoCAD, Revit, and 3ds Max Design. Video tutorials on the DVD improve your learning curve and let you compare your work with the author's.Turn CAD drawings and BIM models into powerful presentations featuring animation, videos, and 3D imagery for enhanced client appealCraft interactive pa

  17. Interoperability format translation and transformation between IFC architectural design file and simulation file formats

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Tian-Jy; Kim, Younghun

    2015-01-06

    Automatically translating a building architecture file format (Industry Foundation Class) to a simulation file, in one aspect, may extract data and metadata used by a target simulation tool from a building architecture file. Interoperability data objects may be created and the extracted data is stored in the interoperability data objects. A model translation procedure may be prepared to identify a mapping from a Model View Definition to a translation and transformation function. The extracted data may be transformed using the data stored in the interoperability data objects, an input Model View Definition template, and the translation and transformation function to convert the extracted data to correct geometric values needed for a target simulation file format used by the target simulation tool. The simulation file in the target simulation file format may be generated.

  18. HRST architecture modeling and assessments

    Science.gov (United States)

    Comstock, Douglas A.

    1997-01-01

    This paper presents work supporting the assessment of advanced concept options for the Highly Reusable Space Transportation (HRST) study. It describes the development of computer models as the basis for creating an integrated capability to evaluate the economic feasibility and sustainability of a variety of system architectures. It summarizes modeling capabilities for use on the HRST study to perform sensitivity analysis of alternative architectures (consisting of different combinations of highly reusable vehicles, launch assist systems, and alternative operations and support concepts) in terms of cost, schedule, performance, and demand. In addition, the identification and preliminary assessment of alternative market segments for HRST applications, such as space manufacturing, space tourism, etc., is described. Finally, the development of an initial prototype model that can begin to be used for modeling alternative HRST concepts at the system level is presented.

  19. Modelling enterprise architectures

    CERN Document Server

    Holt, Jon

    2010-01-01

    For any organisation to be successful in an increasingly competitive and global working environment, it is essential that there is a clear understanding of all aspects of the business. Given that no two organisations are exactly alike, there is no definitive understanding of exactly what these aspects are as they will depend on the organisation's nature, size and so on. Some of the aspects of the business that must be considered include: process models, process descriptions, competencies, standards, methodologies, infrastructure, people and business goals.

  20. Architectural Design Document for Camera Models

    DEFF Research Database (Denmark)

    Thuesen, Gøsta

    1998-01-01

    Architecture of camera simulator models and data interface for the Maneuvering of Inspection/Servicing Vehicle (MIV) study.......Architecture of camera simulator models and data interface for the Maneuvering of Inspection/Servicing Vehicle (MIV) study....

  1. Transformation of Minarets in Contemporary Mosque Architecture in Turkey

    Directory of Open Access Journals (Sweden)

    Özgür Ürey

    2013-12-01

    Full Text Available This study aims to explore the usage, the formal and functional transformation of minarets in contemporary mosque architecture in Turkey, through a survey of the selected cases. The selected cases are the outstanding examples of Turkish contemporary mosque architecture. Their architects are innovative in their design decisions and displayed their own design approach and interpretation outside the main stream contemporary mosque design in Turkey. In this study, six mosques for every decade begin ning from 1960‟s are analyzed in terms of their general architectural features, the usage and interpretation of minarets in their designs. Throughout the selected cases, the modification of forms and functions are studied and compared with the pre - modern o nes as well as with each other. The changed forms and functions of minarets and the introduction of new ideas to their design are also discussed. By this way, a general evaluation regarding the developments and progress in contemporary mosque architecture in Turkey is proposed with reference to comparative results. On this basis, this study demonstrates that the main elements, organization schemes and planning setups of Classical Ottoman Mosque are still preserved in the selected mosque examples. The novelty brought to their design is basically the usage of modern materials and techniques and a formal exploration of mosque design. This study claims that, architects of contemporary mosques in Turkey are in search for newness and innovation in t heir designs as a contribution for the progress of mosque architecture. This search for innovation has mostly leaded the architects to some atypical forms, although in some cases traditional solutions and standpoints have taken place.

  2. Transformation of artistic ideas of visual art into architectural space

    OpenAIRE

    Enyutina Ekaterina Dmitrievna

    2014-01-01

    Transformation of a two-dimensional composition into a volumetric and spatial solution is based on the abstract art painting. Theoretical part of the style of the twenties laid the basic groundwork for this solution. The group "Unovis" under the supervision of Malevich aimed to create the "Suprematic Utilitarian World": the development of a new architecture, a new ornament and new forms of furniture, as well as a new type of a modern book. The theory of P. Mondrian and the group "Style" had a...

  3. Models of novel battery architectures

    Science.gov (United States)

    Haney, Paul; Ruzmetov, Dmitry; Talin, Alec

    2013-03-01

    We use a 1-dimensional model of electronic and ionic transport, coupled with experimental data, to extract the interfacial electrochemical parameters for LiCoO2-LIPON-Si thin film batteries. TEM imaging of batteries has shown that charge/discharge cycles can lead to breakdown of the interfaces, which reduces the effective area through which further Li ion transfer can occur. This is modeled phenomenologically by changing the effective cross sectional area, in order to correlate this structural change with the change in charge/discharge I-V curves. Finally, by adopting the model to radial coordinates, the geometrical effect of nanowire architectures for batteries is investigated.

  4. The PASS project architectural model

    International Nuclear Information System (INIS)

    The PASS project has as its goal the implementation of solutions to the foreseen data access problems of the next generation of scientific experiments. The architectural model results from an evaluation of the operational and technical requirements and is described in terms of an abstract reference model, an implementation model and a discussion of some design aspects. The abstract reference model describes a system that matches the requirements in terms of its components and the mechanisms by which they communicate, but does not discuss policy or design issues that would be necessary to match the model to an actual implementation. Some of these issues are discussed, but more detailed design and simulation work will be necessary before choices can be made

  5. Experimental color encryption in a joint transform correlator architecture

    International Nuclear Information System (INIS)

    We present an experimental color image encryption by using a photorefractive crystal and a joint transform correlator (JTC) architecture. We achieve the color storing by changing the illumination wavelength. One JTC aperture has the input image information corresponding to a determined color channel bonded to a random phase mask (object aperture), and the other JTC aperture contains the key code mask. The joint power spectrum is stored in a photorefractive crystal. Each color data is stored as a modulation of birefringence in this photosensitive medium. The adequate wavelength change produces a corresponding power spectrum modification that avoids image encryption cross talk in the read out step. An analysis in terms of the sensitivity of the photorefractive silenite crystal for different recording wavelengths is carried out. It should be highlighted that the multiplexed power spectrum shows neither the multiplexing operation nor the amount of stored information increasing the system security. We present experimental results that support our approach

  6. Experimental color encryption in a joint transform correlator architecture

    Energy Technology Data Exchange (ETDEWEB)

    Tebaldi, Myrian; Amaya, Dafne; Torroba, Roberto [Centro de Investigaciones Opticas (CONICET La Plata-CIC) and UID OPTIMO, Facultad Ingenieria, Universidad Nacional de La Plata (Argentina); Horrillo, Sergi; Perez-Cabre, Elisabet; Millan, Maria S [Departamento de Optica y Optometria de la Universidad Politecnica de Cataluna, Terrasa (Spain); Bolognini, Nestor, E-mail: myrianc@ciop.unlp.edu.ar

    2011-01-01

    We present an experimental color image encryption by using a photorefractive crystal and a joint transform correlator (JTC) architecture. We achieve the color storing by changing the illumination wavelength. One JTC aperture has the input image information corresponding to a determined color channel bonded to a random phase mask (object aperture), and the other JTC aperture contains the key code mask. The joint power spectrum is stored in a photorefractive crystal. Each color data is stored as a modulation of birefringence in this photosensitive medium. The adequate wavelength change produces a corresponding power spectrum modification that avoids image encryption cross talk in the read out step. An analysis in terms of the sensitivity of the photorefractive silenite crystal for different recording wavelengths is carried out. It should be highlighted that the multiplexed power spectrum shows neither the multiplexing operation nor the amount of stored information increasing the system security. We present experimental results that support our approach

  7. Concurrent Model Transformations with Linda

    OpenAIRE

    Burgueño, Loli; Troya, Javier; Vallecillo, Antonio

    2013-01-01

    Nowadays, model transformations languages and engines use a sequential execution model. This is, only one execution thread deals with the whole transformation. However, model transformations dealing with very large models, such as those used in biology or aerospace applications, require concurrent solutions in order to speed up their performance. In this ongoing work we explore the use of Linda for implementing a set of basic mechanisms to enable concurrent model transformations, and prese...

  8. A cognitive model for software architecture complexity

    OpenAIRE

    Bouwers, E.; Lilienthal, C.; Visser, J.; Van Deursen, A.

    2010-01-01

    Evaluating the complexity of the architecture of a softwaresystem is a difficult task. Many aspects have to be considered to come to a balanced assessment. Several architecture evaluation methods have been proposed, but very few define a quality model to be used during the evaluation process. In addition, those methods that do introduce a quality model do not neccesarilly explain why elements of the model influence the complexity of an architecture. In this paper we propose a Software Archite...

  9. Software Architecture modeling framework using UML

    Directory of Open Access Journals (Sweden)

    R. Aroul canessane

    2013-04-01

    Full Text Available The software architecture’s are built using some specific languages while developing a project. Architecture design languages are used in research and industrial projects that are used represented using Unified Modeling Languages. However UML is not a completely qualified Architecture design language. But it has the ability to use as a substitute for all other languages that has been used earlier. UML can be used for creating Architectural viewpoint, this paper shows how UML can be extended for creating Software Architectures with architectural abstractions. The example that is used here for extended framework of UML is the CTScan device.

  10. Modeling and analyzing architectural change with Alloy

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Ingstrup, Mads

    2010-01-01

    to the uptake of reconfiguration techniques in industry. Using the Alloy language and associated tool, we propose a practical way to formally model and analyze runtime architectural change expressed as architectural scripts. Our evaluation shows the performance to be acceptable; our experience that...... the modelling language is convenient and expressive, and that our model accurately repesents the implementation it is used to reason about....

  11. Six Sigma Driven Enterprise Model Transformation

    Directory of Open Access Journals (Sweden)

    Raymond Vella

    2009-10-01

    Full Text Available Enterprise architecture methods provide a structured system to understand enterprise activities. However, existing enterprise modelling methodologies take static views of the enterprise and do not naturally lead to a path of improvement during enterprise model transformation. This paper discusses the need for a methodology to facilitate changes for improvement in an enterprise. The six sigma methodology is proposed as the tool to facilitate progressive and continual Enterprise Model Transformation to allow businesses to adapt to meet increased customer expectation and global competition. An alignment of six sigma with phases of GERAM life cycle is described with inclusion of Critical-To-Satisfaction (CTS requirements. The synergies of combining the two methodologies are presented in an effort to provide a more culturally embedded framework for Enterprise Model Transformation that builds on the success of six sigma.

  12. Model Construct Based Enterprise Model Architecture and Its Modeling Approach

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In order to support enterprise integration, a kind of model construct based enterprise model architecture and its modeling approach are studied in this paper. First, the structural makeup and internal relationships of enterprise model architecture are discussed. Then, the concept of reusable model construct (MC) which belongs to the control view and can help to derive other views is proposed. The modeling approach based on model construct consists of three steps, reference model architecture synthesis, enterprise model customization, system design and implementation. According to MC based modeling approach a case study with the background of one-kind-product machinery manufacturing enterprises is illustrated. It is shown that proposal model construct based enterprise model architecture and modeling approach are practical and efficient.

  13. Building Paradigms: Major Transformations in School Architecture (1798-2009)

    Science.gov (United States)

    Gislason, Neil

    2009-01-01

    This article provides an historical overview of significant trends in school architecture from 1798 to the present. I divide the history of school architecture into two major phases. The first period falls between 1798 and 1921: the modern graded classroom emerged as a standard architectural feature during this period. The second period, which…

  14. A novel algorithm and architecture of combined direct 2-D transform and quantization for H.264

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This paper proposes a novel high-performance direct 2-D transform algorithm which suitably arranges the data processing sequences adopted in row and column transforms of H.264 CODEC systems to finish the data transposition. Simultaneity, this paper proposes a new direct 2-D transform and quantization architectures for H.264 video coding standard. The induced new transform and quantization architecture greatly increases the data processing rate and eliminates transform multiplication and transpose memory, and select different mode and quantization according to AC coefficient, DC coefficient, chrominance block and Luminance block. And this architecture just need to storage one quantization tables for Integer transform and Hadamard transform, but it can do two types of forward transforms and quantization just in one block.

  15. Monterey Phoenix: modeling software and systems architecture

    OpenAIRE

    Auguston, Mikhail

    2009-01-01

    One of the major concerns in System and Software Architecture design is the question of the behavior of the system. For system's architeture one of the challenges is to predict emerging behavior of systems or systems. We suggest an approach for building system behavior models based on the concepts of event and event traces and tools for architecture verification.

  16. Spherical harmonic transform on heterogeneous architectures using hybrid programming

    CERN Document Server

    Szydlarski, Mikolaj; Falcou, Joel; Grigori, Laura; Stompor, Radek

    2011-01-01

    Spherical Harmonic Transforms (SHT) are at the heart of many scientific and practical ap- plications ranging from climate modeling to cosmological observations. In many of these areas a new wave of exciting, cutting-edge science goals have been recently proposed calling for simulations and analyses of actual experimental or observational data at very high resolutions, accompanied by producing or processing unprecedented volumes of the data. Both these aspects pose formidable challenge for the currently existing implementations of the transforms. This paper describes a multi CPU-GPUs implementation of an inverse SHT, based on hybrid program- ming combining MPI and CUDA, and discusses its tests as motivated by these forthcoming applications. We present performance comparisons of the multi GPU version and a hybrid, MPI/OpenMP version of the same transform. We find that one NVIDIA Tesla S1070 can accelerate overall execution time of the SHT by as much as 3 times with respect to the MPI/OpenMP version executed on ...

  17. Architectural view model for an integration platform

    Directory of Open Access Journals (Sweden)

    Tomasz Górski

    2012-03-01

    Full Text Available The most common architectural view model is "4+1" by Philipe Kruchten. This model presents the views required for a full description of computer system architecture. By contrast, this model seems to be insufficient to describe architecture of integration platform. Definitely lacks the view of integrated business processes. In the serviceoriented approach, one of the basic elements is a contract. It should also be included in the description of the architecture. Moreover, very important are integration mechanisms and mediation flows that should be presented in the description of architecture. Hence the need for integrated services view, and manner of their integration on the enterprise service bus. Use case view should also be extended by stereotypes required for presenting functionality exposed for other computer systems. It is therefore proposed architectural view model “1+5” for an integration platform. This model has following architectural views: Integrated processes, Use Cases, Logical, Integrated Services, Contracts, Deployment. Furthermore, in article was presented new UML profile "UML Profile for Integration Flows". In the profile were placed stereotypes corresponding to integration patterns and mediation mechanisms. It is important, that UML activity diagram was extended and its special form was obtained to model mediation flows on integration platform. Thus was proposed a new UML diagram: mediation flows diagram.

  18. Model driven support for the service oriented architecture modeling language

    OpenAIRE

    Ali, Nour; Nellipaiappan, Rukmani; Chandran, Rajalaxmi; Ali Babar, Muhammad

    2010-01-01

    peer-reviewed Service Oriented Architecture (SOA) is an architectural style that is widely used in distributed and dynamic systems. The Service oriented architecture Modeling Language (SoaML) is an OMG standard for modelling SOA independent of a technology. This paper presents a tool for modelling SOA using SoaML and generating OSGi Declarative Services Models from SoaML models. SoaML metamodel has been implemented as an Ecore model using the Eclipse Modeling Framework (EMF). An Eclipse pl...

  19. Localisation and World Modelling: an Architectural Perspective

    Directory of Open Access Journals (Sweden)

    Domenico G. Sorrenti

    2008-11-01

    Full Text Available Autonomous robot world modelling is a "chicken-and-egg" problem: position estimation needs a model of the world, whereas world modelling needs the robot position. Most of the works dealing with this issue propose holistic solutions under an algorithmic perspective by neglecting software architecture issues. This results in huge and monolithic pieces of software where implementation details reify strategic decisions. An architectural approach founded on separation of concerns may help to break the loop. Localisation and modelling, acting on different time scales, are mostly independent of each other. Sometimes synchronisation is required. Whenever needed, an external strategy tunes the relative rates of the two activities. The paper introduces rationale, design, and implementation of such a system which relies on Real-Time Performers, a software architecture providing suitable architectural abstractions to observe and control the system's temporal behaviour.

  20. From i* models to service oriented architecture models

    OpenAIRE

    Becerra, Carlos; Franch Gutiérrez, Javier; Astudillo, Hernán

    2010-01-01

    Requirements engineering and architectural design are key activities for successful development of software systems. Specifically in the service-oriented development systems there is a gap between the requirements description and architecture design and assessment. This article presents a systematic process for systematically deriving service-oriented architecture from goal-oriented models. This process allows generate candidate architectures based on i* models and helps architects t...

  1. Evaluating software architecture using fuzzy formal models

    OpenAIRE

    Payman Behbahaninejad; Ali Harounabadi; Sayed Javad Mirabedini

    2012-01-01

    Unified Modeling Language (UML) has been recognized as one of the most popular techniques to describe static and dynamic aspects of software systems. One of the primary issues in designing software packages is the existence of uncertainty associated with such models. Fuzzy-UML to describe software architecture has both static and dynamic perspective, simultaneously. The evaluation of software architecture design phase initiates always help us find some additional requirements, which helps red...

  2. Relating business modelling and enterprise architecture

    OpenAIRE

    Meertens, Lucas Onno

    2013-01-01

    This thesis proposes a methodology for creating business models, evaluating them, and relating them to enterprise architecture. The methodology consists of several steps, leading from an organization’s current situation to a target situation, via business models and enterprise architecture. Currently, increasing amounts of businesses rely on IT systems to do their business. However, success rates of IT implementations projects are low. Difficulties exist in aligning existing IT systems with b...

  3. INFORMATION MODEL OF SOCIAL TRANSFORMATIONS

    Directory of Open Access Journals (Sweden)

    Мария Васильевна Комова

    2013-09-01

    Full Text Available The social transformation is considered as a process of qualitative changes of the society, creating a new level of organization in all areas of life, in different social formations, societies of different types of development. The purpose of the study is to create a universal model for studying social transformations based on their understanding as the consequence of the information exchange processes in the society. After defining the conceptual model of the study, the author uses the following methods: the descriptive method, analysis, synthesis, comparison.Information, objectively existing in all elements and systems of the material world, is an integral attribute of the society transformation as well. The information model of social transformations is based on the definition of the society transformation as the change in the information that functions in the society’s information space. The study of social transformations is the study of information flows circulating in the society and being characterized by different spatial, temporal, and structural states. Social transformations are a highly integrated system of social processes and phenomena, the nature, course and consequences of which are affected by the factors representing the whole complex of material objects. The integrated information model of social transformations foresees the interaction of the following components: social memory, information space, and the social ideal. To determine the dynamics and intensity of social transformations the author uses the notions of "information threshold of social transformations" and "information pressure".Thus, the universal nature of information leads to considering social transformations as a system of information exchange processes. Social transformations can be extended to any episteme actualized by social needs. The establishment of an information threshold allows to simulate the course of social development, to predict the

  4. Checking Model Transformation Refinement

    OpenAIRE

    Büttner, Fabian; Egea, Marina; Guerra, Esther; Lara, Juan De

    2013-01-01

    The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-38883-5_15 Proceedings of 6th International Conference, ICMT 2013, Budapest, Hungary, June 18-19, 2013 Refinement is a central notion in computer science, meaning that some artefact S can be safely replaced by a refinement R, which preserves S’s properties. Having available techniques and tools to check transformation refinement would enable (a) the reasoning on whether a transformation correctly impl...

  5. Comparing relational model transformation technologies: implementing Query/View/Transformation with Triple Graph Grammars

    DEFF Research Database (Denmark)

    Greenyer, Joel; Kindler, Ekkart

    2010-01-01

    The Model Driven Architecture (MDA) is an approach to develop software based on different models. There are separate models for the business logic and for platform specific details. Moreover, code can be generated automatically from these models. This makes transformations a core technology for MDA...... to TGG-rules, which can then be executed by a TGG transformation engine that performs the actual QVT-transformation. Furthermore, we discuss an approach for mapping QVT-Relations to TGGs. Based on the semantics of TGGs, we clarify semantic gaps that we identified in the declarative languages of QVT...... and for model-based software engineering approaches in general. QVT (Query/View/Transformation) is the transformation technology recently proposed for this purpose by the OMG. TGGs (Triple Graph Grammars) are another transformation technology proposed in the mid-nineties, used for example in the...

  6. The Ragnarok Architectural Software Configuration Management Model

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    1999-01-01

    The architecture is the fundamental framework for designing and implementing large scale software, and the ability to trace and control its evolution is essential. However, many traditional software configuration management tools view 'software' merely as a set of files, not as an architecture....... This introduces an unfortunate impedance mismatch between the design domain (architecture level) and configuration management domain (file level.) This paper presents a software configuration management model that allows tight version control and configuration management of the architecture of a...... software system. Essential features of the model have been implemented in a research prototype, Ragnarok. Two years of experience using Ragnarok in three, real, small- to medium sized, projects is reported. The conclusion is that the presented model is viable, feels 'natural' for developers, and provides...

  7. Using ATL to define advanced and flexible constraint model transformations

    CERN Document Server

    Chenouard, Raphael; Soto, Ricardo

    2010-01-01

    Transforming constraint models is an important task in re- cent constraint programming systems. User-understandable models are defined during the modeling phase but rewriting or tuning them is manda- tory to get solving-efficient models. We propose a new architecture al- lowing to define bridges between any (modeling or solver) languages and to implement model optimizations. This architecture follows a model- driven approach where the constraint modeling process is seen as a set of model transformations. Among others, an interesting feature is the def- inition of transformations as concept-oriented rules, i.e. based on types of model elements where the types are organized into a hierarchy called a metamodel.

  8. Software Architecture Viewpoint Models: A Short Survey

    Directory of Open Access Journals (Sweden)

    Seyyed Ali Razavi Ebrahimi

    2013-11-01

    Full Text Available A software architecture is a complex entity that cannot be described in a simple one-dimensional fashion. The architecture views used to describe software provide the architect with a means of explaining the architecture to stakeholders. Each view presents different aspects of the system that fulfill functional and non-functional requirements. A view of a system is a representation of the system from the perspective of a viewpoint. Architecture viewpoints in software products provide guidelines to describe uniformly the total system and its subsystems. It defines the stakeholders whose concerns are reflected in the viewpoint and the guidelines, principles, and template models for constructing its views. The results of this study may serve as a roadmap to the software developers and architects in helping them select the appropriate viewpoint model based on the stakeholders and concerns that need to be covered by views.

  9. Software architecture built from behavior models

    OpenAIRE

    Auguston, Mikhail

    2009-01-01

    This paper suggests an approach to formal software system architecture specification based on behavior models. The behavior of the system is defined as a set of events (event trace) with two basic relations: precedence and inclusion. The structure of event trace is specified using event grammars and other constraints organized into schemas. The schema framework is amenable to stepwise architecture refinement, reuse, composition, visualization, and application of automated tools for consistenc...

  10. Investigation of Transformer Winding Architectures for High Voltage Capacitor Charging Applications

    DEFF Research Database (Denmark)

    Schneider, Henrik; Thummala, Prasanth; Huang, Lina; Ouyang, Ziwei; Knott, Arnold; Zhang, Zhe; Andersen, Michael A. E.

    Transformer parameters such as leakage inductance and self-capacitance are rarely calculated in advance during the design phase, because of the complexity and huge analytical error margins caused by practical winding implementation issues. Thus, choosing one transformer architecture over another...... for a given design is usually based on experience or a trial and error approach. This work presents equations regarding calculation of leakage inductance, self-capacitance and AC resistance in transformer winding architectures, ranging from the common non-interleaved primary/secondary winding...

  11. Unified transform architecture for AVC, AVS, VC-1 and HEVC high-performance codecs

    Science.gov (United States)

    Dias, Tiago; Roma, Nuno; Sousa, Leonel

    2014-12-01

    A unified architecture for fast and efficient computation of the set of two-dimensional (2-D) transforms adopted by the most recent state-of-the-art digital video standards is presented in this paper. Contrasting to other designs with similar functionality, the presented architecture is supported on a scalable, modular and completely configurable processing structure. This flexible structure not only allows to easily reconfigure the architecture to support different transform kernels, but it also permits its resizing to efficiently support transforms of different orders (e.g. order-4, order-8, order-16 and order-32). Consequently, not only is it highly suitable to realize high-performance multi-standard transform cores, but it also offers highly efficient implementations of specialized processing structures addressing only a reduced subset of transforms that are used by a specific video standard. The experimental results that were obtained by prototyping several configurations of this processing structure in a Xilinx Virtex-7 FPGA show the superior performance and hardware efficiency levels provided by the proposed unified architecture for the implementation of transform cores for the Advanced Video Coding (AVC), Audio Video coding Standard (AVS), VC-1 and High Efficiency Video Coding (HEVC) standards. In addition, such results also demonstrate the ability of this processing structure to realize multi-standard transform cores supporting all the standards mentioned above and that are capable of processing the 8k Ultra High Definition Television (UHDTV) video format (7,680 × 4,320 at 30 fps) in real time.

  12. The main commercial street in Ibagué (Colombia), 1893-1950. A study of its architectural and conceptual transformations that come from an industrial model dating back from the colonial period until the creation of the Republic and the first wave of Art Deco.

    OpenAIRE

    Andrés Francel

    2015-01-01

    This article presents the results from research into architecture on the main commercial street in Ibagué (Colombia) between 1893 and 1950. Marking the boundaries of both space and time correspond to the identification of urban transformations during the time of the colonisation, the creation of the Republic, and Art Deco in the most important commercial area of the city. They are in direct relation to the agro-industrial economic model. The article concludes by synthesising the economic and ...

  13. Measuring Business Model Transformation

    OpenAIRE

    Di Valentin, Christina; Weiblen, Tobias; Pussep, Anton; Schief, Markus; Emrich, Andreas; Werth, Dirk; Loos, Peter

    2012-01-01

    Pressure amongst competitors combined with a rapidly changing economy drive enterprises to continuously adapt their current business models to prevail over competitors. Business models nowadays must be flexible enough to cope with external or internal changes and therefore should be managed and controlled dynamically. Hence, enterprises must be aware of the interconnections between the strategic level and the operational level of business processes for being able to adjust their current busin...

  14. Limites, passages et transformations en jeu dans l’architecture / Limits, passages and transformations involved in Architecture.

    Directory of Open Access Journals (Sweden)

    Younès, Chris

    2006-11-01

    Full Text Available La manière de tracer des limites et d’opérer des passages par transferts, incursions, interférences notamment, rend compte du mode d’expression propre à l’architecture et de sa façon d’agencer le stable et l’instable, le délimité et l’illimité, la mesure et l’incommensurable, la continuité et la discontinuité. L’art de les mettre en œuvre par le projet architectural, urbain et paysager est une des problématiques de recherche du laboratoire interdisciplinaire Gerjau (philosophie architecture urbain qui a conduit différentes études sur ce sujet et en particulier du point de vue des rapports entre nature et culture./The way in which limits are drawn and passageways are operated for transfers, incursions, and specially interferences, show how architecture has it’s own way of expression that deals with the stable and the unstable, the limited and the unlimited, etc.

  15. The Software Architecture of Global Climate Models

    Science.gov (United States)

    Alexander, K. A.; Easterbrook, S. M.

    2011-12-01

    It has become common to compare and contrast the output of multiple global climate models (GCMs), such as in the Climate Model Intercomparison Project Phase 5 (CMIP5). However, intercomparisons of the software architecture of GCMs are almost nonexistent. In this qualitative study of seven GCMs from Canada, the United States, and Europe, we attempt to fill this gap in research. We describe the various representations of the climate system as computer programs, and account for architectural differences between models. Most GCMs now practice component-based software engineering, where Earth system components (such as the atmosphere or land surface) are present as highly encapsulated sub-models. This architecture facilitates a mix-and-match approach to climate modelling that allows for convenient sharing of model components between institutions, but it also leads to difficulty when choosing where to draw the lines between systems that are not encapsulated in the real world, such as sea ice. We also examine different styles of couplers in GCMs, which manage interaction and data flow between components. Finally, we pay particular attention to the varying levels of complexity in GCMs, both between and within models. Many GCMs have some components that are significantly more complex than others, a phenomenon which can be explained by the respective institution's research goals as well as the origin of the model components. In conclusion, although some features of software architecture have been adopted by every GCM we examined, other features show a wide range of different design choices and strategies. These architectural differences may provide new insights into variability and spread between models.

  16. Heteroscedastic transformation cure regression models.

    Science.gov (United States)

    Chen, Chyong-Mei; Chen, Chen-Hsin

    2016-06-30

    Cure models have been applied to analyze clinical trials with cures and age-at-onset studies with nonsusceptibility. Lu and Ying (On semiparametric transformation cure model. Biometrika 2004; 91:331?-343. DOI: 10.1093/biomet/91.2.331) developed a general class of semiparametric transformation cure models, which assumes that the failure times of uncured subjects, after an unknown monotone transformation, follow a regression model with homoscedastic residuals. However, it cannot deal with frequently encountered heteroscedasticity, which may result from dispersed ranges of failure time span among uncured subjects' strata. To tackle the phenomenon, this article presents semiparametric heteroscedastic transformation cure models. The cure status and the failure time of an uncured subject are fitted by a logistic regression model and a heteroscedastic transformation model, respectively. Unlike the approach of Lu and Ying, we derive score equations from the full likelihood for estimating the regression parameters in the proposed model. The similar martingale difference function to their proposal is used to estimate the infinite-dimensional transformation function. Our proposed estimating approach is intuitively applicable and can be conveniently extended to other complicated models when the maximization of the likelihood may be too tedious to be implemented. We conduct simulation studies to validate large-sample properties of the proposed estimators and to compare with the approach of Lu and Ying via the relative efficiency. The estimating method and the two relevant goodness-of-fit graphical procedures are illustrated by using breast cancer data and melanoma data. Copyright © 2016 John Wiley & Sons, Ltd. PMID:26887342

  17. Hierarchy modeling of subsurface palaeochannel reservoir architecture

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The studies on fluvial reservoir architecture are mainly aimed at outcrop and modern deposition,but rarely at the subsurface reservoir,so there are few effective methods to predict the distribution of subsurface reservoir architectures. In this paper,taking the meandering river reservoir of Guantao formation Gudao Oilfield,Jiyang depression,Baohai Gulf Basin,East China as an example,the archi-tectural modeling method of complex meandering belt reservoir is proposed,that is hierarchy con-straint,pattern fitting and multi-dimensional interaction. Architectures of meandering river reservoir can be divided into three hierarchies: meandering channel sandbody,point bar and lateral accretion body. Different hierarchies of the quantitative architecture pattern are fitted to subsurface well data (including dynamic monitoring data) in different hierarchies through one-dimensional hole,2D profiles and plane and 3D space,which are verified by each other. And then 3D model in different hierarchies is established. At the same time,the quantificational relationship between width of active river and the scale of point bar is set up,and the scale of lateral accretion sand body and shale beddings is con-firmed with horizontal well data. The study not only has significant meaning on the development of geology,but also can improve the oilfield exploitation greatly.

  18. A Novel VLSI Architecture for Real-Time Line-Based Wavelet Transform Using Lifting Scheme

    Institute of Scientific and Technical Information of China (English)

    Kai Liu; Ke-Yan Wang; Yun-Song Li; Cheng-Ke Wu

    2007-01-01

    In this paper, we propose a VLSI architecture that performs the line-based discrete wavelet transform (DWT) using a lifting scheme. The architecture consists of row processors, column processors, an intermediate buffer and a control module. Row processor and Column processor work as the horizontal and vertical filters respectively.Intermediate buffer is composed of five FIFOs to store temporary results of horizontal filter. Control module schedules the output order to external memory. Compared with existing ones, the presented architecture parallelizes all levels of wavelet transform to compute multilevel DWT within one image transmission time, and uses no external but one intermediate buffer to store several line results of horizontal filtering, which decreases resource required significantly and reduces memory efficiently. This architecture is suitable for various real-time image/video applications.

  19. Using the Model Driven Architecture Approach To Manage the expenses

    Directory of Open Access Journals (Sweden)

    Lamlili El Mazoui Nadori yasser

    2014-08-01

    Full Text Available This paper is about The conception and the realization of applications and Dashboard for the management of the spending and expenses of urban districts in Morocco. As so, we have chosen to use the N-tiers applications and the MDA (Model Driving Architecture transformation. In this paper we are going to present a model-driven approach to the development of N-tiers web applications based on the UML class diagram. The transformation language is the MOF 2.0 QVT (Meta-Object Facility 2.0 Query-View-Transformation standard which defines the meta-model for the development of model transformation. The transformation rules defined in this paper can generate, from the class diagram, an XML file containing the layers of N-tiers web application respecting a MVC2 (Model-View-Controller, DI (Dependency Injection and DAO (Data Access Object patterns. This file can be used to generate the end-to-end necessary code of a web application

  20. K-loops: Loop Transformations for Reconfigurable Architectures

    NARCIS (Netherlands)

    Dragomir, O.S.

    2011-01-01

    The focus of this dissertation is on kernel loops (K-loops), which are loop nests that contain hardware mapped kernels in the loop body. In this thesis, we propose methods for improving the performance of such K-loops, by using standard loop transformations for exposing and exploiting the coarse gr

  1. Optimization and mathematical modeling in computer architecture

    CERN Document Server

    Sankaralingam, Karu; Nowatzki, Tony

    2013-01-01

    In this book we give an overview of modeling techniques used to describe computer systems to mathematical optimization tools. We give a brief introduction to various classes of mathematical optimization frameworks with special focus on mixed integer linear programming which provides a good balance between solver time and expressiveness. We present four detailed case studies -- instruction set customization, data center resource management, spatial architecture scheduling, and resource allocation in tiled architectures -- showing how MILP can be used and quantifying by how much it outperforms t

  2. Low complexity reconfigurable architecture for the 5/3 and 9/7 discrete wavelet transform

    Institute of Scientific and Technical Information of China (English)

    Xiong Chengyi; Tian Jinwen; Liu Jian

    2006-01-01

    Efficient reconfigurable VLSI architecture for 1-D 5/3 and 9/7 wavelet transforms adopted in JPEG2000 proposal, based on lifting scheme is proposed. The embedded decimation technique based on fold and time multiplexing, as well as embedded boundary data extension technique, is adopted to optimize the design of the architecture. These reduce significantly the required numbers of the multipliers, adders and registers, as well as the amount of accessing external memory, and lead to decrease efficiently the hardware cost and power consumption of the design. The architecture is designed to generate an output per clock cycle, and the detailed component and the approximation of the input signal are available alternately. Experimental simulation and comparison results are presented, which demonstrate that the proposed architecture has lower hardware complexity, thus it is adapted for embedded applications. The presented architecture is simple, regular and scalable, and well suited for VLSI implementation.

  3. Efficient architectures for two-dimensional discrete wavelet transform using lifting scheme.

    Science.gov (United States)

    Xiong, Chengyi; Tian, Jinwen; Liu, Jian

    2007-03-01

    Novel architectures for 1-D and 2-D discrete wavelet transform (DWT) by using lifting schemes are presented in this paper. An embedded decimation technique is exploited to optimize the architecture for 1-D DWT, which is designed to receive an input and generate an output with the low- and high-frequency components of original data being available alternately. Based on this 1-D DWT architecture, an efficient line-based architecture for 2-D DWT is further proposed by employing parallel and pipeline techniques, which is mainly composed of two horizontal filter modules and one vertical filter module, working in parallel and pipeline fashion with 100% hardware utilization. This 2-D architecture is called fast architecture (FA) that can perform J levels of decomposition for N * N image in approximately 2N2(1 - 4(-J))/3 internal clock cycles. Moreover, another efficient generic line-based 2-D architecture is proposed by exploiting the parallelism among four subband transforms in lifting-based 2-D DWT, which can perform J levels of decomposition for N * N image in approximately N2(1 - 4(-J))/3 internal clock cycles; hence, it is called high-speed architecture. The throughput rate of the latter is increased by two times when comparing with the former 2-D architecture, but only less additional hardware cost is added. Compared with the works reported in previous literature, the proposed architectures for 2-D DWT are efficient alternatives in tradeoff among hardware cost, throughput rate, output latency and control complexity, etc. PMID:17357722

  4. Modelling Approach In Islamic Architectural Designs

    Directory of Open Access Journals (Sweden)

    Suhaimi Salleh

    2014-06-01

    Full Text Available Architectural designs contribute as one of the main factors that should be considered in minimizing negative impacts in planning and structural development in buildings such as in mosques. In this paper, the ergonomics perspective is revisited which hence focuses on the conditional factors involving organisational, psychological, social and population as a whole. This paper tries to highlight the functional and architectural integration with ecstatic elements in the form of decorative and ornamental outlay as well as incorporating the building structure such as wall, domes and gates. This paper further focuses the mathematical aspects of the architectural designs such as polar equations and the golden ratio. These designs are modelled into mathematical equations of various forms, while the golden ratio in mosque is verified using two techniques namely, the geometric construction and the numerical method. The exemplary designs are taken from theSabah Bandaraya Mosque in Likas, Kota Kinabalu and the Sarawak State Mosque in Kuching,while the Universiti Malaysia Sabah Mosque is used for the Golden Ratio. Results show thatIslamic architectural buildings and designs have long had mathematical concepts and techniques underlying its foundation, hence, a modelling approach is needed to rejuvenate these Islamic designs.

  5. Plastic Super Models: aesthetics, architecture and the model of emergence

    Directory of Open Access Journals (Sweden)

    Pia Ednie-Brown

    2008-01-01

    Full Text Available Modelling is at the core of what architects do, rendering the discipline especially fragile and sensitive to shifts in the nature of models and modelling. A digitally-based, explorative architectural milieu has been actively modelling in tune with a socio-cultural paradigm related to the concept of emergence, presenting numerous challenges to a range of assumptions about the activity of architectural design. This paper explores how this milieu has acted to unsettle the cool containments of architectural composure by bringing affective activity emphatically to the foreground.

  6. An Evaluation of ADLs on Modeling Patterns for Software Architecture

    NARCIS (Netherlands)

    Waqas Kamal, Ahmad; Avgeriou, Paris

    2007-01-01

    Architecture patterns provide solutions to recurring design problems at the architecture level. In order to model patterns during software architecture design, one may use a number of existing Architecture Description Languages (ADLs), including the UML, a generic language but also a de facto indust

  7. Model-driven architecture for cancer research

    OpenAIRE

    Calinescu, R.; Harris, S.; Gibbons, J.; Toujilov, I.; Nagl, S

    2007-01-01

    Abstract It is a common phenomenon for research projects to collect and analyse valuable data using ad-hoc information systems. These costly-to-build systems are often composed of incompatible variants of the same modules, and record data in ways that prevent any meaningful result analysis across similar projects. We present a framework that uses a combination of formal methods, model-driven development and service-oriented architecture (SOA) technologies to automate the generation of data ma...

  8. Integrable Bogoliubov Transform and Integrable Model

    Institute of Scientific and Technical Information of China (English)

    王宁

    2003-01-01

    By defining Bogoliubov transform as a function of parameters, the integrability of the Bogoliubov transform in parameter space is investigated. It is shown that integrable Bogoliubov transform is closely related to the known integrable model. The relation between the integrable Bogoliubov transform and geometric phase of vacuum induced by the Bogoliubov transform is also discussed.

  9. Curating Architectural 3D CAD Models

    Directory of Open Access Journals (Sweden)

    MacKenzie Smith

    2009-06-01

    Full Text Available Normal 0 Increasing demand to manage and preserve 3-dimensional models for a variety of physical phenomena (e.g., building and engineering designs, computer games, or scientific visualizations is creating new challenges for digital archives. Preserving 3D models requires identifying technical formats for the models that can be maintained over time, and the available formats offer different advantages and disadvantages depending on the intended future uses of the models. Additionally, the metadata required to manage 3D models is not yet standardized, and getting intellectual proposal rights for digital models is uncharted territory.  The FACADE Project at MIT is investigating these challenges in the architecture, engineering and construction (AEC industry and has developed recommendations and systems to support digital archives in dealing with digital 3D models and related data. These results can also be generalized to other domains doing 3D modeling.

  10. Using Enterprise Architecture Models for System Quality Analysis

    OpenAIRE

    Närman, Per; Schönherr, Marten; Johnson, Pontus; Ekstedt, Mathias; Chenine, Moustafa

    2008-01-01

    Enterprise Architecture is a model-based approach to business-oriented IT management. To promote good IT decision making, an Enterprise Architecture framework needs to explicate what kind of analyses it supports. Since creating Enterprise Architecture models is expensive and without intrinsic value, it is desirable to only create Enterprise Architecture models based on metamodels that support well-defined analyses. This paper presents the content and extension of a metamodel which supports cr...

  11. A Federated Approach to Enterprise Architecture Model Maintenance

    OpenAIRE

    Fischer, Ronny; Aier, Stephan; Winter, Robert

    2007-01-01

    Enterprise architecture is gaining acceptance as an approach to manage change and foster IT/business alignment by (1) propagating strategy and process changes to the software and infrastructure level, by (2) supporting consistent business transformation enabled by technology innovations, and by (3) decoupling business-oriented and technology-oriented architectures. Due to constant change in business as well as in technology, enterprise architecture management is a permanent process rather tha...

  12. Anisotropic analysis of trabecular architecture in human femur bone radiographs using quaternion wavelet transforms.

    Science.gov (United States)

    Sangeetha, S; Sujatha, C M; Manamalli, D

    2014-01-01

    In this work, anisotropy of compressive and tensile strength regions of femur trabecular bone are analysed using quaternion wavelet transforms. The normal and abnormal femur trabecular bone radiographic images are considered for this study. The sub-anatomic regions, which include compressive and tensile regions, are delineated using pre-processing procedures. These delineated regions are subjected to quaternion wavelet transforms and statistical parameters are derived from the transformed images. These parameters are correlated with apparent porosity, which is derived from the strength regions. Further, anisotropy is also calculated from the transformed images and is analyzed. Results show that the anisotropy values derived from second and third phase components of quaternion wavelet transform are found to be distinct for normal and abnormal samples with high statistical significance for both compressive and tensile regions. These investigations demonstrate that architectural anisotropy derived from QWT analysis is able to differentiate normal and abnormal samples. PMID:25571265

  13. Modelling and using product architectures in mechatronic product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    , experiences by using the architecture representation in a mechatronic development project, and the scope of using the architecture model as a skeleton for a data structure in a PLM system. The fundamental idea for planning and modeling holistic architectures is that an improved understanding of the whole...

  14. Six layers Architecture Model for Object Oriented Database

    OpenAIRE

    Mansaf Alam

    2011-01-01

    In this paper, a six layered architecture for object oriented database from access and management point of view is proposed. This architecture model consist of six layers: Interaction layer, Application layer, Administration layer, Security layer, Paging layer, and Virtual layer.

  15. 04101 Discussion -- A Taxonomy of Model Transformations

    OpenAIRE

    Mens, Tom; CZARNECKI, Krzysztof; Van Gorp, Pieter

    2005-01-01

    This report summarises the results of the discussions of a working group on model transformation of the Dagstuhl Seminar on Language Engineering for Model-Driven Software Development. The main contribution is a taxonomy of model transformation. This taxonomy can be used to help developers in deciding which model transformation approach is best suited to deal with a particular problem.

  16. Model Validation in Ontology Based Transformations

    Directory of Open Access Journals (Sweden)

    Jesús M. Almendros-Jiménez

    2012-10-01

    Full Text Available Model Driven Engineering (MDE is an emerging approach of software engineering. MDE emphasizes the construction of models from which the implementation should be derived by applying model transformations. The Ontology Definition Meta-model (ODM has been proposed as a profile for UML models of the Web Ontology Language (OWL. In this context, transformations of UML models can be mapped into ODM/OWL transformations. On the other hand, model validation is a crucial task in model transformation. Meta-modeling permits to give a syntactic structure to source and target models. However, semantic requirements have to be imposed on source and target models. A given transformation will be sound when source and target models fulfill the syntactic and semantic requirements. In this paper, we present an approach for model validation in ODM based transformations. Adopting a logic programming based transformational approach we will show how it is possible to transform and validate models. Properties to be validated range from structural and semantic requirements of models (pre and post conditions to properties of the transformation (invariants. The approach has been applied to a well-known example of model transformation: the Entity-Relationship (ER to Relational Model (RM transformation.

  17. Grid architecture model of network centric warfare

    Institute of Scientific and Technical Information of China (English)

    Yan Tihua; Wang Baoshu

    2006-01-01

    NCW(network centric warfare) is an information warfare concentrating on network. A global network-centric warfare architecture with OGSA grid technology is put forward, which is a four levels system including the user level, the application level, the grid middleware layer and the resource level. In grid middleware layer, based on virtual hosting environment, a BEPL4WS grid service composition method is introduced. In addition, the NCW grid service model is built with the help of Eclipse-SDK-3.0.1 and Bpws4j.

  18. The Fermilab Central Computing Facility architectural model

    International Nuclear Information System (INIS)

    The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS Cluster interactive front end, an Amdahl VM computing engine, ACP farms, and (primarily) VMS workstations. This presentation will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. 2 figs

  19. HL7 document patient record architecture: an XML document architecture based on a shared information model.

    OpenAIRE

    Dolin, R H; Alschuler, L.; Behlen, F.; Biron, P. V.; BOYER S.; Essin, D.; Harding, L.; Lincoln, T.; Mattison, J E; Rishel, W.; Sokolowski, R.; Spinosa, J.; Williams, J. P.

    1999-01-01

    The HL7 SGML/XML Special Interest Group is developing the HL7 Document Patient Record Architecture. This draft proposal strives to create a common data architecture for the interoperability of healthcare documents. Key components are that it is under the umbrella of HL7 standards, it is specified in Extensible Markup Language, the semantics are drawn from the HL7 Reference Information Model, and the document specifications form an architecture that, in aggregate, define the semantics and stru...

  20. The main commercial street in Ibagué (Colombia, 1893-1950. A study of its architectural and conceptual transformations that come from an industrial model dating back from the colonial period until the creation of the Republic and the first wave of Art Deco.

    Directory of Open Access Journals (Sweden)

    Andrés Francel

    2015-12-01

    Full Text Available This article presents the results from research into architecture on the main commercial street in Ibagué (Colombia between 1893 and 1950. Marking the boundaries of both space and time correspond to the identification of urban transformations during the time of the colonisation, the creation of the Republic, and Art Deco in the most important commercial area of the city. They are in direct relation to the agro-industrial economic model. The article concludes by synthesising the economic and political structure that transformed the society into a republic and how the commercial street led to the overlapping of advertising with the urban landscape, which resulted from the business identifying with development and beauty.

  1. Managing Green Business Model Transformations

    CERN Document Server

    Sommer, Axel

    2012-01-01

    Environmental sustainability creates both tremendous business opportunities and formidable threats to established companies across virtually all industry sectors. Yet many companies tackle the issue in a superficial or passive way through increased environmental reporting, the use of “greenspeak” in their corporate communication activities or isolated efforts to create green products or reduce pollution. In contrast, there are a small but increasing number of firms that employ a holistic approach to sustainability and consider fundamental changes to their existing business models. By ignoring the opportunities of Green Business Model Transformations, companies exclude themselves from a large variety of potential means to create economic value. In addition to ordinary product and process innovations, they can change “the rules of the game” within an industry towards environmental sustainability. This can facilitate the commercialisation of new green products that would not be competitive otherwise targ...

  2. Business model driven service architecture design for enterprise application integration

    OpenAIRE

    Gacitua-Decar, Veronica; Pahl, Claus

    2008-01-01

    Increasingly, organisations are using a Service-Oriented Architecture (SOA) as an approach to Enterprise Application Integration (EAI), which is required for the automation of business processes. This paper presents an architecture development process which guides the transition from business models to a service-based software architecture. The process is supported by business reference models and patterns. Firstly, the business process models are enhanced with domain model elements, applicat...

  3. Modelling and evaluating fluid software architectures for intelligent environments

    OpenAIRE

    Kortuem, Gerd

    2006-01-01

    In this paper we introduce a model for specifying fluid architectures of intelligent environments. A fluid architecture is one that is able to accommodate continuous structural changes without aversely affecting the system's behaviour. The model enables designers to specify structural modifications that may be performed by users as part of the normal interaction and which must be supported by the underlying environment infrastructure. The model is formulated as a generative architectural styl...

  4. Investigation of Transformer Winding Architectures for High Voltage (2.5 kV) Capacitor Charging and Discharging Applications

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Schneider, Henrik; Zhang, Zhe;

    2016-01-01

    Transformer parasitics such as leakage inductance and self-capacitance are rarely calculated in advance during the design phase, because of the complexity and huge analytical error margins caused by practical winding implementation issues. Thus, choosing one transformer architecture over another...... for a given design is usually based on experience, or a trial and error approach. This paper presents analytical expressions for calculating leakage inductance, self-capacitance and ac resistance in transformer winding architectures (TWAs), ranging from the common non-interleaved primary....../secondary winding architecture, to an interleaved, sectionalized, and bank winded architecture. The calculated results are evaluated experimentally, and through finite element (FEM) simulations, for a RM8 transformer with a turns ratio of 10. The four TWAs such as, noninterleaved and non-sectioned, non...

  5. A Modeling Approach based on UML/MARTE for GPU Architecture

    CERN Document Server

    Rodrigues, Antonio Wendell De Oliveira; Dekeyser, Jean-Luc

    2011-01-01

    Nowadays, the High Performance Computing is part of the context of embedded systems. Graphics Processing Units (GPUs) are more and more used in acceleration of the most part of algorithms and applications. Over the past years, not many efforts have been done to describe abstractions of applications in relation to their target architectures. Thus, when developers need to associate applications and GPUs, for example, they find difficulty and prefer using API for these architectures. This paper presents a metamodel extension for MARTE profile and a model for GPU architectures. The main goal is to specify the task and data allocation in the memory hierarchy of these architectures. The results show that this approach will help to generate code for GPUs based on model transformations using Model Driven Engineering (MDE).

  6. Proactive Modeling of Market, Product and Production Architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars; Andreasen, Mogens Myrup

    This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important...... benefits of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is...

  7. Modeling Environment for Component Model Checking from Hierarchical Architecture

    Czech Academy of Sciences Publication Activity Database

    Pařízek, P.; Plášil, František

    2007-01-01

    Roč. 182, - (2007), s. 139-153. ISSN 1571-0661 R&D Projects: GA ČR GA201/06/0770 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * behavior protocols * environment model checking * hierarchical component architecture Subject RIV: JC - Computer Hardware ; Software

  8. Efficient Algorithm and Architecture of Critical-Band Transform for Low-Power Speech Applications

    Directory of Open Access Journals (Sweden)

    Gan Woon-Seng

    2007-01-01

    Full Text Available An efficient algorithm and its corresponding VLSI architecture for the critical-band transform (CBT are developed to approximate the critical-band filtering of the human ear. The CBT consists of a constant-bandwidth transform in the lower frequency range and a Brown constant- transform (CQT in the higher frequency range. The corresponding VLSI architecture is proposed to achieve significant power efficiency by reducing the computational complexity, using pipeline and parallel processing, and applying the supply voltage scaling technique. A 21-band Bark scale CBT processor with a sampling rate of 16 kHz is designed and simulated. Simulation results verify its suitability for performing short-time spectral analysis on speech. It has a better fitting on the human ear critical-band analysis, significantly fewer computations, and therefore is more energy-efficient than other methods. With a 0.35 m CMOS technology, it calculates a 160-point speech in 4.99 milliseconds at 234 kHz. The power dissipation is 15.6 W at 1.1 V. It achieves 82.1 power reduction as compared to a benchmark 256-point FFT processor.

  9. 3D-models in landscape architecture

    NARCIS (Netherlands)

    Nijhuis, S.; Stellingwerff, M.C.

    2011-01-01

    Landscape architecture consists of a basic attitude that involves four principles of study and practice. These are: anamnesis (palimpsest), process, three-dimensional space and scale-continuum (relational context). The core of landscape architecture as a design discipline is the construction and art

  10. Architecture of the Product State Model Environment

    DEFF Research Database (Denmark)

    Holm Larsen, Michael; Lynggaard, Hans Jørgen B.

    2003-01-01

    thedevelopment activities of the PSM architecture. An example discusses how to handle product relatedinformation on the shop floor in a manufacturing company and focuses on how dynamically updatedproduct data can improve control of production activities. This prototype example of welding a jointbetween two steel...... plates serves as proof of concept for the PSM architecture....

  11. Proactive Modeling of Market, Product and Production Architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars;

    2011-01-01

    This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...

  12. HL7 document patient record architecture: an XML document architecture based on a shared information model.

    Science.gov (United States)

    Dolin, R H; Alschuler, L; Behlen, F; Biron, P V; Boyer, S; Essin, D; Harding, L; Lincoln, T; Mattison, J E; Rishel, W; Sokolowski, R; Spinosa, J; Williams, J P

    1999-01-01

    The HL7 SGML/XML Special Interest Group is developing the HL7 Document Patient Record Architecture. This draft proposal strives to create a common data architecture for the interoperability of healthcare documents. Key components are that it is under the umbrella of HL7 standards, it is specified in Extensible Markup Language, the semantics are drawn from the HL7 Reference Information Model, and the document specifications form an architecture that, in aggregate, define the semantics and structural constraints necessary for the exchange of clinical documents. The proposal is a work in progress and has not yet been submitted to HL7's formal balloting process. PMID:10566319

  13. Security Model For Service-Oriented Architecture

    OpenAIRE

    Oldooz Karimi

    2011-01-01

    In this article, we examine how security applies to Service Oriented Architecture (SOA). Before we discuss security for SOA, lets take a step back and examine what SOA is. SOA is an architectural approach which involves applications being exposed as "services". Originally, services in SOA were associated with a stack of technologies which included SOAP, WSDL, and UDDI. This article addresses the defects of traditional enterprise application integration by combining service oriented-architect...

  14. Modelling Approach In Islamic Architectural Designs

    OpenAIRE

    Suhaimi Salleh; Noraini Abdullah; Khadizah, G.

    2014-01-01

    Architectural designs contribute as one of the main factors that should be considered in minimizing negative impacts in planning and structural development in buildings such as in mosques. In this paper, the ergonomics perspective is revisited which hence focuses on the conditional factors involving organisational, psychological, social and population as a whole. This paper tries to highlight the functional and architectural integration with ecstatic elements in the form of decorative and orn...

  15. A Transformation Model of Engineering Education

    Science.gov (United States)

    Owens, Camelia L.; Fortenberry, Norman L.

    2007-01-01

    A transformation model of engineering education at the undergraduate level is constructed to define the human and technical resources that contribute to the production of a university-trained engineer. The theory of technical systems is applied in the development of the model to transform a graduating pre-university pupil into a university-trained…

  16. Model-Drive Architecture for Agent-Based Systems

    Science.gov (United States)

    Gradanin, Denis; Singh, H. Lally; Bohner, Shawn A.; Hinchey, Michael G.

    2004-01-01

    The Model Driven Architecture (MDA) approach uses a platform-independent model to define system functionality, or requirements, using some specification language. The requirements are then translated to a platform-specific model for implementation. An agent architecture based on the human cognitive model of planning, the Cognitive Agent Architecture (Cougaar) is selected for the implementation platform. The resulting Cougaar MDA prescribes certain kinds of models to be used, how those models may be prepared and the relationships of the different kinds of models. Using the existing Cougaar architecture, the level of application composition is elevated from individual components to domain level model specifications in order to generate software artifacts. The software artifacts generation is based on a metamodel. Each component maps to a UML structured component which is then converted into multiple artifacts: Cougaar/Java code, documentation, and test cases.

  17. Architecture design in global and model-centric software development

    NARCIS (Netherlands)

    Heijstek, Werner

    2012-01-01

    This doctoral dissertation describes a series of empirical investigations into representation, dissemination and coordination of software architecture design in the context of global software development. A particular focus is placed on model-centric and model-driven software development.

  18. Research on system architecture of modeling and simulation

    Institute of Scientific and Technical Information of China (English)

    WANG Jiangyun; WANG Xingren

    2007-01-01

    The modeling and simulation(M&S)architecture describes and defines the relationship between the difeerent parts of a simulation.The simulation system architecture and simulation support platform architecture are discussed separately.The simulation support platform architecture consists of the management layer,the resource layer,the communication layer,the application layer and the infrastructure layer.The best Wav is to design and realize the M&S collaborative environment for simulation support platform in the resource-communication-application three-dimension space.

  19. Transparent Model Transformation: Turning Your Favourite Model Editor into a Transformation Tool

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    first transformation language implementing the principles of Transparent Model Transformation: syntax, environment, and execution transparency. VMTL works by weaving a transformation aspect into its host modeling language. We show how our implementation of VMTL turns any model editor into a flexible...

  20. Transparent Model Transformation: Turning Your Favourite Model Editor into a Transformation Tool

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2015-01-01

    , the first transformation language implementing the principles of Transparent Model Transformation: syntax, environment, and execution transparency. VMTL works by weaving a transformation aspect into its host modeling language. We show how our implementation of VMTL turns any model editor into a flexible...

  1. Modeling of austenite to ferrite transformation

    Indian Academy of Sciences (India)

    Mohsen Kazeminezhad

    2012-06-01

    In this research, an algorithm based on the -state Potts model is presented for modeling the austenite to ferrite transformation. In the algorithm, it is possible to exactly track boundary migration of the phase formed during transformation. In the algorithm, effects of changes in chemical free energy, strain free energy and interfacial energies of austenite–austenite, ferrite–ferrite and austenite–ferrite during transformation are considered. From the algorithm, the kinetics of transformation and mean ferrite grain size for different cooling rates are calculated. It is found that there is a good agreement between the calculated and experimental results.

  2. A Model of Transformative Collaboration

    Science.gov (United States)

    Swartz, Ann L.; Triscari, Jacqlyn S.

    2011-01-01

    Two collaborative writing partners sought to deepen their understanding of transformative learning by conducting several spirals of grounded theory research on their own collaborative relationship. Drawing from adult education, business, and social science literature and including descriptive analysis of their records of activity and interaction…

  3. Predictive maintenance and modeling of Transformer

    Directory of Open Access Journals (Sweden)

    Ladani Dhaval H., Sandeep A. Mehta, Pallav Gandhi

    2013-04-01

    Full Text Available Power transformer is the most important and expensive equipment in Power plant and the Oil has the main roles of insulating and cooling of transformer. The oil condition has to be checked regularly and replaced when it necessary, because to avoid the suddenly failure of the transformer. Large power transformers are the most key components in power system and their correct functioning or maintenance is important to system operation. Power transformers are protected by different protection schemes that use voltages and currents to detect abnormal condition in the different zone of protection. For this type of scheme, a short circuit or increment load accidental it must be to trip a system. Power transformers ageing are one of the most critical issues. Also their replacement will consider amount of time and cost. Therefore, developing a replacement or maintenance strategy of transformer populations is important. This paper presents simulation for life assessment of the transformer per hour, per day, per month using LabView™. Here Load and ambient temperatures are two important factors that affect the life of insulation of transformers. The estimated load factors and ambient temperatures are input and to find out the Hot spot temperature or ageing or rate of change of ageing of transformer to the IEC life consumption models to assess the consumed life of insulation of transformer.

  4. xpMODEL: A Novel Model for ASIP Architecture

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With greater flexibility and less cost, there is a trend that application specific instruction set processor (ASIP) will become the alternative implementation style to application of specific integrated circuit (ASIC). Architecture model is a key component in ASIP design flow. A novel ASIP model, xpMODEL, was presented. Its key features include: explicit specification of the memory subsystem allowing novel memory organizations and hierarchies; the introduction of meta-operator and instruction behavior extended finite state machine providing xpMODEL with ability to model execution sequencing, inherent parallelism, data/control/structural hazards, and out-oforder execution mode in ASIP. A comparison with other ASIP models shows the superiority of xpMODEL.

  5. Multicore technology architecture, reconfiguration, and modeling

    CERN Document Server

    Qadri, Muhammad Yasir

    2013-01-01

    The saturation of design complexity and clock frequencies for single-core processors has resulted in the emergence of multicore architectures as an alternative design paradigm. Nowadays, multicore/multithreaded computing systems are not only a de-facto standard for high-end applications, they are also gaining popularity in the field of embedded computing. The start of the multicore era has altered the concepts relating to almost all of the areas of computer architecture design, including core design, memory management, thread scheduling, application support, inter-processor communication, debu

  6. Enhancing parallelism of tile bidiagonal transformation on multicore architectures using tree reduction

    KAUST Repository

    Ltaief, Hatem

    2012-01-01

    The objective of this paper is to enhance the parallelism of the tile bidiagonal transformation using tree reduction on multicore architectures. First introduced by Ltaief et. al [LAPACK Working Note #247, 2011], the bidiagonal transformation using tile algorithms with a two-stage approach has shown very promising results on square matrices. However, for tall and skinny matrices, the inherent problem of processing the panel in a domino-like fashion generates unnecessary sequential tasks. By using tree reduction, the panel is horizontally split, which creates another dimension of parallelism and engenders many concurrent tasks to be dynamically scheduled on the available cores. The results reported in this paper are very encouraging. The new tile bidiagonal transformation, targeting tall and skinny matrices, outperforms the state-of-the-art numerical linear algebra libraries LAPACK V3.2 and Intel MKL ver. 10.3 by up to 29-fold speedup and the standard two-stage PLASMA BRD by up to 20-fold speedup, on an eight socket hexa-core AMD Opteron multicore shared-memory system. © 2012 Springer-Verlag.

  7. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

  8. Transformational and Transactional Factors for the Successful Implementation of Enterprise Architecture in Public Sector

    Directory of Open Access Journals (Sweden)

    Seogjun Lee

    2016-05-01

    Full Text Available Enterprise architecture (EA is one of the most important and effective tools for delivering high-quality e-government services to citizens. In this study, we used organizational performance and change theory to determine factors that contribute to the successful implementation of EA. We classified these factors as one of two types: transformation change (TFC and transactional change (TSC. To identify these factors, we collected survey data from Korean public sectors that have implemented EA for years. Results show that while EA management systems (EAMS and EA guidelines directly affect EA performance, laws and regulations, and EA organization exert an indirect effect. Further, top management support had both direct and indirect effect on EA performance. Ultimately, the findings produced by this study have implications for government institutions that plan to implement EA.

  9. Modeling support for mobile ambients in service oriented architecture

    OpenAIRE

    Ali, Nour; Chen, Fei; Solis, Carlos

    2012-01-01

    peer-reviewed Service Oriented Architecture (SOA) is a promising approach for designing and developing mobile applications. However, SOA concepts need to be combined with mobile principles to fully accommodate their requirements. Previously, a metamodel called Ambient-SoaML has been defined, which combines the Service Oriented Architecture Modeling Language (SoaML) and Mobile Ambients concepts inspired from Ambient Calculus. In this paper, a modeling tool that suppo...

  10. Evolution of Modelling Techniques for Service Oriented Architecture

    OpenAIRE

    Mikit Kanakia; P. M. Chawan

    2014-01-01

    Service-oriented architecture (SOA) is a software design and architecture design pattern based on independent pieces of software providing functionality as services to other applications. The benefit of SOA in the IT infrastructure is to allow parallel use and data exchange between programs which are services to the enterprise. Unified Modelling Language (UML) is a standardized general-purpose modelling language in the field of software engineering. The UML includes a set of graphic notation ...

  11. Bosonic superconformal Toda model and dressing transformation

    International Nuclear Information System (INIS)

    The authors show the dressing transformations of the basic field and the classical chiral operators in the Bosonic Superconformal Toda model. After quantization, The related quantum algebra is obtained

  12. On Estimation of Partially Linear Transformation Models

    OpenAIRE

    Lu, Wenbin; Zhang, Hao Helen

    2010-01-01

    We study a general class of partially linear transformation models, which extend linear transformation models by incorporating nonlinear covariate effects in survival data analysis. A new martingale-based estimating equation approach, consisting of both global and kernel-weighted local estimation equations, is developed for estimating the parametric and nonparametric covariate effects in a unified manner. We show that with a proper choice of the kernel bandwidth parameter, one can obtain the ...

  13. Investigation of Transformer Winding Architectures for High Voltage (2.5 kV) Capacitor Charging and Discharging Applications

    OpenAIRE

    Thummala, Prasanth; Schneider, Henrik; Zhang, Zhe; Andersen, Michael A. E.

    2016-01-01

    Transformer parasitics such as leakage inductance and self-capacitance are rarely calculated in advance during the design phase, because of the complexity and huge analytical error margins caused by practical winding implementation issues. Thus, choosing one transformer architecture over another for a given design is usually based on experience, or a trial and error approach. This paper presents analytical expressions for calculating leakage inductance, self-capacitance and ac resistance in ...

  14. Modeling and simulating of unloading welding transformer

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The simulation model of an unloading welding transformer was established on the basis of MATLAB software, and the modeling principle was described in detail in the paper. The model was made up of three sub-models, i.e. the linear inductor sub-model, the non-linear inductor sub-model and series connection sub-model controlled by current, and these sub-models were jointed together by means of segmented linearization. The simulating results showed that, in the conditions of the high convert frequency and the large cross section of the magnet core of a welding transformer, the non-linear inductor sub-model can be substituted by a linear inductor sub-model in the model; and the leakage reactance in the welding transformer is one of the main reasons of producing over-current and over-voltage in the inverter. The simulation results demonstrate that the over-voltage produced by leakage reactance is nearly two times of the input voltage supplied to the transformer, and the lasting time of over-voltage depends on time constant τ1. With reducing of τ1, the amplitude of the over-current will increase, and the lasting time becomes shorter. Contrarily, with increasing of τ1, the amplitude of the over-current will decrease, and the lasting time becomes longer. The model has played the important role for the development of the inverter resistance welding machine.

  15. Electronic Service Architecture Model Assessment of Conformity to Cloud Computing Key Features

    OpenAIRE

    Stipravietis, P; Žeiris, E; Ziema, M

    2013-01-01

    The research examines electronic service execution possibilities in cloud computing environment and the key features of cloud computing. It also offers a method which allows quantitatively assess the conformity of existing e-service architecture model to cloud computing key features.The method allows evaluating the amount of necessary transformations and their efficiency. The offered solution is verified using the business process administered by Motor Insurance Bureau...

  16. Development of a small single-ring OpenPET prototype with a novel transformable architecture

    Science.gov (United States)

    Tashima, Hideaki; Yoshida, Eiji; Inadama, Naoko; Nishikido, Fumihiko; Nakajima, Yasunori; Wakizaka, Hidekatsu; Shinaji, Tetsuya; Nitta, Munetaka; Kinouchi, Shoko; Suga, Mikio; Haneishi, Hideaki; Inaniwa, Taku; Yamaya, Taiga

    2016-02-01

    The single-ring OpenPET (SROP), for which the detector arrangement has a cylinder shape cut by two parallel planes at a slant angle to form an open space, is our original proposal for in-beam PET. In this study, we developed a small prototype of an axial-shift type SROP (AS-SROP) with a novel transformable architecture for a proof-of-concept. In the AS-SROP, detectors originally forming a cylindrical PET are axially shifted little by little. We designed the small AS-SROP prototype for 4-layer depth-of-interaction detectors arranged in a ring diameter of 250 mm. The prototype had two modes: open and closed. The open mode formed the SROP with the open space of 139 mm and the closed mode formed a conventional cylindrical PET. The detectors were simultaneously moved by a rotation handle allowing them to be transformed between the two modes. We evaluated the basic performance of the developed prototype and carried out in-beam imaging tests in the HIMAC using 11C radioactive beam irradiation. As a result, we found the open mode enabled in-beam PET imaging at a slight cost of imaging performance; the spatial resolution and sensitivity were 2.6 mm and 5.1% for the open mode and 2.1 mm and 7.3% for the closed mode. We concluded that the AS-SROP can minimize the decrease of resolution and sensitivity, for example, by transforming into the closed mode immediately after the irradiation while maintaining the open space only for the in-beam PET measurement.

  17. Transforming Graphical System Models to Graphical Attack Models

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, Rene Rydhof;

    2016-01-01

    approach to transforming graphical system models to graphical attack models in the form of attack trees. Based on an asset in the model, our transformations result in an attack tree that represents attacks by all possible actors in the model, after which the actor in question has obtained the asset....

  18. Control architecture of power systems: Modeling of purpose and function

    DEFF Research Database (Denmark)

    Heussen, Kai; Saleem, Arshad; Lind, Morten

    2009-01-01

    Many new technologies with novel control capabilities have been developed in the context of “smart grid” research. However, often it is not clear how these capabilities should best be integrated in the overall system operation. New operation paradigms change the traditional control architecture of...... power systems and it is necessary to identify requirements and functions. How does new control architecture fit with the old architecture? How can power system functions be specified independent of technology? What is the purpose of control in power systems? In this paper, a method suitable for...... semantically consistent modeling of control architecture is presented. The method, called Multilevel Flow Modeling (MFM), is applied to the case of system balancing. It was found that MFM is capable of capturing implicit control knowledge, which is otherwise difficult to formalize. The method has possible...

  19. Supporting crosscutting concern modelling in software architecture design

    Institute of Scientific and Technical Information of China (English)

    CAO Donggang; MEI Hong; ZHOU Minghui

    2007-01-01

    Crosscutting concerns such as logging,security,and transaction,are well supported in the programming level by aspect-oriented programming technologies.However,addressing these issues in the high-level architecture design still remains open.This paper presents a novel approach to supporting crosscutting concern modelling in the software architecture design of component-based systems.We introduce a new element named "Aspect"into our architecture description language,ABC/ADL,to clearly model the behavior of crosscutting concerns.Aspect is the first class entity as Component and Connector in ABC/ADL.ABC/ADL Connectors provide the weaving points where the component and aspect crosscut.This approach effectively enables "separation of concerns" in high-level architecture design,and facilitates black-box reuse of COTS components.

  20. A new model for designing uncertain enterprise architecture

    Directory of Open Access Journals (Sweden)

    Jamshid Afshani

    2012-04-01

    Full Text Available C4ISR framework describes architecture in three views of information architecture and defines a set of products, which are main outputs of enterprise architecture design. Formats and templates, which are presented for C4ISR products, cannot describe uncertainty in process or data. Meanwhile, uncertainty in many information systems is unavoidable and using the concept of fuzzy numbers in architecture design helps architects handle uncertainty in process and data of organization. In this paper, we present a new template based on fuzzy-UML concept for some of C4ISR products such as Logical Data Model (OV-7, Operational Event/Trace Description (OV-6c and Systems Event/Trace Description (SV-10c. To explain further, fictional Fast Pass system used at OilCo gas stations is used to demonstrate details of our proposed model.

  1. Integration of the Self-Healing eDNA Architecture in a Liquid Crystal Waveguide-based Fourier Transform Spectrometer

    DEFF Research Database (Denmark)

    Boesen, Michael Reibel; Keymeulen, D.; Madsen, Jan;

    2011-01-01

    In this work we describe the first real world case study for the self-healing eDNA (electronic DNA) architecture by implementing the control and data processing of a Fourier Transform Spectrometer (FTS) on an eDNA prototype. For this purpose the eDNA prototype has been ported from a Xilinx Virtex...

  2. Demand Activated Manufacturing Architecture (DAMA) model for supply chain collaboration

    Energy Technology Data Exchange (ETDEWEB)

    CHAPMAN,LEON D.; PETERSEN,MARJORIE B.

    2000-03-13

    The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise architecture and collaborative model for supply chains. This model will enable improved collaborative business across any supply chain. The DAMA Model for Supply Chain Collaboration is a high-level model for collaboration to achieve Demand Activated Manufacturing. The five major elements of the architecture to support collaboration are (1) activity or process, (2) information, (3) application, (4) data, and (5) infrastructure. These five elements are tied to the application of the DAMA architecture to three phases of collaboration - prepare, pilot, and scale. There are six collaborative activities that may be employed in this model: (1) Develop Business Planning Agreements, (2) Define Products, (3) Forecast and Plan Capacity Commitments, (4) Schedule Product and Product Delivery, (5) Expedite Production and Delivery Exceptions, and (6) Populate Supply Chain Utility. The Supply Chain Utility is a set of applications implemented to support collaborative product definition, forecast visibility, planning, scheduling, and execution. The DAMA architecture and model will be presented along with the process for implementing this DAMA model.

  3. Application of an analytical phase transformation model

    Institute of Scientific and Technical Information of China (English)

    LIU Feng; WANG Hai-feng; YANG Chang-lin; CHEN Zheng; YANG Wei; YANG Gen-cang

    2006-01-01

    Employing isothermal and isochronal differential scanning calorimetry, an analytical phase transformation model was used to study the kinetics of crystallization of amorphous Mg82.3Cu17.7 and Pd40Cu30P20Ni10 alloys. The analytical model comprised different combinations of various nucleation and growth mechanisms for a single transformation. Applying different combinations of nucleation and growth mechanisms, the nucleation and growth modes and the corresponding kinetic and thermodynamic parameters, have been determined. The influence of isothermal pre-annealing on subsequent isochronal crystallization kinetics with the increase of pre-annealing can be analyzed. The results show that the changes of the growth exponent, n, and the effective overall activation energy Q, occurring as function of the degree of transformation, do not necessarily imply a change of nucleation and growth mechanisms, i.e. such changes can occur while the transformation is isokinetic.

  4. Research on Architecture of Enterprise Modeling in Workflow System

    Institute of Scientific and Technical Information of China (English)

    李伟平; 齐慧彬; 薛劲松; 朱云龙

    2002-01-01

    The market that an enterprise is faced is changing and can 't be forecastedaccurately in this information time. In order to find the chances in the marketpractitioners have focused on business processes through their re-engineeringprogramme to improve enterprise efficiency. It is necessary to manage an enterpriseusing process-based method for the requirement of enhancing work efficiency and theability of competition in the market. And information system developers haveemphasized the use of standard models to accelerate the speed of configuration andimplementation of integrated systems for enterprises. So we have to model anenterprise with process-based modeling method. An architecture of enterprise modelingis presented in this paper. This architecture is composed of four views and supportingthe whole lifecycle of enterprise model. Because workflow management system is basedon process definition, this architecture can be directly used in the workflowmanagement system. The implement method of this model was thoroughly describedmeanwhile the workflow management software supporting the building and running themodel was also given.

  5. Detailed Primitive-Based 3d Modeling of Architectural Elements

    Science.gov (United States)

    Remondino, F.; Lo Buglio, D.; Nony, N.; De Luca, L.

    2012-07-01

    The article describes a pipeline, based on image-data, for the 3D reconstruction of building façades or architectural elements and the successive modeling using geometric primitives. The approach overcome some existing problems in modeling architectural elements and deliver efficient-in-size reality-based textured 3D models useful for metric applications. For the 3D reconstruction, an opensource pipeline developed within the TAPENADE project is employed. In the successive modeling steps, the user manually selects an area containing an architectural element (capital, column, bas-relief, window tympanum, etc.) and then the procedure fits geometric primitives and computes disparity and displacement maps in order to tie visual and geometric information together in a light but detailed 3D model. Examples are reported and commented.

  6. The Aalborg model of teaching in Architecture

    DEFF Research Database (Denmark)

    Knudstrup, Mary-Ann

    2008-01-01

    The building and construction industry is today facing great challenges due to the fact that energy consumption will have to be reduced to a considerable degree within the next few years in order to ensure that no further damage is done to the global environment. The industry is thus facing major...... Aalborg University to develop teaching methods that are tailored to dealing with current societal/technological issues. In terms of both research and teaching, Aalborg University utilises an interdisciplinary approach to a considerable extent. Furthermore, the teaching side is characterised by working...... sustainable environmental architecture. We use a model called the Integrated Design Process, or IDP, which is a hybrid method of designing integrated architecture in an interdisciplinary approach between architecture and engineering. The Integrated Design Process focuses on combining architecture, design...

  7. Transforming Software Business Models into Business Processes

    OpenAIRE

    Schief, Markus; Bonakdar, Amir; Weiblen, Tobias

    2012-01-01

    Changed business models, such as induced by Software-as-a-Service, require an effective implementation in a firm's organization. This study clarifies the relation between business models as an implementation of a company's strategy, and business processes, as an abstraction of a company's operations. The presented transformation framework provides specific meaning to the industrial setting of a software vendor morphing to a SaaS model. Both underlying concepts, the business model and the valu...

  8. Building a Verilog model for Boundary-Scan architecture

    International Nuclear Information System (INIS)

    This report presents a short introduction of the Boundary-Scan technique, as well as a model designed by Verilog HDL to implement the Boundary-Scan architecture. The idea of Boundary-Scan architecture provides a non-contact method of accessing chip pins during testing. The model implemented by Verilog is simple, but expresses the spirit of the standard very well. As this model is compatible with the IEEE 1149.1 standard it provides the possibility of implementing it in the real world. 11 refs., 11 figs., 2 tabs

  9. Layered Ontological Modelling for Web Service-oriented Model-Driven Architecture

    OpenAIRE

    Pahl, Claus

    2005-01-01

    Modelling is recognised as an essential activity in the architectural design of software systems. Model-driven architecture (MDA) is a framework implementing this idea. Ontologies are knowledge representation frameworks that are ideally suited to support modelling in this endeavour. We propose here a layered ontological framework that addresses domain modelling, architectural modelling, and interoperability aspects in the development of service-based software systems. We ...

  10. Pattern-based software architecture for service-oriented software systems

    OpenAIRE

    Barrett Ronan; Pahl Claus

    2010-01-01

    Service-oriented architecture is a recent conceptual framework for service-oriented software platforms. Architectures are of great importance for the evolution of software systems. We present a modelling and transformation technique for service-centric distributed software systems. Architectural configurations, expressed through hierarchical architectural patterns, form the core of a specification and transformation technique. Patterns on different levels of abstraction form transformation...

  11. Evolution of Modelling Techniques for Service Oriented Architecture

    Directory of Open Access Journals (Sweden)

    Mikit Kanakia

    2014-07-01

    Full Text Available Service-oriented architecture (SOA is a software design and architecture design pattern based on independent pieces of software providing functionality as services to other applications. The benefit of SOA in the IT infrastructure is to allow parallel use and data exchange between programs which are services to the enterprise. Unified Modelling Language (UML is a standardized general-purpose modelling language in the field of software engineering. The UML includes a set of graphic notation techniques to create visual models of object-oriented software systems. We want to make UML available for SOA as well. SoaML (Service oriented architecture Modelling Language is an open source specification project from the Object Management Group (OMG, describing a UML profile and meta-model for the modelling and design of services within a service-oriented architecture. BPMN was also extended for SOA but there were few pitfalls. There is a need of a modelling framework which dedicated to SOA. Michael Bell authored a framework called Service Oriented Modelling Framework (SOMF which is dedicated for SOA.

  12. Oil transformation sector modelling: price interactions

    International Nuclear Information System (INIS)

    A global oil and oil product prices evolution model is proposed that covers the transformation sector incidence and the final user price establishment together with price interactions between gaseous and liquid hydrocarbons. High disparities among oil product prices in the various consumer zones (North America, Western Europe, Japan) are well described and compared with the low differences between oil supply prices in these zones. Final user price fluctuations are shown to be induced by transformation differences and competition; natural gas market is also modelled

  13. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    derivative products are not completely defined. Yet, decisions need to be made during technology development on the capabilities to be provided through the development to fulfil future application requirements,provide a foundation for future products, and development of a production system capable of...... producing future products and supporting technology development through prototype production.To support technology development aimed at a broad range of application requirements,two modelling frameworks are introduced: the product technology architecture modelling framework and the production architecture......This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requirements...

  14. An architecture for integration of multidisciplinary models

    DEFF Research Database (Denmark)

    Belete, Getachew F.; Voinov, Alexey; Holst, Niels

    2014-01-01

    Integrating multidisciplinary models requires linking models: that may operate at different temporal and spatial scales; developed using different methodologies, tools and techniques; different levels of complexity; calibrated for different ranges of inputs and outputs, etc. On the other hand, in...

  15. Software system architecture modeling methodology for naval gun weapon systems

    OpenAIRE

    Rivera, Joey

    2010-01-01

    This dissertation describes the development of an architectural modeling methodology that supports the Navy's requirement to evaluate potential changes to gun weapon systems in order to identify potential software safety risks. The modeling methodology includes a tool (Eagle6) that is based on the Monterey Phoenix (MP) modeling methodology, and has the capability to create and verify MP models, execute formal assertions via pre-defined macro commands, and a visualization tool that gener...

  16. Plant growth and architectural modelling and its applications

    OpenAIRE

    Guo, Yan; Fourcaud, Thierry; Jaeger, Marc; Zhang, Xiaopeng; Li, Baoguo

    2011-01-01

    Over the last decade, a growing number of scientists around the world have invested in research on plant growth and architectural modelling and applications (often abbreviated to plant modelling and applications, PMA). By combining physical and biological processes, spatially explicit models have shown their ability to help in understanding plant–environment interactions. This Special Issue on plant growth modelling presents new information within this topic, which are summarized in this pref...

  17. Distributed Mathematical Model Simulation on a Parallel Architecture

    OpenAIRE

    Kvasnica, Peter; Kvasnica, Igor

    2012-01-01

    The aim of this article is to discuss the design of distributed mathematical models and suitable parallel architecture of computers. The paper summarises the author’s experience with mathematical modelling of decomposed information systems of a simulator. Conclusions are based on the theory of the design of the computer control systems. The author describes computers that create a distributed computer system of a flight simulator. Modelling of a time precision of mathematical model of the spe...

  18. A Cloud Computing Collaborative Architecture Model

    OpenAIRE

    Ali Bagherinia; Sohrab Hojjatkhah; Ali Jouharpoor; Akbar Bemana

    2012-01-01

    This research work present a model to execute long computational and other service in cloud computing that couldnt be executing in single computer system alone. While in all other existing cloud computing model users must pay cost for using cloud services this model is based on collaborative between each using system with other systems that they need to other services.

  19. An architectural model for software reliability quantification: sources of data

    International Nuclear Information System (INIS)

    Software reliability assessment models in use today treat software as a monolithic block. An aversion towards 'atomic' models seems to exist. These models appear to add complexity to the modeling, to the data collection and seem intrinsically difficult to generalize. In 1997, we introduced an architecturally based software reliability model called FASRE. The model is based on an architecture derived from the requirements which captures both functional and nonfunctional requirements and on a generic classification of functions, attributes and failure modes. The model focuses on evaluation of failure mode probabilities and uses a Bayesian quantification framework. Failure mode probabilities of functions and attributes are propagated to the system level using fault trees. It can incorporate any type of prior information such as results of developers' testing, historical information on a specific functionality and its attributes, and, is ideally suited for reusable software. By building an architecture and deriving its potential failure modes, the model forces early appraisal and understanding of the weaknesses of the software, allows reliability analysis of the structure of the system, provides assessments at a functional level as well as at a systems' level. In order to quantify the probability of failure (or the probability of success) of a specific element of our architecture, data are needed. The term element of the architecture is used here in its broadest sense to mean a single failure mode or a higher level of abstraction such as a function. The paper surveys the potential sources of software reliability data available during software development. Next the mechanisms for incorporating these sources of relevant data to the FASRE model are identified

  20. Theory and Model for Martensitic Transformations

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker; Mouritsen, Ole G.

    1986-01-01

    Martensitic transformations are shown to be driven by the interplay between two fluctuating strain components. No soft mode is needed, but a central peak occurs representing the dynamics of strain clusters. A two-dimensional magnetic-analog model with the martensitic-transition symmetry is constr...... constructed and analyzed by computer simulation and by a theory which accounts for correlation effects. Dramatic precursor effects at the first-order transition are demonstrated. The model is also of relevance for surface reconstruction transitions....

  1. Improving Project Management Using Formal Models and Architectures

    Science.gov (United States)

    Kahn, Theodore; Sturken, Ian

    2011-01-01

    This talk discusses the advantages formal modeling and architecture brings to project management. These emerging technologies have both great potential and challenges for improving information available for decision-making. The presentation covers standards, tools and cultural issues needing consideration, and includes lessons learned from projects the presenters have worked on.

  2. Cucumber: a model angiosperm for mitochondrial transformation?

    Science.gov (United States)

    Havey, Michael J; Lilly, Jason W; Bohanec, Borut; Bartoszewski, Grzegorz; Malepszy, Stefan

    2002-01-01

    Plants possess three major genomes, carried in the chloroplast, mitochondrion, and nucleus. The chloroplast genomes of higher plants tend to be of similar sizes and structure. In contrast both the nuclear and mitochondrial genomes show great size differences, even among closely related species. The largest plant mitochondrial genomes exist in the genus Cucumis at 1500 to 2300 kilobases, over 100 times the sizes of the yeast or human mitochondrial genomes. Biochemical and molecular analyses have established that the huge Cucumis mitochondrial genomes are due to extensive duplication of short repetitive DNA motifs. The organellar genomes of almost all organisms are maternally transmitted and few methods exist to manipulate these important genomes. Although chloroplast transformation has been achieved, no routine method exists to transform the mitochondrial genome of higher plants. A mitochondrial-transformation system for a higher plant would allow geneticists to use reverse genetics to study mitochondrial gene expression and to establish the efficacy of engineered mitochondrial genes for the genetic improvement of the mitochondrial genome. Cucumber possesses three unique attributes that make it a potential model system for mitochondrial transformation of a higher plant. Firstly, its mitochondria show paternal transmission. Secondly, microspores possess relatively few, huge mitochondria. Finally, there exists in cucumber unique mitochondrial mutations conditioning strongly mosaic (msc) phenotypes. The msc phenotypes appear after regeneration of plants from cell culture and sort with specific rearranged and deleted regions in the mitochondrial genome. These mitochondrial deletions may be a useful genetic tool to develop selectable markers for mitochondrial transformation of higher plants. PMID:12084966

  3. Modeling Virtual Organization Architecture with the Virtual Organization Breeding Methodology

    CERN Document Server

    Paszkiewicz, Zbigniew

    2011-01-01

    While Enterprise Architecture Modeling (EAM) methodologies become more and more popular, an EAM methodology tailored to the needs of virtual organizations (VO) is still to be developed. Among the most popular EAM methodologies, TOGAF has been chosen as the basis for a new EAM methodology taking into account characteristics of VOs presented in this paper. In this new methodology, referred as Virtual Organization Breeding Methodology (VOBM), concepts developed within the ECOLEAD project, e.g. the concept of Virtual Breeding Environment (VBE) or the VO creation schema, serve as fundamental elements for development of VOBM. VOBM is a generic methodology that should be adapted to a given VBE. VOBM defines the structure of VBE and VO architectures in a service-oriented environment, as well as an architecture development method for virtual organizations (ADM4VO). Finally, a preliminary set of tools and methods for VOBM is given in this paper.

  4. Modeling Virtual Organization Architecture with the Virtual Organization Breeding Methodology

    Science.gov (United States)

    Paszkiewicz, Zbigniew; Picard, Willy

    While Enterprise Architecture Modeling (EAM) methodologies become more and more popular, an EAM methodology tailored to the needs of virtual organizations (VO) is still to be developed. Among the most popular EAM methodologies, TOGAF has been chosen as the basis for a new EAM methodology taking into account characteristics of VOs presented in this paper. In this new methodology, referred as Virtual Organization Breeding Methodology (VOBM), concepts developed within the ECOLEAD project, e.g. the concept of Virtual Breeding Environment (VBE) or the VO creation schema, serve as fundamental elements for development of VOBM. VOBM is a generic methodology that should be adapted to a given VBE. VOBM defines the structure of VBE and VO architectures in a service-oriented environment, as well as an architecture development method for virtual organizations (ADM4VO). Finally, a preliminary set of tools and methods for VOBM is given in this paper.

  5. Dependencies among Architectural Views Got from Software Requirements Based on a Formal Model

    Directory of Open Access Journals (Sweden)

    Osis Janis

    2014-12-01

    Full Text Available A system architect has software requirements and some unspecified knowledge about a problem domain (e.g., an enterprise as source information for assessment and evaluation of possible solutions and getting the target point, a preliminary software design. The solving factor is architect’s experience and expertise in the problem domain (“AS-IS”. A proposed approach is dedicated to assist a system architect in making an appropriate decision on the solution (“TO-BE”. It is based on a formal mathematical model, Topological Functioning Model (TFM. Compliant TFMs can be transformed into software architectural views. The paper demonstrates and discusses tracing dependency links from the requirements to and between the architectural views.

  6. A Model for the Development of Architectural Psychology Formation in Architectural Education

    OpenAIRE

    Semra Sema UZUNOĞLU; Harun ÖZER

    2014-01-01

    This article examines the purpose, method, and outcomes of an “Architectural Psychology” program, developed to introduce new architecture students to the subject. A combination of the architectural concepts of Social Psychology, Environmental Psychology and Psychology of Perception were used in the program. Psychology of Architecture will be taught simultaneously with the Introduction to Architecture program in a student-based educational system to help students understand psychology with its...

  7. Towards a Transformation Model of a Pedagogy Collaborative Project (PCP) Scenario

    OpenAIRE

    Maroua AULAD BEN TAHAR; Az-eddine NASSEH; Khaldi, Mohamed

    2014-01-01

    In this paper, we propose a meta-model for Pedagogy Collaborative Project (PCP) allows the teacher to develop a PCP scenario. The latter is able to be applied into a PCP scenario for a training platform that is not a priori designed for this teaching method. We describe an MDA (Model Driven Architecture) approach to develop transformation rules between the meta-model and the PCP training platform. To illustrate this proposal, the Moodle platform is chosen as a case study.

  8. Hybrid Model Based Testing Tool Architecture for Exascale Computing System

    Directory of Open Access Journals (Sweden)

    Muhammad Usman Ashraf

    2015-09-01

    Full Text Available Exascale computing refers to a computing system which is capable to at least one exaflop in next couple of years. Many new programming models, architectures and algorithms have been introduced to attain the objective for exascale computing system. The primary objective is to enhance the system performance. In modern/super computers, GPU is being used to attain the high computing performance. However, it’s the objective of proposed technologies and programming models is almost same to make the GPU more powerful. But these technologies are still facing the number of challenges including parallelism, scale and complexity and also many more that must be fixed to achieve make computing system more powerful and efficient. In this paper, we have present a testing tool architecture for a parallel programming approach using two programming models as CUDA and OpenMP. Both CUDA and OpenMP could be used to program shared memory and GPU cores. The object of this architecture is to identify the static errors in the program that occurred during writing the code and cause absence of parallelism. Our architecture enforces the developers to write the feasible code through we can avoid from the essential errors in the program and run successfully.

  9. Architecture, modeling, and analysis of a plasma impedance probe

    Science.gov (United States)

    Jayaram, Magathi

    Variations in ionospheric plasma density can cause large amplitude and phase changes in the radio waves passing through this region. Ionospheric weather can have detrimental effects on several communication systems, including radars, navigation systems such as the Global Positioning Sytem (GPS), and high-frequency communications. As a result, creating models of the ionospheric density is of paramount interest to scientists working in the field of satellite communication. Numerous empirical and theoretical models have been developed to study the upper atmosphere climatology and weather. Multiple measurements of plasma density over a region are of marked importance while creating these models. The lack of spatially distributed observations in the upper atmosphere is currently a major limitation in space weather research. A constellation of CubeSat platforms would be ideal to take such distributed measurements. The use of miniaturized instruments that can be accommodated on small satellites, such as CubeSats, would be key to achieving these science goals for space weather. The accepted instrumentation techniques for measuring the electron density are the Langmuir probes and the Plasma Impedance Probe (PIP). While Langmuir probes are able to provide higher resolution measurements of relative electron density, the Plasma Impedance Probes provide absolute electron density measurements irrespective of spacecraft charging. The central goal of this dissertation is to develop an integrated architecture for the PIP that will enable space weather research from CubeSat platforms. The proposed PIP chip integrates all of the major analog and mixed-signal components needed to perform swept-frequency impedance measurements. The design's primary innovation is the integration of matched Analog-to-Digital Converters (ADC) on a single chip for sampling the probes current and voltage signals. A Fast Fourier Transform (FFT) is performed by an off-chip Field-Programmable Gate Array (FPGA

  10. Transformer Model for Transient Recovery Voltage at Transformer Limited Fault Current Interruption

    OpenAIRE

    MYO, MIN THEIN

    2012-01-01

    Chapter1 Introduction||Chapter2 Frequency Response Analysis||Chapter3 Investigation of Transformer Model for Transient Recovery Voltage Calculation at Transformer Limited Fault Condition by EMTP||Chapter4 Investigation of TRV under Transformer Limited Fault Condition by Frequency Dependent Equivalent Circuit||Chapter5 Study of Transformer Iron Core Characteristics at a High Frequency||Chapter6 Conclusion

  11. Architectural pattern generation by discrete wavelet transform and utilisation in structural design

    NARCIS (Netherlands)

    Sariyildiz, S.; Ciftcioglu, O.; Durmisevic, S.

    1998-01-01

    Since computers were introduced in architectural design as a valuable tool, there was a growing need to develop tools that would support the designer from the initial phase of the design till the detailing. In a computer aided architectural design environment it is feasible to stimulate the spatial

  12. Multiscale Modeling of Phase Transformations in Steels

    Science.gov (United States)

    Militzer, M.; Hoyt, J. J.; Provatas, N.; Rottler, J.; Sinclair, C. W.; Zurob, H. S.

    2014-05-01

    Multiscale modeling tools have great potential to aid the development of new steels and processing routes. Currently, industrial process models are at least in part based on empirical material parameters to describe microstructure evolution and the resulting material properties. Modeling across different length and time scales is a promising approach to develop next-generation process models with enhanced predictive capabilities for the role of alloying elements. The status and challenges of this multiscale modeling approach are discussed for microstructure evolution in advanced low-carbon steels. First-principle simulations of solute segregation to a grain boundary and an austenite-ferrite interface in iron confirm trends of important alloying elements (e.g., Nb, Mo, and Mn) on grain growth, recrystallization, and phase transformation in steels. In particular, the linkage among atomistic simulations, phase-field modeling, and classic diffusion models is illustrated for the effects of solute drag on the austenite-to-ferrite transformation as observed in dedicated experimental studies for iron model alloys and commercial steels.

  13. USE OF SCALE MODELING FOR ARCHITECTURAL ACOUSTIC MEASUREMENTS

    OpenAIRE

    ERÖZ, Ferhat

    2013-01-01

    In recent years, acoustic science and hearing has become important. Acoustic design used in tests of acoustic devices is crucial. Sound propagation is a complex subject, especially inside enclosed spaces. From the 19th century on, the acoustic measurements and tests were carried out using modeling techniques that are based on room acoustic measurement parameters.In this study, the effects of architectural acoustic design of modeling techniques and acoustic parameters were studied. In this con...

  14. System Architecture Modeling for Technology Portfolio Management using ATLAS

    Science.gov (United States)

    Thompson, Robert W.; O'Neil, Daniel A.

    2006-01-01

    Strategic planners and technology portfolio managers have traditionally relied on consensus-based tools, such as Analytical Hierarchy Process (AHP) and Quality Function Deployment (QFD) in planning the funding of technology development. While useful to a certain extent, these tools are limited in the ability to fully quantify the impact of a technology choice on system mass, system reliability, project schedule, and lifecycle cost. The Advanced Technology Lifecycle Analysis System (ATLAS) aims to provide strategic planners a decision support tool for analyzing technology selections within a Space Exploration Architecture (SEA). Using ATLAS, strategic planners can select physics-based system models from a library, configure the systems with technologies and performance parameters, and plan the deployment of a SEA. Key parameters for current and future technologies have been collected from subject-matter experts and other documented sources in the Technology Tool Box (TTB). ATLAS can be used to compare the technical feasibility and economic viability of a set of technology choices for one SEA, and compare it against another set of technology choices or another SEA. System architecture modeling in ATLAS is a multi-step process. First, the modeler defines the system level requirements. Second, the modeler identifies technologies of interest whose impact on an SEA. Third, the system modeling team creates models of architecture elements (e.g. launch vehicles, in-space transfer vehicles, crew vehicles) if they are not already in the model library. Finally, the architecture modeler develops a script for the ATLAS tool to run, and the results for comparison are generated.

  15. A Model-Driven Architecture Approach for Modeling, Specifying and Deploying Policies in Autonomous and Autonomic Systems

    Science.gov (United States)

    Pena, Joaquin; Hinchey, Michael G.; Sterritt, Roy; Ruiz-Cortes, Antonio; Resinas, Manuel

    2006-01-01

    Autonomic Computing (AC), self-management based on high level guidance from humans, is increasingly gaining momentum as the way forward in designing reliable systems that hide complexity and conquer IT management costs. Effectively, AC may be viewed as Policy-Based Self-Management. The Model Driven Architecture (MDA) approach focuses on building models that can be transformed into code in an automatic manner. In this paper, we look at ways to implement Policy-Based Self-Management by means of models that can be converted to code using transformations that follow the MDA philosophy. We propose a set of UML-based models to specify autonomic and autonomous features along with the necessary procedures, based on modification and composition of models, to deploy a policy as an executing system.

  16. On Estimation of Partially Linear Transformation Models.

    Science.gov (United States)

    Lu, Wenbin; Zhang, Hao Helen

    2010-06-01

    We study a general class of partially linear transformation models, which extend linear transformation models by incorporating nonlinear covariate effects in survival data analysis. A new martingale-based estimating equation approach, consisting of both global and kernel-weighted local estimation equations, is developed for estimating the parametric and nonparametric covariate effects in a unified manner. We show that with a proper choice of the kernel bandwidth parameter, one can obtain the consistent and asymptotically normal parameter estimates for the linear effects. Asymptotic properties of the estimated nonlinear effects are established as well. We further suggest a simple resampling method to estimate the asymptotic variance of the linear estimates and show its effectiveness. To facilitate the implementation of the new procedure, an iterative algorithm is developed. Numerical examples are given to illustrate the finite-sample performance of the procedure. PMID:20802823

  17. Multiphase Transformer Modelling using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Nor Azizah Mohd Yusoff

    2015-03-01

    Full Text Available In the year of 1970 saw the starting invention of the five-phase motor as the milestone in advanced electric motor. Through the years, there are many researchers, which passionately worked towards developing for multiphase drive system. They developed a static transformation system to obtain a multiphase supply from the available three-phase supply. This idea gives an influence for further development in electric machines as an example; an efficient solution for bulk power transfer. This paper highlighted the detail descriptions that lead to five-phase supply with fixed voltage and frequency by using Finite-Element Method (FEM. Identifying of specification on a real transformer had been done before applied into software modeling. Therefore, Finite-Element Method provides clearly understandable in terms of visualize the geometry modeling, connection scheme and output waveform.

  18. Economic assessment model architecture for AGC/AVLIS selection

    International Nuclear Information System (INIS)

    The economic assessment model architecture described provides the flexibility and completeness in economic analysis that the selection between AGC and AVLIS demands. Process models which are technology-specific will provide the first-order responses of process performance and cost to variations in process parameters. The economics models can be used to test the impacts of alternative deployment scenarios for a technology. Enterprise models provide global figures of merit for evaluating the DOE perspective on the uranium enrichment enterprise, and business analysis models compute the financial parameters from the private investor's viewpoint

  19. A METHOD FOR THE DEVELOPMENT OF PLATFORM MODELS IN THE MODEL DRIVEN ARCHITECTURE CONTEXT

    Directory of Open Access Journals (Sweden)

    Paulo Cezar Stadzisz

    2012-01-01

    Full Text Available The application of the Model Driven Architecture (MDA approach to the design of embedded software based on Real-Time Operating Systems (RTOS is encouraged by the fact that such software has a wide variety of platforms. In this way, the creation of methods for the development of platform models that meet such diversity of platforms is necessary. This study proposes a method called PM-MDA for the development of platform models that design embedded software based on RTOS in the context of MDA. In addition, this study defines the swxRTOS metamodel, a UML 2.0 profile for RTOS based on embedded software design. Such profile defines a set of stereotypes to describe Platform Models (PMs and is intended to generically describe the services provided by a given embedded system platform of the RTOS. This profile promotes the creation of Platform Models, which will be used as input parameters in the model transformation. Due to the inherent complexity in embedded software design and the existence of a wide variety of platform models, new methods that support the development of such software become crucial.

  20. A flexible architecture for modeling and simulation of diffusional association

    CERN Document Server

    Haack, Fiete; Uhrmacher, Adelinde M; 10.4204/EPTCS.19.5

    2010-01-01

    Up to now, it is not possible to obtain analytical solutions for complex molecular association processes (e.g. Molecule recognition in Signaling or catalysis). Instead Brownian Dynamics (BD) simulations are commonly used to estimate the rate of diffusional association, e.g. to be later used in mesoscopic simulations. Meanwhile a portfolio of diffusional association (DA) methods have been developed that exploit BD. However, DA methods do not clearly distinguish between modeling, simulation, and experiment settings. This hampers to classify and compare the existing methods with respect to, for instance model assumptions, simulation approximations or specific optimization strategies for steering the computation of trajectories. To address this deficiency we propose FADA (Flexible Architecture for Diffusional Association) - an architecture that allows the flexible definition of the experiment comprising a formal description of the model in SpacePi, different simulators, as well as validation and analysis methods....

  1. Modeling of transformers using circuit simulators

    Energy Technology Data Exchange (ETDEWEB)

    Archer, W.E.; Deveney, M.F.; Nagel, R.L.

    1994-07-01

    Transformers of two different designs; and unencapsulated pot core and an encapsulated toroidal core have been modeled for circuit analysis with circuit simulation tools. We selected MicroSim`s PSPICE and Anology`s SABER as the simulation tools and used experimental BH Loop and network analyzer measurements to generate the needed input data. The models are compared for accuracy and convergence using the circuit simulators. Results are presented which demonstrate the effects on circuit performance from magnetic core losses, eddy currents, and mechanical stress on the magnetic cores.

  2. Research on the Adaptive Object-Model Architecture Style

    Institute of Scientific and Technical Information of China (English)

    YAO Hai-qiong; NI Gui-qiang

    2004-01-01

    The rapidly changing requirements and business rules stimulate software developers to make their applications more dynamic, configurable, and adaptable. An effective way to meet such requirements is to apply an adaptive object-model (AOM). The AOM architecture style is composed of metamodel, model engine and tools. Firstly, two small patterns for building up metamodel are analyzed in detail. Then model engine for interpreting metamodel and tools for end-uses to define and configure object models are discussed. Finally, a novel platform-applicationware-is proposed.

  3. Parallel In-place Model Transformations with LinTra

    OpenAIRE

    Burgueño, Loli; Troya, Javier; Wimmer, Manuel; Vallecillo, Antonio

    2015-01-01

    As software systems have grown large and complex in the last few years, the problems with which Model-Driven Development has to cope have increased at the same pace. In particular, the need to improve the performance and scalability of model transformations has become a critical issue. In previous work we introduced LinTra, a model transformation platform for the parallel execution of out-place model transformations. Nevertheless, in-place model transformations are required in several context...

  4. Coaching Model + Clinical Playbook = Transformative Learning.

    Science.gov (United States)

    Fletcher, Katherine A; Meyer, Mary

    2016-01-01

    Health care employers demand that workers be skilled in clinical reasoning, able to work within complex interprofessional teams to provide safe, quality patient-centered care in a complex evolving system. To this end, there have been calls for radical transformation of nursing education including the development of a baccalaureate generalist nurse. Based on recommendations from the American Association of Colleges of Nursing, faculty concluded that clinical education must change moving beyond direct patient care by applying the concepts associated with designer, manager, and coordinator of care and being a member of a profession. To accomplish this, the faculty utilized a system of focused learning assignments (FLAs) that present transformative learning opportunities that expose students to "disorienting dilemmas," alternative perspectives, and repeated opportunities to reflect and challenge their own beliefs. The FLAs collected in a "Playbook" were scaffolded to build the student's competencies over the course of the clinical experience. The FLAs were centered on the 6 Quality and Safety Education for Nurses competencies, with 2 additional concepts of professionalism and systems-based practice. The FLAs were competency-based exercises that students performed when not assigned to direct patient care or had free clinical time. Each FLA had a lesson plan that allowed the student and faculty member to see the competency addressed by the lesson, resources, time on task, student instructions, guide for reflection, grading rubric, and recommendations for clinical instructor. The major advantages of the model included (a) consistent implementation of structured learning experiences by a diverse teaching staff using a coaching model of instruction; (b) more systematic approach to present learning activities that build upon each other; (c) increased time for faculty to interact with students providing direct patient care; (d) guaranteed capture of selected transformative

  5. VMTL: a language for end-user model transformation

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2016-01-01

    Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently, these...... hope to broaden the application scope of model transformation and MDE technology in general. We discuss the profile of end-user modelers and propose a set of design guidelines for model transformation languages addressing them. We then introduce Visual Model Transformation Language (VMTL) following...

  6. Model-driven migration of supervisory machine control architectures

    OpenAIRE

    de Graaf B; Weber S.; van Deursen A.

    2008-01-01

    Supervisory machine control is the high-level control in advanced manufacturing machines that is responsible for the coordination of manufacturing activities. Traditionally, the design of such control systems is based on finite state machines. An alternative, more flexible approach is based on task-resource models. This paper describes an approach for the migration of supervisory machine control architectures towards this alternative approach. We propose a generic migration approach based on ...

  7. Multi-agent Architecture Model for Driving Mobile Manipulator Robots

    OpenAIRE

    Hentout, A.; Bouzouia, B.; Z. Toukal

    2008-01-01

    In this article, we present generic hierarchical behavior-based architecture model for driving mobile manipulator robots. Two behaviors are of high-level. They constitute the Supervisory agent, which manages the global system. Two others are of intermediate-level and finally one behavior is of low-level. These last ones constitute the Mobile Robot agent and the Manipulator Robot agent controlling, respectively, the mobile base and the manipulator arm. The choice of the suggest...

  8. HUGO: A Cognitive Architecture with an Incorporated World Model

    Czech Academy of Sciences Publication Activity Database

    Wiedermann, Jiří

    Paris : European Complex Systems Society, 2006 - (Jost, J.; Reed-Tsochas, F.; Schuster, P.), s. 1-15 ISBN 0-9554123-0-7. [ECCS '06. European Conference on Complex Systems. Oxford (GB), 25.09.2006-29.09.2006] R&D Projects: GA AV ČR 1ET100300419 Institutional research plan: CEZ:AV0Z10300504 Keywords : cognitive systems * complex systems * cognitive architecture * internal world models * mirror neurons Subject RIV: IN - Informatics, Computer Science

  9. The Architectural Designs of a Nanoscale Computing Model

    Directory of Open Access Journals (Sweden)

    Mary M. Eshaghian-Wilner

    2004-08-01

    Full Text Available A generic nanoscale computing model is presented in this paper. The model consists of a collection of fully interconnected nanoscale computing modules, where each module is a cube of cells made out of quantum dots, spins, or molecules. The cells dynamically switch between two states by quantum interactions among their neighbors in all three dimensions. This paper includes a brief introduction to the field of nanotechnology from a computing point of view and presents a set of preliminary architectural designs for fabricating the nanoscale model studied.

  10. From Principles to Details: Integrated Framework for Architecture Modelling of Large Scale Software Systems

    Directory of Open Access Journals (Sweden)

    Andrzej Zalewski

    2013-06-01

    Full Text Available There exist numerous models of software architecture (box models, ADL’s, UML, architectural decisions, architecture modelling frameworks (views, enterprise architecture frameworks and even standards recommending practice for the architectural description. We show in this paper, that there is still a gap between these rather abstract frameworks/standards and existing architecture models. Frameworks and standards define what should be modelled rather than which models should be used and how these models are related to each other. We intend to prove that a less abstract modelling framework is needed for the effective modelling of large scale software intensive systems. It should provide a more precise guidance kinds of models to be employed and how they should relate to each other. The paper defines principles that can serve as base for an integrated model. Finally, structure of such a model has been proposed. It comprises three layers: the upper one – architectural policy – reflects corporate policy and strategies in architectural terms, the middle one –system organisation pattern – represents the core structural concepts and their rationale at a given level of scope, the lower one contains detailed architecture models. Architectural decisions play an important role here: they model the core architectural concepts explaining detailed models as well as organise the entire integrated model and the relations between its submodels.

  11. A performance model of the OSI communication architecture

    Science.gov (United States)

    Kritzinger, P. S.

    1986-06-01

    An analytical model aiming at predicting the performance of software implementations which would be built according to the OSI basic reference model is proposed. The model uses the peer protocol standard of a layer as the reference description of an implementation of that layer. The model is basically a closed multiclass multichain queueing network with a processor-sharing center, modeling process contention at the processor, and a delay center, modeling times spent waiting for responses from the corresponding peer processes. Each individual transition of the protocol constitutes a different class and each layer of the architecture forms a closed chain. Performance statistics include queue lengths and response times at the processor as a function of processor speed and the number of open connections. It is shown how to reduce the model should the protocol state space become very large. Numerical results based upon the derived formulas are given.

  12. Managing changes in the enterprise architecture modelling context

    Science.gov (United States)

    Khanh Dam, Hoa; Lê, Lam-Son; Ghose, Aditya

    2016-07-01

    Enterprise architecture (EA) models the whole enterprise in various aspects regarding both business processes and information technology resources. As the organisation grows, the architecture of its systems and processes must also evolve to meet the demands of the business environment. Evolving an EA model may involve making changes to various components across different levels of the EA. As a result, an important issue before making a change to an EA model is assessing the ripple effect of the change, i.e. change impact analysis. Another critical issue is change propagation: given a set of primary changes that have been made to the EA model, what additional secondary changes are needed to maintain consistency across multiple levels of the EA. There has been however limited work on supporting the maintenance and evolution of EA models. This article proposes an EA description language, namely ChangeAwareHierarchicalEA, integrated with an evolution framework to support both change impact analysis and change propagation within an EA model. The core part of our framework is a technique for computing the impact of a change and a new method for generating interactive repair plans from Alloy consistency rules that constrain the EA model.

  13. Energy consumption model over parallel programs implemented on multicore architectures

    Directory of Open Access Journals (Sweden)

    Ricardo Isidro-Ramirez

    2015-06-01

    Full Text Available In High Performance Computing, energy consump-tion is becoming an important aspect to consider. Due to the high costs that represent energy production in all countries it holds an important role and it seek to find ways to save energy. It is reflected in some efforts to reduce the energy requirements of hardware components and applications. Some options have been appearing in order to scale down energy use and, con-sequently, scale up energy efficiency. One of these strategies is the multithread programming paradigm, whose purpose is to produce parallel programs able to use the full amount of computing resources available in a microprocessor. That energy saving strategy focuses on efficient use of multicore processors that are found in various computing devices, like mobile devices. Actually, as a growing trend, multicore processors are found as part of various specific purpose computers since 2003, from High Performance Computing servers to mobile devices. However, it is not clear how multiprogramming affects energy efficiency. This paper presents an analysis of different types of multicore-based architectures used in computing, and then a valid model is presented. Based on Amdahl’s Law, a model that considers different scenarios of energy use in multicore architectures it is proposed. Some interesting results were found from experiments with the developed algorithm, that it was execute of a parallel and sequential way. A lower limit of energy consumption was found in a type of multicore architecture and this behavior was observed experimentally.

  14. A new global GIS architecture based on STQIE model

    Science.gov (United States)

    Cheng, Chengqi; Guan, Li; Guo, Shide; Pu, Guoliang; Sun, Min

    2007-06-01

    Global GIS is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. A new Global GIS architecture based on STQIE model is designed in this paper, according to the computer cluster theory, the space-time integration technology and the virtual real technology. There is four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. In this paper a global 3D prototype system is developed taking advantage of C++ language according to the above thought. This system integrated the simulation system with GIS, and supported display of multi-resolution DEM, image and multi-dimensional static or dynamic 3D objects.

  15. Laplace transform in tracer kinetic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hauser, Eliete B., E-mail: eliete@pucrs.br [Instituto do Cerebro (InsCer/FAMAT/PUC-RS), Porto Alegre, RS, (Brazil). Faculdade de Matematica

    2013-07-01

    The main objective this paper is to quantify the pharmacokinetic processes: absorption, distribution and elimination of radiopharmaceutical(tracer), using Laplace transform method. When the drug is administered intravenously absorption is complete and is available in the bloodstream to be distributed throughout the whole body in all tissues and fluids, and to be eliminated. Mathematical modeling seeks to describe the processes of distribution and elimination through compartments, where distinct pools of tracer (spatial location or chemical state) are assigned to different compartments. A compartment model is described by a system of differential equations, where each equation represents the sum of all the transfer rates to and from a specific compartment. In this work a two-tissue irreversible compartment model is used for description of tracer, [{sup 18}F]2-fluor-2deoxy-D-glucose. In order to determine the parameters of the model, it is necessary to have information about the tracer delivery in the form of an input function representing the time-course of tracer concentration in arterial blood or plasma. We estimate the arterial input function in two stages and apply the Levenberg-Marquardt Method to solve nonlinear regressions. The transport of FDG across de arterial blood is very fast in the first ten minutes and then decreases slowly. We use de Heaviside function to represent this situation and this is the main contribution of this study. We apply the Laplace transform and the analytical solution for two-tissue irreversible compartment model is obtained. The only approach is to determinate de arterial input function. (author)

  16. SpaceWire model development technology for satellite architecture.

    Energy Technology Data Exchange (ETDEWEB)

    Eldridge, John M.; Leemaster, Jacob Edward; Van Leeuwen, Brian P.

    2011-09-01

    Packet switched data communications networks that use distributed processing architectures have the potential to simplify the design and development of new, increasingly more sophisticated satellite payloads. In addition, the use of reconfigurable logic may reduce the amount of redundant hardware required in space-based applications without sacrificing reliability. These concepts were studied using software modeling and simulation, and the results are presented in this report. Models of the commercially available, packet switched data interconnect SpaceWire protocol were developed and used to create network simulations of data networks containing reconfigurable logic with traffic flows for timing system distribution.

  17. Recreation of architectural structures using procedural modeling based on volumes

    Directory of Open Access Journals (Sweden)

    Santiago Barroso Juan

    2013-11-01

    Full Text Available While the procedural modeling of buildings and other architectural structures has evolved very significantly in recent years, there is noticeable absence of high-level tools that allow a designer, an artist or an historian, creating important buildings or architectonic structures in a particular city. In this paper we present a tool for creating buildings in a simple and clear, following rules that use the language and methodology of creating their own buildings, and hiding the user the algorithmic details of the creation of the model.

  18. Building information modeling in the architectural design phases

    DEFF Research Database (Denmark)

    Hermund, Anders

    The overall economical benefits of Building Information Modeling are generally comprehensible, but are there other problems with the implementation of BIM as a formulized system in a field that ultimately is dependant on a creative input? Is optimization and economic benefit really contributing...... with an architectural quality? In Denmark the implementation of the digital working methods related to BIM has been introduced by government law in 2007. Will the important role of the architect as designer change in accordance with these new methods, and does the idea of one big integrated model...... represent a paradox in relation to designing? The BIM mindset requires changes on many levels....

  19. Reservoir architecture modeling: Nonstationary models for quantitative geological characterization. Final report, April 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, D.; Epili, D.; Kelkar, M.; Redner, R.; Reynolds, A.

    1998-12-01

    The study was comprised of four investigations: facies architecture; seismic modeling and interpretation; Markov random field and Boolean models for geologic modeling of facies distribution; and estimation of geological architecture using the Bayesian/maximum entropy approach. This report discusses results from all four investigations. Investigations were performed using data from the E and F units of the Middle Frio Formation, Stratton Field, one of the major reservoir intervals in the Gulf Coast Basin.

  20. Building energy modeling for green architecture and intelligent dashboard applications

    Science.gov (United States)

    DeBlois, Justin

    Buildings are responsible for 40% of the carbon emissions in the United States. Energy efficiency in this sector is key to reducing overall greenhouse gas emissions. This work studied the passive technique called the roof solar chimney for reducing the cooling load in homes architecturally. Three models of the chimney were created: a zonal building energy model, computational fluid dynamics model, and numerical analytic model. The study estimated the error introduced to the building energy model (BEM) through key assumptions, and then used a sensitivity analysis to examine the impact on the model outputs. The conclusion was that the error in the building energy model is small enough to use it for building simulation reliably. Further studies simulated the roof solar chimney in a whole building, integrated into one side of the roof. Comparisons were made between high and low efficiency constructions, and three ventilation strategies. The results showed that in four US climates, the roof solar chimney results in significant cooling load energy savings of up to 90%. After developing this new method for the small scale representation of a passive architecture technique in BEM, the study expanded the scope to address a fundamental issue in modeling - the implementation of the uncertainty from and improvement of occupant behavior. This is believed to be one of the weakest links in both accurate modeling and proper, energy efficient building operation. A calibrated model of the Mascaro Center for Sustainable Innovation's LEED Gold, 3,400 m2 building was created. Then algorithms were developed for integration to the building's dashboard application that show the occupant the energy savings for a variety of behaviors in real time. An approach using neural networks to act on real-time building automation system data was found to be the most accurate and efficient way to predict the current energy savings for each scenario. A stochastic study examined the impact of the

  1. A Distributed, Cross-Agency Software Architecture for Sharing Climate Models and Observational Data Sets (Invited)

    Science.gov (United States)

    Crichton, D. J.; Mattmann, C. A.; Braverman, A. J.; Cinquini, L.

    2010-12-01

    The Jet Propulsion Laboratory (JPL) has been developing a distributed infrastructure to supporting access and sharing of Earth Science observational data sets with climate models to support model-to-data intercomparison for climate research. The Climate Data Exchange (CDX), a framework for linking distributed repositories coupled with tailored distributed services to support the intercomparison, provides mechanisms to discover, access, transform and share observational and model output data [2]. These services are critical to allowing data to remain distributed, but be pulled together to support analysis. The architecture itself provides a services-based approach allowing for integrating and working with other computing infrastructures through well-defined software interfaces. Specifically, JPL has worked very closely with the Earth System Grid (ESG) and the Program for Climate Model Diagnostics and Intercomparisons (PCMDI) at Lawrence Livermore National Laboratory (LLNL) to integrate NASA science data systems with the Earth System Grid to support federation across organizational and agency boundaries [1]. Of particular interest near-term is enabling access to NASA observational data along-side climate models for the Coupled Model Intercomparison Project known as CMIP5. CMIP5 is the protocol that will be used for the next International Panel for Climate Change (IPCC) Assessment Report (AR5) on climate change. JPL and NASA are currently engaged in a project to ensure that observational data are available to the climate research community through the Earth System Grid. By both developing a software architecture and working with the key architects for the ESG, JPL has been successful at building a prototype for AR5. This presentation will review the software architecture including core principles, models and interfaces, the Climate Data Exchange project and specific goals to support access to both observational data and models for AR5. It will highlight the progress

  2. MODELING AND SIMULATION OF PARALLEL PROCESSING ARCHITECTURE FOR IMAGE PROCESSING

    Directory of Open Access Journals (Sweden)

    K.MANJUNATHACHARI

    2007-01-01

    Full Text Available Typical real time computer vision tasks require huge amount of processing power and time for handling real time computer vision applications. The nature of processing in a typical computer vision algorithm usually ranges from many small arithmetic operations (Fine Grain Parallelism to symbolic operations (Coarse grain parallelism. The task become more complicate while considering image processing application due to large data sets and there processing. The existing processing system responds efficiently under sequential working and result in efficient output, but results in a slow operating system which results in a inefficient processing system under high speed image processing systems. Parallel processing founds to be the only solution to obtain the require processing speed for handling high-speed image processing applications. The existing image processing systems support usually only one suit of operations at once and fail to respond under multiple tasks. System taking single instruction or multiple instruction process operates using low level and high-level operations. Generally SIMD architecture is suitable under low level processing while MIMD architecture is suitable for high-level processing. This paper explores on modeling and simulation of parallel Image Processing architecture for Image Processing applications using Parallel Virtual Machine(PVM , MATLAB external interface API and C language on the Linux operating system platform.

  3. A Model-Driven Architecture Approach to the Efficient Identification of Services on Service-oriented Enterprise Architecture

    OpenAIRE

    Alahmari, Saad; De Roure, David; Zaluska, Ed

    2010-01-01

    Service-Oriented Enterprise Architecture requires the efficient development of loosely-coupled and interoperable sets of services. Existing design approaches do not always take full advantage of the value and importance of the engineering invested in existing legacy systems. This paper proposes an approach to define the key services from such legacy systems effectively. The approach focuses on identifying these services based on a Model-Driven Architecture approach supported by guidelines ove...

  4. Probabilistic logic modeling of network reliability for hybrid network architectures

    Energy Technology Data Exchange (ETDEWEB)

    Wyss, G.D.; Schriner, H.K.; Gaylor, T.R.

    1996-10-01

    Sandia National Laboratories has found that the reliability and failure modes of current-generation network technologies can be effectively modeled using fault tree-based probabilistic logic modeling (PLM) techniques. We have developed fault tree models that include various hierarchical networking technologies and classes of components interconnected in a wide variety of typical and atypical configurations. In this paper we discuss the types of results that can be obtained from PLMs and why these results are of great practical value to network designers and analysts. After providing some mathematical background, we describe the `plug-and-play` fault tree analysis methodology that we have developed for modeling connectivity and the provision of network services in several current- generation network architectures. Finally, we demonstrate the flexibility of the method by modeling the reliability of a hybrid example network that contains several interconnected ethernet, FDDI, and token ring segments. 11 refs., 3 figs., 1 tab.

  5. Multi-agent Architecture Model for Driving Mobile Manipulator Robots

    Directory of Open Access Journals (Sweden)

    A. Hentout

    2008-11-01

    Full Text Available In this article, we present generic hierarchical behavior-based architecture model for driving mobile manipulator robots. Two behaviors are of high-level. They constitute the Supervisory agent, which manages the global system. Two others are of intermediate-level and finally one behavior is of low-level. These last ones constitute the Mobile Robot agent and the Manipulator Robot agent controlling, respectively, the mobile base and the manipulator arm. The choice of the suggested model is justified by the generic character of the proposed agent model and by the possibility of integrating the whole in a distributed robotic system. The model is formalized in Agent UML from the conceptual level to the implementation level. The interaction between the various agents is modeled by the use of the interaction diagrams of Agent UML (states and protocol diagrams.

  6. Abstract Platform and Transformations for Model-Driven Service-Oriented Development

    OpenAIRE

    Andrade Almeida, J.P.; Ferreira Pires, L.; Sinderen, van, Marten

    2006-01-01

    In this paper, we discuss the use of abstract platforms and transformation for designing applications according to the principles of the service-oriented architecture. We illustrate our approach by discussing the use of the service discovery pattern at a platform-independent design level. We show how a trader service can be specified at a high-level of abstraction and incorporated in an abstract platform for service-oriented development. Designers can then build platform-independent models of...

  7. A Model-Driven approach for Collaborative Service-Oriented Architecture design

    OpenAIRE

    Touzi, Jihed; Benaben, Frederick; Pingaud, Hervé; Lorré, Jean-Pierre

    2010-01-01

    In a collaborative context, the integration of industrial partners deeply depends on the ability to use a collaborative architecture to interact efficiently. In this paper, we propose to tackle this point according to the fact that partners of the collaboration respect the SOA (Service-Oriented Architecture) paradigm. We propose to design such a collaborative architecture according to MDA (model-Driven Architecture) principles. We aim at using business models (the needs) to design a logical m...

  8. Architecture in motion: A model for music composition

    Science.gov (United States)

    Variego, Jorge Elias

    2011-12-01

    Speculations regarding the relationship between music and architecture go back to the very origins of these disciplines. Throughout history, these links have always reaffirmed that music and architecture are analogous art forms that only diverge in their object of study. In the 1 st c. BCE Vitruvius conceived Architecture as "one of the most inclusive and universal human activities" where the architect should be educated in all the arts, having a vast knowledge in history, music and philosophy. In the 18th c., the German thinker Johann Wolfgang von Goethe, described Architecture as "frozen music". More recently, in the 20th c., Iannis Xenakis studied the similar structuring principles between Music and Architecture creating his own "models" of musical composition based on mathematical principles and geometric constructions. The goal of this document is to propose a compositional method that will function as a translator between the acoustical properties of a room and music, to facilitate the creation of musical works that will not only happen within an enclosed space but will also intentionally interact with the space. Acoustical measurements of rooms such as reverberation time, frequency response and volume will be measured and systematically organized in correspondence with orchestrational parameters. The musical compositions created after the proposed model are evocative of the spaces on which they are based. They are meant to be performed in any space, not exclusively in the one where the acoustical measurements were obtained. The visual component of architectural design is disregarded; the room is considered a musical instrument, with its particular sound qualities and resonances. Compositions using the proposed model will not result as sonified shapes, they will be musical works literally "tuned" to a specific space. This Architecture in motion is an attempt to adopt scientific research to the service of a creative activity and to let the aural properties of

  9. Business Model Design and Architecture for the Internet of Everything

    Directory of Open Access Journals (Sweden)

    Dennis Pfisterer

    2016-04-01

    Full Text Available Smart devices and cyber-physical systems, which are interconnected to IT systems and services, form the basis for the arising Internet of Everything, opening up new economic opportunities for its participants and users beyond its technological aspects and challenges. While today’s e-business scenarios are mostly dominated by a few centralized online platforms, future business models, which will be feasible for the Internet of Everything, need to address special requirements. Such business models, e.g., leveraging the possibilities of smart cities, need to cope with arbitrary combinations of products and services orchestrated into complex products in a highly distributed and dynamic environment. Furthermore, these arbitrary combinations are influenced by real-time context information derived from sensor networks or IT systems, as well as the users’ requirements and preferences. The complexity of finding the optimal product/service combination overstrains users and leads to decisions according to the principle of adverse selection (i.e., choosing good enough instead of optimal. Such e-business models require an appropriate underlying value generation architecture that supports users in this process. In this paper, we develop a business model that addresses these problems. In addition, we present the Distributed Market Spaces (DMS software-system architecture as a possible implementation, which enables the aforementioned decentralized and context-centric e-business scenario and leverages the commercial possibilities of smart cities.

  10. A flexible architecture for modeling and simulation of diffusional association

    Directory of Open Access Journals (Sweden)

    Fiete Haack

    2010-02-01

    Full Text Available Up to now, it is not possible to obtain analytical solutions for complex molecular association processes (e.g. Molecule recognition in Signaling or catalysis. Instead Brownian Dynamics (BD simulations are commonly used to estimate the rate of diffusional association, e.g. to be later used in mesoscopic simulations. Meanwhile a portfolio of diffusional association (DA methods have been developed that exploit BD. However, DA methods do not clearly distinguish between modeling, simulation, and experiment settings. This hampers to classify and compare the existing methods with respect to, for instance model assumptions, simulation approximations or specific optimization strategies for steering the computation of trajectories. To address this deficiency we propose FADA (Flexible Architecture for Diffusional Association - an architecture that allows the flexible definition of the experiment comprising a formal description of the model in SpacePi, different simulators, as well as validation and analysis methods. Based on the NAM (Northrup-Allison-McCammon method, which forms the basis of many existing DA methods, we illustrate the structure and functioning of FADA. A discussion of future validation experiments illuminates how the FADA can be exploited in order to estimate reaction rates and how validation techniques may be applied to validate additional features of the model.

  11. Architecture for Integrated Medical Model Dynamic Probabilistic Risk Assessment

    Science.gov (United States)

    Jaworske, D. A.; Myers, J. G.; Goodenow, D.; Young, M.; Arellano, J. D.

    2016-01-01

    Probabilistic Risk Assessment (PRA) is a modeling tool used to predict potential outcomes of a complex system based on a statistical understanding of many initiating events. Utilizing a Monte Carlo method, thousands of instances of the model are considered and outcomes are collected. PRA is considered static, utilizing probabilities alone to calculate outcomes. Dynamic Probabilistic Risk Assessment (dPRA) is an advanced concept where modeling predicts the outcomes of a complex system based not only on the probabilities of many initiating events, but also on a progression of dependencies brought about by progressing down a time line. Events are placed in a single time line, adding each event to a queue, as managed by a planner. Progression down the time line is guided by rules, as managed by a scheduler. The recently developed Integrated Medical Model (IMM) summarizes astronaut health as governed by the probabilities of medical events and mitigation strategies. Managing the software architecture process provides a systematic means of creating, documenting, and communicating a software design early in the development process. The software architecture process begins with establishing requirements and the design is then derived from the requirements.

  12. Methodology of modeling and measuring computer architectures for plasma simulations

    Science.gov (United States)

    Wang, L. P. T.

    1977-01-01

    A brief introduction to plasma simulation using computers and the difficulties on currently available computers is given. Through the use of an analyzing and measuring methodology - SARA, the control flow and data flow of a particle simulation model REM2-1/2D are exemplified. After recursive refinements the total execution time may be greatly shortened and a fully parallel data flow can be obtained. From this data flow, a matched computer architecture or organization could be configured to achieve the computation bound of an application problem. A sequential type simulation model, an array/pipeline type simulation model, and a fully parallel simulation model of a code REM2-1/2D are proposed and analyzed. This methodology can be applied to other application problems which have implicitly parallel nature.

  13. An approach for modelling architectural design rules in UML and its application to embedded software

    OpenAIRE

    Mattsson, Anders; Fitzgerald, Brian; Lundell, Bjorn; Lings, Brian

    2012-01-01

    peer-reviewed Current techniques for modelling software architecture do not provide sufficient support for modelling of architectural design rules. This is a problem in the context of Model-Driven Development in which it is assumed that major design artefacts are represented as formal or semi-formal models. This paper addresses this problem by presenting an approach to modelling architectural design rules in UML at the abstraction level of the meaning of the rules. The high abstraction lev...

  14. Modern multicore and manycore architectures: Modelling, optimisation and benchmarking a multiblock CFD code

    Science.gov (United States)

    Hadade, Ioan; di Mare, Luca

    2016-08-01

    Modern multicore and manycore processors exhibit multiple levels of parallelism through a wide range of architectural features such as SIMD for data parallel execution or threads for core parallelism. The exploitation of multi-level parallelism is therefore crucial for achieving superior performance on current and future processors. This paper presents the performance tuning of a multiblock CFD solver on Intel SandyBridge and Haswell multicore CPUs and the Intel Xeon Phi Knights Corner coprocessor. Code optimisations have been applied on two computational kernels exhibiting different computational patterns: the update of flow variables and the evaluation of the Roe numerical fluxes. We discuss at great length the code transformations required for achieving efficient SIMD computations for both kernels across the selected devices including SIMD shuffles and transpositions for flux stencil computations and global memory transformations. Core parallelism is expressed through threading based on a number of domain decomposition techniques together with optimisations pertaining to alleviating NUMA effects found in multi-socket compute nodes. Results are correlated with the Roofline performance model in order to assert their efficiency for each distinct architecture. We report significant speedups for single thread execution across both kernels: 2-5X on the multicore CPUs and 14-23X on the Xeon Phi coprocessor. Computations at full node and chip concurrency deliver a factor of three speedup on the multicore processors and up to 24X on the Xeon Phi manycore coprocessor.

  15. F-Alloy: An Alloy Based Model Transformation Language

    OpenAIRE

    Gammaitoni, Loïc; Kelsen, Pierre

    2015-01-01

    Model transformations are one of the core artifacts of a model-driven engineering approach. The relational logic language Alloy has been used in the past to verify properties of model transformations. In this paper we introduce the concept of functional Alloy modules. In essence a functional Alloy module can be viewed as an Alloy module representing a model transformation. We describe a sublanguage of Alloy called F-Alloy that allows the specification of functional Alloy modules. Module...

  16. Model for supporting awareness in the CSCL ALLEGRO environment through a blackboard architecture

    Directory of Open Access Journals (Sweden)

    Demetrio Arturo Ovalle Carranza

    2010-04-01

    Full Text Available This paper is aimed at describing collaborative activities, the awareness process and blackboard architecture used within the ALLEGRO system, a multi-agent learning and teaching environment which has included artificial intelligence mechanisms (instructional planning (IP, cased-based reasoning (CBR, multi-agent systems (MAS, intelligent tutoring systems (ITS and computer supported collaborative learning (CSCL. The proposed model of awareness promotes communication, collaboration and coordination in CSCL ALLEGRO. MAS-CommonKADS methodology was applied for building the Multi-Agent system. ALLEGRO based its instructional approach on the following three pedagogical paradigms: conductive behaviour, cognitive mechanisms (distributed cognition and problem-based learning and social-historical theory. The system was validated via several case studies regarding the graphical digital domain for postgraduate architectural studies. The proposed awareness model lets students develop important skills such as conscious behaviour, communication, collaboration and coordination in the CSCL component of the ALLEGRO system. This model facilitates students acquiring a perception of what others are doing inside the CSCL, thereby using such knowledge for interacting with the environment and developing leading to expressing and exchanging ideas and opinions with other students, transforming the class into an open virtual forum for reflection, proactive interaction and a critical space for exchanging ideas. The proposed instructional model is a valuable resource from the technological and pedagogical point of view as different theories are integrated, some of them conflicting with others.

  17. Generic Model of an Enterprise Information Architecture for a Public Institution

    OpenAIRE

    Ghisoiu, Nicolae; FAUR Gheorghe; Bologa, Cristian

    2010-01-01

    on Information Architecture, part of theEnterprise Architecture, by revealing the way dataare organized within an enterprise, as well as the waythey are manipulated in order to obtain efficientinformation out of the data stored in enterpriseinformation systems.In this way, we intend to support enterprisearchitects that work in public institutions atdesigning Information Architectures for thatenterprise by defining a generic model of enterpriseinformation architecture for a public institution....

  18. OPEN ARCHITECTURE PLATFORMS FOR THE CONTROL OF ROBOTIC SYSTEMS AND A PROPOSED REFERENCE ARCHITECTURE MODEL

    OpenAIRE

    Ferenc, Goran; Dimić, Zoran; Lutovac, Maja; Vidaković, Jelena; Kvrgić, Vladimir

    2013-01-01

    This paper presents advantages of using open architecture for the real-time control of robot manipulators, parallel kinematics machine tools and other multi-axis machining systems. In order to increase their competitiveness, companies need to follow the global economy requirements. The constant incorporation of new technologies into existing controllers and reduction in the development time and costs are the main objectives. An open architecture control (OAC) concept appears as a solution to ...

  19. High level architecture evolved modular federation object model

    CERN Document Server

    Wang, Wenguang; Chen, Xin; Li, Qun; Wang, Weiping

    2009-01-01

    To improve the agility, dynamics, composability, reusability, and development efficiency restricted by monolithic Federation Object Model (FOM), a modular FOM was proposed by High Level Architecture (HLA) Evolved product development group. This paper reviews the state-of-the-art of HLA Evolved modular FOM. In particular, related concepts, the overall impact on HLA standards, extension principles, and merging processes are discussed. Also permitted and restricted combinations, and merging rules are provided, and the influence on HLA interface specification is given. The comparison between modular FOM and Base Object Model (BOM) is performed to illustrate the importance of their combination. The applications of modular FOM are summarized. Finally, the significance to facilitate composable simulation both in academia and practice is presented and future directions are pointed out.

  20. ARCHITECTURES AND ALGORITHMS FOR COGNITIVE NETWORKS ENABLED BY QUALITATIVE MODELS

    DEFF Research Database (Denmark)

    Balamuralidhar, P.

    2013-01-01

    traditional limitations and potentially achieving better performance. The vision is that, networks should be able to monitor themselves, reason upon changes in self and environment, act towards the achievement of specific goals and learn from experience. The concept of a Cognitive Engine (CE) supporting...... cognitive functions, as part of network elements, enabling above said autonomic capabilities is gathering attention. Awareness of the self and the world is an important aspect of the cognitive engine to be autonomic. This is achieved through embedding their models in the engine, but the complexity and...... cognitive engine that incorporates a context space based information structure to its knowledge model. I propose a set of guiding principles behind a cognitive system to be autonomic and use them with additional requirements to build a detailed architecture for the cognitive engine. I define a context space...

  1. 3D model tools for architecture and archaeology reconstruction

    Science.gov (United States)

    Vlad, Ioan; Herban, Ioan Sorin; Stoian, Mircea; Vilceanu, Clara-Beatrice

    2016-06-01

    The main objective of architectural and patrimonial survey is to provide a precise documentation of the status quo of the surveyed objects (monuments, buildings, archaeological object and sites) for preservation and protection, for scientific studies and restoration purposes, for the presentation to the general public. Cultural heritage documentation includes an interdisciplinary approach having as purpose an overall understanding of the object itself and an integration of the information which characterize it. The accuracy and the precision of the model are directly influenced by the quality of the measurements realized on field and by the quality of the software. The software is in the process of continuous development, which brings many improvements. On the other side, compared to aerial photogrammetry, close range photogrammetry and particularly architectural photogrammetry is not limited to vertical photographs with special cameras. The methodology of terrestrial photogrammetry has changed significantly and various photographic acquisitions are widely in use. In this context, the present paper brings forward a comparative study of TLS (Terrestrial Laser Scanner) and digital photogrammetry for 3D modeling. The authors take into account the accuracy of the 3D models obtained, the overall costs involved for each technology and method and the 4th dimension - time. The paper proves its applicability as photogrammetric technologies are nowadays used at a large scale for obtaining the 3D model of cultural heritage objects, efficacious in their assessment and monitoring, thus contributing to historic conservation. Its importance also lies in highlighting the advantages and disadvantages of each method used - very important issue for both the industrial and scientific segment when facing decisions such as in which technology to invest more research and funds.

  2. Architectures drawn / digital models: the Venices (impossible on line

    Directory of Open Access Journals (Sweden)

    Malvina Borgherini

    2011-12-01

    Full Text Available A contemporary city representation talks not only about architecture and landscape but also about the effects that political institutions, cultural traditions and economic enterprises have on the urban community. Methods and ways traditionally used to present the complexity and, at the same time, the personality of a town, or on a smaller scale of one of his monument, are not suitable with the contemporary reality. A very famous panel presented at Venice Biennale in 1976, Aldo Rossi’s «Città Analoga», within real and ideal architectures, ancient monuments and contemporary landscapes, individual and collective memories, human presences and empty spaces, can be taken as an example for the preparation of a new ‘story’ or a new ‘map’ for a city like Venice. The space of a digital model can become a place for discussion and analysis, a place where to see together historical records and projects never realized, where to put subjective and objective visions, which overlap daily and occasional tracks.

  3. Optimization of Forward Wave Modeling on Contemporary HPC Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, Jens [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Micikevicius, Paulius [NVIDIA, Santa Clara, CA (United States); Williams, Samuel [Fraunhofer ITWM, Kaiserslautern (Germany)

    2012-07-20

    Reverse Time Migration (RTM) is one of the main approaches in the seismic processing industry for imaging the subsurface structure of the Earth. While RTM provides qualitative advantages over its predecessors, it has a high computational cost warranting implementation on HPC architectures. We focus on three progressively more complex kernels extracted from RTM: for isotropic (ISO), vertical transverse isotropic (VTI) and tilted transverse isotropic (TTI) media. In this work, we examine performance optimization of forward wave modeling, which describes the computational kernels used in RTM, on emerging multi- and manycore processors and introduce a novel common subexpression elimination optimization for TTI kernels. We compare attained performance and energy efficiency in both the single-node and distributed memory environments in order to satisfy industry’s demands for fidelity, performance, and energy efficiency. Moreover, we discuss the interplay between architecture (chip and system) and optimizations (both on-node computation) highlighting the importance of NUMA-aware approaches to MPI communication. Ultimately, our results show we can improve CPU energy efficiency by more than 10× on Magny Cours nodes while acceleration via multiple GPUs can surpass the energy-efficient Intel Sandy Bridge by as much as 3.6×.

  4. ARPENTEUR: a web-based photogrammetry tool for architectural modeling

    Science.gov (United States)

    Grussenmeyer, Pierre; Drap, Pierre

    2000-12-01

    ARPENTEUR is a web application for digital photogrammetry mainly dedicated to architecture. ARPENTEUR has been developed since 1998 by two French research teams: the 'Photogrammetry and Geomatics' group of ENSAIS-LERGEC's laboratory and the MAP-gamsau CNRS laboratory located in the school of Architecture of Marseille. The software package is a web based tool since photogrammetric concepts are embedded in Web technology and Java programming language. The aim of this project is to propose a photogrammetric software package and 3D modeling methods available on the Internet as applets through a simple browser. The use of Java and the Web platform is ful of advantages. Distributing software on any platform, at any pace connected to Internet is of course very promising. The updating is done directly on the server and the user always works with the latest release installed on the server. Three years ago the first prototype of ARPENTEUR was based on the Java Development Kit at the time only available for some browsers. Nowadays, we are working with the JDK 1.3 plug-in enriched by Java Advancing Imaging library.

  5. Modelling Spiking Neural Network from the Architecture Evaluation Perspective

    Institute of Scientific and Technical Information of China (English)

    Yu Ji; You-Hui Zhang; Wei-Min Zheng

    2016-01-01

    The brain-inspired spiking neural network (SNN) computing paradigm offers the potential for low-power and scalable computing, suited to many intelligent tasks that conventional computational systems find difficult. On the other hand, NoC (network-on-chips) based very large scale integration (VLSI) systems have been widely used to mimic neuro-biological architectures (including SNNs). This paper proposes an evaluation methodology for SNN applications from the aspect of micro-architecture. First, we extract accurate SNN models from existing simulators of neural systems. Second, a cycle-accurate NoC simulator is implemented to execute the aforementioned SNN applications to get timing and energy-consumption information. We believe this method not only benefits the exploration of NoC design space but also bridges the gap between applications (especially those from the neuroscientists’ community) and neuromorphic hardware. Based on the method, we have evaluated some typical SNNs in terms of timing and energy. The method is valuable for the development of neuromorphic hardware and applications.

  6. SARC Model for Three-Dimensional Coordinate Transformation

    Institute of Scientific and Technical Information of China (English)

    YAO Jili; WANG Shuguang; SUN Yating

    2006-01-01

    In this paper, a transformation model named SARC(static-filter adjustment with restricted condition) is presented, which is more practical and more rigorous in theory and fitting any angle of rotation parameter. The transformation procedure is divided into 4 steps: ① the original and object coordinates can be regarded as observations with errors; ② rigorous formula is firstly deduced in order to compute the first approximation of the transformation parameters by use of four common points and the transformation equation is linearized; ③ calculate the most probable values and variances of the seven transformation parameters by SARC model; ④ to demonstrate validity of SARC , an example is given.

  7. Development and verification of printed circuit board toroidal transformer model

    DEFF Research Database (Denmark)

    Pejtersen, Jens; Mønster, Jakob Døllner; Knott, Arnold

    2013-01-01

    comparing calculated parameters with 3D finite element simulations and experimental measurement results. The developed transformer model shows good agreement with the simulated and measured results. The model can be used to predict the parameters of printed circuit board toroidal transformer configurations......An analytical model of an air core printed circuit board embedded toroidal transformer configuration is presented. The transformer has been developed for galvanic isolation of very high frequency switch-mode dc-dc power converter applications. The theoretical model is developed and verified by...

  8. Development and verification of printed circuit board toroidal transformer model

    DEFF Research Database (Denmark)

    Pejtersen, Jens; Mønster, Jakob Døllner; Knott, Arnold

    comparing calculated parameters with 3D finite element simulations and experimental measurement results. The developed transformer model shows good agreement with the simulated and measured results. The model can be used to predict the parameters of printed circuit board toroidal transformer configurations......An analytical model of an air core printed circuit board embedded toroidal transformer configuration is presented. The transformer has been developed for galvanic isolation of very high frequency switch-mode dc-dc power converter applications. The theoretical model is developed and verified by...

  9. Towards a Transformation Model of a Pedagogy Collaborative Project (PCP Scenario

    Directory of Open Access Journals (Sweden)

    Maroua AULAD BEN TAHAR

    2014-11-01

    Full Text Available In this paper, we propose a meta-model for Pedagogy Collaborative Project (PCP allows the teacher to develop a PCP scenario. The latter is able to be applied into a PCP scenario for a training platform that is not a priori designed for this teaching method. We describe an MDA (Model Driven Architecture approach to develop transformation rules between the meta-model and the PCP training platform. To illustrate this proposal, the Moodle platform is chosen as a case study.

  10. A transformation approach to modelling multi-modal diffusions

    DEFF Research Database (Denmark)

    Forman, Julie Lyng; Sørensen, Michael

    2014-01-01

    This paper demonstrates that flexible and statistically tractable multi-modal diffusion models can be attained by transformation of simple well-known diffusion models such as the Ornstein–Uhlenbeck model, or more generally a Pearson diffusion. The transformed diffusion inherits many properties of...

  11. Two-Dimensional Discrete Wavelet Transform on Large Images for Hybrid Computing Architectures: GPU and CELL

    OpenAIRE

    Alexander, Michael; D’Ambra, Pasqua; Belloum, Adam; Bosilca, George; Cannataro, Mario; Danelutto, Marco; Martino, Beniamino; Gerndt, Michael; Jeannot, Emmanuel; Namyst, Raymond; Roman, Jean; Scott, Stephen L.; Traff, Jesper Larsson; Vallée, Geoffroy; Weidendorfer, Josef

    2012-01-01

    The Discrete Wavelet Transform (DWT) has gained the momentum in signal processing and image compression over the last decade bringing the concept up to the level of new image coding standard JPEG2000. Thanks to many added values in DWT, in particular inherent multi-resolution nature, wavelet-coding schemes are suitable for various applications where scalability and tolerable degradation are rel- evant. Moreover, as we demonstrate in this paper, it can be used as a perfect benchmarking procedu...

  12. Java Architecture for Detect and Avoid Extensibility and Modeling

    Science.gov (United States)

    Santiago, Confesor; Mueller, Eric Richard; Johnson, Marcus A.; Abramson, Michael; Snow, James William

    2015-01-01

    Unmanned aircraft will equip with a detect-and-avoid (DAA) system that enables them to comply with the requirement to "see and avoid" other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. This paper describes a capability called Java Architecture for Detect and Avoid Extensibility and Modeling (JADEM), developed to prototype and help evaluate various DAA technological requirements by providing a flexible and extensible software platform that models all major detect-and-avoid functions. Figure 1 illustrates JADEM's architecture. The surveillance module can be actual equipment on the unmanned aircraft or simulators that model the process by which sensors on-board detect other aircraft and provide track data to the traffic display. The track evaluation function evaluates each detected aircraft and decides whether to provide an alert to the pilot and its severity. Guidance is a combination of intruder track information, alerting, and avoidance/advisory algorithms behind the tools shown on the traffic display to aid the pilot in determining a maneuver to avoid a loss of well clear. All these functions are designed with a common interface and configurable implementation, which is critical in exploring DAA requirements. To date, JADEM has been utilized in three computer simulations of the National Airspace System, three pilot-in-the-loop experiments using a total of 37 professional UAS pilots, and two flight tests using NASA's Predator-B unmanned aircraft, named Ikhana. The data collected has directly informed the quantitative separation standard for "well clear", safety case, requirements development, and the operational environment for the DAA minimum operational performance standards. This work was performed by the Separation Assurance/Sense and Avoid Interoperability team under NASA's UAS Integration in the NAS project.

  13. An ontological model of the practice transformation process.

    Science.gov (United States)

    Sen, Arun; Sinha, Atish P

    2016-06-01

    Patient-centered medical home is defined as an approach for providing comprehensive primary care that facilitates partnerships between individual patients and their personal providers. The current state of the practice transformation process is ad hoc and no methodological basis exists for transforming a practice into a patient-centered medical home. Practices and hospitals somehow accomplish the transformation and send the transformation information to a certification agency, such as the National Committee for Quality Assurance, completely ignoring the development and maintenance of the processes that keep the medical home concept alive. Many recent studies point out that such a transformation is hard as it requires an ambitious whole-practice reengineering and redesign. As a result, the practices suffer change fatigue in getting the transformation done. In this paper, we focus on the complexities of the practice transformation process and present a robust ontological model for practice transformation. The objective of the model is to create an understanding of the practice transformation process in terms of key process areas and their activities. We describe how our ontology captures the knowledge of the practice transformation process, elicited from domain experts, and also discuss how, in the future, that knowledge could be diffused across stakeholders in a healthcare organization. Our research is the first effort in practice transformation process modeling. To build an ontological model for practice transformation, we adopt the Methontology approach. Based on the literature, we first identify the key process areas essential for a practice transformation process to achieve certification status. Next, we develop the practice transformation ontology by creating key activities and precedence relationships among the key process areas using process maturity concepts. At each step, we employ a panel of domain experts to verify the intermediate representations of the

  14. A User Profile Based Access Control Model and Architecture

    Directory of Open Access Journals (Sweden)

    Meriem Zerkouk

    2013-02-01

    Full Text Available Personalization and adaptation to the user profile capability are the hottest issues to ensure ambientassisted living and context awareness in nowadays environments. With the growing healthcare andwellbeing context aware applications, modeling security policies becomes an important issue in thedesign of future access control models. This requires rich semantics using ontology modeling for themanagement of services provided to dependant people. However, current access control models remainunsuitable due to lack of personalization, adaptability and smartness to the handicap situation.In this paper, we propose a novel adaptable access control model and its related architecture in whichthe security policy is based on the handicap situation analyzed from the monitoring of user’s behavior inorder to grant a service using any assistive device within intelligent environment. The design of ourmodel is an ontology-learning and evolving security policy for predicting the future actions of dependentpeople. This is reached by reasoning about historical data, contextual data and user behavior accordingto the access rules that are used in the inference engine to provide the right service according to theuser’s needs.

  15. Automatic Texture Mapping of Architectural and Archaeological 3d Models

    Science.gov (United States)

    Kersten, T. P.; Stallmann, D.

    2012-07-01

    Today, detailed, complete and exact 3D models with photo-realistic textures are increasingly demanded for numerous applications in architecture and archaeology. Manual texture mapping of 3D models by digital photographs with software packages, such as Maxon Cinema 4D, Autodesk 3Ds Max or Maya, still requires a complex and time-consuming workflow. So, procedures for automatic texture mapping of 3D models are in demand. In this paper two automatic procedures are presented. The first procedure generates 3D surface models with textures by web services, while the second procedure textures already existing 3D models with the software tmapper. The program tmapper is based on the Multi Layer 3D image (ML3DImage) algorithm and developed in the programming language C++. The studies showing that the visibility analysis using the ML3DImage algorithm is not sufficient to obtain acceptable results of automatic texture mapping. To overcome the visibility problem the Point Cloud Painter algorithm in combination with the Z-buffer-procedure will be applied in the future.

  16. UML MODELING AND SYSTEM ARCHITECTURE FOR AGENT BASED INFORMATION RETRIEVAL

    Directory of Open Access Journals (Sweden)

    D. Muhammad Noorul Mubarak

    2015-12-01

    Full Text Available In this current technological era, there is an enormous increase in the information available on web and also in the online databases. This information abundance increases the complexity of finding relevant information. To solve such challenges, there is a need for improved and intelligent systems for efficient search and retrieval. Intelligent Agents can be used for better search and information retrieval in a document collection. The information required by a user is scattered in a large number of databases. In this paper, the object oriented modeling for agent based information retrieval system is presented. The paper also discusses the framework of agent architecture for obtaining the best combination terms that serve as an input query to the information retrieval system. The communication and cooperation among the agents are also explained. Each agent has a task to perform in information retrieval.

  17. Mosque as a Model of Learning Principles of Sustainable Architecture

    Directory of Open Access Journals (Sweden)

    Swambodo Murdariatmo Adi

    2016-06-01

    Full Text Available The mosque is an integral part of the circuit-worship rituals of Islam. For Muslims in Indonesia, the role of the mosque as a place of worship, examines religion and some other activities occupy a strategic position not only as a religious symbol but more emphasis on the function of the space as a public building. Utilization of space in public buildings as well as space-ritual-social space will have meaning for the people in view of adaptation space used. Awareness of the importance of effective space utilization and management of water resources wisely in support of the ritual apply the principles of sustainable architecture will have a positive impact for the people to give directions as to how the principle of austerity-not wasteful in Islam can be applied. This paper will discuss about the process of continuous learning from the essence of understanding of the mosque as a model in implementing the process of life, taking into account the principles of simplicity, functional and wisdom, especially in the efficiency of utilization of local resources. The method used in this research is qualitative descriptive, which is explained the theory and based on literature and accompanied by case study that have implemented the principles. The output of this application of the principles of sustainable architecture in the planning and use of mosques as a place in the relationship with God and with fellow human relations can be a model for the faithful to deal with wisely challenge natural resource constraints, especially for future generations.

  18. A Model for Information Integration Using Service Oriented Architectur

    Directory of Open Access Journals (Sweden)

    C. Punitha Devi

    2014-06-01

    Full Text Available Business agility remains to be the keyword that drives the business into different directions and enabling a 360 degree shift in the business process. To achieve agility the organization should work on real time information and data. The need to have instant access to information appears to be ever shine requirement of all organizations or enterprise. Access to information does not come directly with a single query but a complex process termed Information integration. Information integration has been in existence for the past two decades and has been progressive up to now. The challenges and issues keep on persisting as information integration problem evolves by itself. This paper addresses the issues in the approaches, techniques and models pertaining to information integration and identifies the problem for a need for a complete model. As SOA is the architectural style that is changing the business patterns today, this paper proposes a service oriented model for information integration. The model mainly focuses on giving a complete structure for information integration that is adaptable to any environment and open in nature. Here information is converted into service and then the information services are integrated through service oriented integration to provide the integrated information also as service.

  19. Transformer Model in Wide Frequency Bandwidth for Power Electronics Systems

    Directory of Open Access Journals (Sweden)

    Carlos Gonzalez-Garcia

    2013-01-01

    Full Text Available The development of the smart grids leads to new challenges on the power electronics equipment and power transformers. The use of power electronic transformer presents several advantages, but new problems related with the application of high frequency voltage and current components come across. Thus, an accurate knowledge of the transformer behavior in a wide frequency range is mandatory. A novel modeling procedure to relate the transformer physical behavior and its frequency response by means of electrical parameters is presented. Its usability is demonstrated by an example where a power transformer is used as filter and voltage reducer in an AC-DC-AC converter.

  20. A discrete dislocation–transformation model for austenitic single crystals

    International Nuclear Information System (INIS)

    A discrete model for analyzing the interaction between plastic flow and martensitic phase transformations is developed. The model is intended for simulating the microstructure evolution in a single crystal of austenite that transforms non-homogeneously into martensite. The plastic flow in the untransformed austenite is simulated using a plane-strain discrete dislocation model. The phase transformation is modeled via the nucleation and growth of discrete martensitic regions embedded in the austenitic single crystal. At each instant during loading, the coupled elasto-plasto-transformation problem is solved using the superposition of analytical solutions for the discrete dislocations and discrete transformation regions embedded in an infinite homogeneous medium and the numerical solution of a complementary problem used to enforce the actual boundary conditions and the heterogeneities in the medium. In order to describe the nucleation and growth of martensitic regions, a nucleation criterion and a kinetic law suitable for discrete regions are specified. The constitutive rules used in discrete dislocation simulations are supplemented with additional evolution rules to account for the phase transformation. To illustrate the basic features of the model, simulations of specimens under plane-strain uniaxial extension and contraction are analyzed. The simulations indicate that plastic flow reduces the average stress at which transformation begins, but it also reduces the transformation rate when compared with benchmark simulations without plasticity. Furthermore, due to local stress fluctuations caused by dislocations, martensitic systems can be activated even though transformation would not appear to be favorable based on the average stress. Conversely, the simulations indicate that the plastic hardening behavior is influenced by the reduction in the effective austenitic grain size due to the evolution of transformation. During cyclic simulations, the coupled plasticity-transformation

  1. idSpace D2.2 – Semantic meta-model, integration and transformations v1

    DEFF Research Database (Denmark)

    Dolog, Peter; Lin, Yujian; Dols, Roger;

    2009-01-01

    This report introduces a topic maps based meta-model for creativity techniques, creativity process, and idea maps as results from creativity process. It proposes a graph based and hierarchical graph based transformation of idea maps for combination and integration of results of different creativi...... sessions. It further suggests a service composition model as an integration model based on service oriented architecture which integrates various creativity process supporting tools as services....

  2. Enterprise Architecture Model that Enables to Search for Patterns of Statistical Information

    OpenAIRE

    Oleg Chertov

    2013-01-01

    Enterprise architecture is the stem from which developing of any departmental information system should grow and around which it should revolve. In the paper, a fragment of an enterprise architecture model is built using ArchiMate language. This fragment enables to search for information in enterprises which do not work in productive industry. Such enterprises include official statistics. The proposed model embraces all three architectural levels of corresponding information systems, namely, ...

  3. Exploring business model innovation in professional service firms: Insights from architecture

    OpenAIRE

    Lieftink, B.; Bos-De Vos, M.; Lauche, K.; Smits, A

    2014-01-01

    Business model innovation may be a significant source of competitive advantage and firm performance. New ways of doing business have become increasingly important in the professional service sector. This research specifically focuses on business model innovation by architecture firms, which are suffering from the current financial crisis and changes in the architecture, engineering and construction industry. Architecture firms need to innovate not only their services, but also make more funda...

  4. Developing a scalable modeling architecture for studying survivability technologies

    Science.gov (United States)

    Mohammad, Syed; Bounker, Paul; Mason, James; Brister, Jason; Shady, Dan; Tucker, David

    2006-05-01

    To facilitate interoperability of models in a scalable environment, and provide a relevant virtual environment in which Survivability technologies can be evaluated, the US Army Research Development and Engineering Command (RDECOM) Modeling Architecture for Technology Research and Experimentation (MATREX) Science and Technology Objective (STO) program has initiated the Survivability Thread which will seek to address some of the many technical and programmatic challenges associated with the effort. In coordination with different Thread customers, such as the Survivability branches of various Army labs, a collaborative group has been formed to define the requirements for the simulation environment that would in turn provide them a value-added tool for assessing models and gauge system-level performance relevant to Future Combat Systems (FCS) and the Survivability requirements of other burgeoning programs. An initial set of customer requirements has been generated in coordination with the RDECOM Survivability IPT lead, through the Survivability Technology Area at RDECOM Tank-automotive Research Development and Engineering Center (TARDEC, Warren, MI). The results of this project are aimed at a culminating experiment and demonstration scheduled for September, 2006, which will include a multitude of components from within RDECOM and provide the framework for future experiments to support Survivability research. This paper details the components with which the MATREX Survivability Thread was created and executed, and provides insight into the capabilities currently demanded by the Survivability faculty within RDECOM.

  5. Active Versus Passive: Receiver Model Transforms for Diffusive Molecular Communication

    CERN Document Server

    Noel, Adam; Makrakis, Dimitrios; Hafid, Abdelhakim

    2016-01-01

    This paper presents an analytical comparison of the active and passive receiver models in diffusive molecular communication. In the active model, molecules are absorbed when they collide with the receiver surface. In the passive model, the receiver is a virtual boundary that does not affect molecule behavior. Two approaches are presented to derive transforms between the active and passive receiver signals. As an example, we unify the two models for an unbounded diffusion-only molecular communication system with a spherical receiver. As time increases in the three-dimensional system, the transform functions have constant scaling factors, such that the receiver models are effectively equivalent. Methods are presented to enable the transformation of stochastic simulations, which are used to verify the transforms and demonstrate that transforming the simulation of a passive receiver can be more efficient and more accurate than the direct simulation of an absorbing receiver.

  6. A Survey of Enterprise Architecture Analysis Using Multi Criteria Decision Making Models (MCDM)

    Science.gov (United States)

    Zia, Mehmooda Jabeen; Azam, Farooque; Allauddin, Maria

    System design becomes really important for software production due to continuous increase in size and complexity of software systems. It is a complex design activity to build architecture for the systems like large enterprises. Thus it is a critical issue to select the correct architecture in software engineering domain. Moreover, in enterprise architecture selection different goals and objectives must be taken into consideration as it is a multi-criteria decision making problem. Generally this field of enterprise architecture analysis has progressed from the application of linear weighting, through integer programming and linear programming to multi-criteria decision making (MCDM) models. In this paper we survey two multi-criteria decision making models (AHP, ANP) to determine that to what extent they have been used in making powerful decisions in complex enterprise architecture analysis. We have found that by using ANP model, decision makers of an enterprise can make more precise and suitable decisions in selection of enterprise architecture styles.

  7. An architecture for life-long user modelling

    OpenAIRE

    Elliott, D.; Hopfgartner, F.; Leelanupab, T.; Moshfeghi, Y.; Jose, J.M.

    2009-01-01

    In this paper, we propose a united architecture for the creation of life-long user profiles. Our architecture combines different steps required for a user prole, including feature extraction and representation, reasoning, recommendation and presentation. We discuss various issues that arise in the context of life-long profiling.

  8. Study of hierarchical federation architecture using multi-resolution modeling

    Institute of Scientific and Technical Information of China (English)

    HAO Yan-ling; SHEN Dong-hui; QIAN Hua-ming; DENG Ming-hui

    2004-01-01

    This paper aims at finding a solution to the problem aroused in complex system simulation, where a specific functional federation is coupled with other simulation systems. In other words, the communication information within the system may be received by other federates that participated in this united simulation. For the purpose of ensuring simulation system unitary character, a hierarchical federation architecture (HFA) is taken. Also considering the real situation, where federates in a complicated simulation system can be made simpler to an extent, a multi-resolution modeling (MRM) method is imported to implement the design of hierarchical federation. By utilizing the multiple resolution entity (MRE) modeling approach, MRE for federates are designed out. When different level training simulation is required, the appropriate MRE at corresponding layers can be called. The design method realizes the reuse feature of the simulation system and reduces simulation complexity and improves the validity of system Simulation Cost (SC). Taking submarine voyage training simulator (SVTS) for instance, a HFA for submarine is constructed inthis paper, which approves the feasibility of studied approach.

  9. Scheduling Model for Symmetric Multiprocessing Architecture Based on Process Behavior

    Directory of Open Access Journals (Sweden)

    Ali Mousa Alrahahleh

    2012-07-01

    Full Text Available This paper presents a new method for scheduling of symmetric multiprocessing (SMP architecture based on process behavior. The method takes advantage of process behavior, which includes system calls to create groups of similar processes using machine-learning techniques like clustering or classification, and then makes process distribution decisions based on classification or clustering groups. The new method is divided into three stages: the first phase is collecting data about process and defining subset of data is to be used in further processing. The second phase is using data collected in classification or clustering to create classification/clustering models by applying common techniques similar to those used in machine learning, such as a decision tree for classification or EM for clustering. System training classification should be done in this phase, and after that, classification or clustering models should be applied on a running system to find out in which group each process belongs. The third phase is using process groups as a parameter of scheduling on SMP (sympatric Multi Processor systems when doing distribution over multi-processor cores. Another advantage can be achieved by letting the end user train the system to classify a specific type of process and assign it to a specific process core, targeting real-time response or performance gain. The new method increases process performance and decreases response time based on different kinds of distribution.

  10. Fast Construction of Plant Architectural Models Based on Substructure Decomposition

    Institute of Scientific and Technical Information of China (English)

    YAN HongPing (严红平); Philippe de Reffye; PAN ChunHong (潘春洪); HU BaoGang (胡包钢)

    2003-01-01

    Plant structure, representing the physical link among different organs, includes many similar substructures. In this paper, a new method is presented to construct plant architectural models of most plant species. The plant structure is decomposed into a stem, a set of lateral substructures and a terminal substructure, which is called substructure decomposition; then based on substructure decomposition, the plant structures are expressed in an iterative way; and further the derivative formula is employed to compute the number of organs in plant structures to get the geometrical sizes of 3D plant organs by borrowing Hydraulic Model. Using 3D organs, a substructure library is built. Based on the substructures stored in substructure library, one can construct 3D plant structure according to certain topological and geometrical rules. The experiments with different plant species are included in this paper to demonstrate the validity of the new method for constructing plant structures. The experimental results show that the approach follows botanical knowledge with high efficiency in constructing plant structures of most plant species. In addition,this method enables users to check the detail information of plant structure.

  11. Policy improvement by a model-free Dyna architecture.

    Science.gov (United States)

    Hwang, Kao-Shing; Lo, Chia-Yue

    2013-05-01

    The objective of this paper is to accelerate the process of policy improvement in reinforcement learning. The proposed Dyna-style system combines two learning schemes, one of which utilizes a temporal difference method for direct learning; the other uses relative values for indirect learning in planning between two successive direct learning cycles. Instead of establishing a complicated world model, the approach introduces a simple predictor of average rewards to actor-critic architecture in the simulation (planning) mode. The relative value of a state, defined as the accumulated differences between immediate reward and average reward, is used to steer the improvement process in the right direction. The proposed learning scheme is applied to control a pendulum system for tracking a desired trajectory to demonstrate its adaptability and robustness. Through reinforcement signals from the environment, the system takes the appropriate action to drive an unknown dynamic to track desired outputs in few learning cycles. Comparisons are made between the proposed model-free method, a connectionist adaptive heuristic critic, and an advanced method of Dyna-Q learning in the experiments of labyrinth exploration. The proposed method outperforms its counterparts in terms of elapsed time and convergence rate. PMID:24808427

  12. The EPIC Architecture for Modeling Human Information-Processing and Performance: A Brief Introduction.

    Science.gov (United States)

    Kieras, David E.; Meyer, David E.

    EPIC (Executive Process-Interactive Control) is a human information-processing architecture that is especially suited for modeling multiple-task performance. The EPIC architecture includes peripheral sensory-motor processors surrounding a production-rule cognitive processor, and is being used to construct precise computational models for basic…

  13. Modeling of Incubation Time for Austenite to Ferrite Phase Transformation

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xiao-guang; LIU Zhen-yu; WU Di; WANG Wei; JIAO Si-hai

    2006-01-01

    On the basis of the classical nucleation theory, a new model of incubation time for austenite to ferrite transformation has been developed, in which the effect of deformation on austenite has been taken into consideration. To prove the precision of modeling, ferrite transformation starting temperature (Ar3) has been calculated using the Scheil′s additivity rule, and the Ar3 values were measured using a Gleeble 1500 thermomechanical simulator. The Ar3 values provided by the modeling method coincide with the measured ones, indicating that the model is precise in predicting the incubation time for austenite to ferrite transformation in hot deformed steels.

  14. DSL development based on target meta-models. Using AST transformations for automating semantic analysis in a textual DSL framework

    CERN Document Server

    Breslav, Andrey

    2008-01-01

    This paper describes an approach to creating textual syntax for Do- main-Specific Languages (DSL). We consider target meta-model to be the main artifact and hence to be developed first. The key idea is to represent analysis of textual syntax as a sequence of transformations. This is made by explicit opera- tions on abstract syntax trees (ATS), for which a simple language is proposed. Text-to-model transformation is divided into two parts: text-to-AST (developed by openArchitectureWare [1]) and AST-to-model (proposed by this paper). Our approach simplifies semantic analysis and helps to generate as much as possi- ble.

  15. Dynamic information architecture system (DIAS) : multiple model simulation management.

    Energy Technology Data Exchange (ETDEWEB)

    Simunich, K. L.; Sydelko, P.; Dolph, J.; Christiansen, J.

    2002-05-13

    Dynamic Information Architecture System (DIAS) is a flexible, extensible, object-based framework for developing and maintaining complex multidisciplinary simulations of a wide variety of application contexts. The modeling domain of a specific DIAS-based simulation is determined by (1) software Entity (domain-specific) objects that represent the real-world entities that comprise the problem space (atmosphere, watershed, human), and (2) simulation models and other data processing applications that express the dynamic behaviors of the domain entities. In DIAS, models communicate only with Entity objects, never with each other. Each Entity object has a number of Parameter and Aspect (of behavior) objects associated with it. The Parameter objects contain the state properties of the Entity object. The Aspect objects represent the behaviors of the Entity object and how it interacts with other objects. DIAS extends the ''Object'' paradigm by abstraction of the object's dynamic behaviors, separating the ''WHAT'' from the ''HOW.'' DIAS object class definitions contain an abstract description of the various aspects of the object's behavior (the WHAT), but no implementation details (the HOW). Separate DIAS models/applications carry the implementation of object behaviors (the HOW). Any model deemed appropriate, including existing legacy-type models written in other languages, can drive entity object behavior. The DIAS design promotes plug-and-play of alternative models, with minimal recoding of existing applications. The DIAS Context Builder object builds a constructs or scenario for the simulation, based on developer specification and user inputs. Because DIAS is a discrete event simulation system, there is a Simulation Manager object with which all events are processed. Any class that registers to receive events must implement an event handler (method) to process the event during execution. Event handlers

  16. Multi Channel Architecture Model Based on Service Oriented Integration

    Directory of Open Access Journals (Sweden)

    Ion LUNGU

    2008-01-01

    Full Text Available The volume of data and numerous applications developed within a company can often generate a redundancy difficult to control. In the same time, the homogeneous or heterogeneous management systems of the companies become overcharged for obtaining useful information from databases. For this reason, the organizations develop specialized systems for the integration of existing applications and data. To achieve these systems, there are used a number of technologies, methods and architectures such as SOA architecture. In this article, are presented the components of SOA architecture, its advantages and a solution for integrating applications at the Presentation Tier.

  17. Modelling and visualising modular product architectures for mass customisation

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Pedersen, Rasmus; Kvist, Morten;

    2008-01-01

    companies are striving for variety from a commercial- and simplicity from a manufacturing one. A conscious structuring of product architectures and/or the use of product platforms can help overcome this challenge. This paper presents a new method for the synthesis and visualisation of product architecture...... concepts that puts emphasis on variety in markets while also treating the consequences in the manufacturing set-up. The work is based on the assumption that a graphical overview of a given solution space and relations between market demands, product architecture and manufacturing layout can support...... decision making and constitute a very powerful interaction between stakeholders in product development departments striving for mass customisation....

  18. Considerations Concerning Matrix Diagram Transformations Associated with Mathematical Model Study of a Three-phase Transformer

    Directory of Open Access Journals (Sweden)

    Mihaela Poienar

    2014-09-01

    Full Text Available The clock hour figure mathematical model of a threephase transformer can be expressed, in the most plain form, through a 3X3 square matrix, called code matrix. The lines position reflect the modification in the high voltage windings terminal and the columns position reflect the modification in the low voltage winding terminal. The main changes on the transformer winding terminal are: the circular permutation of connection between windings; terminal supply reversal; reverse direction for the phase winding wrapping; reversal the beginning with the end for a phase winding; the connection conversion from N in Z between phase winding or inverse. The analytical form of these changes actually affect the configuration of the mathematical model expressed through a transformations diagram proposed and analyzed in two ways: bipolar version and unipolar version (fanwise. In the end of the paper are presented about the practical exploitation of the transformations diagram.

  19. Definition of an Object-Oriented Modeling Language for Enterprise Architecture

    OpenAIRE

    Lê, Lam Son; Wegmann, Alain

    2005-01-01

    In enterprise architecture, the goal is to integrate business resources and IT resources in order to improve an enterprises competitiveness. In an enterprise architecture project, the development team usually constructs a model that represents the enterprise: the enterprise model. In this paper, we present a modeling language for building such enterprise models. Our enterprise models are hierarchical object-oriented representations of the enterprises. This paper presents the foundations of o...

  20. NEURAL NETWORKS ARCHITECTURES FOR MODELING AND SIMULATION OF THE ECONOMY SYSTEM DYNAMICS

    OpenAIRE

    Nicolae Tudoroiu; Claudiu Chiru; Manuela Grigore

    2009-01-01

    This research work investigates the possibility to apply several neural network architectures for simulation and prediction of the dynamic behavior of the complex economic processes. Therefore we will explore different neural networks architectures to build several neural models of the complex dynamic economy system. In future work we will use these architectures to be trained by well-known training algorithms, such as Levenberg-Marquardt back-propagation error and Radial Basic Function (RBF)...

  1. Application of Enterprise Models for Engineering Enterprise Transformation

    OpenAIRE

    Aier, Stephan; Gleichauf, Bettina

    2010-01-01

    Enterprise models constitute a valuable basis for enterprise transformation because they usually represent a widely accepted image of an enterprise. Practitioners often put a lot of effort in the creation and maintenance of such models that therefore represent a significant investment. However, so far the information contained in enterprise models is to a large extend dateless which means it is hardly used to describe the transformation itself consistently. Therefore we propose a method to sy...

  2. A Type-Theoretic Framework for Certified Model Transformations

    Science.gov (United States)

    Calegari, Daniel; Luna, Carlos; Szasz, Nora; Tasistro, Álvaro

    We present a framework based on the Calculus of Inductive Constructions (CIC) and its associated tool the Coq proof assistant to allow certification of model transformations in the context of Model-Driven Engineering (MDE). The approached is based on a semi-automatic translation process from metamodels, models and transformations of the MDE technical space into types, propositions and functions of the CIC technical space. We describe this translation and illustrate its use in a standard case study.

  3. Integrating acoustic analysis in the architectural design process using parametric modelling

    DEFF Research Database (Denmark)

    Peters, Brady

    2011-01-01

    This paper discusses how parametric modeling techniques can be used to provide architectural designers with a better understanding of the acoustic performance of their designs and provide acoustic engineers with models that can be analyzed using computational acoustic analysis software. Architects...... parametric modeling, acoustic performance can inform the geometry and material logic of the design. In this way, the architectural design and the acoustic analysis model become linked........ This can provide a method by which architects and engineers can work together more efficiently and communicate better. This research is illustrated through the design of an architectural project, a new school in Copenhagen, Denmark by JJW Architects, where parametric modeling techniques have been used...

  4. Architectural freedom and industrialised architecture

    DEFF Research Database (Denmark)

    Vestergaard, Inge

    2012-01-01

    Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l inge.vestergaard@aarch.dk Based on the repetitive architecture from the "building boom" 1960...... to 1973 it is discussed how architects can handle these Danish element and montage buildings through the transformation to upgraded aesthetical, functional and energy efficient architecture. The method used is analysis of cases, parallels to literature studies and producer interviews. This analysis...... compares "best practice" in Denmark and "best practice" in Austria. The modern architects accepted the fact that industrialized architecture told the storey of repetition and monotonous as basic condition. This article aims to explain that architecture can be thought as a complex and diverse design through...

  5. Modelling the International Climate Change Negotiations: A Non-Technical Outline of Model Architecture

    Energy Technology Data Exchange (ETDEWEB)

    Underdal, Arild

    1997-12-31

    This report discusses in non-technical terms the overall architecture of a model that will be designed to enable the user to (1) explore systematically the political feasibility of alternative policy options and (2) to determine the set of politically feasible solutions in the global climate change negotiations. 25 refs., 2 figs., 1 tab.

  6. The Integration of Architectural Design and Energy Modelling Software

    OpenAIRE

    Hetherington, Robina

    2013-01-01

    Intelligent and integrated architectural design can substantially reduce carbon dioxide emissions from energy used in buildings. However, architects need new tools to help them to design enjoyable, comfortable, attractive and yet technically rigorous, low energy buildings. This thesis investigates, by means of a Research Through Design approach, how architectural software could be better designed to fulfil this need by the integration of design, energy simulation and decision support systems....

  7. DEPENDABLE PRIVACY REQUIREMENTS BY AGILE MODELED LAYERED SECURITY ARCHITECTURES – WEB SERVICES CASE STUDY

    Directory of Open Access Journals (Sweden)

    M.Upendra Kumar

    2011-07-01

    Full Text Available Software Engineering covers the definition of processes, techniques and models suitable for its environment to guarantee quality of results. An important design artifact in any software development project is the Software Architecture. Software Architecture’s important part is the set of architectural design rules. A primary goal of the architecture is to capture the architecture design decisions. An important part of these design decisions consists of architectural design rules In an MDA (Model-Driven Architecture context, the design of the system architecture is captured in the models of the system. MDA is known to be layered approach for modeling the architectural design rules and uses design patterns to improve the quality of software system. And to include the security to the software system, security patterns are introduced that offer security at the architectural level. More over, agile software development methods are used to build secure systems. There are different methods defined in agile development as extreme programming (XP, scrum, feature driven development (FDD, test driven development (TDD, etc. Agile processing is includes the phases as agile analysis, agile design and agile testing. These phases are defined in layers of MDA to provide security at the modeling level which ensures that security at the system architecture stage will improve the requirements for that system. Agile modeled Layered Security Architectures increase the dependability of the architecture in terms of privacy requirements. We validate this with a case study of dependability of privacy of Web Services Security Architectures, which helps for secure service oriented security architecture. In this paper the major part is given to model architectural design rules using MDA so that architects and developers are responsible to automatic enforcement on the detailed design and easy to understand and use by both of them. This MDA approach is implemented in use of

  8. Code Generation by Model Transformation: A Case Study in Transformation Modularity

    NARCIS (Netherlands)

    Hemel, Z.; Kats, L.C.L.; Visser, E.

    2008-01-01

    Preprint of paper published in: Theory and Practice of Model Transformations (ICMT 2008), Lecture Notes in Computer Science 5063; doi:10.1007/978-3-540-69927-9_13 The realization of model-driven software development requires effective techniques for implementing code generators for domain-specific

  9. Has the Nordic Welfare Model Been Transformed?

    DEFF Research Database (Denmark)

    Greve, Bent; Kvist, Jon

    2011-01-01

    schemes - collective and individual - supplementing public schemes is well documented, scant attention has focused on more recent developments in other areas of the welfare state. This article shows how the multi-tiered welfare state spread in the 2000s to policies for families, the unemployed and the...... sick. Although Denmark still offers universal coverage in core welfare state areas, the increased use of occupational and fiscal welfare as well as changes in public schemes has gradually transformed the nation into a multi-tiered welfare state that is more dualistic and individualistic, with...

  10. Modeling the Contribution of Enterprise Architecture Practice to the Achievement of Business Goals

    Science.gov (United States)

    van Steenbergen, Marlies; Brinkkemper, Sjaak

    Enterprise architecture is a young, but well-accepted discipline in information management. Establishing the effectiveness of an enterprise architecture practice, however, appears difficult. In this chapter we introduce an architecture effectiveness model (AEM) to express how enterprise architecture practices are meant to contribute to the business goals of an organization. We developed an AEM for three different organizations. These three instances show that the concept of the AEM is applicable in a variety of organizations. It also shows that the objectives of enterprise architecture are not to be restricted to financial goals. The AEM can be used by organizations to set coherent priorities for their architectural practices and to define KPIs for measuring the effectiveness of these practices.

  11. On model architecture for a children's speech recognition interactive dialog system

    OpenAIRE

    Kraleva, Radoslava; Kralev, Velin

    2016-01-01

    This report presents a general model of the architecture of information systems for the speech recognition of children. It presents a model of the speech data stream and how it works. The result of these studies and presented veins architectural model shows that research needs to be focused on acoustic-phonetic modeling in order to improve the quality of children's speech recognition and the sustainability of the systems to noise and changes in transmission environment. Another important aspe...

  12. Fast tracking ICT infrastructure requirements and design, based on Enterprise Reference Architecture and matching Reference Models

    DEFF Research Database (Denmark)

    Bernus, Peter; Baltrusch, Rob; Vesterager, Johan;

    2002-01-01

    marketing, global engineering, and customer relationship management. The reference models are the basis for the development of ICT infrastructure requirements. These in turn can be used for ICT infrastructure specification (sometimes referred to as 'ICT architecture').Part of the ICT architecture is...

  13. Generic Architecture for Cloud Infrastructure as a Service (IaaS) Provisioning Model

    NARCIS (Netherlands)

    Demchenko, Y.; Ham, J. van der; Strijkers, R.J.; Ghijsen, M.; Ngo, C.; Cristea, M.

    2011-01-01

    This document provides information about the proposed architectural framework for Cloud Infrastructure as a Service (IaaS) provisioning model that includes the following components: the Composable Services Architecture (CSA) that intends to provide a conceptual and methodological framework for devel

  14. Inference for stochastic volatility model using time change transformations

    OpenAIRE

    Kalogeropoulos, Konstantinos; Roberts, Gareth O.; Dellaportas, Petros

    2007-01-01

    We address the problem of parameter estimation for diffusion driven stochastic volatility models through Markov chain Monte Carlo (MCMC). To avoid degeneracy issues we introduce an innovative reparametrisation defined through transformations that operate on the time scale of the diffusion. A novel MCMC scheme which overcomes the inherent difficulties of time change transformations is also presented. The algorithm is fast to implement and applies to models with stochastic volatility. The me...

  15. Transforming High School Physics with Modeling and Computation

    OpenAIRE

    Aiken, John M.

    2013-01-01

    The Engage to Excel (PCAST) report, the National Research Council's Framework for K-12 Science Education, and the Next Generation Science Standards all call for transforming the physics classroom into an environment that teaches students real scientific practices. This work describes the early stages of one such attempt to transform a high school physics classroom. Specifically, a series of model-building and computational modeling exercises were piloted in a ninth grade Physics First classro...

  16. The comparison study among several data transformations in autoregressive modeling

    Science.gov (United States)

    Setiyowati, Susi; Waluyo, Ramdhani Try

    2015-12-01

    In finance, the adjusted close of stocks are used to observe the performance of a company. The extreme prices, which may increase or decrease drastically, are often become particular concerned since it can impact to bankruptcy. As preventing action, the investors have to observe the future (forecasting) stock prices comprehensively. For that purpose, time series analysis could be one of statistical methods that can be implemented, for both stationary and non-stationary processes. Since the variability process of stocks prices tend to large and also most of time the extreme values are always exist, then it is necessary to do data transformation so that the time series models, i.e. autoregressive model, could be applied appropriately. One of popular data transformation in finance is return model, in addition to ratio of logarithm and some others Tukey ladder transformation. In this paper these transformations are applied to AR stationary models and non-stationary ARCH and GARCH models through some simulations with varying parameters. As results, this work present the suggestion table that shows transformations behavior for some condition of parameters and models. It is confirmed that the better transformation is obtained, depends on type of data distributions. In other hands, the parameter conditions term give significant influence either.

  17. Electromagnetic Vibration Energy Harvesting Devices Architectures, Design, Modeling and Optimization

    CERN Document Server

    Spreemann, Dirk

    2012-01-01

    Electromagnetic vibration transducers are seen as an effective way of harvesting ambient energy for the supply of sensor monitoring systems. Different electromagnetic coupling architectures have been employed but no comprehensive comparison with respect to their output performance has been carried out up to now. Electromagnetic Vibration Energy Harvesting Devices introduces an optimization approach which is applied to determine optimal dimensions of the components (magnet, coil and back iron). Eight different commonly applied coupling architectures are investigated. The results show that correct dimensions are of great significance for maximizing the efficiency of the energy conversion. A comparison yields the architectures with the best output performance capability which should be preferably employed in applications. A prototype development is used to demonstrate how the optimization calculations can be integrated into the design–flow. Electromagnetic Vibration Energy Harvesting Devices targets the design...

  18. An Object-Oriented Architecture Model for International Information Systems?

    OpenAIRE

    Hans Lehmann

    2003-01-01

    Analysing four case vignettes in a grounded theory approach, this exploratory paper investigates the architecture and design principles of international information systems. A two-dimensional topology for international information systems—suggested in previous research—was confirmed as a useful architecture paradigm. In its terms, international information systems are configured from two elements: ‘Core’ systems (common for the whole enterprise) on the one hand and ‘Local’ systems...

  19. An Open Distributed Architecture for Flexible Hybrid Assembly Systems: A Model Driven Engineering Approach

    OpenAIRE

    Thramboulidis, Kleanthis

    2014-01-01

    Assembly systems constitute one of the most important fields in today industry. In this paper we propose an open distributed architecture for the engineering of evolvable flexible hybrid assembly systems. The proposed architecture is based on the model driven development paradigm. Models are used to represent structure and behavior and a domain specific engineering tool is defined to facilitate the assembly system engineer in the engineering process of the assembly system. Specific meta model...

  20. Conceptual Model of Information Technology Architecture for Service-Based Enterprises

    Directory of Open Access Journals (Sweden)

    Fariborz Mousavi Madani

    2012-03-01

    Full Text Available This paper presented a conceptual model for information technology architecture. For this goal, after reviewing conceptual models of enterprise architecture, key dimensions of them were described and prioritized by using Shannon’s entropy. To determine building blocks of each dimension, customer requirements have been mapped to functional requirements by using axiomatic method. The model has been described by goals, components and relationships. Then, it has been validated by surveying experts

  1. Architecture and Behavior Modeling of Cyber-Physical Systems with MontiArcAutomaton

    OpenAIRE

    Ringert, Jan Oliver; Rumpe, Bernhard; Wortmann, Andreas

    2015-01-01

    This book presents MontiArcAutomaton, a modeling language for architecture and be- havior modeling of Cyber-Physical Systems as interactive Component & Connector mod- els. MontiArcAutomaton extends the Architecture Description Language MontiArc with automata to describe component behavior. The modeling language MontiArcAutomaton provides syntactical elements for defin- ing automata with states, variables, and transitions inside MontiArc components. These syntactical elements and a basic set o...

  2. Semantic Web on Scope: A New Architectural Model for the Semantic Web

    Directory of Open Access Journals (Sweden)

    Haytham T. Al-Feel

    2008-01-01

    Full Text Available Problem Statement: Current web contains billions of documents and has many administrative problems and limitations; in addition to that the web content is still accessible only to humans. The solution to these problems is the Semantic Web. The Semantic Web is considered to be the extension for the current web. But there are problems facing the Semantic Web now, such as there is no clear architecture for it, there are four versions created by Tim Berners-Lee, but still up to now there is no agreement for one of these visions nor is there a clear picture for the relation between different layers inside this architecture and the associated technologies. The objectives of this study were to: (i Identify the weaknesses that existed in the previous architectures and (ii Reach a new architecture that corrects these weaknesses. Approach: This research uses the Qualitative Analysis Approach of Taylor and Renner, presents the four versions of the Semantic Web architecture, describing the function(s and status of each layer and associated technologies, evaluates them using Gerber evaluation method and determines other design principles needed to modify and adapt this architecture as a step toward an agreement for one Semantic Web architecture. Results: The design of a new model for the Semantic Web architecture depends on the idea of previous versions. Conclusion: As a step toward a unified architecture for the Semantic Web, our study of the Semantic Web architecture highlighted some weaknesses that existed in the previous architectures, modify, adapt and reach a new architecture that corrects these weaknesses.

  3. Transforming teacher knowledge: Modeling instruction in physics

    Science.gov (United States)

    Cabot, Lloyd H.

    I show that the Modeling physics curriculum is readily accommodated by most teachers in favor of traditional didactic pedagogies. This is so, at least in part, because Modeling focuses on a small set of connected models embedded in a self-consistent theoretical framework and thus is closely congruent with human cognition in this context which is to generate mental models of physical phenomena as both predictive and explanatory devices. Whether a teacher fully implements the Modeling pedagogy depends on the depth of the teacher's commitment to inquiry-based instruction, specifically Modeling instruction, as a means of promoting student understanding of Newtonian mechanics. Moreover, this commitment trumps all other characteristics: teacher educational background, content coverage issues, student achievement data, district or state learning standards, and district or state student assessments. Indeed, distinctive differences exist in how Modeling teachers deliver their curricula and some teachers are measurably more effective than others in their delivery, but they all share an unshakable belief in the efficacy of inquiry-based, constructivist-oriented instruction. The Modeling Workshops' pedagogy, duration, and social interactions impacts teachers' self-identification as members of a professional community. Finally, I discuss the consequences my research may have for the Modeling Instruction program designers and for designers of professional development programs generally.

  4. K factor estimation in distribution transformers using linear regression models

    Directory of Open Access Journals (Sweden)

    Juan Miguel Astorga Gómez

    2016-06-01

    Full Text Available Background: Due to massive incorporation of electronic equipment to distribution systems, distribution transformers are subject to operation conditions other than the design ones, because of the circulation of harmonic currents. It is necessary to quantify the effect produced by these harmonic currents to determine the capacity of the transformer to withstand these new operating conditions. The K-factor is an indicator that estimates the ability of a transformer to withstand the thermal effects caused by harmonic currents. This article presents a linear regression model to estimate the value of the K-factor, from total current harmonic content obtained with low-cost equipment.Method: Two distribution transformers that feed different loads are studied variables, current total harmonic distortion factor K are recorded, and the regression model that best fits the data field is determined. To select the regression model the coefficient of determination R2 and the Akaike Information Criterion (AIC are used. With the selected model, the K-factor is estimated to actual operating conditions.Results: Once determined the model it was found that for both agricultural cargo and industrial mining, present harmonic content (THDi exceeds the values that these transformers can drive (average of 12.54% and minimum 8,90% in the case of agriculture and average value of 18.53% and a minimum of 6.80%, for industrial mining case.Conclusions: When estimating the K factor using polynomial models it was determined that studied transformers can not withstand the current total harmonic distortion of their current loads. The appropriate K factor for studied transformer should be 4; this allows transformers support the current total harmonic distortion of their respective loads.

  5. Lithospheric Architecture, Heterogenities, Instabilities, Melting - insight form numerical modelling

    Science.gov (United States)

    Gorczyk, Weronika; Hobbs, Bruce; Ord, Alison; Gessner, Klaus; Gerya, Taras V.

    2010-05-01

    The seismological structure of the Earth's lithosphere is identified to be strongly heterogeneous in terms of thermal and rheological structures. Lithospheric discontinuities (sharp changes in the thermal and/or compositional structure) are thought to be long lived and are mostly correlated with major tectonic boundaries that commonly have been reactivated and which subsequently are the foci of magma intrusion and major mineralization. Resent studies have shown that mantle metasomatism is also controlled by such boundaries. This paper explores the control that lithospheric heterogeneity exerts on the thermal and chemical evolution during deformation subsequent to the development of the heterogeneity. We explore the behaviour of the rheological heterogeneous lithosphere in a compressional regime. The occurrence of such variations may be caused for instance by amalgamation of micro-continents such as is thought to be characteristic of the Yilgarn, Western Australia or South Africa. Theses micro-continents, due to diverse histories may be characterised by various thermal and rheological structures. The models are simplistic but illustrate the basic principles. The code used in this study is based on a conservative finite-difference, multi-grid, marker in cell method. Devolatilisation reactions and melting can affect the physical properties of rocks and are incorporated in a self-consistent manner. We use a petrological-thermomechanical modelling approach with all rock properties including mechanical properties calculated in the Lagrangian scheme for rock markers at every time step based on Gibbs free energy minimization as a function of the local pressure, temperature and rock composition. The results illustrate that initial structural complexity is necessary for and has a dramatic effect on fault and development, the growth of deep basins, core complex formation, melting and devolatilisation within the lithosphere. The horizontal and vertical variation in plastic

  6. Description Model of Warehouse Architecture for Clinical Test at the Molecular Immunology Centre

    Directory of Open Access Journals (Sweden)

    Anthony Rafael Sotolongo León

    2012-05-01

    Full Text Available Accurate and detailed description of the architecture of computer systems is very important to achieve success in their development. As informatic solutions, data warehouses and software support decision-making in institutions that need to implement a detailed description of the architecture. Ralph Kimball proposes the aspects to be considered of the description and explains how it is done. There are specific models used to describe the architecture such as Kruchten 4 +1 views of meta-model or the Common Warehouse Metamodel (CWM however these models do not meet the need of the description that requires a data warehouse that integrates information from clinical trials of the Molecular Immunology Centre (CIM. In this paper we propose a model for describing the data warehouse architecture that fits the needs of the Molecular Immunology Center following the Kimball framework and using as UML 2.0 modeling language.

  7. Architectural Interventions and Urban Transformation in the Arrangement of Mevlana Celaleddýn Rumý Square Ignoring Ontological Planning Approach

    OpenAIRE

    Bala, Havva Alkan; Alkan, Ahmet

    2014-01-01

    If urban design decisions are taken ignoring the historical value of buildings, cultural inputs and meaning of the space based on memories and experiences, the sense of place disappears like in Konya Mevlana Celaleddin Rumi Square. Konya was the capital of Anatolian Seljuk, and the Mevlana Celaleddin Tomb, which is the symbol of the city. The aim of this study is to try to understand the architectural interventions and urban transformation within Konya Mevlana Celaleddin Rumi Square that has ...

  8. Architectural Interventions and Urban Transformation in the Arrangement of Mevlana Celaleddın Rumı Square Ignoring Ontological Planning Approach

    OpenAIRE

    Havva Alkan Bala; Ahmet Alkan

    2014-01-01

    If urban design decisions are taken ignoring the historical value of buildings, cultural inputs and meaning of the space based on memories and experiences, the sense of place disappears like in Konya Mevlana Celaleddin Rumi Square. Konya was the capital of Anatolian Seljuk, and the Mevlana Celaleddin Tomb, which is the symbol of the city. The aim of this study is to try to understand the architectural interventions and urban transformation within Konya Mevlana Celaleddin Rumi Square that has ...

  9. Evaluating the Effectiveness of Reference Models in Federating Enterprise Architectures

    Science.gov (United States)

    Wilson, Jeffery A.

    2012-01-01

    Agencies need to collaborate with each other to perform missions, improve mission performance, and find efficiencies. The ability of individual government agencies to collaborate with each other for mission and business success and efficiency is complicated by the different techniques used to describe their Enterprise Architectures (EAs).…

  10. Transformation

    DEFF Research Database (Denmark)

    Peters, Terri

    2011-01-01

    Artiklen diskuterer ordet "transformation" med udgangspunkt i dels hvorledes ordet bruges i arkitektfaglig terminologi og dels med fokus på ordets potentielle indhold og egnethed i samme teminologi.......Artiklen diskuterer ordet "transformation" med udgangspunkt i dels hvorledes ordet bruges i arkitektfaglig terminologi og dels med fokus på ordets potentielle indhold og egnethed i samme teminologi....

  11. TRANSFORMATION

    Energy Technology Data Exchange (ETDEWEB)

    LACKS,S.A.

    2003-10-09

    Transformation, which alters the genetic makeup of an individual, is a concept that intrigues the human imagination. In Streptococcus pneumoniae such transformation was first demonstrated. Perhaps our fascination with genetics derived from our ancestors observing their own progeny, with its retention and assortment of parental traits, but such interest must have been accelerated after the dawn of agriculture. It was in pea plants that Gregor Mendel in the late 1800s examined inherited traits and found them to be determined by physical elements, or genes, passed from parents to progeny. In our day, the material basis of these genetic determinants was revealed to be DNA by the lowly bacteria, in particular, the pneumococcus. For this species, transformation by free DNA is a sexual process that enables cells to sport new combinations of genes and traits. Genetic transformation of the type found in S. pneumoniae occurs naturally in many species of bacteria (70), but, initially only a few other transformable species were found, namely, Haemophilus influenzae, Neisseria meningitides, Neisseria gonorrheae, and Bacillus subtilis (96). Natural transformation, which requires a set of genes evolved for the purpose, contrasts with artificial transformation, which is accomplished by shocking cells either electrically, as in electroporation, or by ionic and temperature shifts. Although such artificial treatments can introduce very small amounts of DNA into virtually any type of cell, the amounts introduced by natural transformation are a million-fold greater, and S. pneumoniae can take up as much as 10% of its cellular DNA content (40).

  12. Modelling spatial density using continuous wavelet transforms

    Indian Academy of Sciences (India)

    D Sudheer Reddy; N Gopal Reddy; A K Anilkumar

    2013-02-01

    Due to increase in the satelite launch activities from many countries around the world the orbital debris issue has become a major concern for the space agencies to plan a collision-free orbit design. The risk of collisions is calculated using the in situ measurements and available models. Spatial density models are useful in understanding the long-term likelihood of a collision in a particular region of space and also helpful in pre-launch orbit planning. In this paper, we present a method of estimating model parameters such as number of peaks and peak locations of spatial density model using continuous wavelets. The proposed methodology was experimented with two line element data and the results are presented.

  13. Transforming Very Large Models in the Cloud: a Research Roadmap

    OpenAIRE

    Clasen, Cauê; Didonet Del Fabro, Marcos; Tisi, Massimo

    2012-01-01

    International audience Model transformations are widely used by Model-Driven Engineering (MDE) platforms to apply different kinds of operations over models, such as model translation, evolution or composition. However, existing solutions are not designed to handle very large models (VLMs), thus facing scalability issues. Coupling MDE with cloud-based platforms may help solving these issues. Since cloud-based platforms are relatively new, researchers still need to investigate if/how/when MD...

  14. TIME SERIES ANALYSIS USING A UNIQUE MODEL OF TRANSFORMATION

    Directory of Open Access Journals (Sweden)

    Goran Klepac

    2007-12-01

    Full Text Available REFII1 model is an authorial mathematical model for time series data mining. The main purpose of that model is to automate time series analysis, through a unique transformation model of time series. An advantage of this approach of time series analysis is the linkage of different methods for time series analysis, linking traditional data mining tools in time series, and constructing new algorithms for analyzing time series. It is worth mentioning that REFII model is not a closed system, which means that we have a finite set of methods. At first, this is a model for transformation of values of time series, which prepares data used by different sets of methods based on the same model of transformation in a domain of problem space. REFII model gives a new approach in time series analysis based on a unique model of transformation, which is a base for all kind of time series analysis. The advantage of REFII model is its possible application in many different areas such as finance, medicine, voice recognition, face recognition and text mining.

  15. Theory and Modeling of Phase Transformations under Stress in Steel

    Institute of Scientific and Technical Information of China (English)

    T.Y. Hsu (XU Zu-yao)

    2004-01-01

    Thermodynamic prediction of the increment of the formation temperature of proeutectoid ferrite by applied stress is nearly consistent with the experimental data. Kinetics models for ferrite, pearlite and bainite transformations can be shown as modified Johnson-Mehl-Avrami equation in which parameter b(σ) varies with the level of applied stress.The effects of tensile and compressive stresses on enhancement of the ferrite/pearlite and bainite transformations are discussed. The necessity and approach of modification of additivity hypothesis are introduced and the results from modified equation in which some parameters are obtained by regression of two experimental results or taken from TTT and CCT diagrams of a certain steel are superior than that from Scheil's equation. Thermodynamic calculation of Ms and nucleation kinetics equations of martensitic transformation under stress are suggested. Modeling of phase transformations under stress in ferrous alloys is briefly described.

  16. An Agent-Based Dynamic Model for Analysis of Distributed Space Exploration Architectures

    Science.gov (United States)

    Sindiy, Oleg V.; DeLaurentis, Daniel A.; Stein, William B.

    2009-07-01

    A range of complex challenges, but also potentially unique rewards, underlie the development of exploration architectures that use a distributed, dynamic network of resources across the solar system. From a methodological perspective, the prime challenge is to systematically model the evolution (and quantify comparative performance) of such architectures, under uncertainty, to effectively direct further study of specialized trajectories, spacecraft technologies, concept of operations, and resource allocation. A process model for System-of-Systems Engineering is used to define time-varying performance measures for comparative architecture analysis and identification of distinguishing patterns among interoperating systems. Agent-based modeling serves as the means to create a discrete-time simulation that generates dynamics for the study of architecture evolution. A Solar System Mobility Network proof-of-concept problem is introduced representing a set of longer-term, distributed exploration architectures. Options within this set revolve around deployment of human and robotic exploration and infrastructure assets, their organization, interoperability, and evolution, i.e., a system-of-systems. Agent-based simulations quantify relative payoffs for a fully distributed architecture (which can be significant over the long term), the latency period before they are manifest, and the up-front investment (which can be substantial compared to alternatives). Verification and sensitivity results provide further insight on development paths and indicate that the framework and simulation modeling approach may be useful in architectural design of other space exploration mass, energy, and information exchange settings.

  17. Rapid architecture alternative modeling (RAAM): A framework for capability-based analysis of system of systems architectures

    Science.gov (United States)

    Iacobucci, Joseph V.

    The research objective for this manuscript is to develop a Rapid Architecture Alternative Modeling (RAAM) methodology to enable traceable Pre-Milestone A decision making during the conceptual phase of design of a system of systems. Rather than following current trends that place an emphasis on adding more analysis which tends to increase the complexity of the decision making problem, RAAM improves on current methods by reducing both runtime and model creation complexity. RAAM draws upon principles from computer science, system architecting, and domain specific languages to enable the automatic generation and evaluation of architecture alternatives. For example, both mission dependent and mission independent metrics are considered. Mission dependent metrics are determined by the performance of systems accomplishing a task, such as Probability of Success. In contrast, mission independent metrics, such as acquisition cost, are solely determined and influenced by the other systems in the portfolio. RAAM also leverages advances in parallel computing to significantly reduce runtime by defining executable models that are readily amendable to parallelization. This allows the use of cloud computing infrastructures such as Amazon's Elastic Compute Cloud and the PASTEC cluster operated by the Georgia Institute of Technology Research Institute (GTRI). Also, the amount of data that can be generated when fully exploring the design space can quickly exceed the typical capacity of computational resources at the analyst's disposal. To counter this, specific algorithms and techniques are employed. Streaming algorithms and recursive architecture alternative evaluation algorithms are used that reduce computer memory requirements. Lastly, a domain specific language is created to provide a reduction in the computational time of executing the system of systems models. A domain specific language is a small, usually declarative language that offers expressive power focused on a particular

  18. Enterprise Architecture Model that Enables to Search for Patterns of Statistical Information

    Directory of Open Access Journals (Sweden)

    Oleg Chertov

    2013-06-01

    Full Text Available Enterprise architecture is the stem from which developing of any departmental information system should grow and around which it should revolve. In the paper, a fragment of an enterprise architecture model is built using ArchiMate language. This fragment enables to search for information in enterprises which do not work in productive industry. Such enterprises include official statistics. The proposed model embraces all three architectural levels of corresponding information systems, namely, OLTP, OLAP, and Data Mining. Particularly, the latter level enables to search for patterns of statistical information.

  19. Theoretical Model of Transformation Superlastic Diffusion Bonding for Eutectoid Steel

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on current theories of diffusion and creep cavity closure at high temperature, a theoretical analysis of phase transformation diffusion bonding for T8/T8 eutectoid steel is carried out. The diffusion bonding is mainly described as two-stage process: Ⅰ The interfacial cavity with shape change from diamond to cylinder.Ⅱ The radius of the cylindrical cavity are reduced and eliminated gradually. A new theoretical model is established for the process of transformation superplastic diffusion bonding (TSDB) ...

  20. Transforming community access to space science models

    Science.gov (United States)

    MacNeice, Peter; Hesse, Michael; Kuznetsova, Maria; Maddox, Marlo; Rastaetter, Lutz; Berrios, David; Pulkkinen, Antti

    2012-04-01

    Researching and forecasting the ever changing space environment (often referred to as space weather) and its influence on humans and their activities are model-intensive disciplines. This is true because the physical processes involved are complex, but, in contrast to terrestrial weather, the supporting observations are typically sparse. Models play a vital role in establishing a physically meaningful context for interpreting limited observations, testing theory, and producing both nowcasts and forecasts. For example, with accurate forecasting of hazardous space weather conditions, spacecraft operators can place sensitive systems in safe modes, and power utilities can protect critical network components from damage caused by large currents induced in transmission lines by geomagnetic storms.

  1. A multi-layered software architecture model for building software solutions in an urbanized information system

    Directory of Open Access Journals (Sweden)

    Sana Guetat

    2013-01-01

    Full Text Available The concept of Information Systems urbanization has been proposed since the late 1990’s in order to help organizations building agile information systems. Nevertheless, despite the advantages of this concept, it remains too descriptive and presents many weaknesses. In particular, there is a lack of useful architecture models dedicated to defining software solutions compliant with information systems urbanization principles and rules. Moreover, well-known software architecture models do not provide sufficient resources to address the requirements and constraints of urbanized information systems. In this paper, we draw on the “information city” framework to propose a model of software architecture - called the 5+1 Software Architecture Model - which is compliant with information systems urbanization principles and helps organizations building urbanized software solutions. This framework improves the well-established software architecture models and allows the integration of new architectural paradigms. Furthermore, the proposed model contributes to the implementation of information systems urbanization in several ways. On the one hand, this model devotes a specific layer to applications integration and software reuse. On the other hand, it contributes to the information system agility and scalability due to its conformity to the separation of concerns principle.

  2. Conveying Cappadocia. A new representation model for rock-cave architecture by contour lines and chromatic codes

    Directory of Open Access Journals (Sweden)

    Fabio Colonnese

    2016-05-01

    Full Text Available Architectural heritage preservation is based on an in-depth, multi-layered and interdisciplinary knowledge of the cultural heritage sites, especially when they are a combination between natural and artificial, such as rupestrian (cave architecture often is. Survey and representation of rock-cut architecture is one of the most problematic issues for a number of problems concerning the geometrical complexity of the interior and exterior enveloping surfaces. Laserscanner is an appropriate tool concerning the registration of geometric and spatial properties of artificial caves in continuity with the external topography, but automatic representations are often unable to convey their hidden geometric and spatial relationships. In the context of a work methodology customized on the rupestrian habitat of Cappadocia (Turkey, the authors developed an original envisioning model in which an associate use of contour lines and chromatic codes transforms traditional orthogonal projections after the numeric model into drawings able to offer a synthesis and transmit the complex forms and relationships of rupestrian settlements.

  3. A METHOD FOR THE DEVELOPMENT OF PLATFORM MODELS IN THE MODEL DRIVEN ARCHITECTURE CONTEXT

    OpenAIRE

    Paulo Cezar Stadzisz; Luciane Telinski Wiedermann Agner; Inali Wisniewski Soares; Jean Marcelo Simao

    2012-01-01

    The application of the Model Driven Architecture (MDA) approach to the design of embedded software based on Real-Time Operating Systems (RTOS) is encouraged by the fact that such software has a wide variety of platforms. In this way, the creation of methods for the development of platform models that meet such diversity of platforms is necessary. This study proposes a method called PM-MDA for the development of platform models that design embedded software based on RTOS in the context of MDA....

  4. Ontological perspective in metamodeling for model transformations.

    NARCIS (Netherlands)

    Göknil, A.; Topaloglu, N.Y.

    2005-01-01

    Model Driven Engineering (MDE) aims to facilitate building larger and more complex, reliable software systems by introducing a higher abstraction level than the code level. The technical space concept discusses how the basic MDE principles may be mapped onto modern platform support and several techn

  5. Robotic architecture based on electronic business models: from physics components to smart services

    OpenAIRE

    Berná Martínez, José Vicente; Maciá Pérez, Francisco; Gilart Iglesias, Virgilio; Marcos Jorquera, Diego

    2006-01-01

    This paper presents an approach for designing robots and robotic systems based on the application of models, architectures, techniques and tools that have contributed valid solutions in other areas, such as e-business. Before applying these solutions, the physical elements that make up a robotic system are subjected to a normalization process in order to characterize their functional contributions. In this way, the conceptual model and the technical architecture of the service-oriented archit...

  6. BIM-based Modeling and Data Enrichment of Classical Architectural Buildings

    OpenAIRE

    Fabrizio Ivan Apollonio; Marco Gaiani; Zheng Sun

    2012-01-01

    EnIn this paper we presented a BIM-based approach for the documentation of Architectural Heritage. Knowledge of classical architecture is first extracted from the treatises for parametric modeling in object level. Then we established a profile library based on semantic studies to sweep out different objects. Variants grow out from the parametric models by editing or regrouping parameters based on grammars. Multiple data including material, structure and real-life state are enriched with respe...

  7. An executable software architecture model for response time and reliability assessment

    OpenAIRE

    Zahra Norouzi; Ali Harounabadi

    2014-01-01

    With the increasing use of the Unified Modeling Language (UML) diagrams to describe the software’s architecture and the importance of evaluating nonfunctional requirements at the level of software architecture, creating an executable model from these diagrams is essential. On the other hand, the UML diagrams do not directly provide features to evaluate nonfunctional system requirements. Thus, these capabilities can be added to UML diagrams by applying efficiency and reliability stereotypes. B...

  8. K model for designing Data Driven Test Automation Frameworks and its Design Architecture Snow Leopard

    OpenAIRE

    Kachewar, Rohan R.

    2013-01-01

    Automated testing improves the efficiency of testing practice at various levels of projects in the organization. Unfortunately, we do not have a common architecture or common standards for designing frameworks across different test levels, projects and test tools which can assist developers, testers and business analysts. To address the above problem, in this paper, I have first proposed a unique reference model and then a design architecture using the proposed model for designing any Data Dr...

  9. Modeling and Efficient Simulation of Complex System-on-a-Chip Architectures

    OpenAIRE

    Kupriyanov, Olexiy

    2009-01-01

    The presented monograph discussed important aspects of modeling and cycle-accurate simulation in the domain of adaptive processor systems as well as specific architectures at instruction set and register transfer abstraction levels, respectively. The focus is mainly set to the task of generating efficient (in terms of speed and host processor resources usage) simulators. For this purpose, another task of modeling the adaptive multi-processor architectures is discussed. The problem in simulati...

  10. TRANSFORMER

    Science.gov (United States)

    Baker, W.R.

    1959-08-25

    Transformers of a type adapted for use with extreme high power vacuum tubes where current requirements may be of the order of 2,000 to 200,000 amperes are described. The transformer casing has the form of a re-entrant section being extended through an opening in one end of the cylinder to form a coaxial terminal arrangement. A toroidal multi-turn primary winding is disposed within the casing in coaxial relationship therein. In a second embodiment, means are provided for forming the casing as a multi-turn secondary. The transformer is characterized by minimized resistance heating, minimized external magnetic flux, and an economical construction.

  11. Multi Channel Architecture Model Based on Service Oriented Integration

    OpenAIRE

    Ion LUNGU; Davian POPESCU; Anda VELICANU

    2008-01-01

    The volume of data and numerous applications developed within a company can often generate a redundancy difficult to control. In the same time, the homogeneous or heterogeneous management systems of the companies become overcharged for obtaining useful information from databases. For this reason, the organizations develop specialized systems for the integration of existing applications and data. To achieve these systems, there are used a number of technologies, methods and architectures such ...

  12. Power, Performance and Energy Models and Systems for Emergent Architectures

    OpenAIRE

    Song, Shuaiwen

    2013-01-01

    Massive parallelism combined with complex memory hierarchies and heterogeneity in high-performance computing (HPC) systems form a barrier to efficient application and architecture design. The performance achievements of the past must continue over the next decade to address the needs of scientific simulations. However, building an exascale system by 2022 that uses less than 20 megawatts will require significant innovations in power and performance efficiency.    A key limitation of past appro...

  13. A self-organized internal models architecture for coding sensory-motor schemes

    Directory of Open Access Journals (Sweden)

    Esaú eEscobar Juárez

    2016-04-01

    Full Text Available Cognitive robotics research draws inspiration from theories and models on cognition, as conceived by neuroscience or cognitive psychology, to investigate biologically plausible computational models in artificial agents. In this field, the theoretical framework of Grounded Cognition provides epistemological and methodological grounds for the computational modeling of cognition. It has been stressed in the literature that textit{simulation}, textit{prediction}, and textit{multi-modal integration} are key aspects of cognition and that computational architectures capable of putting them into play in a biologically plausible way are a necessity.Research in this direction has brought extensive empirical evidencesuggesting that textit{Internal Models} are suitable mechanisms forsensory-motor integration. However, current Internal Models architectures show several drawbacks, mainly due to the lack of a unified substrate allowing for a true sensory-motor integration space, enabling flexible and scalable ways to model cognition under the embodiment hypothesis constraints.We propose the Self-Organized Internal ModelsArchitecture (SOIMA, a computational cognitive architecture coded by means of a network of self-organized maps, implementing coupled internal models that allow modeling multi-modal sensory-motor schemes. Our approach addresses integrally the issues of current implementations of Internal Models.We discuss the design and features of the architecture, and provide empirical results on a humanoid robot that demonstrate the benefits and potentialities of the SOIMA concept for studying cognition in artificial agents.

  14. Transformative leadership: an ethical stewardship model for healthcare.

    Science.gov (United States)

    Caldwell, Cam; Voelker, Carolyn; Dixon, Rolf D; LeJeune, Adena

    2008-01-01

    The need for effective leadership is a compelling priority for those who would choose to govern in public, private, and nonprofit organizations, and applies as much to the healthcare profession as it does to other sectors of the economy (Moody, Horton-Deutsch, & Pesut, 2007). Transformative Leadership, an approach to leadership and governance that incorporates the best characteristics of six other highly respected leadership models, is an integrative theory of ethical stewardship that can help healthcare professionals to more effectively achieve organizational efficiencies, build stakeholder commitment and trust, and create valuable synergies to transform and enrich today's healthcare systems (cf. Caldwell, LeJeune, & Dixon, 2007). The purpose of this article is to introduce the concept of Transformative Leadership and to explain how this model applies within a healthcare context. We define Transformative Leadership and identify its relationship to Transformational, Charismatic, Level 5, Principle-Centered, Servant, and Covenantal Leadership--providing examples of each of these elements of Transformative Leadership within a healthcare leadership context. We conclude by identifying contributions of this article to the healthcare leadership literature. PMID:18839754

  15. Modeling interface-controlled phase transformation kinetics in thin films

    Science.gov (United States)

    Pang, E. L.; Vo, N. Q.; Philippe, T.; Voorhees, P. W.

    2015-05-01

    The Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation is widely used to describe phase transformation kinetics. This description, however, is not valid in finite size domains, in particular, thin films. A new computational model incorporating the level-set method is employed to study phase evolution in thin film systems. For both homogeneous (bulk) and heterogeneous (surface) nucleation, nucleation density and film thickness were systematically adjusted to study finite-thickness effects on the Avrami exponent during the transformation process. Only site-saturated nucleation with isotropic interface-kinetics controlled growth is considered in this paper. We show that the observed Avrami exponent is not constant throughout the phase transformation process in thin films with a value that is not consistent with the dimensionality of the transformation. Finite-thickness effects are shown to result in reduced time-dependent Avrami exponents when bulk nucleation is present, but not necessarily when surface nucleation is present.

  16. Transformer real-time reliability model based on operating conditions

    Institute of Scientific and Technical Information of China (English)

    HE Jian; CHENG Lin; SUN Yuan-zhang

    2007-01-01

    Operational reliability evaluation theory reflects real-time reliability level of power system. The component failure rate varies with operating conditions. The impact of real-time operating conditions such as ambient temperature and transformer MVA (megavolt-ampere) loading on transformer insulation life is studied in this paper. The formula of transformer failure rate based on the winding hottest-spot temperature (HST) is given. Thus the real-time reliability model of transformer based on operating conditions is presented. The work is illustrated using the 1979 IEEE Reliability Test System. The changes of operating conditions are simulated by using hourly load curve and temperature curve, so the curves of real-time reliability indices are obtained by using operational reliability evaluation.

  17. Approaches Regarding Business Logic Modeling in Service Oriented Architecture

    Directory of Open Access Journals (Sweden)

    Alexandra Maria Ioana FLOREA

    2011-01-01

    Full Text Available As part of the Service Oriented Computing (SOC, Service Oriented Architecture (SOA is a technology that has been developing for almost a decade and during this time there have been published many studies, papers and surveys that are referring to the advantages of projects using it. In this article we discuss some ways of using SOA in the business environment, as a result of the need to reengineer the internal business processes with the scope of moving forward towards providing and using standardized services and achieving enterprise interoperability.

  18. Modeling mechanical effects on promotion and retardation of martensitic transformation

    Energy Technology Data Exchange (ETDEWEB)

    Maalekian, Mehran, E-mail: mehran.maalekian@ubc.ca [Department of Materials Engineering, University of British Columbia, 309-6350 Stores Road, Vancouver, B.C. V61Z4 (Canada); Kozeschnik, Ernst [Christian Doppler Laboratory for ' Early Stages of Precipitation' , Institute of Materials Science and Technology, Vienna University of Technology (Austria)

    2011-01-25

    Research highlights: {yields} Compressive elastic stresses up to 250 MPa are applied in continuous cooling. {yields} Using the thermodynamic data and maximum value of the mechanical driving force the predicted increase in M{sub s} ({approx}0.1 K/MPa) is in agreement with experiment {yields} Austenite was deformed plastically at different temperatures (800 deg. C-1100 deg. C). {yields} High deformation temperature (i.e. 1100 deg. C) as well as low plastic strain (i.e. {epsilon}{sub ave} {approx} 30%) do not affect martensite transformation noticeably, whereas lower deformation temperature (e.g. 900 deg. C) and large plastic strain (i.e. {epsilon}{sub ave} {approx} 70%) retards martensite transformation. {yields} The theory of mechanical stabilization predicts the depression of M{sub s}. - Abstract: The influence of compressive stress and prior plastic deformation of austenite on the martensite transformation in a eutectoid steel is studied both experimentally and theoretically. It is demonstrated that martensite formation is assisted by stress but it is retarded when transformation occurs from deformed austenite. With the quantitative modeling of the problem based on the theory of displacive shear transformation, the explanation of the two opposite roles of mechanical treatment prior to or simultaneously to martensite transformation is presented.

  19. MODEL TRANSFORMATION DEVELOPMENT USING MOLA MAPPINGS AND TEMPLATE MOLA

    OpenAIRE

    Kalniņa, Elīna

    2012-01-01

    Darbā pētīta modeļu transformāciju izstrāde 3 specializētos problēmu apgabalos: transformācijas modeļ-bāzētai izstrādei, transformācijas grafisku modelēšanas valodu rīku būvei un transformācijas, kas sintezē transformācijas. Secināts, ka valodā, kas pielāgota konkrētajam apgabalam, transformāciju izstrāde ir vienkāršāka un ātrāka. Visiem trim pētītajiem apgabaliem tika izstrādātas tiem pielāgotas valodas. Divas no izstrādātajām valodām balstās uz attēlojumu principiem. Abos gadījumos tika sec...

  20. Enterprise Architecture for Information System Analysis : Modeling and assessing data accuracy, availability, performance and application usage

    OpenAIRE

    Per, Närman

    2012-01-01

    Decisions concerning IT systems are often made without adequate decision-support. This has led to unnecessary IT costs and failures to realize business benefits. The present thesis presents a framework for analysis of four information systems properties relevant to IT decision-making. The work is founded on enterprise architecture, a model-based IT and business management discipline. Based on the existing ArchiMate framework, a new enterprise architecture framework has been developed and impl...

  1. Reverse-engineering of architectural buildings based on an hybrid modeling approach

    OpenAIRE

    De Luca, Livio; Veron, Philippe; Florenzano, Michel

    2006-01-01

    This article presents a set of theoretical reflections and technical demonstrations that constitute a new methodological base for the architectural surveying and representation using computer graphics techniques. The problem we treated relates to three distinct concerns: the surveying of architectural objects, the construction and the semantic enrichment of their geometrical models, and their handling for the extraction of dimensional information. A hybrid approach to 3D reconstruction is des...

  2. The role of technology and engineering models in transforming healthcare.

    Science.gov (United States)

    Pavel, Misha; Jimison, Holly Brugge; Wactlar, Howard D; Hayes, Tamara L; Barkis, Will; Skapik, Julia; Kaye, Jeffrey

    2013-01-01

    The healthcare system is in crisis due to challenges including escalating costs, the inconsistent provision of care, an aging population, and high burden of chronic disease related to health behaviors. Mitigating this crisis will require a major transformation of healthcare to be proactive, preventive, patient-centered, and evidence-based with a focus on improving quality-of-life. Information technology, networking, and biomedical engineering are likely to be essential in making this transformation possible with the help of advances, such as sensor technology, mobile computing, machine learning, etc. This paper has three themes: 1) motivation for a transformation of healthcare; 2) description of how information technology and engineering can support this transformation with the help of computational models; and 3) a technical overview of several research areas that illustrate the need for mathematical modeling approaches, ranging from sparse sampling to behavioral phenotyping and early detection. A key tenet of this paper concerns complementing prior work on patient-specific modeling and simulation by modeling neuropsychological, behavioral, and social phenomena. The resulting models, in combination with frequent or continuous measurements, are likely to be key components of health interventions to enhance health and wellbeing and the provision of healthcare. PMID:23549108

  3. Value Delivery Architecture Modeling – A New Approach for Business Modeling

    Directory of Open Access Journals (Sweden)

    Joachim Metzger

    2015-08-01

    Full Text Available Complexity and uncertainty have evolved as important challenges for entrepreneurship in many industries. Value Delivery Architecture Modeling (VDAM is a proposal for a new approach for business modeling to conquer these challenges. In addition to the creation of transparency and clarity, our approach supports the operationalization of business model ideas. VDAM is based on the combination of a new business modeling language called VDML, ontology building, and the implementation of a level of cross-company abstraction. The application of our new approach in the area of electric mobility in Germany, an industry sector with high levels of uncertainty and a lack of common understanding, shows several promising results: VDAM enables the development of an unambiguous and unbiased view on value creation. Additionally it allows for several applications leading to a more informed decision towards the implementation of new business models.

  4. Enterprise architecture evaluation using architecture framework and UML stereotypes

    Directory of Open Access Journals (Sweden)

    Narges Shahi

    2014-08-01

    Full Text Available There is an increasing need for enterprise architecture in numerous organizations with complicated systems with various processes. Support for information technology, organizational units whose elements maintain complex relationships increases. Enterprise architecture is so effective that its non-use in organizations is regarded as their institutional inability in efficient information technology management. The enterprise architecture process generally consists of three phases including strategic programing of information technology, enterprise architecture programing and enterprise architecture implementation. Each phase must be implemented sequentially and one single flaw in each phase may result in a flaw in the whole architecture and, consequently, in extra costs and time. If a model is mapped for the issue and then it is evaluated before enterprise architecture implementation in the second phase, the possible flaws in implementation process are prevented. In this study, the processes of enterprise architecture are illustrated through UML diagrams, and the architecture is evaluated in programming phase through transforming the UML diagrams to Petri nets. The results indicate that the high costs of the implementation phase will be reduced.

  5. Meta-model based modeling of military information system architecture%基于元模型的军事信息系统体系结构建模方法

    Institute of Scientific and Technical Information of China (English)

    谢文才; 罗雪山; 罗爱民

    2012-01-01

    为了实现不同体系结构框架方法论及体系结构工具下所开发体系结构的可理解、可比较、可交换,促进体系结构数据的共享和重用,提出了基于元模型的军事信息系统体系结构建模方法;以模型驱动体系结构(MDA)思想为基础,研究了体系结构元模型到支持体系结构建模语言的转换方法;设计了元模型规范下的体系结构建模的实现方法;以作战规则模型(OV - 6a)的IDEF0建模为例分析了转换方法所涉及核心规则的具体实现,说明了该方法的可行性和有效性.%In order to enhance the understanding, comparison and integration of architecture developed under different architecture frameworks and tools, and to promote the sharing and reuse of architecture data, a new method, named meta-model based methodology of architecture modeling, was proposed. Based on the idea of model driven architecture ( MDA) , this method presented a transformation approach from architecture meta-model to modeling languages with the extensible markup language (XML) format. On the other hand, the modeling method under the meta-model specification was proposed and three mapping specifications mentioned in the method were designed. To verify its feasibility, the IDEF3-based modeling methods of operation rule model was designed, and the main rule-named modeling primitives and patterns based transformation was analyzed.

  6. Performance evaluation of enterprise architecture with a formal fuzzy model (FPN

    Directory of Open Access Journals (Sweden)

    Ashkan Marahel

    2012-10-01

    Full Text Available Preparing enterprise architecture is complicated procedure, which uses framework as structure regularity and style as the behavior director for controlling complexity. As in architecture behavior, precedence over structure, for better diagnosis of a behavior than other behaviors, there is a need to evaluate the architecture performance. Enterprise architecture cannot be organized without the benefit of the logical structure. Framework provides a logical structure for classifying architectural output. Among the common architectural framework, the C4ISR is one of the most appropriate frameworks because of the methodology of its production and the level of aggregation capability and minor revisions. C4ISR framework, in three views and by using some documents called product, describes the architecture. In this paper, for developing the systems, there are always uncertainties in information systems and we may use new version of UML called FUZZY-UML, which includes structure and behavior of the system. The proposed model of this paper also uses Fuzzy Petri nets to analyze the developed system.

  7. Modeling of a 3DTV service in the software-defined networking architecture

    Science.gov (United States)

    Wilczewski, Grzegorz

    2014-11-01

    In this article a newly developed concept towards modeling of a multimedia service offering stereoscopic motion imagery is presented. Proposed model is based on the approach of utilization of Software-defined Networking or Software Defined Networks architecture (SDN). The definition of 3D television service spanning SDN concept is identified, exposing basic characteristic of a 3DTV service in a modern networking organization layout. Furthermore, exemplary functionalities of the proposed 3DTV model are depicted. It is indicated that modeling of a 3DTV service in the Software-defined Networking architecture leads to multiplicity of improvements, especially towards flexibility of a service supporting heterogeneity of end user devices.

  8. A Unified Formal Model for Service Oriented Architecture to Enforce Security Contracts

    OpenAIRE

    Allam, Diana

    2012-01-01

    Poster- AOSD 2012 (Aspect-Oriented Software Development) Student Research Competition International audience In this paper we introduce a model as a foundation for heterogeneous services, therefore unifying web services technologies in SOA (Service Oriented Architecture), specifically, SOAP/WS* and RESTful models. This model abstracts away from service implementations, in order to verify and to enforce some important security properties.

  9. A Multilayered Model for Artificial Intelligence of Game Character as Agent Architecture

    OpenAIRE

    Miyake, Youichiro; Miyake, Yoichiro

    2015-01-01

    As all mathematics have a beautiful structure, an inner mind model of Artificial Intelligence has a grand architecture. It consists of information flow and software modules. In this twenty years, an agent's inner intelligence model has been researched and developed by many game AI programmers in game titles. A whole image of an agent's intelligent model is explained.

  10. Plasticity induced by phase transformation in steel: experiment vs modeling

    International Nuclear Information System (INIS)

    The objectives of this work are: (i) understand the mechanisms and phenomena involved in the plasticity of steels in the presence of a diffusive or martensitic phase transformation. (ii) develop tools for predicting TRIP, which are able to correctly reproduce the macroscopic deformation for cases of complex loading and could also provide information about local elasto-visco-plastic interactions between product and parent phases. To this purpose, new experimental tests are conducted on 35NCD16 steel for austenite to martensite transformation and on 100C6 steel for austenite to pearlite transformation. The elasto viscoplastic properties of austenite and pearlite of the 100C6 steel are characterized through tension compression and relaxation tests. The parameters of macro-homogeneous and crystal-based constitutive laws could then be identified such as to analyse different models with respect to the experimental TRIP: the analytical models of Leblond (1989) and Taleb and Sidoroff (2003) but also, above all, different numerical models which can be distinguished by the prevailing assumptions concerning the local kinetics and the constitutive laws. An extension of the single-grain model dedicated to martensitic transformations developed during the thesis of S. Meftah (2007) is proposed. It consists in introducing the polycrystalline character of the austenite through a process of homogenization based on a self-consistent scheme by calculating the properties of an Equivalent Homogeneous Medium environment (EHM). (author)

  11. To transform or not to transform: Using Generalized Linear Mixed Models to analyse reaction time data

    Directory of Open Access Journals (Sweden)

    Steson eLo

    2015-08-01

    Full Text Available Linear mixed-effect models (LMMs are being increasingly widely used in psychology to analyse multi-level research designs. This feature allows LMMs to address some of the problems identified by Speelman and McGann (2013 about the use of mean data, because they do not average across individual responses. However, recent guidelines for using LMM to analyse skewed reaction time (RT data collected in many cognitive psychological studies recommend the application of non-linear transformations to satisfy assumptions of normality. Uncritical adoption of this recommendation has important theoretical implications which can yield misleading conclusions. For example, Balota, Aschenbrenner and Yap (2013 showed that analyses of raw RT produced additive effects of word frequency and stimulus quality on word identification, which conflicted with the interactive effects observed in analyses of transformed RT. Generalized linear mixed-effect models (GLMM provide a solution to this problem by satisfying normality assumptions without the need for transformation. This allows differences between individuals to be properly assessed, using the metric most appropriate to the researcher’s theoretical context. We outline the major theoretical decisions involved in specifying a GLMM, and illustrate them by reanalysing Balota et al.’s datasets. We then consider the broader benefits of using GLMM to investigate individual differences.

  12. Software architecture and design of the web services facilitating climate model diagnostic analysis

    Science.gov (United States)

    Pan, L.; Lee, S.; Zhang, J.; Tang, B.; Zhai, C.; Jiang, J. H.; Wang, W.; Bao, Q.; Qi, M.; Kubar, T. L.; Teixeira, J.

    2015-12-01

    Climate model diagnostic analysis is a computationally- and data-intensive task because it involves multiple numerical model outputs and satellite observation data that can both be high resolution. We have built an online tool that facilitates this process. The tool is called Climate Model Diagnostic Analyzer (CMDA). It employs the web service technology and provides a web-based user interface. The benefits of these choices include: (1) No installation of any software other than a browser, hence it is platform compatable; (2) Co-location of computation and big data on the server side, and small results and plots to be downloaded on the client side, hence high data efficiency; (3) multi-threaded implementation to achieve parallel performance on multi-core servers; and (4) cloud deployment so each user has a dedicated virtual machine. In this presentation, we will focus on the computer science aspects of this tool, namely the architectural design, the infrastructure of the web services, the implementation of the web-based user interface, the mechanism of provenance collection, the approach to virtualization, and the Amazon Cloud deployment. As an example, We will describe our methodology to transform an existing science application code into a web service using a Python wrapper interface and Python web service frameworks (i.e., Flask, Gunicorn, and Tornado). Another example is the use of Docker, a light-weight virtualization container, to distribute and deploy CMDA onto an Amazon EC2 instance. Our tool of CMDA has been successfully used in the 2014 Summer School hosted by the JPL Center for Climate Science. Students had positive feedbacks in general and we will report their comments. An enhanced version of CMDA with several new features, some requested by the 2014 students, will be used in the 2015 Summer School soon.

  13. Analysis of service-oriented architecture maturity model integration (SOMMMI)

    OpenAIRE

    HERAND, Deniz

    2014-01-01

       Market   requirements   force   to   change   the   software   systems.   Service   Oriented  Architecture   (SOA)   concept   aims   to   decrease   this   change   effect.   Therefore   SOA  includes  so  many  principles.  These  principles  are  about  the  main  points  which  show  how   to   develop   the   services.   Being   talked   about   principles   target   to   decrease   the  change  effect,  but  to  implement  is  harder  in  practical  phase  more  than  in  theoretical...

  14. Model Driven Development of Simulation Models: Defining and Transforming Conceptual Models into Simulation Models by Using Metamodels and Model Transformations

    NARCIS (Netherlands)

    Küçükkeçeci Çetinkaya, D.

    2013-01-01

    Modeling and simulation (M&S) is an effective method for analyzing and designing systems and it is of interest to scientists and engineers from all disciplines. This thesis proposes the application of a model driven software development approach throughout the whole set of M&S activities and it prop

  15. SPICE Mutator Model for Transforming Memristor into Meminductor

    Directory of Open Access Journals (Sweden)

    Hui Wang

    2013-01-01

    Full Text Available The memristor (resistor with memory, as the fourth fundamental circuit element, is a nonvolatile nanoelectronic device and holds great promise for VLSI applications. It was suggested that the meminductor (ML, inductor with memory circuit can be built by memristor emulators. This paper further addresses the transformation mechanism in terms of constitutive relation from the memristor to the meminductor and then designs an MR-ML mutator to achieve MR-ML transformation. We also present the mutator’s SPICE model and analyze the simulation results.

  16. Design of a Secure Smart Grid Architecture Model using Damgard Jurik Cryptosystem

    Directory of Open Access Journals (Sweden)

    K. Seethal

    2015-04-01

    Full Text Available Smart grid is a paradigm shift from the traditional Power grid which promises to make the electric grid both energy efficient and Fault tolerant. Trade-off between Energy savings and Security is a critical issue in Smart grid architecture. Smart grid architecture requires a high level secure data exchanges between sensors like Phasor Measurement Units and Advanced Metering Infrastructures like Smart Meters. In this study a Secure Smart grid Architecture model is proposed for the Smart grid network. Initially DamgardJurik encryption algorithm is applied on the data from the Phasor Measurement Units and a digital signature is then attached to the encrypted text to provide further authentication. The digitally signed data is collected in Data centre where it is decrypted. The proposed architecture has been implemented in both software and hardware. The effectiveness of the system is verified by introducing an intruder in hardware implementation.

  17. Modeling, analysis and optimization of network-on-chip communication architectures

    CERN Document Server

    Ogras, Umit Y

    2013-01-01

    Traditionally, design space exploration for Systems-on-Chip (SoCs) has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip and their performance continue to increase, the communication architecture plays a major role in the area, performance and energy consumption of the overall system. As a result, a shift from computation-based to communication-based design becomes mandatory. Towards this end, network-on-chip (NoC) communication architectures have emerged recently as a promising alternative to classical bus and point-to-point communication architectures. This book explores outstanding research problems related to modeling, analysis and optimization of NoC communication architectures. More precisely, we present novel design methodologies, software tools and FPGA prototypes to aid the design of application-specific NoCs.

  18. Software Architecture for Modeling and Simulation of Underwater Acoustic Information Systems

    Institute of Scientific and Technical Information of China (English)

    WANG Xi-min; CAI Zhi-ming

    2009-01-01

    The simulation of underwater acoustic information flow is an important way to research sonar performance and its engagement effectiveness in the ocean environment. This paper analyzes the significance of modeling an open and sophisticated simulation software architecture by object-oriented method, and introduces the modeling processes and expression method of simulation architecture. According to the requirements of simulation system and the underwater acoustic information flow, the logical architecture of simulation software system is modeled by the object-oriented method. A use-case view captured the system requirements. The logical view shows the logical architecture of software system. The simulation software is decomposed into the loose coupling constituent parts by layering and partitioning the packages for maintainability. The design patterns enabled the simulation software to have good expansibility and reusability. The simulation system involving multi-targets and multi-sonar is developed based on the architecture model. Practices show that the model meets the needs for simulating an open and sophisticated system.

  19. An executable software architecture model for response time and reliability assessment

    Directory of Open Access Journals (Sweden)

    Zahra Norouzi

    2014-09-01

    Full Text Available With the increasing use of the Unified Modeling Language (UML diagrams to describe the software’s architecture and the importance of evaluating nonfunctional requirements at the level of software architecture, creating an executable model from these diagrams is essential. On the other hand, the UML diagrams do not directly provide features to evaluate nonfunctional system requirements. Thus, these capabilities can be added to UML diagrams by applying efficiency and reliability stereotypes. Because the techniques used in the UML is able to deal with certain matters, we develop uncertain UML, stereotypes and tags. In this paper, the architecture of a software system is described by using use case diagram, sequence and deployment of unified modeling language diagrams with annotations fuzzy stereotypes related to response time and reliability. The proposed method for calculating the response time and reliability based on fuzzy rules are introduced, and the algorithm is implemented for an executable model based on colored fuzzy Petri net.

  20. Mobility and transformability in architectural structures : proposal of a transformable system of telescopic and x-articulated bars: cinematic, geometric and structural analysis

    OpenAIRE

    Balaguer Sala, Marta; Sastre Sastre, Ramon

    2013-01-01

    Systems of bars in x with intermediate hinge, also called SLE (scissor like elements), are suitable for the adaptability approach from the perspective of structural mobility. They are the starting point for new solutions: transformable M-SLE. It has been proved possible to obtain different formal alternatives with a single structural solution, by making modifications to add a DOF (degree of freedom) to the SLE base unit. In this research a new transformable typology is studied: telescopic ...

  1. Laguerre-Volterra model and architecture for MIMO system identification and output prediction.

    Science.gov (United States)

    Li, Will X Y; Xin, Yao; Chan, Rosa H M; Song, Dong; Berger, Theodore W; Cheung, Ray C C

    2014-01-01

    A generalized mathematical model is proposed for behaviors prediction of biological causal systems with multiple inputs and multiple outputs (MIMO). The system properties are represented by a set of model parameters, which can be derived with random input stimuli probing it. The system calculates predicted outputs based on the estimated parameters and its novel inputs. An efficient hardware architecture is established for this mathematical model and its circuitry has been implemented using the field-programmable gate arrays (FPGAs). This architecture is scalable and its functionality has been validated by using experimental data gathered from real-world measurement. PMID:25571001

  2. Combination of Thermal Subsystems Modelled by Rapid Circuit Transformation

    CERN Document Server

    Gerstenmaier, Y C; Wachutka, G

    2008-01-01

    This paper will deal with the modeling-problem of combining thermal subsystems (e.g. a semiconductor module or package with a cooling radiator) making use of reduced models. The subsystem models consist of a set of Foster-type thermal equivalent circuits, which are only behavioral models. A fast al-gorithm is presented for transforming the Foster-type circuits in Cauer-circuits which have physical behavior and therefore allow for the construction of the thermal model of the complete system. Then the set of Cauer-circuits for the complete system is transformed back into Foster-circuits to give a simple mathematical representation and applicability. The transfor-mation algorithms are derived in concise form by use of recur-sive relations. The method is exemplified by modeling and measurements on a single chip IGBT package mounted on a closed water cooled radiator. The thermal impedance of the complete system is constructed from the impedances of the sub-systems, IGBT-package and radiator, and also the impedance...

  3. Generating native user interfaces for multiple devices by means of model transformation

    Institute of Scientific and Technical Information of China (English)

    Ignacio MARIN; Francisco ORTIN; German PEDROSA; Javier RODRIGUEZ

    2015-01-01

    In the last years, the types of devices used to access information systems have notably increased using different operating systems, screen sizes, interaction mechanisms, and software features. This device fragmentation is an important issue to tackle when developing native mobile service front-end applications. To address this issue, we propose the generation of native user interfaces (UIs) by means of model transformations, following the model-based user interface (MBUI) paradigm. The resulting MBUI framework, called LIZARD, generates applications for multiple target platforms. LIZARD allows the defi nition of applications at a high level of abstraction, and applies model transformations to generate the target native UI considering the specifi c features of target platforms. The generated applications follow the UI design guidelines and the architectural and design patterns specifi ed by the corresponding operating system manufacturer. The objective is not to generate generic applications following the lowest-common-denominator approach, but to follow the particular guidelines specifi ed for each target device. We present an example application modeled in LIZARD, generating different UIs for Windows Phone and two types of Android devices (smartphones and tablets).

  4. A third generation object-oriented process model:roles and architectures in focus

    OpenAIRE

    Kivistö, K

    2000-01-01

    Abstract This thesis examines and evaluates the Object-Oriented Client/Server (OOCS) model, a process model that can be used when IT organizations develop object-oriented client/server applications. In particular, it defines the roles in the development team and combines them into the process model. Furthermore, the model focuses on the client/server architecture, considering it explicitly. The model has been under construction for several years and it has been test...

  5. The Modeling Strategies for Open Software Architecture of Robot Controller

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Although the modeling technologies for open robot controllers have been discussed widely, not much literature is devoted to the actual general modeling principles and strategies. The reason is that many researches focus on specific application fields. This paper accommodates for this lacuna and provides some general modeling principles and strategies. At last, the actual new modeling method -Hierarchical Object-Oriented Petri net (HOONet) which has been proved to be an effective modeling methodology, is used to illustrate the modeling strategies.

  6. Formal Model for Restructuring of Object-Oriented Frameworks to Architecture Model-View-Adapter

    Directory of Open Access Journals (Sweden)

    Santaolaya-Salgado René

    2014-04-01

    Full Text Available The restructuring of legacy code can be done for different purposes, among which is the migration to new technologies that facilitate the maintenance and code reuse. The frameworks have features that, in some way, limit the reuse of your code. In this paper, we propose a formal model that describes a process of restructuring legacy code object-orientedframeworks (MOO to code according to the architecture Model-View-Adapter (MVA. This process is carried out using 11 methods of restructuring, with the aim of separating the code from business logic (the model, which is the most reusable framework, the code that implements the view and the code that handles specific processing of the application. As a result, the legacy code of the framework is ready for a subsequent migration to Web services.

  7. High frequency modeling of power transformers. Stresses and diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Bjerkan, Eilert

    2005-05-15

    In this thesis a reliable, versatile and rigorous method for high frequency power transformer modeling is searched and established. The purpose is to apply this model to sensitivity analysis of FRA (Frequency Response Analysis) which is a quite new diagnostic method for assessing the mechanical integrity of power transformer windings on-site. The method should be versatile in terms of being able to estimate internal and external over voltages and resonances. Another important aspect is that the method chosen is suitable for real transformer geometries. In order to verify the suitability of the model for real transformers, a specific test-object is used. This is a 20MVA transformer, and details are given in chapter 1.4. The high frequency power transformer model is established from geometrical and constructional information from the manufacturer, together with available material characteristics. All circuit parameters in the lumped circuit representation are calculated based on these data. No empirical modifications need to be performed. Comparison shows capability of reasonable accuracy in the range from 10 khz to 1 MHz utilizing a disc-to-disc representation. A compromise between accuracy of model due to discretization and complexity of the model in a turn-to-turn representation is inevitable. The importance of the iron core is emphasized through a comparison of representations with/without the core included. Frequency-dependent phenomena are accurately represented using an isotropic equivalent for windings and core, even with a coarse mesh for the FEM-model. This is achieved through a frequency-dependent complex permeability representation of the materials. This permeability is deduced from an analytical solution of the frequency-dependent magnetic field inside the conductors and the core. The importance of dielectric losses in a transformer model is also assessed. Since published data on the high frequency properties of press board are limited, some initial

  8. Transforming High School Physics with Modeling and Computation

    CERN Document Server

    Aiken, John M

    2013-01-01

    The Engage to Excel (PCAST) report, the National Research Council's Framework for K-12 Science Education, and the Next Generation Science Standards all call for transforming the physics classroom into an environment that teaches students real scientific practices. This work describes the early stages of one such attempt to transform a high school physics classroom. Specifically, a series of model-building and computational modeling exercises were piloted in a ninth grade Physics First classroom. Student use of computation was assessed using a proctored programming assignment, where the students produced and discussed a computational model of a baseball in motion via a high-level programming environment (VPython). Student views on computation and its link to mechanics was assessed with a written essay and a series of think-aloud interviews. This pilot study shows computation's ability for connecting scientific practice to the high school science classroom.

  9. Software architecture

    CERN Document Server

    Vogel, Oliver; Chughtai, Arif

    2011-01-01

    As a software architect you work in a wide-ranging and dynamic environment. You have to understand the needs of your customer, design architectures that satisfy both functional and non-functional requirements, and lead development teams in implementing the architecture. And it is an environment that is constantly changing: trends such as cloud computing, service orientation, and model-driven procedures open up new architectural possibilities. This book will help you to develop a holistic architectural awareness and knowledge base that extends beyond concrete methods, techniques, and technologi

  10. Visual product architecture modelling for structuring data in a PLM system

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    2012-01-01

    in a company to support the development of a family of products, as well as the reasons leading to the use of the specific model and its terminology. The fundamental idea for using the architecture model is that an improved understanding of the whole product system, will lead to better decision...

  11. An Experiment in Model Driven Architecture for e-Enterprise Systems

    OpenAIRE

    Smith, Robert P.; Kent, Stuart

    2002-01-01

    OMG's Model Driven Architecture demonstrates how a system's specification model can be used within the process of creating supporting software implementations. This article documents the findings of an experiment aimed at determining the extent to which this method of software engineering can be used within the domain of e-Enterprise systems.

  12. An evaluation of the software architecture efficiency using the Clichés and behavioral diagrams pertaining to the unified modeling language

    OpenAIRE

    Siamak Khaksar Haghani; Yousef Abbasnejad; Ali Harounabadi

    2014-01-01

    The software architecture plays essential role for the development of the complicated software systems and it is important to evaluate the software architecture efficiency. One way to evaluate the software architecture is to create an executable model from the architecture. Unified Modeling Language (UML) diagrams are used to describe the software architecture. UML has made it easy to use and to evaluate the necessary requirements at the software architecture level. It creates an executable m...

  13. Mathematical model for transformer winding to diagnose radial deformation

    International Nuclear Information System (INIS)

    The application of the transfer function is discussed at present as a method for on-site monitoring and diagnoses of power transformers with regard to mechanical damages of the winding. In order to be able to evaluate the measurements, the correlation between the characteristics of transfer functions and possible damages must be know. Radial deformation of transformer windings have been studied experimental and theoretical. The primary winding of the test transformer has 30 double disk coils (1.2 MV A, 10 kV) and the secondary is a one layer winding with 23 turns (1.2 MV A, 400 V). A detailed mathematical model were developed for the test object and a comparison between measured and calculated results was carried out. A numerical method for the calculation of inductances is suggested, which is independent of the shape of the windings' turns. For the calculation of the earth capacitances or coupled capacitances a relationship is given. An independent simulation confirmed the accuracy of this relationship by using finite elements method. it is shown that the developed model can represent the behavior of transformer windings in the frequency domain in case of sound and deformed conditions

  14. Cultural heritage conservation and communication by digital modeling tools. Case studies: minor architectures of the Thirties in the Turin area

    Science.gov (United States)

    Bruno, A., Jr.; Spallone, R.

    2015-08-01

    Between the end of the twenties and the beginning of the World war two Turin, as the most of the Italian cities, was endowed by the fascist regime of many new buildings to guarantee its visibility and to control the territory: the fascist party main houses and the local ones. The style that was adopted for these constructions was inspired by the guide lines of the Modern movement which were spreading by a generation of architects as Le Corbusier, Gropius, Mendelsohn. At the end of the war many buildings were reconverted to several functions that led heavy transformations not respectful of the original worth, other were demolished. Today it's possible to rebuild those lost architectures in their primal format as it was created by their architects on paper (and in their mind). This process can guarantee the three-dimensional perception, the authenticity of the materials and the placement into the Turin urban tissue, using static and dynamic digital representation systems. The "three-dimensional re-drawing" of the projects, thought as an heuristic practice devoted to reveal the original idea of the project, inserts itself in a digital model of the urban and natural context as we can live it today, to simulate the perceptive effects that the building could stir up today. The modeling skills are the basis to product videos able to explore the relationship between the environment and "re-built architectures", describing with the synthetic movie techniques, the main formal and perceptive roots. The model represents a scientific product that can be involved in a virtual archive of cultural goods to preserve the collective memory of the architectural and urban past image of Turin.

  15. THREE-PHASE TRANSFORMER PARAMETERS CALCULATION CONSIDERING THE CORE SATURATION FOR THE MATLAB-SIMULINK TRANSFORMER MODEL

    OpenAIRE

    I. V. Novash; Yu. V. Rumiantsev

    2015-01-01

    This article describes the parameters calculation for the three-phase two-winding power transformer model taken from the SimPowerSystems library, which is the part of the MatLab- Simulink environment. Presented methodology is based on the power transformer nameplate data usage. Particular attention is paid to the power transformer magnetization curve para- meters  calculation.  The  methodology  of  the  three-phase  two-winding  power  transformer model parameters calculation considering the...

  16. Algorithm To Architecture Mapping Model (ATAMM) multicomputer operating system functional specification

    Science.gov (United States)

    Mielke, R.; Stoughton, J.; Som, S.; Obando, R.; Malekpour, M.; Mandala, B.

    1990-01-01

    A functional description of the ATAMM Multicomputer Operating System is presented. ATAMM (Algorithm to Architecture Mapping Model) is a marked graph model which describes the implementation of large grained, decomposed algorithms on data flow architectures. AMOS, the ATAMM Multicomputer Operating System, is an operating system which implements the ATAMM rules. A first generation version of AMOS which was developed for the Advanced Development Module (ADM) is described. A second generation version of AMOS being developed for the Generic VHSIC Spaceborne Computer (GVSC) is also presented.

  17. Model-driven Architecture of a Maritime Surveillance System Simulator

    OpenAIRE

    Monperrus, Martin; Long, Benoit; Champeau, Joël; Hoeltzener, Brigitte; Marchalot, Gabriel; Jézéquel, Jean-Marc

    2010-01-01

    This article reports on an experiment to apply a model-driven approach for systems engineering in an industrial context. This experiment consisted of setting up a model-driven simulation environment for a maritime surveillance system. The simulation is fully based on three models, each conforming to a specic metamodel. We discuss the main advances given by model-driven orientated simulation for systems engineering.

  18. From Business Model to System Architecture Considering Goals, Aspects and Quality Standards

    Directory of Open Access Journals (Sweden)

    Jean Carlos Guzmán

    2013-12-01

    Full Text Available At present business models have been converted into strategic assets for enterprise organizations. They facilitate information management for decisions making, transactions between parties and optimized services. The goal of this work is to present an Architectural Design Process (DAOMAC integrating Goals, Aspects and Quality Standards techniques and practices, to obtain an Initial Architecture for the software system from the business model. The main contribution of this work is to consider explicitly non-functional requirements in the different abstraction levels involved in the process to obtain the initial architecture model, and guaranteeing their traceability: tasks originating non-functional goals in the business model where they are not explicitly considered, non-functional crosscutting goals in the goal model, crosscutting concerns treated as softgoals and operationalizations in the SIG (Softgoal Interdependency Graph model. The main artifact obtained is the initial architecture and its logical view can be appreciated in the DAOMAC application to the case study, an administrative service process of the Citizen Identification and Registration System. Another important contribution is the specification of non-functional requirements by the ISO/IEC 25010 standard to facilitate their traceability and the communication among work groups.

  19. Evaluation of a server-client architecture for accelerator modeling and simulation

    International Nuclear Information System (INIS)

    Traditional approaches to computational modeling and simulation often utilize a batch method for code execution using file-formatted input/output. This method of code implementation was generally chosen for several factors, including CPU throughput and availability, complexity of the required modeling problem, and presentation of computation results. With the advent of faster computer hardware and the advances in networking and software techniques, other program architectures for accelerator modeling have recently been employed. Jefferson Laboratory has implemented a client/server solution for accelerator beam transport modeling utilizing a query-based I/O. The goal of this code is to provide modeling information for control system applications and to serve as a computation engine for general modeling tasks, such as machine studies. This paper performs a comparison between the batch execution and server/client architectures, focusing on design and implementation issues, performance, and general utility towards accelerator modeling demands

  20. Evaluation of a server-client architecture for accelerator modeling and simulation

    International Nuclear Information System (INIS)

    Traditional approaches to computational modeling and simulation often utilize a batch method for code execution using file-formatted input/output. This method of code implementation was generally chosen for several factors, including CPU throughput and availability, complexity of the required modeling problem, and presentation of computation results. With the advent of faster computer hardware and the advances in networking and software techniques, other program architectures for accelerator modeling have recently been employed. Jefferson Laboratory has implemented a client/server solution for accelerator beam transport modeling utilizing a query-based I/O. The goal of this code is to provide modeling information for control system applications and to serve as a computation engine for general modeling tasks, such as machine studies. This paper performs a comparison between the batch execution and server/client architectures, focusing on design and implementation issues, performance, and general utility towards accelerator modeling demands. copyright 1997 American Institute of Physics

  1. Deferred Action: Theoretical model of process architecture design for emergent business processes

    Directory of Open Access Journals (Sweden)

    Patel, N.V.

    2007-01-01

    Full Text Available E-Business modelling and ebusiness systems development assumes fixed company resources, structures, and business processes. Empirical and theoretical evidence suggests that company resources and structures are emergent rather than fixed. Planning business activity in emergent contexts requires flexible ebusiness models based on better management theories and models . This paper builds and proposes a theoretical model of ebusiness systems capable of catering for emergent factors that affect business processes. Drawing on development of theories of the ‘action and design’class the Theory of Deferred Action is invoked as the base theory for the theoretical model. A theoretical model of flexible process architecture is presented by identifying its core components and their relationships, and then illustrated with exemplar flexible process architectures capable of responding to emergent factors. Managerial implications of the model are considered and the model’s generic applicability is discussed.

  2. Fast tracking ICT infrastructure requirements and design, based on Enterprise Reference Architecture and matching Reference Models

    DEFF Research Database (Denmark)

    Bernus, Peter; Baltrusch, Rob; Vesterager, Johan; Tølle, Martin

    2002-01-01

    The Globemen Consortium has developed the virtual enterprise reference architecture and methodology (VERAM), based on GERAM and developed reference models for virtual enterprise management and joint mission delivery. The planned virtual enterprise capability includes the areas of sales and...... marketing, global engineering, and customer relationship management. The reference models are the basis for the development of ICT infrastructure requirements. These in turn can be used for ICT infrastructure specification (sometimes referred to as 'ICT architecture').Part of the ICT architecture is...... industry-wide, part of it is industry-specific and a part is specific to the domains of the joint activity that characterises the given Virtual Enterprise Network at hand. The article advocates a step by step approach to building virtual enterprise capability....

  3. Multimodal electromechanical model of piezoelectric transformers by Hamilton's principle

    OpenAIRE

    Nadal, Clément; Pigache, François

    2009-01-01

    This work deals with a general energetic approach to establish an accurate electromechanical model of a piezoelectric transformer (PT). Hamilton’s principle is used to obtain the equations of motion for free vibrations. The modal characteristics (mass, stiffness, primary and secondary electromechanical conversion factors) are also deduced. Then, to illustrate this general electromechanical method, the variational principle is applied to both homogeneous and nonhomogeneous Rosen-type PT mode...

  4. Unitary transformation method for solving generalized Jaynes-Cummings models

    Indian Academy of Sciences (India)

    Sudha Singh

    2006-03-01

    Two fully quantized generalized Jaynes-Cummings models for the interaction of a two-level atom with radiation field are treated, one involving intensity dependent coupling and the other involving multiphoton interaction between the field and the atom. The unitary transformation method presented here not only solves the time dependent problem but also allows a determination of the eigensolutions of the interacting Hamiltonian at the same time.

  5. A transformation model for Laminaria Japonica (Phaeophyta, Laminariales)

    Science.gov (United States)

    Qin, Song; Jiang, Peng; Li, Xin-Ping; Wang, Xi-Hua; Zeng, Cheng-Kui

    1998-03-01

    A genetic transformation model for the seaweed Laminaria japonica mainly includes the following aspects: 1. The method to introduce foreign genes into the kelp, L. japonica Biolistic bombardment has been proved to be an effective method to bombard foreign DNA through cell walls into intact cells of both sporophytes and gametophytes. The expression of cat and lacZ was detected in regenerated sporophytes, which suggests that this method could induce random integration of foreign genes. Promoters to drive gene expression

  6. Persistent Homology Transform for Modeling Shapes and Surfaces

    OpenAIRE

    Turner, Katharine; Mukherjee, Sayan; Doug M Boyer

    2013-01-01

    In this paper we introduce a statistic, the persistent homology transform (PHT), to model surfaces in $\\mathbb{R}^3$ and shapes in $\\mathbb{R}^2$. This statistic is a collection of persistence diagrams - multiscale topological summaries used extensively in topological data analysis. We use the PHT to represent shapes and execute operations such as computing distances between shapes or classifying shapes. We prove the map from the space of simplicial complexes in $\\mathbb{R}^3$ into the space ...

  7. NECESSITY OF TUTOR TRAINING IN ARCHITECTURE EDUCATION USING RASCH MEASUREMENT MODEL

    Directory of Open Access Journals (Sweden)

    BadiossadatHassanpour

    2012-01-01

    Full Text Available This is an unwritten norm that says learning can take place in the job. But learning in tutors’ position in the meaning of gaining experience is good but in case of try and error would be crucial. On the other hand there is a belief among practitioners that they assume that who has some experience in architecture is fully equipped for teaching. Since education of art and architecture are sophisticated and they are completely based on tutor and students, tutors and instructors should fully prepare for this position. There are many holistic problems statements and suggestions, but there were no measurement tool to monitor this problem and some executive suggestions. This research for the first time used Rasch momeasurment model and Mini Facet sofware to evaluate tutors’ performance in architecture school. As case study second year design studio of Universiti Kebangsaan Malaysia and final submission have chosen which 4 tutur were part of evaluation. The modeling demonstrates this claim that young tutors with less experience and part time academics needs to be have some formal training to gain experience. Graduations from architecture degree or having practical experiences separately are not enough to make one a studio masters. This study also will present some recommendations on some learning workshops and supportive workshops to prepare creative architecture tutors.

  8. A Reduced High Frequency Transformer Model To Detect The Partial Discharge Locations

    Directory of Open Access Journals (Sweden)

    El-Sayed M. El-Refaie

    2014-03-01

    Full Text Available Transformer modeling is the first step in improving partial discharge localization techniques. Different transformer models were used for such purpose. This paper presents a reduced transformer model that can be accurately used for the purpose of partial discharge localization. The model is investigated in alternative transient program (ATP draw for partial discharge localization application. A comparison between different transformer models is studied, the achieved results of the reduced model demonstrated high efficiency.

  9. THREE-PHASE TRANSFORMER PARAMETERS CALCULATION CONSIDERING THE CORE SATURATION FOR THE MATLAB-SIMULINK TRANSFORMER MODEL

    Directory of Open Access Journals (Sweden)

    I. V. Novash

    2015-01-01

    Full Text Available This article describes the parameters calculation for the three-phase two-winding power transformer model taken from the SimPowerSystems library, which is the part of the MatLab- Simulink environment. Presented methodology is based on the power transformer nameplate data usage. Particular attention is paid to the power transformer magnetization curve para- meters  calculation.  The  methodology  of  the  three-phase  two-winding  power  transformer model parameters calculation considering the magnetization curve nonlinearity isn’t presented in Russian-and English-language sources. Power transformers demo models described in the SimPowerSystems user’s guide have already calculated parameters, but without reference to the sources of their determination. A power transformer is a nonlinear element of the power system, that’s why for its performance analysis in different modes of operation is necessary to have the magnetization curve parameters.The process analysis during no-load energizing of the power transformer is of special interest. This regime is accompanied by the inrush current on the supply side of the power transformer, which is several times larger than the transformer rated current. Sharp rising of the magnetizing current is explained by the magnetic core saturation. Therefore, magnetiza- tion characteristic accounting during transformer no-load energizing modeling is a mandatory requirement. Article authors attempt to put all calculating formulas in a more convenient form and validate the power transformer nonlinear magnetization characteristics parameters calcu- lation. Inrush current oscillograms obtained during the simulation experiment confirmed the adequacy of the calculated model parameters.

  10. Transforming 2d Cadastral Data Into a Dynamic Smart 3d Model

    Science.gov (United States)

    Tsiliakou, E.; Labropoulos, T.; Dimopoulou, E.

    2013-08-01

    3D property registration has become an imperative need in order to optimally reflect all complex cases of the multilayer reality of property rights and restrictions, revealing their vertical component. This paper refers to the potentials and multiple applications of 3D cadastral systems and explores the current state-of-the art, especially the available software with which 3D visualization can be achieved. Within this context, the Hellenic Cadastre's current state is investigated, in particular its data modeling frame. Presenting the methodologies and specifications addressing the registration of 3D properties, the operating cadastral system's shortcomings and merits are pointed out. Nonetheless, current technological advances as well as the availability of sophisticated software packages (proprietary or open source) call for 3D modeling. In order to register and visualize the complex reality in 3D, Esri's CityEngine modeling software has been used, which is specialized in the generation of 3D urban environments, transforming 2D GIS Data into Smart 3D City Models. The application of the 3D model concerns the Campus of the National Technical University of Athens, in which a complex ownership status is established along with approved special zoning regulations. The 3D model was built using different parameters based on input data, derived from cadastral and urban planning datasets, as well as legal documents and architectural plans. The process resulted in a final 3D model, optimally describing the cadastral situation and built environment and proved to be a good practice example of 3D visualization.

  11. Towards automatic Markov reliability modeling of computer architectures

    Science.gov (United States)

    Liceaga, C. A.; Siewiorek, D. P.

    1986-01-01

    The analysis and evaluation of reliability measures using time-varying Markov models is required for Processor-Memory-Switch (PMS) structures that have competing processes such as standby redundancy and repair, or renewal processes such as transient or intermittent faults. The task of generating these models is tedious and prone to human error due to the large number of states and transitions involved in any reasonable system. Therefore model formulation is a major analysis bottleneck, and model verification is a major validation problem. The general unfamiliarity of computer architects with Markov modeling techniques further increases the necessity of automating the model formulation. This paper presents an overview of the Automated Reliability Modeling (ARM) program, under development at NASA Langley Research Center. ARM will accept as input a description of the PMS interconnection graph, the behavior of the PMS components, the fault-tolerant strategies, and the operational requirements. The output of ARM will be the reliability of availability Markov model formulated for direct use by evaluation programs. The advantages of such an approach are (a) utility to a large class of users, not necessarily expert in reliability analysis, and (b) a lower probability of human error in the computation.

  12. Development of transformations from business process models to implementations by reuse

    OpenAIRE

    Dirgahayu, Teduh; Quartel, Dick; Sinderen, van, Marten; Ferreira Pires, L.; Hammoudi, S.

    2007-01-01

    This paper presents an approach for developing transformations from business process models to implementations that facilitates reuse. A transformation is developed as a composition of three smaller tasks: pattern recognition, pattern realization and activity transformation. The approach allows one to reuse the definition and implementation of pattern recognition and pattern realization in the development of transformations targeting different business process modeling and implementation lang...

  13. Development of Transformations from Business Process Models to Implementations by Reuse

    OpenAIRE

    Dirgahayu, Teduh; Quartel, Dick; Sinderen, van, Marten

    2007-01-01

    This paper presents an approach for developing transformations from business process models to implementations that facilitates reuse. A transformation is developed as a composition of three smaller tasks: pattern recognition, pattern realization and activity transformation. The approach allows one to reuse the definition and implementation of pattern recognition and pattern realization in the development of transformations targeting different business process modeling and implementation lang...

  14. A probabilistic model for face transformation with application to person identification

    OpenAIRE

    Rose Kenneth; Perronnin Florent; Dugelay Jean-Luc

    2004-01-01

    A novel approach for content-based image retrieval and its specialization to face recognition are described. While most face recognition techniques aim at modeling faces, our goal is to model the transformation between face images of the same person. As a global face transformation may be too complex to be modeled directly, it is approximated by a collection of local transformations with a constraint that imposes consistency between neighboring transformations. Local transformations and neig...

  15. Transforming PLC Programs into Formal Models for Verification Purposes

    CERN Document Server

    Darvas, D; Blanco, E

    2013-01-01

    Most of CERN’s industrial installations rely on PLC-based (Programmable Logic Controller) control systems developed using the UNICOS framework. This framework contains common, reusable program modules and their correctness is a high priority. Testing is already applied to find errors, but this method has limitations. In this work an approach is proposed to transform automatically PLC programs into formal models, with the goal of applying formal verification to ensure their correctness. We target model checking which is a precise, mathematical-based method to check formalized requirements automatically against the system.

  16. Transformations among CE–CVM model parameters for multicomponent systems

    Indian Academy of Sciences (India)

    B Nageswara Sarma; Shrikant Lele

    2005-06-01

    In the development of thermodynamic databases for multicomponent systems using the cluster expansion–cluster variation methods, we need to have a consistent procedure for expressing the model parameters (CECs) of a higher order system in terms of those of the lower order subsystems and to an independent set of parameters which exclusively represent interactions of the higher order systems. Such a procedure is presented in detail in this communication. Furthermore, the details of transformations required to express the model parameters in one basis from those defined in another basis for the same system are also presented.

  17. CRUTIAL - Model-based evaluation of the middleware services and protocols & architectural patterns

    OpenAIRE

    Chiaradonna, Silvano; Di Giandomenico, Felicita; Lollini, Paolo; Et. al.,

    2009-01-01

    This deliverable is the final report on the model-based evaluation and validation activity in CRUTIAL. It builds on the interim-report deliverable D25. Please note that the material included goes beyond the scope identified by the deliverable title, since it includes all the model-based evaluations that were included in the goals of WP5. Indeed this deliverable contains the model based evaluation of the architectural solutions, but also an evaluation of the interdependencies between the Elect...

  18. Performance Evaluation of Parallel Message Passing and Thread Programming Model on Multicore Architectures

    OpenAIRE

    D.T Hasta; Mutiara, A. B.

    2010-01-01

    The current trend of multicore architectures on shared memory systems underscores the need of parallelism. While there are some programming model to express parallelism, thread programming model has become a standard to support these system such as OpenMP, and POSIX threads. MPI (Message Passing Interface) which remains the dominant model used in high-performance computing today faces this challenge. Previous version of MPI which is MPI-1 has no shared memory concept, and Current MPI version ...

  19. Pessimistic Predicate/Transform Model for Long Running Business Processes

    Institute of Scientific and Technical Information of China (English)

    WANG Jinling; JIN Beihong; LI Jing

    2005-01-01

    Many business processes in enterprise applications are both long running and transactional in nature. However, no current transaction model can provide full transaction support for such long running business processes. This paper proposes a new transaction model, the pessimistic predicate/transform (PP/T) model, which can provide full transaction support for long running business processes. A framework was proposed on the enterprise JavaBeans platform to implement the PP/T model. The framework enables application developers to focus on the business logic, with the underlying platform providing the required transactional semantics. The development and maintenance effort are therefore greatly reduced. Simulations show that the model has a sound concurrency management ability for long running business processes.

  20. Modelling of Human Glottis in VLSI for Low Power Architectures

    CERN Document Server

    Raj, Nikhil

    2010-01-01

    The Glottal Source is an important component of voice as it can be considered as the excitation signal to the voice apparatus. Nowadays, new techniques of speech processing such as speech recognition and speech synthesis use the glottal closure and opening instants. Current models of the glottal waves derive their shape from approximate information rather than from exactly measured data. General method concentrate on assessment of the glottis opening using optical, acoustical methods, or on visualization of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques. In this work, circuit model of Human Glottis using MOS is designed by exploiting fluid volume velocity to current, fluid pressure to voltage, and linear and nonlinear mechanical impedances to linear and nonlinear electrical impedances. The glottis modeled as current source includes linear, non-linear impedances to represent laminar and turbulent flow respectively, in vocal tract. The MOS modelling and simula...

  1. Biological models for active vision: Towards a unified architecture

    OpenAIRE

    Terzic K.; Lobato D.; Saleiro M.; Martins J; Farrajota M.; Rodrigues J.M.F.; Du Buf J.M.H.

    2013-01-01

    Building a general-purpose, real-time active vision system completely based on biological models is a great challenge. We apply a number of biologically plausible algorithms which address different aspects of vision, such as edge and keypoint detection, feature extraction,optical flow and disparity, shape detection, object recognition and scene modelling into a complete system. We present some of the experiments from our ongoing work, where our system leverages a combination of algorithms to ...

  2. Constructing the barley model for genetic transformation in Triticeae

    Institute of Scientific and Technical Information of China (English)

    LÜ Bo; WU Jia-jie; FU Dao-lin

    2015-01-01

    Barley (Hordeum vulgare L.) is one of the oldest domesticated crops, showing dramatic adaptation to various climate and environmental conditions. As a major cereal crop, barley ranks the 4th after wheat, maize and rice in terms of planting area and production al over the world. Due to its diploid nature, the cultivated barley is considered as an ideal model to study the polyploid wheat and other Triticeae species. Here, we reviewed the development, optimization, and application of transgenic approaches in barley. The most efifcient and robust genetic transformation has been built on the Agrobacterium-mediated transfer in conjunction with the immature embryo-based regeneration. We then discussed future considerations of using more practical technologies in barley transformation, such as the T-DNA/transposon tagging and the genome editing. As a cereal crop amenable to genetic transformation, barley wil serve as the most valuable carrier for global functional genomics in Triticeae and is becoming the most practical model for generating value-added products.

  3. Using UML Modeling to Facilitate Three-Tier Architecture Projects in Software Engineering Courses

    Science.gov (United States)

    Mitra, Sandeep

    2014-01-01

    This article presents the use of a model-centric approach to facilitate software development projects conforming to the three-tier architecture in undergraduate software engineering courses. Many instructors intend that such projects create software applications for use by real-world customers. While it is important that the first version of these…

  4. A Model Based Framework for Semantic Interpretation of Architectural Construction Drawings

    Science.gov (United States)

    Babalola, Olubi Oluyomi

    2011-01-01

    The study addresses the automated translation of architectural drawings from 2D Computer Aided Drafting (CAD) data into a Building Information Model (BIM), with emphasis on the nature, possible role, and limitations of a drafting language Knowledge Representation (KR) on the problem and process. The central idea is that CAD to BIM translation is a…

  5. Impact of Evolution of Concerns in the Model-Driven Architecture Design Approach

    NARCIS (Netherlands)

    Tekinerdogan, Bedir; Aksit, Mehmet; Henninger, Francis

    2007-01-01

    Separation of concerns is an important principle for designing high quality software systems and is both applied in the Model-Driven Architecture (MDA) and Aspect-Oriented Software Development (AOSD). The AOSD and MDA techniques seem to be complementary to each other; historically AOSD has focused o

  6. Software architecture 2

    CERN Document Server

    Oussalah, Mourad Chabanne

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

  7. Software architecture 1

    CERN Document Server

    Oussalah , Mourad Chabane

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

  8. Designing Capital-Intensive Systems with Architectural and Operational Flexibility Using a Screening Model

    Science.gov (United States)

    Lin, Jijun; de Weck, Olivier; de Neufville, Richard; Robinson, Bob; MacGowan, David

    Development of capital intensive systems, such as offshore oil platforms or other industrial infrastructure, generally requires a significant amount of capital investment under various resource, technical, and market uncertainties. It is a very challenging task for development co-owners or joint ventures because important decisions, such as system architectures, have to be made while uncertainty remains high. This paper develops a screening model and a simulation framework to quickly explore the design space for complex engineering systems under uncertainty allowing promising strategies or architectures to be identified. Flexibility in systems’ design and operation is proposed as a proactive means to enable systems to adapt to future uncertainty. Architectural and operational flexibility can improve systems’ lifecycle value by mitigating downside risks and capturing upside opportunities. In order to effectively explore different flexible strategies addressing a view of uncertainty which changes with time, a computational framework based on Monte Carlo simulation is proposed in this paper. This framework is applied to study flexible development strategies for a representative offshore petroleum project. The complexity of this problem comes from multi-domain uncertainties, large architectural design space, and structure of flexibility decision rules. The results demonstrate that architectural and operational flexibility can significantly improve projects’ Expected Net Present Value (ENPV), reduce downside risks, and improve upside gains, compared to adopting an inflexible strategy appropriate to the view of uncertainty at the start of the project. In this particular case study, the most flexible strategy improves ENPV by 85% over an inflexible base case.

  9. Modelling of Human Glottis in VLSI for Low Power Architectures

    Directory of Open Access Journals (Sweden)

    Nikhil Raj

    2010-03-01

    Full Text Available The Glottal Source is an important component of voice as it can be considered as the excitation signal to the voice apparatus. Nowadays, new techniques of speech processing such as speech recognition and speech synthesis use the glottal closure and opening instants. Current models of the glottal waves derive their shape from approximate information rather than from exactly measured data. General method concentrate on assessment of the glottis opening using optical, acoustical methods, or on visualization of the larynx position using ultrasound, computer tomography or magnetic resonance imaging techniques. In this work, circuit model of Human Glottis using MOS is designed by exploiting fluid volume velocity to current, fluid pressure to voltage, and linear and nonlinear mechanical impedances to linear and nonlinear electrical impedances. The glottis modeled as current source includes linear, non-linear impedances to represent laminar and turbulent flow respectively, in vocal tract. The MOS modelling and simulation results of glottal circuit has been carried out on BSIM 3v3 model in TSMC 0.18 micrometer technology using ELDO simulator.

  10. A Reduced High Frequency Transformer Model To Detect The Partial Discharge Locations

    OpenAIRE

    El-Sayed M. El-Refaie; El-Sayed H. Shehab El-Dein

    2014-01-01

    Transformer modeling is the first step in improving partial discharge localization techniques. Different transformer models were used for such purpose. This paper presents a reduced transformer model that can be accurately used for the purpose of partial discharge localization. The model is investigated in alternative transient program (ATP) draw for partial discharge localization application. A comparison between different transformer models is studied, the achieved results of...

  11. Hybrid programming model for implicit PDE simulations on multicore architectures

    KAUST Repository

    Kaushik, Dinesh K.

    2011-01-01

    The complexity of programming modern multicore processor based clusters is rapidly rising, with GPUs adding further demand for fine-grained parallelism. This paper analyzes the performance of the hybrid (MPI+OpenMP) programming model in the context of an implicit unstructured mesh CFD code. At the implementation level, the effects of cache locality, update management, work division, and synchronization frequency are studied. The hybrid model presents interesting algorithmic opportunities as well: the convergence of linear system solver is quicker than the pure MPI case since the parallel preconditioner stays stronger when hybrid model is used. This implies significant savings in the cost of communication and synchronization (explicit and implicit). Even though OpenMP based parallelism is easier to implement (with in a subdomain assigned to one MPI process for simplicity), getting good performance needs attention to data partitioning issues similar to those in the message-passing case. © 2011 Springer-Verlag.

  12. Use of the Chemical Transformation Simulator as a Parameterization Tool for Modeling the Environmental Fate of Organic Chemicals and their Transformation Products

    Science.gov (United States)

    A Chemical Transformation Simulator is a web-based system for predicting transformation pathways and physicochemical properties of organic chemicals. Role in Environmental Modeling • Screening tool for identifying likely transformation products in the environment • Parameteri...

  13. Architecture for Direct Model-to-Part CNC Manufacturing

    OpenAIRE

    Gilbert Poon; Paul Gray; Sanjeev Bedi; Daniel Miller

    2006-01-01

    In the traditional paradigm for Computer Numerical Control (CNC) machining, tool paths are programmed offline from the CNC machine using the Computer-Aided Design (CAD) model of the workpiece. The program is downloaded to the CNC controller and the part is then machined. Since a CAD model does not exist inside the CNC controller, it is unaware of the part to be machined and cannot predict or prevent errors. Not only is this paradigm labor intensive, it can lead to catastrophic damage if there...

  14. INTEGRATED STRATEGIES FOR THE MODELING VERY LARGE AND COMPLEX ARCHITECTURES

    Directory of Open Access Journals (Sweden)

    F. Fassi

    2012-09-01

    Full Text Available The paper would like to present a research job conducted in cooperation with the Veneranda Fabbrica of Milan Cathedral to survey and model the main cathedral spire. The job aims to find methods and a typological way to operate to produce an accurate 3D model to support forthcoming restoration works. The paper will concentrate on the description and analysis of problems and difficulties found during the survey processes and solutions chosen to overcome these problems, both in the measuring phase but in particular in the processing one. Future research is also proposed.

  15. Practical challenges for methods transforming i* goal models into business process models.

    OpenAIRE

    Decreus, Ken; Snoeck, Monique; Poels, Geert

    2009-01-01

    The field of requirements engineering for business processes has grown during the last several years. As business processes are assumed to fulfil organizational goals, goal models could be transformed into business process models that specify how business processes fulfil the organizational goals. Although both the fields of Goal-Oriented RE (GORE) and Business Process Management (BPM) received a lot of attention from researchers, the methods to transform goal models into business process mod...

  16. Visual Modeling and Analysis of EMF Model Transformations based on Triple Graph Grammars

    OpenAIRE

    Ermel, Claudia; Hermann, Frank; Gall, Jürgen; Binanzer, Daniel

    2012-01-01

    The tool HENSHIN is an Eclipse plug-in supporting visual modeling and execution of rule-based EMF model transformations. This paper describes the recent extensions of HENSHIN by a visual editor for triple graph grammars (TGGs). The visual editor (called HENSHINTGG) supports a compact visualization of triple rules in an integrated editor panel. Internally, triple graph rules are represented as HENSHIN rules and can be simulated using the HENSHIN EMF model transformation engine. Our extension s...

  17. Architectural models for client interaction on service-oriented platforms

    NARCIS (Netherlands)

    Bonino da Silva Santos, L.O.; Ferreira Pires, L.; Sinderen, van M.J.; Sinderen, van M.J.

    2007-01-01

    Service-oriented platforms can provide different levels of functionality to the client applications as well as different interaction models. Depending on the platform’s goals and the computing capacity of their expected clients the platform functionality can range from just an interface to support t

  18. Product Lifecycle Management Architecture: A Model Based Systems Engineering Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, Nicholas James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This report is an analysis of the Product Lifecycle Management (PLM) program. The analysis is centered on a need statement generated by a Nuclear Weapons (NW) customer. The need statement captured in this report creates an opportunity for the PLM to provide a robust service as a solution. Lifecycles for both the NW and PLM are analyzed using Model Based System Engineering (MBSE).

  19. Architecture for Direct Model-to-Part CNC Manufacturing

    Directory of Open Access Journals (Sweden)

    Gilbert Poon

    2006-02-01

    Full Text Available In the traditional paradigm for Computer Numerical Control (CNC machining, tool paths are programmed offline from the CNC machine using the Computer-Aided Design (CAD model of the workpiece. The program is downloaded to the CNC controller and the part is then machined. Since a CAD model does not exist inside the CNC controller, it is unaware of the part to be machined and cannot predict or prevent errors. Not only is this paradigm labor intensive, it can lead to catastrophic damage if there are errors during machining. This paper presents a new concept for CNC machine control whereby a CAD model of the workpiece exists inside the controller and the tool positions are generated in real-time by the controller using the computer's graphics hardware without human intervention. The new concept was implemented on an experimental lathe machine specifically designed to machine complicated ornamental wood workpieces with a personal computer. An example workpiece was machined and measured using a 3D camera. The measured data was registered to the CAD model to evaluate machining accuracy.

  20. Spectrum emission considerations for baseband-modeled CALLUM architectures

    DEFF Research Database (Denmark)

    Strandberg, Roland; Andreani, Pietro; Sundström, Lars

    2005-01-01

    the control equations governing it. The main purpose of this paper has been the derivation of a linearized model for the control equations, which enables the use of linear network theory in the study of CALLUM. In particular, it can be used to analyze the stability and maximize the bandwidth of the...

  1. Fractal Architecture

    OpenAIRE

    Rumież, Agnieszka

    2013-01-01

    Research focuses on the recognition of the disposition of natural environment, which serves as an inspiration for cultural creation as it has always been in the history of architecture. Modern mathematical model of fractal geometry has been used to understand patterns occurring in the surrounding. The comparative analysis has been conducted between the abstract mathematical model and architectural composition in the view of contemporary cognitive paradigms. In conclusion, a hypothesis of a ne...

  2. Statistical modeling of nitrogen-dependent modulation of root system architecture in Arabidopsis thaliana

    Institute of Scientific and Technical Information of China (English)

    Takao Araya; Takuya Kubo; Nicolaus von Wiren; Hideki Takahashi

    2016-01-01

    Plant root development is strongly affected by nutrient availability. Despite the importance of structure and function of roots in nutrient acquisition, statistical modeling approaches to evaluate dynamic and temporal modulations of root system architecture in response to nutrient availability have remained as widely open and exploratory areas in root biology. In this study, we developed a statistical modeling approach to investigate modulations of root system archi-tecture in response to nitrogen availability. Mathematical models were designed for quantitative assessment of root growth and root branching phenotypes and their dynamic relationships based on hierarchical configuration of primary and lateral roots formulating the fishbone-shaped root system architecture in Arabidopsis thaliana. Time-series datasets reporting dynamic changes in root developmental traits on different nitrate or ammonium concentrations were gener-ated for statistical analyses. Regression analyses unraveled key parameters associated with:(i) inhibition of primary root growth under nitrogen limitation or on ammonium;(i ) rapid progression of lateral root emergence in response to ammonium; and (i i) inhibition of lateral root elongation in the presence of excess nitrate or ammonium. This study provides a statistical framework for interpreting dynamic modulation of root system architecture, supported by meta-analysis of datasets displaying morphological responses of roots to diverse nitrogen supplies.

  3. TP-model transformation-based-control design frameworks

    CERN Document Server

    Baranyi, Péter

    2016-01-01

    This book covers new aspects and frameworks of control, design, and optimization based on the TP model transformation and its various extensions. The author outlines the three main steps of polytopic and LMI based control design: 1) development of the qLPV state-space model, 2) generation of the polytopic model; and 3) application of LMI to derive controller and observer. He goes on to describe why literature has extensively studied LMI design, but has not focused much on the second step, in part because the generation and manipulation of the polytopic form was not tractable in many cases. The author then shows how the TP model transformation facilitates this second step and hence reveals new directions, leading to powerful design procedures and the formulation of new questions. The chapters of this book, and the complex dynamical control tasks which they cover, are organized so as to present and analyze the beneficial aspect of the family of approaches (control, design, and optimization). Additionally, the b...

  4. Implementation of Remaining Useful Lifetime Transformer Models in the Fleet-Wide Prognostic and Health Management Suite

    International Nuclear Information System (INIS)

    Research and development efforts are required to address aging and reliability concerns of the existing fleet of nuclear power plants. As most plants continue to operate beyond the license life (i.e., towards 60 or 80 years), plant components are more likely to incur age-related degradation mechanisms. To assess and manage the health of aging plant assets across the nuclear industry, the Electric Power Research Institute has developed a web-based Fleet-Wide Prognostic and Health Management (FW-PHM) Suite for diagnosis and prognosis. FW-PHM is a set of web-based diagnostic and prognostic tools and databases, comprised of the Diagnostic Advisor, the Asset Fault Signature Database, the Remaining Useful Life Advisor, and the Remaining Useful Life Database, that serves as an integrated health monitoring architecture. The main focus of this paper is the implementation of prognostic models for generator step-up transformers in the FW-PHM Suite. One prognostic model discussed is based on the functional relationship between degree of polymerization, (the most commonly used metrics to assess the health of the winding insulation in a transformer) and furfural concentration in the insulating oil. The other model is based on thermal-induced degradation of the transformer insulation. By utilizing transformer loading information, established thermal models are used to estimate the hot spot temperature inside the transformer winding. Both models are implemented in the Remaining Useful Life Database of the FW-PHM Suite. The Remaining Useful Life Advisor utilizes the implemented prognostic models to estimate the remaining useful life of the paper winding insulation in the transformer based on actual oil testing and operational data.

  5. Implementation of Remaining Useful Lifetime Transformer Models in the Fleet-Wide Prognostic and Health Management Suite

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lybeck, Nancy J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pham, Binh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rusaw, Richard [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Bickford, Randall [Expert Microsystems, Orangevale, CA (United States)

    2015-02-01

    Research and development efforts are required to address aging and reliability concerns of the existing fleet of nuclear power plants. As most plants continue to operate beyond the license life (i.e., towards 60 or 80 years), plant components are more likely to incur age-related degradation mechanisms. To assess and manage the health of aging plant assets across the nuclear industry, the Electric Power Research Institute has developed a web-based Fleet-Wide Prognostic and Health Management (FW-PHM) Suite for diagnosis and prognosis. FW-PHM is a set of web-based diagnostic and prognostic tools and databases, comprised of the Diagnostic Advisor, the Asset Fault Signature Database, the Remaining Useful Life Advisor, and the Remaining Useful Life Database, that serves as an integrated health monitoring architecture. The main focus of this paper is the implementation of prognostic models for generator step-up transformers in the FW-PHM Suite. One prognostic model discussed is based on the functional relationship between degree of polymerization, (the most commonly used metrics to assess the health of the winding insulation in a transformer) and furfural concentration in the insulating oil. The other model is based on thermal-induced degradation of the transformer insulation. By utilizing transformer loading information, established thermal models are used to estimate the hot spot temperature inside the transformer winding. Both models are implemented in the Remaining Useful Life Database of the FW-PHM Suite. The Remaining Useful Life Advisor utilizes the implemented prognostic models to estimate the remaining useful life of the paper winding insulation in the transformer based on actual oil testing and operational data.

  6. Modeling Medical Diagnosis Using a Comprehensive Cognitive Architecture

    OpenAIRE

    Stephen Strain; Stan Franklin

    2011-01-01

    Medical diagnosis is accomplished by a set of complex cognitive processes requiring the iterative application of abduction, deduction, and induction. Previous research in computational modeling of medical diagnosis has had only limited success by defining sub-domains that offer a computationally tractable problem. However, the aspect of diagnostic reasoning requiring intelligence lies in the extraction of a well-structured problem from an ill-structured one. We propose an agent, based on the ...

  7. A model-driven architecture for electronicservice management systems

    OpenAIRE

    Piccinelli, G.; Emmerich, W.; Williams, S L; Stearns, M.

    2003-01-01

    Mainly on the wake of the Web Service initiative, electronic services are emerging as a reference model for business information technology systems. Individual applications retain core functions and technology base, but integration becomes crucial. A business service derives from the coordination of different business capabilities. The related electronic service derives from the integration of the different applications sustaining such capabilities. The effective realisation of an electronic ...

  8. Abstract Platform and Transformations for Model-Driven Service-Oriented Development

    NARCIS (Netherlands)

    Andrade Almeida, J.P.; Ferreira Pires, L.; Sinderen, van M.J.

    2006-01-01

    In this paper, we discuss the use of abstract platforms and transformation for designing applications according to the principles of the service-oriented architecture. We illustrate our approach by discussing the use of the service discovery pattern at a platform-independent design level. We show ho

  9. MAS architecture and knowledge model for vehicles data communication

    Directory of Open Access Journals (Sweden)

    René MANDIAU

    2013-07-01

    Full Text Available Normal 0 21 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Completely autonomous vehicles in traffic should allow to decrease the number of road accident victims greatly, and should allow gains in terms of performance and economy. Modelling the vehicles interaction, and especially knowledge sharing, is one of the main challenges to optimize traffic flow with autonomous vehicles. We propose in this paper a model of knowledge communication between mobile agents on a traffic network. The model of knowledge and of interaction enables to propagate new knowledge without overloading the system with a too large number of communications. For that, only the new knowledge is communicated, and two agents communicate the same knowledge only once. Moreover, in order to allow agents to update their knowledge (perceived or created, a notion of degradation is used. A simulator has been built to evaluate the proposal, before to implement it in mobile robots. Some results of the simulator are proposed in this article.

  10. MAS architecture and knowledge model for vehicles data communication

    Directory of Open Access Journals (Sweden)

    Emmanuel ADAM

    2012-07-01

    Full Text Available Normal 0 21 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Completely autonomous vehicles in traffic should allow to decrease the number of road accident victims greatly, and should allow gains in terms of performance and economy. Modelling the vehicles interaction, and especially knowledge sharing, is one of the main challenges to optimize traffic flow with autonomous vehicles. We propose in this paper a model of knowledge communication between mobile agents on a traffic network. The model of knowledge and of interaction enables to propagate new knowledge without overloading the system with a too large number of communications. For that, only the new knowledge is communicated, and two agents communicate the same knowledge only once. Moreover, in order to allow agents to update their knowledge (perceived or created, a notion of degradation is used. A simulator has been built to evaluate the proposal, before to implement it in mobile robots. Some results of the simulator are proposed in this article.

  11. High frequency modeling of power transformers. Stresses and diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Bjerkan, Eilert

    2005-05-15

    In this thesis a reliable, versatile and rigorous method for high frequency power transformer modeling is searched and established. The purpose is to apply this model to sensitivity analysis of FRA (Frequency Response Analysis) which is a quite new diagnostic method for assessing the mechanical integrity of power transformer windings on-site. The method should be versatile in terms of being able to estimate internal and external over voltages and resonances. Another important aspect is that the method chosen is suitable for real transformer geometries. In order to verify the suitability of the model for real transformers, a specific test-object is used. This is a 20MVA transformer, and details are given in chapter 1.4. The high frequency power transformer model is established from geometrical and constructional information from the manufacturer, together with available material characteristics. All circuit parameters in the lumped circuit representation are calculated based on these data. No empirical modifications need to be performed. Comparison shows capability of reasonable accuracy in the range from 10 khz to 1 MHz utilizing a disc-to-disc representation. A compromise between accuracy of model due to discretization and complexity of the model in a turn-to-turn representation is inevitable. The importance of the iron core is emphasized through a comparison of representations with/without the core included. Frequency-dependent phenomena are accurately represented using an isotropic equivalent for windings and core, even with a coarse mesh for the FEM-model. This is achieved through a frequency-dependent complex permeability representation of the materials. This permeability is deduced from an analytical solution of the frequency-dependent magnetic field inside the conductors and the core. The importance of dielectric losses in a transformer model is also assessed. Since published data on the high frequency properties of press board are limited, some initial

  12. Integrating Microarray Gene Expression Object Model and Clinical Document Architecture for Cancer Genomics Research

    OpenAIRE

    Park, Yu Rang; Lee, Hye Won; Kim, Ju Han

    2005-01-01

    Systematic integration of gene expression profiling with clinical information may facilitate cancer genomics research. MAGE-OM (MicroArray Gene Expression Object Model) defines standard objects for genomic but not for clinical data. HL7 CDA (Clinical Document Architecture) is a document model for clinical information, describing syntax but not semantics. We designed a document template and common data elements in XML Schema with additional constraints for CDA to define conte...

  13. Generation of Component Based Architecture from Business Processes: Model Driven Engineering for SOA

    OpenAIRE

    Dahman, Karim; Charoy, François; Godart, Claude

    2010-01-01

    Service-Oriented Architecture (SOA) has significantly enhanced inter-organizational systems enabling business flexibility, Information Technology (IT) agility, and value generation. However, building a SOA that reduces technology-driven business and leverages process management seems referring to the recurrent issues of business process logic and IT alignment. This paper presents a model-driven development approach where long-running business service composition models drive their supporting ...

  14. Model-driven Algorithms and Architectures for Self-Aware Computing Systems (Dagstuhl Seminar 15041)

    OpenAIRE

    Kounev, Samuel; Zhu, Xiaoyun; Kephart, Jeffrey O.; Kwiatkowska, Marta

    2015-01-01

    This report documents the program and the outcomes of Dagstuhl Seminar 15041 "Model-driven Algorithms and Architectures for Self-Aware Computing Systems". The design of self-aware computing systems calls for an integrated interdisciplinary approach building on results from multiple areas of computer science and engineering, including software and systems engineering, systems modeling, simulation and analysis, autonomic and organic computing, machine learning and artificial intelligence, data ...

  15. Workshare Process of Thread Programming and MPI Model on Multicore Architecture

    OpenAIRE

    Refianti, R.; Mutiara, A. B.; D.T Hasta

    2011-01-01

    Comparison between OpenMP for thread programming model and MPI for message passing programming model will be conducted on multicore shared memory machine architectures in order to find which has a better performance in terms of speed and throughput. Application used to assess the scalability of the evaluated parallel programming solutions is matrix multiplication with customizable matrix dimension. Many research done on a large scale parallel computing which using high scale benchmark such as...

  16. Femoral bone mesoscale structural architecture prediction using musculoskeletal and finite element modelling

    OpenAIRE

    Phillips, A T M; Villette, C.; Modenese, L.

    2015-01-01

    Through much of the anatomical and clinical literature bone is studied with a focus on its structural architecture, while it is rare for bone to be modelled using a structural mechanics as opposed to a continuum mechanics approach in the engineering literature. A novel mesoscale structural model of the femur is presented in which truss and shell elements are used to represent trabecular and cortical bone, respectively. Structural optimisation using a strain-based bone adaptation algorithm is ...

  17. Model-Driven Game Development Addressing Architectural Diversity and Game Engine-Integration

    OpenAIRE

    Zhu, Meng

    2015-01-01

    Model-Driven Game Development (MDGD) is an emerging research field, which uses models to specify some or all of the game elements that traditionally had been manually coded. The PhD thesis presents research in the MDGD domain, which is intended to push MDGD further towards industrialization by reducing two gaps: 1) The integration of MDGD tools and game engines, and 2) The support for a diversity of game architectures. These gaps have been identified through a literature review...

  18. Model Complexity of Neural Networks and Integral Transforms

    Czech Academy of Sciences Publication Activity Database

    Kůrková, Věra

    Berlin : Springer, 2009 - (Alippi, C.; Polycarpou, M.; Panayiotou, C.; Ellinas, G.), s. 708-717 ISBN 978-3-642-04273-7. - (Lecture Notes in Computer Science. 5768). [ICANN 2009. International Conference on Artificial Neural Network s /19./. Limassol (CY), 14.09.2009-17.09.2009] R&D Projects: GA ČR GA201/08/1744 Institutional research plan: CEZ:AV0Z10300504 Keywords : model complexity * integral transforms induced by computational units Subject RIV: IN - Informatics, Computer Science

  19. ASYMPTOTICS OF MEAN TRANSFORMATION ESTIMATORS WITH ERRORS IN VARIABLES MODEL

    Institute of Scientific and Technical Information of China (English)

    CUI Hengjian

    2005-01-01

    This paper addresses estimation and its asymptotics of mean transformation θ = E[h(X)] of a random variable X based on n iid. Observations from errors-in-variables model Y = X + v, where v is a measurement error with a known distribution and h(.) is a known smooth function. The asymptotics of deconvolution kernel estimator for ordinary smooth error distribution and expectation extrapolation estimator are given for normal error distribution respectively. Under some mild regularity conditions, the consistency and asymptotically normality are obtained for both type of estimators. Simulations show they have good performance.

  20. Digital Image Watermaking in Color Models Using DCT Transformation

    Directory of Open Access Journals (Sweden)

    D. Levicky

    2004-04-01

    Full Text Available In recent years, an access to multimedia data has become much easierdue to the rapid growth of the Internet. While this is usuallyconsidered an improvement of everyday life, it also makes unauthorizedcopying and distributing of multimedia data much easier, thereforepresenting a challenge in the field of copyright protection. Digitalwatermarking, which is inserting copyright information into the data,has been proposed to solve the problem. In this paper two originalwatermarking schemes based on DCT transformation for ownershipverification and authentication of color images were proposed. Somecolor models in process of watermarks embedding and extracting aredescribed too.

  1. Culture models of human mammary epithelial cell transformation

    Energy Technology Data Exchange (ETDEWEB)

    Stampfer, Martha R.; Yaswen, Paul

    2000-11-10

    Human pre-malignant breast diseases, particularly ductal carcinoma in situ (DCIS)3 already display several of the aberrant phenotypes found in primary breast cancers, including chromosomal abnormalities, telomerase activity, inactivation of the p53 gene and overexpression of some oncogenes. Efforts to model early breast carcinogenesis in human cell cultures have largely involved studies in vitro transformation of normal finite lifespan human mammary epithelial cells (HMEC) to immortality and malignancy. We present a model of HMEC immortal transformation consistent with the know in vivo data. This model includes a recently described, presumably epigenetic process, termed conversion, which occurs in cells that have overcome stringent replicative senescence and are thus able to maintain proliferation with critically short telomeres. The conversion process involves reactivation of telomerase activity, and acquisition of good uniform growth in the absence and presence of TFGB. We propose th at overcoming the proliferative constraints set by senescence, and undergoing conversion, represent key rate-limiting steps in human breast carcinogenesis, and occur during early stage breast cancer progression.

  2. Generating WS-SecurityPolicy documents via security model transformation

    DEFF Research Database (Denmark)

    Jensen, Meiko

    2009-01-01

    When SOA-based business processes are to be enhanced with security properties, the model-driven business process development approach enables an easier and more reliable security definition compared to manually crafting the security realizations afterwards. In this paper, we outline an appropriat...... security model definition and transformation approach, targeting the WS-SecurityPolicy and WS-BPEL specifications, in order to enable a Web-Service-based secure business process development.......When SOA-based business processes are to be enhanced with security properties, the model-driven business process development approach enables an easier and more reliable security definition compared to manually crafting the security realizations afterwards. In this paper, we outline an appropriate...

  3. A Framework Model for an Order Fulfillment System Based on Service Oriented Architecture

    Institute of Scientific and Technical Information of China (English)

    YANG Li-xi; LI Shi-qi

    2008-01-01

    To effectively implement order fulfillment, we present an integrated framework model focusing on the whole process of order fulfillment. Firstly, five aims of the OFS (order fulfillment system) are built. Then after discussing three major processes of order fulfillment, we summarize functional and quality attributes of the OFS. Subsequently, we investigate SOA (Service Oriented Architecture) and present a SOA meta-model to be an integrated framework and to fulfill quality requirements. Moreover, based on the SOA meta-model, we construct a conceptual framework model that aims to conveniently integrate other functions from different systems into the order fulfillment system. This model offers enterprises a new approach to implementing order fulfillment.

  4. DEVELOPMENT AND RESEARCH MODELS OF BUSINESS ARCHITECTURE OF SUBSYSTEM SALES OF CORPORATE INTEGRATED STRUCTURE

    Directory of Open Access Journals (Sweden)

    Baranovskaya T. P.

    2015-10-01

    Full Text Available The article describes basic principles and the results of modeling the business architecture of the company on the example of the subsystem sales of integrated corporate structures. As the object of investigation we have chosen the company called Dinskoy Meatprocessing complex, which is part of Southern diversified Corporation. The main artifacts of the conducted research are: graphical layout of business processes of a subsystem of the sales made in the instrumental environment of All Fusion Process Modeler (BPWin and developed a model of decomposition of business processes, a model of business event, a model for the location of functions and integration model, and to evaluate the relationship between the business processes with the strategic direction of the organization. The source data for the study were collected by conducting a special survey of the organization within which the surveys were conducted, and interviewing of managers and employees of relevant structures of the research object, the study of local normative documents, regulations on departments, job descriptions, etc. The resulting set of artifacts of business architecture can be used further in the process of re-engineering business processes, developing indicators for the effectiveness functions, business processes, organization, and development of requirements for the application systems that automate the processing of data and development of subsequent domains of enterprise architecture

  5. Creative Practices Embodied, Embedded, and Enacted in Architectural Settings: Toward an Ecological Model of Creativity.

    Science.gov (United States)

    Malinin, Laura H

    2015-01-01

    Memoires by eminently creative people often describe architectural spaces and qualities they believe instrumental for their creativity. However, places designed to encourage creativity have had mixed results, with some found to decrease creative productivity for users. This may be due, in part, to lack of suitable empirical theory or model to guide design strategies. Relationships between creative cognition and features of the physical environment remain largely uninvestigated in the scientific literature, despite general agreement among researchers that human cognition is physically and socially situated. This paper investigates what role architectural settings may play in creative processes by examining documented first person and biographical accounts of creativity with respect to three central theories of situated cognition. First, the embodied thesis argues that cognition encompasses both the mind and the body. Second, the embedded thesis maintains that people exploit features of the physical and social environment to increase their cognitive capabilities. Third, the enaction thesis describes cognition as dependent upon a person's interactions with the world. Common themes inform three propositions, illustrated in a new theoretical framework describing relationships between people and their architectural settings with respect to different cognitive processes of creativity. The framework is intended as a starting point toward an ecological model of creativity, which may be used to guide future creative process research and architectural design strategies to support user creative productivity. PMID:26779087

  6. Providing a Security Model Based on Service Oriented Architecture in Electronic Banking

    Directory of Open Access Journals (Sweden)

    Sima Emadi

    2013-10-01

    Full Text Available With the increasing advances in IT world and the use of distributed systems, complexity and performance ofapplications have also changed. Banks require proper cooperation and integration among organizational systems toprovide effective and correct services. On the other hand, they contain diverse and heterogeneous infrastructures,applications and systems. Cooperation and integration among these systems require interactions and informationsharing among the users. The service-oriented architecture is the latest generation of information systems'architecture and has become quickly inclusive in recent years. One of the important features of this architecture isthe numerous users of different subsystems and their communication and cooperation in activities. In thisarchitecture, resources and services are often provided in sharing for different users. But, such features in serviceorientedarchitecture have brought about some challenges to the technology, one of which is 'the security'. Theneed for a security model in service-oriented architecture seems essential due to the distributed nature of thearchitecture, its reusability and accessibility. In this model, security requirements and standards for different layersare studied.

  7. Beyond Virtual Replicas: 3D Modeling and Maltese Prehistoric Architecture

    Directory of Open Access Journals (Sweden)

    Filippo Stanco

    2013-01-01

    Full Text Available In the past decade, computer graphics have become strategic for the development of projects aimed at the interpretation of archaeological evidence and the dissemination of scientific results to the public. Among all the solutions available, the use of 3D models is particularly relevant for the reconstruction of poorly preserved sites and monuments destroyed by natural causes or human actions. These digital replicas are, at the same time, a virtual environment that can be used as a tool for the interpretative hypotheses of archaeologists and as an effective medium for a visual description of the cultural heritage. In this paper, the innovative methodology and aims and outcomes of a virtual reconstruction of the Borg in-Nadur megalithic temple, carried out by Archeomatica Project of the University of Catania, are offered as a case study for a virtual archaeology of prehistoric Malta.

  8. Diagnostic and Prognostic Models for Generator Step-Up Transformers

    Energy Technology Data Exchange (ETDEWEB)

    Vivek Agarwal; Nancy J. Lybeck; Binh T. Pham

    2014-09-01

    In 2014, the online monitoring (OLM) of active components project under the Light Water Reactor Sustainability program at Idaho National Laboratory (INL) focused on diagnostic and prognostic capabilities for generator step-up transformers. INL worked with subject matter experts from the Electric Power Research Institute (EPRI) to augment and revise the GSU fault signatures previously implemented in the Electric Power Research Institute’s (EPRI’s) Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. Two prognostic models were identified and implemented for GSUs in the FW-PHM Suite software. INL and EPRI demonstrated the use of prognostic capabilities for GSUs. The complete set of fault signatures developed for GSUs in the Asset Fault Signature Database of the FW-PHM Suite for GSUs is presented in this report. Two prognostic models are described for paper insulation: the Chendong model for degree of polymerization, and an IEEE model that uses a loading profile to calculates life consumption based on hot spot winding temperatures. Both models are life consumption models, which are examples of type II prognostic models. Use of the models in the FW-PHM Suite was successfully demonstrated at the 2014 August Utility Working Group Meeting, Idaho Falls, Idaho, to representatives from different utilities, EPRI, and the Halden Research Project.

  9. A service-oriented architecture for integrating the modeling and formal verification of genetic regulatory networks

    Directory of Open Access Journals (Sweden)

    Page Michel

    2009-12-01

    Full Text Available Abstract Background The study of biological networks has led to the development of increasingly large and detailed models. Computer tools are essential for the simulation of the dynamical behavior of the networks from the model. However, as the size of the models grows, it becomes infeasible to manually verify the predictions against experimental data or identify interesting features in a large number of simulation traces. Formal verification based on temporal logic and model checking provides promising methods to automate and scale the analysis of the models. However, a framework that tightly integrates modeling and simulation tools with model checkers is currently missing, on both the conceptual and the implementational level. Results We have developed a generic and modular web service, based on a service-oriented architecture, for integrating the modeling and formal verification of genetic regulatory networks. The architecture has been implemented in the context of the qualitative modeling and simulation tool GNA and the model checkers NUSMV and CADP. GNA has been extended with a verification module for the specification and checking of biological properties. The verification module also allows the display and visual inspection of the verification results. Conclusions The practical use of the proposed web service is illustrated by means of a scenario involving the analysis of a qualitative model of the carbon starvation response in E. coli. The service-oriented architecture allows modelers to define the model and proceed with the specification and formal verification of the biological properties by means of a unified graphical user interface. This guarantees a transparent access to formal verification technology for modelers of genetic regulatory networks.

  10. Modeling biochemical transformation processes and information processing with Narrator

    Directory of Open Access Journals (Sweden)

    Palfreyman Niall M

    2007-03-01

    Full Text Available Abstract Background Software tools that model and simulate the dynamics of biological processes and systems are becoming increasingly important. Some of these tools offer sophisticated graphical user interfaces (GUIs, which greatly enhance their acceptance by users. Such GUIs are based on symbolic or graphical notations used to describe, interact and communicate the developed models. Typically, these graphical notations are geared towards conventional biochemical pathway diagrams. They permit the user to represent the transport and transformation of chemical species and to define inhibitory and stimulatory dependencies. A critical weakness of existing tools is their lack of supporting an integrative representation of transport, transformation as well as biological information processing. Results Narrator is a software tool facilitating the development and simulation of biological systems as Co-dependence models. The Co-dependence Methodology complements the representation of species transport and transformation together with an explicit mechanism to express biological information processing. Thus, Co-dependence models explicitly capture, for instance, signal processing structures and the influence of exogenous factors or events affecting certain parts of a biological system or process. This combined set of features provides the system biologist with a powerful tool to describe and explore the dynamics of life phenomena. Narrator's GUI is based on an expressive graphical notation which forms an integral part of the Co-dependence Methodology. Behind the user-friendly GUI, Narrator hides a flexible feature which makes it relatively easy to map models defined via the graphical notation to mathematical formalisms and languages such as ordinary differential equations, the Systems Biology Markup Language or Gillespie's direct method. This powerful feature facilitates reuse, interoperability and conceptual model development. Conclusion Narrator is a

  11. Rethinking models of architectural research: we don’t do objects

    Directory of Open Access Journals (Sweden)

    Jim Stevens

    2012-10-01

    Full Text Available Historically, an argument can be made that architectural research was produced internal to firms and manufacturers as proprietary objects or sets of data. The concept of disciplines and professions reinforced the separation of open-sourced knowledge and the application of that knowledge in a commercial context. However, design has rapidly changed from an object-solution profession and is now faced with finding solutions to complex problems within complex systems. The past practice model of client, architect, and final product seems an ill-fit in this new context. The question is how to integrate a critical research process into a professional capacity in which that architectural research needs an inherent and immediate value to be performed or pursued. The SYNCH Research Group [synchRG] was formed in response to this question. Although research consortiums, design initiatives and research centres exist within many schools of architecture, most operate as a department or extensions of a school of architecture. SynchRG operates in neither private practice nor as a division of the university. Organized as a diverse and fluid association of faculty, students, professionals, and consultants, the synchRG group is focused on a designmethodology and philosophical structure rather than a client, site, building, typology, or object. The focus on idiosyncratic or aesthetic solutions to singular problems is set aside in order to provide acollaborative intellectual space for professional based explorations. The paper will examine synchRG’s response to current architectural research challenges and illustrate its unique structure as a possible model to be replicated. A dialogue will be initiated on a model for practice aligned with both academia and industry.

  12. ARCHITECTURAL FRAMEWORK FOR GENERIC MODELING AND DIAGRAMMING IN THE CLOUD

    Directory of Open Access Journals (Sweden)

    Laszlo Juracz

    2011-01-01

    Full Text Available This paper is aimed at presenting a concept of a flexible diagramming framework for building engineering and educational applications. The framework was designed to serve as a platform for online services and collaborative environments where users typically work on remotely stored, shared data through a browser-based user interface. The paper summarizes the common requirements towards such services, overviews related approaches and gives insights into some design challenges through the analysis of two use-cases. The design problem is examined from a user-centered view: the key motivation of our research is to find innovative, possibly device- independent solutions that enable seamless user experiences. A generic framework based on JavaScript and HTML5 on the client-side, using novel, high-performance JavaScript technologies on the server-side is proposed. This framework could be employed for implementing a wide spectrum of software solutions from diagramming- related e-learning to cloud-based modeling environments.

  13. Operations Assessment of Launch Vehicle Architectures using Activity Based Cost Models

    Science.gov (United States)

    Ruiz-Torres, Alex J.; McCleskey, Carey

    2000-01-01

    The growing emphasis on affordability for space transportation systems requires the assessment of new space vehicles for all life cycle activities, from design and development, through manufacturing and operations. This paper addresses the operational assessment of launch vehicles, focusing on modeling the ground support requirements of a vehicle architecture, and estimating the resulting costs and flight rate. This paper proposes the use of Activity Based Costing (ABC) modeling for this assessment. The model uses expert knowledge to determine the activities, the activity times and the activity costs based on vehicle design characteristics. The approach provides several advantages to current approaches to vehicle architecture assessment including easier validation and allowing vehicle designers to understand the cost and cycle time drivers.

  14. Recognizing architectural distortion in mammogram: a multiscale texture modeling approach with GMM.

    Science.gov (United States)

    Biswas, Sujoy Kumar; Mukherjee, Dipti Prasad

    2011-07-01

    We propose a generative model for constructing an efficient set of distinctive textures for recognizing architectural distortion in digital mammograms. In the first layer of the proposed two-layer architecture, the mammogram is analyzed by a multiscale oriented filter bank to form texture descriptor of vectorized filter responses. Our model presumes that every mammogram can be characterized by a "bag of primitive texture patterns" and the set of textural primitives (or textons) is represented by a mixture of Gaussians which builds up the second layer of the proposed model. The observed textural descriptor in the first layer is assumed to be a stochastic realization of one (hard mapping) or more (soft mapping) textural primitive(s) from the second layer. The results obtained on two publicly available datasets, namely Mammographic Image Analysis Society (MIAS) and Digital Database for Screening Mammography (DDSM), demonstrate the efficacy of the proposed approach. PMID:21421429

  15. Energy modelling of PREMIO platform, an architecture dedicated to dynamic= load management on electric grid

    International Nuclear Information System (INIS)

    The cluster of competencies CapEnergies in co-founding with the PACA region launched PREMIO project in 2008. This project aims at implementing a local, innovative and replicable energy architecture that optimizes dynamic load management in order to diminish constraints on power grid and CO2 emissions. Technical, economical, environmental and sociological impacts of this technology are a strategic issue for project partners that elaborate the business models and future energy policies.The model developed in the frame of PREMIO project provides at local scale (district to city) a method to assess the impact of PREMIO architecture on load curve, CO2 emissions and energy savings. A case study realised in Lambesc (PACA region) simulates two deployment scenarios of manageable systems: 100% and 50% of the territory consumption, storage and production usages. The exploitation of these results gives prospects to improve this model. (authors)

  16. A latent variable transformation model approach for exploring dysphagia.

    Science.gov (United States)

    Snavely, Anna C; Harrington, David P; Li, Yi

    2014-11-10

    Multiple outcomes are often collected in applications where the quantity of interest cannot be measured directly or is difficult or expensive to measure. In a head and neck cancer study conducted at Dana-Farber Cancer Institute, the investigators wanted to determine the effect of clinical and treatment factors on unobservable dysphagia through collected multiple outcomes of mixed types. Latent variable models are commonly adopted in this setting. These models stipulate that multiple collected outcomes are conditionally independent given the latent factor. Mixed types of outcomes (e.g., continuous vs. ordinal) and censored outcomes present statistical challenges, however, as a natural analog of the multivariate normal distribution does not exist for mixed data. Recently, Lin et al. proposed a semiparametric latent variable transformation model for mixed outcome data; however, it may not readily accommodate event time outcomes where censoring is present. In this paper, we extend the work of Lin et al. by proposing both semiparametric and parametric latent variable models that allow for the estimation of the latent factor in the presence of measurable outcomes of mixed types, including censored outcomes. Both approaches allow for a direct estimate of the treatment (or other covariate) effect on the unobserved latent variable, greatly enhancing the interpretability of the models. The semiparametric approach has the added advantage of allowing the relationship between the measurable outcomes and latent variables to be unspecified, rendering more robust inference. The parametric and semiparametric models can also be used together, providing a comprehensive modeling strategy for complicated latent variable problems. PMID:24974798

  17. Developing a reversible rapid coordinate transformation model for the cylindrical projection

    Science.gov (United States)

    Ye, Si-jing; Yan, Tai-lai; Yue, Yan-li; Lin, Wei-yan; Li, Lin; Yao, Xiao-chuang; Mu, Qin-yun; Li, Yong-qin; Zhu, De-hai

    2016-04-01

    Numerical models are widely used for coordinate transformations. However, in most numerical models, polynomials are generated to approximate "true" geographic coordinates or plane coordinates, and one polynomial is hard to make simultaneously appropriate for both forward and inverse transformations. As there is a transformation rule between geographic coordinates and plane coordinates, how accurate and efficient is the calculation of the coordinate transformation if we construct polynomials to approximate the transformation rule instead of "true" coordinates? In addition, is it preferable to compare models using such polynomials with traditional numerical models with even higher exponents? Focusing on cylindrical projection, this paper reports on a grid-based rapid numerical transformation model - a linear rule approximation model (LRA-model) that constructs linear polynomials to approximate the transformation rule and uses a graticule to alleviate error propagation. Our experiments on cylindrical projection transformation between the WGS 84 Geographic Coordinate System (EPSG 4326) and the WGS 84 UTM ZONE 50N Plane Coordinate System (EPSG 32650) with simulated data demonstrate that the LRA-model exhibits high efficiency, high accuracy, and high stability; is simple and easy to use for both forward and inverse transformations; and can be applied to the transformation of a large amount of data with a requirement of high calculation efficiency. Furthermore, the LRA-model exhibits advantages in terms of calculation efficiency, accuracy and stability for coordinate transformations, compared to the widely used hyperbolic transformation model.

  18. A COMPREHENSIVE MODEL FOR THE POWER TRANSFORMER DIGITAL DIFFERENTIAL PROTECTION FUNCTIONING RESEARCH

    OpenAIRE

    Yu. V. Rumiantsev

    2016-01-01

    This article presents a comprehensive model for the two-winding power transformer digital differential protection functioning research. Considered comprehensive model is developed in MatLab-Simulink dynamic simulation environment with the help of SimPowerSystems component library and includes the following elements: power supply, three-phase power transformer, wye-connected current transformers and two-winding power transformer digital differential protection model. Each element of the presen...

  19. The contemporary model of prison architecture: Spatial response to the re-socialization programme

    Directory of Open Access Journals (Sweden)

    Fikfak Alenka

    2015-01-01

    Full Text Available The history of prison architecture concerns the development of various design formats. In contemporary terms, punishment and re-socialization are the two equally important purposes of a prison institution. Rightfully, the contemporary model of prison architecture may be viewed, inter alia, as a spatial response to the re-socialization programme. Based on a comprehensive literature review, critical discussion, and scientific description, this paper defines the main qualitative elements of prison architecture, which responds to the requirements for re-socialization of inmates, and further explains the way in which each response is provided. From these architectural and design attributes, a list of 30 indicators of the spatial response to re-socialization was established. Furthermore, by using the derived indicators, a comparative analysis of four contemporary European prisons was conducted. The results showed both similarities and differences in the spatial response to the re-socialization programme, indicating that the spatial potential for re-socialization of inmates may be developed by using various approaches to prison design.

  20. Modeling suggests that gene circuit architecture controls phenotypic variability in a bacterial persistence network

    Directory of Open Access Journals (Sweden)

    Koh Rachel S

    2012-05-01

    Full Text Available Abstract Background Bacterial persistence is a non-inherited bet-hedging mechanism where a subpopulation of cells enters a dormant state, allowing those cells to survive environmental stress such as treatment with antibiotics. Persister cells are not mutants; they are formed by natural stochastic variation in gene expression. Understanding how regulatory architecture influences the level of phenotypic variability can help us explain how the frequency of persistence events can be tuned. Results We present a model of the regulatory network controlling the HipBA toxin-antitoxin system from Escherichia coli. Using a biologically realistic model we first determine that the persistence phenotype is not the result of bistability within the network. Next, we develop a stochastic model and show that cells can enter persistence due to random fluctuations in transcription, translation, degradation, and complex formation. We then examine alternative gene circuit architectures for controlling hipBA expression and show that networks with more noise (more persisters and less noise (fewer persisters are straightforward to achieve. Thus, we propose that the gene circuit architecture can be used to tune the frequency of persistence, a trait that can be selected for by evolution. Conclusions We develop deterministic and stochastic models describing how the regulation of toxin and antitoxin expression influences phenotypic variation within a population. Persistence events are the result of stochastic fluctuations in toxin levels that cross a threshold, and their frequency is controlled by the regulatory topology governing gene expression.

  1. Transformation of Neural State Space Models into LFT Models for Robust Control Design

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2000-01-01

    This paper considers the extraction of linear state space models and uncertainty models from neural networks trained as state estimators with direct application to robust control. A new method for writing a neural state space model in a linear fractional transformation form in a non...

  2. Discussion on Pipe Model through Hydraulic Architecture of Pinus tabulaeformis Seedling

    Institute of Scientific and Technical Information of China (English)

    ZHAIHongbo; LIJiyue; NIELishui

    2004-01-01

    In the paper, the hydraulic architecture parameters of Pinus tabulaeformis seedlings (4 years old) were measured by improved flushing method under normal water condition in the green house and the basic theory of hydraulic architecture is used to discuss the rationality of the pipe model. The results of the experiment and simulation show that the differences of hydraulic conductivity, specific conductivity and leaf specific conductivity is great in different stems and branches of Pinus tabulaeformis seedlings. The hydraulic conductivity of non-constriction area is higher than that of constriction area. The devotion of functional xylem of stem to unit leaf growth is not a constant, namely, the Huber value is diverse. Even though the pipe model has been accepted in some areas, its precondition is not perfect, and it is helpless in correctly understanding the essence of water transport in seedlings from the prospective of water physiology.

  3. Applying Design Research Artifacts for Building Design Research Artifacts: A Process Model for Enterprise Architecture Planning

    OpenAIRE

    Aier, Stephan; Gleichauf, Bettina

    2010-01-01

    Enterprise architecture (EA) describes the fundamental structure of an organization from business to IT. EA as a practice as well as a research topic has been around for several years. However, existing methods largely neglect the existence of time which is essential in order to systematically approach EA planning. The article at hand builds a process model for EA planning as a de-sign research artifact. We therefore use another more general design research artifact a method for process engi...

  4. Model for supporting awareness in the CSCL ALLEGRO environment through a blackboard architecture

    OpenAIRE

    Demetrio Arturo Ovalle Carranza; Jovani Alberto Jiménez Builes; César Alberto Collazos Ordóñez

    2010-01-01

    This paper is aimed at describing collaborative activities, the awareness process and blackboard architecture used within the ALLEGRO system, a multi-agent learning and teaching environment which has included artificial intelligence mechanisms (instructional planning (IP), cased-based reasoning (CBR), multi-agent systems (MAS), intelligent tutoring systems (ITS) and computer supported collaborative learning (CSCL)). The proposed model of awareness promotes communication, collaboration and co...

  5. A prototype sketch-based architecture modeling system with traditional design habits

    OpenAIRE

    Yu, Jun

    2008-01-01

    Widely used for architectural design, CAD systems such as AutoCAD, 3ds MAX, provide powerful modeling functionality. However, they are often too complex for an architect to use, especially during the conceptualization stage involving primarily sketching of design ideas. Also, interactions with conventional CAD systems are typically driven by mouse and keyboard, but these devices cannot be used as freely as a pencil. For an architect, a tabletPC with stylus provides an ideal interface for desi...

  6. Collaborative Decision Making: Complementary Developments of a Model and an Architecture as a Tool Support

    OpenAIRE

    Jankovic, Marija; ZARATÉ, Pascale; Bocquet, Jean-Claude; Stal-Le Cardinal, Julie

    2009-01-01

    Cardinal (2009). "Collaborative Decision Making: Complementary Developments of a Model and an Architecture as a Tool Support." International Journal of Decision Support System Technology (IJDSST) 1(1): 35-45. ABSTRACT. Recent years we can hear a lot about cooperative decision-making, group or collaborative decision-making. These types of decisions are the consequences of developed working conditions: geographical dispersion, team working, and concurrent working. In the paper we present two re...

  7. Strengthening Architectures of Smart CPS by Modeling them as Runtime Product-Lines

    Czech Academy of Sciences Publication Activity Database

    Bureš, Tomáš; Hnětynka, P.; Plášil, F.

    New York: ACM, 2014, s. 91-96. ISBN 978-1-4503-2577-6. [CBSE 2014. International ACM Sigsoft symposium on Component-based software engineering /17./. Lille (FR), 30.06.2014-03.07.2014] EU Projects: European Commission(XE) ASCENS 257414 Keywords : component-based development * component model * cyber-physical systems * software architecture * software components Subject RIV: JC - Computer Hardware ; Software

  8. Publishing biomedical journals on the World-Wide Web using an open architecture model.

    OpenAIRE

    Shareck, E. P.; Greenes, R. A.

    1996-01-01

    BACKGROUND: In many respects, biomedical publications are ideally suited for distribution via the World-Wide Web, but economic concerns have prevented the rapid adoption of an on-line publishing model. PURPOSE: We report on our experiences with assisting biomedical journals in developing an online presence, issues that were encountered, and methods used to address these issues. Our approach is based on an open architecture that fosters adaptation and interconnection of biomedical resources. M...

  9. A functional–structural kiwifruit vine model integrating architecture, carbon dynamics and effects of the environment

    Science.gov (United States)

    Cieslak, Mikolaj; Seleznyova, Alla N.; Hanan, Jim

    2011-01-01

    Background and Aims Functional–structural modelling can be used to increase our understanding of how different aspects of plant structure and function interact, identify knowledge gaps and guide priorities for future experimentation. By integrating existing knowledge of the different aspects of the kiwifruit (Actinidia deliciosa) vine's architecture and physiology, our aim is to develop conceptual and mathematical hypotheses on several of the vine's features: (a) plasticity of the vine's architecture; (b) effects of organ position within the canopy on its size; (c) effects of environment and horticultural management on shoot growth, light distribution and organ size; and (d) role of carbon reserves in early shoot growth. Methods Using the L-system modelling platform, a functional–structural plant model of a kiwifruit vine was created that integrates architectural development, mechanistic modelling of carbon transport and allocation, and environmental and management effects on vine and fruit growth. The branching pattern was captured at the individual shoot level by modelling axillary shoot development using a discrete-time Markov chain. An existing carbon transport resistance model was extended to account for several source/sink components of individual plant elements. A quasi-Monte Carlo path-tracing algorithm was used to estimate the absorbed irradiance of each leaf. Key Results Several simulations were performed to illustrate the model's potential to reproduce the major features of the vine's behaviour. The model simulated vine growth responses that were qualitatively similar to those observed in experiments, including the plastic response of shoot growth to local carbon supply, the branching patterns of two Actinidia species, the effect of carbon limitation and topological distance on fruit size and the complex behaviour of sink competition for carbon. Conclusions The model is able to reproduce differences in vine and fruit growth arising from various

  10. Development of Groundwater Modeling Support System Based on Service-Oriented Architecture

    Science.gov (United States)

    WANG, Y.; Tsai, J. P.; Hsiao, C. T.; Chang, L. C.

    2014-12-01

    Groundwater simulation has become an essential step on the groundwater resources management and assessment. There are many stand-alone pre and post processing software packages to alleviate the model simulation loading, but the stand-alone software do not consider centralized management of data and simulation results neither do they provide network sharing function. The model buildings are still implemented independently case to case when using these packages. Hence, it is difficult to share and reuse the data and knowledge (simulation cases) systematically within or across companies. Therefore, this study develops a centralized and network based groundwater model developing system to assist model simulation. The system is based on service-oriented architecture and allows remote user to develop their modeling cases on internet. The data and cases (knowledge) are thus easy to manage centralized. MODFLOW is the modeling engine of the system, which is the most popular groundwater model in the world. Other functions include the database management and variety of model developing assisted web services including auto digitalizing of geology profile map、groundwater missing data recovery assisting、graphic data demonstration and auto generation of MODFLOW input files from database that is the most important function of the system. Since the system architecture is service-oriented, it is scalable and flexible. The system can be easily extended to include the scenarios analysis and knowledge management to facilitate the reuse of groundwater modeling knowledge.

  11. A Real-Time Model-Based Reinforcement Learning Architecture for Robot Control

    CERN Document Server

    Hester, Todd; Stone, Peter

    2011-01-01

    Reinforcement Learning (RL) is a method for learning decision-making tasks that could enable robots to learn and adapt to their situation on-line. For an RL algorithm to be practical for robotic control tasks, it must learn in very few actions, while continually taking those actions in real-time. Existing model-based RL methods learn in relatively few actions, but typically take too much time between each action for practical on-line learning. In this paper, we present a novel parallel architecture for model-based RL that runs in real-time by 1) taking advantage of sample-based approximate planning methods and 2) parallelizing the acting, model learning, and planning processes such that the acting process is sufficiently fast for typical robot control cycles. We demonstrate that algorithms using this architecture perform nearly as well as methods using the typical sequential architecture when both are given unlimited time, and greatly out-perform these methods on tasks that require real-time actions such as c...

  12. Integrating microarray gene expression object model and clinical document architecture for cancer genomics research.

    Science.gov (United States)

    Park, Yu Rang; Lee, Hye Won; Kim, Ju Han

    2005-01-01

    Systematic integration of genomic-scale expression profiles with clinical information may facilitate cancer genomics research. MAGE-OM (Microarray Gene Expression Object Model) defines standard objects for genomic but not for clinical data. HL7 CDA (Clinical Document Architecture) is a document model for clinical information, describing syntax (generic structure) but not semantics. We designed a document template in XML Schema with additional constraints for CDA to define content semantics, enabling data model-level integration of MAGE-OM and CDA for cancer genomics research. PMID:16779360

  13. Software Architecture: Architecture Constraints

    OpenAIRE

    Tibermacine, Chouki

    2014-01-01

    International audience In this chapter, we introduce an additional, yet essential, concept in describing software architectures : architecture constraints. We explain the precise role of these entities and their importance in object-oriented, component-based or service-oriented software engi-neering. We then describe the way in which they are specified and interpreted. An architect can define architecture constraints and then associate them to architectural descriptions to limit their stru...

  14. TRANSFORMER MODELLING AND INFLUENTIAL PARAMETERS IDENTIFICATION FOR GEOMAGNETIC DISTURBANCES EVENTS

    OpenAIRE

    Zhang, Rui

    2012-01-01

    Power transformers are a key element in the transmission and distribution of electrical energy and as such need to be highly reliable and efficient. In power system networks, transformer core saturation can cause system voltage disturbances or transformer damage or accelerate insulation ageing. Low frequency switching transients such as ferroresonance and inrush currents, and increasingly what is now known as geomagnetic induce currents (GIC), are the most common phenomena to cause transforme...

  15. How do architecture patterns and tactics interact? A model and annotation

    NARCIS (Netherlands)

    Harrison, Neil B.; Avgeriou, Paris

    2010-01-01

    Software architecture designers inevitably work with both architecture patterns and tactics. Architecture patterns describe the high-level structure and behavior of software systems as the solution to multiple system requirements, whereas tactics are design decisions that improve individual quality

  16. Architecture on Architecture

    DEFF Research Database (Denmark)

    Olesen, Karen

    2016-01-01

    how recognising the autonomy of architecture, not as an esoteric concept but as a valid source of information in a pragmatic design practice, may help us overcome the often-proclaimed dichotomy between formal autonomy and a societally committed architecture. It follows that in architectural education...

  17. From Physics Model to Results: An Optimizing Framework for Cross-Architecture Code Generation

    CERN Document Server

    Blazewicz, Marek; Koppelman, David M; Brandt, Steven R; Ciznicki, Milosz; Kierzynka, Michal; Löffler, Frank; Tao, Jian

    2013-01-01

    Starting from a high-level problem description in terms of partial differential equations using abstract tensor notation, the Chemora framework discretizes, optimizes, and generates complete high performance codes for a wide range of compute architectures. Chemora extends the capabilities of Cactus, facilitating the usage of large-scale CPU/GPU systems in an efficient manner for complex applications, without low-level code tuning. Chemora achieves parallelism through MPI and multi-threading, combining OpenMP and CUDA. Optimizations include high-level code transformations, efficient loop traversal strategies, dynamically selected data and instruction cache usage strategies, and JIT compilation of GPU code tailored to the problem characteristics. The discretization is based on higher-order finite differences on multi-block domains. Chemora's capabilities are demonstrated by simulations of black hole collisions. This problem provides an acid test of the framework, as the Einstein equations contain hundreds of va...

  18. From Physics Model to Results: An Optimizing Framework for Cross-Architecture Code Generation

    Directory of Open Access Journals (Sweden)

    Marek Blazewicz

    2013-01-01

    Full Text Available Starting from a high-level problem description in terms of partial differential equations using abstract tensor notation, the Chemora framework discretizes, optimizes, and generates complete high performance codes for a wide range of compute architectures. Chemora extends the capabilities of Cactus, facilitating the usage of large-scale CPU/GPU systems in an efficient manner for complex applications, without low-level code tuning. Chemora achieves parallelism through MPI and multi-threading, combining OpenMP and CUDA. Optimizations include high-level code transformations, efficient loop traversal strategies, dynamically selected data and instruction cache usage strategies, and JIT compilation of GPU code tailored to the problem characteristics. The discretization is based on higher-order finite differences on multi-block domains. Chemora's capabilities are demonstrated by simulations of black hole collisions. This problem provides an acid test of the framework, as the Einstein equations contain hundreds of variables and thousands of terms.

  19. Combining Wavelet Transform and Hidden Markov Models for ECG Segmentation

    Directory of Open Access Journals (Sweden)

    Jérôme Boudy

    2007-01-01

    Full Text Available This work aims at providing new insights on the electrocardiogram (ECG segmentation problem using wavelets. The wavelet transform has been originally combined with a hidden Markov models (HMMs framework in order to carry out beat segmentation and classification. A group of five continuous wavelet functions commonly used in ECG analysis has been implemented and compared using the same framework. All experiments were realized on the QT database, which is composed of a representative number of ambulatory recordings of several individuals and is supplied with manual labels made by a physician. Our main contribution relies on the consistent set of experiments performed. Moreover, the results obtained in terms of beat segmentation and premature ventricular beat (PVC detection are comparable to others works reported in the literature, independently of the type of the wavelet. Finally, through an original concept of combining two wavelet functions in the segmentation stage, we achieve our best performances.

  20. Combining Wavelet Transform and Hidden Markov Models for ECG Segmentation

    Science.gov (United States)

    Andreão, Rodrigo Varejão; Boudy, Jérôme

    2006-12-01

    This work aims at providing new insights on the electrocardiogram (ECG) segmentation problem using wavelets. The wavelet transform has been originally combined with a hidden Markov models (HMMs) framework in order to carry out beat segmentation and classification. A group of five continuous wavelet functions commonly used in ECG analysis has been implemented and compared using the same framework. All experiments were realized on the QT database, which is composed of a representative number of ambulatory recordings of several individuals and is supplied with manual labels made by a physician. Our main contribution relies on the consistent set of experiments performed. Moreover, the results obtained in terms of beat segmentation and premature ventricular beat (PVC) detection are comparable to others works reported in the literature, independently of the type of the wavelet. Finally, through an original concept of combining two wavelet functions in the segmentation stage, we achieve our best performances.

  1. Research on Object Model-Based Architecture for Service Robot System

    Institute of Scientific and Technical Information of China (English)

    邵鹏鸣; 李成刚; 吴翰声

    2002-01-01

    An object model-based software architecture for service robot system is presented, which addresses both software engineering issues such as reuse, extensibility, and management of complexity as well as system engineering issues like scalability, reactivity, and robustness. A novel approach to the service robot system architecture is discussed. Cognitive psychology is considered in designing the software system, i.e., a humans way of vision and planning is applied. The planner can incorporate the users request into its task selection mechanism and generate plans biased toward picking the most reliable task execution in a given situation, and the planner can alter task selection based on changes that occur in dynamic and uncertain environments.

  2. Model of the reliability analysis of the distributed computer systems with architecture "client-server"

    Science.gov (United States)

    Kovalev, I. V.; Zelenkov, P. V.; Karaseva, M. V.; Tsarev, M. Yu; Tsarev, R. Yu

    2015-01-01

    The paper considers the problem of the analysis of distributed computer systems reliability with client-server architecture. A distributed computer system is a set of hardware and software for implementing the following main functions: processing, storage, transmission and data protection. This paper discusses the distributed computer systems architecture "client-server". The paper presents the scheme of the distributed computer system functioning represented as a graph where vertices are the functional state of the system and arcs are transitions from one state to another depending on the prevailing conditions. In reliability analysis we consider such reliability indicators as the probability of the system transition in the stopping state and accidents, as well as the intensity of these transitions. The proposed model allows us to obtain correlations for the reliability parameters of the distributed computer system without any assumptions about the distribution laws of random variables and the elements number in the system.

  3. ADAPTIVE TCHEBICHEF MOMENT TRANSFORM IMAGE COMPRESSION USING PSYCHOVISUAL MODEL

    Directory of Open Access Journals (Sweden)

    Ferda Ernawan

    2013-01-01

    Full Text Available An extension of the standard JPEG image compression known as JPEG-3 allows rescaling of the quantization matrix to achieve a certain image output quality. Recently, Tchebichef Moment Transform (TMT has been introduced in the field of image compression. TMT has been shown to perform better than the standard JPEG image compression. This study presents an adaptive TMT image compression. This task is obtained by generating custom quantization tables for low, medium and high image output quality levels based on a psychovisual model. A psychovisual model is developed to approximate visual threshold on Tchebichef moment from image reconstruction error. The contribution of each moment will be investigated and analyzed in a quantitative experiment. The sensitivity of TMT basis functions can be measured by evaluating their contributions to image reconstruction for each moment order. The psychovisual threshold model allows a developer to design several custom TMT quantization tables for a user to choose from according to his or her target output preference. Consequently, these quantization tables produce lower average bit length of Huffman code while still retaining higher image quality than the extended JPEG scaling scheme.

  4. Agent-based Extensions for the UML Profile for Service-Oriented Architectures (UPMS-A)

    OpenAIRE

    2008-01-01

    Service-Oriented Architectures are today’s favorite answer to solve interoperability issues. As various kinds of systems can be used to implement Service-Oriented Architectures, the recent trend is to apply principles of Model-Driven Development by (i) modeling the Service-Oriented Architecture in an abstract manner and (ii) providing model transformations between this abstract specification and the underlying platform specific systems. As such, Multi-Agent Systems (MASs) became very popu...

  5. Reconciling root plasticity and architectural ground rules in tree root growth models with voxel automata

    OpenAIRE

    Mulia, Rachmat; Dupraz, Christian; van Noordwijk, Meine

    2010-01-01

    Dynamic models of tree root growth and function have to reconcile the architectural rules for coarse root topology with the dynamics of fine root growth (and decay) in order to predict the strategic plus opportunistic behaviour of a tree root system in a heterogeneous soil. We present an algorithm for a 3D model based on both local (soil voxel level) and global (tree level) controls of root growth, with development of structural roots as a consequence of fine root function, rather than as dri...

  6. Emotional Belief-Desire-Intention Agent Model: Previous Work And Proposed Architecture

    Directory of Open Access Journals (Sweden)

    Mihaela- Alexandra Puica

    2013-02-01

    Full Text Available Research in affective computing shows that agents cannot be truly intelligent, nor believable or realistic without emotions. In this paper, we present a model of emotional agents that is based on a BDI architecture. We show how we can integrate emotions, resources and personality features into an artificial intelligent agent so as to obtain a human-like behavior of this agent. We place our work in the general context of existing research in emotional agents, with emphasis on BDI emotional models.

  7. Modeling the Office of Science Ten Year Facilities Plan: The PERI Architecture Team

    Energy Technology Data Exchange (ETDEWEB)

    de Supinski, Bronis R. [Lawrence Livermore National Laboratory (LLNL); Alam, Sadaf R [ORNL; Bailey, David [Lawrence Berkeley National Laboratory (LBNL); Carrington, Laura [University of California, San Diego; Daley, Christopher [University of Chicago; Dubey, Anshu [University of Chicago; Gamblin, Todd [Lawrence Livermore National Laboratory (LLNL); Gunter, Dan [Lawrence Berkeley National Laboratory (LBNL); Hovland, Paul [Argonne National Laboratory (ANL); Jagode, Heike [ORNL; Karavanic, Karen [Portland State University; Marin, Gabriel [ORNL; Mellor-Crummey, John [Rice University; Moore, Shirley [University of Tennessee, Knoxville (UTK); Norris, Boyana [Argonne National Laboratory (ANL); Oliker, Leonid [Lawrence Berkeley National Laboratory (LBNL); Olschanowsky, Cathy [San Diego Supercomputer Center; Roth, Philip C [ORNL; Schulz, Martin [Lawrence Livermore National Laboratory (LLNL); Shende, Sameer [University of Oregon; Snavely, Allan [University of California, San Diego; Spea, Wyatt [University of Oregon; Tikir, Mustafa [San Diego Supercomputer Center; Vetter, Jeffrey S [ORNL; Worley, Patrick H [ORNL; Wright, Nicholas [San Diego Supercomputer Center

    2009-01-01

    The Performance Engineering Institute (PERI) originally proposed a tiger team activity as a mechanism to target significant effort optimizing key Office of Science applications, a model that was successfully realized with the assistance of two JOULE metric teams. However, the Office of Science requested a new focus beginning in 2008: assistance in forming its ten year facilities plan. To meet this request, PERI formed the Architecture Tiger Team, which is modeling the performance of key science applications on future architectures, with S3D, FLASH and GTC chosen as the first application targets. In this activity, we have measured the performance of these applications on current systems in order to understand their baseline performance and to ensure that our modeling activity focuses on the right versions and inputs of the applications. We have applied a variety of modeling techniques to anticipate the performance of these applications on a range of anticipated systems. While our initial findings predict that Office of Science applications will continue to perform well on future machines from major hardware vendors, we have also encountered several areas in which we must extend our modeling techniques in order to fulfilll our mission accurately and completely. In addition, we anticipate that models of a wider range of applications will reveal critical differences between expected future systems, thus providing guidance for future Office of Science procurement decisions, and will enable DOE applications to exploit machines in future facilities fully.

  8. Modeling the Office of Science Ten Year Facilities Plan: The PERI Architecture Tiger Team

    Energy Technology Data Exchange (ETDEWEB)

    de Supinski, Bronis R.; Alam, Sadaf; Bailey, David H.; Carrington, Laura; Daley, Chris; Dubey, Anshu; Gamblin, Todd; Gunter, Dan; Hovland, Paul D.; Jagode, Heike; Karavanic, Karen; Marin, Gabriel; Mellor-Crummey, John; Moore, Shirley; Norris, Boyana; Oliker, Leonid; Olschanowsky, Catherine; Roth, Philip C.; Schulz, Martin; Shende, Sameer; Snavely, Allan; Spear, Wyatt; Tikir, Mustafa; Vetter, Jeff; Worley, Pat; Wright, Nicholas

    2009-06-26

    The Performance Engineering Institute (PERI) originally proposed a tiger team activity as a mechanism to target significant effort optimizing key Office of Science applications, a model that was successfully realized with the assistance of two JOULE metric teams. However, the Office of Science requested a new focus beginning in 2008: assistance in forming its ten year facilities plan. To meet this request, PERI formed the Architecture Tiger Team, which is modeling the performance of key science applications on future architectures, with S3D, FLASH and GTC chosen as the first application targets. In this activity, we have measured the performance of these applications on current systems in order to understand their baseline performance and to ensure that our modeling activity focuses on the right versions and inputs of the applications. We have applied a variety of modeling techniques to anticipate the performance of these applications on a range of anticipated systems. While our initial findings predict that Office of Science applications will continue to perform well on future machines from major hardware vendors, we have also encountered several areas in which we must extend our modeling techniques in order to fulfill our mission accurately and completely. In addition, we anticipate that models of a wider range of applications will reveal critical differences between expected future systems, thus providing guidance for future Office of Science procurement decisions, and will enable DOE applications to exploit machines in future facilities fully.

  9. Modeling the Office of Science Ten Year FacilitiesPlan: The PERI Architecture Tiger Team

    Energy Technology Data Exchange (ETDEWEB)

    de Supinski, B R; Alam, S R; Bailey, D H; Carrington, L; Daley, C

    2009-05-27

    The Performance Engineering Institute (PERI) originally proposed a tiger team activity as a mechanism to target significant effort to the optimization of key Office of Science applications, a model that was successfully realized with the assistance of two JOULE metric teams. However, the Office of Science requested a new focus beginning in 2008: assistance in forming its ten year facilities plan. To meet this request, PERI formed the Architecture Tiger Team, which is modeling the performance of key science applications on future architectures, with S3D, FLASH and GTC chosen as the first application targets. In this activity, we have measured the performance of these applications on current systems in order to understand their baseline performance and to ensure that our modeling activity focuses on the right versions and inputs of the applications. We have applied a variety of modeling techniques to anticipate the performance of these applications on a range of anticipated systems. While our initial findings predict that Office of Science applications will continue to perform well on future machines from major hardware vendors, we have also encountered several areas in which we must extend our modeling techniques in order to fulfill our mission accurately and completely. In addition, we anticipate that models of a wider range of applications will reveal critical differences between expected future systems, thus providing guidance for future Office of Science procurement decisions, and will enable DOE applications to exploit machines in future facilities fully.

  10. Modeling the Office of Science ten year facilities plan: The PERI Architecture Tiger Team

    International Nuclear Information System (INIS)

    The Performance Engineering Institute (PERI) originally proposed a tiger team activity as a mechanism to target significant effort optimizing key Office of Science applications, a model that was successfully realized with the assistance of two JOULE metric teams. However, the Office of Science requested a new focus beginning in 2008: assistance in forming its ten year facilities plan. To meet this request, PERI formed the Architecture Tiger Team, which is modeling the performance of key science applications on future architectures, with S3D, FLASH and GTC chosen as the first application targets. In this activity, we have measured the performance of these applications on current systems in order to understand their baseline performance and to ensure that our modeling activity focuses on the right versions and inputs of the applications. We have applied a variety of modeling techniques to anticipate the performance of these applications on a range of anticipated systems. While our initial findings predict that Office of Science applications will continue to perform well on future machines from major hardware vendors, we have also encountered several areas in which we must extend our modeling techniques in order to fulfill our mission accurately and completely. In addition, we anticipate that models of a wider range of applications will reveal critical differences between expected future systems, thus providing guidance for future Office of Science procurement decisions, and will enable DOE applications to exploit machines in future facilities fully.

  11. LinTraP: Primitive Operators for the Execution of Model Transformations with LinTra

    OpenAIRE

    Burgueño, Loli; Syriani, Eugene; Wimmer, Manuel; Gray, Jeff; Moreno Vallecillo, Antonio

    2014-01-01

    The problems addressed by Model-Driven Engineering (MDE) approaches are increasingly complex, hence performance and scalability of model transformations are gaining importance. In previous work, we introduced LinTra, which is a platform for executing out-place model transformations in parallel. The parallel execution of LinTra is based on the Linda coordination language, where high-level model transformation languages (MTLs) are compiled to LinTra and eventually executed through Linda. ...

  12. Primitive Operators for the Concurrent Execution of Model Transformations Based on LinTra

    OpenAIRE

    Burgueño, Loli; Syriani, Eugene; Wimmer, Manuel; Gray, Jeff; Vallecillo, Antonio

    2014-01-01

    Performance and scalability of model transformations are becoming prominent topics in Model-Driven Engineering. In previous work, we introduced LinTra, a platform for executing out-place model transformations in parallel. LinTra is based on the Linda coordination language for archiving concurrency and distribution and is intended to be used as a middleware where high-level model transformation languages (such as ATL and QVT) are compiled. To define modularly the compilation, this paper presen...

  13. Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling: Porosity-Permeability Relations Revisited

    Institute of Scientific and Technical Information of China (English)

    J A Vargas-Guzmán

    2008-01-01

    An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.

  14. “Pushing the Envelope” a modeling-based approach to the development of organic, responsive architectural form

    OpenAIRE

    David Yearley

    2012-01-01

    This paper tests design procedures for the development of complex, organic architectural forms. It illustrates a postgraduate student design process, implementing a development sequence based on the intelligent manipulation of architectural envelopes using a variety of existing modeling tools and emerging digital techniques. These stages of development respond to imposed spatial and environmental constraints. The tests began with full-scale modeling of small segments. The major constraints at...

  15. Modeling human endothelial cell transformation in vascular neoplasias

    Directory of Open Access Journals (Sweden)

    Victoria W. Wen

    2013-09-01

    Full Text Available Endothelial cell (EC-derived neoplasias range from benign hemangioma to aggressive metastatic angiosarcoma, which responds poorly to current treatments and has a very high mortality rate. The development of treatments that are more effective for these disorders will be expedited by insight into the processes that promote abnormal proliferation and malignant transformation of human ECs. The study of primary endothelial malignancy has been limited by the rarity of the disease; however, there is potential for carefully characterized EC lines and animal models to play a central role in the discovery, development and testing of molecular targeted therapies for vascular neoplasias. This review describes molecular alterations that have been identified in EC-derived neoplasias, as well as the processes that underpin the immortalization and tumorigenic conversion of ECs. Human EC lines, established through the introduction of defined genetic elements or by culture of primary tumor tissue, are catalogued and discussed in relation to their relevance as models of vascular neoplasia.

  16. Automatic generation of virtual worlds from architectural and mechanical CAD models

    International Nuclear Information System (INIS)

    Accelerator projects like the XFEL or the planned linear collider TESLA involve extensive architectural and mechanical design work, resulting in a variety of CAD models. The CAD models will be showing different parts of the project, like e.g. the different accelerator components or parts of the building complexes, and they will be created and stored by different groups in different formats. A complete CAD model of the accelerator and its buildings is thus difficult to obtain and would also be extremely huge and difficult to handle. This thesis describes the design and prototype development of a tool which automatically creates virtual worlds from different CAD models. The tool will enable the user to select a required area for visualization on a map, and then create a 3D-model of the selected area which can be displayed in a web-browser. The thesis first discusses the system requirements and provides some background on data visualization. Then, it introduces the system architecture, the algorithms and the used technologies, and finally demonstrates the capabilities of the system using two case studies. (orig.)

  17. Performance Evaluation of Parallel Message Passing and Thread Programming Model on Multicore Architectures

    CERN Document Server

    Hasta, D T

    2010-01-01

    The current trend of multicore architectures on shared memory systems underscores the need of parallelism. While there are some programming model to express parallelism, thread programming model has become a standard to support these system such as OpenMP, and POSIX threads. MPI (Message Passing Interface) which remains the dominant model used in high-performance computing today faces this challenge. Previous version of MPI which is MPI-1 has no shared memory concept, and Current MPI version 2 which is MPI-2 has a limited support for shared memory systems. In this research, MPI-2 version of MPI will be compared with OpenMP to see how well does MPI perform on multicore / SMP (Symmetric Multiprocessor) machines. Comparison between OpenMP for thread programming model and MPI for message passing programming model will be conducted on multicore shared memory machine architectures to see who has a better performance in terms of speed and throughput. Application used to assess the scalability of the evaluated parall...

  18. Reduction of false positives in the detection of architectural distortion in mammograms by using a geometrically constrained phase portrait model

    International Nuclear Information System (INIS)

    Objective One of the commonly missed signs of breast cancer is architectural distortion. We have developed techniques for the detection of architectural distortion in mammograms, based on the analysis of oriented texture through the application of Gabor filters and a linear phase portrait model. In this paper, we propose constraining the shape of the general phase portrait model as a means to reduce the false-positive rate in the detection of architectural distortion. Material and methods The methods were tested with one set of 19 cases of architectural distortion and 41 normal mammograms, and with another set of 37 cases of architectural distortion. Results Sensitivity rates of 84% with 4.5 false positives per image and 81% with 10 false positives per image were obtained for the two sets of images. Conclusion The adoption of a constrained phase portrait model with a symmetric matrix and the incorporation of its condition number in the analysis resulted in a reduction in the false-positive rate in the detection of architectural distortion. The proposed techniques, dedicated for the detection and localization of architectural distortion, should lead to efficient detection of early signs of breast cancer. (orig.)

  19. Survey on Efficient Linear Solvers for Porous Media Flow Models on Recent Hardware Architectures

    Directory of Open Access Journals (Sweden)

    Anciaux-Sedrakian Ani

    2014-07-01

    Full Text Available In the past few years, High Performance Computing (HPC technologies led to General Purpose Processing on Graphics Processing Units (GPGPU and many-core architectures. These emerging technologies offer massive processing units and are interesting for porous media flow simulators may used for CO2 geological sequestration or Enhanced Oil Recovery (EOR simulation. However the crucial point is “are current algorithms and software able to use these new technologies efficiently?” The resolution of large sparse linear systems, almost ill-conditioned, constitutes the most CPU-consuming part of such simulators. This paper proposes a survey on various solver and preconditioner algorithms, analyzes their efficiency and performance regarding these distinct architectures. Furthermore it proposes a novel approach based on a hybrid programming model for both GPU and many-core clusters. The proposed optimization techniques are validated through a Krylov subspace solver; BiCGStab and some preconditioners like ILU0 on GPU, multi-core and many-core architectures, on various large real study cases in EOR simulation.

  20. Survey on efficient linear solvers for porous media flow models on recent hardware architectures

    International Nuclear Information System (INIS)

    In the past few years, High Performance Computing (HPC) technologies led to General Purpose Processing on Graphics Processing Units (GPGPU) and many-core architectures. These emerging technologies offer massive processing units and are interesting for porous media flow simulators may used for CO2 geological sequestration or Enhanced Oil Recovery (EOR) simulation. However the crucial point is 'are current algorithms and software able to use these new technologies efficiently?' The resolution of large sparse linear systems, almost ill-conditioned, constitutes the most CPU-consuming part of such simulators. This paper proposes a survey on various solver and pre-conditioner algorithms, analyzes their efficiency and performance regarding these distinct architectures. Furthermore it proposes a novel approach based on a hybrid programming model for both GPU and many-core clusters. The proposed optimization techniques are validated through a Krylov subspace solver; BiCGStab and some pre-conditioners like ILU0 on GPU, multi-core and many-core architectures, on various large real study cases in EOR simulation. (authors)

  1. Behavioral Model Architectures: A New Way Of Doing Real-Time Planning In Intelligent Robots

    Science.gov (United States)

    Cassinis, Riccardo; Biroli, Ernesto; Meregalli, Alberto; Scalise, Fabio

    1987-01-01

    Traditional hierarchical robot control systems, although well suited for manufacturing applications, appear to be inefficient for innovative applications, such as mobile robots. The research we present aims to the development of a new architecture, designed to overcome actual limitations. The control system was named BARCS (Behavioral Architecture Robot Control System). It is composed of several modules, that exchange information through a blackboard. The original point is that the functions of the modules were selected according to a behavioral rather than a functional decomposition model. Therefore, the system includes, among other, purpose, strategy, movement, sensor handling and safety modules. Both the hardware structure and the logical decomposition allow a great freedom in the design of each module and of the connections between modules, that have to be as flexible and efficient as possible. In order to obtain an "intelligent" behavior, a mixture of traditional programming, artificial intelligence techniques and fuzzy logic are used, according to the needs of each moddle. The approach is particularly interesting because the robot can be quite easily "specialized", i.e. it can be given behaviors and problem solving strategies that suit some applications better than other. Another interesting aspect of the proposed architecture is that sensor information handling and fusion can be dynamically tailored to the robot's situation, thus eliminating all time-consuming useless processing.

  2. Multi-scale modeling of the iron bcc arrow hcp martensitic phase transformation

    Science.gov (United States)

    Caspersen, Kyle; Carter, Emily; Lew, Adrian; Ortiz, Michael

    2004-03-01

    Pressures exceeding 10 GPa induce a martensitic phase transformation in iron, where ferro-magnetic bcc transforms into non-magnetic hcp. The transition pressure is not known precisely, but is thought to depend strongly on shear. To investigate the properties of this transformation and the role of shear, we have developed a multi-scale iron model. This model contains a free energy derived from an ab-initio based non-linear elastic expansion, a kinematically compatible spinodal decomposition of phases, ab-initio based interfacial energies, and a dependence on the bcc rightarrow hcp transformation path(s). The model shows spinodal decomposition behavior (with a slight expected deviation) as well as predicting 10 GPa to be the transformation pressure. Additionally, the model predicted that the inclusion of shear facilitates the transformation, causing transformation pressure to decrease.

  3. Distribution of the Object Oriented Databases. A Viewpoint of the MVDB Model's Methodology and Architecture

    Directory of Open Access Journals (Sweden)

    Marian Pompiliu CRISTESCU

    2008-01-01

    Full Text Available In databases, much work has been done towards extending models with advanced tools such as view technology, schema evolution support, multiple classification, role modeling and viewpoints. Over the past years, most of the research dealing with the object multiple representation and evolution has proposed to enrich the monolithic vision of the classical object approach in which an object belongs to one hierarchy class. In particular, the integration of the viewpoint mechanism to the conventional object-oriented data model gives it flexibility and allows one to improve the modeling power of objects. The viewpoint paradigm refers to the multiple descriptions, the distribution, and the evolution of object. Also, it can be an undeniable contribution for a distributed design of complex databases. The motivation of this paper is to define an object data model integrating viewpoints in databases and to present a federated database architecture integrating multiple viewpoint sources following a local-as-extended-view data integration approach.

  4. Workshare Process of Thread Programming and MPI Model on Multicore Architecture

    Directory of Open Access Journals (Sweden)

    R. Refianti

    2011-08-01

    Full Text Available Comparison between OpenMP for thread programming model and MPI for message passing programming model will be conducted on multicore shared memory machine architectures in order to find which has a better performance in terms of speed and throughput. Application used to assess the scalability of the evaluated parallel programming solutions is matrix multiplication with customizable matrix dimension. Many research done on a large scale parallel computing which using high scale benchmark such as NSA Parallel Benchmark (NPB for their testing standardization [2]. This research will be conducted on a small scale parallel computing that emphasize more on the performance evaluation between MPI and OpenMP parallel programming model using self created benchmark. It also describes how workshare processes done on different parallel programming model. It gives comparative result between message passing and shared memory programming model in runtime and amount of throughput. Testing methodology also simple and has high usability on the available resources.

  5. Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels

    NARCIS (Netherlands)

    Geijselaers, H.J.M.; Hilkhuijsen, P.; Bor, T.C.; Perdahcioglu, E.S.; Boogaard, van den A.H.; Zhang, S.-H.; Liu, X.-H.; Gheng, M.; Li, J.

    2013-01-01

    The transformation of austenite to martensite is a dominant factor in the description of the constitutive behavior during forming of TRIP assisted steels. To predict this transformation different models are currently available. In this paper the transformation is regarded as a stress induced process

  6. Rule-based modularization in model transformation languages illustrated with ATL

    NARCIS (Netherlands)

    Kurtev, Ivan; Berg, van den Klaas G.; Jouault, Frédéric

    2007-01-01

    This paper studies ways for modularizing transformation definitions in current rule-based model transformation languages. Two scenarios are shown in which the modular units are identified on the basis of relations between source and target metamodels and on the base of generic transformation functio

  7. Investigating the genetic architecture of conditional strategies using the environmental threshold model.

    Science.gov (United States)

    Buzatto, Bruno A; Buoro, Mathieu; Hazel, Wade N; Tomkins, Joseph L

    2015-12-22

    The threshold expression of dichotomous phenotypes that are environmentally cued or induced comprise the vast majority of phenotypic dimorphisms in colour, morphology, behaviour and life history. Modelled as conditional strategies under the framework of evolutionary game theory, the quantitative genetic basis of these traits is a challenge to estimate. The challenge exists firstly because the phenotypic expression of the trait is dichotomous and secondly because the apparent environmental cue is separate from the biological signal pathway that induces the switch between phenotypes. It is the cryptic variation underlying the translation of cue to phenotype that we address here. With a 'half-sib common environment' and a 'family-level split environment' experiment, we examine the environmental and genetic influences that underlie male dimorphism in the earwig Forficula auricularia. From the conceptual framework of the latent environmental threshold (LET) model, we use pedigree information to dissect the genetic architecture of the threshold expression of forceps length. We investigate for the first time the strength of the correlation between observable and cryptic 'proximate' cues. Furthermore, in support of the environmental threshold model, we found no evidence for a genetic correlation between cue and the threshold between phenotypes. Our results show strong correlations between observable and proximate cues and less genetic variation for thresholds than previous studies have suggested. We discuss the importance of generating better estimates of the genetic variation for thresholds when investigating the genetic architecture and heritability of threshold traits. By investigating genetic architecture by means of the LET model, our study supports several key evolutionary ideas related to conditional strategies and improves our understanding of environmentally cued decisions. PMID:26674955

  8. DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER

    Directory of Open Access Journals (Sweden)

    V.V. Vasilevskij

    2016-06-01

    Full Text Available Introduction. An important problem in power transformers resource prognosis is the formation of moisture dynamics trends of transformer insulation. Purpose. Increasing the accuracy of power transformer insulation resource assessment based on accounting of moisture dynamics in interrelation with temperature dynamics. Working out of moisture dynamics model in paper insulation-transformer oil system in conjunction with thermodynamic model, load model and technical maintenance model. Methodology. The mathematical models used for describe the moisture dynamics are grounded on nonlinear differential equations. Interrelation moisture dynamics model with thermodynamic, load and technical maintenance models described by UML model. For confirming the adequacy of model used computer simulation. Results. We have implemented the model of moisture dynamics in power transformers insulation in interrelation with other models, which describe the state of power transformer in operation. The proposed model allows us to form detailed trends of moisture dynamics in power transformers insulation basing on monitoring data or power transformers operational factors simulation results. We have performed computer simulation of moisture exchange processes and calculation of transformer insulation resource for different moisture trends. Originality. The offered model takes into account moisture dynamics in power transformers insulation under the influence of changes of the power transformers thermal mode and operational factors. Practical value. The offered model can be used in power transformers monitoring systems for automation of resource assessment of oil-immersed power transformers paper insulation at different phase of lifecycle. Model also can be used for assessment of projected economic efficiency of power transformers exploitation in projected operating conditions.

  9. Transformation of Neural State Space Models into LFT Models for Robust Control Design

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2000-01-01

    This paper considers the extraction of linear state space models and uncertainty models from neural networks trained as state estimators with direct application to robust control. A new method for writing a neural state space model in a linear fractional transformation form in a non-conservative...... way is proposed, and it is demonstrated how a standard robust control law can be designed for a system described by means of a multi layer perceptron....

  10. A simple three-dimensional macroscopic root water uptake model based on the hydraulic architecture approach

    Directory of Open Access Journals (Sweden)

    V. Couvreur

    2012-08-01

    Full Text Available Many hydrological models including root water uptake (RWU do not consider the dimension of root system hydraulic architecture (HA because explicitly solving water flow in such a complex system is too time consuming. However, they might lack process understanding when basing RWU and plant water stress predictions on functions of variables such as the root length density distribution. On the basis of analytical solutions of water flow in a simple HA, we developed an "implicit" model of the root system HA for simulation of RWU distribution (sink term of Richards' equation and plant water stress in three-dimensional soil water flow models. The new model has three macroscopic parameters defined at the soil element scale, or at the plant scale, rather than for each segment of the root system architecture: the standard sink fraction distribution SSF, the root system equivalent conductance Krs and the compensatory RWU conductance Kcomp. It clearly decouples the process of water stress from compensatory RWU, and its structure is appropriate for hydraulic lift simulation. As compared to a model explicitly solving water flow in a realistic maize root system HA, the implicit model showed to be accurate for predicting RWU distribution and plant collar water potential, with one single set of parameters, in dissimilar water dynamics scenarios. For these scenarios, the computing time of the implicit model was a factor 28 to 214 shorter than that of the explicit one. We also provide a new expression for the effective soil water potential sensed by plants in soils with a heterogeneous water potential distribution, which emerged from the implicit model equations. With the proposed implicit model of the root system HA, new concepts are brought which open avenues towards simple and mechanistic RWU models and water stress functions operational for field scale water dynamics simulation.

  11. A simple three-dimensional macroscopic root water uptake model based on the hydraulic architecture approach

    Directory of Open Access Journals (Sweden)

    V. Couvreur

    2012-04-01

    Full Text Available Many hydrological models including root water uptake (RWU do not consider the dimension of root system hydraulic architecture (HA because explicitly solving water flow in such a complex system is too much time consuming. However, they might lack process understanding when basing RWU and plant water stress predictions on functions of variables such as the root length density distribution. On the basis of analytical solutions of water flow in a simple HA, we developed an "implicit" model of the root system HA for simulation of RWU distribution (sink term of Richards' equation and plant water stress in three-dimensional soil water flow models. The new model has three macroscopic parameters defined at the soil element scale or at the plant scale rather than for each segment of the root architecture: the standard sink distribution SSD, the root system equivalent conductance Krs and the compensatory conductance Kcomp. It clearly decouples the process of water stress from compensatory RWU and its structure is appropriate for hydraulic lift simulation. As compared to a model explicitly solving water flow in a realistic maize root system HA, the implicit model showed to be accurate for predicting RWU distribution and plant collar water potential, with one single set of parameters, in contrasted water dynamics scenarios. For these scenarios, the computing time of the implicit model was a factor 28 to 214 shorter than that of the explicit one. We also provide a new expression for the effective soil water potential sensed by plants in soils with a heterogeneous water potential distribution, which emerged from the implicit model equations. With the proposed implicit model of the root system HA, new concepts are brought which open avenues towards simple and process understanding RWU models and water stress functions operational for field scale water dynamics simulation.

  12. MATA: A Unified Approach for Composing UML Aspect Models Based on Graph Transformation

    Science.gov (United States)

    Whittle, Jon; Jayaraman, Praveen; Elkhodary, Ahmed; Moreira, Ana; Araújo, João

    This paper describes MATA (Modeling Aspects Using a Transformation Approach), a UML aspect-oriented modeling (AOM) technique that uses graph transformations to specify and compose aspects. Graph transformations provide a unified approach for aspect modeling in that the methods presented here can be applied to any modeling language with a well-defined metamodel. This paper, however, focuses on UML class diagrams, sequence diagrams and state diagrams. MATA takes a different approach to AOM since there are no explicit joinpoints. Rather, any model element can be a joinpoint, and composition is a special case of model transformation. The graph transformation execution engine, AGG, is used in MATA to execute model compositions, and critical pair analysis is used to automatically detect structural interactions between different aspect models. MATA has been applied to a number of realistic case studies and is supported by a tool built on top of IBM Rational Software Modeler.

  13. Using Transformation-Aspects in Model-Driven Software Product Lines

    OpenAIRE

    Arboleda, Hugo; Casallas, Rubby; Royer, Jean-Claude

    2009-01-01

    Model-Driven Software Product Lines (MD-SPL) are configured by using configuration models and Problem Space metamodels that capture product line scope. Products are derived by means of successive model transformations, starting from problem space models and based on the configuration models. Fine-variations of MD-SPLs correspond to characteristics that afect particular elements of models involved in the model transformations. In this paper, we present an approach to create MD-SPL including fi...

  14. Model-Driven Development of Reliable Avionics Architectures for Lunar Surface Systems

    Science.gov (United States)

    Borer, Nicholas; Claypool, Ian; Clark, David; West, John; Somervill, Kevin; Odegard, Ryan; Suzuki, Nantel

    2010-01-01

    This paper discusses a method used for the systematic improvement of NASA s Lunar Surface Systems avionics architectures in the area of reliability and fault-tolerance. This approach utilizes an integrated system model to determine the effects of component failure on the system s ability to provide critical functions. A Markov model of the potential degraded system modes is created to characterize the probability of these degraded modes, and the system model is run for each Markov state to determine its status (operational or system loss). The probabilistic results from the Markov model are first produced from state transition rates based on NASA data for heritage failure rate data of similar components. An additional set of probabilistic results are created from a representative set of failure rates developed for this study, for a variety of component quality grades (space-rated, mil-spec, ruggedized, and commercial). The results show that careful application of redundancy and selected component improvement should result in Lunar Surface Systems architectures that exhibit an appropriate degree of fault-tolerance, reliability, performance, and affordability.

  15. BIM-based Modeling and Data Enrichment of Classical Architectural Buildings

    Directory of Open Access Journals (Sweden)

    Fabrizio Ivan Apollonio

    2012-12-01

    Full Text Available EnIn this paper we presented a BIM-based approach for the documentation of Architectural Heritage. Knowledge of classical architecture is first extracted from the treatises for parametric modeling in object level. Then we established a profile library based on semantic studies to sweep out different objects. Variants grow out from the parametric models by editing or regrouping parameters based on grammars. Multiple data including material, structure and real-life state are enriched with respect to different research motivations. The BIM models are expected to ease the modeling process and provide comprehensive data shared among different platforms for further simulations.ItIn questo articolo è presentata una procedura definita nell'ambito dei sistemi BIM con l'obiettivo di documentare il Patrimonio Architettonico. I dati conoscitivi relativi all'architettura classica sono, in una prima fase, ottenuti dai trattati al fine di modellare in maniera parametrica a livello di oggetti. Successivamente è stata definita una libreria di profili, basata su principi semantici, dalla quale è possibile ottenere oggetti differenti. Dati di natura differente, relativi ad esempio ai materiali, alle strutture, allo stato di fatto, sono implementati in funzione delle differenti esigenze. I modelli BIM hanno la potenzialità di facilitare le procedure di modellazione e di fornire informazioni e dati completi che possono essere condivisi tra piattaforme differenti per ulteriori simulazioni ed analisi.

  16. Historic Building Information Modelling - Adding intelligence to laser and image based surveys of European classical architecture

    Science.gov (United States)

    Murphy, Maurice; McGovern, Eugene; Pavia, Sara

    2013-02-01

    Historic Building Information Modelling (HBIM) is a novel prototype library of parametric objects, based on historic architectural data and a system of cross platform programmes for mapping parametric objects onto point cloud and image survey data. The HBIM process begins with remote collection of survey data using a terrestrial laser scanner combined with digital photo modelling. The next stage involves the design and construction of a parametric library of objects, which are based on the manuscripts ranging from Vitruvius to 18th century architectural pattern books. In building parametric objects, the problem of file format and exchange of data has been overcome within the BIM ArchiCAD software platform by using geometric descriptive language (GDL). The plotting of parametric objects onto the laser scan surveys as building components to create or form the entire building is the final stage in the reverse engineering process. The final HBIM product is the creation of full 3D models including detail behind the object's surface concerning its methods of construction and material make-up. The resultant HBIM can automatically create cut sections, details and schedules in addition to the orthographic projections and 3D models (wire frame or textured) for both the analysis and conservation of historic objects, structures and environments.

  17. Model-Based Engine Control Architecture with an Extended Kalman Filter

    Science.gov (United States)

    Csank, Jeffrey T.; Connolly, Joseph W.

    2016-01-01

    This paper discusses the design and implementation of an extended Kalman filter (EKF) for model-based engine control (MBEC). Previously proposed MBEC architectures feature an optimal tuner Kalman Filter (OTKF) to produce estimates of both unmeasured engine parameters and estimates for the health of the engine. The success of this approach relies on the accuracy of the linear model and the ability of the optimal tuner to update its tuner estimates based on only a few sensors. Advances in computer processing are making it possible to replace the piece-wise linear model, developed off-line, with an on-board nonlinear model running in real-time. This will reduce the estimation errors associated with the linearization process, and is typically referred to as an extended Kalman filter. The nonlinear extended Kalman filter approach is applied to the Commercial Modular Aero-Propulsion System Simulation 40,000 (C-MAPSS40k) and compared to the previously proposed MBEC architecture. The results show that the EKF reduces the estimation error, especially during transient operation.

  18. High-Performance Work Systems: American Models of Workplace Transformation.

    Science.gov (United States)

    Appelbaum, Eileen; Batt, Rosemary

    Rising competition in world and domestic markets for the past 2 decades has necessitated that U.S. companies undergo significant transformations to improve their performance with respect to a wide array of efficiency and quality indicators. Research on the transformations recently undertaken by some U.S. companies to boost performance revealed two…

  19. Using compute unified device architecture-enabled graphic processing unit to accelerate fast Fourier transform-based regression Kriging interpolation on a MODIS land surface temperature image

    Science.gov (United States)

    Hu, Hongda; Shu, Hong; Hu, Zhiyong; Xu, Jianhui

    2016-04-01

    Kriging interpolation provides the best linear unbiased estimation for unobserved locations, but its heavy computation limits the manageable problem size in practice. To address this issue, an efficient interpolation procedure incorporating the fast Fourier transform (FFT) was developed. Extending this efficient approach, we propose an FFT-based parallel algorithm to accelerate regression Kriging interpolation on an NVIDIA® compute unified device architecture (CUDA)-enabled graphic processing unit (GPU). A high-performance cuFFT library in the CUDA toolkit was introduced to execute computation-intensive FFTs on the GPU, and three time-consuming processes were redesigned as kernel functions and executed on the CUDA cores. A MODIS land surface temperature 8-day image tile at a resolution of 1 km was resampled to create experimental datasets at eight different output resolutions. These datasets were used as the interpolation grids with different sizes in a comparative experiment. Experimental results show that speedup of the FFT-based regression Kriging interpolation accelerated by GPU can exceed 1000 when processing datasets with large grid sizes, as compared to the traditional Kriging interpolation running on the CPU. These results demonstrate that the combination of FFT methods and GPU-based parallel computing techniques greatly improves the computational performance without loss of precision.

  20. Non-compartment model to compartment model pharmacokinetics transformation meta-analysis – a multivariate nonlinear mixed model

    OpenAIRE

    2010-01-01

    Background To fulfill the model based drug development, the very first step is usually a model establishment from published literatures. Pharmacokinetics model is the central piece of model based drug development. This paper proposed an important approach to transform published non-compartment model pharmacokinetics (PK) parameters into compartment model PK parameters. This meta-analysis was performed with a multivariate nonlinear mixed model. A conditional first-order linearization approach ...