WorldWideScience

Sample records for aqueous two-phase systems

  1. Partitioning of glycomacropeptide in aqueous two-phase systems

    OpenAIRE

    Silva, C. A. S.; Coimbra, Jane Sélia dos Reis; Rojas, Edwin Elard Garcia; Teixeira, J. A.

    2009-01-01

    The partition behavior of glycomacropeptide (GMP) was determined in polyethylene glycol (PEG) and sodium citrate aqueous two-phase systems (ATPS). It was found that the partitioning of GMP depends on PEG molar mass, tie line length, pH, NaCl concentration and temperature. The obtained data indicates that GMP is preferentially partitioned into the PEG phase without addition of NaCl at pH 8.0. Larger tie line lengths and higher temperatures favor GMP partition to the PEG phase. Furt...

  2. Aqueous Two Phase System Assisted Self-Assembled PLGA Microparticles

    Science.gov (United States)

    Yeredla, Nitish; Kojima, Taisuke; Yang, Yi; Takayama, Shuichi; Kanapathipillai, Mathumai

    2016-06-01

    Here, we produce poly(lactide-co-glycolide) (PLGA) based microparticles with varying morphologies, and temperature responsive properties utilizing a Pluronic F127/dextran aqueous two-phase system (ATPS) assisted self-assembly. The PLGA polymer, when emulsified in Pluronic F127/dextran ATPS, forms unique microparticle structures due to ATPS guided-self assembly. Depending on the PLGA concentration, the particles either formed a core-shell or a composite microparticle structure. The microparticles facilitate the simultaneous incorporation of both hydrophobic and hydrophilic molecules, due to their amphiphilic macromolecule composition. Further, due to the lower critical solution temperature (LCST) properties of Pluronic F127, the particles exhibit temperature responsiveness. The ATPS based microparticle formation demonstrated in this study, serves as a novel platform for PLGA/polymer based tunable micro/nano particle and polymersome development. The unique properties may be useful in applications such as theranostics, synthesis of complex structure particles, bioreaction/mineralization at the two-phase interface, and bioseparations.

  3. Aqueous two-phase system based on natural quaternary ammonium compounds for the extraction of proteins.

    Science.gov (United States)

    Zeng, Chao-Xi; Xin, Rui-Pu; Qi, Sui-Jian; Yang, Bo; Wang, Yong-Hua

    2016-02-01

    Aqueous two-phase systems, based on the use of natural quaternary ammonium compounds, were developed to establish a benign biotechnological route for efficient protein separation. In this study, aqueous two-phase systems of two natural resources betaine and choline with polyethyleneglycol (PEG400/600) or inorganic salts (K2 HPO4 /K3 PO4 ) were formed. It was shown that in the K2 HPO4 -containing aqueous two-phase system, hydrophobic interactions were an important driving force of protein partitioning, while protein size played a vital role in aqueous two-phase systems that contained polyethylene glycol. An extraction efficiency of more than 90% for bovine serum albumin in the betaine/K2 HPO4 aqueous two-phase system can be obtained, and this betaine-based aqueous two-phase system provided a gentle and stable environment for the protein. In addition, after investigation of the cluster phenomenon in the betaine/K2 HPO4 aqueous two-phase systems, it was suggested that this phenomenon also played a significant role for protein extraction in this system. The development of aqueous two-phase systems based on natural quaternary ammonium compounds not only provided an effective and greener method of aqueous two-phase system to meet the requirements of green chemistry but also may help to solve the mystery of the compartmentalization of biomolecules in cells. PMID:26447826

  4. Separation of aqueous two-phase polymer systems in microgravity

    Science.gov (United States)

    Vanalstine, J. M.; Harris, J. M.; Synder, S.; Curreri, P. A.; Bamberger, S. B.; Brooks, D. E.

    1984-01-01

    Phase separation of polymer systems in microgravity is studied in aircraft flights to prepare shuttle experiments. Short duration (20 sec) experiments demonstrate that phase separation proceeds rapidly in low gravity despite appreciable phase viscosities and low liquid interfacial tensions (i.e., 50 cP, 10 micro N/m). Ostwald ripening does not appear to be a satisfactory model for the phase separation mechanism. Polymer coated surfaces are evaluated as a means to localize phases separated in low gravity. Contact angle measurements demonstrate that covalently coupling dextran or PEG to glass drastically alters the 1-g wall wetting behavior of the phases in dextran-PEG two phase systems.

  5. Electrostatic interactions and aqueous two-phase separation modes of aqueous mixed oppositely charged surfactants system.

    Science.gov (United States)

    Hao, Li-Sheng; Gui, Yuan-Xiang; Chen, Yan-Mei; He, Shao-Qing; Nan, Yan-Qing; You, Yi-Lan

    2012-08-30

    Electrostatic interactions play an important role in setting the aqueous two-phase separation behaviors of mixtures of oppositely charged surfactants. The aqueous mixture of cetyltrimethylammonium bromide (CTAB) and sodium dodecylsulfonate (AS) is actually a five-component system, comprised of CTAB, AS, complex salt (cetyltrimethylammonium dodecylsulfonate, abbreviated as CTA(+)AS(-)), NaBr, and water. In the three-dimensional pyramid phase diagram, the aqueous two-phase region with excess AS or with excess CTAB extends successively from the region very near to the NaBr-H2O line through the CTAB-AS-H2O conventional mixing plane to the CTA(+)AS(-)-AS-H2O side plane or to the CTA(+)AS(-)-CTAB-H2O side plane, respectively. Large or small molar ratios between the counterions and their corresponding surfactant ions for oppositely charged surfactants located in the NaBr side or the CTA(+)AS(-) side of the pyramid imply strong or weak electrostatic screening. Electrostatic screening of counterions alters the electrostatic attractions between the oppositely charged head groups or the electrostatic repulsions between the like-charged head groups in excess, and the electrostatic free energy of aggregation thus affects the aqueous two-phase separation modes. Composition analysis, rheological property investigation, and TEM images suggest that there are two kinds of aqueous two-phase systems (ATPSs). On the basis of these experimental results and Kaler's cell model, two kinds of phase separation modes were proposed. Experimental results also indicate that all of the top phases are surfactant-rich, and all of the bottom phases are surfactant-poor; the density difference between the top phase and the bottom phase in one ATPS is very small; the interfacial tension (σ) of the ATPS is ultralow. PMID:22856887

  6. Two-phase aqueous micellar systems: an alternative method for protein purification

    Directory of Open Access Journals (Sweden)

    Rangel-Yagui C. O.

    2004-01-01

    Full Text Available Two-phase aqueous micellar systems can be exploited in separation science for the extraction/purification of desired biomolecules. This article reviews recent experimental and theoretical work by Blankschtein and co-workers on the use of two-phase aqueous micellar systems for the separation of hydrophilic proteins. The experimental partitioning behavior of the enzyme glucose-6-phosphate dehydrogenase (G6PD in two-phase aqueous micellar systems is also reviewed and new results are presented. Specifically, we discuss very recent work on the purification of G6PD using: i a two-phase aqueous micellar system composed of the nonionic surfactant n-decyl tetra(ethylene oxide (C10E4, and (ii a two-phase aqueous mixed micellar system composed of C10E4 and the cationic surfactant decyltrimethylammonium bromide (C10TAB. Our results indicate that the two-phase aqueous mixed (C10E4/C10TAB micellar system can improve significantly the partitioning behavior of G6PD relative to that observed in the two-phase aqueous C10E4 micellar system.

  7. The Effect of pH Difference Between Two Phases on the Partition of Lysozyme in Aqueous Two-Phase System

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In the investigation of effect of KSCN on the partitioning of lysozyme in PEG2000/ammonium sulfate aqueous two-phase system, it was found that the KSCN could alter the pH difference between the two phases, and thus affect the partition of lysozyme. The relationship between partition coefficients of lysozyme and pH differences between two phases was discussed.

  8. Correlations for the partition behavior of proteins in aqueous two-phase systems

    DEFF Research Database (Denmark)

    Schmidt, A.S.; Andrews, B.A.; Asenjo, J.A.

    1996-01-01

    The effect of protein concentration in partitioning in PEG/ salt aqueous two-phase systems has been investigated. PEG 4000/phosphate systems in the presence of 0% w/w and 8.8% w/w NaCl have been evaluated using amyloglucosidase, subtilisin, and trypsin inhibitor. Also, a PEG 4000/phosphate system...

  9. Extraction Equilibrium of Acrylic Acid by Aqueous Two-Phase Systems Using Hydrophilic Ionic Liquids

    International Nuclear Information System (INIS)

    As an effective method for extraction of acrylic acid, aqueous two-phase systems based on morpholinium ionic liquids were used in this study. Effects of the alkyl chain length of cation in morpholinium ionic liquids on phase diagram and extraction efficiencies were investigated. Experimental results show that aqueous two phase systems can be formed by adding appropriate amount of morpholinium ionic liquids to aqueous K2HPO4 solutions. It can be found that the ability of morpholinium ionic liquids for phase separation followed the order [HMMor][Br]>[OMMor][Br]>[BMMor][Br]>[EMMor][Br]. There was little difference between binodal curves of imidazolium ionic liquids and those of morpholinium ionic liquids. 50-90% of the extraction efficiency was observed for acrylic acid by aqueous two phase extraction of acrylic acid with morpholinium ionic liquids. It can be concluded that morpholinium ionic liquids/K2HPO4 were effective for aqueous two phases extraction of acrylic acid comparing to imidazolium ionic liquids/K2HPO4 systems because of their lower cost

  10. Rapid RNA Exchange in Aqueous Two-Phase System and Coacervate Droplets

    OpenAIRE

    Jia, Tony Z.; Hentrich, Christian; SZOSTAK, JACK W.

    2014-01-01

    Compartmentalization in a prebiotic setting is an important aspect of early cell formation and is crucial for the development of an artificial protocell system that effectively couples genotype and phenotype. Aqueous two-phase systems (ATPSs) and complex coacervates are phase separation phenomena that lead to the selective partitioning of biomolecules and have recently been proposed as membrane-free protocell models. We show in this study through fluorescence recovery after photobleaching (FR...

  11. On-chip aqueous two-phase system (ATPS) formation, consequential self-mixing, and their influence on drop-to-drop aqueous two-phase extraction kinetics

    Science.gov (United States)

    Wijethunga, Pavithra A. L.; Moon, Hyejin

    2015-09-01

    Aqueous two-phase systems (ATPSs) allow an advantageous aqueous two-phase extraction process (ATPE), a special type of liquid-liquid extraction. Compared with conventional liquid-liquid extraction using aqueous/organic extraction media, ATPE is known to provide relatively easy mass transfer and a gentle environment for biological separation applications. Considering the recent interest in microscale ATPE, we aimed to study (i) the potential of preparing ATPS droplets on a digital microfluidic device, and (ii) the influence of the fluidic dynamics created during the formation of ATPS, with the goal of enhancing on-chip ATPE process. On-chip ATPS formation was evaluated by preparing a series of ATPSs on electrowetting on dielectric digital microfluidic chips and comparing their characteristics with the same ATPSs prepared at macroscale using conventional procedures. An enhanced on-chip drop-to-drop ATPE process was achieved by incorporating a self-mixing condition created during ATPSformation. Results indicate a successful on-chip ATPS preparation as well as enhanced extraction performance by self-mixing in the absence of forced mixing. Findings of this research suggest an alternative, simple, yet adequate technique to provide mixing for on-chip applications, such as sample preparation in portable microfluidics, for which it is unfavorable to implement complicated mixing sequences or complex device geometries.

  12. Selective separation and enrichment of proteins in aqueous two-phase extraction system

    Institute of Scientific and Technical Information of China (English)

    Feng Qu; Hao Qin; Min Dong; Dong Xu Zhao; Xin Ying Zhao; Jing Hua Zhang

    2009-01-01

    A simple aqueous two-phase extraction system(ATPS)of PEG/phosphate was proposed for selective separation and enrichment of proteins.The combination of ATPE with HPLC was applied to identify the partition of proteins in two phases.Five proteins (bovine serum albumin,Cytochrome C,lysozyme,myoglobin,and trypsin)were used as model proteins to study the effect of phosphate concentration and pH on proteins partition.The PEG/phosphate system was firstly applied to real human saliva and plasma samples,some proteins showed obviously different partition in two phases.The primary results manifest the selective separation and enrichment of proteins in ATPS provided the potential for high abundance proteins depletion in proteomics.

  13. Partitioning Behavior of Papain in Ionic Liquids-Based Aqueous Two-Phase Systems

    OpenAIRE

    Zhiwen Bai; Yanhong Chao; Meiling Zhang; Changri Han; Wenshuai Zhu; Yonghui Chang; Huaming Li; Yang Sun

    2013-01-01

    This paper attempts to study and optimize the affinity partitioning conditions of papain in an aqueous two-phase system (ATPS). The effect of the amount of ionic liquids (ILs), the concentration of K2HPO4, temperature, pH, and the volume of papain solution were discussed concretely. The optimum conditions were determined as ionic liquid was 1.4 g and K2HPO4 was 1.4 g, the extraction efficiency of papain co...

  14. Comparison of colorimetric methods for the quantification of model proteins in aqueous two-phase systems.

    Science.gov (United States)

    Glyk, Anna; Heinisch, Sandra L; Scheper, Thomas; Beutel, Sascha

    2015-05-15

    In the current study, the quantification of different model proteins in the presence of typical aqueous two-phase system components was investigated by using the Bradford and bicinchoninic acid (BCA) assays. Each phase-forming component above 1 and 5 wt% had considerable effects on the protein quantification in both assays, respectively, resulting in diminished protein recoveries/absorption values by increasing poly(ethylene glycol) (PEG)/salt concentration and PEG molecular weight. Therefore, a convenient dilution of both components (up to 1 and 5 wt%) before protein quantification is recommended in both assays, respectively, where the BCA assay is favored in comparison with the Bradford assay. PMID:25684109

  15. Purification and In Situ Immobilization of Papain with Aqueous Two-Phase System

    OpenAIRE

    Li, Mingliang; Su, Erzheng; You, Pengyong; Gong, Xiangyu; Sun, Ming; Xu, Diansheng; Wei, Dongzhi

    2010-01-01

    Papain was purified from spray-dried Carica papaya latex using aqueous two-phase system (ATPS). Then it was recovered from PEG phase by in situ immobilization or preparing cross-linked enzyme aggregates (CLEAs). The Plackett-Burman design and the central composite design (CCD) together with the response surface methodology (RSM) were used to optimize the APTS processes. The highly purified papain (96–100%) was achieved under the optimized conditions: 40% (w/w) 15 mg/ml enzyme solution, 14.33–...

  16. A stable liquid–liquid extraction system for clavulanic acid using polymer-based aqueous two-phase systems

    OpenAIRE

    Pereira, Jorge F. B.; Santos, Valéria Carvalho; Johansson, Hans-Olof; J. A. Teixeira; Pessoa Júnior, Adalberto

    2012-01-01

    The partitioning of Clavulanic Acid (CA) in a novel inexpensive and stable aqueous two-phase system (ATPS) composed by poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA) has been studied. The aqueous two-phase systems are formed by mixing both polymers with a salt (NaCl or Na2SO4) and an aqueous solution of CA. The stability of CA on the presence of both polymers was investigated and it was observed that these polymers do not degrade the biomolecule. The effect of PEG-molecular ...

  17. Rapid RNA Exchange in Aqueous Two-Phase System and Coacervate Droplets

    Science.gov (United States)

    Jia, Tony Z.; Hentrich, Christian; Szostak, Jack W.

    2014-02-01

    Compartmentalization in a prebiotic setting is an important aspect of early cell formation and is crucial for the development of an artificial protocell system that effectively couples genotype and phenotype. Aqueous two-phase systems (ATPSs) and complex coacervates are phase separation phenomena that lead to the selective partitioning of biomolecules and have recently been proposed as membrane-free protocell models. We show in this study through fluorescence recovery after photobleaching (FRAP) microscopy that despite the ability of such systems to effectively concentrate RNA, there is a high rate of RNA exchange between phases in dextran/polyethylene glycol ATPS and ATP/poly-L-lysine coacervate droplets. In contrast to fatty acid vesicles, these systems would not allow effective segregation and consequent evolution of RNA, thus rendering these systems ineffective as model protocells.

  18. Selective separation of protein and saccharides by ionic liquids aqueous two-phase systems

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In the present work,it was found that aqueous solution of a hydrophilic ionic liquid (IL),1-butyl-3-methylimidazolium dicyanamide ([C4mim][N(CN)2]),could be separated into an aqueous two-phase system (ATPS) by inorganic salts such as K2HPO4 and K3PO4.The top phase is IL-rich,while the bottom phase is phosphate-rich.It was shown that 82.7%-100% bovine serum albumin (BSA) could be enriched into the top phase and almost quantitative saccharides (arabinose,glucose,sucrose,raffinose or dextran) were preferentially extracted into the bottom phase in a single-step extraction by [C4mim][N(CN)2] + K2HPO4 ATPS.The extraction efficiency of BSA from the aqueous saccharide solutions was influenced by the molecular structure of saccharides.The conductivity,dynamic light scattering (DLS) and transmission electron microscopy (TEM) were combined to investigate the microstructure of the IL-rich top phase and the possible mechanism for the selective separation.It is suggested that the formation of the IL aggregate and the IL aggregate-BSA complex plays a significant role in the separation of BSA from aqueous saccharide solutions.This is the first example for the selective separation by ILs-based ATPSs.It is expected that these findings would have potential applications in bio-analysis,separation,and IL recycle.

  19. Protein partitioning in poly(ethylene glycol)/sodium polyacrylate aqueous two-phase systems.

    Science.gov (United States)

    Johansson, Hans-Olof; Magaldi, Flavio Musa; Feitosa, Eloi; Pessoa, Adalberto

    2008-01-18

    The partition of hemoglobin, lysozyme and glucose-6-phosphate dehydrogenase (G6PDH) in a novel inexpensive aqueous two-phase system (ATPS) composed by poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA) has been studied. The effect of NaCl and Na(2)SO(4), pH and PEG molecular size on the partitioning has been studied. At high pH (above 9), hemoglobin partitions strongly to the PEG-phase. Although some precipitation of hemoglobin occurs, high recovery values are obtained particularly for lysozyme and G6PDH. The partitioning forces are dominated by the hydrophobic and electrochemical (salt) effects, since the positively charged lysozyme and negatively charged G6PDH partitions to the non-charged PEG and the strongly negatively charged polyacrylate enriched phase, respectively. PMID:18078945

  20. Ionic Liquid-salt Aqueous Two-phase System, a Novel System for the Extraction of Abused Drugs

    Institute of Scientific and Technical Information of China (English)

    She Hong LI; Chi Yang HE; Hu Wei LIU; Ke An LI; Feng LIU

    2005-01-01

    A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated systematically. A satisfactory extraction efficiency of 93%was obtained for papaverine while that of morphine was 65%. The extraction mechanism was primarily discussed.

  1. A green deep eutectic solvent-based aqueous two-phase system for protein extracting

    International Nuclear Information System (INIS)

    Highlights: • A strategy for the protein purification with a deep eutectic solvent(DES)-based aqueous two-phase system. • Choline chloride-glycerin DES was selected as the extraction solvent. • Bovine serum albumin and trypsin were used as the analytes. • Aggregation phenomenon was detected in the mechanism research. - Abstract: As a new type of green solvent, deep eutectic solvent (DES) has been applied for the extraction of proteins with an aqueous two-phase system (ATPS) in this work. Four kinds of choline chloride (ChCl)-based DESs were synthesized to extract bovine serum albumin (BSA), and ChCl-glycerol was selected as the suitable extraction solvent. Single factor experiments have been done to investigate the effects of the extraction process, including the amount of DES, the concentration of salt, the mass of protein, the shaking time, the temperature and PH value. Experimental results show 98.16% of the BSA could be extracted into the DES-rich phase in a single-step extraction under the optimized conditions. A high extraction efficiency of 94.36% was achieved, while the conditions were applied to the extraction of trypsin (Try). Precision, repeatability and stability experiments were studied and the relative standard deviations (RSD) of the extraction efficiency were 0.4246% (n = 3), 1.6057% (n = 3) and 1.6132% (n = 3), respectively. Conformation of BSA was not changed during the extraction process according to the investigation of UV–vis spectra, FT-IR spectra and CD spectra of BSA. The conductivity, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to explore the mechanism of the extraction. It turned out that the formation of DES–protein aggregates play a significant role in the separation process. All the results suggest that ChCl-based DES-ATPS are supposed to have the potential to provide new possibilities in the separation of proteins

  2. A green deep eutectic solvent-based aqueous two-phase system for protein extracting

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Kaijia; Wang, Yuzhi, E-mail: wyzss@hnu.edu.cn; Huang, Yanhua; Li, Na; Wen, Qian

    2015-03-15

    Highlights: • A strategy for the protein purification with a deep eutectic solvent(DES)-based aqueous two-phase system. • Choline chloride-glycerin DES was selected as the extraction solvent. • Bovine serum albumin and trypsin were used as the analytes. • Aggregation phenomenon was detected in the mechanism research. - Abstract: As a new type of green solvent, deep eutectic solvent (DES) has been applied for the extraction of proteins with an aqueous two-phase system (ATPS) in this work. Four kinds of choline chloride (ChCl)-based DESs were synthesized to extract bovine serum albumin (BSA), and ChCl-glycerol was selected as the suitable extraction solvent. Single factor experiments have been done to investigate the effects of the extraction process, including the amount of DES, the concentration of salt, the mass of protein, the shaking time, the temperature and PH value. Experimental results show 98.16% of the BSA could be extracted into the DES-rich phase in a single-step extraction under the optimized conditions. A high extraction efficiency of 94.36% was achieved, while the conditions were applied to the extraction of trypsin (Try). Precision, repeatability and stability experiments were studied and the relative standard deviations (RSD) of the extraction efficiency were 0.4246% (n = 3), 1.6057% (n = 3) and 1.6132% (n = 3), respectively. Conformation of BSA was not changed during the extraction process according to the investigation of UV–vis spectra, FT-IR spectra and CD spectra of BSA. The conductivity, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to explore the mechanism of the extraction. It turned out that the formation of DES–protein aggregates play a significant role in the separation process. All the results suggest that ChCl-based DES-ATPS are supposed to have the potential to provide new possibilities in the separation of proteins.

  3. The effect of sulphates on partitioning of pectinases in aqueous two-phase systems

    Directory of Open Access Journals (Sweden)

    Antov Mirjana G.

    2004-01-01

    Full Text Available The effect of various sulphate salts on the partitioning of endo-pectinase and exo-pectinase in aqueous two-phase systems, composed of polyethylene glycol and dextran, was studied. Presence of ammonium sulphate and sodium sulphate at concentration 15 mmol/l in the system polyethylene glycol 4000/crude dextran, at tie-line length 7.44%, increased partition coefficient of endo-pectinase 1.25 and 1.2 fold, respectively. Ammonium sulphate at 15 mmol/l and sodium sulphate at 5 mmol/l enhanced partition coefficient for exo-pectinase for about 60% in comparison to the system without salts. Addition of magnesium and sodium sulphate to a final concentration of 0.3 mmol/l in the system containing polyethylene glycol 6000/dextran 500 000, at tie-line length 6.26%, increased the partition coefficient of endo activity for 95% and 32%, respectively. Both salts at the same concentration increased partition coefficient of exo activity 1.5 and 3 times, respectively, in comparison to the system without salts.

  4. Effects of organic solvents on the partitioning of enzymes in aqueous two-phase systems.

    Science.gov (United States)

    Johansson, G; Kopperschläger, G

    1987-02-13

    Organic solvents (ethylene glycol, glycerol, dimethyl sulphoxide, dimethylformamide, dioxane, methanol and propanol-2, as well as sucrose and urea) have been included in aqueous two-phase (liquid-liquid) systems comprised of water, dextran and poly(ethylene glycol). The concentration of the organic solvent was in most cases 20% (w/w). The influence of these solvents on the phase-forming properties, the volume ratio, the freezing point and the partitioning of a polymer-bound ligand, Procion Red HE-3B poly(ethylene glycol), has been studied. The partition coefficients for alkaline phosphatase decrease with ethylene glycol, glycerol, sucrose and urea (factors of 0.25-0.5), but increase with the other substances (factors of 1.2-1.6). The temperature effects on the partitioning of alkaline phosphatase from calf intestine as well as of phosphofructokinase from yeast in systems containing ethylene glycol have been studied and compared with partitioning in standard systems, not containing solvents. The possible uses of the above systems for partitioning studies of enzymes are discussed. PMID:2951391

  5. Aqueous Two-phase Systems with Ultrasonic Extraction Used for Extracting Phenolic Compounds from Inonotus obliquus

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Yan-xia; LIU; Yu-bing; LIU; Feng; ZHENG; Wei-fa

    2013-01-01

    Objective To optimize the extracting technology of assessing the maximum yield of phenolic compounds (PC) from Inonotus obliquus by single factor experiments and orthogonal array design methods through aqueous two-phase systems combined with ultrasonic extraction. Methods The range of the independent variables, namely levels of acetone and ammonium sulfate, and ultrasonic time were identified by a first set of single factor experiments. The actual values of the independent variables coded at four levels and three factors were selected based on the results of the single factor experiments. Subsequently, the levels of acetone and ammonium sulfate, and ultrasonic time were optimized using the orthogonal array method. Results The optimum conditions for the extraction of PC were found to use 7.0 mL acetone, 5.5 mg ammonium sulfate, with ultrasonic time for 5 min. Under these optimized conditions, the experimental maximum yield of PC was 37.8 mg/g, much higher than that of the traditional ultrasonic extraction (UE, 29.0 mg/g). And the PC obtained by this method had stronger anti-oxidative activities than those by traditional UE method. Conclusion These results indicate the suitability of the models developed and the success in optimizing the extraction conditions. This is an economical and efficient method for extracting polyphenols from I. obliquus.

  6. Aqueous Two-phase Systems with Ultrasonic Extraction Used for Extracting Phenolic Compounds from Inonotus obliquus

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yan-xia; LIU Yu-bing; LIU Feng; ZHENG Wei-fa

    2013-01-01

    Objective To optimize the extracting technology of assessing the maximum yield of phenolic compounds (PC)from Inonotus obliquus by single factor experiments and orthogonal array design methods through aqueous two-phase systems combined with ultrasonic extraction.Methods The range of the independent variables,namely levels of acetone and ammonium sulfate,and ultrasonic time were identified by a first set of single factor experiments.The actual values of the independent variables coded at four levels and three factors were selected based on the results of the single factor experiments.Subsequently,the levels of acetone and ammonium sulfate,and ultrasonic time were optimized using the orthogonal array method.Results The optimum conditions for the extraction of PC were found to use 7.0 mL acetone,5.5 mg ammonium sulfate,with ultrasonic time for 5 min.Under these optimized conditions,the experimental maximum yield of PC was 37.8 mg/g,much higher than that of the traditional ultrasonic extraction (UE,29.0 mg/g).And the PC obtained by this method had stronger anti-oxidative activities than those by traditional UE method.Conclusion These results indicate the suitability of the models developed and the success in optimizing the extraction conditions.This is an economical and efficient method for extracting polyphenols from Ⅰ.obliquus.

  7. Partitioning in aqueous two-phase systems: Analysis of strengths, weaknesses, opportunities and threats.

    Science.gov (United States)

    Soares, Ruben R G; Azevedo, Ana M; Van Alstine, James M; Aires-Barros, M Raquel

    2015-08-01

    For half a century aqueous two-phase systems (ATPSs) have been applied for the extraction and purification of biomolecules. In spite of their simplicity, selectivity, and relatively low cost they have not been significantly employed for industrial scale bioprocessing. Recently their ability to be readily scaled and interface easily in single-use, flexible biomanufacturing has led to industrial re-evaluation of ATPSs. The purpose of this review is to perform a SWOT analysis that includes a discussion of: (i) strengths of ATPS partitioning as an effective and simple platform for biomolecule purification; (ii) weaknesses of ATPS partitioning in regard to intrinsic problems and possible solutions; (iii) opportunities related to biotechnological challenges that ATPS partitioning may solve; and (iv) threats related to alternative techniques that may compete with ATPS in performance, economic benefits, scale up and reliability. This approach provides insight into the current status of ATPS as a bioprocessing technique and it can be concluded that most of the perceived weakness towards industrial implementation have now been largely overcome, thus paving the way for opportunities in fermentation feed clarification, integration in multi-stage operations and in single-step purification processes. PMID:26213222

  8. Extraction of amylase from fermentation broth in poly (Ethylene Glycol salt aqueous two-phase system

    Directory of Open Access Journals (Sweden)

    Raquel Pedrosa Bezerra

    2006-07-01

    Full Text Available Studies were carried out on the partition of amylase from Bacillus subtilis in a minimal medium at 37 ºC and 110 rpm. Enzyme recovery was carried out in aqueous two-phase system PEG-Phosphate salt were carried out. The best purification factor (5.4 was obtained in system PEG 1000 (16.7% w/w with potassium phosphate (14.8% w/w, at pH 6.0, resulting in a recovery of 45.2% activity enzymatic in the salt-rich phase.Enzimas amilolíticas têm sido amplamente investigadas com a finalidade de melhorar os processos industriais para a degradação do amido. Foi determinado que a extração da enzima em sistema bifásico aquosos é um método aplicável para separação e purificação de biomoléculas em misturas. Vários sistemas compostos de soluções aquosas de polietilenoglicol e fosfato foram avaliados. Estudos de produção em meio mínimo suplementado, à 37ºC, com uma velocidade de agitação de 110rpm e recuperação da amilase a partir do Bacillus subtilis em sistema bifásico aquoso PEG-fosfato foram avaliados. O melhor fator de purificação (5.4 foi obtido no sistema PEG 1000 (16.7% w/w com fosfato de potássio (14.8% w/w, a pH 6.0, resultando na recuperação da atividade enzimática de 45.2% na fase rica em sal.

  9. Molecular dynamics simulations on aqueous two-phase systems - Single PEG-molecules in solution

    Directory of Open Access Journals (Sweden)

    Oelmeier Stefan A

    2012-08-01

    Full Text Available Abstract Background Molecular Dynamics (MD simulations are a promising tool to generate molecular understanding of processes related to the purification of proteins. Polyethylene glycols (PEG of various length are commonly used in the production and purification of proteins. The molecular mechanisms behind PEG driven precipitation, aqueous two-phase formation or the effects of PEGylation are however still poorly understood. Results In this paper, we ran MD simulations of single PEG molecules of variable length in explicitly simulated water. The resulting structures are in good agreement with experimentally determined 3D structures of PEG. The increase in surface hydrophobicity of PEG of longer chain length could be explained on an atomic scale. PEG-water interactions as well as aqueous two-phase formation in the presence of PO4 were found to be correlated to PEG surface hydrophobicity. Conclusions We were able to show that the taken MD simulation approach is capable of generating both structural data as well as molecule descriptors in agreement with experimental data. Thus, we are confident of having a good in silico representation of PEG.

  10. Purification of C-phycocyanin from Spirulina platensis in aqueous two-phase systems using an experimental design

    OpenAIRE

    Francine Silva Antelo; Jorge Alberto Vieira Costa; Susana Juliano Kalil

    2015-01-01

    C-phycocyanin from Spirulina platensis was purified in aqueous two-phase systems (ATPS) of polyethylene glycol (PEG)/potassium phosphate, varying the molar mass of the PEG. Results using a full factorial design showed that an increase in the concentration of salt and decrease in the concentration of PEG caused an increment in the purification factor for all the ATPS studied. Optimization of the conditions of the purification was studied using a central composite rotatable design for each mola...

  11. Aqueous two-phase micellar systems in an oscillatory flow micro-reactor: Study of perspectives and experimental performance

    OpenAIRE

    A. M. LOPES; Silva, Daniel Pereira da; A.A. Vicente; Pessoa Júnior, Adalberto; Teixeira, J. A.

    2011-01-01

    Aqueous two-phase micellar systems (ATPMS) are micellar surfactant solutions with physical properties that make them very efficient for the extraction/concentration of biological products. In this work the main proposal that has been discussed is the possible applicability and importance of a novel oscillatory flow micro-reactor (micro-OFR) envisaged for parallel screening and/or development of industrial bioprocesses in ATPMS. Based on the technology of oscillatory flow mixing (OFM), this ba...

  12. Partition of Chiral pharmaceutical intermediate R(-)-Mandelic Acid in Aqueous Two-Phase System of Poly(ethylene glycol)-Ammonium Sulfate

    Institute of Scientific and Technical Information of China (English)

    Xu Xiaoping; Li Zhongqin; Chen Jiebo; Huang Xinghua

    2004-01-01

    An aqueous two-phase system of poly (ethylene glycol)-ammonium sulfate was employed to separate R (-)-mandelic acid.The result showed that R (-)-mandelic acid has priority to partition in PEG-rich top phase. This indicated that aqueous two-phase is a very suitable system for separation of R(-)-mandelic acid.

  13. Partition of synaptic membranes in aqueous two-phase systems at subzero temperatures by using anti-freeze solvent.

    Science.gov (United States)

    Johansson, G; Joelsson, M; Olde, B

    1990-11-16

    The freezing point of aqueous two-phase (liquid-liquid) systems containing water, dextran and poly(ethylene glycol) has been lowered by including glycerol. Biological membranes, obtained by fragmentation of a crude synaptosomal preparation from calf brain cortex, have been included in the two-phase systems. The effects of temperature and the concentration of glycerol on the partition of the membranes within the systems have been investigated. Considerable stabilisation of the membranes was noticed when they were partitioned at -10 degrees C compared with 0 degrees C. The influences of glycerol, ethylene glycol, N,N-dimethylformamide and tetrahydrofuran on the phase-forming properties of the systems and on enzyme activities are also presented. Possible use of the above systems for studies and separation of biological membranes are discussed. PMID:2245213

  14. Phase Separation Behavior and System Properties of Aqueous Two-Phase Systems with Polyethylene Glycol and Different Salts: Experiment and Correlation

    OpenAIRE

    Haihua Yuan; Yang Liu; Wanqian Wei; Yongjie Zhao

    2015-01-01

    The phase separation behaviors of PEG1000/sodium citrate, PEG4000/sodium citrate, PEG1000/ammonium sulfate, and PEG4000/ammonium sulfate aqueous two-phase systems were investigated, respectively. There are two distinct situations for the phase separation rate in the investigated aqueous two-phase systems: one state is top-continuous phase with slow phase separation rate and strong bottom-continuous phase with fast phase separation rate and weak volume ratio dependence. The system properties s...

  15. Thermodynamic modelling of phase equilibrium for water + poly(Ethylene glycol + salt aqueous two-phase systems

    Directory of Open Access Journals (Sweden)

    R.A.G. Sé

    2002-04-01

    Full Text Available The NRTL (nonrandom, two-liquid model, expressed in mass fraction instead of mole fraction, was used to correlate liquid-liquid equilibria for aqueous two-phase polymer-salt solutions. New interaction energy parameters for this model were determined using reported data on the water + poly(ethylene glycol + salt systems, with different molecular masses for PEG and the salts potassium phosphate, sodium sulfate, sodium carbonate and magnesium sulfate. The correlation of liquid-liquid equilibrium is quite satisfactory.

  16. Phase Diagrams of the Aqueous Two-Phase Systems of Poly(ethylene glycol)/Sodium Polyacrylate/Salts

    OpenAIRE

    Adalberto Pessoa Junior; Hans-Olof Johansson; Eloi Feitosa

    2011-01-01

    Aqueous two-phase systems consisting of polyethylene glycol (PEG), sodium polyacrylate (NaPAA), and a salt have been studied. The effects of the polymer size, salt type (NaCl, Na2SO4, sodium adipate and sodium azelate) and salt concentrations on the position of the binodal curve were investigated. The investigated PEG molecules had a molar mass of 2,000 to 8,000 g/mol, while that of NaPAA was 8,000 g/mol. Experimental phase diagrams, and tie lines and calculated phase diagrams, based on Flory...

  17. Partition of volatile compounds in pea globulin-maltodextrin aqueous two-phase system.

    Science.gov (United States)

    Nguyen, Thanh Dat; Lafarge, Céline; Murat, Chloé; Mession, Jean-Luc; Cayot, Nathalie; Saurel, Rémi

    2014-12-01

    This study is based on the assumption that the off-flavour of pea proteins might be decreased using the retention of volatile compounds by a mixture with another biopolymer. The partition of volatile compounds in an aqueous system containing pea protein and maltodextrins was followed under thermodynamic incompatibility conditions. Firstly, the phase diagram of the system was established. Then, the partition of aroma compounds between the phase rich in protein and the phase rich in maltodextrin was measured by SPME-GC-MS. There was a transfer of volatile compounds during phase separation. Variations of pH were also used to vary the retention of volatile compounds by proteins. The concentration of volatile compounds in protein solution at pH 2.4 was higher than at pH 7.2. It was possible to increase the transfer of volatile compounds from the phase rich in protein to the phase rich in maltodextrin using the effect of pH on protein denaturation. PMID:24996351

  18. Microbial side-chain cleavage of phytosterols by mycobacteria in vegetable oil/aqueous two-phase system.

    Science.gov (United States)

    Xu, Yang-Guang; Guan, Yi-Xin; Wang, Hai-Qing; Yao, Shan-Jing

    2014-09-01

    Microbial side-chain cleavage of natural sterols to 4-androstene-3,17-dione (AD) and 1,4-androstadiene-3,17-dione (ADD) by Mycobacteria has received much attention in pharmaceutical industry, while low yield of the reaction owing to the strong hydrophobicity of sterols is a tough problem to be solved urgently. Eight kinds of vegetable oils, i.e., sunflower, peanut, corn, olive, linseed, walnut, grape seed, and rice oil, were used to construct oil/aqueous biphasic systems in the biotransformation of phytosterols by Mycobacterium sp. MB 3683 cells. The results indicated that vegetable oils are suitable for phytosterol biotransformation. Specially, the yield of AD carried out in sunflower biphasic system (phase ratio of 1:9, oil to aqueous) was greatly increased to 84.8 % with 10 g/L feeding concentration after 120-h transformation at 30 °C and 200 rpm. Distribution coefficients of AD in different oil/aqueous systems were also determined. Because vegetable oils are of low cost and because of their eco-friendly characters, there is a great potential for the application of oil/aqueous two-phase systems in bacteria whole cell biocatalysis. PMID:25082765

  19. Aqueous two-phase systems: an efficient, environmentally safe and economically viable method for purification of natural dye carmine.

    Science.gov (United States)

    Mageste, Aparecida Barbosa; de Lemos, Leandro Rodrigues; Ferreira, Guilherme Max Dias; da Silva, Maria do Carmo Hespanhol; da Silva, Luis Henrique Mendes; Bonomo, Renata Cristina Ferreira; Minim, Luis Antonio

    2009-11-01

    Partition of the natural dye carmine has been studied in aqueous two-phase systems prepared by mixing aqueous solutions of polymer or copolymer with aqueous salt solutions (Na(2)SO(4) and Li(2)SO(4)). The carmine dye partition coefficient was investigated as a function of system pH, polymer molar mass, hydrophobicity, system tie-line length and nature of the electrolyte. It has been observed that the carmine partition coefficient is highly dependent on the electrolyte nature and pH of the system, reaching values as high as 300, indicating the high potential of the two-phase extraction with ATPS in the purification of carmine dye. The partition relative order was Li(2)SO(4)"Na(2)SO(4). Carmine molecules were concentrated in the polymer-rich phase, indicating an enthalpic specific interaction between carmine and the pseudopolycation, which is formed by cation adsorption along the macromolecule chain. When the enthalpic carmine-pseudopolycation interaction decreases, entropic forces dominate the natural dye-transfer process, and the carmine partitioning coefficient decreases. The optimization of the extraction process was obtained by a central composite face-centered (CCF) design. The CCF design was used to evaluate the influence of Li(2)SO(4) and PEO 1500 concentration and of the pH on the partition coefficient of carmine. The conditions that maximize the partition of carmine into the top phase were determined to be high concentrations of PEO and Li(2)SO(4) and low pH values within the ranges studied. PMID:19800067

  20. Design and development of single stage purification of papain using Ionic Liquid based aqueous two phase extraction system and its Partition coefficient studies

    OpenAIRE

    Senthilkumar Rathnasamy; R.Kumaresan2

    2013-01-01

    As an emerging trend in bioseparation, aqueous two phase extractions based on phosponium ionic liquid have been utilized in this work to extract papain from Carica papaya fruit latex and the same wascompared with conventional aqueous two phase extraction system. Factors affecting the partition coefficient of papain such as ionic liquid concentration, pH of the extraction system and temperature have been investigated. The optimization studies show that ionic liquid concentrations and pH are ma...

  1. Design of functional guanidinium ionic liquid aqueous two-phase systems for the efficient purification of protein

    International Nuclear Information System (INIS)

    Graphical abstract: - Highlights: • A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been synthesized. • Functional guanidinium ionic liquid aqueous two-phase systems have been first designed for the purification of protein. • Mechanisms and performances of the process were researched. • Simple, green, safety and presents better purified ability than ordinary process. • A potential efficient platform for protein purification and related studies. - Abstract: A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been devised and synthesized based on 1,1,3,3-tetramethylguanidine. The structures of the ionic liquids (ILs) were confirmed by 1H nuclear magnetic resonance (1H NMR) and 13C nuclear magnetic resonance (13C NMR) and the production yields were all above 90%. Functional guanidinium ionic liquid aqueous two-phase systems (FGIL-ATPSs) have been first designed with these functional guanidinium ILs and phosphate solution for the purification of protein. After phase separation, proteins had transferred into the IL-rich phase and the concentrations of proteins were determined by measuring the absorbance at 278 nm using an ultra violet visible (UV–vis) spectrophotometer. The advantages of FGIL-ATPSs were compared with ordinary ionic liquid aqueous two-phase systems (IL-ATPSs). The proposed FGIL-ATPS has been applied to purify lysozyme, trypsin, ovalbumin and bovine serum albumin. Single factor experiments were used to research the effects of the process, such as the amount of ionic liquid (IL), the concentration of salt solution, temperature and the amount of protein. The purification efficiency reaches to 97.05%. The secondary structure of protein during the experimental process was observed upon investigation using UV–vis spectrophotometer, Fourier-transform infrared spectroscopy (FT

  2. Design of functional guanidinium ionic liquid aqueous two-phase systems for the efficient purification of protein

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Xueqin; Wang, Yuzhi, E-mail: wyzss@hnu.edu.cn; Zeng, Qun; Chen, Jing; Huang, Yanhua; Xu, Kaijia

    2014-03-01

    Graphical abstract: - Highlights: • A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been synthesized. • Functional guanidinium ionic liquid aqueous two-phase systems have been first designed for the purification of protein. • Mechanisms and performances of the process were researched. • Simple, green, safety and presents better purified ability than ordinary process. • A potential efficient platform for protein purification and related studies. - Abstract: A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been devised and synthesized based on 1,1,3,3-tetramethylguanidine. The structures of the ionic liquids (ILs) were confirmed by {sup 1}H nuclear magnetic resonance ({sup 1}H NMR) and 13C nuclear magnetic resonance (13C NMR) and the production yields were all above 90%. Functional guanidinium ionic liquid aqueous two-phase systems (FGIL-ATPSs) have been first designed with these functional guanidinium ILs and phosphate solution for the purification of protein. After phase separation, proteins had transferred into the IL-rich phase and the concentrations of proteins were determined by measuring the absorbance at 278 nm using an ultra violet visible (UV–vis) spectrophotometer. The advantages of FGIL-ATPSs were compared with ordinary ionic liquid aqueous two-phase systems (IL-ATPSs). The proposed FGIL-ATPS has been applied to purify lysozyme, trypsin, ovalbumin and bovine serum albumin. Single factor experiments were used to research the effects of the process, such as the amount of ionic liquid (IL), the concentration of salt solution, temperature and the amount of protein. The purification efficiency reaches to 97.05%. The secondary structure of protein during the experimental process was observed upon investigation using UV–vis spectrophotometer, Fourier-transform infrared

  3. Phase Diagrams of the Aqueous Two-Phase Systems of Poly(ethylene glycol/Sodium Polyacrylate/Salts

    Directory of Open Access Journals (Sweden)

    Adalberto Pessoa Junior

    2011-03-01

    Full Text Available Aqueous two-phase systems consisting of polyethylene glycol (PEG, sodium polyacrylate (NaPAA, and a salt have been studied. The effects of the polymer size, salt type (NaCl, Na2SO4, sodium adipate and sodium azelate and salt concentrations on the position of the binodal curve were investigated. The investigated PEG molecules had a molar mass of 2,000 to 8,000 g/mol, while that of NaPAA was 8,000 g/mol. Experimental phase diagrams, and tie lines and calculated phase diagrams, based on Flory-Huggins theory of polymer solutions are presented. Due to strong enthalpic and entropic balancing forces, the hydrophobicity of the added salt has a strong influence on the position of the binodal, which could be reproduced by model calculations.

  4. Cell separation in immunoaffinity partition in aqueous polymer two-phase systems

    Science.gov (United States)

    Karr, Laurel J.; Van Alstine, James M.; Snyder, Robert S.; Shafer, Steven G.; Harris, J. Milton

    1989-01-01

    Two methods for immunoaffinity partitioning are described. One technique involves the covalent coupling of poly (ethylene glycol) (PEG) to immunoglobulin G antibody preparations. In the second method PEG-modified Protein A is used to complex with cells and unmodified antibody. The effects of PEG molecular weight, the degree of modification, and varying phase system composition on antibody activity and its affinity for the upper phase are studied. It is observed that both methods resulted in effective cell separation.

  5. Experimental determination and thermodynamic modeling of phase equilibrium and protein partitioning in aqueous two-phase systems containing biodegradable salts

    International Nuclear Information System (INIS)

    Highlights: ► Binodal data of systems (water + polyethyleneglycol + sodium) succinate are reported. ► Pitzer model describes the phase equilibrium of systems formed by polyethyleneglycol and biodegradable salts satisfactorily. ► This simple thermodynamic framework was able to predict the partitioning behaviour of model proteins acceptably well. - Abstract: Phase diagrams of sustainable aqueous two-phase systems (ATPSs) formed by polyethyleneglycols (PEGs) of different average molar masses (4000, 6000, and 8000) and sodium succinate are reported in this work. Partition coefficients (Kps) of seven model proteins: bovine serum albumin, catalase, beta-lactoglobulin, alpha-amylase, lysozyme, pepsin, urease and trypsin were experimentally determined in these systems and in ATPSs formed by the former PEGs and other biodegradable sodium salts: citrate and tartrate. An extension of Pitzer model comprising long and short-range term contributions to the excess Gibbs free energy was used to describe the (liquid + liquid) equilibrium. Comparison between experimental and calculated tie line data showed mean deviations always lower than 3%, thus indicating a good correlation. The partition coefficients were modeled by using the same thermodynamic approach. Predicted and experimental partition coefficients correlated quite successfully. Mean deviations were found to be lower than the experimental uncertainty for most of the assayed proteins.

  6. Characterization of aqueous two phase systems by combining lab-on-a-chip technology with robotic liquid handling stations.

    Science.gov (United States)

    Amrhein, Sven; Schwab, Marie-Luise; Hoffmann, Marc; Hubbuch, Jürgen

    2014-11-01

    Over the last decade, the use of design of experiment approaches in combination with fully automated high throughput (HTP) compatible screenings supported by robotic liquid handling stations (LHS), adequate fast analytics and data processing has been developed in the biopharmaceutical industry into a strategy of high throughput process development (HTPD) resulting in lower experimental effort, sample reduction and an overall higher degree of process optimization. Apart from HTP technologies, lab-on-a-chip technology has experienced an enormous growth in the last years and allows further reduction of sample consumption. A combination of LHS and lab-on-a-chip technology is highly desirable and realized in the present work to characterize aqueous two phase systems with respect to tie lines. In particular, a new high throughput compatible approach for the characterization of aqueous two phase systems regarding tie lines by exploiting differences in phase densities is presented. Densities were measured by a standalone micro fluidic liquid density sensor, which was integrated into a liquid handling station by means of a developed generic Tip2World interface. This combination of liquid handling stations and lab-on-a-chip technology enables fast, fully automated, and highly accurate density measurements. The presented approach was used to determine the phase diagram of ATPSs composed of potassium phosphate (pH 7) and polyethylene glycol (PEG) with a molecular weight of 300, 400, 600 and 1000 Da respectively in the presence and in the absence of 3% (w/w) sodium chloride. Considering the whole ATPS characterization process, two complete ATPSs could be characterized within 24h, including four runs per ATPS for binodal curve determination (less than 45 min/run), and tie line determination (less than 45 min/run for ATPS preparation and 8h for density determination), which can be performed fully automated over night without requiring man power. The presented methodology provides

  7. Purification of C-phycocyanin from Spirulina platensis in aqueous two-phase systems using an experimental design

    Directory of Open Access Journals (Sweden)

    Francine Silva Antelo

    2015-02-01

    Full Text Available C-phycocyanin from Spirulina platensis was purified in aqueous two-phase systems (ATPS of polyethylene glycol (PEG/potassium phosphate, varying the molar mass of the PEG. Results using a full factorial design showed that an increase in the concentration of salt and decrease in the concentration of PEG caused an increment in the purification factor for all the ATPS studied. Optimization of the conditions of the purification was studied using a central composite rotatable design for each molar mass of PEG. The ATPS composed of 7% (w/w PEG 1500 or 4% (w/w PEG 8000 (g/gmol and 23 or 22.5% (w/w of phosphate resulted a purification factor of 1.6-fold for C-phycocyanin, with total and 57% recovery, respectively. Process conditions were optimized for the purification factor for the system with PEG 1500. The ATPS with 4% (w/w PEG 4000 or 4% (w/w PEG 6000 and 21% (w/w phosphate resulted purification factors of 2.1 and 2.2-fold, recovering 100% and 73.5%, respectively of C-phycocyanin in the top phase.

  8. Partitioning of L-methionine in aqueous two-phase systems containing poly(propylene glycol) and sodium phosphate salts

    Energy Technology Data Exchange (ETDEWEB)

    Salabat, Alireza, E-mail: a-salabat@araku.ac.ir [Chemistry Department, Arak University, P.O. Box 38156-879, Arak (Iran, Islamic Republic of); Sadeghi, Rahmat [Department of Chemistry, University of Kurdistan, Sanandaj, Kurdistan 66135 (Iran, Islamic Republic of); Moghadam, Somayeh Tiani [Chemistry Department, Arak University, P.O. Box 38156-879, Arak (Iran, Islamic Republic of); Jamehbozorg, Bahman [Department of Chemistry, University of Kurdistan, Sanandaj, Kurdistan 66135 (Iran, Islamic Republic of)

    2011-10-15

    Highlights: > Thermodynamics parameters for partitioning of L-methionine in ATPS. > Investigation of different effects on partition coefficient of the amino acid. > Propose the best condition for L-methionine partitioning. - Abstract: The partitioning behavior of L-methionine has been studied in aqueous two-phase systems of (poly(propylene glycol) + sodium phosphate salts + H{sub 2}O) at different temperatures. The salts used were sodium di-hydrogen phosphate (NaH{sub 2}PO{sub 4}), di-sodium hydrogen phosphate (Na{sub 2}HPO{sub 4}) and tri-sodium phosphate (Na{sub 3}PO{sub 4}). The effects of tie line length, salt type, and temperature on the partition coefficient of this amino acid have been studied. In addition, thermodynamic parameters ({Delta}H{sup o}, {Delta}S{sup o} and {Delta}G{sup o}) as a function of temperature were calculated. The results showed that increasing tie line length led to decreasing of the partition coefficient. We also showed that the partition coefficients of the amino acid in the systems containing Na{sub 3}PO{sub 4} are greater than the other two salts. Moreover, it is verified that increasing temperature led to decreasing the partition coefficient. The experimental partition coefficient data are correlated using a modified virial-type model.

  9. Separation of porcine parvovirus from bovine serum albumin using PEG-salt aqueous two-phase system.

    Science.gov (United States)

    Vijayaragavan, K Saagar; Zahid, Amna; Young, Jonathan W; Heldt, Caryn L

    2014-09-15

    Vaccine production faces a challenge in adopting conventional downstream processing steps that can efficiently purify large viral particles. Some major issues that plague vaccine purification are purity, potency, and quality. The industry currently considers 30% as an acceptable virus recovery for a vaccine purification process, including all downstream processes, whereas antibody recovery from CHO cell culture is generally around 80-85%. A platform technology with an improved virus recovery would revolutionize vaccine production. In a quest to fulfill this goal, we have been exploring aqueous two-phase systems (ATPSs) as an optional mechanism to purify virus. ATPS has been unable to gain wide implementation mainly due to loss of virus infectivity, co-purification of proteins, and difficulty of polymer recycling. Non-enveloped viruses are chemically resistant enough to withstand the high polymer and salt concentrations that are required for effective ATPS separations. We used infectious porcine parvovirus (PPV), a non-enveloped, DNA virus as a model virus to test and develop an ATPS separation method. We successfully tackled two of the three main disadvantages of ATPS previously stated; we achieved a high infectious yield of 64% in a PEG-citrate ATPS process while separating out the main contaminate protein, bovine serum albumin (BSA). The most dominant forces in the separation were biomolecule charge, virus surface hydrophobicity, and the ATPS surface tension. Highly hydrophobic viruses are likely to benefit from the discovered ATPS for high-purity vaccine production and ease of implementation. PMID:25086421

  10. Development of green betaine-based deep eutectic solvent aqueous two-phase system for the extraction of protein.

    Science.gov (United States)

    Li, Na; Wang, Yuzhi; Xu, Kaijia; Huang, Yanhua; Wen, Qian; Ding, Xueqin

    2016-05-15

    Six kinds of new type of green betaine-based deep eutectic solvents (DESs) have been synthesized. Deep eutectic solvent aqueous two-phase systems (DES-ATPS) were established and successfully applied in the extraction of protein. Betaine-urea (Be-U) was selected as the suitable extractant. Single factor experiments were carried out to determine the optimum conditions of the extraction process, such as the salt concentration, the mass of DES, the separation time, the amount of protein, the temperature and the pH value. The extraction efficiency could achieve to 99.82% under the optimum conditions. Mixed sample and practical sample analysis were discussed. The back extraction experiment was implemented and the back extraction efficiency could reach to 32.66%. The precision experiment, repeatability experiment and stability experiment were investigated. UV-vis, FT-IR and circular dichroism (CD) spectra confirmed that the conformation of protein was not changed during the process of extraction. The mechanisms of extraction were researched by dynamic light scattering (DLS), the measurement of the conductivity and transmission electron microscopy (TEM). DES-protein aggregates and embraces phenomenon play considerable roles in the separation process. All of these results indicated that betaine-based DES-ATPS may provide a potential substitute new method for the separation of proteins. PMID:26992491

  11. Extraction of natural red colorants from the fermented broth of Penicillium purpurogenum using aqueous two-phase polymer systems.

    Science.gov (United States)

    Santos-Ebinuma, Valéria Carvalho; Lopes, André Moreni; Pessoa, Adalberto; Teixeira, Maria Francisca Simas

    2015-01-01

    Safety concerns related to the increasing and widespread application of synthetic coloring agents have increased the demand for natural colorants. Fungi have been employed in the production of novel and safer colorants. In order to obtain the colorants from fermented broth, suitable extraction systems must be developed. Aqueous two-phase polymer systems (ATPPS) offer a favorable chemical environment and provide a promising alternative for extracting and solubilizing these molecules. The aim of this study was to investigate the partitioning of red colorants from the fermented broth of Penicillium purpurogenum using an ATPPS composed of poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA). Red colorants partitioned preferentially to the top (PEG-rich phase). In systems composed of PEG 6,000 g/mol/NaPA 8,000 g/mol, optimum colorant partition coefficient (KC ) was obtained in the presence of NaCl 0.1 M (KC  = 10.30) while the PEG 10,000 g/mol/NaPA 8,000 g/mol system in the presence of Na2 SO4 0.5 M showed the highest KC (14.78). For both polymers, the mass balance (%MB) and yield in the PEG phase (%ηTOP ) were close to 100 and 79%, respectively. The protein selectivity in all conditions evaluated ranged from 2.0-3.0, which shows a suitable separation of the red colorants and proteins present in the fermented broth. The results suggest that the partitioning of the red colorants is dependent on both the PEG molecular size and salt type. Furthermore, the results obtained support the potential application of ATPPS as the first step of a purification process to recover colorants from fermented broth of microorganisms. PMID:26097197

  12. Partitioning and purification of extracellular β-1,3-1,4-glucanase in aqueous two-phase systems

    Institute of Scientific and Technical Information of China (English)

    HE Guo-qing; ZHANG Xiu-yan; TANG Xing-jun; CHEN Qi-he; RUAN Hui

    2005-01-01

    The partition behaviors of β-1,3-1,4-glucanase, α-amylase and neutral proteases from clarified and whole fermentation broths of Bacillus subtilis ZJF-1A5 were investigated. An aqueous two-phase system (polyethylene glycol (PEG)/MgSO4)was examined with regard to the effects of PEG molecular weight (MW) and concentration, MgSO4 concentration, pH and NaCl concentration on enzyme partition and extraction. The MW and concentration of PEG were found to have significant effects on enzyme partition and extraction with low MW PEG showing the greatest benefit in the partition and extraction of β-glucanase with the PEG/MgSO4 system. MgSO4 concentration influenced the partition and extraction of β-glucanase significantly. pH had little effect on β-glucanase or proteases partition but affected α-amylase partition when pH was over 7.0. The addition of NaCl had little effect on the partition behavior of β-glucanase but had very significant effects on the partitioning of α-amylase and on the neutral proteases. The partition behaviors of β-glucanase, α-amylase and proteases in whole broth were also investigated and results were similar to those obtained with clarified fermentation broth. A two-step process for purifying β-glucanase was developed, which achieved β-glucanase recovery of 65.3% and specific activity of 14027 U/mg, 6.6 times improvement over the whole broth.

  13. Preparation of cationic polyacrylamide by aqueous two-phase polymerization

    Directory of Open Access Journals (Sweden)

    2010-05-01

    Full Text Available Cationic polyacrylamide (CPAM was synthesized by aqueous two-phase polymerization technique using acrylamide (AM and dimethylaminoethyl methacrylate methyl chloride (DMC as raw materials, aqueous polyethylene glycol 20000 (PEG 20000 solution as dispersant, 2,2′-azobis(2-amidinopropane dihydrochloride (V-50 as initiator and poly(dimethylaminoethyl methacrylate methyl chloride (PDMC as stabilizer. The polymer was characterized by infrared (IR spectroscopy, 1H-NMR spectrum and transmission electron microscopy (TEM. The copolymer composition was analyzed. The effect of monomers concentration, PEG 20000 concentration and stabilizer concentration on copolymer were investigated, respectively. The optimum reaction conditions for obtaining a stable CPAM aqueous two-phase system were monomers concentration 8~15%, PEG 20000 concentration 15~25%, and PDMC concentration 0.5~1.5%. Finally, the formation process of copolymer particles was investigated by optical microscope.

  14. Extraction of penicillin G by aqueous two-phase system of [Bmim]BF4/NaH2PO4

    Institute of Scientific and Technical Information of China (English)

    LIU Qingfen; HU Xuesheng; WANG Yuhong; YANG Ping; XIA Hansong; YU Jiang; LIU Huizhou

    2005-01-01

    A novel approach for the extraction of penicillin G by aqueous two-phase system comprised of hydrophilic ionic liquid [Bmim]BF4 (1-butyl-3- methylimidazolium tetrafluoroborate) and NaH2PO4 is reported. The effects of some important parameters involving the concentration of NaH2PO4, the concentration of penicillin G, the amount of [Bmim]BF4 on the formation of aqueous two-phase system and the extraction yield of penicillin were investigated. The primary result shows that the ATPS can take advantage of penicillin concentrated in upper phase at higher pH value for penicillin extraction from its aqueous solution without emulsification.

  15. Purification of a fibrinolytic protease from Mucor subtilissimus UCP 1262 by aqueous two-phase systems (PEG/sulfate).

    Science.gov (United States)

    Nascimento, Thiago Pajeú; Sales, Amanda Emmanuelle; Porto, Camila Souza; Brandão, Romero Marcos Pedrosa; de Campos-Takaki, Galba Maria; Teixeira, José Antônio Couto; Porto, Tatiana Souza; Porto, Ana Lúcia Figueiredo; Converti, Attilio

    2016-07-01

    A fibrinolytic protease from M. subtilissimus UCP 1262 was recovered and partially purified by polyethylene glycol (PEG)/sodium sulfate aqueous two-phase systems (ATPS). The simultaneous influence of PEG molar mass, PEG concentration and sulfate concentration on the enzyme recovery was first investigated using a 2(3) full factorial design, and the Response Surface Methodology used to identify the optimum conditions for enzyme extraction by ATPS. Once the best PEG molar mass for the process had been selected (6000g/mol), a two-factor central composite rotary design was applied to better evaluate the effects of the other two independent variables. The fibrinolytic enzyme was shown to preferentially partition to the bottom phase with a partition coefficient (K) ranging from 0.2 to 0.7. The best results in terms of enzyme purification were obtained with the system formed by 30.0% (w/w) PEG 6000g/mol and 13.2% (w/w) sodium sulfate, which ensured a purification factor of 10.0, K of 0.2 and activity yield of 102.0%. SDS-PAGE and fibrin zymography showed that the purified protease has a molecular mass of 97kDa and an apparent isoelectric point of 5.4. When submitted to assays with different substrates and inhibitors, it showed selectivity for succinyl-l-ala-ala-pro-l-phenylalanine-p-nitroanilide and was almost completely inhibited by phenylmethylsulfonyl fluoride, behaving as a chymotrypsin-like protease. At the optimum temperature of 37°C, the enzyme residual activity was 94 and 68% of the initial one after 120 and 150min of incubation, respectively. This study demonstrated that M. subtilissimus protease has potent fibrinolytic activity compared with similar enzymes produced by solid-state fermentation, therefore it may be used as an agent for the prevention and therapy of thrombosis. Furthermore, it appears to have the advantages of low cost production and simple purification. PMID:27183214

  16. Transformation of Vesicles in Aqueous Two-Phase System of an Anionic Gemini Surfactant and a Cationic Conventional Surfactant Mixture

    Institute of Scientific and Technical Information of China (English)

    JIANG Rong; HUANG Yi-Xiong; ZHAO Jian-Xi; HUANG Chang-Cang

    2008-01-01

    Transformation of vesicles formed in DTAB/C11-p-PhCNa aqueous surfactant two-phase (ASTP) was observed by the transmission electron microscopy (TEM). The trans-conformation of the gemini surfactant in the aggregates was considered to be the important factor for constructing the multi-lamellar structure of the vesicle wall. The cation-π interaction between the quaternary ammonium cation and the aromatic ring in the spacer was determined by the UV-Vis spectrum analysis, which, as well as the general electrostatic attraction and hydrophobic force, contributes to the stability of the multi-lamellar structure. The concentrations of the surface-active ions were measured for understanding the mechanism of vesicle transformation. The results show that isoelectric mixing of the two components benefits the growth of vesicles both in size and wall thickness.

  17. Liquid-liquid equilibrium of water + PEG 8000 + magnesium sulfate or sodium sulfate aqueous two-phase systems at 35°C: experimental determination and thermodynamic modeling

    Directory of Open Access Journals (Sweden)

    B. D. Castro

    2005-09-01

    Full Text Available Liquid-liquid extraction using aqueous two-phase systems is a highly efficient technique for separation and purification of biomolecules due to the mild properties of both liquid phases. Reliable data on the phase behavior of these systems are essential for the design and operation of new separation processes; several authors reported phase diagrams for polymer-polymer systems, but data on polymer-salt systems are still relatively scarce. In this work, experimental liquid-liquid equilibrium data on water + polyethylene glycol 8000 + magnesium sulfate and water + polyethylene glycol 8000 + sodium sulfate aqueous two-phase systems were obtained at 35°C. Both equilibrium phases were analyzed by lyophilization and ashing. Experimental results were correlated with a mass-fraction-based NRTL activity coefficient model. New interaction parameters were estimated with the Simplex method. The mean deviations between the experimental and calculated compositions in both equilibrium phases is about 2%.

  18. Study of the applicability of non-conventional aqueous two-phase systems in counter-current and centrifugal partition chromatography.

    Science.gov (United States)

    Bezold, Franziska; Goll, Johannes; Minceva, Mirjana

    2015-04-01

    Aqueous two-phase systems composed of imidazolium-based ionic liquids and phosphate salts were evaluated for their applicability in liquid-liquid chromatography. The influence of the nature of ionic liquid anion and cation on the partitioning of bovine serum albumin, lysozyme and myoglobin was investigated. A mixture of K2HPO4 and KH2PO4 in a ratio of 1.82:1 wt/wt was used in all of the tested biphasic systems to adjust the pH to a range of 7-8. The results show that more hydrophobic cations decrease the partition coefficients of the proteins in the biphasic systems and outweigh the effect of the anion on the distribution of the macromolecules. Viscosities and densities of the biphasic systems were in a suitable range for liquid-liquid chromatography. Even though the partition coefficients were too high for a conventional batch operation mode, these aqueous two-phase systems show favorable properties for protein capturing in liquid-liquid chromatographic columns. Additionally, the possible application of ionic liquids as modifiers in polyethylene glycol (PEG)-based aqueous two-phase systems was investigated. It could be demonstrated that ionic liquids alter the partition coefficients of the proteins. PMID:25736304

  19. A Novel Aqueous Two Phase System Composed of Surfactant and Xylitol for the Purification of Lipase from Pumpkin (Cucurbita moschata Seeds and Recycling of Phase Components

    Directory of Open Access Journals (Sweden)

    Mehrnoush Amid

    2015-06-01

    Full Text Available Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was investigated. Moreover, the effect of system pH and crude load on the degree of purification and yield of the purified lipase were studied. The results indicated that the lipase was partitioned into the top surfactant rich phase while the impurities partitioned into the bottom xylitol-rich phase using an aqueous two phase system composed of 24% (w/w Triton X-100 and 20% (w/w xylitol, at 56.2% of tie line length (TLL, (TTL is one of the important parameters in this study and it is determined from a bimodal curve in which the tie-line connects two nodes on the bimodal, that represent concentration of phase components in the top and bottom phases and a crude load of 25% (w/w at pH 8.0. Recovery and recycling of components was also measured in each successive step process. The enzyme was successfully recovered by the proposed method with a high purification factor of 16.4 and yield of 97.4% while over 97% of the phase components were also recovered and recycled. This study demonstrated that the proposed novel aqueous two phase system method is more efficient and economical than the traditional aqueous two phase system method for the purification and recovery of the valuable enzyme lipase.

  20. A Novel Aqueous Two Phase System Composed of Surfactant and Xylitol for the Purification of Lipase from Pumpkin (Cucurbita moschata) Seeds and Recycling of Phase Components.

    Science.gov (United States)

    Amid, Mehrnoush; Manap, Mohd Yazid; Hussin, Muhaini; Mustafa, Shuhaimi

    2015-01-01

    Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was investigated. Moreover, the effect of system pH and crude load on the degree of purification and yield of the purified lipase were studied. The results indicated that the lipase was partitioned into the top surfactant rich phase while the impurities partitioned into the bottom xylitol-rich phase using an aqueous two phase system composed of 24% (w/w) Triton X-100 and 20% (w/w) xylitol, at 56.2% of tie line length (TLL), (TTL is one of the important parameters in this study and it is determined from a bimodal curve in which the tie-line connects two nodes on the bimodal, that represent concentration of phase components in the top and bottom phases) and a crude load of 25% (w/w) at pH 8.0. Recovery and recycling of components was also measured in each successive step process. The enzyme was successfully recovered by the proposed method with a high purification factor of 16.4 and yield of 97.4% while over 97% of the phase components were also recovered and recycled. This study demonstrated that the proposed novel aqueous two phase system method is more efficient and economical than the traditional aqueous two phase system method for the purification and recovery of the valuable enzyme lipase. PMID:26091076

  1. Design and development of single stage purification of papain using Ionic Liquid based aqueous two phase extraction system and its Partition coefficient studies

    Directory of Open Access Journals (Sweden)

    Senthilkumar Rathnasamy

    2013-04-01

    Full Text Available As an emerging trend in bioseparation, aqueous two phase extractions based on phosponium ionic liquid have been utilized in this work to extract papain from Carica papaya fruit latex and the same wascompared with conventional aqueous two phase extraction system. Factors affecting the partition coefficient of papain such as ionic liquid concentration, pH of the extraction system and temperature have been investigated. The optimization studies show that ionic liquid concentrations and pH are majorly influencing the phaseformations and papain partitioning. It reveals the importance of electrostatic and hydrophobic interactions in the papain partitioning. Purification studies performed on Gel Filtration Chromatography shows that 96% of the papain enzyme could be extracted with the phosponium based ionic liquid in a single stage extraction. The final fraction containing papain enzyme was confirmed by SDS Page analysis.

  2. Simultaneous separation/enrichment and detection of trace ciprofloxacin and lomefloxacin in food samples using thermosensitive smart polymers aqueous two-phase flotation system combined with HPLC.

    Science.gov (United States)

    Lu, Yang; Chen, Bo; Yu, Miao; Han, Juan; Wang, Yun; Tan, Zhenjiang; Yan, Yongsheng

    2016-11-01

    Smart polymer aqueous two phase flotation system (SPATPF) is a new separation and enrichment technology that integrated the advantages of the three technologies, i.e., aqueous two phase system, smart polymer and flotation sublation. Ethylene oxide and propylene oxide copolymer (EOPO)-(NH4)2SO4 SPATPF is a pretreatment technique, and it is coupled with high-performance liquid chromatography to analyze the trace ciprofloxacin and lomefloxacin in real food samples. The optimized conditions of experiment were determined in the multi-factor experiment by using response surface methodology. The flotation efficiency of lomefloxacin and ciprofloxacin was 94.50% and 98.23% under the optimized conditions. The recycling experimentsshowed that the smart polymer EOPO could use repeatedly, which will reduce the cost in the future application. PMID:27211613

  3. pH recycling aqueous two-phase systems applied in extraction of Maitake β-Glucan and mechanism analysis using low-field nuclear magnetic resonance.

    Science.gov (United States)

    Hou, Huiyun; Cao, Xuejun

    2015-07-31

    In this paper, a recycling aqueous two-phase systems (ATPS) based on two pH-response copolymers PADB and PMDM were used in purification of β-Glucan from Grifola frondosa. The main parameters, such as polymer concentration, type and concentration of salt, extraction temperature and pH, were investigated to optimize partition conditions. The results demonstrated that β-Glucan was extracted into PADB-rich phase, while impurities were extracted into PMDM-rich phase. In this 2.5% PADB/2.5% PMDM ATPS, 7.489 partition coefficient and 96.92% extraction recovery for β-Glucan were obtained in the presence of 30mmol/L KBr, at pH 8.20, 30°C. The phase-forming copolymers could be recycled by adjusting pH, with recoveries of over 96.0%. Furthermore, the partition mechanism of Maitake β-Glucan in PADB/PMDM aqueous two-phase systems was studied. Fourier transform infrared spectra, ForteBio Octet system and low-field nuclear magnetic resonance (LF-NMR) were introduced for elucidating the partition mechanism of β-Glucan. Especially, LF-NMR was firstly used in the mechanism analysis in partition of aqueous two-phase systems. The change of transverse relaxation time (T2) in ATPS could reflect the interaction between polymers and β-Glucan. PMID:26094138

  4. A Novel Aqueous Two Phase System Composed of Surfactant and Xylitol for the Purification of Lipase from Pumpkin (Cucurbita moschata) Seeds and Recycling of Phase Components

    OpenAIRE

    Mehrnoush Amid; Mohd Yazid Manap; Muhaini Hussin; Shuhaimi Mustafa

    2015-01-01

    Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was invest...

  5. Production of dry Lactobacillus rhamnosus GG preparations by spray drying and lyophilization in aqueous two-phase systems

    Directory of Open Access Journals (Sweden)

    Katarzyna Leja

    2009-12-01

    Full Text Available Background. Drying is the oldest method of food preservation. It works by removing water from the food, which prevents the growth of microorganisms and decay. Moreover, spray or freeze drying is also used for the preservation of probiotic cultures. The aim of this study was to compare a survival rate of probiotic bacteria Lactobacillus rhamnosus during spray and freeze drying in ATPS. These results were also compared with survival rate of cells dried under the same conditions but suspended only in skim milk, 6% solution of PVP or 6% solution of dextran. Material and methods. The bacteria Lactobacillus rhamnosus GGwere suspended and spray or freeze dried in various types of aqueous two-phase emulsions: PVP/dextran, PEG4000/dextran and PEG8000/dextran. These emulsions consisted of different types of polymers and had varying ratio of polymers in dispersed (dextran and dispersing (PEG and PVP phases. Results. The research demonstrated that survival rate of bacteria directly after drying depended mainly on protective reagent, rather than on drying method. After 30-day-storage of the dried bacteria cell specimens, the highest survival rate was noted in case of freeze dried cells in milk. In case of spray drying the highest cell survival rate was observed when emulsion PVP3.6%/dextran2.4% was used as a drying medium. Conclusions. Finally, it has been found that cell survival rate was not strongly influenced by the storage temperature of the powder but it depended on the drying medium.  

  6. Countercurrent Chromatographic Separation of Lipophilic Ascorbic Acid Derivatives and Extract from Kadsura Coccinea Using Hydrophobic Organic-Aqueous Two-Phase Solvent Systems

    OpenAIRE

    Shinomiya, Kazufusa; Li, Heran; Kitanaka, Susumu; Ito, Yoichiro

    2009-01-01

    Countercurrent chromatographic (CCC) separation of lipophilic ascorbic acid derivatives and the crude extract from Kadsura Coccinea was performed using the type-J multilayer coil planet centrifuge with a hydrophobic organic-aqueous two-phase solvent system composed of n-hexane/ethyl acetate/ethanol/aqueous 0.1% trifluoroacetic acid at the volume ratio of (5 : 5 : 6 : 2). The lipophilic ascorbic acid derivatives were separated in the order of L-ascrobyl 2,6-dibutyrate, L-ascorbyl 6-palmitate a...

  7. Cell separation by immunoaffinity partitioning with polyethylene glycol-modified Protein A in aqueous polymer two-phase systems

    Science.gov (United States)

    Karr, Laurel J.; Van Alstine, James M.; Snyder, Robert S.; Shafer, Steven G.; Harris, J. Milton

    1988-01-01

    Previous work has shown that polyethylene glycol (PEG)-bound antibodies can be used as affinity ligands in PEG-dextran two-phase systems to provide selective partitioning of cells to the PEG-rich phase. In the present work it is shown that immunoaffinity partitioning can be simplified by use of PEG-modified Protein A which complexes with unmodified antibody and cells and shifts their partitioning into the PEG-rich phase, thus eliminating the need to prepare a PEG-modified antibody for each cell type. In addition, the paper provides a more rigorous test of the original technique with PEG-bound antibodies by showing that it is effective at shifting the partitioning of either cell type of a mixture of two cell populations.

  8. Liquid-Liquid Equilibria of Aqueous Two-phase Systems Containing Polyethylene Glycol 4000 and Two Different Salts of Ammonium

    Directory of Open Access Journals (Sweden)

    G. Khayati

    2011-02-01

    Full Text Available The aim of this study was to survey on phase diagrams and Liquid-Liquid Equilibrium (LLE data of the aqueous PEG4000 - (NH42HPO4 and PEG4000 - (NH42SO4 systems experimentally at 298.15 K. The salting-out effect was also discussed on the basis of the Gibbs free energy of hydration of ions. The experimental binodal data were satisfactorily correlated with the Merchuk equation. Tie line compositions were correlated using the Othmer-Tobias and Bancroft equations, and the parameters have also reported. Good agreement was obtained with the experimental data with the model equations.

  9. Chelate-Modified Fenton Reaction for the Degradation of Trichloroethylene in Aqueous and Two-Phase Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Scott [Univ of KY, dept of chemical and materials engineering; lynch, Andrew [Univ of KY, dept of chemical and materials engineering; Bachas, Leonidas [Univ of KY, Dept of Chemistry; hampson, Steve [Univ of KY Center for Applied Energy Research - KY Research Consortium of Energy and Environment; Ormsbee, Lindelle [Univ of KY Center for Applied Energy Research - KY Research Consortium of Energy and Environment; Bhattacharyya, Dibakar [Univ of KY, dept of chemical and materials engineering

    2008-06-01

    The Standard Fenton reaction has been used for In-Situ Chemical Oxidation (ISCO) of toxic organics in groundwater. However, it requires low pH operating conditions, and thus has limitations for in situ applications. In addition, hydroxyl radicals are rapidly consumed by hydroxyl scavengers found in the subsurface. These problems are alleviated through the chelate-modified Fenton (hydroxyl radical) reaction, which includes the addition of nontoxic chelate (L) such as citrate or gluconic acid. This chelate allows the reaction to take place at bear neutral pH and control hydrogen peroxide consumption by binding to Fe(II), forming an FeL complex. The chelate also binds to Fe(III), preventing its precipitation as ferric hydroxide and thus prevents problems associated with injection well plugging. The rate of TCE dechlorination in chelate-modified Fenton systems is a function of pH, H2O2 concentration, and FE:L ratio. The primary objective of this research is to model and apply this process to the destruction of trichloroethylene (TCE) present in both the aqueous and organic (in the form of droplets) phases. Experimentation proved the chelate-modified Fenton reaction effectively dechlorinates TCE in both the aqueous and organic phases at near-neutral pH. Other focuses of this work include determining the effect of [L]:[Fe] ratios on H2O2 and TCE degradation as well as reusability of the FE citrate solution under repeated H2O2 injections. Generalized models were developed to predict the concentration of TCE in the aqueous phase and TCE droplet radius as a function of time using established hydroxyl radial kinetics and mass transfer relationships.

  10. Distribution and speciation of cesium, strontium, and europium in the aqueous two-phase system milk-pectin

    International Nuclear Information System (INIS)

    Partition of radionuclides in aqueous liquid-liquid systems allows speciation of bioinorganic forms under nondenaturing conditions. From the fresh pasteurized skim bovine milk spiked with respective radionuclides and agitated with 4% w/w water solution of apple pectin, about 80% of cesium, 22% of strontium and less than 1.5% of europium is recovered with the pectin, phase at an initial milk - pectin volume ratio of 7:3. This recovery fraction is proportional to the abundance of radionuclides in milk serum. No protein bound fraction of strontium extractable by Aerosol OT in isooctane was obtained. More than 3-fold preconcentration of strontium and europium radionuclides in milk is achieved after 10-15 min membraneless osmosis with pectin phase. (author) 26 refs.; 6 tabs

  11. Liquid-liquid equilibrium and partitioning features of bovine trypsin in Ucon 50 HB5100 /sodium citrate aqueous two phase systems

    OpenAIRE

    Tubío, Gisela; Venâncio, Armando; J. A. Teixeira; Nerli, Bibiana B.; Picó, Guillermo A.

    2008-01-01

    The phase diagrams of Ucon 50-HB-5100, a non-ionic random copolymer of ethylene oxide and propylene oxide (EOPO) and sodium citrate aqueous two-phase systems were determined at different pHs (5.20 and 8.20) and temperatures (5, 20 and 40º C). The binodal curves were determined by refractive index and enzymatic assay of the solution and described using a four-parameter sigmoidal equation, the reliability of the measured tie line compositions was ascertained by correlation equations...

  12. A microdevice assisted approach for the preparation, characterization and selection of continuous aqueous two-phase systems: from micro to bench-scale.

    Science.gov (United States)

    Vázquez-Villegas, Patricia; Ouellet, Eric; González, Claudia; Ruiz-Ruiz, Federico; Rito-Palomares, Marco; Haynes, Charles A; Aguilar, Oscar

    2016-07-01

    Aqueous two-phase systems (ATPS) have emerged as an alternative strategy for the recovery and purification of a wide variety of biological products. Typical process development requires a large screening of experimental conditions towards industrial adoption where continuous processes are preferred. In this work, it was proved that under certain flow conditions, ATPS could be formed continuously inside a microchannel, starting from stocks of phase components. Staggered herringbone chaotic micromixers included within the device sequentially and rapidly prepare two-phase systems across an entire range of useful phase compositions. Two-phase diagrams (binodal curves) were easily plotted using the cloud-point method for systems of different components and compared with previously reported curves for each system, proving that phase formation inside the device correlated with the previously reported diagrams. A proof of concept for sample partitioning in such a microdevice was performed with two different experimental models: BSA and red blood cells. Finally, the microdevice was employed to obtain information about the recovery and partition coefficient of invertase from a real complex mixture of proteins (yeast extract) to design a process for the recovery of the enzyme selecting a suitable system and composition to perform the process at bench-scale. PMID:27302418

  13. Physicochemical characterization of novel aqueous two-phase system: gemini surfactant 12-2-12/NaBr/H2O.

    Science.gov (United States)

    Yue, Ling; He, Zimeng; Zhu, Yunfeng; Shang, Yazhuo; Liu, Honglai

    2015-04-01

    A novel aqueous two-phase system (ATPS) only containing Gemini surfactant ethanediyl-1,2-bis(dodecyldimethylammonium bromide) and an inorganic salt sodium bromide was designed, and the physicochemical properties of the ATPS were investigated systematically. The results have shown that the coexisting two phases, one surfactant-rich and the other salt-rich, are stable and the phase behavior, volume ratio, and extraction efficiency of ATPS are strongly influenced by contents of surfactant and salt. The novel ATPS here investigated have potential application in partitioning and analysis of biomaterials. Compared with other complicated surfactant-based ATPS, the surfactant concentration for the formation of ATPS is much lower, which implies that the studied system is potentially more economical for purification and separation of biomaterials. Meanwhile, the surfactant can be recycled by altering salt concentration in ATPS. Lyotropic liquid crystal was found in the bottom phase besides micelles under different conditions. The salting-out effect may be the driving force of ATPS formation for the studied "living polymer"/salt system. However, the coexistence of micelles with different microstructures is the necessary condition of phase separation. The current studies not only present a new ATPS for partitioning and analysis of biomaterials but also have a great significance on rational use of Gemini surfactants. PMID:25649445

  14. Calculation of liquid-liquid equilibrium of aqueous two-phase systems using a chemical-theory-based excess Gibbs energy model

    Directory of Open Access Journals (Sweden)

    Pessôa Filho P. A.

    2004-01-01

    Full Text Available Mixtures containing compounds that undergo hydrogen bonding show large deviations from ideal behavior. These deviations can be accounted for through chemical theory, according to which the formation of a hydrogen bond can be treated as a chemical reaction. This chemical equilibrium needs to be taken into account when applying stability criteria and carrying out phase equilibrium calculations. In this work, we illustrate the application of the stability criteria to establish the conditions under which a liquid-phase split may occur and the subsequent calculation of liquid-liquid equilibrium using a chemical-theory-modified Flory-Huggins equation to describe the non ideality of aqueous two-phase systems composed of poly(ethylene glycol and dextran. The model was found to be able to correlate ternary liquid-liquid diagrams reasonably well by simple adjustment of the polymer-polymer binary interaction parameter.

  15. Extraction of Dengue 2 Plasmid DNA Vaccine (pD2) from Cell Lysates by Aqueous Two-Phase Systems

    OpenAIRE

    Keila Aparecida Moreira; Adilson Castro Chaves; Ernesto Torres Marques; Duarte Miguel Ferreira Prazeres; Walter Mendes de Azevedo; Ana Lucia Figueiredo Porto; Jose Luiz de Lima Filho

    2007-01-01

    This research describes the partitioning in PEG/phosphate systems of the plasmid pD2, a dengue 2 plasmid DNA vaccine, present in a clarified E. coli alkaline lysate. Factors that affect the partition as PEG molecular weight, plasmid concentration and the lysate volume loaded in the system were investigated. Results showed that partition behavior of plasmid DNA depends on the system molecular weight, a considerable amount of protein of the cell lysate was accumulated in the interphase of the s...

  16. Extraction of Theanine from Waste Liquid of Tea Polyphenol Production in Aqueous Two-phase Systems with Cationic and Anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    ZHANG Junwei; WANG Yan; PENG Qijun

    2013-01-01

    Extraction of theanine from waste liquid of tea polyphenol production was studied in aqueous surfactant two-phase system (ASTP) with cationic suffactant (CTAB) and anionic surfactant (SDS).Results indicate that the region of ASTP is narrow and there is only a two-phase region of cationic surfactant.The increase in concentrations of NaBr and Na2SO4 are beneficial to the formation of ASTP.Theanine concentration in the bottom phase increases with increasing concentration of theanine,whereas the partition coefficient and extraction rate only change a little when the concentration of theanine is above 0.2 g· L-1.With the increase of SDS concentration,the phase ratio and the partition coefficient decrease,while the extraction efficiency of theanine increases and the concentration of theaninc changes a little in the range from 2.4/7.5 to 2.8/7.2 for SDS/CTAB ratio.The temperature has a notable effect on the concentration of theanine in the bottom phase,partition coefficient and extraction rate of theanine.The increase of waste liquid decreases the phase ratio,increases the concentration and extraction rate of theanine in the bottom phase,since the protein and the saccharide enter the bottom phase with theanine.

  17. Prediction of liquid-liquid equilibria for polyethylene glycol based aqueous two-phase system by ASOG and UNIFAC method

    Directory of Open Access Journals (Sweden)

    M. Perumalsamy

    2009-03-01

    Full Text Available Liquid-Liquid equilibrium data were obtained for the polyethylene glycol2000(PEG2000-sodium citrate-water system at 298.15, 308.15 and 318.15 K. The effect of temperature on binodal and tie line data was studied and published in a previous article (Murugesan and Perumalsamy, 2005. The interaction parameters of ASOG and UNIFAC models were estimated using the LLE data of PEG2000-sodium citrate-water system and are used to predict the LLE data for PEG6000-sodium citrate-water system at 298.15, 308.15 and 318.15 K (literature data. The predicted LLE data by both ASOG and UNIFAC models showed good agreement with the experimental and literature data.

  18. (Liquid + liquid) and (liquid + solid) equilibrium of aqueous two-phase systems containing poly ethylene glycol di-methyl ether 2000 and di-sodium hydrogen phosphate

    International Nuclear Information System (INIS)

    (Liquid + liquid) equilibrium (LLE) for the {poly ethylene glycol di-methyl ether 2000 (PEGDME2000) + Na2HPO4 + H2O} system have been determined experimentally at T = (298.15, 308.15, 313.15, and 318.15) K. The effects of temperature on the binodals and tie-lines for the investigated aqueous two-phase system (ATPS) have been studied. An empirical non-linear expression developed by Merchuk was used for reproducing the experimental binodal data. In this work, the three fitting parameters of the Merchuk equation were obtained with the temperature dependence expressed in the linear form with (T - T0) K as a variable. Furthermore, the modified local composition segment-based NRTL and Wilson models and also osmotic virial equation were used to describe the LLE data of the studied system. Also, the effects of the type of salt on LLE are discussed. In addition, the effects of end groups of the polymers PEGDME2000 and poly ethylene glycol 2000 on phase forming ability were studied. The complete phase diagram for the poly ethylene {glycol di-methyl ether 2000 (PEGDME2000) + Na2HPO4 + H2O} system has also been determined at T = 298.15 K.

  19. Direct Purification of Pectinase from Mango (Mangifera Indica Cv. Chokanan Peel Using a PEG/Salt-Based Aqueous Two Phase System

    Directory of Open Access Journals (Sweden)

    Abdul Manap Mohd Yazid

    2011-10-01

    Full Text Available An Aqueous Two-Phase System (ATPS was employed for the first time for the separation and purification of pectinase from mango (Mangifera Indica Cv. Chokanan peel. The effects of different parameters such as molecular weight of the polymer (polyethylene glycol, 2,000–10,000, potassium phosphate composition (12–20%, w/w, system pH (6–9, and addition of different concentrations of neutral salts (0–8%, w/w on partition behavior of pectinase were investigated. The partition coefficient of the enzyme was decreased by increasing the PEG molecular weight. Additionally, the phase composition showed a significant effect on purification factor and yield of the enzyme. Optimum conditions for purification of pectinase from mango peel were achieved in a 14% PEG 4000-14% potassium phosphate system using 3% (w/w NaCl addition at pH 7.0. Based on this system, the purification factor of pectinase was increased to 13.2 with a high yield of (97.6%. Thus, this study proves that ATPS can be an inexpensive and effective method for partitioning of pectinase from mango peel.

  20. Aqueous two-phase system cold-set gelation using natural and recombinant probiotic lactic acid bacteria as a gelling agent.

    Science.gov (United States)

    Léonard, Lucie; Husson, Florence; Langella, Philippe; Châtel, Jean-Marc; Saurel, Rémi

    2016-05-01

    The present study aimed to entrap probiotic lactic acid bacteria (LAB) in a sodium alginate and sodium caseinate aqueous two-phase gel system. The natural acidifying properties of two therapeutic probiotic LAB were exploited to liberate calcium ions progressively from calcium carbonate (CaCO3), which caused the gelation of the co-existing phases. Bi-biopolymeric matrix gelation of GDL/CaCO3 or LAB/CaCO3 was monitored by dynamic rheological measurements, and the final gels were characterized by frequency dependence measurements and confocal laser scanning microscopy. Weak to strong gels were formed with an elastic modulus G' from 10 to 1.000Pa, respectively. After cold-set gelation of our system, confocal laser scanning microscopy showed spherical protein microdomains trapped within a calcium alginate network. LAB cells were stained to study their partition in the self-gelling matrices. Our LAB strains showed two different behaviors, which may relate to the exopolysaccharide production: (i) Lactobacillus plantarum CNRZ1997 cells were found mainly in continuous alginate networks, whereas (ii) Lactococcus lactis cells were localized in protein microdomains. This alginate-caseinate phase-separated system that was self-gelled by LAB cells may be an innovative approach for immobilizing and protecting LAB cells. PMID:26874119

  1. Extraction protease expressed by Penicillium fellutanum from the Brazilian savanna using poly(ethylene glycol)/sodium polyacrylate/NaCl aqueous two-phase system.

    Science.gov (United States)

    Barros, Kleber V G; Souza, Paula M; Cardoso, Samuel L; Borges, Leonardo L; Filho, Edivaldo X F; Junior, Adalberto P; Magalhães, Pérola O

    2015-01-01

    The partitioning of protease expressed by Penicillium fellutanum from the Brazilian savanna in a novel inexpensive and stable aqueous two-phase system (ATPS) composed of poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA) was studied in this work using factorial design. The ATPS is formed by mixing both polymers with a salt (NaCl) and fermented broth of P. fellutanum. The effects of molar mass (2,000, 4,000, and 6,000 g ⋅ mol(-1)) and concentration (6, 8, and 10 wt%) of PEG and that of NaPA concentration (6, 8, and 10 wt%) on protease partitioning (K) at 25 °C were studied. A two-level factorial design (2(3)) was implemented. The effect of Na2 SO4 concentration (5, 10, and 15 wt%) on the reextraction of the enzyme was also analyzed. The partition coefficient K ranged from 77.51 to 1.21, indicating the versatility of the method. The reextraction was achieved with the addition of 5% Na2 SO4 , allowing the partitioning of the protease to the upper phase, whereas total proteins were directed to the bottom phase. The results of partitioning using the PEG/NaPA/NaCl system and that of the subsequent reextraction with Na2 SO4 suggest that this method can be used to purify proteases from fermented broth of P. fellutanum. PMID:25546578

  2. Ionic liquid-based ultrasound-assisted extraction and aqueous two-phase system for analysis of caffeoylquinic acids from Flos Lonicerae Japonicae.

    Science.gov (United States)

    Tan, Ting; Lai, Chang-Jiang-Sheng; OuYang, Hui; He, Ming-Zhen; Feng, Yulin

    2016-02-20

    In this work, an ionic liquid-based ultrasonic-assisted extraction (ILUAE) method was developed to extract caffeoylquinic acids (CQAs) from Flos Lonicerae Japonicae (FLJ). ILUAE parameters were optimized by response surface methodology, including IL concentration, ultrasonic time, and liquid-solid ratio. Optimized ILUAE approach gained the highest extraction yields of 28.53, 18.21, 3.84mg/g for 3-O-caffeoylquinic acid (C1), 3,5-di-O-caffeoylquinic acid (C2), 3,4-di-O-caffeoylquinic acid (C3), respectively. C1-C3 are the three most abundant CQAs compounds in FLJ. The method showed comparable extraction yield and shorter extraction time compared with conventional extraction techniques. Subsequently, an aqueous two-phase system (ATPS) was applied in extraction solutions. Two trace CQAs, 5-O-caffeoylquinic acid (C4) and 4,5-di-O-caffeoylquinic acid (C5), were significantly enriched with signal to noise values increasing from less than 10 to higher than 1475. The results indicated that ILUAE and ATPS are efficient and environmentally-friendly sample extraction and enrichment techniques for CQAs from herbal medicines. PMID:26730510

  3. Production of γ-cyclodextrin by Bacillus cereus cyclodextrin glycosyltransferase using extractive bioconversion in polymer-salt aqueous two-phase system.

    Science.gov (United States)

    Lin, Yu Kiat; Show, Pau Loke; Yap, Yee Jiun; Ariff, Arbakariya B; Mohammad Annuar, Mohammad Suffian; Lai, Oi Ming; Tang, Teck Kim; Juan, Joon Ching; Ling, Tau Chuan

    2016-06-01

    Aqueous two-phase system (ATPS) extractive bioconversion provides a technique which integrates bioconversion and purification into a single step process. Extractive bioconversion of gamma-cyclodextrin (γ-CD) from soluble starch with cyclodextrin glycosyltransferase (CGTase, EC 2.4.1.19) enzyme derived from Bacillus cereus was evaluated using polyethylene glycol (PEG)/potassium phosphate based on ATPS. The optimum condition was attained in the ATPS constituted of 30.0% (w/w) PEG 3000 g/mol and 7.0% (w/w) potassium phosphate. A γ-CD concentration of 1.60 mg/mL with a 19% concentration ratio was recovered after 1 h bioconversion process. The γ-CD was mainly partitioned to the top phase (YT=81.88%), with CGTase partitioning in the salt-rich bottom phase (KCGTase=0.51). Repetitive batch processes of extractive bioconversion were successfully recycled three times, indicating that this is an environmental friendly and a cost saving technique for γ-CD production and purification. PMID:26702953

  4. Separation of Cd and Ni from Ni-Cd batteries by an environmentally safe methodology employing aqueous two-phase systems

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Vania Goncalves; Mageste, Aparecida Barbosa; Santos, Igor Jose Boggione; da Silva, Luis Henrique Mendes; da Silva, Maria do Carmo Hespanhol [Grupo de Quimica Verde Coloidal e Macromolecular, Departamento de Quimica, Centro de Ciencias e Tecnologicas, Universidade Federal de Vicosa, Av. P.H. Rolfs s/n, Campus da UFV, Vicosa, 36570-000 (Brazil)

    2009-09-05

    The separation of Cd and Ni from Ni-Cd batteries using an aqueous two-phase system (ATPS) composed of copolymer L35, Li{sub 2}SO{sub 4} and water is investigated. The extraction behavior of these metals from the bottom phase (BP) to the upper phase (UP) of the ATPS is affected by the amount of added extractant (potassium iodide), tie-line length (TLL), mass ratio between the phases of the ATPS, leaching and dilution factor of the battery samples. Maximum extraction of Cd (99.2 {+-} 3.1)% and Ni (10.6 {+-} 0.4)% is obtained when the batteries are leached with HCl, under the following conditions: 62.53% (w/w) TLL, concentration of KI equal to 50.00 mmol kg{sup -1}, mass ratio of the phases equal to 0.5 and a dilution factor of battery samples of 35. This novel methodology is efficient to separate the metals in question, with the advantage of being environmentally safe, since water is the main constituent of the ATPS, which is prepared with recyclable and biodegradable compounds. (author)

  5. Interrelationship between partition behavior of organic compounds and proteins in aqueous dextran-polyethylene glycol and polyethylene glycol-sodium sulfate two-phase systems.

    Science.gov (United States)

    Ferreira, Luisa A; da Silva, Nuno R; Wlodarczyk, Samarina R; Loureiro, Joana A; Madeira, Pedro P; Teixeira, José A; Uversky, Vladimir N; Zaslavsky, Boris Y

    2016-04-22

    Partition behavior of adenosine and guanine mononucleotides was examined in aqueous dextran-polyethylene glycol (PEG) and PEG-sodium sulfate two-phase systems. The partition coefficients for each series of mononucleotides were analyzed as a functions of the number of phosphate groups and found to be dependent on the nature of nucleic base and on the type of ATPS utilized. It was concluded that an average contribution of a phosphate group into logarithm of partition coefficient of a mononucleotide cannot be used to estimate the difference between the electrostatic properties of the coexisting phases of ATPS. The data obtained in this study were considered together with those for other organic compounds and proteins reported previously, and the linear interrelationship between logarithms of partition coefficients in dextran-PEG, PEG-Na2SO4 and PEG-Na2SO4-0.215M NaCl (all in 0.01M Na- or K/Na-phosphate buffer, pH 7.4 or 6.8) was established. Similar relationship was found for the previously reported data for proteins in Dex-PEG, PEG-600-Na2SO4, and PEG-8000-Na2SO4 ATPS. It is suggested that the linear relationships of the kind established in ATPS may be observed for biological properties of compounds as well. PMID:27016118

  6. Application of an aqueous two-phase micellar system to extract bromelain from pineapple (Ananas comosus) peel waste and analysis of bromelain stability in cosmetic formulations.

    Science.gov (United States)

    Spir, Lívia Genovez; Ataide, Janaína Artem; De Lencastre Novaes, Letícia Celia; Moriel, Patrícia; Mazzola, Priscila Gava; De Borba Gurpilhares, Daniela; Silveira, Edgar; Pessoa, Adalberto; Tambourgi, Elias Basile

    2015-01-01

    Bromelain is a set of proteolytic enzymes found in pineapple (Ananas comosus) tissues such as stem, fruit and leaves. Because of its proteolytic activity, bromelain has potential applications in the cosmetic, pharmaceutical, and food industries. The present study focused on the recovery of bromelain from pineapple peel by liquid-liquid extraction in aqueous two-phase micellar systems (ATPMS), using Triton X-114 (TX-114) and McIlvaine buffer, in the absence and presence of electrolytes CaCl2 and KI; the cloud points of the generated extraction systems were studied by plotting binodal curves. Based on the cloud points, three temperatures were selected for extraction: 30, 33, and 36°C for systems in the absence of salts; 40, 43, and 46°C in the presence of KI; 24, 27, and 30°C in the presence of CaCl2 . Total protein and enzymatic activities were analyzed to monitor bromelain. Employing the ATPMS chosen for extraction (0.5 M KI with 3% TX-114, at pH 6.0, at 40°C), the bromelain extract stability was assessed after incorporation into three cosmetic bases: an anhydrous gel, a cream, and a cream-gel formulation. The cream-gel formulation presented as the most appropriate base to convey bromelain, and its optimal storage conditions were found to be 4.0 ± 0.5°C. The selected ATPMS enabled the extraction of a biomolecule with high added value from waste lined-up in a cosmetic formulation, allowing for exploration of further cosmetic potential. PMID:25919128

  7. Optimization of Serine Protease Purification from Mango (Mangifera indica cv. Chokanan Peel in Polyethylene Glycol/Dextran Aqueous Two Phase System

    Directory of Open Access Journals (Sweden)

    Abdul Manap Mohd Yazid

    2012-03-01

    Full Text Available Mango peel is a good source of protease but remains an industrial waste. This study focuses on the optimization of polyethylene glycol (PEG/dextran-based aqueous two-phase system (ATPS to purify serine protease from mango peel. The activity of serine protease in different phase systems was studied and then the possible relationship between the purification variables, namely polyethylene glycol molecular weight (PEG, 4000–12,000 g·mol−1, tie line length (−3.42–35.27%, NaCl (−2.5–11.5% and pH (4.5–10.5 on the enzymatic properties of purified enzyme was investigated. The most significant effect of PEG was on the efficiency of serine protease purification. Also, there was a significant increase in the partition coefficient with the addition of 4.5% of NaCl to the system. This could be due to the high hydrophobicity of serine protease compared to protein contaminates. The optimum conditions to achieve high partition coefficient (84.2 purification factor (14.37 and yield (97.3% of serine protease were obtained in the presence of 8000 g·mol−1 of PEG, 17.2% of tie line length and 4.5% of NaCl at pH 7.5. The enzymatic properties of purified serine protease using PEG/dextran ATPS showed that the enzyme could be purified at a high purification factor and yield with easy scale-up and fast processing.

  8. Two-phase flow in refrigeration systems

    CERN Document Server

    Gu, Junjie; Gan, Zhongxue

    2013-01-01

    Two-Phase Flow in Refrigeration Systems presents recent developments from the authors' extensive research programs on two-phase flow in refrigeration systems. This book covers advanced mass and heat transfer and vapor compression refrigeration systems and shows how the performance of an automotive air-conditioning system is affected through results obtained experimentally and theoretically, specifically with consideration of two-phase flow and oil concentration. The book is ideal for university postgraduate students as a textbook, researchers and professors as an academic reference book, and b

  9. Extraction and Purification of Quercitrin, Hyperoside, Rutin, and Afzelin from Zanthoxylum Bungeanum Maxim Leaves Using an Aqueous Two-Phase System.

    Science.gov (United States)

    He, Fengyuan; Li, Dengwu; Wang, Dongmei; Deng, Ming

    2016-07-01

    In this study, an aqueous two-phase system (ATPS) based on ethanol/NaH2 PO4 was developed for the extraction and purification of quercitrin, hyperoside, rutin, and afzelin from Zanthoxylum bungeanum Maxim leaves. These 4 flavonoids were 1st extracted from dried Z. bungeanum leaves using a 60% ethanol solution and subsequently added to the ATPS for further purification. The partition behavior of the 4 flavonoids in ATPS was investigated. The optimal ATPS conditions were: 29% (w/w) NaH2 PO4 , 25% (w/w) ethanol concentration, 1% (w/w) added amount of leaf extracts, no pH adjustment, and repeated 1 h extractions at 25 °C. Under the optimal conditions for the 10 g ATPS, the absolute recovery of quercitrin, hyperoside, rutin, and afzelin reached 90.3%, 83.5%, 92.3%, and 89.1%, respectively. Compared to the 60% ethanol extracts, the content of quercitrin (44.8 mg/g), hyperoside (65.6 mg/g), rutin (56.4 mg/g), and afzelin (6.84 mg/g) in the extracts increased by 49.9%, 38.8%, 45.6%, and 36.8% respectively. The extracts after ATPS also exhibited stronger antioxidant activities, the 2,2-diphenyl-1-picrylhydrazyl IC50 value (10.5 μg/mL) decreased by 41.8%, and the 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt value (966 μmol Trolox/g) and ferric reducing power value (619 μmol Trolox/g) increased by 29.8% and 53.7%, respectively. Furthermore, scale-up experiments indicated that a larger scale experiment was feasible for the purification of the 4 flavonoids. PMID:27240023

  10. Tunable aqueous polymer-phase impregnated resins-technology-a novel approach to aqueous two-phase extraction.

    Science.gov (United States)

    van Winssen, F A; Merz, J; Schembecker, G

    2014-02-14

    Aqueous Two-Phase Extraction (ATPE) represents a promising unit operation for downstream processing of biotechnological products. The technique provides several advantages such as a biocompatible environment for the extraction of sensitive and biologically active compounds. However, the tendency of some aqueous two-phase systems to form intensive and stable emulsions can lead to long phase separation times causing an increased footprint for the required mixer-settler devices or the need for additional equipment such as centrifuges. In this work, a novel approach to improve ATPE for downstream processing applications called 'Tunable Aqueous Polymer-Phase Impregnated Resins' (TAPPIR(®))-Technology is presented. The technology is based on the immobilization of one aqueous phase inside the pores of a solid support. The second aqueous phase forms the bulk liquid around the impregnated solids. Due to the immobilization of one phase, phase emulsification and phase separation of ATPE are realized in a single step. In this study, a biodegradable and sustainable aqueous two-phase system consisting of aqueous polyethylene glycol/sodiumcitrate solutions was chosen. The impregnation of different macroporous glass and ceramic solids was investigated and could be proven to be stable. Additionally, the separation of the dye Patent blue V was successfully performed with the TAPPIR(®)-Technology. Thus, the "proof of principle" of this technology is presented. PMID:24462465

  11. Analytical applications of partitioning in aqueous two-phase systems: Exploring protein structural changes and protein-partner interactions in vitro and in vivo by solvent interaction analysis method.

    Science.gov (United States)

    Zaslavsky, Boris Y; Uversky, Vladimir N; Chait, Arnon

    2016-05-01

    This review covers the fundamentals of protein partitioning in aqueous two-phase systems (ATPS). Included is a review of advancements in the analytical application of solute partitioning in ATPS over the last two decades, with multiple examples of experimental data providing evidence that phase-forming polymers do not interact with solutes partitioned in ATPS. The partitioning of solutes is governed by the differences in solute interactions with aqueous media in the two phases. Solvent properties of the aqueous media in these two phases may be characterized and manipulated. The solvent interaction analysis (SIA) method, based on the solute partitioning in ATPS, may be used for characterization and analysis of individual proteins and their interactions with different partners. The current state of clinical proteomics regarding the discovery and monitoring of new protein biomarkers is discussed, and it is argued that the protein expression level in a biological fluid may be not the optimal focus of clinical proteomic research. Multiple examples of application of the SIA method for discovery of changes in protein structure and protein-partner interactions in biological fluids are described. The SIA method reveals new opportunities for discovery and monitoring structure-based protein biomarkers. PMID:26923390

  12. Separation, concentration and determination of chloramphenicol in environment and food using an ionic liquid/salt aqueous two-phase flotation system coupled with high-performance liquid chromatography.

    Science.gov (United States)

    Han, Juan; Wang, Yun; Yu, Cuilan; Li, Chunxiang; Yan, Yongsheng; Liu, Yan; Wang, Liang

    2011-01-31

    Ionic liquid-salt aqueous two-phase flotation (ILATPF) is a novel, green, non-toxic and sensitive samples pretreatment technique. ILATPF coupled with high-performance liquid chromatography (HPLC) was developed for the analysis of chloramphenicol, which combines ionic liquid aqueous two-phase system (ILATPS) based on imidazolium ionic liquid (1-butyl-3-methylimidazolium chloride, [C(4)mim]Cl) and inorganic salt (K(2)HPO(4)) with solvent sublation. In ILATPF systems, phase behaviors of the ILATPF were studied for different types of ionic liquids and salts. The sublation efficiency of chloramphenicol in [C(4)mim]Cl-K(2)HPO(4) ILATPF was influenced by the types of salts, concentration of K(2)HPO(4) in aqueous solution, solution pH, nitrogen flow rate, sublation time and the amount of [C(4)mim]Cl. Under the optimum conditions, the average sublation efficiency is up to 98.5%. The mechanism of ILATPF contains two principal processes. One is the mechanism of IL-salt ILATPS formation, the other is solvent sublation. This method was practical when applied to the analysis of chloramphenicol in lake water, feed water, milk, and honey samples with the linear range of 0.5-500 ng mL(-1). The method yielded limit of detection (LOD) of 0.1 ng mL(-1) and limit of quantification (LOQ) of 0.3 ng mL(-1). The recovery of CAP was 97.1-101.9% from aqueous samples of environmental and food samples by the proposed method. Compared with liquid-liquid extraction, solvent sublation and ionic liquid aqueous two-phase extraction, ILATPF can not only separate and concentrate chloramphenicol with high sublation efficiency, but also efficiently reduce the wastage of IL. This novel technique is much simpler and more environmentally friendly and is suggested to have important applications for the concentration and separation of other small biomolecules. PMID:21168562

  13. EFFECT OF ALCOHOL ON AQUEOUS TWO-PHASE SYSTEM PROPERTIES OF SDS/CTAB/H2O/Na2SO4 SYSTEM%醇对正负离子表面活性剂双水相性质的影响

    Institute of Scientific and Technical Information of China (English)

    滕弘霓; 王利

    2004-01-01

    The effect of alcohol on the aqueous two-phase system properties of SDS/CTAB/H2O/Na2SO4 system was studied by the pseudo ternary phase diagram. The electrostatic forces (both attraction and repulsion) between cationic surfactant and anionic surfactant decreased because of the interaction of alcohol hydroxyl group and surfactant polar group. As a result, the phase area width of aqueous two-phase system increased. Long chain alcohol (more than five carbonatoms), which was in high concentration in the SDS/CTAB/H2O/Na2SO4) system, caused the anionic aqueous two-phase system area to vanish and the cationic aqueous two-phase system area to become wider. The CTAB rich phase turned from top phase to bottom phase.

  14. Partition of proteins in aqueous two-phase systems based on Cashew-nut tree gum and poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    Leonie Asfora Sarubbo

    2004-09-01

    Full Text Available The partitioning of two proteins, bovine serum albumin (BSA and trypsin was studied in an aqueous poly(ethylene glycol(PEG- Cashew-nut tree gum system. The phase diagram was provided for Cashew-nut tree gum and PEG molecular weight of 1500 at two different temperatures. The influence of several parameters including concentrations of polymers, pH, salt addition and temperature on the partitioning of these proteins were investigated.. The results of this research demonstrated the importance of the protein characteristics for partitioning in aqueous biphasic system.A partição de duas proteínas, albumina de soro bovino (BSA e tripsina foi estudada no sistema bifásico aquoso Polietileno glicol(PEG - Goma do cajueiro. O diagrama de fases foi estabelecido para a Goma do Cajueiro e para PEG de peso molecular 1500 em duas diferentes temperaturas. A influência de vários parâmetros na partição destas proteínas, incluindo concentração dos polímeros, pH, adição de sal e temperatura foi investigada. Os resultados desta pesquisa demonstraram a importância das características da proteína na partição em sistemas bifásicos aquosos.

  15. Pectinases partitioning in aqueous two-phase systems: an integration of the systems poly(ethylene glycol/crude dextran and poly(ethylene glycol/ammonium sulphate

    Directory of Open Access Journals (Sweden)

    STANA N. PEJIN

    2004-04-01

    Full Text Available The partitioning of pectinases in the poly(ethylene glucol4000/ammonium sulpohate system was studied and also its application for enzymes extraction from the top phase of the poly(ethylene glucol4000/crude dextran system. Almost complete one-sided partition of endo-pectinase and exo-pectinase to the bottom phase of the polymer/salt system was achieved at a tie-line length of 37.16 %. The concentration factors were 1.73 and 3.25, respectively. The highest total endo- and exo-pectinase yields (72.41 % and 69.46 %, respectively were obtained by integration of the polymer/polymer system at a tie-line of 8.61 % and a high phase volume ratio and the polymer/salt system at a tie-line of 30.23 % and a low phase volume ratio. Integration of the partitioning at a high tie-line length in the polymer/polimer and a low tie-line length in the polymer/salt system resulted in a total concentration factor of 1.5 and a purification of 1.66 fold for exo-pectinase. The addition of phosphate to this integrated system improved the total concentration factor and purification fold of the activity to 1.73 and 2.14, respectively.

  16. Extraction of doxycycline hydrochloride using anhydrous alcohol and acetone binary aqueous two phase system%醇和小分子有机物二元双水相体系萃取盐酸多西环素

    Institute of Scientific and Technical Information of China (English)

    关卫省; 邓江华; 韩娟

    2012-01-01

    基于小分子醇双水相体系和小分子有机物双水相体系,建立了乙醇与丙酮和( NH4) 2SO4形成的二元双水相体系萃取盐酸多西环素的新方法.研究了(NH4)2SO4浓度、pH值、温度、乙醇与丙酮用量和盐酸多西环素浓度对盐酸多西环素分配行为的影响.结果表明,体系的(NH4)2SO4浓度为41%,pH值在4.5 ~5.0,温度25℃,且盐酸多西环素的质量浓度70 mg/L时,萃取率可达93.61%,分配系数可达83.081.%Based on the molecular alcohol aqueous two-phase system and the small molecular organic two-phase system,the new method of using anhydrous alcohol and small molecular organic (acetone) with ( NH4)2SO4 binary aqueous two phase system for extracting doxycycline hydrochloride was set up. The influence factors on partition behaviors of doxycycline hydrochloride were studied, including the concentration of (NH4)2SO4,anhydrous alcohol and acetone consumption,pH value,temperature and doxycycline hydrochloride. The results showed that when (NH4)2SO4 concentration of 41% ,pH value of 4.5~5.0, and the temperature of 25℃ ,mass concentration of doxycycline hydrochloride 70 mg/L,the extraction rate up to 93.61% and 83.081 .respectively.

  17. Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

    OpenAIRE

    Trindade, Inês P.; Diogo, Maria M.; Prazeres, Duarte M. F.; Marcos, João Carlos

    2005-01-01

    The current study explores the possibility of using a polyethyleneglycol(PEG)/ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for AT...

  18. [Bmim]Cl双水相体系对猪皮皮粉溶解性能的研究%The Dissolvability of Pigskin Hide Powder in the [Bmim] Cl Aqueous Two-phase System

    Institute of Scientific and Technical Information of China (English)

    邹永鹏; 刘森; 冯健; 华坚; 周华龙

    2012-01-01

    实验以溴代正丁烷和N-甲基咪唑为原料,丙酮为溶剂合成目标离子液体氯化1-丁基-3-甲基咪唑([Bmim]Cl).将合成的[Bmim]Cl、盐和去离子水混合形成离子液体双水相体系,并溶解猪皮皮粉.讨论不同种类的盐和不同质量分数的猪皮皮粉溶于猪皮皮粉溶于离子液体双水相体系的溶解情况.通过研究发现双水相体系中,盐为K2HPO4且浓度为65.5mg/mL时溶解猪皮胶原情况最好,平且当猪皮皮粉的质量分数为10%时,溶液已经达到饱和.用傅里叶红外光谱仪对回收的离子液体以及猪皮胶原再生膜进行红外分析,观察得到回收的离子液体的较好,猪皮皮粉溶解前后胶原二级结构未发生变化.%[Bmim]Cl was synthesized by n-butyl bromide and N-methylimidazole, with acetone as the solvent. [Bmim] Cl, salt and deionized water were mixed to form ionic liquids aqueous two-phase system which dissolved pigskin hide powder. The different kinds of salt and the different mass fraction pigskin hide powder were studied and characterized respectively, influencing the dissolvability of pigskin hide powder in ionic liquids aqueous two-phase system. It showed that salt in the aqueous two-phase system for K2HPO4 and for 62.5 mg/mL dissolved pigskin collagen when it was best. What' s more, when the dosage of pigskin hide powder was 11%, the solution had already saturated. FT1R spectra was used to observe the recycled ionic liquids and the regeneration of pigskin collagen. The recycled ionic liquid was well, and the , regeneration of pigskin collagen of the secondary structure of collagen didn' t changed.

  19. Extraction of Doxycycline Hydrochloride Using Alcohol and Ionic Liquid Binary Aqueous Two Phase System%醇与离子液体二元双水相体系萃取盐酸多西环素

    Institute of Scientific and Technical Information of China (English)

    关卫省; 黎文娟; 韩娟

    2012-01-01

    Based on the molecular alcohol aqueous two-phase system and the ionic liquid aqueous two-phase system, the new method of using n-propanol and hydrophilic ionic liquid(1-butyl-3-methylimidazolium tetrafluoroborate, [Bmim]BF4) with (NH4)2SO4 binary aqueous two phase system for the extraction of doxycycline hydrochloride was developed. The influence factors on partition behaviors of doxycycline hydrochloride were studied, including concentration of (NH4)2SO4, n-propanol con-sumption, pH value, concentration of ionic liquid and doxycycline hydrochloride. The results showed that when using pH value of 4. 0 - 5. 0, (NH4) 2SO4 concentration of 34% and doxycycline hydrochloride concentration between 25 -95 mg/L, the extraction rate and distribution coefficient of doxycycline hydrochloride will be up to 90. 26% -95. 71% and 62. 452 - 149. 401, respectively.%基于小分子醇双水相体系和离子液体双水相体系,建立了正丙醇与亲水性离子液体1-丁基-3-甲基咪唑四氟硼酸[ Bmim]BF4和(NH4 )2SO4形成的二元双水相体系萃取盐酸多西环素的新方法.考察了(NH4)2SO4含量、正丙醇用量、pH值、离子液体含量以及盐酸多西环素含量对盐酸多西环素分配行为的影响.结果表明:当醇和离子液体二元双水相体系的pH值在4.0~5.0范围内,(NH4)2SO4含量为34%,且盐酸多西环素的质量浓度在25 ~ 95 mg/L之间时,该体系对盐酸多西环素的萃取率可达90.26% ~95.71%,分配系数可达62.452 ~ 149.401.

  20. Phase diagrams for (liquid + liquid) and (liquid + solid) equilibrium of aqueous two-phase system containing {polyvinylpyrrolidone 3500 (PVP3500) + sodium sulfite (Na2SO3) + water} at different temperatures

    International Nuclear Information System (INIS)

    Highlights: • LLE of (polyvinylpyrrolidone + sodium sulfite + water) was studied. • The complete phase diagram for PVP3500 + Na2SO3 + H2O was determined at T = 298.15 K. • Binodal data were correlated with two empirical equations. • Tie-lines were fitted to several models including extended NRTL and modified NRTL. • The entropy is driving force for aqueous two-phase formation. - Abstract: The (liquid + liquid) equilibrium (LLE) for the {polyvinylpyrrolidone (PVP3500) + Na2SO3 + H2O} system has been determined experimentally at T = (298.15, 308.15 and 318.15) K. The (liquid + liquid + solid) equilibrium (LLSE) and complete phase diagram of this system were also obtained at T = 298.15 K. The effect of temperature on the binodal curves and the tie-lines for the investigated aqueous two-phase system (ATPS) have been studied. The Merchuk equation and an empirical equation that we proposed in our previous work were used for reproducing the experimental binodal results, and their three fitting parameters were obtained with the temperature dependence expressed in the linear form with (T − T0) K as a variable. Furthermore, the Othmer–Tobias and Bancroft, a temperature dependent Setschenow-type equation and osmotic virial model, the segment-based local composition models (i.e. the extended NRTL (E-NRTL) and modified NRTL (M-NRTL)) were used for the correlation of the (liquid + liquid) phase behavior of the studied system. Also, we estimated plait point, slope and the length of tie-lines at T = (298.15, 308.15 and 318.15) K

  1. Purification of Active Myrosinase from Plants by Aqueous Two-Phase Counter-Current Chromatography

    Science.gov (United States)

    Wade, Kristina L.; Ito, Yoichiro; Ramarathnam, Aarthi; Holtzclaw, W. David; Fahey, Jed W.

    2014-01-01

    Introduction Myrosinase (thioglucoside glucohydrolase; E.C. 3.2.1.147), is a plant enzyme of increasing interest and importance to the biomedical community. Myrosinase catalyses the formation of isothiocyanates such as sulforaphane (frombroccoli) and 4-(α-l-rhamnopyranosyloxy)benzyl isothiocyanate (from moringa), which are potent inducers of the cytoprotective phase-2 response in humans, by hydrolysis of their abundant glucosinolate (β-thioglucoside N-hydroxysulphate) precursors. Objective To develop an aqueous two-phase counter-current chromatography (CCC) system for the rapid, three-step purification of catalytically active myrosinase. Methods A high-concentration potassium phosphate and polyethylene glycol biphasic aqueous two-phase system (ATPS) is used with a newly developed CCC configuration that utilises spiral-wound, flat-twisted tubing (with an ovoid cross-section). Results Making the initial crude plant extract directly in the ATPS and injecting only the lower phase permitted highly selective partitioning of the myrosinase complex before a short chromatography on a spiral disk CCC. Optimum phase retention and separation of myrosinase from other plant proteins afforded a 60-fold purification. Conclusion Catalytically active myrosinase is purified from 3-day broccoli sprouts, 7-day daikon sprouts, mustard seeds and the leaves of field-grown moringa trees, in a CCC system that is predictably scalable. PMID:25130502

  2. 苦瓜种子蛋白的双水相提取及抑菌性研究%Extraction of Seed Protein from Momordica charantia by Aqueous Two-phase System and Its Antibacterial Effect

    Institute of Scientific and Technical Information of China (English)

    于群; 朱新产

    2012-01-01

    Through screening and optimizing some influential factors, such as the mass fraction of polyethylene glycol (PEG) / ammonium sulfate aqueous two - phase, partition coefficient and recovery rate, the best conditions for the extraction of seed protein from balsam pear (Momordica charantia) were obtained. The result revealed that: when the mass fraction of ammonium sulfate and PEG was 26% and 22% respectively, the partition coefficient was the lowest (0.089), the recovery rate was the highest (96% ), and the purified seed protein with molecular weight 35.6 kD and 12.3 kD was acquired from Momordica charantia by aqueous two - phase system. The antibacterial tests indicated that Momordica charantia seed protein had various antibacterial effects to bacterium and fungus, and the antibacterial effect of the purified protein was better than that of the crude protein.%筛选优化了聚乙二醇(PEG)/硫酸铵双水相的质量分数、分配系数、回收率等影响因素,得到了苦瓜种子蛋白的最佳萃取条件:在26%硫酸铵、22%聚乙二醇条件下,分配系数最小,达0.089,回收率为96%,得到分子量为35.6 kD和12.3kD的苦瓜纯化蛋白.抑菌试验表明,苦瓜种子蛋白对细茵、真菌均有不同程度的抑制作用,且纯化蛋白的抑菌性大于粗提蛋白.

  3. Synthesis of octyl-β-d-glucopyranoside catalyzed by Thai rosewood β-glucosidase-displaying Pichia pastoris in an aqueous/organic two-phase system.

    Science.gov (United States)

    Guo, DongHeng; Xu, YanShan; Kang, YaJun; Han, ShuangYan; Zheng, SuiPing

    2016-04-01

    We explored the ability of a Thai rosewood β-glucosidase-displaying P. pastoris whole-cell biocatalyst (Pp-DCBGL) system to synthesize alkyl β-d-glucosides. The primary investigation centered on the synthesis of octyl-β-d-glucopyranoside (octyl-glu, OG). OG could be synthesized through reverse hydrolysis reaction with very low efficiency. Then, OG was synthesized between BG and octanol by a transglycosylation reaction. In a 2-ml reaction system, OG was synthesized with a conversion rate of 51.1% in 3h when 5mg/ml BG was utilized as the glucosyl donor under optimized conditions. And, even after being reused four times, the Pp-DCBGL was relatively stable. Additionally, a 500-ml-scale reaction system was conducted in a 2-L stirred reactor with a conversion rate of 47.5% in 1.5h. Moreover, the conversion rate did not decrease after the whole-cell catalyst was reused two times. In conclusion, Pp-DCBGL has high reaction efficiency and operational stability, which is a powerful biocatalyst available for industrial synthesis. PMID:26920486

  4. Rationale for two phase polymer system microgravity separation experiments

    Science.gov (United States)

    Brooks, D. E.; Bamberger, S. B.; Harris, J. M.; Vanalstine, J.

    1984-01-01

    The two-phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) are mixed at concentrations above a few percent are discussed. They provide useful media for the partition and isolation of macromolecules and cell subpopulations. By manipulating their composition, separations based on a variety of molecular and surface properties are achieved, including membrane hydrophobic properties, cell surface charge, and membrane antigenicity. Work on the mechanism of cell partition shows there is a randomizing, nonthermal energy present which reduces separation resolution. This stochastic energy is probably associated with hydrodynamic interactions present during separation. Because such factors should be markedly reduced in microgravity, a series of shuttle experiments to indicate approaches to increasing the resolution of the procedure are planned.

  5. Direct recovery of cyclodextringlycosyltransferase from Bacillus cereus using aqueous two-phase flotation.

    Science.gov (United States)

    Lin, Yu Kiat; Show, Pau Loke; Yap, Yee Jiun; Tan, Chin Ping; Ng, Eng-Poh; Ariff, Arbakariya B; Mohamad Annuar, Mohamad Suffian B; Ling, Tau Chuan

    2015-12-01

    Purification of cyclodextrin glycosyl transferase (CGTase) from Bacillus cereus using polyethylene glycol (PEG)-potassium phosphates aqueous two-phase flotation (ATPF) system was studied in this paper. The effects of varying PEG molecular weight, tie-line length (TLL) value, volume ratio (VR), pH value, crude concentration and gas nitrogen flotation time were investigated. The optimal condition for purification of CGTase was attained at 18.0% (w/w) PEG 8000, 7.0% (w/w) potassium phosphates, VR of 3.0, 20% (w/w) crude load at pH 7, and 80 min nitrogen flotation time at a flow rate of 5 L/min. With this optimal condition, purification factor (PFT) of 21.8 and a yield (YT) of 97.1% were attained. CGTase was successfully purified in a single downstream processing step using the ATPF. PMID:26111602

  6. Partitioning behavior and structural characterization of papain in ionic liquid aqueous two-phase system%木瓜蛋白酶在离子液体双水相中的分配行为

    Institute of Scientific and Technical Information of China (English)

    王伟涛; 蒋志国; 张海德; 彭健; 许英豪; 董安华; 杨雪芳; 蒋欣欣

    2015-01-01

    Papain was extracted by ionic liquid aqueous two-phase system. Firstly,the influence of concentration, pH, and temperature of ionic liquid on the activity of papain was investigated. Secondly, the effects of different ionic liquid aqueous two-phase systems, alkyl chain lengths and concentrations of the ionic liquid, dosage of papain, pH, temperature on the partitioning behavior of papain were discussed. [C4mim]Cl and [C4mim]Br systems were better than [C4mim]BF4 system in extraction of papain, and it was disadvantageous to extract papain at a high temperature (60℃or higher). Activity recovery of enzyme reached 95.16%and purification factor reached 1.5 under the optimum conditions:[C4mim]Cl 0.25 g·ml−1, K2HPO4 0.35 g·ml−1, pH 8.0, enzyme addition 2.0 mg·ml−1, 30℃. The result laid the experimental basis for further scale-up research and commercial production.%采用离子液体双水相提取木瓜蛋白酶。首先考察不同浓度、pH、温度的离子液体对木瓜蛋白酶活性的影响,其次考察不同离子液体双水相体系、离子液体侧烷基链长度及浓度、酶添加量、pH、温度对木瓜蛋白酶分配行为的影响。结果表明:[C4mim]Cl 和[C4mim]Br 体系萃取木瓜蛋白酶的效果比[C4mim]BF4体系好;高温(≥60℃)对离子液体双水相体系萃取木瓜蛋白酶不利。离子液体双水相萃取木瓜蛋白酶的最佳工艺条件:0.25 g·ml−1的[C4mim]Cl,0.35 g·ml−1的K2HPO4,pH 8.0,酶添加量2.0 mg·ml−1,30℃。此条件下木瓜蛋白酶的酶活性回收率达到95.16%,纯化因子达到1.5。为今后进一步研究该体系的放大实验或规模化生产奠定了基础。

  7. Metallic and semiconducting carbon nanotubes separation using an aqueous two-phase separation technique: a review

    Science.gov (United States)

    Tang, Malcolm S. Y.; Ng, Eng-Poh; Juan, Joon Ching; Ooi, Chien Wei; Ling, Tau Chuan; Woon, Kai Lin; Loke Show, Pau

    2016-08-01

    It is known that carbon nanotubes show desirable physical and chemical properties with a wide array of potential applications. Nonetheless, their potential has been hampered by the difficulties in acquiring high purity, chiral-specific tubes. Considerable advancement has been made in terms of the purification of carbon nanotubes, for instance chemical oxidation, physical separation, and myriad combinations of physical and chemical methods. The aqueous two-phase separation technique has recently been demonstrated to be able to sort carbon nanotubes based on their chirality. The technique requires low cost polymers and salt, and is able to sort the tubes based on their diameter as well as metallicity. In this review, we aim to provide a review that could stimulate innovative thought on the progress of a carbon nanotubes sorting method using the aqueous two-phase separation method, and present possible future work and an outlook that could enhance the methodology.

  8. Scaling of Two-Phase Systems Across Gravity Levels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is a defined need for long term earth based testing for the development and deployment of two-phase flow systems in reduced-gravity, including lunar gravity,...

  9. Purification and characterization of polyphenol oxidase from waste potato peel by aqueous two-phase extraction.

    Science.gov (United States)

    Niphadkar, Sonali S; Vetal, Mangesh D; Rathod, Virendra K

    2015-01-01

    Potato peel from food industrial waste is a good source of polyphenol oxidase (PPO). This work illustrates the application of an aqueous two-phase system (ATPS) for the extraction and purification of PPO from potato peel. ATPS was composed of polyethylene glycol (PEG) and potassium phosphate buffer. Effect of different process parameters, namely, PEG, potassium phosphate buffer, NaCl concentration, and pH of the system, on partition coefficient, purification factor, and yield of PPO enzyme were evaluated. Response surface methodology (RSM) was utilized as a statistical tool for the optimization of ATPS. Optimized experimental conditions were found to be PEG1500 17.62% (w/w), potassium phosphate buffer 15.11% (w/w), and NaCl 2.08 mM at pH 7. At optimized condition, maximum partition coefficient, purification factor, and yield were found to be 3.7, 4.5, and 77.8%, respectively. After partial purification of PPO from ATPS, further purification was done by gel chromatography where its purity was increased up to 12.6-fold. The purified PPO enzyme was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), followed by Km value 3.3 mM, and Vmax value 3333 U/mL, and enzyme stable ranges for temperature and pH of PPO were determined. These results revealed that ATPS would be an attractive option for obtaining purified PPO from waste potato peel. PMID:25036474

  10. Two-phase flow heat transfer in nuclear reactor systems

    International Nuclear Information System (INIS)

    occurring in at least two different spatial scales. Uncertainty in modelling of bubble departure diameter at boiling was studied by M. Matkovic and B. Koncar. In this article the propagation of input uncertainties for the simplified model of bubble departure size is evaluated. A methodology for estimating the prediction capability of a given correlation is provided taking into account its range of applicability. Aqueous nanofluids have a great potential for cooling applications, hence they have been studied in the article of P.N. Alekseev et al. as a possible coolant in pressurized water reactor (PWR). The theoretical study presents how a stable formation of nanoparticles in water solution can be established. Formation of fractal nanoparticles with a higher thermal conductivity than water can enhance the heat transfer of water used as a coolant in PWR. Apart from solid particles, also alternative formation of gaseous nanoparticles in density fluctuations of water is discussed. The article of R. Rzehak and E. Krepper provides a comprehensive overview of the state-of-the-art in the field of CFD modelling of subcooled flow boiling. The efficient predictive capability of current models requires calibration of model parameters over a wide range of measured data and operating conditions.The results presented in the article confirmed the great potential of the existing modelling approach for the 3D simulation of subcooled flow boiling in industrial applications but also highlight the need for specific model improvements to achieve highly accurate predictions. Two articles deal with one-dimensional analyses of two phase flows. In the article of O.Costa et al., a rapid depressurization in vertical heated pipe is simulated with the in-house 1D computer code WAHA, which was developed specifically for simulations of two-phase water hammer phenomena. The WAHA results were confronted with the simulations of the well-known system code RELAP5 on the same experimental data. The thermal

  11. Microgravity fluid management in two-phase thermal systems

    Science.gov (United States)

    Parish, Richard C.

    1987-01-01

    Initial studies have indicated that in comparison to an all liquid single phase system, a two-phase liquid/vapor thermal control system requires significantly lower pumping power, demonstrates more isothermal control characteristics, and allows greater operational flexibility in heat load placement. As a function of JSC's Work Package responsibility for thermal management of space station equipment external to the pressurized modules, prototype development programs were initiated on the Two-Phase Thermal Bus System (TBS) and the Space Erectable Radiator System (SERS). JSC currently has several programs underway to enhance the understanding of two-phase fluid flow characteristics. The objective of one of these programs (sponsored by the Microgravity Science and Applications Division at NASA-Headquarters) is to design, fabricate, and fly a two-phase flow regime mapping experiment in the Shuttle vehicle mid-deck. Another program, sponsored by OAST, involves the testing of a two-phase thermal transport loop aboard the KC-135 reduced gravity aircraft to identify system implications of pressure drop variation as a function of the flow quality and flow regime present in a representative thermal system.

  12. 离子液体双水相萃取山楂黄酮和多糖的研究%Study on the Extraction of Hawthorn Flavonoids and Polysaccharide in Ionic Liquid Aqueous Two-Phase System

    Institute of Scientific and Technical Information of China (English)

    巩育军; 牛盛童; 黄学锋; 王键

    2014-01-01

    Partition behaviors of hawthorn flavonoids and polysaccharide in ionic liquid aqueous two-phase system(ILATPS)were studied by spectrophotometry.Effects of concentration of ionic liquid and ammonium sulfate,dosage of hawthorn and ultrasonic time on the extraction rate of hawthorn flavonoids and polysaccharide were investigated.The optimal extraction conditions were as follows:concentration of ionic liquid [Bmim]BF4 was 0.26~0.30 g·mL-1,concentration of ammonium sulfate was 0.08~0.10 g·mL-1,dosage of hawthorn was 0.14~0.17 g,ultrasonic time was 15~20 min.Under these conditions,extraction rate of hawthorn fla-vonoids was 86.4%~96.0% in the up phase,and extraction rate of polysaccharide was 75.2%~76.0% in the down phase.%采用分光光度法研究了山楂黄酮和多糖在[Bmim]BF4/(NH4)2 SO4双水相体系的分配行为,探讨了离子液体浓度、(NH4)2 SO4浓度、山楂用量和超声时间等因素对山楂黄酮和多糖萃取率的影响。确定最佳萃取条件为:离子液体[Bmim]BF4浓度0.26~0.30 g·mL-1,(NH4)2 SO4浓度0.08~0.10 g·mL-1,山楂用量0.14~0.17 g,超声时间15~20 min,在此优化条件下,双水相上相中黄酮的萃取率为86.4%~96.0%、下相中多糖的萃取率为75.2%~76.0%。

  13. 双水相萃取丽江山慈菇中的秋水仙碱%Extraction the Colchicine of Iphigenia indica in Aqueous Two-phase System

    Institute of Scientific and Technical Information of China (English)

    石瑶; 杨亚玲; 李晚谊; 刘谋盛

    2012-01-01

    建立了由聚乙二醇( PEG6000)与(NH4)2SO4形成的双水相体系萃取丽江山慈菇中秋水仙碱的新方法.考察了PEG分子量、PEG的浓度、(NH4)2SO4的浓度和pH值对双水相成相及秋水仙碱萃取率的影响,并结合HPLC对萃取相进行检测.结果表明:PEG6000质量分数为8%,(NH4)2SO4质量分数为20%,pH为7.0时,双水相体系对丽江山慈菇粗提液中秋水仙碱萃取率达82.09%,富集倍数为6.84倍.此方法可用于丽江山慈菇中秋水仙碱的初步分离富集,且操作简单,绿色无污染.%A new method to extract the colchicine of Iphigenia indica in aqueous two-phase system(ATPS) formed by macromolecular compound PEG6000 and (NH4 )2SO4 was investigated. The effect of the molecular weight of PEG, the concentration of PEG, the concentration of (NH4) 2SO4 and pH on phase behavior of the ATPS and extraction efficiencies of colchicines was investigated systematically. Determination the content of colchincine in the extraction phase combined with HPLC. The results showed that the best ATPS was composed of 8% PEG6000 and 20% (NH4)2SO4 ,pH 7.0. The extraction efficiency of colchicine of crude extract could reach to 82. 09% ,fold enrichment reach to 6. 84. This method could be used to initial separate and enrichment the colchicine of Iphigenia indica, simple operation and friendly to the environment.

  14. Extraction of spirulina platensis polysaccharide by ethanol/(NH4)2SO4 aqueous two-phase system%乙醇/硫酸铵双水相体系萃取螺旋藻多糖的研究

    Institute of Scientific and Technical Information of China (English)

    刘杨; 冯元琦; 陈美欣; 吴景淳; 黄海根

    2012-01-01

    Extraction of spirulina platensis polysaccharide by ethanol/( NH4 ) 2SO4 aqueous two-phase system(ATPS)was investigated. To remove and recycle the proteins, salting-out precipitation protein was carried out after spirulina platensis cells disruption. Spirulina platensis polysaccharide was extracted by traditional hot water diffusion and the polysaccharide dissolution rate reached 38.44 ± 1. 12mg/g spirulina platensis powder. Spirulina platensis polysaccharide was purified deeply by ethanol/ (NH4)2SO4 ATPS. The yield and enrichment factor of the polysaccharide were 84. 5±1. 45% and 6. 2 respectively,on the condition that the tie line length, volume ratio and pH of ATPS were 42. 9,1. 05 and 7. 0, respectively. The results indicated that spirulina platensis polysaccharide would be purified by a simple, efficient and low cost extraction technology using inexpensive ethanol/ (NH4)2SO4 ATPS.%考察了低分子有机溶剂与无机盐-乙醇/硫酸铵双水相体系萃取螺旋藻多糖的可行性及影响因素.研究结果表明:为除去并有效回收螺旋藻细胞中的蛋白质成分,在藻细胞破碎后进行盐析沉淀蛋白质,再采用传统的热水浸提法,可得到螺旋藻多糖的溶出率为38.44±1.12mg/g干燥粉;通过乙醇/硫酸铵双水相体系的萃取分配,在w(乙醇)=19%,w(硫酸铵)=27.5%(即双水相体系系线长度TLL =42.9),体系相比VR=1.05,pH=7.0时,螺旋藻多糖的收率可达84.5±1.45%,富集因子可达6.2.该研究结果表明廉价的乙醇/硫酸铵双水相萃取螺旋藻多糖将有望开发成为一条简洁、高效、低成本的螺旋藻多糖分离提取工艺.

  15. Controlling two-phase flow in microfluidic systems using electrowetting

    NARCIS (Netherlands)

    Gu, Hao

    2011-01-01

    Electrowetting (EW)-based digital microfluidic systems (DMF) and droplet-based two-phase flow microfluidic systems (TPF) with closed channels are the most widely used microfluidic platforms. In general, these two approaches have been considered independently. However, integrating the two technologie

  16. THERMAL PERFORMANCE OF A TWO PHASE CLOSED THERMOSYPHON USING AQUEOUS SOLUTION

    Directory of Open Access Journals (Sweden)

    M. Karthikeyan

    2010-05-01

    Full Text Available The thermal performance of an inclined two phase closed thermosyphon with different working fluid has been investigated experimentally in this paper. Distilled water and an aqueous solution that has a positive gradient of surface tension with temperature are used as the working fluid. A copper thermosyphon with a length of 1000 mm long, an inner diameter of 17 mm and an outer diameter of 19 mm was mployed. Each thermosyphon was charged with 60% of the working fluid and was tested with an evaporator length of 400 mm and condenser length of 450 mm. The thermosyphon was tested for various inclinations of 45○, 60○ and 90○ to the horizontal. Flow rate of 0.08Kg/min, 0.1 Kg/min and 0.12 Kg/min and heat input of 40 W, 60 W and 80 W were taken as input parameters. The thermal performance of aqueous solution charged two phase closed thermosyphon was out performed the distilled water in both heat transfer and temperature distribution.

  17. A pumped two-phase cooling system for spacecraft

    Science.gov (United States)

    Ollendorf, S.; Costello, F. A.

    1983-01-01

    A pumped, two-phase heat-transport system is being developed for possible use for temperature control of scientific instruments on future NASA missions. As compared to a single-phase system, this two-phase system can maintain tighter temperature control with less pumping power. A laboratory model of the system has been built and tested. The measured heat transfer coefficients were approximately the same as in heat pipes, 220 Btu/hr-sq ft-F, as compared to 25 Btu/hr-sq ft-F for single-phase liquid flow. Heat shearing between experiments has been demonstrated wherein vapor generated in the cold plate of an active experiment was condensed in a cold, unheated experiment. System stability has been observed. However, additional development is needed. The use of non-azeotropic mixtures of coolants appears especially promising as a simple way to determine exit quality and thus control the flow rates to prevent dryout.

  18. Controlling two-phase flow in microfluidic systems using electrowetting

    OpenAIRE

    Gu, Hao

    2011-01-01

    Electrowetting (EW)-based digital microfluidic systems (DMF) and droplet-based two-phase flow microfluidic systems (TPF) with closed channels are the most widely used microfluidic platforms. In general, these two approaches have been considered independently. However, integrating the two technologies into one allows to combine the advantages of both worlds: (i) high throughput (from TPF) and (ii) precise control over each individual drop (from EW). Thus the aim of this thesis was to investiga...

  19. Designing piping systems for two-phase flow

    International Nuclear Information System (INIS)

    A wide range of industrial systems, such as thermosiphon reboilers and chemical reactors, involve two-phase gas-liquid flow in conduits. Design of these systems requires information about the flow regime, pressure drop, slug velocity and length, and heat transfer coefficient. An understanding of two-phase flow is critical for the reliable and cost-effective design of such systems. The successful design of a pipeline in two-phase flow, for example, is a two-step process. The first step is the determination of the flow regime. If an undesirable flow regime, such as slug flow, is not anticipated and adequately designed for, the resulting flow pattern can upset a tower control system or cause mechanical failures of piping components. The second step is the calculation of flow parameters such as pressure drop and density to size lines and equipment. Since the mechanism of fluid flow (and heat transfer) depends on the flow pattern, separate flow models are required for different flow patterns

  20. Mg2+-Dependent Control of the Spatial Arrangement of Rhodococcus erythropolis PR4 Cells in Aqueous-Alkane Two Phase Culture Containing n-Dodecane

    Science.gov (United States)

    Takihara, Hayato; Akase, Yumiko; Sunairi, Michio; Iwabuchi, Noriyuki

    2016-01-01

    We recently reported that a close relationship exists between alkane carbon-chain length, cell growth, and translocation frequency in Rhodococcus. In the present study, we examined the regulation of the spatial arrangement of cells in aqueous-alkane two phase cultures. An analysis of the effects of minerals on cell localization revealed that changes in the concentration of MgSO4 in two phase cultures containing n-dodecane (C12) altered cell localization from translocation to adhesion and vice versa. Our results indicate that the spatial arrangement of cells in two phase culture systems is controlled through the regulation of MgSO4 concentrations. PMID:27180641

  1. Two-phase flow instability in a parallel multichannel system

    Institute of Scientific and Technical Information of China (English)

    HOU Suxia

    2009-01-01

    The two-phase flow instabilities observed in through parallel multichannel can be classified into three types, of which only one is intrinsic to parallel multichannel systems. The intrinsic instabilities observed in parallel multichannel system have been studied experimentally. The stable boundary of the flow in such a parallel-channel system are sought, and the nature of inlet flow oscillation in the unstable region has been examined experimentally under various conditions of inlet velocity, heat flux, liquid temperature, cross section of channel and entrance throttling. The results show that parallel multichannel system possess a characteristic oscillation that is quite independent of the magnitude and duration of the initial disturbance, and the stable boundary is influenced by the characteristic frequency of the system as well as by the exit quality when this is low, and upon raising the exit quality and reducing the characteristic frequency, the system increases its instability, and entrance throttling effectively contributes to stabilization of the system.

  2. Dynamic modelling for two-phase flow systems

    International Nuclear Information System (INIS)

    Several models for two-phase flow have been studied, developing a thermal-hydraulic analysis code with one of these models. The program calculates, for one-dimensional cases with variable flow area, the transient behaviour of system process variables, when the boundary conditions (heat flux, flow rate, enthalpy and pressure) are functions of time. The modular structure of the code, eases the program growth. In fact, the present work is the basis for a general purpose accident and transient analysis code in nuclear reactors. Code verification has been made against RETRAN-02 results. Satisfactory results have been achieved with the present version of the code. (Author)

  3. Synthesis of 2-Phenylethanol by Bioconversion in Aqueous-Organic Solvent Two-phase System%水-聚丙二醇两相体系中生物转化法合成2-苯乙醇

    Institute of Scientific and Technical Information of China (English)

    陈虹; 陈蔚青; 张建芬

    2011-01-01

    研究了水-聚丙二醇两相体系中生物转化法合成2-苯乙醇的工艺条件,考察了聚丙二醇分子量、加量、转化振荡转速和底物浓度对2-苯乙醇合成的影响,确定了最佳的转化条件.结果表明,摇瓶中两相体系转化合成2-苯乙醇的最佳条件为:聚丙二醇分子量1500,加量为培养基体积的1/2,振荡转速250 r/min,底物浓度13g/L.在5L发酵罐中采用水-聚丙二醇两相体系生物转化法合成2-苯乙醇,浓度达6.87 g/L,产率为0.38 g/(L·h),较常规水相转化分别提高了42.2%和58.3%.%Production of 2-phenylethanol by byconversion was performed in a two-phase system composed of water and polypropylene glycol. The molecular weight and adding volume of polypropylene glycol, shaking speed for cultivation and concentration of L-phenylalanine were investigated to improve the productivity of 2-phenylethanol. The bioconversion process was carried out in a 5 L fermentor. The results indicated that the optimal conditions for 2-phenylethanol production in two-phase system were as follows: polypropylene glycol molecular weight was 1500, adding volume half of the volume of medium, shaking speed 250 r/min, and concentration of substrate 13 g/L. In the 5 L fermentor with polypropylene glycol by ISPR, the concentration and productivity of 2-phenylethanol were 6.87 g/L and 0.38 g/(Lh) respectively, compared with no polypropylene glycol extraction, which were improved by 42.2% and 58.3%.

  4. AQUEOUS TWO-PHASE GAS FLOATATION SPECTROPHOTOMETRIC DETERMINATION OF TRACE TETRACYCLINE IN ENVIRONMENTAL WATER SAMPLE

    Institute of Scientific and Technical Information of China (English)

    HOU Yanmin; YAN Yongsheng; LI Chunxiang; ZHAO Xiaojun; WANG Liang

    2008-01-01

    A green method for separating and enriching trace tetracycline (TC) in environment water by Aqueous Two-phase Gas Fioatation Spectrophotometry has been proposed, the principium was discussed.In this paper, the hydrophobic complex composed of Mg(Ⅱ) and TC was floated into organic phase under the optimal conditions: pH=10, the floatatlon equipment is home-made, n-propyl alcohol as the organic solvent, sodium chloride as the separating phase reagent.The data were obtained by spectrophotometry after floatatlon; The linear regression ,equation is A=2.33×105 C(mol/L)+0.2179, linear range is from 3.77×107mol/L to 6.32×105mol/L, respectively, with the correlation coefficient (r) better than 0.9997, relative recoveries is 99.7% to 100.3%, limit of detection was 4.29×10-8mol/L, The method can be applied to analyse the trace TC in water sample, the result is better.

  5. A TWO-PHASE APPROACH TO FUZZY SYSTEM IDENTIFICATION

    Institute of Scientific and Technical Information of China (English)

    Ta-Wei HUNG; Shu-Cherng FANG; Henry L.W.NUTTLE

    2003-01-01

    A two-phase approach to fuzzy system identification is proposed. The first phase produces a baseline design to identify a prototype fuzzy system for a target system from a coIlection of input-output data pairs. It uses two easily implemented clustering techniques: the subtractive clustering method and the fuzzy c-means (FCM) clustering algorithm. The second phase (fine tuning)is executed to adjust the parameters identified in the baseline design. This phase uses the steepest descent and recursive least-squares estimation methods. The proposed approach is validated by applying it to both a function approximation type of problem and a classification type of problem. An analysis of the learning behavior of the proposed approach for the two test problems is conducted for further confirmation.

  6. Aqueous two-phase flotation for primary recovery of bacteriocin-like inhibitory substance (BLIS) from Pediococcus acidilactici Kp10.

    Science.gov (United States)

    Md Sidek, Nurul Lyana; Tan, Joo Shun; Abbasiliasi, Sahar; Wong, Fadzlie Wong Faizal; Mustafa, Shuhaimi; Ariff, Arbakariya B

    2016-08-01

    An aqueous two-phase flotation (ATPF) system based on polyethylene glycol (PEG) and sodium citrate (NaNO3C6H5O7·2H2O) was considered for primary recovery of bacteriocin-like inhibitory substance (BLIS) from Pediococcus acidilactici Kp10. The effects of ATPF parameters namely phase composition, tie-line length (TLL), volume ratio between the two phases (VR), amount of crude load (CL), pH, nitrogen gas flow rate (FR) and flotation time (FT) on the performance of recovery were evaluated. BLIS was mainly concentrated into the upper PEG-rich phase in all systems tested so far. The optimum conditions for BLIS purification, which composed of PEG 8000/sodium citrate, were: TLL of 42.6, VR of 0.4, CL of 22% (w/w), pH 7, average FT of 30min and FR of 20mL/min. BLIS was partially purified up to 5.9-fold with a separation efficiency of 99% under this optimal conditions. A maximum yield of BLIS activity of about 70.3% was recovered in the PEG phase. The BLIS from the top phase was successfully recovered with a single band in SDS-gel with molecular weight of about 10-15kDa. ATPF was found to be an effective technique for the recovery of BLIS from the fermentation broth of P. acidilactici Kp10. PMID:27262666

  7. Lithium isotope separation factors of some two-phase equilibrium systems

    International Nuclear Information System (INIS)

    Isotope separation factors of seventeen two-phase equilibrium systems for lithium isotope enrichment have been determined. In all cases, lithium amalgam was used as one of the lithium-containing phases and was equilibrated with an aqueous or organic phase containing a lithium compound. In all systems examined, isotopic exchange was found to be extremely rapid, and 6Li was concentrated in the amalgam phase. The isotopic separation factor for the LiOH(aqueous) vs Li(amalgam) system has been studied as a function of temperature from -2 to 80 degreeC. The values obtained have been compared with the ''electrolysis'' and exchange separation factors given in the literature. The two-phase systems, LiCl(ethylenediamine) vs Li(amalgam) and LiCl(propylenediamine) vs Li(amalgam), have been studied, and the isotopic separation factors have been determined as functions of the temperature. The factors for the two systems have been found to be substantially the same (within limits of the errors involved) over the temperature range studied (0 to 100 degreeC) as those for the aqueous system. The isotopic separation factors for the seventeen systems have been tabulated, and correlations have been drawn that show the salt and solvent effects upon the values obtained

  8. Quantification of the antifungal lipopeptide iturin A by high performance liquid chromatography coupled with aqueous two-phase extraction.

    Science.gov (United States)

    Yuan, Jun; Raza, Waseem; Huang, Qiwei; Shen, Qirong

    2011-09-15

    Iturin A, a powerful antifungal surfactant, is a kind of bacterial lipopeptide produced by Bacillus strains. This study addresses the use of an aqueous two-phase system (ATPS) using ethanol/ammonium sulfate to extract iturin A from Bacillus amyloliquefaciens NJN-6 fermentation broth and the quantification of iturin A by HPLC. Baseline separation of iturin A homologues was performed using an RP-C(18) column with a mixture of water and acetonitrile. The results showed that the correlation coefficient between integral area and concentration was 0.9961 within the range of 20-140 mg/l. The RSD of the retention time and the peak area were 1.29% and 1.45%, respectively. The effects of some operating parameters in ATPS, e.g., pH, temperature and centrifugation time, were also studied. This method can be successfully used for the rapid quantification of iturin A. PMID:21872538

  9. Transient thermohydraulic modeling of two-phase fluid systems

    International Nuclear Information System (INIS)

    This paper presents a transient thermohydraulic modeling, initially developed for a capillary pumped loop in gravitational applications, but also possibly suitable for all kinds of two-phase fluid systems. Using finite volumes method, it is based on Navier-Stokes equations for transcribing fluid mechanical aspects. The main feature of this 1D-model is based on a network representation by analogy with electrical. This paper also proposes a parametric study of a counterflow condenser following the sensitivity to inlet mass flow rate and cold source temperature. The comparison between modeling results and experimental data highlights a good numerical evaluation of temperatures. Furthermore, the model is able to represent a pretty good dynamic evolution of hydraulic variables.

  10. Progress on the study of mechanism and partition behavior of papain in affinity aqueous two-phase systems%木瓜蛋白酶在亲和双水相系统中的分配行为及机制研究进展

    Institute of Scientific and Technical Information of China (English)

    张海德; 王伟涛; 蒋欣欣

    2013-01-01

    The separation methods of papain such as ultrafiltration, salt deposition, solvent extraction, affinity chromatography, aqueous two - phase extraction, affinity aqueous two-phase extraction and so on are evaluated. High purity papain can be expected to obtain by metal chelating affinity aqueous two-phase system (ATPS) technology, but the mechanism and partition behavior of papain in this system are not clear. It is important to study the interactions between papain and different metal ion affinity phase-separating agent, the adsorption kinetics model of papain in ATPS and the physical structure characterization and molecular simulation of the enzyme affinity adsorbent. Metal chelating affinity ATPS technology based on papain separation, will vigorously promote the development of papain industrialization and it has stimulative effect on the development of aqueous two-phase extraction technology.%  本文查阅相关文献,对木瓜蛋白酶传统提取方法(超滤法、盐析法、有机溶剂法、亲和层析法)及一些新兴的提取方法如双水相萃取法、亲和双水相法作了简要综述。利用金属螯合亲和双水相分配系统,能有效获得高纯度木瓜蛋白酶,但木瓜蛋白酶与亲和成相剂的相互作用及其分配行为与机制尚不清楚。研究木瓜蛋白酶与不同金属离子亲和成相剂之间的相互作用和吸附动力学模型;对酶的亲和结合物进行物理表征和分子模拟。阐明木瓜蛋白酶与不同金属离子亲和成相剂之间的亲和作用原理。将双水相萃取技术和亲和分配技术相融合,提出基于木瓜蛋白酶的金属螯合亲和双水相分配技术,该技术有望大力推动木瓜蛋白酶工业化高效制备的发展。

  11. Preparation and characterization of two-phase melt systems of lidocaine.

    Science.gov (United States)

    Kang, L; Jun, H W; Mani, N

    2001-07-01

    The melting point of lidocaine was significantly lowered when mixed with thymol and/or aqueous ethanol. Mixtures of lidocaine and thymol at ratios within the range of 30:70-70:30 (w:w) became homogeneous oils at 25 degrees C. In a pH 9.2 carbonate buffer containing 25% ethanol, lidocaine (5%, w:w) also liquefied at 25 degrees C. The studies led to the development of novel two-phase melt systems of lidocaine (TMS) which consisted of a highly concentrated oil phase of lidocaine and an alcoholic aqueous phase. A compositional phase diagram showed that in aqueous dispersions of lidocaine, concurrent use of thymol and ethanol depressed the melting point of lidocaine more effectively than when they were used individually. Both thymol and aqueous ethanol were necessary as melting point depressing agents to achieve the highest possible lidocaine concentration of 87% (w:w) in the oil phase of a TMS at 25 degrees C. Containing an internal oil phase and an external aqueous phase at ambient temperature, such a TMS can be readily formulated into topical O/W cream after addition of proper surfactants and thickening agents. In an anesthetic activity test using mouse tail-flick model, a 5% lidocaine cream prepared was highly effective as shown by the prolonged latency time of the mice to a heat stimulus as compared with a placebo (P<0.05). PMID:11404030

  12. Single step aqueous two-phase extraction for downstream processing of C-phycocyanin from Spirulina platensis

    OpenAIRE

    Chethana, S.; Nayak, Chetan A.; M.C. Madhusudhan; Raghavarao, K. S. M. S.

    2014-01-01

    C-phycocyanin, a natural food colorant, is gaining importance worldwide due to its several medical and pharmaceutical applications. In the present study, aqueous two-phase extraction was shown to be an attractive alternative for the downstream processing of C-phycocyanin from Spirulina platensis. By employing differential partitioning, C-phycocyanin selectively partitioned to the polymer rich (top) phase in concentrated form and contaminant proteins to the salt rich (bottom) phase. This resul...

  13. Distribution coefficient correlations for nitric acid, U(VI) and Pu(IV) in two-phase system with aqueous nitric acid and 30% tri-n-butylphosphate solutions

    International Nuclear Information System (INIS)

    Distribution coefficient correlations are obtained for nitric acid, U(VI) and Pu(IV) extracted with 30% tri-n-butylphosphate (TBP) diluted by n-dodecane from aqueous nitric acid solutions. The correlation functions are described as a mathematical model that takes account of activity coefficients expressed by a function of ionic strength. The correlations include the temperature effect on distribution coefficient, and works successfully for the experimental distribution coefficients in the literature within the temperature range of 10 to 70degC. The concentrations of nitric acid, U(VI) and Pu(IV) in a multi-stage extraction experiment previously reported have been simulated well with the new distribution correlations at room and elevated temperatures. (author)

  14. Single step aqueous two-phase extraction for downstream processing of C-phycocyanin from Spirulina platensis.

    Science.gov (United States)

    Chethana, S; Nayak, Chetan A; Madhusudhan, M C; Raghavarao, K S M S

    2015-04-01

    C-phycocyanin, a natural food colorant, is gaining importance worldwide due to its several medical and pharmaceutical applications. In the present study, aqueous two-phase extraction was shown to be an attractive alternative for the downstream processing of C-phycocyanin from Spirulina platensis. By employing differential partitioning, C-phycocyanin selectively partitioned to the polymer rich (top) phase in concentrated form and contaminant proteins to the salt rich (bottom) phase. This resulted in an increase in the product purity (without losing much of the yield) in a single step without the need of multiple processing steps. Effect of process parameters such as molecular weight, tie line length, phase volume ratio, concentration of phase components on the partitioning behavior of C-phycocyanin was studied. The results were explained based on relative free volume of the phase systems. C-phycocyanin with a purity of 4.32 and yield of about 79 % was obtained at the standardized conditions. PMID:25829627

  15. Isolation of a lipase-producing Trichosporon spp and enzyme extraction by two-phase aqueous system Isolamento de Trichosporon spp produtor de lipase e extração enzimática pelo sistema bifásico aquoso

    OpenAIRE

    Juliana A. Santos; Marcel C.O. Amaral; Thiago A.S. Araújo; Késsia G.C. Fernandes; Adilson C. Chaves; Morais, Márcia M. C.

    2007-01-01

    A lipase-producing yeast strain isolated from crude cheese and identified as Trichosporon spp produced 7.3 U/mL (59.3 U/µg) after 72h of cultivation. Lipase showed optimum activity at pH 7.0-8.0 and 45-50ºC. Extraction by the two-phase aqueous system (PEG-phosphate salts) showed an elevated recuperation (99.8%) of enzymatic activity in the PEG phase.Uma levedura produtora de lipase isolada de queijo coalho e identificada como Trichosporon spp produziu 7,3 U/mL (59,3 U/µg) após 72h de cultivo....

  16. Two phase instabilities system analysis with application on Clotaire experiments

    Energy Technology Data Exchange (ETDEWEB)

    Pascal Monier; Jacques Belleudy; Georges Brochier [PRINCIPIA R.D., Z.I. Athelia I, 13705 La Ciotat Cedex (France); Valerie Saldo; Jean-Marie Gouirand; Pierre Gubernatis [CEA Cadarache, 13108 St Paul Lez Durance, Cedex (France)

    2005-07-01

    Full text of publication follows: Natural-circulation cooled Boiling Water Reactors are susceptible to undergo thermal hydraulics instabilities. The so-called Type-II instabilities due to frictional pressure losses in the core may be observed typically at nominal pressure and relatively high power in BWRs. In the framework of the NACUSP (Natural Circulation and Stability Performance) Project, a test section simulating the riser at the exit of an ESBWR core (European Simplified Boiling Water Reactor) has been set up in the CLOTAIRE facility in CEA, Center of Cadarache. Test campaigns have been conducted with stationary tests demonstrating the correct scaling of the loop with R124a as coolant fluid and with unstable tests identifying the instability thresholds. The CEDRIC thermal hydraulics code was developed with TECHNICATOME in order to simulate one or two phase flow in compact on-board PWR used for marine propulsion. A generic version of this tool, CEDRIC MultiFluides has been used for modeling transient two phase flow until stability limit with large amplitude flow oscillations such as observed during the CLOTAIRE tests. This 1D unsteady model is based on a 3-equations model together with a phase velocities difference closure law in the frame of a Drift Flux Model. The main purpose of this paper is to present the experimental results of the CLOTAIRE tests together with the validation calculations. (authors)

  17. Two-phase melt systems of ibuprofen for enhanced membrane permeation.

    Science.gov (United States)

    Kang, Lisheng; Park, M O; Jun, H W

    2004-11-01

    A novel method to convert S- and racemic (RS-) ibuprofen (Ibu) into an oily state at ambient temperature (25 degrees C) was developed. Using menthol and aqueous isopropanol (IPA) as melting point depressing agents, the two-phase melt systems (TMSs) of Ibu consisting of a homogeneous oily phase and a homogeneous aqueous phase were obtained. In TMS with a high S-Ibu: menthol ratio and a low IPA content, the oily phase primarily consisted of Ibu and menthol, whereas the majority of the aqueous phase was IPA and buffer. Using this method, the S-Ibu concentration in the oily phase reached as high as 70% (w/w). The compositional phase diagram was obtained using a titration method to study the relationship between the melting states of the solid components and system composition. S- and RS-Ibu showed different phase diagrams, and the maximum concentration of S-Ibu measured in the oily phase of TMS was much greater than that of RS-Ibu. The permeation study of a series of TMS and non-TMS systems showed that S-Ibu penetrated through shed snake skin faster than RS-Ibu, and the contents of IPA and menthol significantly affected the permeation rates of ibuprofen across shed snake skin, which may be attributed to the higher lipophilicity, and thus, higher solubility of S-Ibu in the skin than RS-Ibu. Such results support the use of S-Ibu TMS for topical formulation development. PMID:15581071

  18. Aqueous two-phase systems of polyoxyethylene lauryl ether and potassium gluconate/potassium oxalate/potassium citrate at different temperature-experimental results and modeling of (liquid + liquid) equilibrium data

    International Nuclear Information System (INIS)

    Highlights: • The phase diagrams of POELE10-organic salts ATPSs were determined experimentally. • The experiential equations were used to correlate the binodal data. • The effect of salt on the binodal curve for the studied systems has been discussed. • The LLE data were correlated using the thermodynamic model. -- Abstract: The binodal data for the systems containing the POELE10 and KC6H11O7/K2C2O4/K3C6H5O7 were determined at the T = (288.15, 298.15, 308.15) K. The three experiential equations were used to fit the binodal data and they achieved the satisfactory fitting effect. The effect of salt type on the phase-seperation ability of salt was studied. It was found that the phase-seperation ability of the salt with the higher valence anion is stronger than that with lower valence anion, namely, the order of the phase-seperation ability for the investigated salts is potassium citrate > potassium oxalate > potassium gluconate, which is also validated by the effective excluded volume (EEV). The (liquid + liquid) equilibrium data for the studied systems were determined and correlated by using the Pitzer–Debye–Hückel equation and Chen-NRTL model along with the Flory–Huggins equation, and good agreement was obtained with using these thermodynamic models

  19. Effect of biochar addition on hydrogen and methane production in two-phase anaerobic digestion of aqueous carbohydrates food waste.

    Science.gov (United States)

    Sunyoto, Nimas M S; Zhu, Mingming; Zhang, Zhezi; Zhang, Dongke

    2016-11-01

    Effect of biochar addition on hydrogen and methane production in two-phase anaerobic digestion of aqueous carbohydrates was studied using bench-scale bioreactors. The cultures with biochar additions were placed in 100ml reactors and incubated at 35°C and pH 5 for hydrogen production. The residual cultures were then used for methane production, incubated at 35°C and pH 7. Daily yields of hydrogen and methane and weekly yield of volatile fatty acids (VFA) were measured. The hydrogen and methane production potentials, rate and lag phases of the two phases were analysed using the Gompertz model. The results showed that biochar addition increased the maximum production rates of hydrogen by 32.5% and methane 41.6%, improved hydrogen yield by 31.0% and methane 10.0%, and shortened the lag phases in the two phases by 36.0% and 41.0%, respectively. Biochar addition also enhanced VFA generation during hydrogen production and VFA degradation in methane production. PMID:27474855

  20. Ionic liquid-anionic surfactant based aqueous two-phase extraction for determination of antibiotics in honey by high-performance liquid chromatography.

    Science.gov (United States)

    Yang, Xiao; Zhang, Shaohua; Yu, Wei; Liu, Zhongling; Lei, Lei; Li, Na; Zhang, Hanqi; Yu, Yong

    2014-06-01

    An ionic liquid-anionic surfactant based aqueous two-phase extraction was developed and applied for the extraction of tetracycline, oxytetracycline and chloramphenicol in honey. The honey sample was mixed with Na2EDTA aqueous solution. The sodium dodecyl sulfate, ionic liquid 1-octyl-3-methylimidazolium bromide and sodium chloride were added in the mixture. After the resulting mixture was ultrasonically shaken and centrifuged, the aqueous two phase system was formed and analytes were extracted into the upper phase. The parameters affecting the extraction efficiency, such as the volume of ionic liquid, the category and amount of salts, sample pH value, extraction time and temperature were investigated. The limits of detection of tetracycline, oxytetracycline and chloramphenicol were 5.8, 8.2 and 4.2 μg kg(-1), respectively. When the present method was applied to the analysis of real honey samples, the recoveries of analytes ranged from 85.5 to 110.9% and relative standard deviations were lower than 6.9%. PMID:24767438

  1. A two-phase system call arguments attribute analyzing method

    Institute of Scientific and Technical Information of China (English)

    LI Hong-jiao; LI Jian-hua

    2008-01-01

    To detect more attacks aiming at key security data in program behavior-based anomaly detection, the data flow properties were formulated as unary and binary relations on system call arguments. A new method named two-phrase analysis (2PA) is designed to analyze the efficient relation dependency, and its description as well as advantages are discussed. During the phase of static analysis, a dependency graph was constructed according to the program's data dependency graph, which was used in the phase of dynamic learning to learn specified binary relations. The constructed dependency graph only stores the information of related arguments and events, thus improves the efficiency of the learning algorithm and reduces the size of learned relation de-pendencies. Performance evaluations show that the new method is more efficient than existing methods.

  2. Quaternary (liquid + liquid) equilibria of aqueous two-phase poly (ethylene glycol), poly (DMAM-TBAM), and KH2PO4: Experimental and generalized Flory-Huggins theory

    International Nuclear Information System (INIS)

    Quaternary (liquid + liquid) equilibrium (LLE) data of the aqueous two-phase poly (ethylene glycol), poly (N,N-dimethylacrylamide-t-butylacrylamide) with abbreviation name poly (DMAM-TBAM) as a hydrophobic association water-soluble copolymer and KH2PO4 has been determined experimentally at T = 338.15 K. Furthermore, the generalized Flory-Huggins theory with two electrostatic terms (the Debye-Hueckel and Pitzer-Debye-Hueckel) was used for correlation of the phase behavior of the quaternary system and the interaction parameters between all species were calculated. It was found that addition of poly (DMAM-TBAM) copolymer as well as changing the temperature can shift the binodal curves of aqueous two-phase systems containing polyethylene glycol (PEG) and salt. Also, the phase behavior of the DMAM-TBAM copolymer with some salts containing sodium chloride, ammonium hydrogen phosphate, potassium hydrogen phosphate, and sodium carbonate were studied experimentally at T = 338.15 K and the effect of the salt type on the their binodal curves was determined

  3. Symmetrical components and power analysis for a two-phase microgrid system

    DEFF Research Database (Denmark)

    Alibeik, M.; Santos Jr., E. C. dos; Blaabjerg, Frede

    2014-01-01

    This paper presents a mathematical model for the symmetrical components and power analysis of a new microgrid system consisting of three wires and two voltages in quadrature, which is designated as a two-phase microgrid. The two-phase microgrid presents the following advantages: 1) constant power...

  4. Individual extraction constants of some divalent metal cations in the two-phase water-nitrobenzene system

    International Nuclear Information System (INIS)

    From extraction experiments and ?-activity measurements, the exchange extraction constants corresponding to the general equilibrium M2+(aq) + Sr2+(nb) ↔ M2+(nb) + Sr2+(aq) taking part in the two-phase water-nitrobenzene system (M2+ = Mg2+, Ca2+, Ba2+, Cu2+, Zn2+, Cd2+, Pb2+, UO22+, Mn2+, Fe2+, Co2+, Ni2+; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the individual extraction constants of the M2+ cations in the mentioned two-phase system were calculated; they were found to increase in the following cation order: UO22+ 2+, Ni2+ 2+, Cd2+ 2+ 2+ 2+ 2+, Fe2+ 2+ 2+ 2+. (author)

  5. Individual extraction constants of some divalent metal cations in the two-phase water-phenyltrifluoromethyl sulfone system

    International Nuclear Information System (INIS)

    From extraction experiments and ?-activity measurements, the exchange extraction constants corresponding to the general equilibrium M2+ (aq) + Sr2+ (org) ↔ M2+ (org) + Sr2+ (aq) taking place in the two-phase water-phenyltrifluoromethyl sulfone (abbrev. FS 13) system (M2+ Mg2+, Ca2+, Ba2+, Cu2+, Zn2+, Cd2+, Pb2+, UO22+, Mn2+, Fe2+, Co2+, Ni2+; aq = aqueous phase, org = FS 13 phase) were evaluated. Furthermore, the individual extraction constants of the M2+ cations in this two-phase system were calculated; they were found to increase in the series of Mg2+, UO22+ 2+, Co2+ 2+, Ni2+ 2+ 2+, Mn2+, Fe2+ 2+ 2+. (author)

  6. Separation and determination of chloramphenicol in sewage using a small molecules-salt aqueous two-phase flotation system coupled with HPLC%小分子双水相浮选高效液相色谱法测定污水中痕量氯霉素

    Institute of Scientific and Technical Information of China (English)

    姚以亮; 关卫省

    2011-01-01

    用乙醇/磷酸氢二钾双水相体系浮选污水中的氯霉索,通过对盐的质量分数、有机溶剂的体积、气体流速和浮选时间的选择和优化,在理想条件下,氯霉素的平均浮选效率可以达到94%.该方法用于河水和鱼塘水样品中氯霉素的检测,检出限为0.5 ng/mL,加标回收率为89.44%~100.16%,相对标准偏差RSD为1.1%~2.1%,适用于污水中痕量氯霉素的分离/富集及分析测定.%C2H5OH/K2HPO4 two-phase aqueous system was used to floate CAP in sewage. By selecting and optimizing mass percentage of salt, volume of organic solvent, gas flow rate and flotation time, under the optimum conditions,the average floatation efficiency was up to 94% . The method used to detect CAP in the samples of river and pond water, the detection limit was 0. 5 ng/mL, the relative recovery was 89. 44% ~ 100. 16% with relative standard deviation RSD = 1. 1%~ 2. 1% . The method is applicable to analyze the trace CAP in swage.

  7. Distinguishing two-phase flow stability by using system identification method in a natural circulation system

    International Nuclear Information System (INIS)

    A research program on Two-phase flow stability in a natural circulation system has been executed in the Institute of Nuclear Energy Technology (INET), Tsinghua University in the development process of Nuclear Heating Reactor for the resent ten years. Two sets of experiment facility (HRTL-5 and HRTL-200) were erected, which serve as the simulator to the primary circuit of the nuclear heating reactor NHR-5 and NHR-200 separately, and were used for investigation on their thermo-physical behavior. Very important and useful results have been reached. The investigation presented, is one of the subject in the above mentioned research program. The main objective of the investigation is to develop a practical technology and method in engineering, based on general control theory, for distinguishing two-phase flow stability and identifying safety margin by using system identification method. By combining the two-phase flow stability theory in thermo-physics field with the system stability theory and system identification method in information science field, a thermo-hydraulic experiment technology with new concept was developed. The experiment was carried out on the thermohydraulic test system HRTL-5. Using reverse repeat pseudo-random sequences of heating power as the input signal sources and the measured flow rate as response function in the test, Two-phase flow stability and stability margin of the natural circulation system were investigated with analyzing the system pulse response function, Decay Ratio, and stability boundary under different operation conditions. The results are compared with that by using conventional method. The test system, test method and obtained typical results are provided

  8. Development of high pressure two-phase choked flow analysis methodology in complex piping system

    International Nuclear Information System (INIS)

    Choked flow mechanism, characteristics of two-phase flow sound velocity and compressibility effects on flow through various piping system components are studied to develop analysis methodology for high pressure two-phase choked flow in complex piping system which allows choking flow rate evaluation and piping system design related analysis. Piping flow can be said choked if Mach number is equal to 1 and compressibility effects can be accounted through modified incompressible formula in momentum equation. Based on these findings, overall analysis system is developed to study thermal-hydraulic effects on steady-state piping system flow and future research items are presented. (Author)

  9. Design, Modelling and Simulation of Two-Phase Two-Stage Electronic System with Orthogonal Output for Supplying of Two-Phase ASM

    OpenAIRE

    Michal Prazenica; Branislav Dobrucky; Peter Sekerak; Lukas Kalamen

    2011-01-01

    This paper deals with the two-stage two-phase electronic systems with orthogonal output voltages and currents - DC/AC/AC. Design of two-stage DC/AC/AC high frequency converter with two-phase orthogonal output using single-phase matrix converter is also introduced. Output voltages of them are strongly nonharmonic ones, so they must be pulse-modulated due to requested nearly sinusoidal currents with low total harmonic distortion. Simulation experiment results of matrix converter for both steady...

  10. Flow instabilities in two-phase flow system with and without phase change

    International Nuclear Information System (INIS)

    The gas-liquid two-phase flow of various types, such as single component or multiple components, and boiling two-phase flow or insulated two-phase flow, exist in piping systems, and the undesirable phenomena for the operation of systems such as the large scale pulsation of flow rate and the uneven distribution of flow may occur according to the condition. Generally these phenomena are called unstable flow. The author has carried out the research on unstable flow with air-water two-phase flow system, but a question arose to what extent the results in air-water system are applicable to boiling system. The unstable flow is explained with some examples. In this study, the similarity of pulsation in boiling system and insulated system was clarified, using the examples of pressure drop oscillation and flow rate distribution, and the theory to treat them in unified way was presented. The range of discussion is limited to the phenomena that do not depend on the microstructure of flow. The experimental setups were Freon boiling system, air-water capillary system and air-water vertical tube system. The characteristics of pressure drop oscillation and the fundamental mechanism, the theoretical analysis of pressure drop oscillation, the uneven distribution of flow rate in parallel tubes, the stability of flow rate distribution, and the numerical simulation are reported. (Kako, I.)

  11. Two-phase flow stability structure in a natural circulation system

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhiwei [Nuclear Engineering Laboratory Zurich (Switzerland)

    1995-09-01

    The present study reports a numerical analysis of two-phase flow stability structures in a natural circulation system with two parallel, heated channels. The numerical model is derived, based on the Galerkin moving nodal method. This analysis is related to some design options applicable to integral heating reactors with a slightly-boiling operation mode, and is also of general interest to similar facilities. The options include: (1) Symmetric heating and throttling; (2) Asymmetric heating and symmetric throttling; (3) Asymmetric heating and throttling. The oscillation modes for these variants are discussed. Comparisons with the data from the INET two-phase flow stability experiment have qualitatively validated the present analysis.

  12. Design, Modelling and Simulation of Two-Phase Two-Stage Electronic System with Orthogonal Output for Supplying of Two-Phase ASM

    Directory of Open Access Journals (Sweden)

    Lukas Kalamen

    2011-01-01

    Full Text Available This paper deals with the two-stage two-phase electronic systems with orthogonal output voltages and currents - DC/AC/AC. Design of two-stage DC/AC/AC high frequency converter with two-phase orthogonal output using single-phase matrix converter is also introduced. Output voltages of them are strongly nonharmonic ones, so they must be pulse-modulated due to requested nearly sinusoidal currents with low total harmonic distortion. Simulation experiment results of matrix converter for both steady and transient states for IM motors are given in the paper, also experimental verification under R-L load, so far. The simulation results confirm a very good time-waveform of the phase current and the system seems to be suitable for low-cost application in automotive/aerospace industries and application with high frequency voltage sources.

  13. RELAP5 two-phase fluid model and numerical scheme for economic LWR system simulation

    International Nuclear Information System (INIS)

    The RELAP5 two-phase fluid model and the associated numerical scheme are summarized. The experience accrued in development of a fast running light water reactor system transient analysis code is reviewed and example of the code application are given

  14. Separation of gas from liquid in a two-phase flow system

    Science.gov (United States)

    Hayes, L. G.; Elliott, D. G.

    1973-01-01

    Separation system causes jets which leave two-phase nozzles to impinge on each other, so that liquid from jets tends to coalesce in center of combined jet streams while gas phase is forced to outer periphery. Thus, because liquid coalescence is achieved without resort to separation with solid surfaces, cycle efficiency is improved.

  15. A SINDA modeling technique for pumped two-phase spacecraft cooling systems

    Science.gov (United States)

    Ollendorf, S.; Costello, F. A.

    1984-01-01

    The purpose of this paper is to present a modeling technique that has proven successful in simulating pumped, two-phase cooling systems. The technique uses the standard SINDA thermal-analysis program and thereby extends the capabilities of SINDA to complex, active spacecraft thermal-control systems. This paper provides sufficient detail that a current SINDA user will be able to apply the technique by reference to this paper alone.

  16. Evaluation of EIT systems and algorithms for handling full void fraction range in two-phase flow measurement

    International Nuclear Information System (INIS)

    In the aqueous-based two-phase flow, if the void fraction of dispersed phase exceeds 0.25, conventional electrical impedance tomography (EIT) produces a considerable error due to the linear approximation of the sensitivity back-projection (SBP) method, which limits the EIT’s wider application in the process industry. In this paper, an EIT sensing system which is able to handle full void fraction range in two-phase flow is reported. This EIT system employs a voltage source, conducts true mutual impedance measurement and reconstructs an online image with the modified sensitivity back-projection (MSBP) algorithm. The capability of the Maxwell relationship to convey full void fraction is investigated. The limitation of the linear sensitivity back-projection method is analysed. The MSBP algorithm is used to derive relative conductivity change in the evaluation. A series of static and dynamic experiments demonstrating the mean void fraction obtained using this EIT system has a good agreement with reference void fractions over the range from 0 to 1. The combination of the new EIT system and MSBP algorithm would significantly extend the applications of EIT in industrial process measurement. (paper)

  17. Efeitos do pH e massa molar do polímero sobre o sistema bifásico aquoso PEG/fosfato = Effects of polymer pH and molar mass on the PEG/phosphate aqueous two-phase system

    Directory of Open Access Journals (Sweden)

    Elias Basile Tambourgi

    2011-07-01

    Full Text Available A extração líquido-líquido usando sistemas bifásicos aquosos (SBA é uma técnica promissora na purificação de biomoléculas de interesse industrial e laboratorial. Este trabalho tem por objetivo apresentar um estudo do diagrama de equilíbrio de fases para diferentes massas molares de polietileno glicol (PEG (400 e 4000 e fosfato de potássio a pHs que variam entre 6 e 11, em condições normais de temperatura e pressão. A influência do peso molecular do PEG em diferentes pHs foram estudados nos diagramas de fases formados. Foram preparadas concentrações de 100 e 50% (p p-1 para o PEG 400 e 4000,respectivamente. A 20% (p p-1 de KH2PO4/K2HPO4, a solução estoque do sal fosfato foi também preparada de forma a obter os pHs desejados (6, 7, 8 e 9. Para os pHs 10 e 11 além dos sais, foi utilizada uma solução de NaOH 1M. Os resultados mostraram que menores concentrações de soluções foram utilizadas para formar o SBA com o PEG de maior massa molar. Por outro lado, não houve influência do pH nas curvas de equilíbrio, ou seja, um deslocamento significativo da binodal em relação aos diferentes pHs.Liquid-liquid extraction using aqueous two-phase systems (ATPSs is a promising technique for the purification of biomolecules of industrial and laboratory interest. This work presents a study of the phase diagrams for different poly(ethylene glycol (PEG molar masses (ranging from 400 to 4000 and potassium phosphate at pH varying from 6 to 11 in standard conditions. The influence of PEG molecular mass at different pHs was studied from the phase diagrams formed. Stocksolutions of PEG 400 and 4000 (100 and 50% w w-1, respectively and phosphate (20% w w-1 KH2PO4/K2HPO4 were prepared at the appropriate pH (6, 7, 8 and 9. For pHs 10 and 11, NaOH 1M was used in addition to the salts. The results showed that low concentrations were used to form the ATPS with high molecular mass PEG. On the other hand, there was no pH influence in the

  18. Extraction technology of pepsin from swine by PEG/(NH4)2SO4 aqueous two-phase system%聚乙二醇/硫酸铵双水相萃取猪胃蛋白酶工艺研究

    Institute of Scientific and Technical Information of China (English)

    张儒; 张变玲; 谢涛; 李谷才; 杨侃

    2012-01-01

    The pepsin was extracted and purified by PEG/(NH4)2SO4 aqueous two-phase system(ATPS)from stomach of swine.Extraction technology of pepsin using a newly established ATPS was investigated according to volume ratio(VR),purification factor(PF),specific activ%采用聚乙二醇/硫酸铵[PEG/(NH4)2SO4]建立稳定的双水相体系以分离猪胃蛋白酶。通过上下相体积比(VR)、比活力(SA)、纯化因子(PF)、酶活回收率(η)和SDS-聚丙烯酰胺凝胶电泳(SDS-PAGE)分析测定萃取效果。结果表明,萃取猪胃蛋白酶的最佳配比体系为25%PEG1000:18%(NH4)2SO4,所萃取的猪胃蛋白酶酶活回收率为91.5%,SDS-PAGE结果显示,萃取的蛋白质和猪胃蛋白酶对照品分子量大小一致。

  19. Design of a two-phase loop thermosyphon for telecommunications system(II): analysis and simulation

    International Nuclear Information System (INIS)

    A computer simulation is performed for a two-phase loop thermosyphon for the B-ISDN telecommunications. The aim of this code development is to provide capabilities to predict the affects of many variables on the performance of the proposed TLT system using different empirical correlations obtained from the literature for the evaporation and condensation, and the shape factors available. In this present study, the simulation code is based on the sectorial thermal resistance network built on the flow regimes of the two-phase flows involved. The nodal resistances are solved by the typical Gauss-Seidal iteration method. The code can predict whether the proposed design is possible based on the flooding limit calculation of the system and its results are compared with the experimental results

  20. Two-phase calculations and comparative flow experiments through heterogeneous orthogonal stratified systems

    Energy Technology Data Exchange (ETDEWEB)

    Laribi, S. (SONATRACH Centre de Recherche et Developpement, Boumerdes (Algeria)); Bertin, H.; Quintard, M. (Laboratoire ' Energetique et Phenomenes de Transfert' -ENSAM, URA CNRS 873, Talence (France))

    1995-01-01

    Experimental and theoretical results for two-phase flow in vertically stratified systems, the flow being normal to the strata, are presented. The experimental study is focused on the following points: (a) the initial oil-drainage process and the evolution of the water distribution during the capillary equilibrium process, and (b) the time evolution of the saturation fields during water-flooding experiments. Saturation fields were measured using a [gamma]-rays attenuation system. The physics of two-phase flow through vertically stratified porous media can be analysed by a large-scale averaging method. This methodology is described briefly; reference is made to previous publications for detailed presentation. The water-flooding experiments were interpreted using the large-scale averaging method, first in the quasi-static case, second using a simplified closure problem taking into account dynamic effects. The results show a better agreement between experimental and theoretical results when dynamic effects are taken into account

  1. The Influence of Morphology on the Charge Transport in Two-Phase Disordered Organic Systems

    OpenAIRE

    Woellner, Cristiano F.; Machado, Leonardo D.; Autreto, Pedro A.S.; Freire, Jose A.; Galvao, Douglas S.

    2015-01-01

    In this work we use a three-dimensional Pauli master equation to investigate the charge carrier mobility of a two-phase system, which can mimic donor-acceptor and amorphous- crystalline bulk heterojunctions. Our approach can be separated into two parts: the morphology generation and the charge transport modeling in the generated blend. The morphology part is based on a Monte Carlo simulation of binary mixtures (donor/acceptor). The second part is carried out by numerically solving the steady-...

  2. Two-phase distribution in the vertical flow line of a domestic wet central heating system

    Directory of Open Access Journals (Sweden)

    Ge Y.T.

    2013-04-01

    Full Text Available The theoretical and experimental aspects of bubble distribution in bubbly two-phase flow are reviewed in the context of the micro bubbles present in a domestic gas fired wet central heating system. The latter systems are mostly operated through the circulation of heated standard tap water through a closed loop circuit which often results in water supersaturated with dissolved air. This leads to micro bubble nucleation at the primary heat exchanger wall, followed by detachment along the flow. Consequently, a bubbly two-phase flow characterises the flow line of such systems. The two-phase distribution across the vertical and horizontal pipes was measured through a consideration of the volumetric void fraction, quantified through photographic techniques. The bubble distribution in the vertical pipe in down flow conditions was measured to be quasi homogenous across the pipe section with a negligible reduction in the void fraction at close proximity to the pipe wall. Such a reduction was more evident at lower bulk fluid velocities.

  3. A novel anaerobic two-phase system for biohydrogen production and in situ extraction of organic acid byproducts.

    Science.gov (United States)

    Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Le Bihan, Yann; Buelna, Gerardo

    2015-06-01

    Owing to CO2-free emission, hydrogen is considered as a potential green alternative of fossil fuels. Water is the major emission of hydrogen combustion process and gravimetric energy density of hydrogen is nearly three times more than that of gasoline and diesel fuel. Biological hydrogen production, therefore, has commercial significance; especially, when it is produced from low-cost industrial waste-based feedstock. Light independent anaerobic fermentation is simple and mostly studied method of biohydrogen production. During hydrogen production by this method, a range of organic acid byproducts are produced. Accumulation of these byproducts is inhibitory for hydrogen production as it may result in process termination due to sharp decrease in medium pH or by possible metabolic shift. For the first time, therefore, a two-phase anaerobic bioreactor system has been reported for biohydrogen production which involves in situ extraction of different organic acids. Among different solvents, based on biocompatibility oleyl alcohol has been chosen as the organic phase of the two-phase system. An organic:aqueous phase ratio of 1:50 has been found to be optimum for hydrogen production. The strategy was capable of increasing the hydrogen production from 1.48 to 11.65 mmol/L-medium. PMID:25575763

  4. A weighted residual approach to two-phase flow problems in nuclear systems

    International Nuclear Information System (INIS)

    Great effort has been spent toward the development of advanced two-phase flow codes which are able to describe the behaviour of steam-water mixtures in the coolant system of nuclear reactors. Most of this effort concentrated on modelling aspects; the numerical techniques employed in these newly developed codes are all based on the Finite Difference approach. During the past few years a novel method has been developed which seems to overcome some of the difficulties encountered in FD-applications. It is an asymmetric, separated region, weighted residual method. This paper describes recent refinements of the method which have been motivated by particular needs of two-phase flow problems. (author)

  5. Research and development of one dimensional two-phase system code used in PT-SCWR

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Y.; Jia, B. [Tsinghua Univ., Dept. of Engineering Physics, Beijing (China)

    2010-07-01

    The main content of this paper is to build up a program to simulate the PT-SCWR moderator system. The system is a passive two phase natural circulation loop and can be parted into two parts: loop and heat exchanger. Along the whole loop, we chose the two-fluid model to describe the physical phenomenon, while some particular equations are added for different characteristic. Finally, we simulate the test loop to gain the computational result. The results show that the system is able to remove the redundant heat of moderator and can help to design the parameters of the test facility. (author)

  6. Research and development of one dimensional two-phase system code used in PT-SCWR

    International Nuclear Information System (INIS)

    The main content of this paper is to build up a program to simulate the PT-SCWR moderator system. The system is a passive two phase natural circulation loop and can be parted into two parts: loop and heat exchanger. Along the whole loop, we chose the two-fluid model to describe the physical phenomenon, while some particular equations are added for different characteristic. Finally, we simulate the test loop to gain the computational result. The results show that the system is able to remove the redundant heat of moderator and can help to design the parameters of the test facility. (author)

  7. Inertia and compressibility effects on density waves and Ledinegg phenomena in two-phase flow systems

    International Nuclear Information System (INIS)

    Highlights: ► The stability influence of piping fluid inertia on two-phase instabilities is studied. ► Inlet inertia stabilizes the system while outlet inertia destabilizes it. ► High-order modes oscillations are found and analyzed. ► The effect of compressible volumes in the system is studied. ► Inlet compressibility destabilizes the system while outlet comp. stabilizes it. - Abstract: The most common kind of static and dynamic two-phase flow instabilities namely Ledinegg and density wave oscillations are studied. A new model to study two-phase flow instabilities taking into account general parameters from real systems is proposed. The stability influence of external parameters such as the fluid inertia and the presence of compressible gases in the system is analyzed. High-order oscillation modes are found to be related with the fluid inertia of external piping. The occurrence of high-order modes in experimental works is analyzed with focus on the results presented in this work. Moreover, both inertia and compressibility are proven to have a high impact on the stability limits of the systems. The performed study is done by modeling the boiling channel using a one dimensional equilibrium model. An incompressible transient model describes the evolution of the flow and pressure in the non-heated regions and an ideal gas model is used to simulate the compressible volumes in the system. The use of wavelet decomposition analysis is proven to be an efficient tool in stability analysis of several frequencies oscillations.

  8. Viscous singular shock profiles for a system of conservation laws modeling two-phase flow

    Science.gov (United States)

    Hsu, Ting-Hao

    2016-08-01

    This paper is concerned with singular shocks for a system of conservation laws via the Dafermos regularization ut + f(u)x = ɛtuxx. For a system modeling incompressible two-phase fluid flow, the existence of viscous profiles is proved using Geometric Singular Perturbation Theory. The weak convergence and the growth rate of the viscous solution are also derived; the weak limit is the sum of a piecewise constant function and a δ-measure supported on a shock line, and the maximum value of the viscous solution is of order exp ⁡ (1 / ɛ).

  9. Two-Phase Cryogenic Heat Exchanger for the Thermodynamic Vent System

    Science.gov (United States)

    Christie, Robert J.

    2011-01-01

    A two-phase cryogenic heat exchanger for a thermodynamic vent system was designed and analyzed, and the predicted performance was compared with test results. A method for determining the required size of the Joule-Thomson device was also developed. Numerous sensitivity studies were performed to show that the design was robust and possessed a comfortable capacity margin. The comparison with the test results showed very similar heat extraction performance for similar inlet conditions. It was also shown that estimates for Joule- Thomson device flow rates and exit quality can vary significantly and these need to be accommodated for with a robust system design.

  10. Fractionation of aqueous sodium salts by liquid-liquid extraction in aqueous two phase systems

    NARCIS (Netherlands)

    Milosevic, M.; Staal, K.J.J.; Bargeman, G.; Schuur, B.; Haan, de A.B.

    2014-01-01

    An important element in the work-up of brines is the separation of different ions present. Usually, energy consuming technologies, such as multi-stage evaporation, reverse osmosis, crystallization, and nanofiltration, are used to bring the composition of the brine to the required specification. Frac

  11. Enhanced translocation and growth of Rhodococcus erythropolis PR4 in the alkane phase of aqueous-alkane two phase cultures were mediated by GroEL2 overexpression.

    Science.gov (United States)

    Takihara, Hayato; Ogihara, Jun; Yoshida, Takao; Okuda, Shujiro; Nakajima, Mutsuyasu; Iwabuchi, Noriyuki; Sunairi, Michio

    2014-01-01

    We previously reported that R. erythropolis PR4 translocated from the aqueous to the alkane phase, and then grew in two phase cultures to which long-chain alkanes had been added. This was considered to be beneficial for bioremediation. In the present study, we investigated the proteins involved in the translocation of R. erythropolis PR4. The results of our proteogenomic analysis suggested that GroEL2 was upregulated more in cells that translocated inside of the pristane (C19) phase than in those located at the aqueous-alkane interface attached to the n-dodecane (C12) surface. PR4 (pK4-EL2-1) and PR4 (pK4-ΔEL2-1) strains were constructed to confirm the effects of the upregulation of GroEL2 in translocated cells. The expression of GroEL2 in PR4 (pK4-EL2-1) was 15.5-fold higher than that in PR4 (pK4-ΔEL2-1) in two phase cultures containing C12. The growth and cell surface lipophilicity of PR4 were enhanced by the introduction of pK4-EL2-1. These results suggested that the plasmid overexpression of groEL2 in PR4 (pK4-EL2-1) led to changes in cell localization, enhanced growth, and increased cell surface lipophilicity. Thus, we concluded that the overexpression of GroEL2 may play an important role in increasing the organic solvent tolerance of R. erythropolis PR4 in aqueous-alkane two phase cultures. PMID:25311591

  12. A component architecture for the two-phase flows simulation system Neptune

    International Nuclear Information System (INIS)

    Electricite de France (EdF) and the French atomic energy commission (Cea) have planed a large project to build a new set of software in nuclear reactors analysis. One of the main idea is to allow coupled calculations in which several scientific domains are involved. This paper presents the software architecture of the two-phase flows simulation Neptune project. Neptune should allow computations of two-phase flows in 3 dimensions under normal operating conditions as well as safety conditions. Three scales are identified: the local scale where there is only homogenization between the two phases, an intermediate scale where solid internal structures are homogenized with the fluid and the system scale where some parts of the geometry under study are considered point-wise or subject to one dimensional simplifications. The main properties of this architecture are as follow: -) coupling with scientific domains, and between different scales, -) re-using of quite all or parts of existing validated codes, -) components usable by the different scales, -) easy introducing of new physical modeling as well as new numerical methods, -) local, distributed and parallel computing. The Neptune architecture is based on the component concept with stable and well suited interface. In the case of a distributed application the components are managed through a Corba bus. The building of the components is organized in shell: a programming shell (Fortran or C++ routines), a managing shell (C++ language), an interpreted shell (Python language), a Corba shell and a global driving shell (C++ or Python). Neptune will use the facilities offered by the Salome project: pre and post processors and controls. A data model has been built to have a common access to the information exchanged between the components (meshes, fields, physical and technical information). This architecture has first been setup and tested on some simple but significant cases and is now currently in use to build the Neptune

  13. Extraction and characterization of polysaccharides from Semen Cassiae by microwave-assisted aqueous two-phase extraction coupled with spectroscopy and HPLC.

    Science.gov (United States)

    Chen, Zhi; Zhang, Wei; Tang, Xunyou; Fan, Huajun; Xie, Xiujuan; Wan, Qiang; Wu, Xuehao; Tang, James Z

    2016-06-25

    A novel and rapid method for simultaneous extraction and separation of the different polysaccharides from Semen Cassiae (SC) was developed by microwave-assisted aqueous two-phase extraction (MAATPE) in a one-step procedure. Using ethanol/ammonium sulfate system as a multiphase solvent, the effects of MAATPE on the extraction of polysaccharides from SC such as the composition of the ATPS, extraction time, temperature and solvent-to-material ratio were investigated by UV-vis analysis. Under the optimum conditions, the yields of polysaccharides were 4.49% for the top phase, 8.80% for the bottom phase and 13.29% for total polysaccharides, respectively. Compared with heating solvent extraction and ultrasonic assisted extraction, MAATPE exhibited the higher extraction yields in shorter time. Fourier-transform infrared spectra showed that two polysaccharides extracted from SC to the top and bottom phases by MAATPE were different from each other in their chemical structures. Through acid hydrolysis and PMP derivatization prior to HPLC, analytical results by indicated that a polysaccharide of the top phases was a relatively homogeneous homepolysaccharide composed of dominant gucose glucose while that of the bottom phase was a water-soluble heteropolysaccharide with multiple components of glucose, xylose, arabinose, galactose, mannose and glucuronic acid. Molar ratios of monosaccharides were 95.13:4.27:0.60 of glucose: arabinose: galactose for the polysaccharide from the top phase and 62.96:14.07:6.67: 6.67:5.19:4.44 of glucose: xylose: arabinose: galactose: mannose: glucuronic acid for that from the bottom phase, respectively. The mechanism for MAATPE process was also discussed in detail. MAATPE with the aid of microwave and the selectivity of the ATPS not only improved yields of the extraction, but also obtained a variety of polysaccharides. Hence, it was proved as a green, efficient and promising alternative to simultaneous extraction of polysaccharides from SC. PMID

  14. A multiscale thermo-fluid computational model for a two-phase cooling system

    Science.gov (United States)

    Sacco, Riccardo; Carichino, Lucia; de Falco, Carlo; Verri, Maurizio; Agostini, Francesco; Gradinger, Thomas

    2014-12-01

    In this paper, we describe a mathematical model and a numerical simulation method for the condenser component of a novel two-phase thermosyphon cooling system for power electronics applications. The condenser consists of a set of roll-bonded vertically mounted fins among which air flows by either natural or forced convection. In order to deepen the understanding of the mechanisms that determine the performance of the condenser and to facilitate the further optimization of its industrial design, a multiscale approach is developed to reduce as much as possible the complexity of the simulation code while maintaining reasonable predictive accuracy. To this end, heat diffusion in the fins and its convective transport in air are modeled as 2D processes while the flow of the two-phase coolant within the fins is modeled as a 1D network of pipes. For the numerical solution of the resulting equations, a Dual Mixed-Finite Volume scheme with Exponential Fitting stabilization is used for 2D heat diffusion and convection while a Primal Mixed Finite Element discretization method with upwind stabilization is used for the 1D coolant flow. The mathematical model and the numerical method are validated through extensive simulations of realistic device structures which prove to be in excellent agreement with available experimental data.

  15. Study of density wave phenomena in boiling and condensing two-phase flow systems

    International Nuclear Information System (INIS)

    In this work density wave oscillations are studied. This phenomenon have been widely studied for boiling systems with sub-cooled inlet condition in the past. The main purpose of this work is to characterize the stability region of boiling and condensing systems for sub-cooled and saturated inlet conditions. Stability maps, based on the sub-cooling and the phase-change numbers, are constructed. The limits of the unstable regions are identified and characterized. Finally some numerical simulations are presented in order to describe the nature of the involved phenomena. A high-order numerical solver, based on a homogenous two-phase model for a single boiling channel is implemented. (author)

  16. Ca2+ pump and Ca2+/H+ antiporter in plasma membrane vesicles isolated by aqueous two-phase partitioning from corn leaves

    International Nuclear Information System (INIS)

    Plasma membrane vesicles, which are mostly right side-out, were isolated from corn leaves by aqueous two-phase partitioning method. Characteristics of Ca2+ transport were investigated after preparing inside-out vesicles by Triton X-100 treatment. 45Ca2+ transport was assayed by membrane filtration technique. Results showed that Ca2+ transport into the plasma membrane vesicles was Mg-ATP dependent. The active Ca2+ transport system had a high affinity for Ca2+(Km(Ca2+) = 0.4 microM) and ATP(Km(ATP) = 3.9 microM), and showed pH optimum at 7.5. ATP-dependent Ca2+ uptake in the plasma membrane vesicles was stimulated in the presence of Cl- or NO3-. Quenching of quinacrine fluorescence showed that these anions also induced H+ transport into the vesicles. The Ca2+ uptake stimulated by Cl- was dependent on the activity of H+ transport into the vesicles. However, carbonylcyanide m-chlorophenylhydrazone (CCCP) and VO4(3-) which is known to inhibit the H+ pump associated with the plasma membrane, canceled almost all of the Cl(-)-stimulated Ca2+ uptake. Furthermore, artificially imposed pH gradient (acid inside) caused Ca2+ uptake into the vesicles. These results suggest that the Cl(-)-stimulated Ca2+ uptake is caused by the efflux of H+ from the vesicles by the operation of Ca2+/H+ antiport system in the plasma membrane. In Cl(-)-free medium, H+ transport into the vesicles scarcely occurred and the addition of CCCP caused only a slight inhibition of the active Ca2+ uptake into the vesicles. These results suggest that two Ca2+ transport systems are operating in the plasma membrane from corn leaves, i.e., one is an ATP-dependent active Ca2+ transport system (Ca2+ pump) and the other is a Ca2+/H+ antiport system. Little difference in characteristics of Ca2+ transport was observed between the plasma membranes isolated from etiolated and green corn leaves

  17. Space qualification of an experimental two-phase flow thermal management system

    International Nuclear Information System (INIS)

    The Weapons Laboratory will launch a space experiment in March 1991 to investigate the effects of extended microgravity on two-phase (liquid/vapor) flow. The qualification process for the experimental flight system hardware differs significantly from the process used for complex, high cost, long life space systems. Some development, qualification, and acceptance tests normally included in the test program of an operational space system were omitted because of the low program cost and low consequence of experiment failure. Key environment and functional qualification tests were performed, however, in an effort to reduce the risk of failure inherent in any space mission. The environmental qualification program included short duration vacuum chamber tests, reduced gravity missions onboard a National Aeronautics and Space Administration (NASA) test aircraft, and a complete series of shock and vibration tests. The functional qualification program centered on thermal-hydraulic system performance tests and a complete check-out of the unique telemetry system used to retrieve the experimental data from the payload. The test program also contains a number of acceptance and prelaunch validation tests to be performed as final verification of payloads readiness for spaceflight

  18. An analytical method for modeling two-phase gravity-driven drainage systems in BOP applications

    International Nuclear Information System (INIS)

    Highlights: ► An actual gravity drainage system in an operating power plant is described. ► A drain flow oscillation exists in the system, which is replicated using RELAP5. ► The RELAP model identifies that steam binding due to poor venting is the cause. ► The RELAP model shows that new vent piping prevents the flow oscillations. ► The revised vent piping is installed in the plant and resolves the flow oscillations. - Abstract: Two-phase gravity-driven drainage systems are used in many applications within nuclear power Balance of Plant (BOP) applications such as the drain lines for moisture separator re-heaters (MSRs) and feedwater heaters. Design of these systems is typically based on industry-oriented guidelines and operator-based experience. Changes in plant operation, such as uprates and equipment modification and/or replacement, are relatively common as plants seek to generate more power with greater efficiency. These plant modifications may inadvertently change system operation from design conditions and impose undesirable system transients. This paper seeks to provide a method for analyzing BOP drainage systems in an effort to characterize and mitigate drain flow transients. Previous methodologies diagnose and evaluate drain instability through measurement, empirical analysis, and operational experience. This paper identifies methods that can be utilized to generate computational models of discrete plant drainage systems that decrease the level of speculation involved in previous analyses. Additionally, a real-world application of this method is presented to demonstrate how computer modeling can accurately mimic plant transients.

  19. Two-phase experimental heat transfer studies on a water-diesel system in a shell and tube heat exchanger

    OpenAIRE

    V. Alagesan; Sundaram, S.

    2012-01-01

    Two-phase heat transfer involving two immiscible systems is gaining importance in petrochemical and allied industries. Varying compositions of diesel and water were experimentally studied in a 1:2 shell and tube heat exchanger. The data on pure water and diesel were fitted to an equation of the form. h1φ = a NmRe.The two-phase multiplier, Φ L, was related to the Lockhart Martinelli (L-M) parameter, χtt², using the two-phase data and a correlation Φ L = b+c(χtt²)+d/(&#...

  20. Development of an Enhanced Two-Phase Production System at the Geysers Geothermal Field; FINAL

    International Nuclear Information System (INIS)

    A method was developed to enhance geothermal steam production from two-phase wells at THE Geysers Geothermal Field. The beneficial result was increased geothermal production that was easily and economically delivered to the power plant

  1. Multinuclear NMR microscopy of two-phase fluid systems in porous rock.

    Science.gov (United States)

    Doughty, D A; Tomutsa, L

    1996-01-01

    The high-field magnetic resonance (MR) characteristics of fluids in porous reservoir rock exhibit short T2 relaxation times and broad natural line widths. These characteristics severely restrict which MR imaging (MRI) methodology can be used to obtain high-resolution porescale images of fluids in porous rock. An MR microscopy protocol based on 3D backprojection using strong imaging gradients was developed to overcome many of these constraints. To improve the image quality of two-phase systems, multinuclear MRI using proton MR to image the brine phase and 19F MR of a fluorinated hydrocarbon to image the oil phase was used. Resolution as high as 25 microns per pixel has been obtained for fluid systems in Bentheim and Fontainebleau sandstones. Separate proton and 19F images of brine and oil phases show good agreement with total saturation images. Software has been developed to perform 3D erosion/dilations and to extract the pore size distribution from binarized 3D images of fluid filled porosity. Results from pore size measurements show significant differences in the nature of the pore network in Fontainebleau and Bentheim sandstones. PMID:8970097

  2. Effective thermal conductivity of real two-phase systems using resistor model with ellipsoidal inclusions

    Indian Academy of Sciences (India)

    Jagjiwanram; Ramvir Singh

    2004-08-01

    A theoretical model has been developed for real two-phase system assuming linear flow of heat flux lines having ellipsoidal particles arranged in a three-dimensional cubic array. The arrangement has been divided into unit cells, each of which contains an ellipsoid. The resistor model has been applied to determine the effective thermal conductivity (ETC) of the unit cell. To take account of random packing of the phases, non-uniform shape of the particles and non-linear flow of heat flux lines in real systems, incorporating an empirical correction factor in place of physical porosity modifies an expression for ETC. An effort is made to correlate it in terms of the ratio of thermal conductivities of the constituents and the physical porosity. Theoretical expression so obtained has been tested on a large number of samples cited in the literature and found that the values predicted are quite close to the experimental results. Comparison of our model with different models cited in the literature has also been made.

  3. Hydrodynamic Dryout in Two-Phase Flows: Observations of Low Bond Number Systems

    Science.gov (United States)

    Weislogel, Mark M.; McQuillen, John B.

    1998-01-01

    Dryout occurs readily in certain slug and annular two-phase flows for systems that exhibit partial wetting. The mechanism for the ultimate rupture of the film is attributed to van der Waals forces, but the pace towards rupture is quickened by the surface tension instability (Rayleigh-type) of the annular film left by the advancing slug and by the many perturbations of the free surface present in the Re(sub g) approximately 0(10(exp 3)), Re(sub l) approximately 0(10(exp 4)), and Ca approximately 0(10(exp -1) flows. Results from low-gravity experiments using three different test fluids are presented and discussed. For the range of tests conducted, the effect of increasing viscosity is shown to eliminate the film rupture while the decrease of surface tension via a surfactant additive is shown to dramatically enhance it. Laboratory measurements using capillary tubes are presented which reveal the sensitivity of the dryout phenomena to particulate and surfactant contamination. Rom such observations, dryout due to the hydrodynamic-van der Waals instability can be expected in a certain range of flow parameters in the absence of heat transfer. The addition of heat transfer may only exacerbate the problem by producing thermal transport lines replete with "hot spots." A caution to this effect is issued to future space systems designers concerning the use of partially wetting working fluids.

  4. Comparative calculations on selected two-phase flow phenomena using major PWR system codes

    International Nuclear Information System (INIS)

    In 1988 a comparative study on important features and models in six major best estimate thermal hydraulic codes for PWR systems was implemented (Comparison of thermal hydraulic safety codes for PWR Graham, Trotman, London, EUR 11522). It was a limitation of that study that the source codes themselves were not available but the comparison had to be based on the available documentation. In the present study, the source codes were available and the capability of four system codes to predict complex two-phase flow phenomena has been assessed. Two areas of investigation were selected: (a) pressurized spray phenomena; (b) boil-up phenomena in rod bundles. As regards the first area, experimental data obtained in 1972 on the Neptunus Facility (Delft University of Technology) were compared with the results of the calculations using Athlet, Cathare, Relap 5 and TRAC-PT1 and, concerning the second area, the results of two experimental facilities obtained in 1980 and 1985 on Thetis (UKEA) and Pericles (CEA-Grenoble) were considered

  5. Quaternary (liquid + liquid) equilibria of aqueous two-phase poly (ethylene glycol), poly (DMAM-TBAM), and KH{sub 2}PO{sub 4}: Experimental and generalized Flory-Huggins theory

    Energy Technology Data Exchange (ETDEWEB)

    Foroutan, Masumeh [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of)], E-mail: foroutan@khayam.ut.ac.ir; Khomami, Marmar Haghighi [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of)

    2009-05-15

    Quaternary (liquid + liquid) equilibrium (LLE) data of the aqueous two-phase poly (ethylene glycol), poly (N,N-dimethylacrylamide-t-butylacrylamide) with abbreviation name poly (DMAM-TBAM) as a hydrophobic association water-soluble copolymer and KH{sub 2}PO{sub 4} has been determined experimentally at T = 338.15 K. Furthermore, the generalized Flory-Huggins theory with two electrostatic terms (the Debye-Hueckel and Pitzer-Debye-Hueckel) was used for correlation of the phase behavior of the quaternary system and the interaction parameters between all species were calculated. It was found that addition of poly (DMAM-TBAM) copolymer as well as changing the temperature can shift the binodal curves of aqueous two-phase systems containing polyethylene glycol (PEG) and salt. Also, the phase behavior of the DMAM-TBAM copolymer with some salts containing sodium chloride, ammonium hydrogen phosphate, potassium hydrogen phosphate, and sodium carbonate were studied experimentally at T = 338.15 K and the effect of the salt type on the their binodal curves was determined.

  6. Controlling the long-range corrections in atomistic Monte Carlo simulations of two-phase systems.

    Science.gov (United States)

    Goujon, Florent; Ghoufi, Aziz; Malfreyt, Patrice; Tildesley, Dominic J

    2015-10-13

    The long-range correction to the surface tension can amount to up to 55% of the calculated value of the surface tension for cutoffs in the range of 2.1-6.4 σ. The calculation of the long-range corrections to the surface tension and to the configurational energy in two-phase systems remains an active area of research. In this work, we compare the long-range corrections methods proposed by Guo and Lu ( J. Chem. Phys. 1997 , 106 , 3688 - 3695 ) and Janeček ( J. Phys. Chem. B 2006 , 110 , 6264 - 6269 ) for the calculation of the surface tension and of the coexisting densities in Monte Carlo simulations of the truncated Lennard-Jones potential and the truncated and shifted Lennard-Jones potential models. These methods require an estimate of the long-range correction at each step in the Monte Carlo simulation. We apply the full version of the Guo and Lu method, which involves the calculation of a double integral that contains a series of density differences, and we compare these results with the simplified version of the method which is routinely used in two-phase simulations. We conclude that the cutoff dependencies of the surface tension and coexisting densities are identical for the full versions of Guo and Lu and Janeček methods. We show that it is possible to avoid applying the long-range correction at every step by using the truncated Lennard-Jones potential with a cutoff rc ≥ 5 σ. The long-range correction can then be applied at the end of the simulation. The limiting factor in the accurate calculation of this final correction is an accurate estimate of the coexisting densities. Link-cell simulations performed using a cutoff rc = 5.5 σ require twice as much computing time as those with a more typical cutoff of rc = 3.0 σ. The application of the Janeček correction increases the running time of the simulation by less than 10%, and it can be profitably applied with the shorter cutoff. PMID:26574249

  7. Analysis of a potential two phase flow instability in a PWR passive auxiliary feedwater system

    International Nuclear Information System (INIS)

    The APR+ incorporates a passive auxiliary feedwater system (PAFS). The PAFS is comprised of two separate mechanical divisions. Each division is a closed loop which is aligned to feed condensed water to its corresponding steam generator (SG), and is equipped with one passive condensation heat exchanger (PCHX), some associated isolation/drain/vent valves, check valves, instrumentation and control, and pipes. The PAFS is designed to start its operation after reactor trip and maintain its function of residual heat removal for 8 hours or longer without AC power or operator action, and to ensure a subsequent cooldown of RCS to the shutdown cooling entry conditions. During the PAFS operation mode, steam in the SG secondary side moves up due to buoyancy force and passes through the main steam line, and then flows into the PCHX where steam is condensed inside the tubes of which the outer wall surfaces are cooled by the water stored in a condensation cooling tank. The condensate is passively fed into the SG economizer by gravity. Because a natural circulation loop is susceptible to two phase flow instability, it is requisite to confirm the PAFS is designed adequately to avoid the potential challenges to its operational safety due to the instability. This paper addresses an analytical model for assessing if the loop has possible thermal and fluid mechanical characteristics which could lead to an undesirable unstable or oscillating water level in the APR+ PAFS

  8. Basicity determination for neutral phosphorus organic extragents by NMR 31P-method in two-phase systems, and quantitative interrelations of acido-basic extractive properties

    International Nuclear Information System (INIS)

    Consideration is given to the method for determination of basicity of neutral organophosphorus compounds of XGZP=0 type (X, G, Z=C4H9, C8H17, C6H5). The method is based on change of chemical shift of phosphorus-31 nuclei in two-phase extraction system depending on acidity function HO, HA, HPO. It is shown that the method can be used for evaluation and forecasting of phosphine oxide ability in the processes of UO2SO4 solvent extraction from aqueous solutions of sulfuric acid

  9. Rheology of two-phase systems: A microphysical and observational approach

    Science.gov (United States)

    Platt, John P.

    2015-08-01

    Ductile shear zones commonly contain distinctive bands of high strain rock characterized by intimately mixed fine-grained two-phase or polyphase material. These ultramylonite bands are weaker than the surrounding material, and may play a critical role in strain localization. How such zones develop, how the phases become evenly dispersed, the bulk rheology, and the controls on grain size, are all unclear. The following generic scenario may resolve some of these questions. 1) Dislocation creep and dynamic recrystallization cause grain-size reduction: commonly, the recrystallized grain sizes of the two phases differ. 2) Grain size reduction causes a switch to grain-boundary diffusion creep, which requires grain-boundary sliding. Diffusion allows one phase to fill spaces that open between grains of the other: this will happen most rapidly in the finer-grained phase. The grain size of the resulting mixture is therefore controlled by that of the finer-grained phase. This leads to mixing and dispersion of the two phases, producing a fine-grained, evenly dispersed two-phase aggregate. 3) The bulk rheology will be controlled by grain-boundary diffusion creep of the two phases, with the grain size controlled by the finer-grained phase. Bulk flow laws can be developed for quartz-feldspar and olivine-orthopyroxene ultramylonites based on these concepts, using appropriate mixing laws.

  10. On some issues of the modeling and analysis of two phase flow systems

    International Nuclear Information System (INIS)

    Two-fluid and multi-field models are commonly used in the modeling and numerical simulation of two phase flows. They however present several mathematical and numerical difficulties, such as their lack of hyperbolicity or their non trivial Eigen-structure. It is important to understand the well-posedness of such possibly non hyperbolic systems before solving them numerically. For this reason, we study the solutions of systems of first order partial differential equations having a possibly complex Eigen-structure. We then characterise the hyperbolicity of the six equations two-fluid model with interfacial forces having differential expressions such as the interfacial pressure term, virtual mass and lift forces. The study of the characteristic polynomial leads to a diagram representing the location and topology of the non hyperbolic regions. We eventually propose numerous closure laws that make the two-fluid and multi-field models unconditionally hyperbolic. In order to numerically solve the two-fluid and multi-field models equations in a finite volume approach using a Roe type scheme, we propose two new algorithms designed for an efficient computation of the matrix absolute value function. These algorithms are robust as they avoid the computation of the eigenvectors of the argument matrix. The first is based on an iterative approach and converges in a finite number of steps if the eigenvalues are real. The second is faster, and besides can handle the case of complex eigenvalues. Thanks to these new algorithms, it is now possible to solve efficiently the six equations two-fluid model with differential interfacial terms, or the multi-field model with an arbitrary number of fields. We finally show the results of some recent numerical simulations of the six equations two-fluid model and the multi-field model with interfacial forces having a differential expression. (author)

  11. Release of lonapalene from two-phase emulsion-type ointment systems.

    Science.gov (United States)

    Ong, J T; Manoukian, E

    1988-01-01

    The in vitro release of lonapalene, a novel nonsteroidal antipsoriatic agent, was studied from two-phase emulsion-type ointment systems into a perfect sink of propylene carbonate at 32 degrees C. Lonapalene was completely solubilized in the ointments consisting of an internal phase of propylene carbonate (PC)-propylene glycol (PG) mixture dispersed within an external phase of a petrolatum base. The PC:PG ratio was varied to investigate separately the effects of (1) the initial concentration of lonapalene, (2) its saturation level, and (3) the volume fraction of the internal phase. The release profile consisted of an initial release rate which was higher than the ensuing diffusion-controlled release rate. The initial rate was attributed to the release of lonapalene from the surface globules of internal phase directly into the sink. Both rates increased with increasing lonapalene initial concentration in the ointment. For ointment systems in which the saturation level of lonapalene was kept constant, neither release rate was affected by the increasing volume fraction of the internal phase up to 12%. Further increase in this volume fraction to 25% afforded a significantly higher initial rate, while the diffusion-controlled rate was unchanged. However, an increase in the volume fraction of the internal phase with a concomitant decrease in the saturation level of lonapalene in the ointment resulted in a decrease in the initial rates and, to a lesser degree, the diffusion-controlled release rates. The diffusion coefficient in the external phase, calculated from the effective diffusion coefficient, was (2.68 +/- 0.24) X 10(-9) cm2/sec. PMID:3244603

  12. Calculating the hydraulic characteristics of two-phase-helium circulation systems

    Science.gov (United States)

    Gorbachev, S. P.

    1981-09-01

    An approximate analytical solution is obtained for calculating the pressure drop in the flows of a boiling two-phase liquid in a heated channel. The dependence of the maximum temperature in the channel on the rate of flow of the cryogenic fluid is determined.

  13. Scaling of the steady state and stability behaviour of single and two-phase natural circulation systems

    International Nuclear Information System (INIS)

    Scaling methods for both single-phase and two-phase natural circulation systems have been presented. For single-phase systems, simulation of the steady state flow can be achieved by preserving just one nondimensional parameter. For uniform diameter two-phase systems also, it is possible to simulate the steady state behaviour with just one non-dimensional parameter. Simulation of the stability behaviour requires geometric similarity in addition to the similarity of the physical parameters appearing in the governing equations. The scaling laws proposed have been tested with experimental data in case of single-phase natural circulation. (author)

  14. A Novel and Sensitive Method for the Determination of Vitamin B2 (Riboflavin in Urine and Pharmaceutical Samples Using an Aqueous Two-Phase Extraction

    Directory of Open Access Journals (Sweden)

    Sabah Shiri

    2013-01-01

    Full Text Available A novel, simple, and more sensitive spectrophotometric procedure has been developed for the determination of vitamin B2 (riboflavin by an aqueous two-phase extraction (ATPE. An ATPE is formed mostly by water and does not require an organic solvent. Other ATPE components used in this study were the polymer, polyethylene glycol (PEG, and some salts such as Na2SO4 and Na2CO3. The method is based on the interaction between vitamin B2 (riboflavin and sodium sulfate (Na2SO4 in an acidic medium (pH 6.4. The influences of effective parameters such as salt (type and concentration, polyethylene glycol (molecular weight and concentration, temperature, centrifuging time, and pH of the sample solution were studied and optimized. The linear range was 1.3–320 ng/mL (R2=0.9991; n=10 with the relative standard deviation (RSD for 60 ng/mL 3.68%. The limit of detection (LOD calculated from three times of standard deviation of blank were 0.2 ng/mL and recoveries from analysis of real samples between 94.82% and 103.98% were obtained for the determination of vitamin B2 (riboflavin in urine and pharmaceutical samples.

  15. Cloning of Toluene 4-Monooxygenase Genes and Application of Two-Phase System to the Production of the Anticancer Agent, Indirubin.

    Science.gov (United States)

    Wongsaroj, Lampet; Sallabhan, Ratiboot; Dubbs, James M; Mongkolsuk, Skorn; Loprasert, Suvit

    2015-08-01

    Indirubin is a strong inhibitor of several eukaryotic cell signaling pathways and shows promise as a treatment for myelocytic leukemia and Alzheimer's disease. The tmoABCDEF operon, encoding the components of a novel toluene 4-monooxygenase from the paint factory soil isolate, Pseudomonas sp. M4, was cloned and expressed in Escherichia coli. E. coli::pKSR12 expressing the tmo genes was used to develop a two-phase [dioctyl phthalate (DOP)/aqueous medium] culture system that was optimized to obtain maximal yields of indirubin from the starting substrate, indole. DOP was used as the organic phase to solubilize and sequester the toxic indole substrate, making possible the use of high indole concentrations that would otherwise interfere with growth in aqueous media. A 50 % (v/v) DOP two-phase system using tryptophan medium containing 3 mM cysteine, 5 mM indole, and 1 mM isatin yielded 102.4 mg/L of indirubin with no conversion of indole to the less valuable alternate product, indigo. PMID:25779640

  16. Study on the stability behaviour of two-phase natural circulation systems using a four-equation drift flux model

    International Nuclear Information System (INIS)

    Theoretical investigations were carried out to study the influence of two-phase flow parameters such as friction factor multiplier, drift velocity and void distribution parameter on the stability of boiling two-phase natural circulation systems. The theoretical model considers a four-equation drift flux model which solves the linearised conservation equations of mass, momentum and energy applicable to boiling two-phase natural circulation systems. The model was applied to three boiling natural circulation loops wherein Type I and Type II instabilities were observed over a wide range of operating pressures. The two-phase friction loss was predicted using different friction factor multiplier models available in literature. It was found that these models influence the steady state and threshold powers for stability, especially the Type II instabilities in natural circulation significantly. Since the void fraction depends on the drift velocity and the void distribution parameter in two-phase flow, these parameters were varied and their effects on the natural circulation flow stability were investigated. It was found that an increase in either the drift velocity or the void distribution parameter reduces the unstable regions observed in the Type I or Type II flow instabilities in two-phase natural circulation systems. Further, investigations were carried out to study the effect of loop diameter on the Type I and Type II instabilities in natural circulation. This study is important to reveal the capability of the reduced diameter scaled facilities of the prototype systems to simulate natural circulation instabilities. The results indicate that with increase in the loop diameter, the threshold power of the Type I instability and the Type II instability increases. Moreover, the stability of natural circulation greatly enhances with increase in the diameter of the loop

  17. The solubility of gallium oxide in vapor and two-phase fluid filtration in hydrothermal systems

    Science.gov (United States)

    Bychkov, Andrew; Matveeva, Svetlana; Nekrasov, Stanislav

    2010-05-01

    -4 to 8×10-4 mass ratio). The muscovite type veins has no separation between gas and liquid due to there thickness and small pressure gradient. There is no difference in Ga/Al ratio in muscovite from this veins. The Spokoinoe deposit is classified by mineralized dome type. The heterogenization of fluid occurs in H2O-CO2 system for water phase and carbon dioxide with temperature decreasing. Two-phase flow is separated in granite, forming greisen metosomatites. The Ga/Al ratio in rock increase up to 3 times to the upper part of metasomatitic zone. The Ga/Al ratio in muscovite can be applied for other hydrothermal systems for geochemical indicator of gas phase separation and condensation zone determination. This work is supported by RFBR project 10-05-00670 and 10-05-00320.

  18. A numerical method for a model of two-phase flow in a coupled free flow and porous media system

    KAUST Repository

    Chen, Jie

    2014-07-01

    In this article, we study two-phase fluid flow in coupled free flow and porous media regions. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the porous medium region. We propose a Robin-Robin domain decomposition method for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Numerical examples are presented to illustrate the effectiveness of this method. © 2014 Elsevier Inc.

  19. Catalysis of Oxygen Reduction by Metal-Free Porphyrins in One- and Two-Phase Liquid Systems

    Czech Academy of Sciences Publication Activity Database

    Samec, Zdeněk; Langmaier, Jan; Trojánek, Antonín; Záliš, Stanislav

    vol. 34. Harnessing Solar Energy. New Jersey: World Scientific Publ, 2014, s. 97-146. ISBN 978-981-4417-28-0 R&D Projects: GA ČR GAP208/11/0697 Institutional support: RVO:61388955 Keywords : catalysis * two-phase liquid systems * oxygen reduction Subject RIV: CG - Electrochemistry

  20. Technique and apparatus for two-phase systems analysis directly in a flow

    International Nuclear Information System (INIS)

    Method and apparatus for X-ray spectrum analysis of flowing material, and particularly where the material has two phases such as a suspension. A flow of gas or floats are used to separate the flowing material from an X-ray window in a casing containing an X-ray source and detector, which casing is located directly in the stream of flowing material. The gas flow provides a protective curtain across the window. An electrode structure is moveably mounted adjacent to the window and enables the solid state phase to be deposited for separated analysis of the solid and liquid phases of the flowing material

  1. Interfacial thermodynamics and electrochemistry of protein partitioning in two-phase systems.

    NARCIS (Netherlands)

    Fraaije, J.G.E.M.

    1987-01-01

    The subject of this thesis is protein partition between an aqueous salt solution and a surface or an apolair liquid and the concomitant co-partition of small ions. The extent of co-partitioning determines the charge regulation in the protein partitioning process.Chapters 2 and 3 deal with phenomenol

  2. Particle sizing in dense two-phase droplet systems by ultrasonic attenuation and velocity spectra

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Size and size distribution of particles in particulate two-phase flow play an important role in a wide variety of industrial areas,while their measurement still remains a hard task till now.Ultrasonic wave as a mechanical vibration contains plenty of information about medium when it passes through.Thus the size distribution could be extracted from the measured ultrasonic attenuation and velocity spectra by means of well established models and data processing techniques.This paper contributes to the extraction of information of droplet size of a two-phase fat emulsion simultaneously from signals of broad-band ultrasonic attenuation and velocity spectra.According to the formulated single particle scattering model,the relationship between particle size distribution and ultrasonic spectrum is estab-lished.The sensitivities of ultrasonic spectra to the variation of particle size are illustrated.Distin-guishing features for attenuation and velocity spectra are summarized.Demonstration calculations of inversion by optimum regularization factor method are carried out to yield the typical numerical results for discussion.Based on the proposed inversion algorithm and theoretical model,a fat emulsion sam-ple with a volume fraction up to 20% is measured and analyzed.To validate the proposed ultrasonic spectrum particle sizing method,the results are compared to those obtained from optical measure-ment.

  3. Particle sizing in dense two-phase droplet systems by ultrasonic attenuation and velocity spectra

    Institute of Scientific and Technical Information of China (English)

    SU MingXu; CAI XiaoShu; XUE MingHua; DONG LiLi; XU Feng

    2009-01-01

    Size and size distribution of particles in particulate two-phase flow play an important role in a wide va-riety of industrial areas, while their measurement still remains a hard task till now. Ultrasonic wave as a mechanical vibration contains plenty of information about medium when it passes through. Thus the size distribution could be extracted from the measured ultrasonic attenuation and velocity spectra by means of well established models and data processing techniques. This paper contributes to the ex-traction of information of droplet size of a two-phase fat emulsion simultaneously from signals of broad-band ultrasonic attenuation and velocity spectra. According to the formulated single particle scattering model, the relationship between particle size distribution and ultrasonic spectrum is estab-lished. The sensitivilles of ultrasonic spectra to the variation of particle size are illustrated. Distin-guishing features for attenuation and velocity spectra are summarized. Demonstration calculations of inversion by optimum regularization factor method are carried out to yield the typical numerical results for discussion. Based on the proposed inversion algorithm and theoretical model, a fat emulsion sam-ple with a volume fraction up to 20% is measured and analyzed. To validate the proposed ultrasonic spectrum particle sizing method, the results are compared to those obtained from optical measure-ment.

  4. Analysis of a two-phase system of mass transfer and electro-reduction of uranium(VI) in nitric acid-hydrazine media

    International Nuclear Information System (INIS)

    Simulation for a dynamic analysis of the electrolytic preparation of U(IV) in two-phases system, which consisted of mass transfer of U(VI) from TBP phase into HNO3 solution and electrolytic reduction of U(VI) to U(IV) at a cathode in aqueous phase, was carried out in order to establish the most suitable operating condition and best electrode area as basic design data for the system. It was found that maintaining an appropriate mass transfer rate was more significant rather than enlarging the surface area of the cathode for more effective production yield of U(IV). The electrode area and the operation time affected deeply the production composition of U(IV) in the resulting aqueous phase. And optimal electrode areas were evaluated to meet production criteria of U(IV) of resulting solution in several system conditions. Though about 0.37M HNO3 was preferable to prepare the solution of U(IV), nitric acid concentration should be higher than 0.5M to prevent a hydrolysis of U(IV) in the aqueous phase. 6 figs., 24 refs. (Author)

  5. Hamiltonian structure and Lyapunov stability of a hyperbolic system of two-phase flow equations including surface tension

    International Nuclear Information System (INIS)

    This paper: (1) provides the Hamiltonian formulation of the hyperbolic system of two-phase flow equations for separated flows including surface tension; (2) shows that equilibrium solutions of this system are critical states of a certain sum of conserved functionals; and (3) determines sufficient conditions for Lyapunov stability of the equilibrium solutions in two dimensions. The method used to establish the Lyapunov stability conditions incorporates recent advances in the Hamiltonian theory of continuum systems

  6. Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure

    International Nuclear Information System (INIS)

    In systems where the design inlet and outlet pressures P sub amb are maintained above the thermodynamic critical pressure P sub c, it is often assumed that heat and mass transfer are governed by single-phase relations and that two-phase flows cannot occur. This simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines, boilers, and other systems where two-phase regions can exist even though P sub amb P sub c. Heat and mass transfer and rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two-phase zone can differ significantly from those for a single-phase zone. By using a laminar, variable-property bearing code and a rotating boiler code, pressure and temperature surfaces were determined that illustrate nesting of a two-phase region within a supercritical pressure region. The method of corresponding states is applied to bearings with reasonable rapport

  7. Two-phase counter-current flow limitations in complex piping systems

    International Nuclear Information System (INIS)

    Experiments have been performed to investigate two-phase air-water counter-current flow limitations in two complex geometry test sections. One of the test sections was chosen to represent the complexity of CANDU feeders, at a 1:4 scale. In the second configuration, the effect of declining the horizontal parts of the test section was investigated. For the tested geometry, the results showed that the onset of flooding occurs at lower gas velocity as compared to those required to initiate flooding in vertical tubes or single 90 deg vertical bends. However, the critical gas velocity at the zero liquid penetration limit was found to be comparable to that of a 90 deg vertical bend. (author) 18 refs., 78 figs

  8. Low Energy Consumption Technique for Processing Rapeseed with Two-phase Extraction System without Ammonia

    Institute of Scientific and Technical Information of China (English)

    Shi Meiren; Qin Jinping; SQian Renyuan

    2000-01-01

    the mother liquid of methanol phase obtained from rapeseed two-phase extraction process can directly be reused in large amounts to process rapeseed again together with some fresh methanol phase, so long as it is treated with a litter of proper additives in advance. The ratio of the reused mother liquid may be more than 3/ 4 of the total amount of the methanol phase needed for processing rapeseed, so the energy consumption can be decreased tremendously. The meal obtained by use of the reused mother liquid keeps the quality as good as those obtained by use of totally fresh methanol phase with light color, weak taste, crispness, good palatability, high protein content, and a low level of glucosinolates much more less than that stipulated by the State for the fodder of grade A.

  9. A simple form of 5-PDE system describing the transient one dimensional nonhomogeneous nonequilibrium two-phase flow

    International Nuclear Information System (INIS)

    The entropies of the steam and liquid phase are used as components of an auxiliary dependent variables vector in the description of the nonhomogenous, nonequilibrium two-phase flow. A very simple working form of the PDE-system was obtained. The change of the kinetic and potential energy is also taken into account. From the steady-state system an expression is found defining the critical mass flow rate. (orig.)

  10. Mars Aqueous Processing System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mars Aqueous Processing System (MAPS) is an innovative method to produce useful building materials from Martian regolith. Acids and bases produced from the regolith...

  11. Mars Aqueous Processing System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Mars Aqueous Processing System (MAPS) is a novel technology for recovering oxygen, iron, and other constituents from lunar and Mars soils. The closed-loop...

  12. Two-phase control absorber development program: out-reactor tests and analysis to establish system operating characteristics

    International Nuclear Information System (INIS)

    The two-phase control absorber system uses a continuously flowing mixture of borated water and oxygen to regulate neutron flux in a reactor core. By varying the flow of water through the absorber element, the density and hence the neutron absorption of the mixture is controlled. The test facility was subjected to a comprehensive experimental program at different operating pressures to establish system operating characteristics so that a conceptual design for a power reactor could be developed. It was possible to establish the density operating range of the absorber, determine the desired water-valve flow characteristic required for constant gain in the flux regulating loop, validate the computer code which would be used for the static calculatons required for the conceptual design of an absorber system for a power reactor, and validate a dynamic, hybrid computer simulation of the two-phase control abosrber. (auth)

  13. Visualization of Two Phase Natural Convection Flow in a Vertical Pipe using the Sulfuric Acid - Copper Sulfate Electroplating System

    International Nuclear Information System (INIS)

    The passive containment cooling system (PCCS) driven by natural forces convection gain draws research interests after Fukushima NPP accident. The PCCS was classified into three categories: Containment pressure suppression, Containment passive heat removal/pressure suppression systems and Passive containment spray. Among the types of containment passive heat removal/pressure suppression systems, the system composed of an internal heat exchanger and an external coolant tank is considered. In a severe accident condition, the heat from the containment atmosphere is transferred to the outer surface of the heat exchanger by the convection and condensation of the mixture of steam and gases. On the other hand, the heat is transferred to external pool by single phase or two phase natural convection inside of heat exchanger pipes. The study aimed at investigating the influence of the diameter (D) and height (H) of the heat exchanger pipes on the single phase and two phase natural convection heat transfer. As the initial stage of the study, the two phase natural convection flow inside a vertical pipe is visualized. In order to achieve the aim with ample test rig, a sulfuric acid - cooper sulfate electroplating system was employed based on the analogy between heat and mass transfer. The reduction of hydrogen ion at the cathode surface at high potential was used to simulate the boiling phenomena. This study tried to visualize the boiling heat transfer inside a vertical pipe using a cupric acid-copper sulfate (H2SO4-CuSO4) electroplating system. This seems to be successful so far. However further study has to be done to compare the result with real two phase flow situation. The surface tension and surface characteristics are to be tuned to simulate the real situation

  14. Visualization of Two Phase Natural Convection Flow in a Vertical Pipe using the Sulfuric Acid - Copper Sulfate Electroplating System

    Energy Technology Data Exchange (ETDEWEB)

    Ohk, Seung-Min; Chae, Myeong-Seon; Chung, Bum-Jin [Kyung Hee Univ., Yongin (Korea, Republic of)

    2014-10-15

    The passive containment cooling system (PCCS) driven by natural forces convection gain draws research interests after Fukushima NPP accident. The PCCS was classified into three categories: Containment pressure suppression, Containment passive heat removal/pressure suppression systems and Passive containment spray. Among the types of containment passive heat removal/pressure suppression systems, the system composed of an internal heat exchanger and an external coolant tank is considered. In a severe accident condition, the heat from the containment atmosphere is transferred to the outer surface of the heat exchanger by the convection and condensation of the mixture of steam and gases. On the other hand, the heat is transferred to external pool by single phase or two phase natural convection inside of heat exchanger pipes. The study aimed at investigating the influence of the diameter (D) and height (H) of the heat exchanger pipes on the single phase and two phase natural convection heat transfer. As the initial stage of the study, the two phase natural convection flow inside a vertical pipe is visualized. In order to achieve the aim with ample test rig, a sulfuric acid - cooper sulfate electroplating system was employed based on the analogy between heat and mass transfer. The reduction of hydrogen ion at the cathode surface at high potential was used to simulate the boiling phenomena. This study tried to visualize the boiling heat transfer inside a vertical pipe using a cupric acid-copper sulfate (H{sub 2}SO{sub 4}-CuSO{sub 4}) electroplating system. This seems to be successful so far. However further study has to be done to compare the result with real two phase flow situation. The surface tension and surface characteristics are to be tuned to simulate the real situation.

  15. Quantitative study on experimentally observed poroelastic behavior of Berea sandstone in two-phase fluid system

    Science.gov (United States)

    Goto, Hiroki; Aichi, Masaatsu; Tokunaga, Tomochika; Yamamoto, Hajime; Ogawa, Toyokazu; Aoki, Tomoyuki

    2014-08-01

    Coupled two-phase fluid flow and poroelastic deformation of Berea sandstone is studied through laboratory experiment and numerical simulation. In the experiment, compressed air was infiltrated from the bottom of a water-saturated cylindrical Berea sandstone sample under hydrostatic external stress condition. Both axial and circumferential strains at half the height of the sample showed sudden extension and monotonic and gradual extension afterward. Numerical simulation based on thermodynamically consistent constitutive equations was conducted in order to quantitatively analyze the experimental results. In a simulation assuming isotropy of material properties, the volumetric discharge rate of water at the outlet and one of the axial, circumferential, and volumetric strains at half the height of the sample were reproduced well by each parameter set, while the other two strains were not. When introducing transverse isotropy, all the experimental data were reproduced well. In addition, the effect of saturation dependency of Bishop's effective stress coefficient on the deformation behavior of porous media was discussed, and it was found that strains, both axial and circumferential, are sensitive to the coefficient.

  16. Two-phase anaerobic digestion within a solid waste/wastewater integrated management system.

    Science.gov (United States)

    De Gioannis, G; Diaz, L F; Muntoni, A; Pisanu, A

    2008-01-01

    A two-phase, wet anaerobic digestion process was tested at laboratory scale using mechanically pre-treated municipal solid waste (MSW) as the substrate. The proposed process scheme differs from others due to the integration of the MSW and wastewater treatment cycles, which makes it possible to avoid the recirculation of process effluent. The results obtained show that the supplying of facultative biomass, drawn from the wastewater aeration tank, to the solid waste acidogenic reactor allows an improvement of the performance of the first phase of the process which is positively reflected on the second one. The proposed process performed successfully, adopting mesophilic conditions and a relatively short hydraulic retention time in the methanogenic reactor, as well as high values of organic loading rate. Significant VS removal efficiency and biogas production were achieved. Moreover, the methanogenic reactor quickly reached optimal conditions for a stable methanogenic phase. Studies conducted elsewhere also confirm the feasibility of integrating the treatment of the organic fraction of MSW with that of wastewater. PMID:18191559

  17. Amphiphilic polysaccharides: Stabilization of dispersed two-phase systems and gelling properties of chitosans and propylene glycol alginates

    OpenAIRE

    Julie, Nilsen-Nygaard

    2015-01-01

    For many of the polysaccharides with reported surface active and emulsifying properties, this has been attributed to an associated protein fraction. However, certain polysaccharides, such as chitosans and propylene glycol alginates, possess inherent amphiphilic properties. These polysaccharides have the potential of acting as sole stabilizers in dispersed two-phase systems such as O/W emulsions and foams by virtue of combing their interfacial and gel forming properties, thereby om...

  18. Analysis on two-phase flow behavior for natural circulation system in 5 MW nuclear heating reactor

    International Nuclear Information System (INIS)

    The experiment was carried out on a test loop HRTL-5 simulating the geometry and system design of the 5 MW Nuclear heating reactor, while the analysis was based on a one-dimensional two-phase flow drift model with conservation equations for mass, steam, energy and momentum. Clausius-Clapeyron equation was used for the calculation of flashing front in the riser. A set of ordinary differential equation, describing the behavior of two-phase flow in the natural circulation system, was derived through integration of the above conservation equations in subcooled boiling region, bulk boiling region in the heated section and in the riser. the method of time-domain was used for the calculation. The results show that, firstly, subcooled boiling in the heated section and void flashing in the riser have significant influence on the distribution of the void fraction, mass flow rate and stability of the system, especially at lower pressure; secondly, in a wide range of two-phase flow conditions, only subcooled boiling occurs in the heated section. The propagation behavior of flow oscillation was also studied. Calculated results agree with experimental data well at the 5 MW nuclear reactor conditions

  19. Biogas production from anaerobic co-digestion of food waste with dairy manure in a two-phase digestion system.

    Science.gov (United States)

    Li, Rongping; Chen, Shulin; Li, Xiujiu

    2010-01-01

    Co-digestion of food waste and dairy manure in a two-phase digestion system was conducted in laboratory scale. Four influents of R0, R1, R2, and R3 were tested, which were made by mixing food waste with dairy manure at different ratios of 0:1, 1:1, 3:1, and 6:1, respectively. For each influent, three runs of experiments were performed with the same overall hydraulic retention time (HRT) of 13 days but different HRT for acidification (1, 2, and 3 days) and methanogenesis (12, 11, and 10 days) in two-phase digesters. The results showed that the gas production rate (GPR) of co-digestion of food waste with dairy manure was enhanced by 0.8-5.5 times as compared to the digestion with dairy manure alone. Appropriate HRT for acidification was mainly determined by the biodegradability of the substrate digested. Three-, 2-, and 1-day HRT for acidification were found to be optimal for the digestion of R0, R1, and R2/R3, respectively, when overall HRT of 13 days was used. The highest GPR of 3.97 L/L.day was achieved for R3(6:1) in Run 1 (1 + 12 days), therefore, the mixing ratio of 6:1 and HRT of 1 day for acidification were considered to be the optimal ones and thus recommended for co-digestion of food waste and dairy manure. There were close correlations between degradation of organic matters and GPR. The highest VS removal rate was achieved at the same HRT for acidification and mixing ratio of food waste and dairy manure as GPR in the co-digestion. The two-phase digestion system showed good stability, which was mainly attributed to the strong buffering capacity with two-phase system and the high alkalinity from dairy manure when co-digested with food waste. PMID:19214795

  20. Effect of Mechanical Stress on Magnetic States and Hysteresis Characteristics of a Two-Phase Nanoparticles System

    Directory of Open Access Journals (Sweden)

    Leonid Lazarevich Afremov

    2013-01-01

    Full Text Available In terms of the two-phase nanoparticles model, the effect of mechanical stress on the magnetic state of both uniaxial and multiaxial heterophase magnetic is investigated. The spectrum of critical fields of reversal of phases' magnetic moments was calculated and phase diagrams were drawn to assess the effect of mechanical stress on the degree of metastability of two-phase nanoparticles' magnetic states. By the example of epitaxial cobalt-coated -Fe2O3 particles, a theoretical analysis of the effect of uniaxial mechanical stress on the magnetization of a system of noninteracting heterophase nanoparticles is investigated. It was shown that tension reduced and compression increased coercive force , while the residual saturation magnetization was not changed under the influence of mechanical stress.

  1. Innovation design of beta test loop system for heat transfer experiments in single-phase and two-phase flows

    International Nuclear Information System (INIS)

    Innovation design of BETA test loop has been done. BETA test loop is a research facility used as a support for experiments of reactor accident simulation. The innovation was performed to prepare experimental facilities in order to study flow of heat transfer in single-phase and two-phase flows. The design was executed by modifying new piping of UUB's primary system, addition of heat flux measurements and imaging thermal for easiness of experimental result analysis. UUB development and experiments were carried out to understand heat transfer process in the narrow gap of two-phase flow considering this phenomenon is one of the conditions postulated in PWR typed nuclear power plant accident scenario. The innovation design of BETA test loop is still in the planning stages so that the design has not been constructed. Piping systems made of SS-304 with the ability to use a maximum pressure of 10 bar with a diameter of % inch pipe to, from the calculation of minimal design that is 7.27 mm. If the tube SS-304 - ASTM B88 is the wall thickness of 0.083 inches. From this design it is indicated that the design is able to be fabricated and used for experimental study of heat transfer in single-phase and two-phase flows. (author)

  2. Extraction of vanillin using ionic-liquid-based aqueous two-phase systems

    OpenAIRE

    Cláudio, Ana Filipa M.; Freire, Mara G.; Freire, Carmen S. R.; Silvestre, Armando J. D.; Coutinho, João A. P.

    2010-01-01

    To explore proper extractive solvents and to design an optimized separation process it is highly imperative to understand the molecular-based phenomena governing the solutes partitioning. Moreover, the development of new techniques for the biomolecules separation and purification, while maintaining their functional characteristics unchanged, is still ongoing. Therefore, in this work, the partition coefficients of vanillin, a compound with well-known organoleptic properties, were determined us...

  3. Enzymatic synthesis of polyol esters in aqueous-organic two-phase systems.

    OpenAIRE

    Janssen, A.E.M.

    1993-01-01

    The last decade increasingly attention is paid to lipases as catalysts for synthesis of components, such as fatty acid-based surfactants, flavors, edible oil equivalents, monomers and polymers, and amides. In this thesis, the lipase-catalyzed esterification of polyols and fatty acids is described. These esters consist of a nonpolar part (fatty acid) and a polar part (polyol). Therefore, polyol esters have surface-active properties and are used as emulsifier in food, pharmaceutics; and cosmeti...

  4. Partitioning behavior of laccase from Lentinus polychrous Lev in aqueous two phase systems

    Directory of Open Access Journals (Sweden)

    Palapum Khunthongjan

    2012-02-01

    Full Text Available The water current has used as the energy resource for long time however its velocity is very low therefore there arenot found in wide range of uses. This study purposes accelerate water velocity by installing diffuser. The problems wereanalyzed by one dimension analysis and computational fluid dynamics (CFD; the domain covers the diffuser and turbinewhich substituted by porous jump condition is install inside. The flow was identified as axisymmetric steady flow, the inletboundary is identified as uniform flow, all simulation use the same size of diffuser, only the diffuser angles are vary. The resultsshow that velocities of water current in diffuser are increase when the diffuser angle are widen. The angle of diffuser is 20°,the velocity is increase to 1.96 times, compared to free stream velocity. If the angle was about 0-20° and 50-70° the forcetoward diffuser became high instantly; where as the force toward the rotor will be still and the maximum rate of diffuseraugmentation possibly was 3.62 and rotor power coefficient was 2.14.

  5. Slug flow transitions in horizontal gas/liquid two-phase flows. Dependence on channel height and system pressure for air/water and steam/water two-phase flows

    International Nuclear Information System (INIS)

    The slug flow transitions and related phenomena for horizontal two-phase flows were studied for a better prediction of two-phase flows that typically appear during the reactor loss-of-coolant accidents (LOCAs). For better representation of the flow conditions experimentally, two large-scaled facility: TPTF for high-pressure steam/water two-phase flows and large duct test facility for air/water two-phase flows, were used. The visual observation of the flow using a video-probe was performed in the TPTF experiments for good understanding of the phenomena. The currently-used models and correlations based mostly on the small-scale low-pressure experiments were reviewed and improved based on these experimental results. The modified Taitel-Dukler model for prediction of transition into slug flow from wavy flow and the modified Steen-Wallis correlation for prediction of onset of liquid entrainment from the interfacial waves were obtained. An empirical correlation for the gas-liquid interfacial friction factor was obtained further for prediction of liquid levels at wavy flow. The region of slug flow regime that is generally under influences of the channel height and system pressure was predicted well when these models and correlations were applied together. (author). 90 refs

  6. Stratified single- and two phase flows in horizontal tubes and tube-tank systems

    International Nuclear Information System (INIS)

    Serviceability of the accident heat removal system from containment shell of NPP is investigated. Results of experimenters with the model of the system are presented. Regimes of unstable operation of the heat removal system because of rise of hydraulic hammers and vibration of the equipment were detected. Reasons of these events were determined. It is noted that instability of the operation of the system is connected with infiltrate of relatively cold coolant from tank-cooler in overflow pipeline

  7. Primitive Liquid Water of the Solar System in an Aqueous Altered Carbonaceous Chondrite

    Science.gov (United States)

    Tsuchiyama, A.; Miyake, A.; Kitayama, A.; Matsuno, J.; Takeuchi, A.; Uesugi, K.; Suzuki, Y.; Nakano, T.; Zolensky, M. E.

    2016-01-01

    Non-destructive 3D observations of the aqueous altered CM chondrite Sutter's Mill using scanning imaging x-ray microscopy (SIXM) showed that some of calcite and enstatite grains contain two-phase inclusion, which is most probably composed of liquid water and bubbles. This water should be primitive water responsible for aqueous alteration in an asteroid in the early solar system.

  8. Reliability Analysis of a Boiling Two-phase Natural Circulation System using the APSRA methodology

    International Nuclear Information System (INIS)

    In this paper, we present a methodology known as APSRA (Assessment of Passive System ReliAbility) for evaluation of reliability of passive systems. The methodology has been applied to the boiling natural circulation system in the Main Heat Transport System of the Indian AHWR (Advanced Heavy Water Reactor) concept. In the APSRA methodology, the passive system reliability is evaluated from the evaluation of the failure probability of the system to carry out the desired function. The methodology first determines the operational characteristics of the system and the failure conditions by assigning a predetermined failure criterion. The failure surface is predicted using a best estimate code considering deviations of the operating parameters from their nominal states, which affect the natural circulation performance. Since applicability of the best estimate codes to passive systems are neither proven nor understood enough, APSRA relies more on experimental data for various aspects of natural circulation such as steady state natural circulation, flow instabilities, CHF (critical heat flux) under oscillatory condition, etc. APSRA proposes to compare the code predictions with the test data to generate the uncertainties on the failure parameter prediction, which is later considered in the code for accurate prediction of failure surface of the system. Once the failure surface of the system is predicted, the cause of failure is examined through root diagnosis, which occurs mainly due to failure of mechanical components. The failure probabilities of these components are evaluated through a classical PSA (Probabilistic Safety Assessment) treatment using the generic data. Reliability of the natural circulation system is evaluated from the probability of availability of the components for the success of natural circulation in the system. (author)

  9. Determination of Vitamin B6 by Fluorimetry after Aqueous Two-Phase Extraction Based on Ionic Liquid%离子液体双水相萃取荧光法测定维生素B6

    Institute of Scientific and Technical Information of China (English)

    谢秀娟; 张振新

    2011-01-01

    Based on the fact that water-miscible sol vent, such as ionic liquid, can be used to form aqueous two-phase system for extraction of analytes in the presence of salts, ionic liquid-salt system of ionic liquid( [Bmim]Br )and(NH4)2SO4 was developed for the determination of trace vitamin B6 coupled with fluorimetry after aqueous two-phase extraction. Factors that affect the extraction efficiencies of vitamin B6 including pH, the amount of extractant and extraction time were well studied. Under the optimal conditions, I. E. , λex/λem = 342/418 nm,pH = 8. 69, 1. 3 mL ionic liquid, 2. 8 g ammonium sulfate and 3 min of extraction, the extraction method presented a linear range of 1. 6×10-7~l. 04×10-5 g/L with a detection limit of 4. 8 × 10-7 g/L.%基于离子液体在盐的作用下能够形成双水相,用于目标物质的萃取,提出了离子液体-硫酸铵双水相萃取、荧光法测定痕量维生素B6的新方法.实验探讨了影响维生素B6萃取率的主要因素,如酸度、萃取剂的用量、时间等.在最适条件下,即λex/λem=342/418 nm,pH=8.69,离子液体和硫酸铵的用量分别为1.3mL、2.8g,萃取3 min时,体系测定维生素B6的线性范围为1.6×10-7~1.04×10-5 g/L,检出限为4.8×10-7 g/L.

  10. Investigations on hydrodynamic stability of two phase flow in a low pressure natural circulation system

    International Nuclear Information System (INIS)

    Appropriately scaled ''Loop Stability'' tests and ''Channel Stability'' tests were performed with single heated channel system and two parallel channel system separately at the Institute of Nuclear Energy Technology (INET) of the Tsinghua University in China. A broad range of several operational parameters such as heating power, system pressure, test inlet subcooling and resistance coefficient were investigated. It was found that under certain geometric conditions and operating parameters a self-sustaining, low frequency, even amplitude mass flow oscillation may be excited at very low steam qualities and subcooling conditions. Stability maps under different conditions have been provided to assist the design of the NHR. (author). 6 refs, 15 figs

  11. A Novel Flow Measurement System for Cryogenic Two-Phase Flow Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Flow rate measurements for cryogenic propellants are required for spacecraft and space exploration systems. Such a requirement has been hampered by lack of fast and...

  12. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume IV. Chapters 15-19)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  13. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume II. Chapters 6-10)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  14. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume III. Chapters 11-14)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  15. Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems (Volume I. Chapters 1-5)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, T.; Park, J.; Kojasoy, G.

    2003-03-15

    Experiments were performed on horizontal air-water bubbly two-phase flow, axial flow, stratified wavy flow, and annular flow. Theoretical studies were also undertaken on interfacial parameters for a horizontal two-phase flow.

  16. Model selection support expert system for numerical simulation of liquid-vapor two phase flow

    International Nuclear Information System (INIS)

    A model selection support expert system has been developed to accomplish the construction of suitable mathematical model consistent with the purpose and condition for a thermal-hydraulic calculation of nuclear power plants. This paper describes two extensions of the expert system: 1) estimation of outline of plant behavior at a target simulation case by the case-based reasoning, and 2) relaxation of incompleteness of knowledge base for model selection by domain knowledge. From the results of sample plant behavior estimations, the case-based reasoning is shown to be successfully applied. On the other hand, the relaxation by domain knowledge is considered to be inevitable for the usage of incomplete knowledge base, although this technique has not been implemented in the model selection support expert system yet. (author)

  17. Phase separation model analysis of gas-liquid two phase flow in the zones of influence in horizontal pipeline system

    International Nuclear Information System (INIS)

    A computational program is proposed to calculate the two-phase flow in the T type and Y type branch by using a mechanistic model based on the idea that the gas and liquid flows being extracted into the side branch come from the 'influence zones' bounded by 'dividing streamline'. A number of numerical calculations are carried out to give predictive results in good agreement with others' experiment work on this field. The calculation shows that the branch angle is one of the main factors effecting the phase separation in branch type systems. Meanwhile the influences of inlet parameter X1 are also discussed

  18. Quaternary (liquid + liquid) equilibria of aqueous two-phase polyethylene glycol, poly-N-vinylcaprolactam, and KH{sub 2}PO{sub 4}: Experimental and the generalized Flory-Huggins theory

    Energy Technology Data Exchange (ETDEWEB)

    Foroutan, Masumeh [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Enghelab Ave., Tehran 14155-6455 (Iran, Islamic Republic of)], E-mail: foroutan@khayam.ut.ac.ir; Zarrabi, Mona [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Enghelab Ave., Tehran 14155-6455 (Iran, Islamic Republic of)

    2008-06-15

    A quaternary (liquid + liquid) equilibrium study was performed to focus attention on the interaction parameters between poly-N-vinylcaprolactam (PVCL) and poly-ethylene glycol (PEG) as well as between other species. At first, the new experimental data of (liquid + liquid) equilibria for aqueous two-phase systems containing PEG, KH{sub 2}PO{sub 4}, and PVCL at T = 303.15 K have been determined. Then the Flory-Huggins theory with two electrostatic terms (the Debye-Huckel and the Pitzer-Debye-Huckel equations) has been generalized to correlate the phase behavior of the quaternary system. Good agreement has been found between experimental and calculated data from both models especially from the Pitzer-Debye-Huckel equation. Also an effort was done to compare the effect of temperature as well as addition of PVCL on the binodal curves of PEG, KH{sub 2}PO{sub 4}, and water. The effect of the type of salt on the binodals has been also studied, and the salting out power of the salts has been determined.

  19. Dynamic Performances in Sensorless System with Two-Phase Induction Motor

    Directory of Open Access Journals (Sweden)

    CRĂCIUNAŞ Gabriela

    2013-10-01

    Full Text Available In this paper is treated one of the most effective and widely used methods to obtain good dynamic performances for AC motor namely rotor flux direct field oriented control. A key role in achieving such adjustment is played by the rotor flux estimator. This on the one hand provides the absolute value which is used in the flux feedback control loop and on the other hand it gives the position of the rotor flux relative to the stator system. In the block diagram of the driving system with direct field oriented adjusting control there are used estimators derived directly from the machine equations. Using Matlab/Simulink simulation environment applied for a two-phaseinduction motor model, simulations were made for different imposed speeds and the characteristics of each estimator block diagram were highlighted.

  20. Contribution to the study of the depressurization of a two-phase flow system

    International Nuclear Information System (INIS)

    This study is set in the framework of PWR reactor safety. It concerns the accident due to the loss of coolant (LOCA) through the rupture of a main pipe of the primary system. This accident is called design basis accident. The first stage of the accident, depressurization of the system, is considered here. The experimental programme includes two series of tests: the first at 32 bars and the second at 150 bars of initial pressure. The measuring techniques (temperature and pressure) are described and, in particular, the determination of the void fraction by neutrons. From the theoretical angle, the model worked out to interpret the depressurization tests is a model that assumes a homogeneous mixture allowing a thermodynamic imbalance between phases

  1. Two-phase model of the basal ganglia: implications for discontinuous control of the motor system.

    Science.gov (United States)

    Lisman, John

    2014-11-01

    In this article, I point out that simple one-phase models of the role of the basal ganglia in action selection have a problem. Furthermore, I suggest a solution with major implications for the organization of the action-selection and motor systems. In current models, the striatum evaluates multiple potential actions by adding biases based on previous conditioning. These biases may arise in both the direct (bias for) and indirect (bias against) pathways. Together, these biases influence which action is ultimately chosen. For efficient conditioning to occur, a positive outcome must selectively strengthen the striatal bias for the chosen action (via a dopaminergic mechanism). This is problematic, however, because all potential action choices have influenced firing patterns in striatal cells during the selection process; it is therefore unclear how the synapses that represent the chosen plan could be selectively strengthened. I suggest a simple solution in which the striatum has two functional phases. In the first phase, the basal ganglia provide biases for multiple potential actions (using both the direct and indirect pathways), leading to the choice of a single action in the cortex. In the second phase, an efference copy of the chosen action is sent to the striatum, where it contributes to the establishment of the eligibility trace for that action. This trace, when acted on by subsequent dopaminergic reinforcement, leads to specific strengthening of the bias only for the chosen action. Consistent with this model, recordings show post-choice imposition onto the striatum of signals corresponding to the chosen action. The existence of dual phases of basal ganglia function implies that decisions about action choice are sent to the motor system in a discontinuous manner. This would not be problematic if the motor system also operated discontinuously. I will review evidence suggesting that this is the case, notably that action is organized by approximately 10 Hz

  2. Cascade effects on coalescence of segregation in two-phase systems

    International Nuclear Information System (INIS)

    The evolution of binary precipitations in ternary alloys has been theoretically investigated taking into account cascade fracture of precipitations. The equation for the growth of such particle rate is obtained. A set of equations for describing the behaviour of the precipitation ensemble is stated, analytical solutions for this system in different limiting cases at a late stage (coalescence stage) are obtained. It is shown that the function of second-phase particle distribution in size in the material considered trends to universal. The presence of cascade leads to displacement of region boundaries, where coalescence occurs. The theoretical results obtained allow to describe qualitatively a number of mechanisms of precipitation behaviour under radiation observed experimentally

  3. A computational study of two-phase viscoelastic systems in a capillary tube with a sudden contraction/expansion

    Science.gov (United States)

    Muradoglu, Metin; Izbassarov, Daulet

    2015-11-01

    Two-phase viscoelastic systems are computationally studied in a pressure-driven tube with a sudden contraction and expansion using a finite-difference/front-tracking method. The effects of viscoelasticity in drop and bulk fluids are investigated including high Weissenberg and Reynolds number cases up to Wi = 100 and Re = 100 . The FENE-CR model is used to account for the fluid viscoelasticity. Extensive computations are performed to examine drop dynamics for a wide range of parameters. It is found that viscoelasticity interacts with drop interface in a non-monotonic and complicated way, and the two-phase viscoelastic systems exhibit very rich dynamics especially in the expansion region. At high Re , the drop undergoes large deformation in the contraction region followed by shape oscillations in the downstream of the expansion. For a highly viscous drop, a re-entrant cavity develops in the contraction region at the trailing edge which, in certain cases, grows and eventually causes encapsulation of ambient fluid. The re-entrant cavity formation is initiated at the entrance of the contraction and is highly influenced by the viscoelasticity. The effects of viscoelasticity are reversed in the constricted channel: Viscoelasticity in drop/continuous phase hinders/enhances format The authors are grateful to the Scientific and Technical Research Council of Turkey (TUBITAK) for the support of this research through Grant 112M181 and Turkish Academy of Sciences (TUBA).

  4. Numerical Modeling on Two phase Fluid flow in a Coupled Fracture-Skin-Matrix System

    Science.gov (United States)

    Valsala Kumari, R.; G, S. K.

    2015-12-01

    Multiphase flow modeling studies below the ground surface is very essential for designing suitable remediation strategies for contaminated aquifers and for the development of petroleum and geothermal reservoirs. Presence of fractured bedrock beneath the ground surface will make multiphase flow process more complex due to its highly heterogeneous nature. A major challenge in modeling flow within a fractured rock is to capture the interaction between the high permeability fracture and the low permeability rock-matrix. In some instances, weathering and mineral depositions will lead to formation of an additional layer named fracture-skin at the fracture-matrix interface. Porosity and permeability of fracture-skin may significantly vary from the adjacent rock matrix and this variation will result in different flow and transport behavior within the fracture-skin. In the present study, an attempt has been made to model simultaneous flow of two immiscible phases (water and LNAPL) in a saturated coupled fracture-skin-matrix system. A fully-implicit finite difference model has been developed to simulate the variation of pressure and saturation of fluid phases along the fracture and within the rock-matrix. Sensitivity studies have been done to analyze the effect of change of various fracture-skin parameters such as porosity, diffusion coefficient and thickness on pressure and saturation distribution of both wetting and non-wetting fluid phases. It can be concluded from the study that the presence of fracture-skin is significantly affecting the fluid flow at the fracture-matrix interface and it can also be seen from the study that the flow behavior of both fluid phases is sensitive to fracture-skin parameters.

  5. Comparative performance and microbial community of single-phase and two-phase anaerobic systems co-digesting cassava pulp and pig manure

    DEFF Research Database (Denmark)

    Panichnumsin, P.; Ahring, B.K.; Nopharatana, A.;

    2010-01-01

    In this study, we illustrated the performance and microbial community of single- and two-phase systems anaerobically co-digesting cassava pulp and pig manure. The results showed that the volatile solid reduction and biogas productivity of two-phase CSTR were 66 ± 4% and 2000 ± 210 ml l-1 d-1, while...

  6. Porcine acute liver failure model established by two-phase surgery and treated with hollow fiber bioartificial liver support system

    Institute of Scientific and Technical Information of China (English)

    Yi Gao; Ning Mu; Xiao-Ping Xu; Yan Wang

    2005-01-01

    AIM: To establish a highly reproducible animal model of acute liver failure (ALF), for assessing theeffect of bioartificial liver support system (BALSS).METHODS: A two-phase complete liver devascularization procedure was performed in eight loco-hybrid pigs. Blood biochemical index and liver biopsy were studied every 2 h after surgery, and survival time was recorded. The BALSS constructed with high volume recirculating technique was a hollow fiber circulating system consisting of a hepatocyte reactor-hollow fiber module inoculated with microcarrieradhering hepatocytes, and a double pump, heparinized,thermostabilized, micro-capsulized activated carbonadsorbing plasmapheresis system. Twelve pigs undergoing two-phase surgery were randomized into: control group (perfused without hepatocytes, n = 6) and treatment group (perfused with hepatocytes, n = 6). Intergroup liver biochemical indexes, survival time, and liver pathological changes were analyzed at regular intervals.RESULTS: Two-phase surgery was performed in all the experimental pigs, and there was no obvious difference between their biochemical indexes. After 3 h of phase Ⅱ surgery, ammonia (Amm) increased to (269±37) μmol/L.After 5 h of the surgery, fibrinogen (Fib) decreased to (1.5±0.2) g/L. After 7 h of the surgery, ALT, AST, Tbil and PT were (7.6±1.8) nka/L, (40±5) nka/L, (55±8) μmol/L and (17.5±1.7) nka/L respectively. After 9 h of surgery, ALB and Cr were (27±4) g/L and (87±9) μmol/L. After 13 h of surgery, BUN was (3.5±0.9) μmol/L. All the above values were different from those determined before surgery.Survival time of pigs averaged 13.5±1.4 h. ALF pigs in the other group were treated with BALSS. The comparison analysis between the treated and control animals showed the changes of Tbil, PT, Alb, BUN, Cr, Fib, and Amm (P<0.01), but there was no change of ALT and AST. The survival time was statistically different (P<0.01), and there was no significant difference in histological changes

  7. Zirconium distribution between two phases: di-2-ethyl-hexyl phosphoric acid diluted in dodecane and aqueous phase of nitric acid

    International Nuclear Information System (INIS)

    Zirconium extraction by di-2-ethyl-hexyl phosphoric acid, from 0.5 to 10M nitric acid solutions is measured. The mechanism is independent of the acidity of the aqueous phase; a carbonic complex of zirconium nitrate is extracted. From a concentration 6M HNO3, an important extraction of nitric acid is noted. Consequences are brought out

  8. In-situ treatment of hydrocarbons contamination through enhanced bio-remediation and two phase extraction system

    Energy Technology Data Exchange (ETDEWEB)

    Aglietto, I.; Brunero Bronzin, M. [Studio Aglietto s.r.l., Torino (Italy)

    2005-07-01

    It happens frequently to find industrial site affected by contamination of subsoil and groundwater with consequent presence of free phase product floating on the water table. The remediation technologies in this case shall be properly selected and coordinated in a way that the interactions between each activities will help to decontaminate the site. The case study deals with an industrial site located near Turin, in Italy, of about 50 hectares of extension where has been found an area of about 4000 square meters with contamination of subsoil and groundwater. The compounds with higher concentrations are petroleum hydrocarbons found both in soil and in groundwater. Another big problem is represented by the presence of a layer of free product floating on the water table with a maximum measured thickness of 70 cm; this situation can be considered in fact one of the major difficulty in management of selected remediation technologies because the complete recover of the free phase is a priority for any kind of remediation system to apply subsequently. The present work is based upon the selection and implementation of a multiple treatment for definitive remediation of subsoil and groundwater. Free product recovery has been faced with a two-phase extraction technology, then for the remediation of subsoil we implemented a bio-venting system to improve biodegradation processes and finally for groundwater treatment we apply an enhanced in situ bio-remediation injecting oxygen release compounds directly into the aquifer. To reach these choices we have to pass through a complex activity of investigation of the site made up of more than 40 sampling point, 8 monitoring wells, about 140 analysis on subsoil samples and 10 on groundwater samples and one well used for an aquifer test. The preliminary design of the remediation system was therefore based on an extensive site characterization that included geological and geochemical, microbiological and hydrological data, together with

  9. In-situ treatment of hydrocarbons contamination through enhanced bio-remediation and two phase extraction system

    International Nuclear Information System (INIS)

    It happens frequently to find industrial site affected by contamination of subsoil and groundwater with consequent presence of free phase product floating on the water table. The remediation technologies in this case shall be properly selected and coordinated in a way that the interactions between each activities will help to decontaminate the site. The case study deals with an industrial site located near Turin, in Italy, of about 50 hectares of extension where has been found an area of about 4000 square meters with contamination of subsoil and groundwater. The compounds with higher concentrations are petroleum hydrocarbons found both in soil and in groundwater. Another big problem is represented by the presence of a layer of free product floating on the water table with a maximum measured thickness of 70 cm; this situation can be considered in fact one of the major difficulty in management of selected remediation technologies because the complete recover of the free phase is a priority for any kind of remediation system to apply subsequently. The present work is based upon the selection and implementation of a multiple treatment for definitive remediation of subsoil and groundwater. Free product recovery has been faced with a two-phase extraction technology, then for the remediation of subsoil we implemented a bio-venting system to improve biodegradation processes and finally for groundwater treatment we apply an enhanced in situ bio-remediation injecting oxygen release compounds directly into the aquifer. To reach these choices we have to pass through a complex activity of investigation of the site made up of more than 40 sampling point, 8 monitoring wells, about 140 analysis on subsoil samples and 10 on groundwater samples and one well used for an aquifer test. The preliminary design of the remediation system was therefore based on an extensive site characterization that included geological and geochemical, microbiological and hydrological data, together with

  10. Two-phase ozonation of chlorinated organics

    International Nuclear Information System (INIS)

    In the last few years the amount of research being conducted in the field of single-phase ozonation has grown extensively. However, traditional aqueous-phase ozonation systems are limited by a lack of selective oxidation potential, low ozone solubility in water, and slow intermediate decomposition rates. Furthermore, ozone may decompose before it can be utilized for pollutant destruction since ozone can be highly unstable in aqueous solutions. Naturally occurring compounds such as NaHCO3 also affect ozone reactions by inhibiting the formation of OH-free radicals. To compensate for these factors, excess ozone is typically supplied to a reactor. Since ozone generation requires considerable electric power consumption (16 - 24 kWh/kg of O3), attempts to enhance the ozone utilization rate and stability should lead to more efficient application of this process to hazardous waste treatment. To improve the process, ozonation may be more efficiently carried out in a two-phase system consisting of an inert solvent (saturated with O3) contacted with an aqueous phase containing pollutants. The non-aqueous phase must meet the following criteria: (1) non-toxic, (2) very low vapor pressure, (3) high density (for ease of separation), (4) complete insolubility in water, (5) reusability, (6) selective pollutant extractability, (7) high oxidant solubility, and (8) extended O3 stability. Previously published studies (1) have indicated that a number of fluorinated hydrocarbon compounds fit these criteria. For this project, FC40 (a product of 3M Co.) was chosen due to its low vapor pressure (3 mm Hg) and high specific gravity (1.9). The primary advantages of the FC40 solvent are that it is non-toxic, reusable, has an ozone solubility 10 times that of water, and that 85 % of the ozone remains in the solvent even after 2 hours. This novel two-phase process has been utilized to study the rapid destruction of organic chlorine compounds and organic mixtures

  11. Modeling and investigation of refrigeration system performance with two-phase fluid injection in a scroll compressor

    Science.gov (United States)

    Gu, Rui

    Vapor compression cycles are widely used in heating, refrigerating and air-conditioning. A slight performance improvement in the components of a vapor compression cycle, such as the compressor, can play a significant role in saving energy use. However, the complexity and cost of these improvements can block their application in the market. Modifying the conventional cycle configuration can offer a less complex and less costly alternative approach. Economizing is a common modification for improving the performance of the refrigeration cycle, resulting in decreasing the work required to compress the gas per unit mass. Traditionally, economizing requires multi-stage compressors, the cost of which has restrained the scope for practical implementation. Compressors with injection ports, which can be used to inject economized refrigerant during the compression process, introduce new possibilities for economization with less cost. This work focuses on computationally investigating a refrigeration system performance with two-phase fluid injection, developing a better understanding of the impact of injected refrigerant quality on refrigeration system performance as well as evaluating the potential COP improvement that injection provides based on refrigeration system performance provided by Copeland.

  12. An investigation into the flow behavior of a single phase gas system and a two phase gas/liquid system in normal gravity with nonuniform heating from above

    Science.gov (United States)

    Disimile, Peter J.; Heist, Timothy J.

    1990-01-01

    The fluid behavior in normal gravity of a single phase gas system and a two phase gas/liquid system in an enclosed circular cylinder heated suddenly and nonuniformly from above was investigated. Flow visualization was used to obtain qualitative data on both systems. The use of thermochromatic liquid crystal particles as liquid phase flow tracers was evaluated as a possible means of simultaneously gathering both flow pattern and temperature gradient data for the two phase system. The results of the flow visualization experiments performed on both systems can be used to gain a better understanding of the behavior of such systems in a reduced gravity environment and aid in the verification of a numerical model of the system.

  13. On modelling, mathematical analysis and numerical treatment of three-dimensional transient two-phase coolant flow in engineering systems

    International Nuclear Information System (INIS)

    The conservations equations of mass, momentum and enthalpy and the entropy inequality, written for a two-phase flow in the local instantaneous form together with the respective jump conditions at the phase interfaces, are volume-averaged over Eulerian control cells yielding a system of coupled macroscopic governing equations for the separated phases suitable for the three-dimensional, transient numerical simulation of complex engineering systems. The equations for the separated phases are then combined to model the fluid mixture in the frame of a slip model. The state of the art of the numerical treatment of the discretized and linearized equations is presented with reference to solution methods of a resulting Poisson-equation for pressure and enthalpy distributions. The above algorithms have been implemented in the computer programmes BACCHUS-3D/TP and COMMIX-2. The application of these codes is reviewed with reference to the numerical simulation of sodium boiling experiments in bundle geometry and of forced and natural convection simulations in more complex geometrical configurations. (author)

  14. Two phase sampling

    CERN Document Server

    Ahmad, Zahoor; Hanif, Muhammad

    2013-01-01

    The development of estimators of population parameters based on two-phase sampling schemes has seen a dramatic increase in the past decade. Various authors have developed estimators of population using either one or two auxiliary variables. The present volume is a comprehensive collection of estimators available in single and two phase sampling. The book covers estimators which utilize information on single, two and multiple auxiliary variables of both quantitative and qualitative nature. Th...

  15. A disturbance wave instability model for annular-to-intermittent flow transition in vertical two-phase flow system

    International Nuclear Information System (INIS)

    A model is developed to describe the transition from annular flow to intermittent flow in a vertical two-phase flow system. Since the instability of the disturbance wave, which is a dominant wave shape at the boundary between annular flow and intermittent flow, is considered as a governing mechanism, this instability described by the concept of hyperbolicity breaking in the characteristic equation is included in the model. The developed model is validated by comparing its predictions of gas superficial velocity for the transition with experimental data available in the literature, and comparing those with the predictions of the other correlations. The comparison results show that the model gives better predictions for the transition condition than existing correlations, and the effects of fluid properties, geometry and liquid flow rate on the transition are well considered by the developed model. The average of prediction errors is 3% for the present model. The standard deviation of the prediction errors of the model reaches 28%, which is the smallest among the models compared here. (author)

  16. Improvements in Neutronics/Thermal-Hydraulics Coupling in Two-Phase Flow Systems Using Stochastic-Mixture Transport Models

    CERN Document Server

    Palmer, T S

    2003-01-01

    In this NEER project, researchers from Oregon State University have investigated the limitations of the treatment of two-phase coolants as a homogeneous mixture in neutron transport calculations. Improved methods of calculating the neutron distribution in binary stochastic mixtures have been developed over the past 10-15 years and are readily available in the transport literature. These methods are computationally more expensive than the homogeneous (or atomic mix) models, but can give much more accurate estimates of ensemble average fluxes and reaction rates provided statistical descriptions of the distributions of the two materials are know. A thorough review of the two-phase flow literature has been completed and the relevant mixture distributions have been identified. Using these distributions, we have performed Monte Carlo criticality calculations of fuel assemblies to assess the accuracy of the atomic mix approximation when compared to a resolved treatment of the two-phase coolant. To understand the ben...

  17. 酒石酸钾钠双水相体系分离纯化C-藻蓝蛋白%Separation and purification of C-phycocyanin using aqueous two-phase extraction technique of potassium sodium tartrate

    Institute of Scientific and Technical Information of China (English)

    赵丽; 彭一良; 康天; 蔡伟民

    2015-01-01

    采用廉价的聚乙二醇(PEG)/酒石酸钾钠建立双水相体系,从干螺旋藻中分离纯化藻蓝蛋白C-PC。以纯度(目的蛋白在620 nm处的特征吸光值和总蛋白在280 nm处吸光值的比值)为指标,优化体系参数。研究结果表明,体系pH 8.06,系线长为21.65%、体积比为0.22的PEG1000和酒石酸钾钠双水相体系分离纯化效果最好,纯度由0.42提高到1.27,高于食品级纯度0.7,纯化因子3.04,回收率85.11%。硫酸铵盐析提高粗提液纯度后,二次双水相纯度达到3.28,高于药品级3.0。得到的 C-PC具有较高的生物活性。%This paper used commercial aqueous two-phase system (ATPS) to efficiently extract and purify C-PC from the dryspirulina platensis. The purity of C-PC was defined as the relation between of 620 and 280 nm ab-sorbance, which was as the target to optimize the system parameters. The optimal conditions were proved in poly-ethylene glycol (PEG) 1000 and potassium sodium tartrate, system pH of 8.06, the tie-line length (TLL) of 21.65% (w/w) and the volume ratio (Vr) of 0.22 to increase the purity from the initial purity of 0.42 to 1.27 after the first extraction. The purity was over the food grade 0.7 and the purification factor was 3.04. The recovery yield was 85.11%. The purity was achieved up 3.28 after the saturation of ammonium sulfate in the second ATPS extraction. It was more than the pharmaceutical grade 3.0.

  18. Enabling two-phase microfluidic thermal transport systems using a novel thermal-flux degassing and fluid charging approach

    International Nuclear Information System (INIS)

    A novel two-port thermal-flux method has been proposed and demonstrated for degassing and charging two-phase microfluidic thermal transport systems with a degassed working fluid. In microscale heat pipes and loop heat pipes (mLHPs), small device volumes and large capillary forces associated with smaller feature sizes render conventional vacuum pump-based degassing methods quite impractical. Instead, we employ a thermally generated pressure differential to purge non-condensable gases from these devices before charging them with a degassed working fluid in a two-step process. Based on the results of preliminary experiments studying the effectiveness and reliability of three different high temperature-compatible device packaging approaches, an optimized compression packaging technique was developed to degas and charge a mLHP device using the thermal-flux method. An induction heating-based noninvasive hermetic sealing approach for permanently sealing the degassed and charged mLHP devices has also been proposed. To demonstrate the efficacy of this approach, induction heating experiments were performed to noninvasively seal 1 mm square silicon fill-hole samples with donut-shaped solder preforms. The results show that the minimum hole sealing induction heating time is heat flux limited and can be estimated using a lumped capacitance thermal model. However, further continued heating of the solder uncovers the hole due to surface tension-induced contact line dynamics of the molten solder. It was found that an optimum mass of the solder preform is required to ensure a wide enough induction-heating time window for successful sealing of a fill-hole. (paper)

  19. Ultrasonic methodology measurement of two-phase (air-water) flows in cooling systems of nuclear reactor

    International Nuclear Information System (INIS)

    An ultrasonic methodology is proposed for the measurement for two phase (air-water) flow parameters. Ultrasonic backscattered signals were used to analyze the following parameters: average number of bubbles, interfacial area and void fraction. The results show a strong correlation between the parameters and the ultrasonic power signal obtained. (author)

  20. Investigation of a long term passive cooling system using two-phase thermosyphon loops for the nuclear reactor spent fuel pool

    International Nuclear Information System (INIS)

    Highlights: • A passive cooling system using two-phase thermosyphon for the spent fuel pool was proposed. • Effect of fill charge ratio on the two-phase thermosyphon loop performance was analyzed. • A thermo-hydraulic decoupling analysis method was introduced for the passive system. • Natural circulation of water in spent fuel pool was simulated and analyzed. - Abstract: Given postulated accidents that go beyond the plant design basis, long term passive cooling for the nuclear reactor spent fuel pool is important to demonstrate. Large amount of heat transport with small temperature difference is required. Two-phase thermosyphon loops are suitable for these cases. Flow and heat transfer characteristics of a two-phase thermosyphon loop were numerically investigated using RELAP5 code. Effects of fill charge ratio on the heat transfer were analyzed. The fill charge ratio should be chosen between 30% and 80%, smaller than 30% or larger than 80% will reduce the heat transfer. Based on the analysis of two-phase thermosyphon loops, a complete design of a passive cooling system for the spent fuel pool was proposed. An analysis method for decoupling of the thermo-hydraulics of the water natural circulation in spent fuel pool, two-phase flow of ammonia in thermosyphon loop and air natural circulation in cooling tower was presented. The results indicate that 1528 two-phase thermosyphon loops can passively remove 16 MW decay heat from the spent fuel pool successfully. Finally, the velocity and temperature distributions in the spent fuel pool were numerically simulated using ANSYS FLUENT software. It was proved that natural circulation of water in spent fuel pool can be realized with the present design. The temperature uniformity was fairly well and the maximum water temperature was 81 °C

  1. Proceedings of the CSNI Specialist Meeting on Transient Two-Phase Flow - Current Issues in System Thermal Hydraulics

    International Nuclear Information System (INIS)

    The 4. Specialists' Meeting on Transient Two Phase Flow was organized by the Safety Research Department of the French Nuclear Safety and Protection Institute at the request of the OECD Committee for the Safety of Nuclear Installations. After Toronto in 1976, Paris in 1978 and Pasadena in 1981, the Aix-en-Provence meeting was in keeping with the course of studies initiated by the Thermalhydraulic Systems Behavior Task Group of the Principal Working Group No.2 for discussing the achievements and defining the needs of safety research in accident thermal-hydraulics. 60 Specialists from 14 Countries (Belgium, Canada, Finland, France, Germany, Italy, Japan, the Netherlands, the United Kingdom, the USA, Spain, Sweden, Switzerland, Taiwan) attended the meeting, representing a large spectrum of experts from National Safety Authorities, Research Laboratories, Universities, Vendors and Utilities. These specialists had to review the 15-year research period which had elapsed since the last meetings. This period had been characterized by the issuance of the large thermalhydraulic computer codes for LWR accidents, the performance of several hundreds of separate effect tests for the development and the qualification of the physical models, the carrying-out of the large experimental programmes on system loops (up to scale 1) for verifying the computer codes. Although this research was mainly characterized by remarkable success, limitations still exist. In a safety approach, there need to be well identified and handled, and the specialists were asked to exchange their views in order to determine which solutions they expected to be affordable in the future. Safety applications have already started which use these latest research achievements. They raise specific problems such as the use of validation matrices, the evaluation of uncertainties, the identification and the control of unavoidable users' effects. The specialists were required to exchange their experience of applications

  2. Development of a Thermal Control System with Mechanically Pumped CO2 Two-Phase Loops for the AMS-02 Tracker on the ISS

    CERN Document Server

    Alberti, G; Ambrosi, G; Bardet, M; Battiston, R; Borsini, S; Cao, J F; Chen, Y; van Es, J; Gargiulo, C; Guo, K H; Guo, L; He, Z H; Huang, Z C; Koutsenko, V; Laudi, E; Lebedev, A; Lee, S C; Li, T X; Lin, Y L; Lv, S S; Menichelli, M; Miao, J Y; Mo, D C; Ni, J Q; Pauw, A; Qi, X M; Shue, G M; Sun, D J; Sun, X H; Tang, C P; Verlaat, B; Wang, Z X; Weng, Z L; Xiao, W J; Xu, N S; Yang, F K; Yeh, C C; Zhang, Z; Zwartbol, T

    2013-01-01

    To provide a stable thermal environment for the AMS-Tracker, a thermal control system based on mechanically pumped CO2 two-phase loops was developed. It has been operating reliably in space since May 19, 2011. In this article, we summarize the design, construction, tests, and performance of the AMS-Tracker thermal control system (AMS-TTCS).

  3. Well-Posedness and Qualitative Behaviour of Solutions for a Two-Phase Navier-Stokes-Mullins-Sekerka System

    OpenAIRE

    Abels, Helmut; Wilke, Mathias

    2011-01-01

    We consider a two-phase problem for two incompressible, viscous and immiscible fluids which are separated by a sharp interface. The problem arises as a sharp interface limit of a diffuse interface model. We present results on local existence of strong solutions and on the long-time behavior of solutions which start close to an equilibrium. To be precise, we show that as time tends to infinity, the velocity field converges to zero and the interface converges to a sphere at an exponential rate.

  4. Aqueous systems and geothermal energy

    International Nuclear Information System (INIS)

    Significant unpublished results reported include: osmotic coefficients of KCl solutions vs. molality at 109 to 2010C; cadmium ion diffusivities in CaCl2 hydrous melts; a x-ray diffraction study of the uranyl complex in water; solubility of amorphous silica in aqueous NaNO3 solutions at 100 to 3000C; and corrosion of carbon steel by geothermal brine

  5. Prediction of correlation between two-phase natural circulation flows in heated and unheated channels of a parallel channel system - based on electrical analogy

    International Nuclear Information System (INIS)

    A common characteristic of many industrial two-phase natural circulation systems is the presence of a large number of parallel boiling channels. Sensitivity of the steady state behavior of such a two-phase natural circulation system to different system parameters has many implications vis-a-vis performance of the system as per the design intent under various operating conditions. Experimental studies were carried out, to study the characteristics of a low pressure two-phase natural circulation system having ten transparent parallel channels with their individual heat sources. In view of its particular significance in nuclear industry, a special system condition with zero power in one of the parallel channels was also studied. The flow in the unheated channel and that in the heated channels were observed to be strongly interdependent in their sensitivity to downcomer resistance. A simple theory based on electrical analogy has been developed to predict the hydraulic behavior in such a system. Agreement between the theoretical predictions and the experimental observations has been found to be good. This article describes the experimentally observed phenomenon, the electrical analogy and the comparison between the experimental data and the analogical predictions. (orig.)

  6. Metal separations using aqueous biphasic partitioning systems

    International Nuclear Information System (INIS)

    Aqueous biphasic extraction (ABE) processes offer the potential for low-cost, highly selective separations. This countercurrent extraction technique involves selective partitioning of either dissolved solutes or ultrafine particulates between two immiscible aqueous phases. The extraction systems that the authors have studied are generated by combining an aqueous salt solution with an aqueous polymer solution. They have examined a wide range of applications for ABE, including the treatment of solid and liquid nuclear wastes, decontamination of soils, and processing of mineral ores. They have also conducted fundamental studies of solution microstructure using small angle neutron scattering (SANS). In this report they review the physicochemical fundamentals of aqueous biphase formation and discuss the development and scaleup of ABE processes for environmental remediation

  7. Ultra-violet wavelength shift for undoped CaF2 scintillation detector by two phase of liquid scintillator system in CANDLES

    International Nuclear Information System (INIS)

    CANDLES is a project to search for neutrinoless double beta decay of 48Ca with CaF2 scintillators. An effective 4π active shield is achieved by placing the CaF2 crystals in a liquid scintillator. Energy resolution is improved by converting the ultra-violet light of the CaF2 scintillator into the visible region with a wavelength shifter dissolved in the liquid scintillator. The newly developed technique, 'two phase system of liquid scintillator', is presented. It will be used to exploit the unique features of the CANDLES system. Experiments to determine liquid scintillator composition will be described. Performance of CANDLES will be demonstrated with prototype detectors. Obtained results indicate that the proposed two phase technique is effective for CANDLES system which will utilize several tons of CaF2 scintillators.

  8. Experimental facility with two-phase flow and with high concentration of non-condensable gases for research and development of emergency cooling system of advanced nuclear reactors

    International Nuclear Information System (INIS)

    The development of emergency cooling passive systems of advanced nuclear reactors requires the research of some relative processes to natural circulation, in two-phase flow conditions involving condensation processes in the presence of non-condensable gases. This work describes the main characteristics of the experimental facility called Bancada de Circulacao Natural (BCN), designed for natural circulation experiments in a system with a hot source, electric heater, a cold source, heat exchanger, operating with two-phase flow and with high concentration of noncondensable gas, air. The operational tests, the data acquisition system and the first experimental results in natural circulation are presented. The experiments are transitory in natural circulation considering power steps. The distribution of temperatures and the behavior of the flow and of the pressure are analyzed. The experimental facility, the instrumentation and the data acquisition system demonstrated to be adapted for the purposes of research of emergency cooling passive systems, operating with two-phase flow and with high concentration of noncondensable gases. (author)

  9. Measurement and simulation of the turbulent dispersion of a radioactive tracer in a two-phase flow system

    Energy Technology Data Exchange (ETDEWEB)

    Hensel, F.; Rohde, U.

    1998-10-01

    The turbulent dispersion of a radiotracer in an experimental setup with a natural convection liquid-gaseous flow was investigated. A liquid-gaseous bubbly flow was generated in a narrow tank by injection of pressurized air into water or by catalytic disintegration of H{sub 2}O{sub 2}. Turbulent Prandtl numbers for gas and tracer dispersion were varied. In the case of higher gas superficial velocities (J{sub gas}{approx}5-15 mm/s), a reasonable agreement was achieved between calculated and measured tracer transport velocity and dispersion coefficient values. A nearly linear correlation between j{sub gas} and D was found in agreement with other authors. The calculation results contribute to a better understanding of the phenomena and interpretation of the measurement results as well as to the validation of the CFD code for turbulent two-phase flow applications. Further investigations are necessary to improve the agreement in the cases of H{sub 2}O{sub 2} disintegration and low gas superficial velocities. (orig.)

  10. Development of a fast neutron imaging system for investigating two-phase flows in nuclear thermal–hydraulic phenomena: A status report

    International Nuclear Information System (INIS)

    Highlights: • Development of a novel fast neutron imaging system for two-phase flows in fuel bundles. • Novel D–D fusion neutron generator with small emitting spot for imaging. • Dedicated fast neutron imaging detector based on plastic scintillator and SiPM. • Novel proton recoil converter coupled with THGEM readout as imaging detector. - Abstract: The present paper gives an overview of the status of an ongoing project aiming at the development of a fast neutron imaging system for investigating two-phase flows primarily in the context of nuclear fuel bundle development. Other potential subjects for investigations include steam explosions for severe accident research and liquid metal two-phase flows for Gen IV reactor systems. The project is carried out in the form of a feasibility study that should enable estimation of the ultimate imaging capabilities achievable. The imaging system used in the feasibility study consists of a compact, deuterium–deuterium fusion based neutron generator and dedicated imaging detectors. For the latter two promising concepts are developed in parallel: one is based on an array of plastic scintillators coupled with silicon photomultipliers, the other on a special multi-foil recoil proton converter coupled to a position sensitive charge readout using a micro pattern gas detector

  11. Study on constant-pressure specific heat of non-equi- librium phase change process in gas-liquid two-phase flow system

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, the air-water vapor-water system is taken as an example, and the formula of constantpressure specific heat during non-equilibrium phase change process in the two-phase flow system is deduced using the theory of two-phase flow and thermophysics. The constant-pressure specific heat of non-equilibrium phase change process is calculated with the corresponding numerical model, and the numerical results are compared to those of the equilibrium phase change process. It is shown that in evaporation process, the variational rate of the non-equilibrium specific heat increases with increasing initial fluid temperature and particle mass fraction. The smaller particle radius is, the faster the variational rate is. Meanwhile, the constant-pressure specific heat of equilibrium process is higher than that of the non-equilibrium process all the time.

  12. 乙醇-硫酸铵双水相萃取镉-碘化钾-罗丹明B离子缔合物%Extraction of cadmium-potassium iodide-rhodamine B ion association complex by alcohol-ammonium sulfate aqueous two-phase

    Institute of Scientific and Technical Information of China (English)

    曾云; 覃事栋; 姚康康; 王影; 肖苗

    2012-01-01

    In the presence of ammonium sulphate, the extraction behavior of Cd (Ⅱ) based on potassium iodide-Rhodamine B-alcohol system was studied and the optimal condition of phase separation was selected. Results showed that in the pH1 ~3 media, the extraction rate of [CdI4]2- by alcohol-ammonium sulfate aqueous two-phase system is only 35.5% , and the ion association complex, which is formed by adding rhodamine B, can be extracted completely by the aqueous two-phase system. In the system, Cd2+ can be dissociated completely from Zn2+, Fe3+, Co2+, Cu2+, and Ni2+.%研究了在( NH4) 2SO4存在下,碘化钾-罗丹明B-乙醇体系萃取Cd(Ⅱ)的行为及最佳分相条件.实验表明,在pH 1~3时,乙醇-( NH4 )2SO4双水相体系对[ CdI4]2-络阴离子的萃取率只有35.5%;加入罗丹明B后,该体系能完全萃取镉-碘化钾-罗丹明B形成的离子缔合物,而干扰离子Zn2+、Fe3+、Co2+、Cu2+、Ni2+不被萃取,实现Cd2+与上述离子的分离.

  13. Dehalogenation of Polyhalogenated Compounds Dissolved in Organic Solvents with the Help AOPs in a Two-Phase Solvent-Water System Under Influence of Ultrasound

    Czech Academy of Sciences Publication Activity Database

    Kaštánek, František; Sobek, Jiří; Šolcová, Olga; Hájek, Milan

    -: -, 2010 - (Gidarakos, E.; Cossu, R.; Stegmann, R.), s. 229 ISBN N. [International Conference on Hazardous and Industrial Waste Management /2./. Chania, Crete (GR), 05.10.2010-08.10.2010] R&D Projects: GA ČR GD203/08/H032; GA AV ČR KAN100400701 Institutional research plan: CEZ:AV0Z40720504 Keywords : dehalogenation * two-phase system * fenton Subject RIV: CI - Industrial Chemistry, Chemical Engineering http://www.hwm1.tuc.gr/

  14. Experimental and CFD-PBM approach coupled with a simplified dynamic analysis of mass transfer in phenol biodegradation in a three phase system of an aerated two-phase partitioning bioreactor for environmental applications

    Science.gov (United States)

    Moradkhani, Hamed; Anarjan Kouchehbagh, Navideh; Izadkhah, Mir-Shahabeddin

    2016-07-01

    A three-dimensional transient modeling of a two-phase partitioning bioreactor, combining system hydrodynamics, two simultaneous mass transfer and microorganism growth is modeled using computational fluid dynamics code FLUENT 6.2. The simulation is based on standard "k-ɛ" Reynolds-averaged Navier-Stokes model. Population balance model is implemented in order to describe gas bubble coalescence, breakage and species transport in the reaction medium and to predict oxygen volumetric mass transfer coefficient (kLa). Model results are verified against experimental data and show good agreement as 13 classes of bubble size is taking into account. Flow behavior in different operational conditions is studied. Almost at all impeller speeds and aeration intensities there were acceptable distributions of species caused by proper mixing. The magnitude of dissolved oxygen percentage in aqueous phase has a direct correlation with impeller speed and any increasing of the aeration magnitude leads to faster saturation in shorter periods of time.

  15. Production of dry Lactobacillus rhamnosus GG preparations by spray drying and lyophilization in aqueous two-phase systems

    OpenAIRE

    Katarzyna Leja; Radosław Dembczyński; Wojciech Białas; Tomasz Jankowski

    2009-01-01

    Background. Drying is the oldest method of food preservation. It works by removing water from the food, which prevents the growth of microorganisms and decay. Moreover, spray or freeze drying is also used for the preservation of probiotic cultures. The aim of this study was to compare a survival rate of probiotic bacteria Lactobacillus rhamnosus during spray and freeze drying in ATPS. These results were also compared with survival rate of cells dried under the same conditions but suspended on...

  16. Study on interaction between iron ( Ⅲ ) and pepsin in ionic liquid aqueous two-phase%离子液体双水相中铁(Ⅲ)与胃蛋白酶作用研究

    Institute of Scientific and Technical Information of China (English)

    王玉峰; 陈琳琳; 邓凡政

    2011-01-01

    The interaction between Fe3+ and the pepsin was investigated by fluorescence and UV absorption spectroscopy in ionic liquid aqueous two-phase. The results showed that the interactions,which resulted in the fluorescence quenching of pepsin, belonged to a static quenching mechanism. And by calculation the binding constants were 2. 56 × 105 L/mol (300 K) and 8. 91 × 104 L/mol (310 K) ,and the binding sites were 1. 21 (300 K) and 1. 14 (310 K) . The thermodynamic parameters showed that the in teraction between Fe3+ and pepsin was mainly driven by electrostatic force. Synchronous fluorescence spectrum was used to investigate the conformational change of pepsin.%运用荧光光谱和紫外光谱,研究了在离子液体双水相体系中铁(Ⅲ)与胃蛋白酶的相互作用.结果表明,Fe3+对胃蛋白酶产生了荧光猝灭作用,且属于静态猝灭过程.计算得到在300 K和310 K下的结合常数分别为2.56×105L/mol和8.91×104 L/mol,结合位点数分别为1.21和1.14.热力学参数表明,Fe3与胃蛋白酶之间的相互作用力类型为静电作用.用同步荧光法探讨了Fe3+对胃蛋白酶构象的影响.

  17. Integrated extraction and purification of soy isoflavones by using aqueous micellar systems.

    Science.gov (United States)

    Cordisco, Estefanía; Haidar, Carla N; Coscueta, Ezequiel R; Nerli, Bibiana B; Malpiedi, Luciana P

    2016-12-15

    In this work, an integration of solid-liquid and liquid-liquid extractions by using aqueous micellar two-phase systems was evaluated as potential tool to purify soy isoflavones. Additionally, the proposed methodology aimed to preserve the protein content of the processed soy flour. The extractive assays were performed in AMTPS formed by Triton X-114 and sodium tartrate. In order to optimize the purification process, temperature and time were evaluated as independent variables. Under optimal working conditions, i.e. 100min and 33°C of incubation, IF were purified with a recovery percentage of 93 and a purification factor of almost 10. More importantly, the obtained sample presented an aglycone proportion superior to the reported by other methodologies. These results open perspectives to the use of aqueous micellar two-phase systems as an integrative methodology to extract, concentrate and purify isoflavones. PMID:27451211

  18. Interior Ballistics Two-Phase Reactive Flow Model Applied to Large Caliber Guided Projectile-Gun System

    OpenAIRE

    Mahmoud Rashad; XiaoBing Zhang; Hazem El Sadek

    2014-01-01

    Transient complex phenomena take place in a gun during interior ballistic cycle. Understanding these phenomena clearly and describing the mathematical models accurately are crucial to predict the behavior of gun system considering firing safety and performance. A mathematical model based on Eulerian-Eulerian approach for reactive gas-solid flow arising during interior ballistic cycle inside large caliber naval gun guided projectile system was developed. The model included the governing equati...

  19. Two-phase flow in the thermal water system of geothermal power plants; Zwei-Phasen-Stroemung im Thermalwassersystem von Geothermiekraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, Sebastian; Kather, Alfons [Technische Univ. Hamburg-Harburg (Germany). Inst. fuer Energietechnik

    2013-06-01

    As part of the project OSGa (Optimized power generation from highly saline thermal waters with high gas contents), the thermal water circuit of the geothermal power plant in Bruchsal is investigated. This site is characterized by a high salinity and an enhanced gas content of the thermal water. The contribution under consideration examines the flow patterns of a two-phase flow in a thermal water system in terms regarding to the influencing factors on the flow pattern and regarding to the plant engineering challenges.

  20. Determination of the archaeal and bacterial communities in two-phase and single-stage anaerobic systems by 454 pyrosequencing.

    Science.gov (United States)

    Maspolim, Yogananda; Zhou, Yan; Guo, Chenghong; Xiao, Keke; Ng, Wun Jern

    2015-10-01

    2-Phase anaerobic digestion (AD), where the acidogenic phase was operated at 2day hydraulic retention time (HRT) and the methanogenic phase at 10days HRT, had been evaluated to determine if it could provide higher organic reduction and methane production than the conventional single-stage AD (also operated at 12days HRT). 454 pyrosequencing was performed to determine and compare the microbial communities. The acidogenic reactor of the 2-phase system yielded a unique bacterial community of the lowest richness and diversity, while bacterial profiles of the methanogenic reactor closely followed the single-stage reactor. All reactors were predominated by hydrogenotrophic methanogens, mainly Methanolinea. Unusually, the acidogenic reactor contributed up to 24% of total methane production in the 2-phase system. This could be explained by the presence of Methanosarcina and Methanobrevibacter, and their activities could also help regulate reactor alkalinity during high loading conditions through carbon dioxide production. The enrichment of hydrolytic and acidogenic Porphyromonadaceae, Prevotellaceae, Ruminococcaceae and unclassified Bacteroidetes in the acidogenic reactor would have contributed to the improved sludge volatile solids degradation, and ultimately the overall 2-phase system's performance. Syntrophic acetogenic microorganisms were absent in the acidogenic reactor but present in the downstream methanogenic reactor, indicating the retention of various metabolic pathways also found in a single-stage system. The determination of key microorganisms further expands our understanding of the complex biological functions in AD process. PMID:26456614

  1. LITERATURE REVIEW: HEAT TRANSFER THROUGH TWO-PHASE INSULATION SYSTEMS CONSISTING OF POWDERS IN A CONTINUOUS GAS PHASE

    Science.gov (United States)

    The report, a review of the literature on heat flow through powders, was motivated by the use of fine powder systems to produce high thermal resistivities (thermal resistance per unit thickness). he term "superinsulations" has been used to describe this type of material, which ha...

  2. Development of computer program DYNAM/US for predicting thermally induced flow oscillations in two-phase flow systems

    International Nuclear Information System (INIS)

    An improved digital computer model DYNAM/US has been developed for predicting thermally induced instability in a once-through boiling flow with superheat. The present model includes newly developed dynamic schemes to calculate subcooled boiling, transition boiling, bulk boiling, as well as superheat. Numerical results revealed that this digital model compared well with existing experimental data and was able to predict lower natural frequencies as well as the system frequency response at higher frequencies

  3. Performance of a passive emergency heat removal system of advanced reactors in two-phase flow and with high concentration of non-condensable

    International Nuclear Information System (INIS)

    The research and the development of passive emergency cooling systems are necessary for the new generation of thermo-nuclear systems. Some basic information on the operation of these systems require the research of some relative processes to the natural circulation, mainly in conditions of two-phase flow involving processes of condensation in the presence of non-condensable gases, because many found situations are new. The experimental facility called Bancada de Circulacao Natural (BCN) was used for the realization of tests with diverse concentrations of non-condensable and power levels. The non-condensable gas present in the circuit decreases the rate of heat transfer for the secondary of the heat exchanger, determining low efficiency of the heat exchanger. High concentration of non-condensable in the vapor condensation, determines negative pressure, and cause the inversion of the flow in the circuit. The initial concentration of non-condensable and the geometry of the circuit, in the inlet of the heat exchanger, determines the establishment of transitory with two-phase flow. The BCN was performed with the computational code of Analysis of Accidents and Thermal-Hydraulics RELAP5/MOD 3.3 and, the calculated values had been compared with the experimental data, presenting good agreement for small non-condensable concentrations. The values calculated for high concentrations of non-condensable had been satisfactory after the circuit to have reached the temperature of saturation in the electric heater. (author)

  4. Thermal hydraulic analysis of two-phase closed thermosyphon cooling system for new cold neutron source moderator of Breazeale research reactor at Penn State

    Science.gov (United States)

    Habte, Melaku

    A cold neutron source cooling system is required for the Penn State's next generation cold neutron source facility that can accommodate a variable heat load up to about ˜10W with operating temperature of about 28K. An existing cold neutron source cooling system operating at the University of Texas Cold Neutron Source (TCNS) facility failed to accommodate heat loads upwards of 4W with the moderator temperature reaching a maximum of 44K, which is the critical temperature for the operating fluid neon. The cooling system that was used in the TCNS cooling system was a two-phase closed thermosyphon with a reservoir (TPCTR). The reservoir containing neon gas is kept at room temperature. In this study a detailed thermal analysis of the fundamental operating principles of a TPCTR were carried out. A detailed parametric study of the various geometric and thermo-physical factors that affect the limits of the operational capacity of the TPCTR investigated. A CFD analysis is carried out in order to further refine the heat transfer analysis and understand the flow structure inside the thermosyphon and the two-phase nucleate boiling in the evaporator section of the thermosyphon. In order to help the new design, a variety of ways of increasing the operating range and heat removal capacity of the TPCTR cooling system were analyzed so that it can accommodate the anticipated heat load of 10W or more. It is found, for example, that doubling the pressure of the system will increase the capacity index zeta by 50% for a system with an initial fill ratio FR of 1. A decrease in cryorefrigeration performance angle increases the capacity index. For example taking the current condition of the TCNS system and reducing the angle from the current value of ˜700 by half (˜350) will increase the cooling power 300%. Finally based on detailed analytic and CFD analysis the best operating condition were proposed.

  5. Electrochemically induced C-H functionalization using bromide ion/2,2,6,6-tetramethylpiperidinyl-N-oxyl dual redox catalysts in a two-phase electrolytic system

    International Nuclear Information System (INIS)

    Highlights: •Electrocatalytic C-H bond functionalization of tetrahydroisoquinolines is reported. •The transformation is mediated by a bromide ion/TEMPO dual redox catalyst system. •The transformation is conducted in a two-phase electrolytic medium. •The mechanism is proposed to proceed via a sequence of oxidation and addition reactions involving water as a nucleophile. •The procedure features wide substrate scope, the use of mild reaction conditions. -- Abstract: The electrochemical oxidative functionalization of benzylic C-H bonds, mediated by a dual bromide ion/2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO) redox catalyst system in a two-phase electrolytic medium, has been explored using cyclic voltammetry (CV) and preparative electrolysis techniques. The results show that electron transfer between TEMPO+ and a neutral substrate occurs with an efficiency that depends upon the presence of a base. The preparative scale electrolysis led to the formation of dihydro-isoquinolinones, isochromanone and xanthenone in moderate to excellent yields. On the basis of the CV analysis and preparative electrolysis results, a reaction mechanism is proposed

  6. Two-phase potential flow

    Science.gov (United States)

    Wallis, Graham B.

    1989-01-01

    Some features of two recent approaches of two-phase potential flow are presented. The first approach is based on a set of progressive examples that can be analyzed using common techniques, such as conservation laws, and taken together appear to lead in the direction of a general theory. The second approach is based on variational methods, a classical approach to conservative mechanical systems that has a respectable history of application to single phase flows. This latter approach, exemplified by several recent papers by Geurst, appears generally to be consistent with the former approach, at least in those cases for which it is possible to obtain comparable results. Each approach has a justifiable theoretical base and is self-consistent. Moreover, both approaches appear to give the right prediction for several well-defined situations.

  7. Magnetite Oxidation in Aqueous Systems

    OpenAIRE

    Templeton, John Andrew

    2008-01-01

    Magnetite, an iron oxide, is a possible candidate for in situ remediation of contaminated groundwater systems due to its oxidation/reduction potential for reduction of contaminants such as carbon tetrachloride. Little characterization and analysis has been done to describe the kinetics of magnetite transformation during oxidation. This work focuses on monitoring the concentrations of magnetite and one of its oxidation transformation products, maghemite, by the use of UV-Vis-NIR spectroscopy...

  8. An ECT System Based on Improved RBF Network and Adaptive Wavelet Image Enhancement for Solid/Gas Two-phase Flow

    Institute of Scientific and Technical Information of China (English)

    陈夏; 胡红利; 张娟; 周屈兰

    2012-01-01

    Electrical capacitance tomography(ECT) is a non-invasive imaging technique that aims at visualizing the cross-sectional permittivity distribution and phase distribution of solid/gas two-phase flow based on the measured capacitance.To solve the nonlinear and ill-posed inverse problem:image reconstruction of ECT system,this paper proposed a new image reconstruction method based on improved radial basis function(RBF) neural network combined with adaptive wavelet image enhancement.Firstly,an improved RBF network was applied to establish the mapping model between the reconstruction image pixels and the capacitance values measured.Then,for better image quality,adaptive wavelet image enhancement technique was emphatically analyzed and studied,which belongs to a space-frequency analysis method and is suitable for image feature-enhanced.Through multi-level wavelet decomposition,edge points of the image produced from RBF network can be determined based on the neighborhood property of each sub-band;noise distribution in the space-frequency domain can be estimated based on statistical characteristics;after that a self-adaptive edge enhancement gain can be constructed.Finally,the image is reconstructed with adjusting wavelet coefficients.In this paper,a 12-electrode ECT system and a pneumatic conveying platform were built up to verify this image reconstruction algorithm.Experimental results demonstrated that adaptive wavelet image enhancement technique effectively implemented edge detection and image enhancement,and the improved RBF network and adaptive wavelet image enhancement hybrid algorithm greatly improved the quality of reconstructed image of solid/gas two-phase flow [pulverized coal(PC)/air].

  9. Transferência de massa em sistemas de aeração por jatos bifásicos Mass transfer in two-phase jet aeration systems

    Directory of Open Access Journals (Sweden)

    Iran Eduardo Lima Neto

    2013-03-01

    Full Text Available A injeção de misturas de ar e água na forma de jatos bifásicos é bastante usada para a aeração artificial em tanques e corpos hídricos. No presente trabalho, foram realizados experimentos para investigar a transferência de massa induzida por estes jatos em um tanque de aeração. Os resultados forneceram eficiências de transferência de oxigênio padrão variando entre aproximadamente 5 e 9%. Combinando-se os dados obtidos nesta pesquisa com os disponíveis na literatura, foram geradas correlações adimensionais para o coeficiente de transferência de massa em função da fração volumétrica de ar e do número de Froude densimétrico. Finalmente, os resultados foram aplicados a situações práticas envolvendo sistemas de aeração por jatos bifásicos.The injection of air-water mixtures through two-phase jets is widely used for artificial aeration in tanks and water bodies. In this study, experiments were conducted to investigate mass transfer induced by such jets in an aeration tank. The results provided standard oxygen transfer efficiencies ranging from about 5 to 9%. Combining the results obtained here with those from previous investigations allowed to generate dimensionless correlations for the mass transfer coefficient as a function of the gas volume fraction and the densimetric Froude number. Finally, the results were applied to practical situations involving two-phase jet aeration systems.

  10. Two-phase flow model for energetic proton beam induced pressure waves in mercury target systems in the planned European Spallation Source

    International Nuclear Information System (INIS)

    Two-phase flow calculations are presented to investigate the thermo-hydraulic effects of the interaction between 2 ms long 1.3 GeV proton pulses with a closed mercury loop which can be considered as a model system of the target of the planned European Spallation Source (ESS) facility. The two-fluid model consists of six first-order partial differential equations that present one dimensional mass, momentum and energy balances for mercury vapor and liquid phases are capable to describe quick transients like cavitation effects or shock waves. The absorption of the proton beam is represented as instantaneous heat source in the energy balance equations. Densities and internal energies of the mercury liquid-vapor system is calculated from the van der Waals equation, but general method how to obtain such properties using arbitrary equation of state is also presented. A second order accurate high-resolution shock-capturing numerical scheme is applied with different kind of limiters in the numerical calculations. Our analysis shows that even 75 degree temperature heat shocks cannot cause considerable cavitation effects in mercury. (authors)

  11. Two-phase flow model for energetic proton beam induced pressure waves in mercury target systems in the planned European Spallation Source

    Energy Technology Data Exchange (ETDEWEB)

    Barna, I.F.; Imre, A.R. [KFKI Atomic Energy Research Institute (AEKI) of the Hungarian Academy of Sciences, Budapest (Hungary); Rosta, L.; Mezei, F. [Research Institute for Solid State Physics and Optics of the Hungarian Academy of Sciences, Budapest (Hungary)

    2008-12-15

    Two-phase flow calculations are presented to investigate the thermo-hydraulic effects of the interaction between 2 ms long 1.3 GeV proton pulses with a closed mercury loop which can be considered as a model system of the target of the planned European Spallation Source (ESS) facility. The two-fluid model consists of six first-order partial differential equations that present one dimensional mass, momentum and energy balances for mercury vapor and liquid phases are capable to describe quick transients like cavitation effects or shock waves. The absorption of the proton beam is represented as instantaneous heat source in the energy balance equations. Densities and internal energies of the mercury liquid-vapor system is calculated from the van der Waals equation, but general method how to obtain such properties using arbitrary equation of state is also presented. A second order accurate high-resolution shock-capturing numerical scheme is applied with different kind of limiters in the numerical calculations. Our analysis shows that even 75 degree temperature heat shocks cannot cause considerable cavitation effects in mercury. (authors)

  12. Validation and comparison of two-phase flow modeling capabilities of CFD, sub channel and system codes by means of post-test calculations of BFBT transient tests

    International Nuclear Information System (INIS)

    Highlights: • Simulation of BFBT turbine and pump transients at multiple scales. • CFD, sub-channel and system codes are used for the comparative study. • Heat transfer models are compared to identify difference between the code predictions. • All three scales predict results in good agreement to experiment. • Sub cooled boiling models are identified as field for future research. -- Abstract: The Institute for Neutron Physics and Reactor Technology (INR) at the Karlsruhe Institute of Technology (KIT) is involved in the validation and qualification of modern thermo hydraulic simulations tools at various scales. In the present paper, the prediction capabilities of four codes from three different scales – NEPTUNECFD as fine mesh computational fluid dynamics code, SUBCHANFLOW and COBRA-TF as sub channels codes and TRACE as system code – are assessed with respect to their two-phase flow modeling capabilities. The subject of the investigations is the well-known and widely used data base provided within the NUPEC BFBT benchmark related to BWRs. Void fraction measurements simulating a turbine and a re-circulation pump trip are provided at several axial levels of the bundle. The prediction capabilities of the codes for transient conditions with various combinations of boundary conditions are validated by comparing the code predictions with the experimental data. In addition, the physical models of the different codes are described and compared to each other in order to explain the different results and to identify areas for further improvements

  13. Two-Phase Flow Pressure Drop in Superhydrophobic Channels

    OpenAIRE

    Stevens, Kimberly; Crockett, Julie; Maynes, Daniel R.; Iverson, Brian C.

    2015-01-01

    Superhydrophobic surfaces promote dropwise condensation, which increases the rate of thermal transport, making them desirable for use in condensers. Adiabatic two-phase flow loops have been constructed to gain insight into the hydrodynamics of two-phase systems, laying the groundwork for further study of condensing flow on superhydrophobic surfaces. A two-phase flow loop to measure pressure drop and visualize the flow patterns of two-phase flow in superhydrophobic channels relative to classic...

  14. Laser diagnostics in two phase flows

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, S.

    2001-06-01

    The existence of a huge lack of experimental data from both technical and fundamental two phase flows was mentioned. The development of laser based non-intrusive measurement techniques to overcome this problem were the task of this work. An optical flow algorithm was adapted for the determination of the velocity fields of continuous and dispersed phase in flow systems. It was used as data reduction method for the newly developed gaseous imaging velocimetry (GIV) technique. The measurement technique including the data reduction has been validated by comparing it to the well-established particle image velocimetry (PIV). Its applicability on scalar data from 2D two-phase flows and reacting gaseous flows was demonstrated. Laser based measurement techniques concerning 3D two-phase flows have also been developed. Solutions for the measurement of the velocity field of the gaseous phase in between the droplets as well as of the liquid phase in an automotive DI spray have been given. (orig.)

  15. Enhanced thermionic emission properties in textured two-phase LaB{sub 6}–BaB{sub 6} system prepared by spark plasma sintering

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shen Lin, E-mail: shenlinz@sina.com [College of Mathematics and Physics, Jinggangshan University, Jian 343409 (China); Shanghai Key Laboratory of Special Artificial Microstructure and Pohl Institute of Solid State Physics and School of Physics Science and Engineering, Tongji University, Shanghai 200092 (China); State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing 100190 (China); Zhang, Jiu Xing, E-mail: zjiuxing@hfut.edu.cn [School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009 (China); Bao, Li Hong [Inner Mongolia Key Laboratory for Physics and Chemistry of Functional Materials, Inner Mongolia Normal University, Hohhot 010022 (China); Yu, Xiao Guang; Hu, Qiang Lin; Hu, Dong Qiang [College of Mathematics and Physics, Jinggangshan University, Jian 343409 (China)

    2014-10-25

    Graphical abstract: Room temperature XRD patterns of the nominal composition (La{sub 0.6}Ba{sub 0.4})B{sub 6} synthesized by SPS at 1400 °C for 5 min under 50 MPa. The XRD patterns reveal that the (La{sub 0.6}Ba{sub 0.4})B{sub 6} is a two-phase mixture of LaB{sub 6} and BaB{sub 6}. The inset is a macroscopic picture of the obtained (La{sub 0.6}Ba{sub 0.4})B{sub 6}. - Highlights: • (La{sub 0.6}Ba{sub 0.4})B{sub 6} has been successfully prepared by spark plasma sintering. • The obtained (La{sub 0.6}Ba{sub 0.4})B{sub 6} compound is a two-phase mixture of LaB{sub 6} and BaB{sub 6}. • The (0 0 1) texture is favorable for the decrease of work function. • The addition of BaB{sub 6} to LaB{sub 6} improves the electron emission performance. • (La{sub 0.6}Ba{sub 0.4})B{sub 6} is shown to be promising candidate for cathode applications. - Abstract: Structure, crystallographic orientation, and thermionic emission properties of the two-phase LaB{sub 6}–BaB{sub 6} system fabricated by a combined process of evaporation–condensation and spark plasma sintering (SPS) were investigated systematically. The powder X-ray diffraction (XRD) reveals that the obtained nominal composition (La{sub 0.6}Ba{sub 0.4})B{sub 6} compound exhibits coexistence of two isostructural phases of LaB{sub 6} and BaB{sub 6}. The electron backscatter diffraction (EBSD) confirms that the surface of the (La{sub 0.6}Ba{sub 0.4})B{sub 6} forms a clear (0 0 1) texture, which favors reduction in work function. Thermionic emission properties were measured in the temperature range between 1500 and 1873 K. The results indicated that the (La{sub 0.6}Ba{sub 0.4})B{sub 6} emitter displayed a low work function of 1.95 eV, and a high zero field emission current density of 10 A cm{sup −2} at 1773 K. Compared to the reported LaB{sub 6} and (La{sub 0.6}Sm{sub 0.4})B{sub 6} prepared for identical synthesis conditions, (La{sub 0.6}Ba{sub 0.4})B{sub 6} is shown to have the most excellent thermionic emission

  16. Remediation of PAH-contaminated soil at a gas manufacturing plant by a combined two-phase partition system washing and microbial degradation process.

    Science.gov (United States)

    Gong, Xuan; Xu, Xinyang; Gong, Zongqiang; Li, Xiaojun; Jia, Chunyun; Guo, Meixia; Li, Haibo

    2015-08-01

    The aim of this study was to design a remediation technique using both soil washing and microbial degradation to remove polycyclic aromatic hydrocarbons (PAHs) from contaminated soil. PAH biodegradation by inoculation of Mycobacterium sp. was first tested. The effectiveness of washing agents (Tween 80 solution, biodiesel, and a two-phase partition system (TPPS)) was then evaluated with column experiments. Third, the combination of TPPS washing and microbial degradation was studied. PAH bioavailability before and after biodegradation and the joint remediation was also assessed using hydroxypropyl-β-cyclodextrin (HPCD) extraction. Only phenanthrene and anthracene were noticeably biodegradable when the soil was inoculated with Mycobacterium sp. TPPS containing 2% (v/v) biodiesel and 2.5% (w/v) Tween 80 was used as the washing agent for the joint remediation test because it gave higher PAH extractions than Tween 80 solution with lower doses, and there was less residue in the soil. Joint TPPS washing and microbial degradation gave a total PAH removal of 92.6%, which was much higher than the results from either the biodegradation or washing experiments alone. Removals of all high molecular weight (HMW) PAHs were improved. Bioavailable concentrations of all PAHs decreased significantly after the joint remediation process, indicating that there were reduced risks from all PAHs. The results demonstrate that the combination of TPPS washing and microbial degradation is a useful and innovative process for remediation of PAH-contaminated soils. PMID:25874432

  17. Gas-liquid two-phase severe slugging in a pipeline-riser system with S-shaped flexible riser: Experiments and modeling

    Science.gov (United States)

    Li, Nailiang; Guo, Liejin; Li, Wensheng

    2013-07-01

    The objective of the present work is to investigate the air-water two-phase flow patterns in pipeline-riser system with an S-shaped flexible riser. The test loop with 50 mm ID consists of a horizontal pipeline with 114 m in length, a downward inclined section with 16 m in length, and an S-shaped flexible riser with 24 m in height when downward section inclined at -2° with respective to the horizontal. The inclination angle of the downward section varied from -2° to -5°. The liquid superficial velocity ranged from 0.03 to 1.5 m/s, and the gas superficial velocity from 0.4 to 6.0 m/s. Identification and characterization of flow regimes were attained by pressure at riser-base and liquid holdup at riser top. Severe slugging I, severe slugging II, transition flow and stable flows are observed to exist. Flow pattern maps for each declination are presented and the transition criteria are proposed. It's found that as higher liquid and gas velocity is required for the transition of the flow in the pipeline from stratified to intermittent with increasing the declination angle, severe slugging was observed to occur over a wilder range of flow conditions. The effect of riser geometry and separator pressure on the occurrence of the flow patterns was also examined. It shows that the S-bend tends to suppress the initiation of severe slugging.

  18. Reconstruction of electrical capacitance tomography images based on fast linearized alternating direction method of multipliers for two-phase flow system

    Institute of Scientific and Technical Information of China (English)

    Chongkun Xia; Chengli Su⁎; Jiangtao Cao; Ping Li

    2016-01-01

    Electrical capacitance tomography (ECT) has been applied to two-phase flow measurement in recent years. Image reconstruction algorithms play an important role in the successful applications of ECT. To solve the il-posed and nonlinear inverse problem of ECT image reconstruction, a new ECT image reconstruction method based on fast lin-earized alternating direction method of multipliers (FLADMM) is proposed in this paper. On the basis of theoretical analysis of compressed sensing (CS), the data acquisition of ECT is regarded as a linear measurement process of permittivity distribution signal of pipe section. A new measurement matrix is designed and L1 regularization method is used to convert ECT inverse problem to a convex relaxation problem which contains prior knowledge. A new fast alternating direction method of multipliers which contained linearized idea is employed to minimize the objective function. Simulation data and experimental results indicate that compared with other methods, the quality and speed of reconstructed images are markedly improved. Also, the dynamic experimental results in-dicate that the proposed algorithm can fulfil the real-time requirement of ECT systems in the application.

  19. Mechanistic analysis of solute transport in an in vitro physiological two-phase dissolution apparatus.

    Science.gov (United States)

    Mudie, Deanna M; Shi, Yi; Ping, Haili; Gao, Ping; Amidon, Gordon L; Amidon, Gregory E

    2012-10-01

    In vitro dissolution methodologies that adequately capture the oral bioperformance of solid dosage forms are critical tools needed to aid formulation development. Such methodologies must encompass important physiological parameters and be designed with drug properties in mind. Two-phase dissolution apparatuses, which contain an aqueous phase in which the drug dissolves (representing the dissolution/solubility component) and an organic phase into which the drug partitions (representing the absorption component), have the potential to provide meaningful predictions of in vivo oral bioperformance for some BCS II, and possibly some BCS IV drug products. Before such an apparatus can be evaluated properly, it is important to understand the kinetics of drug substance partitioning from the aqueous to the organic medium. A mass transport analysis was performed of the kinetics of partitioning of drug substance solutions from the aqueous to the organic phase of a two-phase dissolution apparatus. Major assumptions include pseudo-steady-state conditions, a dilute aqueous solution and diffusion-controlled transport. Input parameters can be measured or estimated a priori. This paper presents the theory and derivation of our analysis, compares it with a recent kinetic approach, and demonstrates its effectiveness in predicting in vitro partitioning profiles of three BCS II weak acids in four different in vitro two-phase dissolution apparatuses. Very importantly, the paper discusses how a two-phase apparatus can be scaled to reflect in vivo absorption kinetics and for which drug substances the two-phase dissolution systems may be appropriate tools for measuring oral bioperformance. PMID:22847296

  20. Mechanistic analysis of solute transport in an in vitro physiological two-phase dissolution apparatus

    Science.gov (United States)

    Mudie, Deanna M.; Shi, Yi; Ping, Haili; Gao, Ping; Amidon, Gordon L.; Amidon, Gregory E.

    2015-01-01

    In vitro dissolution methodologies that adequately capture the oral bioperformance of solid dosage forms are critical tools needed to aid formulation development. Such methodologies must encompass important physiological parameters and be designed with drug properties in mind. Two-phase dissolution apparatuses, which contain an aqueous phase in which the drug dissolves (representing the dissolution/solubility component) and an organic phase into which the drug partitions (representing the absorption component), have the potential to provide meaningful predictions of in vivo oral bioperformance for some BCS II, and possibly some BCS IV drug products. Before such an apparatus can be evaluated properly, it is important to understand the kinetics of drug substance partitioning from the aqueous to the organic medium. A mass transport analysis was performed of the kinetics of partitioning of drug substance solutions from the aqueous to the organic phase of a two-phase dissolution apparatus. Major assumptions include pseudo-steady-state conditions, a dilute aqueous solution and diffusion-controlled transport. Input parameters can be measured or estimated a priori. This paper presents the theory and derivation of our analysis, compares it with a recent kinetic approach, and demonstrates its effectiveness in predicting in vitro partitioning profiles of three BCS II weak acids in four different in vitro two-phase dissolution apparatuses. Very importantly, the paper discusses how a two-phase apparatus can be scaled to reflect in vivo absorption kinetics and for which drug substances the two-phase dissolution systems may be appropriate tools for measuring oral bioperformance. PMID:22847296

  1. Coupling two-phase fluid flow with two-phase darcy flow in anisotropic porous media

    KAUST Repository

    Chen, J.

    2014-06-03

    This paper reports a numerical study of coupling two-phase fluid flow in a free fluid region with two-phase Darcy flow in a homogeneous and anisotropic porous medium region. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the anisotropic porous medium region. A Robin-Robin domain decomposition method is used for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Obtained results have shown the anisotropic properties effect on the velocity and pressure of the two-phase flow. 2014 Jie Chen et al.

  2. A finite element code for modelling tracer transport in a non-isothermal two-phase flow system for CO2 geological storage characterization

    Science.gov (United States)

    Tong, F.; Niemi, A. P.; Yang, Z.; Fagerlund, F.; Licha, T.; Sauter, M.

    2011-12-01

    This paper presents a new finite element method (FEM) code for modeling tracer transport in a non-isothermal two-phase flow system. The main intended application is simulation of the movement of so-called novel tracers for the purpose of characterization of geologically stored CO2 and its phase partitioning and migration in deep saline formations. The governing equations are based on the conservation of mass and energy. Among the phenomena accounted for are liquid-phase flow, gas flow, heat transport and the movement of the novel tracers. The movement of tracers includes diffusion and the advection associated with the gas and liquid flow. The temperature, gas pressure, suction, concentration of tracer in liquid phase and concentration of tracer in gas phase are chosen as the five primary variables. Parameters such as the density, viscosity, thermal expansion coefficient are expressed in terms of the primary variables. The governing equations are discretized in space using the Galerkin finite element formulation, and are discretized in time by one-dimensional finite difference scheme. This leads to an ill-conditioned FEM equation that has many small entries along the diagonal of the non-symmetric coefficient matrix. In order to deal with the problem of non-symmetric ill-conditioned matrix equation, special techniques are introduced . Firstly, only nonzero elements of the matrix need to be stored. Secondly, it is avoided to directly solve the whole large matrix. Thirdly, a strategy has been used to keep the diversity of solution methods in the calculation process. Additionally, an efficient adaptive mesh technique is included in the code in order to track the wetting front. The code has been validated against several classical analytical solutions, and will be applied for simulating the CO2 injection experiment to be carried out at the Heletz site, Israel, as part of the EU FP7 project MUSTANG.

  3. Enhanced biotransformation of 2-phenylethanol with ethanol oxidation in a solid-liquid two-phase system by active dry yeast.

    Science.gov (United States)

    Rong, Shaofeng; Ding, Baomei; Zhang, Xiaoli; Zheng, Xuesong; Wang, Yifei

    2011-11-01

    2-Phenylethanol (2-PE) can be produced from L: -phenylalanine (L: -Phe) with the oxidation degradation of ethanol by active dry yeast. In this study, the catalysis effect of ethanol on biotransforming L: -Phe into 2-PE by yeast was evaluated and optimized. The results indicated that increasing ethanol concentration was beneficial for enhancing 2-PE concentration but lowered the 2-PE productivity. Initial ethanol concentration above 25 g/l could strongly inhibit the 2-PE production. To obtain 2-PE with desirable concentrations with an economical operation mode, three fed-batch biotransformation operation methods using ethanol or/and glucose were carried out in a solid-liquid two-phase system. When using ethanol alone with the initial concentration of 10 g/l, the total concentration and overall productivity of 2-PE were 7.6 g/l and 0.065 g l(-1) h(-1), respectively. Furthermore, an experiment with controlled glucose solely (higher than 2 g/l) was finished. In this case, phenylacetaldehyde (PA) was detected along with ethanol accumulation, suggesting that reaction of PA → 2-PE in Ehrlich pathway was inhibited. To further enhance 2-PE production by using glucose only, a novel operation strategy to simultaneously control rates of glucose glycolysis and ethanol oxidative degradation with the aid of ISPR techniques was developed. With this strategy, 2-PE concentration and yield based on glucose consumption reached a higher level of 14.8 g/l and 0.12 g-PE/g-glucose, respectively, and these are the highest values reported up to date with the fed-batch biotransformation operation mode. PMID:21910022

  4. Non-linear dynamics of a two phase flow system in an evaporator: The effects of (i) a time varying pressure drop (ii) an axially varying heat flux

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, S.; Srinivas, B.; Pushpavanam, S. [Indian Inst. of Tech., Kanpur (India). Dept. of Chemical Engineering; Murty Bhallamudi, S. [Department of Civil Engineering, Indian Institute of Technology, Kanpur-208016 (India)

    1997-12-01

    In this paper we study the phenomena of density wave oscillations (DWO) in a vertical heated channel. The homogeneous equilibrium model is used to simulate the flow in the two-phase region. The equations are solved numerically using a `shooting-method` technique. This in its turn employs an implicit backward finite difference scheme. The scheme can incorporate the movement of the interface. It is very elegant and does not involve storage of variables in large N x N matrices. This scheme is sufficiently general and can be used to simulate the dynamic behaviour when: (i) the heat flux imposed at the surface is non-constant, i.e. exhibits an axial variation; and (ii) the imposed pressure drop is varied periodically at a fixed frequency. A possible explanation for the conflicting reports of the effect of a periodic variation in heat flux is provided using a linear stability analysis and the D-partition method. The interaction of the natural frequency of the DWO and the fixed forcing frequency of the imposed pressure drop gives rise to various phenomena viz relaxation oscillations, sub-harmonic oscillations, quasi-periodic and chaotic solutions. To aid the experimentalist describe this infinite-dimensional system on the basis of his experimental results we discuss the characterisation using only the velocity time series data. This is done employing the method of delay coordinate embedding. The phase portraits, stroboscopic map and correlation dimension of the actual attractor are compared with that of the reconstructed attractor from the velocity time series. (orig.) 19 refs.

  5. Non-linear dynamics of a two phase flow system in an evaporator: The effects of (i) a time varying pressure drop (ii) an axially varying heat flux

    International Nuclear Information System (INIS)

    In this paper we study the phenomena of density wave oscillations (DWO) in a vertical heated channel. The homogeneous equilibrium model is used to simulate the flow in the two-phase region. The equations are solved numerically using a 'shooting-method' technique. This in its turn employs an implicit backward finite difference scheme. The scheme can incorporate the movement of the interface. It is very elegant and does not involve storage of variables in large N x N matrices. This scheme is sufficiently general and can be used to simulate the dynamic behaviour when: (i) the heat flux imposed at the surface is non-constant, i.e. exhibits an axial variation; and (ii) the imposed pressure drop is varied periodically at a fixed frequency. A possible explanation for the conflicting reports of the effect of a periodic variation in heat flux is provided using a linear stability analysis and the D-partition method. The interaction of the natural frequency of the DWO and the fixed forcing frequency of the imposed pressure drop gives rise to various phenomena viz relaxation oscillations, sub-harmonic oscillations, quasi-periodic and chaotic solutions. To aid the experimentalist describe this infinite-dimensional system on the basis of his experimental results we discuss the characterisation using only the velocity time series data. This is done employing the method of delay coordinate embedding. The phase portraits, stroboscopic map and correlation dimension of the actual attractor are compared with that of the reconstructed attractor from the velocity time series. (orig.)

  6. Advanced Aqueous Separation Systems for Actinide Partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Ken [Washington State Univ., Pullman, WA (United States); Martin, Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lumetta, Gregg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-02

    One of the most challenging aspects of advanced processing of used nuclear fuel is the separation of transplutonium actinides from fission product lanthanides. This separation is essential if actinide transmutation options are to be pursued in advanced fuel cycles, as lanthanides compete with actinides for neutrons in both thermal and fast reactors, thus limiting efficiency. The separation is difficult because the chemistry of Am3+ and Cm3+ is nearly identical to that of the trivalent lanthanides (Ln3+). The prior literature teaches that two approaches offer the greatest probability of devising a successful group separation process based on aqueous processes: 1) the application of complexing agents containing ligand donor atoms that are softer than oxygen (N, S, Cl-) or 2) changing the oxidation state of Am to the IV, V, or VI state to increase the essential differences between Am and lanthanide chemistry (an approach utilized in the PUREX process to selectively remove Pu4+ and UO22+ from fission products). The latter approach offers the additional benefit of enabling a separation of Am from Cm, as Cm(III) is resistant to oxidation and so can easily be made to follow the lanthanides. The fundamental limitations of these approaches are that 1) the soft(er) donor atoms that interact more strongly with actinide cations than lanthanides form substantially weaker bonds than oxygen atoms, thus necessitating modification of extraction conditions for adequate phase transfer efficiency, 2) soft donor reagents have been seen to suffer slow phase transfer kinetics and hydro-/radiolytic stability limitations and 3) the upper oxidation states of Am are all moderately strong oxidants, hence of only transient stability in media representative of conventional aqueous separations systems. There are examples in the literature of both approaches having been described. However, it is not clear at present that any extant process is sufficiently robust for application at the scale

  7. Interfacial Thermodynamics of Coexisting Aqueous Polymer Solutions

    OpenAIRE

    Vis, M

    2015-01-01

    Phase separation is commonly observed when two different polymers are present in aqueous solution, forming aqueous two-phase systems which typically consist for 90% of water. It is demonstrated that the presence of charge on one of the polymers results in an electric potential difference between the two phases. Upon phase separation, the polyelectrolyte is confined in majority to one of the phases. Although small ions can equilibrate freely between the phases, the restriction of macroscopic c...

  8. Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

    Energy Technology Data Exchange (ETDEWEB)

    Zboray, Robert [Paul Scherrer Institute, PSI Villigen 5232 (Switzerland); Dangendorf, Volker; Bromberger, Benjamin; Tittelmeier, Kai [Physikalisch-Technische Bundesanstalt (PTB), Braunschweig 38116 (Germany); Mor, Ilan [Soreq NRC, Yavne 81800 (Israel)

    2015-07-15

    In a previous work, we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify the detector and optimize it for the given application, which is described in the present work. Furthermore, we managed to improve the image post-processing methodology and the noise suppression. Using the tailored detector and the improved post-processing, significant increase in the image quality and an order of magnitude lower exposure times, down to 3.33 ms, have been achieved with minimized motion artifacts. Similar to the previous study, different two-phase flow regimes such as bubbly slug and churn flows have been examined. The enhanced imaging quality enables an improved prediction of two-phase flow parameters like the instantaneous volumetric gas fraction, bubble size, and bubble velocities. Instantaneous velocity fields around the gas enclosures can also be more robustly predicted using optical flow methods as previously.

  9. Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

    Science.gov (United States)

    Zboray, Robert; Dangendorf, Volker; Mor, Ilan; Bromberger, Benjamin; Tittelmeier, Kai

    2015-07-01

    In a previous work, we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify the detector and optimize it for the given application, which is described in the present work. Furthermore, we managed to improve the image post-processing methodology and the noise suppression. Using the tailored detector and the improved post-processing, significant increase in the image quality and an order of magnitude lower exposure times, down to 3.33 ms, have been achieved with minimized motion artifacts. Similar to the previous study, different two-phase flow regimes such as bubbly slug and churn flows have been examined. The enhanced imaging quality enables an improved prediction of two-phase flow parameters like the instantaneous volumetric gas fraction, bubble size, and bubble velocities. Instantaneous velocity fields around the gas enclosures can also be more robustly predicted using optical flow methods as previously.

  10. Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

    International Nuclear Information System (INIS)

    In a previous work, we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify the detector and optimize it for the given application, which is described in the present work. Furthermore, we managed to improve the image post-processing methodology and the noise suppression. Using the tailored detector and the improved post-processing, significant increase in the image quality and an order of magnitude lower exposure times, down to 3.33 ms, have been achieved with minimized motion artifacts. Similar to the previous study, different two-phase flow regimes such as bubbly slug and churn flows have been examined. The enhanced imaging quality enables an improved prediction of two-phase flow parameters like the instantaneous volumetric gas fraction, bubble size, and bubble velocities. Instantaneous velocity fields around the gas enclosures can also be more robustly predicted using optical flow methods as previously

  11. Horseradish peroxidase/catalase-mediated cell-laden alginate-based hydrogel tube production in two-phase coaxial flow of aqueous solutions for filament-like tissues fabrication

    International Nuclear Information System (INIS)

    We report a method for preparing cell-laden hydrogel tubes. This method uses a coaxial double-orifice spinneret, simpler than triple-orifice spinnerets which have been used for preparing similar constructs. The intended application was to create a template for preparing filament-like structures composed of two heterogeneous living cell layers. An aqueous solution containing an alginate derivative possessing phenolic hydroxyl moieties (Alg-Ph), catalase and horseradish peroxidase (HRP) was extruded into an ambient flow of H2O2 aqueous solution. This operation enabled the Alg-Ph solution to be gellable through a HRP-catalyzed reaction, cross-linking the Ph moieties together. By altering flow rates of the Alg-Ph and H2O2 solutions along with the concentrations of catalase and H2O2, the diameter and membrane thickness of the hydrogel tubes were controllable between 250–550 µm and 70–140 µm, respectively. The viability of the HeLa cells enclosed in the hydrogel tubes with a diameter of 300 µm and a membrane thickness of 80 µm was 95.4%. Subsequently, the enclosed HeLa cells grew and filled the hollow core. A filament-like structure of HeLa cells covered with a layer of fibroblast 10T1/2 cells was obtained when confluency of fibroblast 10T1/2 cells was reached and the hydrogel matrix was degraded with alginate lyase. (paper)

  12. Two-Phase Galaxy Formation

    CERN Document Server

    Cook, M; Granato, G L

    2009-01-01

    We propose and test a scenario for the assembly and evolution of luminous matter in galaxies which substantially differs from that adopted by other semianalytic models. As for the dark matter (DM), we follow the detailed evolution of halos within the canonical LCDM cosmology using standard Montecarlo methods. However, when overlaying prescriptions for baryon evolution, we take into account an effect pointed out in the past few years by a number of studies mostly based on intensive N-body simulations, namely that typical halo growth occurs in two phases: an early, fast collapse phase featuring several major merger events, followed by a late, quiescent accretion onto the halo outskirts. We propose that the two modes of halo growth drive two distinct modes for the evolution of baryonic matter, favoring the development of the spheroidal and disc components of galaxies, respectively. We test this idea using the semianalytic technique. Our galaxy formation model envisages an early coevolution of spheroids and the c...

  13. Two-phase viscoelastic jetting

    Energy Technology Data Exchange (ETDEWEB)

    Yu, J-D; Sakai, S.; Sethian, J.A.

    2008-12-10

    A coupled finite difference algorithm on rectangular grids is developed for viscoelastic ink ejection simulations. The ink is modeled by the Oldroyd-B viscoelastic fluid model. The coupled algorithm seamlessly incorporates several things: (1) a coupled level set-projection method for incompressible immiscible two-phase fluid flows; (2) a higher-order Godunov type algorithm for the convection terms in the momentum and level set equations; (3) a simple first-order upwind algorithm for the convection term in the viscoelastic stress equations; (4) central difference approximations for viscosity, surface tension, and upper-convected derivative terms; and (5) an equivalent circuit model to calculate the inflow pressure (or flow rate) from dynamic voltage.

  14. Review of two-phase water hammer

    International Nuclear Information System (INIS)

    In a thermalhydraulic system like a nuclear power plant, where steam and water mix and are used to transport large amounts of energy, there is a potential to create two-phase water hammer. Large water hammer pressure transients are a threat to piping integrity and represent an important safety concern. Such events may cause unscheduled plant down time. The objective of this review is to provide a summary of the information on two-phase water hammer available in the open literature with particular emphasis on water hammer occurrences in nuclear power plants. Past reviews concentrated on studies concerned with preventing water hammer. The present review focuses on the fundamental experimental, analytical, and modelling studies. The papers discussed here were chosen from searches covering up to July 1993. (author)

  15. Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

    OpenAIRE

    Zboray, Robert; Dangendorf, Volker; Mor, Ilan; Bromberger, Benjamin; Tittelmeier, Kai

    2015-01-01

    In a previous work we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify ...

  16. Results of the Workshop on Two-Phase Flow, Fluid Stability and Dynamics: Issues in Power, Propulsion, and Advanced Life Support Systems

    Science.gov (United States)

    McQuillen, John; Rame, Enrique; Kassemi, Mohammad; Singh, Bhim; Motil, Brian

    2003-01-01

    The Two-phase Flow, Fluid Stability and Dynamics Workshop was held on May 15, 2003 in Cleveland, Ohio to define a coherent scientific research plan and roadmap that addresses the multiphase fluid problems associated with NASA s technology development program. The workshop participants, from academia, industry and government, prioritized various multiphase issues and generated a research plan and roadmap to resolve them. This report presents a prioritization of the various multiphase flow and fluid stability phenomena related primarily to power, propulsion, fluid and thermal management and advanced life support; and a plan to address these issues in a logical and timely fashion using analysis, ground-based and space-flight experiments.

  17. A two-phase level tracking method

    International Nuclear Information System (INIS)

    Interfacial closure models in most two-fluid system codes for reactor safety are usually tied to the flow regime map through the mean void fraction in a computational cell. When a void fraction discontinuity exists in a computational volume, neither heat nor momentum exchange at the phase interface for this particular cell can be properly represented in finite-difference equations governing the fluid flow. Moreover, finite-difference methods with a fixed, Eulerian grid will inaccurately predict the cell-to-cell convection of mass, momentum and energy when the mean cell macroscopic variables are convected from the cell containing the void fraction front. The adequate modeling of two-phase mixture levels requires the knowledge of front position and void fractions above and below the front. In order to obtain such information, an efficient and simple tracking method was implemented in the TRAC-BWR code (released April 1984). We have tested this method with a simple problem involving a moving two-phase air/water mixture level. The results revealed inconsistencies in the behavior of velocities, pressures and interfacial friction, and some bounded numerical oscillations. Following our numerical experiment, we developed a systematic approach to improve the two-phase level tracking method. We present this approach and the results of implementation in the TRAC-BWR code. (orig.)

  18. Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

    CERN Document Server

    Zboray, Robert; Mor, Ilan; Bromberger, Benjamin; Tittelmeier, Kai

    2015-01-01

    In a previous work we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify the detector and optimize it for the given application, which is described in the present work. Furthermore, we managed to improve the image post-processing methodology and the noise suppression. Using the tailored detector and the improved post-processing significant increase in the image quality and an order of magnitude lower exposure times, down to 3.33 ms, have been achieved with minimized motion artifacts. Similar to the previous study, different two-phase flow regimes such as bubbly slug and churn flows have been e...

  19. Next steps in two-phase flow: executive summary

    Energy Technology Data Exchange (ETDEWEB)

    DiPippo, R.

    1980-09-01

    The executive summary includes the following topics of discussion: the state of affairs; the fundamental governing equations; the one-dimensional mixture model; the drift-flux model; the Denver Research Institute two-phase geothermal flow program; two-phase flow pattern transition criteria; a two-fluid model under development; the mixture model as applied to geothermal well flow; DRI downwell instrumentation; two-phase flow instrumentation; the Sperry Research Corporation downhole pump and gravity-head heat exchanger systems; and the Brown University two-phase flow experimental program. (MHR)

  20. Numerical method for two-phase flow discontinuity propagation calculation

    International Nuclear Information System (INIS)

    In this paper, we present a class of numerical shock-capturing schemes for hyperbolic systems of conservation laws modelling two-phase flow. First, we solve the Riemann problem for a two-phase flow with unequal velocities. Then, we construct two approximate Riemann solvers: an one intermediate-state Riemann solver and a generalized Roe's approximate Riemann solver. We give some numerical results for one-dimensional shock-tube problems and for a standard two-phase flow heat addition problem involving two-phase flow instabilities

  1. Interfacial Thermodynamics of Coexisting Aqueous Polymer Solutions

    NARCIS (Netherlands)

    Vis, M.

    2015-01-01

    Phase separation is commonly observed when two different polymers are present in aqueous solution, forming aqueous two-phase systems which typically consist for 90% of water. It is demonstrated that the presence of charge on one of the polymers results in an electric potential difference between the

  2. Pectinases partitioning in aqueous two-phase systems: an integration of the systems poly(ethylene glycol/crude dextran and poly(ethylene glycol/ammonium sulphate

    Directory of Open Access Journals (Sweden)

    NIKOLA VUKELIC

    2004-04-01

    Full Text Available The reaction of Pd(II with 1,8-dihydroxy-2-(pyrazol-5-ylazo-naphthalene-3-6-disulphonic acid (PACA sorbed onto Dowex 1-X8 ion-exchange resin was investigated with the aim of developing an absorption-spectrophotometric analytical method for the determination of low Pd(II concentrations in water. The immobilized reagent formed a 1:1 complex with Pd(II having an absorption maximum at 650 nm. Parameters, such as pH, wavelength and contact time were optimised for a given amount of the sorbed reagent. The linearity range of absorbance vs. Pd(II concentration extended from 5×10-6 – 5×10-5 M, 5×10-7 – 5×10-6 and 2.5×10-8 – 2.5×10-7 M when using 10, 100 and 200 ml of sample solution, respectively. With a 200 ml sample, the detection limit was 2.5×10-7 M Pd(II. Most metals, except Cu(II, did not interfere when present in up to 100 times the concentration of Pd(II.

  3. Evolution of excitonic states in two-phase systems with quantum dots of II-VI semiconductors near the percolation threshold

    Science.gov (United States)

    Bondar, N. V.; Brodyn, M. S.

    2010-03-01

    In two-phase disordered media composed of borosilicate glass with ZnSe or CdS quantum dots, the formation of a phase percolation transition of carriers for near-threshold concentrations that are manifested in optical spectra has been observed. Microscopic fluctuations of the quantum-dot density near the percolation threshold were found that resembled the phenomenon of critical opalescence, where similar fluctuations of the density of a pure substance appear near to a phase transition. It is proposed that the dielectric mismatch between a matrix and ZnSe or CdS quantum dots plays a significant role in the carrier (exciton) delocalization, resulting in the appearance of a “dielectric Coulomb trap” beyond the QD border and the formation of surface states of excitons. The spatial overlapping of excitonic states at the critical density of quantum dots results in a tunneling of carriers and the formation of a phase percolation transition in such media.

  4. Development of two-phase flow analysis system for increasing thermal efficiency of power plant. (1) 3D analysis for evaluating the thermal-hydraulic behavior in secondary side of the steam generator

    International Nuclear Information System (INIS)

    For upgrades of nuclear power plant with pressurized water reactor, it is one of the effective mean to improve the steam generator (SG) secondary flow. To evaluate thermal-fluid dynamics in secondary system of SG, boiling two-phase phenomenon is needed to analyze. In this study, new numerical analysis system is developing for PWR secondary system including SG and turbine system. Firstly three dimensional two-phase flow analysis model of SG secondary-side is developed with two-fluid model, and we confirm that our model can estimate steam pressure of feeding type SG. Secondary present model is applied to preheat type SG and evaluate the effect of increasing of steam pressure in secondary-side. From this result, we succeeded in predicting the steam pressure increase with improving the method of feedwater supply. (author)

  5. Two-phase flow dynamics in ECC

    International Nuclear Information System (INIS)

    The present report summarizes the achievements within the project ''Two-phase Systems and ECC''. The results during 1978 - 1980 are accounted for in brief as they have been documented in earlier reports. The results during the first half of 1981 are accounted for in greater detail. They contain a new model for the Basset force and test runs with this model using the test code RISQUE. Furthermore, test runs have been performed with TRAC-PD2 MOD 1. This code was implemented on Edwards Pipe Blowdown experiment (a standard test case) and UC-Berkeley Reflooding experiment (a non-standard test case.) (Auth.)

  6. Performance and microbial community dynamics in a two-phase anaerobic co-digestion system using cassava dregs and pig manure.

    Science.gov (United States)

    Ren, Jiwei; Yuan, Xufeng; Li, Jie; Ma, Xuguang; Zhao, Ye; Zhu, Wanbing; Wang, Xiaofen; Cui, Zongjun

    2014-03-01

    The two-phase anaerobic co-digestion of cassava dregs (CD) with pig manure (PM) was evaluated using four sequencing batch reactors (SBRs) and a continuously stirred tank reactor (CSTR). The effect of seven different PM to CD volatile solid ratios (10:0, 8:2, 6:4, 5:5, 4:6, 2:8 and 0:10) on the acidification phase was investigated. Results indicated the concentrations of soluble chemical oxygen demand, NH4-N and volatile fatty acids increased substantially at seven ratios. Co-acidification of PM and CD performed well. Methanogenic fermentation of the acidification products at seven ratios was steady in CSTR. The highest methane yield and VS removal of 0.352m(3)/kg VSadded and 68.5% were achieved at PM:CD (4:6). The microbial population in CSTR was analyzed using molecular methods. Findings revealed that bacteria such as Firmicutes and Bacteroidetes, archaea such as Methanobacteriales and Methanomicrobiales were advantageous populations. Co-digestion of PM and CD supported higher quantity and diversity of methanogens. PMID:24463413

  7. Thermo-Fluid Dynamics of Two-Phase Flow

    CERN Document Server

    Ishii, Mamrou

    2011-01-01

    "Thermo-fluid Dynamics of Two-Phase Flow, Second Edition" is focused on the fundamental physics of two-phase flow. The authors present the detailed theoretical foundation of multi-phase flow thermo-fluid dynamics as they apply to: Nuclear reactor transient and accident analysis; Energy systems; Power generation systems; Chemical reactors and process systems; Space propulsion; Transport processes. This edition features updates on two-phase flow formulation and constitutive equations and CFD simulation codes such as FLUENT and CFX, new coverage of the lift force model, which is of part

  8. Radiation protection of vitamins in aqueous systems

    International Nuclear Information System (INIS)

    A study of the radiation induced decomposition of the B-group vitamins has been carried out in aqueous media at room temperature as well as in rigid matrices at low temperature. The detailed results on the effect of glucose and oxygen as protective additives at the different temperatures are presented in the case of Thiamine (Vitamin B1). Comparative data are given on the extent of decomposition of this and other vitamins of the B-group at room temperature and at 193 K. The importance of these results in connection with the radiation sterilization of pharmaceutical preparations is indicated. (author)

  9. Two Phase Flow Simulation Using Cellular Automata

    International Nuclear Information System (INIS)

    The classical mathematical treatment of two-phase flows is based on the average of the conservation equations for each phase.In this work, a complementary approach to the modeling of these systems based on statistical population balances of aut omata sets is presented.Automata are entities defined by mathematical states that change following iterative rules representing interactions with the neighborhood.A model of automata for two-phase flow simulation is presented.This model consists of fie lds of virtual spheres that change their volumes and move around a certain environment.The model is more general than the classical cellular automata in two respects: the grid of cellular automata is dismissed in favor of a trajectory generator, and the rules of interaction involve parameters representing the actual physical interactions between phases.Automata simulation was used to study unsolved two-phase flow problems involving high heat flux rates. One system described in this work consists of a vertical channel with saturated water at normal pressure heated from the lower surface.The heater causes water to boil and starts the bubble production.We used cellular automata to describe two-phase flows and the interaction with the heater.General rule s for such cellular automata representing bubbles moving in stagnant liquid were used, with special attention to correct modeling of different mechanisms of heat transfer.The results of the model were compared to previous experiments and correlations finding good agreement.One of the most important findings is the confirmation of Kutateladze's idea about a close relation between the start of critical heat flux and a change in the flow's topology.This was analyzed using a control volume located in the upper surface of the heater.A strong decrease in the interfacial surface just before the CHF start was encountered.The automata describe quite well some characteristic parameters such as the shape of the local void fraction in the

  10. Partition of lead in a milk-pectin aqueous biphasic system with complexing agents

    International Nuclear Information System (INIS)

    Aqueous two-phase systems allow partition of metal ions in nondenaturing conditions. From the fresh skim bovine milk spiked with 212Pb and agitated with 4% water solution of apple pectin (degree of esterification - 70%), less than 2.3% is recovered to the pectin phase and in the case of pasteurized milk less than 3.0%. Complexation with chelate forming agents was studied. Aminoacids as glycine, alanine and histidine do not exert influence on the yield, but the recovery in the pectin phase was 22% for cysteine, and 80% in the case of EdtacalTM (calcium salt of ethylenediaminetetraacetic acid). The retention of lead in milk phase is extraordinarily high as compared to strontium and corresponds to the behavior of trivalent ions. (author)

  11. Protons and Hydroxide Ions in Aqueous Systems.

    Science.gov (United States)

    Agmon, Noam; Bakker, Huib J; Campen, R Kramer; Henchman, Richard H; Pohl, Peter; Roke, Sylvie; Thämer, Martin; Hassanali, Ali

    2016-07-13

    Understanding the structure and dynamics of water's constituent ions, proton and hydroxide, has been a subject of numerous experimental and theoretical studies over the last century. Besides their obvious importance in acid-base chemistry, these ions play an important role in numerous applications ranging from enzyme catalysis to environmental chemistry. Despite a long history of research, many fundamental issues regarding their properties continue to be an active area of research. Here, we provide a review of the experimental and theoretical advances made in the last several decades in understanding the structure, dynamics, and transport of the proton and hydroxide ions in different aqueous environments, ranging from water clusters to the bulk liquid and its interfaces with hydrophobic surfaces. The propensity of these ions to accumulate at hydrophobic surfaces has been a subject of intense debate, and we highlight the open issues and challenges in this area. Biological applications reviewed include proton transport along the hydration layer of various membranes and through channel proteins, problems that are at the core of cellular bioenergetics. PMID:27314430

  12. Modeling of two-phase slug flow

    International Nuclear Information System (INIS)

    When gas and liquid flow in a pipe, over a range of flow rates, a flow pattern results in which sequences of long bubbles, almost filling the pipe cross section, are successively followed by liquid slugs that may contain small bubbles. This flow pattern, usually called slug flow, is encountered in numerous practical situations, such as in the production of hydrocarbons in wells and their transportation in pipelines; the production of steam and water in geothermal power plants; the boiling and condensation in liquid-vapor systems of thermal power plants; emergency core cooling of nuclear reactors; heat and mass transfer between gas and liquid in chemical reactors. This paper provides a review of two phase slug flow modeling

  13. Control System of Two-Phase Brushless DC Gyro Motor Based on DSP%基于DSP的两相无刷直流陀螺电机稳速系统

    Institute of Scientific and Technical Information of China (English)

    吴梅锡; 付鲁华; 林玉池

    2013-01-01

    The research of the influence of gyro motor speed stability on the north-finding result is studied in order to improve the gyro north-finding precision. The paper introduces a two-phase brushless DC gyro motor control system based on TMS320LF2407A. First,it expounds the two-phase brushless DC motor's working principle. Then through the design of the hardware and software system, the close-loop control of two-phase brushless DC gyro motor is realized. The experimental results show that,the system can drive the brushless DC gyro motor well starting,braking and smooth running. The precision of the steady speed is less than 10~6 and the characteristics of the system satisfy the gyroscope demand.%为了进一步提高陀螺仪的寻北精度,分析研究了陀螺电机转速大小和转速精度对寻北结果的影响.在此基础上设计了一种基于TMS320LF2407A的两相无刷直流陀螺电机控制系统,阐述了两相无刷直流电机的工作原理,给出了电机的简化结构及数学模型,并通过对硬件系统和软件算法的设计实现了两相无刷直流陀螺电机的闭环控制.实验结果表明:系统可以很好地完成电机的启动、制动和平稳运行,转速精度优于10-6,满足陀螺仪的工作要求.

  14. Two-phase cooling fluids; Les fluides frigoporteurs diphasiques

    Energy Technology Data Exchange (ETDEWEB)

    Lallemand, A. [Institut National des Sciences Appliquees (INSA), 69 - Lyon (France)

    1997-12-31

    In the framework of the diminution of heat transfer fluid consumption, the concept of indirect refrigerating circuits, using cooling intermediate fluids, is reviewed and the fluids that are currently used in these systems are described. Two-phase cooling fluids advantages over single-phase fluids are presented with their thermophysical characteristics: solid fraction, two-phase mixture enthalpy, thermal and rheological properties, determination of heat and mass transfer characteristics, and cold storage through ice slurry

  15. Aspects of two-phase gas--liquid flow

    International Nuclear Information System (INIS)

    A wide range of topics related to current research on liquid-gas flow is reviewed, and the relevance of these topics to the design of heat exchangers is discussed. Information is included on flow patterns; system variables; mathematical models for parallel flow and non-parallel flow; critical two-phase flow; unsteady flow; and types of two-phase flow equipment used in industry. (U.S.)

  16. Isotope effect of potassium in an aqueous/amalgam system

    International Nuclear Information System (INIS)

    The isotope fractionation of potassium in an aqueous (KOH)/amalgam system has been studied. Two types of isotope effects with opposite isotope enrichment directions were observed in the electrolysis of potassium from the aqueous into the amalgam phase under constant electrolytic potentials. It was found that the first isotope effect causing the light isotope enriched in the amalgam is related to the kinetic process of the mass transfer through the aqueous/amalgam interface, while the second one leading to the enrichment of the heavy isotope in the amalgam phase is produced by the isotope-exchange equilibrium. The temperature dependence of the equilibrium isotope effect was also investigated using single-stage and multi-stage techniques. It was observed that the equilibrium isotope effect increases as the temperature increases in the range of 293-371 K. An empirical equation was used to fit the variations of the isotope effects with temperature for potassium together with the other alkaline and alkaline earth metals studied in the same system. The origin of the equilibrium isotope fractionation in the electron-exchange system was discussed. Furthermore, the mass dependence of the separation coefficients of the alkaline and alkaline earth metals observed in aqueous/amalgam and ion-exchange systems were compared. At 293 K the equilibrium isotope separation coefficient for the 39K/41K isotopes in the amalgam system was determined as (5.6 ± 0.6).10-3. (author)

  17. Dehalogenation of Polyhalogenated Compounds Dissolved in Organic Solvents with the Help of AOPs in a Two-Phase Solvent-Water System under the Influence of Ultrasound

    Czech Academy of Sciences Publication Activity Database

    Kaštánek, František; Sobek, Jiří; Kaštánek, P.; Šolcová, Olga; Hájek, Milan

    Rhodes Greece: Global NEST, 2011 - (Lekkas, T.), s. 114 ISBN 978-960-7475-49-7. [International Conference on Environmental Science and Technology CEST 2011 /12./. Dodecanese, Rhodes Island (GR), 08.09.2011-10.09.2011] R&D Projects: GA TA ČR TA01020804 Institutional research plan: CEZ:AV0Z40720504 Keywords : oil-water system * advanced oxidation processes * ultrasound Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  18. Markedly improving asymmetric oxidation of 1-(4-methoxyphenyl) ethanol with Acetobacter sp. CCTCC M209061 cells by adding deep eutectic solvent in a two-phase system

    OpenAIRE

    Wei, Ping; LIANG, JING; Cheng, Jing; Zong, Min-Hua; Lou, Wen-Yong

    2016-01-01

    Background Enantiopure (S)-1-(4-methoxyphenyl) ethanol {(S)-MOPE} can be employed as an important synthon for the synthesis of cycloalkyl [b] indoles with the treatment function for general allergic response. To date, the biocatalytic resolution of racemic MOPE through asymmetric oxidation in the biphasic system has remained largely unexplored. Additionally, deep eutectic solvents (DESs), as a new class of promising green solvents, have recently gained increasing attention in biocatalysis for...

  19. An experimental and theoretical study of thermal-hydrodynamic instability at low mass flow rates in two-phase upflow systems

    International Nuclear Information System (INIS)

    An experimental and analytical investigation of thermal-hydrodynamic instabilities that are associated with Boiling Water Reactors is conducted. The cooling channels of a BWR core is simulated by a single stainless-steel pipe which is heated with an electric current. The flow system consists of this heater, a fluid supply section and a recovery section. These sections together form an open loop that operates under constant inlet and exit pressures. The experiments indicate that the system is subject to thermal-hydrodynamic instabilities which are confined to a certain range of mass flow rates. There exists a narrow stable region at high mass flow rates. Contrary to previous expectations, there exists another stable region at very low mass flow rates. Parallel to the experimental study, an analytical study is conducted in which a mathematical model based on the assumptions of homogeneous fluid and phase equilibrium is used to generate the flow characteristics of the system. Using numerical experimentation techniques, oscillations are simulated and the stability-instability boundaries of the oscillations are determined. It is concluded that the mathematical model also predicts a thermal-hydrodynamically stable region at low mass flow rates

  20. Two-phase flow simulation inside a tubing string with artificial lift system PCP based; Simulacao do escoamento bifasico em uma coluna de producao com sistema de elevacao artificial por BCP

    Energy Technology Data Exchange (ETDEWEB)

    Vidal, F.J.T.; Salazar, A.O.; Maitelli, A.L. [Rio Grande do Norte Univ., Natal, RN (Brazil). Programa de Pos-graduacao em Engenharia Eletrica]. E-mail: francisco@dca.ufrn.br; andres@dca.ufrn.br; maitelli@dca.ufrn.br; Assmann, B.W. [PETROBRAS S.A., Natal/Fortaleza, RN/CE (Brazil). Unidade de Negocios]. E-mail: benno@petrobras.com.br; Lima, J.A. [Rio Grande do Norte Univ., Natal, RN (Brazil). Dept. de Engenharia Mecanica. Programa de Pos-graduacao em Engenharia Mecanica]. E-mail: jalima@dem.ufrn.br

    2005-07-01

    The main goal of the present work is the computational simulation of the vertical two-phase flow within a tubing string in the production of oil equipped with a PCP artificial lift system (Progressive Cavity Pumping). By initially adopting the homogeneous model for the two-phase mixture (oil and gas), the fields of velocity and pressure are evaluated for prediction of pressure loss along the tubing, as well as the spatial and temporal behavior of typical parameters as gas-oil ratio, bubble pressure, solubility ratio, void fraction, gas and oil formation volume factors, among others. Prediction of these properties is an integral part of pressure loss calculations, as well as they constitute essential parameters for optimization of any artificial lift system. The numerical simulation is based on the transport equations (continuity and momentum equations) for a pseudo-fluid through the finite difference method, and the mixture properties are evaluated by employing the black-oil fluid model. Behavior analyses of the main flow variables are made and results for a typical artificial lift system PCP based are discussed. (author)

  1. Review on two-phase flow instabilities in narrow spaces

    International Nuclear Information System (INIS)

    Instabilities in two-phase flow have been studied since the 1950s. These phenomena may appear in power generation and heat transfer systems where two-phase flow is involved. Because of thermal management in small size systems, micro-fluidics plays an important role. Typical processes must be considered when the channel hydraulic diameter becomes very small. In this paper, a brief review of two-phase flow instabilities encountered in channels having hydraulic diameters greater than 10 mm are presented. The main instability types are discussed according to the existing experimental results and models. The second part of the paper examines two-phase flow instabilities in narrow spaces. Pool and flow boiling cases are considered. Experiments as well as theoretical models existing in the literature are examined. It was found that several experimental works evidenced these instabilities meanwhile only limited theoretical developments exist in the literature. In the last part of the paper an interpretation of the two-phase flow instabilities linked to narrow spaces are presented. This approach is based on characteristic time scales of the two-phase flow and bubble growth in the capillaries

  2. Advances in two-phase flow instrumentation

    International Nuclear Information System (INIS)

    Multiphase flow measurements have become increasingly in a number of process and power systems. However, the need to predict system behavior under transient and accident conditions in nuclear reactors has given impetus to research in this area. Since moving internal interfaces make theoretical predictions difficult, much information for design and supporting analyses is based on experimental observation. The simplest models involving parameters representing mixture density and mixture mass flux, assume thermal equillibrium of the two phases, and are applicable only to a limited number of situations. Most of the parameters, such as interface area and local mixture density, needed for more sophisticated models, are particularly difficult to measure. At present, there are no truly direct methods for measuring local void fraction or mass flux. Local measurements can be taken for a cross-section using, for example, a system of simultaneously quick-closing valves. These valves obtained for the cross section can be integrated, and the result compared with direct measurements for an entire pipeline. Consistent results tend to support the response-model used

  3. Computer simulation model for coupled grain growth and Ostwald ripening -- Application to Al2O3-ZrO2 two-phase systems

    International Nuclear Information System (INIS)

    A kinetic model based on generalized continuum time-dependent Ginzburg-Landau (TDGL) equations is proposed for studying coupled grain growth and Ostwald ripening in multiphase systems. In this model, an arbitrary multiphase microstructure is described by many orientation field variables which represent crystallographic orientations of grains in each phase and by n - 1 composition field variables which distinguish the compositional differences among n phases. Microstructural development during simultaneous grain growth and Ostwald ripening is predicted by the temporal evolution of these field variables by numerically solving the TDGL equations. A particular example, Al2O3-ZrO2 particulate composite, was considered. The effects of the volume fraction of ZrO2 on the microstructural features and their evolution were studied and compared to experimental observations and previous thermodynamic analysis

  4. Gas-liquid mass transfer in fixed beds with two-phase cocurrent downflow: gas/Newtonian and non-Newtonian liquid systems

    Energy Technology Data Exchange (ETDEWEB)

    Iliuta, I. [``Politehnica`` Univ. of Bucharest, Faculty of Industrial Chemistry, Dept. of Chemical Engineering (Romania); Thyrion, F.C. [Univ. Catholique de Louvain (Belgium). Chemical Engineering Inst.

    1997-11-01

    New data of gas-liquid mass transfer for cocurrent downflow through packed beds of porous and non-porous particles are presented. Mass transfer parameters for air/carbon dioxide/water, air/carbon dioxide/carboxymethylcellulose solution and air/carbon dioxide/sodium hydroxide systems were evaluated by least square fit of the calculated CO{sub 2} concentration profiles in gas phase to the experimental values. The volumetric liquid-side mass transfer coefficient increases with the increase of the flow consistency index of the liquid. A comparison of the volumetric liquid-side mass transfer coefficient values evaluated with and without taking into account the axial dispersion shows that the influence of the liquid axial dispersion is significant at low liquid velocity and high CMC concentrations, and the influence of the gas axial dispersion is insignificant. (orig.)

  5. Tracer Partitioning in Two-Phase Flow

    Science.gov (United States)

    Sathaye, K.; Hesse, M. A.

    2012-12-01

    The concentration distributions of geochemical tracers in a subsurface reservoir can be used as an indication of the reservoir flow paths and constituent fluid origin. In this case, we are motivated by the origin of marked geochemical gradients in the Bravo Dome natural CO2 reservoir in northeastern New Mexico. This reservoir contains 99% CO2 with various trace noble gas components and overlies the formation brine in a sloping aquifer. It is thought that magmatic CO2 entered the reservoir, and displaced the brine. This displacement created gradients in the concentrations of the noble gases. Two models to explain noble gas partitioning in two-phase flow are presented here. The first model assumes that the noble gases act as tracers and uses a first order non-linear partial differential equation to compute the volume fraction of each phase along the displament path. A one-way coupled partial differential equation determines the tracer concentration, which has no effect on the overall flow or phase saturations. The second model treats each noble gas as a regular component resulting in a three-component, two-phase system. As the noble gas injection concentration goes to zero, we see the three-component system behave like the one-way coupled system of the first model. Both the analytical and numerical solutions are presented for these models. For the process of a gas displacing a liquid, we see that a noble gas tracer with greater preference for the gas phase, such as Helium, will move more quickly along the flowpath than a heavier tracer that will more easily enter the liquid phase, such as Argon. When we include partial miscibility of both the major and trace components, these differences in speed are shown in a bank of the tracer at the saturation front. In the three component model, the noble gas bank has finite width and concentration. In the limit where the noble gas is treated as a tracer, the width of the bank is zero and the concentration increases linearly

  6. Experimental investigation two phase flow in direct methanol fuel cells

    International Nuclear Information System (INIS)

    Direct methanol fuel cells (DMFC) have received many attentions specifically for portable electronic applications since it utilize methanol which is in liquid form in atmospheric condition and high energy density of the methanol. Thus it eliminates the storage problem of hydrogen. It also eliminates humidification requirement of polymeric membrane which is a problem in PEM fuel cells. Some electronic companies introduced DMFC prototypes for portable electronic applications. Presence of carbon dioxide gases due to electrochemical reactions in anode makes the problem a two phase problem. A two phase flow may occur at cathode specifically at high current densities due to the excess water. Presence of gas phase in anode region and liquid phase in cathode region prevents diffusion of fuel and oxygen to the reaction sites thus reduces the performance of the system. Uncontrolled pressure buildup in anode region increases methanol crossover through membrane and adversely effect the performance. Two phase flow in both anode and cathode region is very effective in the performance of DMYC system and a detailed understanding of two phase flow for high performance DMFC systems. Although there are many theoretical and experimental studies available on the DMFC systems in the literature, only few studies consider problem as a two-phase flow problem. In this study, an experimental set up is developed and species distributions on system are measured with a gas chromatograph. System performance characteristics (V-I curves) is measured depending on the process parameters (temperature, fuel ad oxidant flow rates, methanol concentration etc)

  7. Mechanical behavior of shock-wave consolidated nano and micron-sized aluminum/silicon carbide and aluminum/aluminum oxide two-phase systems characterized by light and electron metallography

    Science.gov (United States)

    Alba-Baena, Noe Gaudencio

    This dissertation reports the results of the exploratory study of two-phase systems consisting of 150 microm diameter aluminum powder mechanically mixed with 30 nm and 30 microm diameter SiC and Al2O3 powders (in volume fractions of 2, 4, and 21 percent). Powders were mechanically mixed and green compacted to ˜80% theorical density in a series of cylindrical fixtures (steel tubes). The compacted arrangements were explosively consolidated using ammonium nitrate-fuel oil (ANFO) to form stacks of two-phase systems. As result, successfully consolidated cylindrical monoliths of 50 mm (height) x 32 mm (in diameter) were obtained. By taking advantage of the use of SWC (shock wave consolidation) and WEDM (wire-electric discharge machining), the heterogeneous systems were machined in a highly efficiency rate. The sample cuts used for characterization and mechanical properties testing, require the use of less that 10cc of each monolith, in consequence there was preserved an average of 60% of the obtained system monoliths. Consolidated test cylinders of the pure Al and two-phase composites were characterized by optical metallography and TEM. The light micrographs for the five explosively consolidated regimes: aluminum powder, nano and micron-sized Al/Al2O3 systems, and the nano and micron-sized Al/SiC systems exhibit similar ductility in the aluminum grains. Low volume fraction systems exhibit small agglomerations at the grain boundaries for the Al/Al2O3 system and the Al/SiC system reveal a well distributed phase at the grain boundaries. Large and partially bonded agglomerations were observable in the nano-sized high volume fraction (21%) systems, while the micron-sized Al/ceramic systems exhibit homogeneous distribution along the aluminum phase grains. TEM images showed the shock-induced dislocation cell structure, which has partially recrystallized to form a nano grain structure in the consolidated aluminum powder. Furthermore, the SiC nano-agglomerates appeared to have

  8. Temperature dependent grain growth of forsterite-nickel mixtures: Implications for grain growth in two-phase systems and applications to the H-chondrite parent body

    Science.gov (United States)

    Guignard, J.; Toplis, M. J.; Bystricky, M.; Monnereau, M.

    2016-06-01

    Grain growth experiments in the system forsterite (Fo) + nickel (Ni) have been performed on two analogue mixtures of ordinary chondrites, with volume % of Fo:Ni (95:5) and (80:20). These two mixtures have been studied at temperatures of 1390 °C and 1340 °C, at an oxygen fugacity (fO2) three orders of magnitude below the Ni-NiO buffer, for durations between 2 h and 10 days. Microstructures and grain size distributions show that grain growth is normal and that for durations >10 h the Zener relation is verified (i.e., the ratio of Fo and Ni grain size is independent of time). Comparison with results previously obtained at 1440 °C shows a similar grain growth exponent (n ˜ 5) for both phases, consistent with growth of forsterite by grain boundary migration, limited by the growth-rate of nickel. The details of size distribution frequencies and the value of grain-growth exponent indicate that the nickel grains, which pin forsterite grain boundaries, grow by diffusion along one-dimensional paths (i.e., along forsterite triple junctions). The derived activation energies for nickel and forsterite are 235 ± 33 kJ /mol and 400 ± 48 kJ /mol respectively. Within the framework of the Zener relation, this unexpected difference of activation energy is shown to be related to temperature-dependent variations in the ratio of Ni and Fo grain-size that are consistent with observed variations in Fo-Ni-Fo dihedral angle. These data thus indicate that the presence of all phases should be taken into account when considering the activation energy of growth rate of individual phases. As an application, the experimentally derived growth law for metal has been used in conjunction with temperature-time paths taken from models of the thermal history of the H-chondrite parent body to estimate the grain size evolution of metal in H-chondrites. A remarkably self-consistent picture emerges from experimentally derived grain-growth laws, textural data of metal grains in well characterised H

  9. Ecoulements diphasiques instables dans les systèmes pipeline/riser Unsteady Two-Phase Flows in Pipeline/Riser Systems

    Directory of Open Access Journals (Sweden)

    Fabre J.

    2006-11-01

    Full Text Available Les instabilités hydrodynamiques de l'écoulement dans les systèmes pipeline/riser ont été étudiées sur une boucle d'essais en tubes transparents de diamètre intérieur 0,053 m, longueur 25 m pour la partie pipeline et 13,5 m pour la partie riser. Les expériences effectuées sur de l'eau et de l'air, à différentes pentes du pipeline et pour plusieurs valeurs du débit d'entrée, ont permis l'observation d'instabilités à grande échelle à faible débit de liquide et de gaz. Les cartes de configuration d'écoulement ont été établies pour trois pentes différentes du pipeline. Le modèle numérique développé à partir de ces données résout les équations locales instantanées de bilan de masse et de quantité de mouvement de ces écoulements par la méthode des caractéristiques. L'évolution des pressions, fraction de vide, débit de gaz et de liquide au cours du temps, prévue par le modèle, est généralement en bon accord avec les données expérimentales. Hydrodynamic instabilities of flow in pipeline/riser systems were studied on a test loop made of transparent tubes with an ID of 0. 053 m and 25 m long for the pipeline part and 13. 5 m long for the riser. Experiments performed with water and air, with different slopes of the pipeline and with several inlet flow rates, reveal large-scale instabilities at low liquid and gas flow rates. Flow configuration maps were compiled for three different pipeline slopes. The numerical model developed from these data solves instantaneous local equations for the mass balance and amount of movement of such flows by the method of characteristics. Variations in pressures, in the void fraction and in gas and liquid flow in the time forecast by the model are generally in good agreement with experimental data.

  10. DESIGN OF ROBOTIC COLONIZER CONTROL SYSTEM FOR AQUEOUS ENVIRONMENT

    OpenAIRE

    C Venkatesh; C.CHANDRA SEKHAR

    2013-01-01

    Now a days there is a huge interest on underwater communication systems for various applications in order to explore aqueous environments. Intelligent robots and cooperative multi- agent robotic systems can be very efficient tools to speed up search and research operations in remote areas. Robots are also useful to do jobs inareas and in situations that are hazardous for human, they can go anywhere that is not reachable my humans and can go into gaps and move trough small holes that are impos...

  11. Contribution to the theory of the two phase blowdown phenomenon

    International Nuclear Information System (INIS)

    In order to accurately model the two phase portion of a pressure vessel blowdown, it becomes necessary to understand the bubble growth mechanism within the vessel during the early period of the decompression, the two phase flow behavior within the vessel, and the applicability of the available two phase critical flow models to the blowdown transient. To aid in providing answers to such questions, a small scale, separate effects, isothermal blowdown experiment has been conducted in a small pressure vessel. The tests simulated a full open, double ended, guillotine break in a large diameter, short exhaust duct from the vessel. The vaporization process at the initiation of the decompression is apparently that of thermally dominated bubble growth originating from the surface cavities inside the system. Thermodynamic equilibrium of the remaining fluid within the vessel existed in the latter portion of the decompression. A nonuniform distribution of fluid quality within the vessel was also detected in this experiment. By comparison of the experimental results from this and other similar transient, two phase critical flow studies with steady state, small duct, two phase critical flow data, it is shown that transient, two phase critical flow in large ducts appears to be similar to steady state, two phase critical flow in small ducts. Analytical models have been developed to predict the blowdown characteristics of a system during subcooled decompression, the bubble growth regime of blowdown, and also in the nearly dispersed period of depressurization. This analysis indicates that the system pressure history early in the blowdown is dependent on the internal vessel surface area, the internal vessel volume, and also on the exhaust flow area from the system. This analysis also illustrates that the later period of decompression can be predicted based on thermodynamic equilibrium

  12. Advanced Aqueous Separation Systems for Actinide Partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nash, Kenneth L.; Clark, Sue; Meier, G Patrick; Alexandratos, Spiro; Paine, Robert; Hancock, Robert; Ensor, Dale

    2012-03-21

    One of the most challenging aspects of advanced processing of spent nuclear fuel is the need to isolate transuranium elements from fission product lanthanides. This project expanded the scope of earlier investigations of americium (Am) partitioning from the lanthanides with the synthesis of new separations materials and a centralized focus on radiochemical characterization of the separation systems that could be developed based on these new materials. The primary objective of this program was to explore alternative materials for actinide separations and to link the design of new reagents for actinide separations to characterizations based on actinide chemistry. In the predominant trivalent oxidation state, the chemistry of lanthanides overlaps substantially with that of the trivalent actinides and their mutual separation is quite challenging.

  13. Definition of two-phase flow behaviors for spacecraft design

    Science.gov (United States)

    Reinarts, Thomas R.; Best, Frederick R.; Miller, Katherine M.; Hill, Wayne S.

    1991-01-01

    Data for complete models of two-phase flow in microgravity are taken from in-flight experiments and applied to an adiabatic flow-regime analysis to study the feasibility of two-phase systems for spacecraft. The data are taken from five in-flight experiments by Hill et al. (1990) in which a two-phase pump circulates a freon mixture and vapor and liquid flow streams are measured. Adiabatic flow regimes are analyzed based on the experimental superficial velocities of liquid and vapor, and comparisons are made with the results of two-phase flow regimes at 1 g. A motion analyzer records the flow characteristics at a rate of 1000 frames/sec, and stratified flow regimes are reported at 1 g. The flow regimes observed under microgravitational conditions are primarily annular and include slug and bubbly-slug regimes. The present data are of interest to the design and analysis of two-phase thermal-management systems for use in space missions.

  14. INFLUENCE OF SURFACTANT ON TWO-PHASE FLOW REGIME AND PRESSURE DROP IN UPWARD INCLINED PIPES

    Institute of Scientific and Technical Information of China (English)

    XIA Guo-dong; CHAI Lei

    2012-01-01

    The influence of a surfactant on the two-phase flow regime and the pressure drop in upward inclined pipes is investigated for various gas/liquid flow rates.The air/water and air/100 ppm sodium dodecyl sulphate aqueous solution are used as the working fluids.The influence of the surfactant on the two-phase flow regime in upward inclined pipes is investigated using the electrical tomographic technique.For 0°,2.5° and 5° pipe inclinations,the surfactant has obvious effect on the transition from the stratified wavy flow to the annular flow,and the range of the stratified smooth flow regime is also extended to higher gas velocities.For 10°pipe inclination,no stratified flow regime is observed in the air/water flow.In the air/surfactant solution system,however,the stratified flow regime can be found in the range of USG =10m/s-28m/s and USL =0.07 m/s-0.2 m/s.For all inclination angles,the changes of the pressure gradient characteristics are accompanied with the flow pattern transitions.Adding surfactant in a two-phase flow would reduce the pressure gradient significantly in the slug flow and annular flow regimes.In the annular flow regime,the pressure gradient gradually becomes free of the influence of the upward inclined angle,and is only dependent on the property of the two-phase flow.

  15. Two phase discharge flow prediction in safety valves

    International Nuclear Information System (INIS)

    Safety relief valves (SRV) are necessary elements in the protection of any pressurised system and the prediction of the expected discharge flows is an important consideration for the valve sizing to ensure that rupture pressures do not occur. The high speed flows that occur inside the SRV are complex particularly when a two-phase flow is involved and lead to a less capable protection device which result in larger valves compared to single phase flows. In this paper the ability of a CFD based two phase mixture model to predict the critical flows of air and water through a safety valve is examined. An industrial refrigeration safety relief valve of ¼″ inlet bore size has been tested experimentally over a pressure range of 6–15 barg and air mass qualities from 0.1 to 1 when discharging to near atmospheric conditions for a fully open condition. A two-dimensional mixture model consisting of mixture mass, momentum, and energy equations, combined with a liquid mass equation and the standard k–ε turbulence model for mixture turbulent transport has been used to predict the two phase flows through the valve. The mixture model results have been compared with the Homogenous Equilibrium Model (HEM) commonly used for in valve sizing in non flashing two phase flow conditions. The accuracy of the models over the two phase flow range are quantified and discussed

  16. Two-phase flow characteristics analysis code: MINCS

    International Nuclear Information System (INIS)

    Two-phase flow characteristics analysis code: MINCS (Modularized and INtegrated Code System) has been developed to provide a computational tool for analyzing two-phase flow phenomena in one-dimensional ducts. In MINCS, nine types of two-phase flow models-from a basic two-fluid nonequilibrium (2V2T) model to a simple homogeneous equilibrium (1V1T) model-can be used under the same numerical solution method. The numerical technique is based on the implicit finite difference method to enhance the numerical stability. The code structure is highly modularized, so that new constitutive relations and correlations can be easily implemented into the code and hence evaluated. A flow pattern can be fixed regardless of flow conditions, and state equations or steam tables can be selected. It is, therefore, easy to calculate physical or numerical benchmark problems. (author)

  17. Velocity and energy relaxation in two-phase flows

    CERN Document Server

    Meyapin, Yannick; Gisclon, Marguerite

    2009-01-01

    In the present study we investigate analytically the process of velocity and energy relaxation in two-phase flows. We begin our exposition by considering the so-called six equations two-phase model [Ishii1975, Rovarch2006]. This model assumes each phase to possess its own velocity and energy variables. Despite recent advances, the six equations model remains computationally expensive for many practical applications. Moreover, its advection operator may be non-hyperbolic which poses additional theoretical difficulties to construct robust numerical schemes |Ghidaglia et al, 2001]. In order to simplify this system, we complete momentum and energy conservation equations by relaxation terms. When relaxation characteristic time tends to zero, velocities and energies are constrained to tend to common values for both phases. As a result, we obtain a simple two-phase model which was recently proposed for simulation of violent aerated flows [Dias et al, 2010]. The preservation of invariant regions and incompressible li...

  18. Two-phase flow in fractured rock

    International Nuclear Information System (INIS)

    This report gives the results of a three-day workshop on two-phase flow in fractured rock. The workshop focused on two-phase flow processes that are important in geologic disposal of nuclear waste as experienced in a variety of repository settings. The goals and objectives of the workshop were threefold: exchange information; describe the current state of understanding; and identify research needs. The participants were divided into four subgroups. Each group was asked to address a series of two-phase flow processes. The following groups were defined to address these processes: basic flow processes; fracture/matrix interactions; complex flow processes; and coupled processes. For each process, the groups were asked to address these four issues: (1) describe the two-phase flow processes that are important with respect to repository performance; (2) describe how this process relates to the specific driving programmatic issues given above for nuclear waste storage; (3) evaluate the state of understanding for these processes; and (4) suggest additional research to address poorly understood processes relevant to repository performance. The reports from each of the four working groups are given here

  19. Separation of Nanoparticles in Aqueous Multiphase Systems through Centrifugation

    KAUST Repository

    Akbulut, Ozge

    2012-08-08

    This paper demonstrates the use of aqueous multiphase systems (MuPSs) as media for rate-zonal centrifugation to separate nanoparticles of different shapes and sizes. The properties of MuPSs do not change with time or during centrifugation; this stability facilitates sample collection after separation. A three-phase system demonstrates the separation of the reaction products (nanorods, nanospheres, and large particles) of a synthesis of gold nanorods, and enriches the nanorods from 48 to 99% in less than ten minutes using a benchtop centrifuge. © 2012 American Chemical Society.

  20. Determination of bubble parameters in two-phase flow

    International Nuclear Information System (INIS)

    A development of a probe-detector system for measurement of bubble parameters like size, rise velocity and void fraction in two-phase flow is presented. The method uses an electro resistivity probe and a compact electronic circuit has been developed for obtain this purpose. (author)

  1. Membraneless dialysis of strontium in aqueous liquid-liquid milk-pectin system

    International Nuclear Information System (INIS)

    Binding of added strontium by milk proteins under native conditions was investigated using pectin of various degrees of esterification. The partition of strontium, as well as cesium and europium, in aqueous two-phase milk-pectin system, is discussed in terms of 'membraneless dialysis' and described by Donnan equilibria, and compared with the distribution between cation exchanger and milk, artificial milk serum, or pectin solutions. When going from pectin with a degree of esterification D.E. = 93.2 to 61.4, the distribution of strontium decreases for about 40% in favor of pectin phase and this was explained by a relatively lower degree of dissociation of free carboxyle groups of pectin. The low-molecular fraction of added strontium in milk was assessed from Dowex 50*8 sorption data to be 31%, and that of cesium and europium 58% and 40%, respectively. However, distribution ratio of strontium and europium in milk/pectin system is much higher than it would correspond to the ion exchanger adsorption data. (author) 16 refs.; 2 tabs

  2. Some applications of radioisotopes in physical chemistry - two-phase equilibria and packed-column techniques

    International Nuclear Information System (INIS)

    One of the most effective applications of radioisotopes in physical chemistry is the study of two-phase equilibria; our own studies for a number of years have been concentrated on ion exchange reactions with commercial organic and with new types of non-siliceous inorganic exchangers. With the former, the studies were carried out in depth, covering at times most elements in the periodic table, the objective being comparison of functional relationships of many systems rather than the detailed study of a few. With the inorganic exchangers, the objective was also broad coverage of many systems, particularly comparison of large numbers of adsorbents. Since these studies required hundreds of thousands of analyses, they would have been almost impossible with conventional analytical techniques. The feasibility of such studies can therefore be considered a direct outgrowth of the ready availability of radioactive tracers, and the steady increase in precision and convenience of counting techniques. More recently, packed-column techniques have been developed which, with radioactive tracers and relatively simple equipment, permit ready extension of studies of two-phase equilibria and of the kinetics of interfaces to higher temperatures (at present up to 200o C). Sampling and continuous monitoring techniques were used. Through adsorption and solubility studies, information on enthalpy and entropy changes of adsorption and ion-exchange reactions is reported as well as information on heats of solution, activity coefficients in concentrated electrolyte mixtures, and on complexing reactions in high-temperature aqueous systems. (author)

  3. Two phase flow instabilities in horizontal straight tube evaporator

    OpenAIRE

    Liang, Nan; Shuangquan, Shao; Tian, Changqing; Yan, Y. Y.

    2010-01-01

    Abstract It is essential to ensure the stability of a refrigeration system if the oscillation in evaporation process is the primary cause for the whole system instability. This paper is concerned with an experimental investigation of two phase flow instabilities in a horizontal straight tube evaporator of a refrigeration system. The relationship between pressure drop and mass flow with constant heat flux and evaporation pressure is measured and determined. It is found that there is...

  4. An introduction to two-phase flows

    International Nuclear Information System (INIS)

    This course aims at proposing the necessary background for a rational approach to two-phase flows which are notably present in numerous industrial devices and equipment designed to perform energy transfer or mass transfer. The first part proposes a phenomenological approach to main two-phase flow structures and presents their governing variables. The second part presents some proven measurement techniques. The third part focuses on modelling. It recalls the equation elaboration techniques which are based on basic principles of mechanics and thermodynamics and on the application of different averaging operators to these principles. Some useful models are then presented such as models of pressure loss in a duct. The last chapter addresses some fundamental elements of heat transfers in ebullition and condensation

  5. Thermoreversible (Ionic-Liquid-Based) Aqueous Biphasic Systems

    Science.gov (United States)

    Passos, Helena; Luís, Andreia; Coutinho, João A. P.; Freire, Mara G.

    2016-02-01

    The ability to induce reversible phase transitions between homogeneous solutions and biphasic liquid-liquid systems, at pre-defined and suitable operating temperatures, is of crucial relevance in the design of separation processes. Ionic-liquid-based aqueous biphasic systems (IL-based ABS) have demonstrated superior performance as alternative extraction platforms, and their thermoreversible behaviour is here disclosed by the use of protic ILs. The applicability of the temperature-induced phase switching is further demonstrated with the complete extraction of two value-added proteins, achieved in a single-step. It is shown that these temperature-induced mono(bi)phasic systems are significantly more versatile than classical liquid-liquid systems which are constrained by their critical temperatures. IL-based ABS allow to work in a wide range of temperatures and compositions which can be tailored to fit the requirements of a given separation process.

  6. 超声波辅助双水相提取条斑紫菜黄酮类物质及其抗氧化活性研究%Ultrasonic-Assisted Aqueous Two-Phase Extraction and Antioxidant Activity of Total Flavonoids from

    Institute of Scientific and Technical Information of China (English)

    陈利梅

    2012-01-01

    An ultrasonic-assisted aqueous two phase extraction method was presented for extracting total flavonoids from Porphyra yezoensisand the extraction conditions were optimized by an orthogonal array experimental design. Meanwhile, the hydroxyl free radical scavenging activity of total flavonoids from Porphyra yezoensis was determined. The results indicated that the method allowed effective extraction of total flavonoids. The extraction yield was 0.148%, which was significantly higher than that obtained by ethanol-water reflux extraction. The optimal extraction conditions were obtained as follows: n-propanol-to- water ratio 0.6, ammonium sulphate concentration 0.30 g/mL, ultrasonic treatment time 20 rain and material-to-liquid ratio 0.04. P. yezoensis abtmdanfly contained flavonoids and the total flavonoid extract from it had excellent hydroxyl free radical scavenging activity thus providing a good natural free radical scavenger.%利用超声波辅助丙醇-硫酸铵双水相体系提取紫菜中总黄酮,并优化提取条件,测定总黄酮提取物对羟自由基(·OH)的抑制活性。结果表明:本方法可有效地从紫菜中提取总黄酮,紫菜总黄酮提取率为0.148%,明显高于乙醇-水回流提取法。最优提取条件为醇水比为0.6、硫酸铵质量浓度0.30g/mL、超声时间20min、料液比0.04。紫菜中含有较丰富的黄酮类物质,提取物对·OH具有良好的抑制作用,是一种有效的天然自由基清除剂,具有很大的开发利用前景。

  7. Gauging a two phase hadron model

    International Nuclear Information System (INIS)

    We generate a two phase model for hadrons starting from a lagrangian density in terms of quarks and meson fields which extend over all space-time. Our procedure is based on the non-topological soliton approach of Friedberg and Lee. We then apply this scheme to study the coupling of gauge weak bosons, for which the surface is transparent, in a consistent manner. (orig.)

  8. Two-phase flow of ferrofluids

    OpenAIRE

    Chi, Changqing

    2016-01-01

    Ferrofluids currently are the only type of magnetic liquid materials with wide practical use. The theory on ferrofluids is an example of success to apply statistics to science. Ferrofluids are two-phase liquids consisting of dispersed nanoscale ferromagnetic particles suspended in a carrier fluid. Due to their tiny size, individual ferromagnetic particles clearly exhibit Brownian motions. Only when a large number of randomly-moving particles are subject to an external magnetic field, can they...

  9. Two phase picture in driven polymer translocation

    OpenAIRE

    Saito, Takuya; Sakaue, Takahiro

    2012-01-01

    Two phase picture is a simple and effective methodology to capture the nonequilibrium dynamics of polymer associated with tension propagation. When applying it to the driven translocation process, there is a point to be noted, as briefly discussed in our recent article [Phys. Rev. E 85, 061803 (2012)]. In this article, we address this issue in detail and modify our previous prediction [Euro. Phys. J. E 34, 135 (2011)] by adopting an alternative steady-state ansatz. The modified scaling predic...

  10. Two-phase charge-coupled device

    Science.gov (United States)

    Kosonocky, W. F.; Carnes, J. E.

    1973-01-01

    A charge-transfer efficiency of 99.99% per stage was achieved in the fat-zero mode of operation of 64- and 128-stage two-phase charge-coupled shift registers at 1.0-MHz clock frequency. The experimental two-phase charge-coupled shift registers were constructed in the form of polysilicon gates overlapped by aluminum gates. The unidirectional signal flow was accomplished by using n-type substrates with 0.5 to 1.0 ohm-cm resistivity in conjunction with a channel oxide thickness of 1000 A for the polysilicon gates and 3000 A for the aluminum gates. The operation of the tested shift registers with fat zero is in good agreement with the free-charge transfer characteristics expected for the tested structures. The charge-transfer losses observed when operating the experimental shift registers without the fat zero are attributed to fast interface state trapping. The analytical part of the report contains a review backed up by an extensive appendix of the free-charge transfer characteristics of CCD's in terms of thermal diffusion, self-induced drift, and fringing field drift. Also, a model was developed for the charge-transfer losses resulting from charge trapping by fast interface states. The proposed model was verified by the operation of the experimental two-phase charge-coupled shift registers.

  11. (Liquid + liquid) equilibrium of the ternary aqueous system containing poly ethylene glycol dimethyl ether 2000 and tri-potassium citrate at different temperatures

    International Nuclear Information System (INIS)

    Highlights: ► LLE of (poly ethylene glycol dimethyl ether + tri potassium citrate + H2O) was studied. ► The effect of temperature on the binodals and tie-lines were investigated. ► Binodal data were correlated with two empirical equations. ► Tie-lines were fitted to several models including extended NRTL and modified NRTL. ► The entropy is driving force for aqueous two-phase formation. - Abstract: (Liquid + liquid) equilibria (LLE) of the {poly ethylene glycol di-methyl ether 2000 (PEGDME2000) + tri-potassium citrate + H2O} system have been determined experimentally at T = (298.15, 303.15, 308.15, and 318.15) K. The effect of temperature on the binodals and tie-lines for the investigated aqueous two-phase system (ATPS) has also been studied. In this work, the three fitting parameters of the Merchuk equation and an empirical equation that we proposed in our previous work were obtained with the temperature dependence expressed in the linear form with (T − T0) K as a variable. Furthermore, the Othmer–Tobias and Bancroft, a temperature dependent Setschenow-type equation and osmotic virial model, the segment-based local composition models (the extended NRTL and the modified NRTL) were used for the correlation and prediction of the liquid–liquid phase behavior of the system studied. In addition, the effect of the polymers PEGDME2000 and poly ethylene glycol 2000 on the phase forming ability were studied. Also, the free energies of cloud points for this system were calculated from which it was concluded that the increase of the entropy is driving force for formation of studied aqueous two-phase system.

  12. On the modelling and the analysis of two-phase flow instabilities in pipeline-riser systems; Modelisation et analyse des instabilites d'ecoulements diphasiques dans les conduites petrolieres du type pipeline-riser

    Energy Technology Data Exchange (ETDEWEB)

    Zakarian, E.

    2000-03-10

    Recent estimations predict that over half the remaining offshore oil and gas reserves are located in deep water and marginal fields. For such reserves, economic recovery methods are required. Then, multiphase flows are transported within pipelines and separated on treatment platforms built in shallow water or processed in onshore facilities. Unfortunately, hydrodynamic instabilities may occur whenever gas and liquid flow in a pipeline, generating serious operating problems. This dissertation presents a new way to model two-phase flows in pipelines such as pipeline-riser systems. Equations are algebraic and differential. Their smoothness depends on the closure laws of the problem such as slip or friction laws. Smooth forms of these closure laws are presented for the first time in this dissertation. Therefore, a mathematical analysis of our model fits into a classical frame: a linear analysis leads to an analytical expression of the boundary between stable and unstable flows. A nonlinear analysis provides for the first time, the bifurcation curves of gas-liquid flows in pipe-riser systems, locally round their stability boundary. (author)

  13. Analysis of Direct Samples of Early Solar System Aqueous Fluids

    Science.gov (United States)

    Zolensky, Michael E.; Bodnar, R J.; Fedele, L.; Yurimoto,H.; Itoh, S.; Fries, M.; Steele, A.

    2012-01-01

    Over the past three decades we have become increasingly aware of the fundamental importance of water, and aqueous alteration, on primitive solar-system bodies. Some carbonaceous and ordinary chondrites have been altered by interactions with liquid water within the first 10 million years after formation of their parent asteroids. Millimeter to centimeter-sized aggregates of purple halite containing aqueous fluid inclusions were found in the matrix of two freshly-fallen brecciated H chondrite falls, Monahans (1998, hereafter simply "Monahans") (H5) and Zag (H3-6) (Zolensky et al., 1999; Whitby et al., 2000; Bogard et al., 2001) In order to understand origin and evolution of the aqueous fluids inside these inclusions we much measure the actual fluid composition, and also learn the O and H isotopic composition of the water. It has taken a decade for laboratory analytical techniques to catch up to these particular nanomole-sized aqueous samples. We have recently been successful in (1) measuring the isotopic composition of H and O in the water in a few fluid inclusions from the Zag and Monahans halite, (2) mineralogical characterization of the solid mineral phases associated with the aqueous fluids within the halite, and (3) the first minor element analyses of the fluid itself. A Cameca ims-1270 equipped with a cryo-sample-stage of Hokkaido University was specially prepared for the O and H isotopic measurements. The cryo-sample-stage (Techno. I. S. Corp.) was cooled down to c.a. -190 C using liquid nitrogen at which the aqueous fluid in inclusions was frozen. We excavated the salt crystal surfaces to expose the frozen fluids using a 15 keV Cs+ beam and measured negative secondary ions. The secondary ions from deep craters of approximately 10 m in depth emitted stably but the intensities changed gradually during measurement cycles because of shifting states of charge compensation, resulting in rather poor reproducibility of multiple measurements of standard fluid

  14. DOE workshop: Sedimentary systems, aqueous and organic geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methods for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries.

  15. Photolysis of difloxacin and sarafloxacin in aqueous systems.

    Science.gov (United States)

    Prabhakaran, Deivasigamani; Sukul, Premasis; Lamshöft, Marc; Maheswari, Mohan Akhila; Zühlke, Sebastian; Spiteller, Michael

    2009-10-01

    The photodegradation of two fluoroquinolone veterinary antibiotics, difloxacin (DIF) and sarafloxacin (SARA) has been explored for the first time in aqueous systems. The study was performed to evaluate the influence of pH, inorganics, humic substances, and other additives. The drugs followed first-order degradation kinetics in matrix free aqueous medium with a rate constant 'k' value of 0.82 and 0.26 h(-1) for DIF and SARA, respectively. Studies performed at various pH revealed that the photolysis rates dropped sharply at pH >7 for DIF, while SARA dissipated faster with increasing pH. Humic substances acted as light barriers by attenuating the light intensity, to retard the drug degradation process. However, rapid drug dissipation was observed in the presence of additives like acetone, hydrogen peroxide, and phosphates, while inorganics such as fluoride, nitrate, and sulfate did not influence the drug photodegradation. Studies on the photolysis of DIF and SARA in river water revealed that both the drugs degraded rapidly under conditions that were relevant to natural systems, following direct photolysis mechanism. It was observed that SARA was the primary photoproduct of DIF and showed relatively a higher persistence than DIF. The findings were also substantiated by the quantum yield (Phi(c)) calculations. The analytical measurements were carried out with LC-MS/MS. PMID:19751946

  16. DOE workshop: Sedimentary systems, aqueous and organic geochemistry

    International Nuclear Information System (INIS)

    A DOE workshop on sedimentary systems, aqueous and organic geochemistry was held July 15-16, 1993 at Lawrence Berkeley Laboratory. Papers were organized into several sections: Fundamental Properties, containing papers on the thermodynamics of brines, minerals and aqueous electrolyte solutions; Geochemical Transport, covering 3-D imaging of drill core samples, hydrothermal geochemistry, chemical interactions in hydrocarbon reservoirs, fluid flow model application, among others; Rock-Water Interactions, with presentations on stable isotope systematics of fluid/rock interaction, fluid flow and petotectonic evolution, grain boundary transport, sulfur incorporation, tracers in geologic reservoirs, geothermal controls on oil-reservoir evolution, and mineral hydrolysis kinetics; Organic Geochemistry covered new methods for constraining time of hydrocarbon migration, kinetic models of petroleum formation, mudstones in burial diagenesis, compound-specific carbon isotope analysis of petroleums, stability of natural gas, sulfur in sedimentary organic matter, organic geochemistry of deep ocean sediments, direct speciation of metal by optical spectroscopies; and lastly, Sedimentary Systems, covering sequence stratigraphy, seismic reflectors and diagenetic changes in carbonates, geochemistry and origin of regional dolomites, and evidence of large comet or asteroid impacts at extinction boundaries

  17. Fluctuation model of a nonequilibrium two-phase channel flow

    International Nuclear Information System (INIS)

    An ill-posed Cauchy problem for a model of a nonequilibrium two-phase flow in the barotropic approximation is transformed into a well-posed problem by changing the type of the initial hyperbolic equations. Approximation of fluctuations of the phase velocities by a random delta-correlated process and averaging of the equations over its realizations generate a system of parabolic equations. Results of numerical integration of this system are compared with experiment and calculations by well-known models

  18. Fluctuation model of a nonequilibrium two-phase channel flow

    Energy Technology Data Exchange (ETDEWEB)

    Krivoshei, F.A. [Inst. of Engineering Thermophysics, Kiev (Ukraine)

    1994-12-01

    An ill-posed Cauchy problem for a model of a nonequilibrium two-phase flow in the barotropic approximation is transformed into a well-posed problem by changing the type of the initial hyperbolic equations. Approximation of fluctuations of the phase velocities by a random delta-correlated process and averaging of the equations over its realizations generate a system of parabolic equations. Results of numerical integration of this system are compared with experiment and calculations by well-known models.

  19. Modeling and numerical study of two phase flow

    International Nuclear Information System (INIS)

    This thesis describes the modelization and the simulation of two-phase systems composed of droplets moving in a gas. The two phases interact with each other and the type of model to consider directly depends on the type of simulations targeted. In the first part, the two phases are considered as fluid and are described using a mixture model with a drift relation (to be able to follow the relative velocity between the two phases and take into account two velocities), the two-phase flows are assumed at the equilibrium in temperature and pressure. This part of the manuscript consists of the derivation of the equations, writing a numerical scheme associated with this set of equations, a study of this scheme and simulations. A mathematical study of this model (hyperbolicity in a simplified framework, linear stability analysis of the system around a steady state) was conducted in a frame where the gas is assumed baro-tropic. The second part is devoted to the modelization of the effect of inelastic collisions on the particles when the time of the simulation is shorter and the droplets can no longer be seen as a fluid. We introduce a model of inelastic collisions for droplets in a spray, leading to a specific Boltzmann kernel. Then, we build caricatures of this kernel of BGK type, in which the behavior of the first moments of the solution of the Boltzmann equation (that is mass, momentum, directional temperatures, variance of the internal energy) are mimicked. The quality of these caricatures is tested numerically at the end. (author)

  20. Two-Phase Dechlorination/Detoxification of Lindane (Hexachlorocyclohexane

    Directory of Open Access Journals (Sweden)

    Abdul Ghaffar

    2014-01-01

    Full Text Available Dechlorination of lindane was carried out in a two-phase reaction. In first phase Devarda’s alloy and sodium borohydride were used in aqueous/ethanol reaction media. The reaction duration and temperature were optimized. In first phase higher dechlorination (78% was achieved at 80°C with 40-minute reaction time and the products were chlorobenzene, dichlorobenzene, and chlorocyclohexane. In second phase, Ca(OH2 and sulfur were added in reaction media. The reactions conditions like temperature and reaction time were optimized. After 30 minutes, dechlorination was enhanced from 78% to 94% and the final products were benzene, phenol, catechol, benzenethiol, cyclohexane, cyclohexanol, and cyclohexanethiol. The results suggested that dechlorination of lindane in first and second phase was carried out through hydrodechlorination and substitution reactions, respectively. The developed method was applied for lindane containing real wastewater and higher dechlorination (91% was achieved under optimized reaction conditions.

  1. Two-Phase Flow in Heterogeneous Media

    CERN Document Server

    Ghaffari, Hamed O

    2009-01-01

    In this study, we investigate the appeared complexity of two-phase flow (air-water) in a heterogeneous soil where the supposed porous media is non-deformable media which is under the time-dependent gas pressure. After obtaining of governing equations and considering the capillary pressure-saturation and permeability functions, the evolution of the models unknown parameters were obtained. In this way, using COMSOL (FEMLAB) and fluid flow-script Module, the role of heterogeneity in intrinsic permeability was analysed. Also, the evolution of relative permeability of wetting and non-wetting fluid, capillary pressure and other parameters were elicited.

  2. Study on flooding in two-phase flow

    International Nuclear Information System (INIS)

    In a countercurrent two-phase flow, where gas phase flows in the upward direction against a gravity-driven liquid downflow, the liquid downflow rate begins to be limited when the gas flow rate exceeds a certain threshold value. This phenomenon, termed 'flooding', may occur during a loss-of-coolant accident (LOCA) at such locations in reactor coolant system as steam generator (SG) U-tubes in a pressurized water reactor (PWR). Flooding generally tends to reduce the amount of water available for core cooling in emergency situations. Flooding has been studied for various flow conditions and geometries, in particular for vertical channels. Most of these studies were concerned with those situations where the lower entry of the channel is exposed to the gas phase or a gas-continuous two-phase flow, and scarcely dealt with such situations where the liquid is the continuous phase at the channel lower entry. However, in a PWR small-break LOCA, where the reactor coolant inventory is depleted only slowly, the latter situations would be encountered more frequently than the former. The present study is concerned with flooding in a vertical channel whose lower entry is facing to a liquid-continuous two-phase flow. Experiments were conducted using Freon R-113 as a simulant of high-pressure steam-water two-phase flow. Experimental results indicate that flooding for this situation initiates when the two-phase mixture swell level in the channel, which indicates large fluctuations with time, reaches the channel top entry at the peaks of level fluctuations. It was also found that the flooding correlation developed formerly by the authors for air-water flows can be applied to the present R-113 case if the difference in fluid properties are considered appropriately. (author)

  3. High speed motion neutron radiography of two-phase flow

    International Nuclear Information System (INIS)

    Current research in the area of two-phase flow utilizes a wide variety of sensing devices, but some limitations exist on the information which can be obtained. Neutron radiography is a feasible alternative to ''see'' the two-phase flow. A system to perform neutron radiographic analysis of dynamic events which occur on the order of several milliseconds has been developed at Oregon State University. Two different methods have been used to radiograph the simulated two-phase flow. These are pulsed, or ''flash'' radiography, and high speed movie neutron radiography. The pulsed method serves as a ''snap-shot'' with an exposure time ranging from 10 to 20 milliseconds. In high speed movie radiography, a scintillator is used to convert neutrons into light which is enhanced by an optical intensifier and then photographed by a high speed camera. Both types of radiography utilize the pulsing capability of the OSU TRIGA reactor. The principle difficulty with this type of neutron radiography is the fogging of the image due to the large amount of scattering in the water. This difficulty can be overcome by using thin regions for the two-phase flow or using heavy water instead of light water. The results obtained in this paper demonstrate the feasibility of using neutron radiography to obtain data in two-phase flow situations. Both movies and flash radiographs have been obtained of air bubbles in water and boiling from a heater element. The neutron radiographs of the boiling element show both nucleate boiling and film boiling. (Auth.)

  4. Dynamic failure in two-phase materials

    Science.gov (United States)

    Fensin, S. J.; Walker, E. K.; Cerreta, E. K.; Trujillo, C. P.; Martinez, D. T.; Gray, G. T.

    2015-12-01

    Previous experimental research has shown that microstructural features such as interfaces, inclusions, vacancies, and heterogeneities can all act as void nucleation sites. However, it is not well understood how important these interfaces are to damage evolution and failure as a function of the surrounding parent materials. In this work, we present results on three different polycrystalline materials: (1) Cu, (2) Cu-24 wt. %Ag, and (3) Cu-15 wt. %Nb which were studied to probe the influence of bi-metal interfaces on void nucleation and growth. These materials were chosen due to the range of difference in structure and bulk properties between the two phases. The initial results suggest that when there are significant differences between the bulk properties (for example: stacking fault energy, melting temperature, etc.) the type of interface between the two parent materials does not principally control the damage nucleation and growth process. Rather, it is the "weaker" material that dictates the dynamic spall strength of the overall two-phase material.

  5. Phase appearance or disappearance in two-phase flows

    OpenAIRE

    Cordier, Floraine; Degond, Pierre; Kumbaro, Anela

    2011-01-01

    This paper is devoted to the treatment of specific numerical problems which appear when phase appearance or disappearance occurs in models of two-phase flows. Such models have crucial importance in many industrial areas such as nuclear power plant safety studies. In this paper, two outstanding problems are identified: first, the loss of hyperbolicity of the system when a phase appears or disappears and second, the lack of positivity of standard shock capturing schemes such as the Roe scheme. ...

  6. Design Of A Turgo Two-Phase Turbine Runner

    OpenAIRE

    Aaraj, Youssef; Mortada, Sorina; Clodic, Denis; Nemer, Maroun

    2014-01-01

    A two-phase impulse turbine used to replace the classic expansion valve in a refrigeration system needs a nozzle/expander to transform the flow stored enthalpy into kinetic energy, and a runner that comes afterwards to transform the flow kinetic energy into torque. That process transforms the isenthalpic expansion of the refrigerant into, ideally, an isentropic one. Replacing a classic isenthalpic expansion with a nearly isentropic one increases the cycle cooling capacity by 8% up to 20 % for...

  7. Eutectic Growth in Two-Phase Multicomponent Alloys

    OpenAIRE

    Senninger, Oriane; Voorhees, Peter W.

    2016-01-01

    A theory of two-phase eutectic growth for a multicomponent alloy is presented. This theory employs the thermodynamic equilibrium at the solid/liquid interface and thus makes it possible to use standard CALPHAD databases to determine the effects of multicomponent phase equilibrium on eutectic growth. Using the same hypotheses as the Jackson Hunt theory, we find that the growth law determined for binary alloys in the Jackson Hunt theory can be generalized to systems with N elements. In particul...

  8. Adsorption of phenol from aqueous systems onto spent oil shale

    Energy Technology Data Exchange (ETDEWEB)

    Darwish, N.A.; Halhouli, K.A.; Al-Dhoon, N.M. [Jordan Univ. of Science and Technology, Irbid (Jordan)

    1996-03-01

    To evaluate its ability to remove phenol from aqueous solution, Jordanian {open_quotes}spent{close_quotes} oil shale, an abundant natural resource, has been used in an experimental adsorption study. Equilibrium of the system has been determined at three temperatures: 30, 40, and 55{degrees}C. The resulting experimental equilibrium isotherms are well represented by Frendlich, Langmuir, and Redlich-Peterson isotherms. The relevant parameters for these isotherms, as regressed from the experimental equilibrium data, are presented. Effects of solution pH (in the range of 3-11), in addition to effects of three inorganic salts (Kl, KCl, and NaCl), on the equilibrium isotherms were also investigated. The effects of pH in the presence of KI and NaCl were also investigated for a possible interaction between salts and solution pH. The initial concentration of phenol in the aqueous system studied ranges from 10 to 200 ppm. Experimental results show that while an acidic solution has no effect on the adsorption capacity of spent oil shale to phenol, a highly basic solution reduces its adsorbability. No sound effect was observed for the inorganic salts studied on the adsorption of phenol on spent oil shale. The experimental results show that there is no interaction between the pH of solution and the presence of salts. In spite of its ability to remove phenol, spent oil shale showed a very low equilibrium capacity (of an order of magnitude of 1 mg/g). Should the adsorption capacity of the shale be improved (by different treatment processes, such as grafting, surface conditioning), results of this study will find a direct practical implication in serving as {open_quotes}raw{close_quotes} reference data for comparison purposes.

  9. Radiation-Engineered Functional Nanoparticles in Aqueous Systems.

    Science.gov (United States)

    Dispenza, Clelia; Grimaldi, Natascia; Sabatino, Maria Antonietta; Soroka, Inna L; Jonsson, Mats

    2015-05-01

    Controlled synthesis of nanoscalar and nanostructured materials enables the development of novel functional materials with fine-tuned optical, mechanical, electronic, magnetic, conductive and catalytic properties that are of use in numerous applications. These materials have also found their potential use in medicine as vehicles for drug delivery, in diagnostics or in combinations thereof. In principle, nanoparticles can be divided into two broad categories, organic and inorganic nanoparticles. For both types of nanoparticles there are numerous possible synthetic routes. Considering the large difference in nature of these materials and the elementary reactions involved in the synthetic routes, most manufacturing techniques are complex and only suitable for one type of particle. Interestingly, radiation chemistry, i.e., the use of ionizing radiation from radioisotopes and accelerators to induce nanomaterials or chemical changes in materials, has proven to be a versatile tool for controlled manufacturing of both organic and inorganic nanoparticles. The advantages of using radiation chemistry for this purpose are many, such as low energy consumption, minimal use of potentially harmful chemicals and simple production schemes. For medical applications one more advantage is that the material can be sterile as manufactured. Radiation-induced synthesis can be carried out in aqueous systems, which minimizes the use of organic solvents and the need for separation and purification of the final product. The radiation chemistry of water is well known, as are the various ways of fine-tuning the reactivity of the system towards a desired target by adding different solutes. This, in combination with the controllable and adjustable irradiation process parameters, makes the technique superior to most other chemical methods. In this review, we discuss the fundamentals of radiation chemistry and radiation-induced synthesis of nanoparticles in aqueous solutions. The impact of dose and

  10. DESIGN OF ROBOTIC COLONIZER CONTROL SYSTEM FOR AQUEOUS ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    C.VENKATESH

    2013-05-01

    Full Text Available Now a days there is a huge interest on underwater communication systems for various applications in order to explore aqueous environments. Intelligent robots and cooperative multi- agent robotic systems can be very efficient tools to speed up search and research operations in remote areas. Robots are also useful to do jobs inareas and in situations that are hazardous for human, they can go anywhere that is not reachable my humans and can go into gaps and move trough small holes that are impossible for humans and even trained dogs. in this paper, a wireless underwater mobile robot system is designed in order to study the behavior of artemia group. anew idea has been presented for underwater mobile robot system which is consists of two parts, first is the underwater mechanical robot and the second is ZigBee wireless based mobile robot which controls and moves the first part. by this system different patterns motion control (linear, circular, zigzag, etc. has been performed and proved the ability to control group of robot by controlling the group of artemia and monitoring the underwater mobile robot control with the help of water proof RF wireless camera and also explore the details present around the mobile robot

  11. MHD Generators Operating with Two-Phase Liquid Metal Flows

    International Nuclear Information System (INIS)

    A simplified one- component liquid metal MHD cycle which utilizes two-phase mixtures passing directly through the generator has been proposed and is being studied. Analysis indicates that a nuclear dual-cycle power system utilizing the proposed liquid metal conversion scheme as a topping cycle has overall efficiencies that are comparable to a plasma dual-cycle system at much lower,temperatures. The key to the potential of this cycle is the performance of the MHD generator operating with two-phase mixtures. A large NaK-N2 loop capable of accommodating both d.c. conduction or a.c. induction generators operating with either single-phase or two-phase flows has been built and recently put into operation. Recirculating NaK flow rates up to 200 gal/min and gas flows of 750 ft3/min can be obtained. The efficiency of a generator operating with two-phase flow will depend upon the nature of the flow and the degree to which the total entering liquid flow.interacts with the magnetic field. Because the flow pattern of a two-phase mixture changes from a dispersion of gas in liquid to a dispersion of liquid in gas as the mixture quality is increased, two different types of generators are proposed and are being studied. In the first generator, referred to as a film generator, the two-phase mixture enters at a slight angle to the lower surface of the generator. The liquid is separated by impingement. The high-velocity free surface liquid film that is formed interacts with a transverse magnetic film. The efficiency of this type of generator is a function of the separation ratio, skin friction and momentum losses. A 2 kW version of the generator has been built and is currently being run. Initial tests up to 250 W have been made, which have shown that the generator concept is feasible and that the flow is stable. This generator has run with inlet qualities to 0.05 and magnetic fields up to 12 kG. Measured voltages and amperages have ranged to 0.60 V and 60 A. It is planned to continue

  12. Two-phase fluids in centrifugal separators

    International Nuclear Information System (INIS)

    In nuclear power plants centrifugal separators are often used for the separation of mixtures of gas and liquid. The investigations described in this paper are concerned with flow distributions in such separators or in other apparatus with a two-phase fluid as the working medium. The measuring methods used for the determination of the local parameters of flow are described. Tests of cascades were performed. The profiles had a mean line of an arc of circle and constant thickness. Blades like these are commonly used in separators. Furthermore the results of measurements in the separation zones of separators of the tangential and the axial type are presented. Finally it will be discussed, in as far the data obtained with a mixture of air and water can also be applied to other mixtures. (orig.)

  13. Nodal analysis of two-phase instabilities

    International Nuclear Information System (INIS)

    Nodal models having moving nodal boundaries have been developed for the analysis of two-phase flow instabilities in a boiling channel. The first model, which was based on a Galerkin method for the discretization, has been found to be accurate in the prediction of the onset of instabilities as well as the frequency of oscillations. This model however, had some problems with the prediction of chaotic phenomena and did not allow for flow reversal in the channel. A second nodal model, based on a finite difference approach, has been found to perform better for the prediction of non-linear response and it also allows for flow reversal. Both models are numerically more efficient than the existing fixed grid models for instabilities analysis

  14. Stability of oscillatory two phase Couette flow

    Science.gov (United States)

    Coward, Adrian V.; Papageorgiou, Demetrios T.

    1993-01-01

    We investigate the stability of two phase Couette flow of different liquids bounded between plane parallel plates. One of the plates has a time dependent velocity in its own plane, which is composed of a constant steady part and a time harmonic component. In the absence of time harmonic modulations, the flow can be unstable to an interfacial instability if the viscosities are different and the more viscous fluid occupies the thinner of the two layers. Using Floquet theory, we show analytically in the limit of long waves, that time periodic modulations in the basic flow can have a significant influence on flow stability. In particular, flows which are otherwise unstable for extensive ranges of viscosity ratios, can be stabilized completely by the inclusion of background modulations, a finding that can have useful consequences in many practical applications.

  15. The Condensation effect on the two-phase flow stability

    International Nuclear Information System (INIS)

    A one-dimensional analytical model has been developed to be used for the linear analysis of density-wave oscillations in a parallel heated channel and a natural circulation loop.The heater and the riser sections are divided into a single-phase and a two-phase region.The two-phase region is represented by the drift-flux model. The model accounts for aphasic slip and subcooled boiling.The localized friction at the heater and the riser exit is treated considering the two-phase mixture.Also the effects of the condensation in the riser and the change in the system pressure have been studied.The exact equation for the heated channel and the total loop pressure drop is perturbed around the steady state.he stability characteristics of the heated channel and the loop are investigated using the Root finding method criterion.The results are summarized on instability maps in the plane of subcooled boiling number vs. phase change number (i.e., inlet subcooling vs. heater heat flux).The predictions of the model are compared with experimental results published in open literature. The results show that, the treatment effect of localized friction in two-phase mixtures stabilizes the system and improves the agreement of the calculations with the experimental results.For a parallel heated channel, the results indicate a more stable system with high inlet restriction, low outlet restriction, and high inlet velocity. And for a natural circulation loop, an increase in the inlet restriction broadened the range of the continuous circulation mode and stabilized the system, a decrease in the exit restriction or the liquid charging level shifted to the right the range of the continuous circulation mode and stabilized the system and an increase in the riser condensation shifted to the right the range of the continuous circulation mode and stabilized the system.The results show that the model agrees well with the available experimental data. In particular, the results show the significance of

  16. Mechanisms and kinetic of recrystallisation in two phase alloys

    International Nuclear Information System (INIS)

    Following a brief summary of the classical nucleation models, the various deformations modes of two phase alloys are reviewed in relation with the strain amplitude, strain rate and particle size. Most cases are illustrated by observations made on nickel base superalloys deformed at high temperature. Nucleation and growth processes in two phase alloys have been studied in detail in general systems and their understanding sheds some light on the early stages of the recrystallisation process. The inhibiting effect of small finely dispersed particles is compared to the enhanced nucleation rate observed in the vicinity of large particles in connection with their associated deformation zone. An example of a bimodal distribution of γ' precipitates in a PM nickel base superalloy is presented and its improvement of the mechanical properties is discussed

  17. Cold water injection into two-phase mixtures

    International Nuclear Information System (INIS)

    This report presents the results of a review of the international literature regarding the dynamic loadings associated with the injection of cold water into two-phase mixtures. The review placed emphasis on waterhammer in nuclear power plants. Waterhammmer incidence data were reviewed for information related to thermalhydraulic conditions, underlying causes and consequential damage. Condensation induced waterhammer was found to be the most significant consequence of injecting cold water into a two-phase system. Several severe waterhammer incidents have been attributed to slug formation and steam bubble collapse under conditions of stratified steam and cold water flows. These phenomena are complex and not well understood. The current body of experimental and analytical knowledge is not large enough to establish maps of expected regimes of condensation induced waterhammer. The Electric Power Research Institute, in the United States, has undertaken a major research and development programme to develop the knowledge base for this area. The limited models and data currently available show that mechanical parameters are as important as thermodynamic conditions for the initiation of condensation induced waterhammer. Examples of bounds for avoiding two-phase waterhammer are given. These bounds are system specific and depend upon parameters such as pump capacity, pipe length and pipe orientation

  18. 四相SRM驱动系统两相励磁功率因数校正研究%Power factor correction for 4 phases switched reluctance motors drive system under two-phase excitation

    Institute of Scientific and Technical Information of China (English)

    高洁; 孙鹤旭; 何林; 董砚; 郑易

    2011-01-01

    针对开关磁阻电机传统功率拓扑结构电源侧电流畸变严重,功率因数较低的问题,通过将电容后置,并且增加相应的开关管和二极管,提出一种功率拓扑结构,将其应用于两相励磁条件下的四相SRM进行功率因数校正.对该功率拓扑结构及其电容补偿方案进行了机理分析,基于Matlab/SIMULINK构建了四相开关磁阻电机驱动系统两相导通模式功率因数校正拓扑结构模型,对开关磁阻电机电压、电流、转矩等进行了全面仿真研究,验证了所提出方案的可行性及有效性.仿真结果表明,该拓扑结构不但可以改善系统的功率因数,并且减小了因电源波动引起的转矩脉动,优化了电机的起动性能,提高了效率.%In traditional power topological structure of Switched Reluctance Motor (SRM) , for the serious current distortion in power supply side and its result in the low power factor, by the use of the rear capacitance and increase the corresponding switch tube and diode, a new topological structure was presented, and was applied in traditional structure for power factor correction (PFC). The mechanism of new power topological structure and the capacitor compensation schemes were analyzed, four phases Switched Reluctance Motor Drive (SRD) system power factor correction topology structure with two phase conduction mode was modeling based on MATLAB/SIMULINK, and a comprehensive simulation study of SRM voltage, current, torque, etc. Was analyzed. It verifies the effectiveness and the feasibility the proposed scheme. The simulation results show that the topology structure can not only improve the power factor of system and reduce the torque ripple caused by power fluctuating, the motor starting performance is optimized and the system efficiency is improved.

  19. Monodisperse PEGylated spheres: an aqueous colloidal model system.

    Science.gov (United States)

    Ulama, Jeanette; Zackrisson Oskolkova, Malin; Bergenholtz, Johan

    2014-03-01

    Fluorinated core-shell spheres have been synthesized using a novel semibatch emulsion polymerization protocol employing slow feeding of the initiator. The synthesis results in aqueous dispersions of highly monodisperse spheres bearing a well-defined poly(ethylene glycol) graft (PEGylation). Measurements are consistent with the synthesis achieving a high grafting density that moreover consists of a single PEG layer with the polymer significantly elongated beyond its radius of gyration in bulk. The fluorination of the core of the particles confers a low index of refraction such that the particles can be refractive index matched in water through addition of relatively small amounts of a cosolvent, which enables the use of optical and laser-based methods for studies of concentrated systems. The systems exhibit an extreme stability in NaCl solutions, but attractions among particles can be introduced by addition of other salts, in which case aggregation is shown to be reversible. The PEGylated sphere dispersions are expected to be ideally suited as model systems for studies of the effect of PEG-mediated interactions on, for instance, structure, dynamics, phase behavior, and rheology. PMID:24533774

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT; ULTRASONIC AQUEOUS CLEANING SYSTEMS, SMART SONIC CORPORATION, SMART SONIC

    Science.gov (United States)

    This report is a product of the U.S. EPA's Environmental Technoloy Verification (ETV) Program and is focused on the Smart Sonics Ultrasonic Aqueous Cleaning Systems. The verification is based on three main objectives. (1) The Smart Sonic Aqueous Cleaning Systems, Model 2000 and...

  1. Fluid dynamics of cryogenic two-phase flows

    International Nuclear Information System (INIS)

    The objective of this study was to examine the flow behavior of a methane hydrate/methane-liquid hydrogen dispersed two-phase fluid through a given design of a moderator chamber for the ESS target system. The calculations under simplified conditions, e.g., taking no account of heat input from outside, have shown that the computer code used, CFX, was able to simulate the behavior of the two-phase flow through the moderator chamber, producing reasonable results up to a certain level of the solid phase fraction, that allowed a continuous flow process through the chamber. Inlet flows with larger solid phase fractions than 40 vol% were found to be a ''problem'' for the computer code. From the computer runs based on fractions between 20 and 40 vol%, it was observed that with increasing solid phase fraction at the inlet, the resulting flow pattern revealed a strong tendency for blockage within the chamber, supported by the ''heavy weight'' of the pellets compared to the carrying liquid. Locations which are prone to the development of such uneven flow behavior are the areas around the turning points in the semispheres and near the exit of the moderator. The considered moderator chamber with horizontal inlet and outlet flow for a solid-liquid two-phase fluid does not seem to be an appropriate design. (orig.)

  2. Reticulation of Aqueous Polyurethane Systems Controlled by DSC Method

    Directory of Open Access Journals (Sweden)

    Jakov Stamenkovic

    2006-06-01

    Full Text Available The DSC method has been employed to monitor the kinetics of reticulation ofaqueous polyurethane systems without catalysts, and with the commercial catalyst of zirconium(CAT®XC-6212 and the highly selective manganese catalyst, the complex Mn(III-diacetylacetonemaleinate (MAM. Among the polyol components, the acrylic emulsions wereused for reticulation in this research, and as suitable reticulation agents the water emulsiblealiphatic polyisocyanates based on hexamethylendoisocyanate with the different contents ofNCO-groups were employed. On the basis of DSC analysis, applying the methods of Kissinger,Freeman-Carroll and Crane-Ellerstein the pseudo kinetic parameters of the reticulation reactionof aqueous systems were determined. The temperature of the examination ranged from 50oC to450oC with the heat rate of 0.5oC/min. The reduction of the activation energy and the increaseof the standard deviation indicate the catalytic action of the selective catalysts of zirconium andmanganese. The impact of the catalysts on the reduction of the activation energy is thestrongest when using the catalysts of manganese and applying all the three afore-said methods.The least aberrations among the stated methods in defining the kinetic parameters wereobtained by using the manganese catalyst.

  3. Condensation in a two-phase pool

    International Nuclear Information System (INIS)

    We consider the case of vapor condensation in a liquid pool, when the heat transfer is controlled by heat losses through the walls. The analysis is based on drift flux theory for phase separation in the pool, and determines the two-phase mixture height for the pool. To our knowledge this is the first analytical treatment of this classic problem that gives an explicit result, previous work having established the result for the evaporative case. From conservation of mass and energy in a one-dimensional steady flow, together with a void relation between the liquid and vapor fluxes, we determine the increase in the mixture level from the base level of the pool. It can be seen that the thermal and hydrodynamic influences are separable. Thus, the thermal influence of the wall heat transfer appears through its effect on the condensing length L*, so that at high condensation rates the pool is all liquid, and at low rates overflows (the level swell or foaming effect). Similarly, the phase separation effect hydrodynamically determines the height via the relative velocity of the mixture to the entering flux. We examine some practical applications of this result to level swell in condensing flows, and also examine some limits in ideal cases

  4. Numerical calculation of two-phase flows

    International Nuclear Information System (INIS)

    The theoretical study of time-varying two-phase flow problems in several space dimensions introduces such a complicated set of coupled nonlinear partial differential equations that numerical solution procedures for high-speed computers are required in almost all but the simplest examples. Efficient attainment of realistic solutions for practical problems requires a finite- difference formulation that is simultaneously implicit in the treatment of mass convection, equations of state, and the momentum coupling between phases. Such a method is described, the equations on which it is based are discussed, and its properties are illustrated by means of examples. In particular, the capability for calculating physical instabilities and other time-varying dynamics, at the same time avoiding numerical instability is emphasized. The computer code is applicable to problems in reactor safety analysis, the dynamics of fluidized dust beds, raindrops or aerosol transport, and a variety of similar circumstances, including the effects of phase transitions and the release of latent heat or chemical energy. (U.S.)

  5. Two phase simulation of ultrarelativistic nuclear collisions

    International Nuclear Information System (INIS)

    A two phase cascade is presented for ultrahigh energy ion-ion collisions from √(s)=17 - 200GeV. First a high-energy cascade is performed, in which original baryons and any freed hard partons collide. This stage ignores energy loss from soft processes. In this first version no hard processes, aside from Drell-Yan production, are included. The space-time history of the hard cascade is used to reconstruct the soft energy loss. Soft meson production is treated as coherent over groups of interacting nucleons. Two body data, though, are used to guide this reconstruction. A second, low-energy cascade is then carried out. The model selected to describe elementary hadron-hadron collisions in the soft cascade incorporates generic mesons and baryons as the agents for rescattering. We imagine a constituent quark model applies, with generic mesons consisting of an excited q bar q pair, and generic baryons constructed from three quarks. The chief result is a reconciliation of the important Drell-Yan measurements, indicating high-mass lepton pairs are produced as if no energy is lost from the nucleons, with the apparent success of a purely hadronic, soft cascade in describing nucleon stopping and meson production in heavy ion experiments at the CERN SPS. The LUCIFER II code may be downloaded under the GNU General Public License from http://bnlnth.phy.bnl.gov/. copyright 1998 The American Physical Society

  6. Two phase simulation of ultrarelativistic nuclear collisions

    Energy Technology Data Exchange (ETDEWEB)

    Kahana, S.H. [Physics Department, Brookhaven National Laboratory, Upton, New York 11973 (United States)] Kahana, D.E. [Physics Department, State University of New York at Stony Brook, Stony Brook, New York 11791 (United States)

    1998-12-01

    A two phase cascade is presented for ultrahigh energy ion-ion collisions from {radical}(s)=17{endash}200thinspGeV. First a high-energy cascade is performed, in which original baryons and any freed hard partons collide. This stage ignores energy loss from soft processes. In this first version no hard processes, aside from Drell-Yan production, are included. The space-time history of the hard cascade is used to reconstruct the soft energy loss. Soft meson production is treated as coherent over groups of interacting nucleons. Two body data, though, are used to guide this reconstruction. A second, low-energy cascade is then carried out. The model selected to describe elementary hadron-hadron collisions in the soft cascade incorporates generic mesons and baryons as the agents for rescattering. We imagine a constituent quark model applies, with generic mesons consisting of an excited q{bar q} pair, and generic baryons constructed from three quarks. The chief result is a reconciliation of the important Drell-Yan measurements, indicating high-mass lepton pairs are produced {ital as if no energy is lost from the nucleons}, with the apparent success of a purely hadronic, soft cascade in describing nucleon stopping and meson production in heavy ion experiments at the CERN SPS. The LUCIFER II code may be downloaded under the GNU General Public License from http://bnlnth.phy.bnl.gov/. {copyright} {ital 1998} {ital The American Physical Society}

  7. Design and construction of two phases flow meter

    International Nuclear Information System (INIS)

    This paper deals with design of the gamma ray correlometer and flow loop system for measuring the velocity between two parallel cross-sections of a pipeline. In the laboratory, the radioisotope source and detector were collimated by brass with small beam slit respectively. The flow loop system consists of transparent pipeline, adjustable frequency pump and water container. As a result, when the construction of the flow loop and correlometer is completed, the velocity of two phases flow can be measured by the cross-correlation techniques. (Author)

  8. Ostwald ripening in two-phase mixtures

    International Nuclear Information System (INIS)

    Experimental measurements of the temperature of a rapidly solidified solid-liquid mixture have been made over a range of volume fractions solid 0.23 to 0.95. These experiments demonstrate the viability of measuring the change in interfacial curvature with time via precision thermometry. The experimental measurements also indicate that there is no radical change in interface morphology over a wide range of volume fractions solid. A solution to the multi-particle diffusion problem (MDP) has been constructed through the use of potential theory. The solution to the MDP was used to describe the diffusion field within a coarsening two-phase mixture consisting of dispersed spherical second-phase particles. Since this theory is based upon the MDP, interparticle diffusional interactions are specifically included in the treatment. As a result, the theory yields, for the first time, insights into the influence of the local distribution of curvature on a particle's coarsening rate. The effect of interparticle interactions on the collective behavior of an ensemble of coarsening particles was also investigated. It was found that any arbitrary distribution of particle radii will tend to a specific time independent distribution when the particle radii are scaled by the average particle radius. Furthermore, it was determined that with increasing volume fraction of coarsening phase, these time independent distributions become broader and more symmetric. It was also found that the ripening kinetics, as measured by the growth rate of the average particle size, increases by a factor of five upon increasing the volume fraction of coarsening phase from zero to 0.5

  9. Research on network model of gas-liquid two-phase

    International Nuclear Information System (INIS)

    A general modeling approach of the two-phase flow network system is studied. Based on the homogeneous phase model, a model of non-loss and mean friction two-phase flow network model and parameter-impedance and admittance are given. The advice to the non-homogeneous phase model is given

  10. Investigation of Power Losses of Two-Stage Two-Phase Converter with Two-Phase Motor

    Directory of Open Access Journals (Sweden)

    Michal Prazenica

    2011-01-01

    Full Text Available The paper deals with determination of losses of two-stage power electronic system with two-phase variable orthogonal output. The simulation is focused on the investigation of losses in the converter during one period in steady-state operation. Modeling and simulation of two matrix converters with R-L load is shown in the paper. The simulation results confirm a very good time-waveform of the phase current and the system seems to be suitable for low-cost application in automotive/aerospace industries and in application with high frequency voltage sources.

  11. Vapor Compressor Driven Hybrid Two-Phase Loop Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will demonstrate a vapor compressor driven hybrid two-phase loop technology. The hybrid two-phase loop...

  12. 气液混输悬链线立管系统两相流特性实验%EXPERIMENTS ON TWO-PHASE FLOW CHARACTERISTICS IN A CATENARY RISER SYSTEM WITH THE GAS AND LIQUID MIXTURE TRANSPORTATION

    Institute of Scientific and Technical Information of China (English)

    高嵩; 李巍; 尤云祥; 俞忠; 胡天群

    2012-01-01

    Severe slugging is an undesirable flow phenomenon for a pipline-riser system with the gas-liquid mixture transportation in ocean engineering. In present paper experiments were performed for the two-phase flow characteristics in a horizontal/declination pipeline-catenary riser system with the gas-liquid mixture transportation, and flow patterns were identified by series combinations of gas and liquid superficial velocities, including severe slug, intermittent and oscillation flows. The formation mechanisms of these flow patterns were presented and the conditions where the severe slug flow can be produced in the catenary riser were obtained. The results show that the severe slug flow in a catenary riser has remarkably periodic characteristics and consists of four stages in a circle, including slug formation, slug production, slug blowout and liquid fallback, respectively, where the characteristics of the flow parameters in each stage were given. Moreover, the formation mechanisms of severe slug flows in both catenary and vertical risers were compared and analyzed, and a remarkable differenti- ation in the slug formation stages for the two types of risers was observed, where the formation procedure of a mixture liquid slug with both gas and liquid first occurs before the pure liquid slug in the catenary riser can be produced, however, there is no occurrence of such a procedure of the mixture liquid slug for the vertical riser.%严重段塞流是海洋工程气液混输管线-立管系统中常见的一种特殊有害流动现象,采用水平-下倾-悬链线立管气液混输组合管道系统,通过系列实验在悬链线立管中获得了严重段塞流、间歇流和震荡流等流型,阐述了这些流动现象的形成机理,提出了能够产生严重段塞流的判定准则.结果表明,悬链线立管严重段塞流具有明显周期性,在一个周期内的流动特征可分为液塞形成、液体出流、液气喷发及液体回流等4个阶段,进而给

  13. Spectral Optical Coherence Tomography Using Two-Phase Shifting Method

    Institute of Scientific and Technical Information of China (English)

    MA Zhen-He; Ruikang K. Wang; ZHANG Fan; YAO Jian-Quan

    2005-01-01

    @@ A two-phase shifting method is introduced to eliminate the strong autocorrelation noise inherent in spectral optical coherence tomography and to mitigate the unwanted auto- and cross-coherent terms introduced by the reflections from various optical interfaces present in the system. Furthermore, this method is also able to amplify the desired signal by a factor of 2. The feasibility of such a method is demonstrated using a mirror-like object. An intact porcine cornea tissue in vitro is also used to show the potential of this method for biological imaging.

  14. Modeling transient two-phase stratified flow in pipelines

    International Nuclear Information System (INIS)

    An isothermal, two-fluid model, comprised of separate mass and linear momentum conservation equations for the gas and liquid phases was formulated. Interfacial mass transfer effects were modeled via the black oil method. Both equal and unequal phase pressure formulations were evaluated. The model was used to investigate transient two-phase stratified flow in pipelines. An explicit numerical scheme was used to solve the system of equations. Experimental data were collected in an existing 425 m long, 76.2 mm diameter horizontal pipeline. Good agreement was observed between experimental and predicted results

  15. Experimental and numerical investigation on two-phase flow instabilities

    Energy Technology Data Exchange (ETDEWEB)

    Ruspini, Leonardo Carlos

    2013-03-01

    Two-phase flow instabilities are experimentally and numerically studied within this thesis. In particular, the phenomena called Ledinegg instability, density wave oscillations and pressure drop oscillations are investigated. The most important investigations regarding the occurrence of two-phase flow instabilities are reviewed. An extensive description of the main contributions in the experimental and analytical research is presented. In addition, a critical discussion and recommendations for future investigations are presented. A numerical framework using a hp-adaptive method is developed in order to solve the conservation equations modelling general thermo-hydraulic systems. A natural convection problem is analysed numerically in order to test the numerical solver. Moreover, the description of an adaptive strategy to solve thermo-hydraulic problems is presented. In the second part of this dissertation, a homogeneous model is used to study Ledinegg, density wave and pressure drop oscillations phenomena numerically. The dynamic characteristics of the Ledinegg (flow excursion) phenomenon are analysed through the simulation of several transient examples. In addition, density wave instabilities in boiling and condensing systems are investigated. The effects of several parameters, such as the fluid inertia and compressibility volumes, on the stability limits of Ledinegg and density wave instabilities are studied, showing a strong influence of these parameters. Moreover, the phenomenon called pressure drop oscillations is numerically investigated. A discussion of the physical representation of several models is presented with reference to the obtained numerical results. Finally, the influence of different parameters on these phenomena is analysed. In the last part, an experimental investigation of these phenomena is presented. The designing methodology used for the construction of the experimental facility is described. Several simulations and a non

  16. Experimental study of two-phase natural circulation circuit

    International Nuclear Information System (INIS)

    This paper reports an experimental study on the behavior of fluid flow in natural circulation under single-and two-phase flow conditions. The natural circulation circuit was designed based on concepts of similarity and scale in proportion to the actual operating conditions of a nuclear reactor. This test equipment has similar performance to the passive system for removal of residual heat presents in Advanced Pressurized Water Reactors (A PWR). The experiment was carried out by supplying water to primary and secondary circuits, as well as electrical power resistors installed inside the heater. Power controller has available to adjust the values for supply of electrical power resistors, in order to simulate conditions of decay of power from the nuclear reactor in steady state. Data acquisition system allows the measurement and control of the temperature at different points by means of thermocouples installed at several points along the circuit. The behavior of the phenomenon of natural circulation was monitored by a software with graphical interface, showing the evolution of temperature measurement points and the results stored in digital format spreadsheets. Besides, the natural circulation flow rate was measured by a flowmeter installed on the hot leg. A flow visualization technique was used the for identifying vertical flow regimes of two-phase natural circulation. Finally, the Reynolds Number was calculated for the establishment of a friction factor correlation dependent on the scale geometrical length, height and diameter of the pipe. (author)

  17. A real two-phase submarine debris flow and tsunami

    Energy Technology Data Exchange (ETDEWEB)

    Pudasaini, Shiva P.; Miller, Stephen A. [Department of Geodynamics and Geophysics, Steinmann Institute, University of Bonn Nussallee 8, D-53115, Bonn (Germany)

    2012-09-26

    The general two-phase debris flow model proposed by Pudasaini is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model, which includes three fundamentally new and dominant physical aspects such as enhanced viscous stress, virtual mass, and generalized drag (in addition to buoyancy), constitutes the most generalized two-phase flow model to date. The advantage of this two-phase debris flow model over classical single-phase, or quasi-two-phase models, is that the initial mass can be divided into several parts by appropriately considering the solid volume fraction. These parts include a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This innovative formulation provides an opportunity, within a single framework, to simultaneously simulate the sliding debris (or landslide), the water lake or ocean, the debris impact at the lake or ocean, the tsunami generation and propagation, the mixing and separation between the solid and fluid phases, and the sediment transport and deposition process in the bathymetric surface. Applications of this model include (a) sediment transport on hill slopes, river streams, hydraulic channels (e.g., hydropower dams and plants); lakes, fjords, coastal lines, and aquatic ecology; and (b) submarine debris impact and the rupture of fiber optic, submarine cables and pipelines along the ocean floor, and damage to offshore drilling platforms. Numerical simulations reveal that the dynamics of debris impact induced tsunamis in mountain lakes or oceans are fundamentally different than the tsunami generated by pure rock avalanches and landslides. The analysis includes the generation, amplification and propagation of super tsunami waves and run-ups along coastlines, debris slide and deposition at the bottom floor, and debris shock waves. It is observed that the

  18. A real two-phase submarine debris flow and tsunami

    International Nuclear Information System (INIS)

    The general two-phase debris flow model proposed by Pudasaini is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model, which includes three fundamentally new and dominant physical aspects such as enhanced viscous stress, virtual mass, and generalized drag (in addition to buoyancy), constitutes the most generalized two-phase flow model to date. The advantage of this two-phase debris flow model over classical single-phase, or quasi-two-phase models, is that the initial mass can be divided into several parts by appropriately considering the solid volume fraction. These parts include a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This innovative formulation provides an opportunity, within a single framework, to simultaneously simulate the sliding debris (or landslide), the water lake or ocean, the debris impact at the lake or ocean, the tsunami generation and propagation, the mixing and separation between the solid and fluid phases, and the sediment transport and deposition process in the bathymetric surface. Applications of this model include (a) sediment transport on hill slopes, river streams, hydraulic channels (e.g., hydropower dams and plants); lakes, fjords, coastal lines, and aquatic ecology; and (b) submarine debris impact and the rupture of fiber optic, submarine cables and pipelines along the ocean floor, and damage to offshore drilling platforms. Numerical simulations reveal that the dynamics of debris impact induced tsunamis in mountain lakes or oceans are fundamentally different than the tsunami generated by pure rock avalanches and landslides. The analysis includes the generation, amplification and propagation of super tsunami waves and run-ups along coastlines, debris slide and deposition at the bottom floor, and debris shock waves. It is observed that the

  19. A real two-phase submarine debris flow and tsunami

    Science.gov (United States)

    Pudasaini, Shiva P.; Miller, Stephen A.

    2012-09-01

    The general two-phase debris flow model proposed by Pudasaini [1] is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model, which includes three fundamentally new and dominant physical aspects such as enhanced viscous stress, virtual mass, and generalized drag (in addition to buoyancy), constitutes the most generalized two-phase flow model to date. The advantage of this two-phase debris flow model over classical single-phase, or quasi-two-phase models, is that the initial mass can be divided into several parts by appropriately considering the solid volume fraction. These parts include a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This innovative formulation provides an opportunity, within a single framework, to simultaneously simulate the sliding debris (or landslide), the water lake or ocean, the debris impact at the lake or ocean, the tsunami generation and propagation, the mixing and separation between the solid and fluid phases, and the sediment transport and deposition process in the bathymetric surface. Applications of this model include (a) sediment transport on hill slopes, river streams, hydraulic channels (e.g., hydropower dams and plants); lakes, fjords, coastal lines, and aquatic ecology; and (b) submarine debris impact and the rupture of fiber optic, submarine cables and pipelines along the ocean floor, and damage to offshore drilling platforms. Numerical simulations reveal that the dynamics of debris impact induced tsunamis in mountain lakes or oceans are fundamentally different than the tsunami generated by pure rock avalanches and landslides. The analysis includes the generation, amplification and propagation of super tsunami waves and run-ups along coastlines, debris slide and deposition at the bottom floor, and debris shock waves. It is observed that the

  20. Unsteady interfacial coupling of two-phase flow models

    International Nuclear Information System (INIS)

    The primary coolant circuit in a nuclear power plant contains several distinct components (vessel, core, pipes,...). For all components, specific codes based on the discretization of partial differential equations have already been developed. In order to obtain simulations for the whole circuit, the interfacial coupling of these codes is required. The approach examined within this work consists in coupling codes by providing unsteady information through the coupling interface. The numerical technique relies on the use of an interface model, which is combined with the basic strategy that was introduced by Greenberg and Leroux in order to compute approximations of steady solutions of non-homogeneous hyperbolic systems. Three different coupling cases have been examined: (i) the coupling of a one-dimensional Euler system with a two-dimensional Euler system; (ii) the coupling of two distinct homogeneous two-phase flow models; (iii) the coupling of a four-equation homogeneous model with the standard two-fluid model. (author)

  1. Study on Two-Phase Flow in Heterogeneous Porous Media by Light Transmission Method

    Science.gov (United States)

    Qiao, W.

    2015-12-01

    The non-aqueous phase liquid (NAPL) released to the subsurface can form residual ganglia and globules occupying pores and also accumulate and form pools, in which multiphase system forms. Determining transient fluid saturations in a multiphase system is essential to understand the flow characteristics of systems and to perform effective remediation strategies. As a non-destructive and non-invasive laboratory technique utilized for the measurement of liquid saturation in porous media, light transmission is of the lowest cost and safe. Utilization of Coupled Charge Device camera in light transmission systems provides a nearly instantaneous high-density array of spatial measurements over a very large dynamic range. The migration of NAPL and air spariging technique applied to remove NAPL in aquifer systems are typically two-phase flow problem. Because of the natural aquifer normally being heterogeneous, two 2-D sandboxes (Length55cm×width1.3cm×hight45cm) are set up to study the migration of gas and DNAPL in heterogeneous porous media based on light transmission method and its application in two-phase flow. Model D for water/gas system developed by Niemet and Selker (2001) and Model NW-A for water/NAPL system developed by Zhang et al. (2014) are applied for the calculation of fluid saturation in the two experiments, respectively. The gas injection experiments show that the gas moves upward in the irregular channels, piling up beneath the low permeability lenses and starting lateral movement. Bypassing the lenses, the gas moves upward and forms continuous distribution in the top of the sandbox. The faster of gas injects, the wider of gas migration will be. The DNAPL infiltration experiment shows that TCE mainly moves downward as the influence of gravity, stopping vertical infiltration when reaching the low permeability lenses because of its failure to overcome the capillary pressure. Then, TCE accumulates on the surface and starts transverse movement. Bypassing the

  2. Selection of Xenobiotic-Degrading Microorganisms in a Biphasic Aqueous-Organic System

    OpenAIRE

    Ascon-Cabrera, Miguel; Lebeault, Jean-Michel

    1993-01-01

    Microbial selection on mixtures of chlorinated and nonchlorinated compounds that are poorly soluble in water and/or toxic to growing microbial cells was examined in both biphasic aqueous-organic and monophasic aqueous systems. A biphasic system in which silicone oil was used as the organic phase permitted the acceleration of acclimation, leading to rapid selection and to an increase in xenobiotic compound degradation. In contrast, acclimation, selection, and degradation were very slow in the ...

  3. Thermal non equilibrium in two phase flow

    International Nuclear Information System (INIS)

    Twenty eight reports presented in the 7th Eurotherm seminar are contained in this publication. They cover the main aspects of the thermodynamics in relation to nuclear systems or having reference to them

  4. Characteristics of spatiotemporal intermittency in two phase flows

    International Nuclear Information System (INIS)

    The characteristics of temporal and spatiotemporal intermittent, or slug flow, in two phase flashing flows are analyzed in the context of intermittency transition to chaos. Particularly, the possibility of occurence of generic intermittency routes (Types I, II and III) is investigated in the presence of density wave instability in the system and conclusive evidence for the occurrence of Types I and III is presented. Particularly important is the prediction of the mean slug length and the slug length distribution since the slug flow represents an unfavorable flow regime for gas-liquid transportation in pipes. Identification of two generic intermittency routes automatically gives a quantitative prediction concerning the length distribution of laminar and turbulent (slug) phases. Spatiotemporal analysis, based on the bi-othogonal decoposition and concepts from information theory, provides quantitative characterization and prediction of slug flows and possible mechanism of transition from spatiotemporal intermittency to spatiotemporal chaos (turbulence) is outlined. The analysis of the intermittency in two-phase flows was performed on the experimental data obtained in the study of natural circulation instabilities during small break loss-of-coolant accident. 7 refs., 14 figs

  5. Intermittent phenomena in the boiling two-phase boundary layer

    International Nuclear Information System (INIS)

    In order to investigate statistical properties of temperature fluctuation in a boiling two-phase boundary layer the corresponding intermittency functions, which describe liquid, vapour and interface region at an individual fixed point, have been defined. In water boiling on a horizontal surface the temperature fluctuation was measured with a microthermocouple and the signal was processed through the digital computer with the detector function specified for liquid, vapor and interface region. The results obtained confirm that the temperature fluctuation in the boiling two-phase layer can be divided into three parts corresponding to individual regions and that its statistical distribution depends on the properties of respective systems. It has also been shown that the temperature fluctuation in the interface region is determinative and corresponds to the temperature changes in the liquid layer surrounding vapor bubble growth. Amplitude distribution in the liquid region changes its form with the distance from the wall as a result of the change in intensity of turbulence at different distances. The probability density distribution in the vapor region shows very small amplitude fluctuation and is almost constant for all distances. (author)

  6. Phase behaviour of tertiary recovery sulfonates - petroleum fractions - aqueous systems

    Energy Technology Data Exchange (ETDEWEB)

    Ghoniem, S.A.; Darwish, T.A.; Salamah, A.O.

    1988-02-01

    The phase behaviour of tertiary recovery sulfonates having commercial names TRS-10, TRS-16 and TRS-40 with aqueous phase and light petroleum fractions (non polar kerosene and gasoline) was studied at 20, 40 and 60/sup 0/C. The adopted pseudo components of the ternary diagram are hydrocarbon, surfactant and aqueous phase. The aqueous phase was composed of bidistilled water in addition to different proportions of pure alcohols and sodium chloride. The tested alcohols included methanol, ethanol, iso-propanol, n-butanol and n-pentanol. Thus, the best alcohol type and concentration in addition to optimum salinity, which correspond to maximum single phase region, were established for each surfactant at the various tested temperatures. It was shown that higher the affinity of the tested surfactant for hydrocarbon phase, the greater is the solubility of the corresponding optimum co-surfactant in water. The variation of optimum alcohol concentration with temperature, the effect of salt on the single phase region and the effect of hydrocarbon phase on the observed phenomena were discussed and found to agree with the previously established theories.

  7. Flooding in counter-current two-phase flow

    International Nuclear Information System (INIS)

    Flooding is a phenomenon which is best described as the transition from counter-current to co-current flow. Early notice was taken of this phenomenon in the chemical engineering industry. Flooding also plays an important role in the field of two-phase heat transfer since it is a limit for many systems involving counter-current flow. Practical applications of flooding limited processes include wickless thermosyphons and the emergency core cooling system (ECCS) of pressurized water nuclear reactors. The phenomenon of flooding also is involved in the behavior of nuclear reactor core materials during severe accident conditions where flooding is one of the mechanisms governing the motion of the molten fuel pin cladding

  8. Treatment of substituted phenol mixtures in single phase and two-phase solid-liquid partitioning bioreactors

    Energy Technology Data Exchange (ETDEWEB)

    Tomei, M. Concetta, E-mail: tomei@irsa.cnr.it [Water Research Institute, C.N.R., Via Salaria km 29.300, 00015 Monterotondo Scalo (Rome) (Italy); Rita, Sara; Angelucci, Domenica Mosca [Water Research Institute, C.N.R., Via Salaria km 29.300, 00015 Monterotondo Scalo (Rome) (Italy); Annesini, M. Cristina [Department of Chemical Engineering Materials and Environment, Sapienza University of Rome, Via Eudossiana 18, 00184 Rome (Italy); Daugulis, Andrew J. [Department of Chemical Engineering, Queen' s University, Kingston, Ontario, K7L 3N6 (Canada)

    2011-07-15

    Highlights: {yields} We investigate the biodegradation of a phenolic mixture (2,4-dimethylphenol and 4-nitrophenol). {yields} We identify an effective polymer to absorb these substrates. {yields} We utilize the polymer in a Two Phase Partitioning Bioreactor (TPPB) to overcome cytotoxicity. {yields} The polymer-based TPPB significantly out-performs a single phase system. {yields} The re-release of the substrates at differing rates (based on the partition coefficients) affects the process kinetics. - Abstract: The biological treatment of phenolics is constrained by the inherent cytotoxicity of these compounds. One method to alleviate such toxicity is to add a sequestering phase to absorb, and subsequently release, the substrate(s) to the micro-organisms; such a system is termed a Two Phase Partitioning Bioreactor. Here we have compared the performance of a TPPB, relative to single phase operation, in which a small volume (5%, v/v) of beads of the polymer Hytrel 8206 was used to treat aqueous mixtures of 2,4-dimethylphenol and 4-nitrophenol. Hytrel 8206 was selected from a range of polymers that were tested for their partition coefficients (PCs) for the target molecules, with the more hydrophobic compound (2,4-dimethylphenol) having a higher PC value (201) than 4-nitrophenol (143). Significantly increased removal rates for both substrates were demonstrated in TPPB mode relative to single phase operation. Additionally, the differential release of the compounds to the aqueous phase and their distinct PC values changed the kinetic pattern of the biotreatment system, smoothing out the cellular oxygen demand. Release of the substrates by the polymer over 60 operating cycles was virtually complete (>97%) demonstrating the reusability and robustness of the use of polymers in overcoming cytotoxicity of phenolic substrates.

  9. Treatment of substituted phenol mixtures in single phase and two-phase solid-liquid partitioning bioreactors

    International Nuclear Information System (INIS)

    Highlights: → We investigate the biodegradation of a phenolic mixture (2,4-dimethylphenol and 4-nitrophenol). → We identify an effective polymer to absorb these substrates. → We utilize the polymer in a Two Phase Partitioning Bioreactor (TPPB) to overcome cytotoxicity. → The polymer-based TPPB significantly out-performs a single phase system. → The re-release of the substrates at differing rates (based on the partition coefficients) affects the process kinetics. - Abstract: The biological treatment of phenolics is constrained by the inherent cytotoxicity of these compounds. One method to alleviate such toxicity is to add a sequestering phase to absorb, and subsequently release, the substrate(s) to the micro-organisms; such a system is termed a Two Phase Partitioning Bioreactor. Here we have compared the performance of a TPPB, relative to single phase operation, in which a small volume (5%, v/v) of beads of the polymer Hytrel 8206 was used to treat aqueous mixtures of 2,4-dimethylphenol and 4-nitrophenol. Hytrel 8206 was selected from a range of polymers that were tested for their partition coefficients (PCs) for the target molecules, with the more hydrophobic compound (2,4-dimethylphenol) having a higher PC value (201) than 4-nitrophenol (143). Significantly increased removal rates for both substrates were demonstrated in TPPB mode relative to single phase operation. Additionally, the differential release of the compounds to the aqueous phase and their distinct PC values changed the kinetic pattern of the biotreatment system, smoothing out the cellular oxygen demand. Release of the substrates by the polymer over 60 operating cycles was virtually complete (>97%) demonstrating the reusability and robustness of the use of polymers in overcoming cytotoxicity of phenolic substrates.

  10. New concept of analytical method for two-phase flow

    International Nuclear Information System (INIS)

    The authors are developing a new analytical method for vertical upward two-phase flow based on a concept that two-phase flow with minimum pressure energy consumption rate is the most stable and easily flowable two-phase flow for the given boundary conditions and, thus, such two-phase flow should be realized actually. Although this concept is applied basically one-dimensionally in the analytical method, gravity convection effect due to density difference between liquid film on the channel wall and two-phase flow core in the central region of the channel is taken into account through a two-dimensional turbulent flow analysis. An air-water two-phase flow experiment was performed to verify the proposed analytical method. In the present paper, results of the experimental analysis with the proposed method are reported. (author)

  11. A bi-directional two-phase/two-phase heat exchanger

    Science.gov (United States)

    Ku, Jentung; Ottenstein, Laura

    1993-01-01

    This paper describes the design and test of a heat exchanger that transfers heat from one two-phase thermal loop to another with very small drops in temperature and pressure. The heat exchanger condenses the vapor in one loop while evaporating the liquid in the other without mixing of the condensing and evaporating fluids. The heat exchanger is bidirectional in that it can transfer heat in reverse, condensing on the normally evaporating side and vice versa. It is fully compatible with capillary pumped loops and mechanically pumped loops. Test results verified that performance of the heat exchanger met the design requirements. It demonstrated a heat transfer rate of 6800 watts in the normal mode of operation and 1000 watts in the reverse mode with temperature drops of less than 5 C between two thermal loops.

  12. Two phase flow arising in hydraulics

    Czech Academy of Sciences Publication Activity Database

    Straškraba, Ivan

    2015-01-01

    Roč. 60, č. 1 (2015), s. 21-33. ISSN 0862-7940 R&D Projects: GA ČR GA201/08/0012 Institutional support: RVO:67985840 Keywords : compressible fluid * Navier-Stokes equations * hydraulic systems Subject RIV: BA - General Mathematics Impact factor: 0.400, year: 2014 http://link.springer.com/article/10.1007/s10492-015-0083-9

  13. Extraction of Biomolecules Using Phosphonium-Based Ionic Liquids + K3PO4 Aqueous Biphasic Systems

    OpenAIRE

    Louros, Cláudia L. S.; Cláudio, Ana Filipa M.; Neves, Catarina M. S. S.; Freire, Mara G.; Marrucho, Isabel M.; Jérôme Pauly; Coutinho, João A. P.

    2010-01-01

    Aqueous biphasic systems (ABS) provide an alternative and efficient approach for the extraction, recovery and purification of biomolecules through their partitioning between two liquid aqueous phases. In this work, the ability of hydrophilic phosphonium-based ionic liquids (ILs) to form ABS with aqueous K3PO4 solutions was evaluated for the first time. Ternary phase diagrams, and respective tie-lines and tie-lines length, formed by distinct phosphonium-based ILs, water, and K3PO4 at 298 K, we...

  14. Inhibition Effect of Mace Extract Microemulsion on Vitamin C Photooxidation in Aqueous Systems

    Directory of Open Access Journals (Sweden)

    Hasbullah Hasbullah

    2014-01-01

    Full Text Available Photooxidation in food systems cause nutritional losses and produces undesirable flavor, toxic and color compounds, which make foods less acceptable or unacceptable to consumers. The objective of this research was to know the effectiveness of mace extract microemulsion to inhibit vitamin C photooxidation in aqueous systems. Aqueous food systems used are both beverage model system and apple juice beverage, where in each system enriched by 100 ppm vitamin C as substrate and 20 ppm erytrosin as photosensitiser. It is about one percent and two percent of microemulsion that contain mace extract of 0, 500 and 750 ppm were added into each of aqueous food system. Inhibition effect of mace extract microemulsion toward vitamin C photooxidation based on the rate of vitamin C degradation in aqueous food systems that illuminated by fluorescent light with 2000 lux intensity within eight hours. The result indicated the mace extract microemulsion has anti-photooxidation activity and ability to inhibit vitamin C photooxidation in aqueous systems.

  15. Radiation formation of colloidal silver particles in aqueous systems

    Energy Technology Data Exchange (ETDEWEB)

    Cuba, Vaclav [CTU in Prague, Faculty of Nuclear Sciences and Physical Engineering, Brehova 7, 115 19 Prague 1 (Czech Republic)], E-mail: vaclav.cuba@fjfi.cvut.cz; Nemec, Mojmir; Gbur, Tomas; John, Jan; Pospisil, Milan; Mucka, Viliam [CTU in Prague, Faculty of Nuclear Sciences and Physical Engineering, Brehova 7, 115 19 Prague 1 (Czech Republic)

    2010-04-15

    This paper reports on the formation of silver nanoparticles initiated by gamma and UV radiation in various aqueous solutions. Inorganic precursors were used for radiation and/or photochemical reduction of Ag{sup +} ions to a metallic form. The influence of various parameters on the nucleation and formation of colloid particles was studied. Attention was also focused on the composition of the irradiated solution. Aliphatic alcohols were used as scavengers of OH radicals and other oxidizing species. The influence of the stabilizers on the formation and stability of the nanoparticles was studied.

  16. Thirty-two phase sequences design with good autocorrelation properties

    Indian Academy of Sciences (India)

    S P Singh; K Subba Rao

    2010-02-01

    Polyphase Barker Sequences are finite length, uniform complex sequences; the magnitude of their aperiodic autocorrelation sidelobes are bounded by 1. Such sequences have been used in numerous real-world applications such as channel estimation, radar and spread spectrum communication. In this paper, thirty-two phase Barker sequences up to length 24 with an alphabet size of only 32 are presented. The sequences from length 25 to 289 have autocorrelation properties better than well-known Frank codes. Because of the complex structure the sequences are very difficult to detect and analyse by an enemy’s electronic support measures (ESMs). The synthesized sequences are promising for practical application to radar and spread spectrum communication systems. These sequences are found using the Modified Simulated Annealing Algorithm (MSAA). The convergence rate of the algorithm is good.

  17. Phase appearance or disappearance in two-phase flows

    CERN Document Server

    Cordier, Floraine; Kumbaro, Anela

    2011-01-01

    This paper is devoted to the treatment of specific numerical problems which appear when phase appearance or disappearance occurs in models of two-phase flows. Such models have crucial importance in many industrial areas such as nuclear power plant safety studies. In this paper, two outstanding problems are identified: first, the loss of hyperbolicity of the system when a phase appears or disappears and second, the lack of positivity of standard shock capturing schemes such as the Roe scheme. After an asymptotic study of the model, this paper proposes accurate and robust numerical methods adapted to the simulation of phase appearance or disappearance. Polynomial solvers are developed to avoid the use of eigenvectors which are needed in usual shock capturing schemes, and a method based on an adaptive numerical diffusion is designed to treat the positivity problems. An alternate method, based on the use of the hyperbolic tangent function instead of a polynomial, is also considered. Numerical results are presente...

  18. Equations of two-phase flow in spray chamber

    Institute of Scientific and Technical Information of China (English)

    李新禹; 张志红; 金星; 徐杰

    2009-01-01

    The downstream water-air heat and moisture transfer system in a moving coordinate was studied. The relationship between the diameter of the misted droplets and the spray pressure was determined. Based on the theory of the relative velocity,the two-phase flow mode of the spray chamber and the efficiency equation for heat and moisture exchange were established. Corrections were carried out for the efficiency equation with spray pressure of 157 kPa. The results show that the pressure plays an important part in determining the efficiency of heat and moisture exchange. When the spray pressure is less than 157 kPa,better coincidence is noticed between the theoretical analysis and the test results with the error less than 6%. Greater error will be resulted in the case when the spray pressure is beyond 157 kPa. After the correction treatment,the coincidence between the theoretical and the experimental results is greatly improved.

  19. On the performance limit of closed two-phase thermosiphons

    International Nuclear Information System (INIS)

    This paper discusses an experiment conducted to investigate the performance limit of closed two-phase thermosiphons, together with visual observations of the flow state in the adiabatic section. The working fluids were R-113, methanol, and water. The flow state at the performance limit conditions was a violently disturbed slug type, in which the vapor plugs held up the liquid slugs periodically to a high level, causing a local circulation of liquid in the adiabatic section. This phenomenon is somewhat different from the flooding observed in open systems. An equation correlating the vapor velocity at the performance limit to the rising velocity of vapor plugs in stagnant liquid columns is proposed. This correlation compares satisfactorily with the performance limit data covering a wide range of parameters

  20. Dynamics Coefficient for Two-Phase Soil Model

    Directory of Open Access Journals (Sweden)

    Wrana Bogumił

    2015-02-01

    Full Text Available The paper investigates a description of energy dissipation within saturated soils-diffusion of pore-water. Soils are assumed to be two-phase poro-elastic materials, the grain skeleton of which exhibits no irreversible behavior or structural hysteretic damping. Description of motion and deformation of soil is introduced as a system of equations consisting of governing dynamic consolidation equations based on Biot theory. Selected constitutive and kinematic relations for small strains and rotation are used. This paper derives a closed form of analytical solution that characterizes the energy dissipation during steady-state vibrations of nearly and fully saturated poro-elastic columns. Moreover, the paper examines the influence of various physical factors on the fundamental period, maximum amplitude and the fraction of critical damping of the Biot column. Also the so-called dynamic coefficient which shows amplification or attenuation of dynamic response is considered.

  1. Mathematical model of two-phase flow in accelerator channel

    Directory of Open Access Journals (Sweden)

    О.Ф. Нікулін

    2010-01-01

    Full Text Available  The problem of  two-phase flow composed of energy-carrier phase (Newtonian liquid and solid fine-dispersed phase (particles in counter jet mill accelerator channel is considered. The mathematical model bases goes on the supposition that the phases interact with each other like independent substances by means of aerodynamics’ forces in conditions of adiabatic flow. The mathematical model in the form of system of differential equations of order 11 is represented. Derivations of equations by base physical principles for cross-section-averaged quantity are produced. The mathematical model can be used for estimation of any kinematic and thermodynamic flow characteristics for purposely parameters optimization problem solving and transfer functions determination, that take place in  counter jet mill accelerator channel design.

  2. Two-phase flow and heat transfer under low gravity

    Science.gov (United States)

    Frost, W.

    1981-11-01

    Spacelab experiment to investigate two-phase flow patterns under gravity uses a water-air mixture experiment. Air and water are circulated through the system. The quality or the mixture or air-water is controlled. Photographs of the test section are made and at the same time pressure drop across the test section is measured. The data establishes a flow regime map under reduced gravity conditions with corresponding pressure drop correlations. The test section is also equipped with an electrical resistance heater in order to allow a flow boiling experiment to be carried out using Freon II. High-speed photographs of the test section are used to determine flow patterns. The temperature gradient and pressure drop along the duct can be measured. Thus, quality change can be measured, and heat transfer calculated.

  3. Two phase flow models in DxUNSp code platform

    Directory of Open Access Journals (Sweden)

    Catalin NAE

    2011-09-01

    Full Text Available The aim of this work is to find an efficient implementation for a two phase flow model in an existing URANS CFD code platform (DxUNSp, initially based on unsteady URANS equations with a k- turbulence model and various other extensions, ranging from a broad selection of wall laws up to a very efficient LES model. This code has the capability for development for nonreacting/reacting multifluid flows for research applications and is under continuous progress. It is intend to present mainly three aspects of this implementation for unstructured mesh based solvers, for high Reynolds compressible flows: the importance of the 5/7 equation model, performance with respect to a basic test cases and implementation details of the proposed schemes. From a numerical point of view, we propose a new approximation schemes of this system based on the VFRoe-ncv.

  4. Stability of stratified two-phase flows in horizontal channels

    CERN Document Server

    Barmak, Ilya; Ullmann, Amos; Brauner, Neima; Vitoshkin, Helen

    2016-01-01

    Linear stability of stratified two-phase flows in horizontal channels to arbitrary wavenumber disturbances is studied. The problem is reduced to Orr-Sommerfeld equations for the stream function disturbances, defined in each sublayer and coupled via boundary conditions that account also for possible interface deformation and capillary forces. Applying the Chebyshev collocation method, the equations and interface boundary conditions are reduced to the generalized eigenvalue problems solved by standard means of numerical linear algebra for the entire spectrum of eigenvalues and the associated eigenvectors. Some additional conclusions concerning the instability nature are derived from the most unstable perturbation patterns. The results are summarized in the form of stability maps showing the operational conditions at which a stratified-smooth flow pattern is stable. It is found that for gas-liquid and liquid-liquid systems the stratified flow with smooth interface is stable only in confined zone of relatively lo...

  5. Correct numerical simulation of a two-phase coolant

    Science.gov (United States)

    Kroshilin, A. E.; Kroshilin, V. E.

    2016-02-01

    Different models used in calculating flows of a two-phase coolant are analyzed. A system of differential equations describing the flow is presented; the hyperbolicity and stability of stationary solutions of the system is studied. The correctness of the Cauchy problem is considered. The models' ability to describe the following flows is analyzed: stable bubble and gas-droplet flows; stable flow with a level such that the bubble and gas-droplet flows are observed under and above it, respectively; and propagation of a perturbation of the phase concentration for the bubble and gas-droplet media. The solution of the problem about the breakdown of an arbitrary discontinuity has been constructed. Characteristic times of the development of an instability at different parameters of the flow are presented. Conditions at which the instability does not make it possible to perform the calculation are determined. The Riemann invariants for the nonlinear problem under consideration have been constructed. Numerical calculations have been performed for different conditions. The influence of viscosity on the structure of the discontinuity front is studied. Advantages of divergent equations are demonstrated. It is proven that a model used in almost all known investigating thermohydraulic programs, both in Russia and abroad, has significant disadvantages; in particular, it can lead to unstable solutions, which makes it necessary to introduce smoothing mechanisms and a very small step for describing regimes with a level. This does not allow one to use efficient numerical schemes for calculating the flow of two-phase currents. A possible model free from the abovementioned disadvantages is proposed.

  6. Construction of the two-phase critical flow test facility

    International Nuclear Information System (INIS)

    The two-phase critical test loop facility has been constructed in the KAERI engineering laboratory for the simulation of small break loss of coolant accident entrained with non-condensible gas of SMART. The test facility can operate at 12 MPa of pressure and 0 to 60 C of sub-cooling with 0.5 kg/s of non- condensible gas injection into break flow, and simulate up to 20 mm of pipe break. Main components of the test facility were arranged such that the pressure vessel containing coolant, a test section simulating break and a suppression tank inter-connected with pipings were installed vertically. As quick opening valve opens, high pressure/temperature coolant flows through the test section forming critical two-phase flow into the suppression tank. The pressure vessel was connected to two high pressure N2 gas tanks through a control valve to control pressure in the pressure vessel. Another N2 gas tank was also connected to the test section for the non-condensible gas injection. The test facility operation was performed on computers supported with PLC systems installed in the control room, and test data such as temperature, break flow rate, pressure drop across test section, gas injection flow rate were all together gathered in the data acquisition system for further data analysis. This test facility was classified as a safety related high pressure gas facility in law. Thus the loop design documentation was reviewed, and inspected during construction of the test loop by the regulatory body. And the regulatory body issued permission for the operation of the test facility

  7. Two-phase flow and heat transfer symposium-workshop. Proceedings of condensed papers

    International Nuclear Information System (INIS)

    Two-phase flow applications are found in a wide range of engineering systems, such as boiling water reactors, conventional steam boilers, evaporators of refrigeration systems, and evaporative and condensive heat exchangers in chemical and petroleum industries. Over the past two decades, two-phase flow instability problems have been a challenge to many investigators. Such instabilities could induce boiling crisis, disturb control systems and/or cause mechanical damage. It is important to be able to predict the conditions under which a two-phase flow system will perform without instability. Therefore, the understanding of two-phase flow phenomena is extremely important for the design, control and performance prediction of such systems. Because of the recent energy crisis, many other two-phase flow problems have also become important. Some of them are the modeling of the loss of coolant accident in pressurized water nuclear reactors, scaling up of fluidized bed reactors for converting coal to clean gaseous and liquid fuels, and design of heat exchangers for liquified natural gas, and design of heat exchangers for liquified natural gas. There is a need to provide researchers and engineers in this field with an opportunity to exchange their experience and ideas in order to assess the state-of-the-art of two-phase flow and heat transfer studies, and to establish a basis for identification of areas of future research and application. This symposium provides the latest information on the status of two-phase flow and heat transfer research, development and applications. It also establish a rational basis for identification of areas of two-phase flow and heat transfer for further research and application

  8. Two Phases of Coherent Structure Motions in Turbulent Boundary Layer

    Institute of Scientific and Technical Information of China (English)

    LIU Jian-Hua; JIANG Nan

    2007-01-01

    Two phases of coherent structure motion are acquired after obtaining conditional phase-averaged waveforms for longitudinal velocity of coherent structures in turbulent boundary layer based on Harr wavelet transfer. The correspondences of the two phases to the two processes (i.e. ejection and sweep) during a burst are determined.

  9. Two-phase flow characterisation by nuclear magnetic resonance

    International Nuclear Information System (INIS)

    The results presented in this paper demonstrate the performance of the PFGSE-NMR to obtain a complete characterisation of two-phase flows. Different methods are proposed to characterise air-water flows in different regimes: stationary two-phase flows and flows in transient condition. Finally a modified PFGSE is proposed to analyse the turbulence of air-water bubbly flow. (author)

  10. Personal view of educating two-phase flow and human resource development as a nuclear engineer

    International Nuclear Information System (INIS)

    As an engineer who has devoted himself in the nuclear industry for almost three decades, the author gave a personal view on educating two-phase flow and developing human resources. An expected role of universities in on-going discussions of collaboration among industry-government-academia is introduced. Reformation of two-phase flow education is discussed from two extreme viewpoints, the basic structure of physics and the practical system analysis. (author)

  11. Mineralogic controls on aqueous neptunium(V) concentrations in silicate systems

    International Nuclear Information System (INIS)

    The presence of radioactive neptunium in commercially spent nuclear fuel is problematic due to its mobility in environmental systems upon oxidation to the pentavalent state. As uranium is the major component of spent fuel, incorporation of neptunium into resulting U(VI) mineral phases would potentially influence its release into environmental systems. Alternatively, aqueous neptunium concentrations may be buffered by solid phase Np2O5. In this study, we investigate both of these controls on aqueous neptunium(V) concentrations. We synthesize two uranyl silicates, soddyite, (UO2)2SiO4·2H2O, and boltwoodite, (K, Na)(UO2)(SiO3OH)·1.5H2O, each in the presence of two concentrations of aqueous Np(V). Electron microscopy and electron diffraction analyses of the synthesized phases show that while significant neptunyl incorporation occurred into soddyite, the Np(V) in the boltwoodite systems largely precipitated as a secondary phase, Np2O5(s). The release of Np(V) from each system into aqueous solution was measured for several days, until steady-state concentrations were achieved. Using existing solubility constants (Ksp) for pure soddyite and boltwoodite, we compared predicted equilibrium aqueous U(VI) concentrations with the U(VI) concentrations released in the solubility experiments. Our experiments reveal that Np(V) incorporation into soddyite increases the concentration of aqueous U in equilibrium with the solid phase, perhaps via the formation of a metastable phase. In the mixed boltwoodite – Np2O5(s) system, the measured aqueous U(VI) activities are consistent with those predicted to be in equilibrium with boltwoodite under the experimental conditions, a result that is consistent with our conclusion that little Np(V) incorporation occurred into the boltwoodite. In the boltwoodite systems, the measured Np concentrations are likely controlled by the presence of Np2O5 nanoparticles, suggesting an additional potential mobility vector for Np in geologic systems. Our

  12. Monitoring corrosion and chemistry phenomena in supercritical aqueous systems

    International Nuclear Information System (INIS)

    The in situ monitoring of the chemistry and electrochemistry of aqueous heat transport fluids in thermal (nuclear and fossil) power plants is now considered essential if adequate assessment and close control of corrosion and mass transfer phenomena are to be achieved. Because of the elevated temperatures and pressures involved. new sensor technologies are required that are able to measure key parameters under plant operating conditions for extended periods of time. In this paper, the authors outline a research and development program that is designed to develop practical sensors for use in thermal power plants. The current emphasis is on sensors for measuring corrosion potential, pH, the concentrations of oxygen and hydrogen, and the electrochemical noise generated by corrosion processes at temperatures ranging from ∼250 C to 500 C. The program is currently at the laboratory stage, but testing of prototype sensors in a coal-fired supercritical power plant in Spain will begin shortly

  13. Hybrid dynamic modeling for two phase flow condensers

    International Nuclear Information System (INIS)

    In this paper, a hybrid modeling approach is proposed to describe the dynamic behavior of the two phase flow condensers used in air-conditioning and refrigeration systems. The model is formulated based on fundamental energy and mass balance governing equations, and thermodynamic principles, while some constants and less important variables that change very little during normal operation, such as cross-sectional areas, mean void fraction, the derivative of the saturation enthalpy with respect to pressure, etc., are lumped into several unknown parameters. These parameters are then obtained by experimental data using least squares identification method. The proposed modeling method takes advantages of both physical and empirical modeling approaches, can accurately predict the transient behaviors in real-time and significantly reduce the computational burden. Other merits of the proposed approach are that the order of the model is very low and all the state variables can be easily measured. These advantages make it easy to be applied to model based control system design. The model validation studies on an experimental system show that the model predicts the system dynamic well. -- Highlights: • A hybrid modeling approach is proposed to describe the dynamic behavior of condensers. • This modeling approach balances the trade-offs between complexity and accuracy. • The model order is very low and all the state variables are available for measurement. • The model validation studies show that the model predicts the system dynamic well. • The model is suitable for dynamic analysis and model-based controller design

  14. Structural developments of turbulent two-phase flow in large pipes

    International Nuclear Information System (INIS)

    In connection with the thermohydraulic problems of two-phase flow that may be encountered under certain operating conditions in piping systems containing heat sources and sinks such as a CANDU reactor heat transport system, this study investigates some of the turbulent characteristics of both cocurrent air-water two-phase flow and single phase flow in large pipes with horizontal orientation. Pitot tubes together with hot film anemometry have been shown to be an adequate measurement system in turbulent dispersed two-phase flow. A practical semi-empirical formula has been developed to predict local mixture velocity as a function of differential head read by Pitot tube, local void fraction, flow pattern constant, gas-liquid properties, momentum transfer factor and two-phase flow quality. The structural developments of the dispersed mixture velocity was studied along a straight horizontal PVC run and expressed in terms of the radial distance and the pipeline length. A correlation is introduced to determine the local mixture velocity in terms of radial and streamwise distance, two-phase flow quality, gas and liquid densities. A similar correlation is presented to predict the local developments of the void fraction. In addition to those normalized correlations, hypothetical interpretations of the experienced phenonema are presented. It was found that the mixture velocity is significantly influenced by the volumetric mixing ratio of both phases. Conclusions are drawn in the special cases of turbulent single and two-phase flow

  15. Tsunami Generated by a Two-Phase Submarine Debris Flow

    Science.gov (United States)

    Pudasaini, S. P.

    2012-04-01

    The general two-phase debris flow model proposed by Pudasaini (2011) is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model includes several essential physical aspects, including Mohr-Coulomb plasticity for the solid stress, while the fluid stress is modelled as a solid volume fraction gradient enhanced non-Newtonian viscous stress. The generalized interfacial momentum transfer includes the viscous drag, buoyancy, and the virtual mass. The generalized drag covers both the solid-like and fluid-like contributions, and can be applied to linear to quadratic drags. Strong couplings exist between the solid and the fluid momentum transfer. The advantage of the real two-phase debris flow model over classical single-phase or quasi-two-phase models is that by considering the solid (and/or the fluid) volume fraction appropriately, the initial mass can be divided into several (even mutually disjoint) parts; a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This offers a unique and innovative opportunity within a single framework to simultaneously simulate (a) the sliding debris (or landslide), (b) the water lake or ocean, (c) the debris impact at the lake or ocean, (d) tsunami generation and propagation, (e) mixing and separation between the solid and the fluid phases, and (f) sediment transport and deposition process in the bathymetric surface. The new model is applied to two-phase subaerial and submarine debris flows. Benchmark numerical simulations reveal that the dynamics of the debris impact induced tsunamis are fundamentally different than the tsunami generated by pure rock avalanche and landslides. Special attention is paid to study the basic features of the debris impact to the mountain lakes or oceans. This includes the generation, amplification and propagation of the multiple

  16. Study on two-phase flow dynamics in steam injectors

    International Nuclear Information System (INIS)

    Analytical and experimental studies have been conducted on large-scale steam injectors for a next-generation reactor. The steam injectors are simple, compact, passive steam jet pumps for a steam-injector-driven passive core injection system (SI-PCIS) or steam-injector-driven primary loop recirculation system (SI-PLR). In order to check the feasibility of such large-scale steam injectors, we developed the separate-two-phase flow models installed in the PHOENICS Code, and scale-model tests were conducted for both SI-PCIS and SI-PLR. A 1/2 scale SI-PCIS model achieved a discharge pressure of almost 8 MPa with 7 MPa steam and 0.4 MPa water, and a 1/5 scale SI-PLR model attained a discharge pressure of 12.5 MPa with 3 MPa steam and 7 MPa water. Both results are in good agreement with the analysis, confirming the feasibility of both systems. The systems will help to simplify the next generation of BWRs. (author)

  17. Development of gas-liquid two-phase flow interfacial structure in a confined bubbly flow

    International Nuclear Information System (INIS)

    In gas-liquid two-phase flow systems, the interfacial structure specifies the geometric capability of the interfacial transfer of mass, momentum, and energy between the two phases. In view of this, extensive experiments have been carried out in an air-water upward two-phase flow through a test section of 20-cm in width and 1-cm in gap. In it, the local two-phase flow parameters were acquired by the double-sensor conductivity probe at three different elevations in a wide range of the bubbly flow conditions. The acquired local parameters include void fraction ( α), interfacial area concentration (ai), bubble velocity (Ub), bubble Sauter mean diameter (Dsm) and bubble frequency. By taking advantage of the transparent two-dimensional flow path, the flow regime map was constructed through flow visualization. Examination of the measured parameters reveals the development of the interfacial structure due to bubble interactions. (author)

  18. Research of Characteristics of Gas-liquid Two-phase Pressure Drop in Microreactor

    Directory of Open Access Journals (Sweden)

    Li Dan

    2015-01-01

    Full Text Available With the research system of nitrogen and deionized water, this paper researches the pressure drop of gas-liquid two-phase flow in the circular microchannel with an inner diameter which is respectively 0.9mm and 0.5mm, analyzes the effect of microchannel diameter on gas-liquid two-phase frictional pressure drop in the microchannel reactor, and compares with the result of frictional pressure drop and the predicting result of divided-phase flow pattern. The result shows that, the gas-liquid two-phase frictional pressure drop in the microchannel significantly increases with the decreasing microchannel diameter; Lockhart-Martinelli relationship in divided-phase flow pattern can preferably predict the gas-liquid two-phase frictional pressure drop in the microchannel, but the Tabular constant needs to be corrected.

  19. Two-phase gas bubble-liquid boundary layer flow along vertical and inclined surfaces

    International Nuclear Information System (INIS)

    The behavior of a two-phase gas bubble-liquid boundary layer along vertical and inclined porous surfaces with uniform gas injection is investigated experimentally and analytically. Using argon gas and water as the working fluids, a photographical study of the two-phase boundary layer flow has been performed for various angles of inclination ranging from 450 to 1350 and gas injection rates ranging from 0.01 to 0.1 m/s. An integral method has been employed to solve the system of equations governing the two-phase motion. The effects of the gas injection rate and the angle of inclination on the growth of the boundary layer have been determined. The predicted boundary layer thickness is found to be in good agreement with the experimental results. The calculated axial liquid velocity and the void fraction in the two-phase region are also presented along with the observed flow behavior

  20. Research on one-dimensional two-phase flow

    International Nuclear Information System (INIS)

    In Part I the fundamental form of the hydrodynamic basic equations for a one-dimensional two-phase flow (two-fluid model) is described. Discussions are concentrated on the treatment of phase change inertial force terms in the equations of motion and the author's equations of motion which have a remarkable uniqueness on the following three points. (1) To express force balance of unit mass two-phase fluid instead of that of unit volume two-phase fluid. (2) To pick up the unit existing mass and the unit flowing mass as the unit mass of two-phase fluid. (3) To apply the kinetic energy principle instead of the momentum low in the evaluation of steady inertial force term. In these three, the item (1) is for excluding a part of momentum change or kinetic energy change due to mass change of the examined part of fluid, which is independent of force. The item (2) is not to introduce a phenomenological physical model into the evaluation of phase change inertial force term. And the item (3) is for correctly applying the momentum law taking into account the difference of representative velocities between the main flow fluid (vapor phase or liquid phase) and the phase change part of fluid. In Part II, characteristics of various kinds of high speed two-phase flow are clarified theoretically by the basic equations derived. It is demonstrated that the steam-water two-phase critical flow with violent flashing and the airwater two-phase critical flow without phase change can be described with fundamentally the same basic equations. Furthermore, by comparing the experimental data from the two-phase critical discharge test and the theoretical prediction, the two-phase discharge coefficient, CD, for large sharp-edged orifice is determined as the value which is not affected by the experimental facility characteristics, etc. (author)

  1. Two-phase-flow models and their limitations

    International Nuclear Information System (INIS)

    An accurate prediction of transient two-phase flow is essential to safety analyses of nuclear reactors under accident conditions. The fluid flow and heat transfer encountered are often extremely complex due to the reactor geometry and occurrence of transient two-phase flow. Recently considerable progresses in understanding and predicting these phenomena have been made by a combination of rigorous model development, advanced computational techniques, and a number of small and large scale supporting experiments. In view of their essential importance, the foundation of various two-phase-flow models and their limitations are discussed in this paper

  2. What types of investors generate the two-phase phenomenon?

    Science.gov (United States)

    Ryu, Doojin

    2013-12-01

    We examine the two-phase phenomenon described by Plerou, Gopikrishnan, and Stanley (2003) [1] in the KOSPI 200 options market, one of the most liquid options markets in the world. By analysing a unique intraday dataset that contains information about investor type for each trade and quote, we find that the two-phase phenomenon is generated primarily by domestic individual investors, who are generally considered to be uninformed and noisy traders. In contrast, our empirical results indicate that trades by foreign institutions, who are generally considered informed and sophisticated investors, do not exhibit two-phase behaviour.

  3. Tunable two-phase coexistence in half-doped manganites

    Indian Academy of Sciences (India)

    P Chaddah; A Banerjee

    2008-02-01

    We discuss our very interesting experimental observation that the low-temperature two-phase coexistence in half-doped manganites is multi-valued (at any field) in that we can tune the coexisting antiferromagnetic-insulating (AF-I) and the ferromagnetic-metallic (FM-M) phase fractions by following different paths in (; ) space. We have shown experimentally that the phase fraction, in this two-phase coexistence, can take continuous infinity of values. All but one of these are metastable, and two-phase coexistence is not an equilibrium state.

  4. Passive Two-Phase Cooling of Automotive Power Electronics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, G.; Jeffers, J. R.; Narumanchi, S.; Bennion, K.

    2014-08-01

    Experiments were conducted to evaluate the use of a passive two-phase cooling strategy as a means of cooling automotive power electronics. The proposed cooling approach utilizes an indirect cooling configuration to alleviate some reliability concerns and to allow the use of conventional power modules. An inverter-scale proof-of-concept cooling system was fabricated, and tests were conducted using the refrigerants hydrofluoroolefin HFO-1234yf and hydrofluorocarbon HFC-245fa. Results demonstrated that the system can dissipate at least 3.5 kW of heat with 250 cm3 of HFC-245fa. An advanced evaporator design that incorporates features to improve performance and reduce size was conceived. Simulation results indicate its thermal resistance can be 37% to 48% lower than automotive dual side cooled power modules. Tests were also conducted to measure the thermal performance of two air-cooled condensers--plain and rifled finned tube designs. The results combined with some analysis were then used to estimate the required condenser size per operating conditions and maximum allowable system (i.e., vapor and liquid) temperatures.

  5. Simulation of two-phase flows by domain decomposition

    International Nuclear Information System (INIS)

    This thesis deals with numerical simulations of compressible fluid flows by implicit finite volume methods. Firstly, we studied and implemented an implicit version of the Roe scheme for compressible single-phase and two-phase flows. Thanks to Newton method for solving nonlinear systems, our schemes are conservative. Unfortunately, the resolution of nonlinear systems is very expensive. It is therefore essential to use an efficient algorithm to solve these systems. For large size matrices, we often use iterative methods whose convergence depends on the spectrum. We have studied the spectrum of the linear system and proposed a strategy, called Scaling, to improve the condition number of the matrix. Combined with the classical ILU pre-conditioner, our strategy has reduced significantly the GMRES iterations for local systems and the computation time. We also show some satisfactory results for low Mach-number flows using the implicit centered scheme. We then studied and implemented a domain decomposition method for compressible fluid flows. We have proposed a new interface variable which makes the Schur complement method easy to build and allows us to treat diffusion terms. Using GMRES iterative solver rather than Richardson for the interface system also provides a better performance compared to other methods. We can also decompose the computational domain into any number of sub-domains. Moreover, the Scaling strategy for the interface system has improved the condition number of the matrix and reduced the number of GMRES iterations. In comparison with the classical distributed computing, we have shown that our method is more robust and efficient. (author)

  6. Two-phase repository construction concept: Engineering feasibility study

    International Nuclear Information System (INIS)

    As part of the Conceptual Design of a High Level Nuclear Waste Repository in Salt, and Engineering Feasibility Study was performed to evaluate the validity of the proposed two-phase repository construction concept as described in the Mission Plan. As a result of this study, the two-phase repository construction concept can be considered valid. The uncertainty associated with the site-related permitting and licensing process remains the major element of risk to the program schedule. With the application of the two-phase approach, surface and subsurface construction activities can be removed from the critical path. For this study, the Davis Canyon, Utah site was used. The study includes preliminary designs of the two-phase repository, surface and subsurface layouts, an overall integrated schedule, and cost estimates and evaluations regarding schedule and technical issues. 4 refs., 19 figs., 21 tabs

  7. Transient two-phase performance of LOFT reactor coolant pumps

    International Nuclear Information System (INIS)

    Performance characteristics of Loss-of-Fluid Test (LOFT) reactor coolant pumps under transient two-phase flow conditions were obtained based on the analysis of two large and small break loss-of-coolant experiments conducted at the LOFT facility. Emphasis is placed on the evaluation of the transient two-phase flow effects on the LOFT reactor coolant pump performance during the first quadrant operation. The measured pump characteristics are presented as functions of pump void fraction which was determined based on the measured density. The calculated pump characteristics such as pump head, torque (or hydraulic torque), and efficiency are also determined as functions of pump void fractions. The importance of accurate modeling of the reactor coolant pump performance under two-phase conditions is addressed. The analytical pump model, currently used in most reactor analysis codes to predict transient two-phase pump behavior, is assessed

  8. Vapor Compressor Driven Hybrid Two-Phase Loop Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase I project successfully demonstrated the feasibility of the vapor compression hybrid two-phase loop (VCHTPL). The test results showed the high...

  9. Refrigeration. Two-Phase Flow. Flow Regimes and Pressure Drop

    DEFF Research Database (Denmark)

    Knudsen, Hans-Jørgen Høgaard

    2002-01-01

    The note gives the basic definitions used in two-phase flow. Flow regimes and flow regimes map are introduced. The different contributions to the pressure drop are stated together with an imperical correlation from the litterature....

  10. Gravity Independence of Microchannel Two-Phase Flow Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Most of the amassed two-phase flow and heat transfer knowledge comes from experiments conducted in Earth’s gravity. Space missions span varying gravity...

  11. Application of non-equilibrium thermodynamics to two-phase flows with a change of phase

    International Nuclear Information System (INIS)

    In this report we use the methods of non-equilibrium thermodynamics in two-phase flows. This paper follows a prior one in which we have studied the conservation laws and derived the general equations of two-phase flow. In the first part the basic ideas of thermodynamics of irreversible systems are given. We follow the classical point of view. The second part is concerned with the derivation of a closed set of equations for the two phase elementary volume model. In this model we assume that the elementary volume contains two phases and that it is possible to define a volumetric local concentration. To obtain the entropy balance we can choose either the reversibility of the barycentric motion or the reversibility of each phase. We adopt the last assumption and our derivation is the same as this of I.Prigogine and P. Mazur about the hydrodynamics of liquid helium. The scope of this work is not to find a general solution to the problems of two phase flows but to obtain a new set of equations which may be used to explain some characteristic phenomena of two-phase flow such as wave propagation or critical states. (author)

  12. Mixed Model for Silt-Laden Solid-Liquid Two-Phase Flows

    Institute of Scientific and Technical Information of China (English)

    唐学林; 徐宇; 吴玉林

    2003-01-01

    The kinetic theory of molecular gases was used to derive the governing equations for dense solid-liquid two-phase flows from a microscopic flow characteristics viewpoint by multiplying the Boltzmann equation for each phase by property parameters and integrating over the velocity space. The particle collision term was derived from microscopic terms by comparison with dilute two-phase flow but with consideration of the collisions between particles for dense two-phase flow conditions and by assuming that the particle-phase velocity distribution obeys the Maxwell equations. Appropriate terms from the dilute two-phase governing equations were combined with the dense particle collision term to develop the governing equations for dense solid-liquid turbulent flows. The SIMPLEC algorithm and a staggered grid system were used to solve the discretized two-phase governing equations with a Reynolds averaged turbulence model. Dense solid-liquid turbulent two-phase flows were simulated for flow in a duct. The simulation results agree well with experimental data.

  13. IMPROVED SUBGRID SCALE MODEL FOR DENSE TURBULENT SOLID-LIQUID TWO-PHASE FLOWS

    Institute of Scientific and Technical Information of China (English)

    TANG Xuelin; QIAN Zhongdong; WU Yulin

    2004-01-01

    The dense solid-phase governing equations for two-phase flows are obtained by using the kinetic theory of gas molecules. Assuming that the solid-phase velocity distributions obey the Maxwell equations, the collision term for particles under dense two-phase flow conditions is also derived.In comparison with the governing equations of a dilute two-phase flow, the solid-particle's governing equations are developed for a dense turbulent solid-liquid flow by adopting some relevant terms from the dilute two-phase governing equations. Based on Cauchy-Helmholtz theorem and Smagorinsky model,a second-order dynamic sub-grid-scale (SGS) model, in which the sub-grid-scale stress is a function of both the strain-rate tensor and the rotation-rate tensor, is proposed to model the two-phase governing equations by applying dimension analyses. Applying the SIMPLEC algorithm and staggering grid system to the two-phase discretized governing equations and employing the slip boundary conditions on the walls, the velocity and pressure fields, and the volumetric concentration are calculated. The simulation results are in a fairly good agreement with experimental data in two operating cases in a conduit with a rectangular cross-section and these comparisons imply that these models are practical.

  14. Two-phase flow phenomena assessment in minichannels for compact heat exchangers using image analysis methods

    International Nuclear Information System (INIS)

    Highlights: • Analysis of the two-phase flow structure in minichannel. • Innovative use of stereology methods and hi-speed photography. • Application of stereological parameters to flow monitoring. - Abstract: The paper describes a method of two-phase flow structure evaluation for minichannels. The two-phase flow structure appears in gas–liquid mixture. The research is based on innovative approach, with the use of stereology methods. Evaluation of the flow structure is made by image analysis. The images are obtained with high-speed visualization technique. The applied stereological analysis is based on the linear methods – the random secants method and directed secants method. Development of mini heat exchangers requires knowledge of the two-phase flow phenomena. The major result of conducted research is that for each flow structure there is a set of stereological parameters, enabling the quantitative estimation of the two-phase flow. It has been found that the interrelation of stereological parameters, during the change of the flow structure, can be used for controlling the operating conditions. The basic conclusion is that the knowledge about the character of the changes taking place in the flow structure may be used for constant process adjustment for various two-phase gas–liquid or gas–solid systems

  15. Unsteady flow analysis of a two-phase hydraulic coupling

    Science.gov (United States)

    Hur, N.; Kwak, M.; Lee, W. J.; Moshfeghi, M.; Chang, C.-S.; Kang, N.-W.

    2016-06-01

    Hydraulic couplings are being widely used for torque transmitting between separate shafts. A mechanism for controlling the transmitted torque of a hydraulic system is to change the amount of working fluid inside the system. This paper numerically investigates three-dimensional turbulent flow in a real hydraulic coupling with different ratios of charged working fluid. Working fluid is assumed to be water and the Realizable k-ɛ turbulence model together with the VOF method are used to investigate two-phase flow inside the wheels. Unsteady simulations are conducted using the sliding mesh technique. The primary wheel is rotating at a fixed speed of 1780 rpm and the secondary wheel rotates at different speeds for simulating different speed ratios. Results are investigated for different blade angles, speed ratios and also different water volume fractions, and are presented in the form of flow patterns, fluid average velocity and also torques values. According to the results, blade angle severely affects the velocity vector and the transmitted torque. Also in the partially-filled cases, air is accumulated in the center of the wheel forming a toroidal shape wrapped by water and the transmitted torque sensitively depends on the water volume fraction. In addition, in the fully-filled case the transmitted torque decreases as the speed ration increases and the average velocity associated with lower speed ratios are higher.

  16. Biogasification of solid wastes by two-phase anaerobic fermentation

    International Nuclear Information System (INIS)

    Municipal, industrial and agricultural solid wastes, and biomass deposits, cause large-scale pollution of land and water. Gaseous products of waste decomposition pollute the air and contribute to global warming. This paper describes the development of a two-phase fermentation system that alleviates methanogenic inhibition encountered with high-solids feed, accelerates methane fermentation of the solid bed, and captures methane (renewable energy) for captive use to reduce global warming. The innovative system consisted of a solid bed reactor packed with simulated solid waste at a density of 160 kg/m3 and operated with recirculation of the percolated culture (bioleachate) through the bed. A rapid onset of solids hydrolysis, acidification, denitrification and hydrogen gas formation was observed under these operating conditions. However, these fermentative reactions stopped at a total fatty acids concentration of 13,000 mg/l (as acetic) at pH 5, with a reactor head-gas composition of 75 percent carbon dioxide, 20 percent nitrogen, 2 percent hydrogen and 3 percent methane. Fermentation inhibition was alleviated by moving the bioleachate to a separate methane-phase fermenter, and recycling methanogenic effluents at pH 7 to the solid bed. Coupled operation of the two reactors promoted methanogenic conversion of the high-solids feed. (author)

  17. Uncertainty analysis of two-phase flow pressure drop calculations

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Cezar A.M.; Costa, Bruno M.P.; Fonseca Junior, Roberto da; Gonalves, Marcelo de A.L. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The simulation of multiphase flow in pipes is usually performed by petroleum engineers with two main purposes: design of new pipelines and production systems; diagnosis of flow assurance problems in existing systems. The tools used for this calculation are computer codes that use published pressure drop correlations developed for steady-state two-phase flow, such as Hagedorn-Brown, Beggs and Brill and others. Each one of these correlations is best suited for a given situation and the engineer must find out the best option for each particular case, based on his experience. In order to select the best correlation to use and to analyze the results of the calculation, the engineer must determine the reliability of computed values. The uncertainty of the computation is obtained by considering uncertainties of the correlation adopted, of the calculation algorithm and the input data. This paper proposes a method to evaluate the uncertainties of this type of calculation and presents an analysis of these uncertainties. The uncertainty analysis also allows the identification of the parameters that are more significant for the final uncertainty of the simulation. Therefore it makes possible to determine which are the input parameters that must be determined with higher accuracy and the ones that may have lower accuracy, without reducing the reliability of the results. (author)

  18. Two-phase model with vector-meson stabilization

    International Nuclear Information System (INIS)

    We present a topological chiral two-phase model for baryons with isoscalar vector meson stabilizing term in the soliton sector instead of the usual Skyrme stabilizing term and compare with a closely related model where the omega meson has been eliminated in the limit of infinite mass and coupling constant. In both cases the static properties come out well and the energy is insensitive to changes in the bag radius, as in other nonperturbative two-phase models. (orig.)

  19. Stochastic modelling of two-phase flows including phase change

    International Nuclear Information System (INIS)

    Stochastic modelling has already been developed and applied for single-phase flows and incompressible two-phase flows. In this article, we propose an extension of this modelling approach to two-phase flows including phase change (e.g. for steam-water flows). Two aspects are emphasised: a stochastic model accounting for phase transition and a modelling constraint which arises from volume conservation. To illustrate the whole approach, some remarks are eventually proposed for two-fluid models. (authors)

  20. Adiabatic boiling of two-phase coolant in upward flow

    International Nuclear Information System (INIS)

    A mathematical model of the process of adiabatic boiling (self-condensation) of a two-phase coolant in upward (downward) flow is developed. The model takes account of changes in phase properties with static pressure decrease. The process is investigated numerically. Approximate analytical formulas for design calculations are obtained. It is shown that effects of adiabatic boiling (self-condensation) should be taken into account when calculating two-phase coolant flow in stretched vertical channels

  1. Two-phase air-water stratified flow measurement using ultrasonic techniques

    Science.gov (United States)

    Fan, Shiwei; Yan, Tinghu; Yeung, Hoi

    2014-04-01

    In this paper, a time resolved ultrasound system was developed for investigating two-phase air-water stratified flow. The hardware of the system includes a pulsed wave transducer, a pulser/receiver, and a digital oscilloscope. The time domain cross correlation method is used to calculate the velocity profile along ultrasonic beam. The system is able to provide velocities with spatial resolution of around 1mm and the temporal resolution of 200μs. Experiments were carried out on single phase water flow and two-phase air-water stratified flow. For single phase water flow, the flow rates from ultrasound system were compared with those from electromagnetic flow (EM) meter, which showed good agreement. Then, the experiments were conducted on two-phase air-water stratified flow and the results were given. Compared with liquid height measurement from conductance probe, it indicated that the measured velocities were explainable.

  2. Rank 0 invariant solutions of dynamics of two-phase medium

    Science.gov (United States)

    Panov, Alexandr

    2016-08-01

    A system of partial differential equations which describes dynamics of two-phase medium is considered. Lie algebra of symmetry group of this system was found. For some 4-dimensional subalgebras of invariant solutions is found. All other 4-dimensional subalgebras will give only partial invariant solutions of this system.

  3. Dynamic behavior of pipes conveying gas–liquid two-phase flow

    International Nuclear Information System (INIS)

    Highlights: • Dynamic behavior of pipes conveying gas–liquid two-phase flow was analyzed. • The generalized integral transform technique (GITT) was applied. • Excellent convergence behavior and long-time stability were shown. • Effects of volumetric quality and volumetric flow rate on dynamic behavior were studied. • Normalized volumetric-flow-rate stability envelope of dynamic system was determined. - Abstract: In this paper, the dynamic behavior of pipes conveying gas–liquid two-phase flow was analytically and numerically investigated on the basis of the generalized integral transform technique (GITT). The use of the GITT approach in the analysis of the transverse vibration equation lead to a coupled system of second order differential equations in the dimensionless temporal variable. The Mathematica's built-in function, NDSolve, was employed to numerically solve the resulting transformed ODE system. The characteristics of gas–liquid two-phase flow were represented by a slip-ratio factor model that was devised and used for similar problems. Good convergence behavior of the proposed eigenfunction expansions is demonstrated for calculating the transverse displacement at various points of pipes conveying air–water two-phase flow. Parametric studies were performed to analyze the effects of the volumetric gas fraction and the volumetric flow rate on the dynamic behavior of pipes conveying air–water two-phase flow. Besides, the normalized volumetric-flow-rate stability envelope for the dynamic system was obtained

  4. Zero-G two phase flow regime modeling in adiabatic flow

    Science.gov (United States)

    Reinarts, Thomas R.; Best, Frederick R.; Wheeler, Montgomery; Miller, Katheryn M.

    1993-01-01

    Two-phase flow, thermal management systems are currently being considered as an alternative to conventional, single phase systems for future space missions because of their potential to reduce overall system mass, size, and pumping power requirements. Knowledge of flow regime transitions, heat transfer characteristics, and pressure drop correlations is necessary to design and develop two-phase systems. This work is concerned with microgravity, two-phase flow regime analysis. The data come from a recent sets of experiments. The experiments were funded by NASA Johnson Space Center (JSC) and conducted by NASA JSC with Texas A&M University. The experiment was on loan to NASA JSC from Foster-Miller, Inc., who constructed it with funding from the Air Force Phillips Laboratory. The experiment used R12 as the working fluid. A Foster-Miller two phase pump was used to circulate the two phase mixture and allow separate measurements of the vapor and liquid flow streams. The experimental package was flown 19 times for 577 parabolas aboard the NASA KC-135 aircraft which simulates zero-G conditions by its parabolic flight trajectory. Test conditions included bubbly, slug and annular flow regimes in 0-G. The superficial velocities of liquid and vapor have been obtained from the measured flow rates and are presented along with the observed flow regimes and several flow regime transition predictions. None of the predictions completely describe the transitions as indicated by the data.

  5. Zero-G two phase flow regime modeling in adiabatic flow

    International Nuclear Information System (INIS)

    Two-phase flow, thermal management systems are currently being considered as an alternative to conventional, single phase systems for future space missions because of their potential to reduce overall system mass, size, and pumping power requirements. Knowledge of flow regime transitions, heat transfer characteristics, and pressure drop correlations is necessary to design and develop two-phase systems. This work is concerned with microgravity, two-phase flow regime analysis. The data come from a recent sets of experiments. The experiments were funded by NASA Johnson Space Center (JSC) and conducted by NASA JSC with Texas A ampersand M University. The experiment was on loan to NASA JSC from Foster-Miller, Inc., who constructed it with funding from the Air Force Phillips Laboratory. The experiment used R12 as the working fluid. A Foster-Miller two phase pump was used to circulate the two phase mixture and allow separate measurements of the vapor and liquid flow streams. The experimental package was flown 19 times for 577 parabolas aboard the NASA KC-135 aircraft which simulates zero-G conditions by its parabolic flight trajectory. Test conditions included bubbly, slug and annular flow regimes in 0-G. The superficial velocities of liquid and vapor have been obtained from the measured flow rates and are presented along with the observed flow regimes and several flow regime transition predictions. None of the predictions completely describe the transitions as indicated by the data

  6. Dynamic behavior of pipes conveying gas–liquid two-phase flow

    Energy Technology Data Exchange (ETDEWEB)

    An, Chen, E-mail: anchen@cup.edu.cn [Offshore Oil/Gas Research Center, China University of Petroleum-Beijing, Beijing 102249 (China); Su, Jian, E-mail: sujian@lasme.coppe.ufrj.br [Nuclear Engineering Program, COPPE, Universidade Federal do Rio de Janeiro, CP 68509, Rio de Janeiro 21941-972 (Brazil)

    2015-10-15

    Highlights: • Dynamic behavior of pipes conveying gas–liquid two-phase flow was analyzed. • The generalized integral transform technique (GITT) was applied. • Excellent convergence behavior and long-time stability were shown. • Effects of volumetric quality and volumetric flow rate on dynamic behavior were studied. • Normalized volumetric-flow-rate stability envelope of dynamic system was determined. - Abstract: In this paper, the dynamic behavior of pipes conveying gas–liquid two-phase flow was analytically and numerically investigated on the basis of the generalized integral transform technique (GITT). The use of the GITT approach in the analysis of the transverse vibration equation lead to a coupled system of second order differential equations in the dimensionless temporal variable. The Mathematica's built-in function, NDSolve, was employed to numerically solve the resulting transformed ODE system. The characteristics of gas–liquid two-phase flow were represented by a slip-ratio factor model that was devised and used for similar problems. Good convergence behavior of the proposed eigenfunction expansions is demonstrated for calculating the transverse displacement at various points of pipes conveying air–water two-phase flow. Parametric studies were performed to analyze the effects of the volumetric gas fraction and the volumetric flow rate on the dynamic behavior of pipes conveying air–water two-phase flow. Besides, the normalized volumetric-flow-rate stability envelope for the dynamic system was obtained.

  7. Simultaneous biodegradation of volatile and toxic contaminant mixtures by solid–liquid two-phase partitioning bioreactors

    Energy Technology Data Exchange (ETDEWEB)

    Poleo, Eduardo E.; Daugulis, Andrew J., E-mail: andrew.daugulis@chee.queensu.ca

    2013-06-15

    Highlights: • We investigate the simultaneous biodegradation of phenol and butyl acetate. • We identify an effective polymer mixture to selectively absorb each of the substrates and decrease their initial concentration. •The polymer mixture is used to overcome the high phenol cytotoxicity and reduce the abiotic losses of butyl acetate associated with volatility. • The solid–liquid Two Phase Partitioning Bioreactor (TPPB) outperforms the liquid–liquid TPPB and the single phase systems. -- Abstract: Microbial inhibition and stripping of volatile compounds are two common problems encountered in the biotreatment of contaminated wastewaters. Both can be addressed by the addition of a hydrophobic auxiliary phase that can absorb and subsequently re-release the substrates, lowering their initial aqueous concentrations. Such systems have been described as Two Phase Partitioning Bioreactors (TPPBs). In the current work the performances of a solid–liquid TPPB, a liquid–liquid TPPB and a single phase reactor for the simultaneous degradation of butyl acetate (the volatile component) and phenol (the toxic component) have been compared. The auxiliary phase used in the solid–liquid TPPB was a 50:50 polymer mixture of styrene–butadiene rubber and Hytrel{sup ®} 8206, with high affinities for butyl acetate and phenol, respectively. The liquid–liquid TPPB employed silicone oil which has fixed physical properties, and had no capacity to absorb the toxic contaminant (phenol). Butyl acetate degradation was enhanced in both TPPBs relative to the single phase, arising from its sequestration into the auxiliary phase, thereby reducing volatilization losses. The solid–liquid TPPB additionally showed a substantial increase in the phenol degradation rate, relative to the silicone oil system, demonstrating the superiority and versatility of polymer based systems.

  8. Simultaneous biodegradation of volatile and toxic contaminant mixtures by solid–liquid two-phase partitioning bioreactors

    International Nuclear Information System (INIS)

    Highlights: • We investigate the simultaneous biodegradation of phenol and butyl acetate. • We identify an effective polymer mixture to selectively absorb each of the substrates and decrease their initial concentration. •The polymer mixture is used to overcome the high phenol cytotoxicity and reduce the abiotic losses of butyl acetate associated with volatility. • The solid–liquid Two Phase Partitioning Bioreactor (TPPB) outperforms the liquid–liquid TPPB and the single phase systems. -- Abstract: Microbial inhibition and stripping of volatile compounds are two common problems encountered in the biotreatment of contaminated wastewaters. Both can be addressed by the addition of a hydrophobic auxiliary phase that can absorb and subsequently re-release the substrates, lowering their initial aqueous concentrations. Such systems have been described as Two Phase Partitioning Bioreactors (TPPBs). In the current work the performances of a solid–liquid TPPB, a liquid–liquid TPPB and a single phase reactor for the simultaneous degradation of butyl acetate (the volatile component) and phenol (the toxic component) have been compared. The auxiliary phase used in the solid–liquid TPPB was a 50:50 polymer mixture of styrene–butadiene rubber and Hytrel® 8206, with high affinities for butyl acetate and phenol, respectively. The liquid–liquid TPPB employed silicone oil which has fixed physical properties, and had no capacity to absorb the toxic contaminant (phenol). Butyl acetate degradation was enhanced in both TPPBs relative to the single phase, arising from its sequestration into the auxiliary phase, thereby reducing volatilization losses. The solid–liquid TPPB additionally showed a substantial increase in the phenol degradation rate, relative to the silicone oil system, demonstrating the superiority and versatility of polymer based systems

  9. The pressure effects on two-phase anaerobic digestion

    International Nuclear Information System (INIS)

    Highlights: • The pressure effect on anaerobic digestion up to 9 bar was examined. • Increasing pressure decreased pH value in the anaerobic filter. • Increasing pressure increased methane content. • Increasing pressure decreased specific methane yield slightly. • The pressurized methane reactor was very stable and performed well. - Abstract: Two-phase pressurized anaerobic digestion is a novel process aimed at facilitating injection of the produced biogas into the natural gas grid by integrating the fermentative biogas production and upgrading it to substitute natural gas. In order to understand the mechanisms, knowledge of pressure effects on anaerobic digestion is required. To examine the effects of pressure on the anaerobic digestion process, a two-phase anaerobic digestion system was built up in laboratory scale, including three acidogenesis-leach-bed-reactors and one pressure-resistant anaerobic filter. Four different pressure levels (the absolute pressure of 1 bar, 3 bar, 6 bar and 9 bar) were applied to the methane reactor in sequence, with the organic loading rate maintained at approximately 5.1 kgCOD m−3 d−1. Gas production, gas quality, pH value, volatile fatty acids, alcohol, ammonium-nitrogen, chemical oxygen demand (COD) and alkaline buffer capacity were analyzed. No additional caustic chemicals were added for pH adjustment throughout the experiment. With the pressure increasing from 1.07 bar to 8.91 bar, the pH value decreased from 7.2 to 6.5, the methane content increased from 66% to 75%, and the specific methane yield was slightly reduced from 0.33 lN g−1COD to 0.31 lN g−1COD. There was almost no acid-accumulation during the entire experiment. The average COD-degradation grade was always more than 93%, and the average alkaline buffering capacity (VFA/TIC ratio) did not exceed 0.2 at any pressure level. The anaerobic filter showed a very stable performance, regardless of the pressure variation

  10. Enhancement of glass-forming ability and mechanical behavior of zirconium–lanthanide two-phase bulk metallic glasses

    International Nuclear Information System (INIS)

    Highlights: • This work provides a new concept for design of two-phase BMGs. • The formation of two-glass structure in two-liquid systems is analyzed. • A strategy for improving GFA of two-phase metallic glasses is proposed. • A family of two-phase metallic glasses in bulk form is developed. • The mechanical behavior of two-phase BMGs is studied for the first time. - Abstract: Development of the two-phase bulk metallic glasses (BMGs) is essentially retarded due to difficulties in finding of phase-separated (immiscible) alloys with high glass-forming ability (GFA) of coexistent phases. Referring to the concept of solute partitioning and minimization of free energy, in this work we present an idea that a metallic liquid system containing two liquids with individual self-assembled eutectic composition may yield two-phase BMGs upon casting. The formation of the two-glass structure is discussed and a strategy of partial substitution of chemically similar elements for overcoming the drawback of low GFA is proposed. A family of two-phase zirconium–lanthanide based metallic glasses in bulk form is developed. The mechanical behavior of the two-phase BMGs with different ratio of zirconium-rich to lanthanide-rich glassy phase is studied for the first time. This work provides a new concept for fabrication of two-phase BMGs and reveals the role of constituent phases in determining the mechanical properties of the whole glass

  11. Mechanisms for two phase flow in porous media

    International Nuclear Information System (INIS)

    For a better understanding of transport mechanisms in soil for a system with two phases of immiscible liquids the physics of porous media gives again important contributions. In this report, the considerations mainly concentrate on horizontal transport. Our approach is based on the similarity solution of the transport equation which reduces a given nonlinear partial differential equation (PDE) to an ordinary differential equation (ODE). It can be seen, how dimensionless similarity solutions of the ODE depend, in addition to the similarity variable, on two parameters: - the capillary number Nc, giving the ratio of capillary forces and viscous forces, and - the ratio of the viscosities of the two liquid phases. It is shown, under which conditions different mechanisms of transport are to be expected, such as - a completely stable displacement or - an unstable displacement, related to viscous fingering (DLA, Diffusion Limited Aggregation) or to capillary fingering (IP, Invasion Percolation). These mechanisms are also strongly dependent on certain critical exponents (characteristic for DLA or IP). These relations are discussed in our report. Again, for some regions of saturation, mechanisms of displacement are either clearly dominated - by imbibition (e.g. water pushing oil) or - by drain (e.g. oil pushing water). Some of the results are also transformed again from the similarity solution of the ODE to a solution of the PDE (with space- and time coordinates). It is seen, that even with this somewhat simplified approach, we obtain a considerable spectrum of mechanisms. (orig.)

  12. Stability of stratified two-phase flows in horizontal channels

    Science.gov (United States)

    Barmak, I.; Gelfgat, A.; Vitoshkin, H.; Ullmann, A.; Brauner, N.

    2016-04-01

    Linear stability of stratified two-phase flows in horizontal channels to arbitrary wavenumber disturbances is studied. The problem is reduced to Orr-Sommerfeld equations for the stream function disturbances, defined in each sublayer and coupled via boundary conditions that account also for possible interface deformation and capillary forces. Applying the Chebyshev collocation method, the equations and interface boundary conditions are reduced to the generalized eigenvalue problems solved by standard means of numerical linear algebra for the entire spectrum of eigenvalues and the associated eigenvectors. Some additional conclusions concerning the instability nature are derived from the most unstable perturbation patterns. The results are summarized in the form of stability maps showing the operational conditions at which a stratified-smooth flow pattern is stable. It is found that for gas-liquid and liquid-liquid systems, the stratified flow with a smooth interface is stable only in confined zone of relatively low flow rates, which is in agreement with experiments, but is not predicted by long-wave analysis. Depending on the flow conditions, the critical perturbations can originate mainly at the interface (so-called "interfacial modes of instability") or in the bulk of one of the phases (i.e., "shear modes"). The present analysis revealed that there is no definite correlation between the type of instability and the perturbation wavelength.

  13. 批量到达的、具有两种服务阶段和服务中断的重试排队系统的适定性%Well-Posedness of the Batch Arrival Retrial Queueing System with Two Phases of Service and Service Interruption

    Institute of Scientific and Technical Information of China (English)

    艾合买提·卡斯木; 艾尼·吾甫尔

    2012-01-01

    By using the Hille-Yosida theorem, the Phillips theorem and Fattorini theorem we prove that the batch arrival retrial queueing system with two phases of service and service interruption has a unique positive time-dependent solution which satisfies probability condition.%运用Hille-Yosida定理,Phillips定理与Fattorini定理证明批量到达、具有两种服务阶段和服务中断的重试排队系统存在唯一的、非负的、满足概率性质的时间依赖解.

  14. Visualization and quantification of two-phase flow in transparent miniature packed beds

    Science.gov (United States)

    Zhu, Peixi; Papadopoulos, Kyriakos D.

    2012-10-01

    Optical microscopy was used to visualize the flow of two phases [British Petroleum (BP) oil and an aqueous surfactant phase] in confined space, three-dimensional, transparent, natural porous media. The porous media consisted of water-wet cryolite grains packed inside cylindrical, glass microchannels, thus producing microscopic packed beds. Primary drainage of BP oil displacing an aqueous surfactant phase was studied at capillary numbers that varied between 10-6 and 10-2. The confinement space had a significant effect on the flow behavior. Phenomena of burst motion and capillary fingering were observed for low capillary numbers due to the domination of capillary forces. It was discovered that breakthrough time and capillary number bear a log-log scale linear relationship, based on which a generalized correlation between oil travel distance x and time t was found empirically.

  15. Geomorphic and Aqueous Chemistry of a Portion of the Upper Rio Tinto System, Spain

    Science.gov (United States)

    Osburn, M. R.; Fernandez-Remolar, D. C.; Arvidson, R. E.; Morris, R. V.; Ming, D.; Prieto-Ballesteros, O.; Amils, R.; Stein, T. C.; Heil-Chapdelaine, V.; Friedlander, L. R.; Herndon, B.; Marlow, J.; Rosenberg, S.; Scherpker, K.; Steiner, A.

    2007-01-01

    Observations from the two Mars rovers, Spirit and Opportunity, combined with discoveries of extensive hydrated sulfate deposits from OMEGA and CRISM show that aqueous deposition and alteration involving acidic systems and sulfate deposition has been a key contributor to the martian geologic record. Rio Tinto, Spain, provides a process model for formation of sulfates on Mars by evaporation of acidic waters within shallow fluvial pools, particularly during dry seasons. We present results from a detailed investigation of an upper portion of the Rio Tinto, focusing on geomorphology, clastic sediment transport, and acidic aqueous processes. We also lay out lessons-learned for under-standing sulfate formation and alteration on Mars.

  16. Research on one-dimensional two-phase flow

    International Nuclear Information System (INIS)

    In the Part I, the author describes about the fundamental form of the hydraulic basic equations for a one-dimensional two-phase flow (two fluid model). Most of the discussions are concentrated on the treatment of phase change inertial force terms in the equations of motion and the author's equations of motion have a strong uniqueness on the following three points in comparison with conventional equations of motion. (1) To express force balance of unit mass two-phase fluid instead of that of unit volume two-phase fluid. (2) To pick up the unit existing mass and the unit flowing mass as the unit mass of two-phase fluid. (3) To apply the kinetic energy principle instead of the momentum low in the evaluation of stational inertia force term. In these three, the item (1) is for excluding a part of momentum change or kinetic energy change due to mass change of the elementary part of fluid, which is independent of force. The item (2) is not to introduce a phenomenological physical model into the evaluation of phase change inertial force term. And the item (3) is for correctly applying the momentum law taking into account the difference of representative velocities between the main flow fluid (vapor phase or liquid phase) and the phase change part of fluid. In the Part II, characteristics of various kinds of high speed two-phase flow are clarified theoretically by using the basic equations derived in the Part I. It is demonstrated that the steam-water two-phase critical flow with violent flashing and the air-water two-phase critical flow without phase change can be described with fundamentally the same basic equations. Furthermore, by comparing the experimental data from the two-phase critical discharge test and the author's theoretical prediction, the two-phase discharge coefficient, CD, for large sharp-edged orifice is determined as the value which is not affected by the experimental facility characteristics, etc.. (J.P.N.)

  17. Performance of a passive emergency heat removal system of advanced reactors in two-phase flow and with high concentration of non-condensable; Atuacao de um sistema passivo de remocao de calor de emergencia de reatores avancados em escoamento bifasico e com alta concentracao de nao-condensaveis

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, Luiz Alberto

    2008-07-01

    The research and the development of passive emergency cooling systems are necessary for the new generation of thermo-nuclear systems. Some basic information on the operation of these systems require the research of some relative processes to the natural circulation, mainly in conditions of two-phase flow involving processes of condensation in the presence of non-condensable gases, because many found situations are new. The experimental facility called Bancada de Circulacao Natural (BCN) was used for the realization of tests with diverse concentrations of non-condensable and power levels. The non-condensable gas present in the circuit decreases the rate of heat transfer for the secondary of the heat exchanger, determining low efficiency of the heat exchanger. High concentration of non-condensable in the vapor condensation, determines negative pressure, and cause the inversion of the flow in the circuit. The initial concentration of non-condensable and the geometry of the circuit, in the inlet of the heat exchanger, determines the establishment of transitory with two-phase flow. The BCN was performed with the computational code of Analysis of Accidents and Thermal-Hydraulics RELAP5/MOD 3.3 and, the calculated values had been compared with the experimental data, presenting good agreement for small non-condensable concentrations. The values calculated for high concentrations of non-condensable had been satisfactory after the circuit to have reached the temperature of saturation in the electric heater. (author)

  18. Characterizing dynamic hysteresis and fractal statistics of chaotic two-phase flow and application to fuel cells

    Science.gov (United States)

    Burkholder, Michael B.; Litster, Shawn

    2016-05-01

    In this study, we analyze the stability of two-phase flow regimes and their transitions using chaotic and fractal statistics, and we report new measurements of dynamic two-phase pressure drop hysteresis that is related to flow regime stability and channel water content. Two-phase flow dynamics are relevant to a variety of real-world systems, and quantifying transient two-phase flow phenomena is important for efficient design. We recorded two-phase (air and water) pressure drops and flow images in a microchannel under both steady and transient conditions. Using Lyapunov exponents and Hurst exponents to characterize the steady-state pressure fluctuations, we develop a new, measurable regime identification criteria based on the dynamic stability of the two-phase pressure signal. We also applied a new experimental technique by continuously cycling the air flow rate to study dynamic hysteresis in two-phase pressure drops, which is separate from steady-state hysteresis and can be used to understand two-phase flow development time scales. Using recorded images of the two-phase flow, we show that the capacitive dynamic hysteresis is related to channel water content and flow regime stability. The mixed-wettability microchannel and in-channel water introduction used in this study simulate a polymer electrolyte fuel cell cathode air flow channel.

  19. Investigation on two-phase flow instability in steam generator of integrated nuclear reactor

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    In the pressure range of 3-18MPa,high pressure steam-water two-phase flow density wave instability in vertical upward parallel pipes with inner diameter of 12mm is studied experimentally.The oscillation curves of two-phase flow instability and the effects of several parameters on the oscillation threshold of the system are obtained.Based on the small pertubation linearization method and the stability principles of automatic control system,a mathematical model is developed to predict the characteristics of density wave instability threshold.The predictions of the model are in good agreement with the experimental results.

  20. DRIFT: a network analysis computer program based on drift-flux model for two-phase flow

    International Nuclear Information System (INIS)

    A general description on various two-phase flow models used in the analysis of water reacter safety is given. An introduction to TRIFT, a one dimentional two-phase flow system analysis code based on nonequilibrium driftflux model, is presented. It also includes the calculation for a simple example and a summary on the characteristics of the code