WorldWideScience

Sample records for aqueous potassium chloride

  1. Mass transport in aqueous zinc chloride-potassium chloride electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Leaist, D.G.

    1986-09-01

    Conductimetric and diaphragm cell techniques have been used to measure ternary diffusion coefficients for aqueous zinc chloride-potassium chloride solutions at 25/sup 0/C. At low concentrations where Zn/sup 2 +/ is the major zinc-transporting species, the diffusion-induced electric field along zinc chloride concentration gradients drives large co-current flows of potassium chloride. In concentrated solutions where a large proportion of zinc diffusses as anionic ZnCl/sub 3//sup -/ and ZnCl/sub 4//sup 2 -/ complexes, flow of zinc chloride generates counterflow of potassium chloride. If a sharp zinc chloride is formed in an otherwise uniform solution of potassium chloride, coupled diffusion can concentrate potassium ions within the diffusion boundary. Equations are developed to predict multicomponent transport coefficients for zinc chloride in supporting electrolytes.

  2. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    International Nuclear Information System (INIS)

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (hxy, hxxy, and hxyy) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients hxy between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  3. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Liu Min, E-mail: panpanliumin@163.co [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Wang Lili [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Zhu Lanying [College of Life Science and Bioengineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Li Hui; Sun Dezhi; Di Youying; Li Linwei [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China)

    2010-07-15

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (h{sub xy}, h{sub xxy}, and h{sub xyy}) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients h{sub xy} between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  4. Viscosity of aqueous-glyceric solutions of potassium, rubidium and cesium chlorides

    International Nuclear Information System (INIS)

    Results of viscometric investigation of the solutions of rubidium and cesium chlorides (also potassium chloride for comparison) in mixtures water-glycerine at 15, 25, 35 and 45 deg C are presented. Glycerine content constituted 0.01; 0.03; 0.05; 0.07; 0.11 molar fractions. It is shown that the range of viscosity values lower as compared to the ones for pure solvent are the wider the lower the temperature and glycerine content are (in the range of 0.01-0.11 molar fractions). The composition-viscosity, temperature-viscosity diagrams are presented

  5. Rheological behaviour of some saccharides in aqueous potassium chloride solutions over temperature range (288.15 to 318.15) K

    Energy Technology Data Exchange (ETDEWEB)

    Banipal, Parampaul K., E-mail: pkbanipal@yahoo.co [Department of Chemistry, Guru Nanak Dev University, Amritsar 143005 (India); Chahal, Amanpreet K.; Singh, Vickramjeet [Department of Chemistry, Guru Nanak Dev University, Amritsar 143005 (India); Banipal, Tarlok S. [Department of Applied Chemistry, Guru Nanak Dev University, Amritsar 143005 (India)

    2010-08-15

    The viscosities, {eta} of mono-, di-, tri-saccharides and methylglycosides, viz., D(+)-xylose (XYL), D(-)-arabinose (ARA), D(-)-ribose (RIB), D(-)-fructose (FRU), D(+)-galactose (GAL), D(+)-mannose (MAN), D(+)-glucose (GLU), D(+)-melibiose (MEL), D(+)-cellobiose (CEL), D(+)-lactose monohydrate (LAC), D(+)-maltose monohydrate (MAL), D(+)-trehalose dihydrate (TRE), sucrose (SUC), D(+)-raffinose pentahydrate (RAF), {alpha}-methyl-D(+)-glucoside ({alpha}-Me-GLU), methyl-{alpha}-D-xylopyranoside (Me-{alpha}-XYL), and methyl-{beta}-D-xylopyranoside (Me-{beta}-XYL) in water and in (0.5, 1.0, 2.0, and 3.0) mol . kg{sup -1} aqueous solutions of potassium chloride (KCl) have been determined at T = (288.15, 298.15, 308.15, and 318.15) K from efflux time measurements by using a capillary viscometer. Densities used to determine viscosities have been reported earlier. The viscosity data have been utilized to determine the viscosity B-coefficients employing the Jones-Dole equation at different temperatures. From these data, the viscosity B-coefficients of transfer, {Delta}{sub t}B have been estimated for the transfer of various saccharides/methylglycosides from water to aqueous potassium chloride solutions. The {Delta}{sub t}B values have been found to be positive, whose magnitude increases with the increase in concentration of potassium chloride in all cases. The dB/dT coefficients, pair, {eta}{sub AB} and triplet, {eta}{sub ABB} viscometric interaction coefficients have also been determined. Gibbs free energies of activation and related thermodynamic parameters of activation of viscous flow have been determined employing Feakin's transition-state theory. The signs and magnitudes of various parameters have been discussed in terms of solute-solute and solute-solvent interactions occurring in these solutions. The effect of substitution of -OH by methoxy group, -OCH{sub 3} has also been discussed.

  6. Potassium chloride production by microcline chlorination

    International Nuclear Information System (INIS)

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl2–N2 mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated

  7. Potassium chloride production by microcline chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, San Luis (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina)

    2015-08-10

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl{sub 2}–N{sub 2} mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated.

  8. Sodium chloride, potassium chloride, and virulence in Listeria monocytogenes.

    OpenAIRE

    MYERS, E. R.; Dallmier, A W; Martin, S E

    1993-01-01

    Virulence, as determined in a mouse model, and the virulence factor activities of catalase, superoxide dismutase, and listeriolysin O were examined in a parental strain (10403S) and in a nonhemolytic mutant strain (DP-L224) of Listeria monocytogenes. The cells were propagated in media containing various concentrations of sodium chloride or potassium chloride. Strains 10403S and DP-L224 exhibited significant increases in catalase activity and listeriolysin O activity when grown in medium conta...

  9. Potassium sorbate-A new aqueous copper corrosion inhibitor

    Energy Technology Data Exchange (ETDEWEB)

    Abelev, Esta [Department of Materials Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Starosvetsky, David [Department of Materials Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Ein-Eli, Yair [Department of Materials Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel)]. E-mail: eineli@tx.technion.ac.il

    2007-01-01

    This work presents the novel nature of 2,4-hexadienoic acid potassium salt (potassium sorbate (KCH{sub 3}CH=CHCH=CHCO{sub 2})) as an effective copper aqueous corrosion inhibitor. The influence of pH and potassium sorbate concentration on copper corrosion in aerated sulfate and chloride solutions is reported. Degree of copper protection was found to increase with an increase in potassium sorbate concentration; an optimum concentration of this inhibitor in sulfate solutions was found to be 10 g/L. Copper is highly resistant to corrosion attacks by chloride ions in the presence of potassium sorbate. X-ray photoelectron spectroscopy (XPS) studies suggest that copper protection is achieved via the formation of a mixed layer of cuprous oxide, cupric hydroxide and copper(II)-sorbate at the metal surface.

  10. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  11. The inhibitory effects of potassium chloride versus potassium silicate application on (137)Cs uptake by rice.

    Science.gov (United States)

    Fujimura, Shigeto; Yoshioka, Kunio; Ota, Takeshi; Ishikawa, Tetsuya; Sato, Makoto; Satou, Mutsuto

    2016-03-01

    After the accident at the Fukushima Dai-ichi Nuclear Power Plant owned by the Tokyo Electric Power Company on 11 March 2011, potassium fertilizer was applied to agricultural fields in the southern Tohoku and northern Kanto regions of Japan to reduce the uptake of radiocesium by crops. In this study, we examined the effects of two types of potassium fertilizers, potassium chloride (a readily available potassium fertilizer) and potassium silicate (a slow-release potassium fertilizer), as well as a split application of potassium, on the accumulation of (137)Cs by rice plants in two pot experiments. The (137)Cs concentrations in the brown rice and in the above-ground plants were significantly lower after potassium chloride application than after potassium silicate application. The potassium ion (K(+)) concentrations in soil solutions sampled 9 and 21 d after transplanting were significantly higher for the potassium chloride application than for the potassium silicate application. The K(+) concentrations in soil solutions observed in the application of potassium silicate were similar to those in the treatment when no potassium was applied. This finding indicates that the application of potassium silicate did not sufficiently increase the available K(+) for rice plants in the soil, which led to a greater uptake of (137)Cs after the potassium silicate application than after the application of potassium chloride. The (137)Cs concentration in brown rice was higher in the split application of potassium fertilizer with the second application at the full heading stage than that without split application and the split application with the second application before heading. PMID:26773513

  12. Effect of potassium chloride on diffusion of theophylline at T = 298.15 K

    International Nuclear Information System (INIS)

    Research highlights: → Mutual diffusion coefficients of theophylline in aqueous dilute solutions. → Influence of the presence of potassium chloride in the aqueous media. → Estimation of the association constant, K, between THP and KCl. - Abstract: Ternary mutual diffusion coefficients measured by Taylor dispersion method (D11, D22, D12, and D21) are reported for aqueous solutions of KCl + theophylline (THP) at T = 298.15 K at carrier concentrations from (0.000 to 0.010) mol · dm-3, for each solute. These diffusion coefficients have been measured having in mind a better understanding of the structure of these systems and the thermodynamic behavior of potassium chloride and theophylline in solution. For example, from these data it will be possible to make conclusions about the influence of this electrolyte in diffusion of THP and to estimate some parameters, such as the diffusion coefficient of the aggregate between KCl and THP.

  13. Chemical characterization of a potassium hydroxyapatite prepared by soaking in potassium chloride and carbonate solutions.

    Science.gov (United States)

    Nordström, E G; Karlsson, K H

    1992-01-01

    A potassium-doped synthetic apatite was prepared by soaking hydroxyapatite in potassium carbonate and potassium chloride solutions. The hydroxyapatite was prepared by firing slip cast ceramic bodies in vacuum at 1100 degrees C. The conical ceramic samples and a crushed material of this were soaked in carbonate and chloride solutions for 2, 4, 6, and 8 weeks. Potassium, calcium, and phosphate were determined by direct current plasma emission spectroscopy. The carbonate content was determined by thermogravimetric analysis and chloride titrimetrically. After 2 weeks, one potassium ion substituted one calcium ion when soaked in a carbonate solution. When soaked in the chloride solution substitution occurred to the same extent. At phosphate sites the substitution of phosphate for carbonate occurred at one sixth of the sites after 2 weeks. Chloride incorporated one half of the OH-sites after 2 weeks. After 4 weeks about one chloride ion was found in the apatite, and after 6 weeks one and a half of the OH-sites were occupied by chloride ions. PMID:1483120

  14. Effect of potassium chloride on diffusion of theophylline at T = 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Cecilia I.A.V., E-mail: cecilia.alves@uah.e [Departamento de Quimica Fisica, Facultad de Farmacia, Universidad de Alcala, 28871 Alcala de Henares, Madrid (Spain); Lobo, Victor M.M., E-mail: vlobo@ci.uc.p [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal); Esteso, Miguel A., E-mail: miguel.esteso@uah.e [Departamento de Quimica Fisica, Facultad de Farmacia, Universidad de Alcala, 28871 Alcala de Henares, Madrid (Spain); Ribeiro, Ana C.F., E-mail: anacfrib@ci.uc.p [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal)

    2011-06-15

    Research highlights: {yields} Mutual diffusion coefficients of theophylline in aqueous dilute solutions. {yields} Influence of the presence of potassium chloride in the aqueous media. {yields} Estimation of the association constant, K, between THP and KCl. - Abstract: Ternary mutual diffusion coefficients measured by Taylor dispersion method (D{sub 11}, D{sub 22}, D{sub 12}, and D{sub 21}) are reported for aqueous solutions of KCl + theophylline (THP) at T = 298.15 K at carrier concentrations from (0.000 to 0.010) mol {center_dot} dm{sup -3}, for each solute. These diffusion coefficients have been measured having in mind a better understanding of the structure of these systems and the thermodynamic behavior of potassium chloride and theophylline in solution. For example, from these data it will be possible to make conclusions about the influence of this electrolyte in diffusion of THP and to estimate some parameters, such as the diffusion coefficient of the aggregate between KCl and THP.

  15. Dietary Impact of Adding Potassium Chloride to Foods as a Sodium Reduction Technique.

    Science.gov (United States)

    van Buren, Leo; Dötsch-Klerk, Mariska; Seewi, Gila; Newson, Rachel S

    2016-01-01

    Potassium chloride is a leading reformulation technology for reducing sodium in food products. As, globally, sodium intake exceeds guidelines, this technology is beneficial; however, its potential impact on potassium intake is unknown. Therefore, a modeling study was conducted using Dutch National Food Survey data to examine the dietary impact of reformulation (n = 2106). Product-specific sodium criteria, to enable a maximum daily sodium chloride intake of 5 grams/day, were applied to all foods consumed in the survey. The impact of replacing 20%, 50% and 100% of sodium chloride from each product with potassium chloride was modeled. At baseline median, potassium intake was 3334 mg/day. An increase in the median intake of potassium of 453 mg/day was seen when a 20% replacement was applied, 674 mg/day with a 50% replacement scenario and 733 mg/day with a 100% replacement scenario. Reformulation had the largest impact on: bread, processed fruit and vegetables, snacks and processed meat. Replacement of sodium chloride by potassium chloride, particularly in key contributing product groups, would result in better compliance to potassium intake guidelines (3510 mg/day). Moreover, it could be considered safe for the general adult population, as intake remains compliant with EFSA guidelines. Based on current modeling potassium chloride presents as a valuable, safe replacer for sodium chloride in food products. PMID:27110818

  16. Unique chloride-sensing properties of WNK4 permit the distal nephron to modulate potassium homeostasis.

    Science.gov (United States)

    Terker, Andrew S; Zhang, Chong; Erspamer, Kayla J; Gamba, Gerardo; Yang, Chao-Ling; Ellison, David H

    2016-01-01

    Dietary potassium deficiency activates thiazide-sensitive sodium chloride cotransport along the distal nephron. This may explain, in part, the hypertension and cardiovascular mortality observed in individuals who consume a low-potassium diet. Recent data suggest that plasma potassium affects the distal nephron directly by influencing intracellular chloride, an inhibitor of the with-no-lysine kinase (WNK)-Ste20p-related proline- and alanine-rich kinase (SPAK) pathway. As previous studies used extreme dietary manipulations, we sought to determine whether the relationship between potassium and NaCl cotransporter (NCC) is physiologically relevant and clarify the mechanisms involved. We report that modest changes in both dietary and plasma potassium affect NCC in vivo. Kinase assay studies showed that chloride inhibits WNK4 kinase activity at lower concentrations than it inhibits activity of WNK1 or WNK3. Also, chloride inhibited WNK4 within the range of distal cell chloride concentration. Mutation of a previously identified WNK chloride-binding motif converted WNK4 effects on SPAK from inhibitory to stimulatory in mammalian cells. Disruption of this motif in WNKs 1, 3, and 4 had different effects on NCC, consistent with the three WNKs having different chloride sensitivities. Thus, potassium effects on NCC are graded within the physiological range, which explains how unique chloride-sensing properties of WNK4 enable it to mediate effects of potassium on NCC in vivo. PMID:26422504

  17. Isotope effect of potassium in an aqueous/amalgam system

    International Nuclear Information System (INIS)

    The isotope fractionation of potassium in an aqueous (KOH)/amalgam system has been studied. Two types of isotope effects with opposite isotope enrichment directions were observed in the electrolysis of potassium from the aqueous into the amalgam phase under constant electrolytic potentials. It was found that the first isotope effect causing the light isotope enriched in the amalgam is related to the kinetic process of the mass transfer through the aqueous/amalgam interface, while the second one leading to the enrichment of the heavy isotope in the amalgam phase is produced by the isotope-exchange equilibrium. The temperature dependence of the equilibrium isotope effect was also investigated using single-stage and multi-stage techniques. It was observed that the equilibrium isotope effect increases as the temperature increases in the range of 293-371 K. An empirical equation was used to fit the variations of the isotope effects with temperature for potassium together with the other alkaline and alkaline earth metals studied in the same system. The origin of the equilibrium isotope fractionation in the electron-exchange system was discussed. Furthermore, the mass dependence of the separation coefficients of the alkaline and alkaline earth metals observed in aqueous/amalgam and ion-exchange systems were compared. At 293 K the equilibrium isotope separation coefficient for the 39K/41K isotopes in the amalgam system was determined as (5.6 ± 0.6).10-3. (author)

  18. Chloride is essential for contraction of afferent arterioles after agonists and potassium

    DEFF Research Database (Denmark)

    Jensen, B L; Ellekvist, Peter; Skøtt, O

    1997-01-01

    A depolarizing chloride efflux has been suggested to activate voltage-dependent calcium channels in renal afferent arteriolar smooth muscle cells in response to vasoconstrictors. To test this proposal, rabbit afferent arterioles were microperfused, and the contractile dose responses to...... chloride. We conclude that norepinephrine and ANG II use different mechanisms for contraction and that extracellular chloride is essential for contraction in afferent arterioles after activation of voltage-dependent calcium channels. We suggest that a chloride influx pathway is activated concomitantly with......). Reintroduction of chloride fully restored the sensitivity to norepinephrine. Contractions after ANG II and potassium were totally abolished in the absence of chloride (n = 6). In additional experiments (n = 7), the arteriolar contraction to 100 mM potassium was abolished only 1 min after removal of extracellular...

  19. Electrodeposition of cerium from aqueous cerous chloride solutions

    International Nuclear Information System (INIS)

    Cerium was plated as a grey, metallic, adherent deposit from aqueous cerous chloride baths containing certain organic addition agents. The cathodic current efficiency was determined for each case. Chemical analysis indicates that the purity of the metal is better than 99.0 per cent. (author). 7 refs

  20. Reactivity of potassium permanganate and tetraethylammonium chloride with mismatched bases and a simple mutation detection protocol.

    OpenAIRE

    Lambrinakos, A; Humphrey, K E; Babon, J J; Ellis, T P; Cotton, R G

    1999-01-01

    Many mutation detection techniques rely upon recognition of mismatched base pairs in DNA hetero-duplexes. Potassium permanganate in combination with tetraethylammonium chloride (TEAC) is capable of chemically modifying mismatched thymidine residues. The DNA strand can then be cleaved at that point by treatment with piperidine. The reactivity of potassium permanganate (KMnO4) in TEAC toward mismatches was investigated in 29 different mutations, representing 58 mismatched base pairs and 116 mis...

  1. The biochemical effects of potassium chloride on the silkworm, ( Bombyx mori L.)

    Institute of Scientific and Technical Information of China (English)

    ARUNDHUTIBHATTACHARYA; BASSAPPAB.KALIWAL

    2005-01-01

    The supplementation with 50, 100 and 150μg/mL potassium chloride to the fifth instar larvae of the silkworm Bombyx mori on fat body glycogen, protein, total lipids and haemolymph protein and trehalose were analyzed. The fat body glycogen and protein and haemolymph protein were increased significantly in all the treated groups; whereas fat body total lipids increased only in 100 and 150μg/mL and haemolymph trehalose increased only in 150μg/mL potassium chloride-treated groups when compared with those of the corresponding parameters of the carrier controls.

  2. Polyacrylamide/potassium-chloride mud for drilling water-sensitive shales

    Energy Technology Data Exchange (ETDEWEB)

    Clark, R.K.; Scheuerman, R.F.; Rath, H.; Van Laar, H.G.

    1976-06-01

    A shale-protective, water-base drilling fluid containing a high molecular-weight, partially hydrolyzed polyacrylamide and potassium chloride has been used in many wells around the world. A laboratory test for evaluating the ability of water-base muds to protect stressed shales under dynamic conditions was used in the initial development of the system. Field application of the polyacrylamide/potassium-chloride mud has been successful in stabilizing hard, sloughing shales in Canada and in reducing shale-related hole problems in several offshore areas. Recent use in the Canadian Arctic has extended the application to weighted muds for drilling soft, mud-producing shales.

  3. Sodium, potassium and chloride status in Australian foods and diets using neutron activation analysis

    International Nuclear Information System (INIS)

    A study of the status of essential, toxic and trace elements in the foods and diets of Australian has been in progress for six years. Results for sodium, potassium and chloride levels are reported here. The average daily dietary intake of sodium and chloride exceeded the range of values recommended by the National Health and Medical Research Council for most population groups with grain and dairy products the main contributor to these high intakes. In contrast, the average daily intakes of potassium fell well within the recommended values for all age groups with intakes for adult females close to the recommended minimum figure. 9 refs., 1 tab., 2 figs

  4. Sodium, potassium and chloride status in Australian foods and diets using neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fardy, J.J.; McOrist, G.D.; Farrar, Y.J.; Bowles, C.J. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1993-12-31

    A study of the status of essential, toxic and trace elements in the foods and diets of Australian has been in progress for six years. Results for sodium, potassium and chloride levels are reported here. The average daily dietary intake of sodium and chloride exceeded the range of values recommended by the National Health and Medical Research Council for most population groups with grain and dairy products the main contributor to these high intakes. In contrast, the average daily intakes of potassium fell well within the recommended values for all age groups with intakes for adult females close to the recommended minimum figure. 9 refs., 1 tab., 2 figs.

  5. Sulfation of Condensed Potassium Chloride by SO2

    DEFF Research Database (Denmark)

    Sengeløv, Louise With; Hansen, Troels Bruun; Bartolomé, Carmen; Wu, Hao; Pedersen, Kim H.; Jappe Frandsen, Flemming; Jensen, Anker Degn; Glarborg, Peter

    2013-01-01

    The interaction between alkali chloride and sulfur oxides has important implications for deposition and corrosion in combustion of biomass. In the present study, the sulfation of particulate KCl (90–125 μm) by SO2 was studied in a fixed bed reactor in the temperature range 673–1023 K and with rea...

  6. Effect of Phosphorus, Potassium, and Chloride Nutrition on Cold Tolerance of Winter Canola (Brassica napus L.)

    Science.gov (United States)

    A field experiment was conducted to determine whether fertility treatments improve cold hardiness of canola (Brassica napus L.). Measurements of chlorophyll fluorescence and overwinter survival of field-grown canola were used to evaluate the effect of chloride (Cl), potassium (K), and phosphorus (P)...

  7. Effects of lithium chloride on outward potassium currents in acutely isolated hippocampal CA1 pyramidal neurons

    Institute of Scientific and Technical Information of China (English)

    ZHANG Chaofeng; DU Huizhi; YANG Pin

    2006-01-01

    Although lithium possesses neuroprotective functions, the molecular mechanism underlying its actions has not been fully elucidated. In the present paper, the effects of lithium chloride on voltage-dependent potassium currents in the CA1 pyramidal neurons acutely isolated from rat hippocampus were studied using the whole-cell patch-clamp technique. Depolarizing test pulses activated two components of outward potassium currents: a rapidly activating and inactivating component, IA and a delayed component, IK. Results showed that lithium chloride increased the amplitude of IA in a concentration-dependent manner. Half enhancement concentration (EC50) was 22.80±5.45 μmol·L-1. Lithium chloride of 25 μmol·L-1 shifted the steady-state activation curve and inactivation curve of IA to more negative potentials, but mainly affected the activation kinetics. The amplitude and the activation processes of IK were not affected by lithium chloride. The effects of lithium chloride on potassium channel appear to possess neuroprotective properties by Ca2+-lowing effects modulate neuronal excitability by activating IA in rat hippocampal neurons.

  8. Adsorption of Tetradecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; Hayashi, Koji; Suzuki, Maki

    2014-01-01

    Surface tension of aqueous NaCl solutions of tetradecylpyridinium chloride (TPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm−3 at 25◦C. Surface excess densities of tetradecylpyridinium ion (TP+), Cl− and Na+ have been obtained as functions of TPC concentration at different NaCl concentrations by applying the Gibbs adsorption isotherm to the surface tension data below the critical micelle concentration (CMC) of TPC. Surface excess densiti...

  9. Adsorption of Dodecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; TAKEUCHI, Kumiko; Suzuki, Maki

    2012-01-01

    Surface tension of aqueous NaCl solutions of dodecylpyridinium chloride (DPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm-3 at 25℃. Applying the Gibbs adsorption isotherm to the surface tension data at DPC concentrations below the critical micelle concentration (CMC), surface excess densities of dodecylpyridinium ion (DP+), Cl- and Na+ have been obtained as functions of DPC concentration at different NaCl concentrations. Surface excess d...

  10. SODIUM-POTASSIUM-CHLORIDE COTRANSPORT IN THE REGULATION OF VASCULAR MYOGENIC TONE

    Directory of Open Access Journals (Sweden)

    S. N. Orlov

    2014-01-01

    Full Text Available The article discusses the data on the functioning of Na+,K+,2Cl– cotransport – the carrier providing electroneutral symport of sodium, potassium and chloride, as well as molecular mechanisms of the regulation and physiological significance of this carrier. We analyzed the novel data on involvement of ubiquitous isoform of Na+,K+,2Cl–cotransporter (NKCC1 in regulation of vascular smooth muscle contraction, and role of this carrier in the regulation of cell volume and intracellular chloride concentration.

  11. Modeling the use of sulfate additives for potassium chloride destruction in biomass combustion

    OpenAIRE

    Wu, Hao; Grell, Morten Nedergaard; Jespersen, Jacob Boll; Aho, Martti; Jappe Frandsen, Flemming; Glarborg, Peter

    2013-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4. In the present study, the decomposition of ammonium sulfate, aluminum sulfate and ferric sulfate was studied respectively in a fast-heating rate thermogravimetric analyzer (TGA) for deriving a kinetic model. The yields of SO2 and SO3 from the decomposition were studied in a tube reactor, revealing t...

  12. Potassium chloride as a euthanasia agent in psittacine birds: Clinical aspects and consequences for histopathologic assessment

    OpenAIRE

    Raghav, Raj; Taylor, Michael; Guincho, Mark; Smith, Dale

    2011-01-01

    Twelve parrots anesthetized with isoflurane were euthanized intravenously (IV) with 3 or 10 mEq/kg body weight (BW) of potassium chloride (KCl) resulting in ventricular asystole at 68.0 s and 32.8 s, respectively. Mild vocalization (1/6 birds, 3 mEq/kg BW) and involuntary muscle tremors (5/6 birds, 10 mEq/kg BW) were noted. Unlike barbiturates or T-61 no histologic artefacts resulted from this technique.

  13. Equilibrium potentials of scandium in equimolar melt of sodium and potassium chlorides

    International Nuclear Information System (INIS)

    Equilibrium potentials of scandium in equimolar melt of sodium and potassium chlorides under scandium(3) concentration in saline melt from 0.48 · 10-2 up to 1.3 · 10-2 mol. sh. were studied within 950-1080 K temperature range. On the basis of the experimental data on EMF of galvanic element one estimated thermodynamic features of equimolar melt and scandium equilibrium potentials in the melt

  14. Permeability of solutes through cellophanes grafted with vinyl monomers. I. Diffusion of potassium chloride, urea, and uric acid

    International Nuclear Information System (INIS)

    The diffusive permeability of potassium chloride, urea, and uric acid through cellophanes grafted with acrylamide, acrylic acid, styrene, and N-vinyl-2-pyrrolidone by γ-ray irradiation was studied. The diffusive permeability coefficients of the permeants through the grafted cellophanes were increased with increase in hydration of the grafted membranes, except for the permeation of potassium chloride through cellophanes grafted with acrylic acid. The permeation of potassium chloride, urea, and uric acid through the various grafted cellophanes is explained by the free volume concept of homogeneously water-swollen membranes. However, the behavior of the permeation of potassium chloride through cellophane grafted with acrylic acid deviated from that of nonionic membranes because of the contribution of the electrical interaction between electrolyte and charge of the membrane. 4 figures, 3 tables

  15. Potassium chloride-bearing ice VII and ice planet dynamics

    Science.gov (United States)

    Frank, Mark R.; Scott, Henry P.; Aarestad, Elizabeth; Prakapenka, Vitali B.

    2016-02-01

    Accurate modeling of planetary interiors requires that the pressure-volume-temperature (PVT) properties of phases present within the body be well understood. The high-pressure polymorphs of H2O have been studied extensively due to the abundance of ice phases in icy moons and, likely, vast number of extra-solar planetary bodies, with only select studies evaluating impurity-laden ices. In this study, ice formed from a 1.6 mol percent KCl-bearing aqueous solution was studied up to 32.89 ± 0.19 GPa and 625 K, and the incorporation of K+ and Cl- ionic impurities into the ice VII structure was documented. The compression data at 295 K were fit with a third order Birch-Murnaghan equation of state and yielded a bulk modulus (KT0), its pressure derivative (KT0‧), and zero pressure volume (V0) of 24.7 ± 0.9 GPa, 4.44 ± 0.09, and 39.2 ± 0.2 Å3, respectively. The impurity-laden ice was found to be 6-8% denser than ice VII formed from pure H2O. Thermal expansion coefficients were also determined for several isothermal compression curves at elevated temperatures, and a PVT equation of state was obtained. The melting curve of ice VII with incorporated K+ and Cl- was estimated by fitting experimental data up to 10.2 ± 0.4 GPa, where melting occurred at 625 K, to the Simon-Glatzel equation. The melting curve of this impurity-laden ice is systematically depressed relative to that of pure H2O by approximately 45 K and 80 K at 4 and 11 GPa, respectively. A portion of the K+ and Cl- contained within the ice VII structure was observed to exsolve with increasing temperature. This suggests that an internal differentiating process could concentrate a K-rich phase deep within H2O-rich planets, and we speculate that this could supply an additional source of heat through the radioactive decay of 40K. Our data illustrate ice VII can incorporate significant concentrations of K+ and Cl- and increasing the possibility of deep-sourced and solute-rich plumes in moderate to large sized H2O

  16. Chemical properties of some elements in a molten lithium chloride, potassium chloride eutectic (1962)

    International Nuclear Information System (INIS)

    The increasing use of molten media especially in chemical preparations and for certain technological applications, has made it more necessary to have a knowledge of the chemical properties of elements in these solvents. Structural studies on molten solutions show the existence of certain species such as ions and complexes known to exist in aqueous solutions. This fact, together with certain experiments on chemical reactions in molten media has led us to establish a comparison between these media and aqueous solutions. We wish to show that the same fundamental phenomena occur in these media as are found in the chemistry of aqueous solutions and that this makes it possible to predict certain reactions. We have taken as examples the chemical properties of vanadium, uranium and sulphur in a LiCl-KCl eutectic melted at 480 deg. C. The first problem is to identify the various degrees of oxidation of these elements existing in the solvent chosen. We have tried to resolve it by comparing the absorption spectra obtained in aqueous solution and in the molten eutectic. We consider the possibilities of this method in a chapter on absorption spectrophotometry in the LiCl-KCl eutectic. During the study of the chemical properties we stress the various methods of displacing the equilibria: complex formation, variation of the oxidation-reduction properties with complex formation. The complexes of the O2- ion are considered in particular. The study of the exchange of this particle is facilitated by the use of a classification of some of its complexes which we call the pO2- scale by analogy with the pH scale; the value pO2- is defined by the relationship: pO2- = log O2- Similarly, the use of apparent potential diagrams pO2- makes it possible to predict and to interpret reactions involving the simultaneous exchange of electrons and O2- ions between the various degrees of oxidation of the same element. It is possible, by studying some reactions of this type between two elements. We

  17. Modeling of ferric sulfate decomposition and sulfation of potassium chloride during grate‐firing of biomass

    DEFF Research Database (Denmark)

    Wu, Hao; Jespersen, Jacob Boll; Jappe Frandsen, Flemming;

    2013-01-01

    Ferric sulfate is used as an additive in biomass combustion to convert the released potassium chloride to the less harmful potassium sulfate. The decomposition of ferric sulfate is studied in a fast heating rate thermogravimetric analyzer and a volumetric reaction model is proposed to describe the...... process. The yields of sulfur oxides from ferric sulfate decomposition under boiler conditions are investigated experimentally, revealing a distribution of approximately 40% SO3 and 60% SO2. The ferric sulfate decomposition model is combined with a detailed kinetic model of gas‐phase KCl sulfation and a...... model of K2SO4 condensation to simulate the sulfation of KCl by ferric sulfate addition. The simulation results show good agreements with experiments conducted in a biomass grate‐firing reactor. The results indicate that the SO3 released from ferric sulfate decomposition is the main contributor to KCl...

  18. Aqueous alteration of potassium-bearing aluminosilicate minerals: from mechanism to processing

    OpenAIRE

    Skorina, Taisiya; Allanore, Antoine

    2014-01-01

    The anticipated increase in demand for potassium fertilizers and alumina from developing nations experiencing a high-rate of population growth brings a global sustainability concern. Most of these countries do not have economically viable resources for both commodities; and the environmental footprint of existing technologies may compromise local ecosystems. Alternatives, both in terms of resources and extraction technologies, are therefore needed. Aqueous alteration of potassium-bearing alum...

  19. Influence of potassium chloride on diffusion of 2-hydroxypropyl-β cyclodextrin and β-cyclodextrin at T = 298.15 K and T = 310.15 K

    International Nuclear Information System (INIS)

    Highlights: ► Ternary diffusion coefficients for the systems KCl/βCD/H2O and KCl/HP-βCD/H2O. ► Influence of the KCl on diffusion of some cyclodextrins in the aqueous media. ► Estimation of the association constants of the complexes KCl/βCD and KCl/HP-βCD. - Abstract: Ternary mutual diffusion coefficients measured by the Taylor dispersion method (D11, D22, D12 and D21) are reported for two aqueous systems, that is, potassium chloride and 2-hydroxypropyl-β-cyclodextrin (HP-βCD), and potassium chloride and β-cyclodextrin (βCD) at T = 298.15 K and T = 310.15 K, and at carrier concentrations from (0.000 to 0.010) mol·dm−3 for each solute. Based on these data, some conclusions about the influence of KCl on the diffusion of the cyclodextrins (HP-βCD and βCD) were made, and the association constants of the complexes formed between the two components for each system (KCl and βCD, and KCl and HP-βCD) were estimated.

  20. Enthalpies of potassium iodide dissolution in isopropanol aqueous solutions

    International Nuclear Information System (INIS)

    At 298.15 K in air-tight microcalorimeter with isothermal shell enthalpies of potassium iodide dissolution in water and in water-isopropyl alcohol mixtures (5,10,20,30,50 and 70 mol.%) are measured. Dissolution enthalpies during infinite dilution in the above-mentioned mixed solvents are determined

  1. Potassium

    Science.gov (United States)

    ... stimulation and in the contraction of muscles. Cellular enzymes need potassium to work properly. A potassium deficiency ... or prune juice, honeydew melons, prunes, molasses and potatoes. Some foods high in potassium are also high ...

  2. Interaction between lactose and cadmium chloride in aqueous solutions as seen by diffusion coefficients measurements

    International Nuclear Information System (INIS)

    Highlights: ► Diffusion coefficients of aqueous systems containing lactose and cadmium chloride. ► Influence of the lactose on the diffusion of cadmium chloride. ► Interactions between Cd2+ and lactose. -- Abstract: Diffusion coefficients of an aqueous system containing cadmium chloride 0.100 mol · dm−3 and lactose at different concentrations at 25 °C have been measured, using a conductimetric cell and an automatic apparatus to follow diffusion. The cell relies on an open-ended capillary method and a conductimetric technique is used to follow the diffusion process by measuring the resistance of a solution inside the capillaries, at recorded times. From these results and by ab initio calculations, it was possible to obtain a better understanding of the effect of lactose on transport of cadmium chloride in aqueous solutions

  3. The Reaction between Iron(II) Iodide and Potassium Dichromate(VI) in Acidified Aqueous Solution

    Science.gov (United States)

    Talbot, Christopher

    2013-01-01

    This "Science note" teaching lesson explores the possible reaction between the ions in a reaction mixture consisting of iron(II) iodide and potassium dichromate(VI) in acidified aqueous solution. The electrode potentials will be used to deduce any spontaneous reactions under standard thermodynamic conditions (298 K, 1 bar (approximately…

  4. TG-FTIR Study of the Influence of potassium Chloride on Wheat Straw Pyrolysis

    DEFF Research Database (Denmark)

    Jensen, Anker; Dam-Johansen, Kim; Wójtowicz, M.A.;

    1998-01-01

    The interest in utilizing biomass as a CO2 neutral fuel by combustion, gasification or pyrolysis processes is increasing due to concern about the emission of green house gases from fossil fuel combustion. In thermal fuel conversion, pyrolysis is an important step which determines the split of...... products into char, tar and gas. In this work, a combination of thermogravimetry and evolved gas analysis by Fourier transform infrared analysis (TG-FTIR) has been applied to study the influence of potassium chloride (KCl) on wheat straw pyrolysis. Raw straw, washed straw and washed straw impregnated with...... KCl has been investigated. To facilitate interpretation of the results, pyrolysis of biopolymers (cellulose, xylan, lignin) in the presence and absence of KCl was investigated as well. The raw straw decomposed in a single broad featureless peak. By washing, two peaks appeared in the derivative weight...

  5. Modeling the use of sulfate additives for potassium chloride destruction in biomass combustion

    DEFF Research Database (Denmark)

    Wu, Hao; Grell, Morten Nedergaard; Jespersen, Jacob Boll;

    2013-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4. In the present study, the decomposition of ammonium sulfate, aluminum sulfate and ferric sulfate was...... studied respectively in a fast-heating rate thermogravimetric analyzer (TGA) for deriving a kinetic model. The yields of SO2 and SO3 from the decomposition were studied in a tube reactor, revealing that the ratio of the SO3/SO2 released varied for different sulfate and for ammonium sulfate the ratio was...... affected by the decomposition temperature. Based on the experimental data, a model was proposed to simulate the sulfation of KCl by different sulfate addition, and the simulation results were compared with pilot-scale experiments conducted in a bubbling fluidized bed reactor. The simulation results of...

  6. Modeling of sulfation of potassium chloride by ferric sulfate addition during grate-firing of biomass

    DEFF Research Database (Denmark)

    Wu, Hao; Jespersen, Jacob Boll; Aho, Martti;

    2013-01-01

    Potassium chloride, KCl, formed from critical ash-forming elements released during combustion may lead to severe ash deposition and corrosion problems in biomass-fired boilers. Ferric sulfate, Fe2(SO4)3 is an effective additive, which produces sulfur oxides (SO2 and SO3) to convert KCl to the less...... order to simulate the sulfation of KCl by ferric sulfate addition during grate-firing of biomass. The simulation results show good agreements with the experimental data obtained in a pilot-scale biomass grate-firing reactor, where different amounts of ferric sulfate was injected on the grate or into the...... freeboard. In addition, the simulations of elemental sulfur addition on the grate fit well with the experimental data. The results suggest that the SO3 released from ferric sulfate decomposition is the main contributor to KCl sulfation, and that the effectiveness of the ferric sulfate addition is sensitive...

  7. Thermal glow curves from quenched pure and doped potassium chloride single crystal

    International Nuclear Information System (INIS)

    Thermoluminescence property of quenched potassium chloride, pure and doped with PbCl2, has been studied. Quenching from 650degC enhances the glow output by a much larger amount than can be explained on the basis of enhancement of F-centres formation in quenched samples. Moreover, the glow peaks which are associated with divalent impurities and first stage of colouration are amply intensified due to quenching. Electrolytic colouration, which involved quenching, however, diminishes the integrated light output, when the coloured crystal is exposed to X-rays and warmed up. These results have been explained on the basis of the fact that the recombination efficiency of electrons and holes can be changed by various pretreatment of the samples. A new peak in the glow curve of quenched has also been observed. (author)

  8. Modeling the Use of Sulfate Additives for Potassium Chloride Destruction in Biomass Combustion

    DEFF Research Database (Denmark)

    Wu, Hao; Pedersen, Morten Nedergaard; Jespersen, Jacob Boll;

    2014-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4 and HCl. In the present study, the rate constants for decomposition of ammonium sulfate and aluminum......-dependent distribution of SO2 and SO3 from ammonium sulfate decomposition. On the basis of these data as well as earlier results, a detailed chemical kinetic model for sulfation of KCl by a range of sulfate additives was established. Modeling results were compared to biomass combustion experiments in a bubbling...... fluidized-bed reactor using ammonium sulfate, aluminum sulfate, and ferric sulfate as additives. The simulation results for ammonium sulfate and ferric sulfate addition compared favorably to the experiments. The predictions for aluminum sulfate addition were only partly in agreement with the experimental...

  9. TG-FTIR Study of the Influence of potassium Chloride on Wheat Straw Pyrolysis

    DEFF Research Database (Denmark)

    Jensen, Anker; Dam-Johansen, Kim; Wójtowicz, M.A.;

    1998-01-01

    The interest in utilizing biomass as a CO2 neutral fuel by combustion, gasification or pyrolysis processes is increasing due to concern about the emission of green house gases from fossil fuel combustion. In thermal fuel conversion, pyrolysis is an important step which determines the split of...... biomass. Combustion of the char remaining after pyrolysis showed that char combustion is catalyzed by the minerals present in wheat straw. Char from the washed straw with KCl added burned with two peaks in the derivative weight loss curve corresponding to a catalyzed and non-catalyzed part, indicating...... products into char, tar and gas. In this work, a combination of thermogravimetry and evolved gas analysis by Fourier transform infrared analysis (TG-FTIR) has been applied to study the influence of potassium chloride (KCl) on wheat straw pyrolysis. Raw straw, washed straw and washed straw impregnated with...

  10. Comparative measurements of potassium and chloride with ion-sensitive microelectrodes and x-ray microanalysis in cultured skeletal muscle fibers

    International Nuclear Information System (INIS)

    Data of the intracellular electrolyte concentration of potassium and chloride in cultured muscle cells measured by x-ray analysis were compared by using the different activity coefficients with intracellular potassium and chloride activities measured with double-barrelled microelectrodes. By using an activity coefficient of 0.6, 95% of the potassium microelectrode measurements are in accordance with the x-ray analysis values, in spite of a scattering of the values. Membrane potential and intracellular potassium values are linearly related. x-ray analysis and ion-sensitive microelectrodes measured the cytoplasmic chloride in the same range. Taking into account known activity coefficients, an error of 25% must be assumed with the intracellular chloride measurements. However, x-ray analysis and ion-sensitive microelectrode investigations are reliable tools to study intracellular potassium and chloride changes, which play an important role in membrane characteristics

  11. Electrical conductivity measurements of aqueous and immobilized potassium hydroxide

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mollerup, Pia Lolk;

    2012-01-01

    It is important to know the conductivity of the electrolyte of an alkaline electrolysis cell at a given temperature and concentration so as to reduce the ohmic loss during electrolysis through optimal cell and system design. The conductivity of aqueous KOH at elevated temperatures and high concen...

  12. Potassium chloride supplementation alone may not improve hypokalemia in thyrotoxic hypokalemic periodic paralysis.

    Science.gov (United States)

    Yu, Tsuan-Shih; Tseng, Chin-Feng; Chuang, Ying-Yen; Yeung, Lai-King; Lu, Kuo-Cheng

    2007-04-01

    This article reports a 29-year-old man who came to the Emergency Department because of sudden onset of bilateral lower extremity weakness and inability to walk after intake of a high carbohydrate meal and alcohol. He was found to have severe hypokalemia, with K(+) level at 1.7 mmol/L. However, after administration of potassium chloride (KCl), 10 mEq/h intravenous (i.v.) drip for 4 h, follow-up serum potassium was even lower at 1.5 mmol/L and the patient complained of persistent weakness. Twenty mg of propranolol, a non-selective beta-blocker, was given orally and a dramatic improvement of muscle power to grade 5 was noted after 30 min of administration. On the fifth day after discharge, he had another episode of bilateral lower extremity weakness after ingesting a mouthful of alcohol. Muscle power recovered completely after i.v. drip of KCl, 20 mEq. Laboratory data revealed an underlying primary hyperthyroidism for which he was given anti-thyroid agents and beta-blockers. PMID:17394988

  13. Radiation education for high school students by measurement sharing method using radiation sources fabricated from potassium chloride chemicals

    International Nuclear Information System (INIS)

    In the National Institute for Fusion Science, various exercises are practiced for high school students. One of the exercises is an environmental radiation measurement. In the recent exercise we began to use potassium chloride radiation sources that contained the naturally occurring radioisotope potassium-40. In this study, a measurement sharing method was first applied to the measurements. Through the exercise, students understood the existence of natural radiation and radioisotopes around us, and learned the three principles of radiation protection. According to the questionnaire survey conducted after the exercise, it was found that the environmental radiation measurement by the measurement sharing method using potassium chloride radiation sources was favorably received by many high school students. (author)

  14. Henry’s constant of carbon dioxide-aqueous deep eutectic solvent (choline chloride/ethylene glycol, choline chloride/glycerol, choline chloride/malonic acid) systems

    International Nuclear Information System (INIS)

    Highlights: • A new set of Henry’s constant for the system carbon dioxide-aqueous deep eutectic solvents were measured. • The DESs used were: ethaline, glyceline, and maline. • The measured data were reported as functions of temperature and composition. • The measured data were represented satisfactorily by the applied correlations. -- Abstract: In this study, we present a new set of Henry’s constant data for the system carbon dioxide-aqueous deep eutectic solvent (DES) (20 to 80 wt% DES) at T = (303.15, 308.15, and 313.15) K. The DESs used were choline chloride-based: ethaline (choline chloride/ethylene glycol), glyceline (choline chloride/glycerol), and maline (choline chloride/malonic acid). A differential Henry’s coefficient model was used to describe the behaviour of Henry’s constant, and correlate it with temperature and concentration of DES in the aqueous DES solution. The correlation was found satisfactory such that the proposed model can be used in engineering calculations with reasonable accuracy

  15. Aqueous chloride stress corrosion cracking of titanium - A comparison with environmental hydrogen embrittlement

    Science.gov (United States)

    Nelson, H. G.

    1974-01-01

    The physical characteristics of stress corrosion cracking of titanium in an aqueous chloride environment are compared with those of embrittlement of titanium by a gaseous hydrogen environment in an effort to help contribute to the understanding of the possible role of hydrogen in the complex stress corrosion cracking process. Based on previous studies, the two forms of embrittlement are shown to be similar at low hydrogen pressures (100 N/sq m) but dissimilar at higher hydrogen pressures. In an effort to quantify this comparison, tests were conducted in an aqueous chloride solution using the same material and test techniques as had previously been employed in a gaseous hydrogen environment. The results of these tests strongly support models based on hydrogen as the embrittling species in an aqueous chloride environment.

  16. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-22

    Acqueous Chloride mission is to recover plutonium and americium from pyrochemical residues (undesirable form for utilization and storage) and generate plutonium oxide and americium oxide. Plutonium oxide is recycled into Pu metal production flowsheet. It is suitable for storage. Americium oxide is a valuable product, sold through the DOE-OS isotope sales program.

  17. Potassium

    Science.gov (United States)

    Potassium is a mineral that the body needs to work normally. It helps nerves and muscles communicate. ... products out of cells. A diet rich in potassium helps to offset some of sodium's harmful effects ...

  18. Binary Nucleation in Aqueous Electrolyte Systems. Sodium Chloride

    Czech Academy of Sciences Publication Activity Database

    Němec, Tomáš; Maršík, František

    Gdansk: IFFM Publishers, 2005 - (Mikielewicz, J.; Butrymowicz, D.; Trela, M.; Cieslinski, J.), s. 395-400 ISBN 83-88237-90-X. [HEAT 2005 : International Conference on Transport Phenomena in Multiphase Systems. Gdansk (PL), 26.06.2005-30.06.2005] R&D Projects: GA ČR(CZ) GA101/05/2536 Institutional research plan: CEZ:AV0Z20760514 Keywords : binary nucleation * sodium chloride * water Subject RIV: BJ - Thermodynamics

  19. OXIDATIVE POLYMERIZATION BEHAVIOR OF 2,6-DIMETHYLPHENOL IN AQUEOUS MEDIA WITH POTASSIUM FERRICYANIDE

    Institute of Scientific and Technical Information of China (English)

    Cheng Gu; Jin-hua Zhu; Bao-qing Shentu; Qun Liu; Zhi-xue Weng

    2009-01-01

    The effects of potassium ferricyanide, sodium n-dodecyl sulfate, sodium hydroxide and temperature on the molecular weight and the yield of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in an aqueous medium were studied. It was found that oxygen in air had little influence on the oxidative polymerization of 2,6-dimethylphenol (DMP) in the aqueous medium, and potassium ferricyanide was only an oxidant during the oxidative polymerization of DMP. Sodium n-dodecyl sulfate could stabilize polymer particles and facilitate the oxidative polymerization of DMP on the surface of polymer particles, which resulted in the increase of the molecular weight of PPO. The yield and molecular weight of PPO increased significantly with NaOH concentration at first and then decreased with NaOH concentration. The high molecular weight PPO with high yield was obtained at 50℃, but both the yield and molecular weight of PPO decreased with the further increase of temperature.

  20. Aqueous DMSO Mediated Conversion of (2-(Arylsulfonyl)vinyl)iodonium Salts to Aldehydes and Vinyl Chlorides.

    Science.gov (United States)

    Zawia, Eman; Moran, Wesley J

    2016-01-01

    Vinyl(aryl)iodonium salts are useful compounds in organic synthesis but they are under-utilized and their chemistry is under-developed. Herein is described the solvolysis of some vinyl(phenyl)iodonium salts, bearing an arylsulfonyl group, in aqueous DMSO leading to aldehyde formation. This unusual process is selective and operates under ambient conditions. Furthermore, the addition of aqueous HCl and DMSO to these vinyl(aryl)iodonium salts allows their facile conversion to vinyl chlorides. PMID:27537866

  1. Allium sativum aqueous extract prevents potassium dichromate-induced nephrotoxicity and lipid oxidation in rats

    OpenAIRE

    Sergio L. Becerra-Torres; César Soria-Fregozo; Fernando Jaramillo-Juárez; José L. Moreno-Hernández-Duque

    2014-01-01

    Context: The potassium dichromate (K2Cr2O7) induces nephrotoxicity by oxidative stress mechanisms. Aims: To study the potential protection of an aqueous extract of Allium sativum against the K2Cr2O7-induced nephrotoxicity and lipid oxidation in rats. Methods: Twenty four hours after treatment, biomarkers such as proteinuria, creatinine clearance, malondialdehyde production, specific enzyme activity of gamma glutamyl transpeptidase and alanine aminopeptidase, and renal clearance of para-...

  2. Aqueous chloride stress corrosion cracking of titanium: A comparison with environmental hydrogen embrittlement

    Science.gov (United States)

    Nelson, H. G.

    1973-01-01

    The physical characteristics of stress corrosion cracking of titanium in an aqueous chloride environment are compared with those of embrittlement of titanium by a gaseous hydrogen environment in an effort to help contribute to the understanding of the possible role of hydrogen in the complex stress corrosion cracking process. Based on previous studies, the two forms of embrittlement are shown to be similar at low hydrogen pressures (100 N/sqm) but dissimilar at higher hydrogen pressures. In an effort to quantify this comparison, tests were conducted in an aqueous chloride solution using the same material and test techniques as had previously been employed in a gaseous hydrogen environment. The results of these tests strongly support models based on hydrogen as the embrittling species in an aqueous chloride environment. Further, it is shown that if hydrogen is the causal species, the effective hydrogen fugacity at the surface of titanium exposed to an aqueous chloride environment is equivalent to a molecular hydrogen pressure of approximately 10 N/sqm.

  3. Soret diffusion processes in aqueous sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Cygan, R.T.

    1985-01-01

    The mass transport of chemical species induced by a temperature gradient, commonly known as Soret diffusion, has been examined for the case of the sodium chloride and water system. The occurrence of significant thermal gradients in geological media, especially those associated with radioactive waste disposal sites, can produce a measurable flux of sodium chloride and therefore enrich the local solutions. Soret coefficients, or the ratio of thermal to isothermal mass transport factors, describe this rate of mass transfer and are necessary for evaluating certain nonequilibrium processes, such as the migration of fluid inclusions in rock salt. Experimental Soret coefficients for the NaCl-H/sub 2/O system were obtained by the use of a conductimetric thermal diffusion cell. This approach relies on monitoring the electrical conductivity change of two separate isothermal reservoirs which are maintained at different temperatures. The Soret cell is situated between the reservoirs and is comprised of an inert matrix of glass beads in order to minimize any solution convection. The utilization of this porous medium requires corrections for porosity and tortuosity. Measurements were made for 0.1 and 1.0 N NaCl solutions at mean temperatures of 40/sup 0/C and 50/sup 0/C with the mass transport induced by a thermal gradient of 2.6/sup 0/C/cm. The preliminary results indicate a Soret separation on the order of 1 to 2 percent with the attainment of a steady state in approximately 15 hours.

  4. Research of Potassium Chloride Salt Tail Using of Potassium Mixed Salt Production%钾混盐矿生产氯化钾尾盐利用研究

    Institute of Scientific and Technical Information of China (English)

    张秀梅; 余明祥; 苏延平

    2013-01-01

    We used fresh water to dissolve the vice tail salt of potassium chloride production workshop.Then we mixed the brine with the new and old brine,observed its evaporation crystallization course,and proveded important data for tail salt mineralization reusing.%将氯化钾车间副产尾盐用淡水溶解后,用新老卤进行兑卤,观测其蒸发结晶路线,为尾盐的成矿再利用提供重要数据参数.

  5. Zinc chloride aqueous solution as a solvent for starch.

    Science.gov (United States)

    Lin, Meiying; Shang, Xiaoqin; Liu, Peng; Xie, Fengwei; Chen, Xiaodong; Sun, Yongyi; Wan, Junyan

    2016-01-20

    It is important to obtain starch-based homogeneous systems for starch modification. Regarding this, an important key point is to find cheap, low-cost and low-toxicity solvents to allow complete dissolution of starch and its easy regeneration. This study reveals that a ZnCl2 aqueous solution is a good non-derivatizing solvent for starch at 50 °C, and can completely dissolve starch granules. The possible formation of a "zinc-starch complex" might account for the dissolution; and the degradation of starch, which was caused by the H(+) inZnCl2 aqueous solution, could not contribute to full dissolution. From polarized light microscopic observation combined with the solution turbidity results, it was found that the lowest ZnCl2 concentration for full dissolution was 29.6 wt.% at 50 °C, with the dissolving time being 4h. Using Fourier-transform infrared (FTIR), solid state (13)C nuclear magnetic resonance (NMR), and X-ray diffraction (XRD), it was revealed that ZnCl2 solution had no chemical reaction with starch glucosides, but only weakened starch hydrogen bonding and converted the crystalline regions to amorphous regions. In addition, as shown by intrinsic viscosity and thermogravimetric analysis (TGA), ZnCl2 solution caused degradation of starch macromolecules, which was more serious with a higher concentration of ZnCl2 solution. PMID:26572355

  6. The role of oxygen in the photostimulated luminescence process of europium doped potassium chloride

    International Nuclear Information System (INIS)

    A recent suggestion that europium doped potassium chloride (KCl:Eu2+) has the potential to significantly advance the state-of-the-art in radiation therapy dosimetry has generated a renewed interest in a classic storage phosphor material. The purposes of this work are to investigate the role of oxygen in the photostimulated luminescence (PSL) process and to determine if both increased PSL yield and improved temporal stability could be realized in KCl:Eu2+ by incorporating oxygen in the material fabrication process. Regardless of synthesis atmosphere, air or pure nitrogen, PSL amplitude shows a maximum at 1.0 mol % Eu. Depending on europium concentration, dosimeters fabricated in air exhibit stronger PSL by a factor of 2–4 compared to those made in N2. There is no change in PSL stimulation spectrum while noticeable shifts in both photoluminescence and PSL emission spectra are observed for air vs. nitrogen. Almost all charge-storage centers are spatially correlated, suggesting oxygen's stabilization role in the PSL process. However, oxygen alone does not improve material's temporal stability in the first few hours post irradiation at room temperature, probably because a significant portion of radiation-induced holes are stored in the Vk centers which are mobile. - Highlights: • Higher PSL intensity is obtained for dosimeters made in air than in pure nitrogen. • Shifts in emission peaks are observed for air vs. nitrogen. • All charge-storage centers are spatially correlated, suggesting the stabilization role of oxygen. • There is no improvement in temporal stability at RT for an air sample. • Oxygen improves the stability at lower temperature, for example, 50 K

  7. Relationship between potassium chloride suppression of corn stalk rot and soil microorganism characteristics

    Institute of Scientific and Technical Information of China (English)

    LIU Xiaoyan; JIN Jiyun; HE Ping; LIU Hailong; LI Wenjuan

    2007-01-01

    Observations from a site-fixed field trial of 12 years in Jilin Province show that potassium chloride (KC1)application has a significant positive influence on corn stalk rot incidence.Incubation experiments were conducted to study the effects of KC1 and soil extracts on the growth of Fusarium graminearum,the most common stalk rot fungi in this area,and the population changes in rhizosphere fungi,bacteria and actinomyces at different growth stages of corn.The results show that KC1 addition to the potato dextrose agar (PDA) medium could not directly suppress Fusarium graminearum development.Soil extracts from soil samples taken from the field plots with and without KC1 application affected Fusarium graminearum development,with soil extracts with KC1 treatments suppressing Fusarium graminearum development more significantly,compared with that from the KC1-free treatment.These results indicate that soil extracts play a role in the interaction between corn and Fusarium graminearum.Long-term KC1 application may increase the populations of rhizosphere fungi and actinomyces in the early growth stages,while there is no significant difference in the number of bacteria in rhizosphere among the treatments.Also,the populations of rhizosphere fungi are negatively correlated with the incidence of stalk rot in the early growth stages of corn.The sensitive infection stages of pathogen to corn consist of the stages when there is significant difference in the populations of rhizosphere fungi and actinomyces.The change of microorganism populations (especially fungi) in soil may be associated with the incidence decrease and is one of the mechanisms of KC1 suppressing corn stalk rot.

  8. Lead removal from aqueous solutions by potassium titanate doped with silica

    International Nuclear Information System (INIS)

    This paper is related to elimination of Pb2+ ions from aqueous solutions by adsorption in potassium tetra titanate doped with silica. The adsorbent was prepared in the form of granules with pastes of potassium poly titanate (45 %), powdered Pyrex glass (5 %) and potato starch (50 %), which were extruded and thermally treated at 1100 C. The structural characteristic of the granulated adsorbent allows reducing the Pb concentration, from the solutions eluted through an adsorption column, to levels below the requirement of national standards. The effects of the time of saturation of the adsorbent and the ph of the solution were also investigated on the effectiveness of the adsorption of Pb. The mechanism of lead adsorption, by the developed adsorbent, is considered as a combination of adsorption, ion-exchange and co-precipitation processes. It is also shown that the lead-saturated adsorbent could be utilized to produce high-strength non-dangerous ceramic materials. (Author)

  9. Potassium

    Science.gov (United States)

    ... Take all forms of potassium with a full glass of water or fruit juice.Add the liquid ... to your pharmacist or contact your local garbage/recycling department to learn about take-back programs in ...

  10. Kinetics of absorption of carbon dioxide into aqueous potassium salt of proline

    DEFF Research Database (Denmark)

    Paul, Subham; Thomsen, Kaj

    2012-01-01

    with KPr for the above mentioned concentration and temperature range. Following the reaction mechanism of CO2 with primary and secondary alkanolamies, the reaction of CO2 with KPr is also described using zwitterionic mechanism. Based on the pseudo-first-order condition for the CO2 absorption, the......The absorption of carbon dioxide (CO2) into aqueous solution of potassium prolinate (KPr) are studied at 303, 313, and 323K within the salt concentration range of 0.5–3.0kmolm−3 using a wetted wall column absorber. The experimental results are used to interpret the kinetics of the reaction of CO2...

  11. Water rotational jump driven large amplitude molecular motions of nitrate ions in aqueous potassium nitrate solution

    CERN Document Server

    Banerjee, Puja; Bagchi, Biman

    2016-01-01

    Molecular dynamics simulations of aqueous potassium nitrate solution reveal a highly complex rotational dynamics of nitrate ions where, superimposed on the expected continuous Brownian motion, are large amplitude angular jumps that are coupled to and at least partly driven by similar large amplitude jump motions in water molecules which are associated with change in the hydrogen bonded water molecule. These jumps contribute significantly to rotational and translational motions of these ions. We explore the detailed mechanism of these correlated (or, coupled) jumps and introduce a new time correlation function to decompose the coupled orientational- jump dynamics of solvent and solute in the aqueous electrolytic solution. Time correlation function provides for the unequivocal determination of the time constant involved in orientational dynamics originating from making and breaking of hydrogen bonds. We discover two distinct mechanisms-both are coupled to density fluctuation but are of different types.

  12. Allium sativum aqueous extract prevents potassium dichromate-induced nephrotoxicity and lipid oxidation in rats

    Directory of Open Access Journals (Sweden)

    Sergio L. Becerra-Torres

    2014-04-01

    Full Text Available Context: The potassium dichromate (K2Cr2O7 induces nephrotoxicity by oxidative stress mechanisms. Aims: To study the potential protection of an aqueous extract of Allium sativum against the K2Cr2O7-induced nephrotoxicity and lipid oxidation in rats. Methods: Twenty four hours after treatment, biomarkers such as proteinuria, creatinine clearance, malondialdehyde production, specific enzyme activity of gamma glutamyl transpeptidase and alanine aminopeptidase, and renal clearance of para-aminohippuric acid and inulin were measured. Results: The K2Cr2O7 caused significant renal dysfunction, but A. sativum extract prevented this condition by improving all measured biomarkers. Conclusions: A single injection of K2Cr2O7 induced nephrotoxicity in rats, but the supply of an Allium sativum aqueous extract prevented the disorders caused by this metal.

  13. Chemical treatment of aqueous radioactive Cesium-137 waste using Ferri Chloride

    International Nuclear Information System (INIS)

    Ferric Chloride 6H2O was used for treatment of liquid radioactive wastes containing Cesium-137. Various concentration of ferric chloride 6H2O have been added into the waste at different pH and speed of stirrer. The treatment was based on the coagulans-flocculation and coprecipitation mechanisms. The best result of this experiment was achieved by adding 300 ppm of Ferric chloride 6 H2O into liquid waste on following condition the rate Stirrer was 250 rpm. At this condition, it was found that the separation efficiency and the decontamination factor were 83.32 % and 5.99. The activity of decreasing of aqueous radioactive Cesium-137 waste was 2.10 x 10-4 Ci/l to 3.50 x 10-5 Ci/l

  14. Pressure-induced unfolding of lysozyme in aqueous guanidinium chloride solution

    OpenAIRE

    Sasahara, K; Nitta, K

    1999-01-01

    The pressure-induced unfolding of lysozyme was investigated in an aqueous guanidinium chloride solution by means of ultraviolet spectroscopy. Assuming a two-state transition model, volume changes were calculated from the slope of free energy vs. pressure plots over a temperature range of 10 to 60 degrees C. Between 25 and 60 degrees C, almost constant volume changes were observed in the transition region, which was reflected in almost identical slopes of the free energy change vs. pressure pl...

  15. Pressure-induced unfolding of lysozyme in aqueous guanidinium chloride solution.

    OpenAIRE

    Sasahara, K; Nitta, K

    1999-01-01

    The pressure-induced unfolding of lysozyme was investigated in an aqueous guanidinium chloride solution by means of ultraviolet spectroscopy. Assuming a two-state transition model, volume changes were calculated from the slope of free energy vs. pressure plots over a temperature range of 10 to 60 degrees C. Between 25 and 60 degrees C, almost constant volume changes were observed in the transition region, which was reflected in almost identical slopes of the free energy change vs. pressure pl...

  16. Removal of lead and nickel from aqueous solutions by SiO2 doped potassium titanate

    International Nuclear Information System (INIS)

    This paper is related to the elimination of Pb2+ and Ni2+ ions from aqueous solutions by adsorption in potassium tetratitanate doped with silica. The adsorbent was prepared in the form of pellets from potassium polytitanate (45 W%), powdered Pyrex glass (5 W%) and potato starch pastes (50 W%), which were extruded and heat treated at 1100 deg. C. The physicochemical characteristics of the granulated adsorbent allow the retention of lead from the aqueous solutions when passed through of an adsorption column, and the lead concentration in wastewater can fulfill the maximum permissible limits of national regulations. The experimental techniques used were: ICP, SEM, BET, Mercury Porosimetry and XRD. The nickel ions removal was carried out in sets of systems batches. The effects of the time on flow of the adsorbent and the pH of the solution on the effectiveness of the adsorption of Pb were also investigated. The maximum amounts removed of lead and nickel were 28 and 19.9 mg/g in batch sets. The mechanism of lead and nickel retention on the developed adsorbent is considered as a combination of adsorption, ion-exchange and precipitation processes. At basic pH values and with the adsorption results obtained in this paper proposes a kind of complex surface based on the formation of metal hydroxide on the surface of the original adsorbent. It is also shown that the lead-saturated adsorbent could be stabilized by means of a heat treatment.

  17. Protective effect of butylated hydroxytoluene (BHT) against the clastogenic acitivity of cadmium chloride and potassium dichromate in hamster ovary cells

    OpenAIRE

    Grillo Claudia A.; Seoane Analía I.; Dulout Fernando N.

    1999-01-01

    The effect of butylated hydroxytoluene (BHT), a widely used food additive, on chromosomal alterations induced by cadmium chloride (CC) and potassium dichromate (PD) in Chinese hamster ovary (CHO) cells was studied both at metaphase and anaphase-telophase. CHO cells were cultured for 15-16 h in the presence of PD (6.0, 9.0 or 12.0 mM), BHT (1.0 mg/ml), or PD plus BHT as well as CC (0.5, 1.0 and 2.0 mM), BHT or CC plus BHT for the analysis of chromosomal aberrations. To perform the anaphase-tel...

  18. Photothermal Conversion of F-centres in Additively Coloured Potassium Chloride Crystals with Cationic and Anionic Impurities

    Directory of Open Access Journals (Sweden)

    Vladimirov D.A.

    2004-12-01

    Full Text Available The compensating influence of cationic (Ca++ ions and anionic (OH– ions impurities doped into additively coloured potassium chloride crystal on the process of photothermal conversion of F-centres is detected. “Brightening” in the absorption band of the F-centres is revealed that achieves 90%. It is not accompanied by the appearance of centres absorbing in the visible range. Double vacancies and the complexes Ca++(OH–2-cationic vacancy are shown to be responsible for this phenomenon. Basing on those results, a new system for holographic recording is suggested that uses the compensating effect of cationic and anionic impurities .

  19. Effect of different concentrations of potassium silicate, nano-silicon and calcium chloride on concentration of potassium, calcium and magnesium, chlorophyll content and number of florets of Asiatic lily cv. ‘Brunello’

    OpenAIRE

    N. Mirabbasi; A. Nikbakht; N. Etemadi; M.R. Sabzalian

    2013-01-01

    Production of many cut flowers, such as lilium, is very common in Iran. Flower quality has special importance in lilium flower production process, and proper nutrition is one of the major effective factors. This research was conducted to investigate the effect of different concentrations of potassium silicate, nano-silicon and calcium chloride on concentration of potassium, calcium and magnesium, chlorophyll index and number of florets of Asiatic lily 'Brunello'. The experiment was carried ou...

  20. A chemical probe technique for the determination of reactive halogen species in aqueous solution: Part 2 – chloride solutions and mixed bromide/chloride solutions

    Directory of Open Access Journals (Sweden)

    C. Anastasio

    2006-02-01

    Full Text Available Although reactive halogen species (X*=X●, ●X2−, X2 and HOX, where X=Br, Cl, or I are important environmental oxidants, relatively little is known about their kinetics in condensed phases such as seawater and sea-salt particles. Here we describe a new technique to determine reactive chlorine and bromine species in aqueous solutions by using allyl alcohol (CH2=CHCH2OH as a chemical probe. This probe is combined with competition kinetics in order to determine steady state concentrations of X*(aq. In some cases the technique also can be used to determine the rates of formation and lifetimes of X* in aqueous solution. In a companion paper we reported the results of our method development for aqueous solutions containing only bromide (Br−. In this paper, we discuss method development for solutions containing chloride (Cl− alone, and for solutions containing both bromide and chloride.

  1. A hybridization approach to efficient TiO{sub 2} photodegradation of aqueous benzalkonium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Suchithra, Padmajan Sasikala, E-mail: schithraps@gmail.com [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium); Carleer, Robert [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium); Ananthakumar, Solaippan [Materials Science and Technology Division, National Institute for Interdisciplinary Science and Technology (CSIR), Trivandrum 695019 (India); Yperman, Jan, E-mail: jan.yperman@uhasselt.be [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium)

    2015-08-15

    Graphical abstract: Hybridization of AC onto TiO{sub 2} tends the catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic surfactants. The photodegradation of benzalkonium chloride (BKC) is investigated. - Highlights: • Activated carbon-TiO{sub 2} composite (ACT) surface tends negative upon UV irradiation. • ACT effectively photodegrade cationic surfactant benzalkonium chloride (BKC). • Optimum pH for UV-photodegradation of BKC is 8 to 9 and reaction time is 2 h. • Aromatic moiety of BKC is degraded faster than long alkyl chain. • UV–vis spectroscopy is sensitive to detect aqueous BKC from 1 μg/mL. - Abstract: TiO{sub 2} get positively charged upon UV-irradiation and repel the cationic pollutants away from the surface. Hybridization of AC onto TiO{sub 2} (ACT) tends catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic pollutants. The photodegradation of benzalkonium chloride (BKC), a quaternary ammonium surfactant and a pharmaceutical, is investigated with ACT. The surface charge of the catalyst in surfactant and non-surfactant aqueous dispersion under UV-irradiation is investigated and explained. The anomalous increase in COD values at the beginning of BKC-photodegradation is explained. The intermediate products formed are identified in both solution and solid phase. Trace amount of dodecane remained adsorbed on the catalyst surface after 1 h UV-irradiation, but complete mineralization of BKC is achieved with 2 h UV-irradiation. We propose that BKC photodegradation starts by central fission of benzyl C−N bond followed by dealkylation, and demethylation steps.

  2. A hybridization approach to efficient TiO2 photodegradation of aqueous benzalkonium chloride

    International Nuclear Information System (INIS)

    Graphical abstract: Hybridization of AC onto TiO2 tends the catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic surfactants. The photodegradation of benzalkonium chloride (BKC) is investigated. - Highlights: • Activated carbon-TiO2 composite (ACT) surface tends negative upon UV irradiation. • ACT effectively photodegrade cationic surfactant benzalkonium chloride (BKC). • Optimum pH for UV-photodegradation of BKC is 8 to 9 and reaction time is 2 h. • Aromatic moiety of BKC is degraded faster than long alkyl chain. • UV–vis spectroscopy is sensitive to detect aqueous BKC from 1 μg/mL. - Abstract: TiO2 get positively charged upon UV-irradiation and repel the cationic pollutants away from the surface. Hybridization of AC onto TiO2 (ACT) tends catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic pollutants. The photodegradation of benzalkonium chloride (BKC), a quaternary ammonium surfactant and a pharmaceutical, is investigated with ACT. The surface charge of the catalyst in surfactant and non-surfactant aqueous dispersion under UV-irradiation is investigated and explained. The anomalous increase in COD values at the beginning of BKC-photodegradation is explained. The intermediate products formed are identified in both solution and solid phase. Trace amount of dodecane remained adsorbed on the catalyst surface after 1 h UV-irradiation, but complete mineralization of BKC is achieved with 2 h UV-irradiation. We propose that BKC photodegradation starts by central fission of benzyl C−N bond followed by dealkylation, and demethylation steps

  3. Potassium-chloride cotransporter 3 interacts with Vav2 to synchronize the cell volume decrease response with cell protrusion dynamics.

    Directory of Open Access Journals (Sweden)

    Adèle Salin-Cantegrel

    Full Text Available Loss-of-function of the potassium-chloride cotransporter 3 (KCC3 causes hereditary motor and sensory neuropathy with agenesis of the corpus callosum (HMSN/ACC, a severe neurodegenerative disease associated with defective midline crossing of commissural axons in the brain. Conversely, KCC3 over-expression in breast, ovarian and cervical cancer is associated with enhanced tumor cell malignancy and invasiveness. We identified a highly conserved proline-rich sequence within the C-terminus of the cotransporter which when mutated leads to loss of the KCC3-dependent regulatory volume decrease (RVD response in Xenopus Laevis oocytes. Using SH3 domain arrays, we found that this poly-proline motif is a binding site for SH3-domain containing proteins in vitro. This approach identified the guanine nucleotide exchange factor (GEF Vav2 as a candidate partner for KCC3. KCC3/Vav2 physical interaction was confirmed using GST-pull down assays and immuno-based experiments. In cultured cervical cancer cells, KCC3 co-localized with the active form of Vav2 in swelling-induced actin-rich protruding sites and within lamellipodia of spreading and migrating cells. These data provide evidence of a molecular and functional link between the potassium-chloride co-transporters and the Rho GTPase-dependent actin remodeling machinery in RVD, cell spreading and cell protrusion dynamics, thus providing new insights into KCC3's involvement in cancer cell malignancy and in corpus callosum agenesis in HMSN/ACC.

  4. Leaching of lead from zinc leach residue in acidic calcium chloride aqueous solution

    Science.gov (United States)

    Wang, Le; Mu, Wen-ning; Shen, Hong-tao; Liu, Shao-ming; Zhai, Yu-chun

    2015-05-01

    A process with potentially reduced environmental impacts and occupational hazards of lead-bearing zinc plant residue was studied to achieve a higher recovery of lead via a cost-effective and environmentally friendly process. This paper describes an optimization study on the leaching of lead from zinc leach residue using acidic calcium chloride aqueous solution. Six main process conditions, i.e., the solution pH value, stirring rate, concentration of CaCl2 aqueous solution, liquid-to-solid (L/S) ratio, leaching temperature, and leaching time, were investigated. The microstructure and components of the residue and tailing were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). On the basis of experimental results, the optimum reaction conditions were determined to be a solution pH value of 1, a stirring rate of 500 r·min-1, a CaCl2 aqueous solution concentration of 400 g·L-1, a liquid-to-solid mass ratio of 7:1, a leaching temperature of 80°C, and a leaching time of 45 min. The leaching rate of lead under these conditions reached 93.79%, with an iron dissolution rate of 19.28%. Silica did not take part in the chemical reaction during the leaching process and was accumulated in the residue.

  5. Prediction of Swelling Behavior of N-Isopropylacrylamide Hydrogels in Aqueous Solution of Sodium Chloride

    Institute of Scientific and Technical Information of China (English)

    许小平; 李忠琴; 黄兴华; 王绪绪; 付贤; HiitherAndreas; MaurerGerd

    2004-01-01

    In this paper, a model is presented to correlate and predict the swelling behavior of hydrogels in aqueous solutions of electrolytes. The model is a combination of VERS-model, "phantom network" theory and "free-volume" contribution. The VERS-model is used to calculate Gibbs excess energy; "phantom network" theory to describe the elastic properties of polymer network, and "free-volume" contribution to account for additional difference in the size of the species. To test the model, a series of N-isopropylacrylamide based hydrogels are synthesized by free radical polymerization in oxygen-free, deionized water at 25~C under nitrogen atmosphere. Then, the degree of swelling of all investigated gels as well as the partition of the solute between the gel phase and the surrounding coexisting liquid phase are measured in aqueous solution of sodium chloride. The model test demonstrates that the swelling behavior correlated and predicted by the model agrees with the experimental data within the experimental uncertainty. The phase transition appeared in the experiment, and the influences of the total mass fraction of polymerizable materials ξgel as well as the mole fraction of the crosslinking agent YCR on the swelling behavior of IPAAm-gels can also be predicted correctly. All these show the potential of such model for correlation and prediction of the swelling behavior of hydrogels in aqueous solutions of electrolytes.

  6. Mechanism of HERG potassium channel inhibition by tetra-n-octylammonium bromide and benzethonium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Long, Yan; Lin, Zuoxian [Key Laboratory of Regenerative Biology, Guangzhou Institute of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou 510530 (China); Xia, Menghang; Zheng, Wei [National Center for Advancing Translational Sciences, National Institutes of Health, Bethesda, MD 20892 (United States); Li, Zhiyuan, E-mail: li_zhiyuan@gibh.ac.cn [Key Laboratory of Regenerative Biology, Guangzhou Institute of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou 510530 (China)

    2013-03-01

    Tetra-n-octylammonium bromide and benzethonium chloride are synthetic quaternary ammonium salts that are widely used in hospitals and industries for the disinfection and surface treatment and as the preservative agent. Recently, the activities of HERG channel inhibition by these compounds have been found to have potential risks to induce the long QT syndrome and cardiac arrhythmia, although the mechanism of action is still elusive. This study was conducted to investigate the mechanism of HERG channel inhibition by these compounds by using whole-cell patch clamp experiments in a CHO cell line stably expressing HERG channels. Tetra-n-octylammonium bromide and benzethonium chloride exhibited concentration-dependent inhibitions of HERG channel currents with IC{sub 50} values of 4 nM and 17 nM, respectively, which were also voltage-dependent and use-dependent. Both compounds shifted the channel activation I–V curves in a hyperpolarized direction for 10–15 mV and accelerated channel activation and inactivation processes by 2-fold. In addition, tetra-n-octylammonium bromide shifted the inactivation I–V curve in a hyperpolarized direction for 24.4 mV and slowed the rate of channel deactivation by 2-fold, whereas benzethonium chloride did not. The results indicate that tetra-n-octylammonium bromide and benzethonium chloride are open-channel blockers that inhibit HERG channels in the voltage-dependent, use-dependent and state-dependent manners. - Highlights: ► Tetra-n-octylammonium and benzethonium are potent HERG channel inhibitors. ► Channel activation and inactivation processes are accelerated by the two compounds. ► Both compounds are the open-channel blockers to HERG channels. ► HERG channel inhibition by both compounds is use-, voltage- and state dependent. ► The in vivo risk of QT prolongation needs to be studied for the two compounds.

  7. Nickel Hexacyanoferrate Nanoparticle Electrodes For Aqueous Sodium and Potassium Ion Batteries

    KAUST Repository

    Wessells, Colin D.

    2011-12-14

    The electrical power grid faces a growing need for large-scale energy storage over a wide range of time scales due to costly short-term transients, frequency regulation, and load balancing. The durability, high power, energy efficiency, and low cost needed for grid-scale storage pose substantial challenges for conventional battery technology.(1, 2)Here, we demonstrate insertion/extraction of sodium and potassium ions in a low-strain nickel hexacyanoferrate electrode material for at least five thousand deep cycles at high current densities in inexpensive aqueous electrolytes. Its open-framework structure allows retention of 66% of the initial capacity even at a very high (41.7C) rate. At low current densities, its round trip energy efficiency reaches 99%. This low-cost material is readily synthesized in bulk quantities. The long cycle life, high power, good energy efficiency, safety, and inexpensive production method make nickel hexacyanoferrate an attractive candidate for use in large-scale batteries to support the electrical grid. © 2011 American Chemical Society.

  8. Aromatic quinoxaline as corrosion inhibitor for bronze in aqueous chloride solution

    Indian Academy of Sciences (India)

    N Saoudi; A Bellaouchou; A Guenbour; A Ben Bachir; E M Essassi; M El Achouri

    2010-06-01

    A new corrosion inhibitor, viz. 3-ethyl-6-méthyl-quinoxalin-2-one, 1-benzyl-6-methyl-quinoxalin- 2-one, 2-benzyloxy-3,6-dimethyl-quinoxaline, 1-benzyl-3-methyl-quinoxalin-2-one, were synthesized in the laboratory. Their influence on the inhibition on corrosion of bronze in aqueous chloride solution (3% NaCl) was studied by electrochemical polarization methods and weight-loss measurements. The impact of temperature on the effectiveness of the substances mentioned above has been determined between 20 and 60°C. The results showed that the corrosion resistance was greatly enhanced in the presence of inhibitor and that the effectiveness depends on some physicochemical properties of the molecule, related to its functional groups. These compounds act through the formation of a protective film on the surface of the alloy.

  9. Modeling the interaction of mine brines with chloride minerals of potassium-magnesium deposits

    Science.gov (United States)

    Fetisov, V. V.

    2016-03-01

    The article is devoted to study of dynamics of saturation degree of suprasalt brines with respect to major chloride minerals of salt strata in the initial phase of an accident related to discontinuity of waterproof stratum in the mine of the Verkhnekamskoe salt deposit (Berezniki-3 mine, 1986). Physicochemical modeling has showed that the brines discharged into mine are in equilibrium with halite during all period of observation. At the same time, their degree of saturation with respect to sylvite and carnallite regularly decreases with the increase in inflow of the suprasalt Cl-Na brines. The initial stage of suprasalt brine penetration into mine is characterized by an increase in the saturation degree with respect to the considered chloride minerals, which is showed on the chart presented in the article. However, there are brines oversaturated with respect to halite, which occurs over a brief period. In contrast to the mine brines of different genesis being in equilibrium or close to equilibrium with sylvite, saturation index (SI) for this mineral decreases in the suprasalt brine. This allows one to recommend the use of this parameter in the study of the mine brines to timely detect suprasalt brines entering the mine.

  10. Growth of Bacillus cereus on solid media as affected by agar, sodium chloride, and potassium sorbate.

    Science.gov (United States)

    Stecchini, M L; Del Torre, M; Donda, S; Maltini, E

    2000-07-01

    The effect of two independent variables: microstructure, as modified by the agar content (1.0, 4.0, 7.0%), and water activity (a(w)), as modified by the NaCl content (0.5, 2.5, 4.5%), in the absence or in the presence of potassium sorbate (0.0; 2,000 ppm) on Bacillus cereus growth on solid media was studied. The time to visible growth (TVG) and the radial growth rate (RGR) of colonies were evaluated. TVG was not affected by microstructure and K-sorbate, although when a(w) was reduced, TVG tended to increase. RGR depended on linear effects of microstructure and a(w) variables and their interaction. When K-sorbate was added to cultural media, RGR was reduced significantly. However, in the presence of K-sorbate, RGR was found to change only when a(w) vas varied. PMID:10914662

  11. Interfacial behavior of perchlorate versus chloride ions in saturated aqueous salt solutions

    Energy Technology Data Exchange (ETDEWEB)

    Ghosal, S; Kuo, I W; Baer, M D; Bluhm, H

    2009-04-14

    In recent years combination of theoretical and experimental work have presented a novel view of the aqueous interface wherein hard and/or multiply charged ions are excluded from the interface, but large polarizable anions show interfacial enhancement relative to the bulk. The observed trend in the propensity of anions to adsorb at the air/water interface appears to be reverse of the Hofmeister series for anions. This study focuses on experimental and theoretical examination of the partitioning behavior of perchlorate (ClO{sub 4}{sup -}) and chloride (Cl{sup -}) ions at the air/water interface. We have used ambient pressure X-ray photoelectron spectroscopy technique to directly probe the interfacial concentrations of ClO{sub 4}{sup -} and Cl{sup -} ions in sodium perchlorate and sodium chloride solutions, respectively. Experimental observations are compared with first principles molecular dynamics simulations. Both experimental and simulation results show enhancement of ClO{sub 4}{sup -} ion at the interface, compared with the absence of such enhancement in the case of Cl{sup -} ion. These observations are in agreement with the expected trend in the interfacial propensity of anions based on the Hofmeister series.

  12. Controlling the structure and rheology of TEMPO-oxidized cellulose in zinc chloride aqueous suspensions for fabricating advanced nanopaper

    Science.gov (United States)

    Wang, Sha; Zhang, Xin; Hu, Liangbing; Briber, Robert; Wang, Howard; Zhong, Linxin

    Due to its abundance, low-cost, biocompatibility and renewability, cellulose has become an attractive candidate as a functional material for various advanced applications. A key to novel applications is the control of the structure and rheology of suspensions of fibrous cellulose. Among many different approaches of preparing cellulose suspensions, zinc chloride addition to aqueous suspensions is regarded an effective practice. In this study, effects of ZnCl2 concentration on TEMPO-oxidized cellulose (TOC) nanofiber suspensions have been investigated. Highly-transparent cellulose nanofiber suspension can be rapidly obtained by dissolving TOC in 65 wt.% zinc chloride aqueous solutions at room temperature, whereas a transparent zinc ion cross-linked TOC gel could be obtained with zinc chloride concentration as low as 10 wt. %. The structural and rheological characteristics of TOC/ZnCl2 suspensions have been measured to correlate to the performance of thetransparent and flexible nanocellulose paper subsequently produced via vacuum filtration or wet-casting processes.

  13. Prenatal hypoxia-ischemia induces abnormalities in CA3 microstructure, potassium chloride cotransporter 2 expression and inhibitory tone

    Directory of Open Access Journals (Sweden)

    Lauren L Jantzie

    2015-09-01

    Full Text Available Infants who suffer perinatal brain injury, including those with encephalopathy of prematurity, are prone to chronic neurological deficits including epilepsy, cognitive impairment, and behavioral problems such as anxiety, inattention and poor social interaction. These deficits, especially in combination, pose the greatest hindrance to these children becoming independent adults. Cerebral function depends on adequate development of essential inhibitory neural circuits and the appropriate amount of excitation and inhibition at specific stages of maturation. Early neuronal synaptic responses to γ-amino butyric acid (GABA are initially excitatory. During the early postnatal period, GABAAR responses switch to inhibitory with the upregulation of potassium-chloride co-transporter KCC2. With extrusion of chloride by KCC2, the Cl- reversal potential shifts and GABA and glycine responses become inhibitory. We hypothesized that prenatal hypoxic-ischemic brain injury chronically impairs the developmental upregulation of KCC2 that is essential for cerebral circuit formation. Following late gestation hypoxia-ischemia, diffusion tensor imaging in juvenile rats shows poor microstructural integrity in the hippocampal CA3 subfield, with reduced fractional anisotropy and elevated radial diffusivity. The loss of microstructure correlates with early reduced KCC2 expression on NeuN-positive pyramidal neurons, and decreased monomeric and oligomeric KCC2 protein expression in the CA3 subfield. Together with decreased IPSCs during a critical window of development, we document for the first time that prenatal transient systemic hypoxia-ischemia in rats impairs hippocampal CA3 inhibitory tone. Failure of timely development of inhibitory tone likely contributes to a lower seizure threshold and impaired cognitive function in children who suffer perinatal brain injury.

  14. Effects of de-icing chemicals sodium chloride and potassium formate on cadmium solubility in a coarse mineral soil

    International Nuclear Information System (INIS)

    Excessive use of sodium chloride (NaCl) as de-icing chemical causes environmental problems, such as elevated chloride concentrations in groundwater. On vulnerable sites, this can be avoided by using alternative organic de-icing chemicals, such as potassium formate (KHCOO). The environmental impacts of KCHOO are, however, not well known. This study reports the potential effects of NaCl and KCHOO on mechanisms controlling the mobility of cadmium (Cd) in roadside soils as a result of vehicular traffic. Changes in the solubility of Cd in a coarse mineral soil treated with these two de-icing chemicals were studied in a 50-day incubation experiment under four different moisture and temperature combinations and an initial soil Cd concentration of 3 mg kg-1. After incubation, the distribution of soil Cd into different fractions was analyzed using a sequential extraction method. Soil pH and soil redox potential were recorded and the occurrence of Cd-Cl complexes in the soil was estimated using published stability constants. During incubation, KCHOO lowered the soil redox potential, but this was not accompanied by a decrease in the sorption capacity of oxides and the release of oxide-bound Cd into soil solution. On the other hand, elevated pH (from 4.3 to 6.7-8.5) in the formate treatments increased the sorption of Cd onto the oxide surfaces (up to 80% of total sorbed Cd). In the NaCl treatments, cation competition and formation of Cd-Cl complexes increased the water-soluble Cd fraction. Consequently, the amount of bioavailable Cd was 3.5 times smaller in the KCHOO than in the NaCl treatments

  15. the Triple Effect Evaporation Process in Potassium Chloride Production%氯化钾三效蒸发工艺

    Institute of Scientific and Technical Information of China (English)

    吴宗生; 王景波

    2012-01-01

    Triple effect evaporation process is used in potassium chloride production. The heat energy is fully utilized and cost of production is decreased with the process. The conventional lag behind process is changed and a new idea is opened in potassiuim chlorede production. The automatic control system is used in order to decrease the lahors load and the operation precision also improved. With the successful operation of triple evaporation system, the production cost is reduced and qualified raw material is supplied to downstream production.%氯化钾采用三效蒸发,充分利用了热能,改变了沿用多年的落后工艺、降低了生产成本,为氯化钾生产开辟了新思路;自动控制系统的引用大大降低了工人的劳动负荷,且提高了操作的精度,使氯化钾生产首次实现自动化;三效蒸发系统的成功运行不仅降低了生产成本还为下游产品提供了优质充足的原料.

  16. Photochemical reduction and reoxidation of aqueous mercuric chloride in the presence of ferrioxalate and air

    Energy Technology Data Exchange (ETDEWEB)

    Ababneh, Fuad A. [Department of Chemistry, P.O. Box 450 Station A, University of Ottawa, Ottawa, ON K1N 6N5 (Canada); Scott, Susannah L. [Department of Chemical Engineering, University of California, Santa Barbara, CA 93106 (United States); Al-Reasi, Hassan A. [Department of Biology, P.O. Box 450 Station A, University of Ottawa, Ottawa, ON K1N 6N5 (Canada); Lean, David R.S. [Department of Biology, P.O. Box 450 Station A, University of Ottawa, Ottawa, ON K1N 6N5 (Canada)]. E-mail: dlean@science.uottawa.ca

    2006-08-31

    In this study, ferric oxalate is used to represent the photosensitive Fe(III) complexes as well as the diacid compounds which are at significant concentrations in cloud and rain droplets. Because of the common carboxylate functional group; ferric oxalate is also used as a model to represent humic substances found in natural water. UVA irradiation of aqueous acidic mercuric chloride (pH 1-4) in the presence of an excess of ferrioxalate results in partial reduction of the mercuric ion to elemental mercury. The pseudo-first-order rate constant 'k {sub obs}' for the photoreduction reaction is pH-dependent as is the yield of residual Hg(II). When exposed to visible irradiation the rate is about 10 times slower and no reaction was observed in the dark. The inferred mechanism of photoreduction involves the reaction of Hg(II) with a secondary photoproduct, the strongly reducing radical anion CO{sub 2} {sup -{center_dot}}. In the presence of dissolved oxygen, competition for CO{sub 2} {sup -{center_dot}} between Hg(II) and O{sub 2} reduces the rate and efficiency of mercuric ion reduction. The O{sub 2} {sup -{center_dot}}/HO{sub 2} products do not reduce Hg(II). On the contrary, their disproportionation leads to the formation of H{sub 2}O{sub 2} which causes a re-oxidation of Hg(0) at pH values of {<=} 4. Chloride ion decreases the rate of the reduction of Hg(II)

  17. Application of potassium chloride to a Chernobyl-contaminated lake. Modelling the dynamics of radiocaesium in an aquatic ecosystem and decontamination of fish

    International Nuclear Information System (INIS)

    This study tests a whole-lake experiment to reduce the bioaccumulation of radiocaesium (137Cs) in fish in lakes contaminated by the Chernobyl accident. In many lakes in the Chernobyl contaminated areas, radiocaesium activity concentrations in fish are still significantly higher (up to 100 times in some species) than acceptable limits for human consumption. Estimates of the long-term rate of decline of 137Cs in fish in these regions, in the absence of countermeasures, show that radioactivity in fish in some lakes may remain above acceptable consumption limits for a further 50-100 years from the present date. In February 1998 we applied 15 t of potassium chloride to Lake Svyatoe, Kostiukovichy. The addition of potassium chloride fertilizer to the lake resulted in a decrease in activity concentration of 137Cs to approximately 40% of pre-countermeasure values in a number of different fish species. In contrast to Lake Svyatoe, 137Cs activity concentrations in fish from four control lakes showed no systematic decrease over the study period. Simplified models for transfers of 137Cs in lakes successfully 'blind' predicted the changes in 137Cs in water and fish resulting from this major alteration of the potassium concentration of the lake. The experiment represents the first test of a predictive model for the dynamics of radiocaesium in response to a major perturbation in potassium (its major competitor ion) in a whole lake ecosystem

  18. Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Gary A [ORNL; Heller, William T [ORNL

    2009-01-01

    As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

  19. Sodium carboxymethylcellulose-induced aggregation of 1-decyl-3-methylimidazolium chloride in aqueous solutions.

    Science.gov (United States)

    Ray, Dhiman; Das, Sourav; De, Ranjit; Das, Bijan

    2015-07-10

    Aggregation behavior of a surface active ionic liquid 1-decyl-3-methylimidazolium chloride (C10MeImCl) was studied in aqueous solutions in absence and in presence of sodium carboxymethylcellulose (NaCMC) by electrical conductivity, surface tension, vapor pressure, and fluorescence measurements. Ion-association behavior of C10MeImCl (aq) in the premicellar regime has also been investigated. Two characteristic concentrations, namely the critical aggregation concentration and polymer saturation concentration, before free C10MeImCl micelles appear in C10MeImCl-NaCMC solutions were identified. Effects of temperature, NaCMC concentration, and the bulk solution structural property on the self-aggregation of C10MeImCl have been discussed to elucidate C10MeImCl-NaCMC interactions. Thermodynamics of the micellization processes provided important insight regarding the (a) release of water molecules from the hydration layer around the hydrophilic domain, and from the water cage around the hydrophobic moiety of the SAIL, and (b) transfer of the hydrocarbon chains into the micelle and restoration of the H-bonding structure of the water around the micelle. PMID:25857982

  20. Vapor Pressure of Saturated Aqueous Solutions of Potassium Sulfate from 310 K to 345 K

    Directory of Open Access Journals (Sweden)

    Matias O. Maggiolo

    2011-01-01

    Full Text Available The experimental evaluation of the vapor pressure of saturated aqueous solutions of potassium sulfate was carried out in the range of temperatures 310 K≤T≤345 K. The experimental data were used to determine the corresponding values of the water activity in such solutions. The analytical expressions as a function of temperature of both, vapor pressure and water activity, were obtained from the correlation of the experimental results. The vapor pressure expression was also extrapolated to a different temperature range in order to make a comparison with the results obtained by other authors.

  1. Protective effect of butylated hydroxytoluene (BHT against the clastogenic acitivity of cadmium chloride and potassium dichromate in hamster ovary cells

    Directory of Open Access Journals (Sweden)

    Grillo Claudia A.

    1999-01-01

    Full Text Available The effect of butylated hydroxytoluene (BHT, a widely used food additive, on chromosomal alterations induced by cadmium chloride (CC and potassium dichromate (PD in Chinese hamster ovary (CHO cells was studied both at metaphase and anaphase-telophase. CHO cells were cultured for 15-16 h in the presence of PD (6.0, 9.0 or 12.0 mM, BHT (1.0 mg/ml, or PD plus BHT as well as CC (0.5, 1.0 and 2.0 mM, BHT or CC plus BHT for the analysis of chromosomal aberrations. To perform the anaphase-telophase test, cells were cultured in cover glasses and treated 8 h before fixation with the same chemicals. An extra dose of CC (4 mM was used in this test. Both metal salts significantly increased chromosomal aberration frequencies in relation to untreated controls, and to DMSO- and BHT-treated cells. Post-treatment with BHT decreased the yield of chromosomal damage in relation to treatments performed with CC and PD. However, chromosomal aberration frequencies were significantly higher than those of the controls. In the anaphase-telophase test, CC significantly increased the yield of lagging chromosomes with the four doses employed and the frequency of lagging fragments with the highest dose. In combined treatments of CC and BHT, frequencies of the two types of alterations decreased significantly in relation to the cells treated with CC alone. No significant variation was found in the frequencies of chromatin bridges. Significant increases of numbers of chromatin bridges, lagging chromosomes and lagging fragments were found in cells treated with PD. The protective effect of BHT in combined treatments was evidenced by the significant decrease of chromatid bridges and lagging chromosomes in relation to PD-treated cells. Whereas BHT is able to induce chromosomal damage, it can also protect against oxidative damage induced by other genotoxicants.

  2. Crevice corrosion behaviour of titanium grades-2 and -12 in hot aqueous chloride solution - the effect of chloride concentration

    International Nuclear Information System (INIS)

    The crevice corrosion of Grades-2 (Ti-2) and -12 titanium (Ti-12) has been studied at a temperature of 150oC in solutions ranging in sodium chloride concentration from 0.27 mol·L-1 to 5.0 mol·L-1. A technique in which an artificially creviced electrode was coupled through a zero resistance ammeter to a large counter electrode was used to follow the potential of the crevice specimen and the coupled current due to oxygen reduction on the coupled electrode. The total amount of crevice corrosion which occurred on the specimen was estimated from weight change measurements. The depth of penetration due to crevice corrosion was measured using a combination of metallographic and image analysis techniques. Crevice corrosion of Ti-2 continued, without repassivation, until all the oxygen within the sealed pressure vessel system was exhausted. The weight change was proportional to the maximum depth of penetration and corrosion was observed to be quite generally distributed throughout the creviced area. Corrosion profiles (i.e., percentage of the creviced area corroded versus the depth of penetration) show a localized corrosion process preceding a more general corrosion front. The extent and rate of crevice propagation and the depth of maximum penetration, all decrease with increasing chloride concentration, but their dependence on this concentration is not major. By comparison, both the extent and rate of crevice corrosion of Ti-12 are dependent on chloride concentration increasing substantially for concentrations >0.5 mol·L-1 but decreasing again for concentrations >3.0 mol·L-1. However, at all chloride concentrations, the crevice repassivated before all the available oxygen was depleted; i.e., the extent of crevice corrosion is severely limited. Measurements of the depths of corrosion penetration show that, for Ti-12, penetration within the crevice occurs much more locally than for Ti-2. In fact, if a general corrosion front can be discerned at all, it is ∼10

  3. Uranium, thorium and rare earth extraction and separation process by processing their chloride aqueous solutions

    International Nuclear Information System (INIS)

    The different steps of the process are the following: uranium and iron extraction by a neutral organic phosphorus compound and thorium and rare earth recovery in an aqueous solution, iron recovery in acid aqueous phase, concentration of the thorium and rare earth aqueous solution followed by thorium extraction with a organic phosphorus compound and rare earth recovery in the aqueous phase, thorium recovery in acid aqueous phase

  4. Removal of lead and nickel from aqueous solutions by SiO{sub 2} doped potassium titanate

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Gonzalez, Miguel A., E-mail: mgzlz@hotmail.com [Centro de Investigacion en Materiales Avanzados, Miguel de Cervantes 120, C.P 31109 Chihuahua (Mexico); Centro de Investigacion y de Estudios Avanzados, Unidad Saltillo, Carr. Saltillo-Mty, Km. 13, AP 663, CP 25 000, Saltillo, Coahuila (Mexico); Gorokhovsky, Alexander V. [Centro de Investigacion y de Estudios Avanzados, Unidad Saltillo, Carr. Saltillo-Mty, Km. 13, AP 663, CP 25 000, Saltillo, Coahuila (Mexico); Aguilar-Elguezabal, Alfredo [Centro de Investigacion en Materiales Avanzados, Miguel de Cervantes 120, C.P 31109 Chihuahua (Mexico)

    2010-10-25

    This paper is related to the elimination of Pb{sup 2+} and Ni{sup 2+} ions from aqueous solutions by adsorption in potassium tetratitanate doped with silica. The adsorbent was prepared in the form of pellets from potassium polytitanate (45 W%), powdered Pyrex glass (5 W%) and potato starch pastes (50 W%), which were extruded and heat treated at 1100 deg. C. The physicochemical characteristics of the granulated adsorbent allow the retention of lead from the aqueous solutions when passed through of an adsorption column, and the lead concentration in wastewater can fulfill the maximum permissible limits of national regulations. The experimental techniques used were: ICP, SEM, BET, Mercury Porosimetry and XRD. The nickel ions removal was carried out in sets of systems batches. The effects of the time on flow of the adsorbent and the pH of the solution on the effectiveness of the adsorption of Pb were also investigated. The maximum amounts removed of lead and nickel were 28 and 19.9 mg/g in batch sets. The mechanism of lead and nickel retention on the developed adsorbent is considered as a combination of adsorption, ion-exchange and precipitation processes. At basic pH values and with the adsorption results obtained in this paper proposes a kind of complex surface based on the formation of metal hydroxide on the surface of the original adsorbent. It is also shown that the lead-saturated adsorbent could be stabilized by means of a heat treatment.

  5. Study of an aqueous lithium chloride desiccant system Part II: Desiccant regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Fumo, Nelson [Universidad Nacional Experimental del Tachira, San Cristobal (Venezuela); Goswami, Yogi [University of Florida, Gainesville (United States)

    2000-07-01

    Desiccant systems have been proposed as alternative to handle the latent load in vapor compression air conditioning for energy saving. The air dehumidification occurs because of the difference in vapor pressure which let the moisture diffuse from the air to the liquid desiccant. The diffused moisture cause a dilution of the desiccant which must be regenerated to return it to the original conditions. This paper presents the results from a study of the performance of a packed tower regenerator for an aqueous lithium chloride desiccant dehumidification system. The rate of water evaporation, as well as the effectiveness of the regeneration process were assessed under the effects of variables such as air and desiccant flow rates, air temperature and humidity, and desiccant temperature and concentration. A variation of the oeberg and Goswami mathematical model was used to predict the experimental findings given satisfactory results. [Spanish] Se han propuesto sistemas desecantes para hacerse cargo de la carga latente en acondicionamiento de aire por compresion de vapor para el ahorro de energia. La deshumidificacion del aire ocurre en razon de la diferencia de presion de vapor que deja la humedad difusa del aire en el desecante liquido. La humedad difusa del aire origina una dilucion del desecante el cual debe de ser regenerado para regresarlo a sus condiciones originales. Este documento presenta los resultados de un estudio sobre el comportamiento de un regenerador de torre empacada para un sistema de deshumidificacion de solucion desecante de cloruro de litio. El regimen de evaporacion de agua, asi como tambien la efectividad del proceso de regeneracion que se evaluo bajo los efectos de variables tales como los regimenes de flujo de aire y de desecante, temperatura del aire y humedad, y temperatura y concentracion del desecante. Una variacion del modelo matematico de Oberg y Goswami se uso para predecir los resultados experimentales que dieron resultados satisfactorios.

  6. Study of an aqueous lithium chloride desiccant system Part I: Air dehumidification

    Energy Technology Data Exchange (ETDEWEB)

    Fumo, Nelson [Universidad Nacional Experimental del Tachira, San Cristobal (Venezuela); Goswami, Yogi [University of Florida, Gainesville (United States)

    2000-07-01

    Desiccant systems have been proposed as energy saving alternative to vapor compression air conditioning for handling the latent load. Use of liquid desiccants offers several design and performance advantages over solid desiccants, especially when solar energy is used for regeneration. For liquid-gas contact, packed towers with low pressure drop have offered good heat and mass transfer characteristics for compact designs. This paper presents the results from a study of the performance of a packed tower absorber for an aqueous lithium chloride desiccant dehumidification system. The rate of dehumidification, as well as the effectiveness of the dehumidification process were assessed under the effects of variables such as air and desiccant flow rates, air temperature and humidity, and desiccant temperature and concentration. A variation of the oeberg and Goswami mathematical model was used to predict the experimental findings given satisfactory results. [Spanish] Se han propuesto sistemas de desecacion como una alternativa de ahorro de energia para el acondicionamiento de aire mediante la compresion de vapor para manejar la carga latente. El uso de desecantes liquidos ofrece varias ventajas de diseno y de rendimiento sobre los desecantes solidos, especialmente cuando la energia solar se usa para la regeneracion. Para el contacto liquido-gas han dado buenas caracteristicas de transferencia de masa para disenos compactos las torres empacadas con baja caida de presion. Este documento presenta los resultados de un estudio del comportamiento de un absorbedor de torre empacada para una solucion acuosa de desecante de cloruro de litio como sistema de deshumidificacion. El regimen de deshumidificacion asi como tambien la eficiencia del proceso de deshumidificacion se evaluo bajo los efectos de variables tales como regimenes de flujo de aire y de desecante, temperatura del aire y humedad, y concentracion y temperatura del desecante. Se uso una variante de modelo matematico de

  7. Optimization for Preparation of Potassium Sulfate by Sodium Sulfate and Potassium Chloride%氯化钾与硫酸钠制硫酸钾工艺的优化

    Institute of Scientific and Technical Information of China (English)

    屠兰英; 赵启文

    2000-01-01

    根据K+,Na+∥Cl-,SO42-—H2O体系相图,提出了氯化钾与芒硝制备硫酸 钾工艺中新的工业化生产循环和解决钾芒硝富集问题的具体方案,取得良好效果。%Accordinh to the study and analysis on phase diagram of the Na+,K+∥Cl-, SO42--H2O system, new cycle for preparation of potassium sulfate by sodium sulfate and potassium chloride and treatment of surplus sodium sulfate.3p otassium sulfate (Na2SO4.3K2SO4) are presented, achieve good results.

  8. Scientific Opinion on the safety evaluation of the active substances iron, sodium chloride, water, silica gel, activated carbon, monosodium glutamate, potassium acid tartrate, powdered cellulose, malic acid, chabazite, hydroxypropyl cellulose, potassium carbonate, sodium thiosulfate, propylene glycol, glycerin, polyethyleneglycol sorbitan monooleate, sodium propionate and clinoptilolite for use in food contact materials

    OpenAIRE

    EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF)

    2013-01-01

    This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety evaluation of iron based oxygen absorber systems comprising iron, sodium chloride, water, silica gel, activated carbon, monosodium glutamate, potassium acid tartrate, powdered cellulose, malic acid, chabazite, hydroxypropyl cellulose, potassium carbonate, sodium thiosulfate, propylene glycol, glycerin, polyethyleneglycol sorbitan monooleate, sodium propionate and...

  9. Influence of potassium permanganate, cobalt chloride, and dietary supplement of vitamin B complex on the histopathological changes in gill epithelium of common carp exposed to cadmium

    Energy Technology Data Exchange (ETDEWEB)

    Das, B.K.; Kaviraj, A. [Univ. of Kalyani, West Bengal (India)

    1994-10-01

    Fry of common carp (Cyprinus carpio) were chronically exposed to 2.5 mg Cd/L alone and in combination with 1.0 mg KMnO{sub 4}/L or 2.0 mg CoCl{sub 2}/L or a dietary supplement of vitamin B complex at the rate of 26.5 mg/100 g food. Cadmium induced edema of primary and secondary gill lamellae, nuclear swelling, and necrosis and hypertrophy of epithelial cells of the secondary gill lamellae. Similar or more severe lamellar damages were observed with exposure to cadmium together with potassium permanganate and to cadmium together with cobalt chloride. Potassium permanganate alone was also found to produce severe edema of the gill lamellae. A dietary supplement of vitamin B complex reduced the cadmium-induced gill damages and resulted in a normal gill in exposed fish. 24 refs., 4 figs., 1 tab.

  10. The effect of sodium reduction with and without potassium chloride on the survival of Listeria monocytogenes in Cheddar cheese.

    Science.gov (United States)

    Hystead, E; Diez-Gonzalez, F; Schoenfuss, T C

    2013-10-01

    Sodium chloride (NaCl) in cheese contributes to flavor and texture directly and by its effect on microbial and enzymatic activity. The salt-to-moisture ratio (S/M) is used to gauge if conditions for producing good-quality cheese have been met. Reductions in salt that deviate from the ideal S/M range could result in changing culture acidification profiles during cheese making. Lactococcus lactis ssp. lactis or Lc. lactis ssp. cremoris are both used as cultures in Cheddar cheese manufacture, but Lc. lactis ssp. lactis has a higher salt and pH tolerance than Lc. lactis ssp. cremoris. Both salt and pH are used to control growth and survival of Listeria monocytogenes and salts such as KCl are commonly used to replace the effects of NaCl in food when NaCl is reduced. The objectives of this project were to determine the effects of sodium reduction, KCl use, and the subspecies of Lc. lactis used on L. monocytogenes survival in stirred-curd Cheddar cheese. Cheese was manufactured with either Lc. lactis ssp. lactis or Lc. lactis ssp. cremoris. At the salting step, curd was divided and salted with a concentration targeted to produce a final cheese with 600 mg of sodium/100 g (control), 25% reduced sodium (450 mg of sodium/100 g; both with and without KCl), and low sodium (53% sodium reduction or 280 mg of sodium/100 g; both with and without KCl). Potassium chloride was added on a molar equivalent to the NaCl it replaced to maintain an equivalent S/M. Cheese was inoculated with a 5-strain cocktail of L. monocytogenes at different times during aging to simulate postprocessing contamination, and counts were monitored over 27 or 50 d, depending on incubation temperature (12 or 5 °C, respectively). In cheese inoculated with 4 log₁₀ cfu of L. monocytogenes/g 2 wk after manufacture, viable counts declined by more than 3 log₁₀ cfu/g in all treatments over 60 d. When inoculated with 5 log₁₀ cfu/g at 3mo of cheese age, L. monocytogenes counts in Cheddar cheese were also

  11. Solubility in aqueous system of potassium sulfate, cadmium sulfate at 50 deg C

    International Nuclear Information System (INIS)

    Solubility in system potassium sulfate-cadmium sulfate-water at 50 deg C is studied using isothermal method. Crystallization limits of K2SO4, CdSO4x8/3H2O double salt 2K2SO4x2CdSO4x3H2O at 50 deg C are determined

  12. Optimum potassium chloride concentration to reduce hydration capacity of clay formations; Concentracao otima de cloreto de potassio para reduzir a capacidade de hidratacao das formacoes argilosas

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Jose Carlos Vieira [PETROBRAS, Salvador, BA (Brazil). Centro de Recursos Humanos Norte-Nordeste. Setor de Programas de Perfuracao; Oliveira, Manoel Martins de [PETROBRAS, BA (Brazil). Distrito de Perfuracao. Div. de Tecnicas de Perfuracao

    1988-12-31

    An experimental method for ascertaining the optimal concentration of potassium chloride for reducing the hydration and dispersion capacity of clayey formations sensitive to water-based fluids is described. Under this method, filtering time for disperse systems prepared from clayey formation samples is measured. A discussion is offered on theoretical aspects of hydration, expansion, and dispersion of clayey rocks in response to the variations in stress equilibrium states produced by these phenomena when a hole (well) is opened in the rock. The state of the art of this technological branch is also described. (author) 10 refs., 5 figs., 4 tabs.

  13. Excess heat production by the electrolysis of an aqueous potassium carbonate electrolyte and the implications for cold fusion

    International Nuclear Information System (INIS)

    This paper reports that according to a novel atomic model, the predominant source of heat of the phenomenon called cold fusion is the electrocatalytically induced reaction whereby hydrogen atoms undergo transitions to quantized energy levels of lower energy than the conventional ground state. These lower energy states correspond to fractional quantum numbers. The hydrogen electronic transition requires the presence of an energy hole of ∼27.21 eV provided by electrocatalytic reactants (such as Pd2+/Li+, Ti2+, or K+/K+ and results in shrunken atoms analogous to muonic atoms. In the case of deuterium, fusion reactions of shrunken atoms predominantly yielding tritium are possible. Calorimetry of pulsed current and continuous electrolysis of aqueous potassium carbonate (K+/K+ electrocatalytic couple) at a nickel cathode is performed in single-cell dewar calorimetry cells. Excess power out exceeded input power by a factor of >37

  14. Shock Hugoniot and equations of states of water, castor oil, and aqueous solutions of sodium chloride, sucrose and gelatin

    Science.gov (United States)

    Gojani, A. B.; Ohtani, K.; Takayama, K.; Hosseini, S. H. R.

    2016-01-01

    This paper reports a result of experiments for the determination of reliable shock Hugoniot curves of liquids, in particular, at relatively low pressure region, which are needed to perform precise numerical simulations of shock wave/tissue interaction prior to the development of shock wave related therapeutic devices. Underwater shock waves were generated by explosions of laser ignited 10 mg silver azide pellets, which were temporally and spatially well controlled. Measuring temporal variation of shock velocities and over-pressures in caster oil, aqueous solutions of sodium chloride, sucrose and gelatin with various concentrations, we succeeded to determine shock Hugoniot curves of these liquids and hence parameters describing Tait type equations of state.

  15. A Fiber-Optic Sensor Using an Aqueous Solution of Sodium Chloride to Measure Temperature and Water Level Simultaneously

    OpenAIRE

    Wook Jae Yoo; Hyeok In Sim; Sang Hun Shin; Kyoung Won Jang; Seunghyun Cho; Joo Hyun Moon; Bongsoo Lee

    2014-01-01

    A fiber-optic sensor system using a multiplexed array of sensing probes based on an aqueous solution of sodium chloride (NaCl solution) and an optical time-domain reflectometer (OTDR) for simultaneous measurement of temperature and water level is proposed. By changing the temperature, the refractive index of the NaCl solution is varied and Fresnel reflection arising at the interface between the distal end of optical fiber and the NaCl solution is then also changed. We measured the modified ...

  16. Effect of potassium monopersulfate (oxone) and operating parameters on sonochemical degradation of cationic dye in an aqueous solution.

    Science.gov (United States)

    Soumia, Fassi; Petrier, Christian

    2016-09-01

    In this study, removal of Cresol Red (CR), a cationic triphenylmethane dye, by 300kHz ultrasound was investigated. The effect of additive such as potassium monopersulfate (oxone) was studied. Additionally, sonolytic degradation of CR was investigated at varying power and initial pH. RC can be readily eliminated by the ultrasound process. The obtained results showed that. Sonochemical degradation of CR was strongly affected by ultrasonic power and pH. The degradation rate of the dye increased substantially with increasing ultrasonic power in the range of 20-80W. This improvement could be explained by the increase in the number of active cavitation bubbles. The significant degradation was achieved in acidic conditions (pH=2) where the color removal was 99% higher than those observed in higher pH aqueous solutions. The ultrasonic degradation of dye was enhanced by potassium monopersulfate (oxone) addition. It was found that the degradation of the dye was accelerated with increased concentrations of oxone for a reaction time of 75min. PMID:27150780

  17. Effect of electrolytes on surface tension and surface adsorption of 1-hexyl-3-methylimidazolium chloride ionic liquid in aqueous solution

    International Nuclear Information System (INIS)

    Surface and bulk properties of 1-hexyl-3-methylimidazolium chloride [C6mim][Cl] as an ionic liquid (IL) have been investigated by surface tension and electrical conductivity techniques at various temperatures. Results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solution. Critical aggregation concentration (cac) values obtained by conductivity and surface tension measurements are in good agreement with values found in the literature. A series of important and useful adsorption parameters including cac, surface excess concentration (Γ), and minimum surface area per molecule (Amin) at the air + water interface were estimated from surface tension in the presence and absence of different electrolytes. Obtained data show that the surface tension as well as the cac of [C6mim][Cl] is reduced by electrolytes. Also, values of surface excess concentration (Γ) show that the IL ions in the presence of electrolyte have much larger affinity to adsorption at the surface and this affinity increased in aqueous electrolyte solution in the order of I- > Br- > Cl- for counter ion of salts that was explained in terms of a larger repulsion of chloride anions from interface to the bromide and iodide anion as well as difference in their excess polarizability.

  18. Conversion of phosphogypsum to potassium sulfate and calcium carbonate in aqueous solution

    Directory of Open Access Journals (Sweden)

    Ennaciri Y.

    2013-09-01

    Full Text Available The dissociation of the phosphogysum by the liquid route which is the object of our work, is most appropriate and little expensive. Indeed, it leads to materials of direct application. The present work has for objective to study the decomposition of the phosphogypsum by the soft chemistry into valuable products such as K2SO4 and CaCO3. K2SO4 is a fertilizer which is highly recommended in the field of the agriculture, while CaCO3 can be used in the fields of the industry (cement and the environment. According to the obtained results, we notice that the decomposition of the phosphogypsum in aqueous solution is very workable, reproducible, inexpensive and it is an ecologically interesting reaction. This reaction is made at room temperature and in aqueous environment, by giving two valuable products K2SO4 and CaCO3. The reaction is total after one hour and a half.

  19. Accounting for Electronic Polarization Effects in Aqueous Sodium Chloride via Molecular Dynamics Aided by Neutron Scattering

    Czech Academy of Sciences Publication Activity Database

    Kohagen, Miriam; Mason, Philip E.; Jungwirth, Pavel

    2016-01-01

    Roč. 120, č. 8 (2016), s. 1454-1460. ISSN 1520-6106 R&D Projects: GA ČR GBP208/12/G016 Institutional support: RVO:61388963 Keywords : molecular dynamics * neutron scattering * agueous sodium chloride Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.302, year: 2014

  20. Slow strain rate behavior of TiCode 12 (ASTM Gr.12) in aqueous chloride solutions

    International Nuclear Information System (INIS)

    Slow strain rate testing has shown that the macroscopic tensile properties of mill-annealed TiCode 12 are not affected by exposure to either a synthetic seawater or high chloride brine environment. However, microscopic examination indicates that the fracture mode may be sensitive to environment. This sensitivity appears to be related to hydrogen ingress during prolonged exposure

  1. Carbon dioxide solubility in aqueous potassium salt solutions of L-proline and DL-α-aminobutyric acid at high pressures

    International Nuclear Information System (INIS)

    Highlights: • CO2 solubility in aqueous potassium salt solutions of L-proline and DL-α-aminobutyric acid were studied. • The CO2 partial pressures studied was up to 1000 kPa. • The temperatures studied were (313.2, 333.2, 353.2) K. • The measured data were represented satisfactorily by using the applied correlations. • The CO2 absorption capacity of the studied systems was high and comparable with monoethanolamine. - Abstract: In the present work, the solubility of CO2 in aqueous solutions of potassium prolinate (KPr) and potassium α-aminobutyrate (KAABA) was measured at temperatures (313.2, 333.2, and 353.2) K and CO2 partial pressures up to 1000 kPa for amino acid salt concentrations: KPr, w = (7.5, 14.5, and 27.4 wt%) and KAABA, w = (6.9, 13.4, and 25.6 wt%). It was found that the CO2 absorption capacities of the studied amino acid salt systems were considerably high and comparable with that of industrially important alkanolamines including monoethanolamine. The CO2 loadings in aqueous potassium α-aminobutyrate at high pressures were also found to be generally higher than the loadings in aqueous potassium prolinate. A modified Kent–Eisenberg model was applied to correlate the CO2 solubility in the amino acid salt solution as function of CO2 partial pressure, temperature, and concentration. The model gave good representation of the (vapour + liquid) equilibrium data obtained for the amino acid salt systems studied, and provided accurate predictions of the solubility

  2. Effect of potassium permanganate, cobalt chloride and vitamin B complex on the haematological parameters of cadmium treated common carp, Cyprinus carpio.

    Science.gov (United States)

    Kaviraj, A; Das, B K

    1995-01-01

    Effect of potassium permanganate, cobalt chloride and vitamin B complex on the haematological parameters of common carp Cyprinus carpio were markedly influenced by a treatment of 2.5 mg/l Cd in the laboratory for 96 hours. Hb% and ESR values were increased but the RBC and PCV values were reduced. Treatment of KMnO4 (1 mg/l) or CoCl2 (2 mg/l) induced a further reduction of RBC of the Cd treated fish. But parameters like PCV, MCV and MCH of Cd treated fish were not affected by the treatment of KMnO4 and CoCl2. Intramuscular injection of vitamin B complex did not produce any impact on ESR and MCV values of the Cd treated exposed fish but most of the other parameters of such fish were found comparable to control indicating that vitamin B complex could counteract Cd to reduce its ill effect. PMID:8580524

  3. Fluorescence sensitization of gold-glutathione nanoclusters by aqueous solutions of sodium and potassium ions

    International Nuclear Information System (INIS)

    Gold nanoclusters (Au-NCs) are powerful alternatives to commonly used dyes for use in fluorescent assays and in imaging. This is due to their high brightness and biocompatibility. Glutathione protected gold nanoclusters (Au-NCs-GSH) were used to investigate the effect of sodium and potassium ions (at 0.1 to 1 mM concentrations) on their fluorescence. It was found that addition of these alkali ions does not modify the emission wavelength of AuNCs-GSH, but fluorescence intensity undergoes a gradual increase (by ∼130 %) until a plateau is reached. Fluorescence is particularly enhanced by KSCN. The effect is interpreted in terms of a decrease in the band gap of the AuNCs-GSH that depends on the nature of the anion. The results illustrate the role of anions and monovalent cations commonly used in buffers with respect to the tuning of the fluorescence of AuNCs-GSH. The findings should be taken into account when using AuNCs-GSH in assays based on fluorescence enhancement or quenching. (author)

  4. Aqueous systems of ethanolamine hydrochlorides and of chlorides of cerium, terbium, dysprosium, erbium

    International Nuclear Information System (INIS)

    The isothermal method of cross sections has been used to study the solubility at 25 and 50 deg C in ternary water-salt systems consisting of cerium chloride and mono-(1), di-(2) and triethanolamine (3) hydrochlorides as well as diethanolamine hydrochloride and terbium, dysprosium and erbium chlorides. Solubility isotherms testify to the formation in the system (1) of a congruently dissolved compound of the CeCl3x2(C2H4OHNN2HCl)x2H2O composition. Individual peculiarities of a new solid phase are proved by the DTA method by means of derivatograph ODL-106, while the composition is confirmed by chemical analysis. The rest of the systems - are of simple eutonic type

  5. Hydration of the chloride ion in concentrated aqueous solutions using neutron scattering and molecular dynamics

    Czech Academy of Sciences Publication Activity Database

    Pluhařová, Eva; Fischer, H. E.; Mason, Philip E.; Jungwirth, Pavel

    2014-01-01

    Roč. 112, 9/10 (2014), s. 1230-1240. ISSN 0026-8976 R&D Projects: GA ČR GBP208/12/G016; GA MŠk LH12001 Grant ostatní: GA MŠk(CZ) LM2010005 Institutional support: RVO:61388963 Keywords : lithium * solution * molecular dynamics * chloride * neutron scattering Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.720, year: 2014

  6. Surface tension measurements of aqueous ammonium chloride (NH4Cl) in air

    Science.gov (United States)

    Lowry, S. A.; Mccay, M. H.; Mccay, T. D.; Gray, P. A.

    1989-01-01

    Aqueous NH4Cl's solidification is often used to model metal alloy solidification processes. The present determinations of the magnitude of the variation of aqueous NH4Cl's surface tension as a function of both temperature and solutal concentration were conducted at 3, 24, and 40 C over the 72-100 wt pct water solutal range. In general, the surface tension increases 0.31 dyn/cm per percent decrease in wt pct of water, and decreases 0.13 dyn/cm for each increase in deg C. Attention is given to the experimental apparatus employed.

  7. Scientific Opinion on the safety evaluation of the active substances iron, sodium chloride, water, silica gel, activated carbon, monosodium glutamate, potassium acid tartrate, powdered cellulose, malic acid, chabazite, hydroxypropyl cellulose, potassium carbonate, sodium thiosulfate, propylene glycol, glycerin, polyethyleneglycol sorbitan monooleate, sodium propionate and clinoptilolite for use in food contact materials

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF

    2013-04-01

    Full Text Available This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety evaluation of iron based oxygen absorber systems comprising iron, sodium chloride, water, silica gel, activated carbon, monosodium glutamate, potassium acid tartrate, powdered cellulose, malic acid, chabazite, hydroxypropyl cellulose, potassium carbonate, sodium thiosulfate, propylene glycol, glycerin, polyethyleneglycol sorbitan monooleate, sodium propionate and clinoptilolite, incorporated in sachets, patches and cards. Iron, the main active ingredient reacts with oxygen to form iron hydroxide and iron oxide, thereby removing oxygen from the primary packaging. Only activated carbon has not been evaluated as such, but it meets the specifications for activated charcoal which is authorised as additive for plastic materials and articles in contact with foods. All other ingredients of the oxygen absorber formulations have been evaluated and approved for use as additives in plastic food contact materials and/or as food additives and/or food supplements or feed additives. The active system being based on solid ingredients and not intended for direct contact with liquid food or food with an external liquid surface, migration through the gas phase was screened for 9 representative active systems. No volatiles derived from the active mixtures were detected. Therefore the CEF Panel concluded that the substances do not raise a safety concern when used in oxygen absorbers in sachets, patches or cards, placed in the headspace of the packaging or when used in direct contact with food, excluding liquid food or foods that have an external aqueous liquid phase on the surface such as sliced fruits and fresh meat.

  8. A conductivity study of unsymmetrical 2:1 type "complex ion" electrolyte: cadmium chloride in dilute aqueous solutions.

    Science.gov (United States)

    Apelblat, Alexander; Esteso, Miguel A; Bešter-Rogač, Marija

    2013-05-01

    Systematic and precise measurements of electrical conductivities of aqueous solutions of cadmium chloride were performed in the 2 × 10(-5)-1 × 10(-2) mol·dm(-3) concentration range, from 278.15 to 313.15 K. Determined conductances were interpreted in terms of molecular model which includes a mixture of two 1:1 and 2:1 electrolytes. The molar limiting conductances of λ(0)(CdCl(+), T) and λ(0)(1/2Cd(2+), T), the equilibrium constants of CdCl(+) formation K(T) and the corresponding standard thermodynamic functions were evaluated using the Quint-Viallard conductivity equations, the Debye-Hückel equations for activity coefficients and the mass-action equation. An excellent agreement between calculated and experimental conductivities was reached. PMID:23534843

  9. 氯化铵和氯化钾对太湖黄泥土磷的吸持动力学影响的研究%Effects of ammonium chloride and potassium chloride on kinetics of phosphorus sorption of Taihu Paddy soil

    Institute of Scientific and Technical Information of China (English)

    李寿田; 周健民; 王火焰; 杜昌文; 陈小琴

    2012-01-01

    土壤中磷的移动性、植物有效性和对水体环境的潜在危害性与土壤对磷的吸持反应有关,而铵钾磷共施是农业生产中的普遍现象,因此,本文通过批量培养法,研究了相同摩尔数的氯化铵和氯化钾对磷的吸持动力学的影响,并对磷的吸持动力学进行了不同模型的拟合.结果表明,氯化铵、氯化钾均显著增加了土壤对磷的吸持,在培养初期(5 min),相同摩尔数的氯化铵、氯化钾对磷的吸持量无显著差异,但在15 min ~ 10 d阶段,相同摩尔数的氯化钾对磷吸持量的影响显著大于相同摩尔数的氯化铵.而铵钾共施时,两者对磷的吸持具有协同作用,并主要表现为氯化钾的作用.氯化铵对土壤磷吸持总量无显著影响,氯化钾则显著增加了土壤磷吸持总量,氯化钾和氯化铵处理土壤磷吸收总量则无显著差异.通过比较不同模型拟合的决定系数(R2)大小,不同模型拟合效果顺序为Elovich方程>双常数方程>Parabolic扩散方程>零级方程>一级方程>二级方程.%Translocation, plant availability, and hazard potential to water environment of soil phosphorus are related with phosphorus sorption of soil, and it is very common to apply fertilizer by compounding ammonium, potassium and phosphorus together in agricultural production. In this article, the effects of ammonium chloride and potassium chloride on kinetics of phosphorus sorption of paddy soil were conducted by the batch culture, and kinetics of phosphorus sorption was fitted to different models. The results showed that amounts of adsorbed phosphorus were significantly increased by the addition of ammonium chloride and potassium chloride, and there is no significant difference in amounts of phosphorus sorption between ammonium chloride and potassium chloride at the same mole number at the initial culture period, but amounts of phosphorus sorption treated with potassium chloride was significantly more than

  10. Yield and chemical composition of tobacco leaves of different cultivars as affected by four levels of potassium chloride

    International Nuclear Information System (INIS)

    An outdoor pot experiment was conducted to evaluate response of ten tobacco (Nicotiana tabacum) cultivars to KCl induced chloride toxicity at the Tobacco Research Station, Mardan, Pakistan, during 2002. The study included four levels of KCl, which were: 0,4, 8 and 12 mmol kg-1 soil and was arranged according to 4x I 0 factorial design with three replications. Seedlings of the respective cultivars, Spt-G28, KHG-14, KHG-15, KHG-18, Coker-371 Gold, Candel, KHG-19, K-399, Coker-48 and Coker-I76 were planted in pots containing 5 kg normal soil. After establishment of the seedlings, the respective amount of KCl was applied in one liter of water and then irrigated with normal water for the rest of the growing period. The data showed that all growth parameters increased with the initial dose of 4 mmol kg-I of KCl, but then decreased with higher levels due to chloride toxicity. When averaged across cultivars, the highest seedling height (17.4 cm), number of leaves per plant (8.7), leaf area (42.0 cm/sup 2/), and dry weight (10.17 g per pot) were recorded in treatments receiving 4 mmo1 KCl kg/sup -1/ soil. Chloride, reducing sugars, nicotine and K content of leaves showed linear regression with KCl levels (r > 0.95), producing 250, 74.33, 18.62 and 14.14% increase at 12 mmol kg-I soil, respectively, as compared to control. Nitrogen content of leaves also increased with increasing KCl levels in most of the cultivars showing an overall increase of 12.46%, as compared to control. Unlike other growth parameters, ash content increased with increase in KCl level up to the higher dose of 12 mmol kg/sup -I/ soil. Cultivars showed differential response to the KCl induced chloride toxicity. KHG-14 was found to be the most sensitive cultivar regarding growth parameters, while KHG-18 and KHG-15 recorded higher changes in chemical composition to KCl application. Considering the overall performance, Spt-G.28 was found to be the most suitable variety producing higher plant height, number

  11. Structural transformations of the synthetic salt 4`, 7-dihydroxyflavylium chloride in acid and basic aqueous solutions. Part 1-Ground state

    Energy Technology Data Exchange (ETDEWEB)

    Pina, F.; Benedito, L.; Melo, M.J.; Parola, A.J. [Centro de Quimica Fina e Biotecnologia. Departamento de Quimica FCT/UNL, Portugal (Portugal); Lima, J.C.; Macanita, A.L. [Instituto de Tecnologia Quimica e Biologica, Portugal (Portugal)

    1997-09-01

    A complete study of the structural pH dependent transformations of the synthetic flavylium salt 4`-7-dihydroxyflavylium chloride (DHF), occurring in aqueous solutions, including the basic region, is described. The kinetics study of the transformations occurring in acidic media (quinoidal base (A) {l_reversible} flavylium cation (AH{sup +}) {l_reversible} hemiacetal (B) {l_reversible} cis-chalcone (C-cis) {l_reversible} trans-chalcone (C-trans)) allowed to conclude that the cis-transisomerization is faster than the tautomerization and the hydration processes, which is unique in the anthocyanins family. Results obtained with the parent compound 4`-7-dimethoxyflavylium chloride (DMF)with relevance to this study are also presented. In equilibrated basic solutions the existence of acid-base equilibria involving the trans-Chalcone (C-trans) and its conjugated bases, (C-trans, and C``2-trans), was detected. Freshly prepared solutions at pH>7 show also the presence of a transient species identified as the ionized quinoidal base (A``-), which is almost completely converted into C``2-trans with a Ph dependent rate constant, (Author) 17 refs.

  12. Conductivity and Viscosity Measurements for Binary Lysozyme Chloride Aqueous Solution and Ternary Lysozyme-Salt-Water Solution

    CERN Document Server

    Buzatu, D; Buzatu, F D

    2004-01-01

    We use the conductimetric method, adequate to electrolytes, to determine the lysozyme charge in lys-water and ternary lys-salt-water systems. We measured also the viscosities for the above binary and ternary systems in the same conditions at pH$=4.5$ and T$=298$ K, measurements that allow us to see any effect of viscosity on cations mobilities and implicitly on the lysozyme charge. The method is illustrated for the lysozyme chloride aqueous solution system at 25$^o$ C, using the data reported here for pH$=4.5$ at 0.15, 0.6, 0.8, 1., 1.5, 2., 2.5, 3., 3.5 mM (mg/mL) lysozyme chloride concentrations. The method was also applied to ternary lys-salt-water systems in the same conditions at pH$=4.5$ and T$=25^o$ C. Ternary conductivities are reported for a mean concentration 0.6 mM of lysozyme chloride in all systems and a mean concentration 0.01, 0.025, 0.05, 0.1, 0.175, 0.2, 0.5, 0.7, 0.9, 1.2, 1.3 and 1.4 M for NaCl; 0.005, 0.01, 0.05, 0.1, 0.175, 0.2, 0.5, 0.7, 0.9, 1.2, 1.3, 1.4 and 1.5 M for KCl; 0.005, 0.01,...

  13. Reaction of bis[trialkyl(aryl)arsonium]-1,4-dihydronaphthalene iodides with mercury(2) iodide in aqueous-alcoholic solutions of potassium iodide

    International Nuclear Information System (INIS)

    Composition of mercury complex iodides, formed in the course of interaction between bis[trialkyl(aryl)arsonium]-1,4-dihydronaphthalene iodides and mercury(2) iodide in aqueous-alcoholic solution in the presence of potassium iodide excess was studied using the methods of chemical analysis, conductivity and IR spectroscopy. It was ascertained that under the conditions mentioned bisarsonium triiodomercurates are formed with the yield of 72-87%. The studies conducted confirm the potentiality of formation of mercury complex iodides of [HgI3]- composition in aqueous solutions of alkali metal iodides in the presence of some organic cations

  14. Anodic behaviour of the stainless steel AISI 430 in aqueous solutions of chloride and sulphate ions

    International Nuclear Information System (INIS)

    The kinetics of the dissolution of stainless steel AISI 430 in the presence of chloride and sulphate ions has been studied in terms of the ion concentration, the pH variation, and the velocity of the working electrode. The experimental method utilized was the potentiostatic anodic polarization, and the reactants used were NaCl and Na2 SO4 at room temperature. Atomic Absorption spectrophotometry and Auger Electrons spectroscopy (AES) analyses were made in order to support the interpretation of results obtained by means of the potentiostatic polarization method. (author)

  15. Aggregation and adsorption behavior of cetylpyridinium chloride in aqueous sodium salicylate and sodium benzoate solutions.

    Science.gov (United States)

    Mukhim, T; Dey, J; Das, S; Ismail, K

    2010-10-15

    The critical micelle concentration (cmc) values of cetylpyridinium chloride (CPC) were determined in the presence of salicylate and benzoate ions in the less explored concentration region where viscosity is Newtonian. The cmc of CPC decreased from 9 x 10(-4) to 7 x 10(-7) and 3 x 10(-6) mol kg(-1) by adding about 0.3 mol kg(-1) of salicylate and benzoate, respectively. The ortho hydroxyl group in salicylate thus has a remarkable influence on the micellization of CPC and the extent of this favorable effect is found to be about 3.5 kJ mol(-1). The Corrin-Harkins equation was modified to explain the variation of cmc with electrolyte concentration in the presence of mixed counterions. The slope of the equation does not provide the value of the total counterion binding constant (beta), but gives us information about the lower limit to the value of beta, which is found to be 0.66. Addition of salicylate and benzoate increases the counterion binding to CPC micelles compared to that in the presence of chloride alone. An adsorption isotherm was derived to estimate the surface excess of CPC in the presence of mixed counterions. PMID:20673910

  16. Solubility of proline-leucine dipeptide in water and in aqueous sodium chloride solutions from T = (288.15 to 313.15) K

    International Nuclear Information System (INIS)

    Solubility of proline-leucine dipeptide, in water and in aqueous sodium chloride solutions, was measured at T = (288.15, 298.15, 308.15 and 313.15) K as a function of electrolyte concentration m = (0.1, 0.25, 0.5, 0.75 and 1) mol . kg-1 of water. Solubility data has been evaluated from density measurements using a vibrating tube densimeter. It has been observed that sodium chloride renders the dipeptide proline-leucine more soluble in water. Salting-in coefficients and standard free energies of transfer of proline-leucine, from water to aqueous sodium chloride solutions, have been calculated from the solubility data. Standard enthalpies and entropies of transfer have also been estimated and interpreted in terms of electrostatic and hydrophobic perturbed domains in the hydration shells of the dipeptide and of the cation and anion of the salt, as a function of temperature and salt concentration

  17. Comparison, artificial neural network modeling and genetic algorithm optimization of the resinoid and potassium yields from white lady’s bedstraw (Galium mollugo L.) by conventional, reflux and ultrasound-assisted aqueous-ethanolic extraction

    OpenAIRE

    Milić Petar S.; Rajković Katarina M.; Milićević Predrag M.; Milić Slavica M.; Brdarić Tanja P.; Pavelkić Vesna M.

    2013-01-01

    In this work, the yields of resinoid and potassium obtained from aerial parts of white lady’s bedstraw (Galium mollugo L.) by maceration, reflux extraction and ultrasound-assisted extraction using aqueous ethanol solutions as solvents. The main goal was to define the influence of the extraction technique and the ethanol concentration on the resinoid and potassium yields. The resinoid and potassium yields were determined by the solvent evaporation from the liquid extracts to constant wei...

  18. Modeling and Simulation of CO2 Absorption into Promoted Aqueous Potassium Carbonate Solution in Industrial Scale Packed Column

    Directory of Open Access Journals (Sweden)

    Ali Altway

    2015-07-01

    , F., Mulya, H.R., Altway, S. (2015. Modeling and Simulation of CO2 Absorption into Promoted Aqueous Potassium Carbonate Solution in Industrial Scale Packed Column. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2: 111-124. (doi:10.9767/bcrec.10.2.7063.111-124 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7063.111-124 

  19. Mechanism of Cl2- formation during pulsed radiolysis of neutral aqueous solutions of alkali metal chlorides

    International Nuclear Information System (INIS)

    The kinetics of accumulation and destruction of Cl2- in pulsed radiolysis of neutral aqueous solutions of KCl has been investigated. It is assumed that the process mechanism includes the reactions [H3O+...OH]+Cl- → Cl+2H2O (1). It is shown that reaction (2) is the rate-limiting stage of formation of Cl2-. Using a computer the authors calculated the rate constants of reactions (2) and (3), which were found to be equal to 7.6x105 l/molxsec and 1.7x1010 l/molxsec, respectively

  20. Perchlorate production by ozone oxidation of chloride in aqueous and dry systems

    International Nuclear Information System (INIS)

    Overwhelming evidence now exists that perchlorate is produced through natural processes and can be ubiquitously found at environmentally relevant concentrations in arid and semi-arid locations. A number of potential production mechanisms have been hypothesized and ClO4- production by ozone oxidation of surface bound Cl- was demonstrated. However, no information concerning the impact of concentration, final reaction products distribution, impact of reaction phase, or oxidation of important oxychlorine intermediates has been reported. Using IC-MS-MS analysis and replicate oxidation experiments, we show that exposing aqueous solutions or Cl- coated sand or glass surfaces to O3 (0.96%) generated ClO4- with molar yields of 0.007 and 0.01% for aqueous Cl- solutions and 0.025 and 0.42% for Cl- coated sand and glass, respectively. Aqueous solutions of Cl- produced less ClO4- than Cl- coated sand or glass as well as a higher ratio of ClO3- to ClO4-. Reduction of the initial Cl- mass resulted in substantially higher molar yields of ClO4- and ClO3-. In addition, alkaline absorbers that captured gaseous products contained substantial quantities of Cl-, ClO3-, and ClO4-. Solutions of possible oxychlorine intermediates (OCl- and ClO3-) exposed to O3 produced only scant amounts of ClO4- while a ClO2- solution exposed to O3 produced substantial molar yields of ClO4- (4% molar yield). Scanning electron microscopy coupled with energy energy-dispersive X-ray analysis demonstrated a significant loss of Cl- and an increase in oxygen on the Cl- coated silica sand exposed to O3. While the experimental conditions are not reflective of natural conditions this work clearly demonstrates the relative potential of Cl- precursors in perchlorate production and the likely importance of dry aerosol oxidation over solution phase reactions. It also suggests that ClO2- may be a key intermediate while ClO3- and OCl- are unlikely to play a significant role

  1. Removal of blue 1 dye of aqueous solutions with a modified clay with iron chloride

    International Nuclear Information System (INIS)

    At the present time, several technologies have been proposed to remove dyes from water, adsorption is one of the most feasible methods and adsorbents with different properties, such as activated carbon, zeolites, clays and hydrogels among others. In this work, the sorption behavior of blue 1 dye by a natural clay from a site located in the Center-East of Mexico, and other modified with iron chloride were determined. The materials were characterized by X-ray diffraction to analyze its crystal structure, by scanning electron microscopy and elemental microanalysis of energy dispersive X-ray spectrometry to determine the composition and morphology, and the zero point charges were also determined to know the charge distribution on the surface of the clay. The ph effect, contact time, dye concentration and temperature were the parameters considered in this study. The results showed that clay does not suffer any important changes in its structure after the chemical treatments (modification with ferric chloride and contact with blue 1 solutions). The ph influences lightly the adsorption of the dye with natural clay, but the same effect is not observed in the ferric modified clay among the factor ph 6 and 8. The equilibrium time and the sorption capacity for natural clay were 48 hours and 6.16 mg/g, while for the ferric clay were 24 hours and 14.22 mg/g. Adsorption kinetics results were best adjusted to the pseudo first and pseudo second order models. Adsorption isotherms were best adjusted to the Langmuir model, indicating that both clays have a homogeneous surface. Thermodynamic parameters (E, ΔS and ΔG and ΔH) were calculated for the dye adsorption by the natural clay using data of the adsorption kinetics at temperatures between 20 and 50 C, indicating that the adsorption process is exothermic. For the case of ferric clay, it was not possible to calculate these thermodynamic parameters because the adsorption capacities were similar in the range of selected

  2. Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment

    International Nuclear Information System (INIS)

    WC-17Co coatings with Ni-5Al bonding layers were deposited on Al-7075 by HVOF spraying. The top-coat consisted of layers comprising tungsten carbide particles embedded in a Co(W,C) matrix of varied composition.The coated specimens were subjected to potentiodynamic polarization in 3.5% aqueous NaCl at 25, 35 and 45 deg. C. The coatings exhibited pseudopassivity caused by the oxidation of tungsten, carbon and possibly cobalt. Chronoamperometric measurements indicated that the inhomogeneous binder composition induced active corrosion processes taking place simultaneously with pseudopassivity. Cyclic polarization suggested that the coatings were not susceptible to pit corrosion in the temperature range of 25-45 deg. C. The likely 'critical pitting' temperature of the coatings was 60 deg. C. Higher testing temperatures led to lower corrosion potentials and faster corrosion kinetics

  3. Measurements of Multicomponent Diffusion Coefficients for Lysozyme Chloride in Water and Aqueous Na$_2$SO$_4$

    CERN Document Server

    Buzatu, D; Buzatu, F D; Albright, J G

    2004-01-01

    This paper presents a diffusion experimental study for ternary lysozyme-Na$_2$SO$_4$-water system, from moderate precipitant concentrations into the supersaturated region and provides a complete set of four diffusion coefficients. These data are important in order to provide accurate models of protein diffusion with applications in growth of protein crystals for X-ray diffraction studies. All three-component mutual-diffusion experiments reported here were performed by Rayleigh interferometry at pH$=4.5$, T$=25^o$ C and at a mean lysozyme concentration (average of top and bottom solution concentrations) of 0.6 mM (8.6 mg/mL). Four experiments, with different combinations of protein and Na$_2$SO$_4$ concentration differences, were performed at each of five mean Na$_2$SO$_4$ concentrations (0.1, 0.25, 0.5, 0.65 and 0.8 M), for a total of 20 experiments. In addition, we have measured dynamic light-scattering diffusion coefficients of the ternary system lysozyme chloride-Na$_2$SO$_4$-water.

  4. Cellulose aerogels prepared from an aqueous zinc chloride salt hydrate melt.

    Science.gov (United States)

    Schestakow, Maria; Karadagli, Ilknur; Ratke, Lorenz

    2016-02-10

    Monolithic cellulose aerogels are prepared using a salt hydrate melt based on cheap zinc chloride tetrahydrate (ZnCl2·4H2O) that can be washed out of the wet gel-body by using common solvents such as water, ethanol, isopropanol or acetone. Cellulose aerogels with concentrations of 1-5 wt.% cellulose were produced. These aerogels are characterized with respect to shrinkage, density and surface area as well as mechanical properties and micro-structure via SEM. Cellulose aerogels regenerated in acetone show a specific surface area of around 340 m(2)g(-1) being 60% higher than those regenerated in water. The onset of irreversible plastic deformation under compressive load is around 0.8 MPa for acetone-regenerated aerogels and thus a factor of two larger compared to ethanol regenerated ones. The Young's modulus depends almost linearly on the cellulose concentration which is observed for all regenerative fluids with the exception of water. The results achieved are presented in light of the polarity and ability of solvation of ZnCl2·4H2O in the regenerative fluids used. PMID:26686174

  5. Calcium chloride and calcium bromide aqueous solutions of technical and analytical grade in Lemna bioassay.

    Science.gov (United States)

    Vujević, M; Vidaković-Cifrek, Z; Tkalec, M; Tomíc, M; Regula, I

    2000-11-01

    Saturated water solutions of calcium chloride, calcium bromide and their 1:1 mixture are commonly used as "high density brines" for pressure control in oil wells. To compare the effect of these chemicals of technical grade with the effect of the chemicals of analytical grade the Lemna test was used. The multiplication rate, fresh weight, dry to fresh weight ratio, area covered by plants and chlorophyll content were measured as toxicity parameters. The concentrations of tested chemicals were 0.025, 0.05. 0.075 and 0.1 mol dm(-3). Generally, the chemicals of both technical and analytical grade in concentrations of 0.025 mol dm(-3) stimulated the Lemna minor growth, while tested chemicals in concentrations of 0.05 mol dm(-3) did not affect the growth significantly. The exceptions were results obtained by measuring fresh weight. Most of tested chemicals in concentrations of 0.075 mol dm(-3) and all chemicals in concentrations of 0.1 mol dm(-3) reduced the growth. No major differences between effects of tested chemicals of technical and analytical grade on plant growth were observed, except that tested chemicals of analytical grade in concentrations of 0.1 mol dm(-3) increased dry to fresh weight ratio much stronger than chemicals of technical grade. All tested chemicals in all concentrations increased chlorophyll content. After treatment with chemicals of analytical grade much higher increase of chlorophyll a concentration in comparison to increase of chlorophyll b was noticed, while chemicals of technical grade caused more prominent increase of chlorophyll b. PMID:11057678

  6. Electrochemical oxidation of synthetic tannery wastewater in chloride-free aqueous media

    International Nuclear Information System (INIS)

    The electrochemical treatment of a synthetic tannery wastewater, prepared with several compounds used by finishing tanneries, was studied in chloride-free media. Boron-doped diamond (Si/BDD), antimony-doped tin dioxide (Ti/SnO2-Sb), and iridium-antimony-doped tin dioxide (Ti/SnO2-Sb-Ir) were evaluated as anode. The influence of pH and current density on the treatment was assessed by means of the parameters used to measure the level of organic contaminants in the wastewater; i.e., total phenols, chemical oxygen demand (COD), total organic carbon (TOC), and absorbance. Results showed that faster decrease in these parameters occurred when the Si/BDD anode was used. Good results were obtained with the Ti/SnO2-Sb anode, but its complete deactivation was reached after 4 h of electrolysis at 25 mA cm-2, indicating that the service life of this electrode is short. The Ti/SnO2-Sb-Ir anode is chemically and electrochemically more stable than the Ti/SnO2-Sb anode, but it is not suitable for the electrochemical treatment under the studied conditions. No significant changes were observed for electrolyses performed at different pH conditions with Si/BDD, and this electrode led to almost complete mineralization after 4 h of electrolysis at 100 mA cm-2. The increase in current density resulted in faster wastewater oxidation, with lower current efficiency and higher energy consumption. Si/BBD proved to be the best electrodic material for the direct electrooxidation of tannery wastewaters.

  7. Environmentally Assisted Cracking of Alloy 7050-T7451 Exposed to Aqueous Chloride Solutions

    Science.gov (United States)

    Braun, Reinhold

    2016-03-01

    The stress corrosion cracking (SCC) behavior of 7050-T7451 plate material was investigated in short-transverse direction performing constant load and constant extension rate tests. Smooth and notched tensile specimens were permanently immersed in substitute ocean water and in an aqueous solution of 0.6 M NaCl + 0.06 M (NH4)2SO4. Alloy 7050-T7451 exhibited high SCC resistance in both synthetic environments. However, conducting cyclic loading tests, environment-induced cracking was observed. Applying a sawtooth waveform, notched tensile specimens were strained under constant load amplitude conditions at constant displacement rates ranging from 2 × 10-6 to 2 × 10-4 mms-1. The stress ratio R = σ min/ σ max was 0.1 with maximum stresses of 300 and 400 MPa. When cyclically loaded in substitute ocean water, notched specimens failed predominantly by transgranular environment-induced cracking. Striations were observed on the cleavage-like facets. The number of cycles-to-failure decreased with decreasing displacement rate. A slope of 0.5 was obtained by fitting the logarithmic plot of number of cycles-to-failure vs nominal loading frequency, indicating a hydrogen embrittlement mechanism controlled by diffusion.

  8. Sodium instead of potassium and chloride is an important macronutrient to improve leaf succulence and shoot development for halophyte Sesuvium portulacastrum.

    Science.gov (United States)

    Wang, Dongyang; Wang, Haiyan; Han, Bing; Wang, Bin; Guo, Anping; Zheng, Dong; Liu, Chongjing; Chang, Lili; Peng, Ming; Wang, Xuchu

    2012-02-01

    Soil salinity is contributed largely by NaCl but some halophytes such as Sesuvium portulacastrum have evolved to adapt salinity environment and demonstrate optimal development under moderate salinity. To elucidate the detail mechanisms of the great salt tolerance and determine the respective contributions of Na(+), K(+) and Cl(-) on the development of S. portulacastrum, morphological and physiological analysis were performed using plants supplied with 200 mM of different ions including cations (Na(+), K(+), Li(+)) and anions (Cl(-), NO(3)(-), Ac(-)) respectively. The results revealed that the salt-treated plants accumulated large amounts of sodium in both leaf and stem. There was a greater shoot growth in presence of external Na(+) compared to K(+) and Cl(-). Na(+) was found more effective than K(+) and Cl(-) in cell expansion, leaf succulence, and shoot development. Flame emission and X-Ray microanalysis revealed the relative Na(+) content was much higher than K(+) and Cl(-) in both leaf and stem of well developed S. portulacastrum, leading to a higher Na(+)/K(+) ratio. The effects of different ions on the development of S. portulacastrum were listed as the following: Na(+) > NO(3)(-) > CK > Cl(-) > K(+) > Ac(-) > Li(+). These results demonstrated NaCl toxicity is attributable largely to the effect of Cl(-) but rarely to Na(+), and thus sodium is concluded as a more important macronutrient than potassium and chloride for improving leaf succulence and shoot development of halophyte S. portulacastrum. PMID:22153240

  9. General anaesthetics do not impair developmental expression of the KCC2 potassium-chloride cotransporter in neonatal rats during the brain growth spurt

    KAUST Repository

    Lacoh, Claudia Marvine

    2013-03-26

    BackgroundThe developmental transition from depolarizing to hyperpolarizing γ-aminobutyric acid-mediated neurotransmission is primarily mediated by an increase in the amount of the potassium-chloride cotransporter KCC2 during early postnatal life. However, it is not known whether early neuronal activity plays a modulatory role in the expression of total KCC2 mRNA and protein in the immature brain. As general anaesthetics are powerful modulators of neuronal activity, the purpose of this study was to explore how these drugs affect KCC2 expression during the brain growth spurt.MethodsWistar rat pups were exposed to either a single dose or 6 h of midazolam, propofol, or ketamine anaesthesia at postnatal days 0, 5, 10, or 15. KCC2 expression was assessed using immunoblotting, immunohistochemistry, or quantitative polymerase chain reaction analysis up to 3 days post-exposure in the medial prefrontal cortex.ResultsThere was a progressive and steep increase in the expression of KCC2 between birth and 2 weeks of age. Exposure to midazolam, propofol, or ketamine up to 6 h at any investigated stages of the brain growth spurt did not influence the expression of this cotransporter protein.ConclusionI.V. general anaesthetics do not seem to influence developmental expression of KCC2 during the brain growth spurt. © 2013 © The Author [2013].

  10. A Fiber-Optic Sensor Using an Aqueous Solution of Sodium Chloride to Measure Temperature and Water Level Simultaneously

    Directory of Open Access Journals (Sweden)

    Wook Jae Yoo

    2014-10-01

    Full Text Available A fiber-optic sensor system using a multiplexed array of sensing probes based on an aqueous solution of sodium chloride (NaCl solution and an optical time-domain reflectometer (OTDR for simultaneous measurement of temperature and water level is proposed. By changing the temperature, the refractive index of the NaCl solution is varied and Fresnel reflection arising at the interface between the distal end of optical fiber and the NaCl solution is then also changed. We measured the modified optical power of the light reflected from the sensing probe using a portable OTDR device and also obtained the relationship between the temperature of water and the optical power. In this study, the water level was simply determined by measuring the signal difference of the optical power due to the temperature difference of individual sensing probes placed inside and outside of the water. In conclusion, we demonstrate that the temperature and water level can be obtained simultaneously by measuring optical powers of light reflected from sensing probes based on the NaCl solution. It is anticipated that the proposed fiber-optic sensor system makes it possible to remotely monitor the real-time change of temperature and water level of the spent fuel pool during a loss of power accident.

  11. Removal of malachite green dye from aqueous solution using mesoporous silica synthesized from 1-octyl-3-methylimidazolium chloride ionic liquid

    Science.gov (United States)

    Ekka, Basanti; Nayak, Soumitra Ranjan; Dash, Priyabrat; Patel, Raj Kishore

    2016-04-01

    In this research, mesoporous silica was synthesized via a modified sol-gel route using 1-octyl-3-methylimidazolium chloride and was employed to remove malachite green (MG) dye from aqueous solution. Subsequently, this material was characterized and identified by different techniques such as Fourier transform infrared spectroscopy (FT-IR), N2 adsorption-desorption method, scanning electron microscopy (SEM), and thermosgravimetric analysis (TGA). Unique properties such as high surface area and pore diameter, in addition to highly reactive atoms and presence of various functional groups make the mesoporous silica possible for efficient removal of malachite green (MG). In batch experimental set-up, optimum conditions for quantitative removal of MG by mesoporous silica was attained by varying different variables such as adsorbent dosage, initial dye concentration, contact time, and pH. Optimum values were set as pH of 8.0, 0.5 g of adsorbent at contact time of 120 min. The adsorption of MG follows the pseudo-second-order rate equation. Equilibrium data fitted well with the Freundlich model at all amount of adsorbent, while maximum adsorption capacity was 5.981 mg g-1 for 0.5 g mesoporous silica synthesized in IL.

  12. Role of Citrate Ions in the Phosphonate-based Inhibitor System for Mild Steel in Aqueous Chloride Media

    Directory of Open Access Journals (Sweden)

    G. Gunasekaran

    2005-01-01

    Full Text Available The corrosion inhibition efficiency of phosphonic acid and its derivatives for the inhibition of corrosion of mild steel in neutral chloride media is decided by its ability to form protectivefilm over the surface. In this context, the effect of addition of metal cations and certain organic compounds, such as citrate in conjugation with phosphonic acid to impart synergistic corrosion inhibition has been explored. The experiments were carried out using various concentrations of trisodium citrate and zinc ions in an aqueous solution of 2-carboxyethyl phosphonic acid (2CEPA at 25 ppm. The corrosion characteristics have been determined using electrochemical impedance spectroscopy together with determination of corrosion rate by weight-loss method. It has been observed that a combination of inhibitive ions, namely citrate, ZCEPA, and zinc ions at 25 ppm gives 96 per cent inhibition efficiency and this corrosion inhibition is due to the formation of a protective film. By increasing the concentration of citrate beyond 25 ppm, the corrosion inhibition efficiency decreases. This paper discusses the role of citrate and zinc ions in imparting added corrosion inhibition ability using 2CEPA on the basis of experimental results.

  13. Lead removal from aqueous solutions by potassium titanate doped with silica; Remocion de plomo de soluciones acuosas por titanato de potasio dopado con silice

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar G, M. A.; Aguilar E, A. [Centro de Investigacion en Materiales Avanzados, Miguel de Cervantes No. 120, 31109 Chihuahua (Mexico); Gorokhovsky, A. V.; Escalante G, J. I. [Centro de Investigacion y de Estudios Avanzados, Unidad Saltillo, Carretera Saltillo-Mty Km. 13, Apdo. Postal 663, Saltillo 25000, Coahuila (Mexico)], e-mail: mgzlz@hotmail.com

    2009-07-01

    This paper is related to elimination of Pb{sup 2+} ions from aqueous solutions by adsorption in potassium tetra titanate doped with silica. The adsorbent was prepared in the form of granules with pastes of potassium poly titanate (45 %), powdered Pyrex glass (5 %) and potato starch (50 %), which were extruded and thermally treated at 1100 C. The structural characteristic of the granulated adsorbent allows reducing the Pb concentration, from the solutions eluted through an adsorption column, to levels below the requirement of national standards. The effects of the time of saturation of the adsorbent and the ph of the solution were also investigated on the effectiveness of the adsorption of Pb. The mechanism of lead adsorption, by the developed adsorbent, is considered as a combination of adsorption, ion-exchange and co-precipitation processes. It is also shown that the lead-saturated adsorbent could be utilized to produce high-strength non-dangerous ceramic materials. (Author)

  14. Thermodynamic properties of ions in solutions of sodium and potassium chlorides in H2O-DMSO and D2O-DMSO mixtures of 278-323 K

    International Nuclear Information System (INIS)

    Thermodynamic characteristics of sodium and potassium chlorides ion solvation in mixtures of water and heavy water with dimethylsulfoxide have been obtained from data on temperature dependence of the standard e.m.f. of circuits without transfer. Regularities in their change depending on cation nature, temperature and composition of mixed solvent have been considered. Isotope effect in the Gibbs free energy of ΣNa+, Cl- and ΣK+, Cl- solvation has been calculated. 20 refs.; 3 figs.; 2 tabs

  15. N-[Isononylphenoxypoly(ethyleneoxy)carbonylmethyl]ammonium chlorides as inhibitors of metal corrosion. 1. Inhibition of steel corrosion in aqueous hydrochloric media

    International Nuclear Information System (INIS)

    New ammonium compounds of the type N-[isononylphenoxypoly (ethyleneoxy) carbonylmethyl] ammonium chlorides were synthesized. The compounds were studied as inhibitors of steel corrosion in hydrochloric aqueous media. High efficiency of the corrosion inhibitors suggested is shown. Dependence of their inhibiting properties on the type of substituents at nitrogen atom, length of hydrocarbon radicals and number of ethyleneoxide groups in isononylphenoxypoly (ethyleneoxy) carbonylmethyl radical was revealed

  16. Precipitation of gold by the reaction of aqueous gold(III)-chloride with cyanobacteria at 25-80 C -- Studied by x-ray absorption spectroscopy

    International Nuclear Information System (INIS)

    The mechanisms of gold precipitation by the interaction of cyanobacteria (Plectonema boryanum UTEX 485) and gold(III) chloride aqueous solutions (7.6 mmol/L final gold) have been studied at 25, 60, and 80 C, using both laboratory and real-time synchrotron radiation absorption spectroscopy experiments. Addition of aqueous gold(III) chloride to the cyanobacterial culture initially promoted the precipitation of amorphous gold(I) sulfide at the cell walls and finally caused the formation of octahedral (111) platelets (<1 to 6 (micro)m) of gold metal near cell surfaces and in solutions. X-ray absorption spectroscopy results confirmed that the reduction mechanism of gold(III) chloride to elemental gold by cyanobacteria involves the formation of an intermediate Au(I) species, gold(I) sulfide, with sulfur originating from cyanobacterial proteins, presumably cysteine or methionine. Although the bioreduction of gold(III) chloride to gold(I) sulfide was relatively rapid at all temperatures, the reaction rate increased with the increase in temperature. At the completion of the experiments, elemental gold was the major species present at all temperatures

  17. Comparison, artificial neural network modeling and genetic algorithm optimization of the resinoid and potassium yields from white lady’s bedstraw (Galium mollugo L. by conventional, reflux and ultrasound-assisted aqueous-ethanolic extraction

    Directory of Open Access Journals (Sweden)

    Milić Petar S.

    2013-01-01

    Full Text Available In this work, the yields of resinoid and potassium obtained from aerial parts of white lady’s bedstraw (Galium mollugo L. by maceration, reflux extraction and ultrasound-assisted extraction using aqueous ethanol solutions as solvents. The main goal was to define the influence of the extraction technique and the ethanol concentration on the resinoid and potassium yields. The resinoid and potassium yields were determined by the solvent evaporation from the liquid extracts to constant weight and the AAS emission method, respectively. The dependence of resinoid and potassium yields on the ethanol concentration was described by linear and quadratic polynomial models, respectively. The best potassium extraction selectivity of 0.077 g K/g of dry extract was achieved by maceration at the ethanol concentrations of 10 g/100 g. The artificial neural network (ANN was successfully applied to estimate the resinoid and potassium yields based on the ethanol concentration in the extracting solvent and the time duration for all three extraction techniques employed. The response surface methodology was also used to present the dependence of ANN results on the operating factors. The extraction process was optimized using the ANN model coupled with genetic algorithm. The maximum predicted resinoid and potassium yields of 30.4 and 1.67 g/100 g of dry plant were obtained by the ultrasonic extraction (80 min using the 10 g/100 g aqueous ethanol solution.

  18. (Liquid + liquid) equilibrium of the ternary aqueous system containing poly ethylene glycol dimethyl ether 2000 and tri-potassium citrate at different temperatures

    International Nuclear Information System (INIS)

    Highlights: ► LLE of (poly ethylene glycol dimethyl ether + tri potassium citrate + H2O) was studied. ► The effect of temperature on the binodals and tie-lines were investigated. ► Binodal data were correlated with two empirical equations. ► Tie-lines were fitted to several models including extended NRTL and modified NRTL. ► The entropy is driving force for aqueous two-phase formation. - Abstract: (Liquid + liquid) equilibria (LLE) of the {poly ethylene glycol di-methyl ether 2000 (PEGDME2000) + tri-potassium citrate + H2O} system have been determined experimentally at T = (298.15, 303.15, 308.15, and 318.15) K. The effect of temperature on the binodals and tie-lines for the investigated aqueous two-phase system (ATPS) has also been studied. In this work, the three fitting parameters of the Merchuk equation and an empirical equation that we proposed in our previous work were obtained with the temperature dependence expressed in the linear form with (T − T0) K as a variable. Furthermore, the Othmer–Tobias and Bancroft, a temperature dependent Setschenow-type equation and osmotic virial model, the segment-based local composition models (the extended NRTL and the modified NRTL) were used for the correlation and prediction of the liquid–liquid phase behavior of the system studied. In addition, the effect of the polymers PEGDME2000 and poly ethylene glycol 2000 on the phase forming ability were studied. Also, the free energies of cloud points for this system were calculated from which it was concluded that the increase of the entropy is driving force for formation of studied aqueous two-phase system.

  19. Aqueous two-phase systems of polyoxyethylene lauryl ether and potassium gluconate/potassium oxalate/potassium citrate at different temperature-experimental results and modeling of (liquid + liquid) equilibrium data

    International Nuclear Information System (INIS)

    Highlights: • The phase diagrams of POELE10-organic salts ATPSs were determined experimentally. • The experiential equations were used to correlate the binodal data. • The effect of salt on the binodal curve for the studied systems has been discussed. • The LLE data were correlated using the thermodynamic model. -- Abstract: The binodal data for the systems containing the POELE10 and KC6H11O7/K2C2O4/K3C6H5O7 were determined at the T = (288.15, 298.15, 308.15) K. The three experiential equations were used to fit the binodal data and they achieved the satisfactory fitting effect. The effect of salt type on the phase-seperation ability of salt was studied. It was found that the phase-seperation ability of the salt with the higher valence anion is stronger than that with lower valence anion, namely, the order of the phase-seperation ability for the investigated salts is potassium citrate > potassium oxalate > potassium gluconate, which is also validated by the effective excluded volume (EEV). The (liquid + liquid) equilibrium data for the studied systems were determined and correlated by using the Pitzer–Debye–Hückel equation and Chen-NRTL model along with the Flory–Huggins equation, and good agreement was obtained with using these thermodynamic models

  20. Structural characterization of zinc(II) chloride in aqueous solution and in the protic ionic liquid ethyl ammonium nitrate by x-ray absorption spectroscopy

    Science.gov (United States)

    D'Angelo, Paola; Zitolo, Andrea; Ceccacci, Francesca; Caminiti, Ruggero; Aquilanti, Giuliana

    2011-10-01

    Extended x-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the species and structures existing in a series of ZnCl2-H2O-NaCl solutions with different chloride/zinc ratios and in a solution of ZnCl2 in the protic ionic liquid ethyl ammonium nitrate (EAN). The average coordination numbers and distances of zinc species were determined from the analysis of the EXAFS data. In aqueous solution the number of chloride ions tightly bounded to Zn2+ is significantly related to the chloride/zinc ratio, and no inner complex formation between Zn2+ and Cl- ions has been detected for low ZnCl2 concentration (0.1 and 0.2 M). Conversely, in the same concentration range (0.13 M) the ZnCl2 species do not dissociate in EAN and the Zn2+ first coordination shell has two chloride ions and is completed by two oxygen atoms of the nitrate anion. The results of this investigation show that notwithstanding the existence of similar characteristics between EAN and water, the solvation properties of the two solvents are markedly different.

  1. Inorganic ion exchangers based on manganese and potassium for recovery and removal of pollutant metals of aqueous effluents

    International Nuclear Information System (INIS)

    This work presents a study on the synthesis, characterization and ion exchange properties of inorganic ion exchangers based on manganese and potassium. The ion exchangers were synthesized by calcination of the mixture of manganese(II) oxalate and potassium oxalate and were characterized by granulometer distribution analysis, X-ray powder diffraction, infrared spectroscopy and scanning electron microscopic. From the data obtained in characterization it was observed that exist two distinguished groups of these materials. The first group belong to ion exchangers with up to 30% w/w potassium and the second group formed by the ion exchangers with more than 30% w / w of content of potassium in their compositions. The studies of adsorption of these materials showed that the adsorption of Cd2+ is a function of the following parameters as pH, concentration of Cd2+, time of contact between the ion exchangers the concentration of the Cd2+ solution and the interference of other ions like Ni2+. The great pH of adsorption for these materials occur in pH 9, the study of the influence of the cadmium concentration in the adsorption showed that for a group of exchangers the adsorption decreases with the increase of cadmium concentration and for the other group the adsorption increases with the increase of cadmium concentration. The kinetics of adsorption occur in a contact time between the ion exchangers and the Cd2+ solutions relatively short, at about 15 minutes is necessary to establish the equilibrium. The presence of Ni2+ as interfering ion decreases the adsorption of cadmium of 99,7% to 65%. These inorganic ion exchangers showed be good exchangers for Cd2+. (author)

  2. Correlation between the Increasing Conductivity of Aqueous Solutions of Cation Chlorides with Time and the “Salting-Out” Properties of the Cations

    Directory of Open Access Journals (Sweden)

    Nada Verdel

    2016-02-01

    Full Text Available The time-dependent role of cations was investigated by ageing four different aqueous solutions of cation chlorides. A linear correlation was found between the cations’ Setchenov coefficient for the salting-out of benzene and the increase in the conductivity with time. The conductivity of the structure-breaking cations or the chaotropes increased more significantly with time than the conductivity of the kosmotropes. Since larger water clusters accelerate the proton or hydroxyl hopping mechanism, we propose that the structuring of the hydration shells of the chaotropes might be spontaneously enhanced over time.

  3. Potassium permanganate and tetraethylammonium chloride are a safe and effective substitute for osmium tetroxide in solid-phase fluorescent chemical cleavage of mismatch.

    OpenAIRE

    Roberts, E; DEEBLE, V. J.; Woods, C. G.; Taylor, G R

    1997-01-01

    Whilst chemical cleavage of mismatch (CCM) detects all point mutations in DNA, its widespread use has been hampered by the complex multistage methodology and the need for toxic chemicals, in particular osmium tetroxide. Here we show that osmium tetroxide can be replaced by potassium permanganate, giving the same spectrum of mutation detection, but with greater sensitivity. The use of potassium permanganate is compatible with solid phase capture and fluorescent detection, giving a safer method...

  4. The vapour pressures over saturated aqueous solutions of cadmium chloride, cadmium bromide, cadmium iodide, cadmium nitrate, and cadmium sulphate

    Energy Technology Data Exchange (ETDEWEB)

    Apelblat, Alexander [Department of Chemical Engineering, Ben Gurion University of the Negev, P.O. Box 653, Beer Sheva 84105 (Israel)]. E-mail: apelblat@bgu.ac.il; Korin, Eli [Department of Chemical Engineering, Ben Gurion University of the Negev, P.O. Box 653, Beer Sheva 84105 (Israel)

    2007-07-15

    Vapour pressures of water over saturated solutions of cadmium salts (chloride, bromide, iodide, nitrate, and sulphate) were determined over the temperature range 280 K to 322 K and compared with the literature data. The vapour pressures determined were used to obtain the water activities, osmotic coefficients and the molar enthalpies of vaporization in the (cadmium salt + water) systems.

  5. The vapour pressures over saturated aqueous solutions of cadmium chloride, cadmium bromide, cadmium iodide, cadmium nitrate, and cadmium sulphate

    International Nuclear Information System (INIS)

    Vapour pressures of water over saturated solutions of cadmium salts (chloride, bromide, iodide, nitrate, and sulphate) were determined over the temperature range 280 K to 322 K and compared with the literature data. The vapour pressures determined were used to obtain the water activities, osmotic coefficients and the molar enthalpies of vaporization in the (cadmium salt + water) systems

  6. Removal of copper (II) from aqueous solutions by flotation using polyaluminum chloride silicate (PAX-XL60 S) as coagulant and carbonate ion as activator.

    Science.gov (United States)

    Ghazy, S E; Mahmoud, I A; Ragab, A H

    2006-01-01

    Flotation is a separation technology for removing toxic heavy metal ions from aqueous solutions. Here a simple and rapid flotation procedure is presented for the removal of copper(II) from aqueous solutions. It is based on the use of polyaluminum chloride silicate (PAX-XL60 S) as coagulant and flocculent, carbonate ion as activator and oleic acid (HOL) as surfactant. Both ion and precipitate flotation are included depending on the solution pH. Ion and precipitate flotation in the aqueous HOL-PAX-XL60 S-Cu2+-CO3(2-) system gave powerful preferential removal of Cu2+ (F -100%) over the HOL-PAX-XL60 S-Cu2+ system containing no CO3(2+) ion (F approximately 86%). The role of CO3(2-) ion is also evident from decreasing the dose of PAX-XL60 S from 700 mg l(-1) to 200 mg l(-1). The other parameters, influencing the flotation process, namely: metal ion, surfactant and PAX-XL60 S concentrations, ionic strength, temperature and foreign ions were examined. Moreover, the procedure was successfully applied to recover Cu2+ ions from different volumes up to 11 and from natural water samples. PMID:16457175

  7. Diffusion coefficients of nickel chloride in aqueous solutions of lactose at T = 298.15 K and T = 310.15 K

    International Nuclear Information System (INIS)

    Binary mutual diffusion coefficients (interdiffusion coefficients) of nickel chloride in water at T = 298.15 K and T = 310.15 K, and at concentrations between (0.000 and 0.100) mol · dm-3, using a Taylor dispersion method have been measured. These data are discussed on the basis of the Onsager-Fuoss and Pikal models. The equivalent conductance at infinitesimal concentration of the nickel ion in these solutions at T = 310.15 K has been estimated using these results. Through the same technique, ternary mutual diffusion coefficients (D11, D22, D12, and D21) for aqueous solutions containing NiCl2 and lactose, at T = 298.15 K and T = 310.15 K, and at different carrier concentrations were also measured. These data permit us to have a better understanding of the structure of these systems and the thermodynamic behaviour of NiCl2 in different media.

  8. Preparation of a chitosan-based anionic exchanger for removal of bromide, chloride, iodide and phosphate ions from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Affonso Celso Gonçalves Júnior

    2014-02-01

    Full Text Available The development of a chitosan anion exchanger, obtained from shrimp shells, and its adsorption capacity for chloride, bromide, iodide and phosphate anions are provided. Dependence of exchange processes with the anions as a function of pH and contact time between exchanger and anions were initially investigated. Results showed that the best adsorption of ions occurred at pH 3.0. Exchange isotherms were then developed by the Langmuir, Freundlich and Dubinin-Radushkevich mathematical models. Results demonstrated that chitosan produced from shrimp shells may be used as feedstock in the manufacture of anion exchange microspheres.

  9. Hepatoprotective and immunomodulatory properties of aqueous extract of Curcuma longa in carbon tetra chloride intoxicated Swiss albino mice

    Institute of Scientific and Technical Information of China (English)

    Mahuya Sengupta; Gauri Dutta Sharma; Biswajit Chakraborty

    2011-01-01

    Objective: To evaluate the hepatoprotective and immunotherapeutic effects of aqueous extract of turmeric rhizome in CCl4 intoxicated Swiss albino mice. Methods: First group of mice (n=5) received CCl4 treatment at a dose of 0.5 mL/kg bw (i.p.) for 7 days. Second group was fed orally the aqueous extract of turmeric at a dose of 50 mg/kg bw for 15 days. The third group was given both the turmeric extract (for 15 days, orally) and CCl4 (for last 7 days, i.p.). The fourth group was kept as a control. To study the liver function, the transaminase enzymes (SGOT and SGPT) and bilirubin level were measured in the serum of respective groups. For assaying the immunotherapeutic action of Curcuma longa (C. longa), non specific host response parameters like morphological alteration, phagocytosis, nitric oxide release, myeloperoxidase release and intracellular killing capacity of peritoneal macrophages were studied from the respective groups. Results: The result of present study suggested that CCl4 administration increased the level of SGOT and SGPT and bilirubin level in serum. However, the aqueous extract of turmeric reduced the level of SGOT, SGPT and bilirubin in CCl4 intoxicated mice. Apart from damaging the liver system, CCl4 also reduced non specific host response parameters like morphological alteration, phagocytosis, nitric oxide release, myeloperoxidase release and intracellular killing capacity of peritoneal macrophages. Administration of aqueous extract of C. longa offered significant protection from these damaging actions of CCl4 on the non specific host response in the peritoneal macrophages of CCl4 intoxicated mice. Conclusions: In conclusion, the present study suggests that C. longa has immunotherapeutic properties along with its ability to ameliorate hepatotoxicity.

  10. Removal of lead from aqueous solution by activated carbon prepared from Enteromorpha prolifera by zinc chloride activation

    International Nuclear Information System (INIS)

    Activated carbon was prepared from Enteromorpha prolifera (EP) by zinc chloride activation. The physico-chemical properties of EP-activated carbon (EPAC) were characterized by thermal stability, zeta potential and Boehm titration methods. The examination showed that EPAC has a porous structure with a high surface area of 1688 m2/g. Batch adsorption experiments were carried out to study the effect of various parameters such as initial pH, adsorbent dosage, contact time and temperature on Pb(II) ions adsorption properties by EPAC. The kinetic studies showed that the adsorption data followed a pseudo second-order kinetic model. The isotherm analysis indicated that the adsorption data can be represented by Freundlich isotherm model. Thermodynamic studies indicated that the adsorption reaction was a spontaneous and endothermic process.

  11. Formation of La3+, Pr3+, Eu3+, Er3+, and Lu3+ complexes with chloride ions, in aqueous medium

    International Nuclear Information System (INIS)

    The constants of stability of the complexes of La3+, Pr3+, Eu3+, Er3+, and Lu3+ with Cl- ions, its were determined, in the aqueous medium of HCI - HClO4 and by a solvent extraction method. The dinonyl naphtalene sulfonic acid in n-heptane was used as extractant. The lanthanides concentration, it was measured by a VIS spectrophotometry method and by another radiochemical. The ions specific interaction theory (SIT) it was used for the extrapolation to ionic force 0 M. The results indicate that the stability constants of the LnCI2+ species diminishes when increasing the ion force and the charge density. (Author)

  12. Thermal annealing of gamma irradiated ammonium chloride (Preprint no. RC-37)

    International Nuclear Information System (INIS)

    Ammonium chloride produces N2H4+ and Cl2 as the main radiolytic products on gamma irradiation. Thermal annealing has a marked effect on the stability of N2H4+ and Cl2. During the thermal annealing the chemical yield of nitrite and iodine was studied by dissolving irradiated ammonium chloride in aqueous sodium nitrate and potassium iodide respectively. The yield of iodine in isochronal annealing showed an exponential behaviour with temperature while that of nitrite showed a decrease and then increases at higher temperatures. The results are explained on the basis of dissociation and recombination of N2H4+ with temperature. (author). 3 refs., 2 figs

  13. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R

    1991-01-01

    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  14. Automated determination of nitrate plus nitrite in aqueous samples with flow injection analysis using vanadium (III) chloride as reductant.

    Science.gov (United States)

    Wang, Shu; Lin, Kunning; Chen, Nengwang; Yuan, Dongxing; Ma, Jian

    2016-01-01

    Determination of nitrate in aqueous samples is an important analytical objective for environmental monitoring and assessment. Here we report the first automatic flow injection analysis (FIA) of nitrate (plus nitrite) using VCl3 as reductant instead of the well-known but toxic cadmium column for reducing nitrate to nitrite. The reduced nitrate plus the nitrite originally present in the sample react with the Griess reagent (sulfanilamide and N-1-naphthylethylenediamine dihydrochloride) under acidic condition. The resulting pink azo dye can be detected at 540 nm. The Griess reagent and VCl3 are used as a single mixed reagent solution to simplify the system. The various parameters of the FIA procedure including reagent composition, temperature, volume of the injection loop, and flow rate were carefully investigated and optimized via univariate experimental design. Under the optimized conditions, the linear range and detection limit of this method are 0-100 µM (R(2)=0.9995) and 0.1 µM, respectively. The targeted analytical range can be easily extended to higher concentrations by selecting alternative detection wavelengths or increasing flow rate. The FIA system provides a sample throughput of 20 h(-1), which is much higher than that of previously reported manual methods based on the same chemistry. National reference solutions and different kinds of aqueous samples were analyzed with our method as well as the cadmium column reduction method. The results from our method agree well with both the certified value and the results from the cadmium column reduction method (no significant difference with P=0.95). The spiked recovery varies from 89% to 108% for samples with different matrices, showing insignificant matrix interference in this method. PMID:26695325

  15. Micelle-Vesicle Transition by Cleavage of Disulfide Spacer Chain for Gemini Surfactant in Didodecyldimethylammonium Chloride Aqueous Solutions.

    Science.gov (United States)

    Mizuhashi, Toshinari; Asakawa, Tsuyoshi; Ohta, Akio

    2015-01-01

    We examined the "micelle-vesicle transition" through the mixing effect of single-tailed thiol surfactants produced by the cleavage of gemini surfactants, [C12H25N(CH3)2CH2CH2SSCH2CH2N(CH3)2C12H25] 2Cl (C12SSC12), which have a disulfide bond in the spacer chain. Phase diagrams of C12H25N(CH3)2CH2CH2SHCl-didodecyldimethylammonium chloride (C12SH-DDAC) and C12SSC12-DDAC were determined by conductivity and pyrene fluorescence probe methods. The aggregate diameters were evaluated by dynamic light scattering (DLS). The critical vesicle concentration (CVC) was confirmed by the abrupt increase in the intensity of light scattering with excitation at 335 nm. Vesicle formation was confined to the DDAC-rich region of the C12SSC12-DDAC system, while the vesicle formation region for the C12SH-DDAC system spread out with the addition of dithiothreitol (DTT) to C12SSC12-DDAC. This implies that single-tailed surfactants can induce a more favorable environment for molecular packing of the vesicular surface. The micelle-vesicle transition occurs with disulfide spacer chain cleavage of gemini surfactants at a particular specific concentration range. PMID:26250426

  16. The solubility of hydrous thorium(IV) oxide in chloride media: Development of an aqueous ion-interaction model

    International Nuclear Information System (INIS)

    The solubility of hydrous Th(IV) oxide was measured in NaCl solutions ranging in concentration form 0.6 to 3.0 M and in KCl at 0.6 M, over a wide range of hydrogen ion concentration (psub(cH+) 3 to 11)), and over equilibration times extending to more than one year. Our results show solubilities higher (by three to four orders of magnitude) than have been reported by other investigations in NaClO4 media. Our thermodynamic modelling calculations indicate that these differences in solubility are a result of differences in the ionic media and the ionic strength of the solutions. We have used the thermodynamic model of Pitzer and coworkers, which is valid to high ionic strengths, to analyze our data for solubility in both chloride and perchlorate media. The analysis required the use of specific ion-interaction parameters only for the bare Th4+ ion with the bulk anion Cl-. The final thermodynamic model gives a good representation of all of our solubility data in NaCl and KCl solutions below psub(cH+) of ∝ 7 as well as the solubility data in NaClO4 media and the osmotic data for ThCl4 solutions. (orig.)

  17. Analysis of potassium-40 in fertilizers containing potassium

    International Nuclear Information System (INIS)

    Remarking on gamma emitters, and making use of a pure germanium detector and a multichannel pulse-height-analyzer, analysis of natural radioactive nuclides in several fertilizers containing potassium was carried out. As the result of analyses on five samples, 228>Th, 226Ra, 235U and 40K were observed in all of the three compound-fertilizers, but no nuclide excepting 40Kwas observed in potassium chloride and potassium sulfate. 40K was fixed to be the most abundant nuclide, and the others were observed only in trace amounts. The activities of 40K in these fertilizers were nearly proportional to the contents of potassium in the samples. Contents of potassium in the fertilizers were obviously estimated from the values of 40K activities on the basis of natural abundance of 40K in potassium, and the contents estimated were in good agreement with the values determined by a chemical method

  18. Effect of the cation model on the equilibrium structure of poly-L-glutamate in aqueous sodium chloride solution

    Science.gov (United States)

    Marchand, Gabriel; Soetens, Jean-Christophe; Jacquemin, Denis; Bopp, Philippe A.

    2015-12-01

    We demonstrate that different sets of Lennard-Jones parameters proposed for the Na+ ion, in conjunction with the empirical combining rules routinely used in simulation packages, can lead to essentially different equilibrium structures for a deprotonated poly-L-glutamic acid molecule (poly-L-glutamate) dissolved in a 0.3M aqueous NaCl solution. It is, however, difficult to discriminate a priori between these model potentials; when investigating the structure of the Na+-solvation shell in bulk NaCl solution, all parameter sets lead to radial distribution functions and solvation numbers in broad agreement with the available experimental data. We do not find any such dependency of the equilibrium structure on the parameters associated with the Cl- ion. This work does not aim at recommending a particular set of parameters for any particular purpose. Instead, it stresses the model dependence of simulation results for complex systems such as biomolecules in solution and thus the difficulties if simulations are to be used for unbiased predictions, or to discriminate between contradictory experiments. However, this opens the possibility of validating a model specifically in view of analyzing experimental data believed to be reliable.

  19. Contribution to the study to the stress corrosion susceptibility of austenitic stainless steel AISI 304 in aqueous solutions containing chlorides

    International Nuclear Information System (INIS)

    The anodic behaviour of type 304 austenitic stainless steel, stressed in aqueous neutral and acid NaCl solutions, was studied. The experimental technique of the straining electrode, with constant speed and high strain rate, was applied at room temperature and at 900C. The current density on the bare metal, which is exposed to the medium during the straining the specimen, was determined at various potentials for 1N; 0,1N and 0,001N NaCl, at both temperatures, and for 1N H2SO4 + 0,1N NaCl at room temperature. In the 1N NaCl solution, tests were also carried with slightly sensitizes material at 250C and 900C. The possible crack propagation rates were estimated from these data, and parameters related with stress corrosion cracking susceptibility were analised. Potentiodynamic polarization curves were done at several potential scanning rates with and without simultaneous straining of the electrode at the same temperature, in some of the NaCl concentrations, with the aim of comparing the current values with those found in the method described above. These curves were also performed in boiling MgCl2 solutions with and without addition of NaNO3 with the purpose of compare its stress corrosion prognostic capacity in relation of that other types of tests reported. (Author)

  20. Determination of arsenate in aqueous samples by precipitation of the arsenic(V)-molybdate complex with tetraphenylphosphonium chloride and neutron activation analysis or hydride generation atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Elteren, J.T. van; Haselager, N.G.; Das, H.A. (Netherlands Energy Research Foundation, Petten (Netherlands)); Ligny, C.L. de; Agterdenbos, J. (Rijksuniversiteit Utrecht (Netherlands). Analytisch Chemisch Lab.)

    1991-11-05

    Precipitation of As(V) from aqueous samples is achieved by complexation of As(V) with molybdate followed by formation of an insoluble precipitate with tetraphenylphosphonium chloride (TPP{sup +}Cl{sup -}). The selectivity of the method was studied by investigating the behavior of other arsenic species (As(III), monomethylarsonic acid and dimethyl-arsinic acid) using {sup 73}As-labelled species. It follows that differen-tiation between As(V) and the methylated arsenic acids is excellent, but that some As(III) may precipitate. Combination with selective co-precipitation using dibenzyldithiocarbamate for preliminary As(III) removal yields accurate results when used with neutron activation analysis or hydride generation atomic absorption spectrometry. The competition of phosphate with As(V) for complexation with molybdate limits the use to samples with phosphate concentrations ,6 {mu}g ml{sup -1}. Results for some real water samples are presented. The results of both detection methods are in good agreement. (author). 18 refs.; 3 figs.; 5 tabs.

  1. Determination of arsenate in aqueous samples by precipitation of the arsenic(V)-molybdate complex with tetraphenylphosphonium chloride and neutron activation analysis or hydride generation atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Precipitation of As(V) from aqueous samples is achieved by complexation of As(V) with molybdate followed by formation of an insoluble precipitate with tetraphenylphosphonium chloride (TPP+Cl-). The selectivity of the method was studied by investigating the behavior of other arsenic species [As(III), monomethylarsonic acid and dimethyl-arsinic acid] using 73As-labelled species. It follows that differen-tiation between As(V) and the methylated arsenic acids is excellent, but that some As(III) may precipitate. Combination with selective co-precipitation using dibenzyldithiocarbamate for preliminary As(III) removal yields accurate results when used with neutron activation analysis or hydride generation atomic absorption spectrometry. The competition of phosphate with As(V) for complexation with molybdate limits the use to samples with phosphate concentrations ,6 μg ml-1. Results for some real water samples are presented. The results of both detection methods are in good agreement. (author). 18 refs.; 3 figs.; 5 tabs

  2. Diffusion coefficients of nickel chloride in aqueous solutions of lactose at T = 298.15 K and T = 310.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Ana C.F., E-mail: anacfrib@ci.uc.p [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal); Gomes, Joselaine C.S., E-mail: leidygomes18@hotmail.co [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal); Barros, Marisa C.F., E-mail: marisa.barros@gmail.co [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal); Lobo, Victor M.M., E-mail: vlobo@ci.uc.p [Department of Chemistry, University of Coimbra, 3004-535 Coimbra (Portugal); Esteso, Miguel A., E-mail: miguel.esteso@uah.e [Departamento de Quimica Fisica, Facultad de Farmacia, Universidad de Alcala, 28871, Alcala de Henares (Madrid) (Spain)

    2011-03-15

    Binary mutual diffusion coefficients (interdiffusion coefficients) of nickel chloride in water at T = 298.15 K and T = 310.15 K, and at concentrations between (0.000 and 0.100) mol {center_dot} dm{sup -3}, using a Taylor dispersion method have been measured. These data are discussed on the basis of the Onsager-Fuoss and Pikal models. The equivalent conductance at infinitesimal concentration of the nickel ion in these solutions at T = 310.15 K has been estimated using these results. Through the same technique, ternary mutual diffusion coefficients (D{sub 11}, D{sub 22}, D{sub 12}, and D{sub 21}) for aqueous solutions containing NiCl{sub 2} and lactose, at T = 298.15 K and T = 310.15 K, and at different carrier concentrations were also measured. These data permit us to have a better understanding of the structure of these systems and the thermodynamic behaviour of NiCl{sub 2} in different media.

  3. Fabrication and icing property of superhydrophilic and superhydrophobic aluminum surfaces derived from anodizing aluminum foil in a sodium chloride aqueous solution

    Science.gov (United States)

    Song, Meirong; Liu, Yuru; Cui, Shumin; Liu, Long; Yang, Min

    2013-10-01

    An aluminum foil with a rough surface was first prepared by anodic treatment in a neutral aqueous solution with the help of pitting corrosion of chlorides. First, the hydrophobic Al surface (contact angle around 79°) became superhydrophilic (contact angle smaller than 5°) after the anodizing process. Secondly, the superhydrophilic Al surface became superhydrophobic (contact angle larger than 150°) after being modified by oleic acid. Finally, the icing property of superhydrophilic, untreated, and superhydrophobic Al foils were investigated in a refrigerated cabinet at -12 °C. The mean total times to freeze a water droplet (6 μL) on the three foils were 17 s, 158 s and 1604 s, respectively. Thus, the superhydrophilic surface accelerates the icing process, while the superhydrophobic surface delays the process. The main reason for this transition might mainly result from the difference of the contact area of the water droplet with Al substrate: the increase in contact area with Al substrate will accelerate the heat conduct process, as well as the icing process; the decrease in contact area with Al substrate will delay the heat conduct process, as well as the icing process. Compared to the untreated Al foil, the contact area of the water droplet with the Al substrate was higher on superhydrophilic surface and smaller on the superhydrophobic surface, which led to the difference of the heat transfer time as well as the icing time.

  4. Solution behavior of iron(III-N,N'-ethylene-bis-(salicylideneiminato-chloride in aqueous methanol at 298.15, 303.15 and 313.15K

    Directory of Open Access Journals (Sweden)

    Brahman Dhiraj

    2014-01-01

    Full Text Available In this study partial molar volumes (φV0 and viscosity B-coefficients of iron(III-N, N'-ethylene-bis(salicylideneiminato-chloride, abbreviated as FeIII(salenCl, in different aqueous methanol solutions were determined from solution density and viscosity measurements at temperatures 298.15, 303.15, and 313.15 K under ambient pressure. Apparent molar volumes (φV and densities (ρ were used to calculate the apparent molar expansibilities (φE, the partial molar expansibilities (φE0 and the temperature dependence of the partial molar expansibilities (φE0 at constant pressure, (δφE0/δTP of FeIII(salenCl solutions to reveal the nature of different interactions in the ternary solutions. The transition state theory was applied to analyze the viscosity B-coefficients on the basis of the activation parameters of viscous flow. The overall results indicated strong solute-solvent interactions between FeIII(salenCl and the solvent molecules, preferentially with water molecules and that FeIII(salenCl acts as a net structure promoter in the ternary solutions. UV-VIS absorption spectra of the ternary solutions also stand in support of the results obtained.

  5. Durability of API class B cement pastes exposed to aqueous solutions containing chloride, sulphate and magnesium ions

    Directory of Open Access Journals (Sweden)

    Hernández, M. E.

    2008-12-01

    Full Text Available This paper discusses a durability study conducted on API class B cement, the type used in shallow oil wells, when exposed to aggressive formation water. Its resistance to the major ions, namely –SO4=, Mg+2 and Cl-–, is related both to its capacity to assimilate the aggressive action of each harmful agent and to the changes in the chemical reactivity of some of its components. The methodology used consisted in preparing and immersing cement specimens in neutral solutions containing variable concentrations of these ions to monitor the chemical reactions taking place. These solutions were analyzed and XRD studies were conducted for over a year to identify mineralogical variations. The purposes of the study were to determine the effects of joint ionic attack on this kind of cement and to monitor the variations in the calcium concentration in the aqueous solutions of Na2SO4, MgCl2 and NaCl in contact with API class B cement pastesEste trabajo se basa en el estudio de la durabilidad de un cemento API clase B, utilizado en pozos petrolíferos someros, frente a la agresividad de las aguas de formación a las que puede estar expuesto. Su eficacia frente a la exposición a los iones más importantes –SO4=, Mg+2 y Cl-– se relaciona con su capacidad de asimilar la acción agresiva de cada agente perjudicial, así como de las reacciones químicas que sufra por la reactividad de alguno de sus compuestos. La metodología aplicada supone la preparación de probetas de este cemento y su inmersión en disoluciones neutras, conteniendo los referidos iones a distintas concentraciones, para evaluar el desarrollo de las reacciones existentes en su seno. A tal fin se realizaron análisis de las disoluciones y estudios de DRX durante más de un año para conocer su evolución mineralógica. El objetivo del trabajo ha sido determinar los efectos resultantes de los ataques conjuntos de los citados iones al referido cemento; así como la observación de las

  6. Impaired homeostatic mechanism of potassium handling after acute oral potassium load in diabetes mellitus.

    OpenAIRE

    H.J. Kim; Ahn, Y. H.; Park, C H; Kang, C M; Park, H C; Bae, H. Y.; Choi, S. D.

    1993-01-01

    Chronic stable diabetic patients (n = 6) were compared with healthy control subjects (n = 5) after acute oral intake of 50 mEq of potassium chloride (KCl) to investigate for possible derangements of homeostatic responses for acute term (3 hrs) to acute potassium load. Plasma renin activity (PRA), plasma aldosterone (PA), and transtubular potassium concentration gradient (TTKG) known as a useful semiquantative index of distal nephron potassium secretion were measured. All the baseline paramete...

  7. Viscosity and density tables of sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fair, J.A.; Ozbek, H. (comps.)

    1977-04-01

    A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)

  8. Performance analysis of a triple-effect absorption cooling cycle using aqueous (lithium, potassium, sodium) nitrate solution as a working pair

    International Nuclear Information System (INIS)

    A triple-effect absorption cooling cycle using aqueous (lithium, potassium, sodium) nitrate solution (Alkitrate) as a working fluid in the high temperature stage is simulated in this work. This cycle takes advantage of the thermal potential of high temperature heat sources and has a configuration consisting of a H2O/LiBr double-effect cycle coupled with a single-effect cycle that uses Alkitrate as a working fluid. Heat is exchanged between the two cycles by thermal fluids which flow in the external circuits. The conventional working fluid H2O/LiBr suffers from serious problems of corrosion and thermal decomposition at temperatures of over 180 °C, which restricts its use in the high temperature components of a triple-effect absorption cooling cycle. At the nominal operating conditions selected, namely a heat source temperature TH of 250 °C and a cooling-water temperature TC of 30 °C the coefficient of performance achieved with the Alkitrate topping cycle is 1.73. The correct operation of the cycle is demonstrated by drawing the cycle in the Dühring diagram, where the safety margin for the crystallization of the working fluid is adhered to. Results show that the Alkitrate triple-effect cycle has a slightly higher efficiency as compared to the H2O/LiBr triple-effect cycle at generator temperatures of over 180 °C. Moreover, the practical operation of a H2O/LiBr triple-effect cycle at temperatures higher than 180 °C suffers from the above mentioned problems related to the thermal stability and corrosion of the working pair. - Highlights: • A triple-effect absorption cooling cycle using Alkitrate as a working pair is simulated for high temperature heat sources. • The cycle configuration consists of a H2O/LiBr DE cycle coupled with a SE cycle using Alkitrate as a working fluid. • The Alkitrate TE cycle has a slightly higher COP compared to H2O/LiBr TE cycle at generator temperatures of over 180 °C. • The Alkitrate triple-effect cycle represents a

  9. Potassium Iodide

    Science.gov (United States)

    Potassium iodide is used to protect the thyroid gland from taking in radioactive iodine that may be released during ... the thyroid gland. You should only take potassium iodide if there is a nuclear radiation emergency and ...

  10. DIURETIC AND ANTI-INFLAMMATORY ACTIVITY OF AQUEOUS EXTRACT OF AERVA SANGUINOLENTA (L. BLUME

    Directory of Open Access Journals (Sweden)

    Srinivas Reddy K

    2011-07-01

    Full Text Available The study was designed to evaluate the diuretic and anti-inflammatory potency of aqueous extract of whole plant of Aerva sanguinolenta in wistar albino rats. Different parameters viz. total urine volume, urine concentration of electrolytes such as sodium; potassium and chloride have been evaluated for assessment of diuretic activity. Anti-inflammatory was performed against carrageenan induced paw oedema method by using indomethacin as standard.The results revealed that the aqueous extract showed significant diuretic activity at a dose of 400 mg/kg body weigh by increasing the total volume of urine and concentration of sodium, potassium and chloride ions in urine and also extract showed significant anti-inflammatory activity.

  11. Behaviour of 29Si NMR and infrared spectra of aqueous sodium and potassium silica solutions as a function of (SiO2/M2+O) ratio

    International Nuclear Information System (INIS)

    Sodium and potassium solutions of silica with silica concentration of 1,4 mo/kg and Rms = SiO2/M+2O ratios of 4.56 to 1.6 were obtained by depolymerization of amorphous silica gel in sodium and potassium hydroxide. Solutions have been characterized by 29Si NMR and infrared spectroscopy. The results indicated that Na+ and K+ exhibit the same behaviour during the depolymerization of silica. (authors). 11 refs., 4 figs., 2 tabs

  12. Phase-transfer catalysis applied to the oxidation of nonaqueous phase trichloroethylene by potassium permanganate

    Science.gov (United States)

    Seol, Yongkoo; Schwartz, Franklin W.

    2000-07-01

    The use of potassium permanganate to oxidize chlorinated solvents has been demonstrated as an effective process for treating nonaqueous phase liquids in ground-water systems. This study evaluates the effectiveness of phase-transfer catalysts (PTCs) in enhancing the degradation rate. PTCs work by transferring permanganate ion into the nonaqueous phase where it initiates oxidative decomposition. We studied the oxidation of trichloroethylene (TCE) by potassium permanganate, conducting kinetic batch experiments in conjunction with three PTCs that varied in terms of their extraction constants and molecular structures. Using the same batch technique, we examined whether PTCs could enhance the aqueous solubility of TCE. Solubilization could also increase oxidation rates in the aqueous phase. Rates of TCE oxidation in solutions containing the PTCs and a blank were estimated separately by measuring chloride concentration and UV-Vis absorbance in the aqueous phase. The enhanced rate of TCE destruction by the PTCs was reflected by an increase in the rate of consumption of permanganate ion and production of chloride ion. There was no tendency for the PTCs, however, to solubilize TCE in the aqueous phase. Therefore, the PTCs increased the rate of TCE decomposition by catalyzing permanganate oxidation in the organic phase. This study suggests that there is significant potential for testing this scheme under field conditions.

  13. The role of radiolytically generated species in radiation-induced polymerization of vinylbenzyltrimethylammonium chloride (VBT) in aqueous solution. Steady-state and pulse radiolysis study

    International Nuclear Information System (INIS)

    Radiation-induced polymerization of vinylbenzyltrimethylammonium chloride (VBT) in aqueous solution has been investigated by steady-state and pulse radiolysis techniques. The effects of dose, dose rate, monomer concentration, pH, and ambient conditions on steady state polymerization were investigated. The reactions of primary radicals of water radiolysis, such as OH radical, e-aq, and H atom, were studied. The reactions of other chemically active species such as O.-, oxidizing radicals such as N3., Cl2.-, Br2.-, SO4.-, and a reducing specie such as CO2.- with VBT were also investigated. The reaction of VBT with OH radical and H atom were investigated by formation kinetics and by competition kinetics. The rate constant values for the reaction of OH radical with VBT were 4.7 x 109 dm3 mol-1 s-1 and 1.7 x 1010 dm3 mol-1 s-1 by formation kinetics and by competition kinetics, respectively. The results indicate that OH radicals undergo electron transfer reactions (resulting in a radical cation) and addition reactions. The hydrated electron reacts with VBT with a rate constant of 1.9 x 1010 dm3 mol-1 s-1 to form an anion. At pH ∼1, H atom reaction with VBT is diffusion controlled with a rate constant of 5.1 x 109 dm3 mol-1 s-1 as determined by formation kinetics and 1.7 x 1010 dm3 mol-1 s-1 as determined by competition kinetics. VBT radical anion reacts with VBT at a rate that is almost twice the rate at which VBT radical cation reacts with VBT, indicating anionic initiation of the polymerization of VBT. VBT undergoes very fast steady-state polymerization and dose rate; the presence of efficient radical quenchers such as oxygen and concentration of VBT in the aqueous solution affects the extent of polymerization. Typically, a dose of 4 kGy is sufficient to achieve 80-85% polymerization. The monomer solution shows a drastic increase in the viscosity of the solution, which finally gels to a soft rubbery mass. (author)

  14. Adubação antecipada na cultura da soja com superfosfato triplo e cloreto de potássio revestidos por polímeros Antecipated fertilization on soybean with triple superphosphate and potassium chloride coated with polymers

    Directory of Open Access Journals (Sweden)

    Roni Fernandes Guareschi

    2011-08-01

    Full Text Available Neste trabalho, objetivou-se comparar épocas e doses de aplicação do superfosfato triplo (SFT cloreto de potássio (KCl com e sem revestimento por polímero no desempenho produtivo da soja em condições edafoclimáticas de cerrado. O experimento foi realizado em Rio Verde, GO, em um Latossolo Vermelho distroférrico. Os tratamentos foram dispostos em delineamento de blocos ao acaso, em esquema fatorial 2x2x2+1. O primeiro fator foi constituído pelos fertilizantes SFT e KCl revestidos ou não por polímeros, o segundo por duas doses de fósforo e potássio (40 + 40 e 80 + 80 kg ha-1 P2O5 e K2O, e o terceiro, por duas épocas de aplicação dos fertilizantes (15 dias antes da semeadura e na semeadura. Inclui-se ainda, um tratamento testemunha sem adubação. Foi avaliada a produção de biomassa, a produtividade de grãos e componentes de produtividade. Houve resposta à aplicação da adubação com P e K na produção de massa fresca e produtividade, sendo a ausência de adubação prejudicial ao desenvolvimento da cultura da soja. A aplicação a lanço de superfosfato triplo e cloreto de potássio, revestidos por polímeros 15 dias antes da semeadura, proporcionou maior produção de massa seca, número de vagens por planta e produtividade de grãos de soja em relação aos fertilizantes convencionais. Quando aplicados na semeadura, os fertilizantes convencionais e fertilizantes revestidos por polímeros conferiram a mesma produção de massa seca e produtividade de grãos de soja.The objetive of this work was to compare times and application rates of triple superphosphate (TSF and potassium chloride (KCl with and without polymer coating on soybean yield performance in the cerrado environmental conditions. The experiment was conducted in Rio Verde, GO, in an Oxisol. Treatments were arranged in a randomized block design, in factorial 2x2x2+1. The first factor consisted by fertilizer TSF and KCl coated or not by polymer, the second by two

  15. Photo-Fenton oxidation of phenol and organochlorides (2,4-DCP and 2,4-D) in aqueous alkaline medium with high chloride concentration.

    Science.gov (United States)

    Luna, Airton J; Chiavone-Filho, Osvaldo; Machulek, Amilcar; de Moraes, José Ermírio F; Nascimento, Cláudio A O

    2012-11-30

    A highly concentrated aqueous saline-containing solution of phenol, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4-dichlorophenol (2,4-DCP) was treated by the photo-Fenton process in a system composed of an annular reactor with a quartz immersion well and a medium-pressure mercury lamp (450 W). The study was conducted under special conditions to minimize the costs of acidification and neutralization, which are usual steps in this type of process. Photochemical reactions were carried out to investigate the influence of some process variables such as the initial concentration of Fe(2+) ([Fe(2+)](0)) from 1.0 up to 2.5 mM, the rate in mmol of H(2)O(2) fed into the system (FH(2)O(2);in) from 3.67 up to 7.33 mmol of H(2)O(2)/min during 120 min of reaction time, and the initial pH (pH(0)) from 3.0 up to 9.0 in the presence and absence of NaCl (60.0 g/L). Although the optimum pH for the photo-Fenton process is about 3.0, this particular system performed well in experimental conditions starting at alkaline and neutral pH. The results obtained here are promising for industrial applications, particularly in view of the high concentration of chloride, a known hydroxyl radical scavenger and the main oxidant present in photo-Fenton processes. PMID:22809483

  16. Potassium chloride and rare earth elements improve plant growth and increase the frequency of the Agrobacterium tumefaciens-mediated plant transformation.

    Science.gov (United States)

    Boyko, Alex; Matsuoka, Aki; Kovalchuk, Igor

    2011-04-01

    Plant transformation efficiency depends on the ability of the transgene to successfully interact with plant host factors. Our previous work and the work of others showed that manipulation of the activity of host factors allows for increased frequency of transformation. Recently we reported that exposure of tobacco plants to increased concentrations of ammonium nitrate increases the frequency of both homologous recombination and plant transgenesis. Here we tested the influence of KCl and salts of rare earth elements, Ce and La on the efficiency of Agrobacterium-mediated plant transformation. We found that exposure to KCl, CeCl(3) and LaCl(3) leads to an increase in recombination frequency in Arabidopsis and tobacco. Plants grown in the presence of CeCl(3) and LaCl(3) had higher biomass, longer roots and greater root number. Analysis of transformation efficiency showed that exposure of tobacco plants to 50 mM KCl resulted in ~6.0-fold increase in the number of regenerated calli and transgenic plants as compared to control plants. Exposure to various concentrations of CeCl(3) showed a maximum increase of ~3.0-fold in both the number of calli and transgenic plants. Segregation analysis showed that exposure to KCl and cerium (III) chloride leads to more frequent integrations of the transgene at a single locus. Analysis of transgene intactness showed better preservation of right T-DNA border during transgene integration. Our data suggest that KCl and CeCl(3) can be effectively used to improve quantity and quality of transgene integrations. PMID:21132499

  17. Molecular dynamics simulation study of ionic hydration and ion association in dilute and 1 molal aqueous sodium chloride solutions from ambient to supercritical conditions

    Science.gov (United States)

    Driesner, T.; Seward, T. M.; Tironi, I. G.

    1998-09-01

    The increasing demand for accurate equations of state of fluids under extreme conditions and the need for a detailed microscopic picture of aqueous fluids in some areas of geochemistry (e.g., mineral dissolution/precipitation kinetics) potentially make molecular dynamics (MD) simulations a powerful tool for theoretical geochemistry. We present MD simulations of infinitely dilute and 1 molal aqueous NaCl solutions that have been carried out in order to study the systematics of hydration and ion association over a wide range of conditions from ambient to supercritical and compare them to the available experimental data. In the dilute case, the hydration number of the Na + ion remains essentially constant around 5.5 from ambient to supercritical temperatures when the density is kept constant at 1 g cm -3 but decreases to below 5 along the liquid-vapor curve. In both cases, the average ion-first shell water distance decreases by about 0.03 Å from ambient to near critical temperatures. The Cl - ion shows a slight expansion of the first hydration shell by about 0.02 Å from ambient to near critical temperatures. The geometric definition of the first hydration shell becomes ambiguous due to a shift of the position of the first minimum of the Cl-O radial distribution function. In the case of the 1 molal solution, the contraction of the Na + first hydration shell is similar to that in the dilute case whereas the hydration number decreases drastically from 4.9 to 2.8 due to strong ion association. The released waters are replaced on a near 1:1 basis by chloride ions. Polynuclear clusters as predicted by Oelkers and Helgeson (1993b) are observed in the high temperature systems. The hydration shell of the Cl --ion shows significant deviation from the behavior in dilute systems, that is, at near vapor saturated conditions, the expansion of the hydration shell is significantly larger (0.12 Å from ambient to near critical temperatures). Due to a very large shift of the first

  18. Observation of high concentration potassium chloride infusion by micro pump through peripheral vein together with fluid infusion%高浓度氯化钾经外周静脉微量泵入配合同步输液的效果评价

    Institute of Scientific and Technical Information of China (English)

    许萍

    2012-01-01

    Objective To explore the feasibility of high concentration potassium cbloride infusion by micro pump through peripheral vein together with fluid infusion.Methods 160 patients were divided into the observation group A and B (each with 40 patients) and the control group(80 patients).For the control group,only high concentration potassium chloride was infused by micro pump through peripheral vein,high concentration potassium chloride pumped through peripheral vein together with 5% sodium chloride and dextrose injection were adopted in the observation group A.High concentration potassium chloride pumped through peripheral vein together with medication liquid were adopted in the observation group B.The rate of pain and phlebitis in three groups were observed.Results The rate of pain and phlebitis decreased significantly in the observation groups compared with those of the control group.There was no significant difference in the rate of phlebitis between the observation group A and B.Conclusions High concentration potassium chloride infusion by micro pump through peripheral vein together with fluid infusion are more effective to alleviate pain,reduce the rate of phlebitis,and can change the kind and drip rate of the fluid based on the condition of the patients.%目的 探讨高浓度氯化钾经外周静脉微量泵入配合输液同步进行的可行性.方法 将160例患者分为观察A、B组各40例和对照组80例.对照组单纯经外周静脉微量泵钾,观察A组输注5%葡萄糖氯化钠配合泵钾,观察B组输注治疗性液体配合泵钾.观察对比3组患者疼痛和静脉炎的发生率.结果 观察组疼痛程度和静脉炎发生率显著低于对照组,A、B组静脉炎发生率比较差异无统计学意义.结论 高浓度氯化钾经外周静脉微量泵入配合输液同步进行可有效缓解患者局部疼痛感,减少静脉炎的发生率,而且配合泵钾的输液种类和速度可根据患者的临床情况灵活选择和掌握.

  19. Fosfato de sódio e cloreto de potássio na micropropagação de videira e amoreira-preta = Sodium phosphate and potassium chloride concentrations: micropropagation of grapevine and blackberry

    Directory of Open Access Journals (Sweden)

    Fabíola Villa

    2007-10-01

    Full Text Available Objetivou-se no presente trabalho testar diferentes concentrações de fosfato de sódio (NaH2PO4.H2O e cloreto de potássio (KCl do meio White e adicionadas ao meio Knudson, na multiplicação in vitro de videira e amoreira-preta. O meio foi constituído de sais doKnudson, acrescido de 25 g L-1 de sacarose e 6 g L-1 de ágar, e o pH ajustado para 5,8 antes da autoclavagem a 121ºC e 1 atm por 20 minutos. Os tratamentos consistiram de concentrações de NaH2PO4.H2O (0, 125, 250, 500 e 1.000 mg L-1 e de KCl (0, 125, 250, 500 e 1.000 mg L-1, em todas as combinações possíveis e do porta-enxerto de videira ‘R110’ e da amoreira-preta cv. Cherokee. Segmentos nodais, oriundos de plântulas preestabelecidas in vitro foram excisados eintroduzidos em tubos de ensaio contendo 15 mL do meio de cultura. Posteriormente, os tubos de ensaio foram transferidos para sala de crescimento a 25 ± 2ºC, irradiância de 32 mmol m–2 s–1 efotoperíodo de 16 horas diárias. O delineamento experimental foi inteiramente casualisado, utilizando-se 4 repetições com 12 plântulas cada. O experimento foi avaliado após 60 dias de cultivo in vitro e o maior comprimento da parte aérea e peso fresco de calos foram verificados em meio Knudson, na ausência de cloreto de potássio. A adição de cloreto de potássio ao meio Knudson não influenciou no aumento do comprimento da parte aérea das duas frutíferas e namassa fresca de calos do porta-enxerto de videira ‘R110’. Não é necessário adicionar fosfato de sódio ao meio para se obter maior massa fresca da parte aérea das frutíferas.This work aimed to test different concentrations of sodium phosphate (NaH2PO4.H2O and potassium chloride (KCl taken from the White medium and added to the Knudson culture medium, in the in vitro multiplication of grapevine rootstocks and blackberry. The culture medium was constituted of Knudson salts, added of 25 g L-1 of sucrose and 6 g L-1 of agar, and the adjusted pH to 5

  20. Diet, evolution and aging--the pathophysiologic effects of the post-agricultural inversion of the potassium-to-sodium and base-to-chloride ratios in the human diet.

    Science.gov (United States)

    Frassetto, L; Morris, R C; Sellmeyer, D E; Todd, K; Sebastian, A

    2001-10-01

    Theoretically, we humans should be better adapted physiologically to the diet our ancestors were exposed to during millions of years of hominid evolution than to the diet we have been eating since the agricultural revolution a mere 10,000 years ago, and since industrialization only 200 years ago. Among the many health problems resulting from this mismatch between our genetically determined nutritional requirements and our current diet, some might be a consequence in part of the deficiency of potassium alkali salts (K-base), which are amply present in the plant foods that our ancestors ate in abundance, and the exchange of those salts for sodium chloride (NaCl), which has been incorporated copiously into the contemporary diet, which at the same time is meager in K-base-rich plant foods. Deficiency of K-base in the diet increases the net systemic acid load imposed by the diet. We know that clinically-recognized chronic metabolic acidosis has deleterious effects on the body, including growth retardation in children, decreased muscle and bone mass in adults, and kidney stone formation, and that correction of acidosis can ameliorate those conditions. Is it possible that a lifetime of eating diets that deliver evolutionarily superphysiologic loads of acid to the body contribute to the decrease in bone and muscle mass, and growth hormone secretion, which occur normally with age? That is, are contemporary humans suffering from the consequences of chronic, diet-induced low-grade systemic metabolic acidosis? Our group has shown that contemporary net acid-producing diets do indeed characteristically produce a low-grade systemic metabolic acidosis in otherwise healthy adult subjects, and that the degree of acidosis increases with age, in relation to the normally occurring age-related decline in renal functional capacity. We also found that neutralization of the diet net acid load with dietary supplements of potassium bicarbonate (KHCO3) improved calcium and phosphorus balances

  1. Suplementação de cloreto de potássio para frangos de corte submetidos a estresse calórico Potassium chloride supplementation in heat stressed broilers

    Directory of Open Access Journals (Sweden)

    Sebastião Aparecido Borges

    1999-04-01

    Full Text Available O experimento foi realizado com objetivo de avaliar os efeitos do estresse calórico e da suplementação de cloreto de potássio (KCl sobre o desempenho e algumas características fisiológicas de frangos de corte. Quarenta aves, no período de 42 a 49 dias, foram submetidas ao estresse calórico (16 horas a 25 ± 1ºC; duas horas com temperatura crescente; quatro horas a 35 ± 1ºC; e duas horas com temperatura decrescente até a termoneutralidade e com umidade relativa de 63,5 ± 5%, recebendo os seguintes tratamentos: 0,50 e 1,00% KCl na ração; 0,25 e 0,50% KCl na água de bebida. A ração à base de milho e farelo de soja, com 20% de proteína bruta e 3200 kcal EM/kg, foi fornecida ad libitum. A suplementação de KCl na ração ou na água de beber não influiu no ganho de peso, nos consumos de ração e água, na conversão alimentar, na mortalidade, na relação água/ração, no teor de matéria seca das excretas e nas características hematológicas. O estresse calórico aumentou a temperatura retal, o hematócrito, a hemoglobina, o heterófilo e a relação heterófilo/linfócito e reduziu as hemácias, o linfócito, o sódio e o potássio sérico. A suplementação de KCl na água regulou o número de eritrócitos e a hemoglobina em frangos estressados pelo calor. A relação heterófilo:linfócito e a temperatura retal podem ser usadas como índices de estresse.The experiment was conducted to estimate the effect of heat stress and the potassium chloride (KCl supplementation on performance and physiological characteristics (hematological parameters, rectal temperature of broiler chicks. Forty birds, from 42 to 49 days, were submitted to heat stress (16 hours in 25 ± 1°C, two hours at increasing temperature, four hours in 35 ± 1°C and two hours at decreasing temperature until 25±1°C, with 63.5 ± 5% humidity fed the following treatments: .50 and 1.00% KCl in the diet; .25 and .50% KCl in the drinking water. Corn-soybean meal

  2. Potassium test

    Science.gov (United States)

    ... also be done if your provider suspects metabolic acidosis (for example, caused by uncontrolled diabetes) or alkalosis ( ... Hypoaldosteronism (very rare) Kidney failure Metabolic or respiratory acidosis Red blood cell destruction Too much potassium in ...

  3. Efeito da substituição de cloreto de sódio por cloreto de potássio em pão francês Effect of the substitution of sodium chloride by potassium chloride in French rolls

    Directory of Open Access Journals (Sweden)

    Ana Karoline Ferreira Ignácio

    2013-03-01

    se produzir pão francês com até 30% de redução de sal (1,4% na formulação comercial, o que proporcionaria pães com a quantidade de sódio proposta para atender aos limites estabelecidos (234 mg.50 g-1, em relação a uma formulação padrão de 2% de sal (base farinha.There is a worldwide trend to reduce sodium in industrialized food products due to its relationship with high blood pressure. Since French rolls are one of the food products most contributing towards the ingestion of sodium by the Brazilian population, the objective of this research was to evaluate the substitution of sodium chloride (NaCl by potassium chloride (KCl in this product, as a way of complying with this tendency. Four formulations were evaluated, standard (FP with 2% NaCl, the substitution of 30% (F1 and 50% (F2 of this percentage by KCl, and F3 with no sodium chloride addition, equivalent to 307, 234, 176.5 and 4.5 mg sodium per French roll (50 g, respectively. All the reductions conformed with the recommendations made by ANVISA for 2014. The wheat flour used was characterized from its proximate composition, gluten content and index and the extensigraphic and farinographic analyses, being found adequate for breadmaking. The rheological characteristics of doughs prepared with saline solutions of the same concentrations as the formulations, were obtained using the extensigraph. The rolls were evaluated for specific volume and their sodium and potassium contents, and also submitted to an acceptance test with 53 bread consumers. The reduction in sodium content did not significantly alter their specific volumes. In the sensory analysis, it was not possible to differentiate up to 30% salt reduction in relation to the 2% salt standard, for all the attributes evaluated. However the formulation with 50% substitution was significantly less accepted for taste than the standard, its average acceptance score being equivalent to "I liked it slightly". The formulation with no added sodium chloride

  4. Synthesis of high molecular weight polylactic acid from aqueous lactic acid co-catalyzed by tin(II)chloride dihydrate and succinic anhydride

    Institute of Scientific and Technical Information of China (English)

    LEI Ziqiang; BAI Yanbin; WANG Shoufeng

    2005-01-01

    Polylactic acid was synthesized from commercial available cheap aqueous lactic acid (85%―90% w/w) using succinic anhydride and SnCl2·2H2O as catalyst in the absence of organic solvents. As a result, polylactic acid with a molecular weight of 60000 was prepared in 10 h. The new procedure is much simple, cheap and outstanding in that the start material is aqueous lactic acid; the catalytic system is environmentally benign.

  5. Potassium Iodide (KI)

    Science.gov (United States)

    ... Planning Information on Specific Types of Emergencies Potassium Iodide (KI) Language: English Español (Spanish) Recommend on Facebook ... I get KI (potassium iodide)? What is Potassium Iodide (KI)? KI (potassium iodide) is a salt of ...

  6. The stability of poly(2,2′-(m-phenylene)-5,5′-bibenzimidazole) membranes in aqueous potassium hydroxide

    DEFF Research Database (Denmark)

    Aili, David; Jankova Atanasova, Katja; Li, Qingfeng; Bjerrum, Niels J.; Jensen, Jens Oluf

    2015-01-01

    In the form of membranes, poly(2,2′-(m-phenylene)-5,5′-bibenzimidazole) (mPBI) is known to exhibit high ionic conductivity when doped with aqueous KOH, which makes it interesting as electrolyte in e.g. alkaline fuel cells and water electrolyzers. The conductivity peaks at KOH concentrations aroun...... conductivity (10−4Scm−1). The preparation of a porous mPBI matrix was demonstrated as an effective approach to increase the ionic conductivity in the lower KOH concentration range, with great potential for further improvement through optimization of the porous structure.......In the form of membranes, poly(2,2′-(m-phenylene)-5,5′-bibenzimidazole) (mPBI) is known to exhibit high ionic conductivity when doped with aqueous KOH, which makes it interesting as electrolyte in e.g. alkaline fuel cells and water electrolyzers. The conductivity peaks at KOH concentrations around...... to 50wt%, and the chemical and physicochemical changes were monitored. The degradation was connected to the hydrolysis of the polymer backbone and the degradation rate increased with increasing KOH concentration. In the lower concentration range mPBI proved to be stable but exhibited low ionic...

  7. Effects of cisplatin on potassium currents in CT26 cells

    Directory of Open Access Journals (Sweden)

    Naveen Sharma

    2016-01-01

    Conclusion: Potassium currents were detected in CT26 cells and the currents were reduced by the application of tetraethylammonium (TEA chloride, iberiotoxin, a big conductance calcium-activated potassium channel blocker and barium. The potassium currents were enhanced to 192< by the application of cisplatin (0.5 mM. Moreover, the increase of potassium currents by cisplatin was further inhibited by the application of TEA confirming the action of cisplatin on potassium channels. In addition, relative current induced by cisplatin in CT26 cells was bit larger than in normal IEC-6 cells.

  8. Molten salt synthesis of potassium hexatitanate

    Science.gov (United States)

    Zaremba, T.

    2012-09-01

    Potassium hexatitanate fibrous crystals have been synthesized by a conventional solid-state reaction and via molten salt process. The molten salt process has been shown to be effective in preparing fine and non-agglomerated K2Ti6O13 whiskers. The type of molten salt (KCl, NaCl-KCl) has a significant effect on the chemical composition of the whiskers. By using a eutectic mixture of NaCl and KCl, the replacement of potassium ions in solid potassium hexatitanate by smaller sodium ions from the chloride flux can be achieved. The characterization of the samples was carried out by means of XRD, SEM, EDX and WDX.

  9. Optimization of Preparation of Activated Carbon from Ricinus communis Leaves by Microwave-Assisted Zinc Chloride Chemical Activation: Competitive Adsorption of Ni2+ Ions from Aqueous Solution

    Directory of Open Access Journals (Sweden)

    M. Makeswari

    2013-01-01

    Full Text Available The preparation of activated carbon (AC from Ricinus communis leaves was investigated in this paper. Orthogonal array experimental design method was used to optimize the preparation of AC using microwave assisted zinc chloride. Optimized parameters were radiation power of 100 W, radiation time of 8 min, concentration of zinc chloride of 30% by volume, and impregnation time of 24 h, respectively. The surface characteristics of the AC prepared under optimized conditions were examined by pHZPC, SEM-EDAX, XRD, and FTIR. Competitive adsorption of Ni2+ ions on Ricinus communis leaves by microwave assisted zinc chloride chemical activation (ZLRC present in binary and ternary mixture was compared with the single metal solution. The effects of the presence of one metal ion on the adsorption of the other metal ion were investigated. The experimental results indicated that the uptake capacity of one metal ion was reduced by the presence of the other metal ion. The extent of adsorption capacity of the binary and ternary metal ions tested on ZLRC was low (48–69% as compared to single metal ions. Comparisons with the biosorption of Ni2+ ions by the biomass of ZLRC in the binary (48.98–68.41%-~Ni-Cu and 69.76–66.29%-~Ni-Cr and ternary solution (67.32–57.07%-~Ni–Cu and Cr could lead to the conclusion that biosorption of Ni2+ ions was reduced by the influence of Cu2+ and Cr3+ ions. The equilibrium data of the adsorption was well fitted to the Langmuir isotherm. The adsorption process follows the pseudo-second-order kinetic model.

  10. Thermodynamic properties of aqueous-alcoholic solutions of sodium chloride. H2O-2-C3H7OH-NaCl

    Science.gov (United States)

    Veryaeva, E. S.; Konstantinova, N. M.; Mamontov, M. N.; Uspenskaya, I. A.

    2010-11-01

    The temperature-concentration dependences of the NaCl activity coefficient in aqueous solutions of isopropanol (propanol-2) at temperatures of 298.15 and 323.15 K (solution ionic force, 0.01 to 3 m; alcohol content, 10-60 wt %) were determined through the electromotive force method with an ion-selective electrode. A Pitzer model was used to mathematically describe the thermodynamic properties. The integral Gibbs energy of the solution formation of the H2O-2-C3H7OH-NaCl ternary system was performed according to Darken's method. The dissociation degree of salt in the investigated solutions was estimated using the literature data on the association constant of NaCl in aqueous-isopropanol solution.

  11. Potassium clavulanate

    Directory of Open Access Journals (Sweden)

    Kotaro Fujii

    2010-08-01

    Full Text Available The title salt, K+·C8H8NO5− [systematic name: potassium (2R,5R,Z-3-(2-hydroxyethylidene-7-oxo-4-oxa-1-azabicyclo[3.2.0]heptane-2-carboxylate], a widely used β-lactam antibiotic, is usually chemically unstable even in the solid state owing to its tendency to be hydrolysed. In the crystal structure, the potassium cations are arranged along the a axis, forming interactions to the carboxylate and hydroxy groups, resulting in one-dimensional ionic columns. These columns are arranged along the b axis, connected by O—H...O hydrogen bonds, forming a layer in the ab plane.

  12. Molecular structure and dynamics of an aqueous sodium chloride solution in nano-pores between portlandite surfaces: a molecular dynamics study.

    Science.gov (United States)

    Dongshuai, Hou; Zeyu, Lu; Peng, Zhang; Qingjun, Ding

    2016-01-21

    Portlandite plays an important role in the hydration phase of cement-based materials and influences the strength and durability of such materials. This study describes a molecular dynamics study of the structure and dynamics of water and ions confined at ambient temperature in calcium hydroxyl nanopores with widths of 35 Å. Strong layering of water in the vicinity of the (001) surface of portlandite demonstrates special structural features such as large density, good orientation preference, ordered interfacial organization and low diffusion rate. Due to the fixed vibration and rotation of the hydroxyl groups at the interface, water molecules within the first adsorbed layer adopt both H-downward and H-upward orientations by donating H-bonds and accepting H-bonds from the OH groups in the solid surface. Regarding the interaction of the ions and portlandite, Na(+) ions, deeply rooted in spaces in the surface hydroxyl groups, are significantly slowed and remain near the surface for long periods of time. On the other hand, due to the weak H-bonds formed by chloride ions and hydroxyl groups, adsorbed chloride ions near the surface cannot remain for longer times. In addition, when water and ions are confined in the nano-pores, the residence time for the ion-water and ion-ion clusters is lengthened so that the ion adsorption capability of the porlandite surface is enhanced due to the stable Na-Cl connections in the electrolyte solution. PMID:26687688

  13. Kinetics of CO2 Absorption by Promoted Aqueous Potassium Carbonate Solution%活化碳酸钾溶液吸收CO2的动力学研究

    Institute of Scientific and Technical Information of China (English)

    申淑锋; 冯晓霞; 赵瑞红

    2013-01-01

    化学溶剂吸收法是实现燃煤电厂烟气中CO2控制排放的有效途径之一。与有机胺溶剂相比,碳酸钾溶液吸收CO2具有溶剂成本和再生能耗等方面的优势,近年来再次受到人们的关注和重视。今在湿壁柱装置中,研究了碳酸钾溶液体系在不同浓度和不同温度下吸收CO2的速率,同时讨论了不同活化碳酸钾溶液对吸收CO2的归一化传质通量的影响。结果表明,加入1%(wt)硅酸钾可以明显提高碳酸钾溶液吸收CO2的速率,相同条件下活化后吸收CO2的归一化传质通量增加约1倍。采用快速拟一级吸收动力学模型,获得硅酸钾活化碳酸钾溶液吸收CO2的本征反应速率常数为8.35×1013exp(-6789.66/T) m3×kmol-1×s-1。%Carbon dioxide absorption using chemical solvents is one of the developed and feasible methods used to reduce CO2 emission from coal-fired power plants. Using potassium carbonate as absorbent has a number of advantages, such as solvent costs and regenerating energy consumption, over the amine based solvents, therefore it has been paid more attention in recent years. In this work, the CO2 absorption rates in unpromoted K2CO3 solution at various concentrations and temperatures were investigated in a wetted wall column and the effect of different promoters added into aqueous carbonate solution on the normalized mass-transfer flux was discussed. Results show that the addition of 1%(wt) potassium silicate into the aqueous carbonate solution could significantly enhance the CO2 absorption rate, and the normalized mass-transfer flux obtained by the promoted K2CO3 solution increases 100%during the investigated temperature range. Based on the fast pseudo-first-order reaction model, the inherent kinetic constant for reaction between potassium silicate and CO2 was obtained as 8.35×1013 exp(-6789.66/T) m3×kmol-1×s-1.

  14. Structural parameters of concentrated aqueous solutions of lithium chloride under extreme conditions from the data of integral equations method. The effect of isothermal compression

    International Nuclear Information System (INIS)

    Structure formation of aqueous solutions LiCl:nH2O (n = 3.15, 8.05, 14.90) under conditions of isothermal compression (T 523 K, P 100-1500 bar) was studied in the framework of integral equations method. It was ascertained that isothermal compression produces a weak effect on the structure of volumetric solvent in the systems considered. Irrespective of solution concentration the tetrahedral ordering of water molecules is absent in the entire range of pressures, while the number of OH bonds actually does not change. In all the solutions compression involves inessential strengthening of coordinating ability of both ions. In the context described a slight growth of the number of hydrate-separated ionic pairs and an insignificant decrease in the number of contact ionic pairs are observed

  15. 不同厂家的氯化钾缓释片三维释放特性及释放机制的考察%Study on the 3-D release characteristics of Potassium Chloride Sustained-Release Tablets from the difierent factories

    Institute of Scientific and Technical Information of China (English)

    张建国

    2011-01-01

    目的:对四个厂家生产的氯化钾缓释片进行pH、时间、释放度的考察,探讨其体外释放机制.方法:按<中国药典)(2010年版)氯化钾缓释片项下"释放度"检查法检测,描绘其三维释放图,对释放度的数据分别以零级,一级,扩散-溶蚀数学模型,Hixson-Crowell方程进行拟合.结果:四个厂家的氯化钾缓释片均以扩散-溶蚀及Hixson-Crowell 方程为最佳拟合模型,该模型释放行为基本不受pH影响.结论:四个厂家的氯化钾缓释片的体外释放机制基本相同.%Objective: To study the three-dimension (pH-time-release) release characteristics of Potassium Chloride Sustained-Release Tablets from the different factories (A, B, C, D).Methods: According to Chinese pharmacopoeia Chp (2010) dissolution method.The accumulation release percentage of Potassium Chloride Sustained-release Tables under the different pH conditions was determined by measure analysis, then the release characteristics were explored by similarity factor method, Zero grade model, First grade model, Diffusion-corrosion model and Hixson-Crowell model.Results: The release mechanisms (the curves of accumulative release) of the different factories (A, B, C, D) were accorded with the Diffusion-corrosion model and Hixson-Crowell model.Other, the release behaviors were not affected by pH.Conclusion: The four factories of the Diffusion-corrosion model and Hixson-Crowell model (curves of accumulative release) were same.

  16. Physicochemical and friccohesity study of glycine, L-alanine and L-phenylalanine with aqueous methyltrioctylammonium and cetylpyridinium chloride from T = (293.15 to 308.15) K

    International Nuclear Information System (INIS)

    Graphical abstract: Figure depicts response of amino acids towards cationic surfactants in aqueous solution at constant temperatures. Apparent isentropic compressibilities at infinite dilution (κs,ϕ0/1012 m5 · N−1 · mol−1) for amino acids are as L-Ala aq.CPC > aq.MTOAC. • Positive Vϕ0 inferred stronger solute–solvent interactions. • Glycine and L-phenylalanine transfer volumes are positive. • κs,ϕ0 of glycine and L-phenylalanine with surfactants > with water. • Weaker electrostriction produced positive Δκs,ϕ0 for glycine and L-phenylalanine. -- Abstract: Density ρ, sound velocity u, viscosity η, apparent molar volume Vϕ, isentropic compressibility κs, and apparent molar isentropic compressibility κs,ϕ of glycine, L-alanine and L-phenylalanine: (0.05 to 0.15 mol · kg−1) with water, 0.002 mol · kg−1 aqueous methyltrioctylammonium chloride (MTOAC) and cetylpyridinium chloride (CPC) are reported at T = (293.15, 298.15, 303.15 and 308.15) K. The data were regressed against composition and regression constants: apparent molar volume at infinite dilution Vϕ0, apparent molar isentropic compressibility at infinite dilution κs,ϕ0 and viscosity B-coefficient are studied. Surface tension γ and friccohesity σ data were calculated from density, pendant drop number and viscous flow time. The Vϕ0 values are found as Vϕ(gly,l-phalwithwater)0 ϕ(gly,l-phalwithsurfactatnt)0, Vϕ(l-alawithsurfactatnt)0 ϕ(l-alawithwater)0 and κs,ϕ0 values as κϕ(gly,l-phalwithwater)0 ϕ(gly,l-phalwithsurfactatnt)0, κϕ(l-alawithsurfactatnt)0 ϕ(l-alawithwater)0. Surface tension of the solvents are found as water > CPC > MTOAC. Amino acids with surfactants have produced higher friccohesity than with water whereas the friccohesityof amino acids with water and surfactants is found as L-phal > L-Ala > gly over the entire temperature range but with CPC at T = 298.15 K, the order is L-phal > gly > L-Ala. The variations in physicochemical data with temperature

  17. A double-suicide autopsy case of potassium poisoning by intravenous administration of potassium aspartate after intake of some psychopharmaceuticals.

    Science.gov (United States)

    Watanabe, K; Hasegawa, K; Suzuki, O

    2011-07-01

    We report a curious double-suicide autopsy case of both male and female who died of potassium poisoning by intravenous administration of concentrated potassium aspartate solution. The plasma concentrations of potassium of the male and female subjects were as high as 49.7 and 62.8 mEq/L, respectively. In addition to the high concentrations of potassium, toxic levels of phenobarbital, promethazine and chlorpromazine, and relatively low levels of etizolam and brotizolam were also detected from whole blood and urine specimens of both cadavers. Twenty empty plastic bottles (10-mL capacity) labeled 'ASPARA® Potassium Injection 10 mEq' were found at the suicide spot. To our knowledge, this is the first description for suicidal death by potassium aspartate; in all of the previous literature, they used potassium chloride intravenously or per os. PMID:20670988

  18. Removal of iron contaminant from zirconium chloride solution

    International Nuclear Information System (INIS)

    This patent describes a process for eliminating iron contaminant from an aqueous zirconium chloride solution that has been contaminated with FeCl3 in a plant in which zirconium and hafnium chloride solutions are separated by a main MINK solvent extraction system and the FeCl3 is normally removed from the zirconium chloride solution by a secondary MINK solvent extraction system

  19. Parallel haemodialysis and surgery saves a life after massive overdose of potassium pills

    OpenAIRE

    Nilsson, Tobias S; Malmgren, Johan; Knudsen, Kai

    2012-01-01

    Severe poisoning with potassium pills is rare but patients may present with serious cardiovascular symptoms requiring immediate and effective treatment. A 30-year-old healthy woman presented to the emergency department after ingestion of 300 slow-release pills of potassium-chloride with serum potassium of 9.5 mmol/l, and poor cardiovascular function. Gastric lavage was performed with poor outcome. Despite intensive medical treatment serum potassium remained very high around 9 mmol/l. Haemodia...

  20. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    Science.gov (United States)

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  1. 酒石酸钾钠双水相体系分离纯化C-藻蓝蛋白%Separation and purification of C-phycocyanin using aqueous two-phase extraction technique of potassium sodium tartrate

    Institute of Scientific and Technical Information of China (English)

    赵丽; 彭一良; 康天; 蔡伟民

    2015-01-01

    采用廉价的聚乙二醇(PEG)/酒石酸钾钠建立双水相体系,从干螺旋藻中分离纯化藻蓝蛋白C-PC。以纯度(目的蛋白在620 nm处的特征吸光值和总蛋白在280 nm处吸光值的比值)为指标,优化体系参数。研究结果表明,体系pH 8.06,系线长为21.65%、体积比为0.22的PEG1000和酒石酸钾钠双水相体系分离纯化效果最好,纯度由0.42提高到1.27,高于食品级纯度0.7,纯化因子3.04,回收率85.11%。硫酸铵盐析提高粗提液纯度后,二次双水相纯度达到3.28,高于药品级3.0。得到的 C-PC具有较高的生物活性。%This paper used commercial aqueous two-phase system (ATPS) to efficiently extract and purify C-PC from the dryspirulina platensis. The purity of C-PC was defined as the relation between of 620 and 280 nm ab-sorbance, which was as the target to optimize the system parameters. The optimal conditions were proved in poly-ethylene glycol (PEG) 1000 and potassium sodium tartrate, system pH of 8.06, the tie-line length (TLL) of 21.65% (w/w) and the volume ratio (Vr) of 0.22 to increase the purity from the initial purity of 0.42 to 1.27 after the first extraction. The purity was over the food grade 0.7 and the purification factor was 3.04. The recovery yield was 85.11%. The purity was achieved up 3.28 after the saturation of ammonium sulfate in the second ATPS extraction. It was more than the pharmaceutical grade 3.0.

  2. Penicillin V Potassium Oral

    Science.gov (United States)

    Penicillin V potassium is an antibiotic used to treat certain infections caused by bacteria such as pneumonia, ... Penicillin V potassium comes as a tablet and liquid to take by mouth. It is usually taken ...

  3. Potassium carbonate poisoning

    Science.gov (United States)

    Potassium carbonate is a white powder used to make soap, glass, and other items. This article discusses poisoning from swallowing or breathing in potassium carbonate. This article is for information only. Do ...

  4. Intercomparison 9711. pH, conductivity, alkalinity, nitrate + nitrite, chloride, sulfate, calcium, magnesium, sodium, potassium, total aluminium, reactive and non-labile aluminium, dissolved organic carbon, and chemical oxygen demand

    Energy Technology Data Exchange (ETDEWEB)

    Hovind, Haavard

    1997-09-22

    The work described in this report was a part of an international cooperative programme for assessment and monitoring of acidification of rivers and lakes. Two sample sets were prepared for intercomparison, one for determination of the major ions, the other for determination of aluminium fractions and unspecified organic matter. The samples were sent to 50 laboratories and 47 laboratories from 22 countries submitted results. Good agreement was found for chloride, sulfate, calcium, magnesium, sodium and the unspecific organic compounds, dissolved organic carbon and chemical oxygen demand, more than 80% being evaluated as acceptable for these analytic variables. The results for nitrate + nitrite and aluminium species did not agree well, probably because different methods were used to determine the aluminium species. On the whole, 78% of the results were within the general target accuracy of plus or minus 20%. Laboratories with results outside this accuracy should improve their methods if they want to analyse low-concentration samples. To improve the compatibility of the analytical results for aluminium fractions, it seems necessary to normalize the analytical methods and determination techniques used for these determinations. A total error of plus minus 0.2 pH units seems to be a reasonable assessment of the accuracy for pH measurements when weakly acid or neutral water samples not in CO{sub 2} equilibrium are analyzed. 7 refs., 1 fig., 34 tabs.

  5. Effect of osmolarity on potassium transport in isolated cerebral microvessels

    International Nuclear Information System (INIS)

    Potassium transport in microvessels isolated from rat brain by a technique involving density gradient centrifugation was studied in HEPES buffer solutions of varying osmolarity from 200 to 420 mosmols, containing different concentration of sodium chloride, choline chloride, or sodium nitrate. The flux of 86Rb into and out of the endothelial cells was estimated. Potassium influx was very sensitive to the osmolarity of the medium. Ouabain-insensitive K-component was reduced in hypotonic medium and was increased in medium made hypertonic with sodium chloride or mannitol. Choline chloride replacement caused a large reduction in K influx. Potassium influx was significant decrease when nitrate is substituted for chloride ion in isotonic and hypertonic media, whereas a slight decrease was found in hypotonic medium. The decrease of K influx in the ion-replacement medium is due to a decrement of the ouabain-insensitive component. Potassium efflux was unchanged in hypotonic medium but was somewhat reduced in hypertonic medium. The marked effect of medium osmolarity of K fluxes suggests that these fluxes may be responsible for the volume regulatory K movements. The possible mechanism of changes of K flux under anisotonic media is also discussed

  6. KV7 potassium channels

    DEFF Research Database (Denmark)

    Stott, Jennifer B; Jepps, Thomas Andrew; Greenwood, Iain A

    2014-01-01

    Potassium channels are key regulators of smooth muscle tone, with increases in activity resulting in hyperpolarisation of the cell membrane, which acts to oppose vasoconstriction. Several potassium channels exist within smooth muscle, but the KV7 family of voltage-gated potassium channels have been...

  7. Sodium and potassium

    International Nuclear Information System (INIS)

    Present article is devoted to sodium and potassium content in fluoride. In order to obtain the comprehensive view on sodium and potassium distribution in fluorite 892 mono mineral samples of various geologic deposits and ores of Kazakhstan, Uzbekistan, Tajikistan were analyzed. The content of sodium and potassium in fluorite of geologic deposits of various mineralogical and genetic type was defined.

  8. Diffusion behavior of chloride ions in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Div. of Building Materials

    1996-06-01

    In the present paper, an analysis of the diffusion behavior of chloride ions in concrete is presented. In concentrated electrolytic aqueous solutions such as seawater or that typically used in laboratory experiments, the effect of ionic interaction may significantly reduce the chemical potential and thus the driving force of the diffusing species. Because of different drift velocities of the cations and chloride ions in the solution, the lagging motion of the cations will also retard the drift velocity of the chlorides. In addition, both the electrical double layer forming on the solid surface and the chemical binding may significantly interfere with the transport of the chloride ions. As a result, the diffusion behavior of the chloride ions in concrete is a more complex and complicated transport process than what can be described by Fick`s law of diffusion.

  9. Enhanced dispersion stability and mobility of carboxyl-functionalized carbon nanotubes in aqueous solutions through strong hydrogen bonds

    International Nuclear Information System (INIS)

    Dispersion of carbon nanotubes has been heavily studied due to its importance for their technical applications, toxic effects, and environmental impacts. Common electrolytes, such as sodium chloride and potassium chloride, promote agglomeration of nanoparticles in aqueous solutions. On the contrary, we discovered that acetic electrolytes enhanced the dispersion of multi-walled carbon nanotubes (MWCNTs) with carboxyl functional group through the strong hydrogen bond, which was confirmed by UV–Vis spectrometry, dispersion observations and aerosolization-quantification method. When concentrations of acetate electrolytes such as ammonium acetate (CH3CO2NH4) and sodium acetate (CH3CO2Na) were lower than 0.03 mol per liter, MWCNT suspensions showed better dispersion and had higher mobility in porous media. The effects by the acetic environment are also applicable to other nanoparticles with the carboxyl functional group, which was demonstrated with polystyrene latex particles as an example

  10. Enhanced dispersion stability and mobility of carboxyl-functionalized carbon nanotubes in aqueous solutions through strong hydrogen bonds

    Energy Technology Data Exchange (ETDEWEB)

    Bahk, Yeon Kyoung; He, Xu; Gitsis, Emmanouil; Kuo, Yu-Ying [ETH Zurich, Institute of Environmental Engineering (Switzerland); Kim, Nayoung [EMPA, Building Energy Materials and Components (Switzerland); Wang, Jing, E-mail: jing.wang@ifu.baug.ethz.ch [ETH Zurich, Institute of Environmental Engineering (Switzerland)

    2015-10-15

    Dispersion of carbon nanotubes has been heavily studied due to its importance for their technical applications, toxic effects, and environmental impacts. Common electrolytes, such as sodium chloride and potassium chloride, promote agglomeration of nanoparticles in aqueous solutions. On the contrary, we discovered that acetic electrolytes enhanced the dispersion of multi-walled carbon nanotubes (MWCNTs) with carboxyl functional group through the strong hydrogen bond, which was confirmed by UV–Vis spectrometry, dispersion observations and aerosolization-quantification method. When concentrations of acetate electrolytes such as ammonium acetate (CH{sub 3}CO{sub 2}NH{sub 4}) and sodium acetate (CH{sub 3}CO{sub 2}Na) were lower than 0.03 mol per liter, MWCNT suspensions showed better dispersion and had higher mobility in porous media. The effects by the acetic environment are also applicable to other nanoparticles with the carboxyl functional group, which was demonstrated with polystyrene latex particles as an example.

  11. Effects of Cations on Corrosion of Inconel 625 in Molten Chloride Salts

    Science.gov (United States)

    Zhu, Ming; Ma, Hongfang; Wang, Mingjing; Wang, Zhihua; Sharif, Adel

    2016-04-01

    Hot corrosion of Inconel 625 in sodium chloride, potassium chloride, magnesium chloride, calcium chloride and their mixtures with different compositions is conducted at 900°C to investigate the effects of cations in chloride salts on corrosion behavior of the alloy. XRD, SEM/EDS were used to analyze the compositions, phases, and morphologies of the corrosion products. The results showed that Inconel 625 suffers more severe corrosion in alkaline earth metal chloride molten salts than alkaline metal chloride molten salts. For corrosion in mixture salts, the corrosion rate increased with increasing alkaline earth metal chloride salt content in the mixture. Cations in the chloride molten salts mainly affect the thermal and chemical properties of the salts such as vapor pressure and hydroscopicities, which can affect the basicity of the molten salt. Corrosion of Inconel 625 in alkaline earth metal chloride salts is accelerated with increasing basicity.

  12. Hydrocyanation of sulfonylimines using potassium hexacyanoferrate(II) as an eco-friendly cyanide source

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zheng; Li, Rongzhi; Zheng, Huanhuan; Wen, Fei; Li, Hongbo; Yin, Junjun; Yang, Jingya, E-mail: lizheng@nwnu.edu.cn [Key Laboratory of Eco-Environment-Related Polymer Materials for Ministry of Education, College of Chemistry and Chemical Engineering, Northwest Normal University, Gansu (China)

    2013-11-15

    An efficient and eco-friendly method for hydrocyanation of sulfonylimines via one-pot two-step procedure using potassium hexacyanoferrate)II) as cyanide source, benzoyl chloride as a promoter, and potassium carbonate as a base is described. This protocol has the features of using nontoxic, nonvolatile and inexpensive cyanide source, high yield, and simple work-up procedure. (author)

  13. Cloreto de n-(2-hidroxil propil-3-trimetil amônio quitosana como adsorvente de corantes reativos em solução aquosa Chitosan-n-2-hydroxypropyl trimethyl ammonium chloride as adsorbent for the removal of the reactive dye from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Valfredo T. Fávere

    2010-01-01

    Full Text Available The quaternary chitosan was synthesized by reaction of chitosan with glycidyl trimethylammonium chloride. it was characterized by infrared spectra and conductometric titration. Adsorption of reactive blue 4 (RB4 and reactive red 120 (RR120 by quaternary chitosan was studied from aqueous medium. Two kinetic adsorption models were tested: pseudo first-order and pseudo second-order. The experimental data best fitted the pseudo second-order model. The Langmuir isotherm model provided the best fit to the equilibrium data in the concentration range investigated and the maximum adsorption capacity determined was 415 mg (RR120 and 637 mg (RB4 of reactive dye per gram of adsorbent.

  14. Cambios en fracciones de fósforo en Inceptisoles y Mollisoles por aplicaciones de vinaza y/o cloruro de potasio Changes in fractions of phosphorus in Inceptisols and Mollisols for applications of vinasse and /or potassium chloride

    Directory of Open Access Journals (Sweden)

    Diego Iván ángel S

    2010-07-01

    to determine the effect that the vinasse application has on P fractions and their relationship to the accumulation of total biomass in sweet corn, a greenhouse experiment was performed with soils from the municipalities of Florida (Inceptisol Typic Argiudoll with intrusions Entic Dystropept and Palmira (Mollisol Fluventic Haplustoll in Valle del Cauca, Colombia. A completely randomized design with four treatments and five replications was used. The treatments were applied trying to supply the potassium requirements of growing corn and separated into two periods: 15 days after sowing and, before crop flowering. The evaluation of phosphorus fractions was performed at the beginning and end of the test, as in the time of vinasse application. The application of T1 (KCl 100% in the Florida soil showed positive effects on the inorganic fraction of available and moderately available P. The T2 (100% vinasse had no effect on phosphorus fractions. Inorganic and organic fractions of available and moderately available P increased, as did applying T2 (100% Vinasse in Mollisol. For both soils these same fractions showed high levels and significant difference between sampling indicating an adequate supply at the time of this nutrient, which is beneficial for short-cycle crops. Regarding the accumulation of biomass on sweet corn, T1 and T2 were the treatments that had higher values in Inceptisol without showing significant differences between them indicating that Vinasse can completely replace KCl. In Mollisol, T1 and T4 had the highest values of total biomass accumulation, showing that it is possible to replace 75% of synthetic fertilizer by Vinasse because did not statistics differ between them.

  15. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  16. Inorganic ion exchangers based on manganese and potassium for recovery and removal of pollutant metals of aqueous effluents; Trocadores ionicos inorganicos a base de manganes e potassio para recuperacao e remocao de metais poluentes de efluentes aquosos

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Jacinete Lima dos

    2001-07-01

    This work presents a study on the synthesis, characterization and ion exchange properties of inorganic ion exchangers based on manganese and potassium. The ion exchangers were synthesized by calcination of the mixture of manganese(II) oxalate and potassium oxalate and were characterized by granulometer distribution analysis, X-ray powder diffraction, infrared spectroscopy and scanning electron microscopic. From the data obtained in characterization it was observed that exist two distinguished groups of these materials. The first group belong to ion exchangers with up to 30% w/w potassium and the second group formed by the ion exchangers with more than 30% w / w of content of potassium in their compositions. The studies of adsorption of these materials showed that the adsorption of Cd{sup 2+} is a function of the following parameters as pH, concentration of Cd{sup 2+}, time of contact between the ion exchangers the concentration of the Cd{sup 2+} solution and the interference of other ions like Ni{sup 2+}. The great pH of adsorption for these materials occur in pH 9, the study of the influence of the cadmium concentration in the adsorption showed that for a group of exchangers the adsorption decreases with the increase of cadmium concentration and for the other group the adsorption increases with the increase of cadmium concentration. The kinetics of adsorption occur in a contact time between the ion exchangers and the Cd{sup 2+} solutions relatively short, at about 15 minutes is necessary to establish the equilibrium. The presence of Ni{sup 2+} as interfering ion decreases the adsorption of cadmium of 99,7% to 65%. These inorganic ion exchangers showed be good exchangers for Cd{sup 2+}. (author)

  17. Extração simultânea de alumínio, cálcio, magnésio, potássio e sódio do solo com solução de cloreto de amônio Simultaneous extraction of aluminum, calcium, magnesium, potassium, and sodium with ammonium chloride solution

    Directory of Open Access Journals (Sweden)

    R. C. Boeira

    2004-10-01

    Full Text Available Atualmente, alguns laboratórios de análise de solo determinam Al, Ca e Mg trocáveis em extratos de KCl 1 mol L-1 e K e Na na solução extratora Mehlich-1, também usada na extração de fósforo. Outros laboratórios, que empregam a resina trocadora de ânions para P, avaliam também Ca, Mg e K no extrato, não sendo possível determinar Al e Na. Dessa forma, achou-se oportuno avaliar a extração com NH4Cl 1 mol L-1 na determinação simultânea dos cinco cátions trocáveis: Al, Ca, Mg, K e Na, em comparação aos extratores KCl e Mehlich-1. Utilizaram-se amostras coletadas em áreas de cultivo de fruteiras irrigadas da região Nordeste e na área experimental da Embrapa Meio Ambiente em Jaguariúna (SP. Os métodos utilizados foram: (a extração simultânea dos cinco cátions com NH4Cl 1 mol L-1, e (b extração de Ca, Mg e Al com KCl 1 mol L-1, e de K e Na com o extrator Mehlich-1. A solução de NH4Cl 1 mol L-1 apresentou maior capacidade de extração de Mg do solo do que a solução de KCl 1 mol L-1; as duas soluções se equivaleram quanto à capacidade de extração de Ca e de Al. A solução de NH4Cl extraiu mais K e Na do que a solução Mehlich-1. Conclui-se que a solução de NH4Cl é uma opção conveniente para a extração de Al, Ca, Mg, K e Na trocáveis do solo.Currently, part of the soil testing laboratories of Brazil determine exchangeable Al, Ca, and Mg in a 1 mol L-1 KCl soil extract and exchangeable sodium and potassium in the Mehlich-1 soil extract, which is also used for phosphorus extraction. Other laboratories use an anion exchange resin for P and also determine Ca, Mg and K in the same extract, while Al and Na cannot be determined. For this reason, it was considered a good opportunity to evaluate the simultaneous extraction of the five exchangeable cations: Al, Ca, Mg, K, and Na in a 1 mol L-1 NH4Cl solution, and compare the results with those obtained with potassium chloride and Mehlich-1 extractants. The soil

  18. Potassium and Health123

    OpenAIRE

    Weaver, Connie M.

    2013-01-01

    Potassium was identified as a shortfall nutrient by the Dietary Guidelines for Americans 2010 Advisory Committee. The committee concluded that there was a moderate body of evidence of the association between potassium intake and blood pressure reduction in adults, which in turn influences the risk of stroke and coronary heart disease. Evidence is also accumulating of the protective effect of adequate dietary potassium on age-related bone loss and reduction of kidney stones. These benefits dep...

  19. Nitrogen fertilization efficiency with Urea ({sup 15}N) in Brachiaria brizantha cv. Marandu associated with split application of ordinary superphosphate and potassium chloride; Eficiencia da fertilizacao nitrogenada com ureia ({sup 15}N) em Brachiaria brizantha cv. Marandu associada ao parcelamento de superfosfato simples e cloreto de potassio

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, P.P.A. [EMBRAPA, Pirassununga, SP (Brazil). Centro Nacional de Pesquisa de Gado e Leite]. E-mail: ppaolive@cnpgl.embrapa.br; Trivelin, P.C.O. [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil). Lab. de Isotopos Estaveis]. E-mail: pcotrive@cena.usp.br; Oliveira, W.S. [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil). Lab. de Biologia Celular e Molecular]. E-mail: wsolivei@carpa.ciagri.usp.br

    2003-08-01

    In pastures, the evaluation of fertilization efficiency of urea-N is important since it is applied on a massive scale. Several studies report an enhancement of the fertilizers efficiency by associated applications of urea with potassium chloride (KCl) and ordinary superphosphate (OSP). In the recovery of degraded pastures or in intensive exploration systems, high quantities of KCl and OSP used as corrective fertilization are applied at the november, beginning of the rain season. Split applications of KCl and OSP could easily be associated with urea-N surface application without additional costs. An evaluation of this management was the objective of this experiment. The annual balance of {sup 15} N application with urea was obtained in treatments where OSP and/or KCl were split, top-dressed in five applications associated with urea, or when both were applied together in November. Highest forage production was obtained when OSP was split, followed by split KCl, the unique application of both together, and finally both split. The recovery of urea-N in the aerial part and the soil-pasture system remained unaltered by the treatments. However, the recovery of plant crown and root system differed among the treatments and was positively correlated with forage production. Fertilizer-N recovery in the litter was favored by splitting KCl. Even though the total recovery of the system was not improved by the treatments, splitting of KCl and OSP are indicated for an increased recovery of urea-N in numerous plant structures, resulting in a higher forage production. (author)

  20. Potassium food supplement

    Science.gov (United States)

    Bourland, C. T.; Huber, C. S.; Rambaut, C.; Heidelbaugh, N. D.

    1973-01-01

    Potassium gluconate is considered best supplementary source for potassium. Gluconate consistently received highest taste rating and was indistinguishable from nonsupplemented samples. No unfavorable side effects were found during use, and none are reported in literature. Gluconate is normal intermediary metabolite that is readily adsorbed and produces no evidence of gastrointestinal ulcerations.

  1. Penicillin V Potassium Oral

    Science.gov (United States)

    V-Cillin K® ... Penicillin V potassium is an antibiotic used to treat certain infections caused by bacteria such as pneumonia, scarlet fever, ... Penicillin V potassium comes as a tablet and liquid to take by mouth. It is usually taken every 6 ...

  2. Enthalpy and entropy interaction parameters of sodium chloride with some monosaccharides in water

    Institute of Scientific and Technical Information of China (English)

    ZHUO; Kelei; WANG; Jianji; BAI; Guangyue; YAN; Haike; WANG

    2004-01-01

    Dilution enthalpies of sodium chloride and some monosaccharides (glucose, galactose, xylose, arabinose, and fructose) in water and mixing enthalpies of aqueous sodium chloride and these monosaccharide solutions were measured by using an improved precision semimicro-titration calorimeter. Transfer enthalpies of sodium chloride from water to aqueous saccharide solutions were evaluated as well as enthalpy interaction parameters of sodium chloride with these monosaccharides in water. Combined with Gibbs energy interaction parameters, entropy interaction parameters were also obtained. The results show that interactions of the saccharides with sodium chloride depend on the stereochemistry of saccharide molecules. These interaction parameters can identify stereochemical structure of saccharide molecules.

  3. Process of attack of uraniferous ores by a solution of potassium carbonate and bicarbonate

    International Nuclear Information System (INIS)

    Oxidizing attack process of uraniferous ores by an aqueous solution of potassium carbonate and dicarbonate in which is introduced a gas containing oxygen under pressure. This process allowing a high solubilization of uranium in a soluble salt form

  4. Post-flame gas-phase sulfation of potassium chloride

    DEFF Research Database (Denmark)

    Li, Bo; Sun, Zhiwei; Li, Zhongshan;

    2013-01-01

    homogeneous systems are required to characterize the gas-phase formation of alkali sulfates. We have measured the temperature and gas-phase concentrations of KCl and HCl, and detected the presence of aerosols in the post-flame region of a range of hydrocarbon flames seeded with KCl, with and without the...... addition of SO2. Dilution of the flame products with different amounts of N2 ensured post-flame temperatures in the range 950–1400K. In the absence of SO2, KCl levels were constant in the post-flame zone and no aerosols were formed, even at the lowest temperatures. In the presence of SO2, KCl was consumed...... and HCl and aerosols formed, most pronounced in flames with the lowest post-flame temperatures. This shows that KCl is sulfated in the gas phase to K2SO4, and this is followed by homogeneous nucleation of K2SO4 to form aerosols. Predictions from a kinetic model of the S/Cl/K chemistry agreed well with...

  5. Chloride and potassium conductances of cultured human sweat ducts

    DEFF Research Database (Denmark)

    Novak, I; Pedersen, P S; Larsen, Erik Hviid

    1992-01-01

    The purpose of this study was to characterize the ion conductances, in particular those for Cl- and K+, of human sweat duct cells grown in primary culture. Sweat duct cells from healthy individuals were grown to confluence on a dialysis membrane, which was then mounted in a mini-Ussing chamber and...

  6. Lysozyme net charge and ion binding in concentrated aqueous electrolyte solutions

    Energy Technology Data Exchange (ETDEWEB)

    Kuehner, Daniel E.; Engmann, Jan; Fergg, Florian; Wernick, Meredith; Blanch, Harvey W. [Univ. of California, Berkeley, CA (United States). Dept. of Chemical Engineering; Prausnitz, John M. [Univ. of California, Berkeley, CA (United States). Dept. of Chemical Engineering

    1999-02-01

    Hydrogen-ion titrations were conducted for hen-egg-white lysozyme in solutions of potassium chloride over the range pH 2.5--11.5 and for ionic strengths to 2.0 M. The dependence of lysozyme`s net proton charge, z{sub p}, on pH and ionic strength in potassium chloride solution is measured. From the ionic-strength dependence of z{sub p}, interactions of lysozyme with potassium and chloride ions are calculated using the molecular-thermodynamic theory of Fraaije and Lyklema. Lysozyme interacts preferentially with up to 12 chloride ions at pH 2.5. The observed dependence of ion-protein interactions on pH and ionic strength is explained in terms of electric-double-layer theory. New experimental pK{sub a} data are reported for 11 amino acids in potassium chloride solutions of ionic strength to 3.0 M.

  7. Características químicas de um latossolo adubado com uréia e cloreto de potássio em ambiente protegido Chemical characteristics of an Oxisol after urea and potassium chloride fertilization in a protected environment

    Directory of Open Access Journals (Sweden)

    Maria Anita Gonçalves da Silva

    2001-09-01

    this paper was to evaluate the effects of urea and potassium chloride applications on the chemical characteristics of an Eutrorthox, mainly on its acidity and potassium saturation. The N was applied in rates of 13.3 and 39.9g m-2 and the K in rates 5.5 and 16.6 g m-2, in a fatorial (2X2+1 design, including a control. Pepper plants (Capsicum annuum, Mayata cultivar were grown under protected condition, during 34 weeks. After seedling rooting, the nutrients were applied at the rate of one sixth of the total at ten day intervals, up to 60 days. It was observed that urea did not acidify the soil probabily due to its high buffering capacity. The nitric and ammoniacal forms of N were directly effeted by the N rates applied in relation to the soil. In the treatment with N, the roots showed better development compared to the control. However, the highest K rate, applied as KCl, decreased root growth, probably due to the high soil K concentration and possible salinity effects, resulting in more than 5.0 mmol c dm-3 of K and more than 5.3% of K saturation in the exchange complex.

  8. 21 CFR 250.108 - Potassium permanganate preparations as prescription drugs.

    Science.gov (United States)

    2010-04-01

    ... tablets of potassium permanganate constitute safe dosage forms for use in self-medication. It is the... for use in self-medication are aqueous solutions containing not more than 0.04 percent potassium permanganate. Such solutions are safe for use in self-medication only by external application to the skin....

  9. Experimental and theoretical investigation of the production of HCl and some metal chlorides in magmatic/hydrothermal systems. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    Hydrothermal experiments on the partitioning of HCl and copper chloride in the system silicate melt-hydrosaline liquid-aqueous vapor are described. Modelling of the aqueous phase evolution process is discussed. (MHR)

  10. NON-AQUEOUS DISSOLUTION OF MASSIVE PLUTONIUM

    Science.gov (United States)

    Reavis, J.G.; Leary, J.A.; Walsh, K.A.

    1959-05-12

    A method is presented for obtaining non-aqueous solutions or plutonium from massive forms of the metal. In the present invention massive plutonium is added to a salt melt consisting of 10 to 40 weight per cent of sodium chloride and the balance zinc chloride. The plutonium reacts at about 800 deg C with the zinc chloride to form a salt bath of plutonium trichloride, sodium chloride, and metallic zinc. The zinc is separated from the salt melt by forcing the molten mixture through a Pyrex filter.

  11. Hg(0) absorption in potassium persulfate solution.

    Science.gov (United States)

    Ye, Qun-feng; Wang, Cheng-yun; Wang, Da-hui; Sun, Guan; Xu, Xin-hua

    2006-05-01

    The aqueous phase oxidation of gaseous elemental mercury (Hg(0)) by potassium persulfate (KPS) catalyzed by Ag(+) was investigated using a glass bubble column reactor. Concentration of gaseous mercury and potassium persulfate were measured by cold vapor atom absorption (CVAA) and ion chromatograph (IC), respectively. The effects of pH value, concentration of potassium persulfate and silver nitrate (SN), temperature, Hg(0) concentration in the reactor inlet and tertiary butanol (TBA), free radical scavenger, on the removal efficiency of Hg(0) were studied. The results showed that the removal efficiency of Hg(0) increased with increasing concentration of potassium persulfate and silver nitrate, while temperature and TBA were negatively effective. Furthermore, the removal efficiency of Hg(0) was much better in neutral solution than in both acidic and alkaline solution. But the influence of pH was almost eliminated by adding AgNO(3). High Hg(0) concentration has positive effect. The possible reaction mechanism of gaseous mercury was also discussed. PMID:16615172

  12. Safety evaluation of the aqueous extract of Leonotis leonurus shoots in rats.

    Science.gov (United States)

    Maphosa, V; Masika, Pj; Adedapo, Aa

    2008-11-01

    The aqueous extract from Leonotis leonurus (L) R.Br. (Lamiaceae) shoots was evaluated in female rats for its acute, sub acute, and chronic toxicity together with hematological, biochemical, and histopathological changes. In the acute toxicity test, the extract caused death in animals receiving 3200 mg/kg dose. The extract also caused significant (P glutamine transference gamma-glutamyl transferase (GGT), and alanine transminase in the 400 mg/kg dose in chronic toxicity. Changes were also noted in body weights, but no significant changes were observed in the levels of electrolytes (sodium, potassium, and chloride). Clinico-pathologically, starry hair coat, respiratory distress, and mortality were recorded. The extract also caused various histopathological changes in the organs. The study concluded that farmers need to exercise caution in the use of the plant for medicinal purposes. PMID:19244291

  13. Effect of application of ammonium chloride and calcium chloride on alfalfa cation-anion content and yield.

    Science.gov (United States)

    Goff, J P; Brummer, E C; Henning, S J; Doorenbos, R K; Horst, R L

    2007-11-01

    A major factor predisposing the cow to periparturient hypocalcemia, or milk fever, is being fed a prepartum ration with a high dietary cation-anion difference (DCAD). The DCAD can be favorably altered to prevent milk fever by decreasing K and Na or increasing Cl and S in forages for cows in late gestation. The objective of this study was to test the hypothesis that application of Cl to alfalfa could increase Cl in forage, thereby lowering DCAD. We conducted a field experiment at 2 Iowa locations in which established plots of alfalfa were treated in April 2001 with 0, 56, 112, or 168 kg of Cl/ha using ammonium chloride, calcium chloride, or a mix of the 2 sources with equal amounts of chloride coming from each source. Plots were harvested 4 times in 2001 and once in 2002 and plant tissue analyzed for mineral composition. Applying chloride from either source once in the spring resulted in increased plant chloride content over all 4 cuttings for that year. Averaged across both locations, chloride levels were elevated from 0.52% in control plots to 0.77, 0.87, and 0.89% Cl in plots treated with 56, 112, and 168 kg of Cl/ha, respectively. Chloride application had no effect on plant potassium, sodium, calcium, magnesium, or phosphorus. These results suggest chloride application can elevate chloride content and lower DCAD values of alfalfa, and also maintain crop yield. PMID:17954756

  14. Partial replacement of sodium chloride in Italian salami and the influence on the sensory properties and texture

    Directory of Open Access Journals (Sweden)

    Claudia Fieira

    2015-05-01

    Full Text Available Cured meat products, such as Italian salami, exhibit high levels of sodium from NaCl, added to ensure flavor and texture. Studies indicates a close relationship between the consumption of these products and hypertension and cardiovascular diseases. The objective of this study was to evaluate the effect of partial replacement of sodium chloride by potassium chloride, magnesium chloride, and calcium chloride on the texture and sensory attributes of Italian salami and to quantify the levels of minerals in the finished product. Four formulations were prepared: without a starter culture (F1; with a starter culture (F2; partial replacement of 60% sodium chloride by  potassium chloride (F3; and partial replacement of sodium chloride by a mixture containing potassium chloride,  magnesium chloride, and calcium chloride (F4. Analyses of Na+, K+, Ca+2 and Mg+2 contents, texture profile and sensory attributes (acceptance test were carried out. Formulations F1, F2, F3 and F4 presented levels of Na+ 0.53, 0.44, 0.36 and 0.30, respectively. The formulations presented a reduction in the sodium chloride content over 25%, thus complying with the requirements of the current legislation. The addition of these salts affected certain important sensory attributes, such as flavor and global impression, and increased hardness and chewiness values.

  15. Efeitos da solução salina hipertônica a 7,5% em glicose a 5% nas concentrações séricas de sódio, cloreto e potássio de eqüinos com hipovolemia induzida Effects of 7,5% hypertonic saline in 5% glucose on serum levels of sodium, chloride and potassium in induced hypovolemic horses

    Directory of Open Access Journals (Sweden)

    A.I. Bordin

    2007-06-01

    Full Text Available Estudaram-se os efeitos de soluções salinas isotônica e hipertônica em eqüinos hipovolêmicos sobre as concentrações séricas de sódio, cloreto e potássio e freqüências cardíaca (FC e respiratória (FR. Quinze eqüinos machos com peso entre 390 e 475kg e idades entre quatro e 18 anos foram submetidos à retirada de sangue correspondente a 2% do peso corporal e distribuídos em três grupos de igual número: o grupo GSH recebeu solução hipertônica de NaCl a 7,5% em glicose a 5%; o GSI, solução isotônica de NaCl a 0,9%; e o GC não foi tratado. Os eletrólitos séricos foram avaliados antes (T0, após a retirada de sangue (T1 e após a infusão das soluções, entre 20 e 30 minutos (T2, entre 60 e 70 minutos (T3 e entre 120 e 130 minutos (T4. Após T0, houve elevação da FC e da FR, e as concentrações séricas de Na, Cl, K permaneceram inalteradas. Após a infusão, houve melhora das variáveis clínicas em GSI e GSH, em relação ao GC. Quanto a T3 e T4, os valores de Na em T2 do GSH foram maiores, e os de Cl e de K não se alteraram. As soluções hipertônica e isotônica são seguras na correção da hipovolemia induzida e não produzem alteração eletrolítica significativa.The effect of isotonic and hypertonic solutions on serum levels of sodium, chloride and potassium and cardiac (CR and respiratory rates (RR of hypovolemic horses were studied. Fifteen horses weighting from 390 to 475kg, aging from four to 18-years-old were submitted to bleeding of 2% of body weight and divided in three groups: 7.5% NaCl hypertonic saline in 5% glucose (GSH, 0.9% NaCl isotonic saline and control group (GC. Serum electrolytes were evaluated before (T0 and after bleeding (T1 and after the administration of the solutions between 20 and 30 minutes (T2, 60 and 70 minutes (T3 and 120 and 130 minutes (T4. After T0, CR and RR increased while serum sodium, chloride, potassium were not affected. After the treatment, the clinical variables

  16. Enhancement of visible-light photocatalytic activity of Pt supported potassium niobate (Pt-KNbO3) by up-conversion luminescence agent (Er3+:Y3Al5O12) for hydrogen evolution from aqueous methanol solution

    International Nuclear Information System (INIS)

    In this paper, a high effective up-conversion luminescence agent (Er3+:Y3Al5O12) is synthesized by sol–gel method, and then its corresponding visible-light photocatalysts (Er3+:Y3Al5O12/Pt-KNbO3) are successfully prepared by hydrothermal and direct mixing methods. For comparison, Er3+:Y3Al5O12, Pt-KNbO3 and Er3+:Y3Al5O12/Pt-KNbO3 are all characterized by XRD (X-ray diffractometer), SEM(scanning electron microscopy) and EDX(energy dispersive X-ray spectroscopy ). At first, the visible-light photocatalytic activity of Er3+:Y3Al5O12/Pt-KNbO3 is examined through photocatalytic hydrogen evolution from aqueous methanol solution under visible-light irradiation. Lastly, the influence factors such as Er3+:Y3Al5O12 and Pt-KNbO3 mass ratio, heat-treated temperature and initial pH value on the visible-light photocatalytic hydrogen evolution activity of Er3+:Y3Al5O12/Pt-KNbO3 are studied. Particularly, Er3+:Y3Al5O12/Pt-KNbO3 catalysts with 0.5:1.0 mass ratio heat-treated at 500 °C in aqueous methanol solution with initial pH = 6.0 show the highest photocatalytic activity in hydrogen evolution from aqueous methanol solution. - Highlights: • The novel visible-light H2 evolution photocatalysts (Er3+:Y3Al5O12/Pt-KNbO3) were prepared. • Er3+:Y3Al5O12/Pt-KNbO3 can effectively perform visible-light photocatalytic H2 evolution from methanol splitting. • A visible-light photocatalytic H2 evolution process of Er3+:Y3Al5O12/Pt-KNbO3 was presented

  17. High Temperature Stability of Potassium Beta Alumina

    Science.gov (United States)

    Williams, R. M.; Kisor, A.; Ryan, M. A.

    1996-01-01

    None. From Objectives section: Evaluate the stability of potassium beta alumina under potassium AMTEC operating conditions. Evaluate the stability regime in which potassium beta alumina can be fabricated.

  18. 乙醇-硫酸铵双水相萃取镉-碘化钾-罗丹明B离子缔合物%Extraction of cadmium-potassium iodide-rhodamine B ion association complex by alcohol-ammonium sulfate aqueous two-phase

    Institute of Scientific and Technical Information of China (English)

    曾云; 覃事栋; 姚康康; 王影; 肖苗

    2012-01-01

    In the presence of ammonium sulphate, the extraction behavior of Cd (Ⅱ) based on potassium iodide-Rhodamine B-alcohol system was studied and the optimal condition of phase separation was selected. Results showed that in the pH1 ~3 media, the extraction rate of [CdI4]2- by alcohol-ammonium sulfate aqueous two-phase system is only 35.5% , and the ion association complex, which is formed by adding rhodamine B, can be extracted completely by the aqueous two-phase system. In the system, Cd2+ can be dissociated completely from Zn2+, Fe3+, Co2+, Cu2+, and Ni2+.%研究了在( NH4) 2SO4存在下,碘化钾-罗丹明B-乙醇体系萃取Cd(Ⅱ)的行为及最佳分相条件.实验表明,在pH 1~3时,乙醇-( NH4 )2SO4双水相体系对[ CdI4]2-络阴离子的萃取率只有35.5%;加入罗丹明B后,该体系能完全萃取镉-碘化钾-罗丹明B形成的离子缔合物,而干扰离子Zn2+、Fe3+、Co2+、Cu2+、Ni2+不被萃取,实现Cd2+与上述离子的分离.

  19. Experimental pain in human temporal muscle induced by hypertonic saline, potassium and acidity

    DEFF Research Database (Denmark)

    Jensen, K; Norup, M

    1992-01-01

    The study was aimed at developing a reference model for experimental pain and tenderness in the human temporal muscle by the local injection of hypertonic saline, potassium chloride and acidic phosphate buffer, using isotonic saline as control. The design was randomized and double-blind. Twenty...... healthy subjects had 0.2 ml test solution injected into one temporal muscle and saline into the other. Following each injection, pain was rated on a 10-point ordinal scale and pressure-pain thresholds were measured every minute for 10 min by a pressure algometer. Hypertonic saline (n = 11) and potassium...... chloride (n = 12) induced significantly more pain than isotonic saline (ANOVA, p less than 0.0001). Compared to control injections, hypertonic saline and potassium chloride induced a significant reduction in pressure-pain threshold (ANOVA, p less than 0.0001 and p less than 0.05). Forty-eight percent of...

  20. Effect of potassium-salt muds on gamma ray, and spontaneous potential measurements

    International Nuclear Information System (INIS)

    Interpretations of the gamma ray and Spontaneous Potential curves generally assume the presence of sodium chloride as the dominant salt in both the formation water and the mud filtrate. However, potassium-salt muds are increasingly being used by the oil industry. The potassium cation is significantly different from the sodium cation in its radioactive and electrochemical properties. Natural potassium contains a radioactive isotope which emits gamma rays. Thus, the presence of potassium salts in the mud system may contribute to Gamma-Ray tool response. Since the Gamma Ray is used quantitatively in many geological sequences as an indicator of clay content, a way to correct for the effect of potassium in the mud column is desirable. Correction methods and charts based on laboratory measurements and field observations are presented. The effect of temperature on the resistivity of potassium muds is also briefly discussed. From data available, it appears to be similar to that for NaCl muds. On the bases of field observations and laboratory work, the electrochemical properties of potassium-chloride and potassium-carbonate muds and mud filtrates are discussed. Activity relationships are proposed, and the influence of these salts on the SP component potentials--namely, the liquid-junction, membrane, and bi-ionic potentials--is described. Several field examples are presented

  1. Carbon dioxide solubility in aqueous solutions of sodium chloride at geological conditions: Experimental results at 323.15, 373.15, and 423.15 K and 150 bar and modeling up to 573.15 K and 2000 bar

    Science.gov (United States)

    Zhao, Haining; Fedkin, Mark V.; Dilmore, Robert M.; Lvov, Serguei N.

    2015-01-01

    A new experimental system was designed to measure the solubility of CO2 at pressures and temperatures (150 bar, 323.15-423.15 K) relevant to geologic CO2 sequestration. At 150 bar, new CO2 solubility data in the aqueous phase were obtained at 323.15, 373.15, and 423.15 K from 0 to 6 mol kg-1 NaCl(aq) for the CO2-NaCl-H2O system. A γ - φ (activity coefficient - fugacity coefficient) type thermodynamic model is presented for the calculation of both the solubility of CO2 in the aqueous phase and the solubility of H2O in the CO2-rich phase for the CO2-NaCl-H2O system. Validation of the model calculations against literature data and other models (MZLL2013, AD2010, SP2010, DS2006, and OLI) show that the proposed model is capable of predicting the solubility of CO2 in the aqueous phase for the CO2-H2O and CO2-NaCl-H2O systems with a high degree of accuracy (AAD response to increased temperature. A link of web-based CO2 solubility computational tool can be provided by sending a message to Haining Zhao at hzz5047@gmail.com.

  2. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents the state-of-the art: an analytical model which describes chloride profiles in concrete as function of depth and...... makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  3. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...... marine atmospheric and submersed South Scandinavian environment. The design parameters are based on sequential measurements of 86 chloride profiles taken over ten years from 13 different types of concrete. The design parameters provide the input for an analytical model for chloride profiles as function...

  4. Chemical and electrochemical properties in the molten lithium chloride-potassium chloride eutectic

    International Nuclear Information System (INIS)

    We have studied the behaviour of several chemical species in the molten LiCI-KCI eutectic. The solubility of certain oxides and sulphides has made it possible for us to show the existence of O2- and S2- ions. We have been able to show the existence of a certain number of chemical reactions: oxido-reduction precipitation, complex formation; we have studied, amongst others, the oxidation of O2- and of S2-. (author)

  5. [Determination of potassium in sodium by flame atomic emission spectroscopy].

    Science.gov (United States)

    Xie, C; Wen, X; Jia, Y; Sun, S

    2001-06-01

    Sodium is used as a coolant in China experiment fast reactor (CEFR). Potassium in sodium has an influence on heat property of reactor. A analytical method has been developed to determinate potassium in sodium by flame atomic emission spectroscopy. Sodium sample is dissolved by ultrasonic humidifier. The working conditions of the instrument and inTerferences from matrix sodium, acid effect and concomitant elements have been studied. Standard addition experiments are carried out with potassium chloride. The percentage recoveries are 94.7%-109.8%. The relative standard deviation is 4.2%. The analytical range accords with sodium quality control standard of CFFR. The precision corresponds to the international analytical method in sodium coolant reactor. PMID:12947670

  6. Dechlorination, dissolution and purification of weapon grade plutonium oxide contaminated with chlorides: tests performed in the CEA Atalante Facility for the aqueous polishing part of MOX Fuel Fabrication Facility

    International Nuclear Information System (INIS)

    During the first two to three years of operation, the MOX Fuel Fabrication Facility (MFFF) designed by Duke Cogema Stone and Webster (DCS) will receive and process low grade plutonium oxide from alternate feedstock (AFS). Some of this feedstock does not meet the specifications of material normally processed by MFFF, high grade plutonium oxide from the Pit Disassembly and Conversion Facility (PDCF). To validate the process selection and design parameters, DCS has requested the CEA (Acronym for French Atomic Energy Commission) to perform laboratory scale active tests using with weapons grade Plutonium oxide contaminated with chloride and other metallic impurities. Dechlorination, silver(II) dissolution and purification active tests have been performed in CEA Atalante Facility at Marcoule France with the same process parameters than the MFFF design parameters. The aim of this paper is to present the feed characteristics, the tests conditions and the tests results. (authors)

  7. Inhibitory actions of GABA on rabbit urinary bladder muscle strips: mediation by potassium channels.

    Science.gov (United States)

    Ferguson, D R; Marchant, J S

    1995-05-01

    1. The actions of gamma-aminobutyric acid (GABA) upon rabbit urinary bladder muscle were investigated to determine whether they were mediated through potassium channels. 2. In vitro experiments were undertaken in which bladder muscle strips were caused to contract with carbachol. Addition of GABA or baclofen reduced the size of such evoked contractions in the case of GABA by 20.7 +/- 3.2%, in the case of baclofen by 22.4 +/- 2.2%. 3. Electrical stimulation of autonomic nerves in bladder wall strips also evoked contractions which were significantly smaller in potassium-free Krebs solution. The size of contractions produced by carbachol on the other hand were unaffected by the absence of potassium in the Krebs solution. 4. The inhibitory actions of GABA and baclofen on carbachol-induced contractions of bladder muscle were detected at much lower concentrations in potassium-free compared with potassium containing solutions. 5. The inhibitory effects of baclofen were completely reversed by tetraethyl ammonium chloride between 1 and 5 mM, caesium chloride between 0.5 and 3 mM and barium chloride between 0.5 and 2.5 mM. The actions of baclofen were only partially reversed by 4-amino-pyridine between 1 and 5 mM. 6. It was concluded that the GABAB receptor-mediated inhibitory actions on rabbit urinary bladder smooth muscle cells were produced by activation of potassium channels. PMID:7647988

  8. Analysis of the effects of calcium or magnesium on voltage-clamp currents in perfused squid axons bathed in solutions of high potassium.

    Science.gov (United States)

    Rojas, E; Taylor, R E; Atwater, I; Bezanilla, F

    1969-10-01

    Isolated axons from the squid, Dosidicus gigas, were internally perfused with potassium fluoride solutions. Membrane currents were measured following step changes of membrane potential in a voltage-clamp arrangement with external isosmotic solution changes in the order: potassium-free artificial seawater; potassium chloride; potassium chloride containing 10, 25, 40 or 50, mM calcium or magnesium; and potassium-free artificial seawater. The following results suggest that the currents measured under voltage clamp with potassium outside and inside can be separated into two components and that one of them, the predominant one, is carried through the potassium system. (a) Outward currents in isosmotic potassium were strongly and reversibly reduced by tetraethylammonium chloride. (b) Without calcium or magnesium a progressive increase in the nontime-dependent component of the currents (leakage) occurred. (c) The restoration of calcium or magnesium within 15-30 min decreases this leakage. (d) With 50 mM divalent ions the steady-state current-voltage curve was nonlinear with negative resistance as observed in intact axons in isosmotic potassium. (e) The time-dependent components of the membrane currents were not clearly affected by calcium or magnesium. These results show a strong dependence of the leakage currents on external calcium or magnesium concentration but provide no support for the involvement of calcium or magnesium in the kinetics of the potassium system. PMID:5823216

  9. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...

  10. Predominance diagrams of uranium and plutonum species in both lithium chloride-potassium chloride eutectic and calcium chloride

    OpenAIRE

    Brown, L. D.; Abdulaziz, R.; Simons, S; Inman, D.; Brett, D.J.L.; Shearing, P. R.

    2013-01-01

    Electro-reduction of spent nuclear fuel has the potential to significantly reduce the amount of high level waste from nuclear reactors. Typically, spent uranium and plutonium are recovered via the PUREX process leading to a weapons-grade recovery; however, electro-reduction would allow spent nuclear fuel to be recovered effectively whilst maintaining proliferation resistance. Here, we pres- ent predominance diagrams (also known as Littlewood diagrams) for both uranium ...

  11. Suicide Attempt by Intravenous Potassium Self-Poisoning: A Case Report

    OpenAIRE

    Florent Battefort; Emilie Dehours; Baptiste Vallé; Ahmed Hamdaoui; Vincent Bounes; Jean-Louis Ducassé

    2012-01-01

    Introduction. Overdose of potassium is not as frequently encountered in clinical practice as hyperkalaemia due to acute or chronic renal disease. However, potassium overdoses leading to serious consequences do occur. Case Presentation. A 20-year-old nurse student presented with a cardiac arrest with asystole rhythm. Beside the patient were found four 50-mL syringes and empty vials of potassium chloride (20 mL, 10%). After initial resuscitation with epinephrine, 125 mL of a 4.2% intravenous so...

  12. Feasibility and antihypertensive effect of replacing regular salt with mineral salt -rich in magnesium and potassium- in subjects with mildly elevated blood pressure

    OpenAIRE

    Sarkkinen Essi S; Kastarinen Mika J; Niskanen Tarja H; Karjalainen Pia H; Venäläinen Taisa M; Udani Jay K; Niskanen Leo K

    2011-01-01

    Abstract Background High salt intake is linked to hypertension whereas a restriction of dietary salt lowers blood pressure (BP). Substituting potassium and/or magnesium salts for sodium chloride (NaCl) may enhance the feasibility of salt restriction and lower blood pressure beyond the sodium reduction alone. The aim of this study was to determine the feasibility and effect on blood pressure of replacing NaCl (Regular salt) with a novel mineral salt [50% sodium chloride and rich in potassium c...

  13. Secretion by the nasal salt glands of two insectivorous lizard species is initiated by an ecologically relevant dietary ion, chloride.

    Science.gov (United States)

    Hazard, Lisa C; Lechuga, Claudia; Zilinskis, Stephanie

    2010-08-01

    Salt glands are used by some vertebrates to excrete hyperosmotic NaCl or KCl solutions in response to dietary salt loads. Control of secretion varies across taxa; some secrete in response to osmotic challenges while others secrete in response to specific dietary ions. We hypothesized that differences in control could be related to different diet-related selective pressures on herbivorous, marine, and insectivorous species. We studied control of secretion and flexibility of cation (sodium or potassium) and anion (chloride or bicarbonate) secretion in two insectivorous lizard species, Schneider's skinks (Eumeces schneideri, Scincidae) and green anoles (Anolis carolinensis, Polychrotidae). Lizards were injected daily for four days with combinations of cations (potassium, sodium, and histidine control) and anions (chloride and acetate control), isoosmotic saline, or sham injection. Secretions were collected daily and analyzed for sodium, potassium, and chloride. Both species secreted only in response to chloride; sodium appeared to have a slight inhibitory effect. Regardless of cation load, skinks secreted a combination of potassium and sodium, while anoles secreted solely potassium. In both species, total cation secretion was matched closely by chloride; very little bicarbonate was secreted. As predicted, secretion in insectivorous lizards was initiated by the dietary ion ecologically most important for these species, chloride, which otherwise cannot be excreted without significant water loss (unlike the cations, which may be excreted as insoluble urate salts). This gives further support to the hypothesis that ecological factors drive the evolution of control mechanisms in lizard salt glands. PMID:20623801

  14. Preparation of Potassium Ferrate from Spent Steel Pickling Liquid

    Directory of Open Access Journals (Sweden)

    Yu-Ling Wei

    2015-09-01

    Full Text Available Potassium ferrate (K2FeO4 is a multi-functional green reagent for water treatment with considerable combined effectiveness in oxidization, disinfection, coagulation, sterilization, adsorption, and deodorization, producing environment friendly Fe(III end-products during the reactions. This study uses a simple method to lower Fe(VI preparation cost by recycling iron from a spent steel pickling liquid as an iron source for preparing potassium ferrate with a wet oxidation method. The recycled iron is in powder form of ferrous (93% and ferric chlorides (7%, as determined by X-ray Absorption Near Edge Spectrum (XANES simulation. The synthesis method involves three steps, namely, oxidation of ferrous/ferric ions to form ferrate with NaOCl under alkaline conditions, substitution of sodium with potassium to form potassium ferrate, and continuously washing impurities with various organic solvents off the in-house ferrate. Characterization of the in-house product with various instruments, such as scanning electron microscopy (SEM, ultraviolet-visible (UV-Vis, X-ray diffraction (XRD, and X-ray absorption spectroscopy (XAS, proves that product quality and purity are comparative to a commercialized one. Methylene blue (MB de-colorization tests with in-house potassium ferrate shows that, within 30 min, almost all MB molecules are de-colorized at a Fe/carbon mole ratio of 2/1.

  15. Conductometric study of lanthanum chloride interaction with potash soaps of higher fatty acids

    International Nuclear Information System (INIS)

    Interaction of lanthanum chloride with potassium salts of higher aliphatic acids, containing from 10 to 16 carbon atoms, at room temperature in weakly acid media (pH=5.5) gives rise to neutral soaps of the La[CHsub(3)(CHsub(2))sub(n)COO]sub(3) composition, while in alkaline media (pH=8.0) base soaps of the LaOH[CHsub(3)(CHsub(2))sub(n)COO]sub(2) composition are formed. In acid solutions (pH=2.0) no interaction of lanthanum chloride with potassium soaps of the above carboxylic acids is observed

  16. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  17. PREPARED POTASSIUM SALT OF CARBOXYMETHYL PINE WOOD IN A MICROWAVE

    Directory of Open Access Journals (Sweden)

    Вадим Иванович Маркин

    2013-10-01

    Full Text Available Microwave radiation to intensify the process of carboxymethylation of pine wood without prior separation of the individual components is proposed to use . Carboxymethylated pine wood in the form of the potassium salt obtained by treating the pine potassium hydroxide and monochloroacetic acid in 2-propanol . Composition and properties of the products were investigated . Carboxymethylcellulose isolated from carboxymethylated pine wood. Increasing the power of microwave radiation (210 to 700 W and the duration of the first and second stages of the process of carboxymethylation (20-30 sec increases the content of carboxymethyl groups (18,3-25,6 %. Abnormally low solubility of the potassium salts of carboxymethylated pine wood (10–18% compared to the sodium salt with a comparable content of carboxymethyl groups was detected. Study viscosity of aqueous solutions carboxymethylated pine and carboxymethylcellulose derived from it was performed. It is shown that the samples obtained at microwave power of 210 W have abnormal flow curves.

  18. Potassium toxicity at low serum potassium levels with refeeding syndrome.

    Science.gov (United States)

    Vemula, Praveen; Abela, Oliver G; Narisetty, Keerthy; Rhine, David; Abela, George S

    2015-01-01

    Refeeding syndrome is a life-threatening condition occurring in severely malnourished patients after initiating feeding. Severe hypophosphatemia with reduced adenosine triphosphate production has been implicated, but little data are available regarding electrolyte abnormalities. In this case, we report electrocardiographic changes consistent with hyperkalemia during potassium replacement after a serum level increase from 1.9 to 2.9 mEq/L. This was reversed by lowering serum potassium back to 2.0 mEq/L. In conclusion, the patient with prolonged malnutrition became adapted to low potassium levels and developed potassium toxicity with replacement. PMID:25456880

  19. Reaction of uranium dioxide with copper-containing chloride melts

    International Nuclear Information System (INIS)

    Cermet composition materials consisting of metallic copper and uranium dioxide can be used for manufacturing fuel rods of nuclear power reactors. Reprocessing of such irradiated fuel of dispersive type can be done employing non-aqueous pyrochemical methods and developing such technology requires information on interaction of uranium dioxide with chloride melts containing copper ions

  20. A chronopotentiometric approach for measuring chloride ion concentration

    NARCIS (Netherlands)

    Abbas, Yawar; Olthuis, Wouter; Berg, van den Albert

    2013-01-01

    In this paper, a novel approach is reported for the electrochemical measurement of chloride ions in aqueous solution. This sensor is based on the stimulus/response principle of chronopotentiometry. A current pulse is applied at the Ag/AgCl working electrode and the potential change is measured with

  1. Determination of the constants of the solubility product of Ln(OH)3 and the effect of the chloride ions on the lanthanum hydrolysis, praseodymium and lutetium in aqueous solutions of ion force 2 Molar

    International Nuclear Information System (INIS)

    The behavior of lanthanum (III), praseodymium (III), and lutetium (III) was studied in 2 M NaClO4 (aq) and 2 M NaCl (aq) at 303 K and free -CO2 conditions. Solubility diagrams (p Ln(aq)-pCH) were obtained by means of a radiochemical method. The pCH borderlines of saturation and unsaturation zones of the solutions and solubility product constants for Ln(OH)3 were determined from these diagrams. The fitting of the solubility equation to the experimental values of p Ln(aq)-pCH diagrams allowed the calculation of the first hydrolysis and solubility product constants. Independently, the stability constants for the first species of hydrolysis were determined by means of pH titrations, the data were treated with the program SUPERQUAD and fitted to the mean ligand number equation. The stability constants for the species LnCl2+ were as well calculated in 2M ionic strength and 303 K from the hydrolysis constant values obtained in both perchlorate and chloride media. The values obtained for La, Pr and Lu were: logKps: 21.11 ± 0.09, 19.81 ± 0.11 and 18.10 ± 0.13 in 2M NaClO4; logKps: 22.22 ± 0.09, 21.45 ± 0.14 and 18.52 ± 0.29 in 2M NaCl; log β1: - 8.64 ± 0.02, - 8.37 ± 0.01 and - 7.95 ± 0.11 in 2M NaClO4; log β1/ : - 9.02 ± 0.11, - 8.75 ± 0.01 and - 8.12 ± 0.03 in 2M NaCl and the values for log β1,Cl were - 0.0255, - 0.155 and - 0.758, respectively. (Author)

  2. Potassium-strontium amd ammonium-strontium tripolyphosphates

    International Nuclear Information System (INIS)

    Preparation of low-soluble compounds during interaction of potassium and ammonium tripolyphosphates and strontium nitrate in aqueous solutions (0.1-1.0 mol.% concentration, 20 deg C temperature) is investigated. Crystal hydrates KSr2P3O10x7H2O, NH4Sr2P3O10x5H2O and amorphous salt Sr5(P3O10)2xXH2O (X=10-12) are extracted

  3. Effect of strontium chloride on the optical and mechanical properties of {gamma}-glycine crystals

    Energy Technology Data Exchange (ETDEWEB)

    Anbuchezhiyan, M. [Dept. of Physics, Valliammai Engineering College, SRM Nagar, Kattankulathur, Chennai (India); Ponnusamy, S.; Muthamizhchelvan, C. [Centre for Material Science and Nano Devices, Department of Physics, SRM University, Kattankulathur, Chennai (India); Singh, S.P.; Pal, P.K.; Datta, P.K. [Department of Physics and Meteorology, Indian Institute of Technology, Kharagpur (India)

    2010-05-15

    Single crystals of {gamma}-glycine have been grown from aqueous solution in the presence of small amount of strontium chloride. Single crystal X-Ray diffraction analysis was used to measure the unit cell parameters and to confirm the crystal structure. The grown crystals have also been subjected to powder X-Ray diffraction study to identify the crystalline nature. The presence of all the functional groups of the {gamma}-glycine has been confirmed by Fourier Transform Infrared (FTIR) spectral analysis. The presence of hydrogen and carbon in the glycine molecules was confirmed by using proton and carbon nuclear magnetic resonance (NMR) spectral analyses. Optical behavior of the crystal was studied using UV - Visible absorbance spectroscopy and second harmonic generation (SHG) studies. The SHG efficiency of {gamma}-glycine is greater than that of standard potassium dihydrogen phosphate (KDP). Mechanical strength of the {gamma}-glycine crystal has been determined by microhardness studies. Thermal stability of the grown crystal is probed using thermo gravimetric analysis and differential thermal analysis. Laser damage threshold value has been determined using Q-switched Nd:YAG laser operating at 1064 nm and with 13 ns pulse width in single shot mode. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. Potassium-Related Periodic Paralysis

    OpenAIRE

    A Lesani; MH Moradi Nejad

    1995-01-01

    Potassium-related periodic paralysis may be associated with hypo, normo, or hyperkalemic disturbance of the Potassium level. Clinical features, laboratory findings and ECG as well as EMG changes are different in the 3 types of the disease. The treatment demands correction of the Potassium level of the blood serum. The disease is normally transferred as an autosomal dominant trait. In this article we present a 9-year old girl who suffered from hypokalemic paralysis since she was 4 years old.

  5. Effects of an aqueous leaf extract of Sansevieria senegambica Baker on plasma biochemistry and haematological indices of salt-loaded rats

    Directory of Open Access Journals (Sweden)

    Jude C. Ikewuchi

    2011-11-01

    Full Text Available The effects of an aqueous extract of the leaves of Sansevieria senegambica on plasma marker enzymes, plasma chemistry and the haematological profile of salt-loaded rats were studied. The control group received only a commercial feed, whilst the four test groups received a diet consisting of the commercial feed and salt, although the reference treatment group was reverted to the normal feed at the end of 6 weeks. The extract was orally administered daily at 150 mg/kg or 200 mg/kg body weight to two test groups, respectively; whilst the test control, reference and control groups received equivalent volumes of water by the same route. The extract had no negative effects on markers of liver and kidney functions, but it did produce leukocytosis, significantly increased (p < 0.05 plasma calcium and potassium levels and significantly decreased (p < 0.05 plasma sodium and chloride levels in the test animals compared to the test control animals. This result supports the traditional use of Sansevieria senegambica in the management of hypertension, whilst suggesting that the extract may be a potassium-sparing diuretic whose mechanism of antihypertensive action may be achieved through alteration of plasma sodium and potassium balances, or through calcium-mediated changes in vascular muscle tone.

  6. Disposable sensor for electrochemical determination of chloride ions.

    Science.gov (United States)

    Bujes-Garrido, Julia; Arcos-Martínez, M Julia

    2016-08-01

    This work describes the development of a new, simple and inexpensive method for the determination of chloride ions, by using voltammetric disposable sensors. The sensor includes three screen printed electrodes: a working, an auxiliary (both carbon based paste electrodes), and a pseudo-reference Ag/AgCl paste based electrode. Since the presence of chloride ions in the solution modifies the equilibrium potential of Ag/AgCl electrode, the concentration of this analyte has been determined through the systematic shift of the voltammetric peak potential of a control species such as potassium ferricyanide, potassium ferrocyanide or ferrocenemethanol. These control species can be used in solution or mixed into the carbon paste of the working screen printed electrode. In order to characterize the developed methods, reproducibility, repeatability and detection limit of the sensors were calculated in each case. Reproducibility values below 3% (n=5) were obtained. When ferrocenemethanol was used as control species, the lowest quantity of chloride ions detected was 10.0mM. A comprehensive study of interfering ions was also carried out. These sensors were successfully applied to determine the chloride content in sea water and in a commercial saline solution sample. PMID:27216668

  7. Recipe for potassium

    International Nuclear Information System (INIS)

    I investigate favorable conditions for producing potassium (K). Observations show [K/Fe] > 0 at low metallicities, while zero-metal supernova models show low [K/Fe] (e (from 0.51 to 0.60), the initial density ρmax (107, 108, and 109 [g/cm3]), and the e-fold time τ for the density (0.01, 0.1, and 1.0 [sec]). Among 90 models I have calculated, only 26 models show [K/Fe] > 0, and they all have ρmax = 109[g/cm3]. I discuss parameter dependence of [K/Fe].

  8. Positron scattering by potassium

    International Nuclear Information System (INIS)

    Coupled-state calculations in a K(4s, 4p, 5s, 5p, 3d) + Ps(1s, 2s, 2p, 3s, 3p, 3d) approximation are reported for positron scattering by ground-state potassium in the energy range 0.5-60.0 eV. Comparison is made with the earlier work of Hewitt et al (1993, 1994) in a K(4s, 4p, 5s, 5p) + Ps(1s, 2s, 2p) approximation. For the first time cross sections for positronium formation in n = 3 states are obtained. (author)

  9. Congenital chloride diarrhea: a review of twelve Arabian children

    Directory of Open Access Journals (Sweden)

    Elrefae F

    2013-06-01

    Full Text Available Fawaz Elrefae,1 Ahmed Farag Elhassanien,2 Hesham Abdel-Aziz Alghiaty3 1Pediatric Gastroenterology, Al-Adan Hospital, Kuwait; 2Faculty of Medicine, Elmansoura University, El Mansoura, El Dakahleya, Egypt; 3Faculty of Medicine, Benha University, Egypt Background: Congenital chloride diarrhea (CCD, a rare autosomal recessive disorder, is characterized by sustained watery diarrhea (due to defect of active Chloride/HCO3 exchange in the ileum and colon with high fecal chloride. Objective: To spotlight the common presentation of CCD for early management and prevention of complications. Subjects and methods: This is a retrospective case series study of patients diagnosed as CCD who were followed up in the pediatric department of Al-Adan Hospital, Kuwait. Results: Twelve patients diagnosed with CCD were born to consanguineous parents; had antenatal history of intrauterine growth retardation (IUGR; polyhydramnios; and distended hypoechoic fetal bowel; and presented with abdominal distension, hypotonia and muscle wasting. 90% of patients had maternal hypertension and 75% of patients had absence of normal meconium at birth. Our patients showed a decrease in serum sodium, potassium, chloride and urine chloride. Conclusion: A high level of suspicion for an early diagnosis of CCD should be considered for any infant presenting with chronic diarrhea, especially in the presence of consanguineous marriage, and the characteristic features in antenatal ultrasound. Thus, allowing for early investigations and appropriate management. Keywords: congenital chloride diarrhea, children, chronic diarrhea, metabolic alkalosis, prenatal diagnosis

  10. Potassium in milk and milk products

    International Nuclear Information System (INIS)

    The amount of potassium in imported processed milk was determined by gamma spectral analysis. The results show that the potassium content of diluted infant formula milk is closest to the reported mean concentration of potassium in human milk while other milk types have potassium values similar to the potassium content of cow milk. (Auth.). 2 figs., 5 refs

  11. Nicotine aqueous solutions: pH-measurements and salting-out effects - analysis of the effective Gibbs energies of hydration and ionic strengths of the solutions

    Directory of Open Access Journals (Sweden)

    Grozdanić Nikola D.

    2014-01-01

    Full Text Available This work is a continuation of our previous studies on the phase demixing - salting-out effects - in aqueous nicotine solutions. Thus, pH measurements were carried out allowing a brief analysis of the existing hydrogen bond interactions. Salting-out effects - the related experimental cloud point shifts - provoked by the addition of two inorganic salts, potassium nitrate and sodium sulfate, which were not studied so far, were determined. Analysis of the current and our previously reported salting-out/or salting-in phenomena in nicotine aqueous solutions was performed. In this respect, five studied salts were included: four inorganic salts (sodium chloride, potassium nitrate, sodium sulfate and sodium phosphate (Na3PO4 and ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate ([C2mim][EtSO4] or ECOENG212®. Based on the pH measurements the effective Gibbs energies of hydration and ionic strengths of the respective ternary solutions were calculated and plotted against the related cloud-point shifts caused by the addition of the salts. For the studied salts, the results and diagram obtained within this work may be used to predict the cloud-points shifts, based on the related quantities of the salts added and/or the molar Gibbs energies of hydration and/or ionic strengths requested in each case. [Projekat Ministarstva nauke Republike Srbije, br. 172063

  12. Reduction kinetics of aqueous U(VI) in acidic chloride brines to uraninite by methane, hydrogen or C-graphite under hydrothermal conditions: Implications for the genesis of unconformity-related uranium ore deposits

    Science.gov (United States)

    Dargent, Maxime; Truche, Laurent; Dubessy, Jean; Bessaque, Gilles; Marmier, Hervé

    2015-10-01

    The formation of hydrothermal uranium ore deposits involves the reduction of dissolved U(VI)(aq) to uraninite. However, the nature of the reducing agent and the kinetics of such a process are currently unknown. These questions are addressed through dedicated experiments performed under conditions relevant for the genesis of unconformity-related uranium (URU) deposits. We tested the efficiency of the following potential reductants supposed to be involved in the reaction: H2, CH4, C-graphite and dissolved Fe(II). Results demonstrate the great efficiency of H2, CH4 and C-graphite to reduce U(VI)(aq) into uraninite in acidic chloride brines, unlike dissolved Fe(II). Times needed for H2 (1.4 bar), CH4 (2.4 bar) and C-graphite (water/carbon mass ratio = 10) to reduce 1 mM of U(VI)(aq) in an acidic brine (1 m LiCl, pH ≈ 1 fixed by HCl) to uraninite at 200 °C are 12 h, 3 days and 4 months, respectively. The effects of temperature (T) between 100 °C and 200 °C, H2 partial pressure (0.14, 1.4, and 5.4 bar), salinity (0.1, 1 and 3.2 m LiCl) and pH at 25 °C (0.8 and 3.3) on the reduction rate were also investigated. Results show that increasing temperature and H2 partial pressure increase the reaction rate, whereas increasing salinity or pH have the reverse effect. The reduction of uranyl to uraninite follows an apparent zero-order with respect to time, whatever the considered electron donor. From the measured rate constants, the following values of activation energy (Ea), depending on the nature of the electron donor, have been derived: EaC-graphite = 155 ± 3 kJ mol-1, EaCH4 = 143 ± 6 kJ mol-1, and EaH2 = 124 ± 15 kJ mol-1 at T 150 °C. An empirical relationship between the reaction rate, the hydrogen partial pressure, the uranyl speciation, and the temperature is also proposed. This allows an estimation of the time of formation of a giant U ore deposit such as McArthur River (Canada). The duration of the mineralizing event is controlled both by the U concentration

  13. Traceable mean activity coefficients and osmotic coefficients in aqueous magnesium chloride solutions at T = 298.15 K up to a molality of 3.0 mol · kg−1

    International Nuclear Information System (INIS)

    Highlights: • This work reports new equations for thermodynamic activity quantities in aqueous MgCl2 solutions. • The new equations are functionally the same as those obtained previously solutions of CaCl2 and uni-univalent electrolytes. • The new activity and osmotic coefficients are fully traceable and transparent. • These new values were tested thoroughly with existing literature data. -- Abstract: The Hückel equation used in this study for the thermodynamic activity quantities in dilute MgCl2 solutions up to an ionic strength (=Im) of 1.5 mol · kg−1 contains two parameters being dependent on the electrolyte, i.e., those of B and b1. The former is linearly related to the ion-size parameter in the Debye–Hückel equation and the latter is the coefficient of the linear correction term with respect to the molality. For more concentrated solutions up to Im of 9.0 mol · kg−1, an extended Hückel equation was used. For it, the Hückel equation was extended with a quadratic term in molality, and the coefficient of this term is the third parameter b2. Parameters B and b1 for dilute MgCl2 solutions were obtained from the isopiestic data of Robinson and Stokes for solutions of this salt and KCl [Trans. Faraday Soc. 36 (1940) 733] by using the previous Hückel parameters for dilute KCl solutions [J. Chem. Eng. Data 54 (2009) 208]. The resulting parameters for MgCl2 solutions were successfully tested with all isopiestic data available in the literature for dilute solutions of this salt. For less dilute solutions, new values for parameters b1 and b2 were determined for the extended version of the Hückel equation of MgCl2 solutions from the isopiestic data of Rard and Miller [J. Chem. Eng. Data 26 (1981) 38] for NaCl and MgCl2 solutions but the dilute-solution value for parameter B was used. The previous extended Hückel equation for concentrated NaCl solutions was used in this estimation (see the KCl citation above). In the tests of the new parameter values

  14. Neural synchronization via potassium signaling

    DEFF Research Database (Denmark)

    Postnov, Dmitry E; Ryazanova, Ludmila S; Mosekilde, Erik;

    2006-01-01

    Using a relatively simple model we examine how variations of the extracellular potassium concentration can give rise to synchronization of two nearby pacemaker cells. With the volume of the extracellular space and the rate of potassium diffusion as control parameters, the dual nature of this reso...

  15. Bioinspired Artificial Sodium and Potassium Ion Channels.

    Science.gov (United States)

    Rodríguez-Vázquez, Nuria; Fuertes, Alberto; Amorín, Manuel; Granja, Juan R

    2016-01-01

    In Nature, all biological systems present a high level of compartmentalization in order to carry out a wide variety of functions in a very specific way. Hence, they need ways to be connected with the environment for communication, homeostasis equilibrium, nutrition, waste elimination, etc. The biological membranes carry out these functions; they consist of physical insulating barriers constituted mainly by phospholipids. These amphipathic molecules spontaneously aggregate in water to form bilayers in which the polar groups are exposed to the aqueous media while the non-polar chains self-organize by aggregating to each other to stay away from the aqueous media. The insulating properties of membranes are due to the formation of a hydrophobic bilayer covered at both sides by the hydrophilic phosphate groups. Thus, lipophilic molecules can permeate the membrane freely, while the small charged or very hydrophilic molecules require the assistance of other membrane components in order to overcome the energetic cost implied in crossing the non-polar region of the bilayer. Most of the large polar species (such as oligosaccharides, polypeptides or nucleic acids) cross into and out of the cell via endocytosis and exocytosis, respectively. Nature has created a series of systems (carriers and pores) in order to control the balance of small hydrophilic molecules and ions. The most important structures to achieve these goals are the ionophoric proteins that include the channel proteins, such as the sodium and potassium channels, and ionic transporters, including the sodium/potassium pumps or calcium/sodium exchangers among others. Inspired by these, scientists have created non-natural synthetic transporting structures to mimic the natural systems. The progress in the last years has been remarkable regarding the efficient transport of Na(+) and K(+) ions, despite the fact that the selectivity and the ON/OFF state of the non-natural systems remain a present and future challenge

  16. Fatal Dysrhythmia Following Potassium Replacement for Hypokalemic Periodic Paralysis

    Directory of Open Access Journals (Sweden)

    Ahmed, Imdad

    2010-02-01

    Full Text Available We present a case of fatal rebound hyperkalemia in a patient with thyrotoxic periodic paralysis (TPP treated with potassium supplementation. Although TPP is a rare hyperthyroidism-related endocrine disorder seen predominantly in men of Asian origin, the diagnosis should be considered in patients of non-Asian origins presenting with hypokalemia, muscle weakness or acute paralysis. The condition may present as a life threatening emergency and unfamiliarity with the disease could result in a fatal outcome. Immediate therapy with potassium chloride supplementation may foster a rapid recovery of muscle strength and prevent cardiac arrhythmias secondary to hypokalemia, but with a risk of rebound hyperkalemia. [West J Emerg Med. 2010; 11(1:57-59.

  17. Cardiac potassium channel subtypes

    DEFF Research Database (Denmark)

    Schmitt, Nicole; Grunnet, Morten; Olesen, Søren-Peter

    2014-01-01

    About 10 distinct potassium channels in the heart are involved in shaping the action potential. Some of the K(+) channels are primarily responsible for early repolarization, whereas others drive late repolarization and still others are open throughout the cardiac cycle. Three main K(+) channels...... drive the late repolarization of the ventricle with some redundancy, and in atria this repolarization reserve is supplemented by the fairly atrial-specific KV1.5, Kir3, KCa, and K2P channels. The role of the latter two subtypes in atria is currently being clarified, and several findings indicate that...... they could constitute targets for new pharmacological treatment of atrial fibrillation. The interplay between the different K(+) channel subtypes in both atria and ventricle is dynamic, and a significant up- and downregulation occurs in disease states such as atrial fibrillation or heart failure. The...

  18. Chloride removal from vitrification offgas

    International Nuclear Information System (INIS)

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations

  19. Suicide Attempt by Intravenous Potassium Self-Poisoning: A Case Report

    Directory of Open Access Journals (Sweden)

    Florent Battefort

    2012-01-01

    Full Text Available Introduction. Overdose of potassium is not as frequently encountered in clinical practice as hyperkalaemia due to acute or chronic renal disease. However, potassium overdoses leading to serious consequences do occur. Case Presentation. A 20-year-old nurse student presented with a cardiac arrest with asystole rhythm. Beside the patient were found four 50-mL syringes and empty vials of potassium chloride (20 mL, 10%. After initial resuscitation with epinephrine, 125 mL of a 4.2% intravenous solution of sodium bicarbonate were injected which resulted in the recovery of an effective cardiac activity. The patient recovered without sequelae. Conclusion. The difficulty in this case was to recognize the potassium poisoning. The advanced resuscitation with the use of a specific treatment helped to resuscitate the patient.

  20. SYNTHESIS OF POTASSIUM FERRATE FOR USE IN TEXTILE WASTEWATER TREATMENT

    OpenAIRE

    F Vaezi; A. Mesdaghinia; H. Jamani

    1999-01-01

    Potassium ferrate has been used as a multi-purpose chemical in treatment of wastewaters. With the formula of K2Fe04 it has 3 excellent characters for water treatment, so by using it alone, it would be possible to confine all reactivity, it is essential to prepare ferrate at the point of use. In this study, K2Fe04 was synthesized, then it has been employed for chlorine gas with an alkaline solution of ferric chloride, then it has been employed for textile wastewater treatment. Textile is one o...

  1. Improvement of cardiovascular effects of metoprolol by replacement of common salt with a potassium- and magnesium-enriched salt alternative.

    OpenAIRE

    Mervaala, E. M.; Laakso, J; Vapaatalo, H.; Karppanen, H.

    1994-01-01

    1. The influence of sodium chloride (NaCl)-enrichment of the diet (6% of the dry weight) and that of a novel sodium-reduced, potassium-, magnesium-, and L-lysine-enriched salt alternative on the cardiovascular effects of the beta 1-adrenoceptor blocking drug, metoprolol, was studied in stroke-prone spontaneously hypertensive rats. 2. Increased dietary sodium chloride intake produced a marked rise in blood pressure and induced left ventricular and renal hypertrophy. By contrast, the salt alter...

  2. Basolateral K+ channel involvement in forskolin-activated chloride secretion in human colon.

    Science.gov (United States)

    McNamara, B; Winter, D C; Cuffe, J E; O'Sullivan, G C; Harvey, B J

    1999-08-15

    1. In this study we investigated the role of basolateral potassium transport in maintaining cAMP-activated chloride secretion in human colonic epithelium. 2. Ion transport was quantified in isolated human colonic epithelium using the short-circuit current technique. Basolateral potassium transport was studied using nystatin permeabilization. Intracellular calcium measurements were obtained from isolated human colonic crypts using fura-2 spectrofluorescence imaging. 3. In intact isolated colonic strips, forskolin and prostaglandin E2 (PGE2) activated an inward transmembrane current (ISC) consistent with anion secretion (for forskolin DeltaISC = 63.8+/-6.2 microA cm(-2), n = 6; for PGE2 DeltaISC = 34.3+/-5.2 microA cm(-2), n = 6). This current was inhibited in chloride-free Krebs solution or by inhibiting basolateral chloride uptake with bumetanide and 4,4'-diisothiocyanatostilbene-2,2'-disulfonic acid DIDS). 4. The forskolin- and PGE2-induced chloride secretion was inhibited by basolateral exposure to barium (5 mM), tetrapentylammonium (10 microM) and tetraethylammonium (10 mM). 5. The transepithelial current produced under an apical to serosal K+ gradient in nystatin-perforated colon is generated at the basolateral membrane by K+ transport. Forskolin failed to activate this current under conditions of high or low calcium and failed to increase the levels of intracellular calcium in isolated crypts 6. In conclusion, we propose that potassium recycling through basolateral K+ channels is essential for cAMP-activated chloride secretion. PMID:10432355

  3. Electrochromic iridium oxide films: Compatibility with propionic acid, potassium hydroxide, and lithium perchlorate in propylene carbonate

    OpenAIRE

    Wen, Rui-Tao; Niklasson, Gunnar A.; Granqvist, Claes G.

    2013-01-01

    Porous thin films of It oxide were prepared by reactive dc magnetron sputtering onto unheated substrates. The crystallite size was similar to 5 nm, and a small amount of unoxidized Ir was present. The electrochromic performance was studied by optical transmittance measurements and cyclic voltammetry applied to films in aqueous and non-aqueous electrolytes, specifically being 1 M propionic acid, 1 M potassium hydroxide (KOH), and 1 M lithium perchlorate in propylene carbonate (Li-PC). Cyclic v...

  4. Production and mitigation of acid chlorides in geothermal steam

    Energy Technology Data Exchange (ETDEWEB)

    Simonson, J.M.; Palmer, D.A.

    1995-06-01

    Measurements of the equilibrium distribution of relatively nonvolatile solutes between aqueous liquid and vapor phases have been made at temperatures to 350{degrees}C for HCl(aq) and chloride salts. These data are directly applicable to problems of corrosive-steam production in geothermal steam systems. Compositions of high-temperature brines which could produce steam having given concentrations of chlorides may be estimated at various boiling temperatures. Effects of mitigation methods (e.g., desuperheating) can be calculated based on liquid-vapor equilibrium constants and solute mass balances under vapor-saturation conditions.

  5. 21 CFR 172.375 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium iodide. 172.375 Section 172.375 Food and... Dietary and Nutritional Additives § 172.375 Potassium iodide. The food additive potassium iodide may be safely used in accordance with the following prescribed conditions: (a) Potassium iodide may be...

  6. Determination of microamounts of potassium in sodium iodide by atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Microdetermination of potassium in sodium iodide was developed by the standard addition method. Twenty grams of sample were dissolved in 50 ml of water in a quartz beaker. To the solution, 30 ml of concentrated hydrochloric acid and 30 ml of 30% hydrogen peroxide were added, and evaporated to dryness. By this process sodium iodide was converted into sodium chloride. The cake thus obtained was dissolved in water and diluted to exactly 200 ml. To 25 ml aliquots of the solution, the standard potassium and cesium chloride solutions were added and diluted to 50 ml with water; the concentration of potassium was 0 -- 1 mg/l and that of cesium 4 mM. These solutions were introduced into an air-propane flame and the absorbances were measured at 769.9 nm. During the conversion reaction, hydrochloric acid was completely decomposed, and remained hydrogen peroxide had no influence for absorbance, and other backgrounds were negligible. The linear calibration curve was obtained in the range 0 -- 2 mg of potassium per liter. Potassium in sodium iodide was determined by this method within the coefficient of variation of +-(20 -- 3)% in the range (1.7 -- 32.5) ppm. (author)

  7. [Degradation of succinylcholine chloride].

    Science.gov (United States)

    Németh, G; Török, I; Paál, T

    1993-05-01

    Quantitative thin-layer chormatographic method has been developed for the investigation of the degradation of injection formulations containing succinylcholinium chloride. The method is based on the denistometric determination of the main degradation product, choline at 430 nm after visualization with iodine vapour. The stability of the injection was investigated under various storage conditions and it has been stated that considerable decomposition takes place during as short a period as one week. PMID:8362654

  8. Influence aqueous solutions on the mechanical behavior of argillaceous rocks

    International Nuclear Information System (INIS)

    when it is in contact of water showed that the mechanical response is ruled mainly by electrochemical phenomena which operate between the solution elements and the clay layers. This important result oriented the research to develop better the role of the chemistry in the behaviour. Swelling was therefore analysed by imposing on the sample a chemical loading while maintaining constant the axial stress. Monovalent and divalent salts which were used with various concentrations are the sodium chloride (NaCl), the potassium chloride (KCl) and the calcium chloride (CaCl2). The foreseen objective was to analyze the effect of the chemical path with decreasing or cyclic concentrations and to highlight the role of the solution normality, the type of salt and the anisotropy on the axial swelling. The experimental results obtained allowed the development of a new rheological model which takes into account the time, the anisotropy, the applied loading and the chemistry of the solution. This model was implemented in a finite element code to simulate simple cases and to prove its validity. (author)

  9. Chemical behaviour of plutonium in aqueous chloride solutions

    International Nuclear Information System (INIS)

    The chemical behaviour of Plutonium has been investigated in concentrated NaCl solutions in the neutral pH range. The α-radiation induced radiolysis reactions oxidize the Cl--ion to Cl2, HClO, ClO- and other species, which produce a strongly oxidizing medium. Under these conditions the Pu ions of lower oxidation states are readily oxidized to Pu(VI), which then undergo depending on the pH of the solution, various chemical reactions to produce PuO2Cln, PuO2(ClO)m or PuO2(OH)x species. In addition to primary radiolysis reactions taking place in NaCl solutions, the reactions leading to the PuO2(Cl)n and PuO2(ClO)m species have been characterized and quantified systematically by spectroscopic and thermodynamic evaluation. The redox and complexation reactions of Pu ions under varying NaCl concentration, specific α-activity and pH are discussed. (orig.)

  10. Separate Detection of Sodium and Potassium Ions with Sub-micropipette Probe

    Science.gov (United States)

    Takami, Tomohide; Son, Jong Wan; Lee, Joo-Kyung; Park, Bae Ho; Kawai, Tomoji

    2011-08-01

    A novel method of detecting sodium and potassium ions separately with a sub-micropipette probe of approximately 100 nm inner diameter has been demonstrated. A poly(vinyl chloride) film containing crown ether ligands in sub-micropipettes filtered the ions. Sodium ions were trapped with bis(12-crown-4), whereas potassium ions were trapped with bis(benzo-15-crown-5). Alternate and direct bias voltages were applied to the counter electrode in the sub-micropipette so that the local ion concentrations could be observed as current signals after conversion to milivolt output signals with our low-current detection system prepared for this study.

  11. Hypokalemia as an early index in trimethyltin chloride poisoning

    Institute of Scientific and Technical Information of China (English)

    TangXJ; LiLY

    2002-01-01

    Nowdays,dimethyltin(DMT) is widely used as plastic stabilizers.Trimethyltin chloride(TMT) is the main byproduct of DMT.Our study on SD rats had shown that hypokalemia played a very inportant role in TMT poisoning.The purpose of this paper was to clarify if hypokalemia can be used as an early index of diagnosis,therapy and prevention in TMT intoxication.We analyzed the serum potassium of 169 cases exposed to TMT,from which 123 cases were measured in 24h after the disease was complained.The serum potassium of 96 cases(78%) were below 3.5mmol·L-1.Four cases died with very serious hypokalemia(<2.5mmol·L-1).The lower the serum potassium was,the more serious of symptom would be found.In the recent 3 accidents,we measured the serum potassium as early as possible,and treat with KCl(iv or po) rightly.All of the 95 cases recovered within 1 month.No sequela was found.The available evidence suggested that hypokalemia could be the early clinical signs of TMT intoxication.Injection of KCl early should be the first selected treatment.

  12. Tripolyphosphates of potassium-cadmium and ammonium-cadmium

    International Nuclear Information System (INIS)

    Formation of barely soluble compounds during interaction of ammonium and potassium tripolyphosphates with cadmium nitrate in aqueous solutions (0.1-2.0 mol% concentration, the temperature 20 deg C), is investigated. KCd2P3O10x7H2O, NH4Cd2P3O10x7H2O crystallohydrates and Cd5(P3O10)2xhH2O (x=10-13) X-ray amorphous salt, that are dissolved in potassium and ammonium tripolyphosphate solution with formation of Cd2+:P3O105-=1:1 and 1:2 complexes, are separated. In K5P3O10-Cd(NO3)2-H2O system Cd2+:P3O105-=1:1 complex is crystallized in a mixture with varied composition amorphous phase

  13. Improved analysis of picomole quantities of lithium, sodium, and potassium in biological fluids.

    Science.gov (United States)

    Shalmi, M; Kibble, J D; Day, J P; Christensen, P; Atherton, J C

    1994-10-01

    The analysis of picomolar lithium, sodium, and potassium by electrothermal atomic absorption spectrophotometry was studied using a Perkin-Elmer Zeeman 3030 spectrophotometer. With ordinary pyrolytically coated graphite tubes, a number of interference effects associated with the sample matrix were observed. In particular, the lithium and potassium absorbance signal was depressed by chloride, an effect shown to be dependent on the preatomization heating. When an in situ tantalum-coated atomization surface was used, matrix interferences observed in lithium and potassium analyses were abolished, and the linear range for the potassium assay was extended. Technical difficulties encountered during sodium analysis at the primary wavelength were effectively circumvented by analysis at a less-sensitive wavelength (303.3 nm), at which tantalum coating also prevented significant chloride interference. The improved microanalyses were employed to reevaluate the handling of lithium, sodium, and potassium along the proximal convoluted tubule (PCT) of the anesthetized rat. The average tubular fluid-to-plasma concentration ratios for lithium [(TF/P)Li] and sodium [(TF/P)Na] were 1.13 +/- 0.08, n = 26, and 0.99 +/- 0.07 (n = 26), respectively. The tubular fluid-to-plasma ultrafiltrate concentration ratio for potassium [(TF/UF)K] was 1.09 +/- 0.05 (n = 13). Ratios did not change significantly with puncture site along the PCT for any of the ions. (TF/P)Li and (TF/UF)K were significantly greater than (TF/P)Na, indicating that lithium and potassium reabsorption do not directly parallel sodium reabsorption in the PCT. PMID:7943365

  14. Benzalkonium Chloride Induced Bronchoconstriction in Patients with Stable Bronchial Asthma

    OpenAIRE

    Lee, Byoung Hoon; Kim, Sang-Hoon

    2007-01-01

    Background Although benzalkonium chloride (BAC)-induced bronchoconstriction occurs in patients with bronchial asthma, BAC-containing nebulizer solutions are still being used in daily practice in Korea. The aim of this study was to evaluate the effects of inhaled aqueous solutions containing BAC. Methods Thirty subjects with bronchial asthma and 10 normal controls inhaled up to three 600 µg nebulized doses of BAC using a jet nebulizer. FEV1 (forced expiratory volume at one second) was measured...

  15. Interaction between gaseous ozone and crystalline potassium bromide

    Science.gov (United States)

    Levanov, A. V.; Maksimov, I. B.; Isaikina, O. Ya.; Antipenko, E. E.; Lunin, V. V.

    2016-07-01

    The formation of nonvolatile products of the oxidation of a bromide ion during the interaction between gaseous ozone and powdered crystalline KBr is studied. It is found that potassium bromate KBrO3 is the main product of the reaction. The influence of major experimental factors (the duration of ozonation, the concentration of ozone, the humidity of the initial gas, and the temperature) on the rate of formation of bromate is studied. The effective constants of the formation of bromate during the interaction between O3 and Br- in a heterogeneous gas-solid body system and in a homogeneous aqueous solution are compared.

  16. Hydrothermal synthesis of perovskite and pyrochlore powders of potassium tantalate

    OpenAIRE

    Goh, Gregory K. L.; Haile, Sossina M.; Levi, Carlos G.; Lange, Fred F.

    2002-01-01

    Potassium tantalate powders were hydrothermally synthesized at 100 to 200 °C in 4 to 15 M aqueous KOH solutions. A defect pyrochlore, Kta_(2)O_(5)(OH). nH2O (n ≈ 1.4), was obtained at 4 M KOH, but at 7–12 M KOH, this pyrochlore was gradually replaced by a defect perovskite as the stable phase. At 15 M KOH, there was no intermediate pyrochlore, only a defect perovskite, K_(0.85)Ta_(0.92)O_(2.43)(OH)_(0.57) 0.15H_(2)O. Synthesis at higher KOH concentrations led to greater incorporation of prot...

  17. Understanding ternary poly(potassium benzimidazolide)-based polymer electrolytes

    DEFF Research Database (Denmark)

    Aili, David; Jankova Atanasova, Katja; Han, Junyoung;

    2016-01-01

    swelling, high electrolyte uptake, dramatic plasticization and increase of the ion conductivity for the formed poly(potassium benzimidazolide)-based structure. Further increasing the concentration of the bulk solution to 50 wt.% resulted in dehydration and extensive crystallization of the polymer matrix......Poly(2,20-(m-phenylene)-5,50-bisbenzimidazole) (m-PBI) can dissolve large amounts of aqueous electrolytes to give materials with extraordinary high ion conductivity and the practical applicability has been demonstrated repeatedly in fuel cells, water electrolysers and as anion conducting component...

  18. Ion exchange in a zeolite-molten chloride system

    International Nuclear Information System (INIS)

    Electrometallurgical treatment of spent nuclear fuel results in a secondary waste stream of radioactive fission products dissolved in chloride salt. Disposal plans include a waste form that can incorporate chloride forms featuring one or more zeolites consolidated with sintered glass. A candidate method for incorporating fission products in the zeolites is passing the contaminated salt over a zeolite column for ion exchange. To date, the molten chloride ion-exchange properties of four zeolites have been investigated for this process: zeolite A, IE95 reg-sign, clinoptilolite, and mordenite. Of these, zeolite A has been the most promising. Treating zeolite 4A, the sodium form of zeolite A , with the solvent salt for the waste stream-lithium-potassium chloride of eutectic melting composition, is expected to provide a material with favorable ion-exchange properties for the treatment of the waste salt. The authors constructed a pilot-plant system for the ion-exchange column. Initial results indicate that there is a direct relationship between the two operating variable of interest, temperature, and initial sodium concentration. Also, the mass ratio has been about 3--5 to bring the sodium concentration of the effluent below 1 mol%

  19. Lysozyme Net Charge and Ion Binding in Concentrated Aqueous Electrolyte Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Kuehner, Daniel E.; Engmann, Jan; Fergg, Florian; Wernick, Meredith; Blanch, Harvey W.; Prausnitz, John M.

    1999-02-01

    Hydrogen-ion titrations were conducted for hen-egg-white lysozyme in solutions of potassium chloride, over the range of pH 2.5 - 11.5 and for ionic strengths to 2. 0 M. The dependence of lysozyme's net proton charge, zP' on pH and ionic-strength in potassium-chloride solution is measured. From the ionic-strength dependence of zP' interactions of lysozynie with potassium and chloride ions are calculated using the molecular-thennodynamic theory of Fraaije and Lyklema 1. Lysozyme interacts preferentially with up to 12 chloride ions at pH 2.5. The observed dependence of ion-protein interactions on pH and ionic strength is explained in terms of electricdouble-layer theory. New experimental pKa data are reported for eleven ammo acids in potassium-chloride solutions of ionic strength to 3.0 M.

  20. Turbidimetric determination of polyacrylamide in aqueous solutions with the use of oxidizing agents

    International Nuclear Information System (INIS)

    Polyacrylamide is widely used in industry. For example, one of the methods for obtaining microspheres of metal oxides, particularly a mixed nuclear fuel, is based on a process involving the ammoniacal precipitation of hydroxides from aqueous solutions of metal nitrates in the presence of polyacrylamide (PAA), which promotes the formation of spheres in the initial stages of the process. Monitoring the industrial process, the course of the treatment of the production waste products, and the composition of the waste water calls for determination of the content of PAA in industrial solutions. The existing methods for determining PAA are based on its chemical properties, which are specified by the presence of amide groupings in its molecule. The use of the classical methods of analysis, which are based on the reactions of PAA with formaldehyde, sulfuric acid, etc. and the hydrolysis of PAA, do not provide reliable results, since PAA is partially or completely hydrolyzed in industrial solutions. In addition, industrial solutions contain various modifiers, including urea and urotropin, and the method of determining PAA from the amount of ammonia evolved is consequently unacceptable. Turbidimetric methods of analysis, in which the content of PAA is evaluated from the turbidity caused by the formation of suspension during hydrolysis or upon the introduction of NaClO4 or diisotubylphenoxyethoxyethyldimethylbenzyl chloride, are known. The purpose of the present work was to develop a simple quick method for determining polymers in solutions, including solutions from the production and treatment of nuclear fuel. The following reagents were proposed for the turbidimetric determination of PAA: cerium(IV) sulfate, potassium dichromate, and potassium permanganate. 5 refs., 3 figs., 1 tab

  1. Temperature and sodium chloride effects on the solubility of anthracene in water

    International Nuclear Information System (INIS)

    The solubility of anthracene was measured in pure water and in sodium chloride aqueous solution (salt concentration, m/mol . kg-1 = 0.1006, 0.5056, and 0.6082) at temperatures between (278 and 333) K. Solubility of anthracene in pure water agrees fairly well with values reported in earlier similar studies. Solubility of anthracene in sodium chloride aqueous solutions ranged from (6 . 10-8 to 143 . 10-8) mol . kg-1. Sodium chloride had a salting-out effect on the solubility of anthracene. The salting-out coefficients did not vary significantly with temperature over the range studied. The average salting-out coefficient for anthracene was 0.256 kg . mol-1. The standard molar Gibbs free energies, ΔtrGo, enthalpies, ΔtrHo, and entropies, ΔtrSo, for the transfer of anthracene from pure water to sodium chloride aqueous solutions were also estimated. Most of the estimated ΔtrGo values were positive [(20 to 1230) J . mol-1]. The analysis of the thermodynamic parameters shows that the transfer of anthracene from pure water to sodium chloride aqueous solution is thermodynamically unfavorable, and that this unfavorable condition is caused by a decrease in entropy.

  2. Selective flotation of zinc(II) and silver(I) ions from dilute aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Charewicz, W.A.; Holowiecka, B.A.; Walkowiak, W. [Wroclaw Univ. of Tech. (Poland)

    1999-09-01

    An experimental investigation is presented of the batch competitive flotation of zinc(II) and silver(I) ions from dilute aqueous solutions with sodium dodecylsulfate and ammonium tetradecysulfonate as anionic surfactants and with cetylpyridinium chloride as a cationic surfactant. The sequence of growing affinity of metal cations to anionic surfactants is the same as the sequence of ionic potential values of the studied cations: AG{sup +} < Zn{sup 2+}. The presence of potassium sulfate in aqueous solution has a negative influence of Zn{sup 2+} foam separation with a anionic surfactant which is due to competition for the surfactant between Zn{sup 2+} and K{sup +} cations. Also, the effect of inorganic ligands (i.e., thiosulfates, thiocyanates, and cyanides) on the selectivity of ion flotation of Zn(II) and Ag(I) is established. Results are discussed in terms of the complex species of zinc(II) and silver(I). At a total S{sub 2}O{sub 3}{sup 2{minus}} concentration of 3 {times} 10{sup {minus}6} M, the silver(I) is floated as a mixture of anions [Ag(S{sub 2}O{sub 3})]{sup {minus}} and [Ag(S{sub 2}O{sub 3}){sub 2}]{sup 3{minus}}, whereas zinc(II) remains in the aqueous phase as Zn{sup 2+}. At total concentrations of SCN{sup {minus}} from 1 {times} 10{sup {minus}4} to 2 {times} 10{sup {minus}3} M, silver(I) is floated as a mixture of [Ag(SCN){sub 2}]{sup {minus}} and AgSCN species. Partial separation of zinc(II) from silver(I) can be achieved in the presence of CN{sup {minus}} ligands at total concentrations varying from 2.5 {times} 10{sup {minus}4} to 1.0 {times} 10{sup {minus}3} M. The affinity of the studied cyanide complexes to cetylpyridinium chloride follows the order [Ag(CN){sub 2}]{sup {minus}} < [Zn(CN){sub 4}]{sup 2{minus}} + [Zn(CN){sub 3}]{sup {minus}}.

  3. Aqueous media treatment and decontamination of hazardous chemical and biological substances by contact plasma

    International Nuclear Information System (INIS)

    Usage of non-equilibrium contact plasma for processes of decontamination and neutralization in conditions of manifestation of chemical, biological and radiation terrorism takes on special significance due to portability of equipment and its mobility in places where toxic liquid media hazardous for people's health are located. Processes of decontamination of aqueous media, seminated with pathogenic microorganisms and viruses, treatment of water containing toxic heavy metals, cyanides, surface-active substances, and heavy radioactive elements, are investigated. Examples of activation processes in infected water and toxic aqueous solutions present convincing evidence of the way, how new quality technological approach for achievement of high enough degree of the said media treatment is used in each specific case. Among new properties of water activated as a result of action of non-equilibrium contact plasma, it is necessary to mention presence of cluster structure, confirmed by well-known spectral and physical-chemical methods, presence of peroxide compounds, active particles and radicals. Anti-microbial activity which is displayed under action of plasma in aqueous media (chemically pure water, drinking water, aqueous solutions of sodium chloride, potassium iodide, as well as other inorganic compounds) towards wide range of pathogenic and conventionally pathogenic microorganisms allows use them as reliable, accessible and low-cost preparations for increasing the degree of safety of food products. Combination of such processes with known methods of filtration and ultra-filtration gives an efficient and available complex capable of withstanding any threats, which may arise for population and living organisms. Present-day level of machine-building, electrical engineering, and electronics allows predict creation of industrial plasma installations, adapted to conditions of various terrorist threats, with minimized power consumption and optimized technological parameters

  4. Ultrasound-Accelerated Synthesis of Asymmetrical Thiosulfonate S-Esters by Base-Promoted Reaction of Sulfonyl Chlorides with Thiols

    DEFF Research Database (Denmark)

    Pham, Hien Thi; Nguyen, Ngoc-Lan Thi; Duus, Fritz;

    2015-01-01

    Amberlyst A-26, Mg-Al hydrotalcite, potassium fluoride absorbed on alumina, triethylamine and pyridine have been tested as base catalysts and reagents for the reaction of sulfonyl chlorides with thiols to prepare thiosulfonate S-esters. The reactions were performed under solvent-free conditions or...

  5. The heart and potassium: a banana republic.

    Science.gov (United States)

    Khan, Ehsan; Spiers, Christine; Khan, Maria

    2013-03-01

    The importance of potassium in maintaining stable cardiac function is a clinically understood phenomenon. Physiologically the importance of potassium in cardiac function is described by the large number of different kinds of potassium ions channels found in the heart compared to channels and membrane transport mechanisms for other ions such as sodium and calcium. Potassium is important in physiological homeostatic control of cardiac function, but is also of relevance to the diseased state, as potassium-related effects may stabilize or destabilize cardiac function. This article aims to provide a detailed understanding of potassium-mediated cardiac function. This will help the clinical practitioner evaluate how modulation of potassium ion channels by disease and pharmacological manipulation affect the cardiac patient, thus aiding in decision making when faced with clinical problems related to potassium. PMID:23425010

  6. Synthesis and structure characterization of diethyldiallylammonium chloride

    Institute of Scientific and Technical Information of China (English)

    刘立华; 龚竹青; 郑雅杰

    2003-01-01

    The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.

  7. Valyl benzyl ester chloride

    Directory of Open Access Journals (Sweden)

    Grzegorz Dutkiewicz

    2010-02-01

    Full Text Available In the title compound (systematic name: 1-benzyloxy-3-methyl-1-oxobutan-2-aminium chloride, C12H18NO2+·Cl−, the ester group is approximately planar, with a maximum deviation of 0.040 (2 Å from the least-squares plane, and makes a dihedral angle of 28.92 (16° with the phenyl ring. The crystal structure is organized by N—H...Cl hydrogen bonds which join the two components into a chain along the b axis. Pairs of chains arranged antiparallel are interconnected by further N—H...Cl hydrogen bonds, forming eight-membered rings. Similar packing modes have been observed in a number of amino acid ester halides with a short unit-cell parameter of ca 5.5 Å along the direction in which the chains run.

  8. Increased serum potassium affects renal outcomes

    DEFF Research Database (Denmark)

    Miao, Y; Dobre, D; Heerspink, H J Lambers; Brenner, B M; Cooper, M E; Parving, Hans-Henrik Dyring; Shahinfar, S; Grobbee, D; de Zeeuw, D

    2011-01-01

    To assess the effect of an angiotensin receptor blocker (ARB) on serum potassium and the effect of a serum potassium change on renal outcomes in patients with type 2 diabetes and nephropathy.......To assess the effect of an angiotensin receptor blocker (ARB) on serum potassium and the effect of a serum potassium change on renal outcomes in patients with type 2 diabetes and nephropathy....

  9. Potassium and High Blood Pressure

    Science.gov (United States)

    ... Pressure Tools & Resources Stroke More Potassium and High Blood Pressure Updated:Mar 1,2016 A diet that includes ... was last reviewed on 08/04/2014. High Blood Pressure • Home • About High Blood Pressure (HBP) • Why HBP ...

  10. Status of potassium permanganate - 2008

    Science.gov (United States)

    This is a brief overview of the Technical Sections completed and being worked on for the New Animal Drug Application (NADA) for potassium permanganate will be presented. Initial Label Claim (Columnaris on catfish/HSB): 1) Human Food Safety - Complete for all fin fish (June 1999). A hazard charac...

  11. Safety evaluations of the aqueous extract of Acacia karroo stem bark in rats and mice

    Directory of Open Access Journals (Sweden)

    Adeolu A. Adedapo

    2008-10-01

    Full Text Available The aqueous extract from the shoot of Acacia karroo was evaluated for its acute toxicity by the oral route in mice and for the sub acute effect on haematological, biochemical and histological parameters in rats. In the acute toxicity test, A. karroo extract caused death in animals that received 1600 and 3200 mg/kg doses. Oral treatments in rats with this extract at 800 mg/kg did not cause any significant change in the red blood cell count (RBC, packed cell volume (PCV, haemoglobin concentration (HB, mean corpuscular volume (MCV, mean corpuscular haemoglobin concentration (MCHC, mean corpuscular haemoglobin (MCH, white blood cells and its differentials. It, however, caused a significance decrease in the levels of platelets. In the biochemical parameters, the extract caused a significant decrease in the levels of total protein, albumin, globulin, aspartate amino transferase (AST, alanine amino transferase (ALT, total and unconjugated bilirubin. Changes were also noted in the body weights but no significant changes were observed in the levels of some electrolytes (sodium, potassium and chloride. Clinico-pathologically, starry hair coat, respiratory distress and mortality were recorded. Lung with multiple abscess, kidney and liver with mild congestion were also observed histopathologically. The study concluded that caution must be exercised in the use of the plant for medicinal purposes .

  12. A kinetic study of gaseous potassium capture by coal minerals in a high temperature fixed-bed reactor

    DEFF Research Database (Denmark)

    Zheng, Yuanjing; Jensen, Peter Arendt; Jensen, Anker Degn

    2008-01-01

    The reactions between gaseous potassium chloride and coal minerals were investigated in a lab-scale high temperature fixed-bed reactor using single sorbent pellets. The applied coal minerals included kaolin, mullite, silica, alumina, bituminous coal ash, and lignite coal ash that were formed into...... long cylindrical pellets. Kaolin and bituminous coal ash that both have significant amounts of Si and Al show superior potassium capture characteristics. Experimental results show that capture of potassium by kaolin is independent of the gas oxygen content. Kaolin releases water and forms metakaolin...... temperatures below 1300°C. However, the weight gain by mullite is only slightly smaller than that by kaolin in the temperature range of 1300-1500°C. A simple model was developed for the gas-solid reaction between potassium vapor and metakaolin pellet at 900°C....

  13. 21 CFR 172.730 - Potassium bromate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium bromate. 172.730 Section 172.730 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Specific Usage Additives § 172.730 Potassium bromate. The food additive potassium bromate may be...

  14. 21 CFR 182.3640 - Potassium sorbate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium sorbate. 182.3640 Section 182.3640 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Potassium sorbate. (a) Product. Potassium sorbate. (b) Conditions of use. This substance is...

  15. 21 CFR 172.160 - Potassium nitrate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium nitrate. 172.160 Section 172.160 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Preservatives § 172.160 Potassium nitrate. The food additive potassium nitrate may be safely used as a...

  16. 21 CFR 582.5634 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Potassium iodide. 582.5634 Section 582.5634 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5634 Potassium iodide. (a) Product. Potassium iodide. (b) Tolerance. 0.01 percent....

  17. 75 FR 51112 - Potassium Permanganate From China

    Science.gov (United States)

    2010-08-18

    ... COMMISSION Potassium Permanganate From China AGENCY: United States International Trade Commission. ACTION: Scheduling of an expedited five-year review concerning the antidumping duty order on potassium permanganate... whether revocation of the antidumping duty order on potassium permanganate from China would be likely...

  18. Flow of Aqueous Humor

    Science.gov (United States)

    ... Facebook Twitter Google Plus Email Print this page Flow of Aqueous Humor Most, but not all, forms ... aqueous humor) produced by the eye's ciliary body flows out freely (follow blue arrow). Aqueous humor flows ...

  19. Detection of single base mismatches of thymine and cytosine residues by potassium permanganate and hydroxylamine in the presence of tetralkylammonium salts.

    OpenAIRE

    Gogos, J.A.; Karayiorgou, M; Aburatani, H; Kafatos, F C

    1990-01-01

    In the presence of tetramethylammonium chloride, potassium permanganate specifically modifies mismatched thymines. Similarly, the modification of mismatched cytosines by hydroxylamine was enhanced by tetraethylammonium chloride. Modification followed by piperidine cleavage permits specific identification of the T and C mismatches and by extension, when the opposite DNA strand is analyzed, of A and G mismatches as well. These reactions can be performed conveniently with DNA immobilized on Hybo...

  20. Electroprecipitation of potassium americyl carbonate from potassium carbonate solutions

    International Nuclear Information System (INIS)

    Precipitation of potassium americyl carbonate was carried out at multigram scale by oxidizing americium(III) at the platinum anode in 3M K2CO3 solutions. Early investigations were conducted on pure americium 241 solutions on the 10 to 40 mg scale, in order to study the different parameters of the electrolysis, and to prove the feasibility of the process. Further experiments were performed on the 20 g scale, in impure americium 241 solutions. Electrolysis performed at 600C with a platinum grid as the anode, and a tantalum rod immersed in a cathodic compartment, precipitated 20 g of americium 241 with yields above 99% in 2 h. The electroprecipitation process presents the advantage of being clean and suitable for automation techniques in comparison with the chemical oxidation process using potassium persulphate. (orig.)

  1. Electroprecipitation of potassium americyl carbonate from potassium carbonate solutions

    International Nuclear Information System (INIS)

    Precipitation of potassium americyl carbonate was carried out at multigram scale by oxidizing at platinum anode Am(III) in 3 M K2CO3 solutions. Early investigations were conducted on pure americium 241 solutions on 10 to 40 mg scale, in order to study the different parameters of the electrolysis, and to prove the faisability of the process. Further experiments have been performed on the 20 grams scale, in impure americium 241 solutions. Electrolysis performed at 600C with platinum grid as anode, and tantalum rod immersed in a cathodic compartment, precipitates 20 grams of americium 241 with yields above 99% in two hours. The electroprecipitation process presents the advantage to be clean and suitable for automation technique in comparison with the chemical oxidation process using potassium persulfate

  2. Plant growth, Leaf Nutrient status, fruit yield and quality of Nagpur mandarin (Citrus reticulate Blanco as influenced by potassium (K fertigation with four potash fertilizer sources

    Directory of Open Access Journals (Sweden)

    Parameshwar Sidramappa Shirgure

    2013-04-01

    Full Text Available To investigate the effect of different potassium (K fertilizers applied through fertigation system during three different seasons on yield and quality behaviors of 14-16 years Nagpur mandarin an experiment was conducted at National Research Centre for Citrus, Nagpur during 2009-2012. The Nagpur mandarin plants requires potassium which, when applied in different amounts during the flower bud initiation to before fruit maturity can affect the yield and quality of fruit as well. The treatments in experiment consisted of; T1 - fertigation with potassium chloride [KCL], T2- fertigation with potassium nitrate [KNO3], T3- fertigation with potassium sulphate [K2SO4] and T4- fertigation with mono potassium phosphate [KH2PO4] @ 150 g K2O/plant. The recommended fertigation dose was 500:150:150 (N:P:K and given through these treatments along with various fertilizers combination of urea of phosphate, urea, and P2O5 acid. Nitrogen elemnet was given from October to January month and N, P and K all were given from February to June month. Each fertigation treatment was given at 15 days interval and fruit yield and quality were measured at harvest. Results showed the highest response of the fruit yield (31.13 t/ha with treatment mono potassium phosphate followed by in fertigation with potassium nitrate (29.4 t/ha. The total soluble solids was highest (10.49 0Brix in K fertigation with mono potassium phosphate followed by fertigation with potassium sulphate (10.48 0Brix. Highest juice content (38.76 % and low acidity (0.77 % was found in K fertigation with mono potassium phosphate. The highest TSS to acidity ratio (sweetness indicator was observed in Mono potassium Phosphate (13.6 followed by Potassium sulphate (13.1.

  3. Chemical reactions at aqueous interfaces

    Science.gov (United States)

    Vecitis, Chad David

    2009-12-01

    Interfaces or phase boundaries are a unique chemical environment relative to individual gas, liquid, or solid phases. Interfacial reaction mechanisms and kinetics are often at variance with homogeneous chemistry due to mass transfer, molecular orientation, and catalytic effects. Aqueous interfaces are a common subject of environmental science and engineering research, and three environmentally relevant aqueous interfaces are investigated in this thesis: 1) fluorochemical sonochemistry (bubble-water), 2) aqueous aerosol ozonation (gas-water droplet), and 3) electrolytic hydrogen production and simultaneous organic oxidation (water-metal/semiconductor). Direct interfacial analysis under environmentally relevant conditions is difficult, since most surface-specific techniques require relatively `extreme' conditions. Thus, the experimental investigations here focus on the development of chemical reactors and analytical techniques for the completion of time/concentration-dependent measurements of reactants and their products. Kinetic modeling, estimations, and/or correlations were used to extract information on interfacially relevant processes. We found that interfacial chemistry was determined to be the rate-limiting step to a subsequent series of relatively fast homogeneous reactions, for example: 1) Pyrolytic cleavage of the ionic headgroup of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) adsorbed to cavitating bubble-water interfaces during sonolysis was the rate-determining step in transformation to their inorganic constituents carbon monoxide, carbon dioxide, and fluoride; 2) ozone oxidation of aqueous iodide to hypoiodous acid at the aerosol-gas interface is the rate-determining step in the oxidation of bromide and chloride to dihalogens; 3) Electrolytic oxidation of anodic titanol surface groups is rate-limiting for the overall oxidation of organics by the dichloride radical. We also found chemistry unique to the interface, for example: 1

  4. Formation of plutonium phosphates in chloride melts

    Energy Technology Data Exchange (ETDEWEB)

    Burnaeva, A.A.; Kryukova, A.I.; Kazanstev, G' N.; Skiba, O.V.; Korshunov, I.A.

    1984-01-01

    Introduction of sodium- and potassium phosphates Na/sub 3/PO/sub 4/ and K/sub 3/PO/sub 4/ in the PuCl/sub 3/-NaCl, PuCl/sub 3/-KCl melts results in reduction of plutonium amount in the liquid phase. Low-soluble plutonium (3) phosphates, of assumed Na/sub 3/Pu/sub 2/ composition (PO/sub 4/)/sub 3/ are transported into the solid phase. Using the methods of radiographical and radiometric analyses the phases of plutonium phosphates separated by precipitation from chloride melt and also prepared from PuO/sub 2/ and NaH/sub 2/PO/sub 4/ at 1200 deg C are investigated. Their solubility in the NaCl-KCl melt and stability to these melts during a long-term contact, and also under the effect of CCl/sub 4/ are evaluated. The data are compared with similar data for thorium-, uranium-, americium-, curium-, zirconium-, rare earth phosphates.

  5. Sensitivity of freshwater mussels at two life stages to acute or chronic effects of sodium chloride or potassium chloride

    Science.gov (United States)

    Native freshwater mussels are in serious global decline and urgently need protection and conservation. Nearly 70% of the 300 species in North America are endangered, threatened, of special concern, or already extinct. The declines in the abundance and diversity of North American ...

  6. Accurate Description of Calcium Solvation in Concentrated Aqueous Solutions

    Czech Academy of Sciences Publication Activity Database

    Kohagen, Miriam; Mason, Philip E.; Jungwirth, Pavel

    2014-01-01

    Roč. 118, č. 28 (2014), s. 7902-7909. ISSN 1520-6106 R&D Projects: GA ČR GBP208/12/G016; GA MŠk LH12001 Institutional support: RVO:61388963 Keywords : calcium chloride * aqueous solution * molecular dynamics * neutron scattering Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.302, year: 2014

  7. GENETIC DIVERSITY IN ARABICA COFFEE GROWN IN POTASSIUM-CONSTRAINED ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Waldênia de Melo Moura

    2015-02-01

    Full Text Available Potassium is a source of non-renewable natural resource, and is used in large quantities in coffee fertilization through basically imported formulations in the form of potassium chloride. An alternative to make production systems more sustainable would be obtaining cultivars more efficient in the use of this nutrient. This study aimed to evaluate the genetic diversity among 20 cultivars of coffee, in conditions of low availability of potassium to identify the best combinations for composing future populations to be used in breeding programs. The experiment was arranged in a randomized block design with three replications of nutrient solution. Agronomic characteristics and efficiencies of rooting, absorption, translocation, biomass production and potassium utilization were evaluated. The clustering analysis was based on the unweighted pair group method with arithmetic mean clustering algorithm (UPGMA and canonical variables. Variability was observed for most treatments. The multivariate procedures produced similar discrimination of genotypes, with the formation of five groups. Hybridizations between the cultivar Icatu Precoce IAC 3283 with cultivars Catuaí Amarelo IAC 62, Araponga MG1, Caturra Vermelho IAC 477, Catuaí Vermelho IAC 15, Rubi MG 1192 and Catucaí 785/15, and between the cultivar Tupi IAC 1669-33 with cultivars Icatu Vermelho IAC 4045, Acaiá Cerrado MG 1474 and Oeiras MG 6851 are the most promising for obtaining segregating populations or heterotic hybrids in breeding programs aiming more efficiency in potassium utilization.

  8. Rapid determination of alkylphenols in aqueous samples by in situ acetylation and microwave-assisted headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry.

    Science.gov (United States)

    Wu, Yu-Pei; Wang, Yu-Chen; Ding, Wang-Hsien

    2012-08-01

    A rapid and solvent-free procedure for the determination of 4-tert-octylphenol and 4-nonylphenol isomers in aqueous samples is described. The method involves in-situ acetylation and microwave-assisted headspace solid-phase microextraction prior to their determination using gas chromatography-ion trap mass spectrometry operated in the selected ion storage mode. The dual experimental protocols to evaluate the effects of various derivatization and extraction parameters were investigated and the conditions optimized. Under optimized conditions, 300 μL of acetic anhydride mixed with 1 g of potassium hydrogencarbonate and 2 g of sodium chloride in a 20 mL aqueous sample were efficiently extracted by a 65 μm polydimethylsiloxane-divinylbenzene fiber that was located in the headspace when the system was microwave irradiated at 80 W for 5 min. The limits of quantitation were 5 and 50 ng/L for 4-tert-octylphenol and 4-nonylphenol isomers, respectively. The precision for these analytes, as indicated by relative standard deviations, were less than 8% for both intra- and inter-day analysis. Accuracy, expressed as the mean extraction recovery, was between 74 to 88%. A standard addition method was used to quantitate 4-tert-octylphenol and 4-nonylphenol isomers, and the concentrations ranged from 120 to 930 ng/L in various environmental water samples. PMID:22899640

  9. Quaternary (liquid + liquid) equilibria of aqueous two-phase poly (ethylene glycol), poly (DMAM-TBAM), and KH2PO4: Experimental and generalized Flory-Huggins theory

    International Nuclear Information System (INIS)

    Quaternary (liquid + liquid) equilibrium (LLE) data of the aqueous two-phase poly (ethylene glycol), poly (N,N-dimethylacrylamide-t-butylacrylamide) with abbreviation name poly (DMAM-TBAM) as a hydrophobic association water-soluble copolymer and KH2PO4 has been determined experimentally at T = 338.15 K. Furthermore, the generalized Flory-Huggins theory with two electrostatic terms (the Debye-Hueckel and Pitzer-Debye-Hueckel) was used for correlation of the phase behavior of the quaternary system and the interaction parameters between all species were calculated. It was found that addition of poly (DMAM-TBAM) copolymer as well as changing the temperature can shift the binodal curves of aqueous two-phase systems containing polyethylene glycol (PEG) and salt. Also, the phase behavior of the DMAM-TBAM copolymer with some salts containing sodium chloride, ammonium hydrogen phosphate, potassium hydrogen phosphate, and sodium carbonate were studied experimentally at T = 338.15 K and the effect of the salt type on the their binodal curves was determined

  10. IN VITRO AND IN VIVO EVALUATION OF DICLOFENAC POTASSIUM LYOPHILIZED ORALLY DISINTEGRATING TABLETS

    Directory of Open Access Journals (Sweden)

    Mir Monir Hossain*, S. M. Moazzem Hossen, Md. Shahidul Islam, T. T. Tanmy, A. Barua and J. Alam

    2013-01-01

    Full Text Available Diclofenac Potassium, a sparingly soluble non-steroidal anti-inflammatory drug, was taken as candidate for decreasing the onset of action time and increasing its bioavailability by overcoming its first pass metabolism. Diclofenac Potassium orally disintegrating tablet (ODT formulations were developed using lyophilization technique. The freeze dried tablet formulations were prepared by freeze-drying an aqueous solution of Diclofenac Potassium, matrix former, filler, and an anti-collapse. The tablets were evaluated from both compendial and non-compendial criteria (i.e. uniformity of weight, uniformity of content, friability, in vitro disintegration time, in vitro dissolution, wetting time, in vivo disintegration time, moisture analysis and scanning electron microscopy. The best formula results showed that lyophilized ODT disintegrated within few seconds and showed significantly faster in-vitro dissolution rate of Diclofenac Potassium in comparison with commercially available immediate release tablet Diclofenac Potassium tablet (Cataflam®. The in-vivo evaluation for the best formulation (LD#11 was performed in comparison with the immediate release tablet Diclofenac Potassium tablet (Cataflam® ¬¬50 mg. A randomized crossover design was adopted in the comparative bioavailability study and was done on a sample of four healthy human volunteers. Statistical analysis revealed significant difference between the Cataflam immediate release tablet and Diclofenac Potassium ODT (LD#11 regarding the following pharmacokinetic parameters: Cmax and Tmax (p 0.05. The relative bioavailability of the Diclofenac Potassium ODT (LD# 11 was 101.09% relative to the immediate release tablet (Cataflam® taken as reference product. Though a significant decrease in the time of onset of action; however no significant increase in the relative bioavailability was observed.

  11. THE METHOD OF REMOVAL YTTRIUM (III AND YTTERBIUM (III FROM DILUTE AQUEOUS SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Olga Lobacheva

    2016-04-01

    Full Text Available Yttrium (III and ytterbium (III cations ion flotation from diluted aqueous solutions in the presence of chloride ions using sodium dodecyl sulfate as collector agent were studied. Y (III and Yb (III distribution and recovery coefficients as a function of aqueous phase рН value at different sodium chloride concentrations were received. Yttrium (III and ytterbium (III chloro and hydroxo complexes instability constants were calculated. The calculation of separation coefficient at рН specified values depending on chloride ion concentration was conducted. Maximum separation coefficient was observed when chloride concentration of 0.01 M is 50 at рН 7.8. Ksep is minimal in nitrate medium ans is 3 at рН 7.0. At sodium chloride concentration of 0.05 М Ksep is 9 at рН 7.8.

  12. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  13. Potassium Intake, Bioavailability, Hypertension, and Glucose Control.

    Science.gov (United States)

    Stone, Michael S; Martyn, Lisa; Weaver, Connie M

    2016-01-01

    Potassium is an essential nutrient. It is the most abundant cation in intracellular fluid where it plays a key role in maintaining cell function. The gradient of potassium across the cell membrane determines cellular membrane potential, which is maintained in large part by the ubiquitous ion channel the sodium-potassium (Na+-K+) ATPase pump. Approximately 90% of potassium consumed (60-100 mEq) is lost in the urine, with the other 10% excreted in the stool, and a very small amount lost in sweat. Little is known about the bioavailability of potassium, especially from dietary sources. Less is understood on how bioavailability may affect health outcomes. Hypertension (HTN) is the leading cause of cardiovascular disease (CVD) and a major financial burden ($50.6 billion) to the US public health system, and has a significant impact on all-cause morbidity and mortality worldwide. The relationship between increased potassium supplementation and a decrease in HTN is relatively well understood, but the effect of increased potassium intake from dietary sources on blood pressure overall is less clear. In addition, treatment options for hypertensive individuals (e.g., thiazide diuretics) may further compound chronic disease risk via impairments in potassium utilization and glucose control. Understanding potassium bioavailability from various sources may help to reveal how specific compounds and tissues influence potassium movement, and further the understanding of its role in health. PMID:27455317

  14. Potassium Intake, Bioavailability, Hypertension, and Glucose Control

    Directory of Open Access Journals (Sweden)

    Michael S. Stone

    2016-07-01

    Full Text Available Potassium is an essential nutrient. It is the most abundant cation in intracellular fluid where it plays a key role in maintaining cell function. The gradient of potassium across the cell membrane determines cellular membrane potential, which is maintained in large part by the ubiquitous ion channel the sodium-potassium (Na+-K+ ATPase pump. Approximately 90% of potassium consumed (60–100 mEq is lost in the urine, with the other 10% excreted in the stool, and a very small amount lost in sweat. Little is known about the bioavailability of potassium, especially from dietary sources. Less is understood on how bioavailability may affect health outcomes. Hypertension (HTN is the leading cause of cardiovascular disease (CVD and a major financial burden ($50.6 billion to the US public health system, and has a significant impact on all-cause morbidity and mortality worldwide. The relationship between increased potassium supplementation and a decrease in HTN is relatively well understood, but the effect of increased potassium intake from dietary sources on blood pressure overall is less clear. In addition, treatment options for hypertensive individuals (e.g., thiazide diuretics may further compound chronic disease risk via impairments in potassium utilization and glucose control. Understanding potassium bioavailability from various sources may help to reveal how specific compounds and tissues influence potassium movement, and further the understanding of its role in health.

  15. Potassium Intake, Bioavailability, Hypertension, and Glucose Control

    Science.gov (United States)

    Stone, Michael S.; Martyn, Lisa; Weaver, Connie M.

    2016-01-01

    Potassium is an essential nutrient. It is the most abundant cation in intracellular fluid where it plays a key role in maintaining cell function. The gradient of potassium across the cell membrane determines cellular membrane potential, which is maintained in large part by the ubiquitous ion channel the sodium-potassium (Na+-K+) ATPase pump. Approximately 90% of potassium consumed (60–100 mEq) is lost in the urine, with the other 10% excreted in the stool, and a very small amount lost in sweat. Little is known about the bioavailability of potassium, especially from dietary sources. Less is understood on how bioavailability may affect health outcomes. Hypertension (HTN) is the leading cause of cardiovascular disease (CVD) and a major financial burden ($50.6 billion) to the US public health system, and has a significant impact on all-cause morbidity and mortality worldwide. The relationship between increased potassium supplementation and a decrease in HTN is relatively well understood, but the effect of increased potassium intake from dietary sources on blood pressure overall is less clear. In addition, treatment options for hypertensive individuals (e.g., thiazide diuretics) may further compound chronic disease risk via impairments in potassium utilization and glucose control. Understanding potassium bioavailability from various sources may help to reveal how specific compounds and tissues influence potassium movement, and further the understanding of its role in health. PMID:27455317

  16. Flotation isolation of uranium(6) from acidic waste waters with the use of potassium soaps of dialkylphosphinic acids

    International Nuclear Information System (INIS)

    The applicability of potassium soaps of dialkylphosphinic acids of R2POOH type where R is C3-C10 hydrocarbon radical as uranium flotation collectors is investigated. Under similar conditions the degree of uranium flotation isolation from nitrate solutions is notably higher than from chloride solutions, and from the latter is higher than from sulfate solutions. The method of uranium flotation isolation using dialkylphosphinic acid soaps was tested in synthetic solutions simulating acid (pH = 2-5) waste waters. Possibility of flotation method to isolate 95-99% of uranium from acid solutions using potassium soaps of dialkylphosphinic acids is demonstrated

  17. Electrodialysis recovery of boric acid and potassium hydroxide from eluates of SWC facilities at NPP with VVER

    International Nuclear Information System (INIS)

    To extract boric acid and potassium hydroxide from regenerates of SWC-2-46 facilities, an electrodialysis-sorption process has been devised consisting of the following operations: separation of boron-alkaline regenerate solution into desorbate and wash water; filling of desalination and concentration chambers, respectively, with desorbate and was water of electrodialysis equipment; production of boric acid and potassium hydroxide from desorbate by electrodialysis; removal of chloride-ion from boric acid solution on ion-exchange filter AB-17-18. The flow-sheet was tested and boron containing alkaline regeneration solutions were recovered from Novovoronezh NPP

  18. Sodium chloride aerosol generation method for high efficiency particulate air filter testing

    International Nuclear Information System (INIS)

    A method for submicron aerosol generation from aqueous sodium chloride solutions is presented. The results are discussed with regard to generation capacity and aerosol particle characterization as a function of the experimental conditions, especially of the flow rate of compressed air through the nozzle, of changes of the NaCl concentration and of the nozzle diameter. (author)

  19. Oxalyl chloride as a practical carbon monoxide source for carbonylation reactions

    DEFF Research Database (Denmark)

    Hansen, Steffen V F; Ulven, Trond

    2015-01-01

    A method for generation of high-quality carbon monoxide by decomposition of oxalyl chloride in an aqueous hydroxide solution is described. The usefulness of the method is demonstrated in the synthesis of heterocycles and for hydroxy-, alkoxy-, amino-, and reductive carbonylation reactions, in sev...

  20. Experimental study of concentrated solutions containing sodium and chloride pollutants in SG flow restricted areas

    Energy Technology Data Exchange (ETDEWEB)

    You, D.; Lefefre, S.; Feron, D. [CEA-Saclay, Lab. d' Etude de la Corrosion Aqueuse, Gif-sur-Yvette (France); Vaillant, F. [EDF-Les Renardieres - DRD/EMA, Moret-sur-Loing (France)

    2002-07-01

    In steam generators, the hideout processes occur in flow restricted areas. Non volatile pollutants, i.e. species less soluble in the vapour phase than in the liquid water phase, accumulate such as sodium hydroxide or sodium chloride. The thermodynamic equilibrium between these two phases is described in terms of liquid-vapour equilibrium constants for soluble species and boiling constant for the solvent. The presented experimental investigation has been realised with the EVA device: the boiling pressure evolution has been measured during the hideout process of sodium hydroxide and sodium chloride aqueous solutions. The results clearly demonstrated that high sodium hydroxide aqueous solutions are thermodynamically possible while with sodium chloride, it seems that precipitation occurs before. (authors)

  1. Experimental study of concentrated solutions containing sodium and chloride pollutants in SG flow restricted areas

    International Nuclear Information System (INIS)

    In steam generators, the hideout processes occur in flow restricted areas. Non volatile pollutants, i.e. species less soluble in the vapour phase than in the liquid water phase, accumulate such as sodium hydroxide or sodium chloride. The thermodynamic equilibrium between these two phases is described in terms of liquid-vapour equilibrium constants for soluble species and boiling constant for the solvent. The presented experimental investigation has been realised with the EVA device: the boiling pressure evolution has been measured during the hideout process of sodium hydroxide and sodium chloride aqueous solutions. The results clearly demonstrated that high sodium hydroxide aqueous solutions are thermodynamically possible while with sodium chloride, it seems that precipitation occurs before. (authors)

  2. Extraction of potassium from K-feldspar via the CaCl2 calcination route☆

    Institute of Scientific and Technical Information of China (English)

    Bo Yuan; Chun Li; Bin Liang; Li Lü; Hairong Yue; Haoyi Sheng; Longpo Ye; Heping Xie

    2015-01-01

    The extraction of potassium from K-feldspar via a calcium chloride calcination route was studied with a focus on the effects of the calcination atmosphere, calcination temperature and time, mass ratio of CaCl2 to K-feldspar ore and particle size of the K-feldspar ore. The results demonstrated that a competing high-temperature hydrolysis reaction of calcium chloride with moisture in a damp atmosphere occurred concurrently with the conversion reaction of K-feldspar with CaCl2, thus reducing the amount of potassium extracted. The conversion reaction started at approximately 600 °C and accelerated with increasing temperature. When the temperature rose above 900 °C, the extraction of potassium gradually decreased due to the volatilization of the product, KCl. As much as approximately 41%of the potassium was volatilized in 40 min at 1100 °C. The mass ratio of CaCl2/K-feldspar ore significantly affected the extraction. At a mass ratio of 1.15 and 900 °C, the potassium extraction reached 91%in 40 min, while the extraction was reduced to only 22%at the theoretical mass ratio of 0.2. Optimal process conditions are as follows:ore particle size of 50–75μm, tablet forming pressure of 3 MPa, dry nitrogen atmosphere, mass ratio of CaCl2/ore 1.15:1, calcination temperature of 900 °C, and calcination time of 40 min. The XRD analysis revealed that a complex phase transition of the product SiO2 was also accompanied by the con-version reaction of K-feldspar/CaCl2. The SiO2 product formed at the initial stage was in the quartz phase at 900 °C and was gradually transformed into cristobalite after 30 min.

  3. Effect of potassium and hypomagnesemia on insulin in the bovine

    Energy Technology Data Exchange (ETDEWEB)

    Lentz, D.E.; Madsen, F.C.; Miller, J.K.; Hansard, S.L.

    1976-01-01

    Grass tetany in cattle has been associated with the consumption of early spring forages high in potassium (K) and low in magnesium (Mg). Alterations in serum Mg and K may affect intermediary carbohydrate metabolism, resulting in hypoglycemia and ketosis that often accompany grass tetany. We investigated these interrelationships by infusing potassium chloride (KCl) intravenously in normal (plasma Mg greater than 2.1 mg/100 ml) and Mg-deficient (plasma Mg less than .7 mg/100 ml) 9-month-old Holstein bull calves and intraruminally into nonpregnant, nonlactating Holstein cows. Plasma levels of both K and immunoreactive insulin (IRI) were elevated (P less than .01) by 1.14, 2, and 3 percent KCl (51, 64, and 135 mg K/kg) in calves and by 550 g KCl (440 mg K/kg body weight) in cows. Plasma K was lower (P less than .01) and IRI higher (P less than .01) in Mg-deficient calves than in normal calves during 2 percent KCl infusion. These results suggest that prolonged elevation of K and insulin in ruminants could lead to a series of metabolic disturbances that may play an important role in the etiology of grass tetany.

  4. Preparation of cationic polyacrylamide by aqueous two-phase polymerization

    Directory of Open Access Journals (Sweden)

    2010-05-01

    Full Text Available Cationic polyacrylamide (CPAM was synthesized by aqueous two-phase polymerization technique using acrylamide (AM and dimethylaminoethyl methacrylate methyl chloride (DMC as raw materials, aqueous polyethylene glycol 20000 (PEG 20000 solution as dispersant, 2,2′-azobis(2-amidinopropane dihydrochloride (V-50 as initiator and poly(dimethylaminoethyl methacrylate methyl chloride (PDMC as stabilizer. The polymer was characterized by infrared (IR spectroscopy, 1H-NMR spectrum and transmission electron microscopy (TEM. The copolymer composition was analyzed. The effect of monomers concentration, PEG 20000 concentration and stabilizer concentration on copolymer were investigated, respectively. The optimum reaction conditions for obtaining a stable CPAM aqueous two-phase system were monomers concentration 8~15%, PEG 20000 concentration 15~25%, and PDMC concentration 0.5~1.5%. Finally, the formation process of copolymer particles was investigated by optical microscope.

  5. Phase equilibria for the ionic semiclathrate hydrate formed with tetrabutylphosphonium chloride plus CO2, CH4, or N2

    International Nuclear Information System (INIS)

    Highlights: • Hydrate phase equilibria for CO2, CH4, or N2 + tetrabutylphosphonium chloride. • Range of the equilibrium temperature is from (283.0 to 291.8) K. • The mass fraction of tetrabutylphosphonium chloride aqueous solution is 0.36. • Tetrabutylphosphonium chloride moderated phase equilibrium of CO2, CH4 or N2 hydrate at least 8 K. • The gas separation performance in tetrabutylphosphonium chloride hydrate systems. -- Abstract: This paper presents the phase equilibrium conditions for the semiclathrate hydrates in the systems of (CO2, CH4 or N2 + tetrabutylphosphonium chloride + water). The experiments were performed by isochoric method within the range of temperature from (283.0 to 291.8) K and pressure from (0.19 to 5.02) MPa with mass fraction of tetrabutylphosphonium chloride aqueous solution 0.36. The presence of tetrabutylphosphonium chloride increases the phase equilibrium temperatures of CO2, CH4 or N2 hydrates by at least 8 K at a given pressure. The gas separation performance in tetrabutylphosphonium chloride hydrate systems was compared with that in other semiclathrate hydrate systems, based on the measured phase equilibrium conditions

  6. Is the Hexacyanoferrate(II) Anion Stable in Aqueous Solution? A Combined Theoretical and Experimental Study.

    Science.gov (United States)

    Tirler, Andreas O; Persson, Ingmar; Hofer, Thomas S; Rode, Bernd M

    2015-11-01

    A combined theoretical and experimental study was performed to elucidate the structural and dynamical properties of the isolated aqueous hexacyanoferrate(II) ion as well as in the presence of potassium counterions. It is shown that in absence of counterions, the highly negatively charged hexacyanoferrate(II) complex is not stable in aqueous solution. However, if the high negative charge is compensated by potassium counterions, a stable complex is observed, which is proven by theoretical simulations as well as by extended X-ray absorption fine structure (EXAFS) experiments. From the simulation it is found that potassium ions surrounding the complex are highly mobile and thus cannot be observed via EXAFS experiments. The structure of aqueous hexacyanoferrate(II) in the presence of potassium ions is identical to that of the solid-state structure, but the mobility of potassium ions is significantly increased in the liquid. These highly mobile potassium ions circulating the complex are the reason for the very short lifetime of hydrogen bonds between solvent water molecules and cyanide ligands being on the femtosecond scale. PMID:26457967

  7. Interphase distribution of plutonium and strontium in chloride melts in the presence of oxide phases

    International Nuclear Information System (INIS)

    Interphase distribution of plutonium and strontium in the eutectic melt of sodium and potassium chlorides at the 1023 and 1173 K temperature in the presence of solids La2O3 and ZrO2 has been studied to develop the methods for actinoid and fragment element separation by extraction of solid phase elements from molten salts. It is established that 0.5 g of La2O3 during an hour practically extracts the whole plutonium from the salt phase. Under similar conditions ZrO2 extracts plutonium slightly worse. It is shown that the nature of the halogen melt doesn't influence on plutonium and strontium distribution. La2O3 may extract plutonium and americium both from fluoride and chloride melts, and ZrO2 may extract only plutonium. Alkaline and alkaline-earth fragment elements (Cs, Sr) are not extracted by these oxides from chloride melts

  8. Replacement of salt by a novel potassium- and magnesium-enriched salt alternative improves the cardiovascular effects of ramipril.

    OpenAIRE

    Mervaala, E. M.; Paakkari, I.; Laakso, J; Nevala, R.; Teräväinen, T. M.; Fyhrquist, F; Vapaatalo, H.; Karppanen, H.

    1994-01-01

    1. The influence of salt (sodium chloride; NaCl) (an additional 6% in the diet) and that of a novel sodium-reduced, potassium-, magnesium-, and L-lysine-enriched salt alternative on the cardiovascular effects of ramipril was studied in stroke-prone spontaneously hypertensive rats in a 6-week study. The intake of sodium chloride was adjusted to the same level by adding the salt alternative at a 1.75 times higher amount than regular salt. 2. Salt produced a marked rise in blood pressure and ind...

  9. Ultratrace potassium determination in plutonium oxide

    International Nuclear Information System (INIS)

    A new method improving the detection limit for potassium in plutonium oxide samples in a high acid matrix was developed. Ultratrace detection limits (sub parts per million) for potassium in plutonium oxide digestate were achieved by optimizing several instrument parameters. Using the Horiba Jobin-Yvon Ultima 2 ICP-AES spectrometer different settings and conditions were examined to improve the detection limit for potassium. The optimized parameters of 0.875 L min-1 sheath gas flow, 20/80 µm entrance/exit slit, 8 s MAX mode signal integration, and blank subtraction were able to lower the potassium reporting limit to 10 ng mL-1. (author)

  10. Efficient acetylation of primary amines and amino acids in environmentally benign brine solution using acetyl chloride

    Indian Academy of Sciences (India)

    Kaushik Basu; Suchandra Chakraborty; Achintya Kumar Sarkar; Chandan Saha

    2013-05-01

    Acetyl chloride is one of the most commonly available and cheap acylating agent but its high reactivity and concomitant instability in water precludes its use to carry out acetylation in aqueous medium. The present methodology illustrates the efficient acetylation of primary amines and amino acids in brine solution by means of acetyl chloride under weakly basic condition in the presence of sodium acetate and/or triethyl amine followed by trituration with aqueous saturated bicarbonate solution. This effort represents the first efficient use of this most reactive but cheap acetylating agent to acetylate amines in excellent yields in aqueous medium. This is a potentially useful green chemical transformation where reaction takes place in environment-friendly brine solution leading to easy work-up and isolation of the amide derivatives. Mechanistic rationale of this methodology is also important.

  11. Extraction of copper(II) and zinc(II) from chloride media with mixed extractants

    International Nuclear Information System (INIS)

    Extraction of copper(II) and zinc(II) from acidic chloride solutions with mixtures of two extractants: a basic or solvating one and a chelating extractant was discussed. Processes for recovery and separation of Cu(II) from Zn(II) were proposed, which consist of the following steps: extraction from chloride media with the formation of metal chlorocomplex ion pair or solvate, scrubbing of chloride ions with an aqueous solution of appropriate pH with simultaneous transfer of the metal ion to the chelate, traditional stripping with sulphuric acid and conditioning of the basic extractant. Both effective recovery and separation of metal ions with simultaneous change of the system from the chloride to the sulphate state can be achieved. A bifunctional reagent, such as alkyl derivative of 8-hydroxyquinoline, can be also used instead of the extractant mixture. (author)

  12. Extractant of copper(II) and zinc(II) from chloride media with mixed extractants

    International Nuclear Information System (INIS)

    Extraction of copper(II) and zinc(II) from acidic chloride solutions with mixtures of two extractants: a basic or solvating one and a chelating extractant was discussed. The processes for recovery and separation of Cu(II) from Zn(II) were proposed. The processes consist of the following steps: extraction from chloride media with the formation of metal chloro-complex ion pair or solvate, scrubbing of chloride ions with an aqueous solution of appropriate pH with simultaneous transfer of the metal ion to the chelate, traditional stripping with sulphuric acid and conditioning of the basic extractant. Both effective recovery and separation of metal ions with simultaneous change of the system from the chloride to sulphate one can be achieved. A bifunctional reagent, such as alkyl-derivative of 8-hydroxyquinoline, can be also used instead of the extractant mixture. (authors)

  13. Chloride in vesicular trafficking and function.

    Science.gov (United States)

    Stauber, Tobias; Jentsch, Thomas J

    2013-01-01

    Luminal acidification is of pivotal importance for the physiology of the secretory and endocytic pathways and its diverse trafficking events. Acidification by the proton-pumping V-ATPase requires charge compensation by counterion currents that are commonly attributed to chloride. The molecular identification of intracellular chloride transporters and the improvement of methodologies for measuring intraorganellar pH and chloride have facilitated the investigation of the physiology of vesicular chloride transport. New data question the requirement of chloride for pH regulation of various organelles and furthermore ascribe functions to chloride that are beyond merely electrically shunting the proton pump. This review surveys the currently established and proposed intracellular chloride transporters and gives an overview of membrane-trafficking steps that are affected by the perturbation of chloride transport. Finally, potential mechanisms of membrane-trafficking modulation by chloride are discussed and put into the context of organellar ion homeostasis in general. PMID:23092411

  14. Stability of succinylcholine chloride injection.

    Science.gov (United States)

    Schmutz, C W; Mühlebach, S F

    1991-03-01

    The stability of succinylcholine chloride injection prepared by a hospital pharmacy was studied under a wide variety of conditions. Batches of succinylcholine chloride injection 10 mg/mL containing sodium chloride, methyl-4-hydroxybenzoate, hydrochloric acid, and water were prepared. Samples were tested for the effect of initial pH (3.0 and 4.2) and sterilization (steam treatment at 100 degrees C for 30 minutes and 121 degrees C for 20 minutes) on stability after three weeks; long-term stability under refrigeration (12, 17, and 23 months of storage at 4 degrees C); and the effect of storage temperature (4-6 degrees C, 20-26 degrees C, 35 degrees C, and 70 degrees C) and light exposure at various intervals up to 12 months. Samples were analyzed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Unlike heating at 121 degrees C, heating at 100 degrees C produced no significant loss of succinylcholine chloride, independent of the initial pH. Succinylcholine chloride was hydrolyzed only minimally over 23 months if the solution was stored at 4-6 degrees C. A 10% loss of drug content occurred if solutions were kept at 20-26 degrees C for five months, at 35 degrees C for one month, or at 70 degrees C for one day. Initial degradation was slowed if the solution was protected from light. The assessments by TLC proved to be more sensitive than the HPLC measurements. Succinylcholine chloride injection sterilized at 100 degrees C for 30 minutes can be stored for up to five months at room temperature if protected from light. The preparation is stable for at least two years under refrigeration. PMID:2028996

  15. Chloride binding of cement-based materials subjected to external chloride environment - A review

    OpenAIRE

    Yuan, Q.; Shi, C; Schutter, G. de; Audenaert, K.; Deng, D.

    2009-01-01

    This paper reviews the chloride binding of cement-based materials subjected to external chloride environments. Chloride ion exist either in the pore solution, chemically bound to the hydration products, or physically held to the surface of the hydration products. Chloride binding of cement-based material is very complicated and influenced by many factors, such as chloride concentration, cement composition, hydroxyl concentration, cation of chloride salt, temperature, supplementary cementing m...

  16. Soil chemical properties as affected by plant derived ash to replace potassium fertilizer and its conversion value

    OpenAIRE

    John Bako Baon; Sugiyanto Sugiyanto

    2011-01-01

    Potassium chloride (KCl) presently used as main source of K, tends to become more expensive, therefore, there is a need for a breakthrough in finding alternative materials to replace KCl. The aim of this paper is to present recent research on the use of plant derived ash to replace KCl fertilizer, especially in relation with soil chemical characteristics and its conversion value. Plant derived ash coming from palm sugar processing unit which use farm waste as main fuel was used in this experi...

  17. Inhibition of Chloride Induced Crevice Corrosion in Alloy 22 by Fluoride Ions

    Energy Technology Data Exchange (ETDEWEB)

    Carranza, R M; Rodr?guez, M A; Rebak, R B

    2005-10-09

    Alloy 22 (N06022) is highly resistant to localized corrosion. Alloy 22 may be susceptible to crevice corrosion in pure chloride (Cl{sup -}) solutions under aggressive environmental conditions. The effect of the fluoride (F{sup -}) over the crevice corrosion induced by chloride ions is still not well established. The objective of the present work was to explore the crevice corrosion resistance of this alloy to different mixtures of fluorides and chlorides. Cyclic potentiodynamic polarization (CPP) tests were conducted in deaerated aqueous solutions of pure halide ions and also in different mixtures of chloride and fluoride at 90 C and pH 6. The range of chloride concentration [Cl{sup -}] was 0.001 M {le} [Cl{sup -}] {le} 1 M and the range of molar fluoride to chloride ratio [F{sup -}]/[Cl{sup -}] was 0.1 {le} [F{sup -}]/[Cl{sup -}] {le} 10. Results showed that Alloy 22 was susceptible to crevice corrosion in all the pure chloride solutions but not in the pure fluoride solutions. Fluoride ions showed an inhibitor behavior only in mixtures with a molar ratio [F{sup -}]/[Cl{sup -}] > 2. For mixtures with a molar ratio [F{sup -}]/[Cl{sup -}] of 7 and 10 the inhibition of crevice corrosion was complete.

  18. Crevice corrosion of alloy 22 in fluoride and chloride containing solutions

    International Nuclear Information System (INIS)

    Alloy 22 (N06022) is highly resistant to localized corrosion. Alloy 22 may be susceptible to crevice corrosion in pure chloride (Cl-) solutions under aggressive environmental conditions. The effect of the fluoride (F-) on the susceptibility to crevice corrosion induced by chloride ions is still not well established. The objective of the present work was to explore the crevice corrosion resistance of this alloy to different mixtures of fluorides and chlorides. Cyclic potentiodynamic polarization (CPP) tests were conducted in deaerated aqueous solutions of pure halide ions and also in different mixtures of chloride and fluoride at 90 C degrees and pH 6. The range of chloride concentration [Cl-] was 0.001 M ≤ [Cl-] ≤ 1 M and the range of molar fluoride to chloride ratio [F-]/[Cl-] was 0.1≤ [F-]/[Cl-] ≤ 10. Results showed that Alloy 22 was susceptible to crevice corrosion in all the pure chloride solutions but not in the pure fluoride solutions. A molar ratio [F-]/[Cl-] ranging from 5 to 10 was required for the inhibition of crevice corrosion to be complete in the halide mixtures. A moderate or nil inhibitive effect was observed for molar ratios [F-]/[Cl-] < 5. (author)

  19. Simultaneous Separation of Manganese, Cobalt, and Nickel by the Organic-Aqueous-Aqueous Three-Phase Solvent Extraction

    Science.gov (United States)

    Shirayama, Sakae; Uda, Tetsuya

    2016-04-01

    This research outlines an organic-aqueous-aqueous three-phase solvent extraction method and proposes its use in a new metal separation process for the recycling of manganese (Mn), cobalt (Co), and nickel (Ni) from used lithium ion batteries (LIBs). The three-phase system was formed by mixing xylene organic solution, 50 pct polyethylene glycol (PEG) aqueous solution, and 1 mol L-1 sodium sulfate (Na2SO4) aqueous solution. The xylene organic solution contained 2-ethylhexylphosphonic acid (D2EHPA) as an extractant for Mn ion, and the Na2SO4 aqueous solution contained 1 mol L-1 potassium thiocyanate (KSCN) as an extractant for Co ion. Concentrations of the metal ions were varied by dissolving metal sulfates in the Na2SO4 aqueous solution. As a result of the experiments, Mn, Co, and Ni ions were distributed in the xylene organic phase, PEG-rich aqueous phase, and Na2SO4-rich aqueous phase, respectively. The separation was effective when the pH value was around 4. Numerical simulation was also conducted in order to predict the distribution of metal ions after the multi-stage counter-current extractions.

  20. Phytoextraction of chloride from a cement kiln dust (CKD) contaminated landfill with Phragmites australis.

    Science.gov (United States)

    McSorley, Kaitlin; Rutter, Allison; Cumming, Robert; Zeeb, Barbara A

    2016-05-01

    Cement kiln dust (CKD) is a globally produced by-product from cement manufacturing that is stockpiled or landfilled. Elevated concentrations of chloride pose toxic threats to plants and aquatic communities, as the anion is highly mobile in water and can leach into surrounding water sources. Re-vegetation and in situ phytoextraction of chloride from a CKD landfill in Bath, ON, Canada, was investigated with the resident invasive species Phragmites australis (haplotype M). Existing stands of P. australis were transplanted from the perimeter of the site into the highest areas of contamination (5.9×10(3)μg/g). Accumulation in the shoots of P. australis was quantified over one growing season by collecting samples from the site on a bi-weekly basis and analyzing for chloride. Concentrations decreased significantly from early May (24±2.2×10(3)μg/g) until mid-June (15±2.5×10(3)μg/g), and then remained stable from June to August. Shoot chloride accumulation was not significantly affected by water level fluctuations at the site, however elevated potassium concentrations in the soil may have contributed to uptake. Based on shoot chloride accumulation and total biomass, it was determined that phytoextraction from the CKD landfill can remove 65±4kg/km(2) of chloride per season. Based on this extraction rate, removal of chloride present in the highly contaminated top 10cm of soil can be achieved in 3-9years. This is the first study to apply phytotechnologies at a CKD landfill, and to successfully demonstrate in situ phytoextraction of chloride. PMID:26597371

  1. Rare, severe hypersensitivity reaction to potassium iodide

    DEFF Research Database (Denmark)

    Nielsen, Anne Sofie Korsholm; Ebbehøj, Eva; Richelsen, Bjørn

    2014-01-01

    The literature reports a large variety of adverse reactions to potassium iodide. A severe hypersensitivity reaction to potassium iodide in a 51-year-old woman with Graves' thyrotoxicosis is described. Following administration the patient developed sialadenitis, conjunctivitis, stomatitis and acne...

  2. Neutron diffraction studies of potassium thiocyanate

    International Nuclear Information System (INIS)

    Measurements of some low frequency phonon dispersion curves in potassium thiocyanate have been made using inelastic neutron scattering techniques. Elastic neutron powder diffraction measurements have also been made on potassium thiocyanate to resolve discrepancies in the literature concerning its structure. (author) 11 refs., 6 figs., 1 tab

  3. 21 CFR 184.1643 - Potassium sulfate.

    Science.gov (United States)

    2010-04-01

    ... hydroxide or potassium carbonate. (b) The ingredient meets the specifications of the “Food Chemicals Codex... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium sulfate. 184.1643 Section 184.1643 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  4. Status of potassium permanganate label claim - 2007

    Science.gov (United States)

    A brief overview of the Technical Sections completed and being worked on for the New Animal Drug Application (NADA) for potassium permanganate will be presented. Various aspects of these technical sections will be open for discussion. Potassium Permanganate Initial Label Claim (Columnaris on cat...

  5. 75 FR 23298 - Potassium Permanganate From China

    Science.gov (United States)

    2010-05-03

    ... potassium permanganate from China (70 FR 35630). The Commission is now conducting a third review to... permanganate from China (64 FR 66166). Following second five-year reviews by Commerce and the Commission... COMMISSION Potassium Permanganate From China AGENCY: United States International Trade Commission....

  6. Effects of potassium and nitrogen groundwater pollution on the migration of cesium-137 through the geological environment

    International Nuclear Information System (INIS)

    Effects of potassium and nitrogen groundwater pollution on the migration of cesium-137 through the geological environment were studied for the territories of Russia, Ukraine, Belarus. Migration rate of cesium-137 deposited as a result of the Chernobyl accident increases in geologic media (soils, rocks, and groundwater) polluted by potassium and ammonium originating from long-term fertilizers use. This effect manifests itself in the fact that radiocesium penetrates deeper into soils of arable lands than it does into virgin soils. Laboratory experiments show the sorption capacity of sandy soils with respect to cesium-137 is 2.5-9.2 times lower in the presence of solutions of chlorides and nitrates of potassium and ammonium and is 1.3-2.0 times lower in the presence of sodium nitrate solution. 26 refs.; 2 figs

  7. A survey of Io's potassium cloud

    Science.gov (United States)

    Trafton, L.

    1981-08-01

    Io's potassium cloud exhibits spatial and temporal variations similar to those observed for Io's sodium cloud. Spectra from five apparitions show that the potassium cloud is elongated so that it extends forward from Io's leading, inner hemisphere and makes an angle with Io's orbit of 10-30 deg, slightly less than the angle for the sodium cloud. The potassium cloud is a long-lived phenomenon which undergoes periodic fluctuations in response to solar radiation pressure and the ionizing influence of Jupiter's plasma torus. These give rise to east-west and north-south asymmetry variations similar to those observed for the sodium cloud. Evidence for temporary jets of potassium streaming from Io have also been observed. These similarities with the sodium cloud suggest that both sodium and potassium are ejected from nearly the same regions of Io by the same physical mechanism.

  8. Extracellular potassium inhibits Kv7.1 potassium channels by stabilizing an inactivated state

    DEFF Research Database (Denmark)

    Larsen, Anders Peter; Steffensen, Annette Buur; Grunnet, Morten; Olesen, Søren-Peter

    2011-01-01

    Kv7.1 (KCNQ1) channels are regulators of several physiological processes including vasodilatation, repolarization of cardiomyocytes, and control of secretory processes. A number of Kv7.1 pore mutants are sensitive to extracellular potassium. We hypothesized that extracellular potassium also...... modulates wild-type Kv7.1 channels. The Kv7.1 currents were measured in Xenopus laevis oocytes at different concentrations of extracellular potassium (1-50 mM). As extracellular potassium was elevated, Kv7.1 currents were reduced significantly more than expected from theoretical calculations based on the...... Goldman-Hodgkin-Katz flux equation. Potassium inhibited the steady-state current with an IC(50) of 6.0 ± 0.2 mM. Analysis of tail-currents showed that potassium increased the fraction of channels in the inactivated state. Similarly, the recovery from inactivation was slowed by potassium, suggesting that...

  9. Effects of VA mycorrhizas fungus on phosphorus and potassium uptake in tea seedlings

    International Nuclear Information System (INIS)

    Tea (Camellia sinensis) seeds were sown on sterilized acidic yellow soil (pH 5.6) in a pot experiment and treated as follows: 1) inoculated with VA mycorrhizas fungus (Glomus citricolum), 2) nonmycorrhizal as control, top dressed with 32P-single superphosphate (M-32P) and 86Rb-rubidium chloride (M-86Rb). The results showed that the percentage of VA mycorrhizas infection was 52.6% for M-32P and 56.7% for M-86Rb. Plant height, dry weight and the uptake of phosphorus and potassium were 2.1 and 1.8 times, 2.4 and 2.5 times, 5.6 and 4.1 times as that of control respectively. The utilization rate of phosphorus and potassium were raised by 14.10% and 17.13% respectively

  10. Calculation of potassium critical temperature

    International Nuclear Information System (INIS)

    The paper describes the algorithm of the functional prediction which is based on the selforganization of nonlinear algebraic models. The calculation procedure includes the module for the recognition of the dependence type hitch allows to restrict the number of choice of the prediction functions at the each step of the model building. The characteristic property of this algorithm is bootstrap method application as the external criteria of the selforganization. The calculation module is built using APL*PLUS and the user-friendly interface is implemented using Clipper 5.01 under Windows control. When using the algorithm and the programs, the critical point of potassium has been predicted on the base of the solubility curves of liquid and steam. 9 refs.; 1 fig.; 1 tab

  11. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  12. Effect of magnesium chloride on growth, crystalline perfection, structural, optical, thermal and NLO behavior of {gamma}-glycine crystals

    Energy Technology Data Exchange (ETDEWEB)

    Dillip, G.R. [Department of Physics, Sri Venkateswara University, Tirupati 517 502 (India); Bhagavannarayana, G. [Materials Characterization Division, CSIR-National Physical Laboratory, New Delhi 110 012 (India); Raghavaiah, P. [School of Chemistry, University of Hyderabad, Hyderabad 500 046 (India); Deva Prasad Raju, B., E-mail: drdevaprasadraju@gmail.com [Department of Future Studies, Sri Venkateswara University, Tirupati 517 502 (India)

    2012-05-15

    Highlights: Black-Right-Pointing-Pointer Highly nonlinear optical single crystal of {gamma}-glycine grown at room temperature from magnesium chloride aqueous solution by using slow evaporation technique has not been reported. Black-Right-Pointing-Pointer The SHG efficiency of the titled compound was estimated as 6 times higher than that of KDP. Black-Right-Pointing-Pointer The crystalline perfection of the grown crystal has been analyzed. Black-Right-Pointing-Pointer Optical constants of the {gamma}-glycine crystal were calculated. Black-Right-Pointing-Pointer The concentration of Mg element present in the grown crystal was determined by ICP-OES analysis. - Abstract: In the present study, single crystals of {gamma}-glycine possessing excellent non-linear optical properties were successfully grown at room temperature in the presence of magnesium chloride (MgCl{sub 2}) for the first time by using the slow solvent evaporation method. The second harmonic conversion efficiency of {gamma}-glycine crystal was determined using Kurtz powder technique with Nd:YAG laser and was found to be 6 times greater than that of the standard inorganic sample potassium dihydrogen phosphate (KDP). The crystalline perfection of the grown crystal was analyzed using high-resolution X-ray diffraction (HRXRD) rocking curve measurements. The grown crystal was subjected to single crystal XRD and powder XRD, which confirmed that the crystal has hexagonal structure and belongs to space group P3{sub 1}. Inductively coupled plasma optical emission spectrometry (ICP-OES) was carried out to quantify the concentration of Mg element in the grown {gamma}-glycine single crystal. Fourier transform infrared (FTIR) spectral studies were made to identify the functional groups. The optical band gap was likewise estimated for {gamma}-glycine crystal using UV-vis-NIR study. The optical measurements of {gamma}-glycine crystal helped to calculate the optical constants such as refractive index (n), the extinction

  13. Aqueous Corrosion Characteristics of Nickel Aluminides

    International Nuclear Information System (INIS)

    The aqueous corrosion characteristics of three nickel aluminides were studied by using (a) immersion corrosion test and (b) cyclic anodic polarization measurements. The immersion tests were conducted in 15 different solutions at 25 .deg. C and 95 .deg. C. The nickel aluminides were found to have good corrosion resistance in inorganic acids, organic acids and basic solutions 25 .deg. C except at a higher concentration of hydrochloric acid in ferric chloride solution at the temperature. All three nickel aluminides were suitably resistant to corrosion in the organic acids (oxalic acid, acetic acid), sodium chloride solution, and bases (sodium hydoxide, ammonium hydroxide) at 95 .deg. C. The cyclic anodic polarization curves were developed in N2-deaerated solution at 25 .deg. C and 95 .deg. C. In addition, open-circuit corrosion potentials were determined for the solutions in the aerated condition at 25 .deg. C to compare with the anodic curves. At 25 .deg. C, although all materials exhibited active-passive behavior in all solutions except the hydrofluoric acid, at Ecorr(aerated), passive corrosion was only indicated for the acetic acid, sodium hydroxide, and sodium chloride solutions. Nevertheless, in all cases, the predicted dissolution rates were consistent with immersion test results. Hysteresis loops indicating susceptibility to localized corrosion were observed in 0.6M sodium chloride(pH=7) solution. At 95 .deg. C, active-passive behavior was demonstrated in the acetic acid, sodium chloride, and to a limited extent in the nitric acid: but only active behavior was shown in the sulfuric and hydrofluoric acids. From the above results, it was noted that anodic dissolution of nickel aluminides significantly increased with increasing temperature and that the Cr-containing compositions had better corrosion resistance in several solutions than the Cr-free composition. Prior manufacturing procedures, i.e., casting and powder metallurgy processes did not appear to

  14. Enhanced expression of potassium-chloride cotransporter KCC2 in human temporal lobe epilepsy

    DEFF Research Database (Denmark)

    Karlócai, Mária R; Wittner, Lucia; Tóth, Kinga;

    2016-01-01

    volume. Using immunocytochemistry, we examined the cellular and subcellular levels of KCC2 in surgically removed hippocampi of temporal lobe epilepsy (TLE) patients and compared them to control human tissue. We also studied the distribution of KCC2 in a pilocarpine mouse model of epilepsy. An overall...... increase in KCC2-expression was found in epilepsy and confirmed by Western blots. The cellular and subcellular distributions in control mouse and human samples were largely similar; moreover, changes affecting KCC2-expression were also alike in chronic epileptic human and mouse hippocampi. At the...

  15. Two-dimensional high spatial-resolution dosimeter using europium doped potassium chloride: a feasibility study

    International Nuclear Information System (INIS)

    Recent research has shown that KCl:Eu2+ has great potential for use in megavoltage radiation therapy dosimetry because this material exhibits excellent storage performance and is reusable due to strong radiation hardness. This work reports the authors’ attempts to fabricate 2D KCl:Eu2+ storage phosphor films (SPFs) using both a physical vapor deposition (PVD) method and a tape casting method. X-ray diffraction analysis showed that a 10 µm thick PVD sample was composed of highly crystalline KCl. No additional phases were observed, suggesting that the europium activator had been completely incorporated into the KCl matrix. Photostimulated luminescence and photoluminescence spectra suggested that F (Cl−) centers were the electron storage centers post x-ray irradiation and that Eu2+ cations acted as luminescence centers in the photostimulation process. The 150 µm thick casted KCl:Eu2+ SPF showed sub-millimeter spatial-resolution. Monte Carlo simulations further demonstrated that the admixture of 20% KCl:Eu2+ and 80% low Z polymer binder exhibited almost no energy-dependence in a 6 MV beam. KCl:Eu2+ pellet samples showed a large dynamic range from 0.01 cGy to 60 Gy dose-to-water, and saturated at approximately 500 Gy as a result of KCl's intrinsic high radiation hardness. Taken together, this work provides strong evidence that KCl:Eu2+-based SPF with associated readout apparatus could result in a novel electronic film system that has all the desirable features associated with classic radiographic film and, importantly, water equivalence and the capability of permanent identification of each detector. (paper)

  16. Linear attenuation (or absorption) coefficient of gamma radiation for dilute solutions of potassium chloride

    International Nuclear Information System (INIS)

    The mass attenuation and energy absorption coefficients are basic quantities used in calculations of photon energy transport and deposition for radiation dosimetry. This report describes a study of the concentration dependence of the attenuation of γ radiation of various energies by KCl solutions of different concentration. (author)

  17. Purinergic facilitation of ATP-sensitive potassium current in rat ventricular myocytes

    OpenAIRE

    Babenko, Andrey P.; Vassort, Guy

    1997-01-01

    The effects of different purinergic agonists on the cardiac adenosine 5′-triphosphate (ATP)-sensitive potassium current (IK(ATP)), appearing during dialysis of rat isolated ventricular myocytes with a low-ATP (100 μM) internal solution under whole-cell patch-clamp conditions, were examined in the presence of a P1 purinoceptor antagonist.The extracellular application of ATP in the micromolar range induced, besides known inward currents through cationic and chloride channels, the facilitation o...

  18. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P.A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  19. Quaternary (liquid + liquid) equilibria of aqueous two-phase poly (ethylene glycol), poly (DMAM-TBAM), and KH{sub 2}PO{sub 4}: Experimental and generalized Flory-Huggins theory

    Energy Technology Data Exchange (ETDEWEB)

    Foroutan, Masumeh [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of)], E-mail: foroutan@khayam.ut.ac.ir; Khomami, Marmar Haghighi [Department of Physical Chemistry, Faculty of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of)

    2009-05-15

    Quaternary (liquid + liquid) equilibrium (LLE) data of the aqueous two-phase poly (ethylene glycol), poly (N,N-dimethylacrylamide-t-butylacrylamide) with abbreviation name poly (DMAM-TBAM) as a hydrophobic association water-soluble copolymer and KH{sub 2}PO{sub 4} has been determined experimentally at T = 338.15 K. Furthermore, the generalized Flory-Huggins theory with two electrostatic terms (the Debye-Hueckel and Pitzer-Debye-Hueckel) was used for correlation of the phase behavior of the quaternary system and the interaction parameters between all species were calculated. It was found that addition of poly (DMAM-TBAM) copolymer as well as changing the temperature can shift the binodal curves of aqueous two-phase systems containing polyethylene glycol (PEG) and salt. Also, the phase behavior of the DMAM-TBAM copolymer with some salts containing sodium chloride, ammonium hydrogen phosphate, potassium hydrogen phosphate, and sodium carbonate were studied experimentally at T = 338.15 K and the effect of the salt type on the their binodal curves was determined.

  20. Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

    Science.gov (United States)

    Çakır, S.; Coşkun, E.; Naumov, P.; Biçer, E.; Bulut, İ.; İçbudak, H.; Çakır, O.

    2002-08-01

    Aspartame adduct of copper(II) chloride Cu(Asp) 2Cl 2·2H 2O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.

  1. VKCDB: Voltage-gated potassium channel database

    Directory of Open Access Journals (Sweden)

    Gallin Warren J

    2004-01-01

    Full Text Available Abstract Background The family of voltage-gated potassium channels comprises a functionally diverse group of membrane proteins. They help maintain and regulate the potassium ion-based component of the membrane potential and are thus central to many critical physiological processes. VKCDB (Voltage-gated potassium [K] Channel DataBase is a database of structural and functional data on these channels. It is designed as a resource for research on the molecular basis of voltage-gated potassium channel function. Description Voltage-gated potassium channel sequences were identified by using BLASTP to search GENBANK and SWISSPROT. Annotations for all voltage-gated potassium channels were selectively parsed and integrated into VKCDB. Electrophysiological and pharmacological data for the channels were collected from published journal articles. Transmembrane domain predictions by TMHMM and PHD are included for each VKCDB entry. Multiple sequence alignments of conserved domains of channels of the four Kv families and the KCNQ family are also included. Currently VKCDB contains 346 channel entries. It can be browsed and searched using a set of functionally relevant categories. Protein sequences can also be searched using a local BLAST engine. Conclusions VKCDB is a resource for comparative studies of voltage-gated potassium channels. The methods used to construct VKCDB are general; they can be used to create specialized databases for other protein families. VKCDB is accessible at http://vkcdb.biology.ualberta.ca.

  2. Evaluation of stress corrosion cracking in aqueous solution neutron shield of transport/storage cask for spent fuel

    International Nuclear Information System (INIS)

    Experimental evaluation proved that no chloride induced stress corrosion cracking will occur on the metal cask which utilizes propylene glycol aqueous solution as neutron shield. Crevice corrosion, precursor of cracking, occurs at about 0.4V vs. 0.1M-KCl silver silver-chloride reference electrode in aqueous solution with chloride concentration of more than 5 times higher than limit value. On the other hand, the electrochemical potential (ECP) of cask material was 0.08V in air saturated aqueous solution. Since ECP is much smaller than the crevice corrosion potential below which no crevice corrosion is expected, the possibility is very small for chloride induced stress corrosion cracking to occur on the cask. (author)

  3. Chloride sublimation of gold-arsenic concentrates

    International Nuclear Information System (INIS)

    Present article is devoted to chloride sublimation of gold-arsenic concentrates. The results of studies of chloride sublimation of gold-arsenic comprising concentrates of Chore deposit of Tajikistan are considered. It is found that by application sodium chloride for gold-arsenic comprising concentrates it is possible to extract gold and silver from flotation concentrates.

  4. 21 CFR 582.5446 - Manganese chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  5. Experimental tests for 36cl removal from aqueous solution

    International Nuclear Information System (INIS)

    This paper presents the experimental tests of a chlorine separation and purification method from aqueous samples with knowing content of Co, Cs, Eu, Ni and Sr stable elements. The method is based on the property of chloride ions to form a silver chloride white precipitate, followed by the use of the extraction chromatography on the strong anionic resin (Bio-Rad AG® 1-X4) to purify chlorine. The concentrations of Co, Cs, Eu, Ni and Sr (separated from Cl by using precipitation method) were measured by ICP-OES. The silver chloride precipitate was dissolved in 25 % NH3 solution and loaded onto the anionic resin. The chloride ions were strongly retained on the resin and eluted with a proper solution. The final solution, containing chloride ions, was converted to a form compatible with the spectrophotometric and Mohr titration techniques, which were used to determine chloride concentration. The separation yields of Co, Cs, Eu, Ni and Sr from Cl are very good. More than 98 % from the initial concentration of chlorine was recovered. (authors)

  6. Nutritional potassium requirement for laying Japanese quails

    OpenAIRE

    Fernando Guilherme Perazzo Costa; Ladyanne Raia Rodrigues; Cláudia de Castro Goulart; Cleber Franklin Santos de Oliveira; Valéria Pereira Rodrigues; José Humberto Vilar da Silva

    2011-01-01

    The objective of this study was to evaluate the potassium requirement for laying Japanese quails. Two hundred and forty quails were distributed in a randomized block design, with five treatments and six replicates, with eight birds each. The treatments consisted of a basal diet deficient in potassium (K) (2.50 g/kg), supplemented with potassium carbonate, to replace the inert, to reach levels of 2.50, 3.50, 4.50, 5.50 and 6.50 (g/kg) of K in the diet. There was a quadratic effect of K levels ...

  7. A CATIONIC POLYACRYLAMIDE DISPERSION SYNTHESIS BY DISPERSION POLYMERIZATION IN AQUEOUS SOLUTION

    OpenAIRE

    Yufeng Wang; Kefu Chen; Lihuan Mo; Huiren Hu,

    2011-01-01

    A cationic polyacrylamide (CPAM) dispersion, the copolymer of acrylamide (AM) and acryloyloxyethyltrimethyl ammonium chloride (DAC), has been synthesized through dispersion polymerization in aqueous ammonium sulfate ((NH4)2SO4) solution. The polymerization was initiated by tert-butyl hydroperoxide (TBHP) and ferrisulfas (FeSO4) using poly(dimethyl diallyl ammonium chloride) (PDMDAAC) as the stabilizer. At the optimal reaction conditions, the relative molecular weight of the CPAM dispersion wa...

  8. Soft X-ray absorption spectra of aqueous salt solutions with highly charged cations in liquid microjets

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, Craig P.; Uejio, Janel S.; Duffin, Andrew M.; Drisdell, Walter S.; Smith, Jared D.; Saykally, Richard J.

    2010-03-11

    X-ray absorption spectra of 1M aqueous solutions of indium (III) chloride, yttrium (III) bromide, lanthanum (III) chloride, tin (IV) chloride and chromium (III) chloride have been measured at the oxygen K-edge. Relatively minor changes are observed in the spectra compared to that of pure water. SnCl{sub 4} and CrCl{sub 3} exhibit a new onset feature which is attributed to formation of hydroxide or other complex molecules in the solution. At higher energy, only relatively minor, but salt-specific changes in the spectra occur. The small magnitude of the observed spectral changes is ascribed to offsetting perturbations by the cations and anions.

  9. Pseudo-Bartter syndrome in an infant with congenital chloride diarrhoea

    Directory of Open Access Journals (Sweden)

    Igrutinović Zoran

    2011-01-01

    Full Text Available Introduction. Pseudo-Bartter syndrome encompasses a heterogenous group of disorders similar to Bartter syndrome. We are presenting an infant with pseudo-Bartter syndrome caused by congenital chloride diarrhoea. Case Outline. A male newborn born in the 37th gestational week (GW to young healthy and non-consanguineous parents. In the 35th GW a polyhydramnios with bowel dilatation was verified by ultrasonography. After birth he manifested several episodes of hyponatremic dehydration with hypochloraemia, hypokalaemia and metabolic alkalosis, so as Bartter syndrome was suspected treatment with indomethacin, spironolactone and additional intake of NaCl was initiated. However, this therapy gave no results, so that at age six months he was rehospitalized under the features of persistent watery diarrhoea, vomiting, dehydration and acute renal failure (serum creatinine 123 μmol/L. The laboratory results showed hyponatraemia (123 mmol/L, hypokalaemia (3.1 mmol/L, severe hypochloraemia (43 mmol/L, alcalosis (blood pH 7.64, bicarbonate 50.6 mmol/L, high plasma renin (20.6 ng/ml and aldosterone (232.9 ng/ml, but a low urinary chloride concentration (2.1 mmol/L. Based on these findings, as well as the stool chloride concentration of 110 mmol/L, the patient was diagnosed congenital chloride diarrhoea. In further course, the patient was treated by intensive fluid, sodium and potassium supplementation which resulted in the normalization of serum electrolytes, renal function, as well as his mental and physical development during 10 months of follow-up. Conclusion. Persistent watery diarrhoea with a high concentration of chloride in stool is the key finding in the differentiation of congenital chloride diarrhoea from Bartter syndrome. The treatment of congenital chloride diarrhoea consists primarily of adequate water and electrolytes replacement.

  10. On the decay of the ozonide radical in aqueous alkaline solutions

    Science.gov (United States)

    Bhattacharyya, P. K.; Saini, R. D.

    1982-11-01

    In flash photolysis of an oxygenated aqueous potassium persulphate solution at pH 12.5 the decay of the ozonide radical has been found to follow 3/2 order kinetics which has been explained by reactions O -3 + O - ⇌ 2 O -2 and O -3 + HO 2 → 2 O 2 + OH -

  11. Reactivity of β-blockers/agonists with aqueous permanganate. Kinetics and transformation products of salbutamol.

    Science.gov (United States)

    Rodríguez-Álvarez, Tania; Rodil, Rosario; Quintana, José Benito; Cela, Rafael

    2015-08-01

    The possible oxidation of two β-blockers, atenolol and propranolol, and one β-agonist, salbutamol, with aqueous potassium permanganate (KMnO4) was investigated by liquid chromatography-quadrupole-time-of-flight-mass spectrometry (LC-QTOF-MS). Under strong oxidation conditions (2 mg L(-1) KMnO4, 24 h), only salbutamol did significantly react. In this way, the oxidation kinetics of salbutamol was further investigated at different concentrations of KMnO4, chloride, phosphate and sample pH by means of a full factorial experimental design. Depending on these factors, half-lives were in the range 1-144 min for drug and it was observed that KMnO4 concentration was the most significant factor, resulting in increased reaction rate as it is increased. Moreover, the reaction of salbutamol is also enhanced at basic pH and to a minor extent by the presence of phosphates, being both factors more relevant at low KMnO4 concentrations. The use of an accurate-mass LC-QTOF-MS system permitted the identification of a total of seven transformation products (TPs). The transformation path of the drug begins by the attack of KMnO4 on two double bonds of the aromatic ring of salbutamol via 3 + 2 and 2 + 2 addition reactions, which resulted in the ring opening and that continues with oxidative reactions to finally produce smaller size TPs, ending with tert-butyl-formamide, as the smallest TP identified. Reaction in real samples showed a slower and partial oxidation of the pharmaceutical, due to other competing water organic constituents, but still exceeding 60%. Moreover, the software predicted toxicity of TPs indicates that they are expected not to be more toxic than salbutamol, in contrast to the results obtained for the predicted toxicity of chlorination TPs, excepting predicted developmental toxicity. PMID:25965887

  12. Suicidal Ingestion of Potassium Permanganate Crystals: A Rare Encounter

    OpenAIRE

    Karthik, Ravikanti; Veerendranath, Hari Prasad Kanakapura; Wali, Siddraj; Mohan, Murali N T; Kumar, Praveen A. C.; Trimurty, Gaganam

    2014-01-01

    Potassium permanganate poisoning is not common. Although Symptoms of potassium permanganate ingestion are gastrointestinal and Complications due to ingestion of potassium permanganate include cardiovascular depression, hepatic and renal damage, upper airway obstruction, bleeding tendency and methemoglobinemia. Gastric damage due to potassium permanganate has rarely been reported previously. We are reporting a 34-year old female patient who presented to our Emergency Department after suicidal ...

  13. Genetics Home Reference: potassium-aggravated myotonia

    Science.gov (United States)

    ... myotonia Patient Support and Advocacy Resources (2 links) Muscular Dystrophy Association Resource list from the University of Kansas Medical Center Genetic Testing Registry (1 link) Potassium aggravated myotonia ClinicalTrials. ...

  14. Low Potassium Diet (Beyond the Basics)

    Science.gov (United States)

    ... to 120 mL/min) . A registered dietitian or nutritionist can help to create a low-potassium meal ... volumes. You agree to comply with all applicable laws, including all US export laws and regulations, in ...

  15. Transition properties of potassium atom

    CERN Document Server

    Nandy, D K; Shah, B P; Sahoo, B K

    2012-01-01

    We report here oscillator strengths, transition rates, branching ratios and lifetimes due to allowed transitions in potassium (K) atom. We evaluate electric dipole (E1) amplitudes using an all order relativistic many-body perturbation method. The obtained results are compared with previously available experimental and theoretical studies. Using the E1 matrix elements mentioned above and estimated from the lifetimes of the 4P states, we determine precise values of static and dynamic polarizabilities for the first five low-lying states in the considered atom. The static polarizabilities of the ground and 4P states in the present work are more precise than the available measurements in these states. Only the present work employs relativistic theory to evaluate polarizabilities in the 3D states for which no experimental results are known to compare with. We also reexamine "magic wavelengths" for the $4P_{1/2} \\rightarrow 4S$ and $4P_{3/2} \\rightarrow 4S$ transitions due to the linearly polarized light which are u...

  16. Independent effects of aldosterone and potassium on induction of potassium adaptation in rat kidney.

    OpenAIRE

    Stanton, B.; Pan, L.; Deetjen, H; Guckian, V; Giebisch, G

    1987-01-01

    We examined the independent effects of a high potassium diet and increased aldosterone levels on the development of renal potassium adaptation. This condition is defined by the increased ability of the kidneys to excrete an acute infusion of potassium. Rats were adrenalectomized (ADX) and received aldosterone at basal levels (0.5 microgram/100 g X d) or at high levels (2.0 micrograms/100 g X d) for 10 d. In each experimental group, animals received either a control diet or a high potassium di...

  17. POTASSIUM MEASUREMENT: CAUSES OF ERRORS IN MEASUREMENT

    OpenAIRE

    Kavitha; Omprakash

    2014-01-01

    It is not a easy task to recognize the errors in potassium measurement in the lab. Falsely elevated potassium levels if goes unrecognized by the lab and clinician, it is difficult to treat masked hypokalemic state, which is again a medical emergency. Such cases require proper monitoring by the clinician, so that cases with such history of pseudohyperkalemia which cannot be easily identified in the laboratory should not go unrecognized by clinician. The aim of this article is t...

  18. Potassium permanganate ingestion as a suicide attempt

    OpenAIRE

    Tuba Cimilli Ozturk; Ozlem Guneysel; Onur Yesil; Sebnem Eren Cevik

    2012-01-01

    Potassium permanganate is a highly corrosive, water-soluble oxidizing antiseptic. A 68- year-old female patient was admitted to our Emergency Department after ingestion of 3 tablets of 250 mg potassium permanganate as a suicide attempt. The physical exam revealed brown stained lesions in the oropharynx. Emergency endoscopy was performed by the gastroenterologist after the third hour of ingestion. Emergency endoscopy revealed multiple superficial (Grade I-II) lesions on the esophagus and cardi...

  19. Potassium Permanganate Poisoning: A Nonfatal Outcome

    OpenAIRE

    Eteiwi, Suzan M.; Al-Eyadah, Abdallah A.; Al-Sarihin, Khaldon K.; Ahmad A. Al-Omari; Rania A. Al-Asaad; Haddad, Fares H.

    2015-01-01

    Acute poisoning by potassium permanganate is a rare condition with high morbidity and mortality. Diagnosis of the condition relies on a history of exposure or ingestion and a high degree of clinical suspicion. Oxygen desaturation and the presence of methemoglobin are also helpful indicators. Since no specific antidote is available, treatment is mainly supportive. Few cases have been reported in the literature following potassium permanganate ingestion, whether intentional or accidental, and m...

  20. Radioactivity measurements in potassium enriched vegetation

    International Nuclear Information System (INIS)

    Measurements of radioactivity in food stuffs/vegetation is important because radiation dose to human population due to inhalation and ingestion (external and internal exposure) poses health hazard and contribute significantly to the total dose from natural sources. The radium and thorium isotopes always present in the body are measured in units of a millionth or a billionth of a gram, but when it comes to potassium we are talking about grams of material. The 2.5 g of potassium ingested each day contains 80 Becquerel (Bq) (or 2100 pCi) of 40K that quantity which produces 80 radioactive decays each second. The 140 g of potassium in a normal male contains about 4400 Bq (or 120,000 pCi) of 40K; that quantity produces a decay rate of about 4400 disintegrations per second. That means that 4400 radioactive 40K atoms decay and emit radiation in our bodies each second for as long as we live. Since potassium is found in the intracellular fluids, about 98 % of the potassium in the body is within cells. Thus at least 98 % of these disintegrations take place within body cells, and are potentially capable of altering the cell's DNA. Therefore, it is very essential to measure the activity concentration in the potassium enriched food stuffs. Knowledge of radioactivity present in potassium enriched food stuffs enables one to assess any possible radiological hazard to mankind by the use of such materials. In the light of the above mentioned facts, it is, therefore, fundamental to assess the radioactivity in commonly available potassium enriched foods. (author)

  1. On specific radioactivity of potassium in seawater

    International Nuclear Information System (INIS)

    To check up the validity of an assumption on the constancy of potassium specific radioactivity Asub(k) in seawater, 14 samples selected from the Pacific Ocean in 1982 at different depths and geographic coordinates have been investigated. The Asub(k) mean value in these samples is shown to coincide with the potassium aspecific activity in terrestrial rocks. However some deviations related to sampling latitude and deoth have been observed. The deviations are associated with the entries of cosmic and volcanic substances

  2. ROLE OF A NOVEL EXCIPIENT POLY(ETHYLENE GLYCOL)-b-POLY (l-HISTIDINE) IN RETENTION OF PHYSICAL STABILITY OF INSULIN AT AQUEOUS/ORGANIC INTERFACE

    OpenAIRE

    Taluja, Ajay; Han Bae, You

    2007-01-01

    The aim of this study was to investigate whether a cationic polyelectrolyte; poly(ethylene glycol) PEG-b-poly(l-histidine) diblock copolymer [PEG-polyHis] can stabilize insulin, at the aqueous/methylene chloride interface formed during the microencapsulation process. Insulin aggregation at this interface was monitored spectrophotometrically at 276 nm. The effects of protein concentration, pH of the aqueous medium, and the presence of poly(lactic-co-glycolic acid) [PLGA] in methylene chloride ...

  3. Caustic-Side Solvent Extraction: Extended Equilibrium Modeling of Cesium and Potassium Distribution Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Delmau, L.H.

    2002-06-13

    An extension of the model developed in FY01 for predicting equilibrium distribution ratios in the Caustic-Side Solvent Extraction (CSSX) process is presented here. Motivation for extending the model arose from the need to predict extraction performance of the recently optimized solvent composition and the desire to include additional waste components. This model involves the extraction of cesium and potassium from different cesium, potassium, and sodium media over a large range of concentrations. Those different media include a large variety of anions such as nitrate, hydroxide, nitrite, chloride, fluoride, sulfate, and carbonate. The model was defined based on several hundreds of experimental data points and predicted satisfactorily the cesium extraction from five different SRS waste simulants. This process model encompassed almost exclusively 1:1:1 metal:anion:ligand species. Fluoride, sulfate, and carbonate species were found to be very little extractable, and their main impact is reflected through their activity effects. This model gave a very good cesium and potassium extraction prediction from sodium salts, which is what is needed when trying to predict the behavior from actual waste. However, the extraction from potassium or cesium salts, and the extraction of sodium could be improved, and some additional effort was devoted to improve the thermodynamic rigor of the model. Toward this end, more detailed anion-specific models were developed based on the cesium, potassium, and sodium distribution ratios obtained with simple systems containing single anions, but it has not yet proven possible to combine those models to obtain better predictions than provided by the process model.

  4. Development and validation of an UV derivative spectrophotometric determination of Losartan potassium in tablets.

    Science.gov (United States)

    Lastra, Olga C; Lemus, Igor G; Sánchez, Hugo J; Pérez, Renato F

    2003-09-19

    Development and validation of an analytical UV derivative spectrophotometric method to quantify Losartan potassium used as a single active principle in pharmaceutical forms were done. Pharmacopeias have not yet provided an official method for its quantification. A study was carried out of all the parameters established by USP XXIV to validate an analytical method for a solid pharmaceutical form, i.e. linearity, range, accuracy, precision and specificity. All these parameters were found in accordance with the acceptance criteria of Comité de Guías Oficiales de Validación de la Dirección General de Control de Insumos para la Salud de México. Based on the spectrophotometric characteristics of Losartan potassium, a signal at 234 nm of the first derivative spectrum (1D234) was found adequate for quantification. The linearity between signal 1D234 and concentration of Losartan potassium in the range of 4.00-6.00 mg l(-1) in aqueous solutions presents a square correlation coefficient (r2) of 0.9938. The mean recovery percentage was 100.7+/-1.1% and the precision expressed as relative standard deviation (R.S.D.) 0.88%. In addition, the proposed method is simple, easy to apply, low-cost, does not use polluting reagents and requires relatively inexpensive instruments. Then, it is a good alternative to existing methods for determining Losartan potassium in tablets provided that the pharmaceutical dosage form does not contain hydrochlorothiazide as second drug. PMID:12972082

  5. Synthesis of potassium ferrate using residual ferrous sulfate as iron bearing material

    International Nuclear Information System (INIS)

    This paper summarizes the results obtained during potassium ferrate (K2FeVIO4) synthesis which is a high added value material. This compound that contains iron in the rare hexavalent state is becoming a substance of growing importance for the water and effluent treatment industries. This is due to its multi-functional nature (oxidation, flocculation, elimination of heavy metals, decomposition of organic matter, etc.). The most well known synthesis methods for potassium ferrate synthesis are those involving the chemical and/or electrochemical oxidation of iron (II) and (III) from aqueous solutions having a high alkali concentration. These methods are generally characterized by a low FeVI efficiency due to the reaction of the potassium ferrate with water, leading to the reduction of FeVI into FeIII. Concerning the work pertinent to this paper, the synthesis of K2FeVIO4 was achieved by a simultaneous reaction of two solids (iron sulfate and KOH) and one gaseous oxidant (chlorine). The synthesis process is performed in a rotary reactor at room temperature and the global synthesis reaction is exothermic. The effects of different experimental parameters on the potassium ferrate synthesis are investigated to determine the optimal conditions for the process.

  6. Material Solutions to Mitigate the Alkali Chloride-Induced High Temperature Corrosion

    DEFF Research Database (Denmark)

    Kiamehr, Saeed

    High temperature corrosion induced by potassium chloride (KCl) is a major challenge for biomass-based power plants. The current study aims at identification or development of alloys or coatings that can yield a better performance at a target metal temperature of 600oC compared to austenitic...... of metals. This was aimed at identifying the constituent elements of a corrosion resistant alloy. Calculations suggested Al, Si, Cr, Ti, Y, Ce, Ta, Hf and Zr as suitable oxide-forming elements as well as Mo, Ni and Co as suitable matrix-forming elements. However, the presence of potassium in the...... available alloys and obtain further knowledge on the mechanism of high temperature corrosion induced by KCl, a wide range of commercial and model alloys were exposed under conditions relevant to high temperature corrosion in biomass-firing power plants. The exposures were conducted at 600oC for 168h in...

  7. Estimated potassium content in Hanford workers

    International Nuclear Information System (INIS)

    Potassium content in male and female workers at the US Dept. of Energy Hanford Site was estimated based on measurements made in 2002 of 40K activity in the body. The 40K activity in females ranged from 2.1 to 4.1 kBq with an average of 3.1 ± 0.02 kBq. The total body potassium (TBK) content in females averaged 98 ± 0.6 g. The 40K activity in males ranged from 2.8 to 6.6 kBq with an average of 4.2 ± 0.01 kBq and the average TBK was 136 ± 0.3 g. The average TBK value for males aged 20-49 y was 140 g. The average TBK values for both genders decreased with age. The average potassium concentrations calculated for the different age ranges for males were 15-25% less than the value (1.9 gK per kg) obtained using the reported ICRP reference potassium and reference weight values. Potassium concentrations were inversely correlated with body-build index, body-mass index and body weight. These correlations could possibly be utilised to help assess the risk for disease. Future work is planned to evaluate whether monitoring of potassium concentrations could be used as a tool for the detection of diabetes and hypertension. (authors)

  8. Estimated Potassium Content in Hanford Workers

    International Nuclear Information System (INIS)

    Potassium content in male and female workers at the Department of Energy Hanford Site was estimated based on measurements made in 2002 of 40K activity in the body. A coaxial germanium detection system was used for the measurements. The activity in female workers ranged from 2.1 to 4.1 kBq with an average of 3.1 ± 0.02 kBq. Total body potassium (TBK) content in female workers averaged 96 ± 0.3 g. The activity in male workers ranged from 2.8 to 6.6 kBq with an average of 4.3 ± 0.01 kBq and the average TBK was 136 ± 0.3 g. The average potassium concentration decreased with age in both males and females. The average potassium content and potassium concentrations for both males and females were less than the corresponding reference values. Potassium concentrations were inversely correlated with body-build index, body-mass index, and body weight for both males and females

  9. Differentiation of energy expenditure of membrane electrochemical utilization of lithium chloride in polymeric fibers production

    International Nuclear Information System (INIS)

    Electric power consumption for preparation of lithium hydroxide aqueous solution for regeneration stage in production of polymer fibers in a wide range of catholyte volumetric consumption has been calculated by the data of laboratory experiments, the results are presented. Energy consumption for lithium ions transfer through the Nafion membrane has been separated. It is shown that under stationary conditions of lithium chloride aqueous solution electrolysis and at current loading on the membrane approximately up to 1 kA x m-2 the drifting lithium ions can not upset preliminary flooding of the membrane. 10 refs.; 3 figs.; 1 tab

  10. Bespoke cationic nano-objects via RAFT aqueous dispersion polymerisation

    OpenAIRE

    Williams, M.; Penfold, NJW; Lovett, JR; Warren, NJ; Douglas, CWI; Doroshenko, N; Verstraete, P; Smets, J; Armes, SP

    2016-01-01

    A range of cationic diblock copolymer nanoparticles are synthesised via polymerisation-induced self-assembly (PISA) using a RAFT aqueous dispersion polymerisation formulation. The cationic character of these nanoparticles can be systematically varied by utilising a binary mixture of two macro-CTAs, namely non-ionic poly(glycerol monomethacrylate) (PGMA) and cationic poly[2-(methacryloyloxy)ethyl]trimethylammonium chloride (PQDMA), with poly(2-hydroxypropyl methacrylate) (PHPMA) being selected...

  11. Similarities and differences of alkali metal chlorides applied in organic light-emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Lue, Zhaoyue [Department of Physics, School of Science, East China University of Science and Technology, Shanghai 200237 (China); Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Deng, Zhenbo [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Hou, Ying [Department of Physics, School of Science, East China University of Science and Technology, Shanghai 200237 (China); Xu, Haisheng, E-mail: hsxu@ecust.edu.cn [Department of Physics, School of Science, East China University of Science and Technology, Shanghai 200237 (China); Kunshan Hisense Electronics, Co., Ltd., Kunshan, Jiangsu 215300 (China)

    2012-12-15

    The similarities and differences of alkali metal chlorides (sodium chloride (NaCl), potassium chloride (KCl), rubidium chloride (RbCl) and cesium chloride (CsCl)) applied in organic light-emitting diodes (OLEDs) are investigated. The behavior is similar for the OLEDs with these four chlorides as electron injection layer (EIL). Their maximum luminance and efficiency at 100 mA/cm{sup 2} are within the ranges of 18 550 {+-} 600 (cd/m{sup 2}) with an error of 3.23% and 4.09 {+-} 0.15 (cd/A) within an error of 3.67%, respectively. The similar performance is due to almost identical electron injection barrier for NaCl, KCl, RbCl and CsCl as EIL. Interestingly, the properties are different for devices with chlorides inserted inside tris (8-hydroxyquinoline) aluminum at the position of 20 nm away from aluminum cathode, labeled as NaCl-, KCl-, RbCl- and CsCl- devices. The relation of luminance is CsCl- > RbCl- = KCl- > NaCl-, where '>' and '=' mean 'better than' and 'the same as', respectively. And the device efficiencies are decreased from CsCl to NaCl. That is, the sort order of the efficiencies is CsCl- > RbCl- > KCl- > NaCl-. The mechanism is explained by tunneling model in terms of various energy gaps estimated by optical electronegativity of NaCl, KCl, RbCl and CsCl. - Highlights: Black-Right-Pointing-Pointer Effects of NaCl, KCl, RbCl and CsCl in organic light-emitting diodes are compared. Black-Right-Pointing-Pointer The similar performance is due to almost identical electron injection barrier. Black-Right-Pointing-Pointer The different behavior of chlorides inside Alq{sub 3} is explained by tunneling model. Black-Right-Pointing-Pointer The different behavior is attributed to various energy gaps of different chlorides. Black-Right-Pointing-Pointer The efficiency of device with chlorides inside Alq{sub 3} is decreased from CsCl to NaCl.

  12. Neutron diffraction study of aluminum chloride imidazolium chloride molten salts

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, S. [Nisshin Steel Co. Ltd., Tokyo (Japan); Saboungi, M.L.; Suzuya, K. [Argonne National Lab., IL (United States); Koura, N. [Tokyo University of Science, Tokyo (Japan). Faculty of Science and Technology

    1994-02-01

    The structure of molten mixtures of (AlCl{sub 3}){sub x}(1-ethyl-3-methylimidazolium chloride){sub 1-x} was investigated by neutron diffraction techniques for x=0.46, 0.50, 0.60 and 0.67. Results derived from earlier ab initio molecular orbital (6-31G* basis set) computations for AlCl{sub 4}{sup {minus}}, Al{sub 2}Cl{sub 7}{sup {minus}}, and EMI{sup +} were used to calculate the diffraction patterns; the calculated contributions of each species are thus obtained and overall results are in good agreement with measurements.

  13. Determination of chloride in brazilian crude oils by ion chromatography after extraction induced by emulsion breaking.

    Science.gov (United States)

    Robaina, Nicolle F; Feiteira, Fernanda N; Cassella, Alessandra R; Cassella, Ricardo J

    2016-08-01

    The present paper reports on the development of a novel extraction induced by emulsion breaking (EIEB) method for the determination of chloride in crude oils. The proposed method was based on the formation and breaking of oil-in-water emulsions with the samples and the consequential transference of the highly water-soluble chloride to the aqueous phase during emulsion breaking, which was achieved by centrifugation. The determination of chloride in the extracts was performed by ion chromatography (IC) with conductivity detection. Several parameters (oil phase:aqueous phase ratio, crude oil:mineral oil ratio, shaking time and type and concentration of surfactant) that could affect the performance of the method were evaluated. Total extraction of chloride from samples could be achieved when 1.0g of oil phase (0.5g of sample+0.5g of mineral oil) was emulsified in 5mL of a 2.5% (m/v) solution of Triton X-114. The obtained emulsion was shaken for 60min and broken by centrifugation for 5min at 5000rpm. The separated aqueous phase was collected, filtered and diluted before analysis by IC. Under these conditions, the limit of detection was 0.5μgg(-1) NaCl and the limit of quantification was 1.6μgg(-1) NaCl. We applied the method to the determination of chloride in six Brazilian crude oils and the results did not differ statistically from those obtained by the ASTM D6470 method when the paired Student-t-test, at 95% confidence level, was applied. PMID:27388656

  14. Transverse thermal magnetoresistance of potassium

    International Nuclear Information System (INIS)

    Results are presented of extensive thermal magnetoresistance measurements on single-crystal and polycrystalline specimens of potassium having residual resistance ratios (RRR) ranging from 1100 to 5300. Measurements were made between 2 and 90K for magnetic fields up to 1.8 T. The observed thermal magnetoresistance cannot be understood on the basis of either semiclassical theories or from the electrical magnetoresistance and the Wiedemann-Franz law. A number of relationships are observed between the thermal and electrical magnetoresistances, many of which are not immediately obvious when comparing direct experimental observations. The thermal magnetoresistance W(T,H) is given reasonably well by W(T,H)T = W(T,0)T + AH + BH2, where both A and B are temperature-dependent coefficients. Results show that A = A0 + A1T3, while B(T) cannot be expressed as any simple power law. A0 is dependent on the RRR, while A1 is independent of the RRR. Two relationships are found between corresponding coefficients in the electrical and thermal magnetoresistance: (i) the Wiedmann--Franz law relates A0 to the Kohler slope of the electrical magnetoresistance and (ii) the temperature-dependent portions of the electrical and thermal Kohler slopes are both proportional to the electron--phonon scattering contribution to the corresponding zero-field resistance. The latter provides evidence that inelastic scattering is very important in determining the temperature-dependent linear magnetoresistances. Part, but by no means all, of the quadratic thermal resistance is accounted for by lattice thermal conduction. It is concluded that at least a portion of the anomalous electrical and thermal magnetoresistances is due to intrinsic causes and not inhomogeneities or other macroscopic defects

  15. Skin injuries afflicting three oil workers following contact with calcium bromide and/or calcium chloride.

    Science.gov (United States)

    Saeed, W R; Distante, S; Holmes, J D; Kolhe, P S

    1997-01-01

    Calcium bromide brine is a highly concentrated aqueous solution of calcium bromide and calcium chloride. It is used extensively in the oil industry. This solution and its components are recognized as causes of skin injury and information is available from the manufacturers on their safe use and handling. Two patients who were injured following unprotected skin exposure to this solution and one patient who was injured following exposure to calcium chloride powder are reported. All sustained skin injuries characterised by an absence of pain and a delayed clinical appearance of the full extent of the injury. Furthermore healing was complicated by graft loss or was slow. Although organic bromine compounds are recognized as a cause of skin injuries, no previous reports of such injuries to humans secondary to calcium chloride or bromide exposure were found in the medical literature. Our experience with these patients is described. PMID:9568340

  16. Nucleation studies and characterization of potassium thiocyanate added KDP crystals grown by seed rotation technique

    International Nuclear Information System (INIS)

    The effect of the addition of potassium thiocyanate on potassium dihydrogen phosphate (KDP) crystals, grown from aqueous solution by the temperature lowering method using a microcontroller based seed rotation technique has been studied. As part of nucleation studies, metastable zone width, induction period and crystal growth rate of additive added KDP are determined and analyzed with the pure system. Dielectric measurements were carried out on pure and doped crystals at various temperatures ranging from 313 to 423 K and compared. The crystalline perfection of the grown crystal was studied by the high resolution X-ray diffraction analysis. The crystal grown from additive added solution was subjected to structural, optical transmission, second harmonic generation and hardness studies and the effect of additive on pure system is investigated.

  17. Tri-potassium phosphate as a solid catalyst for biodiesel production from waste cooking oil

    Energy Technology Data Exchange (ETDEWEB)

    Guan, Guoqing; Kusakabe, Katsuki; Yamasaki, Satoko [Department of Living Environmental Science, Fukuoka Women' s University, 1-1-1 Kasumigaoka, Higashi-ku, Fukuoka 813-8529 (Japan)

    2009-04-15

    Transesterification of waste cooking oil with methanol, using tri-potassium phosphate as a solid catalyst, was investigated. Tri-potassium phosphate shows high catalytic properties for the transesterification reaction, compared to CaO and tri-sodium phosphate. Transesterification of waste cooking oil required approximately two times more solid catalyst than transesterification of sunflower oil. The fatty acid methyl ester (FAME) yield reached 97.3% when the transesterification was performed with a catalyst concentration of 4 wt.% at 60 C for 120 min. After regeneration of the used catalyst with aqueous KOH solution, the FAME yield recovered to 88%. Addition of a co-solvent changed the reaction state from three-phase to two-phase, but reduced the FAME yield, contrary to the results with homogeneous catalysts. The catalyst particles were easily agglomerated by the glycerol drops derived from the homogeneous liquid in the presence of co-solvents, reducing the catalytic activity. (author)

  18. Nucleation studies and characterization of potassium thiocyanate added KDP crystals grown by seed rotation technique

    Energy Technology Data Exchange (ETDEWEB)

    Dhanaraj, P.V. [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Rajesh, N.P., E-mail: rajeshnp@ssn.edu.i [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Mahadevan, C.K. [Physics Research Centre, S.T. Hindu College, Nagercoil 629 002 (India); Bhagavannarayana, G. [C.G.C. Section, National Physical Laboratory, New Delhi 110 012 (India)

    2009-08-01

    The effect of the addition of potassium thiocyanate on potassium dihydrogen phosphate (KDP) crystals, grown from aqueous solution by the temperature lowering method using a microcontroller based seed rotation technique has been studied. As part of nucleation studies, metastable zone width, induction period and crystal growth rate of additive added KDP are determined and analyzed with the pure system. Dielectric measurements were carried out on pure and doped crystals at various temperatures ranging from 313 to 423 K and compared. The crystalline perfection of the grown crystal was studied by the high resolution X-ray diffraction analysis. The crystal grown from additive added solution was subjected to structural, optical transmission, second harmonic generation and hardness studies and the effect of additive on pure system is investigated.

  19. Elucidating the structure of the magnesium aluminum chloride complex electrolyte for magnesium-ion batteries

    OpenAIRE

    Canepa, Pieremanuele; Jayaraman, Saivenkataraman; Cheng, Lei; Rajput, Nav Nidhi; Richards, William D.; Gautam, Gopalakrishnan Sai; Curtiss, Larry A.; Persson, Kristin A.; Ceder, Gerbrand

    2015-01-01

    Non-aqueous Mg-ion batteries offer a promising way to overcome safety, costs, and energy density limitations of state-of-the-art Li-ion battery technology. We present a rigorous analysis of the magnesium aluminum chloride complex (MACC) in tetrahydrofuran (THF), one of the few electrolytes that can reversibly plate and strip Mg. We use ab initio calculations and classical molecular dynamics simulations to interrogate the MACC electrolyte composition with the goal of addressing two urgent ques...

  20. Sorption method for scandium (3) chloride purification from zirconium (4) impurity

    International Nuclear Information System (INIS)

    Kinetics of Zr4+ sorption on cationite KRF-20t-60 in H-form containing phosphonic functional groups from ScCl3 solution under dynamic conditions was studied for scandium (3) chloride purification from zirconium (4) impurity. It is shown that at initial concentration of scandium chloride in solution equal to 3 g/l and zirconium impurity concentration of about 3 mg/l, sorption column height to diameter ratio equal to 10:1 and solution flow rate 0.4 ml/min · cm2, the method mentioned provides purification factor of about 50. Variants of the sorbent regeneration using 5% solution of ammonium fluoride or 10% solution of potassium carbonate at room temperature were proposed

  1. Synthesis of Zirconium Lower Chlorides

    International Nuclear Information System (INIS)

    This research is accurately related to the Halox concept of research reactor spent fuel element treatment.The aim of this project is to work the conditioning through selected chlorination of the element that make the spent fuel element. This research studied the physical chemistry conditions which produce formation of the lower zirconium chlorides through the reaction between metallic Zr and gaseous ZrCl4 in a silica reactor.This work focused special attention in the analysis and confrontation of the published results among the different authors in order to reveal coincidences and contradictions.Experimental section consisted in a set of synthesis with different reaction conditions and reactor design. After reaction were analyzed the products on Zr shavings and the deposit growth on wall reactor.The products were strongly dependent of reactor design. It was observed that as the distance between Zr and wall reactor increased greater was tendency to lower chlorides formation.In reactors with small distance the reaction follows other way without formation of lower chlorides.Analysis on deposit growth on reactor showed that may be formed to a mixture of SixZry intermetallics and zirconium oxides.Presence of oxygen in Zr and Zr-Si compounds on wall reactor reveals that there is an interaction between quartz and reactants.This interaction is in gaseous phase because contamination is observed in experiences where Zr was not in contact with reactor.Finally, it was made a global analysis of all experiences and a possible mechanism that interprets reaction ways is proposed

  2. Potassium acetate and potassium lactate enhance the microbiological and physical properties of marinated catfish fillets

    Science.gov (United States)

    Sodium or potassium salts such as lactate and acetate can be used to inhibit the growth of spoilage bacteria and food-borne pathogens, and thereby prolong the shelf-life of refrigerated seafood. However, minimal information is available regarding the combined effects of potassium salts (acetate and ...

  3. Chloride adsorption by calcined layered double hydroxides in hardened Portland cement paste

    KAUST Repository

    Yoon, Seyoon

    2014-06-01

    This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to prevent chloride-induced deterioration in reinforced concrete. CLDHs not only adsorbed chloride ions in aqueous solution with a memory effect but also had a much higher binding capacity than the original layered double hydroxides (LDHs) in the cement matrix. We investigated this adsorption in hardened cement paste in batch cultures to determine adsorption isotherms. The measured and theoretical binding capacities (153 mg g -1 and 257 mg g-1, respectively) of the CLDHs were comparable to the theoretical capacity of Friedel\\'s salt (2 mol mol-1 or 121 mg g-1), which belongs to the LDH family among cementitious phases. We simulated chloride adsorption by CLDHs through the cement matrix using the Fickian model and compared the simulation result to the X-ray fluorescence (XRF) chlorine map. Based on our results, it is proposed that the adsorption process is governed by the chloride transport through the cement matrix; this process differs from that in an aqueous solution. X-ray diffraction (XRD) analysis showed that the CLDH rebuilds the layered structure in a cementitious environment, thereby demonstrating the feasibility of applying CLDHs to the cement and concrete industries. © 2014 Published by Elsevier B.V. All rights reserved.

  4. Chloride adsorption by calcined layered double hydroxides in hardened Portland cement paste

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Seyoon [School of Engineering, Kings College, University of Aberdeen, Aberdeen AB24 3UE (United Kingdom); Moon, Juhyuk, E-mail: juhyuk.moon@stonybrook.edu [Civil Engineering Program, Department of Mechanical Engineering, State University of New York at Stony Brook, New York 11794 (United States); Bae, Sungchul [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States); Duan, Xiaonan [Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853 (United States); Giannelis, Emmanuel P. [Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853 (United States); Center for Refining and Petrochemicals, The Research Institute, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Monteiro, Paulo M. [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States)

    2014-06-01

    This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to prevent chloride-induced deterioration in reinforced concrete. CLDHs not only adsorbed chloride ions in aqueous solution with a memory effect but also had a much higher binding capacity than the original layered double hydroxides (LDHs) in the cement matrix. We investigated this adsorption in hardened cement paste in batch cultures to determine adsorption isotherms. The measured and theoretical binding capacities (153 mg g{sup −1} and 257 mg g{sup −1}, respectively) of the CLDHs were comparable to the theoretical capacity of Friedel's salt (2 mol mol{sup −1} or 121 mg g{sup −1}), which belongs to the LDH family among cementitious phases. We simulated chloride adsorption by CLDHs through the cement matrix using the Fickian model and compared the simulation result to the X-ray fluorescence (XRF) chlorine map. Based on our results, it is proposed that the adsorption process is governed by the chloride transport through the cement matrix; this process differs from that in an aqueous solution. X-ray diffraction (XRD) analysis showed that the CLDH rebuilds the layered structure in a cementitious environment, thereby demonstrating the feasibility of applying CLDHs to the cement and concrete industries. - Highlights: • We examine the adsorption equilibrium and kinetics of CLDH in the hydrated cement. • CLDH capacity to bind chloride ions in the hydrated cement paste is determined. • We model chloride adsorption by CLDH through the cement matrix. • CLDH reforms the layered structure with ion adsorption in the cement matrix.

  5. Chloride adsorption by calcined layered double hydroxides in hardened Portland cement paste

    International Nuclear Information System (INIS)

    This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to prevent chloride-induced deterioration in reinforced concrete. CLDHs not only adsorbed chloride ions in aqueous solution with a memory effect but also had a much higher binding capacity than the original layered double hydroxides (LDHs) in the cement matrix. We investigated this adsorption in hardened cement paste in batch cultures to determine adsorption isotherms. The measured and theoretical binding capacities (153 mg g−1 and 257 mg g−1, respectively) of the CLDHs were comparable to the theoretical capacity of Friedel's salt (2 mol mol−1 or 121 mg g−1), which belongs to the LDH family among cementitious phases. We simulated chloride adsorption by CLDHs through the cement matrix using the Fickian model and compared the simulation result to the X-ray fluorescence (XRF) chlorine map. Based on our results, it is proposed that the adsorption process is governed by the chloride transport through the cement matrix; this process differs from that in an aqueous solution. X-ray diffraction (XRD) analysis showed that the CLDH rebuilds the layered structure in a cementitious environment, thereby demonstrating the feasibility of applying CLDHs to the cement and concrete industries. - Highlights: • We examine the adsorption equilibrium and kinetics of CLDH in the hydrated cement. • CLDH capacity to bind chloride ions in the hydrated cement paste is determined. • We model chloride adsorption by CLDH through the cement matrix. • CLDH reforms the layered structure with ion adsorption in the cement matrix

  6. Development of potassium ion conducting hollow glass fibers. [potassium sulfur battery

    Science.gov (United States)

    Tsang, F. Y.

    1974-01-01

    Potassium ion conducting glasses, chemically resistant to potassium, potassium sulfide and sulfur, were made and their possible utility as the membrane material for a potassium/sulfur battery was evaluated. At least one satisfactory candidate was found. It possesses an electrical resistance which makes it usable as a membrane in the form of a fine hollow fiber. It's chemical and electrochemical resistances are excellent. The other aspects of the possible potassium sulfur battery utilizing such fine hollow fibers, including the header (or tube sheet) and a cathode current collector were studied. Several cathode materials were found to be satisfactory. None of the tube sheet materials studied possessed all the desired properties. Multi-fiber cells had very limited life-time due to physical failure of fibers at the fiber/tube sheet junctions.

  7. SYNTHESIS OF POTASSIUM FERRATE FOR USE IN TEXTILE WASTEWATER TREATMENT

    Directory of Open Access Journals (Sweden)

    F. Vaezi

    1999-12-01

    Full Text Available Potassium ferrate has been used as a multi-purpose chemical in treatment of wastewaters. With the formula of K2Fe04 it has 3 excellent characters for water treatment, so by using it alone, it would be possible to confine all reactivity, it is essential to prepare ferrate at the point of use. In this study, K2Fe04 was synthesized, then it has been employed for chlorine gas with an alkaline solution of ferric chloride, then it has been employed for textile wastewater treatment. Textile is one of the industries with high significance for water pollution. Comparison of results with a conventional coagulant (FeC13 has shown that total COD and SS removal were about 27 to 29 and 0.7 to 2 percent more and the sludge volume was 2.5 times less, also, the required dose of K2Fe04 for this treatment. Another advantage of using ferrate is its ability in reducing bacterial content of wastewater. All the simplex treated by synthesized chemical was well disinfected.

  8. Effect of Potassium Oleate on Rheological Behavior of Cationic Guar in Aqueous Solution with Varying Temperatures%油酸钾对不同温度下阳离子瓜儿胶水溶液流变行为影响

    Institute of Scientific and Technical Information of China (English)

    Qin Wang; Hua-zhen Li; Yong-jun Xie; Hua-yu Li; Hai-yang Yang

    2012-01-01

    The rheology of the cationic guar (CG) solution was measured and the effects of potassium oleate (KOA) upon the rheological properties of CG solution were studied.The steady shear viscosity measurement has shown that the viscosity of CG solution increased dramatically in the presence of KOA.The viscosity enhancement of KOA upon CG solution can be approximate three orders in magnitude.The gel-like formation of CG solution is observed at the high concentration of KOA.The excess addition of KOA results in the phase separation of CG solution.The oscillatory rheological measurement has shown that the crossover modulus Gc (corresponding to either storage modulus G' or loss modulus G' at the frequency ωc where G' equals G") for CG solution,decreases with the increasing the concentration of KOA in solution.On the other hand,the apparent relaxation time Tapp (=l/ωc) increases with increasing the concentration of KOA in solution.Our experimental results suggest that for surfactant such as KOA which has a stronger tendency to form micelles in solution,the cooperative hydrophobic interaction of polymer bound to surfactants is less necessary to the formation of aggregates in solution,especially at the high concentration of surfactants.In fact,with the increase of the concentration of KOA,the number of the aggregates which associate polymer together decreases whereas the intensity of these aggregates increases.The effect of temperature upon the aggregation is also significant.With the increase of temperature,the number of the aggregates increases whereas the intensity of these aggregates decreases,probably because the ionization of KOA increases at high temperature.%实验测定了阳离子瓜儿胶水溶液的流变行为,讨论了油酸钾 对其流变行为的影响.稳态剪切实验结果表明,加入油酸钾后,瓜儿 胶溶液的零切黏度增加厂近三个数量级,出现类似凝胶的性质.动态 剪切实验结果表明,瓜儿胶溶液表观模量则随

  9. Cobalt chloride induces metaphase when topically applied to larvae and pupae of the stingless bee Melipona scutellaris (Hymenoptera, Apidae, Meliponini).

    Science.gov (United States)

    Ueira-Vieira, C; Tavares, R R; Morelli, S; Pereira, B B; Silva, R P; Torres-Mariano, A R; Kerr, W E; Bonetti, A M

    2013-01-01

    In order to optimize preparations of bee metaphases, we tested cobalt chloride, which has been used as a metaphase inducer in other organisms, such as hamsters and fish. Four microliters of 65 mM cobalt chloride aqueous solution was topically applied to larval and pupal stages of the stingless bee Melipona scutellaris. The cerebral ganglion was removed after treatment and prepared for cytogenetic analysis. Identically manipulated untreated individuals were used as controls. The number of metaphases was increased 3-fold in treated individuals compared to controls. The micronucleus test showed no mutagenic effects of cobalt chloride on M. scutellaris cells. We concluded that cobalt chloride is a metaphase-inducing agent in M. scutellaris, thus being useful for cytogenetic analyses. PMID:23420403

  10. Use of potassium formate in road winter deicing can reduce groundwater deterioration.

    Science.gov (United States)

    Hellstén, Pasi P; Salminen, Jani M; Jørgensen, Kirsten S; Nystén, Taina H

    2005-07-01

    We present here an aquifer scale study on the fate of potassium formate, an alternative, weakly corrosive deicing agent in soil and subsurfaces. Potassium formate was used to deice a stretch of a highway in Finland. The fate of the formate was examined by monitoring the groundwater chemistry in the underlying aquifer of which a conceptual model was constructed. In addition, we determined aerobic and anaerobic biodegradation rates of formate at low temperatures (-2 to +6 degrees C) in soil microcosms. Our results show that the formate did not enter the saturated zone through the thin vadose zone; thus, no undesirable changes in the groundwater chemistry were observed. Furthermore, the conceptual model explained the distribution of chloride in the aquifer used in deicing for the past 30 years. We recorded mineralization potential up to 97% and up to 17% within 24 h under aerobic and anaerobic conditions, respectively, in the soil and subsurface samples obtained from the site. This demonstrates that biodegradation in the topsoil layers was responsible for the removal of the formate. We conclude that the use of potassium formate can potentially help diminish the negative impacts of road winter deicing on groundwater without jeopardizing traffic safety. PMID:16053115

  11. Formation of La{sup 3+}, Pr{sup 3+}, Eu{sup 3+}, Er{sup 3+}, and Lu{sup 3+} complexes with chloride ions, in aqueous medium; Formacion de complejos de La{sup 3+}, Pr{sup 3+}, Eu{sup 3+}, Er{sup 3+} y Lu{sup 3+} con iones cloruro, en medio acuoso

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez R, E.; Jimenez R, M.; Solache R, M. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2007-07-01

    The constants of stability of the complexes of La{sup 3+}, Pr{sup 3+}, Eu{sup 3+}, Er{sup 3+}, and Lu{sup 3+} with Cl{sup -} ions, its were determined, in the aqueous medium of HCI - HClO{sub 4} and by a solvent extraction method. The dinonyl naphtalene sulfonic acid in n-heptane was used as extractant. The lanthanides concentration, it was measured by a VIS spectrophotometry method and by another radiochemical. The ions specific interaction theory (SIT) it was used for the extrapolation to ionic force 0 M. The results indicate that the stability constants of the LnCI{sup 2+} species diminishes when increasing the ion force and the charge density. (Author)

  12. Cooper hydrometallurgy and extraction from chloride media

    International Nuclear Information System (INIS)

    The development of copper hydrometallurgy is presented and various processes proposed for copper recovery from sulphide concentrates are discussed. Leaching, extraction and stripping are considered, including reagents and processes. The extraction of copper from chloride solutions is discussed. Various extractants are presented and their use for copper transfer from chloride solutions to the organic phase and back to chloride and to sulphate solutions is discussed. (author) 4 refs

  13. Role of potassium-40 in evolutionary mutagenesis

    International Nuclear Information System (INIS)

    The radioactive isotope 40k is the largest source of natural radioactivity within living cells. Although 40K occurs naturally in low abundance (0.01% of all potassium), it represents approximately 40% of the internal radiation dose in man. It has been suggested that decay of 40K by electron capture has played a significant role in gene mutation and evolution. The authors examined cell growth and mutagenicity in several strains of E. coli grown in Tris medium containing natural potassium or potassium greatly depleted in 40K. Doubling times were the same in both media. In glucose limited chemostat cultures containing natural potassium or depleted potassium, there was no significant difference in mutation rate to bacteriophage T5 resistance, within standard errors of about 15%. In all cases, the mutation rate to T5 resistance was approximately 3 x 10-8 mutants cell-1 generation-1. The authors conclude that for mutation to T5 resistance, there was no measurable contribution of naturally occurring 40K to the spontaneous mutation rate

  14. Electrical properties of the potassium polytitanate compacts

    International Nuclear Information System (INIS)

    Highlights: • Quasi-static permittivity of potassium polytitanates compacts achieves 104–105. • Observed Maxwell–Wagner polarization attributes to layered structure of polytitanates. • The conductivity varies from 5 × 10−2 to 10−6–10−7 Sm/m in a wide range of temperatures. - Abstract: Titanates of alkali metals are widely applied materials as they are relatively low in cost and might be easily synthesized. They are utilized as adsorbents, catalysts, solid state electrolytes, superconductors. Here we report our results on electrical properties of the compacted amorphous potassium polytitanates powders. The electrical properties of the compacts were studied by means of complex impedance spectroscopy in a wide range of frequencies at different temperatures using two-electrode configuration. The frequency dependences of conductivity for the investigated potassium polytitanates compacts varies in the range from 5 × 10−2 Sm/m (high frequencies, ion conductivity) up to 10−6–10−7 Sm/m (low frequencies, electron conductivity) for a wide range of temperatures (19–150 °C). According to the results, at low frequencies quasi-static permittivity of the stabilized PPT compacts achieves high values of 104–105. This might be explained by Maxwell–Wagner polarization attributed to the layered structure of the potassium polytitanates particles containing potassium and hydronium ions together with crystallization water in the interlayer and is very promising for solid state electrolyte applications for moderate temperatures

  15. Potassium leakage and maize seed physiological potential

    Directory of Open Access Journals (Sweden)

    Miguel Mariane Victorio de Carvalho

    2002-01-01

    Full Text Available Seed production usually requires fast decisions to improve the efficacy of seed handling during harvesting, processing and storage. Seed technologists have focused on the development or improvement of procedures which allow rapid and consistent identification of higher quality seed lots. This research verified the effectiveness of the potassium leachate test on the evaluation of the physiological potential of maize seeds in comparison to recommended seed vigor tests. Five seed lots of the hybrid Avant were submitted to the potassium leachate, standard germination, first count, accelerated aging, electrical conductivity, field emergence and cold tests. The amount of potassium leachate was determined after seed imbibition for 30, 60, 90, 120, 150 and 180 minutes, at 25°C; a flame photometer adjusted to 50 mug K+ mL-1 pattern and reading 50 was used to determine the amount of leached potassium. The potassium leachate test consistently ranked the seed lots according to their physiological quality in comparison to other tests, and is a new alternative test for maize seed quality control programs.

  16. Dechlorinating reaction of organic chlorides

    International Nuclear Information System (INIS)

    Dechlorination has been examined by the reaction between iron, aluminum powder or CaO and organic chlorides such as C2HCl3 and CH2Cl2. Progress of the reaction was analyzed with mass spectrometer. The reaction between iron and organic chloride was rapidly occurred at the temperature between 350 and 440degC in an atmosphere of argon. Above 380degC, more than 99.5% of C2HCl3 was decomposed within approximately 100 minutes. At 440degC, approximately 60% of C2HCl3 was decomposed by the reaction with aluminium powder within approximately 100 minutes. At 440degC, reaction between C2HCl3 and CaO powder were occurred rapidly in an atmosphere of argon to form CaCl2 and free carbon. Also in an atmosphere of air, nearly the same result was obtained. In this reaction, CaCl2, CO and CO2 were formed. CH2Cl2 was also decomposed by the reaction with iron at the temperature between 380 and 440degC. In the reaction, FeCl2, carbon and hydrogen were formed. CH3+ and CH4 were observed during the dechlorinating reaction of CH2Cl2. Variation in particle size of iron powder such as 100, 150 and 250 mesh did not affect the reaction rate. (author)

  17. Method of processing chloride waste

    International Nuclear Information System (INIS)

    In a method of applying molten salt electrolysis to chloride wastes discharged from a electrolytic refining step of a dry reprocessing step for spent fuels, and removed with transuranium elements of long half-decaying time, metals capable of alloying with alkali and alkaline earth metals under melting by electrolysis are used as a cathode material, and an electrolytic temperature is made higher than the melting point of salts in a molten salt electrolysis bath, to recover Li, Ca and Na as alloys with the cathode material in a first electrolysis step. Then, the electrolytic temperature is made higher than the melting point of the chloride salts remained in the bath after the electrolysis step described above by using the cathode material, to recover Ba, Rb, Sr and Cs of nuclear fission products also as alloys with the cathode material in a second electrolysis step. Accordingly, the amount of wastes formed can be reduced, and the wastes contain no heat generating nuclear fission elements. (T.M.)

  18. Depth profiles of potassium and its isotope ratio (40K/K) in several forest soils

    International Nuclear Information System (INIS)

    Depth profiles potassium and its isotope ratio (40K/K)were investigated in several forest soils from different geological and climatic backgrounds. The ratio was found not to be constant (0.0117%) but varied appreciably from 0.0085% to 0.0167% among different soils. Possible factors affecting variability of 40K/K values were considered by a multivariate factor analysis which suggested that aqueous parameters like humidity and pH might be a controlling factor in the surface soils. The amount (and probably chemical forms) of iron oxide may be another one influencing 40K/K values in mineral components at deeper portions. (author)

  19. A New Method for the Determination of Potassium Sorbate Combining Fluorescence Spectra Method with PSO-BP Neural Network.

    Science.gov (United States)

    Wang, Shu-tao; Chen, Dong-ying; Wang, Xing-long; Wei, Meng; Wang, Zhi-fang

    2015-12-01

    In this paper, fluorescence spectra properties of potassium sorbate in aqueous solution and orange juice are studied, and the result.shows that in two solution there are many difference in fluorescence spectra of potassium sorbate, but the fluorescence characteristic peak exists in λ(ex)/λ(em) = 375/490 nm. It can be seen from the two dimensional fluorescence spectra that the relationship between the fluorescence intensity and the concentration of potassium sorbate is very complex, so there is no linear relationship between them. To determine the concentration of potassium sorbate in orange juice, a new method combining Particle Swarm Optimization (PSO) algorithm with Back Propagation (BP) neural network is proposed. The relative error of two predicted concentrations is 1.83% and 1.53% respectively, which indicate that the method is feasible. The PSO-BP neural network can accurately measure the concentration of potassium sorbate in orange juice in the range of 0.1-2.0 g · L⁻¹. PMID:26964248

  20. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construc...

  1. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this st...

  2. Potassium permanganate ingestion as a suicide attempt

    Directory of Open Access Journals (Sweden)

    Tuba Cimilli Ozturk

    2012-01-01

    Full Text Available Potassium permanganate is a highly corrosive, water-soluble oxidizing antiseptic. A 68- year-old female patient was admitted to our Emergency Department after ingestion of 3 tablets of 250 mg potassium permanganate as a suicide attempt. The physical exam revealed brown stained lesions in the oropharynx. Emergency endoscopy was performed by the gastroenterologist after the third hour of ingestion. Emergency endoscopy revealed multiple superficial (Grade I-II lesions on the esophagus and cardia, which were considered secondary to the caustic substance. The mainstay in the treatment of potassium permanganate is supportive and the immediate priority is to secure the airway. Emergency endoscopy is an important tool used to evaluate the location and severity of injury to the esophagus, stomach and duodenum after caustic ingestion. Patients with signs and symptoms of intentional ingestion should undergo endoscopy within 12 to 24 h to define the extent of the disease.

  3. Emission infrared spectra of molten potassium heptafluoroniobate

    Energy Technology Data Exchange (ETDEWEB)

    Agulyanskij, A.I.; Bessonova, V.A. (AN SSSR, Apatity. Kol' skij Filial)

    1984-01-01

    Emission infrared spectra of potassium heptafluoroniobate molten in the air, vacuum and inert gas atmosphere are obtained. The analysis of different sections of the in got as well as potassium heptafluoroniobate condensate obtained upon long remelting in the air has shown that the investigated phases have complex composition. Along with the heptafluoroniobate potassium oxyfluoroniobate, mainly K/sub 2/NbOF/sub 5/ is present in them, in case of condensate-KNbOF/sub 4/. The pyrohydrolysis process consists of two-mutually compensating each other stages, that is parallel to the oxyfluoroniobate production the process of their destruction and partial removal from the melting surface takes place. It is shown that hydrogen fluoride produced as a result of KNbF/sub 5/ pyrohydrolysis can affect to considerable extent the ion structure of the melt.

  4. Potassium Permanganate Poisoning: A Nonfatal Outcome.

    Science.gov (United States)

    Eteiwi, Suzan M; Al-Eyadah, Abdallah A; Al-Sarihin, Khaldon K; Al-Omari, Ahmad A; Al-Asaad, Rania A; Haddad, Fares H

    2015-07-01

    Acute poisoning by potassium permanganate is a rare condition with high morbidity and mortality. Diagnosis of the condition relies on a history of exposure or ingestion and a high degree of clinical suspicion. Oxygen desaturation and the presence of methemoglobin are also helpful indicators. Since no specific antidote is available, treatment is mainly supportive. Few cases have been reported in the literature following potassium permanganate ingestion, whether intentional or accidental, and most of the patients in these cases had unfavorable outcomes, which was not the case in our patient. Our patient, a 73-year-old male, purchased potassium permanganate over the counter mistaking it for magnesium salt, which he frequently used as a laxative. Several hours after he ingested it, he was admitted to the endocrine department at King Hussein Medical Center, Jordan, with acute rapidly evolving shortness of breath. During hospitalization, his liver function tests deteriorated. Since he was diagnosed early and managed promptly he had a favorable outcome. PMID:26366264

  5. Chloride (Cl-) ion-mediated shape control of palladium nanoparticles

    Science.gov (United States)

    Nalajala, Naresh; Chakraborty, Arup; Bera, Bapi; Neergat, Manoj

    2016-02-01

    The shape control of Pd nanoparticles is investigated using chloride (Cl-) ions as capping agents in an aqueous medium in the temperature range of 60-100 °C. With weakly adsorbing and strongly etching Cl- ions, oxygen plays a crucial role in shape control. The experimental factors considered are the concentration of the capping agents, reaction time and reaction atmosphere. Thus, Pd nanoparticles of various shapes with high selectivity can be synthesized. Moreover, the removal of Cl- ions from the nanoparticle surface is easier than that of Br- ions (moderately adsorbing and etching) and I- ions (strongly adsorbing and weakly etching). The cleaned Cl- ion-mediated shape-controlled Pd nanoparticles are electrochemically characterized and the order of the half-wave potential of the oxygen reduction reaction in oxygen-saturated 0.1 M HClO4 solution is of the same order as that observed with single-crystal Pd surfaces.

  6. Studies of potassium-promoted nickel catalysts for methane steam reforming: Effect of surface potassium location

    Science.gov (United States)

    Borowiecki, Tadeusz; Denis, Andrzej; Rawski, Michał; Gołębiowski, Andrzej; Stołecki, Kazimierz; Dmytrzyk, Jaromir; Kotarba, Andrzej

    2014-05-01

    The effect of potassium addition to the Ni/Al2O3 steam reforming catalyst has been investigated on several model systems, including K/Al2O3 with various amounts of alkali promoters (1-4 wt% of K2O), a model catalyst 90%NiO-10%Al2O3 promoted with potassium and a commercial catalyst. The potassium surface state and stability were investigated by means of the Species Resolved Thermal Alkali Desorption method (SR-TAD). The activity of the catalysts in the steam reforming of methane and their coking-resistance were also evaluated. The results reveal that the beneficial effect of potassium addition is strongly related to its location in the catalysts. The catalyst surface should be promoted with potassium in order to obtain high coking-resistant catalysts. Moreover, the catalyst preparation procedure should ensure a direct interaction of potassium with the Al2O3 support surface. Due to the low stability of potassium on θ-Al2O3 this phase is undesirable during the preparation of a stable steam reforming catalyst.

  7. Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy

    Energy Technology Data Exchange (ETDEWEB)

    Zaid, B. [Division de Technologie du Combustible, Departement de Metallurgie, Centre de Recherche Nucleaire de Draria, BP. 43 Seballa, Draria (Algeria)], E-mail: zaidbachir@yahoo.com; Saidi, D. [Division de Technologie du Combustible, Departement de Metallurgie, Centre de Recherche Nucleaire de Draria, BP. 43 Seballa, Draria (Algeria); Benzaid, A. [Divisionde Physique et Application Nucleaires, Departement Application Nucleaires, Centre de Recherche Nucleaire de Draria, BP. 43 Seballa, Draria (Algeria); Hadji, S. [Division de Technologie du Combustible, Departement du combustible, Centre de Recherche Nucleaire de Draria, BP. 43 Seballa, Draria (Algeria)

    2008-07-15

    Effects of pH solution and chloride (Cl{sup -}) ion concentration on the corrosion behaviour of alloy AA6061 immersed in aqueous solutions of NaCl have been investigated using measurements of weight loss, potentiodynamic polarisation, linear polarisation, cyclic polarisation experiment combined with open circuit potential transient technique and optical or scanning electron microscopy. The corrosion behaviour of the AA6061 aluminum alloy was found to be dependant on the pH and chloride concentration [NaCl] of solution. In acidic or slightly neutral solutions, general and pitting corrosion occurred simultaneously. In contrast, exposure to alkaline solutions results in general corrosion. Experience revealed that the alloy AA6061 was susceptible to pitting corrosion in all chloride solution of concentration ranging between 0.003 wt% and 5.5 wt% NaCl and an increase in the chloride concentration slightly shifted both the pitting E{sub pit} and corrosion E{sub cor} potentials to more active values. In function of the conditions of treatment, the sheets of the alloy AA6061 undergo two types of localised corrosion process, leading to the formation of hemispherical and crystallographic pits. Polarisation resistance measurements in acidic (pH = 2) and alkaline chloride solutions (pH = 12) which are in good agreement with those of weight loss, show that the corrosion kinetic is minimised in slightly neutral solutions (pH = 6)

  8. Improved Synthesis Of Potassium Beta' '-Alumina

    Science.gov (United States)

    Williams, Roger M.; Jeffries-Nakamura, Barbara; Ryan, Margaret A.; O'Connor, Dennis E.; Kisor, Adam; Underwood, Mark

    1996-01-01

    Improved formulations of precursor materials synthesize nearly-phase-pure potassium beta' '-alumina solid electrolyte (K-BASE) powder. Materials are microhomogeneous powders (or, alternatively, gels) containing K(+,) Mg(2+), and Al(3+). K-BASE powder produced used in potassium-working-fluid alkali-metal thermal-to-electric conversion (K-AMTEC), in which heat-input and heat-rejection temperatures lower than sodium-working-fluid AMTEC (Na-AMTEC). Additional potential use lies in purification of pottassium by removal of sodium and calcium.

  9. Ruthenium on chitosan: A recyclable heterogeneous catalyst for aqueous hydration of nitriles to amides

    Science.gov (United States)

    Ruthenium has been immobilized over chitosan by simply stirring an aqueous suspension of chitosan in water with ruthenium chloride and has been utilized for the oxidation of nitriles to amides; the hydration of nitriles occurs in high yield and excellent selectivity, which procee...

  10. Intermediate-scale 2D experimental investigation of in situ chemical oxidation using potassium permanganate for remediation of complex DNAPL source zones

    Science.gov (United States)

    Heiderscheidt, J. L.; Siegrist, R. L.; Illangasekare, T. H.

    2008-11-01

    In situ chemical oxidation is a technology that has been applied to speed up remediation of a contaminant source zone by inducing increased mass transfer from DNAPL sources into the aqueous phase for subsequent destruction. The DNAPL source zone can consist of one or more individual sources that may be present as an interconnected pool of high saturation, as a region of disconnected ganglia at residual saturation, or as combinations of these two morphologies. Potassium permanganate (KMnO 4) is a commonly employed oxidant that has been shown to rapidly destroy DNAPL compounds like PCE and TCE following second-order kinetics in an aqueous system. During the oxidation of a target DNAPL compound, or naturally occurring reduced species in the subsurface, manganese oxide (MnO 2) solids are produced. Research has shown that these manganese oxide solids may result in permeability reductions in the porous media thus reducing the ability for oxidant to be transported to individual DNAPL sources. It can also occur at the DNAPL-water interface, decreasing contact of the oxidant with the DNAPL. Additionally, MnO 2 formation at the DNAPL-water interface, and/or flow-bypassing as a result of permeability reductions around the source, may alter the mass transfer from the DNAPL into the aqueous phase, potentially diminishing the magnitude of any DNAPL mass depletion rate increase induced by oxidation. An experiment was performed in a two-dimensional (2D) sand-filled tank that included several discrete DNAPL source zones. Spatial and temporal monitoring of aqueous PCE, chloride, and permanganate concentrations was used to relate changes in mass depletion of, and mass flux, from DNAPL residual and pool source zones to chemical oxidation performance and MnO 2 formation. During the experiment, permeability changes were monitored throughout the 2D tank and these were related to MnO 2 deposition as measured through post-oxidation soil coring. Under the conditions of this experiment, Mn

  11. Leaching of complex sulphide concentrate in acidic cupric chloride solutions

    Institute of Scientific and Technical Information of China (English)

    M. TCHOUMOU; M. ROYNETTE

    2007-01-01

    The chemical analysis of a complex sulphide concentrate by emission spectrometry and X-ray diffraction shows that it contains essentially copper, lead, zinc and iron in the form of chalcopyrite, sphalerite and galena. A small amount of pyrite is also present in the ore but does not be detected with X-ray diffraction. The cupric chloride leaching of the sulphide concentrate at various durations and solid/liquid ratios at 100 ℃ shows that the rate of dissolution of the ore is the fastest in the first several hours, and after 12 h it does not evolve significantly. If oxygen is excluded from the aqueous cupric chloride solution during the leaching experiment at 100 ℃, the pyrite in the ore will not be leached. The determination of principal dissolved metals in the leaching liquor by flame atomic absorption spectrometry, and the chemical analysis of solid residues by emission spectrometry and X-ray diffraction allow to conclude that the rate of dissolution of the minerals contained in the complex sulphide concentrate are in the order of galena>sphalerite>chalcopyrite.

  12. Detecting Airborne Mercury by Use of Palladium Chloride

    Science.gov (United States)

    Ryan, Margaret; Shevade, Abhijit; Kisor, Adam; Homer, Margie; Jewell, April; Manatt, Kenneth; Torres, Julia; Soler, Jessica; Taylor, Charles

    2009-01-01

    Palladium chloride films have been found to be useful as alternatives to the gold films heretofore used to detect airborne elemental mercury at concentrations of the order of parts per billion (ppb). Somewhat more specifically, when suitably prepared palladium chloride films are exposed to parts-per-billion or larger concentrations of airborne mercury, their electrical resistances change by amounts large enough to be easily measurable. Because airborne mercury adversely affects health, it is desirable to be able to detect it with high sensitivity, especially in enclosed environments in which there is a risk of leakage of mercury from lamps or other equipment. The detection of mercury by use of gold films involves the formation of gold/mercury amalgam. Gold films offer adequate sensitivity for detection of airborne mercury and could easily be integrated into an electronic-nose system designed to operate in the temperature range of 23 to 28 C. Unfortunately, in order to regenerate a gold-film mercury sensor, one must heat it to a temperature of 200 C for several minutes in clean flowing air. In preparation for an experiment to demonstrate the present sensor concept, palladium chloride was deposited from an aqueous solution onto sets of gold electrodes and sintered in air to form a film. Then while using the gold electrodes to measure the electrical resistance of the films, the films were exposed, at a temperature of 25 C, to humidified air containing mercury at various concentrations from 0 to 35 ppb (see figure). The results of this and other experiments have been interpreted as signifying that sensors of this type can detect mercury in room-temperature air at concentrations of at least 2.5 ppb and can readily be regenerated at temperatures <40 C.

  13. Effect of different ions on the anodic behaviour of alloy 800 chloride solutions at high temperature

    International Nuclear Information System (INIS)

    The anodic behaviour and passivity breakdown of alloy 800 in sodium bicarbonate and sodium phosphate aqueous solutions were studied in the temperature range from 100 degrees C to 280 degrees C by means of electrochemical techniques. The effect of phosphate or bicarbonate additions on the pitting susceptibility and pitting morphology of the alloy in chloride solutions was also examined. Experiments were performed in the following solutions: 0.1M NaHCO3, at 100 degrees C, 200 degrees C, 280 degrees C; 0.06M NaH2PO4 + 0.04M Na2HPO4, at 100 degrees C, 200 degrees C and 280 degrees C, and 0.1M NaCl with different additions of bicarbonate ion (0.02M, 0.05M and 0.1M) and phosphate ion (0.01M, 0.05M and 0.1M) at 100 degrees C and 280 degrees C. The anodic polarization curves of alloy 800 in deaerated 0.1M NaHCO3 and 0.06M NaH2PO4 + 0.04M Na2HPO4 solutions exhibited a similar shape at all the tested temperatures. No localized or generalized corrosion was detected on the metallic surface after polarization. The results obtained in chloride plus bicarbonate and chloride plus phosphate mixtures showed that the pitting potential of alloy 800 in chloride solutions was increased by the presence of bicarbonate or phosphate ions. In those solutions where the inhibitor concentration in the mixture is equal or higher than the chloride concentration , the behaviour of the alloy is similar to the one observed in the absence of chlorides. Changes in pitting morphology were found in phosphate containing solutions, while the pits found in bicarbonate containing solutions were similar to those formed in pure chloride solutions. (author). 3 refs., 4 figs

  14. Preparation of CdTe nanocrystal-polymer composite microspheres in aqueous solution by dispersing method

    Institute of Scientific and Technical Information of China (English)

    LI Minjie; WANG Chunlei; HAN Kun; YANG Bai

    2005-01-01

    Highly fluorescent CdTe nanocrystals were synthesized in aqueous solution, and then processible CdTe nanocrystal-polymer composites were fabricated by coating the aqueous nanocrystals with copolymers of styrene and octadecyl-p-vinyl-benzyldimethylammonium chloride (SOV- DAC) directly. A dichloromethane solution of CdTe nano- crystal-polymer composites was dispersed in the aqueous solution of poly (vinyl alcohol) (PVA) generating highly fluorescent microspheres. Experimental parameters such as the concentration of nanocrystal-polymer composites, the concentration of PVA, and stirring speed which had important effect on the preparation of the microspheres were investigated in detail with fluorescent microscope characterization.

  15. A new ion exchanger for the removal of cesium from aqueous solutions

    International Nuclear Information System (INIS)

    A new exchange potassium copper nickel hexacyanoferrates(II) was prepared. It was characterized by chemical composition and surface area measurements. The removal of cesium from aqueous solution by ion exchange was studied as function of shaking time. pH and concentration of acids, salts and cesium. The data indicates high value of distribution coefficient over a wide range of pH, nitric and hydrochloric acids concentration and in the presence of higher concentration of Na and K ions. A potassium copper nickel hexacyanoferrate(II) column was also tested for elution of cesium using 8 M ammonium nitrate solution. (author)

  16. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after a...

  17. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei;

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  18. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.; Glasser, Fred P.

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements are...

  19. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect...

  20. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics...

  1. Properties of silver chloride track detectors

    International Nuclear Information System (INIS)

    The experiments on preparation of silver chloride track detectors and their properties are described. The results of X-ray structural analysis and data on sensitivity to charged particles and actinic light of silver chloride crystals, doped with several elements, are presented. (orig.)

  2. The effect on performance of fabrication parameter variations of thick-film screen printed silver/silver chloride potentiometric reference electrodes

    OpenAIRE

    Sophocleous, Marios; Glanc, Monika; Atkinson, John; Garcia-Breijo, Eduardo

    2013-01-01

    Thick-film screen printed silver-silver chloride (Ag/AgCl) reference electrodes have been fabricated and investigated as an alternative to liquid electrolyte Ag/AgCl reference electrodes. The performance of the electrodes was examined with variations of the potassium chloride (KCl) concentration in the final (top) layer of the electrode. Also, different types of binder (glass and polymer) were tested for the underlying Ag/AgCl layer. The addition of another layer on top of the KCl containing ...

  3. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used in continu......The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  4. Astrocytic Potassium Channels in CNS Disorders

    Czech Academy of Sciences Publication Activity Database

    Anděrová, Miroslava; Pivoňková, Helena

    New York : Nova Science Publishers, 2012 - (González-Pérez, O.), s. 17-36 ISBN 978-1-62081-585-4 Institutional research plan: CEZ:AV0Z50390512; CEZ:AV0Z50390703 Keywords : astroglia * potassium ion channels * CNS pathology Subject RIV: FH - Neurology

  5. Potassium - Multiple Languages: MedlinePlus

    Science.gov (United States)

    ... Chinese - Simplified (简体中文) Chinese - Traditional (繁體中文) Spanish (español) Chinese - Simplified (简体中文) Potassium Content of Common Foods (High) English 含高量钾质的食品(每份所含钾质多过200毫克) - 简体中文 (Chinese - Simplified) PDF ...

  6. Nutritional potassium requirement for laying Japanese quails

    Directory of Open Access Journals (Sweden)

    Fernando Guilherme Perazzo Costa

    2011-12-01

    Full Text Available The objective of this study was to evaluate the potassium requirement for laying Japanese quails. Two hundred and forty quails were distributed in a randomized block design, with five treatments and six replicates, with eight birds each. The treatments consisted of a basal diet deficient in potassium (K (2.50 g/kg, supplemented with potassium carbonate, to replace the inert, to reach levels of 2.50, 3.50, 4.50, 5.50 and 6.50 (g/kg of K in the diet. There was a quadratic effect of K levels on feed intake, egg production, egg mass and feed conversion per egg mass and per egg dozen, estimating the requirements of 4.26, 4.41, 4.38, 4.43 and 4.48 (g/kg of K diet, respectively. There was no significant effect on the levels of K in the diet on egg weight, albumen weight, percentage of yolk or shell and yolk color. However, yolk and shell weights reduced and the albumen percentage increased linearly with increasing levels of K in the diet. Despite the reduction of shell weight, the increased levels of K did not influence the specific gravity and shell thickness. The use of 4.41 g/kg of potassium is recommended in the diet for laying Japanese quails.

  7. Spectrophotometric Determination of Losartan Potassium in Tablets

    Directory of Open Access Journals (Sweden)

    Arianne Diane A. Aniñon

    2014-06-01

    Full Text Available In the quality control of pharmaceutical products, it is of utmost importance that validated analytical methods are used to ensure the credibility of the results generated. At the time of the study, official monographs from the United States Pharmacopeia and National Formulary (USP-NF for the quantification of Losartan potassium in tablets were unavailable, denoting the need for a validated analytical procedure for the analysis of the drug. The study adapted direct and first-derivative UV spectrophotometry methods proposed by Bonfilio and others (2010 for the assay of Losartan potassium in Losartan 50 mg. capsules, then modified and validated the said procedures for the assay of Losartan potassium in Losartan 100 mg. tablets following the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH guidelines on method validation for accuracy, precision, specificity, linearity, limit of detection, and limit of quantitation. Results demonstrated that all the performance characteristics of both methods were highly satisfactory and confirmed the possible application of the methods in routine analysis of Losartan potassium tablets.

  8. 21 CFR 184.1635 - Potassium iodate.

    Science.gov (United States)

    2010-04-01

    ...) The ingredient meets the specifications of the “Food Chemicals Codex,” 3d Ed. (1981), pp. 245-246... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium iodate. 184.1635 Section 184.1635 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  9. 21 CFR 184.1625 - Potassium citrate.

    Science.gov (United States)

    2010-04-01

    .... (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d ed. (1981), p. 242, which is incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium citrate. 184.1625 Section 184.1625...

  10. 21 CFR 184.1610 - Potassium alginate.

    Science.gov (United States)

    2010-04-01

    ... control agents. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium alginate. 184.1610 Section 184.1610 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  11. 21 CFR 184.1613 - Potassium bicarbonate.

    Science.gov (United States)

    2010-04-01

    ... dioxide. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 239... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium bicarbonate. 184.1613 Section 184.1613 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED)...

  12. 21 CFR 184.1634 - Potassium iodide.

    Science.gov (United States)

    2010-04-01

    ... ingredient meets the specifications of the “Food Chemicals Codex,” 3d Ed. (1981), pp. 246-247, which is... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Potassium iodide. 184.1634 Section 184.1634 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  13. Altered potassium homeostasis in Crohn's disease

    International Nuclear Information System (INIS)

    The total body potassium (TBK), serum potassium, and the number of red blood cell ouabain-binding sites was studied in 94 patients with Crohn's diease. TBK was measured by counting the endogenous 40K in a whole body counter. TBK was 87%+-13% in 94 patients was Crohn's disease, while in control subjects, it was 97%+-12% (n=24). This significant reduction in TBK was accompanied by normal serum potassium levels (4.4+-0.5 mM). TBK was significantly correlated with the Crohn's disease activity index (r=0.79, n=113, P3H-ouabain showed a significant increse in the number of Na-K pumps in Crohn's disease (396+-65, n=27) compared with the control group. 290+-45 (n=24). These results support the suggestion that changes in TBK may regulate the synthesis of Na-K pump molecules. The total body potassium depletion and the need for a preoperative nutritional support in Crohn's disease are discussed. (orig.)

  14. Potassium ferrate treatment of RFETS' contaminated groundwater

    International Nuclear Information System (INIS)

    The potassium ferrate treatment study of Rocky Flats Environmental Technology Site (RFETS) groundwater was performed under the Sitewide Treatability Studies Program (STSP). This study was undertaken to determine the effectiveness of potassium ferrate in a water treatment system to remove the contaminants of concern (COCS) from groundwater at the RFETS. Potassium ferrate is a simple salt where the iron is in the plus six valence state. It is the iron at the plus six valence state (Fe +6) that makes it an unique water treatment chemical, especially in waters where the pH is greater than seven. In basic solutions where the solubility of the oxides/hydroxides of many of the COCs is low, solids are formed as the pH is raised. By using ferrate these solids are agglomerated so they can be effectively removed by sedimentation in conventional water treatment equipment. The objective of this study was to determine the quality of water after treatment with potassium ferrate and to determine if the Colorado Water Quality Control Commission (CWQCC) discharge limits for the COCs listed in Table 1.0-1 could be met. Radionuclides in the groundwater were of special concern

  15. Calcium, magnesium, and potassium in food

    Science.gov (United States)

    The biochemical and physiological functions and consequences of deficient intakes, which show the nutritional importance of calcium, magnesium and potassium for humans, are reviewed. The dietary recommendations and food sources for these essential mineral elements for humans are presented. Factors t...

  16. Membrane chloride transport measured using a chloride-sensitive fluorescent probe

    International Nuclear Information System (INIS)

    Transport of chloride across cell membranes through exchange, cotransport, or conductive pathways is a subject of great biological importance. Current methods of measurement are restricted in their sensitivity, time resolution, and applicability. A new transport measurement technique has been developed on the basis of the fluorescence quenching by chloride of the dye 6-methoxy-N-(3-sulfopropyl)quinolinium (SPQ). SPQ fluorescence quenching by chloride is rapid and sensitive, with a greater than 50% decrease in fluorescence at 10 mM chloride. SPQ fluorescence is not altered by other physiological anions or by pH and can be used to measure both neutral and conductive transport processes. The high water solubility and membrane permeability properties of SPQ make it ideal for use in both membrane vesicles and cells. Chloride transport determined with SPQ was validated by measurement of erythrocyte chloride/anion exchange and membrane vesicle chloride conductance using 35SO4 uptake

  17. Ropivacaine-Induced Contraction Is Attenuated by Both Endothelial Nitric Oxide and Voltage-Dependent Potassium Channels in Isolated Rat Aortae

    Directory of Open Access Journals (Sweden)

    Seong-Ho Ok

    2013-01-01

    Full Text Available This study investigated endothelium-derived vasodilators and potassium channels involved in the modulation of ropivacaine-induced contraction. In endothelium-intact rat aortae, ropivacaine concentration-response curves were generated in the presence or absence of the following inhibitors: the nonspecific nitric oxide synthase (NOS inhibitor Nω-nitro-L-arginine methyl ester (L-NAME, the neuronal NOS inhibitor Nω-propyl-L-arginine hydrochloride, the inducible NOS inhibitor 1400W dihydrochloride, the nitric oxide-sensitive guanylyl cyclase (GC inhibitor ODQ, the NOS and GC inhibitor methylene blue, the phosphoinositide-3 kinase inhibitor wortmannin, the cytochrome p450 epoxygenase inhibitor fluconazole, the voltage-dependent potassium channel inhibitor 4-aminopyridine (4-AP, the calcium-activated potassium channel inhibitor tetraethylammonium (TEA, the inward-rectifying potassium channel inhibitor barium chloride, and the ATP-sensitive potassium channel inhibitor glibenclamide. The effect of ropivacaine on endothelial nitric oxide synthase (eNOS phosphorylation in human umbilical vein endothelial cells was examined by western blotting. Ropivacaine-induced contraction was weaker in endothelium-intact aortae than in endothelium-denuded aortae. L-NAME, ODQ, and methylene blue enhanced ropivacaine-induced contraction, whereas wortmannin, Nω-propyl-L-arginine hydrochloride, 1400W dihydrochloride, and fluconazole had no effect. 4-AP and TEA enhanced ropivacaine-induced contraction; however, barium chloride and glibenclamide had no effect. eNOS phosphorylation was induced by ropivacaine. These results suggest that ropivacaine-induced contraction is attenuated primarily by both endothelial nitric oxide and voltage-dependent potassium channels.

  18. Thermodiffusive behaviour of NaCl and KCl aqueous solutions a model for the Na-K pump

    International Nuclear Information System (INIS)

    In NaCl and KCl aqueous nonisothermal solutions K+ inverts its sense of migration within the physiological concentration range; Na+ behaves similarly at much lower concentrations. These findings are discussed in relation to solute induced modifications of water structure and of their influence on thermal diffusion. A possible evolutionary model of a thermodiffusive mechanism for the sodium potassium pump is also suggested

  19. 21 CFR 520.1696d - Penicillin V potassium tablets.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Penicillin V potassium tablets. 520.1696d Section... Penicillin V potassium tablets. (a) Specifications. Each tablet contains penicillin V potassium equivalent to 125 milligrams (200,000 units) or 250 milligrams (400,000 units) of penicillin V. (b) Sponsors....

  20. 21 CFR 181.34 - Sodium nitrite and potassium nitrite.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium nitrite and potassium nitrite. 181.34...-Sanctioned Food Ingredients § 181.34 Sodium nitrite and potassium nitrite. Sodium nitrite and potassium nitrite are subject to prior sanctions issued by the U.S. Department of Agriculture for use as...