WorldWideScience

Sample records for apres irradiation corporelle

  1. Recovery and radio-resistance in mice after external irradiation; Restauration et radio-resistance chez la souris apres irradiation externe

    Energy Technology Data Exchange (ETDEWEB)

    Le Guillou, S [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author presents a literature study concerning recovery from external irradiation and an analysis of experimental data (which appear to suggest the idea of a radio-resistance in animals), as well as the hypotheses put forward for explaining this phenomenon. The author then describes an experiment carried out on mice whose LD 50/30 days increased from 1005 to 1380 rads and for which it was shown that an increase occurs in the number of certain anti-bodies circulating after a low dose of {gamma} irradiation. (author) [French] L'auteur presente une etude bibliographique de la restauration apres irradiation externe et une analyse des donnees experimentales qui paraissent suggerer la notion de radioresistance chez les animaux ainsi que les hypotheses cherchant a expliquer ce phenomene. Il relate ensuite une experience realisee sur des souris dont la DL 50/30 jours est passee de 1005 a 1380 rads et dans laquelle est montree l'augmentation de certains anticorps circulant apres une faible dose d'irradiation gamma. (auteur)

  2. Recovery and radio-resistance in mice after external irradiation; Restauration et radio-resistance chez la souris apres irradiation externe

    Energy Technology Data Exchange (ETDEWEB)

    Le Guillou, S. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author presents a literature study concerning recovery from external irradiation and an analysis of experimental data (which appear to suggest the idea of a radio-resistance in animals), as well as the hypotheses put forward for explaining this phenomenon. The author then describes an experiment carried out on mice whose LD 50/30 days increased from 1005 to 1380 rads and for which it was shown that an increase occurs in the number of certain anti-bodies circulating after a low dose of {gamma} irradiation. (author) [French] L'auteur presente une etude bibliographique de la restauration apres irradiation externe et une analyse des donnees experimentales qui paraissent suggerer la notion de radioresistance chez les animaux ainsi que les hypotheses cherchant a expliquer ce phenomene. Il relate ensuite une experience realisee sur des souris dont la DL 50/30 jours est passee de 1005 a 1380 rads et dans laquelle est montree l'augmentation de certains anticorps circulant apres une faible dose d'irradiation gamma. (auteur)

  3. Behaviour of BF{sub 3} counters after in-pile irradiation; Comportement de compteurs a BF{sub 3} apres irradiation dans un reacteur

    Energy Technology Data Exchange (ETDEWEB)

    Verdant, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The behaviour of a proportional BF{sub 3}LCT 14 NE 31 counter with aluminium cathode has been studied after irradiation from 10{sup 5} to 10{sup 6} n.cm{sup -2} in the swimming-pool reactor Triton. The pulse spectrum was only slightly modified by two successive irradiations at 10{sup 15} n.cm{sup -2}, and 1 hour after the end of the irradiation the decrease in sensitivity reached 10 to 20 per cent. One hour after irradiation at 10{sup 16} n.cm{sup -2} this decrease was 20 per cent but the pulse spectrum was affected. The advantages of an aluminium cathode with respect to a standard counter using a copper cathode and irradiated under the same conditions are given. Beforehand, it had been established that the limit for use of an aluminium-cathode counter in the presence of {gamma} radiation is about 200 R.h{sup -1}. (author) [French] Le comportement d'un compteur proportionnel a BF-3LCT 14 NE 31, a cathode d'aluminium, a ete etudie apres des irradiations de 10{sup 5} a 10{sup 6} n.cm{sup -2} dans la pile-piscine TRITON. Deux irradiations successives de 10{sup 15} n.cm{sup -2} ont peu modifie le spectre des impulsions et 1 heure apres la fin de l'exposition la perte de sensibilite etait de 10 a 20 pour cent. Une heure apres une irradiation de 10{sup 16} n.cm{sup -2}, cette perte etait de 20 pour cent mais le spectre d'impulsions etait perturbe. L'avantage d'une cathode en aluminium est mis en evidence par comparaison avec un compteur standard a cathode de cuivre irradie dans les memes conditions. En preliminaire, on avait etabli que la limite d'utilisation d'un compteur a cathode d'aluminium en presence de rayonnements {gamma} etait de l'ordre de 200 R.h{sup -1}. (auteur)

  4. Evolution of glycaemia in the rat after gamma irradiation; Evolution de la glycemie chez le rat apres irradiation gamma

    Energy Technology Data Exchange (ETDEWEB)

    Marble, G; Frossard, H; Breuil, L; Engler, R [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    The study of glycaemia variations in the rat after irradiation has made it possible to observe not only a premature hyperglycemia but also a belated hypoglycemia whose importance and subsequent evolution seem to depend on the dose given to the animal. (authors) [French] L'etude des variations de la glycemie du rat apres irradiation a permis de noter une hyperglycemie precoce mais egalement une hypoglycemie retardee dont l'amplitude et l'evolution seraient fonction de la dose delivree a l'animal. (auteurs)

  5. Total body irradiation: current indications; L`irradiation corporelle totale: les indications actuelles

    Energy Technology Data Exchange (ETDEWEB)

    Giraud, P.; Danhier, S.; Dubray, B.; Cosset, J.M. [Institut Curie, 75 - Paris (France)

    1998-05-01

    The choice of dose and fractionation for total body irradiation is made difficult by the large number of considerations to be taken into account. The outcome of bone marrow transplantation after total body irradiation can be understood in terms of tumor cell killing, engraftment, and normal tissue damage, each of these endpoints being influenced by irradiation-, disease-, transplant-, and patient- related factors. Interpretation of clinical data is further hampered by the overwhelming influence of logistic constraints, the small numbers of randomized studies, and the concomitant variations in total dose and fraction size or dose rate. So far, three cautious conclusions can be drawn in order to tentatively adapt the total body irradiation schedule to clinically-relevant situations. Firstly, the organs at risk for normal tissue damage (lung, liver, lens, kidney) are protected by delivering small doses per fraction at low dose rate. This suggests that, when toxicity is at stake (e.g. in children), fractionated irradiation should be preferred, provided that inter-fraction intervals are long enough. Secondly, fractionated irradiation should be avoided in case of T-cell depleted transplant, given the high risk of graft rejection in this setting. An alternative would be to increase total (or fractional) dose of fractionated total body irradiation, but this approach is likely to induce more normal tissue toxicity. Thirdly, clinical data have shown higher relapse rates in chronic myeloid leukemia after fractionated or low dose rate total body irradiation, suggesting that fractionated irradiation should not be recommended, unless total (or fractional) dose is increased. Total body irradiation-containing regimens, primarily cyclophosphamide / total body irradiation, are either equivalent to or better than the chemotherapy-only regimens, primarily busulfan / cyclophosphamide. Busulfan / cyclophosphamide certainly represents a reasonable alternative, especially in patients who

  6. L’opinion des étudiants en médecine de Québec sur les punitions corporelles

    Science.gov (United States)

    Labbé, Jean; Laflamme, Nathalie; Makosso-Kallyth, Sun

    2012-01-01

    OBJECTIF : L’objectif de la présente étude est de décrire l’opinion des étudiants en médecine de l’Université Laval sur le sujet controversé des punitions corporelles envers les enfants. MÉTHODOLOGIE : Un sondage a été réalisé auprès des étudiants en quatrième année de médecine de l’Université Laval pendant cinq années consécutives, soit de l’année scolaire 2006–2007 jusqu’à celle de 2010–2011 inclusivement, à l’occasion d’un séminaire portant sur la maltraitance envers les enfants. RÉSULTATS : Sur les 712 étudiants interrogés, 74 % étaient de sexe féminin et 91 % étaient âgés de moins de 30 ans. Concernant les punitions corporelles envers les enfants, 22 % des répondants s’y sont déclarés favorables. Plus de garçons que de filles se sont prononcés en faveur de cette pratique disciplinaire, soit 31 % des garçons par rapport à 18 % des filles respectivement (RC rajusté = 2,2, IC 95 % :1,4 à 3,4; p=0,0003). Près de 36 % des étudiants ayant eu des punitions corporelles y étaient favorables, comparativement à seulement 4 % de ceux qui n’avaient pas connu cette forme de discipline (RC rajusté = 16,5, IC 95 % :8,6 à 31,4; p<0,0001). Parmi ceux qui ont mentionné avoir été victimes d’abus physique, 25 % se sont déclarés en faveur de cette pratique, ce qui est similaire au 21 % observés chez ceux qui n’en ont pas été victimes (p=0,52). CONCLUSION : Alors que plusieurs organismes médicaux se sont prononcés contre l’utilisation des punitions corporelles, plus d’un futur médecin sur cinq à Québec se déclare favorable à cette méthode disciplinaire et pourrait influencer la conduite des parents en ce sens. PMID:24179417

  7. Total body irradiation: what schedule(s). Les irradiations corporelles totales: quel(s) schema(s)

    Energy Technology Data Exchange (ETDEWEB)

    Cosset, J M [Institut Curie, 75 - Paris (France)

    1993-01-01

    In this article, the author explains why a whole-body irradiation is still an essential step before a bone marrow graft. He presents irradiation protocols for acute myeloid leukemia and chronic myeloid leukemia. 14 refs.

  8. Radiation therapy in leukemia (total body irradiation excluded); Irradiations pour leucemie a l`exclusion de l`irradiation corporelle totale

    Energy Technology Data Exchange (ETDEWEB)

    Peiffert, D.; Hoffstetter, S. [Centre Alexis-Vautrin, 54 - Vandoeuvre-les-Nancy (France). Dept. de Radiotherapie

    1999-03-01

    Radiation techniques and indications in leukemias have been described in detail, yet prophylactic cranial irradiation in acute leukemia still has few indications. Cerebrospinal and testicular irradiation are reserved for relapsing disease. Radiation usually results in rapid functional improvement when used in neurologic emergencies and symptomatic neurologic or gross tumors relapses. Nevertheless, the improvements recently obtained by systemic chemotherapy have resulted in the reduction in the use of irradiation, especially in children, where it was considered deleterious with neuropsychological sequelae. Splenic irradiation remains useful for symptomatic myelo-proliferative syndrome. (authors)

  9. A prospective study of the early clinical symptoms following a 2 Gy therapeutic whole-body irradiation; Etude prospective de la symptomatologie clinique precoce apres irradiation corporelle totale therapeutique de 2 Gy

    Energy Technology Data Exchange (ETDEWEB)

    Fizazi, K.; Chaillet, M.P.; Fourquet, A.; Jammet, P.; Cosset, J.M. [Institut Curie, 75 - Paris (France)

    1995-10-01

    Early human tolerance following total body irradiation (TBI) according to the dose received is still poorly known. Thirteen selected patients were prospectively evaluated for clinical side effects during the first 10 hours following a 2 Gy TBI prior to bone marrow transplantation. All of them but one were treated for haematological malignancies and were in clinical remission at the date of TBI. There were 10 males and 3 females, with a median age of 43 y (range 16*61) and a good performance status (WHO 0-1). They received granisetron (3 mg) injected intravenously 1 h before the time of TBI in order to prevent nausea and vomiting. The main symptoms consisted in drowsiness (69%), headache (62%), xerostomia (62%), nausea and vomiting (46%), anorexia (38%), parotid gland pain (23%) and abdominal pain (8%). Their intensity was always moderate, except for 2 patients who experimented severe vomiting. The incidence rate and the time-course of the symptoms of the prodromal phase may proved to be helpful for early clinical evaluation and triage of victims of an accidental irradiation. In particular, absence of fever at the 6{sup th} h after TBI supports the assumption of an estimated exposure dose below 2 Gy. (authors). 23 refs., 2 tabs.

  10. Inhibition of Pseudomonas aeruginosa virulence: characterization of the AprA-AprI interface and species selectivity.

    Science.gov (United States)

    Bardoel, Bart W; van Kessel, Kok P M; van Strijp, Jos A G; Milder, Fin J

    2012-01-20

    Pseudomonas aeruginosa secretes the virulence factor alkaline protease (AprA) to enhance its survival. AprA cleaves one of the key microbial recognition molecules, monomeric flagellin, and thereby diminishes Toll-like receptor 5 activation. In addition, AprA degrades host proteins such as complement proteins and cytokines. P. aeruginosa encodes a highly potent inhibitor of alkaline protease (AprI) that is solely located in the periplasm where it is presumed to protect periplasmic proteins against secreted AprA. We set out to study the enzyme-inhibitor interactions in more detail in order to provide a basis for future drug development. Structural and mutational studies reveal that the conserved N-terminal residues of AprI occupy the protease active site and are essential for inhibitory activity. We constructed peptides mimicking the N-terminus of AprI; however, these were incapable of inhibiting AprA-mediated flagellin cleavage. Furthermore, we expressed and purified AprI of P. aeruginosa and the homologous (37% sequence identity) AprI of Pseudomonas syringae, which remarkably show species specificity for their cognate protease. Exchange of the first five N-terminal residues between AprI of P. syringae and P. aeruginosa did not affect the observed specificity, whereas exchange of only six residues located at the AprI surface that contacts the protease did abolish specificity. These findings are elementary steps toward the design of molecules derived from the natural inhibitor of the virulence factor AprA and their use in therapeutic applications in Pseudomonas and other Gram-negative infections. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Respirators: APR Issuer Self Study 33461

    Energy Technology Data Exchange (ETDEWEB)

    Chochoms, Michael [Los Alamos National Laboratory

    2016-07-13

    Respirators: APR Issuer Self-Study (course 33461) is designed to introduce and familiarize employees selected as air-purifying respirator (APR) issuers at Los Alamos National Laboratory (LANL) with the responsibilities, limitations, procedures, and resources for issuing APRs at LANL. The goal is to enable these issuers to consistently provide proper, functioning APRs to authorized users

  12. A Study on Conjugate Heat Transfer Analysis of Reactor Vessel including Irradiated Structural Heat Source

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Kunwoo; Cho, Hyuksu; Im, Inyoung; Kim, Eunkee [KEPCO EnC, Daejeon (Korea, Republic of)

    2015-10-15

    Though Material reliability programs (MRPs) have a purpose to provide the evaluation or management methodologies for the operating RVI, the similar evaluation methodologies can be applied to the APR1400 fleet in the design stage for the evaluation of neutron irradiation effects. The purposes of this study are: to predict the thermal behavior whether or not irradiated structure heat source; to evaluate effective thermal conductivity (ETC) in relation to isotropic and anisotropic conductivity of porous media for APR1400 Reactor Vessel. The CFD simulations are performed so as to evaluate thermal behavior whether or not irradiated structure heat source and effective thermal conductivity for APR1400 Reactor Vessel. In respective of using irradiated structure heat source, the maximum temperature of fluid and core shroud for isotropic ETC are 325.8 .deg. C, 341.5 .deg. C. The total amount of irradiated structure heat source is about 5.41 MWth and not effect to fluid temperature.

  13. Design Characteristics of Soft Control for APR+

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yongsoo; Sung, Chanho; Jung, Yeonsub [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    In the global nuclear industry, the design requirements have been largely divided into the US and the European ones. The APR+ design, based on the proven APR1400 design, was developed to fully comply with the US regulatory and utility requirements. It was also developed to improve the technical competitiveness and enlarge the export market share through design uniqueness and the improvement of safety. The robust design of safety and its validation were requested Post-Fukushima accident. So MMIS design and validation for reinforcing safety were accomplished in APR+ development project. In this paper, the design characteristics of soft control for APR+ are presented to enhance the safety of MMIS design. In this paper, the major design characteristics of soft control for APR+ were introduced to increase the safety of MMIS design. In addition to the design characteristics of soft control described above, the following should be investigated closely for APR+ to get into the global nuclear industry.

  14. Design Characteristics of Soft Control for APR+

    International Nuclear Information System (INIS)

    Kim, Yongsoo; Sung, Chanho; Jung, Yeonsub

    2016-01-01

    In the global nuclear industry, the design requirements have been largely divided into the US and the European ones. The APR+ design, based on the proven APR1400 design, was developed to fully comply with the US regulatory and utility requirements. It was also developed to improve the technical competitiveness and enlarge the export market share through design uniqueness and the improvement of safety. The robust design of safety and its validation were requested Post-Fukushima accident. So MMIS design and validation for reinforcing safety were accomplished in APR+ development project. In this paper, the design characteristics of soft control for APR+ are presented to enhance the safety of MMIS design. In this paper, the major design characteristics of soft control for APR+ were introduced to increase the safety of MMIS design. In addition to the design characteristics of soft control described above, the following should be investigated closely for APR+ to get into the global nuclear industry

  15. PAEDIATRIC URETERIC CALCULI: IN-SITU EXTRACORPOREAL ...

    African Journals Online (AJOL)

    Il navait ni obstruction urétérale ni infection urinaire. De légères hématuries et coliques transitoires ont été observées après la lithotripsie. Conclusion Chez lenfant, la lithotripsie extra-corporelle in situ est une procédure efficace dans le traitement des calculs urétéraux quelque soit le siège. Il ny a aucune morbidité liée à la ...

  16. Evaluation Methodology for Void Swelling Susceptibility of APR1400 Reactor Vessel Internals for U.S. NRC Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, Hyeong Do; Lee, Do Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The APR1400 RVI (Reactor Vessel Internals) operates in harsh conditions, such as long term exposure to neutron irradiation, high temperatures, reactor coolant environment, and other operating loads. Therefore, even though the RVI components are mainly made of austenitic stainless steel which is well known to have good mechanical and corrosion-resistive properties, these operating conditions. The aging is characterized by a chromium depletion along grain boundaries of austenitic stainless steel, a decrease in ductility and fracture toughness of the steel, an increase in yield and ultimate strength of the steel, and a potential volume change due to void formation in the steel. For these reasons, under certain conditions of stress, temperature, and level of irradiation, the void swelling which is one of the challenging degradation mechanisms affecting the integrity of the RVI may appear at specific locations of the RVI, especially due to high neutron fluence and high temperature under localized gamma heating and low velocity of coolant flow. To assess the effects of operating neutron fluences, temperatures and stresses on the material properties changes and the susceptibility to the void swelling, the evaluation methodology of the APR1400 RVI components for U.S. NRC Design Certification was suggested in this paper. The approach to the evaluation is summarized as follows: 1. RVI component list of the APR1400 is collected. 2. Initial screening to determine the evaluation scope is completed using the design values of fluences. 3. Functionality assessments (radiation transport analysis, CFD analysis, structural analysis) are sequentially performed. 4. Susceptibility to the void swelling is identified through ANSYS/USERMAT module. KHNP believes that the proposed methodology which is based on the EPRI works for operating reactors is the best way to evaluate the void swelling for new reactors such as the APR1400.

  17. Development of Core Simulator (CoSi) for APR1400 And Analysis of LPPT Result using APR1400-CoSi

    International Nuclear Information System (INIS)

    Moon, Sang-Rae; Kim, Yong-Bae; Lee, Eun-Ki

    2014-01-01

    According to NRC guidelines, Low Power Physics Test (LPPT) is required to be performed in low temperature/low pressure (160 .deg. C/42.2 kg/cm 2 ) as well as NOT/NOP (291.3 .deg. C/158.2 kg/cm 2 ) because Shin-Kori Unit 3 is FOAK nuclear power plant. Low Power Physics Test (LPPT) is essential to verify the nuclear design and robustness of reactor safety. LPPT consists of initial criticality, Point of Adding Heat (POAH), All Rod Out (ARO) Boron Concentration, Isothermal Temperature Coefficient (ITC), Control Rod Worth measurements and so on. KHNP-CRI has developed the Core Simulator for APR1400 (APR1400-CoSi) in order to improve the ability performing the LPPT. Especially, APR1400-CoSi has enhanced capability to calculate the full Core neutronic parameters by revising RAST-K that is three dimensional real time core kinetic program. APR1400-CoSi has been developed for education-training of Low Power Physics Test(LPPT). Particularly, APR1400-CoSi has an enhanced capability to calculate the full core neutronic parameters by revising RAST-K which is a three dimensional real time core kinetics program. Low Power Physics Test (LPPT) was performed using APR1400-CoSi and the results showed very similar values with the predicted ones. In other words, the initial core model of Shin-Kori Unit 3 in APR1400-CoSi system has been verified to be appropriate enough. Also, it was confirmed that the test range of Low Power Physics Test (LPPT) reamains effective even though the largest incremental bank reactivity is inserted in core by analyzing the power change during the rod SWAP test

  18. Development of Reactor Coolant Pump for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Sang-Youn; Chu, Sung-Min; Chang, Jin-Young [Doosan Heavy Industries and Construction, Changwon (Korea, Republic of)

    2015-10-15

    The development was focused on the performance requirements for APR1400 and to achieve the goals of the safety, reliability and adaptability for APR1400 system design. In addition, APR1400 RCP design was customized considering convenience of installation, operation and maintainability. This paper describes the details of the development process, improved design feature and type test results. Based on development of core technology of RCP, DOOSAN supplies the localized and improved APR1400 RCP to Shin-Hanul 1 and 2 Project. This would be good experience that the RCP core technology can break foreign monopoly in supplying the domestic nuclear industry. Also, there expect APR1400 RCP can be sustainable revenue models in nuclear industry. Moreover, development of RCP will be a catalyst to enhance design capacity for equipment and system of nuclear power plant as well as evaluation and verification skills of Korean nuclear industry.

  19. Evolution of glycaemia during irradiation syndrome; Evolution de la glycemie au cours du syndrome d'irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Raisonnier, A [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

    1967-03-15

    The evolution of glycaemia following irradiation has been followed in the rat and pig. The results concerning a case of human accidental exposure have also been included. The author has tried to see whether the observed variations are reproducible and have a prognostic value. (author) [French] L'evolution de la glycemie a ete suivie, chez le rat et le porc, apres irradiation. Les resultats relatifs a une irradiation accidentelle humaine sont egalement rapportes. L'auteur cherche a definir si les variations observees sont reproductibles et ont une valeur pronostique. (auteur)

  20. Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

    Energy Technology Data Exchange (ETDEWEB)

    Vaiman, M; Guenet, J -L; Maas, J; Nizza, P

    1966-05-01

    Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

  1. Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

    Energy Technology Data Exchange (ETDEWEB)

    Vaiman, M.; Guenet, J.-L.; Maas, J.; Nizza, P

    1966-05-01

    Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

  2. ITAAC Development for APR1400 NRC Design Certification

    International Nuclear Information System (INIS)

    Kim, Jin Kwon; Kim, Myoung Ki

    2013-01-01

    ITAAC (Inspections, Tests, Analyses and Acceptance Criteria) is essential document for Design Certification, which is certified by NRC and ruled as the Appendix of the 10 CFR Part 52. Approximately 870 ITAAC items were selected for APR1400 Design Certification to be submitted to NRC. In this paper, the code and standard related to ITAAC and process of ITACC development are discussed to seek the way to complete the best ITAAC to get the Design Certification of APR1400 from NRC through the lessons learned from other competitive applicants. For saving the time and manpower to complete ITAAC of APR1400 NRC DC and reduction of the RAIs (Request Additional Information) from NRC, we took advantage of the lessons learned from the competitive designs like US-APWR and AP1000 based on KNGR ITAAC. Finally new and different ITAAC from ITAAC of KNGR was developed for APR1400 DC from NRC. RG 1.206 and SRPs were applied first in Korea to the APR1400 DCD preparation. For testability and acceptability check, ITAAC V and V table was completed by the system designers. APR1400 DCD will be submitted by the end of September this year and we hope that NRC issues lees RAIs on ITAAC document

  3. Evolution of glycaemia during irradiation syndrome; Evolution de la glycemie au cours du syndrome d'irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Raisonnier, A. [Commissariat a l' Energie Atomique, Fontenay aux Roses (France). Centre d' Etudes Nucleaires

    1967-03-15

    The evolution of glycaemia following irradiation has been followed in the rat and pig. The results concerning a case of human accidental exposure have also been included. The author has tried to see whether the observed variations are reproducible and have a prognostic value. (author) [French] L'evolution de la glycemie a ete suivie, chez le rat et le porc, apres irradiation. Les resultats relatifs a une irradiation accidentelle humaine sont egalement rapportes. L'auteur cherche a definir si les variations observees sont reproductibles et ont une valeur pronostique. (auteur)

  4. Optimization Strategy of the APR+ BOP Technical Specifications

    International Nuclear Information System (INIS)

    Cho, Yoon Sang; Lee, Jae Gon; Han, Sung Heum

    2016-01-01

    The BOP is one of the key factors for successful project implementation of NPP. In constructing the APR1400 NPP, the BOP procurement has been one of the biggest concerns. Due to the design changes and increased capacity of equipment in NPP, lots of BOPs should be ‘first supplied equipment’ [hereinafter, ‘FSE’]. The manufacture-ability, and the performances of FSEs have not been fully proved and tested, manufacturers and suppliers are requested to submit Reports for Equipment Qualification Evaluation in accordance with 10 CFR 50.49, IEEE 323. They need at least 1-2 years’ tests for Environment Qualification (EQ) and Seismic Qualification (SQ). This study is focused how to prepare the BOP purchase specifications in order to control the FSEs, especially in safety class equipment. With the optimization plan for BOP packages of this study, the FSEs’ occurrence can be reasonably controlled as low as possible. For successful NPP project, the concerns in procuring BOPs shall be fully analyzed beforehand. Now Korea is preparing new era of APR+, with closing the time of APR1400. The technical specification of APR+ BOPs can be developed and prepared successfully and very effectively according to this optimization plan. This will be a great contribution not only in constructing APR+ in time, but also in exporting APR+ overseas, all over the world in the future

  5. Optimization Strategy of the APR+ BOP Technical Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yoon Sang; Lee, Jae Gon; Han, Sung Heum [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The BOP is one of the key factors for successful project implementation of NPP. In constructing the APR1400 NPP, the BOP procurement has been one of the biggest concerns. Due to the design changes and increased capacity of equipment in NPP, lots of BOPs should be ‘first supplied equipment’ [hereinafter, ‘FSE’]. The manufacture-ability, and the performances of FSEs have not been fully proved and tested, manufacturers and suppliers are requested to submit Reports for Equipment Qualification Evaluation in accordance with 10 CFR 50.49, IEEE 323. They need at least 1-2 years’ tests for Environment Qualification (EQ) and Seismic Qualification (SQ). This study is focused how to prepare the BOP purchase specifications in order to control the FSEs, especially in safety class equipment. With the optimization plan for BOP packages of this study, the FSEs’ occurrence can be reasonably controlled as low as possible. For successful NPP project, the concerns in procuring BOPs shall be fully analyzed beforehand. Now Korea is preparing new era of APR+, with closing the time of APR1400. The technical specification of APR+ BOPs can be developed and prepared successfully and very effectively according to this optimization plan. This will be a great contribution not only in constructing APR+ in time, but also in exporting APR+ overseas, all over the world in the future.

  6. The APR1400 Core Design by Using APA Code System

    International Nuclear Information System (INIS)

    Choi, Yu Sun; Koh, Byung Marn

    2008-01-01

    The nuclear design for APR1400 has been performed to prepare the core model for Automatic Load Follow Operation Simulation. APA (ALPHA/ PHOENIXP/ ANC) code system is a tool for the multi-cycle depletion calculations for APR1400. Its detail versions for ALPHA, PHOENIX-P and ANC are 8.9.3, 8.6.1 and 8.10.5, respectively. The first and equilibrium core depletion calculations for APR1400 have been performed to assure the target cycle length and confirm the safety parameters. The parameters are satisfied within limitation about nuclear design criteria. This APR1400 core models will be based on the design parameters for APR1400 Simulator

  7. Antenna Pattern Range (APR)

    Data.gov (United States)

    Federal Laboratory Consortium — TheAntenna Pattern Range (APR)features a non-metallic arch with a trolley to move the transmit antenna from the horizon to zenith. At the center of the ground plane,...

  8. Diagnostic Strategy in APR1400

    International Nuclear Information System (INIS)

    Kim, Dongyoung; Kim, Jonghyun

    2013-01-01

    These features may bring out changes in operator tasks, changing the characteristics of tasks, or creating new tasks. Diagnostic strategy for identifying anomaly may be different especially in APR1400 from that in the analog control room due to the change of human-system interface, i.e. alarm system and display system. Since the first plant of APR1400 is being built at this moment, it is not known what strategies the operators will adopt in diagnosis tasks in the new operating environment. In this light, this paper aims at investigating operator's diagnostic strategies which are appropriate for APR1400. In order to collect data, several different approaches which are complementary are used to identify diagnostic strategies in the digital control room: analysis on audio/video recording of operation, observation in the simulator, and interview with the operators. The result shows that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of strategies, mostly, by getting more support from the computerized system. This paper investigated how the digitalized control room may influence operator's diagnostic strategies. Several different approaches, i. e., audio/video record, observation of training, and the interview with operators, were used to gather information about the operator's behaviors. As a conclusion, this paper figured out that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of the strategies, mostly, by getting more support from the computerized system. The operators interviewed also commented that the diagnosis in the APR1400 is quicker, more correct, and easier, compared with the analog control room

  9. Evaluation of irradiated coating material specimens

    International Nuclear Information System (INIS)

    Lee, Yong Jin; Nam, Seok Woo; Cho, Lee Moon

    2007-12-01

    Evaluation result of irradiated coating material specimens - Coating material specimens radiated Gamma Energy(Co 60) in air condition. - Evaluation conditions was above 1 X 10 4 Gy/hr, and radiated TID 2.0 X 10 6 Gy. - The radiated coating material specimens, No Checking, Cracking, Flaking, Delamination, Peeling and Blistering. - Coating system at the Kori no. 1 and APR 1400 Nuclear power plant, evaluation of irradiated coating materials is in accordance with owner's requirement(2.0 X 10 6 Gy)

  10. Diagnostic Strategy in APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dongyoung; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-05-15

    These features may bring out changes in operator tasks, changing the characteristics of tasks, or creating new tasks. Diagnostic strategy for identifying anomaly may be different especially in APR1400 from that in the analog control room due to the change of human-system interface, i.e. alarm system and display system. Since the first plant of APR1400 is being built at this moment, it is not known what strategies the operators will adopt in diagnosis tasks in the new operating environment. In this light, this paper aims at investigating operator's diagnostic strategies which are appropriate for APR1400. In order to collect data, several different approaches which are complementary are used to identify diagnostic strategies in the digital control room: analysis on audio/video recording of operation, observation in the simulator, and interview with the operators. The result shows that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of strategies, mostly, by getting more support from the computerized system. This paper investigated how the digitalized control room may influence operator's diagnostic strategies. Several different approaches, i. e., audio/video record, observation of training, and the interview with operators, were used to gather information about the operator's behaviors. As a conclusion, this paper figured out that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of the strategies, mostly, by getting more support from the computerized system. The operators interviewed also commented that the diagnosis in the APR1400 is quicker, more correct, and easier, compared with the analog control room.

  11. A study of the behaviour of irradiated or unirradiated grafts in the camera aquosa of irradiated and unirradiated animals; Etude du comportement d'un greffon irradie ou non, transplante dans la chambre anterieure de l'oeil d'un animal irradie ou non

    Energy Technology Data Exchange (ETDEWEB)

    Djalali-Behzad, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-06-01

    Following grafts of new born mice spinal ganglia in the 'camera aquosa' of adult mice, the authors tried hematopoietic tissue grafts in the same conditions. The growth of iso-logous and hetero-logous bone marrow in the 'camera aquosa' showed that this tissue, even after exposure to supralethal doses, was capable of survival and growth. A counter-experiment with non irradiated bone marrow grafts in the 'camera aquosa' of rats delivered 700 rads led to the conclusion that the environment, intoxicated by exposure, acted on the graft so that after vascularization it became unable to grow. (author) [French] Apres avoir greffe des ganglions rachidiens de souriceaux nouveaux-nes dans la chambre anterieure de l'oeil de souris adultes, l'auteur a tente de greffer du tissu hematopoietique de la meme facon. La proliferation de la moelle osseuse isologue et heterologue, dans la chambre anterieure de l'oeil, lui a permis de mettre en evidence une certaine capacite de survie et de proliferation de ce tissu irradie meme a dose supraletale. Par une contre-experimentation, c'est-a-dire par la greffe de moelle non irradiee dans la chambre anterieure de rats irradies a 700 rads, il conclut que le milieu ambiant, intoxique par l'irradiation, agit sur le greffon de telle sorte que ce dernier, apres s'etre vascularise, devient depourvu de son aptitude de proliferation. (auteur)

  12. Pseudomonas syringae evades host immunity by degrading flagellin monomers with alkaline protease AprA.

    Science.gov (United States)

    Pel, Michiel J C; van Dijken, Anja J H; Bardoel, Bart W; Seidl, Michael F; van der Ent, Sjoerd; van Strijp, Jos A G; Pieterse, Corné M J

    2014-07-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of bacterial species. In addition, we investigated the role of AprA in virulence of the bacterial plant pathogen P. syringae pv. tomato DC3000. The AprA-deficient DC3000 ΔaprA knockout mutant was significantly less virulent on both tomato and Arabidopsis thaliana. Moreover, infiltration of A. thaliana Col-0 leaves with DC3000 ΔaprA evoked a significantly higher level of expression of the defense-related genes FRK1 and PR-1 than did wild-type DC3000. In the flagellin receptor mutant fls2, pathogen virulence and defense-related gene activation did not differ between DC3000 and DC3000 ΔaprA. Together, these results suggest that AprA of DC3000 is important for evasion of recognition by the FLS2 receptor, allowing wild-type DC3000 to be more virulent on its host plant than AprA-deficient DC3000 ΔaprA. To provide further evidence for the role of DC3000 AprA in host immune evasion, we overexpressed the AprA inhibitory peptide AprI of DC3000 in A. thaliana to counteract the immune evasive capacity of DC3000 AprA. Ectopic expression of aprI in A. thaliana resulted in an enhanced level of resistance against wild-type DC3000, while the already elevated level of resistance against DC3000 ΔaprA remained unchanged. Together, these results indicate that evasion of host immunity by the alkaline protease AprA is important for full virulence of strain DC3000 and likely acts by preventing flagellin monomers from being recognized by its cognate immune receptor.

  13. Development of Reference Source Terms for EU-APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, ByungIl; Lee, Chonghui; Lee, Dongsu; Ko, Heejin; Kang, Sangho [KEPCO Engineering and Construction Co. Inc., Yongin (Korea, Republic of)

    2014-05-15

    These source terms are developed for the typical U. S. NPP and do not reflect the design characteristics of EU-APR1400 (1,400 MWe PWR) which will be applied for the EUR certification in European countries. The process of developing the RST for EU-APR1400 is to undergo a similar process that NUREG-1465 had gone through when it came out with its proposed source terms. The purpose of this study is to develop the EU-APR1400 design-specific RST complied with the EUR. The Large LOCA is the reference equence used in the NUREG-1465 evaluation, whereas the EUAPR1400 risk-significant sequences are dominated by small LOCA and non-LOCA sequences. Moreover, when considering the EU-APR1400 has many design features to mitigate the consequences of severe accident phenomena, it is not surprising that the aspects of both release fractions and durations are distinctly different from NUREG-1465. This RST will be continuously updated to reflect to the design features of EU-APR1400, and then, be used as the reference for design purposes such as criteria satisfaction of radioactivity releases, equipment survivability, control room habitability for severe accident, and so on.

  14. EU-APR Design in compliance with EUR Grid Requirement

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong-Hwan; Lee, Keun-Sung [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    European Utility Requirements (EUR) provides technical requirements for the generation III nuclear power plant in the European countries. EUR grid requirements present the plant requirements to satisfy the needs of the grid network. The grid requirements are the precondition for the operation of a generating plant on the network. This paper describes EU-APR design which has taken account of EUR grid requirements. In this paper, EU-APR designs according to the EUR grid requirements were described. EU-APR was designed in compliance with the voltage and frequency operation field and also designed to have the capability of load following such as primary control, secondary control, and daily load following. Consequently, the EU-APR design according to the EUR grid requirements is expected to get competitiveness and enhance the license feasibility in the European nuclear market.

  15. Construction of an apparatus for measuring the low-temperature thermal conductivity before and after neutron irradiation. Application to uranium dioxide (1963); Realisation d'un appareil pour la mesure de la conductibilite thermique a basse temperature avant et apres irradiation neutronique. Application au dioxyde d'uranium (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bethoux, O [Commisariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-09-15

    An apparatus has been studied and built which makes it possible to alternatively irradiate a sample at room temperature in the reactor 'Melusine' at the Grenoble Nuclear Research Centre, and to measure its thermal conductivity between 20 and 100 deg. K in perfect safety. The results obtained on UO{sub 2} have made it possible on the one hand to check experimentally that the spin-phonon diffusion leads to a thermal resistance independent of temperature above 30 deg. K, and on the other hand to propose a simple theory which takes into count the role played by the damage due to U-235 fission products in the decrease of thermal conductivity after irradiation. (author) [French] Un appareil permettant alternativement d'irradier un echantillon a temperature ambiante dans le reacteur ''Melusine'' du C.E.N.G., et de mesurer sa conductibilite thermique entre 20 et 100 deg. K en toute securite, a ete etudie et construit Les resultats obtenus sur UO{sub 2} ont permis, d'une part, de verifier experimentalement que la diffusion spin-phonon conduit a une resistance thermique independante de la temperature au-dessus de 30 deg. K, et, d'autre part, de proposer une theorie simple tenant compte du role joue par les degats dus aux produits de fission de l'uranium 235, dans la deterioration de la conductibilite thermique apres irradiation. (auteur)

  16. A Probability Analysis of the Generating Cost for APR1000+

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Gag-Hyeon; Kim, Dae-Hun [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, cutting CO{sub 2} emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the APR1000+ development is to ensure export competitiveness in the developing countries in the Middle East and Southeast Asia. To that end, APR1000+(1,000MWe, 3.5 generation) will be developed based on APR+ (1,500MWe, 3.5 generation). And comparing to OPR1000(Korean Standard Nuclear power Plant, 2.5 generation), APR1000+ have many design features such as the 60 year design life time, comprehensive site requirement of 0.3g seismic design, stability improvement, operability improvement and provisions for severe accidents. In this simulation, the results of generating cost for APR1000+ preliminary conceptual design using a probability method was shown to be 48.37 ~ 74.22 won/kWh(median value 56.51 won/kWh). Those of OPR1000 was 42.08 ~ 61.77 won/kWh(median value 48.63 won/kWh). APR1000+ has -16.2% cost advantage over OPR1000 nuclear power plant. The main reason of this results is due to adding several safety designs.

  17. The trauma registry compared to All Patient Refined Diagnosis Groups (APR-DRG).

    Science.gov (United States)

    Hackworth, Jodi; Askegard-Giesmann, Johanna; Rouse, Thomas; Benneyworth, Brian

    2017-05-01

    Literature has shown there are significant differences between administrative databases and clinical registry data. Our objective was to compare the identification of trauma patients using All Patient Refined Diagnosis Related Groups (APR-DRG) as compared to the Trauma Registry and estimate the effects of those discrepancies on utilization. Admitted pediatric patients from 1/2012-12/2013 were abstracted from the trauma registry. The patients were linked to corresponding administrative data using the Pediatric Health Information System database at a single children's hospital. APR-DRGs referencing trauma were used to identify trauma patients. We compared variables related to utilization and diagnosis to determine the level of agreement between the two datasets. There were 1942 trauma registry patients and 980 administrative records identified with trauma-specific APR-DRG during the study period. Forty-two percent (816/1942) of registry records had an associated trauma-specific APR-DRG; 69% of registry patients requiring ICU care had trauma APR-DRGs; 73% of registry patients with head injuries had trauma APR-DRGs. Only 21% of registry patients requiring surgical management had associated trauma APR-DRGs, and 12.5% of simple fractures had associated trauma APR-DRGs. APR-DRGs appeared to only capture a fraction of the entire trauma population and it tends to be the more severely ill patients. As a result, the administrative data was not able to accurately answer hospital or operating room utilization as well as specific information on diagnosis categories regarding trauma patients. APR-DRG administrative data should not be used as the only data source for evaluating the needs of a trauma program. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Radiation exposure reduction in APR1400

    International Nuclear Information System (INIS)

    Bae, C. J.; Hwang, H. R.; Matteson, D. M.

    2002-01-01

    The primary contributors to the total occupational radiation exposure in operating nuclear power plants are operation and maintenance activities during refueling outages. The Advanced Power Reactor 1400 (APR1400) includes a number of design improvements and plans to utilize advanced maintenance methods and robotics to minimize the annual collective dose. The major radiation exposure reduction features implemented in APR1400 are a permanent refueling pool seal, quick opening transfer tube blind flange, improved hydrogen peroxide injection at shutdown, improved permanent steam generator work platforms, and more effective temporary shielding. The estimated average annual occupational radiation exposure for APR1400 based on the reference plant experience and an engineering judgment is determined to be in the order of 0.4 man-Sv, which is well within the design goal of 1 man-Sv. The basis of this average annual occupational radiation exposure estimation is an eighteen (18) month fuel cycle with maintenance performed to steam generators and reactor coolant pumps during refueling outage. The outage duration is assumed to be 28 days. The outage work is to be performed on a 24 hour per day basis, seven (7) days a week with overlapping twelve (12) hour work shifts. The occupational radiation exposure for APR1400 is also determined by an alternate method which consists of estimating radiation exposures expected for the major activities during the refueling outage. The major outage activities that cause the majority of the total radiation exposure during refueling outage such as fuel handling, reactor coolant pump maintenance, steam generator inspection and maintenance, reactor vessel head area maintenance, decontamination, and ICI and instrumentation maintenance activities are evaluated at a task level. The calculated value using this method is in close agreement with the value of 0.4 man-Sv, that has been determined based on the experience and engineering judgement

  19. APR1400 Locked Rotor Transient Analysis using KNAP

    International Nuclear Information System (INIS)

    Lee, Dong-Hyuk; Kim, Yo-Han; Ha, Sang Jun

    2007-01-01

    KEPRI (Korea Electric Power Research Institute) has developed safety analysis methodology for non-LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code for most transients. For locked rotor transient DNBR analysis, UNICORN-TM code is used. UNICORN-TM is the unified code of RETRAN, MASTER and TORC. The UNICORN-TM has 1-D and 3-D neutron kinetics calculation capability. For locked rotor DNBR analysis, 1-D neutron kinetics is used. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400) locked rotor analysis and compare the results with those in the APR1400 SSAR(Standard Safety Analysis Report). The locked rotor transient is one of the 'decrease in reactor coolant system flow rate' events and the results are typically described in the chapter 15.3.3 of SAR (Safety Analysis Report). In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, locked rotor transient is analyzed using UNICORN-TM code and the results are compared with those from APR1400 SSAR

  20. APR1400 Locked Rotor Transient Analysis using KNAP

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong-Hyuk; Kim, Yo-Han; Ha, Sang Jun [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2007-07-01

    KEPRI (Korea Electric Power Research Institute) has developed safety analysis methodology for non-LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code for most transients. For locked rotor transient DNBR analysis, UNICORN-TM code is used. UNICORN-TM is the unified code of RETRAN, MASTER and TORC. The UNICORN-TM has 1-D and 3-D neutron kinetics calculation capability. For locked rotor DNBR analysis, 1-D neutron kinetics is used. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400) locked rotor analysis and compare the results with those in the APR1400 SSAR(Standard Safety Analysis Report). The locked rotor transient is one of the 'decrease in reactor coolant system flow rate' events and the results are typically described in the chapter 15.3.3 of SAR (Safety Analysis Report). In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, locked rotor transient is analyzed using UNICORN-TM code and the results are compared with those from APR1400 SSAR.

  1. Design characteristics of EU-APR1400 on-site power system

    International Nuclear Information System (INIS)

    Kim, D.H.; Kim, Y.S.; Kim, Y.S.

    2014-01-01

    In the global nuclear market, US and European design requirements have been largely used to develop the design of nuclear power plants(NPPs). The APR1400 design was developed on the basis of US regulatory guide and EPRI utility requirements document(URD). In order to enlarge the export market of APR1400, KHNP (Korea Hydro & Nuclear Power Co., Ltd) has developed the EU-APR1400 design which complies with the European nuclear design requirements. In this paper, the design characteristics of EU-APR1400 on-site power system developed according to the European design requirements of electrical power system are described. The European main design requirements of electrical power system involve 50 Hz rated frequency, 400/110 kV grid voltage, the application of the diversity and the redundancy, and so on. The EU-APR1400 on-site power system has been developed on the basis of these requirements. The representative designs include the redundancy, diversity, independence design, the emergency power supply design, the design for providing electrical power to the dedicated severe accident systems, and the design for European grid requirements. (author)

  2. A study of the behaviour of irradiated or unirradiated grafts in the camera aquosa of irradiated and unirradiated animals; Etude du comportement d'un greffon irradie ou non, transplante dans la chambre anterieure de l'oeil d'un animal irradie ou non

    Energy Technology Data Exchange (ETDEWEB)

    Djalali-Behzad, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-06-01

    Following grafts of new born mice spinal ganglia in the 'camera aquosa' of adult mice, the authors tried hematopoietic tissue grafts in the same conditions. The growth of iso-logous and hetero-logous bone marrow in the 'camera aquosa' showed that this tissue, even after exposure to supralethal doses, was capable of survival and growth. A counter-experiment with non irradiated bone marrow grafts in the 'camera aquosa' of rats delivered 700 rads led to the conclusion that the environment, intoxicated by exposure, acted on the graft so that after vascularization it became unable to grow. (author) [French] Apres avoir greffe des ganglions rachidiens de souriceaux nouveaux-nes dans la chambre anterieure de l'oeil de souris adultes, l'auteur a tente de greffer du tissu hematopoietique de la meme facon. La proliferation de la moelle osseuse isologue et heterologue, dans la chambre anterieure de l'oeil, lui a permis de mettre en evidence une certaine capacite de survie et de proliferation de ce tissu irradie meme a dose supraletale. Par une contre-experimentation, c'est-a-dire par la greffe de moelle non irradiee dans la chambre anterieure de rats irradies a 700 rads, il conclut que le milieu ambiant, intoxique par l'irradiation, agit sur le greffon de telle sorte que ce dernier, apres s'etre vascularise, devient depourvu de son aptitude de proliferation. (auteur)

  3. Microwave-Irradiation-Assisted HVAC Filtration for Inactivation of Viral Aerosols (Postprint)

    Science.gov (United States)

    2012-02-01

    Baggiani, A. and Senesi, S. (2004). Effect of Microwave Radiation on Bacillus subtilis Spores . J. Appl. Microbiol. 97: 1220–1227. Damit, B., Lee, C.N...AFRL-RX-TY-TP-2012-0020 MICROWAVE-IRRADIATION-ASSISTED HVAC FILTRATION FOR INACTIVATION OF VIRAL AEROSOLS POSTPRINT Myung-Heui Woo and...12-APR-2011 -- 11-DEC-2011 Microwave Irradiation-Assisted HVAC Filtration for Inactivation of Viral Aerosols (POSTPRINT) FA8650-06-C-5913 0602102F

  4. Pseudomonas syringae evades host Immunity by degrading flagellin monomers with alkaline protease AprA

    OpenAIRE

    Pel, M.J.C.; Van Dijken, A.J.H.; Bardoel, B.W.; Seidl, M.F; Van der Ent, S.; Van Strijp, J.A.G.

    2014-01-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of bacterial species. In addition, we investigated the role of AprA in virulence of the bacterial plant athogen P. syringae pv. tomato DC3000. The AprA-deficient DC3000 ΔaprA knockout mutant was significantl...

  5. Estimation of the Body Content Following Inhalation of Insoluble Plutonium; Evaluation de la Charge Corporelle de Plutonium, a la Suite de l'Inhalation de Plutonium Insoluble; 041e 041f 0420 0415 0414 ; Carga Corporal Consecutiva a la Inhalacion de Plutonio Insoluble

    Energy Technology Data Exchange (ETDEWEB)

    Dolphin, G. W. [Authority Health and Safety Branch, Radiological Protection Division, United Kingdom Atomic Energy Authority, Harwell, Berks. (United Kingdom)

    1964-11-15

    The problem of estimating the body content of plutonium following the inhalation of plutonium oxide is of considerable practical importance and, on the grounds of the known insolubility of plutonium oxide, measurements of plutonium in urine might be considered valueless. This paper reviews the relevant published biological data from beagle dog experiments and also reviews data from two human cases. From this review it is concluded that there is evidence for believing that the body content, following an accidental inhalation, can be estimated from the measurements of plutonium excreted in urine at times greater than about 300 d after the intake. Some possible excretion methods are discussed. Finally, there is a comment on the radiological protection aspects of insoluble plutonium in the lungs and bronchial lymph nodes and it is stressed that the particular nature of the plutonium must be taken into consideration. (author) [French] Le probleme de l'evaluation de la charge corporelle de plutonium a la suite de l'inhalation d'oxyde de plutonium presente une grande importance sur l'e plan pratique et, en raison de l'insolubilite bien connue de l'oxyde de plutonium on peut etre tente de considerer comme sans valeur les dosages du plutonium contenu dans l'urine. L'auteur passe en revue les donnees biologiques pertinentes deja publiees a la suite d'experiences faites sur les chiens bigles, ainsi que des donnees relatives a deux cas d'inhalation par des hommes. D'apres cette etude, il y a lieu de croire qu'on peut evaluer la charge corporelle de plutonium, a la suite d'une inhalation accidentelle, en faisant des dosages du plutonium contenu dans l'urine plus de 300 jours apres l'absorption. Il discute plusieurs methodes possibles. Il examine, enfin, sous l'angle de la protection radiologique, la presence du plutonium insoluble dans les poumons et les ganglions lymphatiques des bronches et il insiste sur le fait qu'il faut tenir compte de la nature particuliere du plutonium

  6. APR1400 CEA Withdrawal at Power Accident Analysis using KNAP

    International Nuclear Information System (INIS)

    Lee, Dong-Hyuk; Yang, Chang-Keun; Kim, Yo-Han; Sung, Chang-Kyung

    2006-01-01

    KEPRI (Korea Electric Power Research Institute) has been developing safety analysis methodology for non- LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code. RETRAN code is a non- LOCA safety analysis code developed by EPRI. The new methodology will replace existing CE (Combustion Engineering) supplied codes and methodologies currently used in non-LOCA analysis of OPR1000. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400). The CEA (Control Element Assembly) withdrawal at power accident is one of the 'reactivity and power distribution anomalies' events and the results are typically described in the chapter 15.4.2 of SAR (Safety Analysis Report). The APR1400 has been designed to generate 1,400MWe of electricity with advanced features for greatly enhanced safety and economic goals. The CEA withdrawal at power analysis in APR1400 SSAR (Standard Safety Analysis Report) is analyzed with CESEC-III computer code. In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, CEA withdrawal at power accident is analyzed using RETRAN code and it is compared with results from APR1400 SSAR

  7. System Response Analysis of LOCV for APR1400 Using KNAP

    International Nuclear Information System (INIS)

    Kim, Yo-Han; Sung, Chang-Kyung; Jun, Hwang-Yong

    2006-01-01

    Korea Electric Power Research Institute (KEPRI) of Korea Electric Power Corporation (KEPCO) has been developed the non-loss-of-coolant accident (non-LOCA) analysis methodology, called as the Korea Non-LOCA Analysis Package (KNAP), for the typical Optimized Power Reactor 1000 (OPR1000) plants. Considering current licensing methodology conducted by ABB-CE, however, the KNAP could be applied to Advanced Power Reactor 1400 (APR1400). In spite of some difference in components of two plant types, there is a close resemblance between their nuclear steam supply systems (NSSS). So, in this study, the loss of condenser vacuum (LOCV) event were analyzed using KNAP for APR1400 to estimate the feasibility of the application and the results were compared with those given in APR1400 Standard Safety Analysis Report (SSAR), which were calculated using the CESEC-III code of ABB-CE. Through the study, it was concluded that the KNAP could be applicable to APR1400 on the view point of LOCV event

  8. Interactions between impurities and defects created by irradiation in iron; Interactions entre les impuretes et les defauts crees par irradiation dans le fer

    Energy Technology Data Exchange (ETDEWEB)

    Vigier, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    'expose et aux discussions de nouveaux resultats experimentaux. Grace a l'addition d'impurete dans le fer, des experiences de trainage magnetique, energie stockee, resistivite et dilatometrie ont permis d'etablir que le stade I se rattache au modele propose par Granato et Nilan (90): seul le dernier sous-stade I{sub E} provient de la disparition des interstitiels dans les lacunes apres leur libre migration dans le reseau. Divers modeles sont discutes pour le stade II; s'il est probable que les diinterstitiels sont observables apres une irradiation aux electrons, aucune bande de trainage ne semble leur correspondre apres une irradiation aux neutrons. Des phenomenes particuliers apparaissent dans le fer irradie lorsqu'il contient des impuretes telles que nickel ou silicium (apparition de nouvelles bandes de trainage, leur transformation les unes dans les autres); ils refletent la complication successive du defaut elementaire interstitiel de fer-atome d'impurete. Enfin, dans une derniere section, l'auteur decrit quelques experiences effectuees sur des alliages fer-carbone irradies ou non ; elles montrent que le carbone apres avoir precipite a une temperature inferieure a 300 deg. C, se remet en solution lorsque l'alliage est chauffe au-dela de 330 deg. C. (auteur)

  9. Functional Requirement Analysis and Function Allocation for APR 1400

    International Nuclear Information System (INIS)

    Nuraslinda, Anuar; Florah, Kamanja; Noloyiso, Mtoko and others

    2013-01-01

    This paper intends to fulfill the FRA and FA of the HFE as required in Chapter 4 of NUREG-0711 rev. 3 for APR1400 to satisfy both plant safety and power generation objectives. This paper aims to evaluate the FRA and FA for APR1400. The allocation of function is done at the system level for all processes for both the power generation and safety goals, following the NUREG/CR-3331 guideline. As a conclusion, this paper has successfully implemented the requirements and methodology specified in NUREG-0711 for APR 1400. The Functional Requirement Analysis (FRA) and Function Allocation (FA) are required by the regulation in the Human Factors Engineering (HFE) program. The FRA defines the functions, processes, and system for plant safety and power generation. The FA allocates the functions to human operator, automation, or a combination of two. The FRA and FA for APR1400 have been performed in the very early stage of development but only for the plant safety. However, the analysis did not include the goal of power generation and also did not fully satisfy the latest revision of NUREG-0711

  10. Functional similarities between the dictyostelium protein AprA and the human protein dipeptidyl-peptidase IV.

    Science.gov (United States)

    Herlihy, Sarah E; Tang, Yu; Phillips, Jonathan E; Gomer, Richard H

    2017-03-01

    Autocrine proliferation repressor protein A (AprA) is a protein secreted by Dictyostelium discoideum cells. Although there is very little sequence similarity between AprA and any human protein, AprA has a predicted structural similarity to the human protein dipeptidyl peptidase IV (DPPIV). AprA is a chemorepellent for Dictyostelium cells, and DPPIV is a chemorepellent for neutrophils. This led us to investigate if AprA and DPPIV have additional functional similarities. We find that like AprA, DPPIV is a chemorepellent for, and inhibits the proliferation of, D. discoideum cells, and that AprA binds some DPPIV binding partners such as fibronectin. Conversely, rAprA has DPPIV-like protease activity. These results indicate a functional similarity between two eukaryotic chemorepellent proteins with very little sequence similarity, and emphasize the usefulness of using a predicted protein structure to search a protein structure database, in addition to searching for proteins with similar sequences. © 2016 The Protein Society.

  11. Functional similarities between the dictyostelium protein AprA and the human protein dipeptidyl‐peptidase IV

    Science.gov (United States)

    Herlihy, Sarah E.; Tang, Yu; Phillips, Jonathan E.

    2017-01-01

    Abstract Autocrine proliferation repressor protein A (AprA) is a protein secreted by Dictyostelium discoideum cells. Although there is very little sequence similarity between AprA and any human protein, AprA has a predicted structural similarity to the human protein dipeptidyl peptidase IV (DPPIV). AprA is a chemorepellent for Dictyostelium cells, and DPPIV is a chemorepellent for neutrophils. This led us to investigate if AprA and DPPIV have additional functional similarities. We find that like AprA, DPPIV is a chemorepellent for, and inhibits the proliferation of, D. discoideum cells, and that AprA binds some DPPIV binding partners such as fibronectin. Conversely, rAprA has DPPIV‐like protease activity. These results indicate a functional similarity between two eukaryotic chemorepellent proteins with very little sequence similarity, and emphasize the usefulness of using a predicted protein structure to search a protein structure database, in addition to searching for proteins with similar sequences. PMID:28028841

  12. A Probability Analysis of the Generating Cost for EU-APR1400 Single Unit

    International Nuclear Information System (INIS)

    Ha, Gak Hyeon; Kim, Sung Hwan

    2014-01-01

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, reducing CO 2 emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the EU-APR100 development is to ensure export competitiveness in the European countries. To this end, EU-APR1400 have been developed based one te APR1400 (Advanced Power Reactor, GEN Type) The EU-APR1400 adds many advanced design features to its predecessor, as outlined below in Table 1. In this simulation, the results of the generating cost of the EU-APR1400 single unit were determined using the probability cost analysis technique, the generating cost range was shown to be 56.16 ∼ 70.92 won/kWh.

  13. A Probability Analysis of the Generating Cost for EU-APR1400 Single Unit

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Gak Hyeon; Kim, Sung Hwan [KHNP CRI, Seoul (Korea, Republic of)

    2014-10-15

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, reducing CO{sub 2} emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the EU-APR100 development is to ensure export competitiveness in the European countries. To this end, EU-APR1400 have been developed based one te APR1400 (Advanced Power Reactor, GEN Type) The EU-APR1400 adds many advanced design features to its predecessor, as outlined below in Table 1. In this simulation, the results of the generating cost of the EU-APR1400 single unit were determined using the probability cost analysis technique, the generating cost range was shown to be 56.16 ∼ 70.92 won/kWh.

  14. APR1400 Fluidic Device Sensitivity Test

    International Nuclear Information System (INIS)

    Choi, Nam Hyun; Chu, In Cheol; Min, Kyong Ho; Song, Chul Hwa

    2005-12-01

    In the safety injection tank at the emergency core cooling system of APR1400, a new safety design feature, passive fluidic device is equipped which includes no active driving system. It is essential to evaluate the new design feature with various experiments. For this reason, three categories of sensitivity tests have been performed in the present study. As the first sensitivity experiment, the effect of the height of the stand pipe was investigated. The second sensitivity test was conducted with removing the insert plate gasket to examine its effect. The effect of the expansion of the control nozzle width was ascertained from the third sensitivity test. The results of each test showed that the passive fluidic device which will be equipped in the SIT tank of APR1400 has great integrity and repeatability

  15. Evaluation of the Planned Outage Durations in EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Byung Joon; Lee, Keun Sung [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    EU-APR has been designed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. And it is modified and improved from its original design of APR1400. The whole duration varies depending on items for additional process. Refueling and regular maintenance outage is comprised of basic processes and Main turbine-generator outage includes dismantling inspection of main generator and high pressure turbine as a critical path in addition to basic processes. In-Service Inspection Outage includes Automatic ultrasonic inspection on the upper side/lower side of a nuclear reactor as a critical path in addition to basic processes. The planned outage durations of EU-APR are optimized according to the above results. And they are complied with EUR Requirement (EUR 2.2.7.2.2 B), respectively. In addition, outage duration can be reduced with improved operating technology and more maintenance friendly environment including betterment of filling, drain and ventilation.

  16. Evaluation of the Planned Outage Durations in EU-APR

    International Nuclear Information System (INIS)

    Jung, Byung Joon; Lee, Keun Sung

    2016-01-01

    EU-APR has been designed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. And it is modified and improved from its original design of APR1400. The whole duration varies depending on items for additional process. Refueling and regular maintenance outage is comprised of basic processes and Main turbine-generator outage includes dismantling inspection of main generator and high pressure turbine as a critical path in addition to basic processes. In-Service Inspection Outage includes Automatic ultrasonic inspection on the upper side/lower side of a nuclear reactor as a critical path in addition to basic processes. The planned outage durations of EU-APR are optimized according to the above results. And they are complied with EUR Requirement (EUR 2.2.7.2.2 B), respectively. In addition, outage duration can be reduced with improved operating technology and more maintenance friendly environment including betterment of filling, drain and ventilation

  17. Current status of integrated HFE V and V system of APR1400

    International Nuclear Information System (INIS)

    Lee, M. S.; Hong, J. H.; Lee, S. H.; Lee, Y. K.

    2006-01-01

    The first Advanced Light Water Reactor called Advanced Power Reactor (APR1400) has many specific features such as passive safety features, digital I and C, and digitalized main control room design. This digital-based neo-concept main control room design needs comprehensive verification and validation process to get the license for construction. An integrated system for APR1400 MMIS design validation is under development by KEPRI with the participating of KHNP. The facility which is based on the NUREG/CR-6393 and ANS3.5 can simulate all of the dynamic functions and responses of APR1400, and measure the human factors by using conventional subject methods and measuring the operator's biological signals. This system will be used in human factors V and V process of the PRM (NUREG0711) of APR1400 MMIS design. (authors)

  18. Study on Maintenance Personnel Development Plan For The Exported APR1400 Commissioning

    International Nuclear Information System (INIS)

    Cho, Sungbae; Kim, Jongdae; Jun, Hokwang; Hwang, Inok; Kang, Jaeyuel

    2012-01-01

    This paper indicates ways to develop maintenance personnel for the exported APR1400 commissioning. The exported APR1400 has not been experienced ay maintenance yet, and requirements for maintenance personnel have not been clarified yet. Based on sound maintenance experience, KEPCO Plant Service and Engineering Company (KEPCO KPS) has studied on maintenance training and career requirement to establish a development plan of the maintenance personnel for the exported nuclear power plant. By defining manpower and training requirement, and mobilization plan, we expect to secure reliability of the exported APR1400

  19. Radioprotective properties of some heterocyclic nitrogenous compounds against spectral modifications in hemoglobin of x-irradiated mice; Proprietes radioprotectrices de certains composes heterocycliques azotes sur les modifications spectrales de l'hemoglobine de souris irradiee

    Energy Technology Data Exchange (ETDEWEB)

    Roushdy, H; Pierotti, T; Polverelli, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Imidazole and benzimidazole are known for their radioprotective action. In this work, authors have studied the radioprotective action of these compounds on visible and ultra-violet hemoglobin absorption spectra obtained from mice after in vivo X-irradiation. Results compared to those obtained with cysteamine show: 1- a possible pharmacological action of the heterocyclic nitrogenous compounds on the {alpha} and {beta} bands (540 and 580 m{mu}). 2 - a significative variation of the ratio of the optical densities (580/540) after irradiation with hemoglobin of non and radio-protected mice. However, following a real drop of absorption maxima, the twenty-fifth day after irradiation, normal optical densities of each band are found again. A physico-chemical study would be necessary to understand the hemoglobin transformation after irradiation and perhaps, its possible radioprotection. (authors) [French] Les proprietes radioprotectrices de l'imidazole et du benzimidazole etant deja connues, les auteurs ont etudie l'action de ces produits sur les spectres d'absorption de l'hemoglobine dans le visible et le proche ultra-violet apres une irradiation in vivo de souris a dose letale. L'action de ces produits comparee a celle de la cysteamine utilisee dans les memes conditions a permis de constater: 1- l'action pharmacologique probable des heterocycles azotes sur les bandes {alpha} et {beta} situees a 540 et 580 m{mu}; 2 - qu'avec et sans radioprotecteurs, les modifications spectrales se traduisaient par des variations du rapport d'intensite d'absorption existant entre les bandes a 540 et 580 m{mu}. Toutefois, apres une chute des maxima d'absorption, ceux-ci retournent aux valeurs normales le vingt-cinquieme jour apres irradiation. Une etude physicochimique complementaire de l'hemoglobine permettrait de definir la nature exacte du changement apres irradiation et peut-etre son eventuelle radioprotection. (auteurs)

  20. 48 CFR 1552.235-76 - Treatment of Confidential Business Information (APR 1996).

    Science.gov (United States)

    2010-10-01

    ... Business Information (APR 1996). 1552.235-76 Section 1552.235-76 Federal Acquisition Regulations System... Provisions and Clauses 1552.235-76 Treatment of Confidential Business Information (APR 1996). As prescribed in 1535.007-70(c), insert the following clause: Treatment of Confidential Business Information (TSCA...

  1. Implementasi Automatic Packet Reporting System (APRS) Untuk Paket Data Pemantauan dan PengukuranUntuk Paket Data Pemantauan dan Pengukuran

    OpenAIRE

    Arief Goeritno

    2016-01-01

    Telah dilakukan implementasi Automatic Packet Reporting System (APRS) untuk paket data pemantauan dan pengukuran melalui tujuan penelitian, berupa: a) penyetelan program aplikasi pada jaringan APRS dan b) pengukuran terhadap penerimaan data berdasarkan kinerja sensor-sensor. Penyetelan program aplikasi APRS merupakan konfigurasi perangkat lunak untuk APRS yang akan digunakan pada stasiun penerimaan data APRS dengan program aplikasi yang biasa digunakan, yaitu hyperterminal dan UI-View 32. Pen...

  2. Thermal restoration of the lattice parameter of weakly irradiated UO{sub 2} (1962); Restauration thermique de parametre du l'UO{sub 2} faiblement irradie (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Bloch, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Weak irradiations of uranium dioxide lead to an expansion of the cristal lattice. We have studied the restoration of the lattice parameter after successive isochronous annealings. The process occurs in two main stages, one starting at 200 deg. C and the other at 500 deg. C. (author) [French] De faibles irradiations du bioxyde d'uranium produisent une dilatation de la maille cristalline. Nous avons etudie la restauration du parametre apres des recuits isochrones successifs. Elle se fait en deux stades principaux: l'un a partir de 200 deg. C, l'autre a partir de 500 deg. C. (auteur)

  3. 48 CFR 1552.235-75 - Access to Toxic Substances Control Act Confidential Business Information (APR 1996).

    Science.gov (United States)

    2010-10-01

    ... Control Act Confidential Business Information (APR 1996). 1552.235-75 Section 1552.235-75 Federal... Confidential Business Information (APR 1996). As prescribed in 1535.007(b), insert the following provision: Access to Toxic Substances Control Act Confidential Business Information (APR 1996) In order to perform...

  4. Neutronic and thermal hydraulic analyses of LEU targets irradiated in a research reactor for Molybdenum-99 production

    International Nuclear Information System (INIS)

    Jo, Daeseong; Lee, Kyung-Hoon; Kim, Hong-Chul; Chae, Heetaek

    2014-01-01

    Highlights: • Neutronic and thermal hydraulic analyses of irradiated fuel plates for Molybdenum-99. • Heat production during and after irradiation was evaluated using MCNP and ORIGEN-APR. • Cooling capacities under various cooling conditions were evaluated using TMAP. • Natural convective cooling was adequate for the decay power after 0.03 h from withdrawal. • Maximum temperature of the target decayed for 24 h does not exceed the blistering threshold. - Abstract: Neutronic and thermal hydraulic analyses of irradiated fuel plates for Molybdenum-99 production in a research reactor were performed to investigate (1) the heat production during irradiation, (2) decay heat after irradiation, and (3) cooling capacities under various cooling conditions. The heat production on the target plates irradiated in the core was evaluated using the MCNP code. The decay heat after irradiation was evaluated using the ORIGEN-APR code, and compared against ANSI/ANS-5.1-1979. The cooling capacities of forced convective cooling during irradiation and natural convective cooling after irradiation were estimated using the TMAP code. An equilibrium core with different core statuses i.e., BOC, MOC, and EOC was used to evaluate power released from the targets and the axial power distribution. Based on the neutronic calculations, thermal margins i.e., the maximum wall temperature, minimum ONB temperature margin, and minimum CHF ratio were estimated, and the cooling strategy of the fission Mo targets was discussed. The targets were cooled by forced convective cooling during irradiation, and cooled by natural convective cooling after irradiation. For a further production process, the targets transported to a hot cell were exposed to the air, and cooled by natural convection cooling in air. As a result, the maximum wall temperature remained below the ONB temperature while the targets were under water, and the maximum wall temperature remained under the blistering limit while the targets

  5. Insecticidal activity of the metalloprotease AprA occurs through suppression of host cellular and humoral immunity.

    Science.gov (United States)

    Lee, Seung Ah; Jang, Seong Han; Kim, Byung Hyun; Shibata, Toshio; Yoo, Jinwook; Jung, Yunjin; Kawabata, Shun-Ichiro; Lee, Bok Luel

    2018-04-01

    The biochemical characterization of virulence factors from entomopathogenic bacteria is important to understand entomopathogen-insect molecular interactions. Pseudomonas entomophila is a typical entomopathogenic bacterium that harbors virulence factors against several insects. However, the molecular actions of these factors against host innate immune responses are not clearly elucidated. In this study, we observed that bean bugs (Riptortus pedestris) that were injected with P. entomophila were highly susceptible to this bacterium. To determine how P. entomophila counteracts the host innate immunity to survive within the insect, we purified a highly enriched protein with potential host insect-killing activity from the culture supernatant of P. entomophila. Then, a 45-kDa protein was purified to homogeneity and identified as AprA which is an alkaline zinc metalloprotease of the genus Pseudomonas by liquid chromatography mass spectrometry (LC-MS). Purified AprA showed a pronounced killing effect against host insects and suppressed both host cellular and humoral innate immunity. Furthermore, to show that AprA is an important insecticidal protein of P. entomophila, we used an aprA-deficient P. entomophila mutant strain (ΔaprA). When ΔaprA mutant cells were injected to host insects, this mutant exhibited extremely attenuated virulence. In addition, the cytotoxicity against host hemocytes and the antimicrobial peptide-degrading ability of the ΔaprA mutant were greatly decreased. These findings suggest that AprA functions as an important insecticidal protein of P. entomophila via suppression of host cellular and humoral innate immune responses. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Radiological Impacts Assessment during Normal Decommissioning Operation for EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Do Hyun; Lee, Keun Sung [KHNP CRI, Daejeon (Korea, Republic of); Lee, ChongHui [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2016-10-15

    In this paper, radiological impacts on human beings during normal execution of the decommissioning operations from the current standard design of EU-APR which has been modified and improved from its original design of APR1400 to comply with EUR, are evaluated. Decommissioning is the final phase in the life cycle of a nuclear installation, covering all activities from shutdown and removal of fissile material to environmental restoration of the site. According to article 5.4 specified in chapter 2.20 of European Utility Requirements (EUR), all relevant radiological impacts on human being should be considered during the environmental assessment of decommissioning, including external exposure from direct radiation of plant and other radiation sources, and internal exposure due to inhalation and ingestion. In this paper, radiological impacts on human beings during normal circumstances of the decommissioning operation were evaluated from the current standard design of EU-APR based on the simple transport model and practical generic methodology for assessing the radiological impact provided by IAEA. The results of dose assessment fulfilled the dose limit for all scenarios.

  7. GOTHIC Simulation of APR1400 Auxiliary Charging Pump room heat up

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Hui-Un; Heo, Sun [KHNP, Daejeon (Korea, Republic of)

    2014-10-15

    As a part of the Advanced Power Reactor 1400 (APR1400) U. S. Nuclear Regulatory Commission Design Certification (NRC DC) project, we have been investigating Auxiliary Charging Pump (ACP) room heat up. With reference to the design specification of the ACP room, we determined input information and developed a GOTHIC model of the APR1400 ACP room. This calculation model is described herein, and representative results from the calculation are presented as well. The results of the present paper are used to determine the integrity of ACP operating in the accident. APR 1400 GOTHIC model was developed for ACP room heat up calculation. Calculation results confirm that door opening is cooling the room properly. It is found that the difference due to the surface option of heat conductors is insignificant. Based on this result, further studies should be performed to confirm integrity of ACP.

  8. Conceptual Designs for the Performance Improvement of APR1400 SIT and Preliminary Performance Evaluation

    International Nuclear Information System (INIS)

    Chu, In-Cheol; Kwon, Tae-Soon; Song, Chul-Hwa

    2008-01-01

    Some evolutionary type PWRs such as APR1400 and APWR adopt advanced safety injection tank (SIT). The SIT of APR1400 has a fluidic device (FD) which passively controls ECC water injection flow rate into reactor coolant system during refill and reflood phases of LB-LOCA (i.e., a high injection flow rate during the refill phase and a low injection flow rate during the reflood phase). The benefit of the FD is the elimination of the function of low pressure safety injection pump from the safety injection system. The flow controlling performance of the APR1400 FD was evaluated using a prototypical full-scale test facility, called VAPER (Valve Performance Evaluation Rig). Even though the performance of the APR1400 FD satisfied major design and licensing requirements, further improvement of the performance is expected such as the extension of total injection period, the delay of nitrogen gas discharge. Several conceptual designs have been being drawn out in order to improve the performance of the APR1400 SIT. The performance of some designs was evaluated using a small scale SIT test rig. The present paper introduces some of the conceptual designs and shows the performance evaluation experimental results

  9. Development of LBB Piping Evaluation Diagram for APR 1000 Main Steam Line Piping

    International Nuclear Information System (INIS)

    Yang, J. S.; Jeong, I. L.; Park, C. Y.; Bai, S. Y.

    2010-01-01

    This paper presents the piping evaluation diagram (PED) to assess the applicability of Leak-Before- Break(LBB) for APR 1000 main steam line piping. LBB-PED of APR 1000 main steam line piping is independent of its piping geometry and has a function of the loads applied in piping system. Also, in order to evaluate LBB applicability during construction process with only the comparative evaluation of material properties between actually used and expected, the expected changes of material properties are considered in the LBB-PED. The LBB-PED, therefore, can be used for quick LBB evaluation of APR 1000 main steam line piping of both design and construction

  10. Review of APR+ Level 2 PSA

    International Nuclear Information System (INIS)

    Lehner, J.R.; Mubayi, V.; Pratt, W.T.

    2012-01-01

    Brookhaven National Laboratory (BNL) assisted the Korea Institute of Nuclear Safety (KINS) in reviewing the Level 2 Probabilistic Safety Assessment (PSA) of the APR+ Advanced Pressurized Water Reactor (PWR) prepared by the Korea Hydro and Nuclear Power Co., Ltd (KHNP) and KEPCO Engineering and Construction Co., Inc. (KEPCO-E and C). The work described in this report involves a review of the APR+ Level 2 PSA submittal (Ref. 1). The PSA and, therefore, the review is limited to consideration of accidents initiated by internal events. As part of the review process, the review team also developed three sets of Requests for Additional Information (RAIs). These RAIs were provided to KHNP and KEPCO-E and C for their evaluation and response. This final detailed report documents the review findings for each technical element of the PSA and includes consideration of all of the RAIs made by the reviewers as well as the associated responses. This final report was preceded by an interim report (Ref. 2) that focused on identifying important issues regarding the PSA. In addition, a final meeting on the project was held at BNL on November 21-22, 2011, where BNL and KINS reviewers discussed their preliminary review findings with KHNP and KEPCO-E and C staffs. Additional information obtained during this final meeting was also used to inform the review findings of this final report. The review focused not only on the robustness of the APR+ design to withstand severe accidents, but also on the capability and acceptability of the Level 2 PSA in terms of level of detail and completeness. The Korean nuclear regulatory authorities will decide whether the PSA is acceptable and the BNL review team is providing its comments for KINS consideration. Section 2.0 provides the basis for the BNL review. Section 3.0 presents the review of each technical element of the PSA. Conclusions and a summary are presented in Section 4.0. Section 5.0 contains the references.

  11. Development of Nanosatellite Technology with APRS Module for Disaster Mitigation

    Science.gov (United States)

    Prahyang, S. Y.; Dhiya’Ulhaq, M. Z.; Golim, O. P.; Gunawan, R.; Suhandinata; Jahja, E.; Nelwan, E. R. G.; Ananta, C.; Chow, I. M.; Mali, N. D. F.

    2018-05-01

    Development of nanosatellite technology has enabled satellites to be developed with multiple capabilities for a specific mission in a short time with a low cost. Satellite communications are proved to be more effective in delivering information due to its large coverage area. Surya Satellite-1 will become the first Indonesian nanosatellite developed by undergraduate students. It is designed with low-cost commercial payloads, including an APRS module for communication and operated on VHF and UHF amateur radio frequencies. The mission of the satellites focused on disaster mitigation through APRS communication network with remote stations located on disaster-prone areas.

  12. Presence of interleukin 6 at the cutaneous level after in vivo neutron irradiation; Presence d`interleukine 6 au niveau cutane apres irradiation neutronique in vivo

    Energy Technology Data Exchange (ETDEWEB)

    Agay, D.; Pradeau, P.; Edgard, L.; Van Uye, A.; Mestries, J.C.

    1994-12-31

    In this study we investigated the in situ localization of IL-6 in mixed neutron-gamma irradiated baboons belly skin. Using immunohistochemical methods, we demonstrated the presence of IL-6 as early as the first day after the irradiation day. However experimental conditions did not allow us to conclude to a causality relation between irradiation and IL-6 cutaneous presence. (author). 4 refs.

  13. Probability Analysis of the Construction Cost of an APR1000 Single Unit

    International Nuclear Information System (INIS)

    Ha, Gak Hyeon; Suh, Yong Pyo; Kang, Yong Chul

    2011-01-01

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, cutting CO 2 emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the APR1000 development is to ensure export competitiveness in the developing countries in the Middle East and Southeast Asia. To that end, APR1000 (1,000MWe, 3 rd generation) will be developed based on the OPR1000 (Korean standard nuclear power plant, 2.5 generation) by incorporating and improving the general requirements such as the 60 year design life time, comprehensive site requirement of 0.3g seismic design, stability improvement, operability improvement and provisions for severe accidents. The APR1000 adds 16 advanced design features to its predecessor, as outlined below in Table 1

  14. Evaluation of the Main Steam Line Break Accident for the APR+ Standard Design using MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Park, M. H.; Kim, Y. S.; Hwang, Min Jeong; Sim, S. K. [Environment Energy Technology, Daejeon (Korea, Republic of); Bang, Young Seok [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2015-05-15

    As a part of licensing evaluation of the APR+ (Advanced Power Reactor +) standard design, Korea Institute of Nuclear Safety(KINS) performed safety evaluation of the APR+ Standard Safety Analysis Report(SSAR). The results of the safety evaluation of the APR+ Main Steam Line Break(MSLB) accident is presented for the most limiting post-trip return-to-power case with the single failure assumption of the Loss Of Offsite Power(LOOP). MARS-KS regulatory safety analysis code has been used to evaluate safety as well as the system behavior during MSLB accident. The MARS-KS analysis results are compared with the results of the MSLB safety analysis presented in the SSAR of the APR+. Independent safety evaluation has been performed using MARS-KS regulatory safety analysis code for the APR+ MSLB accident inside containment for the limiting case of the full power post-trip return-to-power. The results of MARS-KS analysis were compared with the results of the MSLB safety analysis presented in the APR+ SSAR. Due to higher cooldown of the MARS-KS analysis, the MARS-KS analysis results in a higher positive reactivity insertion into the core by the negative moderator and fuel temperature reactivity coefficients than the APR+ SSAR analysis. Both results show no return-to-power during the limiting case of the MSLB inside containment. However, APR+ SSAR moderator temperature reactivity insertion should be evaluated against the MARS-KS moderator density reactivity insertion for is conservatism. This study also clearly shows asymmetric thermal hydraulic behavior during the MSLB accident at intact and affected sides of the downcomer and the core. These asymmetric phenomena should be further investigated for the effects on the system design.

  15. Pseudomonas syringae evades host immunity by degrading flagellin monomers with alkaline protease AprA

    NARCIS (Netherlands)

    Pel, Michiel J C; van Dijken, Anja J H; Bardoel, Bart W; Seidl, Michael F; van der Ent, Sjoerd; van Strijp, Jos A G; Pieterse, Corné M J

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of

  16. Pseudomonas syringae evades host Immunity by degrading flagellin monomers with alkaline protease AprA

    NARCIS (Netherlands)

    Pel, M.J.C.; Van Dijken, A.J.H.; Bardoel, B.W.; Seidl, M.F; Van der Ent, S.; Van Strijp, J.A.G.

    2014-01-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of

  17. Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

    International Nuclear Information System (INIS)

    Lee, Keunsung; Hwang, Do Hun; Chang, Hyun-bin

    2016-01-01

    In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature

  18. Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Keunsung; Hwang, Do Hun [KHNP CRI, Daejeon (Korea, Republic of); Chang, Hyun-bin [Future and Challenge Technology Co., Yongin (Korea, Republic of)

    2016-10-15

    In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature.

  19. Design features of Advanced Power Reactor (APR) 1400 steam generator

    International Nuclear Information System (INIS)

    Park, Tae-Jung; Park, Jun-Soo; Kim, Moo-Yong

    2004-01-01

    Advanced Power Reactor 1400 (APR 1400) which is to achieve the improvement of the safety and economical efficiency has been developed by Korea Hydro and Nuclear Power Co., Ltd. (KHNP) with the support from industries and research institutes. The steam generator for APR 1400 is an evolutionary type from System 80 + , which is the recirculating U-tube heat exchanger with integral economizer. Compared to the System 80 + steam generator, it is focused on the improved design features, operating and design conditions of APR 1400 steam generator. Especially, from the operation experience of Korean Standard Nuclear Power Plant (KSNP) steam generator, the lessons-learned measures are incorporated to prevent the tube wear caused by flow-induced vibration (FIV). The concepts for the preventive design features against FIV are categorized to two fields; flow distribution and dynamic response characteristics. From the standpoint of flow distribution characteristics, the egg-crate flow distribution plate (EFDP) is installed to prevent the local excessive flow loaded on the most susceptible tube to wear. The parametric study is performed to select the optimum design with the efficient mitigation of local excessive flow. ATHOS3 Mod-01 is used and partly modified to analyze the flow field of the APR 1400 steam generator. In addition, the upper tube bundle support is designed to eliminate the presence of tube with a low natural frequency. Based on the improved upper tube bundle support, the modal analysis is performed and compared with that of System 80 + . Using the results of flow distribution and modal analysis, the two mechanisms of flow-induced vibration are investigated; fluid-elastic instability (FEI) and random turbulence excitation (RTE). (authors)

  20. Non-Integrated Standalone Tests of APR1400 Simulator

    International Nuclear Information System (INIS)

    Hwang, Su Hyun; Lee, Jeong Ik; Hong, Soon Joon; Lee, Byung Chul; Seo, Jeong Gwan; Lee, Myung Soo

    2007-01-01

    APR1400 being developed for the construction of New Kori 3 and 4 Units has improved safety and more economical efficiency compared with previous PWR. The ESF(Engineered Safety Features) newly introduced to enhance safety are as follows: DVI (Direct Vessel Injection), Fluidic Device, IRWST (In-containment Refueling Water Storage Tank). So the transient pattern of anticipated accidents will show different characteristics from previous PWR. There are multidimensional flow phenomena like as emergency core cooling coolant bypass discharge in the downcomer, downcomer boiling, and different safety injection characteristics due to fluidic device during LBLOCA. Also there is the phenomenon of critical flow due to the open of pressurizer POSRV (Pilot Operated Safety Relief valve) connected to IRWST and safety depressurization system and the prediction of discharge flow is very important. KEPRI is developing APR1400 simulator using RELAP-RT . RELAP-RT was developed by DS and S (Data systems and Solutions) based on RELAP5/MOD3.2. The improved features of RELAP-RT to function as a simulator are as follows: Add simulator functionality - Control by simulator executive - IC snap and reset capability - Back-track snap and reset capability - Fast time capability. Fast time capability(examples) - The rate of condensation has been limited. - Fictional choking model has been developed for internal junctions. - Wall heat transfer coefficients and heat fluxes has been limited. In this study, various NISTs (Non-Integrated Standalone Tests) were performed to verify the capability of RELAP-RT as APR1400 simulator by the comparison with RELAP5/MOD3.3

  1. APR-246/PRIMA-1Met Inhibits and Reverses Squamous Metaplasia in Human Conjunctival Epithelium.

    Science.gov (United States)

    Li, Jing; Li, Cheng; Wang, Guoliang; Liu, Zhen; Chen, Pei; Yang, Qichen; Dong, Nuo; Wu, Huping; Liu, Zuguo; Li, Wei

    2016-02-01

    Squamous metaplasia is a common pathologic condition in ocular surface diseases for which there is no therapeutic medication in clinic. In this study, we investigated the effect of a small molecule, APR-246/PRIMA-1(Met), on squamous metaplasia in human conjunctival epithelium. Human conjunctival explants were cultured for up to 12 days under airlifting conditions. Epithelial cell differentiation and proliferation were assessed by Cytokeratin 10 (K10), K14, K19, Pax6, MUC5AC, and p63 immunostaining patterns. β-catenin and TCF-4 immunofluorescent staining and real-time PCR characterized Wnt signaling pathway involvement. Pterygium clinical samples were cultured under airlifting conditions with or without APR-246 for 4 days. p63, K10, β-catenin, and TCF-4 expression in pterygial epithelium was determined by immunofluorescent staining and real-time PCR. Airlift conjunctival explants resulted in increased stratification and intrastromal epithelial invagination. Such pathology was accompanied by increases in K10, K14, and p63 expression, whereas K19 and Pax6 levels declined when compared to those in freshly isolated tissue. On the other hand, APR-246 reversed all of these declines in K10, K14, and p63 expression. Furthermore, K19 and Pax6 increased along with rises in goblet cell density. These effects of APR-246 were accompanied by near restoration of normal conjunctival epithelial histology. APR-246 also reversed squamous metaplasia in pterygial epithelium that had developed after 4 days in ex vivo culture. Reductions in squamous metaplasia induced by APR-246 suggest it may provide a novel therapeutic approach in different squamous metaplasia-associated ocular surface diseases.

  2. Preliminary Results Of LOCA Problem For APR1400 Reactor

    International Nuclear Information System (INIS)

    Le Dai Dien; Hoang Minh Giang; Le Thi Thu; Vo Thi Huong; Le Van Hong

    2011-01-01

    Several features of NPP with APR1400 nuclear reactor during a loss of coolant accident (LOCA) are investigated in this study. The report describes some main design characteristics of an engineering safety systems of APR1400 and the thermal hydraulic calculation results for steady-state using MARS and RELAP/SCDAPSIM codes. Large Break LOCA accident has been analyzed and evaluated based on acceptable criteria for ECCS given by US NRC. The results from cold leg break LOCA with broken area of 0.0465 m 2 in case of high pressure safety injection system (HPSI) failed to operate or 2 and 4 HPSI pumps are activated. The preliminary results of this work is a part of collaboration between INST researchers and KAERI experts in using RELAP tool for safety analysis of NPPs. (author)

  3. The Ongoing Rediscovery of Après-Coup as a Central Freudian Concept.

    Science.gov (United States)

    House, Jonathan

    2017-10-01

    Après-coup, Freud's Nachträglichkeit, is an essential psychoanalytic concept structuring each of four concepts, four mental processes that lie at the foundation of Freud's thinking: psychic trauma, repression, the creation of the unconscious, and the creation of infantile sexuality. It is argued here that infantile sexual drives, in contrast to the self-preservative instincts, arise from a two-step process of translation and repression in which the residues of failed translation become source-objects of the drives. These residues of failed translation have an associative resonance with adult sexuality, and the child is driven to ongoing attempts to translate them, to make them meaningful après coup. Thus, après-coup is at the heart of the human subject as a sexual creature who requires, desires, and creates meaning.

  4. Deletion of aprA and nprA genes for alkaline protease A and neutral protease A from bacillus thuringiensis: effect on insecticidal crystal proteins.

    Science.gov (United States)

    Tan, Y; Donovan, W P

    2001-11-17

    The aprA gene encoding alkaline protease A (AprA) was cloned from Bacillus thuringiensis subsp. kurstaki, and the cloned gene was used to construct aprA-deleted (aprA1) strains of B. thuringiensis. An aprA1 strain of B. thuringiensis that contained the wild-type gene for neutral protease A (nprA(+)) displayed levels of extracellular proteolytic activity that were similar to those of an aprA(+)nprA(+) strain. However, when EDTA was included in the protease assay to inhibit NprA activity the aprA1nprA(+) strain displayed only 2% of the extracellular proteolytic activity of the aprA(+)nprA(+) strain. A strain that was deleted for both aprA and nprA (aprA1nprA3 strain) failed to produce detectable levels of proteolytic activity either in the presence or absence of EDTA in the assay. Compared with the aprA(+)nprA(+) strain the aprA1nprA(+) strain yielded 10% more full-length Cry1Bb crystal protein and the aprA1nprA3 strain yielded 25% more full-length Cry1Bb protein. No significant differences were seen in the 50% lethal dose of Cry1Bb protein from aprA(+)nprA(+) and aprA1nprA3 strains against three species of lepidopteran insects. These results suggest that enhanced yield of certain crystal proteins can be obtained by deletion of the genes aprA and nprA which are the major extracellular proteases of B. thuringiensis.

  5. Development of the APR+ Auxiliary Building General Arrangement (GA)

    International Nuclear Information System (INIS)

    Moon, Hyung Keun; Park, Young Sheop; Kang, Yong Chul

    2011-01-01

    The general arrangement (GA) drawing of a nuclear power plant is the most basic drawing which contains all of the plant equipment, systems, and rooms. Therefore, it should be issued at an early design stage to provide the contours of the overall plant structure. This type of drawing is typically used widely throughout the design stages. The development project of APR+ (Advanced Power Reactor+), as a succeeding model of the APR1400 (Advanced Power Reactor 1400) design, has its own GA that encompasses all of its power buildings. This was developed starting in October of 2009. Among several of the buildings in this design, the Auxiliary Building (AB) is one of the most important buildings to produce electricity, and to protect against undesirable radiation emissions. This paper focuses on the design characteristics of the general arrangement of the AB

  6. A Source Term Calculation for the APR1400 NSSS Auxiliary System Components Using the Modified SHIELD Code

    International Nuclear Information System (INIS)

    Park, Hong Sik; Kim, Min; Park, Seong Chan; Seo, Jong Tae; Kim, Eun Kee

    2005-01-01

    The SHIELD code has been used to calculate the source terms of NSSS Auxiliary System (comprising CVCS, SIS, and SCS) components of the OPR1000. Because the code had been developed based upon the SYSTEM80 design and the APR1400 NSSS Auxiliary System design is considerably changed from that of SYSTEM80 or OPR1000, the SHIELD code cannot be used directly for APR1400 radiation design. Thus the hand-calculation is needed for the portion of design changes using the results of the SHIELD code calculation. In this study, the SHIELD code is modified to incorporate the APR1400 design changes and the source term calculation is performed for the APR1400 NSSS Auxiliary System components

  7. System Response Analysis of Rod Ejection Accident for APR1400 Using KNAP Hot Spot Model

    International Nuclear Information System (INIS)

    Kim, Yo-Han; Ha, Sang-Jun; Jun, Hwang-Yong

    2006-01-01

    Korea Electric Power Research Institute (KEPRI) has been developed the non-loss-of-coolant accident (non- LOCA) analysis methodology, called as the Korea Non- LOCA Analysis Package (KNAP), for the typical Optimized Power Reactor 1000 (OPR1000) plants. Considering current licensing methodology conducted by ABB-CE, however, the KNAP could be applied to Advanced Power Reactor 1400 (APR1400) also. In spite of some difference in design concepts of two plant types, there is a close resemblance between their nuclear steam supply systems (NSSS). So, in this study, the rod ejection accident (REA) event was analyzed using KNAP hot spot model (HSM) for APR1400 to estimate the feasibility of the application and the results were compared with those given in APR1400 Standard Safety Analysis Report (SSAR), which were calculated using the CESEC-III and STRIKIN-II code of ABB-CE. Through the study, it was concluded that the KNAP could be applicable to APR1400 on the view point of REA

  8. Homology modeling of dissimilatory APS reductases (AprBA of sulfur-oxidizing and sulfate-reducing prokaryotes.

    Directory of Open Access Journals (Sweden)

    Birte Meyer

    Full Text Available BACKGROUND: The dissimilatory adenosine-5'-phosphosulfate (APS reductase (cofactors flavin adenine dinucleotide, FAD, and two [4Fe-4S] centers catalyzes the transformation of APS to sulfite and AMP in sulfate-reducing prokaryotes (SRP; in sulfur-oxidizing bacteria (SOB it has been suggested to operate in the reverse direction. Recently, the three-dimensional structure of the Archaeoglobus fulgidus enzyme has been determined in different catalytically relevant states providing insights into its reaction cycle. METHODOLOGY/PRINCIPAL FINDINGS: Full-length AprBA sequences from 20 phylogenetically distinct SRP and SOB species were used for homology modeling. In general, the average accuracy of the calculated models was sufficiently good to allow a structural and functional comparison between the beta- and alpha-subunit structures (78.8-99.3% and 89.5-96.8% of the AprB and AprA main chain atoms, respectively, had root mean square deviations below 1 A with respect to the template structures. Besides their overall conformity, the SRP- and SOB-derived models revealed the existence of individual adaptations at the electron-transferring AprB protein surface presumably resulting from docking to different electron donor/acceptor proteins. These structural alterations correlated with the protein phylogeny (three major phylogenetic lineages: (1 SRP including LGT-affected Archaeoglobi and SOB of Apr lineage II, (2 crenarchaeal SRP Caldivirga and Pyrobaculum, and (3 SOB of the distinct Apr lineage I and the presence of potential APS reductase-interacting redox complexes. The almost identical protein matrices surrounding both [4Fe-4S] clusters, the FAD cofactor, the active site channel and center within the AprB/A models of SRP and SOB point to a highly similar catalytic process of APS reduction/sulfite oxidation independent of the metabolism type the APS reductase is involved in and the species it has been originated from. CONCLUSIONS: Based on the comparative

  9. Constrained model predictive control for load-following operation of APR reactors

    International Nuclear Information System (INIS)

    Kim, Jae Hwan; Lee, Sim Won; Kim, Ju Hyun; Na, Man Gyun; Yu, Keuk Jong; Kim, Han Gon

    2012-01-01

    The load-following operation of APR+ reactor is needed to control the power effectively using the control rods and to restrain the reactivity control from using the boric acid for flexibility of plant operation. Usually, the reason why the disproportion of axial flux distribution occurs during load-following operation is xenon-induced oscillation. The xenon has a very high absorption cross-section and makes the impact on the reactor delayed by the iodine precursor. The power maneuvering using automatically load-following operation has advantage in terms of safety and economic operation of the reactor, so the controller has to be designed efficiently. Therefore, an advanced control method that meets the conditions such as automatic control, flexibility, safety, and convenience is necessary to load-following operation of APR+ reactor. In this paper, the constrained model predictive control (MPC) method is applied to design APR reactor's automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control. Some controllers use only the current tracking command, but MPC considers future commands in addition to the current tracking command. So, MPC can achieve better tracking performance than others. Furthermore, an MPC is to used in many industrial process control systems. The basic concept of the MPC is to solve an optimization problem for a finite future time interval at present time and to implement the first optimal control input as the current control input. The KISPAC-1D code, which models the APR+ nuclear power plants, is interfaced to the proposed controller to verify the tracking performance of the reactor power level and ASI. It is known that the proposed controller exhibits very fast tracking responses

  10. Development of an apparatus for measuring the thermal conductivity of irradiated or non-irradiated graphite; Realisation d'un appareil de mesure de la conductibilite thermique du graphite irradie ou non irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bocquet, M; Micaud, G

    1962-07-01

    temperature d'irradiation ont ete deduites (K0 et Ki, coefficients de conductibilite thermique avant et apres irradiation). (auteurs)

  11. Implementation and Analysis for APR1400 Soft Control System

    International Nuclear Information System (INIS)

    2015-01-01

    Due to the rapid advancement of digital technology, the definite technical advantages of digital control system compared to analog control system are accelerating the implementation of advanced distributed digital control system in the nuclear power plant. One of the major advantages of digital control system is the capability of Soft Control System. The design of Soft Control System for Advanced Power Reactor 1400 (APR1400) plant of Man-Machine Interface System (MMIS) is based on full digital technologies to enhance reliability, operability and maintainability. Computer-based compact workstation has been adopted in the APR1400 Main Control Room (MCR) to provide convenient working environment. This paper introduces the approaches and methodologies of Soft Control System for the Advanced Control Room (ACR). This paper also explains major design features for operation and display of the Soft Control System and its implementation to cope with regulatory requirements. (authors)

  12. Verbal Communication in the APR1400 Advanced Control Room

    International Nuclear Information System (INIS)

    Kim, Jong Hyun; Shin, Young Cheol

    2007-01-01

    This paper introduces the characteristics of communication in advanced main controlghd rooms (MCRs) and some observations from a case study performed for APR1400 MCR. In advanced MCRs, operators need not maintain the same communication patterns as they do in conventional ones. For example, a senior reactor operator (SRO) does not have to rely on board operators for information acquisition and can get any information from his/her own workstation. This situation may also bring about new problems in MCRs such as lack of shared situation awareness and collaboration between MCR operators. To cope with these problems, the APR1400 MCR adapts several approaches in design and training for encouraging operators to communicate with each other. This paper introduces the possible changes of communication patterns and the countermeasures in design and training. Some findings from an integrated system validation for Shin Kori Units 3 and 4 are also presented

  13. Vingt ans après…

    Directory of Open Access Journals (Sweden)

    François Burgat

    2002-05-01

    Full Text Available Le dixième numéro des Chroniques Yéménites, publié vingt ans après la création du Centre Français d'Archéologie et de Sciences Sociales de Sanaa reflète des ambitions souvent exprimées: donner une chance aux jeunes chercheurs et couvrir un large éventail disciplinaire au service de l'affirmation de la vocation régionale du Centre. Depuis Sanaa ou Paris, chercheurs, doctorants ou stagiaires, de l'Ecole normale supérieure, de l'INALCO, de l'Université de Sanaa et de bon nombre d'institu...

  14. Seismic analysis of APR1400 RCS for site envelope using big mass method

    International Nuclear Information System (INIS)

    Kim, J. Y.; Jeon, J. H.; Lee, D. H.; Park, S. H.

    2002-01-01

    One of design concepts of APR1400 is the site envelope considering various soil sites as well as rock site. The KSNP's are constructed on the rock site where only the translational excitations are directly transferred to the plant. On the other hand, the rotational motions affect the responses of the structures in the soil cases. In this study, a Big Mass Method is used to consider rotational motions as excitations at the foundation in addition to translational ones to obtain seismic responses of the APR1400 RCS main components. The seismic analyses for the APR1400 excited simultaneously by translation and rotational motions were performed. The results show that the effect of soil sites is not significant for the design of main components and supports of the RCS, but it may be considerable for the design of reactor vessel internals, piping, and nozzles which have lower natural frequencies

  15. Preliminary Design of Optimized Reactor Insulator for Severe Accident Mitigation of APR1400

    International Nuclear Information System (INIS)

    Heo, Sun; Lee, Jae-Gon; Kang, Yong-Chul

    2007-01-01

    APR1400, a Korean evolutionary advance light water reactor, has many advanced safety feature to prevent and mitigate of design basis accident (DBA) and severe accident. When reactor cooling system (RCS) fails to cooling its core, the core melted down and the molten core gathers together on bottom of reactor vessel. The molten core hurts reactor vessel and is released to containment, which raises the release of radioactive isotopes and the heating of the containment atmosphere. Finally, the corium is accumulated in the bottom of reactor cavity and it also raises the Molten Core and Concrete Interaction (MCCI) and the heating of containment atmosphere. There are two strategies to cooling molten core. Those are in-vessel retention and ex-vessel cooling. At the early stage of APR1400 design, only ex-vessel cooling which is cooling of the molten core outside the vessel after vessel failure is considered based on EPRI Utility Requirement Document (URD) for Evolutionary LWR. However, a need has been arisen to reflect current research findings on severe accident phenomena and mitigation technologies to Korean URD and IVRERVC (In-Vessel corium Retention using Ex-Reactor Vessel Cooling) was adopted APR1400. The ERVC is not considered as a licensing design basis but based on the defense-in-depth principle and safety margin basis, which is the top-tier requirement of the severe accident mitigation design as stated in the KURD. The Severe Accident Management strategy for APR1400 is intended to aid the plant operating staff to secure reactor vessel integrity in the early stage of the severe accident. As a part of a design implementation of IVR-ERVC for APR1400, we developed the preliminary design requirement, design specification and conceptual design

  16. Contribution to the study of defects created by {alpha} particles in uranium at 4.2 K; Contribution a l'etude des defauts crees par irradiation a l'aide de particules {alpha} dans l'uranium a 4.2 K

    Energy Technology Data Exchange (ETDEWEB)

    Raharinaivo, A L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    A device is described for the irradiation, in liquid helium, of metallic strips with {alpha} particles produced by radioactive sources. It has thereby been possible to measure changes in resistivity of variously treated uranium samples (cold- worked, annealed, previously exposed to neutrons, etc. ) as a function of the irradiation flux. The annealings carried out after irradiation compare favorably to those effected after a quenching from 100 to 4 K (JOUSSET experiments). The results are discussed; it is concluded that a defect, very probably of the interstitial type, is mobile in uranium at temperatures below 5 K. (author) [French] On decrit un dispositif permettant d'irradier, dans l'helium liquide, des lames metalliques par des particules {alpha} issues de sources radioactives. On a ainsi mesure les variations de resistivite, en fonction du flux d'irradiation, d'uranium diversement traite (ecroui, recuit, prealablement irradie par des neutrons...). Les recuits apres irradiation se comparent bien aux recuits apres trempe de 100 a 4 K (experiences de JOUSSET). L'ensemble des resultats est discute et il conduit a la conclusion qu'un defaut, tres vraisemblablement interstitiel, est mobile dans l'uranium a des temperatures inferieures a 5 K. (auteur)

  17. Single-tube condensation experiment in Passive Auxiliary Feedwater System of APR1400+

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Chang Wook; No, Hee Cheon; Yun, Bong Yo; Jeon, Byong Guk [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2012-05-15

    Conventional Korean nuclear power plants, Advanced Power Reactors (APR), are characterized by an active cooling system. However, Active cooling system may not prevent significant damage without any AC power source available for its operation as vividly illustrated through the recent Fukushima incident. In the APR1400+ to be designed, an independent passive cooling system was added in order to overcome the aforementioned shortcomings. In the Passive Auxiliary Feedwater System (PAFS), gravity force and density difference between steam and water are used. The system comprises of 240 condensation tubes to efficiently remove decay heat. Before applying the PAFS to APR1400+, the system's safety and heat removal performance must be verified. The present study experimentally evaluates the heat removal performance of a single tube in the PAFS. The objectives of SCOP (Single-tube Condensation experiment facility of PAFS) are the evaluation of the heat removal performance in the tube of the PAFS and database construction under various tube designs and test conditions. Reaching these objectives, we developed advanced measurement techniques for the amount of moisture, heat flux, and water film thickness.

  18. aprABC: A Mycobacterium tuberculosis complex-specific locus that modulates pH-driven adaptation to the macrophage phagosome

    Science.gov (United States)

    Abramovitch, Robert B.; Rohde, Kyle H.; Hsu, Fong-Fu; Russell, David G.

    2011-01-01

    Summary Following phagocytosis by macrophages, Mycobacterium tuberculosis (Mtb) senses the intracellular environment and remodels its gene expression for growth in the phagosome. We have identified an Acid and Phagosome Regulated (aprABC) locus that is unique to the Mtb complex and whose gene expression is induced during growth in acidic environments in vitro and in macrophages. Using the aprA promoter, we generated a strain that exhibits high levels of inducible fluorescence in response to growth in acidic medium in vitro and in macrophages. aprABC expression is dependent on the two-component regulator phoPR, linking phoPR signaling to pH sensing. Deletion of the aprABC locus causes defects in gene expression that impact aggregation, intracellular growth, and the relative levels of storage and cell wall lipids. We propose a model where phoPR senses the acidic pH of the phagosome and induces aprABC expression to fine-tune processes unique for intracellular adaptation of Mtb complex bacteria. PMID:21401735

  19. Structural assessments of plate type support system for APR1400 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Anh Tung; Namgung, Ihn, E-mail: inamgung@kings.ac.kr

    2017-04-01

    Highlights: • This paper investigates plate-type support structure for the reactor vessel of the APR 1400. • The tall column supports of APR1400 reactor challenges in seismic and severe accident events. • A plate-type support of reactor vessel was proposed and evaluated based on ASME code. • The plate-type support was assessed to show its higher rigidity than column-type. - Abstract: This paper investigates an alternative form of support structure for the reactor vessel of the APR 1400. The current reactor vessel adopts a four-column support arrangement locating on the cold legs of the vessel. Although having been successfully designed, the tall column structure challenges in seismic events. In addition, for the mitigation of severe accident consequences, the columns inhibit ex-vessel coolant flow, hence the elimination of the support columns proposes extra safety advantages. A plate-type support was proposed and evaluated for the adequacy of meeting the structural stiffness by Finite Element Analysis (FEA) approach. ASME Boiler and Pressure Vessel Code was used to verify the design. The results, which cover thermal and static structural analysis, show stresses are within allowable limits in accordance with the design code. Even the heat conduction area is increased for the plate-type of support system, the results showed that the thermal stresses are within allowable limits. A comparison of natural frequencies and mode shapes for column support and plate-type support were presented as well which showed higher fundamental frequencies for the plate-type support system resulting in greater rigidity of the support system. From the outcome of this research, the plate-type support is proven to be an alternative to current APR column type support design.

  20. Resultats visuels et complications apres chirurgie de la cataracte ...

    African Journals Online (AJOL)

    Resultats visuels et complications apres chirurgie de la cataracte: cas de l' Hopital Ophtalmologique Saint Andre de Tinre au nord-Benin. K.M. Amedome, C.R.A. Assavedo, M Aboudou, K Vonor, N Maneh, K Nonon Saa, K Dzidzinyo, K.D. Ayena, M Banla, K Balo ...

  1. Radioprotective properties of certain nitrogenous compounds heterocyclic on the serum proteins of irradiated mice; Proprietes radioprotectrices de certains heterocycles azotes sur les proteines seriques de souris irradiees

    Energy Technology Data Exchange (ETDEWEB)

    Pierotti, T; Roushdy, H; Polverelli, M; Mazza, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The results obtained from this study suggest the following: the concentration of total serum proteins in mice is very little changed during all the treatments carried out, while protein fractions showed significant alterations. The concentrations of various serum proteins remain almost constant under normal conditions. Intraperitoneal administration of imidazole or benzimidazole at the mentioned doses induces rapid quantitative changes in the serum which are recovered in about 3 days Whole-body X-irradiation at 750 roentgens creates slow but progressive and persisting serious changes in a concentration of serum protein fractions which end by death of animals at the 8 - 10. day after irradiation. Whole-body X-irradiation of imidazole or benzimidazole protected animals results in quantitative rapid changes in concentration of serum protein fractions, for about four days after which a slow but steady restoration begins. The concentration approaches the normal levels towards the 10. day after irradiation. Imidazole and benzimidazole were proved to be good radio-protectants against the effects of radiation on serum protein fractions. Benzimidazole seems to surpass imidazole. (authors) [French] L'action radioprotectrice de l'imidazole et du benzimidazole a ete mise en evidence dans des travaux anterieurs. Dans ce travail cette action est etudiee au niveau des proteines seriques de souris irradiees. Les resultats obtenus sont les suivants: pas de variation notable de la concentration des proteines totales quel que soit le traitement applique, mais variations importantes de chaque fraction proteinique. Apres injection intraperitoneale des radioprotecteurs on assiste a de brusques variations de la concentration des proteines du serum, variations qui s'estompent trois jours apres l'injection. L'irradiation in toto a 750 roentgens entraine aussi de profonds changements de concentration des proteines du serum que l'on observe du jour de l'irradiation jusqu'a la mort des

  2. Irradiations at low temperatures. 1. part: devices designs; Les irradiations aux basses temperatures. Premiere partie: conception des dispositifs

    Energy Technology Data Exchange (ETDEWEB)

    Conte, R.R. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    After an attempt to sort out the irradiation devices, the different refrigeration systems used: stored liquid or refrigerators, are presented. Some financial aspects of these two systems are discussed. For a long run, 1000 hr per year (100 hr for He) the refrigerator become less expensive than stored liquid devices. Some ideas about the principal criterions in the device design are discussed. Finally a few elements making easier the calculation of the different parts of a cryostat are given. (author) [French] Apres un essai de classification des dispositifs d'irradiation, on presente les divers modes de refrigeration: liquides stockes ou refrigerateurs. On discute quelques aspects financiers des deux principes. Il apparait que pour des durees de fonctionnement d'environ 1 000 heures par an les refrigerateurs deviennent plus rentables (-100 heures pour He). On classe ensuite quelques idees sur les principaux criteres de conception des dispositifs. Enfin on donne quelques elements facilitant le calcul des differentes parties d'un cryostat. (auteur)

  3. Irradiations at low temperatures. 1. part: devices designs; Les irradiations aux basses temperatures. Premiere partie: conception des dispositifs

    Energy Technology Data Exchange (ETDEWEB)

    Conte, R R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    After an attempt to sort out the irradiation devices, the different refrigeration systems used: stored liquid or refrigerators, are presented. Some financial aspects of these two systems are discussed. For a long run, 1000 hr per year (100 hr for He) the refrigerator become less expensive than stored liquid devices. Some ideas about the principal criterions in the device design are discussed. Finally a few elements making easier the calculation of the different parts of a cryostat are given. (author) [French] Apres un essai de classification des dispositifs d'irradiation, on presente les divers modes de refrigeration: liquides stockes ou refrigerateurs. On discute quelques aspects financiers des deux principes. Il apparait que pour des durees de fonctionnement d'environ 1 000 heures par an les refrigerateurs deviennent plus rentables (-100 heures pour He). On classe ensuite quelques idees sur les principaux criteres de conception des dispositifs. Enfin on donne quelques elements facilitant le calcul des differentes parties d'un cryostat. (auteur)

  4. Containment Performance Analysis with Large Break LOCA for EU-APR1400

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Keun Sung; Kim, Yong Soo

    2013-01-01

    In this paper for containment performance analysis, the containment pressurization analysis is performed and thermo-hydraulic response analysis of containment structure is carried out to provide basic understanding of containment transient states under a severe accident sequence. Especially, in EU-APR1400 design, to reduce containment pressure and temperature, Severe Accident Containment Spray System (SACSS) is designed to be actuated automatically when Core Exit Temperature (CET) reaches 922 K (649 .deg. C). The containment performance analysis was carried on LBLOCA sequence for EU-APR1400 with SACSS through MAAP code. If SACSS is actuated when CET reaches 922 K (649 .deg. C) , the containment pressure and temperature decrease to a sufficient low level. The predicted atmospheric pressure of containment will not exceed the ultimate pressure capacity (UPC) and have a sufficient margin to it even though the UPC of the reference plant (Shin-Kori Units 3 and 4) is used instead because the UPC calculation for EU-APR1400 has not been completed. The largest load on the containment by LBLOCA is estimated at 306.1 kPa. Thus the margin to UPC is estimated to be 330 % in comparison with 1.329 MPa as UPC for the reference plant.

  5. Irradiation behaviour of mixed uranium-plutonium carbides, nitrides and carbonitrides; Comportement a l'irradiation de carbures, nitrures et carbonitrures mixtes d'uranium et de plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Mikailoff, H; Mustelier, J P; Bloch, J; Leclere, J; Hayet, L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    In the framework of the research program of fast reactor fuels two irradiation experiments have been carried out on mixed uranium-plutonium carbides, nitrides and carbo-nitrides. In the first experiment carried out with thermal neutrons, the fuel consisted of sintered pellets sheathed in a stainless steel can with a small gap filled with helium. There were three mixed mono-carbide samples and the maximum linear power was 715 W/cm. After a burn-up slightly lower than 20000 MW day/tonne, a swelling of the fuel which had ruptured the cans was observed. In the second experiment carried out in the BR2 reactor with epithermal neutrons, the samples consisted of sintered pellets sodium bonded in a stainless steel tube. There were three samples containing different fuels and the linear power varies between 1130 and 1820 W/cm. Post-irradiation examination after a maximal burn-up of 1550 MW day/tonne showed that the behaviour of the three fuel elements was satisfactory. (authors) [French] Dans le cadre du programme d'etude des conibustiles pour reacteurs rapides, on a realise deux experiences d'irradiation de carbures, nitrures et carbonitrures mixtes d'uranium et de plutonium. Dans la premiere experience, faite en neutrons thermiques, le combustible etait constitue de,pastilles frittees gainees dans un tube d'acier inoxydable avec un faible jeu rempli d'helium. Il y avait trois echantillons de monocarbures mixtes, et la puissance lineaire maximale etait de 715 W/cm. Apres un taux de combustion legerement inferieur a 20 000 MWj/t, on a observe un gonflement des combustible qui a provoque, la rupture des gaines. Pans la seconde experience, realisee dans le reacteur BR2 en neutrons epithermiques, les echantillons etaient constitues de pastilles frittees gainees dans un tube d'acier avec un joint sodium. Il y avait trois echantillons contenant des combustibles differents, et la puissance lineaire variait de 1130 a 1820 W/cm. Les examens apres irradiation a un taux maximal de

  6. Application of the risk-informed methodology for APR1400 P-T limits curve

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.; Namgung, I. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-07-01

    A reactor pressure vessel (RPV) in a nuclear power plant has operational limits of pressure and temperature to prevent a potential drastic propagation of cracks due to brittle fracture. We call it a pressure-temperature limits curve (P-T limits curve). Appendix G of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, provides deterministic procedures to develop the P-T limits curve for the reactor pressure vessel. Recently, an alternative risk-informed methodology has been added in the ASME Code. Risk-informed means that we can consider insights from a probabilistic risk assessment by using this methodology. This alternative methodology provides a simple procedure to develop risk-informed P-T limits for heat up, cool down, and hydrostatic test events. The risk-informed P-T limits curve is known to provide more operational flexibility, particularly for reactor pressure vessels with relatively high irradiation levels and radiation sensitive materials. In this paper, we developed both the deterministic and a risk-informed P-T limits curve for an APR1400 reactor using Appendix G of the ASME Code, Section XI and compare the results in terms of additional operational margin. (author)

  7. MDEP Design-Specific Common Position CP-APR1400WG-01. Common position addressing Fukushima Daiichi nuclear power plant accident

    International Nuclear Information System (INIS)

    2016-05-01

    The MDEP APR1400 Working Group (APR1400WG) members consist of members from Republic of Korea, United Arab Emirates, and the United States. A main objectives of MDEP is to encourage convergence of code, standard and safety goals with exploring the opportunities for harmonization of regulatory practice and cooperation on safety review of APR-1400 specific designs. This common position addressing is aimed at sharing knowledge, information and experience on safety improvement related to lessons learned from the Fukushima Daiichi NPP Accident or Fukushima Daiichi NPP Accident-related issues amongst APR-1400 WG member states to achieve the MEDP goal. Because not all of these Regulators have completed the regulatory review of their APR1400 applications yet, this paper identifies common preliminary approaches to address potential safety improvements for APR1400 plants, as well as common general expectations for new nuclear power plants, as related to lessons learned from the Fukushima Daiichi NPP Accident or Fukushima Daiichi NPP Accident-related issues. While some asymmetry exists among those of three Regulators in terms of design, regulatory practice and licensing milestone sharing information and common understanding on post-Fukushima Daiichi NPP Accident enhancement would be promote resilient design for countering beyond design extreme external event like Fukushima Daiichi NPP nuclear disaster. This common position paper aims at identifying characteristics of post-Fukushima Daiichi NPP Accident enhancements putting in place by each country and setting common position to achieve balanced and harmonized APR-1400 design. After the safety reviews of the APR1400 design applications that are currently in review are completed, the regulators will update this paper to reflect their safety conclusions regarding the APR1400 design and how the design could be enhanced to address Fukushima Daiichi NPP Accident-related issues. The common preliminary approaches are organised into

  8. Uncertainty Evaluation of a Postulated LBLOCA for APR+ using KINS Realistic Evaluation Methodology and MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Min Jeong; Marigomena, Ralph; Yoo, Tae Ho; Kim, Y. S.; Sim, S. K. [Environment and Energy Technology, Inc., Daejeon (Korea, Republic of); Bang, Young Seok [KINS, Daejeon (Korea, Republic of)

    2014-05-15

    As a part of the regulatory safety research, Korea Institute of Nuclear Safety(KINS) also developed a best estimate safety analysis regulatory audit code, MARS-KS, to realistically predict and better understand the physical phenomena of the design basis accidents. KINS improved uncertainty propagation methodology using MARS-KS and applied the improved uncertainty evaluation method for the Shinkori Units 3 and 4 LBLOC. This study is to evaluate the uncertainty propagation of a postulated LBLOCA and quantify the safety margin using KINS-REM and MARS-KS code for the APR+ (Advanced Pressurizer Reactor Plus) Standard Safety Analysis Report(SSAR) which is under regulatory review by the KINS for its design approval. KINS-REM LBLOCA realistic evaluation methodology was used for the regulatory assessment of the APR+ LBLOCA using MARS-KS to evaluate the uncertainty propagation of the uncertainty variables as well as to assess the safety margin during the limiting case of the APR+ double ended guillotine cold leg LBLOCA. Uncertainty evaluation for the APR+ LBLOCA shows that the reflood PCT with upper limit of 95% probability at 95% confidence level is 1363.2 K and is higher than the blowdown PCT95/95 of 1275.3 K. The result shows that the current evaluation of APR+ LBLOCA PCT is within the acceptance criteria of 1477 K ECCS.

  9. [Evaluation of the capacity of the APR-DRG classification system to predict hospital mortality].

    Science.gov (United States)

    De Marco, Maria Francesca; Lorenzoni, Luca; Addari, Piero; Nante, Nicola

    2002-01-01

    Inpatient mortality has increasingly been used as an hospital outcome measure. Comparing mortality rates across hospitals requires adjustment for patient risks before making inferences about quality of care based on patient outcomes. Therefore it is essential to dispose of well performing severity measures. The aim of this study is to evaluate the ability of the All Patient Refined DRG system to predict inpatient mortality for congestive heart failure, myocardial infarction, pneumonia and ischemic stroke. Administrative records were used in this analysis. We used two statistics methods to assess the ability of the APR-DRG to predict mortality: the area under the receiver operating characteristics curve (referred to as the c-statistic) and the Hosmer-Lemeshow test. The database for the study included 19,212 discharges for stroke, pneumonia, myocardial infarction and congestive heart failure from fifteen hospital participating in the Italian APR-DRG Project. A multivariate analysis was performed to predict mortality for each condition in study using age, sex and APR-DRG risk mortality subclass as independent variables. Inpatient mortality rate ranges from 9.7% (pneumonia) to 16.7% (stroke). Model discrimination, calculated using the c-statistic, was 0.91 for myocardial infarction, 0.68 for stroke, 0.78 for pneumonia and 0.71 for congestive heart failure. The model calibration assessed using the Hosmer-Leme-show test was quite good. The performance of the APR-DRG scheme when used on Italian hospital activity records is similar to that reported in literature and it seems to improve by adding age and sex to the model. The APR-DRG system does not completely capture the effects of these variables. In some cases, the better performance might be due to the inclusion of specific complications in the risk-of-mortality subclass assignment.

  10. Design of a Load Following Controller for APR+ Nuclear Plants

    International Nuclear Information System (INIS)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun; Yu, Keuk Jong

    2011-01-01

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  11. Design of a Load Following Controller for APR+ Nuclear Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun [Chosun University, Gwnagju (Korea, Republic of); Yu, Keuk Jong [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2011-08-15

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  12. Early Post-Irradiation Changes in the Metabolism of Biogenic Amines; Les Changements Precoces du Metabolisme des Amines Biogenes apres Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Deanovic, Z [Institut Rudjer Boskovic, Zagreb, Yugoslavia (Croatia)

    1971-03-15

    There is accumulating evidence for the radiation-induced release of biogenic amines from their body stores. Having in mind the high patho-physiological activity of these ''local'' hormones and ''neuro-hormones'', it is reasonable to assume that they play an important role in the pathogenesis of the acute radiation syndrome. Under these pathological conditions the possible synergic and antagonistic effects of biogenic amines due to their complex interactions must be taken into consideration. The extent and dose-dependence of post-irradiation changes in the metabolism of histamine, serotonin, catecholamines and acetylcholine will be examined regarding particularly the search for biochemical indicators of radiation injury. The determination of bio-amines and their metabolites in urine seems to be a suitable method for following up those metabolic changes which could be of a biodosimetrical and/or prognostical value. Data published on this subject, obtained in experimental animals as well as in man, have been reviewed and the applicability of these tests is discussed. (author) [French] Des preuves se sont accumulees, qui demontrent que les amines biogenes sont liberees de leurs depots sous l'effet des rayonnements ionisants. Etant donne la grande activite pathophysiologique de ces hormones 'locales' et 'neurohormones', il est raisonnable de considerer que ces substances biogenes jouent un role important dans la pathogenese du syndrome aigu d'irradiation. Dans ces conditions pathologiques il faut tenir compte des effets synergiques et antagonistes des bio-amines, lies a des interactions compliquees. Les changements metaboliques en fonction de la dose recue font l'objet d'un examen qui englobe les alterations quantitatives de .'histamine, de la serotonine, des catecholamines et de l'acetylcholine et dont l'objectif est la recherche sur des indicateurs biochimiques de la lesion provoquee par l'irradiation. L'analyse des bio-amines et de leurs metabolites dans les urines

  13. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study: rationale and methods.

    Science.gov (United States)

    Kaplan, Bonnie J; Giesbrecht, Gerald F; Leung, Brenda M Y; Field, Catherine J; Dewey, Deborah; Bell, Rhonda C; Manca, Donna P; O'Beirne, Maeve; Johnston, David W; Pop, Victor J; Singhal, Nalini; Gagnon, Lisa; Bernier, Francois P; Eliasziw, Misha; McCargar, Linda J; Kooistra, Libbe; Farmer, Anna; Cantell, Marja; Goonewardene, Laki; Casey, Linda M; Letourneau, Nicole; Martin, Jonathan W

    2014-01-01

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their offspring and many of their partners). The primary aims of the APrON study were to determine the relationships between maternal nutrient intake and status, before, during and after gestation, and (1) maternal mood; (2) birth and obstetric outcomes; and (3) infant neurodevelopment. We have collected comprehensive maternal nutrition, anthropometric, biological and mental health data at multiple points in the pregnancy and the post-partum period, as well as obstetrical, birth, health and neurodevelopmental outcomes of these pregnancies. The study continues to follow the infants through to 36 months of age. The current report describes the study design and methods, and findings of some pilot work. The APrON study is a significant resource with opportunities for collaboration. © 2012 John Wiley & Sons Ltd.

  14. Veselības aprūpes iemaņas pusaudžiem bērnu namā

    OpenAIRE

    Zūpe, Daira

    2008-01-01

    Pētniecības darbā „Veselības aprūpes iemaņas pusaudžiem bērnu namā” autore Daira Zūpe izpēta un analizē vienu no bērnu namu aktuālajām problēmām veselības profilakses veicināšanā – veselības aprūpes iemaņu attīstīšanu. Pētījumā uzmanība pievērsta māsas lomai bērnu nama pusaudžu veselības aprūpes procesā, kur akcentēta veselības aprūpes pamatiemaņu nozīme veselības vecināšanā - fiziskās aktivitātes, ēšanas paradumi, kaitīgie ieradumi un higiēnas iemaņas. Pētniecības darba zinātniskā vadītā...

  15. Aprūpes īpatnības bērniem ar Dauna sindromu stacionārā

    OpenAIRE

    Lūse, Ērika

    2015-01-01

    Bakalaura darba tēma – Aprūpes īpatnības bērniem ar Dauna sindromu stacionārā. Tēmas aktualitāte pievērst uzmanību bērna ar Dauna sindroma aprūpei, kā arī mazināt stereotipus par šiem bērniem. Darba mērķis ir izpētīt Dauna sindromu un māsas lomu šo bērnu aprūpē, kā arī aprūpes īpatnības. Pētniecības uzdevumi ir veikt zinātniskās literatūras analīzi, pētījuma atbilstošas māszinību teorijas atlasi, izstrādāt anketu, veikt pilot pētījumu, iegūto datu apkopošanu, analīze un secinājumu veikšana. I...

  16. Re-irradiation after salvage mastectomy for local recurrence after a conservative treatment: a retrospective analysis of twenty patients (Nancy: 1988-2001); Re-irradiation parietale apres mastectomie de rattrapage pour recidive d'un cancer du sein apres traitement conservateur: etude retrospective sur 20 patientes (Nancy: 1988-2001)

    Energy Technology Data Exchange (ETDEWEB)

    Racadot, S.; Marchal, C.; Charra-Brunaud, C.; Peiffert, D.; Bey, P. [Centre Alexis-Vautrin, Service de Radiotherapie, 54 - Vandoeuvre-les-Nancy (France); Verhaeghe, J.L. [Centre Alexis-Vautrin, Service de Chirurgie, 54 - Vandoeuvre-les-Nancy (France)

    2003-12-01

    Purpose. - To retrospectively assess the efficacy of post-mastectomy re-irradiation for local relapse of breast cancer. Patients and methods. - Twenty patients, initially treated by conservative surgery and radiotherapy (50 Gy in 25 fractions over 5 weeks) were treated from 1998 to 2001 for a local relapse by salvage mastectomy and re-irradiation (either electron or photon beams). Mean age was 53 years (31-71). Reasons for re-irradiation were that the local relapses were inflammatory (4 pts), multifocal (5 pts), cutaneous (5 pts), involved the nipple (3 pts) or because the surgical margins (either muscle or skin) were involved (3 pts). The median dose of re-irradiation was 45 Gy (33-65) in 15 fractions over 33 days. Mean follow-up was 48 months (5-97). Results. - Fifteen patients remained free of a second local recurrence and 10 were still alive, without metastasis. Neither the dose of re-irradiation nor the irradiated surfaces were prognostic factors of local control (P = 0.877 and P = 0.424). Five patients developed radiation-induced pneumonitis without functional respiratory impairment. The incidence of pneumonitis seemed to be related to the biological dose of re-irradiation (P = 0.037). Other late complications occurred such as pigmentation changes (12 pts), telangiectasia (8 pts), chondritis (2 pts), parietal fibrosis (7 pts), rib fractures (4 pts), severe pain (11 pts) and lymphedema (2 pts). The increase in biological equivalent dose was highly statistically linked with the occurrence of disabling pain (P = 0.0123). Conclusion. - Parietal re-irradiation achieves good and lasting local control with an acceptable rate of acute complications but with a risk of disabling late sequelae such as severe pain. (author)

  17. APR1400 Electrical Power System Conformance to SECY-91-078

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Che-Wung; Kim, Yun-Ho [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    In this paper, the APR1400 electric power system for NRC-DC was described. In addition, the conformance to SECY 91-078 was evaluated. Enclosure 1 of the SECY provides an overview of the issue and states that the staff concludes that feeding the safety buses from the offsite power sources through non-safety buses or from a common transformer winding with non-safety loads is not the most reliable configuration. Such an arrangement increases the difficulty in properly regulating voltage at the safety buses, subjects the safety loads to transients caused by the non-safety loads, and adds additional failure points between the offsite power sources and safety loads. Therefore, it is the staff’s position that at least one offsite circuit to each redundant safety division should be supplied directly from one of the offsite power sources with no intervening non-safety buses, in such a manner that the offsite source can power the safety buses upon a failure of any non-safety bus. The APR1400 does not have an intervening nonsafety bus in the current offsite to onsite electrical configuration; however, the design does include nonsafety and safety buses coming from the same secondary side 4.16 kV transformer winding. Nevertheless, the APR1400 has designed the electrical interface system between offsite and onsite power with enhanced reliability measures to ensure that the nonsafety system will not impact the safety loads. The design complies with GDC 17 and also conforms to SECY-91-078.

  18. Quality Control of Concrete Structure For APR1400 Construction

    International Nuclear Information System (INIS)

    Seo, Inseop; Song, Changhak; Kim, Duill

    2012-01-01

    Nuclear structure shall be constructed to protect internal facilities in the normal operation against external accidents such as the radiation shielding, earthquakes and to be leak-proof of radioactive substances to the external environment in case of loss of coolants. containment and auxiliary building of nuclear power plants are built in reinforced concrete structures to maintain these protection functions. Nuclear structures shall be designed to ensure soundness in operation since they are located on the waterfront where is easy do drain the cooling water and so deterioration and damage of concrete structures caused by seawater can occur. Durability is ensured for concrete structures of APR1400, a Korea standard NPP, in compliance with all safety requirements. In particular, owners perform quality control directly on the production and pouring of cast in place concrete for the concrete structure construction to make sure concrete structures established with quality homogeneity and durability. This report is to look into the quality control standard and management status of cast in place concrete for APR1400 construction

  19. Study on Applicability of 10 CFR Part 21 to APR1400 DC Project

    International Nuclear Information System (INIS)

    Shin, He Young; Lee, Do Hwan; Lim, Jae Yong

    2014-01-01

    The tools such as NCR (non conformance report), CAR (corrective action request) and CAP (corrective action program) are widely used for that purpose based upon the rule of 10 CFR Part 50 Appendix B and the ASME Code NQA-1 requirements. These are the tools for a utility, as a purchaser taking over related basic components and services, to ensure strong quality assurance. During the conduct of the project for the acquisition of the standard design certification for APR1400 nuclear power plants from the U. S. NRC (APR1400 DC Project), a new CAP procedure that is appropriate to conduct this unique project was developed. However, it was also recommended to comply with the requirements under 10 CFR Part 21 which enhances nuclear safety quality assurances. Consequently, a new QA procedure is developed in order to deal with the 10 CFR Part 21 issues and this is integrated to the CAP procedure In this paper, the current corrective action program for the APR1400 DC project is introduced and the result of the study on the applicability of 10 CFR Part 21 to the project is indicated. In addition, further improving aspects to be considered are identified. As a frontier project to obtain the standard design certification for APR 1400 model from the U. S. NRC, a modified CAP procedure is developed and enhanced to deal with safety concerning issues in accordance with 10 CFR Part 21. In addition, the newly established QA procedure to directly control the reportability on 10 CFR Part 21 is interfaced into the existing CAP procedure

  20. Electron microscope study of irradiated beryllium oxide; Etude au microscope electronique de l'oxyde de beryllium irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bisson, A A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    The beryllium oxide is studied first by fractography, before and after irradiation, using sintered samples. The fractures are examined under different aspects. The higher density sintered samples, with transgranular fractures are the most interesting for a microscopic study. It is possible to mark the difference between the 'pores' left by the sintering process and the 'bubbles' of gases that can be produced by former thermal treatments. After irradiation, the grain boundaries are very much weakened. By annealing, it is possible to observe the evolution of the gases produced by the reaction (n, 2n) and (n. {alpha}) and gathered on the grain boundaries. The irradiated beryllium oxide is afterwards studied by transmission. For that, a simple method has been used: little chips of the crushed material are examined. Clusters of point defects produced by neutrons are thus detected in crystals irradiated at the three following doses: 6 x 10{sup 19}, 9 x 10{sup 19} and 2 x 10{sup 20} n{sub f} cm{sup -2} at a temperature below 100 deg. C. For the irradiation at 6 x 10{sup 19} n{sub f} cm{sup -2}, the defects are merely visible, but at 2 x l0{sup 20} n{sub f} cm{sup -2} the crystals an crowded with clusters and the Kikuchi lines have disappeared from the micro-diffraction diagrams. The evolution of the clusters into dislocation loops is studied by a series of annealings. The activation energy (0,37 eV) calculated from the annealing curves suggests that it must be interstitials that condense into dislocation loops. Samples irradiated at high temperatures (650, 900 and 1100 deg. C) are also studied. In those specimens the size of the loops is not the same as the equilibrium size obtained after out of pile annealing at the same temperature. Those former loops are more specifically studied and their Burgers vector is determined by micro-diffraction. (author) [French] L'oxyde de beryllium est d'abord etudie, par une methode fractographique, avant et apres irradiation, en

  1. Assistant Personal Robot (APR: Conception and Application of a Tele-Operated Assisted Living Robot

    Directory of Open Access Journals (Sweden)

    Eduard Clotet

    2016-04-01

    Full Text Available This paper presents the technical description, mechanical design, electronic components, software implementation and possible applications of a tele-operated mobile robot designed as an assisted living tool. This robotic concept has been named Assistant Personal Robot (or APR for short and has been designed as a remotely telecontrolled robotic platform built to provide social and assistive services to elderly people and those with impaired mobility. The APR features a fast high-mobility motion system adapted for tele-operation in plain indoor areas, which incorporates a high-priority collision avoidance procedure. This paper presents the mechanical architecture, electrical fundaments and software implementation required in order to develop the main functionalities of an assistive robot. The APR uses a tablet in order to implement the basic peer-to-peer videoconference and tele-operation control combined with a tactile graphic user interface. The paper also presents the development of some applications proposed in the framework of an assisted living robot.

  2. Regulation mechanisms of the FLT3-ligand after irradiation; Mecanismes de regulation du FLT3-ligand apres irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Prat-Lepesant, M

    2005-06-15

    The hematopoietic compartment is one of the most severely damaged after chemotherapy, radiotherapy or accidental irradiations. Whatever its origin, the resulting damage to the bone marrow remains difficult to evaluate. Thus, it would be of great interest to get a biological indicator of residual hematopoiesis in order to adapt the treatment to each clinical situation. Recent results indicated that the plasma Flt3 ligand concentration was increased in patients suffering from either acquired or induced aplasia, suggesting that Flt3 ligand might be useful as a biological indicator of bone marrow status. We thus followed in a mouse model as well as in several clinical situations the variations in plasma Flt3 ligand concentration, after either homogeneous or heterogeneous irradiations. These variations were correlated to the number of hematopoietic progenitors and to other parameters such as duration and depth of pancytopenia. The results indicated that the concentration of Flt3 ligand in the blood reflects the bone marrow status, and that the follow-up of plasma Flt3 ligand concentration could give predictive information about the bone marrow function and the duration and severity of pancytopenia and thrombocytopenia. Nevertheless, the clinical use of Flt3 ligand as a biological indicator of bone marrow damage require the knowledge of the mechanisms regulating the variations in plasma Flt3 ligand concentration. We thus developed a study in the mouse model. The results indicated that the variations in plasma Flt3 ligand variations were not solely due to a balance between its production by lymphoid cells and its consumption by hematopoietic cells. Moreover, we showed that T lymphocytes are not the main regulator of plasma Flt3 ligand concentration as previously suggested, and that other cell types, possibly including bone marrow stromal cells, might be strongly implicated. These results also suggest that the Flt3 ligand is a main systemic regulator of hematopoiesis

  3. Apreçando Derivativos de Crédito no Brasil Credit Derivatives Pricing in Brazil

    Directory of Open Access Journals (Sweden)

    Jorge C. Kapotas

    2004-12-01

    Full Text Available Neste artigo apresentamos os principais modelos de apreçamento de instrumentos de crédito onde desenvolvem-se as equações de apreçamento de debêntures. Para tal, utilizam-se os modelos estruturais, de intensidade e, finalmente, de rating. A seguir, definimos o que são derivativos de crédito (CDS e derivamos fórmulas de apreçamento para estes instrumentos. Concluímos este artigo com uma aplicação ao mercado brasileiro. In this paper we present the main models used for pricing defaultable bonds and credit derivatives. The Merton structural model, the intensity framework and a Ratings based model are considered. We apply these techniques to the pricing of credit derivatives on Brazilian US$-indexed treasury bonds.

  4. Contribution to the study of defects created by {alpha} particles in uranium at 4.2 K; Contribution a l'etude des defauts crees par irradiation a l'aide de particules {alpha} dans l'uranium a 4.2 K

    Energy Technology Data Exchange (ETDEWEB)

    Raharinaivo, A.L. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    A device is described for the irradiation, in liquid helium, of metallic strips with {alpha} particles produced by radioactive sources. It has thereby been possible to measure changes in resistivity of variously treated uranium samples (cold- worked, annealed, previously exposed to neutrons, etc. ) as a function of the irradiation flux. The annealings carried out after irradiation compare favorably to those effected after a quenching from 100 to 4 K (JOUSSET experiments). The results are discussed; it is concluded that a defect, very probably of the interstitial type, is mobile in uranium at temperatures below 5 K. (author) [French] On decrit un dispositif permettant d'irradier, dans l'helium liquide, des lames metalliques par des particules {alpha} issues de sources radioactives. On a ainsi mesure les variations de resistivite, en fonction du flux d'irradiation, d'uranium diversement traite (ecroui, recuit, prealablement irradie par des neutrons...). Les recuits apres irradiation se comparent bien aux recuits apres trempe de 100 a 4 K (experiences de JOUSSET). L'ensemble des resultats est discute et il conduit a la conclusion qu'un defaut, tres vraisemblablement interstitiel, est mobile dans l'uranium a des temperatures inferieures a 5 K. (auteur)

  5. Écrire (d’après

    Directory of Open Access Journals (Sweden)

    Denis Saint-Amand

    2009-03-01

    Full Text Available De l’allusion à la citation, de l’emprunt criard au plagiat déguisé, les jeux d’influences et d’aller-retour avec tel ou tel modèle, grand ou mineur, ont toujours participé de l’élaboration du texte littéraire. Si l’intertextualité est sans aucun doute née en même temps que l’écriture (ou quelques minutes après et que, comme ont pu le montrer notamment Jacques-Philippe Saint-Gérand et Daniel Sangsue, les facettes multiples qu’elle déploie ont toujours suscité l’attention des hommes de lettre...

  6. New tools for NTD vaccines: A case study of quality control assays for product development of the human hookworm vaccine Na-APR-1M74.

    Science.gov (United States)

    Pearson, Mark S; Jariwala, Amar R; Abbenante, Giovanni; Plieskatt, Jordan; Wilson, David; Bottazzi, Maria Elena; Hotez, Peter J; Keegan, Brian; Bethony, Jeffrey M; Loukas, Alex

    2015-01-01

    Na-APR-1(M74) is an aspartic protease that is rendered enzymatically inactive by site-directed mutagenesis and is a candidate antigen component in the Human Hookworm Vaccine. The mutant protease exerts vaccine efficacy by inducing antibodies that neutralize the enzymatic activity of wild type enzyme (Na-APR-1wt) in the gut of the hookworm, thereby depriving the worm of its ability to digest its blood meal. Previously, canines immunized with Na-APR-1(M74) and challenged with Ancylostoma caninum were partially protected against hookworm challenge infection, especially from the loss in hemoglobin observed in control canines and canine immunoglobulin (Ig) G raised against Na-APR-1 was shown to inhibit the enzymatic activity of Na-APR-1 wt in vitro, thereby providing proof of concept of Na-APR-1(M74) as a vaccine antigen. The mutated version, Na-APR-1(M74), was then expressed at the cGMP level using a Nicotiana benthamiana expression system (Fraunhofer, CMB, Delaware, MD), formulated with Alhydrogel®, and used to immunize mice in a dose-ranging study to explore the enzyme-neutralizing capacity of the resulting anti- Na-APR-1(M74) IgG. As little as 0.99 μg of recombinant Na-APR-1(M74) could induce anti Na-APR-1(M74) IgG in mice that were capable of inhibiting Na-APR-1w t-mediated digestion of a peptide substrate by 89%. In the absence of enzymatic activity of Na-APR-1(M74) as a surrogate marker of protein functionality, we developed an assay based on the binding of a quenched fluorescence-labeled inhibitor of aspartic proteases, BODIPY-FL pepstatin A (BDP). Binding of BDP in the active site of Na-APR-1 wt was demonstrated by inhibition of enzymatic activity, and competitive binding with unlabelled pepstatin A. BDP also bound to Na-APR-1(M74) which was assessed by fluorescence polarization, but with an ∼ 50-fold reduction in the dissociation constant. Taken together, these assays comprise a "toolbox" that could be useful for the analyses of Na-APR-1(M74) as it

  7. Analytical Assessment of Environmental Impact for APR1400DC UHS Cooling Tower

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaiho [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Hot process water is pumped from the plant process to the cooling towers. Heat is rejected through evaporation of the process water, interacting with ambient air blown upward by fans.. Plumes generated from exit ports of the cooling tower may have adverse effects on the environment, such as deposition of cooling tower drift release, fogging, icing, shadowing, and ground-level temperature and humidity increase. These kinds of environmental impact of the cooling tower are linked closely with the dispersion of the cooling tower plumes. In this respect, predicting the behavior of the plumes has become one of the most important issues in the environmental assessments of the cooling towers. The SACTI (seasonal/annual cooling tower impact) model is an analytical tool to predict the environmental effect of cooling tower, which was developed by Argonne National Laboratory and University of Illinois with support from EPRI (electric power research institute). The initial version of SACTI has been widely used to assess the environmental effect of cooling towers in many industrial fields such as steam power plants and NPPs. Guo et. al. investigated impact of heat rejection and cooling tower height on plume dispersion using the SACTI model, for the purpose of the future construction of inland NPPs. They found that increasing cooling tower height decreases the plume length and height frequencies. Their simulation results showed that the increase in heat rejection increases the plum radius frequency. The APR1400DC is an advanced light water reactor developed for the purpose of NRC-DC (design certification). The cooling towers for APR1400DC UHS consist of two linear mechanical draft cooling towers (LMDCTs). The LMDCT for APR1400DC UHS is conceptually designed because the plant site has not been decided yet. In the present study, the dependency of plume dispersion on the number of cooling towers is investigated using SACTI-2-beta, for predicting annual environmental effect of APR

  8. Effectiveness of External Reactor Vessel Cooling (ERVC) strategy for APR1400 and issues of phenomenological uncertainties

    International Nuclear Information System (INIS)

    Oh, S.J.; Kim, H.T.

    2007-01-01

    The APR1400(Advanced Power Reactor 1400) is an evolutionary advanced light water reactor with rated thermal power of 4000 MWt. For APR1400, External Reactor Vessel Cooling (ERVC) is adopted as a primary severe accident management strategy for in-vessel retention (IVR) of corium. The ERVC is a method of IVR by submerging the reactor vessel exterior. At the early stage of the APR1400 design, only ex-vessel cooling, cooling of the core melt outside the vessel after vessel is breached, is considered based on the EPRI Utility Requirement Document for Evolutionary LWR. However, based on the progress in implementation of Severe Accident Management Guidance (SAMG) for operating plants, as well as the research findings related to ERVC, ERVC strategy is adopted as a part of key severe accident management strategies. To improve its success, the strategy is reviewed and we implemented necessary design arrangement to increase its usefulness in managing the severe accident. In this paper, we examine the evolution of ERVC concept and its implementation in APR1400. Then, we review possible approach, including Risk-Oriented Accident Analysis Methodology (ROAAM), to evaluate the effectiveness of the strategy. (authors)

  9. 897.pdf | apr102004 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; apr102004; 897.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  10. Physical properties of beryllium oxide - Irradiation effects; Proprietes physiques et caracteristiques mecaniques de l'oxyde de beryllium fritte - Effet de l'irradiation et guerison

    Energy Technology Data Exchange (ETDEWEB)

    Elston, J; Caillat, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    This work has been carried out in view of determining several physical properties of hot-pressed beryllium oxide under various conditions and the change of these properties after irradiation. Special attention has been paid on to the measurement of the thermal conductivity coefficient and thermal diffusivity coefficient. Several designs for the measurement of the thermal conductivity coefficient have been achieved. They permit its determination between 50 and 300 deg. C, between 400 and 800 deg. C. Some measurements have been made above 1000 deg. C. In order to measure the thermal diffusivity coefficient, we heat a perfectly flat surface of a sample in such a way that the heat flux is modulated (amplitude and frequency being adjustable). The thermal diffusivity coefficient is deduced from the variations of temperature observed on several spots. Tensile strength; compressive strength; expansion coefficient; sound velocity and crystal parameters have been also measured. Some of the measurements have been carried out after neutron irradiation. Some data have been obtained on the change of the properties of beryllium oxide depending on the integrated neutron flux. (author)Fren. [French] L'objet de cette etude est la determination de plusieurs proprietes physiques de l'oxyde de beryllium fritte sous charge dans differentes conditions et l'evolution de ces proprietes apres irradiation. Une attention particuliere a ete portee sur la mesure de la conductibilite et de la diffusivite thermiques. Differents montages ont ete realises pour mesurer la conductibilite thermique. Ils permettent la determination entre 50 et 300 deg. C, entre 400 et 800 deg. C; quelques mesures ont ete faites au-dessus de 1000 deg. C. Pour la mesure du coefficient de diffusivite thermique, on realise une attaque thermique, de frequence et d'amplitude reglables d'une face parfaitement plane d'un echantillon d'oxyde de beryllium. Les variations de temperature sont ovees en plusieurs points, on en

  11. Implementasi Automatic Packet Reporting System (APRS Untuk Paket Data Pemantauan dan PengukuranUntuk Paket Data Pemantauan dan Pengukuran

    Directory of Open Access Journals (Sweden)

    Arief Goeritno

    2016-03-01

    Full Text Available Telah dilakukan implementasi Automatic Packet Reporting System (APRS untuk paket data pemantauan dan pengukuran melalui tujuan penelitian, berupa: a penyetelan program aplikasi pada jaringan APRS dan b pengukuran terhadap penerimaan data berdasarkan kinerja sensor-sensor. Penyetelan program aplikasi APRS merupakan konfigurasi perangkat lunak untuk APRS yang akan digunakan pada stasiun penerimaan data APRS dengan program aplikasi yang biasa digunakan, yaitu hyperterminal dan UI-View 32. Pengukuran penerimaan data berdasarkan kinerja sensor yang dilakukan melalui proses perekaman pada stasiun penerimaan data APRS. Kinerja sensor-sensor akan diamati pada stasiun pengiriman dan data hasil pengamatan akan dapat diterima pada stasiun penerimaan secara real time. Program aplikasi berbasis hyperterminal dan UI View 32 telah berhasil melakukan proses handshaking antara Terminal Node Controller (TNC dan komputer, sehingga data telemetri dari stasiun pengiriman paket data dapat diterima di stasiun penerimaan. Data telemetri dapat diamati pada stasiun penerimaan dan dapat diperoleh secara real time dengan format: YB0LRB-11>BEACON,WIDE2-1 [05/18/2014 04:03:49]: : T#010,008,093,004,122,075. Notifikasi YB0LRB-11 merupakan stasiun pengiriman paket data telemetri, kemudian data tersebut akan diterima pada stasiun penerima YD1PRY dengan format: YD1PRY-2>APLPN,ARISS [05/18/2014 04:03:07]: : !06.30.37S/106.48.26E#. Notifikasi tersebut merupakan pengiriman informasi data posisi oleh stasiun YD1PRY untuk inisialisasi pada jaringan APRS. Stasiun YB0LRB-11 ketika mengirim paket data telemetri dengan format: YB0LRB-11>BEACON,WIDE2-1 [05/18/2014 04:00:49]: : T#001,004,035,005,122,075. Paket data dari stasiun YB0LRB yang dipancar ulang atau digipeater dengan format: YB0LRB-11>BEACON,YD1PRY-2,WIDE2* [05/18/2014 04:00:50]: : T#001,004,035,005,122,075. Sensor pengukuran berkinerja relatif stabil, walaupun terdapat nilai simpangan pengukuran sebesar 1 cm atau

  12. 75 FR 44847 - Proposed Collection; Comment Request for Forms 943, 943-PR, 943-A, and 943A-PR

    Science.gov (United States)

    2010-07-29

    ... 943, 943-PR, 943- A, and 943A-PR AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and... comments concerning Forms 943, Employer's Annual Tax Return for Agricultural Employees, 943-PR, Planilla..., Agricultural Employer's Record of Federal Tax Liability, and 943A-PR, Registro De La Obligacion Contributiva...

  13. In vivo dosimetry study of semi-conductors EPD-20 in total body irradiation technique; Etude de la dosimetrie in vivo par semi-conducteurs EPD-20 dans les conditions de l'irradiation corporelle totale

    Energy Technology Data Exchange (ETDEWEB)

    Besbes, M.; Kochbati, L.; Ben Abdennabi, A.; Abdessaied, S.; Salem, L.; Frikha, H.; Nasr Ben Ammar, C.; Hentati, D.; Gargouri, W.; Messai, T.; Benna, F.; Maalej, M. [Institut Salah-Azaiz, Service de radiotherapie oncologique, Tunis (Tunisia); Mahjoubi, H. [Institut superieur des technologies medicales de Tunis, Dept. de biophysique, Tunis (Tunisia); Farhat, L. [CHU Habib-Bourguiba, Service de radiotherapie oncologique, Sfax (Tunisia)

    2010-01-15

    Purpose: The objective of this work was the study of in vivo dosimetry performed in a series of 54 patients receiving total body irradiation (T.B.I.) at the Salah-Azaiz Institute of Tunis since 2004. In vivo dosimetry measurements were compared to analytically calculated doses from monitor units delivered. Patients and method: The irradiation was conducted by a linear accelerator (Clinac 1800, Varian, Palo Alto, USA) using nominal X-rays energies of 6 MV and 18 MV, depending on the thickness of the patient at the abdomen. The dose was measured by semi-conductors p-type E.P.D.-20. These diodes were calibrated in advance with an ionization chamber 'P.T.W. Farmer' type of 0.6 cm{sup 3} and were placed on the surface of plexiglas phantom in the same T.B.I. conditions. A study of dosimetric characteristics of semi-conductors E.P.D.-20 was carried out as a function of beam direction and temperature. Afterwards, we conducted a comparative analysis of doses measured using these detectors during irradiation to those calculated retrospectively from monitor units delivered to each patient conditioned by T.B.I.. Results: Experience showed that semi-conductors are sensitive to the angle of beam radiation (0-90 degrees) and the temperature (22-40 Celsius degrees). The maximum variation is respectively 5 and 7%, but in our irradiation conditions these correction factors are less than 1%. The analysis of the results of the in vivo dosimetry had shown that the ratio of the average measured doses and analytically calculated doses at the abdomen, mediastinum, right lung and head are 1.005, 1.007, 1.0135 and 1.008 with a standard deviation 'type A' respectively of 3.04, 2.37, 7.09 et 4.15%. Conclusion: In vivo dosimetry by semi-conductors is in perfect agreement with dosimetry by calculation. However, in vivo dosimetry using semiconductors is the only technique that can reflect the dose actually received instantly by the patient during T.B.I. given the many factors

  14. Numerical Analysis of Molten Corium Dispersion during Hypothetical High-Pressure Accidents in APR1400 Nuclear Power Plant

    International Nuclear Information System (INIS)

    Kim, Jong Tae; Ha, Kwang Soon; Kim, Sang Baik; Kim, Hee Dong; Jeong, Jae Sik

    2010-01-01

    During a hypothetical high-pressure accident in a nuclear power plant (NPP), molten corium can be ejected through a breach of a reactor pressure vessel (RPV) and dispersed by the following jet of a high pressure steam in the RPV. The dispersed corium is fragmented into smaller droplets in a reactor cavity of the NPP by the steam jet with very high velocity and is released into the upper compartment of the NPP by an overpressure in the cavity. The heat-carrying fragments of the corium transfer the thermal energy to the ambient air in the containment and react chemically with steam and generate hydrogen which may be burnt in the containment. The thermal loads from the ejected molten corium on the containment which is called direct containment heating (DCH) can threaten the integrity of the containment. New generation NPPs such as APR1400 and EPR have been designed in consideration of reducing the possibility of the containment failure from the DCH. In order for that, APR1400 has a convolute-type corium chamber connected to the reactor cavity. In the case of EPR, severe-accident dedicated depressurization valves are installed to preclude a high pressure melt ejection (HPME). DCH in a NPP containment is related to many physical phenomena such as multi-phase hydrodynamics, thermodynamics and chemical reaction. In the evaluation of the DCH load, the melt dispersion rates depending on the RPV pressure are the most important parameter. Mostly, DCH was evaluated by using lumped-analysis codes with some correlations obtained from experiments for the dispersion rates. The corium dispersion rates for many types of the NPP containments had been obtained by experiments in 90s. And some correlations from the experimental data were developed. As mentioned above, APR1400 has a corium chamber to reduce the corium dispersion rate. But there is no experimental data for the dispersion rate specific to the APR1400 cavity geometry. So its performance for capturing of the dispersed corium

  15. 78 FR 47051 - Proposed Collection; Comment Request for Forms 943, 943-PR, 943-A, and 943A-PR

    Science.gov (United States)

    2013-08-02

    ... 943, 943-PR, 943- A, and 943A-PR AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and..., 943-PR, Planilla Para La Declarcion Anual De La Contribucion Federal Del Patrono De Empleados Agricolas, 943-A, Agricultural Employer's Record of Federal Tax Liability, and 943A-PR, Registro De La...

  16. An Experimental Investigation on APR1400 Penetration Weld Failure by Metallic Melt

    International Nuclear Information System (INIS)

    An, Sang Mo; Ha, Kwang Soon; Kim, Hwan Yeol

    2014-01-01

    The penetrations are considered as the most vulnerable parts with respect to the reactor vessel failure when a core melt severe accident occurs and the corium reaches the lower head. Penetration tube failure modes can be divided into two categories; tube ejection out of the vessel lower head and rupture of the penetration tube outside the vessel. Tube ejection begins with degrading the penetration tube weld strength to zero as the weld is exposed to temperatures as high as the weld melting temperature, which is called weld failure, and then overcoming any binding force in the hole in the vessel wall that results from differential thermal expansion of the tube and vessel wall. Tube rupture assumes that the debris bed has melted the instrument tube inside the reactor and melt migrates down into the tube to a location outside the vessel wall where a pressure rupture can occur, thus breaching the pressure boundary. In the present paper, we have a focus on the tube ejection failure mode, specifically on the APR1400 weld failure by direct contact with a metallic melt. The objective is to investigate experimentally the ablation kinetics of an APR1400 penetration weld during the interactions with a metallic melt and to suggest the modification of the existing weld failure model. This paper involves the interaction experiments of two different metallic melts (metallic corium and stainless steel melts) with a weld specimen, and rough estimation of weld failure time. The interaction experiments between the metallic melts and an APR1400 penetration weld were performed to investigate the ablation kinetics of the penetration weld. Metallic corium and stainless steel melts were generated using an induction heating technique and interacted with a penetration weld specimen. The ablation rate of the weld specimen showed a range from 0.109 to 0..244 mm/s and thus the APR1400 penetration weld was estimated to be failed at hundreds of times after the interaction with the melt

  17. Development of a Test Facility to Simulate the Reactor Flow Distribution of APR+

    International Nuclear Information System (INIS)

    Euh, D. J.; Cho, S.; Youn, Y. J.; Kim, J. T.; Kang, H. S.; Kwon, T. S.

    2011-01-01

    Recently a design of new reactor, APR+, is being developed, as an advanced type of APR1400. In order to analyze the thermal margin and hydraulic characteristics of APR+, quantification tests for flow and pressure distribution with a conservation of flow geometry are necessary. Hetsroni (1967) proposed four principal parameters for a hydraulic model representing a nuclear reactor prototype: geometry, relative roughness, Reynolds number, and Euler number. He concluded that the Euler number should be similar in the prototype and model under the preservation of the aspect ratio on the flow path. The effect of the Reynolds number at its higher values on the Euler number is rather small, since the dependency of the form and frictional loss coefficients on the Reynolds number is seen to be small. ABB-CE has carried out several reactor flow model test programs, mostly for its prototype reactors. A series of tests were conducted using a 3/16 scale reactor model. (see Lee et al., 2001). Lee et al (1991) performed experimental studies using a 1/5.03 scale reactor flow model of Yonggwang nuclear units 3 and 4. They showed that the measured data met the acceptance criteria and were suitable for their intended use in terms of performance and safety analyses. The design of current test facility was based on the conservation of Euler number which is a ratio of pressure drop to dynamic pressure with a sufficiently turbulent region having a high Reynolds number. By referring to the previous study, the APR+ design is linearly reduced to 1/5 ratio with a 1/2 of the velocity scale, which yields a 1/39.7 of Reynolds number scaling ratio. In the present study, the design feature of the facilities, named 'ACOP', in order to investigate flow and pressure distribution are described

  18. Critical heat flux for APR1400 lower head vessel during a severe accident

    International Nuclear Information System (INIS)

    Noh, Sang W.; Suh, Kune Y.

    2013-01-01

    Highlights: ► Studied boiling on downward-facing hemispherical vessel with asymmetric thermal insulator. ► Scaled the APR1400 lower head linearly down by 1/10 including ICI tubes and shear keys. ► Performed thermal analysis using ANSYS V11.0 to determine the internal temperature and heat flux. ► Performed tests to obtain the CHF with saturated demineralized water at atmospheric pressure. ► Measured CHF accounting for 3D random flow effect expected in the APR1400 application. -- Abstract: Corium Ablation Stopper Apparatus (CASA) has a downward-facing hemispherical vessel and geometrically asymmetric thermal insulator of the Advanced Power Reactor 1400 MWe (APR1400) scaled linearly down by 1/10, as well as sixty-one in-core instrumentation (ICI) tubes and four shear keys. The heated vessel plays a pivotal role in CASA depending on the configuration of the oxide pool and metal layer to bring about the focusing effect expected of a molten pool in the lower head during a severe accident. The heated vessel was designed through a trial-and-error method and thermal analysis. Thermal analysis was performed using ANSYS V11.0 to investigate the effect of the internal temperature and heat flux on the integral hemispherical copper vessel. The CASA tests were carried out to obtain the critical heat flux (CHF) with saturated and demineralized water at the atmospheric pressure (0.1 MPa). The CHF in the metal layer through the hemispherical channel was found to be lower than that in the ULPU-2400 configuration V data through the streamlined thermal insulator. The experimental CHF was measured and obtained through the CASA hemispherical heated surface accounting for the three-dimensional random flow effect expected in the APR1400 application

  19. Pagure {sup 60}Co panoramic irradiation facility; Pagure irradiateur panoramique au {sup 60}Co

    Energy Technology Data Exchange (ETDEWEB)

    Puig, J R; Laizier, J; Lorin, M; Laroche, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    After a description of the various parts of 'PAGURE', a 10 KCi panoramic irradiation facility, and of the operations data, a critic scrutiny is given. From the experience of five years operations, working of the facility can be thought of very satisfying. From the point of view of standardization of irradiation facilities, PAGURE can be taken, in its range, as a standard design. (authors) [French] Apres avoir decrit les differents elements constitutifs de 1'irradiateur panoramique de 10 KCi 'PAGURE' et precise les donnees d'exploitation, on en fait l'examen critique. A la lumiere de cinq annees d'utilisation, le fonctionnement de 1'irradiateur apparait extremement satisfaisant. Dans une perspective de standardisation des appareils, on peut, dans sa gamme, le considerer comme une realisation type. (auteurs)

  20. Irradiation tests on bitumen and bitumen coated materials; Essais d'irradiation de bitume et d'enrobes bitumineux

    Energy Technology Data Exchange (ETDEWEB)

    Tabardel-Brian, R.; Rodier, J.; Lefillatre, G. [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    The use of bitumen as a material for coating high-activity products calls for prior study of the resistance of bitumen to irradiation. After giving briefly the methods of preparation of bitumen- coated products, this report lists the equipment which has been used for carrying out the {beta} and {gamma} irradiations of these products, and gives the analytical results obtained as a function of the dose rates chosen and of the total integrated dose. Finally, some conclusions have been drawn concerning the best types of bitumen. It should be stressed that some bitumens apparently underwent no degradation whatsoever nor any volume increase, for a total integrated dose of 1.8 x 10{sup 10} rads. (authors) [French] Dans le cadre de l'enrobage par le bitume des produits de haute activite, il est necessaire de verifier au prealable, la tenue du bitume a l'irradiation. Apres un bref rappel de la preparation des enrobes bitumineux, le present rapport regroupe les moyens qui ont ete mis en oeuvre, pour effectuer leurs irradiations sous rayonnement {beta} et sous rayonnement {gamma}, ainsi que les resultats des analyses qui ont ete faites en fonction des debits de doses choisis et de la dose totale integree. Enfin, des conclusions ont ete tirees sur les types de bitume a retenir. On peut souligner que certains bitumes n'ont subi aucune degradation apparente ni augmentation de volume pour une dose totale integree de 1.8 x 10{sup 10} rads. (auteurs)

  1. Vibration Analysis for Steam Dryer of APR1400 Steam Generator

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sung-heum; Ko, Doyoung [KHNP CRI, Daejeon (Korea, Republic of); Cho, Minki [Doosan Heavy Industry, Changwon (Korea, Republic of)

    2016-10-15

    This paper is related to comprehensive vibration assessment program for APR1400 steam generator internals. According to U.S. Nuclear Regulatory Commission, Regulatory Guide 1.20 (Rev.3, March 2007), we conducted vibration analysis for a steam dryer as the second steam separator of steam generator internals. The vibration analysis was performed at the 100 % power operating condition as the normal operation condition. The random hydraulic loads were calculated by the computational fluid dynamics and the structural responses were predicted by power spectral density analysis for the probabilistic method. In order to meet the recently revised U.S. NRC RG 1.20 Rev.3, the CVAP against the potential adverse flow effects in APR1400 SG internals should be performed. This study conducted the vibration response analysis for the SG steam dryer as the second moisture separator at the 100% power condition, and evaluated the structural integrity. The predicted alternating stress intensities were evaluated to have more than 17.78 times fatigue margin compared to the endurance limit.

  2. GPM GROUND VALIDATION AIRBORNE SECOND GENERATION PRECIPITATION RADAR (APR-2) GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The GPM Ground Validation Airborne Second Generation Precipitation Radar (APR-2) GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment...

  3. 1001.pdf | 25apr2010 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    2010-04-25

    Apr 25, 2010 ... error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018. Dates Extended To 7 December 2017. Register here · Focus Area Science ...

  4. Improved Design of Crew Operation in Computerized Procedure System of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Seong, No Kyu; Jung, Yeon Sub; Sung, Chan Ho [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    The operators perform the paper-based procedures in analog-based conventional main control room (MCR) depending on only communications between operators except a procedure controller such as a Shift Supervisor (SS), however in digital-based MCR the operators can confirm the procedures simultaneously in own console when the procedure controller of computerized procedure (CP) opens the CP. The synchronization and a synchronization function between procedure controller and other operators has to be considered to support the function of crew operation. This paper suggests the improved design of crew operation in computerized procedure system of APR1400. This paper suggests the improved design of APR1400 CPS. These improvements can help operators perform the crew procedures more efficiently. And they reduce a burden of communication and misunderstanding of computerized procedures. These improvements can be applied to CPS after human factors engineering verification and validation.

  5. Greta Kaits 9. apr. 1928 - 29. aug. 1946 : [luuletused] / Mats Traat

    Index Scriptorium Estoniae

    Traat, Mats, 1936-

    2008-01-01

    Sisu : Greta Kaits 9. apr. 1928 - 29. aug. 1946 ; Villem Hänilane 1898 - 1952 ; Peeter Pedak 1897 - 1953 ; Max Äidse 1903 - 1959 ; Lavinia Laidam ; Buchard Pruus ; Sergei Krivokopõtov ; Allan Luht 5. VII 1962 - 17. V 2007 ; Karl Saarmets 9. III 1924 - 14. IX 1981 ; Raimo Ritsik

  6. Les pertes après récolte en Afrique : examen analytique et synthèse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Partout en Afrique, les pertes après récolte le long de la chaîne alimentaire, de la ferme à la table, mettent en péril la sécurité alimentaire des agriculteurs dépourvus de ressources. La réduction des pertes après récolte peut aider à accroître la disponibilité, la qualité nutritionnelle et la salubrité des aliments, et à améliorer ...

  7. Main steam line break accident simulation of APR1400 using the model of ATLAS facility

    Science.gov (United States)

    Ekariansyah, A. S.; Deswandri; Sunaryo, Geni R.

    2018-02-01

    A main steam line break simulation for APR1400 as an advanced design of PWR has been performed using the RELAP5 code. The simulation was conducted in a model of thermal-hydraulic test facility called as ATLAS, which represents a scaled down facility of the APR1400 design. The main steam line break event is described in a open-access safety report document, in which initial conditions and assumptionsfor the analysis were utilized in performing the simulation and analysis of the selected parameter. The objective of this work was to conduct a benchmark activities by comparing the simulation results of the CESEC-III code as a conservative approach code with the results of RELAP5 as a best-estimate code. Based on the simulation results, a general similarity in the behavior of selected parameters was observed between the two codes. However the degree of accuracy still needs further research an analysis by comparing with the other best-estimate code. Uncertainties arising from the ATLAS model should be minimized by taking into account much more specific data in developing the APR1400 model.

  8. GPM GROUND VALIDATION AIRBORNE SECOND GENERATION PRECIPITATION RADAR (APR-2) GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Second Generation Airborne Precipitation Radar (APR-2) is a dual-frequency (13 GHz and 35 GHz), Doppler, dual-polarization radar system. It has a downward...

  9. The Gravity Makeup on the LORHR Event during Mid-loop Operation for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Woo; Lee, Yong Hee; Lee, Gyu Cheon; Kim, Shin Whan [KEPCO, Daejeon (Korea, Republic of)

    2015-05-15

    This paper is to investigate means of the available gravity makeup after the event to prevent or sustain the core uncovery and fuel failure for the typical advanced power reactor nuclear power plants (APR1400). Unlike the OPR1000 (optimized power reactor 1000 nuclear power plants), the refueling water storage tank of APR1400 cannot be used for gravity makeup since it is located on the bottom of the containment with a lower elevation than the reactor vessel. So, the other means of gravity makeup and their effect on the core uncovery are accounted. The use of the water used for the cask loading pit (CLP) during refueling or the safety injection line filling tank (SIFT), which are not designed for gravity makeup during the event, and safety injection tanks (SITs) are considered as the alternative source of makeup feed. The results show that gravity makeup of a SIT provides a sufficient operator action time for the LORHR with the station black out (SBO) during the mid-loop operation for the APR1400. From the LORHR event analysis, the effective means of gravity makeup for APR1400 to cope with this event concurrent loss of all AC power is determined as the gravity feed using SITs. Other means for gravity makeup using CLP or SIFT, which are not designed to mitigate the LORHR event, are evaluated as not effective to the event due to the large flow resistances and the low elevation head to overcome the system pressure increase during the LORHR. The use of one SIT and two SITs for the LORHR provides the core uncovery times as 3 hr 8 min and 4 hr 32 min extending 1 hr 15 min and 2 hr 38 min from the base case, respectively.

  10. MELCOR code modeling for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young; Park, S. Y.; Kim, D. H.; Ahn, K. I.; Song, Y. M.; Kim, S. D.; Park, J. H

    2001-11-01

    The severe accident phenomena of nuclear power plant have large uncertainties. For the retention of the containment integrity and improvement of nuclear reactor safety against severe accident, it is essential to understand severe accident phenomena and be able to access the accident progression accurately using computer code. Furthermore, it is important to attain a capability for developing technique and assessment tools for an advanced nuclear reactor design as well as for the severe accident prevention and mitigation. The objective of this report is to establish technical bases for an application of the MELCOR code to the Korean Next Generation Reactor (APR1400) by modeling the plant and analyzing plant steady state. This report shows the data and the input preparation for MELCOR code as well as state-state assessment results using MELCOR code.

  11. An investigation of major influences on the seismic response of APR1400 reactor vessel internals - 15145

    International Nuclear Information System (INIS)

    Byun, Y.J.; Kim, J.G.; Sung, K.K.; Lee, D.H.

    2015-01-01

    This paper deals with 3 topics concerning the APR1400 reactor vessel internals (RVI) seismic analysis: nonlinear problems, approaches to account for uncertainties of seismic model, and dynamic responses to various seismic excitations. First, the noticeable nonlinear characteristics of the RVI seismic model are discussed, and the modeling methods for properly simulating the nonlinear behaviors of RVI under seismic loads are presented. By applying these methods to the seismic model, the seismic analysis can correctly predict the dynamic response of RVI. Next, two approaches to account for the uncertainties of seismic model are evaluated: the time history broadening method, and the sensitivity analysis based on NUREG-0800, Section 4.2, Appendix A. From the evaluation results, it is confirmed that the time history broadening method employed in the seismic analysis of APR1400 RVI sufficiently accounts for the uncertainty of seismic model. Finally, the response characteristics of APR1400 RVI to various seismic excitations are investigated. The seismic excitations corresponding to various soil profiles, including the effects of cracked and un-cracked concrete stiffness on the reactor containment building structure, are used as forcing functions. From this study, the effects of various site conditions on the dynamic response of APR1400 RVI are identified. As a result, the enveloped seismic responses obtained from this study will contribute to the development of RVI seismic design that covers a wide range of potential site conditions. (authors)

  12. 967.pdf | 10apr2010 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    2010-04-10

    Apr 10, 2010 ... error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held from 29–30 June 2018 ...

  13. Phylogenetic Diversity of aprA Genes in Subseafloor Sediments on the Northwestern Pacific Margin off Japan.

    Science.gov (United States)

    Aoki, Masataka; Kakiuchi, Ryota; Yamaguchi, Takashi; Takai, Ken; Inagaki, Fumio; Imachi, Hiroyuki

    2015-01-01

    Markedly diverse sequences of the adenosine-5'-phosphosulfate reductase alpha subunit gene (aprA), which encodes a key enzyme in microbial sulfate reduction and sulfur oxidation, were detected in subseafloor sediments on the northwestern Pacific off Japan. The aprA gene sequences were grouped into 135 operational taxonomic units (90% sequence identity), including genes related to putative sulfur-oxidizing bacteria predominantly detected in sulfate-depleted deep sediments. Our results suggest that microbial ecosystems in the subseafloor biosphere have phylogenetically diverse genetic potentials to mediate cryptic sulfur cycles in sediments, even where sulfate is rarely present.

  14. Après le spectacle : les impacts psychosociaux de consommation de pornographie homosexuelle masculine chez les hommes gais

    Directory of Open Access Journals (Sweden)

    SIMON CORNEAU

    2010-01-01

    Full Text Available Cette recherche qualitative exploratoire vise à mettre à jour les impacts psychosociaux possibles de consommation de pornographie homosexuelle masculine à travers les discours de 20 usagers gais de Toronto (Canada. La consommation de pornographie semble plus acceptée et normalisée chez les hommes gais que chez les hommes hétérosexuels. Une telle consommation peut avoir une incidence sur certains aspects de la santé sexuelle et de la santé mentale. L'analyse thématique du corpus de nos données nous révèle que les impacts peuvent se faire sentir au niveau de l'apprentissage, de l'édification de la fantasmatique, de la validation de la sexualité entre hommes, de l'ingérence dans la vie sexuelle et enfin, sur l'habituation et sur l'image de soi/image corporelle. À l'aide de l’analyse critique de discours, nous avons pu documenter les discours sociaux plus larges en jeu dans les récits des usagers et voir de quelle façon ils se positionnent à l'intérieur de ces mêmes discours.

  15. Application of Nuclear Application Programs to APR1400 Simulator

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Myeong Soo; Hong, Jin Hyuk

    2012-01-01

    Advanced Power Reactor 1400MWe (APR1400) simulator has been developed and installed at Kori Training Center for operators of ShinKori no.3, 4 nuclear power plant by Korea Hydro and Nuclear Power,s Central Research Institute (KHNP CRI). NAPS (Nuclear Application Programs) is a computerbased system which provides operators with past and real-time information for monitoring and controlling NSSS (Nuclear Steam Supply System), BOP (Balance Of Plant) and Electric system. NAPS consists of several programs such as COLSS (Core Operating Limit Supervisory System), SPADES+ (Safety Parameter Display and Evaluation System), CEA (Control Element Assembly) Application Program, and so on. Each program makes calculations based on its own algorithm and provides information available for operation. In order to use NAPS programs with a simulator even though they are being used in a real plant, they should be modified to add several simulation functions such as reset, snap, run/freeze and backtrack required by ANSI/ANS-3.5 to the original NAPS functionality. On top of that, interfacing programs should be developed for the data communication between respective NAPS programs and simulator sever. The purpose of this paper is to provide the overall architecture of the communication system between NAPS and simulator model, and to describe the method to apply NAPS to APR1400 simulator

  16. Cold-Leg Small Break LOCA Analysis of APR1400 Plant Using a SPACE/sEM Code

    International Nuclear Information System (INIS)

    Lim, Sang Gyu; Lee, Suk Ho; Yu, Keuk Jong; Kim, Han Gon; Lee, Jae Yong

    2013-01-01

    The Small Break Loss-of-Coolant Accident (SBLOCA) evaluation methodology (EM) for APR1400, called sEM, is now being developed using SPACE code. SPACE/sEM is to set up a conservative evaluation methodology in accordance with appendix K of 10 CFR 50. Major required and acceptable features of the evaluation models are described as below. - Fission product decay : 1.2 times of ANS97 decay curve - Critical flow model : Henry-Fauske Moody two phase critical flow model - Metal-Water reaction model : Baker-Just equation - Critical Heat Flux (CHF) : B and W, Barnett and Modified Barnett correlation - Post-CHF : Groeneveld 5.7 film boiling correlation A series of test matrix is established to validate SPACE/sEM code in terms of major SBLOCA phenomena, e.g. core level swelling and boiling, core heat transfer, critical flow, loop seal clearance and their integrated effects. The separated effect tests (SETs) and integrated effect tests (IETs) are successfully performed and these results shows that SPACE/sEM code has a conservatism comparing with experimental data. Finally, plant calculations of SBLOCA for APR1400 are conducted as described below. - Break location sensitivity : DVI line, hot-leg, cold-leg, pump suction leg. - Break size spectrum : 0.4ft 2 ∼0.02ft 2 (DVI) 0.5ft 2 ∼0.02ft 2 (hot-leg, cold-leg, pump suction leg) This paper deals with break size spectrum analysis of cold-leg break accidents. Based on the calculation results, emergency core cooling system (ECCS) performances of APR1400 and typical SBLOCA phenomena can be evaluated. Cold-leg SBLOCA analysis for APR1400 is performed using SPACE/sEM code under harsh environment condition. SPACE/sEM code shows the typical SBLOCA behaviors and it is reasonably predicted. Although SPACE/sEM code has conservative models and correlations based on appendix K of 10 CFR 50, PCT does not exceed the requirement (1477 K). It is concluded that ECCS in APR1400 has a sufficient performance in cold-leg SBLOCA

  17. Cold-Leg Small Break LOCA Analysis of APR1400 Plant Using a SPACE/sEM Code

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Sang Gyu; Lee, Suk Ho; Yu, Keuk Jong; Kim, Han Gon; Lee, Jae Yong [Central Research Institute, KHNP, Ltd., Daejeon (Korea, Republic of)

    2013-10-15

    The Small Break Loss-of-Coolant Accident (SBLOCA) evaluation methodology (EM) for APR1400, called sEM, is now being developed using SPACE code. SPACE/sEM is to set up a conservative evaluation methodology in accordance with appendix K of 10 CFR 50. Major required and acceptable features of the evaluation models are described as below. - Fission product decay : 1.2 times of ANS97 decay curve - Critical flow model : Henry-Fauske Moody two phase critical flow model - Metal-Water reaction model : Baker-Just equation - Critical Heat Flux (CHF) : B and W, Barnett and Modified Barnett correlation - Post-CHF : Groeneveld 5.7 film boiling correlation A series of test matrix is established to validate SPACE/sEM code in terms of major SBLOCA phenomena, e.g. core level swelling and boiling, core heat transfer, critical flow, loop seal clearance and their integrated effects. The separated effect tests (SETs) and integrated effect tests (IETs) are successfully performed and these results shows that SPACE/sEM code has a conservatism comparing with experimental data. Finally, plant calculations of SBLOCA for APR1400 are conducted as described below. - Break location sensitivity : DVI line, hot-leg, cold-leg, pump suction leg. - Break size spectrum : 0.4ft{sup 2}∼0.02ft{sup 2}(DVI) 0.5ft{sup 2}∼0.02ft{sup 2}(hot-leg, cold-leg, pump suction leg) This paper deals with break size spectrum analysis of cold-leg break accidents. Based on the calculation results, emergency core cooling system (ECCS) performances of APR1400 and typical SBLOCA phenomena can be evaluated. Cold-leg SBLOCA analysis for APR1400 is performed using SPACE/sEM code under harsh environment condition. SPACE/sEM code shows the typical SBLOCA behaviors and it is reasonably predicted. Although SPACE/sEM code has conservative models and correlations based on appendix K of 10 CFR 50, PCT does not exceed the requirement (1477 K). It is concluded that ECCS in APR1400 has a sufficient performance in cold-leg SBLOCA.

  18. Some physical methods for study of irradiation effects in graphite; Quelques procedes physiques pour etudier les effets de l'irradiation du graphite

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, G; Lecomte, M; Mattmuller, R [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    A calibration method for a classical apparatus for differential thermal analysis is described in detail. This method achieves a relative precision of 5 per cent in the measurement of the internal energy release accompanying the annealing of irradiated graphites. Elastic constants of graphites are obtained from the frequencies of the longitudinal modes of vibration; procedures for excitation and detection of these vibrations at any temperature between -190 deg. C and +1500 deg. C are described. A procedure for obtaining easily measured deformations of graphites after relatively little irradiation with thermal neutrons is discussed. An application of this method to the study of the thermal annealing of elongation caused by displaced atoms is indicated. (author) [French] On decrit en detail une methode d'etalonnage pour un appareil classique d'analyse thermique differentielle. Cette methode permet de mesurer avec une precision relative de 5% la liberation d'energie interne qui accompagne le 'recuit' des graphites irradies. On deduit les constantes elastiques des graphites des frequences des vibrations longitudinales et on decrit les procedes pour exciter et detecter ces vibrations a toutes les temperatures comprises entre -190 deg. C et + 1500 deg. C. On discute un procede pour obtenir une des deformations de graphites facilement mesurables apres une irradiation relativement faible a l'aide de neutrons thermiques. Une application de cette methode a l'etude du 'recuit' thermique de l'elongation causee par les atomes deplaces est indiquee. (auteur)

  19. Neuchatel ne gardera pas le Palais de l'equilibre apres Expo.02

    CERN Multimedia

    2002-01-01

    "La ville de Neuchatel ne souhaite pas conserver le Palais de l'equilibre apres Expo.02. Par 24 voix contre 7, le Conseil general a rejete le plan special du Conseil communal qui proposait de transformer l'edifice en un centre de congres" (1/2 page).

  20. Progress of Design Improvements for APR1400 Computerized Procedure System from HFE V and V results and Design Experience

    International Nuclear Information System (INIS)

    Lee, Sungjin; Seong, Nokyu

    2015-01-01

    This study shows major already improved design features from the above three processes and a design proposal for to-be-improving items. APR1400 CPS has been verified and validated by the HFE process, internal design review and site acceptance tests. APR1400 Computerized Procedure System (CPS) has been applied to Shin-Kori Nuclear Power Plant (SKN) 3 and 4 units, Shin-Hanul Nuclear Power Plant (SHN) 1 and 2 units and Baraka Nuclear Power Plant (BNPP) 1, 2, 3 and 4 units. Since APR1400 CPS is a first-of-a-kind (FOAK) human machine interface (HMI) for executing a computerized procedure in the nuclear power plant's main control room in South Korea, it has been continuously improved through a) the human factor engineering (HFE) verification and validation (V and V), b) the internal design review and c) prototype tests. Human engineering discrepancies (HEDs) can be identified by the HFE V and V activity. Some HEDs of APR1400 CPS for SKN 3 and 4 and SHN 1 and 2 have been adopted as a role of design improvement in the CPS system while others were regarded as an operator training requirement or part of task contents. Various requests for improving the CPS have been collected from those results. A HMI system should be improved continuously for removing potential defects. Some of introduced design features in this paper has been adopted for APR1400 nuclear power plants. Some of them are under the review in the CPS design team of KHNP

  1. Application of Standardized ITAAC to the APR1400 Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Deogji; Kim, Yunho [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained.

  2. Application of Standardized ITAAC to the APR1400 Design Certification

    International Nuclear Information System (INIS)

    Kang, Deogji; Kim, Yunho

    2016-01-01

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained

  3. Irradiation performance updates on Korean advanced fuels for PWRs

    International Nuclear Information System (INIS)

    Jang, Y.K.; Jeon, K.L.; Kim, Y.H.; Yoo, J.S.; Kim, J.I.; Shin, J.C.; Chung, J.G.; Park, J.R.; Chung, S.K.; Kim, T.W.; Yoon, Y.B.; Park, K.M.; Yoo, M.J.; Kim, M.S.; Lee, T.H.

    2010-01-01

    The developments of advanced nuclear fuels for PWRs were started in 1999 and in 2001, respectively: PLUS7 TM for eight operating optimized power reactors of 1000 MWe class (OPR1000) and four advanced power reactors of 1400 MWe class (APR1400) under construction, and 16ACE7 TM and 17ACE7 TM for an operating 16x16 Westinghouse type plant and six operating 17x17 Westinghouse type plants. The design targets were as follows: batch average burnup up to 55 GWD/MTU, over 10% thermal margin increase, improvement of the mechanical integrity of higher seismic capability, higher debris or grid fretting wear performance, higher control rod insertion capability, increase of neutron economy, improvement of manufacturability, solving incomplete rod insertion (IRI) issue and top nozzle screw failure issue, etc. in comparison of the existing nuclear fuels. The irradiation tests using each four LTAs (Lead Test Assemblies) during 3 cycles were completed in three Korean nuclear reactors until 2009. The eight irradiation performance items which are assembly growth, rod growth, grid width growth, assembly bow, rod bow, assembly twist, rod diameter and cladding oxidation were examined in pool-side after each cycle and evaluated. The irradiation tests could be continued by expecting the good performances for next cycle from the previous cycle. After 2 cycle irradiations, the region implementation could be started in 15 nuclear power plants. Even though the verifications using the LTAs were completed, each surveillance program was launched and the irradiation performance data were being updated during region implementation. In addition to pool-side examinations (PSEs) by assembly-wise during irradiation tests, six rod-wise performance items were also examined in pool-side using each LTA after discharge. All performance items met their design criteria as a result of the evaluation. Even though the interesting ones among the irradiation performance parameters were assembly and grid growths

  4. Efficacy of granisetron in the prevention of GIT problems in patients undergoing total body irradiation. Interet du granisetron dans la prevention des troubles digestifs lors des irradiations corporelles totales

    Energy Technology Data Exchange (ETDEWEB)

    Feuvret, L.; Jammet, P.; Campana, F.; Cosset, J.M.; Fourquet, A. (Institut Curie, 75 - Paris (France))

    1994-01-01

    From december 1991 to september 1992, 20 patients due to receive total body irradiation (TBI) prior to allogeneic or autologous bone marrow transplantation were given granisetron (Kytril) in order to prevent intestinal (nausea and vomiting) early intolerance, TBI regimen was delivered on a fractional basis of six fractions, over 3 days. Twelve grays were delivered with a lung protection decreasing the pulmonary dose to 9 Gy Granisetron (3 mg) was administered by a 5-min intravenous infusion, 1 h before TBI. Up to two further infusions were given if nausea or vomiting occurred. The pretreatment perfusion was sufficient to prevent nausea and vomiting in 10/20 patients, one additional post-treatment perfusion was necessary in 7/20 patients, and two in 1/20 patients. In 2/20 cases, nausea and vomiting persisted in spite of three perfusions. Excellent or good efficacy was noted in 15/20 patients and a minor (or no) efficacy in five. Granisetron appears to be superior to the conventional anti emetic schemes to prevent nausea and vomiting in patients receiving TBI for bone marrow transplantation. 15 Refs.

  5. The comparison between layout and design of APR1400 MCR and EPRI requirement

    International Nuclear Information System (INIS)

    Suharyo Widagdo; Darlis; Sigit Santoso; T J Suryono

    2013-01-01

    A good man-machine interface system is needed by a nuclear power reactor because of its complexity and high safety factor. The man-machine interface system is centralized in the main control room (MCR). All of monitoring and controlling activity to keep the installation operation safety can be done from this place. In order to increase its ability in monitoring and controlling a hard effort to raise the interface system to the highest possible level is done not only by using the latest computer technology and instrumentation system but also using Human Engineering, as well. The paper aims to compare the lay out and design the APR1400 MCR and the requirement from EPRI about main control room lay out and design as response of TMI-2 accident. We can see from the discussion that the design of the MCR of APR1400 have been applied the request of EPRI. (author)

  6. Effect of the design change of the LSSBP on core flow distribution of APR+ Reactor

    International Nuclear Information System (INIS)

    Kim, Kihwan; Euh, Dong-Jin; Choi, Hae-Seob; Kwon, Tae-Soon

    2014-01-01

    The uniform core inlet flow distribution of an Advanced Power Reactor Plus (APR+) is required to prevent the failure rate of the HIPER fuel assembly and improve the core thermal margin. KEPCO-E and C and KAERI proposed a design change of the Lower Support Structure Bottom Plate (LSSBP), since the core flow rates were intense near the outer region of the intact LSSBP in a previous study. In this study, an experiment was carried out to evaluate the effect of the design change of the LSSBP on the core flow distribution using the APR+ Core Flow and Pressure (ACOP) test facility. The results showed great improvement on the core flow distribution under a 4-pump balanced flow condition. Under the 4-pump balanced flow condition, fifteen tests were repeated using the ACOP test facility to verify the effect of the 50% blocked flow area at the outer region of the LSSBP on the core inlet flow distribution. The profiles of the core inlet mass flow rates were analyzed using ensemble averaged values, and compared with that of the intact LSSBP. The results showed great improvement for the overall core region. The change in design of the LSSBP is expected to improve the hydraulic performance of an APR+ reactor

  7. Extended Station Blackout Analyses of an APR1400 with MARS-KS

    International Nuclear Information System (INIS)

    Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong

    2016-01-01

    The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage

  8. Extended Station Blackout Analyses of an APR1400 with MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2016-10-15

    The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage.

  9. Evaluation of Ablation rate by the change of Sacrificial Material for PECS in EU-APR

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Kim, Yong Soo; Lee, Keun Sung

    2015-01-01

    EU-APR, modified and improved from its original design of APR1400, has been developed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. In EU-APR, Severe Accident Mitigation Systems are dedicated to providing an independent defense line from that of Engineered Safety Feature (ESF) and Diverse Safety Feature (DSF). They consist of Emergency Reactor Depressurization System (ERDS), Passive Ex-vessel corium retaining and Cooling System (PECS), Severe Accident Containment Spray System (SACSS), Hydrogen Mitigation System (HMS) and Containment Filtered Vent System (CFVS). The PECS, so called core catcher, was introduced to prevent the Molten Core Concrete Interaction (MCCI) after Reactor Vessel (RV) failure. The PECS has experienced a lot of changes from its original design. Recently, the most significant change was that as a SM, limestone concrete is installed on PECS's body wall instead of previous sacrificial material rich in Fe 2 O 3 . The main reason of this design change is to overcome the issue that the sacrificial material is ablated rather too fast when reacting with corium that contains a large fraction of Zr metal. Other changes in the geometry of PECS's wall and downcomer design are considered as minor ones. In this paper, the comparison of ablation rates between previous SM and limestone concrete is carried out using MAAP5 code with respective MCCI model according to the material. In this paper, major improvements of MAAP5 model for PECS in EU-APR are presented and the evaluation of ablation rate for the previous SM model and the new LC model is carried out by means of ablation depths with LBLOCA sequence. Two models have respective unique ablation process. The ablation of LC model proceeds at a constant rate regardless of water while the ablation of SM model proceeds at a faster rate before the arrival of cooling water for corium and SM mixture. The change of sacrificial material also

  10. The health physics of installations for decladding irradiated fuels or for handling radio-elements at Marcoule; La radioprotection des installations de degainage des combustibles irradies et des radio-elements a Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J; Guillermin, P; Mallet, P [Commissariat a l' Energie Atomique, Centre de Production de Plutonium de Marcoule, 30 - Chusclan (France)

    1966-07-01

    Radiation protection practices for handling reactor fuel elements are described. Elements of considerable specific radioactivity are handled under water. A study was made of water filtration and of ventilation in the building. The installations are divided up into zones depending on the radioactive risks, and the radiation level atmospheric contamination are the object of a systematic control at various points. A description is given of all aspects of health physics which have been encountered during six years: storage, transfer of radioactive material; decladding, rolling, waste disposal, specialized operations, installations in operation and at rest, and transport. In spite of the gradual increase in the activity of these installations, the total doses received by the personnel have hardly altered and the number of cases of physical contamination has diminished. (authors) [French] Dans ces installations, se manipulent sous l'eau des elements a radioactivite specifique considerable. La filtration de l'eau, la ventilation ont ete particulierement etudiees. L'ensemble a ete divise en lieux classes en fonction des risques radioactifs et des appareils controlent en permanence l'irradiation et la contamination atmospherique en certains points. Tous les aspects de la radioprotection resultant de six annees d'experience relatifs: au stockage, au deconteneurage, au degainage, au laminage, a l'evacuation des residus, aux travaux particuliers, installations en marche et a l'arret, et aux transports sont successivement decrits. Malgre l'accroissement progressif de l'activite de cet ensemble, les doses integrees par le personnel n'ont pratiquement pas augmente et le nombre des cas de contamination corporelle a diminue. (auteurs)

  11. The subtilisin-like protease AprV2 is required for virulence and uses a novel disulphide-tethered exosite to bind substrates.

    Directory of Open Access Journals (Sweden)

    Ruth M Kennan

    Full Text Available Many bacterial pathogens produce extracellular proteases that degrade the extracellular matrix of the host and therefore are involved in disease pathogenesis. Dichelobacter nodosus is the causative agent of ovine footrot, a highly contagious disease that is characterized by the separation of the hoof from the underlying tissue. D. nodosus secretes three subtilisin-like proteases whose analysis forms the basis of diagnostic tests that differentiate between virulent and benign strains and have been postulated to play a role in virulence. We have constructed protease mutants of D. nodosus; their analysis in a sheep virulence model revealed that one of these enzymes, AprV2, was required for virulence. These studies challenge the previous hypothesis that the elastase activity of AprV2 is important for disease progression, since aprV2 mutants were virulent when complemented with aprB2, which encodes a variant that has impaired elastase activity. We have determined the crystal structures of both AprV2 and AprB2 and characterized the biological activity of these enzymes. These data reveal that an unusual extended disulphide-tethered loop functions as an exosite, mediating effective enzyme-substrate interactions. The disulphide bond and Tyr92, which was located at the exposed end of the loop, were functionally important. Bioinformatic analyses suggested that other pathogenic bacteria may have proteases that utilize a similar mechanism. In conclusion, we have used an integrated multidisciplinary combination of bacterial genetics, whole animal virulence trials in the original host, biochemical studies, and comprehensive analysis of crystal structures to provide the first definitive evidence that the extracellular secreted proteases produced by D. nodosus are required for virulence and to elucidate the molecular mechanism by which these proteases bind to their natural substrates. We postulate that this exosite mechanism may be used by proteases produced by

  12. Investigation of the Condensation Effect at IRWST Pool Surface on Containment Back Pressure in APR1400 Containment

    International Nuclear Information System (INIS)

    Lee, Eui Jong; Lee, Jin Yong; Lee, Byung Chul

    2006-01-01

    The APR1400 has several new design concepts in order to improve the plant safety functions during a postulated accident. The In-Containment Refueling Water Storage Tank (IRWST) is one of the new design concepts of APR1400 and installed at the bottom of containment building to promote the plant safety functions by simplifying emergency core cooling water source and preventing release of the fission product during an accidents. This design feature, however, brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised under accident conditions. The hot steam which is released from RCS break enters into the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, colder than incoming steam. The purpose of this study is to examine closely the influence of the condensation effect at IRWST on containment back pressure in APR1400 containment building using the GOTHIC code which can predict the steam condensation on IRWST pool surface

  13. The development of a pilot industrial irradiation facility; Realisation d'une station d'irradiation {gamma} a caractere 'semi-industriel'

    Energy Technology Data Exchange (ETDEWEB)

    Balestic, F; Leveque, P; Prevost, C; Comte, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Saclay, utilisee pour le stockage des barres d'uranium apres leur defournement, a ete specialement amenagee pour permettre des irradiations sur des quantites semi-industrielles de produits chimiques et alimentaires. Des calculs de flux {gamma} ont montre qu'il etait possible de realiser des sources intenses et d'irradier de grands volumes avec des arrangements particuliers de barres dans la casemate. L'installation comporte ainsi deux parties ou different la repartition des barres et les dispositifs d'irradiation. Dans une premiere chambre betonnee et climatisee, 9 rangees verticales de barres d'uranium et de canaux a irradiation alternent avec un ecartement minimum de fa n a constituer un assemblage compact. Le diametre des canaux varie de 10 a 20 cm et la hauteur de chargement utile, 70 cm, correspond a la zone sensiblement uniforme du rayonnement. Dans une deuxieme chambre maintenue a -7 deg. C, des balancelles (h: 70 cm, Q: 35 cm) guidees par un monorail circulent autour d'une seule rangee de 20 barres. La carte des flux y a l'interieur de la casemate a ete etablie par une methode de calcul deja utilisee pour les barres de la pile EL2 a Saclay. Le champ du rayonnement varie dans le temps principalement au cours des premiers mois apres le defournement et suivant le motif geo etrique adopte pour les barres. Les intensites d onisation theoriques sont comprises entre dix mille et plusieurs millions de roentgens par heure. Ces valeurs sont comparees aux resultats obtenus avec les dosimetres chimiques au sulfate ferreux et a l'acide oxalique. En outre, des verreseurs etalonnes avec des sources de cobalt permettent un controle rapide de la dose delivree aux balancelles du convoyeur durant leur parcours dans la chambre froide. La casemate de desactivation de EL3 constitue de par sa capacite de traitement la premiere realisation en France d'une station d'irradiation {gamma} a caractere semi-industriel effectuee avec le concours des services du Commissariat a l

  14. Radioprotective properties of some heterocyclic nitrogenous compounds against changes in hemoglobin concentration and hematocrit value in x-irradiated mice; Proprietes radioprotectrices de certains composes heterocycliques azotes sur les variations du taux d'hemoglobine et de la valeur hematocrite chez la souris irradiee

    Energy Technology Data Exchange (ETDEWEB)

    Rousdhy, H; Pierotti, T; Polverelli, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    Radioprotective properties of imidazole and benzimidazole have been proved in previous works. In this study, authors try to demonstrate radioprotective action of these compounds in comparison with cysteamine upon the hematopoietic system after lethal X-irradiation. Results show: no drastic variations of hematologic constants (hemoglobin concentration and hematocrit value) after intraperitoneal injection of radioprotective compounds apart certain apparent reactions with the heterocyclic compounds; the better radioprotective action of benzimidazole. Twenty five days after irradiation, hemoglobin concentration and hematocrit of radio protected mice return to normal values. (author) [French] Les proprietes radioprotectrices de l'imidazole et du benzimidazole ayant ete demontrees dans de precedents travaux, les auteurs se sont attaches a etudier l'action de ces produits sur le systeme hematopofetique en comparaison avec celle de la cysteamine, apres une irradiation a dose letale. A l'aide des criteres choisis, les resultats demontrent: qu'en dehors de certaines reactions apparentes, succedant a l'injection intraperitoneale des heterocycles azotes, les constantes hematologiques (taux d'hemoglobine et valeur hematocrite) ne sont que legerement modifiees; la superiorite du benzimidazole sur les autres produits utilises. Enfin, le vingt-cinquieme jour apres irradiation, les souris protegees par les heterocycles azotes ont un taux d'hemoglobine et une valeur hematocrite tout a fait normaux. (auteur)

  15. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study : rationale and methods

    NARCIS (Netherlands)

    Kaplan, Bonnie J.; Giesbrecht, Gerald F.; Leung, Brenda M. Y.; Field, Catherine J.; Dewey, Deborah; Bell, Rhonda C.; Manca, Donna P.; O'Beirne, Maeve; Johnston, David W.; Pop, Victor J.; Singhal, Nalini; Gagnon, Lisa; Bernier, Francois P.; Eliasziw, Misha; McCargar, Linda J.; Kooistra, Libbe; Farmer, Anna; Cantell, Marja; Goonewardene, Laki; Casey, Linda M.; Letourneau, Nicole; Martin, Jonathan W.

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their

  16. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study : Rationale and methods

    NARCIS (Netherlands)

    Kaplan, B.J.; Giesbrecht, G.F.; Leung, B.M.; Field, C.J.; Dewey, D.; Bell, R.C.; Manca, D.P.; O'Beirne, M.; Johnston, D.W.; Pop, V.J.M.; Singhal, N.; Gagnon, L.; Bernier, F.P.; Eliasziw, M.; McCargar, L.J.; Kooistra, L.; Farmer, A.; Cantell, M.; Goonewardene, L.; Casey, L.M.; Letourneau, N.; Martin, J.W.

    2014-01-01

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their

  17. Calculation of fuel and moderator temperature coefficients in APR1400 nuclear reactor by MVP code

    International Nuclear Information System (INIS)

    Pham Tuan Nam; Le Thi Thu; Nguyen Huu Tiep; Tran Viet Phu

    2014-01-01

    In this project, these fuel and moderator temperature coefficients were calculated in APR1400 nuclear reactor by MVP code. APR1400 is an advanced water pressurized reactor, that was researched and developed by Korea Experts, its electric power is 1400 MW. The neutronics calculations of full core is very important to analysis and assess a reactor. Results of these calculation is input data for thermal-hydraulics calculations, such as fuel and moderator temperature coefficients. These factors describe the self-safety characteristics of nuclear reactor. After obtaining these reactivity parameters, they were used to re-run the thermal hydraulics calculations in LOCA and RIA accidents. These thermal-hydraulics results were used to analysis effects of reactor physics parameters to thermal hydraulics situation in nuclear reactors. (author)

  18. Extracorporeal irradiation of calves blood. Effects on: the lymphocytes, the blood-platelet function, seric proteins, and fibrinogen; Irradiation extracorporelle du sang de veau effets sur: les lymphocytes, la fonction plaquettaire, les proteines seriques et le fibrinogene

    Energy Technology Data Exchange (ETDEWEB)

    Hollard, D; Suscillon, M; Benabid, Y; Concord, E; Ivanoff, M; Laurent, M; Rambaud, F [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The present paper reports the results obtained after extracorporeal irradiation of circulating blood of calves. Animals are divided in 3 groups as follows: - control animals: blood circulation without irradiation; - calves which received 40000 rads during 24 hours of continuous irradiation; - calves which received the same dose, during a period of 5 days (5 hours every day). The more interesting results are: - the early lymphopenia which persists for 7 or 8 weeks and may be in relationship with the change of immunoglobulins; - a constant hyperfibrinemia (12 g/l) never reported, as far as we know, by authors using I.E.C. Several hypothesis are advanced to explain this phenomenon. (authors) [French] Ce travail presente l'ensemble des resultats hematologiques obtenus apres irradiation extracorporelle du sang de veaux repartis en 3 series: - veaux temoins: circulation du sang sans irradiation - veaux soumis a une irradiation continue dose globale integree de 40000 rads en 24 heures; - veaux ayant recu la meme dose globale en irradiation fractionnee repartie sur 5 jours (5 heures par jour). Les resultats les plus marquants sont d'une part une lymphopenie precoce se prolongeant durant 7 a 8 semaines et qui pourrait etre reliee aux modifications observees sur les immunoglobulines. D'autre part une hyperfibrinemie (12 g/l) constante, apparemment jamais signalee par d'autres auteurs utilisant l'I.E.C. Plusieurs hypotheses explicatives de ce phenomene sont exposees et sont a l'etude. (auteurs)

  19. Extracorporeal irradiation of calves blood. Effects on: the lymphocytes, the blood-platelet function, seric proteins, and fibrinogen; Irradiation extracorporelle du sang de veau effets sur: les lymphocytes, la fonction plaquettaire, les proteines seriques et le fibrinogene

    Energy Technology Data Exchange (ETDEWEB)

    Hollard, D.; Suscillon, M.; Benabid, Y.; Concord, E.; Ivanoff, M.; Laurent, M.; Rambaud, F. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The present paper reports the results obtained after extracorporeal irradiation of circulating blood of calves. Animals are divided in 3 groups as follows: - control animals: blood circulation without irradiation; - calves which received 40000 rads during 24 hours of continuous irradiation; - calves which received the same dose, during a period of 5 days (5 hours every day). The more interesting results are: - the early lymphopenia which persists for 7 or 8 weeks and may be in relationship with the change of immunoglobulins; - a constant hyperfibrinemia (12 g/l) never reported, as far as we know, by authors using I.E.C. Several hypothesis are advanced to explain this phenomenon. (authors) [French] Ce travail presente l'ensemble des resultats hematologiques obtenus apres irradiation extracorporelle du sang de veaux repartis en 3 series: - veaux temoins: circulation du sang sans irradiation - veaux soumis a une irradiation continue dose globale integree de 40000 rads en 24 heures; - veaux ayant recu la meme dose globale en irradiation fractionnee repartie sur 5 jours (5 heures par jour). Les resultats les plus marquants sont d'une part une lymphopenie precoce se prolongeant durant 7 a 8 semaines et qui pourrait etre reliee aux modifications observees sur les immunoglobulines. D'autre part une hyperfibrinemie (12 g/l) constante, apparemment jamais signalee par d'autres auteurs utilisant l'I.E.C. Plusieurs hypotheses explicatives de ce phenomene sont exposees et sont a l'etude. (auteurs)

  20. The effect of nodalization and temperature of reactor upper region: Sensitivity analysis for APR-1400 LBLOCA

    International Nuclear Information System (INIS)

    Kang, Dong Gu

    2017-01-01

    Highlights: • The nodalization of APR-1400 was modified to reflect the characteristic of upper region temperature. • The effect of nodalization and temperature of reactor upper region on LBLOCA consequence was evaluated. • The modification of nodalization is an essential prerequisite in APR-1400 LBLOCA analysis. - Abstract: In best estimate (BE) calculation, the definition of system nodalization is important step influencing the prediction accuracy for specific thermal-hydraulic phenomena. The upper region of reactor is defined as the region of the upper guide structure (UGS) and upper dome. It has been assumed that the temperature of upper region is close to average temperature in most large break loss of coolant accident (LBLOCA) analysis cases. However, it was recently found that the temperature of upper region of APR-1400 reactor might be little lower than or similar to hot leg temperature through the review of detailed design data. In this study, the nodalization of APR-1400 was modified to reflect the characteristic of upper region temperature, and the effect of nodalization and temperature of reactor upper region on LBLOCA consequence was evaluated by sensitivity analysis including best estimate plus uncertainty (BEPU) calculation. In basecase calculation, in case of modified version, the peak cladding temperature (PCT) in blowdown phase became higher and the blowdown quenching (or cooling) was significantly deteriorated as compared to original case, and as a result, the cladding temperature in reflood phase became higher and the final quenching was also delayed. In addition, thermal-hydraulic parameters were compared and analyzed to investigate the effect of change of upper region on cladding temperature. In BEPU analysis, the 95 percentile PCT used in current regulatory practice was increased due to the modification of upper region nodalization, and it occurred in the reflood phase unlike original case.

  1. Seismic analysis of the APR1400 nuclear reactor system using a verified beam element model

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong-beom [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Park, No-Cheol, E-mail: pnch@yonsei.ac.kr [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Lee, Sang-Jeong; Park, Young-Pil [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Choi, Youngin [Korea Institute of Nuclear Safety, 62 Gwahak-ro, Yuseong-gu, Daejeon 34142 (Korea, Republic of)

    2017-03-15

    Highlights: • A simplified beam element model is constructed based on the real dynamic characteristics of the APR1400. • Time history analysis is performed to calculate the seismic responses of the structures. • Large deformations can be observed at the in-phase mode of reactor vessel and core support barrel. - Abstract: Structural integrity is the first priority in the design of nuclear reactor internal structures. In particular, nuclear reactor internals should be designed to endure external forces, such as those due to earthquakes. Many researchers have performed finite element analyses to meet these design requirements. Generally, a seismic analysis model should reflect the dynamic characteristics of the target system. However, seismic analysis based on the finite element method requires long computation times as well as huge storage space. In this research, a beam element model was developed and confirmed based on the real dynamic characteristics of an advanced pressurized water nuclear reactor 1400 (APR1400) system. That verification process enhances the accuracy of the finite element analysis using the beam elements, remarkably. Also, the beam element model reduces seismic analysis costs. Therefore, the beam element model was used to perform the seismic analysis. Then, the safety of the APR1400 was assessed based on a seismic analysis of the time history responses of its structures. Thus, efficient, accurate seismic analysis was demonstrated using the proposed beam element model.

  2. Seismic analysis of the APR1400 nuclear reactor system using a verified beam element model

    International Nuclear Information System (INIS)

    Park, Jong-beom; Park, No-Cheol; Lee, Sang-Jeong; Park, Young-Pil; Choi, Youngin

    2017-01-01

    Highlights: • A simplified beam element model is constructed based on the real dynamic characteristics of the APR1400. • Time history analysis is performed to calculate the seismic responses of the structures. • Large deformations can be observed at the in-phase mode of reactor vessel and core support barrel. - Abstract: Structural integrity is the first priority in the design of nuclear reactor internal structures. In particular, nuclear reactor internals should be designed to endure external forces, such as those due to earthquakes. Many researchers have performed finite element analyses to meet these design requirements. Generally, a seismic analysis model should reflect the dynamic characteristics of the target system. However, seismic analysis based on the finite element method requires long computation times as well as huge storage space. In this research, a beam element model was developed and confirmed based on the real dynamic characteristics of an advanced pressurized water nuclear reactor 1400 (APR1400) system. That verification process enhances the accuracy of the finite element analysis using the beam elements, remarkably. Also, the beam element model reduces seismic analysis costs. Therefore, the beam element model was used to perform the seismic analysis. Then, the safety of the APR1400 was assessed based on a seismic analysis of the time history responses of its structures. Thus, efficient, accurate seismic analysis was demonstrated using the proposed beam element model.

  3. Characterisation of the thermostable protease AprX in strains of Pseudomonas fluorescens and impact on the shelf-life of dairy products: preliminary results

    Directory of Open Access Journals (Sweden)

    Nadia Andrea Andreani

    2016-12-01

    Full Text Available Bacterial proteases are involved in food spoilage and shelf-life reduction. Among the bacterial proteases, a predominant role in spoilage of dairy products seems to be played by the thermostable metallo-protease AprX, which is produced by various strains of Pseudomonas fluorescens. Differences in AprX enzyme activity among different strains were highlighted, but the most proteolytic strains were not identified. In this study, the presence of the aprX gene was evaluated in 69 strains isolated from food matrices and 18 reference strains belonging to the P. fluorescens group, which had been previously typed by the multi locus sequence typing method. Subsequently, a subset of reference strains was inoculated in ultra-high temperature milk, and the expression of the aprX gene was evaluated at 22 and 6°C. On the same milk samples, the proteolytic activity was then evaluated through Azocasein and trinitrobenzenesulfonic acid solution assays. Finally, to assess the applicability of the former assay directly on dairy products the proteolityc activity was tested on industrial ricotta samples using the Azocasein assay. These results demonstrate the spread of aprX gene in most strains tested and the applicability of Azocasein assay to monitor the proteolytic activity in dairy products.

  4. Complex regulation of AprA metalloprotease in Pseudomonas fluorescens M114: evidence for the involvement of iron, the ECF sigma factor, PbrA and pseudobactin M114 siderophore.

    Science.gov (United States)

    Maunsell, Bláithín; Adams, Claire; O'Gara, Fergal

    2006-01-01

    In the soil bacterium Pseudomonas fluorescens M114, extracellular proteolytic activity and fluorescent siderophore (pseudobactin M114) production were previously shown to be co-ordinately negatively regulated in response to environmental iron levels. An iron-starvation extracytoplasmic function sigma factor, PbrA, required for the transcription of siderophore biosynthetic genes, was also implicated in M114 protease regulation. The current study centred on the characterization and genetic regulation of the gene(s) responsible for protease production in M114. A serralysin-type metalloprotease gene, aprA, was identified and found to encode the major, if not only, extracellular protease produced by this strain. The expression of aprA and its protein product were found to be subject to complex regulation. Transcription analysis confirmed that PbrA was required for full aprA transcription under low iron conditions, while the ferric uptake regulator, Fur, was implicated in aprA repression under high iron conditions. Interestingly, the iron regulation of AprA was dependent on culture conditions, with PbrA-independent AprA-mediated proteolytic activity observed on skim milk agar supplemented with yeast extract, when supplied with iron or purified pseudobactin M114. These effects were not observed on skim milk agar without yeast extract. PbrA-independent aprA expression was also observed from a truncated transcriptional fusion when grown in sucrose asparagine tryptone broth supplied with iron or purified pseudobactin M114. Thus, experimental evidence suggested that iron mediated its effects via transcriptional activation by PbrA under low iron conditions, while an as-yet-unidentified sigma factor(s) may be required for the PbrA-independent aprA expression and AprA proteolytic activity induced by siderophore and iron.

  5. Expression, purification, and characterization of the Necator americanus aspartic protease-1 (Na-APR-1 (M74)) antigen, a component of the bivalent human hookworm vaccine.

    Science.gov (United States)

    Seid, Christopher A; Curti, Elena; Jones, R Mark; Hudspeth, Elissa; Rezende, Wanderson; Pollet, Jeroen; Center, Lori; Versteeg, Leroy; Pritchard, Sonya; Musiychuk, Konstantin; Yusibov, Vidadi; Hotez, Peter J; Bottazzi, Maria Elena

    2015-01-01

    Over 400 million people living in the world's poorest developing nations are infected with hookworms, mostly of the genus Necator americanus. A bivalent human hookworm vaccine composed of the Necator americanus Glutathione S-Transferase-1 (Na-GST-1) and the Necator americanus Aspartic Protease-1 (Na-APR-1 (M74)) is currently under development by the Sabin Vaccine Institute Product Development Partnership (Sabin PDP). Both monovalent vaccines are currently in Phase 1 trials. Both Na-GST-1 and Na-APR-1 antigens are expressed as recombinant proteins. While Na-GST-1 was found to express with high yields in Pichia pastoris, the level of expression of Na-APR-1 in this host was too low to be suitable for a manufacturing process. When the tobacco plant Nicotiana benthamiana was evaluated as an expression system, acceptable levels of solubility, yield, and stability were attained. Observed expression levels of Na-APR-1 (M74) using this system are ∼300 mg/kg. Here we describe the achievements and obstacles encountered during process development as well as characterization and stability of the purified Na-APR-1 (M74) protein and formulated vaccine. The expression, purification and analysis of purified Na-APR-1 (M74) protein obtained from representative 5 kg reproducibility runs performed to qualify the Na-APR-1 (M74) production process is also presented. This process has been successfully transferred to a pilot plant and a 50 kg scale manufacturing campaign under current Good Manufacturing Practice (cGMP) has been performed. The 50 kg run has provided a sufficient amount of protein to support the ongoing hookworm vaccine development program of the Sabin PDP.

  6. Extended station blackout analyses of an APR1400 with MARS-KS

    Directory of Open Access Journals (Sweden)

    Kim Woongbae

    2016-01-01

    Full Text Available The Fukushima Daiichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electric energy required for essential systems during a station blackout is provided from emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6, and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating extended station blackout scenarios, the best estimate MARS-KS computer code was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study on reactor coolant pump seal leakage was carried out.

  7. Evaluation of Ablation rate by the change of Sacrificial Material for PECS in EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Do Hyun; Kim, Yong Soo; Lee, Keun Sung [KHNP-CRI, Daejeon (Korea, Republic of)

    2015-05-15

    EU-APR, modified and improved from its original design of APR1400, has been developed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. In EU-APR, Severe Accident Mitigation Systems are dedicated to providing an independent defense line from that of Engineered Safety Feature (ESF) and Diverse Safety Feature (DSF). They consist of Emergency Reactor Depressurization System (ERDS), Passive Ex-vessel corium retaining and Cooling System (PECS), Severe Accident Containment Spray System (SACSS), Hydrogen Mitigation System (HMS) and Containment Filtered Vent System (CFVS). The PECS, so called core catcher, was introduced to prevent the Molten Core Concrete Interaction (MCCI) after Reactor Vessel (RV) failure. The PECS has experienced a lot of changes from its original design. Recently, the most significant change was that as a SM, limestone concrete is installed on PECS's body wall instead of previous sacrificial material rich in Fe{sub 2}O{sub 3}. The main reason of this design change is to overcome the issue that the sacrificial material is ablated rather too fast when reacting with corium that contains a large fraction of Zr metal. Other changes in the geometry of PECS's wall and downcomer design are considered as minor ones. In this paper, the comparison of ablation rates between previous SM and limestone concrete is carried out using MAAP5 code with respective MCCI model according to the material. In this paper, major improvements of MAAP5 model for PECS in EU-APR are presented and the evaluation of ablation rate for the previous SM model and the new LC model is carried out by means of ablation depths with LBLOCA sequence. Two models have respective unique ablation process. The ablation of LC model proceeds at a constant rate regardless of water while the ablation of SM model proceeds at a faster rate before the arrival of cooling water for corium and SM mixture. The change of sacrificial material

  8. Outcomes of patients with abdominoperineal resection (APR) and low anterior resection (LAR) who had very low rectal cancer.

    Science.gov (United States)

    Yeom, Seung-Seop; Park, In Ja; Jung, Sung Woo; Oh, Se Heon; Lee, Jong Lyul; Yoon, Yong Sik; Kim, Chan Wook; Lim, Seok-Byung; Kim, Nayoung; Yu, Chang Sik; Kim, Jin Cheon

    2017-10-01

    We compared the oncological outcomes of sphincter-saving resection (SSR) and abdominoperineal resection (APR) in 409 consecutive patients with very low rectal cancer (i.e., tumors within 3 cm from the anal verge); 335 (81.9%) patients underwent APR and 74 (18.1%) underwent SSR. The APR group comprised higher proportions of men (67.5% vs 55.4%, P = .049) and advanced-stage patients (P cancer stages. RFS was associated with ypT and ypN stages in patients who received PCRT, while pN stage, lymphovascular invasion (LVI), and circumferential resection margin (CRM) involvement were risk factors for RFS in those who did not receive PCRT. Notably, SSR was not found to be a risk factor for RFS in either subgroup. Patients who were stratified according to cancer stage and PCRT also showed no differences in RFS according to the mode of surgery. Our results demonstrate that, regardless of PCRT administration, SSR is an effective treatment for very low rectal cancer, while CRM is an important prognostic factor for patients who did not receive PCRT.

  9. Development of phenomena identification and ranking table for APR1400 main steam line break

    International Nuclear Information System (INIS)

    Song, J. H.; Chung, B. D.; Jeong, J. J.

    2003-01-01

    A Phenomena Identification and Ranking Table (PIRT) was developed for the Main Steam Line Break (MSLB) event of an APR-1400 (Advanced Power Reactor-1400). A team of experts from research institutes, industries, and regulatory bodies participated in the development. The selected event was a double-ended steam line break at full power with the reactor coolant pump running. The panel selected the fuel performance as the primary safety criterion for ranking. The plant design data, the results of APR-1400 safety analysis, and the results of additional best estimate analysis by MARS2.1 were utilized. Three phases of pre-trip, rapid cool-down, and safety injection phase were identified. Then, the ranking of a system, components, phenomenon/process based on the relative importance to the primary evaluation criterion were followed for each time phase. Finally, the knowledge-level for each important process in the component was ranked in terms of the existing knowledge. The highly ranked phenomena identified for APR-1400 MSLB are tube wall heat transfer at the steam generator shell, void distribution at the steam generator shell, liquid entrainment in the separators, mixture level in the separators, boron mixing in the upper down comer, boron transport and thermal mixing in the lower plenum, stored energy release in the upper head, and flow to and/from the upper head. The PIRT will be used as a guide in planning cost effective experimental programs and code development efforts, especially for the quantification of the process and/or phenomena, which have a high importance but low knowledge level

  10. Evaluation of Coolant Injection Procedure in the Severe Accident Management Strategy of APR1400

    International Nuclear Information System (INIS)

    Cho, Yongjin; Lim, Kukhee; Song, Sungchu; Lee, Sukho; Hwang, Taesuk

    2013-01-01

    A coolant injection strategy in the severe accident management guideline (SAMG) of APR1400 relates to immediate coolant injection into RCS (Reactor Coolant System) or injection following the recovery of secondary coolant inventory. This strategy could play important role in accident mitigation and radiological consequences. In this study, appropriateness of the strategy was evaluated using MELCOR1.8.6 and several sensitivity studies of the key parameters were performed. Analysis for APR1400 using MELCOR 1.8.6 was performed to evaluate the effectiveness of accident management strategies and the following conclusions were identified. Sequential operation of secondary and RCS injection may not be the best strategy and the simultaneous injection of secondary and RCS injection could be more preferable. At least, the RCS injection should start before complete drainage of water in the safety injection tank using mobile pumps. In this study, the effectiveness of timing of operator action has been examined and the amount of injection flowrate needs to be studied in the future

  11. Simplified study for the proposed APR1400 condenser performance based on EL-DABAA SITE, EGYPT, with respect to BNPP and SHIN KORI NPP

    Energy Technology Data Exchange (ETDEWEB)

    Abdoelatef, M. Gomaa; Rezk, Osama; Lee, YonKwan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    • Perception of nuclear power as a convenient, economically competitive and viable source of energy which, if introduced in the country, would not only complement the traditional energy sources, but would also promote technological development and serve as an incentive for social and economic progress. In this paper we will introduce APR-1400 as the most likely selected reactor type for 1st Egyptian Nuclear Power Plant. Then we will study the optimized APR-1400 condenser performance based on El-Dabaa site conditions. As the climate conditions, especially the seawater temperatures (intake for the cooling system) having a direct effects on the condenser performance and the overall NPP Efficiency, we studied the seawater temperature change based on EL-Dabaa site conditions and it's feedback on the proposed APR-1400 condenser performance and the NPP efficiency. All of the calculations and analysis had been executed by using KINGS NPA by applying EL-Dabaa seawater temperature variations for the 2 types of APR-1400 Condensers (Shinkori, south Korea and Barakah, UAE), and the main findings were as follow: For the APR-1400 condensers (Shinkori and Barakah) performance • The average difference all over the year for saturation temperature, cooling water outlet temperature, and condenser pressure are 0.135 .deg. C, .05785 .deg. C, and 0.3948 mHgA respectively. This shows that the Barakah condenser performance is not significantly better than the shinkori condenser performance based on EL-Dabaa Conditions, especially if we considered the cost difference between the two condensers designs. For APR-1400 NPPs (Shinkori and Barakah) net efficiency • The average difference all over the year for the power productions and net efficiency are 1.4791 MWe and .00037 %, respectively.

  12. Using a Classroom Response System to Improve Multiple-Choice Performance in AP[R] Physics

    Science.gov (United States)

    Bertrand, Peggy

    2009-01-01

    Participation in rigorous high school courses such as Advanced Placement (AP[R]) Physics increases the likelihood of college success, especially for students who are traditionally underserved. Tackling difficult multiple-choice exams should be part of any AP program because well-constructed multiple-choice questions, such as those on AP exams and…

  13. Analysis of Turbine Load Rejection for APR1400 using SPACE

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon [KEPCO Engineering and Construction Co. Ltd., Deajeon (Korea, Republic of)

    2016-10-15

    Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses.

  14. Analysis of Turbine Load Rejection for APR1400 using SPACE

    International Nuclear Information System (INIS)

    Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon

    2016-01-01

    Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses

  15. PLUS 7TM advanced fuel assembly development program for KSNPs and APR1400

    International Nuclear Information System (INIS)

    Kim, Kyutae; Stucker, David L.

    2002-01-01

    KNFC and Westinghouse have recently completed the development of the PLUS 7 TM advanced 16 X 16 fuel assembly for the Korean Standard Nuclear Plants (KSNPs) and the Advanced Power Reactor 1400 (APR 1400). This fuel design utilized the proven advanced design features including mixing vane spacer grids to increase critical heat flux performance, ZIRLO TM advanced materials to enable high-duty, high burnup fuel management and an optimized fuel rod diameter which improves fuel cycle cost while resulting in significant standardization of Korean fuel manufacture. PLUS 7 TM , also includes a patented spacer grid design with conformal fuel rod support designed to provide superior fuel rod wear/fretting resistance while minimizing pressure drop. This paper will present an overview of the PLUS 7 TM fuel assembly development process including a summary of the three-year design and testing program from a mechanical, neutronic, and thermal/hydraulic perspective. The PLUS 7 TM fuel for the KSNPs and the APR1400 reactors results in multi-million dollar per cycle savings in imported enriched uranium product for the Korean nuclear power program with technology specifically developed for Korea by experienced Korean engineers

  16. A Study on the Embedment Effect in the Soil-Structure Interaction Analysis of the APR1400

    International Nuclear Information System (INIS)

    Young-Sun Jang; Kwang-Ho Joo; Chong-Hak Kim

    2002-01-01

    The SSI (Soil-Structure Interaction) analyses are being performed for the APR1400 (Advanced Power Reactor 1400 MWe, Old name - KNGR; Korean Next Generation Reactor) design, because the APR1400 is developed as a Standard Nuclear Power Plant concept enveloping suitable soil conditions. For the SSI analyses, SASSI program which adopts the Flexible Volume Method is used. In the SSI analyses, there can be uncertainties by Bond and De-bond problem between the structure and lateral soil elements. According to ASCE Standard 4, one method to address this concern is to assume no connectivity between structure and lateral soil over the upper half of the embedment of 20 ft (6 m), whichever is less. This study is performed as a part of the parametric analyses for the APR1400 seismic analyses to address the concern of the potential embedment effect on the in-structure response spectra due to connectivity between structure and lateral soil. In this study, 4 model cases are analyzed to check the potential embedment effect - Full connection, 20 ft no connectivity which is defined as a minimum De-bond depth of the soil in ASCE Standard 4 and 26.5 ft no connectivity between structure and lateral soil over the upper half of the embedment. Last one is full no connection for only reference. The in-structure response spectra are compared with the response spectra without considering the embedment effect. (authors)

  17. Cloned Bacillus subtilis alkaline protease (aprA) gene showing high level of keratinolytic activity.

    Science.gov (United States)

    Zaghloul, T I

    1998-01-01

    The Bacillus subtilis alkaline protease(aprA) gene was previously cloned on a pUBHO-derivative plasmid. High levels of expression and gene stability were demonstrated when B. subtilis cells were grown on the laboratory medium 2XSG. B. subtilis cells harboring the multicopy aprA gene were grown on basal medium, supplemented with 1 % chicken feather as a source of energy, carbon, and nitrogen. Proteolytic and keratinolytic activities were monitored throughout the cultivation time. A high level of keratinolytic activity was obtained, and this indicates that alkaline protease is acting as a keratinase. Furthermore, considerable amounts of soluble proteins and free amino acids were obtained as a result of the enzymatic hydrolysis of feather. Biodegradation of feather waste using these cells represents an alternative way to improve the nutritional value of feather, since feather waste is currently utilized on a limited basis as a dietary protein supplement for animal feedstuffs. Moreover, the release of free amino acids from feather and the secreted keratinase enzyme would promote industries based on feather waste.

  18. Constructibility assessment of APR1400

    International Nuclear Information System (INIS)

    Cho, Sung Jae; Kang, Yong Chul; Lee, Jae Gon; Lim, Woo Sang

    2003-01-01

    APR1400 (formerly KNGR) development is one of national G-7 projects sponsored by government and KHNP (Korea Hydro and Nuclear Power Co., LTD). It is an evolutionary standard reactor with the thermal output of 4000MWt and has been adopted for Shin-Kori Unit 3 and 4. The government organizations, research institutes, universities and industries have participated in the project since 1992 along with KHNP, and the standard design certification program was issued in May 2002. The project set up the top-tier requirements about the safety, economy, operability and maintainability, and constructibility in the early design stage. The requirements have been evaluated periodically during the design process, and the results were reflected to the design. This paper describes the methods for constructibility enhancement and the results of schedule analysis to assure meeting construction duration target, which is set to 48 months from the first concrete pouring to the commercial operation on the condition that learning effects are maximized at Nth plant. To meet the target schedule, the design characteristics and constructibility studies such as new construction methods and construction schedule analysis were performed. The new construction methods presented here are over the top method for NSSS components, deck plate and steel from for concrete wall and slab, automatic welding for large bore piping, and modularization of components and structure, etc. (author)

  19. Analysis of Total Loss of Feedwater for APR1400 using SPACE

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Min; Park, Seok Jeong; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon [KEPCO Engineering and Construction, Deajeon (Korea, Republic of)

    2016-10-15

    The Total Loss of FeedWater (TLOFW) event is an accident that main feedwater and auxiliary feedwater of secondary side are not supplied to steam generators. APR1400 uses the Safety Depressurization and Vent System (SDVS) for the F and B operation and SDVS is designed to perform the rapid depressurization function of Reactor Coolant System (RCS) through the remote manual operation when TLOFW is occurred. If RCS pressure falls below a Safety Injection Pump (SIP) working pressure, it can be possible to start the F and B operation which injects SIP flow to RCS and releases the RCS vapor and two-phase flow through Pilot Operated Safety Relief Valves (POSRVs) by opening the POSRVs, and then it can be possible to remove the decay heat. The design requirement of SDVS is that the core water level should be maintained at higher than 2 feet from the top of active core during the F and B operation. The TLOFW analysis was carried out to evaluate the capability of decay heat removal for APR1400 using newly developed SPACE code. The analysis results show that the F and B operation with 2 POSRVs and 2 SIPs and the F and B operation with 4 POSRVs and 4 SIPs meet the SDVS design requirement for the fuel cladding temperature. The comparison with RELAP5 shows good agreement and it validates the applicability of SPACE code for this type of accident analysis.

  20. Single port-assisted fully laparoscopic abdominoperineal resection (APR) with immediate V-RAM flap reconstruction of the perineal defect.

    LENUS (Irish Health Repository)

    Ali, Sayid

    2012-09-01

    Abdominoperineal resection (APR) of anorectal cancers after neoadjuvant chemoradiotherapy may incur significant perineal morbidity. While vertical rectus abdominis muscle (V-RAM) flaps can fill the pelvic resection space with health tissue, their use has previously been described predominantly in association with laparotomy. Here, we describe a means of combination laparoscopic APR with V-RAM flap reconstruction that allows structural preservation of the entire abdominal wall throughout the oncological resection and of the deep parietal layers after V-RAM donation. Furthermore, a single port access device used at the end colostomy site allows a second senior surgeon assist with an additional two working instruments for the purpose of improved pelvic tissue retraction, especially useful in obese patients.

  1. The Enhanced Radiocaesium Levels of People in Northern Sweden; Charge Corporelle de Radiocesium Relativement Elevie chez les Habitants de la Suede Septentrionale; 041f 041e 0414 0 ; Cargas de Radiocesio Anormalmente Elevadas en los Habitantes del Norte de Suecia

    Energy Technology Data Exchange (ETDEWEB)

    Liden, K.; Naversten, Y. [Radiation Physics Department, University of Lund (Sweden)

    1964-11-15

    After the discovery of the high caesium-137 body activity of Swedish Lapps early in 1961 measurements were performed on large groups of Lapps and other Swedes on a similar diet. In September, 1961 162 persons from an area close to the arctic circle were measured in a semi-portable whole-body counter. In the Lapp group caesium-137 levels ranging from 15 to 690 nc were found. At the same place a group of 157 persons were counted in April, 1962. At that time the caesium-137 range was 30 to 740 nc. During a five weeks expedition to seven different centres in northern Sweden in April, 1963 a total number of 458 persons were studied by means of the same counter set up in a bus. The caesium-137 range for Lapps in the above mentioned area was then 50 to 900 nc. The average caesium-137 body activity of all the adult male reindeer breeders (78 persons) measured in April, 1963 was 461 nc. The maximum body activity found was 1340 nc caesium-137. Details are presented on the variation of caesium-137 in human beings with age, sex, occupation and diet as well as on the seasonal and geographical variations found. An increase in the average caesium-137 body activity has been observed from 1961 to 1963. For comparison, non-Lapps have also been counted. Almost all of them also show a substantially enhanced caesium-137 level if compared with persons in southern Sweden. The radiation dose from caesium-137 is in many cases two to three times as large as the potassium-40 dose, the observed maximum giving a dose eight times that of the potassium dose. (author) [French] Lorsqu'on eut decouvert au debut de 1961 que la charge corporelle de cesium 137 etait elevee chez les Lapons de Suede, on a fait des dosages sur des groupes importants de Lapons et d'autres habitants de la Suede qui suivent un regime alimentaire analogue. En septembre 1961, on a effectue des dosages sur 162 personnes d'une region situee a proximite du cercle arctique au moyen d'un anthropogammametre semi- portatif. Chez les

  2. Diversity of sulfur-cycle prokaryotes in freshwater lake sediments investigated using aprA as the functional marker gene.

    Science.gov (United States)

    Watanabe, Tomohiro; Kojima, Hisaya; Takano, Yoshinori; Fukui, Manabu

    2013-09-01

    The diversity of sulfate-reducing prokaryotes (SRPs) and sulfur-oxidizing prokaryotes (SOPs) in freshwater lake ecosystems was investigated by cloning and sequencing of the aprA gene, which encodes for a key enzyme in dissimilatory sulfate reduction and sulfur oxidation. To understand their diversity better, the spatial distribution of aprA genes was investigated in sediments collected from six geographically distant lakes in Antarctica and Japan, including a hypersaline lake for comparison. The microbial community compositions of freshwater sediments and a hypersaline sediment showed notable differences. The clones affiliated with Desulfobacteraceae and Desulfobulbaceae were frequently detected in all freshwater lake sediments. The SOP community was mainly composed of four major phylogenetic groups. One of them formed a monophyletic cluster with a sulfur-oxidizing betaproteobacterium, Sulfuricella denitrificans, but the others were not assigned to specific genera. In addition, the AprA sequences, which were not clearly affiliated to either SRP or SOP lineages, dominated the libraries from four freshwater lake sediments. The results showed the wide distribution of some sulfur-cycle prokaryotes across geographical distances and supported the idea that metabolic flexibility is an important feature for SRP survival in low-sulfate environments. Copyright © 2013 Elsevier GmbH. All rights reserved.

  3. Precificação de consultoria empresarial com a contribuição das estratégias de apreçamento = Entrepreneurial Counseling Pricing with Pricing Strategy Contribution

    Directory of Open Access Journals (Sweden)

    Nivaldo João dos Santos

    2008-11-01

    Full Text Available A precificação de serviços de consultoria também pode se beneficiar dos conceitos e idéias das estratégias de apreçamento de bens de consumo de massa, especificamente na área de consultoria de gestão empresarial. Apesar deste campo ser dominado por grandes corporações multinacionais, ainda existe espaço para empresas e profissionais nacionais. Por se tratar de mercado que envolve valores de grande magnitude, imaginasse que as instituições de sucesso adotem estratégia de apreçamento. Neste trabalho, estratégias de apreçamento foram selecionadas para exame e verificação de aplicabilidade quando do estabelecimento valor pelos serviços da consultoria de gestão empresarial. O apreçamento de desnatação, apreçamento de penetração, apreçamento neutro e apreçamento baseado em valor tiveram seus conceitos sintetizados para fins de verificação. O apreçamento baseado em valor se revelou o mais propício para este tipo de produto (consultoria e o processo de comunicação é o elemento crítico para evidenciar valor, benefícios e, finalmente, justificar o preço do serviço. A sugestão de roteiro para apreçamento de serviço de consultoria empresarial é apresentada ao final, como resultado da análise das diversas estratégias de apreçamento.The pricing of counseling services may also benefit from strategy concepts and ideas ofmass consumption goods pricing, specifically within the entrepreneurial managementcounseling area. Even though this field has been taken over by big multinationalcorporations, there is still some space for national enterprisings and professionals. As itis a market that involves values of great magnitude, it is thought that successfulinstitutions adopt this pricing strategy. In this study, pricing strategies were selectedfor analysis and applicability checking by the time the price for entrepreneurialmanagement counseling service was established. The skimming pricing, penetratingpricing, neutral

  4. A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

    Energy Technology Data Exchange (ETDEWEB)

    Ualikhan Zhiyenbayev [KAIST, Daejeon (Korea, Republic of); Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2015-10-15

    This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether.

  5. A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

    International Nuclear Information System (INIS)

    Ualikhan Zhiyenbayev; Chung, Dae Wook

    2015-01-01

    This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether

  6. Probability of Neutralization Estimation for APR1400 Physical Protection System Design Effectiveness Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myungsu; Lim, Heoksoon; Na, Janghwan; Chi, Moongoo [Korea Hydro and Nuclear Power Co. Ltd. Central Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    It is focusing on development of a new designing process which can be compatible to international standards such as IAEA1 and NRC2 suggest. Evaluation for the design effectiveness was found as one of the areas to improve. If a design doesn't meet a certain level of effectiveness, it should be re-designed accordingly. The effectiveness can be calculated with combination of probability of Interruption and probability of neutralization. System Analysis of Vulnerability to Intrusion (SAVI) has been developed by Sandia National Laboratories for that purpose. With SNL's timely detection methodology, SAVI has been used by U.S. nuclear utilities to meet the NRC requirements for PPS design effectiveness evaluation. For the SAVI calculation, probability of neutralization is a vital input element that must be supplied. This paper describes the elements to consider for neutralization, probability estimation methodology, and the estimation for APR1400 PPS design effectiveness evaluation process. Markov chain and Monte Carlo simulation are often used for simple numerical calculation to estimate P{sub N}. The results from both methods are not always identical even for the same situation. P{sub N} values for APR1400 evaluation were calculated based on Markov chain method and modified to be applicable for guards/adversaries ratio based analysis.

  7. Review of EU-APR Design for Selected Safety Issues of WERNA RHWG 2013

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Soo; Kim, Ji Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Western European Nuclear Regulators' Association (WENRA) was established in 1999 to develop a harmonized approach to nuclear safety and radiation protection and their regulation. In 2013, the Reactor Harmonization Working Group (RHWG) of WENRA sets out the common positions on the seven selected key safety issues. This paper is to introduce the regulatory positions of WENRA RHWG 2013 and to review the compliance of the EU-APR with them. In this paper, we reviewed the compliance of the EUAPR regarding seven safety issues for new NPPs presented by WERNA RHWG in 2013. The EU-APR design fully complies with all WERNA RHWG safety issues since the following measures have been incorporated in it: - Successive five levels of DiD maintaining independence between different levels of DiD - Diverse design against multiple failure events such as ATWS, SBO, Loss of Ultimate Heat Sink, and Loss of Spent Fuel Pool Cooling - SAs dedicated mitigation systems to ensure the containment integrity during the SAs. - Practically eliminates accident sequences with a large or early release of radiological materials by diverse designs for multiple failure events, SAs dedicated mitigation system, and double containment design - Standard site parameters not lead to core melt accidents due to natural or man-made external hazards.

  8. Real-time PCR quantification and diversity analysis of the functional genes aprA and dsrA of sulfate-reducing bacteria in marine sediments of the Peru continental margin and the Black Sea

    Directory of Open Access Journals (Sweden)

    Axel eSchippers

    2011-12-01

    Full Text Available A quantitative, real-time PCR (Q-PCR assay for the functional gene adenosine 5´-phosphosulfate reductase (aprA of sulfate-reducing bacteria (SRB was designed. This assay was applied together with described Q-PCR assays for dissimilatory sulfite reductase (dsrA and the 16S rRNA gene of total Bacteria to marine sediments from the Peru margin (0 – 121 meters below seafloor (mbsf and the Black Sea (0 – 6 mbsf. Clone libraries of aprA show that all isolated sequences originate from SRB showing a close relationship to aprA of characterised species or form a new cluster with only distant relation to aprA of isolated SRB. Below 40 mbsf no aprA genes could be amplified. This finding corresponds with results of the applied new Q-PCR assay for aprA. In contrast to the aprA the dsrA gene could be amplified up to sediment depths of 121 mbsf. Even in such an extreme environment a high diversity of this gene was detected. The 16S rRNA gene copy numbers of total Bacteria were much higher than those of the functional genes at all sediment depths and used to calculate the proportion of SRB to the total Bacteria. The aprA and dsrA copy numbers comprised in average 0.5 - 1 % of the 16S rRNA gene copy numbers of total Bacteria in the sediments up to a depth of ca. 40 mbsf. Depth profiles of the aprA and dsrA copy numbers were almost equal for all sites. Gene copy numbers decreased concomitantly with depth from around 108 / g sediment close to the sediment surface to less than 105 / g sediment at 5 mbsf. In the zone without detectable sulfate in the pore water from ca. 40 – 121 mbsf (Peru margin ODP site 1227, only dsrA (but not aprA was detected with copy numbers of less than 104 / g sediment, comprising ca. 14 % of the 16S rRNA gene copy numbers of total Bacteria. In this zone sulfate might be provided for SRB by anaerobic sulfide oxidation.

  9. Developing Optimal Procedure of Emergency Outside Cooling Water Injection for APR1400 Extended SBO Scenario Using MARS Code

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Jong Rok; Oh, Seung Jong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    In this study, we examined optimum operator actions to mitigate extended SBO using MARS code. Particularly, this paper focuses on analyzing outside core cooling water injection scenario, and aimed to develop optimal extended SBO procedure. Supplying outside emergency cooling water is the key feature of flexible strategy in extended SBO situation. An optimum strategy to maintain core cooling is developed for typical extended SBO. MARS APR1400 best estimate model was used to find optimal procedure. Also RCP seal leakage effect was considered importantly. Recent Fukushima accident shows the importance of mitigation capability against extended SBO scenarios. In Korea, all nuclear power plants incorporated various measures against Fukushima-like events. For APR1400 NPP, outside connectors are installed to inject cooling water using fire trucks or portable pumps. Using these connectors, outside cooling water can be provided to reactor, steam generators (SG), containment spray system, and spent fuel pool. In U. S., similar approach is chosen to provide a diverse and flexible means to prevent fuel damage (core and SFP) in external event conditions resulting in extended loss of AC power and loss of ultimate heat sink. Hence, hardware necessary to cope with extended SBO is already available for APR1400. However, considering the complex and stressful condition encountered by operators during extended SBO, it is important to develop guidelines/procedures to best cope with the event.

  10. Domestic activity for technical development of the APR1400's RCP performance test

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Seok; Kim, Seok; Bae, Byung-Uhn; Cho, Yun-Jae; Kim, Yeon-Sik; Jeon, Woo-Jin; Yun, Young-Jung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The thermal hydraulic and electric capability of the RCP test facility (RCPTF) covers up to 18.5 MPa, 343 .deg. C, 11.7 m{sup 3}/s, and 14.0 MW in the design pressure, temperature, flow rate, and the maximum electric power, respectively. In 2013, commissioning test had been performed to verify its designed capability, followed by several modifications in the RCPTF including signal processing and control logic to enhance verification and evaluation capability of the RCP performance. After finishing the commissioning and modification of the RCPTF, type test for the new-type RCP had been performed successfully. In this paper, several technical issues developed in the 2013 and the type test's method and results will be described. In the present paper, the technical activities for the development of the verification test of APR1400's RCP are described. KAERI has completed the full set of technology development, prerequisite for the RCP verification test, and now on the way to perform a test for the sealing capacity of the seal assembly during the Station Block Out (SBO) condition of APR1400.

  11. Monitoring the impact of an aspartic protease (MpAPr1) on grape proteins and wine properties.

    Science.gov (United States)

    Theron, Louwrens Wiid; Bely, Marina; Divol, Benoit

    2018-04-23

    The perception of haze in wine is brought about when pathogenesis-related proteins become unstable and aggregate, subsequently resulting in crosslinking until it develops into light-dispersing particles. Elimination of these proteins is usually achieved via bentonite fining, which, although effective, suffers from several drawbacks. The utilization of proteases has been proposed as an ideal alternative. In a previous study, an aspartic protease (MpAPr1) from the yeast Metschnikowia pulcherrima was purified and shown to be partially active against grape proteins in synthetic medium. In this study, the effects of pure MpAPr1 supplemented to Sauvignon Blanc juice on subsequent fermentation were investigated. The juice was incubated for 48 h and thereafter inoculated with Saccharomyces cerevisiae. Results revealed that the enzyme had no observable effects on fermentation performance and retained activity throughout. Protein degradation could be detected and resulted in a significant modification of the wine composition and an increase in the presence of certain volatile compounds, especially those linked to amino acid metabolism.

  12. The determination by irradiation with a pulsed neutron generator and delayed neutron counting of the amount of fissile material present in a sample; Determination de la quantite de matiere fissile presente dans un echantillon par irradiation au moyen d'une source pulsee de neutrons et comptage des neutrons retardes

    Energy Technology Data Exchange (ETDEWEB)

    Beliard, L; Janot, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    A preliminary study was conducted to determine the amount of fissile material present in a sample. The method used consisted in irradiating the sample by means of a pulsed neutron generator and delayed neutron counting. Results show the validity of this method provided some experimental precautions are taken. Checking on the residual proportion of fissile material in leached hulls seems possible. (authors) [French] Ce rapport rend compte d'une etude preliminaire effectuee en vue de determiner la quantite de matiere fissile presente dans un echantillon. La methode utilisee consiste a irradier l'echantillon considere au moyen d'une source puisee de neutrons et a compter les neutrons retardes produits. Les resultats obtenus permettent de conclure a la validite de la methode moyennant certaines precautions. Un controle de la teneur residuelle en matiere fissile des gaines apres traitement semble possible. (auteurs)

  13. Observance to the teeth casts of fluorination after head and neck irradiation; Observance aux gouttieres dentaires de fluoration apres irradiation de la tete et du cou

    Energy Technology Data Exchange (ETDEWEB)

    Albarghach, N. [CHU Morvan, 29 - Brest (France); Righini, C. [CHU Michallon, 38 - Grenoble (France); Thariat, J. [Centre Antoine-Lacassagne, 06 - Nice (France)

    2009-10-15

    The application of teeth casts with fluorinated gel is omitted in practice after six months for most of patients. The reasons can be an inadequate information on the application time of casts, mucitis pain during excessive application of fluorinated gel during irradiation creating then, apprehension of fluorinated gels. A questionnaire of observance during the consultation can be an education tool. repeated for the same patients at the next follow up consultation and compared it could allow to measure the impact of awareness measures during the follow up. (N.C.)

  14. Numerical Investigation of APR1400 Loop Seal Reformation and Clearing Phenomena during Post-LOCA Long-term Cooling Period using RELAP5

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. I.; Jeon, J. H.; Park, J. H.; Sung, H. J.; Lee, J. I.; Choi, T. S. [KEPCO NF, Daejeon (Korea, Republic of)

    2016-10-15

    Hand calculations had been tried to show that the loop seal reformation does not degrade the LTC performance of the APR1400, but the result was unclear. Therefore, the code assessments of the phenomena for APR1400 are required to guarantee the performance of LTC. In the present study, RELAP5/MOD3.3 patch04 (3.3iy) is used for the assessments. The safety degradation, e.g., possible cladding temperature rise due to LSRC during LTC period would be stronger when the safety injection (SI) is larger, while the core uncovery is more probable when the SI is smaller. In other words, it is not easy to determine the limiting condition of safety injection as two or four safety injection pumps (SIPs) in APR1400. In the present study, both the minimum SI condition with two SIPs and the maximum SI condition with four SIPs are considered. The study focuses only on the top slot break condition due to its highest possibility of LSRC phenomena. The LSRC issues for APR1400 are discussed and investigated through numerical investigation using RELAP5MOD3.3 patch04 for top-slot cold leg (pump discharge line) breaks. The major items investigated are whether the simultaneous four loop seal reformation is possible and whether there is any possible violation of the long term coolability criteria in 10 CFR 50.46. Safety injection with two SIPs and four SIPs are investigated to find that the four loop seal reformation condition before the simultaneous injection may occur only with four SIPs.

  15. Post-test analysis for the APR1400 LBLOCA DVI performance test using MARS

    International Nuclear Information System (INIS)

    Bae, Kyoo Hwan; Lee, Y. J.; Kim, H. C.; Bae, Y. Y.; Park, J. K.; Lee, W.

    2002-03-01

    Post-test analyses using a multi-dimensional best-estimate analysis code, MARS, are performed for the APR1400 LBLOCA DVI (Direct Vessel Injection) performance tests. This report describes the code evaluation results for the test data of various void height tests and direct bypass tests that have been performed at MIDAS test facility. MIDAS is a scaled test facility of APR1400 with the objective of identifying multi-dimensional thermal-hydraulic phenomena in the downcomer during the reflood conditions of a large break LOCA. A modified linear scale ratio was applied in its construction and test conditions. The major thermal-hydraulic parameters such as ECC bypass fraction, steam condensation fraction, and temperature distributions in downcomer are compared and evaluated. The evaluation results of MARS code for the various test cases show that: (a) MARS code has an advanced modeling capability of well predicting major multi-dimensional thermal-hydraulic phenomena occurring in the downcomer, (b) MARS code under-predicts the steam condensation rates, which in turn causes to over-predict the ECC bypass rates. However, the trend of decrease in steam condensation rate and increase in ECC bypass rate in accordance with the increase in steam flow rate, and the calculation results of the ECC bypass rates under the EM analysis conditions generally agree with the test data

  16. Benjamin Crémieux, Inquiétude et reconstruction. Essai sur la littérature d’après-guerre

    OpenAIRE

    Brangé, Mireille

    2016-01-01

    Après xxe siècle (1924) en 2010 reparaît ce recueil de 1931 où l’A. étudie ensemble «les faits littéraires, les concordances et les divergences qui caractérisent une époque, les formes spécifiques qu’y prennent les œuvres, […] leurs rapports avec le milieu historique et social, la vision de la vie qui s’y exprime» (p. 8). La même année que les Essais critiques d’Arland et que les articles de Drieu La Rochelle sur «la fin de l’après-guerre», il interroge l’inquiétude des années 1920 et envisag...

  17. Migration d'une broche dans le canal médullaire cervical après une ...

    African Journals Online (AJOL)

    Migration d'une broche dans le canal médullaire cervical après une ostéosynthèse de l'articulation acromio-claviculaire. Bah Aliou, El Alaoui Adil. Abstract. We report the case of a 49 year-old right-handed chef with left shoulder trauma occurred during a football game. The diagnosis was fracture of the distal quarter of ...

  18. L’Allemagne : un non – lieu pour les exiles judéo-allemands après 1945 ?

    OpenAIRE

    Bohnekamp, Dorothea

    2017-01-01

    L’omniprésence de l’Allemagne dans les productions littéraires des exilés judéo-allemands en France après 1945 pose tout d’abord la question des différentes représentations de ce pays chez les rescapés. Le nombre important de métaphores spatiales interroge plus particulièrement le rôle de l’espace, matériel/urbain ou symbolique, dans la mémoire des émigrants et dans la reconstruction d’une Heimat souvent imaginaire. Après la guerre, cet attachement souvent ambivalent à l’Allemagne comme patri...

  19. Analysis of MSGTR events for APR1400 by means of best estimate thermal-hydraulic system code

    International Nuclear Information System (INIS)

    Jeong, Ji Hwan; Kim, Sang Jae; Chang, Keun Sun; Lee, Jae Hun

    2001-01-01

    A multiple steam generator tube rupture (MSGTR) event has never occurred in the history of commercial nuclear reactor operation while single steam generator tube rupture (SGTR) event is reported to occur every two years. As there is no history of MSGTR event, the understandings of transients and consequences of this event are not so much. In this study, a postulated MSGTR event in advanced power reactor 1400 (APR1400) is analyzed using thermal-hydraulic system code. The APR 1400 is a two-loop, 1000 MWe, PWR supposed to be built in 2009. MARS1.4 is used in this study. The present study aims to understand the effects of rupture location in heat transfer tubes and selection of affected steam generator following a MSGTR event. The effects of five tube rupture locations are compared with each other. The comparison shows that the response of APR1400 is to allow shortest time for operator action following a tubes rupture in the vicinity of hot-leg side tube sheet and to allow longest time following a tube ruptures at the tube top. The MSSV lift time for rupture at tube-top is evaluated as 24.5% larger than that for rupture at hot-leg side tube sheet. Also, the MSSV lift time for four cases are compared in order to examine how long operator response time is allowed depending on which steam generator is affected. The comparison shows that the cases for both of two steam generators are affected allow longer time for operator action compared with the cases that a single steam generator is affected. Further more, the tube ruptures in the steam generator where a pressurizer is linked leads to the shortest operator response time

  20. Real-Time PCR Quantification and Diversity Analysis of the Functional Genes aprA and dsrA of Sulfate-Reducing Prokaryotes in Marine Sediments of the Peru Continental Margin and the Black Sea.

    Science.gov (United States)

    Blazejak, Anna; Schippers, Axel

    2011-01-01

    Sulfate-reducing prokaryotes (SRP) are ubiquitous and quantitatively important members in many ecosystems, especially in marine sediments. However their abundance and diversity in subsurface marine sediments is poorly understood. In this study, the abundance and diversity of the functional genes for the enzymes adenosine 5'-phosphosulfate reductase (aprA) and dissimilatory sulfite reductase (dsrA) of SRP in marine sediments of the Peru continental margin and the Black Sea were analyzed, including samples from the deep biosphere (ODP site 1227). For aprA quantification a Q-PCR assay was designed and evaluated. Depth profiles of the aprA and dsrA copy numbers were almost equal for all sites. Gene copy numbers decreased concomitantly with depth from around 10(8)/g sediment close to the sediment surface to less than 10(5)/g sediment at 5 mbsf. The 16S rRNA gene copy numbers of total bacteria were much higher than those of the functional genes at all sediment depths and used to calculate the proportion of SRP to the total Bacteria. The aprA and dsrA copy numbers comprised in average 0.5-1% of the 16S rRNA gene copy numbers of total bacteria in the sediments up to a depth of ca. 40 mbsf. In the zone without detectable sulfate in the pore water from about 40-121 mbsf (Peru margin ODP site 1227), only dsrA (but not aprA) was detected with copy numbers of less than 10(4)/g sediment, comprising ca. 14% of the 16S rRNA gene copy numbers of total bacteria. In this zone, sulfate might be provided for SRP by anaerobic sulfide oxidation. Clone libraries of aprA showed that all isolated sequences originate from SRP showing a close relationship to aprA of characterized species or form a new cluster with only distant relation to aprA of isolated SRP. For dsrA a high diversity was detected, even up to 121 m sediment depth in the deep biosphere.

  1. The Experience of Staging Nijinsky's "L'Apres-Midi d'un Faune" in a Higher Education Dance Program

    Science.gov (United States)

    Curran, Tina

    2010-01-01

    This study documented the experiences of staging Vaslav Nijinsky's "L'Apres-midi d'un Faune" in a higher education dance program. The ballet was staged from Labanotation. Research questions focused on teaching and learning pedagogy, characterization of the process over time, experiences of the participants and teaching approaches. The project…

  2. Verification of SAMG entry condition for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Junghyun; Kim, Taewan; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    In the wake of the Fukushima accident, severe accident management has become important more than ever. While Emergency Operating Procedures (EOPs) focuses on cooling down the core during a design basis accident, the prime objective of severe accident management guideline (SAMG) is to prevent the release of radioactive material into the environment during a severe accident. Only one fixed value of core exit temperature (CET) has been applied for several decades to different types of nuclear power plants (NPPs) in Korea. Although the different types of NPPs have different cladding materials and system designs, the identical CET, i. e., 650 .deg. C, is applied as the entry condition to the SAMG of all the NPPs (except CANDU plants), i. e., Westinghouse type, OPR1000, and APR1400. In this paper, the transition point is re-evaluated for dominant severe accident sequences; station black-out (SBO), small break loss of coolant accident (SBLOCA), and me dium break loss of coolant accident (MBLOCA). In cases of SBO and SBLOCA, the current SAMG entry condition seems proper, while it needs to be reconsidered for MBLOCA case.

  3. Analysis Of Feedwater Line Break Of APR1400 By MARS Code

    International Nuclear Information System (INIS)

    Nguyen Thi Thanh Thuy; Le Dai Dien, Hoang Minh Giang

    2011-01-01

    This paper will deal with analysis of Feed water Line Break problem (FWLB) of the APR 1400 NPP with initial conditions: operation at 100% of power, double-ended break area of 0.058 m 2 and the break location of the feedwater line between the check valve and the steam generator. The analysis was simulated by MARS code through two step: calculation for steady state and calculation for transient state with initial condition mentioned. Some output result were presented with explanation: sequence of events corresponding to the time of the accident, the system behavior as temperature, pressure, steam generator water levels as well as DNBR, etc. before and after the accident. (author)

  4. Analysis Of Control Rod Ejection Of APR1400 By RELAP5

    International Nuclear Information System (INIS)

    Le Thi Thu; Hoang Minh Giang; Vo Thi Huong; Le Dai Dien

    2011-01-01

    This paper presents the analysis of Reactivity Induced Accident caused by ejection of a Control Element Assembly (CEA) from APR 1400 reactor vessel within 0.05 second. The initial condition were assumed as following: power level at 102%, delayed neutron fraction β = 412 pcm and CEA worth = 110 pcm. The analysis was simulated by RELAP5 code through two step: calculation of steady state and calculation of transient with initial condition mentioned as above. Some output results were presented with explanation: sequence of events corresponding to the time of the accident, the system behavior as power, reactivity feedback from fuel temperature changes (Doppler) as well as temperature, pressure, DNBR within 6 second of the accident. (author)

  5. Introduction to the study of an optimal control for irradiation loops of the reactor Pegase; Introduction a l'etude d'une commande optimale des boucles d'irradiation du reacteur Pegase

    Energy Technology Data Exchange (ETDEWEB)

    Guintrand, C [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1968-07-01

    The control system under consideration is made up of: a regulation unit consisting of a conventional nonlinear looped circuit for static tests, a cycling unit operating in open loop for dynamic tests. After a definition of a mathematical model for an irradiation loop, the behaviour of the regulation unit is studied, first of all theoretically using three-dimensional topological methods, and then by analogue simulation. A prototype unit is under construction and its principal characteristics are given. Finally, as far as the cycling unit is concerned, the first tests involving self-instruction technique, are described. (author) [French] Le systeme de commande envisage se compose de r: une unite de regulation se presentant sous la forme d'un circuit boucle classique non-lineaire, pour les essais statiques, une unite de cyclage fonctionnant en boucle ouverte, pour les essais dynamiques. Apres avoir defini un modele mathematique d'une boucle d'irradiation, on etudie le comportement de l'unite de regulation d'abord de facon theorique par les methodes topologiques a trois dimensions, puis par une simulation analogique. Une unite prototype est en cours de realisation, les principales caracteristiques en sont donnees. Enfin, en ce qui concerne l'unite de cyclage, les premiers essais effectues faisant appel aux techniques d'autoapprentissage, sont decrits. (auteur)

  6. Unit Risk Quotient (RQ) and Relative Significance of Radionuclide on Flora and Fauna to the EU-APR Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Keunsung [KHNP-CRI, Daejeon (Korea, Republic of); Kim, Sukhoon [FNC Technology Co., Ltd., Yongin (Korea, Republic of); Lee, Chonghui [KEPCO E and C, Yongin (Korea, Republic of)

    2015-05-15

    As part of the project for acquiring the certification from EUR organization, in accordance with Articles 4.8 and 5.5 specified in Section 2.20 of EUR Volume 2, the effects of ionizing radiation from the standard design of EU-APR on biota and ecosystems during operation and decommissioning phases shall be assessed. This assessment must be carried out according to the ERICA (i.e. Environmental Risk from Ionizing Contaminants: Assessment and management) integrated approach. This paper describes the evaluation results for unit risk quotient and relative significance by radionuclide derived from performing Tier 1 assessment on flora and fauna for the EU-APR design using ERICA Tool. As specified previously, Pa-231 and Th-228 are the most significant for the terrestrial and for the marine/freshwater ecosystems, respectively. And, in terms of environmental risk, those radionuclides having the most impact on flora and fauna are relatively more significant than isotope having the least impact by about 7 to 10 orders of magnitude.

  7. Unit Risk Quotient (RQ) and Relative Significance of Radionuclide on Flora and Fauna to the EU-APR Optimization

    International Nuclear Information System (INIS)

    Lee, Keunsung; Kim, Sukhoon; Lee, Chonghui

    2015-01-01

    As part of the project for acquiring the certification from EUR organization, in accordance with Articles 4.8 and 5.5 specified in Section 2.20 of EUR Volume 2, the effects of ionizing radiation from the standard design of EU-APR on biota and ecosystems during operation and decommissioning phases shall be assessed. This assessment must be carried out according to the ERICA (i.e. Environmental Risk from Ionizing Contaminants: Assessment and management) integrated approach. This paper describes the evaluation results for unit risk quotient and relative significance by radionuclide derived from performing Tier 1 assessment on flora and fauna for the EU-APR design using ERICA Tool. As specified previously, Pa-231 and Th-228 are the most significant for the terrestrial and for the marine/freshwater ecosystems, respectively. And, in terms of environmental risk, those radionuclides having the most impact on flora and fauna are relatively more significant than isotope having the least impact by about 7 to 10 orders of magnitude

  8. CFD Analysis of Random Turbulent Flow Load in Steam Generator of APR1400 Under Normal Operation Condition

    International Nuclear Information System (INIS)

    Lim, Sang Gyu; You, Sung Chang; Kim, Han Gon

    2011-01-01

    Regulatory guide 1.20 revision 3 of the Nuclear Regulatory Committee (NRC) modifies guidance for vibration assessments of reactor internals and steam generator internals. The new guidance requires applicants to provide a preliminary analysis and evaluation of the design and performance of a facility, including the safety margins of during normal operation and transient conditions anticipated during the life of the facility. Especially, revision 3 require rigorous assessments of adverse flow effects in the steam dryer cased by flow-excited acoustic and structural resonances such as the abnormality from power-uprated BWR cases. For two nearly identical nuclear power plants, the steam system of one BWR plant experienced failure of steam dryers and the main steam system components when steam flow was increased by 16 percent for extended power uprate (EPU). The mechanisms of those failures have revealed that a small adverse flow changing from the prototype condition induced severe flow-excited acoustic and structural resonances, leading to structural failures. In accordance with the historical background, therefore, potential adverse flow effects should be evaluated rigorously for steam generator internals in both BWR and Pressurized Water Reactor (PWR). The Advanced Power Reactor 1400 (APR1400), an evolutionary light water reactor, increased the power by 7.7 percent from the design of the 'Valid Prototype', System80+. Thus, reliable evaluations of potential adverse flow effects on the steam generator of APR1400 are necessary according to the regulatory guide. This paper is part of the computational fluid dynamics (CFD) analysis results for evaluation of the adverse flow effect for the steam generator internals of APR1400, including a series of sensitivity analyses to enhance the reliability of CFD analysis and an estimation the effect of flow loads on the internals of the steam generator under normal operation conditions

  9. Preliminary design of S-CO{sub 2} Brayton cycle for APR-1400 with power generation and desalination process

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Seong Jun; Lee, Won Woong; Jeong, Yong Hoon; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [KUSTAR, Abu Dhabi (United Arab Emirates)

    2015-10-15

    This study was conducted to explore the capabilities of the S-CO{sub 2} Brayton cycle for a cogeneration system for APR-1400 application. Three concepts of the S-CO{sub 2} simple recuperated co-generation cycle were designed. A supercritical CO{sub 2} (S-CO{sub 2}) Brayton cycle is recently receiving significant attention as a promising power conversion system in wide range of energy applications due to its high efficiency and compact footprint. The main reason why the S-CO{sub 2} Brayton cycle has these advantages is that the compressor operates near the critical point of CO{sub 2} (30.98 .deg. C, 7.38MPa) to reduce the compression work significantly compared to the other Brayton cycles. In this study, the concept of replacing the entire steam cycle of APR-1400 with the S-CO{sub 2} Brayton cycle is evaluated. The power generation purpose S-CO{sub 2} Brayton cycles are redesigned to generate power and provide heat to the desalination system at the same time. The performance of these newly suggested cycles are evaluated in this paper. The target was to deliver 147MW heat to the desalination process. The thermal efficiencies of the three concepts are not significantly different, but the 3{sup rd} concept is relatively simpler than other cycles because only an additional heat exchanger is required. Although the 2{sup nd} concept is relatively complicated in comparison to other concepts, the temperatures at the inlet and outlet of the DHX are higher than that of the others. As shown in the results, the S-CO{sub 2} Brayton cycles are not easy to outperform the steam cycle with very simple layout and general design points under APR-1400 operating condition. However, this study shows that the S-CO{sub 2} Brayton cycles can be designed as a co-generation cycle while producing the target desalination heat with a simple configuration. In addition, it was also found that the S-CO{sub 2} Brayton cycle can achieve higher cycle thermal efficiency than the steam power cycle under

  10. Best-estimated multi-dimensional calculation during LB LOCA for APR1400

    International Nuclear Information System (INIS)

    Oh, D. Y.; Bang, Y. S.; Cheong, A. J.; Woong, S.; Korea, W.

    2010-01-01

    Best-estimated (BE) calculation with uncertainty quantification for the emergency core cooling system (ECCS) performance analysis during Loss of Coolant Accident (LOCA) is more broadly used in nuclear industries and regulations. In Korea, demand on regulatory audit calculation is continuously increasing to support the safety review for life extension, power up-rating and advanced nuclear reactor design. The thermal-hydraulic system code, MARS (Multi-dimensional Analysis of Reactor Safety), with multi-dimensional capability is used for audit calculation. It achieves to describe the complicated phenomena in reactor coolant system by very effectively consolidating the one dimensional RELAP5/MOD3 with the multidimensional COBRA-TF codes. The advanced power reactors (APR1400) to be evaluated has four separated hydraulic trains of the high pressure injection system (HPSI) with direct vessel injection (DVI) which is different from the existing commercial PWRs. Also, the therma-hydraulic behavior of DVI plant would be considerably different from that of a cold-leg safety injection since the low pressure safety injection system are eliminated and the high pressure safety flow are injected into the specific elevation of reactor vessel downcomer. The ECCS bypass induced by the downcomer boiling due to hot wall heating of reactor vessel during reflooding phase is one of the important phenomena which should be considered in DVI plants. Therefore, in this study, BE calculation with one-dimensional (1-D) and multi-dimensional (multi-D) MARS models during LBLOCA are performed for APR1400 plant. In the multi-D evaluation, the reactor vessel is modeled by multi-D components and the specific treatment of flow path inside reactor vessel, e.g., upper guide structure, is essential. The concept of hot zone is adopted to simulate the limiting thermal-hydraulic conditions surrounding hot rod, which is similar to hot channel in 1-D. Also, alternative treatment of the hot rods in multi-D is

  11. A combination of p53-activating APR-246 and phosphatidylserine-targeting antibody potently inhibits tumor development in hormone-dependent mutant p53-expressing breast cancer xenografts

    Directory of Open Access Journals (Sweden)

    Liang Y

    2018-03-01

    Full Text Available Yayun Liang,1 Benford Mafuvadze,1 Cynthia Besch-Williford,2 Salman M Hyder1 1Deparment of Biomedical Sciences and Dalton Cardiovascular Research Center, Columbia, MO, USA; 2IDEXX BioResearch, Columbia, MO, USA Background: Between 30 and 40% of human breast cancers express a defective tumor suppressor p53 gene. Wild-type p53 tumor suppressor protein promotes cell-cycle arrest and apoptosis and inhibits vascular endothelial growth factor–dependent angiogenesis, whereas mutant p53 protein (mtp53 lacks these functions, resulting in tumor cell survival and metastasis. Restoration of p53 function is therefore a promising drug-targeted strategy for combating mtp53-expressing breast cancer. Methods: In this study, we sought to determine whether administration of APR-246, a small-molecule drug that restores p53 function, in combination with 2aG4, an antibody that targets phosphatidylserine residues on tumor blood vessels and disrupts tumor vasculature, effectively inhibits advanced hormone-dependent breast cancer tumor growth. Results: APR-246 reduced cell viability in mtp53-expressing BT-474 and T47-D human breast cancer cells in vitro, and significantly induced apoptosis in a dose-dependent manner. However, APR-246 did not reduce cell viability in MCF-7 breast cancer cells, which express wild-type p53. We next examined APR-246’s anti-tumor effects in vivo using BT-474 and T47-D tumor xenografts established in female nude mice. Tumor-bearing mice were treated with APR-246 and/or 2aG4 and tumor volume followed over time. Tumor growth was more effectively suppressed by combination treatment than by either agent alone, and combination therapy completely eradicated some tumors. Immunohistochemistry analysis of tumor tissue sections demonstrated that combination therapy more effectively induced apoptosis and reduced cell proliferation in tumor xenografts than either agent alone. Importantly, combination therapy dramatically reduced the density of blood

  12. Chemical transformations associated with neutronic irradiation of telluric acid; Transformations chimiques associees a l'irradiation neutronique de l'acide teliurique

    Energy Technology Data Exchange (ETDEWEB)

    Bertet, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-01-15

    transitions isomeriques {sup 131m}Te{sup VI} {yields} {sup 131}Te et {sup 129m}Te{sup VI} {yields} {sup 129}Te, ainsi que les etats d'oxydation de {sup 131}I apres desintegration {sup 131}Te {yields} {sup 131}I. L'existence d'un effet Szilard et Chalmers a ete mise en evidence. On a montre que l'etat isomerique de Rd-Te influe sur la valeur de la retention (R), celle-ci etant particulierement elevee pour les isomeres metastables. La retention croit encore avec la duree de l'irradiation. Elle semble independante du milieu de dissolution si l'acide tellurique est irradie a l'etat cristallise; elle augmente lorsqu'il est irradie en solution neutre ou alcaline, mais diminue en solution acide. La retention R{sub i} des isomeres fondamentaux {sup 131}Te{sup VI} et {sup 129}Te{sup VI}, formes par transition isomerique, varie avec le pH du milieu. Par exemple, pour l'isotope {sup 129}Te, R{sub i} croit de 40 pour cent a 80 pour cent lorsqu'on passe d'une solution chlorhydrique 3M a une solution sadique 6M. La repartition de {sup 131}I entre les trois fractions: 'reduite' (I{sup -}, IO{sup -}, I{sub 2}), iodate et periodate, depend du milieu de dissolution, que l'acide ait ete irradie a l'etat cristallise ou dissous. Dans le premier cas, le pourcentage de la forme reduite est de 12, 44 ou 89 pour cent respectivement en milieu neutre, alcalin (KOH 0,5 M) ou acide (HNO{sub 3} 0,8 M); dans le second cas, il est de 64 pour cent en solution alcaline, et atteint 90 pour cent en milieu neutre ou acide. On a enfin caracterise la formation, dans certain cas, de Te{sup VI} microchimique. (auteur)

  13. Comparison of APR1400 safety between brake site and shin-Kori site Due to the difference in the climate conditions

    International Nuclear Information System (INIS)

    Yoon, Ho Joon; Lee, Jeong Ik; Lee, Jeong Ik

    2012-01-01

    Brake Nuclear Power Plant (BNPP) is now under the construction based on APR1400 designed by Korean Electric Power Corporation (KEPCO). APR1400 is a two loop pressurized water reactor, the nuclear steam supply system (NSSS) US designed for about put of 4,000 MWt, with a corresponding electrical output of approximately 1,390 MWe. The first APR1400 (SKN 3 and 4) constructed in Shin-Kori, Korea has been modified according to the surrounding environment of the United Arab Emirates. In this paper, authors would like to compare safety issues between B NPP and Skin due to the changes of surroundings, since the site characteristics are very different. For instance, the mean annual air temperature in the UAE is 28 .deg. C and the peak air temperature was recorded as 48.8 .deg. C. Sea temperatures are varying from 17. deg. C in January to 35. deg. C in August, while that of Korea is in 9-16. deg. C range. Hot climate of UAE and the malfunction of HVAC system can lead the increasing of the water temperature in safety injection system (SIS). The heated water in SIS may affect the safety margin of the peak cladding temperature (PCT). The change of PCT and response time according to design basis accident scenarios such as large break LOCA are analyzed in detail. To evaluate such effect, Mars code was utilized to evaluate assumed condition by KAIST and the analyses of the results were carried out by Khalifa Univ.

  14. Réduction des pertes de mangues après la récolte en Asie du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 avr. 2016 ... Près de 70 % de la production mondiale de mangues provient de l'Inde, mais les pertes après récolte en raison d'une manutention, d'un transport et d'une transformation inadéquats peuvent atteindre 35 %. De plus, les prix obtenus par les producteurs sont souvent peu élevés à cause de la saturation du ...

  15. Le don après un décès d'origine cardiocirculatoire au Canada

    Science.gov (United States)

    Shemie, Sam D.; Baker, Andrew J.; Knoll, Greg; Wall, William; Rocker, Graeme; Howes, Daniel; Davidson, Janet; Pagliarello, Joe; Chambers-Evans, Jane; Cockfield, Sandra; Farrell, Catherine; Glannon, Walter; Gourlay, William; Grant, David; Langevin, Stéphan; Wheelock, Brian; Young, Kimberly; Dossetor, John

    2006-01-01

    Résumé Ces recommandations sont le fruit d'un processus multidisciplinaire national ayant duré un an et visant à déterminer si et comment l'on pourrait procéder au don d'organes après un décès d'origine cardiocirculatoire («don après le décès cardiocirculatoire», ou DDC) au Canada. Le forum national organisé en février 2005 a permis aux participants de discuter et d'élaborer des recommandations sur les principes, interventions et pratiques se rapportant au DDC. Les aspects éthiques et juridiques ont été abordés dans les discussions. À la fin du Forum, la majorité des participants ont été favorables à l'implantation de programmes de DDC au Canada. Les participants du Forum ont également convenu qu'il fallait formuler et prôner des valeurs fondamentales pour orienter l'élaboration de programmes et de protocoles basés sur le cadre médical, éthique et juridique établi lors de cette réunion. Même si la possibilité d'un don d'organes et de tissus doit faire partie intégrante des soins de fin de vie, il faut insister sur le fait que le devoir de diligence envers les patients mourants et leurs familles doit demeurer la priorité des équipes soignantes. La complexité et les répercussions profondes du décès sont reconnues et doivent être respectées, de même que les différences personnelles, ethnoculturelles et religieuses face à la mort et au don d'organes. Les décisions d'arrêter le traitement de maintien des fonctions vitales, la prise en charge des derniers moments de la vie et le diagnostic de décès selon des critères cardiocirculatoires doivent être distincts et indépendants des processus de don et transplantation. Ce rapport contient des recommandations destinées aux gestionnaires de program, aux autorités sanitaires régionales et aux instances appelés à élaborer les protocoles de DDC. Les programmes doivent être conçus en fonction des éléments suivants : direction et planification locales, éducation et

  16. Preliminary Analysis of Ex-Vessel Steam Explosion using TEXAS-V code for APR1400

    International Nuclear Information System (INIS)

    Song, Sung Chu; Lee, Jung Jae; Cho, Yong Jin; Hwang, Taesuk

    2013-01-01

    The purpose of this study is to explore input development and the audit calculation using TEXAS-V code for ex-vessel steam explosion for a flooded reactor cavity of APR1400. TEXAS computational models are one of the simplified tools for simulations of fuel-coolant interaction during mixing, triggering and explosion phase. The models of TEXAS code were validated by performing the fundamental experimental investigation in the KROTOS facility at JRC, Ispra. The experiments such as KROTOS and FARO experiment are aimed at providing benchmark data to examine the effect of fuel-coolant initial conditions and mixing on explosion energetics with alumina and prototypical core material. TEXAS-V code used in this study was to analyze and predict the ex-vessel steam explosion for a reactor scale. The input deck to simulate the flooded reactor cavity of APR1400 is developed and base case calculation is performed. This study will provide a base for further study. The code will be of use for the evaluation and sensitivity study of ex-vessel steam explosion for ERVC strategy in the future studies. Analysis result of this study is similar to the result of other study. Through this study, it is found that TEXAS-V could be the used as a tool for predicting the steam explosion load on a reactor scale, as fast running computer code. In addition, TEXAS-V code could be to evaluate the impact of various uncertainties, which are not clearly understood yet, to provide a conservative envelope for the steam explosion

  17. Preliminary Analysis of Ex-Vessel Steam Explosion using TEXAS-V code for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Chu; Lee, Jung Jae; Cho, Yong Jin; Hwang, Taesuk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    The purpose of this study is to explore input development and the audit calculation using TEXAS-V code for ex-vessel steam explosion for a flooded reactor cavity of APR1400. TEXAS computational models are one of the simplified tools for simulations of fuel-coolant interaction during mixing, triggering and explosion phase. The models of TEXAS code were validated by performing the fundamental experimental investigation in the KROTOS facility at JRC, Ispra. The experiments such as KROTOS and FARO experiment are aimed at providing benchmark data to examine the effect of fuel-coolant initial conditions and mixing on explosion energetics with alumina and prototypical core material. TEXAS-V code used in this study was to analyze and predict the ex-vessel steam explosion for a reactor scale. The input deck to simulate the flooded reactor cavity of APR1400 is developed and base case calculation is performed. This study will provide a base for further study. The code will be of use for the evaluation and sensitivity study of ex-vessel steam explosion for ERVC strategy in the future studies. Analysis result of this study is similar to the result of other study. Through this study, it is found that TEXAS-V could be the used as a tool for predicting the steam explosion load on a reactor scale, as fast running computer code. In addition, TEXAS-V code could be to evaluate the impact of various uncertainties, which are not clearly understood yet, to provide a conservative envelope for the steam explosion.

  18. Reliability analysis of protection system of advanced pressurized water reactor - APR 1400

    International Nuclear Information System (INIS)

    Varde, P. V.; Choi, J. G.; Lee, D. Y.; Han, J. B.

    2003-04-01

    Reliability analysis was carried out for the protection system of the Korean Advanced Pressurized Water Reactor - APR 1400. The main focus of this study was the reliability analysis of digital protection system, however, towards giving an integrated statement of complete protection reliability an attempt has been made to include the shutdown devices and other related aspects based on the information available to date. The sensitivity analysis has been carried out for the critical components / functions in the system. Other aspects like importance analysis and human error reliability for the critical human actions form part of this work. The framework provided by this study and the results obtained shows that this analysis has potential to be utilized as part of risk informed approach for future design / regulatory applications

  19. Analysis of a 12-Finger Rod Drop using RETRAN/MASTER Code System for APR1400

    International Nuclear Information System (INIS)

    Yu, Keuk Jong; You, Sung Chang; Kim, Han Gon

    2009-01-01

    The Optimized Power Reactor 1000 (OPR1000) has 4-finger and 12-finger Control Element Assemblies (CEAs). When the 12-finger CEA is dropped, Core Protection Calculator System (CPCS) shuts down the reactor to prevent fuel damage that could occur from the sudden reactor power peaking. By contrast, the improved CPCS of Advanced Power Reactor 1400 (APR1400), which has systems similar to those of the OPR1000, decreases reactor power rapidly using its Reactor Power Cutback System (RPCS) to avoid unwanted reactor trips caused by the CPCS during a 12- finger CEA drop event. RETRAN is a best-estimate code for transient analysis of Non-LOCA. The RETRAN control logic, which includes the function of reducing reactor power during a 12-Finger CEA drop, has been developed for the APR1400. A MATRAN program has also been developed. MATRAN is the interface program for realtime processing to connect RETRAN with MASTER code which is a nuclear analysis and design code. MATRAN supplies adequate feedback reactivities from the MASTER code to RETRAN code. The purpose of this study is to analyze the behavior of a nuclear reactor core and its primary system using conventional RETRAN analysis procedure and MATRAN program analysis procedure during a 12- finger CEA drop. In addition, the axial power distribution and Axial Shape Index (ASI) are produced by the MATRAN program and they are confirmed as within operation limits

  20. The Analysis of Uncontrolled CEA Bank withdrawal from low power Accident for APR1400 Using KNAP

    International Nuclear Information System (INIS)

    Yang, Chang-Keun; Kim, Yo-Han; Ha, Sang-Jun

    2006-01-01

    In Korea, the nuclear industries such as fuel manufacturer, the architect engineer and the utility, have been using the methodologies and codes of vendors, such as Westinghouse(WH), Combustion Engineering(CE), for the safety analyses of nuclear power plants. Consequently the industries have kept up the many organizations to operate the methodologies and to maintain the codes for each vendor. It may cause difficulty to improve the safety analyses efficiency and technology related. So, the necessity another of methodologies and code systems applicable to Non- LOCA, beyond design basis accident and performance analyses for all types of pressurized water reactor (PWR) has been raised. As the first requirement, the best-estimate codes were required for applicable wider application area and realistic behavior prediction of power plants with various and sophisticated functions. After the review on several candidates, RETRAN-3D has been chosen as a system analysis code. The draft version of the methodology was developed based on the references for the general purpose, and modified to apply it to specific plants in Korea. As a part of the feasibility estimation for the methodology and code system, uncontrolled CEA bank withdrawal from low power accident for the Advanced Power Reactor 1400(APR1400) was selected to verify the feasibility using the RETRAN-3D. And the results were compared with the Standard Safety Analysis Reports (SSAR) of APR1400

  1. Performance Assessment of Turbulence Models for the Prediction of the Reactor Internal Flow in the Scale-down APR+

    International Nuclear Information System (INIS)

    Lee, Gonghee; Bang, Youngseok; Woo, Swengwoong; Kim, Dohyeong; Kang, Minku

    2013-01-01

    The types of errors in CFD simulation can be divided into the two main categories: numerical errors and model errors. Turbulence model is one of the important sources for model errors. In this study, in order to assess the prediction performance of Reynolds-averaged Navier-Stokes (RANS)-based two equations turbulence models for the analysis of flow distribution inside a 1/5 scale-down APR+, the simulation was conducted with the commercial CFD software, ANSYS CFX V. 14. In this study, in order to assess the prediction performance of turbulence models for the analysis of flow distribution inside a 1/5 scale-down APR+, the simulation was conducted with the commercial CFD software, ANSYS CFX V. 14. Both standard k-ε model and SST model predicted the similar flow pattern inside reactor. Therefore it was concluded that the prediction performance of both turbulence models was nearly same. Complex thermal-hydraulic characteristics exist inside reactor because the reactor internals consist of fuel assembly, control rod assembly, and the internal structures. Either flow distribution test for the scale-down reactor model or computational fluid dynamics (CFD) simulation have been conducted to understand these complex thermal-hydraulic features inside reactor

  2. Réduction des pertes de mangues après la récolte en Asie du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 avr. 2016 ... On a également conçu des boîtes spéciales contenant de la fibre de banane imprégnée d'hexanal, dont l'utilisation pour le transport de la mangue permet de conserver le fruit beaucoup plus longtemps. Réduction des pertes de mangues après la récolte en Asie du Sud​ (PDF, 506 Ko). Il s'agit de l'une ...

  3. Minimum containment pressure and its effect on ECCS performance of APR-1400

    International Nuclear Information System (INIS)

    Kim, In Goo; Bang, Young S.; Kim, Hho Jung

    2004-01-01

    The containment pressure has a strong effect on the late reheat behavior for a large break LOCA, associated with the DVI issue. The downcomer boiling, which occurs during the post-reflood phase, has a negative effect on core cooling for a LBLOCA. Because the downcomer boiling is enhanced as the containment pressure decreases, how to determine containment pressure is important to the evaluation of ECCS performance. In spite of its importance of containment pressure, there are few studies on the containment pressure and the interaction between RCS and containment thermal hydraulics. To have a better knowledge of the effect of containment pressure on APR-1400 ECCS performance, a parametric study for containment pressure has been carried out. Also, the interaction between RCS and containment behavior has been also investigated

  4. Use case driven approach to develop simulation model for PCS of APR1400 simulator

    International Nuclear Information System (INIS)

    Dong Wook, Kim; Hong Soo, Kim; Hyeon Tae, Kang; Byung Hwan, Bae

    2006-01-01

    The full-scope simulator is being developed to evaluate specific design feature and to support the iterative design and validation in the Man-Machine Interface System (MMIS) design of Advanced Power Reactor (APR) 1400. The simulator consists of process model, control logic model, and MMI for the APR1400 as well as the Power Control System (PCS). In this paper, a use case driven approach is proposed to develop a simulation model for PCS. In this approach, a system is considered from the point of view of its users. User's view of the system is based on interactions with the system and the resultant responses. In use case driven approach, we initially consider the system as a black box and look at its interactions with the users. From these interactions, use cases of the system are identified. Then the system is modeled using these use cases as functions. Lower levels expand the functionalities of each of these use cases. Hence, starting from the topmost level view of the system, we proceeded down to the lowest level (the internal view of the system). The model of the system thus developed is use case driven. This paper will introduce the functionality of the PCS simulation model, including a requirement analysis based on use case and the validation result of development of PCS model. The PCS simulation model using use case will be first used during the full-scope simulator development for nuclear power plant and will be supplied to Shin-Kori 3 and 4 plant. The use case based simulation model development can be useful for the design and implementation of simulation models. (authors)

  5. Multi-analytical characterisation of D’Aprés Cormon by José Veloso Salgado

    Energy Technology Data Exchange (ETDEWEB)

    Cardeira, A.M. [Faculdade de Belas-Artes da Universidade de Lisboa, Largo da Academia Nacional de Belas-Artes, 1249-058 Lisboa (Portugal); Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Longelin, S. [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Costa, S.; Candeias, A. [Laboratório José de Figueiredo, Direcção Geral do Património Cultural, Rua das Janelas Verdes 37, 1249-018 Lisboa (Portugal); Laboratório HERCULES e Centro de Química de Évora, Universidade de Évora, Largo Marquês de Marialva 8, 7000 Évora (Portugal); Carvalho, M.L. [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Manso, M., E-mail: marta974@cii.fc.ul.pt [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal)

    2014-07-15

    This case study reveals the analytical characterisation carried out on ‘D’Aprés Cormon’ (1891) by Veloso Salgado, a copy of ‘Caïn’ (1880) by Fernando Cormon, belonging nowadays to Musée d’Orsay. Infrared Reflectography made in situ revealed underdrawing grid that was used to transpose the original painting to a smaller scale, pictorial style, execution method and retouched/restored areas. In situ EDXRF analysis together with Raman microscopy allowed the identification of gypsum, lead white, titanium white, yellow ochre, vermilion, ultramarine and lamp black. These results provide valuable information about the Salgado’s palette and his production technique.

  6. Detection of irradiated spice in blend of irradiated and un-irradiated spices using thermoluminescence method

    International Nuclear Information System (INIS)

    Goto, Michiko; Yamazaki, Masao; Sekiguchi, Masayuki; Todoriki, Setsuko; Miyahara, Makoto

    2007-01-01

    Five blended spice sample were prepared by mixing irradiated and un-irradiated black pepper and paprika at different ratios. Blended black pepper containing 2%(w/w) of 5.4 kGy-irradiated black pepper showed no maximum at glow1. Irradiated black pepper samples, mixed to 5 or 10%(w/w), were identified as 'irradiated' or 'partially irradiated' or 'un-irradiated'. All samples with un-irradiated pepper up to 20%(w/w) were identified as irradiated'. In the case 5.0 kGy-irradiated paprika were mixed with un-irradiated paprika up to 5%(w/w), all samples were identified as irradiated'. The glow1 curves of samples, including irradiated paprika at 0.2%(w/w) or higher, exhibited a maximum between 150 and 250degC. The results suggest the existence of different critical mixing ratio for the detection of irradiation among each spices. Temperature range for integration of the TL glow intensity were compared between 70-400degC and approximate 150-250degC, and revealed that the latter temperature range was determined based on the measurement of TLD100. Although TL glow ratio in 150-250degC was lower than that of 70-400degC range, identification of irradiation was not affected. Treatment of un-irradiated black pepper and paprika with ultraviolet rays had no effect on the detection of irradiation. (author)

  7. Appraisal of the Psychiatric Diagnostic Screening Questionnaire in a perinatal cohort: The APrON study.

    Science.gov (United States)

    Leung, Brenda; Letourneau, Nicole; Bright, Katherine; Giesbrecht, Gerald F; Ntanda, Henry; Gagnon, Lisa

    2017-08-01

    Depression and anxiety are routinely screened as part of perinatal care. However, other Axis 1 disorders and specific anxiety disorders are less likely to be screened or assessed as part of obstetric care. The objective of this study was to determine whether the Psychiatric Diagnostic Screening Questionnaire (PDSQ) is a potentially useful tool to screen for psychiatric conditions in pregnant and postpartum women in a community setting. We compared the prevalence of DSM Axis I disorders obtained on the PDSQ with: (1) the prevalence of these disorders reported in previous studies of pregnant and postpartum women, and (2) scores obtained on the Edinburgh Postpartum Depression Scale (EPDS) and the Symptom Checklist-90-Revised (SCL-90R) anxiety scale. Data were obtained from the Alberta Pregnancy Outcomes and Nutrition (APrON) study. The PDSQ was completed by 1575 women prenatally and 1481 postnatally. The three most prevalent PDSQ conditions were social phobia, somatic disorder, and obsessive-compulsive disorder (OCD). The prevalence of social phobia, alcohol disorder, OCD and psychosis were higher in the APrON cohort compared with statistics in the literature. The proportion of women meeting depression and anxiety cut-offs on the PDSQ were lower than for the EPDS and the SCL-90R. The Cohens Kappa index ( k) indicated poor to fair agreement between the measures in classifying pregnant women as depressed or anxious. The PDSQ subscales may not be appropriate for the pregnant population. Research into instruments more specific to pregnant and postpartum women are needed to determine the prevalence of psychiatric disorders in this population.

  8. Low field leakage current on ultra-thin gate oxides after ion or electron beam irradiations; Courant de fuite aux champs faibles d'oxydes ultra-minces apres irradiations avec des faisceaux d'ions et d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Ceschia, M.; Paccagnella, A.; Sandrin, S. [Universita di Padova, Dipt. di Elettronica e Informatica, Padova (Italy); Paccagnella, A. [Istituto Nazionale per la Fisica della Materia, INFM, Unita di Padova (Italy); Ghidini, G. [ST-Microelectronics, Agrate Brianza (Italy); Wyss, J. [Universita di Padova, Dipt. di Fisica, Padova (Italy)

    1999-07-01

    In contemporary CMOS 0.25-{mu}m technologies, the MOS gate oxide (thickness {approx_equal} 5 nm) shows a low-field leakage current after radiation stresses, i.e. the radiation induced leakage current (RILC). RILC is generally attributed to a trap assisted tunneling (TAT) of electrons through neutral oxide traps generated by radiation stress. RILC has been investigated on ultra-thin oxides irradiated with 158 MeV {sup 28}Si ions or 8 MeV electrons. 3 main results are worth being quoted: 1) ion or electron beam irradiation can produce RILC with similar characteristics. Even the dose dependence of RILC is similar in the 2 cases, despite the large LET difference (about a factor of 10{sup +4}), 2) RILC is not a constant as a function of time, it tends to decrease when an oxide field (few MV/cm) is applied for (tens of) thousands seconds. On the other hand, RILC stays constant in devices kept at low bias, and 3) if a pulsed gate voltage is applied during irradiation, RILC is reduced with respect to the zero-field case. (A.C.)

  9. Precificação de consultoria empresarial com a contribuição das estratégias de apreçamento = Entrepreneurial Counseling Pricing with Pricing Strategy Contribution

    OpenAIRE

    Nivaldo João dos Santos; Erves Ducati; Antonio Cezar Bornia

    2008-01-01

    A precificação de serviços de consultoria também pode se beneficiar dos conceitos e idéias das estratégias de apreçamento de bens de consumo de massa, especificamente na área de consultoria de gestão empresarial. Apesar deste campo ser dominado por grandes corporações multinacionais, ainda existe espaço para empresas e profissionais nacionais. Por se tratar de mercado que envolve valores de grande magnitude, imaginasse que as instituições de sucesso adotem estratégia de apreçamento. Neste tra...

  10. Contrôle hormonal des caractéristiques des fibres musculaires après la naissance

    OpenAIRE

    Cassar-Malek, Isabelle; Listrat, Anne; Picard, Brigitte

    1998-01-01

    Après la naissance, la croissance et les propriétés contractiles et métaboliques des fibres musculaires sont soumises à une régulation endocrinienne complexe. A l’exception des glucocorticoïdes, la plupart des hormones présente une action anabolique sur le tissu musculaire. Leur influence sur les caractéristiques des fibres est cependant très différente. Ainsi, les hormones somatotropes affectent peu la composition en fibres des muscles. La GH, comme l’IGF-1, régulerait cependant l’expression...

  11. Apreçamento de opções de IDI usando o modelo CIR

    Directory of Open Access Journals (Sweden)

    José Santiago Fajardo Barbachan

    2003-06-01

    Full Text Available A opção de IDI da BM&F possui características peculiares que torna o seu apreçamento diferente das opções de taxa de juros mais comuns, como as de títulos de renda fixa. Este artigo desenvolve uma fórmula para apreçamento dessas opções de IDI, utilizando a precificação livre de arbitragem. O modelo utilizado considera apenas um fator estocástico: a taxa de juros livre de risco de curto prazo. A equação diferencial usada para modelar o comportamento da taxa de juros é a do modelo CIR (COX INGERSOLL & ROSS, 1985, que possui reversão à média e não permite a existência de taxas de juros nominais negativas. Também é feita uma estimação dos parâmetros do modelo proposto baseando-se em dados históricos, para então comparar o preço teórico da opção baseado nestes parâmetros com os preços de mercado e com o preço teórico considerando a modelagem de Vasicek (1977.The IDI option from the BM&F (Commodities and Futures Exchange has unusual characteristics, that make its pricing different from common interest rate options. This paper develops a closed form formula for the pricing of these IDI options, using an arbitrage-free pricing approach. The model used considers only one stochastic factor: the short-term risk-free interest rate. The differential equation used to model the behavior of the interest rate comes from the CIR (COX INGERSOLL & ROSS, 1985 model, which has mean reversion property and does not allow negative nominal interest rates. It is also done a parameter estimation of the proposed model based on historic data, and then compares the theoretical price of the option based on these parameters with the market price and with the theoretical price considering the Vasicek (1977 model.

  12. Análise do efeito não linear do patrimônio líquido no apreçamento de fundos de investimento em ações

    Directory of Open Access Journals (Sweden)

    Paulo Rogério Faustino Matos

    2012-01-01

    Full Text Available Este artigo faz uso do Capital Asset Pricing Model (CAPM, em sua versão canônica e com extensões não lineares, visando a apreçar um painel de 75 fundos de investimento em ações no Brasil, ao longo dos últimos 11 anos. O resultado sugere que a versão linear desse arcabouço não seja capaz de apreçar ou de prever retornos reais de fundos que possuam elevados patrimônio líquido (PL e outperformance, em relação ao índice da Bolsa de Valores de São Paulo (Ibovespa, corroborando evidências anteriores. A versão não linear com thresholds baseados no PL parece lidar melhor com a questão de alfas de Jensen significativos, apesar de ser estatisticamente indicada apenas para poucos fundos com elevado PL, mas baixa outperformance. Essa é uma evidência de que, apesar de o tamanho influenciar na gestão e, possivelmente, na performance de um fundo, a modelagem de apreçamento desse efeito deve ser feita linearmente.

  13. A MARS and MIDAS Linked Accident Simulation for Large LOCA in APR1400

    International Nuclear Information System (INIS)

    Choi, Young; Kim, K. R.; Kim, D. H.; Chung, B. D.

    2006-01-01

    A linked calculation utilizing the design-basis code MARS and the severe accident code MIDAS has been accomplished for a station blackout simulation in APR1400. The MARS code was developed by using the RELAP3/MOD3 and COBRA-TF codes, while the MIDAS code is currently under a development process using the MELCOR code. The objectives of this paper are to explain how to identify the MAR-MIDAS linked calculation outlines and the technical problems, including the MARS data transfer method, the MIDAS input generation works and so on. For the performance verification of the MARS-MIDAS linked calculation, the MARS, MIDAS and their linkage system are run independently for the same initiating event, so that their data can be compared with each other after the selection of proper variables

  14. An Investigation on Irradiation-induced Grid Width Growth in Advanced Fuels

    International Nuclear Information System (INIS)

    Jang, Young Ki; Jeon, Kyeong Lak; Kim, Yong Hwan; Kim, Jae Ik; Hwang, Sun Tack; Kim, Man Su; Lee, Tae Hyoung; Yoo, Myeong Jong; Yoon, Yong Bae; Kim, Tae Wan

    2011-01-01

    The spacer grids for fuel assembly are fabricated from preformed Zircaloy or Inconel strips interlocked in an egg crate fashion and welded or brazed together. The spacer grid is the important component to maintain the fuel rod array by providing positive lateral restraint to the fuel rods but only frictional restraint to axial fuel rod motion. To improve economy and safety aspects, advanced nuclear fuels of PLUS7, 16ACE7 and 17ACE7 were developed. The former is for Optimized Power Reactor of 1000 MWe (OPR1000) and Advanced Power Reactor of 1400 MWe (APR1400) and the latter two are for 16x16 and 17x17 Westinghouse type reactors, respectively. The material for top and bottom spacer grids on these advanced fuels are Inconel and the mid grids are Zirlo patented by Westinghouse. For neutron economy, the fuel assemblies are arranged very closely and the gaps between assemblies are kept to around 1 mm based on the worst case. The Zirconium-based alloys grow during irradiation in reactor. The large growth may cause some difficulties in loading and unloading fuel assemblies during refueling outage in reactor. The severe growth may cause some problems that fuel assemblies may be stuck within the core shroud and a modification of loading pattern is required. In addition, the grid growth with grid spring relaxation may cause different rod vibration behavior and results in the different wear mechanism. The grid width growth on the advanced fuels were predicted by using the growth models before the irradiation in reactor and were examined using lead test assemblies (LTAs) after each cycle in Ulchin unit 3 and Kori units 2 and 3, respectively. To reconfirm irradiation performance results using LTAs, the additional examinations are being performed through the surveillance programs on the commercially supplied fuels in Yonggwang unit 5 and Kori units 2 and 4. It is investigated on this study whether the grid widths on the advanced fuels meet their criteria and the predicted models

  15. Analysis on Containment Response Following a LBLOCA of APR1400

    International Nuclear Information System (INIS)

    Han, Kyu Hyun

    2016-01-01

    The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

  16. Analysis on Containment Response Following a LBLOCA of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kyu Hyun [KINS, Daejeon (Korea, Republic of)

    2016-05-15

    The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

  17. Irradiation probe and laboratory for irradiated material evaluation

    International Nuclear Information System (INIS)

    Smutny, S.; Kupca, L.; Beno, P.; Stubna, M.; Mrva, V.; Chmelo, P.

    1975-09-01

    The survey and assessment are given of the tasks carried out in the years 1971 to 1975 within the development of methods for structural materials irradiation and of a probe for the irradiation thereof in the A-1 reactor. The programme and implementation of laboratory tests of the irradiation probe are described. In the actual reactor irradiation, the pulse tube length between the pressure governor and the irradiation probe is approximately 20 m, the diameter is 2.2 mm. Temperature reaches 800 degC while the pressure control system operates at 20 degC. The laboratory tests (carried out at 20 degC) showed that the response time of the pressure control system to a stepwise pressure change in the irradiation probe from 0 to 22 at. is 0.5 s. Pressure changes were also studied in the irradiation probe and in the entire system resulting from temperature changes in the irradiation probe. Temperature distribution in the body of the irradiation probe heating furnace was determined. (B.S.)

  18. Chapter 2: Irradiators

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2018-04-01

    The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

  19. Radiosensitivity of chlorella after medium energy accelerated electron irradiation; Radiosensibilite des chlorelles aux electrons acceleres de moyenne energie

    Energy Technology Data Exchange (ETDEWEB)

    Roux, J C [commissariat a L' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1966-06-01

    The survival curves (capability of multiplication) of chlorella pyrenoidosa after irradiations can be used for soft electrons (0.65 and 1 MeV), hence penetrating into only 2 to 4 millimeters of water: the algae are laying on porous membranes and the doses are calculated from the power of the electron beam measured by the electric current on a metallic target or by Fricke's dosimetry. With these techniques, it is showed and discussed the part of anoxia in the radioprotection (magnitude or reduction of the dose calculated from the slope of survival curves: 2.5 ) that is more important than the restoration studied by the fractionation of the dose. The 0.65 and 1 MeV electrons have a biologic effect lesser than 180 keV X-rays (RBE - relative biological efficiency - calculated on the slope of survival curves is 0.92 in aerated irradiation, 0.56 in the deoxygenated irradiation). (author) [French] Les courbes de survie clonale (capacite de multiplication) de chlorella pyrenoidosa apres irradiation sont realisables meme avec des electrons peu energetiques (0.65 et 1 MeV), donc peu penetrants, par l'irradiation d'algues deposees sur membrane filtrante et grace au calcul de la dose a partir de l'energie du faisceau mesure par le courant que celui-ci cree dans une cible metallique ou par dosimetrie de Fricke. Par ces techniques, on a montre et discute le role de l'anoxie dans la radioprotection des chlorelles (facteur de reduction de la dose calcule sur la pente des courbes de survie de 2.5) qui est plus important que le pouvoir de restauration etudie par le fractionnement de la dose. Les electrons utilises ont un effet biologique moins grand que les rayons X de 180 keV (l'efficacite biologique relative - EBR - calculee sur la pente des courbes de survie est de 0.9 en presence d'air, 0.6 en presence d'azote)

  20. Irradiation and development of the nuclear emulsions exposed to intense fluxes of thermal neutrons with {gamma} rays; Irradiation et developpement des emulsions nucleaires exposees a des flux intenses de neutrons thermiques, accompagnes de rayons {gamma}

    Energy Technology Data Exchange (ETDEWEB)

    Faraggi, H; Bonnet, A; Cohen, J [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1952-07-01

    The thermal neutron fluxes provided by nuclear reactors permit the survey of relatively rare phenomenons, and dosage of very weak quantities of some elements. One of the most favorable detection technique are constituted by the use of the nuclear emulsions. one can mention: - the dosage of uranium by counting in the emulsion the number of traces due to fission fragments after irradiation. - The dosage of the lithium and the boron as trace amounts with the help of nuclear reactions (n, {alpha}) and thermal neutrons. - The research of reactions (n, {alpha}) or (n, p) of very weak cross section for middle or heavy elements. These different applications require however important neutrons fluxes. It had therefore obliged us to search for the most favorable irradiation and development of the emulsions conditions, to get the best visibility of the trajectories and decrease the phenomena of fog on the emulsion, which prevents any observation. (M.B.) [French] Les flux de neutrons thermiques fournis par les reacteurs nucleaires permettent l'etude de phenomenes relativement rares, et le dosage de tres faibles quantites de certains elements. Un des moyens de detection les plus favorables est constitue par l'utilisation des emulsions nucleaires. on peut citer: - le dosage de l'uranium par comptage dans l'emulsion du nombre de traces dues aux fragments de fission apres irradiation. - Le dosage du lithium et du bore a l'etat de traces a l'aide des reactions (n, {alpha}) sous l'action des neutrons thermiques. - La recherche de reactions (n,{alpha}) ou (n,p) de tres faible section efficace pour des elements moyens ou lourds. Ces differentes applications necessite cependant des flux de neutrons important. On a donc ete amene a rechercher les conditions les plus favorables d'irradiation et de developpement des emulsions, de maniere a obtenir la meilleure visibilite des trajectoires et diminuer les phenomenes de voile de l'emulsion, qui empeche toute observation. (M.B.)

  1. Irradiation and development of the nuclear emulsions exposed to intense fluxes of thermal neutrons with {gamma} rays; Irradiation et developpement des emulsions nucleaires exposees a des flux intenses de neutrons thermiques, accompagnes de rayons {gamma}

    Energy Technology Data Exchange (ETDEWEB)

    Faraggi, H.; Bonnet, A.; Cohen, J. [Commissariat a l' Energie Atomique, Lab. du Fort de Chatillon, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1952-07-01

    The thermal neutron fluxes provided by nuclear reactors permit the survey of relatively rare phenomenons, and dosage of very weak quantities of some elements. One of the most favorable detection technique are constituted by the use of the nuclear emulsions. one can mention: - the dosage of uranium by counting in the emulsion the number of traces due to fission fragments after irradiation. - The dosage of the lithium and the boron as trace amounts with the help of nuclear reactions (n, {alpha}) and thermal neutrons. - The research of reactions (n, {alpha}) or (n, p) of very weak cross section for middle or heavy elements. These different applications require however important neutrons fluxes. It had therefore obliged us to search for the most favorable irradiation and development of the emulsions conditions, to get the best visibility of the trajectories and decrease the phenomena of fog on the emulsion, which prevents any observation. (M.B.) [French] Les flux de neutrons thermiques fournis par les reacteurs nucleaires permettent l'etude de phenomenes relativement rares, et le dosage de tres faibles quantites de certains elements. Un des moyens de detection les plus favorables est constitue par l'utilisation des emulsions nucleaires. on peut citer: - le dosage de l'uranium par comptage dans l'emulsion du nombre de traces dues aux fragments de fission apres irradiation. - Le dosage du lithium et du bore a l'etat de traces a l'aide des reactions (n, {alpha}) sous l'action des neutrons thermiques. - La recherche de reactions (n,{alpha}) ou (n,p) de tres faible section efficace pour des elements moyens ou lourds. Ces differentes applications necessite cependant des flux de neutrons important. On a donc ete amene a rechercher les conditions les plus favorables d'irradiation et de developpement des emulsions, de maniere a obtenir la meilleure visibilite des trajectoires et diminuer les phenomenes de voile de l'emulsion, qui

  2. Real-time PCR quantification and diversity analysis of the functional genes aprA and dsrA of sulfate-reducing bacteria in marine sediments of the Peru continental margin and the Black Sea

    OpenAIRE

    Axel eSchippers; Anna eBlazejak

    2011-01-01

    A quantitative, real-time PCR (Q-PCR) assay for the functional gene adenosine 5´-phosphosulfate reductase (aprA) of sulfate-reducing bacteria (SRB) was designed. This assay was applied together with described Q-PCR assays for dissimilatory sulfite reductase (dsrA) and the 16S rRNA gene of total Bacteria to marine sediments from the Peru margin (0 – 121 meters below seafloor (mbsf)) and the Black Sea (0 – 6 mbsf). Clone libraries of aprA show that all isolated sequences originate from SRB...

  3. Short communication

    African Journals Online (AJOL)

    abp

    22 oct. 2013 ... Notre objectif est d'évaluer l'indice de masse corporelle (IMC) pour estimer les ... which permits unrestricted use, distribution, and reproduction in any medium, provided the .... Prs Annick Robinson, Olivat Rakoto Alson et.

  4. Food irradiation

    International Nuclear Information System (INIS)

    Sato, Tomotaro; Aoki, Shohei

    1976-01-01

    Definition and significance of food irradiation were described. The details of its development and present state were also described. The effect of the irradiation on Irish potatoes, onions, wiener sausages, kamaboko (boiled fish-paste), and mandarin oranges was evaluated; and healthiness of food irradiation was discussed. Studies of the irradiation equipment for Irish potatoes in a large-sized container, and the silo-typed irradiation equipment for rice and wheat were mentioned. Shihoro RI center in Hokkaido which was put to practical use for the irradiation of Irish potatoes was introduced. The state of permission of food irradiation in foreign countries in 1975 was introduced. As a view of the food irradiation in the future, its utilization for the prevention of epidemics due to imported foods was mentioned. (Serizawa, K.)

  5. Food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Gruenewald, T

    1985-01-01

    Food irradiation has become a matter of topical interest also in the Federal Republic of Germany following applications for exemptions concerning irradiation tests of spices. After risks to human health by irradiation doses up to a level sufficient for product pasteurization were excluded, irradiation now offers a method suitable primarily for the disinfestation of fruit and decontamination of frozen and dried food. Codex Alimentarius standards which refer also to supervision and dosimetry have been established; they should be adopted as national law. However, in the majority of cases where individual countries including EC member-countries so far permitted food irradiation, these standards were not yet used. Approved irradiation technique for industrial use is available. Several industrial food irradiation plants, partly working also on a contractual basis, are already in operation in various countries. Consumer response still is largely unknown; since irradiated food is labelled, consumption of irradiated food will be decided upon by consumers.

  6. Molecular analysis of the diversity of sulfate-reducing and sulfur-oxidizing prokaryotes in the environment, using aprA as functional marker gene.

    Science.gov (United States)

    Meyer, Birte; Kuever, Jan

    2007-12-01

    The dissimilatory adenosine-5'-phosphosulfate reductase is a key enzyme of the microbial sulfate reduction and sulfur oxidation processes. Because the alpha- and beta-subunit-encoding genes, aprBA, are highly conserved among sulfate-reducing and sulfur-oxidizing prokaryotes, they are most suitable for molecular profiling of the microbial community structure of the sulfur cycle in environment. In this study, a new aprA gene-targeting assay using a combination of PCR and denaturing gradient gel electrophoresis is presented. The screening of sulfate-reducing and sulfur-oxidizing reference strains as well as the analyses of environmental DNA from diverse habitats (e.g., microbial mats, invertebrate tissue, marine and estuarine sediments, and filtered hydrothermal water) by the new primer pair revealed an improved microbial diversity coverage and less-pronounced template-to-PCR product bias in direct comparison to those of the previously published primer set (B. Deplancke, K. R. Hristova, H. A. Oakley, V. J. McCracken, R. Aminov, R. I. Mackie, and H. R. Gaskins, Appl. Environ. Microbiol. 66:2166-2174, 2000). The concomitant molecular detection of sulfate-reducing and sulfur-oxidizing prokaryotes was confirmed. The new assay was applied in comparison with the 16S rRNA gene-based analysis to investigate the microbial diversity of the sulfur cycle in sediment, seawater, and manganese crust samples from four study sites in the area of the Lesser Antilles volcanic arc, Caribbean Sea (Caribflux project). The aprA gene-based approach revealed putative sulfur-oxidizing Alphaproteobacteria of chemolithoheterotrophic lifestyle to have been abundant in the nonhydrothermal sediment and water column. In contrast, the sulfur-based microbial community that inhabited the surface of the volcanic manganese crust was more complex, consisting predominantly of putative chemolithoautotrophic sulfur oxidizers of the Betaproteobacteria and Gammaproteobacteria.

  7. Signoles Aude, Le Hamas au pouvoir et après ?, Toulouse, Editions Milan, 2006.

    Directory of Open Access Journals (Sweden)

    Jean-François Legrain

    2007-11-01

    Full Text Available Dans les étroites limites imposées par la collection (absence totale de notes et de bibliographie, 112 p. en format réduit, le petit livre d’Aude Signoles, Le Hamas au pouvoir et après ?, commence à combler un vide de l’édition française. Le seul livre jusque là disponible en français et entièrement consacré à Hamas remonte à 7 années maintenant ; doté de nombreuses erreurs factuelles et faisant comme si Hamas était apparu avec l’autonomie des années 1990, il ignorait tout de son passé d’Ass...

  8. Variability of nursing care by APR-DRG and by severity of illness in a sample of nine Belgian hospitals.

    Science.gov (United States)

    Pirson, Magali; Delo, Caroline; Di Pierdomenico, Lionel; Laport, Nancy; Biloque, Veronique; Leclercq, Pol

    2013-10-10

    As soon as Diagnosis related Groups (DRG) were introduced in many hospital financing systems, most nursing research revealed that DRG were not very homogeneous with regard to nursing care. However, few studies are based on All Patient refined Diagnosis related Groups (APR-DRGs) and few of them use recent data. Objectives of this study are: (1) to evaluate if nursing activity is homogeneous by APR-DRG and by severity of illness (SOI) (2) to evaluate the outlier's rate associated with the nursing activity and (3) to compare nursing cost homogeneity per DRG and SOI. Study done in 9 Belgian hospitals on a selection of APR-DRG with more than 30 patients (7 638 inpatient stays). The evaluation of the homogeneity is based on coefficients of variation (CV). The 75th percentile + 1.5 × inter-quartile range was used to select high outliers. 25th percentile -1.5 × inter-quartile range was used to select low outliers. Nursing costs per ward were distributed on inpatient stays of each ward following two techniques (the LOS vs. the number of nursing care minutes per stay). The homogeneity of LOS by DRG and by SOI is relatively good (CV: 0.56). The homogeneity of the nursing activity by DRG is less good (CVs between 0.36 and 1.54) and is influenced by nursing activity outliers (high outliers' rate: 5.19%, low outliers' rate: 0.14%). The outlier's rate varies according to the studied variable. The high outliers' rate is higher for nursing activity than for LOS. The homogeneity of nursing costs is higher when costs are based on the LOS of patients than when based on minutes of nursing care (CVs between 0.26 and 1.46 for nursing costs based on LOS and between 0.49 and 2.04 for nursing costs based on minutes of nursing care). It is essential that the calculation of nursing cost by stay and by DRG for hospital financing purposes was based on nursing activity data, that more reflect resources used in wards, and not on LOS data. The only way to obtain this information is

  9. Food irradiation

    International Nuclear Information System (INIS)

    Lindqvist, H.

    1996-01-01

    This paper is a review of food irradiation and lists plants for food irradiation in the world. Possible applications for irradiation are discussed, and changes induced in food from radiation, nutritional as well as organoleptic, are reviewed. Possible toxicological risks with irradiated food and risks from alternative methods for treatment are also brought up. Ways to analyze weather food has been irradiated or not are presented. 8 refs

  10. L'Islam noir à Bahia d'après les travaux de l'école ethnologique brèsilienne

    Directory of Open Access Journals (Sweden)

    Roger Bastide

    1951-03-01

    Full Text Available RICARD (Robert. - L'Islam noir à Bahia d'après les travaux de l'école ethnologique brèsilienne (Primeiro Artigo do Parágrafo Depois da publicação, em frances, do livro de Nina Rodrigues sobre O animismo fetichista dos negros da Bahia e da duas memórias do Piére Etienne, parece que a França pouco tem ouvido falar dos problemas afro-brasileiras.

  11. Radio-induced neuropathology: from early effects to late sequelae. Rat behavioural and metabolic studies after sublethal total body irradiation; Neuropathologie radio-induite: des effets precoces aux sequelles tardives. Etudes comportementales et metaboliques chez le rat apres irradiation globale subletale

    Energy Technology Data Exchange (ETDEWEB)

    Martigne, A.P.

    2010-05-15

    The radioresistance dogma of Central Nervous System (CNS) is now obsolete. Recent progress in neuroscience allow us to reconsider the radiation-induced cognitive dysfunctions observed after radiation therapy or after a nuclear accident, and to devise appropriate diagnostic and therapeutic means. We have developed a Rat model to study the effects of total body irradiation at a sublethal dose (4.5 Gy). This leads to impaired learning and memory of a task being acquired during the first month - which is prevented by administration of a radioprotector (amifostine) - while it does not appear to affect retrograde memory. Early, an apoptotic wave occurs in the sub-ventricular zone, 5 to 9 hours after exposure, while neuro-genesis is suppressed. Two days after irradiation, the metabolic study conducted by NMR HRMAS (High Resolution Magic Angle Spinning) suggests the presence of cerebral oedema and the study of brain lipids in liquid NMR confirms the membrane damages (elevated cholesterol and phospholipids). The lipid profile is then normalized while a gliosis appears. Finally, 1 month post-irradiation, the elevation of GABA, an inhibitory neurotransmitter, in 2 separate brain structures, occurs simultaneously with a taurine decrease in the hippocampus that lasts 6 months. Our integrated model allows validating bio-markers measurable in vivo NMR spectroscopy - the next experimental stage - and testing new radiation-protective agents. (author)

  12. Irradiation proctitis

    International Nuclear Information System (INIS)

    Minami, Akira

    1977-01-01

    Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures. (Kanao, N.)

  13. Irradiation proctitis

    Energy Technology Data Exchange (ETDEWEB)

    Minami, A [Osaka Kita Tsishin Hospital (Japan)

    1977-06-01

    Literatures on late rectal injuries are discussed, referring to two patients with uterine cervical cancer in whom irradiation proctitis occurred after telecobalt irradiation following uterine extirpation. To one patients, a total of 5000 rads was irradiated, dividing into 250 rads at one time, and after 3 months, irradiation with a total of 2000 rads, dividing into 200 rads at one time, was further given. In another one patient, two parallel opposing portal irradiation with a total of 6000 rads was given. About a year after the irradiation, rectal injuries and cystitis, accompanying with hemorrhage, were found in both of the patients. Rectal amputation and proctotoreusis were performed. Cystitis was treated by cystic irradiation in the urological department. Pathohistological studies of the rectal specimen revealed atrophic mucosa, and dilatation of the blood vessels and edema in the colonic submucosa. Incidence of this disease, term when the disease occurs, irradiation dose, type of the disease, treatment and prevention are described on the basis of the literatures.

  14. Food irradiation

    International Nuclear Information System (INIS)

    Soothill, R.

    1987-01-01

    The issue of food irradiation has become important in Australia and overseas. This article discusses the results of the Australian Consumers' Association's (ACA) Inquiry into food irradiation, commissioned by the Federal Government. Issues discussed include: what is food irradiation; why irradiate food; how much food is consumer rights; and national regulations

  15. Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Jae; Han, Seung; Yun, Jae Hee; Baek, Seung Min [Department of Instrumentation and Control System Engineering, KEPCO Engineering and Construction, Daejeon (Korea, Republic of); Lee, Sang Jeong [Department of Electronics Engineering, Chungnam National University, Daejeon (Korea, Republic of)

    2015-07-01

    Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determination methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus

  16. Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

    International Nuclear Information System (INIS)

    Lee, Chang Jae; Han, Seung; Yun, Jae Hee; Baek, Seung Min; Lee, Sang Jeong

    2015-01-01

    Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determination methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus

  17. Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation

    International Nuclear Information System (INIS)

    Yabuuchi, Kiyohiro; Kuribayashi, Yutaka; Nogami, Shuhei; Kasada, Ryuta; Hasegawa, Akira

    2014-01-01

    Ion irradiation experiments are useful for investigating irradiation damage. However, estimating the irradiation hardening of ion-irradiated materials is challenging because of the shallow damage induced region. Therefore, the purpose of this study is to prove usefulness of nanoindentation technique for estimation of irradiation hardening for ion-irradiated materials. SUS316L austenitic stainless steel was used and it was irradiated by 1 MeV H + ions to a nominal displacement damage of 0.1, 0.3, 1, and 8 dpa at 573 K. The irradiation hardness of the irradiated specimens were measured and analyzed by Nix–Gao model. The indentation size effect was observed in both unirradiated and irradiated specimens. The hardness of the irradiated specimens changed significantly at certain indentation depths. The depth at which the hardness varied indicated that the region deformed by the indenter had reached the boundary between the irradiated and unirradiated regions. The hardness of the irradiated region was proportional to the inverse of the indentation depth in the Nix–Gao plot. The bulk hardness of the irradiated region, H 0 , estimated by the Nix–Gao plot and Vickers hardness were found to be related to each other, and the relationship could be described by the equation, HV = 0.76H 0 . Thus, the nanoindentation technique demonstrated in this study is valuable for measuring irradiation hardening in ion-irradiated materials

  18. Post irradiation test report of irradiated DUPIC simulated fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Jung, I. H.; Moon, J. S. and others

    2001-12-01

    The post-irradiation examination of irradiated DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) simulated fuel in HANARO was performed at IMEF (Irradiated Material Examination Facility) in KAERI during 6 months from October 1999 to March 2000. The objectives of this post-irradiation test are i) the integrity of the capsule to be used for DUPIC fuel, ii) ensuring the irradiation requirements of DUPIC fuel at HANARO, iii) performance verification in-core behavior at HANARO of DUPIC simulated fuel, iv) establishing and improvement the data base for DUPIC fuel performance verification codes, and v) establishing the irradiation procedure in HANARO for DUPIC fuel. The post-irradiation examination performed are γ-scanning, profilometry, density, hardness, observation the microstructure and fission product distribution by optical microscope and electron probe microanalyser (EPMA)

  19. Facts about food irradiation: Irradiated foods and the consumer

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet discusses market testing of irradiate food, consumer response to irradiated products has always been positive, and in some countries commercial quantities of some irradiated food items have been sold on a regular basis. Consumers have shown no reluctance to buy irradiated food products. 4 refs

  20. Presence de Carbone-13 dans les elements combustibles de type (U,Pu)O 2 irradies en reacteur rapide

    Science.gov (United States)

    Kryger, Bernard; Hagemann, Robert

    1982-06-01

    Du carbone-13 produit par la réaction de capture neutronique 168O + 10n → 136C + 42He se forme dans les combustibles de type oxyde irradiés en neutrons rapides. Cette réaction, dont le seuil d'énergie se situe à 2.35 MeV, conduit à la formation d'une quantité de carbone-13 qui peut varier notablement suivant le spectre neutronique du réacteur (entre 20 et 40 × 10 -6g 13C/g (U,Pu)O 2 pour une fluence de 2 × 10 23 n/cm 2). DES mesures effectuées sur le combustible et la gaine par spectrométrie de masse après irradiation montrent qu'une fraction égale ou supérieure à la moitié du carbone-13 produit dans l'oxyde peut être transférée dans la gaine. Un tel comportement nous fait considérer le carbone-13 comme un véritable marqueur du carbone plus généralement contenu dans l'oxyde et, à ce titre, la détection de cet isotope devrait contribuer à élucider tout particulièrement les mécanismes de carburation de la gaine par les combustibles (U,Pu)O 2 des réacteurs surgénérateurs.

  1. Intervention intégrée quant au risque de diabète après le diabète ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les femmes ayant souffert de diabète sucré de la grossesse, un diabète temporaire qui apparaît pendant la grossesse, présentent un risque élevé de développer le diabète de type 2 après leur grossesse. Cette étude de recherche abordera le problème en Afrique du Sud par l'intermédiaire d'une intervention novatrice au ...

  2. Food irradiation

    International Nuclear Information System (INIS)

    Matsuyama, Akira

    1990-01-01

    This paper reviews researches, commentaries, and conference and public records of food irradiation, published mainly during the period 1987-1989, focusing on the current conditions of food irradiation that may pose not only scientific or technologic problems but also political issues or consumerism. Approximately 50 kinds of food, although not enough to fill economic benefit, are now permitted for food irradiation in the world. Consumerism is pointed out as the major factor that precludes the feasibility of food irradiation in the world. In the United States, irradiation is feasible only for spices. Food irradiation has already been feasible in France, Hollands, Belgium, and the Soviet Union; has under consideration in the Great Britain, and has been rejected in the West Germany. Although the feasibility of food irradiation is projected to increase gradually in the future, commercial success or failure depends on the final selection of consumers. In this respect, the role of education and public information are stressed. Meat radicidation and recent progress in the method for detecting irradiated food are referred to. (N.K.) 128 refs

  3. Gamma Irradiation does not Cause Carcinogenesis of Irradiated Herbs

    International Nuclear Information System (INIS)

    Thongphasuk, Jarunee; Thongphasuk, Piyanuch; Eamsiri, Jarurut; Pongpat, Suchada

    2009-07-01

    Full text: Microbial contamination of medicinal herbs can be effectively reduced by gamma irradiation. Since irradiation may cause carcinogenicity of the irradiated herbs, the objective of this research is to study the effect of gamma irradiation (10 and 25 kGy) from cobalt-60 on carcinogenicity. The herbs studied were Pueraria candollei Grah., Curcuma longa Linn. Zingiber montanum, Senna alexandrina P. Miller, Eurycoma Longifolia Jack, Gymnostema pentaphylum Makino, Ginkgo biloba, Houttuynia cordata T., Andrographis paniculata, Thunbergia laurifolia L., Garcinia atroviridis G., and Cinnamomum verum J.S.Presl. The results showed that gamma irradiation at the dose of 10 and 25 kGy did not cause carcinogenicity of the irradiated herbs

  4. Food irradiation

    International Nuclear Information System (INIS)

    Duchacek, V.

    1989-01-01

    The ranges of doses used for food irradiation and their effect on the processed foods are outlined. The wholesomeness of irradiated foods is discussed. The present food irradiation technology development in the world is described. A review of the irradiated foods permitted for public consumption, the purposes of food irradiaton, the doses used and a review of the commercial-scale food irradiators are tabulated. The history and the present state of food processing in Czechoslovakia are described. (author). 1 fig., 3 tabs., 13 refs

  5. Influence of melanocytes in the ex-vivo reconstructed epidermal melanin unit following an acute UV irradiation; Role des melanocytes dans l'unite epidermique de melanisation reconstruite ex-vivo apres une irradiation UV aigue

    Energy Technology Data Exchange (ETDEWEB)

    Cario-Andre, M

    2000-11-15

    Influence of melanocytes in skin pigmentation is well documented, however its photo-protective role has given rise to controversy. The role of melanocytes have been investigated on reconstructed epidermis with 100 % of keratinocytes or 95 % of keratinocytes and 5 % of melanocytes. In a first time, the effect of an acute UVB dose has been studied on both reconstructed epidermis, next we have investigated UVA and UVA+B effects on these epidermis. Following irradiation, the presence of melanocytes in reconstructed epidermis protects against apoptosis without protecting significantly against DNA damage formation (CPD, 6-4PP) and protects against UV-induced unbalance of the SOD/catalase ratio (antioxidants enzymes). On the contrary, the presence of melanocytes in reconstructed epidermis amplifies lipids and proteins oxidations but seems to protect against DNA oxidations. Melanocytes differ from keratinocytes by their melanin content and their more important concentration in polyunsaturated fatty acids. To evaluate what is the part of melanin and the part of polyunsaturated fatty acids in epidermal UV responses, reconstructed epidermis with keratinocytes have been supplemented with polyunsaturated fatty acid. This study indicates that polyunsaturated fatty acids are responsible for lipids and proteins oxidations and that melanin protect against DNA oxidation induced by lipid peroxidation. All these studies demonstrate that, model of reconstructed epidermis and epidermis in-vivo have the same behaviour following UV irradiation. In the last part, sunscreens and antioxidants have been tested on reconstructed epidermis and have demonstrated that model of reconstructed epidermis is suitable for photo-protective molecules screening. (author)

  6. Molecular Analysis of the Diversity of Sulfate-Reducing and Sulfur-Oxidizing Prokaryotes in the Environment, Using aprA as Functional Marker Gene▿ †

    Science.gov (United States)

    Meyer, Birte; Kuever, Jan

    2007-01-01

    The dissimilatory adenosine-5′-phosposulfate reductase is a key enzyme of the microbial sulfate reduction and sulfur oxidation processes. Because the alpha- and beta-subunit-encoding genes, aprBA, are highly conserved among sulfate-reducing and sulfur-oxidizing prokaryotes, they are most suitable for molecular profiling of the microbial community structure of the sulfur cycle in environment. In this study, a new aprA gene-targeting assay using a combination of PCR and denaturing gradient gel electrophoresis is presented. The screening of sulfate-reducing and sulfur-oxidizing reference strains as well as the analyses of environmental DNA from diverse habitats (e.g., microbial mats, invertebrate tissue, marine and estuarine sediments, and filtered hydrothermal water) by the new primer pair revealed an improved microbial diversity coverage and less-pronounced template-to-PCR product bias in direct comparison to those of the previously published primer set (B. Deplancke, K. R. Hristova, H. A. Oakley, V. J. McCracken, R. Aminov, R. I. Mackie, and H. R. Gaskins, Appl. Environ. Microbiol. 66:2166-2174, 2000). The concomitant molecular detection of sulfate-reducing and sulfur-oxidizing prokaryotes was confirmed. The new assay was applied in comparison with the 16S rRNA gene-based analysis to investigate the microbial diversity of the sulfur cycle in sediment, seawater, and manganese crust samples from four study sites in the area of the Lesser Antilles volcanic arc, Caribbean Sea (Caribflux project). The aprA gene-based approach revealed putative sulfur-oxidizing Alphaproteobacteria of chemolithoheterotrophic lifestyle to have been abundant in the nonhydrothermal sediment and water column. In contrast, the sulfur-based microbial community that inhabited the surface of the volcanic manganese crust was more complex, consisting predominantly of putative chemolithoautotrophic sulfur oxidizers of the Betaproteobacteria and Gammaproteobacteria. PMID:17921272

  7. Aircraft Impact Assessment of APR1400 Reactor Containment Building

    International Nuclear Information System (INIS)

    Moon, Il Hwan; Kim, Do Yeon; Kim, Jae Hee; Kim, Sang Yun

    2011-01-01

    The implementation of a protection to withstand aircraft impact on safety-related structures and systems is basically based on a probabilistic evaluation for each site, if the licensing body doesn't require a deterministic approach. Existing nuclear power plants in Korea were designed based on the probabilistic approach, and the aircraft impact hazard remained less than a probability of 10 -7 . However, a man-made aircraft impact have been considered as a possible external accident for the nuclear power plant. New plant designs that are to be constructed in the U.S. after July 2009 must consider the effect of impact from a large commercial aircraft according to the requirements of 10 CFR 50.150. Especially, Reactor Containment Building (RCB) housing the safety-related equipment and fuels should be protected safely against aircraft crash without perforation and scabbing failure of external wall. APR1400 RCB is constructed as a prestressed concrete containment vessel (PCCV) which is surrounded by the auxiliary building housing additional safety-related equipment and other systems. In this study, the aircraft impact analyses for the RCB are carried out using Riera forcing function and aircraft model. Considered external wall thickness is 4 ft 6 in. for the cylindrical wall and 4 ft for the dome. Actual strengths of concrete and steel are considered as the material properties. For these analyses, the dynamic increment factor and concrete aging effect are considered in accordance with NEI 07-13(2011)

  8. Irradiated foods

    International Nuclear Information System (INIS)

    Darrington, Hugh

    1988-06-01

    This special edition of 'Food Manufacture' presents papers on the following aspects of the use of irradiation in the food industry:- 1) an outline view of current technology and its potential. 2) Safety and wholesomeness of irradiated and non-irradiated foods. 3) A review of the known effects of irradiation on packaging. 4) The problems of regulating the use of irradiation and consumer protection against abuse. 5) The detection problem - current procedures. 6) Description of the Gammaster BV plant in Holland. 7) World outline review. 8) Current and future commercial activities in Europe. (U.K.)

  9. Burnup determination of power reactor fuel elements by gamma spectrometry; Determination par spectrometrie {gamma} du taux d'irradiation des elements combustibles des reacteurs de puissance

    Energy Technology Data Exchange (ETDEWEB)

    Robin, M; Jastrzeb, M; Boisliveau, S; Boyer, R; Vidal, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    This report describes a method for determining by {gamma} spectrometry the burn up and the specific power of fuel elements irradiated in power reactors. The energy spectrum of {gamma} rays emitted by fission products is measured by means of a simple equipment using a sodium iodide detector and a multichannel analyzer. In order to extract from the spectrum a quantity proportional to the burn up, it is necessary to: - isolate an activity specific of one emitter,- give the same importance to fissions in uranium and plutonium - take into account the radioactive decay during and after irradiation. One hundred fuel elements were studied and burn up values obtained by {gamma} spectrometry are compared to results given by chemical analyses. Preliminary measurements show that the accuracy of the results is greatly increased by the use of a germanium detector, due to its good resolution. (authors) [French] Ce rapport expose une methode de determination par spectrometrie {gamma} du taux d'irradiation et de la puissance specifique des elements combustibles irradies dans les reacteurs de puissance. Une installation simple utilisant un detecteur d'iodure de sodium et un selecteur multicanaux mesure le spectre en energie du rayonnement {gamma} emis par les produits de fission. Afin d'extraire du spectre une quantite proportionnelle au taux de combustion, il faut: - isoler une activite specifique a un emetteur, - donner la meme importance aux fissions survenues dans l'uranium et le plutonium, - prendre en compte la decroissance radioactive pendant et apres l'irradiation. Les mesures ont porte sur une centaine d'elements combustibles et les taux de combustion obtenus par spectrometrie {gamma} sont compares aux resultats des analyses chimiques. Des mesures preliminaires montrent que l'utilisation d'un detecteur de germanium augmente considerablement la precision des resultats, en raison de son excellente resolution. (auteurs)

  10. O après-coup e a reconsolidação da memória

    Directory of Open Access Journals (Sweden)

    Graziele Luiza Barizon Scopel Gerbasi

    2015-04-01

    Full Text Available Em diferentes áreas do conhecimento é reconhecido que a memória está sujeita a transformações ao longo do tempo. Partindo desse pressuposto, o objetivo do presente estudo é apresentar uma discussão compreendendo a ideia de que nossas recordações são suscetíveis a transformações e a concepção de après-coup. Há o delineamento de algumas ideias acerca da temporalidade em Psicanálise e do mecanismo de reconsolidação da memória segundo as Neurociências. Utilizando-se tais conceitos, evidenciou-se a viabilidade de se pensar uma interlocução entre a Psicanálise e as Neurociências.

  11. Storage tests with irradiated and non-irradiated onions

    International Nuclear Information System (INIS)

    Gruenewald, T.; Rumpf, G.; Troemel, I.; Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe

    1978-07-01

    The results of several test series on the storage of irradiated and non-irradiated German grown onion are reported. Investigated was the influence of the irradiation conditions such as time and dose and of the storage conditions on sprouting, spoilage, browning of the vegetation centres, composition of the onions, strength and sensorial properties of seven different onion varieties. If the onions were irradiated during the dormancy period following harvest, a dose of 50 Gy (krad) was sufficient to prevent sprouting. Regarding the irradiated onions, it was not possible by variation of the storage conditions within the limits set by practical requirements to extend the dormancy period or to prevent browning of the vegetation centres, however. (orig.) 891 MG 892 RSW [de

  12. Food irradiation

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The article explains what radiation does to food to preserve it. Food irradiation is of economic importance to Canada because Atomic Energy of Canada Limited is the leading world supplier of industrial irradiators. Progress is being made towards changing regulations which have restricted the irradiation of food in the United States and Canada. Examples are given of applications in other countries. Opposition to food irradiation by antinuclear groups is addressed

  13. Mechanical and irradiation properties of zirconium alloys irradiated in HANARO

    International Nuclear Information System (INIS)

    Kwon, Oh Hyun; Eom, Kyong Bo; Kim, Jae Ik; Suh, Jung Min; Jeon, Kyeong Lak

    2011-01-01

    These experimental studies are carried out to build a database for analyzing fuel performance in nuclear power plants. In particular, this study focuses on the mechanical and irradiation properties of three kinds of zirconium alloy (Alloy A, Alloy B and Alloy C) irradiated in the HANARO (High-flux Advanced Neutron Application Reactor), one of the leading multipurpose research reactors in the world. Yield strength and ultimate tensile strength were measured to determine the mechanical properties before and after irradiation, while irradiation growth was measured for the irradiation properties. The samples for irradiation testing are classified by texture. For the irradiation condition, all samples were wrapped into the capsule (07M-13N) and irradiated in the HANARO for about 100 days (E > 1.0 MeV, 1.1 10 21 n/cm 2 ). These tests and results indicate that the mechanical properties of zirconium alloys are similar whether unirradiated or irradiated. Alloy B has shown the highest yield strength and tensile strength properties compared to other alloys in irradiated condition. Even though each of the zirconium alloys has a different alloying content, this content does not seem to affect the mechanical properties under an unirradiated condition and low fluence. And all the alloys have shown the tendency to increase in yield strength and ultimate tensile strength. Transverse specimens of each of the zirconium alloys have a slightly lower irradiation growth tendency than longitudinal specimens. However, for clear analysis of texture effects, further testing under higher irradiation conditions is needed

  14. Characterization of Irradiated and Non-Irradiated Rubber from Automotive Scrap Tires

    Science.gov (United States)

    Souza, Clécia Moura; Silva, Leonardo G.

    The aim of this work was to characterize the samples of irradiated and non-irradiated rubber from automotive scrap tires. Rubber samples from scrap tires were irradiated at irradiation doses of 200, 400 and 600kGy in an electron beam accelerator. Subsequently, both the irradiated and non-irradiated samples were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), tensile strength mechanical test, and Fourier transform infrared (FTIR) spectrophotometry.

  15. Consumer opinions in Argentina on food irradiation: irradiated onions

    International Nuclear Information System (INIS)

    Curzio, O.A.; Croci, C.A.

    1998-01-01

    Two surveys were carried out in Buenos Aires of consumer attitudes towards irradiated onions [no data given]. The first investigated the general level of consumer knowledge concerning food irradiation, whilst the second (which covered consumers who had actually bought irradiated onions) examined reasons for purchase and consumer satisfaction. Results reveal that more than 90% of consumers surveyed had a very limited knowledge of food irradiation

  16. Study of the effect of neutron and electron irradiations on the low temperature thermal conductivity of germanium and silicon; Etude de l'effet des irradiations neutronique et electronique sur la conductibilite thermique aux basses temperatures du germanium et du silicium

    Energy Technology Data Exchange (ETDEWEB)

    Vandevyver, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    The main results obtained from this work are the following: 1 Neutron irradiation (at 300 deg. K) produces lattice defects in germanium and silicon, and a corresponding very large lowering of the thermal conductivity is observed in the low temperature region (4-300 ). The results obtained have been explained with the help of the following hypotheses: for silicon a scattering of phonons by the stress fields produced by the defects; for germanium, a supplementary scattering of the electron phonon type. 2 Annealing treatments carried out on these materials above 373 deg. K restored the thermal conductivity over the whole temperature range of the measurements (4-300 deg. K); in the case of both germanium and silicon there were two steps in the annealing process. 3 A study of the thermal conductivity of germanium (initially P or N) after an electronic irradiation showed that the scattering of phonons could depend on the state of charge of the defects thus produced. (author) [French] Les principaux resultats obtenus au cours de ce travail sont les suivants : 1 Les irradiations neutroniques (a 300 deg. K) introduisent des defauts de reseau dans le germanium et le silicium et l'on observe correlativement pour ces materiaux, une tres importante diminution de conductibilite thermique dans le domaine des basses temperatures (4-300 deg. K). Les resultats obtenus ont pu etre interpretes en admettant principalement: pour le silicium, une diffusion des phonons par les champs de contrainte dus aux defauts; pour le germanium, une diffusion additionnelle du type electron-phonon. 2 Des recuits effectues sur ces materiaux au-dessus de 373 deg. K ont montre une restauration de la conductibilite thermique dans tout l'intervalle de temperature de mesure (4-300 deg. K) et comportant pour le germanium et le silicium, deux etapes de recuit 3 L'etude de la conductibilite thermique de germanium (initialement N ou P) apres une irradiation electronique, a montre que la diffusion des phonons

  17. Lymph node retrieval in abdominoperineal surgical specimen is radiation time-dependent

    Directory of Open Access Journals (Sweden)

    Allal Abdelkarim S

    2006-06-01

    Full Text Available Abstract Background A low yield of lymph nodes (LN in abdominoperineal resection (APR specimen has been associated with preoperative radiation therapy (XRT in population-based studies, which may preclude adequate staging of anorectal carcinomas. We hypothesized that the number of LN retrieved in APR specimen was correlated with the dose and the timing of pelvic irradiation. Patients and methods We performed a retrospective study of 102 patients who underwent APR in a single institution between 1980 and 2004. Pathological reports were reviewed and the number of lymph nodes retrieved in APR specimens was correlated with: 1 Preoperative radiation; 2 Dose of pelvic irradiation; and 3 Time interval between the end of XRT and surgery. Results There were 61 men and 41 women, with a median age of 66 (range 25–89 years. There were 12 patients operated for squamous cell carcinoma of the anal canal (SCCA and 90 for rectal cancer. 83% and 46% of patients with anal and rectal cancer respectively underwent radical/neoadjuvant radiotherapy. The mean ± SD number of LN in APR specimen was 9.2 ± 5.9. The mean number of LN in APR specimen was significantly lower in patients who underwent preoperative XRT (8 ± 5.5 vs. 10.5 ± 6.1, Mann-Whitney U test, p = 0.02. The mean number of LN was not significantly different after XRT in patients with SCCA than in patients with rectal cancer (6.2 ± 5.3 vs. 7.8 ± 5.3, p = 0.33. Finally, there was an inverse correlation between the yield of LN and the time elapsed between XRT and surgery (linear regression coefficient r = -0.32, p = 0.03. Conclusion Our data indicate that: 1 radiation therapy affects the yield of LN retrieval in APR specimen; 2 this impact is time-dependent. These findings have important implications with regard to anatomic-pathological staging of anal and rectal cancers and subsequent decision-making regarding adjuvant chemotherapy.

  18. After-Ripening of Red Pepper (Capsicum Annuum) as Affected by Ionizing Radiation; Effets des Rayonnements Ionisants sur le Murissement du Piment (Capsicum Annuum) Apres la Recolte; Vliyanie ioniziruyushchego izlucheniya na dozrevanie krasnogo pertsa (Capsicum Annuum); Efecto de las Radiaciones Ionizantes en la Postmaturacion del Pimiento Rojo (Capsicum Annuum)

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, J.; Kiss, I.; Andrassy, Eva [Central Food Research Institute, Budapest (Hungary)

    1966-11-15

    'effet direct des rayons X a des doses comprises entre 0 et 800 krad sur le piment doux fraichement cueilli et a des doses comprises entre 0 et 100 krad sur le murissement du piment apres la recolte. Sous l'effet de l'exposition a une dose comprise entre 400 et 800 krad, les pericarpes se-sont amollis; toutefois, la teneur en carotenoides n'a pas ete sensiblement reduite, meme apres exposition a une dose de 800 krad. Au cours de la periode de neuf semaines consecutives a l'irradiation, pendant laquelle les piments ont ete emmagasines a la temperature ambiante, on a constate que la teneur totale en pigments, sous forme de capsanthine avait augmente d'environ 90% dans les echantillons non traites. La formation des pigments a base de carotenoides a ete acceleree dans une certaine mesure par l'exposition a une dose de 80 rad et sensiblement acceleree par l'exposition a une dose de 2 krad. Les echantillons soumis a une dose de 2 krad avaient au bout de trois semaines la meme teneur en pigments que les echantillons temoins au bout de huit semaines. Toutefois, la teneur en pigments des echantillons irradies a diminue apres une periode d'emmagasinage de quatre a cinq semaines. L'exposition a des doses superieures a 10 krad a ralenti ou inhibe la formation des carotenoides pendant la periode d'emmagasinage (apres maturation). La reduction de la teneur en sucres et la vitesse de dessiccation n'ont pas ete affectees par l'exposition a des doses de 0 a 100 krad. Etant donne les effets nefastes de l'exposition aux doses de rayonnements de plusieurs centaines de krad necessaires pour detruire les moisissures qui provoquent l'alteration du piment a forte teneur en eau, ou pour inhiber fortement le developpement de ces organismes, il ne semble pas souhaitable d'utiliser les rayonnements pour reduire les pertes de piments fraichement cueillis. Neanmoins, l'application des doses tres faibles qui stimulent la formation des carotenoides semble devoir donner de bons resultats, car elle abrege la

  19. Facts about food irradiation: Chemical changes in irradiated foods

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet addresses the safety of irradiated food. The irradiation process produces very little chemical change in food, and laboratory experiments have shown no harmful effects in animals fed with irradiated milk powder. 3 refs

  20. Failure Mode and Effect Analysis of the Application Software of the Safety-critical I and C System in APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Koheun; Kim, Yong geul; Choi, Woong seok; Sohn, Se do [KEPCO Engineering and Construction, Daejeon (Korea, Republic of)

    2016-10-15

    In APR1400, the computer software hazard analysis is performed by hazard and operability analysis (HAZOP) method. Meanwhile, HAZOP has its limitation and cannot be considered better than fault tree analysis (FTA) or failure mode and effect (FMEA) analysis. HAZOP assumes that the system has been carefully studied, and all possible hazards, their effects or consequences and remedies are incorporated in the system. But incorporating every possible event in the design is impossible. In this light, this paper attempts to use FMEA method for evaluating the risk for safety-critical instrumentation and control (I and C) system software for NPP which is more practically than HAZOP. It is possible because the software failures are due to systematic faults that causing simultaneous failure in multiple division when the triggering event happens. This analysis is applied to safety-critical system of Shin-Hanul units 1 and 2 NPP, i.e., APR1400. Through SFMEA, the critical software failure modes and tasks that could result in CCF are identified and also evaluated to determine the associated risk level (e.g. high or intermediate or low) based on the failure effect. Biggest benefit from this analysis comparing with HAZOP is it can reveal the possible weak points and provide the guidance to the V and V team by helping to generate the test cases.

  1. Radiation Effect on Secondary Cancerization by Tumour Cell Grafts. Take of Irradiated Tumour Cells in Irradiated and Non-Irradiated Animals

    Energy Technology Data Exchange (ETDEWEB)

    Costachel, O.; Sandru, Gh.; Kitzulescu, I. [Oncological Institute, Bucharest (Romania)

    1969-11-15

    This study was designed to determine the ability of haemocytoblastoma, SME and Jensen tumours, which had been irradiated in vitro, to take in C{sub 57}BL/6 mice or Wistar rats that were whole-body irradiated at 0.4 kR and 0.6 kR respectively. It was found-that the take of tumour cell grafts irradiated in vitro increased in whole-body irradiated mice and rats but not in non-irradiated ones. When Wistar rats, that had been whole-body irradiated with 0.7 and 0.8 kR 1 - 7 months earlier and survived after treatment, were grafted with Jensen tumour cells irradiated in vitro with 3 kR they were found to develop tumours and lung metastases (in contrast to non-irradiated rats). A cross resistance against non-irradiated Jensen tumour cells was obtained in non- irradiated Wistar rats by grafting irradiated Jensen tumour cells. Chromosomal analysis showed two supplementary giant markers in the Jensen tumour cells that had been irradiated in vitro before grafting. (author)

  2. Food irradiation

    International Nuclear Information System (INIS)

    Beyers, M.

    1977-01-01

    The objectives of food irradiation are outlined. The interaction of irradiation with matter is then discussed with special reference to the major constituents of foods. The application of chemical analysis in the evaluation of the wholesomeness of irradiated foods is summarized [af

  3. Influence of melanocytes in the ex-vivo reconstructed epidermal melanin unit following an acute UV irradiation; Role des melanocytes dans l'unite epidermique de melanisation reconstruite ex-vivo apres une irradiation UV aigue

    Energy Technology Data Exchange (ETDEWEB)

    Cario-Andre, M

    2000-11-15

    Influence of melanocytes in skin pigmentation is well documented, however its photo-protective role has given rise to controversy. The role of melanocytes have been investigated on reconstructed epidermis with 100 % of keratinocytes or 95 % of keratinocytes and 5 % of melanocytes. In a first time, the effect of an acute UVB dose has been studied on both reconstructed epidermis, next we have investigated UVA and UVA+B effects on these epidermis. Following irradiation, the presence of melanocytes in reconstructed epidermis protects against apoptosis without protecting significantly against DNA damage formation (CPD, 6-4PP) and protects against UV-induced unbalance of the SOD/catalase ratio (antioxidants enzymes). On the contrary, the presence of melanocytes in reconstructed epidermis amplifies lipids and proteins oxidations but seems to protect against DNA oxidations. Melanocytes differ from keratinocytes by their melanin content and their more important concentration in polyunsaturated fatty acids. To evaluate what is the part of melanin and the part of polyunsaturated fatty acids in epidermal UV responses, reconstructed epidermis with keratinocytes have been supplemented with polyunsaturated fatty acid. This study indicates that polyunsaturated fatty acids are responsible for lipids and proteins oxidations and that melanin protect against DNA oxidation induced by lipid peroxidation. All these studies demonstrate that, model of reconstructed epidermis and epidermis in-vivo have the same behaviour following UV irradiation. In the last part, sunscreens and antioxidants have been tested on reconstructed epidermis and have demonstrated that model of reconstructed epidermis is suitable for photo-protective molecules screening. (author)

  4. Food irradiation

    International Nuclear Information System (INIS)

    Macklin, M.

    1987-01-01

    The Queensland Government has given its support the establishment of a food irradiation plant in Queensland. The decision to press ahead with a food irradiation plant is astonishing given that there are two independent inquiries being carried out into food irradiation - a Parliamentary Committee inquiry and an inquiry by the Australian Consumers Association, both of which have still to table their Reports. It is fair to assume from the Queensland Government's response to date, therefore, that the Government will proceed with its food irradiation proposals regardless of the outcomes of the various federal inquiries. The reasons for the Australian Democrats' opposition to food irradiation which are also those of concerned citizens are outlined

  5. Rapid differentiation between gamma-irradiated and non irradiated potato tubers

    International Nuclear Information System (INIS)

    Jona, R.; Fronda, A.

    1990-01-01

    The use of gamma irradiation as commercial method for the preservation of fruits and vegetables calls for methods of differentiation between irradiated and non-irradiated foodstuffs. In a previous research, the polysaccharidic content of cell walls of irradiated tissue has been investigated, but it required rather long time to reach the result. A method devised to ascertain the vitality of cells has been applied to distinguish irradiated from non-irradiated potato tubers. 500 mg of tissue excised from tubers have been infiltrated with tetrazolium chloride 0.6% in phosphate buffer, pH 7.4. After 15 hrs of incubation at 30 0 C the treated tissues have been extracted with 95% ethanol whose O.D. has been measured at 530 mμ wavelength. The colour intensity of the alcohol allowed a very clearcut recognition of the irradiated tubers. (author)

  6. Gamma irradiator

    International Nuclear Information System (INIS)

    Simonet, G.

    1986-09-01

    Fiability of devices set around reactors depends on material resistance under irradiation noticeably joints, insulators, which belongs to composition of technical, safety or physical incasurement devices. The irradiated fuel elements, during their desactivation in a pool, are an interesting gamma irradiation device to simulate damages created in a nuclear environment. The existing facility at Osiris allows to generate an homogeneous rate dose in an important volume. The control of the element distances to irradiation box allows to control this dose rate [fr

  7. The role of the Northern Sea Route in the development of floating nuclear power sources and prospects of cooperation with the EU countries, BRICS and APR

    International Nuclear Information System (INIS)

    Shadrin, A.P.; Ignat'ev, V.S.; Ivanov, V.A.

    2015-01-01

    The report discusses the construction of a transportable nuclear reactor, which will become the basis for the development of floating nuclear power sources on the Northern Sea Route. In this regard, the prospects of cooperation with the countries of the European Union, BRICS and APR [ru

  8. Measurement techniques of local parameters in the downcomer boiling experiment of APR1400

    International Nuclear Information System (INIS)

    Lee, Eu Hwak

    2004-02-01

    In order to investigate boiling phenomena experimentally in the downcomer during LBLOCA with Direct Vessel Injection (DVI), which is a new Safety Injection System (SIS) of Advanced Power Reactor 1400 MW (APR1400), several parameters should be measured through the verification of their applicability. In this study, measurement techniques of the parameters are developed for the downcomer boiling experiment; local phase velocities, local void fraction and heat flux from the heated wall. The experiment has been performed with the heated wall, which has a thickness of 8.2 cm and a height of 32.5 cm and made of the same material as the prototype (APR1400) with chrome coating against rusting. The newly developed pitot tube is applied to the measurement of local liquid velocity and its calibration curve is obtained experimentally with the consideration of the effect according to water temperature and hole size changes. The developed pitot tube measures the local liquid velocity with 0.69 % deviation and it is confirmed that the water temperature and geometrical change does not affect the calibration curve. The high-speed camera and commercial software are used to measure the local vapor velocity with the accuracy of 0.06 m/sec per pixel and the procedure is confirmed in the present study. It turns out that the vapor velocity is insensitive to void size. High-speed camera and image processing are used to measure the local void fraction with the determined intensity criterion for distinguishing each phase and the results are compared with the bulk void fraction by differential pressure transmitters. In the actual experiment, the developed method is applied successfully and the results show that the criterion of intensity has little effect on local void fraction. And, it is observed that the tendency between the measured local and bulk void faction is maintained with time. In order to measure heat flux from the heated wall, two heat flux measurement techniques are developed

  9. Analysis of steam condensation in APR1400 IRWST for loss of coolant accident

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Young Suk

    2006-02-15

    The In-Containment Refueling Water Storage Tank (IRWST) of APR1400 is installed at the bottom of containment building to promote the plant safety functions during an accident. This design feature brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised when an accident occurs. The hot steam which is released from RCS break enters the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, in which water is colder than incoming steam. The purpose of this study is to investigate the influence of IRWST and pressure relief damper on back pressure and temperature in APR1400 containment codes such as CONTEMPT-LT and GOTHIC. The comparison of codes showed that GOTHIC code be more appropriate for the prediction of containment pressure and temperature under the condition of steam condensation occurring in confined water pool. Especially, the GOTHIC has superior capability to treat multi-compartmentalized geometry This study developed one-compartment (single) model, two-compartment (separated) model, and three-dimension (3-D) model, respectively. Two compartment model separates the IRWST from the other containment compartments. In 3-D model, only the IRWST is nodalized with Cartesian modeling. The single model is developed for comparison with two-compartment model which can analyze PRD's influence. The separated model for predicting PRD's influence divides the space between containment and IRWST. 3-D model for IRWST was generated because it is not symmetric considering location of sparger, pump, and suction sump. Therefore, IRWST is simulated with not only detailed three-dimensional behavior but also independent flow paths for four PRDs. Many experimental studies for the direct-contact heat transfer in stratified steam water flows, cocurrent or countercurrent, have been performed (Segev et al., 1981; Lim et al., 1981

  10. Analysis of steam condensation in APR1400 IRWST for loss of coolant accident

    International Nuclear Information System (INIS)

    Oh, Young Suk

    2006-02-01

    The In-Containment Refueling Water Storage Tank (IRWST) of APR1400 is installed at the bottom of containment building to promote the plant safety functions during an accident. This design feature brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised when an accident occurs. The hot steam which is released from RCS break enters the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, in which water is colder than incoming steam. The purpose of this study is to investigate the influence of IRWST and pressure relief damper on back pressure and temperature in APR1400 containment codes such as CONTEMPT-LT and GOTHIC. The comparison of codes showed that GOTHIC code be more appropriate for the prediction of containment pressure and temperature under the condition of steam condensation occurring in confined water pool. Especially, the GOTHIC has superior capability to treat multi-compartmentalized geometry This study developed one-compartment (single) model, two-compartment (separated) model, and three-dimension (3-D) model, respectively. Two compartment model separates the IRWST from the other containment compartments. In 3-D model, only the IRWST is nodalized with Cartesian modeling. The single model is developed for comparison with two-compartment model which can analyze PRD's influence. The separated model for predicting PRD's influence divides the space between containment and IRWST. 3-D model for IRWST was generated because it is not symmetric considering location of sparger, pump, and suction sump. Therefore, IRWST is simulated with not only detailed three-dimensional behavior but also independent flow paths for four PRDs. Many experimental studies for the direct-contact heat transfer in stratified steam water flows, cocurrent or countercurrent, have been performed (Segev et al., 1981; Lim et al., 1981; Kim and

  11. Foodstuff irradiation

    International Nuclear Information System (INIS)

    1982-01-01

    Report written on behalf of the Danish Food Institute summarizes national and international rules and developments within food irradiation technology, chemical changes in irradiated foodstuffs, microbiological and health-related aspects of irradiation and finally technological prospects of this conservation form. Food irradiatin has not been hitherto applied in Denmark. Radiation sources and secondary radiation doses in processed food are characterized. Chemical changes due to irradiation are compared to those due to p.ex. food heating. Toxicological and microbiological tests and their results give no unequivocal answer to the problem whether a foodstuff has been irradiated. The most likely application fields in Denmark are for low radiation dosis inhibition of germination, riping delay and insecticide. Medium dosis (1-10 kGy) can reduce bacteria number while high dosis (10-50 kGy) will enable total elimination of microorganisms and viruses. Food irradiation can be acceptable as technological possibility with reservation, that further studies follow. (EG)

  12. Estimation of irradiation temperature within the irradiation program Rheinsberg

    CERN Document Server

    Stephan, I; Prokert, F; Scholz, A

    2003-01-01

    The temperature monitoring within the irradiation programme Rheinsberg II was performed by diamond powder monitors. The method bases on the effect of temperature on the irradiation-induced increase of the diamond lattice constant. The method is described by a Russian code. In order to determine the irradiation temperature, the lattice constant is measured by means of a X-ray diffractometer after irradiation and subsequent isochronic annealing. The kink of the linearized temperature-lattice constant curves provides a value for the irradiation temperature. It has to be corrected according to the local neutron flux. The results of the lattice constant measurements show strong scatter. Furthermore there is a systematic error. The results of temperature monitoring by diamond powder are not satisfying. The most probable value lays within 255 C and 265 C and is near the value estimated from the thermal condition of the irradiation experiments.

  13. Austin: austenitic steel irradiation E 145-02 Irradiation Report

    International Nuclear Information System (INIS)

    Genet, F.; Konrad, J.

    1987-01-01

    Safety measures for nuclear reactors require that the energy which might be liberated in a reactor core during an accident should be contained within the reactor pressure vessel, even after very long irradiation periods. Hence the need to know the mechanical properties at high deformation velocity of structure materials that have received irradiation damage due to their utilization. The stainless steels used in the structures of reactors undergo damage by both thermal and fast neutrons, causing important changes in the mechanical properties of these materials. Various austenitic steels available as structural materials were irradiated or are under irradiation in various reactors in order to study the evolution of the mechanical properties at high deformation velocity as a function of the irradiation damage rate. The experiment called AUSTIN (AUstenitic STeel IrradiatioN) 02 was performed by the JRC Petten Establishment on behalf of Ispra in support of the reactor safety programme

  14. Irradiation of goods

    International Nuclear Information System (INIS)

    Huebner, G.

    1992-01-01

    The necessary dose and the dosage limits to be observed depend on the kind of product and the purpose of irradiation. Product density and density distribution, product dimensions, but also packaging, transport and storage conditions are specific parameters influencing the conditions of irradiation. The kind of irradiation plant - electron accelerator or gamma plant - , its capacity, transport system and geometric arrangement of the radiation field are factors influencing the irradiation conditions as well. This is exemplified by the irradiation of 3 different products, onions, deep-frozen chicken and high-protein feed. Feasibilities and limits of the irradiation technology are demonstrated. (orig.) [de

  15. Comparison of deuterium retention for ion-irradiated and neutron-irradiated tungsten

    International Nuclear Information System (INIS)

    Oya, Yasuhisa; Kobayashi, Makoto; Okuno, Kenji; Shimada, Masashi; Calderoni, Pattrick; Oda, Takuji; Hara, Masanori; Hatano, Yuji; Watanabe, Hideo

    2014-01-01

    The behavior of D retentions for Fe 2+ irradiated tungsten with the damage of 0.025-3 dpa was compared with that for neutron irradiated tungsten with 0.025 dpa. The D 2 TDS spectra for Fe 2+ irradiated tungsten consisted of two desorption stages at 450 K and 550 K although that for neutron irradiated tungsten was composed of three stages and addition desorption stage was found around 750 K. The desorption rate of major desorption stage at 550 K increased as the number of dpa by Fe 2+ irradiation increased. In addition, the first desorption stage at 450 K was only found for the damaged samples, indicating that the second stage would be based on intrinsic defects or vacancy produced by Fe 2+ irradiation and the first stage should be the accumulation of D in mono vacancy leading to the lower activation energy, where the dislocation loop and vacancy was produced. The third one was only found for the neutron irradiation, showing the D trapping by void or vacancy cluster and the diffusion effect is also contributed due to high FWHM of TDS spectrum. It can be said that the D 2 TDS spectra for Fe 2+ -irradiated tungsten could not represent that for neutron-irradiated one, showing that the deuterium trapping and desorption mechanism for neutron-irradiated tungsten has a difference from that for ion-irradiated one. (author)

  16. Development of a Desktop Simulator for APR1400 Nuclear Power Plant

    International Nuclear Information System (INIS)

    Lee, J. B.

    2016-01-01

    It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant

  17. Development of a Desktop Simulator for APR1400 Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. B. [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant.

  18. Response of irradiated diet fed rats to whole body X irradiation

    International Nuclear Information System (INIS)

    Hasan, S.S.; Kushwaha, A.K.S.

    1985-01-01

    The response to whole body X irradiation has been studied in the brain of rats fed both on a normal diet (consisting of equal parts of wheat and gram flour) and on a low protein irradiated diet (consisting of a part of normal diet and three parts of wheat). The activity of enzymes related to the glucose metabolism (glucose 6-phosphate dehydrogenase and fructose diphosphate aldolase) is reduced, while that of peroxidant enzymes (catalase and lipid peroxidase) increased in the brain of rats that received a diet poor in proteins and irradiated diets (normal or hypoproteic). DNA and RNA levels and protein content show a significant reduction in the brain of rats with hypoproteic and irradiated diets. The total body irradiation causes serious alterations in the brain in animals with a hypoproteic malnutritions due both to a low protein and an irradiated diet. The brain of rats fed on a low protein and irradiated diet exhibits after whole body irradiation damages more severe than those in rats fed on a normal irradiated diet

  19. L'exstrophie vésicale chez l'adulte: A propos de 5 cas

    African Journals Online (AJOL)

    I. Ziouziou

    adultes ayant une exstrophie vésicale, mais au prix de complications stomiales à long terme. © 2013 Pan .... rapport avec la sous-estime de soi, la frustration et les difficultés ... tats satisfaisants en terme d'amélioration de l'image corporelle et.

  20. Identification of irradiated foods prospects for post-irradiation estimate of irradiation dose in irradiated dry egg products

    International Nuclear Information System (INIS)

    Katusin-Raxem, B.; Mihaljievic, B.; Razem, D.

    2002-01-01

    Radiation-induced chemical changes in foods are generally very small at the usual processing doses. Some exception is radiation degradation of lipids, which are the components most susceptible to oxidation. A possible use of lipid hydroperoxides (LOOH) as indicators of irradiation is described for whole egg and egg yolk powders. A sensitive and reproducible spectrophotometric method for LOOH measurement based on feric thiocyanate, as modified in our laboratory, was applied. This method enabled the determination of LOOH, including oleic acid hydroperoxides, which is usually not possible with some other frequently used methods. The lowest limit of 0.05 mmol LOOH/kg lipid could be measured. The measurements were performed in various batches of whole egg and egg yolk powders by the same producer, as well as in samples supplied by various producers. Baseline level in unirradiated egg powder 0.110 ± 0.067 mmol LOOH /kgL was established. The formation of LOOH with dose, as well as the influence of age, irradiation conditions, storage time and storage conditions on LOOH were investigated. The irradiation of whole egg and egg yolk powders in the presence of air revealed an initially slow increase of LOOH, caused by an inherent antioxidative capacity, followed by a fast linear increase after the inhibition dose (D o ). In all investigated samples D o of 2 kGy was determined. Hydroperoxides produced in irradiated materials decay with time. In whole egg and egg yolk powders, after an initially fast decay, the level of LOOH continued to decrease by the first-order decay. Nevertheless, after a six months storage it was still possible to unambiguously identify samples which had been irradiated with 2 kGy in the presence of air. Reirradiation of these samples revealed a significant reduction of D o to 1 kGy. In samples irradiated with 4 kGy and kept under the same conditions, the shortening of D o to 0.5 kGy was determined by reirradiation. This offers a possibility for the

  1. Validation of the All Patient Refined Diagnosis Related Group (APR-DRG) Risk of Mortality and Severity of Illness Modifiers as a Measure of Perioperative Risk.

    Science.gov (United States)

    McCormick, Patrick J; Lin, Hung-Mo; Deiner, Stacie G; Levin, Matthew A

    2018-03-22

    The All Patient Refined Diagnosis Related Group (APR-DRG) is an inpatient visit classification system that assigns a diagnostic related group, a Risk of Mortality (ROM) subclass and a Severity of Illness (SOI) subclass. While extensively used for cost adjustment, no study has compared the APR-DRG subclass modifiers to the popular Charlson Comorbidity Index as a measure of comorbidity severity in models for perioperative in-hospital mortality. In this study we attempt to validate the use of these subclasses to predict mortality in a cohort of surgical patients. We analyzed all adult (age over 18 years) inpatient non-cardiac surgery at our institution between December 2005 and July 2013. After exclusions, we split the cohort into training and validation sets. We created prediction models of inpatient mortality using the Charlson Comorbidity Index, ROM only, SOI only, and ROM with SOI. Models were compared by receiver-operator characteristic (ROC) curve, area under the ROC curve (AUC), and Brier score. After exclusions, we analyzed 63,681 patient-visits. Overall in-hospital mortality was 1.3%. The median number of ICD-9-CM diagnosis codes was 6 (Q1-Q3 4-10). The median Charlson Comorbidity Index was 0 (Q1-Q3 0-2). When the model was applied to the validation set, the c-statistic for Charlson was 0.865, c-statistic for ROM was 0.975, and for ROM and SOI combined the c-statistic was 0.977. The scaled Brier score for Charlson was 0.044, Brier for ROM only was 0.230, and Brier for ROM and SOI was 0.257. The APR-DRG ROM or SOI subclasses are better predictors than the Charlson Comorbidity Index of in-hospital mortality among surgical patients.

  2. Post-irradiation examination and R and D programs using irradiated fuels at KAERI

    International Nuclear Information System (INIS)

    Chun, Yong Bum; Min, Duck Kee; Kim, Eun Ka and others

    2000-12-01

    This report describes the Post-Irradiation Examination(PIE) and R and D programs using irradiated fuels at KAERI. The objectives of post-irradiation examination (PIE) for the PWR irradiated fuels, CANDU fuels, HANARO fuels and test fuel materials are to verify the irradiation performance and their integrity as well as to construct a fuel performance data base. The comprehensive utilization program of the KAERI's post-irradiation examination related nuclear facilities such as Post-Irradiation Examination Facility (PIEF), Irradiated Materials Examination Facility (IMEF) and HANARO is described

  3. Post-irradiation examination and R and D programs using irradiated fuels at KAERI

    International Nuclear Information System (INIS)

    Chun, Yong Bum; So, Dong Sup; Lee, Byung Doo; Lee, Song Ho; Min, Duck Kee

    2001-09-01

    This report describes the Post-Irradiation Examination(PIE) and R and D programs using irradiated fuels at KAERI. The objectives of post-irradiation examination (PIE) for the PWR irradiated fuels, CANDU fuels, HANARO fuels and test fuel materials are to verify the irradiation performance and their integrity as well as to construct a fuel performance data base. The comprehensive utilization program of the KAERI's post-irradiation examination related nuclear facilities such as Post-Irradiation Examination Facility (PIEF), Irradiated Materials Examination Facility (IMEF) and HANARO is described

  4. Fatou, Julia, Montel le grand prix des sciences mathématiques de 1918, et après

    CERN Document Server

    Audin, Michèle

    2009-01-01

    Comment Fatou et Julia ont inventA(c) ce que la (TM)on appelle aujourda (TM)hui les ensembles de Julia, avant, pendant et aprA]s la premiA]re guerre mondiale? La (TM)histoire est racontA(c)e, avec ses mathA(c)matiques, ses conflits, ses personnalitA(c)s. Elle est traitA(c)e A partir de sources nouvelles, et avec rigueur. On pourra sa (TM)y initier A la (TM)itA(c)ration des fractions rationnelles et A la dynamique complexe (ensembles de Julia, de Mandelbrot, ensembles-limites). Qui A(c)taient Pierre Fatou, Gaston Julia, Paul Montel? On y trouvera en particulier des informations sur un mathA(c)m

  5. Improved Design of PECS to reduce Flow Instability for EU-APR1400

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Keunsung

    2014-01-01

    For EU-APR1400, PECS (Passive Ex-vessel corium retaining and Cooling System), so-called core catcher, was adopted to keep the integrity of basemat in containment by preventing MCCI (Molten Core Concrete Interaction) through retaining core debris and cooling corium outside the reactor vessel. In this paper, the improved design of PECS is presented to increase coolability by reducing flow instability in the region of cooling channel. In this paper, flow instability analysis was carried out using CFD code to find out the most improved design of PECS, which is to increase coolability by reducing bubble entrainment in the region of cooling channel. The reduction of bubble entrainment in the downcomer facilitates higher mass flow rates in the downcomer. Among presented four designed for the downcomer of PECS, the superstep design shows the highest mass flow rate and the lowest gas holdup in the downcomer as well as in the cooling channel. Compared with the existing design, the elimination of the horizontal part and the addition of an extra space above the vertical entrance to the downcomer seem to help the separation of the vapor

  6. Irradiation creep under 60 MeV alpha irradiation

    International Nuclear Information System (INIS)

    Reiley, T.C.; Shannon, R.H.; Auble, R.L.

    1980-01-01

    Accelerator-produced charged-particle beams have advantages over neutron irradiation for studying radiation effects in materials, the primary advantage being the ability to control precisely the experimental conditions and improve the accuracy in measuring effects of the irradiation. An apparatus has recently been built at ORNL to exploit this advantage in studying irradiation creep. These experiments employ a beam of 60 MeV alpha particles from the Oak Ridge Isochronous Cyclotron (ORIC). The experimental approach and capabilities of the apparatus are described. The damage cross section, including events associated with inelastic scattering and nuclear reactions, is estimated. The amount of helium that is introduced during the experiments through inelastic processes and through backscattering is reported. Based on the damage rate, the damage processes and the helium-to-dpa ratio, the degree to which fast reactor and fusion reactor conditions may be simulated is discussed. Recent experimental results on the irradiation creep of type 316 stainless steel are presented, and are compared to light ion results obtained elsewhere. These results include the stress and temperature dependence of the formation rate under irradiation. The results are discussed in relation to various irradiation creep mechanisms and to damage microstructure as it evolves during these experiments. (orig.)

  7. Food irradiation: An update

    International Nuclear Information System (INIS)

    Morrison, Rosanna M.

    1984-01-01

    Recent regulatory and commercial activity regarding food irradiation is highlighted. The effects of irradiation, used to kill insects and microorganisms which cause food spoilage, are discussed. Special attention is given to the current regulatory status of food irradiation in the USA; proposed FDA regulation regarding the use of irradiation; pending irradiation legislation in the US Congress; and industrial applications of irradiation

  8. Contribution to the study of internal friction in graphites; Contribution a l'etude du frottement interieur des graphites

    Energy Technology Data Exchange (ETDEWEB)

    Merlin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-03-01

    A study has been made of the internal friction in different graphites between -180 C and +500 C using a torsion pendulum; the graphites had been previously treated thermo-mechanically, by neutron irradiation and subjected to partial annealings. It has been shown that there occurs: a hysteretic type dissipation of energy, connected with interactions between dislocations and other defects in the matrix; a dissipation having a partially hysteretic character which can be interpreted by a Granato-Luke type formalism and which is connected with the presence of an 'ultra-micro porosity'; a dissipation by a relaxation mechanism after a small dose of irradiation; this is attributed to the reorientation of bi-interstitials; a dissipation having the characteristics of a solid state transformation, this during an annealing after irradiation. It is attributed to the reorganization of interstitial defects. Some information has thus been obtained concerning graphites, in particular: their behaviour at low mechanical stresses, the nature of irradiation defects and their behaviour during annealing, the structural changes occurring during graphitization, the relationship between internal friction and macroscopic mechanical properties. (author) [French] L'etude du coefficient de frottement interieur au moyen d'un pendule de torsion entre -180 C et +500 C a ete realisee pour differents graphites apres des traitements thermo-mecaniques, des irradiations neutroniques et des guerisons partielles. Il a ete mis en evidence: une dissipation d'energie a caractere hysteretique, reliee aux interactions des dislocations avec les autres defauts de la matrice; une dissipation a caractere partiellement hysteretique, interpretable par un formalisme type Granato-Lucke et reliee a la presence d'une ''ultra-microporosite''; une dissipation par un mecanisme de relaxation, apres irradiation a faible dose, attribuee a la reorientation de di-interstitiels; une dissipation presentant les caracteristiques d

  9. U-turn type continuous irradiation method and device for radiation-irradiated capsule

    International Nuclear Information System (INIS)

    Kikuchi, Takayuki.

    1997-01-01

    A capsule to be irradiated is moved while being rotated in one of conveying shafts disposed in a reactor to conduct irradiation treatment. Then, the irradiated capsule is made U-turn in the reactor, inserted to the other conveying shaft and moved while being rotated to conduct irradiation treatment again, and then transported out of the reactor. The device comprises a rotational conveying shaft for moving the irradiated capsule while rotating it, a conveying gear for U-turning the irradiated capsule in the reactor and inserting it to the conveying shaft and a driving mechanism for synchronously rotating the conveying gear relative to the conveying shaft at a constant ratio. Mechanical time loss and manual operation time loss can be reduced upon loading and taking up of the irradiated capsule. Then, the amount of irradiation treatment per unit time is increased, and an optional neutron irradiation amount can be obtained thereby enabling to reduce operator's radiation exposure. (N.H.)

  10. Fuel assembly design for APR1400 with low CBC

    Energy Technology Data Exchange (ETDEWEB)

    Hah, Chang Joo, E-mail: changhah@kings.ac.kr [Department of NPP Engineering, KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-04-29

    APR 1400 is a PWR (Pressurized Water Reactor) with rated power of 3983 MWth and 241 assemblies. Recently, demand for extremely longer cycle up to 24 months is increasing with challenge of higher critical boron concentration (CBC). In this paper, assembly design method of selecting Gd-rods is introduced to reduce CBC. The purpose of the method is to lower the critical boron concentration of the preliminary core loading pattern (PLP), and consequently to achieve more negative or less positive moderator temperature coefficient (MTC). In this method, both the ratio of the number of low-Gd rod to the number of high-Gd rod (r) and assembly average Gd wt% (w) are the decision variables. The target function is the amount of soluble boron concentration reduction, which can be converted to Δk{sub TARGET}. A set of new designed fuel assembly satisfies an objective function, min [f=∑{sub i}(Δk{sub FA}−Δk{sub i})], and enables a final loading pattern to reach a target CBC. The constraints required to determine a set of Δk are physically realizable pair, (r,w), and the sum of Δk of new designed assemblies as close to Δk{sub TARGET} as possible. New Gd-bearing assemblies selected based on valid pairs of (r,w) are replaced with existing assemblies in a PLP. This design methodology is applied to Shin-Kori Unit 3 Cycle 1 used as a reference model. CASMO-3/MASTER code is used for depletion calculation. CASMO-3/MASTER calculations with new designed assemblies produce lower CBC than the expected CBC, proving that the proposed method works successful.

  11. Modelling property changes in graphite irradiated at changing irradiation temperature

    CSIR Research Space (South Africa)

    Kok, S

    2011-01-01

    Full Text Available A new method is proposed to predict the irradiation induced property changes in nuclear; graphite, including the effect of a change in irradiation temperature. The currently used method; to account for changes in irradiation temperature, the scaled...

  12. Irradiation of foodstuffs

    International Nuclear Information System (INIS)

    Sjoeberg, A.M.

    1993-01-01

    Foodstuffs are irradiated to make them keep better. The ionizing radiation is not so strong as to cause radioactivity in the foodstuffs. At least so far, irradiation has not gained acceptance among consumers, although it has been shown to be a completely safe method of preservation. Irradiation causes only slight chemical changes in food. What irradiation does, however, is to damage living organisms, such as bacteria, DNA and proteins, thereby making the food keep longer. Irradiation can be detected from the food afterwards; thus it can be controlled effectively. (orig.)

  13. PRIMA-1Met/APR-246 induces apoptosis and tumor growth delay in small cell lung cancer expressing mutant p53

    DEFF Research Database (Denmark)

    Zandi, Roza; Selivanova, Galina; Christensen, Camilla Laulund

    2011-01-01

    Small cell lung cancer (SCLC) is a highly malignant disease with poor prognosis, necessitating the need to develop new and efficient treatment modalities. PRIMA-1(Met) (p53-dependent reactivation of massive apoptosis), also known as APR-246, is a small molecule, which restores tumor suppressor...... function to mutant p53 and induces cancer cell death in various cancer types. Since p53 is mutated in more than 90% of SCLC, we investigated the ability of PRIMA-1(Met) to induce apoptosis and inhibit tumor growth in SCLC with different p53 mutations....

  14. Analysis for the Effects of Grid Voltage Degradation on APR1400 Operation, Case Study for Egypt

    International Nuclear Information System (INIS)

    Hassan, Mostafa Ahmed Fouad; Koo, Chang Choong

    2015-01-01

    Egypt is one of the countries planning to introduce a NPP into its electrical power system. Although the Egyptian power system has sufficient capacity to integrate any commercially available nuclear unit as the total installed capacity of the power system is more than 32GWe, which is more than 10 times capacity of any nuclear unit in the range of 1000 to 1700MWe, the system is vulnerable to extreme voltage variations, especially voltage degradation during peak load conditions. These conditions can lead to voltage collapse if a counter measure, usually load shedding, is not taken in a proper time. Hence, it is necessary to analyze the effect of such conditions on the safe and economic operation of the NPP. In this paper we analyzed the effects of grid voltage degradation on the safe and economic operation of the Advanced Power Reactor (APR1400) to determine any adverse effects on the plant auxiliary loads while operating in the Egyptian power system. In this paper the effects of grid voltage degradation on the safe and economic operation of APR1400 were investigated taking into account, generator operating limits, plant safety requirements, operation modes and loading categories in order to determine any adverse effect on the plant auxiliary loads while operating in the Egyptian power system. The results of the load flow and motor starting analysis demonstrated that during normal operation the automatic voltage regulator and transformers OLTCs can mitigate the effect of grid voltage degradation without any detrimental effect on the plant auxiliary loads. During the highly unlikely LOCA condition if the grid voltage degraded below 95%, the degraded voltage relays at Class 1E 4.16 kV buses will trip the supply and load breakers and reconnect the required safety loads to the EDG after 4 minutes time delay. During this period the safety loads required for LOCA can be started and accelerated to their rated speed safely even in the worst case of expected degraded voltage

  15. Tissue irradiator

    International Nuclear Information System (INIS)

    Hungate, F.P.; Riemath, W.F.; Bunnell, L.R.

    1975-01-01

    A tissue irradiator is provided for the in-vivo irradiation of body tissue. The irradiator comprises a radiation source material contained and completely encapsulated within vitreous carbon. An embodiment for use as an in-vivo blood irradiator comprises a cylindrical body having an axial bore therethrough. A radioisotope is contained within a first portion of vitreous carbon cylindrically surrounding the axial bore, and a containment portion of vitreous carbon surrounds the radioisotope containing portion, the two portions of vitreous carbon being integrally formed as a single unit. Connecting means are provided at each end of the cylindrical body to permit connections to blood-carrying vessels and to provide for passage of blood through the bore. In a preferred embodiment, the radioisotope is thulium-170 which is present in the irradiator in the form of thulium oxide. A method of producing the preferred blood irradiator is also provided, whereby nonradioactive thulium-169 is dispersed within a polyfurfuryl alcohol resin which is carbonized and fired to form the integral vitreous carbon body and the device is activated by neutron bombardment of the thulium-169 to produce the beta-emitting thulium-170

  16. Food irradiation

    International Nuclear Information System (INIS)

    Migdal, W.

    1995-01-01

    A worldwide standard on food irradiation was adopted in 1983 by codex Alimentarius Commission of the Joint Food Standard Programme of the Food and Agriculture Organization (FAO) of the United Nations and The World Health Organization (WHO). As a result, 41 countries have approved the use of irradiation for treating one or more food items and the number is increasing. Generally, irradiation is used to: food loses, food spoilage, disinfestation, safety and hygiene. The number of countries which use irradiation for processing food for commercial purposes has been increasing steadily from 19 in 1987 to 33 today. In the frames of the national programme on the application of irradiation for food preservation and hygienization an experimental plant for electron beam processing has been established in Inst. of Nuclear Chemistry and Technology. The plant is equipped with a small research accelerator Pilot (19 MeV, 1 kW) and industrial unit Electronika (10 MeV, 10 kW). On the basis of the research there were performed at different scientific institutions in Poland, health authorities have issued permissions for irradiation for; spices, garlic, onions, mushrooms, potatoes, dry mushrooms and vegetables. (author)

  17. Food irradiation

    International Nuclear Information System (INIS)

    1991-01-01

    Processing of food with low levels of radiation has the potential to contribute to reducing both spoilage of food during storage - a particular problem in developing countries - and the high incidence of food-borne disease currently seen in all countries. Approval has been granted for the treatment of more than 30 products with radiation in over 30 countries but, in general, governments have been slow to authorize the use of this new technique. One reason for this slowness is a lack of understanding of what food irradiation entails. This book aims to increase understanding by providing information on the process of food irradiation in simple, non-technical language. It describes the effects that irradiation has on food, and the plant and equipment that are necessary to carry it out safely. The legislation and control mechanisms required to ensure the safety of food irradiation facilities are also discussed. Education is seen as the key to gaining the confidence of the consumers in the safety of irradiated food, and to promoting understanding of the benefits that irradiation can provide. (orig.) With 4 figs., 1 tab [de

  18. Irradiation damage

    International Nuclear Information System (INIS)

    Howe, L.M.

    2000-01-01

    There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization

  19. Irradiation damage

    Energy Technology Data Exchange (ETDEWEB)

    Howe, L.M

    2000-07-01

    There is considerable interest in irradiation effects in intermetallic compounds from both the applied and fundamental aspects. Initially, this interest was associated mainly with nuclear reactor programs but it now extends to the fields of ion-beam modification of metals, behaviour of amorphous materials, ion-beam processing of electronic materials, and ion-beam simulations of various kinds. The field of irradiation damage in intermetallic compounds is rapidly expanding, and no attempt will be made in this chapter to cover all of the various aspects. Instead, attention will be focused on some specific areas and, hopefully, through these, some insight will be given into the physical processes involved, the present state of our knowledge, and the challenge of obtaining more comprehensive understanding in the future. The specific areas that will be covered are: point defects in intermetallic compounds; irradiation-enhanced ordering and irradiation-induced disordering of ordered alloys; irradiation-induced amorphization.

  20. Hemibody irradiation

    International Nuclear Information System (INIS)

    Schen, B.C.; Mella, O.; Dahl, O.

    1992-01-01

    In a large number of cancer patients, extensive skeletal metastases or myelomatosis induce vast suffering, such as intolerable pain and local complications of neoplastic bone destruction. Analgetic drugs frequently do not yield sufficient palliation. Irradiation of local fields often has to be repeated, because of tumour growth outside previously irradiated volumes. Wide field irradiation of the lower or upper half of the body causes significant relief of pain in most patients. Adequate pretreatment handling of patients, method of irradiation, and follow-up are of importance to reduce side effects, and are described as they are carried out at the Department of Oncology, Haukeland Hospital, Norway. 16 refs., 2 figs

  1. Bakery products from irradiated and non-irradiated eggs - analytical problems associated with the detection of irradiation in processed foods

    International Nuclear Information System (INIS)

    Grabowski, H.U. von; Pfordt, J.

    1993-01-01

    In spring and early summer 1992, a number of irradiated egg products were illegally imported into Germay. To prove the irradiation of these egg products, mainly combined gas chromatography-mass spectrometry was applied. With this present study we wanted to answer the question if we were also able to detect the use of irradiated eggs in processed foods. The processed food we chose to produce and to investigate was a tart layer. For this product, dilution effects are of minor importance as no extra fat was added. Thus, the layers' fat almost exclusively came from the eggs. To study the influence of emulsifiers, we produced batters both with and without adding an emulsifer. The unsaturted hydrocarbons C14:1, C16:3, C16:2, C17:2, and C17:1 served as markers for an irradiation. In the non-irradiated egg samples and in the tart layers produced from them, these compounds could not be detected (or in some cases only in small amounts). They were, however, detectable in all irradiated samples. DCB could be found in all irradiated egg samples and in the tart layers that were baked from irradiated eggs. It was not present in non-irradiated eggs and in tart layers produced from them. (orig./Vhe)

  2. A study by internal friction of defects produced in iron and nickel irradiated at very low temperatures; Etude au moyen du frottement interne des defauts crees par irradiation a tres basse temperature dans le fer et le nickel

    Energy Technology Data Exchange (ETDEWEB)

    Keating-Hart, G de [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    This work represents a contribution to the study of point defects in metals. After a brief review of the theory of internal friction we will discuss some technical innovations aimed at increasing the flexibility of the apparatus at our disposal. These innovations have allowed us to extend our range of measurements down to 20 deg. K. We will then discuss our experimental results. Firstly, we describe preliminary experiments on electron irradiated iron and the evidence for a laminar structure. Secondly, we present and account of the first measurements on nickel after neutron irradiation at 27 deg. K. We will compare the results with those obtained by other methods in this laboratory. Essentially we have observed transitory peaks at low temperature due to close Frenkel pairs and we have noticed the absence of a peak which would correspond to the magnetic after effect band of stage I{sub E}. An attempt is made to explain the disappearance of the observed peaks upon the application of an internal saturating magnetic field. (author) [French] Ce memoire constitue une contribution a l'etude des defauts ponctuels dans les metaux. Apres un bref apercu theorique sur le frottement interne, nous presenterons quelques realisations techniques destinees a accroitre les possibilites des instruments qui nous ont ete confies. Ces dernieres nous ont permis d'etendre la gamme des mesures jusqu'a 20 deg. K. Nous parlerons ensuite de nos resultats experimentaux. En premier lieu, ceux obtenus au cours de premieres experiences, sur le fer irradie aux electrons mettent en evidence des structures de laminage. En second lieu, nous exposerons les premieres mesures realisees sur du nickel irradie aux neutrons; nous comparerons ces resultats avec ceux obtenus par d'autres moyens experimentaux dans le laboratoire. Nous avons observe essentiellement des pics fugitifs a basse temperature dus aux paires proches de Frenckel et nous avons constate l'absence d'un pic correspondant a la bande de tramage

  3. Embrittlement of irradiated ferritic/martensitic steels in the absence of irradiation hardening

    Energy Technology Data Exchange (ETDEWEB)

    Klueh, R.L. [Oak Ridge Noational Laboratory, TN (United States); Shiba, K. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Sokolov, M. [Oak Ridge National Laboratory, Materials Science and Technology Div., TN (United States)

    2007-07-01

    Full text of publication follows: Neutron irradiation of 9-12% Cr ferritic/martensitic steels below 425-450 deg. C produces microstructural defects that cause an increase in yield stress and ultimate tensile strength. This irradiation hardening causes embrittlement, which is observed in Charpy impact and toughness tests as an increase in ductile-brittle transition temperature (DBTT). Based on observations that show little change in strength in these steels irradiated above 425-450 deg. C, the general conclusion has been that no embrittlement occurs above this irradiation-hardening temperature regime. In a recent study of F82H steel irradiated at 300, 380, and 500 deg. C, irradiation hardening-an increase in yield stress-was observed in tensile specimens irradiated at the two lower temperatures, but no change was observed for the specimens irradiated at 500 deg. C. As expected, an increase in DBTT occurred for the Charpy specimens irradiated at 300 and 380 deg. C. However, there was an unexpected increase in the DBTT of the specimens irradiated at 500 deg. C. The observed embrittlement was attributed to the irradiation-accelerated precipitation of Laves phase. This conclusion was based on results from a detailed thermal aging study of F82H, in which tensile and Charpy specimens were aged at 500, 550, 600, and 650 deg. C to 30,000 h. These studies indicated that there was a decrease in yield stress at the two highest temperatures and essentially no change at the two lowest temperatures. Despite the strength decrease or no change, the DBTT increased for Charpy specimens irradiated at all four temperatures. Precipitates were extracted from thermally aged specimens, and the amount of precipitate was correlated with the increase in transition temperature. Laves phase was identified in the extracted precipitates by X-ray diffraction. Earlier studies on conventional elevated-temperature steels also showed embrittlement effects above the irradiation-hardening temperature

  4. Neutron Flux Characterization of Irradiation Holes for Irradiation Test at HANARO

    Directory of Open Access Journals (Sweden)

    Yang Seong Woo

    2016-01-01

    Full Text Available The High flux Advanced Neutron Application ReactOr (HANARO is a unique research reactor in the Republic of Korea, and has been used for irradiation testing since 1998. To conduct irradiation tests for nuclear materials, the irradiation holes of CT and OR5 have been used due to a high fast-neutron flux. Because the neutron flux must be accurately calculated to evaluate the neutron fluence of irradiated material, it was conducted using MCNP. The neutron flux was measured using fluence monitor wires to verify the calculated result. Some evaluations have been conducted, however, more than 20% errors have frequently occurred at the OR irradiation hole, while a good agreement between the calculated and measured data was shown at the CT irradiation hole.

  5. Behavior of high Tc-superconductors and irradiated defects under reactor irradiation

    International Nuclear Information System (INIS)

    Atobe, Kozo; Honda, Makoto; Fukuoka, Noboru; Yoshida, Hiroyuki.

    1991-01-01

    It has been well known that the lattice defects of various types are introduced in ceramics without exception, and exert large effect to the function of these materials. Among oxides, the electronic materials positively using oxygen defect control have been already put in practical use. Also in the oxide high temperature superconductors which are Perovskite type composite oxides, the superconductive characteristics are affected largely by the concentration of the oxygen composing them. This is regarded as an important factor for causing superconductivity, related with the oxygen cavities arising at this time and the carriers bearing superconductivity. In this study, the irradiation effect with relatively low dose, the measurement under irradiation, the effect of irradiation temperature, and the effect of radiation quality were evaluated by the irradiation of YBCO, EBCO and LBCO. The experimental method, and the irradiation effect at low temperature and normal temperature, the effect of Co-60 gamma ray irradiation instead of reactor irradiation are reported. (K.I.)

  6. Electron beam irradiating device

    Energy Technology Data Exchange (ETDEWEB)

    Shinohara, K

    1969-12-20

    The efficiency of an electron beam irradiating device is heightened by improving the irradiation atmosphere and the method of cooling the irradiation window. An irradiation chamber one side of which incorporates the irradiation windows provided at the lower end of the scanner is surrounded by a suitable cooling system such as a coolant piping network so as to cool the interior of the chamber which is provided with circulating means at each corner to circulate and thus cool an inert gas charged therewithin. The inert gas, chosen from a group of such gases which will not deleteriously react with the irradiating equipment, forms a flowing stream across the irradiation window to effect its cooling and does not contaminate the vacuum exhaust system or oxidize the filament when penetrating the equipment through any holes which the foil at the irradiation window may incur during the irradiating procedure.

  7. Food irradiation

    International Nuclear Information System (INIS)

    Kobayashi, Yasuhiko; Kikuchi, Masahiro

    2009-01-01

    Food irradiation can have a number of beneficial effects, including prevention of sprouting; control of insects, parasites, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored for long periods. It is most unlikely that all these potential applications will prove commercially acceptable; the extend to which such acceptance is eventually achieved will be determined by practical and economic considerations. A review of the available scientific literature indicates that food irradiation is a thoroughly tested food technology. Safety studies have so far shown no deleterious effects. Irradiation will help to ensure a safer and more plentiful food supply by extending shelf-life and by inactivating pests and pathogens. As long as requirement for good manufacturing practice are implemented, food irradiation is safe and effective. Possible risks of food irradiation are not basically different from those resulting from misuse of other processing methods, such as canning, freezing and pasteurization. (author)

  8. Facts about food irradiation: Microbiological safety of irradiated food

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet considers the microbiological safety of irradiated food, with especial reference to Clostridium botulinum. Irradiated food, as food treated by any ''sub-sterilizing'' process, must be handled, packaged and stored following good manufacturing practices to prevent growth and toxin production of C. botulinum. Food irradiation does not lead to increased microbiological hazards, nor can it be used to save already spoiled foods. 4 refs

  9. Food irradiation

    International Nuclear Information System (INIS)

    Paganini, M.C.

    1991-06-01

    Food treatment by means of ionizing energy, or irradiation, is an innovative method for its preservation. In order to treat important volumes of food, it is necessary to have industrial irradiation installations. The effect of radiations on food is analyzed in the present special work and a calculus scheme for an Irradiation Plant is proposed, discussing different aspects related to its project and design: ionizing radiation sources, adequate civil work, security and auxiliary systems to the installations, dosimetric methods and financing evaluation methods of the project. Finally, the conceptual design and calculus of an irradiation industrial plant of tubercles is made, based on the actual needs of a specific agricultural zone of our country. (Author) [es

  10. Biology of food irradiation

    International Nuclear Information System (INIS)

    Murray, D.R.

    1990-01-01

    The author presents his arguments for food scientists and biologists that the hazards of food irradiation outweigh the benefits. The subject is discussed in the following sections: introduction (units, mutagenesis, seed viability), history of food irradiation, effects of irradiation on organoleptic qualities of staple foods, radiolytic products and selective destruction of nutrients, production of microbial toxins in stored irradiated foods and loss of quality in wheat, deleterious consequences of eating irradiated foods, misrepresentation of the facts about food irradiation. (author)

  11. DAMAGE IN MOLYBDENUM ASSOCIATED WITH NEUTRON IRRADIATION AND SUBSEQUENT POST-IRRADIATION ANNEALING

    Energy Technology Data Exchange (ETDEWEB)

    Mastel, B.

    1963-07-23

    Molybdemum containing carbon was studied in an attempt to establish the combined effect of impurity content and neutron irradiation on the properties and structure of specific metals. Molybdenum foils were punched into discs and heat treated in vacuum. They were then slow-cooled and irradiated. After irradiation and subsequent decay of radioactivity to a low level the foils were subjected to x-ray diffraction measurements. Cold-worked foils with less than 10 ppm carbon showed no change in microstructure due to irradiation. Molybdenum foils that were annealed prior to irradiation showed spot defects. In foils containing up to 500 ppm carbon, it was concluded that the small loops present after irradiation are due to the clustering of point defects at interstitial carbon atoms, followed by collapse to form a dislocation loop. The amount of lattice expansion after irradiation was strongly dependent on impurity content. Neutron irradiation was found to reduce the number of active slip systems. (M.C.G.)

  12. Perspective on food irradiation

    International Nuclear Information System (INIS)

    Newsome, R.L.

    1987-01-01

    A brief review summarizes current scientific information on the safety and efficacy of irradiation processing of foods. Attention is focused on: specifics of the irradiation process and its effectiveness in food preservation; the historical development of food irradiation technology in the US; the response of the Institute of Food Technologists to proposed FDA guidelines for food irradiation; the potential uses of irradiation in the US food industry; and the findings of the absence of toxins and of unaltered nutrient density (except possibly for fats) in irradiated foods. The misconceptions of consumers concerning perceived hazards associated with food irradiation, as related to consumer acceptance, also are addressed

  13. Fabrication of irradiation capsule for IASCC irradiation tests (2). Irradiation capsule for crack propagation test (Joint research)

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

    2008-03-01

    It is known that irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack propagation test is reported. (author)

  14. Fabrication of irradiation capsule for IASCC irradiation tests (1). Irradiation capsule for crack growth test (Joint research)

    International Nuclear Information System (INIS)

    Ide, Hiroshi; Matsui, Yoshinori; Kawamata, Kazuo; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Onuma, Yuichi; Watanabe, Hiroyuki; Inoue, Shuichi; Izumo, Hironobu; Ishida, Takuya; Saito, Takashi; Ishitsuka, Etsuo; Kawamura, Hiroshi; Kaji, Yoshiyuki; Ugachi, Hirokazu; Tsukada, Takashi

    2008-03-01

    It is known that Irradiation Assisted Stress Corrosion Cracking (IASCC) occurs when austenitic stainless steel components used for light water reactor (LWR) are irradiated for a long period. In order to evaluate the high aging of the nuclear power plant, the study of IASCC becomes the important problem. The specimens irradiated in the reactor were evaluated by post irradiation examination in the past study. For the appropriate evaluation of IASCC, it is necessary to test it under the simulated LWR conditions; temperature, water chemistry and irradiation conditions. In order to perform in-pile SCC test, saturated temperature capsule (SATCAP) was developed. There are crack growth test, crack propagation test and so on for in-pile SCC test. In this report, SATCAP for crack growth test is reported. (author)

  15. Irradiation of foodstuffs

    International Nuclear Information System (INIS)

    Bugyaki, L.

    1977-01-01

    The author studies the criteria for the harmlessness of irradiation as a food-preservation process. The glucose and proteins of bacto-tryptone, irradiated at 5 Mrads, do not increase the Escherichia Coli C 600 lysogenous bacteriophages, compared to the induction produced by direct irradiation of the strain or to the exposition to nitrogenous yperite. The possible mutagenic effect is therefore different. Wheat flour freshly irradiated at 5 Mrads shows physico-chemical changes. When given to mice as 50% of their ration, it leads to a higher incidence of tumours and a greater number of meiotic chromosome alteration (besides some discreet physio-pathological changes in fertility and longevity). Immunoelectrophoresis in agar or agarose gel does not allow any detection of irradiation of meat, fish or eggs. A vertical electrophoresis in starch gel can lead to a differentiation between frozen or chilled meat and the one that is irradiated at 0.5 or 5 Mrads, but the same thing can't be said for fish or eggs. Lastly an irradiated mushroom shows every sign of freshness but, when planted in a suitable medium, its cuttings do not present any cell proliferation which could give a rapid and simple method of detecting the irradiation. (G.C.)

  16. Blood irradiation

    International Nuclear Information System (INIS)

    Chandy, Mammen

    1998-01-01

    Viable lymphocytes are present in blood and cellular blood components used for transfusion. If the patient who receives a blood transfusion is immunocompetent these lymphocytes are destroyed immediately. However if the patient is immunodefficient or immunosuppressed the transfused lymphocytes survive, recognize the recipient as foreign and react producing a devastating and most often fatal syndrome of transfusion graft versus host disease [T-GVHD]. Even immunocompetent individuals can develop T-GVHD if the donor is a first degree relative since like the Trojan horse the transfused lymphocytes escape detection by the recipient's immune system, multiply and attack recipient tissues. T-GVHD can be prevented by irradiating the blood and different centers use doses ranging from 1.5 to 4.5 Gy. All transfusions where the donor is a first degree relative and transfusions to neonates, immunosuppressed patients and bone marrow transplant recipients need to be irradiated. Commercial irradiators specifically designed for irradiation of blood and cellular blood components are available: however they are expensive. India needs to have blood irradiation facilities available in all large tertiary institutions where immunosuppressed patients are treated. The Atomic Energy Commission of India needs to develop a blood irradiator which meets international standards for use in tertiary medical institutions in the country. (author)

  17. Study of the recrystallisation of irradiated uranium; Etude sur l'uranium irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bloch, J; Mustelier, J P; Bussy, P; Blin, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    1- Study of the recrystallisation of irradiated uranium. The recrystallisation of uranium irradiated to a burnup level of 220 MWj/t, at a temperature of the order of 350 deg. C, has been investigated. The observations were made chiefly by means of micrography an hardness measurements. If the irradiated metal is compared with a cold-drawn metal showing the same shearing of the twinned crystals, and therefore the same rate of plastic deformation, as the irradiated metal, it is noted that the restoring of the irradiated metal takes place at a considerably higher temperature than that of the cold-drawn metal. Pre-crystallisation is very much delayed. Only, a passage of the {alpha}-{beta} transformation point quickly wipes out irradiation effect. 2- Hardening of uranium by irradiation. Using hardness measurements we have studied more especially the effect of very weak irradiations on uranium (integrated flux < 10{sup 16} nvt). The hardness does not increase linearly with the flux, but a period of incubation is observed probably representing the time necessary for saturation of the dislocations. (author)Fren. [French] 1- Etude de la recristallisation de l'uranium irradie. On a etudie la recristallisation d'uranium irradie jusqu'a un taux de combustion de 220 MWj/t a une temperature de l'ordre de 350 deg. C. Les observations ont ete faites principalement a l'aide de la micrographie et de la durete. Si l'on compare le metal irradie avec un metal ecroui presentant le meme cisaillement des macles, donc le meme taux de deformation plastique que le metal irradie, on constate que la restauration du metal irradie se fait a une temperature notablement superieure a celle du metal ecroui. La recristallisation est tres retardee. Seul, un passage du point de transformation {alpha}-{beta} efface rapidement l'effet de l'irradiation. 2- Durcissement de l'uranium par irradiation. Nous avons, a l'aide de la durete, etudie plus particulierement l'effet de tres faibles irrtions sur l

  18. Property changes in graphite irradiated at changing irradiation temperature

    International Nuclear Information System (INIS)

    Price, R.J.; Haag, G.

    1979-07-01

    Design data for irradiated graphite are usually presented as families of isothermal curves showing the change in physical property as a function of fast neutron fluence. In this report, procedures for combining isothermal curves to predict behavior under changing irradiation temperatures are compared with experimental data on irradiation-induced changes in dimensions, Young's modulus, thermal conductivity, and thermal expansivity. The suggested procedure fits the data quite well and is physically realistic

  19. Process and apparatus for irradiating film, and irradiated film

    International Nuclear Information System (INIS)

    1981-01-01

    A process for irradiating film is described, which consists of passing the film through an electron irradiation zone having an electron reflection surface disposed behind and generally parallel to the film; and disposing within the irradiation zone adjacent the edges of the film a lateral reflection member for reflecting the electrons toward the reflection surface to further reflect the reflected electrons towards the adjacent edges of the film. (author)

  20. Irradiation enhanced diffusion and irradiation creep tests in stainless steel alloys

    International Nuclear Information System (INIS)

    Loelgen, R.H.; Cundy, M.R.; Schuele, W.

    1977-01-01

    A review is given of investigations on the rate of phase changes during neutron and electron irradiation in many different fcc alloys showing either precipitation or ordering. The diffusion rate was determined as a function of the irradiation flux, the irradiation temperature and the irradiation dose. It was found that the radiation enhanced diffusion in all the investigated alloys is nearly temperature independent and linearly dependent on the flux. From these results conclusions were drawn concerning the properties of point defects and diffusion mechanisms rate determining during irradiation, which appears to be of a common nature for fcc alloys having a similar structure to those investigated. It has been recognized that the same dependencies which are found for the diffusion rate were also observed for the irradiation creep rate in stainless steels, as reported in literature. On the basis of this observation a combination of measurements is suggested, of radiation enhanced diffusion and radiation enhanced creep in stainless steel alloys. The diffusion tests will be performed at the Euratom Joint Research Centre in Ispra, Italy, and the irradiation creep tests will be carried out in the High Flux Reactor /9/ of the Euratom Joint Research Centre in Petten, The Netherlands. In order to investigate irradiation creep on many samples at a time two special rigs were developed which are distinguished only by the mode of stress applied to the steel specimens. In the first type of rig about 50 samples can be tested uniaxially under tension with various combinations of irradiation temperature and stress. The second type of rig holds up to 70 samples which are tested in bending, again with various combinations of irradiation temperature and stress

  1. Technical review on irradiation tests and post-irradiation examinations in JMTR

    International Nuclear Information System (INIS)

    2017-07-01

    The Japan Materials Testing Reactor (JMTR) has been contributing to various R and D activities in the nuclear research such as the fundamental research of nuclear materials/ fuels, safety research and development of power reactors, radio isotope (RI) production since its beginning of the operation in 1968. Irradiation technologies and post irradiation examination (PIE) technologies are the important factors for irradiation test research. Moreover, these technologies induce the breakthrough in area of nuclear research. JMTR has been providing unique capabilities for the irradiation test research for about 40 years since 1968. In future, any needs for irradiation test research used irradiation test reactors will continue, such as R and D of generation 4 power reactors, fundamental research of materials/fuels, RI production. Now, decontamination and new research reactor construction are common issue in the world according to aging. This situation is the same in Japan. This report outlines irradiation and PIE technologies developed at JMTR in 40 years to contribute to the technology transfer and human resource development. We hope that this report will be used for the new research rector design as well as the irradiation test research and also used for the human resource development of nuclear engineers in future. (author)

  2. Effect of medium and post-irradiation storage on rooting of irradiated onions

    International Nuclear Information System (INIS)

    Singh, Rita

    2000-01-01

    Rooting test for detection of irradiation in onion bulbs was studied. Onions were exposed to different dose levels of 30, 60, 90, 120 and 150 Gy. The effects of irradiation dose, cultivar difference, rooting medium and post-irradiation storage on the rooting were investigated. The number and the length of the roots formed in onions were found to decrease on irradiation. The effect was more at higher doses. The effect of irradiation on rooting was also evident after 120 days of storage. (author)

  3. Irradiation and flavor

    International Nuclear Information System (INIS)

    Reineccius, G.A.

    1992-01-01

    Flavor will not be a significant factor in determining the success of irradiated foods entering the U.S. market. The initial applications will use low levels of irradiation that may well result in products with flavor superior to that of products from alternative processing techniques (thermal treatment or chemical fumigation). The success of shelf-stable foods produced via irradiation may be much more dependent upon our ability to deal with the flavor aspects of high levels of irradiation

  4. Dosimetry and irradiation methods for the ANSTO gamma technology research irradiator (GATRI)

    International Nuclear Information System (INIS)

    Izard, M.E.

    1988-07-01

    The Australian Nuclear Science and Technology Organisation's gamma technology research irradiator (GATRI) at Lucas Heights, New South Wales, has been modified for use as a research and small-scale commercial irradiation facility to be available to government agencies and private industry for the technical and economic evaluation of irradiation processing. The new source rack was designed around existing mechanical components to optimise the limited space available within the irradiation cell. Irradiation parameters investigated during commissioning included the effect of source-to-target distance on relative dose rates within targets of the same density; effect of density on dose-rate distribution within targets irradiated at the same distance from the source; and the contribution of transit dose to low absorbed doses as the source is raised and lowered. The efficiency of the irradiator was determined for various target densities and overdose ratios

  5. The influence of late-stage pupal irradiation and increased irradiated: un-irradiated male ratio on mating competitiveness of the malaria mosquito Anopheles arabiensis Patton.

    Science.gov (United States)

    Helinski, M E H; Knols, B G J

    2009-06-01

    Competitiveness of released males in genetic control programmes is of critical importance. In this paper, we explored two scenarios to compensate for the loss of mating competitiveness after pupal stage irradiation in males of the malaria mosquito Anopheles arabiensis. First, competition experiments with a higher ratio of irradiated versus un-irradiated males were performed. Second, pupae were irradiated just prior to emergence and male mating competitiveness was determined. Males were irradiated in the pupal stage with a partially or fully-sterilizing dose of 70 or 120 Gy, respectively. Pupae were irradiated aged 20-26 h (young) as routinely performed, or the pupal stage was artificially prolonged by cooling and pupae were irradiated aged 42-48 h (old). Irradiated males competed at a ratio of 3:1:1 to un-irradiated males for mates in a large cage design. At the 3:1 ratio, the number of females inseminated by males irradiated with 70 Gy as young pupae was similar to the number inseminated by un-irradiated males for the majority of the replicates. At 120 Gy, significantly fewer females were inseminated by irradiated than by un-irradiated males. The irradiation of older pupae did not result in a significantly improved male mating competitiveness compared to the irradiation of young pupae. Our findings indicate that the loss of competitiveness after pupal stage irradiation can be compensated for by a threefold increase of irradiated males, but only for the partially-sterilizing dose. In addition, cooling might be a useful tool to facilitate handling processes of large numbers of mosquitoes in genetic control programmes.

  6. A Study on the Coupled FEM-Analysis for Reactor Vessel Lower Head of APR1400 under the Severe Accident Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyonam; Namgung, Ihn [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-10-15

    For the stabilization of the RPV the in-vessel retention strategy with external reactor vessel cooling (IVR-ERVC) is adopted in APR1400. Under this severe accident condition, a good understanding of the mechanical behavior of the reactor vessel lower head (RVLH) is necessary both for verification of structural integrity and for improving the design applying appropriate accident mitigation strategies. The purpose of this study is to develop the analysis method of the RVLH with thermo-mechanical analysis using FEM tool (ANSYS v.15) in case of core-melting severe accident condition, and then analyze the RVLH of APR1400 including creep behavior. The plastic strain can be the major cause of lower head failure on the reactor vessel, and the creep cannot be not negligible factor of the failure under the severe accident condition. In the study, we applied constant convection coefficient at assumed temperature on the outside wall of RPV and substitute creep data of SA-508. In addition, it was found that the steel ablation at the interface between corium and vessel steel is not only a thermal phenomenon in the METCOR experiments. Corrosion processes and the formation of eutectics lead to the erosion of the vessel steel at temperatures that are significantly lower than the melting temperature of steel. It called thermo-chemical attack of the corium (corrosion). Reduced wall thickness because of the thermo-chemical effect by corium increase the equivalent plastic strain, and decrease the minimum time to reach 20% creep strain.

  7. Irradiation device

    International Nuclear Information System (INIS)

    Suzuki, Toshimitsu.

    1989-01-01

    In an irradiation device for irradiating radiation rays such as electron beams to pharmaceuticals, etc., since the distribution of scanned electron rays was not monitored, the electron beam intensity could be determined only indirectly and irradiation reliability was not satisfactory. In view of the above, a plurality of monitor wires emitting secondary electrons are disposed in the scanning direction near a beam take-out window of a scanning duct, signals from the monitor wires are inputted into a display device such as a cathode ray tube, as well as signals from the monitor wires at the central portion are inputted into counting rate meters to measure the radiation dose as well. Since secondary electrons are emitted when electron beams pass through the monitor wires and the intensity thereof is in proportion with the intensity of incident electron beams, the distribution of the radiation dose can be monitored by measuring the intensity of the emitted secondary electrons. Further, uneven irradiation, etc. can also be monitored to make the radiation of irradiation rays reliable. (N.H.)

  8. Sensory properties of irradiated foods

    International Nuclear Information System (INIS)

    Plestenjak, A.

    1997-01-01

    Food irradiation is a simple and effective preservation technique. The changes caused by irradiation depend on composition of food, on the absorbed dose, the water content and temperature during and after irradiation. In this paper the changes of food components caused by irradiation, doses for various food irradiation treatments, foods and countries where the irradiation is allowed, and sensory properties of irradiated food are reviewed

  9. Surveillance of PLUS7TM fuel for PWR nuclear power plant

    International Nuclear Information System (INIS)

    Jang, Y. K.; Kim, J. I.; Shin, J. C.; Chung, J. G.; Chung, S. K.; Kim, M. S.; Lee, T. H.; Yoon, Y. B.; Kim, T. W.

    2012-01-01

    The surveillance program on the advanced nuclear fuel of PLUS TM developed for Optimized Power Reactors of 1000 MWe (OPR1000s) and Advanced Power Reactors of 1400 MWe (APR1400s) in Korea was completed in the early of 2011. This fuel had been jointly developed through the extensive out-of-pile tests with Westinghouse for three years since 1999. The irradiation tests for the in-reactor verification using four lead test assemblies (LTAs) had been started in Ulchin unit 3 in 2002. During the overhaul period after each irradiation test, the eight (8) burnup-dependent parameters were measured without disassembling using the precise measurement systems in pool-side. After three cycle irradiations, one test assembly was disassembled and the rod-wise inspection on twenty rods was performed. During this stage, five (5) parameters were measured and evaluated. Among these twenty rods, ten rods including skeleton were sent to hot-cell test facility for further detailed examination and are currently being examined. After in-reactor verifications during two cycles, this fuel was commercially supplied to eight (8) OPR1000s sequentially. Currently all eight (8) OPR1000s were replaced with this fuel. In addition, this fuel is going to be supplied to four (4) APR1400s being constructed in Braka, UAE as well as four(4) OPR1000s and four(4) APR1400s being constructed in Korea. In the meanwhile, the surveillance program for the commercially supplied fuel has been launched to confirm growth, creep, corrosion and deformation, etc. obtained during LTA irradiation. Four (4) limiting fuel assemblies, that is, two (2) assemblies to be discharged after 2 cycle irradiations and the other two (2) after 3 cycle irradiations were selected for this surveillance program. Irradiation data of commercially supplied fuels are compared and confirmed to LTA irradiation performance behaviors on this paper. Among the eight (8) burnup-dependent parameters, the interesting ones were irradiation

  10. Irradiation-Induced Nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Birtcher, R.C.; Ewing, R.C.; Matzke, Hj.; Meldrum, A.; Newcomer, P.P.; Wang, L.M.; Wang, S.X.; Weber, W.J.

    1999-08-09

    This paper summarizes the results of the studies of the irradiation-induced formation of nanostructures, where the injected interstitials from the source of irradiation are not major components of the nanophase. This phenomena has been observed by in situ transmission electron microscopy (TEM) in a number of intermetallic compounds and ceramics during high-energy electron or ion irradiations when the ions completely penetrate through the specimen. Beginning with single crystals, electron or ion irradiation in a certain temperature range may result in nanostructures composed of amorphous domains and nanocrystals with either the original composition and crystal structure or new nanophases formed by decomposition of the target material. The phenomenon has also been observed in natural materials which have suffered irradiation from the decay of constituent radioactive elements and in nuclear reactor fuels which have been irradiated by fission neutrons and other fission products. The mechanisms involved in the process of this nanophase formation are discussed in terms of the evolution of displacement cascades, radiation-induced defect accumulation, radiation-induced segregation and phase decomposition, as well as the competition between irradiation-induced amorphization and recrystallization.

  11. Evaluation on thermal-hydraulic characteristics for passive safety device of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Seong Yeon; Lee, S. H.; Son, M. K. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Jee, M. S.; Chung, M. H. [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-07-15

    To establish evaluation and verification guideline for the APR1400, thermal-hydraulic characteristics for fuel rod bundle, reactor vessel and fluidic device is analyzed using FLUENT. Scope and major results of research are as follows : Thermal-hydraulic characteristics for nuclear fuel rod bundle: design data for nuclear fuel rod bundle and structure are surveyed, and 3 x 3 sub-channel model is adopted to investigate the fluid flow and heat transfer characteristics in fuel rod bundle. Computational results are compared with the heat transfer data measured by naphthalene sublimation method, and numerical analysis and evaluation are performed at various design conditions and flow conditions. Thermal-hydraulic characteristics for reactor vessel: reactor vessel design data are surveyed to develop numerical model. Porous media model is applied for fuel rod bundle, and full-scale, three dimensional simulation is performed at actual operating conditions. Distributions of velocity, pressure and temperature are discussed. Flow characteristics for fluidic device: three dimensional numerical model for fluidic device is developed, and numerical results are compared with experimental data obtained at KAERI in order to verify numerical simulation. In addition, variation of flow rate is investigated at various elapsed times after valve operating, and flow characteristics is analyzed at low and high flow rate conditions, respectively.

  12. Modeling of melt retention in EU-APR1400 ex-vessel core catcher

    Energy Technology Data Exchange (ETDEWEB)

    Granovsky, V. S.; Sulatsky, A. A.; Khabensky, V. B.; Sulatskaya, M. B. [Alexandrov Research Inst. of Technology NITI, Sosnovy Bor (Russian Federation); Gusarov, V. V.; Almyashev, V. I.; Komlev, A. A. [Saint Petersburg State Technological Univ. SPbSTU, St.Petersburg (Russian Federation); Bechta, S. [KTH, Stockholm (Sweden); Kim, Y. S. [KHNP, 1312 Gil 70, Yuseongdaero, Yuseong-gu, Daejeon (Korea, Republic of); Park, R. J.; Kim, H. Y.; Song, J. H. [KAERI, 989 Gil 111, Daedeokdaero, Yuseong-gu, Daejeon (Korea, Republic of)

    2012-07-01

    A core catcher is adopted in the EU-APR1400 reactor design for management and mitigation of severe accidents with reactor core melting. The core catcher concept incorporates a number of engineering solutions used in the catcher designs of European EPR and Russian WER-1000 reactors, such as thin-layer corium spreading for better cooling, retention of the melt in a water-cooled steel vessel, and use of sacrificial material (SM) to control the melt properties. SM is one of the key elements of the catcher design and its performance is critical for melt retention efficiency. This SM consists of oxide components, but the core catcher also includes sacrificial steel which reacts with the metal melt of the molten corium to reduce its temperature. The paper describes the required properties of SM. The melt retention capability of the core catcher can be confirmed by modeling the heat fluxes to the catcher vessel to show that it will not fail. The fulfillment of this requirement is demonstrated on the example of LBLOCA severe accident. Thermal and physicochemical interactions between the oxide and metal melts, interactions of the melts with SM, sacrificial steel and vessel, core catcher external cooling by water and release of non-condensable gases are modeled. (authors)

  13. Development of a Human Performance Evaluation Support System for Human Factors Validation of MCR MMI Design in APR-1400

    International Nuclear Information System (INIS)

    Ha, Jun Su; Seong, Poong Hyun

    2005-01-01

    As CRT-based display and advanced information technology were applied to advanced reactors such as APR-1400 (Advanced Power Reactor-1400), human operators' tasks became more cognitive works. As a results, Human Factors Engineering (HFE) became more important in designing the MCR (Main Control Room) MMI (Man-Machine Interface) of an advanced reactor. According to the Human Factors Engineering Program Review Model, human factors validation of MCR MMI design should be performed through performance-based tests to determine whether it acceptably supports safe operation of the plant. In order to support the evaluation of the performance, a HUman Performance Evaluation Support System (HUPESS) is in development

  14. Food irradiation

    International Nuclear Information System (INIS)

    Luecher, O.

    1979-01-01

    Limitations of existing preserving methods and possibilities of improved food preservation by application of nuclear energy are explained. The latest state-of-the-art in irradiation technology in individual countries is described and corresponding recommendations of FAO, WHO and IAEA specialists are presented. The Sulzer irradiation equipment for potato sprout blocking is described, the same equipment being suitable also for the treatment of onions, garlic, rice, maize and other cereals. Systems with a higher power degree are needed for fodder preserving irradiation. (author)

  15. Food irradiation

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Food preservation by irradiation is one part of Eisenhower's Atoms for Peace program that is enjoying renewed interest. Classified as a food additive by the Food, Drug, and Cosmetic Act of 1958 instead of a processing technique, irradiation lost public acceptance. Experiments have not been done to prove that there are no health hazards from gamma radiation, but there are new pressures to get Food and Drug Administration approval for testing in order to make commercial use of some radioactive wastes. Irradiation causes chemical reactions and nutritional changes, including the destruction of several vitamins, as well as the production of radiolytic products not normally found in food that could have adverse effects. The author concludes that, lacking epidemiological evidence, willing buyers should be able to purchase irradiated food as long as it is properly labeled

  16. Facts about food irradiation: Packaging of irradiated foods

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet considers the effects on packaging materials of food irradiation. Extensive research has shown that almost all commonly used food packaging materials toted are suitable for use. Furthermore, many packaging materials are themselves routinely sterilized by irradiation before being used. 2 refs

  17. Cost-benefit analysis of irradiation of vegetables and fruits at the Shanghai irradiation centre

    International Nuclear Information System (INIS)

    Xu Zhicheng; Sha Zhenyuan

    1993-01-01

    Differences between the developing and the developed countries in development and application of food irradiation are discussed, including the objectives of irradiation, scale, and the operation and control of facilities. These represent the chief problems of development of food irradiation in the developing countries. A proposal concerning the economic benefit of a gamma irradiation facility is discussed. In the light of many years' operating experience at the Shanghai Irradiation Centre, the operation cost per hour and coefficient of economic benefit are presented. These data can be used to estimate the economic benefit of gamma irradiated products at any time, and are useful for directing the daily operation of gamma irradiation facilities. From examples of cost-benefit analysis of irradiated garlic and apples it is shown that to improve the benefit of gamma irradiation facilities the annual hours of operation must be increased, so as to reduce the cost of operation. Food irradiated with a low dose provides more economic benefit than other irradiated products; the coefficients of economic benefit will increase as the irradiated processing throughput increases. Practical examples are given relating to garlic and apples, showing the economic benefit to wholesalers and retailers. (author). 4 refs, 3 figs, 7 tabs

  18. Detection of irradiated strawberries by identifying ESR peak of irradiated cellulose component

    International Nuclear Information System (INIS)

    Goto, Michiko; Tanabe, Hiroko

    2002-01-01

    The method of detecting low-dose irradiated strawberries by identifying ESR peak of irradiated cellulose component was studied. Ratio of peak height (S) of high magnetic field cellulose component, and noise width (N) of either irradiated or unirradiated seeds of strawberries were compared. In this study, sample was identified to be irradiated when S/N ratio of ESR spectrum of 4 min. sweep time was above 0.7. In the case of S/N ratio below 0.7, when the S/N ratio of integrated ESR spectrum, obtained from measuring 10 times with 1 min. sweep time was above 1.0, the sample was identified to be irradiated. The result suggests that S/N ratio is a good marker to detect the irradiation. The strawberries irradiated above 0.5kGy was able to be detected after 3 days storage at room temperature, after 21 days refrigeration and after 60 days freezing, respectively. (author)

  19. Irradiation and Post-Irradiation Storage of Chicken: Effects on Fat and Proteins

    International Nuclear Information System (INIS)

    Abou-Tarboush, H.M.; Al-Kahtani, H.A.; Abou-Arab, A.A.; Atia, M.; Bajaber, A.S.; Ahmed, M.A.; El-Mojaddidi, M.A.

    1997-01-01

    Chicken were subjected to gamma irradiation doses of 2.5, 5.0, 7.5 and 10.0 KGy and post-irradiation storage of 21 days at 4±2º. The effects on fat and protein of chicken were studied. Rate of formation of total volatile basic-nitrogen was less in irradiated samples particularly in samples treated with 5.0KGy during the entire storage. Fatty acid profiles of chicken lipids were not significantly (P≤ 0.05) affected by irradiation especially at doses of 5.0 KGy. However, irradiation caused a large increase in thiobarbituric acid (TBA) values which continued gradually during storage. Changes in amino acids were minimal. Irradiated and unirradiated samples showed the appearance of protein subunits with molecular weights in the range of 10.0 to 88.0 and 10.0 to 67.0 KD, respectively. No changes were observed in the sarcoplasmic protein but the intensity of bands in all irradiated samples decreased after 21 days of storage

  20. Food irradiation: fiction and reality

    International Nuclear Information System (INIS)

    1991-01-01

    The International Consultative Group on Food Irradiation (IGCFI), sponsored by World Health Organization (WHO), Food and Agriculture Organization (FAO) and the International Atomic Energy Agency (IAEA), with the intention to provide to governments, especially those of developing countries, scientifically correct information about food irradiation, decided to organize a file and questions of general public interest. The document is composed by descriptive files related with the actual situation and future prospective, technical and scientific terms, food irradiation and the radioactivity, chemical transformations in irradiated food, genetic studies, microbiological safety of irradiated food, irradiation and harmlessness, irradiation and additives, packing, irradiation facilities control, process control, irradiation costs and benefits as well as consumers reaction

  1. Post-external radiotherapy hypothyroidism: 15 cases; Hypothyroidie apres radiotherapie externe. A propos de 15 cas

    Energy Technology Data Exchange (ETDEWEB)

    Kaffel, N.; Mnif, M.; Abid, M. [Centre Hospitalier Universitaire Hedi Chaker, Sfax (Tunisia); Daoud, J. [Centre Hospitalier Universitaire Habib Bourguiba, Sfax (Tunisia)

    2001-06-01

    Post-external radiotherapy hypothyroidism: 15 cases. Hypothyroidism frequency is estimated to be between 10 and 45% after radiotherapy alone, and 40 to 67% after radiotherapy associated with thyroidectomy. This hypothyroidism is infra-clinical in 60% of the cases. Our study concerned 15 cases of hypothyroidism after external radiotherapy delivered between and 1991 and 1999. An irradiation of the cervical, cerebral and thorax regions was indicated for different types of cancers. Larynx carcinoma epidermoid was the most frequent cancer (seven cases); the radiation treatment used cobalt 60 with conventional fractionation, i.e., 2 Gy per treatment, five treatments a week. In nine cases, the hypothyroidism was discovered during a systematic examination; it was clinically evident in the six remaining cases. Hypothyroidism appeared after an irradiation dose average of 50 Gy (extremes 30-65 Gy). The average duration of the irradiation was about 7 weeks and the hypothyroidism appeared in a mean 22 months. In all cases, the substituting treatment was initiated with a favorable progression. Faced with the risk of hypothyroidism, it is necessary to check patients who have undergone external irradiation of the neck. (authors)

  2. Irradiation of food

    International Nuclear Information System (INIS)

    Lindell, B.; Danielsson-Tham, M.L.; Hoel, C.

    1983-01-01

    A committee has on instructions from the swedish government made an inquiry into the possible effects on health and working environment from irradition of food. In this report, a review is presented on the known positiv and negative effects of food irradiation Costs, availabilty, shelf life and quality of irradiated food are also discussed. According to the report, the production of radiolysis products during irradiation is not easily evaluated. The health risks from irradiation of spices are estimated to be lower than the risks associated with the ethenoxid treatment presently used. (L.E.)

  3. Facts about food irradiation: Food irradiation costs

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet gives the cost of a typical food irradiation facility (US $1 million to US $3 million) and of the food irradiation process (US $10-15 per tonne for low-dose applications; US $100-250 per tonne for high-dose applications). These treatments also bring consumer benefits in terms of availability, storage life and improved hygiene. 2 refs

  4. Facts about food irradiation: Nutritional quality of irradiated foods

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet briefly considers the nutritional value of irradiated foods. Micronutrients, especially vitamins, are sensitive to any food processing method, but irradiation does not cause any special nutritional problems in food. 4 refs

  5. Saturation behavior of irradiation hardening in F82H irradiated in the HFIR

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Shiba, K.; Tanigawa, H.; Ando, M. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Klueh, R.L. [Oak Ridge National Laboratory, TN (United States); Stoller, R. [ORNL - Oak Ridge National Laboratory, Materials Science and Technology Div., Oak Ridge, AK TN (United States)

    2007-07-01

    Full text of publication follows: Post irradiation tensile tests on reduced activation ferritic/martensitic steel, F82H have been conducted over the past two decades using Japan Materials Testing Reactor (JMTR) of JAEA, and Fast Flux Testing Facility (FFTF) of PNNL and High Flux Isotope Reactor (HFIR) of ORNL, USA, under Japan/US collaboration programs. According to these results, F82H does not demonstrate irradiation hardening above 673 K up to 60 dpa. The current study has been concentrated on hardening behavior at temperature around 573 K. A series of low temperature irradiation experiment has been conducted at the HFIR under the international collaborative research between JAEA/US-DOE. In this collaboration, the irradiation condition is precisely controlled by the well matured capsule designing and instrumentation. This paper summarizes recent results of the irradiation experiments focused on F82H and its modified steels compared with the irradiation properties database on F82H. Post irradiation tensile tests have been conducted on the F82H and its modified steels irradiated at 573 K and the dose level was up to 25 dpa. According to these results, irradiation hardening of F82H is saturated by 9 dpa and the as-irradiated 0.2 % proof stress is less than 1 GPa at ambient temperature. The deterioration of total elongation was also saturated by 9 dpa irradiation. The ductility of some modified steels which showed larger total elongation than that of F82H before irradiation become the same level as that of standard F82H steel after irradiation, even though its magnitude of irradiation hardening is smaller than that of F82H. This suggests that the more ductile steel demonstrates the more ductility loss at this temperature, regardless to the hardening level. The difference in ductility loss behavior between various tensile specimens will be discussed as the ductility could depend on the specimen dimension. (authors)

  6. 16-rod-bundle: Irradiation in the MZFR and post-irradiation examinations

    International Nuclear Information System (INIS)

    Manzel, R.

    1979-04-01

    In the course of the irradiation of a 16-rod prototype bundle, the basis has been established for the irradiation of experimental fuel assemblies containing full-length PWR fuel rods in standard positions of the MZFR. The prototype bundle was discharged after an irradiation time of 284 full power days and a burnup of 11400 MWd/tU. The overall performance of the prototype bundle was highly satisfactory. Detailed post-irradiation examinations confirmed the good conditions of bundle structures and fuel rods. (orig.) [de

  7. Conceptual design of passive containment cooling system with air holdup tanks of improved APR+

    International Nuclear Information System (INIS)

    Jeon, Byong Guk; Cheon No, Hee

    2014-01-01

    In Korea, after the successful validation of passive auxiliary feedwater system (PAFS), a passive containment cooling system (PCCS) gets attention for future development. We suggested PCCS design based on APR+, an advanced PWR developed in Korea, and performed scoping analysis. On the extension of the simple scoping analysis, MARS simulation is performed to incorporate the behavior of water pool outside the containment as well as steam-air mixture inside the containment. Through the simulation we demonstrated the effectiveness of the air holdup tank (AHT). Also we investigated the effect of the models of heat transfer coefficients between steam-air mixture side and water side, and flow instability inside HX tubes. The presence of AHT enables us to reduce the number of required HX tubes more than half through an increase in the heat transfer coefficients due to the reduction of air fraction in the containment. Finally flow instability was observed and mitigated by putting orifice plates at the inlet of tubes, increasing height of return nozzle, and increasing a tube angle. (authors)

  8. Mechanical properties of irradiated and non-irradiated Zr1%Nb and Zircaloy claddings

    International Nuclear Information System (INIS)

    Griger, Agnes

    2004-01-01

    The mechanical properties of irradiated and non-irradiated Zr1%Nb were determined and they were compared with the analogous properties of Zircaloy-4 to establish connections between the evolution of mechanical parameters of Zr1%Nb and Zircaloy-4 cladding materials and the measure of irradiation. Samples were irradiated in the vertical channels of the Budapest Research Reactor for different time periods at 50-65 C temperature. The measure of irradiation (fluent) for different samples was estimated by means of flux measurement and using the effective irradiation time. Post irradiation uniaxial tension tests in transverse direction were carried out on ring specimens. The mechanical parameters of the Zr1%Nb alloy significantly improve due to the effect of irradiation. However, the values of mechanical parameters do not further increase when the fluent increases above 10 20 n/cm 2 . These results are in good accordance with the Russian ones [1]. Contrary to the behaviour of Zr1%Nb alloy, the mechanical parameters of the Zircaloy practically do not change on the effect of irradiation. The originally high values of ultimate tensile strength and yield stress change only slightly with the increasing fluent in the investigated fluent-region. (Author)

  9. Irradiation enhanced diffusion and irradiation creep tests in stainless steel alloys

    International Nuclear Information System (INIS)

    Loelgen, R.H.; Cundy, M.R.; Schuele, W.

    1977-01-01

    A review is given of investigations on the rate of phase changes during neutron and electron irradiation in many different fcc alloys showing either precipitation or ordering. The diffusion rate was determined as a function of the irradiation flux, the irradiation temperature and the irradiation dose. It was found that the radiation enhanced diffusion in all the investigated alloys is nearly temperature independent and linearly dependent on the flux. From these results conclusions were drawn concerning the properties of point defects and diffusion mechanisms rate determining during irradiation, which appears to be of a common nature for fcc alloys having a similar structure to those investigated. It has been recognized that the same dependencies which are found for the diffusion rate were also observed for the irradiation creep rate in stainless steels, as reported in literature. On the basis of this obervation a combination of measurements is suggested, of radiation enhanced diffusion and radiation enhanced creep in stainless steel alloys. Measurements of radiation enhanced diffusion are less time consuming and expensive than irradiation creep tests and information on this property can be obtained rather quickly, prior to the selection of stainless steel alloys for creep tests. In order to investigate irradiation creep on many samples at a time two special rigs were developed which are distinguished only by the mode of stress applied to the steel specimens. Finally, a few uniaxial tensile creep tests will be performed in fully instrumented rigs. (Auth.)

  10. Food irradiation

    International Nuclear Information System (INIS)

    Hetherington, M.

    1989-01-01

    This popular-level article emphasizes that the ultimate health effects of irradiated food products are unknown. They may include vitamin loss, contamination of food by botulism bacteria, mutations in bacteria, increased production of aflatoxins, changes in food, carcinogenesis from unknown causes, presence of miscellaneous harmful chemicals, and the lack of a way of for a consumer to detect irradiated food. It is claimed that the nuclear industry is applying pressure on the Canadian government to relax labeling requirements on packages of irradiated food in order to find a market for its otherwise unnecessary products

  11. The Development and Evaluation of Inherent RPCS for the APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae D.; Ryu, Seok H.; Jung, Dong C.; Kim, Joon S.; Baek, Byung C.; Sung, Song K.; You, Guk J. [KNF, Daejeon (Korea, Republic of); Kim, Han G. [KHNP, Daejeon (Korea, Republic of); Chi, Sung G. [KOPEC, Daejeon (Korea, Republic of)

    2008-10-15

    The APR1400 RPCS (Reactor Power Cutback System) is designed to rapidly reduce the core power to eliminate the need for a reactor trip following a large load rejection or a loss of two main feedwater pumps at high power. GDC (General Design Criteria) 25 says 'Protection system requirements for reactivity control malfunctions. The protection system shall be designed to assure that SAFDL (Specified Acceptable Fuel Design Limits) are not exceeded for any single malfunction of the reactivity control systems, such as accidental withdrawal (not ejection or dropout) of control rods.' In order to comply GDC 25, CPCS (Core Protection Calculator System) will apply a big power penalty({approx} 1.3) to determine the minimum DNBR (Departure from Nucleate Boiling Ratio), the maximum LPD(Local Power Density) and reactor may immediately trip by CPCS low DNBR and high LPD during high power operation for 12-finger CEA drop. The purpose of this study is to develop the inherent RPCS to avoid unwanted reactor trips due to a 12-finger CEA drop. In order to accomplish this purpose, the CPCS should be modified to send RPCS actuation signal and not to apply power penalty due to 12-finger CEA drop for a shot period. During this period which is determined by assessment of safety, the SAFDL will not be violated without any CPCS trip function. The system and CPCS performance is evaluated to verify that CPCS trip does not occurred during 12-finger CEA drop event.

  12. Irradiation Facilities at CERN

    CERN Document Server

    Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

    2017-01-01

    CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

  13. Isolation of chlamydia in irradiated and non-irradiated McCoy cells

    International Nuclear Information System (INIS)

    Johnson, L.; Harper, I.A.

    1975-01-01

    Specimens from eye and genital tract were cultured in parallel in irradiated and non-irradiated McCoy cells and the frequency of isolation of chlamydia using these culture methods was compared. There was a significant difference between the frequencies of isolation; irradiated McCoy cells produced a greater number of positive results. (author)

  14. HRB-22 capsule irradiation test for HTGR fuel. JAERI/USDOE collaborative irradiation test

    Energy Technology Data Exchange (ETDEWEB)

    Minato, Kazuo; Sawa, Kazuhiro; Fukuda, Kousaku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; and others

    1998-03-01

    As a JAERI/USDOE collaborative irradiation test for high-temperature gas-cooled reactor fuel, JAERI fuel compacts were irradiated in the HRB-22 irradiation capsule in the High Flux Isotope Reactor at the Oak Ridge National Laboratory (ORNL). Postirradiation examinations also were performed at ORNL. This report describes 1) the preirradiation characterization of the irradiation samples of annular-shaped fuel compacts containing the Triso-coated fuel particles, 2) the irradiation conditions and fission gas releases during the irradiation to measure the performance of the coated particle fuel, 3) the postirradiation examinations of the disassembled capsule involving visual inspection, metrology, ceramography and gamma-ray spectrometry of the samples, and 4) the accident condition tests on the irradiated fuels at 1600 to 1800degC to obtain information about fuel performance and fission product release behavior under accident conditions. (author)

  15. PCI/SCC failure behavior of KWU/CE fuel rods

    International Nuclear Information System (INIS)

    Kikuchi, Akira

    1983-10-01

    The Over Ramp (Studsvik Over Ramp-STOR) project is an international power ramping irradiation program for studying PCI/SCC failure behavior of PWR-fuel rods. The project had its activities for about three years (Apr., 1977 - Dec., 1980) as the cooperation works of twelve participants composing nine countries. The present report introduces the irradiation data on the KWU/CE fuel rods in the project and discusses the failure behavior of PWR-fuel rods. (author)

  16. Planning of irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Caha, A; Krystof, V [Vyzkumny Ustav Klinicke a Experimentalni Onkologie, Brno (Czechoslovakia)

    1979-07-01

    The principles are discussed of the planning of irradiation, ie., the use of the various methods of location of a pathological focus and the possibility of semiautomatic transmission of the obtained data on a two-dimensional or spatial model. An efficient equipment is proposed for large irradiation centres which should cooperate with smaller irradiation departments for which also a range of apparatus is proposed. Irradiation planning currently applied at the Research Institute of Clinical and Experimental Oncology in Brno is described. In conclusion, some of the construction principles of semi-automatic operation of radiotherapy departments are discussed.

  17. Economics of gamma irradiation processing

    International Nuclear Information System (INIS)

    Tani, Toshio

    1980-01-01

    The gamma-ray irradiation business started at the Takasaki Laboratory of Japan Atomic Energy Research Institute. The irradiation facilities were constructed thereafter at various sites. The facilities must accept various types of irradiation, and must be constructed as multi-purpose facilities. The cost of irradiation consists of the cost of gamma sources, construction expense, personnel expense, management expense, and bank interest. Most of the expenses are considered to be fixed expense, and the amount of irradiation treatment decides the original costs of work. The relation between the irradiation dose and the construction expense shows the larger facility is more economical. The increase of amount of treatment reduces the original cost. The utilization efficiency becomes important when the amount of treatment and the source intensity exceed some values. The principal subjects of gamma-ray irradiation business are the sterilization of medical tools and foods for aseptic animals, the improvement of quality of plastic goods, and the irradiation of foods. Among them, the most important subject is the sterilization of medical tools. The cost of gamma irradiation per m 3 in still more expensive than that by ethylene oxide gas sterilization. However, the demand of gamma-ray irradiation is increasing. For the improvement of quality of plastic goods, electron irradiation is more favourable than the gamma irradiation. In near future, the economical balance of gamma irradiation can be achieved. (Kato, T.)

  18. Development of irradiation rig in HTTR and dosimetry method. I-I type irradiation equipment

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Taiju; Kikuchi, Takayuki [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Miyamoto, Satoshi; Ogura, Kazutomo [Japan Atomic Power Co., Tokyo (Japan)

    2002-12-01

    The High Temperature Engineering Test Reactor (HTTR) is a graphite-moderated, helium gas-cooled test reactor with a maximum power of 30 MW. The HTTR aims not only to establish and upgrade the technological basis for the HTGRs but also to perform the innovative basic research on high temperature engineering with high temperature irradiation fields. It is planned that the HTTR is used to perform various engineering tests such as the safety demonstration test, high temperature test operation and irradiation test with large irradiation fields at high temperatures. This paper describes the design of the I-I type irradiation equipment developed as the first irradiation rig for the HTTR and does the planned dosimetry method at the first irradiation test. It was developed to perform in-pile creep test on a stainless steel with large standard size specimens in the HTTR. It can give great loads on the specimens stably and can control the irradiation temperature precisely. The in-core creep properties on the specimens are measured by newly developed differential transformers and the irradiation condition in the core is monitored by thermocouples and self-powered neutron detectors (SPNDs), continuously. The irradiated neutron fluence is assessed by neutron fluence monitors of small metallic wires after the irradiation. The obtained data at the first irradiation test can strongly be contributed to upgrade the technological basis for the HTGRs, since it is the first direct measurement of the in-core irradiation environments of the HTTR. (author)

  19. Advanced disassembling technique of irradiated driver fuel assembly for continuous irradiation of fuel pins

    International Nuclear Information System (INIS)

    Ichikawa, Shoichi; Haga, Hiroyuki; Katsuyama, Kozo; Maeda, Koji; Nishinoiri, Kenji

    2012-01-01

    It was necessary to carry out continuous irradiation tests in order to obtain the irradiation data of high burn-up fuel and high neutron dose material for FaCT (Fast Reactor Cycle Technology Development) project. There, the disassembling technique of an irradiated fuel assembly was advanced in order to realize further continuous irradiation tests. Although the conventional disassembling technique had been cutting a lower end-plug of a fuel pin needed to fix fuel pins to an irradiation vehicle, the advanced disassembling technique did not need cutting a lower end-plug. As a result, it was possible to supply many irradiated fuel pins to various continuous irradiation tests for FaCT project. (author)

  20. Food irradiation: Activities and potentialities

    Science.gov (United States)

    Doellstaedt, R.; Huebner, G.

    After the acceptance of food irradiation up to an overall average dose of 10 kGy recommended by the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food in October 1980, the G.D.R. started a programme for the development of techniques for food irradiation. A special onion irradiator was designed and built as a pilot plant for studying technological and economic parameters of the irradiation of onions. The new principle of bulk-cargo irradiation allows the integration of this technology into the usual harvest technology for onions on the way from field to storage. Scientific and applied research work has been carried out in the past 3 yr on the irradiation of spices, potatoes, eviscerated chicken, animal feeds, fodder yeast, drugs and vaccines. In connection with the irradiation of eviscerated chicken, fodder yeast and animal feeds the basis of an antisalmonella programme has been discussed. Germ-count-reduced spices were employed for the production of test charges of preserves and tinned products. The results have led to the decision to design and build a new multipurpose irradiator for food irradiation. In order to cover the legal aspects of food irradiation the Ministry of Health issued regulations concerning the recommendation of irradiated food in the G.D.R.

  1. Comparison of serpent and triton generated FEW group constants for APR1400 nuclear reactor core

    International Nuclear Information System (INIS)

    Elsawi, Mohamed A.; Alnoamani, Zainab

    2015-01-01

    The accuracy of full-core reactor power calculations using diffusion codes is strongly dependent on the quality of the homogenized cross sections and other few-group constants generated by lattice codes. For many years, deterministic lattice codes have been used to generate these constants using different techniques: the discrete ordinates, collision probability or the method of characteristics, just to name a few. These codes, however, show some limitations, for example, on complex geometries or near heavy absorbers as in modern pressurized water reactor (PWR) designs like the Korean Advanced Power Reactor 1400 (APR1400) core. The use of continuous-energy Monte Carlo (MC) codes to produce nuclear constants can be seen as an attractive option when dealing with fuel or reactor types that lie beyond the capabilities of conventional deterministic lattice transport codes. In this paper, the few-group constants generated by two of the state-of-the-art reactor physics codes, SERPENT and SCALE/TRITON, will be critically studied and their reliability for being used in subsequent diffusion calculations will be evaluated. SERPENT is a 3D, continuous-energy, Monte Carlo reactor physics code which has a built-in burn-up calculation capability. It has been developed at the Technical Research Center of Finland (VTT) since 2004. SCALE/TRITON, on the other hand, is a control module developed within the framework of SCALE package that enables performing deterministic 2-D transport calculations on nuclear reactor core lattices. The approach followed in this paper is as follows. First, the few-group nuclear constants for the APR1400 reactor core were generated using SERPENT (version 2.1.22) and NEWT (in SCALE version 6.1.2) codes. For both codes, the critical spectrum, calculated using the B1 method, was used as a weighting function. Second, 2-D diffusion calculations were performed using the US NRC core simulator PARCS employing the two few-group constant sets generated in the first

  2. Food Irradiation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kawabata, T.

    1981-09-15

    Since 1967 research activities on food irradiation in Japan have been carried out under the National Food Irradiation Programme by the Japanese Atomic Energy Commission. The programme has been concentrated on the technological and economical feasibility and wholesomeness testings of seven irradiated food items of economic importance to the country, i.e. potatoes, onions, wheat, rice, 'kamaboko' (fish-paste products), 'Vienna' sausages and mandarin oranges. By now most studies, including wholesomeness testings of these irradiated food items, have been completed. In Japan, all foods or food additives for sale are regulated by the Food Sanitation Law enforced in 1947. Based on studies made by the national programme, irradiated potatoes were given 'unconditional acceptance' for human consumption in 1972. At present, irradiated potatoes are the only food item which has so far been approved by the Minister of Health and Welfare. Unless the Minister of Health and Welfare has declared that items are not harmful to human health on obtaining comments from the Food Sanitation Investigation Council, no irradiated food can be processed or sold. In addition, the import of irradiated foodstuffs other than potatoes from foreign countries is prohibited by law.

  3. Irradiated foods and allergy. From a perspective of irradiation chemistry of proteins

    International Nuclear Information System (INIS)

    Miyahara, Makoto

    2003-01-01

    A change of protein in irradiated food has been known. There are a few reports on change of allergy of irradiated foods. Two kinds of allergy such as the immediate allergy (I type) and delayed allergy (IV type) are taken ill by foods. I type is related to irradiated foods. Allergen enters body through digestive tract. Anti body (IgE) is protein with from 10,000 to 100,000 molecular weight. Allergic disease is originated mainly by egg, milk, wheat, buckwheat, peanut and shrimp. When food is irradiated, the proteins are decomposed and produced higher and lower molecular compounds at the same time. Change of the viscosity and the sedimentation coefficient and deactivation of enzymes of β-lactoglobulin, cow albumin, egg albumin and casein were investigated. There is no report of increasing allergy by irradiation. However, some paper indicated that immunogenicity of protein was decreased by irradiation. (S.Y.)

  4. Development of food irradiation technology and consumer attitude toward irradiated food in Korea

    International Nuclear Information System (INIS)

    Kwon, Joong-Ho; Byun, Myung-Woo; Cho, Han-Ok

    1992-01-01

    In Korea, the well-integrated research of biological effects of radiation has been launched from the late 1960s. As research activities, the following food items have been dealt with: sprouting foods, fruits, mushrooms, grains, spices or mixed condiments, fish or fishery products, meat or meat products, and fermented foods. The usage of gamma radiation from 60 Co source is now authorized for food irradiation of the following items: potato, onion, garlic, chestnut, mushroom, dried mushroom, dried spices (including red pepper, garlic, black pepper, onion, ginger, and green onion), dried meat, powdered fish and shellfish, soybean paste powder, hot pepper paste powder, soybean sauce powder, and starch. Since the authorization of food irradiation in 1985, consumers' acceptance has been considered the most important. The survey evaluating the basic perception and attitule toward food irradiation revealed the following results. Consumers' awareness of food irradiation was 82%, with significantly higher in radiation workers than the general public (p<0.0001). Seventy-five percent distinguished the contaminated food by radionuclides from irradiated food. In purchasing irradiated foods, 50.9% required more information. The contribution of irradiated foods to wholesomeness was suspicious in 51%, acceptable in 33%, and uncertain in 16%. If information about the benefits of irradiation is provided to consumers, positive response was increased to 60%. The most critical impediment in the commercial application of food irradiation was found to have resulted from the general consumers' slow acceptance; however, consumers' attitude to irradiated food became positive if they understood the safety and advantages of this technology. The most important task is to overcome consumers' psychological resistance and transporting matters of the products to be irradiated. (N.K.)

  5. Development of detection methods for irradiated foods; development of immunological identification of irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyong Ae; Lee, Yoon Jin; Choi, Yoon Jung; Han, Su Kyong [Soonchunhyang University, Asan (Korea)

    2002-04-01

    Enzyme-linked Immunosorbent assay systems for the identification of irradiated egg, pork and chicken was developed. Eggs were irradiated in their shells to 0.5{approx}7kGy. Pork was irradiated to 0.5{approx}3kGy and chicken irradiated to 0.5kGy{approx}5kGy. The most sensitive proteins to irradiation were screened by SDS-PAGE and purified. Ovalbumin from egg, salt soluble protein(p) from pork, and salt soluble protein(c) from chicken showed the most sensitivity to irradiation. To investigate for a practical use in identifying of irradiated egg, pork and chicken, competitive ELISA was performed. The binding activity of ovalbumin to anti-ovalbumin IgG was reduced in a dose-dependent manner by irradiating up to 7kGy, and considerably lowered after irradiating at 7kGy. The concentration of 50% inhibition of ovalbumin to IgG was increased to 1.5(0.5kGy){approx}3.7(7kGy) times in an dose-dependent relationship. The binding activity of salt soluble protein(p) to anti-salt soluble protein IgG (anti-SSPp IgG)was also reduced in a dose-dependent manner by irradiating up to 3kGy, and considerably lowered after irradiating at 3kGy. The concentration of 50% inhibition of salt soluble protein to IgG was increased to 1.1(0.5kGy){approx}5.2(3kGy) times in a dose-dependent relationship. On the other hand, the binding activity of salt soluble protein(c) to anti-salt soluble protein IgG(anti-SSPc IgG) was reduced in a dose-dependent manner by irradiating up to 5kGy, too, and considerably lowered after irradiating at 5kGy. The concentration of 50% inhibition of salt soluble protein to IgG was increased to 1.1{approx}2.3 times in a dose-dependent relationship. SDS-PAGE of the irradiation sensitive proteins showed the partial breakdown of it was induced by irradiation. So, the lowering of binding activity was probably due to the partial breakdown of ovalbumin by irradiation. 25 refs., 12 figs., 5 tabs. (Author)

  6. Analysis of Hydrogen Concentration Distribution during an SBO Accident for Shin-Ulchin APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jongtae; Hong, Seong Wan [Korea Atomic energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    To prohibit the accumulation of hydrogen, the containment volume is considered to reduce the hydrogen concentration, or hydrogen mitigation devices such as PARs or igniters are installed in the containment. In the case of the Fukushima NPPs, the applied strategy for the hydrogen safety is the use of a containment venting system (CVS). In this way, the hydrogen accumulated in the containment vessel is vented into the environment. One of the causes of the hydrogen explosions occurring in the containment buildings of the Fukushima NPPs is expected to be the failure of the venting system. The hydrogen was therefore easily accumulated in the containment building. It is uncertain what the ignition source for the hydrogen combustion was during the accident. However, it is not too conservative to assume that an ignition source exists at any time and any place in a containment during a core-melt accident. Shin-Ulchin 1 and 2, which are construction plants of an APR 1400, are two of the newest NPPs in Korea. They have many features to enhance the safety margin during a design-based and beyond-design-based accident. One of them is the in-containment refueling water storage tank (IRWST) located inside the containment. It is used as a sink/source for feed-bleed operation. When the core is damaged along an accident progression, the hydrogen generated in the RPV can be released into the IRWST of the APR1400 with steam and water. From a previous study, it was found that a highly concentrated hydrogen/air mixture can be developed if the hydrogen is released into the IRWST. In the case of Shin-Ulchin 1 and 2, the hydrogen mitigation strategy during a high-pressure accident such as a station blackout (SBO) is changed by installing a 3-way valve. When a severe accident management (SAM) for the plant is initiated, the flow path from a pressurizer to the IRWST is changed into a steam-generator (S/G) compartment by turning the 3-wat valve actively (pilot operated). By doing so, it is

  7. Irradiation of onions with the commercial potato irradiator

    International Nuclear Information System (INIS)

    Aoki, Shohei; Kawashima, Koji; Hayasi, Toru

    1983-01-01

    Three varieties of onion harvested in Hokkaido were irradiated with the Shohoro Potato Irradiator on 29th September, 1981. One ton of each of the varieties, Kitamiki (KI), Ohohtsuku (OH) and Furanui (FU), was used in this investigation. Onions had longer dormancy period in the order of FU>OH>KI. Higher sprouting percentage was obtained in the unirradiated onions, while they were stored at a higher temperature or stored for a longer period. Generally, unirradiated onions sprouted before they were deteriorated. Thus the number of deteriorated bulbs in the unirradiated onions was superficially less than that in the irradiated ones. When the onions which were taken from warehouses on 26th March, 1982 were stored at room temperature, the percentage of wholesome bulbs was higher in KI and OH than FU. Small buds in some of the irradiated onions turned dark after a long storage time. Quantitative estimation of this phenomena is left to be resolved. There was little relationship between the weight loss and the number of wholesome onions. (author)

  8. Irradiation of goods

    International Nuclear Information System (INIS)

    Lunt, R.E.

    1987-01-01

    Mechanical handling apparatus is adapted to handle goods, such as boxed fruit, during a process of irradiation, in palletized form. Palletized goods are loaded onto wheeled vehicles in a loading zone. Four vehicles are wheeled on a track into an irradiation zone via a door in a concrete shield. The vehicles are arranged in orthogonal relationship around a source of square section. Turntables are positioned at corners of the square shaped rail truck around the source selectively to turn the vehicles to align then with track sections. Mechanical manipulating devices are positioned in the track sections opposed to sides of the source. During irradiation, the vehicles and their palletized goods are cylically moved toward the source to offer first sides of the goods for irradiation and are retraced from the source and are pivoted through 90 0 to persent succeeding sides of the goods for irradiation

  9. Chemical changes after irradiation and post-irradiation storage in tilapia and Spanish mackerel

    International Nuclear Information System (INIS)

    Al-Kahtani, H.A.; Abu-Tarboush, H.M.; Bajaber, A.S.; Atia, M.; Abou-Arab, A.A.; El-Mojaddidi, M.A.

    1996-01-01

    Influence of gamma irradiation (1.5-10 kGy) and post-irradiation storage up to 20 days at 2 +/- 2 degrees C on some chemical criteria of tilapia and spanish mackerel were studied. Total volatile basic nitrogen formation was lower in irradiated fish than in the unirradiated. Irradiation also caused a larger increase in thiobarbituric acid values which continued gradually during storage. Some fatty acids decreased by irradiation treatments at all doses. Thiamin loss was more severe at higher doses (greater than or equal to 4.5 kGy), whereas riboflavin was not affected. Alpha and gamma tocopherols of tilapia and alpha, beta, gamma, and delta tocopherols, in Spanish mackerel, decreased with increased dose and continued to decrease during 20-day post-irradiation storage

  10. New facility for post irradiation examination of neutron irradiated beryllium

    International Nuclear Information System (INIS)

    Ishitsuka, Etsuo; Kawamura, Hiroshi

    1995-01-01

    Beryllium is expected as a neutron multiplier and plasma facing materials in the fusion reactor, and the neutron irradiation data on properties of beryllium up to 800 degrees C need for the engineering design. The acquisition of data on the tritium behavior, swelling, thermal and mechanical properties are first priority in ITER design. Facility for the post irradiation examination of neutron irradiated beryllium was constructed in the hot laboratory of Japan Materials Testing Reactor to get the engineering design data mentioned above. This facility consist of the four glove boxes, dry air supplier, tritium monitoring and removal system, storage box of neutron irradiated samples. Beryllium handling are restricted by the amount of tritium;7.4 GBq/day and 60 Co;7.4 MBq/day

  11. Gamma irradiation devices

    International Nuclear Information System (INIS)

    Foeldiak, Gabor; Stenger, Vilmos.

    1983-01-01

    The main parameters and the preparation procedures of the gamma radiation sources frequently applied for irradiation purposes are discussed. In addition to 60 Co and 137 Cs sources also the nuclear power plants offer further opportunities: spent fuel elements and products of certain (n,γ) reactions can serve as irradiation sources. Laboratory scale equipments, pilot plant facilities for batch or continuous operation, continuous industrial irradiators and special multipurpose, mobile and panorama type facilities are reviewed including those in Canada, USA, India, the Soviet Union, Hungary, UK, Japan and Australia. For irradiator design the source geometry dependence of the spatial distribution of dose rates can be calculated. (V.N.)

  12. Parametric relationships for gamma dose and irradiation homogeneity in a sewage sludge irradiator

    International Nuclear Information System (INIS)

    Krishnamurthy, K.

    1986-01-01

    A study on the inter-relationships between factors governing γ dose and irradiation homogeneity in a sewage sludge irradiator is presented here. The analysis involves a 60 Co irradiator of cylindrical irradiation geometry with batchwise operation for hygienisation of liquid sludge. The influence of the parameters such as the source-target geometry, strength of 60 Co sources in the irradiator, hygienisation dose and rheological and hydraulic characteristics of sewage sludge on the selection of the three critical factors viz. the pumping rate (P) required to maintain turbulent flow regime in the irradiation zone; the mininum re-circulation time (Tsub(m)) essential to achieve a certain degree of homogeneity of dose absorption in the fluid; and the irradiation time (Tsub(i)) required to impart the necessary dose for the desired hygienisation effect in the sludge has been discussed in detail and inter-relationships among these three factors have been worked out. The applicability of the relationships to a typical operating plant has also been elucidated. (author)

  13. Food irradiation - now

    International Nuclear Information System (INIS)

    Basson, R.A.

    1989-01-01

    Food irradiation technology in South Africa is about to take its rightful place next to existing food preservation methods in protecting food supplies. This is as a result of several factors, the most important of which is the decision by the Department of Health and Population Development to introduce compulsory labelling of food irradiation. The factors influencing food irradiation technology in South Africa are discussed

  14. Facts about food irradiation: Irradiation and food safety

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet focusses on the question of whether irradiation can be used to make spoiled food good. No food processing procedures can substitute for good hygienic practices, and good manufacturing practices must be followed in the preparation of food whether or not the food is intended for further processing by irradiation or any other means. 3 refs

  15. Irradiated film material and method of the irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    The irradiation of polymer film material is a strengthening procedure. To obtain a substantial uniformity in the radiation dosage profile, the film is irradiated in a trough having lateral deflection blocks adjacent to the film edges. These deflect the electrons towards the surface of the trough bottom for further deflection towards the film edge. (C.F.)

  16. Food irradiation and consumer values

    International Nuclear Information System (INIS)

    Bruhn, C.M.; Schutz, H.G.; Sommer, R.

    1988-01-01

    A mail survey technique was used to determine if value hierarchy, locus of control, innovativeness, and demographic parameters could distinguish between subjects expressing different levels of concern and willingness to buy irradiated food. Concern toward irradiated food was lower than concern for other food safety issues, probably because many expressed uncertainty regarding irradiation. Those ranking the value “an ecologically balanced world” expressed the greatest irradiation concern. Factors which could predict high irradiation concern were being highly concerned about the use of chemical sprays on food, completing more formal education and being female; those believing that life was controlled by luck were less concerned. Irradiation concern was a principal factor determining willingness to buy irradiated foods. Innovative consumers were more likely to try irradiated foods than noninnovative. Implications for consumer education are presented

  17. Irradiation, annealing, and reirradiation research in the ORNL heavy-section steel irradiation program

    International Nuclear Information System (INIS)

    Nanstad, R.K.; Iskander, S.K.; McCabe, D.E.; Sokolov, M.A.

    1997-01-01

    One of the options to mitigate the effects of irradiation on reactor pressure vessels (RPV) is to thermally anneal them to restore the toughness properties that have been degraded by neutron irradiation. This paper summarizes experimental results from work performed as part of the Heavy-Section Steel Irradiation (HSSI) Program managed by Oak Ridge National Laboratory (ORNL) for the U.S. Nuclear Regulatory Commission. The HSSI Program focuses on annealing and re-embrittlement response of materials which are representative of those in commercial RPVs and which are considered to be radiation-sensitive. Experimental studies include (1) the annealing of materials in the existing inventory of previously irradiated materials, (2) reirradiation of previously irradiated/annealed materials in a collaborative program with the University of California, Santa Barbara (UCSB), (3) irradiation/annealing/reirradiation of U.S. and Russian materials in a cooperative program with the Russian Research Center-Kurchatov Institute (RRC-KI), (4) the design and fabrication of an irradiation/anneal/reirradiation capsule and facility for operation at the University of Michigan Ford Reactor, (5) the investigation of potential for irradiation-and/or thermal-induced temper embrittlement in heat-affected zones (HAZs) of RPV steels due to phosphorous segregation at grain boundaries, and (6) investigation of the relationship between Charpy impact toughness and fracture toughness under all conditions of irradiation, annealing, and reirradiation

  18. Food irradiation makes progress

    International Nuclear Information System (INIS)

    Kooij, J. van

    1984-01-01

    In the past fifteen years, food irradiation processing policies and programmes have been developed both by a number of individual countries, and through projects supported by FAO, IAEA and WHO. These aim at achieving general acceptance and practical implementation of food irradiation through rigorous investigations of its wholesomeness, technological and economic feasibility, and efforts to achieve the unimpeded movement of irradiated foods in international trade. Food irradiation processing has many uses

  19. Advanced targets preparation for TNSA laser irradiation and their characterization

    Czech Academy of Sciences Publication Activity Database

    Ceccio, G.; Torrisi, L.; Cutroneo, Mariapompea

    2016-01-01

    Roč. 11, APR (2016), C04017 ISSN 1748-0221. [Conference on Plasma Physics by Laser and Applications (PPLA). Frascati, 05.10.2015-07.10.2015] Institutional support: RVO:61389005 Keywords : TOF * ion sources * plasma diagnostics Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.220, year: 2016

  20. KEY RESULTS FROM IRRADIATION AND POST-IRRADIATION EXAMINATION OF AGR-1 UCO TRISO FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Demkowicz, Paul A.; Hunn, John D.; Petti, David A.; Morris, Robert N.

    2016-11-01

    The AGR-1 irradiation experiment was performed as the first test of tristructural isotropic (TRISO) fuel in the US Advanced Gas Reactor Fuel Development and Qualification Program. The experiment consisted of 72 right cylinder fuel compacts containing approximately 3×105 coated fuel particles with uranium oxide/uranium carbide (UCO) fuel kernels. The fuel was irradiated in the Advanced Test Reactor for a total of 620 effective full power days. Fuel burnup ranged from 11.3 to 19.6% fissions per initial metal atom and time average, volume average irradiation temperatures of the individual compacts ranged from 955 to 1136°C. This paper focuses on key results from the irradiation and post-irradiation examination, which revealed a robust fuel with excellent performance characteristics under the conditions tested and have significantly improved the understanding of UCO coated particle fuel irradiation behavior within the US program. The fuel exhibited a very low incidence of TRISO coating failure during irradiation and post-irradiation safety testing at temperatures up to 1800°C. Advanced PIE methods have allowed particles with SiC coating failure to be isolated and meticulously examined, which has elucidated the specific causes of SiC failure in these specimens. The level of fission product release from the fuel during irradiation and post-irradiation safety testing has been studied in detail. Results indicated very low release of krypton and cesium through intact SiC and modest release of europium and strontium, while also confirming the potential for significant silver release through the coatings depending on irradiation conditions. Focused study of fission products within the coating layers of irradiated particles down to nanometer length scales has provided new insights into fission product transport through the coating layers and the role various fission products may have on coating integrity. The broader implications of these results and the application of

  1. Reactivation of UV- and γ-irradiated herpes virus in UV- and X-irradiated CV-1 cells

    International Nuclear Information System (INIS)

    Takimoto, K.; Niwa, O.; Sugahara, T.

    1982-01-01

    Enhanced reactivation of UV- and γ-irradiated herpes virus was investigated by the plaque assay on CV-1 monkey kidney monolayer cells irradiated with UV light or X-rays. Both UV- and X-irradiated CV-1 cells showed enhancement of survival of UV-irradiated virus, while little or no enhancement was detected for γ-irradiated virus assayed on UV- or X-irradiated cells. The enhanced reactivation of UV-irradiated virus was greater when virus infection was delayed 24 or 48 h, than for infection immediately following the irradiation of cells. Thus the UV- or X-irradiated CV-1 cells are able to enhance the repair of UV damaged herpes virus DNA, but not of γ-ray damaged ones. (author)

  2. Ingestion and digestion of erythrocytes by non-irradiated and irradiated macrophages

    Energy Technology Data Exchange (ETDEWEB)

    Vorbrodt, A; Grabska, A; Krzyzowska-Gruca, S; Gruca, S

    1975-01-01

    The effect of x rays (1300 R) and gamma irradiation (3000 R) on phagocytic activity of mouse peritoneal macrophages cultivated in vitro was studied using human glutaraldehyde-fixed red blood cells. The peroxidative activity of haemoglobin was cytochemically detected by the DAB method. The obtained results indicate that the applied dose of x irradiation does not affect the phagocytic activity of macrophages. On the contrary, the gamma irradiation (3000 R) causes acceleration of phagocytic activity of macrophages with concomitant impairment of intracellular digestion of ingested material. Weakened cytochemical reaction for acid phosphatase suggests that sufficiently high doses of irradiation cause some disturbances in the biosynthesis of lysosomal enzymes in exposed macrophages.

  3. Irradiation behavior evaluation of oxide dispersion strengthened ferritic steel cladding tubes irradiated in JOYO

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Shinichiro, E-mail: yamashita.shinichiro@jaea.go.jp; Yano, Yasuhide; Ohtsuka, Satoshi; Yoshitake, Tsunemitsu; Kaito, Takeji; Koyama, Shin-ichi; Tanaka, Kenya

    2013-11-15

    Irradiation behavior of ODS steel cladding tubes was evaluated for the further progress in understanding of the neutron-irradiation effects on ODS steel. Two types of ODS (9Cr–ODS{sub F}/M, 12Cr–ODS{sub F}) steel cladding tubes with differences in basic compositions and matrix phases were irradiated in JOYO. Post-irradiation examination data concerning hardness, ring tensile property, and microstructure were obtained. Hardness measurement after irradiation showed that there was an apparent irradiation temperature dependence on hardness for 9Cr–ODS{sub F}/M steel whereas no distinct temperature dependence for 12Cr–ODS{sub F} steel. Also, there was no significant change in tensile strengths after irradiation below 923 K, but those above 1023 K up to 6.6 × 10{sup 26} n/m{sup 2} (E > 0.1 MeV) were decreased by about 20%. TEM observations showed that the radiation-induced defect cluster formation during irradiation was suppressed because of high density sink site for defect such as initially-existed dislocation, and precipitate interfaces. In addition, oxide particles were stable up to the maximum doses of this irradiation test.

  4. Author Details

    African Journals Online (AJOL)

    Abalot, J. E.. Vol 4, No 1 (2000) - Articles Pratique corporelle et identité culturelle. Abstract. ISSN: 2413-354X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER ...

  5. Effect of irradiation spectrum on the microstructure of ion-irradiated Al2O3

    International Nuclear Information System (INIS)

    Zinkle, S.J.

    1994-01-01

    Polycrystalline samples of alpha-alumina have been irradiated with various ions ranging from 3.6 MeV Fe + to 1 MeV H + ions at 650 C. Cross-section transmission electron microscopy was used to investigate the depth-dependent microstructure of the irradiated specimens. The microstructure following irradiation was observed to be dependent on the irradiation spectrum. In particular, defect cluster nucleation was effectively suppressed in specimens irradiated with light ions such as 1 MeV H + ions. On the other hand, light ion irradiation tended to accelerate the growth rate of dislocation loops. The microstructural observations are discussed in terms of ionization enhanced diffusion processes

  6. Recent Advances in Food Irradiation Research in Japan; Recents Progres de l'Irradiation des Produits Alimentaires au Japon; Poslednie dostizheniya v issledovaniyakh po oblucheniyu produktov pitaniya v Yaponii; Progresos Recientes de las Investigaciones Sobre Irradiacion de Alimentos Realizadas en el Japon

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, A. [Laboratory of Radiation Biology, Institute of Physical and Chemical Research, Honkomagome, Bunkyo-Ku, Tokyo (Japan)

    1966-11-15

    , les modifications de qualite decelables immediatement apres l'irradiation se sont revelees insignifiantes apres huit mois de conservation d'apres l'analyse statistique des donnees organoleptiques. Deuxiemement, etude de l'elimination des agents biologiques et biochimiques nuisibles dans les produits, du point de vue de la sante publique. La sensibilite aux rayonnements de la toxine produite par Cl. botulinum E a ete etudiee en rapport avec l'innocuite des produits irradies. Troisiemement, l'utilisation des effets chimiques des rayonnements. On a etudie par exemple l'irradiation d'algues marines a des doses de 0,5 a 0,7 Mrad en vue d'ameliorer la qualite et la quantite de la gelose extraite, ainsi que l'acceleration, par des doses de rayonnement atteignant 0,5 Mrad, du vieillissement des boissons alcooliques, notamment des liqueurs distillees. Outre ces etudes de caractere pratique, on s'est occupe activement des problemes fondamentaux comprenant la radiosensibilisation des micro-organismes, l'inactivation des enzymes par les rayonnements et d'autres questions de radiochimie interessant l'irradiation des denrees alimentaires. (author) [Spanish] En la actualidad parecen perfilarse los planes para establecer en el Japon un programa nacional de irradiacion de alimentos orientado hacia los problemas fundamentales y practicos. La Comision de Energia Atomica ha comenzado ya a preparar el programa de estudios fundamentales y sus aplicaciones, que se emprendera probablemente en 1967. Gracias a la colaboracion de especialistas se ha constituido la Sociedad japonesa de investigaciones sobre irradiacion de alimentos; se espera que esta organizacion desempene una labor importante en la ejecucion del programa nacional. En la actualidad, el Japon dispone de unas 30 fuentes radioisotopicas del orden del kilocurie, y casi del mismo numero de generadores de electrones, incluidas varias plantas piloto de irradiacion. En el Japon los estudios practicos sobre irradiacion de alimentos se

  7. Alloys under irradiation

    International Nuclear Information System (INIS)

    Martin, G.; Bellon, P.; Soisson, F.

    1997-01-01

    During the last two decades, some effort has been devoted to establishing a phenomenology for alloys under irradiation. Theoretically, the effects of the defect supersaturation, sustained defect fluxes and ballistic mixing on solid solubility under irradiation can now be formulated in a unified manner, at least for the most simple cases: coherent phase transformations and nearest-neighbor ballistic jumps. Even under such restrictive conditions, several intriguing features documented experimentally can be rationalized, sometimes in a quantitative manner and simple qualitative rules for alloy stability as a function of irradiation conditions can be formulated. A quasi-thermodynamic formalism can be proposed for alloys under irradiation. However, this point of view has limits illustrated by recent computer simulations. (orig.)

  8. Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

    International Nuclear Information System (INIS)

    Biemiller, E.C.; Fyfitch, S.; Campbell, C.A.

    1993-01-01

    The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0.24 w/o copper, but different nickel contents at 0.63 w/o and 0.19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 1800 deg F) and to simulate Regulatory Guide 1.99 database materials (austenitized at 1600 deg. F). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (U. of Michigan Test Reactor) which had never been used for this type of irradiation program. Materials taken from plate surface locations (vs. 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, is maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (500 deg. F and 550 deg. F) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an increase in T 30 shift of 69 deg. F for a decrease in irradiation temperature of 50 deg. F. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel had no apparent effect on irradiation response. No apparent microstructure

  9. Some physical properties of irradiated and non-irradiated oxide glasses containing uranium

    International Nuclear Information System (INIS)

    Simon, V.; Ardelean, I.; Simon, S.; Cozar, O.; Milea, I.; Lupsa, I.; Mih, V.

    1995-01-01

    The x U O 3 (1-x) [2 P 2 O 5 · Na 2 O] non-irradiated and gamma irradiated glasses (0 3+ , U 4+ and U 5+ ions. The gamma irradiation induces paramagnetic defects around the glass network forming sites occupied by phosphorous atoms. The non-irradiated samples are weak paramagnetic up to x = 0.1. For higher U O 3 concentration (0.1 < x ≤ 0.2) the magnetic measurements indicated a larger number of paramagnetic ions which are magnetically isolated and exhibit a Curie type behaviour. (author) 5 figs., 14 refs

  10. Market Trials of Irradiated Spices

    International Nuclear Information System (INIS)

    Charoen, Saovapong; Eemsiri, Jaruratana; Sajjabut, Surasak

    2009-07-01

    Full text: The objectives of the experiment were to disseminate irradiated retail foods to the domestic publics and to test consumer acceptance on irradiated ground chilli and ground pepper. Market trials of irradiated ground chilli and ground pepper were carried out at 2 local markets and 4 in Bangkok and Nontaburi in 2005-2007. Before the start of the experiment, processing room, gamma irradiation room and labels of the products were approved by Food and Drug Administration, Thailand. 50 grams of irradiated products were packaged in plastic bags for the market trials. 688 and 738 bags of ground chilli and ground pepper were sold, respectively. Questionnaires distributed with the products were commented by 59 consumers and statistically analyzed by experimental data pass program. 88.1 and 91.4 percents of the consumers were satisfied with the quality and the price, respectively. 79.7% of the consumers chose to buy irradiated ground chilli and ground pepper because they believed that the quality of irradiated products were better than that of non-irradiated ones. 91.5% of the consumers would certainly buy irradiated chilli and pepper again. Through these market trials, it was found that all of the products were sold out and the majority of the consumers who returned the questionnaires was satisfied with the irradiated ground chilli and ground pepper and also had good attitude toward irradiated foods

  11. Irradiation of meat products, chicken and use of irradiated spices for sausages

    International Nuclear Information System (INIS)

    Kiss, I.F.; Beczner, J.; Zachariev, Gy.; Kovacs, S.

    1990-01-01

    The shelf-life of packed minced meat has been increased at least threefold at 4 0 C by applying a 2 kGy dose. Results have been confirmed by detailed quantitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated and irradiated samples. The optimal average dose was 4 kGy for packed-frozen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterobacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. in 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices. (author)

  12. Irradiation of meat products, chicken and use of irradiated spices for sausages

    Energy Technology Data Exchange (ETDEWEB)

    Kiss, I.F.; Beczner, J.; Zachariev, Gy. (Central Food Research Inst., Budapest (Hungary)); Kovacs, S. (Veterinary and Food Control Centre, Budapest (Hungary))

    1990-01-01

    The shelf-life of packed minced meat has been increased at least threefold at 4{sup 0}C by applying a 2 kGy dose. Results have been confirmed by detailed quantitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated and irradiated samples. The optimal average dose was 4 kGy for packed-frozen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterobacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. in 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices. (author).

  13. Irradiation of meat products, chicken and use of irradiated spices for sausages

    Science.gov (United States)

    Kiss, I. F.; Beczner, J.; Zachariev, Gy.; Kovács, S.

    The shelf-life of packed minced meat has been increased at least threefold at 4°C by applying a 2 kGy dose. Results have been confirmed by detailed quatitative microbiological examinations. Sensory evaluations show no significant difference between the unirradiated samples. The optimal average dose was 4 kGy for packed-frosen chicken. The number of mesophilic aerobic microbes was reduced by 2, that of psychrotolerant by 2-3 and that of Enterbacteriaceae by 3-4 orders of magnitude by 4 kGy. S. aureus and Salmonella could not be detected in the irradiated samples. In sensory evaluations there was no significant difference between untreated and irradiated samples. In 1984-1985 5100 kg irradiated chickens were marketed labelled as radiation treated. Irradiated spices (5 kGy) were used in the production of sausages (heat-treated and non-heat-treated) under industrial conditions. The microbiological contamination of irradiated spices was lower than that of ethylene oxide treated ones. The cell count in products made with irradiated spices was lower than in those made with unirradiated spices. The sausages proved to be of very good quality. In accordance with the permission, products were marketed and because of the low ratio of spices there was no need to declare them as using irradiated spices.

  14. Mutation induction in two crops by gamma rays

    African Journals Online (AJOL)

    PC-sonia

    2012-04-24

    Apr 24, 2012 ... dipsaci), rust (Uromyces fabae virus diseases and root rot (Rhizoctonia spp.) were also present (Hooper, 1983;. Kerkoud et al. 2007). Chocolate ..... utilized and neglected crops in low income food deficit countries through irradiation and related techniques, Pretoria, South Africa, pp. 127-130. Chaudhuri S ...

  15. Food irradiation 2009

    International Nuclear Information System (INIS)

    Narvaiz, Patricia

    2009-01-01

    Food irradiation principles; its main applications, advantages and limitations; wholesomeness, present activities at Ezeiza Atomic Centre; research coordinated by the International Atomic Energy Agency; capacity building; and some aspects on national and international regulations, standards and commercialization are briefly described. At present 56 countries authorize the consumption of varied irradiated foods; trade is performed in 32 countries, with about 200 irradiation facilities. Argentina pioneered nuclear energy knowledge and applications in Latin America, food irradiation included. A steady growth of food industrial volumes treated in two gamma facilities can be observed. Food industry and producers show interest towards new facilities construction. However, a 15 years standstill in incorporating new approvals in the Argentine Alimentary Code, in spite of consecutive request performed either by CNEA or some food industries restricts, a wider industrial implementation, which constitute a drawback to future regional commercialization in areas such as MERCOSUR, where Brazil since 2000 freely authorize food irradiation. Besides, important chances in international trade with developed countries will be missed, like the high fresh fruits and vegetables requirements United States has in counter-season, leading to convenient sale prices. The Argentine food irradiation facilities have been designed and built in the country. Argentina produces Cobalt-60. These capacities, unusual in the world and particularly in Latin America, should be protected and enhanced. Being the irradiation facilities scarce and concentrated nearby Buenos Aires city, the possibilities of commercial application and even research and development are strongly limited for most of the country regions. (author) [es

  16. Consumer acceptance of irradiated foods

    International Nuclear Information System (INIS)

    Feenstra, M.H.; Scholten, A.H.

    1991-01-01

    Although the first experiments on food irradiation were carried out in 1916 in Sweden, food irradiation, is for consumers, a relatively new technology. From the sixties food irradiation has been applied more and more, so that the consumer movement has become alert to this technology. Since then a lot of controversies have arisen in the literature about wholesomeness, safety, effects, etc. Food irradiation is currently permitted on a small scale in about 30 countries; in some countries or states food irradiation has been put under a ban (e.g. Australia, New Zealand, New Jersey). The World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) have, however, chosen food irradiation as a safe and sound method for preserving and improving the safety of food. Reactions on the part of the consumer organizations of many countries are however not in favour of or are even opposed to food irradiation. In this chapter consumer acceptance related to technological developments is described, then the convergence of the consumer movement on public opinion and concern on food irradiation is discussed. The need for labelling of irradiated food products is discussed and finally recommendations are given of ways to change consumers attitudes to food irradiation. (author)

  17. Food irradiation development in Japan

    International Nuclear Information System (INIS)

    Kawabata, T.

    1981-01-01

    In Japan, the first food irradiation research was carried out on the preservation of fish and fishery products. In 1966, the Atomic Energy Commission of the Japanese Government (JAEC) decided to promote the National Project on Food Irradiation and, in 1967, the Steering Committee on food irradiation research in the Atomic Energy Bureau, Science and Technology Agency, selected the following food items as of economic importance to the country, i.e., potatoes, onions, rice, wheat, ''Vienna'' sausage, ''kamaboko'' (fish meat jelly products) and mandarin oranges. The National Project is expected to finish at the end of the 1981 fiscal year. Based on the studies by the National Project, irradiated potatoes were given ''unconditional acceptance'' for human consumption in 1972. Already in 1973, a commercial potato irradiator was built at Shihoro, Hokkaido. In 1980, the Steering Committee submitted a final report on the effectiveness and wholesomeness studies on irradiated onions to the JAEC. This paper gives a brief explanation of the legal aspects of food irradiation in Japan, and the present status of wholesomeness studies on the seven items of irradiated foods. In addition, topics concerning food irradiation research on ''kamaboko'', especially on the effectiveness and a new detecting method for the irradiation treatment of these products, are outlined. (author)

  18. Mechanical Design and Manufacturing Preparation of Loading Unloading Irradiation Facility in Reflector Irradiation Position

    International Nuclear Information System (INIS)

    Hasibuan, Djaruddin

    2004-01-01

    Base on planning to increase of the irradiation service quality in Multi purpose Reactor-GAS, the mechanical design and manufacturing of the (n,γ) irradiation facility has been done. The designed of (n,γ) irradiation facility is a new facility in Multi purpose Reactor-GAS. The design doing by design of stringer, guide bar and hanger. By the design installation, the continuous irradiation service of non fission reaction will be easy to be done without reactor shut down. The design of the facility needs 3 pieces Al pipe by 36 x 1.5 mm, a peace of Al round bar by 80 mm diameter and a piece of Al plate by 20 x 60 x 0.2 mm for the stringer and guide bar manufacturing. By the building of non fission irradiation facility in the reflector irradiation position, will make the irradiation service to be increased. (author)

  19. Irradiation sequels of retinoblastomas. Sequelles de l'irradiation externe des retinoblastomes

    Energy Technology Data Exchange (ETDEWEB)

    Benk, V; Habrand, J L; Bloch Michel, E; Soussaline, M; Sarrazin, D [Centre de Lutte Contre le Cancer Gustave-Roussy, 94 - Villejuif (France)

    1993-01-01

    From 1975 to 1985, 34 children with a non-metastatic retinoblastoma were irradiated at the Institut Gustave-Roussy. After enucleation, 19 bilateral tumors were irradiated by two lateral opposed fields and 15 unilateral tumors by one lateral and anterior field, in the case of optic nerve being histologically positive. Dose was 45 Gy, 1.8 Gy per fraction. The 10-year-survival rate for unilateral and bilateral retinoblastomas was 79%. Long term sequels were available for 25 patients: 88% retained one functional eye. Three children with bilateral retinoblastomas developed a cataract in the residual eye between 2 and 5 years after irradiation, none with unilateral tumor. Nine patients (36%), seven with unilateral and two with bilateral tumor developed a cosmetical problem that required multiple surgical rehabilitation between 3 and 14 years after irradiation. Nine children (36%), five with unilateral and four with bilateral tumors developed growth hormone deficit between 2 and 8 years after irradiation that required hormone replacement. Their pituitary gland received 22 to 40 Gy. No osteosarcoma occurred in this population. Among long-term sequels, following irradiation for retinoblastoma, cosmetical deformities represent disabling sequels that could justify new approaches in radiotherapy, as protontherapy combined with 3-D-treatment planning.

  20. Craniospinal Irradiation for Trilateral Retinoblastoma Following Ocular Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Marks, Lawrence B.; Bentel, Gunilla; Sherouse, George W.; Spencer, David P.; Light, Kim

    2015-01-15

    A case study is presented. Craniospinal radiotherapy and a three-field pineal boost for trilateral retinoblastoma were delivered to a patient previously irradiated for ocular retinoblastoma. The availability of CT-based three-dimensional treatment planning provided the capability of identifying the previously irradiated volume as a three-dimensional anatomic structure and of designing a highly customized set of treatment beams that minimized reirradiation of that volume.

  1. Facts about food irradiation: Safety of irradiation facilities

    International Nuclear Information System (INIS)

    1991-01-01

    This fact sheet considers the safety of industrial irradiation facilities. Although there have been accidents, none of them has endangered public health or environmental safety, and the radiation processing industry is considered to have a very good safety record. Gamma irradiators do not produce radioactive waste, and the radiation sources at the facilities cannot explode nor in any other way release radioactivity into the environment. 3 refs

  2. Food irradiation

    International Nuclear Information System (INIS)

    Mercader, J.P.; Emily Leong

    1985-01-01

    The paper discusses the need for effective and efficient technologies in improving the food handling system. It defines the basic premises for the development of food handling. The application of food irradiation technology is briefly discussed. The paper points out key considerations for the adoption of food irradiation technology in the ASEAN region (author)

  3. Gamma-irradiation of tomatoes

    International Nuclear Information System (INIS)

    Tencheva, S.; Todorov, S.

    1975-01-01

    The influence of gamma-ray on tomatoes picked in a pink-red ripening stage, good for consumption, is studied. For that purpose tomatoes of ''Pioneer 2'' variety packed in perforated 500 g plastic bags were irradiated on a gamma device (Cobalt-60) at a dose power of 1900 rad/min with doses 200 or 300 krad. Samples were stored after irradiation at room temperature (20 - 22sup(o)C). Microbiological studies demonstrated that 44 resp. 99.96 per cent of the initial number of microorganisms was destroyed after irradiation with 200 resp. 300 krad. The time required for the number of microorganisms to be restored was accordingly increased. Irradiation delayed tomato ripening by 4 to 6 days, demonstrable by the reduced content of the basic staining substances - carotene and licopine. Immediately after irradiation the ascorbic acid content was reduced by an average of 13 per cent. After 18 days the amount of ascorbic acid in irradiated tomatoes was increased to a higher than the starting level, this is attributed to reductone formation during irradiation. The elevated total sugar content shown to be invert sugar was due to further tomato ripening. (Ch.K.)

  4. food irradiation: activities and potentialities

    International Nuclear Information System (INIS)

    Doellstaedt, R.; Huebner, G.

    1985-01-01

    After the acceptance of food irradiation up to an overall average dose of 10 kGy recommended by the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food in October 1980, the G.D.R. started a programme for the development of techniques for food irradiation. A special onion irradiator was designed and built as a pilot plant for studying technological and economic parameters of the irradiation of onions. (author)

  5. Blood irradiation: Rationale and technique

    International Nuclear Information System (INIS)

    Lewis, M.C.

    1990-01-01

    Upon request by the local American Red Cross, the Savannah Regional Center for Cancer Care irradiates whole blood or blood components to prevent post-transfusion graft-versus-host reaction in patients who have severely depressed immune systems. The rationale for blood irradiation, the total absorbed dose, the type of patients who require irradiated blood, and the regulations that apply to irradiated blood are presented. A method of irradiating blood using a linear accelerator is described

  6. Irradiated produce reaches Midwest market

    International Nuclear Information System (INIS)

    Pszczola, D.E.

    1992-01-01

    In March 1992, the Chicago-area store gave its shoppers a choice between purchasing irradiated and nonirradiated fruits. The irradiated fruits were treated at Vindicator Inc., the first U.S. food irradiation facility (starting up on January 10, 1992). The plant, located in Mulberry, Fla., then shipped the fruits in trucks to the store where they were displayed under a hand-lettered sign describing the irradiated fruits and showing the irradiation logo

  7. Ion irradiation to simulate neutron irradiation in model graphites: Consequences for nuclear graphite

    Science.gov (United States)

    Galy, N.; Toulhoat, N.; Moncoffre, N.; Pipon, Y.; Bérerd, N.; Ammar, M. R.; Simon, P.; Deldicque, D.; Sainsot, P.

    2017-10-01

    Due to its excellent moderator and reflector qualities, graphite was used in CO2-cooled nuclear reactors such as UNGG (Uranium Naturel-Graphite-Gaz). Neutron irradiation of graphite resulted in the production of 14C which is a key issue radionuclide for the management of the irradiated graphite waste. In order to elucidate the impact of neutron irradiation on 14C behavior, we carried out a systematic investigation of irradiation and its synergistic effects with temperature in Highly Oriented Pyrolitic Graphite (HOPG) model graphite used to simulate the coke grains of nuclear graphite. We used 13C implantation in order to simulate 14C displaced from its original structural site through recoil. The collision of the impinging neutrons with the graphite matrix carbon atoms induces mainly ballistic damage. However, a part of the recoil carbon atom energy is also transferred to the graphite lattice through electronic excitation. The effects of the different irradiation regimes in synergy with temperature were simulated using ion irradiation by varying Sn(nuclear)/Se(electronic) stopping power. Thus, the samples were irradiated with different ions of different energies. The structure modifications were followed by High Resolution Transmission Electron Microscopy (HRTEM) and Raman microspectrometry. The results show that temperature generally counteracts the disordering effects of irradiation but the achieved reordering level strongly depends on the initial structural state of the graphite matrix. Thus, extrapolating to reactor conditions, for an initially highly disordered structure, irradiation at reactor temperatures (200 - 500 °C) should induce almost no change of the initial structure. On the contrary, when the structure is initially less disordered, there should be a "zoning" of the reordering: In "cold" high flux irradiated zones where the ballistic damage is important, the structure should be poorly reordered; In "hot" low flux irradiated zones where the ballistic

  8. Dosimetry for Crystals Irradiation

    CERN Document Server

    Lecomte, Pierre

    2005-01-01

    Before shipment to CMS, all PbWO4 crystals produced in China are irradiated there with 60 Co , in order to insure that the induced absorption coefficient is within specifications. Acceptance tests at CERNand at ENEA also include irradiation with gamma rays from 60 Co sources. There were initially discrepancies in quoted doses and doserates as well as in induced absorption coefficients. The present work resolves the discrepancies in irradiation measurements and defines common dosimetry methods for consistency checks between irradiation facilities.

  9. Monte Carlo studies for irradiation process planning at the Portuguese gamma irradiation facility

    International Nuclear Information System (INIS)

    Oliveira, C.; Salgado, J.; Botelho, M.L.M. Luisa; Ferreira, L.M.

    2000-01-01

    The paper describes a Monte Carlo study for planning the irradiation of test samples for microbiological validation of distinct products in the Portuguese Gamma Irradiation Facility. Three different irradiation geometries have been used. Simulated and experimental results are compared and good agreement is observed. It is shown that Monte Carlo simulation improves process understanding, predicts absorbed dose distributions and calculates dose uniformity in different products. Based on these results, irradiation planning of the product can be performed

  10. Influence of irradiation conditions on the gamma irradiation effect in polyethylene

    International Nuclear Information System (INIS)

    Kacarevic-Popovic, Z.; Gal, O.; Novakovic, L.J.; Secerov, B.

    2002-01-01

    Complete text of publication follows. The radiation cross-linking of polyethylene, due to its high cross-linking yield, has resulted in the radiation technology that has found application in radiation production of heat shrinkable structures and in improvement of mechanical and thermo-physical properties of oriented polyethylene objects. It is observed that the cross-linking efficiency decreases when the irradiation is carried out in the presence of oxygen. In order to estimate the conditions that improve cross-linking efficiency, gamma irradiation effect in two types of polyethylene, irradiated in water and air was investigated. The polyethylene samples used were the low density (LDPE) Lotrene CdF 0302 with 45% crystallinity and the high density (HDPE) Hiplex EHM 6003 with 73% crystallinity. Both kinds of samples, fixed in the Pyrex glass tubes, were simultaneously irradiated with 60 Co gamma rays in distilled water and air, at a doses rate of 9,5 kGy/h (determined by the Fricke dosimeter) at room temperature. Radiation induced oxidative degradation was followed through oxygen containing group formation by the carbonyl group band (1720 cm -1 ) and transvinylene group formation by the band at 966 cm -1 in the infrared spectra. Cross-linking efficiency was determined by gel content using the procedure of the extraction in xylene. The monitored effects of gamma irradiation in water and air point to the conclusion that irradiation in water leads to the lower oxidative degradation and higher cross-linking compared with the effects measured after irradiation in air

  11. Neutron irradiation facility and its characteristics

    International Nuclear Information System (INIS)

    Oyama, Yukio; Noda, Kenji

    1995-01-01

    A neutron irradiation facility utilizing spallation reactions with high energy protons is conceived as one of the facilities in 'Proton Engineering center (PEC)' proposed at JAERI. Characteristics of neutron irradiation field of the facility for material irradiation studies are described in terms of material damage parameters, influence of the pulse irradiation, irradiation environments other than neutronics features, etc., comparing with the other sorts of neutron irradiation facilities. Some perspectives for materials irradiation studies using PEC are presented. (author)

  12. Structure and properties of UV-irradiated LLDPE and alloy of PA66 and the irradiated LLDPE

    International Nuclear Information System (INIS)

    Ran Qianping; Zou Hua; Wu Shishan; Shen Jian

    2006-01-01

    Some oxygen-containing groups such as C=O, C-O and -OH were introduced onto linear low-density polyethylene (LLDPE) chains by UV irradiation in air. Their concentration increased with the irradiation time. Crystal shape of the irradiated LLDPE remained an orthorhombic structure, while space of the crystalline plane kept unchanged. The melting temperature and crystallinity decreased due to the LLDPE chain scission into small molecules compound and crystalline defects caused by UV irradiation. Compared with pristine LLDPE, hydrophilicity of the irradiated LLDPE increased due to the introduction of polar oxygen-containing groups, but the tensile strength decreased due to the LLDPE chain degradation and reduction of crystallinity. The temperature of initial weight loss of the irradiated LLDPE was lower than that of pristine LLDPE. An alloy of PA66 and the irradiated LLDPE (irradiated PA66/LLDPE) was prepared by melting blend at 260-270 degree C. Compared to non-irradiated PA66/LLDPE alloy, dispersion of LLDPE particles in the irradiated PA66/LLDPE alloy and interfacial interactions between the components were markedly improved. Therefore, tensile strength and impact strength of the irradiated PA66/ LLDPE were higher than those of the control. (authors)

  13. Nuclear irradiation parameters of beryllium under fusion, fission and IFMIF irradiation conditions

    International Nuclear Information System (INIS)

    Fischer, U.; Chen, Y.; Leichtle, D.; Simakov, S.; Moeslang, A.; Vladimirov, P.

    2004-01-01

    A computational analysis is presented of the nuclear irradiation parameters for Beryllium under irradiation in typical neutron environments of fission and fusion reactors, and of the presently designed intense fusion neutron source IFMIF. The analysis shows that dpa and Tritium production rates at fusion relevant levels can be achieved with existing high flux fission reactors while the achievable Helium production is too low. The resulting He-Tritium and He/dpa ratios do not meet typical fusion irradiation conditions. Irradiation simulations in the medium flux test modules of the IFMIF neutron source facility were shown to be more suitable to match fusion typical irradiation conditions. To achieve sufficiently high production rates it is suggested to remove the creep-fatigue testing machine together with the W spectra shifter plate and move the tritium release module upstream towards the high flux test module. (author)

  14. Dose Distribution of Gamma Irradiators

    International Nuclear Information System (INIS)

    Park, Seung Woo; Shin, Sang Hun; Son, Ki Hong; Lee, Chang Yeol; Kim, Kum Bae; Jung, Hai Jo; Ji, Young Hoon

    2010-01-01

    Gamma irradiator using Cs-137 have been widely utilized to the irradiation of cell, blood, and animal, and the dose measurement and education. The Gamma cell 3000 Elan (Nordion International, Kanata, Ontario, Canada) irradiator was installed in 2003 with Cs-137 and dose rate of 3.2 Gy/min. And the BioBeam 8000 (Gamma-Service Medical GmbH, Leipzig, Germany) irradiator was installed in 2008 with Cs-137 and dose rate of 3.5 Gy/min. Our purpose was to evaluate the practical dosimetric problems associated with inhomogeneous dose distribution within the irradiated volume in open air state using glass dosimeter and Gafchromic EBT film dosimeter for routine Gamma irradiator dosimetry applications at the KIRAMS and the measurements were compared with each other. In addition, an user guideline for useful utilization of the device based on practical dosimetry will be prepared. The measurement results of uniformity of delivered dose within the device showed variation more than 14% between middle point and the lowest position at central axis. Therefore, to maintain dose variation within 10%, the criteria of useful dose distribution, for research radiation effects, the irradiated specimen located at central axis of the container should be placed within 30 mm from top and bottom surface, respectively. In addition, for measurements using the film, the variations of dose distribution were more then 50% for the case of less than 10 second irradiation, mostly within 20% for the case of more than 20 second irradiation, respectively. Therefore, the irradiation experiments using the BioBeam 8000 irradiator are recommended to be used for specimen required at least more than 20 second irradiation time.

  15. Detection methods for irradiated foods

    International Nuclear Information System (INIS)

    Dyakova, A.; Tsvetkova, E.; Nikolova, R.

    2005-01-01

    In connection with the ongoing world application of irradiation as a technology in Food industry for increasing food safety, it became a need for methods of identification of irradiation. It was required to control international trade of irradiated foods, because of the certain that legally imposed food laws are not violated; supervise correct labeling; avoid multiple irradiation. Physical, chemical and biological methods for detection of irradiated foods as well principle that are based, are introducing in this summary

  16. Studies of blood irradiator application

    International Nuclear Information System (INIS)

    Li Wenhong; Lu Yangqiao

    2004-01-01

    Transfusion is an important means for medical treatment, but it has many syndromes such as transfusion-associated graft-versus-host disease, it's occurrence rate of 5% and above 90% death-rate. Now many experts think the only proven method is using blood irradiator to prevent this disease. It can make lymphocyte of blood product inactive, so that it can not attack human body. Therefore, using irradiation blood is a trend, and blood irradiator may play an important role in medical field. This article summarized study of blood irradiator application, including the meaning of blood irradiation, selection of the dose for blood irradiation and so on

  17. Irradiation of packaged food

    International Nuclear Information System (INIS)

    Kilcast, D.

    1990-01-01

    Food irradiation is used to improve the safety of food by killing insects and microorganisms, to inhibit sprouting in crops such as onions and potatoes and to control ripening in agricultural produce. In order to prevent re-infestation and re-contamination it is essential that the food is suitably packed. Consequently, the packaging material is irradiated whilst in contact with the food, and it is important that the material is resistant to radiation-induced changes. In this paper the nature of the irradiation process is reviewed briefly, together with the known effects of irradiation on packaging materials and their implications for the effective application of food irradiation. Recent research carried out at the Leatherhead Food RA on the possibility of taint transfer into food is described. (author)

  18. Issues in food irradiation

    International Nuclear Information System (INIS)

    Mills, S.

    1987-04-01

    This discussion paper has two goals: first, to raise public awareness of food irradiation, an emerging technology in which Canada has the potential to build a new industry, mainly oriented to promising overseas markets; and second, to help build consensus among government and private sector decision makers about what has to be done to realize the domestic and export potential. The following pages discuss the potential of food irradiation; indicate how food is irradiated; outline the uses of food irradiation; examine questions of the safety of the equipment and both the safety and nutritional value of irradiated food; look at international commercial developments; assess the current and emerging domestic scene; and finally, draw some conclusions and offer suggestions for action

  19. The effect of γ-irradiation on changes of blood chemistry in RC-MAP after irradiation

    International Nuclear Information System (INIS)

    Hirose, Tetsuhito; Katayama, Norifumi; Okamoto, Yukiharu; Tsuda, Tadaaki; Ota, Kiichiro; Nishioka, Shingo; Tsumura, Michiyo; Yukawa, Mariko

    1997-01-01

    Irradiation to transfused blood is obligated to prevent from post transfusion graft-versus-host disease (PT-GVHD) by inactivation of lymphocytes. The rule of irradiated dose was not determined, it's dose being ranged from 15 to 50 Gy, but it's dose was done by each institute. We investigated an adequate dose of irradiation to blood on effects of plasma Na, potassium (K), Chloride (Cl), LDH, GOT, BUN and total protein (T.P) after irradiation of transfused blood. By comparison of plasma Na and K in non-irradiated blood, plasma K was increased and decreased in a parallelism of period of stored irradiated blood, two days after it's irradiation. Effects of Na and K levels were dose dependent. LDH level was increased in a time-dependency, but not by it's dose plasma Cl, LDH, GOT, BUN and T.P levels were not influenced. Our results indicated that the mechanism of RBC permeability after irradiation seemed to be inactivated Na-K ATPase activity in RBC cell membrane. (author)

  20. Gemstone dedicated gamma irradiation development

    Energy Technology Data Exchange (ETDEWEB)

    Omi, Nelson M.; Rela, Paulo R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mails: nminoru@ipen.br; prela@ipen.br

    2007-07-01

    The gemstones gamma irradiation process to enhance the color is widely accepted for the jewelry industry. These gems are processed in conventional industrial gamma irradiation plant which are optimized for other purposes, using underwater irradiation devices with high rejection rate due to its poor dose uniformity. A new conception design, which states the working principles and manufacturing ways of the device, was developed in this work. The suggested device's design is based on the rotation of cylindrical baskets and their translation in circular paths inside and outside a cylindrical source rack as a planetary system. The device is meant to perform the irradiation in the bottom of the source storage pool, where the sources remain always shielded by the water layer. The irradiator matches the Category III IAEA classification. To verify the physical viability of the basic principle, tests with rotating cylindrical baskets were performed in the Multipurpose Irradiator constructed in the CTR, IPEN. Also, simulations using the CADGAMMA software, adapted to simulate underwater irradiations, were performed. With the definitive optimized irradiator, the irradiation quality will be enhanced with better dose control and the production costs will be significantly lower than market prices due to the intended treatment device's optimization. This work presents some optimization parameters and the expected performance of the irradiator. (author)

  1. Vitamin A in irradiated foodstuffs

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1979-01-01

    Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and margarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0 0 C instead of at ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80 0 C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperture. (orig.) [de

  2. Vitamin A in irradiated foodstuffs

    International Nuclear Information System (INIS)

    Diehl, J.F.

    1979-01-01

    Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and magarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0 0 C instead of ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80 0 C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature. (orig.) [de

  3. Vitamin A in irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, J F [Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany, F.R.)

    1979-01-01

    Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and margarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0/sup 0/C instead of at ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80/sup 0/C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature.

  4. Vitamin A in irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Diehl, J F [Bundesforschungsanstalt fuer Ernaehrung, Karlsruhe (Germany, F.R.)

    1979-01-01

    Vitamin A losses induced by 10 MeV electrons in cream cheese, calf liver sausage, pig liver, whole egg powder and magarine continued to increase during storage for 4-8 weeks in presence of air. Thus, vitamin A loss in sausage irradiated with 5 Mrad was 22% on the day after irradiation, 61% after 4 weeks. Irradiation and storage at 0/sup 0/C instead of ambient temperature reduced these losses considerably. Exclusion of air (vacuum, nitrogen) or irradiation on dry ice (approx. -80/sup 0/C) were even more effective in preventing destruction of vitamin A. After 4 weeks of storage, cream cheese irradiated at 5 Mrad had lost 60% when irradiated and stored in air at ambient temperature, 20% in nitrogen atmosphere, 5% in vacuum package, and 5% when irradiated on dry ice and stored at ambient temperature.

  5. Detection of low amount of irradiated ingredients in non-irradiated precooked meals

    Science.gov (United States)

    Marchioni, Eric; Horvatovich, Peter; Ndiaye, Bara; Miesch, Michel; Hasselmann, Claude

    2002-03-01

    The application of the European Standards for the detection of irradiated food by thermoluminescence of silicates, electron-spin resonance spectroscopy of bones or gas chromatography-mass spectrometry of 2-alkylcyclobutanones does not allow the detection of irradiated ingredients included in small quantity in the matrix of a food which has not been irradiated, but which could be subjected to various processing technologies such as cooking, freezing or storage. The use of an enzymatic food hydrolysis carried out at moderated temperature, for the extraction of the food-contaminating silicate minerals and bone fragments, followed by a purification of the extracts by a high-density aqueous solution of sodium polytungstate, allows a simultaneous detection of weak inclusions (0.1% m:m) of irradiated spices and mechanically deboned turkey meat (MRM) included in various precooked foods. Moreover, the use of a supercritical fluid extraction procedure for the 2-alkylcyclobutanones or an additional purification step of the lipid extracts made it possible to lower the detection limit of the 2-alkylcyclobutanones radiation-induced from triglycerides. Using gas chromatography-mass spectrometry, down to 0.5% (m:m) of irradiated MRM included in non-irradiated chicken quenelles could be detected.

  6. Detection of low amount of irradiated ingredients in non-irradiated precooked meals

    International Nuclear Information System (INIS)

    Marchioni, Eric; Horvatovich, Peter; Ndiaye, Bara; Miesch, Michel; Hasselmann, Claude

    2002-01-01

    The application of the European Standards for the detection of irradiated food by thermoluminescence of silicates, electron-spin resonance spectroscopy of bones or gas chromatography-mass spectrometry of 2-alkylcyclobutanones does not allow the detection of irradiated ingredients included in small quantity in the matrix of a food which has not been irradiated, but which could be subjected to various processing technologies such as cooking, freezing or storage. The use of an enzymatic food hydrolysis carried out at moderated temperature, for the extraction of the food-contaminating silicate minerals and bone fragments, followed by a purification of the extracts by a high-density aqueous solution of sodium polytungstate, allows a simultaneous detection of weak inclusions (0.1% m:m) of irradiated spices and mechanically deboned turkey meat (MRM) included in various precooked foods. Moreover, the use of a supercritical fluid extraction procedure for the 2-alkylcyclobutanones or an additional purification step of the lipid extracts made it possible to lower the detection limit of the 2-alkylcyclobutanones radiation-induced from triglycerides. Using gas chromatography-mass spectrometry, down to 0.5% (m:m) of irradiated MRM included in non-irradiated chicken quenelles could be detected

  7. A study on UV irradiated HDPE

    International Nuclear Information System (INIS)

    Sang Haibo; Liu Zimin; Wu Shishan; Shen Jian

    2006-01-01

    The structure and properties of HDPE irradiated by ultraviolet (UV) in ozone atmosphere were studied by FT-IR, XPS, gel, and water contact angle test. The oxygen-containing groups such as C=O, C-O and C(=O)O were introduced onto high density polyethylene (HDPE) chains through ultraviolet irradiation in ozone atmosphere, their content increased with the UV irradiation time. Under the same UV irradiation conditions, amount of the oxygen-containing groups introduced in ozone atmosphere was more than that in air atmosphere, indicating that the speed of oxygen-containing groups introduced through UV irradiation in ozone atmosphere was faster than that in air. Therefore, HDPE could be quickly functionalized through UV irradiation in ozone atmosphere. There was no gel formed in the HDPE irradiated in ozone atmosphere. After UV irradiation, the water contact angle of HDPE decreased, and its hydrophilicity was improved, suggesting that the compatibility between the irradiated HDPE and polar polymer or inorganic fillers may be better. Compared with HDPE, the temperature of initial weight loss for irradiated HDPE decreased. The structure and properties of irradiated HDPE/CaCO 3 blend were also investigated. The results showed that the compatibility and interfacial action of the irradiated HDPE/CaCO 3 blend were improved compared to that of HDPE/CaCO 3 blend. The mechanical properties of irradiated HDPE/CaCO 3 blend increased with increasing irradiation time. (authors)

  8. Detection methods of irradiated foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Ponta, C C; Cutrubinis, M; Georgescu, R [IRASM Center, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Mihai, R [Life and Environmental Physics Department, Horia Hulubei National Institute for Physics and Nuclear Engineering, PO Box MG-6, RO-077125 Magurele-Bucharest (Romania); Secu, M [National Institute of Materials Physics, Bucharest (Romania)

    2005-07-01

    Full text: Food irradiation has, in certain circumstances, an important role to play both in promoting food safety and in reducing food losses. The safety and availability of nutritious food are essential components of primary health care. WHO actively encourages the proper use of food irradiation in the fight against foodborne diseases and food losses. To this end, it collaborates closely with FAO and IAEA. Food irradiation can have a number of beneficial effects, including delay of ripening and prevention of sprouting; control of insects, parasites, helminths, pathogenic and spoilage bacteria, moulds and yeasts; and sterilization, which enables commodities to be stored unrefrigerated for long periods. The 1990s witnessed a significant advancement in food irradiation processing. As a result, progress has been made in commercialization of the technology, culminating in greater international trade in irradiated foods and the implementation of differing regulations relating to its use in many countries. Codex General Standard for Irradiated Foodstuffs and Recommended International Code of Practice for the Operation of Irradiation Facilities Used for the Treatment of Foods regulate food irradiation at international level. At European Union level there are in power Directive 1999/2/EC and Directive1999/3/EC. Every particular country has also its own regulations regarding food irradiation. In Romania, since 2002 the Norms Regarding Foodstuffs and Food Ingredients Treated by Ionizing Radiation are in power. These Norms are in fact the Romanian equivalent law of the European Directives 1999/2/EC and 1999/3/EC. The greater international trade in irradiated foods has led to the demand by consumers that irradiated food should be clearly labeled as such and that methods capable of differentiating between irradiated and nonirradiated products should be available. Thus a practical basis was sought to allow consumers to exercise a free choice as to which food they purchase. If a

  9. Containers in food irradiation

    International Nuclear Information System (INIS)

    Bolumen, S.; Espinosa, R.

    1997-01-01

    The preservation of food by irradiation is promising technology which increases industrial application. Packaging of irradiated foods is an integral part of the process. Judicious selection of the package material for successful trade is essential. In this paper is presented a brief review of important aspects of packaging in food irradiation [es

  10. Nutritional aspects of irradiated shrimp

    International Nuclear Information System (INIS)

    Shamsuzzaman, K.

    1989-11-01

    Data available in the literature on the nutritional aspects of irradiated shrimp are reviewed and the indication is that irradiation of shrimp at doses up to about 3.2 kGy does not significantly affect the levels of its protein, fat, carbohydrate and ash. There are no reports on the effect of irradiation of shrimp above 3.2 kGy on these components. Limited information available indicates that there are some minor changes in the fatty acid composition of shrimp as a result of irradiation. Irradiation also causes some changes in the amino acid composition of shrimp; similar changes occur due to canning and hot-air drying. Some of the vitamins in shrimp, such as thiamine, are lost as a result of irradiation but the loss is less extensive than in thermally processed shrimp. Protein quality of shrimp, based on the growth of rats as well as that of Tetrahymena pyriformis, is not affected by irradiation. No adverse effects attributed to irradiation were found either in short-term or long-term animal feeding tests

  11. The present situation of irradiation services

    International Nuclear Information System (INIS)

    Hironiwa, Takayuki

    2014-01-01

    The present state of food irradiation in Japan is presented from a point of view of a trustee for irradiation business. Radiation sprout inhibition of potatoes, only approved by Government, and spice treatment, now being applied for, are explained. Existing establishments capable of entrusting irradiation services as business in Japan are outlined including Co-60 gamma ray and X-ray irradiation and electron beam irradiation. Principles of irradiation-induced physical and chemical effects in irradiated materials specifically organic polymers and brief explanation of facilities together with safety devices are also explained. (S. Ohno)

  12. Commercial food irradiation in practice

    International Nuclear Information System (INIS)

    Leemhorst, J.G.

    1990-01-01

    Dutch research showed great interest in the potential of food irradiation at an early stage. The positive research results and the potential applications for industry encouraged the Ministry of Agriculture and Fisheries to construct a Pilot Plant for Food Irradiation. In 1967 the Pilot Plant for Food Irradiation in Wageningen came into operation. The objectives of the plant were: research into applications of irradiation technology in the food industry and agricultural industry; testing irradiated products and test marketing; information transfer to the public. (author)

  13. Cost of transporting irradiated fuels and maintenance costs of a chemical treatment plant for irradiated fuels; Cout de transport des combustibles irradies et cout d'entretien d'une usine de traitement chimique des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Sousselier, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Numerous studies have been made of the cost of a fuel cycle, but many of them are based on a priori studies and are therefore to be treated with reserve. Thus, in the part dealing with the treatment of irradiated fuels, some important factors in the cost have only rarely been given on the basis of practical experience: the cost of transporting the fuels themselves and the plant maintenance costs. Investigations relating to transport costs are generally based on calculations made from somewhat arbitrary data. The studies carried out in France on the transport of irradiated uranium between the EDF reactors at Chinon and the retreatment plant at La Hague of the irradiated uranium from research reactors to foreign retreatment plants, are reported; they show that by a suitable choice of transport containers and details of expedition it has been possible to reduce the costs very considerably. This has been achieved either by combining rail and road transport or by increasing the writ capacities of the transport containers: an example is given of a container for swimming-pool pile elements which can transport a complete pile core at one time, thus substantially reducing the cost. Studies concerning the maintenance costs of retreatment plants are rarer still, although in direct maintenance plants these figures represent an appreciable fraction of the total treatment cost. An attempt has been made, on the basis of operational experience of a plant, to obtain some idea of these costs. Only maintenance proper has been considered, excluding subsidiary operations such as the final decontamination of apparatus, the burial of contaminated material and radioprotection operations Maintenance has been divided into three sections: mechanical maintenance, maintenance of electrical equipment and maintenance of control and adjustment apparatus. In each of these sections the distinction has been made between manpower and the material side. In order to allow comparisons to be made with

  14. Food irradiation: progress in Canada

    International Nuclear Information System (INIS)

    Wilson, B.K.

    1985-01-01

    The subject is discussed under the headings: food irradiation regulatory situation in Canada; non-regulatory developments (poultry irradiation; fish irradiation; Government willingness to fund industry initiated projects; Government willingness to establish food irradiation research and pilot plant facilities; food industry interest is increasing significantly; Canadian Consumers Association positive response; the emergence of new consulting and entrepreneurial firms). (U.K.)

  15. Food irradiation and the consumer

    International Nuclear Information System (INIS)

    Thomas, P.A.

    1990-01-01

    The poster presents a review of research work undertaken on the perception and understanding that consumers have of food irradiation. Food irradiation is not a revolutionary new food processing technique, in fact it is probably one of the most investigated methods presently available. Many countries such as Belgium, France, Denmark, Italy, Spain, the Netherlands and the United States of America permit food irradiation. In Britain it is presently banned although this is currently under review. Awareness of food irradiation by the general public in Britain, although not extensively researched would appear to be increasing, especially in the light of recent media coverage. New quantitative and qualitative work indicates that the general public are concerned about the safety and effectiveness of food irradiation. Research has shown that a large proportion of consumers in Britain, if given the opportunity to purchase irradiated food, would not do so. Further exploration into this response revealed the fact that consumers are confused over what food irradiation is. In addition, there is concern over the detection of irradiated food. The views presented in this paper, of the consumer reaction to irradiated food are of great importance to those involved in the food industry and industries allied to it, which are ultimately dependent on the consumer for their commercial survival. (author)

  16. Dosimetry of blood irradiator - 2000

    International Nuclear Information System (INIS)

    Mhatre, Sachin G.V.; Shinde, S.H.; Bhat, R.M.; Rao, Suresh; Sharma, D.N.

    2008-01-01

    Full text: Blood transfusion to an immunodeficient or immunosuppressed patient has a high risk involved due to occurrence of Transfusion Graft Versus Host Disease (T-GVHD). In order to eliminate this problem, blood is routinely exposed to ionizing radiation (gamma) prior to transfusion. Doses ranging from 15 Gy to 50 Gy can prevent T-GVHD. Aim of the present work was to perform dosimetry of 60 Co Blood Irradiator-2000 developed by Board of Radiation and isotope Technology (BRIT), India; using FBX dosimetric system. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which is a Reference Standard dosimeter. Experiments included measurement of dose-rate at the centre of irradiation volume, dose mapping in the central vertical plane within the irradiation volume and measurement of average dose received by blood sample using blood bags filled with FBX dosimeter by simulating actual irradiation conditions. During irradiation, the sample chamber is retracted into a cylindrical source cage, so that the sample is irradiated from all sides uniformly. Blood irradiator-2000 has sample rotation facility for increasing the dose uniformity during irradiation. The performance of this was investigated by measuring the central vertical plane dose profile in stationary state as well in rotation using the sample rotation facility (60 rpm). FBX being an aqueous dosimetric system fills container of irregular shape being irradiated hence can be used to integrate the dose over the volume. Dose-rate measured by FBX dosimeter was intercompared with Fricke dosimeter, which was in good agreement. Average dose-rate at the centre of irradiation volume and within the blood bag was measured by FBX and Fricke dosimeters. It was observed that dose profiles measured by FBX and Fricke dosimeters agreed within ± 2%. Dose uniformity within the irradiation volume was found to reduce from 21% to 17% when the sample rotation facility was used. Thus, it is suggested by the

  17. The response of previously irradiated mouse skin to heat alone or combined with irradiation: influence of thermotolerance

    International Nuclear Information System (INIS)

    Wondergem, J.; Haveman, J.

    1983-01-01

    The effect of previous x-irradiation on the response to hyperthermia (44 0 C), x-irradiation, and irradiation combined with hyperthermia (43 0 C or 44 0 C) was studied in mouse foot skin. Irradiation of mice feet 90 days before, with 20 Gy, increased the subsequent response to heat alone, or combined with irradiation, as well as to irradiation alone. It had little effect on the thermal enhancement ratios for both acute and late skin reactions. Memory of the previous irradiation treatment could be masked when the temperature of the subsequent heat treatment alone, or combined with irradiation, was 44 0 C. Priming heat treatment induced resistance to a subsequent heat treatment and to a subsequent combined irradiation-heat treatment in normal as well as previously irradiated skin. When late skin reaction was considered, a larger 'memory' of the previous irradiation treatment was always evident, compared to acute skin reaction: the 'remembered' dose in the late skin reaction was about twice the 'remembered' dose in the acute reaction. (U.K.)

  18. IAEA and food irradiation

    International Nuclear Information System (INIS)

    Machi, Sueo

    1995-01-01

    IAEA was founded in 1957. 122 countries take part in it. It is operated with the yearly ordinary budget of about 20 billion yen and the technical cooperation budget of about 6 billion yen and by 2200 personnel. Its two important roles are the promotion of the peaceful utilization of atomic energy and the prevention of nuclear proliferation. The activities of IAEA are shown. The cooperation with developing countries and the international research cooperation program are the important activities. The securing of foods is an urgent subject, and the utilization of radiation and isotopes has been promoted, aiming at sustaining agriculture. The necessity of food irradiation is explained, and at present, commercial food irradiation is carried out in 28 countries including Japan. The irradiation less than 10 kGy does not cause poisonous effect in any food, according to JECFI. The new international agreement is expected to be useful for promoting the international trade of irradiated foods. The international cooperation for the spread of food irradiation and the public acceptance of food irradiation are reported. (K.I.)

  19. Food irradiation in Japan

    International Nuclear Information System (INIS)

    Ito, Hitoshi

    1995-01-01

    The basic research on food irradiation in Japan was begun around 1955 by universities and national laboratories. In 1967, food irradiation was designated to the specific general research on atomic energy, and the national project on large scale was continued until 1983. As the result, the treatment of germination prevention for potatoes was approved by the Ministry of Health and Welfare in 1972. The Co-60 gamma ray irradiation facility of Shihoro Agricultural Cooperative is famous as the facility that succeeded in the practical use of food irradiation for the first time in the world. But the practical use of food irradiation stagnates and the research activities were reduced in Japan due to the circumstances thereafter. The effect of radiation to foods and living things is explained. The features of the radiation treatment of foods are small temperature rise, large transmissivity, no residue, the small loss of nutrition and large quantity, continuous treatment. The safety of irradiated foods is explained. The subjects for hereafter are discussed. (K.I.)

  20. The wholesomeness of irradiated food

    International Nuclear Information System (INIS)

    Elias, P.S.; Matsuyama, A.

    1978-01-01

    It is apparent that there is a need for protection of the consumer and a need for governmental authorities to insure a safe and wholesome food supply for the population. Based on objective and scientific evidence regarding the safety of food irradiation, national and international health authorities are able to determine whether irradiated food is acceptable for human consumption. Following a thorough review of all available data, the Joint FAO/IAEA/WHO Expert Committee unconditionally approved wheat and ground wheat products and papaya irradiated for disingestation at a maximum dose of 100 krad, potatoes irradiated for sprout control at a maximum dose not exceeding 15 krad, and chicken irradiated at a maximum dose of 700 krad to reduce microbiological spoilage. Lastly, it unconditionally approved strawberries irradiated at a maximum dose of 300 krad to prolong storage. Onions at irradiated for sprout control at a maximum dose of 15 krad were temporarily approved, subject to preparation of further data on multigeneration reproduction studies on rats. Codfish and redfish eviscerated after irradiation at a maximum dose of 220 krad to reduce microbiological spoilage were also approved, based on the results of various studies in progress. Temporary, conditional approval of rice irradiated for insect disinfestation at a maximum dose of 100 krad was based on results of long-term studies on rats and monkies, available in the next review. Due to insufficient data, no decision regarding irradiated mushrooms was made. (Bell, E.)

  1. Materials irradiation research in neutron science

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji; Oyama, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-11-01

    Materials irradiation researches are planned in Neutron Science Research Program. A materials irradiation facility has been conceived as one of facilities in the concept of Neutron Science Research Center at JAERI. The neutron irradiation field of the facility is characterized by high flux of spallation neutrons with very wide energy range up to several hundred MeV, good accessibility to the irradiation field, good controllability of irradiation conditions, etc. Extensive use of such a materials irradiation facility is expected for fundamental materials irradiation researches and R and D of nuclear energy systems such as accelerator-driven incineration plant for long-lifetime nuclear waste. In this paper, outline concept of the materials irradiation facility, characteristics of the irradiation field, preliminary technical evaluation of target to generate spallation neutrons, and materials researches expected for Neutron Science Research program are described. (author)

  2. Kraft cooking of gamma irradiated wood, (1). Effect of alcohol additives on pre-irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Inaba, M; Meshitsuka, G; Nakano, J [Tokyo Univ. (Japan). Faculty of Agriculture

    1979-12-01

    Studies have been made of kraft cooking of gamma irradiated wood. Beech (Fagus crenata Blume) wood meal suspended in aqueous alkaline alcohol was irradiated up to 1.5 KGy (0.15 Mrad) with gamma rays from a Co-60 source in the presence or absence of oxygen. The irradiated wood meals were washed thoroughly with fresh water, air dried and cooked under the ordinary cooking conditions. The results are summarized as follows: (1) Pre-irradiation in aqueous alkali have negligible effect on kraft cooking. (2) In the case of ethanol addition (50 g/l), pre-irradiation in vacuo shows acceleration of delignification and stabilization of carbohydrates during kraft cooking. Cooked yield gain by pre-irradiation was about 1.2 in all, over the range of delignification from 80 to 90%. Aqueous ethanol without alkali also shows positive but smaller effect than that with alkali. (3) Propanol, iso-propanol and butanol show positive but smaller effects than ethanol. However, methanol does not show any positive effect. (4) Irradiation in the presence of oxygen does not show any attractive effect on kraft cooking.

  3. Consumer acceptance of irradiated poultry

    International Nuclear Information System (INIS)

    Hashim, I.B.; Resurreccion, A.V.A.; McWatters, K.H.

    1995-01-01

    A simulated supermarket setting (SSS) test was conducted to determine whether consumers (n = 126) would purchase irradiated poultry products, and the effects of marketing strategies on consumer purchase of irradiated poultry products. Consumer preference for irradiated poultry was likewise determined using a home-use test. A slide program was the most effective educational strategy in changing consumers' purchase behavior. The number of participants who purchased irradiated boneless, skinless breasts and irradiated thighs after the educational program increased significantly from 59.5 and 61.9% to 83.3 and 85.7% for the breasts and thighs, respectively. Using a label or poster did not increase the number of participants who bought irradiated poultry products. About 84% of the participants consider it either 'somewhat necessary' or 'very necessary' to irradiate raw chicken and would like all chicken that was served in restaurants or fast food places to be irradiated. Fifty-eight percent of the participants would always buy irradiated chicken if available, and an additional 27% would buy it sometimes. About 44% of the participants were willing to pay the same price for irradiated chicken as for nonirradiated. About 42% of participants were willing to pay 5% or more than what they were currently paying for nonirradiated chicken. Seventy-three percent or more of consumers who participated in the home-use test (n = 74) gave the color, appearance, and aroma of the raw poultry products a minimum rating of 7 (= like moderately). After consumers participated in a home-use test, 84 and 88% selected irradiated thighs and breasts, respectively, over nonirradiated in a second SSS test

  4. Consumer acceptance of irradiated poultry.

    Science.gov (United States)

    Hashim, I B; Resurreccion, A V; McWatters, K H

    1995-08-01

    A simulated supermarket setting (SSS) test was conducted to determine whether consumers (n = 126) would purchase irradiated poultry products, and the effects of marketing strategies on consumer purchase of irradiated poultry products. Consumer preference for irradiated poultry was likewise determined using a home-use test. A slide program was the most effective educational strategy in changing consumers' purchase behavior. The number of participants who purchased irradiated boneless, skinless breasts and irradiated thighs after the educational program increased significantly from 59.5 and 61.9% to 83.3 and 85.7% for the breasts and thighs, respectively. Using a label or poster did not increase the number of participants who bought irradiated poultry products. About 84% of the participants consider it either "somewhat necessary" or "very necessary" to irradiate raw chicken and would like all chicken that was served in restaurants or fast food places to be irradiated. Fifty-eight percent of the participants would always buy irradiated chicken if available, and an additional 27% would buy it sometimes. About 44% of the participants were willing to pay the same price for irradiated chicken as for nonirradiated. About 42% of participants were willing to pay 5% or more than what they were currently paying for nonirradiated chicken. Seventy-three percent or more of consumers who participated in the home-use test (n = 74) gave the color, appearance, and aroma of the raw poultry products a minimum rating of 7 (= like moderately). After consumers participated in a home-use test, 84 and 88% selected irradiated thighs and breasts, respectively, over nonirradiated in a second SSS test.

  5. Total lymphoid irradiation

    International Nuclear Information System (INIS)

    Sutherland, D.E.; Ferguson, R.M.; Simmons, R.L.; Kim, T.H.; Slavin, S.; Najarian, J.S.

    1983-01-01

    Total lymphoid irradiation by itself can produce sufficient immunosuppression to prolong the survival of a variety of organ allografts in experimental animals. The degree of prolongation is dose-dependent and is limited by the toxicity that occurs with higher doses. Total lymphoid irradiation is more effective before transplantation than after, but when used after transplantation can be combined with pharmacologic immunosuppression to achieve a positive effect. In some animal models, total lymphoid irradiation induces an environment in which fully allogeneic bone marrow will engraft and induce permanent chimerism in the recipients who are then tolerant to organ allografts from the donor strain. If total lymphoid irradiation is ever to have clinical applicability on a large scale, it would seem that it would have to be under circumstances in which tolerance can be induced. However, in some animal models graft-versus-host disease occurs following bone marrow transplantation, and methods to obviate its occurrence probably will be needed if this approach is to be applied clinically. In recent years, patient and graft survival rates in renal allograft recipients treated with conventional immunosuppression have improved considerably, and thus the impetus to utilize total lymphoid irradiation for its immunosuppressive effect alone is less compelling. The future of total lymphoid irradiation probably lies in devising protocols in which maintenance immunosuppression can be eliminated, or nearly eliminated, altogether. Such protocols are effective in rodents. Whether they can be applied to clinical transplantation remains to be seen

  6. Post-irradiation diarrhea

    International Nuclear Information System (INIS)

    Meerwaldt, J.H.

    1984-01-01

    In radiotherapy of pelvic cancers, the X-ray dose to be delivered to the tumour is limited by the tolerance of healthy surrounding tissue. In recent years, a number of serious complications of irradiation of pelvic organs were encountered. Modern radiotherapy necessitates the acceptance of a calculated risk of complications in order to achieve a better cure rate. To calculate these risks, one has to know the radiation dose-effect relationship of normal tissues. Of the normal tissues most at risk when treating pelvic tumours only the bowel is studied. In the literature regarding post-irradiation bowel complications, severe and mild complications are often mixed. In the present investigation the author concentrated on the group of patients with relatively mild symptoms. He studied the incidence and course of post-irradiation diarrhea in 196 patients treated for carcinoma of the uterine cervix or endometrium. The aims of the present study were: 1) to determine the incidence, course and prognostic significance of post-irradiation diarrhea; 2) to assess the influence of radiotherapy factors; 3) to study the relation of bile acid metabolism to post-irradiation diarrhea; 4) to investigate whether local factors (reservoir function) were primarily responsible. (Auth.)

  7. 1356-IJBCS-Article-Alphonse Sezan

    African Journals Online (AJOL)

    hp

    Le recueil des mesures anthropométriques des étudiants de l'Institut National Médico-Social. (INMES) au Bénin nous a permis de calculer l'Indice de Masse Corporelle de cette population, seul indicateur pour évaluer l'état nutritionnel des adultes de point de vue énergétique. Au terme de cette évaluation, il ressort.

  8. Microstructure and mechanical properties of neutron irradiated OFHC-copper before and after post-irradiation annealing

    International Nuclear Information System (INIS)

    Singh, B.N.; Edwards, D.J.; Toft, P.

    2001-02-01

    Tensile specimens of OFHC-copper were irradiated with fission neutrons in the DR-3 reactor at Risoe National Laboratory at 100 deg. C to different displacement dose levels in the range of 0.01 to 0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas other were given a post-irradiation annealing at 300 deg. C for 50 h and subsequently tested at 100 deg. C. Transmission electron microscopy was used to characterize the microstructure of specimens in the as-irradiation as well as irradiation and annealed conditions both before and after tensile deformation. The results show that while the interstitial loop microstructure coarsens with irradiation dose, no significant changes are observed in the population of stacking fault tetrahedra. The results also illustrates that the post-irradiation annealing leads to only a partial recovery and that the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the problem of yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade induced source hardening (CISH) and the dispersed barrier hardening (DBH) models. Both technological and scientific implications of these results are considered. (au)

  9. New multipurpose gamma-irradiation facility

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, G

    1985-01-01

    In the past 3 years much work has been done in the G.D.R. on food irradiation. The experiments have shown that this treatment gives favourable results in many products such as spices, onions, potatoes, chicken, animal feeds, fodder yeast, drugs and vaccines. Economic aspects of food irradiation require the effective use of an irradiation plant and cobalt-60. Therefore, a new multipurpose irradiation facility was developed, applicable as an onion irradiator with a capacity of about 15 ton/h and for the simultaneous irradiation of different products (spices, animal feed, chicken, etc.) in closed product boxes with a size of 1.2 m x 1.0 m x 1.2 m. A microcomputer controls the transport of product boxes around the gamma sources.

  10. Status of irradiation capsule design

    International Nuclear Information System (INIS)

    Nagata, Hiroshi; Yamaura, Takayuki; Nagao, Yoshiharu

    2013-01-01

    For the irradiation test after the restart of JMTR, further precise temperature control and temperature prediction are required. In the design of irradiation capsule, particularly sophisticated irradiation temperature prediction and evaluation are urged. Under such circumstance, among the conventional design techniques of irradiation capsule, the authors reviewed the evaluation method of irradiation temperature. In addition, for the improvement of use convenience, this study examined and improved FINAS/STAR code in order to adopt the new calculation code that enables a variety of analyses. In addition, the study on the common use of the components for radiation capsule enabled the shortening of design period. After the restart, the authors will apply this improved calculation code to the design of irradiation capsule. (A.O.)

  11. Fish irradiation

    International Nuclear Information System (INIS)

    Kovacs, J.; Tengumnuay, C.; Juangbhanich, C.

    1970-01-01

    Chub-mackerel was chosen for the study because they are the most common fish in Thailand. Preliminary investigations were conducted to determine the maximum radiation dose of gamma-rays by organoleptic tests. The samples were subjected to radiation at various doses up to 4 Mrad. Many experiments were conducted using other kinds of fish. The results showed that 1 Mrad would be the maximum acceptable dose for fish. Later, the influence of the radiation dose from 0.1-1 Mrad was studied in order to find the optimum acceptable dose for preservation of fish without off-flavour. For this purpose, the Hedonic scale was used. It was found that 0.2 and 0.5 Mrad gave the best result on Chub mackerel. The determinations of optimum dose, organoleptic, microbiological and trimethylamine content changes were done. The results showed that Chub mackerel irradiated at 0.2, 0.5 and 1 Mrad stored at 3 0 C for 71 days were still acceptable, on the contrary the untreated samples were found unacceptable at 14 days. The trimethylamine increment was significantly higher in the untreated samples. At 15 days storage, trimethylamine in the non-irradiated Chub-mackerel was about 10 times higher than the irradiated ones. At 51 and 79 days storage, about 13 times higher in the control samples than the irradiated samples except 0.1 Mrad. Only 2 times higher was found for the 0.1 Mrad. The microbiological results showed that the irradiation above 0.2 Mrad gave favorable extension of shelf-life of fish

  12. Immunocytoadherence and sublethal irradiation

    International Nuclear Information System (INIS)

    Beaumariage, M.L.; Hiesche, K.; Revesz, L.; Haot, J.

    1975-01-01

    In sublethally irradiated CBA mice, the relative and absolute numbers of spontaneous rosette forming cells against sheep erythrocytes are markedly decreased in bone marrow. The decrease of the absolute number of spontaneous RFC is also important in the spleen in spite of an increase of the RFC relative number above the normal values between the 8th and 12th day after irradiation. The graft of normal bone marrow cells immediately after irradiation or the shielding of a medullary area during irradiation promotes the recovery of the immunocytoadherence capacity of the bone marrow cells but not of the spleen cells [fr

  13. e-Learning Course on Food Irradiation

    International Nuclear Information System (INIS)

    Hénon, Yves

    2016-01-01

    Since May 2015, an online, interactive, multi-media and self-study course on Food Irradiation - Technology, Applications and Good Practices has been made available by the Food and Environmental Protection Section. This e-learning Course on Food Irradiation was initiated during a project (RAS/05/057) of the Regional Cooperative Agreement (RCA) Implementing Best Practices of Food Irradiation for Sanitary and Phytosanitary Purposes. Each module contains: • A lesson, largely based on the Manual of Good Practice in Food except for the first part (Food Irradiation) for which expanding the contents and addressing frequently asked questions seemed necessary. The latest chapters will help operators of irradiation facilities to appreciate and improve their practices. • A section called ‘Essentials’ that summarizes the key points. • A quiz to assess the knowledge acquired by the user from the course material. The quiz questions take a variety of forms: answer matching, multiple choice, true or false, picture selection, or simple calculation. Videos, Power Point presentations, pdf files and pictures enrich the contents. The course includes a glossary and approximately 80 downloadable references. These references cover safety of irradiated food, effects of irradiation on the nutritional quality of food, effects of irradiation on food microorganisms, insects and parasites, effects of irradiation on parasites, sanitary and phytosanitary applications of irradiation, packaging of irradiated food, food irradiation standards and regulations, history of food irradiation, and communication aspects.

  14. Fruit irradiation

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Food spoilage is a common problem when marketing agricultural products. Promising results have already been obtained on a number of food irradiating applications. A process is described in this paper where irradiation of sub-tropical fruits, especially mangoes and papayas, combined with conventional heat treatment results in effective insect and fungal control, delays ripening and greatly improves the quality of fruit at both export and internal markets

  15. Comparative study on disinfection potency of spore forming bacteria by electron-beam irradiation and gamma-ray irradiation

    International Nuclear Information System (INIS)

    Takizawa, Hironobu; Suzuki, Satoru; Suzuki, Tetsuya; Takama, Kozo; Hayashi, Toru; Yasumoto, Kyoden.

    1990-01-01

    Along with gamma-ray irradiation, electron-beam irradiation (EB) is a method to disinfect microorganisms which cause food decomposition and food-poisoning. The present study was undertaken to compare sterilization efficacy of EB and gamma-ray irradiation on bacterial spores and vegetative cells under various conditions. Spores of Bacillus pumilus, a marker strain for irradiation study, and Bacillus stearothermophilus known as a thermophilic bacteria were irradiated by electron-beam and gamma-ray separately at irradiation dose of 0 to 10 kGy on combination of wet/dry and aerobic/anaerobic conditions. Sterilization effect of irradiation on spores was evaluated by colony counting on agar plates. Results showed that both EB and gamma-ray irradiation gave sufficient sterilization effect on spores, and the sterilization effect increased exponentially with irradiation dose. The sterilization effect of gamma-ray irradiation was higher than that of EB in all cases. Higher disinfection effect was observed under aerobic condition. The present study suggests that oxygen supply in EB is more important than gamma-ray irradiation. No results suggesting that chlorine ion at 0.1 ppm (as available chlorine concentration) enhanced the sterilization efficacy of either EB or gamma-ray irradiation was obtained under any conditions examined. (author)

  16. Comparative study on disinfection potency of spore forming bacteria by electron-beam irradiation and gamma-ray irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Takizawa, Hironobu; Suzuki, Satoru; Suzuki, Tetsuya; Takama, Kozo [Hokkaido Univ., Hakodate (Japan). Faculty of Fisheries; Hayashi, Toru; Yasumoto, Kyoden

    1990-10-01

    Along with gamma-ray irradiation, electron-beam irradiation (EB) is a method to disinfect microorganisms which cause food decomposition and food-poisoning. The present study was undertaken to compare sterilization efficacy of EB and gamma-ray irradiation on bacterial spores and vegetative cells under various conditions. Spores of Bacillus pumilus, a marker strain for irradiation study, and Bacillus stearothermophilus known as a thermophilic bacteria were irradiated by electron-beam and gamma-ray separately at irradiation dose of 0 to 10 kGy on combination of wet/dry and aerobic/anaerobic conditions. Sterilization effect of irradiation on spores was evaluated by colony counting on agar plates. Results showed that both EB and gamma-ray irradiation gave sufficient sterilization effect on spores, and the sterilization effect increased exponentially with irradiation dose. The sterilization effect of gamma-ray irradiation was higher than that of EB in all cases. Higher disinfection effect was observed under aerobic condition. The present study suggests that oxygen supply in EB is more important than gamma-ray irradiation. No results suggesting that chlorine ion at 0.1 ppm (as available chlorine concentration) enhanced the sterilization efficacy of either EB or gamma-ray irradiation was obtained under any conditions examined. (author).

  17. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    International Nuclear Information System (INIS)

    Singh, B.N.; Edwards, D.J.; Toft, P.

    2001-01-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risoe at 100 deg. C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas others were given a post-irradiation annealing treatment at 300 deg. C for 50 h and subsequently tested at 100 deg. C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model

  18. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    Energy Technology Data Exchange (ETDEWEB)

    Singh, B.N. E-mail: bachu.singh@risoe.dk; Edwards, D.J.; Toft, P

    2001-12-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risoe at 100 deg. C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 deg. C whereas others were given a post-irradiation annealing treatment at 300 deg. C for 50 h and subsequently tested at 100 deg. C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model.

  19. Effect of neutron irradiation and post-irradiation annealing on microstructure and mechanical properties of OFHC-copper

    Science.gov (United States)

    Singh, B. N.; Edwards, D. J.; Toft, P.

    2001-12-01

    Specimens of oxygen-free high conductivity (OFHC) copper were irradiated in the DR-3 reactor at Risø at 100 °C to doses in the range 0.01-0.3 dpa (NRT). Some of the specimens were tensile tested in the as-irradiated condition at 100 °C whereas others were given a post-irradiation annealing treatment at 300 °C for 50 h and subsequently tested at 100 °C. The microstructure of specimens was characterized in the as-irradiated as well as irradiated and annealed conditions both before and after tensile deformation. While the interstitial loop microstructure coarsens with irradiation dose, no significant changes were observed in the population of stacking fault tetrahedra (SFT). The post-irradiation annealing leads to only a partial recovery and the level of recovery depends on the irradiation dose level. However, the post-irradiation annealing eliminates the yield drop and reinstates enough uniform elongation to render the material useful again. These results are discussed in terms of the cascade-induced source hardening (CISH) model.

  20. Food package irradiator-a landmark of operational safety and food irradiation research

    International Nuclear Information System (INIS)

    Jain, M.P.; Sanyal, Bhaskar; Ghosh, Sunil K.

    2017-01-01

    Food irradiation in India has been undertaken for preservation of food for safe consumption, security of food for round the year and export of the food commodities to earn foreign exchange. Therefore, an irradiation plant known as Food Package Irradiator (FPI) was set-up in the year 1967 in BARC. This plant utilizes gamma radiation from "6"0Co source that has a maximum allowable activity of 100 kCi. It is a multipurpose facility where a wide range of products like onion for sprout inhibition to spices for microbial decontamination can be carried out. In short, the design of irradiator has been considered based on obtaining variable throughputs and variable dose rates