Applied data analysis and modeling for energy engineers and scientists

CERN Document Server

Reddy, T Agami

2011-01-01

""Applied Data Analysis and Modeling for Energy Engineers and Scientists"" discusses mathematical models, data analysis, and decision analysis in modeling. The approach taken in this volume focuses on the modeling and analysis of thermal systems in an engineering environment, while also covering a number of other critical areas. Other material covered includes the tools that researchers and engineering professionals will need in order to explore different analysis methods, use critical assessment skills and reach sound engineering conclusions. The book also covers process and system design and

Applied decision analysis and risk evaluation

International Nuclear Information System (INIS)

Ferse, W.; Kruber, S.

1995-01-01

During 1994 the workgroup 'Applied Decision Analysis and Risk Evaluation; continued the work on the knowledge based decision support system XUMA-GEFA for the evaluation of the hazard potential of contaminated sites. Additionally a new research direction was started which aims at the support of a later stage of the treatment of contaminated sites: The clean-up decision. For the support of decisions arising at this stage, the methods of decision analysis will be used. Computational aids for evaluation and decision support were implemented and a case study at a waste disposal site in Saxony which turns out to be a danger for the surrounding groundwater ressource was initiated. (orig.)

Applied research and development of neutron activation analysis

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Baek, Sung Ryel; Kim, Young Gi; Jung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun; Lim, Jong Myoung

2003-05-01

The aims of this project are to establish the quality control system of Neutron Activation Analysis(NAA) due to increase of industrial needs for standard analytical method and to prepare and identify the standard operation procedure of NAA through practical testing for different analytical items. R and D implementations of analytical quality system using neutron irradiation facility and gamma-ray measurement system and automation of NAA facility in HANARO research reactor are as following ; 1) Establishment of NAA quality control system for the maintenance of best measurement capability and the promotion of utilization of HANARO research reactor 2) Improvement of analytical sensitivity for industrial applied technologies and establishment of certified standard procedures 3) Standardization and development of Prompt Gamma-ray Activation Analysis (PGAA) technology

COMPARATIVE STUDY OF THREE LINEAR SYSTEM SOLVER APPLIED TO FAST DECOUPLED LOAD FLOW METHOD FOR CONTINGENCY ANALYSIS

Directory of Open Access Journals (Sweden)

Syafii

2017-03-01

Full Text Available This paper presents the assessment of fast decoupled load flow computation using three linear system solver scheme. The full matrix version of the fast decoupled load flow based on XB methods used in this study. The numerical investigations are carried out on the small and large test systems. The execution time of small system such as IEEE 14, 30, and 57 are very fast, therefore the computation time can not be compared for these cases. Another cases IEEE 118, 300 and TNB 664 produced significant execution speedup. The superLU factorization sparse matrix solver has best performance and speedup of load flow solution as well as in contigency analysis. The invers full matrix solver can solved only for IEEE 118 bus test system in 3.715 second and for another cases take too long time. However for superLU factorization linear solver can solved all of test system in 7.832 second for a largest of test system. Therefore the superLU factorization linear solver can be a viable alternative applied in contingency analysis.

Applied Control Systems Design

CERN Document Server

Mahmoud, Magdi S

2012-01-01

Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

Regional LLRW processing alternatives applying the DOE REGINALT systems analysis model

International Nuclear Information System (INIS)

Beers, G.H.

1987-01-01

The DOE Low-Level Waste Management Program has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternatives. Using waste from a typical regional compact, two specific regional waste processing centers are compared for feasibility. Example 1 assumes that a regional supercompaction facility is being developed for the region. Example 2 assumes that a regional facility with both supercompaction and incineration is specified. Both examples include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples are compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cycle costs per generated unit waste. A base case also illustrates current disposal practices. The results of the comparisons evaluated, and other steps, if necessary, for additional decision support are identified

Applied Behavior Analysis

Science.gov (United States)

Szapacs, Cindy

2006-01-01

Teaching strategies that work for typically developing children often do not work for those diagnosed with an autism spectrum disorder. However, teaching strategies that work for children with autism do work for typically developing children. In this article, the author explains how the principles and concepts of Applied Behavior Analysis can be…

Environment-oriented life cycle analysis of bulk materials, applied in solar cell systems

International Nuclear Information System (INIS)

Geelen, H.

1994-04-01

In the solar cell technology several bulk materials (glass, steel, aluminium, concrete, copper, zinc and synthetic materials) are applied intensively. By means of a life cycle analysis (LCA) the environmental effects and bottlenecks of the use of these materials is investigated in this report. Also attention is paid to the options to reduce the environmental effects of photovoltaic (PV) systems by changing processes and/or by redesign of the PV systems. Two systems are studied: solar cells, integrated in pitched roofs, and solar cells on the ground in solar cell arrays. The study is focused on the use of bulk materials in the solar module, the cables and the supporting construction. After brief introductions on the environment-oriented LCA method, the standard construction of PV modules and the principles of solar cells, an overview is given of the present and future material input for the above-mentioned PV-systems. Next, attention is paid to the energy consumption and the most important emissions of the production of the bulk materials. Based on these data three environmental effect scores of the PV systems are calculated and analyzed: the energy consumption, the greenhouse effect or global warming equivalent, and the acidifying effect or acidification equivalent. Also a fourth effect, for which the so-called environmental indicator human toxicity is defined, is described. By means of this indicator the hazardous effects for the public health can be indicated. The sum of the four indicators is a measure for the environmental profile of the roof PV-system and the ground PV-array system. Recommendations are given by which the systems and their environmental profiles can be improved. 29 figs., 50 tabs., 5 appendices, refs

Applying an Activity System to Online Collaborative Group Work Analysis

Science.gov (United States)

Choi, Hyungshin; Kang, Myunghee

2010-01-01

This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

Network analysis as a tool for assessing environmental sustainability: applying the ecosystem perspective to a Danish water management system

DEFF Research Database (Denmark)

Pizzol, Massimo; Scotti, Marco; Thomsen, Marianne

2013-01-01

New insights into the sustainable use of natural resources in human systems can be gained through comparison with ecosystems via common indices. In both kinds of system, resources are processed by a number of users within a network, but we consider ecosystems as the only ones displaying sustainable...... patterns of growth and development. We applied Network Analysis (NA) for assessing the sustainability of a Danish municipal Water Management System (WMS). We identified water users within the WMS and represented their interactions as a network of water flows. We computed intensive and extensive indices...

Research in applied mathematics, numerical analysis, and computer science

Science.gov (United States)

1984-01-01

Research conducted at the Institute for Computer Applications in Science and Engineering (ICASE) in applied mathematics, numerical analysis, and computer science is summarized and abstracts of published reports are presented. The major categories of the ICASE research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers.

Applied analysis and differential equations

CERN Document Server

Cârj, Ovidiu

2007-01-01

This volume contains refereed research articles written by experts in the field of applied analysis, differential equations and related topics. Well-known leading mathematicians worldwide and prominent young scientists cover a diverse range of topics, including the most exciting recent developments. A broad range of topics of recent interest are treated: existence, uniqueness, viability, asymptotic stability, viscosity solutions, controllability and numerical analysis for ODE, PDE and stochastic equations. The scope of the book is wide, ranging from pure mathematics to various applied fields such as classical mechanics, biomedicine, and population dynamics.

Social network analysis applied to team sports analysis

CERN Document Server

Clemente, Filipe Manuel; Mendes, Rui Sousa

2016-01-01

Explaining how graph theory and social network analysis can be applied to team sports analysis, This book presents useful approaches, models and methods that can be used to characterise the overall properties of team networks and identify the prominence of each team player. Exploring the different possible network metrics that can be utilised in sports analysis, their possible applications and variances from situation to situation, the respective chapters present an array of illustrative case studies. Identifying the general concepts of social network analysis and network centrality metrics, readers are shown how to generate a methodological protocol for data collection. As such, the book provides a valuable resource for students of the sport sciences, sports engineering, applied computation and the social sciences.

Analysis of a Braking System on the Basis of Structured Analysis Methods

OpenAIRE

Ben Salem J.; Lakhoua M.N.; El Amraoui L.

2016-01-01

In this paper, we present the general context of the research in the domain of analysis and modeling of mechatronic systems. In fact, we present à bibliographic review on some works of research about the systemic analysis of mechatronic systems. To better understand its characteristics, we start with an introduction about mechatronic systems and various fields related to these systems, after we present a few analysis and design methods applied to mechatronic systems. Finally, we apply the two...

Common cause evaluations in applied risk analysis of nuclear power plants

International Nuclear Information System (INIS)

Taniguchi, T.; Ligon, D.; Stamatelatos, M.

1983-04-01

Qualitative and quantitative approaches were developed for the evaluation of common cause failures (CCFs) in nuclear power plants and were applied to the analysis of the auxiliary feedwater systems of several pressurized water reactors (PWRs). Key CCF variables were identified through a survey of experts in the field and a review of failure experience in operating PWRs. These variables were classified into categories of high, medium, and low defense against a CCF. Based on the results, a checklist was developed for analyzing CCFs of systems. Several known techniques for quantifying CCFs were also reviewed. The information provided valuable insights in the development of a new model for estimating CCF probabilities, which is an extension of and improvement over the Beta Factor method. As applied to the analysis of the PWR auxiliary feedwater systems, the method yielded much more realistic values than the original Beta Factor method for a one-out-of-three system

Integrated piping structural analysis system

International Nuclear Information System (INIS)

Motoi, Toshio; Yamadera, Masao; Horino, Satoshi; Idehata, Takamasa

1979-01-01

Structural analysis of the piping system for nuclear power plants has become larger in scale and in quantity. In addition, higher quality analysis is regarded as of major importance nowadays from the point of view of nuclear plant safety. In order to fulfill to the above requirements, an integrated piping structural analysis system (ISAP-II) has been developed. Basic philosophy of this system is as follows: 1. To apply the date base system. All information is concentrated. 2. To minimize the manual process in analysis, evaluation and documentation. Especially to apply the graphic system as much as possible. On the basis of the above philosophy four subsystems were made. 1. Data control subsystem. 2. Analysis subsystem. 3. Plotting subsystem. 4. Report subsystem. Function of the data control subsystem is to control all information of the data base. Piping structural analysis can be performed by using the analysis subsystem. Isometric piping drawing and mode shape, etc. can be plotted by using the plotting subsystem. Total analysis report can be made without the manual process through the reporting subsystem. (author)

Applied survival analysis using R

CERN Document Server

Moore, Dirk F

2016-01-01

Applied Survival Analysis Using R covers the main principles of survival analysis, gives examples of how it is applied, and teaches how to put those principles to use to analyze data using R as a vehicle. Survival data, where the primary outcome is time to a specific event, arise in many areas of biomedical research, including clinical trials, epidemiological studies, and studies of animals. Many survival methods are extensions of techniques used in linear regression and categorical data, while other aspects of this field are unique to survival data. This text employs numerous actual examples to illustrate survival curve estimation, comparison of survivals of different groups, proper accounting for censoring and truncation, model variable selection, and residual analysis. Because explaining survival analysis requires more advanced mathematics than many other statistical topics, this book is organized with basic concepts and most frequently used procedures covered in earlier chapters, with more advanced topics...

System for corrosion monitoring in pipeline applying fuzzy logic mathematics

Science.gov (United States)

Kuzyakov, O. N.; Kolosova, A. L.; Andreeva, M. A.

2018-05-01

A list of factors influencing corrosion rate on the external side of underground pipeline is determined. Principles of constructing a corrosion monitoring system are described; the system performance algorithm and program are elaborated. A comparative analysis of methods for calculating corrosion rate is undertaken. Fuzzy logic mathematics is applied to reduce calculations while considering a wider range of corrosion factors.

Life-cycle analysis of renewable energy systems

DEFF Research Database (Denmark)

Sørensen, Bent

1994-01-01

An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants......An imlementation of life-cycle analysis (LCA) for energy systems is presented and applied to two renewable energy systems (wind turbines and building-integrated photovoltaic modules) and compared with coal plants...

Applied regression analysis a research tool

CERN Document Server

Pantula, Sastry; Dickey, David

1998-01-01

Least squares estimation, when used appropriately, is a powerful research tool. A deeper understanding of the regression concepts is essential for achieving optimal benefits from a least squares analysis. This book builds on the fundamentals of statistical methods and provides appropriate concepts that will allow a scientist to use least squares as an effective research tool. Applied Regression Analysis is aimed at the scientist who wishes to gain a working knowledge of regression analysis. The basic purpose of this book is to develop an understanding of least squares and related statistical methods without becoming excessively mathematical. It is the outgrowth of more than 30 years of consulting experience with scientists and many years of teaching an applied regression course to graduate students. Applied Regression Analysis serves as an excellent text for a service course on regression for non-statisticians and as a reference for researchers. It also provides a bridge between a two-semester introduction to...

Application of functional analysis techniques to supervisory systems

International Nuclear Information System (INIS)

Lambert, Manuel; Riera, Bernard; Martel, Gregory

1999-01-01

The aim of this paper is to apply firstly two interesting functional analysis techniques for the design of supervisory systems for complex processes, and secondly to discuss the strength and the weaknesses of each of them. Two functional analysis techniques have been applied, SADT (Structured Analysis and Design Technique) and FAST (Functional Analysis System Technique) on a process, an example of a Water Supply Process Control (WSPC) system. These techniques allow a functional description of industrial processes. The paper briefly discusses the functions of a supervisory system and some advantages of the application of functional analysis for the design of a 'human' centered supervisory system. Then the basic principles of the two techniques applied on the WSPC system are presented. Finally, the different results obtained from the two techniques are discussed

Control system of the inspection robots group applying auctions and multi-criteria analysis for task allocation

Science.gov (United States)

Panfil, Wawrzyniec; Moczulski, Wojciech

2017-10-01

In the paper presented is a control system of a mobile robots group intended for carrying out inspection missions. The main research problem was to define such a control system in order to facilitate a cooperation of the robots resulting in realization of the committed inspection tasks. Many of the well-known control systems use auctions for tasks allocation, where a subject of an auction is a task to be allocated. It seems that in the case of missions characterized by much larger number of tasks than number of robots it will be better if robots (instead of tasks) are subjects of auctions. The second identified problem concerns the one-sided robot-to-task fitness evaluation. Simultaneous assessment of the robot-to-task fitness and task attractiveness for robot should affect positively for the overall effectiveness of the multi-robot system performance. The elaborated system allows to assign tasks to robots using various methods for evaluation of fitness between robots and tasks, and using some tasks allocation methods. There is proposed the method for multi-criteria analysis, which is composed of two assessments, i.e. robot's concurrency position for task among other robots and task's attractiveness for robot among other tasks. Furthermore, there are proposed methods for tasks allocation applying the mentioned multi-criteria analysis method. The verification of both the elaborated system and the proposed tasks' allocation methods was carried out with the help of simulated experiments. The object under test was a group of inspection mobile robots being a virtual counterpart of the real mobile-robot group.

Conversation Analysis in Applied Linguistics

DEFF Research Database (Denmark)

Kasper, Gabriele; Wagner, Johannes

2014-01-01

on applied CA, the application of basic CA's principles, methods, and findings to the study of social domains and practices that are interactionally constituted. We consider three strands—foundational, social problem oriented, and institutional applied CA—before turning to recent developments in CA research...... on learning and development. In conclusion, we address some emerging themes in the relationship of CA and applied linguistics, including the role of multilingualism, standard social science methods as research objects, CA's potential for direct social intervention, and increasing efforts to complement CA......For the last decade, conversation analysis (CA) has increasingly contributed to several established fields in applied linguistics. In this article, we will discuss its methodological contributions. The article distinguishes between basic and applied CA. Basic CA is a sociological endeavor concerned...

Dynamical Systems Analysis Applied to Working Memory Data

Directory of Open Access Journals (Sweden)

Fidan eGasimova

2014-07-01

Full Text Available In the present paper we investigate weekly fluctuations in the working memory capacity (WMC assessed over a period of two years. We use dynamical system analysis, specifically a second order linear differential equation, to model weekly variability in WMC in a sample of 112 9th graders. In our longitudinal data we use a B-spline imputation method to deal with missing data. The results show a significant negative frequency parameter in the data, indicating a cyclical pattern in weekly memory updating performance across time. We use a multilevel modeling approach to capture individual differences in model parameters and find that a higher initial performance level and a slower improvement at the MU task is associated with a slower frequency of oscillation. Additionally, we conduct a simulation study examining the analysis procedure’s performance using different numbers of B-spline knots and values of time delay embedding dimensions. Results show that the number of knots in the B-spline imputation influence accuracy more than the number of embedding dimensions.

Analysis of risk reduction measures applied to shared essential service water systems at multi-unit sites

International Nuclear Information System (INIS)

Kohut, P.; Musicki, Z.; Fitzpatrick, R.

1991-06-01

This report summarizes a study performed by Brookhaven National Laboratory for the US Nuclear Regulatory Commission in support of the resolution of NRC Generic Issue 130. GI-130 is concerned with the potential core damage vulnerability resulting from failure of the emergency service water (ESW) system in selected multiplant units. These multiplant units are all twin pressurized water reactor designs that have only two ESW pumps per unit (one per train) backed up by a unit crosstie capability. This generic issue applies to seven US sites (14 plants). The study established and analyzed the core damage vulnerability and identified potential improvements for the ESW system. It obtained generic estimates of the risk reduction potential and cost effectiveness of each potential improvement. The analysis also investigated the cost/benefit aspects of selected combinations of potential improvements. 4 figs., 62 tabs

[Microinjection Monitoring System Design Applied to MRI Scanning].

Science.gov (United States)

Xu, Yongfeng

2017-09-30

A microinjection monitoring system applied to the MRI scanning was introduced. The micro camera probe was used to stretch into the main magnet for real-time video injection monitoring of injection tube terminal. The programming based on LabVIEW was created to analysis and process the real-time video information. The feedback signal was used for intelligent controlling of the modified injection pump. The real-time monitoring system can make the best use of injection under the condition that the injection device was away from the sample which inside the magnetic room and unvisible. 9.4 T MRI scanning experiment showed that the system in ultra-high field can work stability and doesn't affect the MRI scans.

Water-food-energy nexus index: analysis of water-energy-food nexus of crop's production system applying the indicators approach

Science.gov (United States)

El-Gafy, Inas

2017-10-01

Analysis the water-food-energy nexus is the first step to assess the decision maker in developing and evaluating national strategies that take into account the nexus. The main objective of the current research is providing a method for the decision makers to analysis the water-food-energy nexus of the crop production system at the national level and carrying out a quantitative assessment of it. Through the proposed method, indicators considering the water and energy consumption, mass productivity, and economic productivity were suggested. Based on these indicators a water-food-energy nexus index (WFENI) was performed. The study showed that the calculated WFENI of the Egyptian summer crops have scores that range from 0.21 to 0.79. Comparing to onion (the highest scoring WFENI,i.e., the best score), rice has the lowest WFENI among the summer food crops. Analysis of the water-food-energy nexus of forty-two Egyptian crops in year 2010 was caried out (energy consumed for irrigation represent 7.4% of the total energy footprint). WFENI can be applied to developed strategies for the optimal cropping pattern that minimizing the water and energy consumption and maximizing their productivity. It can be applied as a holistic tool to evaluate the progress in the water and agricultural national strategies. Moreover, WFENI could be applied yearly to evaluate the performance of the water-food-energy nexus managmant.

Applied research in uncertainty modeling and analysis

CERN Document Server

Ayyub, Bilal

2005-01-01

Uncertainty has been a concern to engineers, managers, and scientists for many years. For a long time uncertainty has been considered synonymous with random, stochastic, statistic, or probabilistic. Since the early sixties views on uncertainty have become more heterogeneous. In the past forty years numerous tools that model uncertainty, above and beyond statistics, have been proposed by several engineers and scientists. The tool/method to model uncertainty in a specific context should really be chosen by considering the features of the phenomenon under consideration, not independent of what is known about the system and what causes uncertainty. In this fascinating overview of the field, the authors provide broad coverage of uncertainty analysis/modeling and its application. Applied Research in Uncertainty Modeling and Analysis presents the perspectives of various researchers and practitioners on uncertainty analysis and modeling outside their own fields and domain expertise. Rather than focusing explicitly on...

Sensitivity analysis in multi-parameter probabilistic systems

International Nuclear Information System (INIS)

Walker, J.R.

1987-01-01

Probabilistic methods involving the use of multi-parameter Monte Carlo analysis can be applied to a wide range of engineering systems. The output from the Monte Carlo analysis is a probabilistic estimate of the system consequence, which can vary spatially and temporally. Sensitivity analysis aims to examine how the output consequence is influenced by the input parameter values. Sensitivity analysis provides the necessary information so that the engineering properties of the system can be optimized. This report details a package of sensitivity analysis techniques that together form an integrated methodology for the sensitivity analysis of probabilistic systems. The techniques have known confidence limits and can be applied to a wide range of engineering problems. The sensitivity analysis methodology is illustrated by performing the sensitivity analysis of the MCROC rock microcracking model

Applying Fuzzy and Probabilistic Uncertainty Concepts to the Material Flow Analysis of Palladium in Austria

DEFF Research Database (Denmark)

Laner, David; Rechberger, Helmut; Astrup, Thomas Fruergaard

2015-01-01

Material flow analysis (MFA) is a widely applied tool to investigate resource and recycling systems of metals and minerals. Owing to data limitations and restricted system understanding, MFA results are inherently uncertain. To demonstrate the systematic implementation of uncertainty analysis in ...

Concept analysis of culture applied to nursing.

Science.gov (United States)

Marzilli, Colleen

2014-01-01

Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.

VIABILITY OF SOME APPLIED COST SYSTEMS IN MANUFACTURING FIRMS: EGYPT'S CASE

Directory of Open Access Journals (Sweden)

Karim Mamdouh ABBAS

2015-04-01

Full Text Available The present study aims to analyze viability of some applied cost systems. The population of the study is some Egyptian manufacturing firms. The number of received questionnaires was 385. The results indicated that , according to the application extent indicator, the currently cost systems in Egyptian manufacturing firms may be descendingly arranged as follows: Activity Based Costing (ABC system, Target Costing (TC system , Resource Consumption Accounting (RCA system, Activity Based Management (ABM ,Other systems, Theory of Constraints (TOC and Value Chain (VC analysis.

Multi-attribute criteria applied to electric generation energy system analysis LDRD.

Energy Technology Data Exchange (ETDEWEB)

Kuswa, Glenn W.; Tsao, Jeffrey Yeenien; Drennen, Thomas E.; Zuffranieri, Jason V.; Paananen, Orman Henrie; Jones, Scott A.; Ortner, Juergen G. (DLR, German Aerospace, Cologne); Brewer, Jeffrey D.; Valdez, Maximo M.

2005-10-01

This report began with a Laboratory-Directed Research and Development (LDRD) project to improve Sandia National Laboratories multidisciplinary capabilities in energy systems analysis. The aim is to understand how various electricity generating options can best serve needs in the United States. The initial product is documented in a series of white papers that span a broad range of topics, including the successes and failures of past modeling studies, sustainability, oil dependence, energy security, and nuclear power. Summaries of these projects are included here. These projects have provided a background and discussion framework for the Energy Systems Analysis LDRD team to carry out an inter-comparison of many of the commonly available electric power sources in present use, comparisons of those options, and efforts needed to realize progress towards those options. A computer aid has been developed to compare various options based on cost and other attributes such as technological, social, and policy constraints. The Energy Systems Analysis team has developed a multi-criteria framework that will allow comparison of energy options with a set of metrics that can be used across all technologies. This report discusses several evaluation techniques and introduces the set of criteria developed for this LDRD.

E16 Sandvika-Wøyen - Analysis of tunnel excavation, achieved contour quality and influence of applied initiation system.

OpenAIRE

Sklodowska, Anna Maria

2016-01-01

The drill and blast excavation method is the most commonly used method for tunnel construction in Norway. In D&B the results from blasting can be evaluated through several factors, such as pull percentage, vibration level and contour quality. The main goal of the thesis was to analyze excavation with a special focus on the quality of the achieved contour and the influence of the applied initiation system. The analysis was performed based on results from the Bjørnegård tunnel, which wa...

Moving Forward: Positive Behavior Support and Applied Behavior Analysis

Science.gov (United States)

Tincani, Matt

2007-01-01

A controversy has emerged about the relationship between positive behavior support and applied behavior analysis. Some behavior analysts suggest that positive behavior support and applied behavior analysis are the same (e.g., Carr & Sidener, 2002). Others argue that positive behavior support is harmful to applied behavior analysis (e.g., Johnston,…

Computer aided instrumented Charpy test applied dynamic fracture toughness evaluation system

International Nuclear Information System (INIS)

Kobayashi, Toshiro; Niinomi, Mitsuo

1986-01-01

Micro computer aided data treatment system and personal computer aided data analysis system were applied to the traditional instrumented Charpy impact test system. The analysis of Charpy absorbed energy (E i , E p , E t ) and load (P y , P m ), and the evaluation of dynamic toughness through whole fracture process, i.e. J Id , J R curve and T mat was examined using newly developed computer aided instrumented Charpy impact test system. E i , E p , E t , P y and P m were effectively analyzed using moving average method and printed out automatically by micro computer aided data treatment system. J Id , J R curve and T mat could be measured by stop block test method. Then, J Id , J R curve and T mat were effectively estimated using compliance changing rate method and key curve method on the load-load point displacement curve of single fatigue cracked specimen by personal computer aided data analysis system. (author)

Applied systems theory

CERN Document Server

Dekkers, Rob

2017-01-01

Offering an up-to-date account of systems theories and its applications, this book provides a different way of resolving problems and addressing challenges in a swift and practical way, without losing overview and grip on the details. From this perspective, it offers a different way of thinking in order to incorporate different perspectives and to consider multiple aspects of any given problem. Drawing examples from a wide range of disciplines, it also presents worked cases to illustrate the principles. The multidisciplinary perspective and the formal approach to modelling of systems and processes of ‘Applied Systems Theory’ makes it suitable for managers, engineers, students, researchers, academics and professionals from a wide range of disciplines; they can use this ‘toolbox’ for describing, analysing and designing biological, engineering and organisational systems as well as getting a better understanding of societal problems. This revised, updated and expanded second edition includes coverage of a...

Meta-learning framework applied in bioinformatics inference system design.

Science.gov (United States)

Arredondo, Tomás; Ormazábal, Wladimir

2015-01-01

This paper describes a meta-learner inference system development framework which is applied and tested in the implementation of bioinformatic inference systems. These inference systems are used for the systematic classification of the best candidates for inclusion in bacterial metabolic pathway maps. This meta-learner-based approach utilises a workflow where the user provides feedback with final classification decisions which are stored in conjunction with analysed genetic sequences for periodic inference system training. The inference systems were trained and tested with three different data sets related to the bacterial degradation of aromatic compounds. The analysis of the meta-learner-based framework involved contrasting several different optimisation methods with various different parameters. The obtained inference systems were also contrasted with other standard classification methods with accurate prediction capabilities observed.

Matrix effects in applying mono- and polyclonal ELISA systems to the analysis of weathered oils in contaminated soil.

Science.gov (United States)

Pollard, S J T; Farmer, J G; Knight, D M; Young, P J

2002-01-01

Commercial mono- and polyclonal enzyme-linked immunosorbent assay (ELISA) systems were applied to the on-site analysis of weathered hydrocarbon-contaminated soils at a former integrated steelworks. Comparisons were made between concentrations of solvent extractable matter (SEM) determined gravimetrically by Soxhlet (dichloromethane) extraction and those estimated immunologically by ELISA determination over a concentration range of 2000-330,000 mg SEM/kg soil dry weight. Both ELISA systems tinder-reported for the more weathered soil samples. Results suggest this is due to matrix effects in the sample rather than any inherent bias in the ELISA systems and it is concluded that, for weathered hydrocarbons typical of steelworks and coke production sites, the use of ELISA requires careful consideration as a field technique. Consideration of the target analyte relative to the composition of the hydrocarbon waste encountered appears critical.

The Safeguards analysis applied to the RRP. Automatic sampling authentication system

International Nuclear Information System (INIS)

Ono, Sawako; Nakashima, Shinichi; Iwamoto, Tomonori

2004-01-01

The sampling for analysis from vessels and columns at the Rokkasho Reprocessing Plant (RRP) is performed mostly by the automatic sampling system. The safeguards sample for the verification also will be taken using these sampling systems and transfer to the OSL though the pneumatic transfer network owned and controlled by operator. In order to maintaining sample integrity and continuity of knowledge (CoK) for throughout the sample processing. It is essential to develop and establish the authentication measures for the automatic sampling system including transfer network. We have developed the Automatic Sampling Authentication System (ASAS) under consultation by IAEA. This paper describes structure, function and concept of ASAS. (author)

Topological data analysis (TDA) applied to reveal pedogenetic principles of European topsoil system.

Science.gov (United States)

Savic, Aleksandar; Toth, Gergely; Duponchel, Ludovic

2017-05-15

Recent developments in applied mathematics are bringing new tools that are capable to synthesize knowledge in various disciplines, and help in finding hidden relationships between variables. One such technique is topological data analysis (TDA), a fusion of classical exploration techniques such as principal component analysis (PCA), and a topological point of view applied to clustering of results. Various phenomena have already received new interpretations thanks to TDA, from the proper choice of sport teams to cancer treatments. For the first time, this technique has been applied in soil science, to show the interaction between physical and chemical soil attributes and main soil-forming factors, such as climate and land use. The topsoil data set of the Land Use/Land Cover Area Frame survey (LUCAS) was used as a comprehensive database that consists of approximately 20,000 samples, each described by 12 physical and chemical parameters. After the application of TDA, results obtained were cross-checked against known grouping parameters including five types of land cover, nine types of climate and the organic carbon content of soil. Some of the grouping characteristics observed using standard approaches were confirmed by TDA (e.g., organic carbon content) but novel subtle relationships (e.g., magnitude of anthropogenic effect in soil formation), were discovered as well. The importance of this finding is that TDA is a unique mathematical technique capable of extracting complex relations hidden in soil science data sets, giving the opportunity to see the influence of physicochemical, biotic and abiotic factors on topsoil formation through fresh eyes. Copyright © 2017 Elsevier B.V. All rights reserved.

Applied research and development of neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

2000-05-01

This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques.

Applied research and development of neutron activation analysis

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

2000-05-01

This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques

Critical Education for Systemic Change: A World-Systems Analysis Perspective

Science.gov (United States)

Griffiths, Tom G.

2015-01-01

This paper both draws on, and seeks to apply, world-systems analysis to a broad, critical education project that builds mass schooling's potential contribution to the process of world-systemic change. In short, this is done by first setting out the world-systems analysis account of the current state, and period of transition, of the capitalist…

Building an applied activation analysis centre

International Nuclear Information System (INIS)

Bartosek, J.; Kasparec, I.; Masek, J.

1972-01-01

Requirements are defined and all available background material is reported and discussed for the building up of a centre of applied activation analysis in Czechoslovakia. A detailed analysis of potential users and the centre's envisaged availability is also presented as part of the submitted study. A brief economic analysis is annexed. The study covers the situation up to the end of 1972. (J.K.)

Preliminary Hazard Analysis applied to Uranium Hexafluoride - UF6 production plant

International Nuclear Information System (INIS)

Tomzhinsky, David; Bichmacher, Ricardo; Braganca Junior, Alvaro; Peixoto, Orpet Jose

1996-01-01

The purpose of this paper is to present the results of the Preliminary hazard Analysis applied to the UF 6 Production Process, which is part of the UF 6 Conversion Plant. The Conversion Plant has designed to produce a high purified UF 6 in accordance with the nuclear grade standards. This Preliminary Hazard Analysis is the first step in the Risk Management Studies, which are under current development. The analysis evaluated the impact originated from the production process in the plant operators, members of public, equipment, systems and installations as well as the environment. (author)

Applied Electromagnetics

Energy Technology Data Exchange (ETDEWEB)

Yamashita, H; Marinova, I; Cingoski, V [eds.

2002-07-01

These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics.

Applied Electromagnetics

International Nuclear Information System (INIS)

Yamashita, H.; Marinova, I.; Cingoski, V.

2002-01-01

These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics

Caldwell University's Department of Applied Behavior Analysis.

Science.gov (United States)

Reeve, Kenneth F; Reeve, Sharon A

2016-05-01

Since 2004, faculty members at Caldwell University have developed three successful graduate programs in Applied Behavior Analysis (i.e., PhD, MA, non-degree programs), increased program faculty from two to six members, developed and operated an on-campus autism center, and begun a stand-alone Applied Behavior Analysis Department. This paper outlines a number of strategies used to advance these initiatives, including those associated with an extensive public relations campaign. We also outline challenges that have limited our programs' growth. These strategies, along with a consideration of potential challenges, might prove useful in guiding academicians who are interested in starting their own programs in behavior analysis.

FZKA, Department of Applied Systems Analysis. R + D activities in 1994

International Nuclear Information System (INIS)

1995-01-01

The Department worked in the fields of technology assessment, marterials flow analysis, and socioeconomic environmental research. The characteristic feature of AFAS work is its systems-analytical approach and the interdisciplinary cooperation between scientists, engineers, economists and social scientists. (orig./HP) [de

Municipal solid waste management system: decision support through systems analysis

OpenAIRE

Pires, Ana Lúcia Lourenço

2010-01-01

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia for the degree of Doctor of Philosophy in Environmental Engineering The present study intends to show the development of systems analysis model applied to solid waste management system, applied into AMARSUL, a solid waste management system responsible for the management of municipal solid waste produced in Setúbal peninsula, Portugal. The model developed intended to promote sustainable decision making, ...

Mechatronic Systems Analysis, Design and Implementation

CERN Document Server

Boukas, El-Kébir

2012-01-01

This book deals with the analysis, the design and the implementation of the mechatronic systems. Classical and modern tools are developed for the analysis and the design for such systems. Robust control, H-Infinity and guaranteed cost control theory are also used for analysis and design of mechatronic systems. Different controller such as state feedback, static output feedback and dynamic output feedback controllers are used to stabilize mechatronic systems. Heuristic algorithms are provided to solve the design of the classical controller such as PID, phase lead, phase lag and phase lead-lag controllers while linear matrix inequalities (LMI) algorithms are provided for finding solutions to the state feedback, static output feedback and dynamic output feedback controllers. The theory presented in the different chapters of the volume is applied to numerical examples to show the usefulness of the theoretical results. Some case studies are also provided to show how the developed concepts apply for real system. Em...

Analysis of the interaction between experimental and applied behavior analysis.

Science.gov (United States)

Virues-Ortega, Javier; Hurtado-Parrado, Camilo; Cox, Alison D; Pear, Joseph J

2014-01-01

To study the influences between basic and applied research in behavior analysis, we analyzed the coauthorship interactions of authors who published in JABA and JEAB from 1980 to 2010. We paid particular attention to authors who published in both JABA and JEAB (dual authors) as potential agents of cross-field interactions. We present a comprehensive analysis of dual authors' coauthorship interactions using social networks methodology and key word analysis. The number of dual authors more than doubled (26 to 67) and their productivity tripled (7% to 26% of JABA and JEAB articles) between 1980 and 2010. Dual authors stood out in terms of number of collaborators, number of publications, and ability to interact with multiple groups within the field. The steady increase in JEAB and JABA interactions through coauthors and the increasing range of topics covered by dual authors provide a basis for optimism regarding the progressive integration of basic and applied behavior analysis. © Society for the Experimental Analysis of Behavior.

The x-rays fluorescence applied to the analysis of alloys

International Nuclear Information System (INIS)

Gutierrez, D.A.

1997-01-01

This work is based on the utilization of the Fluorescence of X Rays. This technique of non destructive trial, has the purpose to establish a routine method, for the control of the conformation of industrial samples used. It makes an analysis with a combination of the algorithms of Rasberry-Heinrich and Claisse-Thinh. Besides, the numerical implementation of non usual techniques in this type of analysis. Such as the Linear Programming applied to the solution of super determined systems, of equations and the utilization of methods of relaxation to facilitate the convergence to the solutions. (author) [es

Development of adaptive control applied to chaotic systems

Science.gov (United States)

Rhode, Martin Andreas

1997-12-01

Continuous-time derivative control and adaptive map-based recursive feedback control techniques are used to control chaos in a variety of systems and in situations that are of practical interest. The theoretical part of the research includes the review of fundamental concept of control theory in the context of its applications to deterministic chaotic systems, the development of a new adaptive algorithm to identify the linear system properties necessary for control, and the extension of the recursive proportional feedback control technique, RPF, to high dimensional systems. Chaos control was applied to models of a thermal pulsed combustor, electro-chemical dissolution and the hyperchaotic Rossler system. Important implications for combustion engineering were suggested by successful control of the model of the thermal pulsed combustor. The system was automatically tracked while maintaining control into regions of parameter and state space where no stable attractors exist. In a simulation of the electrochemical dissolution system, application of derivative control to stabilize a steady state, and adaptive RPF to stabilize a period one orbit, was demonstrated. The high dimensional adaptive control algorithm was applied in a simulation using the Rossler hyperchaotic system, where a period-two orbit with two unstable directions was stabilized and tracked over a wide range of a system parameter. In the experimental part, the electrochemical system was studied in parameter space, by scanning the applied potential and the frequency of the rotating copper disk. The automated control algorithm is demonstrated to be effective when applied to stabilize a period-one orbit in the experiment. We show the necessity of small random perturbations applied to the system in order to both learn the dynamics and control the system at the same time. The simultaneous learning and control capability is shown to be an important part of the active feedback control.

Applied Behavior Analysis and Statistical Process Control?

Science.gov (United States)

Hopkins, B. L.

1995-01-01

Incorporating statistical process control (SPC) methods into applied behavior analysis is discussed. It is claimed that SPC methods would likely reduce applied behavior analysts' intimate contacts with problems and would likely yield poor treatment and research decisions. Cases and data presented by Pfadt and Wheeler (1995) are cited as examples.…

Hyperspectral imaging applied to complex particulate solids systems

Science.gov (United States)

Bonifazi, Giuseppe; Serranti, Silvia

2008-04-01

HyperSpectral Imaging (HSI) is based on the utilization of an integrated hardware and software (HW&SW) platform embedding conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Although HSI was originally developed for remote sensing, it has recently emerged as a powerful process analytical tool, for non-destructive analysis, in many research and industrial sectors. The possibility to apply on-line HSI based techniques in order to identify and quantify specific particulate solid systems characteristics is presented and critically evaluated. The originally developed HSI based logics can be profitably applied in order to develop fast, reliable and lowcost strategies for: i) quality control of particulate products that must comply with specific chemical, physical and biological constraints, ii) performance evaluation of manufacturing strategies related to processing chains and/or realtime tuning of operative variables and iii) classification-sorting actions addressed to recognize and separate different particulate solid products. Case studies, related to recent advances in the application of HSI to different industrial sectors, as agriculture, food, pharmaceuticals, solid waste handling and recycling, etc. and addressed to specific goals as contaminant detection, defect identification, constituent analysis and quality evaluation are described, according to authors' originally developed application.

Cross-impact balances. Applying pair interaction systems and multi-value Kauffman nets to multidisciplinary systems analysis

Science.gov (United States)

Weimer-Jehle, Wolfgang

2008-06-01

Cross-impact analysis is the name for a familiar method for multidisciplinary systems analysis in social sciences and management sciences, especially in technology foresight, technology assessment and scenario planning. A recently proposed form of cross-impact analysis, CIB, may be of interest for physicists, sociophysicists and complex network researchers because the CIB concept reveals considerable relations to some concepts of these research fields. This article describes the basics of CIB analysis framework, its applications in the social sciences, and its relations to the equilibrium points of pair interaction systems, random graphs, and generalized Kauffman nets. Therefore CIB can be seen as a merger of concepts originating in utterly different scientific fields. This may prove to be fruitful for both sides: For sociophysicists as an example of the application of complex network concepts in the social sciences and for cross-impact practitioners as a source of theoretical insights in the background of their tool.

Applied multivariate statistical analysis

CERN Document Server

Härdle, Wolfgang Karl

2015-01-01

Focusing on high-dimensional applications, this 4th edition presents the tools and concepts used in multivariate data analysis in a style that is also accessible for non-mathematicians and practitioners.  It surveys the basic principles and emphasizes both exploratory and inferential statistics; a new chapter on Variable Selection (Lasso, SCAD and Elastic Net) has also been added.  All chapters include practical exercises that highlight applications in different multivariate data analysis fields: in quantitative financial studies, where the joint dynamics of assets are observed; in medicine, where recorded observations of subjects in different locations form the basis for reliable diagnoses and medication; and in quantitative marketing, where consumers’ preferences are collected in order to construct models of consumer behavior.  All of these examples involve high to ultra-high dimensions and represent a number of major fields in big data analysis. The fourth edition of this book on Applied Multivariate ...

Applied linear algebra and matrix analysis

CERN Document Server

Shores, Thomas S

2018-01-01

In its second edition, this textbook offers a fresh approach to matrix and linear algebra. Its blend of theory, computational exercises, and analytical writing projects is designed to highlight the interplay between these aspects of an application. This approach places special emphasis on linear algebra as an experimental science that provides tools for solving concrete problems. The second edition’s revised text discusses applications of linear algebra like graph theory and network modeling methods used in Google’s PageRank algorithm. Other new materials include modeling examples of diffusive processes, linear programming, image processing, digital signal processing, and Fourier analysis. These topics are woven into the core material of Gaussian elimination and other matrix operations; eigenvalues, eigenvectors, and discrete dynamical systems; and the geometrical aspects of vector spaces. Intended for a one-semester undergraduate course without a strict calculus prerequisite, Applied Linear Algebra and M...

Classical linear-control analysis applied to business-cycle dynamics and stability

Science.gov (United States)

Wingrove, R. C.

1983-01-01

Linear control analysis is applied as an aid in understanding the fluctuations of business cycles in the past, and to examine monetary policies that might improve stabilization. The analysis shows how different policies change the frequency and damping of the economic system dynamics, and how they modify the amplitude of the fluctuations that are caused by random disturbances. Examples are used to show how policy feedbacks and policy lags can be incorporated, and how different monetary strategies for stabilization can be analytically compared. Representative numerical results are used to illustrate the main points.

Machine Learning Method Applied in Readout System of Superheated Droplet Detector

Science.gov (United States)

Liu, Yi; Sullivan, Clair Julia; d'Errico, Francesco

2017-07-01

Direct readability is one advantage of superheated droplet detectors in neutron dosimetry. Utilizing such a distinct characteristic, an imaging readout system analyzes image of the detector for neutron dose readout. To improve the accuracy and precision of algorithms in the imaging readout system, machine learning algorithms were developed. Deep learning neural network and support vector machine algorithms are applied and compared with generally used Hough transform and curvature analysis methods. The machine learning methods showed a much higher accuracy and better precision in recognizing circular gas bubbles.

A Novel Surveillance System Applied in Civil Airport

Directory of Open Access Journals (Sweden)

Sun Hua Bo

2016-01-01

Full Text Available Conventional security monitoring of civil airport usually uses a fixed camera to acquire images. There are several problems with performance including difficulties introduced in the information transmission, storage, and analysis of the process. Insect compound eyes offer unique advantages for moving target capture and these have attracted the attention of many researchers in recent years. This paper contributes to this research by proposing a new surveillance system applied in civil airport. We discuss the finished bionic structure of the system, the development of the bionic control circuit, and introduce the proposed mathematical model of bionic compound eyes for data acquisition and image mosaic. Image matching for large view is also illustrated with different conditions. This mode and algorithm effectively achieve safety surveillance of airport with large field of view and high real-time processing.

Expert systems for assisting the analysis of hazards

International Nuclear Information System (INIS)

Evrard, J.M.; Martinez, J.M.; Souchet, Y.

1990-01-01

The advantage of applying expert systems in the analysis of safety in the operation of nuclear power plants is discussed. Expert systems apply a method based on a common representation of nuclear power plants. The main steps of the method are summarized. The applications given concern in the following fields: the analysis of hazards in the electric power supplies of a gas-graphite power plant; the evaluation of the availability of safety procedures in a PWR power plant; the search for the sources of leakage in a PWR power plant. The analysis shows that expert systems are a powerful tool in the study of safety of nuclear power plants [fr

Thermodynamic Laws Applied to Economic Systems

Science.gov (United States)

González, José Villacís

2009-01-01

Economic activity in its different manifestations--production, exchange, consumption and, particularly, information on quantities and prices--generates and transfers energy. As a result, we can apply to it the basic laws of thermodynamics. These laws are applicable within a system, i.e., in a country or between systems and countries. To these…

Applying systems ergonomics methods in sport: A systematic review.

Science.gov (United States)

Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

2018-04-16

As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

Applying homotopy analysis method for solving differential-difference equation

International Nuclear Information System (INIS)

Wang Zhen; Zou Li; Zhang Hongqing

2007-01-01

In this Letter, we apply the homotopy analysis method to solving the differential-difference equations. A simple but typical example is applied to illustrate the validity and the great potential of the generalized homotopy analysis method in solving differential-difference equation. Comparisons are made between the results of the proposed method and exact solutions. The results show that the homotopy analysis method is an attractive method in solving the differential-difference equations

WiFi Data Acquisition System Applied to a Photovoltaic Powered Water Pumping Plant

Directory of Open Access Journals (Sweden)

Sandro César Silveira JUCÁ

2015-02-01

Full Text Available The present paper describes how to design and assemble a low cost online monitoring and WiFi data acquisition system using free software applied to microgeneration based on renewable energy sources. The development of online monitoring systems for microgeneration plants based on renewable energy sources is becoming more important, considering that monitoring and data acquisition systems are applicable in stages of the microgeneration process. The monitoring and data acquisition WiFi system was developed using an embedded WiFi modem (Wifly coupled to a microcontrolled board based on the free tool SanUSB. This monitoring system was applied to a photovoltaic (PV water pumping plant without batteries, so as the control system and the wireless communication with the online server, which is also autonomous and powered by PV panel. The free software for online monitoring and WiFi data acquisition allows the analysis of stored data and charts through mobile devices as notebooks, tablets and smartphones.

Digraph Matrix Analysis: A new approach to systems interaction analysis

International Nuclear Information System (INIS)

Sacks, I.J.; Alesso, H.P.; Ashmore, B.C.

1985-01-01

The term Systems Interaction was introduced by the Nuclear Regulatory Commission to identify interdependency of safety and support systems. Digraph Matrix Analysis was developed to allow the determination of these interdependencies. The main features of DMA are: the reliability model is traced directly from system schematics, all components of front line and support systems are included in a single integrated model, and the model is processed automatically with no heuristic culling applied. The recent application of DMA to the Indian Point-3 systems interaction analysis resulted in the discovery of several significant deeply hidden systems interactions

Multidisciplinary System Reliability Analysis

Science.gov (United States)

Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

2001-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

An expert image analysis system for chromosome analysis application

International Nuclear Information System (INIS)

Wu, Q.; Suetens, P.; Oosterlinck, A.; Van den Berghe, H.

1987-01-01

This paper reports a recent study on applying a knowledge-based system approach as a new attempt to solve the problem of chromosome classification. A theoretical framework of an expert image analysis system is proposed, based on such a study. In this scheme, chromosome classification can be carried out under a hypothesize-and-verify paradigm, by integrating a rule-based component, in which the expertise of chromosome karyotyping is formulated with an existing image analysis system which uses conventional pattern recognition techniques. Results from the existing system can be used to bring in hypotheses, and with the rule-based verification and modification procedures, improvement of the classification performance can be excepted

Applying Authentic Data Analysis in Learning Earth Atmosphere

Science.gov (United States)

Johan, H.; Suhandi, A.; Samsudin, A.; Wulan, A. R.

2017-09-01

The aim of this research was to develop earth science learning material especially earth atmosphere supported by science research with authentic data analysis to enhance reasoning through. Various earth and space science phenomenon require reasoning. This research used experimental research with one group pre test-post test design. 23 pre-service physics teacher participated in this research. Essay test was conducted to get data about reason ability. Essay test was analyzed quantitatively. Observation sheet was used to capture phenomena during learning process. The results showed that student’s reasoning ability improved from unidentified and no reasoning to evidence based reasoning and inductive/deductive rule-based reasoning. Authentic data was considered using Grid Analysis Display System (GrADS). Visualization from GrADS facilitated students to correlate the concepts and bring out real condition of nature in classroom activity. It also helped student to reason the phenomena related to earth and space science concept. It can be concluded that applying authentic data analysis in learning process can help to enhance students reasoning. This study is expected to help lecture to bring out result of geoscience research in learning process and facilitate student understand concepts.

Applying systems engineering in the civil engineering industry : an analysis of systems engineering projects of a Dutch water board

NARCIS (Netherlands)

de Graaf, R. S. (Robin); Vromen, R. M.(Rick); Boes, J. (Hans)

2017-01-01

The past decade, practice and literature have shown an increasing interest in Systems Engineering (SE) in the civil engineering industry. The aim of this study is to analyse to what extent SE is applied in six civil engineering SE projects of a Dutch water board. The projects were analysed using a

Pressurized water reactor system model for control system design and analysis

International Nuclear Information System (INIS)

Cooper, K.F.; Cain, J.T.

1975-01-01

Satisfactory operation of present generation Pressurized Water Reactor (PWR) Nuclear Power systems requires that several independent and interactive control systems be designed. Since it is not practical to use an actual PWR system as a design tool, a mathematical model of the system must be developed as a design and analysis tool. The model presented has been developed to be used as an aid in applying optimal control theory to design and implement new control systems for PWR plants. To be applicable, the model developed must represent the PWR system in its normal operating range. For safety analysis the operating conditions of the system are usually abnormal and, therefore, the system modeling requirements are different from those for control system design and analysis

Exergy Analysis of Complex Ship Energy Systems

Directory of Open Access Journals (Sweden)

Pierre Marty

2016-04-01

Full Text Available With multiple primary and secondary energy converters (diesel engines, steam turbines, waste heat recovery (WHR and oil-fired boilers, etc. and extensive energy networks (steam, cooling water, exhaust gases, etc., ships may be considered as complex energy systems. Understanding and optimizing such systems requires advanced holistic energy modeling. This modeling can be done in two ways: The simpler approach focuses on energy flows, and has already been tested, approved and presented; a new, more complicated approach, focusing on energy quality, i.e., exergy, is presented in this paper. Exergy analysis has rarely been applied to ships, and, as a general rule, the shipping industry is not familiar with this tool. This paper tries to fill this gap. We start by giving a short reminder of what exergy is and describe the principles of exergy modeling to explain what kind of results should be expected from such an analysis. We then apply these principles to the analysis of a large two-stroke diesel engine with its cooling and exhaust systems. Simulation results are then presented along with the exergy analysis. Finally, we propose solutions for energy and exergy saving which could be applied to marine engines and ships in general.

Regional LLRW [low-level radioactive waste] processing alternatives applying the DOE REGINALT systems analysis model

International Nuclear Information System (INIS)

Beers, G.H.

1987-01-01

The DOE Low-Level Waste Management Progam has developed a computer-based decision support system of models that may be used by nonprogrammers to evaluate a comprehensive approach to commercial low-level radioactive waste (LLRW) management. REGINALT (Regional Waste Management Alternatives Analysis Model) implementation will be described as the model is applied to a hypothetical regional compact for the purpose of examining the technical and economic potential of two waste processing alternaties. Using waste from a typical regional compact, two specific regional waste processing centers will be compared for feasibility. Example 1 will assume will assume that a regional supercompaction facility is being developed for the region. Example 2 will assume that a regional facility with both supercompation and incineration is specified. Both examples will include identical disposal facilities, except that capacity may differ due to variation in volume reduction achieved. The two examples will be compared with regard to volume reduction achieved, estimated occupational exposure for the processing facilities, and life cylcle costs per generated unit waste. A base case will also illustrate current disposal practices. The results of the comparisons will be evaluated, and other steps, if necessary, for additional decision support will be identified

Systemic design methodologies for electrical energy systems analysis, synthesis and management

CERN Document Server

Roboam, Xavier

2012-01-01

This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partn...

The Analysis of Applying Different Coolants for Cooling Systems in the Office Building

Directory of Open Access Journals (Sweden)

Rasa Kanapienytė

2011-12-01

Full Text Available The paper analyzes air conditioning systems of different coolants on the basis of an example of a typical office building. Depending on the type of a coolant fan coil unit, active chilled beams, variable refrigerant volumes and air cooling systems were designed. The article suggests hydraulic and aerodynamic calculations and evaluates initial investments, energy expenditures and operating costs of the compared systems. Considering economic calculations, the pay-back time of the systems was assessed and the sensitivity analysis of electricity prices was carried out. The results of the conducted investigation show the most appropriate analysed system for office buildings taking into account the efficient use of electricity and initial investments.Article in Lithuanian

Plant introduction system applying virtual reality

International Nuclear Information System (INIS)

Kasai, Yasusuke; Tanaka, Kazuo; Kimura, Katsumi; Nakakosi, Tetsuhiro

1995-01-01

We developed the prototype of the introduction system for nuclear power plant applying 3D-CAD data and the virtual reality (V.R) technologies. For the purpose of the public acceptance (PA), the use of the V.R technologies, such as CG stereographic, will be interesting for the public. Also, it is very important to introduce the components of the plant in detail, which will become easy by using the 3D-CAD data of the nuclear plant. We made a prototype system for introducing the main portion of the nuclear power plant, such as main control room, containment vessel or turbine building, applying CG stereographic by plant 3D data and artificial voice guidance for the explanations. We have exhibited this system in two local festivals at the plant sites. It has been efficient for creating plant scene by using 3D-CAD from the viewpoint of cost, and stereographic has been much attractive to the resident. The detail scenario must be investigated from the viewpoint of PA effect. Also the performance of the graphics workstation should be increased to promote the quality of the CG movie. But we think that this system will have much effective by its novelty and flexibility. (author)

New trends in applied harmonic analysis sparse representations, compressed sensing, and multifractal analysis

CERN Document Server

Cabrelli, Carlos; Jaffard, Stephane; Molter, Ursula

2016-01-01

This volume is a selection of written notes corresponding to courses taught at the CIMPA School: "New Trends in Applied Harmonic Analysis: Sparse Representations, Compressed Sensing and Multifractal Analysis". New interactions between harmonic analysis and signal and image processing have seen striking development in the last 10 years, and several technological deadlocks have been solved through the resolution of deep theoretical problems in harmonic analysis. New Trends in Applied Harmonic Analysis focuses on two particularly active areas that are representative of such advances: multifractal analysis, and sparse representation and compressed sensing. The contributions are written by leaders in these areas, and covers both theoretical aspects and applications. This work should prove useful not only to PhD students and postdocs in mathematics and signal and image processing, but also to researchers working in related topics.

Integrative Systems Biology Applied to Toxicology

DEFF Research Database (Denmark)

Kongsbak, Kristine Grønning

associated with combined exposure to multiple chemicals. Testing all possible combinations of the tens of thousands environmental chemicals is impractical. This PhD project was launched to apply existing computational systems biology methods to toxicological research. In this thesis, I present in three...... of a system thereby suggesting new ways of thinking specific toxicological endpoints. Furthermore, computational methods can serve as valuable input for the hypothesis generating phase of the preparations of a research project....

Performance estimation of Tesla turbine applied in small scale Organic Rankine Cycle (ORC) system

International Nuclear Information System (INIS)

Song, Jian; Gu, Chun-wei; Li, Xue-song

2017-01-01

Highlights: • One-dimensional model of the Tesla turbine is improved and applied in ORC system. • Working fluid properties and system operating conditions impact efficiency. • The influence of turbine efficiency on ORC system performance is evaluated. • Potential of using Tesla turbine in ORC systems is estimated. - Abstract: Organic Rankine Cycle (ORC) system has been proven to be an effective method for the low grade energy utilization. In small scale applications, the Tesla turbine offers an attractive option for the organic expander if an efficient design can be achieved. The Tesla turbine is simple in structure and is easy to be manufactured. This paper improves the one-dimensional model for the Tesla turbine, which adopts a non-dimensional formulation that identifies the dimensionless parameters that dictates the performance features of the turbine. The model is used to predict the efficiency of a Tesla turbine that is applied in a small scale ORC system. The influence of the working fluid properties and the operating conditions on the turbine performance is evaluated. Thermodynamic analysis of the ORC system with different organic working fluids and under various operating conditions is conducted. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, the Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

Applied dynamics

CERN Document Server

Schiehlen, Werner

2014-01-01

Applied Dynamics is an important branch of engineering mechanics widely applied to mechanical and automotive engineering, aerospace and biomechanics as well as control engineering and mechatronics. The computational methods presented are based on common fundamentals. For this purpose analytical mechanics turns out to be very useful where D’Alembert’s principle in the Lagrangian formulation proves to be most efficient. The method of multibody systems, finite element systems and continuous systems are treated consistently. Thus, students get a much better understanding of dynamical phenomena, and engineers in design and development departments using computer codes may check the results more easily by choosing models of different complexity for vibration and stress analysis.

Sandia Laboratories technical capabilities: systems analysis

International Nuclear Information System (INIS)

Lundergan, C.D.

1975-06-01

The systems analysis capabilities at Sandia Laboratories are summarized. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs. (U.S.)

Genetic algorithm applied to a Soil-Vegetation-Atmosphere system: Sensitivity and uncertainty analysis

Science.gov (United States)

Schneider, Sébastien; Jacques, Diederik; Mallants, Dirk

2010-05-01

Numerical models are of precious help for predicting water fluxes in the vadose zone and more specifically in Soil-Vegetation-Atmosphere (SVA) systems. For such simulations, robust models and representative soil hydraulic parameters are required. Calibration of unsaturated hydraulic properties is known to be a difficult optimization problem due to the high non-linearity of the water flow equations. Therefore, robust methods are needed to avoid the optimization process to lead to non-optimal parameters. Evolutionary algorithms and specifically genetic algorithms (GAs) are very well suited for those complex parameter optimization problems. Additionally, GAs offer the opportunity to assess the confidence in the hydraulic parameter estimations, because of the large number of model realizations. The SVA system in this study concerns a pine stand on a heterogeneous sandy soil (podzol) in the Campine region in the north of Belgium. Throughfall and other meteorological data and water contents at different soil depths have been recorded during one year at a daily time step in two lysimeters. The water table level, which is varying between 95 and 170 cm, has been recorded with intervals of 0.5 hour. The leaf area index was measured as well at some selected time moments during the year in order to evaluate the energy which reaches the soil and to deduce the potential evaporation. Water contents at several depths have been recorded. Based on the profile description, five soil layers have been distinguished in the podzol. Two models have been used for simulating water fluxes: (i) a mechanistic model, the HYDRUS-1D model, which solves the Richards' equation, and (ii) a compartmental model, which treats the soil profile as a bucket into which water flows until its maximum capacity is reached. A global sensitivity analysis (Morris' one-at-a-time sensitivity analysis) was run previously to the calibration, in order to check the sensitivity in the chosen parameter search space. For

Benefit analysis of proposed information systems

OpenAIRE

Besore, Mark H.

1991-01-01

Approved for public release; distribution is unlimited This thesis reviewed two different approaches to benefit analysis, benefit comparison and user satisfaction, that could be applied to the evaluation of proposed information systems which are under consideration for acquisition by the federal government. Currently the General Services Administration only recommends that present value analysis methods be used in the analysis of alternatives even though the GSA specifies...

Power system reliability analysis using fault trees

International Nuclear Information System (INIS)

Volkanovski, A.; Cepin, M.; Mavko, B.

2006-01-01

The power system reliability analysis method is developed from the aspect of reliable delivery of electrical energy to customers. The method is developed based on the fault tree analysis, which is widely applied in the Probabilistic Safety Assessment (PSA). The method is adapted for the power system reliability analysis. The method is developed in a way that only the basic reliability parameters of the analysed power system are necessary as an input for the calculation of reliability indices of the system. The modeling and analysis was performed on an example power system consisting of eight substations. The results include the level of reliability of current power system configuration, the combinations of component failures resulting in a failed power delivery to loads, and the importance factors for components and subsystems. (author)

Applied research of environmental monitoring using instrumental neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Young Sam; Moon, Jong Hwa; Chung, Young Ju

1997-08-01

This technical report is written as a guide book for applied research of environmental monitoring using Instrumental Neutron Activation Analysis. The contents are as followings; sampling and sample preparation as a airborne particulate matter, analytical methodologies, data evaluation and interpretation, basic statistical methods of data analysis applied in environmental pollution studies. (author). 23 refs., 7 tabs., 9 figs.

Multi-Disciplinary System Reliability Analysis

Science.gov (United States)

Mahadevan, Sankaran; Han, Song

1997-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Sensitivity analysis and optimization of system dynamics models : Regression analysis and statistical design of experiments

NARCIS (Netherlands)

Kleijnen, J.P.C.

1995-01-01

This tutorial discusses what-if analysis and optimization of System Dynamics models. These problems are solved, using the statistical techniques of regression analysis and design of experiments (DOE). These issues are illustrated by applying the statistical techniques to a System Dynamics model for

Feasibility study of applying a multi-channel analysis model to on-line core monitoring system

International Nuclear Information System (INIS)

In, W. K.; Yoo, Y. J.; Hwang, D. H.; Jun, T. H.

1998-01-01

A feasibility study was performed to evaluate the effect of implementing a multi-channel analysis model in on-line core monitoring system. A simplified thermal-hydraulic model has been used in the on-line core monitoring system of digital PWR. The design procedure, core thermal margin and computation time were investigated in case of replacing the simplified model with the multi-channel analysis model. For the given ranges of limiting conditions for operation in Yonggwang Unit 3 Cycle 1, the minimum DNBR of the simplified thermal-hydraulic code CETOP-D was compared to that of the multi-channel analysis code MATRA. A CETOP-D tuning is additionally required to ensure the accurate and conservative DNBR calculation but the MATRA tuning is not necessary. MATRA appeared to increase the DNBR overpower margin from 2.5% to 6% over the CETOP-D margin. MATRA took approximately 1 second to compute DNBR on the HP9000 workstation system, which is longer than the DNBR computation time of CETOP-D. It is, however, fast enough to perform the on-line monitoring of DNBR. It can be therefore concluded that the application of the multi-channel analysis model MATRA in the on-line core monitoring system is feasible

The Significance of Regional Analysis in Applied Geography.

Science.gov (United States)

Sommers, Lawrence M.

Regional analysis is central to applied geographic research, contributing to better planning and policy development for a variety of societal problems facing the United States. The development of energy policy serves as an illustration of the capabilities of this type of analysis. The United States has had little success in formulating a national…

Supply risk analysis: applying system dynamics to the Colombian healthcare sector

Directory of Open Access Journals (Sweden)

Juan Pablo Zamora Aguas

2013-09-01

Full Text Available This paper addresses supply risk in the oncological medicine supply chain (SC in Colombia. A system dynamics model was developed for assessing supply risk impact on SC operation and performance. The costs of risk and logis-tics operation were evaluated in current conditions and in a risk mitigation scenario. The model was based on a systematic analysis of supply networks, mainly concerning the reduction of overall SC costs and improving service, quality and opportunity performance index. This article has resulted from research into SC risk management (SCRM carried out by the Universidad Nacional de Colombia’s SEPRO research group.

Radiographic enhancement and analysis system

International Nuclear Information System (INIS)

Schlosser, M.S.

1981-01-01

Radiographic image enhancement and analysis techniques are discussed as they apply to nondestructive inspection. A system is described which has been developed to enhance and quantitatively evaluate radiographic images using digital computer techniques. Some examples of typical applications are also presented as an introduction to this new inspection technique. (author)

Can Link Analysis Be Applied to Identify Behavioral Patterns in Train Recorder Data?

Science.gov (United States)

Strathie, Ailsa; Walker, Guy H

2016-03-01

A proof-of-concept analysis was conducted to establish whether link analysis could be applied to data from on-train recorders to detect patterns of behavior that could act as leading indicators of potential safety issues. On-train data recorders capture data about driving behavior on thousands of routine journeys every day and offer a source of untapped data that could be used to offer insights into human behavior. Data from 17 journeys undertaken by six drivers on the same route over a 16-hr period were analyzed using link analysis, and four key metrics were examined: number of links, network density, diameter, and sociometric status. The results established that link analysis can be usefully applied to data captured from on-vehicle recorders. The four metrics revealed key differences in normal driver behavior. These differences have promising construct validity as leading indicators. Link analysis is one method that could be usefully applied to exploit data routinely gathered by on-vehicle data recorders. It facilitates a proactive approach to safety based on leading indicators, offers a clearer understanding of what constitutes normal driving behavior, and identifies trends at the interface of people and systems, which is currently a key area of strategic risk. These research findings have direct applications in the field of transport data monitoring. They offer a means of automatically detecting patterns in driver behavior that could act as leading indicators of problems during operation and that could be used in the proactive monitoring of driver competence, risk management, and even infrastructure design. © 2015, Human Factors and Ergonomics Society.

Animal Research in the "Journal of Applied Behavior Analysis"

Science.gov (United States)

Edwards, Timothy L.; Poling, Alan

2011-01-01

This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the "Journal of Applied Behavior Analysis" and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance…

Reliability analysis of reactor systems by applying probability method; Analiza pouzdanosti reaktorskih sistema primenom metoda verovatnoce

Energy Technology Data Exchange (ETDEWEB)

Milivojevic, S [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1974-12-15

Probability method was chosen for analysing the reactor system reliability is considered realistic since it is based on verified experimental data. In fact this is a statistical method. The probability method developed takes into account the probability distribution of permitted levels of relevant parameters and their particular influence on the reliability of the system as a whole. The proposed method is rather general, and was used for problem of thermal safety analysis of reactor system. This analysis enables to analyze basic properties of the system under different operation conditions, expressed in form of probability they show the reliability of the system on the whole as well as reliability of each component.

Reliability analysis of digital based I and C system

Energy Technology Data Exchange (ETDEWEB)

Kang, I. S.; Cho, B. S.; Choi, M. J. [KOPEC, Yongin (Korea, Republic of)

1999-10-01

Rapidly, digital technology is being widely applied in replacing analog component installed in existing plant and designing new nuclear power plant for control and monitoring system in Korea as well as in foreign countries. Even though many merits of digital technology, it is being faced with a new problem of reliability assurance. The studies for solving this problem are being performed vigorously in foreign countries. The reliability of KNGR Engineered Safety Features Component Control System (ESF-CCS), digital based I and C system, was analyzed to verify fulfillment of the ALWR EPRI-URD requirement for reliability analysis and eliminate hazards in design applied new technology. The qualitative analysis using FMEA and quantitative analysis using reliability block diagram were performed. The results of analyses are shown in this paper.

Modern problems in applied analysis

CERN Document Server

Rogosin, Sergei

2018-01-01

This book features a collection of recent findings in Applied Real and Complex Analysis that were presented at the 3rd International Conference “Boundary Value Problems, Functional Equations and Applications” (BAF-3), held in Rzeszow, Poland on 20-23 April 2016. The contributions presented here develop a technique related to the scope of the workshop and touching on the fields of differential and functional equations, complex and real analysis, with a special emphasis on topics related to boundary value problems. Further, the papers discuss various applications of the technique, mainly in solid mechanics (crack propagation, conductivity of composite materials), biomechanics (viscoelastic behavior of the periodontal ligament, modeling of swarms) and fluid dynamics (Stokes and Brinkman type flows, Hele-Shaw type flows). The book is addressed to all readers who are interested in the development and application of innovative research results that can help solve theoretical and real-world problems.

Identifying a cooperative control mechanism between an applied field and the environment of open quantum systems

Science.gov (United States)

Gao, Fang; Rey-de-Castro, Roberto; Wang, Yaoxiong; Rabitz, Herschel; Shuang, Feng

2016-05-01

Many systems under control with an applied field also interact with the surrounding environment. Understanding the control mechanisms has remained a challenge, especially the role played by the interaction between the field and the environment. In order to address this need, here we expand the scope of the Hamiltonian-encoding and observable-decoding (HE-OD) technique. HE-OD was originally introduced as a theoretical and experimental tool for revealing the mechanism induced by control fields in closed quantum systems. The results of open-system HE-OD analysis presented here provide quantitative mechanistic insights into the roles played by a Markovian environment. Two model open quantum systems are considered for illustration. In these systems, transitions are induced by either an applied field linked to a dipole operator or Lindblad operators coupled to the system. For modest control yields, the HE-OD results clearly show distinct cooperation between the dynamics induced by the optimal field and the environment. Although the HE-OD methodology introduced here is considered in simulations, it has an analogous direct experimental formulation, which we suggest may be applied to open systems in the laboratory to reveal mechanistic insights.

Integrated tools for control-system analysis

Science.gov (United States)

Ostroff, Aaron J.; Proffitt, Melissa S.; Clark, David R.

1989-01-01

The basic functions embedded within a user friendly software package (MATRIXx) are used to provide a high level systems approach to the analysis of linear control systems. Various control system analysis configurations are assembled automatically to minimize the amount of work by the user. Interactive decision making is incorporated via menu options and at selected points, such as in the plotting section, by inputting data. There are five evaluations such as the singular value robustness test, singular value loop transfer frequency response, Bode frequency response, steady-state covariance analysis, and closed-loop eigenvalues. Another section describes time response simulations. A time response for random white noise disturbance is available. The configurations and key equations used for each type of analysis, the restrictions that apply, the type of data required, and an example problem are described. One approach for integrating the design and analysis tools is also presented.

Fourier convergence analysis applied to neutron diffusion Eigenvalue problem

International Nuclear Information System (INIS)

Lee, Hyun Chul; Noh, Jae Man; Joo, Hyung Kook

2004-01-01

Fourier error analysis has been a standard technique for the stability and convergence analysis of linear and nonlinear iterative methods. Though the methods can be applied to Eigenvalue problems too, all the Fourier convergence analyses have been performed only for fixed source problems and a Fourier convergence analysis for Eigenvalue problem has never been reported. Lee et al proposed new 2-D/1-D coupling methods and they showed that the new ones are unconditionally stable while one of the two existing ones is unstable at a small mesh size and that the new ones are better than the existing ones in terms of the convergence rate. In this paper the convergence of method A in reference 4 for the diffusion Eigenvalue problem was analyzed by the Fourier analysis. The Fourier convergence analysis presented in this paper is the first one applied to a neutronics eigenvalue problem to the best of our knowledge

Modeling and Controlling Flow Transient in Pipeline Systems: Applied for Reservoir and Pump Systems Combined with Simple Surge Tank

Directory of Open Access Journals (Sweden)

Itissam ABUIZIAH

2014-03-01

Full Text Available When transient conditions (water hammer exist, the life expectancy of the system can be adversely impacted, resulting in pump and valve failures and catastrophic pipe rupture. Hence, transient control has become an essential requirement for ensuring safe operation of water pipeline systems. To protect the pipeline systems from transient effects, an accurate analysis and suitable protection devices should be used. This paper presents the problem of modeling and simulation of transient phenomena in hydraulic systems based on the characteristics method. Also, it provides the influence of using the protection devices to control the adverse effects due to excessive and low pressure occuring in the transient. We applied this model for two main pipeline systems: Valve and pump combined with a simple surge tank connected to reservoir. The results obtained by using this model indicate that the model is an efficient tool for water hammer analysis. Moreover, using a simple surge tank reduces the unfavorable effects of transients by reducing pressure fluctuations.

Advances in analysis and control of timedelayed dynamical systems

CERN Document Server

Sun, Jianqiao

2013-01-01

Analysis and control of timedelayed systems have been applied in a wide range of applications, ranging from mechanical, control, economic, to biological systems. Over the years, there has been a steady stream of interest in timedelayed dynamic systems, this book takes a snap shot of recent research from the world leading experts in analysis and control of dynamic systems with time delay to provide a bird's eye view of its development. The topics covered in this book include solution methods, stability analysis and control of periodic dynamic systems with time delay, bifurcations, stochastic dy

Applied Information Systems Research Program Workshop

Science.gov (United States)

1991-01-01

The first Applied Information Systems Research Program (AISRP) Workshop provided the impetus for several groups involved in information systems to review current activities. The objectives of the workshop included: (1) to provide an open forum for interaction and discussion of information systems; (2) to promote understanding by initiating a dialogue with the intended benefactors of the program, the scientific user community, and discuss options for improving their support; (3) create an advocacy in having science users and investigators of the program meet together and establish the basis for direction and growth; and (4) support the future of the program by building collaborations and interaction to encourage an investigator working group approach for conducting the program.

Response Time Analysis of Distributed Web Systems Using QPNs

Directory of Open Access Journals (Sweden)

Tomasz Rak

2015-01-01

Full Text Available A performance model is used for studying distributed Web systems. Performance evaluation is done by obtaining load test measurements. Queueing Petri Nets formalism supports modeling and performance analysis of distributed World Wide Web environments. The proposed distributed Web systems modeling and design methodology have been applied in the evaluation of several system architectures under different external loads. Furthermore, performance analysis is done to determine the system response time.

Matrix converter applied to energy saving for street lighting systems

OpenAIRE

Román Lumbreras, Manuel; Velasco Quesada, Guillermo; Conesa Roca, Alfons

2010-01-01

This work presents a three-phase AC-AC converter, with independent phase control, based on matrix-converter structure. This converter is applied to electrical energy saving on the public lighting systems by means of regulation and control of the voltage applied to the lamps. The developed converter represents a technological improvement with respect to the traditional systems based on an autotransformer: it reduces system cost and volume, and increases lamps lifetime.

Simulating Nationwide Pandemics: Applying the Multi-scale Epidemiologic Simulation and Analysis System to Human Infectious Diseases

Energy Technology Data Exchange (ETDEWEB)

Dombroski, M; Melius, C; Edmunds, T; Banks, L E; Bates, T; Wheeler, R

2008-09-24

This study uses the Multi-scale Epidemiologic Simulation and Analysis (MESA) system developed for foreign animal diseases to assess consequences of nationwide human infectious disease outbreaks. A literature review identified the state of the art in both small-scale regional models and large-scale nationwide models and characterized key aspects of a nationwide epidemiological model. The MESA system offers computational advantages over existing epidemiological models and enables a broader array of stochastic analyses of model runs to be conducted because of those computational advantages. However, it has only been demonstrated on foreign animal diseases. This paper applied the MESA modeling methodology to human epidemiology. The methodology divided 2000 US Census data at the census tract level into school-bound children, work-bound workers, elderly, and stay at home individuals. The model simulated mixing among these groups by incorporating schools, workplaces, households, and long-distance travel via airports. A baseline scenario with fixed input parameters was run for a nationwide influenza outbreak using relatively simple social distancing countermeasures. Analysis from the baseline scenario showed one of three possible results: (1) the outbreak burned itself out before it had a chance to spread regionally, (2) the outbreak spread regionally and lasted a relatively long time, although constrained geography enabled it to eventually be contained without affecting a disproportionately large number of people, or (3) the outbreak spread through air travel and lasted a long time with unconstrained geography, becoming a nationwide pandemic. These results are consistent with empirical influenza outbreak data. The results showed that simply scaling up a regional small-scale model is unlikely to account for all the complex variables and their interactions involved in a nationwide outbreak. There are several limitations of the methodology that should be explored in future

Animal research in the Journal of Applied Behavior Analysis.

Science.gov (United States)

Edwards, Timothy L; Poling, Alan

2011-01-01

This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the Journal of Applied Behavior Analysis and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance (say-do correspondence and fluency), 3 described interventions that changed animals' behavior (self-injury by a baboon, feces throwing and spitting by a chimpanzee, and unsafe trailer entry by horses) in ways that benefited the animals and the people in charge of them, and 1 described the use of trained rats that performed a service to humans (land-mine detection). We suggest that each of these general research areas merits further attention and that the Journal of Applied Behavior Analysis is an appropriate outlet for some of these publications.

Space elevator systems level analysis

Energy Technology Data Exchange (ETDEWEB)

Laubscher, B. E. (Bryan E.)

2004-01-01

The Space Elevator (SE) represents a major paradigm shift in space access. It involves new, untried technologies in most of its subsystems. Thus the successful construction of the SE requires a significant amount of development, This in turn implies a high level of risk for the SE. This paper will present a systems level analysis of the SE by subdividing its components into their subsystems to determine their level of technological maturity. such a high-risk endeavor is to follow a disciplined approach to the challenges. A systems level analysis informs this process and is the guide to where resources should be applied in the development processes. It is an efficient path that, if followed, minimizes the overall risk of the system's development. systems level analysis is that the overall system is divided naturally into its subsystems, and those subsystems are further subdivided as appropriate for the analysis. By dealing with the complex system in layers, the parameter space of decisions is kept manageable. Moreover, A rational way to manage One key aspect of a resources are not expended capriciously; rather, resources are put toward the biggest challenges and most promising solutions. This overall graded approach is a proven road to success. The analysis includes topics such as nanotube technology, deployment scenario, power beaming technology, ground-based hardware and operations, ribbon maintenance and repair and climber technology.

DESCRIBING FUNCTION METHOD FOR PI-FUZZY CONTROLLED SYSTEMS STABILITY ANALYSIS

Directory of Open Access Journals (Sweden)

Stefan PREITL

2004-12-01

Full Text Available The paper proposes a global stability analysis method dedicated to fuzzy control systems containing Mamdani PI-fuzzy controllers with output integration to control SISO linear / linearized plants. The method is expressed in terms of relatively simple steps, and it is based on: the generalization of the describing function method for the considered fuzzy control systems to the MIMO case, the approximation of the describing functions by applying the least squares method. The method is applied to the stability analysis of a class of PI-fuzzy controlled servo-systems, and validated by considering a case study.

Study of applying a hybrid standalone wind-photovoltaic generation system

Directory of Open Access Journals (Sweden)

Aissa Dahmani

2015-01-01

Full Text Available The purpose of this paper is the study of applying a hybrid system wind/photovoltaic to supply a community in southern Algeria. Diesel generators are always used to provide such remote regions with energy. Using renewable energy resources is a good alternative to overcome such pollutant generators. Hybrid Optimization Model for Electric Renewable (HOMER software is used to determine the economic feasibility of the proposed configuration. Assessment of renewable resources consisting in wind and solar potentials, load profile determination and sensitivity of different parameters analysis were performed. The cost of energy (COE of 0.226 $/kWh is very competitive with those found in literature.

[Digital learning object for diagnostic reasoning in nursing applied to the integumentary system].

Science.gov (United States)

da Costa, Cecília Passos Vaz; Luz, Maria Helena Barros Araújo

2015-12-01

To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

[Model-based biofuels system analysis: a review].

Science.gov (United States)

Chang, Shiyan; Zhang, Xiliang; Zhao, Lili; Ou, Xunmin

2011-03-01

Model-based system analysis is an important tool for evaluating the potential and impacts of biofuels, and for drafting biofuels technology roadmaps and targets. The broad reach of the biofuels supply chain requires that biofuels system analyses span a range of disciplines, including agriculture/forestry, energy, economics, and the environment. Here we reviewed various models developed for or applied to modeling biofuels, and presented a critical analysis of Agriculture/Forestry System Models, Energy System Models, Integrated Assessment Models, Micro-level Cost, Energy and Emission Calculation Models, and Specific Macro-level Biofuel Models. We focused on the models' strengths, weaknesses, and applicability, facilitating the selection of a suitable type of model for specific issues. Such an analysis was a prerequisite for future biofuels system modeling, and represented a valuable resource for researchers and policy makers.

Discrete event simulation versus conventional system reliability analysis approaches

DEFF Research Database (Denmark)

Kozine, Igor

2010-01-01

Discrete Event Simulation (DES) environments are rapidly developing and appear to be promising tools for building reliability and risk analysis models of safety-critical systems and human operators. If properly developed, they are an alternative to the conventional human reliability analysis models...... and systems analysis methods such as fault and event trees and Bayesian networks. As one part, the paper describes briefly the author’s experience in applying DES models to the analysis of safety-critical systems in different domains. The other part of the paper is devoted to comparing conventional approaches...

Analysis of interconnecting energy systems over a synchronized life cycle

International Nuclear Information System (INIS)

Nian, Victor

2016-01-01

Highlights: • A methodology is developed for evaluating a life cycle of interconnected systems. • A new concept of partial temporal boundary is introduced via quantitative formulation. • The interconnecting systems are synchronized through the partial temporal boundary. • A case study on the life cycle of the coal–uranium system is developed. - Abstract: Life cycle analysis (LCA) using the process chain analysis (PCA) approach has been widely applied to energy systems. When applied to an individual energy system, such as coal or nuclear electricity generation, an LCA–PCA methodology can yield relatively accurate results with its detailed process representation based on engineering data. However, there are fundamental issues when applying conventional LCA–PCA methodology to a more complex life cycle, namely, a synchronized life cycle of interconnected energy systems. A synchronized life cycle of interconnected energy systems is established through direct interconnections among the processes of different energy systems, and all interconnecting systems are bounded within the same timeframe. Under such a life cycle formation, there are some major complications when applying conventional LCA–PCA methodology to evaluate the interconnecting energy systems. Essentially, the conventional system and boundary formulations developed for a life cycle of individual energy system cannot be directly applied to a life cycle of interconnected energy systems. To address these inherent issues, a new LCA–PCA methodology is presented in this paper, in which a new concept of partial temporal boundary is introduced to synchronize the interconnecting energy systems. The importance and advantages of these new developments are demonstrated through a case study on the life cycle of the coal–uranium system.

Applied Behavior Analysis: Beyond Discrete Trial Teaching

Science.gov (United States)

Steege, Mark W.; Mace, F. Charles; Perry, Lora; Longenecker, Harold

2007-01-01

We discuss the problem of autism-specific special education programs representing themselves as Applied Behavior Analysis (ABA) programs when the only ABA intervention employed is Discrete Trial Teaching (DTT), and often for limited portions of the school day. Although DTT has many advantages to recommend its use, it is not well suited to teach…

Applying Product Configuration Systems in Engineering Companies

DEFF Research Database (Denmark)

Ladeby, Klaes Rohde

This Ph.D. thesis looks into the application of configuration systems in engineering companies, and how configuration systems can be used to support business processes in engineering companies. Often the motivation stated by researchers and practitioners is, that a configuration project...... and sustain competitive advantage” (Teece, Pisano, & Shuen, 1997, pp.509) This question has puzzled academics and preoccupied managers for the last century. Yet, it seems there is still no consensus regarding the meaning of strategy, and how strategy works. Type in the word “strategy” on Amazon.co.uk and 76......,133 books apply. Type it in on Google scholar and 8,580,000 homepages apply3. Obviously, strategy is an important subject. However, the subject also seems to be difficult to perceive. Although this thesis is not about strategy, or strategizing, I would like to pursue the definition of strategy one step...

NUMERICAL THERMAL ANALYSIS OF A CAR BRAKING SYSTEM

Directory of Open Access Journals (Sweden)

Patryk Różyło

2017-06-01

Full Text Available The study involved performing a numerical thermal analysis of selected components in a car braking system. The primary goal of the study was to determine the regions which are the most susceptible to variations in temperature, and to determine the degree of thermal impact upon them. The analysis was performed using the Abaqus environment. The examined components of the braking system were made of materials reflecting the mechanical properties of the real subassemblies. The FEM analysis enabled determination of the distribution of temperature in the system with respect to the properties of the investigated materials and applied boundary conditions.

Positive Behavior Support and Applied Behavior Analysis

Science.gov (United States)

Johnston, J. M.; Foxx, R. M.; Jacobson, J. W.; Green, G.; Mulick, J. A.

2006-01-01

This article reviews the origins and characteristics of the positive behavior support (PBS) movement and examines those features in the context of the field of applied behavior analysis (ABA). We raise a number of concerns about PBS as an approach to delivery of behavioral services and its impact on how ABA is viewed by those in human services. We…

Progressive-Ratio Schedules and Applied Behavior Analysis

Science.gov (United States)

Poling, Alan

2010-01-01

Establishing appropriate relations between the basic and applied areas of behavior analysis has been of long and persistent interest to the author. In this article, the author illustrates that there is a direct relation between how hard an organism will work for access to an object or activity, as indexed by the largest ratio completed under a…

Operationalizing sustainability in urban coastal systems: a system dynamics analysis.

Science.gov (United States)

Mavrommati, Georgia; Bithas, Kostas; Panayiotidis, Panayiotis

2013-12-15

We propose a system dynamics approach for Ecologically Sustainable Development (ESD) in urban coastal systems. A systematic analysis based on theoretical considerations, policy analysis and experts' knowledge is followed in order to define the concept of ESD. The principles underlying ESD feed the development of a System Dynamics Model (SDM) that connects the pollutant loads produced by urban systems' socioeconomic activities with the ecological condition of the coastal ecosystem that it is delineated in operational terms through key biological elements defined by the EU Water Framework Directive. The receiving waters of the Athens Metropolitan area, which bears the elements of typical high population density Mediterranean coastal city but which currently has also new dynamics induced by the ongoing financial crisis, are used as an experimental system for testing a system dynamics approach to apply the concept of ESD. Systems' thinking is employed to represent the complex relationships among the components of the system. Interconnections and dependencies that determine the potentials for achieving ESD are revealed. The proposed system dynamics analysis can facilitate decision makers to define paths of development that comply with the principles of ESD. Copyright © 2013 Elsevier Ltd. All rights reserved.

Strategic decision analysis applied to borehole seismology

International Nuclear Information System (INIS)

Menke, M.M.; Paulsson, B.N.P.

1994-01-01

Strategic Decision Analysis (SDA) is the evolving body of knowledge on how to achieve high quality in the decision that shapes an organization's future. SDA comprises philosophy, process concepts, methodology, and tools for making good decisions. It specifically incorporates many concepts and tools from economic evaluation and risk analysis. Chevron Petroleum Technology Company (CPTC) has applied SDA to evaluate and prioritize a number of its most important and most uncertain R and D projects, including borehole seismology. Before SDA, there were significant issues and concerns about the value to CPTC of continuing to work on borehole seismology. The SDA process created a cross-functional team of experts to structure and evaluate this project. A credible economic model was developed, discrete risks and continuous uncertainties were assessed, and an extensive sensitivity analysis was performed. The results, even applied to a very restricted drilling program for a few years, were good enough to demonstrate the value of continuing the project. This paper explains the SDA philosophy concepts, and process and demonstrates the methodology and tools using the borehole seismology project example. SDA is useful in the upstream industry not just in the R and D/technology decisions, but also in major exploration and production decisions. Since a major challenge for upstream companies today is to create and realize value, the SDA approach should have a very broad applicability

Digital learning object for diagnostic reasoning in nursing applied to the integumentary system

Directory of Open Access Journals (Sweden)

Cecília Passos Vaz da Costa

Full Text Available Objective: To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. Method: A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. Results: The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. Conclusion: This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

A practical guide to propensity score analysis for applied clinical research.

Science.gov (United States)

Lee, Jaehoon; Little, Todd D

2017-11-01

Observational studies are often the only viable options in many clinical settings, especially when it is unethical or infeasible to randomly assign participants to different treatment régimes. In such case propensity score (PS) analysis can be applied to accounting for possible selection bias and thereby addressing questions of causal inference. Many PS methods exist, yet few guidelines are available to aid applied researchers in their conduct and evaluation of a PS analysis. In this article we give an overview of available techniques for PS estimation and application, balance diagnostic, treatment effect estimation, and sensitivity assessment, as well as recent advances. We also offer a tutorial that can be used to emulate the steps of PS analysis. Our goal is to provide information that will bring PS analysis within the reach of applied clinical researchers and practitioners. Copyright © 2017 Elsevier Ltd. All rights reserved.

Solving system of DAEs by homotopy analysis method

International Nuclear Information System (INIS)

Awawdeh, Fadi; Jaradat, H.M.; Alsayyed, O.

2009-01-01

Homotopy analysis method (HAM) is applied to systems of differential-algebraic equations (DAEs). The HAM is proved to be very effective, simple and convenient to give approximate analytical solutions to DAEs.

An Inverse Kinematic Approach Using Groebner Basis Theory Applied to Gait Cycle Analysis

Science.gov (United States)

2013-03-01

AN INVERSE KINEMATIC APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS THESIS Anum Barki AFIT-ENP-13-M-02 DEPARTMENT OF THE AIR...copyright protection in the United States. AFIT-ENP-13-M-02 AN INVERSE KINEMATIC APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS THESIS...APPROACH USING GROEBNER BASIS THEORY APPLIED TO GAIT CYCLE ANALYSIS Anum Barki, BS Approved: Dr. Ronald F. Tuttle (Chairman) Date Dr. Kimberly Kendricks

Applied spectrophotometry: analysis of a biochemical mixture.

Science.gov (United States)

Trumbo, Toni A; Schultz, Emeric; Borland, Michael G; Pugh, Michael Eugene

2013-01-01

Spectrophotometric analysis is essential for determining biomolecule concentration of a solution and is employed ubiquitously in biochemistry and molecular biology. The application of the Beer-Lambert-Bouguer Lawis routinely used to determine the concentration of DNA, RNA or protein. There is however a significant difference in determining the concentration of a given species (RNA, DNA, protein) in isolation (a contrived circumstance) as opposed to determining that concentration in the presence of other species (a more realistic situation). To present the student with a more realistic laboratory experience and also to fill a hole that we believe exists in student experience prior to reaching a biochemistry course, we have devised a three week laboratory experience designed so that students learn to: connect laboratory practice with theory, apply the Beer-Lambert-Bougert Law to biochemical analyses, demonstrate the utility and limitations of example quantitative colorimetric assays, demonstrate the utility and limitations of UV analyses for biomolecules, develop strategies for analysis of a solution of unknown biomolecular composition, use digital micropipettors to make accurate and precise measurements, and apply graphing software. Copyright © 2013 Wiley Periodicals, Inc.

Applied Drama and the Higher Education Learning Spaces: A Reflective Analysis

Science.gov (United States)

Moyo, Cletus

2015-01-01

This paper explores Applied Drama as a teaching approach in Higher Education learning spaces. The exploration takes a reflective analysis approach by first examining the impact that Applied Drama has had on my career as a Lecturer/Educator/Teacher working in Higher Education environments. My engagement with Applied Drama practice and theory is…

Kronecker Algebra-based Deadlock Analysis for Railway Systems

Directory of Open Access Journals (Sweden)

Robert Mittermayr

2012-09-01

Full Text Available Deadlock analysis for railway systems differs in several aspects from deadlock analysis in computer science. While the problem of deadlock analysis for standard computer systems is well-understood, multi-threaded embedded computer systems pose new challenges. A novel approach in this area can easily be applied to deadlock analysis in the domain of railway systems. The approach is based on Kronecker algebra. A lazy implementation of the matrix operations even allows analysing exponentially sized systems in a very efficient manner. The running time of the algorithm does not depend on the problem size but on the size of the solution. While other approaches suffer from the fact that additional constraints make the problem and its solution harder, our approach delivers its results faster if constraints are added. In addition, our approach is complete and sound for railway systems, i.e., it generates neither false positives nor false negatives.

Applying different quality and safety models in healthcare improvement work: Boundary objects and system thinking

International Nuclear Information System (INIS)

Wiig, Siri; Robert, Glenn; Anderson, Janet E.; Pietikainen, Elina; Reiman, Teemu; Macchi, Luigi; Aase, Karina

2014-01-01

A number of theoretical models can be applied to help guide quality improvement and patient safety interventions in hospitals. However there are often significant differences between such models and, therefore, their potential contribution when applied in diverse contexts. The aim of this paper is to explore how two such models have been applied by hospitals to improve quality and safety. We describe and compare the models: (1) The Organizing for Quality (OQ) model, and (2) the Design for Integrated Safety Culture (DISC) model. We analyze the theoretical foundations of the models, and show, by using a retrospective comparative case study approach from two European hospitals, how these models have been applied to improve quality and safety. The analysis shows that differences appear in the theoretical foundations, practical approaches and applications of the models. Nevertheless, the case studies indicate that the choice between the OQ and DISC models is of less importance for guiding the practice of quality and safety improvement work, as they are both systemic and share some important characteristics. The main contribution of the models lay in their role as boundary objects directing attention towards organizational and systems thinking, culture, and collaboration

Health policy, health systems research and analysis capacity ...

African Journals Online (AJOL)

Introduction: Health Policy and Systems Research and Analysis (HPSR&A) is an applied science that deals with complexity as it tries to provide lessons, tools and methods to understand and improve health systems and health policy. It is defined by the kinds of questions asked rather than a particular methodology.

Application of Functional Analysis on a SCADA System of a Thermal Power Plant

Directory of Open Access Journals (Sweden)

LAKHOUA, M. N.

2009-06-01

Full Text Available The aim of this paper is to present firstly the functionality of a supervisory system for complex processes, and secondly to present the concepts of SCADA (supervisory control and data acquisition systems. A functional analysis technique SADT (Structured Analysis and Design Technique has been applied on an example of a SCADA system of a thermal power plant. This technique allows a functional description of a SCADA system. The paper briefly discusses the functions of a SCADA system and some advantages of the application of functional analysis for the design of a human centered supervisory system. Then the basic principles of the SADT technique applied on the SCADA system are presented. Finally, the different results obtained from the SADT technique are discussed.

Application of Homotopy Analysis Method to Solve Relativistic Toda Lattice System

International Nuclear Information System (INIS)

Wang Qi

2010-01-01

In this letter, the homotopy analysis method is successfully applied to solve the Relativistic Toda lattice system. Comparisons are made between the results of the proposed method and exact solutions. Analysis results show that homotopy analysis method is a powerful and easy-to-use analytic tool to solve systems of differential-difference equations. (general)

Constraints to applying systems thinking concepts in health systems: A regional perspective from surveying stakeholders in Eastern Mediterranean countries.

Science.gov (United States)

El-Jardali, Fadi; Adam, Taghreed; Ataya, Nour; Jamal, Diana; Jaafar, Maha

2014-12-01

Systems Thinking (ST) has recently been promoted as an important approach to health systems strengthening. However, ST is not common practice, particularly in Low- and Middle-Income Countries (LMICs). This paper seeks to explore the barriers that may hinder its application in the Eastern Mediterranean Region (EMR) and possible strategies to mitigate them. A survey consisting of open-ended questions was conducted with a purposive sample of health policy-makers such as senior officials from the Ministry of Health (MoH), researchers, and other stakeholders such as civil society groups and professional associations from ten countries in the region. A total of 62 respondents participated in the study. Thematic analysis was conducted. There was strong recognition of the relevance and usefulness of ST to health systems policy-making and research, although misconceptions about what ST means were also identified. Experience with applying ST was very limited. Approaches to designing health policies in the EMR were perceived as reactive and fragmented (66%). Commonly perceived constraints to application of ST were: a perceived notion of its costliness combined with lack of the necessary funding to operationalize it (53%), competing political interests and lack of government accountability (50%), lack of awareness about relevance and value (47%), limited capacity to apply it (45%), and difficulty in coordinating and managing stakeholders (39%). While several strategies have been proposed to mitigate most of these constraints, they emphasized the importance of political endorsement and adoption of ST at the leadership level, together with building the necessary capacity to apply it and apply the learning in research and practice.

Measurement system analysis for one-sided tolerance

Directory of Open Access Journals (Sweden)

Szemik Kamil

2017-01-01

Full Text Available Measurement system analysis is carried out in order to determine if a capability to perform measurements in terms of product and process control is sufficient, indicating that the type I and the type II appraisal errors probability are acceptable. Statistical analyses for measurement system evaluation presented in the literature and the industrial manuals are not applicable for all complex and unusual applications. Therefore, the purpose of this study was to develop a robust statistical analysis method for measurement system variability analysis, in terms of product control scenario applied to one-sided tolerance. In the hereby presented study, the authors presented the theoretical principles of statistical techniques for measurement variations evaluation. Subsequently, the formula of gauge repeatability and reproducibility in terms of lower specification limit was proposed. The research hypothesis was tested using the statistical analysis.

Functional Data Analysis Applied in Chemometrics

DEFF Research Database (Denmark)

Muller, Martha

nutritional status and metabolic phenotype. We want to understand how metabolomic spectra can be analysed using functional data analysis to detect the in uence of dierent factors on specic metabolites. These factors can include, for example, gender, diet culture or dietary intervention. In Paper I we apply...... representation of each spectrum. Subset selection of wavelet coecients generates the input to mixed models. Mixed-model methodology enables us to take the study design into account while modelling covariates. Bootstrap-based inference preserves the correlation structure between curves and enables the estimation...

REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

International Nuclear Information System (INIS)

Markman, D.W.

1999-01-01

Preliminary design concepts for the proposed Subsurface Repository at Yucca Mountain indicate extensive reliance on modern, computer-based, digital control technologies. The purpose of this analysis is to investigate the degree to which the U. S. Nuclear Regulatory Commission (NRC) has accepted and approved the use of digital control technology for safety-related applications within the nuclear power industry. This analysis reviews cases of existing digitally-based control systems that have been approved by the NRC. These cases can serve as precedence for using similar types of digitally-based control technologies within the Subsurface Repository. While it is anticipated that the Yucca Mountain Project (YMP) will not contain control systems as complex as those required for a nuclear power plant, the review of these existing NRC approved applications will provide the YMP with valuable insight into the NRCs review process and design expectations for safety-related digital control systems. According to the YMP Compliance Program Guidance, portions of various NUREGS, Regulatory Guidelines, and nuclear IEEE standards the nuclear power plant safety related concept would be applied to some of the designs on a case-by-case basis. This analysis will consider key design methods, capabilities, successes, and important limitations or problems of selected control systems that have been approved for use in the Nuclear Power industry. An additional purpose of this analysis is to provide background information in support of further development of design criteria for the YMP. The scope and primary objectives of this analysis are to: (1) Identify and research the extent and precedence of digital control and remotely operated systems approved by the NRC for the nuclear power industry. Help provide a basis for using and relying on digital technologies for nuclear related safety critical applications. (2) Identify the basic control architecture and methods of key digital control

Security analysis of electronic voting and online banking systems

OpenAIRE

Tjøstheim, Thomas

2007-01-01

The main focus of this dissertation is on security analysis of electronic voting and online banking systems. Six papers form the basis of the thesis and include the following topics: a model for analysis of voting systems, a case study where we apply the proposed model, a new scheme for remote electronic voting, and three case studies of commercial online banking solutions in Norway.

The Applied Mathematics for Power Systems (AMPS)

Energy Technology Data Exchange (ETDEWEB)

Chertkov, Michael [Los Alamos National Laboratory

2012-07-24

Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

Establishment of Safety Analysis System and Technology for CANDU Reactors

International Nuclear Information System (INIS)

Min, Byung Joo; Kim, W. Y.; Kim, H. T.; Rhee, B. W.; Yoon, C.; Kang, H. S.; Yoo, K. J.

2005-03-01

To improve the CANDU design/operation safety analysis codes and the CANDU safety analysis methodology, the following works have been done. From the development of the lattice codes (WIMS/CANDU), the lattice model simulates the real core lattice geometry and the effect of the pressure tube creep to the core lattice parameter has been evaluated. From the development of the 3-dimensional thermal-hydraulic analysis model of the moderator behavior (CFX4-CAMO), validation of the model against STERN Lab experiment has been executed. The butterfly-shaped grid structure and the 3-dimensional flow resistance model for porous media were developed and applied to the moderator analysis for Wolsong units 2/3/4. The single fuel channel analysis codes for blowdown and post-blowdown were unified by CATHENA. The 3-dimensional fuel channel analysis model (CFX-CACH) has been developed for validation of CATHENA fuel channel analysis model. The interlinking analysis system (CANVAS) of the thermal-hydraulic safety analysis codes for the primary heat transport system and containment system has been executed. The database system of core physics and thermal-hydraulics experimental data for safety analysis has been established on the URL: http://CANTHIS.kaeri.re.kr. For documentation and Standardization of the general safety analysis procedure, the general safety analysis procedure is developed and applied to a large break LOCA. The present research results can be utilized for establishment of the independent safety analysis technology and acquisition of the optimal safety analysis technology

Characteristic analysis of the lower limb muscular strength training system applied with MR dampers.

Science.gov (United States)

Yu, Chang Ho; Piao, Young Jun; Kim, Kyung; Kwon, Tae Kyu

2014-01-01

A new training system that can adjust training intensity and indicate the center pressure of a subject was proposed by applying controlled electric current to the Magneto-Rheological damper. The experimental studying on the muscular activities were performed in lower extremities during maintaining and moving exercises, which were processed on an unstable platform with Magneto rheological dampers and recorded in a monitor. The electromyography (EMG) signals of the eight muscles in lower extremities were recorded and analyzed in certain time and frequency domain. Muscles researched in this paper were rectus femoris (RF), biceps femoris (BF), tensor fasciae latae (TFL), vastuslateralis (VL), vastusmedialis (VM), gastrocnemius (Ga), tibialis anterior (TA), and soleus (So). Differences of muscular activities during four moving exercises were studied in our experimental results. The rate of the increment of the muscular activities was affected by the condition of the unstable platform with MR dampers, which suggested the difference of moving exercises could selectively train each muscle with varying intensities. Furthermore, these findings also proposed that this training system can improve the ability of postural balance.

The Investigation of NPP Control and Monitoring Functional Analysis Applied to Functional Displays’ Implementation

International Nuclear Information System (INIS)

Yan, J.

2015-01-01

NPP Control and Monitoring System has been recognised as extreme and safe as well as large scale product, thus it was one of the most major design activities that fully, accurately and operationally functional analysis. The results of functional analysis would be employed as initial instruction through the whole lifecycle of NPP Control and Monitoring System. In this paper, it was discovered that several disadvantages of present functional analysis methods included FAST, The Subtract and Operate Procedure and Functional Procedure Method; owing to the identity methods enveloped here was the combination of Functional Tree and System Structure, as well as its decomposition steps; and RCS Inventory Control function which is defined as one of the most significant control functions in Advanced Light Water Reactor Utility Requirement Document has been employed to demonstrate the feasibility of this method; the analysis results of RCS Inventory function has been applied to direct the design and implementation of related displays, here the functional display of RCS Inventory Control function has been implemented on NuCON which is originated by SNPAS. Owing to the analyzing results, it would be ensured that the accuracy of information displayed to operators, thus the operator would be aware the condition of systems and then make the proper move to ensure the safety and productivity of NPP based on the received data. (author)

Applied Behavior Analysis: Current Myths in Public Education

Science.gov (United States)

Fielding, Cheryl; Lowdermilk, John; Lanier, Lauren L.; Fannin, Abigail G.; Schkade, Jennifer L.; Rose, Chad A.; Simpson, Cynthia G.

2013-01-01

The effective use of behavior management strategies and related policies continues to be a debated issue in public education. Despite overwhelming evidence espousing the benefits of the implementation of procedures derived from principles based on the science of applied behavior analysis (ABA), educators often indicate many common misconceptions…

Simplified seismic analysis applied to structures systems and components with limited radioactive inventories

International Nuclear Information System (INIS)

Stevenson, J.D.

1989-01-01

This paper presents a review of the current status of simplified methods of seismic design and analysis applicable to nuclear facility structures, systems and components important to public health and safety. In particular, the International Atomic Energy Agency, IAEA TEC DOC 348 procedure for structures and the Bounding Spectra Concept for equipment as being developed by Seismic Qualification Utility Group and the Electric Power Research Institute will be discussed in some detail

Applied statistical training to strengthen analysis and health research capacity in Rwanda.

Science.gov (United States)

Thomson, Dana R; Semakula, Muhammed; Hirschhorn, Lisa R; Murray, Megan; Ndahindwa, Vedaste; Manzi, Anatole; Mukabutera, Assumpta; Karema, Corine; Condo, Jeanine; Hedt-Gauthier, Bethany

2016-09-29

To guide efficient investment of limited health resources in sub-Saharan Africa, local researchers need to be involved in, and guide, health system and policy research. While extensive survey and census data are available to health researchers and program officers in resource-limited countries, local involvement and leadership in research is limited due to inadequate experience, lack of dedicated research time and weak interagency connections, among other challenges. Many research-strengthening initiatives host prolonged fellowships out-of-country, yet their approaches have not been evaluated for effectiveness in involvement and development of local leadership in research. We developed, implemented and evaluated a multi-month, deliverable-driven, survey analysis training based in Rwanda to strengthen skills of five local research leaders, 15 statisticians, and a PhD candidate. Research leaders applied with a specific research question relevant to country challenges and committed to leading an analysis to publication. Statisticians with prerequisite statistical training and experience with a statistical software applied to participate in class-based trainings and complete an assigned analysis. Both statisticians and research leaders were provided ongoing in-country mentoring for analysis and manuscript writing. Participants reported a high level of skill, knowledge and collaborator development from class-based trainings and out-of-class mentorship that were sustained 1 year later. Five of six manuscripts were authored by multi-institution teams and submitted to international peer-reviewed scientific journals, and three-quarters of the participants mentored others in survey data analysis or conducted an additional survey analysis in the year following the training. Our model was effective in utilizing existing survey data and strengthening skills among full-time working professionals without disrupting ongoing work commitments and using few resources. Critical to our

Near-infrared radiation curable multilayer coating systems and methods for applying same

Science.gov (United States)

Bowman, Mark P; Verdun, Shelley D; Post, Gordon L

2015-04-28

Multilayer coating systems, methods of applying and related substrates are disclosed. The coating system may comprise a first coating comprising a near-IR absorber, and a second coating deposited on a least a portion of the first coating. Methods of applying a multilayer coating composition to a substrate may comprise applying a first coating comprising a near-IR absorber, applying a second coating over at least a portion of the first coating and curing the coating with near infrared radiation.

Cloud Computing and Internet of Things Concepts Applied on Buildings Data Analysis

Directory of Open Access Journals (Sweden)

Hebean Florin-Adrian

2017-12-01

Full Text Available Used and developed initially for the IT industry, the Cloud computing and Internet of Things concepts are found at this moment in a lot of sectors of activity, building industry being one of them. These are defined like a global computing, monitoring and analyze network, which is composed of hardware and software resources, with the feature of allocating and dynamically relocating the shared resources, in accordance with user requirements. Data analysis and process optimization techniques based on these new concepts are used increasingly more in the buildings industry area, especially for an optimal operations of the buildings installations and also for increasing occupants comfort. The multitude of building data taken from HVAC sensor, from automation and control systems and from the other systems connected to the network are optimally managed by these new analysis techniques. Through analysis techniques can be identified and manage the issues the arise in operation of building installations like critical alarms, nonfunctional equipment, issues regarding the occupants comfort, for example the upper and lower temperature deviation to the set point and other issues related to equipment maintenance. In this study, a new approach regarding building control is presented and also a generalized methodology for applying data analysis to building services data is described. This methodology is then demonstrated using two case studies.

A Vision for Systems Engineering Applied to Wind Energy (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Felker, F.; Dykes, K.

2015-01-01

This presentation was given at the Third Wind Energy Systems Engineering Workshop on January 14, 2015. Topics covered include the importance of systems engineering, a vision for systems engineering as applied to wind energy, and application of systems engineering approaches to wind energy research and development.

Applying Dynamical Systems Theory to Optimize Libration Point Orbit Stationkeeping Maneuvers for WIND

Science.gov (United States)

Brown, Jonathan M.; Petersen, Jeremy D.

2014-01-01

NASA's WIND mission has been operating in a large amplitude Lissajous orbit in the vicinity of the interior libration point of the Sun-Earth/Moon system since 2004. Regular stationkeeping maneuvers are required to maintain the orbit due to the instability around the collinear libration points. Historically these stationkeeping maneuvers have been performed by applying an incremental change in velocity, or (delta)v along the spacecraft-Sun vector as projected into the ecliptic plane. Previous studies have shown that the magnitude of libration point stationkeeping maneuvers can be minimized by applying the (delta)v in the direction of the local stable manifold found using dynamical systems theory. This paper presents the analysis of this new maneuver strategy which shows that the magnitude of stationkeeping maneuvers can be decreased by 5 to 25 percent, depending on the location in the orbit where the maneuver is performed. The implementation of the optimized maneuver method into operations is discussed and results are presented for the first two optimized stationkeeping maneuvers executed by WIND.

Elastic and inelastic methods of piping systems analysis: a preliminary review

International Nuclear Information System (INIS)

Reich, M.; Esztergar, E.P.; Spence, J.; Boyle, J.; Chang, T.Y.

1975-02-01

A preliminary review of the methods used for elastic and inelastic piping system analysis is presented. The following principal conclusions are reached: techniques for the analysis of complex piping systems operating in the high temperature creep regime should be further developed; accurate analysis of a complete pipework system in creep using the ''complete shell finite element methods'' is not feasible at the present, and the ''reduced shell finite element method'' still requires excessive computer time and also requires further investigation regarding the compatibility problems associated with the pipe bend element, particularly when applied to cases involving general loading conditions; and with the current size of proposed high temperature systems requiring the evaluation of long-term operating life (30 to 40 years), it is important to adopt a simplified analysis method. A design procedure for a simplified analysis method based on currently available techniques applied in a three-stage approach is outlined. The work required for implementation of these procedures together with desirable future developments are also briefly discussed. Other proposed simplified approximations also are reviewed in the text. 101 references. (U.S.)

Development of HANARO Activation Analysis System and Utilization Technology

Energy Technology Data Exchange (ETDEWEB)

Chung, Y. S.; Moon, J. H.; Cho, H. J. (and others)

2007-06-15

1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility.

Development of HANARO Activation Analysis System and Utilization Technology

International Nuclear Information System (INIS)

Chung, Y. S.; Moon, J. H.; Cho, H. J.

2007-06-01

1. Establishment of evaluation system using a data for a neutron activation analysis : Improvement of NAA measurement system and its identification, Development of combined data evaluation code of NAA/PGAA, International technical cooperation project 2. Development of technique for a industrial application of high precision gamma nuclide spectroscopic analysis : Analytical quality control, Development of industrial application techniques and its identification 3. Industrial application research for a prompt gamma-ray activation analysis : Improvement of Compton suppression counting system (PGAA), Development of applied technology using a PGAA system 4. Establishment of NAA user supporting system and KOLAS management : Development and validation of KOLAS/ISO accreditation testing and identification method, Cooperation researches for a industrial application, Establishment of integrated user analytical supporting system, Accomplishment of sample irradiation facility

Spectral analysis and filter theory in applied geophysics

CERN Document Server

Buttkus, Burkhard

2000-01-01

This book is intended to be an introduction to the fundamentals and methods of spectral analysis and filter theory and their appli­ cations in geophysics. The principles and theoretical basis of the various methods are described, their efficiency and effectiveness eval­ uated, and instructions provided for their practical application. Be­ sides the conventional methods, newer methods arediscussed, such as the spectral analysis ofrandom processes by fitting models to the ob­ served data, maximum-entropy spectral analysis and maximum-like­ lihood spectral analysis, the Wiener and Kalman filtering methods, homomorphic deconvolution, and adaptive methods for nonstation­ ary processes. Multidimensional spectral analysis and filtering, as well as multichannel filters, are given extensive treatment. The book provides a survey of the state-of-the-art of spectral analysis and fil­ ter theory. The importance and possibilities ofspectral analysis and filter theory in geophysics for data acquisition, processing an...

Applying usability heuristics to radiotherapy systems

International Nuclear Information System (INIS)

Chan, Alvita J.; Islam, Mohammad K.; Rosewall, Tara; Jaffray, David A.; Easty, Anthony C.; Cafazzo, Joseph A.

2012-01-01

Background and purpose: Heuristic evaluations have been used to evaluate safety of medical devices by identifying and assessing usability issues. Since radiotherapy treatment delivery systems often consist of multiple complex user-interfaces, a heuristic evaluation was conducted to assess the potential safety issues of such a system. Material and methods: A heuristic evaluation was conducted to evaluate the treatment delivery system at Princess Margaret Hospital (Toronto, Canada). Two independent evaluators identified usability issues with the user-interfaces and rated the severity of each issue. Results: The evaluators identified 75 usability issues in total. Eighteen of them were rated as high severity, indicating the potential to have a major impact on patient safety. A majority of issues were found on the record and verify system, and many were associated with the patient setup process. While the hospital has processes in place to ensure patient safety, recommendations were developed to further mitigate the risks of potential consequences. Conclusions: Heuristic evaluation is an efficient and inexpensive method that can be successfully applied to radiotherapy delivery systems to identify usability issues and improve patient safety. Although this study was conducted only at one site, the findings may have broad implications for the design of these systems.

Phased mission analysis of maintained systems: a study in reliability risk analysis

International Nuclear Information System (INIS)

Terpstra, K.

1984-01-01

The present study develops a general theory that treats the probability of occurrence of each branch of an event tree and that takes correctly into account the dependencies between systems; incorporates within the general theory the solution of the problem of phased mission analysis. It also includes the general model components, that may or may not be repairable, with general lifetime and repairtime distribution, i.e. in the model repairable systems should be taken into account. Finally a computer program is developed that is based on this general theory, i.e. a computer program that is able to perform fully the probabilistic calculations of a risk analysis and that can handle in a correct way phased mission analysis of repairable systems. The theory is applied to a boiling water reactor accident. (Auth.)

Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

Science.gov (United States)

Biess, J. J.; Yu, Y.; Middlebrook, R. D.; Schoenfeld, A. D.

1974-01-01

A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks.

Discrete Event Supervisory Control Applied to Propulsion Systems

Science.gov (United States)

Litt, Jonathan S.; Shah, Neerav

2005-01-01

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

Defence in Depth - Applied to the Nuclear System

Energy Technology Data Exchange (ETDEWEB)

Weightman, M., E-mail: mike_weightman@hotmail.com

2014-10-15

Full text: Normally, the Defence in Depth concept is applied to the technical barriers that provide protection to the public and workers from nuclear accidents. This allows designers, operators and regulators to challenge (along with using other design principles such as independence, redundancy, diversity, single point failure, etc) the technical systems provided to see whether more needs to be done to provide adequate defence in depth to ensure risks are reduced so far as is reasonably practical. Post Fukushima, much thought has gone into reconsidering whether the effectiveness of the defence in depth concept can be enhanced by, for example, rebalancing the attention between prevention and mitigation or enhancing the independence of protective measures such as providing extremely robust standalone emergency cooling capability. This presentation argues that Fukushima teaches us a more fundamental lesson - that the defence in depth concept (along with other design principles') should be applied to the nuclear system to see whether more should be done to enhance the institutional barriers in any particular nuclear system. These barriers are at three main levels: industry, regulators and stakeholders each with sub-barriers. It reinforces the need for industry and regulators to be independent, open and transparent so that the nuclear system can work effectively. Examples are given where the application of the model identifies areas for improvement in existing systems. (author)

TRICARE Applied Behavior Analysis (ABA) Benefit: Comparison with Medicaid and Commercial Benefits.

Science.gov (United States)

Maglione, Margaret; Kadiyala, Srikanth; Kress, Amii; Hastings, Jaime L; O'Hanlon, Claire E

2017-01-01

This study compared the Applied Behavior Analysis (ABA) benefit provided by TRICARE as an early intervention for autism spectrum disorder with similar benefits in Medicaid and commercial health insurance plans. The sponsor, the Office of the Under Secretary of Defense for Personnel and Readiness, was particularly interested in how a proposed TRICARE reimbursement rate decrease from $125 per hour to $68 per hour for ABA services performed by a Board Certified Behavior Analyst compared with reimbursement rates (defined as third-party payment to the service provider) in Medicaid and commercial health insurance plans. Information on ABA coverage in state Medicaid programs was collected from Medicaid state waiver databases; subsequently, Medicaid provider reimbursement data were collected from state Medicaid fee schedules. Applied Behavior Analysis provider reimbursement in the commercial health insurance system was estimated using Truven Health MarketScan® data. A weighted mean U.S. reimbursement rate was calculated for several services using cross-state information on the number of children diagnosed with autism spectrum disorder. Locations of potential provider shortages were also identified. Medicaid and commercial insurance reimbursement rates varied considerably across the United States. This project concluded that the proposed $68-per-hour reimbursement rate for services provided by a board certified analyst was more than 25 percent below the U.S. mean.

Applied behavior analysis: understanding and changing behavior in the community-a representative review.

Science.gov (United States)

Luyben, Paul D

2009-01-01

Applied behavior analysis, a psychological discipline, has been characterized as the science of behavior change (Chance, 2006). Research in applied behavior analysis has been published for approximately 40 years since the initial publication of the Journal of Applied Behavior Analysis in 1968. The field now encompasses a wide range of human behavior. Although much of the published research centers on problem behaviors that occur in schools and among people with disabilities, a substantial body of knowledge has emerged in community settings. This article provides a review of the behavioral community research published in the Journal of Applied Behavior Analysis as representative of this work, including research in the areas of home and family, health, safety, community involvement and the environment, recreation and sports, crime and delinquency, and organizations. In the interest of space, research in schools and with people with disabilities has been excluded from this review.

Applying Trusted Network Technology To Process Control Systems

Science.gov (United States)

Okhravi, Hamed; Nicol, David

Interconnections between process control networks and enterprise networks expose instrumentation and control systems and the critical infrastructure components they operate to a variety of cyber attacks. Several architectural standards and security best practices have been proposed for industrial control systems. However, they are based on older architectures and do not leverage the latest hardware and software technologies. This paper describes new technologies that can be applied to the design of next generation security architectures for industrial control systems. The technologies are discussed along with their security benefits and design trade-offs.

SOME EXAMPLES OF APPLIED SYSTEMS WITH SPEECH INTERFACE

Directory of Open Access Journals (Sweden)

V. A. Zhitko

2017-01-01

Full Text Available Three examples of applied systems with a speech interface are considered in the article. The first two of these provide the end user with the opportunity to ask verbally the question and to hear the response from the system, creating an addition to the traditional I / O via the keyboard and computer screen. The third example, the «IntonTrainer» system, provides the user with the possibility of voice interaction and is designed for in-depth self-learning of the intonation of oral speech.

Power System Oscillation Modes Identifications: Guidelines for Applying TLS-ESPRIT Method

Science.gov (United States)

Gajjar, Gopal R.; Soman, Shreevardhan

2013-05-01

Fast measurements of power system quantities available through wide-area measurement systems enables direct observations for power system electromechanical oscillations. But the raw observations data need to be processed to obtain the quantitative measures required to make any inference regarding the power system state. A detailed discussion is presented for the theory behind the general problem of oscillatory mode indentification. This paper presents some results on oscillation mode identification applied to a wide-area frequency measurements system. Guidelines for selection of parametes for obtaining most reliable results from the applied method are provided. Finally, some results on real measurements are presented with our inference on them.

Multilayers quantitative X-ray fluorescence analysis applied to easel paintings.

Science.gov (United States)

de Viguerie, Laurence; Sole, V Armando; Walter, Philippe

2009-12-01

X-ray fluorescence spectrometry (XRF) allows a rapid and simple determination of the elemental composition of a material. As a non-destructive tool, it has been extensively used for analysis in art and archaeology since the early 1970s. Whereas it is commonly used for qualitative analysis, recent efforts have been made to develop quantitative treatment even with portable systems. However, the interpretation of the results obtained with this technique can turn out to be problematic in the case of layered structures such as easel paintings. The use of differential X-ray attenuation enables modelling of the various layers: indeed, the absorption of X-rays through different layers will result in modification of intensity ratio between the different characteristic lines. This work focuses on the possibility to use XRF with the fundamental parameters method to reconstruct the composition and thickness of the layers. This method was tested on several multilayers standards and gives a maximum error of 15% for thicknesses and errors of 10% for concentrations. On a painting test sample that was rather inhomogeneous, the XRF analysis provides an average value. This method was applied in situ to estimate the thickness of the layers a painting from Marco d'Oggiono, pupil of Leonardo da Vinci.

B. F. Skinner's Contributions to Applied Behavior Analysis

Science.gov (United States)

Morris, Edward K.; Smith, Nathaniel G.; Altus, Deborah E.

2005-01-01

Our paper reviews and analyzes B. F. Skinner's contributions to applied behavior analysis in order to assess his role as the field's originator and founder. We found, first, that his contributions fall into five categorizes: the style and content of his science, his interpretations of typical and atypical human behavior, the implications he drew…

A Pilot Study on Applying Risk Informed Application Option 2 to Six Systems in UCN 3

International Nuclear Information System (INIS)

Kim, Kil-Yoo; Yang, Joon-Eon; Lee, Young-Joo; Chung, Hye-Won

2007-01-01

To reduce the unnecessary burden of a regulation, NRC prepared three options for the risk informed regulatory framework known as Option 1, Option 2 and Option 3. In Option 2, all safety related Structure, System and Components (SSCs) and non-safety related SSCs are evaluated from a safety point of view, and the low safety significant SSCs belonging to the safety related group are called 'Risk Informed Safety Class (RISC) - 3' SSCs. The 'RISC-3' SSCs can be exempted from the special treatment requirements such as a seismic and environmental requirement, of 10 CFR 50. Two years ago, a paper was published which described the Option 2 method applied to the high pressure safety injection system (HPSI) and the essential service water system (ESW) of UCN 3. However, this paper describes the results when Option 2 is applied to the other 4 systems such as a low pressure safety injection system(LPSI), safety depressurization system(SDS), instrument air system(IAS), safety injection tank(SIT). First of all, this paper includes the results from the importance analysis in view of a Fire PSA and Level 2 PSA

Interferogram reduction and interpretation as applied to the optical analysis of a laser fusion system

International Nuclear Information System (INIS)

Viswanathan, V.K.; Sollid, J.E.; Hall, W.S.; Liberman, I.; Lawrence, G.

1978-01-01

The 10 kJ Eight-Beam CO 2 Laser Fusion System, currently under construction at Los Alamos Scientific Laboratory (LASL), has approximately 100 optical elements per beam. The nominal system is diffraction limited and degradations in performance are caused primarily by imperfect components and alignment errors. Consequently, analysis and predictions for the system are very much dependent on the proper description of the imperfect components. The approach taken at LASL has been to characterize the components interferometrically. An example of this procedure, using an actual interferogram of a manufactured component, will be presented and the various limitations will be discussed

A Concept Analysis of Systems Thinking.

Science.gov (United States)

Stalter, Ann M; Phillips, Janet M; Ruggiero, Jeanne S; Scardaville, Debra L; Merriam, Deborah; Dolansky, Mary A; Goldschmidt, Karen A; Wiggs, Carol M; Winegardner, Sherri

2017-10-01

This concept analysis, written by the National Quality and Safety Education for Nurses (QSEN) RN-BSN Task Force, defines systems thinking in relation to healthcare delivery. A review of the literature was conducted using five databases with the keywords "systems thinking" as well as "nursing education," "nursing curriculum," "online," "capstone," "practicum," "RN-BSN/RN to BSN," "healthcare organizations," "hospitals," and "clinical agencies." Only articles that focused on systems thinking in health care were used. The authors identified defining attributes, antecedents, consequences, and empirical referents of systems thinking. Systems thinking was defined as a process applied to individuals, teams, and organizations to impact cause and effect where solutions to complex problems are accomplished through collaborative effort according to personal ability with respect to improving components and the greater whole. Four primary attributes characterized systems thinking: dynamic system, holistic perspective, pattern identification, and transformation. Using the platform provided in this concept analysis, interprofessional practice has the ability to embrace planned efforts to improve critically needed quality and safety initiatives across patients' lifespans and all healthcare settings. © 2016 Wiley Periodicals, Inc.

Sizing through simulation of systems for photovoltaic solar energy applied to rural electrification

International Nuclear Information System (INIS)

Rodríguez‐Borges, Ciaddy Gina; Sarmiento‐Sera, Antonio

2011-01-01

The present work is based on the sizing method by means of simulation of the photovoltaic systems energy behavior, applied to rural electrification in regions far from the electric net. The denomination of infra/over sized systems is made and a requested analysis of one particular case is exposed, where it is considered two energy options of different qualities of electric service and the economic valuation of each option is requested, with its corresponding argument. The quality level is established with the fault index in the electricity service for energy lack in the batteries, besides the quantity of energy autonomy days of the system. As conclusions, in infra-sizing conditions systems, and with established quality level of service, multiple sizing solutions exist, and under certain conditions, not always the systems with more quality level, are those of more cost, as well as the presence of a minimum cost in the sizing can be obtained by simulation methods. (author)

Decomposition with thermoeconomic isolation applied to the optimal synthesis/design and operation of an advanced tactical aircraft system

International Nuclear Information System (INIS)

Rancruel, Diego F.; Spakovsky, Michael R. von

2006-01-01

A decomposition methodology based on the concept of 'thermoeconomic isolation' and applied to the synthesis/design and operational optimization of an advanced tactical fighter aircraft is the focus of this paper. The total system is composed of six sub-systems of which five participate with degrees of freedom (493) in the optimization. They are the propulsion sub-system (PS), the environmental control sub-system (ECS), the fuel loop subsystem (FLS), the vapor compression and Polyalphaolefin (PAO) loops sub-system (VC/PAOS), and the airframe sub-system (AFS). The sixth subsystem comprises the expendable and permanent payloads as well as the equipment group. For each of the first five, detailed thermodynamic, geometric, physical, and aerodynamic models at both design and off-design were formulated and implemented. The most promising set of aircraft sub-system and system configurations were then determined based on both an energy integration and aerodynamic performance analysis at each stage of the mission (including the transient ones). Conceptual, time, and physical decomposition were subsequently applied to the synthesis/design and operational optimization of these aircraft configurations as well as to the highly dynamic process of heat generation and dissipation internal to the subsystems. The physical decomposition strategy used (i.e. Iterative Local-Global Optimization-ILGO) is the first to successfully closely approach the theoretical condition of 'thermoeconomic isolation' when applied to highly complex, highly dynamic non-linear systems. Developed at our Center for Energy Systems research, it has been effectively applied to a number of complex stationary and transportation applications

Decomposition with thermoeconomic isolation applied to the optimal synthesis/design and operation of an advanced tactical aircraft system

Energy Technology Data Exchange (ETDEWEB)

Rancruel, Diego F. [Center for Energy Systems Research, Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24060 (United States); Spakovsky, Michael R. von [Center for Energy Systems Research, Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24060 (United States)]. E-mail: vonspako@vt.edu

2006-12-15

A decomposition methodology based on the concept of 'thermoeconomic isolation' and applied to the synthesis/design and operational optimization of an advanced tactical fighter aircraft is the focus of this paper. The total system is composed of six sub-systems of which five participate with degrees of freedom (493) in the optimization. They are the propulsion sub-system (PS), the environmental control sub-system (ECS), the fuel loop subsystem (FLS), the vapor compression and Polyalphaolefin (PAO) loops sub-system (VC/PAOS), and the airframe sub-system (AFS). The sixth subsystem comprises the expendable and permanent payloads as well as the equipment group. For each of the first five, detailed thermodynamic, geometric, physical, and aerodynamic models at both design and off-design were formulated and implemented. The most promising set of aircraft sub-system and system configurations were then determined based on both an energy integration and aerodynamic performance analysis at each stage of the mission (including the transient ones). Conceptual, time, and physical decomposition were subsequently applied to the synthesis/design and operational optimization of these aircraft configurations as well as to the highly dynamic process of heat generation and dissipation internal to the subsystems. The physical decomposition strategy used (i.e. Iterative Local-Global Optimization-ILGO) is the first to successfully closely approach the theoretical condition of 'thermoeconomic isolation' when applied to highly complex, highly dynamic non-linear systems. Developed at our Center for Energy Systems research, it has been effectively applied to a number of complex stationary and transportation applications.

Analysis and design of energy systems

International Nuclear Information System (INIS)

Bajura, R.A.; Marston, C.H.; Tstsaronis, G.

1989-01-01

The 1980s saw growing public awareness of environmental issues. Events such as an unusually hot and dry summer in parts of the world, contamination of community drinking water supplies by leakage from abandoned waste disposal sites, and the discovery of a hole in the ozone layer in the upper stratosphere over Antarctica made headlines in the popular press. The long-range impact of these events on the environment or on human health is still being debated by the scientific and technical communities. In the interim, however, it is prudent to mitigate any possible environmental problems by continuing to develop high-efficiency energy utilization systems that are also cost effective and environmentally sound. High-efficiency fossil energy systems have a number of environmental benefits: carbon dioxide production is reduced and this, in turn, reduces the potential environmental insult which may occur during resource extraction or shipping. Thermodynamic analysis coupled with economic analysis is a useful tool to identify practical, high-efficiency systems. The Symposium on the Analysis and Design of Energy Systems is intended to provide a forum to present both advances in analytical techniques for this type of system and case studies applying these techniques

Systems biology: the reincarnation of systems theory applied in biology?

Science.gov (United States)

Wolkenhauer, O

2001-09-01

With the availability of quantitative data on the transcriptome and proteome level, there is an increasing interest in formal mathematical models of gene expression and regulation. International conferences, research institutes and research groups concerned with systems biology have appeared in recent years and systems theory, the study of organisation and behaviour per se, is indeed a natural conceptual framework for such a task. This is, however, not the first time that systems theory has been applied in modelling cellular processes. Notably in the 1960s systems theory and biology enjoyed considerable interest among eminent scientists, mathematicians and engineers. Why did these early attempts vanish from research agendas? Here we shall review the domain of systems theory, its application to biology and the lessons that can be learned from the work of Robert Rosen. Rosen emerged from the early developments in the 1960s as a main critic but also developed a new alternative perspective to living systems, a concept that deserves a fresh look in the post-genome era of bioinformatics.

Reflections of the social environment in chimpanzee memory: applying rational analysis beyond humans.

Science.gov (United States)

Stevens, Jeffrey R; Marewski, Julian N; Schooler, Lael J; Gilby, Ian C

2016-08-01

In cognitive science, the rational analysis framework allows modelling of how physical and social environments impose information-processing demands onto cognitive systems. In humans, for example, past social contact among individuals predicts their future contact with linear and power functions. These features of the human environment constrain the optimal way to remember information and probably shape how memory records are retained and retrieved. We offer a primer on how biologists can apply rational analysis to study animal behaviour. Using chimpanzees ( Pan troglodytes ) as a case study, we modelled 19 years of observational data on their social contact patterns. Much like humans, the frequency of past encounters in chimpanzees linearly predicted future encounters, and the recency of past encounters predicted future encounters with a power function. Consistent with the rational analyses carried out for human memory, these findings suggest that chimpanzee memory performance should reflect those environmental regularities. In re-analysing existing chimpanzee memory data, we found that chimpanzee memory patterns mirrored their social contact patterns. Our findings hint that human and chimpanzee memory systems may have evolved to solve similar information-processing problems. Overall, rational analysis offers novel theoretical and methodological avenues for the comparative study of cognition.

Investigation of energy management strategies for photovoltaic systems - An analysis technique

Science.gov (United States)

Cull, R. C.; Eltimsahy, A. H.

1982-01-01

Progress is reported in formulating energy management strategies for stand-alone PV systems, developing an analytical tool that can be used to investigate these strategies, applying this tool to determine the proper control algorithms and control variables (controller inputs and outputs) for a range of applications, and quantifying the relative performance and economics when compared to systems that do not apply energy management. The analysis technique developed may be broadly applied to a variety of systems to determine the most appropriate energy management strategies, control variables and algorithms. The only inputs required are statistical distributions for stochastic energy inputs and outputs of the system and the system's device characteristics (efficiency and ratings). Although the formulation was originally driven by stand-alone PV system needs, the techniques are also applicable to hybrid and grid connected systems.

Bisimulation, Logic and Reachability Analysis for Markovian Systems

NARCIS (Netherlands)

Bujorianu, L.M.; Bujorianu, M.C.

2008-01-01

In the recent years, there have been a large amount of investigations on safety verification of uncertain continuous systems. In engineering and applied mathematics, this verification is called stochastic reachability analysis, while in computer science this is called probabilistic model checking

Applied systems theory as a means for studying the function and dynamics of living space used for agro-silviculture

Energy Technology Data Exchange (ETDEWEB)

Grossmann, W D; Schneider, T W

1980-09-01

Applied systems theories are sensitive tools for analysing the functions and dynamics of agrosilvicultural systems. Major interactions within and between agrosilvicultural systems and the natural and socio-economic environment are represented by corresponding interactions within a hierarchy of system models. A new meta-criteria analysis quantifies the variables of agrosilvicultural systems and produces indicators for assessing the stability or instability of the whole system complex. Two highly disaggregated models predict growth and yield and analyse structure and floristic variation of forest systems.

Stability Analysis of Periodic Systems by Truncated Point Mappings

Science.gov (United States)

Guttalu, R. S.; Flashner, H.

1996-01-01

An approach is presented deriving analytical stability and bifurcation conditions for systems with periodically varying coefficients. The method is based on a point mapping(period to period mapping) representation of the system's dynamics. An algorithm is employed to obtain an analytical expression for the point mapping and its dependence on the system's parameters. The algorithm is devised to derive the coefficients of a multinominal expansion of the point mapping up to an arbitrary order in terms of the state variables and of the parameters. Analytical stability and bifurcation condition are then formulated and expressed as functional relations between the parameters. To demonstrate the application of the method, the parametric stability of Mathieu's equation and of a two-degree of freedom system are investigated. The results obtained by the proposed approach are compared to those obtained by perturbation analysis and by direct integration which we considered to the "exact solution". It is shown that, unlike perturbation analysis, the proposed method provides very accurate solution even for large valuesof the parameters. If an expansion of the point mapping in terms of a small parameter is performed the method is equivalent to perturbation analysis. Moreover, it is demonstrated that the method can be easily applied to multiple-degree-of-freedom systems using the same framework. This feature is an important advantage since most of the existing analysis methods apply mainly to single-degree-of-freedom systems and their extension to higher dimensions is difficult and computationally cumbersome.

X-ray fluorescence spectrometry applied to soil analysis

International Nuclear Information System (INIS)

Salvador, Vera Lucia Ribeiro; Sato, Ivone Mulako; Scapin Junior, Wilson Santo; Scapin, Marcos Antonio; Imakima, Kengo

1997-01-01

This paper studies the X-ray fluorescence spectrometry applied to the soil analysis. A comparative study of the WD-XRFS and ED-XRFS techniques was carried out by using the following soil samples: SL-1, SOIL-7 and marine sediment SD-M-2/TM, from IAEA, and clay, JG-1a from Geological Survey of Japan (GSJ)

Neutron activation analysis applied to energy and environment

International Nuclear Information System (INIS)

Lyon, W.S.

1975-01-01

Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

Research in progress in applied mathematics, numerical analysis, and computer science

Science.gov (United States)

1990-01-01

Research conducted at the Institute in Science and Engineering in applied mathematics, numerical analysis, and computer science is summarized. The Institute conducts unclassified basic research in applied mathematics in order to extend and improve problem solving capabilities in science and engineering, particularly in aeronautics and space.

Reliability analysis of protection systems in NPP applying fault-tree analysis method

International Nuclear Information System (INIS)

Bokor, J.; Gaspar, P.; Hetthessy, J.; Szabo, G.

1998-01-01

This paper demonstrates the applicability and limits of dependability analysis in nuclear power plants (NPPS) based on the reactor protection refurbishment project (RRP) in NPP Paks. This paper illustrates case studies from the reliability analysis for NPP Paks. It also investigates the solutions for the connection between the data acquisition and subsystem control units (TSs) and the voter units (VTs), it analyzes the influence of the voting in the VT computer level, it studies the effects of the testing procedures to the dependability parameters. (author)

Integrated systems analysis of the PIUS reactor

International Nuclear Information System (INIS)

Fullwood, F.; Kroeger, P.; Higgins, J.

1993-11-01

Results are presented of a systems failure analysis of the PIUS plant systems that are used during normal reactor operation and postulated accidents. This study was performed to provide the NRC with an understanding of the behavior of the plant. The study applied two diverse failure identification methods, Failure Modes Effects ampersand Criticality Analysis (FMECA) and Hazards ampersand Operability (HAZOP) to the plant systems, supported by several deterministic analyses. Conventional PRA methods were also used along with a scheme for classifying events by initiator frequency and combinations of failures. Principal results of this study are: (a) an extensive listing of potential event sequences, grouped in categories that can be used by the NRC, (b) identification of support systems that are important to safety, and (c) identification of key operator actions

Integrated systems analysis of the PIUS reactor

Energy Technology Data Exchange (ETDEWEB)

Fullwood, F.; Kroeger, P.; Higgins, J. [Brookhaven National Lab., Upton, NY (United States)] [and others

1993-11-01

Results are presented of a systems failure analysis of the PIUS plant systems that are used during normal reactor operation and postulated accidents. This study was performed to provide the NRC with an understanding of the behavior of the plant. The study applied two diverse failure identification methods, Failure Modes Effects & Criticality Analysis (FMECA) and Hazards & Operability (HAZOP) to the plant systems, supported by several deterministic analyses. Conventional PRA methods were also used along with a scheme for classifying events by initiator frequency and combinations of failures. Principal results of this study are: (a) an extensive listing of potential event sequences, grouped in categories that can be used by the NRC, (b) identification of support systems that are important to safety, and (c) identification of key operator actions.

Comprehensive method of common-mode failure analysis for LMFBR safety systems

International Nuclear Information System (INIS)

Unione, A.J.; Ritzman, R.L.; Erdmann, R.C.

1976-01-01

A technique is demonstrated which allows the systematic treatment of common-mode failures of safety system performance. The technique uses log analysis in the form of fault and success trees to qualitatively assess the sources of common-mode failure and quantitatively estimate the contribution to the overall risk of system failure. The analysis is applied to the secondary control rod system of an early sized LMFBR

Performance Monitoring Applied to System Supervision

Directory of Open Access Journals (Sweden)

Bertille Somon

2017-07-01

Full Text Available Nowadays, automation is present in every aspect of our daily life and has some benefits. Nonetheless, empirical data suggest that traditional automation has many negative performance and safety consequences as it changed task performers into task supervisors. In this context, we propose to use recent insights into the anatomical and neurophysiological substrates of action monitoring in humans, to help further characterize performance monitoring during system supervision. Error monitoring is critical for humans to learn from the consequences of their actions. A wide variety of studies have shown that the error monitoring system is involved not only in our own errors, but also in the errors of others. We hypothesize that the neurobiological correlates of the self-performance monitoring activity can be applied to system supervision. At a larger scale, a better understanding of system supervision may allow its negative effects to be anticipated or even countered. This review is divided into three main parts. First, we assess the neurophysiological correlates of self-performance monitoring and their characteristics during error execution. Then, we extend these results to include performance monitoring and error observation of others or of systems. Finally, we provide further directions in the study of system supervision and assess the limits preventing us from studying a well-known phenomenon: the Out-Of-the-Loop (OOL performance problem.

IAEA-ASSET's root cause analysis method applied to sodium leakage incident at Monju

International Nuclear Information System (INIS)

Watanabe, Norio; Hirano, Masashi

1997-08-01

The present study applied the ASSET (Analysis and Screening of Safety Events Team) methodology (This method identifies occurrences such as component failures and operator errors, identifies their respective direct/root causes and determines corrective actions.) to the analysis of the sodium leakage incident at Monju, based on the published reports by mainly the Science and Technology Agency, aiming at systematic identification of direct/root causes and corrective actions, and discussed the effectiveness and problems of the ASSET methodology. The results revealed the following seven occurrences and showed the direct/root causes and contributing factors for the individual occurrences: failure of thermometer well tube, delayed reactor manual trip, inadequate continuous monitoring of leakage, misjudgment of leak rate, non-required operator action (turbine trip), retarded emergency sodium drainage, and retarded securing of ventilation system. Most of the occurrences stemmed from deficiencies in emergency operating procedures (EOPs), which were mainly caused by defects in the EOP preparation process and operator training programs. The corrective actions already proposed in the published reports were reviewed, identifying issues to be further studied. Possible corrective actions were discussed for these issues. The present study also demonstrated the effectiveness of the ASSET methodology and pointed out some problems, for example, in delineating causal relations among occurrences, for applying it to the detail and systematic analysis of event direct/root causes and determination of concrete measures. (J.P.N.)

Investigation on method of elasto-plastic analysis for piping system (benchmark analysis)

International Nuclear Information System (INIS)

Kabaya, Takuro; Kojima, Nobuyuki; Arai, Masashi

2015-01-01

This paper provides method of an elasto-plastic analysis for practical seismic design of nuclear piping system. JSME started up the task to establish method of an elasto-plastic analysis for nuclear piping system. The benchmark analyses have been performed in the task to investigate on method of an elasto-plastic analysis. And our company has participated in the benchmark analyses. As a result, we have settled on the method which simulates the result of piping exciting test accurately. Therefore the recommended method of an elasto-plastic analysis is shown as follows; 1) An elasto-plastic analysis is composed of dynamic analysis of piping system modeled by using beam elements and static analysis of deformed elbow modeled by using shell elements. 2) Bi-linear is applied as an elasto-plastic property. Yield point is standardized yield point multiplied by 1.2 times, and second gradient is 1/100 young's modulus. Kinematic hardening is used as a hardening rule. 3) The fatigue life is evaluated on strain ranges obtained by elasto-plastic analysis, by using the rain flow method and the fatigue curve of previous studies. (author)

Database management systems understanding and applying database technology

CERN Document Server

Gorman, Michael M

1991-01-01

Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

Unified Modeling of Discrete Event and Control Systems Applied in Manufacturing

Directory of Open Access Journals (Sweden)

Amanda Arêas de Souza

2015-05-01

Full Text Available For the development of both a simulation modeland a control system, it is necessary to build, inadvance, a conceptual model. This is what isusually suggested by the methodologies applied inprojects of this nature. Some conceptual modelingtechniques allow for a better understanding ofthe simulation model, and a clear descriptionof the logic of control systems. Therefore, thispaper aims to present and evaluate conceptuallanguages for unified modeling of models ofdiscrete event simulation and control systemsapplied in manufacturing. The results show thatthe IDEF-SIM language can be applied both insimulation systems and in process control.

Reachability analysis of real-time systems using time Petri nets.

Science.gov (United States)

Wang, J; Deng, Y; Xu, G

2000-01-01

Time Petri nets (TPNs) are a popular Petri net model for specification and verification of real-time systems. A fundamental and most widely applied method for analyzing Petri nets is reachability analysis. The existing technique for reachability analysis of TPNs, however, is not suitable for timing property verification because one cannot derive end-to-end delay in task execution, an important issue for time-critical systems, from the reachability tree constructed using the technique. In this paper, we present a new reachability based analysis technique for TPNs for timing property analysis and verification that effectively addresses the problem. Our technique is based on a concept called clock-stamped state class (CS-class). With the reachability tree generated based on CS-classes, we can directly compute the end-to-end time delay in task execution. Moreover, a CS-class can be uniquely mapped to a traditional state class based on which the conventional reachability tree is constructed. Therefore, our CS-class-based analysis technique is more general than the existing technique. We show how to apply this technique to timing property verification of the TPN model of a command and control (C2) system.

Use of eye tracking equipment for human reliability analysis applied to complex system operations

International Nuclear Information System (INIS)

Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos

2017-01-01

This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

Use of eye tracking equipment for human reliability analysis applied to complex system operations

Energy Technology Data Exchange (ETDEWEB)

Pinheiro, Andre Ricardo Mendonça; Prado, Eugenio Anselmo Pessoa do; Martins, Marcelo Ramos, E-mail: andrericardopinheiro@usp.br, E-mail: eugenio.prado@labrisco.usp.br, E-mail: mrmatins@usp.br [Universidade de Sao Paulo (LABRISCO/USP), Sao Paulo, SP (Brazil). Lab. de Análise, Avaliação e Gerenciamento de Risco

2017-07-01

This article will discuss the preliminary results of an evaluation methodology for the analysis and quantification of manual character errors (human), by monitoring cognitive parameters and skill levels in the operation of a complex control system based on parameters provided by a eye monitoring equipment (Eye Tracker). The research was conducted using a simulator (game) that plays concepts of operation of a nuclear reactor with a split sample for evaluation of aspects of learning, knowledge and standard operating within the context addressed. bridge operators were monitored using the EYE TRACKING, eliminating the presence of the analyst in the evaluation of the operation, allowing the analysis of the results by means of multivariate statistical techniques within the scope of system reliability. The experiments aim to observe state change situations such as stops and scheduled departures, incidents assumptions and common operating characteristics. Preliminary results of this research object indicate that technical and cognitive aspects can contribute to improving the reliability of the available techniques in human reliability, making them more realistic both in the context of quantitative approaches to regulatory and training purposes, as well as reduced incidence of human error. (author)

Uncertainty and sensitivity analysis applied to coupled code calculations for a VVER plant transient

International Nuclear Information System (INIS)

Langenbuch, S.; Krzykacz-Hausmann, B.; Schmidt, K. D.

2004-01-01

The development of coupled codes, combining thermal-hydraulic system codes and 3D neutron kinetics, is an important step to perform best-estimate plant transient calculations. It is generally agreed that the application of best-estimate methods should be supplemented by an uncertainty and sensitivity analysis to quantify the uncertainty of the results. The paper presents results from the application of the GRS uncertainty and sensitivity method for a VVER-440 plant transient, which was already studied earlier for the validation of coupled codes. For this application, the main steps of the uncertainty method are described. Typical results of the method applied to the analysis of the plant transient by several working groups using different coupled codes are presented and discussed The results demonstrate the capability of an uncertainty and sensitivity analysis. (authors)

Study of fieldbus technology confiability when applied in a Sterilization plant control and safety systems

International Nuclear Information System (INIS)

Karma, D.; Sampa, M.H.O.; Rela, P.R.

2001-01-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible the application of that process, in 1960, also in the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides news applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. This paper show preliminary study about confiability in systems using Fieldbus technology. This technology was simulated in sterilization plant control and safety systems and the fail probability was quantified using Fail Tree Analysis Method. Fieldbus technology can be used in sterilization plants because the confiability in this systems is like PLCs and relays systems, was the conclusion

XML: How It Will Be Applied to Digital Library Systems.

Science.gov (United States)

Kim, Hyun-Hee; Choi, Chang-Seok

2000-01-01

Shows how XML is applied to digital library systems. Compares major features of XML with those of HTML and describes an experimental XML-based metadata retrieval system, which is based on the Dublin Core and is designed as a subsystem of the Korean Virtual Library and Information System (VINIS). (Author/LRW)

Analysis of concrete beams using applied element method

Science.gov (United States)

Lincy Christy, D.; Madhavan Pillai, T. M.; Nagarajan, Praveen

2018-03-01

The Applied Element Method (AEM) is a displacement based method of structural analysis. Some of its features are similar to that of Finite Element Method (FEM). In AEM, the structure is analysed by dividing it into several elements similar to FEM. But, in AEM, elements are connected by springs instead of nodes as in the case of FEM. In this paper, background to AEM is discussed and necessary equations are derived. For illustrating the application of AEM, it has been used to analyse plain concrete beam of fixed support condition. The analysis is limited to the analysis of 2-dimensional structures. It was found that the number of springs has no much influence on the results. AEM could predict deflection and reactions with reasonable degree of accuracy.

Environmental protection standards - from the point of view of systems analysis

Energy Technology Data Exchange (ETDEWEB)

Becker, K

1978-11-01

A project of the International Institute of Applied Systems Analysis (IIASA) in Laxenburg castle near Vienna is reviewed where standards for environmental protection are interpreted from the point of view of systems analysis. Some examples are given to show how results are influenced not only by technical and economic factors but also by psychological and political factors.

Environmental protection standards - from the point of view of systems analysis

International Nuclear Information System (INIS)

Becker, K.

1978-01-01

A project of the International Institute of Applied Systems Analysis (IIASA) in Laxenburg castle near Vienna is reviewed where standards for environmental protection are interpreted from the point of view of systems analysis. Some examples are given to show how results are influenced not only by technical and economic factors but also by psychological and political factors. (orig.) [de

Applying incomplete statistics to nonextensive systems with different q indices

International Nuclear Information System (INIS)

Nivanen, L.; Pezeril, M.; Wang, Q.A.; Mehaute, A. Le

2005-01-01

The nonextensive statistics based on the q-entropy Sq=--bar i=1v(pi-piq)1-q has been so far applied to systems in which the q value is uniformly distributed. For the systems containing different q's, the applicability of the theory is still a matter of investigation. The difficulty is that the class of systems to which the theory can be applied is actually limited by the usual nonadditivity rule of entropy which is no more valid when the systems contain non uniform distribution of q values. In this paper, within the framework of the so called incomplete information theory, we propose a more general nonadditivity rule of entropy prescribed by the zeroth law of thermodynamics. This new nonadditivity generalizes in a simple way the usual one and can be proved to lead uniquely to the q-entropy

Applying AI tools to operational space environmental analysis

Science.gov (United States)

Krajnak, Mike; Jesse, Lisa; Mucks, John

1995-01-01

The U.S. Air Force and National Oceanic Atmospheric Agency (NOAA) space environmental operations centers are facing increasingly complex challenges meeting the needs of their growing user community. These centers provide current space environmental information and short term forecasts of geomagnetic activity. Recent advances in modeling and data access have provided sophisticated tools for making accurate and timely forecasts, but have introduced new problems associated with handling and analyzing large quantities of complex data. AI (Artificial Intelligence) techniques have been considered as potential solutions to some of these problems. Fielding AI systems has proven more difficult than expected, in part because of operational constraints. Using systems which have been demonstrated successfully in the operational environment will provide a basis for a useful data fusion and analysis capability. Our approach uses a general purpose AI system already in operational use within the military intelligence community, called the Temporal Analysis System (TAS). TAS is an operational suite of tools supporting data processing, data visualization, historical analysis, situation assessment and predictive analysis. TAS includes expert system tools to analyze incoming events for indications of particular situations and predicts future activity. The expert system operates on a knowledge base of temporal patterns encoded using a knowledge representation called Temporal Transition Models (TTM's) and an event database maintained by the other TAS tools. The system also includes a robust knowledge acquisition and maintenance tool for creating TTM's using a graphical specification language. The ability to manipulate TTM's in a graphical format gives non-computer specialists an intuitive way of accessing and editing the knowledge base. To support space environmental analyses, we used TAS's ability to define domain specific event analysis abstractions. The prototype system defines

A study of software safety analysis system for safety-critical software

International Nuclear Information System (INIS)

Chang, H. S.; Shin, H. K.; Chang, Y. W.; Jung, J. C.; Kim, J. H.; Han, H. H.; Son, H. S.

2004-01-01

The core factors and requirements for the safety-critical software traced and the methodology adopted in each stage of software life cycle are presented. In concept phase, Failure Modes and Effects Analysis (FMEA) for the system has been performed. The feasibility evaluation of selected safety parameter was performed and Preliminary Hazards Analysis list was prepared using HAZOP(Hazard and Operability) technique. And the check list for management control has been produced via walk-through technique. Based on the evaluation of the check list, activities to be performed in requirement phase have been determined. In the design phase, hazard analysis has been performed to check the safety capability of the system with regard to safety software algorithm using Fault Tree Analysis (FTA). In the test phase, the test items based on FMEA have been checked for fitness guided by an accident scenario. The pressurizer low pressure trip algorithm has been selected to apply FTA method to software safety analysis as a sample. By applying CASE tool, the requirements traceability of safety critical system has been enhanced during all of software life cycle phases

International publication trends in the Journal of Applied Behavior Analysis: 2000-2014.

Science.gov (United States)

Martin, Neil T; Nosik, Melissa R; Carr, James E

2016-06-01

Dymond, Clarke, Dunlap, and Steiner's (2000) analysis of international publication trends in the Journal of Applied Behavior Analysis (JABA) from 1970 to 1999 revealed low numbers of publications from outside North America, leading the authors to express concern about the lack of international involvement in applied behavior analysis. They suggested that a future review would be necessary to evaluate any changes in international authorship in the journal. As a follow-up, we analyzed non-U.S. publication trends in the most recent 15 years of JABA and found similar results. We discuss potential reasons for the relative paucity of international authors and suggest potential strategies for increasing non-U.S. contributions to the advancement of behavior analysis. © 2015 Society for the Experimental Analysis of Behavior.

Applying Model Based Systems Engineering to NASA's Space Communications Networks

Science.gov (United States)

Bhasin, Kul; Barnes, Patrick; Reinert, Jessica; Golden, Bert

2013-01-01

System engineering practices for complex systems and networks now require that requirement, architecture, and concept of operations product development teams, simultaneously harmonize their activities to provide timely, useful and cost-effective products. When dealing with complex systems of systems, traditional systems engineering methodology quickly falls short of achieving project objectives. This approach is encumbered by the use of a number of disparate hardware and software tools, spreadsheets and documents to grasp the concept of the network design and operation. In case of NASA's space communication networks, since the networks are geographically distributed, and so are its subject matter experts, the team is challenged to create a common language and tools to produce its products. Using Model Based Systems Engineering methods and tools allows for a unified representation of the system in a model that enables a highly related level of detail. To date, Program System Engineering (PSE) team has been able to model each network from their top-level operational activities and system functions down to the atomic level through relational modeling decomposition. These models allow for a better understanding of the relationships between NASA's stakeholders, internal organizations, and impacts to all related entities due to integration and sustainment of existing systems. Understanding the existing systems is essential to accurate and detailed study of integration options being considered. In this paper, we identify the challenges the PSE team faced in its quest to unify complex legacy space communications networks and their operational processes. We describe the initial approaches undertaken and the evolution toward model based system engineering applied to produce Space Communication and Navigation (SCaN) PSE products. We will demonstrate the practice of Model Based System Engineering applied to integrating space communication networks and the summary of its

System based practice: a concept analysis

Directory of Open Access Journals (Sweden)

SHAHRAM YAZDANI

2016-04-01

Full Text Available Introduction: Systems-Based Practice (SBP is one of the six competencies introduced by the ACGME for physicians to provide high quality of care and also the most challenging of them in performance, training, and evaluation of medical students. This concept analysis clarifies the concept of SBP by identifying its components to make it possible to differentiate it from other similar concepts. For proper training of SBP and to ensure these competencies in physicians, it is necessary to have an operational definition, and SBP’s components must be precisely defined in order to provide valid and reliable assessment tools. Methods: Walker & Avant’s approach to concept analysis was performed in eight stages: choosing a concept, determining the purpose of analysis, identifying all uses of the concept, defining attributes, identifying a model case, identifying borderline, related, and contrary cases, identifying antecedents and consequences, and defining empirical referents. Results: Based on the analysis undertaken, the attributes of SBP includes knowledge of the system, balanced decision between patients’ need and system goals, effective role playing in interprofessional health care team, system level of health advocacy, and acting for system improvement. System thinking and a functional system are antecedents and system goals are consequences. A case model, as well as border, and contrary cases of SBP, has been introduced. Conclusion: The identification of SBP attributes in this study contributes to the body of knowledge in SBP and reduces the ambiguity of this concept to make it possible for applying it in training of different medical specialties. Also, it would be possible to develop and use more precise tools to evaluate SBP competency by using empirical referents of the analysis.

An applied study using systems engineering methods to prioritize green systems options

Energy Technology Data Exchange (ETDEWEB)

Lee, Sonya M [Los Alamos National Laboratory; Macdonald, John M [Los Alamos National Laboratory

2009-01-01

For many years, there have been questions about the effectiveness of applying different green solutions. If you're building a home and wish to use green technologies, where do you start? While all technologies sound promising, which will perform the best over time? All this has to be considered within the cost and schedule of the project. The amount of information available on the topic can be overwhelming. We seek to examine if Systems Engineering methods can be used to help people choose and prioritize technologies that fit within their project and budget. Several methods are used to gain perspective into how to select the green technologies, such as the Analytic Hierarchy Process (AHP) and Kepner-Tregoe. In our study, subjects applied these methods to analyze cost, schedule, and trade-offs. Results will document whether the experimental approach is applicable to defining system priorities for green technologies.

Model Proposition for the Fiscal Policies Analysis Applied in Economic Field

Directory of Open Access Journals (Sweden)

Larisa Preda

2007-05-01

Full Text Available This paper presents a study about fiscal policy applied in economic development. Correlations between macroeconomics and fiscal indicators signify the first steep in our analysis. Next step is a new model proposal for the fiscal and budgetary choices. This model is applied on the date of the Romanian case.

Automatic knowledge extraction in sequencing analysis with multiagent system and grid computing.

Science.gov (United States)

González, Roberto; Zato, Carolina; Benito, Rocío; Bajo, Javier; Hernández, Jesús M; De Paz, Juan F; Vera, Vicente; Corchado, Juan M

2012-12-01

Advances in bioinformatics have contributed towards a significant increase in available information. Information analysis requires the use of distributed computing systems to best engage the process of data analysis. This study proposes a multiagent system that incorporates grid technology to facilitate distributed data analysis by dynamically incorporating the roles associated to each specific case study. The system was applied to genetic sequencing data to extract relevant information about insertions, deletions or polymorphisms.

Automatic knowledge extraction in sequencing analysis with multiagent system and grid computing

Directory of Open Access Journals (Sweden)

González Roberto

2012-12-01

Full Text Available Advances in bioinformatics have contributed towards a significant increase in available information. Information analysis requires the use of distributed computing systems to best engage the process of data analysis. This study proposes a multiagent system that incorporates grid technology to facilitate distributed data analysis by dynamically incorporating the roles associated to each specific case study. The system was applied to genetic sequencing data to extract relevant information about insertions, deletions or polymorphisms.

SUBSURFACE VISUAL ALARM SYSTEM ANALYSIS

International Nuclear Information System (INIS)

D.W. Markman

2001-01-01

The ''Subsurface Fire Hazard Analysis'' (CRWMS M andO 1998, page 61), and the document, ''Title III Evaluation Report for the Surface and Subsurface Communication System'', (CRWMS M andO 1999a, pages 21 and 23), both indicate the installed communication system is adequate to support Exploratory Studies Facility (ESF) activities with the exception of the mine phone system for emergency notification purposes. They recommend the installation of a visual alarm system to supplement the page/party phone system The purpose of this analysis is to identify data communication highway design approaches, and provide justification for the selected or recommended alternatives for the data communication of the subsurface visual alarm system. This analysis is being prepared to document a basis for the design selection of the data communication method. This analysis will briefly describe existing data or voice communication or monitoring systems within the ESF, and look at how these may be revised or adapted to support the needed data highway of the subsurface visual alarm. system. The existing PLC communication system installed in subsurface is providing data communication for alcove No.5 ventilation fans, south portal ventilation fans, bulkhead doors and generator monitoring system. It is given that the data communication of the subsurface visual alarm system will be a digital based system. It is also given that it is most feasible to take advantage of existing systems and equipment and not consider an entirely new data communication system design and installation. The scope and primary objectives of this analysis are to: (1) Briefly review and describe existing available data communication highways or systems within the ESF. (2) Examine technical characteristics of an existing system to disqualify a design alternative is paramount in minimizing the number of and depth of a system review. (3) Apply general engineering design practices or criteria such as relative cost, and degree

A method for work modeling at complex systems: towards applying information systems in family health care units.

Science.gov (United States)

Jatobá, Alessandro; de Carvalho, Paulo Victor R; da Cunha, Amauri Marques

2012-01-01

Work in organizations requires a minimum level of consensus on the understanding of the practices performed. To adopt technological devices to support the activities in environments where work is complex, characterized by the interdependence among a large number of variables, understanding about how work is done not only takes an even greater importance, but also becomes a more difficult task. Therefore, this study aims to present a method for modeling of work in complex systems, which allows improving the knowledge about the way activities are performed where these activities do not simply happen by performing procedures. Uniting techniques of Cognitive Task Analysis with the concept of Work Process, this work seeks to provide a method capable of providing a detailed and accurate vision of how people perform their tasks, in order to apply information systems for supporting work in organizations.

Path Integration Applied to Structural Systems with Uncertain Properties

DEFF Research Database (Denmark)

Nielsen, Søren R.K.; Köylüoglu, H. Ugur

Path integration (cell-to-cell mapping) method is applied to evaluate the joint probability density function (jpdf) of the response of the structural systems, with uncertain properties, subject to white noise excitation. A general methodology to deal with uncertainties is outlined and applied...... to the friction controlled slip of a structure on a foundation where the friction coefficient is modelled as a random variable. Exact results derived using the total probability theorem are compared to the ones obtained via path integration....

Introduction to applied statistical signal analysis guide to biomedical and electrical engineering applications

CERN Document Server

Shiavi, Richard

2007-01-01

Introduction to Applied Statistical Signal Analysis is designed for the experienced individual with a basic background in mathematics, science, and computer. With this predisposed knowledge, the reader will coast through the practical introduction and move on to signal analysis techniques, commonly used in a broad range of engineering areas such as biomedical engineering, communications, geophysics, and speech.Introduction to Applied Statistical Signal Analysis intertwines theory and implementation with practical examples and exercises. Topics presented in detail include: mathematical

Graphical analysis of power systems for mobile robotics

Science.gov (United States)

Raade, Justin William

The field of mobile robotics places stringent demands on the power system. Energetic autonomy, or the ability to function for a useful operation time independent of any tether, refueling, or recharging, is a driving force in a robot designed for a field application. The focus of this dissertation is the development of two graphical analysis tools, namely Ragone plots and optimal hybridization plots, for the design of human scale mobile robotic power systems. These tools contribute to the intuitive understanding of the performance of a power system and expand the toolbox of the design engineer. Ragone plots are useful for graphically comparing the merits of different power systems for a wide range of operation times. They plot the specific power versus the specific energy of a system on logarithmic scales. The driving equations in the creation of a Ragone plot are derived in terms of several important system parameters. Trends at extreme operation times (both very short and very long) are examined. Ragone plot analysis is applied to the design of several power systems for high-power human exoskeletons. Power systems examined include a monopropellant-powered free piston hydraulic pump, a gasoline-powered internal combustion engine with hydraulic actuators, and a fuel cell with electric actuators. Hybrid power systems consist of two or more distinct energy sources that are used together to meet a single load. They can often outperform non-hybrid power systems in low duty-cycle applications or those with widely varying load profiles and long operation times. Two types of energy sources are defined: engine-like and capacitive. The hybridization rules for different combinations of energy sources are derived using graphical plots of hybrid power system mass versus the primary system power. Optimal hybridization analysis is applied to several power systems for low-power human exoskeletons. Hybrid power systems examined include a fuel cell and a solar panel coupled with

Fractional-Order Nonlinear Systems Modeling, Analysis and Simulation

CERN Document Server

Petráš, Ivo

2011-01-01

"Fractional-Order Nonlinear Systems: Modeling, Analysis and Simulation" presents a study of fractional-order chaotic systems accompanied by Matlab programs for simulating their state space trajectories, which are shown in the illustrations in the book. Description of the chaotic systems is clearly presented and their analysis and numerical solution are done in an easy-to-follow manner. Simulink models for the selected fractional-order systems are also presented. The readers will understand the fundamentals of the fractional calculus, how real dynamical systems can be described using fractional derivatives and fractional differential equations, how such equations can be solved, and how to simulate and explore chaotic systems of fractional order. The book addresses to mathematicians, physicists, engineers, and other scientists interested in chaos phenomena or in fractional-order systems. It can be used in courses on dynamical systems, control theory, and applied mathematics at graduate or postgraduate level. ...

Study on shielded pump system failure analysis method based on Bayesian network

International Nuclear Information System (INIS)

Bao Yilan; Huang Gaofeng; Tong Lili; Cao Xuewu

2012-01-01

This paper applies Bayesian network to the system failure analysis, with an aim to improve knowledge representation of the uncertainty logic and multi-fault states in system failure analysis. A Bayesian network for shielded pump failure analysis is presented, conducting fault parameter learning, updating Bayesian network parameter based on new samples. Finally, through the Bayesian network inference, vulnerability in this system, the largest possible failure modes, and the fault probability are obtained. The powerful ability of Bayesian network to analyze system fault is illustrated by examples. (authors)

Applied Behavior Analysis Is a Science And, Therefore, Progressive

Science.gov (United States)

Leaf, Justin B.; Leaf, Ronald; McEachin, John; Taubman, Mitchell; Ala'i-Rosales, Shahla; Ross, Robert K.; Smith, Tristram; Weiss, Mary Jane

2016-01-01

Applied behavior analysis (ABA) is a science and, therefore, involves progressive approaches and outcomes. In this commentary we argue that the spirit and the method of science should be maintained in order to avoid reductionist procedures, stifled innovation, and rote, unresponsive protocols that become increasingly removed from meaningful…

Global Appearance Applied to Visual Map Building and Path Estimation Using Multiscale Analysis

Directory of Open Access Journals (Sweden)

Francisco Amorós

2014-01-01

Full Text Available In this work we present a topological map building and localization system for mobile robots based on global appearance of visual information. We include a comparison and analysis of global-appearance techniques applied to wide-angle scenes in retrieval tasks. Next, we define multiscale analysis, which permits improving the association between images and extracting topological distances. Then, a topological map-building algorithm is proposed. At first, the algorithm has information only of some isolated positions of the navigation area in the form of nodes. Each node is composed of a collection of images that covers the complete field of view from a certain position. The algorithm solves the node retrieval and estimates their spatial arrangement. With these aims, it uses the visual information captured along some routes that cover the navigation area. As a result, the algorithm builds a graph that reflects the distribution and adjacency relations between nodes (map. After the map building, we also propose a route path estimation system. This algorithm takes advantage of the multiscale analysis. The accuracy in the pose estimation is not reduced to the nodes locations but also to intermediate positions between them. The algorithms have been tested using two different databases captured in real indoor environments under dynamic conditions.

Reflections of the social environment in chimpanzee memory: applying rational analysis beyond humans

Science.gov (United States)

Marewski, Julian N.; Schooler, Lael J.; Gilby, Ian C.

2016-01-01

In cognitive science, the rational analysis framework allows modelling of how physical and social environments impose information-processing demands onto cognitive systems. In humans, for example, past social contact among individuals predicts their future contact with linear and power functions. These features of the human environment constrain the optimal way to remember information and probably shape how memory records are retained and retrieved. We offer a primer on how biologists can apply rational analysis to study animal behaviour. Using chimpanzees (Pan troglodytes) as a case study, we modelled 19 years of observational data on their social contact patterns. Much like humans, the frequency of past encounters in chimpanzees linearly predicted future encounters, and the recency of past encounters predicted future encounters with a power function. Consistent with the rational analyses carried out for human memory, these findings suggest that chimpanzee memory performance should reflect those environmental regularities. In re-analysing existing chimpanzee memory data, we found that chimpanzee memory patterns mirrored their social contact patterns. Our findings hint that human and chimpanzee memory systems may have evolved to solve similar information-processing problems. Overall, rational analysis offers novel theoretical and methodological avenues for the comparative study of cognition. PMID:27853606

Human-Machine Systems concepts applied to Control Engineering Education

OpenAIRE

Marangé , Pascale; Gellot , François; Riera , Bernard

2008-01-01

International audience; In this paper, we interest us to Human-Machine Systems (HMS) concepts applied to Education. It is shown how the HMS framework enables to propose original solution in matter of education in the field of control engineering. We focus on practical courses on control of manufacturing systems. The proposed solution is based on an original use of real and large-scale systems instead of simulation. The main idea is to enable the student, whatever his/her level to control the ...

An analysis methodology for impact of new technology in complex sociotechnical systems

CSIR Research Space (South Africa)

Oosthuizen, R

2013-11-01

Full Text Available in support of Systems Engineering efforts, which is difficult with complex Sociotechnical Systems. Cognitive Work Analysis and System Dynamics are two complementary approaches that can be applied within this context. The products of these methods assist...

Alternative methods for the seismic analysis of piping systems

International Nuclear Information System (INIS)

Anon.

1993-01-01

This document is a review of 12 methods and criteria for the seismic analysis of piping systems. Each of the twelve chapters in this document cover the important technical aspects of a given method. The technical aspects presented are those the Subcommittee on Dynamic Stress Criteria believe important to the application of the method, and should not be considered as a positive or negative endorsement for any of the methods. There are many variables in an analysis of a piping system that can influence the selection of the analysis method and criteria to be applied. These variable include system configuration, technical issues, precedent, licensing considerations, and regulatory acceptance. They must all be considered in selecting the appropriate seismic analysis method and criteria. This is relevant for nuclear power plants

Application of NASA Kennedy Space Center System Assurance Analysis methodology to nuclear power plant systems designs

International Nuclear Information System (INIS)

Page, D.W.

1985-01-01

In May of 1982, the Kennedy Space Center (KSC) entered into an agreement with the NRC to conduct a study to demonstrate the feasibility and practicality of applying the KSC System Assurance Analysis (SAA) methodology to nuclear power plant systems designs. North Carolina's Duke Power Company expressed an interest in the study and proposed the nuclear power facility at CATAWBA for the basis of the study. In joint meetings of KSC and Duke Power personnel, an agreement was made to select two CATAWBA systems, the Containment Spray System and the Residual Heat Removal System, for the analyses. Duke Power provided KSC with a full set of Final Safety Analysis Reports (FSAR) as well as schematics for the two systems. During Phase I of the study the reliability analyses of the SAA were performed. During Phase II the hazard analyses were performed. The final product of Phase II is a handbook for implementing the SAA methodology into nuclear power plant systems designs. The purpose of this paper is to describe the SAA methodology as it applies to nuclear power plant systems designs and to discuss the feasibility of its application. (orig./HP)

Application Research of Fault Tree Analysis in Grid Communication System Corrective Maintenance

Science.gov (United States)

Wang, Jian; Yang, Zhenwei; Kang, Mei

2018-01-01

This paper attempts to apply the fault tree analysis method to the corrective maintenance field of grid communication system. Through the establishment of the fault tree model of typical system and the engineering experience, the fault tree analysis theory is used to analyze the fault tree model, which contains the field of structural function, probability importance and so on. The results show that the fault tree analysis can realize fast positioning and well repairing of the system. Meanwhile, it finds that the analysis method of fault tree has some guiding significance to the reliability researching and upgrading f the system.

Complex, Dynamic Systems: A New Transdisciplinary Theme for Applied Linguistics?

Science.gov (United States)

Larsen-Freeman, Diane

2012-01-01

In this plenary address, I suggest that Complexity Theory has the potential to contribute a transdisciplinary theme to applied linguistics. Transdisciplinary themes supersede disciplines and spur new kinds of creative activity (Halliday 2001 [1990]). Investigating complex systems requires researchers to pay attention to system dynamics. Since…

Stability analysis of linear switching systems with time delays

International Nuclear Information System (INIS)

Li Ping; Zhong Shouming; Cui Jinzhong

2009-01-01

The issue of stability analysis of linear switching system with discrete and distributed time delays is studied in this paper. An appropriate switching rule is applied to guarantee the stability of the whole switching system. Our results use a Riccati-type Lyapunov functional under a condition on the time delay. So, switching systems with mixed delays are developed. A numerical example is given to illustrate the effectiveness of our results.

Analysis of combustion turbine inlet air cooling systems applied to an operating cogeneration power plant

International Nuclear Information System (INIS)

Chacartegui, R.; Jimenez-Espadafor, F.; Sanchez, D.; Sanchez, T.

2008-01-01

In this work, combustion turbine inlet air cooling (CTIAC) systems are analyzed from an economic outlook, their effects on the global performance parameters and the economic results of the power plant. The study has been carried out on a combined cogeneration system, composed of a General Electric PG 6541 gas turbine and a heat recovery steam generator. The work has been divided into three parts. First, a revision of the present CTIAC technologies is shown, their effects on power plant performance and evaluation of the associated investment and maintenance costs. In a second phase of the work, the cogeneration plant was modelled with the objective of evaluating the power increase and the effects on the generated steam and the thermal oil. The cogeneration power plant model was developed, departing from the recorded operational data of the plant in 2005 and the gas turbine model offered by General Electric, to take into consideration that, in 2000, the gas turbine had been remodelled and the original performance curves should be corrected. The final objective of this model was to express the power plant main variables as a function of the gas turbine intake temperature, pressure and relative humidity. Finally, this model was applied to analyze the economic interest of different intake cooling systems, in different operative ranges and with different cooling capacities

Three-dimensional integrated CAE system applying computer graphic technique

International Nuclear Information System (INIS)

Kato, Toshisada; Tanaka, Kazuo; Akitomo, Norio; Obata, Tokayasu.

1991-01-01

A three-dimensional CAE system for nuclear power plant design is presented. This system utilizes high-speed computer graphic techniques for the plant design review, and an integrated engineering database for handling the large amount of nuclear power plant engineering data in a unified data format. Applying this system makes it possible to construct a nuclear power plant using only computer data from the basic design phase to the manufacturing phase, and it increases the productivity and reliability of the nuclear power plants. (author)

Application of System Dynamics Methodology in Population Analysis

Directory of Open Access Journals (Sweden)

August Turina

2009-09-01

Full Text Available The goal of this work is to present the application of system dynamics and system thinking, as well as the advantages and possible defects of this analytic approach, in order to improve the analysis of complex systems such as population and, thereby, to monitor more effectively the underlying causes of migrations. This methodology has long been present in interdisciplinary scientific circles, but its scientific contribution has not been sufficiently applied in analysis practice in Croatia. Namely, the major part of system analysis is focused on detailed complexity rather than on dynamic complexity. Generally, the science of complexity deals with emergence, innovation, learning and adaptation. Complexity is viewed according to the number of system components, or through a number of combinations that must be continually analyzed in order to understand and consequently provide adequate decisions. Simulations containing thousands of variables and complex arrays of details distract overall attention from the basic cause patterns and key inter-relations emerging and prevailing within an analyzed population. Systems thinking offers a holistic and integral perspective for observation of the world.

Applying the system viability framework for cross-scalar governance of nested social-ecological systems in the Guiana Shield, South America

Directory of Open Access Journals (Sweden)

Andrea Berardi

2015-09-01

Full Text Available Linking and analyzing governance of natural resources at different scales requires the development of a conceptual framework for analyzing social-ecological systems that can be easily applied by a range of stakeholders whose interests lie at different scales, but where the results of the analysis can be compared in a straightforward way. We outline the system viability framework, which allows participants to characterize a range of strategies in response to environment challenges for maintaining the long-term survival of their particular system of interest. Working in the Guiana Shield, South America, and with a range of local, regional, and international stakeholders, our aim was to use system viability to (1 investigate synergies and conflicts between distinct scales of governance, (2 identify scale-related challenges, and (3 test the framework as a conceptual tool for supporting cross-scalar analysis for environmental governance. At the international and national levels, a number of civil society organizations explored system viability indicators that would measure the successful implementation of governance mechanisms relevant to sustainable development and natural resource management. At the local level, we used participatory video and photography within two indigenous territories to enable local participants to identify indicators of viability within community governance systems. A grounded theory approach was then used to identify common themes across the different scales of analysis. Five key themes emerged: land rights, leadership, partnerships, lifestyle, and identity. We found that although most categories of interest were theoretically aligned across scales, all perceived systems of interest were struggling to face up to various cross-scalar challenges undermining different system viability responses. In conclusion, we highlight how the system viability framework can be used with a disparate variety of stakeholders as a practical

Applied Systemic Theory and Educational Psychology: Can the Twain Ever Meet?

Science.gov (United States)

Pellegrini, Dario W.

2009-01-01

This article reflects on the potential benefits of applying systemic theory to the work of educational psychologists (EPs). It reviews developments in systemic thinking over time, and discusses the differences between more directive "first order" versus collaborative "second order" approaches. It considers systemic theories and…

A gas conditioning and analysis system

International Nuclear Information System (INIS)

Busch, F.R.

1974-01-01

A system for carrying out a rapid analysis of explosive gas-mixtures is described. This system comprises a conduit connecting a sample taking point to a detection chamber, said chamber containing a mass of liquid into which the gas sample is discharged and being provided with a detecting unit for analyzing gases and with separate gas exit and liquid exit. The liquid is sent to a level-regulating chamber, whereas said gas exit sends the gas to a gas-stopping chamber which is in turn, connected to the conduit leading to a discharge point, and a vacuum pump for drawing up the gas sample into the system. This can be apply to nuclear power stations [fr

Dimensional Analysis with space discrimination applied to Fickian difussion phenomena

International Nuclear Information System (INIS)

Diaz Sanchidrian, C.; Castans, M.

1989-01-01

Dimensional Analysis with space discrimination is applied to Fickian difussion phenomena in order to transform its partial differen-tial equations into ordinary ones, and also to obtain in a dimensionl-ess fom the Ficks second law. (Author)

IAEA-ASSET`s root cause analysis method applied to sodium leakage incident at Monju

Energy Technology Data Exchange (ETDEWEB)

Watanabe, Norio; Hirano, Masashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-08-01

The present study applied the ASSET (Analysis and Screening of Safety Events Team) methodology (This method identifies occurrences such as component failures and operator errors, identifies their respective direct/root causes and determines corrective actions.) to the analysis of the sodium leakage incident at Monju, based on the published reports by mainly the Science and Technology Agency, aiming at systematic identification of direct/root causes and corrective actions, and discussed the effectiveness and problems of the ASSET methodology. The results revealed the following seven occurrences and showed the direct/root causes and contributing factors for the individual occurrences: failure of thermometer well tube, delayed reactor manual trip, inadequate continuous monitoring of leakage, misjudgment of leak rate, non-required operator action (turbine trip), retarded emergency sodium drainage, and retarded securing of ventilation system. Most of the occurrences stemmed from deficiencies in emergency operating procedures (EOPs), which were mainly caused by defects in the EOP preparation process and operator training programs. The corrective actions already proposed in the published reports were reviewed, identifying issues to be further studied. Possible corrective actions were discussed for these issues. The present study also demonstrated the effectiveness of the ASSET methodology and pointed out some problems, for example, in delineating causal relations among occurrences, for applying it to the detail and systematic analysis of event direct/root causes and determination of concrete measures. (J.P.N.)

A comparative analysis of national food recall systems

Directory of Open Access Journals (Sweden)

Gaetano Liuzzo

2013-12-01

Full Text Available Food recall and withdrawal is a fundamental tool for risk management and different countries stated the mandatory application of a system for food; the present work is an analysis of different systems applied in different countries. The main objective of analysed systems is the consumer’s health protection through an audit system and the application of system to rapidly recall/withdraw food on the part of producers. The comparative analysis of different national systems [i.e. European Union (EU, Australia, Canada, US and China] shows differences both of the terminological and legal aspects; the words recall and withdrawal have different meaning in EU legislation than in other counties’ legislations; from a legal point of view, two main recall/withdrawal systems could be identified: a mandatory one (EU and China and a voluntary one (USA, Canada and Australia; all the investigated systems have a co-operative approach between authority and food business operator, but different functions on their respective roles could be identified.

Applying of USB interface technique in nuclear spectrum acquisition system

International Nuclear Information System (INIS)

Zhou Jianbin; Huang Jinhua

2004-01-01

This paper introduces applying of USB technique and constructing nuclear spectrum acquisition system via PC's USB interface. The authors choose the USB component USB100 module and the W77E58μc to do the key work. It's easy to apply USB interface technique, when USB100 module is used. USB100 module can be treated as a common I/O component for the μc controller, and can be treated as a communication interface (COM) when connected to PC' USB interface. It's easy to modify the PC's program for the new system with USB100 module. The authors can smoothly change from ISA, RS232 bus to USB bus. (authors)

Modeling and analysis of real-time and embedded systems with UML and MARTE developing cyber-physical systems

CERN Document Server

Selic, Bran

2013-01-01

Modeling and Analysis of Real-Time and Embedded Systems with UML and MARTE explains how to apply the complex MARTE standard in practical situations. This approachable reference provides a handy user guide, illustrating with numerous examples how you can use MARTE to design and develop real-time and embedded systems and software. Expert co-authors Bran Selic and Sébastien Gérard lead the team that drafted and maintain the standard and give you the tools you need apply MARTE to overcome the limitations of cyber-physical systems. The functional sophistication required of modern cyber-physical

Informational analysis involving application of complex information system

Science.gov (United States)

Ciupak, Clébia; Vanti, Adolfo Alberto; Balloni, Antonio José; Espin, Rafael

The aim of the present research is performing an informal analysis for internal audit involving the application of complex information system based on fuzzy logic. The same has been applied in internal audit involving the integration of the accounting field into the information systems field. The technological advancements can provide improvements to the work performed by the internal audit. Thus we aim to find, in the complex information systems, priorities for the work of internal audit of a high importance Private Institution of Higher Education. The applied method is quali-quantitative, as from the definition of strategic linguistic variables it was possible to transform them into quantitative with the matrix intersection. By means of a case study, where data were collected via interview with the Administrative Pro-Rector, who takes part at the elaboration of the strategic planning of the institution, it was possible to infer analysis concerning points which must be prioritized at the internal audit work. We emphasize that the priorities were identified when processed in a system (of academic use). From the study we can conclude that, starting from these information systems, audit can identify priorities on its work program. Along with plans and strategic objectives of the enterprise, the internal auditor can define operational procedures to work in favor of the attainment of the objectives of the organization.

Cyber Security Analysis by Attack Trees for a Reactor Protection System

International Nuclear Information System (INIS)

Park, Gee-Yong; Lee, Cheol Kwon; Choi, Jong Gyun; Kim, Dong Hoon; Lee, Young Jun; Kwon, Kee-Choon

2008-01-01

As nuclear facilities are introducing digital systems, the cyber security becomes an emerging topic to be analyzed and resolved. The domestic and other nation's regulatory bodies notice this topic and are preparing an appropriate guidance. The nuclear industry where new construction or upgrade of I and C systems is planned is analyzing and establishing a cyber security. A risk-based analysis for the cyber security has been performed in the KNICS (Korea Nuclear I and C Systems) project where the cyber security analysis has been applied to a reactor protection system (RPS). In this paper, the cyber security analysis based on the attack trees is proposed for the KNICS RPS

Beyond Time out and Table Time: Today's Applied Behavior Analysis for Students with Autism

Science.gov (United States)

Boutot, E. Amanda; Hume, Kara

2012-01-01

Recent mandates related to the implementation of evidence-based practices for individuals with autism spectrum disorder (ASD) require that autism professionals both understand and are able to implement practices based on the science of applied behavior analysis (ABA). The use of the term "applied behavior analysis" and its related concepts…

Conversation Analysis and Applied Linguistics.

Science.gov (United States)

Schegloff, Emanuel A.; Koshik, Irene; Jacoby, Sally; Olsher, David

2002-01-01

Offers biographical guidance on several major areas of conversation-analytic work--turn-taking, repair, and word selection--and indicates past or potential points of contact with applied linguistics. Also discusses areas of applied linguistic work. (Author/VWL)

An overview of decision tree applied to power systems

DEFF Research Database (Denmark)

Liu, Leo; Rather, Zakir Hussain; Chen, Zhe

2013-01-01

The corrosive volume of available data in electric power systems motivate the adoption of data mining techniques in the emerging field of power system data analytics. The mainstream of data mining algorithm applied to power system, Decision Tree (DT), also named as Classification And Regression...... Tree (CART), has gained increasing interests because of its high performance in terms of computational efficiency, uncertainty manageability, and interpretability. This paper presents an overview of a variety of DT applications to power systems for better interfacing of power systems with data...... analytics. The fundamental knowledge of CART algorithm is also introduced which is then followed by examples of both classification tree and regression tree with the help of case study for security assessment of Danish power system....

SCADA system with predictive controller applied to irrigation canals

OpenAIRE

Figueiredo, João; Botto, Miguel; Rijo, Manuel

2013-01-01

This paper applies a model predictive controller (MPC) to an automatic water canal with sensors and actuators controlled by a network (programmable logic controller), and supervised by a SCADA system (supervisory control and a data acquisition). This canal is composed by a set of distributed sub-systems that control the water level in each canal pool, constrained by discharge gates (control variables) and water off-takes (disturbances). All local controllers are available through an industria...

Applied hydraulic transients

CERN Document Server

Chaudhry, M Hanif

2014-01-01

This book covers hydraulic transients in a comprehensive and systematic manner from introduction to advanced level and presents various methods of analysis for computer solution. The field of application of the book is very broad and diverse and covers areas such as hydroelectric projects, pumped storage schemes, water-supply systems, cooling-water systems, oil pipelines and industrial piping systems. Strong emphasis is given to practical applications, including several case studies, problems of applied nature, and design criteria. This will help design engineers and introduce students to real-life projects. This book also: ·         Presents modern methods of analysis suitable for computer analysis, such as the method of characteristics, explicit and implicit finite-difference methods and matrix methods ·         Includes case studies of actual projects ·         Provides extensive and complete treatment of governed hydraulic turbines ·         Presents design charts, desi...

Rethinking the process of operational research & systems analysis

CERN Document Server

Tomlinson, R

1984-01-01

Invited contributions from distinguished practitioners and methodologists of operational research and applied systems analysis which represent a true state-of-the-art and which provide, perhaps for the first time, a coherent, interlocking, set of ideas which may be considered the foundations of the subject as a science in its own right.

Inclusive Elementary Classroom Teacher Knowledge of and Attitudes toward Applied Behavior Analysis and Autism Spectrum Disorder and Their Use of Applied Behavior Analysis

Science.gov (United States)

McCormick, Jennifer A.

2011-01-01

The purpose of this study was to examine inclusive elementary teacher knowledge and attitude toward Autism Spectrum Disorder (ASD) and applied behavior analysis (ABA) and their use of ABA. Furthermore, this study examined if knowledge and attitude predicted use of ABA. A survey was developed and administered through a web-based program. Of the…

Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

International Nuclear Information System (INIS)

Upadhyaya, B.R.; Yan, W.; Henry, G.

1999-01-01

A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

Energy Technology Data Exchange (ETDEWEB)

Upadhyaya, B.R.; Yan, W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering; Behravesh, M.M. [Electric Power Research Institute, Palo Alto, CA (United States); Henry, G. [EPRI NDE Center, Charlotte, NC (United States)

1999-09-01

A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

Multi-scenario electromagnetic load analysis for CFETR and EAST magnet systems

Energy Technology Data Exchange (ETDEWEB)

Xu, Weiwei; Liu, Xufeng, E-mail: lxf@ipp.ac.cn; Du, Shuangsong; Song, Yuntao

2017-01-15

Highlights: • A multi-scenario force-calculating simulator for Tokamak magnet system is developed using interaction matrix method. • The simulator is applied to EM analysis of CFETR and EAST magnet system. • The EM loads on CFETR magnet coils at different typical scenarios and the EM loads acting on magnet system of EAST as function of time for different shots are analyzed with the simulator. • Results indicate that the approach can be conveniently used for multi-scenario and real-time EM analysis of Tokamak magnet system. - Abstract: A technology for electromagnetic (EM) analysis of the current-carrying components in tokamaks has been proposed recently (Rozov, 2013; Rozov and Alekseev, 2015). According to this method, the EM loads can be obtained by a linear transform of given currents using the pre-computed interaction matrix. Based on this technology, a multi-scenario force-calculating simulator for Tokamak magnet system is developed using Fortran programming in this paper. And the simulator is applied to EM analysis of China Fusion Engineering Test Reactor (CFETR) and Experimental Advanced Superconducting Tokamak (EAST) magnet system. The pre-computed EM interaction matrices of CFETR and EAST magnet system are implanted into the simulator, then the EM loads on CFETR magnet coils at different typical scenarios are evaluated with the simulator, and the comparison of the results with ANSYS method results validates the efficiency and accuracy of the method. Using the simulator, the EM loads acting on magnet system of EAST as function of time for different shots are further analyzed, and results indicate that the approach can be conveniently used for the real-time EM analysis of Tokamak magnet system.

Data Processing and Analysis Systems for JT-60U

International Nuclear Information System (INIS)

Matsuda, T.; Totsuka, T.; Tsugita, T.; Oshima, T.; Sakata, S.; Sato, M.; Iwasaki, K.

2002-01-01

The JT-60U data processing system is a large computer complex gradually modernized by utilizing progressive computer and network technology. A main computer using state-of-the-art CMOS technology can handle ∼550 MB of data per discharge. A gigabit ethernet switch with FDDI ports has been introduced to cope with the increase of handling data. Workstation systems with VMEbus serial highway drivers for CAMAC have been developed and used to replace many minicomputer systems. VMEbus-based fast data acquisition systems have also been developed to enlarge and replace a minicomputer system for mass data.The JT-60U data analysis system is composed of a JT-60U database server and a JT-60U analysis server, which are distributed UNIX servers. The experimental database is stored in the 1TB RAID disk of the JT-60U database server and is composed of ZENKEI and diagnostic databases. Various data analysis tools are available on the JT-60U analysis server. For the remote collaboration, technical features of the data analysis system have been applied to the computer system to access JT-60U data via the Internet. Remote participation in JT-60U experiments has been successfully conducted since 1996

Statistical analysis of the Ft. Calhoun reactor coolant pump system

International Nuclear Information System (INIS)

Patel, Bimal; Heising, C.D.

1997-01-01

In engineering science, statistical quality control techniques have traditionally been applied to control manufacturing processes. An application to commercial nuclear power plant maintenance and control is presented that can greatly improve plant safety. As a demonstration of such an approach, a specific system is analyzed: the reactor coolant pumps (RCPs) of the Ft. Calhoun nuclear power plant. This research uses capability analysis, Shewhart X-bar, R charts, canonical correlation methods, and design of experiments to analyze the process for the state of statistical control. The results obtained show that six out of ten parameters are under control specification limits and four parameters are not in the state of statistical control. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators. Such a system would provide operators with ample time to respond to possible emergency situations and thus improve plant safety and reliability. (Author)

Automated SEM Modal Analysis Applied to the Diogenites

Science.gov (United States)

Bowman, L. E.; Spilde, M. N.; Papike, James J.

1996-01-01

Analysis of volume proportions of minerals, or modal analysis, is routinely accomplished by point counting on an optical microscope, but the process, particularly on brecciated samples such as the diogenite meteorites, is tedious and prone to error by misidentification of very small fragments, which may make up a significant volume of the sample. Precise volume percentage data can be gathered on a scanning electron microscope (SEM) utilizing digital imaging and an energy dispersive spectrometer (EDS). This form of automated phase analysis reduces error, and at the same time provides more information than could be gathered using simple point counting alone, such as particle morphology statistics and chemical analyses. We have previously studied major, minor, and trace-element chemistry of orthopyroxene from a suite of diogenites. This abstract describes the method applied to determine the modes on this same suite of meteorites and the results of that research. The modal abundances thus determined add additional information on the petrogenesis of the diogenites. In addition, low-abundance phases such as spinels were located for further analysis by this method.

76 FR 76215 - Privacy Act; System of Records: State-78, Risk Analysis and Management Records

Science.gov (United States)

2011-12-06

... a system of records, Risk Analysis and Management Records, State-78, pursuant to the provisions of... INFORMATION: The Department of State proposes that the new system will be ``Risk Analysis and Management.... These standard routine uses apply to State-78, Risk Analysis and Management Records. POLICIES AND...

Applied mathematics

International Nuclear Information System (INIS)

Nedelec, J.C.

1988-01-01

The 1988 progress report of the Applied Mathematics center (Polytechnic School, France), is presented. The research fields of the Center are the scientific calculus, the probabilities and statistics and the video image synthesis. The research topics developed are: the analysis of numerical methods, the mathematical analysis of the physics and mechanics fundamental models, the numerical solution of complex models related to the industrial problems, the stochastic calculus and the brownian movement, the stochastic partial differential equations, the identification of the adaptive filtering parameters, the discrete element systems, statistics, the stochastic control and the development, the image synthesis techniques for education and research programs. The published papers, the congress communications and the thesis are listed [fr

Space shuttle/food system study. Volume 2, appendix E: Alternate flight systems analysis

Science.gov (United States)

1974-01-01

The functional requirements of stowage, preparation, serving, consumption, and cleanup were applied to each of the five food mixes selected for study in terms of the overall design of the space shuttle food system. The analysis led to a definition of performance requirements for each food mix, along with a definition of equipment to meet those requirements. Weight and volume data for all five systems, in terms of food and packaging, support equipment, and galley installation penalties, are presented.

Development of nonlinear dynamic analysis program for nuclear piping systems

International Nuclear Information System (INIS)

Kamichika, Ryoichi; Izawa, Masahiro; Yamadera, Masao

1980-01-01

In the design for nuclear power piping, pipe-whip protection shall be considered in order to keep the function of safety related system even when postulated piping rupture occurs. This guideline was shown in U.S. Regulatory Guide 1.46 for the first time and has been applied in Japanese nuclear power plants. In order to analyze the dynamic behavior followed by pipe rupture, nonlinear analysis is required for the piping system including restraints which play the role of an energy absorber. REAPPS (Rupture Effective Analysis of Piping Systems) has been developed for this purpose. This program can be applied to general piping systems having branches etc. Pre- and post- processors are prepared in this program in order to easily input the data for the piping engineer and show the results optically by use of a graphic display respectively. The piping designer can easily solve many problems in his daily work by use of this program. This paper describes about the theoretical background and functions of this program and shows some examples. (author)

Development of X-ray diffractometers XD-D1 AI qualitative analysis system

International Nuclear Information System (INIS)

Arai, Hiroshi; Uota, Atsushi; Ishida, Hidenobu

1994-01-01

Qualitative X-ray diffraction is a very important analytical method, however, it is also very difficult to perform and needs some special skills. Also, the analysis accuracy depends on the operators' knowledge of qualitative analysis. In order that even a beginner analyst can obtain accurate results, we have developed the 'XD-D1 AI Qualitative Analysis System'. This system can support analytical operations with the experts' knowledge made available by AI techniques. Systematizing the experts' knowledge, we applied the system to our expert shell 'GENZO-I/PRO'. This system enabled a beginner analyst to get the same results as a specialist would get. In this paper, we will describe the process of system design, system construction and an example analysis. (author)

Applying model predictive control to power system frequency control

OpenAIRE

Ersdal, AM; Imsland, L; Cecilio, IM; Fabozzi, D; Thornhill, NF

2013-01-01

16.07.14 KB Ok to add accepted version to Spiral Model predictive control (MPC) is investigated as a control method which may offer advantages in frequency control of power systems than the control methods applied today, especially in presence of increased renewable energy penetration. The MPC includes constraints on both generation amount and generation rate of change, and it is tested on a one-area system. The proposed MPC is tested against a conventional proportional-integral (PI) cont...

Interferogram reduction and interpretation as applied to the optical analysis of the 10 kJ LASL laser fusion system

International Nuclear Information System (INIS)

Viswanathan, V.K.; Hall, W.S.; Liberman, I.; Lawrence, G.

1978-01-01

The LASL 10 kJ Eight-Beam CO 2 Laser Fusion System, currently under construction, has approximately one hundred optical elements per beam. The nominal system is diffraction limited and degradations in performance are primarily caused by imperfect components as well as alignment errors. Consequently, analysis and predictions for the system are very much dependent on the proper description of the imperfect components. The approach taken at LASL has been to characterize the components interferometrically. Interferograms of the various components are made at the 633 nm He--Ne wavelength. Detailed results of the analysis for one complete leg of the eight-beam system is presented

Applied dynamics with applications to multibody and mechatronic systems

CERN Document Server

Moon, Francis C

1998-01-01

Applied Dynamics provides a modern and thorough examination of dynamics with specific emphasis on physical examples and applications such as: robotic systems, magnetic bearings, aerospace dynamics, and microelectromagnetic machines. Also includes the development of the method of virtual velocities based on the principle of virtual power

SU-F-P-07: Applying Failure Modes and Effects Analysis to Treatment Planning System QA

International Nuclear Information System (INIS)

Mathew, D; Alaei, P

2016-01-01

Purpose: A small-scale implementation of Failure Modes and Effects Analysis (FMEA) for treatment planning system QA by utilizing methodology of AAPM TG-100 report. Methods: FMEA requires numerical values for severity (S), occurrence (O) and detectability (D) of each mode of failure. The product of these three values gives a risk priority number (RPN). We have implemented FMEA for the treatment planning system (TPS) QA for two clinics which use Pinnacle and Eclipse TPS. Quantitative monthly QA data dating back to 4 years for Pinnacle and 1 year for Eclipse have been used to determine values for severity (deviations from predetermined doses at points or volumes), and occurrence of such deviations. The TPS QA protocol includes a phantom containing solid water and lung- and bone-equivalent heterogeneities. Photon and electron plans have been evaluated in both systems. The dose values at multiple distinct points of interest (POI) within the solid water, lung, and bone-equivalent slabs, as well as mean doses to several volumes of interest (VOI), have been re-calculated monthly using the available algorithms. Results: The computed doses vary slightly month-over-month. There have been more significant deviations following software upgrades, especially if the upgrade involved re-modeling of the beams. TG-100 guidance and the data presented here suggest an occurrence (O) of 2 depending on the frequency of re-commissioning the beams, severity (S) of 3, and detectability (D) of 2, giving an RPN of 12. Conclusion: Computerized treatment planning systems could pose a risk due to dosimetric errors and suboptimal treatment plans. The FMEA analysis presented here suggests that TPS QA should immediately follow software upgrades, but does not need to be performed every month.

SU-F-P-07: Applying Failure Modes and Effects Analysis to Treatment Planning System QA

Energy Technology Data Exchange (ETDEWEB)

Mathew, D; Alaei, P [University Minnesota, Minneapolis, MN (United States)

2016-06-15

Purpose: A small-scale implementation of Failure Modes and Effects Analysis (FMEA) for treatment planning system QA by utilizing methodology of AAPM TG-100 report. Methods: FMEA requires numerical values for severity (S), occurrence (O) and detectability (D) of each mode of failure. The product of these three values gives a risk priority number (RPN). We have implemented FMEA for the treatment planning system (TPS) QA for two clinics which use Pinnacle and Eclipse TPS. Quantitative monthly QA data dating back to 4 years for Pinnacle and 1 year for Eclipse have been used to determine values for severity (deviations from predetermined doses at points or volumes), and occurrence of such deviations. The TPS QA protocol includes a phantom containing solid water and lung- and bone-equivalent heterogeneities. Photon and electron plans have been evaluated in both systems. The dose values at multiple distinct points of interest (POI) within the solid water, lung, and bone-equivalent slabs, as well as mean doses to several volumes of interest (VOI), have been re-calculated monthly using the available algorithms. Results: The computed doses vary slightly month-over-month. There have been more significant deviations following software upgrades, especially if the upgrade involved re-modeling of the beams. TG-100 guidance and the data presented here suggest an occurrence (O) of 2 depending on the frequency of re-commissioning the beams, severity (S) of 3, and detectability (D) of 2, giving an RPN of 12. Conclusion: Computerized treatment planning systems could pose a risk due to dosimetric errors and suboptimal treatment plans. The FMEA analysis presented here suggests that TPS QA should immediately follow software upgrades, but does not need to be performed every month.

An Analysis of Methods Section of Research Reports in Applied Linguistics

OpenAIRE

Patrícia Marcuzzo

2011-01-01

This work aims at identifying analytical categories and research procedures adopted in the analysis of research article in Applied Linguistics/EAP in order to propose a systematization of the research procedures in Genre Analysis. For that purpose, 12 research reports and interviews with four authors were analyzed. The analysis showed that the studies are concentrated on the investigation of the macrostructure or on the microstructure of research articles in different fields. Studies about th...

Application of NASA Kennedy Space Center system assurance analysis methodology to nuclear power plant systems designs

International Nuclear Information System (INIS)

Page, D.W.

1985-01-01

The Kennedy Space Center (KSC) entered into an agreement with the Nuclear Regulatory Commission (NRC) to conduct a study to demonstrate the feasibility and practicality of applying the KSC System Assurance Analysis (SAA) methodology to nuclear power plant systems designs. In joint meetings of KSC and Duke Power personnel, an agreement was made to select to CATAWBA systems, the Containment Spray System and the Residual Heat Removal System, for the analyses. Duke Power provided KSC with a full set a Final Safety Analysis Reports as well as schematics for the two systems. During Phase I of the study the reliability analyses of the SAA were performed. During Phase II the hazard analyses were performed. The final product of Phase II is a handbook for implementing the SAA methodology into nuclear power plant systems designs. The purpose of this paper is to describe the SAA methodology as it applies to nuclear power plant systems designs and to discuss the feasibility of its application. The conclusion is drawn that nuclear power plant systems and aerospace ground support systems are similar in complexity and design and share common safety and reliability goals. The SAA methodology is readily adaptable to nuclear power plant designs because of it's practical application of existing and well known safety and reliability analytical techniques tied to an effective management information system

30 CFR 260.111 - What conditions apply to the bidding systems that MMS uses?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What conditions apply to the bidding systems that MMS uses? 260.111 Section 260.111 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... What conditions apply to the bidding systems that MMS uses? (a) For each of the bidding systems in...

Development of the next generation reactor analysis code system, MARBLE

International Nuclear Information System (INIS)

Yokoyama, Kenji; Hazama, Taira; Nagaya, Yasunobu; Chiba, Go; Kugo, Teruhiko; Ishikawa, Makoto; Tatsumi, Masahiro; Hirai, Yasushi; Hyoudou, Hideaki; Numata, Kazuyuki; Iwai, Takehiko; Jin, Tomoyuki

2011-03-01

A next generation reactor analysis code system, MARBLE, has been developed. MARBLE is a successor of the fast reactor neutronics analysis code systems, JOINT-FR and SAGEP-FR (conventional systems), which were developed for so-called JUPITER standard analysis methods. MARBLE has the equivalent analysis capability to the conventional system because MARBLE can utilize sub-codes included in the conventional system without any change. On the other hand, burnup analysis functionality for power reactors is improved compared with the conventional system by introducing models on fuel exchange treatment and control rod operation and so on. In addition, MARBLE has newly developed solvers and some new features of burnup calculation by the Krylov sub-space method and nuclear design accuracy evaluation by the extended bias factor method. In the development of MARBLE, the object oriented technology was adopted from the view-point of improvement of the software quality such as flexibility, expansibility, facilitation of the verification by the modularization and assistance of co-development. And, software structure called the two-layer system consisting of scripting language and system development language was applied. As a result, MARBLE is not an independent analysis code system which simply receives input and returns output, but an assembly of components for building an analysis code system (i.e. framework). Furthermore, MARBLE provides some pre-built analysis code systems such as the fast reactor neutronics analysis code system. SCHEME, which corresponds to the conventional code and the fast reactor burnup analysis code system, ORPHEUS. (author)

Analysis of Brick Masonry Wall using Applied Element Method

Science.gov (United States)

Lincy Christy, D.; Madhavan Pillai, T. M.; Nagarajan, Praveen

2018-03-01

The Applied Element Method (AEM) is a versatile tool for structural analysis. Analysis is done by discretising the structure as in the case of Finite Element Method (FEM). In AEM, elements are connected by a set of normal and shear springs instead of nodes. AEM is extensively used for the analysis of brittle materials. Brick masonry wall can be effectively analyzed in the frame of AEM. The composite nature of masonry wall can be easily modelled using springs. The brick springs and mortar springs are assumed to be connected in series. The brick masonry wall is analyzed and failure load is determined for different loading cases. The results were used to find the best aspect ratio of brick to strengthen brick masonry wall.

Terahertz spectroscopy applied to food model systems

DEFF Research Database (Denmark)

Møller, Uffe

Water plays a crucial role in the quality of food. Apart from the natural water content of a food product, the state of that water is very important. Water can be found integrated into the biological material or it can be added during production of the product. Currently it is difficult...... to differentiate between these types of water in subsequent quality controls. This thesis describes terahertz time-domain spectroscopy applied on aqueous food model systems, with particular focus on ethanol-water mixtures and confined water pools in inverse micelles....

Essays on environmental policy analysis: Computable general equilibrium approaches applied to Sweden

International Nuclear Information System (INIS)

Hill, M.

2001-01-01

This thesis consists of three essays within the field of applied environmental economics, with the common basic aim of analyzing effects of Swedish environmental policy. Starting out from Swedish environmental goals, the thesis assesses a range of policy-related questions. The objective is to quantify policy outcomes by constructing and applying numerical models especially designed for environmental policy analysis. Static and dynamic multi-sectoral computable general equilibrium models are developed in order to analyze the following issues. The costs and benefits of a domestic carbon dioxide (CO 2 ) tax reform. Special attention is given to how these costs and benefits depend on the structure of the tax system and, furthermore, how they depend on policy-induced changes in 'secondary' pollutants. The effects of allowing for emission permit trading through time when the domestic long-term domestic environmental goal is specified in CO 2 stock terms. The effects on long-term projected economic growth and welfare that are due to damages from emission flow and accumulation of 'local' pollutants (nitrogen oxides and sulfur dioxide), as well as the outcome of environmental policy when costs and benefits are considered in an integrated environmental-economic framework

Applied Fourier analysis from signal processing to medical imaging

CERN Document Server

Olson, Tim

2017-01-01

The first of its kind, this focused textbook serves as a self-contained resource for teaching from scratch the fundamental mathematics of Fourier analysis and illustrating some of its most current, interesting applications, including medical imaging and radar processing. Developed by the author from extensive classroom teaching experience, it provides a breadth of theory that allows students to appreciate the utility of the subject, but at as accessible a depth as possible. With myriad applications included, this book can be adapted to a one or two semester course in Fourier Analysis or serve as the basis for independent study. Applied Fourier Analysis assumes no prior knowledge of analysis from its readers, and begins by making the transition from linear algebra to functional analysis. It goes on to cover basic Fourier series and Fourier transforms before delving into applications in sampling and interpolation theory, digital communications, radar processing, medical i maging, and heat and wave equations. Fo...

ASPECTS OF OBSTACLES FOR APPLYING ACTIVITY BASED COSTING (ABC SYSTEM IN EGYPTIAN FIRMS

Directory of Open Access Journals (Sweden)

Petru STEFEA

2013-10-01

Full Text Available The following investigation aims to determine the aspects of obstacles for applying Activity Based Costing (ABC system in the Egyptian case and the significant differences among the effects of such obstacles . The Study used the survey method to describe and analyze the obstacles in some Egyptian firms. The population of the study is Egyptian manufacturing firms. This survey used the number of 392 questionnaires that were used throughout the total of 23 Egyptian manufacturing firms, during the first half of 2013. Finally, the study found some influencing obstacles for applying this system (ABC and there were significant differences among the aspects of obstacles for applying ABC system in the Egyptian manufacturing firms.

Applied patent RFID systems for building reacting HEPA air ventilation system in hospital operation rooms.

Science.gov (United States)

Lin, Jesun; Pai, Jar-Yuan; Chen, Chih-Cheng

2012-12-01

RFID technology, an automatic identification and data capture technology to provide identification, tracing, security and so on, was widely applied to healthcare industry in these years. Employing HEPA ventilation system in hospital is a way to ensure healthful indoor air quality to protect patients and healthcare workers against hospital-acquired infections. However, the system consumes lots of electricity which cost a lot. This study aims to apply the RFID technology to offer a unique medical staff and patient identification, and reacting HEPA air ventilation system in order to reduce the cost, save energy and prevent the prevalence of hospital-acquired infection. The system, reacting HEPA air ventilation system, contains RFID tags (for medical staffs and patients), sensor, and reacting system which receives the information regarding the number of medical staff and the status of the surgery, and controls the air volume of the HEPA air ventilation system accordingly. A pilot program was carried out in a unit of operation rooms of a medical center with 1,500 beds located in central Taiwan from Jan to Aug 2010. The results found the air ventilation system was able to function much more efficiently with less energy consumed. Furthermore, the indoor air quality could still keep qualified and hospital-acquired infection or other occupational diseases could be prevented.

Conventional and advanced exergoeconomic analyses applied to ethylene refrigeration system of an existing olefin plant

International Nuclear Information System (INIS)

Palizdar, A.; Sadrameli, S.M.

2017-01-01

Highlights: • Conventional and advanced exergoeconomic analyses were applied. • Investment cost for most of the components is larger than exergy destruction cost. • Most of exergy destruction and investment costs are avoidable and endogenous. • Distillation column and compressor have the highest priority to improve. - Abstract: Ethylene refrigeration system of a light olefins production plant was investigated using the conventional and advanced exergoeconomic analyses. In advanced analysis, investment and exergy destruction costs of system components are divided into endogenous/exogenous and avoidable/unavoidable parts to improve our knowledge about the refrigeration system. Results of the exergoeconomic analysis represent that the total cost of column T-1 (1217.67 $/h), compressor C-3 (864.88 $/h), compressor C-2 (250.43 $/h) and multi stream heat exchanger MSHE-1 (154.19 $/h) are larger than other components. Results of the advanced exergoeconomic analysis reveal that most of the total costs of components are endogenous and can be reduced only for column T-1 and compressor C-3. With increasing the efficiency of these two components, investment and exergy destruction costs has been decreased (1381.74 $/h). Large amounts of endogenous exergy destruction cost of components represent that the interactions between the components are not a main reason for exergy destruction. Therefore, an appropriate strategy for the enhancement of the system efficiency and profitability is to improve their performance. Based on the above results, column T-1 and compressor C-3 have the highest priority to improve the performance. Sensitivity of the analysis parameters to some important operating variables have also been investigated.

Features of applying systems approach for evaluating the reliability of cryogenic systems for special purposes

Directory of Open Access Journals (Sweden)

E. D. Chertov

2016-01-01

Full Text Available Summary. The analysis of cryogenic installations confirms objective regularity of increase in amount of the tasks solved by systems of a special purpose. One of the most important directions of development of a cryogenics is creation of installations for air separation product receipt, namely oxygen and nitrogen. Modern aviation complexes require use of these gases in large numbers as in gaseous, and in the liquid state. The onboard gas systems applied in aircraft of the Russian Federation are subdivided on: oxygen system; air (nitric system; system of neutral gas; fire-proof system. Technological schemes ADI are in many respects determined by pressure of compressed air or, in a general sense, a refrigerating cycle. For the majority ADI a working body of a refrigerating cycle the divided air is, that is technological and refrigerating cycles in installation are integrated. By this principle differentiate installations: low pressure; average and high pressure; with detander; with preliminary chilling. There is also insignificant number of the ADI types in which refrigerating and technological cycles are separated. These are installations with external chilling. For the solution of tasks of control of technical condition of the BRV hardware in real time and estimates of indicators of reliability it is offered to use multi-agent technologies. Multi-agent approach is the most acceptable for creation of SPPR for reliability assessment as allows: to redistribute processing of information on elements of system that leads to increase in overall performance; to solve a problem of accumulating, storage and recycling of knowledge that will allow to increase significantly efficiency of the solution of tasks of an assessment of reliability; to considerably reduce intervention of the person in process of functioning of system that will save time of the person of the making decision (PMD and will not demand from it special skills of work with it.

A Monte Carlo error simulation applied to calibration-free X-ray diffraction phase analysis

International Nuclear Information System (INIS)

Braun, G.E.

1986-01-01

Quantitative phase analysis of a system of n phases can be effected without the need for calibration standards provided at least n different mixtures of these phases are available. A series of linear equations relating diffracted X-ray intensities, weight fractions and quantitation factors coupled with mass balance relationships can be solved for the unknown weight fractions and factors. Uncertainties associated with the measured X-ray intensities, owing to counting of random X-ray quanta, are used to estimate the errors in the calculated parameters utilizing a Monte Carlo simulation. The Monte Carlo approach can be generalized and applied to any quantitative X-ray diffraction phase analysis method. Two examples utilizing mixtures of CaCO 3 , Fe 2 O 3 and CaF 2 with an α-SiO 2 (quartz) internal standard illustrate the quantitative method and corresponding error analysis. One example is well conditioned; the other is poorly conditioned and, therefore, very sensitive to errors in the measured intensities. (orig.)

Cyber Security Analysis by Attack Trees for a Reactor Protection System

Energy Technology Data Exchange (ETDEWEB)

Park, Gee-Yong; Lee, Cheol Kwon; Choi, Jong Gyun; Kim, Dong Hoon; Lee, Young Jun; Kwon, Kee-Choon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-10-15

As nuclear facilities are introducing digital systems, the cyber security becomes an emerging topic to be analyzed and resolved. The domestic and other nation's regulatory bodies notice this topic and are preparing an appropriate guidance. The nuclear industry where new construction or upgrade of I and C systems is planned is analyzing and establishing a cyber security. A risk-based analysis for the cyber security has been performed in the KNICS (Korea Nuclear I and C Systems) project where the cyber security analysis has been applied to a reactor protection system (RPS). In this paper, the cyber security analysis based on the attack trees is proposed for the KNICS RPS.

Air pollution simulation and geographical information systems (GIS) applied to Athens International Airport.

Science.gov (United States)

Theophanides, Mike; Anastassopoulou, Jane

2009-07-01

This study presents an improved methodology for analysing atmospheric pollution around airports using Gaussian-plume numerical simulation integrated with Geographical Information Systems (GIS). The new methodology focuses on streamlining the lengthy analysis process for Airport Environmental Impact Assessments by integrating the definition of emission sources, simulating and displaying the results in a GIS environment. One of the objectives of the research is to validate the methodology applied to the Athens International Airport, "Eleftherios Venizelos", to produce a realistic estimate of emission inventories, dispersion simulations and comparison to measured data. The methodology used a combination of the Emission Dispersion and Modelling System (EDMS) and the Atmospheric Dispersion and Modelling system (ADMS) to improve the analysis process. The second objective is to conduct numerical simulations under various adverse conditions (e.g. scenarios) and assess the dispersion in the surrounding areas. The study concludes that the use of GIS in environmental assessments provides a valuable advantage for organizing data and entering accurate geographical/topological information for the simulation engine. Emissions simulation produced estimates within 10% of published values. Dispersion simulations indicate that airport pollution will affect neighbouring cities such as Rafina and Loutsa. Presently, there are no measured controls in these areas. In some cases, airport pollution can contribute to as much as 40% of permissible EU levels in VOCs.

Bayesian statistics applied to neutron activation data for reactor flux spectrum analysis

International Nuclear Information System (INIS)

Chiesa, Davide; Previtali, Ezio; Sisti, Monica

2014-01-01

Highlights: • Bayesian statistics to analyze the neutron flux spectrum from activation data. • Rigorous statistical approach for accurate evaluation of the neutron flux groups. • Cross section and activation data uncertainties included for the problem solution. • Flexible methodology applied to analyze different nuclear reactor flux spectra. • The results are in good agreement with the MCNP simulations of neutron fluxes. - Abstract: In this paper, we present a statistical method, based on Bayesian statistics, to analyze the neutron flux spectrum from the activation data of different isotopes. The experimental data were acquired during a neutron activation experiment performed at the TRIGA Mark II reactor of Pavia University (Italy) in four irradiation positions characterized by different neutron spectra. In order to evaluate the neutron flux spectrum, subdivided in energy groups, a system of linear equations, containing the group effective cross sections and the activation rate data, has to be solved. However, since the system’s coefficients are experimental data affected by uncertainties, a rigorous statistical approach is fundamental for an accurate evaluation of the neutron flux groups. For this purpose, we applied the Bayesian statistical analysis, that allows to include the uncertainties of the coefficients and the a priori information about the neutron flux. A program for the analysis of Bayesian hierarchical models, based on Markov Chain Monte Carlo (MCMC) simulations, was used to define the problem statistical model and solve it. The first analysis involved the determination of the thermal, resonance-intermediate and fast flux components and the dependence of the results on the Prior distribution choice was investigated to confirm the reliability of the Bayesian analysis. After that, the main resonances of the activation cross sections were analyzed to implement multi-group models with finer energy subdivisions that would allow to determine the

Cost and performance analysis of conceptual designs of physical protection systems

International Nuclear Information System (INIS)

Hicks, M.J.; Snell, M.S.; Sandoval, J.S.; Potter, C.S.

1998-01-01

CPA -- Cost and Performance Analysis -- is a methodology that joins Activity Based Cost (ABC) estimation with performance based analysis of physical protection systems. CPA offers system managers an approach that supports both tactical decision making and strategic planning. Current exploratory applications of the CPA methodology are addressing analysis of alternative conceptual designs. To support these activities, the original architecture for CPA, is being expanded to incorporate results from a suite of performance and consequence analysis tools such as JTS (Joint Tactical Simulation), ERAD (Explosive Release Atmospheric Dispersion) and blast effect models. The process flow for applying CPA to the development and analysis conceptual designs is illustrated graphically

Dual keel Space Station payload pointing system design and analysis feasibility study

Science.gov (United States)

Smagala, Tom; Class, Brian F.; Bauer, Frank H.; Lebair, Deborah A.

1988-01-01

A Space Station attached Payload Pointing System (PPS) has been designed and analyzed. The PPS is responsible for maintaining fixed payload pointing in the presence of disturbance applied to the Space Station. The payload considered in this analysis is the Solar Optical Telescope. System performance is evaluated via digital time simulations by applying various disturbance forces to the Space Station. The PPS meets the Space Station articulated pointing requirement for all disturbances except Shuttle docking and some centrifuge cases.

Fast and effective embedded systems design applying the ARM mbed

CERN Document Server

Toulson, Rob

2012-01-01

A hands-on introduction to the field of embedded systems; A focus on fast prototyping of embedded systems; All key embedded system concepts covered through simple and effective experimentation; An understanding of ARM technology, one of the world's leaders; A practical introduction to embedded C; Applies possibly the most accessible set of tools available in the embedded world.  This book is an introduction to embedded systems design, using the ARM mbed and C programming language as development tools. The mbed provides a compact, self-contained and low-cost hardware core, and the

Positive Behavior Support and Applied Behavior Analysis: A Familial Alliance

Science.gov (United States)

Dunlap, Glen; Carr, Edward G.; Horner, Robert H.; Zarcone, Jennifer R.; Schwartz, Ilene

2008-01-01

Positive behavior support (PBS) emerged in the mid-1980s as an approach for understanding and addressing problem behaviors. PBS was derived primarily from applied behavior analysis (ABA). Over time, however, PBS research and practice has incorporated evaluative methods, assessment and intervention procedures, and conceptual perspectives associated…

Applied energy an introduction

CERN Document Server

Abdullah, Mohammad Omar

2012-01-01

Introduction to Applied EnergyGeneral IntroductionEnergy and Power BasicsEnergy EquationEnergy Generation SystemsEnergy Storage and MethodsEnergy Efficiencies and LossesEnergy industry and Energy Applications in Small -Medium Enterprises (SME) industriesEnergy IndustryEnergy-Intensive industryEnergy Applications in SME Energy industriesEnergy Sources and SupplyEnergy SourcesEnergy Supply and Energy DemandEnergy Flow Visualization and Sankey DiagramEnergy Management and AnalysisEnergy AuditsEnergy Use and Fuel Consumption StudyEnergy Life-Cycle AnalysisEnergy and EnvironmentEnergy Pollutants, S

NetCDF based data archiving system applied to ITER Fast Plant System Control prototype

International Nuclear Information System (INIS)

Castro, R.; Vega, J.; Ruiz, M.; De Arcas, G.; Barrera, E.; López, J.M.; Sanz, D.; Gonçalves, B.; Santos, B.; Utzel, N.; Makijarvi, P.

2012-01-01

Highlights: ► Implementation of a data archiving solution for a Fast Plant System Controller (FPSC) for ITER CODAC. ► Data archiving solution based on scientific NetCDF-4 file format and Lustre storage clustering. ► EPICS control based solution. ► Tests results and detailed analysis of using NetCDF-4 and clustering technologies on fast acquisition data archiving. - Abstract: EURATOM/CIEMAT and Technical University of Madrid (UPM) have been involved in the development of a FPSC (Fast Plant System Control) prototype for ITER, based on PXIe (PCI eXtensions for Instrumentation). One of the main focuses of this project has been data acquisition and all the related issues, including scientific data archiving. Additionally, a new data archiving solution has been developed to demonstrate the obtainable performances and possible bottlenecks of scientific data archiving in Fast Plant System Control. The presented system implements a fault tolerant architecture over a GEthernet network where FPSC data are reliably archived on remote, while remaining accessible to be redistributed, within the duration of a pulse. The storing service is supported by a clustering solution to guaranty scalability, so that FPSC management and configuration may be simplified, and a unique view of all archived data provided. All the involved components have been integrated under EPICS (Experimental Physics and Industrial Control System), implementing in each case the necessary extensions, state machines and configuration process variables. The prototyped solution is based on the NetCDF-4 (Network Common Data Format) file format in order to incorporate important features, such as scientific data models support, huge size files management, platform independent codification, or single-writer/multiple-readers concurrency. In this contribution, a complete description of the above mentioned solution is presented, together with the most relevant results of the tests performed, while focusing in the

Transient and fuel performance analysis with VTT's coupled code system

International Nuclear Information System (INIS)

Daavittila, A.; Hamalainen, A.; Raty, H.

2005-01-01

VTT (technical research center of Finland) maintains and further develops a comprehensive safety analysis code system ranging from the basic neutronic libraries to 3-dimensional transient analysis and fuel behaviour analysis codes. The code system is based on various types of couplings between the relevant physical phenomena. The main tools for analyses of reactor transients are presently the 3-dimensional reactor dynamics code HEXTRAN for cores with a hexagonal fuel assembly geometry and TRAB-3D for cores with a quadratic fuel assembly geometry. HEXTRAN has been applied to safety analyses of VVER type reactors since early 1990's. TRAB-3D is the latest addition to the code system, and has been applied to BWR and PWR analyses in recent years. In this paper it is shown that TRAB-3D has calculated accurately the power distribution during the Olkiluoto-1 load rejection test. The results from the 3-dimensional analysis can be used as boundary conditions for more detailed fuel rod analysis. For this purpose a general flow model GENFLO, developed at VTT, has been coupled with USNRC's FRAPTRAN fuel accident behaviour model. The example case for FRAPTRAN-GENFLO is for an ATWS at a BWR plant. The basis for the analysis is an oscillation incident in the Olkiluoto-1 BWR during reactor startup on February 22, 1987. It is shown that the new coupled code FRAPTRAN/GENFLO is quite a promising tool that can handle flow situations and give a detailed analysis of reactor transients

Tissue Microarray Analysis Applied to Bone Diagenesis.

Science.gov (United States)

Mello, Rafael Barrios; Silva, Maria Regina Regis; Alves, Maria Teresa Seixas; Evison, Martin Paul; Guimarães, Marco Aurelio; Francisco, Rafaella Arrabaca; Astolphi, Rafael Dias; Iwamura, Edna Sadayo Miazato

2017-01-04

Taphonomic processes affecting bone post mortem are important in forensic, archaeological and palaeontological investigations. In this study, the application of tissue microarray (TMA) analysis to a sample of femoral bone specimens from 20 exhumed individuals of known period of burial and age at death is described. TMA allows multiplexing of subsamples, permitting standardized comparative analysis of adjacent sections in 3-D and of representative cross-sections of a large number of specimens. Standard hematoxylin and eosin, periodic acid-Schiff and silver methenamine, and picrosirius red staining, and CD31 and CD34 immunohistochemistry were applied to TMA sections. Osteocyte and osteocyte lacuna counts, percent bone matrix loss, and fungal spheroid element counts could be measured and collagen fibre bundles observed in all specimens. Decalcification with 7% nitric acid proceeded more rapidly than with 0.5 M EDTA and may offer better preservation of histological and cellular structure. No endothelial cells could be detected using CD31 and CD34 immunohistochemistry. Correlation between osteocytes per lacuna and age at death may reflect reported age-related responses to microdamage. Methodological limitations and caveats, and results of the TMA analysis of post mortem diagenesis in bone are discussed, and implications for DNA survival and recovery considered.

Optimal hybrid renewable energy design in autonomous system using Modified Electric System Cascade Analysis and Homer software

International Nuclear Information System (INIS)

Zahboune, Hassan; Zouggar, Smail; Krajacic, Goran; Varbanov, Petar Sabev; Elhafyani, Mohammed; Ziani, Elmostafa

2016-01-01

Highlights: • New approach to integrate the Pinch Analysis illustrated. • Total annual cost and loss of power supply probability are the objective functions. • The new Hybrid Cascade Table to determine the optimal system design. • The performances of the new method are compared with Homer Pro. - Abstract: In this paper, a method for designing hybrid electricity generation systems is presented. It is based on the Modified Electric System Cascade Analysis method. The Power Pinch analysis is used as a guideline for development of an isolated power supply system, which consists of photovoltaic panels, wind turbines and energy storage units. The design procedure uses a simulation model, developed using MATLAB/SIMULINK and applies the developed algorithms for obtaining an optimal design. A validation of the Modified Electric System Cascade Analysis method is performed by comparing the obtained results with those from the Homer Pro software. The procedure takes as inputs hourly wind speed, solar radiation, demands, as well as cost data, for the generation and storage facilities. It is also applied to minimize the loss of power supply probability and to minimize the number of storage units. The algorithm has been demonstrated with a case study on a site in Oujda city, with daily electrical energy demand of 18.7 kWh, resulting in a combination of photovoltaic panels, wind turbine and batteries at minimal cost. The results from the Modified Electric System Cascade Analysis and HOMER Pro show that both tools successfully identified the optimal solution with difference of 0.04% in produced energy, 5.4% in potential excess of electricity and 0.07% in the cost of the energy.

Dependability analysis of a safety critical system the LHC beam dumping system at CERN

CERN Document Server

Filippini, R

2006-01-01

This thesis presents the dependability study of the Beam Dumping System of the Large Hadron Collider (LHC), the high energy particle accelerator to be commissioned at CERN in summer 2007. There are two identical, independent LHC Beam Dumping Systems (LBDS), one per LHC beam, each consisting of a series of magnets that extract the particle beam from the LHC ring into the extraction line leading to the absorbing block. The consequences of a failure within the LBDS can be very severe. This risk is reduced by applying redundancy to the design of the most critical components and on-line surveillance that, in case of a detected failure, issues a safe operation abort, called false beam dump. The system has been studied applying Failure Modes Effects and Criticality Analysis (FMECA) and reliability prediction. The system failure processes have been represented with a state transition diagram, governed by a Markov regenerative stochastic process, and analysed for different operational scenarios for one year of operati...

Management information system applied to radiation protection services

International Nuclear Information System (INIS)

Grossi, Pablo Andrade; Souza, Leonardo Soares de; Figueiredo, Geraldo Magela; Figueiredo, Arthur

2013-01-01

An effective management information system based on technology, information and people is necessary to improve the safety on all processes and operations subjected to radiation risks. The complex and multisource information flux from all radiation protection activities on nuclear organizations requires a robust tool/system to highlight the strengths and weaknesses and identify behaviors and trends on the activities requiring radiation protection programs. Those organized and processed data are useful to reach a successful management and to support the human decision-making on nuclear organization. This paper presents recent improvements on a management information system based on the radiation protection directives and regulations from Brazilian regulatory body. This radiation protection control system is applied to any radiation protection services and research institutes subjected to Brazilian nuclear regulation and is a powerful tool for continuous management, not only indicating how the health and safety activities are going, but why they are not going as well as planned showing up the critical points. (author)

Management information system applied to radiation protection services

Energy Technology Data Exchange (ETDEWEB)

Grossi, Pablo Andrade; Souza, Leonardo Soares de; Figueiredo, Geraldo Magela; Figueiredo, Arthur, E-mail: pabloag@cdtn.br, E-mail: lss@cdtn.br, E-mail: gmf@cdtn.br, E-mail: arthurqof@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2013-07-01

An effective management information system based on technology, information and people is necessary to improve the safety on all processes and operations subjected to radiation risks. The complex and multisource information flux from all radiation protection activities on nuclear organizations requires a robust tool/system to highlight the strengths and weaknesses and identify behaviors and trends on the activities requiring radiation protection programs. Those organized and processed data are useful to reach a successful management and to support the human decision-making on nuclear organization. This paper presents recent improvements on a management information system based on the radiation protection directives and regulations from Brazilian regulatory body. This radiation protection control system is applied to any radiation protection services and research institutes subjected to Brazilian nuclear regulation and is a powerful tool for continuous management, not only indicating how the health and safety activities are going, but why they are not going as well as planned showing up the critical points. (author)

Health system barriers and enablers to early access to breast cancer screening, detection, and diagnosis: a global analysis applied to the MENA region.

Science.gov (United States)

Bowser, D; Marqusee, H; El Koussa, M; Atun, R

2017-11-01

To identify barriers and enablers that impact access to early screening, detection, and diagnosis of breast cancer both globally and more specifically in the Middle East and North Africa (MENA) region (with a specific focus on Egypt, Jordan, Oman, Saudi Arabia, United Arab Emirates [UAE], and Kuwait) with a specific focus on the health system. A systematic review of literature. We conducted a systematic reviewing using the PRISMA methodology. We searched PubMed, Global Index Medicus, and EMBASE for studies on 'breast cancer', 'breast neoplasm,' or 'screening, early detection, and early diagnosis' as well as key words related to the following barriers: religion, culture, health literacy, lack of knowledge/awareness/understanding, attitudes, fatalism/fear, shame/embarrassment, and physician gender from January 1, 2000 until September 1, 2016. Two independent reviewers screened both titles and abstracts. The application of inclusion and exclusion criteria yielded a final list of articles. A conceptual framework was used to guide the thematic analysis and examine health system barriers and enablers to breast cancer screening at the broader macro health system level, at the health provider level, and the individual level. The analysis was conducted globally and in the MENA region. A total of 11,936 references were identified through the initial search strategy, of which 55 were included in the final thematic analysis. The results found the following barriers and enablers to access to breast cancer screening at the health system level, the health provider level, and the individual level: health system structures such as health insurance and care coordination systems, costs, time concerns, provider characteristics including gender of the provider, quality of care issues, medical concerns, and fear. In addition, the following seven barriers and enablers were identified at the health system or provider level as significantly impacting screening for breast cancer: (1) access

Expert systems for space power supply: design, analysis, and evaluation

International Nuclear Information System (INIS)

Cooper, R.S.; Thomson, M.K.; Hoshor, A.

1987-01-01

The authors evaluated the feasibility of applying expert systems to the conceptual design, analysis, and evaluation of space power supplies in particular, and complex systems in general. To do this, they analyzed the space power supply design process and in associated knowledge base, and characterized them in a form suitable for computer emulation of a human expert. The existing expert system tools and the results achieved with them were evaluated to assess their applicability to power system design. They applied some new concepts for combining program architectures (modular expert systems and algorithms) with information about the domain to create a deep system for handling the complex design problem. They authors developed, programmed and tested NOVICE, a code to solve a simplified version of a scoping study of a wide variety of power supply types for a broad range of missions, as a concrete feasibility demonstration

Analysis and Design of International Emission Trading Markets Applying System Dynamics Techniques

Science.gov (United States)

Hu, Bo; Pickl, Stefan

2010-11-01

The design and analysis of international emission trading markets is an important actual challenge. Time-discrete models are needed to understand and optimize these procedures. We give an introduction into this scientific area and present actual modeling approaches. Furthermore, we develop a model which is embedded in a holistic problem solution. Measures for energy efficiency are characterized. The economic time-discrete "cap-and-trade" mechanism is influenced by various underlying anticipatory effects. With a systematic dynamic approach the effects can be examined. First numerical results show that fair international emissions trading can only be conducted with the use of protective export duties. Furthermore a comparatively high price which evokes emission reduction inevitably has an inhibiting effect on economic growth according to our model. As it always has been expected it is not without difficulty to find a balance between economic growth and emission reduction. It can be anticipated using our System Dynamics model simulation that substantial changes must be taken place before international emissions trading markets can contribute to global GHG emissions mitigation.

Systems Theoretic Process Analysis Applied to an Offshore Supply Vessel Dynamic Positioning System

Science.gov (United States)

2016-06-01

human operators of the system and software components, addressing both in a meaningful way and placing as much or more importance on their behavior ...excessive workload, normalization of deviance , etc. c) The OSV Crew follows the correct procedures but equipment failure results in the DP system (auto...This could be a result of excessive workload, normalization of deviance , etc. c) The OSV Crew follows the correct procedures but equipment failure

Systemization of Design and Analysis Technology for Advanced Reactor

International Nuclear Information System (INIS)

Kim, Keung Koo; Lee, J.; Zee, S. K.

2009-01-01

The present study is performed to establish the base for the license application of the original technology by systemization and enhancement of the technology that is indispensable for the design and analysis of the advanced reactors including integral reactors. Technical reports and topical reports are prepared for this purpose on some important design/analysis methodology; design and analysis computer programs, structural integrity evaluation of main components and structures, digital I and C systems and man-machine interface design. PPS design concept is complemented reflecting typical safety analysis results. And test plans and requirements are developed for the verification of the advanced reactor technology. Moreover, studies are performed to draw up plans to apply to current or advanced power reactors the original technologies or base technologies such as patents, computer programs, test results, design concepts of the systems and components of the advanced reactors. Finally, pending issues are studied of the advanced reactors to improve the economics and technology realization

Architectural Analysis of Complex Evolving Systems of Systems

Science.gov (United States)

Lindvall, Mikael; Stratton, William C.; Sibol, Deane E.; Ray, Arnab; Ackemann, Chris; Yonkwa, Lyly; Ganesan, Dharma

2009-01-01

The goal of this collaborative project between FC-MD, APL, and GSFC and supported by NASA IV&V Software Assurance Research Program (SARP), was to develop a tool, Dynamic SAVE, or Dyn-SAVE for short, for analyzing architectures of systems of systems. The project team was comprised of the principal investigator (PI) from FC-MD and four other FC-MD scientists (part time) and several FC-MD students (full time), as well as, two APL software architects (part time), and one NASA POC (part time). The PI and FC-MD scientists together with APL architects were responsible for requirements analysis, and for applying and evaluating the Dyn-SAVE tool and method. The PI and a group of FC-MD scientists were responsible for improving the method and conducting outreach activities, while another group of FC-MD scientists were responsible for development and improvement of the tool. Oversight and reporting was conducted by the PI and NASA POC. The project team produced many results including several prototypes of the Dyn-SAVE tool and method, several case studies documenting how the tool and method was applied to APL s software systems, and several published papers in highly respected conferences and journals. Dyn-SAVE as developed and enhanced throughout this research period, is a software tool intended for software developers and architects, software integration testers, and persons who need to analyze software systems from the point of view of how it communicates with other systems. Using the tool, the user specifies the planned communication behavior of the system modeled as a sequence diagram. The user then captures and imports the actual communication behavior of the system, which is then converted and visualized as a sequence diagram by Dyn-SAVE. After mapping the planned to the actual and specifying parameter and timing constraints, Dyn-SAVE detects and highlights deviations between the planned and the actual behavior. Requirements based on the need to analyze two inter-system

Exploratory Factor Analysis as a Construct Validation Tool: (Mis)applications in Applied Linguistics Research

Science.gov (United States)

Karami, Hossein

2015-01-01

Factor analysis has been frequently exploited in applied research to provide evidence about the underlying factors in various measurement instruments. A close inspection of a large number of studies published in leading applied linguistic journals shows that there is a misconception among applied linguists as to the relative merits of exploratory…

A graphical user-interface for propulsion system analysis

Science.gov (United States)

Curlett, Brian P.; Ryall, Kathleen

1993-01-01

NASA LeRC uses a series of computer codes to calculate installed propulsion system performance and weight. The need to evaluate more advanced engine concepts with a greater degree of accuracy has resulted in an increase in complexity of this analysis system. Therefore, a graphical user interface was developed to allow the analyst to more quickly and easily apply these codes. The development of this interface and the rationale for the approach taken are described. The interface consists of a method of pictorially representing and editing the propulsion system configuration, forms for entering numerical data, on-line help and documentation, post processing of data, and a menu system to control execution.

The Projection of the Classification Systems of Management. Analysis and Evaluation

Directory of Open Access Journals (Sweden)

Solomia Andreş

2006-10-01

Full Text Available In this paper I want to make the analysis of management styles by applying the methods which allow the assurance of a comparator system, to make possible a calculation of some indicators to differentiate the managers. The analysis conclusion – there aren’t valid universal styles, only different and adaptable styles

Sensitivity analysis techniques applied to a system of hyperbolic conservation laws

International Nuclear Information System (INIS)

Weirs, V. Gregory; Kamm, James R.; Swiler, Laura P.; Tarantola, Stefano; Ratto, Marco; Adams, Brian M.; Rider, William J.; Eldred, Michael S.

2012-01-01

Sensitivity analysis is comprised of techniques to quantify the effects of the input variables on a set of outputs. In particular, sensitivity indices can be used to infer which input parameters most significantly affect the results of a computational model. With continually increasing computing power, sensitivity analysis has become an important technique by which to understand the behavior of large-scale computer simulations. Many sensitivity analysis methods rely on sampling from distributions of the inputs. Such sampling-based methods can be computationally expensive, requiring many evaluations of the simulation; in this case, the Sobol' method provides an easy and accurate way to compute variance-based measures, provided a sufficient number of model evaluations are available. As an alternative, meta-modeling approaches have been devised to approximate the response surface and estimate various measures of sensitivity. In this work, we consider a variety of sensitivity analysis methods, including different sampling strategies, different meta-models, and different ways of evaluating variance-based sensitivity indices. The problem we consider is the 1-D Riemann problem. By a careful choice of inputs, discontinuous solutions are obtained, leading to discontinuous response surfaces; such surfaces can be particularly problematic for meta-modeling approaches. The goal of this study is to compare the estimated sensitivity indices with exact values and to evaluate the convergence of these estimates with increasing samples sizes and under an increasing number of meta-model evaluations. - Highlights: ► Sensitivity analysis techniques for a model shock physics problem are compared. ► The model problem and the sensitivity analysis problem have exact solutions. ► Subtle details of the method for computing sensitivity indices can affect the results.

Comparing Waste-to-Energy technologies by applying energy system analysis

DEFF Research Database (Denmark)

Münster, Marie; Lund, Henrik

2010-01-01

Even when policies of waste prevention, re-use and recycling are prioritised a fraction of waste will still be left which can be used for energy recovery. This article asks the question: How to utilise waste for energy in the best way seen from an energy system perspective? Eight different Waste......-to-Energy technologies are compared with a focus on fuel efficiency, CO2 reductions and costs. The comparison is carried out by conducting detailed energy system analyses of the present as well as a potential future Danish energy system with a large share of combined heat and power as well as wind power. The study shows...... potential of using waste for the production of transport fuels. Biogas and thermal gasification technologies are hence interesting alternatives to waste incineration and it is recommended to support the use of biogas based on manure and organic waste. It is also recommended to support research...

Nonlinear dynamic analysis of nuclear reactor primary coolant systems

International Nuclear Information System (INIS)

Saffell, B.F. Jr.; Macek, R.W.; Thompson, T.R.; Lippert, R.F.

1979-01-01

The ADINA computer code is utilized to perform mechanical response analysis of pressurized reactor primary coolant systems subjected to postulated loss-of-coolant accident (LOCA) loadings. Specifically, three plant analyses are performed utilizing the geometric and material nonlinear analysis capabilities of ADINA. Each reactor system finite element model represents the reactor vessel and internals, piping, major components, and component supports in a single coupled model. Material and geometric nonlinear capabilities of the beam and truss elements are employed in the formulation of each finite element model. Loadings applied to each plant for LOCA dynamic analysis include steady-state pressure, dead weight, strain energy release, transient piping hydraulic forces, and reactor vessel cavity pressurization. Representative results are presented with some suggestions for consideration in future ADINA code development

System analysis and design

International Nuclear Information System (INIS)

Son, Seung Hui

2004-02-01

This book deals with information technology and business process, information system architecture, methods of system development, plan on system development like problem analysis and feasibility analysis, cases for system development, comprehension of analysis of users demands, analysis of users demands using traditional analysis, users demands analysis using integrated information system architecture, system design using integrated information system architecture, system implementation, and system maintenance.

Statistical analysis of the Ft. Calhoun reactor coolant pump system

International Nuclear Information System (INIS)

Heising, Carolyn D.

1998-01-01

In engineering science, statistical quality control techniques have traditionally been applied to control manufacturing processes. An application to commercial nuclear power plant maintenance and control is presented that can greatly improve plant safety. As a demonstration of such an approach to plant maintenance and control, a specific system is analyzed: the reactor coolant pumps (RCPs) of the Ft. Calhoun nuclear power plant. This research uses capability analysis, Shewhart X-bar, R-charts, canonical correlation methods, and design of experiments to analyze the process for the state of statistical control. The results obtained show that six out of ten parameters are under control specifications limits and four parameters are not in the state of statistical control. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators Such a system would provide operators with ample time to respond to possible emergency situations and thus improve plant safety and reliability. (author)

DATE analysis: A general theory of biological change applied to microarray data.

Science.gov (United States)

Rasnick, David

2009-01-01

In contrast to conventional data mining, which searches for specific subsets of genes (extensive variables) to correlate with specific phenotypes, DATE analysis correlates intensive state variables calculated from the same datasets. At the heart of DATE analysis are two biological equations of state not dependent on genetic pathways. This result distinguishes DATE analysis from other bioinformatics approaches. The dimensionless state variable F quantifies the relative overall cellular activity of test cells compared to well-chosen reference cells. The variable pi(i) is the fold-change in the expression of the ith gene of test cells relative to reference. It is the fraction phi of the genome undergoing differential expression-not the magnitude pi-that controls biological change. The state variable phi is equivalent to the control strength of metabolic control analysis. For tractability, DATE analysis assumes a linear system of enzyme-connected networks and exploits the small average contribution of each cellular component. This approach was validated by reproducible values of the state variables F, RNA index, and phi calculated from random subsets of transcript microarray data. Using published microarray data, F, RNA index, and phi were correlated with: (1) the blood-feeding cycle of the malaria parasite, (2) embryonic development of the fruit fly, (3) temperature adaptation of Killifish, (4) exponential growth of cultured S. pneumoniae, and (5) human cancers. DATE analysis was applied to aCGH data from the great apes. A good example of the power of DATE analysis is its application to genomically unstable cancers, which have been refractory to data mining strategies. 2009 American Institute of Chemical Engineers Biotechnol.

An Objective Comparison of Applied Behavior Analysis and Organizational Behavior Management Research

Science.gov (United States)

Culig, Kathryn M.; Dickinson, Alyce M.; McGee, Heather M.; Austin, John

2005-01-01

This paper presents an objective review, analysis, and comparison of empirical studies targeting the behavior of adults published in Journal of Applied Behavior Analysis (JABA) and Journal of Organizational Behavior Management (JOBM) between 1997 and 2001. The purpose of the comparisons was to identify similarities and differences with respect to…

Applying Triz for Production Quality Improvement

Directory of Open Access Journals (Sweden)

Swee Nikalus Shu Luing

2017-01-01

Full Text Available This paper aims to provide a thorough analysis on the application of TRIZ in improving the quality of canned food production. TRIZ tools such as engineering systems analysis, function analysis, cause and effect chain analysis, By-separation model and 40 Inventive Principles are applied in order to discover some feasible and elegant solutions to alleviate the problem. Findings revealed that the rejected canned products on the conveyor belt will be isolated or picked up with other good condition canned products which are lined up very closely to the rejected cans; though the visioning system is able detect the fault printing on the canned product. The main root cause is that the rejected canned product is picked up with other canned products in good condition because all cans are lined up on the belt and are very close to each other or having no gaps between the cans. Conversely, all cans on the conveyor belts are required to be very close to each other to avoid collisions that may damage the cans. The root cause is solved by applying function analysis, By-separation tool and Inventive Principles. Therefore, it can be concluded that TRIZ is a powerful tool in inventive problem solving.

Applying information network analysis to fire-prone landscapes: implications for community resilience

Directory of Open Access Journals (Sweden)

Derric B. Jacobs

2017-03-01

Full Text Available Resilient communities promote trust, have well-developed networks, and can adapt to change. For rural communities in fire-prone landscapes, current resilience strategies may prove insufficient in light of increasing wildfire risks due to climate change. It is argued that, given the complexity of climate change, adaptations are best addressed at local levels where specific social, cultural, political, and economic conditions are matched with local risks and opportunities. Despite the importance of social networks as key attributes of community resilience, research using social network analysis on coupled human and natural systems is scarce. Furthermore, the extent to which local communities in fire-prone areas understand climate change risks, accept the likelihood of potential changes, and have the capacity to develop collaborative mitigation strategies is underexamined, yet these factors are imperative to community resiliency. We apply a social network framework to examine information networks that affect perceptions of wildfire and climate change in Central Oregon. Data were collected using a mailed questionnaire. Analysis focused on the residents' information networks that are used to gain awareness of governmental activities and measures of community social capital. A two-mode network analysis was used to uncover information exchanges. Results suggest that the general public develops perceptions about climate change based on complex social and cultural systems rather than as patrons of scientific inquiry and understanding. It appears that perceptions about climate change itself may not be the limiting factor in these communities' adaptive capacity, but rather how they perceive local risks. We provide a novel methodological approach in understanding rural community adaptation and resilience in fire-prone landscapes and offer a framework for future studies.

NEW HUMAN SEMEN ANALYSIS SYSTEM (CASA USING MICROSCOPIC IMAGE PROCESSING TECHNIQUES

Directory of Open Access Journals (Sweden)

N M Chaudhari

2016-11-01

Full Text Available Computer assisted semen analysis (CASA helps the pathologist or fertility specialist to evaluate the human semen. Detail analysis of spermatozoa like morphology and motility is very important in the process of intrauterine insemination (IUI or In-vitro fertilization (IVF in infertile couple. The main objective for this new semen analysis is to provide a low cost solution to the pathologist and gynecologist for the routine raw semen analysis, finding the concentration of the semen with dynamic background removal and classify the spermatozoa type (grade according to the motility and structural abnormality as per the WHO criteria. In this paper a new system , computer assisted semen analysis system is proposed in which hybrid approach is used to identify the moving object, scan line algorithm is applied for confirmation of the objects having tails, so that we can count the actual number of spermatozoa. For removal of background initially the dynamic background generation algorithm is proposed to create a background for background subtraction stage. The standard data set is created with 40× and 100× magnification from the different raw semen s. For testing the efficiency of proposed algorithm, same frames are applied to the existing algorithm. Another module of the system is focused on finding the motility and Type classification of individual spermatozoa.

August Dvorak (1894-1975): Early expressions of applied behavior analysis and precision teaching

Science.gov (United States)

Joyce, Bonnie; Moxley, Roy A.

1988-01-01

August Dvorak is best known for his development of the Dvorak keyboard. However, Dvorak also adapted and applied many behavioral and scientific management techniques to the field of education. Taken collectively, these techniques are representative of many of the procedures currently used in applied behavior analysis, in general, and especially in precision teaching. The failure to consider Dvorak's instructional methods may explain some of the discrepant findings in studies which compare the efficiency of the Dvorak to the standard keyboard. This article presents a brief background on the development of the standard (QWERTY) and Dvorak keyboards, describes parallels between Dvorak's teaching procedures and those used in precision teaching, reviews some of the comparative research on the Dvorak keyboard, and suggests some implications for further research in applying the principles of behavior analysis. PMID:22477993

How Has Applied Behavior Analysis and Behavior Therapy Changed?: An Historical Analysis of Journals

Science.gov (United States)

O'Donohue, William; Fryling, Mitch

2007-01-01

Applied behavior analysis and behavior therapy are now nearly a half century old. It is interesting to ask if and how these disciplines have changed over time, particularly regarding some of their key internal controversies (e.g., role of cognitions). We examined the first five years and the 2000-2004 five year period of the "Journal of Applied…

System analysis procedures for conducting PSA of nuclear power plants

International Nuclear Information System (INIS)

Lee, Yoon Hwan; Jeong, Won Dae; Kim, Tae Un; Kim, Kil You; Han, Sang Hoon; Chang, Seung Chul; Sung, Tae Yong; Yang, Jun Eon; Kang, Dae Il; Park, Jin Hee; Hwang, Mi Jeong; Jin, Young Ho.

1997-03-01

This document, the Probabilistic Safety Assessment(PSA) procedures guide for system analysis, is intended to provide the guidelines to analyze the target of system consistently and technically in the performance of PSA for nuclear power plants(NPPs). The guide has been prepared in accordance with the procedures and techniques for fault tree analysis(FTA) used in system analysis. Normally the main objective of system analysis is to assess the reliability of system modeled by Event Tree Analysis(ETA). A variety of analytical techniques can be used for the system analysis, however, FTA method is used in this procedures guide. FTA is the method used for representing the failure logic of plant systems deductively using AND, OR or NOT gates. The fault tree should reflect all possible failure modes that may contribute to the system unavailability. This should include contributions due to the mechanical failures of the components, Common Cause Failures (CCFs), human errors and outages for testing and maintenance. After the construction of fault tree is completed, system unavailability is calculated with the CUT module of KIRAP, and the qualitative and quantitative analysis is performed through the process as above stated. As above mentioned, the procedures for system analysis is based on PSA procedures and methods which has been applied to the safety assessments of constructing NPPs in the country. Accordingly, the method of FTA stated in this procedures guide will be applicable to PSA for the NPPs to be constructed in the future. (author). 6 tabs., 11 figs., 7 refs

System analysis procedures for conducting PSA of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Yoon Hwan; Jeong, Won Dae; Kim, Tae Un; Kim, Kil You; Han, Sang Hoon; Chang, Seung Chul; Sung, Tae Yong; Yang, Jun Eon; Kang, Dae Il; Park, Jin Hee; Hwang, Mi Jeong; Jin, Young Ho

1997-03-01

This document, the Probabilistic Safety Assessment(PSA) procedures guide for system analysis, is intended to provide the guidelines to analyze the target of system consistently and technically in the performance of PSA for nuclear power plants(NPPs). The guide has been prepared in accordance with the procedures and techniques for fault tree analysis(FTA) used in system analysis. Normally the main objective of system analysis is to assess the reliability of system modeled by Event Tree Analysis(ETA). A variety of analytical techniques can be used for the system analysis, however, FTA method is used in this procedures guide. FTA is the method used for representing the failure logic of plant systems deductively using AND, OR or NOT gates. The fault tree should reflect all possible failure modes that may contribute to the system unavailability. This should include contributions due to the mechanical failures of the components, Common Cause Failures (CCFs), human errors and outages for testing and maintenance. After the construction of fault tree is completed, system unavailability is calculated with the CUT module of KIRAP, and the qualitative and quantitative analysis is performed through the process as above stated. As above mentioned, the procedures for system analysis is based on PSA procedures and methods which has been applied to the safety assessments of constructing NPPs in the country. Accordingly, the method of FTA stated in this procedures guide will be applicable to PSA for the NPPs to be constructed in the future. (author). 6 tabs., 11 figs., 7 refs.

The stress analysis evaluation and pipe support layout for pressurizer discharge system

International Nuclear Information System (INIS)

Mao Qing; Wang Wei; Zhang Yixiong

2000-01-01

The author presents the stress analysis and evaluation of pipe layout and support adjustment process for Qinshan phase II pressurizer discharge system. Using PDL-SYSPIPE INTERFACE software, the characteristic parameters of the system are gained from 3-D CAD engineering design software PDL and outputted as the input date file format of special pipe stress analysis program SYSPIPE. Based on that, SYSPIPE program fast stress analysis function is applied in adjusting pipe layout , support layout and support types. According to RCC-M standard, the pipe stress analysis and evaluation under deadweight, internal pressure, thermal expansion, seismic, pipe rupture and discharge loads are fulfilled

Fatigue Analysis of Tubesheet/Shell Juncture Applying the Mitigation Factor for Over-conservatism

International Nuclear Information System (INIS)

Kang, Deog Ji; Kim, Kyu Hyoung; Lee, Jae Gon

2009-01-01

If the environmental fatigue requirements are applied to the primary components of a nuclear power plant, to which the present ASME Code fatigue curves are applied, some locations with high level CUF (Cumulative Usage Factor) are anticipated not to meet the code criteria. The application of environmental fatigue damage is still particularly controversial for plants with 60-year design lives. Therefore, it is need to develop a detailed fatigue analysis procedure to identify the conservatisms in the procedure and to lower the cumulative usage factor. Several factors are being considered to mitigate the conservatism such as three-dimensional finite element modeling. In the present analysis, actual pressure transient data instead of conservative maximum and minimum pressure data was applied as one of mitigation factors. Unlike in the general method, individual transient events were considered instead of the grouped transient events. The tubesheet/shell juncture in the steam generator assembly is the one of the weak locations and was, therefore, selected as a target to evaluate the mitigation factor in the present analysis

Artificial intelligence applied to process signal analysis

Science.gov (United States)

Corsberg, Dan

1988-01-01

Many space station processes are highly complex systems subject to sudden, major transients. In any complex process control system, a critical aspect of the human/machine interface is the analysis and display of process information. Human operators can be overwhelmed by large clusters of alarms that inhibit their ability to diagnose and respond to a disturbance. Using artificial intelligence techniques and a knowledge base approach to this problem, the power of the computer can be used to filter and analyze plant sensor data. This will provide operators with a better description of the process state. Once a process state is recognized, automatic action could be initiated and proper system response monitored.

Applied environmetrics. Simulation applied to the physical environment

Energy Technology Data Exchange (ETDEWEB)

Beer, T

1988-02-01

Environmetrics is the application of quantitative methods to all aspects of the social and natural environment. This includes forecasting, mathematical modelling, data analysis, and statistics. Applied Environmetrics as a discipline involves the analysis of environmental data through the use of packaged, or specially designed computer software. Two case studies of recent implementations of applied environmetrics within the Australian mining industry are dealt with. 3 figs., 5 refs.

A programmable autosampler for a field deployable tritium analysis system

International Nuclear Information System (INIS)

Hofstetter, K.J.; Cable, P.R.; Beals, D.M.; Jones, J.

1996-01-01

Researchers in the Environmental Technology Section of the Savannah River Technology Center, in cooperation with Sampling Systems, Inc. are developing a fully programmable, remotely operated, fixed volume, automatic sampler for use with the field deployable tritium analysis system currently under development at U. of GA's Center for Applied Isotope Studies. The sampler will collect a limited-volume sample and perform on-line sample purification for tritium analyses from multiple collection sites. Pneumatically operated stainless steel samplers operate satisfactorily upon remote activation. The one-step purification system removes all impurities with interfere with tritium analysis by liquid scintillation. Field testing has confirmed system operation. The autosampler may act as a stand-alone device and is enclosed in a rugged, field-portable case with wheels. The system weighs about 40 lbs

Applied Meteorology Unit (AMU)

Science.gov (United States)

Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

2010-01-01

This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2010 (October - December 2009). A detailed project schedule is included in the Appendix. Included tasks are: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool, Phase III, (3) Peak Wind Tool for General Forecasting, Phase II, (4) Upgrade Summer Severe Weather Tool in Meteorological Interactive Data Display System (MIDDS), (5) Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) Update and Maintainability, (5) Verify 12-km resolution North American Model (MesoNAM) Performance, and (5) Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) Graphical User Interface.

Wiener filter applied to a neutrongraphic system

International Nuclear Information System (INIS)

Crispim, V.R.; Lopes, R.T.; Borges, J.C.

1986-01-01

The randon characteristics of the image formation process influence the spatial image obtained in a neutrongraphy. Several methods can be used to optimize this image, though estimation of the noise added to the original signal. This work deals with the optimal filtering technique, using Wiener's filter. A simulation is made, where the signal (spatial resolution function) has a Lorentz's form, and ten kinds of random noise with increasing R.M.S. are generated and individually added to the original signal. Wiener's filter is applied to different noise amplitudes and the behaviour of the spatial resolution function for our system is also analysed. (Author) [pt

Financial Ratio Analysis: the Development of a Dedicated Management Information System

Directory of Open Access Journals (Sweden)

Voicu-Dan Dragomir

2007-01-01

Full Text Available This paper disseminates the results of the development process for a financial analysis information system. The system has been subject to conceptual design using the Unified Modeling Language (UML and has been implemented in object-oriented manner using the Visual Basic .NET 2003 programming language. The classic financial analysis literature is focused on the chain-substitution method of computing the prior-year to current-year variation of linked financial ratios. We have applied this technique on the DuPont System of analysis concerning the Return on Equity ratio, by designing several structural UML diagrams depicting the breakdown and analysis of each financial ratio involved. The resulting computer application offers a flexible approach to the analytical tools: the user is required to introduce the raw data and the system provides both table-style and charted information on the output of computation. User-friendliness is also a key feature of this particular financial analysis application.

Conceptual frameworks of the notification, registration and licensing system applied in Cuba

International Nuclear Information System (INIS)

Jerez Verqueria, Pablo; Quevedo Garcia, Jose R.; Betancourt Hernadez, Luisa A.

1996-01-01

In our country, a safety regulations has been established whose objective is to establish the authorization system to apply and the requirements to fulfill by the license applications. The present work describes how such system has been conceptually conceived

Systems thinking, the Swiss Cheese Model and accident analysis: a comparative systemic analysis of the Grayrigg train derailment using the ATSB, AcciMap and STAMP models.

Science.gov (United States)

Underwood, Peter; Waterson, Patrick

2014-07-01

The Swiss Cheese Model (SCM) is the most popular accident causation model and is widely used throughout various industries. A debate exists in the research literature over whether the SCM remains a viable tool for accident analysis. Critics of the model suggest that it provides a sequential, oversimplified view of accidents. Conversely, proponents suggest that it embodies the concepts of systems theory, as per the contemporary systemic analysis techniques. The aim of this paper was to consider whether the SCM can provide a systems thinking approach and remain a viable option for accident analysis. To achieve this, the train derailment at Grayrigg was analysed with an SCM-based model (the ATSB accident investigation model) and two systemic accident analysis methods (AcciMap and STAMP). The analysis outputs and usage of the techniques were compared. The findings of the study showed that each model applied the systems thinking approach. However, the ATSB model and AcciMap graphically presented their findings in a more succinct manner, whereas STAMP more clearly embodied the concepts of systems theory. The study suggests that, whilst the selection of an analysis method is subject to trade-offs that practitioners and researchers must make, the SCM remains a viable model for accident analysis. Copyright © 2013 Elsevier Ltd. All rights reserved.

Deep learning—Accelerating Next Generation Performance Analysis Systems?

Directory of Open Access Journals (Sweden)

Heike Brock

2018-02-01

Full Text Available Deep neural network architectures show superior performance in recognition and prediction tasks of the image, speech and natural language domains. The success of such multi-layered networks encourages their implementation in further application scenarios as the retrieval of relevant motion information for performance enhancement in sports. However, to date deep learning is only seldom applied to activity recognition problems of the human motion domain. Therefore, its use for sports data analysis might remain abstract to many practitioners. This paper provides a survey on recent works in the field of high-performance motion data and examines relevant technologies for subsequent deployment in real training systems. In particular, it discusses aspects of data acquisition, processing and network modeling. Analysis suggests the advantage of deep neural networks under difficult and noisy data conditions. However, further research is necessary to confirm the benefit of deep learning for next generation performance analysis systems.

CONACS: the DOE safety analysis system

International Nuclear Information System (INIS)

Martin, F.J.; Armstrong, G.R.; Niccoli, L.G.

1985-03-01

The CONtainment Analysis Code System (CONACS) is a large, comprehensive scientific simulation system for predicting conditions in an LMR facility following the occurrence of a postulated accident. It has now been developed to a stage of completion that can be referred to as a limited operational version. This version forms a permanent portion of the ultimate system. Because CONACS was developed with change in mind, it is now possible to draw on this strength to respond to changing requirements arising from advanced design concepts. The generalized design applications in the nuclear and non-nuclear fields and the quality assurance applied to the project make those adaptations reliable. In this paper the results of prototype tests and the implications of limited version tests are presented along with a brief description of CONACS and its relationship to LMR design optimization and cost reduction

CONACS, the DOE safety analysis system

International Nuclear Information System (INIS)

Martin, F.J.; Armstrong, G.R.; Niccoli, L.G.

1985-01-01

The CONtainment Analysis Code System (CONACS) is a large, comprehensive scientific simulation system for predicting conditions in an LMR facility following the occurrence of a postulated accident. It has now been developed to a stage of completion that can be referred to as a limited operational version. This version forms a permanent portion of the ultimate system. Because CONACS was developed with change in mind it is now possible to draw on this strength to respond to changing requirements arising from advanced design concepts. The generalized design applications in the nuclear and non-nuclear fields and the quality assurance applied to the project make those adaptations reliable. In this paper the results of prototype tests and the implications of limited version tests are presented along with a brief description of CONACS and its relationship to LMR design optimization and cost reduction

Applying multi-criteria analysis to radiation protection optimisation of low and intermediate level radioactive waste disposal

International Nuclear Information System (INIS)

Pages, P.; Schneider, T.; Lombard, J.

1991-01-01

Introduction of ALARA principles in the field of radioactive waste management implies a definition of the main characteristics of the decisional framework. Specific aspects should be taken into account: long term effects, large uncertainties and/or probabilistic events, with particular attention to the public and the political authorities. Traditional cost-benefit analysis is not qualified to deal with these different dimensions of the risk. The aim of this paper is to describe the principles of multi-criteria analysis applied to low and intermediate level radioactive waste disposal. Three categories of barriers can be distinguished acting at different protection levels: site characteristics, waste package and disposal system. A set of possible solutions can be identified, but the selection of the 'optimum' is not easy because of the diversity of the factors to be allowed for. For example, the following problem needs to be addressed: is it preferable to limit public radiation exposure several hundred years ahead or to reduce occupational exposure during the monitoring period of the disposal facility? An optimisation study is currently being performed on the various components of the structure, assuming given site and waste package characteristics. Four steps are distinguished: identification and analysis of options for the structure; selection and estimation of the qualitative and quantitative criteria; determination of the 'most interesting' solutions using multi-criteria analysis; sensitivity analysis and discussion on uncertainties related to the various assumptions. Based on the preliminary findings, the paper focuses on practical solutions to address the methodological issues raised in applying the optimisation procedures to radioactive waste management. (au)

Systems analysis support to the waste management technology center

International Nuclear Information System (INIS)

Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

1988-01-01

This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

Water management - management actions applied to water resources system

International Nuclear Information System (INIS)

Petkovski, Ljupcho; Tanchev, Ljubomir

2001-01-01

In this paper are presented a general description of water resource systems, a systematisation of the management tasks and the approaches for solution, including a review of methods used for solution of water management tasks and the fundamental postulates in the management. The management of water resources is a synonym for the management actions applied to water resource systems. It is a general term that unites planning and exploitation of the systems. The modern planning assumes separating the water racecourse part from the hydro technical part of the project. The water resource study is concerned with the solution for the resource problem. This means the parameters of the system are determined in parallel with the definition of the water utilisation regime. The hydro-technical part of the project is the design of structures necessary for the water resource solution. (Original)

Value/impact analysis for evaluating alternative mitigation systems

International Nuclear Information System (INIS)

Kastenberg, W.E.; Catton, I.; Castle, J.N.; Dooley, J.L.; Hammond, R.P.

1988-01-01

Methods are developed for assessing the cost effectiveness of proposed systems and strategies for mitigating the consequences of severe nuclear accidents. Such mitigation systems consist mostly of devices for improving the ability of a reactor containment to survive such an accident and retain all radioactive materials. Value/impact analysis is applied to the system with and without mitigation, using the population dose averted by mitigation as the value of benefit, and the dollar cost of the containment improvements as the impact. Other considerations affecting such analyses include ways of monetizing public health risk, economic discounting, and the effect of interdiction policy and other post-accident recovery costs

Development of an analysis methodology applied to 4πβ-γ software coincidence data acquisition system

International Nuclear Information System (INIS)

Brancaccio, Franco; Dias, Mauro da Silva; Toledo, Fabio de

2009-01-01

The present work describes the new software methodology under development at the IPEN Nuclear Metrology Laboratory for radionuclide standardizations with 4πβ-γ coincidence technique. The software includes the Coincidence Graphic User Interface (GUI) and the Coincidence Analysis Program. The first results for a 60 Co sample measurement are discussed and compared to the results obtained with two different conventional coincidence systems. (author)

Structured analysis and modeling of complex systems

Science.gov (United States)

Strome, David R.; Dalrymple, Mathieu A.

1992-01-01

The Aircrew Evaluation Sustained Operations Performance (AESOP) facility at Brooks AFB, Texas, combines the realism of an operational environment with the control of a research laboratory. In recent studies we collected extensive data from the Airborne Warning and Control Systems (AWACS) Weapons Directors subjected to high and low workload Defensive Counter Air Scenarios. A critical and complex task in this environment involves committing a friendly fighter against a hostile fighter. Structured Analysis and Design techniques and computer modeling systems were applied to this task as tools for analyzing subject performance and workload. This technology is being transferred to the Man-Systems Division of NASA Johnson Space Center for application to complex mission related tasks, such as manipulating the Shuttle grappler arm.

Applied Nuclear Accountability Systems: A Case Study in the System Architecture and Development of NuMAC

International Nuclear Information System (INIS)

Campbell, Andrea Beth

2004-01-01

This is a case study of the NuMAC nuclear accountability system developed at a private fuel fabrication facility. This paper investigates nuclear material accountability and safeguards by researching expert knowledge applied in the system design and development. Presented is a system developed to detect and deter the theft of weapons grade nuclear material. Examined is the system architecture that includes: issues for the design and development of the system; stakeholder issues; how the system was built and evolved; software design, database design, and development tool considerations; security and computing ethics. (author)

International research progress of CFD application in analysis of nuclear power system

International Nuclear Information System (INIS)

Li Linsen; Wang Kan; Song Xiaoming

2009-01-01

This paper introduces the latest international research progress of CFD application in nuclear reactor system analysis. CFD method has been applied to a few 3-D single phase transient simulations, including flow field modeling of the reactor cores, assemblies, and vessel plenums. On the other hand, CFD method applied to reactor system still needs further validation and benchmarking, meanwhile,the application of CFD also needs to be studied, including the setup of the Best Practice Guidelines (BPG). Furthermore, CFD codes are used to couple with thermal-hydraulic system codes or neutronic codes. Eventually, in two phase field and turbulence modeling, CFD codes are still being developed. (authors)

Sensitivity analysis of large system of chemical kinetic parameters for engine combustion simulation

Energy Technology Data Exchange (ETDEWEB)

Hsieh, H; Sanz-Argent, J; Petitpas, G; Havstad, M; Flowers, D

2012-04-19

In this study, the authors applied the state-of-the art sensitivity methods to downselect system parameters from 4000+ to 8, (23000+ -> 4000+ -> 84 -> 8). This analysis procedure paves the way for future works: (1) calibrate the system response using existed experimental observations, and (2) predict future experiment results, using the calibrated system.

Applied Information Systems Research Program (AISRP) Workshop 3 meeting proceedings

Science.gov (United States)

1993-01-01

The third Workshop of the Applied Laboratory Systems Research Program (AISRP) met at the Univeristy of Colorado's Laboratory for Atmospheric and Space Physics in August of 1993. The presentations were organized into four sessions: Artificial Intelligence Techniques; Scientific Visualization; Data Management and Archiving; and Research and Technology.

Aerobic granular SBR systems applied to the treatment of industrial effluents

International Nuclear Information System (INIS)

Rio, V. del; Figueroa, M.; Arrojo, B.; Mosquera-Corral, A.; Campos, J. L.; Garcia-Torriello, G.; Mendez, R.

2009-01-01

Systems based on aerobic granular biomass are an alternative to the conventional activated sludge plants for wastewater treatment. Large organic and nitrogen loads are treated in these systems where biomass grown as granules, easy to separate by setting, make unnecessary the construction of secondary settler reducing the surface requirements for the treatment system construction. Furthermore, in aerobic granular reactors simultaneously carbon and nitrogen removal is feasible. These systems have been already applied at laboratory scale for the treatment of different types of industrial and urban wastewater. (Author)

Aerobic granular SBR systems applied to the treatment of industrial effluents

Energy Technology Data Exchange (ETDEWEB)

Rio, V. del; Figueroa, M.; Arrojo, B.; Mosquera-Corral, A.; Campos, J. L.; Garcia-Torriello, G.; Mendez, R.

2009-07-01

Systems based on aerobic granular biomass are an alternative to the conventional activated sludge plants for wastewater treatment. Large organic and nitrogen loads are treated in these systems where biomass grown as granules, easy to separate by setting, make unnecessary the construction of secondary settler reducing the surface requirements for the treatment system construction. Furthermore, in aerobic granular reactors simultaneously carbon and nitrogen removal is feasible. These systems have been already applied at laboratory scale for the treatment of different types of industrial and urban wastewater. (Author)

Applying principles of health system strengthening to eye care

Directory of Open Access Journals (Sweden)

Karl Blanchet

2012-01-01

Full Text Available Understanding Health systems have now become the priority focus of researchers and policy makers, who have progressively moved away from a project-centred perspectives. The new tendency is to facilitate a convergence between health system developers and disease-specific programme managers in terms of both thinking and action, and to reconcile both approaches: one focusing on integrated health systems and improving the health status of the population and the other aiming at improving access to health care. Eye care interventions particularly in developing countries have generally been vertically implemented (e.g. trachoma, cataract surgeries often with parallel organizational structures or specialised disease specific services. With the emergence of health system strengthening in health strategies and in the service delivery of interventions there is a need to clarify and examine inputs in terms governance, financing and management. This present paper aims to clarify key concepts in health system strengthening and describe the various components of the framework as applied in eye care interventions.

A safety assessment methodology applied to CNS/ATM-based air traffic control system

Energy Technology Data Exchange (ETDEWEB)

Vismari, Lucio Flavio, E-mail: lucio.vismari@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil); Batista Camargo Junior, Joao, E-mail: joaocamargo@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil)

2011-07-15

In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

A safety assessment methodology applied to CNS/ATM-based air traffic control system

International Nuclear Information System (INIS)

Vismari, Lucio Flavio; Batista Camargo Junior, Joao

2011-01-01

In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

Applying DEA sensitivity analysis to efficiency measurement of Vietnamese universities

Directory of Open Access Journals (Sweden)

Thi Thanh Huyen Nguyen

2015-11-01

Full Text Available The primary purpose of this study is to measure the technical efficiency of 30 doctorate-granting universities, the universities or the higher education institutes with PhD training programs, in Vietnam, applying the sensitivity analysis of data envelopment analysis (DEA. The study uses eight sets of input-output specifications using the replacement as well as aggregation/disaggregation of variables. The measurement results allow us to examine the sensitivity of the efficiency of these universities with the sets of variables. The findings also show the impact of variables on their efficiency and its “sustainability”.

Frequency domain analysis of piping systems under short duration loading

International Nuclear Information System (INIS)

Sachs, K.; Sand, H.; Lockau, J.

1981-01-01

In piping analysis two procedures are used almost exclusively: the modal superposition method for relatively long input time histories (e.g., earthquake) and direct integration of the equations of motion for short input time histories. A third possibility, frequency domain analysis, has only rarely been applied to piping systems to date. This paper suggests the use of frequency domain analysis for specific piping problems for which only direct integration could be used in the past. Direct integration and frequency domain analysis are compared, and it is shown that the frequency domain method is less costly if more than four or five load cases are considered. In addition, this method offers technical advantages, such as more accurate representation of modal damping and greater insight into the structural behavior of the system. (orig.)

A Case Study in the Misrepresentation of Applied Behavior Analysis in Autism: The Gernsbacher Lectures

Science.gov (United States)

Morris, Edward K

2009-01-01

I know that most men, including those at ease with problems of the greatest complexity, can seldom accept the simplest and most obvious truth if it be such as would oblige them to admit the falsity of conclusions which they have proudly taught to others, and which they have woven, thread by thread, into the fabrics of their life. (Tolstoy, 1894) This article presents a case study in the misrepresentation of applied behavior analysis for autism based on Morton Ann Gernsbacher's presentation of a lecture titled “The Science of Autism: Beyond the Myths and Misconceptions.” Her misrepresentations involve the characterization of applied behavior analysis, descriptions of practice guidelines, reviews of the treatment literature, presentations of the clinical trials research, and conclusions about those trials (e.g., children's improvements are due to development, not applied behavior analysis). The article also reviews applied behavior analysis' professional endorsements and research support, and addresses issues in professional conduct. It ends by noting the deleterious effects that misrepresenting any research on autism (e.g., biological, developmental, behavioral) have on our understanding and treating it in a transdisciplinary context. PMID:22478522

Residual energy applications program systems analysis report

Energy Technology Data Exchange (ETDEWEB)

Yngve, P.W.

1980-10-01

Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

Effects analysis fuzzy inference system in nuclear problems using approximate reasoning

International Nuclear Information System (INIS)

Guimaraes, Antonio C.F.; Franklin Lapa, Celso Marcelo

2004-01-01

In this paper a fuzzy inference system modeling technique applied on failure mode and effects analysis (FMEA) is introduced in reactor nuclear problems. This method uses the concept of a pure fuzzy logic system to treat the traditional FMEA parameters: probabilities of occurrence, severity and detection. The auxiliary feed-water system of a typical two-loop pressurized water reactor (PWR) was used as practical example in this analysis. The kernel result is the conceptual confrontation among the traditional risk priority number (RPN) and the fuzzy risk priority number (FRPN) obtained from experts opinion. The set of results demonstrated the great potential of the inference system and advantage of the gray approach in this class of problems

Systemic toxicity of dermally applied crude oils in rats

Energy Technology Data Exchange (ETDEWEB)

Feuston, M.H.; Mackerer, C.R.; Schreiner, C.A.; Hamilton, C.E. [Stonybrook Labs., Inc., Princeton, NJ (United States)

1997-12-31

Two crude oils, differing in viscosity (V) and nitrogen (N) and sulfur (S) content, were evaluated for systemic toxicity, In the Crude I (low V, low N, low S) study, the material was applied to the clipped backs of rats at dose levels of 0, 30, 125, and 500 mg/kg. In the Crude II (high V, high N, moderate S) study, the oil was applied similarly at the same dose levels. The crude oils were applied for 13 wk, 5 d/wk. Exposure sites were not occluded. Mean body weight gain (wk 1-14) was significantly reduced in male rats exposed to Crude II; body weight gain of all other animals was not adversely affected by treatment. An increase in absolute (A) and relative (R) liver weights and a decrease in A and R thymus weights were observed in male and female rats exposed to Crude II at 500 mg/kg; only liver weights (A and R) were adversely affected in male and female rats exposed to Crude I. In general, there was no consistent pattern of toxicity for serum chemistry endpoints; however, more parameters were adversely affected in Crude II-exposed female rats than in the other exposed groups. A consistent pattern of toxicity for hematology endpoints was observed among male rats exposed to Crude I and male and female rats exposed to Crude II. Parameters affected included: Crudes I and II, red blood cell count, hemoglobin, and hematocrit, Crude II, platelet count. Microscopic evaluation of tissues revealed the following treatment-related findings: Crude I, treated skin, thymus, and thyroid; Crude II, bone marrow, treated skin, thymus, and thyroid. The LOEL (lowest observable effect level) for skin irritation and systemic toxicity (based on marginal effects on the thyroid) for both crude oils was 30 mg/kg; effects were more numerous and more pronounced in animals exposed to Crude II. Systemic effects are probably related to concentrations of polycyclic aromatic compounds (PAC) found in crude oil.

System Theoretic Dependability Analysis of the LHC Superconducting Magnet Circuit Protection

CERN Document Server

AUTHOR|(CDS)2254970

Subject of the present work is the application of the methods STPA (System Theoretic Process Analysis) and CAST (Causal Analysis based on STAMP) to analyze the protection systems of the superconducting magnet circuit of the LHC at CERN, Geneva. The named methods are derived from the at MIT developed STAMP (System Theoretic Accident Model and Processes) accident model. The CAST method was applied to the analysis of the 2008 Incident during the Hardware Commissioning. An incorrect interconnection between two magnets damaged the accelerator severely. The analysis defines the control structure of the Commissioning and investigates every subsystem and the interaction between the components. The results were social and technical requirements. Among others, it shows the necessity for safety culture at CERN and a revision of the magnet interconnection process. The present analysis found the same root causes for the incident than a task force did in 2009. Further, the CAST analysis found more, socio-technica...

Applied computation and security systems

CERN Document Server

Saeed, Khalid; Choudhury, Sankhayan; Chaki, Nabendu

2015-01-01

This book contains the extended version of the works that have been presented and discussed in the First International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2014) held during April 18-20, 2014 in Kolkata, India. The symposium has been jointly organized by the AGH University of Science & Technology, Cracow, Poland and University of Calcutta, India. The Volume I of this double-volume book contains fourteen high quality book chapters in three different parts. Part 1 is on Pattern Recognition and it presents four chapters. Part 2 is on Imaging and Healthcare Applications contains four more book chapters. The Part 3 of this volume is on Wireless Sensor Networking and it includes as many as six chapters. Volume II of the book has three Parts presenting a total of eleven chapters in it. Part 4 consists of five excellent chapters on Software Engineering ranging from cloud service design to transactional memory. Part 5 in Volume II is on Cryptography with two book...

Solving large scale unit dilemma in electricity system by applying commutative law

Science.gov (United States)

Legino, Supriadi; Arianto, Rakhmat

2018-03-01

The conventional system, pooling resources with large centralized power plant interconnected as a network. provides a lot of advantages compare to the isolated one include optimizing efficiency and reliability. However, such a large plant need a huge capital. In addition, more problems emerged to hinder the construction of big power plant as well as its associated transmission lines. By applying commutative law of math, ab = ba, for all a,b €-R, the problem associated with conventional system as depicted above, can be reduced. The idea of having small unit but many power plants, namely “Listrik Kerakyatan,” abbreviated as LK provides both social and environmental benefit that could be capitalized by using proper assumption. This study compares the cost and benefit of LK to those of conventional system, using simulation method to prove that LK offers alternative solution to answer many problems associated with the large system. Commutative Law of Algebra can be used as a simple mathematical model to analyze whether the LK system as an eco-friendly distributed generation can be applied to solve various problems associated with a large scale conventional system. The result of simulation shows that LK provides more value if its plants operate in less than 11 hours as peaker power plant or load follower power plant to improve load curve balance of the power system. The result of simulation indicates that the investment cost of LK plant should be optimized in order to minimize the plant investment cost. This study indicates that the benefit of economies of scale principle does not always apply to every condition, particularly if the portion of intangible cost and benefit is relatively high.

Stability Analysis of Neural Networks-Based System Identification

Directory of Open Access Journals (Sweden)

Talel Korkobi

2008-01-01

Full Text Available This paper treats some problems related to nonlinear systems identification. A stability analysis neural network model for identifying nonlinear dynamic systems is presented. A constrained adaptive stable backpropagation updating law is presented and used in the proposed identification approach. The proposed backpropagation training algorithm is modified to obtain an adaptive learning rate guarantying convergence stability. The proposed learning rule is the backpropagation algorithm under the condition that the learning rate belongs to a specified range defining the stability domain. Satisfying such condition, unstable phenomena during the learning process are avoided. A Lyapunov analysis leads to the computation of the expression of a convenient adaptive learning rate verifying the convergence stability criteria. Finally, the elaborated training algorithm is applied in several simulations. The results confirm the effectiveness of the CSBP algorithm.

Examining Cybersecurity of Cyberphysical Systems for Critical Infrastructures Through Work Domain Analysis.

Science.gov (United States)

Wang, Hao; Lau, Nathan; Gerdes, Ryan M

2018-04-01

The aim of this study was to apply work domain analysis for cybersecurity assessment and design of supervisory control and data acquisition (SCADA) systems. Adoption of information and communication technology in cyberphysical systems (CPSs) for critical infrastructures enables automated and distributed control but introduces cybersecurity risk. Many CPSs employ SCADA industrial control systems that have become the target of cyberattacks, which inflict physical damage without use of force. Given that absolute security is not feasible for complex systems, cyberintrusions that introduce unanticipated events will occur; a proper response will in turn require human adaptive ability. Therefore, analysis techniques that can support security assessment and human factors engineering are invaluable for defending CPSs. We conducted work domain analysis using the abstraction hierarchy (AH) to model a generic SCADA implementation to identify the functional structures and means-ends relations. We then adopted a case study approach examining the Stuxnet cyberattack by developing and integrating AHs for the uranium enrichment process, SCADA implementation, and malware to investigate the interactions between the three aspects of cybersecurity in CPSs. The AHs for modeling a generic SCADA implementation and studying the Stuxnet cyberattack are useful for mapping attack vectors, identifying deficiencies in security processes and features, and evaluating proposed security solutions with respect to system objectives. Work domain analysis is an effective analytical method for studying cybersecurity of CPSs for critical infrastructures in a psychologically relevant manner. Work domain analysis should be applied to assess cybersecurity risk and inform engineering and user interface design.

Common faults in turbines and applying neural networks in order to fault diagnostic by vibration analysis

International Nuclear Information System (INIS)

Masoudifar, M.; AghaAmini, M.

2001-01-01

Today the fault diagnostic of the rotating machinery based on the vibration analysis is an effective method in designing predictive maintenance programs. In this method, vibration level of the turbines is monitored and if it is higher than the allowable limit, vibrational data will be analyzed and the growing faults will be detected. But because of the high complexity of the system monitoring, the interpretation of the measured data is more difficult. Therefore, design of the fault diagnostic expert systems by using the expert's technical experiences and knowledge; seem to be the best solution. In this paper,at first several common faults in turbines are studied and the how applying the neural networks to interpret the vibrational data for fault diagnostic is explained

Accuracy of the Adomian decomposition method applied to the Lorenz system

International Nuclear Information System (INIS)

Hashim, I.; Noorani, M.S.M.; Ahmad, R.; Bakar, S.A.; Ismail, E.S.; Zakaria, A.M.

2006-01-01

In this paper, the Adomian decomposition method (ADM) is applied to the famous Lorenz system. The ADM yields an analytical solution in terms of a rapidly convergent infinite power series with easily computable terms. Comparisons between the decomposition solutions and the fourth-order Runge-Kutta (RK4) numerical solutions are made for various time steps. In particular we look at the accuracy of the ADM as the Lorenz system changes from a non-chaotic system to a chaotic one

Data acquisition and processing system for reactor noise analysis

International Nuclear Information System (INIS)

Costa Oliveira, J.; Morais Da Veiga, C.; Forjaz Trigueiros, D.; Pombo Duarte, J.

1975-01-01

A data acquisition and processing system for reactor noise analysis by time correlation methods is described, consisting in one to four data feeding channels (transducer, associated electronics and V/f converter), a sampling unit, a landline transmission system and a PDP 15 computer. This system is being applied to study the kinetic parameters of the 'Reactor Portugues de Investigacao', a swimming-pool 1MW reactor. The main features that make such a data acquisition and processing system a useful tool to perform noise analysis are: the improved characteristics of analog-to-digital converters employed to quantize the signals; the use of an on-line computer which allows a great accumulation and a rapid treatment of data together with an easy check of the correctness of the experiments; and the adoption of the time cross-correlation technique using two-detectors which by-pass the limitation of low efficiency detectors. (author)

PCARRD's strategies for technology transfer: The agriculture and resources regional technology information system and the regional applied communication program

International Nuclear Information System (INIS)

Stuart, T.H.; Mamon, C.R.

1990-05-01

This paper describes the Agriculture and Resources Regional Technology Information System (ARRTIS) and the Regional Applied Communication Outreach Program (RAC) of PCARRD. The ARRTIS and the RACO are the strategies in communicating scientific and technology-based information. The ARRTIS is an information system that provides an information base on the status of technologies at various levels of maturity (generation, adaptation, verification, piloting, dissemination and utilization) and offers technology alternatives based on environmental requirements, costs and returns analysis or feasibility of the technologies. This information base provides the repository of technology information from which the Applied Communication Program draws its information for packaging into various formats, using various strategies/media to cater to various users in the regions most especially the farmers. Meanwhile, as PCARRD executes its mission of developing the national research system, it incorporates a development support communication program through the RACO. The RACO is essentially a working component of a regional research center/consortium in each region coordinated by the Applied Communication Division of PCARRD. It aims at reaching farmers and their families, extensionists, administrators, policy makers and entrepreneurs with research information and technology which use a variety of appropriate communication channels, modern communication technology and strategies so that they may actively participate in research diffusion and utilization. (author). 7 refs

A novel bi-level meta-analysis approach: applied to biological pathway analysis.

Science.gov (United States)

Nguyen, Tin; Tagett, Rebecca; Donato, Michele; Mitrea, Cristina; Draghici, Sorin

2016-02-01

The accumulation of high-throughput data in public repositories creates a pressing need for integrative analysis of multiple datasets from independent experiments. However, study heterogeneity, study bias, outliers and the lack of power of available methods present real challenge in integrating genomic data. One practical drawback of many P-value-based meta-analysis methods, including Fisher's, Stouffer's, minP and maxP, is that they are sensitive to outliers. Another drawback is that, because they perform just one statistical test for each individual experiment, they may not fully exploit the potentially large number of samples within each study. We propose a novel bi-level meta-analysis approach that employs the additive method and the Central Limit Theorem within each individual experiment and also across multiple experiments. We prove that the bi-level framework is robust against bias, less sensitive to outliers than other methods, and more sensitive to small changes in signal. For comparative analysis, we demonstrate that the intra-experiment analysis has more power than the equivalent statistical test performed on a single large experiment. For pathway analysis, we compare the proposed framework versus classical meta-analysis approaches (Fisher's, Stouffer's and the additive method) as well as against a dedicated pathway meta-analysis package (MetaPath), using 1252 samples from 21 datasets related to three human diseases, acute myeloid leukemia (9 datasets), type II diabetes (5 datasets) and Alzheimer's disease (7 datasets). Our framework outperforms its competitors to correctly identify pathways relevant to the phenotypes. The framework is sufficiently general to be applied to any type of statistical meta-analysis. The R scripts are available on demand from the authors. sorin@wayne.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e

System for decision analysis support on complex waste management issues

International Nuclear Information System (INIS)

Shropshire, D.E.

1997-01-01

A software system called the Waste Flow Analysis has been developed and applied to complex environmental management processes for the United States Department of Energy (US DOE). The system can evaluate proposed methods of waste retrieval, treatment, storage, transportation, and disposal. Analysts can evaluate various scenarios to see the impacts to waste slows and schedules, costs, and health and safety risks. Decision analysis capabilities have been integrated into the system to help identify preferred alternatives based on a specific objectives may be to maximize the waste moved to final disposition during a given time period, minimize health risks, minimize costs, or combinations of objectives. The decision analysis capabilities can support evaluation of large and complex problems rapidly, and under conditions of variable uncertainty. The system is being used to evaluate environmental management strategies to safely disposition wastes in the next ten years and reduce the environmental legacy resulting from nuclear material production over the past forty years

Reliability analysis of safety systems of nuclear power plant and utility experience with reliability safeguarding of systems during specified normal operation

International Nuclear Information System (INIS)

Balfanz, H.P.

1989-01-01

The paper gives an outline of the methods applied for reliability analysis of safety systems in nuclear power plant. The main tasks are to check the system design for detection of weak points, and to find possibilities of optimizing the strategies for inspection, inspection intervals, maintenance periods. Reliability safeguarding measures include the determination and verification of the broundary conditions of the analysis with regard to the reliability parameters and maintenance parameters used in the analysis, and the analysis of data feedback reflecting the plant response during operation. (orig.) [de

Coupled response spectrum analysis of secondary systems using uncoupled modal properties

International Nuclear Information System (INIS)

Gupta, A.K.; Jaw Jingwen

1986-01-01

A method of performing coupled response spectrum analysis of secondary systems is presented. The response spectrum specified at the base of the primary system is used as the input. The complex coupled mode shapes along with frequencies and damping values are calculated using an efficient and accurate perturbation scheme. The new method is applied to a 2 DOF secondary system coupled with a 6 DOF secondary system. The masses and the stiffness of the secondary system are varied to get nine different cases. The coupled system is subjected to El Centro (S00E, 1940) ground motion. It is shown that the response values from the present method are in good agreement with those from the coupled time history analysis. The conventional floor response spectrum method gives response values which are consistently much higher than the corresponding values from the time history analysis. It is concluded that the present method is sufficiently straightforward and efficient, and that it yields accurate response values. (orig.)

Context-based object-of-interest detection for a generic traffic surveillance analysis system

NARCIS (Netherlands)

Bao, X.; Javanbakhti, S.; Zinger, S.; Wijnhoven, R.G.J.; With, de P.H.N.

2014-01-01

We present a new traffic surveillance video analysis system, focusing on building a framework with robust and generic techniques, based on both scene understanding and moving object-of-interest detection. Since traffic surveillance is widely applied, we want to design a single system that can be

An analysis of the control hierarchy modelling of the CMS detector control system

Energy Technology Data Exchange (ETDEWEB)

Hwong, Yi-Ling; et al.

2011-01-01

The supervisory level of the Detector Control System (DCS) of the CMS experiment is implemented using Finite State Machines (FSM), which model the behaviours and control the operations of all the sub-detectors and support services. The FSM tree of the whole CMS experiment consists of more than 30.000 nodes. An analysis of a system of such size is a complex task but is a crucial step towards the improvement of the overall performance of the FSM system. This paper presents the analysis of the CMS FSM system using the micro Common Representation Language 2 (mcrl2) methodology. Individual mCRL2 models are obtained for the FSM systems of the CMS sub-detectors using the ASF+SDF automated translation tool. Different mCRL2 operations are applied to the mCRL2 models. A mCRL2 simulation tool is used to closer examine the system. Visualization of a system based on the exploration of its state space is enabled with a mCRL2 tool. Requirements such as command and state propagation are expressed using modal mu-calculus and checked using a model checking algorithm. For checking local requirements such as endless loop freedom, the Bounded Model Checking technique is applied. This paper discusses these analysis techniques and presents the results of their application on the CMS FSM system.

Stability Analysis of a Microgrid System based on Inverter-Interfaced Distributed Generators

Directory of Open Access Journals (Sweden)

CUSIDO, J.

2013-08-01

Full Text Available This paper presents a phase-plane trajectory analysis and the appliance of Lyapunov's methodology to evaluate the stability limits of a small signal model of a Microgrid system. The work done is based on a non-linear tool and several computer simulations. The study indicates how to analyze a Microgrid system that is subjected to a severe transient disturbance by using its large signal model without the necessity of the small signal analysis as it is commonly applied.

Contemporary approaches to control system specification and design applied to KAON

International Nuclear Information System (INIS)

Ludgate, G.A.; Osberg, E.A.; Dohan, D.A.

1991-05-01

Large data acquisition and control systems have evolved from early centralized computer systems to become multi-processor, distributed systems. While the complexity of these systems has increased our ability to reliably manage their construction has not kept pace. Structured analysis and real-time structured analysis have been used successfully to specify systems but, from a project management viewpoint, both lead to different classes of problems during implementation and maintenance. The KAON Factory central control system study employed a uniform approach to requirements analysis and architectural design. The methodology was based on well established object-oriented principles and was free of the problems inherent in the older methodologies. The methodology is presently being used to implement two systems at TRIUMF. (Author) 12 refs

Analysis of complex systems using neural networks

International Nuclear Information System (INIS)

Uhrig, R.E.

1992-01-01

The application of neural networks, alone or in conjunction with other advanced technologies (expert systems, fuzzy logic, and/or genetic algorithms), to some of the problems of complex engineering systems has the potential to enhance the safety, reliability, and operability of these systems. Typically, the measured variables from the systems are analog variables that must be sampled and normalized to expected peak values before they are introduced into neural networks. Often data must be processed to put it into a form more acceptable to the neural network (e.g., a fast Fourier transformation of the time-series data to produce a spectral plot of the data). Specific applications described include: (1) Diagnostics: State of the Plant (2) Hybrid System for Transient Identification, (3) Sensor Validation, (4) Plant-Wide Monitoring, (5) Monitoring of Performance and Efficiency, and (6) Analysis of Vibrations. Although specific examples described deal with nuclear power plants or their subsystems, the techniques described can be applied to a wide variety of complex engineering systems

Analysis and control of underactuated mechanical systems

CERN Document Server

Choukchou-Braham, Amal; Djemaï, Mohamed; Busawon, Krishna

2014-01-01

This monograph provides readers with tools for the analysis, and control of systems with fewer control inputs than degrees of freedom to be controlled, i.e., underactuated systems. The text deals with the consequences of a lack of a general theory that would allow methodical treatment of such systems and the ad hoc approach to control design that often results, imposing a level of organization whenever the latter is lacking. The authors take as their starting point the construction of a graphical characterization or control flow diagram reflecting the transmission of generalized forces through the degrees of freedom. Underactuated systems are classified according to the three main structures by which this is found to happen—chain, tree, and isolated vertex—and control design procedures proposed. The procedure is applied to several well-known examples of underactuated systems: acrobot; pendubot; Tora system; ball and beam; inertia wheel; and robotic arm with elastic joint. The text is illustrated with MATL...

Outage Analysis of Asymmetric RF-FSO Systems

KAUST Repository

Ansari, Imran Shafique

2017-03-20

In this work, the outage performance analysis of a dual-hop transmission system composed of asymmetric radio frequency (RF) channels cascaded with free-space optical (FSO) links is presented. The RF links are modeled by the Rayleigh fading distribution and the FSO links are modeled by Malaga (M) turbulence distribution. The FSO links account for pointing errors and both types of detection techniques (i.e. heterodyne detection as well as intensity modulation/direct detection (IM/DD)). Transmit diversity is applied at the source, selection combining is applied at the destination, and the relay is equipped with single RF receive antenna and single aperture for relaying the information over FSO links. With this model, a new exact closed-form expression is derived for the outage probability of the end-to- end signal-to-noise ratio of such communication systems in terms of the Meijer\\'s G function under fixed amplify-and-forward relay scheme. All new analytical results are verified via computer-based Monte-Carlo simulations and are illustrated by some selected numerical results.

45 CFR 310.25 - What conditions apply to acquisitions of Computerized Tribal IV-D Systems?

Science.gov (United States)

2010-10-01

... FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Funding for Computerized Tribal IV-D Systems and Office Automation § 310.25 What conditions apply to... 45 Public Welfare 2 2010-10-01 2010-10-01 false What conditions apply to acquisitions of...

Conversation after Right Hemisphere Brain Damage: Motivations for Applying Conversation Analysis

Science.gov (United States)

Barnes, Scott; Armstrong, Elizabeth

2010-01-01

Despite the well documented pragmatic deficits that can arise subsequent to Right Hemisphere Brain Damage (RHBD), few researchers have directly studied everyday conversations involving people with RHBD. In recent years, researchers have begun applying Conversation Analysis (CA) to the everyday talk of people with aphasia. This research programme…

Phosphoproteomics-based systems analysis of signal transduction networks

Directory of Open Access Journals (Sweden)

Hiroko eKozuka-Hata

2012-01-01

Full Text Available Signal transduction systems coordinate complex cellular information to regulate biological events such as cell proliferation and differentiation. Although the accumulating evidence on widespread association of signaling molecules has revealed essential contribution of phosphorylation-dependent interaction networks to cellular regulation, their dynamic behavior is mostly yet to be analyzed. Recent technological advances regarding mass spectrometry-based quantitative proteomics have enabled us to describe the comprehensive status of phosphorylated molecules in a time-resolved manner. Computational analyses based on the phosphoproteome dynamics accelerate generation of novel methodologies for mathematical analysis of cellular signaling. Phosphoproteomics-based numerical modeling can be used to evaluate regulatory network elements from a statistical point of view. Integration with transcriptome dynamics also uncovers regulatory hubs at the transcriptional level. These omics-based computational methodologies, which have firstly been applied to representative signaling systems such as the epidermal growth factor receptor pathway, have now opened up a gate for systems analysis of signaling networks involved in immune response and cancer.

Modeling and Analysis of Power Processing Systems (MAPPS). Volume 1: Technical report

Science.gov (United States)

Lee, F. C.; Rahman, S.; Carter, R. A.; Wu, C. H.; Yu, Y.; Chang, R.

1980-01-01

Computer aided design and analysis techniques were applied to power processing equipment. Topics covered include: (1) discrete time domain analysis of switching regulators for performance analysis; (2) design optimization of power converters using augmented Lagrangian penalty function technique; (3) investigation of current-injected multiloop controlled switching regulators; and (4) application of optimization for Navy VSTOL energy power system. The generation of the mathematical models and the development and application of computer aided design techniques to solve the different mathematical models are discussed. Recommendations are made for future work that would enhance the application of the computer aided design techniques for power processing systems.

Development of an evaluation method for seismic isolation systems of nuclear power facilities. Seismic design analysis methods for crossover piping system

International Nuclear Information System (INIS)

Tai, Koichi; Sasajima, Keisuke; Fukushima, Shunsuke; Takamura, Noriyuki; Onishi, Shigenobu

2014-01-01

This paper provides seismic design analysis methods suitable for crossover piping system, which connects between seismic isolated building and non-isolated building in the seismic isolated nuclear power plant. Through the numerical study focused on the main steam crossover piping system, seismic response spectrum analysis applying ISM (Independent Support Motion) method with SRSS combination or CCFS (Cross-oscillator, Cross-Floor response Spectrum) method has found to be quite effective for the seismic design of multiply supported crossover piping system. (author)

Development of the versatile reactor analysis code system, MARBLE2

International Nuclear Information System (INIS)

Yokoyama, Kenji; Jin, Tomoyuki; Hazama, Taira; Hirai, Yasushi

2015-07-01

The second version of the versatile reactor analysis code system, MARBLE2, has been developed. A lot of new functions have been added in MARBLE2 by using the base technology developed in the first version (MARBLE1). Introducing the remaining functions of the conventional code system (JOINT-FR and SAGEP-FR), MARBLE2 enables one to execute almost all analysis functions of the conventional code system with the unified user interfaces of its subsystem, SCHEME. In particular, the sensitivity analysis functionality is available in MARBLE2. On the other hand, new built-in solvers have been developed, and existing ones have been upgraded. Furthermore, some other analysis codes and libraries developed in JAEA have been consolidated and prepared in SCHEME. In addition, several analysis codes developed in the other institutes have been additionally introduced as plug-in solvers. Consequently, gamma-ray transport calculation and heating evaluation become available. As for another subsystem, ORPHEUS, various functionality updates and speed-up techniques have been applied based on user experience of MARBLE1 to enhance its usability. (author)

Effects of applying three-dimensional seismic isolation system on the seismic design of FBR

International Nuclear Information System (INIS)

Hirata, Kazuta; Yabana, Shuichi; Kanazawa, Kenji; Matsuda, Akihiro

1997-01-01

In this study conceptional three-dimensional seismic isolation system for fast breeder reactor (FBR) is proposed. Effects of applying three-dimensional seismic isolation system on the seismic design for the FBR equipment are evaluated quantitatively. From the evaluation, it is concluded following effects are expected by applying the three-dimensional seismic isolation system to the FBR and the effects are evaluated quantitatively. (1) Reduction of membrane thickness of the reactor vessel (2) Suppression of uplift of fuels by reducing vertical seismic response of the core (3) Reduction of the supports for the piping system (4) Three-dimensional base isolation system for the whole reactor building is advantageous to the combined isolation system of horizontal base isolation for the reactor building and vertical isolation for the equipment. (author)

Applied systems ecology: models, data, and statistical methods

Energy Technology Data Exchange (ETDEWEB)

Eberhardt, L L

1976-01-01

In this report, systems ecology is largely equated to mathematical or computer simulation modelling. The need for models in ecology stems from the necessity to have an integrative device for the diversity of ecological data, much of which is observational, rather than experimental, as well as from the present lack of a theoretical structure for ecology. Different objectives in applied studies require specialized methods. The best predictive devices may be regression equations, often non-linear in form, extracted from much more detailed models. A variety of statistical aspects of modelling, including sampling, are discussed. Several aspects of population dynamics and food-chain kinetics are described, and it is suggested that the two presently separated approaches should be combined into a single theoretical framework. It is concluded that future efforts in systems ecology should emphasize actual data and statistical methods, as well as modelling.

Thermal-economic analysis of cogeneration systems

International Nuclear Information System (INIS)

Walter, A.C.S.; Bajay, S.V.

1992-01-01

Approximately 80 countries produce sugar, and fortuitously alcohol, from sugar cane. In all these countries the cogeneration technology of steam turbines is utilized, although almost always inefficient. The greater potential of cogeneration in Brazil is in sugar and alcohol sector, because of the use of sugar cane bagasse as combustible. This work applies the techniques of simulation and economic analysis to different configuration of plants, to determine power generation and associated costs of each alternative. The application of the same procedure at operating condition of several configurations in transient system permits the determination of production profile of exceeding during one day. (C.M.)

Safeguards systems analysis research and development and the practice of safeguards at DOE facilities

International Nuclear Information System (INIS)

Zack, N.R.; Thomas, K.E.; Markin, J.T.; Tape, J.W.

1991-01-01

Los Alamos Safeguards Systems Group personnel interact with Department of Energy (DOE) nuclear materials processing facilities in a number of ways. Among them are training courses, formal technical assistance such as developing information management or data analysis software, and informal ad hoc assistance especially in reviewing and commenting on existing facility safeguards technology and procedures. These activities are supported by the DOE Office of Safeguards and Security, DOE Operations Offices, and contractor organizations. Because of the relationships with the Operations Office and facility personnel, the Safeguards Systems Group research and development (R and D) staff have developed an understanding of the needs of the entire complex. Improved safeguards are needed in areas such as materials control activities, accountability procedures and techniques, systems analysis and evaluation methods, and material handling procedures. This paper surveys the generic needs for efficient and cost effective enhancements in safeguards technologies and procedures at DOE facilities, identifies areas where existing safeguards R and D products are being applied or could be applied, and sets a direction for future systems analysis R and D to address practical facility safeguards needs

THE ANALYSIS OF SEWAGE SYSTEM INFLUENCE ON RECEIVERS

Directory of Open Access Journals (Sweden)

Kamil Pluta

2015-11-01

Full Text Available Reducing waste water discharges to the receiver is now one of the most important activities to ensure the protection of surface waters. This is caused mainly by progressive urbanization and increasing impervious surfaces. Discharge of sewage with a large load of pollutants affect the receivers in a negative way. The quality of waste water varies and depends on many factors, but above all, it is closely linked with sewer system applied to the drainage catchment. The article presents a comparative analysis of the environmental impact of three basic sewer systems: combined, separate and semi-separate. The analysis was performed for a typical urban catchment, using the average concentration of the basic indicators of pollution, which total suspended solids, nitrogen and phosphorus, COD, BOD5, selected heavy metals are merked. The results concluded that each of these sewer systems characterized by varying environmental impacts depending on the indicator of pollution. The best of today available technical solutions seem to be semi-separate sewer system, using the storage tank with the control in real time (RTC for controlling the flow.

Understanding Interdependencies between Heterogeneous Earth Observation Systems When Applied to Federal Objectives

Science.gov (United States)

Gallo, J.; Sylak-Glassman, E.

2017-12-01

We will present a method for assessing interdependencies between heterogeneous Earth observation (EO) systems when applied to key Federal objectives. Using data from the National Earth Observation Assessment (EOA), we present a case study that examines the frequency that measurements from each of the Landsat 8 sensors are used in conjunction with heterogeneous measurements from other Earth observation sensors to develop data and information products. This EOA data allows us to map the most frequent interactions between Landsat measurements and measurements from other sensors, identify high-impact data and information products where these interdependencies occur, and identify where these combined measurements contribute most to meeting a key Federal objective within one of the 13 Societal Benefit Areas used in the EOA study. Using a value-tree framework to trace the application of data from EO systems to weighted key Federal objectives within the EOA study, we are able to estimate relative contribution of individual EO systems to meeting those objectives, as well as the interdependencies between measurements from all EO systems within the EOA study. The analysis relies on a modified Delphi method to elicit relative levels of reliance on individual measurements from EO systems, including combinations of measurements, from subject matter experts. This results in the identification of a representative portfolio of all EO systems used to meet key Federal objectives. Understanding the interdependencies among a heterogeneous set of measurements that modify the impact of any one individual measurement on meeting a key Federal objective, especially if the measurements originate from multiple agencies or state/local/tribal, international, academic, and commercial sources, can impact agency decision-making regarding mission requirements and inform understanding of user needs.