WorldWideScience

Sample records for applications study areas

  1. Multiparameter radar study of rainfall: Potential application to area-time integral studies

    Science.gov (United States)

    Raghavan, R.; Chandrasekar, V.

    1994-01-01

    Multiparameter radars measure one or more additional parameters in addition to the coventional reflectivity factor. The combination of radar observations from a multiparameter radar is used to study the time evolution of rainstorms. A technique is presented to self-consistently compare the area-time integral (ATI) and rainfall volume estimates from convective storms, using two different measurements from a multiparameter radar. Rainfall volumes for the lifetime of individual storms are computed using the reflectivity at S band (10-cm wavelength) as well as one-way specific attenuation at X band (3-cm wavelength). Area-time integrals are computed by summing all areas in each radar snapshot having reflectivities (S band) in excess of a preselected threshold. The multiparameter radar data used in this study were acquired by the National Center for Atmospheric Research (NCAR) CP-2 radar during the Cooperative Huntsville Meteorological Experiment (COHMEX) and the Convection and Precipitation/Electrification Experiment (CaPE), respectively. ATI studies were accomplished in this work using multiparameter radar data acquired during the lifetime of six convective events that occurred in the COHMEX radar coverage area. A case study from the COMHEX field campaign (20 July 1986) was selected to depict the various stages in the evolution of a storm over which the ATI and rainfall volume computations were performed using multiparameter radar data. Another case study from the CaPE field campaign (12 August 1991) was used to demonstrate the evolution of a convective cell based on differential reflectivity observations.

  2. A study of the applicability of local area networks to distributed control systems in LMFBRs

    International Nuclear Information System (INIS)

    As a result of the integration of computer communications technology, flexible local area networks (LANs) have been developed, principally to meet the needs of commercial data processing applications. With special provisions, these may be used in process control for the implementation of distributed control and high-performance control strategies. The paper describes part of a project in which LAN principles and commercially available systems were assessed for this purpose. In nuclear reactor control systems, local area networks are able to provide the flexibility of communications required by up-to-date control methods; in protection systems, they are able to reduce the problems associated with the gathering of large volumes of data. If a rational method is used in designing the network, other benefits are available, such as improved system diagnostics, easier commissioning and high availability through reduced downtimes. The requirements for such a network are discussed in this paper and the particular features of a local area communications network suitable for nuclear power plants are identified. These include choice of medium, topology and access method, and specification of reliability, availability, and commissioning and diagnostic aids. (author)

  3. Application of isotopic techniques for study of ground water from karstic areas. 2. Flow model

    International Nuclear Information System (INIS)

    Isotopic tracer method was used to determine flow paths, recharge and discharge areas for ground water in the karst of vicinity of Danube Delta Ecosystem. The spatial variation and the sets of isoconcentration lines for the deuterium average content correlated with the origin of the waters were the analytical tools for the analysis of the ground water flow paths, recharge and discharge areas in the karst. The study indicates that area is compartmentalized in four hydrological subareas: 1) the Northern part of the study area; 2) the second is part of Southwestern for which flow paths have a local character; 3) the third is the phreatic system that recharges from the Danube River. Flow paths are towards Southeastern and in Colina sink zone; 4) the last is mixing aquifer. The waters originated from mixing processes between the water with lower δD and the waters with high δD discharge in the Northern part of Razelm Lake, below the level of the lake's water. The deuterium content provides control and direct evidence of the high altitude water (above 1000 m) movement in limestone. In the substructures 1, 2 and 3 the intrusion of light isotopic water in the karst of study area occurs by conduit flow and the limestone drainage occurs by diffuse flow. The limestone drainage in mixing aquifer (substructures 4) is of conduit flow type. The hydrostatic pressure and the geometry of conduits control the movement of the light isotopic water. The isoline maps for deuterium content point out both flow path of ground water and heterogeneity of geological structure. (authors)

  4. Application of the protocol for marine biological valuation to selected case study areas

    OpenAIRE

    Derous, S.; Courtens, W; Deckers, P.; Deneudt, K.; Forero, C.E.; Hostens, K.; Moulaert, I.; Stienen, E.W.M.; Vanden Eede, S.; Van Lancker, V. R. M; Verfaillie, E; Vincx, M.; Degraer, S.

    2008-01-01

    Marine biological valuation integrates all biological and ecological information that is available for a study area into a relative biological value. The resulting biological valuation map (BVM) is easy to interpret and translates complex scientific data into a tool that can be used by policy makers as a baseline layer for spatial planning at sea. When such BVM is lacking, managers can only trust on the available best expert judgement to include biological aspects into their decisions, a proc...

  5. Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

    Science.gov (United States)

    Happonen, A.; Stepanov, A.; Piili, H.

    Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

  6. Area studies after poststructuralism

    OpenAIRE

    J K Gibson-Graham

    2004-01-01

    In this paper we address the question of 'what next after poststructuralism' through a reassessment of area studies. In a narrative of our own involvement with place-oriented research and institutions, we examine the traditional position of area studies in geography and anthropology and its reevaluation by poststructuralist scholars in a number of disciplines. We argue that both prestructuralist and poststructuralist treatments of areas are oriented by a narrative of capitalist development; a...

  7. Application of isotopic and chemical methods to the study of hydrological problems in Brazilian northeastern areas

    International Nuclear Information System (INIS)

    Hydrological studies are reported with samples of ground water from several region of northern - and northeastern Brazil: Marajo Island (State of Para), State of Piaui, Ceara and Rio Grande do Norte. A description is given of the utilization of chemical and isotopic methods, in particular measurements of tritium concentration and 14C- counting techniques for the determination of the origin and residence time of water. (I.C.R.)

  8. Measurement of cerebral blood flow by single photon emission tomography: principles and application to functional studies of the language areas

    International Nuclear Information System (INIS)

    Quantitative measurement of cerebral blood flow by single photon emission computerized tomography (SPECT) is a new technique which is particularly suitable for routine studies of cerebro-vascular diseases. SPECT can be used to examine the deep structures of the brain and cerebellum. The functional areas of the brain, which have hitherto been only accessible by clinical-anatomical methods, can be imaged by this technique, based on the correlation between cerebral blood flow and metabolism. The demonstration of preferential activation of temporal and frontal zones in the left hemisphere by active speech stimulation confirms the general principles of hemispheric lateralization of cerebral functions. In addition to this role in studying the physiology of normal subjects, the technique has practical pathological applications. Knowledge of hemispheric lateralization of spoken language should be a pre-operative test for cerebral lesion when there is a risk that surgical intervention may produce irreversible neuropsychological lesions

  9. A preliminary study for the application of retrospective radon measurements in epidemiological studies in the Schneeberg area

    International Nuclear Information System (INIS)

    An epidemiological study is under way in the Schneeberg/Schlema region where radon concentration in dwellings were found to vary between 10 Bq/m3 and 10 kBq/m3. For several reasons, indoor radon levels are expected to have considerably varied over the past decades. To take these potential fluctuations into account, indoor radon concentration measurements should be combined with retrospective measurements. In this way, possible outliners in the epidemiological study could be sorted out. (A.K.)

  10. Air Pollution Prevention Applications for the Transport Sector by Integrating Urban Area Transport and Vehicle Emission Models with the Case Study of Bangkok, Thailand

    OpenAIRE

    Padet Praditphet

    2009-01-01

    This study proposes air pollution prevention applications for urban area transportation aimed at minimizing pollution and meeting ambient air quality standards through the use of transport and vehicle emissions models that account for air pollution changes resulting from prevention strategies. This study combines pollution prevention techniques and transport and vehicle emissions models to enhance air pollution prevention in an urban area. The amount of air emissions from transportation conti...

  11. Thermal energy storage application areas

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-01

    The use of thermal energy storage in the areas of building heating and cooling, recovery of industrial process and waste heat, solar power generation, and off-peak energy storage and load management in electric utilities is reviewed. (TFD)

  12. Unit 51 - GIS Application Areas

    OpenAIRE

    Unit 54, CC in GIS; Cowen, David; Ferguson, Warren

    1990-01-01

    This unit begins a six-part section that reviews the spectrum of different applications of GIS. It characterizes the core groups of GIS activity in terms of three categories: (1) mature technologies that interact with GIS sharing its technology and creating data for it; (2) management and decision-making groups; and (3) science and research activities at universities and government labs. This unit focuses on the first category, exploring GIS applications in cartography, surveying and engineer...

  13. Laguna Atascosa Wilderness study area

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Laguna Atascosa National Wildlife Refuge. It discusses the history of the study area, its...

  14. Study on applicability of method for uplift evaluation by fluvial terrace inland area. An approach by emphasizing empirical index

    International Nuclear Information System (INIS)

    Uplift estimation during late Quaternary is required for site selection of geological disposal facility of high level radioactive waste. Marine and fluvial terraces are key indicators for uplift estimation, but the stratigraphy of fluvial terraces was not described well inland area across Japan. We carried out the literature survey on terrace in Japan in order to investigate the distribution of fluvial terraces in addition to late Pleistocene marine terraces which have been recognized on the coastal area, and confirmed possibility of uplift characterization inland areas. Marine and fluvial terraces distribution, which seems contributory to uplift estimation, was confirmed in 70% widespread area of 1/50,000 topographic map distribution, and we can obtain the out look for the possibility of uplift estimation in at least the past 100,000 years. We can also obtain the out look for the possibility of correlation of MIS6 and younger terraces by means of comprehensive consideration of the information related to chronology and correlation of terraces, which are grades of terrace surface dissection, terrace gravels and covering layers weathering, in 50 regions of typical area across Japan. We confirmed that terrace surface dissection, weathering of terrace gravels and covering layers are good indexes for terrace correlation which can be adopted in wide area across Japan. Terrace surface dissection has no regional differences as an indicator of age in wide area of Japan. On the other hand, weathered terrace gravel and red soil in covering layer of terrace tend to appear on younger terraces in the southwest Japan than the northeast. Based on the above results, we proposed a specific considerations and procedure in a comprehensive terrace correlation and chronology for the Literature and the Preliminary investigation of site estimation for HLW. (author)

  15. The carbon transfer in karst areas - an application to the study of environmental changes and paleoclimatic reconstruction

    International Nuclear Information System (INIS)

    Karst areas constitute a large part of Slovenia, with several thousands of caves located in the limestone formations. The karstic caves provide valuable resources for reconstruction of environmental conditions on the continent in the past. This is possible due to the great stability of climatic conditions within a cave. Secondary minerals deposited in caves, known as speleothems, preserve records of long-term climatic and environmental changes at the site of their deposition and in the vicinity. The purity of speleothems and their chemical and physical stability make them exceptionally well suited for detailed geochemical and isotopic analysis.To understand the processes influencing the speleothem isotopic composition, monitoring of cave waters as well as springs and underground rivers is very important for at least one hydrological cycle. In this way we can observe the influence of seasonal changes on the cave waters feeding stalagmite growth laminae. Chemical and environmental parameters which influence speleothem formation are the temperature of air and water, as well as the properties of the water such as pH, electrical conductivity, Ca2+, HCO3- and Mg2+ ion concentrations and drip rate. The thickness of the roof above the cave and the types of cave water may also determine the water properties. During one year monthly water samples were collected at three locations in Postojna cave to characterise different types of cave waters (pool, fast and stalactite drip water), and also from the river Pivka and spring Mocilnik. Rainwater samples were also collected and analysed. Dissolved CO2 and carbonate in cave seepage waters originate from various sources: atmospheric CO2, organic matter that decomposes in soil, CO2 from respiration of plants in the soil, and the dissolution of old layers of limestone. The isotopic composition of speleothems is directly linked with the isotopic composition of CO2 produced in the soil above the cave. Production of CO2 in the soil is

  16. An Application for Regional Coastal Erosion Processes in Urban Areas: A Case Study of the Golden Horseshoe in Canada

    Directory of Open Access Journals (Sweden)

    Eric Vaz

    2013-11-01

    Full Text Available Urban growth has had unprecedented consequences on environmental sustainability and anthropogenic activity. The eroding coastlines throughout the world are subject to the massive expansion of urban areas and the accountability of sustainable hinterland landscapes. The Golden Horseshoe is Canada’s fastest growing region extending from the Niagara Peninsula and one of the most active economic regions in North America. This paper adopts a combined assessment of land use change and transitions in the coastal stretches of the Greater Golden Horseshoe. Comprising the urban expansion of the region between 1990 and 2011, an integrated assessment was carried out to: (i detect changes in coastal lines along Lake Ontario; (ii derive land use changes along the coast through spatial accounting matrices; and (iii integrate climate change data for a combined assessment of future erosion loci. Visible erosion was found between the decade of 1990 and 2000, while certain areas have shown coastal recession in the southern region. The maximum recession was found to be 30 m, with an increasing urban sprawl of 19.8% between 1990 and 2000. A combined temperature increase of 2 °C over the coming decades brings the increase in urban heat islands leading to the importance of combined land policies to mitigate the common problem of erosion in vulnerable urban stretches and liveability concerning spatial resilience of growing urban regions in North America.

  17. Air Pollution Prevention Applications for the Transport Sector by Integrating Urban Area Transport and Vehicle Emission Models with the Case Study of Bangkok, Thailand

    Directory of Open Access Journals (Sweden)

    Padet Praditphet

    2009-01-01

    Full Text Available This study proposes air pollution prevention applications for urban area transportation aimed at minimizing pollution and meeting ambient air quality standards through the use of transport and vehicle emissions models that account for air pollution changes resulting from prevention strategies. This study combines pollution prevention techniques and transport and vehicle emissions models to enhance air pollution prevention in an urban area. The amount of air emissions from transportation continues to rise as travel patterns expand, necessitating reduced pollution emissions from the transportation sector. This study aims to probe the major causes for the increase in air pollutants in the transportation sector of Bangkok and proposes a feasible method capable of reducing and controlling its associated air pollution. Furthermore, the results suggest that the most effective countermeasures to transportation-based air emissions include four potential solutions that promote the use of Natural Gas Vehicle (NGV buses and the institution of rerouting existing services. The current study can be used to formulate policies related to air pollution on a macro scale.

  18. Application of seismic velocity tomography in underground coal mines: A case study of Yima mining area, Henan, China

    Science.gov (United States)

    Cai, Wu; Dou, Linming; Cao, Anye; Gong, Siyuan; Li, Zhenlei

    2014-10-01

    A better understanding of geological structures, stress regimes, and rock burst risks around longwall mining panels can allow for higher extraction efficiency with reduced safety concerns. In this paper, the stress change of rock mass was first examined by using ultrasonic technique into laboratory-scale rock samples. Subsequently, the active and passive seismic velocity tomograms were simultaneously applied into two study cases with field-scale. Similar characteristics can be found between the active and passive tomography results. More specifically, in the first case, a geological discontinuity was clearly indicated by a linear image in both active and passive seismic tomography results. The results of the second case suggest that seismic tomography can be used to infer stress redistribution, and assess rock burst hazard or locate high-seismicity zones. Ultimately, comparisons have been made between the results of active and passive seismic tomography. Active tomography is found to be better applied in accurately detecting stress distribution and geological structures prior to the extraction of longwall panels, while passive tomography has advantages in continuously monitoring the stress changes and assessing rock burst potential during the mining of longwall panels. This study is expected to increase the safety and efficiency of the underground mining.

  19. Rurality study of restricted areas

    Directory of Open Access Journals (Sweden)

    Sergio Rivaroli

    2011-02-01

    Full Text Available Two main perspectives of investigation emerge from the study of a territory’s rurality: a geographical approach and a sociological approach. The research examines the sub-regional study case of ‘Nuovo circondario imolese’. The analysis shows that the combination of traditional institutional criteria with detailed informations about the territory, generates more accurate results which determine a better comprehension of the characteristics of restricted areas’ rurality. Over the period 1991-2001, the study highlights an increase in rural areas. This result could be interpreted as an effect of urban sprawl’s intensification, that increases the competition between non-farm residences and agricultural activities.

  20. ANALYSIS OF WEB MINING APPLICATIONS AND BENEFICIAL AREAS

    OpenAIRE

    Khaleel Ahmad

    2011-01-01

    The main purpose of this paper is to study the process of Web mining techniques, features, application ( e-commerce and e-business) and its beneficial areas. Web mining has become more popular and its widely used in varies application areas (such as business intelligent system, e-commerce and e-business). The e-commerce or e-business results are bettered by the application of the mining techniques such as data mining and text mining, among all the mining techniques web mining is better.

  1. ANALYSIS OF WEB MINING APPLICATIONS AND BENEFICIAL AREAS

    Directory of Open Access Journals (Sweden)

    Khaleel Ahmad

    2011-10-01

    Full Text Available The main purpose of this paper is to study the process of Web mining techniques, features, application ( e-commerce and e-business and its beneficial areas. Web mining has become more popular and its widely used in varies application areas (such as business intelligent system, e-commerce and e-business. The e-commerce or e-business results are bettered by the application of the mining techniques such as data mining and text mining, among all the mining techniques web mining is better.

  2. Selecting Map Projections in Minimizing Area Distortions in GIS Applications

    Directory of Open Access Journals (Sweden)

    Ahmet Kaya

    2008-12-01

    Full Text Available Varioussoftware for Geographical Information Systems (GISs have been developed and used in many different engineering projects. In GIS applications, map coverage is important in terms of performing reliable and meaningful queries. Map projections can be conformal, equal-area and equidistant. The goal of an application plays an important role in choosing one of those projections. Choosing the equal-area projection for an application in which area information is used (forestry, agriculture, ecosystem etc reduces the amount of distortion on the area, but many users using GIS ignore this fact and continue to use applications with present map sheets no matter in what map projection it is. For example, extracting area information from data whose country system’s map sheet is in conformal projection is relatively more distorted, compared to an equal-area projection one. The goal of this study is to make the best decision in choosing the most proper equal-area projection among the choices provided by ArcGIS 9.0, which is a popular GIS software package, and making a comparison on area errors when conformal projection is used. In this study, the area of parcels chosen in three different regions and geographic coordinates and whose sizes vary between 0.01 to 1,000,000 ha are calculated according to Transversal Mercator (TM, 3°, Universal Transversal Mercator (UTM, 6° and 14 different equal-area projections existing in the ArcGIS 9.0 GIS software package. The parcel areas calculated with geographical coordinates are accepted as definite. The difference between the sizes calculated according to projection coordinates and real sizes of the parcels are determined. Consequently, the appropriate projections are decided for the areas smaller and equal than 1,000 ha and greater than 1,000 ha in the GIS software package.

  3. Contribution of the SISCam Web-based GIS to the seismotectonic study of Campania (Southern Apennines): an example of application to the Sannio-area

    OpenAIRE

    Nappi, R.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, Italia; Alessio, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, Italia; Bronzino, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, Italia; Terranova, C.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, Italia; Vilardo, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, Italia

    2007-01-01

    In this article the implementation and potential of the Seismotectonic Information System of the Campania Region (SISCam) are described, in particular an application of this Web-based GIS system to the seismotectonic analysis of the Sannio area (Southern Apennines) is performed. WEB-GIS technologies greatly contribute to both the environmental monitoring and the disaster management of areas affected by high natural risks. Specifically the SISCam system has been developed with the aim...

  4. Hydrology of Ranger land application area

    International Nuclear Information System (INIS)

    In 1984 Ranger Uranium Mines (RUM) began assessing the technique of water treatment by land application as a means of reducing the volume of stored water within the Restricted Release Zone. Knowledge of the hydrological characteristics of the treatment site is necessary for optimal day to day and season to season operation of the system and as an input into the assessment of the long-term viability of the site. This paper provides background information on the hydrological requirements for a water treatment site, describes the RUM's water treatment by land application system and summarises the operational statistics and current hydrological knowledge of the site. The general groundwater hydrology of the area comprises a surface soil aquifer overlying a semi-confined aquifer. Drainage of the surface aquifer follows the surface topography along the sandy clays. Vertical permeability ranges between 3 and 12 times greater than horizontal permeability. 7 refs., 2 tabs., 4 figs

  5. Study of application of protective measures for the public and remediation of contaminated areas in case of nuclear and / or radiological accidents in Brazil

    International Nuclear Information System (INIS)

    Since the radiological accident in Goiania in 1987, the IRD (Institute of Radiological Protection and Dosimetry - IRD / CNEN) has been developing tools to support decision-making processes after a nuclear or radiological accident which leads to an environmental contamination and to an exposure of individuals the public These processes include the establishment of a supporting multicriteria model, which involves the application of protective and remediation measures of contaminated areas in tropical environments. In this study, it was performed an evaluation of the efficiency of these measures in order to determine the consequences of their implementation, based on results obtained from the code SIEM (Emergency Integrated System), which constitutes an environmental mode1 developed at IRD to simulate this type of accident. In order to perform this evaluation, it was first developed a database containing descriptions of various protection/remediation measures, which could be applied nationwide. Afterwards, some basic scenarios were established, considering the environmental, housing and food characteristics of the population of the vicinity of the nuclear power plants in Angra dos Reis (state of Rio de Janeiro). Thus, the accident simulations were carried out separately containing releases of 137Cs, 90Sr and 131 I. The results showed that the dose reduction varies according to the extent and the timing of the remediation measure applied. Although it is possible to establish some basic guidelines, generic solutions are not recommended, since the resulting doses are highly dependent on the actual situation. Any decision-making process should be made case by case, according to the actual conditions of the affected area and to the occupation characteristics and use of the affected areas, considering the characteristics of the source term of contamination, the time of the year in which the accident occurs, the local agricultural practices and food habits of real people

  6. 300 Area signal cable study

    International Nuclear Information System (INIS)

    This report was prepared to discuss the alternatives available for removing the 300 Area overhead signal cable system. This system, installed in 1969, has been used for various monitoring and communication signaling needs throughout the 300 Area. Over the years this cabling system has deteriorated, has been continually reconfigured, and has been poorly documented to the point of nonreliability. The first step was to look at the systems utilizing the overhead signal cable that are still required for operation. Of the ten systems that once operated via the signal cable, only five are still required; the civil defense evacuation alarms, the public address (PA) system, the criticality alarms, the Pacific Northwest Laboratory Facilities Management Control System (FMCS), and the 384 annunciator panel. Of these five, the criticality alarms and the FMCS have been dealt with under other proposals. Therefore, this study focused on the alternatives available for the remaining three systems (evacuation alarms, PA system, and 384 panel) plus the accountability aid phones. Once the systems to be discussed were determined, then three alternatives for providing the signaling pathway were examined for each system: (1) re-wire using underground communication ducts, (2) use the Integrated Voice/Data Telecommunications System (IVDTS) already installed and operated by US West, and (3) use radio control. Each alternative was developed with an estimated cost, advantages, and disadvantages. Finally, a recommendation was provided for the best alternative for each system

  7. Extended equal areas criterion: foundations and applications

    Energy Technology Data Exchange (ETDEWEB)

    Yusheng, Xue [Nanjim Automation Research Institute, Nanjim (China)

    1994-12-31

    The extended equal area criterion (EEAC) provides analytical expressions for ultra fast transient stability assessment, flexible sensitivity analysis, and means to preventive and emergency controls. Its outstanding performances have been demonstrated by thousands upon thousands simulations on more than 50 real power systems and by on-line operation records in an EMS environment of Northeast China Power System since September 1992. However, the researchers have mainly based on heuristics and simulations. This paper lays a theoretical foundation of EEAC and brings to light the mechanism of transient stability. It proves true that the dynamic EEAC furnishes a necessary and sufficient condition for stability of multi machine systems with any detailed models, in the sense of the integration accuracy. This establishes a new platform for further advancing EEAC and better understanding of problems. An overview of EEAC applications in China is also given in this paper. (author) 30 refs.

  8. Application of laser scanning and opto-electronic devices for monitoring cliff instability in the Campi Flegrei coastal area: the Coroglio case study ( Napoli, Italy)

    Science.gov (United States)

    Somma, R.; Caputo, T.; Esposito, G.; Marino, E.; Matano, F.; Carlino, S.; Iuliano, S.; Sacchi, M.; Troise, C.; De Natale, G.

    2013-12-01

    This study introduces a Terrestrial Laser Scanning (TLS) application for the landslides monitoring and its experiment in Gulf of Pozzuoli coastal area (Italy). This area is a part of the Campi Flegrei volcanic district, one of the major volcanic risk zones of the world, with more than 300.000 people and a lot of infrastructures concentrated within it. The cliffs consist of very erodible volcanoclastic lithologies as same as tuffs and ignimbrites, affected by the erosive action of both sea and meteorological agents, very high erosion rate. Furthermore, in this area the bradyseismic phenomenon occurred too, producing differential displacement and fracturing. The Coroglio test site was chosen taking into account cliff's geological and geomorphological properties, as well as aspect, fractures, lithology, and elements at risk located upslope or downslope: The Coroglio site is characterized by lithified upper member of the NYT with stratified, wavy-to-planar alternations of coarse-grained, disorganized, matrix-supported layers, thinly-laminated discontinuous beds and massive, even fine ash layers. The accuracy of the technique used reaches a detailed level in landslide monitoring which allows this methodology to be complementary to the monitoring by setup a geodetic deformation monitoring network. With this aim we have firstly reconstructed a 3D model of the investigated cliff with the use of dedicated softwares and successively analyzed the main lithological, structural and geomorphologic elements related to cliff instability processes. What is possible to confirm after this first study, can be here resumed: (1) These tests were designed to set-up landslide monitoring in highly urbanised areas such as the Campi Flegrei; they are very important sites with a well-established road network, which can be affected by landslide phenomena as occurred in the past causing either traffic interruption and damage to infrastructures insisting along the landslides fronts. (2) In the

  9. Study Area 1 (Mali) Report

    International Nuclear Information System (INIS)

    Mali is a landlocked country which covers 1,211,238 km2 and contains around 10 million people. Mali is cited among the less advanced countries with GDP of 156,264 CFA(220 US Dollars) per person. At least 75% of the population live in the rural areas and depend mainly on agriculture for their livelihood. The contribution of agriculture to GDP is about 50%. The population increase rate is 3.4% , while the GDP increase rate is about ----------. One of the major constraints to the integrated rural development in the portion of Malian territory (240,000 km2 or 16%) infested with tsetse flies is the presence of trypanosomosis. Mali is infested with only three types of tsetse flies: a regressing G.morsitans submorsitans in the declining savannah and the persisting G.palpalis gambiensis and G.tachinoides alongside the river systems. G.morsitans submorsitans, being continuously pushed by the cultivation of new lands, tsetse control in Mali is likely to be restricted to a battle against reverine tsetse flies. According to the criteria set up by PAAT, the cotton belt in the southern part of Mali which has a high potential for agricultural and livestock production, has been identified as a priority area for tsetse control. The development of this area is the responsibility of the 'Compagnie Malienne pour le Developpement des Textiles' known as CMDT. CMDT is a society owned by the Government of Mali (60%) and the 'Compagnie Francaise pour le Developpement des Textiles' known as CFDT (40%). Its primary mission was the promotion of the cotton business. Nowadays its activities have diversified and cover many other domains of socio-economic development such as food security, rural infrastructure (roads and bridges), public health, education, community organisation, etc. The present work is a contribution to a study examining the costs and the benefits of tsetse eradication and ensuing agricultural development for a small project (17,000 sq km) at the Mali - Burkina Faso border.

  10. Thermo-hydrologic modelling of permafrost with OpenFOAM®: perspectives of applications to the study of weathering in boreal areas

    Science.gov (United States)

    Laurent, Orgogozo; Oleg S., Pokrovsky; Yves, Goddéris; Christophe, Grenier; Jerome, Viers; David, Labat; Stephane, Audry; Anatoly, Prokushkin

    2015-04-01

    The weathering in permafrost dominated areas is strongly affected by the seasonnal freeze/thaw cycles of the active layers (e.g.: [1], [2]). Thus the expected evolution of the lengthes and of the intensities of these freeze/thaw cycles in response to the climate changes will lead to possibly strong interactions between climate changes and permafrost thermo-hydrological dynamics (e.g.: [3]), due for example to the link between the weathering processes and the climate [4]. The potential release to the atmosphere of organic carbon stored within the permafrosts may also be a strong source of feedbacks between the active layers dynamics and the global changes [5]. Consequently the study and the modelling of the thermo-hydrological behaviour of the active layers of permafrost dominated areas are important stakes for the improvement of our understanding of the continental surfaces dynamics under climate changes. In this work we will present a new numerical solver for the coupled water and thermal transfers within soils, developed in the framework of OpenFOAM® [6]. The use of OpenFOAM® allows using of parallel computing on 3D geometries in an easy way (e.g.: [7]). The goal that have motivated the development of this numercial tool is to be able to deal with the large space scales and time scales that are encountered for example in the study of the evolution of the weathering processes at the experimental watershed scale (e.g.: [8], [9]). After a brief presentation of the adopted theoritical description of the considered transfer phenomena (with Richards equation for the flow of water and an advection-diffusion-dispersion equation with phase change for the thermal transfer), we will show first results obtained in the framework of the benchmark INTERFROST ([10], [11]) and some preliminary results for an applicaion of the developped numerical tool to the study of the active layers in experimental watersheds of Central Siberia [12]. Finally the perspective of applications of

  11. Application of GIS and remote sensing for water resource management in Arid area – Wadi Dahab Basin – South Eastern Sinai-Egypt (Case-study)

    OpenAIRE

    Omran, Adel Fouad Abdou

    2013-01-01

    The present work is conducted to estimate the flood risks areas in W. Dahab and to design a suitable management system to control its huge runoff quantities. Hydrogeological and -chemical investigations are necessary in order to define the water pollution and manage the available water resources in the study area. Moreover, Maps indicating the natural water resources should be drawn to show the future review of these resources and setting of the suggested tools to manage water resources in th...

  12. APPLICATION OF LANDUSE CHANGE MODELING FOR PROTECTED AREA MONITORING

    OpenAIRE

    Jaafari, Shirkou; Shabani, Afshin Alizadeh; Danehkar, Afshin; Nazarisamani, Aliakbar

    2014-01-01

    Globally, land use change impacts biodiversity, water and radiation budgets, emission of green house gases, carbon cycling, and livelihoods. The study of LUCC and its dynamics is crucial for environmental management, especially with regard to sustainable agriculture and forestry. Different models, in terms of structure and application, have been used to understand LUCC dynamics. The present study aims to simulate the spatial pattern of land use change in Varjin protected area, Iran. Land cove...

  13. Fusion applications study: FAME

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.R.

    1986-01-01

    Fusion has a wide spectrum of applications that appear technically possible and may become economically feasible. Near-term (approx. 2000) application for production of nuclear fuels and useful radioisotopes is an economically attractive possibility as soon as fusion is ready. Electricity production will remain a prime, large-scale application of fusion. In the longer term, as fossil fuels dwindle, production of hydrogen could become a major application. Additional applications some of which have not even been conceived of yet, will add to this potential richness and diversity of fusion. It is the purpose of the fusion applications study - FMAE - to innovate, investigate, and evaluate these potential applications.

  14. Study Area 2 (Burkina Faso) Report

    International Nuclear Information System (INIS)

    This report provides data on the Study Area in Burkina Faso: Administration overview, provinces within the study area, human population profile by Department, structure of monetary income, soil suitability, vegetation, livestock profiles and distribution of tsetse species.

  15. Soviet and Post-Soviet Area Studies

    OpenAIRE

    Bonnell, Victoria E.; George W. Breslauer

    1998-01-01

    The essay traces the origins and development of Soviet area studies from their inception in the early 1940s to the present. The first part examines the institutional framework and the funding sources for Soviet and post-Soviet area studies. The second part concentrates on the connection between area studies and the disciplines. Next, the authors consider intellectual trends and map the major changes that have taken place in the conceptualization of Soviet area studies from the Second World Wa...

  16. Development of online Spatial Multi-Criteria Decision Analyst application: Case study on determining area suitability for school location in Surabaya, Indonesia

    Science.gov (United States)

    HaryPrasetyo, Daniel; Muhamad, Jamilah; Fauzi, Rosmadi

    2016-06-01

    A decision sometimes needs to consider many aspects and to be judged by many people. Presenting a case of finding a suitable location for a new school this research proposes seven factors which its emphasis will be differently sorted by various people perspective. Each factor comes in a form of a multi-polygon layer that valued from 0 to 9, representing the suitability value of the certain aspect in the whole city area. The Public and some expert will judge by using the pair-wise comparison of those aspects. This research will provide web GIS application that will use by the public and the expert in this justification process and analyzing the result.

  17. Designing application software in wide area network settings

    Science.gov (United States)

    Makpangou, Mesaac; Birman, Ken

    1990-01-01

    Progress in methodologies for developing robust local area network software has not been matched by similar results for wide area settings. The design of application software spanning multiple local area environments is examined. For important classes of applications, simple design techniques are presented that yield fault tolerant wide area programs. An implementation of these techniques as a set of tools for use within the ISIS system is described.

  18. Multi-robot formations for area coverage in space applications

    OpenAIRE

    Leitner, Jürgen

    2009-01-01

    This thesis presents two algorithmic implementations of multi-robot formation control for the area coverage problem. It uses a space exploration scenario, with a marsupial robot society, for tasks like mapping, habitat construction, etc. The solutions are though applicable to a wider range of applications, since area coverage is seen as one of the canonical problems in multi-robot application. Starting with an overview of multi-robot systems in space applications, both currently in use a...

  19. Application of Clinopyroxene Chemistry to Interpret the Physical Conditions of Ascending Magma, a Case Study of Eocene Volcanic Rocks in the Ghohrud Area (North of Isfahan

    Directory of Open Access Journals (Sweden)

    Mohammad Sayari

    2016-07-01

    Full Text Available Introduction Volcanic rocks with a porphyritic texture have experienced two crystallization stages. The first is slow, resulting in phenocrysts, and the second, which took place at, or near the surface, or during intrusion into a cooler body of rock, result in a groundmass of glass, or fine crystals. The pressure and temperature history of a magma during crystallization is recorded in the chemical composition of the phenocrysts during both stages. These phenocrysts provide valuable data about the physicochemical conditions of the parent magma during the process of crystallization. The composition of clinopyroxene (cpx reflects not only the chemical condition and therefore the magmatic series, but also the physical conditions, i.e., temperature and pressure of a magma at the time when clinopyroxene crystallized. The Ghohrud area lies in the middle part of the Urumieh-Dokhtar Magmatic Arc , which is part of a much larger magmatic province extending in a vast region of convergence between Arabia and Eurasia north of the Zagros-Bitlis suture zone (Dilek et al., 2010. In the Ghohrud area, north of Isfahan, exposed Eocene volcanic rocks belong to the first pulse of Cenozoic volcanism of Iran (Sayari, 2015, ranging in composition from andesitic basalt to basalt. The basaltic rocks of the Ghohrud area are composed mainly of plagioclase phenocrysts surrounded by smaller crystals of clinopyroxene in a groundmass of microlites, glass and opaques. In this study, the clinopyroxene and plagioclase of these rocks were analyzed in order to estimate the physicochemical conditions of the parent magmas. Results Clinopyroxene and plagioclase phenocrysts of nineteen samples were analyzed with the electron microprobe. The chemical compositions of the clinopyroxenes were used to estimate both the chemical evolution and temperature and pressure conditions of the magmas during crystallization, using SCG, a specialized software for clinopyroxene thermobarometry (Sayari

  20. The possibility of application of Sørensen and Renkonen indexes in the study of winter avifauna in small plots of the urban green areas

    OpenAIRE

    Brauze, Tomasz; Zieliński, Jacek

    2008-01-01

    Quantitative studies of winter avifauna (1999/2000) were conducted in three fragments of urban green areas in central Poland. Two observers independently controlled three plots six times, doing two subsequent counts (10 ha/1.5 hour) on the same day. All visits that were carried out in the same plot by the same observer during the same time of day were defined as a "survey". Differences between maximum and minimum values of similarity in species composition (Sørensen index - QS) and dominance ...

  1. Elemental compositions of sediments at Haiphong harbour area as determined by nuclear analytical techniques application in sediment transport studies and conservation of the environment

    International Nuclear Information System (INIS)

    Nuclear analytical techniques were applied to determine the elemental compositions of suspended and bottom sediments, collected at different sites in Haiphong harbor area (North Viet nam). The study was aimed at: 1/Understanding the origin of the sediment filling up the access channel and causing large expenditures for dredging operations. 2/Determining the background concentrations of trace elements in sediment. This would allow to detect in the future any pollution caused by the discharge of industrial wastes in the water due to the growing industrialization of the area. 3/Identifying the elements, which can be served as activatable tracers in sediment transport studies. The results obtained for the concentrations of nearly 30 elements show rather similar elemental compositions, reflecting a common origin of the sediments taken from different locations in the harbour area. The results could not allow to identify the pathway of the sediment transported to and deposited on the bottom of the access channel. Meanwhile, a considerable difference was found in the elemental compositions of the sediment and the soil taken at the nearby to the channel island bank. This would definitely exclude any hypothesis on the interrelationship between the sediment on the bottom of the channel with the soil abraded from the island. Among the tracer elements with concentrations in sediment at the ppm level, indium and selenium have been selected as the most suitable activatable tracers. Experiments on tracer preparation are in progress and some preliminary results have been obtained. The analysis also provides the background levels of the elements-pollutants, on the basis of which any industrial pollution in the future could be revealed.(Authors)(1 Table)

  2. Body Area Network Standardization, Analysis and Application

    OpenAIRE

    Asare, Diamond

    2014-01-01

    WBAN (Wireless Body Area Network) on sisätiloissa tai ihmiskehon välittömässä läheisyydessä käytettävä lyhyen kantaman langaton tiedonsiirtotapa. Se soveltuu sekä lääketieteellisiin että ei-lääketieteellisiin sovelluksiin. Yleisimmin sitä käytetään lääketieteessä potilaan reaaliaikaisessa diagnosoinnissa. Olemassa olevat lyhyen kantaman tiedonsiirtoteknologiat, kuten Bluetooth, Bluetooth Low Energy (BLE), ZigBee ja Wi-Fi olisivat olleet soveltuvia teknologioita WBAN:lle. Ne ovat k...

  3. Application of fluorimetry in nuclear area

    International Nuclear Information System (INIS)

    Uranium is the main element in nuclear cycle. It's a very important commercial product and very toxic, too. It is necessary to control its concentration in environmental, materials and man. The CDTN, (Nuclear Technology Development Institute, Brazilian (CNEN) has been applied the fluorimetry technique for 20 years determining uranium in several matrices like water, solid and liquid waste, ores, sediments, alloys, urine and biomaterials. This paper is about the application of the fluorimetry technique, the advantages and disadvantages, the chemical procedures alongside of programmes to insure the quality of results. The detection limit is of 10-10 g. (author). 4 refs., 2 tabs

  4. Model-Driven Approach for Body Area Network Application Development

    Directory of Open Access Journals (Sweden)

    Algimantas Venčkauskas

    2016-05-01

    Full Text Available This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS. We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application.

  5. Model-Driven Approach for Body Area Network Application Development.

    Science.gov (United States)

    Venčkauskas, Algimantas; Štuikys, Vytautas; Jusas, Nerijus; Burbaitė, Renata

    2016-01-01

    This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN) applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level) and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS)). We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD) variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD)) and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor) is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application. PMID:27187394

  6. Model-Driven Approach for Body Area Network Application Development

    Science.gov (United States)

    Venčkauskas, Algimantas; Štuikys, Vytautas; Jusas, Nerijus; Burbaitė, Renata

    2016-01-01

    This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN) applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level) and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS)). We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD) variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD)) and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor) is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application. PMID:27187394

  7. Application of isotope for studying the origin of groundwater recharge and salinity in the Rasafeh area (Middle Euphrates Basin - the Sham Bank)

    International Nuclear Information System (INIS)

    Using the environmental isotopes technique, it was possible to determine the recharge of groundwater resources and establish the relation of Euphrates river with these resources in quarternary. Paleoquarternary and neogene aquifers in the Rasafeh area of the middle Euphrates basin (Sham Bank). The results of the isotopic mixing model and netpath mixing model show that Euphrates River contribution in the recharge of the groundwater reached 70% on the average compared to 30% of infiltrated rain water. With general trend indicating the contribution of Euphrates river in Tortonian and Helvetian aquifers is higher than its contribution in paleoquarternary aquifer. Overall groundwater contains tritium, The map of tritium distribution shows the distinct zonation of groundwater circulation, which is associated with Rasafeh fault system. The main residence time is very short and correlated with high radioactivity of C14 confirming that the groundwater returns to recent age. In conclusion, study of salinity scenario reveal that dissolution is the main factor of high salinity, and salinity amount is basically related to SC4 from gypsum dissolution. The interpretation of this phenomena is strongly consider the influence of severe pumping in the area leading to the formation of local depression pumping which in turn, increases the flowpaths of river and dam Euphrates waters. (author)

  8. Intelligent computing systems emerging application areas

    CERN Document Server

    Virvou, Maria; Jain, Lakhmi

    2016-01-01

    This book at hand explores emerging scientific and technological areas in which Intelligent Computing Systems provide efficient solutions and, thus, may play a role in the years to come. It demonstrates how Intelligent Computing Systems make use of computational methodologies that mimic nature-inspired processes to address real world problems of high complexity for which exact mathematical solutions, based on physical and statistical modelling, are intractable. Common intelligent computational methodologies are presented including artificial neural networks, evolutionary computation, genetic algorithms, artificial immune systems, fuzzy logic, swarm intelligence, artificial life, virtual worlds and hybrid methodologies based on combinations of the previous. The book will be useful to researchers, practitioners and graduate students dealing with mathematically-intractable problems. It is intended for both the expert/researcher in the field of Intelligent Computing Systems, as well as for the general reader in t...

  9. System studies and applications

    International Nuclear Information System (INIS)

    Extensive information is given for each of the following topics: (1) fusion reactor studies, (2) reactor concepts, (3) first wall studies, (4) laser system studies, (5) fusion-fission hybrids, (6) National security applications, and (7) long-range planning for inertial confinement fusion

  10. The application of cyclodextrins in textile area

    Directory of Open Access Journals (Sweden)

    Đorđević Dragan

    2006-01-01

    Full Text Available The application of Cyclodextrins for textiles was reviewed in this paper. Cyclodextrins are crystalline, water soluble, cyclic, non-reducing oligosaccharides consisting of six, seven, or eight glucopyranose units. Cyclodextrins are known as products which are able to form inclusion complexes. The ability of Cyclodextrins to form inclusion complexes can be used, e.g., to remove malodor from textile materials, etc. Furthermore, some modifications of the parent Cyclodextrins are possible. The derivatives can be reactive (e.g. cyclodextrin with a monochlorotriazinyl group, more hydrophilic (by means of hydrophilic side groups, such as hydroxypropyl and hydroxyethyl, less hydrophilic (by means of lipophilic side groups, such as ethylhexyl glycidyl or ionic (by means of ionic side groups, such as hydroxypropyl trimethyl ammonium chloride.The methods for treating textiles are thus quite simple. The method using anchor-bearing Cyclodextrins is especially useful, since no fixation agent is needed, enabling they use of conventional textile treatment techniques and equipment. Furthermore, this method has virtually no limitations with respect to the textile materials that can be used.

  11. Overview of the LCG applications area software projects

    CERN Document Server

    Pfeiffer, Andreas

    2004-01-01

    The Applications Area of the LHC Computing Grid Project (LCG) develops part of the physics applications software and associated infrastructure that can be shared among the LHC experiments. The scope includes common applications software infrastructure, frameworks, libraries and tools, together with domain specific components such as simulation and analysis toolkits. The work of the applications area is conducted within a number of projects: software process and infrastructure (SPI), persistency framework (POOL), core libraries and services (SEAL), physicist interface (PI), and simulation (SIMU). ROOT, which is a general purpose object oriented framework that implements software for managing object persistency and for supporting interactive data analysis and visualization, is also used to implement vital parts of Applications Area software. The project has been in an active development phase for more than 2 years and is being integrated by the experiments in their frameworks on which they base the applications...

  12. The cooperation of the functional activation areas in human brain: an application of event-related fMRI study of the voluntary motor function

    International Nuclear Information System (INIS)

    Objective: To detect the cooperation of the functional activation areas in human brain using event-related fMRI technique developed in recent years. Methods: Forty-four subjects were selected in this experiment and scanned by GE Signa Horizon 1.5 Tesla superconductive MR system. A CUE-GO paradigm was used in this experiment. The data were analyzed in SUN and SGI workstation. Results: The activation areas were found in contralateral primary motor area (Ml), bilateral supplementary motor areas (SMA), pre-motor areas (PMA), basal ganglia, and cerebellar cortices. The time-signal curve of Ml was a typical single-peak curve, but the curves in PMA, basal ganglia, and cerebellar cortices were double-peak curves. SMA had 2 parts, one was Pre-SMA, and another was SMA Proper. The curve was double-peak type in Pre-SMA and single-peak type in SMA Proper. There was difference between the time-signal intensity curves in above-mentioned areas. Conclusion: (1) Ml is mainly associated with motor execution, while others with both motor preparation and execution. There are differences in the function at the variant areas in the brain. (2) The fact that bilateral SMA, PMA, basal ganglia, and cerebellar cortices were activated, is different from what the classical theories told. (3) Event-related fMRI technique has higher temporary and spatial resolutions. (4) There is cooperation among different cortical areas, basal ganglia, and cerebellum

  13. 75 FR 54542 - Special Areas; Roadless Area Conservation; Applicability to the National Forests in Idaho...

    Science.gov (United States)

    2010-09-08

    ... Forest Service 36 CFR Part 294 Special Areas; Roadless Area Conservation; Applicability to the National Forests in Idaho; Proposed Correction AGENCY: Forest Service, USDA. ACTION: Proposed administrative... Register October 16, 2008 (73 FR 61456) and associated maps. These corrections were discussed with...

  14. Bureau of Land Management Wilderness Study Areas

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This dataset is meant to depict Wilderness Study Areas (WSA's), within the state of New Mexico, identified by the U.S. Bureau of Land Management (BLM) as having...

  15. Area Studies and the Traditional Disciplines

    Science.gov (United States)

    Grieb, Kenneth J.

    1974-01-01

    The function of area studies in the university and its relationship to the traditional department is examined with consideration to the solution of short-range problems and to the long-range advantages of each type of organization. (Author)

  16. Energy Efficiency in Industrial Areas: Application of Best Practices for Energy Efficiency In Mediterranean Industrial Areas

    Directory of Open Access Journals (Sweden)

    Maria-Anna Segreto

    2013-04-01

    Full Text Available The results presented in this paper originate from an EU research project that is near toits completion. The goal was to build a model that can be applied to all industrial sites inthe Mediterranean area. The approach followed to achieve the objectives was to study allthe new technologies and systems that, if applied globally, can make the whole areasustainable both energetically and environmentally. The application of the model allowsthe design and implementation of self-sufficient green areas in terms of energy which alsobrings to the reduction of the emissions into the atmosphere. An aim of the project wasalso to identify possible sources of funding or incentives. The main beneficiaries of theresults are SMEs that through a more responsible approach to the environment could getgreater market competitiveness and reduce energy costs of their enterprises. Otherbeneficiaries are the people who obtain advantages from a clearer and less pollutedsurrounding environment.The paper presents the results obtained from the application of the model in some pilotcases.

  17. The application of remote sensing in the environmental risk monitoring of tailings pond: a case study in Zhangjiakou area of China

    Science.gov (United States)

    Xiao, Rulin; Shen, Wenming; Fu, Zhuo; Shi, Yuanli; Xiong, Wencheng; Cao, Fei

    2012-10-01

    As a kind of huge environmental risk source, tailings pond could cause a huge environmental disaster to the downstream area once an accident happened on it. Therefore it has become one key target of the environmental regulation in china. Especially, recently environmental emergencies caused by tailings pond are growing rapidly in China, the environmental emergency management of the tailings pond has been confronting with a severe situation. However, the regulatory agency is badly weak in the environmental regulation of tailings pond, due to the using of ground surveys and statistics which is costly, laborious and time consuming, and the lacking of strong technical and information support. Therefore, in this paper, according to the actual needs of the environmental emergency management of tailings pond, we firstly make a brief analysis of the characteristics of the tailings pond and the advantages and capability of remote sensing technology, and then proposed a comprehensive and systematic indexes system and the method of environmental risk monitoring of tailings pond based on remote sensing and GIS. The indexes system not only considers factors from the upstream area, the pond area and the downstream area in a perspective of the risk space theory, but also considers factors from risk source, risk receptor and risk control mechanism in a perspective of risk systems theory. Given that Zhangjiakou city has up to 580 tailings pond and is nearly located upstream of the water source of Beijing, so finally we apply the proposed indexes system and method in Zhangjiakou area in China to help collect environmental risk data of tailings pond in that area and find out it works well. Through the use case in Zhajiakou, the technique of using remote sensing to monitor environmental risk of tailings pond is feasible and effective, and would contribute to the establishment of `Space-Ground' monitoring network of tailings pond in future.

  18. A Study of the Work of Daniel Starch: A Chapter in the History of the Application of Psychology and Statistics to Education and Other Areas.

    Science.gov (United States)

    Johanningmeier, Erwin V.

    This document examines the work of Daniel Starch, emphasizing his work in educational psychology and advertising. After earning his doctorate in psychology (1906), Starch attempted to apply the findings of the new science to education and to advertising. This application met with much success. In advertising, he devised new sampling techniques and…

  19. 300 Area TEDF DOE order compliance applicability assessment

    International Nuclear Information System (INIS)

    This report summarizes the results of an effort to determine applicability of Department of Energy Orders at the Hanford 300 Area Treated Effluent Disposal Facility (TEDF). This assessment placed each of the reviewed orders into one of three compliance categories: (A) order applicable at a facility specific level (20 identified); (B) order applicable at a policy level (11 identified); or (C) order not applicable (21 identified). The scope of the assessment from the DOE Order standpoint was the 52 Level 1 Orders of interest to the Defense Nuclear Facility Safety Board (DNFSB). Although the TEDF is a non-nuclear facility, this order basis was chosen as a Best Management Practice to be consistent with ongoing efforts across the Hanford Site. Three tables in the report summarize the DOE order applicability by the compliance categories, with a table for Level A, Level B, and Level C applicability. The attachment to the report documents the compliance applicability assessment for each individual DOE Order

  20. Economics, Area Studies and Human Development

    OpenAIRE

    Ranis, Gustav

    2009-01-01

    This paper suggests that area studies and economics have a better chance to be married successfully if we shift our attention from the exclusive emphasis on economic growth towards improvements in human development, especially the much broadened version of that concept. Different areas are shown to differ substantially in terms of the choices they make among the various independent dimensions of well-being and the various indicators within each dimension. The particular characteristics of eac...

  1. BUFFALO PEAKS WILDERNESS STUDY AREA, COLORADO.

    Science.gov (United States)

    Hedlund, D.C.; Wood, R.H.

    1984-01-01

    Field investigations were conducted to evaluate the mineral-resource potential of the Buffalo Peaks Wilderness Study Area, Colorado. On the basis of this study there is a probable mineral-resource potential for silver vein and bedding replacement deposits along the Weston Pass fault zone, for hydrothermal vein-type uranium deposits in the vicinity of the Parkdale iron pit, and for gold vein deposits in the parts of the Granite and Four Mile districts that are within the wilderness study area. A probable barite resource potential occurs at Rough and Tumbling Creek and near Spring Creek on the east side of the study area. There is little promise for the occurrence of energy resources.

  2. A Preliminary Study of the Application of Electromagnetic Conductivity Meter on Soil Properties of Paddy Cultivation Areas at Wue Village, Jantho, Aceh Besar District, Indonesia

    OpenAIRE

    Marwan .

    2015-01-01

    Conventional soil sampling is time consuming and requires meticulous laboratory analysis. Hence, mapping of soil apparent in respect to electrical conductivity (ECa) has been developed to identify areas of contrasting soil properties. Such ECa values are represent measures of soil properties. The sensor system, GF Instrument model CMD-4 were used to analyze soil physical properties. This system consists of three important parts, ECa sensor, data logger and Global Positioning System (DGPS) rec...

  3. Application of GIS based on evidence weighting method to the evaluation of uranium metallogenic target areas: a case study of Bayingebi Basin in inner mongolia

    International Nuclear Information System (INIS)

    Former data and information in geology, geophysics, geochemistry and remote sensing of Bayingebi Basin are processed and analyzed. Fifteen information layers such as uranium of geochemical survey, uranium of airborne radioactive survey and hydroxy anomaly of remote sensing are selected to assess and evaluate the uranium mineralization potential by the method of evidence weighting based on GIS. The potential areas are classified and 11 prospecting targets are delineated. (authors)

  4. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  5. Review of Multimodal Biometrics: Applications, challenges and Research Areas

    Directory of Open Access Journals (Sweden)

    Prof. Vijay M. Mane

    2009-11-01

    Full Text Available Biometric systems for today’s high security applications must meet stringent performance requirements. The fusion of multiple biometrics helps to minimize the system error rates. Fusion methods include processing biometric modalities sequentially until an acceptable match is obtained. More sophisticated methods combine scores from separate classifiers for each modality. This paper is an overview of multimodal biometrics, challenges in the progress of multimodal biometrics, the main research areas and its applications to develop the security system for high security areas

  6. Wireless Body Area Networks for Healthcare Applications: Protocol Stack Review

    OpenAIRE

    Luis Filipe; Florentino Fdez-Riverola; Nuno Costa; António Pereira

    2015-01-01

    Wireless Body Area Networks (WBANs) supporting healthcare applications are in early development stage but offer valuable contributions at monitoring, diagnostic, or therapeutic levels. They cover real-time medical information gathering obtained from different sensors with secure data communication and low power consumption. As a consequence of the increasing interest in the application of this type of networks, several articles dealing with different aspects of such systems have been publishe...

  7. Idaho Batholith Study Area Density Grid

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 2 kilometer terrace-density grid for the Idaho batholith study area. Number of columns is 331 and number of rows is 285. The order of the data is from the lower...

  8. Idaho Batholith Study Area Isostatic Gravity Grid

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 2 kilometer isostatic gravity grid for the Idaho batholith study area. Number of columns is 331 and number of rows is 285. The order of the data is from the lower...

  9. Belledune area health study : summary report

    International Nuclear Information System (INIS)

    The Belledune area has been home to various industrial activities such as mining, smelting, fertilizer plants, battery-recycling plants, gypsum plants, sawmills, and a coal-fired electricity generating facility. These industries have had various types and quantities of emissions over the past 4 decades that may have impacted on the health of people in the area. This report provided details of the Belledune Health Area Study. The objective of the study was to ensure that the concerns of residents were addressed and that the historical and human health risks associated with past and current industrial activities were quantified. The current health status of residents in the area was examined with reference to environmental exposures, and recommendations for future studies and research based on the results of the study were presented. Two main components were used: the human health risk assessment (HHRA), and community health status assessment (CHSA). Best estimate calculations for residents in the core communities showed that exposures to cadmium, lead and mercury were predicted to be below toxicity reference values. In Belledune itself, child exposures to cadmium and mercury were above the toxicity reference value. Results indicated that the health status pattern for the study area was different from that found in the surrounding areas. There was a statistically significantly elevated incidence of oral, respiratory, and prostate cancer and elevated incidences of kidney and colorectal cancer. There was a higher mortality rate than expected, and there were more deaths than expected due to circulatory disease, cancer and other causes such as accidents and suicides. An expanded survey of blood lead among child residents and pregnant women was recommended. A program was launched to collect data on metal concentrations in fish from the Baie des Chaleurs and additional data on vegetables from the Greater Belledune area. Future research on some of the factors associated

  10. Belledune area health study : summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-01

    The Belledune area has been home to various industrial activities such as mining, smelting, fertilizer plants, battery-recycling plants, gypsum plants, sawmills, and a coal-fired electricity generating facility. These industries have had various types and quantities of emissions over the past 4 decades that may have impacted on the health of people in the area. This report provided details of the Belledune Health Area Study. The objective of the study was to ensure that the concerns of residents were addressed and that the historical and human health risks associated with past and current industrial activities were quantified. The current health status of residents in the area was examined with reference to environmental exposures, and recommendations for future studies and research based on the results of the study were presented. Two main components were used: the human health risk assessment (HHRA), and community health status assessment (CHSA). Best estimate calculations for residents in the core communities showed that exposures to cadmium, lead and mercury were predicted to be below toxicity reference values. In Belledune itself, child exposures to cadmium and mercury were above the toxicity reference value. Results indicated that the health status pattern for the study area was different from that found in the surrounding areas. There was a statistically significantly elevated incidence of oral, respiratory, and prostate cancer and elevated incidences of kidney and colorectal cancer. There was a higher mortality rate than expected, and there were more deaths than expected due to circulatory disease, cancer and other causes such as accidents and suicides. An expanded survey of blood lead among child residents and pregnant women was recommended. A program was launched to collect data on metal concentrations in fish from the Baie des Chaleurs and additional data on vegetables from the Greater Belledune area. Future research on some of the factors associated

  11. Radioecological studies in Goiania urban area: review

    International Nuclear Information System (INIS)

    Studies on the behaviour and transport of 137 Cs in urban areas, including, resuspension and deposition experiments, 137 Cs uptake by leafy vegetables and small domestic animals that accidentally ingested contaminated soil, were performed in a house located at 57th Street near the main focus of contamination. The resuspension of surface soil did not contribute much to the spreading of the radionuclide in Goiania, but can lead to the local contamination of vegetables, equipment, structures and other environmental surfaces. The mechanism also presented a seasonal effect. The soil is an important medium for the uptake of 137 Cs by small domestic animals. The street dust sampling is a suitable method to assess the dispersion of 137 Cs in urban areas. After 10 years, the radionuclide activity concentration is restricted only to the initially impacted area an it is decreasing with time. (author)

  12. Hydrogeologic study of Cafam area. Melgar (Tolima)

    International Nuclear Information System (INIS)

    The hydrogeologic study covers an area of 50 km2 with the objectives of to determine the possibility of use of the underground waters and to locate places to carry out exploratory perforations in lands of Cafam, equally the elaboration of a hydrogeologic map of the region; for the effect it was carried out cartography geologic scale 1:10.000, inventory and sampling of water point, geoelectric prospecting and some permeability tests. In the area the exploitation of underground water is incipient, alone there are 20 points of water, of which none produce more than 1L/seg. The water has in general good physical chemistry quality for the human consumption. Geologically was recognized the groups Guadalupe and Gualanday, also some quaternary deposits; the previous ones were subdivided in 11 geological units for its composition and morphology, which are framed structurally in the E flank of the synclinal of Carmen de Apicala and displaced by traverse faults with address E-W and N-W. From the point of hydrogeologic view the units were grouped in 8 aquifer systems, of which four are considered of hydrogeologic importance for the area; the sector with better possibilities to capture these aquifer systems is the W of the area (in the terraces area) that extends to the Sumapaz River. For the Cafam sector a place was selected to build an exploratory well of 200 mts. of depth that would capture an aquifer of low transmissivity, corresponding to the Unit T3

  13. Semiworks source aggregate area management study report

    International Nuclear Information System (INIS)

    This report presents the results of an aggregate area management study (AAMS) for the Semi-Works Aggregate Area in the 200 Areas of the US Department of Energy (DOE) . Hanford Site in Washington State. This scoping level study provides the basis for initiating Remedial Investigation/Feasibility Study (RI/FS) activities under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) or Resource Conservation and Recovery Act (RCRA) Facility Investigations WD and Corrective Measures Studies (CMS) under RCRA. This report also integrates select RCRA treatment storage, or disposal (TSD) closure activities with CERCLA and RCRA past-practice investigations. This approach is described and justified in The Hanford Federal Facility Agreement and Consent Order Change Package. This strategy provides new concepts for: accelerating decision-malting by maximizing the use of existing data consistent with data quality objectives (DQOs); and undertaking expedited response actions (ERAS) and/or interim remedial measures (IRMs), as appropriate, to either remove threats to human health and welfare and the environment, or to reduce risk by reducing toxicity, mobility, or volume of contaminants

  14. Toward better application of minimum area requirements in conservation planning

    NARCIS (Netherlands)

    Pe’er, G.; Tsianou, M.A.; Franz, K.W.; Matsinos, Y.G.; Mazaris, A.D.; Storch, D.; Kopsova, L.; Verboom, J.; Baguette, M.; Stevens, V.M.; Henle, K.

    2014-01-01

    The Minimum Area Requirements (MAR) of species is a concept that explicitly addresses area and therefore can be highly relevant for conservation planning and policy. This study compiled a comprehensive database of MAR estimates from the literature, covering 216 terrestrial animal species from 80 stu

  15. Caribbean area food irradiation feasibility study

    International Nuclear Information System (INIS)

    The US Agency for International Development funded the Caribbean Area Food Irradiation Feasibility Study (CAFI) through the US National Food Processors Association and with the collaboration of the US Department of Energy. This study focused on the economic, technical, financial, political and social feasibility of transferring food irradiation technology to the Caribbean area. The study focuses on three areas including the benefits to small farmers and nations interested in the export of crops, including non-traditional tropical commodities. The Feasibility Study Team conducted field work in Guatemala, Haiti, and Trinidad. The benefits of irradiation technology have been shown to have an impact particularly on the small farmer who is more capable of producing non-traditional crops intended for international export marketing. In Haiti, the anthropologists working on the CAFI study found that 74,000 individuals will be directly affected by the ban on the postharvest fumigant ethylene dibromide. Irradiation technology can not only provide the quarantine security needed to allow crops requiring quarantine treatment to move into international trade, but it can promote international co-operation in technology transfer. Training and safety issues related to the transfer, operation, and disposal of nuclear materials must be considered and point out the need for adequate regional co-operative programmes. Research and training programmes will be needed to augment the implementation of food irradiation processing by the private sector. Irradiation firms planning facilities in developing countries may need to provide crop production information, international marketing intelligence, and other assistance needed to integrate an irradiator into the overall postharvest food system. (author)

  16. A Review of Wireless Body Area Networks for Medical Applications

    OpenAIRE

    2010-01-01

    Recent advances in Micro-Electro-Mechanical Systems (MEMS) technology, integrated circuits, and wireless communication have allowed the realization of Wireless Body Area Networks (WBANs). WBANs promise unobtrusive ambulatory health monitoring for a long period of time and provide real-time updates of the patient's status to the physician. They are widely used for ubiquitous healthcare, entertainment, and military applications. This paper reviews the key aspects of WBANs for numerous applicati...

  17. Safety study application guide

    International Nuclear Information System (INIS)

    Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Included are analyses of existing facilities done under the aegis of the Safety Analysis Report Upgrade Program, and analyses of new and modified facilities. A graded approach is used wherein the level of analysis and documentation for each facility is commensurate with the magnitude of the hazard(s), the complexity of the facility and the stage of the facility life cycle. Safety analysis reports (SARs) for hazard Category 1 and 2 facilities are usually detailed and extensive because these categories are associated with public health and safety risk. SARs for Category 3 are normally much less extensive because the risk to public health and safety is slight. At Energy Systems, safety studies are the name given to SARs for Category 3 (formerly open-quotes lowclose quotes) facilities. Safety studies are the appropriate instrument when on-site risks are limited to irreversible consequences to a few people, and off-site consequences are limited to reversible consequences to a few people. This application guide provides detailed instructions for performing safety studies that meet the requirements of DOE Orders 5480.22, open-quotes Technical Safety Requirements,close quotes and 5480.23, open-quotes Nuclear Safety Analysis Reports.close quotes A seven-chapter format has been adopted for safety studies. This format allows for discussion of all the items required by DOE Order 5480.23 and for the discussions to be readily traceable to the listing in the order. The chapter titles are: (1) Introduction and Summary, (2) Site, (3) Facility Description, (4) Safety Basis, (5) Hazardous Material Management, (6) Management, Organization, and Institutional Safety Provisions, and (7) Accident Analysis

  18. Preliminary studies on the optimization of countermeasures for agricultural areas

    Energy Technology Data Exchange (ETDEWEB)

    Rochedo, Elaine R.R.; Igreja, Eduardo; Barboza, Adriana E., E-mail: elainerochedo@gmail.com, E-mail: eduigreja@gmail.com, E-mail: adrianaebarboza@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Silva, Diogo N.G. da; Guimaraes, Jean R.D., E-mail: diogons@gmail.com, E-mail: jeanrdg@biof.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Instituto de Biofisica Carlos Chagas Filho; Wasserman, Maria Angelica V., E-mail: mwasserman@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Perez, Daniel V. [Centro Nacional de Pesquisa de Solos (EMBRAPA), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    The assessment of remediation measures for rural areas is more complex than that for urban ones, due to the influence of large number of variables associated with climate, diet, farming practices and the type of soil. Thus, it is not possible to perform generic studies applicable to all types of area. Specific studies and surveys should be made in the areas most likely to contamination from a nuclear accident. Preliminary studies demonstrated that the different soil types in Brazil is more relevant to the ingestion dose than the regional differences in diets. Other studies have described the prioritization of areas and products for detailed survey on soil types and remediation procedures, for an accident at the NPP in Angra dos Reis, based on radiological and economic aspects. The most relevant product was milk, due to both its relevance to the intake and the loss of income for the counties. The contribution of milk to dose depends on the season of the year when the accident occurs, mainly due to the relative contribution of other items of the diet. The timing of the application of the countermeasure has an important effect on the dose reduction that can be achieved. For I-131, protective measures must be considered within the emergency phase in order to be effective. The main action on reducing ingestion doses is the removal of food items from diet, while providing clean food to the population. (author)

  19. Preliminary studies on the optimization of countermeasures for agricultural areas

    International Nuclear Information System (INIS)

    The assessment of remediation measures for rural areas is more complex than that for urban ones, due to the influence of large number of variables associated with climate, diet, farming practices and the type of soil. Thus, it is not possible to perform generic studies applicable to all types of area. Specific studies and surveys should be made in the areas most likely to contamination from a nuclear accident. Preliminary studies demonstrated that the different soil types in Brazil is more relevant to the ingestion dose than the regional differences in diets. Other studies have described the prioritization of areas and products for detailed survey on soil types and remediation procedures, for an accident at the NPP in Angra dos Reis, based on radiological and economic aspects. The most relevant product was milk, due to both its relevance to the intake and the loss of income for the counties. The contribution of milk to dose depends on the season of the year when the accident occurs, mainly due to the relative contribution of other items of the diet. The timing of the application of the countermeasure has an important effect on the dose reduction that can be achieved. For I-131, protective measures must be considered within the emergency phase in order to be effective. The main action on reducing ingestion doses is the removal of food items from diet, while providing clean food to the population. (author)

  20. A Review of Wireless Body Area Networks for Medical Applications

    CERN Document Server

    Ullah, Sana; Ullah, Niamat; Saleem, Shahnaz; Higgins, Henry; Kwak, Kyung Sup; 10.4236/ijcns.2009.28093

    2010-01-01

    Recent advances in Micro-Electro-Mechanical Systems (MEMS) technology, integrated circuits, and wire-less communication have allowed the realization of Wireless Body Area Networks (WBANs). WBANs promise unobtrusive ambulatory health monitoring for a long period of time, and provide real-time updates of the patients status to the physician. They are widely used for ubiquitous healthcare, entertainment, and military applications. This paper reviews the key aspects of WBANs for numerous applications. We present a WBAN infrastructure that provides solutions to on-demand, emergency, and normal traffic. We further discuss in-body antenna design and low-power MAC protocol for a WBAN. In addition, we briefly outline some of the WBAN applications with examples. Our discussion realizes a need for new power-efficient solutions towards in-body and on-body sensor networks.

  1. Environment studies in the Olkiluoto area

    International Nuclear Information System (INIS)

    In the report, different aspects of environmental status of the Olkiluoto area, an island with the near-sea in the Finnish coast of the Baltic Sea, are described by five topical papers. Regarding animal-life, Olkiluoto represents a typical seashore area of southwestern Finland dominated by rocky hills and commercial forests. In the literature and interview study of local hunters, locally dominant mammal and bird species are identified. No threatened or endangered mammals species were found on the island, and only few bird species in Olkiluoto have a high conservation value. The sea area off Olkiluoto is rather shallow and the water mixing conditions are favourable. The quality and biological production of the water are affected by the general state of the Bothian Sea, the loading brought by the Eurajoki and Lapinjoki Rivers and local wastewaters. Also the cooling waters from the local nuclear power plant impact the sea environment. The bottom vegetation varies from an algae-dominant to a vascular-plantdominant community. Amount of benthic fauna and its species composition has varied considerably, due to both variations of the quality of the bottom and eutrophication. The Eurajoki River represents the second largest river system in southwestern Finland. At its upper reaches, the river is classified as clean and suitable for recreational use. Intermittently, additional waters rich in nutrients flow into the river from ditches and tributaries. Diffuse pollution and the wastewaters of riverside municipalities and industry affect on the water of the lower course, where it is only mildly contaminated, hygienically fairly good and satisfactory for recreational use. The benthic fauna of the river is composed of oligochaetes, clams, leeches and larvae. The fish reserve is versatile in places due to stocking. The Eurajoensalmi Strait, the inlet of the river, is a transitional zone between the river and further sea environments. In the offshore area facing Olkiluoto, there

  2. Epidemiological studies in high background radiation areas

    International Nuclear Information System (INIS)

    Below the doses of 100-200 mSv of radiation exposure, no acute health effect is observed, and the late health effects such as cancer are yet unclear. The problems making the risk evaluation of low dose radiation exposure difficult are the fact that the magnitude of expected health effects are small even if the risk is assumed to increase in proportion to radiation doses. As a result, studies need to be large particular when dealing with rare disease such as cancer. In addition, the expected health effects are so small that they can easily be masked by lifestyles and environmental factors including smoking. This paper will discuss cancer risk possibly associated with low-dose and low-dose rate radiation exposure, describing epidemiological studies on the residents in the high-background radiation areas. (author)

  3. Chesapeake Resources Ltd. application for a well licence, Whitemud area

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-04

    An application was made for a license to drill an oil or gas well in a populated area near Edmonton, Alberta. A public hearing was held to examine issues related to the well application. Issues considered at the hearing were the need for the well, the effects of drilling the well on the neighboring residences, and the impact of drilling on a nearby alpaca ranch. The need for the well was confirmed, as there is no other existing well in the section capable of draining any reserves that may be in the targeted formation. The effects of drilling on the residences, such as noise and spills, were considered to be capable of being reduced to acceptable levels. Discussion of the impact of drilling on the alpacas focused on noise pollution. It was concluded that the relatively short duration of drilling, and the commitments made by the applicant to minimize noise levels, mean that these impacts would not be significant. The application was accordingly approved, with certain conditions imposed on the applicant to control noise and other impacts. 1 fig.

  4. Application of vehicular communications for improving the efficiency of traffic in Urban areas

    OpenAIRE

    Katsaros K.; Kernchen R.; Dianati M.; Rieck D.; Zinoviou C.

    2011-01-01

    This paper studies the impacts of vehicular communications on efficiency of traffic in urban areas. We consider a Green Light Optimized Speed Advisory application implementation in a typical reference area and present the results of its performance analysis using an integrated cooperative intelligent transportation systems simulation platform. In addition, we study route alternation using vehicle-to-infrastructure and vehicle-to-vehicle communications. Our interest was to monitor the impacts ...

  5. Isotope hydrology studies of water resources (Tabas area case study)

    International Nuclear Information System (INIS)

    Tabas Town with a surface area of 55,000 km2 is located in north-east of Yazd City in the east of Iran. It is situated in western slopes of eastern heights of the country, on sediments of fourth era, on the edge of Kavir-e-Namak Desert. The study area falls between 56 deg. to 57 deg. 45' eastern longitudes and 32 deg. 15' to 34 deg. 15' northern latitude. The project aims at providing water for washing carbons, cooling systems and potable water purposes in Tabas carbon power plant. Investigating the origin, age and nature of different water resources and relationships between these resources is the main objective of conducting isotope studies in Tabas area. This will help in providing required water in the area. Determining under-investigation water resources, taking samples and isotope and chemical analysis of samples form methodology of present research. 18O and D stable environmental isotopes and T and 14C radioisotopes as well as results of chemical analysis of samples taken from different water resources have been used in studies. First stage of studies consists of sample-taking from 34 springs, 13 wells and 8 Qanats during both wet and dry seasons. Isotope and chemical analyses have been also made on taken samples. Main results achieved could be summarized as: 1) recharge centers of water resources are found in some parts beyond the study area; 2) regarding stable environmental isotopes tests results, recharge centers of water resources within the study area are mainly located in heights over 2,700 m; and 3) isotope and chemical tests results indicate a slight effect of evaporation on increasing salts contents of water resources in the area, whereas the increasing rate mainly depend on the rate of dissolving salts in evaporative and desert rocks on the course of groundwater flows. (author)

  6. Elaboration of a complex GIS application in a catchment area.

    Science.gov (United States)

    Németh, T; Szabó, J; Pásztor, L; Bakacsi, Zs

    2002-01-01

    Rearrangement of land resources after political changes has not yet been finished in Hungary. It is almost impossible to collect information necessary for planning activities on outer areas of settlements. The data are distributed among various organizations and can be found in diverse forms or there are no available data at all. However water quality protection has become legally ordered concerning municipal activities around Lake Balaton which is considered as the most important recreation area and tourist target in Hungary and is also affected by a number of factors providing sources of environmental conflicts. Settlements in a catchment area (Tetves Creek) on the southern shoreline of Lake Balaton in Central Hungary tendered a complex project for collecting sources of authentic data of the Hungarian rural areas along with systematizing and saving these data in a uniform GIS. An application using Autodesk MapGuide Program for Internet realization was developed. The implemented web-based system can be used in Internet and Intranet environments. PMID:12079095

  7. Efficient controller area network data compression for automobile applications

    Institute of Scientific and Technical Information of China (English)

    Yu-jing WU; Jin-Gyun CHUNG

    2015-01-01

    Controller area networks (CANs) have been designed for multiplexing communication between electronic control units (ECUs) in vehicles and many high-level industrial control applications. When a CAN bus is overloaded by a large number of ECUs connected to it, both the waiting time and the error probability of the data transmission are increased. Thus, it is desirable to reduce the CAN frame length, since the duration of data transmission is proportional to the frame length. In this paper, we present a CAN message compression method to reduce the CAN frame length. Experimental results indicate that CAN transmission data can be compressed by up to 81.06%with the proposed method. By using an embedded test board, we show that 64-bit engine management system (EMS) CAN data compression can be performed within 0.16 ms;consequently, the proposed algorithm can be successfully used in automobile applications.

  8. Training in radionuclide methodology and applications in biomedical area

    International Nuclear Information System (INIS)

    Full text: Training in the field of radionuclide methodology and applications in biomedical area is important to assure that radionuclide should duly be used without risk for patients or for technicians manipulating them. The National Atomic Energy Commission (CNEA) from its creation is giving training courses of different technical levels to those working in science and technology. The Course on Radionuclide Methodology and application is the most continuous, varied and requested within CNEA. This is a basic course mainly given to Biochemistry and Medicine. Its goal is to give both theoretical and practical knowledge for use and application of radionuclides bearing in mind radiological safety regulations. Personnel from CNEA and Nuclear Regulatory Authority (ARN) carry out teaching. On the other hand, a course for Technicians in Nuclear Medicine is giving supplying knowledge in this field, as well as expertise and practice to attend a responsible Medical Doctor. These curses comprise radionuclide methodology, anatomy, physiology, instrumentation and practical applications in Nuclear Medicine. Statistics concerning these course are giving. (author)

  9. Sustainability Assessment for Agriculture Scenarios in Europe's Mountain Areas: Lessons from Six Study Areas

    Science.gov (United States)

    Partidário, Maria Rosário; Sheate, William R.; Bina, Olivia; Byron, Helen; Augusto, Bernardo

    2009-01-01

    Sustainability assessment (SA) is a holistic and long-range strategic instrument capable of assisting policy-making in electing, and deciding upon, future development priorities. The outcomes of an SA process become more relevant and strengthened when conducted with multi-stakeholder engagement, which provides for multiple dialogues and perspectives. This was the object of research of the SA team in the context of BioScene ( Scenarios for Reconciling Biodiversity Conservation with Declining Agriculture Use in Mountain Areas in Europe), a three-year project (2002-2005) funded by the European Union 5th Framework Program, which aimed to investigate the implications of agricultural restructuring and decline for biodiversity conservation in the mountain areas of Europe, using three distinct methodological streams: the ecological, the socio-economic, and the SA approaches. The SA approach drew on the previous two to assess the importance for biodiversity management of different scenarios of agri-environmental change and rural policy in six countries (France, Greece, Norway, Slovakia, Switzerland, and the United Kingdom), develop causal chains, include stakeholder views, and identify potential contributions for, or conflicts with, sustainability. This article tells how SA was used, what sustainability meant in each study area through different objectives of sustainability considered, discusses the methods used in SA, and the benefits arising. The SA was conducted by a team independent of any study area, who developed and oversaw the application of the SA methodology, assisting national teams, and developing a cross-country understanding of the sustainability of proposed scenarios in the different geographical and social contexts, and their implications for policy-making. Finally, it reflects on the persistent challenges of interdisciplinary research, compounded by multi-cultural teams, and concludes on the BioScene’s lessons for the further development and application

  10. The fusion applications study - FAME

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.R.; Engholm, B.A.; Bourque, R.F.; Cheng, E.T.; Schaffer, M.J.; Wong, C.P.C.

    1986-11-01

    The Fusion Applications and Market Evaluation (''FAME'') study, being conducted by GA Technologies for Lawrence Livermore National Laboratory (LLNL) and US Department of Energy, Office of Fusion Energy, (US DOE) is described. This two-year program has a FY86 objective of Evaluating Alternative Applications of Fusion, and a FY87 goal of Exploring Innovative Applications. Applications are being reviewed and categorized into Baseline, Nuclear, Chemical, Electromagnetic, and Thermal application categories. The ''traditional'' applications of electricity generation, fissile fuel and tritium production, and hydrogen production continue to look attractive. Particularly promising new applications to date, with potential for near-term markets, are isotope production and radiation processing, especially when allied with the traditional application of electricity production. The economics of separate applications as well as coproduction are discussed. The combination of electricity and /sup 60/Co production appears to be one of the most attractive.

  11. Students' and Teachers' Application of Surface Area to Volume Relationships

    Science.gov (United States)

    Taylor, Amy R.; Jones, M. Gail

    2013-02-01

    The National Science Education Standards emphasize teaching unifying concepts and processes such as basic functions of living organisms, the living environment, and scale (NRC 2011). Scale includes understanding that different characteristics, properties, or relationships within a system might change as its dimensions are increased or decreased (NRC 2011). One such relationship involves surface area to volume which is a pervasive concept that can be found throughout different sciences. This concept is important for students to not only understand the association of the two, but to also be able to apply this relationship in science contexts. The purpose of this study is to investigate the factors that influence the understanding surface area to volume relationships. This study examined middle school students', high school students', and science teachers' logical thinking skills (including proportional reasoning), visual-spatial skills, and understandings of surface area to volume relationships. Regression results indicated that participants' reasoning abilities and components of visual-spatial skills could be possible predictors for one's ability to understand surface area to volume relationships. Implications for teaching scale concepts such as surface area to volume relationships in the science classroom are discussed.

  12. Case studies: Alligator Rivers Area - ERA experience

    International Nuclear Information System (INIS)

    The Kakadu Region Social Impact Study (KRSIS) was commissioned in 1996 as an outcome of the environmental impact assessment process associated with the proposed Jabiluka uranium mine. The objective of KRSIS was to provide 'a clear statement of aboriginal experiences, values and aspirations regarding development of the region; and a proposed community development programme to enhance and/or mitigate impacts associated with development of the region'. Key stakeholders represented in overseeing the study included the Northern Land Council, the aboriginal community, Energy Resources of Australia (ERA) and the Northern Territory (NT) and Commonwealth governments. The study was jointly funded by the Australian government and Energy Resources of Australia, the mining company owning the Ranger and Jabiluka uranium interests. KRSIS reported on 18 issues of major significance in November 2000 and, while progress has been made in responding to these recommendations, a number have been incorporated into continuing programmes by both the Commonwealth (Federal) and Northern Territory governments. It has been accepted that the township of Jabiru could not remain a closed mining town (the original concept), and the town's future as a regional centre was discussed at a series of community forums. A major issue has been to increase the level of involvement in town development by aboriginal people, especially the traditional landowners. This is also being addressed through specific actions of the Jabiru Sustainability Working Group (JSWG). It was agreed in KRSIS that social impact monitoring should be considered essential in the future. To date, it has proven very difficult to obtain adequate funding for this work, and to determine who or what sort of organization should be in charge of progress in this area. To date, negotiations continue between representatives of the native people and Parks Australia as to what suitable performance indicators there are for social impact monitoring

  13. Application of Bayesian regularized BP neural network model for analysis of aquatic ecological data--A case study of chlorophyll-a prediction in Nanzui water area of Dongting Lake

    Institute of Scientific and Technical Information of China (English)

    XU Min; ZENG Guang-ming; XU Xin-yi; HUANG Guo-he; SUN Wei; JIANG Xiao-yun

    2005-01-01

    Bayesian regularized BP neural network(BRBPNN) technique was applied in the chlorophyll-a prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS 11.0 software, the BRBPNN model was established between chlorophyll-a and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.00078426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll-a declined in the order of alga amount > secchi disc depth(SD) > electrical conductivity (EC) . Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-a concentration, total phosphorus(TP) and total nitrogen(TN) were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data(chlorophyll-a prediction) and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.

  14. Studies on deaf mobile application

    Science.gov (United States)

    Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

    2016-08-01

    The deaf normally considered to be disabled that do not need any mobile technology due to the inabilities of hearing and talking. However, many deaf are using mobile phone in their daily life for various purposes such as communication and learning. Many studies have attempted to identify the need of deaf people in mobile application and level of usage of the applications. This study aims in studying the recent research conducted on deaf mobile application to understand the level of importance of mobile technology for this disabled community. This paper enable identification of studies conducted are limited and the need of more research done of this disabled people to ensure their privilege of using mobile technology and its application, which leads to the identification of deaf user requirement for mobile application as future study.

  15. A large area detector for x-ray applications

    International Nuclear Information System (INIS)

    A large area detector for x-ray synchrotron applications has been developed. The front end of this device consist of a scintillator coupled to a fiber-optic taper. The fiber-optic taper is comprised of 4 smaller (70 mm x 70 mm) tapers fused together in a square matrix giving an active area of 140 mm x 140 mm. Each taper has a demagnification of 5.5 resulting in four small ends that are 12 mm diagonally across. The small ends of each taper are coupled to four microchannel-plate-based image intensifiers. The output from each image intensifier is focused onto a Charge Coupled Device (CCD) detector. The four CCDs are read out in parallel and are independently controlled. The image intensifiers also act as fast (20 ns) electronic shutters. The system is capable of displaying images in real time. Additionally, with independent control on the readout of each row of data from the CCD, the system is capable of performing high speed imaging through novel readout manipulation

  16. Telemed: Ehealth applications applied to underserved areas in Latin America

    International Nuclear Information System (INIS)

    Access to medical care is sometimes very difficult to be reached from people living in rural and underserved areas. This problem is very well known in rural areas in Brazil. Citizens have no access to health care. They have to travel hundreds of kilometres to receive medical care. In this paper, we will propose a medical network based on state-of-the-art medical imaging application that addresses the problems of providing health care from a distance. Additionally, we are going to show preliminarily results of the first year of the system deployment and utilization in undeserved regions in Brazil. The total number of patients submitted to ultrasound examinations, during the 10 months of projects' medical trials, is 321. The exams have begun with the elderly people (hypertension and diabetes cases) with 90% above 50-years-old. Fifty-four percent were male and 46% were female. From those exams, 67 exams (21%) needed a second medical opinion and were transmitted to Santa Casa hospital in Porto Alegre, Brazil, one of the referral medical centres. From those second opinions of Santa Casa, 12 exams had to be repeated since the acquired images were not sufficient to give a correct diagnosis. The Lagoa Tres Cantos medical doctor performed also preventive exams with patients who had not presented any symptoms (70%)

  17. State waste discharge permit application: 400 Area secondary cooling water

    International Nuclear Information System (INIS)

    This document constitutes the Washington Administrative Code 173-216 State Waste Discharge Permit Application that serves as interim compliance as required by the Consent Order DE 91NM-177, for the 400 Area Secondary Cooling Water stream. As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permitting Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered in to Consent Order DE 91NM-177. The Consent Order DE 91NM-177 requires a series of permitting activities for liquid effluent discharges

  18. A User's Version View of a Robustified, Bayesian Weighted Least-Squares Recursive Algorithm for Interpolating AVHRR-NDVI Data: Applications to an Animated Visualization of the Phenology of a Semi-Arid Study Area

    Science.gov (United States)

    Hermance, J. F.; Jacob, R. W.; Bradley, B. A.; Mustard, J. F.

    2005-12-01

    .5 months. Instabilities during large time gaps in the data are suppressed by introducing an expectation of minimum roughness on the fitted time series. Our next significant computational step involves a constrained least squares fit to the observed NDVI data. Residuals between the observed NDVI value and the predicted starting model are computed, and the inverse of these residuals provide the weights for a weighted least squares analysis whereby a set of annual eighth-order splines are fit to the 7 years of NDVI data. Although a series of independent 8-th order annual functionals over a period of 7 years is intrinsically unstable when there are significant data gaps, the splined versions for this specific application are quite stable due to explicit continuity conditions on the values and derivatives of the functionals across contiguous years, as well as a priori constraints on the predicted values vis-a-vis the assumed initial model. Our procedure allows us to robustly interpolate original unequally-spaced NDVI data with a new time series having the most-appropriate, user-defined time base. We apply this approach to the temporal behavior of vegetation in our 150 x 150 km study area. Such a small area, being so rich in vegetation diversity, is particularly useful to view in map form and by animated annual and multi-year time sequences, since the interrelation between phenology, topography and specific usage patterns becomes clear.

  19. Conceptual study of superconducting urban area power systems

    Science.gov (United States)

    Noe, Mathias; Bach, Robert; Prusseit, Werner; Willén, Dag; Gold-acker, Wilfried; Poelchau, Juri; Linke, Christian

    2010-06-01

    Efficient transmission, distribution and usage of electricity are fundamental requirements for providing citizens, societies and economies with essential energy resources. It will be a major future challenge to integrate more sustainable generation resources, to meet growing electricity demand and to renew electricity networks. Research and development on superconducting equipment and components have an important role to play in addressing these challenges. Up to now, most studies on superconducting applications in power systems have been concentrated on the application of specific devices like for example cables and current limiters. In contrast to this, the main focus of our study is to show the consequence of a large scale integration of superconducting power equipment in distribution level urban power systems. Specific objectives are to summarize the state-of-the-art of superconducting power equipment including cooling systems and to compare the superconducting power system with respect to energy and economic efficiency with conventional solutions. Several scenarios were considered starting from the replacement of an existing distribution level sub-grid up to a full superconducting urban area distribution level power system. One major result is that a full superconducting urban area distribution level power system could be cost competitive with existing solutions in the future. In addition to that, superconducting power systems offer higher energy efficiency as well as a number of technical advantages like lower voltage drops and improved stability.

  20. Reverse osmosis application studies

    International Nuclear Information System (INIS)

    To assess the feasibility of applying reverse osmosis (RO) and ultrafiltration (UF) for effective treatment of process and waste streams from operations at Ontario Hydro's thermal and nuclear stations, an extensive literature survey has been carried out. It is concluded that RO is not at present economic for pretreatment of Great Lakes water prior to ion exchange demineralization for boiler makeup. Using both conventional and novel commercial membrane modules, RO pilot studies are recommended for treatment of boiler cleaning wastes, fly ash leachates, and flue gas desulphurization scrubber discharges for removal of heavy metals. Volume reduction and decontamination of nuclear station low-level active liquid waste streams by RO/UF also appear promising. Research programmes are proposed

  1. Students’ understanding and application of the area under the curve concept in physics problems

    Directory of Open Access Journals (Sweden)

    N. Sanjay Rebello

    2011-06-01

    Full Text Available This study investigates how students understand and apply the area under the curve concept and the integral-area relation in solving introductory physics problems. We interviewed 20 students in the first semester and 15 students from the same cohort in the second semester of a calculus-based physics course sequence on several problems involving the area under the curve concept. We found that only a few students could recognize that the concept of area under the curve was applicable in physics problems. Even when students could invoke the area under the curve concept, they did not necessarily understand the relationship between the process of accumulation and the area under a curve, so they failed to apply it to novel situations. We also found that when presented with several graphs, students had difficulty in selecting the graph such that the area under the graph corresponded to a given integral, although all of them could state that “the integral equaled the area under the curve.” The findings in this study are consistent with those in previous mathematics education research and research in physics education on students’ use of the area under the curve.

  2. Cedar Keys Wilderness study area : Cedar Keys National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Cedar Keys National Wildlife Refuge. It discusses the history of the study area, its...

  3. The Colorado Plateau coal assessment study area, 2000 (cpstdyg)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This is a coverage of the Colorado Plateau coal assessment study area. The study area outline was drawn on the county lines that most closely outline the...

  4. Island Bay Wilderness study area : Island Bay National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Island Bay National Wildlife Refuge. It discusses the history of the study area, its...

  5. Modelling catchment areas for secondary care providers: a case study.

    Science.gov (United States)

    Jones, Simon; Wardlaw, Jessica; Crouch, Susan; Carolan, Michelle

    2011-09-01

    Hospitals need to understand patient flows in an increasingly competitive health economy. New initiatives like Patient Choice and the Darzi Review further increase this demand. Essential to understanding patient flows are demographic and geographic profiles of health care service providers, known as 'catchment areas' and 'catchment populations'. This information helps Primary Care Trusts (PCTs) to review how their populations are accessing services, measure inequalities and commission services; likewise it assists Secondary Care Providers (SCPs) to measure and assess potential gains in market share, redesign services, evaluate admission thresholds and plan financial budgets. Unlike PCTs, SCPs do not operate within fixed geographic boundaries. Traditionally, SCPs have used administrative boundaries or arbitrary drive times to model catchment areas. Neither approach satisfactorily represents current patient flows. Furthermore, these techniques are time-consuming and can be challenging for healthcare managers to exploit. This paper presents three different approaches to define catchment areas, each more detailed than the previous method. The first approach 'First Past the Post' defines catchment areas by allocating a dominant SCP to each Census Output Area (OA). The SCP with the highest proportion of activity within each OA is considered the dominant SCP. The second approach 'Proportional Flow' allocates activity proportionally to each OA. This approach allows for cross-boundary flows to be captured in a catchment area. The third and final approach uses a gravity model to define a catchment area, which incorporates drive or travel time into the analysis. Comparing approaches helps healthcare providers to understand whether using more traditional and simplistic approaches to define catchment areas and populations achieves the same or similar results as complex mathematical modelling. This paper has demonstrated, using a case study of Manchester, that when estimating

  6. DESIGN OF FUZZY EXPERT SYSTEMS AND ITS APPLICATIONS IN SOME MEDICAL AREAS

    OpenAIRE

    Allahverdi, Novruz

    2014-01-01

    This paper is the survey of studies that include design processes of some fuzzy expert systems for applications in some medical area. Recent studies of us that include fuzzy expert systems that make use of fuzzy logic method were described. Some of fuzzy expert systems mentioned in this paper have been developed as first time. Followings were investigated; the risk of prostate cancer, risk of coronary heart disease, degree of child anemia, determination the level of iron deficiency anemia, di...

  7. Study of application of protective measures for the public and remediation of contaminated areas in case of nuclear and / or radiological accidents in Brazil; Estudo da aplicacao de medidas de protecao para o publico e de remediacao de areas contaminadas em caso de acidentes nucleares e/ou radiologicos no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Diogo Neves Gomes da

    2011-07-01

    Since the radiological accident in Goiania in 1987, the IRD (Institute of Radiological Protection and Dosimetry - IRD / CNEN) has been developing tools to support decision-making processes after a nuclear or radiological accident which leads to an environmental contamination and to an exposure of individuals the public These processes include the establishment of a supporting multicriteria model, which involves the application of protective and remediation measures of contaminated areas in tropical environments. In this study, it was performed an evaluation of the efficiency of these measures in order to determine the consequences of their implementation, based on results obtained from the code SIEM (Emergency Integrated System), which constitutes an environmental mode1 developed at IRD to simulate this type of accident. In order to perform this evaluation, it was first developed a database containing descriptions of various protection/remediation measures, which could be applied nationwide. Afterwards, some basic scenarios were established, considering the environmental, housing and food characteristics of the population of the vicinity of the nuclear power plants in Angra dos Reis (state of Rio de Janeiro). Thus, the accident simulations were carried out separately containing releases of {sup 137}Cs, {sup 90}Sr and 131 I. The results showed that the dose reduction varies according to the extent and the timing of the remediation measure applied. Although it is possible to establish some basic guidelines, generic solutions are not recommended, since the resulting doses are highly dependent on the actual situation. Any decision-making process should be made case by case, according to the actual conditions of the affected area and to the occupation characteristics and use of the affected areas, considering the characteristics of the source term of contamination, the time of the year in which the accident occurs, the local agricultural practices and food habits of

  8. 2008 USDA Forest Service Lidar: Sandy River Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Watershed Sciences, Inc. collected Light Detection and Ranging (LiDAR) data for the Sandy River study area in collaboration with the USDA Forest Service. The areas...

  9. Areas Nacionales de Estudio Ambiental: Una Guia. (National Environmental Study Area: A Guide).

    Science.gov (United States)

    National Park Service (Dept. of Interior), Washington, DC.

    This booklet, the Spanish version of SE 014 817, is a guide for teachers and resource managers who are interested in establishing National Environmental Study Areas (NESA) or interested in receiving NESA recognition for their on-going environmental study area programs. It outlines the characteristics and procedures of the program; the nature,…

  10. Application of Participatory Method to Selection of Project Demonstration Area

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The Sino-Japan cooperation project of "Vegetation Rehabilitation Demonstration and Planning in Sandstorm Jeopardized Area around Beijing" introduced participatory method to select the project area. Through investigating the socioeconomic indicators of 9 villages in Beijing and Hebei Province as well as the farmers’ willingness to participate in forestry operation activities, the vegetation restoration demonstration areas were selected, including Hantai Village, Baicaowa Village and Xiabachi Village, respect...

  11. Hyperspectral Remote Sensing of Urban Areas: An Overview of Techniques and Applications

    Directory of Open Access Journals (Sweden)

    Helmi Z.M. Shafri

    2012-06-01

    Full Text Available Over the past two decades, hyperspectral remote sensing from airborne and satellite systems has been used as a data source for numerous applications. Hyperspectral imaging is quickly moving into the mainstream of remote sensing and is being applied to remote sensing research studies. Hyperspectral remote sensing has great potential for analysing complex urban scenes. However, operational applications within urban environments are still limited, despite several studies that have explored the capabilities of hyperspectral data to map urban areas. In this paper, we review the methods for urban classification using hyperspectral remote sensing data and their applications. The general trends indicate that combined spatial-spectral and sensor fusion approaches are the most optimal for hyperspectral urban analysis. It is also clear that urban hyperspectral mapping is currently limited to airborne data, despite the availability of spaceborne hyperspectral systems. Possible future research directions are also discussed.

  12. City of Richland 300 Area industrial wastewater permit application

    International Nuclear Information System (INIS)

    Battelle-Pacific Northwest Labs and Westinghouse Hanford Co. are responsible for operating most of the facilities within the 300 Area; other contractors are also involved. The document gives briefly water/wastewater data: water sources, water usage, water discharge/loss, NPDES permit status, plant sewer outlets size and flow, etc. The document also includes the following attachments: 300 Area building list, Oct. 1993-Oct. 1994 300 Area water balance, waste shipments for CY 1994, complete chemical listing, sanitary sewer sampling results (12/19/94, 1/18/95, 1/15/95), and priority pollutant listings

  13. Real-time analysis application for identifying bursty local areas related to emergency topics.

    Science.gov (United States)

    Sakai, Tatsuhiro; Tamura, Keiichi

    2015-01-01

    Since social media started getting more attention from users on the Internet, social media has been one of the most important information source in the world. Especially, with the increasing popularity of social media, data posted on social media sites are rapidly becoming collective intelligence, which is a term used to refer to new media that is displacing traditional media. In this paper, we focus on geotagged tweets on the Twitter site. These geotagged tweets are referred to as georeferenced documents because they include not only a short text message, but also the documents' posting time and location. Many researchers have been tackling the development of new data mining techniques for georeferenced documents to identify and analyze emergency topics, such as natural disasters, weather, diseases, and other incidents. In particular, the utilization of geotagged tweets to identify and analyze natural disasters has received much attention from administrative agencies recently because some case studies have achieved compelling results. In this paper, we propose a novel real-time analysis application for identifying bursty local areas related to emergency topics. The aim of our new application is to provide new platforms that can identify and analyze the localities of emergency topics. The proposed application is composed of three core computational intelligence techniques: the Naive Bayes classifier technique, the spatiotemporal clustering technique, and the burst detection technique. Moreover, we have implemented two types of application interface: a Web application interface and an android application interface. To evaluate the proposed application, we have implemented a real-time weather observation system embedded the proposed application. we used actual crawling geotagged tweets posted on the Twitter site. The weather observation system successfully detected bursty local areas related to observed emergency weather topics. PMID:25918679

  14. Some biomedical applications of Balanites aegyptiaca grown naturally in radioactive area, Southeastern Desert, Egypt

    International Nuclear Information System (INIS)

    Balanites aegyptiaca is a naturally grown desert plant at some radioactive places in Wadi El-Gemal area, Southeastern Desert. The aim of the present study was to highlight on the B. aegyptiaca species grown naturally at radioactive places in Wadi El-Gemal area (fruit part) on the ability of using the fruit in some biomedical application (glucose, cholesterol, triglycerides, HDL-cholesterol, LDL-cholesterol and diabetes). The investigated plant was collected from different location at Wadi El-Gemal area. The uranium content was determined previously and different concentrations from the fruit with highest uranium content were used to examine the effect of B. aegyptiaca (fruit part) on the glucose, triglycerides, total cholesterol (HDL and LDL-cholesterol) levels using experimental rats. Different analysis techniques were used in order to determine different parameters. The obtained data suggest the beneficial role of B. aegyptiaca fruit as an anti-diabetic and hypo-lipidimic agent.

  15. OLED study for military applications

    Science.gov (United States)

    Barre, F.; Chiquard, A.; Faure, S.; Landais, L.; Patry, P.

    2005-07-01

    The presentation deals with some applications of OLED displays in military optronic systems, which are scheduled by SAGEM DS (Defence and Security). SAGEM DS, one of the largest group in the defence and security market, is currently investigating OLED Technologies for military programs. This technology is close from being chosen for optronic equipment such as future infantry night vision goggles, rifle-sight, or, more generally, vision enhancement systems. Most of those applications requires micro-display with an active matrix size below 1". Some others, such as, for instance, ruggedized flat displays do have a need for higher active matrix size (1,5" to 15"). SAGEM DS takes advantages of this flat, high luminance and emissive technology in highly integrated systems. In any case, many requirements have to be fulfilled: ultra-low power consumption, wide viewing angle, good pixel to pixel uniformity, and satisfactory behaviour in extreme environmental conditions.... Accurate measurements have been achieved at SAGEM DS on some micro display OLEDs and will be detailed: luminance (over 2000 cd/m2 achieved), area uniformity and pixel to pixel uniformity, robustness at low and high temperature (-40°C to +60°C), lifetime. These results, which refer to military requirements, provide a valuable feedback representative of the state of the art OLED performances.

  16. 77 FR 37402 - Data Specifications for Collecting Study Area Boundaries

    Science.gov (United States)

    2012-06-21

    ..., 76 FR 73830, November 29, 2011, and seeks comment on this proposal. In the USF/ICC Transformation... percent of an incumbent's study area. In the USF/ICC Transformation FNPRM, 76 FR 78384, December 16, 2011... area. The geographic independent variables used in the regressions were rolled up to the study...

  17. Protocol of Magnetic Field Area Network and its Applications

    International Nuclear Information System (INIS)

    The social needs are increasing in the wireless communication technology based on sensors for the monitoring of natural disasters such as avalanche and storm, the management of underground conditions from ground sinking and landslide, the monitoring of pipes, wires buried under the ground, the management of building and bridge, and the monitoring of the pollutions such as soils and water. However, the conventional wireless communication systems based on EM (Electro Magnetic) waves have not supported reliable communication because of large signal strength attenuation around soil, water, and metals. In order to handle this problem, various efforts in the wireless communication area have been conducted. Magnetic Field Area Network (MFAN) supports the reliable communication service without large signal attenuation around water, soil, and metal. Therefore, Magnetic Field Area Network (MFAN) is expected to be one of promising solutions to the limit of the conventional technologies such as Radio Frequency Indentification (RFID) and Wireless Sensor Network (WSN)

  18. Protocol of Magnetic Field Area Network and its Applications

    Energy Technology Data Exchange (ETDEWEB)

    Won, Yunjae; Kang, Shinjae; Lim, Seungok [Korea Electronics Technology Institute, Seoul (Korea, Republic of); Kahng, Hyunkook [Korea Univ., Seoul (Korea, Republic of)

    2012-03-15

    The social needs are increasing in the wireless communication technology based on sensors for the monitoring of natural disasters such as avalanche and storm, the management of underground conditions from ground sinking and landslide, the monitoring of pipes, wires buried under the ground, the management of building and bridge, and the monitoring of the pollutions such as soils and water. However, the conventional wireless communication systems based on EM (Electro Magnetic) waves have not supported reliable communication because of large signal strength attenuation around soil, water, and metals. In order to handle this problem, various efforts in the wireless communication area have been conducted. Magnetic Field Area Network (MFAN) supports the reliable communication service without large signal attenuation around water, soil, and metal. Therefore, Magnetic Field Area Network (MFAN) is expected to be one of promising solutions to the limit of the conventional technologies such as Radio Frequency Indentification (RFID) and Wireless Sensor Network (WSN)

  19. Delineating Urban Fringe Area by Land Cover Information Entropy—An Empirical Study of Guangzhou-Foshan Metropolitan Area, China

    Directory of Open Access Journals (Sweden)

    Junyi Huang

    2016-05-01

    Full Text Available Rapid urbanization has caused many environmental problems, such as the heat island effect, intensifying air pollution, pollution from runoff, loss of wildlife habitat, etc. Accurate evaluations of these problems demand an accurate delineation of the spatial extent of the urban fringe. Conceptual and analytical ambiguity of the urban fringe and a general lack of consensus among researchers have made its measurement very difficult. This study reports a compound and reliable method to delineate the urban fringe area using a case study. Based on the 'fringe effect' theory in landscape ecology, the existing land cover information entropy model for defining the urban fringe is renewed by incorporating scale theory, cartography and urban geography theory. Results show that the urban fringe area of Guangzhou and Foshan metropolitan area covers an area of 2031 km2, and it occupies over 31% of the total study area. Result evaluation by industry structure data shows satisfactory correspondence with different land cover types. This paper reports the method and outcome of an attempt to provide an objective, repeatable and generally applicable method for mapping its spatial extent from remote sensing imageries, and could be beneficial to relevant urban studies and urban fringe management projects.

  20. Large-area metallic photonic lattices for military applications.

    Energy Technology Data Exchange (ETDEWEB)

    Luk, Ting Shan

    2007-11-01

    In this project we developed photonic crystal modeling capability and fabrication technology that is scaleable to large area. An intelligent optimization code was developed to find the optimal structure for the desired spectral response. In terms of fabrication, an exhaustive survey of fabrication techniques that would meet the large area requirement was reduced to Deep X-ray Lithography (DXRL) and nano-imprint. Using DXRL, we fabricated a gold logpile photonic crystal in the <100> plane. For the nano-imprint technique, we fabricated a cubic array of gold squares. These two examples also represent two classes of metallic photonic crystal topologies, the connected network and cermet arrangement.

  1. Seismic Noise Studies of Urbanized Areas at Puerto Vallarta Mexico

    Science.gov (United States)

    Lara Huerta, K. C.; Escudero, C. R.; Gomez, A.; Madrigal, L.

    2014-12-01

    The application of seismic noise techniques in urbanized environment becomes a valuable tool to obtain information that is critical in areas exposed to earthquakes. Damage distribution during large earthquakes is frequently conditioned by site effects, in this way we determine site effect using ambient noise measurements in the area of Puerto Vallarta, Mexico. We focus our microtremor measurements to the estimation of a subsoil structure. To perform this we use three different techniques H/V spectral ratios, array measurements of microtremors applying the SPAC and F-k techniques. This work discusses the results that were obtained applying these techniques to the urbanized areas of Puerto Vallarta city. We present a series of maps showing the result as well as analyzed its application to risk assessment.

  2. Performance characterization of large-area CMOS FPD for micro-CT applications

    Energy Technology Data Exchange (ETDEWEB)

    Kam, Soohwa; Kim, Hokyung; Jeon, Hosang [Pusan National Univ., Busan (Korea, Republic of)

    2013-10-15

    Recent advanced echnologies in a Si wafer growth and buttable detector module have overcomes the imaging detector size limitation to develop a large area digital radiography (DR) detector. With these advantages, the usage of the CMOS FPD for large-area x-ray detector applications (small-animal imaging, fluoroscopy, angiography, etc.) has been recently spotlighted. Although a-Si FPDs have many advantages such as a large imaging area, thin structure, and veiling glares, there are still some technical difficulties including relatively large pixel size and image lag to apply for a dynamic imaging applications such as a micro-CT for small-animal imaging. However, CMOS technology can be a solution for these technical limitations. Therefore, it is necessary to characterize the quantitative performance of CMOS FPD for small animal micro-CT application. In this study, we have investigated an imaging performance of CMOS FPD. As an imaging performance metrics, sensitivity, modulation-transfer function (MTF), noise-power spectrum (NPS), and detective quantum efficiency (DQE) have been investigated.

  3. DEVELOPMENT OF CROSS-BORDER AREAS. STUDY CASES REVIEW

    Directory of Open Access Journals (Sweden)

    Marcela\tȘLUSARCIUC

    2015-06-01

    Full Text Available The paper aims to review study cases found in the scientific literature concerning the development of cross- border areas in European Union and its neighbourhood. The introductory part of the paper is drawing few considerations about the cross-border areas. Further we identified in the specific literature relevant study cases that provide lessons learned, tools and models that can contribute to the development of the cross-border areas. The last part of the paper is focusing on an inquiry about how this lessons, learned, tools and models may be adapted in case of cross-border areas along the Romanian border with the EU Eastern Neighbourhood.

  4. Semantic Interoperability in Body Area Sensor Networks and Applications

    NARCIS (Netherlands)

    Bui, V.T.; Brandt, P.; Liu, H.; Basten, T.; Lukkien, J.

    2014-01-01

    Crucial to the success of Body Area Sensor Networks is the flexibility with which stakeholders can share, extend and adapt the system with respect to sensors, data and functionality. The first step is to develop an interoperable platform with explicit interfaces, which takes care of common managemen

  5. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-05-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construct a chloride deposition map in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia. We examined geographic (related to coastal distance, orographic, and atmospheric factors that may influence chloride deposition, using partial correlation and regression analyses. The results indicate that coastal distance, elevation, as well as terrain aspect and slope, appear to be significant factors controlling chloride deposition in the study area. Coastal distance accounts for 70% of spatial variability in bulk chloride deposition, with elevation, terrain aspect and slope an additional 15%. The results are incorporated into a de-trended residual kriging model (ASOADeK to produce a 1 km×1 km resolution bulk chloride deposition and concentration maps. The average uncertainty of the deposition map is about 20–30% in the western MLR, and 40–50% in the eastern MLR. The maps will form a useful basis for examining catchment chloride balance for the CMB application in the study area.

  6. Research and Application of Information Technology in Mining Area Railway

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper introduces the methods and technicalities of applicating information technology in a miningarea railway transport system. The pattern Client/Server is adopted in this system. There are two types of clients,i.e. PC and terminal. This article focuses on the system demand analysis, the data flow, the system architectureand some technical details.

  7. 200 West Groundwater Aggregate Area management study report

    International Nuclear Information System (INIS)

    This report presents the results of an aggregate area management study (AAMS) for the 200 West Groundwater Aggregate Area in the 200 Areas of the US Department of Energy (DOE) Hanford Site in Washington State. This scoping level study provides the basis for initiating Remedial Investigation/Feasibility Study (RI/FS) activities under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) or Resource Conservation and Recovery Act (RCRA), Facility Investigations (Rlq) and Corrective Measures Studies (CMS) under RCRA. This report also integrates select RCRA treatment, storage or disposal (TSD) closure activities with CERCLA and RCRA past practice investigations

  8. Reprint of: Biomedical applications reviewed: Hot topic areas

    Science.gov (United States)

    Bradley, D. A.; Wells, K.

    2014-02-01

    Making reference to the British Journal of Radiology and competitor journal titles, we look at the general area of biomedical physics, reviewing some of the associated topics in ionising radiation research attracting interest over the past 2 years. We also reflect on early developments that have paved the way for these endeavours. The talk is illustrated by referring to a number of biomedical physics areas in which this group has been directly involved, including novel imaging techniques that address compositional and structural makeup as well as use of elastically scattered X-ray phase contrast, radiation damage linking to possible pericardial effects in radiotherapy, simulation of microvascularity and oxygenation with a focus of radiation resistant hypoxic tumours, issues of high spatial resolution dosimetry and tissue interface radiotherapy with doses enhanced through use of high atomic number photoelectron conversion media.

  9. L-Area Cavitation Tests Final Analysis - Limits Application

    International Nuclear Information System (INIS)

    The L-Area cavitation test was designed to better define the onset of cavitation in the reactor system. The onset of gas evolution in the effluent piping and pump cavitation was measured using state-of-the-art equipment to provide data with a high confidence and low uncertainty level. The limits calculated from the new data will allow an approximate two percent increase in reactor power if the reactor is effluent temperature-limited with no compromise in reactor safety

  10. Rise of Data Mining: Current and Future Application Areas

    Directory of Open Access Journals (Sweden)

    Dharminder Kumar

    2011-09-01

    Full Text Available Knowledge has played a significant role on human activities since his development. Data mining is the process of knowledge discovery where knowledge is gained by analyzing the data store in very large repositories, which are analyzed from various perspectives and the result is summarized it into useful information. Due to the importance of extracting knowledge/information from the large data repositories, data mining has become a very important and guaranteed branch of engineering affecting human life in various spheres directly or indirectly. Advancements in Statistics, Machine Learning, Artificial Intelligence, Pattern recognition and Computation capabilities have given present days data mining functionality a new height. Data mining have various applications and these applications have enriched the various fields of human life including business, education, medical, scientific etc. Objective of this paper is to discuss various improvements and breakthroughs in the field of data mining from past to the present and also to explores the future trends.

  11. The United Nations programme on space applications: priority thematic areas

    Science.gov (United States)

    Haubold, H.

    The Third United Nations Conference on the Exploration and Peaceful Uses of Outer Space (UNISPACE III) was held in 1999 with efforts to identify world wide benefits of developing space science and technology, particularly in the developing nations. One of the main vehicles to implement recommendations of UNISPACE III is the United Nations Programme on Space Applications of the Office for Outer Space Affairs at UN Headquarters in Vienna. Following a process of prioritization by Member States, the Programme focus its activities on (i) knowledge-based themes as space law and basic space science, (ii) application-based themes as disaster management, natural resources management, environmental monitoring, tele-health, and (iii) enabling technologies such as remote sensing satellites, communications satellites, global navigation satellite systems, and small satellites. Current activities of the Programme will be reviewed. Further information available at http://www.oosa.unvienna.org/sapidx.html

  12. Review of Multimodal Biometrics: Applications, challenges and Research Areas

    OpenAIRE

    Prof. Vijay M. Mane; Prof. (Dr.) Dattatray V. Jadhav

    2009-01-01

    Biometric systems for today’s high security applications must meet stringent performance requirements. The fusion of multiple biometrics helps to minimize the system error rates. Fusion methods include processing biometric modalities sequentially until an acceptable match is obtained. More sophisticated methods combine scores from separate classifiers for each modality. This paper is an overview of multimodal biometrics, challenges in the progress of multimodal biometrics, the main research a...

  13. Study on Sustainable Development in Vulnerable Eco-areas

    Institute of Scientific and Technical Information of China (English)

    Zhang Juntao; Li Jin

    2004-01-01

    The vulnerable eco-area is one of the important research targets in the field of sustainable development. It is the requirement of building a welloff society in an all-round way that we should study more on the vulnerable eco-areas, deal with the relationship between environmental protection and economic development, speed up the economic development in these areas and increase the living standard of the local people. This paper puts forward the countermeasures of environment-economy coordination, on the basis of the recognition of ecoenvironment features and social economic conditions in the vulnerable eco-areas of China, in view of the progress in sustainable development studies of the vulnerable ones, taking the transitional areas of farming and pasturing in northeast China as an example to study the regional environment vulnerability.

  14. Variability of atmospheric pesticide concentrations between urban and rural areas during intensive pesticide application

    Science.gov (United States)

    Scheyer, Anne; Morville, Stéphane; Mirabel, Philippe; Millet, Maurice

    Intensive pesticide use leads to the contamination of water, soil and atmosphere. Atmospheric transport is responsible for pesticide dispersal over long distances. In this study, we evaluate the local dispersal of pesticides from agricultural to urban areas. For this purpose, three high-volume samplers, each equipped with a glass fiber filter and XAD-2 resin for the sampling of particulate and gas phase have been placed in a south-west transect (predominant wind direction) characteristic of rural and urban areas. The urban site (Strasbourg centre) is situated in the middle of two rural sites. Samples were taken simultaneously at three sites during pesticide treatments in autumn and spring 2002-2003. Sampling took place for 24 h at a flow rate of 10-15 m 3 h -1. The pesticides studied were those commonly used in the Alsace region for all crops (maize, cereal, vines …). Many of the pesticides analysed in atmospheric samples were not detected or observed very episodically at very low concentrations. For metolachlor, alachlor, trifluralin, atrazine and diflufenican, higher concentrations were observed, essentially during the application of these compounds. Moreover, some "spraying peaks" were observed for alachlor in the south rural site (near crops) at a level of 31 ng m -3 on 16-17 May 2003. These results show site and time dependence of atmospheric contamination by pesticides. A limited dispersal was also observed especially in the urban area during the application periods of pesticides.

  15. H-Area, K-Area, and Par Pond Sewage Sludge Application Sites groundwater monitoring report. Third quarter 1994

    International Nuclear Information System (INIS)

    Groundwater samples from the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control (SCDHEC) Construction Permit 12,076. Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the quired by SCDHEC Construction Permit 13,173. All samples are also analyzed as requested for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permits. No constituents exceeded the SCDHEC final Primary Drinking Water Standard in any well from the H-Area, K-Area, and Par Pond Sewage Sludge Application Sites. Aluminum and iron were above Flag 2 criteria in one or more wells in the three sites during third quarter 1994. These constituents were not analyzed during the previous quarter. Third quarter results are similar to results for first quarter 1994

  16. Seaweed Investment as Application in Development of Minapolitan Area

    Directory of Open Access Journals (Sweden)

    Caroline Caroline

    2013-12-01

    Full Text Available Consequences of regional autonomy is not easy, this is because a required area should look for alternative sources of financing regional. One of the sources of financing in the Brebes district is the development of seaweed cultivation to be exported to other countries. The calculations show that the investment in seaweed farming is feasible to be developed because of the many advantages gained than seaweed farming. The first advantage of the presence of a source of income for local communities and Brebes district, opening job opportunities broadly, to develop products made from seaweed such as cosmetics, pharmaceuticals, herbs, jelly, and so forth.

  17. Reprint of: Biomedical applications reviewed: Hot topic areas

    International Nuclear Information System (INIS)

    Making reference to the British Journal of Radiology and competitor journal titles, we look at the general area of biomedical physics, reviewing some of the associated topics in ionising radiation research attracting interest over the past 2 years. We also reflect on early developments that have paved the way for these endeavours. The talk is illustrated by referring to a number of biomedical physics areas in which this group has been directly involved, including novel imaging techniques that address compositional and structural makeup as well as use of elastically scattered X-ray phase contrast, radiation damage linking to possible pericardial effects in radiotherapy, simulation of microvascularity and oxygenation with a focus of radiation resistant hypoxic tumours, issues of high spatial resolution dosimetry and tissue interface radiotherapy with doses enhanced through use of high atomic number photoelectron conversion media. - Highlights: • Review of recent biomedical ionising radiation research. • Examples of novel imaging techniques addressing compositional and structural makeup among other examples. • Novel spatially fractionated beams in radiotherapy and dosimetric measurements

  18. The market value of cultural heritage in urban areas: an application of spatial hedonic pricing

    Science.gov (United States)

    Lazrak, Faroek; Nijkamp, Peter; Rietveld, Piet; Rouwendal, Jan

    2014-01-01

    The current literature often values intangible goods like cultural heritage by applying stated preference methods. In recent years, however, the increasing availability of large databases on real estate transactions and listed prices has opened up new research possibilities and has reduced various existing barriers to applications of conventional (spatial) hedonic analysis to the real estate market. The present paper provides one of the first applications using a spatial autoregressive model to investigate the impact of cultural heritage—in particular, listed buildings and historic-cultural sites (or historic landmarks)—on the value of real estate in cities. In addition, this paper suggests a novel way of specifying the spatial weight matrix—only prices of sold houses influence current price—in identifying the spatial dependency effects between sold properties. The empirical application in the present study concerns the Dutch urban area of Zaanstad, a historic area for which over a long period of more than 20 years detailed information on individual dwellings, and their market prices are available in a GIS context. In this paper, the effect of cultural heritage is analysed in three complementary ways. First, we measure the effect of a listed building on its market price in the relevant area concerned. Secondly, we investigate the value that listed heritage has on nearby property. And finally, we estimate the effect of historic-cultural sites on real estate prices. We find that, to purchase a listed building, buyers are willing to pay an additional 26.9 %, while surrounding houses are worth an extra 0.28 % for each additional listed building within a 50-m radius. Houses sold within a conservation area appear to gain a premium of 26.4 % which confirms the existence of a `historic ensemble' effect.

  19. 1988 Duck nesting study: Stillwater Wildlife Management Area

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — During the summer, 1988, we conducted a duck nesting study to determine nest success for ducks at Stillwater Wildlife Management Area (WMA). We calculated nest...

  20. Wilderness study areas : Hart Mountain National Antelope Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on two wilderness study areas located in the Hart Mountain National Antelope Refuge. The report only contains a map and summaries of...

  1. Hydrogeologic Areas of the Southwest Principal Aquifer (SWPA) study

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This raster dataset represents the boundaries of the hydrogeologic areas of the Southwest Principal Aquifer (SWPA) study of the National Water Quality Assessment...

  2. Bering Sea National Wildlife Refuge Wilderness study area

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Bering Sea National Wildlife Refuge now part of the Alaska Maritime National Wildlife...

  3. Sustainability Assessment of Future Scenarios: Methodology and Application to Mountain Areas of Europe

    Science.gov (United States)

    Sheate, William R.; Partidário, Maria Rosário Do; Byron, Helen; Bina, Olivia; Dagg, Suzan

    2008-02-01

    BioScene (scenarios for reconciling biodiversity conservation with declining agriculture use in mountain areas in Europe) was a three-year project (2002 2005) funded by the European Union’s Fifth Framework Programme, and aimed to investigate the implications of agricultural restructuring and decline for biodiversity conservation in the mountain areas of Europe. The research took a case study approach to the analysis of the biodiversity processes and outcomes of different scenarios of agri-environmental change in six countries (France, Greece, Norway, Slovakia, Switzerland, and the United Kingdom) covering the major biogeographical regions of Europe. The project was coordinated by Imperial College London, and each study area had a multidisciplinary team including ecologists and social and economic experts, which sought a comprehensive understanding of the drivers for change and their implications for sustainability. A key component was the sustainability assessment (SA) of the alternative scenarios. This article discusses the development and application of the SA methodology developed for BioScene. While the methodology was objectives-led, it was also strongly grounded in baseline ecological and socio-economic data. This article also describes the engagement of stakeholder panels in each study area and the use of causal chain analysis for understanding the likely implications for land use and biodiversity of strategic drivers of change under alternative scenarios for agriculture and rural policy and for biodiversity management. Finally, this article draws conclusions for the application of SA more widely, its use with scenarios, and the benefits of stakeholder engagement in the SA process.

  4. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-09-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many coastal areas of Australia, may have perturbed catchment chloride balance conditions for appropriate use in CMB applications. In order to deal with these issues, a high resolution chloride deposition map in the coastal region is needed. In this study, we examined geographic, orographic, and atmospheric factors influencing chloride deposition in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia, using partial correlation and regression analyses. The results indicate that coastal distance, and terrain aspect and slope are two most significant factors controlling chloride deposition. Coastal distance accounts for 65% spatial variability in chloride deposition, with terrain aspect and slope for 8%. The deposition gradient is about 0.08 gm-2 year-1 km-1 as one progresses inland. The results are incorporated into a published de-trended residual kriging approach (ASOADeK to produce a 1 km×1 km resolution annual chloride deposition map and a bulk precipitation chloride concentration map. The average uncertainty of the deposition map is about 30% in the western MLR, and over 50% in the eastern MLR. The maps will form a very useful basis for examining catchment chloride balances for use in the CMB application in the study area.

  5. Wide area 2D/3D imaging development, analysis and applications

    CERN Document Server

    Langmann, Benjamin

    2014-01-01

    Imaging technology is an important research area and it is widely utilized in a growing number of disciplines ranging from gaming, robotics and automation to medicine. In the last decade 3D imaging became popular mainly driven by the introduction of novel 3D cameras and measuring devices. These cameras are usually limited to indoor scenes with relatively low distances. Benjamin Langmann introduces medium and long-range 2D/3D cameras to overcome these limitations. He reports measurement results for these devices and studies their characteristic behavior. In order to facilitate the application o

  6. Flood Insurance Study Morgan County, Utah, Unincorporated Areas

    OpenAIRE

    Federal Emergency Management Agency

    1990-01-01

    This Flood Insurance Study investigates the existence and severity of flood hazards in the unincorporated areas of Morgan County, Utah, and aids in the administration of the National Flood Insurance Act of 1968 and the Flood Disaster Protection Act of 1973. This study has developed flood risk data for various areas of the community that will be used to establish actuarial flood insurance rates and assist the community in its efforts to promote sound floodplain management. Minimum floodplain...

  7. Large-area nanoimprint and application to cell cultivation

    Science.gov (United States)

    Miyauchi, Akihiro; Kuwabara, Kosuke; Hasegawa, Mitsuru; Ogino, Masahiko

    2016-04-01

    Nanoimprint has been expanding to various industrial fields, such as optical device, semiconductor and bio-devices. High-throughput machine and process are necessary for industrialization of thermal nanoimprint products. Conventional parallel press method needs long tact time because of the long heating and cooling process in thermal nanoimprint. We proposed the sheet nanoimprint method which uses the newly developed belt nanomold. The continuous process became possible by using the belt nanomold and we demonstrated the 200- and 25-nm dots formation onto over 10-m-long films with 10-mm/s film speed. For bio-application, we demonstrated the spheroid formation of HeLa and hepatic cells on nanoimprinted pillar structures. The cells were easy to coalesce on the pillar structure and the spheroids were formed. Uniform-size spheroids were formed at predefined positions by using micro-incubator structure.

  8. Construction Biotechnology: a new area of biotechnological research and applications.

    Science.gov (United States)

    Stabnikov, Viktor; Ivanov, Volodymyr; Chu, Jian

    2015-09-01

    A new scientific and engineering discipline, Construction Biotechnology, is developing exponentially during the last decade. The major directions of this discipline are selection of microorganisms and development of the microbially-mediated construction processes and biotechnologies for the production of construction biomaterials. The products of construction biotechnologies are low cost, sustainable, and environmentally friendly microbial biocements and biogrouts for the construction ground improvement. The microbial polysaccharides are used as admixtures for cement. Microbially produced biodegradable bioplastics can be used for the temporarily constructions. The bioagents that are used in construction biotechnologies are either pure or enrichment cultures of microorganisms or activated indigenous microorganisms of soil. The applications of microorganisms in the construction processes are bioaggregation, biocementation, bioclogging, and biodesaturation of soil. The biotechnologically produced construction materials and the microbially-mediated construction technologies have a lot of advantages in comparison with the conventional construction materials and processes. Proper practical implementations of construction biotechnologies could give significant economic and environmental benefits. PMID:26070432

  9. Application of multispectral imaging detects areas with neuronal myelin loss, without tissue labelling.

    Science.gov (United States)

    Vazgiouraki, Eleftheria; Papadakis, Vassilis M; Efstathopoulos, Paschalis; Lazaridis, Iakovos; Charalampopoulos, Ioannis; Fotakis, Costas; Gravanis, Achille

    2016-04-01

    The application of multispectral imaging to discriminate myelinated and demyelinated areas of neural tissue is herein presented. The method is applied through a custom-made, multispectral imaging monochromator, coupled to a commercially available microscope. In the present work, a series of spinal cord sections were analysed derived from mice with experimental autoimmune encephalomyelitis (EAE), an experimental model widely used to study multiple sclerosis (MS). The multispectral microscope allows imaging of local areas with loss of myelin without the need of tissue labelling. Imaging with the aforementioned method and system is compared in a parallel way with conventional methods (wide-field and confocal fluorescence microscopies). The diagnostic sensitivity of our method is 90.4% relative to the 'gold standard' method of immunofluorescence microscopy. The presented method offers a new platform for the possible future development of anin vivo, real-time, non-invasive, rapid imaging diagnostic tool of spinal cord myelin loss-derived pathologies. PMID:26510556

  10. Limits of the applicability of the social structural model in Czech rural areas

    Directory of Open Access Journals (Sweden)

    R. Kopriva

    2010-12-01

    Full Text Available This article focuses on the voting behaviour of citizens in rural areas of the Czech Republic. Within thetheoretical embodiment of the relationships between the individual in a social structure and voting behaviour, aso-called social-structural model for voting behaviour is often mentioned. However, when explaining thebehaviour of the voting behaviour of citizens living under the conditions of the Czech Republic the applicabilityof this model is of course disputable. Due to the predominant inconsistencies of the social status of citizens ofrural areas, it is not at all possible to determine the hypothesis of the applicability of a social-structural model ofvoting behaviour for citizens living in the conditions of the Czech rural countryside. The aim of this article is,through a case study of Zatec region, to prove the predominant (inconsistency of the social status of the givenpopulation.

  11. Drones application on snow and ice surveys in alpine areas

    Science.gov (United States)

    La Rocca, Leonardo; Bonetti, Luigi; Fioletti, Matteo; Peretti, Giovanni

    2015-04-01

    First results from Climate change are now clear in Europe, and in Italy in particular, with the natural disasters that damaged irreparably the territory and the habitat due to extreme meteorological events. The Directive 2007/60/EC highlight that an "effective natural hazards prevention and mitigation that requires coordination between Member States above all on natural hazards prevention" is necessary. A climate change adaptation strategy is identified on the basis of the guidelines of the European Community program 2007-2013. Following the directives provided in the financial instrument for civil protection "Union Civil Protection Mechanism" under Decision No. 1313/2013 / EU of the European Parliament and Council, a cross-cutting approach that takes into account a large number of implementation tools of EU policies is proposed as climate change adaptation strategy. In last 7 years a network of trans-Alpine area's authorities was created between Italy and Switzerland to define an adaptive strategy on climate change effects on natural enviroment based on non structural remedies. The Interreg IT - CH STRADA Project (STRategie di ADAttamento al cambiamento climatico) was born to join all the non structural remedies to climate change effects caused by snow and avalanches, on mountain sources, extreme hydrological events and to manage all transnational hydrological resources, involving all stakeholders from Italy and Switzerland. The STRADA project involved all civil protection authorities and all research centers in charge of snow, hydrology end civil protection. The Snow - meteorological center of the Regional Agency for Environment Protection (CNM of ARPA Lombardia) and the Civil Protection of Lombardy Region created a research team to develop tools for avalanche prediction and to observe and predict snow cover on Alpine area. With this aim a lot of aerial photo using Drone as been performed in unusual landscape. Results of all surveys were really interesting on a

  12. Flexible riser integrity management: areas of concern and applications

    Energy Technology Data Exchange (ETDEWEB)

    Podskarbi, Mateusz [Schlumberger Servicos de Petroleo Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Flexible risers are key enables for both deep water and shallow water offshore production developments. Number of flexible risers installed worldwide is into several thousands with two main concentration areas - offshore Brazil and North Sea. Flexible risers are subject to significant loads including environmental impacts, vessel motions, internal temperature and pressure as well as substantial installation loads. Excessive loads of one type or a combination of various types of loads can cause damage to the flexible that can lead to a catastrophic failure. Industry observed number of failures increasing in recent years. Operators and manufacturing companies are taking various steps to address this issue. One of possible approaches is to use monitoring instrumentation to measure riser response and integrity in real time. This paper reviews various types of flexible riser damage mechanisms caused by impact damage, corrosion, excessive pressure, armor wire rupture, compromising flexible riser minimum bend radius, excessive fatigue loading, etc. Failure mechanisms are reviewed with particular focus on the consequences that it causes in terms of risk to the infrastructure and detectable changes. Further part of the paper is focused on monitoring techniques employed and available to detect particular types of failure mechanisms. Systematic review of the monitoring techniques is provided with specific attention given to ability of these techniques to provide early warnings of riser failure. Evaluation of monitoring techniques versus modes of operation and failure mechanism is key to selecting appropriate system that ensures effectiveness of the integrity management program. (author)

  13. Operational water management applications of snowcovered area observations

    Science.gov (United States)

    Rango, A.; Salomonson, V. V.; Foster, J. L.

    1975-01-01

    An effort was made to evaluate the utility of satellite snowcover observations for seasonal streamflow prediction. On a representative, large watershed(10 to the 5th power to 10 to the sixth power sq km) it was found, based on six years of data, that meteorological satellite observations of snow cover early in the snowmelt season exhibit a relationship to seasonal runoff having a statistically significant coefficient of determination of 0.92. Analyses of LANDSAT-1 snow-cover observations over the Wind River Mountains of Wyoming reveals that for areas with infrequent cloud cover the extent of snowcover and its change with time can be monitored on watersheds as small as 10 sq km in areal extent. The change in the snow cover with time as observed from LANDSAT-1 is found to reflect major differences in seasonal runoff from high altitude (mean altitude 3 km) and low altitude ( 3 km) watersheds. There are quantitative indications that LANDSAT observations over small watersheds could be used in a manner similar to that employed for meteorological satellite observations to relate the percent of a basin snowcovered on a given data to seasonal runoff.

  14. Wastewater Land Application Permit LA-000141 Renewal Information for the Central Facilities Area Sewage Treatment Plant

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-02-01

    On July 25, 1994, the State of ldaho Division of Environmental Quality issued a Wastewater Land Application Permit, #LA-000141-01, for the Central Facilities Area Sewage Treatment Plant. The permit expires August 7, 1999. This report is being submitted with the renewal application and specifically addresses; Wastewater flow; Wastewater characteristics; Impacts to vegetation in irrigation area; Impacts to soil in irrigation area; Evaluation of groundwater monitoring wells for Wastewater Land Application Permit purposes; Summary of trends observed during the 5-year reporting period; and Projection of changes and new processes.

  15. The RISCOM Model in practice - recent experiences from new areas of application

    International Nuclear Information System (INIS)

    The RISCOM project started with a pilot study in 1997, funded by the Swedish Nuclear Power Inspectorate (SKI) and the Swedish Radiation Protection Institute (SSI). The RISCOM Model was further developed, tested and used as part of the European RISCOM II project. The RISCOM Model has emerged as a result of efforts in the area of nuclear waste management to make decision processes for e.g. the selection of sites for final disposal transparent. This is also the area where the model was first applied when hearings were designed for the Swedish site selection process. In recent years the RISCOM Model has been used to analyze the prerequisites for transparency in several areas, and the Transparency Forum idea has been applied in practical situations, most notably for risk assessment of mobile telephone systems and cleaning-up and remediation of contaminated sites. In this paper we summarize recent experiences in applying the RISCOM model in different policy making areas, comment on some aspects where the model offers unique possibilities and emphasize some crucial issues with regard to future applications

  16. The RISCOM Model in practice - recent experiences from new areas of application

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Kjell [Karita Research AB, Taeby (Sweden); Wene, Clas-Otto [Wenergy, Lund (Sweden)

    2006-09-15

    The RISCOM project started with a pilot study in 1997, funded by the Swedish Nuclear Power Inspectorate (SKI) and the Swedish Radiation Protection Institute (SSI). The RISCOM Model was further developed, tested and used as part of the European RISCOM II project. The RISCOM Model has emerged as a result of efforts in the area of nuclear waste management to make decision processes for e.g. the selection of sites for final disposal transparent. This is also the area where the model was first applied when hearings were designed for the Swedish site selection process. In recent years the RISCOM Model has been used to analyze the prerequisites for transparency in several areas, and the Transparency Forum idea has been applied in practical situations, most notably for risk assessment of mobile telephone systems and cleaning-up and remediation of contaminated sites. In this paper we summarize recent experiences in applying the RISCOM model in different policy making areas, comment on some aspects where the model offers unique possibilities and emphasize some crucial issues with regard to future applications.

  17. Application and analysis of debris-flow early warning system in Wenchuan earthquake-affected area

    Science.gov (United States)

    Liu, D. L.; Zhang, S. J.; Yang, H. J.; Zhao, L. Q.; Jiang, Y. H.; Tang, D.; Leng, X. P.

    2016-02-01

    The activities of debris flow (DF) in the Wenchuan earthquake-affected area significantly increased after the earthquake on 12 May 2008. The safety of the lives and property of local people is threatened by DFs. A physics-based early warning system (EWS) for DF forecasting was developed and applied in this earthquake area. This paper introduces an application of the system in the Wenchuan earthquake-affected area and analyzes the prediction results via a comparison to the DF events triggered by the strong rainfall events reported by the local government. The prediction accuracy and efficiency was first compared with a contribution-factor-based system currently used by the weather bureau of Sichuan province. The storm on 17 August 2012 was used as a case study for this comparison. The comparison shows that the false negative rate and false positive rate of the new system is, respectively, 19 and 21 % lower than the system based on the contribution factors. Consequently, the prediction accuracy is obviously higher than the system based on the contribution factors with a higher operational efficiency. On the invitation of the weather bureau of Sichuan province, the authors upgraded their prediction system of DF by using this new system before the monsoon of Wenchuan earthquake-affected area in 2013. Two prediction cases on 9 July 2013 and 10 July 2014 were chosen to further demonstrate that the new EWS has high stability, efficiency, and prediction accuracy.

  18. DEVELOPMENT OF CFD SIMULATION APPLICATIONS FOR LOCAL-SCALE AREAS AND POTENTIAL INTERFACE WITH MESOSCALE MODELS

    Science.gov (United States)

    The presentation summarizes developments of ongoing applications of fine-scale (geometry specific) CFD simulations to urban areas within atmospheric boundary layers. Enabling technology today and challenges for the future are discussed. There is a challenging need to develop a ...

  19. F- and H-area Sewage Sludge Application Sites: Groundwater monitoring report

    International Nuclear Information System (INIS)

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites. Tritium and aluminum have been the primary nonpermit constituents exceeding standards at the F-Area Sewage Sludge Application Site. These constituents were not analyzed second quarter 1993. Other constituents also have exceeded standards at this site, but only sporadically, and none of those were analyzed second quarter 1993

  20. F- and H-Area Sewage Sludge Application Sites groundwater monitoring report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Historically and currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites except iron, lead, and manganese, which occur in elevated concentrations frequently in FSS wells and occasionally in HSS wells. Tritium and aluminum are the primary nonpermit constituents that exceed standards at the F-Area Sewage Sludge Application Site. Other constituents also exceed standards at this site but only sporadically.

  1. F- and H-area Sewage Sludge Application Sites: Groundwater monitoring report. Second quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites. Tritium and aluminum have been the primary nonpermit constituents exceeding standards at the F-Area Sewage Sludge Application Site. These constituents were not analyzed second quarter 1993. Other constituents also have exceeded standards at this site, but only sporadically, and none of those were analyzed second quarter 1993.

  2. Environmental impact of industrial wastes on marine area, case study: Port Sudan coastal area

    International Nuclear Information System (INIS)

    This study was carried out to determine the effect of the industrial wastes on marine environment in Port Sudan area. A very intensive study has been made to identify types of pollutions drained in seawater at study area of Red Sea coast. Samples were taken from three stations (1, 2 and 3) at study area and the following analysis were made: Temperature, salinity, hydrogen ion concentration, dissolved oxygen, biochemical oxygen demand, nutrient, oil and grease. The laboratory results revealed that wastes pollute the marine environment as the cooling water from studied industries which is drain into the seawater increases the degree of temperature approximately from 6 to 12 C degree above the allowed rate, the matter which was adverse effect on the environment and living marine creatures due to the sudden change of temperature degree. Also, it was found that the great amount of oil spills discharged into seawater due to many factors such as: cooling water, oil spills from ships and loading and discharging operations of crude oil ships. Accordingly these oils spills might have a deadly effect on living marine creatures, which have been mention in details through out this research. Hence, and to minimize this adverse effect of industrial wastes and others on the marine environment, may recommend to the following: Pretreatment to the industrial wastes should be taking before its draining into the Red Sea coastal area. Surveillance all ships into the port and observing loading and discharging operations as well as those ships in the regional waters and implementing the international maritime laws. Enlightenment the industrial administrators and manpower working with them about the severity which will definitely cause the marine environmental deterioration as a result of industrial wastes. To punish every one who violates the laws of environment protection. Thus, can be safeguarding the environment from pollutions and consequently develop the natural resources and proceed

  3. Applicability of the homogeneous flow model to pressure drop in straight pipe and across area changes

    International Nuclear Information System (INIS)

    This study was undertaken to evaluate systematically the conditions under which the homogeneous model may be applied to prediction of frictional two-phase pressure drop in straight pipes and abrupt area changes. The approach taken was first to examine the available observations on flow pattern transitions. On the basis of the observations in the literature, as well as additional observations made with the Freon-Freon vapor system, a simple criterion for the existance of homogeneous flow was established. The homogeneous model was then compared to the available pressure drop data in the region where it could be considered applicable. It was concluded that the data on pressure drop across abrupt area changes are reasonably consistent with the predicted transition to homogeneous flow in straight pipes. Although contraction pressure drop may be approximated by the homogeneous model over a wide velocity range, the model should only be used for expansion pressure drops at very high mass flow rates. Any further studies of the inter-relationship of flow pattern and area change pressure drop will require void fraction--quality relationships which consider flow patterns. (U.S.)

  4. The radiological study of areas gastricae in chronic gastritis

    International Nuclear Information System (INIS)

    A chronic gastritis is common and clinically significant, but specific findings were rarely described in UGIS. And the authors attempted to clarify the area gastrica of the stomach related to the chronic gastritis. The authors reviewed 'Areae gastricae' micromucosal patterns of stomach, retrospectively with double contrast barium meal study in 16 cases, histologically proven cases of chronic gastritis by endoscopic biopsy from January 1, 1980 to June 30, 1980. Here the commonest site of chronic gastritis is evident in 12 cases in pyloric gland area, and a sixe of area gastrica shows above 2.5mm in longest diameter with combinding morphology, regular to irregular, 3 to 1 and coarse barium accumulations of intervening sulci. The chronic gastritis could be suggested with this better technique of UGIS

  5. Elk and Deer Study, Material Disposal Area G, Technical Area 54: Source document

    International Nuclear Information System (INIS)

    As nuclear research has become more prevalent, environmental contamination from the disposal of radioactive waste has become a prominent issue. At Los Alamos National Laboratory (LANL) in northern New Mexico, radioactive contamination from disposal operations has raised some very specific concerns. Material Disposal Area G (Area G) is the primary low-level radioactive waste disposal site at LANL and occupies an area adjacent to land belonging to the Native American community of the Pueblo of San Ildefonso. Analyses of soil and vegetation collected from the perimeter of Area G have shown concentrations of radionuclides greater than background concentrations established for northern New Mexico. As a result, Pueblo residents had become concerned that contaminants from Area G could enter tribal lands through various ecological pathways. The residents specifically questioned the safety of consuming meat from elk and deer that forage near Area G and then migrate onto tribal lands. Consequently, this study addresses the uptake of 3H, 90Sr, totU, 238Pu, 239Pu, 241Am, and 137Cs by elk (Cervus elaphus) and deer (Odocoileus hemionus) that forage around the perimeter of Area G and the associated doses to the animals and to humans who consume these animals. Radionuclide uptake by and internal dose to animals was estimated using equations modified from National Council on Radiological Protection Report 76. The Residual Radiation computer code was used to estimate the external dose to animals and the dose to humans consuming meat. Soil and water concentrations from the perimeter of Area G and from background regions in northern New Mexico were averaged over 4 years (1993--1996) and used as input data for the models. Concentration estimates generated by the model correspond to the concentration range measured in actual tissue samples from elk and deer collected at LANL. The highest dose estimates for both animals (0.028 mrad/d) and humans (0.072 mrem/y) were well below guidelines

  6. Studies on application of radiation and radioisotopes

    International Nuclear Information System (INIS)

    With the completion of construction of KMRR, the facility and technology of radiation application will be greatly improved. This study was performed as follows; (1) Studies on the production and application of radioisotopes. (2) The development of radiation processing technology. (3) The application of Irradiation techniques for food preservation and process improvement. (4) Studies on the radiation application for the development of genetic resources (5) Development of the radioisotope (RI) production facilities for Korea Multipurpose Research Reactor (KMRR)

  7. Studies on application of radiation and radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Rok; Lee, Ji Bok; Lee, Yeong Iil; Jin, Joon Ha; Beon, Myeong Uh; Park, Kyeong Bae; Han, Heon Soo; Jeong, Yong Sam; Uh, Jong Seop; Kang, Kyeong Cheol; Cho, Han Ok; Song, Hui Seop; Yoon, Byeong Mok; Jeon, Byeong Jin; Park, Hong Sik; Kim, Jae Seong; Jeong, Un Soo; Baek, Sam Tae; Cho, Seong Won; Jeon, Yeong Keon; Kim, Joon Yeon; Kwon, Joong Ho; Kim, Ki Yeop; Yang, Jae Seung; No, Yeong Chang; Lee, Yeong Keun; Shin, Byeong Cheol; Park, Sang Joon; Hong, Kwang Pyo; Cho, Seung Yeon; Kang, Iil Joon; Cho, Seong Ki; Jeong, Yeong Joo; Park, Chun Deuk; Lee, Yeong Koo; Seo, Chun Ha; Han, Kwang Hui; Shin, Hyeon Young; Kim, Jong Kuk; Park, Soon Chul; Shin, In Cheol; Lee, Sang Jae; Lee, Ki Un; Lim, Yong Taek; Park, Eung Uh; Kim, Dong Soo; Jeon, Sang Soo [Korea Atomic Energy Res. Inst., Taejon (Korea, Republic of)

    1993-05-01

    With the completion of construction of KMRR, the facility and technology of radiation application will be greatly improved. This study was performed as follows; (1) Studies on the production and application of radioisotopes. (2) The development of radiation processing technology. (3) The application of Irradiation techniques for food preservation and process improvement. (4) Studies on the radiation application for the development of genetic resources (5) Development of the radioisotope (RI) production facilities for Korea Multipurpose Research Reactor (KMRR).

  8. Gulf Islands Wilderness study area : Gulf Island National Wildlife Refuges : Wilderness study report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Gulf Island National Wildlife Refuges. It discusses the history of the study area, its...

  9. Recent progress of RF cavity study at Mucool Test Area

    Science.gov (United States)

    Yonehara, Katsuya; MTA working Group

    2013-02-01

    In order to develop an RF cavity that is applicable for a muon beam cooling channel, a new facility, called Mucool Test Area (MTA) has been built at Fermilab. MTA is a unique facility whose purpose is to test RF cavities in various conditions. There are 201 and 805 MHz high power sources, a 4-Tesla solenoid magnet, a cryogenic system including a Helium liquifier, an explosion proof apparatus to operate gaseous/liquid Hydrogen, and a beam transport line to send an intense H- beam from the Fermilab Linac accelerator to the MTA hall. Recent activities at MTA will be discussed in this document.

  10. Recent Progress of RF Cavity Study at Mucool Test Area

    CERN Document Server

    Yonehara, Katsuya

    2012-01-01

    In order to develop an RF cavity that is applicable for a muon beam cooling channel, a new facility, called Mucool Test Area (MTA) has been built at Fermilab. MTA is a unique facility whose purpose is to test RF cavities in various conditions. There are 201 and 805 MHz high power sources, a 4-Tesla solenoid magnet, a cryogenic system including a Helium liquifier, an explosion proof apparatus to operate gaseous/liquid Hydrogen, and a beam transport line to send an intense H- beam from the Fermilab Linac accelerator to the MTA hall. Recent activities at MTA will be discussed in this document.

  11. Artificial neural network estimation of soil erosion and nutrient concentrations in runoff from land application areas

    Science.gov (United States)

    The transport of sediment and nutrients from land application areas is an environmental concern. New methods are needed for estimating soil and nutrient concentrations of runoff from cropland areas on which manure is applied. Artificial Neural Networks (ANN) trained with a Backpropagation (BP) algor...

  12. 78 FR 59415 - Formula Grants for Rural Areas: Guidance and Application Instructions

    Science.gov (United States)

    2013-09-26

    ... review DOT's complete Privacy Act Statement published in the Federal Register on April 11, 2000 (65 FR... Federal Transit Administration Formula Grants for Rural Areas: Guidance and Application Instructions... implementation of the section 5311 Rural Area Formula Program. The purpose of this proposed circular is...

  13. Sedimentation studies at MUDA catchment area, Kedah, Malaysia

    International Nuclear Information System (INIS)

    A study on the sediment size distribution and determination of sediment density profile in the selected area of Muda dam catchment area, Kedah is presented. The objective of the study was to establish a base line data of the input sedimentation with regards to the effects of development within the catchment in the future. Three main sampling locations were identified namely at Sungai Teliang, Sungai Muda and Muda reservoir. Measurement of sediment thickness was performed by using nuclear gauges i.e. direct transmission and backscattering methods. Results showed that the grain size distribution of sediment ranges from gravel to clay sizes. In the reservoir and downstream of the river, most of the samples studied consisting of fine sediment i.e silt and clay sizes (<63,um). However, sediment distribution in the upstream section of Sungai Teliang mainly consist of fine to coarse sand. Sediment density profiles in the reservoir showed little changes, whereas bed sediment profiles in the river cross-sectional areas exhibit some changes. The results also showed that thickness of bedload sediment were different from one location to another, in which the thickness may achieve up to 0.75 metre in some areas. Based on the sediment distribution profile analysis, the study site could be divided into two parts comprising of dynamic area (region) covering selected locations along the river and deposited sediment in the reservoir. Basic information derived from this study may provide as one of the important inputs for the MADA reservoir management authority in monitoring, supervising y and identifying rate and source of sediment in the catchment area

  14. Application of Remote Sensors in Mapping Rice Area and Forecasting Its Production: A Review

    Directory of Open Access Journals (Sweden)

    Mostafa K. Mosleh

    2015-01-01

    Full Text Available Rice is one of the staple foods for more than three billion people worldwide. Rice paddies accounted for approximately 11.5% of the World’s arable land area during 2012. Rice provided ~19% of the global dietary energy in recent times and its annual average consumption per capita was ~65 kg during 2010–2011. Therefore, rice area mapping and forecasting its production is important for food security, where demands often exceed production due to an ever increasing population. Timely and accurate estimation of rice areas and forecasting its production can provide invaluable information for governments, planners, and decision makers in formulating policies in regard to import/export in the event of shortfall and/or surplus. The aim of this paper was to review the applicability of the remote sensing-based imagery for rice area mapping and forecasting its production. Recent advances on the resolutions (i.e., spectral, spatial, radiometric, and temporal and availability of remote sensing imagery have allowed us timely collection of information on the growth and development stages of the rice crop. For elaborative understanding of the application of remote sensing sensors, following issues were described: the rice area mapping and forecasting its production using optical and microwave imagery, synergy between remote sensing-based methods and other developments, and their implications as an operational one. The overview of the studies to date indicated that remote sensing-based methods using optical and microwave imagery found to be encouraging. However, there were having some limitations, such as: (i optical remote sensing imagery had relatively low spatial resolution led to inaccurate estimation of rice areas; and (ii radar imagery would suffer from speckles, which potentially would degrade the quality of the images; and also the brightness of the backscatters were sensitive to the interacting surface. In addition, most of the methods used in

  15. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    Directory of Open Access Journals (Sweden)

    Chao-Hua Xue, Shun-Tian Jia, Jing Zhang and Jian-Zhong Ma

    2010-01-01

    Full Text Available This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted.

  16. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    International Nuclear Information System (INIS)

    This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted. (topical review)

  17. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    OpenAIRE

    Chao-Hua Xue, Shun-Tian Jia, Jing Zhang and Jian-Zhong Ma

    2010-01-01

    This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted.

  18. Heavy Precipitation impacts and emergency planning - developing applicable strategies for a metropolitan area

    Science.gov (United States)

    Kutschker, Thomas; Glade, Thomas

    2016-04-01

    Heavy rainfall in central Europe is one of the assumed effects of climate change, which occurs with large seasonal and regional differences in its magnitude. The extent of loss depends on natural parameters (e.g. topography and vegetation) as well as on socio-economic factors like urbanized and industrialized areas and population density. Dangerous cascade effects appear, if critical infrastructure like the electrical power supply is affected. In some cases mudflows and flash floods cause inundated or undercut roads and cause a high demand for fast and effective assistance of the authorities. The civil protection in Germany is based on a federal system with a bottom-up command-structure and responsibility to the local community. Commonly this responsibility is taken by the fire brigades and civil protection units of the community or district. After heavy rainfall in an urban area, numerous incidents and emergency calls appearing at a time are overstressing the human and technical resources of the fire brigades within the local authority frequently. In this study, a method of comprehensive evaluation of meteorological data and the operation data from local fire brigades shall be developed for the Rhine-Main-Area in order to identify particular affected spots of heavy rain and bundle resources of the fire brigades. It is to be found out if the study area contains regions with a particularly high exposure to heavy rain and high application numbers of the fire department and whether there is a relationship of rainfall and frequency of use. To evaluate particular local effects on the fire brigades capability, a brief analysis of the meteorological data provided by the German Meteorological Service (DWD) as well as the evaluation of the incident data of the affected fire brigades, is used to frame a realistic approach. In particular fire brigade operation data can be used accordingly to describe the intensity of the aftermath when heavy precipitation strikes a certain

  19. Modeling and Simulation of Wide Area Communication for Centralized PMU-based Applications

    OpenAIRE

    Chenine, Moustafa; Nordström, Lars

    2011-01-01

    Phasor-based wide-area monitoring and control (WAMC) systems are becoming a reality with increased research, development, and deployments. Many potential control applications based on these systems are being proposed and researched. These applications are either local applications using data from one or a few phasor measurement units (PMUs) or centralized utilizing data from several PMUs. An aspect of these systems, which is less well researched, is the WAMC system's dependence on high-perfor...

  20. Evaluating U.S. National Heritage Areas: Theory, Methods, and Application

    Science.gov (United States)

    Laven, Daniel; Ventriss, Curtis; Manning, Robert; Mitchell, Nora

    2010-08-01

    Like many governmental actors in recent decades, the U.S. National Park Service (NPS) has operated increasingly through partnerships with other state and federal agencies, non-governmental organizations (NGOs), community groups, and private sector corporations. Perhaps the most salient example of this trend toward partnerships is the rapid growth and development of national heritage areas (NHAs). Since the first NHA received congressional designation in 1984, NHAs have become an increasingly popular strategy for protecting and managing landscapes. To date, congressional designation has been granted to 49 NHAs, making them one of the fastest growing initiatives involving the NPS. Despite this growth, no prior research has examined the efficacy or effectiveness of the NHA model. This article introduces the NHA concept, while reviewing the literature on evaluation research and its application to protected area management. We then offer an NHA program theory model for evaluating NHAs. The model was developed using a theory-based, process evaluation approach, along with 90 qualitative interviews conducted at three study sites: Blackstone River Valley National Heritage Corridor, MA-RI (BLAC); Delaware and Lehigh National Heritage Corridor, PA (DELE); and Cane River National Heritage Area, LA (CANE). We conclude by discussing the key challenges and implications associated with developing a long-term research agenda for evaluating NHAs.

  1. Radiological environmental study in area to future anthropogenic transformations

    International Nuclear Information System (INIS)

    In this work the existent relationship is identified between the data radioecologics and the geological formations to the north area Holguin with the objective to study the possible incidence that this can have in the rate environmental dose in the event of transformations anthropogenic the place

  2. Comparative study of mutational factors in high background and control areas

    International Nuclear Information System (INIS)

    The results of further study of the socioeconomic environmental factors concerning with mutations in the high background radiation area and the control area are presented in this paper. The factors studied can be divided into two categories: (1) those which have been confirmed to be related to mutations, including occupations involved with poisonous and noxious substances, application of pesticides, smoking, alcohol drinking, and exposure to medical X-ray, etc; (2) those which may not necessarily relate to mutations, such as socioeconomic states etc. Case-control study has been used. 'Case' and 'control' were selected from the inhabitants in the high background and control areas respectively by means of two-stage sampling method, and matched by sex and age. The data were collected by interview. There were 459 pairs available for analysis. The results of studied factors of category 1 show that no significant difference was found between two areas except that the frequency of medical X-ray exposure of the people in the control area was a little higher than that in the high background area. For the factors of category 2, the results show that the economic condition and educational level of the control group were better than those of the high background group. Besides, the papulation of high background area was more steady than that of control area

  3. Comparing Web Applications with Desktop Applications: An Empirical Study

    DEFF Research Database (Denmark)

    Pop, Paul

    2002-01-01

    In recent years, many desktop applications have been ported to the world wide web in order to reduce (multiplatform) development, distribution and maintenance costs. However, there is little data concerning the usability of web applications, and the impact of their usability on the total cost of...... developing and using such applications. In this paper we present a comparison of web and desktop applications from the usability point of view. The comparison is based on an empirical study that investigates the performance of a group of users on two calendaring applications: Yahoo!Calendar and Microsoft...... Calendar. The study shows that in the case of web applications the performance of the users is significantly reduced, mainly because of the restricted interaction mechanisms provided by current web browsers....

  4. K-Area and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report

    International Nuclear Information System (INIS)

    Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13,173 and, as requested, for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Dichloromethane (methylene chloride) exceeded the final Primary Drinking Water Standard in a single well of the K-Area Sewage Sludge Application Site during fourth quarter 1993. Aluminum, iron, and lead, reported in excess of the SRS Flag 2 criteria at both the K-Area and Par Pond Sewage Sludge Application Sites during third quarter 1993, were not analyzed fourth quarter

  5. Applicability of three complementary relationship models for estimating actual evapotranspiration in urban area

    Directory of Open Access Journals (Sweden)

    Nakamichi Takeshi

    2015-06-01

    Full Text Available The characteristics of evapotranspiration estimated by the complementary relationship actual evapotranspiration (CRAE, the advection-aridity (AA, and the modified advection-aridity (MAA models were investigated in six pairs of rural and urban areas of Japan in order to evaluate the applicability of the three models the urban area. The main results are as follows: 1 The MAA model could apply to estimating the actual evapotranspiration in the urban area. 2 The actual evapotranspirations estimated by the three models were much less in the urban area than in the rural. 3 The difference among the estimated values of evapotranspiration in the urban areas was significant, depending on each model, while the difference among the values in the rural areas was relatively small. 4 All three models underestimated the actual evapotranspiration in the urban areas from humid surfaces where water and green spaces exist. 5 Each model could take the effect of urbanization into account.

  6. The applicability of public LCI databases in the framework of an integrated product policy in the area of electronics industry - a case study with the Swiss database ''ecoinvent''

    Energy Technology Data Exchange (ETDEWEB)

    Hischier, R.; Lehmann, M. [Swiss Federal Labs. for Materials Testing and Research, Technology and Society Lab, St. Gallen (Switzerland)

    2004-07-01

    Within the last couple of years, several initiatives for the creation of national Life-Cycle Inventory (LCI) databases have been taken - in Europe e.g. in Germany, in Denmark, in Sweden and in Switzerland. This presentation describes the content of such national LCI databases from the viewpoint of the electronics industry and shows its crucial importance in the framework of the application of the integrated product policy (IPP) to this sector. (orig.)

  7. Research trends in nanotechnology studies across geo-economic areas

    OpenAIRE

    Mario Coccia; Ugo Finardi; Diego Margon

    2010-01-01

    The purpose of this paper is to analyze the current temporal and spatial research trajectories in nanoscience and nanotechnology studies in order to display the worldwide patterns of research fields across main economic players. The results show the leadership of Europe and North America in nanotechnology research, although the role of China has been growing over time. Current nanotechnology studies have been growing in chemistry and medicine because of applications of nanomaterials mainly in...

  8. Wireless Body Area Networks and Its Emerging Technologies in Real Time Applications

    Directory of Open Access Journals (Sweden)

    Esther Evangelin

    2014-01-01

    Full Text Available With the rapid improvement of wireless communication and semiconductor technologies, the body area sensor network (BASN is fast developing. The BASN which is also referred to as the WBAN (Wireless Body Area Network, is widely used in medical applications and comprises of Body Sensors attached to human body. These body sensors will help to monitor the interior functions of the body. The data generated by the sensors is transmitted via the internet and collected in external servers which are then used for analysis. The sensors being flexible and compact consume less power and provide a perfect environment for wireless sensing research. The main area of application of the WBAN is the medical field although it can also be extended to other areas like gaming, entertainment, road safety etc. These sensors will help to increase sensitivity and specificity. These days body sensors are emerging as wearable computers such as Computer clothing, Google glass, Smart watches etc which paves the way for using it in many more real time applications. In this paper we have discussed in detail about the architecture, application areas, and characteristics of the WBAN and how they are attached with the human body. WBAN is a sure platform that will dominate all the future wireless applications.

  9. Short-term monitoring of benzene air concentration in an urban area: a preliminary study of application of Kruskal-Wallis non-parametric test to assess pollutant impact on global environment and indoor

    Directory of Open Access Journals (Sweden)

    Maria Chiara Mura

    2010-12-01

    Full Text Available In step with the need to develop statistical procedures to manage small-size environmental samples, in this work we have used concentration values of benzene (C6H6, concurrently detected by seven outdoor and indoor monitoring stations over 12 000 minutes, in order to assess the representativeness of collected data and the impact of the pollutant on indoor environment. Clearly, the former issue is strictly connected to sampling-site geometry, which proves critical to correctly retrieving information from analysis of pollutants of sanitary interest. Therefore, according to current criteria for network-planning, single stations have been interpreted as nodes of a set of adjoining triangles; then, a node pairs have been taken into account in order to estimate pollutant stationarity on triangle sides, as well as b node triplets, to statistically associate data from air-monitoring with the corresponding territory area, and c node sextuplets, to assess the impact probability of the outdoor pollutant on indoor environment for each area. Distributions from the various node combinations are all non-Gaussian, in the consequently, Kruskal-Wallis (KW non-parametric statistics has been exploited to test variability on continuous density function from each pair, triplet and sextuplet. Results from the above-mentioned statistical analysis have shown randomness of site selection, which has not allowed a reliable generalization of monitoring data to the entire selected territory, except for a single "forced" case (70%; most important, they suggest a possible procedure to optimize network design.

  10. Environmental study for radionuclides at Kurun-Uro area

    International Nuclear Information System (INIS)

    This work is aimed to study the environmental distribution of the terrestrial radionuclides and the resultant dose at Nuba mountains ( Kurun-Uro area ). This area has a high background natural radioactivity. More over it contains a rockphosphate zone lying between J. Kurun and J. Uro. Field scanning of gamma ray measurements on BGS- ISL Scintillomter was carried. At the same time different environment samples ( rock, soil, air, water and food ) were collected. These samples were treated then investigated on gamma spectrometry technique to determine radionuclides activity concentrations. X-ray fluorescent technique was used for the determination of P2O5 and other elements. For phosphate determination as P2O5 % the Bennelt Reed chemical method was used. From gamma counts and nuclides activity concentrations in soil samples the external exposure rate and the external Annual Effective Dose Equivalent (AEDE) were estimated. While the internal exposure rate and the internal (AEDE) were estimated from nuclides concentrations in air, water and food. The external (AEDE) were found to be 3.2 mSv at Kurun and 4.15 mSv at Uro. Over J. Kurun it is 20 mSv and 32 mSv over J. Uro. The internal AEDE were found to be 8.5 mSv and 12.9 mSv at Kurun and Uro respectively. The total AEDE is 11.7 mSv for Kurun area and 17 mSv for Uro. the AEDE at this area is seven times higher than the normal areas. The average P2O5 % in the rock samples results using (XRF) and wet chemical method is 25% and 19% for Kurun and Uro respectively, so this area is very promising for fertilizer production, but special care must be taken for radiation impact on the environment. (author).41 refs.,

  11. Optimizing malarial epidemiological studies in areas of low transmission

    DEFF Research Database (Denmark)

    Amerasinghe, Priyanie H; Alifrangis, Michael; van der Hoek, Wim; Wirtz, Robert A; Amerasinghe, Felix P; Konradsen, Flemming

    2005-01-01

    risk factor in this area was the location of houses relative to confirmed vector breeding sites. At the peak of the transmission season, the results pointed in the same direction, irrespective of the diagnostic method used. However, the importance of distance from the breeding site was not...... statistically significant when microscopy was used, which can be explained by the lower prevalence of microscopy positivity in comparison to the prevalence of ELISA- and PCR-positivity. This study suggests that in low-transmission areas, such as Sri Lanka, smaller sample sizes can be used for epidemiological...... research studies using PCR instead of microscopy to estimate parasite prevalence. This efficiency gain has to be weighed against the higher cost and complexity of the PCR. PCR cannot replace microscopy as the standard diagnostic procedure at the field level. ELISA is not directly comparable with microscopy...

  12. FLOOD STUDY IN THE DEJ AREA, USING MODERN COMPUTING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    F. ST. STOICA

    2013-03-01

    Full Text Available Floods have the potential to cause fatalities, displacement of people and damage to the environment, to severely compromise economic development and to undermine the economic activities of the Community. In developing policies referring to water and land uses Member States and the Community should consider the potential impacts that such policies might have on flood risks and the management of flood risks. In order to implement the EU directives, Romania is developing at a national level “Prevention, Protection and Minimizing Flood Effects Plan”; in Someş-Tisa hydrographic basin, the plan is implemented by Someş Tisa Water Board. This study is a brief presentation of the pilot study which is part of this program, undertaken in Dej area, at the confluence of two important rivers, Someşul Mare and Someşul Mic, where the flood of 1970 had a catastrophic impact; Dej area is a priority in the above mentioned plan.

  13. Study on Seismic Zoning of Sino-Mongolia Arc Areas

    Science.gov (United States)

    Xu, G.

    2015-12-01

    According to the agreement of Cooperation on seismic zoning between Institute of Geophysics, China Earthquake Administration and Research Center of Astronomy and Geophysics, Mongolian Academy of Science, the data of geotectonics, active faults, seismicity and geophysical field were collected and analyzed, then field investigation proceeded for Bolnay Faults, Ar Hutul Faults and Gobi Altay Faults, and a uniform earthquake catalogue of Mongolia and North China were established for the seismic hazard study in Sino-Mongolia arc areas. Furthermore the active faults and epicenters were mapped and 2 seismic belts and their 54 potential seismic sources are determined. Based on the data and results above mentioned the seismicity parameters for the two seismic belts and their potential sources were studied. Finally, the seismic zoning with different probability in Sino-Mongolia arc areas was carried out using China probabilistic hazard analysis method. By analyzing the data and results, we draw the following main conclusions. Firstly, the origin of tectonic stress field in the study areas is the collision and pressure of the India Plate to Eurasian Plate, passing from the Qinghai-Tibet Plateau. This is the reason why the seismicity is higher in the west than in the east, and all of earthquakes with magnitude 8 or greater occurred in the west. Secondly, the determination of the 2 arc seismic belts, Altay seismic belt and Bolnay-Baikal seismic belt, are reasonable in terms of their geotectonic location, geodynamic origin and seismicity characteristics. Finally, there are some differences between our results and the Mongolia Intensity Zoning map published in 1985 in terms of shape of seismic zoning map, especially in the areas near Ulaanbaatar. We argue that our relsults are reasonable if we take into account the data use of recent study of active faults and their parameters, so it can be used as a reference for seismic design.

  14. F- and H-Area Sewage Sludge Application Sites groundwater monitoring report

    International Nuclear Information System (INIS)

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. No constituent exceeded either the final Primary Drinking Water Standards or the SRS Flag 2 criteria during fourth quarter 1993. Iron, lead, and manganese were the only permit- required analytes that exceeded standards at the F- and H-Area Sewage Sludge Application Sites in 1993. Tritium, aluminum, and other constituents not included in the permit have exceeded standards at this site previously, but only sporadically. These constituents were not analyzed fourth quarter 1993

  15. F- and H-Area Sewage Sludge Application Sites Groundwater Monitoring Report: Third quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Currently, iron, lead, and manganese are the only permit-required analytes that exceed standards at the F- and H-Area Sewage Sludge Application Sites. Tritium and aluminum are the nonpermit constituents exceeding standards. Other constituents have exceeded standards at this site previously, but only sporadically.

  16. Preliminary paleomagnetic study on different rock types in Olkiluoto area

    Energy Technology Data Exchange (ETDEWEB)

    Mertanen, S. [Geological Survey of Finland, Espoo (Finland)

    2007-04-15

    Paleomagnetic test samples have been measured from different rock types in the Olkiluoto area. The main aim of the study has been to resolve the suitability of the rock types to paleomagnetic studies. Paleomagnetic studies are aimed to investigate the geological evolution of the Olkiluoto area by using remanent magnetization that has been blocked in the rocks in different geological processes. Altogether 20 cylinders were measured from five different rock types. The cylinders were demagnetized with alternating field and the remanent magnetizations were measured. The results were analysed with multicomponent analysing methods. According to preliminary studies, most of the test samples are weakly magnetized and do not carry stable remanent magnetization. However, part of the samples and rock types carry stable or semistable remanent magnetizations and are therefore favourable for further investigations. Especially the diabase dykes carry stable multicomponent magnetizations. Also the pegmatite dykes are worth of additional studies. Remanent magnetizations of test samples from TGG-gneisses, potassium feldspar porphyries and sulphidized rocks are weaker, but it is suggested that some new test samples would be useful for further studies. (orig.)

  17. Applicability of non-destructive substitutes for leaf area in different stands of Norway spruce (Picea abies L. Karst.) focusing on traditional forest crown measures

    OpenAIRE

    Laubhann, Daniel; Eckmüllner, Otto; Sterba, Hubert

    2010-01-01

    Since individual tree leaf area is an important measure for productivity as well as for site occupancy, it is of high interest in many studies about forest growth. The exact determination of leaf area is nearly impossible. Thus, a common way to get information about leaf area is to use substitutes. These substitutes are often variables which are collected in a destructive way which is not feasible for long term studies. Therefore, this study aimed at testing the applicability of using substit...

  18. Recycled Water Reuse Permit Renewal Application for the Central Facilities Area Sewage Treatment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Mike Lewis

    2014-09-01

    This renewal application for a Recycled Water Reuse Permit is being submitted in accordance with the Idaho Administrative Procedures Act 58.01.17 “Recycled Water Rules” and the Municipal Wastewater Reuse Permit LA-000141-03 for continuing the operation of the Central Facilities Area Sewage Treatment Plant located at the Idaho National Laboratory. The permit expires March 16, 2015. The permit requires a renewal application to be submitted six months prior to the expiration date of the existing permit. For the Central Facilities Area Sewage Treatment Plant, the renewal application must be submitted by September 16, 2014. The information in this application is consistent with the Idaho Department of Environmental Quality’s Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater and discussions with Idaho Department of Environmental Quality personnel.

  19. Application of positron emitters to studies on plants

    Energy Technology Data Exchange (ETDEWEB)

    Ishioka, N.S.; Matsuoka, H. [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Sekine, T. [and others

    1998-10-01

    A newly developed positron emitting tracer imaging system enables us to study dynamically the physiological function of plants, although this system covers, at present, a limited area in a plant. Production of the positron emitters {sup 11}C, {sup 13}N, {sup 18}F and {sup 48}V for this application, using an AVF cyclotron, is described. (author)

  20. The application of iterative equalisation to high data rate wireless personal area networks

    OpenAIRE

    Lillie, AG; Nix, AR; Fletcher, PN; McGeehan, JP

    2002-01-01

    There is increasing demand for broadband wireless personal area networking devices, mainly fuelled by mobile multimedia applications such as wireless home networks. This paper investigates the suitability of iterative equalisation as a means of achieving low bit and packet error rates in a future high data rate personal area network standard. Baseband simulation results demonstrate the powerful ISI mitigation and error correcting performance of such receivers when operating in representative ...

  1. Wireless Body Area Networks and Its Emerging Technologies in Real Time Applications

    OpenAIRE

    Esther Evangelin; Dahlia Sam

    2014-01-01

    With the rapid improvement of wireless communication and semiconductor technologies, the body area sensor network (BASN) is fast developing. The BASN which is also referred to as the WBAN (Wireless Body Area Network), is widely used in medical applications and comprises of Body Sensors attached to human body. These body sensors will help to monitor the interior functions of the body. The data generated by the sensors is transmitted via the internet and collected in external se...

  2. 徐州市城区常绿阔叶树种及其应用调查研究%Investigation and Study of Evergreen Broadleaved Trees Species and Their Landscape Application in Urban Area of Xuzhou

    Institute of Scientific and Technical Information of China (English)

    卢芳; 周瑞玲

    2012-01-01

    The state of the evergreen broadleaved tree species was investigated.The result showed that there are 43 species of evergreen broadleaved species from 32 genera and 22 families in urban gardens and parks of Xuzhou.Their application mainly takes the form of street trees,landscaping trees,basic tree planting,green hedge and land virescence.The present situation of evergreen broadleaved species was analyzed.%对徐州市城区常绿阔叶树种资源现状进行了实地调查。结果表明,在徐州城区园林中应用的能够露地越冬的常绿阔叶树种共计约43种,隶属于22科、32属,应用形式主要有行道树、园景树、基础种植、绿篱、地被。文中还分析了徐州市常绿阔叶树种应用现状。

  3. Wastewater Land Application Permit LA-000141 Renewal Information for the Central Facilities Area Sewage Treatment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Laboratory, Idaho National

    1999-02-01

    On July 25, 1994, the State ofldaho Division of Environmental Quality (DEQ) issued a Wastewater Land Application Permit (WLAP) for the Idaho National Engineering Laboratory's (INEL, now the Idaho National Engineering and Environmental Laboratory [INEEL]) Central Facilities Area (CFA) Sewage Treatment Plant (STP). The permit expires August 7, 1999. In addition to the renewal application, this report was prepared to provide the following information as requested by DEQ.

  4. Material Development for Tooling Applications Using Big Area Additive Manufacturing (BAAM)

    Energy Technology Data Exchange (ETDEWEB)

    Duty, Chad E [ORNL; Drye, Tom [Techmer Engineering Solutions (ES); Franc, Alan [Techmer Engineering Solutions (ES)

    2015-03-01

    Techmer Engineered Solutions (TES) is working with Oak Ridge National Laboratory (ORNL) to develop materials and evaluate their use for ORNL s recently developed Big Area Additive Manufacturing (BAAM) system for tooling applications. The first phase of the project established the performance of some commercially available polymer compositions deposited with the BAAM system. Carbon fiber reinforced ABS demonstrated a tensile strength of nearly 10 ksi, which is sufficient for a number of low temperature tooling applications.

  5. Identifying hydrologically sensitive areas using LiDAR DEMs to mitigate critical source areas of diffuse pollution: development and application

    Science.gov (United States)

    Thomas, Ian; Jordan, Phil; Mellander, Per-Erik; Fenton, Owen; Shine, Oliver; hUallacháin, Daire Ó.; Creamer, Rachel; McDonald, Noeleen; Dunlop, Paul; Murphy, Paul

    2016-04-01

    Identifying critical source areas (CSAs) of diffuse pollution in agricultural catchments requires the accurate identification of hydrologically sensitive areas (HSAs) at highest propensity for generating surface runoff and transporting pollutants such as phosphorus (P). A new GIS-based HSA Index is presented that identifies HSAs at the sub-field scale. It uses a soil topographic index (STI) and accounts for the hydrological disconnection of overland flow via topographic impediment from flow sinks such as hedgerows and depressions. High resolution (0.25-2 m) LiDAR Digital Elevation Models (DEMs) are utilised to capture these microtopographic controls on flow pathways and hydrological connectivity. The HSA Index was applied to four agricultural catchments (~7.5-12 km2) with contrasting topography and soil types. Catchment HSA sizes were estimated using high resolution rainfall-quickflow measurements during saturated winter storm events in 2009-2014, and mapped using the HSA Index. HSA sizes ranged from 1.6-3.4% of the catchment area during median storm events and 2.9-8.5% during upper quartile events depending on whether well or poorly drained soils dominated, which validated HSA Index value distributions. Total flow sink volume capacities ranged from 8,298-59,584 m3 and caused 8.5-24.2% of overland-flow-generating-areas and 16.8-33.4% of catchment areas to become hydrologically disconnected from the open drainage channel network. HSA maps identified 'delivery points' along surface runoff pathways where transported pollutants such as P are delivered to the open drainage network. Using these as proposed locations for targeting mitigation measures such as riparian buffer strips (RBS) reduced costs compared to blanket implementation within an example agri-environment scheme by 66% and 91% over 1 and 5 years respectively, which included LiDAR DEM acquisition costs. Considering that HSAs are often the dominant P CSA factor in agricultural catchments and can override

  6. Application of a Database in the Monitoring of Workstations in a Local Area Network

    Directory of Open Access Journals (Sweden)

    Eyo O. Ukem

    2009-01-01

    Full Text Available Problem statement: Computer hardware fault management and repairs can be a big challenge, especially if the number of staff available for the job is small. The task becomes more complicated if remote sites are managed and an engineer or technician has to be dispatched. Approach: Availability of relevant information when needed could ease the burden of maintenance by removing uncertainties. Such required information could be accumulated in a database and accessed as needed. Results: This study considered such a database, to assist a third party hardware maintenance firm keep track of its operations, including the machines that it services, together with their owners. A software application was developed in Java programming language, in the form of a database, using Microsoft Access as the database management system. It was designed to run on a local area network and to allow remote workstations to log on to a central computer in a client/server configuration. With this application it was possible to enter fault reports into the database residing on the central computer from any workstation on the network. Conclusion/Recommendations: The information generated from this data can be used by the third party hardware maintenance firm to speed up its service delivery, thus putting the firm in a position to render more responsive and efficient service to the customers.

  7. 100 Area Source Operable Unit focused feasibility study. Volume 2

    International Nuclear Information System (INIS)

    This 100-KR-1 Operable Unit Focused Feasibility Study (FFS) is prepared in support of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigation/feasibility study (RI/FS) process for the 100 Areas. This 100-KR-1 FFS, evaluates the remedial alternatives for interim action at high-priority waste sites within the 100-KR-1 Operable Unit, and provides the information needed for the timely selection of the most appropriate interim action at each waste site. The FFS process for the 100 Areas is conducted in two stages: an evaluation of remedial alternatives for waste-site groups and an evaluation of the remedial alternatives for individual waste sites. Whenever the characteristics of the individual waste-sites are sufficiently similar to the characteristics of the waste-site groups, the evaluation of alternatives in the Process Document is used. This approach, referred to as the ''plug-in'' approach, is used because there are many waste sites within the 100 Areas that are similar to each other

  8. Analysis of Land Deformation on Slope Area using PS InSAR. Case Study: Malang Area

    International Nuclear Information System (INIS)

    The geographical position of Indonesia located between two continents and oceans is strategic, but at large risk of experiencing various disasters. Climate change and vulnerable location (surrounded by plates and geological faults in the Earth's crust) creates an earthquake-prone region and causes land/mudslides. In this paper, PS InSAR method (Persistent Scatterer Interferometric Synthetic Aperture Radar) is implemented to Phased Array type L-band Synthetic Aperture Radar (PALSAR) data to study the potential damage caused by the earthquake or volcanic eruption in Malang vicinity. By comparing the amplitude images periodically, shifting soil can be determined using precise orbital information. The analysis showed a significant decrease of land deformation on slope area in Klojen district in Malang city, reached up to −7.128 mm/year

  9. Human genetics studies in areas of high natural radiation.IV. Research in radioactive areas

    International Nuclear Information System (INIS)

    A review is made on researches performed in areas with high levels of natural radioactivity. Some considerations are made on the importance and difficulties involved in projects of this kind. Although there is no doubt that natural radioactivity is one of the causes of the so-called spontaneous mutations, the practical demonstration of this assertion is extremely complex. Projects trying to correlate high levels of natural radioactivity with the occurrence of cancer (in general, or specific), leukemia, congenital malformations (in general or specific), neuro-vegetative disturbs, sex ratio, mortality, and physical development, as well as other characteristics. Some researches with animals are also mentioned, and references are given for plant studies. A critical analysis is made of some works relating to human populations

  10. Studies on wind environment around high buildings in urban areas

    Institute of Scientific and Technical Information of China (English)

    LIU; Huizhi; JIANG; Yujun; LIANG; Bin; ZHU; Fengrong; ZHAN

    2005-01-01

    High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.

  11. Study on Seismicity of Sino-Mongolia Arc Areas

    Science.gov (United States)

    Xu, Guangyin; Wang, Suyun

    2016-04-01

    Using the earthquake catalogue from China, Mongolia and the global catalogue, the uniform catalogue of North China, Mongolia and adjacent areas, which is within the region 80-130°E, 40-55°N, has been established by Institute of Geophysics, China Earthquake Administration and Research Center of Astronomy and Geophysics, Mongolian Academy of Science for the seismic hazard analysis and seismic zoning map of Mongolia according to the following principles. 1) Earthquakes, which just exist in one catalogue, need to be verified further. If the earthquakes occurred in the country where the catalog comes from, then they will be adopted. If not, it should be checked with other more data. 2) The events that come from the three data sources have be checked and verified as followings. (1) The parameters of earthquakes that occurred in China will be taken from China catalog. (2)The parameters of earthquakes that occurred in Mongolia will be taken from Mongolia catalog. (3) The parameters of earthquakes that occurred in the adjacent areas will be taken from the global catalog by Song et al. According to the uniform catalogue, the seismicity of the North China, Mongolia and adjacent areas is analyzed, and the conclusions as followings are made. 1) The epicenter map can be roughly divided into two parts, bounded by the longitude line 105°E , in accordance with the "North-South Seismic Belt" of China. The seismicity is in a high level with many strong earthquakes in the west and is in a low level with little strong events in the east. 2) Most earthquakes are shallow-focus events, but there are also several middle or deep-focus events in the study area. 3) Earthquakes with magnitude greater than 5 are basically complete since 1450 A.D., and the seismicity of the study areas is in a high level since 1700 A. 4) Two seismic belts, Altay seismic belt and Bolnay-Baikal seismic belt, are determined according to the epicenters and tectonics. 5) The b-values of magnitude - frequency

  12. On epidemiological studies of high background radiation areas

    International Nuclear Information System (INIS)

    Until recently, the epidemiological studies of high background radiation areas (HBRA) have 'received relatively little attention', and sometimes even ignored, e.g. UNSCEAR omitted the studies in Kerala from a table of epidemiological studies of radiation and cancer. Authoritative reports on the effects from ionizing radiation such as those from the National Research Council, UNSCEAR, and ICRP instead rely on other sources of information - most notably the A-bomb survivor cohort, medically irradiated cohorts, cohorts of miners exposed to high levels of radon, and the residential radon case-control studies. No doubt this is because HBRA studies typically have had relatively large potential for bias and confounding, low statistical power, and limitations relating to dosimetry. However, great efforts have been made recently to improve HBRA studies, particularly in Kerala and the Yuangjiang area of China. It is anticipated that some of these studies may be able to provide important direct information on health effects from chronic low-dose radiation exposures, a primary concern for radiation protection. In fact, the width of 90% confidence intervals for ERR/Gy reported for incidence from the Kerala study (-0.58, 0.46), and mortality in Yangjiang (-0.67, 0.69), is already comparable to that for some prominent studies of low-dose rate health effects such as of incidence in the Techa River Cohort (0.3, 1.9) and of mortality in the 15-Country Nuclear Workers Study (0.27, 1.80). However, it should be stressed that these intervals do not account for non-sampling sources of uncertainty such as errors in dosimetry and residual confounding. This presentation will focus on ways to further improve HBRA studies around the world, with particular emphasis on the ones in India and China. This will include ways to increase statistical power - such as ways to combine information from different HBRA studies, and possible extensions of the studies such as those designed to better

  13. Smart City, Metropolitan Areas and Competitiveness: the Case Study of Florence

    Directory of Open Access Journals (Sweden)

    Carmela Gargiulo

    2015-07-01

    Full Text Available In several urban contexts, the definition of a new development process is arising and it is focused on the use and the application of new technologies in different areas of the urban system. Such new development process is aimed at increasing life quality and local communities wellness and at promoting the creation of a more efficient and more sustainable urban system, as well as at making it more competitive. The issue of the reorganization of metropolitan areas is combined with such process, following the recent approval of the Delrio Law that establishes the Metropolitan City in Italy, as government authority of the metropolitan areas. Smart City, Metropolitan Areas and Competitiveness are the three topics of this paper, which aim is the description of the most innovative politics and initiatives adopted in the Metropolitan City of Florence that is proposed as a case study where such topics are combined.

  14. Sera radiosterilization: studies and applications

    International Nuclear Information System (INIS)

    The application of ionizing radiation for sterilization of animal serum increased rapidly over the last few years, due to the fact that most radiation-resistant living organisms (fungi, bacteria, viruses, etc.) can be readily inactivated without damage to the serum. The quality of sera sterilized by ionizing radiation has been investigated. Radiosterilization was carried out in the frozen state at doses between 25 and 50 kGy. The source of gamma radiation was cobalt 60. To demonstrate that serum proteins did not suffer alterations during the process of irradiation, SDS-PAGE, electrofocusing and non equilibrium pH gradient electrophoresis of the sera were carried out before and after irradiation. The biological efficiency of the irradiated sera was demonstrated by growth curves of several cell lines in cell cultures supplemented with it. The results demonstrated that radiosterilization is a simple and effective method for sera. (author)

  15. Small Unmanned Aerial Vehicles in coastal areas: lessons learned from applications in Liguria, NW Mediterranean.

    Science.gov (United States)

    Rovere, A.; Casella, E.; Pedroncini, A.; Mucerino, L.; Casella, M.; Cusati, L. A.; Vacchi, M.; Ferrari, M.; Firpo, M.

    2014-12-01

    In 2013 we started to apply small UAVs to the study of coastal areas in Liguria, NW Mediterranean Sea. In this region monitoring coastal evolution and the impact of sea storms is a primary administrative need, as a large part of the economic income derives from summer tourism. In two years, we accumulated almost 200 hours of flight with two different UAVs, a professional-grade Mikrokopter Okto and a consumer-grade Phantom DJI. We used photogrammetric and orthorectification techniques to obtain Digital Elevation Models (DEMs) and orthophotos of different beaches in the region. Data from UAVs allowed us to answer several questions. What is the accuracy of DEMs obtained from UAVs in low-relief areas such as beaches? What are the problems encountered in the photogrammetric procedure near the shoreline? Are the results obtained with consumer-grade UAVs comparable to those obtained with professional-grade ones? Aside from these technical questions, we used the data obtained from UAVs for different local studies aimed at giving management tools to the local administrations. We used the cloudpoint obtained from DEMs and the orthophotos to set up a runup modelling chain, to detect short-term changes in the coastal zone, and to give a first estimate of the debris deposited on the beach after a major storm. As stated by Watts et al., 2012 (Remote Sensing 4, 1671-1692) the application of Unmanned Aerial Vehicles and photogrammetry techniques in earth sciences is flourishing, and has the potential to revolutionize the study of geomorphology. Surely, UAVs opened new research perspectives for our group, which has been actively working on coastal changes in Liguria for almost 25 years.

  16. Conceptual basis for an integrated system for the management of a protected area. Examples from its application in a mediterranean area.

    Science.gov (United States)

    Cornejo, E; Fungairiño, S G; Barandica, J M; Serrano, J M; Zorrilla, J M; Gómez, T; Zapata, F J; Acosta, F J

    2016-01-15

    Improving the efficiency of management in protected areas is imperative in a generalized context of limited conservation budgets. However, this is overlooked due to flaws in problem definition, general disregard for cost information, and a lack of suitable tools for measuring costs and management quality. This study describes an innovative methodological framework, implemented in the web application SIGEIN, focused on maximizing the quality of management against its costs, establishing an explicit justification for any decision. The tool integrates, with this aim, a procedure for prioritizing management objects according to a conservation value, modified by a functional criterion; a project management module; and a module for management of continuous assessment. This appraisal associates the relevance of the conservation targets, the efficacy of the methods employed, both resource and personnel investments, and the resulting costs. Preliminary results of a prototypical SIGEIN application on the Site of Community Importance Chafarinas Islands are included. PMID:26513322

  17. Mobile TLS application for fluvial studies

    Science.gov (United States)

    Alho, P.; Kukko, A.; Hyyppä, H.; Kaartinen, H.; Hyyppä, J.; Jaakkola, A.

    2009-04-01

    In fluvial studies, different survey and modelling approaches have been used to study the interaction of landscape and flow processes, including response thresholds, feedback elements and other such complexities, requiring both high-quality topographical and bathymetrical data at different scales. Currently, tachymetry and GPS surveys are widely used in fluvial geomorphology, while more sophisticated survey methods such as close-range photogrammetry and terrestrial laser scanning (TLS) are less common. Static TLS measurements provide a point density, ranging from 100-10000 points/m2 with a root mean square error of ±2 to ±25 mm. Although the TLS system allows the collection of data at a higher resolution and precision than ALS at a lower cost, its area is more limited than the latter method. This area limitation can be improved using mobile laser scanning. The typical requirements for a mobile mapping system (MMS) are that visible objects should be measured to an accuracy of a few centimetres with a maximum speed of 50-60 km h-1 and that desired objects should be collected within a radius of several tens of metres. Recently, it has been reported mobile mapping systems, which are based on laser scanning, the former work including an account of the FGI ROAMER system and a detailed description of its data processing. The boat-based, mobile mapping system (BoMMS, based on FGI ROAMER system) with a laser scanner for fluvial applications allows the derivation of detailed topographical data in river studies. Combined with data acquisition from static terrestrial laser scanning (TLS), boat-based laser scanning enables a totally new field mapping approach for fluvial studies. In this paper, we demonstrate a BoMMS with a laser scanner for fluvial applications. This system enables rapid field surveying with accuracy of approximately 2 cm (relatively sub-centimetre) for river banks, point-bars and other features of the riverine landscape. This application offers a highly

  18. Application of super safe small and simple reactor for nuclear desalination in the desertification area

    International Nuclear Information System (INIS)

    This paper presents the application of Super Safe, Small and Simple Liquid metal cooled reactor (4S LMR) for nuclear desalination in desertified area. The authors describe sea water desalination with a reverse osmosis process and the power generation facilities needed for that. (TEC). 2 tabs., 4 refs., 7 figs

  19. Optical local area networks: new solutions for fiber-to-the-desk applications

    OpenAIRE

    Radovanovic, Igor

    2003-01-01

    In this thesis we introduce optical local area networks for fiber-to-the-desk application. This in an attempt to bring the optical fiber ever closer to the individual user offering a huge information transmission bandwidth that will undoubtedly have a strong impact on future societies.

  20. Application of local area networks to accelerator control systems at the Stanford Linear Accelerator

    International Nuclear Information System (INIS)

    The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control system, computer networks and accelerator operations

  1. Application of local area networks to accelerator control systems at the Stanford Linear Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J.D.; Linstadt, E.; Melen, R.

    1983-03-01

    The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control system, computer networks and accelerator operations.

  2. F- and H-Area Sewage Sludge Application Sites groundwater monitoring report

    International Nuclear Information System (INIS)

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. During fourth quarter 1992, the FSS wells also were analyzed for a number of other constituents not required by the permit. Historically and currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites except iron, lead, and manganese, which occur in elevated concentrations frequently in FSS wells. Lead concentrations exceeded the final Primary Drinking Water Standards during fourth quarter 1992, an event that is concurrent with a change in sampling procedures. Tritium is the primary nonpermit constituent that exceeds standards at the F-Area Sewage Sludge Application Site. Other constituents also exceed standards at this site but only sporadically

  3. Study of stress in nuclear area workers: silent enemy

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Maria da Penha Sanches; Vanni, Silvia Regina [Centro Tecnologico da Marinha (CTMSP-SP), SP (Brazil); Andrade, Delvonei Alves de; Sabundjian, Gaiane, E-mail: delvonei@ipen.b, E-mail: gdjian@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The nuclear accidents occurred in Three Mile Island, Chernobyl and Fukushima were influenced by human factors. The objective of this paper is to study about the factors that influence the level of stress of the nuclear area workers. The paper is based on theoretical assumptions on occupational stress and its manifestations. The methodology used is based on questionnaires and interviews, obtained from Martins' work published in 2008 about the study of human factors focused on research reactor operators IEA-R1, of the Instituto de Pesquisas Energeticas e Nucleares (IPEN). In that study were analyzed the accidents occurred by human failure. The results presented in this paper showed some improvements in the reactors operators' work, and health. Operational reliability and facilities safety also improved. (author)

  4. Study of stress in nuclear area workers: silent enemy

    International Nuclear Information System (INIS)

    The nuclear accidents occurred in Three Mile Island, Chernobyl and Fukushima were influenced by human factors. The objective of this paper is to study about the factors that influence the level of stress of the nuclear area workers. The paper is based on theoretical assumptions on occupational stress and its manifestations. The methodology used is based on questionnaires and interviews, obtained from Martins' work published in 2008 about the study of human factors focused on research reactor operators IEA-R1, of the Instituto de Pesquisas Energeticas e Nucleares (IPEN). In that study were analyzed the accidents occurred by human failure. The results presented in this paper showed some improvements in the reactors operators' work, and health. Operational reliability and facilities safety also improved. (author)

  5. Small Glacier Area Studies: A New Approach for Turkey

    Science.gov (United States)

    Yavasli, Dogukan D.; Tucker, Compton J.

    2012-01-01

    Many regions of Earth have glaciers that have been neglected for study because they are small. We report on a new approach to overcome the problem of studying small glaciers, using Turkey as an example. Prior to our study, no reliable estimates of Turkish glaciers existed because of a lack of systematic mapping, difficulty in using Landsat data collected before 1982, snowpack vs. glacier ice differentiation using existing satellite data and aerial photography, the previous high cost of Landsat images, and a lack of high-resolution imagery of small Turkish glaciers. Since 2008, a large number of glaciers from the 1970s to 2007-2011. Multiple Landsat images, primarily Thematic Mapper (TM) data from 1984 to 2011, enabled us to minimize differentiation problems between snow and glacier ice, a potential source of error. In addition, we used Ikonos, Quickbird, and World View-1 & -2 very high-resolution imagery to evaluate our TM accuracies and determine the area of nine smaller glaciers in Turkey. We also used five Landsat-3 Return Beam Videcon (RBV) 30 m pixel resolution images, all from 1980, for six glaciers. The total area of Turkish glaciers decreased from 23 km2 in the 1970s to 10.1 km2 in 2007-2011. By 2007-2011, six Turkish glaciers disappeared, four were glaciers from the 1970s to 2006-2011.

  6. Visual aesthetics study: Gibson Dome area, Paradox Basin, Utah

    International Nuclear Information System (INIS)

    The Visual Aesthetics study was performed as an initial assessment of concerns regarding impacts to visual resources that might be associated with the construction of a geologic nuclear waste repository and associated rail routes in the Gibson Dome location of southeastern Utah. Potential impacts to visual resources were evaluated by predicting visibility of the facility and railway routes using the US Forest Service (USFS) computer program, VIEWIT, and by applying the Bureau of Land Management (BLM) Visual Resource Management (VRM) methodology. Five proposed facility sites in the Gibson Dome area and three proposed railway routes were evaluated for visual impact. 10 references, 19 figures, 5 tables

  7. An Overview of Applications, Standards and Challenges in Futuristic Wireless Body Area Networks

    Directory of Open Access Journals (Sweden)

    Ragesh G K

    2012-01-01

    Full Text Available Recent technical advancements in low-power integrated circuits, ultra low-power RF (radio frequency technology, wireless communications and micro sensors allowed the realization of Wireless Body Area Networks (WBANs. It is one of the latest technologies in health care diagnosis and management. A body area network wirelessly connects independent nodes (e.g. medical devices, earphones, sensors, actuators attached to the body surface, implanted into tissues/body, or dispersed in the clothing for applications in home/health care, sports, entertainment, defense, ambient intelligence, pervasive computing and many other areas. These sensors offer promising applications in areas such as real time health monitoring, interactive gaming and consumer electronics. WBAN does not compel the patient to stay in the hospital thereby giving much physical mobility. Thus it greatly increases the efficiency of a health care system. This paper presents an overview on the various aspects of WBAN including sensors used, applications, power efficiency, communication protocols, security requirements, existing projects in WBANs and challenges faced in wireless body area networks.

  8. Study on Application of Natural Ventilation in Highway Tunnels in Urban Areas%自然通风在城市道路隧道中的应用研究

    Institute of Scientific and Technical Information of China (English)

    陈玉远; 甘甜

    2012-01-01

    The design of the operation ventilation of a highway tunnel in Kunming is studied in the paper. Ventilation so- lutions with/without natural ventilation intakes are presented, and in the end, natural ventilation solution is adopted for the tunnel. The operation ventilation of the tunnel with natural ventilation intakes, as well as the diffusing range of the pollutants at the tunnel portal are studied by means of SES4.1 and CFD simulation software, and the environment is e- valuated. The results show that the emission and diffusing of pollutants at the tunnel portals can be brought under effective control if natural ventilation intakes are installed on the top of the tunnel and decentralized emission mode is adopted.%为解决城市道路隧道的污染物排放问题,以昆明东外环中路隧道为例,介绍了自然通风在城市道路隧道通风系统中的应用。采用SES4.1模拟软件对有自然通风口时隧道运营通风进行了计算,并采用CFD模拟软件对洞口污染物扩散范围进行了研究。结果表明,在隧道顶部设自然通风口,采用分散排污方式,可减少隧道洞口污染物排放总量,降低洞口污染物扩散范围和通风系统运行费用。该应用成功解决了隧道洞口污染物集中排放对周边环境的影响,为今后类似工程的设计提供了新的思路。

  9. 100 Area groundwater biodenitrification bench-scale treatability study procedures

    Energy Technology Data Exchange (ETDEWEB)

    Peyton, B.M.; Martin, K.R.

    1993-05-01

    This document describes the methodologies and procedures for conducting the bench-scale biodenitrification treatability tests at Pacific Northwest Laboratory{sup a} (PNL). Biodenitrification is the biological conversion of nitrate and nitrite to gaseous nitrogen. The tests will use statistically designed batch studies to determine if biodenitrification can reduce residual nitrate concentrations to 45 mg/L, the current maximum contaminant level (MCL). These tests will be carried out in anaerobic flasks with a carbon source added to demonstrate nitrate removal. At the pilot scale, an incremental amount of additional carbon will be required to remove the small amount of oxygen present in the incoming groundwater. These tests will be conducted under the guidance of Westinghouse Hanford Company (WHC) and the 100-HR-3 Groundwater Treatability Test Plan (DOE/RL-92-73) and the Treatability Study Program Plan (DOE/RL-92-48) using groundwater from 100-HR-3. In addition to the procedures, requirements for safety, quality assurance, reporting, and schedule are given. Appendices include analytical procedures, a Quality Assurance Project Plan, a Health and Safety Plan, and Applicable Material Data Safety Sheets. The procedures contained herein are designed specifically for the 100-HR-3 Groundwater Treatability Test Plan, and while the author believes that the methods described herein are scientifically valid, the procedures should not be construed or mistaken to be generally applicable to any other treatability study.

  10. The fusion applications study: FAME (Fusion Applications and Market Evaluation)

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.R.

    1986-01-01

    In recent years, the fusion program has made a great deal of progress on the understanding of plasma physics. The primary mission of the fusion program in the past has been the generation of central station electricity. The demand for electricity, however, has slackened in recent years, fossil fuel prices are low, and the need to develop an assured, economical, long-term energy supply for the United States is no longer perceived as an immediate need. Fusion has the potential for a wide variety of nonelectric application including the breeding of fissile fuels and tritium, production of hydrogen and other chemical products, transmutation or burning of various nuclear and chemical products, transmutation or burning of various nuclear and chemical wastes, generation of process heat, production of many useful radioisotopes, radiation processing of materials, medical diagnosis and treatment, and space power and propulsion. To understand the many possible applications of fusion, GA Technologies has begun a fusion applications study for the U.S. Department of Energy's Office of Fusion Energy (DOE OFE) called FAME for Fusion Applications and Market Evaluation. The objective of this project is to investigate, evaluate, and summarize the potential applications of fusion energy, and to identify promising directions for future work on fusion applications. This study includes a broad survey of the possible uses of fusion and the products that could be obtained from a fusion reactor. The potential markets for these products are being assessed. 1 ref.

  11. AN ANALYSIS OF FACTORS AFFECTING UNDERSTANDING AND APPLICATIONS OF BRANDED HOUSING PROJECT MARKETING AROUND THE ISTANBUL METROPOLITAN AREA

    OpenAIRE

    Polat, Selcuk; FERMAN, Murat

    2015-01-01

    Marketing is a quite crucial topic for success in the current competitive environment. Efficient and effective marketing practices will allow the companies to grow and to be more successful. Companies can gain competitive advantage by developing various marketing strategies. The objective of this study is to research the factors affecting the understanding and applications of ‘branded housing project marketing’ around the Istanbul metropolitan area. Branding and market positioning depend on f...

  12. Integrated geophysical studies of Baryatino magnetic anomaly area

    International Nuclear Information System (INIS)

    Complete text of publication follows. Baryatino magnetic anomaly is situated in the central part of the East-European craton, approximately 300 km to the south-west from Moscow. It is caused by ferrous quartzite bodies, occurring within the metamorphic basement. The basement is covered by sedimentary complex with total thickness of 500 m and more, which makes mining of iron ore impractical. However, studies of Baryatino area can provide information about the internal structure of the Archean-Proterozoic basement, which is still poorly understood. In 1992 a geophysical training ground for students of Moscow State University and other universities was established in Alexandrovka village, close to Baryatino area (Khmelevskoy et al., 1999). Since then electromagnetic, electrical, magnetic and gravity measurements are performed in the region. Besides, geological and geophysical information, previously obtained in the area, was collected and analyzed (for example, first magnetic exploration was performed here in 1934). The key method of deep investigations is magnetotellurics (MT). More than a hundred of MT soundings were performed in the region. They allowed to trace the top of metamorphic basement and revealed a conductive anomaly in the consolidated crust. Presumably, it is a northern continuation of Kirovograd crustal anomaly, traced from the Black sea to the North of the Ukraine. Currently, MT soundings are performed in the area between Ukraine and Baryatino anomaly to verify this hypothesis (Varentsov et al., 2008). Controlled-source electromagnetic and electrical methods were applied to study the sedimentary cover. In the lower part there is a conductive Devonian complex, consisting of terrigenous rocks, saturated by high-mineralized water. Above there is a resistive, mainly carbonate Carboniferous complex. Near-surface rocks are conductive quaternary moraine sediments, formed during the ice age. Magnetic and gravity and measurements along several profiles

  13. Application of Characteristics of Seismogenic Structures in the Determination of Parameter of Potential Seismic Source Areas

    Institute of Scientific and Technical Information of China (English)

    Zhou Bengang

    2005-01-01

    The characteristics of seismogenic structures are an important basis for delineating the potential seismic source areas and determining the annual occurrence rate of earthquakes. The potential seismic source area does not only have the intension that "this area has the possibility for destructive earthquakes to occur in the future" but also means that earthquakes of high magnitude interval have the characteristics of similar recurrence. When determining the seismic activity parameters of a statistical unit, some active tectonic blocks in the unit may have different background earthquakes. In order to better reflect the heterogeneity in space of seismic activities, it is necessary to divide the potential seismic source areas into three orders.By analyzing the recurrence characteristics of earthquakes of high magnitude interval in the potential source area and calculating the occurrence probability of earthquakes of high magnitude interval in the potential seismic source area in the time window for prediction, the average annual occurrence rate of earthquakes can be obtained by the method of probability equivalent conversion in the time window for prediction. This would be helpful for considering the recurrence characteristics of strong earthquakes in potential source areas within the framework of seismic risk analysis of China. Besides, the insufficient frequency of characteristic earthquakes of the next high magnitude interval in the potential source area and the heterogeneity of strong earthquakes on seismogenic structures are analyzed to see their application in seismic risk analysis.

  14. Synthesis and Applications of Large Area Graphene-Based Electrode Systems

    Science.gov (United States)

    Paul, Rajat Kanti

    Graphene is a single sheet of carbon atoms with outstanding electrical and physical properties and being exploited for applications in electronics, sensors, fuel cells, photovoltaics and energy storage. However, practical designs of graphene-based electrode systems and related experimental implementations are required to realize their widespread applications in nano- to bioelectronics. In this dissertation, different graphene-based electrode systems having metallic and semiconducting properties are synthesized optimizing process conditions. Also realized is the potential of the fabricated electrode systems by applying them in practical applications such as sensor devices and fuel cells. The zero bandgap of semimetal graphene still limits its application as an effective field-effect transistor device or a chemiresistor sensor operating at room temperature. It has been shown theoretically and experimentally that graphene nanoribbons (GNRs) or nanomeshes (GNMs) can attain a bandgap that is large enough for a transistor device, and hence would show high sensitivity to various gaseous species or biomolecules. Large-area mono- and bilayer graphene films are synthesized by a simple chemical vapor deposition (CVD) technique depending on the carbon precursors such as methane, acetylene and ethanol, and the results are compared using optical microscopy (OM), Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM) and x-ray photoelectron spectroscopy (XPS). A simple reactive ion etching (RIE) combined with well-established nanosphere lithography is performed on the synthesized CVD-grown monolayer graphene platform to fabricate large area GNMs with specific dimension and periodicity. The fabricated GNMs chemiresistor sensor devices show excellent sensitivity towards NO2 and NH 3, significantly higher than their film counterparts. The GNM sensor devices exhibit sensitivities of about 4.32%/ppm (parts-per-million) in NO 2 and 0.71%/ppm in NH3 with estimated

  15. Microscopic studies of uranium mineralization at Mentawa Area, Central Kalimantan

    International Nuclear Information System (INIS)

    In Mentawa areas there are indications that the U mineralization associated with tourmaline, quartz, sulfide minerals that fill the fracture aperture, on the rocks meta silt, and fill it with the direction of WNW - ESE, the thickness milli metric - centi metric with radioactivity 500-15000 c/s SPP 2 NF. The purpose of this study is to know the characters. para geneses and the process of formation of uranium minerals. The method used by microscopic observation of several examples of thin sections and polished sections of the previous research results. The study shows that uranium minerals are uraninite, associated with molybdenite, magnetite, rutile, ilmenite, pyrite, pyrrhotite, tourmaline, garnet, quartz and mineral pitchblende associated with arsenopyrite, hematite, chalcopyrite, pyrite, pyrrhotite, tourmaline, quartz till in cracks in rocks biotite and biotite schist. Mineral associations indicate that the process of formation of uranium mineralization occurs in three phases: pegmatites pneumatolitic, and hydrothermal alteration. (author)

  16. Urban Groundwater Mapping - Bucharest City Area Case Study

    Science.gov (United States)

    Gaitanaru, Dragos; Radu Gogu, Constantin; Bica, Ioan; Anghel, Leonard; Amine Boukhemacha, Mohamed; Ionita, Angela

    2013-04-01

    Urban Groundwater Mapping (UGM) is a generic term for a collection of procedures and techniques used to create targeted cartographic representation of the groundwater related aspects in urban areas. The urban environment alters the physical and chemical characteristics of the underneath aquifers. The scale of the pressure is controlled by the urban development in time and space. To have a clear image on the spatial and temporal distribution of different groundwater- urban structures interaction we need a set of thematic maps is needed. In the present study it is described the methodological approach used to obtain a reliable cartographic product for Bucharest City area. The first step in the current study was to identify the groundwater related problems and aspects (changes in the groundwater table, infiltration and seepage from and to the city sewer network, contamination spread to all three aquifers systems located in quaternary sedimentary formations, dewatering impact for large underground structures, management and political drawbacks). The second step was data collection and validation. In urban areas there is a big spectrum of data providers related to groundwater. Due to the fact that data is produced and distributed by different types of organizations (national agencies, private companies, municipal water regulator, etc) the validation and cross check process is mandatory. The data is stored and managed by a geospatial database. The design of the database follows an object-orientated paradigm and is easily extensible. The third step consists of a set of procedures based on a multi criteria assessment that creates the specific setup for the thematic maps. The assessment is based on the following criteria: (1) scale effect , (2) time , (3) vertical distribution and (4) type of the groundwater related problem. The final step is the cartographic representation. In this final step the urban groundwater maps are created. All the methodological steps are doubled

  17. Recreational Areas, This would include state natural areas, parks (public & private) and campgrounds., Published in 2012, Not Applicable scale, Chippewa County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Recreational Areas dataset, published at Not Applicable scale, was produced all or in part from Field Survey/GPS information as of 2012. It is described as...

  18. Cogeneration feasibility study in the Gulf States Utilities service area

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Sites in the Gulf States Utilities service are considered for cogeneration feasibility studies. The sources of steam considered for the Orange, Texas and Geismar, Lake Charles, and North Baton Rouge, Louisiana sites include oil, coal, HTGR steamers, consolidated nuclear steam system, atmospheric fluidized-bed coal combustion, and coal gasification. Concepts concerning cogeneration fuel systems were categorized by technical applicability as: current technology (pulverized coal-fired boilers and fuel oil-fired boilers), advanced technology under development (HTGR steamers and the CNSS), and advanced technology for future development (atmospheric fluidized-bed boilers and coal gasification). In addition to providing data on cogeneration plant generally useful in the US, the study determined the technical and economic feasibility of steam and electric power cogeneration using coal and nuclear fuels for localized industrial complexes. Details on site selection, plant descriptions, cost estimates, economic analysis, and plant schedule and implementation. (MCW)

  19. Submicron area NbN/MgO/NbN tunnel junctions for SIS mixer applications

    Science.gov (United States)

    Leduc, H. G.; Judas, A.; Cypher, S. R.; Bumble, B.; Hunt, B. D.

    1991-01-01

    The development of submicron area mixer elements for operation in the submillimeter wave range is discussed. High-current-density NbN/MgO/NbN tunnel junctions with areas down to 0.1 sq microns have been fabricated in both planar and edge geometries. The planar junctions were fabricated from in situ deposited trilayers using electron-beam lithography to pattern submicron area mesas. Modifications of fabrication techniques used in larger-area NbN tunnel junctions are required and are discussed. The NbN/MgO/NbN edge junction process using sapphire substrates has been transferred to technologically important quartz substrates using MgO buffer layers to minimize substrate interactions. The two junction geometries are compared and contrasted in the context of submillimeter wave mixer applications.

  20. Quantitative Study of Green Area for Climate Sensitive Terraced Housing Area Design in Malaysia

    Science.gov (United States)

    Yeo, O. T. S.; Saito, K.; Said, I.

    2014-02-01

    Neighbourhood plays a significant role in peoples' daily lives. Nowadays, terraced housing is common in Malaysia, and green areas in the neighborhood are not used to their maximum. The aim of the research is to quantify the types of green area that are most efficient for cooling the environment for thermal comfort and mitigation of Urban Heat Island. Spatial and environmental inputs are manipulated for the simulation using Geographic Information System (GIS) integrated with computational microclimate simulation. The outcome of this research is a climate sensitive housing environment model framework on the green area to solve the problem of Urban Heat Island.

  1. Quantitative Study of Green Area for Climate Sensitive Terraced Housing Area Design in Malaysia

    International Nuclear Information System (INIS)

    Neighbourhood plays a significant role in peoples' daily lives. Nowadays, terraced housing is common in Malaysia, and green areas in the neighborhood are not used to their maximum. The aim of the research is to quantify the types of green area that are most efficient for cooling the environment for thermal comfort and mitigation of Urban Heat Island. Spatial and environmental inputs are manipulated for the simulation using Geographic Information System (GIS) integrated with computational microclimate simulation. The outcome of this research is a climate sensitive housing environment model framework on the green area to solve the problem of Urban Heat Island

  2. Position paper on main areas of nuclear chemistry research and application

    International Nuclear Information System (INIS)

    Nuclear chemistry, with its specialized areas of nuclear chemistry, radiochemistry, and radiation chemistry, mainly covers these fields: basic research in nuclear chemistry; actinide chemistry; radioanalysis; nuclear chemistry in the life sciences, geosciences, and cosmic chemistry; radiotracers in technology; nuclear power technology; nuclear waste management; tritium chemistry in fusion technology, and radiation protection and radioecology. In the more than one hundred years of history of this branch of science and technology, which was opened up by the discovery of radioactivity and of the radioelements, pioneering discoveries and developments have been made in many sectors. Far beyond the confines of this area of work, they have achieved overriding importance in applications in many fields of technology and industry and in the life sciences. Research and application in nuclear chemistry continue to be highly relevant to society, ecology, and the economy, and the potential of science and technology in this field in Germany is acknowledged internationally. In the light of this vast area of activity, and against the need to maintain competence in nuclear chemistry for the use of nuclear power, irrespective of the status of this continued use in Germany, nuclear chemistry is indispensable to the solution of future problems. The Nuclear Chemistry Group of the Gesellschaft Deutscher Chemiker therefore uses this position paper to draw attention to the urgent need to keep up and further advance nuclear chemistry applications in a variety of areas of science and technology, also as a public duty of thorough education and research. (orig.)

  3. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    Energy Technology Data Exchange (ETDEWEB)

    Coenenberg, J.G.

    1997-08-15

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

  4. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    International Nuclear Information System (INIS)

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, 'operating' treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

  5. The NASA Applied Science Program Disasters Area: Disaster Applications Research and Response

    Science.gov (United States)

    Murray, J. J.; Lindsay, F. E.; Stough, T.; Jones, C. E.

    2014-12-01

    The goal of the Natural Disaster Application Area is to use NASA's capabilities in spaceborne, airborne, surface observations, higher-level derived data products, and modeling and data analysis to improve natural disaster forecasting, mitigation, and response. The Natural Disaster Application Area applies its remote sensing observations, modeling and analysis capabilities to provide hazard and disaster information where and when it is needed. Our application research activities specifically contribute to 1) Understanding the natural processes that produce hazards, 2)Developing hazard mitigation technologies, and 3)Recognizing vulnerability of interdependent critical infrastructure. The Natural Disasters Application area selects research projects through a rigorous, impartial peer-review process that address a broad spectrum of disasters which afflict populations within the United States, regionally and globally. Currently there are 19 active projects in the research portfolio which address the detection, characterization, forecasting and response to a broad range of natural disasters including earthquakes, tsunamis, volcanic eruptions and ash dispersion, wildfires, hurricanes, floods, tornado damage assessment, oil spills and disaster data mining. The Disasters team works with federal agencies to aid the government in meeting the challenges associated with natural disaster response and to transfer technologies to agencies as they become operational. Internationally, the Disasters Area also supports the Committee on Earth Observations Working Group on Disasters, and the International Charter on Space and Disasters to increase, strengthen, and coordinate contributions of NASA Earth-observing satellites and applications products to disaster risk management. The CEOS group will lead pilot efforts focused on identifying key systems to support flooding, earthquake, and volcanic events.

  6. Physicochemical and radiological studies on some egyptian aquatic areas

    International Nuclear Information System (INIS)

    For the purpose of estimating the radiological health and safety to the Egyptian population arises from the natural background involved with coastal areas, it is necessary to make a comprehensive study to investigate the natural radionuclides activities in this environmental ecology. The locations of such areas were chosen from those in which people spend some time (e.g. the Mediterranean and Red Sea beaches, Suez Canal in addition to the River Nile Ismailia Canal and Quaroun Lake). Water and soil samples were brought from these locations and subjected to intensive physical, chemical analysis and radiological investigations. The densities of the collected soil samples were found to fall in the region of clay densities (2.30 - 2.70 g/cm 3 ). The particle size distribution analysis, of these soil samples showed values ranging from 128 Μ m to 1303 Μ according to sample site. The collected samples are mainly silicates with variable amounts of the major cations; Ca++, Mg++, Na+, K+ with some other trace elements. For the radiological investigations 238U, 226Ra, 232Th and 40K activity concentrations were resolved by spectroscopy technique. The majority of samples examined in this work showed variable activities of the naturally occurring radionuclides with fairly low levels compared with literature values reported in other countries. The analysis and discussions of the obtained data are thoroughly performed with the use of equations to estimate the radiation doses

  7. U Plant Aggregate Area Management study technical baseline report

    International Nuclear Information System (INIS)

    This document was prepared in support of an Aggregate Area Management Study of U Plant. It provides a technical baseline of the aggregate area and results from an environmental investigation that was undertaken by the Technical Baseline Section of the Environmental Engineering Group, Westinghouse Hanford Company (WHC), which is currently the Waste Site and Facility Research Office, Natural Resources, Bechtel Hanford, Inc. (BHI). It is based upon review and evaluation of numerous Hanford Site current and historical reports, drawings and photographs, supplemented with site inspections and employee interviews. U Plant refers to the 221-U Process Canyon Building, a chemical separation facility constructed during World War II. It also includes the Uranium Oxide (UO3) Plant constructed at the same time as 221-U as an adjunct to the original plutonium separation process but which, like 221-U, was converted for other missions. Waste sites are associated primarily with U Plant's 1952 through 1958 Uranium Metal Recovery Program mission and the U03 Plant's ongoing U03 mission. Waste sites include cribs, reverse wells, french drains, septic tanks and drain fields, trenches, catch tanks, settling tanks, diversion boxes, a waste vault, and the lines and encasements that connect them. It also includes the U Pond and its feed ditches and an underground tank farm designed for high-level liquid wastes

  8. Strategies for development metropolitan areas. Case Study about configuration of the Galati Metropolitan Area

    OpenAIRE

    Adrian Zugravu; Florin Marian Buhociu

    2013-01-01

    Economic and social development of each locality and finally, of human communities that live here, depends increasingly on the ways of their internal organizing but also on becoming closer with social partners in the area(s) concerned. It is increasingly important that each locality (territorial administrative unit, TAU) solve multiple problems of ensuring development conditions through various strategies and policies of cooperation and association. These may represent a real support and vect...

  9. Effects of Biosolids and Manure Application on Microbial Water Quality in Rural Areas in the US

    Directory of Open Access Journals (Sweden)

    Amira Oun

    2014-11-01

    Full Text Available Most of the waterborne disease outbreaks observed in North America are associated with rural drinking water systems. The majority of the reported waterborne outbreaks are related to microbial agents (parasites, bacteria and viruses. Rural areas are characterized by high livestock density and lack of advanced treatment systems for animal and human waste, and wastewater. Animal waste from livestock production facilities is often applied to land without prior treatment. Biosolids (treated municipal wastewater sludge from large wastewater facilities in urban areas are often transported and applied to land in rural areas. This situation introduces a potential for risk of human exposure to waterborne contaminants such as human and zoonotic pathogens originating from manure, biosolids, and leaking septic systems. This paper focuses on waterborne outbreaks and sources of microbial pollution in rural areas in the US, characterization of the microbial load of biosolids and manure, association of biosolid and manure application with microbial contamination of surface and groundwater, risk assessment and best management practice for biosolids and manure application to protect water quality. Gaps in knowledge are identified, and recommendations to improve the water quality in the rural areas are discussed.

  10. [Progress of clinical application of functional MRI in the localization of brain language area].

    Science.gov (United States)

    Zhang, Nan; Lu, Junfeng; Wu, Jinsong

    2016-02-01

    For surgical operation in the functional area in the brain, it's commonly demanded to resect the lesion to the maximal extent on the basis of preserve the normal neural function, thus the precise localization of functional area is extremely important. As for the advantages of being widely available, easy to grasp and non-invasive, the functional MRI (fMRI) has come into wide use, while the application of language fMRI is still in the initial stage. It's important to choose appropriate fMRI task according to the individual condition of the subject, the commonly-adopted tasks include verb generation, picture naming, word recognition, word generation, etc. However, the effectiveness of using fMRI to localize language area is not totally satisfactory, adopting multiple task is an effective approach to improve the sensitivity of this technique. The application of resting state fMRI in the localization of language area and the further research of the role of fMRI in localizing the Chinese language area are the important future directions. PMID:26876086

  11. Integration of different geospatial data in urban areas: a case of study

    Science.gov (United States)

    Franci, Francesca; Lambertini, Alessandro; Bitelli, Gabriele

    2014-08-01

    Efficient management of the territory requires today the availability of comprehensive geographical data, accurate and up to date, supported by powerful databases. In this context, remote sensing data are used for a variety of applications related to urban areas; some examples are land use/cover mapping, urban growth and soil sealing evaluation, detection of green areas, updating of existing maps, energy applications and detection and characterization of buildings. This work aims to highlight how different geomatic techniques and data acquired from heterogeneous surveys can be today used together for producing or updating a digital cartography inside a GIS. The study has been conducted in the urban area of Bologna, Emilia-Romagna region, located in the North of Italy. A high resolution WorldView-2 satellite image and the DSM/DTM, obtained by airborne LiDAR, have been used to obtain a vector layer of the buildings. In particular, to distinguish the buildings among all the elements present in the study area, such as roads, trees, vegetated areas, etc., an object-oriented classification has been performed. This approach, working on groups of pixels (image objects), allows to expand the information content of the basic unit of classification. Therefore, features such as shape, texture and contextual information, coupled with spectral characteristics, potentially allow cartographers to generate products that are competitive, in terms of thematic contents, with those derived from the photo-interpretation. A first application described in this work is to perform a quick change analysis procedure based on the results of the classification compared to an existing numerical cartographic base or a previous classification.

  12. State waste discharge permit application: 200 Area Treated Effluent Disposal Facility (Project W-049H)

    International Nuclear Information System (INIS)

    As part of the original Hanford Federal Facility Agreement and Concent Order negotiations, US DOE, US EPA and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground to the Hanford Site are subject to permitting in the State Waste Discharge Permit Program (SWDP). This document constitutes the SWDP Application for the 200 Area TEDF stream which includes the following streams discharged into the area: Plutonium Finishing Plant waste water; 222-S laboratory Complex waste water; T Plant waste water; 284-W Power Plant waste water; PUREX chemical Sewer; B Plant chemical sewer, process condensate, steam condensate; 242-A-81 Water Services waste water

  13. PIXE study on ancient pottery from Chinese Shanghai area

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, H.S. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China)]. E-mail: hscheng@fudan.edu.cn; Zhang, Z.Q. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Song, J. [Shanghai Museum, Shanghai 200003 (China); Gao, M.H. [Department of Cultural Relics and Museology, Fudan University, Shanghai 200433 (China); Zhu, D. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Lin, J.W. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Feng, S.L. [Laboratory of Nuclear Analytical Techniques, Institute of High Energy Physics, Chinese Academy of Science, P.O. Box 918, Beijing 100039 (China)

    2006-08-15

    Shanghai is the largest city in China, and it also has a very long history. Archaeologists have found that six thousand yeas ago, there were ancient people living at Songze, Qingpu County, Shanghai. This paper reports the study of ancient potteries unearthed from the Guangfulin site located at Songjiang, Shanghai. The potteries unearthed from Guangfulin site belonged to two different culture types: the Liangzhu culture type (local culture) and a new culture, which might be derived from elsewhere. PIXE has been used to measure the chemical compositions of samples and factor analysis was used. Experimental results show that the compositions of the pottery from the two phases are different from each other. It means that the raw materials used to make the ancient pottery originate from different places. This results support the idea suggested by archaeologists that a group of ancient people migrated to the Shanghai area from some other place 4000 years ago.

  14. PIXE study on ancient pottery from Chinese Shanghai area

    International Nuclear Information System (INIS)

    Shanghai is the largest city in China, and it also has a very long history. Archaeologists have found that six thousand yeas ago, there were ancient people living at Songze, Qingpu County, Shanghai. This paper reports the study of ancient potteries unearthed from the Guangfulin site located at Songjiang, Shanghai. The potteries unearthed from Guangfulin site belonged to two different culture types: the Liangzhu culture type (local culture) and a new culture, which might be derived from elsewhere. PIXE has been used to measure the chemical compositions of samples and factor analysis was used. Experimental results show that the compositions of the pottery from the two phases are different from each other. It means that the raw materials used to make the ancient pottery originate from different places. This results support the idea suggested by archaeologists that a group of ancient people migrated to the Shanghai area from some other place 4000 years ago

  15. Reflection seismic studies in the Forsmark area - stage 1

    International Nuclear Information System (INIS)

    Reflection seismic data were acquired in the Spring of 2002 in the Forsmark area, located about 70 km northeast of Uppsala, Sweden. The Forsmark area has been targeted by SKB as a possible storage site for high level radioactive waste. About 16 km of high resolution seismic data were acquired along five separate profiles varying in length from 2 to 5 km. Non-final source and receiver spacing was 10 m with 100 active channels when recording data from a dynamite source (15-75 g). The profiles were located within a relatively undeformed lens of bedrock that trends in the NW-SE direction. The lens is surrounded by highly deformed rock on all sides. In conjunction with the reflection component of the study, all shots were also recorded on up to eleven 3-component fixed Orion seismographs. These recordings provided long offset data from which a velocity model of the uppermost 400 m of bedrock could be derived. Results from the study show that the bedrock has been well imaged down to depths of at least 3 km. The upper 1000 m of bedrock is much more reflective in the southeastern portion of the lens compared to the northwestern part close to the Forsmark reactors. This is interpreted as the bedrock being more homogeneous in the northwest. However, a major reflective zone (the A1 reflector) is interpreted to dip to the S-SE below this homogeneous bedrock. In the southeastern portion of the lens the orientation of the reflectors is well determined where the profiles cross one another. The general strike of the major reflectors is NE-SW with dips of 20-35 degrees to the southeast

  16. Small Glacier Area Studies: A New Approach for Turkey

    Science.gov (United States)

    Yavasli, Dogukan D.; Tucker, Compton J.

    2012-01-01

    Many regions of Earth have glaciers that have been neglected for study because they are small. We report on a new approach to overcome the problem of studying small glaciers, using Turkey as an example. Prior to our study, no reliable estimates of Turkish glaciers existed because of a lack of systematic mapping, difficulty in using Landsat data collected before 1982, snowpack vs. glacier ice differentiation using existing satellite data and aerial photography, the previous high cost of Landsat images, and a lack of high-resolution imagery of small Turkish glaciers. Since 2008, a large number of Turkey. We also used five Landsat-3 Return Beam Videcon (RBV) 30 m pixel resolution images, all from 1980, for six glaciers. The total area of Turkish glaciers decreased from 23 km2 in the 1970s to 10.1 km2 in 2007-2011. By 2007-2011, six Turkish glaciers disappeared, four were < 0.3 km2, and only three were 1.0 km2 or larger. No trends in precipitation from 1970 to 2006 and cloud cover from 1980 to 2010 were found, while surface temperatures increased, with summer minimum temperatures showing the greatest increase. We conclude that increased surface temperatures during the summer were responsible for the 56% recession of Turkish glaciers from the 1970s to 2006-2011.

  17. Mapping urban climate zones and quantifying climate behaviors - An application on Toulouse urban area (France)

    OpenAIRE

    Houet, Thomas; Pigeon, Grégoire

    2011-01-01

    Facing the concern of the population to its environment and to climatic change, city planners are now considering the urban climate in their choices of planning. The use of climatic maps, such Urban Climate Zone--UCZ, is adapted for this kind of application. The objective of this paper is to demonstrate that the UCZ classification, integrated in the World Meteorological Organization guidelines, first can be automatically determined for sample areas and second is meaningful according to climat...

  18. Application of a CZT detector to in situ environmental radioactivity measurement in the Fukushima area

    International Nuclear Information System (INIS)

    Instead of conventional Ge semiconductor detectors and NaI(Tl) scintillation spectrometers, an application of a CdZnTe semiconductor (CZT) whose crystal has the dimension of 1 cm cubic to the in situ environmental radioactivity measurement was attempted in deeply affected areas in Fukushima region. Results of deposition density on soil for 134Cs/137Cs obtained seemed consistent, comparing obtained results with those measured by the Japanese government. (authors)

  19. The Bay Area HIE. A case study in connecting stakeholders.

    Science.gov (United States)

    Saff, Eric; Lanway, Craig; Chenyek, Armando; Morgan, Dave

    2010-01-01

    The core philosophy of health information exchanges is to bring together industry stakeholders to facilitate the movement of actionable healthcare information within or across organizations. One workable model for automating the HIE is the virtual health exchange. It allows an organization to satisfy its electronic data exchange needs, while positioning it for HIO/RHIO and Nationwide Health Information Network inclusion. Four healthcare organizations in the San Francisco bay area offer a unique case study of this emerging model and a distinctive technology strategy using HIPAA-compliant SaaS online connectivity. The article will explore the foundational elements such as platform connectivity solutions and services that meet the federal HIT Policy Committee's approved recommendation of "meaningful use" 2011 criteria for exchange health information. Several ambulatory solutions are integrated into the data and workflow. The Bay Area HIE consists of John Muir Health, a private health system; Hill Physicians Medical Group, an independent physicians' organization; Alta Bates Medical Group, a 600-physician IPA; San Ramon Regional Medical Center, a 123-bed, acute-care hospital; and University of California, San Francisco (UCSF), a large academic health system. Collectively, 2,800-plus physicians, 900,000 patients, numerous reference labs and interoperability among several health IT vendors are involved. Providers and hospitals are exchanging data and 136,000 patients have connected online to their records. Connected physicians have access to online services, e.g., results management, messaging, colleague-to-colleague messaging, referrals, and eprescribing. Patients are offered secure messaging, including preventive care reminders, PHRs, lab results, script renewals, bill payment, appointment requests, referrals and education services. Revealed are resulting care coordination and practice operational improvements. PMID:20077922

  20. [Radiation Environment Study of Near Space in China Area].

    Science.gov (United States)

    Mei, Xiao-dong; Sun, Ji-lin; Li, Zheng-qiang; Chen, Xing-feng; Xing, Jin; Xu, Hua; Qie, Li-li; Lü, Yang; Li, Yang; Liu, Li

    2016-03-01

    Aerospace activity in near space (20-50 km) has become a research hotspot for aviation big countries worldwide. Solar radiation study, as the prerequisite to carry out aerospace activity, is facing the barrier of lacking of observation in near space layer. Ozone is the most important factor that affects radiation value in this layer. Based on ECMWF reanalysis data, this input key parameter and its horizontal, vertical and temporal characteristics are analyzedwith results showing obvious regional features in temporal-spatial distribution and varieties. With meteorological data and surface parameters, near space over China is divided into 5 parts. Key factors' value is confirmed over each division. With SBDART radiation transfer model, solar radiation and ultraviolet radiation simulation in near space are conducted separately. Results show that it is influenced by latitude, total ozone and its vertical distribution, radiation varies under complex rules. The average year and monthly solar radiation strengthens changes with latitude reduction, while annual range changes reversely. Air absorbing is related to latitude and land-sea contrast and shows different values and seasonal variations. The ultraviolet radiation over South China Sea reaches its maximum value and minimum annual range, as well as minimum monthly range with value strengthening in summer and weakening in winter. In other areas radiation increases in summer while weakens in winter, monthly range shows double peaks with higher value in spring and autumn, lower in summer and winter. Air absorption in ultraviolet radiation is influenced by multiple factors, vertical varieties over areas besides South China Sea enhance in summer time. The vertical changes of monthly ranges affected by air absorption show consistence in higher and lower layer in June and July, while in other months ranges are bigger in higher layer. PMID:27400492

  1. Decision 99-18: Range Petroleum Corporation application for a well licence, Sturgeon Lake Area

    International Nuclear Information System (INIS)

    Range Petroleum Corporation (Range) applied to the Alberta Energy and Utilities Board (EUB) pursuant to Section 2.020 of the Oil and Gas Conservation Regulations for a well licence to drill a sour oil well from a surface location in Legal Subdivision 4, Section 34, West of the fifth Meridian, directionally to a bottom-hole location under Sturgeon Lake. The purpose of the proposed well would be to obtain sour oil production from the Leduc Formation. The well would be a Level 1 well because it would have a potential maximum hydrogen sulphide release rate of 0.0412 cubic m/s. The EUB received objections to the application from landowners, cattle ranchers, farmers, residents, and cottage owners in the area of the proposed well. The application and intervention were considered at a public hearing on 26 January 1999 in Grande Prairie, Alberta, and the Board viewed the proposed surface location, the previous Lds 3-2 surface location, and the surrounding area prior to the hearing. Having carefully considered the evidence, the Board believed that it would be possible to drill the proposed well safely and with minimal risk, subject to attached conditions. But in light of the unique setting of the area, including the residences and the road and lake configurations, and the difficulty that would exist preparing an effective environmental review process (ERP), the Board deferred its decision on the well licence application until an approved ERP is in place

  2. Duke Energy Photovoltaic Integration Study: Carolinas Service Areas

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shuai; Samaan, Nader A.; Meng, Da; Chassin, Forrest S.; Zhang, Yu; Vyakaranam, Bharat; Warwick, William M.; Fuller, Jason C.; Diao, Ruisheng; Nguyen, Tony B.; Jin, Chunlian

    2014-03-01

    Solar energy collected using photovoltaic (PV) technology is a clean and renewable energy source that offers multiple benefits to the electric utility industry and its customers, such as cost predictability, reduced emissions, and loss reduction by distributed installations. Renewable energy goals established in North Carolina Senate Bill 3 (SB3), in combination with the state tax credit and decreases in the cost of energy from PV panels, have resulted in rapid solar power penetration within the Carolinas services areas of Duke Energy. Continued decreases in PV prices are expected to lead to greater PV penetration rates than currently required in SB3. Despite the potential benefits, significant penetration of PV energy is of concern to the utility industry because of its impact on operating reliability and integration cost to customers, and equally important, how any additional costs may be allocated to different customer groups. Some of these impacts might become limiting factors for PV energy, especially growing distributed generation installed at customer sites. Recognizing the importance of renewable energy developments for a sustainable energy future and economic growth, Duke Energy has commissioned this study to simulate the effects of high-PV penetration rates and to initiate the process of quantifying the impacts. The objective of the study is to inform resource plans, guide operation improvements, and drive infrastructure investments for a steady and smooth transition to a new energy mix that provides optimal values to customers. The study team consists of experts from Pacific Northwest National Laboratory (PNNL), Power Costs, Inc. (PCI), Clean Power Research (CPR), Alstom Grid, and Duke Energy. PNNL, PCI, and CPR performed the study on generation impacts; Duke Energy modeled the transmission cases; and distribution simulations were conducted by Alstom Grid. PNNL analyzed the results from each work stream and produced the report.

  3. PIXE study on ancient pottery from Chinese Sanxia area

    International Nuclear Information System (INIS)

    Thirty-nine pieces of Neolithic pottery, made about 4500 years ago, were collected from Maliutuo, Maliuwan and Suheping village sites in Chinese Sanxia area. Nine pieces of pottery in the Shang Dynasty (1600-1100 BC) and ten pieces of pottery in the Eastern Zhou Dynasty (770-256 BC) were also collected from Maliutuo. PIXE and factor analysis were used to study interchange of the Neolithic pottery between these three sites. The source of raw material of pottery from Maliutuo was simultaneously studied. The major and trace element contents in pottery were determined by PIXE. Factor analysis was employed to classify these pieces of pottery. The results showed that the trace element contents were more useful to distinguish these pieces of pottery than the major element contents. In about 2500 BC, no interchange of pottery occurred between the three villages. Although Maliutuo was close to Maliuwan, the pottery products used in daily life in the two villages were independently made and not exchanged. In the source of raw material, the Neolithic pottery samples from Maliutuo were identical with those in the Shang Dynasty, but different from those in the Eastern Zhou Dynasty

  4. PIXE study on ancient pottery from Chinese Sanxia area

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, B.; Pan, B.H.; Zhang, Z.Q.; Cheng, H.S. E-mail: hscheng@fudan.edu.cn; Gao, M.H.; Yang, F.J.; Peng, X.B

    2004-06-01

    Thirty-nine pieces of Neolithic pottery, made about 4500 years ago, were collected from Maliutuo, Maliuwan and Suheping village sites in Chinese Sanxia area. Nine pieces of pottery in the Shang Dynasty (1600-1100 BC) and ten pieces of pottery in the Eastern Zhou Dynasty (770-256 BC) were also collected from Maliutuo. PIXE and factor analysis were used to study interchange of the Neolithic pottery between these three sites. The source of raw material of pottery from Maliutuo was simultaneously studied. The major and trace element contents in pottery were determined by PIXE. Factor analysis was employed to classify these pieces of pottery. The results showed that the trace element contents were more useful to distinguish these pieces of pottery than the major element contents. In about 2500 BC, no interchange of pottery occurred between the three villages. Although Maliutuo was close to Maliuwan, the pottery products used in daily life in the two villages were independently made and not exchanged. In the source of raw material, the Neolithic pottery samples from Maliutuo were identical with those in the Shang Dynasty, but different from those in the Eastern Zhou Dynasty.

  5. ANALYTICAL STUDY OF POPULATION STRUCTURE BY SAMPLING IN RURAL AREAS

    Directory of Open Access Journals (Sweden)

    F. Azordegan

    1973-03-01

    Full Text Available Despite the care taken to ensure the quality of date collected by enumeration and sampling, the final tabulation will sometimes give obvious indication of errors in basic information. Evaluation of these errors furnishes those who use such a study and sampling. More general, the finding in these studies should be helpful to others that conduct surveys. In order to compare the age composition of the rural areas between two provinces of IRAN, i.e. AZARBAIJAN, and ISFAHAN, a sample of each has selected (8 and 23 counties respectively.The main idea was to evaluate the errors in age recording and the effect of digit preference on the age composition of the population. It became evident that, AZARBAIJAN has a smaller family size, lower median age, higher sex ratio and lower dependency ratio than ISFAHAN. More over, the age pyramid of ISFAHAN has a better shape and more regular than AZARBAIJAN and therefore the Myer’s Index which determines the degree of dispersion in age reporting is lower in ISFAHAN which may be the result of higher literacy in ISFAHAN. Generally men in both samples report their age more precisely than women.

  6. Submerged macrophyte communities in the Forsmark area. Building of a GIS application as a tool for biomass estimations

    International Nuclear Information System (INIS)

    The aim of this study was to compile the information from previous studies to produce a GIS application that both illustrates the distribution of different vegetation communities and also makes it possible to estimate the total biomass of the different vegetation communities and its associated fauna. The GIS application was created by means of the software Arc View 3.3 by Environmental Systems Research Institute, Inc. Distribution readings and quantitative data of submerged macrophyte communities and its associated fauna was obtained from studies by Kautsky et al. and by Borgiel. Information about the macrophyte distribution in Laangoersviken, located in the northern parts of Kallrigafjaerden, was obtained from a report by Upplandsstiftelsen. Information about water depth and bottom substrate was available as USGS DEM file, produced by Geological Survey of Sweden. Complementary data of the covering degree of submerged vegetation was obtained from a study using an under water video camera by Tobiasson. Quantitative data on macrophyte and faunal biomass were either obtained from the primary SKB data base SICADA or directly from reports. Samples were compiled and analysed according to dominating vegetation. The work was carried out as follows: Where information about the bottom substrate was available polygons were created by means of the substrate shape file and depth grid from Geological Survey of Sweden. The vegetation community and the covering degree on a certain depth and substrate combination were determined by compiled information from studies by Kautsky and by Borgiel. All observations from a certain bottom substrate were analysed to find the dominating vegetation within different depth ranges. After determining the dominating vegetation, the covering degrees of different macrophyte classes within each depth range were calculated as a mean of all readings. Areas without information about the bottom substrate, but still adjacent to areas included in the

  7. Submerged macrophyte communities in the Forsmark area. Building of a GIS application as a tool for biomass estimations

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksson, Ronny [Univ. of Kalmar (Sweden)

    2005-12-15

    The aim of this study was to compile the information from previous studies to produce a GIS application that both illustrates the distribution of different vegetation communities and also makes it possible to estimate the total biomass of the different vegetation communities and its associated fauna. The GIS application was created by means of the software Arc View 3.3 by Environmental Systems Research Institute, Inc. Distribution readings and quantitative data of submerged macrophyte communities and its associated fauna was obtained from studies by Kautsky et al. and by Borgiel. Information about the macrophyte distribution in Laangoersviken, located in the northern parts of Kallrigafjaerden, was obtained from a report by Upplandsstiftelsen. Information about water depth and bottom substrate was available as USGS DEM file, produced by Geological Survey of Sweden. Complementary data of the covering degree of submerged vegetation was obtained from a study using an under water video camera by Tobiasson. Quantitative data on macrophyte and faunal biomass were either obtained from the primary SKB data base SICADA or directly from reports. Samples were compiled and analysed according to dominating vegetation. The work was carried out as follows: Where information about the bottom substrate was available polygons were created by means of the substrate shape file and depth grid from Geological Survey of Sweden. The vegetation community and the covering degree on a certain depth and substrate combination were determined by compiled information from studies by Kautsky and by Borgiel. All observations from a certain bottom substrate were analysed to find the dominating vegetation within different depth ranges. After determining the dominating vegetation, the covering degrees of different macrophyte classes within each depth range were calculated as a mean of all readings. Areas without information about the bottom substrate, but still adjacent to areas included in the

  8. Application of stereological methods to estimate post-mortem brain surface area using 3T MRI

    DEFF Research Database (Denmark)

    Furlong, Carolyn; García-Fiñana, Marta; Puddephat, Michael;

    2013-01-01

    The Cavalieri and Vertical Sections methods of design based stereology were applied in combination with 3 tesla (i.e. 3T) Magnetic Resonance Imaging (MRI) to estimate cortical and subcortical volume, area of the pial surface, area of the grey-white matter boundary, and thickness of the cerebral...... cortex. The material comprises eight human cadaveric cerebri which had been separated into sixteen cerebral hemisphere specimens prior to embedding in agar gel. The results from MRI were compared with corresponding 'gold standard' values subsequently obtained by application of the same methodology using...... physical sectioning of the specimens. 95% agreement intervals revealed poor agreement between MR imaging and physical sectioning, specially for pial surface and thickness, as well as cerebral cortex and subcortex volumes. On average, pial surface area was estimated to be almost half the extent using MRI...

  9. Importance of Data Mining with Different Types of Data Applications and Challenging Areas

    Directory of Open Access Journals (Sweden)

    Ms. Aruna J. Chamatkar

    2014-05-01

    Full Text Available Data mining is an increasingly popular set of tools for dealing with large amounts of data, often collected in haphazard fashion with many missing values. This type of huge amount of data’s are available in the form of tera- to peta-bytes which has drastically changed in the areas of science and engineering. To analyze, manage and make a decision of such type of huge amount of data there are need to techniques called the data mining which will transforming in many fields. In Data Mining data sets will be explored to yield hidden and unknown predictions which can be used in future for the efficient decision making. Data Mining that involves pattern recognition, mathematical and statistical techniques to search data Warehouses and help the analyst in recognizing significant trends, facts relationships and anomalies. In this paper we discuss the importance of data mining , different challenging areas and application areas in data mining .

  10. Functional Imaging of Broca’s Area in Native Persian Speakers: An fMRI Study

    Directory of Open Access Journals (Sweden)

    A Mahdavi

    2008-12-01

    Full Text Available Background/Objective: The problem of localization of speech associated cortices using noninvasive methods has been of utmost importance in many neuroimaging studies, but the results are difficult to resolve for specific neurosurgical applications. In this study, we used fMRI to delineate language-related brain activation patterns with emphasis on the Broca's area during the execution of two Persian language tasks."nPatients and Methods: The subjects comprised of nine healthy right-handed men who participated voluntarily in this study. They performed two consequent fMRI paradigms namely; "Word Production" and "Reverse Word Reading". The fMRI data were collected and analyzed. Then, functional images were registered to anatomical images using FSL software. The laterality indices were also calculated in regions of interest with different threshold levels."nResults: The results indicate that Broca's area, as the classical language-production center, was robustly activated while performing these two tasks. In eight out of nine subjects, the left hemisphere dominancy and Broca's area activation were observed and in one case activation was prominent in the homologous area in the right hemisphere."nConclusion: Similar pattern of cortical activation during Persian word production and Anglophone languages such as English was revealed. fMRI is a valuable means for brain mapping in language studies.

  11. Offshore wind; proposed study areas; Havvind; forslag til utredningsomraader

    Energy Technology Data Exchange (ETDEWEB)

    Drivenes, Arvid; Eirum, Tale; Johnson, Nils Henrik; Mindeberg, Sigrun Kavli; Lunde, Synnoeve; Undem, Linn Silje; Veggeland, Kirsti; Veie-Rosvoll, Brit; Voksoe, Astrid

    2010-10-15

    The report suggests areas that may be suitable for establishing of offshore wind power, and should be further evaluated in a strategic environmental impact assessment, as it is designed to through Proposition. No. 107 (2008-2009). The proposed areas is shown in Figure 1 Eleven of the areas suitable for fixed installations and four sites suitable for floating installations. The work of the report has been carried out by a Directorate group led by the Norwegian Water Resources and Energy Directorate. (AG)

  12. Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility

    International Nuclear Information System (INIS)

    The 200 Area Effluent Treatment Facility Dangerous Waste Permit Application documentation consists of both Part A and a Part B permit application documentation. An explanation of the Part A revisions associated with this treatment and storage unit, including the current revision, is provided at the beginning of the Part A section. Once the initial Hanford Facility Dangerous Waste Permit is issued, the following process will be used. As final, certified treatment, storage, and/or disposal unit-specific documents are developed, and completeness notifications are made by the US Environmental Protection Agency and the Washington State Department of Ecology, additional unit-specific permit conditions will be incorporated into the Hanford Facility Dangerous Waste Permit through the permit modification process. All treatment, storage, and/or disposal units that are included in the Hanford Facility Dangerous Waste Permit Application will operate under interim status until final status conditions for these units are incorporated into the Hanford Facility Dangerous Waste Permit. The Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility contains information current as of May 1, 1993

  13. Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The 200 Area Effluent Treatment Facility Dangerous Waste Permit Application documentation consists of both Part A and a Part B permit application documentation. An explanation of the Part A revisions associated with this treatment and storage unit, including the current revision, is provided at the beginning of the Part A section. Once the initial Hanford Facility Dangerous Waste Permit is issued, the following process will be used. As final, certified treatment, storage, and/or disposal unit-specific documents are developed, and completeness notifications are made by the US Environmental Protection Agency and the Washington State Department of Ecology, additional unit-specific permit conditions will be incorporated into the Hanford Facility Dangerous Waste Permit through the permit modification process. All treatment, storage, and/or disposal units that are included in the Hanford Facility Dangerous Waste Permit Application will operate under interim status until final status conditions for these units are incorporated into the Hanford Facility Dangerous Waste Permit. The Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility contains information current as of May 1, 1993.

  14. Preliminary study on hydrogeology in tectonically active areas

    International Nuclear Information System (INIS)

    This report represents the final product of a background literature review conducted for the Nuclear Waste Management Organization of Japan (NUMO) by Sandia National Laboratories, Albuquerque, New Mexico, USA. Internationally, research of hydrological and transport processes in the context of high level waste (HLW) repository performance, has been extensive. However, most of these studies have been conducted for sites that are within tectonically stable regions. Therefore, in support of NUMO's goal of selecting a site for a HLW repository, this literature review has been conducted to assess the applicability of the output from some of these studies to the geological environment in Japan. Specifically, this review consists of two main tasks. The first was to review the major documents of the main HLW repository programs around the world to identify the most important hydrologic and transport parameters and processes relevant in each of these programs. The review was to assess the relative importance of processes and measured parameters to site characterization by interpretation of existing sensitivity analyses and expert judgment in these documents. The second task was to convene a workshop to discuss the findings of Task 1 and to prioritize hydrologic and transport parameters in the context of the geology of Japan. This report details the results and conclusions of both of these Tasks

  15. Preliminary study on hydrogeology in tectonically active areas.

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Thomas Stephen; Lappin, Allen R.; Gettemy, Glen L.; Jensen, Richard Pearson; Arnold, Bill Walter; James, Scott Carlton; Lee, Moo Yul; Meier, Diane A.

    2006-09-01

    This report represents the final product of a background literature review conducted for the Nuclear Waste Management Organization of Japan (NUMO) by Sandia National Laboratories, Albuquerque, New Mexico, USA. Internationally, research of hydrological and transport processes in the context of high level waste (HLW) repository performance, has been extensive. However, most of these studies have been conducted for sites that are within tectonically stable regions. Therefore, in support of NUMO's goal of selecting a site for a HLW repository, this literature review has been conducted to assess the applicability of the output from some of these studies to the geological environment in Japan. Specifically, this review consists of two main tasks. The first was to review the major documents of the main HLW repository programs around the world to identify the most important hydrologic and transport parameters and processes relevant in each of these programs. The review was to assess the relative importance of processes and measured parameters to site characterization by interpretation of existing sensitivity analyses and expert judgment in these documents. The second task was to convene a workshop to discuss the findings of Task 1 and to prioritize hydrologic and transport parameters in the context of the geology of Japan. This report details the results and conclusions of both of these Tasks.

  16. Lifecycle Assessment of Beijing-Area Building Energy Use and Emissions: Summary Findings and Policy Applications

    Energy Technology Data Exchange (ETDEWEB)

    Aden, Nathaniel; Qin, Yining; Fridley, David

    2010-09-15

    Buildings are at the locus of three trends driving China's increased energy use and emissions: urbanization, growing personal consumption, and surging heavy industrial production. Migration to cities and urban growth create demand for new building construction. Higher levels of per-capita income and consumption drive building operational energy use with demand for higher intensity lighting, thermal comfort, and plug-load power. Demand for new buildings, infrastructure, and electricity requires heavy industrial production. In order to quantify the implications of China's ongoing urbanization, rising personal consumption, and booming heavy industrial sector, this study presents a lifecycle assessment (LCA) of the energy use and carbon emissions related to residential and commercial buildings. The purpose of the LCA model is to quantify the impact of a given building and identify policy linkages to mitigate energy demand and emissions growth related to China's new building construction. As efficiency has become a higher priority with growing energy demand, policy and academic attention to buildings has focused primarily on operational energy use. Existing studies estimate that building operational energy consumption accounts for approximately 25% of total primary energy use in China. However, buildings also require energy for mining, extracting, processing, manufacturing, and transporting materials, as well as energy for construction, maintenance, and decommissioning. Building and supporting infrastructure construction is a major driver of industry consumption--in 2008 industry accounted for 72% of total Chinese energy use. The magnitude of new building construction is large in China--in 2007, for example, total built floor area reached 58 billion square meters. During the construction boom in 2007 and 2008, more than two billion m{sup 2} of building space were added annually; China's recent construction is estimated to account for half of global

  17. Environmental studies in Khartoum area using x-ray fluorescence

    International Nuclear Information System (INIS)

    In the present work an attempt has been made for the analysis of some soil, plant, sediments and fish samples of relevance to environmental pollution in Khartoum area. These samples have been collected from different places in residential areas, so as to cover industrial areas, agricultural and residential areas, as well as Tuti Island as control area. Special attention has been dedicated to the analysis of lead concentrations resulting from automobile-emissions in soils and to other toxic metals such as Cr in some industries. The samples were analysed by x-ray fluorescence (XRF) technique. The results obtained using XRF measurements and computer software called QXAS for data analysis. The concentrations of lead and some heavy metals such as Cr in soils from certain locations were alarming and may create pollution problems in the near future. The results obtained from different countries. The results are generally lower than the international limits. (Author)

  18. Study on trace elements in gangue in Huainan mining area

    Energy Technology Data Exchange (ETDEWEB)

    Cai, F.; Liu, Z.; Lin, B.; Li, W.; Lu, Z. [Anhui University of Science and Technology, Huainan (China)

    2008-08-15

    46 samples were gathered from coal seams and rocks of various lithological types. In these samples, trace elements were analyzed by inductively coupled plasma-mass spectrometry (IAP-MS)and instrumental neutron activation analysis (IAA). Hg was analyzed by cold-vapor atomic absorption spectrometry (KVASS), F by ion-selective electrode (IS) and major elements by chemical methods. Eleven trace elements (Cd, Cu, Ni, Sn, Hg, Mn, As, Cr, Pb, Zn, F) were selected for study, and five of them, Cd, Cu, Ni, Sn, Hg, were above the background soil level (B.L.) of Huainan City, China and world averages. Respectively: Cd is 40 and 7 times the B.L. of Huainan City and the world; Cu is about 2 and 1.5 times the B.L. of Huainan City and the world; Ni is 8 and 7 times the B.L. of Huainan City and the world; Sn is 3 and 2 times the B.L. of Huainan City and the world; and Hg is 3,602 and 1,381 times the B.L. of Huainan City and the world. Their hazards caused to the environment of the mining area are explored primarily. It is thought that their hazards may be cumulative. 15 refs., 1 fig., 3 tabs.

  19. Mineral resources of the Little High Rock Canyon Wilderness Study Area, Humboldt and Washoe counties, Nevada

    International Nuclear Information System (INIS)

    The Little High Rock Canyon Wilderness Study Area consists of approximately 52,143 acres of flat-lying Tertiary volcanic rocks and associated sediments. No resources were identified in the study area, but three areas contain moderate potential for epithermal gold and silver resources. The rest of the area has low potential for epithermal gold and silver resources. The study area also contains three small areas of low potential for perlite, pozzolan, and uranium

  20. Gravity models to classify commuting vs. resident workers. An application to the analysis of residential risk in a contaminated area

    Directory of Open Access Journals (Sweden)

    La Rocca Marina

    2011-01-01

    Full Text Available Abstract Background The analysis of risk for the population residing and/or working in contaminated areas raises the topic of commuting. In fact, especially in contaminated areas, commuting groups are likely to be subject to lower exposure than residents. Only very recently environmental epidemiology has started considering the role of commuting as a differential source of exposure in contaminated areas. In order to improve the categorization of groups, this paper applies a gravitational model to the analysis of residential risk for workers in the Gela petrochemical complex, which began life in the early 60s in the municipality of Gela (Sicily, Italy and is the main source of industrial pollution in the local area. Results A logistic regression model is implemented to measure the capacity of Gela "central location" to attract commuting flows from other sites. Drawing from gravity models, the proposed methodology: a defines the probability of finding commuters from municipalities outside Gela as a function of the origin's "economic mass" and of its distance from each destination; b establishes "commuting thresholds" relative to the origin's mass. The analysis includes 367 out of the 390 Sicilian municipalities. Results are applied to define "commuters" and "residents" within the cohort of petrochemical workers. The study population is composed of 5,627 workers. Different categories of residence in Gela are compared calculating Mortality Rate Ratios for lung cancer through a Poisson regression model, controlling for age and calendar period. The mobility model correctly classifies almost 90% of observations. Its application to the mortality analysis confirms a major risk for lung cancer associated with residence in Gela. Conclusions Commuting is a critical aspect of the health-environment relationship in contaminated areas. The proposed methodology can be replicated to different contexts when residential information is lacking or unreliable

  1. Electrical distribution studies for the 200 Area tank farms

    Energy Technology Data Exchange (ETDEWEB)

    Fisler, J.B.

    1994-08-26

    This is an engineering study providing reliability numbers for various design configurations as well as computer analyses (Captor/Dapper) of the existing distribution system to the 480V side of the unit substations. The objective of the study was to assure the adequacy of the existing electrical system components from the connection at the high voltage supply point through the transformation and distribution equipment to the point where it is reduced to its useful voltage level. It also was to evaluate the reasonableness of proposed solutions of identified deficiencies and recommendations of possible alternate solutions. The electrical utilities are normally considered the most vital of the utility systems on a site because all other utility systems depend on electrical power. The system accepts electric power from the external sources, reduces it to a lower voltage, and distributes it to end-use points throughout the site. By classic definition, all utility systems extend to a point 5 feet from the facility perimeter. An exception is made to this definition for the electric utilities at this site. The electrical Utility System ends at the low voltage section of the unit substation, which reduces the voltage from 13.8 kV to 2,400, 480, 277/480 or 120/208 volts. These transformers are located at various distances from existing facilities. The adequacy of the distribution system which transports the power from the main substation to the individual area substations and other load centers is evaluated and factored into the impact of the future load forecast.

  2. Electrical distribution studies for the 200 Area tank farms

    International Nuclear Information System (INIS)

    This is an engineering study providing reliability numbers for various design configurations as well as computer analyses (Captor/Dapper) of the existing distribution system to the 480V side of the unit substations. The objective of the study was to assure the adequacy of the existing electrical system components from the connection at the high voltage supply point through the transformation and distribution equipment to the point where it is reduced to its useful voltage level. It also was to evaluate the reasonableness of proposed solutions of identified deficiencies and recommendations of possible alternate solutions. The electrical utilities are normally considered the most vital of the utility systems on a site because all other utility systems depend on electrical power. The system accepts electric power from the external sources, reduces it to a lower voltage, and distributes it to end-use points throughout the site. By classic definition, all utility systems extend to a point 5 feet from the facility perimeter. An exception is made to this definition for the electric utilities at this site. The electrical Utility System ends at the low voltage section of the unit substation, which reduces the voltage from 13.8 kV to 2,400, 480, 277/480 or 120/208 volts. These transformers are located at various distances from existing facilities. The adequacy of the distribution system which transports the power from the main substation to the individual area substations and other load centers is evaluated and factored into the impact of the future load forecast

  3. Application of Statistical Methods to Assess Carbon Monoxide Pollution Variations within an Urban Area

    OpenAIRE

    Carmen Capilla

    2012-01-01

    In recent years there have been considerable new legislation and efforts by vehicle manufactures aimed at reducing pollutant emission to improve air quality in urban areas. Carbon monoxide is a major pollutant in urban areas, and in this study we analyze monthly carbon monoxide (CO) data from Valencia City, a representative Mediterranean city in terms of its structure and climatology. Temporal and spatial trends in pollution were recorded from a monitoring net- work that consisted of five mon...

  4. The Study of Ground Deformation Risk With Seismic Applications

    International Nuclear Information System (INIS)

    As it is Kown, analysis are made with various methods in studying the grounds which convey the deformation risk under the influence of any force. In the analysis which are made mostly by assumptions, each method has its advantages and disadvantages. Most methods which are applied are not sufficient alone and the decision is made according to the experience and comments of the engineer most of the time and there may exist ambiguity in these comments. As it is Kown, besides most data obtained by the seismic applications; rigidity, porosity, saturation and the layer thicKess of a ground is also determined. The data concerning the rigidity and porosity of the ground, landslide, liquefaction, consolidation, plasticity, etc. is obtained as well, moreover, a general result is achieved by evaulating all of the calculated dynamic paramaters. This study is made on two different areas in Istanbul-Esenyurt which have similar litological and morphological slopes. In the first study area, the risk factor is tried to be determined in the deformed region which has 10-25% morphological slope and in the remaining region. In the second study area the data obtained from two study areas are compared and the landslide risk of the ground having slope in the range 10- 25% is examined. As the conclusion of the study, ground deformation is examined with the seismic and dynamic data. In the landslided areas or in the areas having potential landslide risk; it is understood that the seismic reflection data are untolerably diversing from the N30 data obtained from the SPT experiments done in borehole studies. In this study, according to the results achieved by seismic applications, it is observed that the grounds which have undergone deformation depending on the litological structure have Vp/Vs ratio greater than 4 or the shear wave velocity Vs smaller than 222 m/s. In this study again, in the area which ground deformation is expected, it is observed that Vp/Vs ratio is between 4,44-8,85, shear

  5. Urbanisation of rural areas: A case study from Jutland, Denmark

    DEFF Research Database (Denmark)

    Madsen, Mette Fabricius; Kristensen, Søren Bech Pilgaard; Fertner, Christian;

    2010-01-01

    The growth of urban areas is one of the most important characteristics of spatial development in Europe during the past decades and is traditionally described with a few indicators on a relatively coarse spatial scale. However, urbanisation is not only a matter of land use change, but also socio......-economic changes, which may or may not manifest itself as physical changes in built-up area and land use. It is therefore useful to analyse the urbanisation patterns along an urban-rural continuum, based on a broad range of indicators. This paper analyses urbanisation patterns in rural areas of Region Midtjylland...

  6. Marketing Study for a New Mobile Application

    OpenAIRE

    Latvala, Jani

    2015-01-01

    Hundreds of mobile applications, apps, are released every day and it is hard to get users for new app without marketing. The purpose of this thesis was to find out what kind of marketing is useful for new mobile application and thus help author of this study to create global marketing communications plan for his new mobile app. Studying the marketing theory from mobile apps’ point of view and researching how some successful mobile apps were marketed at the beginning helped to find out ide...

  7. Application of Radiothermoluminescence to Area Dosimetry in the Event of a Nuclear Accident Covering a Wide Area

    International Nuclear Information System (INIS)

    Although numerous systems have been studied and developed for providing γ-ray dosimetry at nuclear facilities in the event of an accident, very few of them are really satisfactory as regards their physical characteristics or the practical conditions under which they are applied. Most of them are not completely insensitive to neutrons and the response has to be corrected if the dose is to be evaluated with accuracy. This presupposes, inter alia, that the incident neutron spectrum is known, since the corrections that have to be made vary with the neutron energy. In most cases the systems require fairly large financial investment and some of them have to be regularly renewed (photographic dosimeters). We considered the possibility of using thermoluminescent materials to make an inexpensive dosimeter possessing low neutron sensitivity. Our choice fell on corundum, which is manufactured industrially and is available on the market at low cost. We analysed the radiothermoluminescent characteristics of the corundum selected by us and compared them to those of commercial lithium fluoride. We determined the practical conditions under which this material can be used. We advocate its use both for area dosimetry at nuclear facilities where there is potential risk of strong irradiation and for problems involving civil defence. (author)

  8. Combining remote ablation cutting and remote welding: opportunities and application areas

    Science.gov (United States)

    Musiol, Jan; Luetke, Matthias; Schweier, Markus; Hatwig, Jens; Wetzig, Andreas; Beyer, Eckhard; Zaeh, Michael F.

    2012-03-01

    Remote Ablation Cutting (RAC) is a most promising process for cutting thin metal sheets in the automotive, medical and consumer industry. Characteristically for the RAC are high cutting velocities for metal foils as well as material processing of box structures without spatter contamination at the inner surface. Furthermore, the system technology for RAC can also be used for other processes, like welding and marking. Thereby, the flexibility of a production unit is increased, compared to a conventional cutting system. Despite several advantages, the RAC is not yet state of the art in industrial production. Reasons for that are lacking knowledge in the area of process itself and in possible application areas. In this paper a conceptual model of the ablation and the ejection mechanism is presented. It consists of the laser beam absorption within the processing zone, the melt ejection from the kerf and the resulting spatter formation above the part surface. Besides the model, the process boundaries and limitations are identified using empirical data. Addressing possible applications, the following samples of different industrial areas are introduced to show the potential of the process: Cutting of heat exchanger plates, cylinder head seals, and cathode/anode material for Li-Ion-Batteries. Furthermore, a concept and first results of the combined processing of remote cutting and welding with one laser and one scanner optics are presented.

  9. K-Area and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report

    International Nuclear Information System (INIS)

    During fourth quarter 1992, samples from the three monitoring wells at the K-Area site (KSS series) and the three monitoring wells at the Par Pond site (PSS series) were analyzed for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13, 173 and for other constituents as part of the Savannah River Site (SRS) Groundwater Monitoring Program. This report describes monitoring results that exceeded the final Primary Drinking Water Standards (PDWS) or the SRS flagging criteria. During fourth quarter 1992, no constituents analyzed exceeded the PDWS or the SRS Flag 2 criteria at the K-Area and Par Pond Sewage Sludge Application Sites. In the KSS well series, the field measurement for alkalinity ranged as high as 26 mg/L in well KSS 1D. Alkalinity measurements were zero in the PSS wells. Historical and current water-level elevations at the K-Area and Par Pond Sewage Sludge Application Site indicate that the groundwater flow directions are south to southwest (SRS grid coordinates)

  10. Earthquake Monitoring and Study in the Jingpohu Volcano Cluster Area

    Institute of Scientific and Technical Information of China (English)

    Liu Zhi; Duan Yonghong; Xu Zhaofan; Yuan Qinxi; Yang Jian; Zhou Xuesong

    2008-01-01

    Seismicity in the Jingpohu volcanic area was investigated based on the seismic data recorded by the mobile seismic network consisting of 14 stations equipped with 24-bit broad-band 3- component seismographs around Crater Forest. Results show that there appears certain seismicity in Jingpohu and its adjacent areas with a low activity level and most of the recorded earthquakes are the volcanic-tectonic ones. The results of location indicate a dominant focal depth of 10km - 30km, most of the earthquakes are smaller than ML>2.0, and are concentrated in the area of "Crater Forest" and on the Dunhua-Mishan fault which runs through the volcanic area. At station No.2, which has better observation conditions, two types of events, likely associated to volcanism, were recorded; their waveform characteristics are somewhat similar to that of the long-period volcanic event and the volcanic tremor, but with different feature of frequencies.

  11. Child Labor in Pakistan: A Study of the Lahore Area.

    Science.gov (United States)

    Ahmed, Mian Aftab

    1991-01-01

    Child labor is exceptionally extensive in Pakistan. An interview survey in the Lahore area documented the magnitude, causes, and effects of child labor. Steps for fighting this problem are recommended. (BC)

  12. 40 CFR Table 1 to Subpart Ddddddd... - Applicability of General Provisions to Prepared Feeds Manufacturing Area Sources

    Science.gov (United States)

    2010-07-01

    ... Prepared Feeds Manufacturing Area Sources 1 Table 1 to Subpart DDDDDDD of Part 63 Protection of Environment... Pollutants for Area Sources: Prepared Feeds Manufacturing Pt. 63, Subpt. DDDDDDD, Table 1 Table 1 to Subpart DDDDDDD of Part 63—Applicability of General Provisions to Prepared Feeds Manufacturing Area Sources...

  13. Identifying sensitive areas on intercultural contacts: An exploratory study

    OpenAIRE

    Ignacio Ramos-Vidal

    2011-01-01

    This paper analyzes the negative influence that cultural friction areas can promote on intercultural contacts. First, we expose the critical incident method like cross-cultural training model (Arthur, 2001). Then we show the negative effects that sensitive cultural zones can exert on the formation of prejudices and stereotypes about culturally diverse groups, analyzing 77 critical incidents collected in two different formative contexts. The main cultural shock areas detected are a) intercultu...

  14. A Fundamental Study on Area Traffic Control System

    OpenAIRE

    HONDA, Yoshiaki

    1992-01-01

    To save traffic congestion, this report aims at the area traffic control which increasesarea. traffic capacity without expansion of traffic facilities. This method is called AREATRAFFIC CONTROL SYSTEM.Optimum solutions for the area control system are obtained by the use of operationsresearch method. But above calculation time takes too long to fit this optimumregulation to present traffic pattern.In this report, optimization is made by the approximate solution which is composedof the first op...

  15. Ecological studies of small vertebrates in Pu-contaminated study areas of NTS and TTR

    International Nuclear Information System (INIS)

    Ecological studies of vertebrates in plutonium-contaminated areas of the Nevada Test Site (NTS) were initiated in March 1972, and have continued to date. In September 1973, standard census methods were also employed to derive a qualitative and quantitative inventory of vertebrate biota of four Nevada Applied Ecology Group (NAEG) study areas of the Tonopah Test Range (TTR). A checklist of vertebrates of NAEG study areas of NTS and TTR is presented. Data are presented on vertebrate composition, relative abundance, and seasonal status in the study areas. Concentrations of 239Pu and 241Am were determined in pelt or skin, GI tract, and carcass of 13 lizards and 16 mammals resident on Clean Slate 2, TTR, and Area 11, NTS. A total of 71 animals were collected for radioanalysis. However, the data were not available at the time this report was written. Pu tissue burdens were highest in lizards from Area 11 GZ. Maximum values obtained in nCi/g ash were 30.9, 42.2, and 0.43 for the pelt, GI tract, and carcass, respectively. Maximum 239Pu values in tissues of small rodents from Area 11 (not from GZ) were 11.4, 6.49, and 0.20 nCi/g ash for pelt, GI tract, and carcass, respectively. Pu/Am ratios were relatively consistent in tissue samples of lizards and small mammals from Area 11 (approximately 6:1, Pu/Am). Pu/Am ratios were not consistent in vertebrates of Clean Slate 2, TTR, and appeared to be lower in carcass (28:1, Pu/Am in mammals) than GI tract (9:1, Pu/Am in mammals). Although this trend was more conspicuous in mammals, it was also evident in reptiles. (auth)

  16. Consumer nueroscience: a new area of study for biomedical engineers.

    Science.gov (United States)

    Babiloni, Fabio

    2012-01-01

    In scientific literature, the most accepted definition of consumer neuroscience or neuromarketing is that it is a field of study concerning the application of neuroscience methods to analyze and understand human behavior related to markets and marketing exchanges. First, it might seem strange that marketers would be interested in using neuroscience to understand consumer's preferences. Yet in practice, the basic goal of marketers is to guide the design and presentation of products in such a way that they are highly compatible with consumer preferences. To understand consumers preferences, several standard research tools are commonly used by marketers, such as personal interviews with the consumers, scoring questionnaries gathered from consumers, and focus groups. The reason marketing researchers are interested in using brain imaging tools instead of simply asking people for their preferences in front of marketing stimuli, arises from the assumption that people cannot (or do not want to) fully explain their preference when explicitly asked. Researchers in the field hypothesize that neuroimaging tools can access information within the consumer's brain during the generation of a preference or the observation of a commercial advertisement. The question of will this information be useful in further promoting the product is still up for debate in marketing literature. From the marketing researchers point of view, there is a hope that this body of brain imaging techniques will provide an efficient tradeoff between costs and benefits of the research. Currently, neuroscience methodology includes powerful brain imaging tools based on the gathering of hemodynamic or electromagnetic signals related to the human brain activity during the performance of a relevant task for marketing objectives. These tools are briefly reviewed in this article. PMID:22678835

  17. Integration of geophysical datasets by a conjoint probability tomography approach: application to Italian active volcanic areas

    Directory of Open Access Journals (Sweden)

    D. Patella

    2008-06-01

    Full Text Available We expand the theory of probability tomography to the integration of different geophysical datasets. The aim of the new method is to improve the information quality using a conjoint occurrence probability function addressed to highlight the existence of common sources of anomalies. The new method is tested on gravity, magnetic and self-potential datasets collected in the volcanic area of Mt. Vesuvius (Naples, and on gravity and dipole geoelectrical datasets collected in the volcanic area of Mt. Etna (Sicily. The application demonstrates that, from a probabilistic point of view, the integrated analysis can delineate the signature of some important volcanic targets better than the analysis of the tomographic image of each dataset considered separately.

  18. Photon counting pixel and array in amorphous silicon technology for large area digital medical imaging applications

    Science.gov (United States)

    Yazdandoost, Mohammad Y.; Shin, Kyung W.; Safavian, Nader; Taghibakhsh, Farhad; Karim, Karim S.

    2010-04-01

    A single photon counting Voltage Controlled Oscillator (VCO) based pixel architecture in amorphous silicon (a-Si) technology is reported for large area digital medical imaging. The VCO converts X-ray generated input charge into an output oscillating frequency signal. Experimental results for an in-house fabricated VCO circuit in a-Si technology are presented and external readout circuits to extract the image information from the VCO's frequency output are discussed. These readout circuits can be optimized to reduce the fixed pattern noise and fringing effects in an imaging array containing many such VCO pixels. Noise estimations, stability simulations and measurements for the fabricated VCO are presented. The reported architecture is particularly promising for large area photon counting applications (e.g. low dose fluoroscopy, dental computed tomography (CT)) due to its very low input referred electronic noise, high sensitivity and ease of fabrication in low cost a-Si technology.

  19. FANN-Based Surface Water Quality Evaluation Model and Its Application in the Shaoguan Area

    Institute of Scientific and Technical Information of China (English)

    YANG Meini; LI Dingfang; YANG Jinbo; XIONG Wei

    2007-01-01

    A fuzzy neural network model is proposed to evaluate water quality. The model contains two parts: first, fuzzy mathematics theory is used to standardize the samples; second, the RBF neural network and the BP neural network are used to train the standardized samples. The proposed model was applied to assess the water quality of 16 sections in 9 rivers in the Shaoguan area in 2005. The evaluation result was compared with that of the RBF neural network method and the reported results in the Shaoguan area in 2005. It indicated that the performance of the proposed fuzzy neural network model is practically feasible in the application of water quality assessment and its operation is simple.

  20. Design of Rectangular Stepped DRA for Wireless Local Area Network (Wlan Applications

    Directory of Open Access Journals (Sweden)

    Chinmaya Sahoo, P. K. Sahu, S. K. Behera

    2013-03-01

    Full Text Available In this paper, a dielectric resonator antenna (DRAis presented for wireless local area network (WLANapplications. Here three rectangular dielectricresonators are used as stepped manner. The DRA isexcited by microstrip line which is an effective feedmechanism to obtain better radiation.In this design,rectangular shape was used as the dielectricresonator as it offers more option to control theresonant frequency.Simulated results show thatDRA array has a better resonant frequency for DRheight, hr = 1mm each and micro strip line fed byat-5.5 mm . Theretune loss is 15.0dBi,directivityachieves 6.2 dBi and the gainof6.48dBi at 5.5Ghzfrequency. The proposed design is suitableforWireless Local Area Network (WLAN IEEE802.11standardapplications&HIPERLAN (high-performance radio LAN applications which operateat 5.15 GHz to 5.50 GHz.

  1. Wavy channel Thin Film Transistor for area efficient, high performance and low power applications

    KAUST Repository

    Hanna, Amir

    2014-06-01

    We report a new Thin Film Transistor (TFT) architecture that allows expansion of the device width using wavy (continuous without separation) fin features - termed as wavy channel (WC) architecture. This architecture allows expansion of transistor width in a direction perpendicular to the substrate, thus not consuming extra chip area, achieving area efficiency. The devices have shown for a 13% increase in the device width resulting in a maximum 2.4x increase in \\'ON\\' current value of the WCTFT, when compared to planar devices consuming the same chip area, while using atomic layer deposition based zinc oxide (ZnO) as the channel material. The WCTFT devices also maintain similar \\'OFF\\' current value, similar to 100 pA, when compared to planar devices, thus not compromising on power consumption for performance which usually happens with larger width devices. This work offers a pragmatic opportunity to use WCTFTs as backplane circuitry for large-area high-resolution display applications without any limitation any TFT materials.

  2. Atmospheric Chemistry in Existing Air Atmospheric Dispersion Models and Their Applications: Trends, Advances and Future in Urban Areas in Ontario, Canada and in Other Areas of the World

    Directory of Open Access Journals (Sweden)

    Barbara Laskarzewska

    2009-03-01

    Full Text Available Air quality is a major concern for the public. Therefore, the reliability in modeling and predicting the air quality accurately is of a major interest. This study reviews existing atmospheric dispersion models, specifically, the Gaussian Plume models and their capabilities to handle the atmospheric chemistry of nitrogen oxides (NOx and sulfur dioxides (SO2. It also includes a review of wet deposition in the form of in-cloud, below cloud, and snow scavenging. Existing dispersion models are investigated to assess their capability of handling atmospheric chemistry, specifically in the context of NOx and SO2 substances and their applications to urban areas. A number of previous studies have been conducted where Gaussian dispersion model was applied to major cities around the world such as London, Helsinki, Kanto, and Prague, to predict ground level concentrations of NOx and SO2. These studies demonstrated a good agreement between the modeled and observed ground level concentrations of NOx and SO2. Toronto, Ontario, Canada is also a heavily populated urban area where a dispersion model could be applied to evaluate ground level concentrations of various contaminants to better understand the air quality. This paper also includes a preliminary study of road emissions for a segment of the city of Toronto and its busy streets during morning and afternoon rush hours. The results of the modeling are compared to the observed data. The small scale test of dispersion of NO2 in the city of Toronto was utilized for the local hourly meteorological data and traffic emissions. The predicted ground level concentrations were compared to Air Quality Index (AQI data and showed a good agreement. Another improvement addressed here is a discussion on various wet deposition such as in cloud, below cloud, and snow.

  3. Application of artificial radioisotopes in hydrological studies

    International Nuclear Information System (INIS)

    In this article, various applications of the artificial radioisotopes in surface water and groundwater investigations are briefly reviewed with a few recent case studies. They are found to be extremely useful in understanding the hydrological processes and obtaining pertinent parameters such as dilution factors, dispersion coefficients, rate of sediment transport in surface waters and recharge rate, velocity and flow direction in groundwater systems. (author)

  4. Preliminary study of pur-revetment's application

    NARCIS (Netherlands)

    Gu, D.; Verhagen, H.J.; Van de Ven, M.

    2008-01-01

    PUR-revetment is a newly developed method for hydraulic application. Its structure is similar to that of open stone asphalt revetment, but the crushed stones are glued by polyurethane (PUR) instead of bitumen. To study the feasibility of applying PUR-revetment, a research based on the comparisons be

  5. K-Area and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report. First quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13,173 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. During first quarter 1993, no permit-required constituents exceeded standards at the two sites except iron, which was elevated in one KSS well and two PSS wells. Aluminum, not required by the permit, was the only other constituent that exceeded standards. Elevated levels of aluminum and iron at these two sites may be concurrent with a change in analytical methodology. As in previous quarters, chlordane concentrations did not exceed the detection limit in any of the wells.

  6. Areas of applicability of kinematic and dynamic theories of parametric x-ray radiation

    International Nuclear Information System (INIS)

    The areas of applicability of kinematic and dynamic theories of parametric X-ray radiation (PXR) of relativistic particles in a crystal are considered. It is shown that dynamic diffraction of the PXR is possible in crystallographic planes with low Miller indexes in the central part of the PXR reflection only, where the PXR yield is weak and masked by other kinds of diffracted radiation. Therefore the properties of the PXR reflection are well described by the kinematic PXR theory. Results of the analysis are compared to experimental data

  7. Application of SOI Area Detectors to Synchrotron Radiation X-ray Experiments

    CERN Document Server

    Hashimoto, Ryo; Kumai, Reiji; Kishimoto, Shunji

    2015-01-01

    Application of new detectors using Silicon-On-Insulator (SOI) technology has been started in the Photon Factory, KEK. This project has two purposes. The first purpose is to develop a pulse-counting-type X-ray detector which can be used in synchrotron soft X-ray experiments. The second one is to apply the SOI area detector developed by RIKEN, SOPHIAS, to X-ray diffraction and small-angle scattering experiments in Photon Factory. In this paper, we introduce the current status of our project.

  8. THE REMOTE AND MOBILE AIR TRAFFIC CONTROL TOWER AND ITS POSSIBLE APPLICATION TO THE OPERATIONAL AREA

    Directory of Open Access Journals (Sweden)

    Tímea VAS

    2014-10-01

    Full Text Available The concept of remote and mobile Air Traffic Control Tower (ATC TWR and its development has started in Europe, Australia and also in the USA, in order to improve the efficiency of Air Traffic Management (ATM systems in terms of air transportation safety. These new technologies are applicable in many countries in peace time, but on mobility reasons these are promoted to achieve commitments in the operational area. This article describes the devices and range of equipment of mobile and remote tower, and their specifications, which can even serve a medium sized airport, furthermore examines, whether how can those provide the air traffic services at an operational airfield.

  9. 3.1.SUIT. Draft EA procedure applicable to historical areas active conservation

    DEFF Research Database (Denmark)

    Algreen-Ussing, Gregers; Wedebrunn, Ola

    2002-01-01

    intended as a way to propose and ensure an active conservation policy for urban historical areas. It is based on state-of-the-art methods and the knowledge of the experts involved in the SUIT project. It is also based on the guidelines presenting the grid of analysis to be used by stakeholders in a joint...... conflict analysis with examples and guidance, the decision-matrix of tools and methodologies as well as the preminiary EU cross-comparison of EIA application. The procedure suggested in this report is phrased according to the requirements expressed in the Directive 85/337/EEC asamended by Directive 97...

  10. Neutron activation analysis challenges. Problems and applications in biomedical and other areas

    International Nuclear Information System (INIS)

    Developments in neutron activation analysis in its various modes for trace element determination are described with reference to reactor and other neutron sources, competing methods, tomography and detection systems. A selected number of areas of application are highlighted which provide challenges into the next millennium and to which a useful and in some cases a unique contribution can be made. The role that neutron activation analysis can play in decommissioning, landmine detection, boron neutron capture therapy, Alzheimer's disease, diabetes mellitus, the complex mechanisms of initiation and termination of feeding and obesity as well as in scar formation and the requirements for artificial skin are presented. (author)

  11. Neutron activation analysis challenges: Problems and applications in biomedical and other areas

    International Nuclear Information System (INIS)

    Developments in neutron activation analysis in its various modes for trace element determination are described with reference to reactor and other neutron sources, competing methods, tomography and detection systems. A selected number of areas of applications are highlighted which provide challenges into the next millennium and to which a useful and in some cases a unique contribution can be made. The role that neutron activation analysis can play in decommissioning, land mine detection, born neutron capture therapy, Alzheimer disease, diabetes mellitus, the complex mechanisms of initiation and termination of feeding and obesity as well as in scar formation and the requirements for artificial skin are presented. (author)

  12. Applications of ERTS imagery to mappings sediments of the Twin Cities Metropolitan area

    Science.gov (United States)

    Poppe, J. R.

    1975-01-01

    ERTS images were compared to surficial geologic maps, prepared through traditional field studies. Lithologic boundaries, bedrock outcrops, bedrock structures, and geomorphologic features were examined. An area southeast of the Twin Cities, located chiefly in northern Dakota County was studied, as well as the New Brighton 15-minute quadrangle located in portions of Ramsey and Anoka Counties. Visual comparison of geologic maps and ERTS imagery demonstrated the limitations of this approach to geological investigations. Bedrock outcrops and bedrock structure in the metropolitan area do not appear on ERTS imagery. However, certain glacial sediments can be identified and are potentially mappable. Certain geomorphological features were also discernable.

  13. Preliminary chemical quality study in the Manhattan Beach area, California

    Science.gov (United States)

    Brennan, Robert

    1956-01-01

    In 1904 Mendenhall (1905) made a survey of the ground water conditions in southern California. At the time of his survey the piezometric surface in the area was above sea level, but since that time water levels have declined. During the 1920's, years of rapid development, the water levels declined at an increasing rate. However, because of decreased pumping during the depression years of the 1930's, the levels tended to recover somewhat. During the war years of the 1940's, a large expansion of industry occurred in the area, and ground water withdrawals greatly increased. By 1945 water levels in some areas had declined as much as 70 feet below sea levels In the coastal region this heavy withdrawal and the ensuing dry years rapidly lowered the ground water levels, reversing the normal seaward flow of the underground water to a landward flow.

  14. PUREX Plant aggregate area management study technical baseline report

    International Nuclear Information System (INIS)

    The PUREX aggregate area is made up of six operable units; 200-PO-1 through 200-PO-6 and consists of liquid and solid waste disposal sites in the vicinity of, and related to, PUREX Plant operations. This report describes PUREX and its waste sites, including cribs, french drains, septic tanks and drain fields, trenches and ditches, ponds, catch tanks, settling tanks, diversion boxes, underground tank farms, and the lines and encasements that connect them. Each waste site in the aggregate area is described separately. Close relationships between waste units, such as overflow from one to another, are also discussed. This document provides a technical baseline of the aggregate area and results from an environmental investigation. This document is based upon review and evaluation of numerous Hanford Site current and historical reports, drawings and photographs, supplemented with site inspections and employee interviews. No intrusive field investigations or sampling were conducted

  15. Application of source-receptor models to determine source areas of biological components (pollen and butterflies

    Directory of Open Access Journals (Sweden)

    M. Alarcón

    2010-01-01

    Full Text Available The source-receptor models allow the establishment of relationships between a receptor point (sampling point and the probable source areas (regions of emission through the association of concentration values at the receptor point with the corresponding atmospheric back-trajectories, and, together with other techniques, to interpret transport phenomena on a synoptic scale. These models are generally used in air pollution studies to determine the areas of origin of chemical compounds measured at a sampling point, and thus be able to target actions to reduce pollutants. However, until now, few studies have applied these types of models to describe the source areas of biological organisms. In Catalonia there are very complete records of pollen (data from the Xarxa Aerobiològica de Catalunya, Aerobiology Network of Catalonia and butterflies (data from the Catalan Butterfly Monitoring Scheme, a biological material that is also liable to be transported long distances and whose areas of origin could be interesting to know. This work presents the results of the use of the Seibert et al. model applied to the study of the source regions of: (1 certain pollen of an allergic nature, observed in Catalonia and the Canary Islands, and (2 the migratory butterfly Vanessa cardui, observed in Catalonia. Based on the results obtained we can corroborate the suitability of these models to determine the area of origin of several species, both chemical and biological, therefore expanding the possibilities of applying the original model to the wider field of Aerobiology.

  16. Identifying sensitive areas on intercultural contacts: An exploratory study

    Directory of Open Access Journals (Sweden)

    Ignacio Ramos-Vidal

    2011-06-01

    Full Text Available This paper analyzes the negative influence that cultural friction areas can promote on intercultural contacts. First, we expose the critical incident method like cross-cultural training model (Arthur, 2001. Then we show the negative effects that sensitive cultural zones can exert on the formation of prejudices and stereotypes about culturally diverse groups, analyzing 77 critical incidents collected in two different formative contexts. The main cultural shock areas detected are a intercultural communication barriers, b gender roles, and c the cultural expressions statement. Strategies to improve the method validity are proposed.

  17. Tracer a application in marine outfall studies

    International Nuclear Information System (INIS)

    The applicability of radioactive and fluorescent tracers for field studies to predict or investigate waste water transport and dispersion from marine outfalls is evaluated. The application of either instantaneous or continuous tracer release, 'in situ' detection of tracers and data processing are considered. The necessity of a combined use of tracer techniques and conventional hydrographic methods for a statistical prediction of transport and dillution of waste water are pointed out. A procedure to determine an outlet distance from the coast, which satisfy bathing water criteria is outlined. (M.A.)

  18. Study on Rural Poverty in Ecologically Fragile Areas - A Case study of the Tibetan Areas in Sichuan Province

    OpenAIRE

    Lan, Hong-xing

    2012-01-01

    This article offers an overview of natural environment, economic development, and social development in the Tibetan areas in Sichuan Province. The major manifestations of the status quo of poverty in the Tibetan areas are as follows: there is a wide range of poverty and a large poor population; the poverty degree is high and it is difficult to alleviate poverty; the natural disasters are frequent and the phenomenon of poverty arising from disasters is serious. We analyze the factors responsib...

  19. On the application of DInSAR to deformation monitoring in desert areas

    Science.gov (United States)

    Chang, Xiao-Tao; Guo, Jin-Yun; Zhang, Yong-Hong; Wang, Xiao-Qing

    2011-03-01

    The DInSAR technique is used for monitoring the desert height changes to study sandstorms. Hunshandake Sandy Land, as the test area, is one of the main sources of sandstorms in Beijing. In order to study the sandstorm source and its impact, a pair of EnviSat ASAR images of Oct. 11, 2005, and Oct. 26, 2004, is processed on the basis of analysis of six ERS-2 and EnviSat radar images. After the image configuration, flat earth effect correction, data filtering, phase unwrapping, and geo-coding, a deformation model over Hunshandake desert is built. According to the results, the height decreased in most areas and increased in a few areas, which basically coincides with the strong sandstorm appearing in Beijing in the Spring of 2005. The results show DInSAR has an important role in monitoring of desert surface deformation.

  20. Wide area control concepts. A pre-study. Power transmission systems

    International Nuclear Information System (INIS)

    The aim of this pre-study has been to assess technology and benefits related to new control concepts for power transmission systems. The objective is to provide basic results and information in order to prepare a main project proposal for further research activities in this area. The study has focused on recent developments in control and monitoring of power transmission systems and describes promising applications within the areas of voltage stability, angle stability (power oscillations) and system protection. Selected case studies have been performed in order to assess the technical possibility of increasing power transfer limits on critical transmission corridors in the Norwegian power system and to indicate the economic benefits involved. The case studies have mainly focused on voltage stability monitoring and power oscillation damping. One significant result from the study is related to the power export capacity on the ''Hasle'' interface, which is the main transmission corridor between Southern Norway and Sweden. The studies indicate a potential of reducing annual congestion costs on this interface in the order of 15-20 mill. NOK. It is shown that this can be achieved by increasing the export limit to 2000 MW and that this is technically possible from a security point of view through improved control and monitoring as illustrated by the case studies. The report also includes a number of proposed research activities and a layout for a main project proposal. (Author)

  1. Interim report: biogeochemical studies at the Geysers Geothermal Area

    Energy Technology Data Exchange (ETDEWEB)

    Koranda, J.J.

    1979-10-12

    Field research at the Geysers Geothermal Area directed toward quantifying the deposition of trace elements known to be contained in the cooling tower drift is described briefly. Results from meteorological measurements, particle filtration, gas analysis of air, and a program of coordinated ecological measurements made at Unit 12 are listed. (MHR)

  2. Hydrocode studies of flows generated by large area fires

    International Nuclear Information System (INIS)

    The global computational approach to the simulation of the meso-scale motions generated by a large area fire is described. Existing hydrocode solutions are reviewed and ongoing calculations discussed. Assumptions applied in many hydrocode solutions are assessed, and modeling requirements based on recent analytical efforts are defined

  3. Air quality measurements in urban green areas - a case study

    Science.gov (United States)

    Kuttler, W.; Strassburger, A.

    The influence of traffic-induced pollutants (e.g. CO, NO, NO 2 and O 3) on the air quality of urban areas was investigated in the city of Essen, North Rhine-Westphalia (NRW), Germany. Twelve air hygiene profile measuring trips were made to analyse the trace gas distribution in the urban area with high spatial resolution and to compare the air hygiene situation of urban green areas with the overall situation of urban pollution. Seventeen measurements were made to determine the diurnal concentration courses within urban parks (summer conditions: 13 measurements, 530 30 min mean values, winter conditions: 4 measurements, 128 30 min mean values). The measurements were carried out during mainly calm wind and cloudless conditions between February 1995 and March 1996. It was possible to establish highly differentiated spatial concentration patterns within the urban area. These patterns were correlated with five general types of land use (motorway, main road, secondary road, residential area, green area) which were influenced to varying degrees by traffic emissions. Urban parks downwind from the main emission sources show the following typical temporal concentration courses: In summer rush-hour-dependent CO, NO and NO 2 maxima only occurred in the morning. A high NO 2/NO ratio was established during weather conditions with high global radiation intensities ( K>800 W m -2), which may result in a high O 3 formation potential. Some of the values measured found in one of the parks investigated (Gruga Park, Essen, area: 0.7 km 2), which were as high as 275 μg m -3 O 3 (30-min mean value) were significantly higher than the German air quality standard of 120 μg m -3 (30-min mean value, VDI Guideline 2310, 1996) which currently applies in Germany and about 20% above the maximum values measured on the same day by the network of the North Rhine-Westphalian State Environment Agency. In winter high CO and NO concentrations occur in the morning and during the afternoon rush-hour. The

  4. Mapping urban climate zones and quantifying climate behaviors - An application on Toulouse urban area (France)

    International Nuclear Information System (INIS)

    Facing the concern of the population to its environment and to climatic change, city planners are now considering the urban climate in their choices of planning. The use of climatic maps, such Urban Climate Zone-UCZ, is adapted for this kind of application. The objective of this paper is to demonstrate that the UCZ classification, integrated in the World Meteorological Organization guidelines, first can be automatically determined for sample areas and second is meaningful according to climatic variables. The analysis presented is applied on Toulouse urban area (France). Results show first that UCZ differentiate according to air and surface temperature. It has been possible to determine the membership of sample areas to an UCZ using landscape descriptors automatically computed with GIS and remote sensed data. It also emphasizes that climate behavior and magnitude of UCZ may vary from winter to summer. Finally we discuss the influence of climate data and scale of observation on UCZ mapping and climate characterization. - Highlights: → We proposed a method to map Urban Climate Zones and quantify their climate behaviors. → UCZ is an expert-based classification and is integrated in the WMO guidelines. → We classified 26 sample areas and quantified climate behaviors in winter/summer. → Results enhance urban heat islands and outskirts are surprisingly hottest in summer. → Influence of scale and climate data on UCZ mapping and climate evaluation is discussed. - This paper presents an automated approach to classify sample areas in a UCZ using landscape descriptors and demonstrate that climate behaviors of UCZ differ.

  5. Practical Application of GIS for the Identification and Selection of Control Areas in West Africa

    International Nuclear Information System (INIS)

    This paper builds further on the Geneva and Rome-Vienna workshops where past applications of GIS for priority setting were presented and some principles underlying the present paper were adopted. Trypanosomosis control aims at sustained suppression of the disease and / or the vector. Therefore decision-making will be mainly anthropocentric, i.e. daily farmers inputs and participation are the key stone of success for any operation (socio-economics of trypanosomosis control). Decision-making towards selecting priority areas can be carried out at a national or sub-national level where restricted priority areas are selected according to potential costs and benefits. The relative location in the fly belt of selected areas is of lesser importance. Vector eradication on the other hand is a political decision which aims at permanently removing a major constraint, in this case tsetse as a vector of African Animal Trypanosomosis and Human Sleeping Sickness. Independently of peoples' will to participate, areas have to be selected on a data driven basis. The key stone here is technical feasibility. Since the success of the actual eradication campaign will highly depend on the technology used, chosen technologies will have to be carried out by professional teams to guarantee quality and speed. Therefore community participation can focus on disease management (basic animal health and production sensu largo) and land-use topics. Here decision-making is highly dependant on concerted action between countries involved. Large scale areas have to be selected according to the feasibility of tsetse eradication, starting from the easiest parts at the distribution limits of the fly and systematically working towards more complex types of habitat.

  6. Reconfigurable antenna options for 2.45/5 GHz wireless body area networks in healthcare applications.

    Science.gov (United States)

    Abbas, Syed Muzahir; Ranga, Yogesh; Esselle, Karu P

    2015-01-01

    This paper presents electronically reconfigurable antenna options in healthcare applications. They are suitable for wireless body area network devices operating in the industrial, scientific, and medical (ISM) band at 2.45 GHz and IEEE 802.11 Wireless Local Area Network (WLAN) band at 5 GHz (5.15-5.35 GHz, 5.25-5.35 GHz). Two types of antennas are investigated: Antenna-I has a full ground plane and Antenna-II has a partial ground plane. The proposed antennas provide ISM operation in one mode while in another mode they support 5 GHz WLAN band. Their performance is assessed for body centric wireless communication using a simplified human body model. Antenna sensitivity to the gap between the antenna and the human body is investigated for both modes of each antenna. The proposed antennas exhibit a wide radiation pattern along the body surface to provide wide coverage and their small width (14 mm) makes them suitable for on-body communication in healthcare applications. PMID:26737528

  7. Application of irradiation in bait production to the control of crawling insects in urban areas

    Science.gov (United States)

    Migdał, W.; Owczarczyk, H. B.; Świ ȩtosławski, J.; Świ ȩtosławski, J.

    2000-03-01

    The efficiency and palatability of two baits were studied to the control of crawling insects in urban areas: "Cockroach Kill Gel" for control of cockroaches and Faratox B for control of ants. Ionizing energy was used in producing the baits. It was concluded, that after irradiation the palatability of Faratox B improved and palatability of Cockroach Kill Gel did not change.

  8. Application of irradiation in bait production to the control of crawling insects in urban areas

    International Nuclear Information System (INIS)

    The efficiency and palatability of two baits were studied to the control of crawling insects in urban areas: 'Cockroach Kill Gel' for control of cockroaches and Faratox B for control of ants. Ionizing energy was used in producing the baits. It was concluded, that after irradiation the palatability of Faratox B improved and palatability of Cockroach Kill Gel did not change

  9. Study of hybrid power system potential to power agricultural water pump in mountain area

    Science.gov (United States)

    Syuhada, Ahmad; Mubarak, Amir Zaki; Maulana, M. Ilham

    2016-03-01

    As industry and Indonesian economy grow fast, there are a lot of agricultural land has changed into housing and industrial land. This causes the agricultural land moves to mountain area. In mountainous agricultural area, farmers use the water resources of small rivers in the groove of the mountain to irrigate the farmland. Farmers use their power to lift up water from the river to their land which causes inefectivity in the work of the farmers. Farmers who have capital utilize pump to raise water to their land. The only way to use pump in mountain area is by using fuel energy as there is no electricity, and the fuel price in mountain area is very expensive. Based on those reasons it is wise to consider the exploration of renewable energy available in the area such as solar energy, wind energy and hybrid energy. This study analyses the potential of the application of hybrid power plant, which is the combination of solar and wind energy, to power agricultural pump. In this research, the data of wind speed and solar radiation are collected from the measurement of BMKG SMPK Plus Sare. Related to the solar energy, the photovoltaic output power calculation is 193 W with duration of irradiation of 5 hours/day. While for the wind energy, the output power of the wind turbine is 459.84 W with blade diameter of 3 m and blow duration of 7 hours/day. The power of the pump is 558 W with 8 hours of usage, and the water capacity is 2.520 liters/hour for farmland with the area of 15 ha. Based on the analysis result, the designed system will generate electricity of 3.210 kW/year with initial investment of US 14,938.

  10. RFID Applications: An Introductory and Exploratory Study

    CERN Document Server

    Ahsan, Kamran; Kingston, Paul

    2010-01-01

    RFID is not a new technology and has passed through many decades of use in military, airline, library, security, healthcare, sports, animal farms and other areas. Industries use RFID for various applications such as personal/vehicle access control, departmental store security, equipment tracking, baggage, fast food establishments, logistics, etc. The enhancement in RFID technology has brought advantages that are related to resource optimization, increased efficiency within business processes, and enhanced customer care, overall improvements in business operations and healthcare. Our research is part of a big project; its aim is to produce a model for mobile technology implementation of hospital patients' movement process. However, the focus of this paper is to explore the main RFID components, i.e. the tag, antenna and reader. The results of the investigations conducted on the three RFID components will be used to develop our research model.

  11. Status of the development of large area photon detectors based on THGEMs and hybrid MPGD architectures for Cherenkov imaging applications

    Science.gov (United States)

    Alexeev, M.; Birsa, R.; Bradamante, F.; Bressan, A.; Büchele, M.; Chiosso, M.; Ciliberti, P.; Torre, S. Dalla; Dasgupta, S.; Denisov, O.; Duic, V.; Finger, M.; Finger, M.; Fischer, H.; Giorgi, M.; Gobbo, B.; Gregori, M.; Herrmann, F.; Königsmann, K.; Levorato, S.; Maggiora, A.; Martin, A.; Menon, G.; Steiger, K.; Novy, J.; Panzieri, D.; Pereira, F. A.; Santos, C. A.; Sbrizzai, G.; Schiavon, P.; Schopferer, S.; Slunecka, M.; Sozzi, F.; Steiger, L.; Sulc, M.; Takekawa, S.; Tessarotto, F.; Veloso, J. F. C. A.; Makke, N.

    2016-07-01

    We report about the development status of large area gaseous single photon detectors based on a novel hybrid concept for RICH applications. The hybrid concept combines Thick Gaseous Electron Multipliers (THGEMs) coupled to CsI, working as a photon sensitive pre-amplification stage, and Micromegas, as a multiplication stage. The most recent achievements within the research and development programme consist in the assembly and study of 300 × 300mm2 hybrid photon detectors, the optimization of front-end electronics, and engineering towards large area detectors. Hybrid detectors with an active area of 300 × 300mm2 have been successfully operated in laboratory conditions and at a CERN PS T10 test beam, achieving effective gains in the order of 105 and good time resolution (σ = 7 ns); APV25 front-end chips have been coupled to the detector resulting in noise levels lower than 1000 electrons; the production and characterization of 300 × 600mm2 THGEMs is ongoing. A set of hybrid detectors with 600 × 600mm2 active area is envisaged to upgrade COMPASS RICH-1 at CERN in 2016.

  12. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construc...

  13. The design and application of large area intensive lens array focal spots measurement system

    Science.gov (United States)

    Chen, Bingzhen; Yao, Shun; Yang, Guanghui; Dai, Mingchong; Wang, Zhiyong

    2014-12-01

    Concentrating Photovoltaic (CPV) modules are getting thinner and using smaller cells now days. Correspondingly, large area intensive lens arrays with smaller unit dimension and shorter focal length are wanted. However, the size and power center of lens array focal spots usually differ from the design value and are hard to measure, especially under large area situation. It is because the machining error and deformation of material of the lens array are hard to simulate in the optical design process. Thus the alignment error between solar cells and focal spots in the module assembly process will be hard to control. Under this kind of situation, the efficiency of CPV module with thinner body and smaller cells is much lower than expected. In this paper, a design of large area lens array focal spots automatic measurement system is presented, as well as its prototype application results. In this system, a four-channel parallel light path and its corresponding image capture and process modules are designed. These modules can simulate focal spots under sunlight and have the spots image captured and processed using charge coupled devices and certain gray level algorithm. Thus the important information of focal spots such as spot size and location will be exported. Motion control module based on grating scale signal and interval measurement method are also employed in this system in order to get test results with high speed and high precision on large area lens array no less than 1m×0.8m. The repeatability of the system prototype measurement is +/-10μm with a velocity of 90 spot/min. Compared to the original module assembled using coordinates from optical design, modules assembled using data exported from the prototype is 18% higher in output power, reaching a conversion efficiency of over 31%. This system and its design can be used in the focal spot measurement of planoconvex lens array and Fresnel lens array, as well as other kinds of large area lens array application

  14. Statistical study of epicentre alignment in the broader Aegean area

    Directory of Open Access Journals (Sweden)

    E. Papadirnitriou

    1994-06-01

    Full Text Available Accurate data concerning shallow (h = 60 km earthquakes (Ms =4.5 that occurred in the broader Aegean area are used to point out the presence of linear seismogenic structures (seismolineaments. The earthquake data were analyzed by the use of a specific algorithm, and the directions of the best alignment of epicentres were found. The algorithm is based on statistical criteria applied within a circular area with the aim of searching for the best direction of alignment; this is then tested, to discriminate whether or not the pattern could stem from a random distribution of epicentres, or whether it is effectively the result of a linear seismic structure; the procedure is repeated to cover the whole area examined. The resulting lineaments can be regarded as individual tectonic units, as they usually coincide with known active faults or fault systems. An interpretation is given of the spatio-temporal evolution of the seismicity along the lineaments in terms of the asperity model.

  15. B Plant aggregate area management study technical baseline report

    International Nuclear Information System (INIS)

    The B aggregate area is made up of 13 operable units; 200-BP 1 through 200-BP 1 1, 200-IU-6, and 200-SS-1 that consist of liquid and solid waste disposal sites in the vicinity of, and related to, B Plant operations. This report describes B Plant and its waste sites, including cribs, french drains, septic tanks and drain fields, trenches and ditches, ponds, catch tanks, settling tanks, diversion boxes, underground tank farms designed for high-level liquid wastes, and the lines and encasements that connect them. Each waste site in the aggregate area is described separately. Close relationships between waste units, such as overflow from one to another, are also discussed. This document provides a technical baseline of the aggregate area and results from an environmental investigation. This document is based upon review and evaluation of numerous Hanford Site current and historical reports, drawings and photographs, supplemented with site inspections and employee interviews. No intrusive field investigations or sampling were conducted

  16. Web Application for Coastal Area Planning through Analysis of Landslide and Soil Consumption

    Science.gov (United States)

    Panizzoni, Giulio; Debiasi, Alberto; Eccher, Matteo; De Amicis, Raffaele

    2016-04-01

    Global warming and rapid climatic changes are producing dramatic effects on coastal area of Mediterranean countries. Italian coastal areas are one of the most urbanized zones of the south western Europe and the extensive use of soil is causing a consistent impact on the hydrogeological context. Moreover, soil consumption combined with extreme meteorological events, facilitates the occurrence of hazardous landslide events. Environmental policy makers and data managers in territorial planning need to face such emergency situation with appropriate tools. We present an application service with the aim of advising user through environmental analysis of Landslide and Soil Consumption impact. This service wants also to improve the sharing of environmental harmonized datasets/metadata across different organizations and the creation of a collaborative environment where the stakeholders and environmental experts can share their data and work cooperatively. We developed a set of processing services providing functionalities to assess impact of landslide on territory and impact of land take and soil sealing. Among others, the service is able to evaluate environmental impacts of landslide events on Cultural Heritage sites. We have also designed a 3D WebGL client customized to execute the processing services and visualize their outputs. It provides high usability in terms of navigation and data visualization. In this way the service provides not only a Spatial Data Infrastructure to access and visualize data but a complete Decision Support Systems for a more effective environmental planning of coastal area.

  17. State waste discharge permit application 400 Area secondary cooling water. Revision 2

    International Nuclear Information System (INIS)

    This document constitutes the Washington Administrative Code 173-216 State Waste Discharge Permit Application that serves as interim compliance as required by Consent Order DE 91NM-177, for the 400 Area Secondary Cooling Water stream. As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site that affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 of the Washington Administrative Code, the State Waste Discharge Permitting Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order DE 91NM-177. The Consent Order DE 91NM-177 requires a series of permitting activities for liquid effluent discharges. Based upon compositional and flow rate characteristics, liquid effluent streams on the Hanford Site have been categorized into Phase 1, Phase 2, and Miscellaneous streams. This document only addresses the 400 Area Secondary Cooling Water stream, which has been identified as a Phase 2 stream. The 400 Area Secondary Cooling Water stream includes contribution streams from the Fuels and Materials Examination Facility, the Maintenance and Storage Facility, the 481-A pump house, and the Fast Flux Test Facility

  18. Developments of large-area APD arrays for future applications to PET technology

    International Nuclear Information System (INIS)

    Silicon avalanche photodiodes (APD) are solid-state devices which have internal gain. Since the good features of both photodiodes (PDs) and photomultiplier tubes (PMTs) are shared in a single device, APD offers new design for physics experiments and devices for nuclear medicine. In particular, thanks to its high quantum efficiency (QE) and low noise, reverse-type APDs generally show much better energy resolution than traditional PMTs when coupled to various scintillators. Most recently, we have developed various large area reverse-type APDs with Hamamatsu Photonics, up to 32 x 32 mm2 square area. Such large dimensions have been awaited by researchers world-wide, and further extend the potential of APDs for various application such as in space science and nuclear medicine. For example, the use of APDs in space experiments is now validated thanks to successful launch of the Cute 1.7+APD II, which has measured both electron/proton distributions in Low Earth Orbit at E >9 keV. Moreover, the mission successfully demonstrated an active gain control system to keep the APD gain stable under moderate temperature variations. In other aspects, an APD is a compact, high performance light sensor that could be used in the strong magnetic field MRIs. An ultimate spatial resolution as better as sub-mm will be possible by adopting small pixel, high density APD pixels. Future PET detectors with time-of-flight (TOF) capability may be expected thanks to very fast time response of the APD devices. As a first step, we have developed a versatile APD-based positron emission tomography (PET) modules for future applications in high resolution, fast medical imaging. We will also discuss future use of digital (Geiger-mode) APDs, such as multi-pixel photon counter (MPPCs) in similar medical imaging applications. (author)

  19. Autonomous distributed temperature sensing for long-term heated applications in remote areas

    Directory of Open Access Journals (Sweden)

    A.-M. Kurth

    2013-02-01

    Full Text Available Distributed temperature sensing (DTS is a fiber-optical method enabling simultaneous temperature measurements over long distances. Electrical resistance heating of the metallic components of the fiber-optic cable provides information on the thermal characteristics of the cable's environment, providing valuable insight into processes occurring in the surrounding medium, such as groundwater–surface water interactions, dam stability or soil moisture. Until now, heated applications required direct handling of the DTS instrument by a researcher, rendering long-term investigations in remote areas impractical due to the often difficult and time-consuming access to the field site. Remote control and automation of the DTS instrument and heating processes, however, resolve the issue with difficult access. The data can also be remotely accessed and stored on a central database. The power supply can be grid independent, although significant infrastructure investment is required here due to high power consumption during heated applications. Solar energy must be sufficient even in worst case scenarios, e.g. during long periods of intense cloud cover, to prevent system failure due to energy shortage. In combination with storage batteries and a low heating frequency, e.g. once per day or once per week (depending on the season and the solar radiation on site, issues of high power consumption may be resolved. Safety regulations dictate adequate shielding and ground-fault protection, to safeguard animals and humans from electricity and laser sources. In this paper the autonomous DTS system is presented to allow research with heated applications of DTS in remote areas for long-term investigations of temperature distributions in the environment.

  20. Generating a quality management system for application in the field of management of nuclear energy area

    International Nuclear Information System (INIS)

    The actual work has as a main objective to present the development of a quality management system to be applicable to the Nuclear Energy Management confines at the National Atomic Energy Commission (CNEA) in Argentina Republic. The GAEN Quality Management Section (SGC) has as main central tasks to streamline, collaborate and facilitate the development of activities and their applications on quality management systems in all the sections and projects belonging to GAEN. This achievement will tend to accredit, certificate and qualify them. Groups of work cooperating with each other integrate the GAEN. They are at present dealing with several tasks. Some outstanding ones are research activities, technology development, design, engineering, assembling, starting, services, and human resources development on Nuclear Reactors and Nuclear Supplies, particularly on powerful nuclear reactors. In 2012, at the annual CNEA Presidential meeting, it was presented one of the several projects from the SGC. It consists in the development of a quality management system available to every area belonging to the GAEN. To carry this project out, it was first begun with the elaboration of Guide Documents which were available for everybody. The documents establish the criteria and general requirements for obtaining guaranteed quality results about the performed activities. At the same time, several areas, sections and Management groups of work have been working united and well-disposed towards the application on their own Management System using the Guide Documents and considering, in addition, some own regards. In conclusion, this first step shows that the developed work facilitates the implementation of Management Systems around the GAEN. (author)

  1. Autonomous distributed temperature sensing for long-term heated applications in remote areas

    Directory of Open Access Journals (Sweden)

    A.-M. Kurth

    2012-10-01

    Full Text Available Distributed Temperature Sensing (DTS is a fiber-optical method enabling simultaneous temperature measurements over long distances. Electrical resistance heating of the metallic components of the fiber-optic cable provides information on the thermal characteristics of the cable's environment, providing valuable insight into processes occurring in the surrounding medium, such as groundwater-surface water interactions, dam stability or soil moisture. Until now, heated applications required direct handling of the DTS instrument by a researcher, rendering long-term investigations in remote areas impractical due to the often difficult and time-consuming access to the field site. Remote-control and automation of the DTS instrument and heating processes, however, resolve the issue with difficult access. The data can also be remotely accessed and stored on a central database. The power supply can be grid-independent, although significant infrastructure investment is required here due to high power consumption during heated applications. Solar energy must be sufficient even in worst case scenarios, e.g. during long periods of intense cloud cover, to prevent system failure due to energy shortage. In combination with storage batteries and a low heating frequency, e.g. once per day or once per week (depending on the season and the solar radiation on site, issues of high power consumption may be resolved. Safety regulations dictate adequate shielding and ground-fault protection, to safeguard animals and humans from electricity and laser sources. In this paper the autonomous DTS system is presented to allow research with heated applications of DTS in remote areas for long-term investigations of temperature distributions in the environment.

  2. Secure Application-Aware Service Differentiation in Public Area Wireless Networks

    Institute of Scientific and Technical Information of China (English)

    Weisong Shi; Sharun Santhosh; Hanping Lufei

    2005-01-01

    We are witnessing the increasing demand for pervasive Internet access from public area wireless networks (PAWNs). As their popularity grows, the inherent untrusted nature of public places and the diverse service requirements of end users are two key issues that need to be addressed. We have proposed two approaches to address these issues. First,the Home-based Authentication Protocol (HAP) that provides a framework by which to establish trust between a nomadic client and a service provider using a trusted third party (home). Second, we argue that the best-effort-based service model provided by many access points is not enough to satisfy the end user fairness and to maximize the wireless link utilization for a diverse user population. We have proposed an application-aware service differentiation (AASD) mechanism that takes both application semantics and user requirements into consideration. Our analysis of this framework shows several fruitful results. The total authentication latency increases with the number of clients but at a rate that is much less than linear increasing latency. Also, in comparison with two other bandwidth allocation approaches, the best effort and static access control, our proposed application-aware service differentiation method, outperforms them in terms of the client fairness and wireless bandwidth utilization.

  3. Salt Creek : A wilderness study area on the Bitter Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Bitter Lake National Wildlife Refuge. It discusses the history of the study area, its...

  4. Radiochromic dye film studies for brachytherapy applications.

    Science.gov (United States)

    Martínez-Dávalos, A; Rodríguez-Villafuerte, M; Díaz-Perches, R; Arzamendi-Pérez, S

    2002-01-01

    Commercial radiochromic dye films have been used in recent years to quantify absorbed dose in several medical applications. In this study we present the characterisation of the GafChromic MD-55-2 dye film, a double sensitive layer film suitable for photon irradiation in brachytherapy applications. Dose measurements were carried out with a low dose rate 137Cs brachytherapy source, which produces very steep dose gradients in its vicinity, and therefore requires the capability of producing high spatial resolution isodose curves. Quantification of the dose rate in water per unit air kerma strength was obtained using a high-resolution transmission commercial scanner (Agfa DuoScan T1200 with the capability of digitising up to 600 x 1200 pixels per inch using 36 bits per pixel, together with optical density measurements. The Monte Carlo calculations and experimental measurements compared well in the 0-50 Gy dose interval used in this study. PMID:12382798

  5. Radiochromic dye film studies for brachytherapy applications

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Davalos, A.; Rodriguez-Villafuerte, M.; Diaz-Perches, R.; Arzamendi-Perez, S

    2002-07-01

    Commercial radiochromic dye films have been used in recent years to quantify absorbed dose in several medical applications. In this study we present the characterisation of the GafChromic MD-55-2 dye film, a double sensitive layer film suitable for photon irradiation in brachytherapy applications. Dose measurements were carried out with a low dose rate {sup 137}Cs brachytherapy source, which produces very steep dose gradients in its vicinity, and therefore requires the capability of producing high spatial resolution isodose curves. Quantification of the dose rate in water per unit air kerma strength was obtained using a high-resolution transmission commercial scanner (Agfa DuoScan T1200) with the capability of digitising up to 600 x 1200 pixels per inch using 36 bits per pixel, together with optical density measurements. The Monte Carlo calculations and experimental measurements compared well in the 0-50 Gy dose interval used in this study. (author)

  6. Radiochromic dye film studies for brachytherapy applications

    International Nuclear Information System (INIS)

    Commercial radiochromic dye films have been used in recent years to quantify absorbed dose in several medical applications. In this study we present the characterisation of the GafChromic MD-55-2 dye film, a double sensitive layer film suitable for photon irradiation in brachytherapy applications. Dose measurements were carried out with a low dose rate 137Cs brachytherapy source, which produces very steep dose gradients in its vicinity, and therefore requires the capability of producing high spatial resolution isodose curves. Quantification of the dose rate in water per unit air kerma strength was obtained using a high-resolution transmission commercial scanner (Agfa DuoScan T1200) with the capability of digitising up to 600 x 1200 pixels per inch using 36 bits per pixel, together with optical density measurements. The Monte Carlo calculations and experimental measurements compared well in the 0-50 Gy dose interval used in this study. (author)

  7. Qualitative values of radioactivity, area and volumetric: Application on phantoms (target and background)

    International Nuclear Information System (INIS)

    The visualization of a lesion depends on the contrast between the lesion and surrounding background (T/B; (target/background) ratio). For imaging in vivo not only is the radioactivity in the target organ important, but so too is the ratio of radioactivity in the target versus that in the background. Nearly all studies reported in the literature have dealt with the surface index, as a standard factor to study the relationship between the target (tissue or organ) and the background. It is necessary to know the ratio between the volumetric activity of lesions (targets) and normal tissues (background) instead of knowing the ratio between the area activity, the volume index being a more realistic factor than the area index as the targets (tissues or organs) are real volumes that have surfaces. The intention is that this work should aid in approaching a quantitative relationship and differentiation between different tissues (target/background or abnormal/normal tissues). For the background, square regions of interest (Rios) (11x11 pixels in size) were manually drawn by the observer at locations far from the border of the plastic cylinder (simulated organ), while an isocontour region with 50% threshold was drawn automatically over the cylinder. The total number of counts and pixels in each of these regions was calculated. The relationship between different phantom parameters, cylinder (target) depth, area activity ratio (background/target, A(B/T)) and real volumetric activity ratio (background/target, V(B/T)), was demonstrated. Variations in the area and volumetric activity ratio values with respect to the depth were deduced. To find a realistic value of the ratio, calibration charts have been constructed that relate the area and real volumetric ratios as a function of depth of the tissues and organs. Our experiments show that the cross-sectional area of the cylinder (applying a threshold 50% isocontour) has a weak dependence on the activity concentrations of the

  8. Mineral resources of the Massacre Rim Wilderness Study Area, Washoe County, Nevada

    International Nuclear Information System (INIS)

    The Massacre Rim Wilderness Study Area encompasses 23,260 acres in Northwest Nevada. There is moderate mineral resource potential for gold, silve, and mercury in hydrothermal deposits in the eastern part of the study area. There is moderate mineral resource potential for uranium throughout the study area. There is no potential for oil and gas in the study area. The potential for geothermal resources is unknown

  9. A demographic model for small area population projections: an application to the Census Metropolitan Area of Hamilton in Ontario, Canada

    OpenAIRE

    Pavlos S. Kanaroglou; Hanna F Maoh; Bruce Newbold; Scott, Darren M; Antonio Paez

    2009-01-01

    This paper reports on the development of a demographic model capable of projecting the spatial distribution of population by age and sex for small areas such as census tracts. The proposed modeling framework makes use of two components: the Rogers multiregional population projection model and the aggregate spatial multinomial logit (ASMNL) model. The Rogers model utilizes cohort vital statistics on fertility, mortality, and migration to project the progression of population by age and sex at ...

  10. Mineralogy, geochemistry, genesis, and industrial application of silica in Arefi area, south of Mashhad

    Directory of Open Access Journals (Sweden)

    Mohammad Hassan Karimpour

    2014-10-01

    Full Text Available Introduction Arefi quartz-bearing conglomerate (Middle Jurassic is situated within Binalud structural zone. The unit is trending NW-SE located 25 km south of Mashhad. More than 97% of the pebbles are quartz as mono-crystalline, poly-crystalline, and minor fragments of chert, quartzite, and mica schist. Less that 3% of the remaining minerals are feldspar, mica, chlorite, hornblende, tourmaline, zircon, sphene, and opaque minerals. The cement is mainly silica. Hashemi (Hashemi, 2004 suggested this unit is orthoquartzitic polymictic conglomerate. In this study, we carried out detailed mineralogical studies, geochemical analyses for SiO2 and troublesome elements, determination of quartz pebbles source using geological observations and fluid inclusion microthermometry, and industrial application studies with new insight for porcelain and ceramic factories as the nearest silica-rich reserve to Mashhad. Material and methods 1. Preparing geologic map in 1:10000 scale in the Arefi area. 2. Petrographic study of 65 samples from the quartz-bearing conglomerate unit. 3. Major elements such as SiO2, TFeO, TiO2, and CaO were analyzed at the Maghsoud Porcelain Factories Group, using a Philips PW1480 X-ray spectrometer. 4. Ore dressing analyses in Danesh Faravaran Engineering Company. 5. Fluid-inclusion studies in 4 samples doubly-polished wafers of quartz crystals were studied using standard techniques (Roedder, 1984 and Linkam THM 600 heating-freezing stage (from –190 to 600ºC mounted on a Olympus TH4–200 microscope stage at Ferdowsi University of Mashhad, Iran. Salinities and density of fluid inclusions were calculated using the Microsoft Excel spreadsheet HOKIEFLINCS-H2O-NACL (Steele-MacInnis et al., 2012; Lecumberri-Sanchez et al., 2012 Results and Discussion Fluid Inclusion studies of both mono- and poly- crystalline quartz revealed that the inclusions consist of three phases (LVS with NaCl crystals. Homogenization temperature is between 484 and more

  11. Progress on HTR application's study in Indonesia

    International Nuclear Information System (INIS)

    Study on the application of HTRs for the enhanced oil recovery in the Duri oil field (Sumatra, Indonesia) was performed in 1986/1987. The economic and technological advantages over crude burning option were identified. Crude oil prices, HTR capital costs, discout rates, company's income structure represented dominant parameters. Further sensitivity calculations on important economic parameters were obtained to reflect the condition of 1988. This nuclear option was also incorporated in the energy planning study for the whole Indonesia using the MARKAL model, and resulted the conditions of its applicability. The scenarios chosen in this MARKAL study were high and low GDP growth rate, whereas the criteria chosen were the minimum cost with and without a predetermined policy of reduced domestic use of oil. In the high scenario the HTRs as well as the natural gas options could not compete against the low cost boilers with crude-oil fuel. But in the case of reduced domestic oil use the HTRs came out to supplement the crude-burning boilers starting in the sixth five year plan (1994 - 1999), even earlier than the natural gas option. The authors further discuss the industrial environment, in relation with the regional development, the possible local participation, as well as the plan to materialize the merits of this novel application. (author)

  12. Experimental and computational studies on a steam jet refrigeration system with constant area and variable area ejectors

    International Nuclear Information System (INIS)

    Graphical abstract: The work aimed at studying the performance of a steam jet refrigeration system with (i) a constant area ejector and (ii) a variable area ejector under different operating conditions both experimentally and computationally. The boiler temperature was varied from 90 °C to 120 °C, the evaporator temperature was varied from 5 °C to 15 °C and the entertainment ratio, variation of Mach number along the ejector and the Coefficient of Performance were obtained. With proper design, the shock phenomenon in the variable area ejector was eliminated as shown in the left figure, which resulted in a better performance of the variable area ejector over a range of evaporator temperatures. The study also confirmed that the system can operate steadily at a boiler temperature of 90 °C which can be obtained from waste heat. - Highlights: • Experimental and computational studies on steam jet refrigeration system carried out. • Constant area and variable area ejectors were designed for low heat input. • Evaporator temperature was varied from 5 °C to 15 °C and the boiler temperature from 90 °C to 120 °C. • At the lower boiler temperature, no shock formed in the variable area ejector resulting in better performance. • A steam jet refrigeration system can operate steadily at boiler temperature of 90 °C. - Abstract: This paper first presents the results from an experimental study of a conventional steam jet ejector refrigeration system and compares the performance with the computational fluid dynamics (CFD) results of the same. Secondly, it describes a method of developing a variable area supersonic ejector and presents experimental results of the operating performance of the variable area ejector over the same operating conditions. The two ejectors were experimentally tested for boiler temperatures below 120 °C and an evaporator temperature below 15 °C. It was found that the steam jet refrigeration system can operate with stability at low boiler

  13. A STUDY OF LANGUAGE TEACHERS' QUALITIES IN RURAL AREAS

    Institute of Scientific and Technical Information of China (English)

    ZhangGuohua

    2004-01-01

    Language teachers are the main language input sources forthe students in rural areas. Whether they are well-qualified ornot matters a lot for English teaching. Besides discussing Englishteachers' qualities, the writer of this article generallyinvestigates English teachers' professional qualities in a ruralcounty through a questionnaire in which 20 questions on experts'advice were designed for the teachers. Altogether 65 Englishteachers, comprising 64% of the whole, distributed in varioustypes of schools took part. The final figures revealed problemssuch as narrow adoption of modern teaching media, thedominating grammar-translation method, the lack of necessay knowledge of English culture and linguistic theory, etc.

  14. Applicability of gassy mine regulations: Engineering study report

    International Nuclear Information System (INIS)

    This study reviewed three bodies of current Mine Safety and Health Administration (MSHA) gassy mine regulations, to address whether the Code of Federal Regulations (CFR) Title 30, Part 57 Safety and Health Standards - Metal and Nonmetal Underground Mines, Section 21-Gassy Mines, or Parts 75 Mandatory Safety Standards - Underground Coal Mines, and Part 77 Mandatory Safety Standards - Surface Coal Mines and Surface Work Areas of Underground Coal Mines, are more applicable to a subsurface repository design. Part 57.21 is determined to be most applicable. There are, however, three sections in Parts 75 and 77 which address certain applicable items in greater detail and, therefore, will provide a more conservative design approach in these areas than Part 57.21, and should be incorporated into the basis for design. Study work also revealed that proposed CFR Title 30, Part 58 Mine Safety and Health - Metal and Nonmetal Standards, will have to be considered during design work if and when these have been promulgated. 9 refs., 1 fig., 1 tab

  15. Application of ammoniumcyanoferrate in remedial measures in an area of elevated Cs-contamination in milk

    International Nuclear Information System (INIS)

    Due to their relative long half-life and the high transfer factor into foodstuff Cs-isotopes may cause a substantial contribution to the exposure of the population after a fallout from a reactor accident or nuclear weapons' detonations. The reduction of Cs-concentration in foodstuff, therefore, is one of the major goals in proper countermeasures after such a contamination. Ammonium-Ferric-Hexacyano-Ferrate (AFCF), commonly referred to as 'Giese-salt', is known to result in a substantial reduction of the Cs-activity concentration in milk and meat when applied with the fodder to the animal. The theoretically achievable reduction in activity concentration under experimental conditions and under scientific surveillance is known and amounts to about 80-90 %. Such experiments have been performed up to now on only a few individual animals. The actual reduction, however, which is achievable under realistic conditions is not well known. This reduction depends on such factors as acceptance of application by farmers, knowledge and ability to apply it in the prescribed way, but also on the variability between different animals, etc. To investigate this question under realistic terms incorporating a large number of animals was enabled by the fact that ammoniumcyanoferrate was applied in an area of elevated 137Cs-activity concentrations in milk in a part of the province of Lower Austria in the first half of 1988. In contrast to the ideal situation of a research farm under controlled and optimized circumstances, the application was performed by several hundred farmers not acquainted to the application before. These had been only trained by members of the local agricultural associations and colleges before application and applied the salt according to their ability and understanding. (author)

  16. A study of sinkhole hazard at area of locked colliery

    International Nuclear Information System (INIS)

    Transformations of polish industry began the process of mine closures. Among various mines being in process of abandoning, there are a large number of collieries, which exploited coal since 17. century. The depth of mining openings ranged from some to hundreds meters. The height of primary mining openings ranged from 1 to 9 m. Mining operations have left in geological basement large number of cavities, which still create a hazard to the surface stability. Post mining deformations of the surface can take continuous and discontinuous forms. The last ones are the topic of paper. Although those deformations can take various forms, they are commonly called as sinkholes. In paper, the sinkholes hazard has been analyzed in a scale of selected one mine area, in regard to various parameters. The selected 'Siemianowice' mine is located in northern part of the Upper Silesian Coal Basin. A database containing full set of sinkholes, recorded within area of mine in a period of 50 years, has been tested in geomechanical and statistical approaches. (author)

  17. Regional carrying capacity: case studies of Bohai Rim area

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Carrying capacity research has been carried out for a long time. However, synthesized carrying capacity researches based on systematic views began only in the 1970s. There is even less work done in China. This paper tries to address both synthesized carrying capacity research and its utilization in China. State spaces method from the systematic science was borrowed to construct the conceptual model of regional carrying capacity. Based on the conceptual model and the surveys in the Bohai Rim area, we construct a representative indicators system for quantifying regional carrying capacity in the Bohai Rim. While employing system dynamic models we simulated the evolving trend of both the regional carrying states and regional carrying capacity from 1999 to 2015. The results proved the statement that Bohai Rim is overall over-capacity for a long time and will be over-capacity in the foreseeable future. Among all the restriction factors, water shortage and environmental pollution stand out to be the two primary obstacles for Bohai Rim's sustainable development.Regional differentiation analysis further indicates that coastal areas of the Bohai Rim burden more than its overall level. However, Shandong province shows some good signs in addressing the regional carrying capacity issues. The research is successful in addressing the quantification of regional carrying capacity issues, but nonetheless it needs further refinery and more information.

  18. Technological Monitoring Study Based on Invention Patents of Omeprazoleand Derivatives with Pharmaceutical Applications

    Directory of Open Access Journals (Sweden)

    Leandra Guimarães de Oliveira

    2010-11-01

    Full Text Available The current study intends to present the relevance of omeprazole, esomeprazole, rabeprazole, pantoprazole and lansoprazole by means of the technological foresight study, through invention patent documents from Brazilian applicants as indicators of innovation. The European database of patents (Espacenet, Word Patent Index (DERWENT and the Brazilian Patent Base of INPI were used, combining keywords and International Patent Classifications. The major applicants, countries of publication and claims categories were mapped. The 212 patent requests collected are mainly distributed in Chemistry, Pharmacy and Pharmacology areas. The results obtained revealed that the US was the main country with studies directed to this technological area (59 patent applications and the major applicant was the company Astrazeneca AB. Therefore, we can understand that this is a promising technology that may reflect in an increase of R&D activities and patent applications in this area.

  19. Debris Flow Vulnerability Assessment in Urban Area Associated with Landslide Hazard Map : Application to Busan, Korea

    Science.gov (United States)

    Okjeong, Lee; Yoonkyung, Park; Mookwang, Sung; Sangdan, Kim

    2016-04-01

    In this presentation, an urban debris flow disaster vulnerability assessment methodology is suggested with major focus on urban social and economic aspect. The proposed methodology is developed based on the landslide hazard maps that Korean Forest Service has utilized to identify landslide source areas. Frist, debris flows are propagated to urban areas from such source areas by Flow-R model, and then urban vulnerability is evaluated by two categories; physical and socio-economic aspect. The physical vulnerability is associated to buildings that can be broken down by a landslide event directly. This study considers two popular building structure types, reinforced concrete frame and non-reinforced concretes frame, to evaluate the physically-based vulnerability. The socio-economic vulnerability is measured as a function of the resistant levels of the exposed people, the intensity and magnitude of indirect or intangible losses, and preparedness level of the local government. An indicator-based model is established to evaluate the life and indirect loss under urban debris flow disasters as well as the resilience ability against disasters. To illuminate the validity of the suggested methodology, physical and socio-economic vulnerability levels are investigated for Daejeon, Korea using the proposed approach. The results reveal that the higher population density areas under a weaker fiscal condition that are located at the downstream of mountainous areas are more vulnerable than the areas in opposite conditions. Key words: Debris flow disasters, Physical vulnerability, Socio-economic Vulnerability, Urban Acknowledgement This research was supported by a grant(13SCIPS04) from Smart Civil Infrastructure Research Program funded by Ministry of Land, Infrastructure and Transport(MOLIT) of Korea government and Korea Agency for Infrastructure Technology Advancement(KAIA).

  20. Study on Planning Standards for Urban Renewal Areas in Shenzhen

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The paper starts from the origin and evolution of city planning standards of Shenzhen before analyzing the new demands for the standards by the development of city renewal amid city transition,and establishes a primary framework for the planning standards and requirements.In addition,on the basis of comparing with the formulation of planning standards of Hong Kong,Shanghai,and Changsha,the paper carries out a discussion on the formulation ideas and main contents of the planning standards for the urban renewal areas in Shenzhen.Moreover,the paper also analyzes the standards for renewal objects,scope,mode,functions guidance,development control,and public facilities,all of which are quite heated issues and key elements in the process of formulation and approval of renewal planning,in order to improve the institutional structure of the City Planning Standards and Requirements of Shenzhen and meet the government’s demand in realizing a refined management.

  1. A MAC Protocol for Medical Monitoring Applications of Wireless Body Area Networks

    Science.gov (United States)

    Shu, Minglei; Yuan, Dongfeng; Zhang, Chongqing; Wang, Yinglong; Chen, Changfang

    2015-01-01

    Targeting the medical monitoring applications of wireless body area networks (WBANs), a hybrid medium access control protocol using an interrupt mechanism (I-MAC) is proposed to improve the energy and time slot utilization efficiency and to meet the data delivery delay requirement at the same time. Unlike existing hybrid MAC protocols, a superframe structure with a longer length is adopted to avoid unnecessary beacons. The time slots are mostly allocated to nodes with periodic data sources. Short interruption slots are inserted into the superframe to convey the urgent data and to guarantee the real-time requirements of these data. During these interruption slots, the coordinator can break the running superframe and start a new superframe. A contention access period (CAP) is only activated when there are more data that need to be delivered. Experimental results show the effectiveness of the proposed MAC protocol in WBANs with low urgent traffic. PMID:26046596

  2. Geochemical and Economic Application of Marble from Igarra and Ikpeshi Areas, S.W. Nigeria

    OpenAIRE

    Obasi, R. A; Anike, O. L

    2012-01-01

    Marble deposits occur prominently in Igarra and Ikpeshi areas of Southwestern Nigeria. Forty marble samples were subjected to geochemical and physical analysis in order to determine their applications. Geochemical data show that the Igarra marble is characterized by low SiO2 (1.84 – 4.83%), Al2O3 (0.16 – 0.67%) and MgO (1.10 – 5.33%) and high CaO (46.51 – 53.06%) and LOI (40.59 – 44.26%). This results in markedly low dolomite, MgCO3 (2.30 – 11.14%) and high calcite, CaCO3 (85.45 – 94.68%). Th...

  3. Wireless Technology and System Integration in Body Area Networks for m-Health Applications.

    Science.gov (United States)

    Jovanov, Emil

    2005-01-01

    m-Health integrates mobile computing, medical sensor, and communications technologies for mobile health-care applications. Wireless body area networks (WBANs) of intelligent sensors represent an emerging technology for system integration with great potentials for unobtrusive ambulatory health monitoring during extended periods of time. However, system designers will have to resolve a number of issues, such as severe limitations of sensor weight and size necessary to improve user's compliance, sensor resource constraints, intermittent availability of uplink connectivity, reliability of transmission, security, and interoperability of different platforms. We present current and emerging wireless technologies and developments in pervasive and mobile technologies that are vital for implementation of WBAN-based monitors and m-Health system integration. We emphasize the problem of reliable system operation with extremely low power consumption and discontinuous connectivity, which are typical for ambulatory monitoring. PMID:17281927

  4. Testing and evaluation of large-area heliostats for solar thermal applications

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, J.W.; Houser, R.M.

    1993-02-01

    Two heliostats representing the state-of-the-art in glass-metal designs for central receiver (and photovoltaic tracking) applications were tested and evaluated at the National Solar Thermal Test Facility in Albuquerque, New Mexico from 1986 to 1992. These heliostats have collection areas of 148 and 200 m{sup 2} and represent low-cost designs for heliostats that employ glass-metal mirrors. The evaluation encompassed the performance and operational characteristics of the heliostats, and examined heliostat beam quality, the effect of elevated winds on beam quality, heliostat drives and controls, mirror module reflectance and durability, and the overall operational and maintenance characteristics of the two heliostats. A comprehensive presentation of the results of these and other tests is presented. The results are prefaced by a review of the development (in the United States) of heliostat technology.

  5. Emergency planning for hazardous industrial areas: a Brazilian case study.

    Science.gov (United States)

    de Souza, A B

    2000-08-01

    One of the characteristics of modern industrial development is the emergence of a new typology of accidents whose effects can be spread, in space as well as in time, well beyond the borders of the installations where they occur, sometimes impacting the local population and the environment in a catastrophic fashion. This is the result of a number of factors that have changed the risk profile of modern industrial activities. For a number of reasons, the developing countries have proved to be more vulnerable to industrial disasters. Three of the most catastrophic industrial accidents--Bhopal, San Juan de Ixhuatepec, and Cubatão--occurred in developing countries, claiming thousands of lives. During the 1970s and 1980s the higher degree of public visibility of industrial hazards as a result of serious accidents, led to the creation, especially in the more industrialized countries, of regulations for greater control over industrial activities, either by means of new laws or by updating existing legislation. Some of these regulations were designed to improve the response to accidents with potential impacts outside the industrial sites. This article attempts to describe the current status and identify the shortcomings of off-site emergency planning for hazardous industrial areas in Brazil. The most important problems are the lack of specific legislation and the absence of awareness and active participation of public authorities. The experience of an off-site emergency planning process for a Brazilian industrial area is presented. This experience illustrates how difficult it is to prepare and implement emergency planning processes in an industrializing country. PMID:11051072

  6. SOME KEY ISSUES ON THE APPLICATION OF SATELLITE REMOTE SENSING TO MINING AREAS

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In order to apply Satellite Remote Sensing (RS) to mining areas, some key issues should be solved. Based on an introduction to relative studying background, related key issues are proposed and analyzed oriented to the development of RS information science and demands of mining areas. Band selection and combination optimization of Landsat TM is discussed firstly, and it proved that the combination of Band 3, Band 4 and Band 5 has the largest information amount in all three-band combination schemes by both N-dimensional entropy method and Genetic Algorithm (GA). After that the filtering of Radarsat image is discussed. Different filtering methods are experimented and compared, and adaptive methods are more efficient than others. Finally the classification of satellite RS image is studied, and some new methods including classification by improved BPNN(Back Propagation Neural Network) and classification based on GIS and knowledge are proposed.

  7. Application of passive seismic to shallow geological structures in urban areas

    Directory of Open Access Journals (Sweden)

    Mendecki Maciej Jan

    2014-12-01

    Full Text Available To study the shallow geological structure the Refraction Microtremor (ReMi method was applied. This technique uses seismic noise analysis where a source of this small vibrations is the human activity e.g.: traffic, production, factories. The surveys were carried out in selected urban areas in the region of the Upper Silesian Industrial District : Sosnowiec - Pogoń , Chorzów - Chorzow Stary and Bytom - Karb. Each area is characterized by the presence of nearby roads with a very high traffic. The results of passive seismic (ReMi were confronted with data obtained using Multichannel Analysis of Surface Waves (MASW and resistivity imaging (RI. Seismic surveys were performed by apparatus PASI with 24 channels using geophones of 4.5Hz. The results showed that passive seismic can be satisfactorily used in such urban conditions. The shallow geological structure interpreted by seismic methods have been well-correlated with resistivity studies.

  8. Multianode photomultiplier tube studies for imaging applications

    International Nuclear Information System (INIS)

    Highly efficient and position sensitive photon detection is essential in a variety of applications from particle identification in fundamental nuclear and particle physics research, to radionuclide imaging in healthcare. Due to their position sensitivity and high packing fraction, the Hamamatsu H8500 and H9500 multianode photomultiplier tubes (MAPMTs) are promising candidates for such applications and have thus been studied through precision laser scans at several light intensities. This has revealed signal and crosstalk dependencies upon constructional features of the MAPMTs. Both MAPMTs feature a common last dynode output signal, which can be used for self-triggering. The strength and timing of this signal have been investigated for the H8500 MAPMT, yielding similar dependencies upon MAPMT construction and standard deviation time resolutions of 67.5 ps and 154.4 ps for 20 and single photoelectron signals respectively.

  9. Radiological impact of radionuclide uptake by plants in the land application area

    International Nuclear Information System (INIS)

    Radionuclide concentrations in fruits and foliage of plants can increase as the result of irrigation with effluent water from a uranium mine. The significance of this pathway is discussed with respect to radiological impact from consumption of food and from the generation of ash as a result of bush fires. During the irrigation phase, radionuclide uptake by plants is expected to be via roots only. It is important to make a distinction between the contribution of these two systems, because radiological impact on humans via the vegetation pathways is likely to take place after rehabilitation, when the area could be occupied by humans. This distinction has been achieved through comparison of radionuclide concentrations in the vegetation harvested from an experimental plot, before, during and after irrigation with the simulated Retention Pond 2 (RP2) water of the Ranger Uranium Mine. The consumption of terrestrial food by the Aboriginal people is small and annual land application is likely to result in a dose increment of 3 μSv y-1 during future occupancy of the land application area. Bush fires immediately after irrigation may generate ash material 30-40 times more radioactive than the soil material, but subsequent bush fires will produce less radioactive ash. With the exception of uranium in foliage, the measured concentration factors agree within a factor of two with the default values recommended by IAEA. The uranium concentration factor for foliage material was found to be 2-8 times higher than the IAEA default value. 14 refs., 5 tabs., 3 figs

  10. Geochemical and Economic Application of Marble from Igarra and Ikpeshi Areas, S.W. Nigeria

    Directory of Open Access Journals (Sweden)

    Obasi, R A

    2012-10-01

    Full Text Available Marble deposits occur prominently in Igarra and Ikpeshi areas of Southwestern Nigeria. Forty marble samples were subjected to geochemical and physical analysis in order to determine their applications. Geochemical data show that the Igarra marble is characterized by low SiO2 (1.84 – 4.83%, Al2O3 (0.16 – 0.67% and MgO (1.10 – 5.33% and high CaO (46.51 – 53.06% and LOI (40.59 – 44.26%. This results in markedly low dolomite, MgCO3 (2.30 – 11.14% and high calcite, CaCO3 (85.45 – 94.68%. The Ikpeshi marble is majorly calcitic having contained high values of CaCO3 (61.003 – 95.61% and low values of MgCO3 (1.35 – 7.44%. However, the marble at the Golden Girl quarry is dolomitic having a MgCO3 content of 41.38 – 41.42%. The marble is suitable as sources of industrial raw materials for a variety of consumer products such as drugs, toothpaste, animal feeds and paper production. Other areas of application include agriculture, monuments, electrical, interior decoratives, flooring tiles, terrazzo chips, and fittings. However, the marble cannot be used for cement production due to low values of CaO (53.06% and high values of LOI (>43% unless the CaO and the SiO2 are blended.

  11. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this st...

  12. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; A. S. Kayaalp

    2009-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many...

  13. Development of a smart flood warning system in urban areas: A case study of Huwei area in Taiwan

    Science.gov (United States)

    Yang, Sheng-Chi; Hsu, Hao-Ming; Kao, Hong-Ming

    2016-04-01

    In this study, we developed a smart flood warning system to clearly understand flood propagations in urban areas. The science and technology park of Huwei, located in the southwest of Taiwan, was selected as a study area. It was designated to be an important urban area of optoelectronics and biotechnology. The region has an area about 1 km2 with approximately 1 km in both length and width. The discrepancy between the highest and lowest elevations is 6.3 m and its elevation decreases along the northeast to the southwest. It is an isolated urban drainage area due to its urban construction plan. The storm sewer system in this region includes three major networks that collect the runoff and drain to the detention pond where is located in the southwest corner of the region. The proposed smart flood warning system combines three important parts, i.e. the physical world, the cyber-physical interface, and the cyber space, to identify how the flood affects urban areas from now until the next three hours. In the physical world, when a rainfall event occurs, monitoring sensors (e.g. rainfall gauges and water level gauges built in the sewer system and ground surface), which are established in several essential locations of the study area, collect in situ hydrological data and then these data being transported to the cyber-physical interface. The cyber-physical interface is a data preprocess space that includes data analysis, quality control and assurance, and data integration and standardization to produce the validated data. In the cyber space, it has missions to receive the validated data from the cyber-physical interface and to run the time machine that has flood analyses of data mining, inundation scenarios simulation, risk and economic assessments, and so on, based on the validated data. After running the time machine, it offers the analyzed results related to flooding planning, mitigation, response, and recovery. According to the analyzed results, the decision supporting

  14. Improved techniques in data analysis and interpretation of potential fields: examples of application in volcanic and seismically active areas

    Directory of Open Access Journals (Sweden)

    G. Florio

    2002-06-01

    Full Text Available Geopotential data may be interpreted by many different techniques, depending on the nature of the mathematical equations correlating specific unknown ground parameters to the measured data set. The investigation based on the study of the gravity and magnetic anomaly fields represents one of the most important geophysical approaches in the earth sciences. It has now evolved aimed both at improving of known methods and testing other new and reliable techniques. This paper outlines a general framework for several applications of recent techniques in the study of the potential methods for the earth sciences. Most of them are here described and significant case histories are shown to illustrate their reliability on active seismic and volcanic areas.

  15. Vital area identification for U.S. Nuclear Regulatory Commission nuclear power reactor licensees and new reactor applicants.

    Energy Technology Data Exchange (ETDEWEB)

    Whitehead, Donnie Wayne; Varnado, G. Bruce

    2008-09-01

    U.S. Nuclear Regulatory Commission nuclear power plant licensees and new reactor applicants are required to provide protection of their plants against radiological sabotage, including the placement of vital equipment in vital areas. This document describes a systematic process for the identification of the minimum set of areas that must be designated as vital areas in order to ensure that all radiological sabotage scenarios are prevented. Vital area identification involves the use of logic models to systematically identify all of the malicious acts or combinations of malicious acts that could lead to radiological sabotage. The models available in the plant probabilistic risk assessment and other safety analyses provide a great deal of the information and basic model structure needed for the sabotage logic model. Once the sabotage logic model is developed, the events (or malicious acts) in the model are replaced with the areas in which the events can be accomplished. This sabotage area logic model is then analyzed to identify the target sets (combinations of areas the adversary must visit to cause radiological sabotage) and the candidate vital area sets (combinations of areas that must be protected against adversary access to prevent radiological sabotage). Any one of the candidate vital area sets can be selected for protection. Appropriate selection criteria will allow the licensee or new reactor applicant to minimize the impacts of vital area protection measures on plant safety, cost, operations, or other factors of concern.

  16. 3D measurement in nuclear areas: a review of recent developments and applications

    International Nuclear Information System (INIS)

    Full text of publication follows: The need of accurate measurement and 3D modeling of industrial installations is increasing, mainly due to safety requirements and dismantling projects. Digital photogrammetry is now a wide-spread measurement technique for industrial applications. From images and existing software, users can carry on both 3D measurements of equipments with high accuracy and 3D CAD modelling of industrial installations. While 3D accurate measurements are usually dedicated to manufacturing control, inspection or deformation measurement of existing equipment, 3D CAD modelling is more dedicated to the simulation of modification or dismantling of such installations as nuclear cells or petrochemical plants (revamping). Concerning nuclear areas, photogrammetry can also be carried out with a gamma camera, allowing to create a so called 'gamma-3d' model which indicates accurately the position of hot spots (COGEMA patent). Nevertheless, these techniques are still time-consuming and the operator task requires much attention. Lack of automation in the image processing tools leads the user to perform manual selections in the images as soon as the complexity of the equipment increases. In the first part of this document we will describe new developments allowing to reduce the processing time and to make the system semi-automatic by integrating image processing techniques in a photogrammetric system. Then we will present some industrial applications carried out recently and integrating part of such developments. (authors)

  17. Strategic areas for non-electric application of nuclear energy in Indonesia

    International Nuclear Information System (INIS)

    An attempt is made to identify strategic areas, whereby non-electric application of nuclear energy may be justified. Subject to further evaluation, particularly on the economic aspects, non-electric application of nuclear energy in Indonesia may have justifiable strategic role in the long term sustainability of the development of the country. The key arguments are: (a) within not too far distant future, domestic resources constraints of oil and natural gas will strongly be felt, especially if the current trend in the rate of production of the two commodities has to be maintained to satisfy the growing demand for energy and to secure foreign exchange earning; (b) nuclear option, in concurrent with coal and biomass options, can provide the need for heat supply required to undertake strategic schemes for (i) improving oil production capacity; (ii) prolong the availability of oil and natural gas by displacing their uses as heat sources in industry, whenever appropriate; (iii) coal conversion to synthetic natural gas (SNG), or synthesis gas, to substitute or at least supplement the use of natural gas as industrial chemical feedstock; and (iv) sea water desalination by evaporation, to overcome shortage of fresh drinking and industrial water supply, as well as to secure its reliability and availability. In terms of carbon emission to the atmosphere, the nuclear option offers an interesting choice. In view of those, serious consideration for further technical assessment, and thorough evaluation on the economic viability and social acceptability for the option is recommended. (author). 7 refs, 5 figs, 2 tabs

  18. 2D resistivity survey in complex geological structure area. Application to the volcanic area; Fukuzatsuna chishitsu kozo chiiki ni okeru hiteiko nijigen tansa. Kazangan chiiki deno tekiorei

    Energy Technology Data Exchange (ETDEWEB)

    Asakawa, S.; Ikuma, T.; Tanifuji, R. [DIA Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    Introduced herein is an application of 2D resistivity survey to a volcanic rock area where the survey result is difficult to interpret because of its complex geological structure. In a dam site survey, main problems involve the permeability of water through faults and weathered, altered zones. At this site, a 2D resistivity survey was conducted, a 2D geological structure was deduced from the resistivity section, and the result was examined. It was found that resistivity distribution was closely related to hydrographic factors, but no obvious correlation was detected between rock classes and R, Q, and D. In conducting investigations into a section planned for a highway tunnel, it was learned that the problem was a volcanic ash layer to collapse instantly upon absorbing water, and the distribution of the ash layer, not to be disclosed by boring, was subjected to a 2D resistivity survey. The survey was conducted into the structure above where the tunnel would run, and further into the face, and studies were made about what layer was reflected by the resistivity distribution obtained by analysis. The result of the analysis agreed with the details of the layer that was disclosed afterward. 4 figs., 1 tab.

  19. Baseline non-traditional resource use in the Aurora Mine EIA local study area and the Syncrude/Suncor regional study area

    International Nuclear Information System (INIS)

    As part of the environmental impact assessment (EIA) in the regional and local study area of Syncrude's proposed Aurora Mine, the use of natural resources by non-aboriginal residents and non-residents in the area was documented. The objective of the study was to determine what specific resources are being used, how much, when, where and why. The topics included hunting, fishing, camping and canoeing. Public opinion regarding opportunities for resource use was also documented. The report focused on the dynamic nature of resource use, secondary economies (tourist accommodations) and quality of life. A telephone survey was conducted in which 17 respondents from recreational organizations answered a resource use questionnaire which contained 38 questions on consumptive and non-consumptive uses of wildlife, fish, berries, timber, non-resident use and resource management policies. The three environmentally significant areas of the local study area included the Muskeg River, Kearl Lake and East Jackpine Creek. The regional study are contained the Horse River Diversity area, La Saline Natural area, Schultz's Bog Diversity area, Athabasca Tar Sands Reach, Clearwater River, McClelland Lake Patterned Fens, McClelland Lake, and the Fort Hills. Agriculture in both areas is limited because of unfavourable climate and generally low-quality soil. 13 refs., 7 tabs., 6 figs

  20. A STUDY OF INTELLIGENT CONTROLLERS APPLICATION IN DISTRIBUTED SYSTEMS

    Directory of Open Access Journals (Sweden)

    RAVI KUMAR GULLAPALLI

    2011-09-01

    Full Text Available Intelligent Control emulates the human intelligence and achieves automation in various areas of Engineering. Intelligent Controls have been used mainly in the areas of Electrical Systems; Machine Intelligence based systems like Robotics. Intelligent Control has been active in various industrial and engineering applications.There is active research in applying Intelligent Controls in distributed computing systems like web based environments. The advent of internet has changed the business models for the service providers and consumers. The Distributed Computing Systems which host various IT and business services are expected to be available with high performance and scalability to meet the desired SLAs. There is absolute necessity in predicting the future trends of the IT environments, recognize the load patterns such that the provisioning of the hardware, software resources is appropriately handled. There are research attempts to explore the applicability of intelligent control in such different areas of computing like infrastructure provisioning and Distributed Systems. In this paper we study the various Intelligent Controls and discuss the recent trends of applying intelligent controls in Distributed Systems such as Web Servers.

  1. Study of the fumigation effect on pollutants over Inshas area

    International Nuclear Information System (INIS)

    This work aims to investigate the effect of morning fumigation event on the ground level pollutants concentration at inshas area. Monitoring stations for mesuring the hourly continues concetration of some pollutants such sulphur dioxide, carbon monoxide, and ozone were placed near the hot lab in nuclear research center for one complete year, At the same time the hourly averages meteorological parameters were measured continuously at different levels. A fortran computer program was developed to determine the relative relative concentration Assuming accident case in two cases, nonfumigation and morning fumigation. The processing and interpretation of the meteorological data and pollutants concentration revealed that these high pollution events occur almost on daily bassis, usually several hours between sunrise and before afternoon. The maximum fumigation peaks occur earlier in the summer than other seasons owing to theearlier sunrise in addition, ozone concentrations appear to reach their maximum a few hours after intense fumigation events. Maximum hourly concentrations of sulphur dioxide, carbon monoxide and ozone don't exceed threshold values that are considered to be phytotoxic. As sunset pollutant concentration is decrease due to lofting condition

  2. Study on vital area identification for physical protection system

    International Nuclear Information System (INIS)

    Physical protection (PP), which is required for the security of nuclear facilities and has recently caught the attention of the international community, is a mandatory design requirement for innovative nuclear energy systems. The International Atomic Energy Agency (IAEA) to this end has recommended its member countries to implement stronger physical protection measures when it amended the previous publication and released INFCIRC/225/Rev.5 in 2011; the core of the recommendation was the identification of vital areas (VAs). As the Korea Atomic Energy Research Institute (KAERI) has been developing an SFR fuel cycle with pyro processing as part of its nuclear energy R and D since the late 1990s, the concept of VAs should be incorporated at the process development and design stage in order to minimize later changes in facility design and prevent subsequent economic loss. This paper discusses the definition and process to identify VAs for the purpose of establishing physical protection systems (PPSs) for the relevant facilities in the future

  3. Soils Activity Mobility Study: Methodology and Application

    Energy Technology Data Exchange (ETDEWEB)

    Silvas, Alissa; Yucel, Vefa

    2014-09-29

    and labor- and data-intensive methods. For the watersheds analyzed in this report using the Level 1 PSIAC method, the risk of erosion is low. The field reconnaissance surveys of these watersheds confirm the conclusion that the sediment yield of undisturbed areas at the NNSS would be low. The climate, geology, soils, ground cover, land use, and runoff potential are similar among these watersheds. There are no well-defined ephemeral channels except at the Smoky and Plutonium Valley sites. Topography seems to have the strongest influence on sediment yields, as sediment yields are higher on the steeper hill slopes. Lack of measured sediment yield data at the NNSS does not allow for a direct evaluation of the yield estimates by the PSIAC method. Level 2 MUSLE estimates in all the analyzed watersheds except Shasta are a small percentage of the estimates from PSIAC because MUSLE is not inclusive of channel erosion. This indicates that channel erosion dominates the total sediment yield in these watersheds. Annual sediment yields for these watersheds are estimated using the CHAN-SEDI and CHAN-SEDII channel sediment transport models. Both transport models give similar results and exceed the estimates obtained from PSIAC and MUSLE. It is recommended that the total watershed sediment yield of watersheds at the NNSS with flow channels be obtained by adding the washload estimate (rill and inter-rill erosion) from MUSLE to that obtained from channel transport models (bed load and suspended sediment). PSIAC will give comparable results if factor scores for channel erosion are revised towards the high erosion level. Application of the Level 3 process-based models to estimate sediment yields at the NNSS cannot be recommended at this time. Increased model complexity alone will not improve the certainty of the sediment yield estimates. Models must be calibrated against measured data before model results are accepted as certain. Because no measurements of sediment yields at the NNSS are

  4. Dipmeter: interpretation and applications in Pilar field southeast area, Brazil; Interpretacao e aplicacao do perfil de mergulho na area sudeste do Campo de Pilar, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Maria T.M.; Goes, Raul O. de; Sa, Jesse G. de [PETROBRAS, Maceio, AL (Brazil). Distrito de Exploracao do Nordeste

    1987-08-01

    Study of dipmeter technology in petroleum prospect, its application and utilization, methodology of the essay, theoretical basis, processing interpretation methods and stratigraphic analysis are presented. Application of the method and its results interpretation on the Pilar field, in the Coqueiro Seco formation are also showing. 22 figs., 8 refs

  5. COASTAL STUDY, COLLIER COUNTY, FLORIDA AND INCORPORATED AREAS

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Coastal study data as defined in FEMA Guidelines and Specifications, Appendix D: Guidance for Coastal Flooding Analyses and Mapping, submitted as a result of a...

  6. Hanford 100-N Area Tracer Study Final Report

    International Nuclear Information System (INIS)

    This document provides an engineering tracer study final report for the determination of contact time for the disinfection process at Group A Nontransient Noncommunity water treatment plant for the 100- N Water Plant (located on the Hanford Site in Richland, Washington). The purpose of this study is to determine the actual detention time within the plant clearwell, and the disinfection contact time at several clearwell effluent flow rates

  7. Future Multiwavelength Studies with the Fermi Large Area Telescope

    Science.gov (United States)

    Thompson, David J.

    2011-01-01

    With two and a half years of experience, Fermi LAT contributions to multiwavelength studies have become an integral part of many astrophysical research projects. Future efforts will benefit from (1) Deeper LAT exposures} resulting in more sources; (2) More high-energy, high-angular resolution photons, giving better source locations and imaging; (3) Faster analysis of variability and announcements to the community; and (4) Longer time series for studies of variable source properties in comparison to other wavelengths.

  8. Process parameter impact on properties of sputtered large-area Mo bilayers for CIGS thin film solar cell applications

    International Nuclear Information System (INIS)

    Copper indium gallium selenide (CIGS) has emerged as a promising candidate for thin film solar cells, with efficiencies approaching those of silicon-based solar cells. To achieve optimum performance in CIGS solar cells, uniform, conductive, stress-free, well-adherent, reflective, crystalline molybdenum (Mo) thin films with preferred orientation (110) are desirable as a back contact on large area glass substrates. The present study focuses on cylindrical rotating DC magnetron sputtered bilayer Mo thin films on 300 mm × 300 mm soda lime glass (SLG) substrates. Key sputtering variables, namely power and Ar gas flow rates, were optimized to achieve best structural, electrical and optical properties. The Mo films were comprehensively characterized and found to possess high degree of thickness uniformity over large area. Best crystallinity, reflectance and sheet resistance was obtained at high sputtering powers and low argon gas flow rates, while mechanical properties like adhesion and residual stress were found to be best at low sputtering power and high argon gas flow rate, thereby indicating a need to arrive at a suitable trade-off during processing. - Highlights: • Sputtering of bilayer molybdenum thin films on soda lime glass • Large area deposition using rotating cylindrical direct current magnetron • Trade of sputter process parameters power and pressure • High uniformity of thickness and best electrical properties obtained • Suitable mechanical and optical properties of molybdenum are achieved for CIGS application

  9. High-resolution wave and hydrodynamics modelling in coastal areas: operational applications for coastal planning, decision support and assessment

    Science.gov (United States)

    Samaras, Achilleas G.; Gaeta, Maria Gabriella; Moreno Miquel, Adrià; Archetti, Renata

    2016-07-01

    Numerical modelling has become an essential component of today's coastal planning, decision support and risk assessment. High-resolution modelling offers an extensive range of capabilities regarding simulated conditions, works and practices and provides with a wide array of data regarding nearshore wave dynamics and hydrodynamics. In the present work, the open-source TELEMAC suite and the commercial software MIKE21 are applied to selected coastal areas of South Italy. Applications follow a scenario-based approach in order to study representative wave conditions in the coastal field; the models' results are intercompared in order to test both their performance and capabilities and are further evaluated on the basis of their operational use for coastal planning and design. A multiparametric approach for the rapid assessment of wave conditions in coastal areas is also presented and implemented in areas of the same region. The overall approach is deemed to provide useful insights on the tested models and the use of numerical models - in general - in the above context, especially considering that the design of harbours, coastal protection works and management practices in the coastal zone is based on scenario-based approaches as well.

  10. Process parameter impact on properties of sputtered large-area Mo bilayers for CIGS thin film solar cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Badgujar, Amol C.; Dhage, Sanjay R., E-mail: dhage@arci.res.in; Joshi, Shrikant V.

    2015-08-31

    Copper indium gallium selenide (CIGS) has emerged as a promising candidate for thin film solar cells, with efficiencies approaching those of silicon-based solar cells. To achieve optimum performance in CIGS solar cells, uniform, conductive, stress-free, well-adherent, reflective, crystalline molybdenum (Mo) thin films with preferred orientation (110) are desirable as a back contact on large area glass substrates. The present study focuses on cylindrical rotating DC magnetron sputtered bilayer Mo thin films on 300 mm × 300 mm soda lime glass (SLG) substrates. Key sputtering variables, namely power and Ar gas flow rates, were optimized to achieve best structural, electrical and optical properties. The Mo films were comprehensively characterized and found to possess high degree of thickness uniformity over large area. Best crystallinity, reflectance and sheet resistance was obtained at high sputtering powers and low argon gas flow rates, while mechanical properties like adhesion and residual stress were found to be best at low sputtering power and high argon gas flow rate, thereby indicating a need to arrive at a suitable trade-off during processing. - Highlights: • Sputtering of bilayer molybdenum thin films on soda lime glass • Large area deposition using rotating cylindrical direct current magnetron • Trade of sputter process parameters power and pressure • High uniformity of thickness and best electrical properties obtained • Suitable mechanical and optical properties of molybdenum are achieved for CIGS application.

  11. NATO Advanced Study Institute on Hamiltonian Dynamical Systems and Applications

    CERN Document Server

    2008-01-01

    Physical laws are for the most part expressed in terms of differential equations, and natural classes of these are in the form of conservation laws or of problems of the calculus of variations for an action functional. These problems can generally be posed as Hamiltonian systems, whether dynamical systems on finite dimensional phase space as in classical mechanics, or partial differential equations (PDE) which are naturally of infinitely many degrees of freedom. This volume is the collected and extended notes from the lectures on Hamiltonian dynamical systems and their applications that were given at the NATO Advanced Study Institute in Montreal in 2007. Many aspects of the modern theory of the subject were covered at this event, including low dimensional problems as well as the theory of Hamiltonian systems in infinite dimensional phase space; these are described in depth in this volume. Applications are also presented to several important areas of research, including problems in classical mechanics, continu...

  12. High frequency noise studies at the Hartousov mofette area (CZE)

    Science.gov (United States)

    Schmidt, Andreas; Flores-Estrella, Hortencia; Pommerencke, Julia; Umlauft, Josefine

    2014-05-01

    Ambient noise analysis has been used as a reliable tool to investigate sub-surface structures at seismological quiet regions with none or less specific seismic events. Here, we consider the acoustic signals from a single mofette at the Hartoušov area (CZE) as a noise-like high frequency source caused by multiple near surface degassing processes in a restricted location. From this assumption we have used different array geometries for recording at least one hour of continuous noise. We installed triangular arrays with 3 component geophones: the first deployment consisted on two co-centric triangles with side length of 30 and 50 m with the mofette in the center; the second deployment consisted on two triangular arrays, both with side length of 30 m, co-directional to the mofette. Furthermore, we also installed profiles with 24 channels and vertical geophones locating them in different positions with respect to the mofette. In this work, we present preliminary results from the data analysis dependent on the geometry, to show the characteristics of the noise wave-field referring to frequency content and propagation features, such as directionality and surface wave velocity. The spectral analysis shows that the energy is concentrated in a frequency band among 10 and 40 Hz. However, in this interval there is no evidence of any exclusive fundamental frequencies. From this, man-induced influences can be identified as intermittent signal peaks in narrow frequency bands and can be separated to receive the revised mofette wave-field record. The inversion of dispersive surface waves, that were detected by interferometric methods, provides a velocity model down to 12 m with an S-wave velocity between 160 and 180 m/s on the uppermost layer. Furthermore, the interferometric signal properties indicate that it is not possible to characterize the mofette as a punctual source, but rather as a conglomerate of multiple sources with time and location variations.

  13. Diachronic analysis of salt-affected areas using remote sensing techniques: the case study of Biskra area, Algeria

    Science.gov (United States)

    Afrasinei, Gabriela M.; Melis, Maria T.; Buttau, Cristina; Bradd, John M.; Arras, Claudio; Ghiglieri, Giorgio

    2015-10-01

    In the Wadi Biskra arid and semi-arid area, sustainable development is limited by land degradation, such as secondary salinization of soils. As an important high quality date production region of Algeria, it needs continuous monitoring of desertification indicators, since the bio-physical setting defines it as highly exposed to climate-related risks. For this particular study, for which little ground truth data was possible to acquire, we set up an assessment of appropriate methods for the identification and change detection of salt-affected areas, involving image interpretation and processing techniques employing Landsat imagery. After a first phase consisting of a visual interpretation study of the land cover types, two automated classification approaches were proposed and applied for this specific study: decision tree classification and principal components analysis (PCA) of Knepper ratios. Five of the indices employed in the Decision Tree construction were set up within the current study, among which we propose a salinity index (SMI) for the extraction of highly saline areas. The results of the 1984 to 2014 diachronic analysis of salt - affected areas variation were supported by the interpreted land cover map for accuracy estimation. Connecting the outputs with auxiliary bio-physical and socio-economic data, comprehensive results are discussed, which were indispensable for the understanding of land degradation dynamics and vulnerability to desertification. One aspect that emerged was the fact that the expansion of agricultural land in the last three decades may have led and continue to contribute to a secondary salinization of soils. This study is part of the WADIS-MAR Demonstration Project, funded by the European Commission through the Sustainable Water Integrated Management (SWIM) Program (www.wadismar.eu).

  14. Application of carbon isotope for discriminating sources of soil CO2 in karst area, Guizhou

    Institute of Scientific and Technical Information of China (English)

    黎廷宇; 王世杰

    2001-01-01

    Using carbon isotope of soil CO2 this paper discussed the sources of soil CO2 in karst area, Guizhou Province, China. Oxidation-decomposition of organic matter, respiration of plant root and activity of microbe are thought to be the major sources of soil CO2. However, in karst area, the contribution of dissolution of underlying carbonate rock to soil CO2 should be considered as in acidic environment. Atmospheric CO2 is the major composition of soil CO2 in surface layer of soil profiles and its proportion in soil CO2 decreases with increase of soil depth. CO2 produced by dissolution of carbonate rock contributes 34%-46% to soil CO2 below the depth of 10cm in the studied soil profiles covered by grass.

  15. Catchment conceptualisation for examining applicability of chloride mass balance method in an area with historical forest clearance

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-07-01

    Full Text Available Of the various approaches for estimating groundwater recharge, the chloride mass balance (CMB method is one of the most frequently used, especially for arid and semiarid regions. Widespread native vegetation clearance, common in many areas globally, has changed the land surface boundary condition, posing the question as to whether the current system has reached new chloride equilibrium, required for a CMB application. Although a one-dimensional CMB can be applied at a point where the water and chloride fluxes are locally in steady state, the CMB method is usually applied at a catchment scale owing to significant lateral flows in mountains. The applicability of the CMB method to several conceptual catchment types of various chloride equilibrium conditions is examined. The conceptualisation, combined with some local climate conditions, is shown to be useful in assessing whether or not a catchment has reached new chloride equilibrium. The six conceptual catchment types are tested with eleven selected catchments in the Mount Lofty Ranges (MLR, a coastal hilly area in South Australia having experienced widespread historical forest clearance. The results show that six of the eleven catchments match a type VI chloride balance condition (chloride non-equilibrium with a gaining stream, with the ratios of stream chloride output (O over atmospheric chloride input (I, or catchment chloride O/I ratios, ranging from 2 to 4. Two catchments match a type V chloride balance condition (chloride non-equilibrium with a losing stream, with catchment chloride O/I ratios about 0.5. For these type V and type VI catchments, the CMB method is not applicable. The results also suggest that neither a chloride O/I ratio less than one nor a low seasonal fluctuation of streamflow chloride concentration (a factor below 4 guarantees a chloride equilibrium condition in the study area. A large chloride O/I value (above one and a large fluctuation of streamflow chloride

  16. Image analytic study of nuclear area in mantle cell lymphoma

    OpenAIRE

    Baek, Taehwa; Huh, Jooryung; Kwak, Hyoungjong; Park, Meeja; Lee, Hyekyung

    2010-01-01

    Background Malignant lymphomas are classified on the basis of morphology, immunohistochemistry, and genetic and molecular biological features. Morphology is considered the most important and basic feature. Lymphomas can be classified as small, medium, or large depending on the cell size, but this criterion tends to be rather subjective. The aim of this study was to investigate the usefulness of an objective approach based on quantitative measurements. Methods Twenty specimens of mantle cell l...

  17. A study of polluted eco-system around industrial areas

    International Nuclear Information System (INIS)

    Industrial pollution is one of the most serious problems in Pakistan. The uncontrolled release of untreated industrial effluents to large water bodies has deleterious effects on water quality, aquatic life and human health. The concentration of heavy metals in eco-system is reaching at alarming levels and is increasing yearly. In reality, the industries are not equipped with proper effluent treatment plants. The environmental protection law is not strictly implemented to limit the release and/or proper disposal of industrial effluents. Therefore, volume of specified industrial discharge is growing at an exponential rate without any specific safeguards. Effective measures, which can eliminate or considerably reduce hazardous factors from the human environment to minimize the associated health risks, must be identified and eradicated. In order to achieve these objectives, the study has been done to reach a balanced assessment of the risks and benefits involved. For this purpose two industrial cities of Pakistan namely, Gujranwala and Faisalabad have been selected. Four major industries existing in these cities, namely Yam, textile, paper and board and ceramics, have been studied. The specimens of the irrigated soil exposed to the industrial effluent, crops and vegetables grown on that soil have been analyzed study the hazardous effects on human health. (author)

  18. [Quantitative estimation of area parameters (with representatives of genus rana as a case study)].

    Science.gov (United States)

    Puzachenko, Iu G; Kuz'min, S L; Sandlerskiĭ, R B

    2011-01-01

    A quantitative method of species "point" area analysis is considered that provides the interpolation of species distribution to the whole territory on the basis of its relationships with climatic and relief variables. It is shown that application of standart statistical interpolation techniques is incorrect. The proposed approach is based on interpolation onto the whole territory the species-specific relations with environmental variables detected in single "points". The basic method for the task proves to be the factor analysis. Within the scope of the study, we have considered the methods for quantitative representation of species relationships with climatic and relief variables. The analysis efficiency is demonstrated by an example of three species of brown frogs: Rana temporaria, R. arvalis u R. amurensis. PMID:22121573

  19. Application of Poisson kriging to the mapping of cholera and dysentery incidence in an endemic area of Bangladesh

    Directory of Open Access Journals (Sweden)

    Haq M Zahirul

    2006-10-01

    Full Text Available Abstract Background Disease maps can serve to display incidence rates geographically, to inform on public health provision about the success or failure of interventions, and to make hypothesis or to provide evidences concerning disease etiology. Poisson kriging was recently introduced to filter the noise attached to rates recorded over sparsely populated administrative units. Its benefit over simple population-weighted averages and empirical Bayesian smoothers was demonstrated by simulation studies using county-level cancer mortality rates. This paper presents the first application of Poisson kriging to the spatial interpolation of local disease rates, resulting in continuous maps of disease rate estimates and the associated prediction variance. The methodology is illustrated using cholera and dysentery data collected in a cholera endemic area (Matlab of Bangladesh. Results The spatial analysis was confined to patrilineally-related clusters of households, known as baris, located within 9 kilometers from the Matlab hospital to avoid underestimating the risk of disease incidence, since patients far away from the medical facilities are less likely to travel. Semivariogram models reveal a range of autocorrelation of 1.1 km for dysentery and 0.37 km for cholera. This result translates into a cholera risk map that is patchier than the dysentery map that shows a large zone of high incidence in the south-central part of the study area, which is quasi-urban. On both maps, lower risk values are found in the Northern part of the study area, which is also the most distant from the Matlab hospital. The weaker spatial continuity of cholera versus dysentery incidence rates resulted in larger kriging variance across the study area. Conclusion The approach presented in this paper enables researchers to incorporate the pattern of spatial dependence of incidence rates into the mapping of risk values and the quantification of the associated uncertainty. Differences

  20. Commercial gasifier for IGCC applications study report

    Energy Technology Data Exchange (ETDEWEB)

    Notestein, J.E.

    1990-06-01

    This was a scoping-level study to identify and characterize the design features of fixed-bed gasifiers appearing most important for a gasifier that was to be (1) potentially commercially attractive, and (2) specifically intended for us in integrated coal gasification/combined-cycle (IGCC) applications. It also performed comparative analyses on the impact or value of these design features and on performance characteristics options of the whole IGCC system since cost, efficiency, environmental traits, and operability -- on a system basis -- are what is really important. The study also reviewed and evaluated existing gasifier designs, produced a conceptual-level gasifier design, and generated a moderately advanced system configuration that was utilized as the reference framework for the comparative analyses. In addition, technical issues and knowledge gaps were defined. 70 figs., 31 tabs.

  1. Study and application of temporal index technology

    Institute of Scientific and Technical Information of China (English)

    YE XiaoPing; TANG Yong; CHEN LuoWu; GUO Huan; ZHU Jun; CHEN KaiYuan

    2009-01-01

    This paper addresses the mathematical relation on a set of periods and temporal indexing constructions as well as their applications. First we introduce two concepts, i.e. the temporal connection and temporal inclusion, which are equivalence relation and preorder relation respectively. Second, by studying some basic topics such as the division of "large" equivalence classes and the overlaps of preorder relational sets, we propose a temporal data index model (TDIM) with a tree-structure consisting of a root node, equivalence class nodes and linearly ordered branch nodes. Third, we study algorithms for the temporal querying and incremental updating as well as dynamical management within the framework of TDIM. Based on a proper mathematical supporting, TDIM can be applied to researching some significant practical cases such as temporal relational and temporal XML data and so on.

  2. Study of large area Hamamatsu avalanche photodiode in a γ-ray scintillation detector

    International Nuclear Information System (INIS)

    We have carried out study of a large area (10x10mm2), reverse-type avalanche photodiode (APD) recently developed by Hamamatsu photonics. It has low dark current of 3nA at room temperature, and the gain stability was almost the same as prototypical APDs reported in our previous paper. We studied the performance as a γ-ray detector with four scintillators, CsI(Tl), BGO, GSO(Ce), and YAP(Ce) crystals. For example we obtained the best energy resolution of 4.9±0.2% (FWHM) for 662keV γ-rays, as measured with a 10x10x10mm3 CsI(Tl) crystal. The minimum detectable energy was as low as 10keV at 20-bar C and 3.1keV at -20-bar C. Thanks to its large effective area, this APD can effectively read out photons from larger size scintillators. When coupling to a 300x48mm2 BGO plate of 3mm thickness, an FWHM energy resolution of 20.9±0.2% was obtained for 662keV γ-rays, with the minimum detectable energy of about 60keV at -150C. These results suggest that our prototype APD can be a promising device for various applications replacing traditional PMTs such as use in space for Japan's future X-ray astronomy mission NeXT

  3. Optimum BET surface areas for activated carbon produced from textile sewage sludges and its application as dye removal.

    Science.gov (United States)

    Kacan, Erdal

    2016-01-15

    The purpose of this experimental study is to determine optimum preparation conditions for activated carbons obtained from textile sewage sludge (TSS) for removal of dyes from aqueous solutions. The textile sewage sludge activated carbon (TSSAC) was prepared by chemical activation with potassium hydroxide using Response Surface Methodology (RSM). The most influential factor on each experimental design responses was identified via ANNOVA analysis. Based on the central composite design (CCD), quadratic model was developed to correlate the preparation variables for one response which is the Brunauer-Emmelt-Teller (BET) surface area. RSM based on a three-variable CCD was used to determine the effect of pyrolyzed temperature (400-700 °C), carbonization time (45-180 min) and KOH: weight of TSS (wt%) impregnation ratio (0.5:1-1.5:1) on BET surface area. According to the results, pyrolyzed temperature and impregnation ratio were found as the significant factors for maximizing the BET surface area. The major effect which influences the BET surface area was found as pyrolyzed temperature. Both carbonization time and impregnation ratio of KOH had no significant effect. The optimum conditions for preparing TSSAC, based on response surface and contour plots, were found as follows: pyrolyzed temperature 700 °C, carbonization time of 45 min and chemical impregnation ratio of 0.5. The maximum and optimum BET surface area of TSSAC were found as 336 m(2)/g and 310.62 m(2)/g, respectively. Synozol Blue reactive (RSB) and Setapers Yellow-Brown (P2RFL) industrial textile dyes adsorption capacities were investigated. As expected the TSSAC which has the biggest BET surface area (336 m(2)/g) adsorbed dye best. The maximum (RSB) and (P2RFL) uptake capacities were found as 8.5383 mg/g and 5.4 mg/g, respectively. The results of this study indicated the applicability of TSSAC for removing industrial dyes from aqueous solution. PMID:26496841

  4. Facilitating students' application of the integral and the area under the curve concepts in physics problems

    Science.gov (United States)

    Nguyen, Dong-Hai

    concepts to physics problems. The results of this project provide broader and deeper insights into students' problem solving with the integral and the area under the curve concepts and suggest strategies to facilitate students' learning to apply these concepts to physics problems. This study also has significant implications for further research, curriculum development and instruction.

  5. Quantitative Application Study on Remote Sensing of Suspended Sediment

    Institute of Scientific and Technical Information of China (English)

    CHEN Yi-mei; XU Su-dong; LIN Qiang

    2012-01-01

    Quantitative application on remote sensing of suspended sediment is an important aspect of the engineering application of remote sensing study.In this paper,the Xiamen Bay is chosen as the study area.Eleven different phases of the remote sensing data are selected to establish a quantitative remote sensing model to map suspended sediment by using remote sensing images and the quasi-synchronous measured sediment data.Based on empirical statistics developed are the conversion models between instantaneous suspended sediment concentration and tidally-averaged suspended sediment concentration as well as the conversion models between surface layer suspended sediment concentration and the depth-averaged suspended sediment concentration.On this basis,the quantitative application integrated model on remote sensing of suspended sediment is developed.By using this model as well as multi-temporal remote sensing images,multi-year averaged suspended sediment concentration of the Xiamen Bay are predicted.The comparison between model prediction and observed data shows that the multi-year averaged suspended sediment concentration of studied sites as well as the concentration difference of neighboring sites can be well predicted by the remote sensing model with an error rate of 21.61% or less,which can satisfy the engineering requirements of channel deposition calculation.

  6. Application of radioimmunoassay methods for malaria detection in two selected endemic areas in the Philippines

    International Nuclear Information System (INIS)

    Radioimmunoassay (RIA) technique was used with the synthetic peptide, (NANP)3 in detecting anti-sporozoite antibody (against Plasmodium falcifarum) in serum of persons residing in two (2) endimic areas in the Philippines. entomological surveys for sporozoite detection in mosquito vectors utilizing monoclonal antibodies (2A10 for P. falciparum and 2F2 for P. vivax) were likewise conducted in the same areas where serological surveys were performed. These two areas are located on separate islands, with varying malaria transmission seasons and levels of endemicity. Initial findings showed positive response to the CSP antigen (NANP)3 in detecting anti - P. falciparum antibodies in sera. Infection with sporozoites of P. falciparum and P. vivax in mosquito vectors were detected using monoclonal antibodies 2A10 and 2F2 respectively. The latter procedure was shown to be more sensitive than dissection of mosquito salivary glands. Initial study shows a heightened level of anti-(NANP)3 antibodies in both populations prior to the generally accepted peak of malaria season indicating that RIA with CSP antigen and specific MAbs can be a useful epidemiological tool for understanding the dynamics of malaria transmission as well as in monitoring control programmes based on reducing manvector contact. (author) 15 refs.,12 tabs

  7. Karnes County, Texas, area hydrogeochemical and stream uranium orientation study

    International Nuclear Information System (INIS)

    Samples of ground water, stream water, suspended stream sediment, and stream-bed sediment were collected over and near a blind, undeveloped roll-front deposit of uranium in Karnes County, Texas. Dissolved oxygen, pH, Eh, conductivity, temperature, nitrate, ammonia, phosphate, and sulfate in water were measured in the field. Uranium was determined in all samples in the laboratory by neutron activation analysis. The results of the study indicate that ground water may be the preferred sampling medium for geochemical reconnaissance for South Texas roll-front deposits of uranium

  8. Legacy data for a northern prairie grassland: Woodworth Study Area, North Dakota, 1963-89

    Science.gov (United States)

    Williams, Shelby H.; Austin, Jane E.

    2014-01-01

    Ecological data commonly become more valuable through time. Such legacy data provide baseline records of past biological, physical, and social information that provide historical perspective and are necessary for assessment of stasis or change. Legacy data collected at the Woodworth Study Area (WSA), a contiguous block of grasslands, croplands, and wetlands covering more than 1,000 hectares of the Prairie Pothole Region of North Dakota, are cataloged and summarized in this study. The WSA is one of the longest researched grassland sites in the Upper Midwest. It has an extensive history of settlement, land use, and management that provides a deeper context for future research. The WSA data include long-term vegetation transect records, land use history, habitat management records, geologic information, wetland hydrology and chemistry information, and spatial images. Substantial parts of these data have not been previously reported. The WSA is representative of many other lands purchased by the U.S. Fish and Wildlife Service in the Prairie Pothole Region from the 1930s to the 1970s; therefore, synthesized data from the WSA are broadly applicable to topics of concern in northern grasslands, such as increases in non-native plants, managing for biodiversity, and long-term effects of habitat management. New techniques are also described that were used to preserve these data for future analyses. The data preservation techniques are applicable to any project with data that should be preserved for 100 years or more.

  9. Radiation protection study of radiology medical workers in radiodiagnosis area

    International Nuclear Information System (INIS)

    Aspects related to radiological safety and its organization in radiodiagnosis were evaluated by means of scanning carried out in 18 hospitals of Mexico City, divided in 11 public institutions and 7 private ones. The population being studied was: hospital personnel that works in radiodiagnosis. The survey was made with 31 dichotomic variables, being obtained 132 surveys. The personnel characteristics are 83% works in public institutions, 49% works in radiodiagnosis, 3% has an academic degree, 13% is member of a hospital professional association, 13% has updated information on radiological protection, 36% was trained, 45% works for more than 2 years, 52% uses personal dosemeter, less than the 20% knows about the fundamentals of the radiological protection and 24% states to suffer from biological radiation effects, due to the exposure to x-rays. As result of the study, it was found that the main problems that the radiological protection has, are: lack of training programs in radiological protection and supervision, medical surveillance and the few number of persons that takes part in clinical meetings and professional associations. (authors). 7 refs., 3 tabs

  10. Imaging polar and dipolar sources of geophysical anomalies by probability tomography. Part II: Application to the Vesuvius volcanic area

    CERN Document Server

    Mauriello, P; Mauriello, Paolo; Patella, Domenico

    2006-01-01

    In the previous part I, we have developed the generalized theory of the probability tomography method to image polar and dipolar sources of a vector or scalar geophysical anomaly field. The purpose of the new method was to improve the core-and-boundary resolution of the most probable buried sources of the anomalies detected in a datum domain. In this paper, which constitutes the part II of the same study, an application of the new approach to the Vesuvius volcano (Naples, Italy) is illustrated in detail by analyzing geoelectrical, self-potential and gravity datasets collected over the whole volcanic area. The purpose is to get new insights into the shallow structure and hydrothermal system of Vesuvius, and the deep geometry of the tectonic depression within which the volcano grew.

  11. Development of compact divertor plasma simulator in radiation controlled area and its application to tungsten material

    International Nuclear Information System (INIS)

    We have developed a compact divertor plasma simulator (CDPS) for plasma-material interaction study of neutron damaged tungsten material. The CDPS, having smaller space requirement and lower electric power consumption, is able to be operated in the existing radiation controlled area. The CDPS can generate a steady state deuterium plasma more than 1018 m-3. The sample stage equipped with an air-cooling system makes the sample temperature almost constant during plasma exposure. Further the plasma-irradiated sample can be transported to the infrared heater for Thermal Deposition Spectroscopy (TDS) analysis without air exposure. (author)

  12. Two designs for image digital processing applications in the nuclear area using ImaWin

    International Nuclear Information System (INIS)

    In this work two designs of image processing systems of low cost for the nuclear area are presented. They have the advantage of the adaptability given by the ImaWin software and the connection with Internet, applied to digitalisation in research and development fields. The first design is the development of a digitalisation system for inspection and study of fuel plate radiographs for test reactors, while the second one describes the specification and design of an intelligent system of intrusion signals continuous inspection and administrative control of fissile material deposits. (author)

  13. Improved aerosol retrieval algorithm using Landsat images and its application for PM10 monitoring over urban areas

    Science.gov (United States)

    Luo, Nana; Wong, Man Sing; Zhao, Wenji; Yan, Xing; Xiao, Fei

    2015-02-01

    Aerosol retrieval using MODerate resolution Imaging Spectroradiometer (MODIS) has been well researched over the past decade. However, the application is limited to global- and regional-scale studies, which may not be applicable for urban areas due to its low spatial resolution. To overcome the limitation, this paper proposed an improved aerosol retrieval algorithm for Landsat images (ImAero-Landsat) at spatial resolution of 30 m. This ImAero-Landsat algorithm has been improved in the following two aspects: (i) it does not require a comprehensive look up table and thus it is more efficient in AOT retrieval; and (ii) it can be operated in both bright and dark surfaces. The derived aerosol optical thickness (AOT) images were validated with AErosol RObotic NETwork (AERONET) measurements as well as MODIS MOD04 AOT products. Small root mean square errors (RMSEs) of 0.11 and 0.14 and mean absolute difference (MAD) of 0.07 and 0.11 between ImAero-Landsat AOT, with MODIS MOD04 and AERONET products were observed. By correlating with ground based PM10 concentrations, the ImAero-Landsat method outperforms (r2 = 0.32) than MOD04 AOT products (r2 = 0.23). In addition, the accuracy of estimating PM10 can be improved to r2 = 0.55 when the derived AOT was integrated with meteorological parameters. The accuracy is similar to the results derived from AERONET AOT (r2 = 0.62). This study offers a simple and accurate method to investigate aerosol optical thickness at detailed city-scale. Environmental authorities may use the derived methods for deriving aerosol distribution maps and pinpointing the sources of pollutants in urban areas.

  14. Fractal and Multifractal Modeling of Hydrothermal Mineral Deposit Spectrum: Application to Gold Deposits in Abitibi Area, Ontario,Canada

    Institute of Scientific and Technical Information of China (English)

    Cheng Qiuming

    2003-01-01

    A number of fractal/muitifractal methods are introduced for quantifying the mineral deposit spectrum which include a number-size model, grade-tonnage model, power spectrum model, multifractal model and an eigenvalue spectrum model. The first two models characterize mineral deposits spectra based on relationships among the measures of mineral deposits. These include the number of depesits,size of deposits, concentration and volume of mineral deposits. The last three methods that deal with the spatial-temporal spectra of mineral deposit studies are all expected to be popularized in near future. A case study of hydrothermal gold deposits from the Abitibi area, a world-class mineral district, is used to demonstrate the principle as well as the applications of methods proposed in this paper. It has been shown that fractal and multifractal models are generally applicable to modeling of mineral deposits and occurrences. Clusters of mineral deposits were identified by several methods including the power spectral analysis, singularity analysis and the eigenvalue analysis. These clusters contain most of the known mineral deposits in the Timmins and Kirkland Lake camps.

  15. Application of remote sensing technology for studying littoral sediment dynamics

    Digital Repository Service at National Institute of Oceanography (India)

    Kunte, P.D.; Wagle, B.G.

    in southwest direction in area 'A' and in southeast direction in area 'B', and (3) qualitative estimates of suspended sediments and their movements can be well studied with the help of satellite remote sensing technology. Thus, the present study demonstrates...

  16. Human genetic studies in areas of high natural radiation

    International Nuclear Information System (INIS)

    Data have been obtained by a genetic-epidemiological survey of a population living in the State of Espirito Santo (Brazil), and subjected to mean levels of natural radiation, per locality, ranging from 7 to 133 μrad/hr. Multiple regression models have been applied to the data, and the results showed no detectable effect of natural radiation on the sex ratio at birth, on the occurrence of congenital anomalies, and on the numbers of pregnancy terminations, stillbirths, livebirths, and post-infant mortality in the children, as well as fecundity and fertility of the couples (these observations contradict some data from the literature, based on official records and without analyses of the concomitant effects of other variables). However, nonsignificant results cannot be considered as disproving harmful effects of natural radiation on mortality and morbidity. These results may simply mean that other causes of mortality and morbidity are so important, under the conditions of the study, that the contribution of low-level, chronic natural radiation is made negligible. (author)

  17. Groundwater pollution studies in Lahore urban area - isotope hydrochemical approach

    International Nuclear Information System (INIS)

    Present study was undertaken to assess the levels and sources of groundwater pollution in Lahore aquifer. Water samples collected on periodical basis from existing hand pumps, tube wells and drains were analyzed for chemical constituents (Na, K, Ca, Mg, Fe, Cl, HCO/sub 3/, CO/sub 3/, NO/sub 3/, SO/sub 4/). Selected samples were analyzed for isotopic composition (C/sup 13/, N/sup 15/) and Coliform bacteria also. The data show that quality of groundwater has significantly deteriorated at most of the locations and concentrations of several parameters are higher than WHO criteria of good quality drinking water. An increase in nitrate concentrations especially in shallow groundwater (10 to 188 mg/l) was noted. Highly enriched delta N/sup 15/ values of high nitrate water samples (+10.3 to +25.1%) indicate that nitrates are derived from domestic wastes thrown into sewage drains. Penetration of polluted water from sewerage drains was also confirmed on the basis of delta C/sup 13/ and Fecal Coliform data (0-26 coliform/100 ml of sample). (author)

  18. Reconfigurable hardware applications on NetFPGA for network monitoring in large area sensor networks

    International Nuclear Information System (INIS)

    A valuable functionality for sensor networks, distributed in large volumes is the capability to characterize and analyze the data traffic at wire speed and monitor the data prior to committing to permanent storage. As a demonstrator we use a reconfigurable hardware router for real-time monitoring of data before their transmission to further processing and storage. The reconfigurable hardware router is based on the NetFPGA platform. In this study we report on the hardware implementation to monitor web-based network applications and compare our results with a software based network analyzer

  19. Fusion Applications and Market Evaluation (FAME) study

    Energy Technology Data Exchange (ETDEWEB)

    Bourque, R.F.; Schultz, K.R.

    1988-02-01

    This report discusses the known applications of fusion energy and estimates possible markets. Because fusion reactors can generate surplus neutrons (10 times greater than fission), other valuable products can be made besides thermal energy for electrical power. The purpose of this study was to explore the many other products that could result from neutronic interactions, from the volumetric nature of nuclear heating, and from the utilization of electromagnetic and charged particle energy. Even with other products being sold, electricity is the major product of the neutron thermal energy and sale of it is generally required for acceptable economics. Other products that are either unique to fusion or can be generated in great quantities that are otherwise unattainable are: (1) fissile fuels, (2) tritium, (3) radioisotopes, especially /sup 60/Co is expected to grow substantially as the food irradiation industry matures. To a limited extent, the fusion neutrons might also be used to transmute fission waste and for radiation testing sources. The thermal energy from fusion reactors can be used for nonelectrical applications such as synthetic fuel production, industrial process heat, and district heating. Inherently safe reactor designs with low activity materials could be sited near the thermal energy user. Finally, in the long term, the high energy content of fusion fuel makes it an interesting possibility as a power source for deep space missions.

  20. CEP action area studies : City of Yellowknife fleet review

    International Nuclear Information System (INIS)

    The City of Yellowknife maintains a fleet of vehicles and equipment used for public service. Yellowknife's Community Energy Plan (CEP) has a goal to reduce Yellowknife's fleet fuel consumption and greenhouse gas (GHG) emissions by 20 per cent within 10 years. This report examined current fuel consumption for the City of Yellowknife's fleet based on available data and examined options to reduce fleet fuel consumption. It also quantified the reduction in fuel consumption, GHG emissions, as well as the financial impacts of various options. An overview of the City of Yellowknife's fleet of vehicles and equipment was first provided, as well as calculated annual values for fuel consumption, GHG emissions, and energy consumption for the City of Yellowknife's fleet. Two fleet management case studies were presented. Fuel-efficient vehicles on the market that could provide an opportunity to replace some of the City of Yellowknife's fleet of light vehicles, and bylaw vehicles with fuel-efficient vehicles were discussed. These vehicles include hybrid vehicles, smart cars, compressed natural gas vehicles, and compressed-air vehicles. Equipment maintenance for tires, preventive, synthetic oils, and driver training programs were discussed. Anti-idling campaigns and technologies were also examined. The report concluded with a discussion of renewable fuels such as biodiesel and ethanol blended gasoline. Fleet fuel consumption, GHG and financial impacts were provided for each chapter heading. It was concluded that if all of the measures identified in the report were implemented, an overall decrease in GHG emissions of approximately 15 per cent would be achieved. 15 refs., 8 tabs., 8 figs

  1. Securing While Sampling in Wireless Body Area Networks With Application to Electrocardiography.

    Science.gov (United States)

    Dautov, Ruslan; Tsouri, Gill R

    2016-01-01

    Stringent resource constraints and broadcast transmission in wireless body area network raise serious security concerns when employed in biomedical applications. Protecting data transmission where any minor alteration is potentially harmful is of significant importance in healthcare. Traditional security methods based on public or private key infrastructure require considerable memory and computational resources, and present an implementation obstacle in compact sensor nodes. This paper proposes a lightweight encryption framework augmenting compressed sensing with wireless physical layer security. Augmenting compressed sensing to secure information is based on the use of the measurement matrix as an encryption key, and allows for incorporating security in addition to compression at the time of sampling an analog signal. The proposed approach eliminates the need for a separate encryption algorithm, as well as the predeployment of a key thereby conserving sensor node's limited resources. The proposed framework is evaluated using analysis, simulation, and experimentation applied to a wireless electrocardiogram setup consisting of a sensor node, an access point, and an eavesdropper performing a proximity attack. Results show that legitimate communication is reliable and secure given that the eavesdropper is located at a reasonable distance from the sensor node and the access point. PMID:25373134

  2. Robust control of integrated motor-transmission powertrain system over controller area network for automotive applications

    Science.gov (United States)

    Zhu, Xiaoyuan; Zhang, Hui; Cao, Dongpu; Fang, Zongde

    2015-06-01

    Integrated motor-transmission (IMT) powertrain system with directly coupled motor and gearbox is a good choice for electric commercial vehicles (e.g., pure electric buses) due to its potential in motor size reduction and energy efficiency improvement. However, the controller design for powertrain oscillation damping becomes challenging due to the elimination of damping components. On the other hand, as controller area network (CAN) is commonly adopted in modern vehicle system, the network-induced time-varying delays that caused by bandwidth limitation will further lead to powertrain vibration or even destabilize the powertrain control system. Therefore, in this paper, a robust energy-to-peak controller is proposed for the IMT powertrain system to address the oscillation damping problem and also attenuate the external disturbance. The control law adopted here is based on a multivariable PI control, which ensures the applicability and performance of the proposed controller in engineering practice. With the linearized delay uncertainties characterized by polytopic inclusions, a delay-free closed-loop augmented system is established for the IMT powertrain system under discrete-time framework. The proposed controller design problem is then converted to a static output feedback (SOF) controller design problem where the feedback control gains are obtained by solving a set of linear matrix inequalities (LMIs). The effectiveness as well as robustness of the proposed controller is demonstrated by comparing its performance against that of a conventional PI controller.

  3. A heat island model for large urban areas and its application to Milan

    International Nuclear Information System (INIS)

    The study of the urban heat island has been carried out through two enhanced versions of the UCLM (urban canopy layer model) model, Landsat/Thematic Mapper data sets and meteorological data collected over a square area 30 km of side including Milan and its hinterland (Italy). The urban climate can be describe in different summer and winter radiative settings. The input data are divided into two classes: 1, parameters related to urban and rural properties; 2, meteorological data related to the general synoptic conditions. The bulk system of the model is made up of four independent equations expressed in terms of four unknowns, i.e., the temperature values at ground level, canopy level and reference level (100 m) and relative humidity within the urban structure. The study area is divided by a regular square mesh of variable dimension; both the input and output data are average cell values. UCLM30 and UCLM60 calculate the temperature excess as well as the turbulent heat exchanges and the heat storage in the urban canopy as a function of the radiative and dynamic forcing. As can be observed in reality, the model shows that in summer the highest urban heating occurs in early morning and after sunset and that, in extreme conditions, the temperature can be up to 80 C warmer in town than in the nearby rural lands

  4. Real time PCR. Application in dengue studies

    Directory of Open Access Journals (Sweden)

    Jeanette Prada-Arismendy

    2011-06-01

    Full Text Available PCR (polymerase chain reaction is a routinely used tool in every diagnostic and research laboratory. This technique has been used in detection of mutations and pathogens, forensic investigation, and even is the base tool for human genome sequencing. A modification of PCR technique, real time PCR, allows the quantification of nucleic acids with higher sensibility, specificity and reproducibility. This article is intended to clarify the foundations of real-time PCR, using an application model for virology. In the actual work, it was quantified the viral load of dengue virus serotype 2 produced from infected murine macrophages; the obtained results in this work established that murine strain BALB/c presents a greater susceptibility to dengue virus infection, which establishes BALB/c murine strain as a best model of study for investigation of dengue virus infection physiopathology.

  5. Catchment conceptualisation for examining applicability of chloride mass balance method in an area of historical forest clearance

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-11-01

    Full Text Available Among various approaches for estimating groundwater recharge, chloride mass balance (CMB method is one of the most frequently used, in particular, for arid and semiarid regions. Widespread native vegetation clearance, common history in many areas globally, has changed land surface boundary condition, posing a question whether the current system has reached new chloride equilibrium for CMB application. To examine CMB applicability for catchments, conceptual catchment types of various chloride equilibrium conditions are defined. The conceptualization, combined with some local climate conditions, is demonstrated to be useful in examining whether a catchment has reached new chloride equilibrium. The six conceptual catchment types are tested with eleven selected catchments in the Mount Lofty Ranges (MLR, a coastal hilly area in South Australia having experienced historical widespread forest clearance. The results show that six of the eleven catchments match type VI chloride balance condition (chloride non-equilibrium with a gaining stream, with the ratio of stream chloride output over atmospheric chloride input (catchment chloride O/I ranging from 2 to 4. Two catchments match type V chloride balance condition (chloride non-equilibrium with a losing stream, with catchment chloride O/I values about 0.5. For these catchments, the CMB method is not appropriate to apply. The results also suggest that neither a below-one chloride O/I value nor a low seasonal fluctuation of streamflow chloride concentration (a factor below 4 guarantees a chloride equilibrium condition in the study area. But a large chloride O/I value (above one and a large fluctuation of streamflow chloride concentration (a factor of 10 and above generally indicates either a chloride disequilibrium, or cross-catchment water transfer, or both, for which CMB is not applicable. Based on the regression between chloride O/I values and annual precipitation for type VI catchments, a catchment with

  6. Added economic value of limited area multi-EPS weather forecasting applications

    Directory of Open Access Journals (Sweden)

    Alex Deckmyn

    2012-07-01

    Full Text Available We compare the GLAMEPS system, a pan-European limited area ensemble prediction system, with ECMWF's EPS over Belgium for an extended period from March 2010 until the end of December 2010. In agreement with a previous study, we find GLAMEPS scores considerably better than ECMWF's EPS. To compute the economic value, we introduce a new relative economic value score for continuous forecasts. The added value of combining the GLAMEPS system with the LAEF system over Belgium is studied. We conclude that adding LAEF to GLAMEPS increases the value, although the increase is small compared to the improvement of GLAMEPS to ECMWF's EPS. As an added benefit we find that the combined GLAMEPS-LAEF multi-EPS system is more robust, that is, it is less vulnerable to the (accidental removal of one of its components.

  7. Femtosecond infrared spectroscopy: study, development and applications

    International Nuclear Information System (INIS)

    This work has been devoted to the development and the applications of a new technique of infrared (5-20 μm) spectroscopy allowing a temporal resolution of 100 fs. This technique relies on a source of ultrashort infrared pulses obtained by frequency mixing in a nonlinear material. In particular, the optical rectification of 12-fs visible pulses in gallium arsenide has allowed us to obtain 40-fs infrared pulses with a spectrum extending from 5 pm up to 15 μm. Spectral resolution has been achieved by Fourier transform spectroscopy, using a novel device we have called Diffracting FTIR. These developments allow to study inter-subband transitions in quantum-well structures. The inter-subband relaxation time has been measured by a pump-probe experiment, in which the sample was excited with a visible pulse, and the variations of inter-subband absorption probed with an infrared pulse. Besides, we have developed a method of coherent emission spectroscopy allowing to monitor the electric field emitted by coherent charge oscillations in quantum wells. The decay of the oscillations due to the loss of coherence between excited levels yields a direct measurement of the dephasing time between these levels. Other applications include biological macromolecules like reaction centers of photosynthetic bacteria. We have shown that we were able to monitor variations of infrared absorption of about 10-4 optical densities with a temporal resolution of 100 fs. This would constitute a relevant tool to study the role of molecular vibrations during the primary steps of biological processes. (author)

  8. 76 FR 77985 - Applications for New Awards; Graduate Assistance in Areas of National Need

    Science.gov (United States)

    2011-12-15

    ... described in this notice. After you electronically submit your application, you will receive from Grants.gov.... If you submit an application after 4:30:00 p.m., Washington, DC time, on the application deadline... will contact you after a determination is made on whether your application will be accepted. Note:...

  9. A Study of IEEE 802.15.4 Security Framework for Wireless Body Area Networks

    OpenAIRE

    Kyung Sup Kwak; Sana Ullah; Shahnaz Saleem

    2011-01-01

    A Wireless Body Area Network (WBAN) is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE) applications. Since WBAN nodes are used to collect sensitive (life-critical) information and may operate in hostile environments, they require strict security mechanisms to prevent mal...

  10. Isotopes based assessment of groundwater renewal and related anthropogenic effects in water scarce areas: Sand dunes study in Qasim area, Saudi Arabia

    International Nuclear Information System (INIS)

    The investigation of recharge in the sand dune, Qasim, Saudi Arabia, with the help of chloride concentration and isotope content has revealed inconsistent pattern and less homogeneity. Monotonic chloride concentration and isotope content was the result of seasonal recharge occurrence in the study area. In addition, applying chloride mass-balance method, recharge rate calculation in the sand dune site, Qasim, Saudi Arabia, was made. The results (1.80 and 1.84mmy-1 - dune site) estimated during this project using this method was a long way below the recharge rates (30mmy-1 , 13.4mmy-1 in the dune site and 5mmy-1 in the swale site) obtained with the application of tritium method in the previous years (1994 and 1996). 1.80 and 1.84mmy-1 was for CRP-Saud-9405 project and was calculated 1997 and 1998 respectively. The reason for the lower recharge rate with the application of chloride mass-balance method could be the source of chloride input and high evaporation, which causes accumulation of chloride salts in the area. (author)

  11. Impact of regional afforestation on climatic conditions in metropolitan areas: case study of Copenhagen

    Science.gov (United States)

    Stysiak, Aleksander Andrzej; Bergen Jensen, Marina; Mahura, Alexander

    2016-04-01

    Like most other places, European metropolitan areas will face a range of climate-related challenges over the next decades that may influence the nature of urban life across the continent. Under future urbanization and climate change scenarios the well-being and comfort of the urban population might become progressively compromised. In urban areas, the effects of the warming climate will be accelerated by combination of Urban Heat Island effect (UHI) and extreme heat waves. The land cover composition directly influences atmospheric variability, and can either escalate or downscale the projected changes. Vegetation, forest ecosystems in particular, are anticipated to play an important role in modulating local and regional climatic conditions, and to be vital factor in the process of adapting cities to warming climate. This study investigates the impact of forest and land-cover change on formation and development of temperature regimes in the Copenhagen Metropolitan Area (CPH-MA). Potential to modify the UHI effect in CPH-MA is estimated. Using 2009 meteorological data, and up-to-date 2012 high resolution land-cover data we employed the online integrated meteorology-chemistry/aerosols Enviro-HIRLAM (Environment - High Resolution Limited Area Model) modeling system to simulate air temperature (at 2 meter height) fields for a selected period in July 2009. Employing research tools (such as METGRAF meteorological software and Geographical Information Systems) we then estimated the influence of different afforestation and urbanization scenarios with new forests being located after the Danish national afforestation plan, after proximity to the city center, after dominating wind characteristics, and urbanization taking place as densification of the existing conurbation. This study showed the difference in temperature up to 3.25°C, and the decrease in the spatial extent of temperature fields up to 68%, depending on the selected scenario. Performed simulations demonstrated

  12. Application of a distributed hydrological model to the design of a road inundation warning system for flash flood prone areas

    Science.gov (United States)

    Versini, P.-A.; Gaume, E.; Andrieu, H.

    2010-04-01

    This paper presents an initial prototype of a distributed hydrological model used to map possible road inundations in a region frequently exposed to severe flash floods: the Gard region (South of France). The prototype has been tested in a pseudo real-time mode on five recent flash flood events for which actual road inundations have been inventoried. The results are promising: close to 100% probability of detection of actual inundations, inundations detected before they were reported by the road management field teams with a false alarm ratios not exceeding 30%. This specific case study differs from the standard applications of rainfall-runoff models to produce flood forecasts, focussed on a single or a limited number of gauged river cross sections. It illustrates that, despite their lack of accuracy, hydro-meteorological forecasts based on rainfall-runoff models, especially distributed models, contain valuable information for flood event management. The possible consequences of landslides, debris flows and local erosion processes, sometimes associated with flash floods, were not considered at this stage of development of the prototype. They are limited in the Gard region but should be taken into account in future developments of the approach to implement it efficiently in other areas more exposed to these phenomena such as the Alpine area.

  13. Catchment conceptualisation for examining applicability of chloride mass balance method in an area of historical forest clearance

    OpenAIRE

    H. Guan; Love, A.; C. T. Simmons; Ding, Z; Hutson, J

    2009-01-01

    Among various approaches for estimating groundwater recharge, chloride mass balance (CMB) method is one of the most frequently used, in particular, for arid and semiarid regions. Widespread native vegetation clearance, common history in many areas globally, has changed land surface boundary condition, posing a question whether the current system has reached new chloride equilibrium for CMB application. To examine CMB applicability for catchments, conceptual catchment types of various chloride...

  14. Landscape and soil regionalization in southern Brazilian Amazon and contiguous areas: methodology and relevance for ecological studies

    Directory of Open Access Journals (Sweden)

    Boris Volkoff

    2012-06-01

    Full Text Available Soils of a large tropical area with differentiated landscapes cannot be treated uniformly for ecological applications. We intend to develop a framework based on physiography that can be used in regional applications. The study region occupies more than 1.1 million km² and is located at the junction of the savanna region of Central Brazil and the Amazon forest. It includes a portion of the high sedimentary Central Brazil plateau and large areas of mostly peneplained crystalline shield on the border of the wide inner-Amazon low sedimentary plain. A first broad subdivision was made into landscape regions followed by a more detailed subdivision into soil regions. Mapping information was extracted from soil survey maps at scales of 1:250000-1:500000. Soil units were integrated within a homogenized legend using a set of selected attributes such as taxonomic term, the texture of the B horizon and the associated vegetation. For each region, a detailed inventory of the soil units with their area distribution was elaborated. Ten landscape regions and twenty-four soil regions were recognized and delineated. Soil cover of a region is normally characterized by a cluster composed of many soil units. Soil diversity is comparable in the landscape and the soil regions. Composition of the soil cover is quantitatively expressed in terms of area extension of the soil units. Such geographic divisions characterized by grouping soil units and their spatial estimates must be used for regional ecological applications.

  15. Agricultural Land Use Optimal Allocation System in Developing Area:Application to Yili Watershed, Xinjiang Region

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ying; ZHANG Hongqi; NI Dongying; SONG Wei

    2012-01-01

    In developing countries,land productivity involves little market,where the agricultural land use is mainly determined by the food demands as well as the land suitability.The land use pattern will not ensure everywhere enough land for certain cropping if spatial allocation just according to land use suitability.To solve this problem,a subzone and a pre-allocation for each land use are added in spatial allocation module,and land use suitability and area optimization module are incorporated to constitute a whole agricultural land use optimal allocation (ALUOA) system.The system is developed on the platform.Net 2005 using ArcGIS Engine (version 9.2) and C# language,and is tested and validated in Yili watershed of Xinjiang Region on the newly reclaimed area.In the case study,with the help of soil data obtained from 69 points sampled in the fieldwork in 2008,main river data supplied by the Department of Water Resources of Xinjiang Uygur Autonomous Region in China,and temperature data provided by Data Center for Resources and Environmental Sciences,Chinese Academy of Sciences,land use suitability on eight common crops are evaluated one by one using linear weighted summation method in the land use suitability model.The linear programming (LP) model in area optimization model succeeds to give out land area target of each crop under three scenarios.At last,the land use targets are allotted in space both with a six subzone file and without a subzone file.The results show that the land use maps with a subzone not only ensure every part has enough land for every crop,but also gives a more fragmental land use pattern,with about 87.99% and 135.92% more patches than the one without,while at the expense of loss between 15.30% and 19.53% in the overall suitability at the same time.

  16. Application of scanning sampling for studying coatings

    Science.gov (United States)

    Surmenko, Elena L.; Tuchin, Valery V.; Sokolova, Tatiana N.; Konyushin, Alexander V.; Chebotarevsky, Yury V.

    2005-04-01

    LIBS is one of the best methods of multilayer coatings studying. Special laser technique-scanning sampling-was developed for studying of different kinds of objects (technical and biomedical coatings). The scanning sampling is based on the scanning of analyzed object during the exposition time. The velocity of scanning is defined by the diameter of laser crater and pulse repetition rate. It allows to increase the volume part of a coating substance in a sample. Some special applications of LIBS and scanning sampling with Q-switched Nd:YAG-laser in the field of technics and biomedicine are described. The layer-by-layer elemental analysis of multilayer components was performed for finding-out the probable non-uniformity. That could appear the reason of wrong work of components. Special layer characteristic calculated as a ratio of spectral lines intensities for elements contained in different layers of a coating was defined for estimation non-uniformity. LIBS in investigation of dental tissues allows to define preliminary the nature of pathology. Scanning sampling used for such tissues as debris and odontolith, allows to find out the stage of lesion and to predict carious conditions.

  17. A study on expert system applications for nuclear power plant

    International Nuclear Information System (INIS)

    The application of artificial intelligence techniques to nuclear power plants such as expert systems is rapidly emerging. expert systems can contribute significantly to the availability and the improved operation and safety of nuclear power plants. The objective of the project is to develop an expert system in a selected application area in the nuclear power plants. This project will last for 3 years. The first year's tasks are: - Information collection and literature survey on expert systems. - Analysis of several applicable areas for applying AI technologies to the nuclear power plants. - Conceptual design of a few selected domains. - Selection of hardware and software tools for the development of the expert system

  18. Multispectral thermal airborne TASI-600 data to study the Pompeii (IT) archaeological area

    Science.gov (United States)

    Palombo, Angelo; Pascucci, Simone; Pergola, Nicola; Pignatti, Stefano; Santini, Federico; Soldovieri, Francesco

    2016-04-01

    The management of archaeological areas refers to the conservation of the ruins/buildings and the eventual prospection of new areas having an archaeological potential. In this framework, airborne remote sensing is a well-developed geophysical tool for supporting the archaeological surveys of wide areas. The spectral regions applied in archaeological remote sensing spans from the VNIR to the TIR. In particular, the archaeological thermal imaging considers that materials absorb, emit, transmit, and reflect the thermal infrared radiation at different rate according to their composition, density and moisture content. Despite its potential, thermal imaging in archaeological applications are scarce. Among them, noteworthy are the ones related to the use of Landsat and ASTER [1] and airborne remote sensing [2, 3, 4 and 5]. In view of these potential in Cultural Heritage applications, the present study aims at analysing the usefulness of the high spatial resolution thermal imaging on the Pompeii archaeological park. To this purpose TASI-600 [6] airborne multispectral thermal imagery (32 channels from 8 to 11.5 nm with a spectral resolution of 100nm and a spatial resolution of 1m/pixel) was acquired on December the 7th, 2015. Airborne survey has been acquired to get useful information on the building materials (both ancient and of consolidation) characteristics and, whenever possible, to retrieve quick indicators on their conservation status. Thermal images will be, moreover, processed to have an insight of the critical environmental issues impacting the structures (e.g. moisture). The proposed study shows the preliminary results of the airborne deployments, the pre-processing of the multispectral thermal imagery and the retrieving of accurate land surface temperatures (LST). LST map will be analysed to describe the thermal pattern of the city of Pompeii and detect any thermal anomalies. As far as the ongoing TASI-600 sensors pre-processing, it will include: (a) radiometric

  19. A national study on nurses’ retention in healthcare facilities in underserved areas in Lebanon

    OpenAIRE

    El-Jardali, Fadi; Alameddine, Mohamad; Jamal, Diana; Dimassi, Hani; Dumit, Nuhad Y; McEwen, Mary K; Jaafar, Maha; Murray, Susan F.

    2013-01-01

    Background Nursing shortages and maldistribution are priority issues for healthcare systems around the globe. Such imbalances are often aggravated in underserved areas, especially in developing countries. Despite the centrality of this issue, there is a dearth of studies that examine the retention of nurses in underserved areas in the Middle East Region. This study investigates the characteristic and the factors associated with the retention of nurses working in rural areas in Lebanon. Method...

  20. THE DIRECT GEOREFERENCING APPLICATION AND PERFORMANCE ANALYSIS OF UAV HELICOPTER IN GCP-FREE AREA

    Directory of Open Access Journals (Sweden)

    C. F. Lo

    2015-08-01

    Full Text Available There are many disasters happened because the weather changes extremely in these years. To facilitate applications such as environment detection or monitoring becomes very important. Therefore, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG based Unmanned Aerial Vehicle (UAV helicopter photogrammetric platform where an Inertial Navigation System (INS/Global Navigation Satellite System (GNSS integrated Positioning and Orientation System (POS system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP. The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 meter with 100 meter flight height. The positioning accuracy in the z axis is less than 10 meter. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP generation, and feature point measurements, is less than 1 hour.

  1. The Direct Georeferencing Application and Performance Analysis of Uav Helicopter in Gcp-Free Area

    Science.gov (United States)

    Lo, C. F.; Tsai, M. L.; Chiang, K. W.; Chu, C. H.; Tsai, G. J.; Cheng, C. K.; El-Sheimy, N.; Ayman, H.

    2015-08-01

    There are many disasters happened because the weather changes extremely in these years. To facilitate applications such as environment detection or monitoring becomes very important. Therefore, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG) based Unmanned Aerial Vehicle (UAV) helicopter photogrammetric platform where an Inertial Navigation System (INS)/Global Navigation Satellite System (GNSS) integrated Positioning and Orientation System (POS) system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP). The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 meter with 100 meter flight height. The positioning accuracy in the z axis is less than 10 meter. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP) generation, and feature point measurements, is less than 1 hour.

  2. Application of fractal theory in refined reservoir description for EOR pilot area

    Energy Technology Data Exchange (ETDEWEB)

    Yue Li; Yonggang Duan; Yun Li; Yuan Lu

    1997-08-01

    A reliable reservoir description is essential to investigate scenarios for successful EOR pilot test. Reservoir characterization includes formation composition, permeability, porosity, reservoir fluids and other petrophysical parameters. In this study, various new tools have been applied to characterize Kilamayi conglomerate formation. This paper examines the merits of various statistical methods for recognizing rock property correlation in vertical columns and gives out methods to determine fractal dimension including R/S analysis and power spectral analysis. The paper also demonstrates that there is obvious fractal characteristics in conglomerate reservoirs of Kilamayi oil fields. Well log data in EOR pilot area are used to get distribution profile of parameters including permeability, porosity, water saturation and shale content.

  3. Livermore regional air quality model: II. verification and sample application in the San Francisco Bay Area

    International Nuclear Information System (INIS)

    Topographic, meteorological source emission and atmospheric pollutant concentration data have been assembled for use in verifying the LIRAQ-1 and LIRAQ-2 regional air quality models in the San Francisco Bay Area. These data, collected primarily during the high-pollution period of 26-27 July 1973, indicate that the temporal and spatial phasing for concentrations of carbon monoxide, ozone and nitrogen oxides can be adequately represented by the models. Sensitivity studies indicate that initial and horizontal boundary conditions as well as grid size and subgrid-scale effects, while very significant in predicting air quality on the local scale, are less important in dealing with regional concentrations of pollutants than are emissions, meteorological conditions and vertical boundary conditions

  4. Characterization of large area photomultipliers and its application to dark matter search with noble liquid detectors

    CERN Document Server

    Bueno, A; Melgarejo, A J; Muñoz, F J; Navarro, J L; Navas, S; Ruiz, A G

    2008-01-01

    There is growing interest in the use of noble liquid detectors to study particle properties and search for new phenomena. In particular, they are extremely suitable for performing direct searches for dark matter. In this kind of experiments, the light produced after an interaction within the sensitive volume is usually read-out by photomultipliers. The need to go to masses in the tonne scale to explore deeper regions of the parameter space, calls for the use of large area photomultipliers. In this paper we address the need to perform laboratory calibration measurements of these large photomultipliers, in particular to characterize its behaviour at cryogenic temperatures where no reference from the manufacturer is available. We present comparative tests of phototubes from two companies. The tests are performed in conditions similar to those of operation in a real experiment. Measurements of the most relevant phototube parameters (quantum efficiency, gain, linearity, etc.) both at room and liquid Argon temperat...

  5. Modeling geomorphic changes in sedimentary rock areas. A case study in the Boso Peninsula area, Central Japan

    International Nuclear Information System (INIS)

    For the long-term safety of geological disposal of high-level radioactive wastes, evaluation of the radionuclide migration toward the human environment associated with groundwater flow is an issue of utmost importance. Therefore, we are carrying out a program for developing methods for assessing long-term groundwater flow in regional scales. As a part of the above program, we constructed models depicting the influences of geomorphological evolution on long-term groundwater flow. This was done by reconstructing the processes of river deepening with historical simulation of the profiles of four rivers in the Boso Peninsula. This area was selected because the sedimentary rocks are widely distributed with uncomplicated topography and geological structure which enabled the acquisition of a large amount of relevant geological information. The study resulted in the sum of erosion during the past 125,000 years which is the equivalent of one glacial to interglacial cycle. Consequently, the profiles of four rivers during the last glacial age to the present were successfully reconstructed using similar parameters. Also it was found that, in this area, the profiles were sculpted in accordance with the uplifting rates with very little influence of initial topography owing to the relatively soft and easily dissected characteristics of the geological units. However, detailed investigation revealed that the effects of geomorphological evolution differ between the rivers emptying into the inner bay and the rivers emptying into the open sea. In the case of the former two rivers, the river-bed elevation hardly changed during the 125,000 years and shows an extensive concave profile including the marine area. In the latter case, the elevation changed within the range of 20-30 m during the period and a convex profile appears in the marine area where the present water depth is over 30 m. Additionally the estimates of total amount of erosion during 125,000 years in the former group were

  6. Simulating stream flow over data sparse areas – an application of internet based data

    Directory of Open Access Journals (Sweden)

    M. T. Vu

    2011-12-01

    Full Text Available Many hydrological modeling studies suffer from lack of robust station observed data, mainly rainfall and discharge. Where such a dearth of data exists, detailed modeling studies in estimating and assessing change in water resources become difficult when models cannot be compared against recorded observations. In addition, some river basins exist along trans-boundaries of two or more countries that problems in data sharing among them add to the difficulties in such modeling studies. Nevertheless, with the advancement in the global internet resources, access to such data has become easy. Whether such internet based data are good substitutes for station data can be ascertained only after performing some modeling research. To this end, this paper describes a hydrological modeling study that simulates the river flow of the Da River across the trans-boundary regions of China and Vietnam over a 11 yr period from 1971 to 1982. Globally available observation data used in this study include topography (from SRTM – Shuttle Radar Topography Mission, land use (from GLCC – Global Land Cover Characterization, soil (from FAO – Food and Agriculture Organization, precipitation (from APHRODITE – Asian Precipitation Highly Resolved Observational Data Integration Towards the Evaluation and temperature (from GHCN2 – modified of Global Historical Climatology Network version 2. The study employs a hydrological model to recreate the natural flow without dam(s built across the main river channel. The results of the study are promising and provide a wide scope to utilize internet based data for further research. This also has implications in the context of climate change applications.

  7. Simulating stream flow over data sparse areas - an application of internet based data

    Science.gov (United States)

    Vu, M. T.; Raghavan, S. V.; Liong, S. Y.

    2011-12-01

    Many hydrological modeling studies suffer from lack of robust station observed data, mainly rainfall and discharge. Where such a dearth of data exists, detailed modeling studies in estimating and assessing change in water resources become difficult when models cannot be compared against recorded observations. In addition, some river basins exist along trans-boundaries of two or more countries that problems in data sharing among them add to the difficulties in such modeling studies. Nevertheless, with the advancement in the global internet resources, access to such data has become easy. Whether such internet based data are good substitutes for station data can be ascertained only after performing some modeling research. To this end, this paper describes a hydrological modeling study that simulates the river flow of the Da River across the trans-boundary regions of China and Vietnam over a 11 yr period from 1971 to 1982. Globally available observation data used in this study include topography (from SRTM - Shuttle Radar Topography Mission), land use (from GLCC - Global Land Cover Characterization), soil (from FAO - Food and Agriculture Organization), precipitation (from APHRODITE - Asian Precipitation Highly Resolved Observational Data Integration Towards the Evaluation) and temperature (from GHCN2 - modified of Global Historical Climatology Network version 2). The study employs a hydrological model to recreate the natural flow without dam(s) built across the main river channel. The results of the study are promising and provide a wide scope to utilize internet based data for further research. This also has implications in the context of climate change applications.

  8. Study renewable energy - sugarcane ethanol. Traditional areas. Final report; Estudo energias renovaveis - etanol de cana. Areas tradicionais. Relatorio final

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This report presents the mapping of areas with potential for ethanol production in traditional areas of the Brazil. In the traditional areas, with clear emphasis in the Northeast region of Brazil, was selected ten areas in the states of Bahia, Sergipe, Alagoas, Pernambuco, Paraiba, Rio Grande do Norte and Ceara. In the Southeast region two areas, between the Norte Fluminense, Southern of the Espirito Santo and eastern of the Minas Gerais.

  9. An Evolutionary Study of Rich Mobile Applications

    OpenAIRE

    Abolfazli, Saeid; Sanaei, Zohre; Shiraz, Muhammad; Keshavarz, Hassan; Gani, Abdullah

    2012-01-01

    Delivering Rich User eXperience (RUX) with the current explosion of smartphone as real ubiquitous computing device requires adaptive application architecture. Rich Mobile Application (RMA) is likely the candidate architecture for future mobile applications to deliver rich, immersive experience to the smartphone users. Research and development in domain of RMA has started and results are appearing in literature which advocates its future trend and encourages review of RMAs. This article aims t...

  10. Adaptive Real Time Data Mining Methodology for Wireless Body Area Network Based Healthcare Applications

    Directory of Open Access Journals (Sweden)

    Dipti Durgesh Patil

    2012-08-01

    Full Text Available Since the population is growing, the need for high quality and efficient healthcare, both at home and in hospital, is becoming more important. This paper presents the innovative wireless sensor network basedMobile Real-time Health care Monitoring (WMRHM framework which has the capacity of giving health predictions online based on continuously monitored real time vital body signals. Developments in sensors, miniaturization of low-power microelectronics, and wireless networks are becoming a significant opportunity for improving the quality of health care services. Physiological signals like ECG, EEG, SpO2, BP etc. can be monitor through wireless sensor networks and analyzed with the help of data mining techniques. These real-time signals are continuous in nature and abruptly changing hence there is a need to apply an efficient and concept adapting real-time data stream mining techniques for taking intelligent health care decisions online. Because of the high speed and huge volume data set in data streams, the traditional classification technologies are no longer applicable. The most important criteria are to solve the real-time data streams mining problem with ‘concept drift’ efficiently. This paper presents the state-of-the art in this field with growing vitality and introduces the methods for detecting concept drift in data stream, then gives a significant summary of existing approaches to the problem of concept drift. The work is focused on applying these real time stream mining algorithms on vital signals of human body in Wireless Body Area Network( WBAN based health care environment.

  11. The Land Use Change in the Scenic Area: A Case Study of Huangguoshu

    Institute of Scientific and Technical Information of China (English)

    Xiaozhu; CHEN

    2015-01-01

    Based on information entropy theory and ecological footprint theory,we analyze the changes in land use and land ecological carrying capacity in Huangguoshu scenic area during 2009- 2012. The results show that the area of arable land and construction land was relatively increased while the area of grassland and woodland was relatively reduced in Huangguoshu scenic area during 2009- 2012,and the information entropy showed a wavy change. It indicates that the land use in the study area poses increasing pressure on the ecological environment,and there is a need to strengthen ecological protection and achieve the coordinated development of land use and ecological environment construction.

  12. Study on Eco-climate Type Regionalization of Wheat Growing Areas in Yunnan Province

    Institute of Scientific and Technical Information of China (English)

    Yongxin; LU; Limin; CAO; Zhongping; ZHANG; Hongbo; LI

    2013-01-01

    In order to provide an objective and scientific theoretical basis for rational distribution of wheat growth in Yunnan Province,according to the relationship between Yunnan weather conditions and wheat growth adaptability,a study on eco-climate type regionalization of wheat growing areas in Yunnan was conducted using principal component analysis and GIS technology. The results show that Yunnan Province could be divided into four types,namely southern warm and humid wheat growing area,central semi-arid wheat growing area,central semi-humid wheat growing area and north-central cold wheat growing area.

  13. Mineral resources of Cactus Plain and East Cactus Plain Wilderness Study Areas, La Paz County, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Tosdal, R.M.; Eppinger, R.G.; Erdman, J.A.; Hanna, W.F.; Pitkin, J.A.; Blank, H.R. Jr.; O' Leary, R.M.; Watterson, J.R. (US Geological Survey (US)); Kreidler, T.J. (US Bureau of Mines (US))

    1990-01-01

    This paper reports on geologic, geochemical, and geophysical studies in the Cactus Plain and East Cactus Plain Wilderness Study Areas outlined in areas with moderate to high potential for gold, silver, copper, lead, zinc, barite, fluorite, manganese, and sand suitable for foundry, fracturing, and abrasive uses and low resource potential for beryllium, uranium and bentonitic clays.

  14. Mineral resources of Cactus Plain and East Cactus Plain Wilderness Study Areas, La Paz County, Arizona

    International Nuclear Information System (INIS)

    This paper reports on geologic, geochemical, and geophysical studies in the Cactus Plain and East Cactus Plain Wilderness Study Areas outlined in areas with moderate to high potential for gold, silver, copper, lead, zinc, barite, fluorite, manganese, and sand suitable for foundry, fracturing, and abrasive uses and low resource potential for beryllium, uranium and bentonitic clays

  15. Applications of Ensemble-based Data Assimilation Techniques for Aquifer Characterization using Tracer Data at Hanford 300 Area

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xingyuan; Hammond, Glenn E.; Murray, Christopher J.; Rockhold, Mark L.; Vermeul, Vincent R.; Zachara, John M.

    2013-10-31

    Subsurface aquifer characterization often involves high parameter dimensionality and requires tremendous computational resources if employing a full Bayesian approach. Ensemble-based data assimilation techniques, including filtering and smoothing, are computationally efficient alternatives. Despite the increasing number of applications of ensemble-based methods in assimilating flow and transport related data for subsurface aquifer charaterization, most are limited to either synthetic studies or two-dimensional problems. In this study, we applied ensemble-based techniques for assimilating field tracer experimental data obtained from the Integrated Field Research Challenge (IFRC) site at the Hanford 300 Area. The forward problem was simulated using the massively-parallel three-dimensional flow and transport code PFLOTRAN to effectively deal with the highly transient flow boundary conditions at the site and to meet the computational demands of ensemble-based methods. This study demonstrates the effectiveness of ensemble-based methods for characterizing a heterogeneous aquifer by sequentially assimilating multiple types of data. The necessity of employing high performance computing is shown to enable increasingly mechanistic non-linear forward simulations to be performed within the data assimilation framework for a complex system with reasonable turnaround time.

  16. Base line study on demographic and health pattern around uranium mining area at Tummalapalle

    International Nuclear Information System (INIS)

    Aim of the study is to document baseline data on the socio-economic, demographic and health status of the study area with specific objective to generate household information on infrastructure, housing, agriculture, drinking water and sanitation facilities

  17. Feasibility study of EEW application in Korea

    Science.gov (United States)

    Chi, H.; Park, J.; Sheen, D.

    2008-12-01

    At present, it seems almost impossible to predict where and how much strong a earthquake will happen within very limited time such as two or three days before it occurs. However, the advantage of modern electronic techniques can support us very fast communication tools around nation-wide area so that we can receive P- waves arrival information from seismic stations through communication lines before S-waves strike our living site. This is the key of EEW(Earthquake Early Warning) concept that is under development around world especially including Japan, United State of America, and Taiwan. In this pilot study we proposed the direction for developing Korean Earthquake Early Warning System. Considering the state of the art techniques used in Japan, USA and Taiwan, ElarmS would be more adaptable to Korea since ElarmS can work from the low limit of moderate earthquakes around magnitude 3.5, which would annually happen in Korea. We investigate empirical magnitude scaling relationship for South Korea using 27 events ranging in magnitude from 2.2 to 4.9 recorded by the Korea Institute of Geoscience And Mineral Resources (KIGAM) and the Korea Meteorological Administration (KMA) for 2007. We measure the maximum predominant period and the peak displacement or velocity amplitude from the first 4 seconds of P wave arrivals to derive period-magnitude and amplitude-magnitude scaling relationship, respectively. For the period-magnitude relationship, we find that 10 Hz low-pass filter yields better estimate than 3 Hz. This is because the magnitudes of most events used in this study are too small (<3.0). It is also shown that peak displacement for velocity instruments and peak velocity for accelerometers have their own magnitude scaling relationships, respectively. Thus, for the amplitude-magnitude relationship, like the relationships in northern California, two individual amplitude scaling relationships would be necessary.

  18. Road and street smart lighting control systems as a new application area of the hot-potato protocol

    DEFF Research Database (Denmark)

    Kiedrowski, Piotr; Gutierrez Lopez, Jose Manuel; Boniewicz, Piotr; Perez de Prado, Rocio

    2014-01-01

    This paper presents the new application area of the hot-potato routing protocol, which is a “last-mile” communication network for controlling systems of road and street lighting. Four variants of the hot-potato protocol are analyzed with use of the graph theory. For the assessment of the traffic ...

  19. Artificial neural network applications in ionospheric studies

    Directory of Open Access Journals (Sweden)

    L. R. Cander

    1998-06-01

    Full Text Available The ionosphere of Earth exhibits considerable spatial changes and has large temporal variability of various timescales related to the mechanisms of creation, decay and transport of space ionospheric plasma. Many techniques for modelling electron density profiles through entire ionosphere have been developed in order to solve the "age-old problem" of ionospheric physics which has not yet been fully solved. A new way to address this problem is by applying artificial intelligence methodologies to current large amounts of solar-terrestrial and ionospheric data. It is the aim of this paper to show by the most recent examples that modern development of numerical models for ionospheric monthly median long-term prediction and daily hourly short-term forecasting may proceed successfully applying the artificial neural networks. The performance of these techniques is illustrated with different artificial neural networks developed to model and predict the temporal and spatial variations of ionospheric critical frequency, f0F2 and Total Electron Content (TEC. Comparisons between results obtained by the proposed approaches and measured f0F2 and TEC data provide prospects for future applications of the artificial neural networks in ionospheric studies.

  20. Transpirative Deficit Index (TDI) for the management of water scarcity in irrigated areas: development and application in northern Italy

    Science.gov (United States)

    Borghi, Anna; Facchi, Arianna; Rienzner, Michele; Gandolfi, Claudio

    2016-04-01

    In Europe, the monitoring and assessment of drought is entrusted to the European Drought Observatory (EDO). EDO indicators are calculated considering rainfed agriculture and delivered on a 5 km grid. However, in southern Europe, irrigation may compensate for potentially severe agricultural droughts and specific water scarcity indicators that explicitly consider irrigation are needed. In the Po River Plain, irrigated crops cover more than 70% of the agricultural land, massive amounts of water are diverted from rivers for irrigation, and surface irrigation methods are largely applied. Nowadays, the region is not a water scarce basin, but irrigation water shortages have occurred with increased frequency during the last two decades. Moreover, a recent EU report shows that the Po River Plain is included among areas in Europe that by 2030 shall be affected by water scarcity. In this context, a study was started to select and develop indicators for the management and prevention of Water Scarcity and Drought (WS&D) based on the synergic use of hydrological modelling and Earth Observation data applied at a spatial scale of interest for end-users (250m grid). These indicators shall be better suited for the assessment of WS&D in Italy as well as in other southern European countries. This work presents the development and the application of the TDI (Transpirative Deficit Index) to a study area, within the Po River Plain. TDI is an agricultural drought index based on the transpiration deficit (TDx, calculated as the difference between potential and actual transpiration), computed by the spatially distributed hydrological model IDRAGRA and cumulated over a period of x days. TDx for each day of a specific year is compared to the long-term TDx probability distribution (e.g., over 20-30 years), which is transformed into a standardized normal distribution. The non-exceedance probability of TDx is finally expressed in terms of unit of standard deviation (TDI), following the approach

  1. 环保节能材料在内蒙古地区建筑设计中的应用研究%Study on the Application of Environmental Protection and Energy Saving Materials in the Architectural Design in Mongolia Area

    Institute of Scientific and Technical Information of China (English)

    阎日鑫

    2014-01-01

    随着我国经济和社会的迅猛发展,自然资源越发紧缺,环保节能已是一项十分迫切和重要的工作。环保节能材料在建筑设计中的应用十分重要。本文着重探讨了环保节能材料在内蒙古地区建筑设计中的应用情况。%With the rapid economic and social development of our country, natural resources have become scarce, so enviro-nmental protection and energy saving has become a very urg-ent and important work. The application of environmental pro-tection and energy saving materials in architectural design is very important. This paper discussed the application of enviro-nmental protection and energy saving materials in architectural design in Inner Mongolia area.

  2. A novel approach to statistical downscaling considering nonstationarities: application to daily precipitation in the Mediterranean area

    Science.gov (United States)

    Hertig, E.; Jacobeit, J.

    2013-01-01

    In the present study, nonstationarities in predictor-predictand relationships within the framework of statistical downscaling are investigated. In this context, a novel validation approach is introduced in which nonstationarities are explicitly taken into account. The method is based on results from running calibration periods. The (non)overlaps of the bootstrap confidence interval of the mean model performance (derived by averaging the performances of all calibration/verification periods) and the bootstrap confidence intervals of the individual model errors are used to identify (non)stationary model performance. The specified procedure is demonstrated for mean daily precipitation in the Mediterranean area using the bias to assess model skill. A combined circulation-based and transfer function-based approach is employed as a downscaling technique. In this context, large-scale seasonal atmospheric regimes, synoptic-scale daily circulation patterns, and their within-type characteristics, are related to daily station-based precipitation. Results show that nonstationarities are due to varying predictors-precipitation relationships of specific circulation configurations. In this regard, frequency changes of circulation patterns can damp or increase the effects of nonstationary relationships. Within the scope of assessing future precipitation changes under increased greenhouse warming conditions, the identification and analysis of nonstationarities in the predictors-precipitation relationships leads to a substantiated selection of specific statistical downscaling models for the future assessments. Using RCP4.5 scenario assumptions, strong increases of daily precipitation become apparent over large parts of the western and northern Mediterranean regions in winter. In spring, summer, and autumn, decreases of precipitation until the end of the 21st century clearly dominate over the entire Mediterranean area.

  3. Application of RAD-BCG calculator to Hanford's 300 area shoreline characterization dataset

    Energy Technology Data Exchange (ETDEWEB)

    Antonio, Ernest J.; Poston, Ted M.; Tiller, Brett L.; Patton, Gene W.

    2003-07-01

    Abstract. In 2001, a multi-agency study was conducted to characterize potential environmental effects from radiological and chemical contaminants on the near-shore environment of the Columbia River at the 300 Area of the U.S. Department of Energy’s Hanford Site. Historically, the 300 Area was the location of nuclear fuel fabrication and was the main location for research and development activities from the 1940s until the late 1980s. During past waste handling practices uranium, copper, and other heavy metals were routed to liquid waste streams and ponds near the Columbia River shoreline. The Washington State Department of Health and the Pacific Northwest National Laboratory’s Surface Environmental Surveillance Project sampled various environmental components including river water, riverbank spring water, sediment, fishes, crustaceans, bivalve mollusks, aquatic insects, riparian vegetation, small mammals, and terrestrial invertebrates for analyses of radiological and chemical constituents. The radiological analysis results for water and sediment were used as initial input into the RAD-BCG Calculator. The RAD-BCG Calculator, a computer program that uses an Excel® spreadsheet and Visual Basic® software, showed that maximum radionuclide concentrations measured in water and sediment were lower than the initial screening criteria for concentrations to produce dose rates at existing or proposed limits. Radionuclide concentrations measured in biota samples were used to calculate site-specific bioaccumulation coefficients (Biv) to test the utility of the RAD-BCG-Calculator’s site-specific screening phase. To further evaluate site-specific effects, the default Relative Biological Effect (RBE) for internal alpha particle emissions was reduced by half and the program’s kinetic/allometric calculation approach was initiated. The subsequent calculations showed the initial RAD-BCG Calculator results to be conservative, which is appropriate for screening purposes.

  4. Application of RAD-BCG calculator to Hanford's 300 area shoreline characterization dataset

    International Nuclear Information System (INIS)

    In 2001, a multi-agency study was conducted to characterize potential environmental effects from radiological and chemical contaminants on the near-shore environment of the Columbia River at the 300 Area of the U.S. Department of Energy's Hanford Site. Historically, the 300 Area was the location of nuclear fuel fabrication and was the main location for research and development activities from the 1940s until the late 1980s. During past waste handling practices uranium, copper, and other heavy metals were routed to liquid waste streams and ponds near the Columbia River shoreline. The Washington State Department of Health and the Pacific Northwest National Laboratory's Surface Environmental Surveillance Project sampled various environmental components including river water, riverbank spring water, sediment, fishes, crustaceans, bivalve mollusks, aquatic insects, riparian vegetation, small mammals, and terrestrial invertebrates for analyses of radiological and chemical constituents. The radiological analysis results for water and sediment were used as initial input into the RAD-BCG Calculator. The RAD-BCG Calculator, a computer program that uses an Excel(regsign) spreadsheet and Visual Basic(regsign) software, showed that maximum radionuclide concentrations measured in water and sediment were lower than the initial screening criteria for concentrations to produce dose rates at existing or proposed limits. Radionuclide concentrations measured in biota samples were used to calculate site-specific bioaccumulation coefficients (Biv) to test the utility of the RAD-BCG-Calculator's site-specific screening phase. To further evaluate site-specific effects, the default Relative Biological Effect (RBE) for internal alpha particle emissions was reduced by half and the program's kinetic/allometric calculation approach was initiated. The subsequent calculations showed the initial RAD-BCG Calculator results to be conservative, which is appropriate for screening purposes.

  5. Molecular dynamics study of contact mechanics: contact area and interfacial separation from small to full contact

    OpenAIRE

    Yang, C; Persson, B. N. J.

    2007-01-01

    We report a molecular dynamics study of the contact between a rigid solid with a randomly rough surface and an elastic block with a flat surface. We study the contact area and the interfacial separation from small contact (low load) to full contact (high load). For small load the contact area varies linearly with the load and the interfacial separation depends logarithmically on the load. For high load the contact area approaches to the nominal contact area (i.e., complete contact), and the i...

  6. Effects of weld residual stresses on crack-opening area analysis of pipes for LBB applications

    International Nuclear Information System (INIS)

    This paper summarizes four different studies undertaken to evaluate the effects of weld residual stresses on the crack-opening behavior of a circumferential through-wall crack in the center of a girth weld. The effect of weld residual stress on the crack-opening-area and leak-rate analyses of a pipe is not well understood. There are no simple analyses to account for these effects, and, therefore, they are frequently neglected. The four studies involved the following efforts: (1) Full-field thermoplastic finite element residual stress analyses of a crack in the center of a girth weld, (2) A comparison of the crack-opening displacements from a full-field thermoplastic residual stress analysis with a crack-face pressure elastic stress analysis to determine the residual stress effects on the crack-opening displacement, (3) The effects of hydrostatic testing on the residual stresses and the resulting crack-opening displacement, and (4) The effect of residual stresses on crack-opening displacement with different normal operating stresses

  7. Effects of weld residual stresses on crack-opening area analysis of pipes for LBB applications

    Energy Technology Data Exchange (ETDEWEB)

    Dong, P.; Rahman, S.; Wilkowski, G. [and others

    1997-04-01

    This paper summarizes four different studies undertaken to evaluate the effects of weld residual stresses on the crack-opening behavior of a circumferential through-wall crack in the center of a girth weld. The effect of weld residual stress on the crack-opening-area and leak-rate analyses of a pipe is not well understood. There are no simple analyses to account for these effects, and, therefore, they are frequently neglected. The four studies involved the following efforts: (1) Full-field thermoplastic finite element residual stress analyses of a crack in the center of a girth weld, (2) A comparison of the crack-opening displacements from a full-field thermoplastic residual stress analysis with a crack-face pressure elastic stress analysis to determine the residual stress effects on the crack-opening displacement, (3) The effects of hydrostatic testing on the residual stresses and the resulting crack-opening displacement, and (4) The effect of residual stresses on crack-opening displacement with different normal operating stresses.

  8. STUDIES TO SUPPORT DEPLOYMENT OF EDIBLE OILS AS THE FINAL CVOC REMEDIATION IN T AREA SUMMARY REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Riha, B; Brian02 Looney, B; Miles Denham, M; Christopher Bagwell, C; Richard Hall, R; Carol Eddy-Dilek, C

    2006-10-31

    The purpose of these studies was to determine the feasibility of using edible oils for remediation of the low but persistent chlorinated solvent (cVOC) groundwater contamination at the SRS T-Area. The following studies were completed: (1) Review of cVOC degradation processes and edible oil delivery for enhanced bioremediation. (2) Column studies to investigate placing neat oil on top of the water table to increase oil saturation and sequestration. (3) Analysis of T-Area groundwater geochemistry to determine the applicability of edible oils for remediation at this site. (4) Microcosm studies to evaluate biotic and abiotic processes for the T-Area groundwater system and evaluation of the existing microbial community with and with out soybean oil amendments. (5) Monitoring of a surrogate vadose zone site undergoing edible oil remediation at the SRS to understand partitioning and biotransformation products of the soybean oil. (6) Design of a delivery system for neat and emulsified edible oil deployment for the T-Area groundwater plume. A corresponding white paper is available for each of the studies listed. This paper provides a summary and overview of the studies completed for the remediation of the T-Area groundwater plume using edible oils. This report begins with a summary of the results and a brief description of the preliminary oil deployment design followed by brief descriptions of T-Area and current groundwater conditions as related to edible oil deployment. This is followed by a review of the remediation processes using edible oils and specific results from modeling, field and laboratory studies. Finally, a description of the preliminary design for full scale oil deployment is presented.

  9. Application of 2H and 18O in hydrological studies

    International Nuclear Information System (INIS)

    Due to isotope fractionation effects there exist typical variations in isotope content in the hydrological cycle. The greatest changes in isotope concentration occur in precipitation and can be described in terms of global and local effects. In surface waters the fluctuations in isotope content can be used for many hydrological investigations such as river mixing and lake studies. The isotope effects in the formation of precipitation also enable conclusions about the residence time and the origin of groundwater i.e. its catchment area, and about the climatic conditions prevailing at the time of groundwater recharge. In two expamples the interrelations between precipitation and surface or groundwater as well as between surface water and groundwater show the application of isotope techniques. (orig.)

  10. Understanding Pharmaceutical Sustainable Supply chains - A Case Study Application

    Directory of Open Access Journals (Sweden)

    Ana Margarida Santos Bravo

    2013-06-01

    Full Text Available A major paradigmchange is occurring in the pharmaceutical industry and an increase of returnsand recalls has been seen; although this industry in known for the continuoussearch for quality and regulatory compliance.Hence, in this paperwe combine the findings of previous literature reviews conducted by theauthors. Essentially, explore the links between pharmaceutical drugs quality,reverse logistics, and sustainability. A case study on a global corporationmanufacturing in the area of generic drug products has been selected andcorrelations are done with regards to returns and recalls from hospitalpharmacies, in particular. With this approach it is expected to link bothparties in the application of a quality by design risk management approach aswell as reduce variability and risk of noncompliance.

  11. Application of subinterval area median contrast filtering method in the recognizing of geochemical anomalies

    International Nuclear Information System (INIS)

    Traditional geochemical processing method sometimes maybe loses some weak anomalies related to mineralization, the authors can avoid the influence of geology background and can solve the problem of recognizing weak anomalies in the low-background and high-background area with the subinterval area median contrast filtering method. In an area of Jiangxi Province, several new anomalies are identified by this method and uranium mineralized prospects are found among them. (authors)

  12. The applicability of a helicopter patrol procedure to diverse areas: A cost-benefit evaluation

    OpenAIRE

    Kirchner, Robert E.; Schnelle, John F.; Domash, Michele; Larson, Lynn; Carr, Adam; McNees, M. Patrick

    1980-01-01

    The residential burglary deterrent effects of a helicopter patrol procedure were investigated in four separate areas with a multiple baseline technology. The helicopter was flown during an 8:00 a.m. to 4:00 p.m. period in two high density population areas of approximately 9.82 and 14.71 square miles and two low density population areas of 117.49 and 89.97 square miles. The helicopter patrol reduced residential burglaries without crime displacement in the two high density areas but had no dete...

  13. A review of the economic implications of the National Academy of Engineering 1974 study of the potential application of space systems

    Science.gov (United States)

    1975-01-01

    User benefits resulting from the application of space systems to previously described application areas were identified, and methods to assign priorities to application areas and to quantify the benefits were described. The following areas were selected for in-depth review: communications, materials processing in space, weather and climate, and institutional arrangements for space applications. Recommendations concerning studies that should be undertaken to develop a more precise understanding of the source and magnitude of the realizable economic benefits were also presented.

  14. Using Ecological Propensity Score to Adjust for Missing Confounders in Small Area Studies

    OpenAIRE

    Wang, Yingbo; Richardson, Sylvia; Hansell, Anna; Blangiardo, Marta

    2016-01-01

    Small area ecological studies are commonly used in epidemiology to assess the impact of area level risk factors on health outcomes when data are only available in an aggregated form. However the estimates are often biased due to unmeasured confounders which cannot be account for. Extra confounding information can be provided through external datasets like surveys / cohorts, where the data are available at the individual level rather than at the area level; however they typically lack the geog...

  15. Hydrogeochemical and spectroscopic studies of radioactive materials in Ayrakan and Cheshmeh Shotori areas, northeastern Isfahan province

    OpenAIRE

    Mostafa Esmaeili Vardanjani; Reza Shamsipour Dehkordi; Kaveh Pazand; Davoud Rahi

    2011-01-01

    Groundwaters hydrochemistry of Ayrakan and Cheshmeh Shotori areas and geochemistry of rare earth elements, indicate Ayrakan alkali granite as the origin of uranium and other dissolved elements in groundwaters of these areas. Geochemical and hydrogeochemical studies as well as the trend of uranium and thorium transition and mobility in aqueous environments of these areas indicate uranium adsorption by iron hydroxide (goethite) as the deterrent agent against uranium transition and mobility from...

  16. Carbon savings resulting from the cooling effect of green areas: A case study in Beijing

    International Nuclear Information System (INIS)

    Green areas cool the climate of a city, reduce the energy consumption caused by the urban heat island (UHI) effect, and bring along carbon savings. However, the calculation of carbon savings due to the cooling effect of green areas is still not well understood. We have used a Landsat Enhanced Thematic Mapper Plus (ETM+) image of Beijing, to identify the cooled areas, compute the possible energy used to maintain the temperature differences between cooled areas and their surrounding heated areas, and calculate the carbon savings owing to the avoidance of energy use. Results show that a total amount of 14315.37 tons carbon savings was achieved in the study area and the amount was related to the biomass, the size and the shape of green areas. These results demonstrate the importance of carbon savings resulting from green areas' cooling effect. - Highlights: → We provide an integral equation for the calculation of energy conservation and carbon savings. → We show that carbon savings is partly influenced by green areas' features. → A strong correlation between biomass, size and shape of green areas and carbon savings. - An integral equation for the calculation of energy conservation and carbon savings; Showing that carbon savings is partly influenced by green areas' features.

  17. State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams

    International Nuclear Information System (INIS)

    This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment

  18. State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment.

  19. Numerical simulations of crack opening areas for leak before break applications in LMR (Liquid Metal Reactors) components

    International Nuclear Information System (INIS)

    The application of the Leak Before Break (LBB) concept to Liquid Metal Reactor (LMR) components is sometimes delicate due to the low level of primary loads (pressure, gravity) compared to thermal gradients. This is unfavorable for the flow rate. When applying procedures based on simplified analytical methods, the calculated flow rate for a critical through-wall defect is often very low and the conclusion is that the component does not verify the LBB concept. FRAMATOME-NOVATOME has undertaken several studies in order to take into account more accurately the effects of blending stresses due to an axial thermal gradient and residual welding stresses in the evaluation of the leak are for a through-wall circumferential defect in a cylindrical structure, typical of LMR's vessel. The main results issued from three-dimensional finite element calculations are the following: for a welding process giving tension on the skins of the vessel and compression in the inner part, the effect of residual stresses on the leak are is negligible; for a long defect, the leak area given by simplified analytical methods is pessimistic. All these results allow the verification of the LBB concept for the studied case. They will contribute to the development of LBB methodology for LMR components. (author). 5 refs., 4 figs

  20. Application of 85Kr dating to groundwater in volcanic aquifer of Kumamoto Area, Japan

    International Nuclear Information System (INIS)

    Groundwater age was determined by 85Kr/Kr specific activity of gases dissolved in groundwater at Kumamoto Area, in which newly developed Kr extraction system and liquid scintillation counting technique for 85Kr were applied. Apparent mean residence times observed were 8.2 ± 0.7 years and 20.7 ± 0.6 years for the groundwater taken from a well at the recharge area and that from an artesian borehole at the discharge area, respectively showing a consistent age trend estimated from the observed groundwater flow system of Kumamoto Area and also that determined using environmental tritium. Similar mean residence times of 85Kr and tritium were observed at the discharge area but the mean residence time of 85Kr at the recharge area was younger compared to that of tritium, probably due to mixing of river water containing recent 85Kr high in concentration into groundwater flow coming from the northern upland's recharge area. The mean residence time of the groundwater flow coming from northern upland area and a traveling time of the groundwater between two sampling points were estimated by a simple model assuming mixing the river water with the groundwater and a piston flow between two sampling points. (author)

  1. Application of High-Resolution Seismic Technique in the Survey Area of Daqing

    Institute of Scientific and Technical Information of China (English)

    Chen Daohong; Li Qinxue

    1996-01-01

    @@ During the Seventh Five-Year Plan ,the high-resolution seismic technique had made a great advances in the survey area of Daqing. In a depth of less than 3000 meters, the dominant frequency of seismic reflections reached 40 Hz, and the frequency bandwidth approximated 10 - 80 Hz. Later on, we applied the technique to six regions in Daqing survey area.

  2. Local People and Protected Areas : A case study from Miraflor, Nicaragua

    OpenAIRE

    Saalismaa, Nina

    2000-01-01

    The study analyses the needs and expectations of different people and different interest groups affected by conservation schemes, and examines the possibilities of taking the local opinions into account in the management of protected areas. Theoretically, the study relies on those approaches that aim to link the issues of nature protection with the questions of social sustainability and the livelihood requirements of local people. The study explains how the concept of protected areas has ...

  3. Application of agrometeorological spectral model in rice area in southern Brazil

    Science.gov (United States)

    Leivas, Janice F.; de C. Teixeira, Antonio Heriberto; Andrade, Ricardo G.; de C. Victoria, Daniel; Bayma-Silva, Gustavo; Bolfe, Edson L.

    2015-10-01

    The southern region is responsible for 70% of rice production in Brazil. In this study, rice areas of Rio Grande do Sul were selected, using the land use classification, scale 1: 100,000, provided by Brazilian Institute of Geography and Statistics (IBGE). MODIS Images were used and meteorological data, available by National Institute of Meteorology (INMET). The period of analysis was crop season 2011/2012, October to March. To obtain evapotranspiration was applied agrometeorological-spectral model SAFER (Simple Algorithm For Retrieving Evapotranspiration). From the analysis of the results, on planting and cultivation period , the average evapotranspiration (ET) daily was 1.93 +/- 0.96 mm.day-1. In the vegetative development period of rice, the daily ET has achieved 4.94 mm.day-1, with average value 2,31+/- 0.97 mm.day-1. In the period of harvest, evapotranspiration daily average was 1.84 +/- 0.80 mm.day-1. From results obtained, the estimation of evapotranspiration from satellite images may assist in monitoring the culture during the cycle, assisting in estimates of water productivity and crop yield.

  4. Application of large area silicon-silicon-plastic detectors for heavy-ion detection

    International Nuclear Information System (INIS)

    To study binary and multibody breakup reactions at intermediate energies (20-100 MeV/u), a 48 element multiplicity array has been designed for reverse kinematic reactions. In reverse kinematics the reaction products are emitted at about beam energy and are focused into a forward cone in the laboratory frame. Each telescope is composed of a 300μm Si, a 5mm Si(Li) and a 7.6cm plastic detector. The geometry of the array is a 7 x 7 wall placed in front of the beam, omitting the center position, which can arc in one dimension. To detect multibody events in the array with good efficiency, the telescopes are designed for close packing and with a 64% active area. These three stage telescopes will be able to detect particles with energies from 1-150 MeV/u, and identify fragments with Z = 2-60 and E/A = 10-100 MeV/u using the ΔE-E technique

  5. Functional MRI in human motor control studies and clinical applications

    International Nuclear Information System (INIS)

    Functional magnetic resonance imaging (fMRI) has been a useful tool for the noninvasive mapping of brain function associated with various motor and cognitive tasks. Because fMRI is based on the blood oxygenation level dependent (BOLD) effect, it does not directly record neural activity. With the fMRI technique, distinguishing BOLD signals creased by cortical projection neurons from those created by intracortical neurons appears to be difficult. Two major experimental designs are used in fMRI studies: block designs and event-related designs. Block-designed fMRI presupposes the steady state of regional cerebral blood flow and has been applied to examinations of brain activation caused by tasks requiring sustained or repetitive movements. By contrast, the more recently developed event-related fMRI with time resolution of a few seconds allows the mapping of brain activation associated with a single movement according to the transient aspects of the hemodynamic response. Increasing evidence suggests that multiple motor areas are engaged in a networked manner to execute various motor acts. In order to understand functional brain maps, it is important that one understands sequential and parallel organizations of anatomical connections between multiple motor areas. In fMRI studies of complex motor tasks, elementary parameters such as movement length, force, velocity, acceleration and frequency should be controlled, because inconsistency in those parameters may alter the extent and intensity of motor cortical activation, confounding interpretation of the findings obtained. In addition to initiation of movements, termination of movements plays an important role in the successful achievement of complex movements. Brain areas exclusively related to the termination of movements have been, for the first time, uncovered with an event-related fMRI technique. We propose the application of fMRI to the elucidation of the pathophysiology of movement disorders, particularly dystonia

  6. Application of multilayer perceptron for prediction of radionuclide migration from catchment area to watercourse

    International Nuclear Information System (INIS)

    In the thesis the results of verification of multilayer perceptron (MLP) {20–41–1} application with sigmoid activation function for prediction of lateral radionuclide migration are presented. The calculated values of Cs 137 and Sr 90 volumetric activity are close to experimental measurement limits, indicating the possibility of MLP application for the solving problem. (authors)

  7. Knowledge Worker Perceptions of Telework Policy in the New York Metropolitan Area: A Qualitative Descriptive Study

    Science.gov (United States)

    Slaughter, Sandra Lorraine Hawks

    2013-01-01

    This qualitative descriptive case study, "Knowledge Worker Perceptions of Telework in the New York Metropolitan Area," was conducted to explore the perceptions of knowledge workers who commute to a physical workplace in the New York Metropolitan area (NYMA). In-depth interviews were conducted with fourteen NYMA commuters who are…

  8. Significance of epidemiological and cytogenetic studies on high background radiation area residents

    International Nuclear Information System (INIS)

    Some area in the world are known as background levels of radiation are 3-5 times higher than the world average. The studies in high background area (HBRA) residents provide important direct information on the biological and health effects of chronic low dose rate radiation. (author)

  9. LANDSLIDES INCIDENCE IN THE PIEDMONT OF BAIA MARE URBAN AREA (CASE STUDIES

    Directory of Open Access Journals (Sweden)

    S. ZAHARIA

    2012-12-01

    Full Text Available The landslides incidence in the piedmont of baia mare urbana area cae studies. The General Urban Plan (GUP of Baia Mare municipality requires the study of expected susceptibility for landslides in order to build infrastructure within sustainable development conditions. The complexity and diversity of local geographic area factors, strongly affected by the human pressure, favours the triggering and extension of slope processes in the municipality’s piedmont area. To prevent some major imbalances it is imperative to implement some adequate measures based on in-depth studies.

  10. Methodological application so as to obtain digital elevation models DEM in wetland areas

    International Nuclear Information System (INIS)

    In order to understand hydrological systems and the description of flow processes that occur among its components it is essential to have a physiographic description that morphometric and relief characteristics. When local studies are performed, the basic cartography available, in the best case 1:25,000 scale, tends not to obey the needs required to represent the water dynamics that characterize the interactions between streams, aquifers and lenticular water bodies in flat zones particularly in those where there are wetlands localized in ancient F100D plains of rivers. A lack of financial resources is the principal obstacle to acquiring; information that is current and sufficient for the scale of the project. Geomorphologic conditions of flat relief zones are a good alternative for the construction of the new data. Using the basic cartography available and the new data, it is possible to obtain DEMs that are improved and consistent with the dynamics of surface and groundwater flows in the hydrological system. To accomplish this one must use spatial modeling tools coupled with Geographic Information System - GIS. This article present a methodological application for the region surrounding the catchment of wetland Cienaga Colombia in the Bajo Cauca region of Antioquia.

  11. Synaptic plasticity in area CA1 of rat hippocampal slices following intraventricular application of albumin.

    Science.gov (United States)

    Salar, Seda; Lapilover, Ezequiel; Müller, Julia; Hollnagel, Jan-Oliver; Lippmann, Kristina; Friedman, Alon; Heinemann, Uwe

    2016-07-01

    Epileptogenesis following insults to the brain may be triggered by a dysfunctional blood-brain barrier (BBB) associated with albumin extravasation and activation of astrocytes. Using ex vivo recordings from the BBB-disrupted hippocampus after neocortical photothrombotic stroke, we previously demonstrated abnormal activity-dependent accumulation of extracellular potassium with facilitated generation of seizure like events and spreading depolarizations. Similar changes could be observed after intracerebroventricular (icv) application of albumin. We hypothesized that alterations in extracellular potassium and glutamate homeostasis might lead to alterations in synaptic interactions. We therefore assessed the effects of icv albumin on homo- and heterosynaptic plasticity in hippocampal CA1, 24h after a single injection or 7days after continuous infusion of icv albumin. We demonstrate alterations in both homo- and heterosynaptic plasticity compared to control conditions in ex vivo slice studies. Albumin-treated tissue reveals (1) reduced long-term depression following low-frequency stimulation; (2) increased long-term potentiation of population spikes in response to 20Hz stimulation; (3) potentiated responses to Schaffer collateral stimulation following high-frequency stimulation of the direct cortical input and low-frequency stimulation of alveus and finally, (4) TGFβ receptor II (TGFβR-II) involvement in albumin-induced homosynaptic plasticity changes. We conclude that albumin-induced network hyperexcitability is associated with abnormal homo- and heterosynaptic plasticity that could partly be reversed by interference with TGFβR-II-mediated signaling and therefore it might be an important factor in the process of epileptogenesis. PMID:26972679

  12. The enzymatic histochemistry study in diaschisis area after focal cerebral ischemia

    International Nuclear Information System (INIS)

    Objective: To study the changes in activities of acetylcholine esterase (AChE), acid phosphatase (ACP) and succinic dehydrogenase (SDH) in diaschisis area after focal cerebral ischemia. Methods: The activities of AChE, ACP and SDH in diaschisis areas which were defined by cerebral blood flow autoradiography in a rat model of right middle cerebral artery occlusion (MCAO) were observed using enzymatic histochemistry. Results: With focal cerebral ischemia, there were no changes in AChE and ACP activities in the diaschisis areas, but SDH activity decreased. Conclusion: In the diaschisis areas the function of cholinergic system and lysosome was not affected, but metabolic activity of mitochondria decreased

  13. Effects of Land Use Change on Carbon Emission: A Case Study of Yuheng Mining Area

    OpenAIRE

    WU, Yarui; XIA, Wenhai

    2014-01-01

    Land use is the main factor affecting the carbon emission. Taking Yuheng Mining Area as the research object, this paper chose two periods of remote sensing data of 1999 and 2006, and adopted the remote sensing image interpretation and supervised classification to study the changes in land use types and carbon sink in different periods in the mining area. The results showed that the area of arable land was reduced from 166.96 km2 to 81.10 km2, the area of woodland was increased from 46.79 km2 ...

  14. Study on environmental etiology of high incidence areas of liver cancer in China

    Institute of Scientific and Technical Information of China (English)

    Nian-Feng Lin; Jie Tang; Hoteyi S. Mohamed Ismael

    2000-01-01

    China is a country with a high incidence of liver cancer in some areas[1]. Liver cancer has a wide distribution and threatens human health seriously. A rough estimation shows that out of a population of 1.2 × 108 in liver cancer areas patients are more than 1.0 × 105. The environment of the liver cancer area is very complicated and has different characteristics in different regions. But the epidemic regularity of liver cancer is obvious, and the environment in the cancer areas has also distinct characteristics that contribute to the study on the environmental etiology of liver cancer[2-5].

  15. Life Cycle Assessment of waste management systems in Italian industrial areas: Case study of 1st Macrolotto of Prato

    International Nuclear Information System (INIS)

    Life Cycle Assessment (LCA) is not widely used as a decision-supporting tool in Italy, despite recent European Commission policies fostering its adoption to achieve an energy- and resource-efficient economy. In this paper, an LCA of waste management system of the 1st Macrolotto industrial area is presented. The aims of the study were to identify the environmental critical points of the system and to evaluate opportunities and problems in applying this methodology at industrial area level. After a description of the waste management system of the 1st Macrolotto industrial area, the main assumptions of the study and some elements of the system modelling are presented. Results confirmed that door-to-door separated collection and packaging recycling are successful strategies for reducing the use of natural resources. The cooperation of the waste management company, which was part of the area management structure, was strategic for the completion of the analysis. Country-specific databases and models should be developed for a widespread application of the LCA methodology to waste management in Italian industrial areas.

  16. Evolution of traffic emissions in European urban areas: Milan case study

    International Nuclear Information System (INIS)

    The worldwide increasing role of mobile sources on the air quality of urban areas requires a careful evaluation of all the potential intervention policies for the reduction of traffic related emissions. The accurate description of the evolution of the source, following the renewal of the fleet with vehicles regulated by stricter emission standards, represents the basic premise for this evaluation. This paper outlines a proposed methodology for the evaluation of the trend of mobile source emissions, implemented on the calculation program EMISMOB, and reports the results obtained with its application to predict the evolution of traffic emissions in the urban area of Milan (Italy) until the year 2010

  17. Study of plutonium and americium contamination in agricultural area, radiological impact caused by consumption of vegetables of this area

    International Nuclear Information System (INIS)

    The transuranide concentration has been studied for 30 years in vegetable production, crops in wide extensions and in private-owned farms, all of them situated within the Pu-contaminated area of Palomares due to an air accident in 1966. Based on these studies, a preliminary estimation of the radiological risk caused by the consumption of these products by the inhabitants was possible. The results show that most of the fruits present a surface contamination, which disappears or is significantly reduced when they are washed. The contamination present in edible parts of the vegetables, as well as the contamination of other products included in the diet, has facilitated the estimation of the effective dose for ingestion and the committed effective dose for 50 years for the inhabitants. The main conclusions are: those plants, whose cultivation period is less than a year, present a low level of contamination; the green parts of the plants have a higher contamination than the fruits; the Pu soil to plant transfer factor is very low. In general, those plants that have remained in the contaminated land for several years present a high contamination level; the ingestion of products from Palomares does not represent an important risk for the population, even in the case that the products were totally consumed by a critical group.( author)

  18. Effects of Land Use Change on Carbon Emission:A Case Study of Yuheng Mining Area

    Institute of Scientific and Technical Information of China (English)

    Yarui; WU; Wenhai; XIA

    2014-01-01

    Land use is the main factor affecting the carbon emission. Taking Yuheng Mining Area as the research object,this paper chose two periods of remote sensing data of 1999 and 2006,and adopted the remote sensing image interpretation and supervised classification to study the changes in land use types and carbon sink in different periods in the mining area. The results showed that the area of arable land was reduced from 166. 96 km2 to 81. 10 km2,the area of woodland was increased from 46.79 km2 to 134. 53 km2,and arable land decreased by 51%,but carbon sink in the mining area still showed a rising trend; the carbon sink value increased by 16. 4 million yuan in 2006 compared to 1999,an increase of 40%,indicating that the reasonable land use pattern can improve the ecological environment,and promote the sustainable development of environment and economy in the mining area.

  19. Market definition studies for photovoltaic highway applications

    Science.gov (United States)

    1978-01-01

    Prospects for solar electric power in applications related to highways within the continental United States are examined. Principal prospective users are found to be the highway departments of the various states. Economic analysis is employed to demonstrate that suitable applications can occur when powering apparatus such as signs, crossing signals, or instruments which consume less than 100 watts on the average, provided they are located at least one-half mile from existing utility power. Such applications are projected to occur two or three times per state per year. Attitudes of highway officials toward possible use of solar power are sampled and described. Although falling photovoltaic cell prices are expected to have little effect on sales potential here, methods for federal stimulation of this market are discussed.

  20. Development and Application of Environmental Quality of Life Scale among People Residing near Three Types of Industrial Areas, Southern Thailand

    Science.gov (United States)

    Sopsuk, Jirawan; Chongsuvivatwong, Virasakdi; Sornsrivichai, Vorasith; Hasuwanakit, Supat

    2013-01-01

    To compare QOL among rural people living in three different industrial areas and one non-industrial area in southern Thailand. A questionnaire based on the WHOQOL-BREF with environmental assessment was initially developed. After consultation with experts and pilot study, it was tested to check internal reliability and further modified as…