WorldWideScience

Sample records for applications milan 24-27

  1. Mobile Applications as Tool for Exploiting Cultural Heritage in the Region of Turin and Milan

    Science.gov (United States)

    Rolando, A.; Scandiffio, A.

    2013-07-01

    visualization of data flows. In the current research, the field of investigation refers both to the territorial scale of Turin - Milan axis, and to the local scale of small cities localized in the territories in between. The research has been applied to Turin - Milan infrastructural axis, with the aim to represent the relationships that can be established between mobility infrastructure and cultural heritage. Such relationships should be intended in terms of accessibility from mobility infrastructure (motorway exit, service areas, railways stations) to cultural heritage localized in the surrounding landscape. The richness of cultural heritage and landscape along the chosen infrastructural bundle represent a great opportunity for territorial development in terms of attractiveness, both for local inhabitants and for tourists. Nowadays, the use of tracking technologies can be applied to investigate tourist flows, behaviors of local inhabitants in the historic city centre, number of visitors in the city and so on. In this sense it is possible to apply these technologies, which are particularly relevant in urban studies, extending them to the territorial scale of the Turin - Milan region. The large amount of available geo-referenced data can be used in different ways and it is very potential for different kind of analysis: it is possible to show tourist flows in the territory, receive information about more visited places, obtain interaction from users and cultural heritage in terms of visitors opinion about the places, give information to tourists about cultural places, monitor the accessibility to the places, understand the use of means of transport and keep under control the impacts of tourism (social, cultural, environmental) on territory. Applications based on smartphones can be considered a powerful device for visitors but also for institutions that are involved in tourism and cultural heritage management. In fact, the use of mobile applications it can produce a real time data

  2. MOBILE APPLICATIONS AS TOOL FOR EXPLOITING CULTURAL HERITAGE IN THE REGION OF TURIN AND MILAN

    Directory of Open Access Journals (Sweden)

    A. Rolando

    2013-07-01

    , analysis and visualization of data flows. In the current research, the field of investigation refers both to the territorial scale of Turin – Milan axis, and to the local scale of small cities localized in the territories in between. The research has been applied to Turin – Milan infrastructural axis, with the aim to represent the relationships that can be established between mobility infrastructure and cultural heritage. Such relationships should be intended in terms of accessibility from mobility infrastructure (motorway exit, service areas, railways stations to cultural heritage localized in the surrounding landscape. The richness of cultural heritage and landscape along the chosen infrastructural bundle represent a great opportunity for territorial development in terms of attractiveness, both for local inhabitants and for tourists. Nowadays, the use of tracking technologies can be applied to investigate tourist flows, behaviors of local inhabitants in the historic city centre, number of visitors in the city and so on. In this sense it is possible to apply these technologies, which are particularly relevant in urban studies, extending them to the territorial scale of the Turin – Milan region. The large amount of available geo-referenced data can be used in different ways and it is very potential for different kind of analysis: it is possible to show tourist flows in the territory, receive information about more visited places, obtain interaction from users and cultural heritage in terms of visitors opinion about the places, give information to tourists about cultural places, monitor the accessibility to the places, understand the use of means of transport and keep under control the impacts of tourism (social, cultural, environmental on territory. Applications based on smartphones can be considered a powerful device for visitors but also for institutions that are involved in tourism and cultural heritage management. In fact, the use of mobile applications it can

  3. 27 CFR 24.27 - Segregation of operations.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Segregation of operations. 24.27 Section 24.27 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Segregation of operations. The appropriate TTB officer may require the proprietor to segregate operations...

  4. Numerical models of pore pressure and stress changes along basement faults due to wastewater injection: Applications to the 2014 Milan, Kansas Earthquake

    Science.gov (United States)

    Hearn, Elizabeth H.; Koltermann, Christine; Rubinstein, Justin R.

    2018-01-01

    We have developed groundwater flow models to explore the possible relationship between wastewater injection and the 12 November 2014 Mw 4.8 Milan, Kansas earthquake. We calculate pore pressure increases in the uppermost crust using a suite of models in which hydraulic properties of the Arbuckle Formation and the Milan earthquake fault zone, the Milan earthquake hypocenter depth, and fault zone geometry are varied. Given pre‐earthquake injection volumes and reasonable hydrogeologic properties, significantly increasing pore pressure at the Milan hypocenter requires that most flow occur through a conductive channel (i.e., the lower Arbuckle and the fault zone) rather than a conductive 3‐D volume. For a range of reasonable lower Arbuckle and fault zone hydraulic parameters, the modeled pore pressure increase at the Milan hypocenter exceeds a minimum triggering threshold of 0.01 MPa at the time of the earthquake. Critical factors include injection into the base of the Arbuckle Formation and proximity of the injection point to a narrow fault damage zone or conductive fracture in the pre‐Cambrian basement with a hydraulic diffusivity of about 3–30 m2/s. The maximum pore pressure increase we obtain at the Milan hypocenter before the earthquake is 0.06 MPa. This suggests that the Milan earthquake occurred on a fault segment that was critically stressed prior to significant wastewater injection in the area. Given continued wastewater injection into the upper Arbuckle in the Milan region, assessment of the middle Arbuckle as a hydraulic barrier remains an important research priority.

  5. Seasonal behavior of PM2.5 deliquescence, crystallization, and hygroscopic growth in the Po Valley (Milan): Implications for remote sensing applications

    Science.gov (United States)

    D'Angelo, Luca; Rovelli, Grazia; Casati, Marco; Sangiorgi, Giorgia; Perrone, Maria Grazia; Bolzacchini, Ezio; Ferrero, Luca

    2016-07-01

    Atmospheric aerosols deliquescence and crystallization relative humidity (DRH and CRH) are rarely measured compared to the worldwide number of hygroscopicity measurements; this feature comes from the lack of an efficient method able to capture the whole complexity of chemical composition of aerosols. Despite this, the knowledge of both DRH and CRH are crucial for a correct parameterization of the aerosol hygroscopic growth used in different applications, among which the remote sensing is very important. In this paper, a newly developed technique (direct current conductance method) was applied in an aerosol chamber to Milan PM2.5 samples, to identify aerosol DRH and CRH both during winter and summer. These results were compared with those independently obtained by gravimetric measurements conducted in the chamber using a microbalance. Microbalance data allowed also the determination of the mass hygroscopic growth factor on the collected PM2.5 samples. Results evidenced first a good agreement between the two methods (RMSE = 2.7% and 2.3% for DRH and CRH, respectively). Collected data evidenced the hysteresis behavior of ambient particles and variability in both DRH and CRH between the two seasons. Summer samples showed higher DRH and CRH (on average 71.4 ± 1.0% RH and 62.6 ± 1.2% RH, respectively) than the winter ones (on average 55.2 ± 0.7% RH and 46.9 ± 0.6% RH). This behavior was related to the higher content of sulfates during the summer season. Conversely, the mass hygroscopic growth factor at 90% RH was higher for winter samples (2.76 ± 0.06) with respect to the summer ones (1.91 ± 0.11). Since hysteresis behavior affects optical properties of aerosols, when RH conditions are within the loop, the hygroscopic growth factor could be assigned in a wrong way. Thus, the growth factor was calculated within the hysteresis loop for both upper and lower branches: results showed that difference in hygroscopic growth factor could reach up the 24%.

  6. The water footprint of Milan.

    Science.gov (United States)

    Vanham, D; Bidoglio, G

    2014-01-01

    This study quantifies the water footprint of consumption (WFcons) and production (WFprod) of Milan. The current WFcons amounts to 6,139 l/cap/d (a volume of 2.93 km(3) annually), of which 52 l/cap/d (1%) is attributed to domestic water, 448 l/cap/d (7%) to the consumption of industrial products and 5,639 l/cap/d (92%) to the consumption of agricultural products. The WFprod is 52 l/cap/d. Milan is thus a net virtual water importer, predominantly through the import of agricultural products. These are produced outside city borders, both in Italy and abroad. This shows the dependency of city dwellers on water resources from other river basins. In addition, the WFcons for a healthy diet (based on Mediterranean Food-Based Dietary Guidelines) and a vegetarian diet are analysed. The current Milanese diet consists of too much sugar, crop oils, meat, animal fats, milk and milk products and not enough cereals, rice, potatoes, vegetables and fruit. The latter two diets result in substantial WFcons reductions: -29% (to 4,339 l/cap/d) for a healthy diet and -41% (to 3,631 l/cap/d) for a vegetarian diet. Indeed, a lot of water could be saved by Milan citizens through a change in their diet. A sustainable city should account for its impacts beyond its borders.

  7. The Belgian participation in the Milan Triennials

    NARCIS (Netherlands)

    Floré, F.M.W.

    2012-01-01

    The Milan Triennials were a series of international exhibitions on design, fine arts, architecture and urban planning. Their history dates back to 1923 and includes several historical episodes. Since the beginning Belgium was a regular participant in the Milan Triennials. This paper discusses the

  8. Dr. E.S. Mulder, Die Teologie van die Jesaja-apokalipse (Jes. 24-27 ...

    African Journals Online (AJOL)

    Dr. E.S. Mulder, Die Teologie van die Jesaja-apokalipse (Jes. 24-27). Proefschrift ter verkrijging van de graad van Doctor in de Godgeleerdheid aan de Rijksuniversiteit te Groningen. Groningen, J. B. Wolters, 1954, 125 bis.

  9. Stones used in Milan architecture

    Directory of Open Access Journals (Sweden)

    Folli, Luisa

    2008-06-01

    Full Text Available The city of Milan lies in a plain with clayey soil well suited to brick-making, but no stone deposits. An ample supply of stone is available, however, in the surrounding hills and mountains, which are connected to the city via both natural and artificial waterways. The types of stone used since Roman times include: granite, marble and gneiss from Ossola Valley; dolomite from Lake Maggiore; detrital limestone from Ceresio Valley; sandstone from the Brianza Hills; black limestone and marble from Lake Como; and conglomerate and sandstone from the Adda River basin. Traditionally, the chief uses have been dimension stone (all stones, column shafts (granite, slabs (marble, moulding (dolomite, limestone and ornamental (marble, dolomite, limestone.La ciudad de Milán se encuentra en una llanura de suelo arcilloso adecuado para la fabricación de ladrillos pero en la cual no hay yacimientos de rocas. No obstante, en las colinas y montañas circundantes, que están comunicadas con la ciudad mediante vías navegables naturales y artificiales, sí existe una abundante cantidad de piedra. Entre los tipos de piedra utilizados desde la época de los romanos se encuentran granitos, mármoles y gneises del valle de Ossola, dolomías del lago Mayor, calizas detríticas del valle de Ceresio (Lugano, areniscas de las colinas de la Brianza, calizas negras y mármoles del lago Como y conglomerados y areniscas de la cuenca del río Adda. Tradicionalmente, los principales usos han sido la piedra de fábrica (todas ellas, fustes de columnas (granito, losas (mármol, molduras (dolomía, caliza y ornamental (mármol, dolomía, caliza.

  10. Milan in the age of global contract.

    Directory of Open Access Journals (Sweden)

    Paolo Perulli

    2014-12-01

    Full Text Available Milan is not only the golden location of the fashion and design industries as well as hightech research centres. What is peculiar about Milan, compared to London or Paris, is the contradiction between high density growth (made in the past by industry and the working class, today by finance and the creative class, and low polity. Milan is based on an external source of power corresponding to a weak nation-state. The local élites have been only partially able to negotiate with the central government. The past and recent history of Milan is one of fragmented urban expansion and limited vision. Here the urban contract is based on the (historically variable social relationships and compromises between these main axial systems: infrastructures, knowledge, and creative industry. The first is representative of heavy capitalist and financial interests; the second is the expression of the intellectual capital of the city; the third has the flavour of the new emerging forces of the creative class. Analysing also some other Milan’s features it is clear that the urban contract is made of both local and global players in an asymmetric game.

  11. Epitafos Logos: Milan Mráz

    Czech Academy of Sciences Publication Activity Database

    Boháček, Kryštof

    2011-01-01

    Roč. 59, č. 1 (2011), s. 136-138 ISSN 0015-1831 Institutional research plan: CEZ:AV0Z90090514 Keywords : Milan Mráz * Aristotle * Philosophical Institute of the Czech Academy of Sciences Subject RIV: AA - Philosophy ; Religion

  12. Integrating decision support tools and environmental information systems: a case study on the Province of Milan

    International Nuclear Information System (INIS)

    Bagli, S.; Pistocchi, A.; Mazzoli, P.; Valentini, P.

    2006-01-01

    The paper demonstrates an application of advanced decision support tools within the framework of the environmental information system of the Province of Milan. These tools include environmental simulation models, multi criteria analysis, risk analysis and environmental accounting for marketable emission permits. After describing the general structure of the system, three demonstrational case studies are introduced concerning: groundwater pollution management; atmospheric pollution management; urban environmental quality perception and management. In the conclusion, potential use of tools like the ones implemented by the province of Milan within the framework of Local Agenda 21 processes is recalled [it

  13. Evolution of Milan microclimate in XX century

    International Nuclear Information System (INIS)

    Schieroni, A.

    1993-01-01

    Within the framework of studies to correlate the use of fossil fuels with urban area thermal pollution, this article examines the local microclimate of Milan, describing the main features of the so-called 'heat island' phenomenon and analyzing the evolution of ambient temperatures. Two different kinds of data on urban temperatures were employed: the hourly measurements taken by the Multinational Presidium for Hygiene and Prevention, run by the Local Sanitary Unit No. 75 of Milan, in the period ranging from 1985 to 1990, and the maximum and minimum daily values referring to the period between 1909 and 1991 (data supplied by the Meteorologic Observatory of Brera-Duomo). The standard year, worked out in the framework of the C. N. R. (National Research Centre) Finalized Energy Project and referring to the meteorological station of Linate Airport, was employed in order to highlight the difference between the thermal behaviour of the urban and the extra-urban area

  14. Milan's 1879 and 1882 gold coins

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2014-01-01

    Full Text Available Following the exhausting wars against Turkey, Prince Milan Obrenović decided to mint larger denominations of silver and gold coins. The decision on minting these coins was explained by the fact that for the purpose of foreign payments, the expensive foreign money will no longer have to be purchased, given that the Serbian money will be recognized at its nominal value outside Serbia as well. The Law on the Serbian National Money confirmed by Prince Milan on December 10th 1878 introduced new types of metal coins into the monetary system of Serbia: 10 and 20 dinars in gold, 5 dinars in silver, and 2 paras in copper. All these coins were minted in 1879, except for the 10-dinar gold coin, minted when Prince Milan became the King, bearing the inscription of 1882. There were only 50,000 pieces of the 20-dinar gold coins minted, and it was legal tender in the Principality and Kingdom of Serbia, as well as in the Kingdom of Serbs, Croats and Slovenes, and in the Kingdom of Yugoslavia, for full 52 years. In 1882 there were 500,000 pieces of 10-dinar gold coins and 200,000 pieces of 20-dinar gold coins minted. They were named Milandors, and were used as official legal tender until June 28th 1931.

  15. Mass gatherings in Italy: a study from the 2015 Milan Expo

    Directory of Open Access Journals (Sweden)

    Pietro Marino

    2016-07-01

    Full Text Available Introduction. A mass gathering (MG is when a large number of people come together in a particular location for a specific purpose. Expo 2015 was an universal exposition hosted by Milan, Italy. The Pre-Hospital Emergency Company (AREU of Lombardy Region (Milan-Italy was involved in planning and managing the emergency rescue response inside the Expo 2015 area in Milan. In this paper, we review the AREU medical and public health response for the 2015 Milan Expo. Methods. Existing risk-assessment processes for MGs were used (the Arbon Predictive Score and Maurer Score to define the expected resources and the impact on the health systems. The objective of the plan was to reduce the impact of the event by adopting the model of First Aid Points (advanced medical posts deployed in the event site acting as ‘first health filters’ for the hospital network in Milan. Results. Our data indicate that 13,579 visitors were rescued in the ‘Red Area’ from 1 May to 31 October (with an average of 73 cases per day; 9,501 of them needed initial treatment or observation time at the First Aid Points, 1,289 of them were hospitalised (1% Red code, 29% Yellow code, 70% Green code; 65% of patients (57% female, with a mean age of 37 years old had medical problems. Fatigue, light- headedness, dizziness, syncope, loss of consciousness and headache were the prevalent medical diagnoses. Conclusions. Our study confirms that environmental factors, such as the weather, can contribute to large numbers of ill people at MGs. Overall, the AREU of Lombardy Region demonstrated excellent preparation for the Expo 2015 MG. Flexibility, integration and strong cooperation between the pre-hospital settings and hospitals were incorporated into the application of the plan. The final data showed the effectiveness of the adopted model and the reduced impact on the hospital network.

  16. Zemřel JUDr. Milan Princ (1926-2016)

    Czech Academy of Sciences Publication Activity Database

    Nechvátal, Bořivoj; Šlesingerová, Lada

    2016-01-01

    Roč. 76, č. 5 (2016), s. 554-556 ISSN 1210-5538 Institutional support: RVO:67985912 Keywords : Milan Princ * archaeology * historic preservation * obituary * personal bibliography Subject RIV: AC - Archeology, Anthropology, Ethnology

  17. „Diderot miloval mystifikace“, a co Milan Kundera?

    Czech Academy of Sciences Publication Activity Database

    Jungmannová, Lenka

    2017-01-01

    Roč. 65, č. 2 (2017), s. 235-256 ISSN 0009-0468 Institutional support: RVO:68378068 Keywords : Czech drama * Kundera, Milan * Steigerwald, Karel Subject RIV: AJ - Letters, Mass-media, Audiovision OBOR OECD: Specific literatures

  18. Milan Kundera poeediparukaga faun / Kärt Hellerma

    Index Scriptorium Estoniae

    Hellerma, Kärt, 1956-

    1996-01-01

    Arvustus: Kundera, Milan. Surematus. Tln. : Monokkel, 1995. Ilmunud ka kogumikus: Hellerma, Kärt. Kohanenud kirjandus : valik kirjanduskriitikat 1987-2006. Eesti Keele Sihtasutus : Tallinn, 2006. Lk. 176-179

  19. Chemically and size-resolved particulate matter dry deposition on stone and surrogate surfaces inside and outside the low emission zone of Milan: application of a newly developed "Deposition Box".

    Science.gov (United States)

    Ferrero, Luca; Casati, Marco; Nobili, Lara; D'Angelo, Luca; Rovelli, Grazia; Sangiorgi, Giorgia; Rizzi, Cristiana; Perrone, Maria Grazia; Sansonetti, Antonio; Conti, Claudia; Bolzacchini, Ezio; Bernardi, Elena; Vassura, Ivano

    2018-01-19

    The collection of atmospheric particles on not-filtering substrates via dry deposition, and the subsequent study of the particle-induced material decay, is trivial due to the high number of variables simultaneously acting on the investigated surface. This work reports seasonally resolved data of chemical composition and size distribution of particulate matter deposed on stone and surrogate surfaces obtained using a new method, especially developed at this purpose. A "Deposition Box" was designed allowing the particulate matter dry deposition to occur selectively removing, at the same time, variables that can mask the effect of airborne particles on material decay. A pitched roof avoided rainfall and wind variability; a standardised gentle air exchange rate ensured a continuous "sampling" of ambient air leaving unchanged the sampled particle size distribution and, at the same time, leaving quite calm condition inside the box, allowing the deposition to occur. Thus, the "Deposition Box" represents an affordable tool that can be used complementary to traditional exposure systems. With this system, several exposure campaigns, involving investigated stone materials (ISMs) (Carrara Marble, Botticino limestone, Noto calcarenite and Granite) and surrogate (Quartz, PTFE, and Aluminium) substrates, have been performed in two different sites placed in Milan (Italy) inside and outside the low emission zone. Deposition rates (30-90 μg cm -2  month -1 ) showed significant differences between sites and seasons, becoming less evident considering long-period exposures due to a positive feedback on the deposition induced by the deposited particles. Similarly, different stone substrates influenced the deposition rates too. The collected deposits have been observed with optical and scanning electron microscopes and analysed by ion chromatography. Ion deposition rates were similar in the two sites during winter, whereas it was greater outside the low emission zone during summer and

  20. DOE Grant to organize "International Symposium on Opportunities in Underground Physics", Asilomar, CA, May 24-27, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Babu, Kaladi S. [Oklahoma State Univ., Stillwater, OK (United States)

    2015-03-16

    The International Symposium in Opportunities in Underground Physics (ISOUP) was held in Asilomar, CA during May 24-27, 2013. The Symposium brought together scientists from the US and abroad for an open discussion on science opportunities provided by the possibility of a new generation of large underground detectors associated with long baseline neutrino beams. The Symposium was highly successful. The main focus of the Symposium was the science goals that could be achieved by placing such a detector deep underground.

  1. Interpersonal Control in Structural and Milan Systemic Family Therapy.

    Science.gov (United States)

    Friedlander, Myrna L.; And Others

    1991-01-01

    Compared structural and Milan systemic approaches to determine extent to which major proponents behave in ways that are consistent with theory. Focused on interpersonal control dynamics between therapist and family system. Findings from three published transcripts of each treatment were generally congruent with theory and reflected hypothesized…

  2. Building Techniques and Materials in Ancient and Medieval Milan

    Directory of Open Access Journals (Sweden)

    Paola Greppi

    2015-06-01

    Full Text Available The city of Milan preserve an amazing historical and architectural heritage, consisting of a high number of ancient churches, in most cases built to the origins of Christianity and transformed into new form during the Romanesque. In the article are synthetically presented the results of the research work of the writer about construction techniques of the most important churches in the city (S. Ambrogio, S. Simpliciano, S. Giovanni alle Fonti, S. Nazaro Maggiore, ..., trying to highlight the main changes between Late Antiquity and Romanesque. A large amount of stone material were used in Roman architecture of Milan and Lombardy, thanks to the geological variety of the territory. The Alps supplied granites, diorites, gneisses and marbles; the Prealps supplied limestones, dolomites, sandstones (Mesozoic and conglomerates (Quaternary; the Padània alluvial plain supplied pebbles, gravels, sands and clays (Quaternary. Each stone had a local use reaching the nearest towns (Como, Pavia, Milan, Bergamo, Brescia through waterways; the towns of the plain (Piacenza, Cremona, Mantua employed bricks made of local clay. Milano, the capital, employed also stones coming from abroad (limestones from Venetia and Friuli. White marbles of Apuanian Alps and coloured marbles of Eastern mediterranean were also diffused in Milan and other Lombard sites despite the laborious supplying. The stones quarried by the Romans were continuously used in the following centuries.

  3. Wabbes and the Milan Triennales: Representing the Belgian Nation

    NARCIS (Netherlands)

    Floré, F.M.W.; Ferran-Wabbes, Marie; Strauven, Iwan

    2012-01-01

    The work of the Brussels based furniture designer and interior architect Jules Wabbes played a significant role in the Belgian section of two successive Milan Triennials, that of 1957 and 1960. His sophisticated modern furniture and lightning designs were well qualified to represent the nation.

  4. Radiation protection courses in the Milan Copic Nuclear Training Centre

    International Nuclear Information System (INIS)

    Kozelj, M.; Stritar, A.

    1998-01-01

    We have briefly described the legal framework for the radiation protection training in Slovenia. The history of that activity at the Milan Copic Nuclear Training Center in Ljubljana is than described with the detailed description and summary of all performed courses.(author)

  5. Evolution of traffic emissions in European urban areas: Milan case study

    International Nuclear Information System (INIS)

    Giugliano, M.; Cemin, A.; Cernuschi, S.

    1992-01-01

    The worldwide increasing role of mobile sources on the air quality of urban areas requires a careful evaluation of all the potential intervention policies for the reduction of traffic related emissions. The accurate description of the evolution of the source, following the renewal of the fleet with vehicles regulated by stricter emission standards, represents the basic premise for this evaluation. This paper outlines a proposed methodology for the evaluation of the trend of mobile source emissions, implemented on the calculation program EMISMOB, and reports the results obtained with its application to predict the evolution of traffic emissions in the urban area of Milan (Italy) until the year 2010

  6. Milan systemic family therapy: a review of 10 empirical investigations

    OpenAIRE

    Carr, Alan

    1991-01-01

    Ten empirical investigations of Milan Family Therapy (MFT) are reviewed in this paper. The studies include both single and comparative group outcome trials; investigations of therapeutic process; clinical audit and consumer satisfaction surveys. Substantive findings and methodological issues are discussed in the light of family therapy and individual psychotherapy research generally. Findings indicate that MFT may lead to symptomatic change in two-thirds to three-quarters of cases and to syst...

  7. The temporary structures for Expo Milan 2015: environmental assessment and solutions for the end of life management

    Directory of Open Access Journals (Sweden)

    Monica Lavagna

    2014-05-01

    Full Text Available Politecnico di Milano University worked for the Italian Ministry of Environment, land and sea on the sustainability assessment of Expo Milan 2015 self-built temporary pavilions. The work has been focused on the improvement of the buildings environmental performances. Given the buildings short durability in place (Expo lasts for 6 months, the strategies for their end of life are of great importance for the carbon footprint reduction. Starting from the specific work on Expo Milan 2015, the Politecnico di Milano working group proceeded with the methodology research about this issue, applicable also to future events. This paper presents the different relevant aspects of mega events temporary buildings end of life management; dealing with methodological, technical and managerial aspects.

  8. Sound quality indicators for urban places in Paris cross-validated by Milan data.

    Science.gov (United States)

    Ricciardi, Paola; Delaitre, Pauline; Lavandier, Catherine; Torchia, Francesca; Aumond, Pierre

    2015-10-01

    A specific smartphone application was developed to collect perceptive and acoustic data in Paris. About 3400 questionnaires were analyzed, regarding the global sound environment characterization, the perceived loudness of some emergent sources and the presence time ratio of sources that do not emerge from the background. Sound pressure level was recorded each second from the mobile phone's microphone during a 10-min period. The aim of this study is to propose indicators of urban sound quality based on linear regressions with perceptive variables. A cross validation of the quality models extracted from Paris data was carried out by conducting the same survey in Milan. The proposed sound quality general model is correlated with the real perceived sound quality (72%). Another model without visual amenity and familiarity is 58% correlated with perceived sound quality. In order to improve the sound quality indicator, a site classification was performed by Kohonen's Artificial Neural Network algorithm, and seven specific class models were developed. These specific models attribute more importance on source events and are slightly closer to the individual data than the global model. In general, the Parisian models underestimate the sound quality of Milan environments assessed by Italian people.

  9. 24 - 27 BIT Corrected

    African Journals Online (AJOL)

    DR. AMIN

    of alarming intensity. The design of a solar energy conversion system requires precise knowledge regarding the availability of global solar radiation and its components at the location of interest. Since the solar radiation reaching the earth's surface depends upon climatic conditions of the place, a study of solar radiation ...

  10. The radioactive cloud on Milan and other neighbouring sites

    International Nuclear Information System (INIS)

    Capra, D.; Facchini, U.; Gianelle, V.; Marcazzan, G.M.; Ravasini, G.; Carreri, V.; Gualdi, R.; Sgorbati, G.; Tebaldi, G.

    1986-01-01

    The radioelements spread from the nuclear disaster in Ukraina reached the Milan atmosphere the evening of April, 30. A number of measurements started on air particulate; a number of radioelements was evidenced: Iodine, Tellerium, Cesium, Ruthenium and other. Then the presence of radioelements have been found in rain, in the first days of May, and consequently in the soil. Different samples show that the level of radioactivity in the Como lake area was greater than the average levels in Lombardy by a factor 2 or 3. Direct measurements of the gamma level on the ground give more evidence to this fact. The role of the rainfalls is discussed

  11. Transcultural itineraries of architect Milan Zloković

    Directory of Open Access Journals (Sweden)

    Blagojević Ljiljana

    2011-01-01

    Full Text Available The paper looks in more detail into the biography of one of the most prominent modern architects in Serbia, Milan Zloković (1898, Trieste - 1965, Belgrade, by focusing on the multicultural contexts of his childhood, youth and education as possible sources of his particular creative disposition and habit of mind. The argument is centred on exploring the course of the architect's interests, impressions, and studies, as they changed over the years in the complex historical conditions of the opening decades of the twentieth century. The paper argues that experiences from this period formed what is termed as the identity of multiple geographies, which guided much of Zloković's predilection in his later architectural work, and provided a transcultural frame of reference and breadth to his research. Traced back and analyzed against the biographical facts and events, are excerpts from his later articles and scholarly papers, most notably the ones where he provides references to architectural history of, inter alia, Byzantine architecture in Macedonia, medieval Serbian architecture, Italian Baroque, or traditional architecture of Boka Kotorska. The aim of the research is to contribute to a broader understanding of the complex cultural basis and polyvalent discourse of Serbian modernism, in the foundation of which Milan Zloković had a decisive role.

  12. Early Greek Typography in Milan: A Historical Note on a New Greek Typeface.

    Science.gov (United States)

    Wallraff, Martin

    1997-01-01

    Discusses the history of Greek typography, focusing on the first book to be entirely printed in Greek in 1476 and the series of new typefaces that resulted. Cites Milan as a center of Greek printing in the early history of Greek typography. Describes a revival of one of these typefaces created under the name of Milan Greek. (PA)

  13. The Milan Project: a newborn hearing screening programme.

    Science.gov (United States)

    Pastorino, Giancarlo; Sergi, Paola; Mastrangelo, Massimo; Ravazzani, Paolo; Tognola, Gabriella; Parazzini, Marta; Mosca, Fabio; Pugni, Lorenza; Grandori, Ferdinando

    2005-04-01

    Since 1997 a newborn hearing screening programme has been implemented by the U.O. Neurologia-Neurofisiopatologia and Dipartimento di Neonatologia of the Istituti Clinici di Perfezionamento ICP in Milan for both babies with no risk and those at risk of hearing impairment. This programme was named the Milan Project. The protocol for no-risk babies consisted of three stages: in the first two stages, newborns were tested with transient click-evoked otoacoustic emissions (TEOAE), in the third one with conventional auditory brainstem responses (ABR). The first TEOAE test was performed by 36 h of age, before discharge, the second one after 15-30 d in case of referral, and the third one, by ABR, for those babies who failed the second TEOAE stage. Newborns at audiological risk were submitted to conventional ABR before the third month of corrected age. Some of this latter population was also submitted to the TEOAE test. The entire tested population (no-risk babies and newborns at audiological risk) consisted of 19 777 babies: 19 290 without risk ("no risk") and 487 at risk ("at risk"). During the course of the Milan Project, hearing impairment (ABR threshold equal to or greater than 40 dB nHL) was identified in 63 newborns (19 from the no-risk and 44 from the at-risk population), with a prevalence of 0.32%. Bilateral hearing impairment (BHI) was found in 33 newborns (10 from the no-risk and 23 from the at-risk population), corresponding to 0.17%. Among infants with bilateral hearing impairment, 30.3% had no risk factors. The prevalence of hearing impairment was determined on days 15-30 after birth. The results show that the implementation of a hospital-based, universal neonatal hearing screening programme for babies with and without audiological risk is feasible and effective. The effectiveness of the programme has increased as a function of the years since its inception, with a strong decrease in the referral rate. Further improvement is obtained if the TEOAE measurements

  14. Archaeometric study of fictile tubes from three churches in Milan

    Science.gov (United States)

    Galli, A.; Bonizzoni, L.; Martini, M.; Sibilia, E.

    2008-07-01

    Fictile tubes (or vaulting tubes) are architectural elements that sustain and underline the shapes of cupolas and vaults. Several of these, sampled in three churches of Milan (S. Ambrogio, S. Lorenzo and Duomo) have been recently dated at the Archaeometry Laboratory of Milano Bicocca University. These architectural elements, differently shaped, styled and sampled from different structures, were all produced, according to thermoluminescence (TL), in the period 970 1080 AD. Energy dispersive X-rays fluorescence (EDXRF) measurements were performed to obtain the elemental composition of the clays and to attempt a classification of the samples. Multivariate PCA (principal components analysis) analyses and HCA (hierarchical clusters analysis) did not show any grouping of similarity. On the basis of the results, a tentative historical interpretation could be proposed.

  15. Selected Abstracts of the 8th International Workshop on Neonatology; Cagliari (Italy; October 24-27, 2012

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2012-10-01

    Full Text Available Selected Abstracts of the 8th International Workshop on Neonatology • SYSTEMS MEDICINE IN PERINATOLOGY AND PEDIATRICS TAILORED BIOMARKERS, DRUGS AND TREATMENTS • Cagliari (Italy • October 24th-27th 2012The Workshop has been organized on behalf of Union of European Neonatal and Perinatal Societies, Union of Mediterranean Neonatal Societies, Italian Society of Neonatology, UNICEF, and under the High Patronage of the President of the Italian Republic. ABS 1. Urinary metabolomics as a new strategy to discriminate response to ibuprofen therapy in preterm neonates with patent ductus arteriosus • M. Castell Miñana et al.; Valencia (Spain ABS 2. A metabolomic approach to identify preterm neonates born of mothers with chorioamnionitis: preliminary data • L. Pugni et al.; Milan, Cagliari (Italy ABS 3. Urinary metabolomics in twins at birth • L. Paladini et al.; Lecce, Rome, Cagliari (Italy ABS 4. From prenatal diagnosis to neonatology: risk and protective factors in the development of mother-preterm child relationship • E. Boni et al.; Pavia (Italy ABS 5. Prolonged refrigerated storage of human milk: effects on nutritive and non-nutritive characteristics • P. Di Nicola et al.; Turin (Italy ABS 6. Use of donor human milk in nicu: is donor milk competing with breastfeeding or supporting it? • P. Di Nicola et al.; Turin (Italy ABS 7. Prenatal diagnosis of methymalonic aciduria and homocistinuria Cbl-C type using dna analysis • A. Zappu et al.; Cagliari (Italy ABS 8. Human breast milk vs formula milk. Is 1H-nmr metabolomics able to help to find the right formula? • A. Noto et al.; Cagliari (Italy ABS 9. A 1H-NMR study of Crisponi syndrome: can metabolomics help to describe the disorder? • M. Lussu et al.; Cagliari (Italy ABS 10. Nestin immunoreactivity in the developing human kidney • Y. Gibo et al.; Matsumoto (Japan, Rome, Cagliari (Italy ABS 11. A non-invasive approach to characterize epileptic children born elbw compared to

  16. ESO Council Visits First VLT Unit Telescope Structure in Milan

    Science.gov (United States)

    1995-12-01

    As the ESO Very Large Telescope (VLT) rapidly takes on shape, Europe has just come one step closer to the realisation of its 556 million DEM astronomical showcase project. Last week, the ESO Council held its semi-annual meeting in Milan (Italy) [1]. During a break in the long agenda list, Council members had the opportunity to visit the Ansaldo factory in the outskirts of this city and to see for the first time the assembled mechanical structure of one of the four 8.2-metre VLT Unit telescopes. This Press Release is accompanied by a photo that shows the ESO Council delegates in front of the giant telescope. After a long climb up the steep staircase to the large Nasmyth platform at the side of the telescope where the astronomical instruments will later be placed, Dr. Peter Creola (Switzerland) , President of the ESO Council and a mechanics expert, grabbed the handrail and surveyed the structure with a professional eye: `I knew it was going to be big, but not that enormous!', he said. Other delegates experienced similar feelings, especially when they watched the 430 tonnes of steel in the 24-metre tall and squat structure turn smoothly and silently around the vertical axis. The Chairman of the ESO Scientific Technical Committee (STC), Dr. Johannes Andersen (Denmark) , summarized his first, close encounter with the VLT by `This is great fun!' and several of his colleague astronomers were soon seen in various corners of the vast structure, engaged in elated discussions about the first scientific investigations to be done with the VLT in two years' time. The VLT Main Structures The visit by Council took place at the invitation of Ansaldo Energia S.p.A. (Genova), EIE-European Industrial Engineering S.r.I. (Venice) and SOIMI-Societa Impianti Industriale S.p.A. (Milan), the three Italian enterprises responsible for the construction of the main structures of the VLT 8.2-metre Unit telescopes. Short speeches were given on this occasion by Drs. Ferruccio Bressani (Ansaldo

  17. The Soundscape Quality in Some Urban Parks in Milan, Italy

    Directory of Open Access Journals (Sweden)

    Giovanni Zambon

    2013-06-01

    Full Text Available Urban parks play an important role in preserving and promoting the health of citizens who are often exposed to noise pollution and the stress of daily life. The present study describes the main results obtained from a survey performed in five urban parks in Milan. Measurements of the acoustic environment were carried out in 29 sites together with interviews with 231 users on certain aspects of the parks not limited to merely sound. Acoustic data show that the surveyed parks mostly do not comply with the noise limit issued by the Italian legislation on protected areas. The unweighted 1/3-octave spectrum centre of gravity G and LA50 perform satisfactorily in discriminating among the acoustic environments. Such clear distinction was not observed in the subjective ratings on the perceived quality of the soundscape, likely due to the influence by non-acoustic factors that act as mediators in the assessment. This hypothesis is supported by the collected data on the perceived quality of quietness, which was rated worse than that of the soundscape. Comparing acoustic data with ratings, the perceived quality of the total environment was found to be less dependent on LAeq than soundscape and quietness.

  18. The valorisation of abandoned railway yards. The case of Milan

    Directory of Open Access Journals (Sweden)

    Elena Mussinelli

    2012-04-01

    Full Text Available Milan’s urban growth was heavily influenced by the structure of the rail network for transporting goods and people. The great railway yards that used to service the industrial system have now lost their raison d'être after the relocation of industrial plants and the tertiary sector dynamics took over the city. These have become large abandoned brownfields or soon to be abandoned, totaling over 1,300,000 square meters, located mainly along the urban belt surrounding the city walls, often in densely built environments. Since 2005 these areas were the subject of several agreements between the City of Milan, State Railways SpA (FS and the Lombardy Region, to examine various scenarios and the feasibility of their conversion, as confirmed in the draft of the new Territorial Government Plan (PGT, which identifies the Areas of Urban Transformation. Scenarios and assumptions that, in the current revision of the PGT, must approach the strategic role of this rich heritage from an environmental regeneration and valorization perspective extended to urban and metropolitan scales.

  19. The soundscape quality in some urban parks in Milan, Italy.

    Science.gov (United States)

    Brambilla, Giovanni; Gallo, Veronica; Zambon, Giovanni

    2013-06-06

    Urban parks play an important role in preserving and promoting the health of citizens who are often exposed to noise pollution and the stress of daily life. The present study describes the main results obtained from a survey performed in five urban parks in Milan. Measurements of the acoustic environment were carried out in 29 sites together with interviews with 231 users on certain aspects of the parks not limited to merely sound. Acoustic data show that the surveyed parks mostly do not comply with the noise limit issued by the Italian legislation on protected areas. The unweighted 1/3-octave spectrum centre of gravity G and LA50 perform satisfactorily in discriminating among the acoustic environments. Such clear distinction was not observed in the subjective ratings on the perceived quality of the soundscape, likely due to the influence by non-acoustic factors that act as mediators in the assessment. This hypothesis is supported by the collected data on the perceived quality of quietness, which was rated worse than that of the soundscape. Comparing acoustic data with ratings, the perceived quality of the total environment was found to be less dependent on LAeq than soundscape and quietness.

  20. Final method evaluation: development of spatially resolved emission inventories for Milan and Athens

    International Nuclear Information System (INIS)

    Winiwarter, W.; Vlachogiannis, D.; Gounaris, N.; Bartzis, J.; Ekstrand, S.; Tamponi, M.; Licotti, C.; Maffeis, G.; Dore, C.; Hayman, G.

    2001-10-01

    Emission inventories have been prepared for the Milan province, Italy, and for the greater Athens area, Greece using the methodology developed and refined in earlier work packages of the EC-funded IMPRESAREO project. Emission totals have been spatially-disaggregated onto a 1x1 km 2 grid CORINE land-cover data derived from earth observation (EO) was used as the main input for distributing the emission totals (taken as the totals of the bottom-up inventory). As in the earlier applications of the IMPRESAREO methodology, additional non-EO information was included to improve the spatial disaggregation - this was specifically census data, the road network and traffic counts, and centrally available data on point source emissions. Emission inventories for Milan were generated for three compounds (NO x , NMVOC and CO), while emission inventories of SO 2 and CO 2 were prepared for Athens in addition to these three pollutants. Distributing emissions to the respective land use type was based on the use of 'emission weighting factors' which had been derived in previous work packages of the IMPRESAREO project. The resulting top-down inventories were compared to the existing bottom up inventories using a number of quantitative and qualitative methods, which had been developed during previous stages of the project, or newly developed here. The results prove that the IMPRESAREO methodology provides useful emission inventories. The needs of a user can be taken to steer the effort (and the costs) which have to be put into the inventory. Tables are provided that describe the return in number of 'acceptable' grid cells depending on the detail level of the inventory. Also, the high importance of the traffic grid to a map representation of the inventory is shown, and the influence single point sources may have on the overall emission total, even of an urban region, is indicated. For environmental assessment purposes, this emphasises the need for a proper assessment of these point source

  1. The return of the dinar: Metal coins of Prince and King Milan Obrenovic (1854-1901

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2014-01-01

    Full Text Available In Serbia liberated from the Turkish rule, the copper coins of Mihailo M. Obrenovic were 'the first Serbian coins minted after the medieval coins', which were, however, 'put into circulation after Mihailo's unfortunate demise', at the beginning of Prince Milan's reign. The coins of Prince Milan are specific because they were the first coins to bear the inscription dinar, named after the medieval coins used in the Serbian states. The silver 1- and 2-dinar and 50-para coins were minted in 1875 in the first years of the adult Prince Milan Obrenovic's reign, whereas the silver 50-para, 1-, 2- and 5-dinar coins, the copper 5- and 10-para coins, and the gold 20-dinar coins, were minted in 1879, as the crown to the final independence of the Princedom of Serbia from the Turkish rule.

  2. Turistički značaj galerije 'Milan Konjović' u Somboru

    Directory of Open Access Journals (Sweden)

    Besermenji Snežana

    2008-01-01

    Full Text Available A gallery 'Milan Konjović' in Sombor is a culture establishment in which there are exhibited works of a famous impressionist Milan Konjovic. It was opened in 1966 and it is placed in a Galley house, on the Square of Holy Three. Works of Milan Konjović are presented by chronological productions and occasional thematic exhibitions, and a collection consists of 1060 works today. In order to notice the tourist importance of this establishment, in this work there will be done a SWOT analysis which will point to internal abilities and internal weakness on one hand and, on the other hand, there will be analyzed exterior possibilities and those are chances and threats from the surroundings. Considering the fact that conditions in our institutions of culture are on unsatisfactory level, in this paper two affirmed galleries in London will be presented: the Tate Gallery and the Tate Modern, which represent positive example of successful management in cultural institutions.

  3. Literary Narratives as Constituents of Political Worlds: The Case of Milan Kundera

    Czech Academy of Sciences Publication Activity Database

    Fořt, Bohumil

    2012/2014, 7/8 (2014), s. 38-50 ISSN 2213-0535 Institutional support: RVO:68378068 Keywords : fictional world * politics * Kundera, Milan Subject RIV: AJ - Letters, Mass-media, Audiovision http://cf.hum.uva.nl/narratology/issue/7/a12_Bohumil_Fort.html

  4. Construction and assembling of the trim coils for the Milan superconducting cyclotron

    International Nuclear Information System (INIS)

    Baccaglioni, G.; Cartegni, G.C.; Fusetti, M.; Gini, L.; Grilli, L.

    1986-01-01

    This paper presents the main characteristics of the trim coils realized for the heavy ions superconducting cyclotron under construction at the Milan University. The guidelines in the choice of the conductor size, of the insulation and cooling parameters are discussed in some details. The main operations in the coils construction, as winding, impregnation, electrical tests and assembling, are described

  5. Ärimees ootab annetuse eest Keskerakonnalt vastuteenet / Dannar Leitmaa, Erik Rand, Milan Bališ

    Index Scriptorium Estoniae

    Leitmaa, Dannar, 1982-

    2009-01-01

    Slovakkia ärimehed annetasid Eesti Keskerakonnale 1,4 mln. krooni, avaliku teenistuse eetikakoodeksi autor Ivar Tallo peab välismaistelt annetajatelt raha saamist taunitavaks. Annetustest teistele erakondadele I kvartalis. Vt. samas lühiintervjuud Milan Bališiga

  6. SUSTAINABILITY OF SHORT FOOD SUPPLY CHAINS: ANALYSIS OF RAW MATERIAL SUPPLY IN MILAN PUBLIC SCHOOL CATERING

    Directory of Open Access Journals (Sweden)

    G. D’Anna

    2009-09-01

    Full Text Available The demand of short food supply chains is becoming more pressing by consumers, especially in the largest school catering. The implementation of the short chain in a large catering company of Milan, is described in this practical contribution. Several aspects of short food chains sustainability: legal, commercial and economic sustainability, hygienic and gastronomic sustainability, are discussed.

  7. Follow-up of 53 Alzheimer patients with the MODA (Milan Overall Dementia Assessment).

    Science.gov (United States)

    Capitani, E; Manzoni, L; Spinnler, H

    1997-01-01

    Fifty-three patients affected by Alzheimer's disease entered a longitudinal survey aimed at studying which factors influence the rate of progression, assessed by means of the Milan Overall Dementia Assessment (MODA). The second examination was carried out, on average, after 16 months from the first assessment. Only age proved to influence the decline rate, which was faster in elders.

  8. Religious tolerance in the Edict of Milan and in the Constitution of Medina

    Directory of Open Access Journals (Sweden)

    Đurić Drago

    2013-01-01

    Full Text Available In this paper, we will try to offer a blueprint for a more general discussion of the relation of how the question of religious tolerance appears in two documents that the Christian and Islamic traditions recognize and celebrate: namely, the Edict of Milan and the Constitution of Medina. These documents were revolutionary for their time. However, these documents alone, as well as religious teachings, on which they are based, cannot be the measure of relations in our time. They are presented in the conceptual framework and value system that prevailed at the time when these teachings and documents were created. Many relations the documents refer to no longer exist. For example, while the Edict of Milan affirms the general right to religion, and the Constitution of Medina affirms the mutual tolerance for Abrahamic, monotheistic religions - people who now declare themselves as atheists or agnostics are not even mentioned.

  9. Satellite air temperature estimation for monitoring the canopy layer heat island of Milan

    DEFF Research Database (Denmark)

    Pichierri, Manuele; Bonafoni, Stefania; Biondi, Riccardo

    2012-01-01

    across the city center from June to September confirming that, in Milan, urban heating is not an occasional phenomenon. Furthermore, this study shows the utility of space missions to monitor the metropolis heat islands if they are able to provide nighttime observations when CLHI peaks are generally......In this work, satellite maps of the urban heat island of Milan are produced using satellite-based infrared sensor data. For this aim, we developed suitable algorithms employing satellite brightness temperatures for the direct air temperature estimation 2 m above the surface (canopy layer), showing...... 2007 and 2010 were processed. Analysis of the canopy layer heat island (CLHI) maps during summer months reveals an average heat island effect of 3–4K during nighttime (with some peaks around 5K) and a weak CLHI intensity during daytime. In addition, the satellite maps reveal a well defined island shape...

  10. Altered Rhythms. Urban façades in post-war Milan

    Directory of Open Access Journals (Sweden)

    Magda Mària Serrano

    2017-10-01

    Full Text Available Urban façades are the outward manifestation of the character of a city, and are composed of elements that respond to rhythmic sequences in consonance with the internal order of the rooms behind them. In post-war Milan, façades were used as a field of experimentation by a group of architects, some of whom were also artists and designers, who saw themselves and can be seen as ambassadors for the future modernity of a city devastated by war. This article explains how the urban façades of Milan, based as they were on the themes drawn from the Italian compositional tradition, offer a wide variety of elements, figures and rhythms, altering and transgressing the compositional canons through the use of mechanisms that in some cases are closer to painting or sculpture than to architecture.

  11. Service Areas, Motorway Exits, Railway Stations: New Entrances to Access Expo 2015 Landscapes, between Milan & Turin

    Directory of Open Access Journals (Sweden)

    Andrea Rolando

    2014-12-01

    Full Text Available This paper aims at understanding how a better relationship between infrastructures and landscapes can be established, by encouraging new ways to experience and effectively use the places that are located near the infrastructural nodes. The work starts from the identification of a specific case study: the landscape in-between the cities of Milan and Turin, that are connected by the infrastructural bundle made of the three lines of the regional / historical railways, the motorway and the new tracks of the high speed train. The research highlights cultural heritage sites and places of interest, points out a series of areas and routes that connect them with the infrastructure. The Milan 2015 Expo could in this sense be a very powerful catalyst, by encouraging these intermodal uses of the infrastructural bundle to reach and truly experience the agricultural and cultural landscapes located around it.

  12. Milan rainfall series: Reconstruction of monthly precipitation data; Osservazioni pluviometriche a Milano: ricostruzione delle precipitazioni mensili

    Energy Technology Data Exchange (ETDEWEB)

    Maugeri, M. [Milan Univ. (Italy). Ist. di Fisica Generale Applicata; Buffoni, L.; Chlistovsky, F. [Osservatorio Astronomico, Brera (Italy)

    1995-05-01

    A detailed historical study on the methodologies about rain acquisition in Milan-Brera during the least 230 years is presented. The reliability of several periods of the series is described on the basis of the used methodologies and of the disponibility of original manuscripts. The monthly, yearly and seasonal corrected values of the rainfalls for the period 1764-1993 are published. Some data analysis is then presented in order both to describe the trend of yearly rainfalls and to show how the inclusion of the first period data (probably more affected by errors) modifies the principal features of Milan rainfalls. Finally a new set of normal monthly, seasonal and yearly rainfalls data is presented.

  13. Evolution of Milan microclimate in XX century. Evoluzione del microclima milanese nel corso del secolo XX

    Energy Technology Data Exchange (ETDEWEB)

    Schieroni, A. (Lombardia Risorse SpA, Milan (Italy))

    Within the framework of studies to correlate the use of fossil fuels with urban area thermal pollution, this article examines the local microclimate of Milan, describing the main features of the so-called 'heat island' phenomenon and analyzing the evolution of ambient temperatures. Two different kinds of data on urban temperatures were employed: the hourly measurements taken by the Multinational Presidium for Hygiene and Prevention, run by the Local Sanitary Unit No. 75 of Milan, in the period ranging from 1985 to 1990, and the maximum and minimum daily values referring to the period between 1909 and 1991 (data supplied by the Meteorologic Observatory of Brera-Duomo). The standard year, worked out in the framework of the C. N. R. (National Research Centre) Finalized Energy Project and referring to the meteorological station of Linate Airport, was employed in order to highlight the difference between the thermal behaviour of the urban and the extra-urban area.

  14. Treatment Algorithm for the Hypertension Specialist after the Milan Meeting in 2007

    Czech Academy of Sciences Publication Activity Database

    Peleška, Jan; Anger, Z.; Buchtela, David; Tomečková, Marie; Veselý, Arnošt; Zvárová, Jana

    2007-01-01

    Roč. 30 (2007), s. 374-374 ISSN 1420-4096. [Central European Meeting on Hypertension and Cardiovascular Disease Prevention. 11.10.2007-13.10.2007, Kraków] R&D Projects: GA AV ČR 1ET200300413 Institutional research plan: CEZ:AV0Z10300504 Keywords : hypertension specialist * treatment algorithm for the hypertension * treatment after the Milan Meeting in 2007 Subject RIV: FA - Cardiovascular Disease s incl. Cardiotharic Surgery

  15. Territorial embeddedness and virtual connections of knowledge and creative workers in Milan

    Directory of Open Access Journals (Sweden)

    Marianna d’Ovidio

    2014-04-01

    Full Text Available The paper discusses the relation between territorial embeddedness and virtual connections among knowledge and creative workers in Milan by challenging the idea that co-presence is crucial for interaction and that face-to-face (F2F relations are essential for their success. Knowledge and creative workers are thus embedded in a wider "space", that is not necessarily a physical one, but also virtual and ICT mediated.

  16. Total suspended particulates in Milan, Italy. Studi sul particolato nell'atmosfera milanese

    Energy Technology Data Exchange (ETDEWEB)

    Valentini, M.; Verderio, C.; Maugeri, M. (Milan Univ. (Italy). Ist. di Fisica Generale Applicata); Novo, A. (Ente Nazionale per l' Energia Elettrica, Milan (Italy). Centro Termica e Nucleare)

    1993-05-01

    The paper describes a group of measurements taken of the suspended particulate in the Milan atmosphere. The samples were collected on membrane filters and then analyzed using fluorescence methods. Many elements were found and quantitatively determined, from sulphur to lead. The collection of particulate, at a height of 25 meters above ground level, was made over a period of three years at the Brera Tower Air Quality Station.

  17. Ongoing large measles outbreak with nosocomial transmission in Milan, northern Italy, March-August 2017.

    Science.gov (United States)

    Amendola, Antonella; Bianchi, Silvia; Frati, Elena R; Ciceri, Giulia; Faccini, Marino; Senatore, Sabrina; Colzani, Daniela; Lamberti, Anna; Baggieri, Melissa; Cereda, Danilo; Gramegna, Maria; Nicoletti, Loredana; Magurano, Fabio; Tanzi, Elisabetta

    2017-08-17

    A large measles outbreak has been ongoing in Milan and surrounding areas. From 1 March to 30 June 2017, 203 measles cases were laboratory-confirmed (108 sporadic cases and 95 related to 47 clusters). Phylogenetic analysis revealed the co-circulation of two different genotypes, D8 and B3. Both genotypes caused nosocomial clusters in two hospitals. The rapid analysis of epidemiological and phylogenetic data allowed effective surveillance and tracking of transmission pathways. This article is copyright of The Authors, 2017.

  18. Active and passive monitoring of benzene in Milan from 1992 up to today

    International Nuclear Information System (INIS)

    Lerda, D.; Robles, P.; Astori, M.; Barletta, M.; Canzi, R.; Barilli, L.

    1999-01-01

    The air quality degradation in large urban areas, mainly due to the traffic, is evaluated through the measurement of pollutants coming, directly or indirectly, from the traffic itself. Due to its cancerogenicity, a quality standard for benzene has been settled by D.M.25/11/1994, which obliges this measure in towns having more than 150.000 inhabitants.Starting from 1992, Milan P.M.I.P. has been controlling benzene and other homologues concentrations in air with routine and campaign measurements. Concentrations change depends both on variations of fuel formulation and on the renewal of the cars fleet. As a matter of fact, the lower benzene percentage in fuels and the use of tailpipes with catalytic converter greatly reduced the emission of these compounds in air, giving an estimate annual average lower than the impose limit. In an urban area, an estimate of an average concentration starting from the three sampling points according to the low can give a value far from the real average level; to solve this problem Milan P.M.I.P. programmed an annual campaign with daily sampling in 24 sites homogeneously located in Milan territory [it

  19. Cradles of industry and occupational medicine in the modern world: Milan 1906 -- Annus Mirabilis.

    Science.gov (United States)

    Baldasseroni, A; Carnevale, F; Tomassini, L

    2013-01-01

    The example examined is Milan, Italy's main industrial city, where the great International Exhibition was held in 1906. This was the culmination of a period of accelerated industrial growth that modern-day historiography considers to be when Italy's first real industrial revolution began. The twenty-five years between the National Industrial Exhibition of 1881, which was also held in Milan, and the 1906 Exhibition truly reflected a period which was crucial for this transformation to take of. Alongside industry, which was then going through a phase of reorganization and development, Milanese civil society was increasingly turning its interest and attention to what was called the "social question". In an atmosphere of debate and exchange of ideas and experience with Turin, another major industrial city of the north and the birthplace of the Italian engineering and automobile industries, social organizations, political parties and trade unions began to be established thus heralding the Italian approach towards twentieth-century welfare. This is the context in which the first International Congress on Occupational Diseases was held in Milan from 9 to 14 June 1906 within the framework of the International Exhibition. The success achieved with this initiative. organized by Luigi Devoto and Malachia De Cristoforis, which was to continue with the founding of the International Permanent Commission on Occupational Health, showed that the time was ripe for a new subject to appear on the scene--the occupational health physician--who from then on was to play an important role in the promotion of workers' health. The article outlines the main features of the Italian industrial transformation at the turn of the new century with special attention focused on Milan, the capital of industry in Italy. It also describes the impact on public opinion caused by the events surrounding the epic construction of the transalpine railway tunnels which began in 1856 with the Mont Cenis tunnel

  20. Sur les traces de Franz Kafka dans l’œuvre de Milan Kundera // In the footsteps of Franz Kafka in the work of Milan Kundera

    Directory of Open Access Journals (Sweden)

    Lenka Žehrová

    2015-12-01

    Full Text Available Franz Kafka is undoubtebly an important part of the literary canon of the Central Europe and especially of the canon formed by Milan Kundera in his works. Kundera considers Kafka to be one of his principal masters. He sees Kafka as an antecendent of surrealism and existencialism. According to his collection of essays The Art of the Novel, Kafka is the prototype of the ideal author who invites us to cross the border of the probable showing us the world from the other side. Thus, we can observe the human existence in different and better way. By showing this, he fills up the main task of every novelist. The contribution will analyze the alludes of Kafka in the work of Kundera and will try to describe their character and explain how Kundera works with examples of Kafka and his work in his own books.

  1. The Milan Project: A New Method for High-Assurance and High-Performance Computing on Large-Scale Distributed Platforms

    National Research Council Canada - National Science Library

    Kedem, Zvi

    2000-01-01

    The MILAN project, a joint effort involving Arizona State University and New York University, has produced and validated fundamental techniques for the realization of efficient, reliable, predictable...

  2. Living like a king? The entourage of Odet de Foix, vicomte de Lautrec, governor of Milan.

    Directory of Open Access Journals (Sweden)

    Philippa Woodcock

    2015-11-01

    Full Text Available In the early sixteenth century, the de Foix family were both kin and intimate councillors to the Valois kings, Louis XII and François I. With a powerbase in Guyenne, the de Foix tried to use their connections at court to profit from the French conquest of Milan, 1499-1522. This paper will explore the career of one prominent family member, Odet de Foix, vicomte de Lautrec (1483-1528. Lautrec was a Marshal of France, who served in Italy as a soldier and governor. He was key to the royal entourage, amongst François I’s intimates at the Field of the Cloth of Gold. His sister, Françoise, was also the king’s mistress. The paper will examine Lautrec’s entourage from two aspects. Firstly, it asks how Lautrec established his entourage from his experience in Navarre and Italy and as a member of the royal retinue. It establishes the importance of familial and regional ties, but also demonstrates the important role played by men of talent. Secondly, it explores Lautrec's relationship to his entourage once governor of Milan. Were ties of blood, career or positions of Italian prestige the most important for a governor when he chose his intimates? Were compromises made with Italian traditions and elites to sustain his rule? Did he learn from the experience and failures of previous governors?  The article contributes to a gap in scholarship for the later period of French Milan from 1515-1522. It also adds to our knowledge of the behaviour and ambitions of early modern governors.

  3. The Milan System for Reporting Salivary Gland Cytopathology: Analysis and suggestions of initial survey.

    Science.gov (United States)

    Rossi, Esther Diana; Faquin, William C; Baloch, Zubair; Barkan, Güliz A; Foschini, Maria Pia; Pusztaszeri, Marc; Vielh, Philippe; Kurtycz, Daniel F I

    2017-10-01

    An international panel of experts in the field of salivary gland cytology (SGC), supported by the American Society of Cytopathology (ASC) and the International Academy of Cytology, conducted a survey to seek evidence and practice patterns regarding SGC. Results were used to provide focus for the proposed Milan System for Reporting Salivary Gland Cytopathology. The study group, formed during the 2015 European Congress of Cytology held in Milan, Italy, generated a survey that included 49 specific questions related to the taxonomies, practices, and diagnostic entities of salivary cytology. Qualtrics software was used as the study platform. Software and server support were provided by the division of information technology at the University of Wisconsin. The survey was available online from November 2015 until February 2016. Participants were invited through the Web sites of the ASC, the International Academy of Cytology, and the Papanicolaou Society of Cytopathology as well as by the ASC e-mail "ListServe"; responses were evaluated by the Milan System editors. Responses from a total of 515 participants were collected and reviewed. A total of 347 participants provided demographic data information. Responses revealed variations in diagnostic practice and subsequent management. Participants believed that the acceptable rate for nondiagnostic samples should not be higher than 10%. There were varied opinions regarding the approach to neoplastic lesions of uncertain malignant potential, those that may or may have not local invasion and distant spread. Results of the survey demonstrated strong support for the development of a unified system for reporting SGC. Cancer Cytopathol 2017;125:757-66. © 2017 American Cancer Society. © 2017 American Cancer Society.

  4. [Assessment of pesticide residues in food of plant origin in Milan (Italy), 2008-2011].

    Science.gov (United States)

    Tesauro, Marina; Cesaria, Maria Concetta; Fracchia, Simonetta; Benzoni, Massimo; Bollani, Massimiliano; Consonni, Michela; Bianchi, Annalisa

    2013-01-01

    To monitor the presence of pesticide residues in food of plant origin in Milan from 1 July 2008 to 31 December 2011. Food of plant origin found in fruit and vegetable markets and in supermarkets was analysed, to evaluate whether it was contaminated by any seventy active principles of pesticides. Two hundred seventy-seven samples of fruits and vegetables were analysed. No pesticide residues were found in 61.7% of the samples, 37.9% had residues below the maximum threshold and 0.4% had residues above the threshold. Results are satisfactory and in agreement with national and international data.

  5. West Nile Virus (WNV seroprevalence in a blood donors group of Milan

    Directory of Open Access Journals (Sweden)

    Giovanna Lunghi

    2012-09-01

    Full Text Available A seroprevalence study for anti West Nile virus was carried out among 864 healthy blood donors living in the metropolitan area of Milan by using a commercially available ELISA method. In addition, the performance of a novel ELISA assay for WNV antibodies was assessed. The sero-prevalence rate of WNV antibodies was 0.57% thus showing that WNV is likely circulating also in this up to now unknown area. The overall sensitivity and specificity of the novel ELISA were 99.9% and 45.4%, respectively, well comparable with that of the chosen reference immunoenzimatic method.

  6. Italy on the spotlight: Expo Milan 2015 and Italian Journal of Food Science

    Directory of Open Access Journals (Sweden)

    P. Fantozzi

    2015-12-01

    Full Text Available The year 2015 will certainly be remembered as the Year of the Universal Exposition (EXPO hosted in Milan, Italy, focusing on a hot theme in the current scenario: “Feeding the Planet, Energyfor Life”.This event has drawn a wide international attention towards Italy as a country with peculiar and valuable food traditions, thus strengthening its reputation as “gastronomic capital of theworld” rich in protected designation of origin products (PDOs and characterised by a longstanding food culture.

  7. Preliminary Statistics from the NASA Alphasat Beacon Receiver in Milan, Italy

    Science.gov (United States)

    Nessel, James; Zemba, Michael; Morse, Jacquelynne; Luini, Lorenzo; Riva, Carlo

    2015-01-01

    NASA Glenn Research Center (GRC) and the Politecnico di Milano (POLIMI) have initiated a joint propagation campaign within the framework of the Alphasat propagation experiment to characterize rain attenuation, scintillation, and gaseous absorption effects of the atmosphere in the 40 gigahertz band. NASA GRC has developed and installed a K/Q-band (20/40 gigahertz) beacon receiver at the POLIMI campus in Milan, Italy, which receives the 20/40 gigahertz signals broadcast from the Alphasat Aldo Paraboni TDP no. 5 beacon payload. The primary goal of these measurements is to develop a physical model to improve predictions of communications systems performance within the Q-band. Herein, we provide an overview of the design and data calibration procedure, and present 6 months of preliminary statistics of the NASA propagation terminal, which has been installed and operating in Milan since May 2014. The Q-band receiver has demonstrated a dynamic range of 40 decibels at an 8-hertz sampling rate. A weather station with an optical disdrometer is also installed to characterize rain drop size distribution for correlation with physical based models.

  8. Integrating Laser Scanner and Bim for Conservation and Reuse: "the Lyric Theatre of Milan"

    Science.gov (United States)

    Utica, G.; Pinti, L.; Guzzoni, L.; Bonelli, S.; Brizzolari, A.

    2017-12-01

    The paper underlines the importance to apply a methodology that integrates the Building Information Modeling (BIM), Work Breakdown Structure (WBS) and the Laser Scanner tool in conservation and reuse projects. As it is known, the laser scanner technology provides a survey of the building object which is more accurate rather than that carried out using traditional methodologies. Today most existing buildings present their attributes in a dispersed way, stored and collected in paper documents, in sheets of equipment information, in file folders of maintenance records. In some cases, it is difficult to find updated technical documentation and the research of reliable data can be a cost and time-consuming process. Therefore, this new survey technology, embedded with BIM systems represents a valid tool to obtain a coherent picture of the building state. The following case consists in the conservation and reuse project of Milan Lyric Theatre, started in 2013 from the collaboration between the Milan Polytechnic and the Municipality. This project first attempts to integrate these new techniques which are already professional standards in many other countries such as the US, Norway, Finland, England and so on. Concerning the methodology, the choice has been to use BIM software for the structured analysis of the project, with the aim to define a single code of communication to develop a coherent documentation according to rules in a consistent manner and in tight schedules. This process provides the definition of an effective and efficient operating method that can be applied to other projects.

  9. Binder characterisation of mortars used at different ages in the San Lorenzo church in Milan

    International Nuclear Information System (INIS)

    Bertolini, Luca; Carsana, Maddalena; Gastaldi, Matteo; Lollini, Federica; Redaelli, Elena

    2013-01-01

    The paper describes a study on the mortars of the basilica of San Lorenzo in Milan, which was carried out to support an archaeological study aimed at dating and documenting the construction techniques used throughout the centuries. The church, which was founded between the 4th and 5th century, at the end of the period when Milan was the capital of the Roman Empire, was subjected in time to extensions, collapses and reconstructions that lasted until the Renaissance period and even later on. Thanks to the good state of conservation, San Lorenzo church is a collection of materials and construction techniques throughout a period of more than a millennium. Mortars were investigated in order to compare the binders used for structural elements built in different historical ages. From an archaeological study, samples of mortars attributed to the late Roman period, the Middle Ages and the Renaissance were available. The binder of each sample was separated by the aggregates and it was characterised on the basis of X-ray diffraction analysis, thermogravimetric analysis and scanning electron microscopy. Constituents of the binder were identified and their origin is discussed in order to investigate if they could be attributed to the original composition of the binder or to possible alteration in time due to atmospheric pollution. Results show that, even though the binder is mainly based on magnesian lime, there are significant differences in the microstructure of the binding matrix used in mortars ascribed to the different historical periods. In the Roman period, in correspondence of the structural elements that required higher strength, also hydraulic cocciopesto mortars were detected. Gypsum was found in most samples, which was maybe added intentionally. - Highlights: • Binders of mortars of San Lorenzo church in Milan were investigated. • Roman, Middle Ages and Renaissance samples were studied by XRD, TG and SEM. • Magnesian-lime binders containing silico

  10. Binder characterisation of mortars used at different ages in the San Lorenzo church in Milan

    Energy Technology Data Exchange (ETDEWEB)

    Bertolini, Luca, E-mail: luca.bertolini@polimi.it; Carsana, Maddalena, E-mail: maddalena.carsana@polimi.it; Gastaldi, Matteo, E-mail: matteo.gastaldi@polimi.it; Lollini, Federica, E-mail: federica.lollini@polimi.it; Redaelli, Elena, E-mail: elena.redaelli@polimi.it

    2013-06-15

    The paper describes a study on the mortars of the basilica of San Lorenzo in Milan, which was carried out to support an archaeological study aimed at dating and documenting the construction techniques used throughout the centuries. The church, which was founded between the 4th and 5th century, at the end of the period when Milan was the capital of the Roman Empire, was subjected in time to extensions, collapses and reconstructions that lasted until the Renaissance period and even later on. Thanks to the good state of conservation, San Lorenzo church is a collection of materials and construction techniques throughout a period of more than a millennium. Mortars were investigated in order to compare the binders used for structural elements built in different historical ages. From an archaeological study, samples of mortars attributed to the late Roman period, the Middle Ages and the Renaissance were available. The binder of each sample was separated by the aggregates and it was characterised on the basis of X-ray diffraction analysis, thermogravimetric analysis and scanning electron microscopy. Constituents of the binder were identified and their origin is discussed in order to investigate if they could be attributed to the original composition of the binder or to possible alteration in time due to atmospheric pollution. Results show that, even though the binder is mainly based on magnesian lime, there are significant differences in the microstructure of the binding matrix used in mortars ascribed to the different historical periods. In the Roman period, in correspondence of the structural elements that required higher strength, also hydraulic cocciopesto mortars were detected. Gypsum was found in most samples, which was maybe added intentionally. - Highlights: • Binders of mortars of San Lorenzo church in Milan were investigated. • Roman, Middle Ages and Renaissance samples were studied by XRD, TG and SEM. • Magnesian-lime binders containing silico

  11. Organisation and Management of a Complete Bachelor Degree Offered Online at the University of Milan for Ten Years

    Science.gov (United States)

    Milani, Manuela; Papini, Sabrina; Scaccia, Daniela; Scarabottolo, Nello

    2014-01-01

    This paper is aimed at presenting some reflections on organisation and management of SSRI online: an e-learning initiative started at the University of Milan (Italy) in the academic year 2004/05 and offered to students over the last ten years. The initiative consisted in implementing the online version of an already existing three-year bachelor…

  12. Materials for the history of the Ospedale Maggiore of Milan: the Chapter resolutions of the years 1456-1498

    Directory of Open Access Journals (Sweden)

    Giuliana Albini

    2011-04-01

    Full Text Available The history of charity and assistance in Milan at the end of the Middle Ages has as basic term of reference the documentary sources of the Ospedale Maggiore, the new great hospital result of a long process of reform that took place in the course of the 15th century. The Chapter of the Ospedale Maggiore became a management centre which planned and controlled the activities of other charitable-attendance structures, the most important of them represented in the corporative administrative body of the Ospedale Maggiore itself. The Ospedale Maggiore Chapter left evidence of its meetings and decisions in more than 3000 proceedings, registered in seven records. The board resolutions of the Ospedale Maggiore of Milan are a basic source for the history of hospitals of all Lombardy. Moreover, they shed light on economic, social and political dynamics of the Duchy of Milan at the end of Quattrocento: the organization of the Ospedale Maggiore board highlights on politics and strategies of the ruling groups of Milan and of the Sforza dynasty as well. Object of this work is the edition, in the form of regestum, of the Ospedale Maggiore Chapter resolutions; a map of the country estate, land, farms, mills, of the Ospedale Maggiore, is edited too.

  13. Dr. Milan Glavinić, architect (Belgrade 1891 - Belgrade 1968: Addenda to the biography

    Directory of Open Access Journals (Sweden)

    Latinčić Olga

    2016-01-01

    Full Text Available The paper supplies further data for a biography of Milan Glavinić, such as information on his participation in the Balkan Wars and the First World War and his broad social and political activity. It also presents his published and unpublished texts on architecture, urban planning and art history, his 'Iskrice' (Sparks and his texts on old Belgrade kept in Glavinić Family Papers in the Historical Archives of Belgrade. His texts on old Belgrade are based on his own memories, the memories and stories told by his father Kosta and other people, and the surviving documents. They describe Belgrade's houses, their owners, prices, particular city districts, the Elementary School by the Cathedral, the Big Stairs, restaurants, and sketch his urban planning ideas.

  14. Blood pressure and 10-year mortality risk in the Milan Geriatrics 75+ Cohort Study

    DEFF Research Database (Denmark)

    Ogliari, Giulia; Westendorp, Rudi G J; Muller, Majon

    2015-01-01

    BACKGROUND: optimal blood pressure targets in older adults are controversial. OBJECTIVE: to investigate whether the relation of blood pressure with mortality in older adults varies by age, functional and cognitive status. DESIGN: longitudinal geriatric outpatient cohort. SETTING: Milan Geriatrics.......001 and 0.004, respectively). In patients with SBP below 180 mmHg, higher SBP was associated with lower mortality in patients with impaired ADL and MMSE but not in those with preserved ADL and/or MMSE (P for interaction 0.033). Age did not modify the correlation of SBP with mortality. CONCLUSIONS......: the correlations of SBP and DBP with mortality were U-shaped. Higher SBP is related to lower mortality in subjects with impaired ADL and MMSE. ADL and MMSE may identify older subjects who benefit from higher blood pressure....

  15. The meteor of the Neighbourhood Contracts through the case of the San Siro district in Milan

    Directory of Open Access Journals (Sweden)

    Maria Fianchini

    2012-10-01

    Full Text Available The study deals with the San Siro public housing neighbourhood in Milan, whose size and amount of issues make the district as a system in itself disjointed to the urban context. Features and conditions of this area, would require an hard work (and simultaneously offered great opportunities for researching and field-testing innovative solutions for building and social rehabilitation of the great public housing settlements, as originally outlined in the «Neighbourhood Contracts». On the contrary, funds assigned to this complex by the second competition for «Neighbourhood Contracts», doesn’t seem to have started any innovative process of intervention on built environment, but rather letting an involutional model.

  16. PAH and N-PAH in the urban atmosphere of Rome and Milan

    International Nuclear Information System (INIS)

    Cecinato, A.; Ciccioli, P.; Brancaleoni, E.; Zagari, M.

    1998-01-01

    Particulated PAH and nitrated-PAH (N-PAH) have been measured in urban areas of Rome and Milan to assess the exposure of the population to carcinogenic and mutagenic compounds. We found that the index of benz(a)pyrene equivalence of carcinogenic power and the levels of 1-nitropyrene and 2-nitro fluoranthene might represent a genotoxic risk for human health even when benz(a)pyrene does not exceed the reference levels established by Italian law. A new couple of indices (1-nitropyrene and 2-nitro fluoranthene content) is proposed to account for the risk arising from N-PAH emitted from vehicle exhaust gas or produced by photochemical reactions [it

  17. Contribution to fractal Analysis of cities : A Study of metropolitan Area of Milan

    Directory of Open Access Journals (Sweden)

    Rabino Giovanni

    2004-04-01

    Full Text Available La présentation de l'analyse fractale de l'aire métropolitaine de Milan part de la description historique de l'évolution du processus d'urbanisation de la ville, de manière à pouvoir mettre en évidence des zones précises, homogènes du point de vue historique, qui seront analysées dans la suite par le biais de la technique fractale. L'analyse fractale de la ville de Milan est menée selon trois approches : l'étude du périmètre de la ville, qui utilise la méthode de la dilatation pour extraire le périmètre et l'analyse de corrélation pour calculer sa dimension fractale ; l'étude de la surface urbanisée dans son ensemble, qui utilise l'analyse de corrélation, de dilatation et du quadrillage ; l'étude de certaines zones de la ville qui ont été décrites dans la première partie de la présentation ; les résultats sont présentés avec une attention particulière au rapport entre la valeur de la dimension fractale et le contexte urbain pour lequel elle est calculée, ainsi qu'à la comparaison des dimensions fractales des différentes zones urbaines prises en considération.

  18. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins

    Energy Technology Data Exchange (ETDEWEB)

    Cappitelli, Francesca [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)], E-mail: francesca.cappitelli@unimi.it; Principi, Pamela [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy); Pedrazzani, Roberta [Dipartimento di Ingegneria Meccanica, University of Brescia, Via Branze 38, 25123 Brescia (Italy); Toniolo, Lucia [Dipartimento di Chimica, Materiali e Ingegneria Chimica ' Giulio Natta' , Politecnico di Milano, Via Mancinelli 7, 20133 Milan (Italy); Sorlini, Claudia [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and {alpha}-, {beta}-and {gamma}-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  19. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins.

    Science.gov (United States)

    Cappitelli, Francesca; Principi, Pamela; Pedrazzani, Roberta; Toniolo, Lucia; Sorlini, Claudia

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and alpha-, beta-and gamma-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  20. Statistical methods and transport modeling to assess PCE hotspots and diffuse pollution in groundwater (Milan FUA

    Directory of Open Access Journals (Sweden)

    Loris Colombo

    2017-12-01

    Full Text Available The Italian law 152/2006 adopted the EU Water Framework Directive principles and delegated to the Regions the task of identifying areas subject to groundwater diffuse pollution. In the Lombardy Plain, the qualitative groundwater conditions are affected mainly by the presence of industries and anthropic activities. The aim of this work was to assess tetrachloroethylene (PCE diffuse pollution in the Milan Functional Urban Area (FUA, where chlorinated solvents are the main groundwater contaminants and the results of monitoring campaigns for the years 2003-2014 were collected in a dataset. For this purpose, a new methodology was implemented both in a deterministic and stochastic process. At first, hotspots were identified through Cluster Analysis (CA applied to concentration values collected in unconfined/confined aquifers (2003-14. Then, a numerical transport model was implemented to study the hotspot plume extension in reason to identify monitoring wells not affected by diffuse pollution but related to specific hotspot sources. Consequently, it was possible to erase these data from the whole initial dataset in order to have a new one containing only diffuse concentrations. Interpolating them through ordinary kriging, PCE iso-concentrations maps identified areas where values are over the Maximum Contaminant Level (1.1 μg/l, Italian Law 152/06. Considering descriptive statistics and iso-PCE concentration maps, a median PCE value estimation (10 μg/l was find as representative of PCE diffuse contamination Milan city. Moreover, a stochastic methodology was used in order to consider uncertainties due to unknown multiple-sources and environmental heterogeneity. The innovative approach gave some interesting solutions to point out areas where the contaminant mass release is higher and where high probability unknown sources can be found.

  1. Particle number and mass exposure concentrations by commuter transport modes in Milan, Italy

    Directory of Open Access Journals (Sweden)

    Senem Ozgen

    2016-03-01

    Full Text Available There is increasing awareness amongst the general public about exposure to atmospheric pollution while travelling in urban areas especially when taking active travelling modes such as walking and cycling. This study presents a comparative investigation of ultrafine particles (UFP, PM10, PM2.5, PM1 exposure levels associated with four transport modes (i.e., walking, cycling, car, and subway in the city of Milan measured by means of portable instruments. Significant differences in particle exposure between transport modes were found. The subway mode was characterized by the highest PM mass concentrations: PM10, PM2.5, PM1 subway levels were respectively about 2-4-3 times higher than those of the car and open air active modes (i.e. cycling and walking. Conversely, these latter modes displayed the highest UFP levels about 2 to 3 times higher than the subway and car modes, highlighting the influence of direct traffic emissions. The car mode (closed windows, air conditioning and air recirculation on reported the lowest PM and UFP concentration levels. In particular, the open-air/car average concentration ratio varied from about 2 for UFP up to 4 for PM1 and 6 for PM10 and PM2.5, showing differences that increase with increasing particle size. This work points out that active mode travelling in Milan city centre in summertime results in higher exposure levels than the car mode. Walkers’ and cyclists’ exposure levels is expected to be even higher during wintertime, due to the higher ambient PM and UFP concentration. Interventions intended to re-design the urban mobility should therefore include dedicated routes in order to limit their exposure to PM and UFP by increasing their distance from road traffic.

  2. The area of "Porta Vittoria” in Milan L'area “Porta Vittoria” a Milano

    Directory of Open Access Journals (Sweden)

    Fulvia Pinto

    2011-02-01

    Full Text Available The transformation of Milan, to be realized completely, needs of transport infrastructure as well as major European cities. The Rail “Passante” is a trasport infrastructure almost entirely underground and it crosses the city of Milan from north-west to south-east. The "Passante" represents the structure on which to build the urban development of the "Greater Milan" and plays a strategic role in the choice of location, facilitating the creation of an urban system integrated and competitive. The "Passante" connects the central parts of the city with suburbs that are already taking advantage of the presence of the infrastructure to renew their image. The study area was originally occupied by a station of the State Railways, now is a new station of the railway "Passante". The context of urban transformation "Porta Vittoria" is located in a central area of Milan, just beyond the first “circumvallazione”, on the connecting axis the airport of Linate. The strategic location of the area, very accessible, has determined the choice of the functions that must be kept. The regeneration is characterized by two important projects, one public and one private. The public intervention concerns the BEIC - European Library of Information and Culture, the private action relates to the new district "Porta Vittoria", with mixed-use residences, offices, malls, hotels and cinemas. The project for the European Library of Information and Culture, developed many years ago, intended to give Milan an "infrastructure" for culture considered the largest of Europe. The lack of funding has led to long interruptions and long delays in implementation. The project pays particular attention to the sustainability of the building, using energy energy-efficient systems with heat pumps (with exploiting groundwater, rather superficial in that area, solar collectors and photovoltaic panels. The hypothesis expresses the desire to create a relationship between the winning project

  3. The Proceedings of the International Conference on Numerical Ship Hydrodynamics (4th) Held in Washington, DC on 24-27 September 1985

    Science.gov (United States)

    1985-09-01

    Approximation," Second ( Englis ~h ttanslation, NACA ToftiWa Memmendurn DTNSRDC WorkshoIp on Ship Wave.Ressu Com’- 1285, May 19S0). pututions, pp. 161-118. Nov...combination of FORTRAN IV, APFORTRAN and APAL (Array The case of a restrained, infinite Processor Assembly Language ) to achieve circular cylinder has...solvers as TEACH or PHOENICS, for which the application to both internal and external flows necessitates the use of a pressure correction method and

  4. [Voluntary mediation in healthcare disputes: the experience of the "Fondazione IRCCS Istituto Nazionale dei Tumori" in Milan (Italy)].

    Science.gov (United States)

    Tereanu, Carmen; Bettega, Silvia; Regalia, Enrico; Mazza, Roberto; Greco, Margherita; Lozza, Laura; Saita, Luigi; Borreani, Claudia; Quattrocolo, Alberto

    2014-01-01

    The "Fondazione IRCCS Istituto Nazionale dei Tumori" ( National Tumour Institute) in Milan (Italy) offers mediation services aimed at restoring communication between patients and healthcare professionals, when their relationship has been altered by a conflict during the diagnosis or treatment process. A method derived from transformative mediation is used. The purpose of mediation is not to examine clinical aspects, nor to identify who is right and who is wrong. Individual sessions are often sufficient to reduce litigation.

  5. Adverse biological effects of Milan urban PM looking for suitable molecular markers of exposure

    Directory of Open Access Journals (Sweden)

    Mantecca Paride

    2012-01-01

    Full Text Available The results presented summarise the ones obtained in the coordinated research project Tosca, which extensively analysed the impact of Milan urban PM on human health. The molecular markers of exposure and effects of seasonally and size-fractionated PMs (summer and winter PM10, PM2.5 were investigated in in vitro (human lung cell lines and in vivo (mice systems. The results obtained by the analyses of cytotoxic, pro-inflammatory and genotoxic parameters demonstrate that the biological responses are strongly dependent upon the PM samples seasonal and dimensional variability, that ultimately reflect their chemical composition and source. In fact summer PM10, enriched in crustal elements and endotoxins, was the most cytotoxic and pro-inflammatory fraction, while fine winter PMs induced genotoxic effects and xenobiotic metabolizing enzymes (like CYP1B1 production, likely as a consequence of the higher content in combustion derived particles reach in PAHs and heavy toxic metals. These outcomes outline the need of a detailed knowledge of the PMs physico-chemical composition on a local scale, coupled with the biological hazard directly associated to PM exposure. Apparently this is the only way allowing scientists and police-makers to establish the proper relationships between the respirable PM quantity/quality and the health outcomes described by clinicians and epidemiologists.

  6. Aerosol removal due to precipitation and wind forcings in Milan urban area

    Science.gov (United States)

    Cugerone, Katia; De Michele, Carlo; Ghezzi, Antonio; Gianelle, Vorne

    2018-01-01

    Air pollution represents a critical issue in Milan urban area (Northern Italy). Here, the levels of fine particles increase, overcoming the legal limits, mostly in wintertime, due to favourable calm weather conditions and large heating and vehicular traffic emissions. The main goal of this work is to quantify the aerosol removal effect due to precipitation at the ground. At first, the scavenging coefficients have been calculated for aerosol particles with diameter between 0.25 and 3 μm. The average values of this coefficient vary between 2 ×10-5 and 5 ×10-5 s-1. Then, the aerosol removal induced separately by precipitation and wind have been compared through the introduction of a removal index. As a matter of fact, while precipitation leads to a proper wet scavenging of the particles from the atmosphere, high wind speeds cause enhanced particle dispersion and dilution, that locally bring to a tangible decrease of aerosol particles' number. The removal triggered by these two forcings showed comparable average values, but different trends. The removal efficiency of precipitation lightly increases with the increase of particle diameters and vice versa happens with strong winds.

  7. Corrosion assessment of reinforced concrete elements of Torre Velasca in Milan

    Directory of Open Access Journals (Sweden)

    Federica Lollini

    2016-06-01

    Full Text Available An assessment of corrosion conditions, aimed at the detection of the most suitable intervention method, of the reinforced concrete elements of Torre Velasca, which, from the late 1950s, characterises the skyline of the city centre of Milan, was carried out. The facades of the Tower are marked by the presence of structural elements coated with thick and dense layers of render and mortar. In-situ and laboratory analyses showed that the high thickness and compactness of the coating played a positive role in preventing the propagation of carbonation and of corrosion. It was estimated that after 50 years most rebars embedded in concrete were either still passive or free from actively-propagating corrosion. Hence it was concluded that most of the original concrete and coating could be preserved without further protection. However, this repair strategy could be compromised by the risk of loss of adhesion of the coating to the underlying concrete, and this crucial aspect should be better investigated in the design of the repair work.

  8. Computer aided instruction. Preliminary experience in the Radiological Sciences Institute of the University of Milan

    International Nuclear Information System (INIS)

    Gardani, G.; Bertoli, M.A.; Bellomi, M.

    1987-01-01

    Computerised instruction means teaching by computer using a program that alternates information with self-checking multiple choice questions. This system was used to create a fully computerized lesson on the diagnosis and treatment of breast cancer which was then tested on a small group of madical students attending the Radiology School of the Milan University Institute of Radiological Sciences. At the end of the test, the students were asked to complete a questionnaire which was then analysed. The computer lesson consisted of 66 text messages and 21 self-checking questions. It aroused considerable interest, though the most common reason was curiosity about a novel system. The degree of fatigue caused was modest despite the fact that the computer lesson was at least as demanding as a traditional lesson, if not more so. The level of learning was considered high and optimised by the use of self-checking questions that were considered an essential element. However no student agreed to sit an official examination, even interactively, using the computer

  9. Surveillance of Mosquitoes and Selected Arthropod-Borne Viruses in the Context of Milan EXPO 2015

    Directory of Open Access Journals (Sweden)

    Mario Chiari

    2016-07-01

    Full Text Available From 1 May 2015 to 31 October 2015 over 20 million visitors from all over the world visited the Universal Exhibition (EXPO hosted by Milan (Lombardy region, Italy, raising concerns about the possible introduction of mosquito-borne diseases from endemic countries. The entomological surveillance protocol performed in Lombardy over the last three years was implemented in the EXPO area and in the two major regional airports using both Center for Disease Control CO2 and Biogents Sentinel traps. This surveillance aimed to estimate the presence and densities of putative vectors, and also to support investigations, including the vector species involved and area of diffusion, on the local spread of Chikungunya, Dengue and West Nile viruses (WNV by competent vectors. From 3544 mosquitoes belonging to five different species, 28 pools of Culex spp. and 45 pools of Aedes spp. were screened for the presence of WNV, and for both Chikungunya and flaviviruses, respectively. The entomological surveillance highlighted a low density of potential vectors in the surveyed areas and did not reveal the presence of Chikungunya or Dengue viruses in the local competent vectors inside the EXPO area or in the two airports. In addition, the surveillance reported a low density of Culex spp. mosquitoes, which all tested negative for WNV.

  10. Monitoring emerging contaminants in the drinking water of Milan and assessment of the human risk.

    Science.gov (United States)

    Riva, Francesco; Castiglioni, Sara; Fattore, Elena; Manenti, Angela; Davoli, Enrico; Zuccato, Ettore

    2018-01-16

    Emerging Contaminants (ECs) are ubiquitous in waters, arousing concern because of their potential risks for human health and the environment. This study investigated the presence of multiple classes of ECs in 21 wells over the drinking water network of Milan, in the most inhabited and industrialized area of Italy, and assessed the risks for consumers. Samples were analyzed using liquid chromatography coupled to mass spectrometry. Human risk assessment (HRA) was conducted by comparing the measured concentrations with drinking water thresholds from guidelines or calculated in this study; first considering the exposure to each single EC and then the entire mixture. Thirteen ECs were measured in the low ng/L range, and were generally detected in less than half of the wells. Pharmaceuticals, perfluorinated substances, personal care products, and anthropogenic markers were the most frequently detected. The results of the HRA excluded any risks for consumers in each scenario considered. This is one of the most comprehensive studies assessing the presence of a large number of ECs in the whole drinking water network of a city, and the risks for human health. Results improve the limited information on ECs sources and occurrence in drinking water and help establishing guidelines for regulatory purposes. Copyright © 2018 Elsevier GmbH. All rights reserved.

  11. Entre o passado e o presente do romance moderno: o humor na escrita de Milan Kundera

    Directory of Open Access Journals (Sweden)

    Wilton Barroso Filho

    2015-07-01

    Full Text Available Resumo: Enquanto pensador da criação estético-romanesca, Milan Kundera assegura que, para refletir acerca da “Arte do Romance” e aquilo que dela se extrai como conhecimento é indispensável procurar entendê-la a partir de dentro de sua própria história; e para ele, quem começou a puxar os fios que teceriam essa história ao longo da modernidade fora o século XVI com François Rabelais. Sendo assim, procurando interpolar o passado ao presente do romance moderno, o humor kunderiano dialoga com a gaiatice do riso rabelaisiano. Entender em que medida esse diálogo permite ao romancista contemporâneo questionar as estruturas sociais bem como a autonomia da criação estética frente ao mundo dominado pela ditadura do idílio, constitui-se no objetivo central desse artigo.

  12. PAH and N-PAH in the urban atmosphere of Rome and Milan

    Energy Technology Data Exchange (ETDEWEB)

    Cecinato, A.; Ciccioli, P.; Brancaleoni, E.; Zagari, M. [CNR, Monterotondo Scalo, Rome (Italy). Ist. sull`Inquinamento Atmosferico

    1998-05-01

    Particulated PAH and nitrated-PAH (N-PAH) have been measured in urban areas of Rome and Milan to assess the exposure of the population to carcinogenic and mutagenic compounds. We found that the index of benz(a)pyrene equivalence of carcinogenic power and the levels of 1-nitropyrene and 2-nitro fluoranthene might represent a genotoxic risk for human health even when benz(a)pyrene does not exceed the reference levels established by Italian law. A new couple of indices (1-nitropyrene and 2-nitro fluoranthene content) is proposed to account for the risk arising from N-PAH emitted from vehicle exhaust gas or produced by photochemical reactions. [Italiano] I PAH e i N-PAH particellari sono stati misurati nelle aree urbane di Milano e Roma per valutare l`esposizione delle popolazioni a specie cancerogeniche e mutageniche. I risultati indicano che l`indice di equivalenza di potere cancerogeno riferita al benz(a)pirene ed i livelli di 1-nitropirene e 2-nitrofluorantene possono rappresentare un rischio genotossico per la salute umana anche quando il benz(a)pirene non supera i livelli di riferimento stabiliti dal Ministero dell`Ambiente. E` proposta l`assunzione di una nuova coppia di indici (contenuto di 1-nitropirene e 2-nitrofluorantene) per valutare la mutagenicita` associata alle emissioni autoveicolari o alla reattivita` fotochimica.

  13. Suicide Risk and the Economic Crisis: An Exploratory Analysis of the Case of Milan.

    Science.gov (United States)

    Merzagora, Isabella; Mugellini, Giulia; Amadasi, Alberto; Travaini, Guido

    2016-01-01

    In the past five years, several scientific articles have claimed that the increase some countries have registered in suicide rates since 2008 is somehow related to the economic crisis. Other research has suggested that the impact of specific economic problems on the probability of suicidal behavior is often mediated by other individual-level factors, mainly psychological and physical, whose negative influence is exacerbated by reductions in the availability of health and social care during an economic crisis. On the basis of almost 1,000 cases of suicide collected by the Institute of Forensic Medicine in the province of Milan, this article aims at testing whether suicidal probability during an economic crisis is influenced by the interaction between an individual's employment status and the presence of psychological or physical disease. Using a binary logistic regression model, this article demonstrates that the likelihood of suicide during an economic crisis is three times higher for persons affected by a severe disease, either physical or psychological, than for people who are not affected (OR = 3.156; 95% CI = 1.066-9.339; p = 0.38). Neither employment status nor the interaction between employment status and health status contributed to the difference between the suicide rate before and during the economic crisis.

  14. Hourly composition of gas and particle phase pollutants at a central urban background site in Milan, Italy

    Science.gov (United States)

    Bigi, A.; Bianchi, F.; De Gennaro, G.; Di Gilio, A.; Fermo, P.; Ghermandi, G.; Prévôt, A. S. H.; Urbani, M.; Valli, G.; Vecchi, R.; Piazzalunga, A.

    2017-04-01

    A comprehensive range of gas and particle phase pollutants were sampled at 1-hour time resolution in urban background Milan during summer 2012. Measurements include several soluble inorganic aerosols (Cl-, NO2-, NO3-, SO42-, Ca2+, K+, Mg2+, Na+, NH4+) and gases (HCl, HNO2,HNO3, NH3, NO, NO2,O3, SO2), organic, elemental and black carbon and meteorological parameters. Analysis methods used include mean diurnal pattern on weekdays and Sundays, pollution roses, bivariate polar plots and statistical models using backtrajectories. Results show how nitrous acid (HONO) was mainly formed heterogeneously at nighttime, with a dependence of its formation rate on NO2 consistent with observations during the last HONO campaign in Milan in summer 1998, although since 1998 a drop in HONO levels occurred following to the decrease of its precursors. Nitrate showed two main formation mechanisms: one occurring through N2O5 at nighttime and leading to nitrate formation onto existing particles; another occurring both daytime and nighttime following the homogeneous reaction of ammonia gas with nitric acid gas. Air masses reaching Milan influenced nitrate formation depending on their content in ammonia and the timing of arrival. Notwithstanding the low level of SO2 in Milan, its peaks were associated to point source emissions in the Po valley or shipping and power plant emissions SW of Milan, beyond the Apennines. A distinctive pattern for HCl was observed, featured by an afternoon peak and a morning minimum, and best correlated to atmospheric temperature, although it was not possible to identify any specific source. The ratio of primary-dominated organic carbon and elemental carbon on hourly PM2.5 resulted 1.7. Black carbon was highly correlated to elemental carbon and the average mass absorption coefficient resulted MAC = 13.8 ± 0.2 m2 g-1. It is noteworthy how air quality for a large metropolitan area, in a confined valley and under enduring atmospheric stability, is nonetheless

  15. Assessing Natural Background Levels of aquifers in the Metropolitan Area of Milan (Lombardy)

    Science.gov (United States)

    De Caro, Mattia; Crosta, Giovanni; Frattini, Paolo

    2016-04-01

    The European Water Framework Directive (WFD 2000/60/CE) requires Member States to evaluate the status of groundwater bodies in order to reach a good water quality for human consumption. One of the preliminary steps for defining the status of groundwater bodies consists in the definition and evaluation of the so-called Natural Background Levels (NBL). The NBL or Baseline level can be defined as "the range of concentration of a given element, isotope or chemical compound in solution, derived entirely from natural, geological, biological or atmospheric sources, under conditions not perturbed by anthropogenic activity" (Edmund and Shand, 2009). The qualitative analysis for a large area (ca 4500 Km2) of the Po Plain around the Milan Metropolitan area (Lombardy, Italy) is presented in this study. Despite the aquifers in the Milan metropolitan area are an incredible groundwater resource for a very large population (3.195.629 inhabitants in the metropolitan area, data at November 2014) and a highly industrialized area, a groundwater baseline characterization is still missing. In order to attain the hydro-geochemical characterization a complete geodatabase was built (120.655 chemical samples from 1980 to 2014). This database has been explored by classical and multivariate statistical analyses to provide relationships among the more influential lithological, hydrogeological and hydro-chemical variables. Finally, the NBLs of different chemical species which may be anthropogenic sensitive (Na, Cl, K, NO3, SO4, NH4, As, Fe, Cr, Fe, Mn, Zn) and for multiple aquifer bodies (phreatic, semi-confined and confined aquifer) are evaluated. Two different approaches are applied: the Pre-Selection method (BRIDGE, 2006) and the Component-Separation method. The first one (PS) consists in the exclusion of samples from the available dataset that could indicate human activities then deriving the NBL as the 90th percentile of the remaining data. The second one (CS) consists in the fitting of

  16. [Hygienic profile of the water in Milan swimming pools: a three-year comparative study].

    Science.gov (United States)

    Tesauro, M; Bianchi, A; Consonni, M; Bollani, M; Cesaria, M; Trolli, F Radice; Galli, M G

    2010-01-01

    The aim of this work was to determine whether swimming pool water quality in Milan from 2006 to 2008 was within the standards established by national and local Italian laws (Circolare Min. Sanità 128/71 and DGR 2552/2006). In 2006, 580 samples of water from public swimming pools were analyzed to determine the presence of heterotrophic counts at 37 degrees and total coliforms; pH, free chlorine and chloride of each sample were also measured. In the following years, water from both public and private swimming pools were examined to measure heterotrophic count at 22 degrees and 36 degrees, Escherichia coli, enterococci, Pseudomonas aeruginosa, Staphylococcus aureus, pH, free chlorine, and nitrates. The total number of analyses carried out in 2007 and 2008 was 2074 and 1532, respectively. In 2006, the extent of noncompliance of all swimming pools that was observed for both physical/chemical and microbiological parameters was 72.3%, which then decreased to 53.2% and 36.2% in 2007 and 2008, respectively. In particular with regard to the microbiological analysis, an increase of noncompliance based on at least one parameter was determined (7.1% in 2006 vs. 21.5% in 2007 and 22% in 2008). In contrast, a decrease of the extent of noncompliance based on at least one physical/chemical parameter was observed (from 68.1% in 2006 to 40.4% and 22.3% in 2007 and 2008, respectively). Interestingly, public swimming pools exceeded the legal limits of microbiological concentration more often than the private ones, whereas both types of swimming pools showed a decrease in noncompliance with regard to the physical/chemical parameters.

  17. Pelvic exenteration: ten-year experience at the European Institute of Oncology in Milan.

    Science.gov (United States)

    Maggioni, Angelo; Roviglione, Giovanni; Landoni, Fabio; Zanagnolo, Vanna; Peiretti, Michele; Colombo, Nicoletta; Bocciolone, Luca; Biffi, Roberto; Minig, Lucas; Morrow, C Paul

    2009-07-01

    Analyze morbidity and survival after pelvic exenteration (PE) of gynecological malignancies. We reviewed 106 consecutive patients with gynecologic malignancies who underwent PE from June 1996 to April 2007 at the Division of Gynecology, European Institute of Oncology (IEO), Milan. PE was performed for cancer of the cervix (62 patients), vagina (21 patients), vulva (9 patients), endometrium (9 patients), ovary (4 patients) and 1 uterine sarcoma. Mean age was 53.6 (30-78) years. 97% of the patients received radiotherapy before PE and 3 patients had PE as primary treatment. We performed 53 anterior, 48 total and 5 posterior PE. Median operation time, estimated blood loss and hospital stay were respectively 490 (200-780) minutes, 1240 (300-6500) ml and 21.6 (11-55) days. No residual tumor was left in 93% of the patients. Median follow-up was 22.3 (1.6-117) months. There were no post-operative deaths (<30 days from surgery) nor intra-operative mortality. Total morbidity rate was 66%; 48% of patients had early complications (<30 days after PE) whereas 52 patients (48.5%) had late complications; 70% of these occurred to the urinary tract and 25% were due to bowel occlusions or fistulas. Overall survival was 52%, 35%, 19% and 16% respectively for cervical, endometrial, vaginal and vulvar cancer. PE is a feasible technique with no post-operative mortality and high percentage of long-survivors, although the morbidity rate still remains significantly high. Careful patient selection, pre- and post-operative care and optimal surgical skills in a Gynecologic Oncologic Center are the cornerstones to further improve quality of life and survival for these patients.

  18. Milan PM1 induces adverse effects on mice lungs and cardiovascular system.

    Science.gov (United States)

    Farina, Francesca; Sancini, Giulio; Longhin, Eleonora; Mantecca, Paride; Camatini, Marina; Palestini, Paola

    2013-01-01

    Recent studies have suggested a link between inhaled particulate matter (PM) exposure and increased mortality and morbidity associated with cardiorespiratory diseases. Since the response to PM1 has not yet been deeply investigated, its impact on mice lungs and cardiovascular system is here examined. A repeated exposure to Milan PM1 was performed on BALB/c mice. The bronchoalveolar lavage fluid (BALf) and the lung parenchyma were screened for markers of inflammation (cell counts, tumor necrosis factor-α (TNF-α); macrophage inflammatory protein-2 (MIP-2); heme oxygenase-1 (HO-1); nuclear factor kappa-light-chain-enhancer of activated B cells p50 subunit (NFκB-p50); inducible nitric oxide synthetase (iNOS); endothelial-selectin (E-selectin)), cytotoxicity (lactate dehydrogenase (LDH); alkaline phosphatase (ALP); heat shock protein 70 (Hsp70); caspase-8-p18), and a putative pro-carcinogenic marker (cytochrome 1B1 (Cyp1B1)). Heart tissue was tested for HO-1, caspase-8-p18, NFκB-p50, iNOS, E-selectin, and myeloperoxidase (MPO); plasma was screened for markers of platelet activation and clot formation (soluble platelet-selectin (sP-selectin); fibrinogen; plasminogen activator inhibitor 1 (PAI-1)). PM1 triggers inflammation and cytotoxicity in lungs. A similar cytotoxic effect was observed on heart tissues, while plasma analyses suggest blood-endothelium interface activation. These data highlight the importance of lung inflammation in mediating adverse cardiovascular events following increase in ambient PM1 levels, providing evidences of a positive correlation between PM1 exposure and cardiovascular morbidity.

  19. Milan PM1 Induces Adverse Effects on Mice Lungs and Cardiovascular System

    Directory of Open Access Journals (Sweden)

    Francesca Farina

    2013-01-01

    Full Text Available Recent studies have suggested a link between inhaled particulate matter (PM exposure and increased mortality and morbidity associated with cardiorespiratory diseases. Since the response to PM1 has not yet been deeply investigated, its impact on mice lungs and cardiovascular system is here examined. A repeated exposure to Milan PM1 was performed on BALB/c mice. The bronchoalveolar lavage fluid (BALf and the lung parenchyma were screened for markers of inflammation (cell counts, tumor necrosis factor-α (TNF-α; macrophage inflammatory protein-2 (MIP-2; heme oxygenase-1 (HO-1; nuclear factor kappa-light-chain-enhancer of activated B cells p50 subunit (NFκB-p50; inducible nitric oxide synthetase (iNOS; endothelial-selectin (E-selectin, cytotoxicity (lactate dehydrogenase (LDH; alkaline phosphatase (ALP; heat shock protein 70 (Hsp70; caspase-8-p18, and a putative pro-carcinogenic marker (cytochrome 1B1 (Cyp1B1. Heart tissue was tested for HO-1, caspase-8-p18, NFκB-p50, iNOS, E-selectin, and myeloperoxidase (MPO; plasma was screened for markers of platelet activation and clot formation (soluble platelet-selectin (sP-selectin; fibrinogen; plasminogen activator inhibitor 1 (PAI-1. PM1 triggers inflammation and cytotoxicity in lungs. A similar cytotoxic effect was observed on heart tissues, while plasma analyses suggest blood-endothelium interface activation. These data highlight the importance of lung inflammation in mediating adverse cardiovascular events following increase in ambient PM1 levels, providing evidences of a positive correlation between PM1 exposure and cardiovascular morbidity.

  20. a Comprehensive Study of the Milan Urban Plume: Gas Phase, Aerosols and ROG/NOx-SENSITIVITY

    Science.gov (United States)

    Dommen, J.; Bärtsch-Ritter, N.; Andreani-Aksoyoglu, S.; Keller, J.; Prevot, A. S. H.

    2003-04-01

    Three-dimensional photochemical models were used to investigate the temporal and spatial dynamics of the photooxidant and aerosol production in the highly polluted Milan area (Italy). A simulation of the 13 May, 1998 event is presented, when peak ozone levels of 190 ppb were measured in the urban plume. The model base case is able to reproduce the ozone concentration in the center of the plume but more peroxide is formed than in the adjacent areas in contradiction to observation. This can be interpreted as a tendency of the model towards a stronger NOx sensitivity compared to observation. The emission inventory was modified based on experimental evidence. Ozone levels did not differ much between the base case simulation and those with a modified emission inventory, while peroxide formation and NOx concentrations in the urban plume did. That lead to a better agreement with measurements. Based on this measurement-model comparison we studied the ROG/NOx sensitivity of the ozone production in this area. We also investigated the effects of various meteorological conditions and the resolution of the emission inventory on the ozone mixing ratio and the ROG/NOx sensitivity. It was found, that the net ozone formation in northern Italy depends stronger on temperature than humidity, while the humidity is more important for the ROG/NOx sensitivity of the ozone production. NOx sensitive areas increase only if much coarser emission inventories were used. Higher wind speeds increased ROG sensitive areas. The influence of strong point emission source was also investigated. The study was then extended to the calculation of secondary aerosol species such as particulate nitrate, ammonium, sulfate, and SOC (secondary organic carbon) for the particle sizes below 2.5 µm. The comparison between model results and observations will be presented and discussed.

  1. From groundwater baselines to numerical groundwater flow modelling for the Milan metropolitan area

    Science.gov (United States)

    Crosta, Giovanni B.; Frattini, Paolo; Peretti, Lidia; Villa, Federica; Gorla, Maurizio

    2015-04-01

    Contamination of major aquifers in highly densely populated areas is a major concern for stakeholders involved in the use and protection of groundwater resources. Sustainable groundwater withdrawal and management, and the identification of trends in groundwater contamination require a careful hydrochemical baseline characterization. This characterization is fundamental to investigate the presence and evolutionary trend of contaminants. In fact, it allows recovering and understanding: the spatial-temporal trend of contamination; the relative age of the contamination episodes; the reasons for anomalous behavior of some compounds during migration to and in the groundwater; the associations with which some contaminants can be found; the different behaviors in phreatic and semi-confined and confined aquifers. To attain such a characterization for the Milan metropolitan area (about 2,500 km2, ca 4.000.000 inhabitants, Lombardy, Italy), we carried out three main activities. (1) Collection of complete and reliable datasets concerning the geological, hydrogeological and hydrochemical (over 60,000 chemical analysis since 2003 to 2013) characteristics of the area and of the involved aquifers. This activity was very demanding because the available data are provided by different authorities (Lombardy Region, Provinces, Lombardy Environmental Agency - ARPA Lombardia, public own companies in charge of water system managements) in raw format and with different database standard, which required a large effort of manual verification and harmonization. (2) Completion of a hydrochemical characterization of the metropolitan area aquifers by classical statistical and multivariate statistical analyses, in order to define a baseline both for some major physical chemical characteristics and for the most relevant contaminants. (3) Development of a three dimensional hydrogeological model for the metropolitan area starting from the above listed datasets and existing models. This model will

  2. The medical malpractice in Milan-Italy. A retrospective survey on 14 years of judicial autopsies.

    Science.gov (United States)

    Casali, Michelangelo Bruno; Mobilia, Francesca; Sordo, Sara Del; Blandino, Alberto; Genovese, Umberto

    2014-09-01

    The medical malpractice is a rising and central topic for the forensic pathologist and forensic autopsies are a mandatory step in the judicial evaluation of the suspected medical malpractice. Reliable national and international registers about the medical malpractice are still missing and nowadays the necroscopic archives are therefore one of the best sources of data about such a complex phenomenon. We analyzed the archive of the Institute of Forensic Medicine of the Milan University from 1996 to 2009 and selected 317 lethal cases of suspected medical malpractice. The mean age of our cases was 60±18 years for males and 58±19 years for the females. In 70% of such cases the patient death occurred in a hospital setting. The first 24h of hospitalization turned out to be the hottest period for deaths followed by malpractice claims. The surgical branches were obviously the most involved, with abdominal surgery, orthopedics, neurosurgery and gynecology as the main contributors. Just 12% of the total amount of cases came from all the internistic branches put together. Non-hospital malpractice was typically caused by misdiagnosed myocardial infarctions and aortic ruptures. A full forensic report was present in 71 cases (all belonging to the 2007-2009 period): in 69% of cases the judicial autopsy revealed as a sufficient tool for diagnosing the cause of death; medical malpractice was confirmed in only 17% of the whole cases and a causal link between the ascertained malpractice and the patient death was recognized in only 12.7% cases. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  3. Hydrogeochemical characterization and Natural Background Levels in urbanized areas: Milan Metropolitan area (Northern Italy)

    Science.gov (United States)

    De Caro, Mattia; Crosta, Giovanni B.; Frattini, Paolo

    2017-04-01

    Although aquifers in densely populated and industrialized areas are extremely valuable and sensitive to contamination, an estimate of the groundwater quality status relative to baseline conditions is lacking for many of them. This paper provides a hydrogeochemical characterization of the groundwater in the Milan metropolitan area, one of the most densely populated areas in Europe. First, a conceptual model of the study area based on the analysis of the spatial distribution of natural chemical species and indicator contaminants is presented. The hydrochemical facies of the study area depend on the lithology of catchments drained by the main contributing rivers and on the aquifer settings. The anthropogenic influence on the groundwater quality of superficial aquifers is studied by means of probability plots, concentration versus depth plots and spatial-temporal plots for nitrate, sulfate and chloride. These allow differentiation of contaminated superficial aquifers from deep confined aquifers with baseline water quality. Natural Background Levels (NBL) of selected species (Cl, Na, NH4, SO4, NO3, As, Fe, Mn and Zn) are estimated by means of the pre-selection (PS) and the component separation (CS) statistical approaches. The NBLs depend on hydrogeological settings of the study area; sodium, chloride, sulfate and zinc NBL values never exceed the environmental water quality standards. NBL values of ammonium, iron, arsenic and manganese exceed the environmental water quality standards in the anaerobic portion of the aquifers. On the basis of observations, a set of criteria and precautions are suggested for adoption with both PS and CS methods in the aquifer characterization of highly urbanized areas.

  4. Seasonal variations in chemical composition and in vitro biological effects of fine PM from Milan.

    Science.gov (United States)

    Perrone, Maria Grazia; Gualtieri, Maurizio; Ferrero, Luca; Lo Porto, Claudia; Udisti, Roberto; Bolzacchini, Ezio; Camatini, Marina

    2010-03-01

    Fine particulate matter (PM1 and PM2.5) was collected in Milan over the summer (August-September) and winter (January-March) seasons of 2007/2008. Particles were analyzed for their chemical composition (inorganic ions, elements and PAHs) and the effects produced on the human lung carcinoma epithelial cell line A549. In vitro tests were performed to assess cell viability with MTT assay, cytokine release (IL-6 and IL-8) with ELISA, and DNA damage with COMET assay. Results were investigated by bivariate analysis and multivariate data analysis (Principal Component Analysis, PCA) to investigate the relationship between PM chemical composition and the biological effects produced by cell exposure to 12 microg cm(-2). The different seasonal chemical composition of PM showed to influence some biological properties. Summer PM samples had a high mass contribution of SO(4)(=) (13+/-2%) and were enriched in some elements, like Al, As, Cr, Cu, and Zn, compared to winter PM samples. Cell viability reduction was two times higher for summer PM samples in comparison with winter ones (27+/-5% and 14+/-5%, respectively), and the highest correlation coefficients between cell viability reduction and single chemical components were with As (R(2)=0.57) and SO(4)(=) (R(2)=0.47). PM1 affected cell viability reduction and induced IL-8 release, and these events were interrelated (R(2)=0.95), and apparently connected with the same chemical compounds. PM2.5 fraction, which was enriched in Ca(++) and Mg(++) (from soil dust), and Al, Fe, Zn, Ba Mn, produced cell viability reduction and DNA damage (R(2)=0.73). Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  5. Expansion of the Milan criteria without any sacrifice: combination of the Hangzhou criteria with the pre-transplant platelet-to-lymphocyte ratio.

    Science.gov (United States)

    Xia, Weiliang; Ke, Qinghong; Guo, Hua; Wang, Weilin; Zhang, Min; Shen, Yan; Wu, Jian; Xu, Xiao; Yan, Sheng; Yu, Jun; Zhang, Mangli; Zheng, Shusen

    2017-01-05

    The Hangzhou criteria expand the Milan criteria safely and effectively in selecting hepatocellular carcinoma (HCC) candidates for liver transplantation (LT), but some patients exceeding the Milan but fulfilling the Hangzhou criteria still show poor outcomes due to early tumor recurrence. In this study, the platelet-to-lymphocyte ratio (PLR) was employed to differentiate high-risk tumor recurrence recipients, and a new method combining PLR and the Hangzhou criteria was established. The clinical data of 343 LT for HCC were retrospectively analyzed. Receiver operating characteristic (ROC) analysis was used to determine the PLR cut-off value to stratify patients exceeding the Milan but fulfilling the Hangzhou criteria. The recurrence-free survival (RFS) of recipients was compared after stratification. The Hangzhou criteria & PLR method was proposed and its feasibility was validated by ROC analysis. PLR 120 was the most significant cut-off value when comparing RFS of patients exceeding the Milan but fulfilling the Hangzhou criteria. After stratification, the 1-, 3-, and 5-year RFS of patients exceeding the Milan but fulfilling the Hangzhou criteria with PLR sacrifice.

  6. The fate of the postmodern world: On melancholy and rebellion by Milan Mihajlović

    Directory of Open Access Journals (Sweden)

    Vuksanović Ivana

    2016-01-01

    Full Text Available The musical oeuvre of Milan Mihajlović (b. 1945 enjoys a high reputation and position in contemporary Serbian music. This has been proven by the many awards he has received, countless performances of his compositions at home and abroad, and especially by the warm and approving reactions of the audience. The stylistic consistency in his oeuvre is a result of his creative use of Scriabin’s scale. The concept of this scale was first theoretically elaborated in an extensive study written by Mihajlović in 1980 and, since then the scale has been functioning as a crucial cohesive element in all Mihajlović’s compositions. The novelty in his oeuvre, composed during the 1990s, were intertextual references made by using citations from his own works and those of other composers (Monteverdi, Mozart, Stravinsky, Rachmaninov, Vasilije Mokranjac. The most characteristic features of his mature style are also recognizable in his recent works Melancholy (2014 and Rebellion (2015. The interval structure of Skriabin’s scale is projected along the horizontal (melodical and vertical (harmonical axes of the both works while the formal design resulted from shifts of tensions and relaxations. Developmental sections are based on variation and improvisation of the small number of different motifs (three basic ones in Melancholy, four in Rebellion above the metrically moveable ostinato layers and the releases are marked by change of tempo, dynamic, meter and texture. The most significant and radical release is the one which marks the abrupt ending of Rebellion by the physical gesture of slamming down the keyboard lid. As the composition was written for the BUNT festival (Belgrade it fits the festival’s idea of expressing resistance to the government’s neglect of academic musicians and institutions. In the wider sense, it becomes a sign of the resistance to the world we live in, and that is the world of lost ideals. Both works are composed for the wind

  7. Asbestos Lung Burden in Necroscopic Samples from the General Population of Milan, Italy.

    Science.gov (United States)

    Casali, Michelangelo; Carugno, Michele; Cattaneo, Andrea; Consonni, Dario; Mensi, Carolina; Genovese, Umberto; Cavallo, Domenico Maria; Somigliana, Anna; Pesatori, Angela Cecilia

    2015-08-01

    The present study analysed the asbestos lung burden in necroscopic samples from 55 subjects free from asbestos-related diseases, collected between 2009 and 2011 in Milan, Italy. Multiple lung samples were analysed by light microscopy (asbestos bodies, AB) and EDXA-scanning electron microscopy (asbestos fibres and other inorganic fibres). Asbestos fibres were detected in 35 (63.6%) subjects, with a higher frequency for amphiboles than for chrysotile. Commercial (CA) and non-commercial amphiboles (NCA) were found in roughly similar frequencies. The estimated median value was 0.11 million fibres per gram of dry lung tissue (mf g(-1)) for all asbestos, 0.09 mf g(-1) for amphiboles. In 44 (80.0%) subjects no chrysotile fibres were detected. A negative relationship between asbestos mass-weighted fibre count and year of birth (and a corresponding positive increase with age) was observed for amphiboles [-4.15%, 95% confidence interval (CI) = -5.89 to -2.37], talc (-2.12%, 95% CI = -3.94 to -0.28), and Ti-rich fibres (-3.10%, 95% CI = -5.54 to -0.60), but not for chrysotile (-2.84%, 95% CI = -7.69 to 2.27). Residential district, birthplace, and smoking habit did not affect the lung burden of asbestos or inorganic fibres. Females showed higher burden only for amphiboles (0.12 versus 0.03 mf g(-1) in males, P = 0.07) and talc fibres (0.14 versus 0 mf g(-1) in males, P = 0.03). Chrysotile fibres were shorter and thinner than amphibole fibres and NCA fibres were thicker than CA ones. The AB prevalence was 16.4% (nine subjects) with concentrations ranging from 10 to 110 AB g(-1) dry, well below the 1000 AB g(-1) threshold for establishing occupational exposure. No AB were found in subjects younger than 30 years. Our study demonstrated detectable levels of asbestos fibres in a sample taken from the general population. The significant increase with age confirmed that amphibole fibres are the most representative of cumulative exposure. © The Author 2015. Published by Oxford

  8. Electrotherapy in the treatment of patients affected by rabies: experiments conducted at the "Maggiore" hospital of Milan in 1865.

    Science.gov (United States)

    Marinozzi, Silvia; Gulino, Matteo; Gazzaniga, Valentina

    2016-12-01

    During the nineteenth century, the scientific context of rabies treatment was weak due to the lack of the literature on specific nosology of the rabies disease, and unspecific and ineffective therapy approaches. Electrotherapy already represented an important therapeutic approach for nervous system diseases, although not specifically for rabies. In the present paper, the authors discuss the use of electrotherapy in the treatment of humans affected by rabies in an experimental study conducted at the Maggiore Hospital of Milan, with the aim of establishing the discovery of a possible specific therapy. By analyzing the printed scientific sources available in the Braidense Library of Milan, the authors describe four experiments conducted on patients of different ages. Symptoms and effects both during and after the electrotherapy are also highlighted. The experiments demonstrated that electricity is not an effective therapy in the treatment of rabies, being rather able to cause serious functional and organic alterations in all the patients. Analyzing the Milanese experiments, the authors reported specific Italian history of a scientific and medical approach to rabies at the end of the 18th century, which led to the promotion of health education, reinforced prevention strategies and opened the way to the vaccination era.

  9. Masarykʼs Correspondence with the South Slavs: A Collection of Letters from Milan Pribićević to T. G. Masaryk

    Czech Academy of Sciences Publication Activity Database

    Hladký, Ladislav; Škerlová, Jana; Cibulka, Pavel

    2016-01-01

    Roč. 102, č. 3 (2016), s. 393-422 ISSN 0037-6922 Institutional support: RVO:67985963 Keywords : T. G. Masaryk * South Slavs * correspondence * Milan Pribićević * Czech-South Slavs relations Subject RIV: AB - History

  10. Groundwater restoration long beyond closure at the Homestake-Milan and United Nuclear-Church Rock uranium mill tailings piles, New Mexico, USA: full-scale programs requiring more than 20 years of active treatment

    International Nuclear Information System (INIS)

    Robinson, W.P.

    1998-01-01

    Since as early as 1975, groundwater contamination from New Mexico uranium mill tailings has been investigated with two sites -Homestake-Milan and United Nuclear-Church Rock -showing severe enough groundwater damage to merit listing on the US Environmental Protection Agency's (EPA) Superfund National Priority List -a nationwide list based on severity of pollution and water resource usefulness. These two sites provide valuable case studies for the first - 1950s -and second - 1970s -generations of uranium mill tailings facilities demonstrating the severity of contamination which ineffective control can allow and the challenge of full scale groundwater restoration. While the groundwater restoration at these sites began in the 1970s and 1980s, active treatment is anticipated into the 21st century. This paper summarizes the groundwater restoration programs at two of these sites - Homestake Mining Company's (HMC) Milan Mill (now called the ''Grants Project'') and United Nuclear Corporation's (UNC) Church Rock Mill. The two sites are summarized with respect to operations, groundwater impact, tailings disposal systems, hydrogeological characteristics of the site and affected areas, applicable standards, and remedial technology applied. This review provides a basis for initial comparisons with uranium mill tailings groundwater restoration challenges outside the USA. These sites provide an important benchmark the complexity of restoration at for large-scale uranium mill tailings sites. The longevity of the restoration efforts demonstrate the results of low-intensity responses to contamination upon detection and delayed enforcement actions. These ''witnesses'' to the value of effective pollution prevention in tailings design and full review and monitoring of tailings operations, have potential to be models of effective groundwater restoration. (orig.)

  11. Measuring the expected increase in cycling in the city of Milan and evaluating the positive effects on the population's health status: a Community-Based Urban Planning experience.

    Science.gov (United States)

    Rebecchi, A; Boati, L; Oppio, A; Buffoli, M; Capolongo, S

    2016-01-01

    It's scientifically known that inactivity is one of the major risk factors for Non-Communicable Diseases. One of the elements affecting the choice of transport mode, regarding circulation in the city, is the cities' urban morphology, i.e. the infrastructural facilities for the slow mobility service. Cyclability, in fact, can help to increase daily physical activity level, therefore becoming a protective factor for individual health. After a literature review about the state of the art regarding the correlation between built environment, active transport and quantification of the physical activity level, we have developed a specific questionnaire to collect information about current and forecast use of bicycle, in case of improvement and implementation of the cycling network. The questionnaire also investigated social and health aspects concerning the anamnesis of the interviewees (age, gender, health status, sport activity performed, etc) and users' opinions about existing infrastructure and planned interventions, designed to promote cycling mobility. Aim of the research was to quantify the increase of physical activity people would have realized in front of an improvement of the specific infrastructures, and the expected positive effects in terms of health. The collected data (343 interviewed in a district of Milan, named "Zona 7") demonstrate that through the implementation of the cycle network, there would be more cyclists to practice the 150 minutes weekly of physical activity recommended by WHO: time spent in cycling, indeed, would increases by 34.4% compared to the current level of cyclability, as detected by our survey. The investigation confirmed that urban interventions, especially those in small-scale, could play a key role in the promotion of healthy lifestyles, inducing therefore important positive effects on the population health. It was also carried out an application of the WHO "Health Economic Assessment Tool" to evaluate the benefits in terms of

  12. Mechanical thermal and electric measurements on materials and components of the main coils of the Milan superconducting cyclotron

    International Nuclear Information System (INIS)

    Acerbi, E.; Rossi, L.

    1988-01-01

    The coils of the Milan Superconducting Cyclotron are the largest superconducting devices built up to now in Italy and constitute the first superconducting magnet for accelerator in Europe. Because of the large stored energy (more than 40 MJ), of the high stresses and of of the need of reliability, a lot of measurements were carried out as well on materials used for the coils, both on superconducting cable and structural materials, as on the main components of the coils and on two double pancakes prototypes (wound with full copper cable). In this paper the results on these measurements are reported and the results of tests on the prototypes are discussed. The aim is to provide an easy source of data for superconducting coils useful to verify calculations or to improve the performances

  13. A multi-source dataset of urban life in the city of Milan and the Province of Trentino.

    Science.gov (United States)

    Barlacchi, Gianni; De Nadai, Marco; Larcher, Roberto; Casella, Antonio; Chitic, Cristiana; Torrisi, Giovanni; Antonelli, Fabrizio; Vespignani, Alessandro; Pentland, Alex; Lepri, Bruno

    2015-01-01

    The study of socio-technical systems has been revolutionized by the unprecedented amount of digital records that are constantly being produced by human activities such as accessing Internet services, using mobile devices, and consuming energy and knowledge. In this paper, we describe the richest open multi-source dataset ever released on two geographical areas. The dataset is composed of telecommunications, weather, news, social networks and electricity data from the city of Milan and the Province of Trentino. The unique multi-source composition of the dataset makes it an ideal testbed for methodologies and approaches aimed at tackling a wide range of problems including energy consumption, mobility planning, tourist and migrant flows, urban structures and interactions, event detection, urban well-being and many others.

  14. The golden altar of S. Ambrogio in Milan: non destructive x-ray fluorescence analysis with a portable apparatus

    International Nuclear Information System (INIS)

    Cesareo, R.; Marabelli, M.; Bandera, S.; Fiorini, C.; Gatti, E.; Leutenegger, P.; Longoni, A.; Gigante, G.E.

    1999-01-01

    The golden altar of S. Ambrogio in Milan is considered one of the most important goldsmith's work never realized. It was constructed in the period between 824 and 859 A.C. approximately. From the metallurgical point of view, ancient gold is composed, besides gold, of silver, copper, iron (< 1%), lead (< 1%) and in some cases of platinum, at trace level. Ancient silver is usually composed by copper, lead, gold (<1%) and iron (< 1%) and in some cases tin, nickel and zinc (at level of traces). The golden altar of S. Ambrogio in Milan was analyzed by means of a portable apparatus using an EDXRF-spectrometer composed by: a) the measuring head composed of a small low-power X-ray tube with a W-anode and working at 30 kV and 0.1 mA, and a thermometrically cooled small size Si-PIN X-ray detector; b) two small boxes for the bias of X-ray tube and detector respectively; c) a multi channel analyzer. For an EDXRF-analysis the measuring head simply touches the surface to be analyzed (approximately 1 cm2 ). The altar of Volvinius was analyzed in about 200 areas; some of them were analyzed twice and at different times, in order to verify the reliability of the apparatus. The four panels of the altar were then analyzed in more than 150 points, in two different sets of measurements. Standard samples were first analyzed, in order to verify the correlation between counts and concentration. Values obtained from the measurements are well comparable with standard values, within the experimental errors. This work was partially supported by the Progetto finalizzato Beni Culturali of the Consiglio Nazionale delle Ricerche

  15. Something going on in Milan: a review of the 4th International PhD Student Cancer Conference.

    Science.gov (United States)

    Segré, C

    2010-01-01

    The 4th International PhD Student Cancer Conference was held at the IFOM-IEO-Campus in Milan from 19-21 May 2010 http://www.semm.it/events_researchPast.phpThe Conference covered many topics related to cancer, from basic biology to clinical aspects of the disease. All attendees presented their research, by either giving a talk or presenting a poster. This conference is an opportunity to introduce PhD students to top cancer research institutes across Europe.THE CORE PARTICIPANTING INSTITUTES INCLUDED: European School of Molecular Medicine (SEMM)-IFOM-IEO Campus, MilanBeatson Institute for Cancer Research (BICR), GlasgowCambridge Research Institute (CRI), Cambridge, UKMRC Gray Institute of Radiation Biology (GIROB), OxfordLondon Research Institute (LRI), LondonPaterson Institute for Cancer Research (PICR), ManchesterThe Netherlands Cancer Institute (NKI), Amsterdam'You organizers have crushed all my prejudices towards Italians. Congratulations, I enjoyed the conference immensely!' Even if it might have sounded like rudeness for sure this was supposed to be a genuine compliment (at least, that's how we took it), also considering that it was told by a guy who himself was the fusion of two usually antithetical concepts: fashion style and English nationality.The year 2010 has marked an important event for Italian research in the international scientific panorama: the European School of Molecular Medicine (SEMM) had the honour to host the 4th International PhD Student Cancer Conference, which was held from 19-21 May 2010 at the IFOM-IEO-Campus (http://www.semm.it/events_researchPast.php) in Milan.The conference was attended by more than one hundred students, coming from a selection of cutting edge European institutes devoted to cancer research. The rationale behind it is the promotion of cooperation among young scientists across Europe to debate about science and to exchange ideas and experiences. But that is not all, it is also designed for PhD students to get in touch

  16. 1-hour time resolution data of PM2.5 composition and gaseous precursors in background Milan: pollution sources and atmospheric processes, and their implications for air quality.

    Science.gov (United States)

    Bigi, Alessandro; Bianchi, Federico; De Gennaro, Gianluigi; Di Gilio, Alessia; Fermo, Paola; Ghermandi, Grazia; Prévôt, André; Urbani, Monia; Valli, Gianluigi; Vecchi, Roberta; Piazzalunga, Andrea

    2017-04-01

    Aim of this study is the investigation of processes leading to atmospheric pollutants formation and ageing in Milan, Po valley, i.e. one of the main hotspot region in Europe. Few 1-hour time resolution campaigns were accomplished in Milan urban area and none of these dealt with simultaneous characterization of atmospheric pollutants in both gas and particle phase. The present study is based on a thorough analysis of hourly data of atmospheric pollutants and of main PM2.5 compounds, and it includes several soluble inorganic aerosols (Cl-, NO2-, NO3-, SO42-, K+, Mg2+, Ca2+, Na+, NH4+), gases (HCl, HNO2, HNO3, NH3, NO, NO2, O3, SO2) organic, elemental and black carbon and meteorological parameters. The data proceed from an intensive sampling campaign in urban background Milan in summer 2012 (Bigi et al., 2017). Data analysis methods used include mean diurnal pattern on weekdays and Sundays, pollution roses, bivariate polar plots and statistical models using backtrajectories. Results show how nitrous acid (HONO) was mainly formed heterogeneously at nighttime, with a dependence of its formation rate on NO2 consistent with observations during the last HONO campaign in Milan in summer 1998, although since 1998 a drop in HONO levels occurred following to the decrease of its precursors. Nitrate showed two main formation mechanisms: one occurring through N2O5 at nighttime and leading to nitrate formation onto existing particles; another occurring both daytime and nighttime following the homogeneous reaction of ammonia gas with nitric acid gas. Air masses reaching Milan influenced nitrate formation depending on their content in ammonia and the timing of arrival. Notwithstanding the low level of SO2 in Milan, its peaks were associated to point source emissions in the Po valley or shipping and power plant emissions SW of Milan, beyond the Apennines. A distinctive pattern for HCl was observed, featured by an afternoon peak and a morning minimum, and best correlated to

  17. Release of IL-1β Triggered by Milan Summer PM10: Molecular Pathways Involved in the Cytokine Release

    Science.gov (United States)

    Bengalli, Rossella; Molteni, Elisabetta; Longhin, Eleonora; Refsnes, Magne; Camatini, Marina; Gualtieri, Maurizio

    2013-01-01

    Particulate matter (PM) exposure is related to pulmonary and cardiovascular diseases, with increased inflammatory status. The release of the proinflammatory interleukin- (IL-) 1β, is controlled by a dual pathway, the formation of inactive pro-IL-1β, through Toll-like receptors (TLRs) activation, and its cleavage by NLRP3 inflammasome. THP-1-derived macrophages were exposed for 6 h to 2.5 μg/cm2 of Milan PM10, and the potential to promote IL-1β release by binding TLRs and activating NLRP3 has been examined. Summer PM10, induced a marked IL-1β response in the absence of LPS priming (50-fold increase compared to unexposed cells), which was reduced by caspase-1 inhibition (91% of inhibition respect summer PM10-treated cells) and by TLR-2 and TLR-4 inhibitors (66% and 53% of inhibition, resp.). Furthermore, summer PM10 increased the number of early endosomes, and oxidative stress inhibition nearly abolished PM10-induced IL-1β response (90% of inhibition). These findings suggest that summer PM10 contains constituents both related to the activation of membrane TLRs and activation of the inflammasome NLPR3 and that TLRs activation is of pivotal importance for the magnitude of the response. ROS formation seems important for PM10-induced IL-1β response, but further investigations are needed to elucidate the molecular pathway by which this effect is mediated. PMID:23509682

  18. Release of IL-1β Triggered by Milan Summer PM10: Molecular Pathways Involved in the Cytokine Release

    Directory of Open Access Journals (Sweden)

    Rossella Bengalli

    2013-01-01

    Full Text Available Particulate matter (PM exposure is related to pulmonary and cardiovascular diseases, with increased inflammatory status. The release of the proinflammatory interleukin- (IL- 1β, is controlled by a dual pathway, the formation of inactive pro-IL-1β, through Toll-like receptors (TLRs activation, and its cleavage by NLRP3 inflammasome. THP-1-derived macrophages were exposed for 6 h to 2.5 μg/cm2 of Milan PM10, and the potential to promote IL-1β release by binding TLRs and activating NLRP3 has been examined. Summer PM10, induced a marked IL-1β response in the absence of LPS priming (50-fold increase compared to unexposed cells, which was reduced by caspase-1 inhibition (91% of inhibition respect summer PM10-treated cells and by TLR-2 and TLR-4 inhibitors (66% and 53% of inhibition, resp.. Furthermore, summer PM10 increased the number of early endosomes, and oxidative stress inhibition nearly abolished PM10-induced IL-1β response (90% of inhibition. These findings suggest that summer PM10 contains constituents both related to the activation of membrane TLRs and activation of the inflammasome NLPR3 and that TLRs activation is of pivotal importance for the magnitude of the response. ROS formation seems important for PM10-induced IL-1β response, but further investigations are needed to elucidate the molecular pathway by which this effect is mediated.

  19. Knowledge of human papillomavirus infection and its prevention among adolescents and parents in the greater Milan area, Northern Italy

    Directory of Open Access Journals (Sweden)

    Consolo Silvia

    2010-06-01

    Full Text Available Abstract Background In order to be widely accepted by users, the implementation of a new health intervention requires them to be adequately informed about its clinical importance, benefits and risks. The aim of this study was to provide data on the knowledge of Italian adolescents and parents concerning human papillomavirus (HPV infection and its prevention in order to allow the development of adequate training programmes. Methods Between 2 May and 15 June 2008, we made a cross-sectional survey of 863 high school students and 2,331 parents of middle and high school students using two anonymously completed questionnaires covering the knowledge of HPV infection and related diseases, and attitudes to vaccinations. The approached schools were a convenience sample of the schools of the greater Milan area, Northern Italy. Results More mothers than fathers were aware that HPV infection could concern their children (58% vs 53%; p = 0.004 and were favourable towards vaccinating their children against HPV (68% vs 65%; p = 0.03; among the students, more females than males were aware that HPV infection could concern themselves (45% vs 26%; p vs 40%; p Conclusions Both students and parents seem to underestimate the likelihood of HPV infection, and this is associated with a lower propensity for vaccination. This is an important indication for future training programmes concerning HPV prevention designed to increase the acceptance of HPV vaccine in families.

  20. Investigating distribution patterns of airborne magnetic grains trapped in tree barks in Milan, Italy: insights for pollution mitigation strategies

    Science.gov (United States)

    Vezzola, Laura C.; Muttoni, Giovanni; Merlini, Marco; Rotiroti, Nicola; Pagliardini, Luca; Hirt, Ann M.; Pelfini, Manuela

    2017-08-01

    High levels of air particulate matter (PM) have been positively correlated with respiratory diseases. In this study, we performed a biomonitoring investigation using samples of bark obtained from trees in a selected study area in the city of Milan (northern Italy). Here, we analyse the magnetic and mineralogical properties of the outer and inner barks of 147 trees, finding that magnetite is the prevalent magnetic mineral. The relative concentration of magnetite is estimated in the samples using saturation isothermal remanent magnetization (SIRM) and hysteresis parameters. We also make a first-order estimate of absolute magnetite concentration from the SIRM. The spatial distribution of the measured magnetic parameters is evaluated as a function of the distance to the main sources of magnetic PM in the study area, for example, roads and tram stops. These results are compared with data from a substantially pollution-free control site in the Central Italian Alps. Magnetic susceptibility, SIRM and magnetite concentration are found to be the highest in the outer tree barks for samples that are closest to roads and especially tram stops. In contrast, the inner bark samples are weakly magnetic and are not correlated to the distance from magnetite PM sources. The results illustrate that trees play an important role acting as a sink for airborne PM in urban areas.

  1. [Mobbing and its effects on health. the experience of the "Clinica del Lavoro Luigi Devoto" in Milan].

    Science.gov (United States)

    Punzi, Silvia; Cassitto, Maria Grazia; Castellini, Giovanna; Costa, G; Gilioli, R

    2007-01-01

    There is increasing interest in research, prevention and management of mobbing in the field of occupational psychosocial risks. To describe mobbing and its health effects by analysis of the cases examined from 1997 to 2003 at the Department of Occupational Health "Clinica del Lavoro Luigi Devoto" in Milan. A total of 226 clinical records of patients who reported a mobbing situation when undergoing medical examination were selected out of 2455 patients examined for stress-related disorders. The percentage of women was higher (53.1%) than in men (46.9%) with a prevalent age range of 35-54 years. There was a great variety of jobs, especially white-collars and workers in large service companies. In one third of the cases, mobbing occurred within 4 years from beginning of employment and mostly after company reorganization and management changes. The most frequent negative acts included social isolation and demotion. The most frequent symptoms were exhaustion, sleep, mood and sexual disorders. The number of symptoms was not related to the duration of mobbing but to the number and frequency of negative actions. 61.1% of the subjects took psychotropic drugs. Occupational health physicians play an essential role in primary prevention (information on occupational risks) and in early diagnosis and rehabilitation and could act as mediators between workers and enterprises.

  2. New strategies to ensure good patient–physician communication when treating adolescents and young adults with cancer: the proposed model of the Milan Youth Project

    Directory of Open Access Journals (Sweden)

    Magni MC

    2015-08-01

    Full Text Available Maria Chiara Magni,1 Laura Veneroni,1 Carlo Alfredo Clerici,2 Tullio Proserpio,3 Giovanna Sironi,1 Michela Casanova,1 Stefano Chiaravalli,1 Maura Massimino,1 Andrea Ferrari1 1Pediatric Oncology Unit, Fondazione IRCCS Istituto Nazionale Tumori, Milan, Italy; 2Department of Pathophysiology and Transplantation, University of Milan, Milan, Italy; 3Pastoral Care Unit, Fondazione IRCCS Istituto Nazionale Tumori, Milan, Italy Abstract: Adolescence is a particularly complex time of life, entailing physiological, psychological, and social changes that further the individual's cognitive, emotional, and social growth. Being diagnosed with cancer at this time can have important consequences on an individual's emotional and physical development, and adolescent and young adult cancer patients have particular medical and psychosocial needs. Patient–physician communications are important in any clinical relationship, but fundamental in the oncological sphere because their quality can affect the patient–physician relationship, the therapeutic alliance, and patient compliance. A major challenge when dealing with adolescent and young adult patients lies in striking the right balance between their need and right to understand their disease, treatment, and prognosis, and the need for them to remain hopeful and to protect their emotional sensitivity. We herein describe the activities of the Youth Project of the Istituto Nazionale Tumori in Milan, Italy in order to share a possible model of interaction with these special patients and the tactics our group has identified to help them communicate and share their thoughts. This model implies not only the involvement of a multidisciplinary team, including psychologists and spirituality experts, but also the constitution of dedicated creative activities to give patients the opportunity to express feelings they would otherwise never feel at ease putting into words. These efforts seek the goal to minimize the potentially

  3. [Manual handling of loads in the hotel trade: the experience of the ASL (Local Health Unit) Milan].

    Science.gov (United States)

    Fontani, S; Mercuri, Irene; Salicco, R; Veratti, Silvia; Sorrentino, L

    2010-01-01

    There are over 400 hotels in Milan with a guest capacity of about 62,000 and employing more than 10,000 workers. In 2008/09 the Occupational Health and Safety Service of A.S.L. Milano (Local Health Unit) carried out research into the hotel trade to ascertain the development of this commercial sector, also in view of EXPO 2015. The aim of the project was to improve hygiene and safety conditions and carry out preventive measures. A specific purpose was to study manual handling of loads and repetitive movements risk. The study covered 30 hotels and 7 temporary staff cooperatives. We acquired the Risk Evaluation Document, the Health Surveillance Programme and Registers of Labour Accidents to analyze manual handling of loads and repetitive movements. In the investigations and assessments on hotels we used currently available scientific tools--NIOSH Lifting Index, Push and Pulling Analysis, OC.R.A. Check-List--to study risks related to handling loads and upper limb mechanical overload, which revealed a specific occupational risk that requires a fresh approach to prevention and safety in the entire sector. Chambermaid: LI (Range): 0.57-2.75; Push and Pulling Actions: Fi 0.66-Fm 1.5 and Fi 0.76-Fm 1.33 respectively; OC.R.A. Check-List: 21. Porter: LI (Range): 0.77-3.75. Maintenance staff LI (Range): 0.57-2.75. The study highlighted the presence of risk due to manual handling of loads and repetitive movements in porters, maintenance personnel and particularly in chambermaids that up to now have been poorly assessed by safety experts. Analysis of the information contained in the registers of labour accidents suggests that a significant number of accidents can be related to muscular-skeletal disorders that affect especially cleaning, portering and kitchen staff

  4. Arts and science under the sign of Leonardo. The case of the National Museum of Science and Technology ‘Leonardo da Vinci’ of Milan (Italian original version

    Directory of Open Access Journals (Sweden)

    Claudio Giorgione

    2009-06-01

    Full Text Available Drawing on the example of Leonardo da Vinci, who was able to combine arts and science in his work, the National Museum of Science and Technology of Milan has always pursued the blending and the dialogue of humanistic and scientific knowledge. It has employed this approach in all of its activities, from the set design of exhibition departments to the acquisition of collections and, more recently, in the dialogue with the public. Now more than ever, following a renewal path for the Museum, these guidelines are being subject to research to achieve a new and more up-to-date interpretation.

  5. Arts and science under the sign of Leonardo. The case of the National Museum of Science and Technology ‘Leonardo da Vinci’ of Milan

    Directory of Open Access Journals (Sweden)

    Claudio Giorgione

    2009-06-01

    Full Text Available Drawing on the example of Leonardo da Vinci, who was able to combine arts and science in his work, the National Museum of Science and Technology of Milan has always pursued the blending and the dialogue of humanistic and scientific knowledge. It has employed this approach in all of its activities, from the set design of exhibition departments to the acquisition of collections and, more recently, in the dialogue with the public. Now more than ever, following a renewal path for the Museum, these guidelines are being subject to research to achieve a new and more up-to-date interpretation.

  6. Applying Bim to Built Heritage with Complex Shapes: the Ice House of Filarete's Ospedale Maggiore in Milan, Italy

    Science.gov (United States)

    Oreni, D.; Karimi, G.; Barazzetti, L.

    2017-08-01

    This paper presents the development of a BIM model for a stratified historic structure characterized by a complex geometry: Filarete's Ospedale Maggiore ice house, one of the few remaining historic ice houses in Milan (Fig. 1). Filarete, a well-known Renaissance architect and theorist, planned the hospital in the 15th century, but the ice house was built two centuries later with a double-storey irregular octagonal brick structure, half under and half above ground, that enclosed another circular structure called the ice room. The purpose of the double-walled structure was to store ice in the middle and store and preserve perishable food and medicine at the outer side of the ice room. During World War II, major portions of the hospital and the above-ground section of the ice house was bombed and heavily damaged. Later, in 1962, the hospital was restored and rehabilitated into a university, with the plan to conceal the ice house's remaining structure in the courtyard, which ultimately was excavated and incorporated into a new library for the university. A team of engineers, architects, and students from Politecnico di Milano and Carleton University conducted two heritage recording surveys in 2015 and 2016 to fully document the existing condition of the ice house, resulting in an inclusive laser scanner and photogrammetric point cloud dataset. The point cloud data was consolidated and imported into two leading parametric modelling software, Autodesk Revitand Graphisoft ArchiCAD©, with the goal to develop two BIMs in parallel in order to study and compare the software BIM workflow, parametric capabilities, attributes to capture the complex geometry with high accuracy, and the duration for parametric modelling. The comparison study of the two software revealed their workflow limitations, leading to integration of the BIM generative process with other pure modelling software such as Rhinoceros©. The integrative BIM process led to the production of a comprehensive BIM

  7. APPLYING BIM TO BUILT HERITAGE WITH COMPLEX SHAPES: THE ICE HOUSE OF FILARETE’S OSPEDALE MAGGIORE IN MILAN, ITALY

    Directory of Open Access Journals (Sweden)

    D. Oreni

    2017-08-01

    Full Text Available This paper presents the development of a BIM model for a stratified historic structure characterized by a complex geometry: Filarete’s Ospedale Maggiore ice house, one of the few remaining historic ice houses in Milan (Fig. 1. Filarete, a well-known Renaissance architect and theorist, planned the hospital in the 15th century, but the ice house was built two centuries later with a double-storey irregular octagonal brick structure, half under and half above ground, that enclosed another circular structure called the ice room. The purpose of the double-walled structure was to store ice in the middle and store and preserve perishable food and medicine at the outer side of the ice room. During World War II, major portions of the hospital and the above-ground section of the ice house was bombed and heavily damaged. Later, in 1962, the hospital was restored and rehabilitated into a university, with the plan to conceal the ice house’s remaining structure in the courtyard, which ultimately was excavated and incorporated into a new library for the university. A team of engineers, architects, and students from Politecnico di Milano and Carleton University conducted two heritage recording surveys in 2015 and 2016 to fully document the existing condition of the ice house, resulting in an inclusive laser scanner and photogrammetric point cloud dataset. The point cloud data was consolidated and imported into two leading parametric modelling software, Autodesk Revit© and Graphisoft ArchiCAD©, with the goal to develop two BIMs in parallel in order to study and compare the software BIM workflow, parametric capabilities, attributes to capture the complex geometry with high accuracy, and the duration for parametric modelling. The comparison study of the two software revealed their workflow limitations, leading to integration of the BIM generative process with other pure modelling software such as Rhinoceros©. The integrative BIM process led to the production

  8. Impact of nitrous acid photolysis on the total hydroxyl radical budget during the Limitation of Oxidant Production/Pianura Padana Produzione di Ozono study in Milan

    Science.gov (United States)

    Alicke, B.; Platt, U.; Stutz, J.

    2002-11-01

    The photolysis of nitrous acid (HONO) in the early morning hours is believed to be a significant source of hydroxyl radicals (OH), the most important daytime oxidizing species. Although the importance of this mechanism has been recognized for many years, no accurate experimental quantification is available. Here we present measurements of HONO, NO2, SO2, O3 and HCHO by Differential Optical Absorption Spectroscopy (DOAS) during the Limitation of Oxidant Production/Pianura Padana Produzione di Ozono (LOOP/PIPAPO) study in May-June 1998 in Milan, Italy. The concentration of NO and J(NO2)/J(HONO) were simultaneously monitored by in situ monitors. The photolysis frequencies of HCHO and O3 were determined with a radiative transfer model. High nocturnal HONO mixing ratios of up to 4.4 ppb were regularly observed. Elevated daytime HONO levels during cloudy periods show that the formation of HONO proceeds after sunrise and therefore also represents a source of hydroxyl radicals throughout the day. Averaged over 24 hours, HCHO photolysis is the most important source of OH in Milan, followed by either ozone or HONO photolysis. Our observations indicate that on certain days the OH production from HONO can be even more important than that from ozone photolysis. The diurnal variation of the different OH formation mechanisms shows that HONO photolysis is by far the most important source in the early hours of the morning, and can be as large as and even surpass the total OH production at noon.

  9. [The effects of the traffic restriction fee (Ecopass) in the center of Milan on urban pollution with particulate matter: the results of a pilot study].

    Science.gov (United States)

    Ruprecht, Ario A; Invernizzi, Giovanni

    2009-01-01

    the city of Milan introduced a traffic charging zone in city center in January 2008, named Ecopass. to compare PM1, PM2,5 and PM10 levels in and outside the restricted area before and after the enforcement of the charging scheme. PM1, PM2,5 and PM10 exposures were measured by means of pre-calibrated portable laser-operated particle analyzers. PM10 data from the ARPA official monitoring stations were also evaluated. during a walking trip from Piazza Loreto (outside) to Piazza Duomo (inside Ecopass zone) and back, mean (SD) PM1, PM2,5 and PM10 were 31 (6), 68 (24) and 93 (37) microg/m3 inside the Ecopass zone, and 32 (6), 70 (37), 98 (48) microg/m3 in the outer area, respectively (not significant, ns). In another trip walking from Piazza Buonarroti to Piazza Duomo and back, PM1, PM2,5 and PM10 levels were 56 (2), 183 (14) and 245 (28) microg/m3 inside the Ecopass zone, and 58 (3), 197 (13) and 247 (24) microg/m3 in the outer area, respectively (ns). In the measurements taken from a car moving in three ring belts--one inside the restricted zone, and two outer radial orbitals--PM1, PM2,5 and PM10 levels were found 41 (1), 110 (8) and 148 (16) microg/m3 inside the Ecopass area, 42 (3), 116 (14) and 152 (28) microg/m3 along the middle belt, and 39 (4), 102 (15) and 127 (23) microg/m3 along the greater Milan orbital ("Tangenziale"), respectively (ns). Mean (SD) PM10 levels from ARPA in the two months before the enforcement were 71.2 (32.6) and 74.8 (38.4) microg/m3, in the Ecopass zone and outside, respectively while after the enforcement were 67.3 (36.4) and 70.9 (38.3) microg/m3 of PM10, respectively (ns). no signficant improvement in air quality was observed after the enforcement of the Ecopass charging zone in Milan. In spite of their limitations, the present data confirm that small scale reductions in particle emissions are not sufficient to reach the goal of an improvement in air quality. Large scale, coordinated interventions on an inter-regional basis are

  10. Postoperative Albumin-Bilirubin Grade Change Predicts the Prognosis of Patients with Hepatitis B-Related Hepatocellular Carcinoma Within the Milan Criteria.

    Science.gov (United States)

    Li, Chuan; Zhang, Xiao-Yun; Peng, Wei; Wen, Tian-Fu; Yan, Lu-Nan; Li, Bo; Yang, Jia-Yin; Wang, Wen-Tao; Xu, Ming-Qing

    2017-11-14

    Albumin-bilirubin (ALBI) grade has been validated as a simple, evidence-based, and objective prognostic tool for patients with hepatocellular carcinoma (HCC). However, minimal information is available concerning postoperative ALBI grade changes in HCC. This study aimed to investigate the prognostic value of postoperative ALBI grade changes in patients with hepatitis B virus (HBV)-related HCC within the Milan criteria after liver resection. Patients with HBV-related HCC within the Milan criteria who underwent liver resection between 2010 and 2016 at West China Hospital were reviewed (N = 258). A change in ALBI grade was defined as first postoperative month ALBI grade-preoperative ALBI grade. If the value was >0, postoperative worsening of ALBI grade was considered; otherwise, stable ALBI grade was considered. Cox proportional hazard regression analyses were used to determine the factors that influence recurrence and survival. During the follow-up, 130 patients experienced recurrence and 47 patients died. Multivariate analyses revealed that postoperative worsening of ALBI grade (HR 1.541, 95% CI 1.025-2.318, P = 0.038), microvascular invasion (MVI, HR 1.802, 95% CI 1.205-2.695, P = 0.004), and multiple tumors (HR 1.676, 95% CI 1.075-2.615, P = 0.023) were associated with postoperative recurrence, whereas MVI (HR 2.737, 95% CI 1.475-5.080, P = 0.001), postoperative worsening of ALBI grade (HR 2.268, 95% CI 1.227-4.189, P = 0.009), high alpha-fetoprotein level (HR 2.055, 95% CI 1.136-3.716, P = 0.017), and transfusion (HR 2.597, 95% CI 1.395-4.834, P = 0.003) negatively influenced long-term survival. Patients with postoperative worsening of ALBI grade exhibited increased incidence of recurrence and worse long-term survival. Postoperative worsening of ALBI grade was associated with increased recurrence and poorer overall survival for patients with HBV-related HCC within the Milan criteria. We should pay attention to liver function changes in HCC patients

  11. Final Report on an Analysis of the Education and Training Systems at Milan, Michigan and Terre Haute, Indiana to Federal Prison Industries Incorporated, U.S. Department of Justice.

    Science.gov (United States)

    Hitt, William D.; And Others

    Existing education and training (E&T) programs at the Terre Haute Penitentiary, Indiana, and the Milan Federal Correctional Institution, Michigan, were described and evaluated. Needs, objectives, inmate classification and placement, staff, and other aspects were covered. Reports, staff and inmate interviews, study of instructional materials, and…

  12. Il ruolo del paradosso nel gioco e nel comico: una lettu-ra del racconto “Il falso autostop” di Milan Kundera

    Directory of Open Access Journals (Sweden)

    Darwine Delvecchio

    2017-12-01

    Full Text Available In questo articolo vogliamo esporre gli studi che hanno riconosciuto al paradosso un ruolo centrale non soltanto nel discorso comico ma anche nella comunicazione umana più in generale, confrontandoli con la nostra tesi sull’“assurdo comico”. Nella nostra prospettiva l'essenza della comicità è paradossale dal momento che essa rappresenta l'intreccio insolubile fra due domini modali che le logiche disgiuntive e la nostra comune idea della “realtà quotidiana” mantengono nettamente distinti: l'impossibile e l'effettuale. Alla parte teorica, dedicata alle teorie di Gregory Bateson e di William F. Fry, che elaborano in maniera originale l’intreccio fra i concetti di gioco, paradosso e finizione, seguirà l’analisi del racconto “Il falso autosop” di Milan Kundera, che mostra i limiti delle loro teorie e un’opportunità di arricchimento per mezzo del concetto di “assurdo comico”.

  13. The architect Milan Lojanica’s Belgrade realm and visions - from a graduation project to Julino brdo and Gocław, 1962-1972

    Directory of Open Access Journals (Sweden)

    Mokranjac Aleksandra

    2016-01-01

    Full Text Available Attempting to highlight the specificity of the architect Milan Lojanica’s design approach, clearly distinct in his first professional decennary 1962-1972, the focus of this paper is on his firstly designed and developed, and afterwards awarded architectural masterpiece, which he realized with his associates, architects Cagić and Jovanović - i.e. the urban suprastructure of Julino brdo/Jula’s hill (1967-1970. As fifty years has passed from its first drawings, and the project documentation consists of exceptionally rare fragments only, one of the main goals of the research was the attempt to reconstruct the complete creative process - including its particular modality of construction/materialization. Although in its results merely a brief recapitulation of Lojanica’s innovative beginnings, the discourse still may provide a source-material for the genre of textbooks - from student to technical practice - regarding the rarest and almost forgotten discipline of experimental urban (masshousing, with artistic/spiritual/serene touch of a refined prefabricated system. Nonetheless, the opus of the eminent author, the respected creative endeavor of Milan Lojanica, future professor of architecture and the SASA academic, arises from its earliest stages and then permanently confirms itself as an entirety in its continuity. Therefore, the small-scale Julino brdo/Jula’s hill settlement case study is reanalyzed/rethought within Lojanica’s antecedent thematic preoccupations, and additionally within the most challenging subsequent one - the Gocław project (1972, Poland (Polska, throughout its emerging, unrivaled, innovatively envisioned - town/city of hundred-thousand-inhabitants.

  14. Italian horticultural and culinary records of summer squash (Cucurbita pepo, Cucurbitaceae) and emergence of the zucchini in 19th-century Milan.

    Science.gov (United States)

    Lust, Teresa A; Paris, Harry S

    2016-07-01

    Summer squash, the young fruits of Cucurbita pepo, are a common, high-value fruit vegetable. Of the summer squash, the zucchini, C. pepo subsp. pepo Zucchini Group, is by far the most cosmopolitan. The zucchini is easily distinguished from other summer squash by its uniformly cylindrical shape and intense colour. The zucchini is a relatively new cultivar-group of C. pepo, the earliest known evidence for its existence having been a description in a book on horticulture published in Milan in 1901. For this study, Italian-language books on agriculture and cookery dating from the 16th to 19th centuries have been collected and searched in an effort to follow the horticultural development and culinary use of young Cucurbita fruits in Italy. The results indicate that Cucurbita fruits, both young and mature, entered Italian kitchens by the mid-16th century. A half-century later, round and elongate young fruits of C. pepo were addressed as separate cookery items and the latter had largely replaced the centuries-old culinary use of young, elongate bottle gourds, Lagenaria siceraria Allusion to a particular, extant cultivar of the longest fruited C. pepo, the Cocozelle Group, dates to 1811 and derives from the environs of Naples. The Italian diminutive word zucchini arose by the beginning of the 19th century in Tuscany and referred to small, mature, desiccated bottle gourds used as containers to store tobacco. By the 1840s, the Tuscan word zucchini was appropriated to young, primarily elongate fruits of C. pepo The Zucchini Group traces its origins to the environs of Milan, perhaps as early as 1850. The word zucchini and the horticultural product zucchini arose contemporaneously but independently. The results confirm that the Zucchini Group is the youngest of the four cultivar-groups of C. pepo subsp. pepo but it emerged approximately a half-century earlier than previously known. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany

  15. On the Relation Between the Designing Process and the Post-Processing of Couture Maison in Milan Influence That Manufacturing Process of Pret-A-Porter Exerts on Product Design

    OpenAIRE

    大谷, 毅; 池田, 和子; 伊崎, 晴子; 正田, 康博; 森川, 英明

    2012-01-01

    The Japanese fashion business has a low international presence. While it had been skillful in the import and licensing businesses, these businesses do not involve schemes for selling fashion goods on the global market through proactive entrepreneurial creativity. For this reason, one of the research themes of this study is to clarify the features of the design and manufacturing processes in a Milan fashion house (couture-maison) built on a high level of creativity. The following findings were...

  16. The Involvement of Albanian Ethnic Immigrants in Entrepreneurship as a New Possibility on their Integration in the International Labour Market - Their Role in Transnational Bridging For Homemade Products (Case Of The Province Of Milan, Italy

    Directory of Open Access Journals (Sweden)

    MA. Ilir Bejta

    2013-12-01

    Economic integration induces immigrants to increase contacts and be part of economic networks and  social networks too, as well as improve, as a necessity deriving from the economic competition, their human capital capacities and capabilities getting use of international labour market. Considering economic and human capital development we will measure their impact on the social welfare and integration of the ethnic immigrant minority groups in the modern society (Albanians in Province of Milan, Italy.

  17. Impact of Highly Reflective Materials on Meteorology, PM10 and Ozone in Urban Areas: A Modeling Study with WRF-CHIMERE at High Resolution over Milan (Italy

    Directory of Open Access Journals (Sweden)

    Serena Falasca

    2018-02-01

    Full Text Available The Urban Heat Island (UHI is a well-known phenomenon concerning an increasing percentage of the world’s population due to the growth rates of metropolitan areas. Given the health and economic implications of UHIs, several mitigation techniques are being evaluated and tested. In this study, we consider the use of highly reflective materials for urban surfaces, and we carried out numerical experiments using the Weather Research and Forecasting model coupled with the CHIMERE model in order to investigate the effects of these materials on the meteorology and air quality in the urban area of Milan (Italy. Results show that an increase in albedo from 0.2 to 0.7 for urban roofs, walls and streets leads to a decrease in UHI intensity by up to 2–3 °C and of the planetary boundary layer (PBL height of about 500 m. However, the difference of PM10 and ozone between urban and surrounding areas increases by a factor of about 2, attributable to the reduction of PBL height and wind speed and to the increased reflected solar radiation that may enhance photochemical production during the daytime. Therefore, if anthropogenic emissions are held at the same levels, the potential benefit to the UHI in terms of thermal discomfort may have negative repercussions on air quality.

  18. a N-D Virtual Notebook about the Basilica of S. Ambrogio in Milan: Information Modeling for the Communication of Historical Phases Subtraction Process

    Science.gov (United States)

    Stanga, C.; Spinelli, C.; Brumana, R.; Oreni, D.; Valente, R.; Banfi, F.

    2017-08-01

    This essay describes the combination of 3D solutions and software techniques with traditional studies and researches in order to achieve an integrated digital documentation between performed surveys, collected data, and historical research. The approach of this study is based on the comparison of survey data with historical research, and interpretations deduced from a data cross-check between the two mentioned sources. The case study is the Basilica of S. Ambrogio in Milan, one of the greatest monuments in the city, a pillar of the Christianity and of the History of Architecture. It is characterized by a complex stratification of phases of restoration and transformation. Rediscovering the great richness of the traditional architectural notebook, which collected surveys and data, this research aims to realize a virtual notebook, based on a 3D model that supports the dissemination of the collected information. It can potentially be understandable and accessible by anyone through the development of a mobile app. The 3D model was used to explore the different historical phases, starting from the recent layers to the oldest ones, through a virtual subtraction process, following the methods of Archaeology of Architecture. Its components can be imported into parametric software and recognized both in their morphological and typological aspects. It is based on the concept of LoD and ReverseLoD in order to fit the accuracy required by each step of the research.

  19. Canine Fecal Contamination in a Metropolitan Area (Milan, North-Western Italy: Prevalence of Intestinal Parasites and Evaluation of Health Risks

    Directory of Open Access Journals (Sweden)

    Sergio Aurelio Zanzani

    2014-01-01

    Full Text Available Intestinal parasites of dogs represent a serious threat to human health due to their zoonotic potential. Thus, metropolitan areas presenting high concentrations of pets and urban fecal contamination on public areas are at sanitary risk. Major aim of this survey was to determine prevalence of zoonotic parasites in dog fecal samples collected from public soil of Milan (north-western Italy. Differences in parasites prevalence distribution were explored by a geographical information system- (GIS- based approach, and risk factors (human density, sizes of green parks, and dog areas were considered. The metropolitan area was divided into 157 rectangular subareas and sampling was performed following a 1-kilometer straight transect. A total of 463 fecal samples were analyzed using centrifugation-flotation technique and ELISA to detect Giardia and Cryptosporidium coproantigens. A widespread fecal contamination of soil was highlighted, being fecal samples found in 86.8% of the subareas considered. The overall prevalence of intestinal parasites was 16.63%. Zoonotic parasites were found, such as Trichuris vulpis (3.67%, Toxocara canis (1.72%, Strongyloides stercoralis (0.86%, Ancylostomatidae (0.43%, and Dipylidium caninum (0.43%. Giardia duodenalis was the most prevalent zoonotic protozoa (11.06%, followed by Cryptosporidium (1.10%. Faeces from subareas characterized by broad green areas showed to be particularly prone to infection.

  20. A N-D VIRTUAL NOTEBOOK ABOUT THE BASILICA OF S. AMBROGIO IN MILAN: INFORMATION MODELING FOR THE COMMUNICATION OF HISTORICAL PHASES SUBTRACTION PROCESS

    Directory of Open Access Journals (Sweden)

    C. Stanga

    2017-08-01

    Full Text Available This essay describes the combination of 3D solutions and software techniques with traditional studies and researches in order to achieve an integrated digital documentation between performed surveys, collected data, and historical research. The approach of this study is based on the comparison of survey data with historical research, and interpretations deduced from a data cross-check between the two mentioned sources. The case study is the Basilica of S. Ambrogio in Milan, one of the greatest monuments in the city, a pillar of the Christianity and of the History of Architecture. It is characterized by a complex stratification of phases of restoration and transformation. Rediscovering the great richness of the traditional architectural notebook, which collected surveys and data, this research aims to realize a virtual notebook, based on a 3D model that supports the dissemination of the collected information. It can potentially be understandable and accessible by anyone through the development of a mobile app. The 3D model was used to explore the different historical phases, starting from the recent layers to the oldest ones, through a virtual subtraction process, following the methods of Archaeology of Architecture. Its components can be imported into parametric software and recognized both in their morphological and typological aspects. It is based on the concept of LoD and ReverseLoD in order to fit the accuracy required by each step of the research.

  1. La mappa acustica dinamica di Milano da un numero limitato di punti di monitoraggio. Primi risultati - Milan dynamic noise mapping from few monitoring stations. First results

    Directory of Open Access Journals (Sweden)

    Giovanni Zambon

    2016-10-01

    Full Text Available Il questa memoria sono riportati i primi risultati del progetto Dynamap relativi all’area pilota di Milano. Il progetto sviluppa un approccio alla rappresentazione del rumore derivante da traffico stradale che consenta una mappatura acustica dinamica attraverso la scalatura di mappe precalcolate mediante un collegamento diretto con un numero limitato di stazioni di monitoraggio. La possibilità di controllare la mappa acustica di una rete stradale estesa mediante pochi punti di controllo si attua mediante una necessaria aggregazione degli archi stradali in gruppi omogenei. ------ This memory reports the first results of Dynamap project related to the Milan pilot area. The project develops an approach to represent road traffic noise with the outcome of a dynamic noise mapping achieved through the scaling of precalculated maps; scaling is based upon a direct connection to a limited number of noise monitoring stations. The possibility of controlling the acoustic map of an extended road network by means of a few monitoring sites is implemented through a preliminary aggregation of road stretches into homogeneous groups.

  2. The management of ductal intraepithelial neoplasia (DIN): open controversies and guidelines of the Istituto Europeo di Oncologia (IEO), Milan, Italy.

    Science.gov (United States)

    Farante, Gabriel; Zurrida, Stefano; Galimberti, Viviana; Veronesi, Paolo; Curigliano, Giuseppe; Luini, Alberto; Goldhirsch, Aron; Veronesi, Umberto

    2011-07-01

    The management of ductal intraepithelial neoplasia (DIN) has substantially changed over the past 30 years, as its incidence has increased (from 2-3% to more than 20%), mainly due to the widespread use of mammography screening. This article describes not only the more widespread theoretical concepts on DIN but also the differences in the practical applications of the theory between different countries, different oncology specialists, and different cancer centers. Papers related to the international multicentre-randomized trials and retrospective studies were analyzed. We include articles and papers published between 1993 and 2010 related to patients with DIN, and abstracts and reports from MEDLINE and other sources were indentified. The standard of care for DIN consists of (a) breast conservative surgery (mastectomy is still indicated in large lesions--masses or microcalcifications--in about 30% of cases); (b) radiotherapy (RT) after conservative surgery, and (c) medical treatment in estrogen receptors-positive patients. However, most studies have shown significant differences between theory and practical application. Moreover, there are differences regarding (a) the indications of sentinel lymph node biopsy, (b) the definition and identification of low-risk DIN subgroups that can avoid RT and tamoxifen, and (c) the research into new alternative drugs in adjuvant medical therapy. A general agreement on the best management of DIN does not exist as yet. New large trials are needed in order to define the best management of DIN patients which is (in most respects) still complex and controversial.

  3. Influenza A/H1N1/2009 virus - experience of the clinical microbiology laboratory of the “L. Sacco” University Hospital in Milan

    Directory of Open Access Journals (Sweden)

    Lisa Lucia Chenal

    2011-06-01

    Full Text Available In the spring of 2009, a new variant of influenza A/H1N1 virus that had never been isolated before, was identified. From April 27 to December 31, 2009 the respiratory samples of 974 patients, obtained from suspected cases of pandemic influenza A virus infection, were analyzed at the Clinical Microbiology Laboratory of the “L. Sacco” University Hospital in Milan. The diagnosis of influenza A/H1N1 infection was performed initially through the use of different molecular biological methods: Seeplex® RV12 ACE Detection (Seegene, NUCLISENS® EASYQ® INFLUENZA A/B (bioMérieux, Influenza A/B Q-PCR Alert (Nanogen running in parallel with rRT-PCR (CDC to confirm the positivity to the new influenza virus, then was used a single specific test, Fast set H1N1v (Arrow Diagnostics. Retrospective study of data showed that 293 (30.1% patients were positive for the new strain of influenza A/H1N1 virus and 8 (0.8% for influenza A other than H1N1 virus.The distribution of influenza A/H1N1 cases showed two peaks, one on July (62.9% and the other one on October (36%, moreover we observed that 155 patients (53% out of 293 positive for influenza A/H1N1 virus aged under 20 years old. The first positivity peak was found in travelers and the second one, occurred 2-3 months prior to the classic seasonal epidemic influenza, was attributed to autochthonous cases , by which the virus had spread worldwide. The highest proportion of cases were among subjects aged from 0 to 20 years and, over this age the positivity rate decreased proportionally with increasing age, in agreement with data reported in other countries.

  4. The oncologic outcome and immediate surgical complications of lipofilling in breast cancer patients: a multicenter study--Milan-Paris-Lyon experience of 646 lipofilling procedures.

    Science.gov (United States)

    Petit, Jean Yves; Lohsiriwat, Visnu; Clough, Krishna B; Sarfati, Isabelle; Ihrai, Tarik; Rietjens, Mario; Veronesi, Paolo; Rossetto, Fabio; Scevola, Anna; Delay, Emmanuel

    2011-08-01

    Lipofilling is now performed to improve the breast contour, after both breast-conserving surgery and breast reconstruction. However, injection of fat into a previous tumor site may create a new environment for cancer and adjacent cells. There is also no international agreement regarding lipofilling after breast cancer treatment. The authors included three institutions specializing in both breast cancer treatment and breast reconstruction (European Institute of Oncology, Milan, Italy; Paris Breast Center, Paris, France; and Leon Berard Centre, Lyon, France) for a multicenter study. A collective chart review of all lipofilling procedures after breast cancer treatment was performed. From 2000 to 2010, the authors reviewed 646 lipofilling procedures from 513 patients. There were 370 mastectomy patients and 143 breast-conserving surgery patients. There were 405 patients (78.9 percent) with invasive carcinoma and 108 (21.1 percent) with carcinoma in situ. The average interval between oncologic surgical interventions and lipofilling was 39.7 months. Average follow-up after lipofilling was 19.2 months. The authors observed a complication rate of 2.8 percent (liponecrosis, 2.0 percent). Twelve radiologic images appeared after lipofilling in 119 breast-conserving surgery cases (10.1 percent). The overall oncologic event rate was 5.6 percent (3.6 percent per year). The locoregional event rate was 2.4 percent (1.5 percent per year). Lipofilling after breast cancer treatment leads to a low complication rate and does not affect radiologic follow-up after breast-conserving surgery. A prospective clinical registry including high-volume multicenter data with a long follow-up is warranted to demonstrate the oncologic safety. Until then, lipofilling should be performed in experienced hands, and a cautious oncologic follow-up protocol is advised. Therapeutic, IV [corrected].

  5. Effects of various meteorological conditions and spatial emission resolutions on the ozone concentration & ROG/NOx limitation in the Milan area (I)

    Science.gov (United States)

    Bärtsch-Ritter, N.; Keller, J.; Dommen, J.; Prévát, A. S. H.

    2003-02-01

    The three-dimensional photochemical model UAM-V is used to investigate the effects of various meteorological conditions and of the coarseness of emission inventories on the ozone concentration and ROG/NOx limitation of the ozone production in the Po Basin in the northern part of Italy. As a base case, the high ozone episode with up to 200 ppb on 13 May 1998 was modelled and previously thoroughly evaluated with measurements gained during a large field experiment. The performed variations in meteorology are applied to mixing height, air temperature, specific humidity and wind speed. Three coarser emission inventories are obtained by resampling from 3×3 km2 up to 54×54 km2 emission grids. The model results show that changes in meteorological input files have the largest effect on peak ozone. In the modelled ozone plume a slope of 10.1 ppb ozone/°C and in Milan of 2.8 ppb ozone/°C were found. The net ozone formation in northern Italy is more strongly temperature than humidity dependent, while the humidity is very important for the ROG/NOx limitation of the ozone production. For each of the meteorological variations (e.g. doubling the mixing height), the modelled ozone plume remains ROG limited for this case. A strong change towards NOx sensitivity in the ROG limited areas is only found if much coarser emission inventories were applied. Increasing ROG limited areas with increasing wind speed are found, because the ROG limited ozone chemistry induced by point sources is spread over a larger area. Simulations without point sources tend to increase the NOx limited areas.

  6. Effects of various meteorological conditions and spatial emissionresolutions on the ozone concentration and ROG/NOx limitationin the Milan area (I)

    Science.gov (United States)

    Baertsch-, N., , Ritter; Keller, J.; Dommen, J.; Prevot, A. S. H.

    2004-03-01

    The three-dimensional photochemical model UAM-V is used to investigate the effects of various meteorological conditions and of the coarseness of emission inventories on the ozone concentration and ROG/NOx limitation of the ozone production in the Po Basin in the northern part of Italy. As a base case, the high ozone episode with up to 200ppb on 13 May 1998 was modelled and previously thoroughly evaluated with measurements gained during a large field experiment. Systematic variations in meteorology are applied to mixing height, air temperature, specific humidity and wind speed. Three coarser emission inventories are obtained by resampling from 3x3km2 up to 54x54km2 emission grids. The model results show that changes in meteorological input files strongly influence ozone in this area. For instance, temperature changes peak ozone by 10.1ppb/°C and the ozone concentrations in Milan by 2.8ppb/°C. The net ozone formation in northern Italy is more strongly temperature than humidity dependent, while the humidity is very important for the ROG/NOx limitation of the ozone production. For all meteorological changes (e.g. doubling the mixing height), the modelled peak ozone remains ROG limited. A strong change towards NOx sensitivity in the ROG limited areas is only found if much coarser emission inventories were applied. Increasing ROG limited areas with increasing wind speed are found, because the ROG limited ozone chemistry induced by point sources is spread over a larger area. Simulations without point sources tend to increase the NOx limited areas.

  7. Effects of various meteorological conditions and spatial emissionresolutions on the ozone concentration and ROG/NOx limitationin the Milan area (I

    Directory of Open Access Journals (Sweden)

    N. Baertsch-Ritter

    2004-01-01

    Full Text Available The three-dimensional photochemical model UAM-V is used to investigate the effects of various meteorological conditions and of the coarseness of emission inventories on the ozone concentration and ROG/NOx limitation of the ozone production in the Po Basin in the northern part of Italy. As a base case, the high ozone episode with up to 200ppb on 13 May 1998 was modelled and previously thoroughly evaluated with measurements gained during a large field experiment. Systematic variations in meteorology are applied to mixing height, air temperature, specific humidity and wind speed. Three coarser emission inventories are obtained by resampling from 3x3km2 up to 54x54km2 emission grids. The model results show that changes in meteorological input files strongly influence ozone in this area. For instance, temperature changes peak ozone by 10.1ppb/°C and the ozone concentrations in Milan by 2.8ppb/°C. The net ozone formation in northern Italy is more strongly temperature than humidity dependent, while the humidity is very important for the ROG/NOx limitation of the ozone production. For all meteorological changes (e.g. doubling the mixing height, the modelled peak ozone remains ROG limited. A strong change towards NOx sensitivity in the ROG limited areas is only found if much coarser emission inventories were applied. Increasing ROG limited areas with increasing wind speed are found, because the ROG limited ozone chemistry induced by point sources is spread over a larger area. Simulations without point sources tend to increase the NOx limited areas.

  8. Null-space Monte Carlo particle tracking to assess groundwater PCE (Tetrachloroethene) diffuse pollution in north-eastern Milan functional urban area.

    Science.gov (United States)

    Alberti, Luca; Colombo, Loris; Formentin, Giovanni

    2018-04-15

    The Lombardy Region in Italy is one of the most urbanized and industrialized areas in Europe. The presence of countless sources of groundwater pollution is therefore a matter of environmental concern. The sources of groundwater contamination can be classified into two different categories: 1) Point Sources (PS), which correspond to areas releasing plumes of high concentrations (i.e. hot-spots) and 2) Multiple-Point Sources (MPS) consisting in a series of unidentifiable small sources clustered within large areas, generating an anthropogenic diffuse contamination. The latter category frequently predominates in European Functional Urban Areas (FUA) and cannot be managed through standard remediation techniques, mainly because detecting the many different source areas releasing small contaminant mass in groundwater is unfeasible. A specific legislative action has been recently enacted at Regional level (DGR IX/3510-2012), in order to identify areas prone to anthropogenic diffuse pollution and their level of contamination. With a view to defining a management plan, it is necessary to find where MPS are most likely positioned. This paper describes a methodology devised to identify the areas with the highest likelihood to host potential MPS. A groundwater flow model was implemented for a pilot area located in the Milan FUA and through the PEST code, a Null-Space Monte Carlo method was applied in order to generate a suite of several hundred hydraulic conductivity field realizations, each maintaining the model in a calibrated state and each consistent with the modelers' expert-knowledge. Thereafter, the MODPATH code was applied to generate back-traced advective flowpaths for each of the models built using the conductivity field realizations. Maps were then created displaying the number of backtracked particles that crossed each model cell in each stochastic calibrated model. The result is considered to be representative of the FUAs areas with the highest likelihood to host

  9. Enlightening music: the catalogue and digitisation project of Verdi’s archive at the “Archivio Storico Ricordi” in Milan

    Directory of Open Access Journals (Sweden)

    Mathias Balbi

    2014-05-01

    Full Text Available Our contribution concentrates on the processes of cataloguing and digitising of hand–written letters and business documents belonging to the ''Ricordi Historical Archive'' in Milan, which is at present housed in the Braidense National Library; the archive possesses documents referring to the history of the publishing company covering the two centuries of its activities. Starting from the ledgers compiled by Giovanni Ricordi, which cover a period from 1814 up to the middle of the 19th century to the documents relative to the school of engraving, the archive also houses a large number of editorial catalogues, published by Ricordi and by other publishing houses which it took over, as well as the original contracts stipulated with composers and librettists from Giuseppe Verdi and Giacomo Puccini to Arrigo Boito. The collection of about 15,000 hand–written letters covers the period from the beginning of the 19th century to the end of the 20th century and includes documents sent to Ricordi from writers, singers authors, and composers such as Giuseppe Verdi, Giacomo Puccini and Ottorino Respighi and librettists Luigi Illica, Giuseppe Giacosa and Arrigo Boito. The second part of the correspondence is made up letter–books and business correspondence which were kept intact from 1888 to 1962, except for the period from 1944 to 1953. Since 2006, work has been carried out to catalogue and digitise the Ricordi Archive based on the standards set out by the National Library Service (Servizio Bibliotecario Nazionale – SBN which is head of the Central Institute for the Single Catalogue (ICCU. The structure and use of the archive and the external transmission of its contents are safeguarded and enhanced thanks to the combined work of cataloguing and digitisation of this heritage: the preliminary cataloguing of the documents uses a simplified model of the scheme adopted in the description of the manuscript according to sw Manus, elaborated by ICCU: the

  10. Impact of Pretransplant Bridging Locoregional Therapy for Patients With Hepatocellular Carcinoma Within Milan Criteria Undergoing Liver Transplantation: Analysis of 3601 Patients From the US Multicenter HCC Transplant Consortium.

    Science.gov (United States)

    Agopian, Vatche G; Harlander-Locke, Michael P; Ruiz, Richard M; Klintmalm, Goran B; Senguttuvan, Srinath; Florman, Sander S; Haydel, Brandy; Hoteit, Maarouf; Levine, Matthew H; Lee, David D; Taner, C Burcin; Verna, Elizabeth C; Halazun, Karim J; Abdelmessih, Rita; Tevar, Amit D; Humar, Abhinav; Aucejo, Federico; Chapman, William C; Vachharajani, Neeta; Nguyen, Mindie H; Melcher, Marc L; Nydam, Trevor L; Mobley, Constance; Ghobrial, R Mark; Amundsen, Beth; Markmann, James F; Langnas, Alan N; Carney, Carol A; Berumen, Jennifer; Hemming, Alan W; Sudan, Debra L; Hong, Johnny C; Kim, Joohyun; Zimmerman, Michael A; Rana, Abbas; Kueht, Michael L; Jones, Christopher M; Fishbein, Thomas M; Busuttil, Ronald W

    2017-09-01

    To evaluate the effect of pretransplant bridging locoregional therapy (LRT) on hepatocellular carcinoma (HCC) recurrence and survival after liver transplantation (LT) in patients meeting Milan criteria (MC). Pre-LT LRT mitigates tumor progression and waitlist dropout in HCC patients within MC, but data on its impact on post-LT recurrence and survival remain limited. Recurrence-free survival and post-LT recurrence were compared among 3601 MC patients with and without bridging LRT utilizing competing risk Cox regression in consecutive patients from 20 US centers (2002-2013). Compared with 747 LT recipients not receiving LRT, 2854 receiving LRT had similar 1, 3, and 5-year recurrence-free survival (89%, 77%, 68% vs 85%, 75%, 68%; P = 0.490) and 5-year post-LT recurrence (11.2% vs 10.1%; P = 0.474). Increasing LRT number [3 LRTs: hazard ratio (HR) 2.1, P < 0.001; 4+ LRTs: HR 2.5, P < 0.001), and unfavorable waitlist alphafetoprotein trend significantly predicted post-LT recurrence, whereas LRT modality did not. Treated patients achieving complete pathologic response (cPR) had superior 5-year RFS (72%) and lower post-LT recurrence (HR 0.52, P < 0.001) compared with both untreated patients (69%; P = 0.010; HR 1.0) and treated patients not achieving cPR (67%; P = 0.010; HR 1.31, P = 0.039), who demonstrated increased recurrence compared with untreated patients in multivariate analysis controlling for pretransplant and pathologic factors (HR 1.32, P = 0.044). Bridging LRT in HCC patients within MC does not improve post-LT survival or HCC recurrence in the majority of patients who fail to achieve cPR. The need for increasing LRT treatments and lack of alphafetoprotein response to LRT independently predict post-LT recurrence, serving as a surrogate for underlying tumor biology which can be utilized for prioritization of HCC LT candidates.

  11. Measurement of black carbon concentration as an indicator of air quality benefits of traffic restriction policies within the ecopass zone in Milan, Italy

    Science.gov (United States)

    Invernizzi, Giovanni; Ruprecht, Ario; Mazza, Roberto; De Marco, Cinzia; Močnik, Griša; Sioutas, Costantinos; Westerdahl, Dane

    2011-07-01

    Traffic restrictions are an unpopular tool to mitigate urban air pollution, and a measurable improvement in air quality is needed to demonstrate the effectiveness of this measure. Previous attempts failed to detect measurable reductions of PM mass pollution within the areas subject to traffic restriction. However black carbon, which is emitted primarily by traffic sources, could be a PM metric more suitable than PM mass to demonstrate pollutant reductions. In this study we report the results of a black carbon monitoring campaign carried out in Milan, Italy, with the aim to detect - and demonstrate more suitably than PM mass - differences in local urban air quality among three zones located very closely with different traffic intensity. The study was carried out in three different days by measuring simultaneously black carbon and PM mass concentrations with fixed monitoring stations located in three main radial roads connecting the outskirts to the city center, each with three segments: 1) an outer one, with no traffic restrictions 2) an intermediate one, subject to the congestion traffic charge called "Ecopass", where a ticket is required to enter for cars equipped with engines prior to Euro 4 standard; 3) the pedestrian zone (no cars admitted) of Duomo Square in the city center, where each of the three main roads ends. The results demonstrated a sharply declining gradient in black carbon levels from the outer zone, without traffic restrictions, to the more central areas, for all of the three radial main roads. The differences in mean black carbon levels in the same day in the different traffic scheme locations were highly significant for each comparison. In contrast to the Black carbon results, mean PM 10, PM 2.5, PM 1 concentrations did not show significant differences among the different traffic zones on the different campaign days. The ratio of black carbon to PM 10 decreased by 47% and 62% in the Ecopass zone and in the pedestrian zone, respectively, as

  12. An environmental, economical and socio-political analysis of a variety of urban air-pollution reduction policies for primary PM10 and NOx: The case study of the Province of Milan (Northern Italy)

    International Nuclear Information System (INIS)

    Chiesa, M.; Perrone, M.G.; Cusumano, N.; Ferrero, L.; Sangiorgi, G.; Bolzacchini, E.; Lorenzoni, A.; Ballarin Denti, A.

    2014-01-01

    Highlights: • PM10 and NO x emission reduction by different policies have been estimated. • Various actions have been considered, in the transport and residential sectors. • Environmental, economic and socio-political data were jointly evaluated. • Results are reported for the case study of the Province of Milan (Northern Italy). • Bike use fostering best matches cost–benefit results and socio-political acceptance. - Abstract: In the frame of urban air-pollution reduction policies, economic costs and environmental benefits of a variety of actions have been quantitatively assessed for the Province of Milan (Northern Italy), focusing on PM10 and NO x emission sources. Short-to-mid-term interventions that have been taken into consideration include reduction of inner temperature in residential buildings, banning of residential biomass heating systems, banning of diesel fuelled domestic boilers, night-time streets washing, speed limit reduction on highways, circulation restrictions of oldest EURO vehicles, conversion of diesel buses to natural gas, car sharing/biking promotion, DPF adoption in diesel vehicles, extension of road lanes for urban buses, energy efficiency refurbishment in residential buildings. Re*sults emerged from the cost–benefit analysis integrated with socio-political indicators obtained through direct surveys, will contribute, with an holistic and multidisciplinary approach, to drive the local administrators to implement the most suitable actions in one of the most polluted areas in west-Europe

  13. 6th International Workshop on Application of Lasers in Atomic Nuclei Research

    CERN Document Server

    Błaszczak, Z; Marinova, K; LASER 2004

    2006-01-01

    6th International Workshop on Application of Lasers in Atomic Nuclei Research, LASER 2004, held in Poznan, Poland, 24-27 May, 2004 Researchers and graduate students interested in the Mössbauer Effect and its applications will find this volume indispensable. The volume presents the most recent developments in the methodology of Mössbauer spectroscopy. Reprinted from Hyperfine Interactions (HYPE) Volume 162, 1-4

  14. Selected Lectures of the XXIII National Congress of the Italian Society of Neonatology (Società Italiana di Neonatologia, SIN; Milan (Italy; September 25-28, 2017

    Directory of Open Access Journals (Sweden)

    --- Various Authors

    2017-09-01

    Full Text Available Selected Lectures of the XXIII National Congress of the Italian Society of Neonatology (Società Italiana di Neonatologia, SIN; Milan (Italy; September 25-28, 2017Guest Editor: Mauro StronatiLECT 1. COMPLEMENTARY FEEDING IN PRETERM IN­FANTS: MYTHS AND FACTS • A. AcetiLECT 2. NEONATAL HYDRONEPHROSIS • R. AgostinianiLECT 3. WHEN A NEWBORN DIES IN NICU • M. Susi, S. Dosso, A. Anselmi, A. Bertolini, P. BibanLECT 4. RED REFLEX TESTING IMPLEMENTATION IN THE NURSERY: COMPARING EXPERIENCES • G. Araimo, S.G. Osnaghi, M. Colombo, G. Regiroli, L. Colombo, F. MoscaLECT 5. PAIN MANAGEMENT IN PREMATURE IN­FANTS. PAIN SEMIOLOGY AND ASSESS­MENT. ANALGESIA FOR SKIN BREAKING PROCEDURES • I. ArengaLECT 6. VISUAL EVOKED POTENTIALS: WHY AND WHEN PERFORM THEM • A. Baldascino, G. Amorelli, D. Lepore, F. Molle, G. D’Amico, A. CaporossiLECT 7. NURSING NEONATES SUPPORTED ON ECMO: ORGANIZATIONAL FEATURES AND CARING ASPECTS • C. Baracetti, G. Cavallaro, G. Raffaeli, L. Plevani, F. MoscaLECT 8. NEONATAL HYPO- AND HYPERGLYCEMIA: WHAT TO KNOW, WHAT TO DO • G. Barera, G. CassanoLECT 9. THE ESSENTIAL CARE LEVELS: INDICATIONS FOR THE NEWBORN • S. BattilomoLECT 10. VITAMIN D: OLD AND NEW • A. Boldrini, M. Del PistoiaLECT 11. NURSING-SENSITIVE OUTCOMES IN NEONA­TOLOGY • L. Boni, G. GarganoLECT 12. REQUIREMENTS OF MACRONUTRIENTS AND MINERALS IN PARENTERAL NUTRITION OF PRE­TERM INFANTS • V. Bozzetti, P.E. TagliabueLECT 13. KANGAROO MOTHER CARE (KMC AND NEU­ROPROTECTION • G. Calciolari, C. Artese, N. Bertoncelli, E. Beccaria, V. Chiandotto, G. Colombo, S. De Marca, R. Montirosso, G. Paterlini, N. Simeone, F. FerrariLECT 14. HEMODYNAMIC PRINCIPLES AND MANAGE­MENT OF EXTRACORPOREAL MEMBRANE OXYGENATION SUPPORT • F. Canesi, F. Conigliaro, R. Fierro, G. Cavallaro, G. Raffaeli, F. MoscaLECT 15. THE STABILIZATION OF THE NEWBORN BEFORE THE TRANSPORT • V. Cardilli, P. Repole, S. Caoci, R. CellittiLECT 16. NEONATAL EXTRACORPOREAL MEMBRANE OXYGENATION

  15. The Milan Project: A New Method for High-Assurance and High-Performance Computing on Large-Scale Distributed Platforms

    National Research Council Canada - National Science Library

    Kedem, Zvi

    2000-01-01

    ...: Calypso, Chime, and Charlotte; which enable applications developed for ideal, shared memory, parallel machines to execute on distributed platforms that are subject to failures, slowdowns, and changing resource availability...

  16. The introduction of electric vehicles in the private fleet: Potential impact on the electric supply system and on the environment. A case study for the Province of Milan, Italy

    International Nuclear Information System (INIS)

    Perujo, Adolfo; Ciuffo, Biagio

    2010-01-01

    The study analyses the possible impact of the electric vehicles' recharging activities on the electric supply system for the Province of Milan and on the global environment with a 2030 time horizon. In particular, the impact on the electric grid is seen both in terms of total electric energy consumption and in power requested to the grid. Because of the long recharging time required by the car batteries, the probability to have thousands of cars contemporary plugged-in at a given time is not negligible. On the other hand, the impact on the environment is seen in terms of CO 2 emissions reduction. Even if, at the moment, the Italian electric energy mix is mainly generated by means of thermal power stations making use of not renewable fossil fuels, the efficiency of these plants is much higher than the efficiency of a vehicle's engine. Results obtained clearly show that electric vehicles can contribute to the overall CO 2 abatement strategy in the transport sector but at the same time without an appropriate regulation (e.g. the intelligent integration of electric vehicles into the existing power grid as decentralised and flexible energy storage asset), electric vehicles could heavily impact on the daily requested electric power.

  17. Electrical resistivity and induced polarization tomography in identifying the plume of chlorinated hydrocarbons in sedimentary formation: a case study in Rho (Milan - Italy).

    Science.gov (United States)

    Cardarelli, Ettore; Di Filippo, Gerardina

    2009-09-01

    Resistivity and induced polarization surveying were originally developed for mineral exploration but are now finding new applications in the field of environmental and engineering geophysics. The present article reports the results of a geophysical survey performed with the aim of identifying a plume of chlorinated hydrocarbons in sedimentary formations of the Pandania plain. The tested site is characterized by three sand and gravel aquifers containing a quantity of clay particles which influence the overall bulk resistivity and chargeability. According to data obtained using shallow boreholes, mainly dense non-aqueous phase liquids were found as contaminants in the first and second aquifer. The aforementioned geo-electrical methods were applied in both two- and three-dimensional approaches. Steel and copper electrodes were used in the process of field data acquisition and the results of the survey were compared. The geophysical survey revealed some anomalies that could be explained by the presence of dense non-aqueous phase liquids in the soil medium. The concept of normalized chargeability facilitates the interpretation of detected induced polarization anomalies. The shape of the plume was inferred from maps of resistivity and chargeability to a depth of 25 m below the surface of the ground.

  18. Photosynthetic Responses to the Environment. Proceedings Symposium held August 24 - 27, 1992. Volume 8

    Science.gov (United States)

    1992-08-27

    150. satellite 235, 242, 243, 246 data 246 Picea abies 193 remote sensing 247 Pisum sativum 161 seasonal changes 193 Pittosporum tobira 176 senescence...it will be difficult to predict the consequences of ozone depletion on untested species and within a changing global atmosphere and climate ...Strid A, Chow WS, Anderson JM (1990) Effects of supplementary ultraviolet-B radiation on photosynthesis in Pisum sativum . Biochim Biophys Acta 1020

  19. VI Congress of the Radiation Protection Spanish Society: Cordoba, 24-27 Sep 1996: lectures

    International Nuclear Information System (INIS)

    1996-01-01

    This special issue of journal ''Radioproteccion'' complies the lectures presented at the VI Congress of the Radiation Protection Spanish Society. The sessions were: 1.- Radiation protection of people and environment 2.- Radiation protection workers. 3.- Natural radiation 4.- Biological effects of radiations 5.- Radiation protection of patients. 6.- Measurement of radiations 7.- Legislation 8.- Quality Control 9.- Training in radiation protection

  20. Karst Modeling: Proceedings of the Symposium Held in Charlottesville, Virginia on 24-27 February 1999

    National Research Council Canada - National Science Library

    Palmer, Arthur

    1999-01-01

    ...; (5) Groundwater geochemistry; (6) Well head protection areas; (7) Fate and transport of contaminants; (8) Groundwater monitoring and remediation strategies; (9) Land subsidence and foundation stability Stormwater management.

  1. The RC28 Spring Meeting in Brno, 24-27 May 2007

    Czech Academy of Sciences Publication Activity Database

    Smith, Michael

    2007-01-01

    Roč. 43, č. 6 (2007), s. 1222-1227 ISSN 0038-0288. [RC28 Spring Meeting. Brno, 24.05.2007-27.05.2007] R&D Projects: GA MPS 1J/005/04-DP2 Institutional research plan: CEZ:AV0Z70280505 Keywords : social mobility * social stratification * social transformation Subject RIV: AO - Sociology, Demography Impact factor: 0.169, year: 2007

  2. Take your blood pressure to heart! Screening programme 24-27 March

    CERN Multimedia

    2015-01-01

    In Switzerland, one person in four suffers from high blood pressure without knowing it. This silent killer can only be detected by carrying out regular blood pressure tests.     Following our last campaign in October 2014, 30% of participants were found to have previously undetected hypertension. This year, the nurses of the Medical Service are once again organising a blood pressure screening programme. See the flyer for more information. CERN Medical Service

  3. 5th International Workshop on Complex Networks and their Applications

    CERN Document Server

    Gaito, Sabrina; Quattrociocchi, Walter; Sala, Alessandra

    2017-01-01

    This book highlights cutting-edge research in the field of network science, offering scientists, researchers and graduate students a unique opportunity to catch up on the latest advances in theory and a multitude of applications. It presents the peer-reviewed proceedings of the fifth International Workshop on Complex Networks & their Applications (COMPLEX NETWORKS 2016), which took place in Milan during the last week of November 2016. The carefully selected papers are divided into 11 sections reflecting the diversity and richness of research areas in the field. More specifically, the following topics are covered: Network models; Network measures; Community structure; Network dynamics; Diffusion, epidemics and spreading processes; Resilience and control; Network visualization; Social and political networks; Networks in finance and economics; Biological and ecological networks; and Network analysis.

  4. [The Medical Collections of Milan major hospital].

    Science.gov (United States)

    Galimberti, Paolo M

    2009-01-01

    This essay shows the uncommon occurrence of collections developed in a Hospital. In the past centuries the obstetrical gynaecological (since 18th Century) and anatomical collections (since 1829) were oriented to medical education, while the Pharmacy had a rich equipment. In the first half of 20th century, a Museum open to the public was planned, but the second World War and the absence of interest induce the loss of a large part of the materials. Since 2002 we had censed, collected, and listed the historical instruments, and in 2005 we realized a permanent exhibition. The collections combine about 1500 items. We have especial care to save also modern objects and equipments, after they are disused. At last we hope to realize a real Museum, and we search to assume peculiarities, goals, strength, potentials users, custom.

  5. Technology overview: SonoVue (Bracco, Milan).

    Science.gov (United States)

    Greis, Christian

    2004-10-01

    Ultrasound contrast agents introduced to sonography the possibility to demonstrate microvascular organization and parenchymal perfusion. In combination with modern contrast-specific imaging modalities, contrast agent signals can be separated from tissue-derived signals, allowing the detection of extremely small quantities of contrast agent. The following article describes the physical principles for the creation of contrast-specific signals, the particular physicochemical characteristics of SonoVue, a second-generation ultrasound contrast agent, and the resulting possibilities for the assessment of physiological functions.

  6. Exploring Academic Entrepreneurship in the Milan Area

    Science.gov (United States)

    Colapinto, Cinzia

    2011-01-01

    Academic entrepreneurship has become an increasingly important means by which universities can contribute to the economic development of a country. In Italy, universities have produced more than 700 academic spin-off companies in the last ten years. This paper uses case studies to develop an understanding of the key factors that underpin the…

  7. Nash tshelovek v Milane / Ksenia Repson

    Index Scriptorium Estoniae

    Repson, Ksenia

    2006-01-01

    Eesti Kunstiakadeemia tööstusdisaini eriala III kursuse tudeng Pavel Sidorenko sai I koha ja kursusekaaslane Anna-Maria Einla II koha noorte disainerite konkursil Massimo Martini Design Award Milanos. Konkursi korraldusest, Sidorenko ja Einla konkursitöödest

  8. O Lugar da Leitura Silenciosa e da Leitura Oral na vida de Ambrósio, Bispo de Milão (Século IV d. C. * The Place of Silent Reading and Oral Reading in the Life of Ambrose, Bishop of Milan (Fourth-Century A.D.

    Directory of Open Access Journals (Sweden)

    JANIRA FELICIANO POHLMANN

    2014-02-01

    Full Text Available Resumo: Neste artigo nos propomos a relacionar elementos próprios da leitura silenciosa e da leitura oral na vida de Aurélio Ambrósio, bispo da cidade de Milão entre os anos de 374 e 397. Também aproveitamos a oportunidade para esclarecer algumas funções episcopais assinaladas por Ambrósio, especialmente a tarefa de ensinar. Para tanto, entre as obras examinadas para a execução deste trabalho, ressaltamos De Officiis Ministrorum Libri Tres e Exameron, de autoria do próprio bispo milanês, e o livro Confessionis de Agostinho, discípulo de Ambrósio.Palavras-chave: Ambrósio – Bispo – Leitura silenciosa. Abstract: In this article we propose to relate elements own of silent reading and reading oral in the life of Aurelius Ambrosius, bishop of the city of Milan between the years of 374 and 397. Also took the opportunity to clarify some episcopal functions signaled by Ambrosius, specially the task of teaching. For the achievement of our goals, we mainly examined De Officiis Ministrorum Libri Tres and Exameron, authored by own bishop milanese, and the book Confessionis of Augustinus, disciple of Ambrosius.Keywords: Ambrosius – Bishop – Silent reading.

  9. Proceedings of the International Symposium on Detonation (6th) Held at Coronado, California on 24-27 August 1976

    Science.gov (United States)

    1976-08-01

    1452 (1967). and that compounds 77-79 fall within the preci- sion limits of that trend. 15. N. G. Samoilenko, A. A. Vinokurov, V. G. Abramov , and A. G...NM 87545 Marina del Rey, CA 90291 HN. L. Flaugh D). Edwards University of California MS-933 Y. de Longueville U.S. Naval Surface Weapons Center Los

  10. PESC '91 - Annual IEEE Power Electronics Specialists Conference, 22nd, MIT, Cambridge, MA, June 24-27, 1991, Record

    Science.gov (United States)

    1991-07-01

    The present conference discusses a novel microtransformer for use in microswitching converters, a high torque/low-speed switched-reluctance machine, parameter and state estimation in power electronics, a general circuit topology for a multilevel inverter, dc/dc-conversion via saturable induction commutation, a self-oscillating and synchronously rectified dc/dc converter, an HF quasi-square-wave converter, a new family of isolated zero-voltage switched converters, the dual-flow pulse-trimming concept, solid-state reactive power modulation, the harmonic interaction of power systems with static switching, power MOSFETs for reverse conduction, repetitive switching using thyristors, voltage-mode resonant converters, thermal optimization in power electronics, a MOS gate drive with resonant transitions, a real-time estimation of induction-motor rotor time constant, short circuit impedance and leakage in transformer windings, the miniaturization of isolated gate drive circuitry, and one-cycle control of switching converters. (No individual items are abstracted in this volume)

  11. International Conference on Advances in Materials and Processing Technologies: (AMPT2010), 24-27 October 2010, Paris, France

    National Research Council Canada - National Science Library

    Chinesta, Francisco; Chastel, Yvan; Mansori, Mohamed El

    2010-01-01

    "Covers all forming processes including sheet forming, bulk forming, powder forming, forming in melt or near-melt conditions, material removal processes and non-traditional processes such as abrasive...

  12. Proceedings of Users’ Stress Workshop (8th) Held San Antonio, Texas on September 24 - 27, 1991

    Science.gov (United States)

    1991-09-01

    Counselnta Pschology , &, 427-436. Scheler, M.A., & Kraut, R.E. (1979). Increasing educational achievement via self-concept change. B2oj af Educational...with a colleague, I started a comprehensive prevention program. It consisted of a short introduction to the situation in Iraq and the possible

  13. 1978 College Industry Education Conference, Theme: Effective Management of Human Resources. Proceedings, January 24-27, 1978.

    Science.gov (United States)

    Grayson, Lawrence P., Ed.; Biedenbach, Joseph M., Ed.

    Included in these proceedings are papers on such topics as developments and trends in two-year engineering technology programs, cooperative education programs, women in engineering, registration and certification of engineering technology graduates, management education, market analysis, continuing engineering education, industrial training…

  14. Monitoring percieves stress, recovery and non-traumatic lower extremity injuries in competitive runners : [24-27 juni 2015

    NARCIS (Netherlands)

    R.T.A. Otter; Koen A.P.M. Lemmink; M.S. Brink

    2015-01-01

    Introduction Runners often sustain lower extremity injuries (19-79%) (van Gent et al, 2007). In a theoretical model it has been described that a disturbance in perceived stress and recovery can increase the risk of sustaining an injury (Williams & Andersen, 1998). Therefore, the purpose of this

  15. Excursion to Milan with Cisalpino and Carlson Wagonlit Travel

    CERN Multimedia

    2009-01-01

    Special offer for CERN staff and their family. Offer valid: - from 20th May to 12th July 2009 (last return) - only in first class - on direct trains from Geneva or Lausanne Return price per person: CHF 146.00 from Geneva CHF 130.00 from Lausanne Conditions : - reservation only via Carlson Wagonlit Travel, CERN - return reservation compulsory - reservation at least 3 days before departure - tickets are not changeable and not refundable - CWT agency fee not included: CHF 25.00 per order - maximum 4 persons per order - no other reduction possible - limited number of seats Enjoy your lunch in an exclusive and traditional place : in the 1st floor of "Zucca in Galleria" http://www.caffemiani.it EUR 44.00 per person (instead of about 80 Euros) Included: Aperitif, antipasti, main dish, dessert, wine/water, coffee. (Closed on Mondays) Reservation: mailto:business@cisalpino.com

  16. Introduction to the IEEE International Symposium on Applications of Ferroelectrics and International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials.

    Science.gov (United States)

    Ye, Zuo-Guang; Tan, Xiaoli; Bokov, Alexei A

    2012-09-01

    The 20th IEEE International Symposium on Applications of Ferroelectrics (ISAF) was held on July 24-27, 2011, in Vancouver, British Columbia, Canada, jointly with the International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials (PFM). Over a period of four days, approximately 400 scientists, engineers, and students from around the world presented their work and discussed the latest developments in the field of ferroelectrics, related materials, and their applications. It is particularly encouraging to see that a large number of students (115) were attracted to the joint conference and presented high-quality research works. This trend is not only important to this conference series, but more importantly, it is vital to the future of the ferroelectrics field.

  17. A short course on functional equations based upon recent applications to the social and behavioral sciences

    CERN Document Server

    Aczél, J

    1987-01-01

    Recently I taught short courses on functional equations at several universities (Barcelona, Bern, Graz, Hamburg, Milan, Waterloo). My aim was to introduce the most important equations and methods of solution through actual (not artifi­ cial) applications which were recent and with which I had something to do. Most of them happened to be related to the social or behavioral sciences. All were originally answers to questions posed by specialists in the respective applied fields. Here I give a somewhat extended version of these lectures, with more recent results and applications included. As previous knowledge just the basic facts of calculus and algebra are supposed. Parts where somewhat more (measure theory) is needed and sketches of lengthier calcula­ tions are set in fine print. I am grateful to Drs. J. Baker (Waterloo, Ont.), W. Forg-Rob (Innsbruck, Austria) and C. Wagner (Knoxville, Tenn.) for critical remarks and to Mrs. Brenda Law for care­ ful computer-typing of the manuscript (in several versions). A...

  18. The safety of Sonovue in abdominal applications: retrospective analysis of 23188 investigations.

    Science.gov (United States)

    Piscaglia, Fabio; Bolondi, Luigi

    2006-09-01

    The aim of the present retrospective study was to assess the incidence of adverse events (AE) of a second-generation ultrasound contrast agent in real clinical practice. A total of 28 Italian Centres provided data on the postmarketing use of SonoVue (Bracco Spa, Milan, Italy) in abdominal examination performed between December 2001 and December 2004. A total of 23 188 investigations were reported. No fatal event occurred. AEs were reported in 29 cases, of which only two were graded as serious; the rest, 27, were nonserious (23 mild, three moderate and one severe). The overall reporting rate of serious AE was 0.0086%. Overall, only four AEs required treatment (two serious, two nonserious including one moderate and one severe AEs). In conclusion, the present large-scale retrospective analysis showed that SonoVue has a good safety profile in abdominal applications, with an AE reporting rate lower than or similar to that reported for radiologic and magnetic resonance contrast agents.

  19. UAV MULTISPECTRAL SURVEY TO MAP SOIL AND CROP FOR PRECISION FARMING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    G. Sona

    2016-06-01

    Full Text Available New sensors mounted on UAV and optimal procedures for survey, data acquisition and analysis are continuously developed and tested for applications in precision farming. Procedures to integrate multispectral aerial data about soil and crop and ground-based proximal geophysical data are a recent research topic aimed to delineate homogeneous zones for the management of agricultural inputs (i.e., water, nutrients. Multispectral and multitemporal orthomosaics were produced over a test field (a 100 m x 200 m plot within a maize field, to map vegetation and soil indices, as well as crop heights, with suitable ground resolution. UAV flights were performed in two moments during the crop season, before sowing on bare soil, and just before flowering when maize was nearly at the maximum height. Two cameras, for color (RGB and false color (NIR-RG images, were used. The images were processed in Agisoft Photoscan to produce Digital Surface Model (DSM of bare soil and crop, and multispectral orthophotos. To overcome some difficulties in the automatic searching of matching points for the block adjustment of the crop image, also the scientific software developed by Politecnico of Milan was used to enhance images orientation. Surveys and image processing are described, as well as results about classification of multispectral-multitemporal orthophotos and soil indices.

  20. Proceedings of the High Energy Density Matter (HEDM) Conference (5th) Held in Albuquerque, New Mexico on February 24-27, 1991

    National Research Council Canada - National Science Library

    Cordonnier, Michelle E

    1991-01-01

    ..., oxidizers, potential energy surfaces, surface crossing, laser spectroscopy, Fourier transform spectroscopy, cluster-impact fusion, hypervalent anions, hydrogen azide , fluorine azide, photodynamics...

  1. Status of National Programmes on Fast Breeder Reactors. International Working Group on Fast Reactors, Twentieth Annual Meeting, Vienna, 24-27 March 1987

    International Nuclear Information System (INIS)

    1987-07-01

    The Agenda of the meeting was as follows: 1. Approval of the Agenda. 2. Approval of the minutes of the 19th meeting of the IWGFR. 3. Report of the Scientific Secretary regarding the WD activities of the Working Group. 4. Presentations and discussions on national programmes on fast breeder reactors. 5. Consideration of conferences on fast breeder reactors. a. ANS-ENS International Conference on Fast Breeder Systems Experience Gained and Path to Economical Power Generation, Richland, Washington, USA, 13-17 September 1987. b. International Conference on Liquid Metal Engineering and Technology, Avignon, France, 17-20 October 1988. c. Other meetings of interest to IWGFR members. 6. Consideration of major recommendations of some of the WD IWGFR Specialists' Meetings. 7. Consideration of arrangements for Specialists' Meetings in 1987. a. Specialists' Meeting on Fission and Corrosion Products Behaviour in Primary Circuits of LMFBRs, Karlsruhe, Fed. Rep. of Germany, May 1987. b. Specialists' Meeting on LMFBR Reactor Block Antiseismic Design and Verification, Bologna, Italy, October 1987. 8. Selection of topics for Specialists' Meetings to be held in 1988 and suggestions of the IWGFR on other Specialists' Meetings and their justifications. 9. Consideration of joint research activities: a. Coordinated Research Programme on a Comparative Assessment of Processing Techniques for Analysis of Sodium Boiling Noise Detection Data. b. Coordinated Research Programme on Intercomparison of LMFBR Core Mechanics Codes. c. New Topics of CRP. d. Other Activities. 10. Updating of ''LMFBR Plant Parameters''. 11. Informal discussion on ''Safety Criteria for Fast Reactors in IWGFR Countries''. 12. The date and place of the 21th Annual Meeting of the IWGFR

  2. Differences in transition state stabilization between thermolysin (EC 3.4.24.27) and neprilysin (EC 3.4.24.11).

    Science.gov (United States)

    Marie-Claire, C; Ruffet, E; Tiraboschi, G; Fournie-Zaluski, M C

    1998-11-06

    Important homologies in the topology of the catalytic site and the mechanism of action of thermolysin and neprilysin have been evidenced by site-directed mutagenesis. The determination of differences in transition state stabilization between these peptidases could facilitate the design of specific inhibitors. Thus, two residues of thermolysin which could be directly (Tyr157) or indirectly (Asp226) involved in the stabilization of the transition state and their putative counterparts in neprilysin (Tyr625 and Asp709) have been mutated. The results show that Tyr157 is important for thermolysin activity while Tyr625 has no functional role in neprilysin. Conversely, the mutation of Asp226 induced a slight perturbation of thermolysin activity while Asp709 in neprilysin seems crucial in neprilysin catalysis. Taken together these data seem to indicate differences in the transition state mode of stabilization in the two peptidases.

  3. Differences in transition state stabilization between thermolysin (EC 3.4.24.27) and neprilysin (EC 3.4.24.11).

    OpenAIRE

    Marie-Claire, Cynthia; Ruffet, Emmanuel; Tiraboschi, Gilles; Fournie-Zaluski, Marie-Claude

    1998-01-01

    Important homologies in the topology of the catalytic site and the mechanism of action of thermolysin and neprilysin have been evidenced by site-directed mutagenesis. The determination of differences in transition state stabilization between these peptidases could facilitate the design of specific inhibitors. Thus, two residues of thermolysin which could be directly (Tyr157) or indirectly (Asp226) involved in the stabilization of the transition state and their putative counterparts in neprily...

  4. 2018-04-07T02:24:27Z https://www.ajol.info/index.php/all/oai oai:ojs ...

    African Journals Online (AJOL)

    DS (50, 100 or 200mg/kg), diazepam (1mg/kg) or distilled water was administered orally, 30min or 90 min. before performing the tests in mice. The cumulative time spent in open and closed arms was recorded within 5 min. To test for the muscle relaxant effect, DS (50, 100 or 200mg/kg), diazepam (1mg/kg) or distilled water ...

  5. Do not question my honour: A social-scientific reading of the parable of the minas (Lk 19:12b–24, 27

    Directory of Open Access Journals (Sweden)

    Ernest van Eck

    2011-10-01

    Full Text Available This article attempted to read the parable of the minas in a 30 CE context, employing a social scientific reading. The integrity of the parable was delimited to Luke 19:12b–24 and 27. It was argued that this version of the parable (that stems from Q goes back to the earliest layer of the historical Jesus tradition and is a realistic version of the historical background, political background and socioeconomic background of 30 CE Palestine. In this reading of the parable, attention was given to an aspect much neglected in previous scholarship regarding the interpretation of the parable, namely that the third slave in the parable is not condemned. It was argued that this neglected aspect is important for the strategy of the parable. The reading concluded that the parable has two foci; it shows how, in the time of Jesus, the elite exploited the nonelite and how to protest in a situation where the peasantry (the exploited had no legitimate way of protesting against the exploitative practices of the elite.

  6. 2nd Latin American Workshop on Magnetism, Magnetic Materials, and Their Applications

    CERN Document Server

    Sanchez, J

    1994-01-01

    During August 24-27, 1993, approximately 60 scientists from the Americas, Europe and Japan, gathered in the city of Guanajuato, in the state of Guanajuato, Mexico, at the II Latin American Workshop on Magnetism, Magnetic Materials and their Applications. The group of scientists converging into the beautiful city of Guanajuato had come from Argentina, Chile, Brazil, Venezuela, Cuba, several places in Mexico, U. S. A. , Japan, Spain, France, Italy, Germany, Austria, Switzerland, and Denmark. The event attested to the success of the previous Workshop on Magnetism, Magnetic Materials and their Applications, held in Havana, Cuba, in 1991, as well as to the interest, level of activity and quality of the work being carried out in Latin America in the area of magnetism and magnetic materials. Equally important to everyone present was the fact that we had come to honor a friend, Professor L. M. Falicov, on his sixtieth birthday. The choice of a Latin American Workshop on magnetism as a Festschrift for Leo Falicov was,...

  7. Human rights approaches to environmental protection at the international level and their application in the Czech republic

    Czech Academy of Sciences Publication Activity Database

    Müllerová, Hana

    -, č. 11 (2009), s. 24-27 ISSN 1213-4678 Institutional research plan: CEZ:AV0Z70680506 Keywords : protection of environment * human right s * right to the environment Subject RIV: AG - Legal Sciences

  8. Medical Applications

    OpenAIRE

    Biscari, C.; Falbo, L.

    2016-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on ...

  9. 10 Détermination des radionucléides dans le repas. Application aux ...

    African Journals Online (AJOL)

    ASIMANANA

    Paris), R. ESNAUL (Milan), C. LANCE (Barcelone) – Physiologie Végétales - 1 nutrition 1993. [5] - TAYED Ameziane EL Hassani, ETIENNE Persoons – Base physiologique et agronomiques de la production Végétales – Agronomie moderne, ...

  10. LCA Applications

    DEFF Research Database (Denmark)

    Owsianiak, Mikołaj; Bjørn, Anders; Laurent, Alexis

    2017-01-01

    The chapter gives examples of applications of LCA by the central societal actors in government, industry and citizens, and discusses major motivations and challenges for the use of LCA to support science-based decision-making from their respective perspectives. We highlight applications of LCA in...

  11. 3Demonstration Results of Phytoremediation of Explosives-Contaminated Groundwater Using Constructed Wetlands at the Milan Army Ammunition Plant, Milan, Tennessee Volume III.

    Science.gov (United States)

    1998-12-01

    Method 410.4 (Colorimetric, Automated; Manual)", Methods for Chemical Analysis of Water and Wastes - Revised March 1983, (U. S.) Enviromental ...organochlorine pesticides plus PCBs exceeds 0.30 /xg/g wet weight. (For analytical methods see USEPA, 1982). 61 11.6.16.3 Artemia nauplii are obtained as

  12. An ‘archaeological excavation’ in the Milan Central Station. Architecture and narration in the Memorial of the Shoah of Milan

    Directory of Open Access Journals (Sweden)

    Guido Mario Morpurgo

    2016-06-01

    In this sense, the station becomes the subject of a critical modification through an imaginary and physical excavation that reveals the immense, ‘total’ solidity of this archaeological find of our time. The project offers a new interpretation of correspondence between a plan and a construction system using a ‘principle of distancing’, a physical and temporal gap between the new parts and the ‘remains’. By reworking all the elements of the station – through a process of reassembling – the project witnesses to the tragedy of the Shoah, without any further comment. Through the critical interpretation of the document-monument, architecture reaffirms the ethical dimension of memory. Keywords: Memory, Narration, Archaeology, Distancing, Assemblage

  13. The Use of Constructed Wetlands to Phytoremediate Explosives-Contaminated Groundwater at the Milan Army Ammunition Plant, Milan, Tennessee. Cost and Performance Report

    National Research Council Canada - National Science Library

    1999-01-01

    .... To help address this problem, the USAEC and TVA initiated a field demonstration program to evaluate the technical feasibility of using constructed wetlands for remediating explosives-contaminated groundwater...

  14. Medical Applications

    CERN Document Server

    Biscari, C.

    2014-12-19

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field.

  15. Medical Applications

    International Nuclear Information System (INIS)

    Biscari, C; Falbo, L

    2014-01-01

    The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field

  16. Photovoltaic applications

    International Nuclear Information System (INIS)

    Sidrach, M.

    1992-01-01

    The most common terrestrial applications of photovoltaic plants are reviewed. Classification of applications can be done considering end-use sectors and load profiles (consumption demand). For those systems with direct coupling the working point is determined by the intersection of the load line with the I-V curve Design guidelines are provided for photovoltaic systems. This lecture focusses on the distribution system and safeguards

  17. PRIBIC Application

    International Nuclear Information System (INIS)

    Pascual Alonso, J.L.; Barcala Riveira, J.M.

    2002-01-01

    PRIBIC plant (Pollutants Reduction In small Biomass Combustion systems) at CEDER is a facility specifically designed to do biomass combustion tests. In these tests is necessary to know the values of different sensors in real time. With this information the PRIBIC plant is regulated to its optimum point of work and its possible to follow the operation criteria and get test objectives. Different electronic instruments record information about the plant operation. A software application was developed to let a centralised motorization of that information. The application communicates with the instrumentation, recovers data, lets operators see data in real time and saves the information in files. An important part of this document describes that application, and some considerations to generalise this kind of developments to other Experimental Plants, including cost estimations. Descriptions of plant, analysis of the problem, result evaluations, and conclusions can also be found in the document. (Author) 13 refs

  18. Technology applications

    Science.gov (United States)

    Anuskiewicz, T.; Johnston, J.; Leavitt, W.; Zimmerman, R. R.

    1972-01-01

    A summary of NASA Technology Utilization programs for the period of 1 December 1971 through 31 May 1972 is presented. An abbreviated description of the overall Technology Utilization Applications Program is provided as a background for the specific applications examples. Subjects discussed are in the broad headings of: (1) cancer, (2) cardiovascular disease, (2) medical instrumentation, (4) urinary system disorders, (5) rehabilitation medicine, (6) air and water pollution, (7) housing and urban construction, (8) fire safety, (9) law enforcement and criminalistics, (10) transportation, and (11) mine safety.

  19. Other applications

    International Nuclear Information System (INIS)

    Ligou, J.; Benoist, P.; Boffi, V.; Stenic, B.

    1981-01-01

    This chapter reports about the work done by four groups in Italy, France, Switzerland and Yugoslavia on the new applications of transport theory. Among them problems dealing with controlled thermonuclear reactions and/or fusion devices, nonlinear electric conductivity, atomic and crystal models were discussed

  20. Application note :

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  1. Determination Application

    Directory of Open Access Journals (Sweden)

    Paula Cristiane Pinto Mesquita Pardal

    2015-01-01

    Full Text Available The paper aims at discussing techniques for administering one implementation issue that often arises in the application of particle filters: sample impoverishment. Dealing with such problem can significantly improve the performance of particle filters and can make the difference between success and failure. Sample impoverishment occurs because of the reduction in the number of truly distinct sample values. A simple solution can be to increase the number of particles, which can quickly lead to unreasonable computational demands, which only delays the inevitable sample impoverishment. There are more intelligent ways of dealing with this problem, such as roughening and prior editing, procedures to be discussed herein. The nonlinear particle filter is based on the bootstrap filter for implementing recursive Bayesian filters. The application consists of determining the orbit of an artificial satellite using real data from the GPS receivers. The standard differential equations describing the orbital motion and the GPS measurements equations are adapted for the nonlinear particle filter, so that the bootstrap algorithm is also used for estimating the orbital state. The evaluation will be done through convergence speed and computational implementation complexity, comparing the bootstrap algorithm results obtained for each technique that deals with sample impoverishment.

  2. INVITACION AL TEATRO DE MILAN. LAS LOCALIDADES DE EL MUNDO COMO VOLUNTAD Y REPRESENTACION

    OpenAIRE

    BAQUEDANO JER, SANDRA; BAQUEDANO JER, SANDRA

    2003-01-01

    Establecidos los marcos pertinentes de la metáfora del teatro y de las marionetas, presente a lo largo de toda la obra de Schopenhauer, el lector se encuentra en condiciones de entrar al teatro de Milán. El acceso de la puerta principal es la crítica orteguiana hecha al idealismo que permite reconocer el singular aspecto del teatro de Milán, distinguiéndose de cualquier otra instancia filosófica o estética donde representarnos metafóricamente el pensamiento del idealismo. Invitación ...

  3. Marginal Uncertainties Making a Living and Working on the Outskirts of Milan

    Directory of Open Access Journals (Sweden)

    Giacomo Pozzi

    2017-07-01

    Full Text Available In this article we question the meanings and social practices related to living and working in the Social Housing neighbourhoods of Milan’s present-day suburbs. Through the reconstruction of several narratives, we shed light on how uncertainty characterises the professional everyday lives of those social actors who play a particularly significant role in Milan’s complex arena of social housing management (social workers; bailiffs; inspectors; “trouble-solvers”. Isolation, neglect and conflict are the main terms used by the social actors, both to describe the ongoing housing precarity of those who are at risk of losing their homes and to frame the current conditions of social housing. These represent crucial interpretative keys for developing a thick understanding of the housing crisis.

  4. An optimal management of water for a turf irrigation system in Milan area (Italy)

    Science.gov (United States)

    Deangelis, Maria Laura; Mazzoleni, Abramo

    2015-04-01

    The design of an irrigation system is not just "draw", but a complex organization that takes into account of a whole range of information that are inherently contained in the graphic representation of the final plan. The various stages that make up the activity of designing an irrigation system include: general survey of the site to be irrigated, meteorological analysis of the site and the calculation of the water requirement, development of the project with the choice and location of the components. The use of a numerical model based on water balance in a soil-water-atmosphere system allows the evaluation of the optimal water requirement as a function of meteorological characteristics. The water saving is enabled through a smart programming of a modern automation system for irrigation. The meteorological data analysis was conducted choosing from the series of two special years: the year 2002, particularly rainy, and the other in 2007, extraordinarily drought. The determination of the water requirements of turf was conducted on a daily scale. The water consumption was calculated in a classic irrigation system that covers the delivery of 5 mm of water per day, interrupted only by a rain sensor. In the second case water consumption was analysed by managing an irrigation controller based on actual water needs of turf day by day. For the two years in question water savings ranges between 13 and 27%.

  5. Milan Army Ammunition Plant. Remedial Investigation Report. Volume 4. Appendices M - T

    Science.gov (United States)

    1991-12-01

    5,000 12,500 Selenium SE 0.25 3.02 10 100 Silver AG 2.5 4.6 50 2,500 Sodium NA 150.0 500 5,000 50,000 Thallium TL 31.3 81.4 5,000 40,000 Vanadium V 0.775...fibrotic peritonitis, respectively (NAS 1982). Evidence to date suggests that aluminum is not teratogenic or fetotoxic; however, rats exposed by gavage to...dermal lesions, and cardiovascular damage (EPA 1984, Tseng 1977). Arsenic is embryotoxic, fetotoxic, and teratogenic in several animal species (EPA

  6. Enterovirus D68-associated community-acquired pneumonia in children living in Milan, Italy

    NARCIS (Netherlands)

    Esposito, Susanna; Zampiero, Alberto; Ruggiero, Luca; Madini, Barbara; Niesters, Hubert; Principi, Nicola

    Background: An increasing number of children infected by enterovirus D68 (EV-D68) and affected by severe respiratory illness, muscle weakness and paralysis were described in the USA and Canada in 2014 Objectives: To investigate the potential involvement of EV-D68 in determining community-acquired

  7. Personal exposure to airborne ultrafine particles in the urban area of Milan

    International Nuclear Information System (INIS)

    Cattaneo, A; Garramone, G; Taronna, M; Peruzzo, C; Cavallo, D M

    2009-01-01

    The relevance of health effects related to ultrafine particles (UFPs; aerodynamic diameter 5 particles/cm 3 . UFPs measures were divided on the basis of crossed environments or micro-environments, days of the week and day time (hours). The highest measured mean concentrations and data variability were observed during walking time and moving on motorized vehicles (bus and car), indicating that the highest exposure to UFPs can be reached near motorized traffic. The lowest exposures were observed in green areas and in office microenvironments. An appreciable difference between working and non-working days was observed. Concentration patterns and variation by days of the week and time periods appears related to time trends in traffic intensity.

  8. La dimension symbolique du capital social: les grandes cercles et Rotary clubs de Milan

    NARCIS (Netherlands)

    Cousin, B.; Chauvin, S.

    2010-01-01

    Les cercles et clubs bourgeois des métropoles européennes ont jusqu'ici surtout fait l'objet de monographies isolées. Le cas milanais permet de passer à une analyse relationnelle : les institutions de gestion collective du capital social des classes dominantes y forment en effet un espace de jeu et

  9. “The Milan Papyrus” – Seminal Discovery of New Hellenistic Verses

    Directory of Open Access Journals (Sweden)

    Jelena Isak Kres

    2006-07-01

    Full Text Available The publication of some newly discovered poems, probably to be attributed to the Hellenistic epigrammatist Posidippus of Pella, is the most significant recent contribution to the corpus of Greek literature. The sheer amount of the poetry and the light which it sheds on our understanding of the literary period makes it the most important discovery in decades, comparable to the papyrus discoveries of Bacchylides, Menander, and Sappho. Moreover, the text is considered to be the earliest collection of Greek poetry organised on aesthetic principles.

  10. Two Monumental Bases in Piazza del Duomo and Via Mercanti in Milan

    Directory of Open Access Journals (Sweden)

    Dario Daffara

    2017-10-01

    Full Text Available In questo articolo vengono presentati materiali d’archivio inediti su due basamenti monumentali di epoca imperiale scoperti in piazza del Duomo e in via Mercanti. Le modalità della scoperta e la quasi totale scomparsa dei resti archeologici rendono problematico stabilire la reale funzione di questi basamenti, realizzati con tecnica simile e verosimilmente per la stessa funzione. Nel corso degli anni sono state avanzate diverse ipotesi di attribuzione (torri medievali, archi onorari, tetrapili, monumenti onorari; grazie a un gran numero di confronti sono stati esclusi i meno plausibili, arrivando alla conclusione che probabilmente i due basamenti furono realizzati in epoche diverse in corrispondenza dell’antico limite della città pre-romana, forse per sostenere gruppi statuari o colonne onorarie.

  11. Designing MOOCs in Higher Education. Outcomes of an experimentation at the Catholic University of Milan

    Directory of Open Access Journals (Sweden)

    Ferrari Simona

    2015-06-01

    Full Text Available This article aims to describe the meaning and pedagogical reasons for MOOCs (Massive Open Online Courses utilisation in higher education. Initially, we consider the situation in the Italian education, where MOOCs usually were used as tools for the universities’ marketing strategies. Knowing this, Catholic University built the MOOC on Digital Virtues for imaging a new way of thinking about these kinds of formative activities. The results are interesting in terms of dropout rates, branding and customer satisfaction. The key, as the survey we present in this article shows, is quality and reputation.

  12. Signoles Aude, Le Hamas au pouvoir et après ?, Toulouse, Editions Milan, 2006.

    Directory of Open Access Journals (Sweden)

    Jean-François Legrain

    2007-11-01

    Full Text Available Dans les étroites limites imposées par la collection (absence totale de notes et de bibliographie, 112 p. en format réduit, le petit livre d’Aude Signoles, Le Hamas au pouvoir et après ?, commence à combler un vide de l’édition française. Le seul livre jusque là disponible en français et entièrement consacré à Hamas remonte à 7 années maintenant ; doté de nombreuses erreurs factuelles et faisant comme si Hamas était apparu avec l’autonomie des années 1990, il ignorait tout de son passé d’Ass...

  13. Thymomodulin: biological properties and clinical applications.

    Science.gov (United States)

    Kouttab, N M; Prada, M; Cazzola, P

    1989-01-01

    Thymomodulin (Ellem Industria Farmaceutica s.p.a., Milan, Italy) is a calf thymus acid lysate derivative, composed of several peptides with a molecular weight range of 1-10 kD. Thymomodulin did not exhibit any mutagenic effect. Furthermore, thymomodulin used in animal studies showed no toxicity even when used at high concentrations. Of major significance are the observations in murine and human systems that thymomodulin remains active when administered orally. In vitro and in vivo administered thymomodulin was able to induce the maturation of T-lymphocytes. Additionally, studies in vitro showed that this thymic derivative can enhance the functions of mature T-lymphocytes with cascading effects on B-cell and macrophage functions. Extensive human clinical trials with thymomodulin showed that this agent can improve the clinical symptoms observed with various disease processes, including infections, allergies and malignancies, and can improve immunological functions during ageing.

  14. Detector applications

    International Nuclear Information System (INIS)

    Pehl, R.H.

    1977-10-01

    Semiconductor detectors are now applied to a very wide range of problems. The combination of relatively low cost, excellent energy resolution, and simultaneous broad energy-spectrum analysis is uniquely suited to many applications in both basic and applied physics. Alternative techniques, such as magnetic spectrometers for charged-particle spectroscopy, while offering better energy resolution, are bulky, expensive, and usually far more difficult to use. Furthermore, they do not directly provide the broad energy-spectrum measurements easily accomplished using semiconductor detectors. Scintillation detectors, which are approximately equivalent to semiconductor detectors in convenience and cost, exhibit 10 to 100 times worse energy resolution. However, their high efficiency and large potential size recommend their use in some measurements

  15. Modeling Applications.

    Science.gov (United States)

    McMEEKIN, Thomas A; Ross, Thomas

    1996-12-01

    The concept of predictive microbiology has developed rapidly through the initial phases of experimental design and model development and the subsequent phase of model validation. A fully validated model represents a general rule which may be brought to bear on particular cases. For some microorganism/food combinations, sufficient confidence now exists to indicate substantial benefits to the food industry from use of predictive models. Several types of devices are available to monitor and record environmental conditions (particularly temperature). These "environmental histories" can be interpreted, using predictive models, in terms of microbial proliferation. The current challenge is to provide systems for the collection and interpretation of environmental information which combine ease of use, reliability, and security, providing the industrial user with the ability to make informed and precise decisions regarding the quality and safety of foods. Many specific applications for predictive modeling can be developed from a basis of understanding the inherent qualities of a fully validated model. These include increased precision and confidence in predictions based on accumulation of quantitative data, objective and rapid assessment of the effect of environmental conditions on microbial proliferation, and flexibility in monitoring the relative contribution of component parts of processing, distribution, and storage systems for assurance of shelf life and safety.

  16. Promise Zones for Applicants

    Data.gov (United States)

    Department of Housing and Urban Development — This tool assists applicants to HUD's Promise Zone initiative prepare data to submit with their application by allowing applicants to draw the exact location of the...

  17. Learning Android application testing

    CERN Document Server

    Blundell, Paul

    2015-01-01

    If you are an Android developer looking to test your applications or optimize your application development process, then this book is for you. No previous experience in application testing is required.

  18. Connected vehicle applications : environment.

    Science.gov (United States)

    2016-01-01

    The U.S. Department of Transportation has developed a number of connected vehicle environmental : applications, including the Applications for the Environment Real-Time Information Synthesis (AERIS) : research program applications and road weather ap...

  19. Application of Six Sigma Model to Evaluate the Analytical Quality of Four HbA1c Analyzers.

    Science.gov (United States)

    Maesa, Jos Eacute M; Fern Aacute Ndez-Riejos, Patricia; S Aacute Nchez-Mora, Catalina; Toro-Crespo, Mar Iacute A De; Gonz Aacute Lez-Rodriguez, Concepci Oacute N

    2017-01-01

    The Six Sigma Model is a global quality management system applicable to the determination of glycated hemoglobin (HbA1c). In addition, this model can ensure the three characteristics influencing the patient risk: the correct performance of the analytical method with low inaccuracy and bias, the quality control strategy used by the laboratory, and the necessary quality of the analyte. The aim of this study is to use the Six Sigma Model for evaluating quality criteria in the determination of glycated hemoglobin HbA1c and its application to assess four different HbA1c analyzers. Four HbA1c analyzers were evaluated: HA-8180V®, D-100®, G8®, and Variant II Turbo®. For 20 consecutive days, two levels of quality control (high and low) provided by the manufacturers were measured in each of the instruments. Imprecision (CV), bias, and Sigma values (σ) were calculated with the data obtained and a method decision chart was developed considering a range of quality requirements (allowable total error, TEa). For a TEa = 3%, HA-8180V = 1.54 σ, D-100 = 1.63 σ, G8 = 2.20 σ, and Variant II Turbo = -0.08 σ. For a TEa = 4%, HA-8180V = 2.34 σ, D-100 = 2.32 σ, G8 = 3.74 σ, and Variant II Turbo = 0.16 σ. For a TEa = 10%, HA8180V = 7.12 σ, D-100 = 6.46 σ, G8 = 13.0 σ, and Variant II Turbo = 1.56 σ. Applying the Stockholm consensus and its subsequent Milan review to the results: the maximum level in quality requirements for HbA1c is an allowable total error (TEa) = 3%, G8 is located in region 2 σ (2.20), which is a poor result, and HA-8180V and D-100 are both in region 1 σ (1.54 and 1.63, respectively), which is an unacceptable analytical performance.

  20. Pressurized Heavy Water Reactor Fuel: Integrity, Performance and Advanced Concepts. Proceedings of the Technical Meetings held in Bucharest, 24-27 September 2012, and in Mumbai, 8-11 May 2013

    International Nuclear Information System (INIS)

    2014-09-01

    Seven Member States have operating pressurized heavy water reactors (PHWRs), and some of them are also planning new reactors of this type. The current type of PHWR uses natural uranium as the fuel and has an average burnup of 7000 MWd/t (megawatt days per metric tonne). To make these reactors economically competitive with other reactor types, the discharge burnup of PHWR fuel will need to be increased without affecting the integrity of the fuel pin and bundle. A significant increase in the discharge burnup of fuel is possible with the use of advanced fuel cycles in PHWRs. The advanced fuels can be slightly enriched uranium, reprocessed uranium from light water reactors, mixed oxide or thorium based fuels. At the same time, substantial savings in natural uranium resources can also be achieved through the possible extension of the discharge burnup of advanced fuels used in PHWRs without changing reactor hardware. Following the recommendation of the Technical Working Group on Fuel Performance and Technology, two technical meetings were held: Technical Meeting on Fuel Integrity during Normal Operation and Accident Conditions in PHWRs, 24–27 September 2012, Bucharest, Romania; and Technical Meeting on Advanced Fuel Cycles in PHWRs, 8–11 April 2013, Mumbai, India. Their objective was to update information on the performance of PHWR fuels, the status and trends in the use of advanced fuels in PHWRs and the technical readiness for the deployment of such fuel cycles in these types of reactor. This publication contains the proceedings of the two technical meetings, including a record of the discussions held during the various technical sessions

  1. Opening Address [Technical Meeting/Workshop on Topical Issues on Infrastructure Development: Managing the Development of a National Infrastructure for Nuclear Power Plants, Vienna (Austria), 24-27 January 2012

    International Nuclear Information System (INIS)

    Bychkov, A.V.

    2012-01-01

    Good morning, ladies and gentlemen. I would like to express my cordial welcome to the participants of the 6th annual workshop on nuclear power infrastructure since 2006. Looking back at the development of nuclear power programmes for embarking countries since 2006, I am glad to see that many embarking countries apply the IAEA Milestones approach and have made much progress, since several countries already have entered or entering into phase 3, the construction of the first nuclear power plant. Since the last annual workshop, the most shocking event was the accident in Fukushima Daiichi in March 2011, which was caused by an earthquake and tsunami of unprecedented severity. Looking at the impact of this accident on the nuclear power, there were speculations that the expansion in interest in nuclear power, which we had experienced in recent years, could come to an end. However, it is clear now that there will be continuous and significant growth in the use of nuclear power in the next two decades, although at a slower rate than in our previous projections. Most of the growth will occur in countries that already have operating nuclear power plants, such as China, India and Russia. In countries which are considering introducing nuclear power, interest remains strong, despite Fukushima Daiichi. Most of these countries are proceeding with plans to add nuclear power to their energy mix, with the Agency's assistance. Only a few countries cancelled or revised their plans, while others have taken a ''wait and see'' approach. However, the factors that contributed to increasing interest in nuclear power before the Fukushima Daiichi accident have not changed: these include increasing global demand for energy, as well as concerns about climate change, volatile fossil fuel prices and security of energy supply. The countries strongly committed to nuclear power such as the United Arab Emirates, Turkey, Belarus, Vietnam, Jordan, Bangladesh and Poland, keep the same position even after the accident. The IAEA has taken a series of actions in response to the Fukushima accident, including the activation of the IAEA Incident and Emergency Centre immediately after the accident and sending several IAEA International Fact Finding Expert Missions to Japan. Currently, the IAEA is working hard to implement the IAEA Action Plan on Nuclear Safety, which was agreed at the Board of Governors last September. This Action Plan and its implementation will be explained later by my colleagues; I would like to point out that the development of the infrastructrure necessary for Member States embarking on nuclear power programme is one of the 12 areas covered in that action plan. I would like to stress that there is progress in Member States for the introduction of nuclear power. I had several opportunities in bilateral meetings to experience the commitment of senior officials in embarking countries. During the last two months, I visited two newcomer countries - Malaysia and UAE, and got first-hand information about their potential for a national nuclear program. During the side events of the last IAEA General Conference, senior officials from UAE, Turkey and Vietnam clearly expressed their commitments to nuclear power programmes with steady progress in the cooperation with vendor countries. I am impressed that these countries are working closely with vendor countries in developing the required physical infrastructure and human resources. Quite recently, I was informed that Belarus and Bangladesh had intergovernmental agreements with Russia to introduce nuclear power in their countries. So nuclear power remains an important option for energy supply. However, it is a fact that the public is concerned about nuclear safety, and several countries have experienced difficulties in national decisions to introduce nuclear power programmes. Although the situation differs among the countries, I hope that participants can learn good practices for public communication from the experience of other countries. The IAEA is making continuous efforts to strengthen its support to embarking countries with assistance from experienced countries. Our Department established the Integrated Nuclear Infrastructure Group (INIG) in 2011 as a group dedicated to support the nuclear newcomer countries; the number of staff was doubled last year, by increasing the number of regular staff and cost free experts. With regard to the financial contributions, since 2010, funds from the Peaceful Use Initiative support our activities. I would like to draw your attention to the achievements of the last one year: - We had and INIR mission to Bangladesh, headed by Director JK Park, which covered phase 1 and phase 2 activities for the first time in November. The Bangladesh mission demonstrated that the Milestones approach is flexible enough be used in a meaningful way by a country engaging in a non-competitive intergovernmental agreement instead of the bidding process, and considering a Build-Own-Operate contract model instead of a turnkey; - We introduced an Integrated Workplan, which incorporates IAEA activities from different TC projects and other extrabadugeary sources. For Vietnam, we were able to implement 12 workshops, expert missions and training courses since the integrated work plan was introduced in May 2011. This approach to managing assistance activities in nuclear power infrastructure is being applied to other countries as well; - The Technical Working Group on Nuclear Power Infrastructure, which is an advisory committee to me on assistance activities to newcomer countries, chaired by Mr Mendez, provided several useful suggestions to me. I would like to use this opportunity to also express my appreciation to France, the Republic of Korea and the United States for hosting training courses for newcomers under the Technical Cooperation Programme.

  2. Sight Application Analysis Tool

    Energy Technology Data Exchange (ETDEWEB)

    Bronevetsky, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-17

    The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

  3. Microwave power engineering applications

    CERN Document Server

    Okress, Ernest C

    2013-01-01

    Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ioni

  4. Web applications quality assessment

    OpenAIRE

    Tamulynaitė, Donaira

    2017-01-01

    Web applications are becoming more and more popular. Web application quality may determine its success, however, there is no one generally accepted standard or quality model for web applications quality evaluation. The aim of this thesis is to provide a quality model for web applications. The constructed quality model is based on ISO Systems and software Quality evaluation standard, as well as on theoretical research results analysed in this topic. 18 web application characteristics have been...

  5. Ruby on Rails Applications

    Science.gov (United States)

    Hochstadt, Jake

    2011-01-01

    Ruby on Rails is an open source web application framework for the Ruby programming language. The first application I built was a web application to manage and authenticate other applications. One of the main requirements for this application was a single sign-on service. This allowed authentication to be built in one location and be implemented in many different applications. For example, users would be able to login using their existing credentials, and be able to access other NASA applications without authenticating again. The second application I worked on was an internal qualification plan app. Previously, the viewing of employee qualifications was managed through Excel spread sheets. I built a database driven application to streamline the process of managing qualifications. Employees would be able to login securely to view, edit and update their personal qualifications.

  6. Engineering Adaptive Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    . The different requirements might be satisfied by different variants of features maintained and provided by Web applications. An adaptive Web application can be seen as a family of Web applications where application instances are those generated for particular user based on his characteristics relevant...... for a domain.In this book, we propose a new domain engineering framework which extends a development process of Web applications with techniques required when designing such adaptive customizable Web applications. The framework is provided with design abstractions which deal separately with information served...

  7. Apprehensive about applications

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Current predictions for high Tc applications range from six months to twenty years, depending on the application. Many companies are also understandably reluctant to discuss the progress of proprietary work, which in all probability means that they are close to being able to produce a final product. Many researchers are claiming that they will have device applications ready in one to two years. But these applications will be demonstration prototypes and most will take many more years of engineering before they will become commercially viable applications, at which point they become dependant on economic factors, not performance factors, for their ultimate acceptance or ejection by the commercial marketplace. As in low Tc superconductivity, economics, not performance, may determine which applications are eventually successful. Military applications are discussed as being the first which will utilize high Tc materials, primarily through SQUIDS. Other possible applications, including electronics, wires, and microwave devices, are addressed

  8. AHA: Anagram Hashing Application

    NARCIS (Netherlands)

    Reynaert, Martin; Borin, Lars

    2016-01-01

    We briefly present AHA, the Anagram Hashing Application, a new web application and service that allows researchers to effortlessly analyse the lexical variation present in their Gold Standard data and to publish the results.

  9. Connected vehicle applications : safety.

    Science.gov (United States)

    2016-01-01

    Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure, vehicle-to-vehicle, : and vehicle-to-pedestrian data transmissions. Applications support advisor...

  10. Applicant Satisfaction Survey

    Data.gov (United States)

    Office of Personnel Management — The Chief Human Capital Officers developed 3 surveys that asks applicants to assess their satisfaction with the application process on a 1-10 point scale, with 10...

  11. Biomedical Applications of Graphene

    Science.gov (United States)

    Shen, He; Zhang, Liming; Liu, Min; Zhang, Zhijun

    2012-01-01

    Graphene exhibits unique 2-D structure and exceptional phyiscal and chemical properties that lead to many potential applications. Among various applications, biomedical applications of graphene have attracted ever-increasing interests over the last three years. In this review, we present an overview of current advances in applications of graphene in biomedicine with focus on drug delivery, cancer therapy and biological imaging, together with a brief discussion on the challenges and perspectives for future research in this field. PMID:22448195

  12. Nanoplasmonics advanced device applications

    CERN Document Server

    Chon, James W M

    2013-01-01

    Focusing on control and manipulation of plasmons at nanometer dimensions, nanoplasmonics combines the strength of electronics and photonics, and is predicted to replace existing integrated circuits and photonic devices. It is one of the fastest growing fields of science, with applications in telecommunication, consumer electronics, data storage, medical diagnostics, and energy.Nanoplasmonics: Advanced Device Applications provides a scientific and technological background of a particular nanoplasmonic application and outlines the progress and challenges of the application. It reviews the latest

  13. PoopMD, a Mobile Health Application, Accurately Identifies Infant Acholic Stools.

    Directory of Open Access Journals (Sweden)

    Amy Franciscovich

    Full Text Available Biliary atresia (BA is the leading cause of pediatric end-stage liver disease in the United States. Education of parents in the perinatal period with stool cards depicting acholic and normal stools has been associated with improved time-to-diagnosis and survival in BA. PoopMD is a mobile application that utilizes a smartphone's camera and color recognition software to analyze an infant's stool and determine if additional follow-up is indicated. PoopMD was developed using custom HTML5/CSS3 and wrapped to work on iOS and Android platforms. In order to define the gold standard regarding stool color, seven pediatricians were asked to review 45 photographs of infant stool and rate them as acholic, normal, or indeterminate. Samples for which 6+ pediatricians demonstrated agreement defined the gold standard, and only these samples were included in the analysis. Accuracy of PoopMD was assessed using an iPhone 5s with incandescent lighting. Variability in analysis of stool photographs as acholic versus normal with intermediate rating weighted as 50% agreement (kappa was compared between three laypeople and one expert user. Variability in output was also assessed between an iPhone 5s and a Samsung Galaxy S4, as well as between incandescent lighting and compact fluorescent lighting. Six-plus pediatricians agreed on 27 normal and 7 acholic photographs; no photographs were defined as indeterminate. The sensitivity was 7/7 (100%. The specificity was 24/27 (89% with 3/27 labeled as indeterminate; no photos of normal stool were labeled as acholic. The Laplace-smoothed positive likelihood ratio was 6.44 (95% CI 2.52 to 16.48 and the negative likelihood ratio was 0.13 (95% CI 0.02 to 0.83. kappauser was 0.68, kappaphone was 0.88, and kappalight was 0.81. Therefore, in this pilot study, PoopMD accurately differentiates acholic from normal color with substantial agreement across users, and almost perfect agreement across two popular smartphones and ambient light

  14. Application of an aqueous two-phase micellar system to extract bromelain from pineapple (Ananas comosus) peel waste and analysis of bromelain stability in cosmetic formulations.

    Science.gov (United States)

    Spir, Lívia Genovez; Ataide, Janaína Artem; De Lencastre Novaes, Letícia Celia; Moriel, Patrícia; Mazzola, Priscila Gava; De Borba Gurpilhares, Daniela; Silveira, Edgar; Pessoa, Adalberto; Tambourgi, Elias Basile

    2015-01-01

    Bromelain is a set of proteolytic enzymes found in pineapple (Ananas comosus) tissues such as stem, fruit and leaves. Because of its proteolytic activity, bromelain has potential applications in the cosmetic, pharmaceutical, and food industries. The present study focused on the recovery of bromelain from pineapple peel by liquid-liquid extraction in aqueous two-phase micellar systems (ATPMS), using Triton X-114 (TX-114) and McIlvaine buffer, in the absence and presence of electrolytes CaCl2 and KI; the cloud points of the generated extraction systems were studied by plotting binodal curves. Based on the cloud points, three temperatures were selected for extraction: 30, 33, and 36°C for systems in the absence of salts; 40, 43, and 46°C in the presence of KI; 24, 27, and 30°C in the presence of CaCl2 . Total protein and enzymatic activities were analyzed to monitor bromelain. Employing the ATPMS chosen for extraction (0.5 M KI with 3% TX-114, at pH 6.0, at 40°C), the bromelain extract stability was assessed after incorporation into three cosmetic bases: an anhydrous gel, a cream, and a cream-gel formulation. The cream-gel formulation presented as the most appropriate base to convey bromelain, and its optimal storage conditions were found to be 4.0 ± 0.5°C. The selected ATPMS enabled the extraction of a biomolecule with high added value from waste lined-up in a cosmetic formulation, allowing for exploration of further cosmetic potential. © 2015 American Institute of Chemical Engineers.

  15. SIMS applications workshop. Proceedings

    International Nuclear Information System (INIS)

    1997-04-01

    The first ANSTO/AINSE SIMS Workshop drew together a mixture of Surface Analysis experts and Surface Analysis users with the concept that SIMS analysis has to be enfolded within the spectrum of surface analysis techniques and that the user should select the technique most applicable to the problem. With this concept in mind the program was structured as sessions on SIMS Facilities; Applications to Mineral Surfaces; Applications to Biological Systems, Applications to Surfaces as Semi- conductors, Catalysts and Surface Coatings; and Applications to Ceramics

  16. SNS application programming plan

    International Nuclear Information System (INIS)

    Chu, C.M.; Galambos, J.D.; Wei, J.; Allen, C.; McGehee, P.M.; Malitsky, N.

    2001-01-01

    The plan for Spallation Neutron Source accelerator physics application programs is presented. These high level applications involve processing and managing information from the diagnostic instruments, the machine control system, models and static databases and will be used to investigate and control beam behavior. Primary components include an SNS global database and Java-based XAL Application Toolkit. A key element in the SNS application programs is time synchronization of data used in these applications, due to the short pulse (1 ms), pulsed (60 Hz) nature of the device. The data synchronization progress is also presented.

  17. Criteria for Social Applications

    DEFF Research Database (Denmark)

    Atzenbeck, Claus; Tzagarakis, Manolis

    2007-01-01

    relationships between individuals thus creating social networks. Although Web 2.0 applications are a popular and characteristic class of such applications they are not the only representatives that permit such functionality. Applications in the Personal Information Management domain exhibit similar......Social networks are becoming increasingly important for a wide number of applications. This is in particular true in the context of the Web 2.0 movement where a number of Web-based applications emerged - termed social networking applications or services - that allow the articulation of social...... characteristics but have never been mentioned in the context of social networking. The increasing number and diversity of such applications makes their study, analysis and evaluation from a systems point of view critical and important as their study may help identify relationships that are useful when attempting...

  18. Application of Genetic Algorithms for Driverless Subway Train Energy Optimization

    Directory of Open Access Journals (Sweden)

    Morris Brenna

    2016-01-01

    Full Text Available After an introduction on the basic aspects of electric railway transports, focusing mainly on driverless subways and their related automation systems (ATC, ATP, and ATO, a technique for energy optimization of the train movement through their control using genetic algorithms will be presented. Genetic algorithms are a heuristic search and iterative stochastic method used in computing to find exact or approximate solutions to optimization problems. This optimization process has been calculated and tested on a real subway line in Milan through the implementation of a dedicated Matlab code. The so-defined algorithm provides the optimization of the trains movement through a coast control table created by the use of a genetic algorithm that minimizes the energy consumption and the train scheduled time. The obtained results suggest that the method is promising in minimizing the energy consumption of the electric trains.

  19. Electronic Submissions of Pesticide Applications

    Science.gov (United States)

    Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

  20. Technical applications of aerogels

    International Nuclear Information System (INIS)

    Hrubesh, L.W.

    1997-01-01

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels

  1. Applications of Photocatalytic Disinfection

    Directory of Open Access Journals (Sweden)

    Joanne Gamage

    2010-01-01

    Full Text Available Due to the superior ability of photocatalysis to inactivate a wide range of harmful microorganisms, it is being examined as a viable alternative to traditional disinfection methods such as chlorination, which can produce harmful byproducts. Photocatalysis is a versatile and effective process that can be adapted for use in many applications for disinfection in both air and water matrices. Additionally, photocatalytic surfaces are being developed and tested for use in the context of “self-disinfecting” materials. Studies on the photocatalytic technique for disinfection demonstrate this process to have potential for widespread applications in indoor air and environmental health, biological, and medical applications, laboratory and hospital applications, pharmaceutical and food industry, plant protection applications, wastewater and effluents treatment, and drinking water disinfection. Studies on photocatalytic disinfection using a variety of techniques and test organisms are reviewed, with an emphasis on the end-use application of developed technologies and methods.

  2. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Univer...

  3. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Uni...

  4. Technical applications of aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  5. Assignment Tracking Android Application

    OpenAIRE

    Akanni, Feranmi Timothy

    2016-01-01

    One of the common ways of checking that knowledge is impacted into students at every level of education is by giving various tasks to students and part of the responsibilities of the teacher is to give assignments to students and check the solution provided by the students. Increase in technology development involves a number of mobile applications that are being developed and released on a daily basis, out of which Android operating application is one of the dominant mobile application. T...

  6. REST based mobile applications

    Science.gov (United States)

    Rambow, Mark; Preuss, Thomas; Berdux, Jörg; Conrad, Marc

    2008-02-01

    Simplicity is the major advantage of REST based webservices. Whereas SOAP is widespread in complex, security sensitive business-to-business aplications, REST is widely used for mashups and end-user centric applicatons. In that context we give an overview of REST and compare it to SOAP. Furthermore we apply the GeoDrawing application as an example for REST based mobile applications and emphasize on pros and cons for the use of REST in mobile application scenarios.

  7. Microcomputer interfacing and applications

    CERN Document Server

    Mustafa, M A

    1990-01-01

    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  8. Applications of combinatorial optimization

    CERN Document Server

    Paschos, Vangelis Th

    2013-01-01

    Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aims to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization. "Applications of Combinatorial Optimization" is presenting a certain number among the most common and well-known applications of Combinatorial Optimization.

  9. Refrigeration systems and applications

    CERN Document Server

    Dincer, Ibrahim

    2010-01-01

    Refrigeration Systems and Applications, 2nd edition offers a comprehensive treatise that addresses real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and the practical applications of refrigeration technology. New and unique analysis techniques (including exergy as a potential tool), models, correlations, procedures and applications are covered, and recent developments in the field are included - many of which are taken from the author's own research activities in this area. The book also includes so

  10. Application Layer Multicast

    Science.gov (United States)

    Allani, Mouna; Garbinato, Benoît; Pedone, Fernando

    An increasing number of Peer-to-Peer (P2P) Internet applications rely today on data dissemination as their cornerstone, e.g., audio or video streaming, multi-party games. These applications typically depend on some support for multicast communication, where peers interested in a given data stream can join a corresponding multicast group. As a consequence, the efficiency, scalability, and reliability guarantees of these applications are tightly coupled with that of the underlying multicast mechanism.

  11. Microprocessors principles and applications

    CERN Document Server

    Debenham, Michael J

    1979-01-01

    Microprocessors: Principles and Applications deals with the principles and applications of microprocessors and covers topics ranging from computer architecture and programmed machines to microprocessor programming, support systems and software, and system design. A number of microprocessor applications are considered, including data processing, process control, and telephone switching. This book is comprised of 10 chapters and begins with a historical overview of computers and computing, followed by a discussion on computer architecture and programmed machines, paying particular attention to t

  12. Support vector machines applications

    CERN Document Server

    Guo, Guodong

    2014-01-01

    Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

  13. Legacy application integration architecture

    OpenAIRE

    Grom, Jure

    2009-01-01

    Information needs of modern businesses are constantly growing. Own development of a business information system is time consuming and expensive but, as an alternative, using smaller partial solutions doesn’t cover all user needs. Decision to buy a universal solution, often results in only part of it being actively and efficiently used. By application integration we manage to achieve efficient use of applications, since by linking them, we enable sharing of business logics among applications a...

  14. AFRL POSS Applications Research

    National Research Council Canada - National Science Library

    Phillips, Shawn

    2002-01-01

    .... New applications are being investigated (e.g. batteries, capacitors, radomes). The technology transfer to Hybrid Plastics is a success story with significant volume increase and price reduction...

  15. Electrical applications 2

    CERN Document Server

    Tyler, David W

    1998-01-01

    Electrical Applications 2 covers the BTEC NII level objectives in Electrical Applications U86/330. To understand the applications, a knowledge of the underlying principles is needed and these are covered briefly in the text. Key topics discussed are: the transmission and distribution of electrical energy; safety and regulations; tariffs and power factor correction; materials and their applications in the electrical industry; transformers; DC machines; illumination; and fuse protection. Included in each chapter are worked examples which should be carefully worked through before progressing to t

  16. Nanotechnology in Aerospace Applications

    National Research Council Canada - National Science Library

    Meyyappan, M

    2007-01-01

    The aerospace applications for nanotechnology include high strength, low weight composites, improved electronics and displays with low power consumption, variety of physical sensors, multifunctional...

  17. Mongoose for application development

    CERN Document Server

    Holmes, Simon

    2013-01-01

    This book is a mini tutorial full of code examples and strategies to give you plenty of options when building your own applications with MongoDB.This book is ideal for people who want to develop applications on the Node.js stack quickly and efficiently. Prior knowledge of the stack is not essential as the book briefly covers the installation of the core components and builds all aspects of the example application. The focus of the book is on what Mongoose adds to you applications, so experienced Node.js developers will also benefit.

  18. Nanomaterials for Defense Applications

    Science.gov (United States)

    Turaga, Uday; Singh, Vinitkumar; Lalagiri, Muralidhar; Kiekens, Paul; Ramkumar, Seshadri S.

    Nanotechnology has found a number of applications in electronics and healthcare. Within the textile field, applications of nanotechnology have been limited to filters, protective liners for chemical and biological clothing and nanocoatings. This chapter presents an overview of the applications of nanomaterials such as nanofibers and nanoparticles that are of use to military and industrial sectors. An effort has been made to categorize nanofibers based on the method of production. This chapter particularly focuses on a few latest developments that have taken place with regard to the application of nanomaterials such as metal oxides in the defense arena.

  19. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  20. Hardening Azure applications

    CERN Document Server

    Gaurav, Suraj

    2015-01-01

    Learn what it takes to build large scale, mission critical applications -hardened applications- on the Azure cloud platform. This 208 page book covers the techniques and engineering principles that every architect and developer needs to know to harden their Azure/.NET applications to ensure maximum reliability and high availability when deployed at scale. While the techniques are implemented in .NET and optimized for Azure, the principles here will also be valuable for users of other cloud-based development platforms. Applications come in a variety of forms, from simple apps that can be bui

  1. Nanomaterials in biomedical applications

    DEFF Research Database (Denmark)

    Christiansen, Jesper de Claville; Potarniche, Catalina-Gabriela; Vuluga, Z.

    2011-01-01

    Advances in nano materials have lead to applications in many areas from automotive to electronics and medicine. Nano composites are a popular group of nano materials. Nanocomposites in medical applications provide novel solutions to common problems. Materials for implants, biosensors and drug del...

  2. Nanomaterials in biomedical applications

    DEFF Research Database (Denmark)

    Christiansen, Jesper de Claville; Potarniche, Catalina-Gabriela; Vuluga, Z.

    2011-01-01

    Advances in nano materials have lead to applications in many areas from automotive to electronics and medicine. Nano composites are a popular group of nano materials. Nanocomposites in medical applications provide novel solutions to common problems. Materials for implants, biosensors and drug...

  3. Neoglycoconjugates: preparation and applications

    National Research Council Canada - National Science Library

    Lee, Reiko T; Lee, Y. C

    1994-01-01

    ... and ApplicationsNeoglycoconjugates: Preparation and Applications Edited by Y. C. LEE Biology The Johns Baltimore, D e p a r t m e n t Hopkins University M a r y l a n d REIKO T. LEE Biology D e...

  4. Application Security Automation

    Science.gov (United States)

    Malaika, Majid A.

    2011-01-01

    With today's high demand for online applications and services running on the Internet, software has become a vital component in our lives. With every revolutionary technology comes challenges unique to its characteristics; for online applications, security is one huge concern and challenge. Currently, there are several schemes that address…

  5. Advertising on mobile applications

    OpenAIRE

    Sobolevsky, Alexandr

    2015-01-01

    The article analyzes the new method of mobile advertising. Advertising in mobile applications - a subspecies of mobile marketing, where advertising is distributed using mobile phones and smartphones. Ad placement is going on inside of applications and games for smartphones. It has a high potential due to the large number of mobile phone users (over 6.5 billion in 2013).

  6. Computer algebra applications

    International Nuclear Information System (INIS)

    Calmet, J.

    1982-01-01

    A survey of applications based either on fundamental algorithms in computer algebra or on the use of a computer algebra system is presented. Recent work in biology, chemistry, physics, mathematics and computer science is discussed. In particular, applications in high energy physics (quantum electrodynamics), celestial mechanics and general relativity are reviewed. (Auth.)

  7. Progressive Web applications

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Progressive Web Applications are native-like applications running inside of a browser context. In my presentation I would like describe their characteristics, benchmarks and building process using a quick and simple case study example with focus on Service Workers api.

  8. Connected vehicle application : safety.

    Science.gov (United States)

    2015-01-01

    Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure (V2I), vehicle-to-vehicle (V2V), and vehicle-to-pedestrian (V2P) data transmissions. Applications...

  9. Dilemmas in SEA application

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    Dilemmas in SEA Application: The DK Energy SectorIvar Lyhne - lyhne@plan.aau.dk. Based on three years of collaborative research, this paper outlines dilemmas in the application of SEA in the strategic development of the Danish energy sector. The dilemmas are based on concrete examples from practice...

  10. Applications of Evolutionary Computation

    NARCIS (Netherlands)

    Mora, Antonio M.; Squillero, Giovanni; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Smith, Stephen L; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Mora, Antonio M.; Squillero, Giovanni; Jan, Mathieu; Matthias, M; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Esparcia-Alcazar, Anna I; Silva, Sara; Agapitos, Alexandros; Cotta, Carlos; De Falco, Ivanoe; Cioppa, Antonio Della; Diwold, Konrad; Ekart, Aniko; Tarantino, Ernesto; Vega, Francisco Fernandez De; Burelli, Paolo; Sim, Kevin; Cagnoni, Stefano; Simoes, Anabela; Merelo, J.J.; Urquhart, Neil; Haasdijk, Evert; Zhang, Mengjie; Squillero, Giovanni; Eiben, A E; Tettamanzi, Andrea G B; Glette, Kyrre; Rohlfshagen, Philipp; Schaefer, Robert; Caserta, Marco; Ramirez, Adriana; Voß, Stefan

    2015-01-01

    The application of genetic and evolutionary computation to problems in medicine has increased rapidly over the past five years, but there are specific issues and challenges that distinguish it from other real-world applications. Obtaining reliable and coherent patient data, establishing the clinical

  11. Geometry and its applications

    CERN Document Server

    Meyer, Walter J

    2006-01-01

    Meyer''s Geometry and Its Applications, Second Edition, combines traditional geometry with current ideas to present a modern approach that is grounded in real-world applications. It balances the deductive approach with discovery learning, and introduces axiomatic, Euclidean geometry, non-Euclidean geometry, and transformational geometry. The text integrates applications and examples throughout and includes historical notes in many chapters. The Second Edition of Geometry and Its Applications is a significant text for any college or university that focuses on geometry''s usefulness in other disciplines. It is especially appropriate for engineering and science majors, as well as future mathematics teachers.* Realistic applications integrated throughout the text, including (but not limited to): - Symmetries of artistic patterns- Physics- Robotics- Computer vision- Computer graphics- Stability of architectural structures- Molecular biology- Medicine- Pattern recognition* Historical notes included in many chapters...

  12. Lasers Fundamentals and Applications

    CERN Document Server

    Thyagarajan, K

    2010-01-01

    Lasers: Fundamentals and Applications, serves as a vital textbook to accompany undergraduate and graduate courses on lasers and their applications. Ever since their invention in 1960, lasers have assumed tremendous importance in the fields of science, engineering and technology because of their diverse uses in basic research and countless technological applications. This book provides a coherent presentation of the basic physics behind the way lasers work, and presents some of their most important applications in vivid detail. After reading this book, students will understand how to apply the concepts found within to practical, tangible situations. This textbook includes worked-out examples and exercises to enhance understanding, and the preface shows lecturers how to most beneficially match the textbook with their course curricula. The book includes several recent Nobel Lectures, which will further expose students to the emerging applications and excitement of working with lasers. Students who study lasers, ...

  13. Applications of ionizing radiations

    International Nuclear Information System (INIS)

    2014-01-01

    Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques

  14. GPU computing and applications

    CERN Document Server

    See, Simon

    2015-01-01

    This book presents a collection of state of the art research on GPU Computing and Application. The major part of this book is selected from the work presented at the 2013 Symposium on GPU Computing and Applications held in Nanyang Technological University, Singapore (Oct 9, 2013). Three major domains of GPU application are covered in the book including (1) Engineering design and simulation; (2) Biomedical Sciences; and (3) Interactive & Digital Media. The book also addresses the fundamental issues in GPU computing with a focus on big data processing. Researchers and developers in GPU Computing and Applications will benefit from this book. Training professionals and educators can also benefit from this book to learn the possible application of GPU technology in various areas.

  15. Mobile Learning Applications Audit

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2010-01-01

    Full Text Available While mobile learning (m-learning applications have proven their value in educational activities, there is a need to measure their reliability, accessibility and further more their trustworthiness. Mobile devices are far more vulnerable then classic computers and present inconvenient interfaces due to their size, hardware limitations and their mobile connectivity. Mobile learning applications should be audited to determine if they should be trusted or not, while multimedia contents like automatic speech recognition (ASR can improve their accessibility. This article will start with a brief introduction on m-learning applications, then it will present the audit process for m-learning applications, it will iterate their specific security threats, it will define the ASR process, and it will elaborate how ASR can enhance accessibility of these types of applications.

  16. Database Application Schema Forensics

    Directory of Open Access Journals (Sweden)

    Hector Quintus Beyers

    2014-12-01

    Full Text Available The application schema layer of a Database Management System (DBMS can be modified to deliver results that may warrant a forensic investigation. Table structures can be corrupted by changing the metadata of a database or operators of the database can be altered to deliver incorrect results when used in queries. This paper will discuss categories of possibilities that exist to alter the application schema with some practical examples. Two forensic environments are introduced where a forensic investigation can take place in. Arguments are provided why these environments are important. Methods are presented how these environments can be achieved for the application schema layer of a DBMS. A process is proposed on how forensic evidence should be extracted from the application schema layer of a DBMS. The application schema forensic evidence identification process can be applied to a wide range of forensic settings.

  17. MILANO ARCHEOLOGIA FOR EXPO 2015. TOWARDS A VALORIZATION OF THE ARCHAEOLOGICAL HERITAGE OF THE CITY OF MILAN

    Directory of Open Access Journals (Sweden)

    Daniela Massara

    2015-06-01

    Full Text Available Si pubblicano qui le relazioni presentate durante il seminario interdisciplinare e interateneo dal titolo “Milano Archeologia per Expo 2015. Verso una valorizzazione del patrimonio archeologico della città di Milano”. Il seminario è stato organizzato come parte integrante del progetto “Milano Archeologia per Expo 2015”, avviato nel 2013, il quale ha avuto tra i suoi scopi quello di incrementare conoscenza, consapevolezza e quindi visibilità dei resti della Milano romana attraverso specifici strumenti di didattica e divulgazione. Il workshop si pone infatti a conclusione di un percorso destinato in particolare ai milanesi ed esteso a tutti gli interessati, condotto durante tutta la durata del progetto. Ne sono un esempio le conferenze svoltesi al Civico Museo Archeologico di Milano: giovani studiosi hanno presentato a un pubblico non specialistico i risultati delle loro ricerche su Mediolanum; la locandina del programma delle conferenze testimonia la varietà dei temi trattati.

  18. Setup of a sustainable indoor cleaning methodology for the sculpted stone surfaces of the Duomo of Milan

    OpenAIRE

    Gulotta, Davide; Saviello, Daniela; Gherardi, Francesca; Toniolo, Lucia; Anzani, Marilena; Rabbolini, Alfiero; Goidanich, Sara

    2014-01-01

    Cleaning is a fundamental phase of the conservation and maintenance activity of the cultural heritage. It is required to be highly effective in the removal of undesired deposits, controllable at every stage and gradable, selective, and completely respectful of the substrate. Moreover, cleaning procedures which can also assure to be harmless to the environment and the operators are particularly valued nowadays. According to these general guidelines, in the present work a sustainable approach f...

  19. Gas sensing method applicable to real conditions

    Science.gov (United States)

    Szczurek, A.; Maciejewska, M.

    2013-04-01

    In this work, we tested the influence of various sampling techniques and modes of operation on the response of sensor systems under real conditions. The first system was based on diffusive sampling. The second one used a dynamic method of sampling. In the third system, a stop flow mode of operation was applied. A considerable error of target gas concentration assessment was obtained in the first two cases. The error resulted from sensor signal fluctuations encountered during their exposure either to the air at the measurement point (diffusive sampling) or to the air drawn from the measurement point (dynamic sampling). The fluctuations could be attributed to the temporal variation of physical and chemical parameters of air. The main merit of the third method consists in utilizing sensor exposure under the conditions of stopped flow for the purpose of pollutant concentration assessment. While using this method, the accuracy of target gas quantification under real conditions was comparable to the one achieved when measuring standard gases. We think that the proposed method is a valuable contribution, which addresses the increasing demand for sensor systems that perform quantitative pollution assessment in workplace air, under real conditions. This paper was presented at the Conference on Optoelectronic and Electronic Sensors held in Karpacz, Poland, on 24-27 June 2012.

  20. Building Social Web Applications

    CERN Document Server

    Bell, Gavin

    2009-01-01

    Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

  1. Wind energy applications guide

    Energy Technology Data Exchange (ETDEWEB)

    anon.

    2001-01-01

    The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.

  2. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2017-01-01

    The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

  3. Developing Large Web Applications

    CERN Document Server

    Loudon, Kyle

    2010-01-01

    How do you create a mission-critical site that provides exceptional performance while remaining flexible, adaptable, and reliable 24/7? Written by the manager of a UI group at Yahoo!, Developing Large Web Applications offers practical steps for building rock-solid applications that remain effective even as you add features, functions, and users. You'll learn how to develop large web applications with the extreme precision required for other types of software. Avoid common coding and maintenance headaches as small websites add more pages, more code, and more programmersGet comprehensive soluti

  4. Professional Tizen application development

    CERN Document Server

    Jaygarl, HoJun; Kim, YoonSoo; Choi, Eunyoung; Bradwick, Kevin; Lansdell

    2014-01-01

    Create powerful, marketable applications with Tizen for the smartphone and beyond  Tizen is the only platform designed for multiple device categories that is HTML5-centric and entirely open source. Written by experts in the field, this comprehensive guide includes chapters on both web and native application development, covering subjects such as location and social features, advanced UIs, animations, sensors and multimedia. This book is a comprehensive resource for learning how to develop Tizen web and native applications that are polished, bug-free and ready to sell on a range of smart dev

  5. Biomaterials and therapeutic applications

    Science.gov (United States)

    Ferraro, Angelo

    2016-03-01

    A number of organic and inorganic, synthetic or natural derived materials have been classified as not harmful for the human body and are appropriate for medical applications. These materials are usually named biomaterials since they are suitable for introduction into living human tissues of prosthesis, as well as for drug delivery, diagnosis, therapies, tissue regeneration and many other clinical applications. Recently, nanomaterials and bioabsorbable polymers have greatly enlarged the fields of application of biomaterials attracting much more the attention of the biomedical community. In this review paper I am going to discuss the most recent advances in the use of magnetic nanoparticles and biodegradable materials as new biomedical tools.

  6. Superconductivity and its application

    International Nuclear Information System (INIS)

    Spadoni, M.

    1988-01-01

    This paper, after a short introduction to superconductivity and to multifilamentary superconducting composites is aiming to review the state of the art and the future perspective of some of the applications of the superconducting materials. The main interest is focussed to large scale applications like, for istance, magnets for accelerators or fusion reactors, superconducting system for NMR thomography, etc. A short paragraph is dedicated to applications for high sensitivity instrumentation. The paper is then concluded by some considerations about the potentialities of the newly discovered high critical temperature materials

  7. Android Applications Security

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2011-01-01

    Full Text Available The use of smartphones worldwide is growing very fast and also the malicious attacks have increased. The mobile security applications development keeps the pace with this trend. The paper presents the vulnerabilities of mobile applications. The Android applications and devices are analyzed through the security perspective. The usage of restricted API is also presented. The paper also focuses on how users can prevent these malicious attacks and propose some prevention measures, including the architecture of a mobile security system for Android devices.

  8. The application of RFQs

    International Nuclear Information System (INIS)

    Schempp, A.

    1992-01-01

    The Radio Frequency Quadrupole Accelerator (RFQ) has found wide application, not only as the preinjector linac for new high energy light ion accelerators but also in a variety of other projects. Progress in development has made ion linacs practical for medical and industrial applications including radiation therapy, isotope and neutron production, material modification and ion beam diagnostic. The paper discusses various projects together with applications in science where RFQs serve as stand-alone tools, for example for the calibration of detectors, as decelerators or as small compact beam sources for atomic physics and materials research. (Author) 7 figs., 40 refs

  9. Professional mobile application development

    CERN Document Server

    McWherter, Jeff

    2012-01-01

    Create applications for all major smartphone platforms Creating applications for the myriad versions and varieties of mobile phone platforms on the market can be daunting to even the most seasoned developer. This authoritative guide is written in such as way that it takes your existing skills and experience and uses that background as a solid foundation for developing applications that cross over between platforms, thereby freeing you from having to learn a new platform from scratch each time. Concise explanations walk you through the tools and patterns for developing for all the mobile platfo

  10. Professional Cocoa Application Security

    CERN Document Server

    Lee, Graham J

    2010-01-01

    The first comprehensive security resource for Mac and iPhone developers. The Mac platform is legendary for security, but consequently, Apple developers have little appropriate security information available to help them assure that their applications are equally secure. This Wrox guide provides the first comprehensive go-to resource for Apple developers on the available frameworks and features that support secure application development.: While Macs are noted for security, developers still need to design applications for the Mac and the iPhone with security in mind; this guide offers the first

  11. Biomedical applications of polymers

    CERN Document Server

    Gebelein, C G

    1991-01-01

    The biomedical applications of polymers span an extremely wide spectrum of uses, including artificial organs, skin and soft tissue replacements, orthopaedic applications, dental applications, and controlled release of medications. No single, short review can possibly cover all these items in detail, and dozens of books andhundreds of reviews exist on biomedical polymers. Only a few relatively recent examples will be cited here;additional reviews are listed under most of the major topics in this book. We will consider each of the majorclassifications of biomedical polymers to some extent, inclu

  12. Excimer laser applications

    International Nuclear Information System (INIS)

    Fantoni, R.

    1988-01-01

    This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

  13. Express web application development

    CERN Document Server

    Yaapa, Hage

    2013-01-01

    Express Web Application Development is a practical introduction to learning about Express. Each chapter introduces you to a different area of Express, using screenshots and examples to get you up and running as quickly as possible.If you are looking to use Express to build your next web application, ""Express Web Application Development"" will help you get started and take you right through to Express' advanced features. You will need to have an intermediate knowledge of JavaScript to get the most out of this book.

  14. Lift application development cookbook

    CERN Document Server

    Garcia, Gilberto T

    2013-01-01

    Lift Application Development Cookbook contains practical recipes on everything you will need to create secure web applications using this amazing framework.The book first teaches you basic topics such as starting a new application and gradually moves on to teach you advanced topics to achieve a certain task. Then, it explains every step in detail so that you can build your knowledge about how things work.This book is for developers who have at least some basic knowledge about Scala and who are looking for a functional, secure, and modern web framework. Prior experience with HTML and JavaScript

  15. User Types in Online Applications

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2011-08-01

    Full Text Available Online applications are presented in the context of information society. Online applications characteristics are analyzed. Quality characteristics are presented in relation to online applications users. Types of users for AVIO application are presented. Use cases for AVIO application are identified. The limitations of AVIO application are defined. Types of users in online applications are identified. The threedimensional matrix of access to the online application resources is built. The user type-oriented database is structured. Access management of the fields related to the database tables is analyzed. The classification of online applications users is done.

  16. Thermodynamics foundations and applications

    CERN Document Server

    Gyftopoulos, Elias P

    2005-01-01

    Designed by two MIT professors, this authoritative text discusses basic concepts and applications in detail, emphasizing generality, definitions, and logical consistency. More than 300 solved problems cover realistic energy systems and processes.

  17. Capital Projects Application (CPA)

    Data.gov (United States)

    General Services Administration — Capital Projects application (CPA) provides users with the ability to maintain project related financial data for Budget Activity (BA) 51, 55, 64, 01, 02, 03, 04....

  18. Food Applications and Regulation

    Science.gov (United States)

    Gálvez, Antonio; Abriouel, Hikmate; Omar, Nabil Ben; Lucas, Rosario

    This chapter deals with food applications of bacteriocins. Regulatory issues on the different possibilities for incorporating bacteriocins as bioprotectants are discussed. Specific applications of bacteriocins or bacteriocin-producing strains are described for main food categories, including milk and dairy products, raw meats, ready-to-eat meat and poultry products, fermented meats, fish and fish products or fermented fish. The last section of the chapter deals with applications in foods and beverages derived from plant materials, such as raw vegetable foods, fruits and fruit juices, cooked food products, fermented vegetable foods and ­fermented beverages. Results obtained for application of bacteriocins in combination with other hurdles are also discussed for each specific case, with a special emphasis on novel food packaging and food-processing technologies, such as irradiation, pulsed electric field treatments or high hydrostatic pressure treatment.

  19. Nuclear Technology applications

    International Nuclear Information System (INIS)

    Cibils Machado, W. E- mail: wrcibils@adinet.com.uy

    2002-01-01

    The present work tries on the applications of the nuclear technology in the life daily, such as agriculture and feeding, human health, industry, non destructive essays, isotopic hydrology, and the nuclear power stations for electricity production and radioisotopes production

  20. Industrial applications of radiochemistry

    International Nuclear Information System (INIS)

    Kobayashi, Masatoshi

    1979-01-01

    The industrial application of radiochemistry is summarized, mainly in regard to the application of tracers and activation analysis. Changes in the utilization of radioisotopes in Japan are quoted according to the statistics of the Japan Information Center of Science and Technology (JICST) and reports of the Japan Isotope Conference since 1956. In order to clarify the application of industrial tracers, especially physical tracers in the manufacturing process, serial changes in the concentration of radioactive tracers retained in a bath and in Hg in a soda factory were determined. A radiorelease method used for analysis of exhaust fumes from automobiles is introduced and purification of Al by means by activation analysis, which is used to analyze extremely small amounts of impurities in highly pure materials, is described. Also, application of 252 Cf for activation analysis and its legal intricacies are discussed. (Namekawa, K.)

  1. Condom application - slideshow

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/presentations/100109.htm Condom application - series—Procedure, part 1 To use the ... Go to slide 3 out of 3 Overview Condoms are made of latex rubber, polyurethane or lamb ...

  2. Special functions & their applications

    CERN Document Server

    Lebedev, N N

    1972-01-01

    Famous Russian work discusses the application of cylinder functions and spherical harmonics; gamma function; probability integral and related functions; Airy functions; hyper-geometric functions; more. Translated by Richard Silverman.

  3. Thermoluminescence and their applications

    International Nuclear Information System (INIS)

    Rodrigues, G.V.

    1986-01-01

    The theory involved in the phenomenon of thermoluminescence emission, the characteristics of the main thermoluminescent phosphorus and some of their applications are presented. Some of the main thermoluminescent dosemeters used in dosimetry are described. (M.C.K.) [pt

  4. Designing Adaptive Web Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    2008-01-01

    Learning system to study a discipline. In business to business interaction, different requirements and parameters of exchanged business requests might be served by different services from third parties. Such applications require certain intelligence and a slightly different approach to design. Adpative web......The unique characteristic of web applications is that they are supposed to be used by much bigger and diverse set of users and stakeholders. An example application area is e-Learning or business to business interaction. In eLearning environment, various users with different background use the e......-based applications aim to leave some of their features at the design stage in the form of variables which are dependent on several criteria. The resolution of the variables is called adaptation and can be seen from two perspectives: adaptation by humans to the changed requirements of stakeholders and dynamic system...

  5. Applications of decelerated ions

    International Nuclear Information System (INIS)

    Johnson, B.M.

    1985-03-01

    Many facilities whose sole purpose had been to accelerate ion beams are now becoming decelerators as well. The development and current status of accel-decel operations is reviewed here. Applications of decelerated ions in atomic physics experiments are discussed

  6. Microtron for radiation applications

    International Nuclear Information System (INIS)

    Soni, H.C.; Ramamurthi, S.S.

    1993-01-01

    The electron accelerator called microtron is a powerful tool for research, medical and industrial applications which need electron beam in energy range of few tens of MeV. Either electron beam from microtron is directly used for radiation applications or electron beam is utilized to produce x-rays or neutrons which are eventually used for radiation applications. After considering the vast potential, lower cost, simpler construction and excellent quality of electron beam from microtron, it was decided to develop this machine at Centre for Advanced Technology (CAT). The microtrons in two standard models have been developed which will cover all the above mentioned applications except free electron lasers. The microtron of model 1 provides electron beam of 20 MeV, 15/30 mA and that of model 2 provides electron beam of 8/12 MeV, 50/30 mA. (author). 2 figs., 1 tab

  7. Applications of Clustering

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Applications of Clustering. Biology – medical imaging, bioinformatics, ecology, phylogenies problems etc. Market research. Data Mining. Social Networks. Any problem measuring similarity/correlation. (dimensions represent different parameters)

  8. Neutron sources and applications

    Energy Technology Data Exchange (ETDEWEB)

    Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

    1994-01-01

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

  9. Neutron sources and applications

    International Nuclear Information System (INIS)

    Price, D.L.; Rush, J.J.

    1994-01-01

    Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications

  10. Thermoluminescence and applications

    International Nuclear Information System (INIS)

    Rodrigues, G.V.

    1986-01-01

    The theory of thermoluminescent emission, the characteristics of main thermoluminescent phosphorus, and some applications are presented. The main thermoluminescent dosemeters used in dosimetry are related. (M.C.K.)

  11. Engineering Adaptive Web Applications

    DEFF Research Database (Denmark)

    Dolog, Peter

    2007-01-01

    Information and services on the web are accessible for everyone. Users of the web differ in their background, culture, political and social environment, interests and so on. Ambient intelligence was envisioned as a concept for systems which are able to adapt to user actions and needs....... With the growing amount of information and services, the web applications become natural candidates to adopt the concepts of ambient intelligence. Such applications can deal with divers user intentions and actions based on the user profile and can suggest the combination of information content and services which...... suit the user profile the most. This paper summarizes the domain engineering framework for such adaptive web applications. The framework provides guidelines to develop adaptive web applications as members of a family. It suggests how to utilize the design artifacts as knowledge which can be used...

  12. Wordpress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2015-01-01

    This book is intended for WordPress developers and designers who want to develop quality web applications within a limited time frame and for maximum profit. Prior knowledge of basic web development and design is assumed.

  13. Pedal Application Errors

    Science.gov (United States)

    2012-03-01

    This project examined the prevalence of pedal application errors and the driver, vehicle, roadway and/or environmental characteristics associated with pedal misapplication crashes based on a literature review, analysis of news media reports, a panel ...

  14. BIOSENSORS FOR ENVIRONMENTAL APPLICATIONS

    Science.gov (United States)

    A review, with 19 references, is given on challenges and possible opportunities for the development of biosensors for environmental monitoring applications. The high cost and slow turnaround times typically associated with the measurement of regulated pollutants clearly indicates...

  15. 76 FR 60836 - Applicants

    Science.gov (United States)

    2011-09-30

    .... Safeway Global Shipping LLC (NVO), 9630 Clarewood Street, Building D6, Houston, TX 77054, Officers...), Margaret J. Zimmer, President, Application Type: Add NVO Service. ] Zur-Go, Inc (NVO & OFF), 6907 NW., 82nd...

  16. Evolution of Mobile Applications

    Directory of Open Access Journals (Sweden)

    Phongtraychack Anachack

    2018-01-01

    Full Text Available Currently, we can see the rapid evolution of mobile technology, which involves mobile communication, mobile hardware, and mobile software. Features of mobile phones largely depend on software. In contemporary information and communication age [1–4], mobile application is one of the most concerned and rapidly developing areas. At the same time, the development of mobile application undergoes great changes with the introduction of new software, service platforms and software development kits (SDK. These changes lead to appearance of many new service platforms such as Google with Android and Apple with iOS. This article presents the information about the evolution of mobile application, gives some statistical data on the past and present situation, demonstrates how individual users of mobile devices can benefit, and shows how mobile applications affect society from the ethical perspective.

  17. Photovoltaic systems and applications

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

  18. Applications for alliform carbon

    Energy Technology Data Exchange (ETDEWEB)

    Gogotsi, Yury; Mochalin, Vadym; McDonough, IV, John Kenneth; Simon, Patrice; Taberna, Pierre Louis

    2017-02-21

    This invention relates to novel applications for alliform carbon, useful in conductors and energy storage devices, including electrical double layer capacitor devices and articles incorporating such conductors and devices. Said alliform carbon particles are in the range of 2 to about 20 percent by weight, relative to the weight of the entire electrode. Said novel applications include supercapacitors and associated electrode devices, batteries, bandages and wound healing, and thin-film devices, including display devices.

  19. Industrial Robot Label Applicator

    OpenAIRE

    Kukasch, Kai

    2017-01-01

    The thesis deals with a project carried out for developing and setting up a robot label applicator system. The requirement was that RFID tracking labels can be applied on flexible positions, without manual effort and rearrangement, via programming. The purpose of the robot label applicator system is to increase the efficiency in production sites, where the RFID label position can change, depending on product or other reasons. New label positions should be programmed easily with a human-m...

  20. Superconductivity and their applications

    OpenAIRE

    Roque, António

    2017-01-01

    Trabalho apresentado em International Conference on Renewable Energies and Power Quality (ICREPQ’17), 4 a 6 de Abril de 2017, Málaga, Espanha The research in the field of superconductivity has led to the synthesis of superconducting materials with features that allow you to expand the applicability of this kind of materials. Among the superconducting materials characteristics, the critical temperature of the superconductor is framing the range and type of industrial applications that can b...

  1. Formal groups and applications

    CERN Document Server

    Hazewinkel, Michiel

    2012-01-01

    This book is a comprehensive treatment of the theory of formal groups and its numerous applications in several areas of mathematics. The seven chapters of the book present basics and main results of the theory, as well as very important applications in algebraic topology, number theory, and algebraic geometry. Each chapter ends with several pages of historical and bibliographic summary. One prerequisite for reading the book is an introductory graduate algebra course, including certain familiarity with category theory.

  2. Magnesium motorcycle applications

    International Nuclear Information System (INIS)

    Jianyong Cao; Zonghe Zhang; Dongxia Xiang; Jun Wang

    2005-01-01

    Magnesium, the lightest engineering structural metal, has been comprehensively used in castings of aviation and aerospace, communication and transportation, and IT components. This paper introduced the history, advantages and difficulties of magnesium castings for motorcycle application as well as its application state in China. It also indicated the production situation of magnesium motorcycle components in CQMST and difficulties need to overcome for further development. (orig.)

  3. Superconductor electronic device applications

    International Nuclear Information System (INIS)

    VanDuzer, T.

    1989-01-01

    Superconductors are becoming important in many applications where high sensitivity or speed is required. In this paper the authors give brief introduction to superconductive device physics and some comments on the role of high-temperature superconductors. They then present the basic principles of a number of applications in metrology, electromagnetic sensing, and analog and digital circuits. They conclude with the prospects for hybrid semiconductor-superconductor devices, circuits, and systems

  4. Applications of Genetic Programming

    DEFF Research Database (Denmark)

    Gaunholt, Hans; Toma, Laura

    1996-01-01

    In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc.......In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc....

  5. Applications of Nuclear Physics

    OpenAIRE

    Hayes, Anna C.

    2017-01-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that und...

  6. Modelling Foundations and Applications

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 8th European Conference on Modelling Foundations and Applications, held in Kgs. Lyngby, Denmark, in July 2012. The 20 revised full foundations track papers and 10 revised full applications track papers presented were carefully reviewed......, as well as the high quality of the results presented in these accepted papers, demonstrate the maturity and vibrancy of the field....

  7. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  8. Radioisotopes production and applications

    International Nuclear Information System (INIS)

    Dash, Ashutosh

    2015-01-01

    Application of radioisotopes for both medical and industrial applications constitutes one of the most important peaceful uses of atomic energy. The striking diffusion and the exciting perspective of radioisotope for a plethora of medical and industrial applications are mainly attributable to the penetrating and ionization properties of radiation emanating from radioisotopes. The revolutionary medical applications of radioisotopes for the diagnosis and treatment of a multitude of diseases are causing a rapid expansion of the nuclear medicine field. While the industrial uses of radioisotopes are not expanding as quickly, also require large amounts of radioisotopes. Production of radioisotopes is not only the first step, but also the most crucial for the success as well as sustainable growth of radioisotope applications. With the rapid growth and expanding areas of applications, the demands for isotopes have increased several folds. A number of radioisotopes of different physical half-life, energy of the particle or gamma emission, specific activity and chemistry are now regularly produced both at commercial centers as well as at selected nuclear science research institutes utilizing reactors and cyclotrons to meet the ever growing need

  9. LCS Content Document Application

    Science.gov (United States)

    Hochstadt, Jake

    2011-01-01

    My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

  10. Nonlinear Optics and Applications

    Science.gov (United States)

    Abdeldayem, Hossin A. (Editor); Frazier, Donald O. (Editor)

    2007-01-01

    Nonlinear optics is the result of laser beam interaction with materials and started with the advent of lasers in the early 1960s. The field is growing daily and plays a major role in emerging photonic technology. Nonlinear optics play a major role in many of the optical applications such as optical signal processing, optical computers, ultrafast switches, ultra-short pulsed lasers, sensors, laser amplifiers, and many others. This special review volume on Nonlinear Optics and Applications is intended for those who want to be aware of the most recent technology. This book presents a survey of the recent advances of nonlinear optical applications. Emphasis will be on novel devices and materials, switching technology, optical computing, and important experimental results. Recent developments in topics which are of historical interest to researchers, and in the same time of potential use in the fields of all-optical communication and computing technologies, are also included. Additionally, a few new related topics which might provoke discussion are presented. The book includes chapters on nonlinear optics and applications; the nonlinear Schrodinger and associated equations that model spatio-temporal propagation; the supercontinuum light source; wideband ultrashort pulse fiber laser sources; lattice fabrication as well as their linear and nonlinear light guiding properties; the second-order EO effect (Pockels), the third-order (Kerr) and thermo-optical effects in optical waveguides and their applications in optical communication; and, the effect of magnetic field and its role in nonlinear optics, among other chapters.

  11. Applications of Cell Microencapsulation.

    Science.gov (United States)

    Opara, Emmanuel C

    2017-01-01

    The goal of this chapter is to provide an overview of the different purposes for which the cell microencapsulation technology can be used. These include immunoisolation of non-autologous cells used for cell therapy; immobilization of cells for localized (targeted) delivery of therapeutic products to ablate, repair, or regenerate tissue; simultaneous delivery of multiple therapeutic agents in cell therapy; spatial compartmentalization of cells in complex tissue engineering; expansion of cells in culture; and production of different probiotics and metabolites for industrial applications. For each of these applications, specific examples are provided to illustrate how the microencapsulation technology can be utilized to achieve the purpose. However, successful use of the cell microencapsulation technology for whatever purpose will ultimately depend upon careful consideration for the choice of the encapsulating polymers, the method of fabrication (cross-linking) of the microbeads, which affects the permselectivity, the biocompatibility and the mechanical strength of the microbeads as well as environmental parameters such as temperature, humidity, osmotic pressure, and storage solutions.The various applications discussed in this chapter are illustrated in the different chapters of this book and where appropriate relevant images of the microencapsulation products are provided. It is hoped that this outline of the different applications of cell microencapsulation would provide a good platform for tissue engineers, scientists, and clinicians to design novel tissue constructs and products for therapeutic and industrial applications.

  12. Discrete mathematics with applications

    CERN Document Server

    Koshy, Thomas

    2003-01-01

    This approachable text studies discrete objects and the relationsips that bind them. It helps students understand and apply the power of discrete math to digital computer systems and other modern applications. It provides excellent preparation for courses in linear algebra, number theory, and modern/abstract algebra and for computer science courses in data structures, algorithms, programming languages, compilers, databases, and computation.* Covers all recommended topics in a self-contained, comprehensive, and understandable format for students and new professionals * Emphasizes problem-solving techniques, pattern recognition, conjecturing, induction, applications of varying nature, proof techniques, algorithm development and correctness, and numeric computations* Weaves numerous applications into the text* Helps students learn by doing with a wealth of examples and exercises: - 560 examples worked out in detail - More than 3,700 exercises - More than 150 computer assignments - More than 600 writing projects*...

  13. Optimized packings with applications

    CERN Document Server

    Pintér, János

    2015-01-01

    This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...

  14. Radioisotope applications in industry

    International Nuclear Information System (INIS)

    Frevert, E.

    1983-03-01

    The practical applications of the isotope technique are reported and illustrated by examples of works of the Department of Isotope Application of the Austrian Research Centre Seibersdorf. First the field of process controlling device and controll is described, including thickness, density and moisture gauging, the estimation of coatings and material compounds, the location of material defects and the level control. After this a detailed description of all kinds of tracer investigations is given like measurements of flow rate, intermixture, distribution and volume, investigations of corrosion, wear and lubrication and locations of all kind. A short description of gas ionisation, sources of light and isotope batteries is mentioned. Finally a general view of the applications in the fields of chemistry, biology, agriculture and medicine and the most important of the Austrian law of protective screen and its enactment are given. (Author) [de

  15. Applications of photovoltaics

    International Nuclear Information System (INIS)

    Pearsall, N.

    1999-01-01

    The author points out that although photovoltaics can be used for generating electricity for the same applications as many other means of generation, they really come into their own where disadvantages associated with an intermittent unpredictable supply are not severe. The paper discusses the advantages and disadvantages to be taken into account when considering a photovoltaic power system. Five main applications, based on the system features, are listed and explained. They are: consumer, professional, rural electrification, building-integrated, centralised grid connected and space power. A brief history of the applications of photovoltaics is presented with statistical data on the growth of installed capacity since 1992. The developing market for photovoltaics is discussed together with how environmental issues have become a driver for development of building-integrated photovoltaics

  16. Applications of interval computations

    CERN Document Server

    Kreinovich, Vladik

    1996-01-01

    Primary Audience for the Book • Specialists in numerical computations who are interested in algorithms with automatic result verification. • Engineers, scientists, and practitioners who desire results with automatic verification and who would therefore benefit from the experience of suc­ cessful applications. • Students in applied mathematics and computer science who want to learn these methods. Goal Of the Book This book contains surveys of applications of interval computations, i. e. , appli­ cations of numerical methods with automatic result verification, that were pre­ sented at an international workshop on the subject in EI Paso, Texas, February 23-25, 1995. The purpose of this book is to disseminate detailed and surveyed information about existing and potential applications of this new growing field. Brief Description of the Papers At the most fundamental level, interval arithmetic operations work with sets: The result of a single arithmetic operation is the set of all possible results as the o...

  17. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Gregg, C.T.

    1977-01-01

    Clinical applications include the galactose breath test which consists of oral administration of 13 C-labeled galactose and measurement of the 13 C content of respired CO 2 as a function of time in patients with cirrhotic livers for diagnosis of liver dysfunction. Another application was the breath test to study glucose metabolism in children. Respired 13 CO 2 from ingested glucose- 13 C was measured for normal and diabetic children. Studies on mice in which 60 percent of the body carbon was replaced with 13 C failed to show significant effects of the isotope. Studies on biochemical applications include nuclear magnetic resonance studies of 13 C-labeled amino acids from Chlorella pyrenoidosa; studies on 15 N nmr spectra of arginine-guanidino- 13 C-2,3-- 15 N 2 as a function of pH; and isolation of fatty acids from algae

  18. Practical applications of phosphors

    CERN Document Server

    Yen, William M; Yamamoto, Hajime

    2006-01-01

    Drawn from the second edition of the best-selling Phosphor Handbook, Practical Applications of Phosphors outlines methods for the production of various phosphors and discusses a broad spectrum of applications. Beginning with methods for synthesis and related technologies, the book sets the stage by classifying and then explaining practical phosphors according to usage. It describes the operating principle and structure of phosphor devices and the phosphor characteristics required for a given device, then covers the manufacturing processes and characteristics of phosphors. The book discusses research and development currently under way on phosphors with potential for practical usage and touches briefly on phosphors that have played a historical role, but are no longer of practical use. It provides a comprehensive treatment of applications including lamps and cathode-ray tubes, x-ray and ionizing radiation, and for vacuum fluorescent and field emission displays and covers inorganic and organic electroluminescen...

  19. Engineering Web Applications

    DEFF Research Database (Denmark)

    Casteleyn, Sven; Daniel, Florian; Dolog, Peter

    Nowadays, Web applications are almost omnipresent. The Web has become a platform not only for information delivery, but also for eCommerce systems, social networks, mobile services, and distributed learning environments. Engineering Web applications involves many intrinsic challenges due...... design and implementation to deployment and maintenance. They stress the importance of models in Web application development, and they compare well-known Web-specific development processes like WebML, WSDM and OOHDM to traditional software development approaches like the waterfall model and the spiral...... model. Important problem areas inherent to the Web, like localization, personalization, accessibility, and usage analysis, are dealt with in detail, and a final chapter provides both a description of and an outlook on recent Semantic Web and Web 2.0 developments. Overall, their book delivers...

  20. Lie algebras and applications

    CERN Document Server

    Iachello, Francesco

    2015-01-01

    This course-based primer provides an introduction to Lie algebras and some of their applications to the spectroscopy of molecules, atoms, nuclei and hadrons. In the first part, it concisely presents the basic concepts of Lie algebras, their representations and their invariants. The second part includes a description of how Lie algebras are used in practice in the treatment of bosonic and fermionic systems. Physical applications considered include rotations and vibrations of molecules (vibron model), collective modes in nuclei (interacting boson model), the atomic shell model, the nuclear shell model, and the quark model of hadrons. One of the key concepts in the application of Lie algebraic methods in physics, that of spectrum generating algebras and their associated dynamic symmetries, is also discussed. The book highlights a number of examples that help to illustrate the abstract algebraic definitions and includes a summary of many formulas of practical interest, such as the eigenvalues of Casimir operators...

  1. Clinical applications of magnetoencephalography.

    Science.gov (United States)

    Stufflebeam, Steven M; Tanaka, Naoaki; Ahlfors, Seppo P

    2009-06-01

    Magnetoencephalography (MEG), in which magnetic fields generated by brain activity are recorded outside of the head, is now in routine clinical practice throughout the world. MEG has become a recognized and vital part of the presurgical evaluation of patients with epilepsy and patients with brain tumors. We review investigations that show an improvement in the postsurgical outcomes of patients with epilepsy by localizing epileptic discharges. We also describe the most common clinical MEG applications that affect the management of patients, and discuss some applications that are close to having a clinical impact on patients. (c) 2009 Wiley-Liss, Inc.

  2. Mixtures Estimation and Applications

    CERN Document Server

    Mengersen, Kerrie; Titterington, Mike

    2011-01-01

    This book uses the EM (expectation maximization) algorithm to simultaneously estimate the missing data and unknown parameter(s) associated with a data set. The parameters describe the component distributions of the mixture; the distributions may be continuous or discrete. The editors provide a complete account of the applications, mathematical structure and statistical analysis of finite mixture distributions along with MCMC computational methods, together with a range of detailed discussions covering the applications of the methods and features chapters from the leading experts on the subject

  3. Current military laser applications

    Energy Technology Data Exchange (ETDEWEB)

    Flinchbaugh, D.E.

    1975-08-01

    Several important military applications with the predominant laser type used are reviewed. Most of these lasers are infrared lasers of one sort or another. Airborne tactical programs utilizing laser designator/illuminators are pictorially summarized, including range finding, target seeking, designation, tracking, reconnaissance, and surveillance. A typical designator optical system configuration is presented and discussed. Examples of operational laser systems are given. It is seen that many of the laser applications in the civilian community have either direct or indirect analogs in the military field. A self-contained HF/DF chemical laser weapon that recirculates its by-products is examined.

  4. Laravel application development blueprints

    CERN Document Server

    Kiliçdagi, Arda

    2013-01-01

    Follow along as we work together to build 10 different applications using Laravel 4. Since each chapter is devoted to the design of a different application, there is no need to read the book in any particular order. Instead, you can pick and choose the blueprints that are of most interest to you and dive right in.This book is for intermediate to advanced level PHP programmers who want to master Laravel. It's assumed that you will have some experience with PHP already. This book is also for those who are already using a different PHP framework and are looking for better solutions.

  5. Science Application Teams

    Science.gov (United States)

    2000-01-01

    This paper discusses the science application team activities. Science Application team are: (1) Represent the diversity of NASA onboard computing of the future. (2) Drive architecture and system software requirements. (3) Demonstrate the benefit of highly capable computing onboard. (4) Study the birth of the first galaxies. (5) Study formation of stars. (6) Discusses the next generation space telescope hardware/software requirement: image processing and on-board optical calibration. Also discusses gamma ray large area space telescope; orbital thermal imaging spectrometer; solar terrestrial probe program; autonomous Mars rover;fault tolerance and errors.

  6. Modular Mobile Application Design

    Directory of Open Access Journals (Sweden)

    Jim Hahn

    2012-10-01

    Full Text Available This article describes the development of the Minrva library app for Android phones. The decisions to build a native application with Java and use a modular design are discussed. The application includes five modules: catalog search, in-building navigation, a barcode scanning feature, and up to date notifications of circulating technology availability. A sixth module, Amazon recommendations, that is not included in the version of the app that was released is also discussed. The article also reports on the findings of two rounds of usability testing and the plans for future development of the app.

  7. PSA in application

    International Nuclear Information System (INIS)

    Thadani, A.C.

    1989-01-01

    This paper reports on Probabilistic Safety Assessment methodologies which are finding wide application within the nuclear power industry. Plant specific studies have been useful in identifying design vulnerabilities, providing a basis for prioritization of plant modifications and in an operations management role. PSA applications in regulatory activities have also proven very beneficial to the US NRC in assessing significance of operating plant events/issues, consideration of potential design improvements, standard plant licensing and conducting regulatory and cost-benefit analyses on proposed generic issue resolution. The benefits from such studies are concluded to be well worth their cost

  8. Location Based Application Availability

    Science.gov (United States)

    Naeem Akram, Raja; Markantonakis, Konstantinos; Mayes, Keith

    Smart cards are being integrated into a diverse range of industries: ranging from banking, telecom, transport, home/office access control to health and E-passport. Traditionally, cardholders are required to carry a smart card for each application. However, recent developments in the Near Field Communication (NFC) have renewed the interest in multiple applications for different services on a single device. This paper builds onto the NFC initiative and avoids the smart card ownership issues that hinder the adoption of such devices. The proposal integrates the Global Positioning System with the NFC in mobile phones to provide a ubiquitously and flexible service access model.

  9. Optimization : insights and applications

    CERN Document Server

    Brinkhuis, Jan

    2005-01-01

    This self-contained textbook is an informal introduction to optimization through the use of numerous illustrations and applications. The focus is on analytically solving optimization problems with a finite number of continuous variables. In addition, the authors provide introductions to classical and modern numerical methods of optimization and to dynamic optimization. The book's overarching point is that most problems may be solved by the direct application of the theorems of Fermat, Lagrange, and Weierstrass. The authors show how the intuition for each of the theoretical results can be s

  10. Erokovnik mobile application

    OpenAIRE

    Barlič, Gregor

    2009-01-01

    The object of this dissertation is to describe a mobile application eRokovnik for managing different types of events. The application is primarily intended for modern mobile phones and as such allows to effectively monitor all functions and other events by user. The user has a transparent, simple and efficient user interface for easy management of data. Data is stored in the database on your mobile device locally. A backup copy of saved data can be made on user request using the integrate...

  11. Application of stepping motor

    International Nuclear Information System (INIS)

    1980-10-01

    This book is divided into three parts, which is about practical using of stepping motor. The first part has six chapters. The contents of the first part are about stepping motor, classification of stepping motor, basic theory og stepping motor, characteristic and basic words, types and characteristic of stepping motor in hybrid type and basic control of stepping motor. The second part deals with application of stepping motor with hardware of stepping motor control, stepping motor control by microcomputer and software of stepping motor control. The last part mentions choice of stepping motor system, examples of stepping motor, measurement of stepping motor and practical cases of application of stepping motor.

  12. Cluster analysis for applications

    CERN Document Server

    Anderberg, Michael R

    1973-01-01

    Cluster Analysis for Applications deals with methods and various applications of cluster analysis. Topics covered range from variables and scales to measures of association among variables and among data units. Conceptual problems in cluster analysis are discussed, along with hierarchical and non-hierarchical clustering methods. The necessary elements of data analysis, statistics, cluster analysis, and computer implementation are integrated vertically to cover the complete path from raw data to a finished analysis.Comprised of 10 chapters, this book begins with an introduction to the subject o

  13. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  14. Plasmonics theory and applications

    CERN Document Server

    Shahbazyan, Tigran V

    2014-01-01

    This contributed volume summarizes recent theoretical developments in plasmonics and its applications in physics, chemistry, materials science, engineering, and medicine. It focuses on recent advances in several major areas of plasmonics including plasmon-enhanced spectroscopies, light scattering, many-body effects, nonlinear optics, and ultrafast dynamics. The theoretical and computational methods used in these investigations include electromagnetic calculations, density functional theory calculations, and nonequilibrium electron dynamics calculations. The book presents a comprehensive overview of these methods as well as their applications to various current problems of interest.

  15. Tunable laser applications

    CERN Document Server

    Duarte, FJ

    2008-01-01

    Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

  16. Gas solubilities widespread applications

    CERN Document Server

    Gerrard, William

    1980-01-01

    Gas Solubilities: Widespread Applications discusses several topics concerning the various applications of gas solubilities. The first chapter of the book reviews Henr's law, while the second chapter covers the effect of temperature on gas solubility. The third chapter discusses the various gases used by Horiuti, and the following chapters evaluate the data on sulfur dioxide, chlorine data, and solubility data for hydrogen sulfide. Chapter 7 concerns itself with solubility of radon, thoron, and actinon. Chapter 8 tackles the solubilities of diborane and the gaseous hydrides of groups IV, V, and

  17. Pump characteristics and applications

    CERN Document Server

    Volk, Michael

    2013-01-01

    Providing a wealth of information on pumps and pump systems, Pump Characteristics and Applications, Third Edition details how pump equipment is selected, sized, operated, maintained, and repaired. The book identifies the key components of pumps and pump accessories, introduces the basics of pump and system hydraulics as well as more advanced hydraulic topics, and details various pump types, as well as special materials on seals, motors, variable frequency drives, and other pump-related subjects. It uses example problems throughout the text, reinforcing the practical application of the formulae

  18. Graphs Theory and Applications

    CERN Document Server

    Fournier, Jean-Claude

    2008-01-01

    This book provides a pedagogical and comprehensive introduction to graph theory and its applications. It contains all the standard basic material and develops significant topics and applications, such as: colorings and the timetabling problem, matchings and the optimal assignment problem, and Hamiltonian cycles and the traveling salesman problem, to name but a few. Exercises at various levels are given at the end of each chapter, and a final chapter presents a few general problems with hints for solutions, thus providing the reader with the opportunity to test and refine their knowledge on the

  19. Experimental approaches and applications

    CERN Document Server

    Crasemann, Bernd

    1975-01-01

    Atomic Inner-Shell Processes, Volume II: Experimental Approaches and Applications focuses on the physics of atomic inner shells, with emphasis on experimental aspects including the use of radioactive atoms for studies of atomic transition probabilities. Surveys of modern techniques of electron and photon spectrometry are also presented, and selected practical applications of inner-shell processes are outlined. Comprised of six chapters, this volume begins with an overview of the general principles underlying the experimental techniques that make use of radioactive isotopes for inner-sh

  20. Developing Web Applications

    CERN Document Server

    Moseley, Ralph

    2007-01-01

    Building applications for the Internet is a complex and fast-moving field which utilizes a variety of continually evolving technologies. Whether your perspective is from the client or server side, there are many languages to master - X(HTML), JavaScript, PHP, XML and CSS to name but a few. These languages have to work together cleanly, logically and in harmony with the systems they run on, and be compatible with any browsers with which they interact. Developing Web Applications presents script writing and good programming practice but also allows students to see how the individual technologi

  1. Medical applications of accelerators

    CERN Document Server

    Rossi, Sandro

    1998-01-01

    At Present, about five thousands accelerators are devoted to biomedical applications. They are mainly used in radiotherapy, research and medical radioisotopes production. In this framework oncological hadron-therapy deserves particular attention since it represents a field in rapid evolution thanks to the joint efforts of laboratories with long experiences in particle physics. It is the case of CERN where the design of an optimised synchrotron for medical applications has been pursued. These lectures present these activities with particular attention to the new developments which are scientifically interesting and/or economically promising.

  2. Permit application modifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  3. Business Applications of WAP.

    Science.gov (United States)

    van Steenderen, Margaret

    2002-01-01

    Explains the development of WAP (wireless application protocol), how it works, and what the major advantages and disadvantages are, especially when applied to the use of information. Topics include standardization; mobile communications; the effect of WAP on business tools, electronic commerce, and information services; consumers; corporate users;…

  4. Clinical Application of Electrocardiography.

    Science.gov (United States)

    Brammell, H. L.; Orr, William

    The scalar electrocardiogram (ECG) is one of the most important and commonly used clinical tools in medicine. A detailed description of the recordings of cardiac electrical activity made by the ECG is presented, and the vast numbers of uses made with the data provided by this diagnostic tool are cited. Clinical applications of the ECG are listed.…

  5. Computer applications in radiology.

    Science.gov (United States)

    Vannier, M W

    1991-04-01

    Computer applications in radiology are evolving rapidly, tied to incremental improvements in hardware, software, and methods. In computer hardware, the emergence of dramatically improved graphic and computational performance for engineering workstations enables their use for visualization. Major changes in networking, storage, and display technology play a major role in influencing applications. The use of three-dimensional digitizers to perform localization of real three-dimensional points in conjunction with images and the rendering of objects using rapid prototyping methods, such as stereolithography, were recently reported. Major software advances have taken place through the availability of applications packages that are operated with menu-driven or point-and-click user interfaces, data flow languages, or complete turnkey applications. Imaging methods including CT, MR imaging, digital radiography, biomagnetism, and optical range sensing, which take advantage of advanced computer technology, are new this year. Image processing for multimodality fusion or image registration, visualization, reconstruction, and quantification of images, have been reported at a wide variety of conferences and in key publications. New computer methods to fabricate custom orthopaedic implants, and to improve imaging technology assessment were introduced.

  6. Knotoids, Braidoids and Applications

    Directory of Open Access Journals (Sweden)

    Neslihan Gügümcü

    2017-12-01

    Full Text Available This paper is an introduction to the theory of braidoids. Braidoids are geometric objects analogous to classical braids, forming a counterpart theory to the theory of knotoids. We introduce these objects and their topological equivalences, and we conclude with a potential application to the study of proteins.

  7. Medical applications of colloids

    CERN Document Server

    Matijevic, Egon

    2008-01-01

    The first book of its type on the medical and biomedical applications of colloids, although there are some related titles on different topicsDiscusses the effects of uniform particles in drug formulations and releaseEvaluates particle transport and deposition in the human body.

  8. Process intensification : Industrial applications

    NARCIS (Netherlands)

    Kiss, Anton A.

    2016-01-01

    The chapter presents process intensification technologies used in industrial applications, for increasing the eco-efficiency of the chemical equipment with the benefit of lower capital costs, substantial energy saving, reduced footprint, and safety by design. The key topics cover compact heat

  9. Applications of QCD

    International Nuclear Information System (INIS)

    Landshoff, P.V.

    1983-01-01

    The author describes the application of quantum chromodynamics to deep inelastic lepton scattering, the Drell-Yan process, e + e - -annihilation, #betta##betta#-physics, large psub(T) processes, and wide angle quark-quark scattering. Furthermore higher order terms are considered. (HSI)

  10. Applications of fluid dynamics

    International Nuclear Information System (INIS)

    Round, G.R.; Garg, V.K.

    1986-01-01

    This book describes flexible and practical approach to learning the basics of fluid dynamics. Each chapter is a self-contained work session and includes a fluid dynamics concept, an explanation of the principles involved, an illustration of their application and references on where more detailed discussions can be found

  11. Zirconia in biomedical applications.

    Science.gov (United States)

    Chen, Yen-Wei; Moussi, Joelle; Drury, Jeanie L; Wataha, John C

    2016-10-01

    The use of zirconia in medicine and dentistry has rapidly expanded over the past decade, driven by its advantageous physical, biological, esthetic, and corrosion properties. Zirconia orthopedic hip replacements have shown superior wear-resistance over other systems; however, risk of catastrophic fracture remains a concern. In dentistry, zirconia has been widely adopted for endosseous implants, implant abutments, and all-ceramic crowns. Because of an increasing demand for esthetically pleasing dental restorations, zirconia-based ceramic restorations have become one of the dominant restorative choices. Areas covered: This review provides an updated overview of the applications of zirconia in medicine and dentistry with a focus on dental applications. The MEDLINE electronic database (via PubMed) was searched, and relevant original and review articles from 2010 to 2016 were included. Expert commentary: Recent data suggest that zirconia performs favorably in both orthopedic and dental applications, but quality long-term clinical data remain scarce. Concerns about the effects of wear, crystalline degradation, crack propagation, and catastrophic fracture are still debated. The future of zirconia in biomedical applications will depend on the generation of these data to resolve concerns.

  12. Biomedical applications engineering tasks

    Science.gov (United States)

    Laenger, C. J., Sr.

    1976-01-01

    The engineering tasks performed in response to needs articulated by clinicians are described. Initial contacts were made with these clinician-technology requestors by the Southwest Research Institute NASA Biomedical Applications Team. The basic purpose of the program was to effectively transfer aerospace technology into functional hardware to solve real biomedical problems.

  13. Star Products and Applications

    OpenAIRE

    Iida, Mari; Yoshioka, Akira

    2010-01-01

    Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

  14. Membrane contactor applications

    NARCIS (Netherlands)

    Klaassen, R.; Feron, P.H.M.; Jansen, A.

    2008-01-01

    In a membrane contactor the membrane separation is completely integrated with an extraction or absorption operation in order to exploit the benefits of both technologies fully. Membrane contactor applications that have been developed can be found in both water and gas treatment. Several recently

  15. Technology and applications

    International Nuclear Information System (INIS)

    Bogdany, J.; Vesztergombi, G.

    1994-07-01

    The workshop on Parallel Processing, Technology and Applications, held February 10-11, Budapest, Hungary, covered a variety of topics on computer data processing and parallel computing. One of the 17 presentations discussed the need for massively parallel processing in support of future high energy experiments

  16. Applications Using AIRS Data

    Science.gov (United States)

    Ray, S. E.; Pagano, T. S.; Fetzer, E. J.; Lambrigtsen, B.; Olsen, E. T.; Teixeira, J.; Licata, S. J.; Hall, J. R.; Thompson, C. K.

    2015-12-01

    The Atmospheric Infrared Sounder (AIRS) on NASA's Aqua spacecraft has been returning daily global observations of Earth's atmospheric constituents and properties since 2002. With a 12-year data record and daily, global observations in near real-time, AIRS data can play a role in applications that fall under many of the NASA Applied Sciences focus areas. For vector-borne disease, research is underway using AIRS near surface retrievals to assess outbreak risk, mosquito incubation periods and epidemic potential for dengue fever, malaria, and West Nile virus. For drought applications, AIRS temperature and humidity data are being used in the development of new drought indicators and improvement in the understanding of drought development. For volcanic hazards, new algorithms using AIRS data are in development to improve the reporting of sulfur dioxide concentration, the burden and height of volcanic ash and dust, all of which pose a safety threat to aircraft. In addition, anomaly maps of many of AIRS standard products are being produced to help highlight "hot spots" and illustrate trends. To distribute it's applications imagery, AIRS is leveraging existing NASA data frameworks and organizations to facilitate archiving, distribution and participation in the BEDI. This poster will communicate the status of the applications effort for the AIRS Project and provide examples of new maps designed to best communicate the AIRS data.

  17. Beaming teaching application

    DEFF Research Database (Denmark)

    Markovic, Milos; Madsen, Esben; Olesen, Søren Krarup

    2012-01-01

    BEAMING is a telepresence research project aiming at providing a multimodal interaction between two or more participants located at distant locations. One of the BEAMING applications allows a distant teacher to give a xylophone playing lecture to the students. Therefore, rendering of the xylophon...

  18. Permit application modifications

    International Nuclear Information System (INIS)

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils

  19. Microfluidics for medical applications

    NARCIS (Netherlands)

    van den Berg, Albert; van den Berg, A.; Segerink, L.I.; Segerink, Loes Irene; Unknown, [Unknown

    2015-01-01

    Lab-on-a-chip devices for point of care diagnostics have been present in clinics for several years now. Alongside their continual development, research is underway to bring the organs and tissue on-a-chip to the patient, amongst other medical applications of microfluidics. This book provides the

  20. Polymeric Microspheres for Medical Applications

    Directory of Open Access Journals (Sweden)

    Ketie Saralidze

    2010-06-01

    Full Text Available Synthetic polymeric microspheres find application in a wide range of medical applications. Among other applications, microspheres are being used as bulking agents, embolic- or drug-delivery particles. The exact composition of the spheres varies with the application and therefore a large array of materials has been used to produce microspheres. In this review, the relation between microsphere synthesis and application is discussed for a number of microspheres that are used for different treatment strategies.

  1. Novel Applications of Peroxidase

    Science.gov (United States)

    Rob, Abdul; Ball, Andrew S.; Tuncer, Munir; Wilson, Michael T.

    1997-02-01

    The article entitled "Novel Biocatalysts Will Work Even Better for Industry" published recently in this Journal (1) was informative and interesting. However it touched only briefly on the application of peroxidase as catalyst. Here, we would like to mention in more detail the novel applications of peroxidase in agricultural, paper pulp, water treatment, pharmaceutical, and medical situations. Firstly, the peroxidase isolated from Phanerochaete chyrosporium has been shown to detoxify herbicides such as atrazine to less toxic compounds and would certainly find potential application in agriculture (2). Secondly, the peroxidase produced by Streptomyces thermoviolaceus may find application in the paper pulp industry as a delignifying agent (3). Thirdly, it has been shown that extracellular peroxidase produced by Streptomyces avermitilis can remove the intense color from paper-mill effluent obtained after semichemical alkaline pulping of wheat straw (4), and thus this enzyme might find application as a catalyst in water treatment plants. Fourthly, the heme-containing horseradish peroxidase enzyme has been exploited in several diagnostic applications in pharmaceutics and medicine, such as the detection of human immunodeficiency virus and cystic fibrosis (5-10). Finally, recent work from our laboratory has suggested that thermophilic nonheme peroxidase produced by Thermomonospora fusca BD25 may find medical use in the diagnosis of myocardial infarction (11, 12). Literature Cited 1. Wiseman, A. J. Chem. Educ. 1996, 73, 55-58. 2. Mougin, C. Appl. Environ. Microbiol. 1994, 60, 705-708. 3. McCarthy A. J.; Peace, W.; Broda, P. Appl. Microbiol. Technol. 1985, 23, 238-244. 4. Hernandez, M; Rodriguez J; Soliveri, J; Copa, J. L; Perez, M. I; Arias, M. E. Appl. Environ. Microbiol. 1994, 60, 3909-3913. 5. Hopfer, S. M.; Aslanzadeh, J. Ann. Clin. Lab. Sci. 1995, 25, 475-480. 6. Suzuki, K; Iman, M. J. Virol. Methods 1995, 55, 347-356. 7. Nielsen, K. J. Immunoassay 1995, 16, 183-197. 8

  2. The fusion applications study - FAME

    International Nuclear Information System (INIS)

    Schultz, K.R.; Engholm, B.A.; Bourque, R.F.; Cheng, E.T.; Schaffer, M.J.; Wong, C.P.C.

    1986-01-01

    The Fusion Applications and Market Evaluation (''FAME'') study, being conducted by GA Technologies for Lawrence Livermore National Laboratory (LLNL) and US Department of Energy, Office of Fusion Energy, (US DOE) is described. This two-year program has a FY86 objective of Evaluating Alternative Applications of Fusion, and a FY87 goal of Exploring Innovative Applications. Applications are being reviewed and categorized into Baseline, Nuclear, Chemical, Electromagnetic, and Thermal application categories. The ''traditional'' applications of electricity generation, fissile fuel and tritium production, and hydrogen production continue to look attractive. Particularly promising new applications to date, with potential for near-term markets, are isotope production and radiation processing, especially when allied with the traditional application of electricity production. The economics of separate applications as well as coproduction are discussed. The combination of electricity and /sup 60/Co production appears to be one of the most attractive

  3. Optical Polarizationin Biomedical Applications

    CERN Document Server

    Tuchin, Valery V; Zimnyakov, Dmitry A

    2006-01-01

    Optical Polarization in Biomedical Applications introduces key developments in optical polarization methods for quantitative studies of tissues, while presenting the theory of polarization transfer in a random medium as a basis for the quantitative description of polarized light interaction with tissues. This theory uses the modified transfer equation for Stokes parameters and predicts the polarization structure of multiple scattered optical fields. The backscattering polarization matrices (Jones matrix and Mueller matrix) important for noninvasive medical diagnostic are introduced. The text also describes a number of diagnostic techniques such as CW polarization imaging and spectroscopy, polarization microscopy and cytometry. As a new tool for medical diagnosis, optical coherent polarization tomography is analyzed. The monograph also covers a range of biomedical applications, among them cataract and glaucoma diagnostics, glucose sensing, and the detection of bacteria.

  4. Thin film device applications

    CERN Document Server

    Kaur, Inderjeet

    1983-01-01

    Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti­ cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver­ sion, and protection and passivating layers. Ind...

  5. Magnetoplasmadynamic thruster applications

    International Nuclear Information System (INIS)

    Pawlik, E.V.

    1976-01-01

    Advance study activities within NASA indicate that electric propulsion will be required to make certain types of potential missions feasible. The large power levels under consideration make magnetoplasmadynamic thrusters a good candidate for these applications since this type of electric thruster is best suited to operation at high power levels. The status of the magnetoplasmadynamic thruster is examined and compared to the ion thruster which also is a candidate. The use of these two types of electric propulsion devices for orbit raising of a self-powered large satellite is examined from a cost standpoint. In addition the use of nuclear electric propulsion is described for use as both a near-earth space tug and for an interplanetary exploration vehicle. These preliminary examinations indicate that the magnetoplasmadynamic thruster is the lowest cost thruster and therefore merits serious consideration for these applications

  6. Diverse applications of radioimmunoassay

    International Nuclear Information System (INIS)

    Yalow, R.S.

    1981-01-01

    The author discussed the issues concerning insulins of the different species (pig, dog and sperm whale) and the applications of species specific antisera in experimental and clinical settings. The possible role of a new form of ACTH as a hormonal marker was also discussed. Three species of insulin (pig, dog, and sperm whale) were separated by human antisera. Immune reaction was utilized to distinguish between endogenous human insulin and exogenously administered animal insulin. The longer acting insulins was found to be more immunogenic than regular crystalline insulins. Insulin concentrations in acid/ethanol extracts of the whole rat brain was about 25 times higher than plasma insulin. Plasma concentration of ACTH could be applicable to effect the distinction between tumor primary in or metastatic to the lung. (Nakanishi, T.)

  7. Nanotechnology applications in osteodistraction

    Directory of Open Access Journals (Sweden)

    Adam E Singleton

    2014-06-01

    Full Text Available Most current strategies for bone regeneration have relatively satisfactory results. However, there are drawbacks and limitations associated with their use and availability, and even controversial reports about their efficacy and cost-effectiveness. The induction of new bone formation through distraction osteogenesis (DO is widespread clinical application in the treatment of bone defects, limb deformities, and fracture nonunions. However, a lengthy period of external fixation is usually needed to allow the new bone to consolidate, and complications such as refracture at the distraction gap often occur. Although various biomaterials have been used as injectable delivery systems in DO models, little has been reported on the use of nanobiomaterials as carrier materials for the sustained release of growth factors in bone regeneration. One area of focus in nanotechnology is the delivery of osteogenic factors in an attempt to modulate the formation of bone. This review article seeks to demonstrate the potential of nanobiomaterials to improve biological applications pertinent to osteodistraction.

  8. Nonlocal diffusion and applications

    CERN Document Server

    Bucur, Claudia

    2016-01-01

    Working in the fractional Laplace framework, this book provides models and theorems related to nonlocal diffusion phenomena. In addition to a simple probabilistic interpretation, some applications to water waves, crystal dislocations, nonlocal phase transitions, nonlocal minimal surfaces and Schrödinger equations are given. Furthermore, an example of an s-harmonic function, its harmonic extension and some insight into a fractional version of a classical conjecture due to De Giorgi are presented. Although the aim is primarily to gather some introductory material concerning applications of the fractional Laplacian, some of the proofs and results are new. The work is entirely self-contained, and readers who wish to pursue related subjects of interest are invited to consult the rich bibliography for guidance.

  9. Quality Control Applications

    CERN Document Server

    Chorafas, Dimitris N

    2013-01-01

    Quality control is a constant priority in electrical, mechanical, aeronautical, and nuclear engineering – as well as in the vast domain of electronics, from home appliances to computers and telecommunications. Quality Control Applications provides guidance and valuable insight into quality control policies; their methods, their implementation, constant observation and associated technical audits. What has previously been a mostly mathematical topic is translated here for engineers concerned with the practical implementation of quality control. Once the fundamentals of quality control are established, Quality Control Applications goes on to develop this knowledge and explain how to apply it in the most effective way. Techniques are described and supported using relevant, real-life, case studies to provide detail and clarity for those without a mathematical background. Among the many practical examples, two case studies dramatize the importance of quality assurance: A shot-by-shot analysis of the errors made ...

  10. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  11. Information Engineering and Applications

    CERN Document Server

    Ma, Yan; International Conference on Information Engineering and Applications (IEA) 2011

    2012-01-01

    The International Conference on Information Engineering and Applications (IEA) 2011 will be held on October 21-24, 2011, in Chongqing, China. It is organized by Chongqing Normal University, Chongqing University, Shanghai Jiao Tong University, Nanyang Technological University, the University of Michigan, Chongqing University of Arts and Sciences, and sponsored by the National Natural Science Foundation of China. The objective of IEA 2011 is to facilitate an exchange of information on best practices for the latest research advances in the area of information engineering and intelligence applications, which mainly includes computer science and engineering, informatics, communications and control, electrical engineering, information computing, business intelligence and management. IEA 2011 will provide a forum for engineers and scientists in academia, industry, and government to address the most innovative research and development including technical challenges, social and economic issues, and to present and disc...

  12. Application of ecological mapping

    International Nuclear Information System (INIS)

    Sherk, J.A.

    1982-01-01

    The US Fish and Wildlife Service has initiated the production of a comprehensive ecological inventory map series for use as a major new planning tool. Important species data along with special land use designations are displayed on 1:250,000 scale topographic base maps. Sets of maps have been published for the Atlantic and Pacific coastal areas of the United States. Preparation of a map set for the Gulf of Mexico is underway at the present time. Potential application of ecological inventory map series information to a typical land disposal facility could occur during the narrowing of the number of possible disposal sites, the design of potential disposal site studies of ecological resources, the preparation of the environmental report, and the regulatory review of license applications. 3 figures, 3 tables

  13. Biophotonics concepts to applications

    CERN Document Server

    Keiser, Gerd

    2016-01-01

    This book is designed to introduce senior-level and postgraduate students to the principles and applications of biophotonics. It also will serve well as a working reference to practicing physicians, clinicians, biomedical researchers, and biomedical engineers dealing with photonics-based tools and instruments. The book topics include the fundamentals of optics and photonics, the optical properties of biological tissues, various types of light-tissue interactions, microscopy for visualizing tissue components, spectroscopy for optically analyzing the properties of healthy and diseased tissue, and optical biomedical imaging. The tools and techniques described in the book include laser and LED optical sources, photodetectors, optical fibers, bioluminescent probes for labeling cells, optical-based biosensors, nanophotonics, surface plasmon resonance, and lab-on-a-chip technologies. Among the applications are optical coherence tomography (OCT), flow cytometery, photodynamic therapy (PDT), low-level light therapy (L...

  14. Technology applications bulletins

    International Nuclear Information System (INIS)

    Koncinski, W. Jr.

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers

  15. Ceramics for fusion applications

    International Nuclear Information System (INIS)

    Clinard, F.W. Jr.

    1987-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al 2 O 3 , MgAl 2 O 4 , BeO, Si 3 N 4 and SiC are currently under study for fusion applications, and results to date show widely-varying responses to the fusion environment. Materials can be identified today that will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications. (author)

  16. [Industrial application of lipases].

    Science.gov (United States)

    Bancerz, Renata

    2017-01-01

    The ability of lipases to perform specific reactions of transformation (biotransformation) makes these enzymes a useful tool used in many syntheses, for example: in the production of detergents, cosmetics, biosurfactants, in the oil-chemical, paper, dairy, food or pharmaceutical industries. Lipases are ubiquitous enzymes but only lipases produced by microorganisms are important for industrial applications due to their wide variety of properties such as stability in organic solvents, action under mild conditions, high substrate specificity and region- and enantioselectivity, as well as the relatively simple methods of their production in fermentors and recovery from the culture medium. This paper reviews the latest achievements in the production of lipases in the submerged fermentation and solid state fermentation using waste products from the agricultural industry. In addition, new applications of lipases were described, including those for the synthesis of biopolymers and biodiesel and for the production of enantiomeric pharmaceuticals, agrochemicals and flavoring compounds.

  17. Mechanisms, Transmissions and Applications

    CERN Document Server

    Corves, Burkhard

    2012-01-01

    The first Workshop on Mechanisms, Transmissions and Applications -- MeTrApp-2011 was organized by the Mechatronics Department at the Mechanical Engineering Faculty, “Politehnica” University of Timisoara, Romania, under the patronage of the IFToMM Technical Committees Linkages and Mechanical Controls and Micromachines. The workshop brought together researchers and students who work in disciplines associated with mechanisms science and offered a great opportunity for scientists from all over the world to present their achievements, exchange innovative ideas and create solid international links, setting the trend for future developments in this important and creative field. The topics treated in this volume are mechanisms and machine design, mechanical transmissions, mechatronic and biomechanic applications, computational and experimental methods, history of mechanism and machine science and teaching methods.

  18. Quantum mechanics with applications

    CERN Document Server

    Beard, David B

    2014-01-01

    This introductory text emphasizes Feynman's development of path integrals and its application to wave theory for particles. Suitable for undergraduate and graduate students of physics, the well-written, clear, and rigorous text was written by two of the nation's leading authorities on quantum physics. A solid foundation in quantum mechanics and atomic physics is assumed. Early chapters provide background in the mathematical treatment and particular properties of ordinary wave motion that also apply to particle motion. The close relation of quantum theory to physical optics is stressed. Subsequent sections emphasize the physical consequences of a wave theory of material properties, and they offer extensive applications in atomic physics, nuclear physics, solid state physics, and diatomic molecules. Four helpful Appendixes supplement the text.

  19. Magnetism basics and applications

    CERN Document Server

    Stefanita, Carmen-Gabriela

    2012-01-01

    This textbook is aimed at engineering students who are likely to come across magnetics applications in their professional practice. Whether designing lithography equipment containing ferromagnetic brushes, or detecting defects in aeronautics, some basic knowledge of 21st century magnetism is needed. From the magnetic tape on the pocket credit card to the read head in a personal computer, people run into magnetism in many products. Furthermore, in a variety of disciplines tools of the trade exploit magnetic principles, and many interdisciplinary laboratory research areas cross paths with magnetic phenomena that may seem mysterious to the untrained mind. Therefore, this course offers a broad coverage of magnetism topics encountered more often in this millenium, revealing key concepts on which many practical applications rest. Some traditional subjects in magnetism are discussed in the first half of the book, followed by areas likely to spark the curiosity of those more interested in today’s technological achi...

  20. Ceramics for fusion applications

    International Nuclear Information System (INIS)

    Clinard, F.W. Jr.

    1986-01-01

    Ceramics are required for a variety of uses in both near-term fusion devices and in commercial powerplants. These materials must retain adequate structural and electrical properties under conditions of neutron, particle, and ionizing irradiation; thermal and applied stresses; and physical and chemical sputtering. Ceramics such as Al 2 O 3 , MgAl 2 O 4 , BeO, Si 3 N 4 and SiC are currently under study for fusion applications, and results to date show widely-varying response to the fusion environment. Materials can be identified today which will meet initial operating requirements, but improvements in physical properties are needed to achieve satisfactory lifetimes for critical applications

  1. Numerical semigroups and applications

    CERN Document Server

    Assi, Abdallah

    2016-01-01

    This work presents applications of numerical semigroups in Algebraic Geometry, Number Theory, and Coding Theory. Background on numerical semigroups is presented in the first two chapters, which introduce basic notation and fundamental concepts and irreducible numerical semigroups. The focus is in particular on free semigroups, which are irreducible; semigroups associated with planar curves are of this kind. The authors also introduce semigroups associated with irreducible meromorphic series, and show how these are used in order to present the properties of planar curves. Invariants of non-unique factorizations for numerical semigroups are also studied. These invariants are computationally accessible in this setting, and thus this monograph can be used as an introduction to Factorization Theory. Since factorizations and divisibility are strongly connected, the authors show some applications to AG Codes in the final section. The book will be of value for undergraduate students (especially those at a higher leve...

  2. Main applications of superconductors

    International Nuclear Information System (INIS)

    Tixador, P.; Brunet, Y.

    2007-01-01

    In 2004, the world market of superconductivity reached 3.65 billion euros and was mainly concerning the NbTi-type superconductors. The high critical temperature superconductors (HCTS) have not reached the industrial maturity yet, both in terms of efficiency and cost, but this situation may change at medium term. Superconductors are mainly used in the industry today to create moderated to high inductions (1.5 to more than 20 T) inside volumes up to several hundreds of m 3 . This article treats of the present day industrial applications of NbTi and Nb 3 Sn superconductors: 1 - specificities of superconductors: persisting mode, AC losses, protection of a superconducting magnet, dimensioning of a superconducting coil; 2 -industrial magnets: NMR imaging, spectroscopy, proton cyclotron; 3 - magnets for research: high energy physics (accelerators-colliders, detectors), fusion facilities (reaction, magnetic confinement, tokamak, ITER), laboratory magnets; 4 - magnets for specific applications: magnetic separation, magnetic levitated train, MHD. (J.S.)

  3. Nano technology and applications

    International Nuclear Information System (INIS)

    Takriti, S.

    2015-01-01

    Nano technology is the engineering of functional systems at the molecular scale. This covers both works and concepts that are more advanced. In its original sense, nano technology refers to the projected ability to construct items from the bottom up, using techniques and tools being developed today to make complete high performance products. Development of applications incorporating semiconductor nanoparticles to be used in the next generation of products, such as display technology, lighting, solar cells and biological imaging and others are widely progressives. Progress has been made in using medical applications (Nano medicine) which provided the possibility of delivering drugs to specific cells using nanoparticles. Otherwise, nanoparticles have high surface area to volume ratio, allowing many functional groups to be attached to a nanoparticle, which can seek out and bind to certain tumor cells (cancer). (author)

  4. Laravel application development cookbook

    CERN Document Server

    Matula, Terry

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.A short and precise guide to get you started with EaselJS , helping you to create some cool applications and games.EaselJS greatly simplifies application development in HTML5 Canvas using a syntax and an architecture very similar to the ActionScript 3.0 language. As a result, Flash / Flex developers will immediately feel at home but it's very easy to learn even if you've never opened Flash in your life. The book targets Web designers, animators,

  5. Biomedical applications of nanotechnology.

    Science.gov (United States)

    Ramos, Ana P; Cruz, Marcos A E; Tovani, Camila B; Ciancaglini, Pietro

    2017-04-01

    The ability to investigate substances at the molecular level has boosted the search for materials with outstanding properties for use in medicine. The application of these novel materials has generated the new research field of nanobiotechnology, which plays a central role in disease diagnosis, drug design and delivery, and implants. In this review, we provide an overview of the use of metallic and metal oxide nanoparticles, carbon-nanotubes, liposomes, and nanopatterned flat surfaces for specific biomedical applications. The chemical and physical properties of the surface of these materials allow their use in diagnosis, biosensing and bioimaging devices, drug delivery systems, and bone substitute implants. The toxicology of these particles is also discussed in the light of a new field referred to as nanotoxicology that studies the surface effects emerging from nanostructured materials.

  6. Superconductivity fundamentals and applications

    CERN Document Server

    Buckel, Werner

    2004-01-01

    This is the second English edition of what has become one of the definitive works on superconductivity in German -- currently in its sixth edition. Comprehensive and easy to understand, this introductory text is written especially with the non-specialist in mind. The authors, both long-term experts in this field, present the fundamental considerations without the need for extensive mathematics, describing the various phenomena connected with the superconducting state, with liberal insertion of experimental facts and examples for modern applications. While all fields of superconducting phenomena are dealt with in detail, this new edition pays particular attention to the groundbreaking discovery of magnesium diboride and the current developments in this field. In addition, a new chapter provides an overview of the elements, alloys and compounds where superconductivity has been observed in experiments, together with their major characteristics. The chapter on technical applications has been considerably expanded...

  7. Metagraphs and their applications

    CERN Document Server

    Basu, Amit

    2007-01-01

    The graph is a critical and useful concept in designing many information processing systems. Systems such as transaction processing systems, decision support systems, and workflow systems are all helped immensely by a graphical structure. Simple graphs and digraphs allow for the construction of a variety of system design tools that provide a convenient and appealing format for illustrating information infrastructures, while allowing any subsequent analyses to be performed by the user. However, the metagraph, a new graphical structure that is developed in this book, goes beyond the representational and provides Information Systems with a robust, analytical modeling graphic tool. METAGRAPHS AND THEIR APPLICATIONS is a presentation of metagraph theory and its applications that begins by defining a metagraph and its uses. They are more complex than a simple graph structure, but they allow for representation and analysis of more complex systems. The material contained in this book is presented in two parts. The fi...

  8. Industrial applications at GANIL

    International Nuclear Information System (INIS)

    Delagrange, H.

    1993-01-01

    After a first round of industrial applications using heavy ion beams, GANIL has refocused these activities along the lines defined by a strategy and market study. Heavy ion industrial applications take their roots in the physical effects of the interactions occurring between heavy ion projectiles and matter. Specific equipments operated by GANIL or CIRIL allow users to take benefit from these effects. By heavy ion irradiation, industrial companies qualify radiation hardened electronic components and sensitize plastic films to produce 'nuclear track' membranes. Research and development programs with laboratories of the public sector, focus on heavy ion lithography dedicated to large area luminescent flat screens with field emitter microtips and on tribology with radioactive implanted ions. Even sometimes facing difficulties to fill the gap between industry and research, GANIL is eager to promote heavy ion beam technologies. (author) 36 refs., 6 figs., 5 tabs

  9. Multifractals theory and applications

    CERN Document Server

    Harte, David

    2001-01-01

    Although multifractals are rooted in probability, much of the related literature comes from the physics and mathematics arena. Multifractals: Theory and Applications pulls together ideas from both these areas using a language that makes them accessible and useful to statistical scientists. It provides a framework, in particular, for the evaluation of statistical properties of estimates of the Renyi fractal dimensions.The first section provides introductory material and different definitions of a multifractal measure. The author then examines some of the various constructions for describing multifractal measures. Building from the theory of large deviations, he focuses on constructions based on lattice coverings, covering by point-centered spheres, and cascades processes. The final section presents estimators of Renyi dimensions of integer order two and greater and discusses their properties. It also explores various applications of dimension estimation and provides a detailed case study of spatial point patte...

  10. Iontophoresis: principles and applications

    Directory of Open Access Journals (Sweden)

    Eddy Krueger

    Full Text Available Introduction Iontophoresis is a noninvasive technique used to increase transdermal penetration of substances through the skin layer (epidermis, dermis and hypodermis in a controlled manner. Technological advance in recent decades have provided reduced cost of equipment needed for implementation, which allowed for the expansion of this technique. Objective The aim of this paper is to present the state of the art on iontophoresis, ranging from the atomic characteristics of the ion formation to the current applications of the technique. Methods Were researched papers from databases: IOP publishing, ScienceDirect, Pubmed, Springer, IEEE Xplore, Google Scholar and books with keywords iontophoresis, ions, topical applications between 1967 and 2010. Results Were selected (number of papers and database 1 IOP Publishing, 1 from ScienceDirect, Central, 1 from Springer, 2 from PubMed, 11 from IEEE Xplore, 35 from Google Scholar, and 15 books, totaling 66 references and websites with nationally marketed electrotherapy products. Conclusion Iontophoresis is suitable for applications such as acetic acid (calcific tendinitis and myositis ossificans, calcium chloride and magnesium sulfate (control of musculoskeletal spasms, dexamethasone (inflammation, lidocaine (inflammation of soft tissues, zinc oxide (rheumatoid arthritis. It is also used in cosmetic applications with devices attached to the skin and for eye treatment aimed at specific tissues of the eye, providing a treatment option for various eye diseases, reducing the complications secondary to traditional methods of treatment. The advantages are the significant increase in the release and control of therapeutic agents, including drugs with high molecular weight. The disadvantages of iontophoresis are the complexity of the drug release system and prolonged exposure of the skin to an electrical current.

  11. Homomorphic encryption and applications

    CERN Document Server

    Yi, Xun; Bertino, Elisa

    2014-01-01

    This book introduces the fundamental concepts of homomorphic encryption. From these foundations, applications are developed in the fields of private information retrieval, private searching on streaming data, privacy-preserving data mining, electronic voting and cloud computing. The content is presented in an instructional and practical style, with concrete examples to enhance the reader's understanding. This volume achieves a balance between the theoretical and the practical components of modern information security. Readers will learn key principles of homomorphic encryption as well as their

  12. Advanced Welding Applications

    Science.gov (United States)

    Ding, Robert J.

    2010-01-01

    Some of the applications of advanced welding techniques are shown in this poster presentation. Included are brief explanations of the use on the Ares I and Ares V launch vehicle and on the Space Shuttle Launch vehicle. Also included are microstructural views from four advanced welding techniques: Variable Polarity Plasma Arc (VPPA) weld (fusion), self-reacting friction stir welding (SR-FSW), conventional FSW, and Tube Socket Weld (TSW) on aluminum.

  13. Technology Applications Report

    Science.gov (United States)

    1995-01-01

    most advanced ballistic missile systems. BMDO is upgrading the PATRIOT missile, which is a land -based system designed to intercept aircraft and...a tall cake pan. It can be configured to convert heat from almost any type of fuel, such as liquid or solid biofuel and compressed natural gas...of the reactor have been cited for several applications. For example, some of the unique materials used for the reactor have grabbed the interest of a

  14. Applications of supramolecular chemistry

    CERN Document Server

    Schneider, Hans-Jörg

    2012-01-01

    ""The time is ripe for the present volume, which gathers thorough presentations of the numerous actually realized or potentially accessible applications of supramolecular chemistry by a number of the leading figures in the field. The variety of topics covered is witness to the diversity of the approaches and the areas of implementation…a broad and timely panorama of the field assembling an eminent roster of contributors.""-Jean-Marie Lehn, 1987 Noble Prize Winner in Chemistry

  15. Neural network applications

    Science.gov (United States)

    Padgett, Mary L.; Desai, Utpal; Roppel, T.A.; White, Charles R.

    1993-01-01

    A design procedure is suggested for neural networks which accommodates the inclusion of such knowledge-based systems techniques as fuzzy logic and pairwise comparisons. The use of these procedures in the design of applications combines qualitative and quantitative factors with empirical data to yield a model with justifiable design and parameter selection procedures. The procedure is especially relevant to areas of back-propagation neural network design which are highly responsive to the use of precisely recorded expert knowledge.

  16. Biomaterials and their applications

    CERN Document Server

    Reza Rezaie, Hamid; Öchsner, Andreas

    2015-01-01

    This short book presents an overview of different types of biomaterial such as bio ceramics, bio polymers, metals and bio composites, while especially focusing on nano biomaterials and their applications in different tissues. It provides a compact introduction to nano materials for drug delivery systems, tissue engineering and implants, while also reviewing essential trends in the biomaterial field over the last few decades and the latest developments.

  17. Hardware characteristic and application

    International Nuclear Information System (INIS)

    Gu, Dong Hyeon

    1990-03-01

    The contents of this book are system board on memory, performance, system timer system click and specification, coprocessor such as programing interface and hardware interface, power supply on input and output, protection for DC output, Power Good signal, explanation on 84 keyboard and 101/102 keyboard,BIOS system, 80286 instruction set and 80287 coprocessor, characters, keystrokes and colors, communication and compatibility of IBM personal computer on application direction, multitasking and code for distinction of system.

  18. Application of Auto CAD

    International Nuclear Information System (INIS)

    Park, Yong Un; Kim, Geun Ho

    1989-05-01

    This book has introduction to use this book and explanation of application on Auto CAD, which includes, sub directories, batch files, robot wrist, design of standard paper, title block, robort weld room, robert wrist joint, PC board, plant sym, electro, PID, machines, robots, bubbles, plant, schema, Pid, plant assembly, robots, dim plant, PL-ASSM, plotting line weight control, symbol drawing joint, Auto CAD using script file, set up of workout · MNU, workout MNU, ACAD, LSP and workout · MNU.

  19. Personal Network (PN) Applications

    DEFF Research Database (Denmark)

    Prasad, Ramjee; Skouby, K.

    2005-01-01

    The applications of PN will be realised under many scenarios where users can have access to their personal network all the time. This network will enable the user to share critical information, play games, control their home remotely, etc. All this will be achieved with seamless interworking...... and handover between networks and user devices. This paper presents an array of use case scenarios that validates the ubiquitous usage of PN....

  20. Personal network (PN) applications

    DEFF Research Database (Denmark)

    Prasad, R.; Skouby, Knud Erik

    2005-01-01

    The applications of PN will be realised under many scenarios where users can have access to their personal network all the time. This network will enable the user to share critical information, play games, control their home remotely, etc. All this will be achieved with seamless interworking...... and handover between networks and user devices. This paper presents an array of use case scenarios that validates the ubiquitous usage of PN....

  1. Android application security essentials

    CERN Document Server

    Rai, Pragati

    2013-01-01

    Android Application Security Essentials is packed with examples, screenshots, illustrations, and real world use cases to secure your apps the right way.If you are looking for guidance and detailed instructions on how to secure app data, then this book is for you. Developers, architects, managers, and technologists who wish to enhance their knowledge of Android security will find this book interesting. Some prior knowledge of development on the Android stack is desirable but not required.

  2. Nanotechnology and cancer applications

    OpenAIRE

    Gökdeniz, Mehmet; Akbaba, Muhsin; Nazlıcan, Ersin

    2018-01-01

    Applicationsof nanotechnology in various disciplines of medicine particularly cancer careare becoming increasingly popular so much so that the process of replacingtraditional health‑care by nanomedicine had already begun. Nanomedicine focuseson the formulations of imaging, diagnostic and therapeutic agents, which can becarried by biocompatible nanoparticles, for the purpose of cancer/ diseasemanagement.Common nanomaterials and devices applicable in cancer medicine are liposomes,polymeric‑mice...

  3. Optimization algorithms and applications

    CERN Document Server

    Arora, Rajesh Kumar

    2015-01-01

    Choose the Correct Solution Method for Your Optimization ProblemOptimization: Algorithms and Applications presents a variety of solution techniques for optimization problems, emphasizing concepts rather than rigorous mathematical details and proofs. The book covers both gradient and stochastic methods as solution techniques for unconstrained and constrained optimization problems. It discusses the conjugate gradient method, Broyden-Fletcher-Goldfarb-Shanno algorithm, Powell method, penalty function, augmented Lagrange multiplier method, sequential quadratic programming, method of feasible direc

  4. Graph theory with applications

    CERN Document Server

    Vasudev, C

    2006-01-01

    Salient Features Over 1500 problems are used to illustrate concepts, related to different topics, and introduce applications. Over 1000 exercises in the text with many different types of questions posed. Precise mathematical language is used without excessive formalism and abstraction. Care has been taken to balance the mix of notation and words in mathematical statements. Problem sets are stated clearly and unambiguously, and all are carefully graded for various levels of difficulty. This text has been carefully designed for flexible use.

  5. Applications of particle accelerators

    International Nuclear Information System (INIS)

    Barbalat, O.

    1994-01-01

    Particle accelerators are now widely used in a variety of applications for scientific research, applied physics, medicine, industrial processing, while possible utilisation in power engineering is envisaged. Earlier presentations of this subject, given at previous CERN Accelerator School sessions have been updated with papers contributed to the first European Conference on Accelerators in Applied Research and Technology (ECAART) held in September 1989 in Frankfurt and to the Second European Particle Accelerator Conference in Nice in June 1990. (orig.)

  6. Mimumes for SUBTLE applications

    Science.gov (United States)

    Lakhtakia, Akhlesh

    2014-08-01

    Inspired by natural multifunctionality, mimumes are microfibrous multifunctional metamaterials. Their microfibrosity engenders multifunctionality. Poly(p-xylylene) polymers that are currently used in bulk non-fibrous forms for packaging and tribological applications in electronic and biomedical arenas are excellent initial candidates to fabricate mimumes. In microfibrous forms, these polymers are expected to display simultaneous ultrasonic, biomedical, terahertz, light, and energy (SUBTLE) functionalities, thereby furthering the paradigm of design for system performance.

  7. Haar wavelets with applications

    CERN Document Server

    Lepik, Ülo

    2014-01-01

    This is the first book to present a systematic review of applications of the Haar wavelet method for solving Calculus and Structural Mechanics problems. Haar wavelet-based solutions for a wide range of problems, such as various differential and integral equations, fractional equations, optimal control theory, buckling, bending and vibrations of elastic beams are considered. Numerical examples demonstrating the efficiency and accuracy of the Haar method are provided for all solutions.

  8. Radioisotopes for medical applications

    International Nuclear Information System (INIS)

    Carr, S.

    1998-01-01

    For more than 3 decades, the Australian Nuclear Science and Technology Organisation has been the country's main supplier of radioisotopes for medical applications. The use of radioisotopes in medicine has revolutionised the diagnosis, management and treatment of many serious diseases such as cancer, heart disease and stroke. It is also beginning to play a key role in neurological disorders such as Parkinson and Alzheimers disease and epilepsy. More recently there has been considerable growth in the application of nuclear medicine to treat sport-related injuries - especially wrist, ankle and knees where more common techniques do not always enable accurate diagnosis. Australia is a recognised leader in nuclear medicine. This can be partially attributed to the close relationship between ANSTO and the medical community in providing opportunities to develop and evaluate new agents to support more effective patient care. A list of commercial isotopes produced in the reactor or the cyclotron and used in medical applications is given. Nuclear medicine plays an important role in the clinical environment and the timely supply of radioisotopes is a key element. ANSTO will continue to be the premier supplier of currently available and developing isotopes to support the health and well being of the Australian community

  9. [The applicability of results].

    Science.gov (United States)

    Marín-León, I

    2015-11-01

    The ultimate aim of the critical reading of medical literature is to use the scientific advances in clinical practice or for innovation. This requires an evaluation of the applicability of the results of the studies that have been published, which begins with a clear understanding of these results. When the studies do not provide sufficient guarantees of rigor in design and analysis, the conditions necessary for the applicability of the results are not met; however, the fact that the results are reliable is not enough to make it worth trying to use their conclusions. This article explains how carrying out studies in experimental or artificial conditions often moves them away from the real conditions in which they claim to apply their conclusions. To evaluate this applicability, the article proposes evaluating a set of items that will enable the reader to determine the likelihood that the benefits and risks reported in the studies will yield the least uncertainty in the clinical arena where they aim to be applied. Copyright © 2015 SERAM. Published by Elsevier España, S.L.U. All rights reserved.

  10. Applications of nuclear physics

    Science.gov (United States)

    Hayes, A. C.

    2017-02-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  11. Future applications of heterostructures

    Science.gov (United States)

    König, Ulf

    1996-01-01

    In this review the status and future of heterostructure devices is discussed. The author concentrates on III/V and Si/SiGe. Performance and applications are folded to the data and expectations of the micro- and opto-electronic market and to the traditional Si-mainstream. New trends, i.e. the SIA-roadmap, are checked how heterodevices can fit in. Only the most attractive candidates for applications are considered, i.e. the heterobipolar-, the hetero field effect-transistors, the resonant tunnel diode and to a less extent, some optoelectronic devices. Considered figures of merit are frequencies, transconductance, noise at high and low frequencies, threshold voltage, power delay, threshold current and quantum efficiencies. It is pointed out how to optimize those by material and design. Extrapolations to the future potential of heterodevices are made, just taking the claimed scaling of lateral dimensions into consideration. Field of applications are presented, where heterodevices offer exclusive qualities, i.e. high frequency transmission and sensors, and new mixed systems. In the case of logic the trend goes to nanoscaled devices and ICs targeting nanoelectronics beyond traditional electronics. Heterostructure layers allow a vertical nanoscaling and thus give an additional degree of freedom for designing and optimation. It is an attractive challenge for scientists and engineers to solve the related technological problems like thin, low thermal budget oxides, like defect free buffer layers etc. Special attention is put on Si/SiGe, which is now on an upswing in electronics and photonics.

  12. Panoramic lens applications revisited

    Science.gov (United States)

    Thibault, Simon

    2008-04-01

    During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

  13. Commercial applications for COIL

    Science.gov (United States)

    Solomon, Wayne C.; Carroll, David L.; King, D. M.; Fockler, L. A.; Stromberg, D. S.; Sexauer, M.; Milmoe, A.; Sentman, Lee H.

    2000-01-01

    The chemical oxygen-iodine laser (COIL) is a high power, fiber deliverable tool, which can be used for a number of different industrial applications. COIL is of particular interest because of its short fiber deliverable wavelength, high scaleable continuous wave power, and excellent material interaction properties. In past research the University of Illinois at Urbana-Champaign identified and decommissioning and decontamination (DD) of nuclear facilities as a primary focus for COIL technology. DD will be a major challenge in the coming decades. The use of a robotically driven fiber delivered cutting/ablation tool in contaminated areas promises to lower risks to workers for the DD mission. Further, the high cutting speed of COIL will significantly reduce the time required to cut contaminated equipment, reducing costs. The high power of COIL will permit the dismantling of thick stacks of piping and equipment as well as reactor vessels. COIL is very promising for the removal of material from contaminated surfaces, perhaps to depths thicker than an inch. Laser cutting and ablation minimizes dust and fumes, which reduces the required number of high efficiency particulate accumulator filters, thus reducing costly waste disposal. Other potential industrial applications for COIL are shipbuilding, automotive manufacturing, heavy machinery manufacturing, tasks requiring underwater cutting or welding, and there appear to be very promising applications for high powers lasers in the oil industry.

  14. Applications of nuclear physics

    International Nuclear Information System (INIS)

    Hayes-Sterbenz, Anna Catherine

    2017-01-01

    Today the applications of nuclear physics span a very broad range of topics and fields. This review discusses a number of aspects of these applications, including selected topics and concepts in nuclear reactor physics, nuclear fusion, nuclear non-proliferation, nuclear-geophysics, and nuclear medicine. The review begins with a historic summary of the early years in applied nuclear physics, with an emphasis on the huge developments that took place around the time of World War II, and that underlie the physics involved in designs of nuclear explosions, controlled nuclear energy, and nuclear fusion. The review then moves to focus on modern applications of these concepts, including the basic concepts and diagnostics developed for the forensics of nuclear explosions, the nuclear diagnostics at the National Ignition Facility, nuclear reactor safeguards, and the detection of nuclear material production and trafficking. The review also summarizes recent developments in nuclear geophysics and nuclear medicine. The nuclear geophysics areas discussed include geo-chronology, nuclear logging for industry, the Oklo reactor, and geo-neutrinos. The section on nuclear medicine summarizes the critical advances in nuclear imaging, including PET and SPECT imaging, targeted radionuclide therapy, and the nuclear physics of medical isotope production. Lastly, each subfield discussed requires a review article unto itself, which is not the intention of the current review; rather, the current review is intended for readers who wish to get a broad understanding of applied nuclear physics.

  15. Application of radiation imaging

    International Nuclear Information System (INIS)

    Sinha, Amar

    2004-01-01

    Imaging of radiation induced scintillations finds applications in many branches of science and technology. Over the years, many new applications of this technique have emerged. This has been possible particularly due to the development of new scintillating materials and new detectors using such scintillators. Nowhere has this development been more dramatic than in the field of century old medical imaging. Conventional film based technique has been replaced by several new detectors such as imaging plate, CCD based radiography system and flat panel detectors. In the field of x-ray crystallography replacement of film by imaging plate has reduced data reduction time from days to hours and finally use of CCD and ICCD based detectors have reduced this time to seconds and even less. In the field of non-destructive testing new techniques of 2D and 3D tomography, flow visualization has been possible due to rapid development in new scintillator and new electronic imaging detector systems incorporating such scintillators. This paper will review new frontiers in radiation imaging and describe some of the work being carried out at HPPD, BARC on various applications of radiation imaging using a variety of luminescent materials. (author)

  16. IMS applications analysis

    Energy Technology Data Exchange (ETDEWEB)

    RODACY,PHILIP J.; REBER,STEPHEN D.; SIMONSON,ROBERT J.; HANCE,BRADLEY G.

    2000-03-01

    This report examines the market potential of a miniature, hand-held Ion Mobility Spectrometer. Military and civilian markets are discussed, as well as applications in a variety of diverse fields. The strengths and weaknesses of competing technologies are discussed. An extensive Ion Mobility Spectrometry (IMS) bibliography is included. The conclusions drawn from this study are: (1) There are a number of competing technologies that are capable of detecting explosives, drugs, biological, or chemical agents. The IMS system currently represents the best available compromise regarding sensitivity, specificity, and portability. (2) The military market is not as large as the commercial market, but the military services are more likely to invest R and D funds in the system. (3) Military applications should be addressed before commercial applications are addressed. (4) There is potentially a large commercial market for rugged, hand-held Ion Mobility Spectrometer systems. Commercial users typically do not invest R and D funds in this type of equipment rather, they wait for off-the-shelf availability.

  17. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  18. Electrospinning and its applications

    International Nuclear Information System (INIS)

    Park, Jun-Seo

    2010-01-01

    Electrospinning is a process used to fabricate continuous nanoscale fibers with diameters in the sub-micrometer to nanometer range using a high-voltage power supply. Electrospun (e-spun) fibers and the non-woven webs manufactured from them have attracted considerable attention due to their outstanding characteristics, such as high porosity, small diameter, excellent pore interconnectivity and high surface-to-volume ratio. Because of the useful properties of e-spun fibers, many synthetic and natural polymers, including single and blended polymers, have been electrospun into fibers that can be employed in a variety of applications such as filtration and thermal insulation, and in the manufacture of protective clothing, sensors, conducting devices, wound dressings and scaffolds for tissue engineering. Utilizing the electrospinning technique and its product, some studies on its applications have been conducted in our lab. They included the fabrication of a conducting composite mat for electrical applications, an antibacterial web for a biomedical sector and PCM containing e-spun mat for energy storage

  19. Transactional Network Platform: Applications

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  20. Bayesian theory and applications

    CERN Document Server

    Dellaportas, Petros; Polson, Nicholas G; Stephens, David A

    2013-01-01

    The development of hierarchical models and Markov chain Monte Carlo (MCMC) techniques forms one of the most profound advances in Bayesian analysis since the 1970s and provides the basis for advances in virtually all areas of applied and theoretical Bayesian statistics. This volume guides the reader along a statistical journey that begins with the basic structure of Bayesian theory, and then provides details on most of the past and present advances in this field. The book has a unique format. There is an explanatory chapter devoted to each conceptual advance followed by journal-style chapters that provide applications or further advances on the concept. Thus, the volume is both a textbook and a compendium of papers covering a vast range of topics. It is appropriate for a well-informed novice interested in understanding the basic approach, methods and recent applications. Because of its advanced chapters and recent work, it is also appropriate for a more mature reader interested in recent applications and devel...

  1. Applicant Perspectives on the Otolaryngology Residency Application Process

    Science.gov (United States)

    2017-09-09

    82177.0 ’llrpproJlJ. Ct,r pvfJit r.,(ufe. f.li~+r:~n-1" ,,. vl\\l;.._.;tN. Applicant Perspectives on the Otolaryngology Residency Application...of the Department of Defense or its Components. • I have no financial conflicts of interest or sponsorship to disclose. Background • Applications...the Personal Statement Mandate on applications - Sources of advice and information -Suggestions for Improvement. Number of Programs Applied to

  2. Comparing Web Applications with Desktop Applications: An Empirical Study

    DEFF Research Database (Denmark)

    Pop, Paul

    2002-01-01

    of developing and using such applications. In this paper we present a comparison of web and desktop applications from the usability point of view. The comparison is based on an empirical study that investigates the performance of a group of users on two calendaring applications: Yahoo!Calendar and Microsoft...

  3. Laser Ablation for Medical Applications

    Science.gov (United States)

    Hayashi, Ken-Ichi

    Medical applications of laser are measurement, laser surgery, in-situ monitoring, and processing of medical devices. In this paper, author briefly reviews the trends of medical applications, describes some new applications, and then discuss about the future trends and problems of medical applications. At present, the domestic market of laser equipment for medical applications is nearly 1/10 of that for industrial applications, which has registered significant growth continuously. Laser surgery as a minimum invasive surgery under arthroscope is expected to decrease the pain of patients. Precise processing such as cutting and welding is suitable for manufacturing medical devices. Pulsed laser deposition has been successfully applied to the thin film coating. The corneal refractive surgery by ArF excimer laser has been widely accepted for its highly safe operation. Laser ablation for retinal implant in the visual prosthesis is one of the promising applications of laser ablation in medicine. New applications with femtosecond laser are expected in the near future.

  4. Android application development with Maven

    CERN Document Server

    Papapetrou, Patroklos

    2015-01-01

    Android Application Development with Maven is intended for Android developers or devops engineers who want to use Maven to effectively develop quality Android applications. It would be helpful, but not necessary, if you have some previous experience with Maven.

  5. Finite mathematics models and applications

    CERN Document Server

    Morris, Carla C

    2015-01-01

    Features step-by-step examples based on actual data and connects fundamental mathematical modeling skills and decision making concepts to everyday applicability Featuring key linear programming, matrix, and probability concepts, Finite Mathematics: Models and Applications emphasizes cross-disciplinary applications that relate mathematics to everyday life. The book provides a unique combination of practical mathematical applications to illustrate the wide use of mathematics in fields ranging from business, economics, finance, management, operations research, and the life and social sciences.

  6. Applications of nonlinear fiber optics

    CERN Document Server

    Agrawal, Govind

    2008-01-01

    * The only book describing applications of nonlinear fiber optics * Two new chapters on the latest developments: highly nonlinear fibers and quantum applications* Coverage of biomedical applications* Problems provided at the end of each chapterThe development of new highly nonlinear fibers - referred to as microstructured fibers, holey fibers and photonic crystal fibers - is the next generation technology for all-optical signal processing and biomedical applications. This new edition has been thoroughly updated to incorporate these key technology developments.The bo

  7. Ultrabroadband spectroscopy for security applications

    DEFF Research Database (Denmark)

    Engelbrecht, Sunniva; Berge, Luc; Skupin, Stefan

    2015-01-01

    Ultrabroadband spectroscopy is a promising novel approach to overcome two major hurdles which have so far limited the application of THz spectroscopy for security applications: the increased bandwidth enables to record several characteristic spectroscopic features and the technique allows...... evaluation of the technique for defense and civil security applications....

  8. Medical Professionals and Smartphone Applications.

    Science.gov (United States)

    Arunagiri, Varun; Parimala, M; Ragumani, P; Anbalagan, Kothai

    2017-06-01

    Ever since the advent of Smartphones, Smartphone applications (SAs) are revolutionizing the contemporary medicine. Smartphone application which was created in view of swift communications among the general public has now intruded the medical fraternity. But the ethics for using these applications to transfer patients' medical records through SA is bewildering among the medical professionals (MPs).

  9. Pervasive Application Rights Management Architecture

    OpenAIRE

    Dusparic, Ivana

    2005-01-01

    This dissertation describes an application rights management architecture that combines license management with digital rights management to provide an integrated platform for the specification, generation, delivery and management of application usage rights for pervasive computing environments. A new rights expression language is developed, extended from the existing language, ODRL, which allows the expression of mobile application usage rights and supports fine-grained usage ...

  10. Shopify application development

    CERN Document Server

    Larkin, Michael

    2014-01-01

    This is an easy-to follow manual that will guide you through the entire process of application development with Shopify, beginning with the installation and configuration of your local development environment for your app to the deployment of the app to Heroku. If you are a web developer or a designer who wants to extend Shopify stores by building apps, then this book is for you. A basic understanding of programming concepts and some familiarity with Shopify is all that is required to get started with Shopify app development.

  11. Industrial applications of cyclotrons

    International Nuclear Information System (INIS)

    Ditroi, F.

    1998-01-01

    Since the putting into operation of the Debrecen Cyclotron Laboratory with an MGC-20E (or U-103) machine, a lot of demands have been emerged on the practical exploitation of this facility. Since the cyclotron works at least in one half of its running time for medical purposes (isotope production), the rest can be devoted for fundamental research and practical applications. Special beam lines and laboratory facilities have been built for the purposes of materials investigation. These are mainly irradiation chambers, special irradiation facilities and sample holder/changers as well as special laboratory facilities for sample preparation and low background measurements

  12. Photocathodes in accelerator applications

    International Nuclear Information System (INIS)

    Fraser, J.S.; Sheffield, R.L.; Gray, E.R.; Giles, P.M.; Springer, R.W.; Loebs, V.A.

    1987-01-01

    Some electron accelerator applications require bursts of short pulses at high microscopic repetition rates and high peak brightness. A photocathode, illuminated by a mode-locked laser, is well suited to filling this need. The intrinsic brightness of a photoemitter beam is high; experiments are under way at Los Alamos to study the brightness of short bunches with high space charge after acceleration. A laser-illuminated Cs 3 Sb photoemitter is located in the first rf cavity of an injector linac. Diagnostics include a pepper-pot emittance analyzer, a magnetic spectrometer, and a streak camera

  13. Product Licenses Database Application

    CERN Document Server

    Tonkovikj, Petar

    2016-01-01

    The goal of this project is to organize and centralize the data about software tools available to CERN employees, as well as provide a system that would simplify the license management process by providing information about the available licenses and their expiry dates. The project development process is consisted of two steps: modeling the products (software tools), product licenses, legal agreements and other data related to these entities in a relational database and developing the front-end user interface so that the user can interact with the database. The result is an ASP.NET MVC web application with interactive views for displaying and managing the data in the underlying database.

  14. Android Studio application development

    CERN Document Server

    Zapata, Belén Cruz

    2013-01-01

    A practical guide, which will show you how to create Android applications using the new Google official IDE, Android Studio.If you are a developer who wants to learn the key features of Android Studio, and learn how to create their first app, this book is ideal for you! Developers interested in this book should be familiar with the object- oriented programming paradigm, and the Java programming language. It is also recommended that you understand the main characteristics of the Android mobile system.

  15. Nuclear cratering applications

    International Nuclear Information System (INIS)

    Williamson, M.M.

    1969-01-01

    The development of nuclear excavation technology is based on the promise that the relatively inexpensive energy available from thermonuclear explosives can be used to simultaneously break and move age quantities of rock and earth economically and safety. This paper discusses the economic and other advantages of using nuclear excavation for large engineering projects. A brief description of the phenomenology of nuclear excavation is given. Each of the several proposed general applications of nuclear excavation is discussed to include a few specific example of possible nuclear excavation projects. The discussion includes nuclear excavation for harbors, canals, terrain transits, aggregate production, mining and water resource development and conservation. (author)

  16. Unix Application Migration Guide

    CERN Document Server

    Microsoft. Redmond

    2003-01-01

    Drawing on the experience of Microsoft consultants working in the field, as well as external organizations that have migrated from UNIX to Microsoft® Windows®, this guide offers practical, prescriptive guidance on the issues you are likely to face when porting existing UNIX applications to the Windows operating system environment. Senior IT decision makers, network managers, and operations managers will get real-world guidance and best practices on planning and implementation issues to understand the different methods through which migration or co-existence can be accomplished. Also detailing

  17. Heroku cloud application development

    CERN Document Server

    Hanjura, Anubhav

    2014-01-01

    An easy-to-follow, hands-on guide that clearly explains the various components of the Heroku platform and provides step-by-step guidance as well as numerous examples on how to build and troubleshoot robust and scalable production-ready web applications on the Heroku platform.This book is intended for those who want to learn Heroku the right way. Perhaps you are new to Heroku or are someone who has heard about Heroku but have not built anything significant with it. You should have knowledge or familiarity with cloud computing and basic knowledge of database and network deployment.

  18. Games, theory and applications

    CERN Document Server

    Thomas, L C

    2011-01-01

    Anyone with a knowledge of basic mathematics will find this an accessible and informative introduction to game theory. It opens with the theory of two-person zero-sum games, two-person non-zero sum games, and n-person games, at a level between nonmathematical introductory books and technical mathematical game theory books. Succeeding sections focus on a variety of applications - including introductory explanations of gaming and meta games - that offer nonspecialists information about new areas of game theory at a comprehensible level. Numerous exercises appear with full solutions, in addition

  19. Cold regions isotope applications

    Energy Technology Data Exchange (ETDEWEB)

    Perrigo, L.D.; Divine, T.E.

    1976-04-01

    Pacific Northwest Laboratories (PNL) started the Cold Regions Isotope Applications Program in FY-1975 to identify special conditions in the Arctic and similar geographic areas (Cold Regions) where radioisotope power, heater, or sterilization systems would be desirable and economically viable. Significant progress was made in the first year of this program and all objectives for this initial 12-month period were achieved. The major conclusions and recommendations resulting for this effort are described below. The areas of interest covered include: radiosterilization of sewage; heating of septic tanks; and radioisotope thermoelectric generators as power sources for meteorological instruments and navigational aids. (TFD)

  20. Web Application Frameworks

    Directory of Open Access Journals (Sweden)

    Maria Cristina ENACHE

    2015-12-01

    Full Text Available As modern browsers become more powerful with rich features, building full-blown web applications in JavaScript is not only feasible, but increasingly popular. Based on trends on HTTP Archive, deployed JavaScript code size has grown 45% over the course of the year. MVC offers architectural benefits over standard JavaScript — it helps you write better organized, and therefore more maintainable code. This pattern has been used and extensively tested over multiple languages and generations of programmers. It's no coincidence that many of the most popular web programming frameworks also encapsulate MVC principles: Django, Ruby on Rails, CakePHP, Struts, or Laravell.

  1. Optimization Foundations and Applications

    CERN Document Server

    Miller, H Ronald

    2011-01-01

    A thorough and highly accessible resource for analysts in a broad range of social sciences. Optimization: Foundations and Applications presents a series of approaches to the challenges faced by analysts who must find the best way to accomplish particular objectives, usually with the added complication of constraints on the available choices. Award-winning educator Ronald E. Miller provides detailed coverage of both classical, calculus-based approaches and newer, computer-based iterative methods. Dr. Miller lays a solid foundation for both linear and nonlinear models and quickly moves on to dis

  2. Nonextensive entropy interdisciplinary applications

    CERN Document Server

    Tsallis, Constantino

    2004-01-01

    A great variety of complex phenomena in many scientific fields exhibit power-law behavior, reflecting a hierarchical or fractal structure. Many of these phenomena seem to be susceptible to description using approaches drawn from thermodynamics or statistical mechanics, particularly approaches involving the maximization of entropy and of Boltzmann-Gibbs statistical mechanics and standard laws in a natural way. The book addresses the interdisciplinary applications of these ideas, and also on various phenomena that could possibly be quantitatively describable in terms of these ideas.

  3. Microsystems for Space Applications

    Directory of Open Access Journals (Sweden)

    B. Palán

    2000-01-01

    Full Text Available Recent progress in microsystems technologies make them suitable for the space research and development due to their low volume, low mass, low power consumption, leading to reduced mission cost. The most interesting approach is using standard technologies with additional post-processing steps to realize sensors and actuators together with signal processing circuits. This paper summarises some aspects and difficulties of the space environment. The radiation effects in space are described and damage on CMOS structures are explained. Design methodologies for hardening microsystems and MOS based circuits against these effects are presented. Some examples of microsystems examples for space applications fabricated by researches world-wide are given.

  4. Application testing with Capybara

    CERN Document Server

    Robbins, Matthew

    2013-01-01

    Start performing integration testing with Capybara immediately. This book will get you up and running quickly and assumes no knowledge or experience of the technology.This book is for developers and testers who have had some exposure to Ruby but who want to know how to test their applications using Capybara and its compatible drivers, such as Selenium-Webdriver and Rack-Test. The examples are deliberately kept simple and example HTML mark-up is always included so that you can copy the examples to practice and experiment on your own machine.

  5. Best Sale Mobile Application

    OpenAIRE

    Chittugnanamoorthy, Balakumar

    2014-01-01

    The aim of this thesis was to find a best way to advertise short-term sales and reduce paper waste. Another aim was to help the seller to identify a potential customer for a specific product, by means of providing a number of people accessing an advertisement. A mobile phone is one of the widely used electronic devices by many people. Modern mobile phones support a good internet connection. Also, people carry their mobile devices with them even outside their homes. So a mobile application ...

  6. Visual languages and applications

    CERN Document Server

    Zhang, Kang

    2010-01-01

    Visual languages have long been a pursuit of effective communication between human and machine. With rapid advances of the Internet and Web technology, human-human communication through the Web or electronic mobile devices is becoming more and more prevalent. Visual Languages and Applications is a comprehensive introduction to diagrammatical visual languages. This book discusses what visual programming languages are, and how such languages and their underlying foundations can be usefully applied to other fields in computer science. It also covers a broad range of contents from the underlying t

  7. Industrial applications of radiations

    International Nuclear Information System (INIS)

    Gallien, C.L.

    1988-01-01

    Radiation processing refers to the use of ionizing radiation to initiate chemical or biological changes in various materials as a substitute for conventional thermal or chemical processes. The method was inroduced in the industrial field 30 years ago and is now being widely used for numerous applications, among which industrial radiography, polymer modification, sterilization or decontamination, and food preservation. Both electron beam accelerators and gamma sources can be used, depending mainly of the amount of radiation and the penetration required. Radiation processing presents an increasing economical importance; in 1986 the market volume of ionized products ranged 3 billion $ [fr

  8. Synchrotron radiation and applications

    International Nuclear Information System (INIS)

    Nenner, I.; Dexpert, H.; Bessiere, M.

    1989-01-01

    Synchrotron radiation gives a very large wavelength spectra from infrared to X-rays. The continuous spectra in the far ultraviolet and X rays and also the brightness of the source enlarge the studies of structural and electronic properties of matter. In a brief review of main applications, the paper presents more particularly absorption, diffusion and diffraction phenomena. Examples taken in inorganic chemistry and condensed matter physics show the power of X-ray aborption spectroscopy and electron spectroscopy methods (angular analysis of photoelectrons and mass spectroscopy) for the study of surfaces and solids. 51 refs [fr

  9. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Letolle, R.; Mariotti, A.; Bariac, T.

    1991-06-01

    This report reviews the historical background and the properties of stable isotopes, the methods used for their measurement (mass spectrometry and others), the present technics for isotope enrichment and separation, and at last the various present and foreseeable application (in nuclear energy, physical and chemical research, materials industry and research; tracing in industrial, medical and agronomical tests; the use of natural isotope variations for environmental studies, agronomy, natural resources appraising: water, minerals, energy). Some new possibilities in the use of stable isotope are offered. A last chapter gives the present state and forecast development of stable isotope uses in France and Europe

  10. Ultracapacitors for automotive applications

    Energy Technology Data Exchange (ETDEWEB)

    Ashtiani, Cyrus [DaimlerChrysler Corp., CIMS 526-00-00, 1870 Technology Dr., Troy, MI 48083 (United States); Wright, Randy; Hunt, Gary [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 834415-3830 (United States)

    2006-03-21

    In response to a growing consensus in the auto industry that ultracapacitors can potentially play a key role in the modern vehicle power distribution network, a task force was created at the United States Advanced Battery Consortium (USABC) to tackle issues facing the fledging industry. The task force embarked on first developing and establishing standards for performance and abuse tolerance of ultracapacitors in collaboration with the U.S. Department of Energy and National Labs. Subsequently, potential applications in the automotive industry were identified and a consensus requirement specification was drawn as a development guide for the industry. (author)

  11. Electronic circuits fundamentals & applications

    CERN Document Server

    Tooley, Mike

    2015-01-01

    Electronics explained in one volume, using both theoretical and practical applications.New chapter on Raspberry PiCompanion website contains free electronic tools to aid learning for students and a question bank for lecturersPractical investigations and questions within each chapter help reinforce learning Mike Tooley provides all the information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The

  12. Applications in solid mechanics

    DEFF Research Database (Denmark)

    Ølgaard, Kristian Breum; Wells, Garth N.

    2012-01-01

    Problems in solid mechanics constitute perhaps the largest field of application of finite element methods. The vast majority of solid mechanics problems involve the standard momentum balance equation, posed in a Lagrangian setting, with different models distinguished by the choice of nonlinear...... or linearized kinematics, and the constitutive model for determining the stress. For some common models, the constitutive relationships are rather complex. This chapter addresses a number of canonical solid mechanics models in the context of automated modeling, and focuses on some pertinent issues that arise...

  13. Metagenomics and Applications

    Directory of Open Access Journals (Sweden)

    L Rafati

    2016-11-01

    Full Text Available Introduction: Bacteria are a group of microorganisms which in contrast to their diversity in nature, only very few of them can be grown and isolated in the current standard laboratories. Metagenomics as a new field of research, during the last decade has worked on clarification of the genomes of the non-cultured microbes and researchers around the world with serious study of this group of bacteria, looking for new compounds such as new antibiotics, anti-cancer agents, new enzymes and biomolecules. Methods: This article is reviews study which with study of Texts and Internet and handy browsing of key words from reliable scientific resources and sites amongst: Google Scholar, Pub med, Science direct, Sid and Scopus in the years 2000 to 2013 were collected and studied. Results: The data collection instrument in the study includes all printed metagenomics related texts. Although, nowadays metagenomics is used to screen samples but now as a perfect technique beside the medium application and other traditional techniques will have better position. The highest usage of metagenomics is in clinical cases where with conventional techniques can't be discovered microbial reasons. So for tests and analyze information need to skilled scientists. Conclusion: This paper focuses on some of the latest achievements of Metagenomics and its application in new drugs, detection of enzymes, potential of biotechnology and environment.

  14. Surety applications in transportation

    Energy Technology Data Exchange (ETDEWEB)

    Matalucci, R.V.; Miyoshi, D.S.

    1998-01-01

    Infrastructure surety can make a valuable contribution to the transportation engineering industry. The lessons learned at Sandia National Laboratories in developing surety principles and technologies for the nuclear weapons complex and the nuclear power industry hold direct applications to the safety, security, and reliability of the critical infrastructure. This presentation introduces the concepts of infrastructure surety, including identification of the normal, abnormal, and malevolent threats to the transportation infrastructure. National problems are identified and examples of failures and successes in response to environmental loads and other structural and systemic vulnerabilities are presented. The infrastructure surety principles developed at Sandia National Laboratories are described. Currently available technologies including (a) three-dimensional computer-assisted drawing packages interactively combined with virtual reality systems, (b) the complex calculational and computational modeling and code-coupling capabilities associated with the new generation of supercomputers, and (c) risk-management methodologies with application to solving the national problems associated with threats to the critical transportation infrastructure are discussed.

  15. Application of radiation nowadays

    International Nuclear Information System (INIS)

    Habibah Adnan

    2009-01-01

    Despite of scientist know about radiation since 1890, but they have successfully developed many of application to help human life. Now, we can see that radiation was applied in medical, academic, industrial, and generating electricity. Besides that, radiations also have other applications that can help in agriculture activities, archaeology, legislation, geology, space exploration and many more. In hospital, doctor use nuclear medicine to trace, monitor and save almost thousands of people every year. According to research, 7 out of 10 American citizens had already use this services at least once in their life. Universities, college, secondary school, research center also use nuclear material in their laboratory. For example, through research, radiation can help in plants study, agriculture technique, soils study and others. Industrial sector are one sector that applied radiation widely. For example, radiation can kill almost 80 % bacteria or dangerous microorganism in food or export products. Nowadays, radiation cannot be curtailed although it can give more benefit more than risk. It depends on how we manage it.

  16. Environmental applications for biosurfactants

    International Nuclear Information System (INIS)

    Mulligan, Catherine N.

    2005-01-01

    Biosurfactants are surfactants that are produced extracellularly or as part of the cell membrane by bacteria, yeasts and fungi. Examples include Pseudomonas aeruginosa which produces rhamnolipids, Candida (formerly Torulopsis) bombicola, one of the few yeasts to produce biosurfactants, which produces high yields of sophorolipids from vegetable oils and sugars and Bacillus subtilis which produces a lipopeptide called surfactin. This review includes environmental applications of these biosurfactants for soil and water treatment. Biosurfactant applications in the environmental industries are promising due to their biodegradability, low toxicity and effectiveness in enhancing biodegradation and solubilization of low solubility compounds. However, more information is needed to be able to predict and model their behaviour. Full scale tests will be required. The role of biosurfactants in natural attenuation processes has not been determined. Very little information is available concerning the influence of soil components on the remediation process with biosurfactants. As most of the research until now has been performed with rhamnolipids, other biosurfactants need to be investigated as they may have more promising properties. - More information is needed to be able to predict and model the behaviour of biosurfactants

  17. Environmental applications for biosurfactants

    Energy Technology Data Exchange (ETDEWEB)

    Mulligan, Catherine N. [Department Building, Civil and Environmental Engineering, Concordia University, 1455 de Maisonneuve Boulevard W., Montreal, Quebec, H3G 1M8 (Canada)]. E-mail: mulligan@civil.concordia.ca

    2005-01-01

    Biosurfactants are surfactants that are produced extracellularly or as part of the cell membrane by bacteria, yeasts and fungi. Examples include Pseudomonas aeruginosa which produces rhamnolipids, Candida (formerly Torulopsis) bombicola, one of the few yeasts to produce biosurfactants, which produces high yields of sophorolipids from vegetable oils and sugars and Bacillus subtilis which produces a lipopeptide called surfactin. This review includes environmental applications of these biosurfactants for soil and water treatment. Biosurfactant applications in the environmental industries are promising due to their biodegradability, low toxicity and effectiveness in enhancing biodegradation and solubilization of low solubility compounds. However, more information is needed to be able to predict and model their behaviour. Full scale tests will be required. The role of biosurfactants in natural attenuation processes has not been determined. Very little information is available concerning the influence of soil components on the remediation process with biosurfactants. As most of the research until now has been performed with rhamnolipids, other biosurfactants need to be investigated as they may have more promising properties. - More information is needed to be able to predict and model the behaviour of biosurfactants.

  18. Novel oral laser applications

    Science.gov (United States)

    Yousif, A.; Strassl, M.; Beer, F.; Verhagen, L.; Wittschier, M.; Wintner, E.

    2007-03-01

    In dental hard tissue ablation, ultra-short laser pulses have proven sufficiently their potential for material ablation with negligible collateral damage providing many advantages. The absence of micro-cracks and the possibility to avoid overheating of the pulp during dental cavity preparation may be among the most important issues, the latter opening up an avenue for potential painless treatment. Beside the evident short interaction time of laser radiation with the irradiated tissue, scanning of the ultra-short pulse trains turned out to be crucial for ablating cavities of required quality and shape. Additionally, long-pulsed laser systems have demonstrated successfully their suitability for decontamination purposes. In this paper, an overview of different indications for laser application in dental therapies in both pulse regimes is presented. A special focus is set on the decontamination of dental implants in periimplantitis therapy. Having employed commercially available long pulse systems for dental applications and ultra-short 330 fs pulses, we present first results for temperature development and corresponding ablation thresholds for dental implants, as in the future more gentle implant cleaning by ultra-short laser pulses could become of interest.

  19. Berkovich spaces and applications

    CERN Document Server

    Favre, Charles; Nicaise, Johannes

    2015-01-01

    We present an introduction to Berkovich’s theory of non-archimedean analytic spaces that emphasizes its applications in various fields. The first part contains surveys of a foundational nature, including an introduction to Berkovich analytic spaces by M. Temkin, and to étale cohomology by A. Ducros, as well as a short note by C. Favre on the topology of some Berkovich spaces. The second part focuses on applications to geometry. A second text by A. Ducros contains a new proof of the fact that the higher direct images of a coherent sheaf under a proper map are coherent, and B. Rémy, A. Thuillier and A. Werner provide an overview of their work on the compactification of Bruhat-Tits buildings using Berkovich analytic geometry. The third and final part explores the relationship between non-archimedean geometry and dynamics. A contribution by M. Jonsson contains a thorough discussion of non-archimedean dynamical systems in dimension 1 and 2. Finally a survey by J.-P. Otal gives an account of Morgan-Shalen's the...

  20. Oracle Application Express 4 Recipes

    CERN Document Server

    Zehoo, Edmund

    2011-01-01

    Oracle Application Express 4 Recipes provides an example-based approach to learning Application Express - the ground-breaking, rapid application development platform included with every Oracle Database license. The recipes format is ideal for the quick-study who just wants a good example or two to kick start their thinking and get pointed in the right direction. The recipes cover the gamut of Application Express development. Author and Application Express expert Edmund Zehoo shows how to create data entry screens, visualize data in the form of reports and charts, implement validation and back-

  1. Direct application of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Reistad, G.M.

    1980-01-01

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

  2. Applications of high power microwaves

    International Nuclear Information System (INIS)

    Benford, J.; Swegle, J.

    1993-01-01

    The authors address a number of applications for HPM technology. There is a strong symbiotic relationship between a developing technology and its emerging applications. New technologies can generate new applications. Conversely, applications can demand development of new technological capability. High-power microwave generating systems come with size and weight penalties and problems associated with the x-radiation and collection of the electron beam. Acceptance of these difficulties requires the identification of a set of applications for which high-power operation is either demanded or results in significant improvements in peRFormance. The authors identify the following applications, and discuss their requirements and operational issues: (1) High-energy RF acceleration; (2) Atmospheric modification (both to produce artificial ionospheric mirrors for radio waves and to save the ozone layer); (3) Radar; (4) Electronic warfare; and (5) Laser pumping. In addition, they discuss several applications requiring high average power than border on HPM, power beaming and plasma heating

  3. Turning Time from Enemy into an Ally Using the Pomodoro Technique

    Science.gov (United States)

    Wang, Xiaofeng; Gobbo, Federico; Lane, Michael

    Time is one of the most important factors dominating agile software development processes in distributed settings. Effective time management helps agile teams to plan and monitor the work to be performed, and create and maintain a fast yet sustainable pace. The Pomodoro Technique is one promising time management technique. Its application and adaptation in Sourcesense Milan Team surfaced various benefits, challenges and implications for distributed agile software development. Lessons learnt from the experiences of Sourcesense Milan Team can be useful for other distributed agile teams to turn time from enemy into an ally.

  4. Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Freihaut, Jim [Pennsylvania State Univ., University Park, PA (United States)

    2013-09-30

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

  5. Security in Computer Applications

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture addresses the following question: how to create secure software? The lecture starts with a definition of computer security and an explanation of why it is so difficult to achieve. It then introduces the main security principles (like least-privilege, or defense-in-depth) and discusses security in different phases of the software development cycle. The emphasis is put on the implementation part: most common pitfalls and security bugs are listed, followed by advice on best practice for security development. The last part of the lecture covers some miscellaneous issues like the use of cryptography, rules for networking applications, and social engineering threats. This lecture was first given on Thursd...

  6. Laser applications in neurosurgery

    Science.gov (United States)

    Cerullo, Leonard J.

    1985-09-01

    The "false start" of the laser in neurosurgery should not be misconstrued as a denial of the inherent advantages of precision and gentleness in dealing with neural tissue. Rather, early investigators were frustrated by unrealistic expectations, cumbersome equipment, and a general ignorance of microtechnique. By the early 70s, microneurosurgery was well established, surgical laser equipment for free hand and microlinked application had been developed, and a more realistic view of the limitations of the laser had been established. Consequently, the late 70s really heralded the renaissance of the laser in neurosurgery. Since then, there has been an overwhelming acceptance of the tool in a variety of clinical situations, broadly categorized in five groups. 1)|Perhaps the most generally accepted area is in the removal of extra-axial tumors of the brain and spinal cord. These tumors, benign by histology but treacherous by location, do not present until a significant amount of neurological compensation has already occurred. The application of additional trauma to the neural tissue, whether by further tumor growth or surgical manipulation, frequently results in irreversible damage. Here, the ability of the laser to vaporize tissue, in a fairly hemostatic fashion, without mechanical or thermal damage to sensitive surrounding tissues, is essential. 2)|The ability to incise delicate neural tissue with minimal spread of thermal destruction to adjacent functioning tissue makes the laser the ideal instrument when tumors deep under the surface are encountered in the brain or spinal cord. Thus, the second group of applications is in the transgression of normal neural structures to arrive at deeper pathological tissue. 3)|The third area of benefit for the laser in neurosurgery has been in the performance of neuroablative procedures, calling for deliberate destruction of functioning neural tissue in a controlled fashion. Again, the precision and shape confinement of the destructive

  7. Tensors and their applications

    CERN Document Server

    Islam, Nazrul

    2006-01-01

    About the Book: The book is written is in easy-to-read style with corresponding examples. The main aim of this book is to precisely explain the fundamentals of Tensors and their applications to Mechanics, Elasticity, Theory of Relativity, Electromagnetic, Riemannian Geometry and many other disciplines of science and engineering, in a lucid manner. The text has been explained section wise, every concept has been narrated in the form of definition, examples and questions related to the concept taught. The overall package of the book is highly useful and interesting for the people associated with the field. Contents: Preliminaries Tensor Algebra Metric Tensor and Riemannian Metric Christoffel`s Symbols and Covariant Differentiation Riemann-Christoffel Tensor The e-Systems and the Generalized Krönecker Deltas Geometry Analytical Mechanics Curvature of a Curve, Geodesic Parallelism of Vectors Ricci`s Coefficients of Rotation and Congruence Hyper Surfaces

  8. Interpretation and clinical applications

    International Nuclear Information System (INIS)

    Higgins, C.B.

    1987-01-01

    This chapter discusses the factors to be kept in mind during routine interpretation of MR images. This includes the factors that determine contrast on standard spin-echo images and some distinguishing features between true lesions and artifactually simulated lesions. This chapter also indicates the standard protocols for MRI of various portions of the body. Finally, the current indications for MRI of various portions of the body are suggested; however, it is recognized that the indications for MRI are rapidly increasing and consequently, at the time of publication of this chapter, it is likely that many more applications will have become evident. Interpretation of magnetic resonance (MR) images requires consideration of anatomy and tissue characteristics and extraction of artifacts resulting from motion and other factors

  9. Bilevel Programming and Applications

    Directory of Open Access Journals (Sweden)

    Vyacheslav V. Kalashnikov

    2015-01-01

    Full Text Available A great amount of new applied problems in the area of energy networks has recently arisen that can be efficiently solved only as mixed-integer bilevel programs. Among them are the natural gas cash-out problem, the deregulated electricity market equilibrium problem, biofuel problems, a problem of designing coupled energy carrier networks, and so forth, if we mention only part of such applications. Bilevel models to describe migration processes are also in the list of the most popular new themes of bilevel programming, as well as allocation, information protection, and cybersecurity problems. This survey provides a comprehensive review of some of the above-mentioned new areas including both theoretical and applied results.

  10. Phase transitions modern applications

    CERN Document Server

    Gitterman, Moshe

    2014-01-01

    This book provides a comprehensive review of the theory of phase transitions and its modern applications, based on the five pillars of the modern theory of phase transitions i.e. the Ising model, mean field, scaling, renormalization group and universality. This expanded second edition includes, along with a description of vortices and high temperature superconductivity, a discussion of phase transitions in chemical reaction and moving systems. The book covers a close connection between phase transitions and small world phenomena as well as scale-free systems such as the stock market and the Internet. Readership: Scientists working in different fields of physics, chemistry, biology and economics as well as teaching material for undergraduate and graduate courses.

  11. Stochastic calculus and applications

    CERN Document Server

    Cohen, Samuel N

    2015-01-01

    Completely revised and greatly expanded, the new edition of this text takes readers who have been exposed to only basic courses in analysis through the modern general theory of random processes and stochastic integrals as used by systems theorists, electronic engineers and, more recently, those working in quantitative and mathematical finance. Building upon the original release of this title, this text will be of great interest to research mathematicians and graduate students working in those fields, as well as quants in the finance industry. New features of this edition include: End of chapter exercises; New chapters on basic measure theory and Backward SDEs; Reworked proofs, examples and explanatory material; Increased focus on motivating the mathematics; Extensive topical index. "Such a self-contained and complete exposition of stochastic calculus and applications fills an existing gap in the literature. The book can be recommended for first-year graduate studies. It will be useful for all who intend to wo...

  12. Piezoresistor design and applications

    CERN Document Server

    Doll, Joseph C

    2013-01-01

    This book is a comprehensive guide to piezoresistive MEMS sensor design. Piezoresistors transduce mechanical loads into electrical signals via a resistance change, and comprise a substantial portion of the commercial MEMS sensors market. Applications of piezoresistors include strain gauges, accelerometers, pressure sensors, force sensors, chemical sensors and resonators. This book also: ·         Demonstrates how the latest piezoresistor models and optimization techniques can be integrated for high performance piezoresistor design ·         Covers in detail piezoresistor sensitivity and noise models, signal conditioning, fabrication processes, low-power design and numerical optimization techniques ·         Provides an up-to-date discussion of alternative piezoresistive materials and MEMS transduction techniques ·         Explores in detail the tradeoffs in size, performance and complexity between piezoresistive sensing and popular alternatives (capacitive, piezoelectric an...

  13. THz and Security Applications

    CERN Document Server

    Sizov, Fedir; Detectors, Sources and Associated Electronics for THz Applications

    2014-01-01

    These proceedings comprise invited papers from highly experienced researchers in THz technology and security applications. THz detection of explosives represents one of the most appealing technologies to have recently emerged in dealing with terrorist attacks encountered by civil security and military forces throughout the world. Discussed are the most advanced technologies and developments, the various points of operational strength and weaknesses as well as are suggestions and predictions the best technological solutions to  overcome current operational limits.  The current status of various levels of cooling in THz detectors, sources and associated electronics are also addressed. The goal was to provide a clear view on the current technologies available and the required advances needed in order to achieve more efficient systems. This goal was outlined in part by establishing the baseline of current uncertainty estimations in physics-based modelling and the identification of key areas which require additi...

  14. Best matching theory & applications

    CERN Document Server

    Moghaddam, Mohsen

    2017-01-01

    Mismatch or best match? This book demonstrates that best matching of individual entities to each other is essential to ensure smooth conduct and successful competitiveness in any distributed system, natural and artificial. Interactions must be optimized through best matching in planning and scheduling, enterprise network design, transportation and construction planning, recruitment, problem solving, selective assembly, team formation, sensor network design, and more. Fundamentals of best matching in distributed and collaborative systems are explained by providing: § Methodical analysis of various multidimensional best matching processes § Comprehensive taxonomy, comparing different best matching problems and processes § Systematic identification of systems’ hierarchy, nature of interactions, and distribution of decision-making and control functions § Practical formulation of solutions based on a library of best matching algorithms and protocols, ready for direct applications and apps development. Design...

  15. Persuasive Mobile Health Applications

    Science.gov (United States)

    Garcia Wylie, Carlos; Coulton, Paul

    With many industrialized societies bearing the cost of an increasingly sedentary lifestyle on the health of their populations there is a need to find new ways of encouraging physical activity to promote better health and well being. With the increasing power of mobile phones and the recent emergence of personal heart rate monitors, aimed at dedicated amateur runners, there is now a possibility to develop “Persuasive Mobile Health Applications” to promote well being through the use of real-time physiological data and persuade users to adopt a healthier lifestyle. In this paper we present a novel general health monitoring software for mobile phones called Heart Angel. This software is aimed at helping users monitor, record, as well as improve their fitness level through built-in cardio-respiratory tests, a location tracking application for analyzing heart rate exertion over time and location, and a fun mobile-exergame called Health Defender.

  16. Applications of cerebral SPECT

    Energy Technology Data Exchange (ETDEWEB)

    McArthur, C., E-mail: claire.mcarthur@nhs.net [Department of Neuroradiology, Institute of Neurological Sciences, Glasgow (United Kingdom); Jampana, R.; Patterson, J.; Hadley, D. [Department of Neuroradiology, Institute of Neurological Sciences, Glasgow (United Kingdom)

    2011-07-15

    Single-photon emission computed tomography (SPECT) can provide three-dimensional functional images of the brain following the injection of one of a series of radiopharmaceuticals that crosses the blood-brain barrier and distributes according to cerebral perfusion, neurotransmitter, or cell density. Applications include differentiating between the dementias, evaluating cerebrovascular disease, preoperative localization of epileptogenic foci, diagnosing movement disorders, and evaluation of intracerebral tumours, while also proving a useful research tool. Unlike positronemission tomography (PET), SPECT imaging is widely available and can be performed in any department that has access to a rotating gamma camera. The purpose of this review is to demonstrate the utility of cerebral SPECT and increase awareness of its role in the investigation of neurological and psychiatric disorders.

  17. Web Platform Application

    Energy Technology Data Exchange (ETDEWEB)

    Paulsworth, Ashley [Sunvestment Group, Frederick, MD (United States); Kurtz, Jim [Sunvestment Group, Frederick, MD (United States); Brun de Pontet, Stephanie [Sunvestment Group, Frederick, MD (United States)

    2016-06-15

    Sunvestment Energy Group (previously called Sunvestment Group) was established to create a web application that brings together site hosts, those who will obtain the energy from the solar array, with project developers and funders, including affinity investors. Sunvestment Energy Group (SEG) uses a community-based model that engages with investors who have some affinity with the site host organization. In addition to a financial return, these investors receive non-financial value from their investments and are therefore willing to offer lower cost capital. This enables the site host to enjoy more savings from solar through these less expensive Community Power Purchase Agreements (CPPAs). The purpose of this award was to develop an online platform to bring site hosts and investors together virtually.

  18. Applications for electronic documents

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1995-01-01

    This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

  19. Applications of magnetic sails

    Science.gov (United States)

    Love, S. G.; Andrews, D. G.

    The interplanetary magnetic sail is a low-thrust propulsion device that derives its motive power from the interaction of solar wind ions with the magnetic field of a circular current-bearing loop of superconducting cable. The principal advantage of a magnetic sail is that it produces thrust in opposition to the sun's gravity without consuming any propellant whatsoever. The low acceleration of a magnetic sail restricts its applicability to missions that do not demand rapid changes in velocity. In many cases, though, that disadvantage is overwhelmed by the desirability of a system that does not have to be refuelled. Missions well suited for magnetic sails include propulsion for a robot asteroid surveyor, orbital correction for structures in unstable libration points, motive power for orbital correction near planets with magnetic fields, and aerobraking in planetary ionospheres.

  20. Information science and applications

    CERN Document Server

    2015-01-01

    This proceedings volume provides a snapshot of the latest issues encountered in technical convergence and convergences of security technology.  It explores how information science is core to most current research, industrial and commercial activities and consists of contributions covering topics including Ubiquitous Computing, Networks and Information Systems, Multimedia and Visualization, Middleware and Operating Systems, Security and Privacy, Data Mining and Artificial Intelligence, Software Engineering, and Web Technology.   The proceedings introduce the most recent information technology and ideas, applications and problems related to technology convergence, illustrated through case studies, and reviews converging existing security techniques.  Through this volume, readers will gain an understanding of the current state-of-the-art in information strategies and technologies of convergence security. The intended readership are researchers in academia, industry, and other research institutes focusing on ...