WorldWideScience

Sample records for applications bla process

  1. Theoretical Studies on the First Hyperpolarizabilities of One-dimensional Donor-bridge-acceptor Chromophores and New Applications of BLA in Determining Molecular First Hyperpolarizabilities

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We present a quantum-chemical analysis of the relationship between the bond length alteration (BLA) and the static first hyperpolarizability of a series of one-dimensional (ID)chromophores with donor-bridge-acceptor (D-B-A) structures.The calculated results show that the parameter BLA can be considered as an indicator to evaluate the molecular first hyper-polarizability.Along the direction of molecular ground-state dipole moments, the evolutions of BLA can be classified into three categories: the first is a non-monotonic line, which represents most chromophores; the second is monotonic increasing; and the third, contrarily, is monotonic decreasing.On the whole, the first hyperpolarizabilities of these studied chromophores are the mortotonic functions of BLA along the direction of dipole moments.Therefore, the first hyper-polarizability of these 1D chromophores can be preliminarily evaluated in terms of the deve-lopment of BLA without a rigorous computation.In other words, one can roughly estimate the relative magnitude of the first hyperpolarizability according to the optimized geometry.

  2. Detection of blaIMP4 and blaNDM1 harboring Klebsiella pneumoniae isolates in a university hospital in Malaysia

    Directory of Open Access Journals (Sweden)

    Nurul Izzati Hamzan

    2015-03-01

    Full Text Available Background: Antibiotic resistance among Enterobacteriaceae posts a great challenge to the health care service. The emergence of carbapenem-resistant Klebsiella pneumoniae (CRKP is attracting significant attention due to its rapid and global dissemination. The infection is associated with significant morbidity and mortality, thus creating challenges for infection control and managing teams to curb the infection. In Southeast Asia, there have been limited reports and subsequent research regarding CRKP infections. Thus, the study was conducted to characterize CRKP that has been isolated in our setting. Methods: A total of 321 K. pneumoniae were included in the study. Each isolate went through an identification process using an automated identification system. Phenotypic characterization was determined using disk diffusion, modified Hodge test, Epsilometer test, and inhibitor combined disk test. Further detection of carbapenemase genes was carried out using polymerase chain reaction and confirmed by gene sequence analysis. Results: All together, 13 isolates (4.05% were CRKP and the majority of them were resistant to tested antibiotics except colistin and tigercycline. Among seven different carbapenemase genes studied (bla KPC, bla IMP, bla SME, bla NDM, bla IMI, bla VIM, and bla OXA, only two, bla IMP4 (1.87% and bla NDM1 (2.18%, were detected in our setting. Conclusion: Evidence suggests that the prevalence of CRKP in our setting is low, and knowledge of Carbapenem-resistant Enterobacteriaceae and CRKP has improved and become available among clinicians.

  3. Relation between blaTEM, blaSHV and blaCTX-M genes and acute urinary tract infections

    Institute of Scientific and Technical Information of China (English)

    Sima Sadat Seyedjavadi; Mehdi Goudarzi; Fattaneh Sabzehali

    2016-01-01

    Objective: To survey the frequency of blaTEM, blaSHV and blaCTX-M genotypes in extended-spectrum b-lactamase (ESBL)-producing Escherichia coli (E. coli) isolated from hospitalized patients with urinary tract infection and the determination of their antibiotic resistance patterns. Methods: During 11-month study, 100 ESBL-producing E. coli were collected from 330 patients who met the definition of urinary tract infection. The phenotypic identification of ESBL was confirmed by double disk synergy test and combined disk diffusion test. In vitro, susceptibility to ESBL isolates than 14 antimicrobial agents was performed by Kirby-Bauer disk diffusion method. The frequency of blaTEM, blaSHV and blaCTX-M ESBL-producing E. coli was assessed by PCR method. Results: The frequency of ESBL-producing E. coli was 40.8%. In vitro, susceptibility to ESBL-producing E. coli showed that the majority of isolates were highly susceptible to amikacin (74%) and imipenem (91%). The rates of resistance to other antibiotics varied from 33% to 96%. Through 100 tested isolates, the prevalence of blaTEM, blaSHV and blaCTX-M genes was determined to be 67%, 45% and 74% respectively. In comparison with other bla genes, the frequency of blaCTX-M was strikingly high. Conclusions: Due to the increase of E. coli with multiple ESBL genes, continuous sur-veillance in order to use appropriate antibiotics and the control of infections is necessary.

  4. Rapid discrimination of blaIMP-1, blaIMP-6, and blaIMP-34 using a multiplex PCR.

    Science.gov (United States)

    Kayama, Shizuo; Ohge, Hiroki; Sugai, Motoyuki

    2017-04-01

    Stealth-type carbapenem-resistant Enterobacteriaceae that are resistant to almost all β-lactams except imipenem is emerging in Japan. This resistance is mediated by specific variants of the metallo-β-lactamases (blaIMP-6 or blaIMP-34) that differs by one amino acid from the common variant blaIMP-1. We developed an amplification refractory mutation system (ARMS) PCR assay enabling rapid, sequence independent, identification of these variants.

  5. Real-time PCR assays for the detection and quantification of carbapenemase genes (bla KPC, bla NDM, and bla OXA-48) in environmental samples.

    Science.gov (United States)

    Subirats, Jèssica; Royo, Elena; Balcázar, José Luis; Borrego, Carles M

    2017-01-13

    In this study, we have developed real-time PCR assays using SYBR Green chemistry to detect all known alleles of bla KPC, bla NDM, and bla OXA-48-like carbapenemase genes in water, sediment, and biofilm samples collected from hospital and wastewater treatment plant (WWTP) effluents and rivers receiving chronic WWTP discharges. The amplification of bla KPC, bla NDM, and bla OXA-48 DNA was linear over 7 log dilutions (R (2) between 0.995 and 0.997) and showing efficiencies ranging from 92.6% to 100.3%. The analytical sensitivity indicated that the reaction for bla KPC, bla NDM, and bla OXA-48-like genes was able to detect 35, 16, and 19 copy numbers per assay, respectively. The three carbapenemase genes were detected in hospital effluents, whereas only the bla KPC and bla NDM genes were detected in biofilm and sediment samples collected from wastewater-impacted rivers. The detection of bla KPC, bla NDM, and bla OXA-48-like genes in different matrices suggests that carbapenem-resistant bacteria occur in both planktonic and benthic habitats thus expanding the range of resistance reservoirs for last-resort antibiotics. We believe that these real-time PCR assays would be a powerful tool for the rapid detection and quantification of bla KPC, bla NDM, and bla OXA-48-like genes in complex environmental samples.

  6. 多重PCR检测食源金黄色葡萄球菌nuc、blaZ和mecA基因方法的建立与应用%Multiplex PCR for detection of nuc, blaZ and mecA genes in food-borne Staphylococcus aureus and its application

    Institute of Scientific and Technical Information of China (English)

    刘书亮; 刘冬香; 贾仁勇; 韩新锋

    2010-01-01

    目的 建立快速检测食源金黄色葡萄球菌(Sa)耐热核酸酶基因(nuc)、β-内酰胺酶基因(blaZ)和甲氧西林耐药基因(mecA)的多重PCR方法.方法 根据GenBank Sa的nuc、blaZ和mecA基因序列,设计3对特异性引物,建立鉴定Sa及分析Sa耐β-内酰胺类抗生素三重PCR方法,并对79株食源Sa进行基因检测与表型比较.结果 显示供试Sa中检出nuc、blaZ基因阳性率分别为97.47%、73.42%,mecA基因检出为阴性;nuc基因检出与其表型符合率达97.47%;而blaZ扩增结果与β-内酰胺酶试验、青霉素类敏感试验同时符合率为49.37%,前者与后两者符合率分别为60.76%和75.95%;mecA与耐甲氧西林表型符合率为100%;此次79株食源Sa中无耐甲氧西林Sa.结论 该方法简便、快捷、准确,为食源Sa鉴定和耐药性分子分析提供了参考依据.

  7. Multiplex PCR amplification assay for the detection of blaSHV, blaTEM and blaCTX-M genes in Enterobacteriaceae.

    Science.gov (United States)

    Monstein, H-J; Ostholm-Balkhed, A; Nilsson, M V; Nilsson, M; Dornbusch, K; Nilsson, L E

    2007-12-01

    Extended-spectrum beta-lactamases (ESBLs) are often mediated by (bla-)SHV, (bla)TEM and (bla)CTX-M genes in Enterobacteriaceae and other Gram-negative bacteria. Numerous molecular typing methods, including PCR-based assays, have been developed for their identification. To reduce the number of PCR amplifications needed we have developed a multiplex PCR assay which detects and discriminates between (bla-)SHV, (bla)TEM and (bla)CTX-M PCR amplicons of 747, 445 and 593 bp, respectively. This multiplex PCR assay allowed the identification of (bla-)SHV, (bla)TEM and (bla)CTX-M genes in a series of clinical isolates of Enterobacteriaceae with previously characterised ESBL phenotype. The presence of (bla)SHV, (bla)TEM and (bla)CTX-M genes was confirmed by partial DNA sequence analysis. Apparently, the universal well-established CTX-M primer pair used here to reveal plasmid-encoded (bla)CTX-M genes would also amplify the chromosomally located K-1 enzyme gene in all Klebsiella oxytoca strains included in the study.

  8. Detection of P. aeruginosa harboring bla CTX-M-2, bla GES-1 and bla GES-5, bla IMP-1 and bla SPM-1 causing infections in Brazilian tertiary-care hospital

    Directory of Open Access Journals (Sweden)

    Polotto Milena

    2012-08-01

    Full Text Available Abstract Background Nosocomial infections caused by Pseudomonas aeruginosa presenting resistance to beta-lactam drugs are one of the most challenging targets for antimicrobial therapy, leading to substantial increase in mortality rates in hospitals worldwide. In this context, P. aeruginosa harboring acquired mechanisms of resistance, such as production of metallo-beta-lactamase (MBLs and extended-spectrum beta-lactamases (ESBLs have the highest clinical impact. Hence, this study was designed to investigate the presence of genes codifying for MBLs and ESBLs among carbapenem resistant P. aeruginosa isolated in a Brazilian 720-bed teaching tertiary care hospital. Methods Fifty-six carbapenem-resistant P. aeruginosa strains were evaluated for the presence of MBL and ESBL genes. Strains presenting MBL and/or ESBL genes were submitted to pulsed-field gel electrophoresis for genetic similarity evaluation. Results Despite the carbapenem resistance, genes for MBLs (blaSPM-1 or blaIMP-1 were detected in only 26.7% of isolates. Genes encoding ESBLs were detected in 23.2% of isolates. The blaCTX-M-2 was the most prevalent ESBL gene (19.6%, followed by blaGES-1 and blaGES-5 detected in one isolate each. In all isolates presenting MBL phenotype by double-disc synergy test (DDST, the blaSPM-1 or blaIMP-1 genes were detected. In addition, blaIMP-1 was also detected in three isolates which did not display any MBL phenotype. These isolates also presented the blaCTX-M-2 gene. The co-existence of blaCTX-M-2 with blaIMP-1 is presently reported for the first time, as like as co-existence of blaGES-1 with blaIMP-1. Conclusions In this study MBLs production was not the major mechanism of resistance to carbapenems, suggesting the occurrence of multidrug efflux pumps, reduction in porin channels and production of other beta-lactamases. The detection of blaCTX-M-2,blaGES-1 and blaGES-5 reflects the recent emergence of ESBLs among antimicrobial resistant P. aeruginosa and

  9. The Frequency of blaVIM, blaIMP, blaKPC and blaNDM Carbapenemase Genes in Clinical Isolates of Klebsiella Pneumoniae in Kermanshah Medical Centers

    Directory of Open Access Journals (Sweden)

    A Zare

    2015-11-01

    Full Text Available Background: Carbapenemase genes have been spread among strains of Klebsiella pneumoniae that make them resistant to carbapenems. Hence, the present study aimed to study the prevalence of carbapenmase genes within K. pneumoniae isolates in Kermanshah medical centers. Methods: Sixty isolates of K. pneumoniae were collected and identified using API kit. Then, antibiotic susceptibility of isolates was determined using a disk diffusion method. The carbapenems-resistant isolates were screened for carbapenemases production using the Modified Hodge Test (MHT. The carbapenemase genes of blaVIM, blaIMP, KPC and blaNDM were detected by PCR test . Results: Out of 60 isolates, 4 isolates were resistant to carbapenem antibiotics, but only one isolate was demonstrated to be positive for carbapenemases by MHT phenotypic testing. The gene of blaVIM was detected in three isolates by PCR, though other genes were not found in the isolates. Within the isolates, 6.67% and 100% were resistant to carbapenem and ampicillin, respectively. Conclusion: The study findings revealed that dissemination rate of carbapenemase genes was not reported to be high among isolates of K. pneumoniae in Kermanshah. Only blaVIM gene was probably more frequent than other tested genes. Since most isolates examined in this study were susceptible to carbapenem antibiotics, these antibiotics are still regarded as effective drugs against infections caused by K. pneumoniae.

  10. Identification of blaOXA-51, blaOXA-58, blaDIM-1 and blaVIM carbapenemase genes in hospital enterobacteriaceae isolates from Sierra Leone

    Science.gov (United States)

    We describe the results of a molecular epidemiological survey of 15 carbapenemase-encoding genes from a recent collection of clinical isolates. The most salient findings revealed that (i) 60% of the isolates harbored multiple carbapenemase genes, (ii) the blaDIM-1 gene that has only been reported in...

  11. Co-occurrence of blaNDM-1 with blaOXA-23 or blaOXA-58 in clinical multidrug-resistant Acinetobacter baumannii isolates in Algeria.

    Science.gov (United States)

    Ramoul, Abir; Loucif, Lotfi; Bakour, Sofiane; Amiri, Sabrina; Dekhil, Mazouz; Rolain, Jean-Marc

    2016-09-01

    The aim of this study was to characterise the mechanisms of carbapenem resistance in Acinetobacter baumannii strains isolated in an Algerian hospital. A total of 43 imipenem-resistant A. baumannii clinical isolates collected between 2010 and 2013 were identified using API 20NE and were confirmed by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF/MS). Antibiotic susceptibility testing was performed by the disk diffusion and Etest methods. Carbapenemase activity was detected using microbiological tests and PCR. Genetic transfer of the blaNDM-1 gene was performed by conjugation using sodium azide-resistant Escherichia coli J53 as recipient strain. Clonal relationships were studied by multilocus sequence typing (MLST) using partial sequences of the csuE and blaOXA-51 genes. All 43 A. baumannii isolates were resistant to imipenem with high minimum inhibitory concentrations (MICs) (>32μg/mL). The strains harboured blaOXA-23, blaNDM-1, blaOXA-58 and/or blaOXA-24 genes. Co-existence of blaNDM-1 and blaOXA-23 or blaOXA-58 was detected in two isolates and one isolate, respectively. NDM-1 plasmid transfer to E. coli J53 was successful only for one of the three strains harbouring both blaNDM-1 and blaOXA-23 or blaOXA-58. The phylogenetic tree obtained from concatenation of the partial sequences of csuE and blaOXA-51 showed that there was no genetic relationship between the isolates and the blaNDM-1 resistance gene. Here we report for the first time the co-occurrence of blaNDM-1 along with blaOXA-23 or blaOXA-58 in recent clinical isolates of A. baumannii from Northeast Algeria. These findings re-emphasise the dissemination and rapid spread of blaNDM-1 carbapenemase genes in multidrug-resistant clinical A. baumannii isolates in Algeria.

  12. Aeromonas spp. simultaneously harbouring bla(CTX-M-15), bla(SHV-12), bla(PER-1) and bla(FOX-2), in wild-growing Mediterranean mussel (Mytilus galloprovincialis) from Adriatic Sea, Croatia.

    Science.gov (United States)

    Maravić, Ana; Skočibušić, Mirjana; Samanić, Ivica; Fredotović, Zeljana; Cvjetan, Svjetlana; Jutronić, Marinka; Puizina, Jasna

    2013-09-02

    Aeromonas species are becoming renowned as emerging pathogens by increasingly giving rise to a wide spectrum of food and waterborne infections in humans. Another worrisome feature of aeromonads is the growing frequency of antibiotic resistance as a consequence of their prominent diversity in terms of resistance determinants. This study aimed at determining the antimicrobial resistance pattern, prevalence and characterization of acquired β-lactamases, including extended-spectrum-β-lactamases (ESBLs) and AmpC cephalosporinases, as well as the presence of class 1 and 2 integrons, in Aeromonas isolates from wild-growing Mediterranean mussel (Mytilus galloprovincialis) of the eastern coast of Adriatic Sea, Croatia. Isolates were tested for susceptibility to 16 antibiotics and β-lactam/β-lactamase inhibitor combinations. Cephalosporin-resistant isolates were further screened by PCR for genes encoding AmpC (bla(FOX), bla(CMY), bla(MOX), bla(LAT), bla(BIL), bla(DHA), bla(ACC), bla(MIR), bla(ACT)), ESBLs (bla(TEM), bla(SHV), bla(CTX-M), bla(PER), bla(VEB), bla(GES/IBC), bla(OXA)) and integrases (intI1, intI2, intI3). Location of bla genes was characterized by plasmid DNA fingerprinting and Southern blot hybridization. Plasmids carrying ESBL genes were investigated for transferability by conjugation and PCR-based replicon typed. Out of 147 Aeromonas isolates recovered, 30 (20%) demonstrated multiple resistance profile, with co-resistance most frequently detected against penicillins, piperacillin/sulbactam and tetracycline. ESBL-encoding genes were detected in 21 (13 Aeromonas caviae and 8 Aeromonas hydrophila) isolates, with bla(CTX-M-15) gene identified in 19 and bla(SHV-12) in 12 isolates. Among them, 10 isolates simultaneously harboured bla(CTX-M-15) and bla(SHV-12), while 3 isolates additionally carried an AmpC β-lactamase bla(FOX-2) gene. bla(PER-1) gene was identified in a single isolate also harbouring the bla(CTX-M-15) gene. While bla(SHV-12) was chromosomally

  13. Characterization of a novel Klebsiella pneumoniae sequence type 476 carrying both bla KPC-2 and bla IMP-4.

    Science.gov (United States)

    Wang, Y; Cao, W; Zhu, X; Chen, Z; Li, L; Zhang, B; Wang, B; Tian, L; Wang, F; Liu, C; Sun, Z

    2012-08-01

    Carbapenemase-producing Klebsiella pneumoniae has recently spread rapidly throughout China. In this study, we characterized a carbapenem-resistant K. pneumoniae isolate that produced both KPC-2 and IMP-4 type carbapenemases. A clinical isolate of K. pneumoniae, resistant to both meropenem and imipenem, was recovered from a urine sample. Antibiotic susceptibility was determined using the broth microdilution method and Etest (bioMérieux, France). Pulsed-field gel electrophoresis and multilocus sequence typing (MLST) were used for gene type analysis. bla (KPC) and the encoding genes of ESBLs and plasmid-mediated AmpC enzymes were polymerase chain reaction (PCR) amplified and sequenced. Plasmids were analyzed by transformation, enzyme restriction and Southern blot. PCR analysis revealed that the isolate was simultaneously carrying bla (KPC-2), bla (IMP-4), bla (TEM-1), and bla (OKP-B) genes. MLST assigned the isolate to a novel sequence type, ST476. bla (KPC-2)-harbouring plasmids of the isolate and comparative strains had similar EcoRI and HindIII restriction maps, while IMP-4-harbouring plasmids had variable HindIII restriction maps. Coexistence of bla (KPC-2) and bla (IMP-4) was probably due to bla (IMP-4)-harbouring plasmid transmission into KPC-2-producing K. pneumoniae (ST476). The concomitant presence of these genes is alarming and poses both therapeutic and infection control problems.

  14. Investigation of signal transduction routes within the sensor/transducer protein BlaR1 of Staphylococcus aureus.

    Science.gov (United States)

    Staude, Michael W; Frederick, Thomas E; Natarajan, Sivanandam V; Wilson, Brian D; Tanner, Carol E; Ruggiero, Steven T; Mobashery, Shahriar; Peng, Jeffrey W

    2015-03-03

    The transmembrane antibiotic sensor/signal transducer protein BlaR1 is part of a cohort of proteins that confer β-lactam antibiotic resistance in methicillin-resistant Staphylococcus aureus (MRSA) [Fisher, J. F., Meroueh, S. O., and Mobashery, S. (2005) Chem. Rev. 105, 395-424; Llarrull, L. I., Fisher, J. F., and Mobashery, S. (2009) Antimicrob. Agents Chemother. 53, 4051-4063; Llarrull, L. I., Toth, M., Champion, M. M., and Mobashery, S. (2011) J. Biol. Chem. 286, 38148-38158]. Specifically, BlaR1 regulates the inducible expression of β-lactamases that hydrolytically destroy β-lactam antibiotics. The resistance phenotype starts with β-lactam antibiotic acylation of the BlaR1 extracellular domain (BlaRS). The acylation activates the cytoplasmic protease domain through an obscure signal transduction mechanism. Here, we compare protein dynamics of apo versus antibiotic-acylated BlaRS using nuclear magnetic resonance. Our analyses reveal inter-residue interactions that relay acylation-induced perturbations within the antibiotic-binding site to the transmembrane helix regions near the membrane surface. These are the first insights into the process of signal transduction by BlaR1.

  15. Detection of bla KPC-2 in Proteus mirabilis in Brazil

    Directory of Open Access Journals (Sweden)

    Adriane Borges Cabral

    2015-02-01

    Full Text Available INTRODUCTION : Infections caused by Klebsiella pneumoniae carbapenemase (KPC-producing isolates pose a major worldwide public health problem today. METHODS : A carbapenem-resistant Proteus mirabilis clinical isolate was investigated for plasmid profiles and the occurrence of β-lactamase genes. RESULTS : The isolate exhibited resistance to ertapenem and imipenem and was susceptible to meropenem, polymyxin, and tigecycline. Five plasmids were identified in this isolate. DNA sequencing analysis revealed the presence of bla KPC-2 and bla TEM-1 genes. An additional PCR using plasmid DNA confirmed that bla KPC-2 was present in one of these plasmids. Conclusions: We report the detection of bla KPC-2 in P. mirabilis in Brazil for the first time. This finding highlights the continuous transfer of bla KPC between bacterial genera, which presents a serious challenge to the prevention of infection by multidrug-resistant bacteria.

  16. Coexistence of blaNDM-1 、blaKPC-2 、blaDHA-1 、blaTEM-1 and blaOXA-1 genes in a clinical ST11 Klebsiella pneumoniae isolate in chi-na%首例同时携带 blaNDM-1、blaKPC-2、blaDHA-1、blaTEM-1和 blaOXA-1基因的 ST11肺炎克雷伯菌临床株

    Institute of Scientific and Technical Information of China (English)

    油丽萍; 陈爱文; 秦萍; 徐茶; 赵辉; 吴春梅; 朱元祺

    2015-01-01

    Objective To explore the molecular mechanism of the clinical carbapenem-resistant Klebsiella pneumon-iae isolates.Methods The strains identification and antibiotic susceptibilities were performed by VITEK-2 compact system.The genes of AmpC,ESBLs,MBL and KPCβ-lactamases were screened by specific PCR.And genotypes were confirmed by DNA sequencing.PFGE and multilocus sequence typing (MLST)were performed.Results 5 Klebsiella pneumoniae isolates were resistant to all antibiotics tested.Genotyping(PFGE)clustered 5 K .pneumoniae isolates into a single clonal type and MLST assigned them to sequence type 11.The blaKPC-2 ,baTEM-1 ,blaCTXG 9 and rmtB genes were present in four isolates.And Molecular testing verified the presence of blaNDM-1 ,blaKPC-2 ,blaDHA-1 ,blaTEM-1 and blaOXA-1 genes in a Klebsiella pneumoniae isolate.Conclusion To our knowledge,this is first report of coexistence of blaNDM-1 , blaKPC-2 ,blaDHA-1 ,blaTEM-1 and blaOXA-1 genes in a clinical Klebsiella pneumonia isolate.It may herald the emergence of a new pattern of drug resistance.Surveillance of metallo-β-lactamases in enterobacteriaceae is urgently needed to control and prevent the spread of these isolates.%目的:探讨产碳青霉烯酶肺炎克雷伯菌的耐药机制,为医院感染控制提供依据。方法法国 VITEK-2 Compact 对细菌进行鉴定和药敏试验;改良 Hodge 试验初筛肺炎克雷伯菌是否产碳青霉烯酶;多重 PCR 对菌株进行β-内酰胺类耐药基因和16S rRNA 甲基化酶基因的检测,测序确认基因型;多位点序列分型和脉冲场凝胶电泳实验进行细菌的同源性分析。结果5株肺炎克雷伯菌多位点序列分型是 ST11型,其中4株都同时携带有 blaKPC-2、blaTEM-1、blaCTXG 9和16S rRNA 甲基化酶 rmtB 基因,另外1株(HD03)肺炎克雷伯菌同时携带 blaNDM-1、blaKPC-2、blaDHA-1、blaTEM-1和 blaOXA-1基因。脉冲场凝胶电泳显示,除了 HD04菌株多一条带外,其余带型5株菌完

  17. Coastal Processes with Engineering Applications

    Science.gov (United States)

    Dean, Robert G.; Dalrymple, Robert A.

    2004-03-01

    The world's coastlines, dividing land from sea, are geological environments that are unique in their composition and the physical processes affecting them. At the dynamically active intersection of land and the oceans, humans have been building structures throughout history. Initially used for naval and commercial purposes, more recently recreation and tourism have increased activity in the coastal zone dramatically. Shoreline development is now causing a significant conflict with natural coastal processes. This text on coastal engineering will help the reader understand these coastal processes and develop strategies to cope effectively with shoreline erosion. The book is organized in four parts: (1) an overview of coastal engineering, using case studies to illustrate problems; (2) hydrodynamics of the coastal zone, reviewing storm surges, water waves, and low frequency motions within the nearshore and surf zone; (3) coastal responses including equilibrium beach profiles and sediment transport; (4) applications such as erosion mitigation, beach nourishment, coastal armoring, tidal inlets, and shoreline management.

  18. Imipenem-resistant Acinetobacter baumannii carrying the ISAba1-bla OXA-23, 51 and ISAba1-bla ADC-7 genes in Monteria, Colombia

    Directory of Open Access Journals (Sweden)

    Pedro Martínez

    2012-12-01

    Full Text Available The purpose of this study was to identify the genes coding for resistance to ceftazidime and imipenem and describe the molecular epidemiology of A. baumannii strains isolated from a clinical center in Colombia. Twenty isolates of imipenem-resistant A. baumannii from an equal number of patients with nosocomial infections were obtained. Primers were used to amplify genes bla IMP, bla VIM, bla OXA-23, bla OXA-24, bla OXA-58, bla OXA-51 and bla ADC-7. To detect insertion sequences ISAba1/bla OXA-23, ISAba1/bla OXA-51 and ISAba1/bla ADC-7, mapping by PCR using combinations of reverse primers ISAba1 and reverse primers of bla OXA-23, bla OXA-51 and bla ADC-7 were used. The amplification products were purified and cloned into PCR 2.1-TOPO vector and transformed into chemically competent Escherichia coli TOP10. These amplicons were then sequenced. PFGE was performed on DNA of A. baumannii isolates digested with ApaI. Results. The DNA profiles obtained included 9 clusters with, four 2-7 isolates per profile, and 5 single-isolate profiles. Of the 20 isolates resistant to imipenem, 15 carried bla OXA-23 gene, 4 contained ISAba1 upstream of bla OXA-51 gene, and 6 contained ISAba1 upstream of bla OXA-23 gene. Eighteen of these isolates carried the bla ADC-7 gene, with 9 of the isolates having ISAba1 located upstream of this gene. This is the first report of the ISAba1 /ADC-7 associated with OXAs genes in A. baumannii isolates from Colombia.

  19. Direct detection of mecA, blaSHV , blaCTX-M , blaTEM and blaOXA genes from positive blood culture bottles by multiplex-touchdown PCR assay.

    Science.gov (United States)

    Wang, M-Y; Geng, J-L; Chen, Y-J; Song, Y; Sun, M; Liu, H-Z; Hu, C-J

    2017-02-01

    Methicillin-resistant staphylococci (MRS) and ESBL(Extended-Spectrum β-Lactamase)-producing bacteria are the most important resistant pathogens in sepsis. In this study, a new multiplex-touchdown PCR method (MT-PCR) was developed to detect rapidly and simultaneously the presence of mecA, blaSHV , blaCTX-M , blaTEM and blaOXA genes from positive blood culture bottles. The technique showed a sensitivity of 10(3 ) CFU ml(-1) for mecA detection and of 10(2)  CFU ml(-1) for other genes, and 100% specificity in the detection of all genes. All genes were detected in the spiked blood culture bottles artificially contaminated with reference strains. Three methicillin-resistant S. aureus (MRSA), two methicillin-resistant S. epidermidis (MRSE) and 32 ESBL-producing bacteria, were isolated from the clinical blood culture specimens in 48 h by standard microbiological procedures. The corresponding genes were detected directly in the three MRSA, two MRSE and 29 ESBL-producing bacteria from the clinical blood culture specimens in 4 h by MT-PCR assay. None of the blaSHV , blaCTX-M , blaTEM and blaOXA genes were detected in three other bottles with ESBL-producing bacteria because of other ESBL genotypes in the pathogens. Likewise, all bottles proven negative by culture remained negative by PCR. The proposed method was rapid, sensitive and specific, and was able to directly detect the genes of MRS and ESBL-producing bacteria from the blood culture bottles.

  20. Detection of blaSHV, blaTEM and blaCTX-M antibiotic resistance genes in randomly selected bacterial pathogens from the Steve Biko Academic Hospital.

    Science.gov (United States)

    Ehlers, Marthie M; Veldsman, Chrisna; Makgotlho, Eddy P; Dove, Michael G; Hoosen, Anwar A; Kock, Marleen M

    2009-08-01

    Extended-spectrum beta-lactamases (ESBLs) are considered to be one of the most important antibiotic resistance mechanisms. This study reported the ESBL-producing genes in 53 randomly selected clinical bacterial isolates from the Steve Biko Academic Hospital. The presence of the bla(SHV), bla(TEM) and bla(CTX-M) genes was determined, and the overall prevalence of these genes detected in this study was 87% (46/53) in comparison with the literature; these results were higher when compared with 33% for Escherichia coli in Europe and 0.8% in Denmark for similar pathogens. These research findings indicated that it is crucial to routinely monitor the prevalence of these resistance genes.

  1. Detection of extended-spectrum β-lactamases (blaCTX-M-1 and blaTEM in Escherichia coli, Salmonella spp., and Klebsiella pneumoniae isolated from poultry in North Eastern India

    Directory of Open Access Journals (Sweden)

    H. Lalzampuia

    2014-11-01

    Full Text Available Aim: The present study was conducted to record the association of extended spectrum β-lactamases (ESBLs producing enteric bacteria with diarrhea of poultry birds in Mizoram, India. Materials and Methods: Fecal samples were collected from poultry birds with the history of diarrhea from different parts of Mizoram. Samples were processed for isolation and identification of Escherichia coli, Salmonella, and Klebsiella pneumoniae. All the isolates were subjected to antibiotic sensitivity assays. Phenotypically, ESBLs production ability was determined by double discs synergy test (DDST method. ESBLs producing isolates were subjected to polymerase chain reaction (PCR for detection of ESBLs genes. Plasmids were cured by acridine orange. Transfer of resistance from donor to recipient strains was done by in vitro horizontal method. Results: A total of 134 enteric bacteria was isolated, of which 102 (76.12%, 21 (15.67% and 11 (8.21% were E. coli, Salmonella spp. and K. pneumoniae, respectively. By DDST 7 (5.22% isolates (6 E. coli and 1 K. pneumoniae were ESBLs producer. PCR analysis confirmed 5 (3.73% (4 E. coli and 1 K. pneumoniae isolates harboured blaCTX-M-1 gene and/or blaTEM gene. All the isolates were carrying plasmids ranging between 0.9 kb and ~30 kb. Of the 4 isolates positive for blaCTX-M-1 and/or blaTEM, 2 (1.84% were confirmed for blaCTX-M-1 gene in their plasmid. No blaTEM gene was detected from plasmid. The resistance plasmid could not be transferred to the recipient by in vitro horizontal gene transfer method. Conclusion: ESBLs producing enteric bacteria are circulating in poultry in North Eastern Region of India. As poultry is one of the most common food animals in this region, these organisms may enter in human population through them.

  2. Detection of blaSPM-1, blaKPC, blaTEM and blaCTX-M genes in isolates of Pseudomonas aeruginosa, Acinetobacter spp. and Klebsiella spp. from cancer patients with healthcare-associated infections.

    Science.gov (United States)

    Jácome, Paula Regina Luna de Araújo; Alves, Lílian Rodrigues; Jácome-Júnior, Agenor Tavares; Silva, Maria Jesuíta Bezerra da; Lima, Jailton Lobo da Costa; Araújo, Paulo Sérgio Ramos; Lopes, Ana Catarina S; Maciel, Maria Amélia Vieira

    2016-07-01

    Pseudomonas aeruginosa, Acinetobacter spp. and Klebsiella spp. are three of the pathogens most frequently involved in infections of cancer patients, and the production of β -lactamases is a major mechanism of resistance due to its wide diversity of existing enzymes. Therefore, the aim of the present study was to investigate the microbiological profile and data related to patients and infections, and to search for β -lactamase genes in bacterial isolates from hospitalized cancer patients in a hospital in Recife, Pernambuco, Brazil. A total of 169 isolates were recovered between 2012 and 2014, of which 58 were P. aeruginosa, 36 were Acinetobacter spp. and 75 were Klebsiella spp. A high percentage of carbapenem resistance was observed in P. aeruginosa and Acinetobacter spp. Among the carbapenem-resistant bacteria, the blaSPM-1 gene was detected in P. aeruginosa (35.5 %) and Acinetobacter spp. (3.8 %), while blaKPC was detected in P. aeruginosa (25.8 %) only. Among the third- and fourth-generation cephalosporin-resistant strains, in Klebsiella spp. we detected the genes blaTEM (30.6 %), blaCTX-M (58.3 %) and blaKPC (5.6 %), and in Acinetobacter spp. only blaTEM (25.9 %). This the first report of an Acinetobacter baumannii blaSPM-1 gene carrier that has been isolated in Brazil. The most frequent cancer types were bowel tumour [14.8 %; 95 % confidence interval (CI95 %) 9.8-21.1 %], breast cancer (13.6 %; CI95 % 8.8-19.7 %) and prostate cancer (11.2%; CI95 % 6.9-17.0 %). These results therefore provide knowledge of susceptibility profile and resistance mechanisms and thus can contribute to the strategic formulation of hospital infection control plans and the rational use of antimicrobials, reducing mortality from infection levels in cancer patients.

  3. Microsystem for signal processing applications

    Science.gov (United States)

    Frankenstein, B.; Froehlich, K.-J.; Hentschel, D.; Reppe, G.

    2005-05-01

    Acoustic monitoring of technological processes requires methods that eliminate noise as much as possible. Sensor-near signal evaluation can contribute substantially. Frequently, a further necessity exists to integrate the measuring technique in the monitored structure. The solution described contains components for analog preprocessing of acoustic signals, their digitization, algorithms for data reduction, and digital communication. The core component is a digital signal processor (DSP). Digital signal processors perform the algorithms necessary for filtering, down sampling, FFT computation and correlation of spectral components particularly effective. A compact, sensor-near signal processing structure was realized. It meets the Match-X standard, which as specified by the German Association for Mechanical and Plant Engineering (VDMA) for development of micro-technical modules, which can be combined to applicaiton specific systems. The solution is based on AL2O3 ceramic components including different signal processing modules as ADC, as well as memory and power supply. An arbitrary waveform generator has been developed and combined with a power amplifier for piezoelectric transducers in a special module. A further module interfaces to these transducers. It contains a multi-channel preamplifier, some high-pass filters for analog signal processing and an ADC-driver. A Bluetooth communication chip for wireless data transmission and a DiscOnChip module are under construction. As a first application, the combustion behavior of safety-relevant contacts is monitored. A special waveform up to 5MHz is produced and sent to the monitored object. The resulting signal form is evaluated with special algorithms, which extract significant parameters of the signal, and transmitted via CAN-bus.

  4. First Report of bla(IMP-8) in Raoultella planticola.

    Science.gov (United States)

    Tseng, Sung-Pin; Wang, Jann-Tay; Liang, Chih-Yuan; Lee, Pei-Shan; Chen, Yee-Chun; Lu, Po-Liang

    2014-01-01

    Two carbapenem-resistant Raoultella planticola clinical isolates were isolated from patients with pneumonia and Port-A catheter-related bacteremia, respectively, in Taiwan. These isolates remained susceptible to fluoroquinolone, aminoglycoside, and colistin. Though the two isolates had the same antibiogram, plasmidic carbapenemase blaIMP-8, class 1 integron cassette (dfrA12-orfF-aadA2), and qnrB2, they had different pulsed-field gel electrophoresis patterns, plasmid sizes, and outer membrane protein loss profiles. To our knowledge, this is the first report of blaIMP-8 found in R. planticola. Interestingly, blaIMP-8 is the most common carbapenemase found in Klebsiella pneumoniae in Taiwan. In the literature, carbapenemase genes in R. planticola in each country were also found in carbapenem-resistant Enterobacteriaceae in the same country.

  5. Coexistence of blaOXA-48 and Truncated blaNDM-1 on Different Plasmids in a Klebsiella pneumoniae Isolate in China

    Science.gov (United States)

    Xie, Lianyan; Dou, Yi; Zhou, Kaixin; Chen, Yue; Han, Lizhong; Guo, Xiaokui; Sun, Jingyong

    2017-01-01

    Objectives: To describe the genetic environment, transferability, and antibiotic susceptibility of one clinical Klebsiella pneumoniae isolate harboring both blaOXA-48 and blaNDM-1 on different plasmids from a Chinese hospital. Methods: The isolate was subjected to antimicrobial susceptibility testing and multilocus sequence typing using Etest and PCR. The plasmids harboring blaOXA-48 and blaNDM-1 were analyzed through conjugation experiments, S1-nuclease pulsed-field gel electrophoresis, and hybridization with specific probes. Plasmid DNA was sequenced using Pacbio RS II and annotated using RAST. Results: K. pneumoniae RJ119, carrying both blaOXA-48 and blaNDM-1, was resistant to almost all carbapenems, cephalosporins, fluoroquinolone, and aminoglycosides and belonged to ST307. blaOXA-48 was located on a 61,748-bp IncL/M conjugative plasmid, which displayed overall nucleotide identity (99%) to pKPN-E1-Nr.7. blaNDM-1 was located on a 335,317-bp conjugative plasmid, which was a fusion of a blaNDM-1-harboring InA/C plasmid pNDM-US (140,825 bp, 99% identity) and an IncFIB plasmid pKPN-c22 (178,563 bp, 99% identity). The transconjugant RJ119-1 harboring blaNDM-1 was susceptible to carbapenem, and there was an insertion of IS10 into the blaNDM-1 gene. Conclusion: This is the first report of the coexistence of blaOXA-48 and blaNDM-1 in one K. pneumoniae clinical isolate in China. OXA-48 in RJ119 contributed to the majority to its high resistance to carbapenems, whereas NDM-1 remained unexpressed, most likely due to the insertion of IS10. Our results provide new insight for the relationship between genetic diagnosis and clinical treatment. They also indicate that increased surveillance of blaOXA-48 is urgently needed in China. PMID:28210248

  6. 49 CFR 80.7 - Application process.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Application process. 80.7 Section 80.7 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.7 Application process. (a) Public and private applicants for credit assistance under this...

  7. 49 CFR 262.11 - Application process.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Application process. 262.11 Section 262.11 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... IMPROVEMENT PROJECTS § 262.11 Application process. (a) All grant applications for opportunities funded...

  8. 44 CFR 79.5 - Application process.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Application process. 79.5 Section 79.5 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF... § 79.5 Application process. (a) Applicant or grantee. (1) States will be notified of the...

  9. Application of wavelets in speech processing

    CERN Document Server

    Farouk, Mohamed Hesham

    2014-01-01

    This book provides a survey on wide-spread of employing wavelets analysis  in different applications of speech processing. The author examines development and research in different application of speech processing. The book also summarizes the state of the art research on wavelet in speech processing.

  10. Composite materials processing, applications, characterizations

    CERN Document Server

    2017-01-01

    Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

  11. GPU applications for data processing

    Energy Technology Data Exchange (ETDEWEB)

    Vladymyrov, Mykhailo, E-mail: mykhailo.vladymyrov@cern.ch [LPI - Lebedev Physical Institute of the Russian Academy of Sciences, RUS-119991 Moscow (Russian Federation); Aleksandrov, Andrey [LPI - Lebedev Physical Institute of the Russian Academy of Sciences, RUS-119991 Moscow (Russian Federation); INFN sezione di Napoli, I-80125 Napoli (Italy); Tioukov, Valeri [INFN sezione di Napoli, I-80125 Napoli (Italy)

    2015-12-31

    Modern experiments that use nuclear photoemulsion imply fast and efficient data acquisition from the emulsion can be performed. The new approaches in developing scanning systems require real-time processing of large amount of data. Methods that use Graphical Processing Unit (GPU) computing power for emulsion data processing are presented here. It is shown how the GPU-accelerated emulsion processing helped us to rise the scanning speed by factor of nine.

  12. Process Neural Networks Theory and Applications

    CERN Document Server

    He, Xingui

    2010-01-01

    "Process Neural Networks - Theory and Applications" proposes the concept and model of a process neural network for the first time, showing how it expands the mapping relationship between the input and output of traditional neural networks, and enhancing the expression capability for practical problems, with broad applicability to solving problems relating to process in practice. Some theoretical problems such as continuity, functional approximation capability, and computing capability, are strictly proved. The application methods, network construction principles, and optimization alg

  13. Two Multiplex Real-Time PCR Assays to Detect and Differentiate Acinetobacter baumannii and Non- baumannii Acinetobacter spp. Carrying blaNDM, blaOXA-23-Like, blaOXA-40-Like, blaOXA-51-Like, and blaOXA-58-Like Genes.

    Science.gov (United States)

    Yang, Qiu; Rui, Yongyu

    2016-01-01

    Nosocomial infections caused by Acinetobacter spp. resistant to carbapenems are increasingly reported worldwide. Carbapenem-resistant Acinetobacter (CRA) is becoming a serious concern with increasing patient morbidity, mortality, and lengths of hospital stay. Therefore, the rapid detection of CRA is essential for epidemiological surveillance. Polymerase chain reaction (PCR) has been extensively used for the rapid identification of most pathogens. In this study, we have developed two multiplex real-time PCR assays to detect and differentiate A. baumannii and non-A. baumannii Acinetobacter spp, and common carbapenemase genes, including blaNDM, blaOXA-23-like, blaOXA-40-like, blaOXA-51-like, and blaOXA-58-like. We demonstrate the potential utility of these assays for the direct detection of blaNDM-, blaOXA-23-like-, blaOXA-40-like-, blaOXA-51-like-, and blaOXA-58-like-positive CRA in clinical specimens. Primers were specifically designed, and two multiplex real-time PCR assays were developed: multiplex real-time PCR assay1 for the detection of Acinetobacter baumannii 16S-23S rRNA internal transcribed spacer sequence, the Acinetobacter recA gene, and class-B-metalloenzyme-encoding gene blaNDM; and multiplex real-time PCR assay2 to detect class-D-oxacillinase-encoding genes (blaOXA-23-like, blaOXA-40-like, blaOXA-51-like,and blaOXA-58-like). The assays were performed on an ABI Prism 7500 FAST Real-Time PCR System. CRA isolates were used to compare the assays with conventional PCR and sequencing. Known amounts of CRA cells were added to sputum and fecal specimens and used to test the multiplex real-time PCR assays. The results for target and nontarget amplification showed that the multiplex real-time PCR assays were specific, the limit of detection for each target was 10 copies per 20 μL reaction volume, the assays were linear over six log dilutions of the target genes (r2 > 0.99), and the Ct values of the coefficients of variation for intra- and interassay

  14. Thermoforming - Its Processes and Applications,

    Science.gov (United States)

    1960-09-01

    Thermoforming was one of the earliest methods of fabricating thermoplastic materials. With the advent of injection molding, most people felt... thermoforming offered little, if any, future or growth potential. Thermoforming was generally regarded as a relatively inexpensive way of making a small...thermoplastic fabrication field. The applications in which thermoforming of plastic sheet is used are many and varied Some of the applications are

  15. 8 CFR 240.63 - Application process.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Application process. 240.63 Section 240.63 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS PROCEEDINGS TO DETERMINE... Cancellation of Removal Under Section 203 of Pub. L. 105-100 § 240.63 Application process. (a) Form and...

  16. Containerless processing: Techniques and applications

    Energy Technology Data Exchange (ETDEWEB)

    Hofmeister, W.H. (ed.) (Vanderbilt Univ., Nashville, TN (United States)); Schiffman, R. (ed.) (R.S. Research, Inc., Riverwoods, IL (United States))

    1993-01-01

    Containerless processing is an interdisciplinary science, attracting the collaboration of material scientist, fluid dynamicists, physicists and technologists in the study of the properties and behavior of free liquids. Separate abstracts were prepared for 19 papers in this conference.

  17. Electrospinning Materials, Processing, and Applications

    CERN Document Server

    Wendorff, Joachim H; Greiner, Andreas

    2012-01-01

    Bringing together the world's experts in the field, this book summarizes the state-of-the art in electrospinning with detailed coverage of the various techniques, material systems, and their resulting fiber structures and properties, theoretical aspects, and applications. Throughout the book, the current status of knowledge is introduced with a critical view on accomplishments and novel persepectives. An experimental section gives hands-on guidance to beginners and experts alike.

  18. Process-driven applications with BPMN

    CERN Document Server

    Stiehl, Volker

    2014-01-01

    How can we optimize differentiating business processes and exploit their full potential? Here Volker Stiehl provides answers, utilizing the various options that the BPMN (Business Process Model and Notation) standard offers for planning, implementing and monitoring processes. The book presents an approach for implementing an architecture for applications that strives to find a balance between development and maintenance costs, sustainability, scalability and fault tolerance; that meets flexibility requirements without becoming inordinately complex itself; and that keeps the end application a

  19. Computer image processing: Geologic applications

    Science.gov (United States)

    Abrams, M. J.

    1978-01-01

    Computer image processing of digital data was performed to support several geological studies. The specific goals were to: (1) relate the mineral content to the spectral reflectance of certain geologic materials, (2) determine the influence of environmental factors, such as atmosphere and vegetation, and (3) improve image processing techniques. For detection of spectral differences related to mineralogy, the technique of band ratioing was found to be the most useful. The influence of atmospheric scattering and methods to correct for the scattering were also studied. Two techniques were used to correct for atmospheric effects: (1) dark object subtraction, (2) normalization of use of ground spectral measurements. Of the two, the first technique proved to be the most successful for removing the effects of atmospheric scattering. A digital mosaic was produced from two side-lapping LANDSAT frames. The advantages were that the same enhancement algorithm can be applied to both frames, and there is no seam where the two images are joined.

  20. Identifying ionic interactions within a membrane using BLaTM, a genetic tool to measure homo- and heterotypic transmembrane helix-helix interactions

    Science.gov (United States)

    Schanzenbach, Christoph; Schmidt, Fabian C.; Breckner, Patrick; Teese, Mark G.; Langosch, Dieter

    2017-01-01

    The assembly of integral membrane protein complexes is frequently supported by transmembrane domain (TMD) interactions. Here, we present the BLaTM assay that measures homotypic as well as heterotypic TMD-TMD interactions in a bacterial membrane. The system is based on complementation of β-lactamase fragments genetically fused to interacting TMDs, which confers ampicillin resistance to expressing cells. We validated BLaTM by showing that the assay faithfully reports known sequence-specific interactions of both types. In a practical application, we used BLaTM to screen a focussed combinatorial library for heterotypic interactions driven by electrostatic forces. The results reveal novel patterns of ionizable amino acids within the isolated TMD pairs. Those patterns indicate that formation of heterotypic TMD pairs is most efficiently supported by closely spaced ionizable residues of opposite charge. In addition, TMD heteromerization can apparently be driven by hydrogen bonding between basic or between acidic residues. PMID:28266525

  1. Ultrasound Applications in Food Processing

    Science.gov (United States)

    Bermúdez-Aguirre, Daniela; Mobbs, Tamara; Barbosa-Cánovas, Gustavo V.

    Food scientists today are focused on the development of not only microbiologically safe products with a long storage life, but, at the same time, products that have fresh-like characteristics and a high quality in taste, flavor, and texture. This focus is based on the needs of the consumer, which is one of the main reasons for constant research in the so-called area of emerging technologies. Traditionally, thermal treatments have been used to produce safe food products. Pasteurization of juice, milk, beer, and wine is a common process in which the final product has a storage life of some weeks (generally under refrigeration). However, vitamins, taste, color, and other sensorial characteristics are decreased with this treatment. High temperature is responsible for these effects and can be observed in the loss of nutritional components and changes in flavor, taste, and texture, often creating the need for additives to improve the product.

  2. Fuzzy image processing and applications with Matlab

    CERN Document Server

    Chaira, Tamalika

    2009-01-01

    In contrast to classical image analysis methods that employ ""crisp"" mathematics, fuzzy set techniques provide an elegant foundation and a set of rich methodologies for diverse image-processing tasks. However, a solid understanding of fuzzy processing requires a firm grasp of essential principles and background knowledge.Fuzzy Image Processing and Applications with MATLAB® presents the integral science and essential mathematics behind this exciting and dynamic branch of image processing, which is becoming increasingly important to applications in areas such as remote sensing, medical imaging,

  3. Radar signal processing and its applications

    CERN Document Server

    Hummel, Robert; Stoica, Petre; Zelnio, Edmund

    2003-01-01

    Radar Signal Processing and Its Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In twelve selected chapters, it describes the latest advances in architectures, design methods, and applications of radar signal processing. The contributors to this work were selected from the leading researchers and practitioners in the field. This work, originally published as Volume 14, Numbers 1-3 of the journal, Multidimensional Systems and Signal Processing, will be valuable to anyone working or researching in the field of radar signal processing. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

  4. Advances in heuristic signal processing and applications

    CERN Document Server

    Chatterjee, Amitava; Siarry, Patrick

    2013-01-01

    There have been significant developments in the design and application of algorithms for both one-dimensional signal processing and multidimensional signal processing, namely image and video processing, with the recent focus changing from a step-by-step procedure of designing the algorithm first and following up with in-depth analysis and performance improvement to instead applying heuristic-based methods to solve signal-processing problems. In this book the contributing authors demonstrate both general-purpose algorithms and those aimed at solving specialized application problems, with a spec

  5. Characterization of a novel blaIMP gene, blaIMP-58, using whole genome sequencing in a Pseudomonas putida isolate detected in Denmark

    DEFF Research Database (Denmark)

    Holmgaard, Dennis Back; Hansen, Frank; Hasman, Henrik;

    2017-01-01

    A multidrug-resistant strain of Pseudomonas putida was isolated from the urine of a 65-year-old women hospitalized for serious clinical conditions. Using whole genome sequencing a novel blaIMP gene, blaIMP-58 was discovered and characterized....

  6. Co-Carriage of blaKPC-2 and blaNDM-1 in Clinical Isolates of Pseudomonas aeruginosa Associated with Hospital Infections from India.

    Directory of Open Access Journals (Sweden)

    Deepjyoti Paul

    Full Text Available Global spread of KPC poses to be a serious threat complicating treatment options in hospital settings. The present study investigates the genetic environment of blaKPC-2 among clinical isolates of Pseudomonas aeruginosa from a tertiary referral hospital of India. The study isolates were collected from different wards and clinics of Silchar Medical College and Hospital, India, from 2012-2013. The presence of blaKPC was confirmed by genotypic characterization followed by sequencing. Cloning of the blaKPC-2 gene was performed and the genetic environment of this gene was characterized as well. Transferability of the resistance gene was determined by transformation assay and Southern hybridization. Additionally, restriction mapping was also carried out. Two isolates of P. aeruginosa were found to harbor blaKPC-2, were resistant towards aminoglycosides, quinolone and β-lactam-β-lactamase inhibitor combination. In both the isolates, the resistance determinant was associated with class 1 integron and horizontally transferable. Both the isolates were co-harboring blaNDM-1. The first detection of this integron mediated blaKPC-2 coexisting with blaNDM-1 in P. aeruginosa from India is worrisome, and further investigation is required to track the gene cassette mediated blaKPC-2 in terms of infection control and to prevent the spread of this gene in hospitals as well as in the community.

  7. APPLICATION OF MICROBIAL TECHNOLOGY TO MINERAL PROCESSING

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The application of microbial technology to mineral processing has been reviewed with respect to the bioleaching of metals from minerals, the influence of biotreatment on flotation, the biobene ficiation of nonmetallic minerals, and the biotreatment for mine waste reclamation.The application of microbial technology to mineral processing has shown the advantages of high efficiency, low energy and reagent consumption, low capital and operating costs, and low pollution of the environment.

  8. Protein engineering of enzymes for process applications

    DEFF Research Database (Denmark)

    Woodley, John M

    2013-01-01

    Scientific progress in the field of enzyme modification today enables the opportunity to tune a given biocatalyst for a specific industrial application. Much work has been focused on extending the substrate repertoire and altering selectivity. Nevertheless, it is clear that many new forthcoming...... opportunities will be targeted on modification to enable process application. This article discusses the challenges involved in enzyme modification focused on process requirements, such as the need to fulfill reaction thermodynamics, specific activity under the required conditions, kinetics at required...

  9. Identification and molecular characterization of Escherichia coli blaSHV genes in a Chinese teaching hospital.

    Science.gov (United States)

    Zhu, Mei; Yang, Guangjian; Li, Ailing; Zong, Li; Dong, Zhaoguang; Lu, Junwan; Zhang, Kaibo; Cheng, Cong; Chang, Qingli; Wu, Xiuying; Ying, Jianchao; Li, Xianneng; Ding, Li; Zheng, Haixiao; Yu, Junping; Ying, Jun; Xu, Teng; Yi, Huiguang; Li, Peizhen; Li, Kewei; Wu, Songquan; Bao, Qiyu; Wang, Junrong

    2017-02-05

    Escherichia coli (E. coli) commonly reside in human intestine and most E. coli strains are harmless, but some serotypes cause serious food poisoning. This study identified and molecularly characterized blaSHV genes from 490 E. coli strains with multi-drug resistance in a hospital population. PCR and molecular cloning and southern blot were performed to assess functions and localizations of this resistant E. coli gene and the pulsed-field gel electrophoresis (PFGE) was utilized to demonstrate the clonal relatedness of the positive E. coli strains. The data showed that 4 of these 490 E. coli strains (4/499, 0.8%) carried blaSHV genes that included EC D2485 (blaSHV-5), EC D2487 (blaSHV-5), EC D2684 (blaSHV-11) and EC D2616 (blaSHV-195, a novel blaSHV). Analysis of blaSHV open-reading frame showed that blaSHV-5 had a high hydrolysis activity to the broad-spectrum penicillin (ampicillin or piperacillin), ceftazidime, ceftriaxone, cefotaxime and aztreonam. blaSHV-195 and blaSHV-11 had similar resistant characteristics with high hydrolysis activities to ampicillin and piperacillin, but low activities to cephalosporins. Moreover, the two blaSHV-5 genes were located on a transferable plasmid (23kb), whereas the other two blaSHV variants (blaSHV-11 and blaSHV-195) seemed to be located in the chromosomal material. Both EC D2485 and EC D2487 clones isolated in 2010 had the same DNA finger printing profile and they might be the siblings of clonal dissemination. The data from the current study suggest that the novel blaSHV and clonal dissemination may be developed, although blaSHV genes were infrequently identified in this hospital population. The results of the work demonstrate the necessity for molecular surveillance in tracking blaSHV-producing strains in large teaching hospital settings and emphasize the need for epidemiological monitoring.

  10. Digital signal processing techniques and applications in radar image processing

    CERN Document Server

    Wang, Bu-Chin

    2008-01-01

    A self-contained approach to DSP techniques and applications in radar imagingThe processing of radar images, in general, consists of three major fields: Digital Signal Processing (DSP); antenna and radar operation; and algorithms used to process the radar images. This book brings together material from these different areas to allow readers to gain a thorough understanding of how radar images are processed.The book is divided into three main parts and covers:* DSP principles and signal characteristics in both analog and digital domains, advanced signal sampling, and

  11. Increasing secondary bacterial infections with Enterobacteriaceae harboring blaCTX-M-15 and blaCMY-6 in patients with bronchogenic carcinoma:an emerging point of concern

    Institute of Scientific and Technical Information of China (English)

    Mohammed Shahid; Abida Malik; Rakesh Bhargava

    2011-01-01

    Objective: To look for secondary bacterial infections in bronchogenic carcinoma (BCA) with resistant organisms harboring bla genes considering the paucity of relevant studies. Methods:A total of 137 confirmed cases of BCA and 34 healthy volunteers were studied for the occurrence and prevalence of blaCTX-M and and blaAmpC harboring-enterobacteriaceae. A subset of these patients (n=69) was previously reported for the secondary infection with the Aspergillus species. Bronchoalveolar lavages (BAL) were subjected for bacterial and fungal cultures and the bacterial isolates were screened by multiplex PCRs for the presence of blaCTX-M and blaAmpC. The isolates were also screened for the association of insertion sequence (IS26) by PCR and characterized by RAPD for any clonal relatedness. Results: A total of 143 bacterial isolates were obtained from 137 BAL specimens of BCA patients. The Enterobacteriaceae-isolates were multidrug-resistant showing concomitant resistance to fluoroquinolones and aminoglycosides. Both blaCTX-M and blaAmpC of CIT family were detected in 77.4% and 27.4% isolates, respectively. Sequencing revealed the presence of blaCTX-M-15 and blaCMY-6. Twenty one percent of the isolates were simultaneously harboring blaampC and blaCTX-M-15. IS26 PCR and RAPD typing revealed the presence of diverse bacterial population but no predominant clone was identified. The present study also suggests strong association of aspergillosis with lung cancer and further strengthens the potential use of non-validated serological tests suggested earlier. Conclusions: We emphasize that all patients of bronchogenic carcinoma should also be screened for secondary bacterial infections, along with secondary fungal infections, so as to introduce early and specific antimicrobial therapy and to prevent unwanted deaths.

  12. Outbreak Caused by blaOXA-72-Producing Acinetobacter baumannii ST417 Detected in Clinical and Environmental Isolates.

    Science.gov (United States)

    Tamayo-Legorreta, Elsa; Turrubiartes-Martínez, Edgar; Garza-Ramos, Ulises; Niño-Moreno, Perla; Barrios, Humberto; Sánchez-Pérez, Alejandro; Reyna-Flores, Fernando; Tovar-Oviedo, Juana; Magaña-Aquino, Martin; Cevallos, Miguel Angel; Silva-Sanchez, Jesus

    2016-03-01

    We characterized an outbreak of imipenem-resistant Acinetobacter baumannii with clinical and environmental isolates from a tertiary care hospital in San Luis Potosi, Mexico. During a 4-month period, a total of 32 nonrepetitive imipenem-resistant clinical isolates of A. baumannii were collected. All isolates were susceptible to colistin and tigecycline and resistant to cefepime, ceftazidime, ceftriaxone, imipenem, and meropenem. Genotyping by pulsed-field gel electrophoresis showed a major clone (A). Multilocus sequence type (MLST) analysis was performed, revealing sequence type (ST) 417 (ST417) and 208 (ST208). The blaIMP-, blaVIM-, blaGIM-, blaSIM-, blaNDM-type, and blaOXA-type (blaOXA-23-like, blaOXA-24-like, blaOXA-51-like, and blaOXA-58-like) genes were screened and showed that the blaOXA-51-like and blaOXA-24-like genes were present in all isolates. Sequencing and southern hybridization were performed, confirming the presence of the blaOXA-72 gene and its plasmid-borne nature. In addition, the blaOXA-72-XerC/XerD-like association was identified. These findings indicate that a clonal spread of blaOXA-72-producing A. baumannii ST417 had occurred throughout the hospital. The ST417 corresponded with a previous ST described in the United States.

  13. Chemometrics applications in biotech processes: a review.

    Science.gov (United States)

    Rathore, Anurag S; Bhushan, Nitish; Hadpe, Sandip

    2011-01-01

    Biotech unit operations are often characterized by a large number of inputs (operational parameters) and outputs (performance parameters) along with complex correlations amongst them. A typical biotech process starts with the vial of the cell bank, ends with the final product, and has anywhere from 15 to 30 such unit operations in series. The aforementioned parameters can impact process performance and product quality and also interact amongst each other. Chemometrics presents one effective approach to gather process understanding from such complex data sets. The increasing use of chemometrics is fuelled by the gradual acceptance of quality by design and process analytical technology amongst the regulators and the biotech industry, which require enhanced process and product understanding. In this article, we review the topic of chemometrics applications in biotech processes with a special focus on recent major developments. Case studies have been used to highlight some of the significant applications.

  14. Drug resistance of Acinetobacter baumannii and detection of blaOXA gene%鲍氏不动杆菌耐药性及blaOXA基因检测

    Institute of Scientific and Technical Information of China (English)

    张玉英; 赵志军; 师志云; 李刚; 贾伟

    2014-01-01

    目的:了解鲍氏不动杆菌(ABA)的耐药特点及blaOXA基因类型,为临床合理使用抗菌药物、有效控制医院感染的发生提供科学依据。方法收集医院自2006年1月-2009年12月临床感染标本分离的鲍氏不动杆菌309株采用K-B法进行药敏试验;利用PCR技术检测 blaOX A-23、blaOX A-24、blaOX A-51和 blaOX A-58基因。结果309株ABA对亚胺培南、美罗培南的耐药率最低,分别为19.7%、20.4%,其次是米诺环素29.5%,阿米卡星39.9%,对其余17种抗菌药物的耐药率均在>45.0%;blaOX A-23基因阳性46株,占14.9%,OX A-51基因阳性302株,占97.7%,未检测到blaOX A-24、blaOX A-58基因型。结论鲍氏不动杆菌耐药情况严重,blaOX A-23型碳青酶烯酶基因的产生是鲍氏不动杆菌耐药的重要机制之一。%OBJECTIVE To investigate the characteristics of drug resistance of Acinetobacter baumannii and observe the blaOXA genotypes so as to provide scientific bases for reasonable clinical use of antibiotics and effective control of nosocomial infections .METHODS From Jan 2006 to Dec 2009 ,totally 309 strains of A .baumannii isolated from infectious specimens were collected ,then the drug susceptibility testing was performed with the use of K-B meth-od ,and the PCR technique was employed to detect the blaOXA-23 ,blaOXA-24 ,blaOXA-51 ,and blaOXA-58 gene .RESULTS The drug resistance rate of the 309 strains of A .baumannii to imipenem was 19 .7% ,meropenem 20 .4% ,minocycline 29 .5% ,amikacin 39 .9% ;the drug resistance rates to other 17 antibiotics were more than 45 .0% .There were 46 (14 .9% ) strains with blaOXA-23 tested positive and 302 (97 .7% ) strains with blaOXA-51 tested positive ,while the genotypes of blaOXA-24 and blaOXA-58 have not been detected .CONCLUSION The A .baumannii strains are highly drug resistant ,and the production of carbapenemase gene blaOXA-23 is one of the important mechanisms of resistance

  15. Application of High Pressure in Food Processing

    Directory of Open Access Journals (Sweden)

    Herceg, Z.

    2011-01-01

    Full Text Available In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200 MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure processing of food include: inactivation of microorganisms, modification of biopolymers, quality retention (especially in terms of flavour and colour, and changes in product functionality. Food components responsible for the nutritive value and sensory properties of food remain unaffected by high pressure. Based on the theoretical background of high-pressure processing and taking into account its advantages and limitations, this paper aims to show its possible application in food processing. The paper gives an outline of the special equipment used in highpressure processing. Typical high pressure equipment in which pressure can be generated either by direct or indirect compression are presented together with three major types of high pressure food processing: the conventional (batch system, semicontinuous and continuous systems. In addition to looking at this technology’s ability to inactivate microorganisms at room temperature, which makes it the ultimate alternative to thermal treatments, this paper also explores its application in dairy, meat, fruit and vegetable processing. Here presented are the effects of high-pressure treatment in milk and dairy processing on the inactivation of microorganisms and the modification of milk protein, which has a major impact on rennet coagulation and curd formation properties of treated milk. The possible application of this treatment in controlling cheese manufacture, ripening and safety is discussed. The opportunities

  16. Investigation of diversity of plasmids carrying the blaTEM-52 gene

    DEFF Research Database (Denmark)

    Bielak, Eliza Maria; Bergenholtz, Rikke D.; Jørgensen, Mikael Skaanning;

    2011-01-01

    OBJECTIVES: To investigate the diversity of plasmids that carry blaTEM-52 genes among Escherichia coli and Salmonella enterica originating from animals, meat products and humans. METHODS: A collection of 22 blaTEM-52-encoding plasmids was characterized by restriction fragment length polymorphism...... of self-transfer to a plasmid-free E. coli recipient. CONCLUSIONS: The blaTEM-52 gene found in humans could have been transmitted on transferable plasmids originating from animal sources. Some of the blaTEM-52 plasmids carry replicons that differ from the classical ones. Two novel replicons were detected...

  17. DATA AND PROCESSING IN DEVELOPING ECCONOMIC APPLICATIONS

    Directory of Open Access Journals (Sweden)

    ADRIAN GHENCEA

    2011-04-01

    Full Text Available Economic Informatics originates in the industry economy and the electronic processing of information. A clear distinction is made between IT and economic informatics, and further between general and particular economic informatics (the particular economic informatics meaning administration, industrial informatics etc. Economic informatics is deemed to be an applicative science relating to the conception, working modality and representation of IT and communication systems, oriented towards companies which are using electronic computers. This paper pursues to integrate applications allowing the information systems to interconnect at informational level, by information sharing, and at service level, considering the control of the related processes in real time.

  18. blaCTX-M,blaTEM, andblaSHV inEnterobacteriaceae from North-Indian tertiary hospital:high occurrence of combination genes

    Institute of Scientific and Technical Information of China (English)

    Mohammed Shahid; Anuradha Singh; Farrukh Sobia; Mohammad Rashid; Abida Malik; Indu Shukla; Haris Manzoor Khan

    2011-01-01

    Objective:To delineate the frequency of occurrence ofblaCTX-M,blaTEM, andblaSHV in Enterobacteriaceae from North-Indian tertiary hospital.Methods: A random collection of a subset of45Escherichia coli (E. coli) and28Klebsiella pneumoniae (K. pneumoniae) that was resistant to a third generation cephalosporin and obtained during2007-2008 was selected for detailed screening forblaCTX-M,blaTEM, andblaSHV by monoplexPCRs. The isolates demonstrating the presence of blaCTX-M alleles were characterized for the specificCTX-M-genogroup by using a multiplexPCR.Results:Resistance to cefoperazone, ceftazidime, ceftriaxone, cefotaxime, cefoxitin and piperacillin was 100% each inK. pneumoniae isolates, whereas these resistance-rates forE. coli isolates were93.1%, 83.8%, 91.9%, 93.6%, 97.3% and97.1%, respectively. Concomitant resistance to aminoglycosides, quinolones and aztreonam was also noticed. Presence of any of the bla genes (blaCTX-M,blaTEM, andblaSHV) was noticed in a total of28 (38.4%) isolates of the73isolates studied. Many isolates demonstrated occurrence of these genes in various combinations.blaCTX-M,blaTEM, andblaSHV were noticed in 28.8%,10.9% and13.7% isolates, respectively. MultiplexPCR inblaCTX-Mharboring isolates demonstrated the presence ofCTX-M-Genogroup-1 and sequencing for the specificCTX-M-type revealed presence ofCTX-M-15 type. RAPD typing showed wide diversity in isolates.Conclusions:This is amongst the premier report describing the simultaneous occurrence ofblaTEM,blaSHV, andblaampC in IndianEnterobacteriaceae and that wider dissemination of these genes, as demonstrated by diversity of isolates, raises concern and emphasizes a need for extensive search for the presence of these gene pools in Indian subcontinent.

  19. Complete sequencing of an IncX3 plasmid carrying blaNDM-5 allele reveals an early stage in the dissemination of the blaNDM gene

    Directory of Open Access Journals (Sweden)

    M Krishnaraju

    2015-01-01

    Full Text Available Purpose: The aim of the present study was to perform molecular characterisation of the blaNDM plasmids and to understand the mechanism of its spread among pathogenic bacteria. Materials and Methods: Seventy-six non-repetitive carbapenem-resistant isolates which were collected during Nov 2011 to April 2013 from four hospitals in Chennai were analyzed for the presence of the blaNDM gene by PCR. Further, the genetic context of the blaNDM gene was analyzed by PCR specific to ISAba125 and bleMBL gene. One of the blaNDM plasmid was completely sequenced in the Illumina HiSeq platform. Results: Twenty-three isolates consisting of 8 Escherichia coli, 8 Klebsiella pneumoniae, 3 Klebsiella oxytoca, 3 Acinetobacter baumanii and 1 Pseudomonas aeruginosa were found to carry the blaNDM gene. In 18 isolates the blaNDM gene was associated with a bleMBL gene and the ISAba125 element. The complete sequencing of pNDM-MGR194 revealed an IncX3 replication type plasmid, with a length of 46,253 bp, an average GC content of 47% and 59 putative ORFs. The iteron region contained the blaNDM5 gene and the bleMBL , trpF and dsbC genes downstream and an IS5 inserted within the ISAba125 element upstream. Conclusion: This is the first report where the blaNDM gene insertion in a plasmid is not accompanied by other resistance gene determinants. These observations suggest that the IncX3 plasmid pNDM-MGR194 is an early stage in the dissemination of the blaNDM .

  20. High prevalence of multidrug-resistance in Acinetobacter baumannii and dissemination of carbapenemase-encoding genes blaOXA-23-like, blaOXA-24-like and blaNDM-1 in Algiers hospitals

    Institute of Scientific and Technical Information of China (English)

    Khadidja Khorsi; Yamina Messai; Moufida Hamidi; Houria Ammari; Rabah Bakour

    2015-01-01

    Objective:To assess and characterize antibiotic resistance in Acinetobacter baumannii strains recovered from 5 health-care facilities in Algiers. Methods:Antibiotic susceptibility testing was performed by agar diffusion and agar dilution methods, resistance genes were identified by PCR and sequencing, and molecular typing of isolates was carried out by enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR). Results:Among 125 tested isolates, 117 (93.6%) were multidrug-resistant, of which 94 (75.2%) were imipenem resistant. The blaADC and blaOXA-51-like genes were detected in all isolates, in association with ISAba1 sequence in 84%and 8%(imipenem resistant) of isolates, respectively. The blaOXA-23-like and blaOXA-24-like carbapenemase genes were detected in 67.02%and 20.21%of imipenem-resistant isolates, respectively. The blaOXA-23-like gene is linked to ISAba1 or ISAba4 elements. The metallo-β-lactamase NDM-1 gene was found in 10 (10.6%) imipenem-resistant strains from three hospitals, it is linked to ISAba125 element in nine strains. Extended spectrumβ-lactamases production was not detected. Imipenem and cefotaxime resistance phenotypes could not be transferred to Escherichia coli by conjugation. Outer membrane protein CarO gene was not detected in four imipenem-resistant isolates. The aac(6’)-Ib, sul1, sul2, tetA and tetB genes were present in 5.31%, 36.17%, 77.65%, 1.06%and 65.92%of strains, respectively. Class 1 integrons were detected in 23.4%strains. ERIC-PCR typing showed a genetic diversity among blaOXA-23-like and blaOXA-24-like positive strains, while clonality was observed among blaNDM-1 positives. Conclusions:This study highlighted the high prevalence of imipenem resistance in Acinetobacter baumannii in Algiers hospitals mediated mainly by blaOXA-23-like, blaOXA-24-like, and blaNDM-1 genes.

  1. Applications of text processing using natural processing system in Printer

    Science.gov (United States)

    Saito, Tadashi

    DAI NIPPON PRINTING CO., Ltd. developed a natural language processing system for the automatic indexing and assorting readable kana characters to kanji characters, which is called ruby. This system based on the automatic indexing system called INDEXER produced by NTT Communications and Information Processing Laboratories and NTT Data Communications Co., Ltd. This paper describes some applications using the system. This system creates kana characters for kanji characters which is useful for address books, name lists and books. Further we apply this system for an automatic indexing on CD-ROM.

  2. 7 CFR 1780.39 - Application processing.

    Science.gov (United States)

    2010-01-01

    ... interim funds. (e) Reserve requirements. Provision for the accumulation of necessary reserves over a... assessment bonds. Ordinarily, the requirements for reserves will be considered to have been met if general... orderly application assembly. The processing office will explain program requirements, public...

  3. Image Processing and its Military Applications

    Directory of Open Access Journals (Sweden)

    V. V.D. Shah

    1987-10-01

    Full Text Available One of the important breakthroughs, image processing is the stand alone, non-human image understanding system (IUS. The task of understanding images becomes monumental as one tries to define what understanding really is. Both pattern recognition and artificial intelligence are used in addition to traditional signal processing. Scene analysis procedures using edge and texture segmentation can be considered as the early stages of image understanding process. Symbolic representation and relationship grammers come at subsequent stages. Thus it is not reasonable to put a man into a loop of signal processing at certain sensors such as remotely piloted vehicles, satellites and spacecrafts. Consequently smart sensors and semi-automatic processes are being developed. Land remote sensing has been another important application of the image processing. With the introduction of programmes like Star Wars this particular application has gained a special importance from the Military's point of view. This paper provides an overview of digital image processing and explores the scope of the technology of remote sensing and IUSs from the Military's point of view. An example of the autonomous vehicle project now under progress in the US is described in detail to elucidate the impact of IUSs.

  4. Klebsiella pneumoniae Isolate from a New York City Hospital Belonging to Sequence Type 258 and Carrying blaKPC-2 and blaVIM-4.

    Science.gov (United States)

    Castanheira, Mariana; Deshpande, Lalitagauri M; Mills, Janet C; Jones, Ronald N; Soave, Rosemary; Jenkins, Stephen G; Schuetz, Audrey N

    2016-01-04

    Among 69 of 139 (49.6%) carbapenem-nonsusceptible Enterobacteriaceae carrying blaKPC, 1 Klebsiella pneumoniae was also positive for blaVIM. The isolate belonged to sequence type 258 (ST258) and carried blaKPC-2 on a copy of Tn4401a and blaVIM-4 on a class 1 integron. Genes were located on distinct plasmids belonging to Inc types A/C and FII. Elevated expression of the efflux pump AcrAB-TolC (acrA, 15.3 times) and reduced expression of outer membrane protein genes ompK35 and ompK37 (0.16 and 0.081 times, respectively) associated with various amino acid alterations on OmpK37 were observed. The presence of two carbapenemases in ST258 K. pneumoniae is of great concern due to the ability of this organism to widely disseminate.

  5. Computer performance optimization systems, applications, processes

    CERN Document Server

    Osterhage, Wolfgang W

    2013-01-01

    Computing power performance was important at times when hardware was still expensive, because hardware had to be put to the best use. Later on this criterion was no longer critical, since hardware had become inexpensive. Meanwhile, however, people have realized that performance again plays a significant role, because of the major drain on system resources involved in developing complex applications. This book distinguishes between three levels of performance optimization: the system level, application level and business processes level. On each, optimizations can be achieved and cost-cutting p

  6. Finite Markov processes and their applications

    CERN Document Server

    Iosifescu, Marius

    2007-01-01

    A self-contained treatment of finite Markov chains and processes, this text covers both theory and applications. Author Marius Iosifescu, vice president of the Romanian Academy and director of its Center for Mathematical Statistics, begins with a review of relevant aspects of probability theory and linear algebra. Experienced readers may start with the second chapter, a treatment of fundamental concepts of homogeneous finite Markov chain theory that offers examples of applicable models.The text advances to studies of two basic types of homogeneous finite Markov chains: absorbing and ergodic ch

  7. Evolution of IncA/C blaCMY-₂-carrying plasmids by acquisition of the blaNDM-₁ carbapenemase gene.

    Science.gov (United States)

    Carattoli, Alessandra; Villa, Laura; Poirel, Laurent; Bonnin, Rémy A; Nordmann, Patrice

    2012-02-01

    The bla(NDM-1) gene has been reported to be often located on broad-host-range plasmids of the IncA/C type in clinical but also environmental bacteria recovered from the New Delhi, India, area. IncA/C-type plasmids are the main vehicles for the spread of the cephalosporinase gene bla(CMY-2), frequently identified in the United States, Canada, and Europe. In this study, we completed the sequence of IncA/C plasmid pNDM-KN carrying the bla(NDM-1) gene, recovered from a Klebsiella pneumoniae isolate from Kenya. This sequence was compared with those of three IncA/C-type reference plasmids from Escherichia coli, Yersinia ruckeri, and Photobacterium damselae. Comparative analysis showed that the bla(NDM-1) gene was located on a widely diffused plasmid scaffold known to be responsible for the spread of bla(CMY-2)-like genes and consequently for resistance to broad-spectrum cephalosporins. Considering that IncA/C plasmids possess a broad host range, this scaffold might support a large-scale diffusion of the bla(NDM-1) gene among Gram-negative rods.

  8. β-Lactam Resistance Genes: Characterization, Epidemiology, and First Detection of blaCTX-M-1 and blaCTX-M-14 in Salmonella spp. Isolated from Poultry in Brazil-Brazil Ministry of Agriculture's Pathogen Reduction Program.

    Science.gov (United States)

    Fitch, Fernanda Marques; Carmo-Rodrigues, Mirian Silva; Oliveira, Vinicius Gomes Sales; Gaspari, Marcus Vinicius; Dos Santos, Amaury; de Freitas, Josinete Barros; Pignatari, Antonio C C

    2016-03-01

    Salmonella spp. are widespread in nature; however, human infections occur mainly through ingestion of contaminated food, specially poultry and eggs. In Brazil, the Ministry of Agriculture (MAPA) oversees food production in general, with the goal of preventing transmission of pathogens through the food chain. In 2004, MAPA initiated a program to monitor and control levels of Salmonella in poultry during slaughter. This study analyzes isolates from MAPA's program for β-lactam resistance and the resistance genes involved, as well as the geographic distributions of potentially clonal populations of resistant isolates within Brazil. Initially, 1,939 Salmonella spp. isolated between 2004 and 2011 were examined. These isolates were tested for antimicrobial susceptibility, and 100 isolates resistant or intermediate to ampicillin and ceftriaxone were screened initially for the presence of blaSHV, blaTEM, blaOXA, blaPSA, blaCMY-1, and blaCMY-2 genes. There were 55 isolates whose resistance genes were not identified by this panel and these isolates are the subject of this report. These 55 isolates were differentiated into 31 distinct ribogroups, with multiple β-lactam resistance genes, including AmpC blaCMY, blaTEM, blaCTX-M-1, blaCTX-M-2, blaCTX-M-8, and blaCTX-M-14. Isolates carrying variants of blaCTX-M were identified in three geographic regions. Salmonella carrying particular genetic variants of blaCTX-M and belonging to the same ribogroup were identified from multiple poultry slaughtering facilities. In some instances, these presumptive clonal-related isolates were from facilities over 300 miles apart, indicating potential clonal spread between two geographic regions. This is the first report of blaCTX-M-1 and blaCTX-M-14 in Salmonella in Brazil.

  9. Atmospheric Pressure Plasma Process And Applications

    Energy Technology Data Exchange (ETDEWEB)

    Peter C. Kong; Myrtle

    2006-09-01

    This paper provides a general discussion of atmospheric-pressure plasma generation, processes, and applications. There are two distinct categories of atmospheric-pressure plasmas: thermal and nonthermal. Thermal atmospheric-pressure plasmas include those produced in high intensity arcs, plasma torches, or in high intensity, high frequency discharges. Although nonthermal plasmas are at room temperatures, they are extremely effective in producing activated species, e.g., free radicals and excited state atoms. Thus, both thermal and nonthermal atmosphericpressure plasmas are finding applications in a wide variety of industrial processes, e.g. waste destruction, material recovery, extractive metallurgy, powder synthesis, and energy conversion. A brief discussion of recent plasma technology research and development activities at the Idaho National Laboratory is included.

  10. Atmospheric plasma processes for environmental applications

    OpenAIRE

    Shapoval, Volodymyr

    2012-01-01

    Plasma chemistry is a rapidly growing field which covers applications ranging from technological processing of materials, including biological tissues, to environmental remediation and energy production. The so called atmospheric plasma, produced by electric corona or dielectric barrier discharges in a gas at atmospheric pressure, is particularly attractive for the low costs and ease of operation and maintenance involved. The high concentrations of energetic and chemically active species (e.g...

  11. Applications of yeast flocculation in biotechnological processes

    OpenAIRE

    Domingues, Lucília; Vicente, A.A.; Lima, Nelson; Teixeira, J. A.

    2000-01-01

    A review on the main aspects associated with yeast flocculation and its application in biotechnological processes is presented. This subject is addressed following three main aspects – the basics of yeast flocculation, the development of “new” flocculating yeast strains and bioreactor development. In what concerns the basics of yeast flocculation, the state of the art on the most relevant aspects of mechanism, physiology and genetics of yeast flocculation is reported. The const...

  12. Pseudo random signal processing theory and application

    CERN Document Server

    Zepernick, Hans-Jurgen

    2013-01-01

    In recent years, pseudo random signal processing has proven to be a critical enabler of modern communication, information, security and measurement systems. The signal's pseudo random, noise-like properties make it vitally important as a tool for protecting against interference, alleviating multipath propagation and allowing the potential of sharing bandwidth with other users. Taking a practical approach to the topic, this text provides a comprehensive and systematic guide to understanding and using pseudo random signals. Covering theoretical principles, design methodologies and applications

  13. Yersinia enterocolitica and Photorhabdus asymbiotica β-lactamases BlaA are exported by the twin-arginine translocation pathway.

    Science.gov (United States)

    Schriefer, Eva-Maria; Hoffmann-Thoms, Stephanie; Schmid, Franz X; Schmid, Annika; Heesemann, Jürgen

    2013-01-01

    In general, β-lactamases of medically important Gram-negative bacteria are Sec-dependently translocated into the periplasm. In contrast, β-lactamases of Mycobacteria spp. (BlaC, BlaS) and the Gram-negative environmental bacteria Stenotrophomonas maltophilia (L2) and Xanthomonas campestris (Bla(XCC-1)) have been reported to be secreted by the twin-arginine translocation (Tat) system. Yersinia enterocolitica carries 2 distinct β-lactamase genes (blaA and blaB) encoding BlaA(Ye) and the AmpC-like β-lactamase BlaB, respectively. By using the software PRED-TAT for prediction and discrimination of Sec from Tat signal peptides, we identified a functional Tat signal sequence for Yersinia BlaA(Ye). The Tat-dependent translocation of BlaA(Ye) could be clearly demonstrated by using a Y. enterocolitica tatC-mutant and cell fractionation. Moreover, we could demonstrate a unique unusual temperature-dependent activity profile of BlaA(Ye) ranging from 15 to 60 °C and a high 'melting temperature' (T(M)=44.3°) in comparison to the related Sec-dependent β-lactamase TEM-1 (20-50°C, T(M)=34.9 °C). Strikingly, the blaA gene of Y. enterocolitica is present in diverse environmental Yersinia spp. and a blaA homolog gene could be identified in the closely related Photorhabdus asymbiotica (BlaA(Pa); 69% identity to BlaA(Ye)). For BlaA(Pa) of P. asymbiotica, we could also demonstrate Tat-dependent secretion. These results suggest that Yersinia BlaA-related β-lactamases may be the prototype of a large Tat-dependent β-lactamase family, which originated from environmental bacteria.

  14. Molecular detection of metallo-β-lactamase genes, blaIMP-1, blaVIM-2 and blaSPM-1 in imipenem resistant Pseudomonas aeruginosa isolated from clinical specimens in teaching hospitals of Ahvaz, Iran

    Directory of Open Access Journals (Sweden)

    Mojtaba Moosavian

    2015-10-01

    Full Text Available Background and Objectives: Carbapenem resistant Pseudomonas aeruginosa is a serious cause of nosocomial infections.The main purpose of the study is to determine the prevalence rate of imipenem resistant Pseudomonas aeruginosa carryingmetallo- beta- lactamase (MBL genes.Material and Methods: 236 Pseudomonas aeruginosa isolates were collected from teaching hospitals of Ahvaz Universityof Medical Sciences during a period of 9 months in 2012. These strains were identified using conventional microbiologicaltests. The susceptibility of isolates to antibiotics were assessed using disk diffusion test. The IMP-EDTA combination diskphenotypic test was performed for detection of MBL producing strains. Finally, polymerase chain reaction (PCR wasperformed to detect MBL genes, blaIMP-1, blaVIM-2 and blaSPM-1 in imipenem resistant strains.Results: Out of 236 examined isolates, 122 isolates (51.4% were resistant to imipenem. The IMP-EDTA combination testshowed that among 122 imipenem resistant strains, 110 strains (90% were phenotipically MBL producers. Additionally, theresults of PCR method showed that 2 strains (1.6% and 67strains (55% of imipenem resistant Pseudomonas aeruginosaisolates contained blaVIM-2 and blaIMP-1 genes respectively. No SPM-1gene was found in the examined samples.Conclusion: Resistance of P. aeruginosa isolates to imipenem due to MBL enzymes is increasing in Ahavaz. Becauseof clinical significance of this kind of resistance, rapid detection of MBL producing strains and followed by appropriatetreatment is necessary to prevent the spreading of these organisms.

  15. Specification and compilation of real-time stream processing applications

    NARCIS (Netherlands)

    Geuns, Stephanus Joannes

    2015-01-01

    This thesis is concerned with the specification, compilation and corresponding temporal analysis of real-time stream processing applications that are executed on embedded multiprocessor systems. An example of such applications are software defined radio applications. These applications typically hav

  16. Soft Computing Techniques for Process Control Applications

    Directory of Open Access Journals (Sweden)

    Rahul Malhotra

    2011-09-01

    Full Text Available Technological innovations in soft computing techniques have brought automation capabilities to new levelsof applications. Process control is an important application of any industry for controlling the complexsystem parameters, which can greatly benefit from such advancements. Conventional control theory isbased on mathematical models that describe the dynamic behaviour of process control systems. Due to lackin comprehensibility, conventional controllers are often inferior to the intelligent controllers. Softcomputing techniques provide an ability to make decisions and learning from the reliable data or expert’sexperience. Moreover, soft computing techniques can cope up with a variety of environmental and stabilityrelated uncertainties. This paper explores the different areas of soft computing techniques viz. Fuzzy logic,genetic algorithms and hybridization of two and abridged the results of different process control casestudies. It is inferred from the results that the soft computing controllers provide better control on errorsthan conventional controllers. Further, hybrid fuzzy genetic algorithm controllers have successfullyoptimized the errors than standalone soft computing and conventional techniques.

  17. Modelling and application of stochastic processes

    CERN Document Server

    1986-01-01

    The subject of modelling and application of stochastic processes is too vast to be exhausted in a single volume. In this book, attention is focused on a small subset of this vast subject. The primary emphasis is on realization and approximation of stochastic systems. Recently there has been considerable interest in the stochastic realization problem, and hence, an attempt has been made here to collect in one place some of the more recent approaches and algorithms for solving the stochastic realiza­ tion problem. Various different approaches for realizing linear minimum-phase systems, linear nonminimum-phase systems, and bilinear systems are presented. These approaches range from time-domain methods to spectral-domain methods. An overview of the chapter contents briefly describes these approaches. Also, in most of these chapters special attention is given to the problem of developing numerically ef­ ficient algorithms for obtaining reduced-order (approximate) stochastic realizations. On the application side,...

  18. Micro Nano Replication Processes and Applications

    CERN Document Server

    Kang, Shinill

    2012-01-01

    This book is an introduction to the fundamentals and processes for micro and nano molding for plastic components. In addition to the basics, the book covers applications details and examples. The book helps both students and professionals to understand and work with the growing tools of molding and uses for micro and nano-sized plastic parts.Provides a comprehensive presentation on fundamentals and practices of manufacturing for micro / nano sized plastics partsCovers a relatively new but fast-growing field that is impacting any industry using plastic parts in their products (electronics, tele

  19. Elementary process theory axiomatic introduction and applications

    CERN Document Server

    Cabbolet, Marcoen J T F

    2011-01-01

    Modern physics lacks a unitary theory that applies to all four fundamental interactions. This PhD thesis is a proposal for a single, complete, and coherent scheme of mathematically formulated elementary laws of nature. While the first chapter presents the general background, the second chapter addresses the method by which the main result has been developed. The next three chapters rigorously introduce the Elementary Process Theory, its mathematical foundations, and its applications to physics, cosmology and philosophy of mind. The final two chapters discuss the results and present the conclusions. Summarizing, the Elementary Process Theory is a scheme of seven well-formed closed expressions, written in the mathematical language of set matrix theory – a generalization of Zermelo-Fraenkel set theory. In the physical world, these seven expressions can be interpreted as elementary principles governing the universe at supersmall scale. The author critically confronts the theory with Quantum Mechanics and Genera...

  20. Multidrug-resistant Acinetobacter baumannii strains carrying the bla(OxA-23) and the bla(GES-11) genes in a neonatology center in Tunisia.

    Science.gov (United States)

    Charfi-Kessis, Karama; Mansour, Wejdene; Ben Haj Khalifa, Anis; Mastouri, Maha; Nordmann, Patrice; Aouni, Mahjoub; Poirel, Laurent

    2014-09-01

    Multidrug-resistant and difficult-to-treat Acinetobacter baumannii may be responsible for nosocomial infections. The production of carbapenem-hydrolyzing class D β-lactamases (CHDLs) and extended-spectrum β-lactamase (ESBLs) of the GES type possessing a carbapenemase activity has been increasingly reported worldwide in A. baumannii. The aim of this study was to analyze the resistance mechanisms of two carbapenem resistant A. baumannii clinical isolates recovered in a neonatology center in the center-east of Tunisia. Two carbapenem resistant A. baumannii isolates were recovered. The first isolate co-harbored the blaGES-11 ESBL gene and the blaOxA-23 CHDL gene. Analyses of the genetic location indicated that the blaGES-11 gene was plasmid located (Gr6). However, the blaOxA-23 gene was located on the chromosome. The second strain had only the blaOxA-23 CHDL gene, which was plasmid located. This study showed the first description of the GES-type β-lactamase in A. baumannii in Tunisia.

  1. Recent Process and Application of Electrochromism

    Directory of Open Access Journals (Sweden)

    WEI Youxiu

    2016-06-01

    Full Text Available Based on the research and development of electrochromism, its commercial applications have been realized in the areas of building windows, car rear-view mirrors and aircraft windows. In this paper, constructions, material category, working principles and characteristic requirements of electrochromic device were to described in details. Preparing methods of electrochromic films and technologies requirements for practicality were listed. The status of electrochromic technologies on commercialization and latest research were also summarized and analyzed. Electrochromism has great commercial potential and important social value for green and energy saving, which is the milestone in its developing process. At present, the trend of electrochromic technology is focused on seeking the technical route and process of saving time and cost, exploiting its application areas by combining other technologies and developing practical products. Wet chemical methods with industrial prospect have advantages of lowering cost and increasing efficiency, and can be a research hotspot for popularizing electrochromic technology. Moreover, the development and preparation of electrolyte layer will be the core technology in the future.

  2. Rotation Covariant Image Processing for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Henrik Skibbe

    2013-01-01

    Full Text Available With the advent of novel biomedical 3D image acquisition techniques, the efficient and reliable analysis of volumetric images has become more and more important. The amount of data is enormous and demands an automated processing. The applications are manifold, ranging from image enhancement, image reconstruction, and image description to object/feature detection and high-level contextual feature extraction. In most scenarios, it is expected that geometric transformations alter the output in a mathematically well-defined manner. In this paper we emphasis on 3D translations and rotations. Many algorithms rely on intensity or low-order tensorial-like descriptions to fulfill this demand. This paper proposes a general mathematical framework based on mathematical concepts and theories transferred from mathematical physics and harmonic analysis into the domain of image analysis and pattern recognition. Based on two basic operations, spherical tensor differentiation and spherical tensor multiplication, we show how to design a variety of 3D image processing methods in an efficient way. The framework has already been applied to several biomedical applications ranging from feature and object detection tasks to image enhancement and image restoration techniques. In this paper, the proposed methods are applied on a variety of different 3D data modalities stemming from medical and biological sciences.

  3. Application of Electroporation Technique in Biofuel Processing

    Directory of Open Access Journals (Sweden)

    Yousuf Abu

    2017-01-01

    Full Text Available Biofuels production is mostly oriented with fermentation process, which requires fermentable sugar as nutrient for microbial growth. Lignocellulosic biomass (LCB represents the most attractive, low-cost feedstock for biofuel production, it is now arousing great interest. The cellulose that is embedded in the lignin matrix has an insoluble, highly-crystalline structure, so it is difficult to hydrolyze into fermentable sugar or cell protein. On the other hand, microbial lipid has been studying as substitute of plant oils or animal fat to produce biodiesel. It is still a great challenge to extract maximum lipid from microbial cells (yeast, fungi, algae investing minimum energy.Electroporation (EP of LCB results a significant increase in cell conductivity and permeability caused due to the application of an external electric field. EP is required to alter the size and structure of the biomass, to reduce the cellulose crystallinity, and increase their porosity as well as chemical composition, so that the hydrolysis of the carbohydrate fraction to monomeric sugars can be achieved rapidly and with greater yields. Furthermore, EP has a great potential to disrupt the microbial cell walls within few seconds to bring out the intracellular materials (lipid to the solution. Therefore, this study aims to describe the challenges and prospect of application of EP technique in biofuels processing.

  4. Materials, Applications and Processes in Photocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Keller, N.; Robert, D.; Herrmann, J.M.; Keller, V. (eds.)

    2007-04-15

    Catalysis Today publishes special issues only. The Journal focuses on the rapid publication of invited papers devoted to currently important topics in catalysis and related subjects. Both fundamental and applied aspects of catalysis are covered. While many of the issues are concerned with heterogeneous catalysis, subjects such as homogeneous catalysis and enzymatic catalysis may also be included. Subjects related to catalysis such as techniques, adsorption, process technology and others are included if there is a clear relationship with catalysis. This special issue concerns 21 papers on Materials, Applications and Processes in Photocatalysis: (1) Photoactive titania nanostructured thin films: Synthesis and characteristics of ordered helical nanocoil array; (2) The design of highly active rectangular column-structured titanium oxide photocatalysts and their application in purification systems; (3) Photosensitization of TiO{sub 2} by M{sub x}O{sub y} and M{sub x}S{sub y} nanoparticles for heterogeneous photocatalysis applications; (4) Oxidation of nauseous sulfur compounds by photocatalysis or photosensitization; (5) In situ characterization of the highly dispersed Mo{sup 6+}-oxide species supported onto various oxides and their photocatalytic reactivities; (6) The photocatalytic reforming of methanol; (7) Photocatalysis for new energy production: Recent advances in photocatalytic water splitting reactions for hydrogen production; (8) Visible light induced hydrogen evolution over the heterosystem Bi{sub 2}S{sub 3}/TiO{sub 2}; (9) Modeling and optimizing irradiance on planar, folded, and honeycomb shapes to maximize photocatalytic air purification; (10) Dimensionless analysis of slurry photocatalytic reactors using two-flux and six-flux radiation absorption-scattering models; (11) Photoreactions occurring on metal-oxide surfaces are not all photocatalytic: Description of criteria and conditions for processes to be photocatalytic; (12) Temperature dependent

  5. A generalized Cauchy process and its application to relaxation phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Lim, S C [Faculty of Engineering, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia); Li Ming [School of Information Science and Technology, East China Normal University, Shanghai 200026 (China)

    2006-03-24

    We study some of the basic properties of a generalized Cauchy process indexed by two parameters. The application of the Lamperti transformation to the generalized Cauchy process leads to a self-similar process which preserves the long-range dependence. The asymptotic properties of spectral density of the process are derived. Possible application of this process to model relaxation phenomena is considered.

  6. Biomechanical microsystems design, processing and applications

    CERN Document Server

    Ostasevicius, Vytautas; Palevicius, Arvydas; Gaidys, Rimvydas; Jurenas, Vytautas

    2017-01-01

    This book presents the most important aspects of analysis of dynamical processes taking place on the human body surface. It provides an overview of the major devices that act as a prevention measure to boost a person‘s motivation for physical activity. A short overview of the most popular MEMS sensors for biomedical applications is given. The development and validation of a multi-level computational model that combines mathematical models of an accelerometer and reduced human body surface tissue is presented. Subsequently, results of finite element analysis are used together with experimental data to evaluate rheological properties of not only human skin but skeletal joints as well. Methodology of development of MOEMS displacement-pressure sensor and adaptation for real-time biological information monitoring, namely “ex vivo” and “in vitro” blood pulse type analysis, is described. Fundamental and conciliatory investigations, achieved knowledge and scientific experience about biologically adaptive mu...

  7. The Generalized Pareto process; with application

    CERN Document Server

    Ferreira, Ana

    2012-01-01

    In extreme value statistics the peaks-over-threshold method is widely used. The method is based on the Generalized Pareto distribution (Balkema and de Haan (1974), Pickands (1975) in univariate theory and e.g. Falk, H\\"usler and Reiss (2010), Rootz\\'en and Tajvidi (2006) in multivariate theory) characterizing probabilities of exceedances over high thresholds. We present a generalization of this concept in the space of continuous functions. We call this the Generalized Pareto process. Different from earlier papers our definition is not based on a distribution function but on functional properties. As an application we use the theory to produce wind fields connected to disastrous storms on the basis of observed extreme but not disastrous storms.

  8. Application of Glass Transition in Food Processing.

    Science.gov (United States)

    Balasubramanian, S; Devi, Apramita; Singh, K K; Bosco, S J D; Mohite, Ashish M

    2016-01-01

    The phenomenon of glass transition has been employed to food products to study their stability. It can be applied as an integrated approach along with water activity and physical and chemical changes in food in processing and storage to determine the food stability. Also associated with the changes during agglomeration crystallization, caking, sticking, collapse, oxidation reactions, nonenzymatic browning, and microbial stability of food system. Various techniques such as Differential Scanning Calorimetry, Nuclear Magnetic Resonance, etc. have been developed to determine the glass transition temperature (Tg) of food system. Also, various theories have been applied to explain the concept of Tg and its relation to changes in food system. This review summarizes the understanding of concept of glass transition, its measurement, and application in food technology.

  9. Detection and characterization of extended-spectrum β-lactamases (blaCTX-M-1 and blaSHV producing Escherichia coli, Salmonella spp. and Klebsiella pneumoniae isolated from humans in Mizoram

    Directory of Open Access Journals (Sweden)

    Iadarilin Warjri

    2015-05-01

    Full Text Available Aim: The present study was conducted to isolate and characterize the extended spectrum β-lactamases (ESBLs producing enteric bacteria in human beings in Mizoram, India. Materials and Methods: Fecal samples were collected from human beings with or without the history of diarrhea from different hospitals of Mizoram. Samples were processed for isolation and identification of Escherichia coli, Salmonella and Klebsiella pneumoniae. All the isolates were subjected to antibiotic sensitivity assays. Phenotypically, ESBLs production ability was determined by double discs synergy test (DDST method. ESBLs producing isolates were subjected to polymerase chain reaction (PCR for detection of ESBLs genes. Plasmids were cured by acridine orange. Transfer of resistance from a donor to recipient strains was done by in vitro horizontal method. Results: A total of 414 enteric bacteria were isolated from 180 fecal samples (113 were from diarrheic patients and 67 were from non-diarrheic patients, of which 333 (80.44%, 52 (12.56%, and 29 (7.00% were E. coli, K. pneumoniae and Salmonella spp., respectively. Double discs synergy test (DDST exhibited 72 (21.62% E. coli, 12 (23.08% K. pneumoniae and 4 (13.79% Salmonella spp. were ESBLs producers. Altogether, 24 (13.04% isolates were found to be positive for at least one resistance genes under this study. A total of 36 (8.70% E. coli, 4 (0.97% K. pneumoniae and 2 (0.48% Salmonella spp. were found to be positive for blaCTX-M-1 gene by PCR. Similarly, 5 (1.21% E. coli and 4 (0.97% K. pneumoniae isolates were found to be positive for blaSHV gene. A total of 3 (0.72% K. pneumoniae isolates were recorded as positive for both blaCTX-M-1 and blaSHV genes. All the isolates were carrying plasmids ranging between 0.9 kb and ~30 kb. The resistance plasmid could not be transferred to a recipient by in vitro horizontal gene transfer method. Conclusion: ESBLs producing enteric bacteria are circulating in human population in North

  10. Occurrence of blaNDM-1 & absence of blaKPC genes encoding carbapenem resistance in uropathogens from a tertiary care centre from north India

    Directory of Open Access Journals (Sweden)

    Balvinder Mohan

    2015-01-01

    Interpretation & conclusions: The bla NDM-1 gene was absent in our isolates obtained during 2008 but was present amongst Enterobacteriaceae isolated in 2012. The bla KPC gene was also not found. Nine isolates obtained during the two years had multiple genes encoding carbapenemases confirming the previous reports of emergence of GNB containing genes encoding multiple carbapenemases. Typing using BOX-PCR indicated that this emergence was not because of clonal expansion of a single strain, and multiple strains were circulating at a single point of time.

  11. Carbapenem-resistant Acinetobacter pittii strain harboring blaOXA-72 from Brazil.

    Science.gov (United States)

    Chagas, Thiago Pavoni Gomes; Tavares E Oliveira, Thamirys Rachel; D'Alincourt Carvalho-Assef, Ana Paula; Albano, Rodolpho M; Asensi, Marise Dutra

    2017-02-06

    In this study, we report the isolation of OXA-72-producing Acinetobacter pittii in Brazil. A carbapenem-resistant A. pittii strain was recovered from a hospitalized female patient from Espírito Santo, Southeastern Brazil. PCR screening and DNA sequencing allowed us to identify the presence of blaOXA-72. We observed blaOXA-72 in a ~11kb plasmid and flanked by XerC/XerD-binding sites.

  12. 47 CFR 76.41 - Franchise application process.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Franchise application process. 76.41 Section 76... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Cable Franchise Applications § 76.41 Franchise application process. (a) Definition. Competitive franchise applicant. For the purpose of this section, an...

  13. Evaluation of LAMP assay using phenotypic tests and conventional PCR for detection of blaNDM-1 and blaKPC genes among carbapenem-resistant clinical Gram-negative isolates.

    Science.gov (United States)

    Solanki, Rachana; Vanjari, Lavanya; Ede, Nagapriyanka; Gungi, Akhila; Soory, Amarendranath; Vemu, Lakshmi

    2013-10-01

    Carbapenem-resistant pathogens cause infections associated with significant morbidity and mortality. This study evaluates the use of the loop-mediated isothermal amplification (LAMP) assay for rapid and cost-effective detection of bla(NDM-1) and bla(KPC) genes among carbapenem-resistant Gram-negative bacteria in comparison with conventional PCR and existing phenotypic methods. A total of 60 carbapenem-resistant clinical isolates [Escherichia coli (15), Klebsiella pneumoniae (22), Acinetobacter baumannii (23)] were screened for the presence of carbapenemases (bla(KPC) and bla(NDM-1)) using phenotypic methods such as the modified Hodge test (MHT) and combined disc test (CDT) and molecular methods such as conventional PCR and LAMP assay. In all, 47/60 isolates (78.3%) were MHT positive while 48 isolates were positive by CDT [46.6% positive with EDTA, 30% with 3' aminophenylboronic acid (APB) plus EDTA and 1.6% with APB alone]. Isolates showing CDT positivity with EDTA or APB contained bla(NDM-1) and bla(KPC) genes, respectively. bla(NDM-1) was present as a lone gene in 28 isolates (46.7%) and present together with the bla(KPC) gene in 19 isolates (31.7%). Only one E. coli isolate had a lone bla(KPC) gene. The LAMP assay detected either or both bla(NDM-1) and bla(KPC) genes in four isolates that were missed by conventional PCR. Neither gene could be detected in 12 (20%) isolates. The LAMP assay has greater sensitivity, specificity and rapidity compared to the phenotypic methods and PCR for the detection of bla(NDM-1) and bla(KPC). With a turnaround time of only 2-3 h, the LAMP assay can be considered a point-of-care assay.

  14. Decision analysis applications and the CERCLA process

    Energy Technology Data Exchange (ETDEWEB)

    Purucker, S.T.; Lyon, B.F. [Oak Ridge National Lab., TN (United States). Risk Analysis Section]|[Univ. of Tennessee, Knoxville, TN (United States)

    1994-06-01

    Quantitative decision methods can be developed during environmental restoration projects that incorporate stakeholder input and can complement current efforts that are undertaken for data collection and alternatives evaluation during the CERCLA process. These decision-making tools can supplement current EPA guidance as well as focus on problems that arise as attempts are made to make informed decisions regarding remedial alternative selection. In examining the use of such applications, the authors discuss the use of decision analysis tools and their impact on collecting data and making environmental decisions from a risk-based perspective. They will look at the construction of objective functions for quantifying different risk-based perspective. They will look at the construction of objective functions for quantifying different risk-based decision rules that incorporate stakeholder concerns. This represents a quantitative method for implementing the Data Quality Objective (DQO) process. These objective functions can be expressed using a variety of indices to analyze problems that currently arise in the environmental field. Examples include cost, magnitude of risk, efficiency, and probability of success or failure. Based on such defined objective functions, a project can evaluate the impact of different risk and decision selection strategies on data worth and alternative selection.

  15. Global Escherichia coli Sequence Type 131 Clade with blaCTX-M-27 Gene.

    Science.gov (United States)

    Matsumura, Yasufumi; Pitout, Johann D D; Gomi, Ryota; Matsuda, Tomonari; Noguchi, Taro; Yamamoto, Masaki; Peirano, Gisele; DeVinney, Rebekah; Bradford, Patricia A; Motyl, Mary R; Tanaka, Michio; Nagao, Miki; Takakura, Shunji; Ichiyama, Satoshi

    2016-11-01

    The Escherichia coli sequence type (ST) 131 C2/H30Rx clade with the blaCTX-M-15 gene had been most responsible for the global dissemination of extended-spectrum β-lactamase (ESBL)-producing E. coli. ST131 C1/H30R with blaCTX-M-27 emerged among ESBL-producing E. coli in Japan during the late 2000s. To investigate the possible expansion of a single clade, we performed whole-genome sequencing for 43 Japan and 10 global ST131 isolates with blaCTX-M-27 (n = 16), blaCTX-M-14 (n = 16), blaCTX-M-15 (n = 13), and others (n = 8). We also included 8 ST131 genomes available in public databases. Core genome-based analysis of 61 isolates showed that ST131 with blaCTX-M-27 from 5 countries formed a distinct cluster within the C1/H30R clade, named C1-M27 clade. Accessory genome analysis identified a unique prophage-like region, supporting C1-M27 as a distinct clade. Our findings indicate that the increase of ESBL-producing E. coli in Japan is due mainly to emergence of the C1-M27 clade.

  16. Multivariate Statistical Process Control Process Monitoring Methods and Applications

    CERN Document Server

    Ge, Zhiqiang

    2013-01-01

      Given their key position in the process control industry, process monitoring techniques have been extensively investigated by industrial practitioners and academic control researchers. Multivariate statistical process control (MSPC) is one of the most popular data-based methods for process monitoring and is widely used in various industrial areas. Effective routines for process monitoring can help operators run industrial processes efficiently at the same time as maintaining high product quality. Multivariate Statistical Process Control reviews the developments and improvements that have been made to MSPC over the last decade, and goes on to propose a series of new MSPC-based approaches for complex process monitoring. These new methods are demonstrated in several case studies from the chemical, biological, and semiconductor industrial areas.   Control and process engineers, and academic researchers in the process monitoring, process control and fault detection and isolation (FDI) disciplines will be inter...

  17. Software engineering processes principles and applications

    CERN Document Server

    Wang, Yingxu

    2000-01-01

    Fundamentals of the Software Engineering ProcessIntroductionA Unified Framework of the Software Engineering ProcessProcess AlgebraProcess-Based Software EngineeringSoftware Engineering Process System ModelingThe CMM ModelThe ISO 9001 ModelThe BOOTSTRAP ModelThe ISO/IEC 15504 (SPICE) ModelThe Software Engineering Process Reference Model: SEPRMSoftware Engineering Process System AnalysisBenchmarking the SEPRM ProcessesComparative Analysis of Current Process ModelsTransformation of Capability Levels Between Current Process ModelsSoftware Engineering Process EstablishmentSoftware Process Establish

  18. Chemometrics applications in biotech processes: assessing process comparability.

    Science.gov (United States)

    Bhushan, Nitish; Hadpe, Sandip; Rathore, Anurag S

    2012-01-01

    A typical biotech process starts with the vial of the cell bank, ends with the final product and has anywhere from 15 to 30 unit operations in series. The total number of process variables (input and output parameters) and other variables (raw materials) can add up to several hundred variables. As the manufacturing process is widely accepted to have significant impact on the quality of the product, the regulatory agencies require an assessment of process comparability across different phases of manufacturing (Phase I vs. Phase II vs. Phase III vs. Commercial) as well as other key activities during product commercialization (process scale-up, technology transfer, and process improvement). However, assessing comparability for a process with such a large number of variables is nontrivial and often companies resort to qualitative comparisons. In this article, we present a quantitative approach for assessing process comparability via use of chemometrics. To our knowledge this is the first time that such an approach has been published for biotech processing. The approach has been applied to an industrial case study involving evaluation of two processes that are being used for commercial manufacturing of a major biosimilar product. It has been demonstrated that the proposed approach is able to successfully identify the unit operations in the two processes that are operating differently. We expect this approach, which can also be applied toward assessing product comparability, to be of great use to both the regulators and the industry which otherwise struggle to assess comparability.

  19. On some applications of diffusion processes for image processing

    Energy Technology Data Exchange (ETDEWEB)

    Morfu, S., E-mail: smorfu@u-bourgogne.f [Laboratoire d' Electronique, Informatique et Image (LE2i), UMR Cnrs 5158, Aile des Sciences de l' Ingenieur, BP 47870, 21078 Dijon Cedex (France)

    2009-06-29

    We propose a new algorithm inspired by the properties of diffusion processes for image filtering. We show that purely nonlinear diffusion processes ruled by Fisher equation allows contrast enhancement and noise filtering, but involves a blurry image. By contrast, anisotropic diffusion, described by Perona and Malik algorithm, allows noise filtering and preserves the edges. We show that combining the properties of anisotropic diffusion with those of nonlinear diffusion provides a better processing tool which enables noise filtering, contrast enhancement and edge preserving.

  20. Rapid thermal processing and beyond applications in semiconductor processing

    CERN Document Server

    Lerch, W

    2008-01-01

    Heat-treatment and thermal annealing are very common processing steps which have been employed during semiconductor manufacturing right from the beginning of integrated circuit technology. In order to minimize undesired diffusion, and other thermal budget-dependent effects, the trend has been to reduce the annealing time sharply by switching from standard furnace batch-processing (involving several hours or even days), to rapid thermal processing involving soaking times of just a few seconds. This transition from thermal equilibrium, to highly non-equilibrium, processing was very challenging a

  1. Radar micro-doppler signatures processing and applications

    CERN Document Server

    Chen, Victor C; Miceli, William J

    2014-01-01

    Radar Micro-Doppler Signatures: Processing and applications concentrates on the processing and application of radar micro-Doppler signatures in real world situations, providing readers with a good working knowledge on a variety of applications of radar micro-Doppler signatures.

  2. 47 CFR 73.4017 - Application processing: Commercial FM stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Application processing: Commercial FM stations... RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.4017 Application processing: Commercial FM stations. See Report and Order, MM Docket 84-750, FCC 85-125, adopted March 4,...

  3. How to identify Raoultella spp. including R. ornithinolytica isolates negative for ornithine decarboxylase? The reliability of the chromosomal bla gene.

    Science.gov (United States)

    Walckenaer, Estelle; Leflon-Guibout, Véronique; Nicolas-Chanoine, Marie-Hélène

    2008-12-01

    Although Raoultella planticola and Raoultella ornithinolytica were described more than 20 years ago, identifying them remains difficult. The reliability of the chromosomal bla gene for this identification was evaluated in comparison with that of the 16S rDNA and rpoB genes in 35 Raoultella strains from different origins. Of the 26 strains previously identified as R. planticola by biochemical tests alone or in association with molecular methods, 21 harboured a bla gene with 99.8% identity with the bla gene of two reference R. ornithinolytica strains (bla(ORN) gene) and 5 harboured a bla gene with 99.2% identity with the bla gene of two reference R. planticola strains (bla(PLA) gene). The 9 isolates previously identified as R. ornithinolytica harboured a bla(ORN) gene. The bla gene-based identification was confirmed by 16S rDNA and rpoB sequencing. The 21 isolates newly identified as R. ornithinolytica had a test negative for ornithine decarboxylase (ODC). Molecular experiments suggested one copy of ODC-encoding gene in both ODC-negative R. ornithinolytica and R. planticola strains and two copies in ODC-positive R. orninthinolytica strains. Analysis of the 35 bla genes allowed us (i) to confirm an identity of only 94% between the bla genes of the two Raoultella species while this identity was > 98% for rpoB and > 99% for 16S rDNA genes and (ii) to develop and successfully apply a bla PCR RFLP assay for Raoultella spp. identification. Overall, this study allowed us to discover ODC-negative R. ornithinolytica and to provide a reliable Raoultella identification method widely available as not requiring sequencing equipment.

  4. Identification of Acinetobacter baumannii by detection of the blaOXA-51-like carbapenemase gene intrinsic to this species.

    Science.gov (United States)

    Turton, Jane F; Woodford, Neil; Glover, Judith; Yarde, Susannah; Kaufmann, Mary E; Pitt, Tyrone L

    2006-08-01

    bla(OXA-51-like) was sought in clinical isolates of Acinetobacter species in a multiplex PCR, which also detects bla(OXA-23-like) and class 1 integrase genes. All isolates that gave a band for bla(OXA-51-like) identified as A. baumannii. This gene was detected in each of 141 isolates of A. baumannii but not in those of 22 other Acinetobacter species.

  5. Representation of cointegrated autoregressive processes with application to fractional processes

    DEFF Research Database (Denmark)

    Johansen, Søren

    2009-01-01

    We analyse vector autoregressive processes using the matrix valued characteristic polynomial. The purpose of this  paper is to give a survey of the mathematical results on inversion of a matrix polynomial in case there are unstable roots, to study integrated and cointegrated processes. The new...

  6. Specifying Processes: Application to Electrical Power Distribution

    OpenAIRE

    Sabah Al-Fedaghi; Lina Al-Saleh

    2011-01-01

    Problem statement: This study deals with the problem of how to specify processes. Many process specification methodologies have been determined to be incomplete; for example, ISO 9000:2005 defines process as transforming media inputs into outputs. Nevertheless, the author of the Quality Systems Handbook, declares that such a definition is incomplete because processes create results and not necessarily by transforming inputs. Still, it is not clear what description of process can embed transfo...

  7. Characterization of the genetic environment of the blaKPC-2 gene among Klebsiella pneumoniae isolates from a Chinese Hospital.

    Science.gov (United States)

    Shen, Pinghua; Zhang, Ying; Li, Gang; Jiang, Xiaofei

    2016-01-01

    Infection caused by carbapenem-resistant Klebsiella pneumoniae has become a major healthcare threat and KPC-2 enzyme is a dominant factor mediating carbapenems resistance in K. pneumoniae. This study was designed to determine the genetic environment of blaKPC-2, which prevailed in clinical K. pneumoniae isolates recovered in Huashan Hospital, Shanghai, China. Forty-two clinical isolates were included in this study by blaKPC-2 screening. After multilocus sequence typing and plasmid analyses of PCR-based replicon typing (PBRT), junction PCR, mapping PCR and crossing PCR assays, primer walking, and amplicon sequencing were used to analyze the genetic environment of the blaKPC-2 gene. ST423, ST65, ST977, and ST11 were all detected in KPC-2-producing K. pneumoniae. Two types of blaKPC-2-bearing genetic structure were found: Tn1721-blaKPC-2-Tn3 and Tn1721-blaKPC-2-ΔTn3-IS26; and were carried in IncX and IncFII plasmids, respectively. In conclusion, the genetic environment of the blaKPC-2 gene was diverse and Tn1721-blaKPC-2-ΔTn3-IS26 was dominant in clinical K. pneumoniae isolates in Huashan Hospital. This study sheds some light on the genetic environment and should foster further studies about the mechanism of the blaKPC-2 dissemination.

  8. Parallel and distributed processing: applications to power systems

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Felix; Murphy, Liam [California Univ., Berkeley, CA (United States). Dept. of Electrical Engineering and Computer Sciences

    1994-12-31

    Applications of parallel and distributed processing to power systems problems are still in the early stages. Rapid progress in computing and communications promises a revolutionary increase in the capacity of distributed processing systems. In this paper, the state-of-the art in distributed processing technology and applications is reviewed and future trends are discussed. (author) 14 refs.,1 tab.

  9. Continuous-time Markov decision processes theory and applications

    CERN Document Server

    Guo, Xianping

    2009-01-01

    This volume provides the first book entirely devoted to recent developments on the theory and applications of continuous-time Markov decision processes (MDPs). The MDPs presented here include most of the cases that arise in applications.

  10. 13 CFR 400.205 - Application process.

    Science.gov (United States)

    2010-01-01

    ... transmission or electronic mail. (b) Applications shall contain the following: (1) A completed Form “Application for Steel Guarantee Loan”; (2) The information required for the completion of Form “Environmental..., cash flow, average realized prices and average realized production costs. If the loan funds are to...

  11. Poisson point processes and their application to Markov processes

    CERN Document Server

    Itô, Kiyosi

    2015-01-01

    An extension problem (often called a boundary problem) of Markov processes has been studied, particularly in the case of one-dimensional diffusion processes, by W. Feller, K. Itô, and H. P. McKean, among others. In this book, Itô discussed a case of a general Markov process with state space S and a specified point a ∈ S called a boundary. The problem is to obtain all possible recurrent extensions of a given minimal process (i.e., the process on S \\ {a} which is absorbed on reaching the boundary a). The study in this lecture is restricted to a simpler case of the boundary a being a discontinuous entrance point, leaving a more general case of a continuous entrance point to future works. He established a one-to-one correspondence between a recurrent extension and a pair of a positive measure k(db) on S \\ {a} (called the jumping-in measure and a non-negative number m< (called the stagnancy rate). The necessary and sufficient conditions for a pair k, m was obtained so that the correspondence is precisely de...

  12. Parallelism and Scalability in an Image Processing Application

    DEFF Research Database (Denmark)

    Rasmussen, Morten Sleth; Stuart, Matthias Bo; Karlsson, Sven

    2009-01-01

    parallel programs. This paper investigates parallelism and scalability of an embedded image processing application. The major challenges faced when parallelizing the application were to extract enough parallelism from the application and to reduce load imbalance. The application has limited immediately......The recent trends in processor architecture show that parallel processing is moving into new areas of computing in the form of many-core desktop processors and multi-processor system-on-chips. This means that parallel processing is required in application areas that traditionally have not used...

  13. Parallelism and Scalability in an Image Processing Application

    DEFF Research Database (Denmark)

    Rasmussen, Morten Sleth; Stuart, Matthias Bo; Karlsson, Sven

    2008-01-01

    parallel programs. This paper investigates parallelism and scalability of an embedded image processing application. The major challenges faced when parallelizing the application were to extract enough parallelism from the application and to reduce load imbalance. The application has limited immediately......The recent trends in processor architecture show that parallel processing is moving into new areas of computing in the form of many-core desktop processors and multi-processor system-on-chip. This means that parallel processing is required in application areas that traditionally have not used...

  14. Beta-Lactamase Encoded Genes blaTEM and blaCTX Among Acinetobacter baumannii Species Isolated From Medical Devices of Intensive Care Units in Tehran Hospitals

    Science.gov (United States)

    Khalilzadegan, Sara; Sade, Mojtaba; Godarzi, Hussein; Eslami, Gita; Hallajzade, Masoumeh; Fallah, Fatemeh; Yadegarnia, Davood

    2016-01-01

    Background Excessive consumption of antimicrobial materials in hospitals is considered as the main encoder leading to the emergence, development and acquisition of new bacterial resistance to beta-lactamase. Objectives Owing to the lack of proper information regarding the mechanism of the bacterial resistance to antibiotics and responsible genes in the country, the current study aimed to consider the resistance or sensitivity of the Acinetobacter baumannii multi drug resistant (MDR) isolates facing 2% glutaraldehyde. The study was conducted in the selected intensive care units in Tehran hospitals, Iran, in 2013. Materials and Methods In this study conducted over a period of 10 months, A. baumannii species were isolated by bacterial culture following biochemical tests from intensive care units (ICUs) of some hospitals in Tehran, Iran (Fayazbaksh, Taleghani, Imam Khomeini, Valiasr, Labafinejad). The resistance and sensitivity of the isolates to antibiotics were considered according to the clinical and laboratory standard institute CLSI (2012) guidelines. By multiplex PCR method, blaCTX and blaTEM genes were detected and finally, MDR strains were treated with 2% glutaraldehyde. PCR was used for each strain of MDR using specific primers. Results In the current study, 131 A. baumannii isolates (22.3%) out of 588 were studied. The level of resistance to various antibiotics was in the range of 69.4% to 100%. The frequencies of blaTEM and blaCTX genes were 3.2% and 19.4%, respectively. MIC50% and MIC90% of imipenem and meropenem antibiotics were 32 ± 1 µg/mL and 64 ± 1 µg/mL, respectively (P < 0.9). However no resistance to glutaraldehyde was observed. Different bands of MDR strains were observed in the PCR product by electrophoresis. Conclusions It seems that besides the variety and prevalence of blaTEM and blaCTX, enormous mechanisms such as porin and leaking systems (efflux pumps) are responsible for the information of the A. baumannii resistance to disinfectants

  15. Business Process Management Theory and Applications

    CERN Document Server

    2013-01-01

    Business Process Management (BPM) has been in existence for decades. It  uses, complements, integrates and extends theories, methods and tools from  other scientific disciplines like: strategic management, information technology, managerial accounting, operations management etc. During this period the main focus themes of researchers and professionals in BPM  were: business process modeling, business process analysis, activity based costing, business process simulation, performance measurement, workflow management, the link between information technology and BPM for process automation etc. More recently the focus moved to subjects like Knowledge Management, Enterprise Resource Planning (ERP) Systems, Service Oriented Architectures (SOAs), Process Intelligence (PI) and even  Social Networks. In this collection of papers we present a review of the work and the outcomes achieved in the classic BPM fields as well as a deeper insight on recent advances in BPM. We present a review of business process modeling a...

  16. Specifying Processes: Application to Electrical Power Distribution

    Directory of Open Access Journals (Sweden)

    Sabah Al-Fedaghi

    2011-01-01

    Full Text Available Problem statement: This study deals with the problem of how to specify processes. Many process specification methodologies have been determined to be incomplete; for example, ISO 9000:2005 defines process as transforming media inputs into outputs. Nevertheless, the author of the Quality Systems Handbook, declares that such a definition is incomplete because processes create results and not necessarily by transforming inputs. Still, it is not clear what description of process can embed transformation of input to output or include creation that leads to results. Approach: This problem is important because process specification is an essential component in building projects utilized in such tasks as scheduling, planning, production, management, work flow and reengineering. Results: We solve the problem by “opening” the black box in the input-transformation-output model. This action uncovers many possible sources and destinations related to input and output, such as the disappearance, storage and copying of input. It is possible to reject input and also to block output from leaving the process. The approach is based on a conceptual framework for process specification of all generic phases that make up any process and embraces input, transformation, creation and output. The study applies the method in the field of electrical power distribution systems. Conclusion: We conclude that the results demonstrate a viable specification method that can be adopted for different types of processes.

  17. Institute of Plastics Processing and Application of Light Industry

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Institute of Plastics Processing and processing center sponsored by UNDP. University. Application of Light Industry was Since 1999, it has been attached set up in 1983, based on the plastics to Beijing Technology and Business

  18. Initial Assessment of the Molecular Epidemiology of blaNDM-1 in Colombia

    Science.gov (United States)

    Rojas, Laura J.; Wright, Meredith S.; De La Cadena, Elsa; Motoa, Gabriel; Hujer, Kristine M.; Villegas, Maria V.

    2016-01-01

    We report complete genome sequences of four blaNDM-1-harboring Gram-negative multidrug-resistant (MDR) isolates from Colombia. The blaNDM-1 genes were located on 193-kb Inc FIA, 178-kb Inc A/C2, and 47-kb (unknown Inc type) plasmids. Multilocus sequence typing (MLST) revealed that these isolates belong to sequence type 10 (ST10) (Escherichia coli), ST392 (Klebsiella pneumoniae), and ST322 and ST464 (Acinetobacter baumannii and Acinetobacter nosocomialis, respectively). Our analysis identified that the Inc A/C2 plasmid in E. coli contained a novel complex transposon (Tn125 and Tn5393 with three copies of blaNDM-1) and a recombination “hot spot” for the acquisition of new resistance determinants. PMID:27067339

  19. Multiplex real-time PCR assay for detection and classification of Klebsiella pneumoniae carbapenemase gene (bla KPC) variants.

    Science.gov (United States)

    Chen, Liang; Mediavilla, José R; Endimiani, Andrea; Rosenthal, Marnie E; Zhao, Yanan; Bonomo, Robert A; Kreiswirth, Barry N

    2011-02-01

    Carbapenem resistance mediated by plasmid-borne Klebsiella pneumoniae carbapenemases (KPC) is an emerging problem of significant clinical importance in Gram-negative bacteria. Multiple KPC gene variants (bla(KPC)) have been reported, with KPC-2 (bla(KPC-2)) and KPC-3 (bla(KPC-3)) associated with epidemic outbreaks in New York City and various international settings. Here, we describe the development of a multiplex real-time PCR assay using molecular beacons (MB-PCR) for rapid and accurate identification of bla(KPC) variants. The assay consists of six molecular beacons and two oligonucleotide primer pairs, allowing for detection and classification of all currently described bla(KPC) variants (bla(KPC-2) to bla(KPC-11)). The MB-PCR detection limit was 5 to 40 DNA copies per reaction and 4 CFU per reaction using laboratory-prepared samples. The MB-PCR probes were highly specific for each bla(KPC) variant, and cross-reactivity was not observed using DNA isolated from several bacterial species. A total of 457 clinical Gram-negative isolates were successfully characterized by our MB-PCR assay, with bla(KPC-3) and bla(KPC-2) identified as the most common types in the New York/New Jersey metropolitan region. The MB-PCR assay described herein is rapid, sensitive, and specific and should be useful for understanding the ongoing evolution of carbapenem resistance in Gram-negative bacteria. As novel bla(KPC) variants continue to emerge, the MB-PCR assay can be modified in response to epidemiologic developments.

  20. Gold process mineralogy: Objectives, techniques, and applications

    Science.gov (United States)

    Zhou, Joe Y.; Cabri, Louis J.

    2004-07-01

    The extractive metallurgy of gold is largely driven by mineralogical factors such as gold particle size; association with other minerals; coatings; presence of cyanicides, oxygen consumers, and preg-robbers; presence of refractory gold minerals; and locking of submicroscopic gold in sulfide and sulfarsenide mineral structures. Gold process mineralogy addresses all issues related to gold ore processing by the detailed study of an ore or a mill product. The methodology is widely used as a predictive tool in feasibility studies and during the process development stage, and as a trouble-shooting tool for mineral processing and hydrometallurgical operations.

  1. Crystal Structure of a Dimerized Cockroach Allergen Bla g 2 Complexed with a Monoclonal Antibody

    Energy Technology Data Exchange (ETDEWEB)

    Li, Mi; Gustchina, Alla; Alexandratos, Jerry; Wlodawer, Alexander; Wünschmann, Sabina; Kepley, Christopher L.; Chapman, Martin D.; Pomes, Anna (INDOOR Bio.); (VCU); (NIH)

    2008-09-03

    The crystal structure of a 1:1 complex between the German cockroach allergen Bla g 2 and the Fab' fragment of a monoclonal antibody 7C11 was solved at 2.8-{angstrom} resolution. Bla g 2 binds to the antibody through four loops that include residues 60-70, 83-86, 98-100, and 129-132. Cation-{pi} interactions exist between Lys-65, Arg-83, and Lys-132 in Bla g 2 and several tyrosines in 7C11. In the complex with Fab', Bla g 2 forms a dimer, which is stabilized by a quasi-four-helix bundle comprised of an {alpha}-helix and a helical turn from each allergen monomer, exhibiting a novel dimerization mode for an aspartic protease. A disulfide bridge between C51a and C113, unique to the aspartic protease family, connects the two helical elements within each Bla g 2 monomer, thus facilitating formation of the bundle. Mutation of these cysteines, as well as the residues Asn-52, Gln-110, and Ile-114, involved in hydrophobic interactions within the bundle, resulted in a protein that did not dimerize. The mutant proteins induced less {beta}-hexosaminidase release from mast cells than the wild-type Bla g 2, suggesting a functional role of dimerization in allergenicity. Because 7C11 shares a binding epitope with IgE, the information gained by analysis of the crystal structure of its complex provided guidance for site-directed mutagenesis of the allergen epitope. We have now identified key residues involved in IgE antibody binding; this information will be useful for the design of vaccines for immunotherapy.

  2. Clonal spread of blaOXA-72-carrying Acinetobacter baumannii sequence type 512 in Taiwan.

    Science.gov (United States)

    Kuo, Han-Yueh; Hsu, Po-Jui; Chen, Jiann-Yuan; Liao, Po-Cheng; Lu, Chia-Wei; Chen, Chang-Hua; Liou, Ming-Li

    2016-07-01

    This is the first report to show an insidious outbreak of armA- and blaOXA-72-carrying Acinetobacter baumannii sequence type 512 (ST512) at a study hospital in northern Taiwan. Multilocus sequence typing revealed that this was a ST512 clone. All of the isolates with ST512 carried a novel 12,056-bp repGR2 in combination with a repGR12-type plasmid. This plasmid, designated pAB-ML, had one copy of the blaOXA-72 gene that was flanked by XerC/XerD-like sites and conferred resistance to carbapenems.

  3. XML Determination of Phylogenetic Group and Prevalence of blaCTX-M and blaCTX-M-15 Genes in Escherichia Coli Isolates from Intestinal and Urinary Tract Infections in under Five- Year- Old Children

    Directory of Open Access Journals (Sweden)

    Momeni, F. (MSc

    2014-05-01

    Full Text Available Background and Objective: CTX-M type extended spectrum beta-lactamases is a rapidly expanding group of enzymes encountered with increasing fre‌quency, especially, in Escherichia coli (E. coli. There are a few reports on phylogenetic background of E. coli isolates from clinical sources of under five-year- old children in Iran. The purpose of this study was phylotyping of E. coli isolates having blaCTX-M and blaCTX-M-15 genes from under five-year- old children with diarrhea and urinary tract infection (UTI. Material and Methods: A total of 121 E. coli isolates (75 diarrheas and 46 UTI were obtained and identified as E. coli based on standard bacteriological tests. DNA was extracted from E. coli isolates by alkaline lysis method. PCR assay was used because of high frequency of blaCTX-M and blaCTX-M-15 genes in the isolates and also determination of phylogenetic group/subgroups by detection of yjaA and chuA genes and fragment TspE4.C2. Results: The isolates belonged to four phylogenetic groups A (48.77%, B1 (14.04%, B2 (11.57%, and D (25.62%. In the diarrheic isolates,17.37% were positive for blaCTX-M and 14.04% of isolates possessed both blaCTX-M and blaCTX-15genes.Out of 46 UTI isolates, 21.73% were positive for blaCTX-M and 15.21% for blaCTX-M and blaCTX-M-15 genes. Conclusion: A rather high prevalence of E. coli isolates with blaCTX-M and blaCTX-M-15 genes was observed in fewer than five-year- old children in Khoramabad city. Phylotyping of isolates possessing blaCTX-M and blaCTX-15genes showed that most of them belonge to A and D phylo-groups

  4. Non-O1/Non-O139 Vibrio cholerae Avian Isolate from France Cocarrying the bla(VIM-1) and bla(VIM-4) Genes.

    Science.gov (United States)

    Aberkane, Salim; Compain, Fabrice; Barraud, Olivier; Ouédraogo, Abdoul-Salam; Bouzinbi, Nicolas; Vittecoq, Marion; Jean-Pierre, Hélène; Decré, Dominique; Godreuil, Sylvain

    2015-10-01

    We describe here a non-O1/non-O139 Vibrio cholerae isolate producing both VIM-1 and VIM-4 carbapenemases. It was isolated from a yellow-legged gull in southern France. The blaVIM genes were part of a class 1 integron structure located in an IncA/C plasmid. This study emphasizes the presence of carbapenemase genes in wildlife microbiota.

  5. Application of pyrolysis process in processing of mixed food wastes

    Directory of Open Access Journals (Sweden)

    Grycová Barbora

    2016-03-01

    Full Text Available The food industry produces large amounts of solid and also liquid wastes. Different waste materials and their mixtures were pyrolysed in the laboratory pyrolysis unit to a final temperature of 800°C with a 10 minute delay at the final temperature. After the pyrolysis process of the selected wastes a mass balance of the resulting products, off-line analysis of the pyrolysis gas and evaluation of solid and liquid products were carried out. The highest concentration of methane, hydrogen and carbon monoxide were analyzed during the 4th gas sampling at a temperature of approx. 720–780°C. The concentration of hydrogen was measured in the range from 22 to 40 vol.%. The resulting iodine numbers of samples CHFO, DS, DSFW reach values that indicate the possibility of using them to produce the so-called “disposable sorbents” in wastewater treatment. The WC condensate can be directed to further processing and upgrading for energy use.

  6. Computer Applications in the Design Process.

    Science.gov (United States)

    Winchip, Susan

    Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

  7. Positive trigonometric polynomials and signal processing applications

    CERN Document Server

    Dumitrescu, Bogdan

    2007-01-01

    Presents the results on positive trigonometric polynomials within a unitary framework; the theoretical results obtained partly from the general theory of real polynomials, partly from self-sustained developments. This book provides information on the theory of sum-of-squares trigonometric polynomials in two parts: theory and applications.

  8. 7 CFR 1499.4 - Application process.

    Science.gov (United States)

    2010-01-01

    ...-424, which is a standard application for Federal assistance; (2) An introduction that contains the... specified in paragraph (d) of this section. (c) The introduction shall include: (1) An explanation of the... distributed without a disruptive impact upon production, prices and marketing of the same or like products...

  9. 45 CFR 12a.9 - Application process.

    Science.gov (United States)

    2010-10-01

    ... before the program becomes operational. (4) Ability to finance and operate the proposed program. The..., including local building code requirements. Any applicant which applies for a lease or permit for a... success in operating similar programs and recommendations attesting to that fact by Federal, State,...

  10. 24 CFR 581.9 - Application process.

    Science.gov (United States)

    2010-04-01

    ... before the program becomes operational. (4) Ability to finance and operate the proposed program. The..., including local building code requirements. Any applicant which applies for a lease or permit for a... success in operating similar programs and recommendations attesting to that fact by Federal, State,...

  11. 13 CFR 500.205 - Application process.

    Science.gov (United States)

    2010-01-01

    ... required date and time. Applications will not be accepted via facsimile machine transmission or electronic... Guarantee Loan”; (2) The information required for the completion of Form “Environmental Assessment and... year history and five year projection for revenue, cash flow, average realized prices and...

  12. 14 CFR 1300.16 - Application process.

    Science.gov (United States)

    2010-01-01

    ... transmission or electronic mail. No application will be accepted for review if it is not received by the Board... revenue, cash flow, average realized prices, and average realized operating costs and a demonstration that... preferred stock, or other appropriate equity instruments; and (13) Any other information requested by...

  13. 7 CFR 1720.6 - Application process.

    Science.gov (United States)

    2010-01-01

    ... statements of the guaranteed lender for the previous three years that have been audited by an independent certified public accountant, including any associated notes, as well as any interim financial statements and... pledged to assure the applicant's performance under, the guarantee agreement; (3) A statement by...

  14. 7 CFR 1709.210 - Application process.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE ASSISTANCE TO HIGH ENERGY COST COMMUNITIES Bulk Fuel Revolving Fund Grant Program § 1709.210... proposal and required elements. Each grant application must include a narrative proposal describing the project and addressing the following elements. The form, contents, and order of the narrative...

  15. Application of High Pressure in Food Processing

    OpenAIRE

    Herceg, Z; Režek Jambrak, A; Lelas, V.; Krešić, G.

    2011-01-01

    In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200) MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure proc...

  16. 12 CFR 926.5 - Housing associate application process.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Housing associate application process. 926.5 Section 926.5 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK MEMBERS AND HOUSING ASSOCIATES FEDERAL HOME LOAN BANK HOUSING ASSOCIATES § 926.5 Housing associate application process....

  17. Genetic characteristics of blaNDM-1-positive plasmid in Citrobacter freundii isolate separated from a clinical infectious patient.

    Science.gov (United States)

    Du, Xiao-Xing; Wang, Jian-Feng; Fu, Ying; Zhao, Feng; Chen, Yan; Wang, Hai-Ping; Yu, Yun-Song

    2013-09-01

    This study reports an infectious case involving an (NDM-1)-producing Citrobacter freundii and further explored the potential threat of the bla(NDM-1) gene by analysing the characteristics of the (NDM-1)-encoding plasmid sequence. A bla(NDM-1)-positive C. freundii with high resistance to carbapenems was separated from a clinical patient suffering from a urinary tract infection. S1 nuclease-based plasmid analysis followed by Southern blot hybridization, a conjugation experiment and electrotransformation confirmed that the bla(NDM-1) gene was located on a plasmid. High-throughput sequencing of the bla(NDM-1)-positive plasmid (pCFNDM-CN) showed that it was a 54 kb IncX-type plasmid and contained a backbone region and a variable region with two β-lactamase genes (bla(NDM-1) and bla(SHV-12)). The NDM-1 composite transposon in the variable region was surrounded by IS26 and IS5-truncated ISAba125, and shared a high sequence similarity to the bla(NDM-1) surrounding structure in Acinetobacter spp. Our research suggested that the NDM-1 composite transposon might play an essential role in mobilization of the bla(NDM-1) gene from Acinetobacter spp. to Enterobacteriaceae.

  18. Positive trigonometric polynomials and signal processing applications

    CERN Document Server

    Dumitrescu, Bogdan

    2017-01-01

    This revised edition is made up of two parts: theory and applications. Though many of the fundamental results are still valid and used, new and revised material is woven throughout the text. As with the original book, the theory of sum-of-squares trigonometric polynomials is presented unitarily based on the concept of Gram matrix (extended to Gram pair or Gram set). The programming environment has also evolved, and the books examples are changed accordingly. The applications section is organized as a collection of related problems that use systematically the theoretical results. All the problems are brought to a semi-definite programming form, ready to be solved with algorithms freely available, like those from the libraries SeDuMi, CVX and Pos3Poly. A new chapter discusses applications in super-resolution theory, where Bounded Real Lemma for trigonometric polynomials is an important tool. This revision is written to be more appealing and easier to use for new readers. < Features updated information on LMI...

  19. First Indian report of IncX3 plasmid carrying blaNDM-7 in Escherichia coli from bloodstream infection: potential for rapid dissemination.

    Science.gov (United States)

    Devanga Ragupathi, N K; Muthuirulandi Sethuvel, D P; Gajendiran, R; Daniel, J L K; Walia, K; Veeraraghavan, B

    2017-05-01

    Enterobacteriaceae with blaNDM-7 is only infrequently observed. Self-transmissible plasmids carrying the blaNDM gene increase the dissemination of carbapenem resistance in developing countries. This study investigates the whole genome sequence of a blaNDM-7-positive Escherichia coli. The isolate was an extended-spectrum β-lactamase producer by combined disc diffusion test and carbapenemase producer by CarbaNP method. Sequencing results revealed the isolate as E. coli ST-167 with IncX3 plasmid carrying blaNDM-7 in addition to blaTEM-1 and blaCMY-42 genes. The identification of IncX3-blaNDM-7 combination is the first report in India where blaNDM-7 is known to cause higher resistance to carbapenems compared to its variants.

  20. Clinical Application of "The Change Process".

    Science.gov (United States)

    Thompson, Mary L.

    A change process described in the work of Yochelson and Samenow was adapted to students committed as delinquents to a state correctional facility. Their criminal profile accurately described the majority of the offenders. While minor problems continued, their frequency was reduced by as much as nine times. Serious incidents occurred only after the…

  1. Computational Fluid Dynamics - Applications in Manufacturing Processes

    Science.gov (United States)

    Beninati, Maria Laura; Kathol, Austin; Ziemian, Constance

    2012-11-01

    A new Computational Fluid Dynamics (CFD) exercise has been developed for the undergraduate introductory fluid mechanics course at Bucknell University. The goal is to develop a computational exercise that students complete which links the manufacturing processes course and the concurrent fluid mechanics course in a way that reinforces the concepts in both. In general, CFD is used as a tool to increase student understanding of the fundamentals in a virtual world. A ``learning factory,'' which is currently in development at Bucknell seeks to use the laboratory as a means to link courses that previously seemed to have little correlation at first glance. A large part of the manufacturing processes course is a project using an injection molding machine. The flow of pressurized molten polyurethane into the mold cavity can also be an example of fluid motion (a jet of liquid hitting a plate) that is applied in manufacturing. The students will run a CFD process that captures this flow using their virtual mold created with a graphics package, such as SolidWorks. The laboratory structure is currently being implemented and analyzed as a part of the ``learning factory''. Lastly, a survey taken before and after the CFD exercise demonstrate a better understanding of both the CFD and manufacturing process.

  2. Genetic Structure Associated with blaOXA-18, Encoding a Clavulanic Acid-Inhibited Extended-Spectrum Oxacillinase▿

    Science.gov (United States)

    Naas, Thierry; Namdari, Fatemeh; Bogaerts, Pierre; Huang, Te-Din; Glupczynski, Youri; Nordmann, Patrice

    2008-01-01

    The genetic environment of the blaOXA-18 gene encoding a peculiar clavulanic acid-inhibitable Ambler class D extended-spectrum β-lactamase was determined from the prototype OXA-18-producing Pseudomonas aeruginosa MUS clinical isolate. An 8.2-kb genomic DNA fragment containing blaOXA-18 was cloned from P. aeruginosa MUS. Although most oxacillinases are located in integrons, blaOXA-18 lacked gene cassette-specific features. It was bracketed by two duplicated sequences containing ISCR19, a novel insertion sequence of the ISCR family of mobile elements; ΔintI1, a truncated integrase gene; and a truncated Δaac6′-Ib gene cassette. It is likely that ISCR19 was at the origin of the blaOXA-18 gene mobilization by a rolling-circle transposition event followed by homologous recombination. Furthermore, analysis of the cloned genomic DNA fragment revealed the presence of the integron-containing blaOXA-20 gene. Concomitantly, three P. aeruginosa clinical isolates, displaying a synergy image as determined by double-disk diffusion tests on cloxacillin-containing plates, were isolated from three patients hospitalized in different wards over a 9-month period at the Saint-Luc University hospital (Brussels, Belgium). These isolates were positive by PCR for blaOXA-18 and blaOXA-20 genes, genetically related to P. aeruginosa MUS as determined by pulsed-field gel electrophoresis, and carried the same blaOXA-18/blaOXA-20-associated genetic structures. This report characterized the genetic elements likely at the origin of blaOXA-18 gene mobilization in P. aeruginosa and suggests the spread of oxacillin-type extended-spectrum β-lactamases in P. aeruginosa at the Saint-Luc University hospital of Brussels, Belgium. PMID:18663027

  3. Correlation of phenotypic tests with the presence of the blaZ gene for detection of beta-lactamase

    Directory of Open Access Journals (Sweden)

    Adriano Martison Ferreira

    Full Text Available Abstract Staphylococcus aureus and Staphylococcus saprophyticus are the most common and most important staphylococcal species associated with urinary tract infections. The objective of the present study was to compare and to evaluate the accuracy of four phenotypic methods for the detection of beta-lactamase production in Staphylococcus spp. Seventy-three strains produced a halo with a diameter ≤28 mm (penicillin resistant and all of them were positive for the blaZ gene. Among the 28 susceptible strain (halo ≥29 mm, 23 carried the blaZ gene and five did not. The zone edge test was the most sensitive (90.3%, followed by MIC determination (85.5%, but the specificity of the former was low (40.0%. The nitrocefin test was the least sensitive (28.9%. However, the nitrocefin test together with the disk diffusion method showed the highest specificity (100%. The present results demonstrated that the zone edge test was the most sensitive phenotypic test for detection of beta-lactamase, although it is still not an ideal test to detect this type of resistance since its specificity was low. However, the inhibition halo diameter of the penicillin disk can be used together with the zone edge test since the same disk is employed in the two tests. Combined analysis of the two tests shows a sensitivity of 90.3% and specificity of 100%, proving better sensitivity, especially for S. saprophyticus. This is a low-cost test of easy application and interpretation that can be used in small and medium-sized laboratories where susceptibility testing is usually performed by the disk diffusion method.

  4. Correlation of phenotypic tests with the presence of the blaZ gene for detection of beta-lactamase.

    Science.gov (United States)

    Ferreira, Adriano Martison; Martins, Katheryne Benini; Silva, Vanessa Rocha da; Mondelli, Alessandro Lia; Cunha, Maria de Lourdes Ribeiro de Souza da

    Staphylococcus aureus and Staphylococcus saprophyticus are the most common and most important staphylococcal species associated with urinary tract infections. The objective of the present study was to compare and to evaluate the accuracy of four phenotypic methods for the detection of beta-lactamase production in Staphylococcus spp. Seventy-three strains produced a halo with a diameter ≤28mm (penicillin resistant) and all of them were positive for the blaZ gene. Among the 28 susceptible strain (halo ≥29mm), 23 carried the blaZ gene and five did not. The zone edge test was the most sensitive (90.3%), followed by MIC determination (85.5%), but the specificity of the former was low (40.0%). The nitrocefin test was the least sensitive (28.9%). However, the nitrocefin test together with the disk diffusion method showed the highest specificity (100%). The present results demonstrated that the zone edge test was the most sensitive phenotypic test for detection of beta-lactamase, although it is still not an ideal test to detect this type of resistance since its specificity was low. However, the inhibition halo diameter of the penicillin disk can be used together with the zone edge test since the same disk is employed in the two tests. Combined analysis of the two tests shows a sensitivity of 90.3% and specificity of 100%, proving better sensitivity, especially for S. saprophyticus. This is a low-cost test of easy application and interpretation that can be used in small and medium-sized laboratories where susceptibility testing is usually performed by the disk diffusion method.

  5. blaKPC RNA Expression Correlates with Two Transcriptional Start Sites but Not Always with Gene Copy Number in Four Genera of Gram-Negative Pathogens▿

    OpenAIRE

    Roth, Amanda L.; Kurpiel, Philip M.; Lister, Philip D.; Hanson, Nancy D.

    2011-01-01

    Klebsiella pneumoniae carbapenemase (KPC)-producing organisms are therapeutically and diagnostically challenging. It is possible that blaKPC gene expression plays a role in the variability observed in clinical susceptibility testing. blaKPC transformants together with 10 clinical isolates representing four genera were evaluated for blaKPC copy number and gene expression and correlated with β-lactam MIC data. The data suggest that mechanisms other than gene copy number and expression of blaKPC...

  6. First report of the blaVIM gene in environmental isolates of Buttiauxella sp.

    Science.gov (United States)

    Pitondo-Silva, André; Martins, Vinicius Vicente; Stehling, Eliana Guedes

    2015-04-01

    Several works have demonstrated the presence of metallo-β-lactamases (MBLs) in clinical bacteria. However, in environmental isolates, few works have reported on these enzymes. In this study, we report for the first time two environmental isolates of Buttiauxella sp. recovered from chrysanthemum plantations in Brazil containing blaVIM gene and producing MBLs.

  7. Identification of bla KPC-2 on different plasmids of three Morganella morganii isolates.

    Science.gov (United States)

    Shi, D-S; Wang, W-P; Kuai, S-G; Shao, H-F; Huang, M

    2012-05-01

    Three Morganella morganii strains resistant to carbapenems were recovered from the surgical intensive care unit (SICU) in our hospital. Carbapenemases and extended-spectrum β-lactamases (ESBLs) were respectively detected by the modified Hodge test and the modified Clinical and Laboratory Standards Institute (CLSI) ESBL confirmatory test in all isolates. Amplification of whole-cell and plasmid DNAs extracted from isolates with primers specific for the bla (KPC) produced an amplicon confirmed to be bla (KPC-2) by sequence analysis. Pulsed-field gel electrophoresis (PFGE) typing revealed that three isolates belonged to two closely related types. Plasmids electrophoresis and restriction analysis revealed that the bla (KPC-2) was located on different plasmids. The transfer of carbapenem resistance from the three original isolates to Escherichia coli EC600 was successful by conjugation. An examination of the outer membrane proteins showed a lack of a 38-kDa outer membrane protein (OMP) compared with M. morganii susceptible to carbapenems. The production of KPC-2 and ESBLs, combined with OMP deficiency, resulted in high-level carbapenem resistance in the M. morganii strains. The genetic environment around bla (KPC-2) analysis revealed that this β-lactamase was located on the same mobile genetic elements which could transfer between different plasmids.

  8. Diversity and evolution of blaZ from Staphylococcus aureus and coagulase-negative staphylococci

    DEFF Research Database (Denmark)

    Olsen, John E.; Christensen, Henrik; Aarestrup, Frank Møller

    2006-01-01

    NS) and Staphylococcus aureus of bovine origin. Methods: blaZ was detected in 143 strains of penicillin-resistant S. aureus and CoNS from five Danish cattle herds (n = 25/23), random CoNS isolates from Denmark (n = 37), a collection of S. aureus from six different countries (n = 52), humans in Denmark (n = 3) and beta...... and sequences retrieved from public databases were compared. A phylogenetic tree showed that blaZ exists in three evolutionary lines: one group was of plasmid origin, one group was of chromosomal origin and one intermediate group. Sixty-nine sequence types were demonstrated. They translated into 11 BlaZ protein...... types. The major types all contained strains of both human and bovine origin, and more than one Staphylococcus species, demonstrating a shared gene pool. In a comparison of S. aureus and CoNS obtained from five Danish cattle herds, the same type of blaZ was only detected in one case. Conclusions...

  9. Signal and image processing in medical applications

    CERN Document Server

    Kumar, Amit; Rahim, B Abdul; Kumar, D Sravan

    2016-01-01

    This book highlights recent findings on and analyses conducted on signals and images in the area of medicine. The experimental investigations involve a variety of signals and images and their methodologies range from very basic to sophisticated methods. The book explains how signal and image processing methods can be used to detect and forecast abnormalities in an easy-to-follow manner, offering a valuable resource for researchers, engineers, physicians and bioinformatics researchers alike.

  10. Applications of Friction Stir Processing during Engraving of Soft Materials

    Directory of Open Access Journals (Sweden)

    V. Kočović

    2015-12-01

    Full Text Available Friction stir processing has extensive application in many technological operations. Application area of friction stir processing can be extended to the processing of non-metallic materials, such as wood. The paper examines the friction stir processing contact between a specially designed hard and temperature-resistant rotating tool and workpiece which is made of wood. Interval of speed slip and temperature level under which the combustion occurs and carbonization layer of soft material was determined. The results of the research can be applied in technological process of wood engraving operations which may have significant technological and aesthetic effects.

  11. Metrology Sampling Strategies for Process Monitoring Applications

    KAUST Repository

    Vincent, Tyrone L.

    2011-11-01

    Shrinking process windows in very large scale integration semiconductor manufacturing have already necessitated the development of control systems capable of addressing sub-lot-level variation. Within-wafer control is the next milestone in the evolution of advanced process control from lot-based and wafer-based control. In order to adequately comprehend and control within-wafer spatial variation, inline measurements must be performed at multiple locations across the wafer. At the same time, economic pressures prompt a reduction in metrology, for both capital and cycle-time reasons. This paper explores the use of modeling and minimum-variance prediction as a method to select the sites for measurement on each wafer. The models are developed using the standard statistical tools of principle component analysis and canonical correlation analysis. The proposed selection method is validated using real manufacturing data, and results indicate that it is possible to significantly reduce the number of measurements with little loss in the information obtained for the process control systems. © 2011 IEEE.

  12. Application to the radiation processing of polymer

    Energy Technology Data Exchange (ETDEWEB)

    Yoshii, Fumio [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2003-02-01

    Polypropylene (PP) and biodegradable polymer (blend of poly ({epsilon}-caploracton) 30/polybutylenesuccynate 70), PHB02 were irradiated with an electron beam to improve processability for production of thin film and foam. The processability of the polymer was improved due to enhancement of melt strength with irradiation at the dose range between 10 and 100 kGy. Increase of melt strength is due to entanglement of branch structure formed by irradiation. Possibility of high-speed production of thin film and production of foam have been achieved by this process. The soil degradation test showed that biodegradable polymer film buried in the soil was almost entirely degraded (97%) after two months and completely degraded after two and a half months. In the case of foam samples, 65% degradation was achieved after four months. Radiation crosslinked water-soluble polymer form hydrogel, which absorb much water. The hydrogel prepared by irradiation of polymer in aqueous solution was applied as dressing for healing of wound. In order to evaluate the healing effect of the polyethylene oxide (PEO) hydrogel dressing, wounds formed on the back of marmots were covered by the hydrogel. The healing under the wet environment of the hydrogel dressing had three advantages, compared with that of gauze dressing, which gives a dry environment: (1) enhancement of healing rate, (2) facilitation for changing the dressing, i.e. the hydrogel can be peeled off without any damage to the regenerated skin surface, and (3) hydrogel dressing material does not remain stuck on the wound. (author)

  13. Application of simulation models for the optimization of business processes

    Science.gov (United States)

    Jašek, Roman; Sedláček, Michal; Chramcov, Bronislav; Dvořák, Jiří

    2016-06-01

    The paper deals with the applications of modeling and simulation tools in the optimization of business processes, especially in solving an optimization of signal flow in security company. As a modeling tool was selected Simul8 software that is used to process modeling based on discrete event simulation and which enables the creation of a visual model of production and distribution processes.

  14. Spacetime Processing Metasurfaces: GSTC Synthesis and Prospective Applications

    CERN Document Server

    Chamanara, Nima; Achouri, Karim; Caloz, Christophe

    2016-01-01

    The paper presents the general concept of spacetime processing metasurfaces, synthesized by generalized sheet transition conditions (GSTCs). It is shown that such metasurfaces can perform multiple simultaneous spatio-temporal processing transformations on incident electromagnetic waves. A time-reversal space-generalized-refraction metasurface and a multi-time-space-differentiating metasurfaces are presented as applications of the general spacetime processing metasurface concept.

  15. Processing silk hydrogel and its applications in biomedical materials.

    Science.gov (United States)

    Wang, Hai-Yan; Zhang, Yu-Qing

    2015-01-01

    This review mainly introduces the types of silk hydrogels, their processing methods, and applications. There are various methods for hydrogel preparation, and many new processes are being developed for various applications. Silk hydrogels can be used in cartilage tissue engineering, drug release materials, 3D scaffolds for cells, and artificial skin, among other applications because of their porous structure and high porosity and the large surface area for growth, migration, adhesion and proliferation of cells that the hydrogels provide. All of these advantages have made silk hydrogels increasingly attractive. In addition, silk hydrogels have wide prospects for application in the field of biomedical materials.

  16. The Delphi process: a solution for reviewing novel grant applications

    Directory of Open Access Journals (Sweden)

    Cath Holliday

    2010-08-01

    Full Text Available Cath Holliday1, Monica Robotin1,21Cancer Council New South Wales, Sydney; 2University of Sydney, School of Public Health, Sydney, New South Wales, AustraliaIntroduction: Traditional scientific review processes are not well suited for evaluating the merits of research in situations where the available scientific evidence is limited and if review panels have widely divergent opinions. This study tested whether a Delphi process is useful in grant selection.Materials and method: A Delphi process prioritized novel research proposals in pancreatic cancer. Five reviewers holding similar grants overseas ranked research applications by scientific merit, innovativeness, and level of risk.Result: Three rounds of voting evaluated the best 10 applications received. In the first round of the Delphi process, scores ranged from 5.0 to 8.3. After the second round, the cumulative scores of the eight remaining applications ranged from 10 to 12.6. At the end of the third round, the final cumulative scores of the remaining six applications ranged from 13.6 to 18.2. The four highest ranking applications were recommended for funding, with agreement from reviewers.Conclusion: A modified Delphi process proved to be an efficient, transparent, and equitable method of reviewing novel grant applications in a specialized field of research, where no local expertise was available. This process may also be useful for other peer review processes, particularly where there is limited access to local experts.Keywords: delphi process, research grant selection, consensus

  17. Genetic structures at the origin of acquisition of the beta-lactamase bla KPC gene.

    Science.gov (United States)

    Naas, Thierry; Cuzon, Gaelle; Villegas, Maria-Virginia; Lartigue, Marie-Frédérique; Quinn, John P; Nordmann, Patrice

    2008-04-01

    Genetic structures surrounding the carbapenem-hydrolyzing Ambler class A bla KPC gene were characterized in several KPC-positive Klebsiella pneumoniae and Pseudomonas aeruginosa strains isolated from the United States, Colombia, and Greece. The bla KPC genes were associated in all cases with transposon-related structures. In the K. pneumoniae YC isolate from the United States, the beta-lactamase bla KPC-2 gene was located on a novel Tn3-based transposon, Tn4401. Tn4401 was 10 kb in size, was delimited by two 39-bp imperfect inverted repeat sequences, and harbored, in addition to the beta-lactamase bla KPC-2 gene, a transposase gene, a resolvase gene, and two novel insertion sequences, ISKpn6 and ISKpn7. Tn4401 has been identified in all isolates. However, two isoforms of this transposon were found: Tn4401a was found in K. pneumoniae YC and K. pneumoniae GR from the United States and Greece, respectively, and differed by a 100-bp deletion, located just upstream of the bla KPC-2 gene, compared to the sequence of Tn4401b, which was found in the Colombian isolates. In all isolates tested, Tn4401 was flanked by a 5-bp target site duplication, the signature of a recent transposition event, and was inserted in different open reading frames located on plasmids that varied in size and nature. Tn4401 is likely at the origin of carbapenem-hydrolyzing beta-lactamase KPC mobilization to plasmids and its further insertion into various-sized plasmids identified in nonclonally related K. pneumoniae and P. aeruginosa isolates.

  18. Food gels: gelling process and new applications.

    Science.gov (United States)

    Banerjee, Soumya; Bhattacharya, Suvendu

    2012-01-01

    Food gels are viscoelastic substances and several gelled products are manufactured throughout the world. The gelling agents in foods are usually polysaccharides and proteins. In food gels, the polymer molecules are not cross-linked by covalent bonds with the exception of disulphide bonds in some protein gels. Instead, the molecules are held together by a combination of weak inter-molecular forces like hydrogen bonds, electrostatic forces, Van der Waals forces, and hydrophobic interactions. Polysaccharides including hydrocolloids are strongly hydrated in aqueous medium but they tend to have less ordered structures. The mechanism of gelation depends on the nature of the gelling agent(s) and on the conditions of gel formation like the temperature, the presence of ions, the pH, and the concentration of gelling agents, etc. Characterization of gels can be performed in several ways of which rheological measurements are frequently practiced. Multi-component or mixed gel system is an important area of interest in which two or more gelling components are simultaneously used to achieve certain specific structural and functional characteristics. We here discuss about the different gels and gelling agents, the characterization of gels, and the mechanism of gelation with an emphasis on mixed or multi-component gels that would have significant commercial applications.

  19. Applications of the anaerobic digestion process

    DEFF Research Database (Denmark)

    Angelidaki, Irini; Ellegaard, L.; Ahring, Birgitte Kiær

    2003-01-01

    and incineration of organic waste has become less desirable, and legislation, both in Europe and elsewhere, tends to favor biological treatment as a way of recycling minerals and nutrients of organic wastes from society back to the food production and supply chain. Removing the relatively wet organic waste from......At the start of the new millennium waste management has become a political priority in many countries. One of the main problems today is to cope with an increasing amount of primary waste in an environmentally acceptable way. Biowastes, i.e., municipal, agricultural or industrial organic waste...... and resource/energy recovery have been developed. Treatment of biowastes by anaerobic digestion processes is in many cases the optimal way to convert organic waste into useful products such as energy (in the form of biogas) and a fertilizer product. Other waste management options, such as land filling...

  20. Aerial thermography in archaeological prospection: Applications & processing

    Science.gov (United States)

    Cool, Autumn Chrysantha

    Aerial thermography is one of the least utilized archaeological prospection methods, yet it has great potential for detecting anthropogenic anomalies. Thermal infrared radiation is absorbed and reemitted at varying rates by all objects on and within the ground depending upon their density, composition, and moisture content. If an area containing archaeological features is recorded at the moment when their thermal signatures most strongly contrast with that of the surrounding matrix, they can be visually identified in thermal images. Research conducted in the 1960s and 1970s established a few basic rules for conducting thermal survey, but the expense associated with the method deterred most archaeologists from using this technology. Subsequent research was infrequent and almost exclusively appeared in the form of case studies. However, as the current proliferation of unmanned aerial vehicles (UAVs) and compact thermal cameras draws renewed attention to aerial thermography as an attractive and exciting form of survey, it is appropriate and necessary to reevaluate our approach. In this thesis I have taken a two-pronged approach. First, I built upon the groundwork of earlier researchers and created an experiment to explore the impact that different environmental and climatic conditions have on the success or failure of thermal imaging. I constructed a test site designed to mimic a range of archaeological features and imaged it under a variety of conditions to compare and contrast the results. Second, I explored a new method for processing thermal data that I hope will lead to a means of reducing noise and increasing the clarity of thermal images. This step was done as part of a case study so that the effectiveness of the processing method could be evaluated by comparison with the results of other geophysical surveys.

  1. Applications of sonochemistry in Russian food processing industry.

    Science.gov (United States)

    Krasulya, Olga; Shestakov, Sergey; Bogush, Vladimir; Potoroko, Irina; Cherepanov, Pavel; Krasulya, Boris

    2014-11-01

    In food industry, conventional methodologies such as grinding, mixing, and heat treatment are used for food processing and preservation. These processes have been well studied for many centuries and used in the conversion of raw food materials to consumable food products. This report is dedicated to the application of a cost-efficient method of energy transfer caused by acoustic cavitation effects in food processing, overall, having significant impacts on the development of relatively new area of food processing such as food sonochemistry.

  2. Applications of Digital Image Processing 11

    Science.gov (United States)

    Cho, Y. -C.

    1988-01-01

    A new technique, digital image velocimetry, is proposed for the measurement of instantaneous velocity fields of time dependent flows. A time sequence of single-exposure images of seed particles are captured with a high-speed camera, and a finite number of the single-exposure images are sampled within a prescribed period in time. The sampled images are then digitized on an image processor, enhanced, and superimposed to construct an image which is equivalent to a multiple exposure image used in both laser speckle velocimetry and particle image velocimetry. The superimposed image and a single-exposure Image are digitally Fourier transformed for extraction of information on the velocity field. A great enhancement of the dynamic range of the velocity measurement is accomplished through the new technique by manipulating the Fourier transform of both the single-exposure image and the superimposed image. Also the direction of the velocity vector is unequivocally determined. With the use of a high-speed video camera, the whole process from image acquisition to velocity determination can be carried out electronically; thus this technique can be developed into a real-time capability.

  3. Sequential specification of time-aware stream processing applications

    NARCIS (Netherlands)

    Geuns, Stefan J.; Hausmans, Joost P.H.M.; Bekooij, Marco J.G.

    2013-01-01

    Automatic parallelization of Nested Loop Programs (NLPs) is an attractive method to create embedded real-time stream processing applications for multi-core systems. However, the description and parallelization of applications with a time dependent functional behavior has not been considered in NLPs.

  4. Plan for advanced microelectronics processing technology application

    Energy Technology Data Exchange (ETDEWEB)

    Goland, A.N.

    1990-10-01

    The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.

  5. Hydrolysis of Clavulanate by Mycobacterium tuberculosis β-Lactamase BlaC Harboring a Canonical SDN Motif

    Science.gov (United States)

    Soroka, Daria; Li de la Sierra-Gallay, Inès; Dubée, Vincent; Triboulet, Sébastien; van Tilbeurgh, Herman; Compain, Fabrice; Ballell, Lluis; Barros, David; Mainardi, Jean-Luc

    2015-01-01

    Combinations of β-lactams with clavulanate are currently being investigated for tuberculosis treatment. Since Mycobacterium tuberculosis produces a broad spectrum β-lactamase, BlaC, the success of this approach could be compromised by the emergence of clavulanate-resistant variants, as observed for inhibitor-resistant TEM variants in enterobacteria. Previous analyses based on site-directed mutagenesis of BlaC have led to the conclusion that this risk was limited. Here, we used a different approach based on determination of the crystal structure of β-lactamase BlaMAb of Mycobacterium abscessus, which efficiently hydrolyzes clavulanate. Comparison of BlaMAb and BlaC allowed for structure-assisted site-directed mutagenesis of BlaC and identification of the G132N substitution that was sufficient to switch the interaction of BlaC with clavulanate from irreversible inactivation to efficient hydrolysis. The substitution, which restored the canonical SDN motif (SDG→SDN), allowed for efficient hydrolysis of clavulanate, with a more than 104-fold increase in kcat (0.41 s−1), without affecting the hydrolysis of other β-lactams. Mass spectrometry revealed that acylation of BlaC and of its G132N variant by clavulanate follows similar paths, involving sequential formation of two acylenzymes. Decarboxylation of the first acylenzyme results in a stable secondary acylenzyme in BlaC, whereas hydrolysis occurs in the G132N variant. The SDN/SDG polymorphism defines two mycobacterial lineages comprising rapidly and slowly growing species, respectively. Together, these results suggest that the efficacy of β-lactam–clavulanate combinations may be limited by the emergence of resistance. β-Lactams active without clavulanate, such as faropenem, should be prioritized for the development of new therapies. PMID:26149997

  6. Mechanisms Involved in Acquisition of blaNDM Genes by IncA/C2 and IncFIIY Plasmids.

    Science.gov (United States)

    Wailan, Alexander M; Sidjabat, Hanna E; Yam, Wan Keat; Alikhan, Nabil-Fareed; Petty, Nicola K; Sartor, Anna L; Williamson, Deborah A; Forde, Brian M; Schembri, Mark A; Beatson, Scott A; Paterson, David L; Walsh, Timothy R; Partridge, Sally R

    2016-07-01

    blaNDM genes confer carbapenem resistance and have been identified on transferable plasmids belonging to different incompatibility (Inc) groups. Here we present the complete sequences of four plasmids carrying a blaNDM gene, pKP1-NDM-1, pEC2-NDM-3, pECL3-NDM-1, and pEC4-NDM-6, from four clinical samples originating from four different patients. Different plasmids carry segments that align to different parts of the blaNDM region found on Acinetobacter plasmids. pKP1-NDM-1 and pEC2-NDM-3, from Klebsiella pneumoniae and Escherichia coli, respectively, were identified as type 1 IncA/C2 plasmids with almost identical backbones. Different regions carrying blaNDM are inserted in different locations in the antibiotic resistance island known as ARI-A, and ISCR1 may have been involved in the acquisition of blaNDM-3 by pEC2-NDM-3. pECL3-NDM-1 and pEC4-NDM-6, from Enterobacter cloacae and E. coli, respectively, have similar IncFIIY backbones, but different regions carrying blaNDM are found in different locations. Tn3-derived inverted-repeat transposable elements (TIME) appear to have been involved in the acquisition of blaNDM-6 by pEC4-NDM-6 and the rmtC 16S rRNA methylase gene by IncFIIY plasmids. Characterization of these plasmids further demonstrates that even very closely related plasmids may have acquired blaNDM genes by different mechanisms. These findings also illustrate the complex relationships between antimicrobial resistance genes, transposable elements, and plasmids and provide insights into the possible routes for transmission of blaNDM genes among species of the Enterobacteriaceae family.

  7. High prevalence of blaCTX-M group genes in Aeromonas dhakensis isolated from aquaculture fish species in South Korea.

    Science.gov (United States)

    Yi, Seung-Won; Chung, Tae-Ho; Joh, Seong-Joon; Park, Chul; Park, Byoung-Yong; Shin, Gee-Wook

    2014-12-01

    The prevalence of resistant genes against β-lactams in 119 Aeromonas strains was determined. A large number (99.2%) of the present fish strains were resistant to one or more β- lactams including ceftiofur, amoxicillin-clavulanic acid, ampicillin, piperacillin and cefpodoxime. Among antibiotic resistance phenotypes, the simultaneous resistance to all β-lactams occurred in 25.2% (n=30) of all strains, which consisted of 18 strains of A. dhakensis, 8 strains of A. caviae, 2 strains of A. hydrophila and only one strain of A. veronii. For exploring genetic background of the antibiotic resistances, multiple PCR assays were subjected to detect β-lactamase-encoding genes, bla(TEM), bla(OXA-B) and bla(CTX-M). In the results, the bla(TEM-1) gene was harbored in all strains, whereas only 3 strains harbored bla(OXA) gene. In the case of bla(CTX-M) gene, the gene was detected in 21.0% (25 out of 119) of all strains, which countered with 80% (20 out of 25) of A. dhakensis, 8% (2 out of 25) of A. caviae and 12% (3 out of 25) of A. hydrophila. In addition, most of the bla(CTX-M) positive strains showed simultaneous resistance to all β-lactams (18 out of 30 strains). In sequence analysis for bla(CTX-M) genes detected, they were CTX-M group 1-encoding genes including bla(CTX-M-33) from 3 eel strains of A. dhakensis. Therefore, A. dhakensis obtained from cultured fish could represent a reservoir for spreading genes encoding CTX-M group 1 enzymes and hence should be carefully monitored, especially for its potential risk to public health.

  8. Functional Characterization of Tn4401, a Tn3-Based Transposon Involved in blaKPC Gene Mobilization

    OpenAIRE

    G Cuzon; Naas, T; Nordmann, P

    2011-01-01

    The carbapenemase gene blaKPC, which is rapidly spreading worldwide, is located on a Tn3-based transposon, Tn4401. In a transposition-conjugation assay, Tn4401 was able to mobilize blaKPC-2 gene at a frequency of 4.4 × 10−6/recipient cell. A 5-bp target site duplication was evidenced upon each insertion without target site specificity. This study demonstrated that Tn4401 is an active transposon capable of mobilizing blaKPC genes at high frequency.

  9. Multiplex Real-Time PCR Assay for Detection and Classification of Klebsiella pneumoniae Carbapenemase Gene (blaKPC) Variants▿

    OpenAIRE

    Chen, Liang; Mediavilla, José R.; Endimiani, Andrea; Rosenthal, Marnie E.; Zhao, Yanan; Robert A Bonomo; Kreiswirth, Barry N.

    2011-01-01

    Carbapenem resistance mediated by plasmid-borne Klebsiella pneumoniae carbapenemases (KPC) is an emerging problem of significant clinical importance in Gram-negative bacteria. Multiple KPC gene variants (blaKPC) have been reported, with KPC-2 (blaKPC-2) and KPC-3 (blaKPC-3) associated with epidemic outbreaks in New York City and various international settings. Here, we describe the development of a multiplex real-time PCR assay using molecular beacons (MB-PCR) for rapid and accurate identific...

  10. Thermal storage technologies for solar industrial process heat applications

    Science.gov (United States)

    Gordon, L. H.

    1979-01-01

    The state-of-the-art of thermal storage subsystems for the intermediate and high temperature (100 C to 600 C) solar industrial process heat generation is presented. Primary emphasis is focused on buffering and diurnal storage as well as total energy transport. In addition, advanced thermal storage concepts which appear promising for future solar industrial process heat applications are discussed.

  11. Wideband impedance spectrum analyzer for process automation applications

    Science.gov (United States)

    Doerner, Steffen; Schneider, Thomas; Hauptmann, Peter R.

    2007-10-01

    For decades impedance spectroscopy is used in technical laboratories and research departments to investigate effects or material characteristics that affect the impedance spectrum of the sensor. Establishing this analytical approach for process automation and stand-alone applications will deliver additional and valuable information beside traditional measurement techniques such as the measurement of temperature, flow rate, and conductivity, among others. As yet, most of the current impedance analysis methods are suited for laboratory applications only since they involve stand-alone network analyzers that are slow, expensive, large, or immobile. Furthermore, those systems offer a large range of functionality that is not being used in process control and other fields of application. We developed a sensor interface based on high speed direct digital signal processing offering wideband impedance spectrum analysis with high resolution for frequency adjustment, excellent noise rejection, very high measurement rate, and convenient data exchange to common interfaces. The electronics has been implemented on two small circuit boards and it is well suited for process control applications such as monitoring phase transitions, characterization of fluidal systems, and control of biological processes. The impedance spectrum analyzer can be customized easily for different measurement applications by adapting the appropriate sensor module. It has been tested for industrial applications, e.g., dielectric spectroscopy and high temperature gas analysis.

  12. Applications of Fuzzy Logic in Image Processing – A Brief

    Directory of Open Access Journals (Sweden)

    Mahesh Prasanna K

    2015-10-01

    Full Text Available  The subject of this study is to show the application of fuzzy logic in image processing with a brief introduction to fuzzy logic and digital image processing. Digital image processing is an ever expanding and dynamic area with applications reaching out into our everyday life such as medicine, space exploration, surveillance, authentication, automated industry inspection and many more areas. Fuzzy logic, one of the decision-making techniques of artificial intelligence, has many application areas. Although it has been subjected to criticisms since its birth, especially in recent years, fuzzy logic has been proven to be applicable in almost all scientific fields. This shows that the concept of fuzzy logic will maintain its validity and the number of fields where it draws attention will increase further.

  13. Process Planning Support System for Green Manufacturing and its application

    Institute of Scientific and Technical Information of China (English)

    HE Yan; LIU Fei; CAO Huajun; ZHANG Hua

    2007-01-01

    Owing to a lack of practical methods and soft- ware tools in the existing researches on green manufacturing (GM), process planning support system for green manufac- turing (GMPPSS) was developed to deal with the problems in optimization of environment-benign process planning. The GMPPSS consisted mainly of three function modules and related model repositories including: selection of process elements, optimization of process courses, and evaluation of process projects for GM. The database of the GMPPSS was used to provide plentiful information on resources consump- tion and environmental impact in manufacturing processes, which consisted of process attribute database, inventory database, machine database, tool database, and the cutting fluid database. Raw materials, secondary material consump- tion, energy consumption, and environment impacts of pro- cess planning were optimized to improve the green attribute of process planning of parts with the supports of the data- bases and model repositories. The gear processing in the machining tool factory was presented to verify the system's applicability.

  14. Real-time digital signal processing fundamentals, implementations and applications

    CERN Document Server

    Kuo, Sen M; Tian, Wenshun

    2013-01-01

    Combines both the DSP principles and real-time implementations and applications, and now updated with the new eZdsp USB Stick, which is very low cost, portable and widely employed at many DSP labs. Real-Time Digital Signal Processing introduces fundamental digital signal processing (DSP) principles and will be updated to include the latest DSP applications, introduce new software development tools and adjust the software design process to reflect the latest advances in the field. In the 3rd edition of the book, the key aspect of hands-on experiments will be enhanced to make the DSP principle

  15. Introduction to probability and stochastic processes with applications

    CERN Document Server

    Castañ, Blanco; Arunachalam, Viswanathan; Dharmaraja, Selvamuthu

    2012-01-01

    An easily accessible, real-world approach to probability and stochastic processes Introduction to Probability and Stochastic Processes with Applications presents a clear, easy-to-understand treatment of probability and stochastic processes, providing readers with a solid foundation they can build upon throughout their careers. With an emphasis on applications in engineering, applied sciences, business and finance, statistics, mathematics, and operations research, the book features numerous real-world examples that illustrate how random phenomena occur in nature and how to use probabilistic t

  16. Symmetric Rearrangements Around Infinity with Applications to Levy Processes

    CERN Document Server

    Drewitz, Alexander; Sun, Rongfeng

    2011-01-01

    We prove a new rearrangement inequality for multiple integrals, which partly generalizes a result of Friedberg and Luttinger (1976) and can be interpreted as involving symmetric rearrangements of domains around infinity. As applications, we prove two comparison results for general Levy processes and their symmetric rearrangements. The first application concerns the survival probability of a point particle in a Poisson field of moving traps following independent Levy motions. We show that the survival probability can only increase if the point particle does not move, and the traps and the Levy motions are symmetrically rearranged. This essentially generalizes an isoperimetric inequality of Peres and Sousi (2011) for the Wiener sausage. In the second application, we show that the q-capacity of a Borel measurable set for a Levy process can only increase if the set and the Levy process are symmetrically rearranged. This result generalizes an inequality obtained by Watanabe (1983) for symmetric Levy processes.

  17. Optimizing signal and image processing applications using Intel libraries

    Science.gov (United States)

    Landré, Jérôme; Truchetet, Frédéric

    2007-01-01

    This paper presents optimized signal and image processing libraries from Intel Corporation. Intel Performance Primitives (IPP) is a low-level signal and image processing library developed by Intel Corporation to optimize code on Intel processors. Open Computer Vision library (OpenCV) is a high-level library dedicated to computer vision tasks. This article describes the use of both libraries to build flexible and efficient signal and image processing applications.

  18. Particle removal process during application of impinging dry ice jet

    OpenAIRE

    Liu, Yi-Hung; Hirama, Daisuke; Matsusaka, Shuji

    2012-01-01

    In this study, we have investigated the application of dry ice blasting to remove fine particles adhering to surfaces and examined the removal process. The removal efficiency, area, and frequency have been analyzed using images captured with a high-speed microscope camera. In addition, the temperature of the dry ice jet has been measured in order to evaluate the dry ice particles and their effects on the particle removal process. The removal processes due to the impacts of primary dry ice par...

  19. Application of TQM principles to the utilization management process.

    Science.gov (United States)

    Miller, J B; Rose, M S; Milakovich, M; Rosasco, E J

    1992-01-01

    Application of the philosophy and principles of TQM and CQI to utilization management within an institution necessitates an in-depth review of the systems and processes of the flow of inpatients throughout their stay. This encompasses a total systems perspective, beginning with the admitting process and going through the discharge process. TQM and CQI philosophies identify that the most significant and costly inefficiencies are due to faulty systems and processes, not individuals. Applying this management strategy to a health care institution requires a detailed review and analysis of processes by which service is delivered and requires evaluation of the outcomes of patient care and patient satisfaction.

  20. Isolation of Enterobacter aerogenes carrying blaTEM-1 and blaKPC-3 genes recovered from a hospital Intensive Care Unit.

    Science.gov (United States)

    Pulcrano, Giovanna; Pignanelli, Salvatore; Vollaro, Adriana; Esposito, Matilde; Iula, Vita Dora; Roscetto, Emanuela; Soriano, Amata Amy; Catania, Maria Rosaria

    2016-06-01

    Enterobacter aerogenes has recently emerged as an important hospital pathogen. In this study, we showed the emergence of E. aerogenes isolates carrying the blaKPC gene in patients colonized by carbapenem-resistant Klebsiella pneumoniae strains. Two multiresistant E. aerogenes isolates were recovered from bronchial aspirates of two patients hospitalized in the Intensive Care Unit at the "Santa Maria della Scaletta" Hospital, Imola. The antimicrobial susceptibility test showed the high resistance to carbapenems and double-disk synergy test confirmed the phenotype of KPC and AmpC production. Other investigation revealed that ESBL and blaKPC genes were carried on the conjugative pKpQIL plasmid. This is a relevant report in Italy that describes a nosocomial infection due to the production of KPC beta-lactamases by an E. aerogenes isolate in patients previously colonized by K. pneumoniae carbapenem-resistant. In conclusion, it's necessary a continuous monitoring of multidrug-resistant strains for the detection of any KPC-producing bacteria that could expand the circulation of carbapenem-resistant pathogens.

  1. blaGES carrying Pseudomonas aeruginosa isolates from a public hospital in Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Flávia L. P. C. Pellegrino

    2006-08-01

    Full Text Available Previous analysis of Pseudomonas aeruginosa class-1 integrons from Rio de Janeiro, Brazil, revealed the blaGES gene in one isolate. We screened isolates of two widespread PFGE genotypes, A and B, at a public hospital in Rio, for the presence of blaGES. The gene was detected in all seven P. aeruginosa isolates belonging to genotype B. Three of the seven genotype-B isolates were resistant to amikacin, aztreonam, ceftazidime, cefepime, ciprofloxacin, gentamicin, imipenem, meropenem, piperacillin-tazobactam and ticarcillin-clavulanic acid. The other four isolates were resistant to all these agents, except gentamicin, imipenem, meropenem and piperacillin-tazobactam. A synergistic effect between ceftazidime and imipenem or clavulanic acid suggested the production of GES-type ESBL.

  2. Characterization of blaOXA-143 variants in Acinetobacter baumannii and Acinetobacter pittii.

    Science.gov (United States)

    Zander, Esther; Bonnin, Rémy A; Seifert, Harald; Higgins, Paul G

    2014-05-01

    The acquired carbapenem-hydrolyzing oxacillinase (OXA) OXA-143 has thus far been detected only in Acinetobacter baumannii isolates from Brazil. The aim of this study was to characterize three OXA-143 variants: OXA-231 and OXA-253 from carbapenem-resistant A. baumannii isolates and OXA-255 in a carbapenem-susceptible Acinetobacter pittii isolate originating from Brazil, Honduras, and the United States, respectively. The 5' rapid amplification of cDNA ends (RACE) technique identified the same transcription initiation site for all blaOXA-143-like genes and revealed differences in the putative promoter regions. However, all cloned OXA-143 variants conferred carbapenem resistance on A. baumannii ATCC 17978 and OXA-255 conferred carbapenem resistance on A. pittii SH024, which was correlated with blaOXA-255 gene expression. This is the first description of OXA-143-like outside A. baumannii. Detection of OXA-143-like in the United States and Honduras indicates its dissemination through the American continent.

  3. Effective application of statistical process control (SPC on the lengthwise tonsure rolled plates process

    Directory of Open Access Journals (Sweden)

    D. Noskievičová

    2012-01-01

    Full Text Available This paper deals with the effective application of SPC on the lengthwise tonsure rolled plates process on double side scissors. After explanation of the SPC fundamentals, goals and mistakes during the SPC implementation, the methodical framework for the effective SPC application is defined. In the next part of the paper the description of practical application of SPC and its analysis from the point of view of this framework is accomplished.

  4. Newly Developed Software Application for Multiple Access Process Planning

    Directory of Open Access Journals (Sweden)

    Katarina Monkova

    2014-11-01

    Full Text Available The purchase of a complex system for computer aided process planning (CAPP can be expensive for little and some middle sized plants, sometimes an inaccessible investment, with a long recoupment period. According to this fact and the author's experience with Eastern European plants, they decided to design a new database application which is suitable for production, stock, and economic data holding as well as processing and exploitation within the manufacturing process. The application can also be used to process a plan according to the selected criteria, for technological documentation and NC program creation. It was based on the theory of a multivariant approach to computer aided plan generation. Its fundamental features, the internal mathematical structure and new code system of processed objects, were prepared by the authors. The verification of the designed information system in real practice has shown that it enables about 30% cost and production time reduction and decreases input material assortment variability.

  5. Fluctuations of Lévy processes with applications introductory lectures

    CERN Document Server

    Kyprianou, Andreas E

    2014-01-01

    Lévy processes are the natural continuous-time analogue of random walks and form a rich class of stochastic processes around which a robust mathematical theory exists. Their application appears in the theory of many areas of classical and modern stochastic processes including storage models, renewal processes, insurance risk models, optimal stopping problems, mathematical finance, continuous-state branching processes and positive self-similar Markov processes. This textbook is based on a series of graduate courses concerning the theory and application of Lévy processes from the perspective of their path fluctuations. Central to the presentation is the decomposition of paths in terms of excursions from the running maximum as well as an understanding of short- and long-term behaviour. The book aims to be mathematically rigorous while still providing an intuitive feel for underlying principles. The results and applications often focus on the case of Lévy processes with jumps in only one direction, for which r...

  6. Review of computational fluid dynamics applications in biotechnology processes.

    Science.gov (United States)

    Sharma, C; Malhotra, D; Rathore, A S

    2011-01-01

    Computational fluid dynamics (CFD) is well established as a tool of choice for solving problems that involve one or more of the following phenomena: flow of fluids, heat transfer,mass transfer, and chemical reaction. Unit operations that are commonly utilized in biotechnology processes are often complex and as such would greatly benefit from application of CFD. The thirst for deeper process and product understanding that has arisen out of initiatives such as quality by design provides further impetus toward usefulness of CFD for problems that may otherwise require extensive experimentation. Not surprisingly, there has been increasing interest in applying CFD toward a variety of applications in biotechnology processing in the last decade. In this article, we will review applications in the major unit operations involved with processing of biotechnology products. These include fermentation,centrifugation, chromatography, ultrafiltration, microfiltration, and freeze drying. We feel that the future applications of CFD in biotechnology processing will focus on establishing CFD as a tool of choice for providing process understanding that can be then used to guide more efficient and effective experimentation. This article puts special emphasis on the work done in the last 10 years.

  7. Agricultural and Food Processing Applications of Pulsed Power Technology

    Science.gov (United States)

    Takaki, Koichi; Ihara, Satoshi

    Recent progress of agricultural and food processing applications of pulsed power is described in this paper. Repetitively operated compact pulsed power generators with a moderate peak power have been developed for the agricultural and the food processing applications. These applications are mainly based on biological effects and can be categorized as decontamination of air and liquid, germination promotion, inhabitation of saprophytes growth, extraction of juice from fruits and vegetables, and fertilization of liquid medium, etc. Types of pulsed power that have biological effects are caused with gas discharges, water discharges, and electromagnetic fields. The discharges yield free radicals, UV radiation, intense electric field, and shock waves. Biologically based applications of pulsed power are performed by selecting the type that gives the target objects the adequate result from among these agents or byproducts. For instance, intense electric fields form pores on the cell membrane, which is called electroporation, or influence the nuclei.

  8. Distribution of allelic variants of the chromosomal gene bla OXA-114-like in Achromobacter xylosoxidans clinical isolates.

    Science.gov (United States)

    Traglia, German Matías; Almuzara, Marisa; Merkier, Andrea Karina; Papalia, Mariana; Galanternik, Laura; Radice, Marcela; Vay, Carlos; Centrón, Daniela; Ramírez, María Soledad

    2013-11-01

    Achromobacter xylosoxidans is increasingly being documented in cystic fibrosis patients. The bla(OXA-114) gene has been recognized as a naturally occurring chromosomal gene, exhibiting different allelic variants. In the population under study, the bla(OXA-114)-like gene was found in 19/19 non-epidemiological-related clinical isolates of A. xylosoxidans with ten different alleles including 1 novel OXA-114 variant.

  9. 3rd Workshop on Branching Processes and their Applications

    CERN Document Server

    González, Miguel; Gutiérrez, Cristina; Martínez, Rodrigo; Minuesa, Carmen; Molina, Manuel; Mota, Manuel; Ramos, Alfonso; WBPA15

    2016-01-01

    This volume gathers papers originally presented at the 3rd Workshop on Branching Processes and their Applications (WBPA15), which was held from 7 to 10 April 2015 in Badajoz, Spain (http://branching.unex.es/wbpa15/index.htm). The papers address a broad range of theoretical and practical aspects of branching process theory. Further, they amply demonstrate that the theoretical research in this area remains vital and topical, as well as the relevance of branching concepts in the development of theoretical approaches to solving new problems in applied fields such as Epidemiology, Biology, Genetics, and, of course, Population Dynamics. The topics covered can broadly be classified into the following areas: 1. Coalescent Branching Processes 2. Branching Random Walks 3. Population Growth Models in Varying and Random Environments 4. Size/Density/Resource-Dependent Branching Models 5. Age-Dependent Branching Models 6. Special Branching Models 7. Applications in Epidemiology 8. Applications in Biology and Genetics Offer...

  10. NGNP Process Heat Applications: Hydrogen Production Accomplishments for FY2010

    Energy Technology Data Exchange (ETDEWEB)

    Charles V Park

    2011-01-01

    This report summarizes FY10 accomplishments of the Next Generation Nuclear Plant (NGNP) Engineering Process Heat Applications group in support of hydrogen production technology development. This organization is responsible for systems needed to transfer high temperature heat from a high temperature gas-cooled reactor (HTGR) reactor (being developed by the INL NGNP Project) to electric power generation and to potential industrial applications including the production of hydrogen.

  11. Processing, properties and some novel applications of magnetic nanoparticles

    Indian Academy of Sciences (India)

    D Bahadur; J Giri; Bibhuti B Nayak; T Sriharsha; P Pradhan; N K Prasad; K C Barick; R D Ambashta

    2005-10-01

    Magnetic nanoparticles have been prepared by various soft chemical methods including self-assembly. The bare or surface-modified particles find applications in areas such as hyperthermia treatment of cancer and magnetic field-assisted radioactive chemical separation. We present here some of the salient features of processing of nanostructured magnetic materials of different sizes and shapes, their properties and some possible applications. The materials studied included metals, metal-ceramic composites, and ferrites.

  12. Multiresolution approach to processing images for different applications interaction of lower processing with higher vision

    CERN Document Server

    Vujović, Igor

    2015-01-01

    This book presents theoretical and practical aspects of the interaction between low and high level image processing. Multiresolution analysis owes its popularity mostly to wavelets and is widely used in a variety of applications. Low level image processing is important for the performance of many high level applications. The book includes examples from different research fields, i.e. video surveillance; biomedical applications (EMG and X-ray); improved communication, namely teleoperation, telemedicine, animation, augmented/virtual reality and robot vision; monitoring of the condition of ship systems and image quality control.

  13. Cascaded process model based control: packed absorption column application.

    Science.gov (United States)

    Govindarajan, Anand; Jayaraman, Suresh Kumar; Sethuraman, Vijayalakshmi; Raul, Pramod R; Rhinehart, R Russell

    2014-03-01

    Nonlinear, adaptive, process-model based control is demonstrated in a cascaded single-input-single-output mode for pressure drop control in a pilot-scale packed absorption column. The process is shown to be nonlinear. Control is demonstrated in both servo and regulatory modes, for no wind-up in a constrained situation, and for bumpless transfer. Model adaptation is demonstrated and shown to provide process insight. The application procedure is revealed as a design guide to aid others in implementing process-model based control.

  14. Study on customization process and application via Internet

    Institute of Scientific and Technical Information of China (English)

    周康渠; YANG; Yu; 等

    2002-01-01

    Networked customization is an important way for enterprises to satisfy customers'individual requirements.From this point of view,the study on networked customization process and application is started with analyzing the customization process in detail,in which the customization process is divided into 6 stages including information capture,need submission,need affirmation,need interaction,creating customization orders and customization production.A general customization process chart for common products is presented,which describes the communication between customers and enterprises in the entire customization process.The method of analyzing customization process is pressented.The product customization subsystem in the system of ceramic product marketing and customization of Chongqing CHN & CHN Ceramics Co.Ltd.is introduced to explicate the process of customization via Internet.

  15. Potential Applications of Zeolite Membranes in Reaction Coupling Separation Processes

    Directory of Open Access Journals (Sweden)

    Tunde V. Ojumu

    2012-10-01

    Full Text Available Future production of chemicals (e.g., fine and specialty chemicals in industry is faced with the challenge of limited material and energy resources. However, process intensification might play a significant role in alleviating this problem. A vision of process intensification through multifunctional reactors has stimulated research on membrane-based reactive separation processes, in which membrane separation and catalytic reaction occur simultaneously in one unit. These processes are rather attractive applications because they are potentially compact, less capital intensive, and have lower processing costs than traditional processes. Therefore this review discusses the progress and potential applications that have occurred in the field of zeolite membrane reactors during the last few years. The aim of this article is to update researchers in the field of process intensification and also provoke their thoughts on further research efforts to explore and exploit the potential applications of zeolite membrane reactors in industry. Further evaluation of this technology for industrial acceptability is essential in this regard. Therefore, studies such as techno-economical feasibility, optimization and scale-up are of the utmost importance.

  16. Hidden Markov processes theory and applications to biology

    CERN Document Server

    Vidyasagar, M

    2014-01-01

    This book explores important aspects of Markov and hidden Markov processes and the applications of these ideas to various problems in computational biology. The book starts from first principles, so that no previous knowledge of probability is necessary. However, the work is rigorous and mathematical, making it useful to engineers and mathematicians, even those not interested in biological applications. A range of exercises is provided, including drills to familiarize the reader with concepts and more advanced problems that require deep thinking about the theory. Biological applications are t

  17. Image and signal processing for networked eHealth applications

    CERN Document Server

    Maglogiannis, Ilias

    2006-01-01

    E-health is closely related with networks and telecommunications when dealing with applications of collecting or transferring medical data from distant locations for performing remote medical collaborations and diagnosis. In this book we provide an overview of the fields of image and signal processing for networked and distributed e-health applications and their supporting technologies. The book is structured in 10 chapters, starting the discussion from the lower end, that of acquisition and processing of biosignals and medical images and ending in complex virtual reality systems and technique

  18. THE WAY OF PROCESSING DATA IN APPROACHING ECONOMIC APPLICATIONS

    Directory of Open Access Journals (Sweden)

    ADRIAN GHENCEA

    2012-05-01

    Full Text Available Economic Informatics originates in the industry economy and the electronic processing of information. A clear distinction is made between IT and economic informatics, and further between general and particular economic informatics (the particular economic informatics meaning administration, industrial informatics etc. Economic informatics is deemed to be an applicative science relating to the conception, working modality and representation of IT and communication systems, oriented towards companies which are using electronic computers. This paper pursues to integrate applications allowing the information systems to interconnect at informational level, by information sharing, and at service level, considering the control of the related processes in real time.

  19. Text mining from ontology learning to automated text processing applications

    CERN Document Server

    Biemann, Chris

    2014-01-01

    This book comprises a set of articles that specify the methodology of text mining, describe the creation of lexical resources in the framework of text mining and use text mining for various tasks in natural language processing (NLP). The analysis of large amounts of textual data is a prerequisite to build lexical resources such as dictionaries and ontologies and also has direct applications in automated text processing in fields such as history, healthcare and mobile applications, just to name a few. This volume gives an update in terms of the recent gains in text mining methods and reflects

  20. Guar gum: processing, properties and food applications-A Review.

    Science.gov (United States)

    Mudgil, Deepak; Barak, Sheweta; Khatkar, Bhupendar Singh

    2014-03-01

    Guar gum is a novel agrochemical processed from endosperm of cluster bean. It is largely used in the form of guar gum powder as an additive in food, pharmaceuticals, paper, textile, explosive, oil well drilling and cosmetics industry. Industrial applications of guar gum are possible because of its ability to form hydrogen bonding with water molecule. Thus, it is chiefly used as thickener and stabilizer. It is also beneficial in the control of many health problems like diabetes, bowel movements, heart disease and colon cancer. This article focuses on production, processing, composition, properties, food applications and health benefits of guar gum.

  1. High-flux solar photon processes: Opportunities for applications

    Energy Technology Data Exchange (ETDEWEB)

    Steinfeld, J I; Coy, S L; Herzog, H; Shorter, J A; Schlamp, M; Tester, J W; Peters, W A [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1992-06-01

    The overall goal of this study was to identify new high-flux solar photon (HFSP) processes that show promise of being feasible and in the national interest. Electric power generation and hazardous waste destruction were excluded from this study at sponsor request. Our overall conclusion is that there is promise for new applications of concentrated solar photons, especially in certain aspects of materials processing and premium materials synthesis. Evaluation of the full potential of these and other possible applications, including opportunities for commercialization, requires further research and testing. 100 refs.

  2. Image processing and mathematical morphology fundamentals and applications

    CERN Document Server

    Shih, Frank Y

    2009-01-01

    In the development of digital multimedia, the importance and impact of image processing and mathematical morphology are well documented in areas ranging from automated vision detection and inspection to object recognition, image analysis and pattern recognition. Those working in these ever-evolving fields require a solid grasp of basic fundamentals, theory, and related applications and few books can provide the unique tools for learning contained in this text. Image Processing and Mathematical Morphology: Fundamentals and Applications is a comprehensive, wide-ranging overview of morphological

  3. Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications

    Science.gov (United States)

    Miyanaji, Hadi; Zhang, Shanshan; Lassell, Austin; Zandinejad, Amirali; Yang, Li

    2016-03-01

    Custom ceramic structures possess significant potentials in many applications such as dentistry and aerospace where extreme environments are present. Specifically, highly customized geometries with adequate performance are needed for various dental prostheses applications. This paper demonstrates the development of process and post-process parameters for a dental porcelain ceramic material using binder jetting additive manufacturing (AM). Various process parameters such as binder amount, drying power level, drying time and powder spread speed were studied experimentally for their effect on geometrical and mechanical characteristics of green parts. In addition, the effects of sintering and printing parameters on the qualities of the densified ceramic structures were also investigated experimentally. The results provide insights into the process-property relationships for the binder jetting AM process, and some of the challenges of the process that need to be further characterized for the successful adoption of the binder jetting technology in high quality ceramic fabrications are discussed.

  4. Probability and Random Processes With Applications to Signal Processing and Communications

    CERN Document Server

    Miller, Scott

    2012-01-01

    Miller and Childers have focused on creating a clear presentation of foundational concepts with specific applications to signal processing and communications, clearly the two areas of most interest to students and instructors in this course. It is aimed at graduate students as well as practicing engineers, and includes unique chapters on narrowband random processes and simulation techniques. The appendices provide a refresher in such areas as linear algebra, set theory, random variables, and more. Probability and Random Processes also includes applications in digital communications, informati

  5. Microchannel enzyme reactors and their applications for processing.

    Science.gov (United States)

    Miyazaki, Masaya; Maeda, Hideaki

    2006-10-01

    Microreaction technology is an interdisciplinary field combining science and engineering. It has attracted the attention of researchers from different fields for the past few years, resulting in the development of several microreactors. Enzymes are one of the catalysts used in microreactors: they are useful for substance production in an environmentally friendly way and have high potential for analytical applications. However, few enzymatic processes have been commercialized because of problems with stability and the cost and efficiency of the reactions. Thus, there have been demands for innovation in process engineering, particularly for enzymatic reactions, and microreaction devices can serve as efficient tools for the development of enzyme processes. In this review, we summarize the recent advances of enzyme-immobilized microchannel reactors; fundamental techniques for micro enzyme-reactor design and important applications of this multidisciplinary technology in chemical processing are also included in our topics.

  6. Applications of evolutionary computation in image processing and pattern recognition

    CERN Document Server

    Cuevas, Erik; Perez-Cisneros, Marco

    2016-01-01

    This book presents the use of efficient Evolutionary Computation (EC) algorithms for solving diverse real-world image processing and pattern recognition problems. It provides an overview of the different aspects of evolutionary methods in order to enable the reader in reaching a global understanding of the field and, in conducting studies on specific evolutionary techniques that are related to applications in image processing and pattern recognition. It explains the basic ideas of the proposed applications in a way that can also be understood by readers outside of the field. Image processing and pattern recognition practitioners who are not evolutionary computation researchers will appreciate the discussed techniques beyond simple theoretical tools since they have been adapted to solve significant problems that commonly arise on such areas. On the other hand, members of the evolutionary computation community can learn the way in which image processing and pattern recognition problems can be translated into an...

  7. Data Processing in Precise Time and Frequency Applications

    CERN Document Server

    Desaintfuscien, Michel

    2007-01-01

    Physical processes, involving atomic phenomena, allow more and more precise time and frequency measurements. This progress is not possible without convenient processing of the respective raw data. The book describes the data processing at various levels: design of the time and frequency references, characterization of the time and frequency references, applications involving precise time and/or frequency references. The metrological properties stability, accuracy and reproducibility are defined and the processes leading to their characterization are shown. The various aspects of the variance of the frequency fluctuations are discussed and compared and their significance is given. Some major applications of the best frequency and time standards are finally discussed. The way the extreme precision of these sources is used to obtain precise time and position information is shown: - Time scales, used to describe every human and physical activities, such as astronomy, physical laws, etc. - Positioning systems, suc...

  8. APPLICATION OF INDICATORS BUSINESS PROCESSES FOR ENTERPRISE MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Yakhontova I. M.

    2015-11-01

    Full Text Available The formation of a system of indicators for assessing the performance of the business processes of the enterprise is one of the most actual and modern directions of increase of efficiency of activity of the enterprise. The system of indicators should be developed in accordance with the specifics of company's activity, its strategic goals and available resources. Consideration of the process of developing a system of indicators of business processes on a specific example of an industrial enterprise allows not only to evaluate the operation of departments in terms of running processes, but also to develop a list of measures to improve the efficiency of functions execution of business processes. The work presents theoretical information, the development of a system of indicators of business processes within the selected areas using this method of process optimization. The initial stage of the work on the development and evaluation of a system of indicators of business processes was made by enterprise characteristics, description of its organizational structure and core activities. The article considers the indicators of process, product and satisfaction of customers in terms of cost, time and technical performance. For example, the business process that best reflects the specifics of the enterprise, the process of developing a system of indicators and presented conclusions, and developed recommendations and actions for the application of the system of indicators of business processes

  9. Benchmarking Distributed Stream Processing Platforms for IoT Applications

    OpenAIRE

    Shukla, Anshu; Simmhan, Yogesh

    2016-01-01

    Internet of Things (IoT) is a technology paradigm where millions of sensors monitor, and help inform or manage, physical, envi- ronmental and human systems in real-time. The inherent closed-loop re- sponsiveness and decision making of IoT applications makes them ideal candidates for using low latency and scalable stream processing plat- forms. Distributed Stream Processing Systems (DSPS) are becoming es- sential components of any IoT stack, but the efficacy and performance of contemporary DSP...

  10. Application of electrical capacitance tomography for imaging industrial processes

    Institute of Scientific and Technical Information of China (English)

    DYAKOWSKI Tom

    2005-01-01

    Electrical tomography is, in certain cases, the most attractive method for real imaging of industrial processes, because of its inherent simplicity, rugged cons truction of the tomographer and high-speed capability. This paper presents examples illustrating applications of electrical tomography for imaging fluidized beds, bubble columns and pneumatic conveyors. Electrical tomography opens up new ways for processing, imaging and modelling multi-phase flows as shown by 2D and 3D images illustrating the various types of flow morphology.

  11. APPLICATION OF MVP IN REAL-TIME IMAGE PROCESSING

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    MVP is a digital signal processor, which is of MIMD structure and fit for multimedia application. MVP has several processors in it, and its operation is characteristic of parallelism and pipeline; therefore, real-time signal processing can be done on it. This paper presents the image processing system based on MVP, explains the principles of parallel task assignment and hardware pipeline design, and gives out the example of target tracking and edge detection.

  12. Fractional Order Signal Processing Introductory Concepts and Applications

    CERN Document Server

    Das, Saptarshi

    2012-01-01

    The book tries to briefly introduce the diverse literatures in the field of fractional order signal processing which is becoming an emerging topic among an interdisciplinary community of researchers. This book is aimed at postgraduate and beginning level research scholars who would like to work in the field of Fractional Order Signal processing (FOSP). The readers should have preliminary knowledge about basic signal processing techniques. Prerequisite knowledge of fractional calculus is not essential and is exposited at relevant places in connection to the appropriate signal processing topics. Basic signal processing techniques like filtering, estimation, system identification, etc. in the light of fractional order calculus are presented along with relevant application areas. The readers can easily extend these concepts to varied disciplines like image or speech processing, pattern recognition, time series forecasting, financial data analysis and modeling, traffic modeling in communication channels, optics, b...

  13. New Insulation Application Process for Wind-And Magnet Fabrication

    Science.gov (United States)

    Kano, K. S.; Stewart, M. W.; Hooker, M. W.

    2008-03-01

    Wind-and-react processes offer a cost-effective means of fabricating large-scale Nb3Sn magnets, while also eliminating the need to manipulate the brittle superconductor after the high-temperature reaction process. Composite Technology Development, Inc. (CTD) has developed a hybrid inorganic/organic insulation system that can be co-processed with the Nb3Sn magnet at elevated temperatures. In this work, a new process was demonstrated for applying a thin, ceramic-based insulation that is compatible with wind-and-react processing. The insulation was applied to Rutherford cables using a continuous manufacturing process, and cable assemblies (i.e., 10-stacks) were fabricated and tested. The results of this work show that the insulation possesses a high strain tolerance, as well as the dielectric strength and fatigue resistance needed for high-field magnet applications.

  14. Applications of ultrasound in food technology: Processing, preservation and extraction.

    Science.gov (United States)

    Chemat, Farid; Zill-e-Huma; Khan, Muhammed Kamran

    2011-07-01

    Ultrasound is well known to have a significant effect on the rate of various processes in the food industry. Using ultrasound, full reproducible food processes can now be completed in seconds or minutes with high reproducibility, reducing the processing cost, simplifying manipulation and work-up, giving higher purity of the final product, eliminating post-treatment of waste water and consuming only a fraction of the time and energy normally needed for conventional processes. Several processes such as freezing, cutting, drying, tempering, bleaching, sterilization, and extraction have been applied efficiently in the food industry. The advantages of using ultrasound for food processing, includes: more effective mixing and micro-mixing, faster energy and mass transfer, reduced thermal and concentration gradients, reduced temperature, selective extraction, reduced equipment size, faster response to process extraction control, faster start-up, increased production, and elimination of process steps. Food processes performed under the action of ultrasound are believed to be affected in part by cavitation phenomena and mass transfer enhancement. This review presents a complete picture of current knowledge on application of ultrasound in food technology including processing, preservation and extraction. It provides the necessary theoretical background and some details about ultrasound the technology, the technique, and safety precautions. We will also discuss some of the factors which make the combination of food processing and ultrasound one of the most promising research areas in the field of modern food engineering.

  15. Ion exchange membranes in seawater applications : processes and characteristics

    NARCIS (Netherlands)

    Galama, A.H.

    2015-01-01

    Officiële titel ENG: Ion exchange membranes in seawater applications. Processes and characteristics Officiële titel NL: Ionwisselende membranen in zeewatertoepassingen. Processen en eigenschappen Auteur: A.H.Galama Jaar: 2015 ISBN: 978-94-6257-225-6 Samenvatting Zeewaterontzouting stelt me

  16. 44 CFR 209.8 - Application and review process.

    Science.gov (United States)

    2010-10-01

    ... processing subgrants to applicants in accordance with 44 CFR part 13 and this part. (b) Timeframes. We will... historic preservation that is readily available; (9) Attachments for each property as follows: (i) A... list (provide NFIP Repetitive Loss Property Locator Number, if available); and (xiii) Observations...

  17. Computer and control applications in a vegetable processing plant

    Science.gov (United States)

    There are many advantages to the use of computers and control in food industry. Software in the food industry takes 2 forms - general purpose commercial computer software and software for specialized applications, such as drying and thermal processing of foods. Many applied simulation models for d...

  18. Elements of the theory of Markov processes and their applications

    CERN Document Server

    Bharucha-Reid, A T

    2010-01-01

    This graduate-level text and reference in probability, with numerous applications to several fields of science, presents nonmeasure-theoretic introduction to theory of Markov processes. The work also covers mathematical models based on the theory, employed in various applied fields. Prerequisites are a knowledge of elementary probability theory, mathematical statistics, and analysis. Appendixes. Bibliographies. 1960 edition.

  19. Application of Resid Hydrogenation Process in Mainland China

    Institute of Scientific and Technical Information of China (English)

    Diao Wangsheng

    2007-01-01

    This article mainly refers to a brief introduction on the design and operation of resid hydrogenation units in Mainland China in order to keep the peers abreast of the basic status of application of resid hydrogenation process in the Mainland China.

  20. Application of digital image processing for pot plant grading.

    NARCIS (Netherlands)

    Dijkstra, J.

    1994-01-01

    The application of digital image processing for grading of pot plants has been studied. Different techniques e.q. plant part identification based on knowledge based segmentation, have been developed to measure features of plants in different growth stage. Growth experiments were performed to identif

  1. 10 CFR 451.9 - Procedures for processing applications.

    Science.gov (United States)

    2010-01-01

    ... or operators of qualified renewable energy facilities using solar, wind, ocean, geothermal, and... 10 Energy 3 2010-01-01 2010-01-01 false Procedures for processing applications. 451.9 Section 451.9 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES §...

  2. Application of the wavelet transform for speech processing

    Science.gov (United States)

    Maes, Stephane

    1994-01-01

    Speaker identification and word spotting will shortly play a key role in space applications. An approach based on the wavelet transform is presented that, in the context of the 'modulation model,' enables extraction of speech features which are used as input for the classification process.

  3. Improved Strategies for Parallel Medical Image Processing Applications

    Institute of Scientific and Technical Information of China (English)

    WANG Kun; WANG Xiao-ying; LI San-li; CHEN Ying

    2008-01-01

    In order to meet the demands of high efficient and real-time computer assisted diagnosis as well as screening in medical area, to improve the efficacy of parallel medical image processing is of great importance. This article proposes improved strategies for parallel medical image processing applications,which is categorized into two genera. For each genus individual strategy is devised, including the theoretic algorithm for minimizing the exertion time. Experiment using mammograms not only justifies the validity of the theoretic analysis, with reasonable difference between the theoretic and measured value, but also shows that when adopting the improved strategies, efficacy of medical image parallel processing is improved greatly.

  4. An introduction to stochastic processes with applications to biology

    CERN Document Server

    Allen, Linda J S

    2010-01-01

    An Introduction to Stochastic Processes with Applications to Biology, Second Edition presents the basic theory of stochastic processes necessary in understanding and applying stochastic methods to biological problems in areas such as population growth and extinction, drug kinetics, two-species competition and predation, the spread of epidemics, and the genetics of inbreeding. Because of their rich structure, the text focuses on discrete and continuous time Markov chains and continuous time and state Markov processes.New to the Second EditionA new chapter on stochastic differential equations th

  5. [Sustainable process improvement with application of 'lean philosophy'].

    Science.gov (United States)

    Rouppe van der Voort, Marc B V; van Merode, G G Frits; Veraart, Henricus G N

    2013-01-01

    Process improvement is increasingly being implemented, particularly with the aid of 'lean philosophy'. This management philosophy aims to improve quality by reducing 'wastage'. Local improvements can produce negative effects elsewhere due to interdependence of processes. An 'integrated system approach' is required to prevent this. Some hospitals claim that this has been successful. Research into process improvement with the application of lean philosophy has reported many positive effects, defined as improved safety, quality and efficiency. Due to methodological shortcomings and lack of rigorous evaluations it is, however, not yet possible to determine the impact of this approach. It is, however, obvious that the investigated applications are fragmentary, with a dominant focus on the instrumental aspect of the philosophy and a lack of integration in a total system, and with insufficient attention to human aspects. Process improvement is required to achieve better and more goal-oriented healthcare. To achieve this, hospitals must develop integrated system approaches that combine methods for process design with continuous improvement of processes and with personnel management. It is crucial that doctors take the initiative to guide and improve processes in an integral manner.

  6. APPLICABILITY OF ACTIVITY BASED COSTING IN NEW PRODUCT DEVELOPMENT PROCESSES

    Directory of Open Access Journals (Sweden)

    Ewa Wanda MARUSZEWSKA

    2015-01-01

    Full Text Available The purpose of the article is to emphasis that activity based costing is a proper tool for engineers to enhance their deci-sion-making process while developing new product. The theoretical analysis shows that variety of factors shall be en-compassed into new product decision-making process and therefore engineers and management should pay great attention to proper cost allocation. The paper suggests the usage of Activity Based Costing methodology for new product development decision-making process. Author states that application ABC in the process of rational decision-making referring to new product development enables managers and engineers to prioritize possible solutions, and reallocate resources used in production process in order to meet wider organizational goals. It would also contribute in coopera-tion of managers and engineers for the sake of organizational goal.

  7. All-optical signal processing data communication and storage applications

    CERN Document Server

    Eggleton, Benjamin

    2015-01-01

    This book provides a comprehensive review of the state-of-the art of optical signal processing technologies and devices. It presents breakthrough solutions for enabling a pervasive use of optics in data communication and signal storage applications. It presents presents optical signal processing as solution to overcome the capacity crunch in communication networks. The book content ranges from the development of innovative materials and devices, such as graphene and slow light structures, to the use of nonlinear optics for secure quantum information processing and overcoming the classical Shannon limit on channel capacity and microwave signal processing. Although it holds the promise for a substantial speed improvement, today’s communication infrastructure optics remains largely confined to the signal transport layer, as it lags behind electronics as far as signal processing is concerned. This situation will change in the near future as the tremendous growth of data traffic requires energy efficient and ful...

  8. First International Conference Multimedia Processing, Communication and Computing Applications

    CERN Document Server

    Guru, Devanur

    2013-01-01

    ICMCCA 2012 is the first International Conference on Multimedia Processing, Communication and Computing Applications and the theme of the Conference is chosen as ‘Multimedia Processing and its Applications’. Multimedia processing has been an active research area contributing in many frontiers of today’s science and technology. This book presents peer-reviewed quality papers on multimedia processing, which covers a very broad area of science and technology. The prime objective of the book is to familiarize readers with the latest scientific developments that are taking place in various fields of multimedia processing and is widely used in many disciplines such as Medical Diagnosis, Digital Forensic, Object Recognition, Image and Video Analysis, Robotics, Military, Automotive Industries, Surveillance and Security, Quality Inspection, etc. The book will assist the research community to get the insight of the overlapping works which are being carried out across the globe at many medical hospitals and instit...

  9. Fractional Processes and Fractional-Order Signal Processing Techniques and Applications

    CERN Document Server

    Sheng, Hu; Qiu, TianShuang

    2012-01-01

    Fractional processes are widely found in science, technology and engineering systems. In Fractional Processes and Fractional-order Signal Processing, some complex random signals, characterized by the presence of a heavy-tailed distribution or non-negligible dependence between distant observations (local and long memory), are introduced and examined from the ‘fractional’ perspective using simulation, fractional-order modeling and filtering and realization of fractional-order systems. These fractional-order signal processing (FOSP) techniques are based on fractional calculus, the fractional Fourier transform and fractional lower-order moments. Fractional Processes and Fractional-order Signal Processing: • presents fractional processes of fixed, variable and distributed order studied as the output of fractional-order differential systems; • introduces FOSP techniques and the fractional signals and fractional systems point of view; • details real-world-application examples of FOSP techniques to demonstr...

  10. Chromosomal Integration of the Klebsiella pneumoniae Carbapenemase Gene, blaKPC, in Klebsiella Species Is Elusive but Not Rare

    Science.gov (United States)

    Chai, Weidong; Carroll, Joanne; Barry, Katie; Cherunvanky, Anita; Sebra, Robert; Kasarskis, Andrew; Peto, Tim E.; Walker, A. Sarah; Sifri, Costi D.; Crook, Derrick W.; Sheppard, Anna E.

    2016-01-01

    ABSTRACT Carbapenemase genes in Enterobacteriaceae are mostly described as being plasmid associated. However, the genetic context of carbapenemase genes is not always confirmed in epidemiological surveys, and the frequency of their chromosomal integration therefore is unknown. A previously sequenced collection of blaKPC-positive Enterobacteriaceae from a single U.S. institution (2007 to 2012; n = 281 isolates from 182 patients) was analyzed to identify chromosomal insertions of Tn4401, the transposon most frequently harboring blaKPC. Using a combination of short- and long-read sequencing, we confirmed five independent chromosomal integration events from 6/182 (3%) patients, corresponding to 15/281 (5%) isolates. Three patients had isolates identified by perirectal screening, and three had infections which were all successfully treated. When a single copy of blaKPC was in the chromosome, one or both of the phenotypic carbapenemase tests were negative. All chromosomally integrated blaKPC genes were from Klebsiella spp., predominantly K. pneumoniae clonal group 258 (CG258), even though these represented only a small proportion of the isolates. Integration occurred via IS15-ΔI-mediated transposition of a larger, composite region encompassing Tn4401 at one locus of chromosomal integration, seen in the same strain (K. pneumoniae ST340) in two patients. In summary, we identified five independent chromosomal integrations of blaKPC in a large outbreak, demonstrating that this is not a rare event. blaKPC was more frequently integrated into the chromosome of epidemic CG258 K. pneumoniae lineages (ST11, ST258, and ST340) and was more difficult to detect by routine phenotypic methods in this context. The presence of chromosomally integrated blaKPC within successful, globally disseminated K. pneumoniae strains therefore is likely underestimated. PMID:28031204

  11. Visas for Switzerland and France - Time needed to process applications

    CERN Multimedia

    2012-01-01

    Please note that any person required to be in possession of a visa in order to take up functions at CERN must start the application process sufficiently early to allow the visa to be issued in time.   The submission of an incomplete application, local circumstances and an increase in applications before the summer holiday period can all result in considerable variation in the time needed to process your application and issue the visa. You are therefore recommended to submit your visa application at least three months, and not later than 21 days, prior to your departure date. We would also like to remind you that the Swiss Consulate in Paris and the French Consulate in Geneva can issue visas exclusively to people resident within their respective spheres of competence (i.e. those who are holders of a French or Swiss residence permit respectively). You must therefore obtain all visas required for stays longer than three months in France or Switzerland from the visa-issuing authority competent for ...

  12. Possibilities of computer application in modern geography teaching process

    Directory of Open Access Journals (Sweden)

    Ivkov-Džigurski Anđelija

    2009-01-01

    Full Text Available Geography is a science that follows modern trends in the development of contemporary science. One of the crucial things that gives teaching process a high quality in the application of modern techniques and methods. Modern organization of the teaching process in primary and secondary schools is unimaginable without innovations. This would mean changes and new elements in all segments of the teaching process. Good organization, innovation and new tendencies in the development of the science can raise the quality of the teaching process, thus enabling the student to study fully and rationally. Innovations should help students develop a dialectic way of thinking when explaining objects, phenomena and processes in nature and society, as well as enable them to notice cause and effect relationships. The application of new methods should provide maximum activity of the students in terms of their research and independent work. Computers are used in many different ways therefore they can be used very rationally in different segments of the teaching process.

  13. Nanotechnology in meat processing and packaging: potential applications - a review.

    Science.gov (United States)

    Ramachandraiah, Karna; Han, Sung Gu; Chin, Koo Bok

    2015-02-01

    Growing demand for sustainable production, increasing competition and consideration of health concerns have led the meat industries on a path to innovation. Meat industries across the world are focusing on the development of novel meat products and processes to meet consumer demand. Hence, a process innovation, like nanotechnology, can have a significant impact on the meat processing industry through the development of not only novel functional meat products, but also novel packaging for the products. The potential benefits of utilizing nanomaterials in food are improved bioavailability, antimicrobial effects, enhanced sensory acceptance and targeted delivery of bioactive compounds. However, challenges exist in the application of nanomaterials due to knowledge gaps in the production of ingredients such as nanopowders, stability of delivery systems in meat products and health risks caused by the same properties which also offer the benefits. For the success of nanotechnology in meat products, challenges in public acceptance, economics and the regulation of food processed with nanomaterials which may have the potential to persist, accumulate and lead to toxicity need to be addressed. So far, the most promising area for nanotechnology application seems to be in meat packaging, but the long term effects on human health and environment due to migration of the nanomaterials from the packaging needs to be studied further. The future of nanotechnology in meat products depends on the roles played by governments, regulatory agencies and manufacturers in addressing the challenges related to the application of nanomaterials in food.

  14. Stochastic processes and applications diffusion processes, the Fokker-Planck and Langevin equations

    CERN Document Server

    Pavliotis, Grigorios A

    2014-01-01

    This book presents various results and techniques from the theory of stochastic processes that are useful in the study of stochastic problems in the natural sciences. The main focus is analytical methods, although numerical methods and statistical inference methodologies for studying diffusion processes are also presented. The goal is the development of techniques that are applicable to a wide variety of stochastic models that appear in physics, chemistry and other natural sciences. Applications such as stochastic resonance, Brownian motion in periodic potentials and Brownian motors are studied and the connection between diffusion processes and time-dependent statistical mechanics is elucidated.                 The book contains a large number of illustrations, examples, and exercises. It will be useful for graduate-level courses on stochastic processes for students in applied mathematics, physics and engineering. Many of the topics covered in this book (reversible diffusions, convergence to eq...

  15. Process monitoring for intelligent manufacturing processes - Methodology and application to Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas

    quality assurance. This thesis is aimed at a systematic development of process monitoring solutions, constituting a key element of intelligent manufacturing systems towards zero defect manufacturing. A methodological approach of general applicability is presented in this concern.The approach consists...... of six consecutive steps for identification of product Vital Quality Characteristics (VQCs) and Key Process Variables (KPVs), selection and characterization of sensors, optimization of sensors placement, validation of the monitoring solutions, definition of the reference manufacturing performance...

  16. Advances and applications of optimised algorithms in image processing

    CERN Document Server

    Oliva, Diego

    2017-01-01

    This book presents a study of the use of optimization algorithms in complex image processing problems. The problems selected explore areas ranging from the theory of image segmentation to the detection of complex objects in medical images. Furthermore, the concepts of machine learning and optimization are analyzed to provide an overview of the application of these tools in image processing. The material has been compiled from a teaching perspective. Accordingly, the book is primarily intended for undergraduate and postgraduate students of Science, Engineering, and Computational Mathematics, and can be used for courses on Artificial Intelligence, Advanced Image Processing, Computational Intelligence, etc. Likewise, the material can be useful for research from the evolutionary computation, artificial intelligence and image processing co.

  17. Application of Heavy Solvent Deasphalting in Sour Resid Processing

    Institute of Scientific and Technical Information of China (English)

    Long Jun; Wang Zijun; Huang Weiqi; Zu Deguang

    2003-01-01

    Complete conversion of resid into light oil needs to consume large amount of hydrogen, because the light oil has higher hydrogen content. The conversion of whole resid into light oil is not economic at the normal price gap between the light and heavy oils. Hence a combination of hydrogenation process with carbon removal process is generally adopted.The heavy solvent deasphalting can selectively remove the asphaltenes and metals contained in resid while providing a large amount of easily convertible deasphalted oil for the down-stream processes.This article refers to the characteristics of heavy solvent deasphalting and its application in sour resid processing, along with various routes for utilization of deoiled asphalt.

  18. The Clinical Isolate Pseudomonas aeruginosa MMA83 Carries Two Copies of the blaNDM-1 Gene in a Novel Genetic Context

    OpenAIRE

    Jovčić, Branko; Lepsanović, Zorica; Begović, Jelena; Rakonjac, Bojan; Perovanović, Jelena; Topisirović, Ljubiša; Kojić, Milan

    2013-01-01

    The genetic context of the blaNDM-1 gene in the genome of Pseudomonas aeruginosa MMA83 was investigated. Sequencing of the cosmid selected for the blaNDM-1 gene revealed the presence of two blaNDM-1 copies in the genome of P. aeruginosa MMA83 in a unique genetic environment. Additionally, mating assays, DNA-DNA hybridization, and an S1 nuclease assay strongly suggest that the blaNDM-1 gene in P. aeruginosa MMA83 is chromosome borne.

  19. bla(KPC) RNA expression correlates with two transcriptional start sites but not always with gene copy number in four genera of Gram-negative pathogens.

    Science.gov (United States)

    Roth, Amanda L; Kurpiel, Philip M; Lister, Philip D; Hanson, Nancy D

    2011-08-01

    Klebsiella pneumoniae carbapenemase (KPC)-producing organisms are therapeutically and diagnostically challenging. It is possible that bla(KPC) gene expression plays a role in the variability observed in clinical susceptibility testing. bla(KPC) transformants together with 10 clinical isolates representing four genera were evaluated for bla(KPC) copy number and gene expression and correlated with β-lactam MIC data. The data suggest that mechanisms other than gene copy number and expression of bla(KPC) contribute to variability in susceptibility when testing KPC-producing isolates.

  20. Characterization of a novel plasmid type and various genetic contexts of bla OXA-58 in Acinetobacter spp. from multiple cities in China.

    Directory of Open Access Journals (Sweden)

    Yiqi Fu

    Full Text Available BACKGROUND/OBJECTIVE: Several studies have described the epidemiological distribution of blaOXA-58-harboring Acinetobacter baumannii in China. However, there is limited data concerning the replicon types of blaOXA-58-carrying plasmids and the genetic context surrounding blaOXA-58 in Acinetobacter spp. in China. METHODOLOGY/PRINCIPAL FINDINGS: Twelve non-duplicated blaOXA-58-harboring Acinetobacter spp. isolates were collected from six hospitals in five different cities between 2005 and 2010. The molecular epidemiology of the isolates was carried out using PFGE and multilocus sequence typing. Carbapenemase-encoding genes and plasmid replicase genes were identified by PCR. The genetic location of blaOXA-58 was analyzed using S1-nuclease method. Plasmid conjugation and electrotransformation were performed to evaluate the transferability of blaOXA-58-harboring plasmids. The genetic structure surrounding blaOXA-58 was determined by cloning experiments. The twelve isolates included two Acinetobacter pittii isolates (belong to one pulsotype, three Acinetobacter nosocomialis isolates (belong to two pulsotypes and seven Acinetobacter baumannii isolates (belong to two pulsotypes/sequence types. A. baumannii ST91 was found to be a potential multidrug resistant risk clone carrying both blaOXA-58 and blaOXA-23. blaOXA-58 located on plasmids varied from ca. 52 kb to ca. 143 kb. All plasmids can be electrotransformed to A. baumannii recipient, but were untypeable by the current replicon typing scheme. A novel plasmid replicase named repAci10 was identified in blaOXA-58-harboring plasmids of two A. pittii isolates, three A. nosocomialis isolates and two A. baumannii isolates. Four kinds of genetic contexts of blaOXA-58 were identified. The transformants of plasmids with structure of IS6 family insertion sequence (ISOur1, IS1008 or IS15-ΔISAba3-like element-blaOXA-58 displayed carbapenem nonsusceptible, while others with structure of intact ISAba3-like element-bla

  1. The emerge of a new superbug gene blaNDM-1

    Institute of Scientific and Technical Information of China (English)

    Wang Kaiji

    2011-01-01

    @@ NDM-- 1 in detail: NDM-1, which is the abbreviation of 'New Delhi metallo-beta-lactamase', is a recently dis-covered enzyme that is produced by some gram-negative Enterobaeteriaceae such as E coil (Esehe-riehia toll) and Klebsiella pneumonia.It is named after 'New Delhi', which is the capital of India, be-cause the first patient who was diagnosed to be colo-nized by bacteria with blaNDM-1 gene had gone toa hospital in New Delhi for cosmetic surgery not long before he was diagnosed.

  2. Improving Knowledge and Process for International Emergency Medicine Fellowship Applicants: A Call for a Uniform Application

    Directory of Open Access Journals (Sweden)

    Gabrielle A. Jacquet

    2013-01-01

    Full Text Available Background. There are currently 34 International Emergency Medicine (IEM fellowship programs. Applicants and programs are increasing in number and diversity. Without a standardized application, applicants have a difficulty approaching programs in an informed and an organized method; a streamlined application system is necessary. Objectives. To measure fellows’ knowledge of their programs’ curricula prior to starting fellowship and to determine what percent of fellows and program directors would support a universal application system. Methods. A focus group of program directors, recent, and current fellows convened to determine the most important features of an IEM fellowship application process. A survey was administered electronically to a convenience sample of 78 participants from 34 programs. Respondents included fellowship directors, fellows, and recent graduates. Results. Most fellows (70% did not know their program’s curriculum prior to starting fellowship. The majority of program directors and fellows support a uniform application service (81% and 67%, resp. and deadline (85% for both. A minority of program directors (35% and fellows (30% support a formal match. Conclusions. Program directors and fellows support a uniform application service and deadline, but not a formalized match. Forums for disseminating IEM fellowship information and for administering a uniform application service and deadline are currently in development to improve the process.

  3. Near net shape processing: A necessity for advanced materials applications

    Science.gov (United States)

    Kuhn, Howard A.

    1993-01-01

    High quality discrete parts are the backbones for successful operation of equipment used in transportation, communication, construction, manufacturing, and appliances. Traditional shapemaking for discrete parts is carried out predominantly by machining, or removing unwanted material to produce the desired shape. As the cost and complexity of modern materials escalates, coupled with the expense and environmental hazards associated with handling of scrap, it is increasingly important to develop near net shape processes for these materials. Such processes involve casting of liquid materials, consolidation of powder materials, or deformation processing of simple solid shapes into the desired shape. Frequently, several of these operations may be used in sequence to produce a finished part. The processes for near net shape forming may be applied to any type of material, including metals, polymers, ceramics, and their composites. The ability to produce shapes is the key to implementation of laboratory developments in materials science into real world applications. This seminar presents an overview of near net shapemaking processes, some application examples, current developments, and future research opportunities.

  4. Bacteriophages-potential for application in wastewater treatment processes

    Energy Technology Data Exchange (ETDEWEB)

    Withey, S. [School of Water Sciences, Cranfield University, Cranfield, Bedfordshire, MK43 0AL (United Kingdom); Cartmell, E. [School of Water Sciences, Cranfield University, Cranfield, Bedfordshire, MK43 0AL (United Kingdom)]. E-mail: e.cartmell@cranfield.ac.uk; Avery, L.M. [School of Water Sciences, Cranfield University, Cranfield, Bedfordshire, MK43 0AL (United Kingdom); Stephenson, T. [School of Water Sciences, Cranfield University, Cranfield, Bedfordshire, MK43 0AL (United Kingdom)

    2005-03-01

    Bacteriophages are viruses that infect and lyse bacteria. Interest in the ability of phages to control bacterial populations has extended from medical applications into the fields of agriculture, aquaculture and the food industry. Here, the potential application of phage techniques in wastewater treatment systems to improve effluent and sludge emissions into the environment is discussed. Phage-mediated bacterial mortality has the potential to influence treatment performance by controlling the abundance of key functional groups. Phage treatments have the potential to control environmental wastewater process problems such as: foaming in activated sludge plants; sludge dewaterability and digestibility; pathogenic bacteria; and to reduce competition between nuisance bacteria and functionally important microbial populations. Successful application of phage therapy to wastewater treatment does though require a fuller understanding of wastewater microbial community dynamics and interactions. Strategies to counter host specificity and host cell resistance must also be developed, as should safety considerations regarding pathogen emergence through transduction.

  5. Review of Matrix Decomposition Techniques for Signal Processing Applications

    Directory of Open Access Journals (Sweden)

    Monika Agarwal,

    2014-01-01

    Full Text Available Decomposition of matrix is a vital part of many scientific and engineering applications. It is a technique that breaks down a square numeric matrix into two different square matrices and is a basis for efficiently solving a system of equations, which in turn is the basis for inverting a matrix. An inverting matrix is a part of many important algorithms. Matrix factorizations have wide applications in numerical linear algebra, in solving linear systems, computing inertia, and rank estimation is an important consideration. This paper presents review of all the matrix decomposition techniques used in signal processing applications on the basis of their computational complexity, advantages and disadvantages. Various Decomposition techniques such as LU Decomposition, QR decomposition , Cholesky decomposition are discussed here. Keywords –

  6. Carbon nanotubes for interconnects process, design and applications

    CERN Document Server

    Dijon, Jean; Maffucci, Antonio

    2017-01-01

    This book provides a single-source reference on the use of carbon nanotubes (CNTs) as interconnect material for horizontal, on-chip and 3D interconnects. The authors demonstrate the uses of bundles of CNTs, as innovative conducting material to fabricate interconnect through-silicon vias (TSVs), in order to improve the performance, reliability and integration of 3D integrated circuits (ICs). This book will be first to provide a coherent overview of exploiting carbon nanotubes for 3D interconnects covering aspects from processing, modeling, simulation, characterization and applications. Coverage also includes a thorough presentation of the application of CNTs as horizontal on-chip interconnects which can potentially revolutionize the nanoelectronics industry. This book is a must-read for anyone interested in the state-of-the-art on exploiting carbon nanotubes for interconnects for both 2D and 3D integrated circuits. Provides a single-source reference on carbon nanotubes for interconnect applications; Includes c...

  7. Techniques of EMG signal analysis: detection, processing, classification and applications

    Science.gov (United States)

    Hussain, M.S.; Mohd-Yasin, F.

    2006-01-01

    Electromyography (EMG) signals can be used for clinical/biomedical applications, Evolvable Hardware Chip (EHW) development, and modern human computer interaction. EMG signals acquired from muscles require advanced methods for detection, decomposition, processing, and classification. The purpose of this paper is to illustrate the various methodologies and algorithms for EMG signal analysis to provide efficient and effective ways of understanding the signal and its nature. We further point up some of the hardware implementations using EMG focusing on applications related to prosthetic hand control, grasp recognition, and human computer interaction. A comparison study is also given to show performance of various EMG signal analysis methods. This paper provides researchers a good understanding of EMG signal and its analysis procedures. This knowledge will help them develop more powerful, flexible, and efficient applications. PMID:16799694

  8. Application of PLM processes to respond to mechanical SMEs needs

    CERN Document Server

    Duigou, Julien Le; Perry, Nicolas; Delplace, Jean-Charles

    2010-01-01

    PLM is today a reality for mechanical SMEs. Some companies implement PLM systems very well but others have more difficulties. This paper aims to explain why some SMEs do not success to integrated PLM systems analyzing the needs of mechanical SMEs, the processes to implement to respond to those needs and the actual PLM software functionalities. The proposition of a typology of those companies and the responses of those needs by PLM processes will be explain through the applications of a demonstrator applying appropriate generic data model and modelling framework.

  9. Non-linear thermodynamic laws application to soil processes

    Directory of Open Access Journals (Sweden)

    Ilgiz Khabirov

    2013-01-01

    Full Text Available An attempt has been made to analyze the possibility to use nonequilibrium thermodynamics for the soil dynamic open systemstreatment. Entropy change of such a system and the entropy coming from or going into the outer sphere. In the steady state, dynamic soil-formation processes occur within an organized structure and are characterized by stable parameters close to equilibrium. Accordingly, when examining soil, one can proceed from the conventional thermodynamic equilibrium. However, the matter of Onzager-Prigozhin general phenomenological theory applicability to soil processes is more complicated. To study soil stability it is necessary to go beyond the limits of linear thermodynamics.

  10. Low-Temperature Solution Processable Electrodes for Piezoelectric Sensors Applications

    Science.gov (United States)

    Tuukkanen, Sampo; Julin, Tuomas; Rantanen, Ville; Zakrzewski, Mari; Moilanen, Pasi; Lupo, Donald

    2013-05-01

    Piezoelectric thin-film sensors are suitable for a wide range of applications from physiological measurements to industrial monitoring systems. The use of flexible materials in combination with high-throughput printing technologies enables cost-effective manufacturing of custom-designed, highly integratable piezoelectric sensors. This type of sensor can, for instance, improve industrial process control or enable the embedding of ubiquitous sensors in our living environment to improve quality of life. Here, we discuss the benefits, challenges and potential applications of piezoelectric thin-film sensors. The piezoelectric sensor elements are fabricated by printing electrodes on both sides of unmetallized poly(vinylidene fluoride) film. We show that materials which are solution processable in low temperatures, biocompatible and environmental friendly are suitable for use as electrode materials in piezoelectric sensors.

  11. Genetic environments of the transferable plasmid-mediated blaCTX-M-3 gene in Serratia marcescens isolates.

    Science.gov (United States)

    Chu, Pei-Yu; Peng, Chien-Fang

    2014-01-01

    In this study, genetic environments of the transferable plasmid-mediated blaCTX-M-3 gene were characterized among 14 isolates of cefotaxime-resistant Serratia marcescens using PCR and BLAST DNA sequence analysis. A total of 3 types of genetic architectures in the regions surrounding this blaCTX-M-3 gene were identified. Type I architecture was characterized by the presence of a complete insertion sequence of tnpA-ISEcp1, identified as interrupting a reverse IS26 sequence in the upstream region of the blaCTX-M-3 gene. A reverse-directional orf477 fragment was located downstream of the blaCTX-M-3 gene, which was in the same direction of the mucA gene. A common region containing the orf513 element was located upstream of the mucA gene. Moreover, a copy of the 3'-CS2 element was located immediately upstream of the orf513 element. A novel complex class 1 integron was characterized by the presence of the dfrA19 gene, which was flanked by two copies of class 1 integrons. This is the first report to describe the dfrA19 gene within a novel complex class 1 integron in S. marcescens isolates from Taiwan. This novel complex class 1 integron structure was located distantly upstream of the blaCTX-M-3 gene.

  12. Applications of Process Synthesis: Moving from Conventional Chemical Processes towards Biorefinery Processes

    DEFF Research Database (Denmark)

    Yuan, Zhihong; Chen, Bingzhen; Gani, Rafiqul

    2013-01-01

    Concerns about diminishing petroleum reserves, enhanced worldwide demand for fuels and fluctuations in the global oil market, together with climate change and national security have promoted many initiatives for exploring alternative, non-petroleum based processes. Among these initiatives...... on petroleum-derive fuels....

  13. Intelligent Computational Systems. Opening Remarks: CFD Application Process Workshop

    Science.gov (United States)

    VanDalsem, William R.

    1994-01-01

    This discussion will include a short review of the challenges that must be overcome if computational physics technology is to have a larger impact on the design cycles of U.S. aerospace companies. Some of the potential solutions to these challenges may come from the information sciences fields. A few examples of potential computational physics/information sciences synergy will be presented, as motivation and inspiration for the Improving The CFD Applications Process Workshop.

  14. Digital Light Processing update: status and future applications

    Science.gov (United States)

    Hornbeck, Larry J.

    1999-05-01

    Digital Light Processing (DLP) projection displays based on the Digital Micromirror Device (DMD) were introduced to the market in 1996. Less than 3 years later, DLP-based projectors are found in such diverse applications as mobile, conference room, video wall, home theater, and large-venue. They provide high-quality, seamless, all-digital images that have exceptional stability as well as freedom from both flicker and image lag. Marked improvements have been made in the image quality of DLP-based projection display, including brightness, resolution, contrast ratio, and border image. DLP-based mobile projectors that weighted about 27 pounds in 1996 now weight only about 7 pounds. This weight reduction has been responsible for the definition of an entirely new projector class, the ultraportable. New applications are being developed for this important new projection display technology; these include digital photofinishing for high process speed minilab and maxilab applications and DLP Cinema for the digital delivery of films to audiences around the world. This paper describes the status of DLP-based projection display technology, including its manufacturing, performance improvements, and new applications, with emphasis on DLP Cinema.

  15. Spatially variant morphological image processing: theory and applications

    Science.gov (United States)

    Bouaynaya, N.; Schonfeld, D.

    2006-01-01

    Originally, mathematical morphology was a theory of signal transformations which are invariant under Euclidean translations. An interest in the extension of mathematical morphology to spatially-variant (SV) operators has emerged due to the requirements imposed by numerous applications in adaptive signal (image) processing. This paper presents a general theory of spatially-variant mathematical morphology in the Euclidean space. We define the binary and gray-level spatially-variant basic morphological operators (i.e., erosion, dilation, opening and closing) and study their properties. We subsequently derive kernel representations for a large class of binary and gray-level SV operators in terms of the basic SV morphological operators. The theory of SV mathematical morphology is used to extend and analyze two important image processing applications: morphological image restoration and skeleton representation of binary images. For morphological image restoration, we obtain new realizations of adaptive median filters in terms of the basic SV morphological operators. For skeleton representation, we develop an algorithm to construct the optimal structuring elements, in the sense of minimizing the cardinality of the spatially-variant morphological skeleton representation. Experimental results show the power of the proposed theory of spatially-variant mathematical morphology in practical image processing applications.

  16. Processes and applications of silicon carbide nanocomposite fibers

    Energy Technology Data Exchange (ETDEWEB)

    Shin, D G; Cho, K Y; Riu, D H [Nanomaterials Team, Korea Institute of Ceramic Engineering and Technology, 233-5 Gasan-dong, Guemcheon-gu, Seoul 153-801 (Korea, Republic of); Jin, E J, E-mail: dhriu15@seoultech.ac.kr [Battelle-Korea Laborotary, Korea University, Anamdong, Seongbuk-gu, Seoul (Korea, Republic of)

    2011-10-29

    Various types of SiC such as nanowires, thin films, foam, and continuous fibers have been developed since the early 1980s, and their applications have been expanded into several new applications, such as for gas-fueled radiation heater, diesel particulate filter (DPF), ceramic fiber separators and catalyst/catalyst supports include for the military, aerospace, automobile and electronics industries. For these new applications, high specific surface area is demanded and it has been tried by reducing the diameter of SiC fiber. Furthermore, functional nanocomposites show potentials in various harsh environmental applications. In this study, silicon carbide fiber was prepared through electrospinning of the polycarbosilane (PCS) with optimum molecular weight distribution which was synthesized by new method adopting solid acid catalyst such as ZSM-5 and {gamma}-Al{sub 2}O{sub 3}. Functional elements such as aluminum, titanium, tungsten and palladium easily doped in the precursor fiber and remained in the SiC fiber after pyrolysis. The uniform SiC fibers were produced at the condition of spinning voltage over 20 kV from the PCS solution as the concentration of 1.3 g/ml in DMF/Toluene (3:7) and pyrolysis at 1200deg. C. Pyrolyzed products were processed into several interesting applications such as thermal batteries, hydrogen sensors and gas filters.

  17. Processes and applications of silicon carbide nanocomposite fibers

    Science.gov (United States)

    Shin, D. G.; Cho, K. Y.; Jin, E. J.; Riu, D. H.

    2011-10-01

    Various types of SiC such as nanowires, thin films, foam, and continuous fibers have been developed since the early 1980s, and their applications have been expanded into several new applications, such as for gas-fueled radiation heater, diesel particulate filter (DPF), ceramic fiber separators and catalyst/catalyst supports include for the military, aerospace, automobile and electronics industries. For these new applications, high specific surface area is demanded and it has been tried by reducing the diameter of SiC fiber. Furthermore, functional nanocomposites show potentials in various harsh environmental applications. In this study, silicon carbide fiber was prepared through electrospinning of the polycarbosilane (PCS) with optimum molecular weight distribution which was synthesized by new method adopting solid acid catalyst such as ZSM-5 and γ-Al2O3. Functional elements such as aluminum, titanium, tungsten and palladium easily doped in the precursor fiber and remained in the SiC fiber after pyrolysis. The uniform SiC fibers were produced at the condition of spinning voltage over 20 kV from the PCS solution as the concentration of 1.3 g/ml in DMF/Toluene (3:7) and pyrolysis at 1200°C. Pyrolyzed products were processed into several interesting applications such as thermal batteries, hydrogen sensors and gas filters.

  18. Road sign identification application using image processing and augmented reality

    Directory of Open Access Journals (Sweden)

    Nanditha Rasanjana

    2015-11-01

    Full Text Available Now days, Sri Lanka is a rapidly developing country in the world. With this regard, roads are developing in every area. Every year, many new vehicles are entering to the roads. People use roads for their transport requirements. The road signs boards are helped to control road traffic and accident. But today, road accidents are increasing   rapidly. Most people are getting injured. Some people lost their life due to accidents. So many properties are damaged. Therefore, lives, properties, time and money are lost. A main reason of road accidents is a lack of knowledge about road signs and rules. To overcome this problem, “the developed team” has developed a learning Android Mobile Application. It is named “Mansalakuna”. This Mobile Application can be identified road signs using mobile phone camera. The road signs which focused by mobile phone camera, can be identified using the Image Processing Technology. Then, the mobile application is delivered full information about the road signs on user’s mobile phone screen for use the Augmented Reality Technology. The results can be delivered instantly to the user with specific rules, laws and regulations related for that road sign. Otherwise “Mansalakuna” mobile application can be used for learning mobile applications for passengers and drivers on the way. Countries like Sri Lanka, there are no complete above mention mobile applications package for the road users. Therefore, this Android Mobile Application is given a considerable support to users. It is a start to digital era to the road users.

  19. A putative multi-replicon plasmid co-harboring beta-lactamase genes blaKPC-2, blaCTX-M-14 and blaTEM-1 and trimethoprim resistance gene dfrA25 from a Klebsiella pneumoniae sequence type (ST) 11 strain in China

    Science.gov (United States)

    Tang, Yu; Shen, Pinghua; Liang, Wei; Jin, Jialin; Jiang, Xiaofei

    2017-01-01

    The global emergence of Klebsiella pneumoniae carbapenemase (KPC)-producing Klebsiella pneumoniae poses a major public health threat requiring immediate and aggressive action. Some older generation antibiotics, such as trimethoprim, serve as alternatives for treatment of infections. Here, we determined the complete nucleotide sequence of plasmid pHS091147, which co-harbored the carbapenemase (blaKPC-2) and trimethoprim resistance genes (dfrA25) from a Klebsiella pneumoniae sequence type (ST) 11 clone recovered in Shanghai, China. pHS091147 had three replication genes, several plasmid-stability genes and an intact type IV secretion system gene cluster. Besides blaKPC-2 and dfrA25, pHS091147 carried several other resistance genes, including β-lactamase genes blaTEM-1 and blaCTX-M-14, sulphonamide resistance gene sul1, a quinolone resistance gene remnant (ΔqnrB2), and virulence associated gene iroN. Notably, the multidrug-resistance region was a chimeric structure composed of three subregions, which shared strong sequence homology with several plasmids previously assigned in Genbank. To our knowledge, this is the first report of the co-localization of blaKPC-2 and dfrA25 on a novel putative multi-replicon plasmid in a Klebsiella pneumoniae ST11 clone. PMID:28152085

  20. Property Modelling for Applications in Chemical Product and Process Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    , polymers, mixtures as well as separation processes. The presentation will highlight the framework (ICAS software) for property modeling, the property models and issues such as prediction accuracy, flexibility, maintenance and updating of the database. Also, application issues related to the use of property......, they are not always available. Also, it may be too expensive to measure them or it may take too much time. In these situations and when repetitive calculations are involved (as in process simulation), it is useful to have appropriate models to reliably predict the needed properties. A collection of methods tools...... such as database, property model library, model parameter regression, and, property-model based product-process design will be presented. The database contains pure component and mixture data for a wide range of organic chemicals. The property models are based on the combined group contribution and atom...

  1. Stochasticity in processes fundamentals and applications to chemistry and biology

    CERN Document Server

    Schuster, Peter

    2016-01-01

    This book has developed over the past fifteen years from a modern course on stochastic chemical kinetics for graduate students in physics, chemistry and biology. The first part presents a systematic collection of the mathematical background material needed to understand probability, statistics, and stochastic processes as a prerequisite for the increasingly challenging practical applications in chemistry and the life sciences examined in the second part. Recent advances in the development of new techniques and in the resolution of conventional experiments at nano-scales have been tremendous: today molecular spectroscopy can provide insights into processes down to scales at which current theories at the interface of physics, chemistry and the life sciences cannot be successful without a firm grasp of randomness and its sources. Routinely measured data is now sufficiently accurate to allow the direct recording of fluctuations. As a result, the sampling of data and the modeling of relevant processes are doomed t...

  2. Classical and spatial stochastic processes with applications to biology

    CERN Document Server

    Schinazi, Rinaldo B

    2014-01-01

    The revised and expanded edition of this textbook presents the concepts and applications of random processes with the same illuminating simplicity as its first edition, but with the notable addition of substantial modern material on biological modeling. While still treating many important problems in fields such as engineering and mathematical physics, the book also focuses on the highly relevant topics of cancerous mutations, influenza evolution, drug resistance, and immune response. The models used elegantly apply various classical stochastic models presented earlier in the text, and exercises are included throughout to reinforce essential concepts. The second edition of Classical and Spatial Stochastic Processes is suitable as a textbook for courses in stochastic processes at the advanced-undergraduate and graduate levels, or as a self-study resource for researchers and practitioners in mathematics, engineering, physics, and mathematical biology. Reviews of the first edition: An appetizing textbook for a f...

  3. Virulence of Klebsiella pneumoniae isolates harboring bla KPC-2 carbapenemase gene in a Caenorhabditis elegans model.

    Directory of Open Access Journals (Sweden)

    Jean-Philippe Lavigne

    Full Text Available Klebsiella pneumoniae carbapenemase (KPC is a carbapenemase increasingly reported worldwide in Enterobacteriaceae. The aim of this study was to analyze the virulence of several KPC-2-producing K. pneumoniae isolates. The studied strains were (i five KPC-2 clinical strains from different geographical origins, belonging to different ST-types and possessing plasmids of different incompatibility groups; (ii seven transformants obtained after electroporation of either these natural KPC plasmids or a recombinant plasmid harboring only the bla KPC-2 gene into reference strains K. pneumoniae ATCC10031/CIP53153; and (iii five clinical strains cured of plasmids. The virulence of K. pneumoniae isolates was evaluated in the Caenorhabditis elegans model. The clinical KPC producers and transformants were significantly less virulent (LT50: 5.5 days than K. pneumoniae reference strain (LT50: 4.3 days (p<0.01. However, the worldwide spread KPC-2 positive K. pneumoniae ST258 strains and reference strains containing plasmids extracted from K. pneumoniae ST258 strains had a higher virulence than KPC-2 strains belonging to other ST types (LT50: 5 days vs. 6 days, p<0.01. The increased virulence observed in cured strains confirmed this trend. The bla KPC-2 gene itself was not associated to increased virulence.

  4. Emergence of Acinetobacter baumannii ST730 carrying the bla OXA-72 gene in Brazil

    Science.gov (United States)

    Pagano, Mariana; Rozales, Franciéli P; Bertolini, Diego; Rocha, Lisiane; Sampaio, Jorge LM; Barth, Afonso L; Martins, Andreza F

    2016-01-01

    Over the last decade, Acinetobacter baumannii resistant to carbapenems has emerged in many medical centres and has been commonly associated with high morbimortality. In Brazil, this resistance is mainly attributed to the spread of OXA-23-producing clones and, to a lesser extent, to OXA-143-producing clones. Here, we describe, for the first time, two OXA-72-producing A. baumannii isolates in southern Brazil to a broad spectrum of antibiotics, except polymyxin B and tigecycline. Molecular typing by multilocus sequence typing (MLST) demonstrated that both OXA-72-producing isolates belong to a new sequence type (ST), ST730, which was recently identified in OXA-23-producing A. baumannii isolates in São Paulo, Brazil. We demonstrate that the two A. baumannii ST730 isolates carrying blaOXA-72share a common ancestral origin with the blaOXA-23producers in Brazil. This observation reinforces the importance of strain-typing methods in order to clarify the dynamics of the emergence of new clones in a geographic region. PMID:27653364

  5. The role of the genetic elements bla oxa and IS Aba 1 in the Acinetobacter calcoaceticus-Acinetobacter baumannii complex in carbapenem resistance in the hospital setting

    Directory of Open Access Journals (Sweden)

    Vanessa Cristine Kobs

    Full Text Available Abstract: INTRODUCTION: Members of the Acinetobacter genus are key pathogens that cause healthcare-associated infections, and they tend to spread and develop new antibiotic resistance mechanisms. Oxacillinases are primarily responsible for resistance to carbapenem antibiotics. Higher rates of carbapenem hydrolysis might be ascribed to insertion sequences, such as the ISAba1 sequence, near bla OXA genes. The present study examined the occurrence of the genetic elements bla OXA and ISAba1 and their relationship with susceptibility to carbapenems in clinical isolates of the Acinetobacter calcoaceticus-Acinetobacter baumannii complex. METHODS: Isolates identified over 6 consecutive years in a general hospital in Joinville, Southern Brazil, were evaluated. The investigation of 5 families of genes encoding oxacillinases and the ISAba1 sequence location relative to bla OXA genes was conducted using polymerase chain reaction. RESULTS: All isolates presented the bla OXA-51-like gene (n = 78, and 91% tested positive for the bla OXA-23-like gene (n = 71. The presence of ISAba1 was exclusively detected in isolates carrying the bla OXA-23-like gene. All isolates in which ISAba1 was found upstream of the bla OXA-23-like gene (n = 69 showed resistance to carbapenems, whereas the only isolate in which ISAba1 was not located near the bla OXA-23-like gene was susceptible to carbapenems. The ISAba1 sequence position of another bla OXA-23-like-positive isolate was inconclusive. The isolates exclusively carrying the bla OXA-51-like gene (n = 7 showed susceptibility to carbapenems. CONCLUSIONS: The presence of the ISAba1 sequence upstream of the bla OXA-23-like gene was strongly associated with carbapenem resistance in isolates of the A. calcoaceticus-A. baumannii complex in the hospital center studied.

  6. Molecular typing and genetic environment of the blaKPC gene in Chilean isolates of Klebsiella pneumoniae.

    Science.gov (United States)

    Barría-Loaiza, Carla; Pincheira, Andrea; Quezada, Mario; Vera, Alejandra; Valenzuela, Pedro; Domínguez, Mariana; Lima, Celia A; Araya, Ingrid; Araya, Pamela; Prat, Soledad; Aguayo, Carolina; Fernández, Jorge; Hormazábal, Juan Carlos; Bello-Toledo, Helia; González-Rocha, Gerardo

    2016-03-01

    The aim of this work was to determine the genetic environment and transferability of blaKPC as well as the pulsotypes of KPC-producing Klebsiella pneumoniae strains isolated from clinical samples in Chilean hospitals. Seventeen strains, principally isolated in Santiago (the capital of Chile) during the years 2012 and 2013, were included. The genetic environment of blaKPC was elucidated by PCR mapping and sequencing. Molecular typing was performed by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). Curing and conjugation experiments were performed with six strains of different sequence types (STs) and pulsotypes. Thirteen pulsotypes and six STs, mainly belonging to clonal complex 258, were found. In addition, seven strains belonged to a new ST assigned ST1161. The blaKPC sequence indicated that 16 strains had the KPC-2 variant; in only one strain (UC331) an amino acid change (R6P) was detected, corresponding to a new KPC variant designated KPC-24. Molecular characterisation of the blaKPC genetic environment revealed two distinct platforms, namely variant 1a and the Tn4401a isoform, with the first being the most common (11/17 strains). Mating experiments failed to produce transconjugants; however, loss of blaKPC was achieved by plasmid curing in all assayed strains. In conclusion, in Chilean strains of K. pneumoniae, blaKPC is primarily found associated with the variant 1a and is located in non-transferable plasmids. In addition, this study highlights the description of the new ST1161 and the new KPC-24 variant.

  7. Big Bicycle Data Processing: from Personal Data to Urban Applications

    Science.gov (United States)

    Pettit, C. J.; Lieske, S. N.; Leao, S. Z.

    2016-06-01

    Understanding the flows of people moving through the built environment is a vital source of information for the planners and policy makers who shape our cities. Smart phone applications enable people to trace themselves through the city and these data can potentially be then aggregated and visualised to show hot spots and trajectories of macro urban movement. In this paper our aim is to develop procedures for cleaning, aggregating and visualising human movement data and translating this into policy relevant information. In conducting this research we explore using bicycle data collected from a smart phone application known as RiderLog. We focus on the RiderLog application initially in the context of Sydney, Australia and discuss the procedures and challenges in processing and cleaning this data before any analysis can be made. We then present some preliminary map results using the CartoDB online mapping platform where data are aggregated and visualised to show hot spots and trajectories of macro urban movement. We conclude the paper by highlighting some of the key challenges in working with such data and outline some next steps in processing the data and conducting higher volume and more extensive analysis.

  8. Processing, properties, and applications of sol-gel silica optics

    Science.gov (United States)

    Nogues, Jean-Luc R.; LaPaglia, Anthony J.

    1989-12-01

    For many years the market share maintained by U.S. optics manufacturers has been declining continuously caused in part by intense competition principally from countries in the Far East, and in part by the lack of a highly trained cadre of opticians to replace the current generation. This fact could place in jeopardy the defense system of the United States in case of international war. For example, in 1987, optical glass component imports accounted for approximately 50 percent of the Department of Defense (DOD) consumption. GELTECH's sol-gel technology is a new process for making a high quality optical glass and components for commercial and military uses. This technology offers in addition to being a local source of optics, the possibility to create new materials for high-tech optical applications, and the elimination of the major part of grinding and polishing for which the skill moved off-shore. This paper presents a summary of the solgel technology for the manufacture of high quality optical glass and components. Properties of pure silica glass made by solgel process (Type V and Type VI silicas) are given and include: ultraviolet, visible and near infrared spectrophotometry, optical homogeneity and thermal expansion. Many applications such as near net shape casting or Fresnel lens surface replication are discussed. Several potential new applications offered by the solgel technology such as organic-inorganic composites for non linear optics or scintillation detection are also reported in this paper.

  9. Distributed, Modular, Network Enabled Architecture For Process Control Military Applications

    Directory of Open Access Journals (Sweden)

    Abhijit Kamble*,

    2014-02-01

    Full Text Available In process control world, use of distributed modular embedded controller architecture drastically reduces the number and complexity of cabling; at the same time increases the system computing performance and response for real time application as compared to centralized control system. We propose a design based on ARM Cortex M4 hardware architecture and Cortex Microcontroller Software Interface Standard (CMSIS based software development. The ARM Cortex-M series ensures a compatible target processor and provides common core peripherals whereas CMSIS abstraction layer reduces development time, helps design software reusability and provides seamless application software interface for controllers. Being a custom design, we can built features like Built-In Test Equipment (BITE, single point fault tolerance, redundancy, 2/3 logic, etc. which are more desirable for a military applications. This paper describes the design of a generic embedded hardware module that can be configured as local I/O controller or application controller or Man Machine Interface (MMI. This paper also proposes a philosophy for step by step hardware and software development.

  10. Sequence and expression of Acinetobacter baumannii blaNDM-1 gene%鲍曼不动杆菌blaNDM-1基因序列分析及表达

    Institute of Scientific and Technical Information of China (English)

    陈硕; 冯书章; 邱少富; 夏力亮; 王中强; 刘军; 柳楠; 祝令伟; 孙洋; 宋宏彬

    2012-01-01

    目的 研究NDM-1鲍曼不动杆菌厦门分离株耐药性产生的分子机制.方法 Vitek32测定耐药谱.根据GenBank发表blaNDM-1基因序列设计合成引物,利用PCR技术扩增NDM-1鲍曼不动杆菌的blaNDM-1结构基因及其上下游调控序列片段,连接T载体,转化至大肠杆菌E.coli DH5α,序列测定并进行BLAST分析比对.测定始发菌株与重组菌株对美洛培南的最小抑菌浓度.结果 药敏试验结果 显示,该菌株对碳青霉烯类及β-内酰胺类抗生素耐药.NDM-1鲍曼不动杆菌厦门分离株blaNDM-1基因与HK-01同源性为100%;与KP-05-506相比,在blaNDM-1和trpF之间有24 bp的插入.美洛培南最小抑菌浓度测定结果 表明,重组菌株E.coli DH5α(pMD18-T::blaNDM-1)MIC值比始发菌株E.coli DH5α升高256倍.结论 获得blaNDM-1基因的大肠杆菌能够表达碳青霉烯酶,该基因是碳青霉烯类抗生素耐药性产生的分子基础,该基因具有跨种水平传播的可能.%The emergence of plasmid-mediated carbapenemases, such as NDM-1 in Enlerobacleriaceae is a major public health issue. The first NDM-1 producing AcineLobacLer baiunannii isolated in Xiamen was characterized. Antibiotic susceptibility was assessed with Vitek32. The A. Baiunannii earring NDM-1 was resistant to carbapenems and |3-lactam antibiotics· And remained susceptible to aminoglycosides and flluoroquinolones. Gene transfer to E. Coli recipient was investigated by using PCR and transformation. Sequence analysis of blaNDM-1 encoding the metallo-fHactamase indicated that the blaNDM-1 of NDM-1 A. Baiunannii was 100% homology with E. Coli HK-01 from Hong Kong. And there was a 24bp insert sequence between blaNDM-1 and LrpF when compared with K. Pneumoniae KP-05-506 from India. Minimum inhibitory concentration (MIC) of the recombination strain E. Coli DH5a (pMD18-T: blaNDM-1 ) was increased 256 times more than E. Coli DH5a to meropenem. The result suggests that the E. Coli acquired the blaNDM-1 could express

  11. Applications of Ecological Engineering Remedies for Uranium Processing Sites, USA

    Energy Technology Data Exchange (ETDEWEB)

    Waugh, William [Navarro Research and Engineering

    2016-05-23

    The U.S. Department of Energy (USDOE) is responsible for remediation of environmental contamination and long-term stewardship of sites associated with the legacy of nuclear weapons production during the Cold War in the United States. Protection of human health and the environment will be required for hundreds or even thousands of years at many legacy sites. USDOE continually evaluates and applies advances in science and technology to improve the effectiveness and sustainability of surface and groundwater remedies (USDOE 2011). This paper is a synopsis of ecological engineering applications that USDOE is evaluating to assess the effectiveness of remedies at former uranium processing sites in the southwestern United States. Ecological engineering remedies are predicated on the concept that natural ecological processes at legacy sites, once understood, can be beneficially enhanced or manipulated. Advances in tools for characterizing key processes and for monitoring remedy performance are demonstrating potential. We present test cases for four ecological engineering remedies that may be candidates for international applications.

  12. Evaluating Adult's Competency: Application of the Competency Assessment Process.

    Science.gov (United States)

    Giroux, Dominique; Tétreault, Sylvie; Landry, Marie-Pier

    2015-01-01

    Competency assessment of adults with cognitive impairment or mental illness is a complex process that can have significant consequences for their rights. Some models put forth in the scientific literature have been proposed to guide health and social service professionals with this assessment process, but none of these appear to be complete. A new model, the Competency Assessment Process (CAP), was presented and validated in other studies. This paper adds to this corpus by presenting both the CAP model and the results of a survey given to health and social service professionals on its practical application in their clinical practice. The survey was administered to 35 participants trained in assessing competency following the CAP model. The results show that 40% of participants use the CAP to guide their assessment and the majority of those who do not yet use it plan to do so in the future. A large majority of participants consider this to be a relevant model and believe that all interdisciplinary teams should use it. These results support the relevance of the CAP model. Further research is planned to continue the study of the application of CAP in healthcare facilities.

  13. Large Coaxial Coldfinger Ptc for Process Liquefaction and Hts Applications

    Science.gov (United States)

    Spoor, P. S.; Corey, J. A.

    2010-04-01

    Large (>100 W cooling capacity at 80 K) `pulse-tube' coolers are ideal candidates for emerging applications such as HTS transmission lines, transformers, and motor windings, meso-scale oxygen liquefaction on-demand, cryopumping, and cryogen boiloff recovery. A number of successful large `in-line' pulse-tube coolers have been built, but these require embedded shell-and-tube process heat exchangers, hence transport of the process fluid/gas to and from the coldhead, and often a high degree of process fluid purity, to avoid clogging in the narrow inlets and outlets of these heat exchangers. It is far preferable in most circumstances to have a coldfinger design that presents a salient cold tip, with the coldhead at the end of a flexible transfer line, as is done with Gifford-McMahon or Joule-Thomson coolers. This paper presents some design details and data from the development of our first high-capacity coldfinger, as well as the results of its application to a 55 gallon/day oxygen liquefier for the Navy.

  14. Nonlinear fiber applications for ultrafast all-optical signal processing

    Science.gov (United States)

    Kravtsov, Konstantin

    In the present dissertation different aspects of all-optical signal processing, enabled by the use of nonlinear fibers, are studied. In particular, we focus on applications of a novel heavily GeO2-doped (HD) nonlinear fiber, that appears to be superior to many other types of nonlinear fibers because of its high nonlinearity and suitability for the use in nonlinear optical loop mirrors (NOLMs). Different functions, such as all-optical switching, thresholding, and wavelength conversion, are demonstrated with the HD fibers in the NOLM configuration. These basic functions are later used for realization of ultrafast time-domain demultiplexers, clock recovery, detectors of short pulses in stealth communications, and primitive elements for analog computations. Another important technology that benefits from the use of nonlinear fiber-based signal processing is optical code-division multiple access (CDMA). It is shown in both theory and experiment that all-optical thresholding is a unique way of improving existing detection methods for optical CDMA. Also, it is the way of implementation of true asynchronous optical spread-spectrum networks, which allows full realization of optical CDMA potential. Some aspects of quantum signal processing and manipulation of quantum states are also studied in this work. It is shown that propagation and collisions of Thirring solitons lead to a substantial squeezing of quantum states, which may find applications for generation of squeezed light.

  15. A survey of decontamination processes applicable to DOE nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L.; Chamberlain, D.B.; Conner, C.; Vandegrift, G.F.

    1997-05-01

    The objective of this survey was to select an appropriate technology for in situ decontamination of equipment interiors as part of the decommissioning of U.S. Department of Energy nuclear facilities. This selection depends on knowledge of existing chemical decontamination methods. This report provides an up-to-date review of chemical decontamination methods. According to available information, aqueous systems are probably the most universally used method for decontaminating and cleaning metal surfaces. We have subdivided the technologies, on the basis of the types of chemical solvents, into acid, alkaline permanganate, highly oxidizing, peroxide, and miscellaneous systems. Two miscellaneous chemical decontamination methods (electrochemical processes and foam and gel systems) are also described. A concise technical description of various processes is given, and the report also outlines technical considerations in the choice of technologies, including decontamination effectiveness, waste handing, fields of application, and the advantages and limitations in application. On the basis of this survey, six processes were identified for further evaluation. 144 refs., 2 tabs.

  16. Processing Techniques and Applications of Silk Hydrogels in Bioengineering

    Directory of Open Access Journals (Sweden)

    Michael Floren

    2016-09-01

    Full Text Available Hydrogels are an attractive class of tunable material platforms that, combined with their structural and functional likeness to biological environments, have a diversity of applications in bioengineering. Several polymers, natural and synthetic, can be used, the material selection being based on the required functional characteristics of the prepared hydrogels. Silk fibroin (SF is an attractive natural polymer for its excellent processability, biocompatibility, controlled degradation, mechanical properties and tunable formats and a good candidate for the fabrication of hydrogels. Tremendous effort has been made to control the structural and functional characteristic of silk hydrogels, integrating novel biological features with advanced processing techniques, to develop the next generation of functional SF hydrogels. Here, we review the several processing methods developed to prepare advanced SF hydrogel formats, emphasizing a bottom-up approach beginning with critical structural characteristics of silk proteins and their behavior under specific gelation environments. Additionally, the preparation of SF hydrogel blends and other advanced formats will also be discussed. We conclude with a brief description of the attractive utility of SF hydrogels in relevant bioengineering applications.

  17. Processing Techniques and Applications of Silk Hydrogels in Bioengineering

    Science.gov (United States)

    Floren, Michael; Migliaresi, Claudio; Motta, Antonella

    2016-01-01

    Hydrogels are an attractive class of tunable material platforms that, combined with their structural and functional likeness to biological environments, have a diversity of applications in bioengineering. Several polymers, natural and synthetic, can be used, the material selection being based on the required functional characteristics of the prepared hydrogels. Silk fibroin (SF) is an attractive natural polymer for its excellent processability, biocompatibility, controlled degradation, mechanical properties and tunable formats and a good candidate for the fabrication of hydrogels. Tremendous effort has been made to control the structural and functional characteristic of silk hydrogels, integrating novel biological features with advanced processing techniques, to develop the next generation of functional SF hydrogels. Here, we review the several processing methods developed to prepare advanced SF hydrogel formats, emphasizing a bottom-up approach beginning with critical structural characteristics of silk proteins and their behavior under specific gelation environments. Additionally, the preparation of SF hydrogel blends and other advanced formats will also be discussed. We conclude with a brief description of the attractive utility of SF hydrogels in relevant bioengineering applications. PMID:27649251

  18. Powder consolidation using cold spray process modeling and emerging applications

    CERN Document Server

    Moridi, Atieh

    2017-01-01

    This book first presents different approaches to modeling of the cold spray process with the aim of extending current understanding of its fundamental principles and then describes emerging applications of cold spray. In the coverage of modeling, careful attention is devoted to the assessment of critical and erosion velocities. In order to reveal the phenomenological characteristics of interface bonding, severe, localized plastic deformation and material jet formation are studied. Detailed consideration is also given to the effect of macroscopic defects such as interparticle boundaries and subsequent splat boundary cracking on the mechanical behavior of cold spray coatings. The discussion of applications focuses in particular on the repair of damaged parts and additive manufacturing in various disciplines from aerospace to biomedical engineering. Key aspects include a systematic study of defect shape and the ability of cold spray to fill the defect, examination of the fatigue behavior of coatings for structur...

  19. Classification, processing and application of hydrogels: A review.

    Science.gov (United States)

    Ullah, Faheem; Othman, Muhammad Bisyrul Hafi; Javed, Fatima; Ahmad, Zulkifli; Md Akil, Hazizan

    2015-12-01

    This article aims to review the literature concerning the choice of selectivity for hydrogels based on classification, application and processing. Super porous hydrogels (SPHs) and superabsorbent polymers (SAPs) represent an innovative category of recent generation highlighted as an ideal mould system for the study of solution-dependent phenomena. Hydrogels, also termed as smart and/or hungry networks, are currently subject of considerable scientific research due to their potential in hi-tech applications in the biomedical, pharmaceutical, biotechnology, bioseparation, biosensor, agriculture, oil recovery and cosmetics fields. Smart hydrogels display a significant physiochemical change in response to small changes in the surroundings. However, such changes are reversible; therefore, the hydrogels are capable of returning to its initial state after a reaction as soon as the trigger is removed.

  20. High Throughput Multispectral Image Processing with Applications in Food Science.

    Directory of Open Access Journals (Sweden)

    Panagiotis Tsakanikas

    Full Text Available Recently, machine vision is gaining attention in food science as well as in food industry concerning food quality assessment and monitoring. Into the framework of implementation of Process Analytical Technology (PAT in the food industry, image processing can be used not only in estimation and even prediction of food quality but also in detection of adulteration. Towards these applications on food science, we present here a novel methodology for automated image analysis of several kinds of food products e.g. meat, vanilla crème and table olives, so as to increase objectivity, data reproducibility, low cost information extraction and faster quality assessment, without human intervention. Image processing's outcome will be propagated to the downstream analysis. The developed multispectral image processing method is based on unsupervised machine learning approach (Gaussian Mixture Models and a novel unsupervised scheme of spectral band selection for segmentation process optimization. Through the evaluation we prove its efficiency and robustness against the currently available semi-manual software, showing that the developed method is a high throughput approach appropriate for massive data extraction from food samples.

  1. Plasma process optimization for N-type doping applications

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Deven; Persing, Harold; Salimian, Siamak; Lacey, Kerry; Qin Shu; Hu, Jeff Y.; McTeer, Allen [Applied Materials, Inc., Varian Semiconductor Business Unit, 35 Dory Road, Gloucester, MA 01930 (United States); Micron Technology, Inc., 8000 S. Federal Way, Boise, ID 83707 (United States)

    2012-11-06

    Plasma doping (PLAD) has been adopted across the implant technology space and into high volume production for both conventional DRAM and NAND doping applications. PLAD has established itself as an alternative to traditional ion implantation by beamline implantation. The push for high doping concentration, shallow doping depth, and conformal doping capability expand the need for a PLAD solution to meet such requirements. The unique doping profile and doping characteristics at high dose rates allow for PLAD to deliver a high throughput, differentiated solution to meet the demand of evolving transistor technology. In the PLAD process, ions are accelerated to the wafer as with a negative wafer bias applied to the wafer. Competing mechanisms, such as deposition, sputtering, and etching inherent in plasma doping require unique control and process optimization. In this work, we look at the distinctive process tool control and characterization features which enable an optimized doping process using n-type (PH{sub 3} or AsH{sub 3}) chemistries. The data in this paper will draw the relationship between process optimization through plasma chemistry study to the wafer level result.

  2. High Throughput Multispectral Image Processing with Applications in Food Science.

    Science.gov (United States)

    Tsakanikas, Panagiotis; Pavlidis, Dimitris; Nychas, George-John

    2015-01-01

    Recently, machine vision is gaining attention in food science as well as in food industry concerning food quality assessment and monitoring. Into the framework of implementation of Process Analytical Technology (PAT) in the food industry, image processing can be used not only in estimation and even prediction of food quality but also in detection of adulteration. Towards these applications on food science, we present here a novel methodology for automated image analysis of several kinds of food products e.g. meat, vanilla crème and table olives, so as to increase objectivity, data reproducibility, low cost information extraction and faster quality assessment, without human intervention. Image processing's outcome will be propagated to the downstream analysis. The developed multispectral image processing method is based on unsupervised machine learning approach (Gaussian Mixture Models) and a novel unsupervised scheme of spectral band selection for segmentation process optimization. Through the evaluation we prove its efficiency and robustness against the currently available semi-manual software, showing that the developed method is a high throughput approach appropriate for massive data extraction from food samples.

  3. Advances in statistical monitoring of complex multivariate processes with applications in industrial process control

    CERN Document Server

    Kruger, Uwe

    2012-01-01

    The development and application of multivariate statistical techniques in process monitoring has gained substantial interest over the past two decades in academia and industry alike.  Initially developed for monitoring and fault diagnosis in complex systems, such techniques have been refined and applied in various engineering areas, for example mechanical and manufacturing, chemical, electrical and electronic, and power engineering.  The recipe for the tremendous interest in multivariate statistical techniques lies in its simplicity and adaptability for developing monitoring applica

  4. Adhesives technology for electronic applications materials, processing, reliability

    CERN Document Server

    Licari, James J

    2011-01-01

    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book par

  5. Application of digital image processing techniques to astronomical imagery, 1979

    Science.gov (United States)

    Lorre, J. J.

    1979-01-01

    Several areas of applications of image processing to astronomy were identified and discussed. These areas include: (1) deconvolution for atmospheric seeing compensation; a comparison between maximum entropy and conventional Wiener algorithms; (2) polarization in galaxies from photographic plates; (3) time changes in M87 and methods of displaying these changes; (4) comparing emission line images in planetary nebulae; and (5) log intensity, hue saturation intensity, and principal component color enhancements of M82. Examples are presented of these techniques applied to a variety of objects.

  6. Selective CO Methanation Catalysts for Fuel Processing Applications

    Energy Technology Data Exchange (ETDEWEB)

    Dagle, Robert A.; Wang, Yong; Xia, Guanguang G.; Strohm, James J.; Holladay, Jamie D.; Palo, Daniel R.

    2007-07-15

    Abstract Selective CO methanation as a strategy for CO removal in micro fuel processing applications was investigated over Ru-based catalysts. Ru loading, pretreatment and reduction conditions, and choice of support were shown to affect catalyst activity, selectivity, and stability. Even operating at a gas-hourly-space-velocity as high as 13,500 hr-1, a 3%Ru/Al2O3 catalyst was able to lower CO in a reformate to less than 100 ppm over a wide temperature range from 240oC to 285 oC, while keeping hydrogen consumption below 10%.

  7. Application of ionizing radiation processing in biomedical engineering and microelectronics

    Energy Technology Data Exchange (ETDEWEB)

    Hongfej, H.; Jilan, W.

    1988-01-01

    The applied radiation chemistry has made great contributions to the development of polymeric industrial materials by the characteristics reaction means such as crosslinking, graft copolymerization and low-temperature or solid-phase polymerization, and become a important field on peaceful use of atomic energy. A brief review on the applications of ionizing radiation processing in biomedical engineering and microelectronics is presented. The examples of this technique were the studies on biocompatible and biofunctional polymers for medical use and on resists of lithography in microelectronics.

  8. Pulse Reversal PermAlloy Plating Process for MEMS Applications

    DEFF Research Database (Denmark)

    Smistrup, Kristian; Tang, Peter Torben; Møller, Per

    2007-01-01

    Nickel-iron, and especially Permalloy, plating has been knownand used for more than 40 years, but there are still severalproblems related to stability and maintenance that should beresolved. This paper presents a saccharine-free pulse reversalplating Permalloy electrolyte, which gives low......-stress deposits.We demonstrate selected MEMS applications of the electrolyte.The use of the strong complexing agent 5-sulfosalicylic acidallows for a photometric determination of the Fe3+-level in thebath and eliminate precipitates. This makes the electrolytesuitable as a Permalloy plating process used...

  9. Modelling and simulation of diffusive processes methods and applications

    CERN Document Server

    Basu, SK

    2014-01-01

    This book addresses the key issues in the modeling and simulation of diffusive processes from a wide spectrum of different applications across a broad range of disciplines. Features: discusses diffusion and molecular transport in living cells and suspended sediment in open channels; examines the modeling of peristaltic transport of nanofluids, and isotachophoretic separation of ionic samples in microfluidics; reviews thermal characterization of non-homogeneous media and scale-dependent porous dispersion resulting from velocity fluctuations; describes the modeling of nitrogen fate and transport

  10. Advanced electrical and electronics materials processes and applications

    CERN Document Server

    Gupta, K M

    2015-01-01

    This comprehensive and unique book is intended to cover the vast and fast-growing field of electrical and electronic materials and their engineering in accordance with modern developments.   Basic and pre-requisite information has been included for easy transition to more complex topics. Latest developments in various fields of materials and their sciences/engineering, processing and applications have been included. Latest topics like PLZT, vacuum as insulator, fiber-optics, high temperature superconductors, smart materials, ferromagnetic semiconductors etc. are covered. Illustrations and exa

  11. A software engineering process for safety-critical software application.

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-02-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the `correctness` of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author).

  12. First descriptions of blaKPC in Raoultella spp. (R. planticola and R. ornithinolytica): report from the SENTRY Antimicrobial Surveillance Program.

    Science.gov (United States)

    Castanheira, Mariana; Deshpande, Lalitagauri M; DiPersio, Joseph R; Kang, Julia; Weinstein, Melvin P; Jones, Ronald N

    2009-12-01

    Two strains of Raoultella planticola and one of Raoultella ornithinolytica showing carbapenem resistance were recovered from patients hospitalized in New Jersey and Ohio. All patients had received previous antimicrobial treatment, including carbapenems. These strains harbored bla(KPC-2) and bla(KPC-3). Carbapenemase genes were embedded in isoforms of Tn4401 and were plasmidic and chromosomal in location.

  13. Economic model predictive control theory, formulations and chemical process applications

    CERN Document Server

    Ellis, Matthew; Christofides, Panagiotis D

    2017-01-01

    This book presents general methods for the design of economic model predictive control (EMPC) systems for broad classes of nonlinear systems that address key theoretical and practical considerations including recursive feasibility, closed-loop stability, closed-loop performance, and computational efficiency. Specifically, the book proposes: Lyapunov-based EMPC methods for nonlinear systems; two-tier EMPC architectures that are highly computationally efficient; and EMPC schemes handling explicitly uncertainty, time-varying cost functions, time-delays and multiple-time-scale dynamics. The proposed methods employ a variety of tools ranging from nonlinear systems analysis, through Lyapunov-based control techniques to nonlinear dynamic optimization. The applicability and performance of the proposed methods are demonstrated through a number of chemical process examples. The book presents state-of-the-art methods for the design of economic model predictive control systems for chemical processes. In addition to being...

  14. Applications of Natural Language Processing in Biodiversity Science

    Directory of Open Access Journals (Sweden)

    Anne E. Thessen

    2012-01-01

    A computer can handle the volume but cannot make sense of the language. This paper reviews and discusses the use of natural language processing (NLP and machine-learning algorithms to extract information from systematic literature. NLP algorithms have been used for decades, but require special development for application in the biological realm due to the special nature of the language. Many tools exist for biological information extraction (cellular processes, taxonomic names, and morphological characters, but none have been applied life wide and most still require testing and development. Progress has been made in developing algorithms for automated annotation of taxonomic text, identification of taxonomic names in text, and extraction of morphological character information from taxonomic descriptions. This manuscript will briefly discuss the key steps in applying information extraction tools to enhance biodiversity science.

  15. Application of pulse combustion technology in spray drying process

    Directory of Open Access Journals (Sweden)

    I. Zbicinski

    2000-12-01

    Full Text Available The paper presents development of valved pulse combustor designed for application in drying process and drying tests performed in a specially built installation. Laser technique was applied to investigate the flow field and structure of dispersed phase during pulse combustion spray drying process. PDA technique was used to determine initial atomization parameters as well as particle size distribution, velocity of the particles, mass concentration of liquid phase in the cross section of spray stream, etc., in the drying chamber during drying tests. Water was used to estimate the level of evaporation and 5 and 10% solutions of sodium chloride to carry out drying tests. The Computational Fluid Dynamics technique was used to perform theoretical predictions of time-dependent velocity, temperature distribution and particle trajectories in the drying chamber. Satisfactory agreement between calculations and experimental results was found in certain regions of the drying chamber.

  16. Application of multifractal wavelet analysis to spontaneous fermentation processes

    CERN Document Server

    Ibarra-Junquera, V; Escalante-Minakata, P; Rosu, H C

    2007-01-01

    An algorithm is presented here to get more detailed information, of mixed culture type, based exclusively on the biomass concentrations data for fermentation processes. The analysis is performed having available only the on-line measurements of the redox potential. It is a two-step procedure which includes an Artificial Neural Network (ANN) that relates the redox potential to the biomass concentrations in the first step. Next, a multifractal wavelet analysis is performed using the biomass estimates of the process. In this context, our results show that the redox potential is a valuable indicator of microorganism metabolic activity during the spontaneous fermentation. In this paper, the detailed design of the multifractal wavelet analysis is presented, as well as its direct experimental application at the laboratory level

  17. Materials and processes for spacecraft and high reliability applications

    CERN Document Server

    D Dunn, Barrie

    2016-01-01

    The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Sp...

  18. Application of Anodization Process for Cast Aluminium Surface Properties Enhancement

    Directory of Open Access Journals (Sweden)

    Włodarczyk-Fligier A.

    2016-09-01

    Full Text Available An huge interest is observed in last years in metal matrix composite, mostly light metal based, which have found their applications in many industry branches, among others in the aircraft industry, automotive-, and armaments ones, as well as in electrical engineering and electronics, where one of the most important issue is related to the corrosion resistance, especially on the surface layer of the used aluminium alloys. This elaboration presents the influence of ceramic phase on the corrosion resistance, quality of the surface layer its thickness and structure of an anodic layer formed on aluminium alloys. As test materials it was applied the aluminium alloys Al-Si-Cu and Al-Cu-Mg, for which heat treatment processes and corrosion tests were carried out. It was presented herein grindability test results and metallographic examination, as well. Hardness of the treated alloys with those ones subjected to corrosion process were compared.

  19. Application of Ion Beam Processing Technology in Production of Catalysts

    Directory of Open Access Journals (Sweden)

    Mykola G. Bannikov, Javed A. Chattha

    2012-08-01

    Full Text Available In this paper, the applicability of Ion Beam Processing Technology for making catalysts has been inves-tigated. Ceramic substrates of different shapes and metal fibre tablets were implanted by platinum ions and tested in nitrogen oxides (NOx and carbon monoxide (CO conversion reactions. Effectiveness of the implanted catalysts was compared to that of the commercially produced platinum catalysts made by impregnation. Platinum-implanted catalyst having fifteen times less platinum content showed the same CO conversion efficiency as the commercially pro-duced catalyst. It was revealed that the effectiveness of the platinum-implanted catalyst has complex dependence on the process parameters and the optimum can be achieved by varying the ions energy and the duration of implantation. Investigation of the pore structure showed that ion implantation did not decrease the specific surface area of the catalyst.Key Words: Catalyst, Ion Implantation, Noble metals.

  20. Design of CAN Bus Application in the Process of Papermaking

    Directory of Open Access Journals (Sweden)

    Kaisheng Zhang

    2013-05-01

    Full Text Available In this study, we have a research of the design of can bus application in the process of papermaking. The design for an intelligent measure and control system based on the technology of CAN bus, is applied to detect and control the concentration of wood-pulp, the temperature of multistage dryer and other parameters in the process of papermaking, in order to meet the control requirements and characters for the study quality and ensure paper even and cohesive under the course of manufacturer. The intelligence of measure and control system has been predominantly researched in the article, including the proposal of intelligent control node and communication model, the design of hardware interface circuit in the intelligent measure and control node and the design of whole system.

  1. Moving bed biofilm reactor technology: process applications, design, and performance.

    Science.gov (United States)

    McQuarrie, James P; Boltz, Joshua P

    2011-06-01

    The moving bed biofilm reactor (MBBR) can operate as a 2- (anoxic) or 3-(aerobic) phase system with buoyant free-moving plastic biofilm carriers. These systems can be used for municipal and industrial wastewater treatment, aquaculture, potable water denitrification, and, in roughing, secondary, tertiary, and sidestream applications. The system includes a submerged biofilm reactor and liquid-solids separation unit. The MBBR process benefits include the following: (1) capacity to meet treatment objectives similar to activated sludge systems with respect to carbon-oxidation and nitrogen removal, but requires a smaller tank volume than a clarifier-coupled activated sludge system; (2) biomass retention is clarifier-independent and solids loading to the liquid-solids separation unit is reduced significantly when compared with activated sludge systems; (3) the MBBR is a continuous-flow process that does not require a special operational cycle for biofilm thickness, L(F), control (e.g., biologically active filter backwashing); and (4) liquid-solids separation can be achieved with a variety of processes, including conventional and compact high-rate processes. Information related to system design is fragmented and poorly documented. This paper seeks to address this issue by summarizing state-of-the art MBBR design procedures and providing the reader with an overview of some commercially available systems and their components.

  2. Applicability of anoxic-oxic process in treating petrochemical wastewater

    Institute of Scientific and Technical Information of China (English)

    Li-jun ZHAO; Fang MA; Jing-bo GUO

    2009-01-01

    To explore the applicability of anoxic-oxic (A/O) activated sludge process for petrochemical wastewater treatment, the relationship between bacterial community structure and pollutants loading/removal efficiencies was investigated by gas chromatograph-mass spectrometry (GC-MS), polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and other conventional techniques. It showed that when the concentrations of the influent chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) were 420~560 mg/L and 64~100 mg/L, respectively, the corresponding average effluent concentra-tions were 160 mg/L and 55 mg/L, which were 1.6 and 2.2 times higher than those of the national standards in China, respectively, demonstrating the inefficient performances of A/O process. Analysis of GC-MS indicated that refractory pollutants were mainly removed by sludge adsorption, but not by biodegradation. PCR-DGGE profile analysis suggested that the biological system was species-rich, but there was apparent succession of the bacterial community structure in different locations of the A/O system. Variations of bacterial community structure and pollutant Ioadings had obvious influences on pollutants removal efficiencies. Thus, A/O process was inapplicable for the treatment of complicated petrochemical wastewater, and strategies such as the reinforcement of pre-treatment and two-stage A/O process were suggested.

  3. Melt processing of bulk high Tc superconductors and their application

    Science.gov (United States)

    Murakami, M.; Oyama, T.; Fujimoto, H.; Gotoh, S.; Yamaguchi, K.

    1991-03-01

    The authors report a melt-powder-melt-growth (MPMG) process which results in high Jc for bulk Y-Ba-Cu-O superconductors. The Y-Ba-Cu-O pellets or powders are melt quenched. The quenched plates are crushed into powder and mixed well. The powder is then compacted into desired shapes, remelted, and slowly cooled in a thermal gradient. When the starting composition is changed from the 1:2:3 stoichiometry toward the Y2BaCuO5(211) rich region, the 211 inclusions can be dispersed in the YBa2Cu3O(x) matrix, which contributes to increases in both flux pinning force and fracture toughness. A Jc value exceeding 3 x 108 A/sq m has been achieved at 77 K and 1 T. Another attractive feature of the MPMG process is that other components such as fine Ag powders can be added during solid-state mixing. Fine dispersion of Ag particles can effectively reduce the amount of cracking. MPMG-processed Y-Ba-Cu-O with Ag doping can levitate a mass of 3-kg at 1-mm height using a repulsive force against a 0.4-T magnet. A noncontacting rotation device such as a magnetic bearing can be made utilizing bulk high-Jc materials. A superconducting permanent magnet is also a promising candidate for future application. MPMG-processed Y-Ba-Cu-O can generate 0.25 T at 77 K.

  4. Adaptive Signal Processing Testbed application software: User's manual

    Science.gov (United States)

    Parliament, Hugh A.

    1992-05-01

    The Adaptive Signal Processing Testbed (ASPT) application software is a set of programs that provide general data acquisition and minimal processing functions on live digital data. The data are obtained from a digital input interface whose data source is the DAR4000 digital quadrature receiver that receives a phase shift keying signal at 21.4 MHz intermediate frequency. The data acquisition software is used to acquire raw unprocessed data from the DAR4000 and store it on disk in the Sun workstation based ASPT. File processing utilities are available to convert the stored files for analysis. The data evaluation software is used for the following functions: acquisition of data from the DAR4000, conversion to IEEE format, and storage to disk; acquisition of data from the DAR4000, power spectrum estimation, and on-line plotting on the graphics screen; and processing of disk file data, power spectrum estimation, and display and/or storage to disk in the new format. A user's guide is provided that describes the acquisition and evaluation programs along with how to acquire, evaluate, and use the data.

  5. Fibers by interfacial polyelectrolyte complexation – processes, materials and applications

    Directory of Open Access Journals (Sweden)

    Andrew C.A. Wan

    2016-10-01

    Full Text Available Interfacial polyelectrolyte (polyion complexation (IPC is a process whereby fibers and capsules are formed through interactions at the interface of oppositely charged polymers. Since its discovery in the late 1990s, the IPC fiber process, in particular, has been investigated for various applications such as tissue engineering, drug delivery, flexible electronics and biosensing. The advent of the IPC fiber and process has been supported by its unique mechanism of formation that makes it amenable to encapsulation and functionalization. In this first review on IPC fibers, we consolidate the current knowledge of the IPC process, mechanism of fiber formation and fiber physical properties, while documenting the various polycation–polyanion pairs and encapsulants that have been used to date. We review the rapidly accumulating literature on IPC fibers for tissue engineering, describing how they have been used to release protein factors in a sustained manner, made into random or spatially well-defined scaffolds and decorated with appropriate functionalities and extracellular matrices in order to tailor the microenvironment for cell growth and function.

  6. Optimization of polyetherimide processing parameters for optical interconnect applications

    Science.gov (United States)

    Zhao, Wei; Johnson, Peter; Wall, Christopher

    2015-10-01

    ULTEM® polyetherimide (PEI) resins have been used in opto-electronic markets since the optical properties of these materials enable the design of critical components under tight tolerances. PEI resins are the material of choice for injection molded integrated lens applications due to good dimensional stability, near infrared (IR) optical transparency, low moisture uptake and high heat performance. In most applications, parts must be produced consistently with minimal deviations to insure compatibility throughout the lifetime of the part. With the large number of lenses needed for this market, injection molding has been optimized to maximize the production rate. These optimized parameters for high throughput may or may not translate to an optimized optical performance. In this paper, we evaluate and optimize PEI injection molding processes with a focus on optical property performance. A commonly used commercial grade was studied to determine factors and conditions which contribute to optical transparency, color, and birefringence. Melt temperature, mold temperature, injection speed and cycle time were varied to develop optimization trials and evaluate optical properties. These parameters could be optimized to reduce in-plane birefringence from 0.0148 to 0.0006 in this study. In addition, we have studied an optically smooth, sub-10nm roughness mold to re-evaluate material properties with minimal influence from mold quality and further refine resin and process effects for the best optical performance.

  7. Solution-processing of chalcogenide materials for device applications

    Science.gov (United States)

    Zha, Yunlai

    Chalcogenide glasses are well-known for their desirable optical properties, which have enabled many infrared applications in the fields of photonics, medicine, environmental sensing and security. Conventional deposition methods such as thermal evaporation, chemical vapor deposition, sputtering or pulse laser deposition are efficient for fabricating structures on flat surfaces. However, they have limitations in deposition on curved surfaces, deposition of thick layers and component integration. In these cases, solution-based methods, which involve the dissolution of chalcogenide glasses and processing as a liquid, become a better choice for their flexibility. After proper treatment, the associated structures can have similar optical, chemical and physical properties to the bulk. This thesis presents an in-depth study of solution-processing chalcogenide glasses, starting from the "solution state" to the "film state" and the "structure state". Firstly, chalcogenide dissolution is studied to reveal the mechanisms at molecular level and build a foundation for material processing. Dissolution processes for various chalcogenide solvent pairs are reviewed and compared. Secondly, thermal processing, in the context of high temperature annealing, is explained along with the chemical and physical properties of the annealed films. Another focus is on nanopore formation in propylamine-processed arsenic sulfide films. Pore density changes with respect to annealing temperatures and durations are characterized. Base on a proposed vacancy coalescence theory, we have identified new dissolution strategies and achieved the breakthrough of pore-free film deposition. Thirdly, several solution methods developed along with the associated photonic structures are demonstrated. The first example is "spin-coating and lamination", which produces thick (over 10 mum) chalcogenide structures. Both homogeneous thick chalcogenide structures and heterogeneous layers of different chalcogenide glasses

  8. Exploitation of Information Processing Technologies to Extend Digital Library Applications

    Directory of Open Access Journals (Sweden)

    Jian-Hua Yeh、Jia-Yanh Chang、Yen-Jen Oyan

    1999-04-01

    Full Text Available

    頁次:1-11

    This paper discusses exploitation of information processing technologies to extend digital library applications to a new dimension. The discussion focuses on the following three information processing technologies.

    l. information extraction.

    2. deductive inference.

    3. data mining.

    The most significant applications are discovery and derivation of new information and knowledge. This paper discusses how these information processing technologies can be exploited to complement the capabilities of human beings in the digital library domain. The tasks that the developed information processing utilities perform are simple and tedious intelligent information processing. However, because a digital library contains a large quantity of contents, it is common that human beings can hardly carry out such tasks exhaustively. As a result, a great amount of information and knowledge may remain undiscovered without the assistance of assistance of such utilities. On the other hands, with the developed information processing utilities, human being are the released form performing

  9. Radiation processing applications in the Czechoslovak water treatment technologies

    Science.gov (United States)

    Vacek, K.; Pastuszek, F.; Sedláček, M.

    The regeneration of biologically clogged water wells by radiation proved to be a successful and economically beneficial process among other promising applications of ionizing radiation in the water supply technology. The application conditions and experience are mentioned. The potential pathogenic Mycobacteria occuring in the warm washing and bathing water are resistant against usual chlorine and ozone concentrations. The radiation sensitivity of Mycobacteria allowed to suggest a device for their destroying by radiation. Some toxic substances in the underground water can be efficiently degraded by gamma radiation directly in the wells drilled as a hydraulic barrier surrounding the contaminated land area. Substantial decrease of CN - concentration and C.O.D. value was observed in water pumped from such well equipped with cobalt sources and charcoal. The removing of pathogenic contamination remains to be the main goal of radiation processing in the water purification technologies. The decrease of liquid sludge specific filter resistance and sedimentation acceleration by irradiation have a minor technological importance. The hygienization of sludge cake from the mechanical belt filter press by electron beam appears to be the optimum application in the Czechoslovak conditions. The potatoes and barley crop yields from experimental plots treated with sludge were higher in comparison with using the manure. Biological sludge from the municipal and food industry water purification plants contains nutritive components. The proper hygienization is a necessary condition for using them as a livestock feed supplement. Feeding experiments with broilers and pigs confirmed the possibility of partial (e.g. 50%) replacement of soya-, bone- or fish flour in feed mixtures by dried sludge hygienized either by heat or by the irradiation.

  10. Identificación genotípica de β-lactamasas de espectro espectro extendido (BLEE (blaTEM y blaSHV en Escherichia coli uropatógena

    Directory of Open Access Journals (Sweden)

    Yeffersson Grandas Franco

    2016-06-01

    Full Text Available Introducción: Las infecciones de tracto urinario (ITU son consideradas un problema de salud pública a nivel mundial debido a su incidencia y morbilidad. Entre los agentes causales que se aíslan con mayor frecuencia, se encuentra E. coli, con una prevalencia que va desde 40% al 95%. Actualmente, la problemática de las ITU ha venido en aumento, debido a la aparición de resistencia bacteriana a agentes antimicrobianos, influenciado por la presión selectiva, la preexistencia de genes de resistencia y el uso indiscriminado de antibióticos. Objetivo: Identificar molecularmente β-lactamasas de espectro extendido (blaTEM y blaSHV, en E. coli uropatógena, aislada en pacientes ambulatorios que asisten a un laboratorio clínico de tercer nivel de complejidad. Materiales y métodos: Estudio descriptivo de corte transversal. En este trabajo se estudiaron 250 cepas de las cuales 120 eran presuntivas de producir β-lactamasas de acuerdo al método de Kirby-bauer que se realizó años anteriores por el semillero de Inmunidad e Infección. Los genes de interés se amplificaron mediante PCR. Se utilizó Klebsiella pneumoniae ATCC 700603 como control positivo. Una vez amplificado el gen se llevó a cabo el corrido electroforético en gel de agarosa donde el producto amplificado fue de 470 pb en el caso de blaSHV y de 1080 pb para blaTEM. Los fenotipos compatibles con producción de β-lactamasas se analizaron por medio de distribución de frecuencia usando el software WHONET 5,6. La distribución de frecuencia de los genes analizados se calculó usando el software MedCalc versión 15.2.2 (Bélgica – Software BBVA. Resultados: De las cepas analizadas, el 52,8% portadoras del gen blaTEM y el 2,8% del gen blaSHV-2. Se encontró co-existencia de los genes blaSHV-2 y blaTEM en el 1,68% del total de las cepas. De todas las cepas presuntivas de producir BLEE (n=120, 94 fueron productoras de BLEE, lo que nos indicaría que las 21 cepas restantes, implementan

  11. Genotypic and Antimicrobial Susceptibility of Carbapenem-Resistant Acinetobacter baumannii: Analysis of ISAba Elements and blaOXA-23-like Genes Including A New Variant

    Directory of Open Access Journals (Sweden)

    Abbas eBahador

    2015-11-01

    Full Text Available Carbapenem-resistant Acinetobacter baumannii (CR-AB causes serious nosocomial infections, especially in ICU wards of hospitals, worldwide. Expression of blaOXA genes is the chief mechanism of conferring carbapenem resistance among CR-AB. Although some blaOXA genes have been studied among CR-AB isolates from Iran, their blaOXA-23-like genes have not been investigated. We used a multiplex-PCR to detect Ambler class A, B, and D carbapenemases of 85 isolates, and determined that 34 harbored blaOXA-23-like genes. Amplified fragment length polymorphism (AFLP genotyping, followed by DNA sequencing of blaOXA-23-like amplicons of CR-AB from each AFLP group was used to characterize their blaOXA-23-like genes. We also assessed the antimicrobial susceptibility pattern of CR-AB isolates, and tested whether they harbored insertion sequences ISAba1 and ISAba4. Sequence comparison with reference strain A. baumannii (NCTC12156 revealed five types of mutations in blaOXA-23-like genes; including one novel variant and four mutants that were already reported from China and the USA. All of the blaOXA-23-like genes mutations were associated with increased minimum inhibitory concentrations (MICs against imipenem. ISAba1 and ISAba4 sequences were detected upstream of blaOXA-23 genes in 19% and 7% of isolates, respectively. The isolation of CR-AB with new blaOXA-23 mutations including some that have been reported from the USA and China highlights CR-AB pervasive distribution, which underscores the importance of concerted national and global efforts to control the spread of CR-AB isolates worldwide.

  12. Rapid discrimination of Acinetobacter baumannii international clone II lineage by pyrosequencing SNP analyses of bla(OXA-51-like) genes.

    Science.gov (United States)

    Matsui, Mari; Suzuki, Satowa; Suzuki, Masato; Arakawa, Yoshichika; Shibayama, Keigo

    2013-08-01

    We found that Acinetobacter baumannii international clone II generally possesses unique GTA sequence at nucleotide positions 106-108 in the bla(OXA-51-like) genes. We exploited this to develop an easy and rapid method for discrimination of international clone II from other A. baumannii by employing pyrosequencing analyses of single nucleotide polymorphisms.

  13. Identification of Achromobacter xylosoxidans by detection of the bla(OXA-114-like) gene intrinsic in this species.

    Science.gov (United States)

    Turton, Jane F; Mustafa, Nazim; Shah, Jayesh; Hampton, Catherine V; Pike, Rachel; Kenna, Dervla T

    2011-07-01

    Achromobacter xylosoxidans is an emerging pathogen among patients with cystic fibrosis. Here we describe a specific PCR for identification of this organism, based on detection of bla(OXA-114-like). Comparison of isolates by pulsed-field gel electrophoresis revealed evidence of cross-infection in some cases, but most patients harbored their own strain.

  14. Application of statistical process control to qualitative molecular diagnostic assays.

    Directory of Open Access Journals (Sweden)

    Cathal P O'brien

    2014-11-01

    Full Text Available Modern pathology laboratories and in particular high throughput laboratories such as clinical chemistry have developed a reliable system for statistical process control. Such a system is absent from the majority of molecular laboratories and where present is confined to quantitative assays. As the inability to apply statistical process control to assay is an obvious disadvantage this study aimed to solve this problem by using a frequency estimate coupled with a confidence interval calculation to detect deviations from an expected mutation frequency. The results of this study demonstrate the strengths and weaknesses of this approach and highlight minimum sample number requirements. Notably, assays with low mutation frequencies and detection of small deviations from an expected value require greater samples with a resultant protracted time to detection. Modelled laboratory data was also used to highlight how this approach might be applied in a routine molecular laboratory. This article is the first to describe the application of statistical process control to qualitative laboratory data.

  15. Scaling limits for Hawkes processes and application to financial statistics

    CERN Document Server

    Bacry, Emmanuel; Hoffmann, Marc; Muzy, Jean François

    2012-01-01

    We prove a law of large numbers and a functional central limit theorem for multivariate Hawkes processes observed over a time interval $[0,T]$ in the limit $T \\rightarrow \\infty$. We further exhibit the asymptotic behaviour of the covariation of the increments of the components of a multivariate Hawkes process, when the observations are imposed by a discrete scheme with mesh $\\Delta$ over $[0,T]$ up to some further time shift $\\tau$. The behaviour of this functional depends on the relative size of $\\Delta$ and $\\tau$ with respect to $T$ and enables to give a full account of the second-order structure. As an application, we develop our results in the context of financial statistics. We introduced in a previous work a microscopic stochastic model for the variations of a multivariate financial asset, based on Hawkes processes and that is confined to live on a tick grid. We derive and characterise the exact macroscopic diffusion limit of this model and show in particular its ability to reproduce important empiric...

  16. Improving Packet Processing Performance of a Memory-Bounded Application

    CERN Document Server

    Schumacher, Jorn; The ATLAS collaboration; Borga, Andrea; Boterenbrood, Hendrik; Chen, Hucheng; Chen, Kai; Drake, Gary; Francis, David; Gorini, Benedetto; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Narevicius, Julia; Roich, Alexander; Ryu, Soo; Schreuder, Frans Philip; Vandelli, Wainer; Zhang, Jinlong; Vermeulen, Jos

    2015-01-01

    Experiments in high-energy physics (HEP) and related fields often impose constraints and challenges on data acquisition systems. As a result, these systems are implemented as unique mixtures of custom and commercial-off-the-shelf electronics (COTS), involving and connecting radiation-hard devices, large high-performance networks, and computing farms. FELIX, the Frontend Link Exchange, is a new PC-based general purpose data routing device for the data-acquisition system of the ATLAS experiment at CERN. Performance is a very crucial point for devices like FELIX, which have to be capable of processing tens of gigabyte of data per second. Thus it is important to understand the performance limitations for typical workloads on modern hardware. We present an analysis of a packet processing algorithm that is used in FELIX, and show how the PC system's memory architecture plays a key factor in the overall data throughput achieved by the application. Finally, we present optimizations that increase the processing throug...

  17. On Markovian traffic with applications to TES processes

    Directory of Open Access Journals (Sweden)

    David L. Jagerman

    1994-01-01

    Full Text Available Markov processes are an important ingredient in a variety of stochastic applications. Notable instances include queueing systems and traffic processes offered to them. This paper is concerned with Markovian traffic, i.e., traffic processes whose inter-arrival times (separating the time points of discrete arrivals form a real-valued Markov chain. As such this paper aims to extend the classical results of renewal traffic, where interarrival times are assumed to be independent, identically distributed. Following traditional renewal theory, three functions are addressed: the probability of the number of arrivals in a given interval, the corresponding mean number, and the probability of the times of future arrivals. The paper derives integral equations for these functions in the transform domain. These are then specialized to a subclass, TES+, of a versatile class of random sequences, called TES (Transform-Expand-Sample, consisting of marginally uniform autoregressive schemes with modulo-1 reduction, followed by various transformations. TES models are designed to simultaneously capture both first-order and second-order statistics of empirical records, and consequently can produce high-fidelity models. Two theoretical solutions for TES+ traffic functions are derived: an operator-based solution and a matric solution, both in the transform domain. A special case, permitting the conversion of the integral equations to differential equations, is illustrated and solved. Finally, the results are applied to obtain instructive closed-form representations for two measures of traffic burstiness: peakedness and index of dispersion, elucidating the relationship between them.

  18. blaCTX-M-I group extended spectrum beta lactamase-producing Salmonella typhi from hospitalized patients in Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Akinyemi KO

    2015-05-01

    Full Text Available Kabiru O Akinyemi,1 Bamidele A Iwalokun,2 Olajide O Alafe,1 Sulaiman A Mudashiru,1 Christopher Fakorede,11Department of Microbiology, Lagos State University, Ojo, Lagos, Nigeria; 2Biochemistry and Nutrition Division, Nigerian Institute of Medical Research, Yaba, Lagos, NigeriaPurpose: The global spread of blaCTX-M-I extended-spectrum beta-lactamase (ESBL-producing Salmonella spp. remains a major threat to treatment and control. Evidence of emergence and spread of this marker are lacking in Nigeria. This study investigated blaCTX-M-I ESBL production among Salmonella isolates from hospitalized patients.Methods: Patients (158 total made up of two groups were evaluated. Group A was composed of 135 patients with persistent pyrexia and group B was composed of 23 gastroenteritis patients and their stool samples. Samples were cultured, and isolates were identified and were subjected to antibiotic susceptibility testing by standard methods. Isolates were further screened for ESBL production, blaCTX-M-I genes and transferability by double disk synergy test, plasmid extraction, polymerase chain reaction, and conjugation experiment.Results: Thirty-five (25.9% Salmonella isolates were identified from group A, of which 74.3% were S. typhi, 22.9% were S. paratyphi and two (5.7% were invasive non-typhoidal S. enteritidis. Nine Plasmodium falciparum infections were recorded, four of which were identified as co-infections with typhoidal Salmonella. Only two (8.7% S. enteritidis samples were obtained from group B (P>0.05. A total of 24 isolates were ESBL-positive, eliciting resistance to five to seven antibiotics, and were multiple-drug resistant. ESBL production due to the blaCTX-M-I gene cluster was detected in eleven (45.8% Salmonella isolates. Nine (81.8% of the eleven blaCTX-M-I ESBL producers were S. typhi and two (18.2% isolates were S. enteritidis. Four of nine S. typhi blaCTX-M-I ESBL-producing strains harbored 23 kb self-transmissible plasmid that was co

  19. Replicon typing of plasmids carrying blaCTX-M-15 among Enterobacteriaceae isolated at the environment, livestock and human interface.

    Science.gov (United States)

    Zurfluh, Katrin; Glier, Melinda; Hächler, Herbert; Stephan, Roger

    2015-07-15

    One of the currently most important antibiotic resistance mechanisms in Enterobacteriaceae is based on the production of ESBL enzymes that inactivate β-lactam antibiotics including cephalosporins and monobactams by hydrolyzing their β-lactam ring. In humans, the most prevalent ESBL enzyme type is encoded by blaCTX-M-15. CTX-M-15 producing enterobacterial strains were also frequently isolated from environmental samples including surface water and freshwater fish. Plasmids, which can be grouped in different plasmid incompatibility types, play a key role in the horizontal spread of these multidrug resistance genes. The purpose of this study was to investigate the diversity of plasmids that carry blaCTX-M-15 genes among Enterobacteriaceae isolated at the environment, livestock and human interface. In total, 81 blaCTX-M-15-harboring isolates collected between 2009 and 2014 were tested for its ability to transfer blaCTX-M-15 by conjugation. These plasmids were further typed. Transfer of a single blaCTX-M-15-harboring plasmid was observed in 32 (39.5%) of the isolates. The most frequent replicon types detected among these plasmids are IncF-type plasmids (n=12) (mostly multi replicon plasmids with a combination of following replicons: IncFII, IncFIA and IncFIB), followed by IncI1 (n=8), IncK (n=3) and IncR (n=1). A noticeable number of plasmids (n=8) could not be assigned to any of the tested replicon types. Knowledge about the plasmid types circulating in bacterial populations is indispensable for understanding epidemiological dynamics and for establishing intervention strategies to stop further dissemination of particular plasmids.

  20. On Integrating Mobile Applications into the Digital Forensic Investigative Process

    Directory of Open Access Journals (Sweden)

    April Tanner

    2013-09-01

    Full Text Available What if a tool existed that allowed digital forensic investigators to create their own apps that would assist them with the evidence identification and collection process at crime scenes? First responders are responsible for ensuring that digital evidence is examined in such a way that the integrity of the evidence is not jeopardized. Furthermore, they play a pivotal part in preserving evidence during the collection of evidence at the crime scene and transport to the laboratory. This paper proposes the development of a mobile application that can be developed for or created by a first responder to assist in the identification, acquisition, and preservation of digital evidence at a crime scene.

  1. Selective CO methanation catalysts for fuel processing applications

    Energy Technology Data Exchange (ETDEWEB)

    Dagle, Robert A.; Wang, Yong; Xia, Guan-Guang; Strohm, James J.; Holladay, Jamelyn [Pacific Northwest National Laboratory, 902 Battle Boulevard, P.O. Box 999, Richland, WA 99352 (United States); Palo, Daniel R. [Pacific Northwest National Laboratory, 902 Battle Boulevard, P.O. Box 999, Richland, WA 99352 (United States); Microproducts Breakthrough Institute, P.O. Box 2330, Corvallis, OR 97339 (United States)

    2007-07-15

    Selective CO methanation as a strategy for CO removal in fuel processing applications was investigated over Ru-based catalysts. Ru metal loading and crystallite size were shown to affect catalyst activity and selectivity. Even operating at a gas-hourly-space-velocity as high as 13,500 h{sup -1}, a 3% Ru/Al{sub 2}O{sub 3} catalyst with a 34.2 nm crystallite was shown to be capable of reducing CO in a reformate to less than 100 ppm over a wide temperature range from 240 to 280 C, while keeping hydrogen consumption below 10%. We present the effects of metal loading, preparation method, and crystallite size on performance for Ru-based catalysts in the selective methanation of CO in the presence of H{sub 2} and CO{sub 2}. (author)

  2. Review of feasible solar energy applications to water processes

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, J.; Malato, S.; Fernandez-Ibanez, P.; Alarcon, D.; Gernjak, W.; Maldonado, M.I. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas-Plataforma Solar de Almeria (CIEMAT-PSA), Tabernas (Almeria) (Spain)

    2009-08-15

    In the context of an upcoming energy crisis due to the decline of the Oil Era, water problems are expected to substantially worsen. And vice versa, due to the close relationship between water and energy issues, water problems are also expected to contribute to increased energy problems. Furthermore, environmental considerations, such as global warming, will surely add significant pressure. In this scenario, renewable energies are rapidly increasing their contribution to the global mix, with solar energy clearly having the greatest potential, and in view of the worldwide coincidence that where there is water stress and/or scarcity, there are also good solar radiation levels, the conclusion seems clear suitable technologies must be developed to permit the use of solar energy to simultaneously help solve energy and water problems. The main solar energy applications for water processes presented in this paper are: (1) solar desalination; (2) solar detoxification and; (3) solar disinfection. (author)

  3. Application of simplified model to sensitivity analysis of solidification process

    Directory of Open Access Journals (Sweden)

    R. Szopa

    2007-12-01

    Full Text Available The sensitivity models of thermal processes proceeding in the system casting-mould-environment give the essential information concerning the influence of physical and technological parameters on a course of solidification. Knowledge of time-dependent sensitivity field is also very useful in a case of inverse problems numerical solution. The sensitivity models can be constructed using the direct approach, this means by differentiation of basic energy equations and boundary-initial conditions with respect to parameter considered. Unfortunately, the analytical form of equations and conditions obtained can be very complex both from the mathematical and numerical points of view. Then the other approach consisting in the application of differential quotient can be applied. In the paper the exact and approximate approaches to the modelling of sensitivity fields are discussed, the examples of computations are also shown.

  4. Application of statistical process control to qualitative molecular diagnostic assays

    LENUS (Irish Health Repository)

    O'Brien, Cathal P.

    2014-11-01

    Modern pathology laboratories and in particular high throughput laboratories such as clinical chemistry have developed a reliable system for statistical process control (SPC). Such a system is absent from the majority of molecular laboratories and where present is confined to quantitative assays. As the inability to apply SPC to an assay is an obvious disadvantage this study aimed to solve this problem by using a frequency estimate coupled with a confidence interval calculation to detect deviations from an expected mutation frequency. The results of this study demonstrate the strengths and weaknesses of this approach and highlight minimum sample number requirements. Notably, assays with low mutation frequencies and detection of small deviations from an expected value require greater sample numbers to mitigate a protracted time to detection. Modeled laboratory data was also used to highlight how this approach might be applied in a routine molecular laboratory. This article is the first to describe the application of SPC to qualitative laboratory data.

  5. Tableting process optimisation with the application of fuzzy models.

    Science.gov (United States)

    Belic, Ales; Skrjanc, Igor; Bozic, Damjana Zupancic; Vrecer, Franc

    2010-04-15

    A quality-by-design (QbD) principle, including process analytical technology, is becoming the principal idea in drug development and manufacturing. The implementation of QbD into product development and manufacturing requires larger resources, both human and financial, however, large-scale production can be established in a more cost-effective manner and with improved product quality. The objective of the present work was to study the influence of particle size distribution in powder mixture for tableting, and the settings of the compression parameters on the tablet quality described by the capping coefficient, standard deviations of mass and crushing strength of compressed tablets. Fuzzy models were used for modelling of the effects of the particle size distribution and the tableting machine settings on the tablet quality. The results showed that the application of mathematical models, based on the contemporary routinely measured quantities, can significantly improve the trial-and-error procedures.

  6. System Choice for Data Processing, Analysis and Applications in Defence

    Directory of Open Access Journals (Sweden)

    Y. S. Rajan

    1995-10-01

    Full Text Available The design of a suitable system for image data processing, analysis and applications in Defence is governed by users' requirements during peace time and prehostility/hostility period. The users need timely information and image products for decision-making. The product specifications in terms of their scale, geometrical accuracy, information content, and turnaround time among other things are crucial for the design of systems. The systems are not complete without efficient software for information extraction and analysis and for aiding decision-making process. Usually, the base data is from high resolution remote sensing systems, both airborne and spaceborne, and also from conventional sources, like topomap and other intelligence gathering mechanisms. The database thus evolved is basic and vital for a decision support system. The sensors providing input to the database creation could be airborne high resolution camera systems, high resolution synthetic aperture radar systems and thermal imaging systems operating from a stand-off range of 50 to 100 km, or from high resolution spaceborne panchromatic optical and synthetic aperture radar imagery. High resolution stereo data from airborne and spaceborne sensors are also increasingly needed for image interpretation and analysis. The digital elevation data is another important information, derived from either existing topographic maps or high resolution space stereo imagery. The system also should cater to a large information archival/retrieval system and data dissimination system for the users spread far and wide. This may call for to and fro traffic between central operational system and units spread over different locations, preferably, through high speed satellite communication channels. Finally, the total system should have reliability, data security, adequate redundancy, user-friendliness and be efficient enough to provide timely information transfer for the decision makers. This paper discusses

  7. Laser processing of ormosils for tissue engineering applications

    Science.gov (United States)

    Matei, A.; Zamfirescu, M.; Radu, C.; Dinescu, M.; Buruiana, E. C.; Buruiana, T.; Sima, L. E.; Petrescu, S. M.

    2011-09-01

    Hybrid methacrylates based on silane derivates (ormosils) have been considered for applications in electronics, microtechnology, corrosion resistant coatings, dentistry, and biomedical implants. The presence of both inorganic chains, responsible for chemical and thermal stability, hardness, and transparency, and organic groups, which bring new advantages such as the possibility of functionalization and easy, low temperature processing, can result in the appearance of unique properties. 2D structures of hybrid polymers were produced by Two Photon Polymerization (2PP). A Ti: Sapphire laser having 200 fs pulse duration and 2 kHz repetition rate, working at a wavelength of 775 nm, was used for the 2PP experiments. The biocompatibility of the obtained structures (scaffolds) was tested in different cell cultures, which is a first step toward exploring their potential for applications in tissue engineering. Cells morphology, adhesion, and alignment were studied on polymeric structures with different shapes, obtained in various experimental conditions. Their interaction with normal human epidermal melanocytes (NHEM) and dysplastic oral keratinocytes (DOK) was investigated, with the aim of obtaining an epidermal graft.

  8. Image processing and applications based on visualizing navigation service

    Science.gov (United States)

    Hwang, Chyi-Wen

    2015-07-01

    When facing the "overabundant" of semantic web information, in this paper, the researcher proposes the hierarchical classification and visualizing RIA (Rich Internet Application) navigation system: Concept Map (CM) + Semantic Structure (SS) + the Knowledge on Demand (KOD) service. The aim of the Multimedia processing and empirical applications testing, was to investigating the utility and usability of this visualizing navigation strategy in web communication design, into whether it enables the user to retrieve and construct their personal knowledge or not. Furthermore, based on the segment markets theory in the Marketing model, to propose a User Interface (UI) classification strategy and formulate a set of hypermedia design principles for further UI strategy and e-learning resources in semantic web communication. These research findings: (1) Irrespective of whether the simple declarative knowledge or the complex declarative knowledge model is used, the "CM + SS + KOD navigation system" has a better cognition effect than the "Non CM + SS + KOD navigation system". However, for the" No web design experience user", the navigation system does not have an obvious cognition effect. (2) The essential of classification in semantic web communication design: Different groups of user have a diversity of preference needs and different cognitive styles in the CM + SS + KOD navigation system.

  9. BENEFICIAL FACE OF BACTERIOPHAGES: APPLICATIONS IN FOOD PROCESSING

    Directory of Open Access Journals (Sweden)

    H. V. Raghu

    2012-06-01

    Full Text Available Foods are processed to make them available at all places; consequently, our awareness regarding hygiene measures in food production has also increased dramatically over the last decades. In many countries cases associated with foodborne infectious are increased. However, available techniques are unable to effectively control the problem. Further, exploring novel methods and technologies for ensuring the safety of food with effective quality control approaches are under research. Phages are the natural enemies of bacteria, and are more specific to host renders them ideal candidates for applications designed to increase food safety during the production process. Scientific findings are available showing the possibility to use as biocontrol agents against various pathogens with out interfering with the natural microflora or the cultures in fermented products. Furthermore, phages or phage derived proteins can also be used to detect the presence of unwanted pathogens in food or the production environments, which allows quick and sp ecific identification of viable cells. Bacteriophages are natural, found in various environments including water; foods etc. and are not found significantly influence the human cells.

  10. Process, structure, property and applications of metallic glasses

    Directory of Open Access Journals (Sweden)

    B. Geetha Priyadarshini

    2016-07-01

    Full Text Available Metallic glasses (MGs are gaining immense technological significance due to their unique structure-property relationship with renewed interest in diverse field of applications including biomedical implants, commercial products, machinery parts, and micro-electro-mechanical systems (MEMS. Various processing routes have been adopted to fabricate MGs with short-range ordering which is believed to be the genesis of unique structure. Understanding the structure of these unique materials is a long-standing unsolved mystery. Unlike crystalline counterpart, the outstanding properties of metallic glasses owing to the absence of grain boundaries is reported to exhibit high hardness, excellent strength, high elastic strain, and anti-corrosion properties. The combination of these remarkable properties would significantly contribute to improvement of performance and reliability of these materials when incorporated as bio-implants. The nucleation and growth of metallic glasses is driven by thermodynamics and kinetics in non-equilibrium conditions. This comprehensive review article discusses the various attributes of metallic glasses with an aim to understand the fundamentals of relationship process-structure-property existing in such unique class of material.

  11. Enzymes from Seafood Processing Waste and Their Applications in Seafood Processing.

    Science.gov (United States)

    Venugopal, V

    Commercial fishery processing results in discards up to 50% of the raw material, consisting of scales, shells, frames, backbones, viscera, head, liver, skin, belly flaps, dark muscle, roe, etc. Besides, fishing operations targeted at popular fish and shellfish species also result in landing of sizeable quantity of by-catch, which are not of commercial value because of their poor consumer appeal. Sensitivity to rapid putrefaction of fishery waste has serious adverse impact on the environment, which needs remedial measures. Secondary processing of the wastes has potential to generate a number of valuable by-products such as proteins, enzymes, carotenoids, fat, and minerals, besides addressing environmental hazards. Fishery wastes constitute good sources of enzymes such as proteases, lipases, chitinase, alkaline phosphatase, transglutaminase, hyaluronidase, acetyl glycosaminidase, among others. These enzymes can have diverse applications in the seafood industry, which encompass isolation and modification of proteins and marine oils, production of bioactive peptides, acceleration of traditional fermentation, peeling and deveining of shellfish, scaling of finfish, removal of membranes from fish roe, extraction of flavors, shelf life extension, texture modification, removal of off-odors, and for quality control either directly or as components of biosensors. Enzymes from fish and shellfish from cold habitats are particularly useful since they can function comparatively at lower temperatures thereby saving energy and protecting the food products. Potentials of these applications are briefly discussed.

  12. First Description of the Extended Spectrum-Beta-Lactamase Gene blaCTX-M-109 in Salmonella Grumpensis Strains Isolated from Neonatal Nosocomial Infections in Dakar, Senegal.

    Directory of Open Access Journals (Sweden)

    Amadou Diop

    Full Text Available Nosocomial infections are very common in African hospitals, particularly in neonatal units. These infections are most often caused by bacteria such as Escherichia coli, Klebsiella spp and Staphylococcus spp. Salmonella strains are rarely involved in nosocomial infections. Here, we report the first description of S. Grumpensis in neonatal infections in Senegal. Seventeen Salmonella strains were isolated from hospitalized infants' stool samples. The following resistance phenotype was described in strains: AMXRTICRCFR FOXRCFXRCTXRCAZRIMPSATMRNARNORRCIPRTMRGMRTERSXTR. All isolates were susceptible to imipenem, 15 out of 17 produced an extended spectrum ß-lactamase (ESBL. blaOXA-1, blaSHV-1, blaTEM-1, blaCTX-M1 genes were detected in strains 8, 13, 5 and 8, respectively. blaCTX-M1 sequencing revealed the presence of blaCTX-M-109. Thirteen of the 17 Salmonella Grumpensis strains were analyzed by PFGE. These 13 isolates belonged to a single pulsotype and were genotypically identical. This is the first report of neonatal S. Grumpensis infections in Senegal, and the first report of blaCTX-M-109 in the genus Salmonella.

  13. Chromosomal blaCTX-M-₁₅ associated with ISEcp1 in Proteus mirabilis and Morganella morganii isolated at the Military Hospital of Tunis, Tunisia.

    Science.gov (United States)

    Mahrouki, Sihem; Belhadj, Omrane; Chihi, Hela; Mohamed, Ben Moussa; Celenza, Giuseppe; Amicosante, Gianfranco; Perilli, Mariagrazia

    2012-09-01

    This study investigated the genetic environment of bla(CTX-M) genes and associated resistance genes in seven Proteus mirabilis and six Morganella morganii extended spectrum β-lactamase (ESBL)-positive isolates. The isolates were recovered from hospitalized patients with respiratory or urinary tract infections at the Military Hospital of Tunis, Tunisia. Twenty-one of the 200 strains exhibited non-susceptibility to third generation cephalosporins and, among these strains, the double-disk synergy test confirmed the ESBL phenotype in 13 isolates. These ESBL producers were co-resistant to chloramphenicol, tetracycline and oflaxacin but remained susceptible to ertapenem (MIC<0.25 mg l(-1)). The presence and nature of bla(CTX-M-15), bla(CTX-M-8), bla(TEM-24), bla(TEM-1) and bla(TEM-2) genes was determined by PCR and sequencing. Chromosomal localization of the bla(CTX-M-15) gene was confirmed in all strains, with the exception of M. morganii isolate M-17991, by Southern-blot analysis performed either on chromosomal or plasmid DNA. M. morganii M-12012 and M. morganii M-6019 showed the same PFGE pattern, whereas the remaining CTX-M-15-producing isolates were unrelated. The presence of ISEcp1 was ascertained in CTX-M-15-producing isolates. A class 1 integron with different gene cassettes (dfrA1, orfC and aadB) was found in five P. mirabilis and six M. morganii isolates.

  14. Managing probe applications effectively? The process of pre-commercial fuel cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Hellman, H.L. [Delft Univ. of Technology, Delft (Netherlands)

    2007-07-01

    There has been a high degree of uncertainty regarding market adoption of proton exchange membrane (PEM) fuel cell technologies, making it challenging for fuel cell firms to determine which markets to pursue at which point in time. Probes, such as prototypes, demonstrations and field trials, are market experiments conducted by fuel cell firms and industry that are central to the commercialization of fuel cell technology. However, demonstration projects are extremely resource and time intensive, and outcomes are uncertain. This paper reviewed innovation management literature on the characteristics of the technology application process. Case study research of four fuel cell firms were discussed in terms of probe objectives and outcomes. An analysis of probe application patterns over time was also presented. Several fuel cell projects were also analyzed in terms of motivations and lessons learned. The paper focused on young independent fuel cell developers that had limited resources to allocate and waste resources on ineffective probe applications. The findings complement prior research that have found probe applications a valuable tool for learning, stimulating market demand and network formation. The paper made several recommendations regarding the main objectives of the fuel cell project, to set realistic goals and align expectations between consortia members. In addition, it was found that a short term demonstration project may appear to be an attractive application, but a project with a longer term vision and a commercial value proposition was more likely to attract stakeholders. 16 refs., 3 figs.

  15. Application of Gaussian Process Modeling to Analysis of Functional Unreliability

    Energy Technology Data Exchange (ETDEWEB)

    R. Youngblood

    2014-06-01

    This paper applies Gaussian Process (GP) modeling to analysis of the functional unreliability of a “passive system.” GPs have been used widely in many ways [1]. The present application uses a GP for emulation of a system simulation code. Such an emulator can be applied in several distinct ways, discussed below. All applications illustrated in this paper have precedents in the literature; the present paper is an application of GP technology to a problem that was originally analyzed [2] using neural networks (NN), and later [3, 4] by a method called “Alternating Conditional Expectations” (ACE). This exercise enables a multifaceted comparison of both the processes and the results. Given knowledge of the range of possible values of key system variables, one could, in principle, quantify functional unreliability by sampling from their joint probability distribution, and performing a system simulation for each sample to determine whether the function succeeded for that particular setting of the variables. Using previously available system simulation codes, such an approach is generally impractical for a plant-scale problem. It has long been recognized, however, that a well-trained code emulator or surrogate could be used in a sampling process to quantify certain performance metrics, even for plant-scale problems. “Response surfaces” were used for this many years ago. But response surfaces are at their best for smoothly varying functions; in regions of parameter space where key system performance metrics may behave in complex ways, or even exhibit discontinuities, response surfaces are not the best available tool. This consideration was one of several that drove the work in [2]. In the present paper, (1) the original quantification of functional unreliability using NN [2], and later ACE [3], is reprised using GP; (2) additional information provided by the GP about uncertainty in the limit surface, generally unavailable in other representations, is discussed

  16. Application of particle method to the casting process simulation

    Science.gov (United States)

    Hirata, N.; Zulaida, Y. M.; Anzai, K.

    2012-07-01

    Casting processes involve many significant phenomena such as fluid flow, solidification, and deformation, and it is known that casting defects are strongly influenced by the phenomena. However the phenomena complexly interacts each other and it is difficult to observe them directly because the temperature of the melt and other apparatus components are quite high, and they are generally opaque; therefore, a computer simulation is expected to serve a lot of benefits to consider what happens in the processes. Recently, a particle method, which is one of fully Lagrangian methods, has attracted considerable attention. The particle methods based on Lagrangian methods involving no calculation lattice have been developed rapidly because of their applicability to multi-physics problems. In this study, we combined the fluid flow, heat transfer and solidification simulation programs, and tried to simulate various casting processes such as continuous casting, centrifugal casting and ingot making. As a result of continuous casting simulation, the powder flow could be calculated as well as the melt flow, and the subsequent shape of interface between the melt and the powder was calculated. In the centrifugal casting simulation, the mold was smoothly modeled along the shape of the real mold, and the fluid flow and the rotating mold are simulated directly. As a result, the flow of the melt dragged by the rotating mold was calculated well. The eccentric rotation and the influence of Coriolis force were also reproduced directly and naturally. For ingot making simulation, a shrinkage formation behavior was calculated and the shape of the shrinkage agreed well with the experimental result.

  17. Nanoemulsion: process selection and application in cosmetics--a review.

    Science.gov (United States)

    Yukuyama, M N; Ghisleni, D D M; Pinto, T J A; Bou-Chacra, N A

    2016-02-01

    In recent decades, considerable and continuous growth in consumer demand in the cosmetics field has spurred the development of sophisticated formulations, aiming at high performance, attractive appearance, sensorial benefit and safety. Yet despite increasing demand from consumers, the formulator faces certain restrictions regarding the optimum equilibrium between the active compound concentration and the formulation base taking into account the nature of the skin structure, mainly concerning to the ideal penetration of the active compound, due to the natural skin barrier. Emulsion is a mixture of two immiscible phases, and the interest in nanoscale emulsion has been growing considerably in recent decades due to its specific attributes such as high stability, attractive appearance and drug delivery properties; therefore, performance is expected to improve using a lipid-based nanocarrier. Nanoemulsions are generated by different approaches: the so-called high-energy and low-energy methods. The global overview of these mechanisms and different alternatives for each method are presented in this paper, along with their benefits and drawbacks. As a cosmetics formulation is reflected in product delivery to consumers, nanoemulsion development with prospects for large-scale production is one of the key attributes in the method selection process. Thus, the aim of this review was to highlight the main high- and low-energy methods applicable in cosmetics and dermatological product development, their specificities, recent research on these methods in the cosmetics and consideration for the process selection optimization. The specific process with regard to inorganic nanoparticles, polymer nanoparticles and nanocapsule formulation is not considered in this paper.

  18. Class 1 integrons in non-clonal multidrug-resistant Acinetobacter baumannii from Iran, description of the new blaIMP-55 allele in In1243.

    Science.gov (United States)

    Azizi, Omid; Shakibaie, Mohammad Reza; Badmasti, Farzad; Modarresi, Farzan; Ramazanzadeh, Rashid; Mansouri, Shahla; Shahcheraghi, Fereshteh

    2016-09-01

    Infections and outbreaks caused by multidrug-resistant Acinetobacter baumannii (MDR-AB) are prevalent and have been reported worldwide over the past 20 or more years. Class 1 integron in MDR-AB plays an important role in the spread of antibiotic resistance in clinical settings. This study has been conducted to evaluate the detection of metallo-β-lactamase, characterization of class 1 integron and determination of clonal relatedness among A. baumannii hospital isolates. Sixty-five clinical isolates of MDR-AB were recovered from two Iranian hospital's intensive care units from February to August 2013. Integrase (intI1) and blaIMP genes were detected in 70.8 % (n=46/65) and 9.23 % (n=6/65) of the isolates using PCR assay, respectively. No other metallo-β-lactamase genes (blaVIM, blaSIM and blaNDM) were detected. PCR sequencing of integron gene cassette revealed the following arrays: blaOXA10-aacA4-blaIMP-55-cmlA5 (as a novel array was designated In1243), aacC1 and aadA1. Analysis of blaIMP gene revealed a new allele designated as blaIMP-55. Gene transfer experiment by conjugation showed the 36 kb conjugative plasmid harbouring In1243. The clonal assessment by repetitive extragenic palindromic PCR demonstrated a high-degree relatedness among the strains, but strains harbouring In1243 displayed a different repetitive extragenic palindromic PCR profile. In this study, we found that a novel class 1 integron (In1243) that encoded a new blaIMP allele resided on a transferable plasmid in non-clonal strains of MDR-AB.

  19. Dissemination of blaOXA-23 in Acinetobacter spp. in China: main roles of conjugative plasmid pAZJ221 and transposon Tn2009.

    Science.gov (United States)

    Liu, Li-Lin; Ji, Shu-Juan; Ruan, Zhi; Fu, Ying; Fu, Yi-Qi; Wang, Yan-Fei; Yu, Yun-Song

    2015-04-01

    Production of the OXA-23 carbapenemase is the most common reason for the increasing carbapenem resistance in Acinetobacter spp. This study was conducted to reveal the genetic basis of blaOXA-23 dissemination in Acinetobacter spp. in China. A total of 63 carbapenem-resistant OXA-23-producing Acinetobacter sp. isolates, representing different backgrounds, were selected from 28 hospitals in 18 provinces for this study. Generally, two patterns of plasmids carrying blaOXA-23 were detected according to S1-nuclease pulsed-field gel electrophoresis and Southern blot hybridization. A ca. 78-kb plasmid, designated pAZJ221, was found in 23 Acinetobacter baumannii and three Acinetobacter nosocomialis isolates, while a novel ca. 50-kb plasmid was carried by only two other A. baumannii isolates. Three of these isolates had an additional copy of blaOXA-23 on the chromosome. Transformation of the two plasmids succeeded, but only pAZJ221 was conjugative. Plasmid pAZJ221 was sequenced completely and found to carry no previously known resistance genes except blaOXA-23. The blaOXA-23 gene of the remaining 35 isolates was chromosome borne. The blaOXA-23 genetic environments were correlated with Tn2009 in 57 isolates, Tn2008 in 5 isolates, and Tn2006 in 1 isolate. The MIC values for the carbapenems with these isolates were not significantly associated with the genomic locations or the copy numbers of blaOXA-23. Overall, these observations suggest that the plasmid pAZJ221 and Tn2009 have effectively contributed to the wide dissemination of blaOXA-23 in Acinetobacter spp. in China and that horizontal gene transfer may play an important role in dissemination of the blaOXA-23 gene.

  20. [Genetic Investigation of bla(CTX-M)-typing in Extended-spectrum β-lactamase-producing Escherichia coli and Klebsiella pneumoniae from Clinical Specimens and Commercially Available Chicken Liver].

    Science.gov (United States)

    Kan, Miki; Shinomiya, Hiroto; Kitao, Takashi

    2016-05-01

    A genetic investigation consisting of the bla(CTX-M) typing was performed using 40 extended spectrum β-lactamase (ESBL)-producing Escherichia coli isolates from chicken liver and 43 ESBL-producing E. coli and 42 ESBL-producing Klebsiella pneumoniae isolates from patients. The types were determined using a sequence analysis. In 31 isolates in the bla(CTX-M-1) group, there were 13 with the bla(CTX-M-1) and all were from chicken liver. Nine E. coli isolates from chicken liver and one E. coli isolate from patients were found to be bla(CTX-M-55). In the bla(CTX-M-15), there were 6 E. coli isolates and one K. pneumoniae isolate from patients. All 39 isolates in the bla(CTX-M-2) group had the blac(CTX-M-2). Fifty-five isolates were found in the bla(CTX-M-9) group, the highest detection frequency, with 36 possessing bla(CTX-M-14) : 20 E. coli and 13 K. pneumoniae from patients and 3 E. coli from chicken liver. There were 17 bla(CTX-M-27) isolates, including 10 E. coli and 7 K. pneumoniae from patients. One bla(CTX-M-90) K. pneumoniae isolate and one bla(CTX-M-9) E. coli isolate were also obtained from patients. These results indicate that the E. coli isolates from chicken liver consist of bla(CTX-M-1), bla(CTX-M-2) and bla(CTX-M-55) ; the E. coli isolates from patients consist of bla(CTX-M-14) and bla(CTX-M-27) ; and the K. pneumoniae isolates from patients consist of bla(CTX-M-2), bla(CTX-M-14) and bla(CTX-M-27). Therefore, the bla(CTX-M) type differs in isolates from chicken liver and those from humans. These results suggest that it is unlikely that ESBL-producing E. coli from chicken liver are firmly established in the human intestinal tract.

  1. Genetic Environment of the blaKPC-2 Gene in a Klebsiella pneumoniae Isolate That May Have Been Imported to Russia from Southeast Asia.

    Science.gov (United States)

    Ageevets, Vladimir; Sopova, Julia; Lazareva, Irina; Malakhova, Maya; Ilina, Elena; Kostryukova, Elena; Babenko, Vladislav; Carattoli, Alessandra; Lobzin, Yuri; Uskov, Alexander; Sidorenko, Sergey

    2017-02-01

    The nucleotide sequence of a blaKPC-2-harboring plasmid (pKPCAPSS) from Klebsiella pneumoniae ST273 isolated in Saint Petersburg, Russia, from a patient with history of recent travel to Vietnam is presented. This 127,970-bp plasmid possessed both IncFII and IncR replicons. blaKPC-2 was localized on a hypothetical mobile element. This element was flanked by 38-bp inverted Tn3 repeats and included a Tn3-specific transposase gene, macrolide resistance operon (mphA-mrx-mphR), and a fragment of blaTEM with unique polymorphisms.

  2. Complete sequence of the IncT-type plasmid pT-OXA-181 carrying the blaOXA-181 carbapenemase gene from Citrobacter freundii.

    Science.gov (United States)

    Villa, Laura; Carattoli, Alessandra; Nordmann, Patrice; Carta, Claudio; Poirel, Laurent

    2013-04-01

    The gene encoding the carbapenemase OXA-181 (an OXA-48 variant) was identified from a Citrobacter freundii isolate coproducing NDM-1. The whole sequence of plasmid pT-OXA-181 bearing the blaOXA-181 gene was determined and revealed a 84-kb mobilizable but non-self-conjugative IncT-type plasmid. It totally differs from the 7.6-kb ColE-type and blaOXA-181-bearing plasmid recently identified in a Klebsiella pneumoniae isolate. However, in both plasmids, insertion sequence ISEcp1 might have played a role in acquisition of the blaOXA-181 gene.

  3. Double Copies of bla(KPC-3)::Tn4401a on an IncX3 Plasmid in Klebsiella pneumoniae Successful Clone ST512 from Italy.

    Science.gov (United States)

    Fortini, Daniela; Villa, Laura; Feudi, Claudia; Pires, João; Bonura, Celestino; Mammina, Caterina; Endimiani, Andrea; Carattoli, Alessandra

    2015-11-02

    A carbapenem-resistant sequence type 512 (ST512) Klebsiella pneumoniae carbapenemase 3 (KPC-3)-producing K. pneumoniae strain showing a novel variant plasmid content was isolated in Palermo, Italy, in 2014. ST512 is a worldwide successful clone associated with the spread of bla(KPC) genes located on the IncFIIk pKpQIL plasmid. In our ST512 strain, the bla(KPC-3) gene was unusually located on an IncX3 plasmid, whose complete sequence was determined. Two copies of bla(KPC-3)::Tn4401a caused by intramolecular transposition events were detected in the plasmid.

  4. Efficient Inference of Gaussian-Process-Modulated Renewal Processes with Application to Medical Event Data.

    Science.gov (United States)

    Lasko, Thomas A

    2014-07-01

    The episodic, irregular and asynchronous nature of medical data render them difficult substrates for standard machine learning algorithms. We would like to abstract away this difficulty for the class of time-stamped categorical variables (or events) by modeling them as a renewal process and inferring a probability density over non-parametric longitudinal intensity functions that modulate the process. Several methods exist for inferring such a density over intensity functions, but either their constraints prevent their use with our potentially bursty event streams, or their time complexity renders their use intractable on our long-duration observations of high-resolution events, or both. In this paper we present a new efficient and flexible inference method that uses direct numeric integration and smooth interpolation over Gaussian processes. We demonstrate that our direct method is up to twice as accurate and two orders of magnitude more efficient than the best existing method (thinning). Importantly, our direct method can infer intensity functions over the full range of bursty to memoryless to regular events, which thinning and many other methods cannot do. Finally, we apply the method to clinical event data and demonstrate a simple example application facilitated by the abstraction.

  5. 微波技术应用%Application of Microwave Processing

    Institute of Scientific and Technical Information of China (English)

    王盼盼

    2009-01-01

    As a new development technique microwave technology has applied widely in areas of food processing. This article summarized the principles and characteristics of microwave technology and applications of microwave processing technology in meat products, cereals, fruits and vegetables processing. Some problems existed in microwave applications were analyzed. The development trend of microwave processing technology in food industry was put forward.

  6. Membrane Lipid Analysis Applications to Monitoring Land Application of Food Processing Waste Water

    Science.gov (United States)

    Larson, R. A.; Fernandez-Torres, I.; Safferman, S. I.; Pfiffner, S. M.

    2008-12-01

    Land application of food processing waste is a common treatment technique relying on the soil assimilation capacity, including biological activity, for effective treatment. This treatment technique poses implications for ground water associated with metal leaching when excess loading occurs resulting in oxygen limitations. Determining prescriptive loadings that are protective of groundwater for food processors who dispose of wastewater by land application can be difficult due to site variability related to environmental conditions, application techniques, and varying wastewater characteristics. In an effort to responsibly practice wastewater land application, the use of soil sensors, soil leachate water quality parameters, and phospholipids measurements were researched to determine if assimilation could be predicted. Laboratory sand soil columns were constructed to mimic the conditions represented by food processing wastewater irrigation systems. Soil sensors for temperature, oxygen, and soil moisture were installed in the column and relayed semi-continuous data for the soil conditions within the soil columns. Results indicate the sensors predicted over loading that would result in metal leaching. Soil samples analyzed for phospholipid fatty acids further supported this data by categorizing the soil microbial community which indicates the treatment processes occurring within three depths (3, 12, and 20 inches) of the soil columns sampled before and after impact from excessive loading. Membrane lipid analyses uses GC/MS and HPLC/ES/MS/MS to provide estimates of biomass, phospholipid community profiles and respiratory quinone profiles. Biomasss estimates showed declining biomass with depth in the column. At the 3" depth the biomass averaged ~68,000 pmole/gdw, while biomass averaged ~500 and ~30 pmol/gdw for 12" and 20" depths, respectively. Specific phospholipids indicated the presence of fungi (18:2's) in the 3" depth and the presence of sulfate- reducing bacteria

  7. IncA/C Plasmid Carrying bla(NDM-1), bla(CMY-16), and fosA3 in a Salmonella enterica Serovar Corvallis Strain Isolated from a Migratory Wild Bird in Germany.

    Science.gov (United States)

    Villa, L; Guerra, B; Schmoger, S; Fischer, J; Helmuth, R; Zong, Z; García-Fernández, A; Carattoli, A

    2015-10-01

    A Salmonella enterica serovar Corvallis strain was isolated from a wild bird in Germany. This strain carried the IncA/C2 pRH-1238 plasmid. Complete sequencing of the plasmid was performed, identifying the blaNDM-1, blaCMY-16, fosA3, sul1, sul2, strA, strB, aac(6')-Ib, aadA5, aphA6, tetA(A), mphA, floR, dfrA7, and merA genes, which confer clinically relevant resistance to most of the antimicrobial classes, including β-lactams with carbapenems, fosfomycin, aminoglycosides, co-trimoxazole, tetracyclines, and macrolides. The strain likely originated from the Asiatic region and was transferred to Germany through the Milvus migrans migratory route.

  8. 40 CFR 459.10 - Applicability; description of the photographic processing subcategory.

    Science.gov (United States)

    2010-07-01

    ... photographic processing subcategory. 459.10 Section 459.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOTOGRAPHIC POINT SOURCE CATEGORY Photographic Processing Subcategory § 459.10 Applicability; description of the photographic processing subcategory....

  9. Rapid Prototyping of High Performance Signal Processing Applications

    Science.gov (United States)

    Sane, Nimish

    Advances in embedded systems for digital signal processing (DSP) are enabling many scientific projects and commercial applications. At the same time, these applications are key to driving advances in many important kinds of computing platforms. In this region of high performance DSP, rapid prototyping is critical for faster time-to-market (e.g., in the wireless communications industry) or time-to-science (e.g., in radio astronomy). DSP system architectures have evolved from being based on application specific integrated circuits (ASICs) to incorporate reconfigurable off-the-shelf field programmable gate arrays (FPGAs), the latest multiprocessors such as graphics processing units (GPUs), or heterogeneous combinations of such devices. We, thus, have a vast design space to explore based on performance trade-offs, and expanded by the multitude of possibilities for target platforms. In order to allow systematic design space exploration, and develop scalable and portable prototypes, model based design tools are increasingly used in design and implementation of embedded systems. These tools allow scalable high-level representations, model based semantics for analysis and optimization, and portable implementations that can be verified at higher levels of abstractions and targeted toward multiple platforms for implementation. The designer can experiment using such tools at an early stage in the design cycle, and employ the latest hardware at later stages. In this thesis, we have focused on dataflow-based approaches for rapid DSP system prototyping. This thesis contributes to various aspects of dataflow-based design flows and tools as follows: 1. We have introduced the concept of topological patterns, which exploits commonly found repetitive patterns in DSP algorithms to allow scalable, concise, and parameterizable representations of large scale dataflow graphs in high-level languages. We have shown how an underlying design tool can systematically exploit a high

  10. Si-rich Silicon Nitride for Nonlinear Signal Processing Applications.

    Science.gov (United States)

    Lacava, Cosimo; Stankovic, Stevan; Khokhar, Ali Z; Bucio, T Dominguez; Gardes, F Y; Reed, Graham T; Richardson, David J; Petropoulos, Periklis

    2017-12-01

    Nonlinear silicon photonic devices have attracted considerable attention thanks to their ability to show large third-order nonlinear effects at moderate power levels allowing for all-optical signal processing functionalities in miniaturized components. Although significant efforts have been made and many nonlinear optical functions have already been demonstrated in this platform, the performance of nonlinear silicon photonic devices remains fundamentally limited at the telecom wavelength region due to the two photon absorption (TPA) and related effects. In this work, we propose an alternative CMOS-compatible platform, based on silicon-rich silicon nitride that can overcome this limitation. By carefully selecting the material deposition parameters, we show that both of the device linear and nonlinear properties can be tuned in order to exhibit the desired behaviour at the selected wavelength region. A rigorous and systematic fabrication and characterization campaign of different material compositions is presented, enabling us to demonstrate TPA-free CMOS-compatible waveguides with low linear loss (~1.5 dB/cm) and enhanced Kerr nonlinear response (Re{γ} = 16 Wm(-1)). Thanks to these properties, our nonlinear waveguides are able to produce a π nonlinear phase shift, paving the way for the development of practical devices for future optical communication applications.

  11. 5th Seminar on Stochastic Processes, Random Fields and Applications

    CERN Document Server

    Russo, Francesco; Dozzi, Marco

    2008-01-01

    This volume contains twenty-eight refereed research or review papers presented at the 5th Seminar on Stochastic Processes, Random Fields and Applications, which took place at the Centro Stefano Franscini (Monte Verità) in Ascona, Switzerland, from May 30 to June 3, 2005. The seminar focused mainly on stochastic partial differential equations, random dynamical systems, infinite-dimensional analysis, approximation problems, and financial engineering. The book will be a valuable resource for researchers in stochastic analysis and professionals interested in stochastic methods in finance. Contributors: Y. Asai, J.-P. Aubin, C. Becker, M. Benaïm, H. Bessaih, S. Biagini, S. Bonaccorsi, N. Bouleau, N. Champagnat, G. Da Prato, R. Ferrière, F. Flandoli, P. Guasoni, V.B. Hallulli, D. Khoshnevisan, T. Komorowski, R. Léandre, P. Lescot, H. Lisei, J.A. López-Mimbela, V. Mandrekar, S. Méléard, A. Millet, H. Nagai, A.D. Neate, V. Orlovius, M. Pratelli, N. Privault, O. Raimond, M. Röckner, B. Rüdiger, W.J. Runggaldi...

  12. Applications of Time-Reversal Processing for Planetary Surface Communications

    Science.gov (United States)

    Barton, Richard J.

    2007-01-01

    Due to the power constraints imposed on wireless sensor and communication networks deployed on a planetary surface during exploration, energy efficient transfer of data becomes a critical issue. In situations where groups of nodes within a network are located in relatively close proximity, cooperative communication techniques can be utilized to improve the range, data rate, power efficiency, and lifetime of the network. In particular, if the point-to-point communication channels on the network are well modeled as frequency non-selective, distributed or cooperative beamforming can employed. For frequency-selective channels, beamforming itself is not generally appropriate, but a natural generalization of it, time-reversal communication (TRC), can still be effective. Time-reversal processing has been proposed and studied previously for other applications, including acoustical imaging, electromagnetic imaging, underwater acoustic communication, and wireless communication channels. In this paper, we study both the theoretical advantages and the experimental performance of cooperative TRC for wireless communication on planetary surfaces. We give a brief introduction to TRC and present several scenarios where TRC could be profitably employed during planetary exploration. We also present simulation results illustrating the performance of cooperative TRC employed in a complex multipath environment and discuss the optimality of cooperative TRC for data aggregation in wireless sensor networks

  13. Parallel computer processing and modeling: applications for the ICU

    Science.gov (United States)

    Baxter, Grant; Pranger, L. Alex; Draghic, Nicole; Sims, Nathaniel M.; Wiesmann, William P.

    2003-07-01

    Current patient monitoring procedures in hospital intensive care units (ICUs) generate vast quantities of medical data, much of which is considered extemporaneous and not evaluated. Although sophisticated monitors to analyze individual types of patient data are routinely used in the hospital setting, this equipment lacks high order signal analysis tools for detecting long-term trends and correlations between different signals within a patient data set. Without the ability to continuously analyze disjoint sets of patient data, it is difficult to detect slow-forming complications. As a result, the early onset of conditions such as pneumonia or sepsis may not be apparent until the advanced stages. We report here on the development of a distributed software architecture test bed and software medical models to analyze both asynchronous and continuous patient data in real time. Hardware and software has been developed to support a multi-node distributed computer cluster capable of amassing data from multiple patient monitors and projecting near and long-term outcomes based upon the application of physiologic models to the incoming patient data stream. One computer acts as a central coordinating node; additional computers accommodate processing needs. A simple, non-clinical model for sepsis detection was implemented on the system for demonstration purposes. This work shows exceptional promise as a highly effective means to rapidly predict and thereby mitigate the effect of nosocomial infections.

  14. Application of Dynamic Speckle Techniques in Monitoring Biofilms Drying Process

    Science.gov (United States)

    Enes, Adilson M.; Júnior, Roberto A. Braga; Dal Fabbro, Inácio M.; da Silva, Washington A.; Pereira, Joelma

    2008-04-01

    Horticultural crops exhibit losses far greater than grains in Brazil which are associated to inappropriate maturation, mechanical bruising, infestation by microorganisms, wilting, etc. Appropriate packing prevents excessive mass loss associated to transpiration as well as to respiration, by controlling gas exchanging with outside environment. Common packing materials are identified as plastic films, waxes and biofilms. Although research developed with edible films and biopolymers has increased during last years to attend the food industry demands, avoiding environmental problems, little efforts have been reported on biofilm physical properties investigations. These properties, as drying time and biofilm interactions with environment are considered of basic importance. This research work aimed to contribute to development of a methodology to evaluate yucca (Maniot vulgaris) based biofilms drying time supported by a biospeckle technique. Biospeckle is a phenomenon generated by a laser beam scattered on a dynamic active surface, producing a time varying pattern which is proportional to the surface activity level. By capturing and processing the biospeckle image it is possible to attribute a numerical quantity to the surface bioactivity. Materials exhibiting high moisture content will also show high activity, which will support the drying time determination. Tests were set by placing biofilm samples on polyetilen plates and further submitted to laser exposition at four hours interval to capture the pattern images, generating the Intensities Dispersion Modulus. Results indicates that proposed methodology is applicable in determining biofilm drying time as well as vapor losses to environment.

  15. Application of a novel decontamination process using gaseous ozone

    Energy Technology Data Exchange (ETDEWEB)

    Moat, J.; Shone, J.; Upton, M. [Manchester Univ., School of Medecine, Manchester (United Kingdom). Medical Microbiology, Translation Medicine; Cargill, J. [Old Medical School, Leeds (United Kingdom). Dept. of Microbiology

    2009-08-15

    Hospital surfaces that are touched regularly by staff carry bacterial spores and pathogens. Environmental disinfection of health care facilities is an important aspect of infection control. This paper presented a recent innovation aimed at improving hospital hygiene and decontamination of laboratory equipment. The vapour- and gas-based treatment was developed to penetrate rooms or soft furnishings and reach places inaccessible by conventional approaches. Surfaces seeded with a range of vegetative cells and spores of bacteria of clinical relevance were decontaminated using the ozone-based treatment. The efficiency of the approach for room sanitization was also evaluated. A quenching agent was used to rapidly reduce ozone concentrations to safe levels allowing treatment times of less than 1 h for most of the organisms tested. Bacteria was seeded onto agar plates and solid surfaces. Reductions in bacterial load of greater than 3 log values were then recorded for a number of organisms including Escherichia coli and methicillin-resistant Staphylococcus aureus. Application of the process in a 30 m{sup 3} room showed similar reductions in viable counts for these organisms and for Clostridium difficile spores. It was concluded that ozone-based decontamination of healthcare environments could prove to be a highly cost-effective intervention. 35 refs., 1 tab., 3 figs.

  16. Onboard Radar Processing Development for Rapid Response Applications

    Science.gov (United States)

    Lou, Yunling; Chien, Steve; Clark, Duane; Doubleday, Josh; Muellerschoen, Ron; Wang, Charles C.

    2011-01-01

    We are developing onboard processor (OBP) technology to streamline data acquisition on-demand and explore the potential of the L-band SAR instrument onboard the proposed DESDynI mission and UAVSAR for rapid response applications. The technology would enable the observation and use of surface change data over rapidly evolving natural hazards, both as an aid to scientific understanding and to provide timely data to agencies responsible for the management and mitigation of natural disasters. We are adapting complex science algorithms for surface water extent to detect flooding, snow/water/ice classification to assist in transportation/ shipping forecasts, and repeat-pass change detection to detect disturbances. We are near completion of the development of a custom FPGA board to meet the specific memory and processing needs of L-band SAR processor algorithms and high speed interfaces to reformat and route raw radar data to/from the FPGA processor board. We have also developed a high fidelity Matlab model of the SAR processor that is modularized and parameterized for ease to prototype various SAR processor algorithms targeted for the FPGA. We will be testing the OBP and rapid response algorithms with UAVSAR data to determine the fidelity of the products.

  17. The National Shipbuilding Research Program. Automated Process Application in Steel Fabrication and Subassembly Facilities; Phase I (Process Analysis)

    Science.gov (United States)

    1999-05-01

    6 Automated Process Application in Steel Fabrication and Subassembly Facilities; Phase I ( Process Analysis ) U.S. DEPARTMENT OF THE NAVY CARDEROCK...Subassembly Facilities; Phase I ( Process Analysis ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e

  18. Prevalence of ESBL phenotype,blaCTX-M-1,blaSHV andblaTEM genes among uropathogenicEscherichia coli isolates from 3 military hospitals of Tehran, Iran

    Institute of Scientific and Technical Information of China (English)

    Farshad Nojoomi; Abdolmajid Ghasemian

    2016-01-01

    Objective:To determine the extended-spectrum beta-lactamase (ESBL) production and prevalence ofblaCTX-M-1,blaSHV andblaTEM genes among uropathogenic Escherichia coli(UPEC) isolates from 3 military hospitals of Tehran during 2015–2016. Methods: One-hundred and eleven isolates were adopted. The antibiotic susceptibility testing was conducted according to Clinical and Laboratory Standards Institute guidelines. The combine disk was used for phenotypicESBL production. The ceftazidimeMIC was conducted with the micro-broth dilution test. ThePCR assay was used to detect theblaCTX-M-1,blaSHV and blaTEM genes. Results:In the broth microdilution method, 103 (92.7%) isolates showed minimal inhibitory concentration (MIC)≥1µg/mL, and also in the combined disk method, 89 (80.1% of all) wereESBL positive. On the other hand, among 91 ceftazidime resistant isolates, 86 (77.4% of all) wereESBLpositive. The difference between the two methods forESBL confirmation was not significant. The result ofMIC was similar to the disk diffusion method in the detection of phenotypicESBL production. AmongESBLproducer isolates, the prevalence ofblaCTX-M-1, blaSHV andblaTEM was 77.4% (n= 86), 47.4% (n= 53) and 2.4% (n= 2), respectively. These genes were amplified in a wide rangeMIC of ceftazidime. Conclusions:The prevalence of multi-drug resistantUPEC andESBL positive isolates was high in military hospitals. The majority ofUPEC isolates amplifiedblaCTX-M-I andblaSHV typeβ-lactamase genes. One-third of isolates were positive in presence of both these genes. There was no relation between ceftazidimeMIC and presence of beta-lactamase genes.

  19. High prevalence of blaOXA-23 in Acinetobacter spp. and detection of blaNDM-1 in A. soli in Cuba: report from National Surveillance Program (2010–2012)

    Science.gov (United States)

    Quiñones, D.; Carvajal, I.; Perez, Y.; Hart, M.; Perez, J.; Garcia, S.; Salazar, D.; Ghosh, S.; Kawaguchiya, M.; Aung, M.S.; Kobayashi, N.

    2015-01-01

    As a first national surveillance of Acinetobacter in Cuba, a total of 500 Acinetobacter spp. isolates recovered from 30 hospitals between 2010 and 2012 were studied. Acinetobacter baumannii–calcoaceticus complex accounted for 96.4% of all the Acinetobacter isolates, while other species were detected at low frequency (A. junii 1.6%, A. lwoffii 1%, A. haemolyticus 0.8%, A. soli 0.2%). Resistance rates of isolates were 34–61% to third-generation cephalosporins, 49–50% to β-lactams/inhibitor combinations, 42–47% to aminoglycosides, 42–44% to carbapenems and 55% to ciprofloxacin. However, resistance rates to colistin, doxycycline, tetracycline and rifampin were less than 5%. Among carbapenem-resistant isolates, 75% harboured different blaOXA genes (OXA-23, 73%; OXA-24, 18%; OXA-58, 3%). The blaNDM-1 gene was identified in an A. soli strain, of which the species was confirmed by sequence analysis of 16S rRNA gene, rpoB, rpoB–rpoC and rpoL–rpoB intergenic spacer regions and gyrB. The sequences of blaNDM-1 and its surrounding genes were identical to those reported for plasmids of A. baumannii and A. lwoffi strains. This is the first report of blaNDM-1 in A. soli, together with a high prevalence of OXA-23 carbapenemase for carbapenem resistance in Acinetobacter spp. in Cuba. PMID:26236494

  20. High prevalence of blaOXA-23 in Acinetobacter spp. and detection of blaNDM-1 in A. soli in Cuba: report from National Surveillance Program (2010–2012

    Directory of Open Access Journals (Sweden)

    D. Quiñones

    2015-09-01

    Full Text Available As a first national surveillance of Acinetobacter in Cuba, a total of 500 Acinetobacter spp. isolates recovered from 30 hospitals between 2010 and 2012 were studied. Acinetobacter baumannii–calcoaceticus complex accounted for 96.4% of all the Acinetobacter isolates, while other species were detected at low frequency (A. junii 1.6%, A. lwoffii 1%, A. haemolyticus 0.8%, A. soli 0.2%. Resistance rates of isolates were 34–61% to third-generation cephalosporins, 49–50% to β-lactams/inhibitor combinations, 42–47% to aminoglycosides, 42–44% to carbapenems and 55% to ciprofloxacin. However, resistance rates to colistin, doxycycline, tetracycline and rifampin were less than 5%. Among carbapenem-resistant isolates, 75% harboured different blaOXA genes (OXA-23, 73%; OXA-24, 18%; OXA-58, 3%. The blaNDM-1 gene was identified in an A. soli strain, of which the species was confirmed by sequence analysis of 16S rRNA gene, rpoB, rpoB–rpoC and rpoL–rpoB intergenic spacer regions and gyrB. The sequences of blaNDM-1 and its surrounding genes were identical to those reported for plasmids of A. baumannii and A. lwoffi strains. This is the first report of blaNDM-1 in A. soli, together with a high prevalence of OXA-23 carbapenemase for carbapenem resistance in Acinetobacter spp. in Cuba.

  1. Processing and applications of carbon based nano-materials

    Science.gov (United States)

    Yu, Aiping

    Carbon-based nanomaterials, including single walled carbon nanotubes (SWNTs) and graphite nanoplatelets (GNPs, multi-layer graphene), possess exceptional electrical, thermal and mechanical properties coupled with high aspect ratio and high temperature stability. These unique properties have attracted increased attention during the past decade. These materials form the basis of the work presented here, which includes research targeting fabrication, processing and applications in new composites and devices. As-prepared SWNTs are typically contaminated with amorphous carbon as well as metal catalyst and graphitic nanoparticles. We have demonstrated an efficient approach for removing most of these impurities by the combination of nitric acid treatment and both low speed (2000 g) and high speed centrifugation (20,000 g). This approach gives rise to the highest-purified arc-discharge SWNTs which are almost free from impurities, and in addition are left in a low state of aggregation. The new purification process offers a convenient way to obtain different grade of SWNTs and allows the study of the effect purity on the thermal conductivity of SWNT epoxy composite. Purified functionalized SWNTs provide a significantly greater enhancement of the thermal conductivity, whereas AP-SWNTs allow the best electrical properties because of their ability to form efficient percolating network. We found that purified SWNTs provide ˜5 times greater enhancement of the thermal conductivity than the impure SWNT fraction demonstrating the significance of SWNTs quality for thermal management. The introduced GNPs have directed the thermal management project to a new avenue due to the significant improvement of the thermal conductivity of the composites in comparison with that of SWNTs. A novel process was demonstrated to achieve a 4-graphene layer structure referred to GNPs with a thickness of ˜2 nm. This material was embedded in an epoxy resin matrix and the measured thermal conductivity of

  2. Characterization of IncA/C conjugative plasmid harboring bla TEM-52 and bla CTX-M-15 extended-spectrum β-lactamases in clinical isolates of Escherichia coli in Tunisia.

    Science.gov (United States)

    Chouchani, C; El Salabi, A; Marrakchi, R; Ferchichi, L; Walsh, T R

    2012-06-01

    To characterize the extended-spectrum β-lactamases (ESBLs) as well as their genetic environment in different isolates of Escherichia coli from patients with repeated urinary tract infections, large multidrug resistance (MDR) plasmids have been found. Definitive evidence for the presence of an A/C incompatibility complex (IncA/C) plasmid in the MDR isolates was provided by the probing of plasmids extracted from the clinical isolates. Conjugation experiments showed that bla genes were transferred by conjugation from the ten E. coli clinical isolates to E. coli XL1-Blue recipient. A comparative restriction fragment length polymorphism (RFLP) analysis of these plasmids showed that they are genetically similar, while the overall similarity of these plasmids supports the likelihood of recent movements among these E. coli isolates. Polymerase chain reaction (PCR) amplification and sequencing of the amplicons showed that the IncA/C plasmids harbor two ESBLs, identified as TEM-52 and CTX-M-15. Analysis of the plasmid DNA surrounding the bla (CTX-M-15) gene in the clinical isolates under study revealed a partially truncated fragment of ISEcp1 tnpA transposase. This result indicates the variety of genetic events that have enabled associations between ISEcp1 sequences and bla (CTX-M-15) genes in these clinical isolates.

  3. Lysine N[superscript zeta]-Decarboxylation Switch and Activation of the [beta]-Lactam Sensor Domain of BlaR1 Protein of Methicillin-resistant Staphylococcus aureus

    Energy Technology Data Exchange (ETDEWEB)

    Borbulevych, Oleg; Kumarasiri, Malika; Wilson, Brian; Llarrull1, Leticia I.; Lee, Mijoon; Hesek, Dusan; Shi, Qicun; Peng, Jeffrey; Baker, Brian M.; Mobashery, Shahriar (Notre)

    2012-10-29

    The integral membrane protein BlaR1 of methicillin-resistant Staphylococcus aureus senses the presence of {beta}-lactam antibiotics in the milieu and transduces the information to the cytoplasm, where the biochemical events that unleash induction of antibiotic resistance mechanisms take place. We report herein by two-dimensional and three-dimensional NMR experiments of the sensor domain of BlaR1 in solution and by determination of an x-ray structure for the apo protein that Lys-392 of the antibiotic-binding site is posttranslationally modified by N{sup {zeta}}-carboxylation. Additional crystallographic and NMR data reveal that on acylation of Ser-389 by antibiotics, Lys-392 experiences N{sup {zeta}}-decarboxylation. This unique process, termed the lysine N{sup {zeta}}-decarboxylation switch, arrests the sensor domain in the activated ('on') state, necessary for signal transduction and all the subsequent biochemical processes. We present structural information on how this receptor activation process takes place, imparting longevity to the antibiotic-receptor complex that is needed for the induction of the antibiotic-resistant phenotype in methicillin-resistant S. aureus.

  4. The sudden dominance of blaCTX-M harbouring plasmids in Shigella spp. Circulating in Southern Vietnam.

    Directory of Open Access Journals (Sweden)

    Nhu Thi Khanh Nguyen

    Full Text Available BACKGROUND: Plasmid mediated antimicrobial resistance in the Enterobacteriaceae is a global problem. The rise of CTX-M class extended spectrum beta lactamases (ESBLs has been well documented in industrialized countries. Vietnam is representative of a typical transitional middle income country where the spectrum of infectious diseases combined with the spread of drug resistance is shifting and bringing new healthcare challenges. METHODOLOGY: We collected hospital admission data from the pediatric population attending the hospital for tropical diseases in Ho Chi Minh City with Shigella infections. Organisms were cultured from all enrolled patients and subjected to antimicrobial susceptibility testing. Those that were ESBL positive were subjected to further investigation. These investigations included PCR amplification for common ESBL genes, plasmid investigation, conjugation, microarray hybridization and DNA sequencing of a bla(CTX-M encoding plasmid. PRINCIPAL FINDINGS: We show that two different bla(CTX-M genes are circulating in this bacterial population in this location. Sequence of one of the ESBL plasmids shows that rather than the gene being integrated into a preexisting MDR plasmid, the bla(CTX-M gene is located on relatively simple conjugative plasmid. The sequenced plasmid (pEG356 carried the bla(CTX-M-24 gene on an ISEcp1 element and demonstrated considerable sequence homology with other IncFI plasmids. SIGNIFICANCE: The rapid dissemination, spread of antimicrobial resistance and changing population of Shigella spp. concurrent with economic growth are pertinent to many other countries undergoing similar development. Third generation cephalosporins are commonly used empiric antibiotics in Ho Chi Minh City. We recommend that these agents should not be considered for therapy of dysentery in this setting.

  5. Diverse Genetic Array of blaCTXM-15 in Escherichia coli: A Single-Center Study from India.

    Science.gov (United States)

    Maurya, Anand Prakash; Mishra, Shweta; Talukdar, Anupam Das; Dhar Chanda, Debadatta; Chakravarty, Atanu; Bhattacharjee, Amitabha

    2016-01-01

    CTX-M-15 is a chief contributor for expanded-spectrum cephalosporin and monobactam resistance in India, complicating treatment options. In this study, we have investigated genetic context of CTX-M-15 in Escherichia coli and their transmission dynamics in a tertiary referral hospital of India. A total of 198 isolates were collected, of which 66 were harboring blaCTXM-15. Among them, 14 isolates were carrying a single CTX-M-15 gene and 52 were harboring multiple extended-spectrum β-lactamase genes along with blaCTX-M-15. The resistance gene was flanked by tnpA, ISEcp1, IS26, and ORF477 in 10 different arrangements. The resistance determinant was horizontally transferable through F, W, I1, and P Inc types of plasmids. Restriction mapping of plasmids showed a variable band pattern even within the same Inc types. Minimum inhibitory concentration was found above the breakpoint level against expanded-spectrum cephalosporins and monobactam while susceptible against carbapenems. blaCTX-M-15 was highly stable and sustained in the cell after 115 serial passages. In pulse-field gel electrophoresis, eight pulsotypes of E. coli were found to be responsible for the spread of blaCTX-M-15 in the tertiary referral center. We conclude that the presence of CTX-M-15 in the heterogeneous group of E. coli is highly alarming in terms of infection control and it may require regular monitoring, so as to formulate appropriate antibiotic policy to stop the spread of this resistance determinant.

  6. Draft Genome Sequence of a Colistin-Resistant Klebsiella pneumoniae Clinical Strain Carrying the blaNDM-1 Carbapenemase Gene

    Science.gov (United States)

    Yao, Zhihong; Feng, Yu; Lin, Ji

    2017-01-01

    ABSTRACT Klebsiella pneumoniae strain WCHKP1845, recovered from the sputum of a patient with pneumonia, was resistant to colistin and carried the carbapenemase gene blaNDM-1. Here, we report its 5.4-Mb draft genome sequence, comprising 140 contigs with an average 57.33% G+C content. The genome contains 5,118 coding sequences and 88 tRNA genes. PMID:28209835

  7. Limited transmission of bla(CTX-M-9)-type-positive Escherichia coli between humans and poultry in Vietnam.

    Science.gov (United States)

    Ueda, Shuhei; Ngan, Bui Thi Kim; Huong, Bui Thi Mai; Hirai, Itaru; Tuyen, Le Danh; Yamamoto, Yoshimasa

    2015-01-01

    We examined whether Escherichia coli isolates that produce CTX-M-9-type extended-spectrum β-lactamases (ESBL) are transferred between humans and chickens in a Vietnamese community. The phylogenetic group compositions, sequence types, antimicrobial resistance profiles, the prevalence of plasmid antibiotic resistance genes, and the plasmid replicon types generally differed between the human and chicken E. coli isolates. Our results suggest that transmission of the bla(CTX-M-9)-positive E. coli between humans and poultry was limited.

  8. Virulence of Klebsiella pneumoniae isolates harboring bla KPC-2 carbapenemase gene in a Caenorhabditis elegans model.

    Science.gov (United States)

    Lavigne, Jean-Philippe; Cuzon, Gaelle; Combescure, Christophe; Bourg, Gisèle; Sotto, Albert; Nordmann, Patrice

    2013-01-01

    Klebsiella pneumoniae carbapenemase (KPC) is a carbapenemase increasingly reported worldwide in Enterobacteriaceae. The aim of this study was to analyze the virulence of several KPC-2-producing K. pneumoniae isolates. The studied strains were (i) five KPC-2 clinical strains from different geographical origins, belonging to different ST-types and possessing plasmids of different incompatibility groups; (ii) seven transformants obtained after electroporation of either these natural KPC plasmids or a recombinant plasmid harboring only the bla KPC-2 gene into reference strains K. pneumoniae ATCC10031/CIP53153; and (iii) five clinical strains cured of plasmids. The virulence of K. pneumoniae isolates was evaluated in the Caenorhabditis elegans model. The clinical KPC producers and transformants were significantly less virulent (LT50: 5.5 days) than K. pneumoniae reference strain (LT50: 4.3 days) (pKPC-2 positive K. pneumoniae ST258 strains and reference strains containing plasmids extracted from K. pneumoniae ST258 strains had a higher virulence than KPC-2 strains belonging to other ST types (LT50: 5 days vs. 6 days, pKPC-2 gene itself was not associated to increased virulence.

  9. Bacillus licheniformis BlaR1 L3 loop is a zinc metalloprotease activated by self-proteolysis.

    Directory of Open Access Journals (Sweden)

    Stéphanie Berzigotti

    Full Text Available In Bacillus licheniformis 749/I, BlaP β-lactamase is induced by the presence of a β-lactam antibiotic outside the cell. The first step in the induction mechanism is the detection of the antibiotic by the membrane-bound penicillin receptor BlaR1 that is composed of two functional domains: a carboxy-terminal domain exposed outside the cell, which acts as a penicillin sensor, and an amino-terminal domain anchored to the cytoplasmic membrane, which works as a transducer-transmitter. The acylation of BlaR1 sensor domain by the antibiotic generates an intramolecular signal that leads to the activation of the L3 cytoplasmic loop of the transmitter by a single-point cleavage. The exact mechanism of L3 activation and the nature of the secondary cytoplasmic signal launched by the activated transmitter remain unknown. However, these two events seem to be linked to the presence of a HEXXH zinc binding motif of neutral zinc metallopeptidases. By different experimental approaches, we demonstrated that the L3 loop binds zinc ion, belongs to Gluzincin metallopeptidase superfamily and is activated by self-proteolysis.

  10. Ultrastructural changes caused by polymyxin B and meropenem in multiresistant Klebsiella pneumoniae carrying blaKPC-2 gene.

    Science.gov (United States)

    Scavuzzi, Alexsandra Maria Lima; Alves, Luiz Carlos; Veras, Dyana Leal; Brayner, Fábio André; Lopes, Ana Catarina Souza

    2016-12-01

    The ultrastructural alterations caused by polymyxin B and meropenem and by the association between polymyxin B and meropenem were investigated in two multiresistant isolates of Klebsiella pneumoniae (K3-A2 and K12-A2) carriers of blaKPC-2, coming from infection and colonization in patients in a public hospital in Recife, Brazil. The ultrastructural changes were detected by transmission electron microscopy and scanning. The susceptibility of the isolates to antimicrobials was tested by the disc diffusion method and microdilution in broth. The analysis by electron microscopy showed that the isolates presented morphological and ultrastructural cellular changes when subjected to a clinically relevant concentration of antimicrobials alone or in combination. When subjected to meropenem, they presented retraction of the cytoplasmic material, rupture of the cell wall and extravasation of the cytoplasmic content. When submitted to polymyxin B, the isolates showed condensation of the ribosomes, DNA clotting, cell wall thickening and the presence of membrane compartment. When subjected to polymyxin B and meropenem in combination, the isolates showed a higher intensity of the ultrastructural changes visualized. This is the first report of the ultrastructural changes caused by polymyxin B and meropenem in multiresistant isolates of K. pneumoniae carriers of the blaKPC-2 gene. It should be noted that even when the K. pneumoniae isolates were multiresistant carriers of the blaKPC-2 gene, they underwent important structural change owing to the action of polymyxin B and meropenem.

  11. Within-Host and Population Transmission of blaOXA-48 in K. pneumoniae and E. coli.

    Science.gov (United States)

    Haverkate, Manon R; Dautzenberg, Mirjam J D; Ossewaarde, Tjaco J M; van der Zee, Anneke; den Hollander, Jan G; Troelstra, Annet; Bonten, Marc J M; Bootsma, Martin C J

    2015-01-01

    During a large hospital outbreak of OXA-48 producing bacteria, most K. pneumoniaeOXA-48 isolates were phenotypically resistant to meropenem or imipenem, whereas most E. coliOXA-48 isolates were phenotypically susceptible to these antibiotics. In the absence of molecular gene-detection E. coliOXA-48 could remain undetected, facilitating cross-transmission and horizontal gene transfer of blaOXA-48. Based on 868 longitudinal molecular microbiological screening results from patients carrying K. pneumoniaeOXA-48 (n = 24), E. coliOXA-48 (n = 17), or both (n = 40) and mathematical modelling we determined mean durations of colonisation (278 and 225 days for K. pneumoniaeOXA-48 and E. coliOXA-48, respectively), and horizontal gene transfer rates (0.0091/day from K. pneumoniae to E. coli and 0.0015/day vice versa). Based on these findings the maximum effect of horizontal gene transfer of blaOXA-48 originating from E. coliOXA-48 on the basic reproduction number (R0) is 1.9%, and it is, therefore, unlikely that phenotypically susceptible E. coliOXA-48 will contribute significantly to the spread of blaOXA-48.

  12. Prior processes and their applications nonparametric Bayesian estimation

    CERN Document Server

    Phadia, Eswar G

    2016-01-01

    This book presents a systematic and comprehensive treatment of various prior processes that have been developed over the past four decades for dealing with Bayesian approach to solving selected nonparametric inference problems. This revised edition has been substantially expanded to reflect the current interest in this area. After an overview of different prior processes, it examines the now pre-eminent Dirichlet process and its variants including hierarchical processes, then addresses new processes such as dependent Dirichlet, local Dirichlet, time-varying and spatial processes, all of which exploit the countable mixture representation of the Dirichlet process. It subsequently discusses various neutral to right type processes, including gamma and extended gamma, beta and beta-Stacy processes, and then describes the Chinese Restaurant, Indian Buffet and infinite gamma-Poisson processes, which prove to be very useful in areas such as machine learning, information retrieval and featural modeling. Tailfree and P...

  13. 40 CFR 408.10 - Applicability; description of the farm-raised catfish processing subcategory.

    Science.gov (United States)

    2010-07-01

    ...-raised catfish processing subcategory. 408.10 Section 408.10 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Farm-Raised Catfish Processing Subcategory § 408.10 Applicability; description of the farm-raised catfish processing subcategory. The provisions of this subpart are applicable to...

  14. 40 CFR 405.60 - Applicability; description of the natural and processed cheese subcategory.

    Science.gov (United States)

    2010-07-01

    ... natural and processed cheese subcategory. 405.60 Section 405.60 Protection of Environment ENVIRONMENTAL... CATEGORY Natural and Processed Cheese Subcategory § 405.60 Applicability; description of the natural and processed cheese subcategory. The provisions of this subpart are applicable to discharges resulting from...

  15. 40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the beet... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory....

  16. β-Lactamases Encoded by blaCTX-M Group I Genes as Determinants of Resistance of Esbl-Positive Enterobacteriaceae in European Soldiers in Tropical Mali.

    Science.gov (United States)

    Hagen, Ralf Matthias; Hinz, Rebecca; Frickmann, Hagen

    2015-12-01

    ESBL (extended-spectrum-β-lactamase)-positive Enterobacteriaceae, which colonized European soldiers in tropical Western African Mali, were subjected to a molecular assessment of their resistance determinants. By doing so, a better insight into the locally endemic pattern of ESBL-associated β-lactamase genes was aspired. From a previous study on diarrhea in European soldiers on deployment in tropical Mali, 15 ESBL-positive Escherichia coli with demonstrated high clonal diversity and one positive Klebsiella pneumoniae were assessed. Polymerase chain reactions (PCRs) for blaTEM and blaSHV β-lactamase genes with subsequent sequencing for the discrimination of ESBL- and non-ESBL variants were performed, followed by four group-specific PCRs for blaCTX-M genes. Non-ESBL-associated blaTEM-1 was identified in six out of 15 (40%) E. coli strains, while 100% of the assessed strains were positive for group I blaCTX-M . Considering the known clonal diversity of the assessed strains, the striking restriction to one group of blaCTX-M genes accounting for the ESBL phenotypes of the isolates suggests little genetic exchange in the local setting. Under such circumstances of restricted numbers of locally endemic target genes, PCR-based screening approaches for ESBL colonization might be promising.

  17. blaCTX-M-15 carried by IncF-type plasmids is the dominant ESBL gene in Escherichia coli and Klebsiella pneumoniae at a hospital in Ghana.

    Science.gov (United States)

    Agyekum, Alex; Fajardo-Lubián, Alicia; Ansong, Daniel; Partridge, Sally R; Agbenyega, Tsiri; Iredell, Jonathan R

    2016-04-01

    Escherichia coli and Klebsiella pneumoniae producing extended-spectrum β-lactamases (ESBLs) are among the most multidrug-resistant pathogens in hospitals and are spreading worldwide. Horizontal gene transfer and spread of high-risk clones are involved in ESBL dissemination. Investigation of the resistance phenotypes of 101 consecutive clinical E. coli (n=58) and K. pneumoniae (n=43) isolated at the Komfo Anokye Teaching Hospital in Ghana over 3 months revealed 63 (62%) with an ESBL phenotype. All 63 had a blaCTX-M gene, and sequence analysis showed that 62 of these were blaCTX-M-15. blaCTX-M-15 was linked to ISEcp1 and orf477Δ in all isolates, and most isolates also carried blaTEM, aac(3)-II, aacA4cr, and/or blaOXA-30 genes on IncF plasmids. XbaI/pulsed-field electrophoresis showed heterogeneity among isolates of both species, suggesting that blaCTX-M-15 dissemination is caused by horizontal gene transfer rather than clonal spread of these species in Ghana.

  18. Complete Sequence of a Novel IncR-F33:A–:B– Plasmid, pKP1034, Harboring fosA3, blaKPC-2, blaCTX-M-65, blaSHV-12, and rmtB from an Epidemic Klebsiella pneumoniae Sequence Type 11 Strain in China

    Science.gov (United States)

    Xiang, Dai-Rong; Li, Jun-Jie; Sheng, Zi-Ke; Yu, Hai-Ying; Deng, Mei; Bi, Sheng; Hu, Fei-Shu; Chen, Wei; Xue, Xiao-Wei; Zhou, Zhi-Bo; Doi, Yohei; Li, Lan-Juan

    2015-01-01

    A high fosfomycin resistance rate was observed in Klebsiella pneumoniae carbapenemase (KPC)-producing K. pneumoniae (KPC-KP) in our previous study, but little is known about its mechanisms. In this study, we explored the prevalence of plasmid-mediated fosfomycin resistance determinants among fosfomycin-resistant KPC-KP strains from a Chinese university hospital and determined the complete sequence of a novel fosA3-carrying plasmid isolated from an epidemic K. pneumoniae sequence type (ST) 11 strain. A total of 97 KPC-KP strains were studied, of which 57 (58.8%) were resistant to fosfomycin, including 44 (45.4%) harboring fosA3 and 1 harboring fosA. All fosA3-positive strains belonged to the dominant ST11-pulse type (PT) A clone according to multilocus sequence typing and pulsed-field gel electrophoresis, suggesting clonal dissemination. The fosA-positive isolate belonged to ST11-PTE. The fosA3-carrying plasmid pKP1034 is 136,848 bp in length and is not self-transmissible. It is a multireplicon plasmid belonging to IncR-F33:A−: B−. Besides fosA3, a variety of other resistance determinants, including blaKPC-2, rmtB, blaCTX-M-65, and blaSHV-12, are identified in pKP1034, which would allow for coselection of fosA3 by most β-lactams and/or aminoglycosides and facilitate its dissemination despite limited use of fosfomycin in China. Detailed comparisons with related plasmids revealed that pKP1034 is highly mosaic and might have evolved from alarming recombination of the blaKPC-2-carrying plasmid pKPC-LK30 from Taiwan and the epidemic fosA3-carrying plasmid pHN7A8 from mainland China. PMID:26666939

  19. Application of finite-element-methods in food processing

    DEFF Research Database (Denmark)

    Risum, Jørgen

    2004-01-01

    Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given.......Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given....

  20. ESBL, plasmidic AmpC, and associated quinolone resistance determinants in coliforms isolated from hospital effluent: first report of qnrB2, qnrB9, qnrB19, and blaCMY-4 in Algeria.

    Science.gov (United States)

    Anssour, Lynda; Messai, Yamina; Derkaoui, Meriem; Alouache, Souhila; Estepa, Vanesa; Somalo, Sergio; Torres, Carmen; Bakour, Rabah

    2014-04-01

    The characterization of extended-spectrum beta-lactamases , plasmidic AmpC (pAmpC), and associated plasmid-mediated quinolone resistance (PMQR) determinants in cefotaxime-resistant coliforms isolated from hospital effluent in Algiers showed blaCTX-M genes in 89%, blaTEM-1 in 79·8%, and pAmpC genes (blaCIT) in 2·7% isolates. Association of ISEcp1B with blaCTX-M was found in all CTX-M+ isolates, and 97·2% harboured class 1 integrons. Sequencing showed blaCTX-M-15, blaCTX-M-3, and blaCMY-4 genes. blaCTX-M-3 and blaCTX-M-15 were located in Inc L/M conjugative plasmids. The PMQR determinants identified were qnrB1, qnrB2, qnrB9, qnrB19, qnrS2, and aac(6')-Ib-cr. qnrB2, qnrB9, qnrB19, and blaCMY-4 are described for the first time in Algeria and qnrB19 for the first time in non-clinical environments. This study highlights the major potential role of hospital effluents as providers of resistance genes to natural environments.

  1. An Application of Filtered Renewal Processes in Hydrology

    Directory of Open Access Journals (Sweden)

    Mario Lefebvre

    2014-01-01

    Full Text Available Filtered renewal processes are used to forecast daily river flows. For these processes, contrary to filtered Poisson processes, the time between consecutive events is not necessarily exponentially distributed, which is more realistic. The model is applied to obtain one- and two-day-ahead forecasts of the flows of the Delaware and Hudson Rivers, both located in the United States. Better results are obtained than with filtered Poisson processes, which are often used to model river flows.

  2. Principles of computer processing of Landsat data for geologic applications

    Science.gov (United States)

    Taranik, James V.

    1978-01-01

    The main objectives of computer processing of Landsat data for geologic applications are to improve display of image data to the analyst or to facilitate evaluation of the multispectral characteristics of the data. Interpretations of the data are made from enhanced and classified data by an analyst trained in geology. Image enhancements involve adjustments of brightness values for individual picture elements. Image classification involves determination of the brightness values of picture elements for a particular cover type. Histograms are used to display the range and frequency of occurrence of brightness values. Landsat-1 and -2 data are preprocessed at Goddard Space Flight Center (GSFC) to adjust for the detector response of the multispectral scanner (MSS). Adjustments are applied to minimize the effects of striping, adjust for bad-data lines and line segments and lost individual pixel data. Because illumination conditions and landscape characteristics vary considerably and detector response changes with time, the radiometric adjustments applied at GSFC are seldom perfect and some detector striping remain in Landsat data. Rotation of the Earth under the satellite and movements of the satellite platform introduce geometric distortions in the data that must also be compensated for if image data are to be correctly displayed to the data analyst. Adjustments to Landsat data are made to compensate for variable solar illumination and for atmospheric effects. GeoMetric registration of Landsat data involves determination of the spatial location of a pixel in. the output image and the determination of a new value for the pixel. The general objective of image enhancement is to optimize display of the data to the analyst. Contrast enhancements are employed to expand the range of brightness values in Landsat data so that the data can be efficiently recorded in a manner desired by the analyst. Spatial frequency enhancements are designed to enhance boundaries between features

  3. Excitation energy transfer processes in condensed matter theory and applications

    CERN Document Server

    Singh, Jai

    1994-01-01

    Applying a unified quantum approach, contributors offer fresh insights into the theoretical developments in the excitation energy transfer processes in condensed matter This comprehensive volume examines Frenkel and Wannier excitonic processes; rates of excitonic processes; theory of laser sputter and polymer ablation; and polarons, excitonic polarons and self-trapping

  4. Image-processing pipelines: applications in magnetic resonance histology

    Science.gov (United States)

    Johnson, G. Allan; Anderson, Robert J.; Cook, James J.; Long, Christopher; Badea, Alexandra

    2016-03-01

    Image processing has become ubiquitous in imaging research—so ubiquitous that it is easy to loose track of how diverse this processing has become. The Duke Center for In Vivo Microscopy has pioneered the development of Magnetic Resonance Histology (MRH), which generates large multidimensional data sets that can easily reach into the tens of gigabytes. A series of dedicated image-processing workstations and associated software have been assembled to optimize each step of acquisition, reconstruction, post-processing, registration, visualization, and dissemination. This talk will describe the image-processing pipelines from acquisition to dissemination that have become critical to our everyday work.

  5. Handbook of polymer nanocomposites processing, performance and application

    CERN Document Server

    Mohanty, Amar; Misra, Manjusri; Kar, Kamal K; Pandey, Jitendra; Rana, Sravendra; Takagi, Hitoshi; Nakagaito, Antonio; Kim, Hyun-Joong

    Volume A forms one volume of a Handbook about Polymer Nanocomposites. In some 20 chapters the preparation, architecture, characterisation, properties and application of polymer nanocomposites are discussed by experts in their respective fields.

  6. Semiconductor nanostructures for optoelectronic devices processing, characterization and applications

    CERN Document Server

    Yi, Gyu-Chul

    2012-01-01

    This book summarizes the current state of semiconductor nanodevice development, examining nanowires, nanorods, hybrid semiconductor nanostructures, wide bandgap nanostructures for visible light emitters and graphene and describing their device applications.

  7. 7 CFR 273.2 - Office operations and application processing.

    Science.gov (United States)

    2010-01-01

    ... of perjury, the truth of the information contained in the application, including the information...) Notice of right to file. The State agency shall post signs in the certification office which explain...

  8. Application of food irradiation processes to developing countries

    OpenAIRE

    Langerak, D.Is.; Cramwinckel, A.B.; Hollman, P.C.; Jong, de, P.; Labrijn, J.F.; Slangen, H.J.; Stegeman, H.; Veen, van der, A.; Wolters, Th.C.; Oortwijn, H.

    1986-01-01

    Sprouting of- and fungal attack on tuber, bulb and foot products is a common problem to most countries. Sprouting can be delayed by storage at low temperature, and partly prevented by a proper use of chemical sprout inhibitors. Cooling is, however, energy consuming, expensive and not practicabie everywhere. Chemicals are cheaper, but their application is not always reliable, especially at temperatures higher than 15'C. Moreover in some countries the application of chemical inhibitors is prohi...

  9. Dispersal of Carbapenemase blaVIM-1 Gene Associated with Different Tn402 Variants, Mercury Transposons, and Conjugative Plasmids in Enterobacteriaceae and Pseudomonas aeruginosa▿

    Science.gov (United States)

    Tato, Marta; Coque, Teresa M.; Baquero, Fernando; Cantón, Rafael

    2010-01-01

    The emergence of blaVIM-1 within four different genetic platforms from distinct Enterobacteriaceae and Pseudomonas aeruginosa isolates in an area with a low prevalence of metallo-β-lactamase producers is reported. Forty-three VIM-1-producing isolates (including 19 Enterobacter cloacae, 2 Escherichia coli, and 2 P. aeruginosa isolates, 18 Klebsiella pneumoniae isolate, and 2 Klebsiella oxytoca isolate) recovered from 2005 to 2007 and corresponding to 15 pulsed-field gel electrophoresis types were studied. The Enterobacteriaceae isolates corresponded to a hospital outbreak, and the P. aeruginosa isolates were sporadically recovered. The genetic context of the integrons carrying blaVIM-1 (arbitrarily designated types A, B, C, and D) was characterized by PCR mapping based on known Tn402 and mercury transposons and further sequencing. Among Enterobacteriaceae isolates, blaVIM-1 was part of integrons located either in an In2-Tn402 element linked to Tn21 (type A; In110-blaVIM-1-aacA4-aadA1) or in a Tn402 transposon lacking the whole tni module [type B; In113-blaVIM-1-aacA4-dhfrII (also called dfrB1)-aadA1-catB2] and the transposon was associated with an IncHI2 or IncI1 plasmid, respectively. Among P. aeruginosa isolates, blaVIM-1 was part of a new gene cassette array located in a defective Tn402 transposon carrying either tniBΔ3 and tniA (type C; blaVIM-1-aadA1) or tniC and ΔtniQ (type D; blaVIM-1-aadB), and both Tn402 variants were associated with conjugative plasmids of 30 kb. The dissemination of blaVIM-1 was associated with different genetic structures and bacterial hosts, depicting a complex emergence and evolutionary network scenario in our facility, Ramón y Cajal University Hospital, Madrid, Spain. Knowledge of the complex epidemiology of blaVIM-1 is necessary to control this emerging threat. PMID:19901094

  10. Approach for long term environmental parameters monitoring process using data acquisition devices and high level applications for data processing

    Science.gov (United States)

    Croitoru, Bogdan; Boca, Loredana; Abrudean, Mihail; Joldes, Remus

    2010-11-01

    Present paper describes a long term monitoring process of few environmental parameters for evaluating green energy potential (wind energy and solar energy) of a small geographical area (~ 32 km2). The monitoring approach presented in this paper consists in: real-time data acquisition process using two real-time data acquisition devices (DAQ); a wireless network used for long distance data transmission in order to send all acquired data to a remote location for processing; Virtual Instrument (VI's) applications used for controlling data acquisition devices and the acquisition process; a network protocol analyzer used for a detailed analysis of the communication protocols and data packets; the management of the huge volume of sensor data by using a high level software application; long term sensor monitoring using a complex graphic software application. The measured environment parameters are the following: wind speed, wind direction, temperature, sun intensity and illumination, steel pylon vibrations on three axes.

  11. Application of Decision Tree Algorithm in Stamping Process

    Institute of Scientific and Technical Information of China (English)

    WANG Ying-chun; LI Da-yong; YIN Ji-long; PENG Ying-hong

    2005-01-01

    Various process parameters exert different effects in stamping process. In order to study the relationships among the process parameters of box stamping process, including the blank holder force, friction coefficient,depth of drawbead, offset and length of drawbead, the decision tree algorithm C4.5 was performed to generate the decision tree using the result data of the box stamping simulation. The design and improvement methods of the decision tree were presented. Potential and valuable rules were generated by traversing the decision tree, which plays an instructive role on the practical design. The rules show that the correct combination of blank holder force and setting of drawbead are the dominant contribution for controlling the cracking and wrinkling in box stamping process. In order to validate the rules, the stamping process for box was also performed. The experiment results show good agreement with the generated rules.

  12. Application of Quantum Process Calculus to Higher Dimensional Quantum Protocols

    Directory of Open Access Journals (Sweden)

    Simon J. Gay

    2014-07-01

    Full Text Available We describe the use of quantum process calculus to describe and analyze quantum communication protocols, following the successful field of formal methods from classical computer science. We have extended the quantum process calculus to describe d-dimensional quantum systems, which has not been done before. We summarise the necessary theory in the generalisation of quantum gates and Bell states and use the theory to apply the quantum process calculus CQP to quantum protocols, namely qudit teleportation and superdense coding.

  13. Affine diffusions and related processes simulation, theory and applications

    CERN Document Server

    Alfonsi, Aurélien

    2015-01-01

    This book gives an overview of affine diffusions, from Ornstein-Uhlenbeck processes to Wishart processes and it considers some related diffusions such as Wright-Fisher processes. It focuses on different simulation schemes for these processes, especially second-order schemes for the weak error. It also presents some models, mostly in the field of finance, where these methods are relevant and provides some numerical experiments. The book explains the mathematical background to understand affine diffusions and analyze the accuracy of the schemes.  

  14. Development and Application of Heat-integrated Aromatics Fractionation Process

    Institute of Scientific and Technical Information of China (English)

    Yang Weisheng; Kong Dejin; Tan Yongzhong

    2009-01-01

    The PRO/Ⅱ process simulation software was applied to carry out simulated calculation of the aromatics frac-tionation unit and the heat integrated rectification process was proposed for the aromatics fractionation section of the 1.0 Mt/a toluene disproportionation unit at the Zhenhai Refining and Chemical Company. The optimized operating parameters were obtained through the energy utilization analysis, process simulation, heat exchanger calculations and comparisons of utility consumption. The operation of commercialized unit has revealed that the design parameters of each rectification column were consistent with the operation results, and the utility consumption was about 47% lower than the waditional heat integrated process.

  15. Developing Friction Stir Welding Process Model for ICME Application

    Science.gov (United States)

    Yang, Yu-Ping

    2015-01-01

    A framework for developing a product involving manufacturing processes was developed with integrated computational materials engineering approach. The key component in the framework is a process modeling tool which includes a thermal model, a microstructure model, a thermo-mechanical, and a property model. Using friction stir welding (FSW) process as an example, development of the process modeling tool was introduced in detail. The thermal model and the microstructure model of FSW of steels were validated with the experiment data. The model can predict reasonable temperature and hardness distributions as observed in the experiment. The model was applied to predict residual stress and joint strength of a pipe girth weld.

  16. Technological advances in tellurite glasses properties, processing, and applications

    CERN Document Server

    Manzani, Danilo

    2017-01-01

    This book is the first to provide a comprehensive introduction to the synthesis, optical properties, and photonics applications of tellurite glasses. The book begins with an overview of tellurite glasses, followed by expert chapters on synthesis, properties, and state-of-the-art applications ranging from laser glass, optical fibers, and optical communications through color tuning, plasmonics, supercontinuum generation, and other photonic devices. The book provides in-depth information on the the structural, linear, and non-linear optical properties of tellurite glasses and their implications for device development. Real-world examples give the reader valuable insight into the applications of tellurite glass. A detailed discussion of glass production methods, including raw materials and melting and refining oxide- and fluoro-tellurite glasses, is also included. The book features an extensive reference list for further reading. This highly readable and didactic text draws on chemical composition, glass science,...

  17. Extending the applicability of the analytic hierarchy process

    NARCIS (Netherlands)

    Huizingh, K.R.E.; Vrolijk, H.C.J.

    1997-01-01

    The Analytic Hierarchy Process (AHP) has often been used to support decisions that only have to be made once. in this study, we explore whether the AHP can be applied to repetitive decision-making. We suggest a variant of the process to elicit implicit decision models that evaluate alternatives not

  18. Integrating ICT applications for farm business collaboration processes using FIspace

    NARCIS (Netherlands)

    Kruize, J.W.; Wolfert, J.; Goense, D.; Scholten, H.; Beulens, A.J.M.; Veenstra, T.

    2014-01-01

    Agri-Food Supply Chain Networks are required to increase production and to be transparent while reducing environmental impact. This challenges farm enterprises to innovate their production processes. These processes need to be supported by advanced ICT components that are developed by multiple vendo

  19. Applications of Enzymes in Oil and Oilseed Processing

    DEFF Research Database (Denmark)

    Xu, Xuebing

    conventionally high temperature conditioning or cooking is necessary. The good story in industry is the fish oil and olive oil processing. Good quality and higher oil yield have been achieved through the use of enzymes in the processing stages. For the refining stage, the use of enzymes for degumming has...

  20. Ambit processes; with applications to turbulence and tumour growth

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Schmiegel, Jürgen

    The concept of ambit processes is outlined. Such stochastic processes are of interest in spatio-temporal modelling, and they play a central role in recent studies of velocity fields in turbulence and of the growth of cancer tumours. These studies are reviewed, and some open problems are outlined....

  1. Mathematical modelling of anaerobic digestion processes: applications and future needs

    DEFF Research Database (Denmark)

    Batstone, Damien J.; Puyol, Daniel; Flores Alsina, Xavier

    2015-01-01

    Anaerobic process modelling is a mature and well-established field, largely guided by a mechanistic model structure that is defined by our understanding of underlying processes. This led to publication of the IWA ADM1, and strong supporting, analytical, and extension research in the 15 years sinc...

  2. Digital image processing for photo-reconnaissance applications

    Science.gov (United States)

    Billingsley, F. C.

    1972-01-01

    Digital image-processing techniques developed for processing pictures from NASA space vehicles are analyzed in terms of enhancement, quantitative restoration, and information extraction. Digital filtering, and the action of a high frequency filter in the real and Fourier domain are discussed along with color and brightness.

  3. Application of Process Modeling in a Software- Engineering Course

    Directory of Open Access Journals (Sweden)

    Gabriel Alberto García Mireles

    2001-11-01

    Full Text Available Coordination in a software development project is a critical issue in delivering a successful software product, within the constraints of time, functionality and budget agreed upon with the customer. One of the strategies for approaching this problem consists in the use of process modeling to document, evaluate, and redesign the software development process. The appraisal of the projects done in the Engineering and Methodology course of a program given at the Ensenada Center of Scientific Research and Higher Education (CICESE, from a process perspective, facilitated the identification of strengths and weaknesses in the development process used. This paper presents the evaluation of the practical portion of the course, the improvements made, and the preliminary results of using the process approach in the analysis phase of a software-development project.

  4. Model application for acid mine drainage treatment processes

    Directory of Open Access Journals (Sweden)

    Nantaporn Noosai, Vineeth Vijayan, Khokiat Kengskool

    2014-01-01

    Full Text Available This paper presents the utilization of the geochemical model, PHREEQC, to investigate the chemical treatment system for Acid Mine Drainage (AMD prior to the discharge. The selected treatment system consists of treatment processes commonly used for AMD including settling pond, vertical flow pond (VFP and caustic soda pond were considered in this study. The use of geochemical model for the treatment process analysis enhances the understanding of the changes in AMD’s chemistry (precipitation, reduction of metals, etc. in each process, thus, the chemical requirements (i.e., CaCO3 and NaOH for the system and the system’s treatment efficiency can be determined. The selected treatment system showed that the final effluent meet the discharge standard. The utilization of geochemical model to investigate AMD treatment processes can assist in the process design.

  5. Batch process. Application of CAE technique to a batch process; Bacchi purosesu eno CAE gijutsu no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.; Nakai, K.; Oba, S. [Aspentic Japan Co. Ltd. (Japan)

    1997-09-05

    This paper introduces recent topics of the application of the CAE technique to a batch process. A batch distillation modeling tool (BATCHFRAC) is aimed at modeling a distillation tower and a batch reactor for a batch process for fine chemical products, and is provided as an expanded additional function for ASPEN FLUS batch distillation. A batch process designing system (BATCH PLUS) is a comprehensive batch process simulator for efficiently carrying out the designing, the development or the analysis of a complicated recipe-based batch process concerning medical treatment, biotechnology and agriculture. A batch process information control system (Batch/21) is provided as a system having an expanded and additional function for a batch process of InfoPlus/21, an information control system which enables the observation, management and controlling of a process. 4 figs.

  6. Applications and challenges of plasma processes in nanobiotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, F; Colpo, P, E-mail: francois.rossi@jrc.ec.europa.eu [European Commission, Joint Research Centre, Institute for Health and Consumer Protection (IHCP), I-21020, Ispra (Italy)

    2011-05-04

    We present an overview of the possibilities offered by plasma technologies, in particular the combination plasma polymers deposition, colloidal lithography, e-beam lithography and microcontact printing, to produce micro- and nanostructured surfaces with chemical and topographical contrast for applications in nanobiotechnology. It is shown that chemical and topographical patterns can be obtained on different substrates, with dimensions down to a few tenths of 10 nm. The applications of these nanostructured surfaces in biology, biochemistry and biodetection are presented and the advantages and limitation of the plasma techniques in this context underlined.

  7. Plasma processes and applications in NanoBiotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, F; Colpo, P, E-mail: francois.rossi@jrc.ec.europa.eu [European Commission, Joint Research Centre, Institute for Health and Consumer Protection (IHCP), I-21020, Ispra (Italy)

    2010-11-01

    Nanostructured surfaces presenting chemical or topographical patterns are now being increasingly developed in nanobiotechnology. Major applications are related to cell culture models and biodetection. We show that plasma technologies, in particular the combination plasma polymers deposition and etching, together with colloidal lithography, e-beam lithography and microcontact printing, are essential tools to produce nanostructured surfaces. We show that chemical and topographical patterns can be obtained on different substrates, with dimensions down to some 10 nm. The applications of these nanostructured surfaces in biology and bio-detection are reviewed and the advantages and limitation of the techniques underlined.

  8. Fractional calculus with applications in mechanics vibrations and diffusion processes

    CERN Document Server

    Atanackovic, T; Stankovic, Bogoljub; Zorica , Dusan

    2014-01-01

    This book contains mathematical preliminaries in which basic definitions of fractional derivatives and spaces are presented. The central part of the book contains various applications in classical mechanics including fields such as: viscoelasticity, heat conduction, wave propagation and variational Hamilton-type principles. Mathematical rigor will be observed in the applications. The authors provide some problems formulated in the classical setting and some in the distributional setting. The solutions to these problems are presented in analytical form and these solutions are then analyzed num

  9. 40 CFR 408.270 - Applicability; description of the steamed and canned oyster processing subcategory.

    Science.gov (United States)

    2010-07-01

    ... steamed and canned oyster processing subcategory. 408.270 Section 408.270 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Steamed and Canned Oyster Processing Subcategory § 408.270 Applicability; description of the steamed and canned oyster processing subcategory. The provisions of this subpart...

  10. Structural Variabilities in β-Lactamase (blaA of Different Biovars of Yersinia enterocolitica: Implications for β-Lactam Antibiotic and β-Lactamase Inhibitor Susceptibilities.

    Directory of Open Access Journals (Sweden)

    Neelja Singhal

    Full Text Available Yersiniosis caused by Yersinia enterocolitica has been reported from all continents. The bacterial species is divided into more than fifty serovars and six biovars viz. 1A, 1B, 2, 3, 4 and 5 which differ in geographical distribution, ecological niches and pathogenicity. Most Y.enterocolitica strains harbor chromosomal genes for two β-lactamases, blaA an Ambler class A penicillinase and blaB an Ambler class C inducible cephalosporinase. In the present study, susceptibility to b-lactam antibiotics and β-lactamase inhibitor was studied for Y. enterocolitica strains of biovars 1A, 1B, 2 and 4. We observed that β-lactamases were expressed differentially among strains of different biovars. To understand the molecular mechanisms underlying such differential expression, the sequences of genes and promoters of blaA were compared. Also, the variants of blaA present in different biovars were modeled and docked with amoxicillin and clavulanic acid. The mRNA secondary structures of blaA variants were also predicted in-silico. Our findings indicated that neither variations in the promoter regions, nor the secondary structures of mRNA contributed to higher/lower expression of blaA in different biovars. Analysis of H-bonding residues of blaA variants with amoxicillin and clavulanic acid revealed that if amino acid residues of a β-lactamase interacting with amoxicillin and the clavulanic acid were similar, clavulanic acid was effective in engaging the enzyme, accounting for a significant reduction in MIC of amoxicillin-clavulanate. This finding might aid in designing better β-lactamase inhibitors with improved efficiencies in future.

  11. Structural Variabilities in β-Lactamase (blaA) of Different Biovars of Yersinia enterocolitica: Implications for β-Lactam Antibiotic and β-Lactamase Inhibitor Susceptibilities.

    Science.gov (United States)

    Singhal, Neelja; Srivastava, Abhishikha; Kumar, Manish; Virdi, Jugsharan Singh

    2014-01-01

    Yersiniosis caused by Yersinia enterocolitica has been reported from all continents. The bacterial species is divided into more than fifty serovars and six biovars viz. 1A, 1B, 2, 3, 4 and 5 which differ in geographical distribution, ecological niches and pathogenicity. Most Y.enterocolitica strains harbor chromosomal genes for two β-lactamases, blaA an Ambler class A penicillinase and blaB an Ambler class C inducible cephalosporinase. In the present study, susceptibility to b-lactam antibiotics and β-lactamase inhibitor was studied for Y. enterocolitica strains of biovars 1A, 1B, 2 and 4. We observed that β-lactamases were expressed differentially among strains of different biovars. To understand the molecular mechanisms underlying such differential expression, the sequences of genes and promoters of blaA were compared. Also, the variants of blaA present in different biovars were modeled and docked with amoxicillin and clavulanic acid. The mRNA secondary structures of blaA variants were also predicted in-silico. Our findings indicated that neither variations in the promoter regions, nor the secondary structures of mRNA contributed to higher/lower expression of blaA in different biovars. Analysis of H-bonding residues of blaA variants with amoxicillin and clavulanic acid revealed that if amino acid residues of a β-lactamase interacting with amoxicillin and the clavulanic acid were similar, clavulanic acid was effective in engaging the enzyme, accounting for a significant reduction in MIC of amoxicillin-clavulanate. This finding might aid in designing better β-lactamase inhibitors with improved efficiencies in future.

  12. Structural Variabilities in β-Lactamase (blaA) of Different Biovars of Yersinia enterocolitica: Implications for β-Lactam Antibiotic and β-Lactamase Inhibitor Susceptibilities

    Science.gov (United States)

    Singhal, Neelja; Srivastava, Abhishikha; Kumar, Manish; Virdi, Jugsharan Singh

    2015-01-01

    Yersiniosis caused by Yersinia enterocolitica has been reported from all continents. The bacterial species is divided into more than fifty serovars and six biovars viz. 1A, 1B, 2, 3, 4 and 5 which differ in geographical distribution, ecological niches and pathogenicity. Most Y.enterocolitica strains harbor chromosomal genes for two β-lactamases, blaA an Ambler class A penicillinase and blaB an Ambler class C inducible cephalosporinase. In the present study, susceptibility to b-lactam antibiotics and β-lactamase inhibitor was studied for Y. enterocolitica strains of biovars 1A, 1B, 2 and 4. We observed that β-lactamases were expressed differentially among strains of different biovars. To understand the molecular mechanisms underlying such differential expression, the sequences of genes and promoters of blaA were compared. Also, the variants of blaA present in different biovars were modeled and docked with amoxicillin and clavulanic acid. The mRNA secondary structures of blaA variants were also predicted in-silico. Our findings indicated that neither variations in the promoter regions, nor the secondary structures of mRNA contributed to higher/lower expression of blaA in different biovars. Analysis of H-bonding residues of blaA variants with amoxicillin and clavulanic acid revealed that if amino acid residues of a β-lactamase interacting with amoxicillin and the clavulanic acid were similar, clavulanic acid was effective in engaging the enzyme, accounting for a significant reduction in MIC of amoxicillin-clavulanate. This finding might aid in designing better β-lactamase inhibitors with improved efficiencies in future. PMID:25919756

  13. Design and Application of Economical Process Control Charts

    Directory of Open Access Journals (Sweden)

    S.S.N. Murthy

    1997-01-01

    Full Text Available Statistical quality control techniques are useful in monitoring the process behaviour. Attribute control charts are widely used in process control. The selection of sample size, sampling interval and control width of the control chart is important in minimising the quality costs. Control chart parameters, like 3delta controlimits and fixed fraction sampling at conveniently selected sampling intervals result in deplovable cost penalties in quality control. The best selection of these parameters depends on several process parameters,like frequency of occupancy of a shift in the process, cost of sampling, cost of investigation for finding assignable cause, probability of false alarms, penalty cost of defectives and process correction cost. A general model has been developed to determine the total quality cost as a function of these parameters. Probability of not identifying a process shift (Beeta-risk and probability of wrongly. concluding the process got shifted (alpha-risk are considered in developing the model. This cost equation is optimised to determine optimum values control chart parameters. Fibonacci search is used to quicken the analytical method or determining optimum sampling size and control width. The proposals made by Duncan, Montgomery, Gibra and Chiu for determining the optimum control chart parameters are critically examined and compared with the present model. Case studies were conducted in two foundries. Optimum control chart parameters in casting of cylinder liners and cast plates are determined. It has been found that quality costs are considerably reduced by using optimally designed control chart parameters with proposed method.

  14. Application of DLTS to silicon solar cell processing

    Energy Technology Data Exchange (ETDEWEB)

    Reehal, H.S. [South Bank University, London (United Kingdom). School of Electrical, Electronic and Information Engineering; Lesniak, M.P. [B and W Ltd., Epsom (United Kingdom); Hughes, A.E. [BP Oil Technology Centre, Sunbury-on-Thames (United Kingdom)

    1996-03-14

    Deep level transient spectroscopy (DLTS) has been employed to study the cause of minority carrier lifetime degradation observed during the development phase of a single crystal solar cell production process. Results on float-zone (FZ) samples showed that this was due to Fe unintentionally introduced at low levels (close to or below the detection limit of conventional analytical techniques) during cell processing and that DLTS of FZ wafers can be used as a highly sensitive monitor of process impurities. The DLTS spectra of processed FZ wafers showed a single trap, 0.53 eV away from the band edge and with a concentration of {approx_equal} 10{sup 14} cm{sup -3}, attributable to an Fe-B complex. The feature was not present before processing. In Czochralski (CZ) wafers the situation was more complex. Two major Fe related majority carriers traps were observed in both seed-end and crucible-end wafers taken through the complete process cycle. One was consistent with the Fe-B complex whilst the other (at 0.33 eV from the band edge) was identified as an Fe-O complex. The concentrations of these traps lay in the range 10{sup 12}-10{sup 13} cm{sup -3} and showed a less marked increase after processing. The observations are again consistent with an increase in the Fe level and also the different oxygen contents of the starting wafers. (Author)

  15. 32 CFR 239.9 - Application Processing Procedures.

    Science.gov (United States)

    2010-07-01

    ... = Military PCS. (iv) State: State abbreviation. (v) Installation Number: The five digit ZIP code of the... which they depart. (vi) Application Number: Sequential beginning with 0001. ER30SE09.249 (d) Real Estate Values. (1) Because the PFMV is the purchase price for Expanded HAP, no appraisal of the property...

  16. 7 CFR 1717.859 - Application process and timeframes.

    Science.gov (United States)

    2010-01-01

    ..., subtransmission, and headquarters facilities are submitted to the general field representative (GFR). The GFR will... application is satisfactory to the GFR, it will be sent promptly to the Washington office for further review... to the GFR. Procedures at this stage are the same as in paragraph (b)(1) of this section. (ii) If...

  17. Towards Process Support for Migrating Applications to Cloud Computing

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali

    2012-01-01

    Cloud computing is an active area of research for industry and academia. There are a large number of organizations providing cloud computing infrastructure and services. In order to utilize these infrastructure resources and services, existing applications need to be migrated to clouds. However, ...

  18. Applications of quantum stochastic processes in quantum optics

    OpenAIRE

    Bouten, Luc

    2008-01-01

    These lecture notes provide an introduction to quantum filtering and its applications in quantum optics. We start with a brief introduction to quantum probability, focusing on the spectral theorem. Then we introduce the conditional expectation and quantum stochastic calculus. In the last part of the notes we discuss the filtering problem.

  19. Application of high magnetic fields in advanced materials processing

    Institute of Scientific and Technical Information of China (English)

    MA Yanwei; XIAO Liye; YAN Luguang

    2006-01-01

    Recently, steady magnetic fields available from cryogen-free superconducting magnets open up new ways to process materials. In this paper,the main results obtained by using a high magnetic field to process several advanced materials are reviewed. These processed objects primarily include superconducting, magnetic, metallic and nanometer-scaled materials. It has been found that a high magnetic field can effectively align grains when fabricating the magnetic and non-magnetic materials and make inclusions migrate in a molten metal. The mechanism is discussed from the theoretical viewpoint of magnetization energy.

  20. The Application of Laser Processing on Clutch Manufacture

    Institute of Scientific and Technical Information of China (English)

    ZHU Qigen

    2006-01-01

    The first multi-function laser processing system in the domestic for clutch manufacture, with abilities of cutting, jointing and heat treatment, was reported in this paper. One external optical path, double laser heads, adjust device by manual operation, automatically track were employed in this system. Also the other parts of vehicles can be fabricated by this system, as well as clutches. The special processing to manufacture the clutches of heavy vehicles, which was developed by the project of this laser processing system, achieved the international standards and satisfied the economic development and nation defense in the domestic.

  1. Application of the Kelly Criterion to Ornstein-Uhlenbeck Processes

    Science.gov (United States)

    Lv, Yingdong; Meister, Bernhard K.

    In this paper, we study the Kelly criterion in the continuous time framework building on the work of E.O. Thorp and others. The existence of an optimal strategy is proven in a general setting and the corresponding optimal wealth process is found. A simple formula is provided for calculating the optimal portfolio for a set of price processes satisfying some simple conditions. Properties of the optimal investment strategy for assets governed by multiple Ornstein-Uhlenbeck processes are studied. The paper ends with a short discus-sion of the implications of these ideas for financial markets.

  2. Application of the gel casting process in iron powder metallurgy

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of various gel casting process parameters such as the dispersant and solid loading on the rheology of Fe slurries, molding, and sintering behaviors were studied. The relationship between solid loading and viscidity in the process of iron base powder metallurgy was researched to obtain better microstructure and properties. The results showed that the viscosity of Fe slurries is obviously reduced with the increase of the dispersant. The suitable parameters are as follows: the solid loading is 61% and sintering temperature is 1180℃. Iron parts with relatively high density and better properties were obtained by the gel casting process.

  3. Application, review, and reporting process for Waivers for State Innovation. Final rule.

    Science.gov (United States)

    2012-02-27

    This final rule sets forth a procedural framework for submission and review of initial applications for a Waiver for State Innovation described in section 1332 of the Patient Protection and the Affordable Care Act including processes to ensure opportunities for public input in the development of such applications by States and in the Federal review of the applications.

  4. 9 CFR 381.303 - Critical factors and the application of the process schedule.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Critical factors and the application of the process schedule. 381.303 Section 381.303 Animals and Animal Products FOOD SAFETY AND... Canning and Canned Products § 381.303 Critical factors and the application of the process...

  5. 40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the fish... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED SEAFOOD PROCESSING POINT SOURCE CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal...

  6. 32 CFR Appendix A to Part 284 - Overview of Waiver Application Process

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Overview of Waiver Application Process A Appendix A to Part 284 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF... ALLOWANCES Pt. 284, App. A Appendix A to Part 284—Overview of Waiver Application Process A. Standards...

  7. 78 FR 79703 - Submission for OMB Review; 30-Day Comment Request: Application Process for Clinical Research...

    Science.gov (United States)

    2013-12-31

    ...: Application Process for Clinical Research Training and Medical Education at the Clinical Center and Its Impact... in writing. Proposed Collection: Application Process for Clinical Research Training and Medical... Clinical Research Training and Medical Education, NIH Clinical Center, 10 Center Drive, MSC 1158,...

  8. 76 FR 13553 - Application, Review, and Reporting Process for Waivers for State Innovation

    Science.gov (United States)

    2011-03-14

    ... Application, Review, and Reporting Process for Waivers for State Innovation AGENCY: Centers for Medicare... for State Innovation described in section 1332 of the Patient Protection and the Affordable Care Act including processes to ensure opportunities for public input in the development of such applications...

  9. 36 CFR 72.54 - Rehabilitation and Innovation grants-full application process.

    Science.gov (United States)

    2010-07-01

    ..., Approval and Administration § 72.54 Rehabilitation and Innovation grants—full application process. Once a... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Rehabilitation and Innovation grants-full application process. 72.54 Section 72.54 Parks, Forests, and Public Property NATIONAL...

  10. 47 CFR 1.572 - Processing TV broadcast and translator station applications.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Processing TV broadcast and translator station applications. 1.572 Section 1.572 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Broadcast Applications and Proceedings General Filing Requirements § 1.572 Processing TV...

  11. 9th International Conference on Robotics, Vision, Signal Processing & Power Applications

    CERN Document Server

    Iqbal, Shahid; Teoh, Soo; Mustaffa, Mohd

    2017-01-01

     The proceeding is a collection of research papers presented, at the 9th International Conference on Robotics, Vision, Signal Processing & Power Applications (ROVISP 2016), by researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe to present their research results and development activities for oral or poster presentations. The topics of interest are as follows but are not limited to:   • Robotics, Control, Mechatronics and Automation • Vision, Image, and Signal Processing • Artificial Intelligence and Computer Applications • Electronic Design and Applications • Telecommunication Systems and Applications • Power System and Industrial Applications • Engineering Education.

  12. 8th International Conference on Robotic, Vision, Signal Processing & Power Applications

    CERN Document Server

    Mustaffa, Mohd

    2014-01-01

    The proceeding is a collection of research papers presented, at the 8th International Conference on Robotics, Vision, Signal Processing and Power Applications (ROVISP 2013), by researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe. The topics of interest are as follows but are not limited to: • Robotics, Control, Mechatronics and Automation • Vision, Image, and Signal Processing • Artificial Intelligence and Computer Applications • Electronic Design and Applications • Telecommunication Systems and Applications • Power System and Industrial Applications  

  13. Reaming process improvement and control: An application of statistical engineering

    DEFF Research Database (Denmark)

    Müller, Pavel; Genta, G.; Barbato, G.;

    2012-01-01

    A reaming operation had to be performed within given technological and economical constraints. Process improvement under realistic conditions was the goal of a statistical engineering project, supported by a comprehensive experimental investigation providing detailed information on single...

  14. Theory and applications of spherical microphone array processing

    CERN Document Server

    Jarrett, Daniel P; Naylor, Patrick A

    2017-01-01

    This book presents the signal processing algorithms that have been developed to process the signals acquired by a spherical microphone array. Spherical microphone arrays can be used to capture the sound field in three dimensions and have received significant interest from researchers and audio engineers. Algorithms for spherical array processing are different to corresponding algorithms already known in the literature of linear and planar arrays because the spherical geometry can be exploited to great beneficial effect. The authors aim to advance the field of spherical array processing by helping those new to the field to study it efficiently and from a single source, as well as by offering a way for more experienced researchers and engineers to consolidate their understanding, adding either or both of breadth and depth. The level of the presentation corresponds to graduate studies at MSc and PhD level. This book begins with a presentation of some of the essential mathematical and physical theory relevant to ...

  15. Quantale Modules, with Applications to Logic and Image Processing

    CERN Document Server

    Russo, Ciro

    2009-01-01

    In this dissertation a categorical and algebraic study of quantale modules is proposed. The results and constructions presented are also applied to abstract algebraic logic and to image processing tasks.

  16. Microstructure optimization design methods of the forging process and applications

    Institute of Scientific and Technical Information of China (English)

    WANG Guangchun; ZHAO Guoqun; GUAN Jing

    2007-01-01

    A microstructure optimization design method of the forging process is proposed. The optimization goal is the fine grain size and homogeneous grain distribution. The optimization object is the forging process parameters and the shape of the preform die. The grain size sub-objective function, the forgings shape sub-objective function and the whole objective function including the shape and the grain size are established, espectively. The detailed optimization steps are given. The microstructure optimization program is developed using the micro-genetic algorithm and the finite element method. Then, the upsetting process of the cylindrical billet is analyzed using a self-developed program. The forging parameters and the shape of preform die of the upsetting process are optimized respectively. The fine size and homogenous distribution of the grain can be achieved by controlling the shape of the preform die and improving the friction condition.

  17. Application of digital image processing techniques to astronomical imagery 1977

    Science.gov (United States)

    Lorre, J. J.; Lynn, D. J.

    1978-01-01

    Nine specific techniques of combination of techniques developed for applying digital image processing technology to existing astronomical imagery are described. Photoproducts are included to illustrate the results of each of these investigations.

  18. Application of Mellin Transform in Wideband Underwater Acoustic Signal Processing

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    According to the features of the wideband underwater acoustic signals, an algorithm for the wideband ambiguity function is put forward based on Mellin transform. The wideband acoustic signal processing using the fast Mellin transform is also explored. The theoretical analysis and simulation results show that the algorithm has not only high computation efficiency but also good concentration in wideband ambiguity domain. It suits for the wideband underwater acoustic signal processing.

  19. Process applications for geothermal energy resources. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mikic, B.B.; Meal, H.C.; Packer, M.B.; Guillamon-Duch, H.

    1981-08-01

    The principal goal of the program was to demonstrate economical and technical suitability of geothermal energy as a source of industrial process heat through a cooperative program with industrial firms. To accomplish that: a critical literature survey in the field was performed; a workshop with the paper and pulp industry representatives was organized; and four parallel methods dealing with technical and economical details of geothermal energy use as a source of industrial process heat were developed.

  20. An expert systems application to space base data processing

    Science.gov (United States)

    Babb, Stephen M.

    1988-01-01

    The advent of space vehicles with their increased data requirements are reflected in the complexity of future telemetry systems. Space based operations with its immense operating costs will shift the burden of data processing and routine analysis from the space station to the Orbital Transfer Vehicle (OTV). A research and development project is described which addresses the real time onboard data processing tasks associated with a space based vehicle, specifically focusing on an implementation of an expert system.

  1. Application of Hazard Analysis and Critical Control Points in Cherry Juice Processing Enterprises

    Directory of Open Access Journals (Sweden)

    Peilong Xu

    2015-09-01

    Full Text Available Qingdao is one of the homelands for Cherry in China and in recent years, deep processing industry of cherry is developing rapidly. In this study, Hazard Analysis and Critical Control Points (HACCP quality control system is introduced into production process of cherry juice, which has effectively controlled food safety risks in food production processes. The practices have proved that application of HACCP system reduced probability of pollution in cherry juice production process effectively. The application of risk control system in cherry juice production provides benefits for standardization of the production process and helps in food safety supervision in production processes.

  2. Characterization of shallow trench isolation CMP process and its application

    Science.gov (United States)

    Li, Helen; Zhang, ChunLei; Liu, JinBing; Liu, ZhengFang; Chen, Kuang Han; Gbondo-Tugbawa, Tamba; Ding, Hua; Li, Flora; Lee, Brian; Gower-Hall, Aaron; Chiu, Yang-Chih

    2016-03-01

    Chemical mechanical polishing (CMP) has been a critical enabling technology in shallow trench isolation (STI), which is used in current integrated circuit fabrication process to accomplish device isolation. Excessive dishing and erosion in STI CMP processes, however, create device yield concerns. This paper proposes characterization and modeling techniques to address a variety of concerns in STI CMP. In the past, majority of CMP publications have been addressed on interconnect layers in backend- of-line (BEOL) process. However, the number of CMP steps in front-end-of-line (FEOL) has been increasing in more advanced process techniques like 3D-FinFET and replacement metal gate, as a results incoming topography induced by FEOL CMP steps can no longer be ignored as the topography accumulates and stacks up across multiple CMP steps and eventually propagating to BEOL layers. In this paper, we first discuss how to characterize and model STI CMP process. Once STI CMP model is developed, it can be used for screening design and detect possible manufacturing weak spots. We also work with process engineering team to establish hotspot criteria in terms of oxide dishing and nitride loss. As process technologies move from planar transistor to 3D transistor like FinFet and multi-gate, it is important to accurately predict topography in FEOL CMP processes. These incoming topographies when stacked up can have huge impact in BEOL copper processes, where copper pooling becomes catastrophic yield loss. A calibration methodology to characterize STI CMP step is developed as shown in Figure 1; moreover, this STI CMP model is validated from silicon data collected from product chips not used in calibration stage. Additionally, wafer experimental setup and metrology plan are instrumental to an accurate model with high predictive power. After a model is generated, spec limits and threshold to establish hotspots criteria can be defined. Such definition requires working closely with foundry

  3. Applicability of product-driven process synthesis to separation processes in food

    NARCIS (Netherlands)

    Jankowiak, L.; Goot, van der A.J.; Trifunovic, O.; Bongers, P.; Boom, R.M.

    2012-01-01

    The demand for more sustainable processing in the food industry is rising but requires structured methodologies to support the fast implementation of new economic and sustainable processes. Product-driven process synthesis (PDPS) is a recently established methodology facilitating the rapid developme

  4. Holistic simulation of geotechnical installation processes theoretical results and applications

    CERN Document Server

    2017-01-01

    This book provides recent developments and improvements in the modeling as well as application examples and is a complementary work to the previous Lecture Notes Vols. 77 and 80. It summarizes the fundamental work from scientists dealing with the development of constitutive models for soils, especially cyclic loading with special attention to the numerical implementation. In this volume the neo-hypoplasticity and the ISA (intergranular strain anisotropy) model in their extended version are presented. Furthermore, new contact elements with non-linear constitutive material laws and examples for their applications are given. Comparisons between the experimental and the numerical results show the effectiveness and the drawbacks and provide a useful and comprehensive pool for all the constitutive model developers and scientists in geotechnical engineering, who like to prove the soundness of new approaches.

  5. Applications of polymer extrusion technology to coal processing

    Science.gov (United States)

    Lewis, D. W.

    1981-01-01

    Upon heating, many of the middle-aged bituminous coals exhibit a plasticity very similar to polyethylene for a few minutes. Plastic coal can be extruded, pelletized or molded using common plastics technology and equipment. Investigations concerning the plastic state of coals are conducted with the objective to develop techniques which will make useful commercial applications of this property possible. Experiments which show the characteristics of plastic-state coal are discussed, and problems related to a continuous extrusion of coal are considered. Probably the most significant difference between the continuous extrusion of coal and the extrusion of a thermoplastic polymer is that volatiles are continuously being released from the coal. Attention is given to aspects of dragflow, solids feeding, and melt pumping. Application potentials for plastic coal extrusion might be related to coal gasification, direct liquefaction, and coal combustion.

  6. Supercritical Fluid Spray Application Process for Adhesives and Primers

    Science.gov (United States)

    2003-03-01

    and adhesives (1-3), synthesis of polymers with microcellular structures (4), and drying of silica aerogel (5-11) already have been developed into...poor solvent and a good solute. In applications such as spraying paint, coatings, and adhesives, aerogel -making, and impregnations, carbon dioxide...microns. Tepper and Levit (64) also demonstrated the deposition of microspheres of high molecular weight poly(dimethylsiloxane) onto the sensing surface

  7. Simulation and Data Processing for Ultrasonic Phased-Arrays Applications

    Science.gov (United States)

    Chaffaï-Gargouri, S.; Chatillon, S.; Mahaut, S.; Le Ber, L.

    2007-03-01

    The use of phased-arrays techniques has considerably contributed to extend the domain of applications and the performances of ultrasonic methods on complex configurations. Their adaptability offers a great freedom for conceiving the inspection leading to a wide range of functionalities gathering electronic commutation, applications of different delay laws and so on. This advantage allows to circumvent the difficulties encountered with more classical techniques especially when the inspection is assisted by simulation at the different stages : probe design (optimization of the number and characteristics of the elements), evaluation of the performances in terms of flaw detection (zone coverage) and characterization, driving the array (computation of adapted delay laws) and finally analyzing the results (versatile model-based imaging tools allowing in particular to locate the data in the real space). The CEA is strongly involved in the development of efficient simulation-based tools adapted to these needs. In this communication we present the recent advances done at CEA in this field and show several examples of complex NDT phased arrays applications. On these cases we show the interest and the performances of simulation-helped array design, array-driving and data analysis.

  8. Whole-animal imaging of bacterial infection using endoscopic excitation of β-lactamase (BlaC)-specific fluorogenic probe

    Science.gov (United States)

    Nooshabadi, Fatemeh; Yang, Hee-Jeong; Cheng, Yunfeng; Xie, Hexin; Rao, Jianghong; Cirillo, Jeffrey D.; Maitland, Kristen C.

    2016-03-01

    Tuberculosis (TB), caused by Mycobacterium tuberculosis (Mtb), remains one of the most frequent causes of death worldwide. The slow growth rate of Mtb limits progress toward understanding tuberculosis including diagnosis of infections and evaluating therapeutic efficacy. Development of near-infrared (NIR) β-lactamase (BlaC)-specific fluorogenic substrate has made a significant breakthrough in the whole-animal imaging to detect Mtb infection. The reporter enzyme fluorescence (REF) system using a BlaC-specific fluorogenic substrate has improved the detection sensitivity in whole-animal optical imaging down to ~104 colony forming units (CFU) of bacteria, about 100-fold improvement over recombinant strains. However, improvement of detection sensitivity is strongly needed for clinical diagnosis of early stage infection at greater tissue depth. In order to improve detection sensitivity, we have integrated a fiber-based microendoscpe into a whole-animal imaging system to transmit the excitation light from the fiber bundle to the fluorescent target directly and measure fluorescent level using BlaC-specific REF substrate in the mouse lung. REF substrate, CNIR800, was delivered via aerosol route to the pulmonary infected mice with M. bovis BCG strain at 24 hours post-infection and groups of mice were imaged at 1-4 hours post-administration of the substrate using the integrated imaging system. In this study we evaluated the kinetics of CNIR800 substrate using REF technology using the integrated imaging system. Integration of these technologies has great promise for improved detection sensitivity allowing pre-clinical imaging for evaluation of new therapeutic agents.

  9. Emerging Carbapenem-Resistant Pseudomonas aeruginosa Isolates Carrying blaIMP Among Burn Patients in Isfahan, Iran

    Science.gov (United States)

    Radan, Mohsen; Moniri, Rezvan; Khorshidi, Ahmad; Gilasi, Hamidreza; Norouzi, Zohreh; Beigi, Fahimeh; Dasteh Goli, Yasaman

    2016-01-01

    Background Metallo-β-lactamase (MBL)-producing Pseudomonas aeruginosa is a significant pathogen in burn patients. Objectives The aim of this study was to determine the prevalence of carbapenem-resistant P. aeruginosa isolates, including those resistant to imipenemase (IMP), in a burn unit in Isfahan, Iran. Patients and Methods One hundred and fifty P. aeruginosa isolates from burn patients were tested for antibiotic susceptibility by the disc diffusion method in accordance with CLSI guidelines. Production of MBL was identified with the EDTA disk method. DNA was purified from the MBL-positive isolates, and detection of the blaIMP gene was performed with PCR. Results Fifty-seven out of 150 (38%) isolates were multi-drug resistant (MDR), and 93 (62%) were extensively-drug resistant (XDR). Among all isolates, the resistance rate to ciprofloxacin, tobramycin, imipenem, meropenem, amikacin, ceftazidime, and cefepime was higher than 90%, while the resistance rates to piperacillin/tazobactam and aztreonam were 70.7% and 86%, respectively. Colistin and polymyxin B remained the most effective studied antibiotics. All of the imipenem-resistant P. aeruginosa isolates were MBL-positive, and 107 out of 144 (74.3%) of the MBL isolates were positive for the blaIMP gene. Conclusions The results of this study show that the rate of P. aeruginosa-caused burn wound infections was very high, and many of the isolates were resistant to three or more classes of antimicrobials. Such extensive resistance to antimicrobial classes is important because few treatment options remain for patients with burn wound infections. blaIMP-producing P. aeruginosa isolates are a rising threat in burn-care units, and should be controlled by conducting infection-control assessments.

  10. Promoter Deletions of Klebsiella pneumoniae Carbapenemase (KPC)-Encoding Genes (blaKPC-2) and Efflux Pump (AcrAB) on β-Lactam Susceptibility in KPC-Producing Enterobacteriaceae

    OpenAIRE

    Seecoomar, Gomattie D.; Marmol, Brenda C.; Kwon, Dong H.

    2013-01-01

    Klebsiella pneumoniae carbapenemase (KPC)-encoding genes containing promoter-deletions (blaKPC-2a, blaKPC-2b, and blaKPC-2c) have disseminated in Enterobacteriaceae. The minimal inhibitory concentrations (MICs) to β-lactams in clinical KPC-producing Enterobacteriaceae are ranging from susceptible to high-level resistant resulting in diagnostic problems. In order to better understand the variability in β-lactam MICs among KPC-producing Enterobacteriaceae, three isoforms of blaKPC-2 gene were u...

  11. Sol-gel materials for optofluidics - process and applications

    DEFF Research Database (Denmark)

    Mikkelsen, Morten Bo Lindholm

    2011-01-01

    of the material. At early stages of gelation, thin gel coatings can be structured by nanoimprint lithography, and purely inorganic silica materials can be obtained by subsequent thermal annealing. The sol-gel process thus constitutes a unique method for nanofabrication of silica materials of special properties....... In this work, sol-gel silica is introduced as a new material class for the fabrication of lab-on-a-chip devices for DNA analysis. An imprint process with a rigid, non-permeable stamp was developed, which enabled fabrication of micro- and nanofluidic silica channels in a single process step without use of any......, continuous tumbling across the grooves called the ’tumbleweed’. Dynamical transitions between the two states cause DNA molecules to exhibit both size- and topology-dependent velocities that may be utilized for separation. By templating the porosity of sol-gel silica with sub-wavelength latex particles...

  12. Spectroscopy for Industrial Applications: High-Temperature Processes

    DEFF Research Database (Denmark)

    Fateev, Alexander; Grosch, Helge; Clausen, Sønnik

    The continuous development of the spectroscopic databases brings new perspectives in the environmental and industrial on-line process control, monitoring and stimulates further optical sensor developments. This is because no calibration gases are needed and, in general, temperature-dependent spec......The continuous development of the spectroscopic databases brings new perspectives in the environmental and industrial on-line process control, monitoring and stimulates further optical sensor developments. This is because no calibration gases are needed and, in general, temperature......-dependent spectral absorption features gases of interest fora specic instrument can in principle be calculated by knowing only the gas temperature and pressure in the process under investigation/monitoring. The latest HITRAN-2012 database contains IR/UV spectral data for 47 molecules and it is still growing. However....... Overall the presentation shows an example of successful industrial and academic partnerships within the framework of national and international ongoing projects....

  13. Research and Applications of Semi-solid Processing

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It has been more than ten years since the semi-solid processing (SSP) technique was put into commercial ap plications in the world. A lot of work on semi-solid metals (SSM) including their preparation, reheating and semi-solid forming has been done in China. In order to produce the high quality die-casting, a novel innovation that modifies the present machines based on the SSP technique was proposed. Semi-solid die-casting on modified casting machines can manufacture parts with more excellent quality than those produced by squeeze casting. It was found that the defects such as "elephant foot" and "periphery liquid metal loss" during reheating could be avoided through controlling the non-de ndritic structure of billets and optimizing the reheating process. The processing parameters and mold designs of semi-so lid die-casting are fairly different from those of liquid die-casting.

  14. The effect of BLA GABAB receptors in anxiolytic-like effect and aversive memory deficit induced by ACPA

    Directory of Open Access Journals (Sweden)

    Katayoon Kangarlu Haghighi

    2016-07-01

    Full Text Available Background: As a psychoactive plant, Cannabis sativa (Marijuana is widely used throughout the world. Several investigations have indicated that administration of Marijuana affects various cognitive and non-cognitive behaviors. These include anxiety-like behaviors and learning and memory deficit. It has been shown that three main cannabinoid receptors [i.e. CB1, CB2 and CB3 are involved in cannabinoids’ functions. CB1 receptors are abundantly expressed in the central nervous system regions such as hippocampus, amygdala, cerebellum and the cortex. Therefore, the neuropsychological functions of endocannabinoids are thought to be more linked to CB1 receptors. Among other brain regions, CB1 is highly expressed in the amygdala which is an integral component of the limbic circuitry. The amygdala plays a major role in the control of emotional behavior, including conditioned fear and anxiety. In present study we examined the possible roles of basolateral amygdala (BLA GABAB receptors in arachydonilcyclopropylamide (ACPA-induced anxiolytic-like effect and aversive memory deficit in adult male mice. Methods: This experimental study was conducted from September 2013 to December 2014 in Institute for Studies in Theoretical Physics and Mathematics, School of Cognitive Sciences, Tehran and Male albino NMRI mice (Pasture Institute, Iran, weighting 27-30 g, were used. Bilateral guide-cannulae were implanted to allow intra BLA microinjection of the drugs. We used Elevated Plus Maze (EPM to examine memory and anxiety behavior (test-retest protocol. ACPA administrate intra-peritoneal and GABAB agonist and antagonist administrated intra-amygdala. Results: Data showed that pre-test treatment with ACPA induced anxiolytic-like and aversive memory deficit The results revealed that pre-test intra-BLA infusion of baclofen (GABAB receptor agonist impaired the aversive memory while phaclofen (GABAB receptor antagonist improved it. Interestingly, pretreatment with a sub

  15. Bates solar industrial process-steam application: preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-07

    The design is analyzed for a parabolic trough solar process heat system for a cardboard corrugation fabrication facility in Texas. The program is briefly reviewed, including an analysis of the plant and process. The performance modeling for the system is discussed, and the solar system structural design, collector subsystem, heat transport and distribution subsystem are analyzed. The selection of the heat transfer fluid, and ullage and fluid maintenance are discussed, and the master control system and data acquisition system are described. Testing of environmental degradation of materials is briefly discussed. A brief preliminary cost analysis is included. (LEW)

  16. Application of wavelet analysis to crustal deformation data processing

    Institute of Scientific and Technical Information of China (English)

    张燕; 吴云; 刘永启; 施顺英

    2004-01-01

    The time-frequency analysis and anomaly detection of wavelet transformation make the method irresistibly advantageous in non-stable signal processing. In the paper, the two characteristics are analyzed and demonstrated withsynthetic signal. By applying wavelet transformation to deformation data processing, we find that about 4 monthsbefore strong earthquakes, several deformation stations near the epicenter received at the same time the abnormalsignal with the same frequency and the period from several days to more than ten days. The GPS observation stations near the epicenter all received the abnormal signal whose period is from 3 months to half a year. These abnormal signals are possibly earthquake precursors.

  17. Signal processing in magnetic resonance spectroscopy with biomedical applications

    CERN Document Server

    Belkic, Dzevad

    2010-01-01

    ""a useful addition to the fields of both magnetic resonance (MR) as well as signal processing. … immensely useful as a practical resource handbook to dip into from time to time and to find specific advice on issues faced during the course of work in MR techniques for cancer research. … the best feature of this book is how it positions the very practical area of digital signal processing in the contextual framework of a much more esoteric and fundamental field-that of quantum mechanics. The direct link between quantum-mechanical spectral analysis and rational response functions and the gene

  18. Self-piercing riveting properties, processes and applications

    CERN Document Server

    Chrysanthou, A

    2014-01-01

    Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing.Part one provides an exte

  19. Applications of Weighted Automata in Natural Language Processing

    Science.gov (United States)

    Knight, Kevin; May, Jonathan

    We explain why weighted automata are an attractive knowledge representation for natural language problems. We first trace the close historical ties between the two fields, then present two complex real-world problems, transliteration and translation. These problems are usefully decomposed into a pipeline of weighted transducers, and weights can be set to maximize the likelihood of a training corpus using standard algorithms. We additionally describe the representation of language models, critical data sources in natural language processing, as weighted automata. We outline the wide range of work in natural language processing that makes use of weighted string and tree automata and describe current work and challenges.

  20. Advances in fntd technology: Instrumentation, image processing and applications

    Science.gov (United States)

    Bartz, James Andrew

    Fluorescent Nuclear Track Detectors (FNTDs), based on Al2O 3:C,Mg single crystal material, enable diffraction limited imaging of ionization patterns. This fast, luminescent material is thermally and optically stable. This work expands and assesses the capability of FNTD technology to measure radiation dose quickly and accurately, especially neutron radition. Developments in FNTD instrumentation, software, image reconstruction, image processing and data processing improved ease of use, productivity and reliability and brought the technology into commercial viability. Descriptions of these developments are presented. Additionally, these developments were assessed and were found to comply with ANSI and ISO standards for personnel neutron dosimetry. (Abstract shortened by ProQuest.).

  1. APPLICATION OF FUZZY ANALYTIC HIERARCHY PROCESS TO BUILDING RESEARCH TEAMS

    Directory of Open Access Journals (Sweden)

    Karol DĄBROWSKI

    2016-01-01

    Full Text Available Building teams has a fundamental impact for execution of research and development projects. The teams appointed for the needs of given projects are based on individuals from both inside and outside of the organization. Knowledge is not only a product available on the market but also an intangible resource affecting their internal and external processes. Thus it is vitally important for businesses and scientific research facilities to effectively manage knowledge within project teams. The article presents a proposal to use Fuzzy AHP (Analytic Hierarchy Process and ANFIS (Adaptive Neuro Fuzzy Inference System methods in working groups building for R&D projects on the basis of employees skills.

  2. Structures of Two Major Allergens, Bla g 4 and Per a 4, From Cockroaches and Their IgE Binding Epitopes

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Y.; Chan, S; Ong, T; Yit, L; Tiong, Y; Chew, F; Sivaraman, J; Mok, Y

    2009-01-01

    Inhalant allergens from cockroaches are an important cause of asthma to millions of individuals worldwide. Here we report for the first time the structures of two major cockroach allergens, Bla g 4 and Per a 4, that adopt a typical lipocalin fold but with distinct structural features as compared with other known lipocalin allergens. Both Bla g 4 and Per a 4 contain two long-range disulfide bonds linking the N and C termini to a beta-barrel. The C-terminal helix of Bla g 4 is bent and greatly extended toward the N terminus. Bla g 4 is found to be a monomer, whereas Per a 4 exists as a dimer in solution with a novel dimeric interface involving residues from loops at the top and bottom of the beta-barrel. Putative ligand binding sites of both allergens are determined by docking of the juvenile hormone III inside the beta-barrel and found to interact with the ligand using non-conserved residues. Bla g 4 and Per a 4 are found to be cross-reactive in sera IgE binding, at least in the Singaporean Chinese population tested. A major IgE binding epitope unique to Per a 4 is found on the loops at the bottom of the beta-barrel that may aid the development of hypoallergens for immunotherapy.

  3. Applications of image processing and visualization in the evaluation of murder and assault

    Science.gov (United States)

    Oliver, William R.; Rosenman, Julian G.; Boxwala, Aziz; Stotts, David; Smith, John; Soltys, Mitchell; Symon, James; Cullip, Tim; Wagner, Glenn

    1994-09-01

    Recent advances in image processing and visualization are of increasing use in the investigation of violent crime. The Digital Image Processing Laboratory at the Armed Forces Institute of Pathology in collaboration with groups at the University of North Carolina at Chapel Hill are actively exploring visualization applications including image processing of trauma images, 3D visualization, forensic database management and telemedicine. Examples of recent applications are presented. Future directions of effort include interactive consultation and image manipulation tools for forensic data exploration.

  4. Microwave Field Applicator Design in Small-Scale Chemical Processing

    NARCIS (Netherlands)

    Sturm, G.S.J.

    2013-01-01

    Ever since the first experiments nearly three decades ago, microwave enhanced chemistry has received incessant scientific attention. Many studies report improved process performance in terms of speed and conversion under microwave exposure and therefore it is recognized as a promising alternative me

  5. Runs in superpositions of renewal processes with applications to discrimination

    Science.gov (United States)

    Alsmeyer, Gerold; Irle, Albrecht

    2006-02-01

    Wald and Wolfowitz [Ann. Math. Statist. 11 (1940) 147-162] introduced the run test for testing whether two samples of i.i.d. random variables follow the same distribution. Here a run means a consecutive subsequence of maximal length from only one of the two samples. In this paper we contribute to the problem of runs and resulting test procedures for the superposition of independent renewal processes which may be interpreted as arrival processes of customers from two different input channels at the same service station. To be more precise, let (Sn)n[greater-or-equal, slanted]1 and (Tn)n[greater-or-equal, slanted]1 be the arrival processes for channel 1 and channel 2, respectively, and (Wn)n[greater-or-equal, slanted]1 their be superposition with counting process . Let further be the number of runs in W1,...,Wn and the number of runs observed up to time t. We study the asymptotic behavior of and Rt, first for the case where (Sn)n[greater-or-equal, slanted]1 and (Tn)n[greater-or-equal, slanted]1 have exponentially distributed increments with parameters [lambda]1 and [lambda]2, and then for the more difficult situation when these increments have an absolutely continuous distribution. These results are used to design asymptotic level [alpha] tests for testing [lambda]1=[lambda]2 against [lambda]1[not equal to][lambda]2 in the first case, and for testing for equal scale parameters in the second.

  6. CMOS prototype for retinal prosthesis applications with analog processing

    Science.gov (United States)

    Castillo-Cabrera, G.; García-Lamont, J.; Reyes-Barranca, M. A.; Matsumoto-Kuwabara, Y.; Moreno-Cadenas, J. A.; Flores-Nava, L. M.

    2014-12-01

    A core architecture for analog processing, which emulates a retina's receptive field, is presented in this work. A model was partially implemented and built on CMOS standard technology through MOSIS. It considers that the receptive field is the basic unit for image processing in the visual system. That is why the design is concerned on a partial solution of receptive field properties in order to be adapted in the future as an aid to people with retinal diseases. A receptive field is represented by an array of 3×3 pixels. Each pixel carries out a process based on four main operations. This means that image processing is developed at pixel level. Operations involved are: (1) photo-transduction by photocurrent integration, (2) signal averaging from eight neighbouring pixels executed by a neu-NMOS (ν-NMOS) neuron, (3) signal average gradient between central pixel and the average value from the eight neighbouring pixels (this gradient is performed by a comparator) and finally (4) a pulse generator. Each one of these operations gives place to circuital blocks which were built on 0.5 μm CMOS technology.

  7. Applications of edible films and coatings to processed foods

    Science.gov (United States)

    Edible coatings have been successfully applied in processed foods such as meat, cereals, confectionaries, dried fruits, nuts and fresh and fresh-cut fruits and vegetables. These coatings are used to improve the quality and shelf-life of foods. Furthermore, different food ingredients, derived from ...

  8. Nonlinear Optical Signal Processing for Tbit/s Ethernet Applications

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo; Galili, Michael; Mulvad, Hans Christian Hansen;

    2012-01-01

    We review recent experimental demonstrations of Tbaud optical signal processing. In particular, we describe a successful 1.28 Tbit/s serial data generation based on single polarization 1.28 Tbaud symbol rate pulses with binary data modulation (OOK) and subsequent all-optical demultiplexing. We also...

  9. Application of transfer functions to canned tuna fish thermal processing.

    Science.gov (United States)

    Ansorena, M R; del Valle, C; Salvadori, V O

    2010-02-01

    Design and optimization of thermal processing of foods need accurate dynamic models to ensure safe and high quality food products. Transfer functions had been demonstrated to be a useful tool to predict thermal histories, especially under variable operating conditions. This work presents the development and experimental validation of a dynamic model (discrete transfer function) for the thermal processing of tuna fish in steam retorts. Transfer function coefficients were obtained numerically, using commercial software of finite elements (COMSOL Multiphysics) to solve the heat transfer balance. Dependence of transfer function coefficients on the characteristic dimensions of cylindrical containers (diameter and height) and on the sampling interval is reported. A simple equation, with two empirical parameters that depends on the container dimensions, represented the behavior of transfer function coefficients with very high accuracy. Experimental runs with different size containers and different external conditions (constant and variable retort temperature) were carried out to validate the developed methodology. Performance of the thermal process simulation was tested for predicting internal product temperature of the cold point and lethality and very satisfactory results were found. The developed methodology can play an important role in reducing the computational effort while guaranteeing accuracy by simplifying the calculus involved in the solution of heat balances with variable external conditions and emerges as a potential approach to the implementation of new food control strategies leading not only to more efficient processes but also to product quality and safety.

  10. Markov Skeleton Processes and Applications to Queueing Systems

    Institute of Scientific and Technical Information of China (English)

    Zhen-ting Hou

    2002-01-01

    In this paper, we apply the backward equations of Markov skeleton processes to queueing systems.The transient distribution of the waiting time of a GI/G/1 queueing system, the transient distribution of the length of a GI/G/N queueing system and the transient distribution of the length of queueing networks are obtained.

  11. Processing Academic Language through Four Corners Vocabulary Chart Applications

    Science.gov (United States)

    Smith, Sarah; Sanchez, Claudia; Betty, Sharon; Davis, Shiloh

    2016-01-01

    4 Corners Vocabulary Charts (FCVCs) are explored as a multipurpose vehicle for processing academic language in a 5th-grade classroom. FCVCs typically display a vocabulary word, an illustration of the word, synonyms associated with the word, a sentence using a given vocabulary word, and a definition of the term in students' words. The use of…

  12. General Template for the FMEA Applications in Primary Food Processing.

    Science.gov (United States)

    Özilgen, Sibel; Özilgen, Mustafa

    2016-11-22

    Data on the hazards involved in the primary steps of processing cereals, fruit and vegetables, milk and milk products, meat and meat products, and fats and oils are compiled with a wide-ranging literature survey. After determining the common factors from these data, a general FMEA template is offered, and its use is explained with a case study on pasteurized milk production.

  13. The Matrix Pencil and its Applications to Speech Processing

    Science.gov (United States)

    2007-03-01

    corporation; or convey any rights or permission to manufacture , use, or sell any patented invention that may relate to them. This report was cleared...short time window. An example would be 48 violin vibratos or a guitar attack [19]. In this dissertation, the emphasis is on speech processing

  14. The Development and Application of an Integrated VAR Process Model

    Science.gov (United States)

    Ballantyne, A. Stewart

    2016-07-01

    The VAR ingot has been the focus of several modelling efforts over the years with the result that the thermal regime in the ingot can be simulated quite realistically. Such models provide important insight into solidification of the ingot but present some significant challenges to the casual user such as a process engineer. To provide the process engineer with a tool to assist in the development of a melt practice, a comprehensive model of the complete VAR process has been developed. A radiation heat transfer simulation of the arc has been combined with electrode and ingot models to develop a platform which accepts typical operating variables (voltage, current, and gap) together with process parameters (electrode size, crucible size, orientation, water flow, etc.) as input data. The output consists of heat flow distributions and solidification parameters in the form of text, comma-separated value, and visual toolkit files. The resulting model has been used to examine the relationship between the assumed energy distribution in the arc and the actual energy flux which arrives at the ingot top surface. Utilizing heat balance information generated by the model, the effects of electrode-crucible orientation and arc gap have been explored with regard to the formation of ingot segregation defects.

  15. Application of a medical image processing system in liver transplantation

    Institute of Scientific and Technical Information of China (English)

    Chi-Hua Fang; Xiao-Feng Li; Zhou Li; Ying-Fang Fan; Chao-Min Lu; Yan-Peng Huang; Feng-Ping Peng

    2010-01-01

    BACKGROUND: At present, imaging is used not only to show the form of images, but also to make three-dimensional (3D) reconstructions and visual simulations based on original data to guide clinical surgery. This study aimed to assess the use of a medical image-processing system in liver transplantation surgery. METHODS: The data of abdominal 64-slice spiral CT scan were collected from 200 healthy volunteers and 37 liver cancer patients in terms of hepatic arterial phase, portal phase, and hepatic venous phase. A 3D model of abdominal blood vessels including the abdominal aorta system, portal vein system, and inferior vena cava system was reconstructed by an abdominal image processing system to identify vascular variations. Then, a 3D model of the liver was reconstructed in terms of hepatic segmentation and liver volume was calculated. The FreeForm modeling system with a PHANTOM force feedback device was used to simulate the real liver transplantation environment, in which the total process of liver transplantation was completed. RESULTS: The reconstructed model of the abdominal blood vessels and the liver was clearly demonstrated to be three-dimensionally consistent with the anatomy of the liver, in which the variations of abdominal blood vessels were identiifed and liver segmentation was performed digitally. In the model, liver transplantation was simulated subsequently, and different modus operandi were selected successfully. CONCLUSION: The digitized medical image processing system may be valuable for liver transplantation.

  16. Digital Image Processing application to spray and flammability studies

    Science.gov (United States)

    Hernan, M. A.; Parikh, P.; Sarohia, V.

    1985-01-01

    Digital Image Processing has been integrated into a new technique for measurements of fuel spray characteristics. The advantages of this technique are: a wide dynamic range of droplet sizes, accounting for nonspherical droplet shapes not possible with other spray assessment techniques. Finally, the technique has been applied to the study of turbojet engine fuel nozzle atomization performance with Jet A and antimisting fuel.

  17. The Application of Partial Differential Equations in Medical Image Processing

    Directory of Open Access Journals (Sweden)

    Mohammad Madadpour Inallou

    2013-10-01

    Full Text Available Mathematical models are the foundation of biomedical computing. Partial Differential Equations (PDEs in Medical Imaging is concerned with acquiring images of the body for research, diagnosis and treatment. Biomedical Image Processing and its influence has undergoing a revolution in the past decade. Image processing has become an important component in contemporary science and technology and has been an interdisciplinary research field attracting expertise from applied mathematics, biology, computer sciences, engineering, statistics, microscopy, radiologic sciences, physics, medicine and etc. Medical imaging equipment is taking on an increasingly critical role in healthcare as the industry strives to lower patient costs and achieve earlier disease prediction using noninvasive means. The subsections of medical imaging are categorized to two: Conventional (X-Ray and Ultrasound and Computed (CT, MRI, fMRI, SPECT, PET and etc. This paper is organized as fallow: First section describes some kind of image processing. Second section is about techniques and requirements, and in the next sections the proceeding of Analyzing, Smoothing, Segmentation, De-noising and Registration in Medical Image Processing Equipment by PDEs Framework will be regarded

  18. Processing dependent properties of silica xerogels for interlayer dielectric applications

    Science.gov (United States)

    Jain, Anurag

    One of the current and near future research focus in microelectronics is to integrate copper with a new low dielectric constant (K) material. The traditional low K is dense SiO2 (K = 4). Introducing porosity in materials with silica backbone is promising as processing and integration methods are well known. This thesis focuses on studying silica xerogel, also known as nanoporous silica. A new low-K material has to be tested for an array of electrical, mechanical, thermal, and chemical properties before it is deemed successful to replace dense SiO2. These properties of silica xerogels are characterized using various analytical techniques and the effect of processing conditions is studied. The property data is explained by the models and mechanisms relating processing-structure-property behavior. The processing effects on thermal and mechanical properties are studied in great detail and the theories for generic porous low-K materials are developed. The xerogel films are processed at ambient conditions and crack free, thick (0.5--4 mum), highly porous (˜25--90%) films are obtained. Two methods of porosity control were used. One is the traditional single solvent (ethanol) method and another is a binary solvent (mixture of ethanol and ethylene glycol) method. The films underwent aging and silylation procedures to make the backbone stiff and hydrophobic. Sintering of xerogel films eliminates defects and organics and additional condensation reactions make matrix more connected, dense and ordered. Films were characterized for their refractive index, thickness, porosity, pore size and surface roughness. Dielectric constant measurements at 1 MHz show that K varies linearly with porosity. Dielectric loss tangents are low and breakdown strength meets the standards. FTIR and XPS analysis show that films are stable chemically and remain hydrophobic even after boiling in water. Mechanical and thermal properties of porous materials are dependent on the microstructure and various

  19. Pulsed electrical discharges for medicine and biology techniques, processes, applications

    CERN Document Server

    Kolikov, Victor

    2015-01-01

    This book presents the application of pulsed electrical discharges in water and water dispersions of metal nanoparticles in medicine (surgery, dentistry, and oncology), biology, and ecology. The intensive electrical and shock waves represent a novel technique to destroy viruses and this way to  prepare anti-virus vaccines. The method of pulsed electrical discharges in water allows to decontaminate water from almost all known bacteria and spores of fungi being present in human beings. The nanoparticles used are not genotoxic and mutagenic. This book is useful for researchers and graduate students.

  20. Plasma Surface Treatment of Powder Materials — Process and Application

    Directory of Open Access Journals (Sweden)

    Monika Pavlatová

    2012-01-01

    Full Text Available Polyolefin particles are hydrophobic, and this prevents their use for various applications. Plasma treatment is an environment-friendly polyolefin hydrophilisation method. We developed an industrial-scale plant for plasma treatment of particles as small as micrometers in diameter. Materials such as PE waxes, UHMWPE and powders for rotomolding production were tested to verify their new surface properties. We achieved significantly increased wettability of the particles, so that they are very easily dispersive in water without agglomeration, and their higher surface energy is retained even after sintering in the case of rotomolding powders.

  1. Application of Strategic Planning Process with Fleet Level Analysis Methods

    Science.gov (United States)

    Mavris, Dimitri N.; Pfaender, Holger; Jimenez, Hernando; Garcia, Elena; Feron, Eric; Bernardo, Jose

    2016-01-01

    The goal of this work is to quantify and characterize the potential system-wide reduction of fuel consumption and corresponding CO2 emissions, resulting from the introduction of N+2 aircraft technologies and concepts into the fleet. Although NASA goals for this timeframe are referenced against a large twin aisle aircraft we consider their application across all vehicle classes of the commercial aircraft fleet, from regional jets to very large aircraft. In this work the authors describe and discuss the formulation and implementation of the fleet assessment by addressing the main analytical components: forecasting, operations allocation, fleet retirement, fleet replacement, and environmental performance modeling.

  2. An integrated approach to improving the parallel applications development process

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, Craig E [Los Alamos National Laboratory; Watson, Gregory R [IBM; Tibbitts, Beth R [IBM

    2009-01-01

    The development of parallel applications is becoming increasingly important to a broad range of industries. Traditionally, parallel programming was a niche area that was primarily exploited by scientists trying to model extremely complicated physical phenomenon. It is becoming increasingly clear, however, that continued hardware performance improvements through clock scaling and feature-size reduction are simply not going to be achievable for much longer. The hardware vendor's approach to addressing this issue is to employ parallelism through multi-processor and multi-core technologies. While there is little doubt that this approach produces scaling improvements, there are still many significant hurdles to be overcome before parallelism can be employed as a general replacement to more traditional programming techniques. The Parallel Tools Platform (PTP) Project was created in 2005 in an attempt to provide developers with new tools aimed at addressing some of the parallel development issues. Since then, the introduction of a new generation of peta-scale and multi-core systems has highlighted the need for such a platform. In this paper, we describe some of the challenges facing parallel application developers, present the current state of PTP, and provide a simple case study that demonstrates how PTP can be used to locate a potential deadlock situation in an MPI code.

  3. Collaborative volume visualization with applications to underwater acoustic signal processing

    Science.gov (United States)

    Jarvis, Susan; Shane, Richard T.

    2000-08-01

    Distributed collaborative visualization systems represent a technology whose time has come. Researchers at the Fraunhofer Center for Research in Computer Graphics have been working in the areas of collaborative environments and high-end visualization systems for several years. The medical application. TeleInVivo, is an example of a system which marries visualization and collaboration. With TeleInvivo, users can exchange and collaboratively interact with volumetric data sets in geographically distributed locations. Since examination of many physical phenomena produce data that are naturally volumetric, the visualization frameworks used by TeleInVivo have been extended for non-medical applications. The system can now be made compatible with almost any dataset that can be expressed in terms of magnitudes within a 3D grid. Coupled with advances in telecommunications, telecollaborative visualization is now possible virtually anywhere. Expert data quality assurance and analysis can occur remotely and interactively without having to send all the experts into the field. Building upon this point-to-point concept of collaborative visualization, one can envision a larger pooling of resources to form a large overview of a region of interest from contributions of numerous distributed members.

  4. Advanced applications of natural language processing for performing information extraction

    CERN Document Server

    Rodrigues, Mário

    2015-01-01

    This book explains how can be created information extraction (IE) applications that are able to tap the vast amount of relevant information available in natural language sources: Internet pages, official documents such as laws and regulations, books and newspapers, and social web. Readers are introduced to the problem of IE and its current challenges and limitations, supported with examples. The book discusses the need to fill the gap between documents, data, and people, and provides a broad overview of the technology supporting IE. The authors present a generic architecture for developing systems that are able to learn how to extract relevant information from natural language documents, and illustrate how to implement working systems using state-of-the-art and freely available software tools. The book also discusses concrete applications illustrating IE uses.   ·         Provides an overview of state-of-the-art technology in information extraction (IE), discussing achievements and limitations for t...

  5. Lean Six Sigma Application in Rear Combination Automotive Lighting Process

    Science.gov (United States)

    Sodkomkham, Thanwarhat; Chutima, Parames

    2016-05-01

    The case study company produces various front and rear lightings for automobiles and motorcycles. Currently, it faces two problems, i.e. high defective rate and high inventory. Lean Six Sigma was applied as a tool to solve the first problem, whereas the other problem was managed by changing the production concept from push to pull. The results showed that after applying all new settings to the process, the defect rate was reduced from 36,361 DPPM to 3,029 DPPM. In addition, after the implementation of the Kanban system, the company achieved substantial improvement in lead time reduction by 44%, in-process inventory reduction by 42%, finished good inventory reduction by 50%, and finished good area increased by 16%.

  6. Solar physics applications of computer graphics and image processing

    Science.gov (United States)

    Altschuler, M. D.

    1985-01-01

    Computer graphics devices coupled with computers and carefully developed software provide new opportunities to achieve insight into the geometry and time evolution of scalar, vector, and tensor fields and to extract more information quickly and cheaply from the same image data. Two or more different fields which overlay in space can be calculated from the data (and the physics), then displayed from any perspective, and compared visually. The maximum regions of one field can be compared with the gradients of another. Time changing fields can also be compared. Images can be added, subtracted, transformed, noise filtered, frequency filtered, contrast enhanced, color coded, enlarged, compressed, parameterized, and histogrammed, in whole or section by section. Today it is possible to process multiple digital images to reveal spatial and temporal correlations and cross correlations. Data from different observatories taken at different times can be processed, interpolated, and transformed to a common coordinate system.

  7. sUAS and their application in observing geomorphological processes

    Science.gov (United States)

    Gallik, Jozef; Bolešová, Lenka

    2016-07-01

    Methodologies and procedures in processing gained data vary based on possibilities and needs of scientific projects. This paper should help to get a general overview in the choice of small unmanned aircraft systems (sUAS - commonly known as drones) for scientific purposes, namely remote sensing of geomorphologic processes such as soil degradation in high mountainous areas that are hard to access and have unfavourable weather conditions. All high mountain areas in European countries are legislatively protected, and so various permissions and observation of strict procedures are needed in order to not have a negative influence on the environment. Nowadays, several types of UAS exist that could effectively help us in such protection, as well as in full-fledged utilization when answering scientific questions about the alpine lake genesis. We demonstrate it here with selected examples of our photo documentation.

  8. ANALYTIC HIERARCHY PROCESS: AN APPLICATION IN GREEN BUILDING MARKET RESEARCH

    Directory of Open Access Journals (Sweden)

    Sharmin Attaran

    2013-01-01

    Full Text Available Sustainability has become a necessity in the building industry. In recent years, as the general public is more informed and aware of sustainability related issues, they are becoming major players in the decision making process regarding their built environment. However, there are still challenges with how sustainability is communicated to occupants and owners of buildings. As the global economic crisis is continuing, the marketing of green buildings needs to be refined to communicate the lifetime benefits of sustainability. One of the ways to develop effective marketing strategies, is to understand what the occupants value the most among many aspects of green buildings thus develop focused marketing solutions. Authors present a conceptual methodology using Analytic Hierarchy Process toward identifying consumer ranking and weights of a major green building rating system’s categories. Authors use sample non-representative data to illustrate the proposed methodology, while sharing preliminary qualitative data from the research in progress.

  9. Modelling of Electrokinetic Processes in Civil and Environmental Engineering Applications

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2011-01-01

    the porous materials undergoes an electroosmotic flow subject to externally applied electric fields. Electroosmotic transport makes electrokinetic techniques suitable for the mobilization of non-charged particles within the pore structure, such as the organic contaminants in soil. Chemical equilibrium...... gives good estimations of the results obtained from laboratory and pilot scale electrokinetic treatments. The model can be easily adapted to simulate different enhanced techniques and different chemical systems. Apart from the prediction ability, the detailed definition of the transport process...... to hinder the acid penetration; and an acid-enhanced electrokinetic soil remediation process, where the basic front is neutralized in order to avoid the precipitation of hydroxides of the target heavy metal....

  10. Non-traditional micromachining processes fundamentals and applications

    CERN Document Server

    Bhattacharyya, B; Davim, J

    2017-01-01

    This book presents a complete coverage of micromachining processes from their basic material removal phenomena to past and recent research carried by a number of researchers worldwide. Chapters on effective utilization of material resources, improved efficiency, reliability, durability, and cost effectiveness of the products are presented. This book provides the reader with new and recent developments in the field of micromachining and microfabrication of engineering materials.

  11. First passage times for Markov renewal processes and applications

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This paper proposes a uniformly convergent algorithm for the joint transform of the first passage time and the first passage number of steps for general Markov renewal processes with any initial state probability vector. The uniformly convergent algorithm with arbitrarily prescribed error can be efficiently applied to compute busy periods, busy cycles, waiting times, sojourn times, and relevant indices of various generic queueing systems and queueing networks. This paper also conducts a numerical experiment to implement the proposed algorithm.

  12. Space-Time Processing Applications for Wireless Communications

    OpenAIRE

    Hult, Tommy

    2008-01-01

    Wireless mobile communication networks are rapidly growing at an incredible rate around the world and a number of improved and emerging technologies are seen to be critical to the improved economics and performance of these networks. The technical revolution and continuing growth of mobile radio communication systems has been made possible by extraordinary advances in the related fields of digital computing, high-speed circuit technology, the Internet and, of course, digital signal processing...

  13. Application of Process Modeling Tools to Ship Design

    Science.gov (United States)

    2011-05-01

    Release; Distribution is unlimited. Different People – Different Preferences • We need to view process data in multiple formats. – DSM – GANTT Charts...CertificatePrograms/tRI Scheduling Software Spreadsheet Software Info Modeling Software DSM Tool Schedules IDEF Diagrams Spreadsheets DSM Schema 6/2...Chart Gantt Chart DSM Flow Chart by Geography 6/2/2011 3:41 PM 16Statement A: Approved for Public Release; Distribution is unlimited. Multi-domain

  14. Recombination Processes on Low Bandgap Antimonides for Thermophotovoltaic Applications

    Energy Technology Data Exchange (ETDEWEB)

    Saroop, Sudesh [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1999-09-01

    Recombination processes in antimonide-based (TPV) devices have been investigated using a technique, in which a Nd-YAG pulsed laser is materials for thermophotovoltaic radio-frequency (RF) photoreflectance used to excite excess carriers and the short-pulse response and photoconductivity decay are monitored with an inductively-coupled non-contacting RF probe. The system has been used to characterize surface and bulk recombination mechanisms in Sb-based materials.

  15. APPLICATION OF CLOUD TECHNOLOGY IN THE STOMATOLOGISTS EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Oksana A. Zorina

    2016-01-01

    Full Text Available Study the possibility of applying cloud technologies for the control of knowledge and the certification of specialists has been studied in the framework of realization of educational programs of internship and residency training in dental specialties. It was found that the management of the educational process in online mode is possible on the basis of distance education technologies using cloud technology. 

  16. Formal concept analysis in knowledge processing: a survey on applications.

    OpenAIRE

    Poelmans, Jonas; Ignatov, D.; Kuznetsov, S.; Dedene, Guido

    2013-01-01

    This is the second part of a large survey paper in which we analyze recent literature on Formal Concept Analysis (FCA) and some closely related disciplines using FCA. We collected 1072 papers published between 2003 and 2011 mentioning terms related to Formal Concept Analysis in the title, abstract and keywords. We developed a knowledge browsing environment to support our literature analysis process. We use the visualization capabilities of FCA to explore the literature, to discover and concep...

  17. Processing of hyperspectral medical images applications in dermatology using Matlab

    CERN Document Server

    Koprowski, Robert

    2017-01-01

    This book presents new methods of analyzing and processing hyperspectral medical images, which can be used in diagnostics, for example for dermatological images. The algorithms proposed are fully automatic and the results obtained are fully reproducible. Their operation was tested on a set of several thousands of hyperspectral images and they were implemented in Matlab. The presented source code can be used without licensing restrictions. This is a valuable resource for computer scientists, bioengineers, doctoral students, and dermatologists interested in contemporary analysis methods.

  18. Application of telerobotic control to remote processing of nuclear material

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, R.D.; Grasz, E.L.; Herget, C.J.; Gavel, D.T.; Addis, R.B.; DeMinico, G.A.

    1991-07-08

    In processing radioactive material there are certain steps which have customarily required operators working at glove box enclosures. This can subject the operators to low level radiation dosages and the risk of accidental contamination, as well as generate significant radioactive waste to accommodate the human interaction. An automated system is being developed to replace the operator at the glove box and thus remove the human from these risks, and minimize waste. Although most of the processing can be automated with very little human operator interaction, there are some tasks where intelligent intervention is necessary to adapt to unexpected circumstances and events. These activities will require that the operator be able to interact with the process using a remote manipulator in a manner as natural as if the operator were actually in the work cell. This robot-based remote manipulation system, or telerobot, must provide the operator with an effective means of controlling the robot arm, gripper and tools. This paper describes the effort in progress in Lawrence Livermore National Laboratory to achieve this capability. 8 refs.

  19. APPLICATION OF ABSORPTION SPECTROSCOPY TO ACTINIDE PROCESS ANALYSIS AND MONITORING

    Energy Technology Data Exchange (ETDEWEB)

    Lascola, R.; Sharma, V.

    2010-06-03

    The characteristic strong colors of aqueous actinide solutions form the basis of analytical techniques for actinides based on absorption spectroscopy. Colorimetric measurements of samples from processing activities have been used for at least half a century. This seemingly mature technology has been recently revitalized by developments in chemometric data analysis. Where reliable measurements could formerly only be obtained under well-defined conditions, modern methods are robust with respect to variations in acidity, concentration of complexants and spectral interferents, and temperature. This paper describes two examples of the use of process absorption spectroscopy for Pu analysis at the Savannah River Site, in Aiken, SC. In one example, custom optical filters allow accurate colorimetric measurements of Pu in a stream with rapid nitric acid variation. The second example demonstrates simultaneous measurement of Pu and U by chemometric treatment of absorption spectra. The paper concludes with a description of the use of these analyzers to supplement existing technologies in nuclear materials monitoring in processing, reprocessing, and storage facilities.

  20. Wiener-Hopf factorizations for a multidimensional Markov additive process and their applications to reflected processes

    Directory of Open Access Journals (Sweden)

    Masakiyo Miyazawa

    2012-01-01

    Full Text Available We extend the framework of Neuts' matrix analytic approach to a reflected process generated by a discrete time multidimensional Markov additive process. This Markov additive process has a general background state space and a real vector valued additive component, and generates a multidimensional reflected process. Our major interest is to derive a closed form formula for the stationary distribution of this reflected process. To this end, we introduce a real valued level, and derive new versions of the Wiener-Hopf factorization for the Markov additive process with the multidimensional additive component. In particular, itis represented by moment generating functions, and we consider the domain for it to be valid.Our framework is general enough to include multi-server queues and/or queueing networks as well as non-linear time series which are currently popular in financial and actuarial mathematics. Our results yield structural results for such models. As an illustration, we apply our results to extend existing results on the tail behavior of reflected processes.A major theme of this work is to connect recent work on matrix analytic methods to classical probabilistic studies on Markov additive processes. Indeed, using purely probabilistic methods such as censoring, duality, level crossing and time-reversal (which are known in the matrix analytic methods community but date back to Arjas & Speed [2] and Pitman [29], we extend and unify existing results in both areas.