Technical applications of aerogels

International Nuclear Information System (INIS)

Hrubesh, L.W.

1997-01-01

Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels

Survey of reader preferences concerning the format of NASA technical reports

Science.gov (United States)

Pinelli, T. E.; Glassman, M.; Cordle, V. M.

1982-01-01

A survey was conducted to determine the opinions of readers concerning the format (organization) of NASA technical reports and usage of technical report components. A survey questionnaire was sent to 513 LaRC engineers and scientists and 600 engineers and scientists from three (3) professional/technical societies. The response rates were 74 and 85 percent, respectively. The questionnaire included the order in which users read report components, the components reviewed or read to determine whether to read a report, report components which could be deleted, the desirability of a table of contents, the desirability of both a summary and abstract, the location of the symbols list and glossary, the integration of illustrative material, the preferred format for reference citations, column layout and right margin treatment, and person/voice. The results of the reader preference survey indicated that the conclusion was the component most often ready by survey respondents. The summary, conclusion, abstract, title page, and introduction were the components used most frequently to determine if a report would actually be read. Respondents indicated that a summary as well as an abstract should be included, that the definition of symbols and glossary of terms should be located in the front of the report, and that illustrative material should be integrated with the text rather than grouped at the end of the report. Citation by number was the preferred format for references. A one-column, ragged right margin was preferred. Third person, passive voice was the style of writing preferred by the respondents.

Applications of technical fusion in uroradiology

International Nuclear Information System (INIS)

Aigner, F.; Zordo, T. de; Junker, D.; Pallwein-Prettner, L.

2015-01-01

Technical fusion is defined as the ultrasound-guided navigation through a previously generated 3 D imaging dataset such as a computed tomography (CT) or magnetic resonance imaging (MRI). This technique allows for moving the fused CT/MRI datasets synchroneously with the real-time ultrasound in the same plane. Established and furthermore not yet described applications, the technical principles and the limitations of this promising technique will be introduced.

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next sessions will take place on the 19 and 26 February (Thursday mornings), with 8 participants at most. Course sessions will be self-paced and self-directed, with participants...

Application of engineering surveying in engineering industry

Directory of Open Access Journals (Sweden)

Lucia Forgáčová

2005-11-01

Full Text Available This is a presentation of the application of surveying principles used in a process of building the electrolytic tinning line at the U.S.Steel s.r.o. Kosice. The work involved is setting up a new network of measuring points, as well as the effective implementation of suitable methodologies, instruments and measuring tools. All of these were focal points for the survey, required during the installation of machinery units for the new tinning line. The coil producing technology utilised on the line entails a high speed movement. In this context all methods and final measurements were adapted to a very high standard of precision in order to ensure a safe working environment and exclude the risk of malfunctions in the final production stage. The smallest variations in the positioning of machinery units, compared with technical drawings, could rise a danger of coil breakdown, line malfunction or personal injury.

Preferences on technical report format - Results of a survey

Science.gov (United States)

Pinelli, T. E.; Cordle, V. M.; Glassman, M.; Vondran, R. F.

1984-01-01

A survey of 513 engineers and scientists employed at the National Aeronautics and Space Administration Langley Research Center and 600 engineers and scientists from three professional/technical societies solicited the opinions of report users concerning the format of NASA technical reports. The results indicate that a summary as well as an abstract should be included, that the definitions of symbols and glossary of terms should be located in the front of the report, and that the illustrative material should be integrated with the text rather than grouped at the end of the report. Citation of references by number, one-column, ragged-right-margin layout, and third-person writing style are also preferred by a majority of the respondents.

Bulletin Survey: Technical clarifications

CERN Multimedia

2002-01-01

In the latest of our articles on the results of the Bulletin survey, we respond to some of your technical comments on the Electronic Bulletin. Many thanks to the more than 500 of you who completed the questionnaire. The full statistics will be published next week. 'It takes too long to download the pages' Yes, it's true that the Electronic Bulletin's download time isn't perfect but it will improve when the Bulletin migrates to another, faster database. 'I find it very difficult to locate all the articles' Some people experience difficulty negotiating their way through the Bulletin once they have entered a specific section. The blue column on the left contains an 'In this issue' link taking you to the other sections. What's more, the whole of the paper Bulletin is available in the electronic version. As the latter is relatively new, however, it will take a bit of time to get used to browsing through it. Many of you say that it's still too early to form an opinion. 'Pull-down menus would be good, so that yo...

Internet application: production-technical information system MoNET

International Nuclear Information System (INIS)

Tomiga, J.

2004-01-01

MoNET is the production-technical information system supporting engineering, operational and maintenance processes of distribution network administrator. It utilizes the model of distribution network that is situated in the geo-space relational database. The geo-space database represents an information base of operational-technical processes. It contains elements and equipment s of the distribution network, failures, operational events, maintenance records, but also, parcels, reference planimetry, e.g. and other subjects for which is relevant the positional datum - geo-space information. MoNET is typically exploited in the fields: - evidence of the subjects and equipment of network, technical documentation; - property administration; - planning of network development, support of designing and construction; - technical calculation; - breakdown controller centre; - maintenance management. MoNET can be implemented as the desktop application, however its first benefit is derived from its usage as the intranet application MoNET WEB for the whole enterprise or organisation. This version enables an unrestricted number of end-users to enter this system. The end-users don't need any special software to enter the data of MoNet WEB application, the pre-installed Internet Explorer will do. (author)

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

Science.gov (United States)

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Identifying Architectural Technical Debt in Android Applications through Compliance Checking

NARCIS (Netherlands)

Verdecchia, R.

By considering the fast pace at which mobile applications need to evolve, Architectural Technical Debt results to be a crucial yet implicit factor of success. In this research we present an approach to automatically identify Architectural Technical Debt in Android applications. The approach takes

Technical survey of decommissioning of commercial power reactors

International Nuclear Information System (INIS)

Nakamura, Masahide

2003-01-01

The technical survey of decommissioning of commercial power reactors had been carried out from 1982 to 2003. The investigation items are scenarios, procedures, simplification and recycling. On the scenarios, the case studies on the decommissioning steps (1983 to 1984), evaluation of the prior conditions of case studies (1994 to 1998), evaluation of rationalization of the scenarios of decommissioning steps (1999 to 2001) and evaluation of the effects of investigation of clearance level (1999 to 2002) are described. Procedures (1985 to 1996) and simplification (1985 to 1987) of decommissioning are investigated. On the recycling, survey on recycle of waste produced by the decommissioning step (1985 to 1993) and recycle of demolition waste (1997 to 2002) are reported. Recycle of radioactive waste has to be controlled under lows. (S.Y.)

Retirement Applicant Satisfaction Survey Results

Data.gov (United States)

Social Security Administration — This dataset contains information about the Retirement Applicant Survey (RAS). The survey measured satisfaction results with the retirement application process. The...

Seminar Pediatrics. Medical and Technical Applications

International Nuclear Information System (INIS)

Montivero, M.; Nespral, D.O.; Alak, Maria del Carmen

2012-01-01

The Association of Biology and Nuclear Medicine has organized the 'Seminar Pediatrics - Medical and Technical Applications', held in Buenos Aires in May 2012, in order to collaborate with the scientific growth of nuclear medicine in pediatrics. The main topics covered were: management of pediatric patients and medical application in childhood, dosimetry in pediatric nuclear medicine, scope of radioisotope - studies in nephrourological pathologies, PET in pediatrics, among others.

Applicant Satisfaction Survey

Data.gov (United States)

Office of Personnel Management — The Chief Human Capital Officers developed 3 surveys that asks applicants to assess their satisfaction with the application process on a 1-10 point scale, with 10...

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-15

As part of the Photovoltaic Power Systems Programme, annual surveys of PV power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, as well as changing applications within that market, in the context of business situations, policies and relevant non-technical factors in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the fifth International Survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 1999 and analyses trends in the implementation of PV power systems between 1992 and 1999. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2000

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-15

As part of the PVPS programme, annual surveys of photovoltaics (PV) power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, and changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the sixth international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2000 and analyses trends in the implementation of PV power systems between 1992 and 2000. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1999

International Nuclear Information System (INIS)

2000-09-01

As part of the Photovoltaic Power Systems Programme, annual surveys of PV power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, as well as changing applications within that market, in the context of business situations, policies and relevant non-technical factors in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the fifth International Survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 1999 and analyses trends in the implementation of PV power systems between 1992 and 1999. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2000

International Nuclear Information System (INIS)

2001-09-01

As part of the PVPS programme, annual surveys of photovoltaics (PV) power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, and changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the sixth international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2000 and analyses trends in the implementation of PV power systems between 1992 and 2000. (author)

Technical evaluation of available state of Nevada survey instruments

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-02-01

Argonne National Laboratory (ANL) is reviewing the survey research studies completed by Mountain West Research (1987-1989) for the state of Nevada`s Nuclear Waste Project Office. In this research, 14 survey instruments were used to seek data on whether perceptions of risk could be associated with the possible siting of a high-level radioactive waste repository in Nevada and could be a dominant source of potential, significant, adverse economic impacts. This report presents results from phase 1 of the review, in which ANL contracted with the National Opinion Research Center (NORC) at the University of Chicago to evaluate the technical merits of the nine survey instruments that ANL had been able to acquire. The scope of NORC`s work was limited to rating the questions and stating their strengths and weaknesses. NORC concluded that the surveys could provide valuable data about risk perceptions and potential behavioral responses. NORC identified a few minor problems with a number of questions and the calculated response rates but claimed these problems would probably not have any major biasing effect. The NORC evaluation would have been more complete if the terms used in the questionnaires had been defined, all survey instruments had been acquired, and all data had been made available to the public.

Technical evaluation of available state of Nevada survey instruments

International Nuclear Information System (INIS)

1993-02-01

Argonne National Laboratory (ANL) is reviewing the survey research studies completed by Mountain West Research (1987-1989) for the state of Nevada's Nuclear Waste Project Office. In this research, 14 survey instruments were used to seek data on whether perceptions of risk could be associated with the possible siting of a high-level radioactive waste repository in Nevada and could be a dominant source of potential, significant, adverse economic impacts. This report presents results from phase 1 of the review, in which ANL contracted with the National Opinion Research Center (NORC) at the University of Chicago to evaluate the technical merits of the nine survey instruments that ANL had been able to acquire. The scope of NORC's work was limited to rating the questions and stating their strengths and weaknesses. NORC concluded that the surveys could provide valuable data about risk perceptions and potential behavioral responses. NORC identified a few minor problems with a number of questions and the calculated response rates but claimed these problems would probably not have any major biasing effect. The NORC evaluation would have been more complete if the terms used in the questionnaires had been defined, all survey instruments had been acquired, and all data had been made available to the public

Longitudinal Surveys of Australian Youth (LSAY): Derived Variables. Technical Report 64

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

This technical report describes the 24 derived variables developed for users of the Longitudinal Surveys of Australian Youth (LSAY) data. The variables fall into the categories education, employment and social, and help to simplify the complexity of the LSAY data by providing useful indicators for analysis. To help LSAY data users understand and…

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The Instructor-led CERN WBTechT course for Microsoft Applications is a new type of course offered in the framework of the Technical Training Programme, combining instructor-led and computer-based multimedia training, also known as "blended learning". The next sessions will take place on the 12, 19, and 26 February (Thursday mornings), and subsequent sessions will be organised following demand. Based on the new ElementK 2004 CERN WBTechT catalogue, courses will be self-paced and self-d...

Technical property and application of industrial computed tomography

International Nuclear Information System (INIS)

Sun Lingxia; Ye Yunchang

2006-01-01

The main technical property of industrial computed tomography (ICT) and its application in non-destructive testing (NDT) were described. And some examples of ICT applications in such fields as defects detection, welding quality, density uniformity, structure analysis and making-up quality were given. (authors)

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia.

Science.gov (United States)

Alkhayal, Abdullah; Aldhukair, Shahla; Alselaim, Nahar; Aldekhayel, Salah; Alhabdan, Sultan; Altaweel, Waleed; Magzoub, Mohi Elden; Zamakhshary, Mohammed

2012-01-01

After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors' perspective, and program directors' attitudes toward the available objective tools to assess technical skills. This study was a cross-sectional survey of surgical program directors (PDs). The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs' perspective and the PDs' attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated. Seventy-one (61%) participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative evaluation, whereas 15% perform only formative evaluations of their residents, and the remaining 22% conduct both summative and formative evaluations of their residents' technical skills. Operative portfolios are kept by 53% of programs. The percentage of programs with mechanisms for remediation is 29% (19 of 65). The survey showed that surgical training programs use different tools to assess surgical skills competency. Having a clear remediation mechanism was highly associated with reporting remediation, which reflects the capability to detect struggling residents. Surgical training leadership should invest more in

Technical specifications requirements: Automated reasoning applications

International Nuclear Information System (INIS)

Lidsky, L.M.; Dobrzeniecki, A.B.

1990-03-01

Several software systems were developed and tested to determine what advantages could be gained from explicitly translating complicated regulatory requirements into computerized relationships. The Technical Specifications for US nuclear power plants were chosen as the test-bed application domain, and two analysis systems were developed to monitor plant compliance with operational limits, and track and schedule equipment test and maintenance activities mandated by Technical Specifications. Choosing PROLOG as the computer language to represent these regulatory requirements resulted in a natural match between the semantic structure of the written specifications and the corollary coded rules. Additional research results affirmed the utility of declarative programming styles, explicit management of problem complexity, and attention to the robustness and flexibility of the overall software systems. 5 refs., 2 figs

Survey of utility robotic applications (1990)

International Nuclear Information System (INIS)

1991-08-01

This special report presents the results of a survey to identify areas of usage where utilities have found robotics to be most beneficial. The survey, which was conducted by U/M RUG, an ad hoc robotics group, should be of interest to all utilities interested in proven applications. The survey shows that robotics are finding increasing use in maintenance tasks, and in cleanup applications. Extended usage of precision positioning, dexterity, intelligence and mobility is not yet apparent. Improvements in these areas would greatly aid maintenance applications of robotics. 7 figs

National Survey Report of PV Power Applications in The Netherlands 2009. Task 1. Exchange and dissemination of information on PV power systems

International Nuclear Information System (INIS)

2010-12-01

The objective of Task 1 of the IEA Photovoltaic Power Systems Programme is to facilitate the exchange and dissemination of information on the technical, economic, environmental and social aspects of photovoltaic power systems. An important deliverable of Task 1 is the annual Trends in photovoltaic applications report. In parallel, National Survey Reports are produced annually by each Task 1 participant. This document is the Dutch National Survey Report for the year 2009. Information from this document will be used as input to the annual Trends in photovoltaic applications report.

Technical Meeting on Grading of the Application of Management System Requirements. Presentations

International Nuclear Information System (INIS)

2012-01-01

The objectives of this Technical Meeting are threefold: - to share international experiences and lessons learned, as well as exchange views on best practices and strategies to overcome the difficulties encountered; - to review and discuss the draft technical report on 'Grading the Application of Management System Requirements, to allow the participants to contribute to the improvement of the document and to enrich it with practical examples; and - to strengthen the international networking of specialists in the field. The topics covered during the meeting will include: - Examples and case studies presented by participants from countries with nuclear facilities (mainly focused on NPPs, and, where appropriate, from research reactors, fuel cycle and waste management facilities) on grading the application of management system requirements and lessons learned. - Reviewing and improving the final draft of a technical report on 'Grading the Application of Management System Requirements', which will supersede the previous guidance: Grading of Quality Assurance Requirement: A Manual (Technical Reports Series No. 328)

Longitudinal Surveys of Australian Youth (LSAY): 2006 Cohort Wave 4 (2009)--Questionnaire. Technical Report 56A

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This technical paper contains the questionnaire for the LSAY 2006 cohort Wave 4 (2009) data set. [For the "Longitudinal Surveys of Australian Youth (LSAY):…

Technical diagnosis of industrial plants with radioisotopes

International Nuclear Information System (INIS)

Hartmann, G.

1984-01-01

A survey is given of the application of radioisotopes in technical diagnosis of industrial plants. Proceeding from the economic importance and the state of the art of radioisotope applications, the principles of tracer techniques are outlined including topical examples of application such as passage of coal through a steam generator, wear in impact crashing of coal, wear and corrosion in pipelines, testing the effective cross section of pipes, and investigations of microstructures. Limits and restrictions of applications are briefly discussed

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort Derived Variables. Technical Report 69

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

This technical report details the derived variables developed for users of the Longitudinal Surveys of Australian Youth (LSAY) data. The derived variables fall into the categories education, employment and social, and help to simplify the complexity of the LSAY data by providing useful indicators for analysis. To help LSAY data users understand…

Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on 7 September, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

Technical Report: Unmanned Helicopter Solution for Survey-Grade Lidar and Hyperspectral Mapping

Science.gov (United States)

Kaňuk, Ján; Gallay, Michal; Eck, Christoph; Zgraggen, Carlo; Dvorný, Eduard

2018-05-01

Recent development of light-weight unmanned airborne vehicles (UAV) and miniaturization of sensors provide new possibilities for remote sensing and high-resolution mapping. Mini-UAV platforms are emerging, but powerful UAV platforms of higher payload capacity are required to carry the sensors for survey-grade mapping. In this paper, we demonstrate a technological solution and application of two different payloads for highly accurate and detailed mapping. The unmanned airborne system (UAS) comprises a Scout B1-100 autonomously operating UAV helicopter powered by a gasoline two-stroke engine with maximum take-off weight of 75 kg. The UAV allows for integrating of up to 18 kg of a customized payload. Our technological solution comprises two types of payload completely independent of the platform. The first payload contains a VUX-1 laser scanner (Riegl, Austria) and a Sony A6000 E-Mount photo camera. The second payload integrates a hyperspectral push-broom scanner AISA Kestrel 10 (Specim, Finland). The two payloads need to be alternated if mapping with both is required. Both payloads include an inertial navigation system xNAV550 (Oxford Technical Solutions Ltd., United Kingdom), a separate data link, and a power supply unit. Such a constellation allowed for achieving high accuracy of the flight line post-processing in two test missions. The standard deviation was 0.02 m (XY) and 0.025 m (Z), respectively. The intended application of the UAS was for high-resolution mapping and monitoring of landscape dynamics (landslides, erosion, flooding, or crops growth). The legal regulations for such UAV applications in Switzerland and Slovakia are also discussed.

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

Science.gov (United States)

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. The application must contain a final safety analysis... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.157 Section 52.157 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

Science.gov (United States)

2010-01-01

...; technical information in final safety analysis report. (a) The application must contain a final safety... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.79 Section 52.79 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

Longitudinal Surveys of Australian Youth (LSAY): 2006 Cohort Wave 4 (2009)--Frequency Tables. Technical Report 56B

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This technical paper contains the frequency tables for the LSAY 2006 cohort Wave 4 (2009) data set. [For the "Longitudinal Surveys of Australian Youth (LSAY):…

Handbook of technical diagnostics fundamentals and application to structures and systems

CERN Document Server

2013-01-01

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and r...

Teaching and Learning International Survey (TALIS) 2013: U.S. Technical Report. NCES 2015-010

Science.gov (United States)

Strizek, Gregory A.; Tourkin, Steve; Erberber, Ebru

2014-01-01

This technical report is designed to provide researchers with an overview of the design and implementation of the Teaching and Learning International Survey (TALIS) 2013. This information is meant to supplement that presented in OECD publications by describing those aspects of TALIS 2013 that are unique to the United States. Chapter 2 provides…

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia

Directory of Open Access Journals (Sweden)

Alkhayal A

2012-10-01

Full Text Available Abdullah Alkhayal,1 Shahla Aldhukair,2 Nahar Alselaim,1 Salah Aldekhayel,1 Sultan Alhabdan,1 Waleed Altaweel,3 Mohi Elden Magzoub,4 Mohammed Zamakhshary1,21Department of Surgery, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia; 2Public Health Section, King Abdullah International Medical Research Center, Riyadh, Saudi Arabia; 3Urology Department, King Faisal Specialist Hospital and Research Center, Riyadh, Saudi Arabia; 4Department of Medical Education, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi ArabiaBackground: After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors’ perspective, and program directors’ attitudes toward the available objective tools to assess technical skills.Methods: This study was a cross-sectional survey of surgical program directors (PDs. The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs’ perspective and the PDs’ attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated.Results: Seventy-one (61% participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2004

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

As part of the work of the IEA PVPS programme, annual surveys of photovoltaic (PV) power applications and markets are carried out in the participating countries. The objective of the series of annual Trends reports is to present and interpret developments in both the PV systems and components being used in the PV power systems market and the changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-}0 %. Data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. This report presents the results of the 10th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2004 and analyzes trends in the implementation of PV power systems between 1992 and 2004. (au)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2009

International Nuclear Information System (INIS)

2010-08-01

As part of the work of the IEA PVPS programme, annual surveys of photovoltaic (PV) power applications and markets are carried out in the reporting countries. The objective of the series of annual Trends reports is to present and interpret developments in both the PV systems and components being used in the PV power systems market and the changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ±10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. This report presents the results of the 15th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2009 and analyzes trends in the implementation of PV power systems between 1992 and 2009.

Survey of Instant Messaging Applications Encryption Methods

OpenAIRE

Kabakuş, Abdullah; Kara, Resul

2015-01-01

Instant messaging applications has already taken the place of traditional Short Messaging Service (SMS) and Multimedia Messaging Service (MMS) due to their popularity and usage easement they provide. Users of instant messaging applications are able to send both text and audio messages, different types of attachments such as photos, videos, contact information to their contacts in real time. Because of instant messaging applications use internet instead of Short Message Service Technical Reali...

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

Energy Technology Data Exchange (ETDEWEB)

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Technical Note: Application of Decision Theory Based Criteria for ...

African Journals Online (AJOL)

Technical Note: Application of Decision Theory Based Criteria for Structural Appraisal of a Building during Construction. ... Nigerian Journal of Technology ... reliability of concrete in a structure during construction, a case study of laboratory block for College of Continuing Education, University of Port Harcourt, Rivers State.

Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

CERN Multimedia

Monique Duval

2004-01-01

Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nati...

Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

CERN Multimedia

Monique Duval

2004-01-01

Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nat...

Application of tracer techniques and technical means in ferrous, non-ferrous and hydrometallurgy

International Nuclear Information System (INIS)

Chizhek, L.; Myshak, F.; Shtrba, J.

1979-01-01

Brief data are given about the results of joint investigations and developments of the problems of radioisotope methods and technical means application in ferrous and hydrometallurgy, obtained during the period of 1976-1977. Development of these problems was done in the frameworks of the plan of scientific and technical cooperation of the CMEA member-states and Yugoslavia. Results are given of the development of following themes: investigation of metallurgic processes by means of activation analysis; investidations of metallurgic processes by means of autoradiography and X-ray feuorescent analysis; control and automatization of metallurgic processes by means of radioisotope instruments; investigation of processes of melting of cast iron and steel as well as of processes of treatment of metals by means of the radioactive indicators method, activation analysis and radioisotope instruments; application of the radioisotope methods and technical means for investigation of processes of production of non-ferrous metals; application of the radioisotope methods for investigations of the hydrometallurgy processes [ru

New York City School Survey 2008-2010: Assessing the Reliability and Validity of a Progress Report Measure. Technical Appendices

Science.gov (United States)

Nathanson, Lori; Cole, Rachel; Kemple, James J.; Lent, Jessica; McCormick, Meghan; Segeritz, Micha

2013-01-01

The Research Alliance for New York City Schools examined Department of Education (DOE) School Survey data from 2008-2010 to better understand the richness and complexities of the information elicited by the Survey from parents, students, and teachers. This document provides the appendices to the technical report "New York City School Survey…

Literature Survey on Technical Issues and Insights of Multi-Unit PSA

International Nuclear Information System (INIS)

Baek, Sejin; Park, Soyoung; Heo, Gyunyoung

2016-01-01

The need consider the risk impact in case of multi-unit in a single site increased after the accident at Fukushima Daiichi in March 2011. This means that we have to consider the single-unit initiators impacting the other units and the simultaneous accidents of the multi-unit on the same site. Particularly, this kind of technical concern is serious in case of the Republic of Korea where multi-units had to be located in high-density population area due to geographical features. The Nuclear Safety and Security Commission (NSSC) in the Republic of Korea has been trying to identify the state of the art of international and domestic regulations and techniques on multi-unit risk assessment and planning the road map for the safety researches. However, we have to say that finding a common accepted methodology along with safety criteria for multi-unit PSA was not an easy task up to now. This paper summarizes and analyzes related international and domestic journals' papers, conferences' papers and reports about the multi-unit PSA classifying categories with themes to understand the technical tendency of multi-unit PSA. In addition, some insights that were obtained from this classification have been arranged too. This paper investigated the technical trend of the multi-unit PSA as collecting of the international and domestic journals' papers, conferences papers and reports, and analyzing them. Upon the literature survey, a few statistics, technical issues, and insights were summarized. Both of the fundamental and practical researches need to find a globally accepted methodology to calculate and determine quantitative objectives for a multi-unit PSA. We want to expect that this paper can be shared to understand the current status of multi-unit PSA

Literature Survey on Technical Issues and Insights of Multi-Unit PSA

Energy Technology Data Exchange (ETDEWEB)

Baek, Sejin; Park, Soyoung; Heo, Gyunyoung [Kyung Hee Univ., Yongin (Korea, Republic of)

2016-10-15

The need consider the risk impact in case of multi-unit in a single site increased after the accident at Fukushima Daiichi in March 2011. This means that we have to consider the single-unit initiators impacting the other units and the simultaneous accidents of the multi-unit on the same site. Particularly, this kind of technical concern is serious in case of the Republic of Korea where multi-units had to be located in high-density population area due to geographical features. The Nuclear Safety and Security Commission (NSSC) in the Republic of Korea has been trying to identify the state of the art of international and domestic regulations and techniques on multi-unit risk assessment and planning the road map for the safety researches. However, we have to say that finding a common accepted methodology along with safety criteria for multi-unit PSA was not an easy task up to now. This paper summarizes and analyzes related international and domestic journals' papers, conferences' papers and reports about the multi-unit PSA classifying categories with themes to understand the technical tendency of multi-unit PSA. In addition, some insights that were obtained from this classification have been arranged too. This paper investigated the technical trend of the multi-unit PSA as collecting of the international and domestic journals' papers, conferences papers and reports, and analyzing them. Upon the literature survey, a few statistics, technical issues, and insights were summarized. Both of the fundamental and practical researches need to find a globally accepted methodology to calculate and determine quantitative objectives for a multi-unit PSA. We want to expect that this paper can be shared to understand the current status of multi-unit PSA.

Application of owner technical management in hydraulic machinery and electrical equipment investment target control

International Nuclear Information System (INIS)

Luo, H

2012-01-01

Using technical means in investment target control is an effective method to improve investment benefit of a construction project. Take the practice of construction and management in hydropower station as an example, the investment and management need of the owner is put forward through the investment target decision-making process of electromechanical equipment. Owner technical management in the specific application measures and effects of investment target control was discussed in the paper, and the revelation in investment target control application of owner technical management was also summarized. The paper is aimed to provide a useful reference for the investment target control work in the construction of electromechanical equipment.

A survey-based cross-sectional study of doctors’ expectations and experiences of non-technical skills for Out of Hours work

Science.gov (United States)

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-01-01

Objectives The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Design Survey-based cross-sectional study informed by focus groups. Setting Online survey with participants from five large teaching hospitals across the UK. Participants 300 Medical Students and Doctors Outcome measure Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. Results The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey ‘Task Prioritisation’ (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for ‘Communication with Senior Doctors’, ‘Dealing with Clinical Isolation’, ‘Task Prioritisation’ and ‘Communication with Patients’. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Conclusions Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. PMID:25687899

A survey-based cross-sectional study of doctors' expectations and experiences of non-technical skills for Out of Hours work.

Science.gov (United States)

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-02-16

The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Survey-based cross-sectional study informed by focus groups. Online survey with participants from five large teaching hospitals across the UK. 300 Medical Students and Doctors Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey 'Task Prioritisation' (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for 'Communication with Senior Doctors', 'Dealing with Clinical Isolation', 'Task Prioritisation' and 'Communication with Patients'. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

EXPANSION OF OBJECTIVES OF THE PRACTICAL APPLICATION OF TECHNICAL AUDIT AT RAILWAY TRANSPORT ENTERPRISES

Directory of Open Access Journals (Sweden)

A. M. Okorokov

2017-12-01

Full Text Available Purpose. The work is aimed to study, compare and summarize information on the current state and peculiarities of conducting technical audit in various branches of business in order to obtain the possibility of developing proposals for expanding the objectives of this procedure in railway enterprises. Methodology. In the course of the research there were used the methods of analysis and synthesis to study the content and basic provisions of scientific publications, normative legal acts of Ukraine, and other data on conducting technical audit in the field of industry, construction, gas extraction, electricity, marine and rail transport, followed by their comparison and generalization. Findings. Taking into account the positive experience of the audit carrying out in other sectors the article expands the goals of practical application of technical audit in railway transport enterprises. This envisages assessment of the current technical condition and the residual life of exploited vehicles and equipment of PJSC "Ukrzaliznytsia". As a result, there is an opportunity to detect and activate the reserves for improving the efficiency of railway transport enterprises, estimating and forecasting the costs for repair cycles and modernization, as well as for increasing the train safety level and improving investment attractiveness of the industry. Originality. The obtained results make it possible to broaden the concept of "technical audit" in railway transport, to define the purpose of its carrying out and the list of tasks. Application of the extended technical audit will provide an opportunity to receive objective information on the actual technical condition of the objects of the railway infrastructure, means of transport and equipment, and to use it for the formation of development programs as individual enterprises and the railway as a whole. Practical value. Expanding the goals of practical application of the technical audit at railway enterprises

Longitudinal Surveys of Australian Youth (LSAY) 1998 Cohort: Wave 12 (2009)--Questionnaire. Technical Report 58A

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This technical paper contains the questionnaire for the LSAY 1998 cohort Wave 12 (2009) data set. [For the accompanying frequency tables, "Longitudinal Surveys…

Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort: Wave 2 (2010)--Frequency Tables. Technical Report 71B

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This technical paper contains the frequency tables for the LSAY 2009 cohort Wave 2 (2010) data set.

A study on decision-making framework for developing risk-informed technical specifications

International Nuclear Information System (INIS)

Kim, Beom Seock

2002-02-01

The utility and the nuclear research institutes in Korea have conduct research for improving inefficient requirements in technical specifications using the results of probability risk assessments and information associated with risk. However, the guidance for reviewing the improved technical specifications has not been developed. Thus, the objective of this study is to develop a decision-making framework for investigating and reviewing the documents associated with the changes of technical specifications. This work has been done for helping the regulation agency to review the improved technical specifications as well as to make decisions whether the remedy is accepted or not. The contents of this study include: 1. Surveys on Technical Specification regulations in foreign countries as well as those in Korea 2. Surveys on the state- of- the- art methodology for Risk Informed Technical Specifications and their uses in Korea 3. Development of a decision-making framework in both the licensee and the regulation agency position 4. Development and applications of a decision-making framework using Influence Diagrams. The decision-making framework for RITS using Influence Diagrams are developed and applied to an example problem in this study. This work might contribute to developing the risk informed regulation guidance for improving the quality of the current technical specifications

An Evaluation of the Federal Energy Management Program Technical Assistance Workshops: Results of a 1998 Customer Survey

Energy Technology Data Exchange (ETDEWEB)

G. B. Gordon; N. Hall

1999-04-01

This report presents the results of a customer telephone survey of the participants of six workshops provided by the U. S. Department of Energy Federal Energy Management Program (FEMP) during calendar years 1995 and 1996. The primary purpose for the survey was to provide the Team Leader for FEMP Technical Assistance and members of the team with detailed customer feedback pertaining to how well selected FEMP workshops are doing and to identify areas for improvement. The information presented enables managers to see both the strengths of their workshops, as well as workshop components that can be improved. In addition, the report identifies the questions included in the survey that were the most productive for obtaining customers experiences, opinions and recommendations. The experiences gained during this survey provide a platform from which to launch an annual FEMP customer survey.

Applications of the Theory of Technical Systems

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup; McAloone, Timothy Charles

2008-01-01

of Vladimir Hubka and a short historical sketch of the incidental nature of our group’s introduction to Vladimir Hubka, which led to life long cooperation and academic development. Results have been obtained in the areas of DFX, workbench-based design, mechatronics, product development, and multi......This paper uses the development and applications of Hubka’s Theory of Technical Systems (TTS) at DTU as an example of the power of the theory, the necessity of detailing and fitting the theory, and the role of a theory as a basis for research.At the same time the paper is a balance of the influence...

Linked-cone DEA profit ratios and technical efficiency with application to Illinois coal mines

Energy Technology Data Exchange (ETDEWEB)

Thompson, R.G.; Dharmapala, P.S.; Thrall, R.M. [University of Houston, Houston, TX (United States). Dept. of Decision and Information Sciences

1995-04-01

The authors develop a theory stating that Data Envelopment Analysis (DEA) profit ratios and technical efficiency measures require separate treatment. This point is illustrated by analysis of an example problem; showing that DEA technical efficiency does not necessarily imply a DEA maximum profit ratio; and that a DEA maximum profit ratio does not necessarily imply DEA technical efficiency. The mathematical framework underlying this argument is provided. Application of the concepts to Illinois coal mining data lends support to the need for separate treatment of DEA technical efficiency and DEA profit ratios. 31 refs., 4 figs., 9 tabs.

Linked-cone DEA profit ratios and technical efficiency with application to Illinois coal mines

International Nuclear Information System (INIS)

Thompson, R.G.; Dharmapala, P.S.; Thrall, R.M.

1995-01-01

The authors develop a theory stating that Data Envelopment Analysis (DEA) profit ratios and technical efficiency measures require separate treatment. This point is illustrated by analysis of an example problem; showing that DEA technical efficiency does not necessarily imply a DEA maximum profit ratio; and that a DEA maximum profit ratio does not necessarily imply DEA technical efficiency. The mathematical framework underlying this argument is provided. Application of the concepts to Illinois coal mining data lends support to the need for separate treatment of DEA technical efficiency and DEA profit ratios. 31 refs., 4 figs., 9 tabs

Literature survey of heat transfer enhancement techniques in refrigeration applications

Energy Technology Data Exchange (ETDEWEB)

Jensen, M.K.; Shome, B. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Mechanical Engineering, Aeronautical Engineering and Mechanics

1994-05-01

A survey has been performed of the technical and patent literature on enhanced heat transfer of refrigerants in pool boiling, forced convection evaporation, and condensation. Extensive bibliographies of the technical literature and patents are given. Many passive and active techniques were examined for pure refrigerants, refrigerant-oil mixtures, and refrigerant mixtures. The citations were categorized according to enhancement technique, heat transfer mode, and tube or shell side focus. The effects of the enhancement techniques relative to smooth and/or pure refrigerants were illustrated through the discussion of selected papers. Patented enhancement techniques also are discussed. Enhanced heat transfer has demonstrated significant improvements in performance in many refrigerant applications. However, refrigerant mixtures and refrigerant-oil mixtures have not been studied extensively; no research has been performed with enhanced refrigerant mixtures with oil. Most studies have been of the parametric type; there has been inadequate examination of the fundamental processes governing enhanced refrigerant heat transfer, but some modeling is being done and correlations developed. It is clear that an enhancement technique must be optimized for the refrigerant and operating condition. Fundamental processes governing the heat transfer must be examined if models for enhancement techniques are to be developed; these models could provide the method to optimize a surface. Refrigerant mixtures, with and without oil present, must be studied with enhancement devices; there is too little known to be able to estimate the effects of mixtures (particularly NARMs) with enhanced heat transfer. Other conclusions and recommendations are offered.

Longitudinal Surveys of Australian Youth (LSAY) 1998 Cohort: Wave 12 (2009)--Frequency Tables. Technical Report 58B

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This technical paper contains the frequency tables for the LSAY 1998 cohort Wave 12 (2009) data set. [For the accompanying questionnaire, "Longitudinal Surveys…

Technical note: New applications for on-line automated solid phase extraction

OpenAIRE

MacFarlane, John D.

1997-01-01

This technical note explains the disadvantages of manual solid phase extraction (SPE) techniques and the benefits to be gained with automatic systems. The note reports on a number of general and highly specific applications using the Sample Preparation Unit OSP-2A.

The LLL algorithm survey and applications

CERN Document Server

Nguyen, Phong Q

2010-01-01

The first book to offer a comprehensive view of the LLL algorithm, this text surveys computational aspects of Euclidean lattices and their main applications. It includes many detailed motivations, explanations and examples.

Applications of technical fusion in uroradiology; Einsatzmoeglichkeiten der technischen Fusion in der Uroradiologie

Energy Technology Data Exchange (ETDEWEB)

Aigner, F.; Zordo, T. de; Junker, D. [Medical University Innsbruck (Austria). Radiology; Pallwein-Prettner, L. [Sisters of Charity Hospital, Linz (Austria). Radiology

2015-05-15

Technical fusion is defined as the ultrasound-guided navigation through a previously generated 3 D imaging dataset such as a computed tomography (CT) or magnetic resonance imaging (MRI). This technique allows for moving the fused CT/MRI datasets synchroneously with the real-time ultrasound in the same plane. Established and furthermore not yet described applications, the technical principles and the limitations of this promising technique will be introduced.

Technical study of torsional transit-time magnetic pumping (TTMP) heating. Application for PETULA and large machines

International Nuclear Information System (INIS)

Brossaud, J.; Lanier, R.; Perin, J.P.; Rey, G.

1980-11-01

This report describes a computer program which determines the RF current distributions and the corresponding voltage and dissipated powers in the conductors for the application of torsional TTMP heating. The results fit well with a Petula-scale experiments. Two prototype coils have been studied and tested for Petula. The application for JET points out the main technical problems which need further developments to ensure the technical feasibility of this method [fr

Power system technical performance issues related to the application of long HVAC cables

DEFF Research Database (Denmark)

Wiechowski, on behalf of Cigre WG C4.502, W.; Sluis, L. V. der; Ohno, Teruo

2011-01-01

This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary...... for assessing the technical performance of HV/EHV systems with large share of AC cable lines. This paper besides providing a background for formulation of WG C4.502 and its overall aim, describes the tasks that were accomplished before the interim report was submitted to Study Committee C4 System Technical...... Performance in August 2010. The work in the WG is ongoing and final report will be ready according to the time schedule in 2012. The focus of this paper is in particular to show all issues related to system technical performance with assigned weights in terms of their importance and/or uniqueness for cable...

10 CFR Appendix III to Part 960 - Application of the System and Technical Guidelines During the Siting Process

Science.gov (United States)

2010-01-01

... 960—Application of the System and Technical Guidelines During the Siting Process 1. This appendix... 10 Energy 4 2010-01-01 2010-01-01 false Application of the System and Technical Guidelines During the Siting Process III Appendix III to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE...

Study on the promotion of international cooperation through the technical exhibition on RI production and application

Energy Technology Data Exchange (ETDEWEB)

Park, Kyung Bae; Hong, Y D; Han, H S. and others

2001-05-01

For the IAEA Technical Exhibition, it was required to analyze the all the informations from the researches which has been done till recently related to the applications of radiation and radioisotopes. A few aspects drawn from the analysis were made and it was able to represent the scopes and the prospects regarding the applications of radiation and radioisotopes developed in Korea at the IAEA Technical Exhibition. Exhibition was mainly focus into the RI production, utilization in medical, engineering and agricultural fields and irradiation of food products. Exhibition representing Korea were readily prepared under the entitled name of 'Pillars for Quality of Life', Multi-cube and Panel presentation at the same time. IAEA Technical Exhibition was held from September 18 to 21, 2000. Exhibition was successfully proceeded and presentation led to get the attention from IAEA Member Counturies including developed and developing countries about Korea's recent development on improving quality of human life using radiation and radioisotopes. The outcome of IAEA Technical Exhibition prepared by based on the successful experiences and activity related to the subjects was primarily on the elucidation of international cooperation between Korea and foreign countries. Multi-cube and Panel presentation expressed fully and effectively the scopes of the researches recently undergone in Korea and the efforts put into the technical development on radiation and radioisotopes application. In addition, other important research results were provided by Leaflet and those were about 'Radioisotope Production', 'Application of Radioisotope Tracers', 'Wastewater Treatment by Irradiation' and 'Food Irradiation'. All the exhibition materials including Compact Diskette were prepared in English for the IAEA Technical Exhibition held in Austria Center Vienna during the 44th IAEA General Conference. The reported informations and materials should be employed to the other objectives like presentation

Study on the promotion of international cooperation through the technical exhibition on RI production and application

International Nuclear Information System (INIS)

Park, Kyung Bae; Hong, Y. D.; Han, H. S. and others

2001-05-01

For the IAEA Technical Exhibition, it was required to analyze the all the informations from the researches which has been done till recently related to the applications of radiation and radioisotopes. A few aspects drawn from the analysis were made and it was able to represent the scopes and the prospects regarding the applications of radiation and radioisotopes developed in Korea at the IAEA Technical Exhibition. Exhibition was mainly focus into the RI production, utilization in medical, engineering and agricultural fields and irradiation of food products. Exhibition representing Korea were readily prepared under the entitled name of 'Pillars for Quality of Life', Multi-cube and Panel presentation at the same time. IAEA Technical Exhibition was held from September 18 to 21, 2000. Exhibition was successfully proceeded and presentation led to get the attention from IAEA Member Counturies including developed and developing countries about Korea's recent development on improving quality of human life using radiation and radioisotopes. The outcome of IAEA Technical Exhibition prepared by based on the successful experiences and activity related to the subjects was primarily on the elucidation of international cooperation between Korea and foreign countries. Multi-cube and Panel presentation expressed fully and effectively the scopes of the researches recently undergone in Korea and the efforts put into the technical development on radiation and radioisotopes application. In addition, other important research results were provided by Leaflet and those were about 'Radioisotope Production', 'Application of Radioisotope Tracers', 'Wastewater Treatment by Irradiation' and 'Food Irradiation'. All the exhibition materials including Compact Diskette were prepared in English for the IAEA Technical Exhibition held in Austria Center Vienna during the 44th IAEA General Conference. The reported informations and materials should be employed to the other objectives like presentation

Technical surveys on MHD combustors. Surveys on incorporation of pressurized coal partial combustion furnaces; MHD combustor gijutsu chosa. Kaatsugata sekitan bubun nenshoro no donyu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

The pressurized coal partial combustion (PCPC) furnace is surveyed/studied for its incorporation in MHD generation. The technical development of the atmospheric CPC has been basically completed, and the concept is demonstrated using a test system of commercial size. Many techniques developed for the atmospheric CPC are applicable to the PCPC system. These include structures of the CPC furnace walls, and slag handling and simulation techniques. Combination of PFBC with PCPC or IGCC can bring about many merits, e.g., enhanced efficiency and abated NOx emissions for the combined cycle power generation. These topping cycles, therefore, should be developed in the early stage. MHD power generation is one of the concepts that can enhance efficiency. In particular, the techniques for closed cycle MHD generation have notably advanced recently. The PCPC techniques are useful for coal combustors for MHD generation. Full-scale development works for the direct coal combustion gas turbine systems have been just started for the IGCC systems of the next generation, and the PCPC-related techniques are expected to serve as the central techniques for these turbine systems. (NEDO)

Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

International Nuclear Information System (INIS)

1976-01-01

Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort--User Guide. Data Elements C: Employment. Technical Report 49C

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This technical paper contains information about the variables in the Longitudinal Surveys of Australian Youth (LSAY) Year 95 cohort data set. It groups each variable into data elements that identify common variables within and across waves. Information is provided about each data element including its purpose, values, base populations and relevant…

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort--User Guide. Data Elements D: Social. Technical Report 49D

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This technical paper contains information about the variables in the Longitudinal Surveys of Australian Youth (LSAY) Year 95 cohort data set. It groups each variable into data elements that identify common variables within and across waves. Information is provided about each data element including its purpose, values, base populations and relevant…

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort--User Guide. Data Elements A: Demographics. Technical Report 49A

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

This technical paper contains information about the variables in the LSAY (Longitudinal Surveys of Australian Youth) Y95 cohort data set. It groups each variable into data elements which identifies common variables within and across waves. Information is provided about each data element including its purpose, values, base populations and relevant…

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned.

Science.gov (United States)

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, Aids

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting.

AIMES Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

2017-01-31

This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

Supercapacitors technical requirements for new applications

Energy Technology Data Exchange (ETDEWEB)

Conte, M. [Agenzia Nazionale per le Nuove Tecnologie, l' Energia e lo Sviluppo Economico Sostenibile (ENEA), Technical Unit ' Advanced Technologies for Energy and Industry' , C.R. Casaccia, Via Anguillarese, 301, 00066 Roma (Italy)

2010-10-15

The supercapacitors (SCs), also called ultracapacitors or electrochemical capacitors, are devices with a very high specific power and high capacitance, available for a long period of time with negligible deterioration, that have been historically proposed in small applications (memory back-up in consumer electronics and storage systems for microsolar power generators) and now are proposed for high power/energy applications, such as hybrid and electric vehicles, power quality systems and smart grids. The advancements in new materials and the rapid growth of more demanding storage systems in a variety of applications have created a lack of universally accepted definitions of these devices and, consequently, a real difficulty in describing developments and progress in the SC field. This paper contains a brief survey of the history of the SC development, which is strongly related to the evolution of the SC technologies, tentatively classified in symmetric, asymmetric and hybrid. A short presentation of key parameters has been given to introduce the description of new applications with large SC devices, covering transport, industrial and electric utility sectors, with some reflections about the foreseen impacts on the future market more than quadrupled in 5 years up to almost $877 million worldwide. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Technical Survey and Feasibility Review for Development of IV-CEAPI

International Nuclear Information System (INIS)

Jang, Yongtae; Park, Jinseok; Lee, Myounggoo; Cho, Yeonho; Kim, Hyunmin

2016-01-01

The purpose of this paper is to establish the development direction of the IV-CEAPI(Control element assembly position indicator). The paper presents the technologies of the existing CEAPI and other linear displacement sensors. The paper also presents feasibility review of those technologies for the IV-CEAPI considering its environmental conditions as shown in Table 1. an instrument to monitor vertical position of the control element assembly (CEA) in nuclear reactors. The CEAPI is installed in each control element drive mechanism (CEDM). The conventional CEDMs are installed outside the reactor vessel (RV) with nozzles penetrating the RV head. To select the type of the IV-CEAPI, technical surveys on linear displacement sensors were performed. Feasibility of those sensors was reviewed considering the environment conditions, experience, reliability and simplicity. The result is summarized in Table 2 which implies that the solenoid type is considered to be the best suitable types for the IV-CEAPI

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 65: Survey of Reader Preferences Concerning the Format of NASA Langley-Authored Technical Reports

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1997-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. Little is also known about the intermediary-based system that is used to transfer the results of federally funded R&D to the U.S. aerospace industry. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. In this article, we summarize the literature on the U.S. government technical report and present the results of a survey of U.S. aerospace engineers and scientists that solicited their opinions concerning the format of NASA Langley Research Center (LaRC)-authored technical reports. To learn more about the preferences of U.S. aerospace engineers and scientists concerning the format of NASA LaRC-authored technical reports, we surveyed 133 report producers (i.e., authors) and 137 report users in March-April 1996. Questions covered such topics as: (a) the order in which report components are read; (b) components used to determine if a report would be read; (c) those components that could be deleted; (d) the placement of such components as the symbols list; (e) the desirability of a table of contents; (f) the format of reference citations; (g) column layout and right margin treatment; and (h) writing style in terms of person and voice. Mail (self-reported) surveys were used to collect the data. The response rates for report producers (i.e., authors) was 68% and for users was 62%.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 58; Survey of Reader Preferences Concerning the Format of NASA Langley-Authored Technical Reports

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1996-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. Little is also known about the intermediary-based system that is used to transfer the results of federally funded R&D to the U.S. aerospace industry. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this paper, we summarize the literature on the U.S. government technical report and present the results of a survey of U.S. aerospace engineers and scientists that solicited their opinions concerning the format of NASA Langley Research Center (LaRC)-authored technical reports. To learn more about the preferences of U.S. aerospace engineers and scientists concerning the format of NASA LaRC-authored technical reports, we surveyed 133 report producers (i.e., authors) and 137 report users in March-April 1996. Questions covered such topics as (1) the order in which report components are read, (2) components used to determine if a report would be read, (3) those components that could be deleted, (4) the placement of such components as the symbols list, (e) the de-sirability of a table of contents, (5) the format of reference citations, (6) column layout and right margin treatment, and (7) and person and voice. Mail (self-reported) surveys were used to collect the data. The response rates for report producers (i.e., authors) was 68% and for users was 62%.

Principles of survey development for telemedicine applications.

Science.gov (United States)

Demiris, George

2006-01-01

Surveys can be used in the evaluation of telemedicine applications but they must be properly designed, consistent and accurate. The purpose of the survey and the resources available will determine the extent of testing that a survey instrument should undergo prior to its use. The validity of an instrument is the correspondence between what is being measured and what was intended to be measured. The reliability of an instrument describes the 'consistency' or 'repeatability' of the measurements made with it. Survey instruments should be designed and tested following basic principles of survey development. The actual survey administration also requires consideration, for example data collection and processing, as well as the interpretation of the findings. Surveys are of two different types. Either they are self-administered, or they are administered by interview. In the latter case, they may be administered by telephone or in a face-to-face meeting. It is important to design a survey instrument based on a detailed definition of what it intends to measure and to test it before administering it to the larger sample.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

Science.gov (United States)

Chang, Liang-Te; And Others

A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

Integrated application of the database for airborne geophysical survey achievement information

International Nuclear Information System (INIS)

Ji Zengxian; Zhang Junwei

2006-01-01

The paper briefly introduces the database of information for airborne geophysical survey achievements. This database was developed on the platform of Microsoft Windows System with the technical methods of Visual C++ 6.0 and MapGIS. It is an information management system concerning airborne geophysical surveying achievements with perfect functions in graphic display, graphic cutting and output, query of data, printing of documents and reports, maintenance of database, etc. All information of airborne geophysical survey achievements in nuclear industry from 1972 to 2003 was embedded in. Based on regional geological map and Meso-Cenozoic basin map, the detailed statistical information of each airborne survey area, each airborne radioactive anomalous point and high field point can be presented visually by combining geological or basin research result. The successful development of this system will provide a fairly good base and platform for management of archives and data of airborne geophysical survey achievements in nuclear industry. (authors)

Application and problems of probability methods in technical safety assessment in the field of nuclear engineering and other technologies

International Nuclear Information System (INIS)

Heuser, F.W.

1980-01-01

On the basis of a deterministic safety concept that has been developed in nuclear engineering, approaches for a probabilistic interpretation of existing safety requirements and for a further risk assessment are described. The procedures in technical reliability analysis and its application in nuclear engineering are discussed. By the example of a reliability analysis for a reactor protection system the author discusses the question as to what extent methods of reliability analysis can be used to interpret deterministically derived safety requirements. The the author gives a survey of the current value and application of probabilistic reliability assessments in non-nuclear technology. The last part of this report deals with methods of risk analysis and its use for safety assessment in nuclear engineering. On the basis of WASH 1,400 the most important phases and tasks of research work in risk assessment are explained, showing the basic criteria and the methods to be applied in risk analysis. (orig./HSCH) [de

A survey of recent applications of TRIGA research reactors

International Nuclear Information System (INIS)

Chesworth, R.H.

1972-01-01

Some relatively recent, somewhat novel, or unusual applications in the United States were surveyed. Several specific applications will be discussed briefly. They are divided into the major areas of nondestructive testing, medical applications, activation analysis, and special testing

Predictors of employer satisfaction: technical and non-technical skills.

Science.gov (United States)

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Technology Survey Assistance Tool Focusing on Their Advantages

Science.gov (United States)

Nishiyama, Risa; Takeuchi, Hironori; Watanabe, Hideo; Nasukawa, Tetsuya

It is important for R&D managers, consultants, and other people seeking broad knowledge in technology fields to survey technical literature such as research papers, white papers, and technology news articles. One of the important kinds of information for those people regards the effectiveness of new technologies in their own businesses. General search engines are good at selecting documents revealing the details of a specific technology or a technology field, but it is hard to obtain useful information about how a technology will apply to individual business cases from such search results. There is a need for a technology survey assistance tool that helps users find technologies with suitable capabilities. In this paper, two technical tasks were tackled to develop the prototype of this assistance tool: Extraction of advantage phrases and scoring for the advantage phrases to find novel applications in the target technology field. We describe a new method to identify advantage phrases in technical documents and our scoring function that gives higher scores to novel applications of the technology. The results of evaluations showed our phrase identification method with only a few phrasal patterns performs almost as well as human annotators, and the proposed scoring conforms better to the decisions made by professionals than random sort.

Technical support document for land application of sewage sludge. Volume 1. Final report

International Nuclear Information System (INIS)

Jones, A.; Beyer, L.; Rookwood, M.; Pacenka, J.; Bergin, J.

1992-11-01

The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the land application of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in land applied sewage sludge. The management practices associated with land application are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through land application are discussed

Quantum control theory and applications: A survey

OpenAIRE

Dong, Daoyi; Petersen, Ian R

2009-01-01

This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and q...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/ where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participa...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the partici...

CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ap...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

Results of the PERI survey of SciDAC applications

International Nuclear Information System (INIS)

Supinski, Bronis R de; Hollingworth, Jeffrey K; Moore, Shirley; Worley, Patrick H

2007-01-01

The Performance Engineering Research Institute (PERI) project focuses on achieving superior performance for Scientific Discovery through Advanced Computing (SciDAC) applications on leadership class machines through cutting-edge research in performance modeling and automated performance tuning. This focus requires coordinated activities to engage SciDAC application teams. The initial application engagement activity was a survey of these teams to determine their performance goals, the criticality of those goals, current performance of their applications, application characteristics relevant to performance and their plans for future optimization. Using a web-based questionnaire, PERI researchers have worked with application developers to provide this information for over twenty-five applications. This paper describes the initial analysis of the application characteristics and performance goals, as well as current and future application engagement activities driven by these results. While the survey was conducted primarily to meet PERI needs, the results represent a snapshot of the state of SciDAC code development and may be of use to the DOE community at large. Overall, the results show that SciDAC application teams are engaged in significant new code development, which will require flexible performance optimization techniques that can improve performance as the applications evolve

Technical aspects of pediatric epilepsy surgery: Report of a multicenter, multinational web-based survey by the ILAE Task Force on Pediatric Epilepsy Surgery.

Science.gov (United States)

Cukiert, Arthur; Rydenhag, Bertil; Harkness, William; Cross, J Helen; Gaillard, William D

2016-02-01

Surgical techniques may vary extensively between centers. We report on a web-based survey aimed at evaluating the current technical approaches in different centers around the world performing epilepsy surgery in children. The intention of the survey was to establish technical standards. A request was made to 88 centers to complete a web-based survey comprising 51 questions. There were 14 questions related to general issues, 13 questions investigating the different technical aspects for children undergoing epilepsy surgery, and 24 questions investigating surgical strategies in pediatric epilepsy surgery. Fifty-two centers covering a wide geographic representation completed the questionnaire. The median number of resective procedures per center per year was 47. Some important technical practices appeared (>80% of the responses) such as the use of prophylactic antibiotics (98%), the use of high-speed drills for bone opening (88%), nonresorbable material for bone flap closure (85%), head fixation (90%), use of the surgical microscope (100%), and of free bone flaps. Other questions, such as the use of drains, electrocorticography (ECoG) and preoperative withdrawal of valproate, led to mixed, inconclusive results. Complications were noted in 3.8% of the patients submitted to cortical resection, 9.9% hemispheric surgery, 5% callosotomy, 1.8% depth electrode implantation, 5.9% subdural grids implantation, 11.9% hypothalamic hamartoma resection, 0.9% vagus nerve stimulation (VNS), and 0.5% deep brain stimulation. There were no major differences across regions or countries in any of the subitems above. The present data offer the first overview of the technical aspects of pediatric epilepsy surgery worldwide. Surprisingly, there seem to be more similarities than differences. That aside many of the evaluated issues should be examined by adequately designed multicenter randomized controlled trials (RCTs). Further knowledge on these technical issues might lead to increased

47 CFR 0.489 - Applications for ship radio inspection and periodical survey.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Applications for ship radio inspection and... Taking Examinations § 0.489 Applications for ship radio inspection and periodical survey. Applications for ship radio inspection or for periodical survey shall be forwarded to the radio district office...

The technical supervision interface

CERN Document Server

Sollander, P

1998-01-01

The Technical Control Room (TCR) is currently using 30 different applications for the remote supervision of the technical infrastructure at CERN. These applications have all been developed with the CERN made Uniform Man Machine Interface (UMMI) tools built in 1990. However, the visualization technology has evolved phenomenally since 1990, the Technical Data Server (TDS) has radically changed our control system architecture, and the standardization and the maintenance of the UMMI applications have become important issues as their number increases. The Technical Supervision Interface is intended to replace the UMMI and solve the above problems. Using a standard WWW-browser for the display, it will be inherently multi-platform and hence available for control room operators, equipment specialists and on-call personnel.

Survey, applications, and prospects of Johnson noise thermometry

International Nuclear Information System (INIS)

Blalock, T.V.; Shepard, R.L.

1981-01-01

Significant progress in the field of Johnson noise thermometry has occurred since the 1971 survey of Kamper. This paper will review the foundation work of Johnson noise thermometry, survey the basic methods which do not utilize quantum devices for noise thermometry for industrial temperatures, and present some applications of noise thermometry in temperature scale metrology and process temperature instrumentation. 35 references

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

International Nuclear Information System (INIS)

2004-01-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information

Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information.

Writing a technical note.

Science.gov (United States)

Ng, K H; Peh, W C G

2010-02-01

A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

Survey on industrial applications of radioactive tracers

International Nuclear Information System (INIS)

Kim, Jae Rok; Yoo, Young Soo; Lee, Jong Doo; Awh, Ok Doo; Kim, Jun Hyung

1986-12-01

Current status and future feasibilities of industrial tracer applications in the Republic of Korea have been surveyed. Microleak detection using Krypton-85 in eight electronics industrial companies, and efficiency tests of steam generators in four nuclear power plants using Sodium-24 are the principal applications in Korea. Future applications are expected for mercury inventory in one soda industrial company, and alkali movement studies in two cement industrial companies. Korean industries expressed deep interest in leak detection in underground pipelines, abrasion/corrosion studies, mixing rate and residence time measurements. (Author)

The US Department of Energy hydrogen baseline survey: assessing knowledge and opinions about hydrogen technology

International Nuclear Information System (INIS)

Christy Cooper; Tykey Truett; R L Schmoyer

2006-01-01

To design and maintain its education program, the United States Department of Energy (DOE) Hydrogen Program conducted a statistically-valid national survey to measure knowledge and opinions of hydrogen among key target audiences. The Hydrogen Baseline Knowledge Survey provides a reference for designing the DOE hydrogen education strategy and will be used in comparisons with future surveys to measure changes in knowledge and opinions over time. The survey sampled four U.S. populations: (1) public; (2) students; (3) state and local government officials; and (4) potential large-scale hydrogen end-users in three business categories. Questions measured technical understanding of hydrogen and opinions about hydrogen safety. Other questions assessed visions of the likelihood of future hydrogen applications and sources of energy information. Several important findings were discovered, including a striking lack of technical understanding across all survey groups, as well as a strong correlation between technical knowledge and opinions about safety: those who demonstrated an understanding of hydrogen technologies expressed the least fear of its safe use. (authors)

PIAAC Technical Standards and Guidelines

Science.gov (United States)

OECD Publishing, 2014

2014-01-01

The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

APPLICATION OF DSM IN OBSTACLE CLEARANCE SURVEYING OF AERODROME

Directory of Open Access Journals (Sweden)

X. Qiao

2016-06-01

Full Text Available Compared to the wide use of digital elevation model (DEM, digital surface model (DSM receives less attention because that it is composed by not only terrain surface, but also vegetations and man-made objects which are usually regarded as useless information. Nevertheless, these objects are useful for the identification of obstacles around an aerodrome. The primary objective of the study was to determine the applicability of DSM in obstacle clearance surveying of aerodrome. According to the requirements of obstacle clearance surveying at QT airport, aerial and satellite imagery were used to generate DSM, by means of photogrammetry, which was spatially analyzed with the hypothetical 3D obstacle limitation surfaces (OLS to identify the potential obstacles. Field surveying was then carried out to retrieve the accurate horizontal position and height of the obstacles. The results proved that the application of DSM could make considerable improvement in the efficiency of obstacle clearance surveying of aerodrome.

Comparison of Responses on the 1994 Biennial Student Survey by the Consumer and Hospitality Services Division and Overall Students of the Milwaukee Area Technical College.

Science.gov (United States)

Advincula-Carpenter, Marietta M.

To gather curriculum planning information, the Research, Planning and Development Division of Milwaukee Area Technical College (MATC) conducts student surveys biennially. Responses of 579 MATC students enrolled in consumer and hospitality services division (CHSD) programs to the 1994 survey were compared with those of the 5,071 students…

Technical Note: On The Usage and Development of the AWAKE Web Server and Web Applications

CERN Document Server

Berger, Dillon Tanner

2017-01-01

The purpose of this technical note is to give a brief explanation of the AWAKE Web Server, the current web applications it serves, and how to edit, maintain, and update the source code. The majority of this paper is dedicated to the development of the server and its web applications.

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort--User Guide. Data Elements B2: Education. Technical Report 49B2

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This technical paper contains information about the variables in the Longitudinal Surveys of Australian Youth (LSAY) Year 95 cohort data set. It groups each variable into data elements that identify common variables within and across waves. Information is provided about each data element, including its purpose, values, base populations and…

Energy. Application of solar energy in dwellings: A technical and economical analysis for the European community

Science.gov (United States)

1980-03-01

The technical possibilities and economical limitations of solar heating systems for the application in swimming pools, hot water preparation, space heating and air conditioning were investigated. This analysis was performed for dwellings with special consideration of the climatic differences in each community. The computer program, which was used for solar system calculations, and all mathematical models, for technical and economical analysis were elucidated. In the technical and economical analysis, the most suitable solar system sizes for each community was determined. Four types of solar collectors were investigated. The single glass selective collector proved to be the most cost effective collector in all the above applications, provided the the additional cost for the selective coating is not more than 20DM/cu. From the results of the analysis certain recommendations were derived, which can improve the rapid implementation of solar heating systems into the market.

Economical and technical feasibility study of some radioisotopes production for medical application

International Nuclear Information System (INIS)

Souza, A.L.A.B. de.

1985-01-01

The economical and technical feasibility study of the production in reactors of some radioisotopes most used in medicine, are presented. The clinical applications of each radioisotope as well as its radioactive concentrations and specific activities are related. Irradiation procedures based in the foregoing data are given. Part of the study is dedicated to quality control. (M.A.C.) [pt

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

Longitudinal Surveys of Australian Youth (LSAY): 1995 Cohort--User Guide. Data Elements B1: Education. Technical Report 49B1

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This technical paper contains information about the variables in the LSAY (Longitudinal Surveys of Australian Youth) Y95 cohort data set. It groups each variable into data elements which identifies common variables within and across waves. Information is provided about each data element including its purpose, values, base populations and relevant.…

Computers in technical information transfer

Energy Technology Data Exchange (ETDEWEB)

Price, C.E.

1978-01-01

The use of computers in transferring scientific and technical information from its creation to its use is surveyed. The traditional publication and distribution processes for S and T literature in past years have been the vehicle for transfer, but computers have altered the process in phenomenal ways. Computers are used in literature publication through text editing and photocomposition applications. Abstracting and indexing services use computers for preparing their products, but the machine-readable document descriptions created for this purpose are input to a rapidly growing computerized information retrieval service industry. Computer use is making many traditional processes passe, and may eventually lead to a largely ''paperless'' information utility.

Application of microearthquake surveys in nuclear power plant siting

International Nuclear Information System (INIS)

1985-06-01

Earthquakes of magnitude less than 3 are generally referred to as microearthquakes. After an overview of the use of microearthquake survey in decisions related to the siting of nuclear power plants, the main aspects of a microearthquake survey network are discussed. The use of microearthquake surveys in investigating problems related to near-field (floating) earthquakes is also discussed. The discussion is centered on the practical application of such a survey leading from objectives and limitations over to planning, instrumentation, operation, maintenance, processing of the data, and interpretation and reporting of the results. An appendix entitled Earthquake Magnitude gives useful background information for definitions of different types of magnitude and their calculation using the records from microearthquake surveys

Survey on Multimedia Technologies for Mobile Learning Applications

Directory of Open Access Journals (Sweden)

Paul POCATILU

2009-01-01

Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

Impact of Global Economic Crisis on Technical and Vocational ...

African Journals Online (AJOL)

The study examined the relationship between global economic crisis (GEC) and inadequacy of facilities for administration of the Technical and. Vocational Education. The descriptive survey design with a random sample of 100 technical teachers from a population of 139 technical teachers in all six Technical Colleges in ...

Research on the Application of Rapid Surveying and Mapping for Large Scare Topographic Map by Uav Aerial Photography System

Science.gov (United States)

Gao, Z.; Song, Y.; Li, C.; Zeng, F.; Wang, F.

2017-08-01

Rapid acquisition and processing method of large scale topographic map data, which relies on the Unmanned Aerial Vehicle (UAV) low-altitude aerial photogrammetry system, is studied in this paper, elaborating the main work flow. Key technologies of UAV photograph mapping is also studied, developing a rapid mapping system based on electronic plate mapping system, thus changing the traditional mapping mode and greatly improving the efficiency of the mapping. Production test and achievement precision evaluation of Digital Orth photo Map (DOM), Digital Line Graphic (DLG) and other digital production were carried out combined with the city basic topographic map update project, which provides a new techniques for large scale rapid surveying and has obvious technical advantage and good application prospect.

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTOs to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Technical Survey on Applications of Wireless Sensor Networks in Nuclear Power Plants

International Nuclear Information System (INIS)

Jiang, Jin; Bari, Ataul; Chen, Dongyi; Hashemian, Hash M.

2014-01-01

Even though there is no general consensus on using wireless technologies in nuclear power plants, potential applications of wireless sensor networks within nuclear power plants (NPPs) has been investigated. The topics of interests include potential interaction of wireless sensor networks with the sensitive protection equipment, radiation damage of the electronics on board sensor nodes, optimal placement of relay nodes that collect and forward data in the network, and possible applications, such as radiation dose and level monitoring, and equipment condition monitoring. Several wireless sensor networks have been deployed on site of NPPs on a trial basis to perform these tasks. Different aspects of deployment of such wireless sensor networks in NPPs have also been examined. Industrial standards or guidelines for deployment of WSNs in NPPs are also been considered. This paper examines the state of the art of wireless sensor networks in NPPs

Technical Survey on Applications of Wireless Sensor Networks in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Jiang, Jin; Bari, Ataul [University of Western Ontario, Ontario (Canada); Chen, Dongyi [University of Electronic Science and Technology of China, Chengdu (China); Hashemian, Hash M. [AMS Technology Center, Knoxville (United States)

2014-08-15

Even though there is no general consensus on using wireless technologies in nuclear power plants, potential applications of wireless sensor networks within nuclear power plants (NPPs) has been investigated. The topics of interests include potential interaction of wireless sensor networks with the sensitive protection equipment, radiation damage of the electronics on board sensor nodes, optimal placement of relay nodes that collect and forward data in the network, and possible applications, such as radiation dose and level monitoring, and equipment condition monitoring. Several wireless sensor networks have been deployed on site of NPPs on a trial basis to perform these tasks. Different aspects of deployment of such wireless sensor networks in NPPs have also been examined. Industrial standards or guidelines for deployment of WSNs in NPPs are also been considered. This paper examines the state of the art of wireless sensor networks in NPPs.

MedlinePlus Connect: Technical Information

Science.gov (United States)

... MedlinePlus Connect → Technical Information URL of this page: https://medlineplus.gov/connect/technical.html MedlinePlus Connect: Technical ... will change.) Old URLs New URLs Web Application https://apps.nlm.nih.gov/medlineplus/services/mpconnect.cfm? ...

Los Alamos Scientific Laboratory x-ray survey manual

International Nuclear Information System (INIS)

Olsher, R.H.

1980-02-01

A manual has been developed by the Health Physics Group to establish procedures for routine testing of industrial and analytical x-ray equipment for compliance with applicable LASL administrative requirements and technical bulletins. Radiation protection survey procedures were developed for the following types of equipment: x-ray diffraction and fluorescence analysis systems, industrial cabinet x-ray systems, industrial noncabinet x-ray systems, and electron microscopes

3.7. Technical and economic aspects of the application of cement concretes obtained from local minerals

International Nuclear Information System (INIS)

Saidov, D.Kh.

2011-01-01

This article is devoted to technical and economic aspects of the application of cement concretes obtained from local minerals. The following composite materials obtained from local raw materials were considered: mineral (cement, lime), inorganic (phosphates, sodium silicate), organic (phenol formaldehyde, epoxide, urea-formaldehyde, carbamide, acryl, organosilicon, furfural aniline). It was concluded that from technical and economical points of view the most effective materials were: mineral composite materials, crude shale oils and ligno sulphonates.

Fiscal 1997 survey report. Survey on the innovative well drilling technology; 1997 nendo chosa hokokusho. Kakushinteki kosei kussaku gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In the geothermal drilling, reduction of the cost of well drilling is an important subject for technical development. The geothermal resource development tends to be made at higher temperatures and at deeper wells. In the present drilling technology, the cost is rising with the exponentially increasing depth and temperature, and there is also occurring the technical limit. Accordingly, the survey clarified the limit of the present drilling technology/cost to point out the research trend of the drilling technology as substitute for the present one, possibilities of the introduction, and the R and D target and subjects. As to latest drilling systems abroad and in Japan, the following were surveyed to study and extract promising technologies and systems: improvement/application of drilling equipment/materials (enhancement of heat resistance of the main drilling equipment, etc., cooling effects of top drive, heat resistance verification of MWD tools, PDM, tricone bits, multi-stage cementing tools, etc.), heightening of drilling rates, trend surveys of slim hole drilling, control drilling, well maintenance/workover, and well design technology. 68 refs., 73 figs., 40 tabs.

Technical endoscopy

International Nuclear Information System (INIS)

Cavalar, K.O.

1988-01-01

A survey is provided on different versions of endoscopes, taking into account the new developments of video endoscopy. With a variety of practical examples it is shown that technical tests using endoscopy are a demanding task for nondestructive testing, whose requirements can only be met on a customized basis. (orig./HP) [de

Nationwide survey of energy conservation in public school districts: Institutional, organizational, and technical characteristics

Energy Technology Data Exchange (ETDEWEB)

Collins, N.E.; Ettinger, G.A.; Gaines, L.L.; Kier, P.H.; Miller, K.L. (Argonne National Lab., IL (United States)); Kammerud, R.C. (Lawrence Berkeley Lab., CA (United States))

1987-09-01

This report summarizes the responses to a mail survey sent to superintendents and other administrators of public school districts. The survey was part of an evaluation project for the USDOE Institutional Conservation Program (ICP). The goal of the project is to identify the most successful energy conservation measures (equipment and activities) available to the institutional buildings sector. To accomplish this goal, four specific research objectives were defined: To determine the impact of the ICP grants program on fostering energy efficiency and saving energy; to determine key characteristics of institutional conservation efforts outside the federal program; To determine the technical, organizational, and Institutional conditions that create the opportunity for energy conservation measures (ECMS) to be most effective; and to identify key technology transfer opportunities. This report focuses on those characteristics of school districts (and the schools within those districts) that might influence the identification, implementation, operation, and impacts of institutional energy conservation efforts. Information about institutional characteristics was gathered through a mail survey of public school districts and private schools. The first mailing resulted in responses from 90 of the 823 public school districts selected through a combination cluster-and-stratification sampling technique and 64 of the 1,700 private schools selected as a stratified random sample. Remaining project resources were used to collect data to achieve a statistically sound sample of a total of 250 public school districts by telephone interviews. In doing so, some questions had to be dropped. Responses from both the mall surveys and the telephone interviews of public school districts were combined into one data set. This report describes results for all 250 districts.

Science-practice nexus for landslide surveying: technical training for local government units in Indonesia

Science.gov (United States)

Alam, A. L.; Hespiantoro, S.; Dyar, D.; Balzer, D.; Kuhn, D.; Torizin, J.; Fuchs, M.; Kastl, S.; Anhorn, J.

2017-02-01

The Indonesian archipelago is prone to various geological hazards on an almost day to day basis. In order to mitigate disaster risk and reduce losses, the government uses its unique setup of ministerial training institutions. The Centre for Development of Human Resources in Geology, Mineral and Coal offers different level of technical training to local governments in order to provide them with the necessary means to understand geological hazards, mitigate risks, and hence close the gap between local and national governments. One key factor has been the continuous incorporation of new scientific knowledge into their training curricula. The paper presents benefits and challenges of this science-practice nexus using the standardised landslide survey as one example where mobile technology has been introduced to the training just recently.

Probabilistic Structural Analysis Methods for select space propulsion system components (PSAM). Volume 3: Literature surveys and technical reports

Science.gov (United States)

1992-01-01

The technical effort and computer code developed during the first year are summarized. Several formulations for Probabilistic Finite Element Analysis (PFEA) are described with emphasis on the selected formulation. The strategies being implemented in the first-version computer code to perform linear, elastic PFEA is described. The results of a series of select Space Shuttle Main Engine (SSME) component surveys are presented. These results identify the critical components and provide the information necessary for probabilistic structural analysis.

Development of the standard classification system of technical information in the field of RI-biomics and its application to the web system

International Nuclear Information System (INIS)

Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin

2014-01-01

RI-Biomics is a new concept that combines radioisotopes (RI) and Biomics. For efficient collection of information, establishment of database for technical information system and its application to the system, there is an increasing need for constructing the standard classification system of technical information by its systematical classification. In this paper, we have summarized the development process of the standard classification system of technical information in the field of RI-Biomics and its application to the system. Constructing the draft version for the standard classification system of technical information was based on that standard classification one in national science and technology in Korea. The final classification system was then derived through the reconstruction and the feedback process based on the consultation from the 7 experts. These results were applied to the database of technical information system after transforming as standard code. Thus, the standard classification system were composed of 5 large classifications and 20 small classifications, and those classification are expected to establish the foundation of information system by achieving the circular structure of collection-analysis-application of information

TECHNICAL EFFICIENCY AND TECHNICAL LEVEL INDICATORS APPLICATION FOR CIVIL AIRCRAFT FUNCTIONAL PROPERTIES ANALYSIS

Directory of Open Access Journals (Sweden)

Vadim V. Efimov

2018-01-01

Full Text Available Functional properties characterize the purpose of the aircraft and are described by its flight performance characteristics such as range and cruising speed, payload, runway characteristics, etc. Functional properties also characterize the aircraft efficiency that determines the objective need for their analysis by both aircraft designers and operators in conditions of permanent and systematic efficiency increase necessity. When choosing the aircraft, it is important for the operator to make sure that a selected aircraft type has a high level of functional properties, which will allow it to provide high operational efficiency without obsolescence in the long term. However, when choosing from several aircraft types the operator has to face the fact that some characteristics of considered aircraft variants are better and the others are worse that does not allow to definitely determine what aircraft type has a higher level of functional properties.The possibility of applying technical efficiency indicators and a generalized technical level indicator for analyzing the functional properties of civil aviation aircraft is explored in this article. Fuel, weight and target efficiency values as well as the previously improved technical level indicator value were calculated for the different generations and modifications of Boeing 737 and Airbus A320 families of medium-range airplanes, which was followed by the results interpretation within one airplane generation and when moving historically from one airplane generation to another. According to analysis results it is concluded that it is impossible to define the change of the aircraft functional properties level by the change in the values of separate technical efficiency indicators. Thus, it is proposed to use a generalized technical level indicator that determines the level of aircraft technical perfection for purpose and to use efficiency indicators to analyze the cost of providing this level of

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

Strategije održavanja tehničkih sistema / Technical system maintenance strategies

Directory of Open Access Journals (Sweden)

Petar Stanojević

2003-11-01

Full Text Available U ovom radu dat je pregled novih naučnih saznanja koja su dovela do promena u sadržaju strategija koje se mogu primeniti u sistemu održavanja tehničkih sistema. Analizirana je suština relevantnih strategija održavanja, prednosti nedostatci i efekti koje nosi njihova primena. / This paper gives a survey of recent scientific achievements which has brought changes into the strategies applicable in technical system maintenance systems. The essence of relevant maintenance strategies has been analyzed as well as the advantages disadvantages and effects of their application.

76 FR 45589 - Notice of Submission of Proposed Information Collection to OMB; Application for Technical...

Science.gov (United States)

2011-07-29

... grantees will engage providers to supply expertise to shape their resources into effective, coordinated...: Application for technical assistance funds with which CPD grantees will engage providers to supply expertise to shape their resources into effective, coordinated, neighborhood and community development...

A Survey of Blue-Noise Sampling and Its Applications

KAUST Repository

Yan, Dongming; Guo, Jian-Wei; Wang, Bin; Zhang, Xiao-Peng; Wonka, Peter

2015-01-01

In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

A Survey of Blue-Noise Sampling and Its Applications

KAUST Repository

Yan, Dongming

2015-05-05

In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

Technical aspects of portal technology application for e-health systems.

Science.gov (United States)

Kosińska, Joanna; Słowikowski, Paweł

2004-01-01

E-health is an emerging field on the intersection of medical information technologies, public health and business, referring to health services and information delivered or enhanced through the Internet and related technologies. Portal technology, allowing services to be accessible over the Internet is a perfect tool for providing e-health services. The use of portal technologies has had deep influence on the architecture of the whole e-health system, both regarding new subsystems and older ones which we want to integrate with the portal. Portals provide new possibilities for creating novel types of e-health applications as well. In this paper we provide a brief overview of e-health systems and portal technologies, and present many technical aspects of portal technology application for e-health systems such as the architecture of portal-based e-health systems, graphical user interfaces, access to various e-health systems' resources, personalization, security and privacy.

Overcoming technical and market barriers for distributed wind applications : reaching the mainstream

International Nuclear Information System (INIS)

Rhoads-Weaver, H.; Forsyth, T.

2006-01-01

Technical and market barriers for distributed wind applications were reviewed. A renewable energy survey has recently suggested that while less than 10 per cent of survey respondents had installed wind turbines, 40 per cent indicated that they plan to use wind energy on-site in the future. It is estimated that global annual sales of wind systems have the potential to reach $110 million by 2010 under ideal conditions. Distributed wind market growth areas include residential grid-connected sites, schools, public facilities and farms, business and industry. Grid-connected wind projects are expected to grow from less than 5 per cent of the total small wind market to over 20 per cent by 2020. However, without a federal investment tax credit, more modest growth is anticipated. Drivers of the distributed wind market were identified as financial incentives and programs; favorable policies and regulations; and increasing retail electricity rates and loads. Challenges and barriers to distributed wind market growth included economics; lack of performance standards and ratings; difficult interconnection processes; prohibitive zoning rules; low manufacturing volumes; and low consumer awareness. While there has been a 5-fold increase in photovoltaics (PV) sales in the United States since 2000, small wind turbines sales have only grown by approximately 70 per cent over the same period. Market increases in distributed wind systems are anticipated with the introduction of hybrid wind/PV systems. Improved designs for small and mid-sized turbines, rotors and towers may help to overcome barriers to wind energy growth. Technology developments in remote-monitored controllers and improved computer tools for analyzing project economics may also help to overcome market barriers. However, significant cost reductions are needed to stimulate widespread market acceptance of distributed wind. It was concluded that distributed wind is well-positioned to play an important role in supplying clean

Optical coherence tomography angiography: Technical principles and clinical applications in ophthalmology

Directory of Open Access Journals (Sweden)

Ahmed M Hagag

2017-01-01

Full Text Available Optical coherence tomography angiography (OCTA is a functional extension of OCT that provides information on retinal and choroidal circulations without the need for dye injections. With the recent development of high-speed OCT systems and efficient algorithms, OCTA has become clinically feasible. In this review article, we discuss the technical principles of OCTA, including image processing and artifacts, and its clinical applications in ophthalmology. We summarize recent studies which qualitatively or quantitatively assess disease presentation, progression, and/or response to treatment.

Sandia Transportation Technical Environmental Information Center and its application to transportation risk analyses

International Nuclear Information System (INIS)

Foley, J.T.; Davidson, C.A.; McClure, J.D.

1978-01-01

Purpose of this paper is to describe an applied research activity which is fundamental to the conduct of transportation analyses: the collection, analysis, storage, and retrieval of information on the intensities of technical environments. This paper describes the collection system which provides such a service to official researchers in transportation analysis and the applications of this information in the area of risk analysis

78 FR 15008 - Applications for New Awards; Native American Career and Technical Education Program (NACTEP...

Science.gov (United States)

2013-03-08

... DEPARTMENT OF EDUCATION Applications for New Awards; Native American Career and Technical Education Program (NACTEP); Correction AGENCY: Office of Vocational and Adult Education, Department of... the Code of Federal Regulations is available via the Federal Digital System at: www.gpo.gov/fdsys . At...

Technical Report Writing Today

DEFF Research Database (Denmark)

Riordan, Daniel G.

2014-01-01

Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

Science.gov (United States)

Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

2016-06-01

Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p technical performance of laparoscopic rectal surgery.

A Survey of Progress in Coding Theory in the Soviet Union. Final Report.

Science.gov (United States)

Kautz, William H.; Levitt, Karl N.

The results of a comprehensive technical survey of all published Soviet literature in coding theory and its applications--over 400 papers and books appearing before March 1967--are described in this report. Noteworthy Soviet contributions are discussed, including codes for the noiseless channel, codes that correct asymetric errors, decoding for…

Evaluation Study of VTAE Wood Technics Programs.

Science.gov (United States)

Wisconsin State Board of Vocational, Technical, and Adult Education, Madison.

A survey of former students of the Wisconsin Vocational, Technical, and Adult Education (VTAE) wood technics programs and employers in woodworking industries was conducted during spring of 1985. General objectives were to determine job classifications, types of businesses, and relative importance of tasks or duties in various woodworking-related…

78 FR 38304 - Applications for New Awards; Native Hawaiian Career and Technical Education Program (NHCTEP...

Science.gov (United States)

2013-06-26

... DEPARTMENT OF EDUCATION Applications for New Awards; Native Hawaiian Career and Technical Education Program (NHCTEP); Correction Catalog of Federal Domestic Assistance (CFDA), Number: 84.259A... Register and the Code of Federal Regulations is available via the Federal Digital System at: www.gpo.gov...

Information support of monitoring of technical condition of buildings in construction risk area

Science.gov (United States)

Skachkova, M. E.; Lepihina, O. Y.; Ignatova, V. V.

2018-05-01

The paper presents the results of the research devoted to the development of a model of information support of monitoring buildings technical condition; these buildings are located in the construction risk area. As a result of the visual and instrumental survey, as well as the analysis of existing approaches and techniques, attributive and cartographic databases have been created. These databases allow monitoring defects and damages of buildings located in a 30-meter risk area from the object under construction. The classification of structures and defects of these buildings under survey is presented. The functional capabilities of the developed model and the field of it practical applications are determined.

Research and application of soil-mercury-surveys method for locating uranium

International Nuclear Information System (INIS)

You Yunfei; Lu Shili; Jiao Zongrun

1995-06-01

Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

Online Learning for Mobile Technology Applications in Health Surveys

International Development Research Centre (IDRC) Digital Library (Canada)

Online Learning for Mobile Technology Applications in Health Surveys. In light of ... to develop a globally accessible asynchronous Internet-based training packaged backed by a real-time coaching service. Project ID. 105932. Project status.

The Sloan Digital Sky Survey-II Supernova Survey: Technical Summary

Energy Technology Data Exchange (ETDEWEB)

Frieman, Joshua A.; /Fermilab /KICP, Chicago /Chicago U., Astron. Astrophys. Ctr.; Bassett, Bruce; /Cape Town U. /South African Astron. Observ.; Becker, Andrew; /Washington; Choi, Changsu; /Seoul Natl. U.; Cinabro, David; /Wayne State U.; DeJongh, Don Frederic; /Fermilab; Depoy, Darren L.; /Ohio State U.; Doi, Mamoru; /Tokyo U.; Garnavich, Peter M.; /Notre Dame U.; Hogan, Craig J.; /Washington U., Seattle, Astron. Dept.; Holtzman, Jon; /New Mexico State U.; Im, Myungshin; /Seoul Natl. U.; Jha, Saurabh; /Stanford U., Phys. Dept.; Konishi, Kohki; /Tokyo U.; Lampeitl, Hubert; /Baltimore, Space Telescope Sci.; Marriner, John; /Fermilab; Marshall, Jennifer L.; /Ohio State U.; McGinnis,; /Fermilab; Miknaitis, Gajus; /Fermilab; Nichol, Robert C.; /Portsmouth U.; Prieto, Jose Luis; /Ohio State U. /Rochester Inst. Tech. /Stanford U., Phys. Dept. /Pennsylvania U.

2007-09-14

The Sloan Digital Sky Survey-II (SDSS-II) has embarked on a multi-year project to identify and measure light curves for intermediate-redshift (0.05 < z < 0.35) Type Ia supernovae (SNe Ia) using repeated five-band (ugriz) imaging over an area of 300 sq. deg. The survey region is a stripe 2.5 degrees wide centered on the celestial equator in the Southern Galactic Cap that has been imaged numerous times in earlier years, enabling construction of a deep reference image for discovery of new objects. Supernova imaging observations are being acquired between 1 September and 30 November of 2005-7. During the first two seasons, each region was imaged on average every five nights. Spectroscopic follow-up observations to determine supernova type and redshift are carried out on a large number of telescopes. In its first two three-month seasons, the survey has discovered and measured light curves for 327 spectroscopically confirmed SNe Ia, 30 probable SNe Ia, 14 confirmed SNe Ib/c, 32 confirmed SNe II, plus a large number of photometrically identified SNe Ia, 94 of which have host-galaxy spectra taken so far. This paper provides an overview of the project and briefly describes the observations completed during the first two seasons of operation.

Survey of potential applications of superconducting suspensions

International Nuclear Information System (INIS)

Rao, D.K.; Bupara, S.S.

1993-01-01

The purpose of this report is to survey the recent developments in applying the bulk superconductors to mechanical applications. These applications, called superconducting suspensions, can be broadly divided into three groups - Passive Magnetic Bearings, Passive Superconducting Dampers and Active Superconducting Bearings. Basically, passive magnetic bearings utilize bulk superconductors to support a rotating shaft without contact while active superconducting bearings employ superconducting wires. Passive superconducting dampers, on the other hand, dissipate energy from a vibrating component. Over the past one year, dramatic improvements have been made in processing large-size specimens made of high grade bulk superconductors. As a result, they can meet the size requirements and load capacity requirements of many applications. With this size-scale up, one can utilize them in a wider number of applications than what was possible a few years back. At present several organizations have demonstrated the capability of passive magnetic bearings. The targeted applications include miniature cryoturboexpanders, cryoturbopumps, energy storage wheels and turbomolecular pumps. These demonstrations indicate that the passive magnetic bearings are closer to technology maturity. (orig.)

Comparison of Satellite Surveying to Traditional Surveying Methods for the Resources Industry

Science.gov (United States)

Osborne, B. P.; Osborne, V. J.; Kruger, M. L.

Modern ground-based survey methods involve detailed survey, which provides three-space co-ordinates for surveyed points, to a high level of accuracy. The instruments are operated by surveyors, who process the raw results to create survey location maps for the subject of the survey. Such surveys are conducted for a location or region and referenced to the earth global co- ordinate system with global positioning system (GPS) positioning. Due to this referencing the survey is only as accurate as the GPS reference system. Satellite survey remote sensing utilise satellite imagery which have been processed using commercial geographic information system software. Three-space co-ordinate maps are generated, with an accuracy determined by the datum position accuracy and optical resolution of the satellite platform.This paper presents a case study, which compares topographic surveying undertaken by traditional survey methods with satellite surveying, for the same location. The purpose of this study is to assess the viability of satellite remote sensing for surveying in the resources industry. The case study involves a topographic survey of a dune field for a prospective mining project area in Pakistan. This site has been surveyed using modern surveying techniques and the results are compared to a satellite survey performed on the same area.Analysis of the results from traditional survey and from the satellite survey involved a comparison of the derived spatial co- ordinates from each method. In addition, comparisons have been made of costs and turnaround time for both methods.The results of this application of remote sensing is of particular interest for survey in areas with remote and extreme environments, weather extremes, political unrest, poor travel links, which are commonly associated with mining projects. Such areas frequently suffer language barriers, poor onsite technical support and resources.

30 CFR 777.13 - Reporting of technical data.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reporting of technical data. 777.13 Section 777... PROGRAMS GENERAL CONTENT REQUIREMENTS FOR PERMIT APPLICATIONS § 777.13 Reporting of technical data. (a) All technical data submitted in the application shall be accompanied by the names of persons or organizations...

Artificial intelligence applications in space and SDI: A survey

Science.gov (United States)

Fiala, Harvey E.

1988-01-01

The purpose of this paper is to survey existing and planned Artificial Intelligence (AI) applications to show that they are sufficiently advanced for 32 percent of all space applications and SDI (Space Defense Initiative) software to be AI-based software. To best define the needs that AI can fill in space and SDI programs, this paper enumerates primary areas of research and lists generic application areas. Current and planned NASA and military space projects in AI will be reviewed. This review will be largely in the selected area of expert systems. Finally, direct applications of AI to SDI will be treated. The conclusion covers the importance of AI to space and SDI applications, and conversely, their importance to AI.

Analysis of the prevailing standard and technical documents for their applicability under conditions of the 'Ukrytie' operation and technical proposals relating to the elaboration of new ones concerning fire safety

International Nuclear Information System (INIS)

Nazarenko, B.S.; Emets, V.G.

1998-01-01

An analysis of the prevailing laws and standards and technical documents (STD) to ensure safe operation of nuclear power installations, with requirements of nuclear, radiation and fire safety taken into account, has been performed. Proposals on application of some items of prevailing STD under conditions of the 'Ukrytie' operation are presented. Also given are technical proposals on correction of the prevailing operational standard documents and elaboration of special STD

Survey of potential electronic applications of high temperature superconductors

International Nuclear Information System (INIS)

Hammond, R.B.; Bourne, L.C.

1991-01-01

In this paper the authors present a survey of the potential electronic applications of high temperature superconductor (HTSC) thin films. During the past four years there has been substantial speculation on this topic. The authors will cover only a small fraction of the potential electronic applications that have been identified. Their treatment is influenced by the developments over the past few years in materials and device development and in market analysis. They present their view of the most promising potential applications. Superconductors have two important properties that make them attractive for electronic applications. These are (a) low surface resistance at high frequencies, and (b) the Josephson effect

Recent Trends in Veteran Unemployment as Measured in the Current Population Survey and the American Community Survey

National Research Council Canada - National Science Library

Savych, Bogdan; Klerman, Jacob A; Loughran, David S

2008-01-01

This technical report explores recent trends in the unemployment of recent veterans as estimated from two nationally representative surveys, the Current Population Survey "CPS" and the American Community Survey "ACS...

Radiological survey and decontamination of the former main technical area (TA-1) at Los Alamos, New Mexico

International Nuclear Information System (INIS)

Ahlquist, A.J.; Stoker, A.K.; Trocki, L.K.

1977-12-01

A radiological survey was conducted on the undeveloped portions of the site of the former Main Technical Area (TA-1) of the Los Alamos Scientific Laboratory in north-central New Mexico. Between 1943 and 1965, research work on nuclear weapons was carried out in TA-1. The area was decontaminated and demolished in stages, and beginning in 1966 the land was given to Los Alamos County or sold to private interests. The survey disclosed traces of radioactive contamination undetected or considered insignificant during original demolition in the 1950s and 1960s. The remaining contamination was removed in 1975 and 1976 to levels considered to pose no health or safety hazards and, further, to the lowest levels considered practicable. Methods used in the survey included measurement techniques for detecting alpha emitters such as uranium and plutonium, extensive surface and subsurface soil sampling, and use of conventional health physics instrumentation to provide detailed information on approximately 16 hectares (40 acres) of land. As a result of the decontamination efforts, approximately 15,000 m 3 of contaminated or potentially contaminated material was removed to an approved radioactive waste disposal site on ERDA property. Full details of the methods, findings, decision criteria, and as-left conditions are documented

Co-evolution of intelligent socio-technical systems modelling and applications in large scale emergency and transport domains

CERN Document Server

2013-01-01

As the interconnectivity between humans through technical devices is becoming ubiquitous, the next step is already in the making: ambient intelligence, i.e. smart (technical) environments, which will eventually play the same active role in communication as the human players, leading to a co-evolution in all domains where real-time communication is essential. This topical volume, based on the findings of the Socionical European research project, gives equal attention to two highly relevant domains of applications: transport, specifically traffic, dynamics from the viewpoint of a socio-technical interaction and evacuation scenarios for large-scale emergency situations. Care was taken to investigate as much as possible the limits of scalability and to combine the modeling using complex systems science approaches with relevant data analysis.

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide Vitè

2002-01-01

Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

Mobile Application Testing in Pakistan: A Survey

Directory of Open Access Journals (Sweden)

Muhammad Saqib

2017-12-01

Full Text Available Research regarding MAT (Mobile Application Testing in Pakistan is hard to discover and to the best of our knowledge, no work has been done in surveying MAT in Pakistan. In this work, we have examined the current trend and status of MAT in Pakistan. Main objective was to investigate to what extent MAT is currently applied in Pakistan software companies and what experience the companies have with using MAT. Furthermore, efforts were made to find out what testers think about MAT, e.g. issue, advantages and disadvantages of MAT, what factors affects MAT and how they plan to improve MAT. In order to achieve our objectives, we used a comprehensive online survey so we converted our research questions into correspondence survey questions. We served a questionnaire of the survey to 66 testing relevant officials of leading software companies in different cities of Pakistan to develop a model study about general trend and status of MAT which can be generalized all over Pakistan. We received 56 replies in total after over 2 months. After that, we used SPSS tool to analyze the replies of this questionnaire. Cross-Tabulation Analysis and Pearson Chi-square tests have been computed to examine the results. We found some interesting results on current status and practice of MAT in Pakistan software companies.

TRANSLATING SERVICE TECHNICAL PROSE

African Journals Online (AJOL)

language. The Application of Technical Service. Prose. To form a good idea of the appl ication .... cost lives. In this particular domain, translators must have a sound technical ... These semantic ... another language and often, in doing so, changing its meaning. The words ..... He will hand out tasks to each translator and after.

Application of gamma spectrometry survey and discussion on data processing

International Nuclear Information System (INIS)

Li Ji'an; He Jianguo

2008-01-01

This paper analyzed and discussed the different opinions about the measured parameters of gamma spectrometry data, introduced the effect of gamma spectrometry survey to the search for sandstone type uranium deposit. The author believes that it is very necessary to perform some ground gamma spectrometry survey and enforce the development and application of airborne radiometric data so as to carry out the role of gamma spectrometry in the exploration of sandstone type uranium deposit. (authors)

A survey on the VXIbus and validity analyses for instrumentation and control in NPPs

International Nuclear Information System (INIS)

Kwon, Kee Choon; Park, Won Man

1997-06-01

This document presents the technical status of the VXIbus system and its interface. VMEbus, while developed as a backplane for Motorola processors, can be used for data acquisition, control and other instrumentation applications. The VXIbus and its associated standard for form, fit, and electrical interface have simplified the process of putting together automated instrumentation systems. The VXIplug and play system alliance was founded in 1993, the alliance's charter to improve the effectiveness of VXI-based solutions by increasing ease-of-use and improving the interoperability of mainframes, computers, instrumentations, and software through open, multivendor standards and practices. This technical report surveys surveys the instrumentation and control in NPPs apply to the VXI-based instruments which are studied expendability, interoperability, maintainability and other features. (author). 10 refs., 4 tabs., 25 figs

Development and Evaluation the Satisfaction of Using an Oral Health Survey Mobile Application.

Science.gov (United States)

Detsomboonrat, Palinee; Pisarnturakit, Pagaporn Pantuwadee

2018-06-05

Surveying oral health at the community level should be done at regular intervals. Dental health personnel must assess the oral health status and needs of the community through the collection and interpretation of reliable health information. Thus, the aims of this study were (1) to develop a mobile application for oral health surveys, (2) to analyze the oral status of school children in Bangkok using the newly developed application, and (3) to evaluate user satisfaction with using the Oral Health Survey Mobile Application (OHSMA). The OHSMA Android app was created to facilitate the collection and transfer of oral health status data. The survey data on the oral health status of Grades 1-6 Thai schoolchildren were collected and analyzed using the OHSMA. A 5-point Likert scale questionnaire was used to evaluate the satisfaction of 125 dental students when using this new application compared with using paper forms. The prevalence of dental caries in 441 schoolchildren was 79.7%. The total mean decayed, missing, and filled for primary teeth (dmft) and decayed, missing, and filled for permanent teeth (DMFT) were 4.09 (d + D = 3.29, m + M = 0.15, and f + F = 0.65). Users indicated high satisfaction scores for three OHSMA features: font, color, and proper size. The results showed that paper forms were easier for inputting and recording the data compared with the OHSMA. However, the OHSMA was significantly easier for searching data and reporting data compared with paper forms (OHSMA 3.80, paper forms 3.35; p application has the potential to collect valuable oral health survey data.

Cloud computing for energy management in smart grid - an application survey

International Nuclear Information System (INIS)

Naveen, P; Ing, Wong Kiing; Danquah, Michael Kobina; Sidhu, Amandeep S; Abu-Siada, Ahmed

2016-01-01

The smart grid is the emerging energy system wherein the application of information technology, tools and techniques that make the grid run more efficiently. It possesses demand response capacity to help balance electrical consumption with supply. The challenges and opportunities of emerging and future smart grids can be addressed by cloud computing. To focus on these requirements, we provide an in-depth survey on different cloud computing applications for energy management in the smart grid architecture. In this survey, we present an outline of the current state of research on smart grid development. We also propose a model of cloud based economic power dispatch for smart grid. (paper)

25 CFR 41.10 - Technical assistance.

Science.gov (United States)

2010-04-01

... Community College's request in writing. In any case, where the type and source of technical assistance is... for technical assistance under this section shall be made in writing and sent to the applicant within... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance. 41.10 Section 41.10 Indians BUREAU...

Report on the IAEA technical meeting on application libraries for ADS and transmutation

International Nuclear Information System (INIS)

Stanculescu, S.; Trkov, A.

2004-12-01

Highlights of the technical meeting are given with respect to the source of evaluated nuclear data, codes for ADS analysis with associated application libraries, content of these libraries, and the procedure for producing them. Participants debated their requirements and formulated an action plan, with work divided between four sub-groups: review/analysis of ADS benchmarks; selection of evaluated nuclear data files; preparation of the cross-section libraries; and benchmarking. Specific tasks were assigned with deadlines. (author)

DEVELOPMENT AND APPLICATION OF THE KEY TECHNOLOGIES FOR THE QUALITY CONTROL AND INSPECTION OF NATIONAL GEOGRAPHICAL CONDITIONS SURVEY PRODUCTS

Directory of Open Access Journals (Sweden)

Y. Zhao

2018-04-01

Full Text Available The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth’s surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of “five-in-one” quality control that is constituted by “quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions” by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

Development and Application of the Key Technologies for the Quality Control and Inspection of National Geographical Conditions Survey Products

Science.gov (United States)

Zhao, Y.; Zhang, L.; Ma, W.; Zhang, P.; Zhao, T.

2018-04-01

The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth's surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of "five-in-one" quality control that is constituted by "quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions" by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

Technical training: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining Contact: Technical.Training@cern.ch or your DTO to find out more information.

Introduction into thermodynamics. From elements to technical applications. 12. rev. ed.

International Nuclear Information System (INIS)

Cerbe, G.; Hoffmann, H.J.

1999-01-01

This textbook has been proved for more than 30 years and has been regularly revised and updated. Thus, recent developments in energy conversion and environmental protection have constantly been taken into account. Tabulated values and standards reflect the current state of things. The book's basic concept was maintained without change from the first to the twelfth edition: leading over from well-founded thermodynamic theory to technical applications, closeness to practice because of many examples with solutions and tasks with solution results, the opportunity for self-study with 124 examples, 132 tasks and 170 control questions with answers, and high usability because of many tables and direct-information diagrams. (orig.) [de

PISA 2012 Technical Report

Science.gov (United States)

OECD Publishing, 2014

2014-01-01

The "PISA 2012 Technical Report" describes the methodology underlying the PISA 2012 survey, which tested 15-year-olds' competencies in mathematics, reading and science and, in some countries, problem solving and financial literacy. It examines the design and implementation of the project at a level of detail that allows researchers to…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 21: Technological innovation and technical communications: Their place in aerospace engineering curricula. A survey of European, Japanese, and US Aerospace Engineers and Scientists

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Holland, Maurita Peterson; Keene, Michael L.; Kennedy, John M.

1991-01-01

Aerospace engineers and scientists from Western Europe, Japan, and the United States were surveyed as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Questionnaires were used to solicit their opinions regarding the following: (1) the importance of technical communications to their profession; (2) the use and production of technical communications; and (3) their views about the appropriate content of an undergraduate course in technical communications. The ability to communicate technical information effectively was very important to the aerospace engineers and scientists who participated in the study. A considerable portion of their working week is devoted to using and producing technical information. The types of technical communications used and produced varied within and among the three groups. The type of technical communication product used and produced appears to be related to respondents' professional duties. Respondents from the three groups made similar recommendations regarding the principles, mechanics, and on-the-job communications to be included in an undergraduate technical communications course for aerospace majors.

Modeling technical efficiency of inshore fishery using data envelopment analysis

Science.gov (United States)

Rahman, Rahayu; Zahid, Zalina; Khairi, Siti Shaliza Mohd; Hussin, Siti Aida Sheikh

2016-10-01

Fishery industry contributes significantly to the economy of Malaysia. This study utilized Data Envelopment Analysis application in estimating the technical efficiency of fishery in Terengganu, a state on the eastern coast of Peninsular Malaysia, based on multiple output, i.e. total fish landing and income of fishermen with six inputs, i.e. engine power, vessel size, number of trips, number of workers, cost and operation distance. The data were collected by survey conducted between November and December 2014. The decision making units (DMUs) involved 100 fishermen from 10 fishery areas. The result showed that the technical efficiency in Season I (dry season) and Season II (rainy season) were 90.2% and 66.7% respectively. About 27% of the fishermen were rated to be efficient during Season I, meanwhile only 13% of the fishermen achieved full efficiency 100% during Season II. The results also found out that there was a significance difference in the efficiency performance between the fishery areas.

PISA 2009 Technical Report

Science.gov (United States)

OECD Publishing (NJ1), 2012

2012-01-01

The "PISA 2009 Technical Report" describes the methodology underlying the PISA 2009 survey. It examines additional features related to the implementation of the project at a level of detail that allows researchers to understand and replicate its analyses. The reader will find a wealth of information on the test and sample design,…

Technical Analysis in Foreign Exchange - The Workhorse Gains Further Ground

OpenAIRE

Gehrig, Thomas; Menkhoff, Lukas

2003-01-01

This work extends earlier survey studies on the use of technical analysis by considering flow analysis as a third form of information production. Moreover the survey covers FX dealers and also the rising fund managers. Technical analysis has gained importance over time and is now the most equally spread kind of analysis. It has by far the greatest importance in FX dealing and is second in fund management. Charts are used for shorter-term forecasting horizons while flows dominate at the shorte...

Current trends in context-aware applications

Directory of Open Access Journals (Sweden)

Andrea Loayza

2013-12-01

Full Text Available (Received: 2013/10/07 - Accepted: 2013/12/10Context-aware applications adapt their behavior and settings according to the environment conditions and to the user preferences. This state-of-the-art survey identifies the current trends related to the technics and tools for the development of this kind of software, as well as the areas of interest of the scientific community on the subject. It stands out the research on multimodal interfaces, localization, activity detection, interruptions control, predictive and wellbeing applications.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 26: The technical communication practices of aerospace engineering students: Results of the phase 3 AIAA National Student Survey

Science.gov (United States)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of aerospace engineering students. The reported data were obtained from a survey of student members of the American Institute of Aeronautics and Astronautics (AIAA). The survey was undertaken as a phase 3 activity of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance; use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

CERN Technical Training 2006 - WBTechT offers online training

CERN Multimedia

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining, and contact technical.training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

CERN Technical Training 2006: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

CERN Technical Training 2006: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

Technical and economic feasibility of thermal energy storage. Thermal energy storage application to the brick/ceramic industry. Final report

Energy Technology Data Exchange (ETDEWEB)

Glenn, D.R.

1976-10-01

An initial project to study the technical and economic feasibility of thermal energy storage (TES) in the three major consumer markets, namely, the residential, commercial and industrial sectors is described. A major objective of the study was to identify viable TES applications from which a more concise study could be launched, leading to a conceptual design and in-depth validation of the TES energy impacts. This report documents one such program. The brick/ceramic industries commonly use periodic kilns which by their operating cycle require time-variant energy supply and consequently variable heat rejection. This application was one of the numerous TES opportunities that emerged from the first study, now available from the ERDA Technical Information Center, Oak Ridge, Tennessee, identified as Report No. COO-2558-1.

Photovoltaic electricity industry and markets Status and trends in France 1992-2002 - Technical report. Survey report of photovoltaic power applications in France 2002

International Nuclear Information System (INIS)

Claverie, Andre; Juquois, Fabrice

2003-01-01

The report provides a picture of the photovoltaic industry and its applications in France covering the years 1992 to end 2002. The main stream of photovoltaic (PV) activity in France is that of off-grid power systems. Nevertheless, the ADEME and other public authority partners decided in 1999 to contribute to the funding of grid-connected distributed photovoltaic power systems. During the year 2002, 3,4 MW of photovoltaic power systems were installed in France and its overseas departments. The annual off-grid PV power system market remains stable at around 2,4 MW per year and that of grid-connected distributed power systems reached almost 1 MW in 2002. The total cumulative installed PV power in France is 17 MW of which 15 MW are off-grid systems and 2 MW are grid-connected distributed PV power systems. This installed capacity represents the annual production of 15 GWh of electricity. The PV cell/module industry remains very active. The annual production of photovoltaic multi-crystalline silicon cells increased by 25 % during the year 2002 to reach 17 MW while the production of amorphous silicon thin film modules increased slightly to go over half a megawatt. Two French companies started introducing on the market photovoltaic modules specifically designed for building integration. Price of photovoltaic power systems is decreasing towards 20 euros per watt for off-grid systems under public funding and turnkey prices for grid-connected distributed PV power systems vary from 6 to 8 euros per watt according to the level of building integration. Business turnover of main companies covering the whole field of cell/module manufacturing and PV power system developers/installers, increased 18 % in 2002 to reach 130 million euros. Due to a Governmental decision taken in 1998, the ADEME increased its annual public budget for the promotion of PV in France to reach around 10 MEUR per year. This new measure allowed a) to reactivate the ADEME's research and technological

Image-producing procedures for non-medical applications. Benefits, risks, radiation protection; Bildgebende Verfahren im nicht medizinischen Bereich. Nutzen, Risiken, Strahlenschutz

Energy Technology Data Exchange (ETDEWEB)

Czarwinski, Renate [Bundesamt fuer Strahlenschutz, Berlin (Germany); Estier, Sybille [Bundesamt fuer Gesundheit (BAG), Liebefeld (Switzerland). Direktionsbereich Verbraucherschutz; Huhn, Walter [Ministerium fuer Arbeit, Integration und Soziales NRW, Duesseldorf (Germany); Lorenz, Bernd [Lorenz Consulting, Essen (Germany); Vahlbruch, Jan [Hannover Univ. (Germany). Inst. fuer Radiooekologie und Strahlenschutz (IRS); Henning, Ulrich; Michel, Rolf

2016-05-01

A survey is given of image-producing procedures for non-medical applications, and this under technical, juridical and radiation protection aspects. The historical development of these procedures is also described. An example is given for today's practical application.

Application of stochastic frontier approach model to assess technical ...

African Journals Online (AJOL)

Since almost all the arable land is under cultivation, future increase in maize production will heavily depend on technical efficiency and yield improvement rather than expansion in area under production. The main objective of this study was to determine the technical efficiency of smallholder maize production in Kenya.

Report format preferences of technical managers and nonmanagers

Science.gov (United States)

Pinelli, T. E.; Cordle, V. M.; Glassman, M.; Vondran, R. F., Jr.

1984-01-01

A survey of engineers and scientists concerning the format of NASA technical reports indicates that a summary as well as an abstract should be included, that the definitions of symbols and glossary of terms should be located in the front of the report, and that the illustrative material should be integrated with the text rather than grouped at the end of the report. Citation of references by number, one-column, ragged-right-margin layout, and third-person writing style are also preferred by a majority of the respondents. The preferences of managers and nonmanagers are very similar for all aspects of technical report format covered by the survey.

APPLICATION OF ELECTRONIC TACHEOMETER FOR PREAND POST-CONSTRUCTION SURVEY OF ELEVATOR SHAFT

Directory of Open Access Journals (Sweden)

M. S. Nesterionok

2015-01-01

Full Text Available Floor-by-floor survey of installed elements of an elevator shaft using coordinate method and tacheometer is also inhibited by the necessity to determine device installation points for floors of every mounting horizon that leads to additional measurements due to conditions of the completed building framework and presence of a great number of situational disturbances and then it entails significant time expenditure and diminution of accuracy in the obtained results. Technical capabilities of the modern electronic tacheometer substantially simplify an accomplishment of the mission because the device can be applied not only in function of vertical projection but it can be used for preand post-construction survey of the elevator shaft with the help of advanced radiation method. While using the given method the electronic tacheometer equipped with diagonal ocular is installed over a bearing sign in the elevator pit and control points of the elevator shaft are determined with the help of specially developed portable beam deflector in the form of disc with radius r, which is fixed to a handle rod and orientated perpendicularly to a laser beam. An innovation diagram for preand post-construction survey of elevator shaft has been developed while applying this type of deflector. The diagram is characterized by high efficiency due to the fact that one tacheometer installation makes it possible to execute highly accurate, complete plane and high-level surveying of the whole elevator shaft including doorways, door sills and jambs.The paper proposes a new method for pre and post construction survey of the elevator shaft using the electronic tacheometer while applying specially developed beam deflector that ensures a geometric fixing of one or simultaneously two surveying points to spatial coordinate system where the preand post-construction survey is carried out. The method is characterized by high geometric accuracy and technological efficiency.

Survey of EPA facilities for solar thermal energy applications

Science.gov (United States)

Nelson, E. V.; Overly, P. T.; Bell, D. M.

1980-01-01

A study was done to assess the feasibility of applying solar thermal energy systems to EPA facilities. A survey was conducted to determine those EPA facilities where solar energy could best be used. These systems were optimized for each specific application and the system/facility combinations were ranked on the basis of greatest cost effectiveness.

Fiscal 2000 survey report. Survey and study of constellation satellites technology; 2000 nendo chosa hokokusho. Konsutereshon eisei gijutsu ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Demands for constellation satellites were surveyed and satellite systems were studied for extracting basic technical tasks relative to constellation satellite systems and for drafting space verification plans. For a constellation satellite system to accomplish its missions, two or more satellites have to be simultaneously navigated. It is assumed that its field of application will cover earth observation, information communication, risk management, disaster prevention, and the like. With such applications taken into consideration, surveys and studies were conducted about the need and marketability of constellation satellites, need of state-level involvement, and requests for missions to be imposed on a constellation system. For plural satellites to satisfy mission requests by coordinating with each other, it will be necessary to develop basic technologies, such as navigational guidance, communications control, system autonomous management, and operation on the ground. Functions and performance that a constellation satellite system are requested to have and basic technologies to be studied and developed were extracted, and space verification plans were drafted. (NEDO)

Experts' perspective on the performance of Chinese technical guidelines for Plan Environmental Impact Assessment

International Nuclear Information System (INIS)

He Jia; Sun Sun; Bao Cunkuan; Chen Fan; Jiang Dahe

2011-01-01

This research was to evaluate the Technical Guideline (HJ/T130-2003) effectiveness based on data resource from a questionnaire survey and interviews on EIA experts. The result demonstrated that the guideline served mainly as a quality control measure for PEIA products, and only a small proportion of experts considered it effective due to its inconsistency with the newly released Chinese PEIA Regulation (2009) and poor practicability. Current status of SEA implementation in China was also studied in terms of application fields, effectiveness evaluation, and major issues to affect SEA, to conclude that SEA implementation in China is premature, and with limited effectiveness. The major problem was the lack of effective methodologies and technical tools. Recommendations for revising the PEIA Guideline and advices to improving SEA implementation in China were accordingly proposed.

Internet - Technical Developments and Applications 2

CERN Document Server

Tkacz, Ewaryst; Rostanski, Maciej

2012-01-01

The unusual direct progress of civilization in many fields concerning technical sciences is being observed in the period of last two decades. Experiencing extraordinary dynamics of the development of technological processes, particularly in ways of communicating, makes us believe that  the information society is coming into existence. Having the information in today’s world of changing attitudes and socio-economic conditions can be perceived as one of the most important advantages. The content of this book is divided into four parts: ·         Mathematical and technical fundamentals, ·         Information management systems and project management ·         Information security and business continuity management ·         Interdisciplinary problems This monograph has been prepared to contribute in a significant way to the success of implementing consequences of human imagination  into social life. The authors believe that this monograph will influence the further technol...

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 27: The technical communication practices of engineering and science students: Results of the phase 3 academic surveys

Science.gov (United States)

Pinelli, Thomas E.; Barclay, Rebecca O.; Hecht, Laura M.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of engineers and science (Physics) students. The reported data were obtained from a survey of students enrolled in the College of Engineering at the University of Illinois at Urbana-Champaign, Bowling Green State University, and Texas A&M University. The survey was undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign technical reports; and foreign language (reading and speaking) skills.

Condition monitoring using empirical models: technical review and prospects for nuclear applications

International Nuclear Information System (INIS)

Heo, Gyun Young

2008-01-01

The purpose of this paper is to extensively review the Condition Monitoring (CM) techniques using empirical models in an effort to reduce or eliminate unexpected downtimes in general industry, and to illustrate the feasibility of applying them to the nuclear industry. CM provides on-time warnings of system states to enable the optimal scheduling of maintenance and, ultimately, plant uptime is maximized. Currently, most maintenance processes tend to be either reactive, or part of scheduled, or preventive maintenance. Such maintenance is being increasingly reported as a poor practice for two reasons: first, the component does not necessarily require maintenance, thus the maintenance cost is wasted, and secondly, failure catalysts are introduced into properly working components, which is worse. This paper first summarizes the technical aspects of CM including state estimation and state monitoring. The mathematical background of CM is mature enough even for commercial use in the nuclear industry. Considering the current computational capabilities of CM, its application is not limited by technical difficulties, but by a lack of desire on the part of industry to implement it. For practical applications in the nuclear industry, it may be more important to clarify and quantify the negative impact of unexpected outcomes or failures in CM than it is to investigate its advantages. In other words, while issues regarding accuracy have been targeted to date, the concerns regarding robustness should now be concentrated on. Standardizing the anticipated failures and the possibly harsh operating conditions, and then evaluating the impact of the proposed CM under those conditions may be necessary. In order to make the CM techniques practical for the nuclear industry in the future, it is recommended that a prototype CM system be applied to a secondary system in which most of the components are non-safety grade. Recently, many activities to enhance the safety and efficiency of the

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

Survey of heat-pipe application under nuclear environment

International Nuclear Information System (INIS)

Tsuyuzaki, Noriyoshi; Saito, Takashi; Okamoto, Yoshizo; Hishida, Makoto; Negishi, Kanji.

1986-11-01

Heat pipes today are employed in a wide variety of special heat transfer applications including nuclear reactor. In this nuclear technology area in Japan, A headway speed of the heat pipe application technique is not so high because of safety confirmation and investigation under each developing step. Especially, the outline of space craft is a tendency to increase the size. Therefore, the power supply is also tendency to increase the outlet power and keep the long life. Under SP-100 project, the development of nuclear power supply system which power is 1400 - 1600 KW thermal and 100 KW electric power is steadily in progress. Many heat pipes are adopted for thermionic conversion and coolant system in order to construct more safety and light weight system for the project. This paper describes the survey of the heat pipe applications under the present and future condition for nuclear environment. (author)

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Science.gov (United States)

2010-04-01

... applicable to Class II gaming systems? 547.7 Section 547.7 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY... gaming systems? (a) General requirements. (1) The Class II gaming system shall operate in compliance with...

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on analysis of trends of technical innovation in Japan/Europe/the U.S.; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiso chosa (Nichibeio no gijutsu kakushin doko no bunseki ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For survey of the industrial competitive force, it is important to arrange the environment where the continuous and spontaneous technical innovation is generated. To recognize the present situation, the patent information relating to technical innovation, etc. were collected, indices of the number of patent, degree of the reference and scientific link in Japan, the U.S., and Europe were taken out by technology field to analyze the patent trend in the past 10 years. By technology field, the U.S. is superior in a lot of fields. Japan is at top rank in office supplies and camera fields, made strenuous efforts in automobile and semiconductor/electronic fields, but is behind others in medicine, biotechnology and aerospace fields. Concerning the number of patent registration in the U.S., Japan is superior to the U.S. in automobile/electric equipment/metal industries. Europe is superior in food and engineering fields. The U.S. is superior in aerospace industry and biotechnology fields. The U.S. is featured by a large number of patent applications by universities and government organizations. (NEDO)

Application of computers in a Radiological Survey Program

International Nuclear Information System (INIS)

Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

1984-01-01

A brief description of some of the applications of computers in a radiological survey program is presented. It has been our experience that computers and computer software have allowed our staff personnel to more productively use their time by using computers to perform the mechanical acquisition, analyses, and storage of data. It is hoped that other organizations may similarly profit from this experience. This effort will ultimately minimize errors and reduce program costs

Generation of recycled aggregates and technical requirements for some applications

International Nuclear Information System (INIS)

Martinez L, Isabel; Vazquez H, Cristina; Gonzalez F, Belen; Martinez A, Fernando

2010-01-01

In the present framework of sustainable construction, management of construction and demolition (C and D) waste or debris is stressed and its correct implementation requires a previous estimation of the precise quantities and detailed composition of C and D waste.This allows us to make an estimate of the production of recycled aggregate and to analyze the impact of its use in relation to the use of natural aggregate. Research of existing bibliography, the results obtained from both experimental testing and previous experience at construction works where C and D debris is used, enabled us to develop technical specifications for each application of the recycled aggregates. This includes recommendations for use, quality control specifications, and the maximum percentage of recycled aggregate that ought to substitute natural aggregate in concrete mixes in order to get admissible performances.

The Role of the U.S. Government Technical Report in Aeronautics: An Exploratory Study

Science.gov (United States)

1988-08-01

survey questionnaire. 14 23. Technical Discipline -- for purposes of this study technical disciplines include aeronautics, astronautics, chemistry ...report varies because it serves different roles in communicating within and between organizations. The technical report has been defined etymologically ...and Information Systems - Administrative/Management - Other o Technical Discipline * - Aeronautics - Astronautics - Chemistry and Materials

Assessment of potential advantages of high Tc-superconductors for technical application of superconductivity

International Nuclear Information System (INIS)

Schauer, F.; Juengst, K.P.; Komarek, P.; Maurer, W.

1987-09-01

A first assessment of the technical and economical consequences of liquid nitrogen cooling of new superconductors is given. For the investigation the applications of superconductivity are classified in two categories: First, systems where superconductors are practically indispensable for achieving the system's objectives; second, superconductor applications in competition with highly developed conventional technologies. Further development of those superconducting systems in the first category for which the cost of cryogenic equipment is a smaller fraction of the total system cost (e.g. fusion reactor or MHD generator) will hardly be affected. However, for systems like particle accelerators, research magnets, and NMR spectroscopy and imaging systems, the cryogenic equipment expenditures are significant and LN 2 cooling leads here to a reduction of investment and operating costs, to simplified handling and maintenance, to better reliability and availability, and will thereby improve the acceptance and further spread of these systems. In the second category each application of superconductivity has to be compared with its conventional counterpart, separately. Here, electonic components, power switches, resistive current limiters, and especially the power transmission cables are those applications which look most promising. For magnet applications the main advantageous arguments are less the cost saving aspect but more the higher reliability, simplicity, N 2 -availability, and ease of handling. (orig.) [de

Scientific and technical guidance for the preparation and presentation of a health claim application (Revision 2)

DEFF Research Database (Denmark)

Sjödin, Anders Mikael

2017-01-01

EFSA asked the Panel on Dietetic Products, Nutrition and Allergies (NDA) to update the scientific and technical guidance for the preparation and presentation of an application for authorisation of a health claim published in 2011. Since then, the NDA Panel has gained considerable experience...... developments in this area. This guidance document presents a common format for the organisation of information for the preparation of a well-structured application for authorisation of health claims which fall under Articles 13(5), 14 and 19 of Regulation (EC) No 1924/2006. This guidance outlines...... the information and scientific data which must be included in the application, the hierarchy of different types of data and study designs, and the key issues which should be addressed in the application to substantiate the health claim....

An update on technical and methodological aspects for cardiac PET applications

International Nuclear Information System (INIS)

PRESOTTO, Luca; BUSNARDO, Elena; GIANOLLI, Luigi; BETTINARDI, Valentino

2016-01-01

Positron emission tomography (PET) is indicated for a large number of cardiac diseases: perfusion and viability studies are commonly used to evaluate coronary artery disease; PET can also be used to assess sarcoidosis and endocarditis, as well as to investigate amyloidosis. Furthermore, a hot topic for research is plaque characterization. Most of these studies are technically very challenging. High count rates and short acquisition times characterize perfusion scans while very small targets have to be imaged in inflammation/infection and plaques examinations. Furthermore, cardiac PET suffers from respiratory and cardiac motion blur. Each type of studies has specific requirements from the technical and methodological point of view, thus PET systems with overall high performances are required. Furthermore, in the era of hybrid PET/computed tomography (CT) and PET/Magnetic Resonance Imaging (MRI) systems, the combination of complementary functional and anatomical information can be used to improve diagnosis and prognosis. Moreover, PET images can be qualitatively and quantitatively improved exploiting information from the other modality, using advanced algorithms. In this review we will report the latest technological and methodological innovations for PET cardiac applications, with particular reference to the state of the art of the hybrid PET/CT and PET/MRI. We will also report the most recent advancements in software, from reconstruction algorithms to image processing and analysis programs.

Technical Basis for Implementation of the PCM-1B for Personnel Release at Tank Farms

International Nuclear Information System (INIS)

BROWN, R.L.

1999-01-01

The purpose of this document is to define the technical basis and implementing guidelines for using automated personnel contamination monitors, such as the PCM-1B, at the River Protection Project (RPP) in lieu of performing a hand-held instrument followed by a PCM-1B survey for personnel release from contamination areas requiring a beta-gamma whole body survey. This document provides the basis for full implementation of the PCM-1B release survey, without the supplemental hand and foot survey, as currently implemented at RPP. This document applies only to RPP facilities. This document does not provide the technical basis for determining the equivalency of an automated system to hand-held instruments, or to the effective counting capability of automated systems as such technical determinations are contained in TBTN: GDGH-9604-RLS-0015

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

Science.gov (United States)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Risk based technique for improving technical specifications

International Nuclear Information System (INIS)

Kim, I. S.; Jae, M. S.; Kim, B. S.; Hwang, S. W.; Kang, K. M.; Park, S. S.; Yu, Y. S.

2001-03-01

The objective of this study is to develop the systematic guidance for reviewing the documents associated with the changes of technical specifications. The work done in this fiscal year is the following : surveys in TS requirements, TS improvements and TS regulations in foreign countries as well as Korea, surveys on the state-of-the-art of RITSs and their use in Korea, development of a decision-making framework for both the licensee and the regulation agency, description of risk measures, assessment methodology on STI/AOT, and adverse effects caused by periodic maintenance, which are explained in appendix. The results of this study might contribute to enhancing the quality of the current technical specifications and contribute to preparing the risk informed regulation program using the decision-making framework developed in this study

Survey of domestic research on superconducting magnetic energy storage

International Nuclear Information System (INIS)

Dresner, L.

1991-09-01

This report documents the results of a survey of domestic research on superconducting magnetic energy storage (SMES) undertaken with the support of the Oak Ridge National Laboratory (ORNL) Superconductivity Pilot Center. Each survey entry includes the following: Name, address, and other telephone and facsimile numbers of the principal investigator and other staff members; funding for fiscal year 1991, 1992, 1993; brief descriptions of the program, the technical progress to date, and the expected technical progress; a note on any other collaboration. Included with the survey are recommendations intended to help DOE decide how best to support SMES research and development (R ampersand D). To summarize, I would say that important elements of a well-rounded SMES research program for DOE are as follows. (1) Construction of a large ETM. (2) Development of SMES as an enabling technology for solar and wind generation, especially in conjunction with the ETM program, if possible. (3) Development of small SMES units for electric networks, for rapid transit, and as noninterruptible power supplies [uses (2), (3), and (4) above]. In this connection, lightweight, fiber-reinforced polymer structures, which would be especially advantageous for space and transportation applications, should be developed. (4) Continued study of the potential impacts of high-temperature superconductors on SMES, with construction as soon as feasible of small SMES units using high-temperature superconductors (HTSs)

Indicators for control and evaluation of technical-tactical preparation in team handball

Directory of Open Access Journals (Sweden)

Orelbis Aróstica Villa

2016-06-01

Full Text Available The need for monitoring and evaluating the technical and tactical preparation as a dialectical unity led us to the determination of the direct influence among the indicators involved in the process of monitoring and evaluating the technical and tactical preparation in the Handball team at School category. In order to carry out this research, a sample of 12 high performance handball trainers from seven provinces of Cuba was used. Once the sample was determined, we proceeded to the application of methods for analyzing the documents and survey just for collecting the data, to analyze and process them so that we could reach conclusions from the research. The papers concludes that the determination of direct influence among indicators may lead the training to be as close as possible to competition, provoking the athlete to get used to acting under mental and emotional pressure and to experience domain in the correct resolution of the situations presented in the competitions. Also, this influence will allow these indicators to make the planning, control and evaluation of the technical and tactical preparation easier, taking into account the potential and characteristics of the individual athletes.

Study to paraphrase nuclear technical terms with clear and brief explanations

International Nuclear Information System (INIS)

Shobu, Nobuhiro; Takashita, Hirofumi; Horikoshi, Hidehiko; Osawa, Yukiko

2010-01-01

This report summarizes the review work to paraphrase nuclear technical terms with clear and brief explanations. Explanation with nuclear technical terms was not very acceptable to the public in a variety of contexts. The objective of this study is not to paraphrase with the expert's ideas but to paraphrase from the public point of view. Japan Atomic Energy Agency (hereafter abbreviated as 'JAEA') has conducted a survey on public attitudes toward fifty-nine nuclear technical terms by using an online questionnaire. Most of them were frequently used in the brochures of Nuclear fuel Cycle Engineering Laboratories of JAEA. The survey clarified the public awareness and comprehension of each term. Thirty-two terms, which was subject to paraphrase on a priority basis, were selected from fifty-nine nuclear technical terms based on our importance rating. At the work to paraphrase thirty-two terms, emphasis was placed more on clearness and briefness than on scientific/technical accuracy. They are reviewed through focus group interviews. This study brought results on recognizable style and thirty-two well-polished paraphrases. (author)

Survey on the trend of coal liquefaction/gasification technologies, broken down by application; Sekitan no ekika gas ka no yotobetsu gijutsu no doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-01

To drive forward the development of the above-named technologies efficiently and effectively, it is necessary to clearly define what coal derived products will meet the need of the clientele and to develop coal derived products accordingly. This survey aims to disclose the whole pictures of the oil/gas using areas and enable the study and evaluation of the possibilities of using coal derived products as substitutes in every one of the expected applications. It also aims to clarify product characteristics, use conditions, technical tasks, and problems to accompany actual substitution in the applications where possibilities are high of their serving as substitutes. Chapter 1, explaining the trend of coal liquefaction/gasification technologies, describes projects for the development of coal liquefaction/gasification technologies, trend of the development of coal liquefaction/gasification technologies, and properties of coal liquefaction/gasification products. Chapter 2, explaining the trend of demand for energy for use in the respective applications, analyzes the trend of demands for oil products, gases, and methanol. Chapter 3 summarizes the applications of chemical materials and fuels for studying the use of coal liquefaction/gasification products as substitutes in the respective applications. Chapter 4 collects problems to solve for the enhancement of coal liquefaction/gasification projects. (NEDO)

State Geological Survey Contributions to the National Geothermal Data System- Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Allison, M. Lee [Executive Office of the State of Arizona, Tuczon (AZGS), AZ (United States).; Richard, Stephen M. [Executive Office of the State of Arizona, Tuczon (AZGS), AZ (United States).

2015-03-13

The State Geological Survey Contributions to the National Geothermal Data System project is built on the work of the project managed by Boise State University to design and build the National Geothermal Data System, by deploying it nationwide and populating it with data principally from State Geological Surveys through collaboration with the Association of American State Geologists (AASG). This project subsequently incorporated the results of the design-build and other DOE-funded projects in support of the NGDS. The NGDS (www.geothermaldata.org) provides free open access to millions of data records, images, maps, and reports, sharing relevant geoscience, production, and land use data in 30+ categories to propel geothermal development and production in the U.S. NGDS currently serves information gathered from hundreds of the U.S. Department of Energy sponsored development and research projects and geologic data feeds from 60+ data providers throughout all 50 states. These data are relevant to geothermal energy exploration and development, but also have broad applicability in other areas including natural resources (e.g., energy, minerals, water), natural hazards, and land use and management.

Application and development of probabilistic safety assessment for nuclear power plant operations. Report of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

The Technical Committee Meeting on Procedures for Use of PSA for Optimizing Operational Limits and Conditions for Nuclear Power Plants was held in Barcelona from 20 to 23 September 1993 to serve as a forum for discussion of the development of methods and approaches for PSA applications. The meeting was co-sponsored by the IAEA and the Asco and Vandellos nuclear power plants in Spain and was attended by more than 85 participants from 23 countries. The 35 papers and presentations reflected the extent of activities in this area worldwide. Most of the papers discuss PSA application programmes and/or specific methods and approaches used. This TECDOC, which was prepared by the participants of the Technical Committee meeting, summarizes the insights gained from the papers and plenary discussions. It also presents the conclusions of the work of three working groups which discussed the advantages and limitations of specific aspects of PSA. It provides an up-to-date description of computerized tools for risk monitoring in used or under development in Member States. It is hoped that this report will be a useful source of information on PSA applications. Refs, figs, tabs.

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

Science.gov (United States)

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency

Markets, Availability, Notice, and Technical Performance of Terahertz Systems: Historic Development, Present, and Trends

Science.gov (United States)

Hochrein, Thomas

2015-03-01

Although a lot of work has already been done under the older terms "far infrared" or "sub-millimeter waves", the term "terahertz" stands for a novel technique offering many potential applications. The latter term also represents a new generation of systems with the opportunity for coherent, time-resolved detection. In addition to the well-known technical opportunities, an historical examination of Internet usage, as well as the number of publications and patent applications, confirms ongoing interest in this technique. These activities' annual growth rate is between 9 % and 21 %. The geographical distribution shows the center of terahertz activities. A shift from the scientific to more application-oriented research can be observed. We present a survey among worldwide terahertz suppliers with special focus on the European region and the use of terahertz systems in the field of measurement and analytical applications. This reveals the current state of terahertz systems' commercial and geographical availability as well as their costs, target markets, and technical performance. Component cost distribution using the example of an optical pulsed time-domain terahertz system gives an impression of the prevailing cost structure. The predication regarding prospective market development, decreasing system costs and higher availability shows a convenient situation for potential users and interested customers. The causes are primarily increased competition and larger quantities in the future.

Strategies for Retaining Highly Qualified & Experienced Technical Teachers in Teaching Profession in Katsina State, Nigeria

OpenAIRE

Saifullahi Kasim Tafida; Che Kum Clement; Md. Abu Raihan

2015-01-01

The objective of this study is to identify the strategies for retaining highly qualified & experienced technical teachers of technical and vocational educational institutions in Katsina State of Nigeria. Two research questions were formulated to guide the study. A 26 items survey questionnaire was developed and used to elicit responses from technical education administrators, technical education principals/vice principals and technical teachers in technical and vocational education institutio...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

Emerging applications of radiation processing. Proceedings of a technical meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

Approximately 160 gamma irradiators and 1200 electron accelerator based processing units are in operation worldwide. In recent years the IAEA has prepared a directory of industrial gamma irradiators and held several meetings on developments in radiation technology applications. Developments involving the engineering of new sources (both isotope and electrical), high power accelerator applications, etc. have been reported recently, making a review and evaluation of this progress timely. Therefore the IAEA organized a technical meeting in Vienna, Austria, from 28 to 30 April 2003 to review the present situation and the potential contribution of radiation technology to sustainable development. Engineering developments and other features of radiation sources, both isotope and accelerator, were discussed. Recent research has concentrated on three fields: medical and food products, polymers, and environmental pollution control. The stability of radiation sterilized medical implants, as well as the uses of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials, radiation synthesis and modification of polymers for biomedical applications have been studied. Since separation and enrichment technologies play an important role in product recovery and pollution control, the possibility of radiation synthesis of stimuli-responsive membranes, hydrogels and adsorbents is being investigated. Finally, aside from the technologies for flue gas and wastewater treatment already in use, further research is ongoing on the treatment of organic contaminants in both gaseous and liquid phases. Environmental applications, which also offer new opportunities, should be carefully reviewed to reflect existing regulations and current knowledge. The increasingly serious problem of polyaromatic hydrocarbons (PAH) emissions may be solved in part by the application of radiation technology. This is being studied on a pilot scale for the removal of

Emerging applications of radiation processing. Proceedings of a technical meeting

International Nuclear Information System (INIS)

2004-01-01

Approximately 160 gamma irradiators and 1200 electron accelerator based processing units are in operation worldwide. In recent years the IAEA has prepared a directory of industrial gamma irradiators and held several meetings on developments in radiation technology applications. Developments involving the engineering of new sources (both isotope and electrical), high power accelerator applications, etc. have been reported recently, making a review and evaluation of this progress timely. Therefore the IAEA organized a technical meeting in Vienna, Austria, from 28 to 30 April 2003 to review the present situation and the potential contribution of radiation technology to sustainable development. Engineering developments and other features of radiation sources, both isotope and accelerator, were discussed. Recent research has concentrated on three fields: medical and food products, polymers, and environmental pollution control. The stability of radiation sterilized medical implants, as well as the uses of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials, radiation synthesis and modification of polymers for biomedical applications have been studied. Since separation and enrichment technologies play an important role in product recovery and pollution control, the possibility of radiation synthesis of stimuli-responsive membranes, hydrogels and adsorbents is being investigated. Finally, aside from the technologies for flue gas and wastewater treatment already in use, further research is ongoing on the treatment of organic contaminants in both gaseous and liquid phases. Environmental applications, which also offer new opportunities, should be carefully reviewed to reflect existing regulations and current knowledge. The increasingly serious problem of polyaromatic hydrocarbons (PAH) emissions may be solved in part by the application of radiation technology. This is being studied on a pilot scale for the removal of

[Literature survey on botanical origin and clinical application of traditional Tibetan medicine "Shengdeng"].

Science.gov (United States)

Chen, De-Dao; Meng, Xian-Hua; Zhang, Ying-Shan; Chen, Gen-Ping; Huang, Yu-Lan

2012-10-01

"Shengdeng" is its Tibetan transliteration referring to many medicines. Tibetan doctors and pharmacists in different areas use different drugs in formulation and clinical application, which are easily confused. In order to grasp the formula and clinical application accurately, we conduct a literature survey on history and current state of botanical origin and clinical application of "Shengdeng", making clear the application of various herbs named "Shengdeng" and providing reference to all Tibetan researchers and clinical workers in formulation and clinical application.

Review of Development Survey of Phase Change Material Models in Building Applications

Directory of Open Access Journals (Sweden)

Hussein J. Akeiber

2014-01-01

Full Text Available The application of phase change materials (PCMs in green buildings has been increasing rapidly. PCM applications in green buildings include several development models. This paper briefly surveys the recent research and development activities of PCM technology in building applications. Firstly, a basic description of phase change and their principles is provided; the classification and applications of PCMs are also included. Secondly, PCM models in buildings are reviewed and discussed according to the wall, roof, floor, and cooling systems. Finally, conclusions are presented based on the collected data.

Annotated bibliography of structural equation modelling: technical work.

Science.gov (United States)

Austin, J T; Wolfle, L M

1991-05-01

Researchers must be familiar with a variety of source literature to facilitate the informed use of structural equation modelling. Knowledge can be acquired through the study of an expanding literature found in a diverse set of publishing forums. We propose that structural equation modelling publications can be roughly classified into two groups: (a) technical and (b) substantive applications. Technical materials focus on the procedures rather than substantive conclusions derived from applications. The focus of this article is the former category; included are foundational/major contributions, minor contributions, critical and evaluative reviews, integrations, simulations and computer applications, precursor and historical material, and pedagogical textbooks. After a brief introduction, we annotate 294 articles in the technical category dating back to Sewall Wright (1921).

Technical report writing today

CERN Document Server

Riordan, Daniel G

2014-01-01

"Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

Technical Writing 1987: Galloping Off in at Least Two Directions.

Science.gov (United States)

Stohrer, Freda F.

Technical writing instructors generally agree about the absolute need for communication skills throughout the technological work place, but a survey of technical writing journal articles shows a lack of focus on ways to address business's needs for on-the-job literacy. One major advance within the profession in recent years has been the…

Total Survey Error for Longitudinal Surveys

NARCIS (Netherlands)

Lynn, Peter; Lugtig, P.J.

2016-01-01

This article describes the application of the total survey error paradigm to longitudinal surveys. Several aspects of survey error, and of the interactions between different types of error, are distinct in the longitudinal survey context. Furthermore, error trade-off decisions in survey design and

CERN Technical Training 2005: WBTechT offers online training

CERN Multimedia

Davide Vitè

2005-01-01

The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information.

Educational Choice Regarding Technical Education: Research with Case Study

Science.gov (United States)

Kacerauskas, Tomas; Šaparauskas, Jonas

2017-01-01

In first part, the models, theories, mechanisms and presumptions, as well as the ideas of educational choice discourse have been scrutinized. In the second part, the survey on educational choice at Vilnius Gediminas Technical University, Lithuania has been presented. The methodology used in this research is a survey of respondents and survey…

Application of technical devices with the elements of sport for development of level of physical preparedness and psychophysiological possibilities of children 1-5 years

Directory of Open Access Journals (Sweden)

Lakhno E.G.

2010-10-01

Full Text Available The necessity of application of technical devices is grounded for development of level of physical preparedness and психофизиологических possibilities of children. Technical devices are developed with the elements of basket-ball, sporting tourism and by the analogues of the system of M.Montessori. In research 52 children of age-dependent group of 1-2 years, 56 children of 3-4 years, 56 children of 4-5 years took part. It is set that application of methods with the use of technical devices with the elements of sport is instrumental there are 1-5 years in the increase of indexes of physical preparedness and psychophysiological possibilities of children.

A survey on the modeling and applications of cellular automata theory

Science.gov (United States)

Gong, Yimin

2017-09-01

The Cellular Automata Theory is a discrete model which is now widely used in scientific researches and simulations. The model is comprised of some cells which changes according to a specific rule over time. This paper provides a survey of the Modeling and Applications of Cellular Automata Theory, which focus on the program realization of Cellular Automata Theory and the application of Cellular Automata in each field, such as road traffic, land use, and cutting machines. Each application is further explained, and several related main models are briefly introduced. This research aims to help decision-makers formulate appropriate development plans.

Typography and layout of technical reports - Survey of current practices

Science.gov (United States)

Pinelli, T. E.; Cordle, V. M.; Mccullough, R.

1985-01-01

As part of a review of the NASA Langley Research Center scientific and technical information program, 50 technical reports from industry, research institutions, and government agencies were systematically examined and analyzed to determine current usage and practice in regard to (1) typography, including composition method, type style, type size, and margin treatment; (2) graphic design, including layout and imposition of material on the page; and (3) physical media, including paper, ink, and binding methods. The results indicate that approximately 50 percent of the reports were typeset, 70 percent used Roman (serif) type, 80 percent used 10- or 11-point type for text, 60 percent used a ragged right-hand margin, slightly more than half used paragraph indentation, 75 percent used a single-column layout, 65 percent had one or more figures or tables placed perpendicular to (not aligned with) the text, and perfect binding was the most frequently used binding method.

ILearning and EHomeStudy: Multimedia Training and Assessments for Field Survey Staff

Directory of Open Access Journals (Sweden)

Charles Loftis

2008-04-01

Full Text Available Survey data collection projects strive to collect high quality data from survey respondents. The quality of the data collected is greatly dependent upon the effectiveness of field interviewers (FIs to conduct inperson screenings and interviews. Training FIs and subsequently assessing their knowledge of project protocol, methods and interviewing techniques is critical to the overall success of any data collection effort. For large surveys, as the number of FIs increase, the cost of inperson training can become prohibitively large. As a cost effective solution to increase the quality of the field data, we developed a suite of web and media based training and assessment tools called iLearning and eHomeStudy for training field staff. Besides saving the project costs associated with inperson training, we are also able to provide refresher trainings throughout the year. This application also enables FIs to view standardized training courses at their convenience and at their own pace. This paper describes the technical details, key features and benefits of this application suite, and also it includes some details on user satisfaction and future directions.

Innovative technical plasma applications

International Nuclear Information System (INIS)

Wintner, E.

2013-01-01

Plasma is the predominant status of matter, in stars as well as in interstellar space. In science, it was only recognized rather late as a specific (fourth) state of matter: Sir William Crookes described it in 1879 as “radiant matter”, Irving Langmuir created the name “plasma” in 1928. Technically generated plasma is employed very broadly in modern technology. Some examples are Plasma Displays, Fluorescent Lamps (also the modern Energy Saving Lamps), Corona Discharges (for e.g. Ozone generation, or even engine ignition), arc welding and cutting, reactive ion etching, mass spectroscopy, ion rocket engines and many more. Very early since the development of the laser, it was also employed to generate a plasma (spark) in air or on surfaces. Generally, for this purpose at least ns (“Giant”) pulses have to be used. In more recent times, pico- and femtosecond pulses have allowed to create plasma very easily and effectively. Laser fusion may represent the ultimate application in this direction, based on highly amplified ns pulses for inertial confinement or ps pulses designed as fast igniter. The idea of employing laser pulses for the ignition of engines was attempted for the first time in 1978, although with inadequate tools like the CO2 laser. After a long time of inactivity in this field, about 10 years ago a few institutions like Vienna University of Technology first resumed this approach with the help of modern type solid-state lasers and started systematic investigations around the idea of laser ignition of internal combustion engines. Now, this technique has reached a high degree of maturity; remaining problems lie on the development level and are to be solved soon. Ambitious product development by leading engine producers or ignition equipment suppliers has been started world-wide since several years and, as a result, in one or two years laser ignition will probably be imple-mented into high power gas engines or, somewhat later, high-priced automotive

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 28: The technical communication practices of aerospace engineering and science students: Results of the phase 4 cross-national surveys

Science.gov (United States)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate aerospace engineering and science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an aerospace engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication skills, practices, habits, and training of aerospace engineering and science students. The reported data were obtained from a survey of students enrolled in aerospace engineering and science programs at universities in India, Japan, Russia, and the United Kingdom. The surveys were undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Tracing the History of Technical Communication from 1850-2000: Plus a Series of Survey Studies.

Science.gov (United States)

McDowell, Earl E.

This research focuses on the history of technical communication since 1850, with a specific focus on the technological changes that occurred between 1900 and 1950. This paper also discusses the development of professional technical communication organizations and the development of technical communication programs at the bachelor, masters, and…

A survey on technical efficiency, marketing and market structure of saffron crop, Iran

Directory of Open Access Journals (Sweden)

Mahmoud Shaban

2014-03-01

Full Text Available The current study attempted to determine technical efficiency as well as study the marketing and market structure of Saffarn crop in Iran. To access the research goals 140 farms, 25 retailers and 14 wholesalers randomly selected. The necessary data collected through interview and filling questionarie. Apart from this, some agricultural Expert from selected cities of Razavi province have been chosen to interview. To determine the market time-series data for the period of 1995-12 was used. To determine technical efficiency DEA method, to calculate marketing margins Digbi method and to find market structure concentration ratio and Herfindal index were used. The results indicated that, the average technical efficiency was 63.49 and minimum and maximum technical efficiency respectively 19.04 and 100, retailer margin mean of Saffron was more than wholesale margin mean and average marketing cost coefficient of Saffron was about 14.78. It means that, marketing factors share in final price is 14.78. Address to the results the Saffaran’s market structure is oligopoly.

Technical requirements for the ASME PRA standard for nuclear power plant applications

International Nuclear Information System (INIS)

Fleming, Karl N.; Bernsen, Sidney A.; Simard, Ronald L.

2000-01-01

In 1998 the American Society of Mechanical Engineers (ASME) formed the Committee on Nuclear Risk Management (CNRM) and a Project Team to develop a standard on PRAs for use in risk informed applications. This ASME standard is being developed to help provide an adequate level of quality in PRAs that are being used to support ASME initiatives to risk informed in-service inspection (ISI) and in-service testing (IST) of nuclear power plant components. A related need supported by the industry and the U.S. Nuclear Regulatory Commission is to reduce the level of effort that is being expended in pilot applications of risk informed initiatives to address questions about the sufficiency of quality in the supporting PRA models. The purpose of this paper is to discuss the authors' views on some of the technical issues that were encountered in the effort to develop the ASME PRA standard. Draft 12 of this standard has been issued for comment, and is currently being finalized with the aim of releasing the standard in early 2001. (author)

Proceedings of the LLNL Technical Women`s Symposium

Energy Technology Data Exchange (ETDEWEB)

von Holtz, E. [ed.

1993-12-31

This report documents events of the LLNL Technical Women`s Symposium. Topics include; future of computer systems, environmental technology, defense and space, Nova Inertial Confinement Fusion Target Physics, technical communication, tools and techniques for biology in the 1990s, automation and robotics, software applications, materials science, atomic vapor laser isotope separation, technical communication, technology transfer, and professional development workshops.

Report on a survey in fiscal 1999. Survey on industrial utilization of microorganism reaction mechanisms under anaerobic condition; 1999 nendo kenki jokenka ni okeru biseibutsu hanno kiko no kogyoteki riyo ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Industrial utilization of reaction mechanisms of microorganisms under anaerobic condition permits structuring energy saving type production processes. The present survey has investigated features of new microorganisms under anaerobic condition and the status of researches thereon inside and outside the country, and discussed their future applications. Chapter 1 compares anaerobic microorganisms and functions of microorganism under anaerobic condition with those aerobic to describe their general features, and describes the purpose of this survey and the summary of the investigations. Chapter 2 surveys the current status of technologies to utilize microorganisms under anaerobic condition. Chapter 3 outlines metabolic characteristics of the anaerobic microorganisms, and extracts functions effective for material production by different anaerobic microorganisms to describe their applicability. Chapter 4 evaluates the system classification for the anaerobic microorganisms utilizing the basic arrangement of 16S rRNA genes, and extracts technical problems therein. Chapter 5 proposes structuring a total methane fermentation system including a raw material collecting process, and enhancing alcohol productivity of Zymomonas bacteria. (NEDO)

Application of best practice for setting minimum energy efficiency standards in technically disadvantaged countries: Case study of Air Conditioners in Brunei Darussalam

International Nuclear Information System (INIS)

Shi, Xunpeng

2015-01-01

Highlights: • Setting MEPS requires significant data, financial resources and technical capacity. • Application of best practice in technical disadvantaged countries (TDCs) was demonstrated. • Best practice was successfully applied to Brunei for its AC MEPS. • For Brunei, COP at 2.9 is recommended and 15% efficiency improvement is achievable. • The methodology is applicable to other appliances in any TDCs. - Abstract: Application of the best practice of setting minimum energy performance standards (MEPS) in technically disadvantaged countries (TDCs) faces many barriers. The best practice of determining MEPS has a comprehensive analytical framework including engineering-economic analysis, life-cycle cost-benefit analysis, as well stakeholders’ and market impact assessments. However, TDCs usually are lack of reference product classes, market data, and other necessary inputs data. This study demonstrated how to overcome those barriers to apply the best practice to TDCs using the actual experience in setting initial MEPS for Air Conditioners (ACs) in Brunei from scratch with limited secondary data as an example. The series of application works include definition of the product classes and the baseline group; collection of market data; formulation of cost-efficiency relationship from the market data; examination of the economic, environmental, and financial impacts of various MEPS options; revealing of the consumers’ willingness to pay; and analysis of the impacts and responses from the industry and consumers. The coordination with the compliance of the Montreal Protocol was also considered. The methodology should also be applicable to setting MEPF for other appliances in any TDCs.

Technical evaluation report on the proposed amendment to the technical specifications on the reactor protection system and the engineered safety features actuation system for Ft. Calhoun, Unit No. 1

International Nuclear Information System (INIS)

Selan, J.C.

1982-01-01

This report documents the technical evaluation of the application to amend the Technical Specifications for the Ft. Calhoun Unit No. 1 Nuclear Generating Plant. The review criteria are based on the Technical Specifications of St. Lucie and Calvert Cliffs, IEEE Standards, Combustion Engineering Standard Technical Specifications, and the Code of Federal Regulations. The evaluation compares the submittal made by the licensee with the NRC staff position and the review criteria and presents the reviewer's conclusion on the acceptability of the application to amend the Technical Specifications

INS/GNSS Integration for Aerobatic Flight Applications and Aircraft Motion Surveying.

Science.gov (United States)

V Hinüber, Edgar L; Reimer, Christian; Schneider, Tim; Stock, Michael

2017-04-26

This paper presents field tests of challenging flight applications obtained with a new family of lightweight low-power INS/GNSS ( inertial navigation system/global satellite navigation system ) solutions based on MEMS ( micro-electro-mechanical- sensor ) machined sensors, being used for UAV ( unmanned aerial vehicle ) navigation and control as well as for aircraft motion dynamics analysis and trajectory surveying. One key is a 42+ state extended Kalman-filter-based powerful data fusion, which also allows the estimation and correction of parameters that are typically affected by sensor aging, especially when applying MEMS-based inertial sensors, and which is not yet deeply considered in the literature. The paper presents the general system architecture, which allows iMAR Navigation the integration of all classes of inertial sensors and GNSS ( global navigation satellite system ) receivers from very-low-cost MEMS and high performance MEMS over FOG ( fiber optical gyro ) and RLG ( ring laser gyro ) up to HRG ( hemispherical resonator gyro ) technology, and presents detailed flight test results obtained under extreme flight conditions. As a real-world example, the aerobatic maneuvers of the World Champion 2016 (Red Bull Air Race) are presented. Short consideration is also given to surveying applications, where the ultimate performance of the same data fusion, but applied on gravimetric surveying, is discussed.

Practices and developments in spent fuel burnup credit applications. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-10-01

The International Atomic Energy Agency convened a technical committee Meeting on Requirements, Practices and Developments in Burnup Credit (BUC) Applications in Madrid, Spain, from 22 to 26 April 2002. The purpose of this meeting was to explore the progress and status of international activities related to the BUC applications for spent nuclear fuel. This meeting was the third major meeting on the uses of BUC for spent fuel management systems held since the IAEA began to monitor the uses of BUC in spent fuel management systems in 1997. The first major meeting was an Advisory Group meeting (AGM), which was held in Vienna, in October 1997. The second major meeting was a technical committee meeting (TCM), which was held in Vienna, in July 2000. Several consultants meetings were held since 1997 to advise and assist the IAEA in planning and conducting its BUC activities. The proceedings of the 1997 AGM were published as IAEA-TECDOC-1013, and the proceedings of the 2000 TCM as IAEA-TECDOC-1241. BUC for wet and dry storage systems, spent fuel transport, reprocessing and final disposal is needed in many Member States to allow for increased enrichment, and to increase storage capacities, cask capacities and dissolver capacities avoiding the need for extensive modifications. The use of BUC is a necessity for spent fuel disposal.

Report on the basic design of the FY 1998 technical information database; 1998 nendo gijutsu joho database no kihon sekkei hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of promoting the effective transfer of the results of technical development and the technical information distribution, study and basic design were conducted of a concept of the new technical database run by NEDO. In the study, the following were conducted to extract the subjects: analysis of examples of project databases such as CADDET, scientific technology research information (JCLEARING), evaluation/survey of the present situation of database users, etc. In the study of a concept of technical information database, clarified were the classification of information, definition of the details, finding-out of relations between various kinds of information, mechanism of collection/processing/storage/dispatch/exchange of information, role of NEDO, etc. In the basic design, as the NEDO technical information database viable for the moment, the rough design was conducted of the project information, information on result reports, and information on research institutes. Further, to handle in unity the database controlled in different method, studied were the applicability to the project database of the general combined concept, advantages, restricted items, etc. (NEDO)

On-Line Monitoring of Instrument Channel Performance: Volume 3: Applications to Nuclear Power Plant Technical Specification Instrumentation

International Nuclear Information System (INIS)

Davis, E.; Rasmussen, B.

2004-01-01

This report is a guide for a technical specification change submittal and subsequent implementation of on-line monitoring for safety-related applications. This report is the third in a three-volume set. Volume 1, ''Guidelines for Model Development and Implementation'', presents the various tasks that must be completed to prepare models for and to implement an on-line monitoring system

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

Science.gov (United States)

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

RNA-seq: technical variability and sampling

Science.gov (United States)

2011-01-01

Background RNA-seq is revolutionizing the way we study transcriptomes. mRNA can be surveyed without prior knowledge of gene transcripts. Alternative splicing of transcript isoforms and the identification of previously unknown exons are being reported. Initial reports of differences in exon usage, and splicing between samples as well as quantitative differences among samples are beginning to surface. Biological variation has been reported to be larger than technical variation. In addition, technical variation has been reported to be in line with expectations due to random sampling. However, strategies for dealing with technical variation will differ depending on the magnitude. The size of technical variance, and the role of sampling are examined in this manuscript. Results In this study three independent Solexa/Illumina experiments containing technical replicates are analyzed. When coverage is low, large disagreements between technical replicates are apparent. Exon detection between technical replicates is highly variable when the coverage is less than 5 reads per nucleotide and estimates of gene expression are more likely to disagree when coverage is low. Although large disagreements in the estimates of expression are observed at all levels of coverage. Conclusions Technical variability is too high to ignore. Technical variability results in inconsistent detection of exons at low levels of coverage. Further, the estimate of the relative abundance of a transcript can substantially disagree, even when coverage levels are high. This may be due to the low sampling fraction and if so, it will persist as an issue needing to be addressed in experimental design even as the next wave of technology produces larger numbers of reads. We provide practical recommendations for dealing with the technical variability, without dramatic cost increases. PMID:21645359

Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

Science.gov (United States)

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-05-23

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

Technical and cost advantages of silicon carbide telescopes for small-satellite imaging applications

Science.gov (United States)

Kasunic, Keith J.; Aikens, Dave; Szwabowski, Dean; Ragan, Chip; Tinker, Flemming

2017-09-01

Small satellites ("SmallSats") are a growing segment of the Earth imaging and remote sensing market. Designed to be relatively low cost and with performance tailored to specific end-use applications, they are driving changes in optical telescope assembly (OTA) requirements. OTAs implemented in silicon carbide (SiC) provide performance advantages for space applications but have been predominately limited to large programs. A new generation of lightweight and thermally-stable designs is becoming commercially available, expanding the application of SiC to small satellites. This paper reviews the cost and technical advantages of an OTA designed using SiC for small satellite platforms. Taking into account faceplate fabrication quilting and surface distortion after gravity release, an optimized open-back SiC design with a lightweighting of 70% for a 125-mm SmallSat-class primary mirror has an estimated mass area density of 2.8 kg/m2 and an aspect ratio of 40:1. In addition, the thermally-induced surface error of such optimized designs is estimated at λ/150 RMS per watt of absorbed power. Cost advantages of SiC include reductions in launch mass, thermal-management infrastructure, and manufacturing time based on allowable assembly tolerances.

Technical aspects of fuel reprocessing

International Nuclear Information System (INIS)

Groenier, W.S.

1982-02-01

The purpose of this paper is to present a brief description of fuel reprocessing and some present developments which show the reliability of nuclear energy as a long-term supply. The following topics are discussed: technical reasons for reprocessing; economic reasons for reprocessing; past experience; justification for advanced reprocessing R and D; technical aspects of current reprocessing development. The present developments are mainly directed at the reprocessing of breeder reactor fuels but there are also many applications to light-water reactor fuel reprocessing. These new developments involve totally remote operation, and maintenance. To demonstrate this advanced reprocessing concept, pilot-scale demonstration facilities are planned with commercial application occurring sometime after the year 2000

Reader-Centered Technical Writing

Science.gov (United States)

Narayanan, M.

2012-12-01

an old schema. This reinforces basic engineering and mathematical design concepts. Accommodation: Here, it may work in a different manner. Writers may have to accommodate an old schema to a new object. This helps engineers to focus more on applications. Adaptation: Assimilation and accommodation are the two sides of adaptation, Jean Piaget's term for what most of us would call learning. Mathematical design concepts generated by students should be suitable for creative engineering applications. References : Phillips, D. C. and Soltis, Jonas F. (2003) "Piagetian Structures and Psychological Constructivism," in Perspectives on Learning (4th edition). New York: Teachers College Press. Salvo, Michael J. (2001). Ethics of Engagement: User-Centered Design and Rhetorical Methodology. Technical Communication Quarterly Volume 10, Issue 3, 2001. pages 273-290. http://www.ship.edu/~cgboeree/piaget.html http://owl.english.purdue.edu/owl/resource/624/01/

Engineering Technical Review Planning Briefing

Science.gov (United States)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

A study on development of guideline on writing technical document for electrical medical devices: Bone absorptiometric X-ray system

Energy Technology Data Exchange (ETDEWEB)

Lee, Sung Youl; Kim, Jae Ryang; Kim, Eun Rim; Lee, Jun Ho; Lee, Chang Hyung; Park, Chang Won [Medical Device Research Division, Ministry of Food and Drug Safety, Cheongju (Korea, Republic of)

2016-06-15

The market size of the bone absorptiometric X-ray system and the number of its approval by Ministry of Food and Drug Safety (MFDS) has annually increased, with a trend of increasing aging population and osteoporosis patients. For approval of manufactured or imported medical devices in Republic of Korea, it is required to submit its technical document. Therefore, it is need to develop the technical document guideline for the bone absorptiometric X-ray system for manufacturers, importers and reviewers. First of all, the technical documents which were already approved were examined and analyzed through MFDS approval administration system. Second, safety and performance test standards and methods that match international standards were drawn after conducting survey of the market status and the technology development trend for it, with examination and analysis of applicable domestic and overseas standards. Third, by operating industry-research-government cooperation, the guideline draft on writing technical document for the bone absorptiometric X-ray system was discussed, collecting their opinion. As a result, it is suitable to international and domestic condition, includes test evaluation methods and offer various information with appropriate examples to civil petitioner, when they write the technical documents.

A study on development of guideline on writing technical document for electrical medical devices: Bone absorptiometric X-ray system

International Nuclear Information System (INIS)

Lee, Sung Youl; Kim, Jae Ryang; Kim, Eun Rim; Lee, Jun Ho; Lee, Chang Hyung; Park, Chang Won

2016-01-01

The market size of the bone absorptiometric X-ray system and the number of its approval by Ministry of Food and Drug Safety (MFDS) has annually increased, with a trend of increasing aging population and osteoporosis patients. For approval of manufactured or imported medical devices in Republic of Korea, it is required to submit its technical document. Therefore, it is need to develop the technical document guideline for the bone absorptiometric X-ray system for manufacturers, importers and reviewers. First of all, the technical documents which were already approved were examined and analyzed through MFDS approval administration system. Second, safety and performance test standards and methods that match international standards were drawn after conducting survey of the market status and the technology development trend for it, with examination and analysis of applicable domestic and overseas standards. Third, by operating industry-research-government cooperation, the guideline draft on writing technical document for the bone absorptiometric X-ray system was discussed, collecting their opinion. As a result, it is suitable to international and domestic condition, includes test evaluation methods and offer various information with appropriate examples to civil petitioner, when they write the technical documents

Time Value of Money and Its Applications in Corporate Finance: A Technical Note on Linking Relationships between Formulas

Science.gov (United States)

Chen, Jeng-Hong

2009-01-01

Time Value of Money (TVM) is the most important chapter in the basic corporate finance course. It is imperative to understand TVM formulas because they imply important TVM concepts. Students who really understand TVM concepts and formulas can learn better in chapters of TVM applications. This technical note intends to present more complete TVM…

National survey report on PV power applications in Switzerland 2006

International Nuclear Information System (INIS)

Huesser, P.; Hostettler, T.

2007-01-01

This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

National survey report on PV power applications in Switzerland 2006

Energy Technology Data Exchange (ETDEWEB)

Huesser, P. [Nova Energie GmbH, Aarau (Switzerland); Hostettler, T. [Ingenieurbuero Hostettler, Berne (Switzerland)

2007-07-01

This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey

Science.gov (United States)

Ni, Jianjun; Wu, Liuying; Fan, Xinnan; Yang, Simon X.

2016-01-01

Bioinspired intelligent algorithm (BIA) is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research. PMID:26819582

Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey.

Science.gov (United States)

Ni, Jianjun; Wu, Liuying; Fan, Xinnan; Yang, Simon X

2016-01-01

Bioinspired intelligent algorithm (BIA) is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research.

Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey

Directory of Open Access Journals (Sweden)

Jianjun Ni

2016-01-01

Full Text Available Bioinspired intelligent algorithm (BIA is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research.

77 FR 64464 - Information Systems Technical Advisory Committee

Science.gov (United States)

2012-10-22

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, November 7...

Technology survey of computer software as applicable to the MIUS project

Science.gov (United States)

Fulbright, B. E.

1975-01-01

Existing computer software, available from either governmental or private sources, applicable to modular integrated utility system program simulation is surveyed. Several programs and subprograms are described to provide a consolidated reference, and a bibliography is included. The report covers the two broad areas of design simulation and system simulation.

FY 2000 survey on technical trends. Survey of technical trends on materials for heightening of performance for power generation facility use; 2000 nendo gijutsu doko nado chosa. Hatsuden shisetsuyo koseinoka zairyo ni kakawaru gijutsu doko nado chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As to high performance/high function plastic materials used in power generation facilities, technical trends were surveyed on the recycle situation and recycle R and D to study the subjects to be solved. For wire covering materials, vinyl chloride, polyethylene, rubber, etc. are used, and the recycle of resin has not been advanced. Concerning the generation of waste plastic, the existence of a lot of plastics different in characteristics makes the recycle difficult. As to the use of waste plastic as resource, the material recycle and recovery of combustion energy are being made, but only a part of the plastic is reused as chemical raw materials. Relating to the R and D of the chemical recycle technology, there are sample studies on the pyrolysis of polyolefine, dechlorination of chlorine base resins, etc. Recently, the following have been made public: proposal of depolymerization monomer based on the cyclic monomer, study of liquefaction of approximately 100% of the thermosetting resin, approach to the solvolysis by supercritical solvent. (NEDO)

Examining the Professional Development Experiences and Non-Technical Skills Desired for Geoscience Employment

Science.gov (United States)

Houlton, H. R.; Ricci, J.; Wilson, C. E.; Keane, C.

2014-12-01

Professional development experiences, such as internships, research presentations and professional network building, are becoming increasingly important to enhance students' employability post-graduation. The practical, non-technical skills that are important for succeeding during these professional development experiences, such as public speaking, project management, ethical practices and writing, transition well and are imperative to the workplace. Thereby, graduates who have honed these skills are more competitive candidates for geoscience employment. Fortunately, the geoscience community recognizes the importance of these professional development opportunities and the skills required to successfully complete them, and are giving students the chance to practice non-technical skills while they are still enrolled in academic programs. The American Geosciences Institute has collected data regarding students' professional development experiences, including the preparation they receive in the corresponding non-technical skills. This talk will discuss the findings of two of AGI's survey efforts - the Geoscience Student Exit Survey and the Geoscience Careers Master's Preparation Survey (NSF: 1202707). Specifically, data highlighting the role played by internships, career opportunities and the complimentary non-technical skills will be discussed. As a practical guide, events informed by this research, such as AGI's professional development opportunities, networking luncheons and internships, will also be included.

ON-Line Monitoring of Instrument Channel Performance: Volume 3: Applications to Nuclear Power Plant Technical Specification Instrumentation

Energy Technology Data Exchange (ETDEWEB)

E Davis, B Rasmussen

2004-12-31

This report is a guide for a technical specification change submittal and subsequent implementation of on-line monitoring for safety-related applications. This report is the third in a three-volume set. Volume 1, ''Guidelines for Model Development and Implementation'', presents the various tasks that must be completed to prepare models for and to implement an on-line monitoring system.

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

[An investigation of the application of hygienic standards for the design of industrial enterprises (GBZ 1-2010)].

Science.gov (United States)

Lu, Y; Zhang, M

2016-08-20

Objective: To study the applicability, the high frequency used content, the feasibility, and issues needed to be solved of the standard of GBZ 1-2010, aiming to provide technical evidence for the revision of GBZ1. Methods: In the study, the data were collected by referring to the literature database and the questionnaire from June 2013 to June 2015. There were 2 surveys carried out in the study, with methods including questionnaire survey and specific interview. The investigation methods include the paper version of the questionnaire by mail, the electronic version of the questionnaire by e-mail, and the online survey. And 111 questionnaires were collected. Results: In total, the applicability survey (the first survey) received 156 suggestions covering 76 items from 23 facilities, and 13 key technical issues were summarized to be solved as priorities. In the application survey (the second survey) , the leading three jobs using GBZ 1-2010 were the occupational hazards evaluation for constructive project (82.0%) , lecturing/training (65.8%) , occupational hazards monitoring (64.9%) , respectively. The high frequency used contents of GBZ 1-2010 were the sixth part "the basic hygienic requirements for workplace" (90.1%) , the fifth part "site selection, overall layout and workshop design" (87.4%) , the seventh part "the basic hygienic requirements for welfare room" (85.6%) , respectively. In the results of feasibility, scores of the fourth part "the general rules" , the fifth part "site selection, overall layout and workshop design" , the sixth part "the basic hygienic requirements for workplace" , the seventh part "the basic hygienic requirements for welfare room" , the eighth "emergency rescue" , annex A "the correct use instructions" , annex B "buffer zone standards for industrial enterprises" were 2.6, 3.1, 3.5, 3.8, 3.2, 3.3, 2.6, respectively. Among 111 questionnaires, the parts needed to be modified as priories were the fifth part "site selection, overall layout

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

[Implementation of the technical requirements of the UNE-EN-ISO 15189 quality standard in a mycobacterial laboratory].

Science.gov (United States)

Guna Serrano, M del Remedio; Ocete Mochón, M Dolores; Lahiguera, M José; Bresó, M Carmen; Gimeno Cardona, Concepción

2013-02-01

The UNE-EN-ISO 15189:2007 standard defines the requirements for quality and competence that must be met by medical laboratories. These laboratories should use this international standard to develop their own quality management systems and to evaluate their own competencies; in turn, this standard will be used by accreditation bodies to confirm or recognize the laboratories' competence. In clinical microbiology laboratories, application of the standard implies the implementation of the technical and specific management requirements that must be met to achieve optimal quality when carrying out microbiological tests. In Spain, accreditation is granted by the Spanish Accreditation Body (Entidad Nacional de Acreditación). This review aims to discuss the practical application of the standard's technical requirements in mycobacterial laboratory. Firstly, we define the scope of accreditation. Secondly, we specify how the items of the standard on personnel management, control of equipment, environmental facilities, method validation, internal controls and customer satisfaction surveys were developed and implemented in our laboratory. Copyright © 2013 Elsevier España, S.L. All rights reserved.

TECHNICAL ASPECTS RELATED TO THE APPLICATION OF SFM PHOTOGRAMMETRY IN HIGH MOUNTAIN

Directory of Open Access Journals (Sweden)

M. Scaioni

2018-05-01

Full Text Available Structure-from-Motion (SfM photogrammetry is a flexible and powerful tool to provide 3D point clouds describing the surface of objects. Due to the easy transportability and low-cost of necessary equipment with respect to laser scanning techniques, SfM photogrammetry has great potential to be applied in harsh high-mountain environment. Here point clouds and derived by-products (DEM’s, orthoimages, Virtual-Reality models are needed to document surface morphology and to investigate dynamic processes such as landslides, avalanches, river and soil erosion, glacier retreat. On the other hand, from both the literature and the direct experience of the authors, there are some technical issues that still deserve thorough investigations. The paper would like to address some open problems and suggest solutions, in particular on regards of the photogrammetric network design, the strategy for georeferencing the final products, and for their comparison within time. The discussion is documented with some examples, mainly from surveying campaigns at the Forni Glacier in Italian Alps.

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2007

International Nuclear Information System (INIS)

2008-08-01

This report presents the results of the 13 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2007 and analyzes trends in the implementation of PV power systems between 1992 and 2007. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2005

International Nuclear Information System (INIS)

2006-08-01

This report presents the results of the 11 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2005 and analyzes trends in the implementation of PV power systems between 1992 and 2005. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-08-15

This report presents the results of the 11{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2005 and analyzes trends in the implementation of PV power systems between 1992 and 2005. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2006

International Nuclear Information System (INIS)

2007-08-01

This report presents the results of the 12 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2006 and analyzes trends in the implementation of PV power systems between 1992 and 2006. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-08-15

This report presents the results of the 13{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2007 and analyzes trends in the implementation of PV power systems between 1992 and 2007. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-08-15

This report presents the results of the 12{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2006 and analyzes trends in the implementation of PV power systems between 1992 and 2006. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2002

International Nuclear Information System (INIS)

2003-08-01

This report presents the results of the eighth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2002 and analyzes trends in the implementation of PV power systems between 1992 and 2002. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-09-15

This report presents the results of the ninth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2003 and analyzes trends in the implementation of PV power systems between 1992 and 2003. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-08-15

This report presents the results of the eighth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2002 and analyzes trends in the implementation of PV power systems between 1992 and 2002. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2003

International Nuclear Information System (INIS)

2004-09-01

This report presents the results of the ninth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2003 and analyzes trends in the implementation of PV power systems between 1992 and 2003. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

AIMES Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States)

2017-01-31

Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scienti c distributed applications [1]. The survey established, arguably for the rst time, the relationship between infrastructure and scienti c distributed applications. It examined well known contributors to the complexity associated with infrastructure, such as inconsistent internal and external interfaces, and demonstrated the correlation with application brittleness. It discussed how infrastructure complexity reinforces the challenges inherent in developing distributed applications.

Survey of the hypervelocity impact technology and applications.

Energy Technology Data Exchange (ETDEWEB)

Chhabildas, Lalit Chandra; Orphal, Dennis L.

2006-05-01

HVIS 2005 was a clear success. The Symposium brought together nearly two hundred active researchers and students from thirteen countries around the world. The 84 papers presented at HVIS 2005 constitute an ''update'' on current research and the state-of-the-art of hypervelocity science. Combined with the over 7000 pages of technical papers from the eight previous Symposia, beginning in 1986, all published in the International Journal of Impact Engineering, the papers from HVIS 2005 add to the growing body of knowledge and the progressing state-of-the-art of hypervelocity science. It is encouraging to report that even with the limited funding resources compared to two decades ago, creativity and ingenuity in hypervelocity science are alive and well. There is considerable overlap in different disciplines that allows researchers to leverage. Experimentally, higher velocities are now available in the laboratory and are ideally suited for space applications that can be tied to both civilian (NASA) and DoD military applications. Computationally, there is considerable advancement both in computer and modeling technologies. Higher computing speeds and techniques such as parallel processing allow system level type applications to be addressed directly today, much in contrast to the situation only a few years ago. Needless to say, both experimentally and computationally, the ultimate utility will depend on the curiosity and the probing questions that will be incumbent upon the individual researcher. It is quite satisfying that over two dozen students attended the symposium. Hopefully this is indicative of a good pool of future researchers that will be needed both in the government and civilian industries. It is also gratifying to note that novel thrust areas exploring different and new material phenomenology relevant to hypervelocity impact, but a number of other applications as well, are being pursued. In conclusion, considerable progress is still being

Survey method for radiological surveys of 300 FF-1 Operable Unit soil and materials

International Nuclear Information System (INIS)

Greif, A.A.

1997-06-01

This technical basis document is to be used to survey soils at the 300-FF-1 Operable Unit during remediation of the site. Its purpose is to provide a basis for the survey methods to be employed by the Radiological Control Technician to determine if excavated areas require continued remediation in accordance with the Record of Decision for the operable unit

Neutron tomography: A survey and some recent applications

International Nuclear Information System (INIS)

Rhodes, E.A.; Morman, J.A.; McClellan, G.C.

1990-01-01

A survey is given of recent developments in selected areas of neutron tomography, within the context of several applications Argonne is involved in, including high penetration of reactor-fuel bundles in thick containers (involving Transient Reactor Test Facility (TREAT) and NRAD facilities), dual-energy hydrogen imaging (performed at Intense Pulsed Neutron Source), dynamic coarse-resolution emission tomography of reactor fuel under test (a proposed modification to the TREAT hodoscope), and an associated-particle system that uses neutron flight-time to electronically collimate transmitted neutrons and to tomographically image nuclides identified by reaction gamma-rays. 23 refs., 12 figs

Texas Instruments Technical Seminar: Power Management and Wireless

CERN Multimedia

2006-01-01

Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evaluati...

Texas Instruments Technical Seminar: Power Management and Wireless

CERN Multimedia

2006-01-01

Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar: Power Management and Wireless Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) The range of power management products available today offers the possibility to find the best solution for each application. To select the right product it is therefore necessary to understand system requirements, how power supply products work, and where they differentiate. This Technical Training Seminar will also present an overview of how to choose the right RF platform based on markets and applications: nowadays almost everbody has at least one wireless product in use, and this tendency seems to increase significantly. Power Management Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to evalu...

Determining significance in social impact assessments (SIA) by applying both technical and participatory approaches: Methodology development and application in a case study of the concentrated solar power plant NOORO I in Morocco

International Nuclear Information System (INIS)

Terrapon-Pfaff, Julia; Fink, Thomas; Viebahn, Peter; Jamea, El Mostafa

2017-01-01

One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOOR O I in Ouarzazate, Morocco. The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments. - Highlights: •Significance evaluation in social impact assessments lacks participatory aspects. •Combined participatory and technical impact significance evaluation developed •Application in a case study to analyse the livelihood impacts of a CSP plant •Involvement of local stakeholders and technical experts results in robust findings. •Social, cultural and political issues are often more relevant than material aspects.

International survey of living PSA and safety indicators

International Nuclear Information System (INIS)

Holmberg, J.; Laakso, K.; Lehtinen, E.; Bjoere, S.

1992-01-01

The report contains an international overview of applications of living probabilistic assessment and development of operational safety indicators. Features of an ideal living PSA tool are summarized as well as a limited survey of code systems for managing a living probabilistic safety assessment (living PSA) is included. The international survey is used as an input for planning and performance of related tasks within the nordic NKS/SIK-1 project conducted in 1990-93. The research notes are distributed to the Nordic organizations involved or interested in the subject. The report includes an overview and conclusions from technical reports and articles available and presentations and discussions related to development and use of above methods for the evaluation and management of the operational safety of nuclear power plants. A large part of this material is based on material collected and discussed in connection to international specialist meetings relating to the subject

Survey report on energy transportation systems which use hydrogen-occluding alloys; Suiso kyuzo gokin wo riyoshita energy yuso system chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-18

Surveyed are systems which use hydrogen-occluding alloys for, e.g., storing and transporting hydrogen. This project is aimed at development of, and extraction of technical problems involved in, the concept of hydrogen energy transportation cycles for producing hydrogen in overseas countries by electrolysis using clean energy of hydraulic energy which are relatively cheap there; transporting hydrogen stored in a hydrogen-occluding alloy by sea to Japan; and converting it into electrical power to be delivered and used there. The surveyed items include current state of development/utilization of hydraulic power resources in overseas countries; pigeonholing the technical issues involved in the hydrogen transportation cycles, detailed studies thereon, and selection of the transportation cycles; current state of research, development and application of hydrogen-occluding alloys for various purposes; extraction of the elementary techniques for the techniques and systems for the hydrogen transportation systems which use hydrogen-occluding alloys; research themes of the future hydrogen-occluding alloys and the application techniques therefor, and research and development thereof; and legislative measures and safety. (NEDO)

Plasma technology: a technical economical and political challenge

International Nuclear Information System (INIS)

Abreu, V.A. de; Vicente, L.C.; Bender, O.W.; Sanches Junior, O.

1987-01-01

To survey the State of the Art and Technic in Material, Process and Products by Plasma, it was needed to assemble economic, political and managerial variables that will affect the absortion and implantation of this technology in Brazil. Through a survey in industries, universities, research centers, energy agencies and financial and forster institutions it was possible to build a frame that gave us conditions to forecasting and suggest some mesures to Plasma sector. (author) [pt

Research Reactor Application for Materials under High Neutron Fluence. Proceedings of an IAEA Technical Meeting (TM-34779)

International Nuclear Information System (INIS)

2011-05-01

Research reactors (RRs) have played, and continue to play, a key role in the development of the peaceful uses of nuclear energy and technology. The role of the IAEA is to assist Member States in the effective utilization of these technologies in various domains of research such as fundamental and applied science, industry, human health care and environmental studies, as well as nuclear energy applications. In particular, material testing reactors (MTRs), serve as unique tools in scientific and technological development and they have quite a wide variety of applications. Today, a large range of different RR designs exist when compared with power reactors and they also have different operating modes, producing high neutron fluxes, which may be steady or pulsed. Recently, an urgent need has arisen for the development of new advanced materials, for example in the nuclear industry, where RRs offer capacities for irradiation programmes. Besides the scientific and research activities and commercial applications, RRs are also used extensively for educational training activities for scientists and engineers. This report is a compilation of outputs of an IAEA Technical Meeting (TM-34779) held on Research Reactor Application for Materials under High Neutron Fluence. The overall objective of the meeting was to review typical applications of small and medium size RRs, such as material characterization and testing, neutron physics and beam research, neutron radiography and imaging as well as isotope production and other types of non-nuclear applications. Several issues were discussed during the meeting, in particular: (1) recent development of irradiation facilities, specific irradiation programmes and their implementation; (2) effective and optimal RR operation regimes for irradiation purposes; (3) sharing of best practices and existing technical knowledge; and (4) fostering of advanced or innovative technologies, e.g. information exchange and effective collaboration. This

Reference data libraries for nuclear applications - ENSDF. Summary report of technical meeting

International Nuclear Information System (INIS)

Balabanski, D.; Nichols, A.L.

2008-11-01

A Technical Meeting on 'Reference Data Libraries for Nuclear Applications - ENSDF' was held on 10- 11 November 2008 at the IAEA Headquarters, Vienna, Austria. All presentations, discussions and recommendations of this meeting are given in this report. The purpose of the meeting was to review and discuss possible new European input to the ENSDF database (Evaluated Nuclear Structure Data File). These inputs are comprehensive mass-chain evaluations that constitute updated recommendations for the nuclear structure and decay data of nuclides assembled on the basis of mass number. A meeting to address declining European effort was endorsed by the International Nuclear Data Committee in April 2008, and judged as essential in order to balance the share of responsibilities around the world for the maintenance of this important database. (author)

Technical Training: C++ for Particle Physicists

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' ...

Technical Training: C++ for Particle Physicists

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' c...

The environmental survey manual

International Nuclear Information System (INIS)

1987-08-01

The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

Real-time three-dimensional speckle tracking echocardiography: technical aspects and clinical applications

Directory of Open Access Journals (Sweden)

Sorrentino R

2016-11-01

Full Text Available Regina Sorrentino, Roberta Esposito, Enrica Pezzullo, Maurizio Galderisi Department of Advanced Biomedical Sciences, Interdepartmental Laboratory of Cardiac Imaging, Federico II University Hospital, Naples, Italy Abstract: Three-dimensional speckle tracking echocardiography (3D STE is a novel technique for the quantification of cardiac deformation based on tracking of ultrasonic speckles in gray scale full-volume 3D images. Developments in ultrasound technologies have made 3D speckle tracking widely available. Two-dimensional echocardiography has intrinsic limitations regarding estimation of left ventricular (LV volumes, ejection fraction, and LV mechanics, due to its inherent foreshortening errors and dependency on geometric models. The development of 3D echocardiography has improved reproducibility and accuracy. Data regarding the feasibility, accuracy, and clinical applications of 3D STE are rapidly assembling. From the tracking results, 3D STE derives several parameters, including longitudinal, circumferential and radial strain, as well as a combined assessment of longitudinal and circumferential strain, termed area strain. 3D STE can also quantify LV rotational movements such as rotation, twist, and torsion. 3D STE provides a better insight on global and regional myocardial deformation. Main applications include detection of subclinical myocardial involvement in heart failure, arterial hypertension, dyssynchrony, and ischemic heart disease. Emerging areas of application include a large spectrum of heart-involving systemic conditions, such as prediction of rejection in heart transplant patients, early detection of cardiotoxicity in patients receiving chemotherapy for cancer, and deeper physiological understanding of LV contraction mechanics in different types of athletes. Aim of this review is to discuss background, technical acquisition and processing aspects as well as recognized and developing clinical applications of this emerging

Job and task analysis for technical staff

International Nuclear Information System (INIS)

Toline, B.C.

1991-01-01

In September of 1989 Cooper Nuclear Station began a project to upgrade the Technical Staff Training Program. This project's roots began by performing job and Task Analysis for Technical Staff. While the industry has long been committed to Job and Task Analysis to target performance based instruction for single job positions, this approach was unique in that it was not originally considered appropriate for a group as diverse as Tech Staff. Much to his satisfaction the Job and Task Analysis Project was much less complicated for Technical Staff than the author had imagined. The benefits of performing the Job and Task Analysis for Technical Staff have become increasingly obvious as he pursues lesson plan development and course revisions. The outline for this presentation will be as follows: philosophy adopted; preparation of the job survey document; performing the job analysis; performing task analysis for technical staff and associated pitfalls; clustering objectives for training and comparison to existing program; benefits now and in the future; final phase (comparison to INPO guides and meeting the needs of non-degreed engineering professionals); and conclusion. By focusing on performance based needs for engineers rather than traditional academics for training the author is confident the future Technical Staff Program will meet the challenges ahead and will exceed requirements for accreditation

FY 2000 report on the survey on the long-term energy technology strategy, etc. - Basement technology for implementation of industrial technology strategy. Survey on the extraction of preferential important technical subjects in FY 2002; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho - sangyo gijutsu senryaku sakutei kiban chosa. 2002 nendo yusenteki juyo gijutsu kadai no chushutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This survey is to investigate the consciousness of researchers and engineers of enterprises, universities, etc, of the importance of about 100 important technical subjects in 'the industrial technology strategy' prepared by the Ministry of Economy, Trade and Industry. In the questionnaire survey, the following were selected: 1)systematization of policy in consideration of the social needs and R and D of the technology to realize it; 2) R and D of the technology to advance the future frontier; 3) technical subjects that the government should promptly start to tackle in each classification in arrangement of the intellectual basis. Answers to the following items were obtained: 'selection reasons' for why it was considered important in each technical subject, 'lead time' toward the time of the industrialization, 'international positioning' of Japan against Western countries, 'possibility of heightening/maintaining the international competitive force,' and 'items that the government should participate in.' In 1), the following four big targets were arranged: 'security/safety,' 'informatization,' 'environment' and 'energy'. In 2), the following technical subjects were arranged: 'biotechnology,' 'information communication technology,' 'production technology,' 'materials/process technology,' 'energy/environment' and 'new blending/traversable/integrated technology.' In the results of the survey, analyzed were big targets, and trends and characteristics at technical field levels. (NEDO)

New usable technical specifications

International Nuclear Information System (INIS)

Webster, S.A.; Tomasi, L.T.; Bernier, R.A.

1989-01-01

After 2 yr of preparation, 1988 finally saw the nuclear industry writing operator-oriented technical specifications. This effort is a continuation of previous efforts to develop improved and usable standard technical specifications (STSs), and is being conducted by the four nuclear steam supply system vendor owners' groups under the auspices of the Nuclear Management Resources Council. Each participant is currently preparing a set of improved STSs based on a writer's guide that was developed through a combined industry effort. In May of 1987, a Human Factors Improvements to Technical Specifications (HFITS) task group was formed to prepare a writer's guide for improved, industrywide STSs. This task group was composed of two representatives from each owners' group, one with a human factors background and one with some operations background. Two documents were prepared in 6 months, a human factors report laying the groundwork for the considerations to go into technical specifications and a writer's guide for their preparation. This paper reports on the application of this writer's guide to the writing of improved STS

Technical training - Places available

CERN Document Server

2012-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

Technical Training: CLEAN-2002: Working in a Cleanroom

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

76 FR 38608 - Sensors and Instrumentation Technical Advisory Committee;

Science.gov (United States)

2011-07-01

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...

Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

CT colonography after colostomy - clinical application and technical feasibility

International Nuclear Information System (INIS)

Nedevska, A.

2013-01-01

Full text:Introduction: The aim of this study was to evaluate the clinical application and technical implementation of computed tomographic (CT ) colonoscopy in patients undergoing sigmoid or rectal resection and following sigmoid colostomy in the course of standard diagnostic postoperative follow-up and prior to the reconstructive colon surgery. Materials and Methods: The study included 48 patients who underwent anterior abdomen-perineal or rectal resection and subsequent sigmoid colostomy in case of sigma or rectum carcinoma. The pre-procedure bowel preparation included a full colon cleansing and barium-based fecal tagging. The balloon catheter (18 F) is placed in the colonic stoma. The balloon is insufflated with 15-30 ml saline or air. The balloon was gently pulled until opening of the stoma has been closed completely. In 15 patients, a second catheter was placed in the remaining rectum. Contrast scanning in supination was done for all patients. An additional scanning in left and right lateral position was necessary for 9 patients. Results: All studies were carried out without any major complications. All patients tolerated the intubation and insufflation of air into the intestinal lumen. Two patients (4%) have evaluated the examination as uncomfortable. In 6 patients (12.5 %) it was impossible to evaluate the intestinal segments because due to a collapse of the wall. Five of them were localized in the descending colon. In 5 patients there was a significant amount of residual intestinal contents. The fecal tagging and intravenous contrast enhancing allowed the assessment of these intestinal segments. The rectal residue was correctly assessed in all patients in terms of length, position and wall changes. Conclusion: CT colonoscopy is applicable after sigmostoma in patients with abdomen-perineal and anterior rectal resection. Further in-depth studies are needed to determine the clinical indications and reliability of the method

Full immersion simulation: validation of a distributed simulation environment for technical and non-technical skills training in Urology.

Science.gov (United States)

Brewin, James; Tang, Jessica; Dasgupta, Prokar; Khan, Muhammad S; Ahmed, Kamran; Bello, Fernando; Kneebone, Roger; Jaye, Peter

2015-07-01

To evaluate the face, content and construct validity of the distributed simulation (DS) environment for technical and non-technical skills training in endourology. To evaluate the educational impact of DS for urology training. DS offers a portable, low-cost simulated operating room environment that can be set up in any open space. A prospective mixed methods design using established validation methodology was conducted in this simulated environment with 10 experienced and 10 trainee urologists. All participants performed a simulated prostate resection in the DS environment. Outcome measures included surveys to evaluate the DS, as well as comparative analyses of experienced and trainee urologist's performance using real-time and 'blinded' video analysis and validated performance metrics. Non-parametric statistical methods were used to compare differences between groups. The DS environment demonstrated face, content and construct validity for both non-technical and technical skills. Kirkpatrick level 1 evidence for the educational impact of the DS environment was shown. Further studies are needed to evaluate the effect of simulated operating room training on real operating room performance. This study has shown the validity of the DS environment for non-technical, as well as technical skills training. DS-based simulation appears to be a valuable addition to traditional classroom-based simulation training. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

Technical management of difference in CEPR nuclear power project

International Nuclear Information System (INIS)

Guo Ruiting

2014-01-01

The Thesis dissertate the application of technical management of difference in CEPR Nuclear Power Project from EPR technical bases, condition of a nuclear power plant site, engineering and procurement, construction, quality management, schedule management and experience feedback aspects. (author)

BASIC TECHNICAL SKILLS (THROWS IN 17-19-YEAR-OLD JUDOKAS

Directory of Open Access Journals (Sweden)

Wladyslaw Jagiello

2014-12-01

Full Text Available Purpose: The purpose of the research was to determine basic technical skills (throws in 17-19-year-old judokas and the level of their performance. Material: The study involved 30 judo athletes (aged 17-19. Results: To determine the athletes’ basic technical skills (throws, an analysis of source materials and a diagnostic survey were used. To determine the level of technical skills, the method of expert assessment was applied. Statistical software package Statistica 8 was used in the statistical analysis. In the coaches’ opinion, 17-19-year-old judokas have a specific, characteristic of this age group, set of basic technical skills (throws aptly defining their technical preparation. Conclusions: The tested group of judokas exhibited the highest level of demonstrating throws of the koshi-waza (hip group, and the lowest one of the ashi-waza (foot group.

Liquid Crystals, PIV and IR-Photography in Selected Technical and Biomedical Applications

Science.gov (United States)

Stasiek, Jan; Jewartowski, Marcin

2017-10-01

Thermochromic liquid crystals (TLC), Particle Image Velocimetry (PIV), Infrared Imaging Themography (IR) and True-Colour Digital Image Processing (TDIP) have been successfully used in non-intrusive technical, industrial and biomedical studies and applications. These four tools (based on the desktop computers) have come together during the past two decades to produce a powerful advanced experimental technique as a judgment of quality of information that cannot be obtained from any other imaging procedure. The brief summary of the history of this technique is reviewed, principal methods and tools are described and some examples are presented. With this objective, a new experimental technique have been developed and applied to the study of heat and mass transfer and for biomedical diagnosis. Automated evaluation allows determining the heat and flow visualisation and locate the area of suspicious tissue of human body.

Introduction into thermodynamics. From elements to technical applications. 13. rev. and enl. ed.

International Nuclear Information System (INIS)

Cerbe, G.; Hoffmann, H.J.

2002-01-01

This textbook has been proved for more than 30 years and has been regularly revised and updated. Thus, recent developments in energy conversion and environmental protection have constantly been taken into account. Tabulated values and standards reflect the current state of things. The book's basic concept was maintained without change from the first to the twelfth edition: leading over from well-founded thermodynamic theory to technical applications, closeness to practice because of many examples with solutions and tasks with solution results, the opportunity for self-study with 130 examples, 135 tasks and 175 control questions with answers, and high usability because of many tables and direct-information diagrams. The 13th edition was actualised and enhanced by combined-cycle power plants and fuel cells. (orig./GL) [de

Preliminary Geological Survey on the Proposed Sites for the New Research Reactor

International Nuclear Information System (INIS)

Lim, In Cheol; Ha, J. J.; Oh, K. B.

2010-12-01

· Performing the preliminary geological survey on the proposed sites for the new research reactor through the technical service · Ordering a technical service from The Geological Society of Korea · Contents of the geological survey - Confirmation of active fault - Confirmation of a large-scale fracture zone or weak zone - Confirmation of inappropriate items related to the underground water - Confirmation of historical seismicity and instrumental earthquakes data · Synthesized analysis and holding a report meeting · Results of the geological survey - Confirmation of the geological characteristics of the sites and drawing the requirements for the precise geological survey in the future

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

TECHNICAL TRAINING: Places available**

CERN Multimedia

2003-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

Disclosure Control using Partially Synthetic Data for Large-Scale Health Surveys, with Applications to CanCORS

OpenAIRE

Loong, Bronwyn; Zaslavsky, Alan M.; He, Yulei; Harrington, David P.

2013-01-01

Statistical agencies have begun to partially synthesize public-use data for major surveys to protect the confidentiality of respondents’ identities and sensitive attributes, by replacing high disclosure risk and sensitive variables with multiple imputations. To date, there are few applications of synthetic data techniques to large-scale healthcare survey data. Here, we describe partial synthesis of survey data collected by CanCORS, a comprehensive observational study of the experiences, treat...

Magnetic materials fundamentals, products, properties, applications

CERN Document Server

Hilzinger, Rainer

2013-01-01

At a practical level, this compendium reviews the basics of soft and hard magnetic materials, discusses the advantages of the different processing routes for the exploitation of the magnetic properties and hence assists in proper, fail-safe and economic application of magnetic materials. Essential guidelines and formulas for the calculation of the magnetic and electrical properties, temperature and long-term stability of permanent magnets, of inductive components and magnetic shielding are compiled. Selected fields of application and case studies illustrate the large diversity of technical applications. Application engineers will appreciate the comprehensive compilation of the properties and detailed characteristic curves of modern soft and hard magnetic materials. Materials scientists will enjoy the presentation of the different processing routes and their impact on the magnetic properties and students will profit from the survey from the basics of magnetism down to the applications in inductive components, ...

Study on surveys and tests at the Tono mines. A fiscal year's report (at 1999 fiscal year). Technical report

International Nuclear Information System (INIS)

2000-04-01

The Tono Geoscience Center of the Japan Nuclear Cycle Development Institute (JNC) has progressed various types of survey and research targeted at new Tertiary sedimentary rocks and bed rock granite distributing from earth surface to about 500 m in depth at and around the Tono mine belonged to Toki-city of Gifu prefecture, as a part of the stratum science research. The survey and research are carried out to aim at understanding on material transfer and delay feature of uranium in the sedimentary rocks with geological characteristics such as dislocation according to the 'Basic plan on survey and testing research at the Tono mine', and their items are survey and testing researches on 1) dynamic stability of rocks, 2) geological environment around road, 3) material transfer in rocks, and 4) the Tsukiyoshi fault. Results obtained in the survey and testing research not only are reflected as a base of the stratum disposal R and D, but also contribute to academic research on deep underground, application of underground space, and so on. For example, a research on sampling and applying of rocks containing uranium helps elucidation on formation of uranium ore deposit and forming process. (G.K.)

A survey on the application of robot techniques to an atomic power plant

International Nuclear Information System (INIS)

Hasegawa, Tsutomu; Sato, Tomomasa; Hirai, Shigeoki; Suehiro, Takashi; Okada, Tokuji

1982-01-01

Tasks of workers in atomic power plants have been surveyed from the viewpoint of necessity and possibility of their robotization. The daily tasks are classified into the following: (1) plant operation; (2) periodical examination; (3) patrol and inspection; (4) in-service inspection; (5) maintenance and repaire; (6) examination and production of the fuel; (7) waste disposal; (8) decommission of the plant. The necessity and present status of the robotization in atomic power plants are investigated according to the following classification: (1) inspection robots; (2) patrol inspection/maintenance robots; (3) hot cell robots; (4) plant decommission robots. The following have been made clear through the survey: (1) Various kinds of tasks are necessary for an atomic power plant: (2) Because of most of the tasks taking place in intense radiation environments, it is necessary to introduce robots into atomic power plants: (3) In application of robots in atomic power plant systems, it is necessary to take account of various severe conditions concerning spatial restrictions, radioactive endurance and reliability. Lastly wide applicability of the techniques of knowledge robots, which operate interactively with men, has been confirmed as a result of the survey. (author)

Non-technical skills for scrub practitioners.

Science.gov (United States)

McClelland, Guy

2012-12-01

The non-technical skills of situational awareness and the formation of effective interpersonal relationships are essential to enhance surgical outcomes. However, most scrub practitioners demonstrate only tacit awareness of these skills and develop such qualities on an informal basis. Application of non-technical skills may be assessed formally, using a structured framework, to transform normative behaviour and to strengthen barriers against the latent threats that may result from fallible humans working in inadequate organisational systems.

A survey on the effects of knowledge management on organizational learning: A case study of technical and vocational training organization

Directory of Open Access Journals (Sweden)

Naser Azad

2014-04-01

Full Text Available This paper presents an empirical investigation to study the effects of knowledge management on organizational learning. The study is held in headquarter of technical and vocational training organization in city of Tehran, Iran. The proposed study measures the effects of concept of management, management, knowledge tools, measurement, change management and knowledge content on organizational learning. The study designs a questionnaire in Likert scale and selects a sample of 313 people randomly from 1680 people who work for this organization in city of Tehran, Iran. Using structural equation modeling, the study has detected a positive and meaningful relationship with knowledge management on organizational learning. In our survey, knowledge content is the most important factor followed by change management.

Canadian wind energy technical and market potential

International Nuclear Information System (INIS)

Templin, R.J.; Rangli, R.S.

1992-01-01

The current status of wind energy technology in Canada is reviewed, the technical potential of wind energy in Canada is estimated, and the economic market potential is assessed under several scenarios over about the next 25 years. The technical potential is seen to be large, with applications to water pumping on farms, the coupling of wind turbines to diesel-electric systems in remote communities where fuel costs are high, and the supply of electricity to main power grids. The main-grid application has greatest technical potential, but it cannot be economically exploited under the present utility buyback rate structure for intermittent power sources. A change in government policy toward market development of renewable energy sources, such as is already taking place in several European countries, would greatly increase market potential, decrease emissions of CO 2 and SO 2 , and benefit the Canadian wind energy industry. 2 figs., 1 tab

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Science.gov (United States)

2010-07-01

... § 518.21 Collection of fees and fee rates for technical data. (a) Fees for technical data. Technical data, other than technical data that discloses critical technology with military or space application... 32 National Defense 3 2010-07-01 2010-07-01 true Collection of fees and fee rates for technical...

Activity Recognition Using Inertial Sensing for Healthcare, Wellbeing and Sports Applications: A Survey

NARCIS (Netherlands)

Avci, A.; Bosch, S.; Marin Perianu, Mihai; Marin Perianu, Raluca; Havinga, Paul J.M.

This paper surveys the current research directions of activity recognition using inertial sensors, with potential application in healthcare, wellbeing and sports. The analysis of related work is organized according to the five main steps involved in the activity recognition process: preprocessing,

SUSTAINING OCCUPATIONAL INFORMATION FOR CAREER CHOICE AND DEVELOPMENT IN STUDENTS OF TECHNICAL COLLEGES IN ENUGU STATE, NIGERIA

OpenAIRE

Moses Ikebe Odo

2015-01-01

This study takes on the issue of sustaining occupational information for career choice and development in students of technical colleges in Enugu State, Nigeria. The method adopted for this study was the survey design and the population included were all final year students of the three government technical colleges in Enugu State of Nigeria. The technical colleges were sampled as follows: Government Technical College, Enugu (156 students); Government Technical College, Nsukka (148 students);...

Visual servoing in medical robotics: a survey. Part II: tomographic imaging modalities--techniques and applications.

Science.gov (United States)

Azizian, Mahdi; Najmaei, Nima; Khoshnam, Mahta; Patel, Rajni

2015-03-01

Intraoperative application of tomographic imaging techniques provides a means of visual servoing for objects beneath the surface of organs. The focus of this survey is on therapeutic and diagnostic medical applications where tomographic imaging is used in visual servoing. To this end, a comprehensive search of the electronic databases was completed for the period 2000-2013. Existing techniques and products are categorized and studied, based on the imaging modality and their medical applications. This part complements Part I of the survey, which covers visual servoing techniques using endoscopic imaging and direct vision. The main challenges in using visual servoing based on tomographic images have been identified. 'Supervised automation of medical robotics' is found to be a major trend in this field and ultrasound is the most commonly used tomographic modality for visual servoing. Copyright © 2014 John Wiley & Sons, Ltd.

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

Science.gov (United States)

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Students’ motivation to fitness classes at technical university

Directory of Open Access Journals (Sweden)

E.P. Balitskaya

2013-06-01

Full Text Available The aim of the study is to determine the motives of students to fitness classes at technical university. The results of the survey of students I - II courses motivation for fitness classes in physical education. The survey involved 182 students (173 girls and 9 boys of technical faculties. Found that most of the students have been studying fitness for entry the university. The main motivation for fitness training is to increase the level of physical fitness and self-confidence, as well as the development of special vocational important physical qualities, which in the future will contribute to the professional activities of the students. It is shown that universities are engaged in fitness in 13.82% of the students. Swimming is the clear leader - 18.37% and athletic gymnastics - 17.19%. Also popular are sports games - 26.77% (football, basketball, volleyball, tennis. Also are visited sections in gymnastics, wrestling, boxing, and tourism.

Proposal on application of Russian technical facilities for International Mars Research Program for 2009 2015

Science.gov (United States)

Polishchuk, Georgy; Pichkhadze, Konstantin; Vorontsov, Victor; Pavel, Kazmerchuk

2006-07-01

Recently International Mars Research Program is widely discussed. Well-known initiative of President of the USA, recent progress of American and European scientists and engineers in implementation of “Mars Odyssey” and “Mars-Express” projects and Russian proposals on cooperation and participation in “Phobos Sample Return” mission declare every intention to join efforts in the ambitious Martian Program realization. The final goal of the program for nearly 15 20 years is landing of a man on the Martian surface. Before this event happens another critical stage will be Martian soil sample return. Within the next 10 years, apparently, a major task will be scale research by means of various types of technical facilities. A crucial issue for this research will be creation of research station network which would allow collecting information about planetary conditions at far-remote points. By this time within the frame of “Phobos Sample Return Program” to be launched in 2009 it is planned to deliver some meteorological mini-landers developed by the Russian and Finnish specialists on the Martian surface. From this point view it is also interesting to use balloons capable to cover considerable distance. Such proposals have been made by Russian side for “Scout” mission. European “Aurora” program also anticipates application of wide range of technical means to explore the Martian atmosphere and surface including inflatable devices. Thus, for the International Mars Exploration Program, it seems to be very prospective to use apart from launch vehicles, upper stages etc. such technical means as mini-stations, Mars rovers, penetrators, balloons, etc.

Teaching non-technical (professional) competence in a veterinary school curriculum.

Science.gov (United States)

Burns, Gilbert A; Ruby, Kathleen L; Debowes, Richard M; Seaman, Susan J; Brannan, Julia K

2006-01-01

Data from focused studies and comprehensive surveys suggest that developing or enhancing non-technical (professional) skills will result in a more satisfied and successful veterinary student or veterinary graduate. The College of Veterinary Medicine at Washington State University has devoted considerable time, effort, and resources to augmenting the non-technical aspects of its curriculum while maintaining the traditional strengths of its DVM program. Here we summarize pertinent research and best-practice recommendations from a variety of sources and outline the steps that have been taken, with the underlying rationales, to integrate the teaching and modeling of non-technical (professional) competence throughout a four-year course of veterinary study.

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

Science.gov (United States)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

Standard technical specifications for Babcock and Wilcox pressurized water reactors. Revision 4. Technical report

International Nuclear Information System (INIS)

Virgilio, M.J.

1980-10-01

The Standard Technical Specifications for Babcock and Wilcox Pressurized Water Reactors (BandW-STS) is a generic document prepared by the U.S. NRC for use in the licensing process. The BandW-STS provide applicants with model specifications to be used in formulation plant-specific technical specifications required by 10 CFR Part 50, Section 50.36, which set forth the specific characteristics of the facility and the conditions for its operation that are required to provide adequate protection to the health and safety of the public. This document is revised periodically to reflect current licensing requirements

[A study of the occupational stress norm and it' s application for the technical group and scientific research group].

Science.gov (United States)

Yang, Xin-wei; Liu, Ze-jun; Zhao, Pei-qing; Bai, Shao-ying; Pang, Xing-huo; Wang, Zhi-ming; Jin, Tai-yi; Lan, Ya-jia

2006-11-01

A study of the occupational stress norm and it' s application for the technical group and scientific research group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets(235 scientific research group, 857 technical group). Descriptive statistics for OSI-R scale scores for the technical group and scientific research group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for technical group and scientific research group were established. OSI-R profile from for technical group and scientific research group were established. For the ORQ and PSQ scales, scores at or above 70T indicate a strong levels of maladaptive stress and strain. Score in the range of 60T to 69T suggest middle levels of maladaptive stress and strain. Score in the range of 40T to 59T indicate normal levels of stress and strain. Score below 40T indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30T indicate a significant lack of coping resources. Score in the range of 30T to 39T suggest middle deficits in coping resources. Score in the range of 40T to 59T indicate average coping resources. Scores at or above 60T indicate a strong levels of coping resources. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

Food irradiation. Technical and legal aspects

International Nuclear Information System (INIS)

Vas, K.

1978-01-01

This document presents a brief technical discussion on a new major technique for food preservation and points out the necessary harmonization of national regulations to give them a broader application field [fr

Authorization Decree Application for the creation of the Flamanville-3 Basic Nuclear Installation. Executive Summary of the Technical Review

International Nuclear Information System (INIS)

2009-01-01

On 9 May 2006, Electricite de France (EDF) submitted to the Ministers for Nuclear Safety an authorization decree application for an EPR-type reactor on the site of the Flamanville Nuclear Power Plant (NPP). Article 29 of Act No. 2006-686 of 13 June 2006 on Transparency and Security in the Nuclear Field prescribes that the creation of any basic nuclear installation shall be issued by a decree taken after consultation with the Nuclear Safety Authority (Autorite de surete nucleaire - ASN). The purpose of this report is to provide ASN's Board with a summary of the technical review led by ASN services and carried out by their technical support agencies, namely the IRSN, the GPR and the Standing Nuclear Section of the CCAP between 2001 and 2006. After summing up the conclusions of the review on the safety options of the European Pressurized Reactor (EPR) Project, as carried out between 1993 and 2000, this report describes the process and modalities of the review conducted from 2001 to 2006. Besides providing the opinion of ASN's services on the creation-licence application, it also outlines the further review to be carried out, if the authorization decree is issued. (authors)

Who should be undertaking population-based surveys in humanitarian emergencies?

Directory of Open Access Journals (Sweden)

Spiegel Paul B

2007-06-01

Full Text Available Abstract Background Timely and accurate data are necessary to prioritise and effectively respond to humanitarian emergencies. 30-by-30 cluster surveys are commonly used in humanitarian emergencies because of their purported simplicity and reasonable validity and precision. Agencies have increasingly used 30-by-30 cluster surveys to undertake measurements beyond immunisation coverage and nutritional status. Methodological errors in cluster surveys have likely occurred for decades in humanitarian emergencies, often with unknown or unevaluated consequences. Discussion Most surveys in humanitarian emergencies are done by non-governmental organisations (NGOs. Some undertake good quality surveys while others have an already overburdened staff with limited epidemiological skills. Manuals explaining cluster survey methodology are available and in use. However, it is debatable as to whether using standardised, 'cookbook' survey methodologies are appropriate. Coordination of surveys is often lacking. If a coordinating body is established, as recommended, it is questionable whether it should have sole authority to release surveys due to insufficient independence. Donors should provide sufficient funding for personnel, training, and survey implementation, and not solely for direct programme implementation. Summary A dedicated corps of trained epidemiologists needs to be identified and made available to undertake surveys in humanitarian emergencies. NGOs in the field may need to form an alliance with certain specialised agencies or pool technically capable personnel. If NGOs continue to do surveys by themselves, a simple training manual with sample survey questionnaires, methodology, standardised files for data entry and analysis, and manual for interpretation should be developed and modified locally for each situation. At the beginning of an emergency, a central coordinating body should be established that has sufficient authority to set survey standards

Internal dosimetry technical basis manual

International Nuclear Information System (INIS)

1990-01-01

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs

Internal dosimetry technical basis manual

Energy Technology Data Exchange (ETDEWEB)

1990-12-20

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

Technical training: places available

CERN Document Server

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

Preparation of radiological effluent technical specifications for nuclear power plants. a guidance manual for users of standard technical specifications

International Nuclear Information System (INIS)

Boegli, J.S.; Bellamy, R.R.; Britz, W.L.; Waterfield, R.L.

1978-10-01

The purpose of this manual is to describe methods found acceptable to the staff of the U.S. Nuclear Regulatory Commission (NRC) for the calculation of certain key values required in the preparation of proposed radiological effluent Technical Specifications using the Standard Technical Specifications for light-water-cooled nuclear power plants. This manual also provides guidance to applicants for operating licenses for nuclear power plants in the preparation of proposed radiological effluent Technical Specifications or in preparing requests for changes to existing radiological effluent Technical Specifications for operating licenses. The manual additionally describes current staff positions on the methodology for estimating radiation exposure due to the release of radioactive materials in effluents and on the administrative control of radioactive waste treatment systems

North Carolina Geological Survey's role in siting a low-level radioactive (LLRW) waste disposal facility in North Carolina

International Nuclear Information System (INIS)

Reid, J.C.; Wooten, R.M.; Farrell, K.M.

1993-01-01

The Southeast Compact Commission in 1986 selected North Carolina to host the Southeast's LLRW disposal facility for the next twenty years. The North Carolina Geological Survey (NCGS) for six years has played a major role in the State's efforts by contributing to legislation and administrative code, policy, technical oversight and surveillance and regulation as a member of the State's regulatory team. Future activities include recommendation of the adequacy of characterization and site performance pursuant to federal code, state general statutes and administrative code, and review of a license application. Staff must be prepared to present testimony and professional conclusions in court. The NCGS provides technical advice to the Division of Radiation Protection (DRP), the regulatory agency which will grant or deny a LLRW license. The NCGS has not participated in screening the state for potential sites to minimize bias. The LLRW Management Authority, a separate state agency siting the LLRW facility, hired a contractor to characterize potential sites and to write a license application. Organizational relationships enable the NCGS to assist the DRP in its regulatory role without conflict of interest. Disposal facilities must be sited to ensure safe disposal of LLRW. By law, the siting of a LLRW disposal facility is primarily a geological, rather than an engineering, effort. Federal and State statutes indicate a site must be licensable on its own merits. Engineered barriers cannot make a site licensable. The project is 3 years behind schedule and millions of dollars over budget. This indicates the uncertainty and complexity inherent in siting such as facility, the outcome of which cannot be predicted until site characterization is complete, the license application reviewed and the performance assessment evaluated. State geological surveys are uniquely qualified to overview siting of LLRW facilities because of technical expertise and experience in the state's geology

A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications

Directory of Open Access Journals (Sweden)

Yudong Zhang

2015-01-01

Full Text Available Particle swarm optimization (PSO is a heuristic global optimization method, proposed originally by Kennedy and Eberhart in 1995. It is now one of the most commonly used optimization techniques. This survey presented a comprehensive investigation of PSO. On one hand, we provided advances with PSO, including its modifications (including quantum-behaved PSO, bare-bones PSO, chaotic PSO, and fuzzy PSO, population topology (as fully connected, von Neumann, ring, star, random, etc., hybridization (with genetic algorithm, simulated annealing, Tabu search, artificial immune system, ant colony algorithm, artificial bee colony, differential evolution, harmonic search, and biogeography-based optimization, extensions (to multiobjective, constrained, discrete, and binary optimization, theoretical analysis (parameter selection and tuning, and convergence analysis, and parallel implementation (in multicore, multiprocessor, GPU, and cloud computing forms. On the other hand, we offered a survey on applications of PSO to the following eight fields: electrical and electronic engineering, automation control systems, communication theory, operations research, mechanical engineering, fuel and energy, medicine, chemistry, and biology. It is hoped that this survey would be beneficial for the researchers studying PSO algorithms.

Health condition and residual life of deteriorating technical systems

Energy Technology Data Exchange (ETDEWEB)

Reinertsen, Rune

1998-12-31

Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of `technical health` to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

Health condition and residual life of deteriorating technical systems

Energy Technology Data Exchange (ETDEWEB)

Reinertsen, Rune

1997-12-31

Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of `technical health` to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

A literature survey on numerical heat transfer

Science.gov (United States)

Shih, T. M.

1982-12-01

Technical papers in the area of numerical heat transfer published from 1977 through 1981 are reviewed. The journals surveyed include: (1) ASME Journal of Heat Transfer, (2) International Journal of Heat and Mass Transfer, (3) AIAA Journal, (4) Numerical Heat Transfer, (5) Computers and Fluids, (6) International Journal for Numerical Methods in Engineering, (7) SIAM Journal of Numerical Analysis, and (8) Journal of Computational Physics. This survey excludes experimental work in heat transfer and numerical schemes that are not applied to equations governing heat transfer phenomena. The research work is categorized into the following areas: (A) conduction, (B) boundary-layer flows, (C) momentum and heat transfer in cavities, (D) turbulent flows, (E) convection around cylinders and spheres or within annuli, (F) numerical convective instability, (G) radiation, (H) combustion, (I) plumes, jets, and wakes, (J) heat transfer in porous media, (K) boiling, condensation, and two-phase flows, (L) developing and fully developed channel flows, (M) combined heat and mass transfer, (N) applications, (O) comparison and properties of numerical schemes, and (P) body-fitted coordinates and nonuniform grids.

77 FR 47501 - Applications for New Awards; Technical Assistance on State Data Collection, Analysis, and...

Science.gov (United States)

2012-08-08

... Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... for New Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA... Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on...

Stirling engine application study

Science.gov (United States)

Teagan, W. P.; Cunningham, D.

1983-01-01

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

[Application of digital earth technology in research of traditional Chinese medicine resources].

Science.gov (United States)

Liu, Jinxin; Liu, Xinxin; Gao, Lu; Wei, Yingqin; Meng, Fanyun; Wang, Yongyan

2011-02-01

This paper describes the digital earth technology and its core technology-"3S" integration technology. The advance and promotion of the "3S" technology provide more favorable means and technical support for Chinese medicine resources survey, evaluation and appropriate zoning. Grid is a mature and popular technology that can connect all kinds of information resources. The author sums up the application of digital earth technology in the research of traditional Chinese medicine resources in recent years, and proposes the new method and technical route of investigation in traditional Chinese medicine resources, traditional Chinese medicine zoning and suitability assessment by combining the digital earth technology and grid.

Improvement of nuclear reactor component materials by application of hot isostatic processing (HIP). Survey report on Phase 1

International Nuclear Information System (INIS)

Mueller, J.J.

1975-12-01

The report summarizes the results of an EPRI-sponsored state-of-the-art survey of hot isostatic processing (HIP). The purpose of the study was to identify potential nuclear plant applications of HIP with high pay-off through improvement in component quality and reliability. The survey shows that HIP will reduce cost and manufacturing time and improve quality and ease of nondestructive examination of all castings for which porosity is a problem. Nuclear valves are a prime example. Tubing, pipe, and sheet and bar present other possibilities of somewhat less immediate promise. This report includes a review of some of the EPRI motivations for undertaking this research; a brief explanation of HIP, the survey methodology exployed; the basic operations in the processes studied; a review of the historical applications of HIP to problem areas consistent with those addressed in the survey; the results of the survey and associated analyses of the problems; and the recommendations and justifications for the Phase II program

Marvels of modern electronics a survey

CERN Document Server

Lunt, Barry

2013-01-01

This reader-friendly survey focuses on innovations of the past 40 years, including computers, integrated circuits, the Internet, cell phones, GPS, optical fibers, and more. Engaging, mildly technical, authoritative treatment. 2013 edition.

TurboTech Technical Evaluation Automated System

Science.gov (United States)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Dual- and Multi-Energy CT: Principles, Technical Approaches, and Clinical Applications

Science.gov (United States)

Leng, Shuai; Yu, Lifeng; Fletcher, Joel G.

2015-01-01

In x-ray computed tomography (CT), materials having different elemental compositions can be represented by identical pixel values on a CT image (ie, CT numbers), depending on the mass density of the material. Thus, the differentiation and classification of different tissue types and contrast agents can be extremely challenging. In dual-energy CT, an additional attenuation measurement is obtained with a second x-ray spectrum (ie, a second “energy”), allowing the differentiation of multiple materials. Alternatively, this allows quantification of the mass density of two or three materials in a mixture with known elemental composition. Recent advances in the use of energy-resolving, photon-counting detectors for CT imaging suggest the ability to acquire data in multiple energy bins, which is expected to further improve the signal-to-noise ratio for material-specific imaging. In this review, the underlying motivation and physical principles of dual- or multi-energy CT are reviewed and each of the current technical approaches is described. In addition, current and evolving clinical applications are introduced. © RSNA, 2015 PMID:26302388

Critical Success Factors for the Large-Scale Introduction of Grid-Connected Photovoltaic Systems. A survey focusing on the non-technical aspects

International Nuclear Information System (INIS)

Groenendaal, B.J.; De Lange, T.J.; Lako, P.; Van Roosmalen, J.A.M.; Tool, C.J.J.; De Wild-Scholten, M.J.

2000-11-01

The differences in Significance and Status of 15 factors that might be of decisive influence in achieving a large-scale market introduction of grid-connected photovoltaic (PV) systems are analyzed. As a research method the opinions of PV experts and persons involved in the implementation of PV have been surveyed. A questionnaire was sent to about 300 persons all over the world (America, Europe and Asia). The methods applied to analyze the returned questionnaires can be divided into a comparing method (Mann-Whitney test) and ranking methods (Friedman test and the Medal-Classification test). One of the main conclusion is that the ranking of the main critical success factors on Significance shows no large differences between the American and European respondents. The answers from the American and European respondents show that the technical and financial factors are the most Significant: RD and D, technical reliability, financing and cost reduction. The Asian ranking does differ from the American and European ranking. The answers from the Asian respondents show that the international factors: global developments and internationalisation together with specialist knowledge and image are the most Significant success factors. Another main conclusion is that the three regions differ in the ranking of the actual Status of the factors. A comparison of the American ranking with the Asian ranking show the largest differences, whereas Europe is taking an intermediary position. Another interesting observation is that the Status of factors, e.g. internationalisation, global developments and the technical/commercial network, are considered more positive in America, whereas Asia and Europe are more positive about the factors RD and D, image and financing. More specific conclusions show that there is a significant difference in answers between the American and European respondents about the Significance of the factor cost reduction. There is also a significant difference between the

A technical survey of power generation from biogas

International Nuclear Information System (INIS)

1996-01-01

The objectives of this survey are: to review the use of biogas (ie landfill gas, sewage gas and farm gas) for power generation, mainly in the UK. To assess the performance of prime movers and the status and need for biogas pre-treatment. To review legislation with regard to emissions both in the UK and overseas. To provide a framework of good practice for choosing prime movers fuelled by biogas. (author)

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

Technical Training: Places Available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

Technical Training: Places available**

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

TECHNICAL TRAINING: Places available**

CERN Multimedia

2003-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

Technical Note: Example of the Application of Jet Grouting to the Neutralisation of Geotechnical Hazard in Shaft Structures

Directory of Open Access Journals (Sweden)

Dybeł Piotr

2015-09-01

Full Text Available The article presents a geotechnical hazard neutralisation technology for shaft structures. The diagnosis of problems with uncontrolled subsidence of the ventilation duct provided by the authors enabled the development of a schedule of works required for the protection and reinforcement of foundation soil in the shaft area. The technology of protection works was selected after the analysis of the technical condition of shaft structures as well as hydrological and geomechanical conditions. Due to the closeness of the shaft lining, it was necessary to form grout columns using jet grouting and low-pressure grouting technologies. The article presents the issues related to the selected technology and its application to the neutralisation of the emergent geotechnical hazard. The method of performance of recommended works was also described together with their impact on the technical condition of structures discussed as well as their functionality and usage.

Examining the Role of Transformational Leadership in Technology Adoption: Evidence from Bruneian Technical & Vocational Establishments (TVE)

Science.gov (United States)

Seyal, Afzaal H.

2015-01-01

This pioneering study discusses the thirty-five Bruneian technical & vocational institutions of top management (principals, deputy principals, senior masters, ICT coordinators and technical administrators) leadership style with the adoption of Information and Communication Technologies (ICT). The study uses a survey approach further to…

MDEP VICWG-02 Technical Report - Survey on quality assurance program requirements

International Nuclear Information System (INIS)

2011-01-01

The survey was prepared using the requirements of Appendix B to 10 CFR Part 50, 'Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants'. These requirements form the basis upon which the U.S. NRC oversees the activities of vendors providing parts and services to the commercial U.S. nuclear power industry. As discussed and agreed to at the October 2008 Vendor Inspection Cooperation Working Group meeting in Dijon, France, the survey that follows was developed using these requirements. The survey is divided into the 18 basic criteria of Appendix B to 10 CFR Part 50. Within each criteria there are individual requirements that have been identified as separate and distinct elements that are covered during the inspection of vendor activities. In addition to the requirements of Appendix B to 10 CFR Part 50, the requirements of 10 CFR Part 21, 'Reporting of Defects and Non-compliance', have been listed at the end of the survey as an example of 'Other Requirements Related To Vendor Inspections', for the NRC. (authors)

Human mobility: Models and applications

Science.gov (United States)

Barbosa, Hugo; Barthelemy, Marc; Ghoshal, Gourab; James, Charlotte R.; Lenormand, Maxime; Louail, Thomas; Menezes, Ronaldo; Ramasco, José J.; Simini, Filippo; Tomasini, Marcello

2018-03-01

Recent years have witnessed an explosion of extensive geolocated datasets related to human movement, enabling scientists to quantitatively study individual and collective mobility patterns, and to generate models that can capture and reproduce the spatiotemporal structures and regularities in human trajectories. The study of human mobility is especially important for applications such as estimating migratory flows, traffic forecasting, urban planning, and epidemic modeling. In this survey, we review the approaches developed to reproduce various mobility patterns, with the main focus on recent developments. This review can be used both as an introduction to the fundamental modeling principles of human mobility, and as a collection of technical methods applicable to specific mobility-related problems. The review organizes the subject by differentiating between individual and population mobility and also between short-range and long-range mobility. Throughout the text the description of the theory is intertwined with real-world applications.

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2008

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-09-15

This report presents the results of the 14{sup th} international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2008 and analyzes trends in the implementation of PV power systems between 1992 and 2008. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to{+-}10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2008

International Nuclear Information System (INIS)

2009-09-01

This report presents the results of the 14 th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2008 and analyzes trends in the implementation of PV power systems between 1992 and 2008. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to±10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

Technical Basis - Spent Nuclear Fuels (SNF) Project Radiation and Contamination Trending Program

International Nuclear Information System (INIS)

ELGIN, J.C.

2000-01-01

This report documents the technical basis for the Spent Nuclear Fuel (SNF) Program radiation and contamination trending program. The program consists of standardized radiation and contamination surveys of the KE Basin, radiation surveys of the KW basin, radiation surveys of the Cold Vacuum Drying Facility (CVD), and radiation surveys of the Canister Storage Building (CSB) with the associated tracking. This report also discusses the remainder of radiological areas within the SNFP that do not have standardized trending programs and the basis for not having this program in those areas

Results of the 2004 Knowledge and Opinions Surveys for the Baseline Knowledge Assessment of the U.S. Department of Energy Hydrogen Program

Energy Technology Data Exchange (ETDEWEB)

Schmoyer, Richard L [ORNL; Truett, Lorena Faith [ORNL; Cooper, Christy [U.S. Department of Energy

2006-04-01

The U.S. Department of Energy (DOE) Hydrogen Program focuses on overcoming critical barriers to the widespread use of hydrogen fuel cell technology. The transition to a new, hydrogen-based energy economy requires an educated human infrastructure. With this in mind, the DOE Hydrogen Program conducted statistical surveys to measure and establish baselines for understanding and awareness about hydrogen, fuel cells, and a hydrogen economy. The baseline data will serve as a reference in designing an education program, and it will be used in comparisons with future survey results (2008 and 2011) to measure changes in understanding and awareness. Scientific sampling was used to survey four populations: (1) the general public, ages 18 and over; (2) students, ages 12-17; (3) state and local government officials; and (4) potential large-scale hydrogen users. It was decided that the survey design should include about 1,000 individuals in each of the general public and student categories, about 250 state and local officials, and almost 100 large-scale end users. The survey questions were designed to accomplish specific objectives. Technical questions measured technical understanding and awareness of hydrogen technology. Opinion questions measured attitudes about safety, cost, the environment, and convenience, as well as the likelihood of future applications of hydrogen technology. For most of the questions, "I don't know" or "I have no opinion" were acceptable answers. Questions about information sources assessed how energy technology information is received. The General Public and Student Survey samples were selected by random digit dialing. Potential large-scale end users were selected by random sampling. The State and Local Government Survey was of the entire targeted population of government officials (not a random sample). All four surveys were administered by computer-assisted telephone interviewing (CATI). For each population, the length of the survey was less than

Dealer Group or Financial Planning Group? A Brief Technical Note

Directory of Open Access Journals (Sweden)

Lujer Santacruz

2011-06-01

Full Text Available This technical note examines whether the industry practice of using the term dealer group when referring to afinancial planning group contributes to the general perception that financial advisers are not objective whenmaking financial product recommendations. An experimental design carried out through an online survey isused. This is supplemented by a direct comparison survey on the two terminologies. The results provide acase for the industry to adopt a new terminology.

Survey of industrial radioisotope savings

International Nuclear Information System (INIS)

1965-01-01

Only three decades after the discovery of artificial radioactivity and two after radioisotopes became available in quantity, methods employing these as sources or tracers have found widespread use, not only in scientific research, but also in industrial process and product control. The sums spent by industry on these new techniques amount to millions of dollars a year. Realizing the overall attitude of industry to scientific progress - to accept only methods that pay relatively quickly - one can assume that the economic benefits must be of a still larger order of magnitude. In order to determine the extent to which radioisotopes are in daily use and to evaluate the economic benefits derived from such use, IAEA decided to make an 'International Survey on the Use of Radioisotopes in Industry'. In 1962, the Agency invited a number of its highly industrialized Member States to participate in this Survey. Similar surveys had been performed in various countries in the 1950's. However, the approaches and also the definition of the economic benefits differed greatly from one survey to another. Hence, the Agency's approach was to try to persuade all countries to conduct surveys at the same time, concerning the same categories of industries and using the same terms of costs, savings, etc. In total, 24 Member States of the Agency agreed to participate in the survey and in due course they submitted contributions. The national reports were discussed at a 'Study Group Meeting on Radioisotope Economics', convened in Vienna in March 1964. Based upon these discussions, the national reports have been edited and summarized. A publication showing the administration of the Survey and providing all details is now published by the Agency. From the publication it is evident that in general the return of technical information was quite high, of the order of 90%, but, unfortunately the economic response was much lower. However, most of the reports had some bearing on the economic aspects

The Hyper Suprime-Cam SSP Survey: Overview and survey design

Science.gov (United States)

Aihara, Hiroaki; Arimoto, Nobuo; Armstrong, Robert; Arnouts, Stéphane; Bahcall, Neta A.; Bickerton, Steven; Bosch, James; Bundy, Kevin; Capak, Peter L.; Chan, James H. H.; Chiba, Masashi; Coupon, Jean; Egami, Eiichi; Enoki, Motohiro; Finet, Francois; Fujimori, Hiroki; Fujimoto, Seiji; Furusawa, Hisanori; Furusawa, Junko; Goto, Tomotsugu; Goulding, Andy; Greco, Johnny P.; Greene, Jenny E.; Gunn, James E.; Hamana, Takashi; Harikane, Yuichi; Hashimoto, Yasuhiro; Hattori, Takashi; Hayashi, Masao; Hayashi, Yusuke; Hełminiak, Krzysztof G.; Higuchi, Ryo; Hikage, Chiaki; Ho, Paul T. P.; Hsieh, Bau-Ching; Huang, Kuiyun; Huang, Song; Ikeda, Hiroyuki; Imanishi, Masatoshi; Inoue, Akio K.; Iwasawa, Kazushi; Iwata, Ikuru; Jaelani, Anton T.; Jian, Hung-Yu; Kamata, Yukiko; Karoji, Hiroshi; Kashikawa, Nobunari; Katayama, Nobuhiko; Kawanomoto, Satoshi; Kayo, Issha; Koda, Jin; Koike, Michitaro; Kojima, Takashi; Komiyama, Yutaka; Konno, Akira; Koshida, Shintaro; Koyama, Yusei; Kusakabe, Haruka; Leauthaud, Alexie; Lee, Chien-Hsiu; Lin, Lihwai; Lin, Yen-Ting; Lupton, Robert H.; Mandelbaum, Rachel; Matsuoka, Yoshiki; Medezinski, Elinor; Mineo, Sogo; Miyama, Shoken; Miyatake, Hironao; Miyazaki, Satoshi; Momose, Rieko; More, Anupreeta; More, Surhud; Moritani, Yuki; Moriya, Takashi J.; Morokuma, Tomoki; Mukae, Shiro; Murata, Ryoma; Murayama, Hitoshi; Nagao, Tohru; Nakata, Fumiaki; Niida, Mana; Niikura, Hiroko; Nishizawa, Atsushi J.; Obuchi, Yoshiyuki; Oguri, Masamune; Oishi, Yukie; Okabe, Nobuhiro; Okamoto, Sakurako; Okura, Yuki; Ono, Yoshiaki; Onodera, Masato; Onoue, Masafusa; Osato, Ken; Ouchi, Masami; Price, Paul A.; Pyo, Tae-Soo; Sako, Masao; Sawicki, Marcin; Shibuya, Takatoshi; Shimasaku, Kazuhiro; Shimono, Atsushi; Shirasaki, Masato; Silverman, John D.; Simet, Melanie; Speagle, Joshua; Spergel, David N.; Strauss, Michael A.; Sugahara, Yuma; Sugiyama, Naoshi; Suto, Yasushi; Suyu, Sherry H.; Suzuki, Nao; Tait, Philip J.; Takada, Masahiro; Takata, Tadafumi; Tamura, Naoyuki; Tanaka, Manobu M.; Tanaka, Masaomi; Tanaka, Masayuki; Tanaka, Yoko; Terai, Tsuyoshi; Terashima, Yuichi; Toba, Yoshiki; Tominaga, Nozomu; Toshikawa, Jun; Turner, Edwin L.; Uchida, Tomohisa; Uchiyama, Hisakazu; Umetsu, Keiichi; Uraguchi, Fumihiro; Urata, Yuji; Usuda, Tomonori; Utsumi, Yousuke; Wang, Shiang-Yu; Wang, Wei-Hao; Wong, Kenneth C.; Yabe, Kiyoto; Yamada, Yoshihiko; Yamanoi, Hitomi; Yasuda, Naoki; Yeh, Sherry; Yonehara, Atsunori; Yuma, Suraphong

2018-01-01

Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2-m Subaru telescope on the summit of Mauna Kea in Hawaii. A team of scientists from Japan, Taiwan, and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg2 in five broad bands (grizy), with a 5 σ point-source depth of r ≈ 26. The Deep layer covers a total of 26 deg2 in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg2). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.

Technology survey of electrical power generation and distribution for MIUS application

Science.gov (United States)

Gill, W. L.; Redding, T. E.

1975-01-01

Candidate electrical generation power systems for the modular integrated utility systems (MIUS) program are described. Literature surveys were conducted to cover both conventional and exotic generators. Heat-recovery equipment associated with conventional power systems and supporting equipment are also discussed. Typical ranges of operating conditions and generating efficiencies are described. Power distribution is discussed briefly. Those systems that appear to be applicable to MIUS have been indicated, and the criteria for equipment selection are discussed.

Applicability of Socio-Technical Model (STM in Working System of Modern Organizations

Directory of Open Access Journals (Sweden)

Rosmaini Tasmin

2011-10-01

Full Text Available Knowledge has been identified as one of the most important resources in organization that contributes to competitive advantages. Organizations around the world realize and put into practice an approach that bases on technological and sociological aspects to fill-up the gaps in their workplaces. The Socio-Technical Model (STM is an established organizational model introduced by Trist since 1960s at Tavistock Institute, London. It relates two most common components exist in all organizations, namely social systems (human and technological systems (information technology, machinery and equipment in organizations over many decades. This paper reviews the socio-technical model from various perspectives of its developmental stages and ideas written by researchers. Therefore, several literature reviews on socio-technical model have been compiled and discussed to justify whether its basic argument matches with required practices in Techno-Social environments. Through a socio-technical perspective on Knowledge Management, this paper highlights the interplay between social systems and technological system. It also suggests that management and leadership play critical roles in establishing the techno-social perspective for the effective assimilation of Knowledge Management practices.

Optical Science: Deploying Technical Concepts and Engaging Participation through Digital Storytelling

Science.gov (United States)

Thomas, R. G.; Berry, K.; Arrigo, J.; Hooper, R. P.

2013-12-01

Technical 'hands-on' training workshops are designed to bring together scientists, technicians, and program managers from universities, government agencies, and the private sector to discuss methods used and advances made in instrumentation and data analysis. Through classroom lectures and discussions combined with a field-day component, hands-on workshop participants get a 'full life cycle' perspective from instrumentation concepts and deployment to data analysis. Using film to document this process is becoming increasingly more popular, allowing scientists to add a story-telling component to their research. With the availability of high-quality and low priced professional video equipment and editing software, scientists are becoming digital storytellers. The science video developed from the 'hands-on' workshop, Optical Water Quality Sensors for Nutrients: Concepts, Deployment, and Analysis, encapsulates the objectives of technical training workshops for participants. Through the use of still photography, video, interviews, and sound, the short video, An Introduction to CUAHSI's Hands-on Workshops, produced by a co-instructor of the workshop acts as a multi-purpose tool. The 10-minute piece provides an overview of workshop field day activities and works to bridge the gap between classroom learning, instrumentation application and data analysis. CUAHSI 'hands-on' technical workshops have been collaboratively executed with faculty from several universities and with the U.S. Geological Survey. The video developed was designed to attract new participants to these professional development workshops, to stimulate a connection with the environment, to act as a workshop legacy resource, and also serve as a guide for prospective hands-on workshop organizers. The effective use of film and short videos in marketing scientific programs, such as technical trainings, allows scientists to visually demonstrate the technologies currently being employed and to provide a more

Human research ethics committees in technical universities.

Science.gov (United States)

Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

2014-07-01

Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

Basic concepts for crew resource management and non-technical skills.

Science.gov (United States)

Flin, Rhona; Maran, Nikki

2015-03-01

In this paper, we explain the conceptual background to non-technical skills and show how they can influence job performance in anaesthesia. We then describe the taxonomy of anaesthetists' non-technical skills (ANTS) and related systems, such as ANTS-AP for anaesthetic practitioners. We discuss the training courses that have been designed to teach these non-technical skills, which are called crew resource management (CRM), crisis resource management (CRM) or crisis avoidance resource management (CARMA). Finally, we discuss the application of non-technical skills assessment systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 62509 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

Science.gov (United States)

2010-10-12

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Technical Advisory Committees; Notice of Recruitment of Private- Sector Members SUMMARY: Seven Technical Advisory Committees (TACs) advise the Department of Commerce on the technical parameters for export controls applicable to dual-use commodities and...

77 FR 2271 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

Science.gov (United States)

2012-01-17

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Technical Advisory Committees; Notice of Recruitment of Private- Sector Members SUMMARY: Seven Technical Advisory Committees (TACs) advise the Department of Commerce on the technical parameters for export controls applicable to dual-use commodities and...

78 FR 5774 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

Science.gov (United States)

2013-01-28

... DEPARTMENT OF COMMERCE Bureau of Industry and Security Technical Advisory Committees; Notice of Recruitment of Private- Sector Members SUMMARY: Seven Technical Advisory Committees (TACs) advise the Department of Commerce on the technical parameters for export controls applicable to dual-use commodities and...

Survey on workforce retention and attrition

Science.gov (United States)

Showstack, Randy

2013-03-01

The Society of Petroleum Engineers (SPE) is conducting a survey to gather information on why technical professionals change jobs or quit working. The survey, prompted by concern about the retention of skilled workers, aims to provide information to employers that can assist them in addressing practices that can lead to significant workforce attrition. To participate in the survey, which is open to everyone (including those who are not SPE members), go to http://research.spe.org/se.ashx?s=705E3F1335720258 through 15 May 2013. For more information, contact speresearch@spe.org.

Survey Response-Related Biases in Contingent Valuation: Concepts, Remedies, and Empirical Application to Valuing Aquatic Plant Management

Science.gov (United States)

Mark L. Messonnier; John C. Bergstrom; Chrisopher M. Cornwell; R. Jeff Teasley; H. Ken Cordell

2000-01-01

Simple nonresponse and selection biases that may occur in survey research such as contingent valuation applications are discussed and tested. Correction mechanisms for these types of biases are demonstrated. Results indicate the importance of testing and correcting for unit and item nonresponse bias in contingent valuation survey data. When sample nonresponse and...

A survey of ecological risk assessment at DOE facilities

International Nuclear Information System (INIS)

Barnthouse, L.W.; Bascietto, J.; Joseph, T.; Bilyard, G.

1992-01-01

The US Department of Energy (DOE) Risk-Based Standards Working Group is studying standard-setting and remedial action based on realistic estimates of human health and ecological risks. Federal and state regulations require DOE to assess ecological risks due to present and past operation of DOE facilities and ecological damage caused by remedial actions. Unfortunately, little technical guidance has been provided by regulatory agencies about how these assessments should be performed or what constitutes an adequate assessment. Active ecological research, environmental characterization, and ecological risk assessment programs are already underway at many locations. Some of these programs were established more than 30 years ago. Because of the strength of its existing programs and the depth of expertise available within the DOE complex, the agency is in a position to lead in developing ecological risk assessment procedures that are fully consistent with the general principles defined by EPA and that will ensure environmentally sound and cost-effective restoration of its sites. As a prelude to guidance development, the working group conducted a survey of ecological risk assessment activities at a subset of major DOE facilities. The survey was intended to (1) identify approaches now being used in ecological risk assessments performed by DOE staff and contractors at each site, (2) record successes and failures of these approaches, (3) identify new technical developments with potential for general application to many DOE facilities, and (4) identify major data needs, data resources, and methodological deficiencies

Comparison of methods applicable to evaluation of nuclear power plant technical specifications

International Nuclear Information System (INIS)

Cho, N.Z.; Bozoki, G.E.; Youngblood, R.W.

1986-01-01

This study compares three probabilistic methods based on the static fault tree analysis, time-dependent unavailability analysis, and Markov analysis, which can be used to evaluate technical specifications in nuclear power plants. They are tested on a sample problem which was devised to closely represent the important and essential characteristics that should be addressed in determination and evaluation of the technical specifications

FY 2000 report on the survey on the long-term energy technology strategy. Fundamental survey to work out industrial technology strategies (technology strategy by field - material technology field); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of constructing the material technology strategy, conducted were study of the trend of technical development, arrangement of material technology seeds, and survey of the R and D environment. Concretely, the paper carried out the grasp of the national projects related to materials in Europe and the U.S., patent registration (U.S.-Japan comparison)/application (Europe/Japan), transfer of technology trade, and survey of the trend of papers made public in scientific magazines. Further, in the survey of the R and D environment, conducted were how to treat researchers/engineers, how to handle intellectual ownership, system to promote the cooperation among industry/university/government, and comparison among countries in policies of technology such as patent strategy. The results of the survey were classified into the following 4 items: 1) trend of the technical development in the material technology field; 2) developmental environment in the material technology field; 3) competitive force in the material field and material user needs/seeds maps; 4) proposal for the material technology strategy. As to the competitive force of material technology in 3), the paper took up organic/polymer, iron/steel, aluminum, semiconductor, and ceramic materials. (NEDO)

Yucca Mountain Climate Technical Support Representative

International Nuclear Information System (INIS)

Sharpe, Saxon E

2007-01-01

The primary objective of Project Activity ORD-FY04-012, 'Yucca Mountain Climate Technical Support Representative', was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding

Technical compliance to standard guidelines for lumbar puncture and myelography: survey of academic neuroradiology attendings and fellows.

Science.gov (United States)

Zhang, Yi C; Chandler, Alexander J; Kagetsu, Nolan J

2014-05-01

To assess technical compliance among neuroradiology attendings and fellows to standard guidelines for lumbar puncture and myelography to minimize procedural complications such as iatrogenic meningitis and spinal headache. We surveyed academic neuroradiology attendings and fellows in the e-mail directory of the Association of Program Directors in Radiology. We queried use of face masks, use of noncutting needles, and dural puncture practices. All data were collected anonymously. A total of 110 survey responses were received: 75 from neuroradiology attendings and 34 from fellows, which represents a 14% response rate from a total of 239 fellows. Forty-seven out of 101 (47%) neuroradiologists do not always wear a face mask during myelograms, and 50 out of 105(48%) neuroradiologists do not always wear a face mask during lumbar punctures, placing patients at risk for iatrogenic meningitis. Ninety-six out of 106 neuroradiologists (91%) use the Quincke cutting needle by default, compared to only 17 out of 109 neuroradiologists (16%) who have ever used noncutting needles proven to reduce spinal headache. Duration of postprocedure bed rest does not influence incidence of spinal headache and may subject patients to unnecessary monitoring. Only 15 out of 109 (14%) neuroradiologists in our study do not prescribe bed rest. There was no statistically significant difference in practice between attendings and fellows. Iatrogenic meningitis and spinal headache are preventable complications of dural puncture that neuroradiologists can minimize by conforming to procedural guidelines. Wearing face masks and using noncutting spinal needles will reduce patient morbidity and lower hospitalization costs associated with procedural complications. Copyright © 2014 AUR. Published by Elsevier Inc. All rights reserved.

TALIS 2013 Technical Report: Teaching and Learning International Survey

Science.gov (United States)

OECD Publishing, 2013

2013-01-01

Effective teaching and teachers are key to producing high-performing students worldwide. So how can countries prepare teachers to face the diverse challenges in today's schools? The Teaching and Learning International Survey (TALIS) helps answer this question. TALIS asks teachers and schools about their working conditions and the learning…

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide Vitè

2002-01-01

Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide VITÈ

2002-01-01

Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

Power Electronics for Distributed Energy Systems and Transmission and Distribution Applications: Assessing the Technical Needs for Utility Applications

Energy Technology Data Exchange (ETDEWEB)

Tolbert, L.M.

2005-12-21

Power electronics can provide utilities the ability to more effectively deliver power to their customers while providing increased reliability to the bulk power system. In general, power electronics is the process of using semiconductor switching devices to control and convert electrical power flow from one form to another to meet a specific need. These conversion techniques have revolutionized modern life by streamlining manufacturing processes, increasing product efficiencies, and increasing the quality of life by enhancing many modern conveniences such as computers, and they can help to improve the delivery of reliable power from utilities. This report summarizes the technical challenges associated with utilizing power electronics devices across the entire spectrum from applications to manufacturing and materials development, and it provides recommendations for research and development (R&D) needs for power electronics systems in which the U.S. Department of Energy (DOE) could make a substantial impact toward improving the reliability of the bulk power system.

Public computing options for individuals with cognitive impairments: survey outcomes.

Science.gov (United States)

Fox, Lynn Elizabeth; Sohlberg, McKay Moore; Fickas, Stephen; Lemoncello, Rik; Prideaux, Jason

2009-09-01

To examine availability and accessibility of public computing for individuals with cognitive impairment (CI) who reside in the USA. A telephone survey was administered as a semi-structured interview to 145 informants representing seven types of public facilities across three geographically distinct regions using a snowball sampling technique. An Internet search of wireless (Wi-Fi) hotspots supplemented the survey. Survey results showed the availability of public computer terminals and Internet hotspots was greatest in the urban sample, followed by the mid-sized and rural cities. Across seven facility types surveyed, libraries had the highest percentage of access barriers, including complex queue procedures, login and password requirements, and limited technical support. University assistive technology centres and facilities with a restricted user policy, such as brain injury centres, had the lowest incidence of access barriers. Findings suggest optimal outcomes for people with CI will result from a careful match of technology and the user that takes into account potential barriers and opportunities to computing in an individual's preferred public environments. Trends in public computing, including the emergence of widespread Wi-Fi and limited access to terminals that permit auto-launch applications, should guide development of technology designed for use in public computing environments.

Branch technical position for performance assessment of low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

Campbell, A.C.; Abramson, L.; Byrne, R.M.

1994-01-01

The U.S. Nuclear Regulatory Commission has developed a Draft Branch Technical Position on Performance Assessment of Low-Level Radioactive Waste Disposal Facilities. The draft technical position addresses important issues in performance assessment modeling and provides a framework and technical basis for conducting and evaluating performance assessments in a disposal facility license application. The technical position also addresses specific technical policy issues and augments existing NRC guidance pertaining to LLW performance assessment

Photo-Modeling and Cloud Computing. Applications in the Survey of Late Gothic Architectural Elements

Science.gov (United States)

Casu, P.; Pisu, C.

2013-02-01

This work proposes the application of the latest methods of photo-modeling to the study of Gothic architecture in Sardinia. The aim is to consider the versatility and ease of use of such documentation tools in order to study architecture and its ornamental details. The paper illustrates a procedure of integrated survey and restitution, with the purpose to obtain an accurate 3D model of some gothic portals. We combined the contact survey and the photographic survey oriented to the photo-modelling. The software used is 123D Catch by Autodesk an Image Based Modelling (IBM) system available free. It is a web-based application that requires a few simple steps to produce a mesh from a set of not oriented photos. We tested the application on four portals, working at different scale of detail: at first the whole portal and then the different architectural elements that composed it. We were able to model all the elements and to quickly extrapolate simple sections, in order to make a comparison between the moldings, highlighting similarities and differences. Working in different sites at different scale of detail, have allowed us to test the procedure under different conditions of exposure, sunshine, accessibility, degradation of surface, type of material, and with different equipment and operators, showing if the final result could be affected by these factors. We tested a procedure, articulated in a few repeatable steps, that can be applied, with the right corrections and adaptations, to similar cases and/or larger or smaller elements.

Synthetic biology and the technicity of biofuels.

Science.gov (United States)

Mackenzie, Adrian

2013-06-01

The principal existing real-world application of synthetic biology is biofuels. Several 'next generation biofuel' companies-Synthetic Genomics, Amyris and Joule Unlimited Technologies-claim to be using synthetic biology to make biofuels. The irony of this is that highly advanced science and engineering serves the very mundane and familiar realm of transport. Despite their rather prosaic nature, biofuels could offer an interesting way to highlight the novelty of synthetic biology from several angles at once. Drawing on the French philosopher of technology and biology Gilbert Simondon, we can understand biofuels as technical objects whose genesis involves processes of concretisation that negotiate between heterogeneous geographical, biological, technical, scientific and commercial realities. Simondon's notion of technicity, the degree of concretisation of a technical object, usefully conceptualises this relationality. Viewed in terms of technicity, we might understand better how technical entities, elements, and ensembles are coming into being in the name of synthetic biology. The broader argument here is that when we seek to identify the newness of disciplines, their newness might be less epistemic and more logistic. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Technical Demand of Commercial Paddy Farmers in the Context of Labor Transfer

OpenAIRE

Feng, Liang-xuan; Qi, Zhen-hong; Tian, Yun; Zhou, Hui

2012-01-01

On the basis of document research, we summed up factors of technical demand of commercial paddy farmers to four aspects: individual characteristics of farmers, natural endowment of resources, factors related to risks, and information factor. Then, we put forward relevant hypotheses. From survey results of 241 farmer households in 4 southwestern provinces (regions), by the binary logistic regression analysis method, we empirically studied influences of the above four factors on technical deman...

Determination of aims military-technical policy of Ukraine

Directory of Open Access Journals (Sweden)

O. F. Salnikova

2014-06-01

Full Text Available In the article the aims of military-technical policy are considered. Determination of aims (tasks of military-technical policy, its maintenance, requirements to it and directions of its further development it must come true by the analysis of different factors of external and internal environment. Among such factors: geopolitical and military-political position of Ukraine and its military doctrine; realized and operating programs of development (reformation of the soldiery forming and them technical rigging; terms of future military operations and progress of their maintenance, forms, methods and characteristic signs of battle actions trend; substantive provisions of art of war; conceptions, theories and doctrines of battle application of the soldiery forming of the different states; resources dedicated by the state on development of military-technical sphere and others like that. The fundamental chart of sequence of forming of public military-technical policy is presented in the article.

Technical inefficiency and competitiveness in production: the case of ...

African Journals Online (AJOL)

The study examined technical inefficiency and competitiveness among rice farmers in Niger State, Nigeria. Data for the analysis came from a random sample survey of the area of study. A Single-stage (Cobb-Douglas based stochastic frontier production function was used in analyzing the data. Evidence from the analysis ...

Standardized Technical Data Survey (STDS) for Aerial Refueling

Science.gov (United States)

2016-09-06

enter text. c Distance (from nozzle tip) where measured (Inches) Click here to enter text. d Provide a fuel flow versus pressure curve for all pumping ...AUTHORIZED FUELS 9. MAXIMUM FUEL ONLOAD RATE (WHERE MEASURED) Ref. 2 (ARSAG Doc 03-00-03R) 10. MAXIMUM RATE OF FUEL DUMP (Optional) 11. FUEL VENT CAPABILITY...tank and all tanks filling. ☐Attached to Survey ☐ Not Available a Maximum rate of fuel dump (GPM) Click here to enter text. a Has the vent be certified

1979-80 Literature Electives Survey.

Science.gov (United States)

Young, Art

1980-01-01

A group of 66 college English departments was surveyed regarding their most popular literature courses. Most popular were courses in Shakespeare, science fiction, film, fiction, United States literature, and modern and contemporary literature. The most popular writing courses were creative, technical/business, and advanced composition. (DF)

United States: Ukraine Technical Exchange II trip report

International Nuclear Information System (INIS)

Moak, D.J.; Wendling, M.A.

1995-02-01

May 15--21, 1994, the first technical conference was held at Hanford between Ukraine-Chornobyl, Westinghouse Hanford, and SAIC, to exchange technical information and experience gained in cleanup and stabilization of radioactive contamination at Hanford and Chornobyl. Protocol was signed for a second exchange and technology demonstration program in Kiev and near Chornobyl power plants. Technical Exchange No. 2 was held from August 28--September 9, 1994, with 3 focus areas: field demonstration of DOE-Hanford technologies and application to cleanup of contaminated lands resulting from 1986 Chornobyl accident; application of other US DOE-technologies; and observation/evaluation of Ukraine-developed technologies for potential application in USA. Three radiological mapping systems were demonstrated near Chornobyl: man-carried Ultrasonic Ranging and Data System, a mobile radiological data system, and NOMAD field gamma spectroscopy system. The Ukraine-Chornobyl team hosted technical presentations, discussions and field trips for 4.5 days, providing insight on the Chornobyl problem and allowing the US team to present overviews on DOE technologies that may be applicable to the Chornobyl situation. It is concluded that Ukrainian scientists have tremendous talent and expended considerable energy in attempting to tackle such a problem, but economic and cultural conditions with Ukraine have prevented them from acquiring the resources to implement basic aspects of characterization and remediation activities. Most of their publications are in Russian only. Their translation, plus resources to carry out proposals for bench scale and field demonstration projects, could benefit the DOE complex and other nuclear programs. The considerable cultural and economic change occurring in Ukraine, is providing opportunities for private industries to assist in the changes and for DOE, others to apply cleanup technologies, and it is essential that close institutional relations be established

Endogenous induced technical change and the costs of Kyoto

International Nuclear Information System (INIS)

Buonanno, Paolo; Carraro, Carlo; Galeotti, Marzio

2003-01-01

We present a model for climate change policy analysis which accounts for the possibility that technology evolves endogenously and that technical change can be induced by environmental policy measures. Both the output production technology and the emission-output ratio depend upon a stock of knowledge, which accumulates through R and D activities. Two versions of this model are studied, one with endogenous technical change but exogenous environmental technical change and the other with both endogenous and induced technical change. A third version also captures technological spillover effects. As an application, the model is simulated allowing for trade of pollution permits as specified in the Kyoto Protocol and assessing the implications in terms of cost efficiency, economic growth and R and D efforts of the three different specifications of technical change

INTELLECTUAL AUTOMATION OF ENGINEERING SURVEY OF BUILDING OBJECTS

Directory of Open Access Journals (Sweden)

Galina G. Kashevarova

2017-09-01

Full Text Available The engineering survey of construction objects is characterized by nonclassical situations in setting tasks. The reasons for this are poor formalizability, complexity of the construction system, non-standard, contradictory description of the situation, the difficulty of accurately measuring controlled quantities, inaccurate performance, etc. Thus, the decision on the technical condition is associated with the solution of the problem with fuzzy initial data, approximate "linguistic" characteristics of the input parameters (for example, structural defects and with the vagueness of formulations of categories of technical condition. Due to the fact that a person is included in the process of preparing decisions, he can not help but dilute this process with a noticeable share of subjectivity. The introduction of intelligent automation in the form of expert systems in assessing the technical condition of the structures of operated buildings and structures built on the basis of knowledge as a result of summarizing expert assessments represents a transition to a new, higher-quality and cost-effective technological level for survey of construction sites. Perhaps already in the near future, the products of intellectualization of the stages of engineering survey and monitoring of construction sites will be mandatory tools of this field of activity, as an integral part of guaranteeing the reliability of the issued results.

The Profitability of the Strategy Linking Fundamental, Portfolio and Technical Analysis on the Polish Capital Market

Directory of Open Access Journals (Sweden)

Flotyński Marcin

2016-12-01

Full Text Available In the article, several methods of taking investment decisions are described: a fundamental, portfolio, and technical analysis. They constitute different approaches which are convenient for different types of investors with various expectations and time horizons of their investments. The simultaneous combination of these three analyses is not popular. The aim of this study is to test the effectiveness of simultaneous use of a fundamental analysis, portfolio analysis, and technical analysis for shares quoted on the Warsaw Stock Exchange (WSE in 2000–2007. The research hypothesis is advanced that the concurrent-linked application of a fundamental, portfolio, and technical analysis brings better results than the separate use of these analyses. Models of capital market, such as CAPM and APT, have been used, as well as P/E ratio, Return on Equity (RoE, Relative Strength Index (RSI, and Exponential Moving Average (EMA. The combination of a financial analysis, technical indicators, and models of the capital market in order to invest on the stock exchange is author’s own method. In general, the survey has been carried out on the grounds of quantitative methods (financial analysis, regression model, and multi regression model and a comparative analysis. The results of the research have been used to create diversified portfolios on the WSE. It occurs that the concurrent use of the three analyses brings the highest rate of return of a portfolio.

Intelligent systems in technical and medical diagnostics

CERN Document Server

Korbicz, Jozef

2013-01-01

For many years technical and medical diagnostics has been the area of intensive scientific research. It covers well-established topics as well as emerging developments in control engineering, artificial intelligence, applied mathematics, pattern recognition and statistics. At the same time, a growing number of applications of different fault diagnosis methods, especially in electrical, mechanical, chemical and medical engineering, is being observed. This monograph contains a collection of 44 carefully selected papers contributed by experts in technical and medical diagnostics, and constitutes

2012 Mask Industry Survey

Science.gov (United States)

Malloy, Matt; Litt, Lloyd C.

2012-11-01

A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

Science.gov (United States)

2012-04-04

... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

Degradable Systems: A Survey of Multistate System Theory.

Science.gov (United States)

1982-08-01

and Subtitle) S. TYPE OF REPORT & PERIOD COVERED C. O DEGRADABLE SYSTEMS: A SURVEY OF MULTISTATE TECHNICAL SYSTEM THEORY 6. PERFORMING ORG. REPORT...THIS PAGE(R7,en Date £nt.,.d) AEoS-T- 8- 9 2 0 Degradable Systems: A Survey of Multistate System Theory by 1 2Emad El-Neweihi and Frank Proschan

Technical FAQ – Trees and People: Resilience in a changing ...

International Development Research Centre (IDRC) Digital Library (Canada)

Where do I find the online application form? 2. When preparing my Bene fellowship application, do I have to complete the entire application at once or can I complete some sections, upload some documents, save them, and continue later? 3. I have a technical problem with my online application, whom should I contact?

Bots mind the social-technical gap

NARCIS (Netherlands)

Lee, M.; Frank, L.E.; Beute, F.; de Kort, Y.A.W.; IJsselsteijn, W.A.

2017-01-01

Mobile workers experience the social-technical gap when moral dilemmas occur on communication platforms, and technology cannot adapt to social contexts on ethical matters. On messaging applications, bots are non-human team members and/or assistants that can aid mobile workers manage ethical

Worldwide trends of the mine surveying services

Energy Technology Data Exchange (ETDEWEB)

Sun, Z. (Coal Science Research Institute, Tangshan (China))

1991-08-01

This author discusses the role of mine surveying in the present and future mining industry, and summarizes the main trends of development as follows: active training of specialists and technical experts; employment of advance surveying technology and data and image processing technology; research and development of measuring method and equipment for accurate measurement of strata movement and deformation; accurate forecasts of ground motion or earthquakes.

Synthesis, Characterization, and Application of 1-D Cerium Oxide Nanomaterials: A Review

Directory of Open Access Journals (Sweden)

Kuen-Song Lin

2010-09-01

Full Text Available The present work provides a comprehensive overview of the recent progress of research work toward developing new one dimensional (1-D ceria (CeO2 nanomaterials. The review has been classified into three parts: the preparation procedures with identification of the existing different dimensional ceria nanomaterials, the formation mechanisms, and an analysis of their applications. From literature survey, it is inaugurated that the fundamental structures of the ceria nanomaterials constructively dominate their properties and applications. In addition, this work will also provide a perspective on the future technical trends for the development of different dimensional CeO2 nanomaterials.

Technical Assessment of Cryo-Compressed Hydrogen Storage Tank Systems for Automotive Applications

Energy Technology Data Exchange (ETDEWEB)

Ahluwalia, Rajesh [Argonne National Lab. (ANL), Argonne, IL (United States); Hua, T. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Peng, J. -K. [Argonne National Lab. (ANL), Argonne, IL (United States); Lasher, S. [TIAX LLC, Lexington, MA (United States); McKenney, Kurtis [TIAX LLC, Lexington, MA (United States); Sinha, J. [TIAX LLC, Lexington, MA (United States)

2009-12-01

Technical report describing DOE's second assessment report on a third generation (Gen3) system capable of storing hydrogen at cryogenic temperatures within a pressure vessel on-board a vehicle. The report includes an overview of technical progress to date, including the potential to meet DOE onboard storage targets, as well as independent reviews of system cost and energy analyses of the technology paired with delivery costs.

U.S. Geological Survey Emerging Applications of Unmanned Aircraft Systems

Science.gov (United States)

Hutt, M. E.

2012-12-01

In anticipation of transforming the research methods and resource management techniques employed across the Department of the Interior, the U.S. Geological Survey (USGS) Unmanned Aircraft Systems (UAS) Project Office is conducting missions using small UAS- sUAS platforms (technology in support of scientific, resource and land management missions. UAS technology is currently being used by USGS and our partners to monitor environmental conditions, analyze the impacts of climate change, respond to natural hazards, understand landscape change rates and consequences, conduct wildlife inventories and support related land management and law enforcement missions. Our ultimate goal is to support informed decision making by creating the opportunity, via UAS technology, to gain access to an increased level of persistent monitoring of earth surface processes (forest health conditions, wildfires, earthquake zones, invasive species, etc.) in areas that have been logistically difficult, cost prohibitive or technically impossible to obtain consistent, reliable, timely information. USGS is teaming with the Department of the Interior Aviation Management Directorate to ensure the safe and cost effective adoption of UAS technology. While the USGS is concentrating on operating sUAS, the immense value of increased flight time and more robust sensor capabilities available on larger platforms cannot be ignored. We are partnering with several groups including the Department of Homeland Security, National Aeronautics and Space Administration, Department of Defense, and National Oceanic and Atmospheric Administration for access to data collected from their fleet of high altitude, long endurance (HALE) UAS. The HALE systems include state of the art sensors including Electro-Optical, Thermal Infrared and Synthetic Aperture Radar (SAR). The data being collected by High Altitude, Long Endurance (HALE) systems is can be routinely shared in near real time at several DOI- USGS locations. Analysis

76 FR 41293 - Solicitation of Proposals for Technical Assistance Funding From the Native American Business...

Science.gov (United States)

2011-07-13

... for NABDI Technical Assistance Funding D. Submission of Application in Digital Format E. Application.... The IEED has spent considerable time and expense in collecting digital land grids, geographic...: Marketing studies. 9. What the NABDI Technical Assistance Funding Cannot Fund As stated above, these funds...

Manhattan Project Technical Series: The Chemistry of Uranium (I)

International Nuclear Information System (INIS)

Rabinowitch, E. I.; Katz, J. J.

1947-01-01

This constitutes Chapters 11 through 16, inclusive, of the Survey Volume on Uranium Chemistry prepared for the Manhattan Project Technical Series. Chapters are titled: Uranium Oxides, Sulfides, Selenides, and Tellurides; The Non-Volatile Fluorides of Uranium; Uranium Hexafluoride; Uranium-Chlorine Compounds; Bromides, Iodides, and Pseudo-Halides of Uranium; and Oxyhalides of Uranium.

Manhattan Project Technical Series: The Chemistry of Uranium (I)

Energy Technology Data Exchange (ETDEWEB)

Rabinowitch, E. I. [Argonne National Lab. (ANL), Argonne, IL (United States); Katz, J. J. [Argonne National Lab. (ANL), Argonne, IL (United States)

1947-03-10

This constitutes Chapters 11 through 16, inclusive, of the Survey Volume on Uranium Chemistry prepared for the Manhattan Project Technical Series. Chapters are titled: Uranium Oxides, Sulfides, Selenides, and Tellurides; The Non-Volatile Fluorides of Uranium; Uranium Hexafluoride; Uranium-Chlorine Compounds; Bromides, Iodides, and Pseudo-Halides of Uranium; and Oxyhalides of Uranium.

Satellite Navigation Systems: Policy, Commercial and Technical Interaction.

Science.gov (United States)

Rycroft, M.

2003-12-01

This book adopts a broad perspective on positioning and navigation systems which rely on Earth orbiting satellites for their successful operation. The first of such global systems was the US Global Positioning System (GPS), and the next the Russian GLONASS system. Now studies relating to Europe's future Galileo system are gaining momentum and other nations are planning regional augmentation systems. All such systems are discussed here, particularly relating to political, commercial, legal and technical issues. The opportunities - and also the problems - of having three similar systems in operation simultaneously are examined, and several novel applications are proposed. These range from improved vehicular transport by land, sea and air, to more accurate surveying, more efficient agricultural practices and safer operations in mountainous regions. Everyone who is challenged by these topics will find this volume invaluable. ISU WWW Server; http://www.isunet.edu. Further information on ISU Symposia may also be obtained by e-mail from symposium@isu.isunet.edu Link: http://www.wkap.nl/prod/b/1-4020-1678-6

US Geological Survey National Computer Technology Meeting; Proceedings, Phoenix, Arizona, November 14-18, 1988

Science.gov (United States)

Balthrop, Barbara H.; Terry, J.E.

1991-01-01

The U.S. Geological Survey National Computer Technology Meetings (NCTM) are sponsored by the Water Resources Division and provide a forum for the presentation of technical papers and the sharing of ideas or experiences related to computer technology. This report serves as a proceedings of the meeting held in November, 1988 at the Crescent Hotel in Phoenix, Arizona. The meeting was attended by more than 200 technical and managerial people representing all Divisions of the U.S. Geological Survey.Scientists in every Division of the U.S. Geological Survey rely heavily upon state-of-the-art computer technology (both hardware and sofnuare). Today the goals of each Division are pursued in an environment where high speed computers, distributed communications, distributed data bases, high technology input/output devices, and very sophisticated simulation tools are used regularly. Therefore, information transfer and the sharing of advances in technology are very important issues that must be addressed regularly.This report contains complete papers and abstracts of papers that were presented at the 1988 NCTM. The report is divided into topical sections that reflect common areas of interest and application. In each section, papers are presented first followed by abstracts. For these proceedings, the publication of a complete paper or only an abstract was at the discretion of the author, although complete papers were encouraged.Some papers presented at the 1988 NCTM are not published in these proceedings.

Report of the Office of Nuclear Reactor Regulation technical assistance task force

International Nuclear Information System (INIS)

1981-11-01

In 1981, the Director of the Office of Nuclear Reactor Regulation (NRR) of the Nuclear Regulatory Commission (NRC) chartered a task force to assess the office program of technical assistance and to recommend improvements. The task force divided the technical assistance program into four areas, and the practices in each area were assessed through a series of surveys of staff, management, and contractor personnel. The task force placed emphasis in its interview and assessment process on the problem areas that exist in the technical assistance program. The report thus reflects a weight on the faults found as a result of the inquiries made. The four major areas of technical assistance contracting studied were program planning, program management and execution, program control and management information systems, and program administration and coordination

Technical and economical aspects of wind energy applications in Germany

Energy Technology Data Exchange (ETDEWEB)

Durstewitz, M; Hoppe-Kilpper, M; Kleinkauf, W [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

1996-12-31

The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

Technical and economical aspects of wind energy applications in Germany

Energy Technology Data Exchange (ETDEWEB)

Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W. [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

1995-12-31

The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

Technical and economical aspects of wind energy applications in Germany

International Nuclear Information System (INIS)

Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W.

1995-01-01

The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO 2 , SO 2 , NO x etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme '250 MW Wind'. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

Risk based optimization of technical specifications for operation of nuclear power plants

International Nuclear Information System (INIS)

1993-12-01

The objective of the report is to present an overview of the risk and reliability based approaches (using a probabilistic safety assessment (PSA)) for improving nuclear power plant technical specifications (TS). In that case, it will provide an information base to the Member States in seeking PSA based applications to enhance the effectiveness of their technical specifications. To achieve this objective, the report discusses the basic objectives and reasons for seeking TS changes, the methods, data requirements and uses of different types of applications, and an overview of different applications that have been completed, including detailed descriptions of selected applications. Refs, figs and tabs

A Comprehensive Approach to WSN-Based ITS Applications: A Survey

Directory of Open Access Journals (Sweden)

Joan Garcia-Haro

2011-10-01

Full Text Available In order to perform sensing tasks, most current Intelligent Transportation Systems (ITS rely on expensive sensors, which offer only limited functionality. A more recent trend consists of using Wireless Sensor Networks (WSN for such purpose, which reduces the required investment and enables the development of new collaborative and intelligent applications that further contribute to improve both driving safety and traffic efficiency. This paper surveys the application of WSNs to such ITS scenarios, tackling the main issues that may arise when developing these systems. The paper is divided into sections which address different matters including vehicle detection and classification as well as the selection of appropriate communication protocols, network architecture, topology and some important design parameters. In addition, in line with the multiplicity of different technologies that take part in ITS, it does not consider WSNs just as stand-alone systems, but also as key components of heterogeneous systems cooperating along with other technologies employed in vehicular scenarios.

Complex investigation of thermo-technical parameters of Ruskov andesite

Directory of Open Access Journals (Sweden)

František Krepelka

2006-12-01

Full Text Available The research of thermo-technical parameters of Ruskov andesite was made as a part of the complex research of its properties as well as of rock disintegration by the action of chemical flame on the rock surface, i.e. thermal spalling in particular. Thermal spalling is a process in which thermal stresses are induced in the surface layer of rock whose surface is thereby disintegrated into small parts, the so called spalls, by the brittle manner. The evaluation of thermo-technical properties of the studied rocks is necessary for the qualification and quantification of the thermal spalling process. The measured and evaluated parameters were the coefficient of linear thermal expansion, the coefficient of thermal conductivity, the specific heat capacity and the coefficient of thermal diffusivity. Andesite from the Ruskov locality was chosen as a basic experimental material for the investigation of thermal spalling upon preliminary experiments. The estimated thermo-technical parameters were analyzed regarding the application of thermal spalling for the disintegration of the Ruskov andesite. The outcome as that the values of determine thermo-technical parameters established an expectation for its successful application.

Technical procedures for ecology: Environmental field program, Deaf Smith County Site, Texas: Final draft

International Nuclear Information System (INIS)

1987-08-01

This volume contains Technical Procedures pursuant to the Land Use Site Study Plan including walkover surveys for threatened, endangered, or candidate species; vegetation classification and mapping; reclamation planning; wetland and floodplain determination and characterization of playas; wildlife habitat mapping methods; mammal sampling; bird survey methods; reptile and amphibian survey methods; preexisting environmental; stress and disturbance studies methods; voucher specimens for plants; and voucher specimens to wildlife. 9 refs., 5 figs., 1 tab

Risk-based analysis methods applied to nuclear power plant technical specifications

International Nuclear Information System (INIS)

Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

1989-01-01

A computer-aided methodology and practical applications of risk-based evaluation of technical specifications are described. The methodology, developed for use by the utility industry, is a part of the overall process of improving nuclear power plant technical specifications. The SOCRATES computer program uses the results of a probabilistic risk assessment or a system-level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at the plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns and decreasing labor requirements for test and maintenance activities, with no adverse impacts on risk. The methodology and the SOCRATES computer program have been used extensively toe valuate several actual technical specifications in case studies demonstrating the methods. Summaries of these applications demonstrate the types of results achieved and the usefulness of the risk-based evaluation in improving the technical specifications

Design of Technical Support System for Retail Company Based on Cloud

Directory of Open Access Journals (Sweden)

Shao Ping

2017-01-01

Full Text Available With the retail side of the market in China, the sale of electricity companies as a new source of power retail, they participate in the electricity market business. National and local governments subsequently introduced the corresponding policies and rules, the technical support system becomes one of the necessary conditions for the access of the retail company. Retail electricity companies have started the system construction, but has not yet formed a standardized, complete architecture. This paper analyzes the business and data interaction requirements of retail electricity companies, and then designs the functional architecture based on basic application, advanced application and value-added application, and the technical architecture based on “cloud”. On this basis, the paper discusses the selection of private cloud, public cloud and mixed cloud model, and the rationalization suggestion of system construction. Which can provide reference for the construction of the technical support system of the domestic retail enterprises.

The application of land-based computerized spectrometers for effluent monitoring aboard nuclear powered ships. Final technical report

International Nuclear Information System (INIS)

Kamykowski, E.A.

1975-12-01