UT simulation using a fully automated 3D hybrid model: Application to planar backwall breaking defects inspection

Science.gov (United States)

Imperiale, Alexandre; Chatillon, Sylvain; Darmon, Michel; Leymarie, Nicolas; Demaldent, Edouard

2018-04-01

The high frequency models gathered in the CIVA software allow fast computations and provide satisfactory quantitative predictions in a wide range of situations. However, the domain of validity of these models is limited since they do not accurately predict the ultrasound response in configurations involving subwavelength complex phenomena. In addition, when modelling backwall breaking defects inspection, an important challenge remains to capture the propagation of the creeping waves that are generated at the critical angle. Hybrid models combining numerical and asymptotic methods have already been shown to be an effective strategy to overcome these limitations in 2D [1]. However, 3D simulations remain a crucial issue for industrial applications because of the computational cost of the numerical solver. A dedicated three dimensional high order finite element model combined with a domain decomposition method has been recently proposed to tackle 3D limitations [2]. In this communication, we will focus on the specific case of planar backwall breaking defects, with an adapted coupling strategy in order to efficiently model the propagation of creeping waves. Numerical and experimental validations will be proposed on various configurations.

Ultra-fast repair of single-strand breaks in DNA of. gamma. -irradiated Chinese hamster cells

Energy Technology Data Exchange (ETDEWEB)

Leontjeva, G A; Mantzighin, Yu A; Gaziev, A I [AN SSSR, Pushchino-na-Oke. Inst. Biologicheskoj Fiziki

1976-12-01

Studies of the effect of thermal treatment of Chinese hamster cells on sedimentation of DNA in the alkaline sucrose gradient showed that heating the cells to 68/sup 0/C for 15 min caused the same degradation as ..gamma..-irradiation with 5 to 7 krad at 37/sup 0/C. The inhibition of cellular repair enzymes by heating was therefore unacceptable. The process of ultra-fast repair is essentially determined by the DNA-ligase reaction, which is activated in the presence of Mg ions, and inhibited in mammalian cells in the presence of EDTA and pyrophosphate. Sedimentation profiles were therefore measured for the DNA of Chinese hamster cells ..gamma..-irradiated (5 krad) at 0/sup 0/C or 22/sup 0/C in the presence of Mg/sup + +/, or EDTA and pyrophosphate, and the results demonstrated ultra-fast repair only at 20 to 37/sup 0/C, in contrast to bacteria. A study was made of the temperature dependence of the activity of the DNA ligases isolated from E.coli and rabbit bone marrow. The NAD-dependent bacterial DNA ligase was active at temperatures from 0 to 40/sup 0/C, whereas ATP-dependent DNA ligase of mammals only showed activity in the range 15 to 40/sup 0/C. The differing temperature dependences of ultra-fast repair in bacterial and mammalian cells are in agreement with the temperature dependences of the activities of isolated enzymes, and the results suggest that the process of ultra-fast repair of single-strand breaks of DNA takes place in both bacterial and mammalian cells.

Break-in and Performance Issues on a single cell PBI-based PEM Fuel Cell

DEFF Research Database (Denmark)

Kær, Søren Knudsen; Jespersen, Jesper Lebæk

of the fuel cell, even though break-in of a fuel cell implemented in a commercial application would most likely not be feasible. In the present work a commercially available PBI-based high temperature MEA is subject to a break-in procedure, as specified by the manufacturer. The cell was operated at 160 °C...... during the break-in procedure at a current density of 0.2 A/cm2. The performance of the cell was measured over the 100 hour break-in period and a polarization curve was recorded after completion of break-in. The performance change was minimal during the break-in cycle. However, in the first hour of op......-eration a significant performance decrease of 30 mV was observed. Hereafter a performance in-crease started and the overall performance change during the break-in procedure was a voltage in-crease of 35 mV corresponding to a rate of 240 μV/hr. The performance increase was however fast-est in the first 50 hours...

Skills Associated with Line Breaks in Elite Rugby Union

Directory of Open Access Journals (Sweden)

Steve den Hollander, James Brown, Michael Lambert, Paul Treu, Sharief Hendricks

2016-09-01

Full Text Available The ability of the attacking team to break through the defensive line is a key indicator of success as it creates opportunities to score tries. The aim of this study was to analyse line breaks and identify the associated skills and playing characteristics. The 2013 Super Rugby season (125 games was analysed, in which 362 line breaks were identified and coded using variables that assessed team patterns and non-contact attacking skills in the phases preceding the line break. There was an average of 3 line breaks per game, with 39% of line breaks resulting in a try. Line breaks occurred when the ball-carrier was running fast [61%, x2(4 = 25.784, p = 0.000, Cramer’s v = 0.1922, weak]. At a moderate distance, short lateral passes (19% and skip passes (15% attributed to the highest percentage of line breaks [x2(26 = 50.899, p = 0.036, Cramer’s v = 0.2484, moderate]. Faster defensive line speeds resulted in more line breaks [x2(12 = 61.703, p < 0.001, Cramer’s v = 0.3026, moderate]. Line breaks are associated with overall team success and try scoring opportunities. Awareness of the defenders line speed and depth, fast running speed when receiving the ball and quick passing between attackers to the outside backs creates line break opportunities. During training, coaches should emphasise the movement speed of the ball between attackers and manipulate the speed and distance of the defenders.

Special small-break applications with TRAC

International Nuclear Information System (INIS)

Dobranich, D.; DeMuth, N.S.; Henninger, R.J.; Burns, R.D. III.

1981-01-01

Input models for the Transient Reactor Analysis Code (TRAC) are described and applications of these models to reactor transients involving small breaks in the primary coolant pressure boundary are demonstrated. The operation of the primary overpressure protection system (relief and safety valves) and the thermal-hydraulic response of the reactor to these transients are obtained from numerical simulations. Also, the effects of steam generator recirculation, steam generator tube rupture, Emergency Core Cooling (ECC) injection and reactivity feedback on the course and consequences of these transients are investigated. These models allow reliable predictions of accident signatures that can help determine the adequacy of equipment and procedures at nuclear power plants to prevent and to control severe accidents

Fast on-line analysis of process alkane gas mixtures by NIR spectroscopy

NARCIS (Netherlands)

Boelens, H. F. M.; Kok, W. T.; de Noord, O. E.; Smilde, A. K.

2000-01-01

Proper operation of a molecular sieve process for the separation of iso- and cyclo-alkanes front normal alkanes requires the fast online detection of normal alkanes breaking through the column. The feasibility of using near-infrared (NIR) spectroscopy for this application was investigated. Alkane

Simple mathematical models of symmetry breaking. Application to particle physics

International Nuclear Information System (INIS)

Michel, L.

1976-01-01

Some mathematical facts relevant to symmetry breaking are presented. A first mathematical model deals with the smooth action of compact Lie groups on real manifolds, a second model considers linear action of any group on real or complex finite dimensional vector spaces. Application of the mathematical models to particle physics is considered. (B.R.H.)

Repair of double-strand breaks in Micrococcus radiodurans

International Nuclear Information System (INIS)

Burrell, A.D.; Dean, C.J.

1975-01-01

Micrococcus radiodurans has been shown to sustain double-strand breaks in its DNA after exposure to x-radiation. Following sublethal doses of x-rays (200 krad in oxygen or less), the cells were able to repair these breaks, and an intermediate fast-sedimenting DNA component seemed to be involved in the repair process

Improved break-in-slope analysis of the plasma energy response in tokamaks

International Nuclear Information System (INIS)

Lerche, E A; Eester, D van

2008-01-01

The break-in-slope method is a simple-although powerful-data analysis technique that is commonly used to determine the power absorption profiles of the plasma species during auxiliary heating experiments in tokamaks. It is based on the study of the energy response of the particles to sudden changes in the external power applied to the plasma. Even though some experimental conditions are favorable for the straightforward application of the break-in-slope analysis in its most simple form (linear fit of the experimental temperature signals), most situations require the retention of additional terms in the linearized energy conservation equation for a successful use of this technique. In this paper, important corrections necessary to extend the applicability of the traditional break-in-slope technique will be presented: (i) the numerical determination of the break-in-slope instants in the plasma energy response allowing the study of indirect (collisional) heating scenarios; (ii) the inclusion of the density variations due to the external power step based on fast density measurements; (iii) the exponential representation of the plasma energy evolution after the power break, describing the saturation of the experimental signals in slow modulation or single power step experiments; (iv) a first assessment of the influence of the change in the radiated power on the break-in-slope results. As will be shown, these corrections are particularly important in low absorption scenarios and in single power step studies, where the change in the external power cannot be considered 'non-perturbative' and the standard break-in-slope analysis usually leads to integrated power levels well below the actual power injected into the plasma

Dynamical supersymmetry breaking

International Nuclear Information System (INIS)

Affleck, I.

1985-03-01

Supersymmetry, and in particular, dynamical supersymmetry breaking, offers the hope of a natural solution of the gauge hierarchy problem in grand unification. I briefly review recent work on dynamical supersymmetry breaking in four-dimensional Higgs theories and its application to grand unified model building

Fast protocol for radiochromic film dosimetry using a cloud computing web application.

Science.gov (United States)

Calvo-Ortega, Juan-Francisco; Pozo, Miquel; Moragues, Sandra; Casals, Joan

2017-07-01

To investigate the feasibility of a fast protocol for radiochromic film dosimetry to verify intensity-modulated radiotherapy (IMRT) plans. EBT3 film dosimetry was conducted in this study using the triple-channel method implemented in the cloud computing application (Radiochromic.com). We described a fast protocol for radiochromic film dosimetry to obtain measurement results within 1h. Ten IMRT plans were delivered to evaluate the feasibility of the fast protocol. The dose distribution of the verification film was derived at 15, 30, 45min using the fast protocol and also at 24h after completing the irradiation. The four dose maps obtained per plan were compared using global and local gamma index (5%/3mm) with the calculated one by the treatment planning system. Gamma passing rates obtained for 15, 30 and 45min post-exposure were compared with those obtained after 24h. Small differences respect to the 24h protocol were found in the gamma passing rates obtained for films digitized at 15min (global: 99.6%±0.9% vs. 99.7%±0.5%; local: 96.3%±3.4% vs. 96.3%±3.8%), at 30min (global: 99.5%±0.9% vs. 99.7%±0.5%; local: 96.5%±3.2% vs. 96.3±3.8%) and at 45min (global: 99.2%±1.5% vs. 99.7%±0.5%; local: 96.1%±3.8% vs. 96.3±3.8%). The fast protocol permits dosimetric results within 1h when IMRT plans are verified, with similar results as those reported by the standard 24h protocol. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Symmetry breaking in superstring theories: applications in cosmology and particle physics

International Nuclear Information System (INIS)

Catelin-Julien, T.

2008-10-01

This thesis is devoted to the study of some applications of superstring theory in cosmology and in particle physics. The unifying principle of our work is the stringy spontaneous (super)symmetry breaking mechanism. Our manuscript starts with a general overview of string theory, where the emphasis is put on the aspects that will be important throughout our work. We introduce then our first work, in which we exhibit a new symmetry of the vacua of N = 1 heterotic string theory, exchanging the vectorial and spinorial representations of the grand unified gauge group. In a second part, we consider stringy cosmological evolutions, at non-zero temperature and in the presence of a supersymmetry breaking scale. We also give arguments for a stabilization of the compactification moduli. (author)

Frequency Activated Fast Power Reserve for Wind Power Plant Delivered from Stored Kinetic Energy in the Wind Turbine Inertia

DEFF Research Database (Denmark)

Knüppel, Thyge; Thuring, P.; Kumar, S

2011-01-01

is proposed that delivers a short-term power reserve from the kinetic energy in the wind turbine (WT) inertia, while considering the inherent characteristics of a wind power plant. The aim is to contribute with a fast power reserve to stabilize the frequency drop during large and sudden production deficits......With increased penetration of converter interfaced generation, synchronous generators may start to be displaced to keep the overall power balance. As a consequence the resulting inertia in the system may decrease and make the power system more exposed to frequency excursions. Here, a control...

A break-even analysis of delivering a memory clinic by videoconferencing.

Science.gov (United States)

Comans, Tracy A; Martin-Khan, Melinda; Gray, Leonard C; Scuffham, Paul A

2013-10-01

We analysed the costs of two kinds of dementia clinic. In the conventional clinic, held in a rural area, the specialist travels to the clinic from the city. In the videoconferencing clinic, patients are also seen in a rural area, but the specialist conducts the assessment by video from the city. The fixed costs common to both modalities, such as clinic infrastructure, were ignored. The total fixed cost of a monthly conventional clinic was $522 and the total fixed cost of a monthly videoconferencing clinic was $881. The additional variable cost of the specialist travelling to the conventional clinic was $2.62 per minute of the specialist's travelling time. The break-even point at which the cost of the two modalities is the same was just over two hours (138 min round trip). A sensitivity analysis showed that the break-even point was not particularly sensitive to changes in staff wages, but slightly more sensitive to the non labour costs of videoconferencing. Air travel is not an efficient alternative to travel by car. Reducing the number of clinics to six per year results in a much higher cost of running the videoconferencing service compared to the conventional service. Videoconferencing for the purpose of diagnosing dementia is both a reliable and cost effective method of health service provision when a specialist is required to drive for more than about two hours (round trip) to provide a memory disorder clinic service.

SU-E-J-21: Advantages of Ultra Fast Radiation Dose Delivering

International Nuclear Information System (INIS)

Feng, Y

2014-01-01

Purpose: For delivering conformed dose to a moving tumor and sparing normal tissue, we presented an innovation that was combined a linear accelerator and a storage ring to generate ultra high dose rate. This innovation allows delivering prescribed dose to a moving target in such a short time period, for an example 0.1 second, during which the displacement of the target could be ignored. Methods: The advantages of this approach were evaluated based on normal tissue sparing, feasibility, accuracy, and time saving in clinical treatment. The target volume reduction with this innovation approach was demonstrated by analyzing the values of GTVs, ITVs, and PTVs obtained from 15 patients who had been diagnosed with malignant neoplasm of lung and treated with SBRT. The processes of SBRT treatment were investigated and advantages of this innovation in improving SBRT lung treatment were evaluated. Results: With the ultra-high dose rate, the target volumes could be reduced by ∼30% to 50%. The innovation combining with IGRT technique could deliver prescribed dose to moving target accurately with simpler procedures than that of adaptive approach. This new approach could reduce the time of guiding treatment by many times. The new technique make a new strategy became feasible that was to deliver the dose to a target when it moved to a desirable location, such as away from critical organs. Conclusion: Combining with IGRT technique, this innovation could significantly improve the accuracy to deliver dose to moving targets with a shorter time than conventional techniques. The innovation opens a door for new strategies to deliver dose to moving targets

Non-electric Applications of Fast Reactors

International Nuclear Information System (INIS)

Safa, Henri; Borgard, Jean-Marc

2013-01-01

Conclusions: → Most of industrial applications (80%) require low temperature heat below 540°C; → Fast Reactors are technically suitable to provide industrial steam at temperatures not accessible by standard LWRs; → As an illustrative example, the application at an oil refinery site has been studied showing the economic benefits; → Nuclear Cogeneration enhances the overall energy efficiency of the power plant; • Nuclear Cogeneration allows massive cut in CO 2 emissions

Technology update on fast plastic scintillators for medical applications

International Nuclear Information System (INIS)

Lyons, P.B.

1977-01-01

Plastic scintillators appear to have potential utility in three research areas related to nuclear medicine: (1) high count rate applications in general, (2) positron camera applications, and (3) positron source localization through measurement of relative arrival times of annihilation quanta at two co-linear detectors. These three areas of applicability depend on improvement in three specific areas of plastic scintillator technology: (a) development of plastics with very fast decay times, (b) development of plastics with greatly improved high energy photon detection efficiencies (high-Z loaded plastics), and (c) improvement of fast timing system capabilities. The three preceding areas of improvement are discussed

Break the fast? Update on patient preparation for cholesterol testing.

Science.gov (United States)

Naugler, Christopher; Sidhu, Davinder

2014-10-01

To provide an update on the clinical usefulness of nonfasting versus fasting lipid testing to improve patient compliance, patient safety, and clinical assessment in cholesterol testing. Recommendations are identified as supported by good, fair, and poor (conflicting or insufficient) evidence, according to the classifications adopted by the Canadian Task Force on Preventive Health Care. Screening for dyslipidemia as a risk factor for coronary artery disease and management of lipid-lowering medications are key parts of primary care. Recent evidence has questioned the fasting requirement for lipid testing. In population-based studies, total cholesterol, high-density lipoprotein cholesterol, and non-low-density lipoprotein cholesterol all varied by an average of 2% with fasting status. For routine screening, nonfasting cholesterol measurement is now a reasonable alternative to a fasting cholesterol measurement. For patients with diabetes, the fasting requirement might be an important safety issue because of problems with hypoglycemia. For the monitoring of triglyceride and low-density lipoprotein cholesterol levels in patients taking lipid-lowering medications, fasting becomes more important. Fasting for routine lipid level determinations is largely unnecessary and unlikely to affect patient clinical risk stratification, while nonfasting measurement might improve patient compliance and safety. Copyright© the College of Family Physicians of Canada.

Application of fast fourier transform method to evaluate the accuracy of sbloca data base

International Nuclear Information System (INIS)

D'Auria, F.; Galassi, G.M.; Leonardi, M.; Galetti, M.R.

1997-01-01

The purpose of this paper is to perform the quantitative accuracy evaluation of a small break LOCA data base and then evaluate the accuracy of RELAP5/MOD2 code i.e. of the ensemble constituted by the code itself, the user, the nodalization and the selected code options, in predicting this kind of transient. In order to achieve this objective, qualitative accuracy evaluation results from several tests performed in 4 facilities (LOBI, SPES, BETHSY and LSTF) are used. The quantitative evaluation is achieved adopting a method developed at University of Pisa, which has capabilities in quantifying the errors in code predictions with respect to the measured experimental signal, using the Fast Fourier Transform; this allows an integral representation of code discrepancies in the frequency domain. The RELAP5/MOD2 code has been extensively used at the University of Pisa and the nodalizations of the 4 facilities have been qualified through the application to several experiments performed in the same facilities. (author)

Generation of laser-induced fast neutron and its application

International Nuclear Information System (INIS)

Cha, Hyung Ki; Kwon, D. H.; Nam, S. M.

2010-04-01

The supply of high-efficiency neutron source is still problematic even though a fast neutron source is being accepted increasingly for industrial applications. Radioisotopes and a neutron tube are typically being used, but their neutron flux, lifetime, and price are the limiting factors for more diverse applications. As ultra high power, short pulse laser technologies have been developed, a neutron source generated via laser induced nuclear reaction comes to the fore. The laser induced neutron source has a high peak flux in comparison to the traditional neutron source and is like a point source with its diameter less than 1 mm. These properties can be utilized effectively for the analysis of pulsed fast neutron activation or the studies of a fast neutron material damage and/or recover. The purpose of R and D here is to develop a robust neutron source with a yield of 10 7 neutrons/s, and to carry out a preliminary research for application study in the next research stage

The Fleet Application for Scheduling and Tracking (FAST) Management Website

Science.gov (United States)

Marrero-Perez, Radames J.

2014-01-01

The FAST application was designed to replace the paper and pen method of checking out and checking in GSA Vehicles at KSC. By innovating from a paper and pen based checkout system to a fully digital one, not only the resources wasted by printing the checkout forms have been reduced, but it also reduces significantly the time that users and fleet managers need to interact with the system as well as improving the record accuracy for each vehicle. The vehicle information is pulled from a centralized database server in the SPSDL. In an attempt to add a new feature to the FAST application, the author of this report (alongside the FAST developers) has been designing and developing the FAST Management Website. The GSA fleet managers had to rely on the FAST developers in order to add new vehicles, edit vehicles and previous transactions, or for generating vehicles reports. By providing an easy-to-use FAST Management Website portal, the GSA fleet managers are now able to easily move vehicles, edit records, and print reports.

Novel applications of fast neutron interrogation methods

International Nuclear Information System (INIS)

Gozani, Tsahi

1994-01-01

The development of non-intrusive inspection methods for contraband consisting primarily of carbon, nitrogen, oxygen, and hydrogen requires the use of fast neutrons. While most elements can be sufficiently well detected by the thermal neutron capture process, some important ones, e.g., carbon and in particular oxygen, cannot be detected by this process. Fortunately, fast neutrons, with energies above the threshold for inelastic scattering, stimulate relatively strong and specific gamma ray lines from these elements. The main lines are: 6.13 for O, 4.43 for C, and 5.11, 2.31 and 1.64 MeV for N. Accelerator-generated neutrons in the energy range of 7 to 15 MeV are being considered as interrogating radiations in a variety of non-intrusive inspection systems for contraband, from explosives to drugs and from coal to smuggled, dutiable goods. In some applications, mostly for inspection of small items such as luggage, the decision process involves a rudimentary imaging, akin to emission tomography, to obtain the localized concentration of various elements. This technique is called FNA - Fast Neutron Analysis. While this approach offers improvements over the TNA (Thermal Neutron Analysis), it is not applicable to large objects such as shipping containers and trucks. For these challenging applications, a collimated beam of neutrons is rastered along the height of the moving object. In addition, the neutrons are generated in very narrow nanosecond pulses. The point of their interaction inside the object is determined by the time of flight (TOF) method, that is measuring the time elapsed from the neutron generation to the time of detection of the stimulated gamma rays. This technique, called PFNA (Pulsed Fast Neutron Analysis), thus directly provides the elemental, and by inference, the chemical composition of the material at every volume element (voxel) of the object. The various neutron-based techniques are briefly described below. ((orig.))

Detection-Guided Fast Affine Projection Channel Estimator for Speech Applications

Directory of Open Access Journals (Sweden)

Yan Wu Jennifer

2007-04-01

Full Text Available In various adaptive estimation applications, such as acoustic echo cancellation within teleconferencing systems, the input signal is a highly correlated speech. This, in general, leads to extremely slow convergence of the NLMS adaptive FIR estimator. As a result, for such applications, the affine projection algorithm (APA or the low-complexity version, the fast affine projection (FAP algorithm, is commonly employed instead of the NLMS algorithm. In such applications, the signal propagation channel may have a relatively low-dimensional impulse response structure, that is, the number m of active or significant taps within the (discrete-time modelled channel impulse response is much less than the overall tap length n of the channel impulse response. For such cases, we investigate the inclusion of an active-parameter detection-guided concept within the fast affine projection FIR channel estimator. Simulation results indicate that the proposed detection-guided fast affine projection channel estimator has improved convergence speed and has lead to better steady-state performance than the standard fast affine projection channel estimator, especially in the important case of highly correlated speech input signals.

Applicability of the leak before break concept

International Nuclear Information System (INIS)

1993-06-01

Within the framework of the IAEA Extrabudgetary Programme on the Safety of WWER-440 Model 230 NPPs, a list of safety issues requiring broad studies of general interest have been agreed upon by an Advisory Group which met in Vienna in September 1990. The information on the status of the issues, and on amount of work already completed and under way in various countries, needs to be compiled. Moreover, an evaluation of what further work is required to resolve each of the issues is also necessary. In view of this, the IAEA has started the preparation of a series of status reports on the various issues. This report on the generic safety issue ''Applicability of the Leak Before Break Concept'' presents a comprehensive survey of technical information available in the field and identifies those which require further investigation. 50 refs, 15 figs, 2 tabs

An Improved Cross-Layering Design for IPv6 Fast Handover with IEEE 802.16m Entry Before Break Handover

Science.gov (United States)

Kim, Ronny Yongho; Jung, Inuk; Kim, Young Yong

IEEE 802.16m is an advanced air interface standard which is under development for IMT-Advanced systems, known as 4G systems. IEEE 802.16m is designed to provide a high data rate and a Quality of Service (QoS) level in order to meet user service requirements, and is especially suitable for mobilized environments. There are several factors that have great impact on such requirements. As one of the major factors, we mainly focus on latency issues. In IEEE 802.16m, an enhanced layer 2 handover scheme, described as Entry Before Break (EBB) was proposed and adopted to reduce handover latency. EBB provides significant handover interruption time reduction with respect to the legacy IEEE 802.16 handover scheme. Fast handovers for mobile IPv6 (FMIPv6) was standardized by Internet Engineering Task Force (IETF) in order to provide reduced handover interruption time from IP layer perspective. Since FMIPv6 utilizes link layer triggers to reduce handover latency, it is very critical to jointly design FMIPv6 with its underlying link layer protocol. However, FMIPv6 based on new handover scheme, EBB has not been proposed. In this paper, we propose an improved cross-layering design for FMIPv6 based on the IEEE 802.16m EBB handover. In comparison with the conventional FMIPv6 based on the legacy IEEE 802.16 network, the overall handover interruption time can be significantly reduced by employing the proposed design. Benefits of this improvement on latency reduction for mobile user applications are thoroughly investigated with both numerical analysis and simulation on various IP applications.

Simulation of breaking waves using the high-order spectral method with laboratory experiments: Wave-breaking onset

Science.gov (United States)

Seiffert, Betsy R.; Ducrozet, Guillaume; Bonnefoy, Félicien

2017-11-01

This study investigates a wave-breaking onset criteria to be implemented in the non-linear potential flow solver HOS-NWT. The model is a computationally efficient, open source code, which solves for the free surface in a numerical wave tank using the High-Order Spectral (HOS) method. The goal of this study is to determine the best method to identify the onset of random single and multiple breaking waves over a large domain at the exact time they occur. To identify breaking waves, a breaking onset criteria based on the ratio of local energy flux velocity to the local crest velocity, introduced by Barthelemy et al. (2017) is selected. The breaking parameter is uniquely applied in the numerical model in that calculations of the breaking onset criteria ratio are not made only at the location of the wave crest, but at every point in the domain and at every time step. This allows the model to calculate the onset of a breaking wave the moment it happens, and without knowing anything about the wave a priori. The application of the breaking criteria at every point in the domain and at every time step requires the phase velocity to be calculated instantaneously everywhere in the domain and at every time step. This is achieved by calculating the instantaneous phase velocity using the Hilbert transform and dispersion relation. A comparison between more traditional crest-tracking techniques shows the calculation of phase velocity using Hilbert transform at the location of the breaking wave crest provides a good approximation of crest velocity. The ability of the selected wave breaking criteria to predict single and multiple breaking events in two dimensions is validated by a series of large-scale experiments. Breaking waves are generated by energy focusing and modulational instability methods, with a wide range of primary frequencies. Steep irregular waves which lead to breaking waves, and irregular waves with an energy focusing wave superimposed are also generated. This set of

How fast is the Patagonian shelf-break acidifying?

Science.gov (United States)

Orselli, Iole B. M.; Kerr, Rodrigo; Ito, Rosane G.; Tavano, Virginia M.; Mendes, Carlos Rafael B.; Garcia, Carlos A. E.

2018-02-01

Anthropogenic carbon (Cant) concentration is determined according to the TrOCA method, from carbonate system data and hydrographic parameters collected during two consecutive spring cruises (2007 and 2008) in the Argentinean Patagonian shelf-break zone between 36°S and 50°S. Cant has intruded the water column until intermediate depths, with no Cant below 1000 m, in the deeper waters (i.e., North Atlantic Deep Water and Antarctic Bottom Water) of the Northern sector of the study area (i.e., North of 38°S). The higher Cant concentration is observed in Subantarctic Shelf Water in the Southern region, whereas in the Northern sector both Tropical Water and South Atlantic Central Water are equally affected by Cant intrusion. The Antarctic Intermediate Water represents the depth-limit achieved by Cant penetration, reinforcing the role that this water mass plays as an important vehicle to transport Cant to the oceans interior. The estimated Cant average (± method precision) is 46.6 ± 5.3 μmol kg- 1, considering the full depth of the water column. The ocean acidification state (ΔpH) shows an average (± standard deviation) of - 0.11 ± 0.05, thus, indicating an annual pH reduction of - 0.0010 yr- 1 since the Industrial Revolution (c.a. 1750). The degree of aragonite saturation is lowered towards undersaturation levels of calcite. The Patagonian shelf and shelf-break zones-a strong CO2 sink region in the global ocean-are likely a key area for Cant intrusion in the southwestern South Atlantic Ocean.

Role of phase breaking processes on resonant spin transfer torque nano-oscillators

Science.gov (United States)

Sharma, Abhishek; Tulapurkar, Ashwin A.; Muralidharan, Bhaskaran

2018-05-01

Spin transfer torque nano-oscillators (STNOs) based on magnetoresistance and spin transfer torque effects find potential applications in miniaturized wireless communication devices. Using the non-coherent non-equilibrium Green's function spin transport formalism self-consistently coupled with the stochastic Landau-Lifshitz-Gilbert-Slonczewski's equation and the Poisson's equation, we elucidate the role of elastic phase breaking on the proposed STNO design featuring double barrier resonant tunneling. Demonstrating the immunity of our proposed design, we predict that despite the presence of elastic dephasing, the resonant tunneling magnetic tunnel junction structures facilitate oscillator designs featuring a large enhancement in microwave power up to 8μW delivered to a 50Ω load.

Simulation of breaking waves using the high-order spectral method with laboratory experiments: wave-breaking energy dissipation

Science.gov (United States)

Seiffert, Betsy R.; Ducrozet, Guillaume

2018-01-01

We examine the implementation of a wave-breaking mechanism into a nonlinear potential flow solver. The success of the mechanism will be studied by implementing it into the numerical model HOS-NWT, which is a computationally efficient, open source code that solves for the free surface in a numerical wave tank using the high-order spectral (HOS) method. Once the breaking mechanism is validated, it can be implemented into other nonlinear potential flow models. To solve for wave-breaking, first a wave-breaking onset parameter is identified, and then a method for computing wave-breaking associated energy loss is determined. Wave-breaking onset is calculated using a breaking criteria introduced by Barthelemy et al. (J Fluid Mech https://arxiv.org/pdf/1508.06002.pdf, submitted) and validated with the experiments of Saket et al. (J Fluid Mech 811:642-658, 2017). Wave-breaking energy dissipation is calculated by adding a viscous diffusion term computed using an eddy viscosity parameter introduced by Tian et al. (Phys Fluids 20(6): 066,604, 2008, Phys Fluids 24(3), 2012), which is estimated based on the pre-breaking wave geometry. A set of two-dimensional experiments is conducted to validate the implemented wave breaking mechanism at a large scale. Breaking waves are generated by using traditional methods of evolution of focused waves and modulational instability, as well as irregular breaking waves with a range of primary frequencies, providing a wide range of breaking conditions to validate the solver. Furthermore, adjustments are made to the method of application and coefficient of the viscous diffusion term with negligible difference, supporting the robustness of the eddy viscosity parameter. The model is able to accurately predict surface elevation and corresponding frequency/amplitude spectrum, as well as energy dissipation when compared with the experimental measurements. This suggests the model is capable of calculating wave-breaking onset and energy dissipation

Automatic first-break picking using the instantaneous traveltime attribute

KAUST Repository

Saragiotis, Christos

2012-01-01

Picking the first breaks is an important step in seismic processing. The large volume of the seismic data calls for automatic and objective picking. We introduce a new automatic first-break picker, which uses specifically designed time windows and an iterative procedure based on the instantaneous traveltime attribute. The method is fast as it only uses a few FFT\\'s per trace. We demonstrate the effectiveness of this automatic method by applying it on real test data.

Review of pipe-break probability assessment methods and data for applicability to the advanced neutron source project for Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Fullwood, R.R.

1989-04-01

The Advanced Neutron Source (ANS) (Difilippo, 1986; Gamble, 1986; West, 1986; Selby, 1987) will be the world's best facility for low energy neutron research. This performance requires the highest flux density of all non-pulsed reactors with concomitant low thermal inertial and fast response to upset conditions. One of the primary concerns is that a flow cessation of the order of a second may result in fuel damage. Such a flow stoppage could be the result of break in the primary piping. This report is a review of methods for assessing pipe break probabilities based on historical operating experience in power reactors, scaling methods, fracture mechanics and fracture growth models. The goal of this work is to develop parametric guidance for the ANS design to make the event highly unlikely. It is also to review and select methods that may be used in an interactive IBM-PC model providing fast and reasonably accurate models to aid the ANS designers in achieving the safety requirements. 80 refs., 7 figs

Application of reflective memory network in Tokamak fast controller

International Nuclear Information System (INIS)

Weng Chuqiao; Zhang Ming; Liu Rui; Zheng Wei; Zhuang Ge

2014-01-01

A specific application of reflective memory network in Tokamak fast controller was introduced in this paper. The PMC-5565 reflective memory card and ACC-5565 network hub were used to build a reflective memory real-time network to test its real- time function. The real-time, rapidity and determinacy of the time delay for fast controller controlling power device under the reflective memory network were tested in the LabVIEW RT real-time operation system. Depending on the reflective memory technology, the data in several fast controllers were synchronized, and multiple control tasks using a single control task were finished. The experiment results show that the reflective memory network can meet the real-time requirements for fast controller to perform the feedback control over devices. (authors)

Fast imaging applications in the Nuclear Test Program

International Nuclear Information System (INIS)

Lear, R.

1983-01-01

Applications of fast imaging employ both streak cameras and fast framing techniques. Image intensifier tubes are gated to provide fast two-dimensional shutters of 2 to 3 ns duration with shatter ratios of greater than 10 6 and resolution greater than 10 4 pixels. Shutters of less than 1 ns have been achieved with experimental tubes. Characterization data demonstrate the importance of tube and pulser design. Streak cameras are used to simultaneously record temporal and intensity information from up to 200 spatial points. Streak cameras are combined with remote readout for downhole uses and are coupled to fiber optic cables for uphole uses. Optical wavelength multiplexing is being studied as a means of compressing additional image data onto optical fibers. Performance data demonstrate trade-offs between image resolution and system sensitivity

Research progress on dam-break floods

KAUST Repository

Wu, Jiansong; Bao, Kai; Zhang, Hui

2011-01-01

Because of the catastrophic effects downstream of dam-break failure, more and more researchers around the world have been working on the study of dam-break flows to accurately forecast the downstream inundation mapping. With the rapid development of computer hardware and computing techniques, numerical study on dam-break flows has been a popular research subject. In the paper, the numerical methodologies used to solve the governing partial differential equations of dam-break flows are classified and summarized, and their characteristics and applications are discussed respectively. Furthermore, the fully-developed mathematical models developed in recent decades are reviewed, and also introduced the authors' on-going work. Finally, some possible future developments on modeling the dam-break flows and some solutions are presented and discussed. © 2011 IEEE.

Research progress on dam-break floods

KAUST Repository

Wu, Jiansong

2011-08-01

Because of the catastrophic effects downstream of dam-break failure, more and more researchers around the world have been working on the study of dam-break flows to accurately forecast the downstream inundation mapping. With the rapid development of computer hardware and computing techniques, numerical study on dam-break flows has been a popular research subject. In the paper, the numerical methodologies used to solve the governing partial differential equations of dam-break flows are classified and summarized, and their characteristics and applications are discussed respectively. Furthermore, the fully-developed mathematical models developed in recent decades are reviewed, and also introduced the authors\\' on-going work. Finally, some possible future developments on modeling the dam-break flows and some solutions are presented and discussed. © 2011 IEEE.

Establishment of a markerless mutation delivery system in Bacillus subtilis stimulated by a double-strand break in the chromosome.

Directory of Open Access Journals (Sweden)

Ting Shi

Full Text Available Bacillus subtilis has been a model for gram-positive bacteria and it has long been exploited for industrial and biotechnological applications. However, the availability of facile genetic tools for physiological analysis has generally lagged substantially behind traditional genetic models such as Escherichia coli and Saccharomyces cerevisiae. In this work, we have developed an efficient, precise and scarless method for rapid multiple genetic modifications without altering the chromosome of B. subtilis. This method employs upp gene as a counter-selectable marker, double-strand break (DSB repair caused by exogenous endonuclease I-SceI and comK overexpression for fast preparation of competent cell. Foreign dsDNA can be simply and efficiently integrated into the chromosome by double-crossover homologous recombination. The DSB repair is a potent inducement for stimulating the second intramolecular homologous recombination, which not only enhances the frequency of resolution by one to two orders of magnitude, but also selects for the resolved product. This method has been successfully and reiteratively used in B. subtilis to deliver point mutations, to generate in-frame deletions, and to construct large-scale deletions. Experimental results proved that it allowed repeated use of the selectable marker gene for multiple modifications and could be a useful technique for B. subtilis.

Effects of a DVD-delivered exercise program on patterns of sedentary behavior in older adults: a randomized controlled trial.

Science.gov (United States)

Fanning, J; Porter, G; Awick, E A; Wójcicki, T R; Gothe, N P; Roberts, S A; Ehlers, D K; Motl, R W; McAuley, E

2016-06-01

In the present study, we examined the influence of a home-based, DVD-delivered exercise intervention on daily sedentary time and breaks in sedentary time in older adults. Between 2010 and 2012, older adults (i.e., aged 65 or older) residing in Illinois (N = 307) were randomized into a 6-month home-based, DVD-delivered exercise program (i.e., FlexToBa; FTB) or a waitlist control. Participants completed measurements prior to the first week (baseline), following the intervention period (month 6), and after a 6 month no-contact follow-up (month 12). Sedentary behavior was measured objectively using accelerometers for 7 consecutive days at each time point. Differences in daily sedentary time and breaks between groups and across the three time points were examined using mixed-factor analysis of variance (mixed ANOVA) and analysis of covariance (ANCOVA). Mixed ANOVA models revealed that daily minutes of sedentary time did not differ by group or time. The FTB condition, however, demonstrated a greater number of daily breaks in sedentary time relative to the control condition (p = .02). ANCOVA models revealed a non-significant effect favoring FTB at month 6, and a significant difference between groups at month 12 (p = .02). While overall sedentary time did not differ between groups, the DVD-delivered exercise intervention was effective for maintaining a greater number of breaks when compared with the control condition. Given the accumulating evidence emphasizing the importance of breaking up sedentary time, these findings have important implications for the design of future health behavior interventions.

Preliminary examination of the applicability of imaging plates to fast neutron radiography

International Nuclear Information System (INIS)

Matsubayashi, Masahito; Hibiki, Takashi; Mishima, Kaichiro; Yoshii, Koji; Okamoto, Koji

2001-01-01

Fast neutron radiography is an attractive non-destructive inspection technique because of the excellent penetration characteristics of fast neutrons in matter. However, the difficulty of detecting fast neutrons reduces this attractive feature. As an experiment to overcome the difficulty, imaging plates were applied to fast neutron radiography. A simple combination of two sheets of imaging plates and a sheet of polyethylene as a proton emitter was examined with the (fast neutron, thermal neutron and gamma ray) FTG discriminator proposed by Yoneda et al. . The experimental results showed that the method could be applicable to fast neutron radiography with effective discrimination of γ-rays

In vivo quantification of DNA double strand breaks

International Nuclear Information System (INIS)

Simonsson, M.; Qvarnstroem, F.; Turesson, I.; Johansson, K.-A.; Nyman, J.; Hermansson, I.; Oden, A.; Book, M.

2003-01-01

DNA double strand breaks (DSBs) can be introduced in the genome by exposure to exogenous agents such as ionising radiation and radio-mimetic chemicals. The biological importance of these breaks is significant even at low numbers. Inaccurate repair or lack of repair of a single DSB has the potential to kill a cell or lead to tumourigenesis. Thus the induction and repair of DSBs are crucial events in the onset of malignancies. Following the induction of DSBs, the core histone H2AX is rapidly phosphorylated at residue serine 139. This phosphorylated form of H2AX is referred to as gH2AX. Histones wrapped in megabase regions flanking these breaks are involved in this process, which results in the formation of discrete nuclear foci. It has previously been shown that a single DSB is sufficient to produce a detectable focus. So far there has been a lack of methods capable of measuring the amount of DSBs at clinically relevant quantities. Such a method would embrace a wide field of applications. It could be applied as a biological dosimeter when studying carcinogenic effects and provide the basis for an assay predicting individual radiosensitivity. We describe a measurement procedure that detects and quantifies small amounts of DSBs in vivo. This is accomplished using immunofluorescence detection of the molecular marker gH2AX. The gH2AX foci are quantified in histological sections using basic digital image analysis methods as the main component. In a primary assessment of the procedure we analysed the in vivo dose response of prostate cancer patients in clinical practice undergoing radiotherapy. Epidermal nucleated cells in skin biopsies taken 30 minutes following the first single dose delivered show linear dose response for low doses ranging from 0 - 1.2 Gy. The described procedure for double strand break quantification can detect dose changes as low as 0.18 Gy

Lead plant application of leak-before-break to high energy piping. Final report, January 1989

International Nuclear Information System (INIS)

1989-01-01

This report presents the experience gained during a successful application of a leak-before-break program by Duquesne Light Company. This program was directed at the high energy nuclear piping at Beaver Valley Power Station - Unit 2. This experience can be applied to other nuclear plant leak-before-break efforts in order to minimize the number of pipe whip restraints, jet impingement shields, snubbers, and to discount the consideration of remaining pipe rupture dynamic effects. The chronology of events leading to Nuclear Regulatory Commission approval of the Beaver Valley Power Station - Unit 2 lead plant effort is described. The final report and pertinent sections of the final Safety Evaluation Report are also included. (author)

TACIS 91: Application of leak-before-break concept in VVER 440-230

Energy Technology Data Exchange (ETDEWEB)

Bartholome, G.; Faidy, C.; Franco, C. [and others

1997-04-01

The applicability of the leak-before-break (LBB) concept for primary piping in the first generation of WWER type plants in Russia is investigated. The procedures for LBB behavior used in France and Germany are applied, and the evaluation is discussed within the framework of the European Technical Assistance for the Community of Independent States (TACIS) project. Emphasis is placed on experimental validation of national and international engineering practice for evaluating and optimizing existing installations. Design criteria of WWER plants are compared to western standard design.

Slow and fast light effects in semiconductor waveguides for applications in microwave photonics

DEFF Research Database (Denmark)

Xue, Weiqi; Chen, Yaohui; Öhman, Filip

2009-01-01

We review the theory of slow and fast light effects due to coherent population oscillations in semiconductor waveguides, and potential applications of these effects in microwave photonic systems as RF phase shifters. In order to satisfy the application requirement of 360º RF phase shift at differ......We review the theory of slow and fast light effects due to coherent population oscillations in semiconductor waveguides, and potential applications of these effects in microwave photonic systems as RF phase shifters. In order to satisfy the application requirement of 360º RF phase shift...

Increasing self-regulatory energy using an Internet-based training application delivered by smartphone technology.

Science.gov (United States)

Cranwell, Jo; Benford, Steve; Houghton, Robert J; Golembewski, Michael; Golembewksi, Michael; Fischer, Joel E; Hagger, Martin S

2014-03-01

Self-control resources can be defined in terms of "energy." Repeated attempts to override desires and impulses can result in a state of reduced self-control energy termed "ego depletion" leading to a reduced capacity to regulate future self-control behaviors effectively. Regular practice or "training" on self-control tasks may improve an individual's capacity to overcome ego depletion effectively. The current research tested the effectiveness of training using a novel Internet-based smartphone application to improve self-control and reduce ego depletion. In two experiments, participants were randomly assigned to either an experimental group, which received a daily program of self-control training using a modified Stroop-task Internet-based application delivered via smartphone to participants over a 4-week period, or a no-training control group. Participants assigned to the experimental group performed significantly better on post-training laboratory self-control tasks relative to participants in the control group. Findings support the hypothesized training effect on self-control and highlight the effectiveness of a novel Internet-based application delivered by smartphone as a practical means to administer and monitor a self-control training program. The smartphone training application has considerable advantages over other means to train self-control adopted in previous studies in that it has increased ecological validity and enables effective monitoring of compliance with the training program.

Very fast kicker for accelerator applications

International Nuclear Information System (INIS)

Grishanov, B.I.; Podgorny, F.V.; Shiltsev, V.D.

1996-11-01

We describe a very fast counter traveling wave kicker with a full pulse width of about 7 ns. Successful test experiment has been done with hi-tech semiconductor technology FET pulse generator with a MHz- range repetition rates and maximum kick strength of the order of 3 G·m. Further. increase of the strength seems to be quite possible with the FET pursers, that makes the kicker to be very useful tool for bunch-by-bunch injection/extraction and other accelerator applications

Acropolis: A Fast Protoyping Robotic Application

Directory of Open Access Journals (Sweden)

Vincent Zalzal

2009-03-01

Full Text Available Acropolis is an open source middleware robotic framework for fast software prototyping and reuse of program codes. It is made up of a core software and a collection of several extension modules called plugins. Each plugin encapsulates a specific functionality needed for robotic applications. To design a robot behavior, a circuit of the involved plugins is built with a graphical user interface. A high degree of decoupling between components and a graph-based representation allow the user to build complex robot behaviors with minimal need for code writing. In addition, the Acropolis core is hardware platform independent. Well-known design patterns and layered software architecture are its key features. Through the description of three applications, we illustrate some of its usability.

Generation of laser-induced fast neutron and its application

International Nuclear Information System (INIS)

Cha, Hyung Ki; Lee, S.; Kwon, D.; Nam, S.; Park, S.; Rhee, Y.; Jung, Y.; Lee, K.; Cha, Y.; Kwon, S.; Lim, C.; Han, J.; Park, S.; Chung, C.

2012-04-01

The supply of high-efficiency neutron source is still problematic even though a fast neutron source is being accepted increasingly for industrial applications. Radioisotopes and a neutron tube are typically being used, but their neutron flux, lifetime, and price are the limiting factors for more diverse applications. As ultra high power, short pulse laser technologies have been developed, a neutron source generated via laser induced nuclear reaction comes to the fore. The laser induced neutron source has a high peak flux in comparison to the traditional neutron source and is like a point source with its diameter less than 1 mm. These properties can be utilized effectively for the analysis of pulsed fast neutron activation or the studies of a fast neutron material damage and/or recover. The purpose of R and D here is to develop a robust neutron source with a yield of 107 neutrons/s during 1st R and D stage ('07 ∼ '09) and to construct a stable laser neutron source in longer operation and to demonstrate its usefulness for a neutron activation analysis of explosive materials and a neutron impact analysis of crystalline in the second R and D stage ('10 ∼ '11)

The IAEA Activities in the Field of Fast Reactors Technology Development

International Nuclear Information System (INIS)

Monti, Stefano

2011-01-01

Main activities of the IAEA Programme on Fast Reactor: Carry out Collaborative Research Projects (CRPs) of common interest to the TWG-FR Member States in the field of FRs and ADS; Secure Training and Education in the field of fast neutron system physics, technology and applications; Support Fast Reactor data retrieval and knowledge preservation activities in MSs; Provide support to IAEA Nuclear Safety and Security Department for preparation of fast reactor Safety standards / requirements / guides. IAEA TWG-FR Functions: Provide advice and guidance, and marshal support in their countries for implementation of IAEA’s programmatic activities in the area of advanced technologies and R&D for fast reactors and sub-critical hybrid systems for energy production and for utilization/transmutation of long-lived nuclides; Provide a forum for information and knowledge sharing on national and international development programs; Act as a link between IAEA’s activities in the specific area of the TWG-FR and national scientific communities, delivering information from and to national communities

Symmetry breaking in nematic liquid crystals: analogy with cosmology and magnetism.

Science.gov (United States)

Repnik, R; Ranjkesh, A; Simonka, V; Ambrozic, M; Bradac, Z; Kralj, S

2013-10-09

Universal behavior related to continuous symmetry breaking in nematic liquid crystals is studied using Brownian molecular dynamics. A three-dimensional lattice system of rod-like objects interacting via the Lebwohl-Lasher interaction is considered. We test the applicability of predictions originally derived in cosmology and magnetism. In the first part we focus on coarsening dynamics following the temperature driven isotropic-nematic phase transition for different quench rates. The behavior in the early coarsening regime supports predictions made originally by Kibble in cosmology. For fast enough quenches, symmetry breaking and causality give rise to a dense tangle of defects. When the degree of orientational ordering is large enough, well defined protodomains characterized by a single average domain length are formed. With time subcritical domains gradually vanish and supercritical domains grow with time, exhibiting a universal scaling law. In the second part of the paper we study the impact of random-field-type disorder on a range of ordering in the (symmetry broken) nematic phase. We demonstrate that short-range order is observed even for a minute concentration of impurities, giving rise to disorder in line with the Imry-Ma theorem prediction only for the appropriate history of systems.

Fast and sensitive detection of indels induced by precise gene targeting

DEFF Research Database (Denmark)

Yang, Zhang; Steentoft, Catharina; Hauge, Camilla

2015-01-01

The nuclease-based gene editing tools are rapidly transforming capabilities for altering the genome of cells and organisms with great precision and in high throughput studies. A major limitation in application of precise gene editing lies in lack of sensitive and fast methods to detect...... and characterize the induced DNA changes. Precise gene editing induces double-stranded DNA breaks that are repaired by error-prone non-homologous end joining leading to introduction of insertions and deletions (indels) at the target site. These indels are often small and difficult and laborious to detect...

Use break-even analysis to optimize bit runs

International Nuclear Information System (INIS)

Kelly, J. Jr.

1992-01-01

Applying a technique known as break-even analysis during the bit selection process enables the operator to more definitively estimate drilling costs. The break-even chart can be used in a variety of ways to evaluate bit and operating parameter alternatives. Frequent application of this technique significantly improves the user's understanding of drilling economics and their ability to plan more effective drilling programs. This paper reports on several examples of drilling cost estimates obtained through application of the break-even analysis, which determines the bit performance required to match established drilling cost records in similar applications. It is especially helpful when new bit features are being considered for the first time. Two common examples with today's rolling cutter bits are changes from steel teeth to tungsten carbide inserts (TCI) and O-ring to metal bearing seals

An Application of Break-Even Analysis To Determine the Costs Associated with the Implementation of an Off-Campus Bachelor Degree Completion Program.

Science.gov (United States)

Satterlee, Brian

This paper applies the management science tool of break-even analysis to determine the costs of implementing an off-campus bachelor degree completion program at a four-year private liberal arts college. The first section describes break-even analysis which, in this application, is calculated by dividing the total annual cost for a cohort of…

Chiral symmetry and chiral-symmetry breaking

International Nuclear Information System (INIS)

Peskin, M.E.

1982-12-01

These lectures concern the dynamics of fermions in strong interaction with gauge fields. Systems of fermions coupled by gauge forces have a very rich structure of global symmetries, which are called chiral symmetries. These lectures will focus on the realization of chiral symmetries and the causes and consequences of thier spontaneous breaking. A brief introduction to the basic formalism and concepts of chiral symmetry breaking is given, then some explicit calculations of chiral symmetry breaking in gauge theories are given, treating first parity-invariant and then chiral models. These calculations are meant to be illustrative rather than accurate; they make use of unjustified mathematical approximations which serve to make the physics more clear. Some formal constraints on chiral symmetry breaking are discussed which illuminate and extend the results of our more explicit analysis. Finally, a brief review of the phenomenological theory of chiral symmetry breaking is presented, and some applications of this theory to problems in weak-interaction physics are discussed

Pseudorandom Recursions: Small and Fast Pseudorandom Number Generators for Embedded Applications

Directory of Open Access Journals (Sweden)

Petruska Gyorgy

2007-01-01

Full Text Available Many new small and fast pseudorandom number generators are presented, which pass the most common randomness tests. They perform only a few, nonmultiplicative operations for each generated number, use very little memory, therefore, they are ideal for embedded applications. We present general methods to ensure very long cycles and show, how to create super fast, very small ciphers and hash functions from them.

Pseudorandom Recursions: Small and Fast Pseudorandom Number Generators for Embedded Applications

Directory of Open Access Journals (Sweden)

Gyorgy Petruska

2007-02-01

Full Text Available Many new small and fast pseudorandom number generators are presented, which pass the most common randomness tests. They perform only a few, nonmultiplicative operations for each generated number, use very little memory, therefore, they are ideal for embedded applications. We present general methods to ensure very long cycles and show, how to create super fast, very small ciphers and hash functions from them.

′BREAKS′ protocol for breaking bad news

Directory of Open Access Journals (Sweden)

Vijayakumar Narayanan

2010-01-01

Full Text Available Information that drastically alters the life world of the patient is termed as bad news. Conveying bad news is a skilled communication, and not at all easy. The amount of truth to be disclosed is subjective. A properly structured and well-orchestrated communication has a positive therapeutic effect. This is a process of negotiation between patient and physician, but physicians often find it difficult due to many reasons. They feel incompetent and are afraid of unleashing a negative reaction from the patient or their relatives. The physician is reminded of his or her own vulnerability to terminal illness, and find themselves powerless over emotional distress. Lack of sufficient training in breaking bad news is a handicap to most physicians and health care workers. Adherence to the principles of client-centered counseling is helpful in attaining this skill. Fundamental insight of the patient is exploited and the bad news is delivered in a structured manner, because the patient is the one who knows what is hurting him most and he is the one who knows how to move forward. Six-step SPIKES protocol is widely used for breaking bad news. In this paper, we put forward another six-step protocol, the BREAKS protocol as a systematic and easy communication strategy for breaking bad news. Development of competence in dealing with difficult situations has positive therapeutic outcome and is a professionally satisfying one.

‘BREAKS’ Protocol for Breaking Bad News

Science.gov (United States)

Narayanan, Vijayakumar; Bista, Bibek; Koshy, Cheriyan

2010-01-01

Information that drastically alters the life world of the patient is termed as bad news. Conveying bad news is a skilled communication, and not at all easy. The amount of truth to be disclosed is subjective. A properly structured and well-orchestrated communication has a positive therapeutic effect. This is a process of negotiation between patient and physician, but physicians often find it difficult due to many reasons. They feel incompetent and are afraid of unleashing a negative reaction from the patient or their relatives. The physician is reminded of his or her own vulnerability to terminal illness, and find themselves powerless over emotional distress. Lack of sufficient training in breaking bad news is a handicap to most physicians and health care workers. Adherence to the principles of client-centered counseling is helpful in attaining this skill. Fundamental insight of the patient is exploited and the bad news is delivered in a structured manner, because the patient is the one who knows what is hurting him most and he is the one who knows how to move forward. Six-step SPIKES protocol is widely used for breaking bad news. In this paper, we put forward another six-step protocol, the BREAKS protocol as a systematic and easy communication strategy for breaking bad news. Development of competence in dealing with difficult situations has positive therapeutic outcome and is a professionally satisfying one. PMID:21811349

Substitution models for overlapping technologies - an application to fast reactor deployment

International Nuclear Information System (INIS)

Lehtinen, R.; Silvennoinen, P.; Vira, J.

1982-01-01

In this paper market penetration models are discussed in the context of interacting technologies. An increased confidence credit is proposed for a technology that can draw on other overlapping technologies. The model is also reduced to a numerically tractable form. As an application, scenarios of fast reactor deployment are derived under different assumptions on the uranium and fast reactor investment costs and by varying model parameters for the penetration of fusion and solar technologies. The market share of fast reactors in electricity generation is expected to lie between zero and 40 per cent in 2050 depending on the market parameters. (orig.) [de

Ramadan fasting and dental treatment considerations: a review.

Science.gov (United States)

Shaeesta, Khaleelahmed Bhavikatti; Prabhuji, M Lv; Shruthi, J R

2015-01-01

During the sacred month of Ramadan, Muslims abstain from the consumption of food from dawn until dusk. Extended fasting hours produce changes in the body's metabolism during this period. A majority of the population who fast also restrict themselves from undergoing dental treatments due to a fear of breaking the fast. Even among health professionals, a certain amount of uncertainty prevails about the implications of treating a patient who is fasting. To help clinicians carry out safe and effective treatment without hampering a patient's religious beliefs, the present article focuses on the effect of Ramadan fasting on the body's metabolism and the ramifications for treatment aspects, including medications and dental procedures.

Application of break preclusion concept in German nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Roos, E. [Energie-Versorgung Schwaben AG, Stuttgart (Germany); Maier, V. [Bayernwerk AG, Muenchen (Germany); Nagel, G. [PraussenElektra AG, Hannover (Germany)] [and others

1997-04-01

The break preclusion concept is based on {open_quotes}KTA rules{close_quotes}, {open_quotes}RSK guidelines{close_quotes} and {open_quotes}Rahmenspeziflkation Basissicherheit{close_quotes}. These fundamental rules containing for example requirements on material, design, calculation, manufacturing and testing procedures are explained and the technical realisation is shown by means of examples. The proof of the quality of these piping systems can be executed by means of fracture mechanics calculations by showing that in every case the leakage monitoring system already detect cracks which are clearly smaller than the critical crack. Thus the leak before break behavior and the break preclusion concept is implicitly affirmed. In order to further diminish conservativities in the fracture mechanics procedures, specific research projects are executed which are explained in this contribution.

The {open_quotes}leak-before-break{close_quotes} applicability in decision support system {open_quotes}strength{close_quotes}

Energy Technology Data Exchange (ETDEWEB)

Torop, V.M.; Orynyak, I.V. [Institute for Problems of Strength, Kiev (Ukraine); Kutovoy, O.L. [Institute of Structure Integrity, Kiev (Ukraine)

1997-04-01

A software decision support system, STRENGTH, for application of leak before break analysis, is described. The background methodology and sample application are outlined. The program allows multioptional computation of loading parameters for different types of defects, and variable properties for metals and welded joints. Structural strength is assessed, and service life predictions are made. The program is used to analyze specific defects identified by nondestructive testing.

Benchmark test of evaluated nuclear data files for fast reactor neutronics application

International Nuclear Information System (INIS)

Chiba, Go; Hazama, Taira; Iwai, Takehiko; Numata, Kazuyuki

2007-07-01

A benchmark test of the latest evaluated nuclear data files, JENDL-3.3, JEFF-3.1 and ENDF/B-VII.0, has been carried out for fast reactor neutronics application. For this benchmark test, experimental data obtained at fast critical assemblies and fast power reactors are utilized. In addition to comparing of numerical solutions with the experimental data, we have extracted several cross sections, in which differences between three nuclear data files affect significantly numerical solutions, by virtue of sensitivity analyses. This benchmark test concludes that ENDF/B-VII.0 predicts well the neutronics characteristics of fast neutron systems rather than the other nuclear data files. (author)

Breaking Bad News: An Evidence-Based Review of Communication Models for Oncology Nurses.

Science.gov (United States)

Bumb, Meridith; Keefe, Joanna; Miller, Lindsay; Overcash, Janine

2017-10-01

A diagnosis of cancer is a stressful, difficult, and life-altering event. Breaking bad news is distressing to patients and families and is often uncomfortable for the nurse delivering it. Evidence-based communication models have been developed and adapted for use in clinical practice to assist nurses with breaking bad news.

. The purpose of this article is to provide an overview on breaking bad news and to review the utility of the SPIKES and PEWTER evidence-based communication models for oncology nurses.
. Perceptions of breaking bad news from the nurse and patient perspectives, as well as barriers and consequences to effective communication, will be presented. Clinical examples of possible situations of breaking bad news will demonstrate how to use the SPIKES and PEWTER models of communication when disclosing bad news to patients and their families.
. By using the evidence-based communication strategies depicted in this article, oncology nurses can support the delivery of bad news and maintain communication with their patients and their patients' families in an effective and productive manner.

Role of specific geographic landscapes in city break destinations

Directory of Open Access Journals (Sweden)

Štetić Snežana

2009-01-01

Full Text Available Urban tourist destinations or City Break destinations are representing one of main destination products on tourist market. City Break destinations are big cities, administrative, economic and political centers of states and regions. These cities are 'open' 24 hours per day, seven days in week. Inside these tourist destination we can find different range of products (culture, entertainment, recreation, leisure, history, modern infrastructure. In these destinations season is not present and it lasts trough out the year. Promotional campaigns in City Break destinations are truing to create distinguished images in tourists mind as also as on investors, consumers and future residents. They emphasize advantages that those cities are delivering to their consumers, but often we forget that all these cities are having specific geographic landscapes. In the era of limiting of mass tourism to preserve resources for future generations and emphasizing the importance of sustainable development for tourism perspectives, the importance of specific geographic landscapes inside urban destinations for their further development as tourist destinations an their overall development is slightly neglected.

Practical applications of the R6 leak-before-break procedure

International Nuclear Information System (INIS)

Bouchard, P.J.

1997-01-01

A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450 degrees C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choice of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems

Practical applications of the R6 leak-before-break procedure

Energy Technology Data Exchange (ETDEWEB)

Bouchard, P.J.

1997-04-01

A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450{degrees}C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choice of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems.

Break preclusion concept and its application to the EPRTM reactor

Energy Technology Data Exchange (ETDEWEB)

Chapuliot, S., E-mail: stephane.chapuliot@areva.com; Migné, C.

2014-04-01

This paper provides a synthesis of the technical basis supporting the break preclusion concept and its implementation on the Main Coolant Lines and Main Steam Lines of the EPR™ reactor. In a first step, it describes the background of the break preclusion concept, and then it details the requirements associated to its implementation in a Defense In Depth approach.In second steps, main benefits and few illustrative examples are given for the MCL.

Study of Water-Oil Emulsion Breaking by Stabilized Solution Consisting of Anionic Surface Acting Agent - Soda Ash - Polymer (ASP)

Science.gov (United States)

Kulichkov, S. V.; Avtomonov, E. G.; Andreeva, L. V.; Solomennik, S. F.; Nikitina, A. V.

2018-01-01

The paper provides a laboratory research of breaking natural water-oil emulsions: - by non-stabilized ASP; by stabilized ASP; by mixture of stabilized and non-stabilized ASP in different proportions and production of refinery water of the required quality with the use of IronGuard 2495 as flocculant. Oil-in-water emulsion is stable. Classic methods are not suitable for residual water treatment: sediment gravity flow; filtration; centrifuge test. Microemulsion formed after ASP application has low boundary tension and high pH. It contributes to transfer of oil phase into a water one, forming oil-in-water emulsion. Alkaline condition has adverse effect on demulsifying ability of agents, flocculation and boundary tension. For breaking of water-oil emulsion at EBU before the interchanger water or water-oil emulsion from the wells that were not APS-treated in ratio of 1:9 shall be delivered. Residual water after EBU must be prepared in water tanks by dilution in great volume.

Consistency of Trend Break Point Estimator with Underspecified Break Number

Directory of Open Access Journals (Sweden)

Jingjing Yang

2017-01-01

Full Text Available This paper discusses the consistency of trend break point estimators when the number of breaks is underspecified. The consistency of break point estimators in a simple location model with level shifts has been well documented by researchers under various settings, including extensions such as allowing a time trend in the model. Despite the consistency of break point estimators of level shifts, there are few papers on the consistency of trend shift break point estimators in the presence of an underspecified break number. The simulation study and asymptotic analysis in this paper show that the trend shift break point estimator does not converge to the true break points when the break number is underspecified. In the case of two trend shifts, the inconsistency problem worsens if the magnitudes of the breaks are similar and the breaks are either both positive or both negative. The limiting distribution for the trend break point estimator is developed and closely approximates the finite sample performance.

EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA); Scientific Opinion on the substantiation of a health claim related to coffee C21 and reduction of spontaneous DNA strand breaks pursuant to Article 13(5) of Regulation (EC) No 1924/2006

DEFF Research Database (Denmark)

Tetens, Inge

of coffee compared to water on spontaneous DNA strand breaks. The evidence provided in animal and in vitro studies is not sufficient to predict the occurrence of an effect of coffee C21 consumption on the reduction of spontaneous DNA strand breaks in humans. The Panel concludes that a cause and effect......Following an application from Tchibo GmbH, submitted pursuant to Article 13(5) of Regulation (EC) No 1924/2006 via the Competent Authority of Germany, the Panel on Dietetic Products, Nutrition and Allergies was asked to deliver an opinion on the scientific substantiation of a health claim related...... to coffee C21 and reduction of spontaneous DNA strand breaks. The scope of the application was proposed to fall under a health claim based on newly developed scientific evidence. The food constituent that is the subject of the health claim is coffee C21, which is sufficiently characterised. The claimed...

Unification of SUSY breaking and GUT breaking

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, Tatsuo [Department of Physics, Hokkaido University,Sapporo 060-0810 (Japan); Omura, Yuji [Department of Physics, Nagoya University,Nagoya 464-8602 (Japan)

2015-02-18

We build explicit supersymmetric unification models where grand unified gauge symmetry breaking and supersymmetry (SUSY) breaking are caused by the same sector. Besides, the SM-charged particles are also predicted by the symmetry breaking sector, and they give the soft SUSY breaking terms through the so-called gauge mediation. We investigate the mass spectrums in an explicit model with SU(5) and additional gauge groups, and discuss its phenomenological aspects. Especially, nonzero A-term and B-term are generated at one-loop level according to the mediation via the vector superfields, so that the electro-weak symmetry breaking and 125 GeV Higgs mass may be achieved by the large B-term and A-term even if the stop mass is around 1 TeV.

Fast-response LCDs for virtual reality applications

Science.gov (United States)

Chen, Haiwei; Peng, Fenglin; Gou, Fangwang; Wand, Michael; Wu, Shin-Tson

2017-02-01

We demonstrate a fast-response liquid crystal display (LCD) with an ultra-low-viscosity nematic LC mixture. The measured average motion picture response time is only 6.88 ms, which is comparable to 6.66 ms for an OLED at a 120 Hz frame rate. If we slightly increase the TFT frame rate and/or reduce the backlight duty ratio, image blurs can be further suppressed to unnoticeable level. Potential applications of such an image-blur-free LCD for virtual reality, gaming monitors, and TVs are foreseeable.

Fast SPT-Term Allocation and Efficient FPGA Implementation of FIR Filters for Software Defined Radio Applications

OpenAIRE

Bae, Choonghoon; Moteki, Takayuki; Kim, Minseok; Ichige, Koichi; Arai, Hiroyuki

2009-01-01

This paper presents a fast SPT-term allocation scheme and an efficient FPGA implementation of FIR filters for Software Defined Radio (SDR) applications. Direct conversion method based on RF direct sampling is nowadays widely used in SDR applications. Fast and accurate digital filters are required for RF direct sampling and processing in direct conversion, however such filters often require large digital circuit area. Signed-Power-of-Two (SPT) terms will be suitable for fast processing and eff...

Coincidence cross sections within the quasi free break-up model for elastic projectile break-up

International Nuclear Information System (INIS)

Corcalciuc, V.; Jelitto, H.

1991-11-01

Scrutinizing the basic break-up model of Serber we show that it is possible to derive the triple differential cross sections for particle-particle coincidences in analytical form. An alternative interpretation within the opaque version of the model suggests to assign these cross sections to the elastic nonresonant projectile break-up due to the nuclear interaction. Distortion effects by the Coulomb field of the target are included in analogy to the Serber model. Beside the well known single maximum in the break-up spectra double and triple peak structures appear for certain combinations of the observation angles. The model yields reasonable agreement to the given experimental data, concerning the multiple peak structure as well as the order of magnitude for the absolute normalisation. Its application comprises the region of forward emission angles, especially the angular range of the classical Coulomb deflection. (orig.) [de

Artificial intelligence applications of fast optical memory access

Science.gov (United States)

Henshaw, P. D.; Todtenkopf, A. B.

The operating principles and performance of rapid laser beam-steering (LBS) techniques are reviewed and illustrated with diagrams; their applicability to fast optical-memory (disk) access is evaluated; and the implications of fast access for the design of expert systems are discussed. LBS methods examined include analog deflection (source motion, wavefront tilt, and phased arrays), digital deflection (polarization modulation, reflectivity modulation, interferometric switching, and waveguide deflection), and photorefractive LBS. The disk-access problem is considered, and typical LBS requirements are listed as 38,000 beam positions, rotational latency 25 ms, one-sector rotation time 1.5 ms, and intersector space 87 microsec. The value of rapid access for increasing the power of expert systems (by permitting better organization of blocks of information) is illustrated by summarizing the learning process of the MVP-FORTH system (Park, 1983).

Regulatory aspects of the Leak Before Break application

International Nuclear Information System (INIS)

Korosec, D.; Vojvodic Tuma, J.

2000-01-01

In the present paper the Leak Before Break (LBB) methodology is described on the way, as it was evaluated in Slovenian Nuclear Safety Administration in the process of the nuclear power plant (NPP) Krsko modernization process. In the recent decade, reviewed regulatory position regarding elimination the dynamic effects of the postulated primary coolant pipe ruptures in some countries was issued. The basis for such new approach are research achievements on different areas of science like metallurgy, fracture mechanics, dynamic analysis and testing of materials. By this new regulatory position the utility has the possibility to adopt LBB concept, but has to fulfill at least general prerequisites, described in standard review plan, where the basic principles and objectives of the evaluation process are described. World wide practice shows that more intensive and detailed evaluation is necessary as it is described in the standard review plan. The concerns and requests raising during evaluation of the consequences of the adopted LBB concept have generally some common points comparing regulatory experience of different countries which have already accepted this methodology or are currently under the process of evaluation. But nevertheless every nuclear power plant is unique, comparing specific material properties, dynamic analysis assumptions, safety analyses performed etc. One of the most important areas in the LBB evaluation process is reliable primary piping material evaluation. Several generic material studies were performed and the applicability of these studies for the justification of LBB has to be carefully performed. Elimination of the double ended guillotine break from the safety analysis has very strong impact to the safety analysis results and finally to the structures, systems and components too. Nuclear safety administration has made a lot of effort to make its position on this methodology clear. The expertise of the authorized institutions is in such process

A break-even analysis of a community rehabilitation falls prevention service.

Science.gov (United States)

Comans, Tracy; Brauer, Sandy; Haines, Terry

2009-06-01

To identify and compare the minimum number of clients that a multidisciplinary falls prevention service delivered through domiciliary or centre-based care needs to treat to allow the service to reach a 'break-even' point. A break-even analysis was undertaken for each of two models of care for a multidisciplinary community rehabilitation falls prevention service. The two models comprised either a centre-based group exercise and education program or a similar program delivered individually in the client's home. The service consisted of a physiotherapist, occupational therapist and therapy assistant. The participants were adults aged over 65 years who had experienced previous falls. Costs were based on the actual cost of running a community rehabilitation team located in Brisbane. Benefits were obtained by estimating the savings gained to society from the number of falls prevented by the program on the basis of the falls reduction rates obtained in similar multidisciplinary programs. It is estimated that a multi-disciplinary community falls prevention team would need to see 57 clients per year to make the service break-even using a centre-based model of care and 78 clients for a domiciliary-based model. The service this study was based on has the capability to see around 300 clients per year in a centre-based service or 200-250 clients per year in a home-based service. Based on the best available estimates of costs of falls, multidisciplinary falls prevention teams in the community targeting people at high risk of falls are worthwhile funding from a societal viewpoint.

Delivering Bad News: Attitudes, Feelings, and Practice Characteristics Among Speech-Language Pathologists.

Science.gov (United States)

Gold, Rinat; Gold, Azgad

2018-02-06

The purpose of this study was to examine the attitudes, feelings, and practice characteristics of speech-language pathologists (SLPs) in Israel regarding the subject of delivering bad news. One hundred and seventy-three Israeli SLPs answered an online survey. Respondents represented SLPs in Israel in all stages of vocational experience, with varying academic degrees, from a variety of employment settings. The survey addressed emotions involved in the process of delivering bad news, training on this subject, and background information of the respondents. Frequency distributions of the responses of the participants were determined, and Pearson correlations were computed to determine the relation between years of occupational experience and the following variables: frequency of delivering bad news, opinions regarding training, and emotions experienced during the process of bad news delivery. Our survey showed that bad news delivery is a task that most participants are confronted with from the very beginning of their careers. Participants regarded training in the subject of delivering bad news as important but, at the same time, reported receiving relatively little training on this subject. In addition, our survey showed that negative emotions are involved in the process of delivering bad news. Training SLPs on specific techniques is required for successfully delivering bad news. The emotional burden associated with breaking bad news in the field of speech-language pathology should be noticed and addressed.

Fast plasma sintering delivers functional graded materials components with macroporous structures and osseointegration properties.

Science.gov (United States)

Godoy, R F; Coathup, M J; Blunn, G W; Alves, A L; Robotti, P; Goodship, A E

2016-04-13

We explored the osseointegration potential of two macroporous titanium surfaces obtained using fast plasma sintering (FPS): Ti macroporous structures with 400-600 µmØ pores (TiMac400) and 850-1000 µmØ pores (TiMac850). They were compared against two surfaces currently in clinical use: Ti-Growth® and air plasma spray (Ti-Y367). Each surface was tested, once placed over a Ti-alloy and once onto a CoCr bulk substrate. Implants were placed in medial femoral condyles in 24 sheep. Samples were explanted at four and eight weeks after surgery. Push-out loads were measured using a material-testing system. Bone contact and ingrowth were assessed by histomorphometry and SEM and EDX analyses. Histology showed early osseointegration for all the surfaces tested. At 8 weeks, TiMac400, TiMac850 and Ti-Growth® showed deep bone ingrowth and extended colonisation with newly formed bone. The mechanical push-out force was equal in all tested surfaces. Plasma spray surfaces showed greater bone-implant contact and higher level of pores colonisation with new bone than FPS produced surfaces. However, the void pore area in FPS specimens was significantly higher, yet the FPS porous surfaces allowed a deeper osseointegration of bone to implant. FPS manufactured specimens showed similar osseointegration potential to the plasma spray surfaces for orthopaedic implants. FPS is a useful technology for manufacturing macroporous titanium surfaces. Furthermore, its capability to combine two implantable materials, using bulk CoCr with macroporous titanium surfaces, could be of interest as it enables designers to conceive and manufacture innovative components. FPS delivers functional graded materials components with macroporous structures optimised for osseointegration.

Materials development for fast reactor applications

Energy Technology Data Exchange (ETDEWEB)

Jayakumar, T.; Mathew, M.D.; Laha, K.; Sandhya, R., E-mail: san@igcar.gov.in

2013-12-15

application are other developments being perused towards improving the economic competitiveness of fast reactor technology.

Fast ignition breakeven scaling

International Nuclear Information System (INIS)

Slutz, Stephen A.; Vesey, Roger Alan

2005-01-01

A series of numerical simulations have been performed to determine scaling laws for fast ignition break even of a hot spot formed by energetic particles created by a short pulse laser. Hot spot break even is defined to be when the fusion yield is equal to the total energy deposited in the hot spot through both the initial compression and the subsequent heating. In these simulations, only a small portion of a previously compressed mass of deuterium-tritium fuel is heated on a short time scale, i.e., the hot spot is tamped by the cold dense fuel which surrounds it. The hot spot tamping reduces the minimum energy required to obtain break even as compared to the situation where the entire fuel mass is heated, as was assumed in a previous study [S. A. Slutz, R. A. Vesey, I. Shoemaker, T. A. Mehlhorn, and K. Cochrane, Phys. Plasmas 7, 3483 (2004)]. The minimum energy required to obtain hot spot break even is given approximately by the scaling law E T = 7.5(ρ/100) -1.87 kJ for tamped hot spots, as compared to the previously reported scaling of E UT = 15.3(ρ/100) -1.5 kJ for untamped hotspots. The size of the compressed fuel mass and the focusability of the particles generated by the short pulse laser determines which scaling law to use for an experiment designed to achieve hot spot break even

Report of Break Out Group 1

DEFF Research Database (Denmark)

Alward, Randy; Carley, Kathleen M.; Madsen, Fredrik Huitfeldt

2006-01-01

, action" (OODA) loop. The break out group discussed vulnerability presentation needs common across various application domains, particularly in support of network discovery and network analysis tasks in those domains. Finally, the break out group wished to determine whether there is a means...... of characterizing a vulnerability. This would take into account the potential for the vulnerability to be exploited as well as the potential impact on the operations supported by the network, and on the network structure itself, of a successful exploit of that vulnerability.......To help understand a network and its ability to continue operating when under attack, the break out group discussed issues that need to be considered when presenting network vulnerability information to an analyst, manager or commander in effective support of that person's "observe, orient, decide...

Optimization of CR-39 for fast neutron dosimetry applications

International Nuclear Information System (INIS)

Vilela, E.; Fantuzzi, E.; Giacomelli, G.; Giorgini, M.; Morelli, B.; Patrizii, L.; Serra, P.; Togo, V.

1999-01-01

We present the results of an experimental work aimed at improving the performances of the CR-39[reg] (Registered Trademark of PPG Industries Inc.) nuclear track detector for neutron dosimetry applications. The work was done in collaboration with the Intercast Europe S.p.A., producer of CR-39 for commercial and scientific applications. We compare the CR-39 made with different additives concentrations and different polymerization processes. We evaluate the response of the CR-39 to fast neutrons from three sources: 241 Am-Be, 252 Cf and 238 Pu-Li. Particular attention was paid to background fluctuations that limit the lower detectable dose

Fast reactor sodium systems operation experience and 'leak-before-break' criterion

International Nuclear Information System (INIS)

Ivanenko, V.N.; Zybin, V.A.

1996-01-01

In the paper sodium leakage detection systems used at fast reactors are described. Requirements on their main characteristics (sensitivity, response lime) are formulated. Results of tests are presented on studying the parameters of sodium leak detection systems including experiments on the measurement of size distribution of aerosol particles that have passed through sodium systems thermal insulation after leak initiation. Comparison of these data with dispersion of particles formed at free burning is carried out. Experience of real leaks that occurred at fast reactor sodium systems is analyzed. It has been shown that initiation and development of real leaks do not always follow the theoretical scheme. A substantial role of human factor for sodium systems reliability relative to sodium leaks is stressed. (author)

Fast Filtration of Bacterial or Mammalian Suspension Cell Cultures for Optimal Metabolomics Results.

Directory of Open Access Journals (Sweden)

Natalie Bordag

Full Text Available The metabolome offers real time detection of the adaptive, multi-parametric response of the organisms to environmental changes, pathophysiological stimuli or genetic modifications and thus rationalizes the optimization of cell cultures in bioprocessing. In bioprocessing the measurement of physiological intracellular metabolite levels is imperative for successful applications. However, a sampling method applicable to all cell types with little to no validation effort which simultaneously offers high recovery rates, high metabolite coverage and sufficient removal of extracellular contaminations is still missing. Here, quenching, centrifugation and fast filtration were compared and fast filtration in combination with a stabilizing washing solution was identified as the most promising sampling method. Different influencing factors such as filter type, vacuum pressure, washing solutions were comprehensively tested. The improved fast filtration method (MxP® FastQuench followed by routine lipid/polar extraction delivers a broad metabolite coverage and recovery reflecting well physiological intracellular metabolite levels for different cell types, such as bacteria (Escherichia coli as well as mammalian cells chinese hamster ovary (CHO and mouse myeloma cells (NS0.The proposed MxP® FastQuench allows sampling, i.e. separation of cells from medium with washing and quenching, in less than 30 seconds and is robustly designed to be applicable to all cell types. The washing solution contains the carbon source respectively the 13C-labeled carbon source to avoid nutritional stress during sampling. This method is also compatible with automation which would further reduce sampling times and the variability of metabolite profiling data.

Patients' Perspectives on and Experiences of Home Exercise Programmes Delivered with a Mobile Application.

Science.gov (United States)

Abramsky, Hillary; Kaur, Puneet; Robitaille, Mikale; Taggio, Leanna; Kosemetzky, Paul K; Foster, Hillary; Gibson Bmr Pt MSc PhD, Barbara E; Bergeron, Maggie; Jachyra, Patrick

2018-01-01

Purpose: We explored patients' perspectives on home exercise programmes (HEPs) and their experiences using a mobile application designed to facilitate home exercise. Method: Data were generated using qualitative, semi-structured, face-to-face interviews with 10 participants who were receiving outpatient physiotherapy. Results: Establishing a therapeutic partnership between physiotherapists and patients enabled therapists to customize the HEPs to the patients' lifestyles and preferences. Analysis suggests that using the mobile application improved participants' ability to integrate the HEP into their daily life and was overwhelmingly preferred to traditional paper handouts. Conclusions: The results suggest that efforts to engage patients in HEPs need to take their daily lives into account. To move in this direction, sample exercise prescription questions are offered. Mobile applications do not replace the clinical encounter, but they can be an effective tool and an extension of delivering personalized HEPs in an existing therapeutic partnership.

Rejoining of DNA double-strand breaks in human fibroblasts and its impairment in one ataxia telangiectasia and two Fanconi strains

International Nuclear Information System (INIS)

Coquerelle, T.M.; Weibezahn, K.F.

1981-01-01

Using the technique of neutral elution through polycarbonate filters as a measure of DNA length, and hence of the number of double-strand breaks incurred as a result of radiation damage, we found that normal human fibroblasts rejoin 50% of all breaks within only 3 min (37 degrees C). This fast rejoining was impaired in fibroblasts from one patient with Ataxia telangiectasia and in fibroblasts from two patients with Fanconi's anemia. Also the number of residual breaks after several hours of repair was higher than in control cells. Other cases with the same diseases were normal in their rejoining of double-strand breaks

Application of a planetary wave breaking parameterization to stratospheric circulation statistics

Science.gov (United States)

Randel, William J.; Garcia, Rolando R.

1994-01-01

The planetary wave parameterization scheme developed recently by Garcia is applied to statospheric circulation statistics derived from 12 years of National Meteorological Center operational stratospheric analyses. From the data a planetary wave breaking criterion (based on the ratio of the eddy to zonal mean meridional potential vorticity (PV) gradients), a wave damping rate, and a meridional diffusion coefficient are calculated. The equatorward flank of the polar night jet during winter is identified as a wave breaking region from the observed PV gradients; the region moves poleward with season, covering all high latitudes in spring. Derived damping rates maximize in the subtropical upper stratosphere (the 'surf zone'), with damping time scales of 3-4 days. Maximum diffusion coefficients follow the spatial patterns of the wave breaking criterion, with magnitudes comparable to prior published estimates. Overall, the observed results agree well with the parameterized calculations of Garcia.

Tinnitus therapy using tailor-made notched music delivered via a smartphone application and Ginko combined treatment: A pilot study.

Science.gov (United States)

Kim, So Young; Chang, Mun Young; Hong, Min; Yoo, Sun-Gil; Oh, Dongik; Park, Moo Kyun

2017-10-01

Notched music therapy has been suggested to be effective for relieving tinnitus. We have developed a smartphone application using tailor-made notched music for tinnitus patients. This study aimed to evaluate the effect of this smartphone application on reducing tinnitus. In addition, we investigated the predictive factors for tinnitus treatment outcome using this smartphone application. A total of 26 patients who were chronically distressed by tinnitus with a ≥18 Tinnitus Handicap Inventory (THI) score were recruited from March 2013 to March 2015 (National Clinical Trial (NCT) Identifier Number 01663467). Patients were instructed to listen to tailor-made notched music through our smartphone application for 30-60min per day and were prescribed Ginkgo biloba for 3 months. Treatment outcome was evaluated using the THI, a visual analogue scale that measures the effects of tinnitus in terms of loudness, noticeable time, annoyance, and disruption of daily life. Demographic data, including age, sex, duration of tinnitus, and pre-treatment scores on questionnaires such as the Beck Depression Inventory (BDI), State Trait Anxiety Inventory (TAI), and Pittsburgh Sleep Quality Index (PSQI) scores were compared between the effective and non-effective groups according to the differences between their pre- and post-treatment THI scores. Smartphone application-delivered notched music therapy and Ginko combined treatment improved the THI score from 33.9±18.9 to 23.1±15.2; the effect was particularly marked for the emotional score of the THI. Improvement in the THI score was positively correlated with the initial THI score (P=0.001, adjusted estimated value=0.49, 95% confidence interval=0.25-0.73). Chronic tinnitus patients who underwent smartphone application-delivered notched music therapy and Ginko combined treatment showed improved THI scores, particularly the emotional score of the THI. A smartphone application-delivered therapy and Ginko combined treatment may be more

Benchmark tests for fast and thermal reactor applications

International Nuclear Information System (INIS)

Seki, Yuji

1984-01-01

Integral tests of JENDL-2 library for fast and thermal reactor applications are reviewed including relevant analyses of JUPITER experiments. Criticality and core center characteristics were tested with one-dimensional models for a total of 27 fast critical assemblies. More sofisticated problems such as reaction rate distributions, control rod worths and sodium void reactivities were tested using two-dimensional models for MOZART and ZPPR-3 assemblies. Main observations from the fast core benchmark tests are as follows. 1) The criticality is well predicted; the average C/E value is 0.999+-0.008 for uranium cores and 0.997+-0.005 for plutonium cores. 2) The calculation underpredicts the reaction rate ratio 239 Pusub(fis)/ 235 Usub(fis) by 3% and overpredicts 238 Usub(cap)/ 239 Pusub(fis) by 6%. The results are consistent with those of JUPITER analyses. 3) The reaction rate distributions in the cores of prototype size are well predicted within +-3%. In larger JUPITER cores, however, the C/E value increases with the radial distance from the core center up to 6% at the outer core edge. 4) The prediction of control rod worths is satisfactory; C/E values are within the range from 0.92 to 0.97 with no apparent dependence on 10 B enrichment and the number of control rods inserted. Spatial dependence of C/E is also observed in the JUPITER cores. 5) The sodium void reactivity is overpredicted by 30% to 50% to the positive side. 1) The criticality is well predicted, as is the same in the fast core tests; the average C/E is 0.997+-0.003. 2) The calculation overpredicts 238 Usub(fis)/ 235 Usub(fis) by 3% to 6%, which shows the same tendency as in the small and medium size fast assemblies. The 238 Usub(cap)/ 235 Usub(fis) ratio is well predicted in the thermal cores. The calculated reaction rate ratios of 232 Th deviate from the measurements by 10% to 15%. (author)

Practical Management of Diabetes during Ramadan Fast

Directory of Open Access Journals (Sweden)

Sherif IH

2007-01-01

Full Text Available Fasting in Ramadan is obligatory for all healthy Muslim adults. No food or drink may be consumed between dawn and sunset [1]. Strictly speaking, the fast of Ramadan is a period of “intermittent fasting” or daily cycles of “alternating” fasting and feeding periods. The periods of the fasting and feeding vary by the geographical locations and by time of the year. During the month of Ramadan, there are two main meals in most Moslem communities. These are commonly referred to by their Arabic origin, namely the “Iftar” (i.e. break of fast immediately after sunset and “Sohur or Suhoor” (i.e. pre-dawn meal. As the Islamic calendar year is lunar, Ramadan (the ninth month therefore starts approximately 10 days earlier each year on the Gregorian calendar. This year, 2007, Ramadan is likely to start between 12th and 14th September.

Quantitation of the repair of gamma-radiation-induced double-strand DNA breaks in human fibroblasts

International Nuclear Information System (INIS)

Woods, W.G.

1981-01-01

The quantitation and repair of double-strand DNA breaks in human fibroblasts has been determined using a method involving the nondenaturing elution of DNA from a filter. DNA from cells from two human fibroblast lines exposed to γ-radiation from 0 to 10000 rad showed increasing retention on a filter with decreasing radiation dose, and the data suggest a linear relationship between double-strand breaks induced and radiation dose. The ability of normal human fibroblasts to repair double-strand breaks with various doses of radiation was demonstrated, with a tsub(1/2) of 10 min for repair of 5000 rad exposure and 39 min for repair of 10000 rad damage. The kinetics of the DNA rejoining were not linear and suggest that, as in the repair of single-strand breaks, both an initial fast and a later slow mechanism may be involved. (Auth.)

Fasting: Molecular Mechanisms and Clinical Applications

Science.gov (United States)

Longo, Valter D.; Mattson, Mark P.

2014-01-01

Fasting has been practiced for millennia, but only recently studies have shed light on its role in adaptive cellular responses that reduce oxidative damage and inflammation, optimize energy metabolism and bolster cellular protection. In lower eukaryotes, chronic fasting extends longevity in part by reprogramming metabolic and stress resistance pathways. In rodents intermittent or periodic fasting protects against diabetes, cancers, heart disease and neurodegeneration, while in humans it helps reduce obesity, hypertension, asthma and rheumatoid arthritis. Thus, fasting has the potential to delay aging and help prevent and treat diseases while minimizing the side effects caused by chronic dietary interventions. PMID:24440038

Small break loss of coolant accidents: Bottom and side break

International Nuclear Information System (INIS)

Hardy, P.G.; Richter, H.J.

1987-01-01

A LOCA can be caused, e.g. by a small break in the primary cooling system. The rate of fluid escaping through such a break will define the time until the core will be uncovered. Therefore the prediction of fluid loss and pressure transient is of major importance to plan for timely action in response to such an event. Stratification of the two phases might be present upstream of the break, thus, the location of the break relative to the vapor-liquid interface and the overall upstream fluid conditions are relevant for the calculation of fluid loss. Experimental results and analyses are presented here for small breaks at the bottom or at the side of a small pressure vessel. It was found that in such a case the onset of the so-called ''vapor pull through'' is important but swelling at sufficient depressurization rates of the liquid due to flashing is also of significance. It was also discovered that in the bottom break the flow rate is strongly dependent on the break entrance quality of the vapour-liquid mixture. The side break can be treated similarly to the bottom break if the interface level is above the break. The analyses developed on the basis of experimental observations showed reasonable agreement of predicted and measured pressure transients. It was possible to calculate the changing interface level and mixture void fraction history in a way compatible with the behavior observed during the experiments. Even though the experiments were performed at low pressures, this work should help to get a better understanding of physical phenomena occurring in a full scale small break LOCA. (orig./HP)

Fasting: molecular mechanisms and clinical applications.

Science.gov (United States)

Longo, Valter D; Mattson, Mark P

2014-02-04

Fasting has been practiced for millennia, but, only recently, studies have shed light on its role in adaptive cellular responses that reduce oxidative damage and inflammation, optimize energy metabolism, and bolster cellular protection. In lower eukaryotes, chronic fasting extends longevity, in part, by reprogramming metabolic and stress resistance pathways. In rodents intermittent or periodic fasting protects against diabetes, cancers, heart disease, and neurodegeneration, while in humans it helps reduce obesity, hypertension, asthma, and rheumatoid arthritis. Thus, fasting has the potential to delay aging and help prevent and treat diseases while minimizing the side effects caused by chronic dietary interventions. Copyright © 2014 Elsevier Inc. All rights reserved.

Fast reactors bulk sodium coolant disposal NOAH process application

International Nuclear Information System (INIS)

Magny, E. de; Berte, M.

1997-01-01

Within the frame of the fast reactors decommissioning, the becoming of contaminated sodium coolant from primary, secondary and auxiliary circuits is an important aspect. The 'NOAH' sodium disposal process, developed by the French Atomic Energy Commission (CEA), is presented as the only process, for destroying large quantities of contaminated sodium, that has attained industrial status. The principles and technical options of the process are described and main advantages such as safety , operating simplicity and compactness of the plant are put forward. The process has been industrially validated in 1993/1994 by successfully reacting the 37 metric tons of primary contaminated sodium from the French Rapsodie experimental reactor. The main outstanding aspects and experience gained from this so called 'DESORA' operation (DEstruction of SOdium from RApsodie) are recalled. Another industrial application concerns the current project for destroying more than 1500 metric tons of contaminated sodium from the British PFR (Prototype Fast Reactor) in Scotland. Although the design is in the continuity of DESORA, it has taken into account the specific requirements of PFR application and the experience feed back from Rapsodie. The main technical options and performances of the PFR sodium reaction unit are presented while mentioning the design evolution. (author)

The use of LBB concept in French fast reactors: Application to SPX plant

International Nuclear Information System (INIS)

Turbat, A.; Deschanels, H.; Sperandio, M.

1997-01-01

The leak before break (LBB) concept was not used at the design level for SUPERPHENIX (SPX), but different studies have been performed or are in progress concerning different components : Main Vessel (MV), pipings. These studies were undertaken to improve the defense in depth, an approach used in all French reactors. In a first study, the LBB approach has been applied to the MV of SPX plant to verify the absence of risk as regards the core supporting function and to help in the definition of in-service inspection (ISI) program. Defining a reference semi-elliptic defect located in the welds of the structure, it is verified that the crack growth is limited and that the end-of-life defect is smaller than the critical one. Then it is shown that the hoop welds (those which are the most important for safety) located between the roof and the triple point verify the leak-before-break criteria. However, generally speaking, the low level of membrane primary stresses which is favorable for the integrity of the vessel makes the application of the leak-before-break concept more difficult due to small crack opening areas. Finally, the extension of the methodology to the secondary pipings of SPX incorporating recent European works of DCRC is briefly presented

The use of LBB concept in French fast reactors: Application to SPX plant

Energy Technology Data Exchange (ETDEWEB)

Turbat, A.; Deschanels, H.; Sperandio, M. [and others

1997-04-01

The leak before break (LBB) concept was not used at the design level for SUPERPHENIX (SPX), but different studies have been performed or are in progress concerning different components : Main Vessel (MV), pipings. These studies were undertaken to improve the defense in depth, an approach used in all French reactors. In a first study, the LBB approach has been applied to the MV of SPX plant to verify the absence of risk as regards the core supporting function and to help in the definition of in-service inspection (ISI) program. Defining a reference semi-elliptic defect located in the welds of the structure, it is verified that the crack growth is limited and that the end-of-life defect is smaller than the critical one. Then it is shown that the hoop welds (those which are the most important for safety) located between the roof and the triple point verify the leak-before-break criteria. However, generally speaking, the low level of membrane primary stresses which is favorable for the integrity of the vessel makes the application of the leak-before-break concept more difficult due to small crack opening areas. Finally, the extension of the methodology to the secondary pipings of SPX incorporating recent European works of DCRC is briefly presented.

Give me a better break: Choosing workday break activities to maximize resource recovery.

Science.gov (United States)

Hunter, Emily M; Wu, Cindy

2016-02-01

Surprisingly little research investigates employee breaks at work, and even less research provides prescriptive suggestions for better workday breaks in terms of when, where, and how break activities are most beneficial. Based on the effort-recovery model and using experience sampling methodology, we examined the characteristics of employee workday breaks with 95 employees across 5 workdays. In addition, we examined resources as a mediator between break characteristics and well-being. Multilevel analysis results indicated that activities that were preferred and earlier in the work shift related to more resource recovery following the break. We also found that resources mediated the influence of preferred break activities and time of break on health symptoms and that resource recovery benefited person-level outcomes of emotional exhaustion, job satisfaction, and organizational citizenship behavior. Finally, break length interacted with the number of breaks per day such that longer breaks and frequent short breaks were associated with more resources than infrequent short breaks. (c) 2016 APA, all rights reserved).

Fast ultrasonic visualisation under sodium. Application to the fast neutron reactors

International Nuclear Information System (INIS)

Imbert, Ch.

1997-01-01

The fast ultrasonic visualization under sodium is in the programme of research and development on the inspection inside the fast neutron reactors. This work is about the development of a such system of fast ultrasonic imaging under sodium, in order to improve the existing visualization systems. This system is based on the principle of orthogonal imaging, it uses two linear antennas with an important dephasing having 128 piezo-composite elements of central frequency equal to 1.6 MHz. (N.C.)

Fasting: Molecular Mechanisms and Clinical Applications

OpenAIRE

Longo, Valter D.; Mattson, Mark P.

2014-01-01

Fasting has been practiced for millennia, but only recently studies have shed light on its role in adaptive cellular responses that reduce oxidative damage and inflammation, optimize energy metabolism and bolster cellular protection. In lower eukaryotes, chronic fasting extends longevity in part by reprogramming metabolic and stress resistance pathways. In rodents intermittent or periodic fasting protects against diabetes, cancers, heart disease and neurodegeneration, while in humans it helps...

Study on severe accident induced by large break loss of coolant accident for pressureized water reactor

International Nuclear Information System (INIS)

Zhang Longfei; Zhang Dafa; Wang Shaoming

2007-01-01

Using the best estimate computer code SCDAP/RELAP5/MOD3.2 and taking US Westinghouse corporation Surry nuclear power plant as the reference object, a typical three-loop pressurized water reactor severe accident calculation model was established and 25 cm large break loss of coolant accident (LBLOCA) in cold and hot leg of primary loop induced core melt accident was analyzed. The calculated results show that core melt progression is fast and most of the core material melt and relocated to the lower plenum. The lower head of reactor pressure vessel failed at an early time and the cold leg break is more severe than the hot leg break in primary loop during LBLOCA. (authors)

Optimization of CR-39 for fast neutron dosimetry applications

CERN Document Server

Vilela, E; Giacomelli, G; Giorgini, M; Morelli, B; Patrizii, L; Serra, P; Togo, V

1999-01-01

We present the results of an experimental work aimed at improving the performances of the CR-39[reg] (Registered Trademark of PPG Industries Inc.) nuclear track detector for neutron dosimetry applications. The work was done in collaboration with the Intercast Europe S.p.A., producer of CR-39 for commercial and scientific applications. We compare the CR-39 made with different additives concentrations and different polymerization processes. We evaluate the response of the CR-39 to fast neutrons from three sources: sup 2 sup 4 sup 1 Am-Be, sup 2 sup 5 sup 2 Cf and sup 2 sup 3 sup 8 Pu-Li. Particular attention was paid to background fluctuations that limit the lower detectable dose.

Breaking Bat

Science.gov (United States)

Aguilar, Isaac-Cesar; Kagan, David

2013-01-01

The sight of a broken bat in Major League Baseball can produce anything from a humorous dribbler in the infield to a frightening pointed projectile headed for the stands. Bats usually break at the weakest point, typically in the handle. Breaking happens because the wood gets bent beyond the breaking point due to the wave sent down the bat created…

Effects of dormancy-breaking chemicals on ABA levels in barley grain embryos

NARCIS (Netherlands)

Wang, M.; Meulen, R.M. van der; Visser, K.; Schalk, H.P. van; Duijn, B. van; Boer, A.H. de

1998-01-01

The endogenous ABA contents of dormant and nondormant barley grains were determined following application of different compounds to break dormancy. The chemicals used for breaking of dormancy in intact dormant grains were weak and strong acids, alcohols,. hydrogen peroxide, cyanide, nitrate,

Effective delivery of sonication energy to fast settling and agglomerating nanomaterial suspensions for cellular studies: Implications for stability, particle kinetics, dosimetry and toxicity.

Science.gov (United States)

Cohen, Joel M; Beltran-Huarac, Juan; Pyrgiotakis, Georgios; Demokritou, Philip

2018-04-01

Typical in vitro assays used for high throughput toxicological screening and measuring nano-bio interactions are conducted by pipetting suspensions of engineered nanomaterials (ENMs) dispersed in nutrient-rich culture media directly onto cells. In order to achieve fairly monodisperse and stable suspensions of small agglomerates, ultrasonic energy is usually applied to break apart large agglomerates that can form upon suspension in liquid. Lack of standardized protocols and methods for delivering sonication energy can introduce variability in the ENM suspension properties ( e.g . agglomerate size, polydispersity, suspension stability over time), and holds significant implications for in vitro dosimetry, toxicity, and other nano-bio interactions. Careful assessment of particle transformations during dispersion preparation and sonication is therefore critical for accurate interpretation of in vitro toxicity studies. In this short communication, the difficulties of preparing stable suspensions of rapidly settling ENMs are presented. Furthermore, methods to optimize the delivery of the critical sonication energy required to break large agglomerates and prepare stable, fairly monodispersed suspensions of fast settling ENMs are presented. A methodology for the efficient delivery of sonication energy in a discrete manner is presented and validated using various rapidly agglomerating and settling ENMs. The implications of continuous vs. discrete sonication on average hydrodynamic diameter, and polydispersity was also assessed for both fast and slow settling ENMs. For the rapidly agglomerating and settling ENMs (Ag15%/SiO 2 , Ag and CeO 2 ), the proposed discrete sonication achieved a significant reduction in the agglomerate diameter and polydispersity. In contrast, the relatively slow agglomerating and settling Fe 2 O 3 suspension did not exhibit statistically significant differences in average hydrodynamic diameter or polydispersity between the continuous and discrete

Determinants of fast-food consumption. An application of the Theory of Planned Behaviour.

Science.gov (United States)

Dunn, Kirsten I; Mohr, Philip; Wilson, Carlene J; Wittert, Gary A

2011-10-01

This study applied and extended the Theory of Planned Behaviour (TPB; Ajzen, 1988) in an examination of the variables influencing fast-food consumption in an Australian sample. Four hundred and four participants responded to items measuring TPB constructs and retrospective and prospective measures of fast-food consumption. Additional independent variables included: Consideration of Future Consequences (Strathman, Gleicher, Boninger, & Edwards, 1994), Fear of Negative Evaluation (Leary, 1983), and Self-Identification as a Healthy Eater Scale (Armitage & Conner, 1999a). Structural Equation Modeling (SEM) was used to examine predictors of consumption. SEM indicated that the TPB successfully predicted fast-food consumption. Factor analyses assisted in the definition of constructs that underlay attitudes towards fast foods. These constructs were included in an 'extended' TPB model which then provided a richer source of information regarding the nature of the variables influencing fast-food consumption. Findings suggest that fast-food consumption is influenced by specific referent groups as well as a general demand for meals that are tasty, satisfying, and convenient. These factors reflect immediate needs and appear to override concerns about longer-term health risks associated with fast food. Results are discussed in the context of possible applications. Copyright © 2011 Elsevier Ltd. All rights reserved.

SU-E-T-29: A Web Application for GPU-Based Monte Carlo IMRT/VMAT QA with Delivered Dose Verification

International Nuclear Information System (INIS)

Folkerts, M; Graves, Y; Tian, Z; Gu, X; Jia, X; Jiang, S

2014-01-01

Purpose: To enable an existing web application for GPU-based Monte Carlo (MC) 3D dosimetry quality assurance (QA) to compute “delivered dose” from linac logfile data. Methods: We added significant features to an IMRT/VMAT QA web application which is based on existing technologies (HTML5, Python, and Django). This tool interfaces with python, c-code libraries, and command line-based GPU applications to perform a MC-based IMRT/VMAT QA. The web app automates many complicated aspects of interfacing clinical DICOM and logfile data with cutting-edge GPU software to run a MC dose calculation. The resultant web app is powerful, easy to use, and is able to re-compute both plan dose (from DICOM data) and delivered dose (from logfile data). Both dynalog and trajectorylog file formats are supported. Users upload zipped DICOM RP, CT, and RD data and set the expected statistic uncertainty for the MC dose calculation. A 3D gamma index map, 3D dose distribution, gamma histogram, dosimetric statistics, and DVH curves are displayed to the user. Additional the user may upload the delivery logfile data from the linac to compute a 'delivered dose' calculation and corresponding gamma tests. A comprehensive PDF QA report summarizing the results can also be downloaded. Results: We successfully improved a web app for a GPU-based QA tool that consists of logfile parcing, fluence map generation, CT image processing, GPU based MC dose calculation, gamma index calculation, and DVH calculation. The result is an IMRT and VMAT QA tool that conducts an independent dose calculation for a given treatment plan and delivery log file. The system takes both DICOM data and logfile data to compute plan dose and delivered dose respectively. Conclusion: We sucessfully improved a GPU-based MC QA tool to allow for logfile dose calculation. The high efficiency and accessibility will greatly facilitate IMRT and VMAT QA

SU-E-T-29: A Web Application for GPU-Based Monte Carlo IMRT/VMAT QA with Delivered Dose Verification

Energy Technology Data Exchange (ETDEWEB)

Folkerts, M [The University of Texas Southwestern Medical Ctr, Dallas, TX (United States); University of California, San Diego, La Jolla, CA (United States); Graves, Y [University of California, San Diego, La Jolla, CA (United States); Tian, Z; Gu, X; Jia, X; Jiang, S [The University of Texas Southwestern Medical Ctr, Dallas, TX (United States)

2014-06-01

Purpose: To enable an existing web application for GPU-based Monte Carlo (MC) 3D dosimetry quality assurance (QA) to compute “delivered dose” from linac logfile data. Methods: We added significant features to an IMRT/VMAT QA web application which is based on existing technologies (HTML5, Python, and Django). This tool interfaces with python, c-code libraries, and command line-based GPU applications to perform a MC-based IMRT/VMAT QA. The web app automates many complicated aspects of interfacing clinical DICOM and logfile data with cutting-edge GPU software to run a MC dose calculation. The resultant web app is powerful, easy to use, and is able to re-compute both plan dose (from DICOM data) and delivered dose (from logfile data). Both dynalog and trajectorylog file formats are supported. Users upload zipped DICOM RP, CT, and RD data and set the expected statistic uncertainty for the MC dose calculation. A 3D gamma index map, 3D dose distribution, gamma histogram, dosimetric statistics, and DVH curves are displayed to the user. Additional the user may upload the delivery logfile data from the linac to compute a 'delivered dose' calculation and corresponding gamma tests. A comprehensive PDF QA report summarizing the results can also be downloaded. Results: We successfully improved a web app for a GPU-based QA tool that consists of logfile parcing, fluence map generation, CT image processing, GPU based MC dose calculation, gamma index calculation, and DVH calculation. The result is an IMRT and VMAT QA tool that conducts an independent dose calculation for a given treatment plan and delivery log file. The system takes both DICOM data and logfile data to compute plan dose and delivered dose respectively. Conclusion: We sucessfully improved a GPU-based MC QA tool to allow for logfile dose calculation. The high efficiency and accessibility will greatly facilitate IMRT and VMAT QA.

Application of leak-before-break criteria to pressurized water reactors

International Nuclear Information System (INIS)

Roege, P.; Day, B.; Beckjord, E.; Golay, M.

1986-01-01

The possibility of consequential damage to safety-related systems or components after postulated pipe breaks in Light Water Reactors has led to the installation of pipe restraints capable of withstanding the loads in such an accident. These restraints are a significant part of initial capital cost, and because of their size and location, impede plant maintenance. The Piping Review Committee of the U.S. Nuclear Regulatory Commission has concluded that, subject to fulfillment of certain criteria, the pipe restraints for pressurized water reactor main coolant piping are not necessary, because the failure mode of this piping is such that it will leak before it will break, and the leakage of reactor coolant is large enough to detect. In this study, we examine the piping systems of a 4-loop 1,150 MWe pressurized water reactor, determining the crack size that would be stable from a fracture mechanics point of view, and the range of leak rates that would ensue. We then consider the sensitivity of conventional leak detection systems, and find that pipe sizes down to 45 cm in diameter would meet the leak-before-break criteria. Improvements in the sensitivity of conventional leak detectors would extend this range down to pipe sizes down to the range of 20 - 45 cm in diameter. The development of local leak detection systems which would respond to leaks in compartments or confined areas would make it possible to apply the criteria to sizes as low as 10 - 20 cm in diameter, which appear to be the limit of the net cost savings of eliminating pipe restraints and adding additional leak detection instrumentation. Extending the leak-before-break concept into this smallest pipe range may require improved precision in crack definition, flow modeling, and leak detection. Better detection of leaks may also require use of new detection methods coupled to novel approaches to piping system design. (J.P.N.)

Indoor Fast Neutron Generator for Biophysical and Electronic Applications

Science.gov (United States)

Cannuli, A.; Caccamo, M. T.; Marchese, N.; Tomarchio, E. A.; Pace, C.; Magazù, S.

2018-05-01

This study focuses the attention on an indoor fast neutron generator for biophysical and electronic applications. More specifically, the findings obtained by several simulations with the MCNP Monte Carlo code, necessary for the realization of a shield for indoor measurements, are presented. Furthermore, an evaluation of the neutron spectrum modification caused by the shielding is reported. Fast neutron generators are a valid and interesting available source of neutrons, increasingly employed in a wide range of research fields, such as science and engineering. The employed portable pulsed neutron source is a MP320 Thermo Scientific neutron generator, able to generate 2.5 MeV neutrons with a neutron yield of 2.0 x 106 n/s, a pulse rate of 250 Hz to 20 KHz and a duty factor varying from 5% to 100%. The neutron generator, based on Deuterium-Deuterium nuclear fusion reactions, is employed in conjunction with a solid-state photon detector, made of n-type high-purity germanium (PINS-GMX by ORTEC) and it is mainly addressed to biophysical and electronic studies. The present study showed a proposal for the realization of a shield necessary for indoor applications for MP320 neutron generator, with a particular analysis of the transport of neutrons simulated with Monte Carlo code and described the two main lines of research in which the source will be used.

Analysis of criticality safety of coupled fast-thermal core 'HERBE'

International Nuclear Information System (INIS)

Pesic, M.

1991-01-01

Power excursion during possible fast core flooding is analyzed as serious accident. Model gives short filling time of fast zone with moderator after break of fast core tank. Reactivity increase is determined by computer codes and verified in specific experiments. Measurements of safety rods drop time and reactivity worth are performed. Coupled core kinetics parameters are determined according to model of Avery. Power excursion study, depending on power level threshold and safety instrumentation response time is performed. It was shown that safety system can shut-down reactor safely even in case of highly set power thresholds and partially failure of safety chain. (author)

Geometrical shock dynamics for magnetohydrodynamic fast shocks

KAUST Repository

Mostert, W.; Pullin, D. I.; Samtaney, Ravi; Wheatley, V.

2016-01-01

We describe a formulation of two-dimensional geometrical shock dynamics (GSD) suitable for ideal magnetohydrodynamic (MHD) fast shocks under magnetic fields of general strength and orientation. The resulting area–Mach-number–shock-angle relation is then incorporated into a numerical method using pseudospectral differentiation. The MHD-GSD model is verified by comparison with results from nonlinear finite-volume solution of the complete ideal MHD equations applied to a shock implosion flow in the presence of an oblique and spatially varying magnetic field ahead of the shock. Results from application of the MHD-GSD equations to the stability of fast MHD shocks in two dimensions are presented. It is shown that the time to formation of triple points for both perturbed MHD and gas-dynamic shocks increases as (Formula presented.), where (Formula presented.) is a measure of the initial Mach-number perturbation. Symmetry breaking in the MHD case is demonstrated. In cylindrical converging geometry, in the presence of an azimuthal field produced by a line current, the MHD shock behaves in the mean as in Pullin et al. (Phys. Fluids, vol. 26, 2014, 097103), but suffers a greater relative pressure fluctuation along the shock than the gas-dynamic shock. © 2016 Cambridge University Press

Geometrical shock dynamics for magnetohydrodynamic fast shocks

KAUST Repository

Mostert, W.

2016-12-12

We describe a formulation of two-dimensional geometrical shock dynamics (GSD) suitable for ideal magnetohydrodynamic (MHD) fast shocks under magnetic fields of general strength and orientation. The resulting area–Mach-number–shock-angle relation is then incorporated into a numerical method using pseudospectral differentiation. The MHD-GSD model is verified by comparison with results from nonlinear finite-volume solution of the complete ideal MHD equations applied to a shock implosion flow in the presence of an oblique and spatially varying magnetic field ahead of the shock. Results from application of the MHD-GSD equations to the stability of fast MHD shocks in two dimensions are presented. It is shown that the time to formation of triple points for both perturbed MHD and gas-dynamic shocks increases as (Formula presented.), where (Formula presented.) is a measure of the initial Mach-number perturbation. Symmetry breaking in the MHD case is demonstrated. In cylindrical converging geometry, in the presence of an azimuthal field produced by a line current, the MHD shock behaves in the mean as in Pullin et al. (Phys. Fluids, vol. 26, 2014, 097103), but suffers a greater relative pressure fluctuation along the shock than the gas-dynamic shock. © 2016 Cambridge University Press

Fast risetime BLT switches for accelerators applications

International Nuclear Information System (INIS)

Kirkman-Amemiya, G.; Reinhardt, N.; Choi, M.S.; Gundersen, M.A.

1991-01-01

Several particle accelerator systems require repetitive switches capable to switching peak currents of several kA with short risetimes, in particular kicker magnets used to transfer particle beams from one section of an accelerator to another require current pulses that rise from zero to 100% in a time determined by the separation between particle bunches which can be only 10's of nsec in some applications. One particular application is the injection and extraction kickers for the low energy booster (LEB) of the superconducting super collider (SSC) which requires < 50nsec 0-99% risetime. Another system with similarly strict risetime requirement is the kicker for the Stanford Linear Collider electron damping rings. In this work, a fast risetime BLT switch which has demonstrated 17kA at 30kV with < 60nsec risetime, 1.5kA at 20kV with < 18nsec risetime, and up to 240Hz operation at 20kV, 7kA is reported. A tetrode triggering method is described which reduces risetime by eliminating prepulse behavior

Breaking bad news in prenatal medicine: a literature review.

Science.gov (United States)

Luz, Rita; George, Astrid; Spitz, Elisabeth; Vieux, Rachel

2017-02-01

The diagnosis of a fetal anomaly in perinatal medicine forces expectant parents and healthcare providers to face the difficult process of breaking bad news. This exploratory literature review was aimed at providing a medical and psychological view of the psychological experience in expectant parents and physicians in the context of prenatal diagnosis of a fetal anomaly. An exploratory search of PubMed and PsycINFO/PsycARTICLES databases performed by an interdisciplinary team composed of a physician and psychologists. Search terms were: prenatal diagnosis AND bad news; prenatal diagnosis AND psychological consequences; prenatal diagnosis AND psychological sequelae; prenatal diagnosis AND fetal abnormality. The processing of selected articles followed a standardised five-step procedure. A total of 860 articles were screened of which 32 were retained for analysis. Four main themes emerged from the explanatory content analysis: (1) parents' subjective experience; (2) physicians' subjective experience; (3) encounters between expectant parents and professionals; and (4) ethical challenges in breaking bad news in prenatal medicine. Expectant parents go through a complex and multidimensional experience when the diagnosis of a fetal anomaly is disclosed. Simultaneously, physicians consider breaking bad news as a very stressful event and are poorly prepared in this regard. A better knowledge of factors underlying psychological adjustment of the parental dyad and on the subjective experience of physicians delivering these diagnoses could enable better adaptation for both patients and professionals.

Coupling-constant flows and dynamical symmetry breaking

International Nuclear Information System (INIS)

Yamagishi, H.

1981-01-01

The Coleman-Weinberg theory is reformulated in terms of flows in coupling-constant space. It is shown that the existence of dynamical symmetry breaking is governed essentially by the b functions. An application is made to the massless Weinberg-Salam model

E-mail, decisional styles, and rest breaks.

Science.gov (United States)

Baker, James R; Phillips, James G

2007-10-01

E-mail is a common but problematic work application. A scale was created to measure tendencies to use e-mail to take breaks (e-breaking); and self-esteem and decisional style (vigilance, procrastination, buck-passing, hypervigilance) were used to predict the self-reported and actual e-mail behaviors of 133 participants (students and marketing employees). Individuals who were low in defensive avoidance (buck-passing) engaged in more e-mailing per week, both in time spent on e-mail and message volume. E-breakers were more likely to engage in behavioral procrastination and spent more time on personal e-mail.

Physics and applications of micro and fast z-pinch plasmas

International Nuclear Information System (INIS)

Masugata, Katsumi

2003-07-01

This is the proceedings of symposium on 'Physics and Application of Micro and Fast z-Pinch Plasma' held at National Institute for Fusion Science. Recent progress of experimental and theoretical works on high energy density plasmas produced by pulsed power is presented. Separate abstracts were presented for 4 of the papers in this report. The remaining 14 were considered outside the subject scope of INIS. (J.P.N.)

The application of leak before break concept to W7-X target module

Energy Technology Data Exchange (ETDEWEB)

Dundulis, G., E-mail: gintas@mail.lei.lt; Janulionis, R.; Karalevičius, R.

2013-11-15

Highlights: • LBB application to Wendelstein 7-X fusion reactor. • R6 method application to crack analysis. • Through wall crack opening analysis. • Determination of leak rate function. • Crack growth analysis. -- Abstract: Fusion is the energy production technology, which could potentially solve problems with growing energy demand of population in the future. Wendelstein 7-X (W7-X) is an experimental stellarator of the helias type fusion reactor currently being built in Greifswald, Germany. This experimental stellarator is a complex structure, such as nuclear power plants and high level of safety requirements should be used for structural integrity analysis. It is thus not possible to obtain simple solutions for general cases, therefore sophisticated methods are necessary for the analysis. Inside the Plasma Vessel (PV) of W7-X there is a number of different components such as pipes, divertors, baffles and targets. A guillotine failure of one component is very dangerous for structural integrity of surrounding components located in PV. For this reason it is very important to evaluate possibility to apply “leak before break” (LBB) concept for W7-X. The LBB concept is widely used in the nuclear industry to describe the idea that in the piping carrying the coolant of a power reactor a leak will occur before a catastrophic break will occurred. LBB allows to conduct the structural design without considering the loads due to postulated line breaks. The LBB analysis was made for the case when plasma vessel is operating in “baking” mode. “Baking” is the mode, when the cooling system is working as a warming system and it heats the plasma vessel structures up to 160 °C in order to release the absorbed gases from the surfaces and to pump them out of the plasma vessel before plasma operation. The LBB analysis was performed for most loaded component of target module. According to the results of the analysis it is possible to conclude that target module 1H

Dam Break Analysis of Embankment Dams Considering Breach Characteristics

Directory of Open Access Journals (Sweden)

Abolfazl Shamsaei

2004-05-01

Full Text Available The study of dam's break, needs the definition of various parameters such as the break cause, its type, its dimension and the duration of breach development. The precise forecast for different aspects of the breach is one of the most important factors for analyzing it in embankment dam. The characteristics of the breach and determination of their vulnerability has the most effect on the waves resulting from dam break. Investigating, about the parameters of the breach in "Silveh" earth dam have been determined using the suitable model. In Silve dam a trapezoid breach with side slope z=0.01m and the average base line b=80m was computed. The duration of the breaches development is 1.9 hour. Regarding the above results and the application of DAM Break software the consequences of the probable break of the dam was determined. The analysis of the results of water covering of the city of Piranshahr located 12km from silve dam confirms that in 3 hours the water will reach the height (level of 1425 meters.

Improving long term driving comfort by taking breaks - how break activity affects effectiveness

OpenAIRE

Sammonds, GM; Mansfield, NJ; Fray, M

2017-01-01

During long duration journeys, drivers are encouraged to take regular breaks. The benefits of breaks have been documented for safety; breaks may also be beneficial for comfort. The activity undertaken during a break may influence its effectiveness. Volunteers completed 3 journeys on a driving simulator. Each 130 min journey included a 10 min break after the first hour. During the break volunteers either stayed seated, left the simulator and sat in an adjacent room, or took a walk on a treadmi...

Improving long term driving comfort by taking breaks - How break activity affects effectiveness.

Science.gov (United States)

Sammonds, George M; Mansfield, Neil J; Fray, Mike

2017-11-01

During long duration journeys, drivers are encouraged to take regular breaks. The benefits of breaks have been documented for safety; breaks may also be beneficial for comfort. The activity undertaken during a break may influence its effectiveness. Volunteers completed 3 journeys on a driving simulator. Each 130 min journey included a 10 min break after the first hour. During the break volunteers either stayed seated, left the simulator and sat in an adjacent room, or took a walk on a treadmill. The results show a reduction in driver discomfort during the break for all 3 conditions, but the effectiveness of the break was dependent on activity undertaken. Remaining seated in the vehicle provided some improvement in comfort, but more was experienced after leaving the simulator and sitting in an adjacent room. The most effective break occurred when the driver walked for 10 min on a treadmill. The benefits from taking a break continued until the end of the study (after a further hour of driving), such that comfort remained the best after taking a walk and worst for those who remained seated. It is concluded that taking a break and taking a walk is an effective method for relieving driving discomfort. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hydraulic Response of Caisson Breakwaters in Multidirectional Breaking and Non-Breaking Waves

DEFF Research Database (Denmark)

Grønbech, J.; Kofoed, Jens Peter; Hald, Tue

1998-01-01

The present paper concerns the results and findings of a physical study on wave impacts on vertical caisson breakwaters situated in irregular, multidirectional breaking seas. The study has taken place as part of the framework programme "Dynamic of Structures" financially supported by the Danish T...... breaking waves at deep water. The study on wave overtopping showed that the 3D wave overtopping formula suggested by Franco et al., 1995b, predicts the wave overtopping reasonable well for both non breaking and breaking waves at deep water.......The present paper concerns the results and findings of a physical study on wave impacts on vertical caisson breakwaters situated in irregular, multidirectional breaking seas. The study has taken place as part of the framework programme "Dynamic of Structures" financially supported by the Danish...... induced loading and overtopping on caisson breakwaters situated in breaking seas. Regarding the wave forces only minor differences between breaking and non breaking waves in deep water were observed, and it was found that the prediction formula of Goda also seems to apply well for multidirectionally...

A realistic extension of gauge-mediated SUSY-breaking model with superconformal hidden sector

International Nuclear Information System (INIS)

Asano, Masaki; Hisano, Junji; Okada, Takashi; Sugiyama, Shohei

2009-01-01

The sequestering of supersymmetry (SUSY) breaking parameters, which is induced by superconformal hidden sector, is one of the solutions for the μ/B μ problem in gauge-mediated SUSY-breaking scenario. However, it is found that the minimal messenger model does not derive the correct electroweak symmetry breaking. In this Letter we present a model which has the coupling of the messengers with the SO(10) GUT-symmetry breaking Higgs fields. The model is one of the realistic extensions of the gauge mediation model with superconformal hidden sector. It is shown that the extension is applicable for a broad range of conformality breaking scale

About peculiarities of application of the method of fast expansions in the solution of the Navier-Stokes equations

Directory of Open Access Journals (Sweden)

A. D. Chernyshov

2017-01-01

Full Text Available The brief presentation of the method of fast expansions is given to solve nonlinear differential equations. Application  rules of the operator of fast expansions are specified for solving differential equations. According to the method of fast expansions, an unknown function can be represented as the sum of the boundary function and Fourier series sines and cosines for one variable. The special construction of the boundary functions leads to reasonably fast convergence of the Fourier series, so that for engineering calculations, it is sufficient to consider only the first three members. The method is applicable both to linear and nonlinear integro-differential systems. By means of applying the method of fast expansions to nonlinear Navier-Stokes equations the problem is reduced to a closed system of ordinary differential equations, which solution doesn't represent special difficulties. We can reapply the method of fast expansions to the resulting system of differential equations and reduce the original problem to a system of algebraic equations. If the problem is n-dimensional, then after n-fold application of the method of fast expansions the problem will be reduced to a closed algebraic system. Finally, we obtain an analytic-form solution of complicated boundary value problem in partial derivatives. The flow of an incompressible viscous fluid of Navier–Stokes is considered in a curvilinear pipe. The problem is reduced to solving a closed system of ordinary differential equations with boundary conditions by the method of fast expansions. The article considers peculiarities of finding the coefficients of boundary functions and Fourier coefficients for the zero-order and first-order operators of fast expansions. Obtaining the analytic-form solution is of great interest, because it allows to analyze and to investigate the influence of various factors on the properties of the viscous fluid in specific cases.

Supramolecular Systems and Chemical Reactions in Single-Molecule Break Junctions.

Science.gov (United States)

Li, Xiaohui; Hu, Duan; Tan, Zhibing; Bai, Jie; Xiao, Zongyuan; Yang, Yang; Shi, Jia; Hong, Wenjing

2017-04-01

The major challenges of molecular electronics are the understanding and manipulation of the electron transport through the single-molecule junction. With the single-molecule break junction techniques, including scanning tunneling microscope break junction technique and mechanically controllable break junction technique, the charge transport through various single-molecule and supramolecular junctions has been studied during the dynamic fabrication and continuous characterization of molecular junctions. This review starts from the charge transport characterization of supramolecular junctions through a variety of noncovalent interactions, such as hydrogen bond, π-π interaction, and electrostatic force. We further review the recent progress in constructing highly conductive molecular junctions via chemical reactions, the response of molecular junctions to external stimuli, as well as the application of break junction techniques in controlling and monitoring chemical reactions in situ. We suggest that beyond the measurement of single molecular conductance, the single-molecule break junction techniques provide a promising access to study molecular assembly and chemical reactions at the single-molecule scale.

Break-Even Points of Battery Energy Storage Systems for Peak Shaving Applications

Directory of Open Access Journals (Sweden)

Claudia Rahmann

2017-06-01

Full Text Available In the last few years, several investigations have been carried out in the field of optimal sizing of energy storage systems (ESSs at both the transmission and distribution levels. Nevertheless, most of these works make important assumptions about key factors affecting ESS profitability such as efficiency and life cycles and especially about the specific costs of the ESS, without considering the uncertainty involved. In this context, this work aims to answer the question: what should be the costs of different ESS technologies in order to make a profit when considering peak shaving applications? The paper presents a comprehensive sensitivity analysis of the interaction between the profitability of an ESS project and some key parameters influencing the project performance. The proposed approach determines the break-even points for different ESSs considering a wide range of life cycles, efficiencies, energy prices, and power prices. To do this, an optimization algorithm for the sizing of ESSs is proposed from a distribution company perspective. From the results, it is possible to conclude that, depending on the values of round trip efficiency, life cycles, and power price, there are four battery energy storage systems (BESS technologies that are already profitable when only peak shaving applications are considered: lead acid, NaS, ZnBr, and vanadium redox.

Induction and disappearance of G2 chromatid breaks in lymphocytes after low doses of low LET γ - rays and high LET fast neutrons

International Nuclear Information System (INIS)

Vral, Anne; Thierens, Hubert; Baeyens, Ans; De Ridder, Leo

2001-01-01

In view of the potential importance of the G2 assay for detecting chromosomal radiosensitivity and possible predisposition to cancer the need to elucidate the mechanism underlying the formation of chromatid breaks, observed with the G2 assay after low dose irradiation, has been recognised. In this study we irradiated blood samples of 4 healthy donors with low LET γ-rays and high LET neutrons, which initially produce the same number of dsb but of a different quality. By means of the G2 assay, we determined the number of chromatid breaks induced by γ-rays and neutrons and compared the kinetics of chromatid break rejoining for radiations of different quality. In a first set of experiments a dose-response curve for the formation of chromatid breaks was carried out for γ-rays and neutrons with doses ranging between 0.1 and 0.5 Gy. In a second set of experiments the kinetics of chromatid break formation and disappearance was investigated after a dose of 0.5 Gy using post-irradiation times ranging between 0.5 h and 3.5 h. For the highest dose of 0.5 Gy the number of isochromatid breaks were also scored. No significant differences in the number of chromatid breaks were observed between low LET γ-rays and high LET neutrons for the 4 donors at any of the doses given. The dose response curves for the formation of chromatid breaks are linear for both radiation qualities and RBE values equal to one were obtained. Scoring of isochromatid breaks at the highest dose of 0.5 Gy revealed that high LET neutrons are however more effective at inducing isochromatid breaks (RBE of 6.2). The rejoining experiments further showed that the kinetics of disappearance of chromatid breaks following irradiation with low LET γ-rays or high-LET neutrons are not significantly different. T 1/2 0.92 h for γ-rays and t 1/2 = 0.84 h for neutrons were obtained. In conclusion, our results show that at low doses of radiation the induction as well as the disappearance of G2 chromatid breaks is LET

Preliminary Development of the MARS/FREK Spatial Kinetics Coupled System Code for Square Fueled Fast Reactor Applications

International Nuclear Information System (INIS)

Bae, Moo Hoon; Joo, Han Gyu

2009-01-01

Incorporation of a three-dimensional (3-D) reactor kinetics model into a system thermal-hydraulic (T/H) code enhances the capability to perform realistic analyses of the core neutronic behavior and the plant system dynamics which are coupled each other. For this advantage, several coupled system T/H and spatial kinetics codes, such as RELAP/PARCS, RELAP5/ PANBOX, and MARS/MASTER have been developed. These codes, however, so far limited to LWR applications. The objective of this work is to develop such a coupled code for fast reactor applications. Particularly, applications to lead-bismuth eutectic (LBE) cooled fast reactor are of interest which employ open square lattices. A fast reactor kinetics code applicable to square fueled cores called FREK is coupled the LBE version of the MARS code. The MARS/MASTER coupled code is used as the reference for the integration. The coupled code MARS/FREK is examined for a conceptual reactor called P-DEMO which is being developed by NUTRECK. In order to check the validity of the coupled code, however, the OECD MSLB benchmark exercise III calculation is solved first

B-L mediated SUSY breaking with radiative B-L symmetry breaking

International Nuclear Information System (INIS)

Kikuchi, Tatsuru; Kubo, Takayuki

2008-01-01

We explore a mechanism of radiative B-L symmetry breaking in analogous to the radiative electroweak symmetry breaking. The breaking scale of B-L symmetry is related to the neutrino masses through the see-saw mechanism. Once we incorporate the U(1) B-L gauge symmetry in SUSY models, the U(1) B-L gaugino, Z-tilde B-L appears, and it can mediate the SUSY breaking (Z-prime mediated SUSY breaking) at around the scale of 10 6 GeV. Then we find a links between the neutrino mass (more precisly the see-saw or B-L scale of order 10 6 GeV) and the Z-prime mediated SUSY breaking scale. It is also very interesting that the gluino at the weak scale becomes relatively light, and almost compressed mass spectra for the gaugino sector can be realized in this scenario, which is very interesting in scope of the LHC.

Spontaneous SUSY breaking without R symmetry in supergravity

Science.gov (United States)

Maekawa, Nobuhiro; Omura, Yuji; Shigekami, Yoshihiro; Yoshida, Manabu

2018-03-01

We discuss spontaneous supersymmetry (SUSY) breaking in a model with an anomalous U (1 )A symmetry. In this model, the size of the each term in the superpotential is controlled by the U (1 )A charge assignment and SUSY is spontaneously broken via the Fayet-Iliopoulos of U (1 )A at the metastable vacuum. In the global SUSY analysis, the gaugino masses become much smaller than the sfermion masses, because an approximate R symmetry appears at the SUSY breaking vacuum. In this paper, we show that gaugino masses can be as large as gravitino mass, taking the supergravity effect into consideration. This is because the R symmetry is not imposed so that the constant term in the superpotential, which is irrelevant to the global SUSY analysis, largely contributes to the soft SUSY breaking terms in the supergravity. As the mediation mechanism, we introduce the contributions of the field not charged under U (1 )A and the moduli field to cancel the anomaly of U (1 )A. We comment on the application of our SUSY breaking scenario to the grand unified theory.

Parental Break-Ups and Stress

DEFF Research Database (Denmark)

Dissing, Agnete S.; Dich, Nadya; Nybo Andersen, Anne-Marie

2017-01-01

Background: Parental break-up is wide spread, and the effects of parental break-up on children’s well-being are known. The evidence regarding child age at break-up and subsequent family arrangements is inconclusive. Aim: to estimate the effects of parental break-up on stress in pre-adolescent chi......Background: Parental break-up is wide spread, and the effects of parental break-up on children’s well-being are known. The evidence regarding child age at break-up and subsequent family arrangements is inconclusive. Aim: to estimate the effects of parental break-up on stress in pre......-adolescent children with a specific focus on age at break-up and post-breakup family arrangements. Methods: We used data from the Danish National Birth Cohort. Participants included 44 509 children followed from birth to age 11. Stress was self-reported by children at age 11, when the children also reported...... on parental break-up and post break-up family arrangements. Results: Twenty-one percent of the children had experienced a parental break-up at age 11, and those who had experienced parental break-up showed a higher risk of stress (OR:1.72, 95%CI:1.55;1.91) regardless of the child’s age at break-up. Children...

Attributing Changing Rates of Temperature Record Breaking to Anthropogenic Influences

Science.gov (United States)

King, Andrew D.

2017-11-01

Record-breaking temperatures attract attention from the media, so understanding how and why the rate of record breaking is changing may be useful in communicating the effects of climate change. A simple methodology designed for estimating the anthropogenic influence on rates of record breaking in a given time series is proposed here. The frequency of hot and cold record-breaking temperature occurrences is shown to be changing due to the anthropogenic influence on the climate. Using ensembles of model simulations with and without human-induced forcings, it is demonstrated that the effect of climate change on global record-breaking temperatures can be detected as far back as the 1930s. On local scales, a climate change signal is detected more recently at most locations. The anthropogenic influence on the increased occurrence of hot record-breaking temperatures is clearer than it is for the decreased occurrence of cold records. The approach proposed here could be applied in rapid attribution studies of record extremes to quantify the influence of climate change on the rate of record breaking in addition to the climate anomaly being studied. This application is demonstrated for the global temperature record of 2016 and the Central England temperature record in 2014.

Fasting ramadan in kidney transplant patients is safe

Directory of Open Access Journals (Sweden)

Boobes Yousef

2009-01-01

Full Text Available Muslims with renal transplant often ask their doctors whether fasting Ramadan is safe. Scanty studies have addressed this question. This prospective study was undertaken to identify any clinical or biological changes with Muslim fasting. 22 kidney transplant patients with stable kidney functions, who were transplanted for more than one year, and voluntarily chose to fast during Ramadan in 1425 H (October-November 2004, were studied. Total of 22 subjects (10 men and 12 women with a mean age of 47 ± 11.6 years were studied. Full clinical and biological assessment was done before during and after the month of Ramadan fasting. Medications were taken in two divided doses at sunset (time of breaking the fast and pre dawn (before the fast. None of the patients experienced any undue fatigue, or symptoms. Body weight, blood pressure, kidney function tests, blood sugar, lipid profile, and cyclosporine levels remained stable. In conclusion it is safe for renal transplant recipients of more than one year and having stable graft function to fast during the month of Ramadan; however caution is advised for moderate to severe impaired renal function.

Fast Track to the Cloud: Design Patterns for 12-Factor Earth Sciences Applications

Science.gov (United States)

Pawloski, Andrew; McLaughlin, Brett; Lynnes, Christopher

2016-01-01

As expanding service offerings and decreasing prices make the cloud increasingly attractive to Earth Science applications, there are nontrivial practical considerations which can hinder its meaningful use. In this talk, we will discuss architectural recommendations and lessons learned while working on EOSDIS' cloud efforts, particularly the NASA-compliant General Application Platform (NGAP) and its associated applications. Prominent in our findings is the importance of 12-factor design patterns and the powerful "wins" they enable in the cloud. We will share our strategies for "fast-tracking" applications to the cloud --whether they be legacy, planned for the future, or somewhere in between.

CSNI specialist meeting on leak-before-break in nuclear reactor piping: proceedings

Energy Technology Data Exchange (ETDEWEB)

1984-08-01

On September 1 and 2, 1983, the CSNI subcommittee on primary system integrity held a special meeting in Monterey, California, on the subject of leak-before-break in nuclear reactor piping systems. The purpose of the meeting was to provide an international forum for the exchange of ideas, positions, and research results; to identify areas requiring additional research and development; and to determine the general attitude toward acceptance of the leak-before-break concept. The importance of the leak-before-break issue was evidenced by excellent attendance at the meeting and through active participation by the meeting attendees. Approximately 125 people representing fifteen different nations attended the meeting. The meeting was divided into four technical sessions addressing the following areas: Application of Piping Fracture Mechanics to Leak-Before Break, Leak Rate and Leak Detection, Leak-Before-Break Studies, Methods and Results, Current and Proposed Positions on Leak-Before-Break.

CSNI specialist meeting on leak-before-break in nuclear reactor piping: proceedings

International Nuclear Information System (INIS)

1984-08-01

On September 1 and 2, 1983, the CSNI subcommittee on primary system integrity held a special meeting in Monterey, California, on the subject of leak-before-break in nuclear reactor piping systems. The purpose of the meeting was to provide an international forum for the exchange of ideas, positions, and research results; to identify areas requiring additional research and development; and to determine the general attitude toward acceptance of the leak-before-break concept. The importance of the leak-before-break issue was evidenced by excellent attendance at the meeting and through active participation by the meeting attendees. Approximately 125 people representing fifteen different nations attended the meeting. The meeting was divided into four technical sessions addressing the following areas: Application of Piping Fracture Mechanics to Leak-Before Break, Leak Rate and Leak Detection, Leak-Before-Break Studies, Methods and Results, Current and Proposed Positions on Leak-Before-Break

A MEMS-based super fast dew point hygrometer—construction and medical applications

International Nuclear Information System (INIS)

Jachowicz, Ryszard S; Weremczuk, Jerzy; Paczesny, Daniel; Tarapata, Grzegorz

2009-01-01

The paper shows how MEMS (micro-electro-mechanical system) technology and a modified principle of fast temperature control (by heat injection instead of careful control of cooling) can considerably improve the dynamic parameters of dew point hygrometers. Some aspects of MEMS-type integrated sensor construction and technology, whole measurement system design, the control algorithm to run the system as well as empirical dynamic parameters from the tests are discussed too. The hygrometer can easily obtain five to six measurements per second with an uncertainty of less than 0.3 K. The meter range is between −10 °C and 40 °C dew point. In the second part of the paper (section 2), two different successful applications in medicine based on fast humidity measurements have been discussed. Some specific constructions of these super fast dew point hygrometers based on a MEMS sensor as well as limited empirical results from clinical tests have been reported too

A MEMS-based super fast dew point hygrometer—construction and medical applications

Science.gov (United States)

Jachowicz, Ryszard S.; Weremczuk, Jerzy; Paczesny, Daniel; Tarapata, Grzegorz

2009-12-01

The paper shows how MEMS (micro-electro-mechanical system) technology and a modified principle of fast temperature control (by heat injection instead of careful control of cooling) can considerably improve the dynamic parameters of dew point hygrometers. Some aspects of MEMS-type integrated sensor construction and technology, whole measurement system design, the control algorithm to run the system as well as empirical dynamic parameters from the tests are discussed too. The hygrometer can easily obtain five to six measurements per second with an uncertainty of less than 0.3 K. The meter range is between -10 °C and 40 °C dew point. In the second part of the paper (section 2), two different successful applications in medicine based on fast humidity measurements have been discussed. Some specific constructions of these super fast dew point hygrometers based on a MEMS sensor as well as limited empirical results from clinical tests have been reported too.

Radiatively induced breaking of conformal symmetry in a superpotential

International Nuclear Information System (INIS)

Arbuzov, A.B.; Cirilo-Lombardo, D.J.

2016-01-01

Radiatively induced symmetry breaking is considered for a toy model with one scalar and one fermion field unified in a superfield. It is shown that the classical quartic self-interaction of the superfield possesses a quantum infrared singularity. Application of the Coleman–Weinberg mechanism for effective potential leads to the appearance of condensates and masses for both scalar and fermion components. That induces a spontaneous breaking of the initial classical symmetries: the supersymmetry and the conformal one. The energy scales for the scalar and fermion condensates appear to be of the same order, while the renormalization scale is many orders of magnitude higher. A possibility to relate the considered toy model to conformal symmetry breaking in the Standard Model is discussed.

Sodium fast reactors with closed fuel cycle

CERN Document Server

Raj, Baldev; Vasudeva Rao, PR 0

2015-01-01

Sodium Fast Reactors with Closed Fuel Cycle delivers a detailed discussion of an important technology that is being harnessed for commercial energy production in many parts of the world. Presenting the state of the art of sodium-cooled fast reactors with closed fuel cycles, this book:Offers in-depth coverage of reactor physics, materials, design, safety analysis, validations, engineering, construction, and commissioning aspectsFeatures a special chapter on allied sciences to highlight advanced reactor core materials, specialized manufacturing technologies, chemical sensors, in-service inspecti

Margins in high temperature leak-before-break assessments

Energy Technology Data Exchange (ETDEWEB)

Budden, P.J.; Hooton, D.G.

1997-04-01

Developments in the defect assessment procedure R6 to include high-temperature mechanisms in Leak-before-Break arguments are described. In particular, the effect of creep on the time available to detect a leak and on the crack opening area, and hence leak rate, is discussed. The competing influence of these two effects is emphasized by an example. The application to Leak-before-Break of the time-dependent failure assessment diagram approach for high temperature defect assessment is then outlined. The approach is shown to be of use in assessing the erosion of margins by creep.

Margins in high temperature leak-before-break assessments

International Nuclear Information System (INIS)

Budden, P.J.; Hooton, D.G.

1997-01-01

Developments in the defect assessment procedure R6 to include high-temperature mechanisms in Leak-before-Break arguments are described. In particular, the effect of creep on the time available to detect a leak and on the crack opening area, and hence leak rate, is discussed. The competing influence of these two effects is emphasized by an example. The application to Leak-before-Break of the time-dependent failure assessment diagram approach for high temperature defect assessment is then outlined. The approach is shown to be of use in assessing the erosion of margins by creep

The geometric role of symmetry breaking in gravity

International Nuclear Information System (INIS)

Wise, Derek K

2012-01-01

In gravity, breaking symmetry from a group G to a group H plays the role of describing geometry in relation to the geometry of the homogeneous space G/H. The deep reason for this is Cartan's 'method of equivalence,' giving, in particular, an exact correspondence between metrics and Cartan connections. I argue that broken symmetry is thus implicit in any gravity theory, for purely geometric reasons. As an application, I explain how this kind of thinking gives a new approach to Hamiltonian gravity in which an observer field spontaneously breaks Lorentz symmetry and gives a Cartan connection on space.

Repair of single-strand breaks induced in the DNA of Proteus mirabilis by excision repair after UV-irradiation

International Nuclear Information System (INIS)

Stoerl, K.; Mund, C.

1977-01-01

Single-strand breaks have been produced in the DNA of P. mirabilis after UV-irradiation in dependence on the incident UV-doses. It has been found that there exists a discrepancy between the single-strand breaks estimated from sedimentation in alkaline sucrose gradients and the expected single-strand breaks approximated from measurements of dimer excision. The low number in incision breaks observed by sedimentation experiments is an indication that the cells are able to repair the excision-induced breaks as fast as they are formed. Toluenized cells have been used for investigation of the incision step independently of subsequent repair processes. In presence of NMN the appearance of more single-strand breaks in the DNA has been observed. Furthermore, the number of incision breaks in toluenized cells increased in presence of exogenous ATP. The completion of the excision repair process has been investigated by observing the rejoining of incision breaks. After irradiation with UV-doses higher than approximately 240 erg/mm 2 the number of single-strand breaks remaining unrepaired in the DNA increased. Studies of the influence of nutrition conditions on the repair process have shown approximately the same capacity for repair of single-strand breaks in growth medium as well as in buffer. Progress in the excision repair was also followed by investigation of the DNA synthesized at the template-DNA containing the pyrimidine dimers. In comparison with E. coli, P. mirabilis showed a somewhat lower efficiency for the repair of single-strand breaks during the excision repair. (author)

Bayesian Belief Networks for predicting drinking water distribution system pipe breaks

International Nuclear Information System (INIS)

Francis, Royce A.; Guikema, Seth D.; Henneman, Lucas

2014-01-01

In this paper, we use Bayesian Belief Networks (BBNs) to construct a knowledge model for pipe breaks in a water zone. To the authors’ knowledge, this is the first attempt to model drinking water distribution system pipe breaks using BBNs. Development of expert systems such as BBNs for analyzing drinking water distribution system data is not only important for pipe break prediction, but is also a first step in preventing water loss and water quality deterioration through the application of machine learning techniques to facilitate data-based distribution system monitoring and asset management. Due to the difficulties in collecting, preparing, and managing drinking water distribution system data, most pipe break models can be classified as “statistical–physical” or “hypothesis-generating.” We develop the BBN with the hope of contributing to the “hypothesis-generating” class of models, while demonstrating the possibility that BBNs might also be used as “statistical–physical” models. Our model is learned from pipe breaks and covariate data from a mid-Atlantic United States (U.S.) drinking water distribution system network. BBN models are learned using a constraint-based method, a score-based method, and a hybrid method. Model evaluation is based on log-likelihood scoring. Sensitivity analysis using mutual information criterion is also reported. While our results indicate general agreement with prior results reported in pipe break modeling studies, they also suggest that it may be difficult to select among model alternatives. This model uncertainty may mean that more research is needed for understanding whether additional pipe break risk factors beyond age, break history, pipe material, and pipe diameter might be important for asset management planning. - Highlights: • We show Bayesian Networks for predictive and diagnostic management of water distribution systems. • Our model may enable system operators and managers to prioritize system

Duality after supersymmetry breaking

International Nuclear Information System (INIS)

Shadmi, Yael; Cheng, Hsin-Chia

1998-05-01

Starting with two supersymmetric dual theories, we imagine adding a chiral perturbation that breaks supersymmetry dynamically. At low energy we then get two theories with soft supersymmetry-breaking terms that are generated dynamically. With a canonical Kaehler potential, some of the scalars of the ''magnetic'' theory typically have negative mass-squared, and the vector-like symmetry is broken. Since for large supersymmetry breaking the ''electric'' theory becomes ordinary QCD, the two theories are then incompatible. For small supersymmetry breaking, if duality still holds, the magnetic theory analysis implies specific patterns of chiral symmetry breaking in supersymmetric QCD with small soft masses

Exposure to 'healthy' fast food meal bundles in television advertisements promotes liking for fast food but not healthier choices in children.

Science.gov (United States)

Boyland, Emma J; Kavanagh-Safran, Melissa; Halford, Jason C G

2015-03-28

Due to regulatory changes, fast food companies often depict healthy foods in their television advertisements to children. The present study examined how exposure to advertising for 'healthy' meal bundles to children influenced the selection of food in children. A total of fifty-nine children (thirty-seven males) aged 7-10 years (8·8 (SD 0·9) years) took part in the present study. The within-participant, counterbalanced design had two conditions: control (exposure to ten toy adverts across two breaks of five adverts each) and experimental (the middle advert in each break replaced with one for a McDonald's Happy Meal® depicting the meal bundle as consisting of fish fingers, a fruit bag and a bottle of mineral water). Following viewing of the adverts embedded in a cartoon, children completed a hypothetical menu task that reported liking for McDonald's food and fast food, in general. Nutritional knowledge, height and weight of the children were measured. There was no significant difference between the two advert conditions for the nutritional content of the meal bundles selected. However, children's liking for fast food, in general, increased after exposure to the food adverts relative to control (P= 0·004). Compared to children with high nutritional knowledge, those with low scores selected meals of greater energy content (305 kJ) after viewing the food adverts (P= 0·016). Exposure to adverts for 'healthy' meal bundles did not drive healthier choices in children, but did promote liking for fast food. These findings contribute to debates about food advertising to children and the effectiveness of related policies.

Patients' Attitude toward Breaking Bad News; a Brief Report.

Science.gov (United States)

Aminiahidashti, Hamed; Mousavi, Seyed Jaber; Darzi, Mohammad Mehdi

2016-01-01

Delivering bad news is a stressful moment for both physicians and patients. The purpose of this investigation was to explore the patients' preferences and attitudes toward being informed about the bad news. This cross-sectional study was done on patients admitted to Imam Khomeini Hospital, Sari, Iran, from September 2014 to February 2015. Patient attitude regarding breaking bad news was evaluated using a reliable and valid questionnaire. 130 patients were evaluated (61.5% male, mean age = 46.21 ± 12.1 years). 118 (90.76%) participants believed that the patient himself/herself should be informed about the disease's condition. 120 (92.30%) preferred to hear the news from a skillful physician and 105 (80.76%) believed that emergency department is not a proper place for breaking bad news. Based on the results of the present study, most participants believed that the most experienced and skillful physician should inform them completely regarding their medical condition. At the same time they declared that, it is best to hear bad news in a calm and suitable place and time rather than emergency department or hospital corridors during teaching rounds.

Spatio-Temporal Process Simulation of Dam-Break Flood Based on SPH

Science.gov (United States)

Wang, H.; Ye, F.; Ouyang, S.; Li, Z.

2018-04-01

On the basis of introducing the SPH (Smooth Particle Hydrodynamics) simulation method, the key research problems were given solutions in this paper, which ere the spatial scale and temporal scale adapting to the GIS(Geographical Information System) application, the boundary condition equations combined with the underlying surface, and the kernel function and parameters applicable to dam-break flood simulation. In this regards, a calculation method of spatio-temporal process emulation with elaborate particles for dam-break flood was proposed. Moreover the spatio-temporal process was dynamic simulated by using GIS modelling and visualization. The results show that the method gets more information, objectiveness and real situations.

Application of hafnium hydride control rod to large sodium cooled fast breeder reactor

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Kazumi, E-mail: kazumi_ikeda@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Moriwaki, Hiroyuki, E-mail: hiroyuki_moriwaki@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Ohkubo, Yoshiyuki, E-mail: yoshiyuki_okubo@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Iwasaki, Tomohiko, E-mail: tomohiko.iwasaki@qse.tohoku.ac.jp [Department of Quantum Science and Energy Engineering, Tohoku University, Aoba, Aramaki, Aoba-ku, Sendai-shi, Miyagi-ken 980-8579 (Japan); Konashi, Kenji, E-mail: konashi@imr.tohoku.ac.jp [Institute for Materials Research, Tohoku University, Narita-cho, Oarai-machi, Higashi-Ibaraki-gun, Ibaraki-ken 311-1313 (Japan)

2014-10-15

Highlights: • Application of hafnium hydride control rod to large sodium cooled fast breeder reactor. • This paper treats application of an innovative hafnium hydride control rod to a large sodium cooled fast breeder reactor. • Hydrogen absorption triples the reactivity worth by neutron spectrum shift at H/Hf ratio of 1.3. • Lifetime of the control rod quadruples because produced daughters of hafnium isotopes are absorbers. • Nuclear and thermal hydraulic characteristics of the reactor are as good as or better than B-10 enriched boron carbide. - Abstract: This study treats the feasibility of long-lived hafnium hydride control rod in a large sodium-cooled fast breeder reactor by nuclear and thermal analyses. According to the nuclear calculations, it is found that hydrogen absorption of hafnium triples the reactivity by the neutron spectrum shift at the H/Hf ratio of 1.3, and a hafnium transmutation mechanism that produced daughters are absorbers quadruples the lifetime due to a low incineration rate of absorbing nuclides under irradiation. That is to say, the control rod can function well for a long time because an irradiation of 2400 EFPD reduces the reactivity by only 4%. The calculation also reveals that the hafnium hydride control rod can apply to the reactor in that nuclear and thermal characteristics become as good as or better than 80% B-10 enriched boron carbide. For example, the maximum linear heat rate becomes 3% lower. Owing to the better power distribution, the required flow rate decreases approximately by 1%. Consequently, it is concluded on desk analyses that the long lived hafnium hydride control rod is feasible in the large sodium-cooled fast breeder reactor.

Application of the leak-before-break concept to the primary circuit piping of the Leningrad NPP

Energy Technology Data Exchange (ETDEWEB)

Eperin, A.P.; Zakharzhevsky, Yu.O.; Arzhaev, A.I. [and others

1997-04-01

A two-year Finnish-Russian cooperation program has been initiated in 1995 to demonstrate the applicability of the leak-before-break concept (LBB) to the primary circuit piping of the Leningrad NPP. The program includes J-R curve testing of authentic pipe materials at full operating temperature, screening and computational LBB analyses complying with the USNRC Standard Review Plan 3.6.3, and exchange of LBB-related information with emphasis on NDE. Domestic computer codes are mainly used, and all tests and analyses are independently carried out by each party. The results are believed to apply generally to RBMK type plants of the first generation.

A general-purpose trigger processor system and its application to fast vertex trigger

International Nuclear Information System (INIS)

Hazumi, M.; Banas, E.; Natkaniec, Z.; Ostrowicz, W.

1997-12-01

A general-purpose hardware trigger system has been developed. The system comprises programmable trigger processors and pattern generator/samplers. The hardware design of the system is described. An application as a prototype of the very fast vertex trigger in an asymmetric B-factory at KEK is also explained. (author)

Nurses' perspectives on breaking bad news to patients and their families: a qualitative content analysis.

Science.gov (United States)

Abbaszadeh, Abbas; Ehsani, Seyyedeh Roghayeh; Begjani, Jamal; Kaji, Mohammad Akbari; Dopolani, Fatemeh Nemati; Nejati, Amir; Mohammadnejad, Esmaeil

2014-01-01

Breaking bad news is quite often not done in an effective manner in clinical settings due to the medical staff lacking the skills necessary for speaking to patients and their families. Bad news is faced with similar reactions on the part of the news receiver in all cultures and nations. The purpose of this study was to explore the perspectives of Iranian nurses on breaking bad news to patients and their families. In this research, a qualitative approach was adopted. In-depth and semi-structured interviews were conducted with 19 nurses who had at least one year work experience in the ward, and content analysis was performed to analyze the data. Five major categories emerged from data analysis, including effective communication with patients and their families, preparing the ground for delivering bad news, minimizing the negativity associated with the disease, passing the duty to physicians, and helping patients and their families make logical treatment decisions. The results of this study show that according to the participants, it is the physicians' duty to give bad news, but nurses play an important role in delivering bad news to patients and their companions and should therefore be trained in clinical and communicative skills to be able to give bad news in an appropriate and effective manner.

Fast Bound Methods for Large Scale Simulation with Application for Engineering Optimization

Science.gov (United States)

Patera, Anthony T.; Peraire, Jaime; Zang, Thomas A. (Technical Monitor)

2002-01-01

In this work, we have focused on fast bound methods for large scale simulation with application for engineering optimization. The emphasis is on the development of techniques that provide both very fast turnaround and a certificate of Fidelity; these attributes ensure that the results are indeed relevant to - and trustworthy within - the engineering context. The bound methodology which underlies this work has many different instantiations: finite element approximation; iterative solution techniques; and reduced-basis (parameter) approximation. In this grant we have, in fact, treated all three, but most of our effort has been concentrated on the first and third. We describe these below briefly - but with a pointer to an Appendix which describes, in some detail, the current "state of the art."

Genome-wide mapping of DNA strand breaks.

Directory of Open Access Journals (Sweden)

Frédéric Leduc

Full Text Available Determination of cellular DNA damage has so far been limited to global assessment of genome integrity whereas nucleotide-level mapping has been restricted to specific loci by the use of specific primers. Therefore, only limited DNA sequences can be studied and novel regions of genomic instability can hardly be discovered. Using a well-characterized yeast model, we describe a straightforward strategy to map genome-wide DNA strand breaks without compromising nucleotide-level resolution. This technique, termed "damaged DNA immunoprecipitation" (dDIP, uses immunoprecipitation and the terminal deoxynucleotidyl transferase-mediated dUTP-biotin end-labeling (TUNEL to capture DNA at break sites. When used in combination with microarray or next-generation sequencing technologies, dDIP will allow researchers to map genome-wide DNA strand breaks as well as other types of DNA damage and to establish a clear profiling of altered genes and/or intergenic sequences in various experimental conditions. This mapping technique could find several applications for instance in the study of aging, genotoxic drug screening, cancer, meiosis, radiation and oxidative DNA damage.

Fasting mitigates immediate hypersensitivity: a pivotal role of endogenous D-beta-hydroxybutyrate.

Science.gov (United States)

Nakamura, Shigeru; Hisamura, Ryuji; Shimoda, Sachiko; Shibuya, Izumi; Tsubota, Kazuo

2014-01-01

Fasting is a rigorous type of dietary restriction that is associate with a number of health benefits. During fasting, ketone bodies significantly increase in blood and become major body fuels, thereby sparing glucose. In the present study, we investigated effects of fasting on hypersensitivity. In addition, we also investigated the possible role of D-beta-hydroxybutyrate provoked by fasting in the attenuation of immediate hypersensitivity by fasting. Effects of fasting on systemic anaphylaxis were examined using rat model of toluene 2, 4-diisocyanate induced nasal allergy. In addition to food restriction, a ketogenic high-fat and low-carbohydrate diet that accelerates fatty acid oxidation and systemic instillation of D-beta-hydroxybutyrate were employed to elevate internal D-beta-hydroxybutyrate concentration. We assessed relationship between degranulation of rat peritoneal mast cells and internal D-beta-hydroxybutyrate concentration in each treatment. Changes in [Ca(2+)]i responses to compound 48/80 were analyzed in fura 2-loaded rat peritoneal mast cells derived from the ketogenic diet and fasting. Immediate hypersensitivity reaction was significantly suppressed by fasting. A significant reduction in mast cells degranulation, induced by mast cell activator compound 48/80, was observed in rat peritoneal mast cells delivered from the 24 hours fasting treatment. In addition, mast cells delivered from a ketogenic diet and D-beta-hydroxybutyrate infusion treatment also had reduced mast cell degranulation and systemic D-beta-hydroxybutyrate concentrations were elevated to similar extent as the fasting state. The peak increase in [Ca(2+)]i was significantly lower in the ketogenic diet and fasting group than that in the control diet group. The results of the present study demonstrates that fasting suppress hypersensitivity reaction, and indicate that increased level of D-beta-hydroxybutyrate by fasting plays an important role, via the stabilization of mast cells, in

Peaking cladding temperature and break equivalent size of intermediate break loss of coolant accident

International Nuclear Information System (INIS)

Luo Bangqi

2012-01-01

The analysis results of intermediate break loss of coolant accident for the nuclear power plant of million kw level showed to be as following: (1) At the begin of life, the break occur simultaneity reactor shutdown with L(X)P. it's equivalent break size and peaking cladding temperature is respectively 20 cm and 849℃. (2) At the begin of life, the break occur simultaneity reactor shutdown without loop. the reactor coolant pumps will be stop after reactor shutdown 10 minutes, it's equivalent break size and peaking cladding temperature is respectively 10.5 cm and 921℃. (3) At the bur up of 31 GWd/t(EOC1). the break occur simultaneity reactor shutdown without loop, the reactor coolant pumps will be stop after reactor shutdown 20 minutes, it's equivalent break size and peaking cladding temperature is respectively 8 cm and 1145℃. The above analysis results showed that the peaking cladding temperature of intermediate break loss of coolant accident is not only related with the break equivalent size and core bur up, and is closely related with the stop time of coolant pumps because the coolant pumps would drive the coolant from safety system to produce the seal loop in break loop and affect the core coolant flow, results in the fuel cladding temperature increasing or damaging. Therefore, the break spectrum, burn up spectrum, the stop time of coolant pumps and operator action time will need to detail analysis and provide appropriate operating procedure, otherwise the peaking cladding temperature will exceed 1204℃ and threaten the safety of the reactor core when the intermediate break loss of coolant accident occur in some break equivalent size, burn up, stop pumps time and operator action not appropriate. The pressurizer pressure low signal simultaneity containment pressure higher signal were used as the operator manual close the signal of reactor coolant pumps after reactor shutdown of 20 minutes. have successful solved the operator intervention time from 10 minutes

Analysis of the NPP-V1 primary circuit fast cooldown

International Nuclear Information System (INIS)

Filo, J.; Bazso, Z.; Vranka, L.

1994-01-01

Results of thermal-hydraulic calculations of the NPP-V1 primary circuit fast cooldown during small leakage through openings of diameter 20, 32 and 50 mm as well as analyses of cooldown following the steam pipeline break at nominal and null reactor power are given in this paper. 4 refs, 24 figs, 1 tab

Break-collapse method for resistor networks-renormalization group applications

International Nuclear Information System (INIS)

Tsallis, C.; Coniglio, A.; Redner, S.

1982-01-01

The break-collapse method recently introduced for the q-state Potts model is adapted for resistor networks. This method greatly simplifies the calculation of the conductance of an arbitrary two-terminal d-dimensional array of conductances, obviating the use of either Kirchhoff's laws or the star-triangle or similiar transformations. Related properties are discussed as well. An illustrative real-space renormalization-group treatment of the random resistor problem on the square lattice is presented; satisfactory results are obtained. (Author) [pt

Application of fast Fourier transform in thermo-magnetic convection analysis

International Nuclear Information System (INIS)

Pyrda, L

2014-01-01

Application of Fast Fourier Transform in thermo-magnetic convection is reported. Cubical enclosure filled with paramagnetic fluid heated from below and placed in the strong magnetic field gradients was investigated. The main aim of study was connected with identification of flow types, especially transition to turbulence. For this purpose the Fast Fourier Transform (FFT) analysis was applied. It was followed by the heat transfer characteristic for various values of magnetic induction gradient. The analysis was done at two Rayleigh numbers 7.89·10 5 and 1.86·10 6 with thermo-magnetic Rayleigh numbers up to 1.8·10 8 and 4.5·10 8 respectively. The presented results clearly indicate flow types and also demonstrate augmented heat transfer in dependence on magnetic induction gradient. Detailed analysis of flow transition to turbulent state was compared with transition line for natural convection reported in literature. The transition to turbulence in the case of thermo-magnetic convection of paramagnetic fluid was in very good agreement with transition in the case of natural convection.

NJOY processed multigroup library for fast reactor applications and point data library for MCNP - Experience and validation

International Nuclear Information System (INIS)

Kim Jung-Do; Gil Choong-Sup

1996-01-01

JEF-1-based 50-group cross section library for fast reactor applications and point data library for continuous-energy Monte Carlo code MCNP have been generated using NJOY91.38 system. They have been examined by analyzing measured integral quantities such as criticality and central reaction rate ratios for 8 small fast critical assemblies. (author). 9 refs, 2 figs, 10 tabs

A Fast Optimization Method for Reliability and Performance of Cloud Services Composition Application

Directory of Open Access Journals (Sweden)

Zhao Wu

2013-01-01

Full Text Available At present the cloud computing is one of the newest trends of distributed computation, which is propelling another important revolution of software industry. The cloud services composition is one of the key techniques in software development. The optimization for reliability and performance of cloud services composition application, which is a typical stochastic optimization problem, is confronted with severe challenges due to its randomness and long transaction, as well as the characteristics of the cloud computing resources such as openness and dynamic. The traditional reliability and performance optimization techniques, for example, Markov model and state space analysis and so forth, have some defects such as being too time consuming and easy to cause state space explosion and unsatisfied the assumptions of component execution independence. To overcome these defects, we propose a fast optimization method for reliability and performance of cloud services composition application based on universal generating function and genetic algorithm in this paper. At first, a reliability and performance model for cloud service composition application based on the multiple state system theory is presented. Then the reliability and performance definition based on universal generating function is proposed. Based on this, a fast reliability and performance optimization algorithm is presented. In the end, the illustrative examples are given.

Performance evaluation of novel LaBr3(Ce) scintillator geometries for fast-timing applications

International Nuclear Information System (INIS)

Vedia, V.; Carmona-Gallardo, M.; Fraile, L.M.; Mach, H.; Udías, J.M.

2017-01-01

We evaluate the performance of two LaBr 3 (Ce) crystals that were produced with special geometries, aimed at enhancing the scintillation light collection and thus the time resolution. Their design was motivated by the construction of high-performance fast-timing arrays like the FAst TIMing array for DESPEC (FATIMA), which demands a high packing factor in addition to good time and energy resolutions. Energy resolution and efficiency were measured using standard calibration sources. Timing measurements were performed at 60 Co and 22 Na γ-energies against a fast BaF 2 reference detector. The time resolution was optimized by the choice of the photomultiplier bias voltage and the fine tuning of the constant fraction discriminator parameters. Monte Carlo simulations using the Geant4 toolkit were performed in order to achieve a better understanding of how the new geometries affect the light transport and thus the performance of the crystals. It is found that the conical-shaped LaBr 3 (Ce) crystals are optimal for fast-timing applications and for the construction of arrays such as FATIMA.

Fast-responding liquid crystal light-valve technology for color-sequential display applications

Science.gov (United States)

Janssen, Peter J.; Konovalov, Victor A.; Muravski, Anatoli A.; Yakovenko, Sergei Y.

1996-04-01

A color sequential projection system has some distinct advantages over conventional systems which make it uniquely suitable for consumer TV as well as high performance professional applications such as computer monitors and electronic cinema. A fast responding light-valve is, clearly, essential for a good performing system. Response speed of transmissive LC lightvalves has been marginal thus far for good color rendition. Recently, Sevchenko Institute has made some very fast reflective LC cells which were evaluated at Philips Labs. These devices showed sub millisecond-large signal-response times, even at room temperature, and produced good color in a projector emulation testbed. In our presentation we describe our highly efficient color sequential projector and demonstrate its operation on video tape. Next we discuss light-valve requirements and reflective light-valve test results.

Orthogonality-breaking sensing model based on the instantaneous Stokes vector and the Mueller calculus

Science.gov (United States)

Ortega-Quijano, Noé; Fade, Julien; Roche, Muriel; Parnet, François; Alouini, Mehdi

2016-04-01

Polarimetric sensing by orthogonality breaking has been recently proposed as an alternative technique for performing direct and fast polarimetric measurements using a specific dual-frequency dual-polarization (DFDP) source. Based on the instantaneous Stokes-Mueller formalism to describe the high-frequency evolution of the DFDP beam intensity, we thoroughly analyze the interaction of such a beam with birefringent, dichroic and depolarizing samples. This allows us to confirm that orthogonality breaking is produced by the sample diattenuation, whereas this technique is immune to both birefringence and diagonal depolarization. We further analyze the robustness of this technique when polarimetric sensing is performed through a birefringent waveguide, and the optimal DFDP source configuration for fiber-based endoscopic measurements is subsequently identified. Finally, we consider a stochastic depolarization model based on an ensemble of random linear diattenuators, which makes it possible to understand the progressive vanishing of the detected orthogonality breaking signal as the spatial heterogeneity of the sample increases, thus confirming the insensitivity of this method to diagonal depolarization. The fact that the orthogonality breaking signal is exclusively due to the sample dichroism is an advantageous feature for the precise decoupled characterization of such an anisotropic parameter in samples showing several simultaneous effects.

The Beam Break-Up Numerical Simulator

International Nuclear Information System (INIS)

Travish, G.A.

1989-11-01

Beam Break-Up (BBU) is a severe constraint in accelerator design, limiting beam current and quality. The control of BBU has become the focus of much research in the design of the next generation collider, recirculating and linear induction accelerators and advanced accelerators. Determining the effect on BBU of modifications to cavities, the focusing elements or the beam is frequently beyond the ability of current analytic models. A computer code was written to address this problem. The Beam Break-Up Numerical Simulator (BBUNS) was designed to numerically solve for beam break-up (BBU) due to an arbitrary transverse wakefield. BBUNS was developed to be as user friendly as possible on the Cray computer series. The user is able to control all aspects of input and output by using a single command file. In addition, the wakefield is specified by the user and read in as a table. The program can model energy variations along and within the beam, focusing magnetic field profiles can be specified, and the graphical output can be tailored. In this note we discuss BBUNS, its structure and application. Included are detailed instructions, examples and a sample session of BBUNS. This program is available for distribution. 50 refs., 18 figs., 5 tabs

Growth of nanocrystalline silicon thin film with layer-by-layer technique for fast photo-detecting applications

International Nuclear Information System (INIS)

Lin, C.-Y.; Fang, Y.-K.; Chen, S.-F.; Lin, P.-C.; Lin, C.-S.; Chou, T.-H; Hwang, J.S.; Lin, K.I.

2006-01-01

High mobility nanocrystalline silicon (nc-Si) films with layer-by-layer technique for fast photo-detecting applications were studied. The structure and morphology of films were studied by means of XRD, micro-Raman scattering, SEM and AFM. The Hall mobility and absorption properties have been investigated and found they were seriously affected by the number of layers in growing, i.e., with increasing of layer number, Hall mobility increased but absorption coefficient decreased. The optimum layer number of nc-Si films for fast near-IR photo-detecting is 7 with film thickness of 1400 nm, while that for fast visible photo-detecting is 17 with film thickness of 3400 nm

Breaking object correspondence across saccadic eye movements deteriorates object recognition

Directory of Open Access Journals (Sweden)

Christian H. Poth

2015-12-01

Full Text Available Visual perception is based on information processing during periods of eye fixations that are interrupted by fast saccadic eye movements. The ability to sample and relate information on task-relevant objects across fixations implies that correspondence between presaccadic and postsaccadic objects is established. Postsaccadic object information usually updates and overwrites information on the corresponding presaccadic object. The presaccadic object representation is then lost. In contrast, the presaccadic object is conserved when object correspondence is broken. This helps transsaccadic memory but it may impose attentional costs on object recognition. Therefore, we investigated how breaking object correspondence across the saccade affects postsaccadic object recognition. In Experiment 1, object correspondence was broken by a brief postsaccadic blank screen. Observers made a saccade to a peripheral object which was displaced during the saccade. This object reappeared either immediately after the saccade or after the blank screen. Within the postsaccadic object, a letter was briefly presented (terminated by a mask. Observers reported displacement direction and letter identity in different blocks. Breaking object correspondence by blanking improved displacement identification but deteriorated postsaccadic letter recognition. In Experiment 2, object correspondence was broken by changing the object’s contrast-polarity. There were no object displacements and observers only reported letter identity. Again, breaking object correspondence deteriorated postsaccadic letter recognition. These findings identify transsaccadic object correspondence as a key determinant of object recognition across the saccade. This is in line with the recent hypothesis that breaking object correspondence results in separate representations of presaccadic and postsaccadic objects which then compete for limited attentional processing resources (Schneider, 2013. Postsaccadic

Material property requirements for application leak-before-break technology on nuclear power plant high-energy piping

International Nuclear Information System (INIS)

Li Chengliang; Deng Xiaoyun; Yin Zhiying; Liu Meng

2012-01-01

The application of leak-before-break (LBB) technology on nuclear power plant high-energy piping systems can improve their safety and economy, while propose some new requirements on testing material properties. The U.S. Nuclear Regulatory Commission's LBB related standard review plan and implementation specifications were analyzed, and test items, object, temperature, quantity and thermal aging effect of five general requirements were summarized. In addition, four key testing technical requirements, such as specimen size, side grooves, strain range and the orientation of specimens were also discussed to ensure the test data usefulness, representativeness and integrity. This study can provide some guidance for the aforementioned test program on domestic materials. (authors)

Time-reversal symmetry breaking in quantum billiards

Energy Technology Data Exchange (ETDEWEB)

Schaefer, Florian

2009-01-26

The present doctoral thesis describes experimentally measured properties of the resonance spectra of flat microwave billiards with partially broken timereversal invariance induced by an embedded magnetized ferrite. A vector network analyzer determines the complex scattering matrix elements. The data is interpreted in terms of the scattering formalism developed in nuclear physics. At low excitation frequencies the scattering matrix displays isolated resonances. At these the effect of the ferrite on isolated resonances (singlets) and pairs of nearly degenerate resonances (doublets) is investigated. The hallmark of time-reversal symmetry breaking is the violation of reciprocity, i.e. of the symmetry of the scattering matrix. One finds that reciprocity holds in singlets; it is violated in doublets. This is modeled by an effective Hamiltonian of the resonator. A comparison of the model to the data yields time-reversal symmetry breaking matrix elements in the order of the level spacing. Their dependence on the magnetization of the ferrite is understood in terms of its magnetic properties. At higher excitation frequencies the resonances overlap and the scattering matrix elements fluctuate irregularly (Ericson fluctuations). They are analyzed in terms of correlation functions. The data are compared to three models based on random matrix theory. The model by Verbaarschot, Weidenmueller and Zirnbauer describes time-reversal invariant scattering processes. The one by Fyodorov, Savin and Sommers achieves the same for systems with complete time-reversal symmetry breaking. An extended model has been developed that accounts for partial breaking of time-reversal invariance. This extended model is in general agreement with the data, while the applicability of the other two models is limited. The cross-correlation function between forward and backward reactions determines the time-reversal symmetry breaking matrix elements of the Hamiltonian to up to 0.3 mean level spacings. Finally

Time-reversal symmetry breaking in quantum billiards

International Nuclear Information System (INIS)

Schaefer, Florian

2009-01-01

The present doctoral thesis describes experimentally measured properties of the resonance spectra of flat microwave billiards with partially broken timereversal invariance induced by an embedded magnetized ferrite. A vector network analyzer determines the complex scattering matrix elements. The data is interpreted in terms of the scattering formalism developed in nuclear physics. At low excitation frequencies the scattering matrix displays isolated resonances. At these the effect of the ferrite on isolated resonances (singlets) and pairs of nearly degenerate resonances (doublets) is investigated. The hallmark of time-reversal symmetry breaking is the violation of reciprocity, i.e. of the symmetry of the scattering matrix. One finds that reciprocity holds in singlets; it is violated in doublets. This is modeled by an effective Hamiltonian of the resonator. A comparison of the model to the data yields time-reversal symmetry breaking matrix elements in the order of the level spacing. Their dependence on the magnetization of the ferrite is understood in terms of its magnetic properties. At higher excitation frequencies the resonances overlap and the scattering matrix elements fluctuate irregularly (Ericson fluctuations). They are analyzed in terms of correlation functions. The data are compared to three models based on random matrix theory. The model by Verbaarschot, Weidenmueller and Zirnbauer describes time-reversal invariant scattering processes. The one by Fyodorov, Savin and Sommers achieves the same for systems with complete time-reversal symmetry breaking. An extended model has been developed that accounts for partial breaking of time-reversal invariance. This extended model is in general agreement with the data, while the applicability of the other two models is limited. The cross-correlation function between forward and backward reactions determines the time-reversal symmetry breaking matrix elements of the Hamiltonian to up to 0.3 mean level spacings. Finally

Modification Of Coffe Fruits Breaking Machine Two Cylinder Type With Capacity 700 Kg Jam

Directory of Open Access Journals (Sweden)

M.C. Tri Atmodjo

2017-08-01

Full Text Available Modification of a tool is an early activity of the business development of a product that is needed by the community. In this case wants a tool or breaking machine to improve the production of fast precise and efficient. Because there are still many farmers who use single cylindrical coffee-breaking machine even most still use traditional or manual way. The purpose of this research is to modify the simple two-cylinder wet coffee breaking tool so that it can be easily applied in the community especially to small and medium-sized coffee of farmers in rural areas and to improve the production result in order to achieve the appropriate result both in the work and quality. . From the calculation of the machine obtained high dimension 1200 mm width 450 mm and length 600 mm. With the material characteristics are Sheet plate Shaft Iron frame Cylindrical breaker Bearing Pulley Belt and gasoline engine 6.5 HP. The results of this machine operation is a coffee fruit that has been broken with a capacity of 800 kg hour.

Raman Imaging Techniques and Applications

CERN Document Server

2012-01-01

Raman imaging has long been used to probe the chemical nature of a sample, providing information on molecular orientation, symmetry and structure with sub-micron spatial resolution. Recent technical developments have pushed the limits of micro-Raman microscopy, enabling the acquisition of Raman spectra with unprecedented speed, and opening a pathway to fast chemical imaging for many applications from material science and semiconductors to pharmaceutical drug development and cell biology, and even art and forensic science. The promise of tip-enhanced raman spectroscopy (TERS) and near-field techniques is pushing the envelope even further by breaking the limit of diffraction and enabling nano-Raman microscopy.

Fast Demand Forecast of Electric Vehicle Charging Stations for Cell Phone Application

Energy Technology Data Exchange (ETDEWEB)

Majidpour, Mostafa; Qiu, Charlie; Chung, Ching-Yen; Chu, Peter; Gadh, Rajit; Pota, Hemanshu R.

2014-07-31

This paper describes the core cellphone application algorithm which has been implemented for the prediction of energy consumption at Electric Vehicle (EV) Charging Stations at UCLA. For this interactive user application, the total time of accessing database, processing the data and making the prediction, needs to be within a few seconds. We analyze four relatively fast Machine Learning based time series prediction algorithms for our prediction engine: Historical Average, kNearest Neighbor, Weighted k-Nearest Neighbor, and Lazy Learning. The Nearest Neighbor algorithm (k Nearest Neighbor with k=1) shows better performance and is selected to be the prediction algorithm implemented for the cellphone application. Two applications have been designed on top of the prediction algorithm: one predicts the expected available energy at the station and the other one predicts the expected charging finishing time. The total time, including accessing the database, data processing, and prediction is about one second for both applications.

Evaluation and application of a fast module in a PLC based interlock and control system

International Nuclear Information System (INIS)

Zaera-Sanz, M

2009-01-01

The LHC Beam Interlock system requires a controller performing a simple matrix function to collect the different beam dump requests. To satisfy the expected safety level of the Interlock, the system should be robust and reliable. The PLC is a promising candidate to fulfil both aspects but too slow to meet the expected response time which is of the order of μseconds. Siemens has introduced a 'so called' fast module (FM352-5 Boolean Processor). It provides independent and extremely fast control of a process within a larger control system using an onboard processor, a Field Programmable Gate Array (FPGA), to execute code in parallel which results in extremely fast scan times. It is interesting to investigate its features and to evaluate it as a possible candidate for the beam interlock system. This paper publishes the results of this study. As well, this paper could be useful for other applications requiring fast processing using a PLC.

The leak before break criteria, requirements and implications

International Nuclear Information System (INIS)

Martinez M, E.

1992-05-01

Inside this work a general balance is made on the Leak before break approach (LBB), like they are the history and licensing, those limitations, the acceptance criteria of the LBB, the current state of the regulatory development and the current state of it application in countries like E.U.A, Germany, Canada, Italy and France. Everything it with the purpose of evaluating the opportunities that offers the LBB criteria for it possible application in Mexico. (Author)

Rf structure of superconducting cyclotron for therapy application

International Nuclear Information System (INIS)

Takekoshi, Hidekuni; Matsuki, Seishi; Mashiko, Katuo; Shikazono, Naomoto.

1981-01-01

Advantages of fast neutrons in therapeutical application are now widely recognized. Fast neutrons are generated by bombarding a thick beryllium target with high energy protons and deuterons. The AVF cyclotrons which deliver 50 MeV protons and 25 MeV deuterons are commonly used and are commercially available now. At the treatment usually rotational irradiation is taken to prevent an injury to normal tissue from the high LET effect of fast neutrons. The construction cost of both cyclotrons and isocentric irradiation installation are relatively high, so that the spread of neutron therapy is obstructed. A superconducting cyclotron for neutron therapy application was proposed by a Chalk River group. This low cost design allows the installation to be a dedicated facility located in a hospital, and small size allows installations of the complete cyclotron in a rotatable gantry. The design studies of the superconducting cyclotron based on this idea are going on at Kyoto University. The full scale model experiments for a rf structure of the cyclotron were carried out. (author)

Direct-Current Forced Interruption and Breaking Performance of Spiral-Type Contacts in Aero Applications

Directory of Open Access Journals (Sweden)

Wenlei Huo

2017-05-01

Full Text Available This paper analyses the transient characteristics and breaking performance of direct-current (DC forced-interruption vacuum interrupters in 270 V power-supply systems. Three stages are identified in forced interruption: the DC-arcing stage, current-commutation stage, and voltage-recovery stage. During the current-commutation stage, the reverse peak-current coefficient k, which is a key design factor, is used to calculate the rate of current at zero-crossing (di/dt. MATLAB/Simulink simulation models are established to obtain the transient characteristics influenced by the forced-commutation branch parameters and the coefficient k. To study the breaking performance of spiral-type contacts, experiments are conducted for different contact materials and arcing times for currents less than 3.5 kA. During the DC-arcing stage, a locally intensive burning arc is observed in the CuW80 contact; however, it is not observed in the CuCr50 contact. On examining the re-ignition interruption results of the CuW80 contact, the intensive burning arc is found to be positioned within a possible re-ignition region. When the arcing time is longer than 1 ms, the intensive burning arc occurs and affects the breaking performance of the spiral-type contacts. If the DC-arcing stage is prolonged, the total arcing energy increases, which leads to a lower breaking capacity.

Qinshan NPP large break LOCA safety analysis

International Nuclear Information System (INIS)

Shi Guobao; Tang Jiahuan; Zhou Quanfu; Wang Yangding

1997-01-01

Qinshan NPP is the first nuclear power plant in the mainland of China, a 300 MW(e) two-loop PWR. Large break LOCA is the design-basis accident of Qinshan NPP. Based on available computer codes, the own analysis method which complies with Appendix k of 10 CFR 50 has been established. The RELAP4/MOD7 code is employed for the calculations of blowdown, refill and reflood phase of the RCS respectively. The CONTEMPT-LT/028 code is used for the containment pressure and temperature analysis. The temperature transient in the hot rod is calculated using the FRAP-6T code. Conservative initial and functional assumptions were adopted during Qinshan NPP large break LOCA analysis. The results of the analysis show the applicable acceptance criteria for the loss-of-coolant accident are met

Numerical simulation and analysis of axial instabilities occurrence and development in turbomachines. Application to a break transient in a helium nuclear reactor

International Nuclear Information System (INIS)

Tauveron, N.

2006-02-01

The subject of the present work was to develop models able to simulate axial instabilities occurrence and development in multistage turbomachines. The construction of a 1D unsteady axisymmetric model of internal flow in a turbomachine (at the scale of the row) has followed different steps: generation of steady correlations, adapted to different regimes (off-design conditions, low mass flowrate, negative mass flow rate); building of a model able to describe transient behaviour; use of implicit time schemes adapted to long transients; validation of the model in comparison of experimental investigations, measurements and numerical results from the bibliography. This model is integrated in a numerical tool, which has the capacity to describe the gas dynamics in a complete circuit containing different elements (ducts, valves, plenums). Thus, the complete model can represent the coupling between local and global phenomena, which is a very important mechanism in axial instability occurrence and development. An elementary theory has also been developed, based on a generalisation of Greitzer's model. These models, which were validated on various configurations, have provided complementary elements for the validation of the complete model. They have also allowed a more comprehensive description of physical phenomena at stake in instability occurrence and development by quantifying various effects (inertia, compressibility, performance levels) and underlying the main phenomena (in particular the collapse and recovery kinetics of the plenum), which were the only retained in the final elementary theory. The models were first applied to academic configurations (compression system), and then to an innovative industrial project: a helium cooled fast nuclear reactor with a Brayton cycle. The use of the models have brought comprehensive elements to surge occurrence due to a break event. It has been shown that surge occurrence is highly dependent of break location and that surge

Development and application of modeling tools for sodium fast reactor inspection

Energy Technology Data Exchange (ETDEWEB)

Le Bourdais, Florian; Marchand, Benoît; Baronian, Vahan [CEA LIST, Centre de Saclay F-91191 Gif-sur-Yvette (France)

2014-02-18

To support the development of in-service inspection methods for the Advanced Sodium Test Reactor for Industrial Demonstration (ASTRID) project led by the French Atomic Energy Commission (CEA), several tools that allow situations specific to Sodium cooled Fast Reactors (SFR) to be modeled have been implemented in the CIVA software and exploited. This paper details specific applications and results obtained. For instance, a new specular reflection model allows the calculation of complex echoes from scattering structures inside the reactor vessel. EMAT transducer simulation models have been implemented to develop new transducers for sodium visualization and imaging. Guided wave analysis tools have been developed to permit defect detection in the vessel shell. Application examples and comparisons with experimental data are presented.

Preliminary Assessment of PHTS Pump Piping Break Accident of DSFR-600

Energy Technology Data Exchange (ETDEWEB)

Shin, Andong; Bae, Moohoon; Choi, Yongwon; Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2013-05-15

KINS is evaluating the applicability of TRACE code for safety analysis of SFR Since 2012. Based on the steady-state input deck for Demonstration Sodium Cooled Fast Reactor 600MW (DSFR-600) component-wise specific modeling is developed for DSFR-600. Preliminary analysis was performed with TRACE code for DSFR-600 PHTS pump piping break accident. The calculation result showed that the calculated safety parameters are conforms to the design criteria for DBA accidents. RHRS design of DSFR-600 and its performance during transient was also reviewed by sensitivity study on the effect of sodium condition to the transient decay heat removal capability of RHRS. Following insights are identified. These should be considered in improving the design also in licensing review of SFR safety analysis. The transient performance of RHRS might differ from the component's design capacity. RHRS's transient performance also should be included in the design documents and validated with reasonable test and/or analysis with consideration of the variation of coolant conditions during transient. The analytic model used for safety analysis should consider 3-D effect of vessel pool and its uncertainty with reasonable conservatism.

cricket: nature and incidence of fast-bowling injuries at an elite ...

African Journals Online (AJOL)

. T3. TT. Fig. 1. Seasonal injury incidence per anatomical area. 0. 5. 10. 15. 20. 25. 30. 35. 40. 45. 50 strain other sprain tear fracture bruise break dislocation. T1. T2. T3. TT. Fig. 2. The nature of injuries to fast bowlers. saJsM Vol 20 no. 2 2008.

Application of objective provision tree to development of standard review plan for sodium-cooled fast reactor nuclear design

Energy Technology Data Exchange (ETDEWEB)

Bae, Moo-Hoon; Suh, Namduk; Choi, Yongwon; Shin, Andong [Korea Institute of Nuclear Safety, Daejon (Korea, Republic of)

2016-06-15

A systematic methodology was developed for the standard review plan for sodium-cooled fast reactor nuclear design. The process is first to develop an objective provision tree of sodium-cooled fast reactor for the reactivity control safety function. The provision tree is generally developed by designer to confirm whether the design satisfies the defense-in-depth concept. Then applicability of the current standard review plan of nuclear design for light water reactor to sodium-cooled fast reactor was evaluated and complemented by the developed objective provision tree.

Sistem Gesture Accelerometer dengan Metode Fast Dynamic Time Warping (FastDTW

Directory of Open Access Journals (Sweden)

Sam Farisa Chaerul Haviana

2016-01-01

Full Text Available In the modern environment, the interaction between humans and computers require a more natural form of interaction. Therefore, it is important to be able to build a system that can meet these demands, such as by building a hand gesture recognition system or gesture to create a more natural form of interaction. This study aims to design a smartphone’s accelerometer gesture system as human computer interaction interfaces using FastDTW (Fast Dynamic Time Warping.The result of this study is form of gesture interaction which implemented in a system that can make the process of recognition of the human hand movements based on a smartphone accelerometer which generates a command to run the media player application functions as a case study. FastDTW as the development of Dynamic Time Warping method (DTW is able to compute faster than DTW and have an accuracy approaching DTW. From the test results, FastDTW show a fairly high degree of accuracy reached 86% and showed a better computing speed compared to DTW   Keywords: Human and Computer Interaction, Accelerometer-based gesture, FastDTW, Media player application function

An Overall Investigation of Direct Vessel Injection Line Break Accidents of the ATLAS Facility

International Nuclear Information System (INIS)

Kim, Yeon-Sik; Choi, Ki-Yong; Cho, Seok; Kim, Bok-Deuk

2015-01-01

For parametric evaluations of direct vessel injection (DVI) line break scenarios, the pressurizer (PZR) pressure, core collapsed water level, and peak cladding temperature were investigated between the analyses and tests. The PZR pressure was mainly dependent upon the break flow model, e.g., discharge coefficient of the Henry-Fauske critical model. The core collapsed water level and peak cladding temperature were mainly dependent on the counter-current flow limit (CCFL) option of the fuel alignment plate (FAP). The CCFL option of the cross-over leg (COL) affected the PZR pressure owing to the loop seal clearings and seemed to have little effect on the core collapsed water level. Proper C d values and applicable CCFL options were summarized. C d values seemed to be dependent on the sizes of the DVI line break. The PZR pressure was mainly dependent on the break flow model, e.g., the discharge coefficient of the Henry-Fauske critical model. The core collapsed water level and peak cladding temperature were mainly dependent on the CCFL option of the FAP. The CCFL option of the COL affected the PZR pressure owing to loop seal clearings and seemed to have little effect on the core collapsed water level. From parametric evaluations, proper C d values and applicable CCFL options were suggested. The C d values seemed to be dependent on the sizes of the DVI line break. Although there was little difference in the CCFL options of the COL, the Ku-option was the preferred one for COLs' CCFL option. The CCFL options of the FAP appeared sensitive to the core collapsed water level and peak cladding temperature. The Ku-option of the FAP tended to negatively exaggerate the core behavior and showed excessively conservative results, especially on the peak cladding temperature. For smaller breaks, e.g., 25%, NA- and Wa-options would be applicable for the FAP. However, for larger breaks, e.g., 50%, the Wa-option of the FAP was the preferred one. Comparisons between the tests and

Bubbles and breaking waves

Science.gov (United States)

Thorpe, S. A.

1980-01-01

The physical processes which control the transfer of gases between the atmosphere and oceans or lakes are poorly understood. Clouds of micro-bubbles have been detected below the surface of Loch Ness when the wind is strong enough to cause the waves to break. The rate of transfer of gas into solution from these bubbles is estimated to be significant if repeated on a global scale. We present here further evidence that the bubbles are caused by breaking waves, and discuss the relationship between the mean frequency of wave breaking at a fixed point and the average distance between breaking waves, as might be estimated from an aerial photograph.

Associations between prolonged sedentary time and breaks in sedentary time with cardiometabolic risk in 10-14-year-old children: The HAPPY study.

Science.gov (United States)

Bailey, Daniel P; Charman, Sarah J; Ploetz, Thomas; Savory, Louise A; Kerr, Catherine J

2017-11-01

This study examines the association between prolonged sedentary time and breaks in sedentary time with cardiometabolic risk in 10-14-year-old children. This cross-sectional design study analysed accelerometry-determined sedentary behaviour and physical activity collected over 7 days from 111 (66 girls) UK schoolchildren. Objective outcome measures included waist circumference, fasting lipids, fasting glucose, blood pressure, and cardiorespiratory fitness. Logistic regression was used for the main data analysis. After adjustment for confounders, the odds of having hypertriglyceridaemia (P = 0.03) and an increased clustered cardiometabolic risk score (P = 0.05) were significantly higher in children who engaged in more prolonged sedentary bouts per day. The number of breaks in sedentary time per day was not associated with any cardiometabolic risk factor, but longer mean duration of daily breaks in sedentary time were associated with a lower odds of having abdominal adiposity (P = 0.04) and elevated diastolic blood pressure (P = 0.01). These associations may be mediated by engagement in light activity. This study provides evidence that avoiding periods of prolonged uninterrupted sedentary time may be important for reducing cardiometabolic disease risk in children.

Associations of sedentary behavior, sedentary bouts and breaks in sedentary time with cardiometabolic risk in children with a family history of obesity.

Science.gov (United States)

Saunders, Travis John; Tremblay, Mark Stephen; Mathieu, Marie-Ève; Henderson, Mélanie; O'Loughlin, Jennifer; Tremblay, Angelo; Chaput, Jean-Philippe

2013-01-01

Although reports in adults suggest that breaks in sedentary time are associated with reduced cardiometabolic risk, these findings have yet to be replicated in children. To investigate whether objectively measured sedentary behavior, sedentary bouts or breaks in sedentary time are independently associated with cardiometabolic risk in a cohort of Canadian children aged 8-11 years with a family history of obesity. Data from 286 boys and 236 girls living in Quebec, Canada, with at least one biological parent with obesity (QUALITY cohort) were collected from 2005-2008, and analyzed in 2013. Sedentary behavior, light and moderate-to-vigorous physical activity were measured over 7 days using accelerometry. Leisure time computer/video game use and TV viewing over the past 7 days were self-reported. Outcomes included waist circumference, body mass index Z-score, fasting insulin, fasting glucose, triglycerides, HDL-cholesterol, C-reactive protein and a continuous cardiometabolic risk score. After adjustment for confounders, breaks in sedentary time and the number of sedentary bouts lasting 1-4 minutes were associated with reduced cardiometabolic risk score and lower BMI Z-score in both sexes (all pfasting glucose in girls, and with BMI Z-score in boys (all pobesity.

Advance of Mechanically Controllable Break Junction for Molecular Electronics.

Science.gov (United States)

Wang, Lu; Wang, Ling; Zhang, Lei; Xiang, Dong

2017-06-01

Molecular electronics stands for the ultimate size of functional elements, keeping up with an unstoppable trend over the past few decades. As a vital component of molecular electronics, single molecular junctions have attracted significant attention from research groups all over the world. Due to its pronounced superiority, the mechanically controllable break junctions (MCBJ) technique has been widely applied to characterize the dynamic performance of single molecular junctions. This review presents a system analysis for single-molecule junctions and offers an overview of four test-beds for single-molecule junctions, thus offering more insight into the mechanisms of electron transport. We mainly focus on the development of state-of-the-art mechanically controlled break junctions. The three-terminal gated MCBJ approaches are introduced to manipulate the electron transport of molecules, and MCBJs are combined with characterization techniques. Additionally, applications of MCBJs and remarkable properties of single molecules are addressed. Finally, the challenges and perspective for the mechanically controllable break junctions technique are provided.

Analysis of native cellular DNA after heavy ion irradiation: DNA double-strand breaks in CHO-K1 cells

International Nuclear Information System (INIS)

Heilmann, J.; Taucher-Scholz, G.; Kraft, G.

1994-11-01

A fast assay for the detection of DNA double-strand breaks was developed involving constant field gel electrophoresis (Taucher-Scholz et al., 1994) and densitometric scanning of agarose gels stained with ethidium bromide. With this technique, DSB induction was investigated after irradiation of CHO cells with carbon ions with LET values between 14 keV/μm and 400 keV/μm. In parallel, a computer code was developed to simulate both the principle of the electrophoretic detection of DNA double-strand breaks and the action of radiations of different ionization density. The results of the experiments and the calculations are presented here and compared with each other. (orig./HSI)

Fast and Adaptive Lossless On-Board Hyperspectral Data Compression System for Space Applications

Science.gov (United States)

Aranki, Nazeeh; Bakhshi, Alireza; Keymeulen, Didier; Klimesh, Matthew

2009-01-01

Efficient on-board lossless hyperspectral data compression reduces the data volume necessary to meet NASA and DoD limited downlink capabilities. The techniques also improves signature extraction, object recognition and feature classification capabilities by providing exact reconstructed data on constrained downlink resources. At JPL a novel, adaptive and predictive technique for lossless compression of hyperspectral data was recently developed. This technique uses an adaptive filtering method and achieves a combination of low complexity and compression effectiveness that far exceeds state-of-the-art techniques currently in use. The JPL-developed 'Fast Lossless' algorithm requires no training data or other specific information about the nature of the spectral bands for a fixed instrument dynamic range. It is of low computational complexity and thus well-suited for implementation in hardware, which makes it practical for flight implementations of pushbroom instruments. A prototype of the compressor (and decompressor) of the algorithm is available in software, but this implementation may not meet speed and real-time requirements of some space applications. Hardware acceleration provides performance improvements of 10x-100x vs. the software implementation (about 1M samples/sec on a Pentium IV machine). This paper describes a hardware implementation of the JPL-developed 'Fast Lossless' compression algorithm on a Field Programmable Gate Array (FPGA). The FPGA implementation targets the current state of the art FPGAs (Xilinx Virtex IV and V families) and compresses one sample every clock cycle to provide a fast and practical real-time solution for Space applications.

Anatomy of new SUSY breaking holographic RG flows

Energy Technology Data Exchange (ETDEWEB)

Argurio, Riccardo [Physique Théorique et Mathématique andInternational Solvay Institutes, Université Libre de Bruxelles,C.P. 231, 1050 Brussels (Belgium); Musso, Daniele [International Center of Theoretical Physics (ICTP),Strada Costiera 11, I 34014 Trieste (Italy); Redigolo, Diego [Physique Théorique et Mathématique andInternational Solvay Institutes, Université Libre de Bruxelles,C.P. 231, 1050 Brussels (Belgium); Sorbonne Universités, UPMC University Paris 06, UMR 7589, LPTHE,F-75005, Paris (France); CNRS, UMR 7589, LPTHE,F-75005, Paris (France)

2015-03-17

We find and thoroughly study new supergravity domain wall solutions which are holographic realizations of supersymmetry breaking strongly coupled gauge theories. We set ourselves in an N=2 gauged supergravity with a minimal content in order to reproduce a dual N=1 effective SCFT which has a U(1){sub R} symmetry, a chiral operator whose components are responsible for triggering the RG flow, and an additional U(1){sub F} symmetry. We present a full three dimensional parameter space of solutions, which generically break supersymmetry. Some known solutions are recovered for specific sets of values of the parameters, with the new solutions interpolating between them. The generic backgrounds being singular, we provide a stability test of their dual theories by showing that there are no tachyonic resonances in the two point correlators. We compute the latter by holographic renormalization. We also carefully analyze the appearance of massless modes, such as the dilaton and the R axion, when the respective symmetries are spontaneously broken, and their lifting when the breaking is explicit. We further comment on the application of such class of backgrounds as archetypes of strongly coupled hidden sectors for gauge mediation of supersymmetry breaking. In particular, we show that it is possible to model in this way all types of hierarchies between the visible sector gaugino and sfermion masses.

A model of intrinsic symmetry breaking

International Nuclear Information System (INIS)

Ge, Li; Li, Sheng; George, Thomas F.; Sun, Xin

2013-01-01

Different from the symmetry breaking associated with a phase transition, which occurs when the controlling parameter is manipulated across a critical point, the symmetry breaking presented in this Letter does not need parameter manipulation. Instead, the system itself suddenly undergoes symmetry breaking at a certain time during its evolution, which is intrinsic symmetry breaking. Through a polymer model, it is revealed that the origin of the intrinsic symmetry breaking is nonlinearity, which produces instability at the instance when the evolution crosses an inflexion point, where this instability breaks the original symmetry

Additional requirements for leak-before-break application to primary coolant piping in Belgium

Energy Technology Data Exchange (ETDEWEB)

Roussel, G. [AIB Vincotte Nuclear, Brussels (Belgium)

1997-04-01

Leak-Before-Break (LBB) technology has not been applied in the first design of the seven Pressurized Water Reactors the Belgian utility is currently operating. The design basis of these plants required to consider the dynamic effects associated with the ruptures to be postulated in the high energy piping. The application of the LBB technology to the existing plants has been recently approved by the Belgian Safety Authorities but with a limitation to the primary coolant loop. LBB analysis has been initiated for the Doel 3 and Tihange 2 plants to allow the withdrawal of some of the reactor coolant pump snubbers at both plants and not reinstall some of the restraints after steam generator replacement at Doel 3. LBB analysis was also found beneficial to demonstrate the acceptability of the primary components and piping to the new conditions resulting from power uprating and stretch-out operation. LBB analysis has been subsequently performed on the primary coolant loop of the Tihange I plant and is currently being performed for the Doel 4 plant. Application of the LBB to the primary coolant loop is based in Belgium on the U.S. Nuclear Regulatory Commission requirements. However the Belgian Safety Authorities required some additional analyses and put some restrictions on the benefits of the LBB analysis to maintain the global safety of the plant at a sufficient level. This paper develops the main steps of the safety evaluation performed by the Belgian Safety Authorities for accepting the application of the LBB technology to existing plants and summarizes the requirements asked for in addition to the U.S. Nuclear Regulatory Commission rules.

Confinement/deconfinement transition from symmetry breaking in gauge/gravity duality

Energy Technology Data Exchange (ETDEWEB)

Čubrović, Mihailo [Institute for Theoretical Physics, University of Cologne,Zülpicher Strasse 77, D-50937, Cologne (Germany)

2016-10-19

We study the confinement/deconfinement transition in a strongly coupled system triggered by an independent symmetry-breaking quantum phase transition in gauge/gravity duality. The gravity dual is an Einstein-scalar-dilaton system with AdS near-boundary behavior and soft wall interior at zero scalar condensate. We study the cases of neutral and charged condensate separately. In the former case the condensation breaks the discrete ℤ{sub 2} symmetry while a charged condensate breaks the continuous U(1) symmetry. After the condensation of the order parameter, the non-zero vacuum expectation value of the scalar couples to the dilaton, changing the soft wall geometry into a non-confining and anisotropically scale-invariant infrared metric. In other words, the formation of long-range order is immediately followed by the deconfinement transition and the two critical points coincide. The confined phase has a scale — the confinement scale (energy gap) which vanishes in the deconfined case. Therefore, the breaking of the symmetry of the scalar (ℤ{sub 2} or U(1)) in turn restores the scaling symmetry in the system and neither phase has a higher overall symmetry than the other. When the scalar is charged the phase transition is continuous which goes against the Ginzburg-Landau theory where such transitions generically only occur discontinuously. This phenomenon has some commonalities with the scenario of deconfined criticality. The mechanism we have found has applications mainly in effective field theories such as quantum magnetic systems. We briefly discuss these applications and the relation to real-world systems.

Note on moduli stabilization, supersymmetry breaking and axiverse

Energy Technology Data Exchange (ETDEWEB)

Higaki, Tetsutaro [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Kobayashi, Tatsuo [Kyoto Univ. (Japan). Dept. of Physics

2011-06-15

We study properties of moduli stabilization in the four dimensional N=1 supergravity theory with heavy moduli and would-be saxion-axion multiplets including light string-theoretic axions. We give general formulation for the scenario that heavy moduli and saxions are stabilized while axions remain light, assuming that moduli are stabilized near the supersymmetric solution. One can find stable vacuum, i.e. nontachyonic saxions, in the non-supersymmetric Minkowski vacua. We also discuss the cases, where the moduli are coupled to the supersymmetry breaking sector and/or moduli have contributions to supersymmetry breaking. Furthermore we study the models with axions originating from matter-like fields. Our analysis on moduli stabilization is applicable even if there are not light axion multiplets. (orig.)

Clinical applications of fast liquid chromatography: a review on the analysis of cardiovascular drugs and their metabolites.

Science.gov (United States)

Baranowska, Irena; Magiera, Sylwia; Baranowski, Jacek

2013-05-15

One of the major challenges facing the medicine today is developing new therapies that enhance human health. To help address these challenges the utilization of analytical technologies and high-throughput automated platforms has been employed; in order to perform more experiments in a shorter time frame with increased data quality. In the last decade various analytical strategies have been established to enhance separation speed and efficiency in liquid chromatography applications. Liquid chromatography is an increasingly important tool for monitoring drugs and their metabolites. Furthermore, liquid chromatography has played an important role in pharmacokinetics and metabolism studies at these drug development stages since its introduction. This paper provides an overview of current trends in fast chromatography for the analysis of cardiovascular drugs and their metabolites in clinical applications. Current trends in fast liquid chromatographic separations involve monolith technologies, fused-core columns, high-temperature liquid chromatography (HTLC) and ultra-high performance liquid chromatography (UHPLC). The high specificity in combination with high sensitivity makes it an attractive complementary method to traditional methodology used for routine applications. The practical aspects of, recent developments in and the present status of fast chromatography for the analysis of biological fluids for therapeutic drug and metabolite monitoring, pharmacokinetic studies and bioequivalence studies are presented. Copyright © 2013 Elsevier B.V. All rights reserved.

RF heating and current drive on NSTX with high harmonic fast waves

International Nuclear Information System (INIS)

Ryan, P.M.

2002-01-01

NSTX is a small aspect ratio tokamak with a large dielectric constant (50-100); under these conditions high harmonic fast waves (HHFW) will readily damp on electrons via Landau damping and TTMP. The HHFW system is a 30 MHz, 12-element array capable of launching both symmetric and directional wave spectra for plasma heating and non-inductive current drive. It has delivered up to 6 MW for short pulses and has routinely operated at ∼3-4 MW for 100-200 ms pulses. Results include strong, centrally-peaked electron heating in both D and He plasmas, for both high and low phase velocity spectra. H-modes were obtained with application of HHFW power alone, with stored energy doubling after the L-H transition. Beta poloidal as large as unity has been obtained with large fractions (0.4) of bootstrap current. A fast ion tail with energies extending up to 140 keV has been observed when HHFW interacts with 80 keV neutral beams; neutron rate and lost ion measurements, as well as modeling, indicate significant power absorption by the fast ions. Radial power deposition profiles are being calculated with ray tracing and kinetic full-wave codes and benchmarked against measurements. (author)

Post-test analysis of semiscale large-break test S-06-3 using TRAC-PF1

International Nuclear Information System (INIS)

Boyack, B.E.

1982-01-01

The Transient Reactor Analysis Code (TRAC) is an advanced systems code for light-water-reactor accident analysis. The code was developed originally to analyze large-break loss-of-coolant accidents (LOCAs) and running time was not a primary development criterion. TRAC-PF1 was developed because increased application of the code to long transients such as small-break LOCAs required a faster-running code version. Although developed for long transients, its performance on large-break transients is still important. This paper assesses the ability of TRAC-PF1 to predict large-break-LOCA Test S-06-3 conducted in the Semiscale Mod-1 facility

The Influence of Slope Breaks on Lava Flow Surface Disruption

Science.gov (United States)

Glaze, Lori S.; Baloga, Stephen M.; Fagents, Sarah A.; Wright, Robert

2014-01-01

Changes in the underlying slope of a lava flow impart a significant fraction of rotational energy beyond the slope break. The eddies, circulation and vortices caused by this rotational energy can disrupt the flow surface, having a significant impact on heat loss and thus the distance the flow can travel. A basic mechanics model is used to compute the rotational energy caused by a slope change. The gain in rotational energy is deposited into an eddy of radius R whose energy is dissipated as it travels downstream. A model of eddy friction with the ambient lava is used to compute the time-rate of energy dissipation. The key parameter of the dissipation rate is shown to be rho R(sup 2/)mu, where ? is the lava density and mu is the viscosity, which can vary by orders of magnitude for different flows. The potential spatial disruption of the lava flow surface is investigated by introducing steady-state models for the main flow beyond the steepening slope break. One model applies to slow-moving flows with both gravity and pressure as the driving forces. The other model applies to fast-moving, low-viscosity, turbulent flows. These models provide the flow velocity that establishes the downstream transport distance of disrupting eddies before they dissipate. The potential influence of slope breaks is discussed in connection with field studies of lava flows from the 1801 Hualalai and 1823 Keaiwa Kilauea, Hawaii, and 2004 Etna eruptions.

Dynamics of Symmetry Breaking and Tachyonic Preheating

CERN Document Server

Felder, G; Greene, P B; Kofman, L A; Linde, Andrei D; Tkachev, Igor I; Felder, Gary; Garcia-Bellido, Juan; Greene, Patrick B.; Kofman, Lev; Linde, Andrei; Tkachev, Igor

2001-01-01

We reconsider the old problem of the dynamics of spontaneous symmetry breaking using 3d lattice simulations, and develop a theory of tachyonic preheating, which occurs due to the spinodal instability of the scalar field. Tachyonic preheating is so efficient that symmetry breaking typically completes within a single oscillation of the field distribution as it rolls towards the minimum of its effective potential. As an application of this theory we consider preheating in the hybrid inflation scenario, including SUSY-motivated F-term and D-term inflationary models. We show that preheating in hybrid inflation is typically tachyonic and the stage of oscillations of a homogeneous component of the scalar fields driving inflation ends after a single oscillation. Our results may also be relevant for the theory of the formation of disoriented chiral condensates in heavy ion collisions.

Performance evaluation of novel LaBr{sub 3}(Ce) scintillator geometries for fast-timing applications

Energy Technology Data Exchange (ETDEWEB)

Vedia, V., E-mail: mv.vedia@ucm.es [Grupo de Física Nuclear, Facultad de CC. Físicas, Universidad Complutense, CEI Moncloa, 28040 Madrid (Spain); Carmona-Gallardo, M.; Fraile, L.M. [Grupo de Física Nuclear, Facultad de CC. Físicas, Universidad Complutense, CEI Moncloa, 28040 Madrid (Spain); Mach, H. [Grupo de Física Nuclear, Facultad de CC. Físicas, Universidad Complutense, CEI Moncloa, 28040 Madrid (Spain); National Centre for Nuclear Research, Division for Nuclear Physics, BP1, Warsaw (Poland); Udías, J.M. [Grupo de Física Nuclear, Facultad de CC. Físicas, Universidad Complutense, CEI Moncloa, 28040 Madrid (Spain)

2017-06-11

We evaluate the performance of two LaBr{sub 3}(Ce) crystals that were produced with special geometries, aimed at enhancing the scintillation light collection and thus the time resolution. Their design was motivated by the construction of high-performance fast-timing arrays like the FAst TIMing array for DESPEC (FATIMA), which demands a high packing factor in addition to good time and energy resolutions. Energy resolution and efficiency were measured using standard calibration sources. Timing measurements were performed at {sup 60}Co and {sup 22}Na γ-energies against a fast BaF{sub 2} reference detector. The time resolution was optimized by the choice of the photomultiplier bias voltage and the fine tuning of the constant fraction discriminator parameters. Monte Carlo simulations using the Geant4 toolkit were performed in order to achieve a better understanding of how the new geometries affect the light transport and thus the performance of the crystals. It is found that the conical-shaped LaBr{sub 3}(Ce) crystals are optimal for fast-timing applications and for the construction of arrays such as FATIMA.

Pair breaking and charge relaxation in superconductors

International Nuclear Information System (INIS)

Nielson, J.B.; Pethick, C.J.; Rammer, J.; Smith, H.

1982-01-01

We present a general formalism based on the quasiclassical Green's function for calculating charge imbalance in nonequilibrium superconductors. Our discussion is sufficiently general that it applies at arbitrary temperatures, and under conditions when the width of quasiparticle states are appreciable due to pair breaking processes, and when strong coupling effects are significant. As a first application we demonstrate in detail how in the limit of smallpair breaking and for a weak coupling superconductor the collision term in the formalism reduces to the one in the quasiparticle Boltzmann equation. We next treat the case of charge imbalance generated by tunnel injection, with pair breaking by phonons and magnetic impurities. Over the range of temperatures investigated exerimentally to date, the calculated charge imbalance is rather close to that evaluated using the Boltzmann equation, even if pair braeking is so strong as almost to destroy superconductivity. Finally we consider charge imbalance generated by the combined influence of a supercurrent and a temperature gradient. We give calculations for a dirty superconductor with scattering by phonons as the pair breaking mechanism, and the results give a reasonable account of the experimental data of Clarke, Fjordboge, and Lindelof. We carry out calculations for the case of impurity scattering along which are valid not only in the clean and dirty limits, but also for intermediate situations. These enable us to see how the large contribution to the charge imbalance found for energies close to the gap edge in the clean case is reduced with increasing impurity scattering

Image processing applications: From particle physics to society

International Nuclear Information System (INIS)

Sotiropoulou, C.-L.; Citraro, S.; Dell'Orso, M.; Luciano, P.; Gkaitatzis, S.; Giannetti, P.

2017-01-01

We present an embedded system for extremely efficient real-time pattern recognition execution, enabling technological advancements with both scientific and social impact. It is a compact, fast, low consumption processing unit (PU) based on a combination of Field Programmable Gate Arrays (FPGAs) and the full custom associative memory chip. The PU has been developed for real time tracking in particle physics experiments, but delivers flexible features for potential application in a wide range of fields. It has been proposed to be used in accelerated pattern matching execution for Magnetic Resonance Fingerprinting (biomedical applications), in real time detection of space debris trails in astronomical images (space applications) and in brain emulation for image processing (cognitive image processing). We illustrate the potentiality of the PU for the new applications.

Fasting protects mice from lethal DNA damage by promoting small intestinal epithelial stem cell survival.

Science.gov (United States)

Tinkum, Kelsey L; Stemler, Kristina M; White, Lynn S; Loza, Andrew J; Jeter-Jones, Sabrina; Michalski, Basia M; Kuzmicki, Catherine; Pless, Robert; Stappenbeck, Thaddeus S; Piwnica-Worms, David; Piwnica-Worms, Helen

2015-12-22

Short-term fasting protects mice from lethal doses of chemotherapy through undetermined mechanisms. Herein, we demonstrate that fasting preserves small intestinal (SI) architecture by maintaining SI stem cell viability and SI barrier function following exposure to high-dose etoposide. Nearly all SI stem cells were lost in fed mice, whereas fasting promoted sufficient SI stem cell survival to preserve SI integrity after etoposide treatment. Lineage tracing demonstrated that multiple SI stem cell populations, marked by Lgr5, Bmi1, or HopX expression, contributed to fasting-induced survival. DNA repair and DNA damage response genes were elevated in SI stem/progenitor cells of fasted etoposide-treated mice, which importantly correlated with faster resolution of DNA double-strand breaks and less apoptosis. Thus, fasting preserved SI stem cell viability as well as SI architecture and barrier function suggesting that fasting may reduce host toxicity in patients undergoing dose intensive chemotherapy.

Recent developments and applications of fast position-sensitive gas detectors

International Nuclear Information System (INIS)

Sauli, Fabio

1999-01-01

The introduction, 30 years ago, of the multiwire proportional chamber initiated a very active and fruitful period of development of fast gas detectors. Performing position-sensitive devices have been perfected, for the needs of elementary particle physics and for applications in medical diagnostics, biology, material analysis. The high rate performance of wire counters, limited by positive ions accumulation, was largely improved with the introduction of the micro-strip gas chamber, capable of achieving position accuracies of few tens of microns at radiation fluxes exceeding 1 MHz/mm 2 . The micro-strip chamber properties have been extensively studied in view of large scale use in high luminosity experiments; some interesting applications in other fields will be described here. Originally conceived as a gain booster to solve reliability problems met with micro-strips, the gas electron multiplier was invented about a year and a half ago. Progress made with high gain models is leading to a new concept in gas detectors, powerful yet cheap and reliable. Possible developments and applications will be discussed: large area position-sensitive photo detectors and X-ray imagers, including devices with non-planar geometry suited to spectrometers and crystal diffraction studies

Gauge symmetry breaking

International Nuclear Information System (INIS)

Weinberg, S.

1976-01-01

The problem of how gauge symmetries of the weak interactions get broken is discussed. Some reasons why such a heirarchy of gauge symmetry breaking is needed, the reason gauge heirarchies do not seem to arise in theories of a given and related type, and the implications of theories with dynamical symmetry breaking, which can exhibit a gauge hierarchy

Fast reactors in nuclear power

Energy Technology Data Exchange (ETDEWEB)

Kazachkovskii, O

1981-02-01

The possible applications are discussed of fast reactor nuclear power plants. Basic differences are explained in fast and thermal reactors, mainly with a view to nuclear fuel utilization. Discussed in more detail are the problems of nuclear fuel reproduction and the nost important technical problems of fast reactors. Flow charts are shown of heat transfer for fast reactors BN-350 (loop design) and BN-600 (integral coolant circuit design). Main specifications are given for demonstration and power fast reactors in operation, under construction and in project-stage.

Scaling effects concerning the analysis of small break experiments

International Nuclear Information System (INIS)

Austregesilo Filho, H.

1985-01-01

Some scaling effects related to the experimental facilities as well as to the analytical models used for the design and safety analysis of nuclear power plants are discussed or the basis of phenomena expected to occur during small-break loss - of - coolant accidents. The results of isolated small-break experiments should not be directly extrapolated to the safety analysis of commercial reactors, due to the scaling distortions inherent to the test facilities. With respect to the analytical models used to simulate thermohydraulic processes in experimental facilities, their eventual dependence relative to the system dimension should be examined in order to assess their applicability to the safety analysis of commercial power plants. (Author) [pt

Improving ISD Agility in Fast-Moving Software Organizations

DEFF Research Database (Denmark)

Persson, John Stouby; Nørbjerg, Jacob; Nielsen, Peter Axel

2016-01-01

Fast-moving software organizations must respond quickly to changing technological options and market trends while delivering high-quality services at competitive prices. Improving agility of information systems development (ISD) may reconcile these inherent tensions, but previous research...... study on how to improve ISD agility in a fast-moving software organization. The study maps central problems in the ISD management to direct improvements of agility. Our following intervention addressed method improvements in defining types of ISD by customer relations and integrating the method...... with the task management tool used by the organization. The paper discusses how the action research contributes to our understanding of ISD agility in fast-moving software organizations with a framework for mapping and evaluating improvements of agility. The action research specifically points out that project...

Slow and fast light effects in semiconductor optical amplifiers for applications in microwave photonics

DEFF Research Database (Denmark)

Xue, Weiqi

This thesis analyzes semiconductor optical amplifiers based slow and fast light effects with particular focus on the applications in microwave photonics. We conceive novel ideas and demonstrate a great enhancement of light slow down. Furthermore, by cascading several slow light stages, >360 degree...... microwave phase shifts over a bandwidth of several tens of gigahertz are achieved. These also satisfy the basic requirements of microwave photonic systems. As an application demonstration, a tunable microwave notch filter is realized, where slow light based phase shifters provide 100% fractional tuning over...

Electroweak breaking in supersymmetric models

CERN Document Server

Ibáñez, L E

1992-01-01

We discuss the mechanism for electroweak symmetry breaking in supersymmetric versions of the standard model. After briefly reviewing the possible sources of supersymmetry breaking, we show how the required pattern of symmetry breaking can automatically result from the structure of quantum corrections in the theory. We demonstrate that this radiative breaking mechanism works well for a heavy top quark and can be combined in unified versions of the theory with excellent predictions for the running couplings of the model. (To be published in ``Perspectives in Higgs Physics'', G. Kane editor.)

Ten dimensional SO(10) G.U.T. models with dynamical symmetry breaking

International Nuclear Information System (INIS)

Hanlon, B.E.; Joshi, G.C.

1993-01-01

To date, considerations on SO (10) models within Coset Space Dimensional Reduction (CSDR) have been diagonalized to the standard model or rely upon imaginative applications of Wilson lines so as to avoid the problem of the nonexistence of an intermediate Higgs mechanism. However, there is an alternative approach involving four fermion condensates, breaking symmetries by a dynamical mechanism. Indeed, dynamical symmetry breaking has been the direction taken in some SU(5) models within this framework in order to avoid the problems of electroweak symmetry breaking at the compactification scale. This paper presents realistic models which utilize this mechanism. It is shown that the appropriate fermionic representations can emerge from CSDR and the construction of such condensates within the constraints of this scheme is presented. By introducing discrete symmetries onto the internal manifold a strong breaking of the SO(10) G.U.T. is produced and, more importantly, eliminate Higgs fields of geometrical origin. 31 refs

Environmental applications of the centrifugal fast analyzer

International Nuclear Information System (INIS)

Goldstein, G.; Strain, J.E.; Bowling, J.L.

1975-12-01

The centrifugal fast analyzer (GeMSAEC Fast Analyzer) was applied to the analysis of pollutants in air and water. Since data acquisition and processing are computer controlled, considerable effort went into devising appropriate software. A modified version of the standard FOCAL interpreter was developed which includes special machine language functions for data timing, acquisition, and storage, and also permits chaining together of programs stored on a disk. Programs were written and experimental procedures developed to implement spectrophotometric, turbidimetric, kinetic (including initial-rate, fixed-time, and variable-time techniques), and chemiluminescence methods of analysis. Analytical methods were developed for the following elements and compounds: SO 2 , O 3 , Ca, Cr, Cu, Fe, Mg, Se(IV), Zn, Cl - , I - , NO 2 - , PO 4 -3 , S -2 , and SO 4 -2 . In many cases, standard methods could be adapted to the centrifugal analyzer, in others new methods were employed. In general, analyses performed with the centrifugal fast analyzer were faster, more precise, and more accurate than with conventional instrumentation

Application of Fast Neutron Activity for Analysing Element Content on the Air Particulate

International Nuclear Information System (INIS)

Elin Nuraini; Ngasifudin; Sunardi; Elisabeth

2003-01-01

The research on application of fast neutron activation analysis for analysing element content on the air particulate has been done. The research about analysis of the particulate matters contained in non industrial traffic territory of Surakarta and full industrial traffic territory of Karanganyar, had been done using Fast Neutron Activation Analysis Method. Fast Neutron Activation Analysis method is one of the element analysis method which it's basic principle causes radioactivity appearance from the samples after being irradiated by neutron. The qualitative analysis method is based on the measuring of specific energy which was radiated by radioactive's nucleus and quantitative analysis method is based on the measuring of the intensity of each peak gamma energy. The qualitative analysis results showed, some element were identified i.e : 51 V ; 200 Pb, 27 Al and 52 Cr. The result showed that Pb level is 2.21 ± 0.09x10 -1 mg/m 3 in non industrial traffic territory of Surakarta and 2.78 ± 0.11x10 -1 mg/m 3 full industrial traffic territory of Karanganyar, this value greater than threshold value according 6.0x10 -2 mg/m 3 . (author)

Nonextensive Entropy, Prior PDFs and Spontaneous Symmetry Breaking

OpenAIRE

Shafee, Fariel

2008-01-01

We show that using nonextensive entropy can lead to spontaneous symmetry breaking when a parameter changes its value from that applicable for a symmetric domain, as in field theory. We give the physical reasons and also show that even for symmetric Dirichlet priors, such a defnition of the entropy and the parameter value can lead to asymmetry when entropy is maximized.

Induction of double-strand breaks in DNA of prokaryotes and eukaryotes and their repair. 1. Application of elastoviscosimetry for studying double-strand breaks in DNA of Escherichia coli induced by. gamma. -irradiation

Energy Technology Data Exchange (ETDEWEB)

Bresler, S E; Noskin, L A; Suslov, A V [AN SSSR, Leningrad. Inst. Yadernoj Fiziki

1980-11-01

It is shown that the method of elastoviscosimetry gives a possibility to record the formation of DNA double-strand breaks in Escherichia coli cells induced by ..gamma.. irradiation at doses close to D/sub 37/. The dependence of changes of elastoviscosity parameter on the dose (tau/sub 0/) passes through the maximum. It is shown that the ascending section of this curve (at minimum ..gamma.. irradiation doses) characterizes the relaxation process of the superspiralised chromosome in nucleotide of the E. coli. This relaxation is observed due to ..gamma.. induced damages which are not double-strand breaks. By the maximum position one can judge on a dose yield of the first DNA double-strand break, the descending part of the dose curve describes the kinetics of accumulation of breaks with the dose increase. The analysis of the data obtained gives the possibility to come to the conclusion that when applying a usual technique of irradiation and lysis of cells not providing for special measures on inhibition of endo-and exonuclease activity in ..gamma.. irradiated cells, the dose yield of double-strand breaks noticeably increases (by 4.2 times). In the case of an essential, though incomplete, inhibition of nuclease activities in ..gamma.. irradiated cells the dose yield of breaks approximately corresponds to the dose curve of inactivation of these cells (D/sub 37/12.5+-3.0 krad, the first double-strand break -at 14.5+-2.4 krad).

Induction of double-strand breaks in DNA of prokaryotes and eukaryotes and their repair. 1. Application of elastoviscosimetry for studying double-strand breaks in DNA of Escherichia coli induced by γ-irradiation

International Nuclear Information System (INIS)

Bresler, S.E.; Noskin, L.A.; Suslov, A.V.

1980-01-01

It is shown that the method of elastoviscosimetry gives a possibility to record the formation of DNA double-strand breaks in Escherichia coli cells induced by γ irradiation at doses close to D 37 . The dependence of changes of elastoviscosity parameter on the dose (tau 0 ) passes through the maximum. It is shown that the ascending section of this curve (at minimum γ irradiation doses) characterizes the relaxation process of the superspiralised chromosome in nucleotide of the E. coli. This relaxation is observed due to γ induced damages which are not double-strand breaks. By the maximum position one can judge on a dose yield of the first DNA double-strand break, the descending part of the dose curve describes the kinetics of accumulation of breaks with the dose increase. The analysis of the data obtained gives the possibility to come to the conclusion that when applying a usual technique of irradiation and lysis of cells not providing for special measures on inhibition of endo-and exonuclease activity in γ irradiated cells, the dose yield of double-strand breaks noticeably increases (by 4.2 times). In the case of an essential, though incomplete, inhibition of nuclease activities in γ irradiated cells the dose yield of breaks approximately corresponds to the dose curve of inactivation of these cells (D 37 12.5+-3.0 krad, the first double-strand break -at 14.5+-2.4 krad)

Eddy current array probe for detection of surface breaking cracks in the extrados of feeder bends

International Nuclear Information System (INIS)

Obrutsky, L.S.; Cassidy, R.A.; Chaplin, K.; Martin, P.; Bureau, J.F.

2006-01-01

A new eddy current array probe has been implemented as a straightforward and promising technique for detection of outer diameter (OD) surface-breaking cracks on the extrados of feeder bends. The design is based on previous work performed at AECL, which had demonstrated that eddy current probes with laterally displaced transmit-receive coils can overcome some of the limitations of inspecting ferritic steel components for surface-breaking cracks. The Feeder Integrity Joint Program-CANDU Owners Group Inc. (FIJP-COG) Non-Destructive Evaluation (NDE) Team members commissioned AECL to work in collaboration with the probe manufacturer ZETEC, to develop a field usable eddy current array probe. The objective was to acquire a technique with the following capabilities: fast scanning non-contact inspection technique for surface breaking discontinuities; full inspection of the bend extrados OD surface in a single scan; ability to inspect first and second bends with similar settings and capabilities; permanent record for future reference; axial and circumferential crack detection in a single scan; capability to detect OD surface-breaking cracks, which can provide additional information to that provided by ultrasonic testing (UT) for flaw characterization, and detection threshold: Surface breaking cracks equivalent to a 0.5 mm deep, 10 mm long EDM notch located on the OD of the bend extrados. This paper discusses the basis for probe design, summarizes the experimental work to evaluate probe capabilities and analyzes the results from the field trial. (author)

Eddy current array probe for detection of surface breaking cracks in the extrados of feeder bends

Energy Technology Data Exchange (ETDEWEB)

Obrutsky, L.S.; Cassidy, R.A.; Chaplin, K. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)]. E-mail: obrutskyl@aecl.ca; Martin, P. [NB Power, Point Lepreau NGS, Point Lepreau, New Brunswick (Canada)]. E-mail: PMartin@nbpower.com; Bureau, J.F. [Zetec, Quebec, Quebec (Canada)]. E-mail: jean-francois.bureau@zetec.com

2006-07-01

A new eddy current array probe has been implemented as a straightforward and promising technique for detection of outer diameter (OD) surface-breaking cracks on the extrados of feeder bends. The design is based on previous work performed at AECL, which had demonstrated that eddy current probes with laterally displaced transmit-receive coils can overcome some of the limitations of inspecting ferritic steel components for surface-breaking cracks. The Feeder Integrity Joint Program-CANDU Owners Group Inc. (FIJP-COG) Non-Destructive Evaluation (NDE) Team members commissioned AECL to work in collaboration with the probe manufacturer ZETEC, to develop a field usable eddy current array probe. The objective was to acquire a technique with the following capabilities: fast scanning non-contact inspection technique for surface breaking discontinuities; full inspection of the bend extrados OD surface in a single scan; ability to inspect first and second bends with similar settings and capabilities; permanent record for future reference; axial and circumferential crack detection in a single scan; capability to detect OD surface-breaking cracks, which can provide additional information to that provided by ultrasonic testing (UT) for flaw characterization, and detection threshold: Surface breaking cracks equivalent to a 0.5 mm deep, 10 mm long EDM notch located on the OD of the bend extrados. This paper discusses the basis for probe design, summarizes the experimental work to evaluate probe capabilities and analyzes the results from the field trial. (author)

Fast ultrasonic visualisation under sodium. Application to the fast neutron reactors; Visualisation ultrasonore rapide sous sodium. application aux reacteurs a neutrons rapides

Energy Technology Data Exchange (ETDEWEB)

Imbert, Ch

1997-05-30

The fast ultrasonic visualization under sodium is in the programme of research and development on the inspection inside the fast neutron reactors. This work is about the development of a such system of fast ultrasonic imaging under sodium, in order to improve the existing visualization systems. This system is based on the principle of orthogonal imaging, it uses two linear antennas with an important dephasing having 128 piezo-composite elements of central frequency equal to 1.6 MHz. (N.C.)

Breaking and Fixing Origin-Based Access Control in Hybrid Web/Mobile Application Frameworks.

Science.gov (United States)

Georgiev, Martin; Jana, Suman; Shmatikov, Vitaly

2014-02-01

Hybrid mobile applications (apps) combine the features of Web applications and "native" mobile apps. Like Web applications, they are implemented in portable, platform-independent languages such as HTML and JavaScript. Like native apps, they have direct access to local device resources-file system, location, camera, contacts, etc. Hybrid apps are typically developed using hybrid application frameworks such as PhoneGap. The purpose of the framework is twofold. First, it provides an embedded Web browser (for example, WebView on Android) that executes the app's Web code. Second, it supplies "bridges" that allow Web code to escape the browser and access local resources on the device. We analyze the software stack created by hybrid frameworks and demonstrate that it does not properly compose the access-control policies governing Web code and local code, respectively. Web code is governed by the same origin policy, whereas local code is governed by the access-control policy of the operating system (for example, user-granted permissions in Android). The bridges added by the framework to the browser have the same local access rights as the entire application, but are not correctly protected by the same origin policy. This opens the door to fracking attacks, which allow foreign-origin Web content included into a hybrid app (e.g., ads confined in iframes) to drill through the layers and directly access device resources. Fracking vulnerabilities are generic: they affect all hybrid frameworks, all embedded Web browsers, all bridge mechanisms, and all platforms on which these frameworks are deployed. We study the prevalence of fracking vulnerabilities in free Android apps based on the PhoneGap framework. Each vulnerability exposes sensitive local resources-the ability to read and write contacts list, local files, etc.-to dozens of potentially malicious Web domains. We also analyze the defenses deployed by hybrid frameworks to prevent resource access by foreign-origin Web content

Breaking and Fixing Origin-Based Access Control in Hybrid Web/Mobile Application Frameworks

Science.gov (United States)

Georgiev, Martin; Jana, Suman; Shmatikov, Vitaly

2014-01-01

Hybrid mobile applications (apps) combine the features of Web applications and “native” mobile apps. Like Web applications, they are implemented in portable, platform-independent languages such as HTML and JavaScript. Like native apps, they have direct access to local device resources—file system, location, camera, contacts, etc. Hybrid apps are typically developed using hybrid application frameworks such as PhoneGap. The purpose of the framework is twofold. First, it provides an embedded Web browser (for example, WebView on Android) that executes the app's Web code. Second, it supplies “bridges” that allow Web code to escape the browser and access local resources on the device. We analyze the software stack created by hybrid frameworks and demonstrate that it does not properly compose the access-control policies governing Web code and local code, respectively. Web code is governed by the same origin policy, whereas local code is governed by the access-control policy of the operating system (for example, user-granted permissions in Android). The bridges added by the framework to the browser have the same local access rights as the entire application, but are not correctly protected by the same origin policy. This opens the door to fracking attacks, which allow foreign-origin Web content included into a hybrid app (e.g., ads confined in iframes) to drill through the layers and directly access device resources. Fracking vulnerabilities are generic: they affect all hybrid frameworks, all embedded Web browsers, all bridge mechanisms, and all platforms on which these frameworks are deployed. We study the prevalence of fracking vulnerabilities in free Android apps based on the PhoneGap framework. Each vulnerability exposes sensitive local resources—the ability to read and write contacts list, local files, etc.—to dozens of potentially malicious Web domains. We also analyze the defenses deployed by hybrid frameworks to prevent resource access by foreign

Application of Laser Micro-irradiation for Examination of Single and Double Strand Break Repair in Mammalian Cells.

Science.gov (United States)

Holton, Nathaniel W; Andrews, Joel F; Gassman, Natalie R

2017-09-05

Highly coordinated DNA repair pathways exist to detect, excise and replace damaged DNA bases, and coordinate repair of DNA strand breaks. While molecular biology techniques have clarified structure, enzymatic functions, and kinetics of repair proteins, there is still a need to understand how repair is coordinated within the nucleus. Laser micro-irradiation offers a powerful tool for inducing DNA damage and monitoring the recruitment of repair proteins. Induction of DNA damage by laser micro-irradiation can occur with a range of wavelengths, and users can reliably induce single strand breaks, base lesions and double strand breaks with a range of doses. Here, laser micro-irradiation is used to examine repair of single and double strand breaks induced by two common confocal laser wavelengths, 355 nm and 405 nm. Further, proper characterization of the applied laser dose for inducing specific damage mixtures is described, so users can reproducibly perform laser micro-irradiation data acquisition and analysis.

Dual descriptions of supersymmetry breaking

International Nuclear Information System (INIS)

Intrilligator, K.; Thomas, S.

1996-08-01

Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

Delivering advanced therapies: the big pharma approach.

Science.gov (United States)

Tarnowski, J; Krishna, D; Jespers, L; Ketkar, A; Haddock, R; Imrie, J; Kili, S

2017-09-01

After two decades of focused development and some recent clinical successes, cell and gene therapy (CGT) is emerging as a promising approach to personalized medicines. Genetically engineered cells as a medical modality are poised to stand alongside or in combination with small molecule and biopharmaceutical approaches to bring new therapies to patients globally. Big pharma can have a vital role in industrializing CGT by focusing on diseases with high unmet medical need and compelling genetic evidence. Pharma should invest in manufacturing and supply chain solutions that deliver reproducible, high-quality therapies at a commercially viable cost. Owing to the fast pace of innovation in this field proactive engagement with regulators is critical. It is also vital to understand the needs of patients all along the patient care pathway and to establish product pricing that is accepted by prescribers, payers and patients.

Slow and fast light effects and their applications to microwave photonics using semiconductor optical amplifiers

DEFF Research Database (Denmark)

Sales, Salvador; Xue, Weiqi; Mørk, Jesper

2010-01-01

We provide a comprehensive review of the application of slow and fast light (SFL) techniques to the field of microwave photonics. Basic principles leading to the implementation of phase shifting and true time delay operations which are instrumental in this field are first considered. We then focus....... Finally, the main results obtained for several microwave photonic applications such as filtering, arbitrary waveform generation and optoelectronic scillators (OEOs)are reviewed, and other directions for future research in the field are discussed....

R-parity breaking phenomenology

International Nuclear Information System (INIS)

Vissani, F.

1996-02-01

We review various features of the R-parity breaking phenomenology, with particular attention to the low energy observables, and to the patterns of the R-parity breaking interactions that arise in Grand Unified models. (author). 22 refs, 1 fig., 3 tabs

Fast widely-tunable single-frequency 2-micron laser for remote-sensing applications

Science.gov (United States)

Henderson, Sammy W.; Hale, Charley P.

2017-08-01

We are developing a family of fast, widely-tunable cw diode-pumped single frequency solid-state lasers, called Swift. The Swift laser architecture is compatible with operation using many different solid-state laser crystals for operation at various emission lines between 1 and 2.1 micron. The initial prototype Swift laser using a Tm,Ho:YLF laser crystal near 2.05 micron wavelength achieved over 100 mW of single frequency cw output power, up to 50 GHz-wide, fast, mode-hop-free piezoelectric tunability, and 100 kHz/ms frequency stability. For the Tm,Ho:YLF laser material, the fast 50 GHz tuning range can be centered at any wavelength from 2047-2059 nm using appropriate intracavity spectral filters. The frequency stability and power are sufficient to serve as the local oscillator (LO) laser in long-range coherent wind-measuring lidar systems, as well as a frequency-agile master oscillator (MO) or injection-seed source for larger pulsed transmitter lasers. The rapid and wide frequency tunablity meets the requirements for integrated-path or range-resolved differential absorption lidar or applications where targets with significantly different line of sight velocities (Doppler shifts) must be tracked. Initial demonstration of an even more compact version of the Swift is also described which requires less prime power and produces less waste heat.

eFAST for Pneumothorax: Real-Life Application in an Urban Level 1 Center by Trauma Team Members.

Science.gov (United States)

Maximus, Steven; Figueroa, Cesar; Whealon, Matthew; Pham, Jacqueline; Kuncir, Eric; Barrios, Cristobal

2018-02-01

The focused assessment with sonography for trauma (FAST) examination has become the standard of care for rapid evaluation of trauma patients. Extended FAST (eFAST) is the use of ultrasonography for the detection of pneumothorax (PTX). The exact sensitivity and specificity of eFAST detecting traumatic PTX during practical "real-life" application is yet to be investigated. This is a retrospective review of all trauma patients with a diagnosis of PTX, who were treated at a large level 1 urban trauma center from March 2013 through July 2014. Charts were reviewed for results of imaging, which included eFAST, chest X-ray, and CT scan. The requirement of tube thoracostomy and mechanism of injury were also analyzed. A total of 369 patients with a diagnosis of PTX were identified. A total of 69 patients were excluded, as eFAST was either not performed or not documented, leaving 300 patients identified with PTX. A total of 113 patients had clinically significant PTX (37.6%), requiring immediate tube thoracostomy placement. eFAST yielded a positive diagnosis of PTX in 19 patients (16.8%), and all were clinically significant, requiring tube thoracostomy. Chest X-ray detected clinically significant PTX in 105 patients (92.9%). The literature on the utility of eFAST for PTX in trauma is variable. Our data show that although specific for clinically significant traumatic PTX, it has poor sensitivity when performed by clinicians with variable levels of ultrasound training. We conclude that CT is still the gold standard in detecting PTX, and clinicians performing eFAST should have adequate training.

The 'SURA' fast reactor program

International Nuclear Information System (INIS)

Anon.

1979-01-01

The Commissariat a l'Energie Atomique's SURA program on fast reactor safety consists of two specific testing programs on fastbreeder reactor safety: the Cabri and Scarabee programs. Both Cabri and Scarabee are examples of multinational research collaboration. The CEA and the Karlsruhe Nuclear Research Center are each covering half of the construction costs. Britain, the US and Japan are also due to participate in these experiments. The aim of the programs is to examine the behaviour of fuel in sodium cooled fast reactors. The Cabri program consists of setting off a reactivity accident in a power reactor core which is cooled with liquid sodium, such an accident occurring after a sharp increase in reactivity or as a result of the pump suddenly breaking down without there at the same time being any fall in the control rods. In 1967 the Commissariat a l'Energie Atomique started its Scarabee research program which is trying to analyse the sort of things that can go wrong with fuel cooling systems and what the consequences can be [fr

Gastrocutaneous fistula as a late complication of fast neutron therapy for carcinoma of the stomach

International Nuclear Information System (INIS)

Griffith, C.D.M.; Arnott, S.J.

1984-01-01

A brief report is presented of a case of gastrocutaneous fistula in a 36-year-old housewife, who had been treated a year previously for carcinoma of the stomach with fast neutron therapy at a dose of 1500 cGy delivered in 20 daily treatments. The maximum tissue dose delivered to the skin surface was 1780 cGy. (U.K.)

Comparison of the DVI line break LOCA with the equivalent cold leg break with the ATLAS facility

International Nuclear Information System (INIS)

Choi, K. Y.; Cho, S.; Kang, K. H.; Park, H. S.; Kim, Y. S.; Baek, W. P.

2010-01-01

The APR1400 (Advanced Power Reactor, 1400 MWe) adopts a DVI (Direct Vessel Injection) method for ECC (Emergency Core Cooling) water delivery rather than a conventional CLI (Cold Leg Injection) method as an advanced safety feature. The break scenario of one DVI nozzle is taken into account in the small break LOCA analysis. Transient behavior during the DVI line breaks needs to be investigated and compared with the equivalent break on the cold leg. An 8.5-inch double-ended break of one DVI nozzle was simulated with the ATLAS, and a counterpart test for the DVI break was performed at the cold leg with the equivalent break size for comparison. This comparison will contribute to enhancing a comprehensive understanding of the thermal hydraulic behavior during transients. A constructed integral effect database is also used to validate the existing conservative safety analysis methodology and to develop a best-estimate safety analysis methodology for small-break LOCAs. A post-test calculation was performed with a best-estimate safety analysis code, MARS 3.1, in order to examine its prediction capability and to identify any code deficiencies for thermal hydraulic phenomena occurring during the transient. (authors)

Fast Spectrum Reactors

CERN Document Server

Todd, Donald; Tsvetkov, Pavel

2012-01-01

Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

Factors related to reduction in the consumption of fast food: application of the theory-based approaches.

Science.gov (United States)

Zeinab, Jalambadani; Gholamreza, Garmaroudi; Mehdi, Yaseri; Mahmood, Tavousi; Korush, Jafarian

2017-09-21

The Trans-Theoretical model (TTM) and Theory of Planned Behaviour (TPB) may be promising models for understanding and predicting reduction in the consumption of fast food. The aim of this study was to examine the applicability of the Trans-Theoretical model (TTM) and the additional predictive role of the subjective norms and perceived behavioural control in predicting reduction consumption of fast food in obese Iranian adolescent girls. A cross sectional study design was conducted among twelve randomly selected schools in Sabzevar, Iran from 2015 to 2017. Four hundred eighty five randomly selected students consented to participate in the study. Hierarchical regression models used to predict the role of important variables that can influence the reduction in the consumption of fast food among students. using SPSS version 22. Variables Perceived behavioural control (r=0.58, Pbehavioural processes of change (r=0.09, P=0.145), were not significant. The study demonstrated that the TTM (except the experiential and behavioural processes of change) focusing on the perceived behavioural control and subjective norms are useful models for reduction in the consumption of fast food.

He-4 fast neutron detectors in nuclear security applications

International Nuclear Information System (INIS)

Murer, D. E.

2014-01-01

This work presents studies of "4He fast neutron detectors for nuclear security applications. Such devices are high pressure gas scintillation detectors, sensitive to neutrons in the energy range of fission sources. First, an introduction to the scope of the intended application is given. This is followed by a description of all components relevant to the operation of the detector. The next chapter presents studies of various characteristics of the neutron detector, among them properties of its scintillation response, differences between neutron and gamma interactions and effects of the light collection process. The results of the detector characterization are used to develop neutron gamma discrimination methods. These methods are put to the test using measurements with a high gamma flux, and the results are compared to performance requirements of Radiation Portal Monitors. Background neutron measurements are presented next. Measured neutron rates are compared to values published in scientific literature. The fluctuation of the background count rate was studied, and the contribution of muons evaluated. Two applications of the detectors in the field of nuclear security are discussed in the last two chapters. The first one is a novel method to measure the plutonium mass in a container filled with Mixed Oxide Fuel. The last chapter presents the development of a Radiation Portal Monitor which, in addition to neutron and gamma counting, exploits time correlation to detect threats such as plutonium and "6"0Co. (author)

He-4 fast neutron detectors in nuclear security applications

Energy Technology Data Exchange (ETDEWEB)

Murer, D. E.

2014-07-01

This work presents studies of {sup 4}He fast neutron detectors for nuclear security applications. Such devices are high pressure gas scintillation detectors, sensitive to neutrons in the energy range of fission sources. First, an introduction to the scope of the intended application is given. This is followed by a description of all components relevant to the operation of the detector. The next chapter presents studies of various characteristics of the neutron detector, among them properties of its scintillation response, differences between neutron and gamma interactions and effects of the light collection process. The results of the detector characterization are used to develop neutron gamma discrimination methods. These methods are put to the test using measurements with a high gamma flux, and the results are compared to performance requirements of Radiation Portal Monitors. Background neutron measurements are presented next. Measured neutron rates are compared to values published in scientific literature. The fluctuation of the background count rate was studied, and the contribution of muons evaluated. Two applications of the detectors in the field of nuclear security are discussed in the last two chapters. The first one is a novel method to measure the plutonium mass in a container filled with Mixed Oxide Fuel. The last chapter presents the development of a Radiation Portal Monitor which, in addition to neutron and gamma counting, exploits time correlation to detect threats such as plutonium and {sup 60}Co. (author)

Test model of the fast thyristor circuit breaker, for TORE SUPRA

International Nuclear Information System (INIS)

Bareyt, B.; Leloup, C.; Rijnoudt, E.

1984-01-01

The tokamak TORE SUPRA, permits, owing to the toroidal superconducting coils and to the poloidal field system performances, long discharges (30 s and more), for a plasma current of typically 2 MA. The poloidal field system uses the magnetic energy initially stored, for the ignition and the fast rise of the plasma current, by forcing the primary current to flow through a resistor after breaking the main rectifier current by a fast thyristor circuit breaker. In order to test the technical capabilities of such a breaker system made of fast thyristors, in series and in parallel, after a single thyristor test model T1 the series arrangement was studied on a 24 thyristor test model T2 and the parallel arrangement problems, led the manufacturer CGEE Alsthom, to build a new test model T3. (author)

Factors related to reduction in the consumption of fast food: application of the theory-based approaches

Science.gov (United States)

Zeinab, Jalambadani; Gholamreza, Garmaroudi; Mehdi, Yaseri; Mahmood, Tavousi; Korush, Jafarian

2017-01-01

Background The Trans-Theoretical model (TTM) and Theory of Planned Behaviour (TPB) may be promising models for understanding and predicting reduction in the consumption of fast food. The aim of this study was to examine the applicability of the Trans-Theoretical model (TTM) and the additional predictive role of the subjective norms and perceived behavioural control in predicting reduction consumption of fast food in obese Iranian adolescent girls. Materials and Methods. A cross sectional study design was conducted among twelve randomly selected schools in Sabzevar, Iran from 2015 to 2017. Four hundred eighty five randomly selected students consented to participate in the study. Hierarchical regression models used to predict the role of important variables that can influence the reduction in the consumption of fast food among students. using SPSS version 22. Results Variables Perceived behavioural control (r=0.58, Pconsumption of fast food. Significance for public health The Ministries of Education and Public Health should cooperate in supporting the below-mentioned formal and non-formal school, family and community nutritional education and activities. Lastly, the Ministry of Public Health should conduct programmes with restaurant owners on healthy Iranian food and its hygienic presentation and promotion, to enhance their ability to compete with fast-food restaurants. PMID:29071252

A synthesis of the literature on breaking bad news or truth telling: potential for research in India.

Science.gov (United States)

Martis, Lawrence; Westhues, Anne

2013-01-01

The high incidence of fatal diseases, inequitable access to health care, and socioeconomic disparities in India generate plentiful clinical bad news including diagnosis of a life-limiting disease, poor prognosis, treatment failure, and impending death. These contexts compel health care professionals to become the messengers of bad news to patients and their families. In global literature on breaking bad news, there is very little about such complex clinical interactions occurring in India or guiding health care providers to do it well. The purpose of this article is to identify the issues for future research that would contribute to the volume, comprehensiveness, and quality of empirical literature on breaking bad news in clinical settings across India. Towards this end, we have synthesized the studies done across the globe on breaking bad news, under four themes: (a) deciding the amount of bad news to deliver; (b) attending to cultural and ethical issues; (c) managing psychological distress; and (d) producing competent messengers of bad news. We believe that robust research is inevitable to build an indigenous knowledge base, enhance communicative competence among health care professionals, and thereby to improve the quality of clinical interactions in India.

A synthesis of the literature on breaking bad news or truth telling: Potential for research in India

Directory of Open Access Journals (Sweden)

Lawrence Martis

2013-01-01

Full Text Available The high incidence of fatal diseases, inequitable access to health care, and socioeconomic disparities in India generate plentiful clinical bad news including diagnosis of a life-limiting disease, poor prognosis, treatment failure, and impending death. These contexts compel health care professionals to become the messengers of bad news to patients and their families. In global literature on breaking bad news, there is very little about such complex clinical interactions occurring in India or guiding health care providers to do it well. The purpose of this article is to identify the issues for future research that would contribute to the volume, comprehensiveness, and quality of empirical literature on breaking bad news in clinical settings across India. Towards this end, we have synthesized the studies done across the globe on breaking bad news, under four themes: (a deciding the amount of bad news to deliver; (b attending to cultural and ethical issues; (c managing psychological distress; and (d producing competent messengers of bad news. We believe that robust research is inevitable to build an indigenous knowledge base, enhance communicative competence among health care professionals, and thereby to improve the quality of clinical interactions in India.

Fasting Ramadan in chronic kidney disease patients: Clinical and biochemical effects

Directory of Open Access Journals (Sweden)

Bernieh Bassam

2010-01-01

Full Text Available Fasting of the month of Ramadan is a pillar of Islam. Muslim patients with chronic kidney disease (CKD usually fast this month. To determine the effects of fasting on renal function in CKD patients, we prospectively studied 31 (19 males and mean age 54 ±14.2 years CKD patients during the month of Ramadan 1426 Hijra (4 th October - 4 th November 2005; 14 patients were in stage III CKD, 12 had stage IV and 5 had stage V. The mean estimated glomerular filtration rate (e-GFR was 29 ± 16.3 mL/min. Diabetes was the main cause of CKD (19 (61% patients, and hypertension was present in 22 (71% patients. Clinical assessment and renal function tests were performed one month prior to fasting then during and a month later. Medications were taken in two divided doses at sunset (time of breaking the fast and pre dawn (before starting the fast. All patients fasted the whole month of Ramadan with a good tolerance, tendency to weight reduction, and lower systolic and diastolic blood pressure. eGFR showed a significant improvement during the fast and the month after. The blood sugar was high during fasting with an increment in the Hb A1c. There was better lipid profile, reduction of the pro-teinuria and urinary sodium. We conclude that this study demonstrates a good tolerance and safety of fasting Ramadan in CKD patients.

Radiation-chemical discussion on inverse dose-rate effect observed in radiation-induced strand breaks of plasmid DNA

International Nuclear Information System (INIS)

Masuda, Takahiro

1994-01-01

Experimental results of inverse dose-rate effect, so-called Kada Effects, which was published by Takakura and her coworkers on radiation-induced strand breaks of plasmid DNA in aerated aqueous solution, have been kinetically analyzed and discussed on the basis of radiation chemistry. the kinetic analysis indicates that there are two possible mechanisms; 1) equilibrium mixture of O 2 - and HO 2 is responsible for strand breaks of DNA, and 2) peroxyl radical produced from citrate is effective for the strand breaks. However, the detailed kinetic analysis revealed that the latter is improbable because unimolecular decay of the peroxyl radical must be assumed to be negligible for its participation despite fast decay of analogous organic peroxyl radicals. The analysis has also given 9.93±0.10 dm 3 mol -1 s -1 per nucleotide unit, which corresponds to 7.62 x 10 4 dm 3 mol -1 s -1 per DNA molecule, as the rate constant for the reaction of the equilibrium mixture with plasmid pBR 322 DNA. Furthermore the probability that the reaction of the mixture with a nucleotide unit of DNA leads to strand breaks was obtained to be 3.36 x 10 -3 for gamma-irradiated system and 1.98 x 10 -3 for beta-irradiated system, respectively. (author)

RF heating and current drive on NSTX with high harmonic fast waves

International Nuclear Information System (INIS)

Ryan, P.M.; Swain, D.W.; Rosenberg, A.L.

2003-01-01

NSTX is a small aspect ratio tokamak (R = 0.85 m, a = 0.65 m). The High Harmonic Fast Wave (HHFW) system is a 30 MHz, 12-element array capable of launching both symmetric and directional wave spectra for plasma heating and non-inductive current drive. It has delivered up to 6 MW for short pulses and has routinely operated at ∼3 MW for 100-400 ms pulses. Results include strong, centrally-peaked electron heating in both D and He plasmas for both high and low phase velocity spectra. H-modes were obtained with application of HHFW power alone, with stored energy doubling after the L-H transition. Beta poloidal as large as unity has been obtained with significant fractions (0.4) of bootstrap current. Differences in the loop voltage are observed depending on whether the array is phased to drive current in the co- or counter-current directions. A fast ion tail with energies extending up to 140 keV has been observed when HHFW interacts with 80 keV neutral beams; neutron rate and lost ion measurements, as well as modeling, indicate significant power absorption by the fast ions. Radial rf power deposition and driven current profiles have been calculated with ray tracing and kinetic full-wave codes and compared with measurements. (author)

A new automatic synthetic aperture radar-based flood mapping application hosted on the European Space Agency's Grid Processing of Demand Fast Access to Imagery environment

Science.gov (United States)

Matgen, Patrick; Giustarini, Laura; Hostache, Renaud

2012-10-01

This paper introduces an automatic flood mapping application that is hosted on the Grid Processing on Demand (GPOD) Fast Access to Imagery (Faire) environment of the European Space Agency. The main objective of the online application is to deliver operationally flooded areas using both recent and historical acquisitions of SAR data. Having as a short-term target the flooding-related exploitation of data generated by the upcoming ESA SENTINEL-1 SAR mission, the flood mapping application consists of two building blocks: i) a set of query tools for selecting the "crisis image" and the optimal corresponding "reference image" from the G-POD archive and ii) an algorithm for extracting flooded areas via change detection using the previously selected "crisis image" and "reference image". Stakeholders in flood management and service providers are able to log onto the flood mapping application to get support for the retrieval, from the rolling archive, of the most appropriate reference image. Potential users will also be able to apply the implemented flood delineation algorithm. The latter combines histogram thresholding, region growing and change detection as an approach enabling the automatic, objective and reliable flood extent extraction from SAR images. Both algorithms are computationally efficient and operate with minimum data requirements. The case study of the high magnitude flooding event that occurred in July 2007 on the Severn River, UK, and that was observed with a moderateresolution SAR sensor as well as airborne photography highlights the performance of the proposed online application. The flood mapping application on G-POD can be used sporadically, i.e. whenever a major flood event occurs and there is a demand for SAR-based flood extent maps. In the long term, a potential extension of the application could consist in systematically extracting flooded areas from all SAR images acquired on a daily, weekly or monthly basis.

Linkages among commodity futures prices in the recent financial crisis: An application of cointegration tests with a structural break

Directory of Open Access Journals (Sweden)

Yoichi Tsuchiya

2015-12-01

Full Text Available In this study, we investigate the existence of long-term co-movements among the prices of commodity futures contracts. We use a cointegration test, which accounts for the presence of a structural break. We show that while there is a long-term relationship among agricultural and among non-agricultural commodity futures prices when a structural break is taken into account, there is no such relationship without allowing for a structural break. We also show that these break points, in fact, occur a few months before the recent global financial crisis. Although the previous literature broadly casts doubt on such price co-movements, our results confirm that market performance improved during the sample period.

Two pathways of DNA double-strand break repair in G1 cells of Saccharomyces cerevisiae

International Nuclear Information System (INIS)

Glazunov, A.V.

1988-01-01

The G1 cells of the diploid yeast Saccharomyces cerevislae are known to be capable of a slow repair of DNA double-strand breaks (DSB) during holding the cells in a non-nutrient medium. In the present paper, it has been shown that S. cerevislae cells γ-irradiated in the G1 phase of cell cycle are capable of fast repair of DNA DSB; this process is completed within 30-40 min of holding the cells in water at 28 deg C. For this reason, the kinetics of DNA DSB repair during holding the cells in a non-nutrient medium are biphasic, i.e., the first, ''fast'' phase is completed within 30-40 min; wheras the second, ''slow'' one, within 48 h. Mutations rad51, rad52, rad54 and rad55 inhibit the fast repair of DNA DSB, whereas mutations rad50, rad53 and rad57 do not practically influence this process. It has been shown that the observed fast and slow repair of DNA DSB in the G1 diploid cells of S, cerevislae are separate pathways of DNA DSB repair in yeast

Fast-ball sports experts depend on an inhibitory strategy to reprogram their movement timing.

Science.gov (United States)

Nakamoto, Hiroki; Ikudome, Sachi; Yotani, Kengo; Maruyama, Atsuo; Mori, Shiro

2013-07-01

The purpose of our study was to clarify whether an inhibitory strategy is used for reprogramming of movement timing by experts in fast-ball sports when they correct their movement timing due to unexpected environmental changes. We evaluated the influence of disruption of inhibitory function of the right inferior frontal gyrus (rIFG) on reprogramming of movement timing of experts and non-experts in fast-ball sports. The task was to manually press a button to coincide with the arrival of a moving target. The target moved at a constant velocity, and its velocity was suddenly either increased or decreased in some trials. The task was performed either with or without transcranial magnetic stimulation (TMS), which was delivered to the region of the rIFG. Under velocity change conditions without TMS, the experts showed significantly smaller timing errors and a higher rate of reprogramming of movement timing than the non-experts. Moreover, TMS application during the task significantly diminished the expert group's performance, but not the control group, particularly in the condition where the target velocity decreases. These results suggest that experts use an inhibitory strategy for reprogramming of movement timing. In addition, the rIFG inhibitory function contributes to the superior movement correction of experts in fast-ball sports.

The Break

DEFF Research Database (Denmark)

Strand, Anete Mikkala Camille

2018-01-01

storytelling to enact fruitful breakings of patterns unbecoming. The claim being, that the hamster wheel of Work-life anno 2016 needs reconfiguration and the simple yet fruitful manner by which this is done is through acknowledging the benefits of bodies, spaces and artifacts – and the benefits of actually...... taking a break, discontinuing for a moment in order to continue better, wiser and more at ease. Both within and as part of the daily routines, and – now and then – outside these routines in the majesty of nature with time to explore and redirect the course of life in companionships with fellow man...

Determining Factors for Fast Corneal Sensitivity Recovery After Pterygium Excision

OpenAIRE

Julio Morán, Gemma; Campos, Pamela; Pujol Vives, Pere; Munguia, Aitana; Mas Aixalà, Enric

2016-01-01

Purpose: To establish determining factors for fast corneal sensitivity (CS) recovery after pterygium excision. Methods: Thirty-two eyes of 14 males and 18 females with primary nasal pterygium were recruited. Differences in CS (in the 4 quadrants and the center using a Cochet–Bonnet esthesiometer), pterygium corneal area (PCA), tear osmolarity, tear break-up time, Schirmer test, and ocular symptoms were analyzed before and 1 month after lesion excision. The relationship between CS recovery...

Lie-algebra approach to symmetry breaking

International Nuclear Information System (INIS)

Anderson, J.T.

1981-01-01

A formal Lie-algebra approach to symmetry breaking is studied in an attempt to reduce the arbitrariness of Lagrangian (Hamiltonian) models which include several free parameters and/or ad hoc symmetry groups. From Lie algebra it is shown that the unbroken Lagrangian vacuum symmetry can be identified from a linear function of integers which are Cartan matrix elements. In broken symmetry if the breaking operators form an algebra then the breaking symmetry (or symmetries) can be identified from linear functions of integers characteristic of the breaking symmetries. The results are applied to the Dirac Hamiltonian of a sum of flavored fermions and colored bosons in the absence of dynamical symmetry breaking. In the partially reduced quadratic Hamiltonian the breaking-operator functions are shown to consist of terms of order g 2 , g, and g 0 in the color coupling constants and identified with strong (boson-boson), medium strong (boson-fermion), and fine-structure (fermion-fermion) interactions. The breaking operators include a boson helicity operator in addition to the familiar fermion helicity and ''spin-orbit'' terms. Within the broken vacuum defined by the conventional formalism, the field divergence yields a gauge which is a linear function of Cartan matrix integers and which specifies the vacuum symmetry. We find that the vacuum symmetry is chiral SU(3) x SU(3) and the axial-vector-current divergence gives a PCAC -like function of the Cartan matrix integers which reduces to PCAC for SU(2) x SU(2) breaking. For the mass spectra of the nonets J/sup P/ = 0 - ,1/2 + ,1 - the integer runs through the sequence 3,0,-1,-2, which indicates that the breaking subgroups are the simple Lie groups. Exact axial-vector-current conservation indicates a breaking sum rule which generates octet enhancement. Finally, the second-order breaking terms are obtained from the second-order spin tensor sum of the completely reduced quartic Hamiltonian

Structural Break Tests Robust to Regression Misspecification

Directory of Open Access Journals (Sweden)

Alaa Abi Morshed

2018-05-01

Full Text Available Structural break tests for regression models are sensitive to model misspecification. We show—analytically and through simulations—that the sup Wald test for breaks in the conditional mean and variance of a time series process exhibits severe size distortions when the conditional mean dynamics are misspecified. We also show that the sup Wald test for breaks in the unconditional mean and variance does not have the same size distortions, yet benefits from similar power to its conditional counterpart in correctly specified models. Hence, we propose using it as an alternative and complementary test for breaks. We apply the unconditional and conditional mean and variance tests to three US series: unemployment, industrial production growth and interest rates. Both the unconditional and the conditional mean tests detect a break in the mean of interest rates. However, for the other two series, the unconditional mean test does not detect a break, while the conditional mean tests based on dynamic regression models occasionally detect a break, with the implied break-point estimator varying across different dynamic specifications. For all series, the unconditional variance does not detect a break while most tests for the conditional variance do detect a break which also varies across specifications.

General description of few-body break-up processes at threshold

International Nuclear Information System (INIS)

Barrachina, R.O.

2005-01-01

In this communication we describe the effects produced by an N-body threshold behavior in N + 1 body break-up processes, as it occurs in situations where one of the fragments acquires almost all the excess energy of the system. Furthermore, we relate the appearance of discontinuities in single-particle multiply differential cross sections to the threshold behavior of the remaining particles, and describe the applicability of these ideas to different systems from atomic, molecular and nuclear collision physics. We finally show that, even though the study of ultracold collisions represents the direct way of gathering information on a break-up system near threshold, the analysis of high-energy collisions provides an alternative, and sometimes advantageous, approach

FAST: An advanced code system for fast reactor transient analysis

International Nuclear Information System (INIS)

Mikityuk, Konstantin; Pelloni, Sandro; Coddington, Paul; Bubelis, Evaldas; Chawla, Rakesh

2005-01-01

One of the main goals of the FAST project at PSI is to establish a unique analytical code capability for the core and safety analysis of advanced critical (and sub-critical) fast-spectrum systems for a wide range of different coolants. Both static and transient core physics, as well as the behaviour and safety of the power plant as a whole, are studied. The paper discusses the structure of the code system, including the organisation of the interfaces and data exchange. Examples of validation and application of the individual programs, as well as of the complete code system, are provided using studies carried out within the context of designs for experimental accelerator-driven, fast-spectrum systems

Spectroscopic study of fast-neutron-irradiated chromatin

International Nuclear Information System (INIS)

Radu, L.; Gazdaru, D.; Constantinescu, B.

2004-01-01

The effects produced by fast neutrons (0-100 Gy) on chromatin structure were analyzed by (i) [ 1 H]-NMR spectroscopy, (ii) time resolved spectroscopy, and (iii) fluorescence resonance energy transfer (FRET). Two types of chromatin were tested: (i) a chromatin from a normal tissue (liver of Wistar rats) and (ii) a chromatin from a tumoral tissue (Guerin limphotrope epithelioma, a rat solid tumor). The fast-neutron action on chromatin determines greater values of the [ 1 H]-NMR transverse relaxation time, indicating a more injured structure. Time-resolved fluorescence measurements show that the relative contribution of the excited state lifetime of bound ethidium bromide to chromatin DNA diminishes with increasing irradiation doses. This reflects the damage that occurs in DNA structure: production of single- and double-strand breaks due to sugar and base modifications. By the FRET method, the distance between dansyl chloride and acridine orange coupled at chromatin was determined. This distance increases upon fast-neutron action. The radiosensitivity of the tumor tissue chromatin seems higher than that of the normal tissue chromatin, probably because of its higher (loose) euchromatin/(compact) heterochromatin ratio. As the values of the physical parameters analyzed are specific for a determined dose, the establishment of these parameters may constitute a criterion for the microdosimetry of chromatin radiolesions produced by fast neutrons. (author)

Spectroscopic study of fast-neutron-irradiated chromatin

Energy Technology Data Exchange (ETDEWEB)

Radu, L. [V. Babes National Inst., Dept. of Molecular Genetics, Bucharest (Romania)]. E-mail: serbanradu@pcnet.ro; Gazdaru, D. [Bucharest Univ., Dept. of Biophysics, Physics Faculty, Bucharest (Romania); Constantinescu, B. [H. Hulubei National Inst., Dept. of Cyclotron, Bucharest (Romania)

2004-02-01

The effects produced by fast neutrons (0-100 Gy) on chromatin structure were analyzed by (i) [{sup 1}H]-NMR spectroscopy, (ii) time resolved spectroscopy, and (iii) fluorescence resonance energy transfer (FRET). Two types of chromatin were tested: (i) a chromatin from a normal tissue (liver of Wistar rats) and (ii) a chromatin from a tumoral tissue (Guerin limphotrope epithelioma, a rat solid tumor). The fast-neutron action on chromatin determines greater values of the [{sup 1}H]-NMR transverse relaxation time, indicating a more injured structure. Time-resolved fluorescence measurements show that the relative contribution of the excited state lifetime of bound ethidium bromide to chromatin DNA diminishes with increasing irradiation doses. This reflects the damage that occurs in DNA structure: production of single- and double-strand breaks due to sugar and base modifications. By the FRET method, the distance between dansyl chloride and acridine orange coupled at chromatin was determined. This distance increases upon fast-neutron action. The radiosensitivity of the tumor tissue chromatin seems higher than that of the normal tissue chromatin, probably because of its higher (loose) euchromatin/(compact) heterochromatin ratio. As the values of the physical parameters analyzed are specific for a determined dose, the establishment of these parameters may constitute a criterion for the microdosimetry of chromatin radiolesions produced by fast neutrons. (author)

Give Young Scientists a Break

Energy Technology Data Exchange (ETDEWEB)

Wiley, H. S.

2009-11-01

There has been much concern about the impact of tight funding on the careers of young scientists. When only a small percentage of grants are approved, even the smallest problem or error with an application can push it out of the funding range. Unfortunately, the relative lack of grant writing skills by new investigators often has this effect. To avoid a situation where only experienced investigators with polished writing skills are funded, the National Institutes of Health has instituted a more generous ranking scale for new investigators. Not surprisingly, some senior investigators have protested, calling it reverse discrimination. I say that their anger is misplaced. New investigators do deserve a break.

9 CFR 590.522 - Breaking room operations.

Science.gov (United States)

2010-01-01

... personnel. (m) Ingredients and additives used in, or for, processing egg products, shall be handled in a..., Processing, and Facility Requirements § 590.522 Breaking room operations. (a) The breaking room shall be kept... clean and reasonably dry during breaking operations and free of egg meat and shells. (b) All breaking...

Rock breaking methods to replace blasting

Science.gov (United States)

Zhou, Huisheng; Xie, Xinghua; Feng, Yuqing

2018-03-01

The method of breaking rock by blasting has a high efficiency and the cost is relatively low, but the associated vibration, flyrock, production of toxic gases since the 1970’s, the Western developed countries began to study the safety of breaking rock. This paper introduces different methods and their progress to safely break rock. Ideally, safe rock breaking would have little vibration, no fly stone, and no toxic gases, which can be widely used in municipal engineering, road excavation, high-risk mining, quarrying and complex environment.

Mechanically controllable break junctions for molecular electronics.

Science.gov (United States)

Xiang, Dong; Jeong, Hyunhak; Lee, Takhee; Mayer, Dirk

2013-09-20

A mechanically controllable break junction (MCBJ) represents a fundamental technique for the investigation of molecular electronic junctions, especially for the study of the electronic properties of single molecules. With unique advantages, the MCBJ technique has provided substantial insight into charge transport processes in molecules. In this review, the techniques for sample fabrication, operation and the various applications of MCBJs are introduced and the history, challenges and future of MCBJs are discussed. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Breaking emulsions in Navy bilge collection and treatment systems

Energy Technology Data Exchange (ETDEWEB)

Little, R.C.; Patterson, R.L.

1978-05-01

A new bilge waste collection and treatment system, which serves as the collector, transporter, and gravity separator for ship's bilge waste, was used as a medium for the application of chemical demulsification techniques to emulsified oily wastes that are reluctant to separate into the constituent phases. Laboratory tests on 27 demulsifying agents showed that three cation active quaternary ammonium salts were acceptable. They were effective in breaking 5% oil-in-sea-water emulsions over a 20 hr period at 4/sup 0/-45/sup 0/C. The demuslifier concentration required to break the emulsions generally ranged from 1-2% at 4/sup 0/C to 0.1-0.2% at 45/sup 0/C. At 4/sup 0/C, the oil concentration in the separated water was in the 100-500 ppm range; at 45/sup 0/C, no more than 55 ppm was observed with most oil level readings of the order of 25 ppm or less. The demulsifiers were useful in breaking emulsions of Navy distillate oil, used motor oil, turbine oil, and bilge wastes containing unknown oil mixtures. A field demonstration supported the laboratory tests.

Interactive and automated systems for nuclear track measurements with applications to fast neutron dosimetry

International Nuclear Information System (INIS)

Roberts, J.H.; Gold, R.; McNeece, J.P.; Preston, C.C.; Ruddy, F.H.

1983-12-01

Interactive and automatic track measuring systems have been developed primarily for fast neutron dosimetry in and around reactors. The interactive system is used for proton recoil measurements in nuclear research emulsions and the automatic systems for counting fission fragment tracks in Muscovite mica. The status of these systems, along with illustrative applications, are presented, particularly with regard to their relationship to neutron personnel dosimetry. 16 references, 12 figures

Break-glass handling exceptional situations in access control

CERN Document Server

Petritsch, Helmut

2014-01-01

Helmut Petritsch describes the first holistic approach to Break-Glass which covers the whole life-cycle: from access control modeling (pre-access), to logging the security-relevant system state during Break-Glass accesses (at-access), and the automated analysis of Break-Glass accesses (post-access). Break-Glass allows users to override security restrictions in exceptional situations. While several Break-Glass models specific to given access control models have already been discussed in research (e.g., extending RBAC with Break-Glass), the author introduces a generic Break-Glass model. The pres

Fast Interactive Decision Support for Modifying Stowage Plans Using Binary Decision Diagrams

DEFF Research Database (Denmark)

Jensen, Rune Møller; Leknes, Eilif; Bebbington, Thomas

Low cost containerized shipping requires high quality stowage plans. Scalable stowage planning optimization algorithms have been developed recently. All of these algorithms, however, produce monolithic solutions that are hard for stowage coordinators to modify, which is necessary in practice due ...... fast, complete, and backtrack-free decision support. Our computational results show that the approach can solve real-sized instances when breaking symmetries among similar containers...

Comparison of the electrophoretic method with the sedimentation method for the analysis of DNA strand breaks

International Nuclear Information System (INIS)

Yamamoto, Osamu; Ogawa, Masaaki; Hoshi, Masaharu

1982-01-01

Application of electrophoresis to the analysis of DNA strand breaks was studied comparing with the sedimentation analysis. A BRL gel electrophoresis system (Type V16) was used for this study. Calf thymus DNA (1 mg/ml) irradiated with 60 Co gamma-rays in SSC solution was applied to both the electrophoretic analysis and the sedimentation analysis. Lamda phage DNA and its fragments were employed as the standard size molecules. In a range from 1 k base pairs to 6 k base pairs in length for double stranded DNA or from 2 k bases to 12 k bases for single stranded DNA, the calculated average molecular weight from the electrophoresis coincided with that from the sedimentation. Number of single strand breaks and double strand breaks were 1.34 x 10 11 breaks/mg/rad (G = 0.215) and 0.48 x 10 5 breaks/mg/rad 2 , respectively. (author)

The break-up of a viscous liquid drop in a high Reynolds number shear flow

Science.gov (United States)

Ng, Chin Hei; Aliseda, Alberto

2015-11-01

The break-up of a viscous liquid droplet in a sheared turbulent flow evolves in several steps, the most visually dominant of which is the formation of high aspect ratio ligaments. This feature takes them apart from the various break-up models based on the Hinze-Kolmogorov paradigm of eddy-spherical particle collisions. We investigate the development of ligaments in a high Reynolds number (up to 250,000) submerged round jet, within the high viscosity, near-unity density ratio regime. Unlike in H-K theory, applicable to the break-up of inviscid fluid particles, break-up of inertial-scale viscous droplets occurs through a sequence of eddy collisions and long-term deformation, as evidenced by measurements of the aspect ratio that fluctuates and increases progressively during the deformation stage, and results in non-binary break-up. Additionally, the ligament formation stretches a droplet to multiple times its original size, bringing the influence of integral-scale structures. High speed imaging has been statistically analyzed to inform and validate theoretical models for the break-up time and the break-up probability. In addition, a particle size scaling model has been developed and compared with the experimental measurements of the frozen-state particle size.

LHC Report: a break from luminosity production

CERN Multimedia

Jan Uythoven for the LHC team

2016-01-01

The LHC has been in great shape over the last few months, delivering over 20 fb-1 of integrated luminosity before the ICHEP conference in Chicago at the beginning of August. This is not much below the 25 fb-1 target for the whole of 2016. With this success in mind, a break in luminosity production was taken for six days, starting on 26 July 2016, for a machine development period.   This year, 20 days of the LHC schedule are devoted to machine development with the aim of carrying out detailed studies of the accelerator. The 20 days are divided over five different periods, called MD blocks. They can be seen as an investment in the future, so the machine can produce collisions more efficiently in the months and years to come. A detailed programme is worked out for each MD block, whereby different specialist teams are assigned periods of four to twelve hours, depending on the topic, to perform their previously approved tests. The MD program continues 24 hours per day, as in normal physics operation. One...

A Theoretical Model for the Prediction of Siphon Breaking Phenomenon

International Nuclear Information System (INIS)

Bae, Youngmin; Kim, Young-In; Seo, Jae-Kwang; Kim, Keung Koo; Yoon, Juhyeon

2014-01-01

A siphon phenomenon or siphoning often refers to the movement of liquid from a higher elevation to a lower one through a tube in an inverted U shape (whose top is typically located above the liquid surface) under the action of gravity, and has been used in a variety of reallife applications such as a toilet bowl and a Greedy cup. However, liquid drainage due to siphoning sometimes needs to be prevented. For example, a siphon breaker, which is designed to limit the siphon effect by allowing the gas entrainment into a siphon line, is installed in order to maintain the pool water level above the reactor core when a loss of coolant accident (LOCA) occurs in an open-pool type research reactor. In this paper, we develop a theoretical model to predict the siphon breaking phenomenon. In this paper, a theoretical model to predict the siphon breaking phenomenon is developed. It is shown that the present model predicts well the fundamental features of the siphon breaking phenomenon and undershooting height

A Theoretical Model for the Prediction of Siphon Breaking Phenomenon

Energy Technology Data Exchange (ETDEWEB)

Bae, Youngmin; Kim, Young-In; Seo, Jae-Kwang; Kim, Keung Koo; Yoon, Juhyeon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

A siphon phenomenon or siphoning often refers to the movement of liquid from a higher elevation to a lower one through a tube in an inverted U shape (whose top is typically located above the liquid surface) under the action of gravity, and has been used in a variety of reallife applications such as a toilet bowl and a Greedy cup. However, liquid drainage due to siphoning sometimes needs to be prevented. For example, a siphon breaker, which is designed to limit the siphon effect by allowing the gas entrainment into a siphon line, is installed in order to maintain the pool water level above the reactor core when a loss of coolant accident (LOCA) occurs in an open-pool type research reactor. In this paper, we develop a theoretical model to predict the siphon breaking phenomenon. In this paper, a theoretical model to predict the siphon breaking phenomenon is developed. It is shown that the present model predicts well the fundamental features of the siphon breaking phenomenon and undershooting height.

Ultrafast, high repetition rate, ultraviolet, fiber-laser-based source: application towards Yb+ fast quantum-logic.

Science.gov (United States)

Hussain, Mahmood Irtiza; Petrasiunas, Matthew Joseph; Bentley, Christopher D B; Taylor, Richard L; Carvalho, André R R; Hope, Joseph J; Streed, Erik W; Lobino, Mirko; Kielpinski, David

2016-07-25

Trapped ions are one of the most promising approaches for the realization of a universal quantum computer. Faster quantum logic gates could dramatically improve the performance of trapped-ion quantum computers, and require the development of suitable high repetition rate pulsed lasers. Here we report on a robust frequency upconverted fiber laser based source, able to deliver 2.5 ps ultraviolet (UV) pulses at a stabilized repetition rate of 300.00000 MHz with an average power of 190 mW. The laser wavelength is resonant with the strong transition in Ytterbium (Yb+) at 369.53 nm and its repetition rate can be scaled up using high harmonic mode locking. We show that our source can produce arbitrary pulse patterns using a programmable pulse pattern generator and fast modulating components. Finally, simulations demonstrate that our laser is capable of performing resonant, temperature-insensitive, two-qubit quantum logic gates on trapped Yb+ ions faster than the trap period and with fidelity above 99%.

Fast-ion Dα measurements of the fast-ion distribution (invited)

International Nuclear Information System (INIS)

Heidbrink, W. W.

2010-01-01

The fast-ion Dα (FIDA) diagnostic is an application of charge-exchange recombination spectroscopy. Fast ions that neutralize in an injected neutral beam emit Balmer-α light with a large Doppler shift. The spectral shift is exploited to distinguish the FIDA emission from other bright sources of Dα light. Background subtraction is the main technical challenge. A spectroscopic diagnostic typically achieves temporal, energy, and transverse spatial resolution of ∼1 ms, ∼10 keV, and ∼2 cm, respectively. Installations that use narrow-band filters achieve high spatial and temporal resolution at the expense of spectral information. For high temporal resolution, the bandpass-filtered light goes directly to a photomultiplier, allowing detection of ∼50 kHz oscillations in FIDA signal. For two-dimensional spatial profiles, the bandpass-filtered light goes to a charge-coupled device camera; detailed images of fast-ion redistribution at instabilities are obtained. Qualitative and quantitative models relate the measured FIDA signals to the fast-ion distribution function. The first quantitative comparisons between theory and experiment found excellent agreement in beam-heated magnetohydrodynamics (MHD)-quiescent plasmas. FIDA diagnostics are now in operation at magnetic-fusion facilities worldwide. They are used to study fast-ion acceleration by ion cyclotron heating, to detect fast-ion transport by MHD modes and microturbulence, and to study fast-ion driven instabilities.

Conducting an acute intense interval exercise session during the Ramadan fasting month: what is the optimal time of the day?

Science.gov (United States)

Aziz, Abdul Rashid; Chia, Michael Yong Hwa; Low, Chee Yong; Slater, Gary John; Png, Weileen; Teh, Kong Chuan

2012-10-01

This study examines the effects of Ramadan fasting on performance during an intense exercise session performed at three different times of the day, i.e., 08:00, 18:00, and 21:00 h. The purpose was to determine the optimal time of the day to perform an acute high-intensity interval exercise during the Ramadan fasting month. After familiarization, nine trained athletes performed six 30-s Wingate anaerobic test (WAnT) cycle bouts followed by a time-to-exhaustion (T(exh)) cycle on six separate randomized and counterbalanced occasions. The three time-of-day nonfasting (control, CON) exercise sessions were performed before the Ramadan month, and the three corresponding time-of-day Ramadan fasting (RAM) exercise sessions were performed during the Ramadan month. Note that the 21:00 h session during Ramadan month was conducted in the nonfasted state after the breaking of the day's fast. Total work (TW) completed during the six WAnT bouts was significantly lower during RAM compared to CON for the 08:00 and 18:00 h (p effect size [d] = .55 [small] and .39 [small], respectively) sessions, but not for the 21:00 h (p = .03, d = .18 [trivial]) session. The T(exh) cycle duration was significantly shorter during RAM than CON in the 18:00 (p Ramadan fasting had a small to moderate, negative impact on quality of performance during an acute high-intensity exercise session, particularly during the period of the daytime fast. The optimal time to conduct an acute high-intensity exercise session during the Ramadan fasting month is in the evening, after the breaking of the day's fast.

Determining health personnel's application trends of new guidelines for preoperative fasting: findings from a survey.

Science.gov (United States)

Karadağ, Mevlüde; Pekin İşeri, Ozge

2014-06-01

For over a century, the discontinuation of oral food intake preoperatively after midnight has been routinely applied. Although routine fasting during the night before elective surgery has been abandoned by many modern centers, preoperative fasting after midnight continues as a routine practice. The purpose of this study was to determine trends in health personnel's application of new guidelines for preoperative fasting. The research sample of this descriptive study consisted of 73 nurses and physicians who were working in the surgical clinics during the time when the study was conducted and who agreed to participate in the study. The data of the study were collected using a questionnaire designed by the researchers. Of the health personnel included in the study group, 43.8% routinely kept adult patients fasting after midnight, 34.2% discontinued solid food intake 8 hours preoperatively, 5.5% discontinued solid food intake 6 hours preoperatively, and 34.2% discontinued the intake of clear and particulate liquids 4 to 8 hours preoperatively. Compliance of the American Society of Anesthesiologists' "2-4-6-8 rule" by health staff was very low. This study was carried out in a hospital and based on the statements of health staff. Therefore, the findings of the study are suggestive in nature and cannot be generalized. We recommend that the study should be conducted with larger sample groups and that actual preoperative fasting periods of the patients should be determined. Copyright © 2014 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

Experimental study of fast electron transport in the framework of fast ignition for inertial fusion

International Nuclear Information System (INIS)

Vauzour, B.

2012-01-01

The framework of this PhD thesis is the validation of the fast ignition scheme for the nuclear fusion by inertial confinement. It consists in the experimental study of the various processes involved in fast electron beams propagation, produced by intense laser pulses (10 19 W.cm -2 ), through dense matter either solid or compressed. In this work we present the results of three experiments carried out on different laser facilities in order to generate fast electron beams in various conditions and study their propagation in different states of matter, from the cold solid to the warm and dense plasma.The first experiment was performed with a high intensity contrast on the UHI100 laser facility (CEA Saclay). The study of fast electron energy deposition inside thin aluminium targets highlights a strong target heating at shallow depths, where the collective effects are predominant, thus producing a steep temperature profile between front (300 eV) and rear (20 eV) sides over 20μm thickness. A numerical simulation of the experiment shows that this temperature gradient induces the formation of a shock wave, breaking through the rear side of the target and thus leading to increase the thermal emission. The experimental chronometry of the shock breakthrough allowed validating the model of the collective transport of electrons.Two other experiments were dedicated to the study of fast electron beam propagation inside compressed targets. In the first experiment on the LULI2000 laser facility, the plane compression geometry allowed to precisely dissociate the energy losses due to resistive effects from those due to the collisional ones. By comparing our experimental results with simulations, we observed a significative increase of the fast electron beam energy losses with the compression and the target heating to temperatures close to the Fermi temperature. The second experiment, performed in a cylindrical geometry, demonstrated a fast electron beam guiding phenomenon due to

Associations of sedentary behavior, sedentary bouts and breaks in sedentary time with cardiometabolic risk in children with a family history of obesity.

Directory of Open Access Journals (Sweden)

Travis John Saunders

Full Text Available Although reports in adults suggest that breaks in sedentary time are associated with reduced cardiometabolic risk, these findings have yet to be replicated in children.To investigate whether objectively measured sedentary behavior, sedentary bouts or breaks in sedentary time are independently associated with cardiometabolic risk in a cohort of Canadian children aged 8-11 years with a family history of obesity.Data from 286 boys and 236 girls living in Quebec, Canada, with at least one biological parent with obesity (QUALITY cohort were collected from 2005-2008, and analyzed in 2013. Sedentary behavior, light and moderate-to-vigorous physical activity were measured over 7 days using accelerometry. Leisure time computer/video game use and TV viewing over the past 7 days were self-reported. Outcomes included waist circumference, body mass index Z-score, fasting insulin, fasting glucose, triglycerides, HDL-cholesterol, C-reactive protein and a continuous cardiometabolic risk score.After adjustment for confounders, breaks in sedentary time and the number of sedentary bouts lasting 1-4 minutes were associated with reduced cardiometabolic risk score and lower BMI Z-score in both sexes (all p<0.05. The number of sedentary bouts lasting 5-9 minutes was negatively associated with waist circumference in girls only, while the number of bouts lasting 10-14 minutes was positively associated with fasting glucose in girls, and with BMI Z-score in boys (all p<0.05. Leisure time computer/video game use was associated with increased cardiometabolic risk score and waist circumference in boys, while TV viewing was associated with increased cardiometabolic risk, waist circumference, and BMI Z-score in girls (all p<0.05.These results suggest that frequent interruptions in sedentary time are associated with a favourable cardiometabolic risk profile and highlight the deleterious relationship between screen time and cardiometabolic risk among children with a family

An Evaluation of Practical Applicability of Multi-Assortment Production Break-Even Analysis based on Mining Companies

Science.gov (United States)

Fuksa, Dariusz; Trzaskuś-Żak, Beata; Gałaś, Zdzisław; Utrata, Arkadiusz

2017-03-01

In the practice of mining companies, the vast majority of them produce more than one product. The analysis of the break-even, which is referred to as CVP (Cost-Volume-Profit) analysis (Wilkinson, 2005; Czopek, 2003) in their case is significantly constricted, given the necessity to include multi-assortment structure in the analysis, which may have more than 20 types of assortments (depending on the grain size) in their offer, as in the case of open-pit mines. The article presents methods of evaluation of break-even (volume and value) for both a single-assortment production and a multi-assortment production. The complexity of problem of break-even evaluation for multi-assortment production has resulted in formation of many methods, and, simultaneously, various approaches to its analysis, especially differences in accounting fixed costs, which may be either totally accounted for among particular assortments, relating to the whole company or partially accounted for among particular assortments and partially relating to the company, as a whole. The evaluation of the chosen methods of break-even analysis, given the availability of data, was based on two examples of mining companies: an open-pit mine of rock materials and an underground hard coal mine. The selection of methods was set by the available data provided by the companies. The data for the analysis comes from internal documentation of the mines - financial statements, breakdowns and cost calculations.

Entropic information for travelling solitons in Lorentz and CPT breaking systems

International Nuclear Information System (INIS)

Correa, R.A.C.; Rocha, Roldão da; Souza Dutra, A. de

2015-01-01

In this work we group four research topics apparently disconnected, namely solitons, Lorentz symmetry breaking, supersymmetry, and entropy. Following a recent work (Gleiser and Stamatopoulos, 2012), we show that it is possible to construct in the context of travelling wave solutions a configurational entropy measure in functional space, from the field configurations. Thus, we investigate the existence and properties of travelling solitons in Lorentz and CPT breaking scenarios for a class of models with two interacting scalar fields. Here, we obtain a complete set of exact solutions for the model studied which display both double and single-kink configurations. In fact, such models are very important in applications that include Bloch branes, Skyrmions, Yang–Mills, Q-balls, oscillons and various superstring-motivated theories. We find that the so-called Configurational Entropy (CE) for travelling solitons shows that the best value of parameter responsible to break the Lorentz symmetry is one where the energy density is distributed equally around the origin. In this way, the information-theoretical measure of travelling solitons in Lorentz symmetry violation scenarios opens a new window to probe situations where the parameters responsible for breaking the symmetries are arbitrary. In this case, the CE selects the best value of the parameter in the model

Fast feedback in classroom practice

NARCIS (Netherlands)

Emmett, K.M.; Klaassen, K.; Eijkelhof, H.

2009-01-01

In this article we describe one application of the fast feedback method (see Berg 2003 Aust. Sci. Teach. J. 28–34) in secondary mechanics education. Two teachers tried out a particular sequence twice, in consecutive years, once with and once without the use of fast feedback. We found the method to

Supersymmetry breaking with extra dimensions

International Nuclear Information System (INIS)

Zwirner, Fabio

2004-01-01

This talk reviews some aspects of supersymmetry breaking in the presence of extra dimensions. The first part is a general introduction, recalling the motivations for supersymmetry and extra dimensions, as well as some unsolved problems of four-dimensional models of supersymmetry breaking. The central part is a more focused introduction to a mechanism for (super)symmetry breaking, proposed first by Scherk and Schwarz, where extra dimensions play a crucial role. The last part is devoted to the description of some recent results and of some open problems. (author)

Level II Probabilistic Safety Analysis Methodology for the Application to GEN-IV Sodium-cooled Fast Reactor

International Nuclear Information System (INIS)

Park, S. Y.; Kim, T. W.; Han, S. H.; Jeong, H. Y.

2010-03-01

The Korea Atomic Energy Research Institute (KAERI) has been developing liquid metal reactor (LMR) design technologies under a National Nuclear R and D Program. Nevertheless, there is no experience of the probabilistic safety assessment (PSA) domestically for a fast reactor with the metal fuel. Therefore, the objective of this study is to establish the methodologies of risk assessment for the reference design of GEN-IV sodium fast reactor (SFR). An applicability of the PSA methodology of U. S. NRC and PRISM plant to the domestic GEN-IV SFR has been studied. The study contains a plant damage state analysis, a containment event tree analysis, and a source-term release category binning process

Energy prices, multiple structural breaks, and efficient market hypothesis

Energy Technology Data Exchange (ETDEWEB)

Lee, Chien-Chiang; Lee, Jun-De [Department of Applied Economics, National Chung Hsing University, Taichung (China)

2009-04-15

This paper investigates the efficient market hypothesis using total energy price and four kinds of various disaggregated energy prices - coal, oil, gas, and electricity - for OECD countries over the period 1978-2006. We employ a highly flexible panel data stationarity test of Carrion-i-Silvestre et al. [Carrion-i-Silvestre JL, Del Barrio-Castro T, Lopez-Bazo E. Breaking the panels: an application to GDP per capita. J Econometrics 2005;8:159-75], which incorporates multiple shifts in level and slope, thereby controlling for cross-sectional dependence through bootstrap methods. Overwhelming evidence in favor of the broken stationarity hypothesis is found, implying that energy prices are not characterized by an efficient market. Thus, it shows the presence of profitable arbitrage opportunities among energy prices. The estimated breaks are meaningful and coincide with the most critical events which affected the energy prices. (author)

Energy prices, multiple structural breaks, and efficient market hypothesis

International Nuclear Information System (INIS)

Lee, Chien-Chiang; Lee, Jun-De

2009-01-01

This paper investigates the efficient market hypothesis using total energy price and four kinds of various disaggregated energy prices - coal, oil, gas, and electricity - for OECD countries over the period 1978-2006. We employ a highly flexible panel data stationarity test of Carrion-i-Silvestre et al. [Carrion-i-Silvestre JL, Del Barrio-Castro T, Lopez-Bazo E. Breaking the panels: an application to GDP per capita. J Econometrics 2005;8:159-75], which incorporates multiple shifts in level and slope, thereby controlling for cross-sectional dependence through bootstrap methods. Overwhelming evidence in favor of the broken stationarity hypothesis is found, implying that energy prices are not characterized by an efficient market. Thus, it shows the presence of profitable arbitrage opportunities among energy prices. The estimated breaks are meaningful and coincide with the most critical events which affected the energy prices. (author)

ATLAS Cold Leg Top Slot Break Analysis using RELAP5

Energy Technology Data Exchange (ETDEWEB)

Sung, Haejung; Lee, Sang Ik; Park, Ju-Hyun; Choi, Tong-Soo [KEPCO NF, Daejeon (Korea, Republic of)

2016-10-15

U.S. Nuclear Regulatory Commission (US-NRC) has been reviewing the design certification application for APR1400 submitted by Korea Electric Power Corporation (KEPCO). The main concern about cold leg top slot break is that cladding temperature might be increased by core uncover due to four loop seal reformation following flooding of safety injection water. An integral effect test for cold leg top slot break was performed by KAERI (Korea Atomic Energy Research Institute) using ATLAS (Advanced Thermal-Hydraulic Test Loop for Accident Simulation), which is a scaled down experimental facility for APR1400. In this study, RELAP5/MOD3.3/Patch04 is assessed by experimental result of ATLAS cold leg top slot break. Also, thermal hydraulic phenomena by four loop seals reformation is observed by RELAP5 result. The RELAP5/MOD3.3/Patch04 is assessed by the experimental result of ATLAS cold leg top slot break. The top slot break is described by offtake model, and the mass flow rate is fairly well estimated. The RELAP5 well predicts the correlation between general trend and four loop seal reformation. The pressure of the core region and the cladding temperature tends to increase during four loop seal reformation due to steam path blockage on four loop seals. It is presumed that the code cannot estimate two phase phenomena by loop seal clearing as same as experiments. In terms of cladding temperature, loop seal reformation due to loop seal elevation of APR1400 does not need to be the issue, since the void fraction at the active top core is maintained over 0.4.

Maximal Rashba-like spin splitting via kinetic-energy-coupled inversion-symmetry breaking

Science.gov (United States)

Sunko, Veronika; Rosner, H.; Kushwaha, P.; Khim, S.; Mazzola, F.; Bawden, L.; Clark, O. J.; Riley, J. M.; Kasinathan, D.; Haverkort, M. W.; Kim, T. K.; Hoesch, M.; Fujii, J.; Vobornik, I.; MacKenzie, A. P.; King, P. D. C.

2017-09-01

Engineering and enhancing the breaking of inversion symmetry in solids—that is, allowing electrons to differentiate between ‘up’ and ‘down’—is a key goal in condensed-matter physics and materials science because it can be used to stabilize states that are of fundamental interest and also have potential practical applications. Examples include improved ferroelectrics for memory devices and materials that host Majorana zero modes for quantum computing. Although inversion symmetry is naturally broken in several crystalline environments, such as at surfaces and interfaces, maximizing the influence of this effect on the electronic states of interest remains a challenge. Here we present a mechanism for realizing a much larger coupling of inversion-symmetry breaking to itinerant surface electrons than is typically achieved. The key element is a pronounced asymmetry of surface hopping energies—that is, a kinetic-energy-coupled inversion-symmetry breaking, the energy scale of which is a substantial fraction of the bandwidth. Using spin- and angle-resolved photoemission spectroscopy, we demonstrate that such a strong inversion-symmetry breaking, when combined with spin-orbit interactions, can mediate Rashba-like spin splittings that are much larger than would typically be expected. The energy scale of the inversion-symmetry breaking that we achieve is so large that the spin splitting in the CoO2- and RhO2-derived surface states of delafossite oxides becomes controlled by the full atomic spin-orbit coupling of the 3d and 4d transition metals, resulting in some of the largest known Rashba-like spin splittings. The core structural building blocks that facilitate the bandwidth-scaled inversion-symmetry breaking are common to numerous materials. Our findings therefore provide opportunities for creating spin-textured states and suggest routes to interfacial control of inversion-symmetry breaking in designer heterostructures of oxides and other material classes.

Chromatin damage induced by fast neutrons or UV laser radiation

Energy Technology Data Exchange (ETDEWEB)

Radu, L.; Constantinescu, B.; Gazdaru, D.; Mihailescu, I

2002-07-01

Chromatin samples from livers of Wistar rats were subjected to fast neutron irradiation in doses of 10-100 Gy or to a 248 nm excimer laser radiation, in doses of 0.5-3 MJ.m{sup -2}. The action of the radiation on chromatin was monitored by chromatin intrinsic fluorescence and fluorescence lifetimes (of bound ethidium bromide to chromatin) and by analysing fluorescence resonance energy transfer between dansyl chloride and acridine orange coupled to chromatin. For the mentioned doses of UV excimer laser radiation, the action on chromatin was more intense than in the case of fast neutrons. The same types of damage are produced by the two radiations: acidic and basic destruction of chromatin protein structure, DNA strand breaking and the increase of the distance between DNA and proteins in chromatin. (author)

Chromatin damage induced by fast neutrons or UV laser radiation

International Nuclear Information System (INIS)

Radu, L.; Constantinescu, B.; Gazdaru, D.; Mihailescu, I.

2002-01-01

Chromatin samples from livers of Wistar rats were subjected to fast neutron irradiation in doses of 10-100 Gy or to a 248 nm excimer laser radiation, in doses of 0.5-3 MJ.m -2 . The action of the radiation on chromatin was monitored by chromatin intrinsic fluorescence and fluorescence lifetimes (of bound ethidium bromide to chromatin) and by analysing fluorescence resonance energy transfer between dansyl chloride and acridine orange coupled to chromatin. For the mentioned doses of UV excimer laser radiation, the action on chromatin was more intense than in the case of fast neutrons. The same types of damage are produced by the two radiations: acidic and basic destruction of chromatin protein structure, DNA strand breaking and the increase of the distance between DNA and proteins in chromatin. (author)

Experimental study on full-scale ZrCo and depleted uranium beds applied for fast recovery and delivery of hydrogen isotopes

International Nuclear Information System (INIS)

Kou, Huaqin; Huang, Zhiyong; Luo, Wenhua; Sang, Ge; Meng, Daqiao; Luo, Deli; Zhang, Guanghui; Chen, Hao; Zhou, Ying; Hu, Changwen

2015-01-01

Highlights: • Thin double-layered annulus beds with ZrCo and depleted uranium were fabricated. • Depleted uranium bed delivered 16.41 mol H 2 at rate of 20 Pa m 3 /s within 30 min. • The delivery property of depleted uranium bed was very stable during the 10 cycles. - Abstract: Metal hydride bed is an important component for the deuterium–tritium fusion energy under development in International Thermonuclear Experimental Reactor (ITER), in which the hydrogen recovery and delivery properties are influenced by the bed configuration, operation conditions and the hydrogen storage materials contained in the bed. In this work, a thin double-layered annulus bed configuration was adopted and full-scale beds loaded with ZrCo and depleted uranium (DU) for fast recovery and delivery of hydrogen isotopes were fabricated. The properties of hydrogen recovery/delivery together with the inner structure variation in the fabricated beds were systematically studied. The effects of operation conditions on the performances of the bed were also investigated. It was found that both of the fabricated ZrCo and DU beds were able to achieve the hydrogen storage target of 17.5 mol with fast recovery rate. In addition, experimental results showed that operation of employing extra buffer vessel and scroll pump could not only promote the hydrogen delivery process but also reduce the possibility about disproportionation of ZrCo. Compared with ZrCo bed, DU bed exhibited superior hydrogen delivery performances in terms of fast delivery rate and high hydrogen delivery amount, which could deliver over 16.4 mol H 2 (93.7% of recovery amount) within 30 min at the average delivery rate of 20 Pa m 3 /s. Good reversibility as high as 10 cycles without obvious degradation tendency in both of hydrogen delivery amount and delivery rate for DU bed was also achieved in our study. It was suggested that the fabricated thin double-layered annulus DU bed was a good candidate to rapidly deliver and recover

A Summary of the NASA Design Environment for Novel Vertical Lift Vehicles (DELIVER) Project

Science.gov (United States)

Theodore, Colin R.

2018-01-01

The number of new markets and use cases being developed for vertical take-off and landing vehicles continues to explode, including the highly publicized urban air taxi and package deliver applications. There is an equally exploding variety of novel vehicle configurations and sizes that are being proposed to fill these new market applications. The challenge for vehicle designers is that there is currently no easy and consistent way to go from a compelling mission or use case to a vehicle that is best configured and sized for the particular mission. This is because the availability of accurate and validated conceptual design tools for these novel types and sizes of vehicles have not kept pace with the new markets and vehicles themselves. The Design Environment for Novel Vertical Lift Vehicles (DELIVER) project was formulated to address this vehicle design challenge by demonstrating the use of current conceptual design tools, that have been used for decades to design and size conventional rotorcraft, applied to these novel vehicle types, configurations and sizes. In addition to demonstrating the applicability of current design and sizing tools to novel vehicle configurations and sizes, DELIVER also demonstrated the addition of key transformational technologies of noise, autonomy, and hybrid-electric and all-electric propulsion into the vehicle conceptual design process. Noise is key for community acceptance, autonomy and the need to operate autonomously are key for efficient, reliable and safe operations, and electrification of the propulsion system is a key enabler for these new vehicle types and sizes. This paper provides a summary of the DELIVER project and shows the applicability of current conceptual design and sizing tools novel vehicle configurations and sizes that are being proposed for urban air taxi and package delivery type applications.

The treatment of absorber rod heterogeneity effects using homogeneous equivalent cross-sections and their application in large fast reactors

International Nuclear Information System (INIS)

Newton, T.D.

1988-01-01

This paper examines the application of homogeneous equivalent absorber rod cross-sections to the calculation of control rod anti-reactivities in large fast reactors. The method used to obtain the equivalent cross-sections is described and their validity in simple whole core geometry calculations is verified. Finally, they are employed in the calculation of control rod anti-reactivity worths in the Super Phenix 1 fast reactor and the results are compared with measured values. (author). 5 refs, 5 figs, 9 tabs

NPP Krsko small break LOCA analysis

International Nuclear Information System (INIS)

Mavko, B.; Petelin, S.; Peterlin, G.

1987-01-01

Parametric analysis of small break loss of coolant accident for the Krsko NPP was calculated by using RELAP5/MOD1 computer code. The model that was used in our calculations has been improved over several years and was previously tested in simulation (s) of start-up tests and known NPP Krsko transients. In our calculations we modelled automatic actions initiated by control, safety and protection systems. We also modelled the required operator actions as specified in emergency operating instructions. In small-break LOCA calculations, we varied break sizes in the cold leg. The influence of steam generator tube plugging on small break LOCA accidents was also analysed. (author)

Losses of neutral injected fast ions due to adiabaticity breaking processes in a field-reversed configuration

International Nuclear Information System (INIS)

Takahashi, Toshiki; Inoue, Koji; Ishizuka, Takashi; Kondoh, Yoshiomi; Iwasawa, Naotaka

2004-02-01

Losses of neutral beam (NB) injected fast ions from the confinement region of a Field-Reversed Configuration (FRC) with a strong magnetic mirror are numerically analyzed for parameters relevant to NB injection experiments on the FIX (FRC injection experiment) device [T. Asai et al., Phys. Plasmas 7, 2294 (2000)]. Ionization processes of beam particles are calculated by the Monte Carlo method. The confinement of beam ions is discussed with the concept of accessible regions that restrict the ion excursion and are determined from two constants of motion, the kinetic energy and canonical angular momentum, in the case of an axisymmetric and a steady state FRC without an electrostatic field. From the calculation of the accessible regions, it is found that all the fast ions suffer from the orbit loss on the wall surface and/or the end loss. Single particle orbits are also calculated to find a difference of confinement properties from the results by employing the accessible regions. The magnetic moment is observed to show non-adiabatic motions of the beam ions, which cause a gradual orbit loss on the wall even in a case that a strong magnetic mirror is applied. The results show that the correlation of the magnetic moment disappears as the fast ions experience the density gradient around the separatrix surface and the field-null points. (author)

Adaptation finance: How can Durban deliver on past promises?

Energy Technology Data Exchange (ETDEWEB)

Ciplet, David; Roperts, J. Timmons; He, Linlang; Fields, Spencer [Brown University (United States); Khan, Mizan [North South University (Bangladesh)

2011-11-15

There is an ever-widening chasm between the support developing countries need to adapt to climate change, and the funding promised and delivered by wealthy nations. While UN climate meetings endlessly debate terms such as 'new and additional' or 'balanced allocation', even some basic commitments to adaptation funding are going unfulfilled. And as we approach the final year of the 'fast-start' phase for climate finance, there is no plan for the crucial 'scale-up' period of 2013–2019, when contributions must swell tenfold. At the Durban negotiations, countries should take three steps to ensure the developed world can meet its agreed responsibilities: establish funding sources based on international trade; define annual targets for the scale-up; and adopt a transparent, centralised accounting system.

Application of a finite element method to leak before break (LBB) of a heat exchanger

International Nuclear Information System (INIS)

Lee, Choon-Yeol; Kwon, Jae-Do; Lee, Yong-Sun

2003-01-01

The leak before break (LBB) concept is difficult to apply to a structure with a thin tube that is immersed in a water environment. A heat exchanger in a nuclear power plant is such a structure. The present paper addresses an application of the LBB concept to a heat exchanger in a nuclear power plant. The minimum leaked coolant amount containing the radioactive material which can activate the radiation detector device installed near the heat exchanger is assumed. The postulated initial flaw size that cannot grow to the critical flaw size within the time period to activate the radiation detector is justified. In this case, the radiation detector can activate the warning signal caused by coolant leakage from initially postulated flaws of the heat exchanger. The nuclear plant can safely shutdown when this occurs. Since the postulated initial flaw size can not grow to the critical flaw size, the structural integrity of the heat exchanger is not impeded. Particularly the informational scenario presented in this paper discusses an actual nuclear plant. (author)

A model for string-breaking in QCD

International Nuclear Information System (INIS)

Antonov, Dmitri; Del Debbio, Luigi; Di Giacomo, Adriano

2003-01-01

We present a model for string breaking based on the existence of chromoelectric flux tubes. We predict the form of the long-range potential and obtain an estimate of the string breaking length. A prediction is also obtained for the behaviour with temperature of the string breaking length near the deconfinement phase transition. We plan to use this model as a guide for a program of study of string breaking on the lattice. (author)

Quartz fast component opticallystimulated luminescence: Towards routine extraction for dating applications

International Nuclear Information System (INIS)

Shen, Zhixiong; Lang, Andreas

2016-01-01

Using an uncontaminated fast component is a key for improving the reliability of quartz OSL dating for many deposits. So far no approach to extract the fast component of quartz OSL has routinely been adopted for dating practice. Key challenges for extracting fast components are (1) the difficulty of finding a unique solution in curve-fitting deconvolution of OSL decay curves and (2) the relatively poor dating precision when using experimental fast component extraction. Here, a simple mathematic solution for fast component extraction is presented that is not relying on curve-fitting deconvolution and can easily be adopted into routine dating practices. By using specifically selected data points from smoothed OSL decay curves, the precision of equivalent doses calculated using the extracted fast component can be improved over equivalent doses calculated using bulk OSL. The fast component extraction is tested on a group of age-constrained samples containing both insufficiently bleached and sufficiently bleached deposits. Fast component OSL ages are as accurate as bulk OSL ages for the sufficiently bleached deposits, but more accurate for samples where bulk OSL is affected by insufficient bleaching. We also demonstrate how using a curve smoothing procedure can improve dating precision in case of both sufficiently and insufficiently bleached deposits. - Highlights: • A simple mathematical method to extract quartz OSL fast component is presented. • The method can be adopted in D_e calculation programs for routine extraction. • The method leads to an increase in accuracy and precision of D_e. • The method works for relatively dim samples with low signal-to-noise ratios.

A reliable, fast and low cost maximum power point tracker for photovoltaic applications

Energy Technology Data Exchange (ETDEWEB)

Enrique, J.M.; Andujar, J.M.; Bohorquez, M.A. [Departamento de Ingenieria Electronica, de Sistemas Informaticos y Automatica, Universidad de Huelva (Spain)

2010-01-15

This work presents a new maximum power point tracker system for photovoltaic applications. The developed system is an analog version of the ''P and O-oriented'' algorithm. It maintains its main advantages: simplicity, reliability and easy practical implementation, and avoids its main disadvantages: inaccurateness and relatively slow response. Additionally, the developed system can be implemented in a practical way at a low cost, which means an added value. The system also shows an excellent behavior for very fast variables in incident radiation levels. (author)

The Impact of Classroom Physical Activity Breaks on Middle School Students' Health-Related Fitness: An Xbox One Kinetic Delivered 4-Week Randomized Controlled Trial

Science.gov (United States)

Yli-Piipari, S.; Layne, T.; McCollins, T.; Knox, T.

2016-01-01

The aim of the study was to examine the effect of a 4-week classroom physical activity break intervention on middle school students' health-related physical fitness. The study was a randomized controlled trial with students assigned to the experiment and control conditions. A convenience sample comprised 94 adolescents (experiment group n = 52;…

The new break-even analysis.

Science.gov (United States)

Laskaris, James; Regan, Katie

2013-12-01

Changes in the economic and legislative environment have complicated the capital acquisition landscape. Hospitals and health systems should: Question the assumptions that underlie their break-even analysis. Revamp the break-even calculator. Engage in discussions about the clinical aspects of equipment and technology acquisition decisions.

Coblation technology: plasma-mediated ablation for otolaryngology applications

Science.gov (United States)

Woloszko, Jean; Gilbride, Charles

2000-05-01

Coblation is a unique method of delivering radio frequency energy to soft tissue for applications in Otolaryngology (ENT). Using radio frequency in a bipolar mode with a conductive solution, such as saline, Coblation energizes the ions in the saline to form a small plasma field. The plasma has enough energy to break the tissue's molecular bonds, creating an ablative path. The thermal effect of this process is approximately 45 - 85 degrees Celsius, significantly lower than traditional radio-frequency techniques. Coblation has been used for Otolaryngological applications such as Uvulopalatopharyngoplasty (UPPP), tonsillectomy, turbinate reduction, palate reduction, base of tongue reduction and various Head and Neck cancer procedures. The decreased thermal effect of Coblation anecdotally has led to less pain and faster recovery for cases where tissue is excised. In cases where Coblation is applied submucosally to reduce tissue volume (inferior turbinate, soft palate), the immediate volume reduction may lead to immediate clinical benefits for the patient. Coblation is currently being tested in various clinical studies to document the benefits for otolaryngological applications.

Evaluation of pump characteristic from measurement of fast deceleration

Directory of Open Access Journals (Sweden)

Himr Daniel

2015-01-01

Full Text Available Article describes an experiment where a pump connected to the simple hydraulic circuit is decelerated. Since the deceleration is fast enough the operating point of the machine moves from the initial steady position to the breaking zone, turbine zone and back to the new steady position. A dependence of the specific energy and the torque on the flow rate was evaluated from the measurement of the input and output pressure, torque and rotational speed recorded during the deceleration. Obtained characteristic is much wider than curves obtained from regular measurement of steady state.

Nilpotent chiral superfield in N=2 supergravity and partial rigid supersymmetry breaking

Energy Technology Data Exchange (ETDEWEB)

Kuzenko, Sergei M. [School of Physics M013, The University of Western Australia,35 Stirling Highway, Crawley W.A. 6009 (Australia); Tartaglino-Mazzucchelli, Gabriele [Instituut voor Theoretische Fysica, KU Leuven,Celestijnenlaan 200D, B-3001 Leuven (Belgium)

2016-03-15

In the framework of N=2 conformal supergravity in four dimensions, we introduce a nilpotent chiral superfield suitable for the description of partial supersymmetry breaking in maximally supersymmetric spacetimes. As an application, we construct Maxwell-Goldstone multiplet actions for partial N=2→N=1 supersymmetry breaking on ℝ×S{sup 3}, AdS{sub 3}×S{sup 1} (or its covering AdS{sub 3}×ℝ), and a pp-wave spacetime. In each of these cases, the action coincides with a unique curved-superspace extension of the N=1 supersymmetric Born-Infeld action, which is singled out by the requirement of U(1) duality invariance.

Teaching Sodium Fast Reactors in CEA-INSTN

International Nuclear Information System (INIS)

Dufour, Ph.; Latgé, C.; Gicquel, L.

2013-01-01

Conclusion: Education and Training: - a key element for the future of the development of Sodium Fast Reactors, and more particularly ASTRID project. - a tool to create a new generation of skilled nuclear engineers in the field. - a unique mean to share basic knowledge, operational feedback, safety approaches. The two entities aimed to deliver Training sessions, i.e. Sodium School in Cadarache, and INSTN-Cadarache, are ready: - to conceive and propose tailored sessions, - to collaborate with other foreign Education and Training Entities

Development and characterization of a D-D fast neutron generator for imaging applications.

Science.gov (United States)

Adams, Robert; Bort, Lorenz; Zboray, Robert; Prasser, Horst-Michael

2015-02-01

The experimental characterization of a pulsed D-D fast neutron generator designed for fan-beam tomography applications is presented. Using Monte Carlo simulations the response of an LB6411 neutron probe was related to the neutron generator output. The yield was measured to be up to ∼10(7) neutrons/s. An aluminum block was moved stepwise between the source and a BC400 plastic scintillator detector in order to measure an edge response. This edge response was related to the neutron emitting spot size using Monte Carlo simulations and a simplified geometry-based model. The experimentally determined spot size of 2.2 mm agreed well with the simulated value of 1.5 mm. The time-dependence of pulsed output for various operating conditions was also measured. The neutron generator was found to satisfy design requirements for a planned fast neutron tomography arrangement based on a plastic scintillator detector array which is expected to be capable of producing 2D tomograms with a resolution of ∼1.5 mm. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of MRI fast SPGR single slice scan and continuous dynamic scan in patients with obstructive sleep apnea-hypopnea syndrome

Energy Technology Data Exchange (ETDEWEB)

Zhang Xinyu [Department of Radiology, Medical School Hospital of Qingdao University, 16 Jiangsu Road, Qingdao 266003 (China)], E-mail: myginny2@sina.com; Yang Xue [Department of Radiology, Medical School Hospital of Qingdao University, 16 Jiangsu Road, Qingdao 266003 (China)], E-mail: yangxueqyfy@126.com; Hua Hui [Department of Otorhinolaryngology-Head and Neck Surgery, Medical School Hospital of Qingdao University, Qingdao (China)], E-mail: huahuisky@163.com; Chen Jingjing [Department of Radiology, Medical School Hospital of Qingdao University, 16 Jiangsu Road, Qingdao 266003 (China)], E-mail: chenjingjingsky@126.com

2009-07-15

Objective: To evaluate the application value of MRI fast SPGR single slice scan in patients with obstructive sleep apnea-hypopnea syndrome when comparing the images between fast SPGR single slice scan and continuous dynamic scan. Methods: Eighteen patients with obstructive sleep apnea-hypopnea syndrome were examined by fast SPGR single slice scan and continuous dynamic scan in turn. Fast SPGR single slice scans were conducted when the phases of apnea, inspiration and expiration appeared on the respiratory wave of the subjects. Fast SPGR continuous dynamic scans were conducted when the patients were awake and apneic. The scan planes were median sagittal plane and axial planes (the slice of middle part of palate, the slice of inferior part of palate, the slice of middle part of lingual root and the slice of 0.5 cm beneath the free margin of epiglottis). The obstructed sites and the cross-sectional areas of upper airway were compared between the two scan methods. Results: Seven cases showed complete obstruction at the narrowest sites of upper airway when apnea appeared; eleven cases showed marked decrease in cross-sectional areas at the narrowest sites compared with the areas when the patients were awake; two cases manifested multiple narrowness. The obstructed sites showed by the two scan methods were same. The difference of the cross-sectional areas of upper airway between the two scan methods was insignificant (P > 0.05). Conclusion: Fast SPGR single slice scan can accurately reflect the obstructed sites of upper airway when the breath breaks off and is the complementary method of continuous dynamic scan. Sometimes, single slice scan can replace continuous dynamic scan.

Breaking bad news-what patients want and what they get: evaluating the SPIKES protocol in Germany.

Science.gov (United States)

Seifart, C; Hofmann, M; Bär, T; Riera Knorrenschild, J; Seifart, U; Rief, W

2014-03-01

Evaluation of the SPIKES protocol, a recommended guideline for breaking bad news, is sparse, and information about patients' preferences for bad-news delivery in Germany is lacking. Being the first actual-theoretical comparison of a 'breaking bad news' guideline, the present study evaluates the recommended steps of the SPIKES protocol. Moreover, emotional consequences and quality of bad-news delivery are investigated. A total of 350 cancer patients answered the MABBAN (Marburg Breaking Bad News Scale), a questionnaire representing the six SPIKES subscales, asking for the procedure, perception and satisfaction of the first cancer disclosure and patient's assign to these items. Only 46.2% of the asked cancer patients are completely satisfied with how bad news had been broken to them. The overall quality is significantly related to the emotional state after receiving bad news (r = -0.261, P bad news were delivered, and the resulting rang list of patients' preferences indicates that the SPIKES protocol do not fully meet the priorities of cancer patients in Germany. It could be postulated that the low satisfaction of patients observed in this study reflects the highly significant difference between patients' preferences and bad-news delivery. Therefore, some adjunctions to the SPIKES protocol should be considered, including a frequent reassurance of listeners' understanding, the perpetual possibility to ask question, respect for prearrangement needs and the conception of bad-news delivery in a two-step procedure.

Lifshitz-sector mediated SUSY breaking

International Nuclear Information System (INIS)

Pospelov, Maxim; Tamarit, Carlos

2014-01-01

We propose a novel mechanism of SUSY breaking by coupling a Lorentz-invariant supersymmetric matter sector to non-supersymmetric gravitational interactions with Lifshitz scaling. The improved UV properties of Lifshitz propagators moderate the otherwise uncontrollable ultraviolet divergences induced by gravitational loops. This ensures that both the amount of induced Lorentz violation and SUSY breaking in the matter sector are controlled by Λ HL 2 /M P 2 , the ratio of the Hořava-Lifshitz cross-over scale Λ HL to the Planck scale M P . This ratio can be kept very small, providing a novel way of explicitly breaking supersymmetry without reintroducing fine-tuning. We illustrate our idea by considering a model of scalar gravity with Hořava-Lifshitz scaling coupled to a supersymmetric Wess-Zumino matter sector, in which we compute the two-loop SUSY breaking corrections to the masses of the light scalars due to the gravitational interactions and the heavy fields

Preliminary design of a Brayton cycle as a standalone Decay Heat Removal system for the Gas-cooled Fast Reactor

International Nuclear Information System (INIS)

Epiney, A.; Mikityuk, K.; Chawla, R.; Alpy, N.; Haubensack, D.; Malo, J.Y.

2009-01-01

This paper reports a preliminary design study of a Brayton cycle which would be a dedicated, standalone Decay Heat Removal (DHR) loop of the Gas-cooled Fast Reactor (GFR). In comparison to the DHR reference strategy developed during the GFR pre-conceptual design phase (which was completed by the CEA at the end of 2007), the salient feature of this alternative device would be to combine the energetic autonomy of the natural convection process - which is foreseen for operation at high and medium pressures - to the efficiency of the forced convection process which is foreseen for operation down to very low pressures. An analytical model, the so-called 'Brayton scoping' model, is described in the paper. This is based on simplified thermodynamical and aerodynamical equations and was developed to highlight design choices. First simulations of the proposed device's performance during loss-of-coolant-accident (LOCA) transients have been performed using the CATHARE code, and these are also reported. Analysis of the simulation results are consistent with the first insights obtained from usage of the 'Brayton scoping' model, e.g. the turbomachine accelerates during the depressurization process to tend towards a steady rotational speed value which is inversely proportional to the pressure. For small break LOCA events, the device operates successfully as regards its safety function and delivers to the core a relatively unperturbed cooling mass flowrate as a function of pressure change. However, further studies are required for medium to large break sizes, since certain stability concerns have been met in such cases. For example, an unexpected turbomachine stoppage was induced during the transients, resulting in loss of the necessary core cooling mass flow. (author)

Determination of the delivered hemodialysis dose using standard methods and on-line clearance monitoring

Directory of Open Access Journals (Sweden)

Vlatković Vlastimir

2006-01-01

Full Text Available Background/aim: Delivered dialysis dose has a cumulative effect and significant influence upon the adequacy of dialysis, quality of life and development of co-morbidity at patients on dialysis. Thus, a great attention is given to the optimization of dialysis treatment. On-line Clearance Monitoring (OCM allows a precise and continuous measurement of the delivered dialysis dose. Kt/V index (K = dialyzer clearance of urea; t = dialysis time; V = patient's total body water, measured in real time is used as a unit for expressing the dialysis dose. The aim of this research was to perform a comparative assessment of the delivered dialysis dose by the application of the standard measurement methods and a module for continuous clearance monitoring. Methods. The study encompassed 105 patients who had been on the chronic hemodialysis program for more than three months, three times a week. By random choice, one treatment per each controlled patient was taken. All the treatments understood bicarbonate dialysis. The delivered dialysis dose was determined by the calculation of mathematical models: Urea Reduction Ratio (URR singlepool index Kt/V (spKt/V and by the application of OCM. Results. Urea Reduction Ratio was the most sensitive parameter for the assessment and, at the same time, it was in the strongest correlation with the other two, spKt/V indexes and OCM. The values pointed out an adequate dialysis dose. The URR values were significantly higher in women than in men, p < 0.05. The other applied model for the delivered dialysis dose measurement was Kt/V index. The obtained values showed that the dialysis dose was adequate, and that, according to this parameter, the women had significantly better dialysis, then the men p < 0.05. According to the OCM, the average value was slightly lower than the adequate one. The women had a satisfactory dialysis according to this index as well, while the delivered dialysis dose was insufficient in men. The difference

Push back to respond better: regulatory inhibition of the DNA double-strand break response.

Science.gov (United States)

Panier, Stephanie; Durocher, Daniel

2013-10-01

Single DNA lesions such as DNA double-strand breaks (DSBs) can cause cell death or trigger genome rearrangements that have oncogenic potential, and so the pathways that mend and signal DNA damage must be highly sensitive but, at the same time, selective and reversible. When initiated, boundaries must be set to restrict the DSB response to the site of the lesion. The integration of positive and, crucially, negative control points involving post-translational modifications such as phosphorylation, ubiquitylation and acetylation is key for building fast, effective responses to DNA damage and for mitigating the impact of DNA lesions on genome integrity.

The Effects of Ramadan Fasting on Anterior Segment Parameters, Visual Acuity and Intraocular Pressures of the Eye.

Science.gov (United States)

Selver, Ozlem Barut; Palamar, Melis; Gerceker, Kevser; Egrilmez, Sait; Yagci, Ayse

2017-01-01

It is aimed to determine whether fasting during Ramadan has any significant effect on anterior chamber parameters, visual acuity and intraocular pressures. 31 fasting (Group 1) and 30 non-fasting healthy volunteers (Group 2) were enrolled. All cases underwent an ophthalmological examination and anterior segment parameter evaluation (central corneal thickness (CCT), anterior chamber depth (ACD), anterior chamber volume (ACV), anterior chamber angle (ACA), pupil size) with Pentacam before and after the breaking of the Ramadan fast in Group 1, before and after dinner in Group 2. The mean age was 43.35 ± 13.20 in Group 1, 43.17 ± 12.90 in Group 2 (p= 0.955). No significant difference was detected in any of the parameters in both groups. There is a need for more detailed and associated studies to understand better about the influence of Ramadan fast on various ocular parameters.

On-line chemical sensors for applications in fast reactors

International Nuclear Information System (INIS)

Jayaraman, V.

2015-01-01

Hydrogen sensors are essential components of fast reactor sodium circuits. These sensors are needed in fast reactors for the immediate detection of any steam leak into sodium during reactor operation which can lead to failure of steam generator. Depending on the operating power of the reactor, sodium-water reaction results in either an increase in dissolved hydrogen level in sodium or an increase in hydrogen content of argon cover gas used above sodium coolant. Hence, on-line monitoring of hydrogen continuously in sodium and cover circuits helps in detection of any steam leak. In the event of accidental leak of high temperature sodium, it reacts with oxygen and moisture in air leading to sodium fires. These fires produce sodium aerosol containing oxides of sodium (Na 2 O and Na 2 O 2 ) and NaOH. For early detection of sodium fires, sensor systems based on sodium ionization detector, pH measurement and modulation of conductivity of graphite films are known in the literature. This presentation deals with the development of on-line sensors for these two applications. A diffusion based sensor using a thin walled nickel coil at 773 K and a sensitive thermal conductivity detector (TCD) has been developed for monitoring hydrogen levels in argon cover gas. This sensor has a lower detection limit of 30 ppm of hydrogen in argon. To extend the detection limit of the sensor, a surface conductivity based sensor has been developed which makes use of a thin film of semi-conducting tin oxide. Integration of this sensor with the TCD, can extend the lower detection limit to 2 ppm of hydrogen in cover gas. Electrochemical sensor based on sodium-beta-alumina has been designed, fabricated and its performance in laboratory and industrial environment was evaluated. This paper presents the logical development of these sensors highlighting their merits and limitations

Validation and application of a physics database for fast reactor fuel cycle analysis

International Nuclear Information System (INIS)

McKnight, R.D.; Stillman, J.A.; Toppel, B.J.; Khalil, H.S.

1994-01-01

An effort has been made to automate the execution of fast reactor fuel cycle analysis, using EBR-II as a demonstration vehicle, and to validate the analysis results for application to the IFR closed fuel cycle demonstration at EBR-II and its fuel cycle facility. This effort has included: (1) the application of the standard ANL depletion codes to perform core-follow analyses for an extensive series of EBR-II runs, (2) incorporation of the EBR-II data into a physics database, (3) development and verification of software to update, maintain and verify the database files, (4) development and validation of fuel cycle models and methodology, (5) development and verification of software which utilizes this physics database to automate the application of the ANL depletion codes, methods and models to perform the core-follow analysis, and (6) validation studies of the ANL depletion codes and of their application in support of anticipated near-term operations in EBR-II and the Fuel Cycle Facility. Results of the validation tests indicate the physics database and associated analysis codes and procedures are adequate to predict required quantities in support of early phases of FCF operations

The concepts of leak before break and absolute reliability of NPP equipment and piping

International Nuclear Information System (INIS)

Getman, A.F.; Komarov, O.V.; Sokov, L.M.

1997-01-01

This paper describes the absolute reliability (AR) concept for ensuring safe operation of nuclear plant equipment and piping. The AR of a pipeline or component is defined as the level of reliability when the probability of an instantaneous double-ended break is near zero. AR analysis has been applied to Russian RBMK and VVER type reactors. It is proposed that analyses required for application of the leak before break concept should be included in AR implementation. The basic principles, methods, and approaches that provide the basis for implementing the AR concept are described

The concepts of leak before break and absolute reliability of NPP equipment and piping

Energy Technology Data Exchange (ETDEWEB)

Getman, A.F.; Komarov, O.V.; Sokov, L.M. [and others

1997-04-01

This paper describes the absolute reliability (AR) concept for ensuring safe operation of nuclear plant equipment and piping. The AR of a pipeline or component is defined as the level of reliability when the probability of an instantaneous double-ended break is near zero. AR analysis has been applied to Russian RBMK and VVER type reactors. It is proposed that analyses required for application of the leak before break concept should be included in AR implementation. The basic principles, methods, and approaches that provide the basis for implementing the AR concept are described.

Supersymmetry breaking from superstrings

International Nuclear Information System (INIS)

Gaillard, M.K.

1990-05-01

The gauge hierarchy problem is briefly reviewed and a class of effective field theories obtained from superstrings is described. These are characterized by a classical symmetry, related to the space-time duality of string theory, that is responsible for the suppression of observable supersymmetry breaking effects. At the quantum level, the symmetry is broken by anomalies that provide the seed of observable supersymmetry breaking, and an acceptably large gauge hierarchy may be generated. 26 refs

Supersymmetry breaking from superstrings

International Nuclear Information System (INIS)

Gaillard, M.K.; Lawrence Berkeley Lab., CA; California Univ., Berkeley

1990-01-01

The gauge hierarchy problem is briefly reviewed and a class of effective field theories obtained from superstrings is described. These are characterized by a clasical symmetry, related to the space-time duality of string theory, that is responsible for the suppression of observable supersymmetry breaking effects. At the quantum level, the symmetry is broken by anomalies that provide the seed of observable supersymmetry breaking, and an acceptably large gauge hierarchy may be generated

Ultra-fast silicon detectors

Energy Technology Data Exchange (ETDEWEB)

Sadrozinski, H. F.-W., E-mail: hartmut@scipp.ucsc.edu [Santa Cruz Institute for Particle Physics, UC Santa Cruz, Santa Cruz, CA 95064 (United States); Ely, S.; Fadeyev, V.; Galloway, Z.; Ngo, J.; Parker, C.; Petersen, B.; Seiden, A.; Zatserklyaniy, A. [Santa Cruz Institute for Particle Physics, UC Santa Cruz, Santa Cruz, CA 95064 (United States); Cartiglia, N.; Marchetto, F. [INFN Torino, Torino (Italy); Bruzzi, M.; Mori, R.; Scaringella, M.; Vinattieri, A. [University of Florence, Department of Physics and Astronomy, Sesto Fiorentino, Firenze (Italy)

2013-12-01

We propose to develop a fast, thin silicon sensor with gain capable to concurrently measure with high precision the space (∼10 μm) and time (∼10 ps) coordinates of a particle. This will open up new application of silicon detector systems in many fields. Our analysis of detector properties indicates that it is possible to improve the timing characteristics of silicon-based tracking sensors, which already have sufficient position resolution, to achieve four-dimensional high-precision measurements. The basic sensor characteristics and the expected performance are listed, the wide field of applications are mentioned and the required R and D topics are discussed. -- Highlights: •We are proposing thin pixel silicon sensors with 10's of picoseconds time resolution. •Fast charge collection is coupled with internal charge multiplication. •The truly 4-D sensors will revolutionize imaging and particle counting in many applications.

Preparation of processed nuclear data libraries for thermal, fast and fusion research and power reactor applications

International Nuclear Information System (INIS)

Ganesan, S.

1994-03-01

A Consultants Meeting on ''Preparation of Processed Nuclear Data Libraries for Thermal, Fast and Fusion Research and Power Reactor Applications'' was convened by the International Atomic Energy Agency and held during December 13-16, 1993 December 8-10, 1993 at the IAEA Headquarters, Vienna. The detailed agenda, the complete list of participants and the recommendations are presented in this report. (author)

A fast algorithm for computer aided collimation gamma camera (CACAO)

Science.gov (United States)

Jeanguillaume, C.; Begot, S.; Quartuccio, M.; Douiri, A.; Franck, D.; Pihet, P.; Ballongue, P.

2000-08-01

The computer aided collimation gamma camera is aimed at breaking down the resolution sensitivity trade-off of the conventional parallel hole collimator. It uses larger and longer holes, having an added linear movement at the acquisition sequence. A dedicated algorithm including shift and sum, deconvolution, parabolic filtering and rotation is described. Examples of reconstruction are given. This work shows that a simple and fast algorithm, based on a diagonal dominant approximation of the problem can be derived. Its gives a practical solution to the CACAO reconstruction problem.

Consumer Preferences on eating-out at Fast Food Restaurants: A quantitative study of Pizza Hut Outlets in India

OpenAIRE

Sreevalsan, Sreelakshmi

2013-01-01

The concept of meal as eating a variety of kinds of food at regular intervals have now been replaced by breaks of fast individual eating, and mostly the young crowd nowadays do not have a proper eating pattern and prefer quick and tasty food. The fast food Industry identifies the preferences of adolescents and children, and targets a major part on their marketing schemes on them, since they have an important portion of their customer base. Young adults, another major important segment of thei...

Measurement of intracellular DNA double-strand break induction and rejoining along the track of carbon and neon particle beams in water

International Nuclear Information System (INIS)

Heilmann, Johannes; Taucher-Scholz, Gisela; Haberer, Thomas; Scholz, Michael; Kraft, Gerhard

1996-01-01

Purpose: The study was aimed at the measurement of effect-depth distributions of intracellularly induced DNA damage in water as tissue equivalent after heavy ion irradiation with therapy particle beams. Methods and Materials: An assay involving embedding of Chinese hamster ovary (CHO-K1) cells in large agarose plugs and electrophoretic elution of radiation induced DNA fragments by constant field gel electrophoresis was developed. Double-strand break production was quantified by densitometric analysis of DNA-fluorescence after staining with ethidium-bromide and determination of the fraction of DNA eluted out of the agarose plugs. Intracellular double-strand break induction and the effect of a 3 h rejoining incubation were investigated following irradiation with 250 kV x-rays and 190 MeV/u carbon- and 295 MeV/u neon-ions. Results and Conclusion: While the DNA damage induced by x-irradiation decreased continuously with penetration depth, a steady increase in the yield of double-strand breaks was observed for particle radiation, reaching distinct maxima at the position of the physical Bragg peaks. Beyond this, the extent of radiation damage dropped drastically. From comparison of DNA damage and calculated dose profiles, relative biological efficiencies (RBEs) for both double-strand break induction and unrejoined strand breaks after 3 h were determined. While RBE for the induction of DNA double-strand breaks decreased continuously with penetration depth, RBE maxima greater than unity were found with carbon- and neon-ions for double-strand break rejoining near the maximum range of the particles. The method presented here allows for a fast and accurate determination of depth profiles of relevant radiobiological effects for mixed particle fields in tissue equivalent

Japanese experience with clinical trails of fast neutrons

International Nuclear Information System (INIS)

Tsunemoto, H.; Arai, T.; Morita, S.; Ishikawa, T.; Aoki, Y.; Takada, N.; Kamata, S.

1982-01-01

Between November, 1975 and November, 1981, 825 patients were treated with 30 MeV (d-Be) neutrons at the National Institute of Radiological Sciences, Chiba. At the Institute of Medical Science, Tokyo, 302 patients were referred to the Radiation Therapy department and were treated with 16 MeV (d-Be) neutrons. The emphasis of these clinical trials with fast neutrons was placed on the estimation of the effect of fast neutrons for locally advanced cancers or radioresistant cancers, and on evaluation of the rate of complication of normal tissues following irradiaton with fast neutrons. Results were evaluated for patients with previously untreated cancer; local control of the tumor was observed in 59.1%. Complications requiring medical care developed in only 32 patients. Patients who had received pre- or postoperative irradiation were excluded from this evaluation. Late reaction of soft tissue seemed to be more severe than that observed with photon beams. The results also suggest that for carcinoma of the larynx, esophagus, uterine cervix, Pancoasts's tumor of the lung and osteosarcoma, fast neutrons were considered to be effectively applied in this randomized clinical trial. For carcinoma of the larynx, a fast nuetron boost was effectively delivered, although an interstitial implant was necessarily combined with fast neutrons for carcinoma of the tongue. The cumulative survival rate of the patients with carcinoma of the esophagus treated with fast neutrons was 26% compared to the survival rate of 10.5% obtained using photons. This was supported by evidence from the pathological studies that showed that the tumor cells which had deeply invaded into the esophagus were effectively destroyed when fast neutrons were applied

Delivering a radiation protection dividend: systemic capacity-building for the radiation safety profession in Africa

Directory of Open Access Journals (Sweden)

Julian Hilton

2014-12-01

Full Text Available Many African countries planning to enter the nuclear energy “family” have little or no experience of meeting associated radiation safety demands, whether operational or regulatory. Uses of radiation in medicine in the continent, whether for diagnostic or clinical purposes, are rapidly growing while the costs of equipment, and hence of access to services, are falling fast. In consequence, many patients and healthcare workers are facing a wide array of unfamiliar challenges, both operational and ethical, without any formal regulatory or professional framework for managing them safely. This, combined with heighted awareness of safety issues post Fukushima, means the already intense pressure on radiation safety professionals in such domains as NORM industries and security threatens to reach breaking point. A systematic competency-based capacity-building programme for RP professionals in Africa is required (Resolution of the Third AFRIRPA13 Regional Conference, Nairobi, September 2010. The goal is to meet recruitment and HR needs in the rapidly emerging radiation safety sector, while also addressing stakeholder concerns in respect of promoting and meeting professional and ethical standards. The desired outcome is an RP “dividend” to society as a whole. A curriculum model is presented, aligned to safety procedures and best practices such as Safety Integrity Level and Layer of Protection analysis; it emphasizes proactive risk communication both with direct and indirect stakeholders; and it outlines disciplinary options and procedures for managers and responsible persons for dealing with unsafe or dangerous behavior at work. This paper reports on progress to date. It presents a five-tier development pathway starting from a generic foundation course, suitable for all RP professionals, accompanied by specialist courses by domain, activity or industry. Delivery options are discussed. Part of the content has already been developed and delivered as

Computational simulation of chromosome breaks in human liver

International Nuclear Information System (INIS)

Yang Jianshe; Li Wenjian; Jin Xiaodong

2006-01-01

An easy method was established for computing chromosome breaks in cells exposed to heavily charged particles. The cell chromosome break value by 12 C +6 ions was theoretically calculated, and was tested with experimental data of chromosome breaks by using a premature chromosome condensation technique. The theoretical chromosome break value agreed well with the experimental data. The higher relative biological effectiveness of the heavy ions was closely correlated to its physical characteristics. In addition, the chromosome break value can be predicted off line. (authors)

MULTIPHASE DROPLET/SLUG BREAK-UP MECHANISM IN MICROFLUIDIC T-JUNCTIONS AT VARIOUS WEBER NUMBERS

Directory of Open Access Journals (Sweden)

Wan Leng (Dawn Leow

2011-10-01

Full Text Available Normal 0 false false false EN-MY X-NONE X-NONE The formation of immiscible liquid droplets, or slugs, in microchannels features the advantages of volume control and mixing enhancement over single-phase microflows. Although the applications of droplet-based microfluidics have been widely demonstrated, the fundamental physics governing droplet break-up remains an area of active research. This study defines an effective Weber (Weeff number that characterizes the interplay of interfacial tension, shear stress and channel pressure drop in driving slug formation in T-junction microchannel for a relative range of low, intermediate and high flow rates. The immiscible fluid system in this study consists of Tetradecane slug formation in Acetonitrile. The progressive deformation of slug interfaces during break-up events is observed. Experimental results indicate that, at a relatively low Weeff, clean slug break-up occurs at the intersection of the side and main channels. At intermediate Weeff, the connecting neck of the dispersed phase is stretched to a short and thin trail of laminar flow prior to breaking up a short distance downstream of the T-junction. At a relatively high Weeff, the connecting neck develops into a longer and thicker trail of laminar flow that breaks up further downstream of the main channel.

Fast ions and momentum transport in JET tokamak plasmas

International Nuclear Information System (INIS)

Salmi, A.

2012-01-01

Fast ions are an inseparable part of fusion plasmas. They can be generated using electromagnetic waves or injected into plasmas as neutrals to heat the bulk plasma and to drive toroidal rotation and current. In future power plants fusion born fast ions deliver the main heating into the plasma. Understanding and controlling the fast ions is of crucial importance for the operation of a power plant. Furthermore, fast ions provide ways to probe the properties of the thermal plasma and get insight of its confinement properties. In this thesis, numerical code packages are used and developed to simulate JET experiments for a range of physics issues related to fast ions. Namely, the clamping fast ion distribution at high energies with RF heating, fast ion ripple torque generation and the toroidal momentum transport properties using NBI modulation technique are investigated. Through a comparison of numerical simulations and the JET experimental data it is shown that the finite Larmor radius effects in ion cyclotron resonance heating are important and that they can prevent fast ion tail formation beyond certain energy. The identified mechanism could be used for tailoring the fast ion distribution in future experiments. Secondly, ASCOT simulations of NBI ions in a ripple field showed that most of the reduction of the toroidal rotation that has been observed in the JET enhanced ripple experiments could be attributed to fast ion ripple torque. Finally, fast ion torque calculations together with momentum transport analysis have led to the conclusion that momentum transport in not purely diffusive but that a convective component, which increases monotonically in radius, exists in a wide range of JET plasmas. Using parameter scans, the convective transport has been shown to be insensitive to collisionality and q-profile but to increase strongly against density gradient. (orig.)

Fast ions and momentum transport in JET tokamak plasmas

Energy Technology Data Exchange (ETDEWEB)

Salmi, A.

2012-07-01

Fast ions are an inseparable part of fusion plasmas. They can be generated using electromagnetic waves or injected into plasmas as neutrals to heat the bulk plasma and to drive toroidal rotation and current. In future power plants fusion born fast ions deliver the main heating into the plasma. Understanding and controlling the fast ions is of crucial importance for the operation of a power plant. Furthermore, fast ions provide ways to probe the properties of the thermal plasma and get insight of its confinement properties. In this thesis, numerical code packages are used and developed to simulate JET experiments for a range of physics issues related to fast ions. Namely, the clamping fast ion distribution at high energies with RF heating, fast ion ripple torque generation and the toroidal momentum transport properties using NBI modulation technique are investigated. Through a comparison of numerical simulations and the JET experimental data it is shown that the finite Larmor radius effects in ion cyclotron resonance heating are important and that they can prevent fast ion tail formation beyond certain energy. The identified mechanism could be used for tailoring the fast ion distribution in future experiments. Secondly, ASCOT simulations of NBI ions in a ripple field showed that most of the reduction of the toroidal rotation that has been observed in the JET enhanced ripple experiments could be attributed to fast ion ripple torque. Finally, fast ion torque calculations together with momentum transport analysis have led to the conclusion that momentum transport in not purely diffusive but that a convective component, which increases monotonically in radius, exists in a wide range of JET plasmas. Using parameter scans, the convective transport has been shown to be insensitive to collisionality and q-profile but to increase strongly against density gradient. (orig.)

The Fast Simulation Chain for ATLAS

CERN Document Server

Basalaev, Artem; The ATLAS collaboration

2016-01-01

In order to generate the huge number of Monte Carlo events that will be required by the ATLAS experiment over the next several runs, a very fast simulation is critical. Fast detector simulation alone, however, is insufficient: with very high numbers of simultaneous proton-proton collisions expected in Run 3 and beyond, the digitization (detector response emulation) and event reconstruction time quickly become comparable to the time required for detector simulation. The ATLAS Fast Chain simulation has been developed to solve this problem. Modules are implemented for fast simulation, fast digitization, and fast track reconstruction. The application is sufficiently fast -- several orders of magnitude faster than the standard simulation -- that the simultaneous proton-proton collisions can be generated during the simulation job, so Pythia8 also runs concurrently with the rest of the algorithms. The Fast Chain has been built to be extremely modular and flexible, so that each sample can be custom-tailored to match ...

Gauge unification, non-local breaking, open strings

International Nuclear Information System (INIS)

Trapletti, M.

2005-01-01

The issue of non-local GUT symmetry breaking is addressed in the context of open string model building. We study Z N xZ M ' orbifolds with all the GUT-breaking orbifold elements acting freely, as rotations accompanied by translations in the internal space. We consider open strings quantized on these backgrounds, distinguishing whether the translational action is parallel or perpendicular to the D-branes. GUT breaking is impossible in the purely perpendicular case, non-local GUT breaking is instead allowed in the purely parallel case. In the latter, the scale of breaking is set by the compactification moduli, and there are no fixed points with reduced gauge symmetry, where dangerous explicit GUT-breaking terms could be located. We investigate the mixed parallel+perpendicular case in a Z 2 xZ 2 ' example, having also a simplified field theory realization. It is a new S 1 /Z 2 xZ 2 ' orbifold-GUT model, with bulk gauge symmetry SU(5)xSU(5) broken locally to the Standard Model gauge group. In spite of the locality of the GUT symmetry breaking, there is no localized contribution to the running of the coupling constants, and the unification scale is completely set by the length of S 1

Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 3. Evaluation of potential for pipe breaks

Energy Technology Data Exchange (ETDEWEB)

1984-11-01

The Executive Director for Operations (EDO) in establishing the Piping Review Committee concurred in its overall scope that included an evaluation of the potential for pipe breaks. The Pipe Break Task Group has responded to this directive. This report summarizes a review of regulatory documents and contains the Task Group's recommendations for application of the leak-before-break (LBB) approach to the NRC licensing process. The LBB approach means the application of fracture mechanics technology to demonstrate that high energy fluid piping is very unlikely to experience double-ended ruptures or their equivalent as longitudinal or diagonal splits. The Task Group's reommendations and discussion are founded on current and ongoing NRC staff actions as presented in Section 3.0 of this report. Additional more detailed comments and discussion are presented in Section 5.0 and in Appendices A and B. The obvious issues are the reexamination of the large pipe break criteria and the implications of any changes in the criteria as they influence items such as jet loads and pipe whip. The issues have been considered and the Task Group makes the following recommendations.

Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 3. Evaluation of potential for pipe breaks

International Nuclear Information System (INIS)

1984-11-01

The Executive Director for Operations (EDO) in establishing the Piping Review Committee concurred in its overall scope that included an evaluation of the potential for pipe breaks. The Pipe Break Task Group has responded to this directive. This report summarizes a review of regulatory documents and contains the Task Group's recommendations for application of the leak-before-break (LBB) approach to the NRC licensing process. The LBB approach means the application of fracture mechanics technology to demonstrate that high energy fluid piping is very unlikely to experience double-ended ruptures or their equivalent as longitudinal or diagonal splits. The Task Group's reommendations and discussion are founded on current and ongoing NRC staff actions as presented in Section 3.0 of this report. Additional more detailed comments and discussion are presented in Section 5.0 and in Appendices A and B. The obvious issues are the reexamination of the large pipe break criteria and the implications of any changes in the criteria as they influence items such as jet loads and pipe whip. The issues have been considered and the Task Group makes the following recommendations

Oil prices: Breaks and trends

International Nuclear Information System (INIS)

Noguera, José

2013-01-01

This paper contributes to the literature of the stationarity of financial time series and the literature on oil and macroeconomics in several ways. First, it uses Kejriwal and Perron (2010) sequential procedure to endogenously determine multiple structural changes in real oil prices without facing the circular testing problem between structural changes and stationary assumptions of previous tests. Second, it performs a diagnostic check to detect the significance and magnitude of the potential breaks. Third, it uses the above information to test for the existence of stochastic trends in real oil prices, and fourth, it speculates about possible explanations for the break dates found in order to encourage further work and discussions. The exercise uses monthly data from January 1861 to August 2011. - Highlights: ► The model endogenously determine multiple structural changes in real oil prices. ► The methods used does not face the circular testing problem. ► It also detect the significance and magnitude of the breaks detected. ► It tests for the existence of stochastic trends. ► It explains the reasons for the break dates found

Climate and floods still govern California levee breaks

Science.gov (United States)

Florsheim, J.L.; Dettinger, M.D.

2007-01-01

Even in heavily engineered river systems, climate still governs flood variability and thus still drives many levee breaks and geomorphic changes. We assemble a 155-year record of levee breaks for a major California river system to find that breaks occurred in 25% of years during the 20th Century. A relation between levee breaks and river discharge is present that sets a discharge threshold above which most levee breaks occurred. That threshold corresponds to small floods with recurrence intervals of ???2-3 years. Statistical analysis illustrates that levee breaks and peak discharges cycle (broadly) on a 12-15 year time scale, in time with warm-wet storm patterns in California, but more slowly or more quickly than ENSO and PDO climate phenomena, respectively. Notably, these variations and thresholds persist through the 20th Century, suggesting that historical flood-control effects have not reduced the occurrence or frequency of levee breaks. Copyright 2007 by the American Geophysical Union.

Radiative breaking of cosmologically acceptable grand unified theories

International Nuclear Information System (INIS)

Gato, B.; Leon, J.; Quiros, M.

1984-01-01

We present a cosmologically acceptable grand unified model where the breaking of SU(5) proceeds through radiative corrections induced by supergravity soft-breaking terms. The breaking scale is determined by dimensional transmutation. The model is compatible with the radiative breaking of SU(2)sub(L)xU(1)sub(Y) which provides an experimentally accessible low energy particle spectrum and small top quark mass. (orig.)

Fast decoding algorithms for coded aperture systems

International Nuclear Information System (INIS)

Byard, Kevin

2014-01-01

Fast decoding algorithms are described for a number of established coded aperture systems. The fast decoding algorithms for all these systems offer significant reductions in the number of calculations required when reconstructing images formed by a coded aperture system and hence require less computation time to produce the images. The algorithms may therefore be of use in applications that require fast image reconstruction, such as near real-time nuclear medicine and location of hazardous radioactive spillage. Experimental tests confirm the efficacy of the fast decoding techniques

Strong Electroweak Symmetry Breaking

CERN Document Server

Grinstein, Benjamin

2011-01-01

Models of spontaneous breaking of electroweak symmetry by a strong interaction do not have fine tuning/hierarchy problem. They are conceptually elegant and use the only mechanism of spontaneous breaking of a gauge symmetry that is known to occur in nature. The simplest model, minimal technicolor with extended technicolor interactions, is appealing because one can calculate by scaling up from QCD. But it is ruled out on many counts: inappropriately low quark and lepton masses (or excessive FCNC), bad electroweak data fits, light scalar and vector states, etc. However, nature may not choose the minimal model and then we are stuck: except possibly through lattice simulations, we are unable to compute and test the models. In the LHC era it therefore makes sense to abandon specific models (of strong EW breaking) and concentrate on generic features that may indicate discovery. The Technicolor Straw Man is not a model but a parametrized search strategy inspired by a remarkable generic feature of walking technicolor,...

Nominal effective radiation doses delivered during clinical trials of boron neutron capture therapy

International Nuclear Information System (INIS)

Capala, J.; Diaz, A.Z.; Chanana, A.D.

1997-01-01

Boron neutron capture therapy (BNCT) is a binary system that, in theory, should selectively deliver lethal, high linear energy transfer (LET) radiation to tumor cells dispersed within normal tissues. It is based on the nuclear reaction 10-B(n, α)7-Li, which occurs when the stable nucleus of boron-10 captures a thermal neutron. Due to the relatively high cross-section of the 10-B nucleus for thermal neutron capture and short ranges of the products of this reaction, tumor cells in the volume exposed to thermal neutrons and containing sufficiently high concentration of 10-B would receive a much higher radiation dose than the normal cells contained within the exposed volume. Nevertheless, radiation dose deposited in normal tissue by gamma and fast neutron contamination of the neutron beam, as well as neutron capture in nitrogen, 14-N(n,p)14-C, hydrogen, 1-H(n,γ)2-H, and in boron present in blood and normal cells, limits the dose that can be delivered to tumor cells. It is, therefore, imperative for the success of the BNCT the dosed delivered to normal tissues be accurately determined in order to optimize the irradiation geometry and to limit the volume of normal tissue exposed to thermal neutrons. These are the major objectives of BNCT treatment planning

Breaking gold nano-junctions simulation and analysis

DEFF Research Database (Denmark)

Lauritzen, Kasper Primdal

, to predict the structure of a gold junction just as it breaks. This method is based on artificial neural networks and can be used on experimental data, even when it is trained purely on simulated data. The method is extended to other types of experimental traces, where it is trained without the use......Simulating the movements of individual atoms allows us to look at and investigate the physical processes that happen in an experiment. In this thesis I use simulations to support and improve experimental studies of breaking gold nano-junctions. By using molecular dynamics to study gold nanowires, I...... can investigate their breaking forces under varying conditions, like stretching rate or temperature. This resolves a confusion in the literature, where the breaking forces of two different breaking structures happen to coincide. The correlations between the rupture and reformation of a gold junction...

Dynamical study of symmetries: breaking and restauration

International Nuclear Information System (INIS)

Schuck, P.

1986-09-01

First symmetry breaking (spontaneous) is explained and the physical implication discussed for infinite systems. The relation with phase transitions is indicated. Then the specific aspects of symmetry breaking in finite systems is treated and illustrated in detail for the case of translational invariance with the help of an oversimplified but exactly solvable model. The method of projection (restauration of symmetry) is explained for the static case and also applied to the model. Symmetry breaking in the dynamical case and for instance the notion of a soft mode responsible for the symmetry breaking is discussed in the case of superfluidity and another exactly solvable model is introduced. The Goldstone mode is treated in detail. Some remarks on analogies with the breaking of chiral symmetry are made. Some recent developments in the theory of symmetry restauration are briefly outlined [fr

Routinizing Breaking News

DEFF Research Database (Denmark)

Hartley, Jannie Møller

2011-01-01

This chapter revisits seminal theoretical categorizations of news proposed three decades earlier by US sociologist Gaye Tuchman. By exploring the definition of ”breaking news” in the contemporary online newsrooms of three Danish news organisations, the author offers us a long overdue re-theorizat......-theorization of journalistic practice in the online context and helpfully explores well-evidenced limitations to online news production, such as the relationship between original reporting and the use of ”shovelware.”......This chapter revisits seminal theoretical categorizations of news proposed three decades earlier by US sociologist Gaye Tuchman. By exploring the definition of ”breaking news” in the contemporary online newsrooms of three Danish news organisations, the author offers us a long overdue re...

Liquid metal cooled fast breeder nuclear reactors

International Nuclear Information System (INIS)

Duncombe, E.; Thatcher, G.

1979-01-01

The invention described relates to a liquid metal cooled fast breeder nuclear reactor in which the fuel assembly has an inner zone comprised mainly of fissile material and a surrounding outer zone comprised mainly of breeder material. According to the invention the sub-assemblies in the outer zone include electro-magnetic braking devices (magnets, pole pieces and armature) for regulating the flow of coolant through the sub-assemblies. The magnetic fields of the electro-magnetic breaking devices are temperature sensitive so that as the power output of the breeder sub-assemblies increases the electro-magnetic resistance to coolant flow is reduced thereby maintaining the temperature of the coolant outlets from the sub-assemblies substantially constant. (UK)

76 FR 45334 - Innovative Techniques for Delivering ITS Learning; Request for Information

Science.gov (United States)

2011-07-28

... adult learners? 5. Are you aware of any ITS training applications that work on a mobile phone or smart... DEPARTMENT OF TRANSPORTATION Research and Innovative Technology Administration Innovative Techniques for Delivering ITS Learning; Request for Information AGENCY: Research and Innovative Technology...

Selective breaking of bonds in water with intense, 2-cycle, infrared laser pulses

Energy Technology Data Exchange (ETDEWEB)

Mathur, D., E-mail: atmol1@tifr.res.in; Dharmadhikari, A. K. [Tata Institute of Fundamental Research, 1 Homi Bhabha Road, Mumbai 400 005 (India); Dota, K. [Tata Institute of Fundamental Research, 1 Homi Bhabha Road, Mumbai 400 005 (India); Centre for Atomic and Molecular Physics, Manipal University, Manipal 576 104 (India); Dey, D.; Tiwari, A. K. [Indian Institute of Science Education and Research Kolkata, Mohanpur 741 246 (India); Dharmadhikari, J. A. [Centre for Atomic and Molecular Physics, Manipal University, Manipal 576 104 (India); De, S. [Saha Institute of Nuclear Physics, Bidhan Nagar, Kolkata 700 064 (India); Vasa, P. [Department of Physics, Indian Institute of Technology Bombay, Mumbai 400 076 (India)

2015-12-28

One of the holy grails of contemporary science has been to establish the possibility of preferentially breaking one of several bonds in a molecule. For instance, the two O–H bonds in water are equivalent: given sufficient energy, either one of them is equally likely to break. We report bond-selective molecular fragmentation upon application of intense, 2-cycle pulses of 800 nm laser light: we demonstrate up to three-fold enhancement for preferential bond breaking in isotopically substituted water (HOD). Our experimental observations are rationalized by means of ab initio computations of the potential energy surfaces of HOD, HOD{sup +}, and HOD{sup 2+} and explorations of the dissociation limits resulting from either O–H or O–D bond rupture. The observations we report present a formidable theoretical challenge that need to be taken up in order to gain insights into molecular dynamics, strong field physics, chemical physics, non-adiabatic processes, mass spectrometry, and time-dependent quantum chemistry.

Improving beam spectral and spatial quality by double-foil target in laser ion acceleration for ion-driven fast ignition

International Nuclear Information System (INIS)

Huang, Chenkun; Albright, Brian J.

2010-01-01

Mid-Z ion driven fast ignition inertial fusion requires ion beams of 100s of MeV energy and < 10% energy spread. An overdense run-scale foil target driven by a high intensity laser pulse can produce an ion beam that has attractive properties for this application. The Break Out Afterburner (BOA) is one laser-ion acceleration mechanism proposed to generate such beams, however the late stages of the BOA tend to produce too large of an energy spread. The spectral and spatial qualities of the beam quickly evolve as the ion beam and co-moving electrons continue to interact with the laser. Here we show how use of a second target foil placed behind a nm-scale foil can substantially reduce the temperature of the co-moving electrons and improve the ion beam energy spread. Particle-In-Cell simulations reveal the dynamics of the ion beam under control. Optimal conditions for improving the spectral and spatial spread of the ion beam is explored for current laser and target parameters, leading to generation of ion beams of energy 100s of MeV and 6% energy spread, a vital step for realizing ion-driven fast ignition.

Dynamics of the flood response to slow-fast landscape-climate feedbacks

Directory of Open Access Journals (Sweden)

R. A. P. Perdigão

2015-06-01

Full Text Available The dynamical evolution of the flood response to landscape-climate feedbacks is evaluated in a joint nonlinear statistical-dynamical approach. For that purpose, a spatiotemporal sensitivity analysis is conducted on hydrological data from 1976–2008 over 804 catchments throughout Austria, and a general, data-independent nonlinear dynamical model is built linking floods with climate (via precipitation, landscape (via elevation and their feedbacks. These involve nonlinear scale interactions, with landform evolution processes taking place at the millennial scale (slow dynamics, and climate adjusting in years to decades (fast dynamics. The results show that floods are more responsive to spatial (regional than to temporal (decadal variability. Catchments from dry lowlands and high wetlands exhibit similarity between the spatial and temporal sensitivities (spatiotemporal symmetry and low landscape-climate codependence, suggesting they are not coevolving significantly. However, intermediate regions show differences between those sensitivities (symmetry breaks and higher landscape-climate codependence, suggesting undergoing coevolution. The break of symmetry is an emergent behaviour from nonlinear feedbacks within the system. A new coevolution index is introduced relating spatiotemporal symmetry with relative characteristic celerities, which need to be taken into account in hydrological space-time trading. Coevolution is expressed here by the interplay between slow and fast dynamics, represented respectively by spatial and temporal characteristics. The dynamical model captures emerging features of the flood dynamics and nonlinear landscape-climate feedbacks, supporting the nonlinear statistical assessment of spatiotemporally asymmetric flood change. Moreover, it enables the dynamical estimation of flood changes in space and time from the given knowledge at different spatiotemporal conditions. This study ultimately brings to light emerging signatures of

The Fast Forward MBA in Project Management

CERN Document Server

Verzuh, Eric

2011-01-01

An updated and revised edition of the bestselling guide to managing projects For any professional responsible for coordinating projects among different departments, across executive levels, or with technical complexity, The Fast Forward MBA in Project Management offers comprehensive instruction on how to deliver on time and on budget. Get the step-by-step advice you need to find the right sponsor, clarify objectives, and set realistic schedules and budget projections. This Fourth Edition of the 200,000-copy bestseller now covers critical new topics including: software and IT projects, agile te

A Practical Framework Toward Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools.

Science.gov (United States)

Akseli, Ilgaz; Xie, Jingjin; Schultz, Leon; Ladyzhynsky, Nadia; Bramante, Tommasina; He, Xiaorong; Deanne, Rich; Horspool, Keith R; Schwabe, Robert

2017-01-01

Enabling the paradigm of quality by design requires the ability to quantitatively correlate material properties and process variables to measureable product performance attributes. Conventional, quality-by-test methods for determining tablet breaking force and disintegration time usually involve destructive tests, which consume significant amount of time and labor and provide limited information. Recent advances in material characterization, statistical analysis, and machine learning have provided multiple tools that have the potential to develop nondestructive, fast, and accurate approaches in drug product development. In this work, a methodology to predict the breaking force and disintegration time of tablet formulations using nondestructive ultrasonics and machine learning tools was developed. The input variables to the model include intrinsic properties of formulation and extrinsic process variables influencing the tablet during manufacturing. The model has been applied to predict breaking force and disintegration time using small quantities of active pharmaceutical ingredient and prototype formulation designs. The novel approach presented is a step forward toward rational design of a robust drug product based on insight into the performance of common materials during formulation and process development. It may also help expedite drug product development timeline and reduce active pharmaceutical ingredient usage while improving efficiency of the overall process. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Japanese experience with clinical trials of fast neutrons

International Nuclear Information System (INIS)

Tsunemoto, H.; Arai, T.; Morita, S.; Ishikawa, T.; Aoki, Y.; Takada, N.; Kamata, S.

1982-01-01

Between November, 1975 and November, 1981, 825 patients were treated with 30 MeV (d-Be) neutrons at the National Institute of Radiological Sciences, Chiba. At the Institute of Medical Science, Tokyo, 302 patients were referred to the Radiation Therapy department and were treated with 16 MeV (d-Be) neutrons. The emphasis of these clinical trials with fast neutrons was placed on the estimation of the effect of fast neutrons for locally advanced cancers or radioresistant cancers, and on evaluation of the rate of complication of normal tissues following irradiation with fast neutrons. Results were evaluated for patients with previously untreated cancer; local control of the tumor was observed in 59.1%. Complications requiring medical care developed in only 32 patients. Late reaction of soft tissue seemed to be more severe than that observed with photon beams. The results also suggest that for carcinoma of the larynx, esophagus, uterine cervix, Pancoast's tumor of the lung and osteosarcoma, fast neutrons were considered to be effectively applied in this randomized clinical trial. For carcinoma of the larynx, a fast neutron boost was effectively delivered, although an interstitial implant was necessarily combined with fast neutrons for carcinoma of the tongue. The cumulative survival rate of the patients with carcinoma of the esophagus treated with fast neutrons of 26% compared to the survival rate of 10.5% obtained using photons. The results also indicate that local control and relief of the symptom related to Pancoast's tumor of the lung seemed to be better with neutrons than with photons. For patients suffering from osteosarcoma, the surgical procedures preserving the function of the leg and arm were studied according to the better local control rate of the tumor following fast neutron beam therapy

The Fast Simulation Chain for ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00399337; The ATLAS collaboration; Marshall, Zach

2017-01-01

In order to generate the huge number of Monte Carlo events that will be required by the ATLAS experiment over the next several runs, a very fast simulation is critical. Fast detector simulation alone, however, is insufficient: with very high numbers of simultaneous proton-proton collisions expected in Run 3 and beyond, the digitization (detector response emulation) and event reconstruction time quickly become comparable to the time required for detector simulation. The ATLAS Fast Chain simulation has been developed to solve this problem. Modules are implemented for fast simulation, fast digitization, and fast track reconstruction. The application is sufficiently fast—several orders of magnitude faster than the standard simulation—that the simultaneous proton-proton collisions can be generated during the simulation job, so Pythia8 also runs concurrently with the rest of the algorithms. The Fast Chain has been built to be extremely modular and flexible, so that each sample can be custom-tailored to match th...

Method for detecting DNA strand breaks in mammalian cells using the Deinococcus radiodurans PprA protein

International Nuclear Information System (INIS)

Satoh, Katsuya; Wada, Seiichi; Kikuchi, Masahiro; Funayama, Tomoo; Narumi, Issay; Kobayashi, Yasuhiko

2006-01-01

In a previous study, we identified the novel protein PprA that plays a critical role in the radiation resistance of Deinococcus radiodurans. In this study, we focussed on the ability of PprA protein to recognize and bind to double-stranded DNA carrying strand breaks, and attempted to visualize radiation-induced DNA strand breaks in mammalian cultured cells by employing PprA protein using an immunofluorescence technique. Increased PprA protein binding to CHO-K1 nuclei immediately following irradiation suggests the protein is binding to DNA strand breaks. By altering the cell permeabilization conditions, PprA protein binding to CHO-K1 mitochondria, which is probably resulted from DNA strand break immediately following irradiation, was also detected. The method developed and detailed in this study will be useful in evaluating DNA damage responses in cultured cells, and could also be applicable to genotoxic tests in the environmental and pharmaceutical fields

Yukawa unification in moduli-dominant SUSY breaking

International Nuclear Information System (INIS)

Khalil, S.; Tatsuo Kobayashi

1997-07-01

We study Yukawa in string models with moduli-dominant SUSY breaking. This type of SUSY breaking in general leads to non-universal soft masses, i.e. soft scalar masses and gaugino masses. Such non-universality is important for phenomenological aspects of Yukawa unification, i.e., successful electroweak breaking, SUSY corrections to the bottom mass and the branching ratio of b → sγ. We show three regions in the whole parameter space which lead to successful electroweak breaking and allow small SUSY corrections to the bottom mass. For these three regions we investigated the b → sγ decay and mass spectra. (author). 26 refs, 6 figs

French regulatory practice and reflections on the leak-before-break concept

International Nuclear Information System (INIS)

Barrachin, B.; Jamet, P.

1986-01-01

For nuclear units in the design phase, the vendor (FRAMATOME) and the utility (EDF) examine the possibility of applying the leak-before-break criterion to a certain number of circuits, particularly the primary circuit and various parts of the secondary circuit. EDF has not completed its reflection on the leak-before-break approach and consequently, French safety authorities have not been officially notified of any request for assessment of the acceptability of such an approach. Nevertheless, from a strict safety point of view, it is possible to determine minimal conditions required in the implementation of such a course of action. Firstly, removing pipe breaks from the design basis of the plant will significantly weaken the application of the defense in-depth concept. This must be counter-balanced by reinforced manufacturing non destructive examinations and a stringent in-service inspection. Secondly, the demonstration of the existence of leaks before breaks must be obtained with a high degree of certainty, which requires large investments in a certain number of fields. The exact methodology will be defined by the Vendor and the utility at a later stage. However, from our point of view, analysis should involve the following steps: Definition of a maximum size defect; analysis of evolution under normal loads; stability analysis, definition of the critical defect; Definition of the detectable defect. This paper develops each of these points, and specifies, for each discipline, the domains in which present knowledge must be expanded and deepened [fr

Jet simulations and gamma-ray burst afterglow jet breaks

NARCIS (Netherlands)

van Eerten, H.J.; Meliani, Z.; Wijers, R.A.M.J.; Keppens, R.

2011-01-01

The conventional derivation of the gamma-ray burst afterglow jet break time uses only the blast wave fluid Lorentz factor and therefore leads to an achromatic break. We show that in general gamma-ray burst afterglow jet breaks are chromatic across the self-absorption break. Depending on

Jet simulations and gamma-ray burst afterglow jet breaks

NARCIS (Netherlands)

van Eerten, H. J.; Meliani, Z.; Wijers, R.A.M.J.; Keppens, R.

2010-01-01

The conventional derivation of the gamma-ray burst afterglow jet break time uses only the blast wave fluid Lorentz factor and therefore leads to an achromatic break. We show that in general gamma-ray burst afterglow jet breaks are chromatic across the self-absorption break. Depending on

Charge-symmetry-breaking nucleon form factors

International Nuclear Information System (INIS)

Kubis, Bastian

2011-01-01

A quantitative understanding of charge-symmetry breaking is an increasingly important ingredient for the extraction of the nucleon’s strange vector form factors. We review the theoretical understanding of the charge-symmetry-breaking form factors, both for single nucleons and for 4 He.

Diet restriction in Ramadan and the effect of fasting on glucose levels in pregnancy.

Science.gov (United States)

Baynouna Al Ketbi, Latifa Mohammad; Niglekerke, Nico J D; Zein Al Deen, Sanna M; Mirghani, Hisham

2014-06-24

Maternal diet restriction might be associated with adverse maternal and perinatal outcomes due to metabolic changes. This study aimed to investigate the prevalence of changes in glucose levels due to Ramadan fasting in Emirati pregnant women. We conducted a cross-sectional observational study of 150 women from the United Arab Emirates, (76 during Ramadan and 74 after Ramadan), with uncomplicated pregnancies at a gestational age between 20 and 36 weeks. The two groups of pregnant women had similar physiological parameters. Using the oral glucose tolerance test, the mean random blood glucose level after 1 hour of breaking the fast was significantly higher (p = 0.002) in the Ramadan fasting group than in the control group, and this was not affected by the number of fasting days. In 50% of patients after Ramadan and 70.5% during Ramadan, this value was more than 6.7 mmol/l, which is high and not an acceptable postprandial level in pregnancy. Caregivers need to consider the 1-hour postprandial glucose level response after fasting in Muslim pregnant women. Research of an interventional design is required to determine remedial actions for this issue.

Implications of career break from personal and company perspectives

OpenAIRE

Vuorinen, Niina

2017-01-01

The objective of this study is to show the implications that career breaks have on individuals and employers. The intensions are to identify personal motivations for career breaks, and if the breaks change the careers of the people taking them. Furthermore, this study intends to understand how career breaks are viewed by employers, and if career breaks are becoming more acceptable internationally. The theoretical framework was based on description of work and careers both from employee an...

Stock market speculation: Spontaneous symmetry breaking of economic valuation

Science.gov (United States)

Sornette, Didier

2000-09-01

Firm foundation theory estimates a security's firm fundamental value based on four determinants: expected growth rate, expected dividend payout, the market interest rate and the degree of risk. In contrast, other views of decision-making in the stock market, using alternatives such as human psychology and behavior, bounded rationality, agent-based modeling and evolutionary game theory, expound that speculative and crowd behavior of investors may play a major role in shaping market prices. Here, we propose that the two views refer to two classes of companies connected through a "phase transition". Our theory is based on (1) the identification of the fundamental parity symmetry of prices (p→-p), which results from the relative direction of payment flux compared to commodity flux and (2) the observation that a company's risk-adjusted growth rate discounted by the market interest rate behaves as a control parameter for the observable price. We find a critical value of this control parameter at which a spontaneous symmetry-breaking of prices occurs, leading to a spontaneous valuation in absence of earnings, similarly to the emergence of a spontaneous magnetization in Ising models in absence of a magnetic field. The low growth rate phase is described by the firm foundation theory while the large growth rate phase is the regime of speculation and crowd behavior. In practice, while large "finite-time horizon" effects round off the predicted singularities, our symmetry-breaking speculation theory accounts for the apparent over-pricing and the high volatility of fast growing companies on the stock markets.

Being Disruptive: How Open Growth is Delivering Effective Social Change at a Fast Pace

Directory of Open Access Journals (Sweden)

Delyse Sylvester

2012-07-01

Full Text Available Both innovators and funders need tools that map the entire constellation of solutions in a sector. Innovators, often labeled and isolated as system disruptors, need to be linked with their global peers offering and seeking each others proven strategies to accelerate positive change. The impact investing space needs a simple, open, and transparent way to find, convene, support, and track the progress of innovators. This article describes how the Ashoka Changemakers.com online community creates a space for: investors to find and support multiple innovations; social innovators to find each other, work together, and source funds; and disruptive innovations to grow over time where disruptive change is needed, fast. Crowd-sourcing, transparency, and open growth are keys to accelerating large-scale change and creating a world of changemakers.

Duality, exchange-degeneracy breaking, and exotic states

International Nuclear Information System (INIS)

Goldstein, G.R.; Haridas, P.

1979-01-01

We study the connection between exchange-degeneracy breaking and multiquark states within the framework of a highly constrained dual approach. We show that M 4 (baryonium) states emerge at the daughter trajectory level as a consequence of small exchange-degeneracy breaking in the meson-meson system (approx.delta) and larger exchange-degeneracy breaking of the baryon trajectories in the meson-baryon system (approx.epsilon). The M 4 states are coupled weakly to external mesons in proportion to the breaking parameter delta. Assuming M 4 couplings to B-barB channels are strong, as determined by duality with normal mesons in the B-barB system, consistency requires epsilon approx. √delta-bar, thereby relating the larger breaking of baryon trajectories to the violation of the Okubo-Zweig-Iizuka-type rule for M 4 . It is shown that exotic baryon states, B 5 , also emerge from this scheme at the daughter level and that dibaryons will appear at the second daughter level

Rotational Symmetry Breaking in Baby Skyrme Models

Science.gov (United States)

Karliner, Marek; Hen, Itay

We discuss one of the most interesting phenomena exhibited by baby skyrmions - breaking of rotational symmetry. The topics we will deal with here include the appearance of rotational symmetry breaking in the static solutions of baby Skyrme models, both in flat as well as in curved spaces, the zero-temperature crystalline structure of baby skyrmions, and finally, the appearance of spontaneous breaking of rotational symmetry in rotating baby skyrmions.

Charge-symmetry-breaking nucleon form factors

Energy Technology Data Exchange (ETDEWEB)

Kubis, Bastian, E-mail: kubis@hiskp.uni-bonn.de [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie) and Bethe Center for Theoretical Physics (Germany)

2011-11-15

A quantitative understanding of charge-symmetry breaking is an increasingly important ingredient for the extraction of the nucleon's strange vector form factors. We review the theoretical understanding of the charge-symmetry-breaking form factors, both for single nucleons and for {sup 4}He.

Explicit symmetry breaking in electrodynamic systems and electromagnetic radiation

CERN Document Server

Sinha, Dhiraj

2016-01-01

This book is an introduction to the concept of symmetries in electromagnetism and explicit symmetry breaking. It begins with a brief background on the origin of the concept of symmetry and its meaning in fields such as architecture, mathematics and physics. Despite the extensive developments of symmetry in these fields, it has yet to be applied to the context of classical electromagnetism and related engineering applications. This book unravels the beauty and excitement of this area to scientists and engineers.

Application of fast neutron radiography to three-dimensional visualization of steady two-phase flow in a rod bundle

CERN Document Server

Takenaka, N; Fujii, T; Mizubata, M; Yoshii, K

1999-01-01

Three-dimensional void fraction distribution of air-water two-phase flow in a 4x4 rod-bundle near a spacer was visualized by fast neutron radiography using a CT method. One-dimensional cross sectional averaged void fraction distribution was also calculated. The behaviors of low void fraction (thick water) two-phase flow in the rod bundle around the spacer were clearly visualized. It was shown that the void fraction distributions were visualized with a quality similar to those by thermal neutron radiography for low void fraction two-phase flow which is difficult to visualize by thermal neutron radiography. It is concluded that the fast neutron radiography is efficiently applicable to two-phase flow studies.

Controlling break-the-glass through alignment

NARCIS (Netherlands)

Adriansyah, A.; Dongen, van B.F.; Zannone, N.

2013-01-01

Modern IT systems have to deal with unpredictable situations and exceptions more and more often. In contrast, security mechanisms are usually very rigid. Functionality like break-the-glass is thus employed to allow users to bypass security mechanisms in case of emergencies. However, break-the-glass

The hidden X-ray breaks in afterglow light curves

International Nuclear Information System (INIS)

Curran, P. A.; Wijers, R. A. M. J.; Horst, A. J. van der; Starling, R. L. C.

2008-01-01

Gamma-Ray Burst (GRB) afterglow observations in the Swift era have a perceived lack of achromatic jet breaks compared to the BeppoSAX, or pre-Swift era. Specifically, relatively few breaks, consistent with jet breaks, are observed in the X-ray light curves of these bursts. If these breaks are truly missing, it has serious consequences for the interpretation of GRB jet collimation and energy requirements, and the use of GRBs as standard candles.Here we address the issue of X-ray breaks which are possibly 'hidden' and hence the light curves are misinterpreted as being single power-laws. We show how a number of precedents, including GRB 990510 and GRB 060206, exist for such hidden breaks and how, even with the well sampled light curves of the Swift era, these breaks may be left misidentified. We do so by synthesising X-ray light curves and finding general trends via Monte Carlo analysis. Furthermore, in light of these simulations, we discuss how to best identify achromatic breaks in afterglow light curves via multi-wavelength analysis

Development of technique for estimating primary cooling system break diameter in predicting nuclear emergency event sequence

International Nuclear Information System (INIS)

Tatebe, Yasumasa; Yoshida, Yoshitaka

2012-01-01

If an emergency event occurs in a nuclear power plant, appropriate action is selected and taken in accordance with the plant status, which changes from time to time, in order to prevent escalation and mitigate the event consequences. It is thus important to predict the event sequence and identify the plant behavior resulting from the action taken. In predicting the event sequence during a loss-of-coolant accident (LOCA), it is necessary to estimate break diameter. The conventional method for this estimation is time-consuming, since it involves multiple sensitivity analyses to determine the break diameter that is consistent with the plant behavior. To speed up the process of predicting the nuclear emergency event sequence, a new break diameter estimation technique that is applicable to pressurized water reactors was developed in this study. This technique enables the estimation of break diameter using the plant data sent from the safety parameter display system (SPDS), with focus on the depressurization rate in the reactor cooling system (RCS) during LOCA. The results of LOCA analysis, performed by varying the break diameter using the MAAP4 and RELAP5/MOD3.2 codes, confirmed that the RCS depressurization rate could be expressed by the log linear function of break diameter, except in the case of a small leak, in which RCS depressurization is affected by the coolant charging system and the high-pressure injection system. A correlation equation for break diameter estimation was developed from this function and tested for accuracy. Testing verified that the correlation equation could estimate break diameter accurately within an error of approximately 16%, even if the leak increases gradually, changing the plant status. (author)

The latest from the LHC: a well-deserved break

CERN Multimedia

CERN Bulletin

2010-01-01

A long and successful period of beam operation came to an end as scheduled on Monday 6 December . Since the first beam of 2010 was injected into the LHC on 28 February, a huge amount of progress has been made. After a technical stop of a few weeks coinciding with the end-of-year break, the LHC hardware systems will be restarted in January to be ready for the first beam of 2011 around 21 February.   The majority of the year has been dedicated to proton operation, with three distinct phases; (i) few (up to 13) low intensity bunches; (ii) a few (up to 50) high intensity bunches; (iii) many (almost 400) high intensity bunches using the bunch train scheme with 150 ns spacing. With peak luminosities of 2×1032 cm-2 s-1 and almost 50 pb-1 of integrated luminosity delivered to the experiments by late October, attention switched to operation with ions, in November After a rapid re-commissioning of the machine with ions, the physics run started on 8 November and continued for 4 weeks. The number ...

FastBit: Interactively Searching Massive Data

Energy Technology Data Exchange (ETDEWEB)

Wu, Kesheng; Ahern, Sean; Bethel, E. Wes; Chen, Jacqueline; Childs, Hank; Cormier-Michel, Estelle; Geddes, Cameron; Gu, Junmin; Hagen, Hans; Hamann, Bernd; Koegler, Wendy; Lauret, Jerome; Meredith, Jeremy; Messmer, Peter; Otoo, Ekow; Perevoztchikov, Victor; Poskanzer, Arthur; Prabhat,; Rubel, Oliver; Shoshani, Arie; Sim, Alexander; Stockinger, Kurt; Weber, Gunther; Zhang, Wei-Ming

2009-06-23

As scientific instruments and computer simulations produce more and more data, the task of locating the essential information to gain insight becomes increasingly difficult. FastBit is an efficient software tool to address this challenge. In this article, we present a summary of the key underlying technologies, namely bitmap compression, encoding, and binning. Together these techniques enable FastBit to answer structured (SQL) queries orders of magnitude faster than popular database systems. To illustrate how FastBit is used in applications, we present three examples involving a high-energy physics experiment, a combustion simulation, and an accelerator simulation. In each case, FastBit significantly reduces the response time and enables interactive exploration on terabytes of data.

Lifshitz-sector mediated SUSY breaking

OpenAIRE

Pospelov, MaximDepartment of Physics and Astronomy, University of Victoria, Victoria, BC, V8P 5C2, Canada; Tamarit, Carlos(Perimeter Institute for Theoretical Physics, Waterloo, ON, N2L 2Y5, Canada)

2014-01-01

We propose a novel mechanism of SUSY breaking by coupling a Lorentz-invariant supersymmetric matter sector to non-supersymmetric gravitational interactions with Lifshitz scaling. The improved UV properties of Lifshitz propagators moderate the otherwise uncontrollable ultraviolet divergences induced by gravitational loops. This ensures that both the amount of induced Lorentz violation and SUSY breaking in the matter sector are controlled by $ {{{\\Lambda_{\\mathrm{HL}}^2}} \\left/ {{M_P^2}} \\righ...

Evaluation of the effects of Islamic fasting on the biochemical markers of health.

Directory of Open Access Journals (Sweden)

Akbar Ali Babaei

2016-07-01

Full Text Available Introduction: Ramadan is the ninth month of the lunar Islamic calendar, during which Muslims are obliged to perform specific rites and rituals. Fasting is considered the most important ritual during the holy month of Ramadan. Fasting variably influences the health of individuals, which could be attributed to the changes in the concentrations of certain biochemical markers. This study aimed to elucidate the health effects of fasting through evaluating the impact of this Islamic duty on blood biochemistry. Materials and Methods: This quasi-experimental study was conducted on 40 male volunteers employed at North Khorasan University of Medical Sciences, Iran.Data collection and phlebotomy were performed before fast breaking(Iftar on the first and last day of Ramadan. Fasting duration was 11 hours per day. Serum biochemical factors, including blood glucose, uric acid, albumin, low-density lipoprotein(LDL, high-density lipoprotein (HDL, total cholesterol and triglyceride(TG, were measured in all the participants at the beginning and end of Ramadan. Data analysis was performed in SPSS using paired-samples T-test to compare the mean variables. Results: Mean age of the participants in this study was 39.11±8.602 years. After one month of fasting, a significant reduction was observed in the mean levels of blood glucose, uric acid, TG, and LDL(P

Compound Poisson Processes and Clustered Damage of Radiation Induced DNA Double Strand Breaks

International Nuclear Information System (INIS)

Gudowska-Nowak, E.; Ritter, S.; Taucher-Scholz, G.; Kraft, G.

2000-01-01

Recent experimental data have demonstrated that DNA damage induced by densely ionizing radiation in mammalian cells is distributed along the DNA molecule in the form of clusters. The principal constituent of DNA damage are double-strand breaks (DSB) which are formed when the breaks occur in both DNA strands and are directly opposite or separated by only a few base pairs. DSBs are believed to be most important lesions produced in chromosomes by radiation; interaction between DSBs can lead to cell killing, mutation or carcinogenesis. The paper discusses a model of clustered DSB formation viewed in terms of compound Poisson process along with the predictive essay of the formalism in application to experimental data. (author)

Psychologists at the Gate: Review of Daniel Kahneman’s Thinking, Fast and Slow

OpenAIRE

Shleifer, Andrei

2012-01-01

The publication of Daniel Kahneman's book, Thinking, Fast and Slow , is a major intellectual event. The book summarizes, but also integrates, the research that Kahneman has done over the past forty years, beginning with his path-breaking work with the late Amos Tversky. The broad theme of this research is that human beings are intuitive thinkers and that human intuition is imperfect, with the result that judgments and choices often deviate substantially from the predictions of normative stati...

Application of the Fast Fourier Transform Based Method to assist in the qualification process for the PSB-VVER1000 RELAP5 nodalisation

International Nuclear Information System (INIS)

Muellner, N.; Seidelberger, E.; Del Nevo, A.; D'Auria, F.

2005-01-01

One dimensional Thermal-Hydraulic-System (TH-SYS) codes like RELAP5 provide a degree of freedom that is significantly greater than desired. An undisciplined code user with some experience usually can achieve any pre-set results by tuning the nodalization. To take some freedom away from the user and achieve code user independent results several strategies were adopted. The approach of the UNIPI is to develop a multi purpose nodalization which must pass a rigorous nodalization qualification process. A qualified nodalization is also the basis to apply the Uncertainty Methodology based on Accuracy Extrapolation (UMAE) or to develop the accuracy database and to apply the Code with capability of Internal Assessment of Uncertainty (CIAU). An important part of the nodalization qualification is to verify the results of the nodalization approach against experimental data. In this context the Fast Fourier Transform Based Method (FFTBM) provides an independent tool to assess the quantitative accuracy of the analysis. This paper will present a series of RELAP5 calculations, each assessed by the FFTBM, which analyze an experiment at the PSB-VVER1000 facility This experiment is a 0.7% Small Break (SB) Loss Of Coolant Accident (LOCA) in the Cold Leg (CL) near the Reactor Pressure Vessel (RPV). The FFTBM was used to establish a range in which parameters like power, break area or total heat losses can vary, while the nodalization is still qualified from a quantitative point of view. (author)

The application of the unmanned aerial vehicle remote sensing technology in the FAST project construction

Science.gov (United States)

Zhu, Boqin

2015-08-01

The purpose of using unmanned aerial vehicle (UAV) remote sensing application in Five-hundred-meter aperture spherical telescope (FAST) project is to dynamically record the construction process with high resolution image, monitor the environmental impact, and provide services for local environmental protection and the reserve immigrants. This paper introduces the use of UAV remote sensing system and the course design and implementation for the FAST site. Through the analysis of the time series data, we found that: (1) since the year 2012, the project has been widely carried out; (2) till 2013, the internal project begun to take shape;(3) engineering excavation scope was kept stable in 2014, and the initial scale of the FAST engineering construction has emerged as in the meantime, the vegetation recovery went well on the bare soil area; (4) in 2015, none environmental problems caused by engineering construction and other engineering geological disaster were found in the work area through the image interpretation of UAV images. This paper also suggested that the UAV technology need some improvements to fulfill the requirements of surveying and mapping specification., including a new data acquisition and processing measures assigned with the background of highly diverse elevation, usage of telephoto camera, hierarchical photography with different flying height, and adjustment with terrain using the joint empty three settlement method.

Application of the DRS chip for fast waveform digitizing

Energy Technology Data Exchange (ETDEWEB)

Ritt, Stefan, E-mail: stefan.ritt@psi.c [PSI, CH-5232 Villigen (Switzerland); Dinapoli, Roberto; Hartmann, Ueli [PSI, CH-5232 Villigen (Switzerland)

2010-11-01

The high demands of modern experiments in fast waveform digitizing led to the development of a whole family of switched capacitor arrays (SCA), called the Domino Ring Sampler (DRS). The most recent version, DRS4, is produced in a radiation hard 0.25 {mu}m CMOS process, and is capable of digitizing 9 differential input channels at sampling rates of up to 6 Giga-samples per second (GSPS) with an analogue bandwidth of 950 MHz (-3 dB). The channel depth can be configured between 1024 and 8192 cells, and the signal-to-noise ratio allows a resolution equivalent to more than 11 bits. Using an interleaved sampling technique, sampling rates up to 48 GSPS are possible. Compared with the previous versions, the DRS4 chip contains several improvements such as an on-chip PLL for sampling-frequency stabilization and various mechanisms to reduce the read out dead-time. The high bandwidth, low power consumption and short readout time make this chip attractive for many experiments, replacing traditional ADCs and TDCs. This includes time-of-flight detectors, cosmic gamma ray observatories, PET scanners and industrial applications.

Metal ion protection of DNA to fast neutron irradiation

International Nuclear Information System (INIS)

Constantinescu, B.; Bugoi, R.; Radulescu, I.; Radu, L.

1998-01-01

The most important effects of the ionising radiation are the single and double strand breaks (SSB and DBS), modifications of the DNA bases and deoxyribose, as well as the occurrence of alkali and heat labile sites (revealed as strand breaks after alkaline or thermic treatment of irradiated DNA). The ionising particles can have either direct effects on the DNA constituents or indirect effects, mediated by the OH - radicals, produced by water radiolysis. The occurrence of SSB and DSB in the chromatin DNA strands is supposed to hinder the DNA-dye complex formation. Usually, the dyes present different fluorescence parameters in the two possible states, so one can correlate the lifetime or the quantum yield with the extent of the damage. We took into account the protective effect offered both by histones, which behave as 'scavenger molecules' for OH - radicals and by the high compactness of DNA chromatin. Similar protective effects might be the results of the metallic ion addition which triggers some conformational transitions of the chromatin DNA towards a highly compacted structure. In this paper we present a study of the complexes of fast neutron irradiated chromatin with proflavine. Fluorimetric and time resolved spectroscopic determinations (single photon counting method) of chromatin-Pr complexes were realised. Information regarding the chromatin protein damage were obtained by monitoring the fluorescence of Trp. The chromatin was irradiated (20-100 Gy) with fast neutrons, obtained by the reaction of 13.5 MeV deuterons on a thick beryllium target at the IFIN-HH U-120 Cyclotron. The dose mean lineal energy in water at the point of interest was 50 keV/m and the mean dose rate was 1.5 Gy/min. By fluorescence determinations, changes of the Pr intercalation parameters in fast neutron irradiated chromatin DNA have been observed. Fluorescence techniques provide valuable information on the binding equilibrium by considering the radiation deexcitation of the complex. The

The effect of interruptions and breaks on insight and impasses: Do you need a break right now?

NARCIS (Netherlands)

Beeftink, F.; van Eerde, W.; Rutte, C.G.

2008-01-01

Some time away from a problem, or incubation time, is found to be beneficial to creative problem solving. But are interruptions as equally helpful as breaks? An experiment was conducted to gain more insight into the differences between imposed and self-initiated breaks, and their effects on

European development of ferritic-martensitic steels for fast reactor wrapper applications

International Nuclear Information System (INIS)

Bagley, K.; Little, E.A.; Levy, V.; Alamo, A.

1987-01-01

9-12%Cr ferritic-martensitic stainless steels are under development in Europe for fast reactor sub-assembly wrapper applications. Within this class of alloys, attention is focussed on three key specifications, viz. FV448 and DIN 1.4914 (both 10-12%CrMoVNb steels) and EM10 (an 8-10%Cr-0.15%C steel), which can be optimized to give acceptably low ductile-brittle transition characteristics. The results of studies on these steels, and earlier choices, covering heat treatment and compositional optimization, evolution of wrapper fabrication routes, pre and post-irradiation mechanical property and fracture toughness behaviour, microstructural stability, void swelling and in-reactor creep characteristics are reviewed. The retention of high void swelling to displacement doses in excess of 100 dpa in reactor irradiations reaffirms the selection of 9-12%Cr steels for on-going wrapper development. Moreover, irradiation-induced changes in mechanical properties (e.g. in-reactor creep and impact behaviour), measured to intermediate doses, do not give cause for concern; however, additional data to higher doses and at the lower irradiation temperatures of 370 0 -400 0 C are needed in order to fully endorse these alloys for high burnup applications in advanced reactor systems

Line-breaking algorithm enhancement in inverse typesetting paradigma

Directory of Open Access Journals (Sweden)

Jan Přichystal

2007-01-01

Full Text Available High quality text preparing using computer desktop publishing systems usually uses line-breaking algorithm which cannot make provision for line heights and typeset paragraph accurately when composition width, page break, line index or other object appears. This article deals with enhancing of line-breaking algorithm based on optimum-fit algorithm. This algorithm is enhanced with calculation of immediate typesetting width and thus solves problem of forced change. Line-breaking algorithm enhancement causes expansion potentialities of high-quality typesetting in cases that have not been yet covered with present typesetting systems.

Supersymmetry Breaking through Transparent Extra Dimensions

Energy Technology Data Exchange (ETDEWEB)

Schmaltz, Martin

1999-11-23

We propose a new framework for mediating supersymmetry breaking through an extra dimension. It predicts positive scalar masses and solves the supersymmetric flavor problem. Supersymmetry breaks on a ''source'' brane that is spatially separated from a parallel brane on which the standard model matter fields and their superpartners live. The gauge and gaugino fields propagate in the bulk, the latter receiving a supersymmetry breaking mass from direct couplings to the source brane. Scalar masses are suppressed at the high scale but are generated via the renormalization group. We briefly discuss the spectrum and collider signals for a range of compactification scales.

Application of artificial intelligence to the detection and diagnosis of core faults in fast reactors

International Nuclear Information System (INIS)

Le Guillou, G.; Berlin, C.; Parcy, J.P.

1983-01-01

An automatic diagnostic system designed specially for fuel assembly accidents in fast reactors of the French type is described. It has an ''expert system'' structure and, at the present stage of the project, is operating on a laboratory scale in an experimental unit (Solar 16/65). The software aspects of the development of such systems (structure and formulation of rules, language, etc.) are presented in detail. Various simulation tests are outlined. ''Real-time'' application of the system will begin in 1983 on the Phenix reactor. (author)

Concept of fast-track surgery and its application in perioperative period of hepatectomy for liver cancer

Directory of Open Access Journals (Sweden)

HAN Wei

2016-10-01

Full Text Available Fast-track surgery (FTS is widely used in the field of hepatopancreatobiliary surgery and has achieved a great success in the perioperative period of liver cancer. It has been recognized by clinical doctors and patients. This article introduces the concept of FTS, reviews its development, summarizes the detailed measures of FTS in the perioperative period of liver cancer and long-term application experience of FTS, and analyzes the current status of its clinical application. It is pointed out that when applied in the perioperative period of hepatectomy for liver cancer, FTS can reduce stress, lower the incidence of postoperative complications, shorten the length of hospital stay, and bring true benefits to patients.

Electroweak symmetry breaking in supersymmetric gauge-Higgs unification models

International Nuclear Information System (INIS)

Choi, Kiwoon; Jeong, Kwang-Sik; Okumura, Ken-ichi; Haba, Naoyuki; Shimizu, Yasuhiro; Yamaguchi, Masahiro

2004-01-01

We examine the Higgs mass parameters and electroweak symmetry breaking in supersymmetric orbifold field theories in which the 4-dimensional Higgs fields originate from higher-dimensional gauge supermultiplets. It is noted that such gauge-Higgs unification leads to a specific boundary condition on the Higgs mass parameters at the compactification scale, which is independent of the details of supersymmetry breaking mechanism. With this boundary condition, phenomenologically viable parameter space of the model is severely constrained by the condition of electroweak symmetry breaking for supersymmetry breaking scenarios which can be realized naturally in orbifold field theories. For instance, if it is assumed that the 4-dimensional effective theory is the minimal supersymmetric standard model with supersymmetry breaking parameters induced by the Scherk-Schwarz mechanism, a correct electroweak symmetry breaking can not be achieved for reasonable range of parameters of the model, even when one includes additional contributions to the Higgs mass parameters from the auxiliary component of 4-dimensional conformal compensator. However if there exists a supersymmetry breaking mediated by brane superfields, sizable portion of the parameter space can give a correct electroweak symmetry breaking. (author)

Schwinger Dyson equations: Dynamical chiral symmetry breaking and confinement

International Nuclear Information System (INIS)

Roberts, C.D.

1992-01-01

A representative but not exhaustive review of the Schwinger-Dyson equation (SDE) approach to the nonperturbative study of QCD is presented. The main focus is the SDE for the quark self energy but studies of the gluon propagator and quark-gluon vertex are also discussed insofar as they are important to the quark SDE. The scope of this article is the application of these equations to the study of dynamical chiral symmetry breaking, quark confinement and the phenomenology of the spectrum and dynamics of QCD

Methodological testing: Are fast quantum computers illusions?

Energy Technology Data Exchange (ETDEWEB)

Meyer, Steven [Tachyon Design Automation, San Francisco, CA (United States)

2013-07-01

Popularity of the idea for computers constructed from the principles of QM started with Feynman's 'Lectures On Computation', but he called the idea crazy and dependent on statistical mechanics. In 1987, Feynman published a paper in 'Quantum Implications - Essays in Honor of David Bohm' on negative probabilities which he said gave him cultural shock. The problem with imagined fast quantum computers (QC) is that speed requires both statistical behavior and truth of the mathematical formalism. The Swedish Royal Academy 2012 Nobel Prize in physics press release touted the discovery of methods to control ''individual quantum systems'', to ''measure and control very fragile quantum states'' which enables ''first steps towards building a new type of super fast computer based on quantum physics.'' A number of examples where widely accepted mathematical descriptions have turned out to be problematic are examined: Problems with the use of Oracles in P=NP computational complexity, Paul Finsler's proof of the continuum hypothesis, and Turing's Enigma code breaking versus William tutte's Colossus. I view QC research as faith in computational oracles with wished for properties. Arther Fine's interpretation in 'The Shaky Game' of Einstein's skepticism toward QM is discussed. If Einstein's reality as space-time curvature is correct, then space-time computers will be the next type of super fast computer.

Factors related to reduction in the consumption of fast food: application of the theory-based approaches

Directory of Open Access Journals (Sweden)

Zeinab Jalambadani

2017-09-01

Full Text Available Background. The Trans-Theoretical model (TTM and Theory of Planned Behaviour (TPB may be promising models for understanding and predicting reduction in the consumption of fast food. The aim of this study was to examine the applicability of the Trans-Theoretical model (TTM and the additional predictive role of the subjective norms and perceived behavioural control in predicting reduction consumption of fast food in obese Iranian adolescent girls. Materials and methods. A cross sectional study design was conducted among twelve randomly selected schools in Sabzevar, Iran from 2015 to 2017. Four hundred eighty five randomly selected students consented to participate in the study. Hierarchical regression models used to predict the role of important variables that can influence the reduction in the consumption of fast food among students. using SPSS version 22. Results. Variables Perceived behavioural control (r=0.58, P<0.001, Subjective norms (r=0.51, P<0.001, self-efficacy (r=0.49, P<0.001, decisional balance (pros (r=0.29, P<0.001, decisional balance (cons (r=0.25, P<0.001, stage of change (r=0.38, P<0.001, were significantly and positively correlated while experiential processes of change (r=0.08, P=0.135 and behavioural processes of change (r=0.09, P=0.145, were not significant.Conclusions. The study demonstrated that the TTM (except the experiential and behavioural processes of change focusing on the perceived behavioural control and subjective norms are useful models for reduction in the consumption of fast food.

The application of leak before break concepts piping of KWU-plants

International Nuclear Information System (INIS)

Bartholome, G.; Bieselt, R.W.

1985-01-01

The fracture of pipes with longitudinal and circumferential cracks was investigated by experiments and theoretical approaches (flow stress criteria and limit load analyses). The experiments show that the critical crack dimensions can conservatively be determined by fracture mechanics. The tests and calculations are applied to KWU primary coolant piping with hypothetical longitudinal and circumferential defects. Reactor systems, design, fabrication, stress analysis, material, non-destructive testing, quality control and inservice inspection are considered referring to the leak-before-break behaviour. On the basis of the extreme toughness of the materials, the known loads, the high level of non-destructive examinations, the leakage monitoring system and the high quality of manufacture and processing it is shown that a spontaneous failure need not be postulated. (orig.)

PWR cold-leg small break loca with faulty HPI

International Nuclear Information System (INIS)

Kumamaru, H.; Kukita, Y.

1991-01-01

The ROSA-IV Large Scale Test Facility (LSTF) is a 1/48 volumetrically-scaled model of a pressurized water reactor (PWR). At the LSTF are performed cold-leg small-break loss-of-coolant accident (LOCA) tests with faulty high pressure injection (HPI) system for break areas from 0.5% to 10% and an intentional primary system depressurization test following a small-break LOCA test. A simple prediction model is proposed for prediction of times of major events. Test data and calculations show that intentional primary system depressurization with use of the pressurizer power-operated relief valves (PORVs) is effective for break areas of approximately 0.5% or less, is unnecessary for breaks of 5% or more, and is insufficient for intermediate break areas to maintain adequate core cooling. (author)

Modeling patients' acceptance of provider-delivered e-health.

Science.gov (United States)

Wilson, E Vance; Lankton, Nancy K

2004-01-01

Health care providers are beginning to deliver a range of Internet-based services to patients; however, it is not clear which of these e-health services patients need or desire. The authors propose that patients' acceptance of provider-delivered e-health can be modeled in advance of application development by measuring the effects of several key antecedents to e-health use and applying models of acceptance developed in the information technology (IT) field. This study tested three theoretical models of IT acceptance among patients who had recently registered for access to provider-delivered e-health. An online questionnaire administered items measuring perceptual constructs from the IT acceptance models (intrinsic motivation, perceived ease of use, perceived usefulness/extrinsic motivation, and behavioral intention to use e-health) and five hypothesized antecedents (satisfaction with medical care, health care knowledge, Internet dependence, information-seeking preference, and health care need). Responses were collected and stored in a central database. All tested IT acceptance models performed well in predicting patients' behavioral intention to use e-health. Antecedent factors of satisfaction with provider, information-seeking preference, and Internet dependence uniquely predicted constructs in the models. Information technology acceptance models provide a means to understand which aspects of e-health are valued by patients and how this may affect future use. In addition, antecedents to the models can be used to predict e-health acceptance in advance of system development.

300 nm bandwidth adiabatic SOI polarization splitter-rotators exploiting continuous symmetry breaking.

Science.gov (United States)

Socci, Luciano; Sorianello, Vito; Romagnoli, Marco

2015-07-27

Adiabatic polarization splitter-rotators are investigated exploiting continuous symmetry breaking thereby achieving significant device size and losses reduction in a single mask fabrication process for both SOI channel and ridge waveguides. A crosstalk lower than -25 dB is expected over 300nm bandwidth, making the device suitable for full grid CWDM and diplexer/triplexer FTTH applications at 1310, 1490 and 1550nm.

Dirac neutrino masses from generalized supersymmetry breaking

International Nuclear Information System (INIS)

Demir, D.A.; Everett, L.L.; Langacker, P.

2007-12-01

We demonstrate that Dirac neutrino masses in the experimentally preferred range are generated within supersymmetric gauge extensions of the Standard Model with a generalized supersymmetry breaking sector. If the usual superpotential Yukawa couplings are forbidden by the additional gauge symmetry (such as a U(1) ' ), effective Dirac mass terms involving the ''wrong Higgs'' field can arise either at tree level due to hard supersymmetry breaking fermion Yukawa couplings, or at one-loop due to nonanalytic or ''nonholomorphic'' soft supersymmetry breaking trilinear scalar couplings. As both of these operators are naturally suppressed in generic models of supersymmetry breaking, the resulting neutrino masses are naturally in the sub-eV range. The neutrino magnetic and electric dipole moments resulting from the radiative mechanism also vanish at one-loop order. (orig.)

The Coulomb break-up of 9Be

International Nuclear Information System (INIS)

Macdonald, E.W.; Shotter, A.C.; Branford, D.; Rahighi, J.; Davinson, T.; Davis, N.J.

1992-01-01

Kinematically complete data is presented on the break-up reaction 120 Sn( 9 Be, 8 Be g.s +n) 120 Sn g.s. at E beam =90 MeV for several scattering angles inside the grazing angle. These data are compared with the predictions of a Coulomb break-up model. It is shown that the data can be understood in terms of the Coulomb model provided some account is taken of the interactions of the break-up fragments with the target. Analysis of the 9 Be break-up data, using radio-isotope measurements of the 9 Be(γ, n) cross-section, indicates that for this photo-disintegration reaction there is probably a significant direct component to the threshold cross-section, in addition to a threshold resonance at 1.69 MeV. (orig.)

mrsFAST-Ultra: a compact, SNP-aware mapper for high performance sequencing applications.

Science.gov (United States)

Hach, Faraz; Sarrafi, Iman; Hormozdiari, Farhad; Alkan, Can; Eichler, Evan E; Sahinalp, S Cenk

2014-07-01

High throughput sequencing (HTS) platforms generate unprecedented amounts of data that introduce challenges for processing and downstream analysis. While tools that report the 'best' mapping location of each read provide a fast way to process HTS data, they are not suitable for many types of downstream analysis such as structural variation detection, where it is important to report multiple mapping loci for each read. For this purpose we introduce mrsFAST-Ultra, a fast, cache oblivious, SNP-aware aligner that can handle the multi-mapping of HTS reads very efficiently. mrsFAST-Ultra improves mrsFAST, our first cache oblivious read aligner capable of handling multi-mapping reads, through new and compact index structures that reduce not only the overall memory usage but also the number of CPU operations per alignment. In fact the size of the index generated by mrsFAST-Ultra is 10 times smaller than that of mrsFAST. As importantly, mrsFAST-Ultra introduces new features such as being able to (i) obtain the best mapping loci for each read, and (ii) return all reads that have at most n mapping loci (within an error threshold), together with these loci, for any user specified n. Furthermore, mrsFAST-Ultra is SNP-aware, i.e. it can map reads to reference genome while discounting the mismatches that occur at common SNP locations provided by db-SNP; this significantly increases the number of reads that can be mapped to the reference genome. Notice that all of the above features are implemented within the index structure and are not simple post-processing steps and thus are performed highly efficiently. Finally, mrsFAST-Ultra utilizes multiple available cores and processors and can be tuned for various memory settings. Our results show that mrsFAST-Ultra is roughly five times faster than its predecessor mrsFAST. In comparison to newly enhanced popular tools such as Bowtie2, it is more sensitive (it can report 10 times or more mappings per read) and much faster (six times or

Musculoskeletal injuries in break-dancers.

Science.gov (United States)

Cho, Chul Hyun; Song, Kwang Soon; Min, Byung Woo; Lee, Sung Moon; Chang, Hyuk Won; Eum, Dae Seup

2009-11-01

Since no epidemiologic studies have been reported about musculoskeletal injuries in break-dancers, there are no data on the rates and patterns of musculoskeletal injuries in this population that clinicians can use to find ways to decrease injury rate. We believe that the incidence of injuries in break-dancers is higher than assumed and that injury rates and patterns differ between professional and amateur dancers. Descriptive epidemiologic study. Of a total of 42 study subjects, 23 were professional dancers and 19 were amateur dancers. Injury frequency, site and type, along with the presence of supervised training, the use of protective devices and warm-up exercises done were recorded. Of the 42 study subjects, excluding two amateur dancers, 40 (95.2%) had had musculoskeletal injuries at more than one site. The mean number of sites per dancer was 4.60. The frequency of injury depended on the site and was as follows: wrist (69.0%), finger (61.9%), knee (61.9%), shoulder (52.4%), lumbar spine (50.0%), elbow (42.9%), cervical spine (38.1%), ankle (38.1%), foot (28.6%) and hip (16.7%). Sprain, strain and tendinitis were the most common injuries, accounting for the most cases. Of the 42 dancers, 13 (31%) had had fractures or dislocations. Eight (19.1%) learned break-dancing under supervised instruction, 17 (40.5%) used protective devices and 28 (66.7%) performed warm-up exercises before dancing. There were significant differences in age, dance career length, amount of dance training, mean number of injury sites and the presence of supervised training between professionals and amateurs (Pnature of the activities that result in both unusual and common injuries in break-dancers and educate them about safety. Careful screening, instruction and supervised training of break-dancers will help to prevent injuries.

SUSY breaking mediation by throat fields

International Nuclear Information System (INIS)

Bruemmer, F.; Hebecker, A.; Trapletti, M.

2006-01-01

We investigate, in the general framework of KKLT, the mediation of supersymmetry breaking by fields propagating in the strongly warped region of the compactification manifold ('throat fields'). Such fields can couple both to the supersymmetry breaking sector at the IR end of the throat and to the visible sector at the UV end. We model the supersymmetry breaking sector by a chiral superfield which develops an F term vacuum expectation value (also responsible for the uplift). It turns out that the mediation effect of vector multiplets propagating in the throat can compete with modulus-anomaly mediation. Moreover, such vector fields are naturally present as the gauge fields arising from isometries of the throat (most notably the SO(4) isometry of the Klebanov-Strassler solution). Their mediation effect is important in spite of their large 4d mass. The latter is due to the breaking of the throat isometry by the compact manifold at the UV end of the throat. The contribution from heavy chiral superfields is found to be subdominant

[Groups of statutory bodies and evaluation of health recovery programmes for mothers and their child(ren) - An application of a time-based break-even analysis].

Science.gov (United States)

Schönig, W

2002-01-01

Public and private expenditure in health recovery programmes for mothers and their children is stagnating. A focal point to turn around this trend is to convince the responsible statury bodies by proving both effectiveness and efficiency of these programmes. The paper suggests the application of the break-even analysis on a time-based principle. A primary calculation with the data of a major German evaluation shows significant savings if the success of the health recovery programmes holds for at least 1.19 years. Available data does not cover such a long period.

ANALISA BREAK EVENT POINT (BEP TERHADAP LABA PERUSAHAAN

Directory of Open Access Journals (Sweden)

Muhammad Yusuf

2015-09-01

Full Text Available Break event point or the break-even point can be defined as a situation where the operating company does not make a profit and not a loss. The goal is to provide the knowledge to increase knowledge about the break event point (the point of principal and its relationship with the company profit and to know how the results of the. Analysis break event point is very important for the leadership of the company to determine the production rate how much the cost will be equal to the amount of sales or in other words to determine the break event point we will determine the relationship between sales, production, selling price, cost, loss or profit, making it easier for leaders to take discretion.DOI: 10.15408/ess.v4i1.1955 

Fast neutron therapy in advanced malignant tumour treatment

International Nuclear Information System (INIS)

Avinc, A.

1998-01-01

In this report the fast neutron therapy applications were examined by thoroughly consideration of the fast neutron sources and the interactions of the fast neutron by the medium. The efficacy of fast neutron radiotherapy with that of patients with locally advanced tumours were compared. Radiological data indicate that fast neutrons could bring benefit in the treatment of some tumour types especially salivary glands, paranasal sinuses, soft tissue sarcomas, prostatic adenocarcinomas, palliative treatment of melanoma and rectum. There is a significant improvement in local/regional control for the neutron group, but no improvement in the survival. The neutron therapy is suggested through which this benefit could be achieved

Fast evaluation of the Rayleigh integral and applications to inverse acoustics

NARCIS (Netherlands)

Wind, Jelmer; Wijnant, Ysbrand H.; de Boer, Andries

2006-01-01

In this paper we present a fast evaluation of the Rayleigh integral, which leads to fast and robust solutions in inverse acoustics. The method commonly used to reconstruct acoustic sources on a plane in space is Planar Nearfield Acoustic Holography (PNAH). Some of the most important recent

A French guideline for defect assessment at elevated temperature and leak before break analysis

International Nuclear Information System (INIS)

Drubay, B.; Chapuliot, St.; Lacire, M.H.; Marie, St.; Deschanels, H.; Cambefort, P.

2001-01-01

A large program is performed in France in order to develop, for the design and operating FBR (fast breeder reactor) plants, defect assessment procedures and Leak-Before-Break methods (L.B.B.). The main objective of this A16 guide is to propose analytical solutions at elevated temperature coherent with those proposed at low temperature by the RSE-M. The main items developed in this A16 guide for laboratory specimen, plates, pipes and elbows are the following: evaluation of ductile crack initiation and crack propagation based on the J parameter and material characteristics as J R -Δa curve or J i /G fr . Algorithms to evaluate the maximum endurable load under increasing load for through wall cracks or surface cracks are also proposed; determination of fatigue or creep-fatigue crack initiation based on the σ approach calculating stress and strain at a characteristic distance d from the crack tip; evaluation of fatigue crack growth based on da/dN-ΔK eff relationship with a ΔK eff derived from a simplified estimation of ΔJ for the cyclic load; evaluation of creep-fatigue crack growth adding the fatigue crack growth and the creep crack growth during the hold time derived from a simplified evaluation of C * ; Leak-Before-Break procedure. The fracture mechanic parameters determined in the A16 guide (K 1 , J, C * ) are derived from handbooks and formula in accordance with those proposed in the RSE-M document for in service inspection. Those are: the K I handbook for a large panel of surface and through-wall defect in plates, pipes and elbows; elastic stress and reference stress formula; analytical Js and Cs * formulations for mechanical and through thickness thermal load. The main part of the formula and assessment methodologies proposed in the A16 guide are included in a software, called MJSAM, developed under the MS Windows environment in support of the document. This allows a simple application of the analysis proposed in the document. (authors)

A French guideline for defect assessment at elevated temperature and leak before break analysis

Energy Technology Data Exchange (ETDEWEB)

Drubay, B.; Chapuliot, St.; Lacire, M.H.; Marie, St. [CEA Saclay, Lab. d' Ingegrite des Structures et Normalisation, LISN, 91 - Gif sur Yvette (France); Deschanels, H. [FRAMATOME/Novatome, 69 - Lyon (France); Cambefort, P. [Electricite de France (EDF/SEPTEN), 69 - Lyon (France)

2001-07-01

A large program is performed in France in order to develop, for the design and operating FBR (fast breeder reactor) plants, defect assessment procedures and Leak-Before-Break methods (L.B.B.). The main objective of this A16 guide is to propose analytical solutions at elevated temperature coherent with those proposed at low temperature by the RSE-M. The main items developed in this A16 guide for laboratory specimen, plates, pipes and elbows are the following: evaluation of ductile crack initiation and crack propagation based on the J parameter and material characteristics as J{sub R}-{delta}a curve or J{sub i}/G{sub fr}. Algorithms to evaluate the maximum endurable load under increasing load for through wall cracks or surface cracks are also proposed; determination of fatigue or creep-fatigue crack initiation based on the {sigma} approach calculating stress and strain at a characteristic distance d from the crack tip; evaluation of fatigue crack growth based on da/dN-{delta}K{sub eff} relationship with a {delta}K{sub eff} derived from a simplified estimation of {delta}J for the cyclic load; evaluation of creep-fatigue crack growth adding the fatigue crack growth and the creep crack growth during the hold time derived from a simplified evaluation of C{sup *}; Leak-Before-Break procedure. The fracture mechanic parameters determined in the A16 guide (K{sub 1}, J, C{sup *}) are derived from handbooks and formula in accordance with those proposed in the RSE-M document for in service inspection. Those are: the K{sub I} handbook for a large panel of surface and through-wall defect in plates, pipes and elbows; elastic stress and reference stress formula; analytical Js and Cs{sup *} formulations for mechanical and through thickness thermal load. The main part of the formula and assessment methodologies proposed in the A16 guide are included in a software, called MJSAM, developed under the MS Windows environment in support of the document. This allows a simple application of

Generic evaluation of feedwater transients and small break loss-of-coolant accidents in GE-designed operating plants and near-term operating license applications

International Nuclear Information System (INIS)

1980-01-01

The results are presented of a generic evaluation of feedwater transients, small-break loss-of-coolant accidents (LOCAs), and other TMI-2-related events for General Electric Company (GE)-designed operating plants and near-term operating license applications to confirm or establish the bases for the continued safe operation of the operating plants. The results of this evaluation are presented in this report in the form of a set of findings and recommendations in each of the principal review areas. Additional review of the accident is continuing and further information is being obtained and evaluated. Any new information will be reviewed and modifications will be made as appropriate

The structure of GUT breaking by orbifolding

International Nuclear Information System (INIS)

Hebecker, Arthur; March-Russell, John

2002-01-01

Recently, an attractive model of GUT breaking has been proposed in which a 5-dimensional supersymmetric SU(5) gauge theory on an S 1 /(Z 2 xZ 2 ') orbifold is broken down to the 4d MSSM by SU(5)-violating boundary conditions. Motivated by this construction and several related realistic models, we investigate the general structure of orbifolds in the effective field theory context, and of this orbifold symmetry breaking mechanism in particular. An analysis of the group theoretic structure of orbifold breaking is performed. This depends upon the existence of appropriate inner and outer automorphisms of the Lie algebra, and we show that a reduction of the rank of the GUT group is possible. Some aspects of larger GUT theories based on SO(10) and E 6 are discussed. We explore the possibilities of defining the theory directly on a space with boundaries and breaking the gauge symmetry by more general consistently chosen boundary conditions for the fields. Furthermore, we derive the relation of orbifold breaking with the familiar mechanism of Wilson line breaking, finding a one-to-one correspondence, both conceptually and technically. Finally, we analyse the consistency of orbifold models in the effective field theory context, emphasizing the necessity for self-adjoint extensions of the Hamiltonian and other conserved operators, and especially the highly restrictive anomaly cancellation conditions that apply if the bulk theory lives in more than 5 dimensions

Noncritical generation of nonclassical frequency combs via spontaneous rotational symmetry breaking

Science.gov (United States)

Navarrete-Benlloch, Carlos; Patera, Giuseppe; de Valcárcel, Germán J.

2017-10-01

Synchronously pumped optical parametric oscillators (SPOPOs) are optical cavities driven by mode-locked lasers, and containing a nonlinear crystal capable of down-converting a frequency comb to lower frequencies. SPOPOs have received a lot of attention lately because their intrinsic multimode nature makes them compact sources of quantum correlated light with promising applications in modern quantum information technologies. In this work we show that SPOPOs are also capable of accessing the challenging and interesting regime where spontaneous symmetry breaking confers strong nonclassical properties to the emitted light, which has eluded experimental observation so far. Apart from opening the possibility of studying experimentally this elusive regime of dissipative phase transitions, our predictions will have a practical impact, since we show that spontaneous symmetry breaking provides a specific spatiotemporal mode with large quadrature squeezing for any value of the system parameters, turning SPOPOs into robust sources of highly nonclassical light above threshold.

Higgsless grand unified theory breaking and trinification

International Nuclear Information System (INIS)

Carone, Christopher D.; Conroy, Justin M.

2004-01-01

Boundary conditions on an extra dimensional interval can be chosen to break bulk gauge symmetries and to reduce the rank of the gauge group. We consider this mechanism in models with gauge trinification. We determine the boundary conditions necessary to break the trinified gauge group directly down to that of the standard model. Working in an effective theory for the gauge-symmetry-breaking parameters on a boundary, we examine the limit in which the grand-unified theory-breaking-sector is Higgsless and show how one may obtain the low-energy particle content of the minimal supersymmetric standard model. We find that gauge unification is preserved in this scenario, and that the differential gauge coupling running is logarithmic above the scale of compactification. We compare the phenomenology of our model to that of four dimensional 'trinified' theories

Nearshore bars and the break-point hypothesis

Science.gov (United States)

Sallenger, A.H.; Howd, P.A.

1989-01-01

The set of hypotheses calling for bar formation at the break point was tested with field data. During two different experiments, waves were measured across the surf zone coincident with the development of a nearshore bar. We use a criterion, based on the wave height to depth ratio, to determine the offshore limit of the inner surf zone. During the first experiment, the bar became better developed and migrated offshore while remaining well within the inner surf zone. During the second experiment, the surf zone was narrower and we cannot rule out the possibility of break point processes contributing to bar development. We conclude that bars are not necessarily coupled with the break point and can become better developed and migrate offshore while being in the inner surf zone landward from initial wave breaking in the outer surf zone. ?? 1989.

Best estimate small break LOCA analysis for KNGR SIS optimization

International Nuclear Information System (INIS)

Song, JIn Ho; Lim, Hong Sik; Bae, Kyoo Hwan; Lee, Joon

1996-01-01

The KNGR has an advanced ECCS design feature which employs four mechanically-separated SI trains where each train consisting of one HPSI pump and one SIT injects ECC water directly into the reactor vessel downcomer annulus. To demonstrate that the KNGR ECCS design features meet the EPRI ALWR requirements of no core uncovery for a break of up to 6 inch diameter, small break LOCA cases with various break sizes were analyzed using a best-estimate analytical procedure. Two kinds of break locations are considered: cold leg and DVI line breaks. It was observed that the KNGR ECCS design can tolerate a cold leg break of up to 10 inches with no core uncovery. However, since DVI line break with 6 inch diameter undergoes slight core uncovery, further investigation is required for KNGR SIS optimization

Delivering Results for Peace and Development

International Nuclear Information System (INIS)

Pattison, Hazel

2013-01-01

The IAEA’s technical cooperation programme is the primary mechanism for delivering the IAEA’s capacity-building services to its Member States. The programme supports the safe and secure application of nuclear technology for sustainable socioeconomic development in Member States. The overall strategic framework of the TC programme is determined by pertinent provisions laid down in key documents of the IAEA. Strategic direction for the multi-annual TC programme is provided by the Agency’s Members States and, more specifically, by relevant advisory and governance entities. The programme concentrates on: improving human health; supporting agriculture, rural development and food security; advancing water resource management; addressing environmental challenges; helping sustainable energy development, including the use of nuclear power for electricity; and promoting safety and security

Fast neutron measurements at the nELBE time-of-flight facility

Directory of Open Access Journals (Sweden)

Junghansa A. R.

2015-01-01

Full Text Available The compact neutron-time-of-flight facility nELBE at the superconducting electron accelerator ELBE of Helmholtz-Zentrum Dresden-Rossendorf has been rebuilt. A new enlarged experimental hall with a flight path of up to 10 m is available for neutron time-of-flight experiments in the fast energy range from about 50 keV to 10 MeV. nELBE is intended to deliver nuclear data of fast neutron nuclear interactions e.g. for the transmutation of nuclear waste and improvement of neutron physical simulations of innovative nuclear systems. The experimental programme consists of transmission measurements of neutron total cross sections, elastic and inelastic scattering cross section measurements, and neutron induced fission cross sections. The inelastic scattering to the first few excited states in 56Fe was investigated by measuring the gamma production cross section with an HPGe detector. The neutron induced fission of 242Pu was studied using fast ionisation chambers with large homogeneous actinide deposits.

BWR recirculation loop discharge line break LOCA tests with break areas of 50 and 100% assuming HPCS failure at ROSA-III test facility

International Nuclear Information System (INIS)

Suzuki, Mitsuhiro; Tasaka, Kanji; Yonomoto, Taisuke; Anoda, Yoshinari; Kumamaru, Hiroshige; Nakamura, Hideo; Murata, Hideo; Shiba, Masayoshi; Iriko, Masanori.

1985-03-01

This report presents the experimental results of RUN 962 and RUN 963 in ROSA-III program, which are 50 and 100 % break LOCA tests at the BWR recirculation pump discharge line, respectively. The ROSA-III test facility simulates a volumetrically scaled (1/424) BWR system and has four half-length electrically heated fuel bundles, two active recirculation loops, three types of ECCSs and steam and feedwater systems. The experimental data of RUN 962 and RUN 963 were compared with those of RUN 961, a 200 % discharge line break test to study the break area effects on the transient thermal hydraulic phenomena. The least flow areas at the jet pump drive nozzles and recirculation pump discharge nozzle in the broken recirculation loop limitted the discharge flows from the pressure vessel and the depressurization rate in the 100 and 200 % break tests, whereas the least flow area at break nozzle limitted the depressurization rate in the 50 % break test. The highest PCT was observed in the 50 % break test among the three tests. (author)

Dynamical Symmetry Breaking of Extended Gauge Symmetries

OpenAIRE

Appelquist, Thomas; Shrock, Robert

2003-01-01

We construct asymptotically free gauge theories exhibiting dynamical breaking of the left-right, strong-electroweak gauge group $G_{LR} = {\\rm SU}(3)_c \\times {\\rm SU}(2)_L \\times {\\rm SU}(2)_R \\times {\\rm U}(1)_{B-L}$, and its extension to the Pati-Salam gauge group $G_{422}={\\rm SU}(4)_{PS} \\times {\\rm SU}(2)_L \\times {\\rm SU}(2)_R$. The models incorporate technicolor for electroweak breaking, and extended technicolor for the breaking of $G_{LR}$ and $G_{422}$ and the generation of fermion ...

Nonrandom distribuion of chromosome breaks in cultured lymphocytes of normal subjects

Energy Technology Data Exchange (ETDEWEB)

Ayme, S.; Mattei, J.F.; Mattei, M.G.; Aurran, Y.; Giraud, F.

1976-02-29

Breakpoint distribution was studied from cultured lymphocytes on 7653 metaphases from 524 subjects whose karyotypes were normal. The mean break rate was 5% in both sexes. The frequency increased significantly after 40 years and varied during the year. The location of the breaks was very different from the expected random distribution. The break frequency for each chromosome was different according to the type of break (chromatid, simple chromosomal and chromosomal involving rearrangements). The location of the breaks was also studied according to the type of band and with respect to the centromere. A comparison between spontaneous breaks, x-ray induced breaks, breaks in Fanconi's anemia and in congenital rearrangements, show very significant differences.

Heavy ion-induced lesions in DNA: A theoretical model for the initial induction of DNA strand breaks and chromatin breaks

International Nuclear Information System (INIS)

Schmidt, J.B.

1993-01-01

A theoretical model has been developed and used to calculate yields and spatial distributions of DNA strand breaks resulting from the interactions of heavy ions with chromatin in aqueous systems. The three dimensional spatial distribution of ionizing events has been modeled for charged particles as a function of charge and velocity. Chromatin has been modeled as a 30 nm diameter solenoid of nucleosomal DNA. The Monte Carlo methods used by Chatterjee et al. have been applied to DNA in a chromatin conformation. Refinements to their methods include: a combined treatment of primary and low energy (<2 keV) secondary electron interactions, an improved low energy delta ray model, and the combined simulation of direct energy deposition on the DNA and attack by diffusing hydroxyl radicals. Individual particle tracks are treated independently, which is assumed to be applicable to low fluence irradiations in which multiple particle effects are negligible. Single strand break cross section open-quotes hooksclose quotes seen in experiments at very high LET appear to be due to the collapsing radial extent of the track, as predicted in the open-quotes deep sieveclose quotes hypothesis proposed by Tobias et al. Spatial distributions of lesions produced by particles have been found to depend on chromatin structure. In the future, heavy ions may be used as a tool to probe the organization of DNA in chromatin. A Neyman A-binomial variation of the open-quotes cluster modelclose quotes for the distribution of chromatin breaks per irradiated cell has been theoretically tested. The model includes a treatment of the chromatin fragment detection technique's resolution, which places a limitation on the minimum size of fragments which can be detected. The model appears to fit some of the experimental data reasonably well. However, further experimental and theoretical refinements are desirable

Recent Advancements in the Numerical Simulation of Surface Irradiance for Solar Energy Applications: Preprint

Energy Technology Data Exchange (ETDEWEB)

Xie, Yu; Sengupta, Manajit; Deline, Chris

2017-06-27

This paper briefly reviews the National Renewable Energy Laboratory's recent efforts on developing all-sky solar irradiance models for solar energy applications. The Fast All-sky Radiation Model for Solar applications (FARMS) utilizes the simulation of clear-sky transmittance and reflectance and a parameterization of cloud transmittance and reflectance to rapidly compute broadband irradiances on horizontal surfaces. FARMS delivers accuracy that is comparable to the two-stream approximation, but it is approximately 1,000 times faster. A FARMS-Narrowband Irradiance over Tilted surfaces (FARMS-NIT) has been developed to compute spectral irradiances on photovoltaic (PV) panels in 2002 wavelength bands. Further, FARMS-NIT has been extended for bifacial PV panels.

FastStats: Illegal Drug Use

Science.gov (United States)

... Contraceptive Use Infertility Reproductive Health Notice Regarding FastStats Mobile Application Get Email Updates To receive email updates ... for Alcohol and Drug Information National Center on Addiction and Substance Abuse (CASA) Get Email Updates To ...

Symmetry Breaking in MILP Formulations for Unit Commitment Problems

KAUST Repository

Lima, Ricardo

2015-12-11

This paper addresses the study of symmetry in Unit Commitment (UC) problems solved by Mixed Integer Linear Programming (MILP) formulations, and using Linear Programming based Branch & Bound MILP solvers. We propose three sets of symmetry breaking constraints for UC MILP formulations exhibiting symmetry, and its impact on three UC MILP models are studied. The case studies involve the solution of 24 instances by three widely used models in the literature, with and without symmetry breaking constraints. The results show that problems that could not be solved to optimality within hours can be solved with a relatively small computational burden if the symmetry breaking constraints are assumed. The proposed symmetry breaking constraints are also compared with the symmetry breaking methods included in two MILP solvers, and the symmetry breaking constraints derived in this work have a distinct advantage over the methods in the MILP solvers.

Symmetry Breaking in MILP Formulations for Unit Commitment Problems

KAUST Repository

Lima, Ricardo; Novais, Augusto Q.

2015-01-01

This paper addresses the study of symmetry in Unit Commitment (UC) problems solved by Mixed Integer Linear Programming (MILP) formulations, and using Linear Programming based Branch & Bound MILP solvers. We propose three sets of symmetry breaking constraints for UC MILP formulations exhibiting symmetry, and its impact on three UC MILP models are studied. The case studies involve the solution of 24 instances by three widely used models in the literature, with and without symmetry breaking constraints. The results show that problems that could not be solved to optimality within hours can be solved with a relatively small computational burden if the symmetry breaking constraints are assumed. The proposed symmetry breaking constraints are also compared with the symmetry breaking methods included in two MILP solvers, and the symmetry breaking constraints derived in this work have a distinct advantage over the methods in the MILP solvers.

Multiscale Simulation of Breaking Wave Impacts

DEFF Research Database (Denmark)

Lindberg, Ole

compare reasonably well. The incompressible and inviscid ALE-WLS model is coupled with the potential flow model of Engsig-Karup et al. [2009], to perform multiscale calculation of breaking wave impacts on a vertical breakwater. The potential flow model provides accurate calculation of the wave...... with a potential flow model to provide multiscale calculation of forces from breaking wave impacts on structures....

The heat-transfer method: a versatile low-cost, label-free, fast, and user-friendly readout platform for biosensor applications.

Science.gov (United States)

van Grinsven, Bart; Eersels, Kasper; Peeters, Marloes; Losada-Pérez, Patricia; Vandenryt, Thijs; Cleij, Thomas J; Wagner, Patrick

2014-08-27

In recent years, biosensors have become increasingly important in various scientific domains including medicine, biology, and pharmacology, resulting in an increased demand for fast and effective readout techniques. In this Spotlight on Applications, we report on the recently developed heat-transfer method (HTM) and illustrate the use of the technique by zooming in on four established bio(mimetic) sensor applications: (i) mutation analysis in DNA sequences, (ii) cancer cell identification through surface-imprinted polymers, (iii) detection of neurotransmitters with molecularly imprinted polymers, and (iv) phase-transition analysis in lipid vesicle layers. The methodology is based on changes in heat-transfer resistance at a functionalized solid-liquid interface. To this extent, the device applies a temperature gradient over this interface and monitors the temperature underneath and above the functionalized chip in time. The heat-transfer resistance can be obtained by dividing this temperature gradient by the power needed to achieve a programmed temperature. The low-cost, fast, label-free and user-friendly nature of the technology in combination with a high degree of specificity, selectivity, and sensitivity makes HTM a promising sensor technology.

Fast Most Similar Neighbor (MSN) classifiers for Mixed Data

OpenAIRE

Hernández Rodríguez, Selene

2010-01-01

The k nearest neighbor (k-NN) classifier has been extensively used in Pattern Recognition because of its simplicity and its good performance. However, in large datasets applications, the exhaustive k-NN classifier becomes impractical. Therefore, many fast k-NN classifiers have been developed; most of them rely on metric properties (usually the triangle inequality) to reduce the number of prototype comparisons. Hence, the existing fast k-NN classifiers are applicable only when the comparison f...

A synopsis of experimental activities on small-break LOCA

International Nuclear Information System (INIS)

Hein, D.

1984-01-01

Through reactor safety studies like WASH 1400 or the ''Deutsche Risiko-Studie'' the attention has turned from large break loss of coolant accidents to small breaks because of the high contribution of this type of accidents to core meltdown. But only after the TMI-2 accident were also the main activities in the experimental fields shifted world-wide to the small break LOCAs. Since TMI numerous research programs have either been finished or are underway. This review paper presents: a classification of the various types of transients according to break size; a discussion of major physical phenomena associated with a small break LOCA, and a description of a few selected research programs and the most important results achieved. (author)

BOOK REVIEW: Symmetry Breaking

Science.gov (United States)

Ryder, L. H.

2005-11-01

One of the most fruitful and enduring advances in theoretical physics during the last half century has been the development of the role played by symmetries. One needs only to consider SU(3) and the classification of elementary particles, the Yang Mills enlargement of Maxwell's electrodynamics to the symmetry group SU(2), and indeed the tremendous activity surrounding the discovery of parity violation in the weak interactions in the late 1950s. This last example is one of a broken symmetry, though the symmetry in question is a discrete one. It was clear to Gell-Mann, who first clarified the role of SU(3) in particle physics, that this symmetry was not exact. If it had been, it would have been much easier to discover; for example, the proton, neutron, Σ, Λ and Ξ particles would all have had the same mass. For many years the SU(3) symmetry breaking was assigned a mathematical form, but the importance of this formulation fell away when the quark model began to be taken seriously; the reason the SU(3) symmetry was not exact was simply that the (three, in those days) quarks had different masses. At the same time, and in a different context, symmetry breaking of a different type was being investigated. This went by the name of `spontaneous symmetry breaking' and its characteristic was that the ground state of a given system was not invariant under the symmetry transformation, though the interactions (the Hamiltonian, in effect) was. A classic example is ferromagnetism. In a ferromagnet the atomic spins are aligned in one direction only—this is the ground state of the system. It is clearly not invariant under a rotation, for that would change the ground state into a (similar but) different one, with the spins aligned in a different direction; this is the phenomenon of a degenerate vacuum. The contribution of the spin interaction, s1.s2, to the Hamiltonian, however, is actually invariant under rotations. As Coleman remarked, a little man living in a ferromagnet would

Application of a Virtual Reactivity Feedback Control Loop in Non-Nuclear Testing of a Fast Spectrum Reactor

International Nuclear Information System (INIS)

Bragg-Sitton, Shannon M.; Forsbacka, Matthew

2004-01-01

For a compact, fast-spectrum reactor, reactivity feedback is dominated by core deformation at elevated temperature. Given the use of accurate deformation measurement techniques, it is possible to simulate nuclear feedback in non-nuclear electrically heated reactor tests. Implementation of simulated reactivity feedback in response to measured deflection is being tested at the Nasa Marshall Space Flight Center Early Flight Fission Test Facility (EFF-TF). During tests of the SAFE-100 reactor prototype, core deflection was monitored using a high resolution camera. 'Virtual' reactivity feedback was accomplished by applying the results of Monte Carlo calculations (MCNPX) to core deflection measurements; the computational analysis was used to establish the reactivity worth of various core deformations. The power delivered to the SAFE-100 prototype was then adjusted accordingly via kinetics calculations. The work presented in this paper will demonstrate virtual reactivity feedback as core power was increased from 1 kWt to 10 kWt, held approximately constant at 10 kWt, and then allowed to decrease based on the negative thermal reactivity coefficient. (authors)

Fault protection system in a 'regulated high voltage power supply (80 KV, 130A)' for neutral beam injector

International Nuclear Information System (INIS)

Patel, Paresh; Sumod, C.B.; Thakkar, Dipal

2011-01-01

Regulated High Voltage Power Supply (RHVPS) system has been developed at Institute for Plasma Research (IPR) for use with the Neutral Beam and RF applications. The highest ratings manufactured so far is 80 kV, 130 A. The system is developed in house and also being delivered at different research institutes for various applications. Since it is a multi megawatt output power system, and the loads have very low fault energy tolerant, fault protection system is mandatory. Protections are mandatory at each stage of conversion. Output fault protection is done in a variety of ways. Fast turn off at output is achieved and test results are discussed. Multi secondary transformers (5.6 MVA rating, with 40 outputs) are used in realising the power supply. These special transformers need protection even for over current at one secondary when the output fault current is not reflected to primaries to break the main circuit breaker. It becomes difficult to bifurcate fault in such situations. Special technique is applied to sense it. Electronic means are used for fast detection and tripping the system. This paper describes the basic RHVPS topology and test results along with presentation on the input and output fault protection systems. (author)

FAST: FAST Analysis of Sequences Toolbox

Directory of Open Access Journals (Sweden)

Travis J. Lawrence

2015-05-01

Full Text Available FAST (FAST Analysis of Sequences Toolbox provides simple, powerful open source command-line tools to filter, transform, annotate and analyze biological sequence data. Modeled after the GNU (GNU’s Not Unix Textutils such as grep, cut, and tr, FAST tools such as fasgrep, fascut, and fastr make it easy to rapidly prototype expressive bioinformatic workflows in a compact and generic command vocabulary. Compact combinatorial encoding of data workflows with FAST commands can simplify the documentation and reproducibility of bioinformatic protocols, supporting better transparency in biological data science. Interface self-consistency and conformity with conventions of GNU, Matlab, Perl, BioPerl, R and GenBank help make FAST easy and rewarding to learn. FAST automates numerical, taxonomic, and text-based sorting, selection and transformation of sequence records and alignment sites based on content, index ranges, descriptive tags, annotated features, and in-line calculated analytics, including composition and codon usage. Automated content- and feature-based extraction of sites and support for molecular population genetic statistics makes FAST useful for molecular evolutionary analysis. FAST is portable, easy to install and secure thanks to the relative maturity of its Perl and BioPerl foundations, with stable releases posted to CPAN. Development as well as a publicly accessible Cookbook and Wiki are available on the FAST GitHub repository at https://github.com/tlawrence3/FAST. The default data exchange format in FAST is Multi-FastA (specifically, a restriction of BioPerl FastA format. Sanger and Illumina 1.8+ FastQ formatted files are also supported. FAST makes it easier for non-programmer biologists to interactively investigate and control biological data at the speed of thought.

Data-driven execution of fast multipole methods

KAUST Repository

Ltaief, Hatem

2013-09-17

Fast multipole methods (FMMs) have O (N) complexity, are compute bound, and require very little synchronization, which makes them a favorable algorithm on next-generation supercomputers. Their most common application is to accelerate N-body problems, but they can also be used to solve boundary integral equations. When the particle distribution is irregular and the tree structure is adaptive, load balancing becomes a non-trivial question. A common strategy for load balancing FMMs is to use the work load from the previous step as weights to statically repartition the next step. The authors discuss in the paper another approach based on data-driven execution to efficiently tackle this challenging load balancing problem. The core idea consists of breaking the most time-consuming stages of the FMMs into smaller tasks. The algorithm can then be represented as a directed acyclic graph where nodes represent tasks and edges represent dependencies among them. The execution of the algorithm is performed by asynchronously scheduling the tasks using the queueing and runtime for kernels runtime environment, in a way such that data dependencies are not violated for numerical correctness purposes. This asynchronous scheduling results in an out-of-order execution. The performance results of the data-driven FMM execution outperform the previous strategy and show linear speedup on a quad-socket quad-core Intel Xeon system.Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.

The scale of supersymmetry breaking as a free parameter

International Nuclear Information System (INIS)

Polonsky, N.

2001-01-01

While supersymmetric extensions of the Standard Model can be fully described in terms of explicitly broken global supersymmetry, this description is only effective. Once related to spontaneous breaking in a more fundamental theory, the effective parameters translate to functions of two distinct scales, the scale of spontaneous supersymmetry breaking and the scale of its mediation to the standard-model fields. The scale dependence will be written explicitly and the full spectrum of supersymmetry breaking operators which emerges will be explored. It will be shown that, contrary to common lore, scale-dependent operators can play an important role in determining the phenomenology. For example, theories with low-energy supersymmetry breaking, such as gauge mediation, may correspond to a scalar potential which is quite different than in theories with high-energy supersymmetry breaking, such as gravity mediation. As a concrete example, the Higgs mass prediction will be discussed in some detail and its upper bound will be shown to be sensitive to the supersymmetry breaking scale

The spontaneous ℤ_2 breaking Twin Higgs

International Nuclear Information System (INIS)

Beauchesne, Hugues; Earl, Kevin; Grégoire, Thomas

2016-01-01

The Twin Higgs model seeks to address the little hierarchy problem by making the Higgs a pseudo-Goldstone of a global SU(4) symmetry that is spontaneously broken to SU(3). Gauge and Yukawa couplings, which explicitly break SU(4), enjoy a discrete ℤ_2 symmetry that accidentally maintains SU(4) at the quadratic level and therefore keeps the Higgs light. Contrary to most beyond the Standard Model theories, the quadratically divergent corrections to the Higgs mass are cancelled by a mirror sector, which is uncharged under the Standard Model groups. However, the Twin Higgs with an exact ℤ_2 symmetry leads to equal vevs in the Standard Model and mirror sectors, which is phenomenologically unviable. An explicit ℤ_2 breaking potential must then be introduced and tuned against the SU(4) breaking terms to produce a hierarchy of vevs between the two sectors. This leads to a moderate but non-negligible tuning. We propose a model to alleviate this tuning, without the need for an explicit ℤ_2 breaking sector. The model consists of two SU(4) fundamental Higgses, one whose vacuum preserves ℤ_2 and one whose vacuum breaks it. As the interactions between the two Higgses are turned on, the ℤ_2 breaking is transmitted from the broken to the unbroken sector and a small hierarchy of vevs is naturally produced. The presence of an effective tadpole and feedback between the two Higgses lead to a sizable improvement of the tuning. The resulting Higgs boson is naturally very Standard Model like.

Breaking the silence

DEFF Research Database (Denmark)

Konradsen, Hanne; Kirkevold, Marit; McCallin, Antoinette

2012-01-01

and individual interviews were analyzed using the grounded theory method. The findings revealed that the main concern of the patients was feeling isolated, which was resolved using a process of interactional integration. Interactional integration begins by breaking the silence to enable the progression from...

Some Applications of Fast Neutron Activation Analysis of Oxygen

Energy Technology Data Exchange (ETDEWEB)

Owrang, Farshid

2003-07-01

In this thesis we focus on applications of neutron activation of oxygen for several purposes: A) measuring the water level in a laboratory tank, B) measuring the water flow in a pipe system set-up, C) analysing the oxygen in combustion products formed in a modern gasoline SI engine, and D) measuring on-line the amount of oxygen in bulk liquids. A) Water level measurements. The purpose of this work was to perform radiation based water level measurements, aimed at nuclear reactor vessels, on a laboratory scale. A laboratory water tank was irradiated by fast neutrons from a neutron generator. The water was activated at different water levels and the water level was decreased. The produced gamma radiation was measured using two detectors at different heights. The results showed that the method is suitable for measurement of water level and that a relatively small experimental set-up can be used for developing methods for water level measurements in real boiling water reactors based on activated oxygen in the water. B) Water flows in pipe. The goal in this work was to investigate the asymmetric distribution of activity in flow measurements with pulsed neutron activation (PNA) in a laboratory piping system. Earlier investigations had shown a discrepancy between the measured velocity of the activated water by PNA and the true mean velocity in the pipe. This discrepancy decreased with larger distances from the activation point. It was speculated that the induced activity in the pipe did not distribute homogeneously. With inhomogeneous radial distribution of activity in combination with a velocity profile in the pipe, the activated water may not have the same velocity as the mean velocity of water in the pipe. To study this phenomenon, a water-soluble colour was injected into a transparent pipe for simulation of the transport of the activated water. The radial concentration of the colour, at different distances from the activation point, was determined. The result

Some Applications of Fast Neutron Activation Analysis of Oxygen

International Nuclear Information System (INIS)

Owrang, Farshid

2003-01-01

In this thesis we focus on applications of neutron activation of oxygen for several purposes: A) measuring the water level in a laboratory tank, B) measuring the water flow in a pipe system set-up, C) analysing the oxygen in combustion products formed in a modern gasoline SI engine, and D) measuring on-line the amount of oxygen in bulk liquids. A) Water level measurements. The purpose of this work was to perform radiation based water level measurements, aimed at nuclear reactor vessels, on a laboratory scale. A laboratory water tank was irradiated by fast neutrons from a neutron generator. The water was activated at different water levels and the water level was decreased. The produced gamma radiation was measured using two detectors at different heights. The results showed that the method is suitable for measurement of water level and that a relatively small experimental set-up can be used for developing methods for water level measurements in real boiling water reactors based on activated oxygen in the water. B) Water flows in pipe. The goal in this work was to investigate the asymmetric distribution of activity in flow measurements with pulsed neutron activation (PNA) in a laboratory piping system. Earlier investigations had shown a discrepancy between the measured velocity of the activated water by PNA and the true mean velocity in the pipe. This discrepancy decreased with larger distances from the activation point. It was speculated that the induced activity in the pipe did not distribute homogeneously. With inhomogeneous radial distribution of activity in combination with a velocity profile in the pipe, the activated water may not have the same velocity as the mean velocity of water in the pipe. To study this phenomenon, a water-soluble colour was injected into a transparent pipe for simulation of the transport of the activated water. The radial concentration of the colour, at different distances from the activation point, was determined. The result

Breaking antidunes: Cyclic behavior due to hysteresis

DEFF Research Database (Denmark)

Deigaard, Rolf

2006-01-01

The cyclic behavior of breaking antidunes (growth, breaking of surface wave, obliteration) is investigated by use of a numerical model. The model includes the transition between supercritical and transcritical flow. As the antidune grows the flow becomes transcritical and a hydraulic jump is form...

Group theory of spontaneous symmetry breaking

International Nuclear Information System (INIS)

Ghaboussi, F.

1987-01-01

The connection between the minimality of the Higgs field potential and the maximal little groups of its representation obtained by spontaneous symmetry breaking is analyzed. It is shown that for several representations the lowest minimum of the potential is related to the maximal little group of those representations. Furthermore, a practical necessity criterion is given for the representation of the Higgs field needed for spontaneous symmetry breaking

Moduli/inflaton mixing with supersymmetry breaking field

Energy Technology Data Exchange (ETDEWEB)

Endo, M.; Takahashi, F. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Tokyo Univ. (Japan). Inst. for Cosmic Ray Research; Hamaguchi, K. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)]|[Tokyo Univ. (Japan). Dept. of Physics

2006-05-15

A heavy scalar field such as moduli or an inflaton generally mixes with a field responsible for the supersymmetry breaking. We study the scalar decay into the standard model particles and their superpartners, gravitinos, and the supersymmetry breaking sector, particularly paying attention to decay modes that proceed via the mixing between the scalar and the supersymmetry breaking field. The impacts of the new decay processes on cosmological scenarios are also discussed; the modulus field generically produces too much gravitinos, and most of the inflation models tend to result in too high reheating temperature and/or gravitino overproduction. (Orig.)

Spontaneous symmetry breaking and its cosmological consequences

International Nuclear Information System (INIS)

Kobzarev, I.Yu.

1975-01-01

The concept of symmetry and of the spontaneous symmetry breaking are presented in popular form as applied to quantum physics. Though the presence of the spontaneous symmetry breaking is not proved directly for interactions of elementary particles, on considering the hypothesis of its presence as applied to the hot Universe theory a possibility of obtaining rather uncommon cosmological consequences is discussed. In particular, spontaneous symmetry breaking of vacuum and the rather hot Universe lead necessarily to the presence of the domain structure of the Universe with the surfase energy at the domain interface in the form of a real physical object

Modelling oil price volatility with structural breaks

International Nuclear Information System (INIS)

Salisu, Afees A.; Fasanya, Ismail O.

2013-01-01

In this paper, we provide two main innovations: (i) we analyze oil prices of two prominent markets namely West Texas Intermediate (WTI) and Brent using the two recently developed tests by Narayan and Popp (2010) and Liu and Narayan, 2010 both of which allow for two structural breaks in the data series; and (ii) the latter method is modified to include both symmetric and asymmetric volatility models. We identify two structural breaks that occur in 1990 and 2008 which coincidentally correspond to the Iraqi/Kuwait conflict and the global financial crisis, respectively. We find evidence of persistence and leverage effects in the oil price volatility. While further extensions can be pursued, the consideration of asymmetric effects as well as structural breaks should not be jettisoned when modelling oil price volatility. - Highlights: ► We analyze oil price volatility using NP (2010) and LN (2010) tests. ► We modify the LN (2010) to account for leverage effects in oil price. ► We find two structural breaks that reflect major global crisis in the oil market. ► We find evidence of persistence and leverage effects in oil price volatility. ► Leverage effects and structural breaks are fundamental in oil price modelling.

DNA strand breaks, repair, and survival in x-irradiated mammalian cells

International Nuclear Information System (INIS)

Dugle, D.L.; Gillespie, C.J.; Chapman, J.D.

1976-01-01

The yields of unrepairable single- and double-strand breaks in the DNA of x-irradiated Chinese hamster cells were measured by low-speed neutral and alkaline sucrose density gradient sedimentation in order to investigate the relation between these lesions and reproductive death. After maximal single-strand rejoining, at all doses, the number of residual single-strand breaks was twice the number of residual double-strand breaks. Both double-strand and unrepairable single-strand breaks were proportional to the square of absorbed dose, in the range 10-50 krad. No rejoining of double-strand breaks was observed. These observations suggest that, in mammalian cells, most double-strand breaks are not repairable, while all single-strand breaks are repaired except those that are sufficiently close on complementary strands to constitute double-strand breaks. Comparison with cell survival measurements at much lower doses suggests that loss of reproductive capacity corresponds to induction of approximately one double-strand break

Symmetry breaking, mixing, instability, and low-frequency variability in a minimal Lorenz-like system.

Science.gov (United States)

Lucarini, Valerio; Fraedrich, Klaus

2009-08-01

Starting from the classical Saltzman two-dimensional convection equations, we derive via a severe spectral truncation a minimal 10 ODE system which includes the thermal effect of viscous dissipation. Neglecting this process leads to a dynamical system which includes a decoupled generalized Lorenz system. The consideration of this process breaks an important symmetry and couples the dynamics of fast and slow variables, with the ensuing modifications to the structural properties of the attractor and of the spectral features. When the relevant nondimensional number (Eckert number Ec) is different from zero, an additional time scale of O(Ec(-1)) is introduced in the system, as shown with standard multiscale analysis and made clear by several numerical evidences. Moreover, the system is ergodic and hyperbolic, the slow variables feature long-term memory with 1/f(3/2) power spectra, and the fast variables feature amplitude modulation. Increasing the strength of the thermal-viscous feedback has a stabilizing effect, as both the metric entropy and the Kaplan-Yorke attractor dimension decrease monotonically with Ec. The analyzed system features very rich dynamics: it overcomes some of the limitations of the Lorenz system and might have prototypical value in relevant processes in complex systems dynamics, such as the interaction between slow and fast variables, the presence of long-term memory, and the associated extreme value statistics. This analysis shows how neglecting the coupling of slow and fast variables only on the basis of scale analysis can be catastrophic. In fact, this leads to spurious invariances that affect essential dynamical properties (ergodicity, hyperbolicity) and that cause the model losing ability in describing intrinsically multiscale processes.

Breaking Gaussian incompatibility on continuous variable quantum systems

Energy Technology Data Exchange (ETDEWEB)

Heinosaari, Teiko, E-mail: teiko.heinosaari@utu.fi [Turku Centre for Quantum Physics, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland); Kiukas, Jukka, E-mail: jukka.kiukas@aber.ac.uk [Department of Mathematics, Aberystwyth University, Penglais, Aberystwyth, SY23 3BZ (United Kingdom); Schultz, Jussi, E-mail: jussi.schultz@gmail.com [Turku Centre for Quantum Physics, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland); Dipartimento di Matematica, Politecnico di Milano, Piazza Leonardo da Vinci 32, I-20133 Milano (Italy)

2015-08-15

We characterise Gaussian quantum channels that are Gaussian incompatibility breaking, that is, transform every set of Gaussian measurements into a set obtainable from a joint Gaussian observable via Gaussian postprocessing. Such channels represent local noise which renders measurements useless for Gaussian EPR-steering, providing the appropriate generalisation of entanglement breaking channels for this scenario. Understanding the structure of Gaussian incompatibility breaking channels contributes to the resource theory of noisy continuous variable quantum information protocols.

Fast thermal transients on valve

International Nuclear Information System (INIS)

Ferjancic, M.; Stok, B.; Halilovic, M.; Koc, P.; Mole, N.; Otrin, Z.; Kotar, A.

2007-01-01

One of the regulatory body methods to supervise nuclear safety of a nuclear power plant is a review of plant modifications and evaluation of their impact on plant operating experience. The Slovenian Nuclear Safety Administration (SNSA) licensed in April 2003 the use of leak-before-break (LBB) methodology in the Krsko NPP for the primary loop including surge line and connecting pipelines with minimal diameter of 6 inch. The SNSA decision based also on fracture mechanics analyses that include direct pipe failure mechanisms such as water hammer, creep damage, erosion and corrosion, fatigue and environmental conditions over the entire life of the plant. The evaluation of the operating transients pointed out, that presumed loadings, used for the LBB analysis, did not incorporate all the fast thermal transients data. For that purpose the SNSA requested Faculty of Mechanical Engineering (FS) in Ljubljana to perform additional analyses. The results of the analysis shall confirm the validity of the LBB analysis. (author)

Antiproton fast ignition for inertial confinement fusion

International Nuclear Information System (INIS)

Perkins, L.J.

1999-01-01

With 180 MJ/microg, antiprotons offer the highest stored energy per unit mass of any known entity. The use of antiprotons to promote fast ignition in an inertial confinement fusion (ICF) capsule and produce high target gains with only modest compression of the main fuel is investigated. Unlike standard fast ignition where the ignition energy is supplied by energetic, short pulse laser, the energy here is supplied through the ionization energy deposited when antiprotons annihilate at the center of a compressed fuel capsule. This can be considered in-situ fast ignition as it obviates the need for the external injection of the ignition energy. In the first of two candidate schemes, the antiproton package is delivered by a low-energy ion beam. In the second, autocatalytic scheme, the antiprotons are preemplaced at the center of the capsule prior to compression. In both schemes, the author estimates that ∼10 12 antiprotons are required to initiate fast ignition in a typical ICF capsule and show that incorporation of a thin, heavy metal shell is desirable to enhance energy deposition within the ignitor zone. In addition to eliminating the need for a second, energetic fast laser and vulnerable final optics, this scheme would achieve central ignition without reliance on laser channeling through halo plasma or Hohlraum debris. However, in addition to the practical difficulties of storage and manipulation of antiprotons at low energy, the other large uncertainty for the practicality of such a speculative scheme is the ultimate efficiency of antiproton production in an external, optimized facility. Estimates suggest that the electrical wall plug energy per pulse required for the separate production of the antiprotons is of the same order as that required for the conventional slow compression driver

Optimization of the FAST ICRF antenna using TOPICA code

International Nuclear Information System (INIS)

Sorba, M.; Milanesio, D.; Maggiora, R.; Tuccillo, A.

2010-01-01

Ion Cyclotron Resonance Heating is one of the most important auxiliary heating systems in most plasma confinement experiments. Because of this, the need for very accurate design of ion cyclotron (IC) launchers has dramatically grown in recent years. Furthermore, a reliable simulation tool is a crucial request in the successful design of these antennas, since full testing is impossible outside experiments. One of the most advanced and validated simulation codes is TOPICA, which offers the possibility to handle the geometrical level of detail of a real antenna in front of an accurately described plasma scenario. Adopting this essential tool made possible to reach a refined design of ion cyclotron radio frequency antenna for the FAST (Fusion Advanced Studies Torus) experiment . Starting from a streamlined antenna model and then following well-defined refinement procedures, an optimized launcher design in terms of power delivered to plasma has been finally achieved. The computer-assisted geometry refinements allowed an increase in the performances of the antenna and notably in power handling: the extent of the gained improvements were not experienced in the past, essentially due to the absence of predictive tools capable of analyzing the detailed effects of antenna geometry in plasma facing conditions. Thus, with the help of TOPICA code, it has been possible to comply with the FAST experiment requirements in terms of vacuum chamber constraints and power delivered to plasma. Once an antenna geometry was optimized with a reference plasma profile, the analysis of the performances of the launcher has been extended with respect to two plasma scenarios. Exploiting all TOPICA features, it has been possible to predict the behavior of the launcher in real operating conditions, for instance varying the position of the separatrix surface. In order to fulfil the analysis of the FAST IC antenna, the study of the RF potentials, which depend on the parallel electric field computation

Application of Fast Neutron Activation to Determinate of N, P and K Element Contents in the Sludge

International Nuclear Information System (INIS)

Supriyatni E; Yazid M; Nuraini E; Sunardi

2003-01-01

The application of fast neutron activation to determinate of N, P and K element contents in the sludge has been performed. The aim of this research is to determine the content of N, P and K elements in the sludge for the possibility of reuse as organic fertilizer. Sludge sample was taken from waste water retainer at Bantul Waste Water Treatment Plant. The sample was dried and ground, then irradiated using 14.7 MeV fast neutron from neutron generator. Result was qualitatively and quantitatively analyses using gamma spectrometer. The result showed that the sludge contains N with energy 511 keV, P with energy 1778 keV and K with energy 1273 keV. The concentration of N is (4.101 ± 0.007) mg/g, P is = (640.510 ± 14.34) mg/g and K = (3.045 ± 0.064) mg/g. (author)

Heterogeneous autoregressive model with structural break using nearest neighbor truncation volatility estimators for DAX.

Science.gov (United States)

Chin, Wen Cheong; Lee, Min Cherng; Yap, Grace Lee Ching

2016-01-01

High frequency financial data modelling has become one of the important research areas in the field of financial econometrics. However, the possible structural break in volatile financial time series often trigger inconsistency issue in volatility estimation. In this study, we propose a structural break heavy-tailed heterogeneous autoregressive (HAR) volatility econometric model with the enhancement of jump-robust estimators. The breakpoints in the volatility are captured by dummy variables after the detection by Bai-Perron sequential multi breakpoints procedure. In order to further deal with possible abrupt jump in the volatility, the jump-robust volatility estimators are composed by using the nearest neighbor truncation approach, namely the minimum and median realized volatility. Under the structural break improvements in both the models and volatility estimators, the empirical findings show that the modified HAR model provides the best performing in-sample and out-of-sample forecast evaluations as compared with the standard HAR models. Accurate volatility forecasts have direct influential to the application of risk management and investment portfolio analysis.

Strongly coupled semidirect mediation of supersymmetry breaking

International Nuclear Information System (INIS)

Ibe, M.; Izawa, K.-I.; Nakai, Y.

2009-01-01

Strongly coupled semidirect gauge mediation models of supersymmetry breaking through massive mediators with standard-model charges are investigated by means of composite degrees of freedom. Sizable mediation is realized to generate the standard-model gaugino masses for a small mediator mass without breaking the standard-model symmetries.