WorldWideScience

Sample records for application au stockage

  1. Advanced and Integrated Petrophysical Characterization for CO2 Storage: Application to the Ketzin Site Caractérisation pétrophysique intégrée pour le stockage de CO2 : application au site de Ketzin

    Directory of Open Access Journals (Sweden)

    Fleury M.

    2013-06-01

    from 100 to 300 mD. Two zones were identified on the logs characterized by two different irreducible saturation ranging from 15 up to 35%. The measured relative permeability curves show a sharp decrease of the water effective permeability and suggest that a saturation lower than 50% cannot be reached in practice. The exponent of the resistivity index curve is about 1.7, lower than the default value of 2. The caprock has a permeability of 27 nD, a porosity around 15% and a pore diffusivity of 0.8 x 10-9 m2/s La simulation et le suivi d’un stockage de CO2 requiert des données pétrophysiques spécifiques. Nous présentons un ensemble d’expériences applicables à tout stockage et à toute couverture, fournissant des données pour des simulations numériques réalistes du potentiel de stockage et de l’injection. Ces expériences sont intégrées avec les données diagraphiques pour l’estimation de la porosité, la saturation irréductible, la pression capillaire et la perméabilité relative de l’eau en drainage, la saturation en gaz résiduelle, les relations résistivité-saturation et les propriétés de transport de la couverture (perméabilité et diffusivité. Le cas considéré est l’aquifère salin du Trias dans le contexte du projet CO2SINK, le premier site expérimental de stockage en Allemagne situé près de Ketzin. Nous avons utilisé des méthodes de mesure nécessitant des durées raisonnables tout en restant représentatives des processus in situ. Pour le transport diphasique, nous avons utilisé la centrifugation. Pour la résistivité, nous avons utilisé une méthode rapide « Fast Resistivity Index Measurement » (FRIM en drainage et imbibition, en condition ambiante et en condition de stockage. Pour la caractérisation de la couverture, nous avons utilisé une technique rapide RMN (Résonance Magnétique Nucléaire utilisant le deutérium comme traceur pour la mesure de diffusion et une méthode stationnaire innovante pour la mesure de

  2. Transferts et Stockages Magmatiques au Piton de la Fournaise

    OpenAIRE

    Massin, Frédérick

    2009-01-01

    La sismicité associée à l'activité d'un volcan intraplaque tel que le Piton de la Fournaise se développe, a priori, sans aucun contrôle tectonique régional. La com- plexité des structures internes et le fonctionnement des structures de stockage et de transfert magmatique déclenchent une sismicité partiellement récurrente. Cette récurrence de la sismicité s'observe grâce aux formes d'ondes des séismes, quasiment identiques, et témoigne de la réactivation d'une même source. Notre étude exploite...

  3. Stockage de l'énergie dans les applications stationnaires

    OpenAIRE

    Multon, Bernard; Robin, Gaël; Erambert, Erika; BEN AHMED, Hamid

    2004-01-01

    Les besoins de stockage d'énergie électrique dans les applications stationnaires sont nombreux et leur nécessité se révèle de plus en plus forte. Nous proposons d'abord d'examiner ces besoins dans le contexte d'évolution du système de production d'électricité vers une plus forte décentralisation et vers un plus fort taux de pénétration de sources fluctuantes indépendamment de la demande. Nous développons ensuite une analyse critique des caractéristiques générales des moyens de stockage avant ...

  4. Modélisation des écoulements de fluides et des transferts de chaleur au sein des déchets ménagers. Application à la réinjection de lixiviat dans un centre de stockage

    OpenAIRE

    Aran, Christophe

    2001-01-01

    La modélisation des écoulements de fluides et des transferts de chaleur au sein des déchets ménagers vise d'une part à contrôler et maîtriser les effluents liquides (lixiviat) et gazeux (biogaz) issus de la biodégradation et susceptibles de polluer l'environnement, d'autre part à accélérer les temps de stabilisation des décharges estimés actuellement à une trentaine d'année. La première partie de l'étude a consisté à instrumenter un centre de stockage de la région parisienne dans lequel des s...

  5. Micro reactor for heterogeneous catalysis / application: hydrogen storage from methyl-cyclohexane; Microreacteur pour la catalyse heterogene / application au stockage d'hydrogene a partir du methylcyclohexane

    Energy Technology Data Exchange (ETDEWEB)

    Roumanie, M.; Pijolat, C. [Ecole Nationale Superieure des Mines, Centre SPIN, Dept. MICC, LPMG-URA CNRS D2021, 42 - Saint-Etienne (France); Meille, V.; Bellefon, C. de [CNRS - CPE, Lab. de Genie des Procedes Catalytiques, 69 - Villeurbanne (France); Pouteau, P.; Delattre, C. [CEA Grenoble, Lab. d' Electronique et de Technologie de l' Intrumentation, LETI, 38 (France)

    2005-07-01

    The use of micro-technology and the miniaturization of various systems such as micro-fuel cell is a current field of activity. The aim of this work is to study and to realize an autonomous catalytic micro-reactor for hydrogen release from methyl-cyclohexane. For this reaction of dehydrogenation, the common catalyst is platinum supported on alumina. Consequently, the general objectives of this work are: (i)to develop a micro-reactor with its heaters, sensors..., (ii)to deposit catalysts in the micro-reactor, and (iii)to study the catalytic conversion of this system. The chip used has been developed by the CEA-LETI for biomedical application especially DNA chip. It is comprising several channels etched in silicon substrate with a classic deep reactive ion etching process. These channels of 100 {mu}m depth are structured with pillars to increase the surface and thus improve the overall reaction rate compare to a channel without pillar. The structured micro-reactor is molecularly bonded with a silicon cover to form an airtight devices. As the silicon is transparent to the infrared wavelength a CCD camera is used to observe the bonding quality. The chips are then connected with micro-tubes to test them. The first tested solution consists in a polyimide-glass capillary of 100 {mu}m OD and 40 {mu}m ID stuck inside the channel entrance and glued with a ceramic cement or glass. A second solution is currently under development with metallic capillaries. The reaction studied is extremely endothermic with a heat of reaction of 204 kJ/mol. Consequently it is necessary to include in this system some heaters to have an autonomous micro-reactor. Thick film resistances of platinum have been deposited by the screen printing and used as micro-heaters. The tests of micro-heaters are realized using the infrared thermographic camera. As the silicon is transparent to infrared wavelength, a sputtered platinum layer has been deposited on the opposite face of the resistances. This layer

  6. GESTION DES FLUX ÉNERGÉTIQUE DANS UN SYSTÈME PHOTOVOLTAÏQUE AVEC STOCKAGE CONNECTER AU RÉSEAU – Application à l'habitat

    OpenAIRE

    Riffonneau, Yann

    2009-01-01

    The work done during this thesis contributes to the intensive penetration of the photovoltaic electricity production into the electric grid. Photovoltaic energy holds an immense potential, in particular in the housing sector, but intermittent nature limits its large scale development. In this thesis, we propose to add a storage element to the grid connected photovoltaic system (housing application). First, we introduce the notion of energy management in these systems called « hybrids systems ...

  7. Stockage multimode au niveau quantique pendant une milliseconde

    OpenAIRE

    Jobez, Pierre

    2015-01-01

    L'apparition de la physique quantique à la fin du XIXe siècle a inspiré nombre d'applications basées sur des effets quantiques. La communication quantique, basée sur l'utilisation de "qubit" à l'instar des "bit" en communication classique, est l'une de ces applications. La valeur de ces qubits, pouvant être en superposition quantique, est impossible à copier parfaitement. Aujourd'hui, la cryptographie quantique est déjà la manière la plus confidentielle de communiquer. Néanmoins, la distance ...

  8. Le stockage de l'énergie électrique. Moyens et applications

    OpenAIRE

    Multon, Bernard; Peter, Jean-Marie

    1996-01-01

    Cet article donne une synthèse critique de la journée d'étude SEE du 1er février 1996 dont l'objectif était de faire le point sur un problème fondamental du génie électrique : le stockage de l'énergie électrique. L'énergie électrique représente actuellement 12% de la totalité de l'énergie traitée par les hommes sur la terre. Cette proportion va encore croître considérablement au cours des prochaines années (34% prévus en 2025) dans un contexte de diminution des ressources combustibles fossile...

  9. 3D asynchronous particle tracking in single and dual continuum matrix-fractures. Application to nuclear waste storage; Modelisation 3D du transport particulaire asynchrone en simple et double continuum matrice-fractures: application au stockage de dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Lam, M.Ph

    2008-06-15

    This PhD research was conducted as a collaboration between Laboratoire National d'Hydraulique et Environnement (LNHE) from EDF R and D and the Institut de Mecanique des Fluides de Toulouse (IMFT) in the frame of a CIFRE contract. This PhD thesis aims at providing LNHE a reliable numerical model to study the feasibility of a nuclear waste storage in deep geological structures. The main focus of the thesis is put on developing and implementing a Random Walk Particle Method (RWPM) to model contaminant transport in 3D heterogeneous and fractured porous media. In its first part, the report presents the Lagrangian particle tracking method used to model transport in heterogeneous media with a direct high resolution approach. The solute plume is discretized into concentration packets: particles. The model tracks each particle based on a time-explicit displacement algorithm according to an advective component and a diffusive random component. The method is implemented on a hydraulic model discretized on a 3D unstructured tetrahedral finite element mesh. We focus on techniques to overcome problems due to the discontinuous transport parameters and the unstructured mesh. First, we introduce an asynchronous time-stepping approach to deal with the numerical and overshoot errors that occur with conventional RWPM. Then, a filtering method is applied to smooth discontinuous transport parameters (pre-processing). Finally, once the particle displacements are computed, we propose several filtering and sampling methods to obtain concentrations from particle positions (post-processing). Applications of these methods are presented with cases of tracer advection-dispersion in homogeneous and heterogeneous media. For dense fracture networks, direct high resolution methods are very time consuming and need a lot of computational resources. So, as an alternative to the discrete approach, a dual-continuum representation is used, in the second part of the report, to describe the porous

  10. 4D Joint Stratigraphic Inversion of Prestack Seismic Data: Application to the CO2 Storage Reservoir (Utsira Sand Formation at Sleipner Site Inversion stratigraphique jointe 4D de données sismiques avant sommation : application au réservoir de stockage de CO2 (Formation Utsira du site de Sleipner

    Directory of Open Access Journals (Sweden)

    Labat K.

    2012-04-01

    éservoirs au cours de leur production. Nous présentons ici une méthodologie d'inversion stratigraphique 4D qui fournit une estimation des variations d'impédances des ondes P et S dans le réservoir, par inversion de données de sismiques répétées avant-sommation. L'inversion 4D est implémentée dans le domaine temps et nécessite une loi de mise à l'échelle des temps de trajets pour chaque jeu de données de sismique répétée (aussi appelé "millésime" afin de mettre en correspondance les temps d'arrivée d'événements homologues observés sur les jeux de données appelés référence et monitors. Cette opération est souvent appelée "warping". L'inversion 4D est une méthodologie qui comporte trois étapes : la première étape consiste à inverser chaque millésime sismique séparément, pour produire autant de distributions en impédances P et S que de jeux de données considérés. La seconde étape utilise l'information des impédances P disponibles pour résoudre le problème du warping, qui est un point clé pour la troisième et dernière étape : l'inversion jointe de tous les millésimes sismiques disponibles. Cette séquence d'inversion 4D a été appliquée aux jeux de données enregistrés sur le réservoir de stockage de CO2 du site norvégien de Sleipner (Mer du Nord. Ce dernier est devenu un site industriel de référence pour le stockage à long terme du dioxyde de carbone (CO2 dans un aquifère salin, la formation des sables de l'Utsira. Nous avons focalisé notre étude sur l'inversion 4D des millésimes 1994 et 2006, acquise respectivement avant et dix ans après le début de l'injection de CO2. Le warping a fourni une loi de mise à l'échelle des temps de propagation avec un retard maximum d'environ 45 ms à la base de l'aquifère Utsira. L'inversion 4D jointe a donné des résultats plus cohérents que les inversions 3D : l'inversion 4D fournit en particulier des impédances P pour les grès saturés en CO2 qui sont très proches des

  11. La coopétition au service du bien commun. Les stratégies de entreprises de collecte et de stockage de céréales face aux OGM

    OpenAIRE

    Hannachi, Mourad

    2011-01-01

    Cette thèse a étudié comment des entreprises s’organisent pour gérer collectivement la présence ou l’absence des OGM au niveau du territoire agricole. A partir de plusieurs études de cas, cette recherche montre que des entreprises de collecte et de stockage ont pu fédérer, coordonner ou influencer l’ensemble des opérateurs pour gérer leur territoire. Nos résultats révèlent que cela passe par des relations de coopération entre des opérateurs en concurrence directe sur les marchés et des straté...

  12. Contribution de l'élevage bovin aux émissions de GES et au stockage de carbone selon les systèmes de production

    OpenAIRE

    Faverdin, Philippe; Agabriel, Jacques; Sauvant, Daniel; Klumpp, Katja

    2013-01-01

    Le bilan national des émissions de GES et du stockage de carbone de l’élevage bovin national s’élève à 39,5 millions de t CO2 eq. Les Analyses du Cycle de Vie (ACV) conduites évaluent l’empreinte carbone nette des systèmes laitiers entre 0,5 et 0,8 kg de CO2 eq/kg de lait, en diminution de 15 à 25 % entre 1990 et 2010, et celle des systèmes de production de viande entre 8,2 et 10,8 kg de CO2 eq/kg de viande vive. Il est nécessaire de raisonner les évaluations et les leviers d’atténuation de f...

  13. Reforestation et stockage du carbone au XXème siècle sur le versant sud du Mont-Lozère (France)

    OpenAIRE

    Martin, Claude; Didon-Lescot, Jean-François; Lhuillier, Sylvain; Usselmann, Pierre

    2002-01-01

    L'étude s'appuie sur les travaux réalisés sur le Bassin Versant de Recherche et Expérimental (BVRE) du Mont-Lozère. Les parcelles étudiées sont situées en terrain granitique, sous un climat de type méditerranéen montagnard, à des altitudes comprises entre 1100 et 1500 m. La dénudation des versants a atteint son maximum au milieu du XIXème siècle, époque où l'élevage ovin avec transhumance était particulièrement actif. La déprise rurale amorcée à la fin du XIXème siècle, a permis l'extension d...

  14. ATES Contribution to the Housing Energy Balance: a Simple Assessment Methodology Contribution du stockage d’énergie thermique en aquifère au bilan énergétique lié à l’habitat : méthodologie d’évaluation rapide

    Directory of Open Access Journals (Sweden)

    Bourbiaux B.

    2011-02-01

    Full Text Available The reduction of Green-House Gas Emissions (GHGE goes through a sum of solutions that need to be tuned to the local context in terms of energy needs and resources, and also to the demand and offer variations with time. The housing heat consumption is particularly concerned as it is seasonal and rarely in phase with the deliverability of alternative or renewable energy sources. This paper studies heat storage in saline untapped aquifers as a solution to overcome the time lag between production and consumption. This process applies to heat networks that supply dense housing complexes. Firstly, a methodology is described to size an Aquifer Thermal Energy Storage (ATES project as a function of the heat production and consumption characteristics on the one hand, and of the recovery factor of the stored heat on the other hand. The major role played by this recovery factor leads to a review of thermal losses of various origins and to a sensitivity study of influent reservoir parameters such as the aquifer thickness, productivity and heterogeneity, for the purpose of aquifer selection and storage project management. La reduction des Gaz a Effet de Serre (GES passe par un ensemble de solutions qui doivent etre adaptees au contexte local des besoins et ressources en energie, ainsi qu’aux variations de l’offre et la demande au cours du temps. Ce constat concerne en particulier la consommation d’energie calorifique destinee a l’habitat. En effet, cette consommation de chaleur est saisonniere et rarement en phase avec la disponibilite des sources d’energie alternatives ou renouvelables. Cet article etudie le stockage de chaleur dans des aquiferes salins inexploites en tant que solution pour pallier ce dephasage entre production et consommation. Ce procede concerne les reseaux de chaleur desservant un habitat concentre. En premier lieu, une methodologie quantitative est decrite pour dimensionner le projet de stockage d’energie thermique en

  15. Contribution au dimensionnement et à la gestion par optimisation de systèmes de stockage d'énergie pour les réseaux électriques ferroviaires

    OpenAIRE

    Bossi, Olivier

    2016-01-01

    L’intégration de systèmes de production décentralisés et de stockage d’énergie dansles réseaux d’électrification ferroviaires est envisagée comme une solution pour améliorerles performances électriques et énergétiques des réseaux électriques ferroviaire qui fontface à une forte augmentation de trafic. Cette solution doit permettre de réduire les coûtsd’investissement et d’exploitation des réseaux ferroviaires (moins de consommation, desrenforcements d’infrastructures limités) par rapport aux ...

  16. Have We Overestimated Saline Aquifer CO2 Storage Capacities? Avons-nous surestimé les capacités de stockage de CO2 des aquifères salins ?

    Directory of Open Access Journals (Sweden)

    Thibeau S.

    2011-03-01

    this approach, it is applied to the Utsira aquifer in the North Sea. In Sections 3 and 4, we discuss possible effects that may lead to higher or lower CO2 storage efficiencies. Water production appears to be an attractive strategy in order to address regional scale pressure build up and, consequently, to increase the storage capacity. Following these quantitative applications, we recommend to evaluate the CO2 storage capacities of an aquifer, during a screening study for ranking purposes, using a pressure and compressibility formula rather than a volumetric approach, in order to avoid large overestimation of the aquifer storage capacity. Further studies are naturally required to validate the storage capacities at a qualification stage. Au cours d’opérations à grande échelle de stockage géologique de CO2 dans des aquifères salins, la pression des fluides dans les formations va augmenter, mais devra rester sous des limites définies par des contraintes d’intégrité des sites de stockage. La hausse de pression est la conséquence de deux effets distincts. Premièrement, la pression augmente localement autour des injecteurs de CO2 pour permettre l’injection du CO2 dans les nappes. Cet effet peut être contrôlé en ajoutant des injecteurs de CO2. Deuxièmement, la pression va augmenter à une échelle régionale, soit parce que l’aquifère est fermée, soit parce que le flux d’eau s’échappant de la zone pressurisée ne compense pas volumétriquement le CO2 injecté. Ce second effet ne peut pas être maîtrisé en augmentant le nombre d’injecteurs. Dans la première section du papier, nous discutons sur des évaluations mondiales ou régionales de capacités de stockage du CO2 en aquifère, tant du point de vue de la quantité que de l’efficacité de stockage. Ces capacités sont principalement basées sur une approche volumétrique : la capacité de stockage est la somme des volumes de CO2 pouvant être stockés par différents processus de pi

  17. Adaptation des techniques de forage à la recherche et à l'équipement des stockages souterrains de gaz naturel Adapting Drilling Techniques to the Search for and Equipment of Underground Natural-Gas Storage Facilities

    Directory of Open Access Journals (Sweden)

    Grandin J.

    2006-11-01

    Full Text Available Pour répondre à la modulation annuelle de la consommation de gaz, le Gaz de France a décidé, il y a une trentaine d'années, de stocker du gaz, soit dans des nappes aquifères, soit dans des cavités salines. La recherche de structures géologiques aptes à recevoir ce gaz, la réalisation et l'équipement de puits d'exploration ou d'exploitation, l'entretien de ces puits et le contrôle des stockages ont été confiés au Département réservoirs souterrains de la Direction des études et techniques nouvelles. Les phases d'exploration et de développement d'un stockage souterrain nécessitent le forage de puits du type pétrolier. Ces sondages permettent, d'une part la récupération d'un maximum de renseignements concernant les différentes couches géologiques traversées et l'évaluation de leur aptitude à stocker le gaz, et d'autre part, d'assurer une exploitation optimale et fiable du stockage dans les meilleures conditions de sécurité. La pratique acquise dans l'exécution de ces forages par le Gaz de France lui a permis d'adapter aux stockages souterrains de nombreuses techniques des forages pétroliers. Parallèlement des procédés originaux ont pu être mis au point pour répondre à certaines exigences particulières du forage des puits de réservoirs souterrains, notamment à celles concernant le bon calibrage du trou foré ou la qualité des cimentations des cuvelages. L'article présente l'ensemble de ces adaptationset pratiques originales; bien que ne prétendant rien d'autre qu'apporter une contribution au chapitre problèmes particuliers des forages pour stockages souterrains de la technique pétrolière, certaines de celles-ci devraient pouvoir, en retour, trouver des applications intéressantes dans les forages pétroliers de moyenne profondeur. About 30 years ago and with a view to keep pace with the annual variation of gas consumption, Gaz de France decided to store gas in either aquifer layers or salt cavities. The

  18. Le stockage stationnaire d'énergie électrique : pourquoi et comment ?

    OpenAIRE

    Multon, Bernard; BEN AHMED, Hamid

    2007-01-01

    Les besoins de stockage d'énergie électrique dans les applications stationnaires sont nombreux et leur nécessité se révèle de plus en plus forte. Nous proposons d'abord d'examiner ces besoins dans le contexte d'évolution du système de production d'électricité vers une plus forte décentralisation et vers un plus fort taux de pénétration de sources fluctuantes indépendamment de la demande. Nous développons ensuite une analyse critique des caractéristiques générales des moyens de stockage avant ...

  19. Pressure Build-up and Decay in Acid Gas Injection Operations in Reefs in the Zama Field, Canada, and Implications for CO2 Storage Variations de pression au cours de l’injection de gaz acides dans le réservoir récifal duchamp de Zama, Canada. Implications pour le stockage géologique de CO2

    Directory of Open Access Journals (Sweden)

    Pooladi-Darvish M.

    2011-03-01

    pressure communication to geological storage of CO2 in aquifers are briefly discussed. Le but de l’article est de comprendre l’accroissement de pression dans le gisement de Zama X2X, utilisé pour le stockage degaz acide (NO de l’Alberta, Canada, et aussi d’examiner si la baisse de pression, observée ultérieurement,est la conséquence d’une dissipation par un aquifère de grande taille. Le gisement de Zama X2X, d’uneextension de 1 km2 environ, est connecté à quatre autres gisements voisins par l’intermédiaire d’un aquifère commun sous-jacent. L’analyse de la pression à travers tous ces gisements indique un bon niveau decommunication hydraulique. La pression initiale de l’accumulation de Zama X2X était d’environ 15 MPa.Pendant la production d’huile, la pression a commencé par décroître, pour se stabiliser vers 10 MPa audébut de la décennie 1970. Mais ensuite la pression a repris son ascension, jusqu’à atteindre 26 MPa en1986. Un nouvel épisode de baisse est alors intervenu et la pression s’est établie vers 22 MPa en 1995,au moment où l’on a commencé à injecter du gaz acide (80 % CO2 et 20 % H2S – l’opérateur, toutefois,injectait ce gaz à des débits et à des pressions en tête de puits qui se situaient en deçà des seuils autoriséspar l’Administration. En dépit d’une production significative d’eau et d’hydrocarbures, la pression à ZamaX2X est ensuite restée plus élevée que la pression vierge, d’au moins 5 MPa, au point qu’en 1998 les opérations d’injection de gaz furent suspendues. La production d’huile a cependant été maintenue jusqu’en 2002. Des simulations numériques effectuées avec CMG-IMEXTM, assorties d’une analyse de sensibilité,montrent ici que la ré-injection de plus de 1 million de m3 d’eau dans le gisement voisin de Zama YY,entre 1970 et 1988 puis en 1992-93, est la principale cause du comportement de la pression à Zama X2X.Les deux champs sont en effet connect

  20. Les frameworks au coeur des applications web

    OpenAIRE

    Moro, Arielle; Daehne, Peter

    2010-01-01

    Depuis quelques années, Internet est vraiment entré dans les mœurs : tant dans les entreprises qu’au sein de chaque foyer. En effet, Internet permet de communiquer à travers le monde en quelques secondes, de vendre toute sorte de produits en déployant des solutions e-commerce facilement et bien d’autres choses. Internet est donc un véritable vecteur de communication, de commerce et à présent, avec le Web 2.0, un vrai berceau d’informations (tant des informations personnelles que des informati...

  1. Ordered Au Nanodisk and Nanohole Arrays: Fabrication and Applications

    KAUST Repository

    Zheng, Yue Bing

    2010-01-01

    We have utilized nanosphere lithography (NSL) to fabricate ordered Au nanodisk and nanohole arrays on substrates and have studied the localized surface plasmon resonance (LSPR) of the arrays. Through these investigations, we demonstrate that the angle- dependent behavior of the LSPR in the Au nanodisk arrays enables real-time observation of exciton-plasmon couplings. In addition, we show that the NSL-fabricated Au nanohole arrays can be applied as templates for patterning micro-/nanoparticles under capillary force. The unique structural and plasmonic characteristics of the Au nanodisk and nano- hole arrays, as well as the low-cost and high-throughput NSL-based nanofabrication technique, render these arrays excellent platforms for numerous engineering applications. © 2010 by ASME.

  2. Natural Gas Storage Seismic Monitoring Suivi sismique des stockages de gaz naturel

    Directory of Open Access Journals (Sweden)

    Mari J.L.

    2011-02-01

    té conçues et utilisées de façon continue pendant plusieurs années pour suivre le cycle remplissage/extraction du stockage. Les dispositifs permanents ont permis d’améliorer la précision des mesures de temps d’arrivée jusqu’au dixième de milliseconde. L’arrivée de gaz dans un aquifère se traduit par une rapide variation de vitesse, qui a un impact à la fois sur les temps d’arrivée des réflexions sous les réservoirs et sur les amplitudes aux limites du réservoir. Les mouvements ultérieurs du contact gaz/eau avec le cycle de remplissage/soutirage sont plus difficiles à suivre et nécessitent une excellente précision des mesures de temps d’arrivée des réflexions. L’inversion de ces mesures pour l’estimation des saturations en gaz et en eau est délicate. Cette inversion a été tentée, avec un certain succès, dans le cas de Céré-la-Ronde. Du fait de la densité du dioxyde de carbone, au-delà d’une profondeur de 800 mètres environ, cette inversion risque d’être encore plus délicate pour les stockages de CO2 que pour les stockages de gaz naturel.

  3. MICROANALYSE DE VERRES POUR LE STOCKAGE DES DÉCHETS DE HAUTE ACTIVITÉ

    OpenAIRE

    Morlevat, J.

    1984-01-01

    L'homogénéité et la stabilité thermique de verres inactifs destinés au stockage de produits de fission ont été étudiées par microanalyse X. Pour les verres traités à des températures supérieures à 600°C, les cristaux formés peuvent être visualisés par microscopie électronique à balayage conventionnelle ; à plus basse température il est nécessaire d'utiliser la microscopie à transmission. La formation de molybdate et d'oxyde mixte (U, Ce) O2 a été mise en évidence dans tout l'intervalle de tem...

  4. Principe d'alimentation par convertisseurs multiniveaux à stockage intégré - Application aux accélérateurs de particules

    CERN Document Server

    Fahrni, Claude

    Facilities operating in cycles, such as particles accelerators, require pulsed power. Directly drawing this pulsed power from the industrial network is generally not acceptable. A system with a local energy storage system lessens the impact on the network. In this work, a power supply is proposed that allows pulsed operation of a proton synchrotron without disturbing the industrial network with large variations of active power. The context of this study is the search of a completely static replace ment of an existing inertial energy storage device. The application is the proton synchrotron of the CERN. Several solutions to store the energy needed by the proton synchrotron are studied, they include inertial energy storage, capacitive energy storage and magnetic energy storage. On this basis, the solution based on capacitive energy storage with interleaved multilevel converters is retained. The sizing of the storage elements and the filter is carried out. The control strategies are studied and designed. They ar...

  5. Fe/Au Core-Shell Nanoparticles for Biomedical Applications

    Science.gov (United States)

    Sra, Amandeep; Leslie-Pelecky, Diandra

    2009-10-01

    The physical properties of nanoparticles, including size, composition and surface chemistry, greatly influence biological and pharmacological properties and, ultimately, their clinical applications. Superparamagnetic iron oxide nanoparticles are widely used for applications such as MRI contrast agents, drug delivery via magnetic targeting and hyperthermia due to their chemical stability and biocompatibility; however, enhancing the saturation magnetization (Ms) of nanoparticles would produce greater sensitivity. Our design strategy involves a bottom-up wet chemistry approach to the synthesis of Fe nanoparticles. Specific advantages of Fe are the high value of Ms (210 emu/g in bulk) coupled with low toxicity; however, Fe nanoparticles must be protected from oxidation, which causes a dramatic reduction in Ms. To circumvent oxidation, Fe nanoparticles are coated with a Au shell that prevents the oxidation of the magnetic core and also provides the nanoparticles with plasmonic properties for optical stimulation. Ligands of various functionalities can be introduced through the well established Au-thiol surface chemistry for different biomedical applications while maintaining the magnetic functionality of the Fe core. In this presentation, we will discuss the physical, chemical and magnetic properties of our Fe/Au nanoparticles and their resistance to oxidation.

  6. Bright, NIR-emitting Au23 from Au25: characterization and applications including biolabeling.

    Science.gov (United States)

    Muhammed, Madathumpady Abubaker Habeeb; Verma, Pramod Kumar; Pal, Samir Kumar; Kumar, R C Arun; Paul, Soumya; Omkumar, Ramakrishnapillai Vyomakesannair; Pradeep, Thalappil

    2009-10-01

    A novel interfacial route has been developed for the synthesis of a bright-red-emitting new subnanocluster, Au(23), by the core etching of a widely explored and more stable cluster, Au(25)SG(18) (in which SG is glutathione thiolate). A slight modification of this procedure results in the formation of two other known subnanoclusters, Au(22) and Au(33). Whereas Au(22) and Au(23) are water soluble and brightly fluorescent with quantum yields of 2.5 and 1.3 %, respectively, Au(33) is organic soluble and less fluorescent, with a quantum yield of 0.1 %. Au(23) exhibits quenching of fluorescence selectively in the presence of Cu(2+) ions and it can therefore be used as a metal-ion sensor. Aqueous- to organic-phase transfer of Au(23) has been carried out with fluorescence enhancement. Solvent dependency on the fluorescence of Au(23) before and after phase transfer has been studied extensively and the quantum yield of the cluster varies with the solvent used. The temperature response of Au(23) emission has been demonstrated. The inherent fluorescence of Au(23) was used for imaging human hepatoma cells by employing the avidin-biotin interaction. PMID:19711391

  7. Photochemical preparation and application research of Au nanoparticles

    Institute of Scientific and Technical Information of China (English)

    DONG; Shou-an; SUN; Jia-lin

    2005-01-01

    Gold nanoparticles protected by organic small molecular compounds or macromolecule have attracted considerable attention and their preparation is one of hotspots in the nano-chemical material field due to their ongoing and potential applications in optics, electronics, catalysts and biosensors. In recent years there are many liquid phase chemistry methods to prepare monodispersed gold particles. Among them, the photochemical method is quite attractive because of its some important advantages for size-controlled synthesis of gold nanoparticles. Therefore, in this paper the recert progress of the photochemical preparing Au nanoparticle materials was briefly introduced and mainly emphasized authors' own works of this area.

  8. TiAu based shape memory alloys for high temperature applications

    International Nuclear Information System (INIS)

    TiAu (equiatomic) exhibits phase transformation from B2 (ordered bcc) to thermo-elastic orthorhombic B19 martensite at about 875K and thus TiAu is categorized as high temperature shape memory alloy. In this study, recent research and developments related to TiAu based high temperature shape memory alloys will be discussed in the Introduction part. Then some results of our research group related to strengthening of TiAu based high temperature shape memory alloys will be presented. Potential of TiAu based shape memory alloys for high temperature shape memory materials applications will also be discussed. (author)

  9. TiAu based shape memory alloys for high temperature applications

    International Nuclear Information System (INIS)

    TiAu (equiatomic) exhibits phase transformaion from B2 (ordered bcc) to thermo-elastic orthorhombic B19 martensite at about 875K and thus TiAu is categorized as high temperature shape memory alloy. In this study, recent research and developments related to TiAu based high temperature shape memory alloys will be discussed in the Introduction part. Then some results of our research group related to strengthening of TiAu based high temperature shape memory alloys will be presented. Potential of TiAu based shape memory alloys for high temperature shape memory materials applications will also be discussed

  10. Thermal stability of Mo/Au bilayers for TES applications

    International Nuclear Information System (INIS)

    Mo/Au bilayers are among the most suitable materials to be used as transition-edge sensors (TES) in cryogenic microcalorimeters and bolometers, developed, among other fields, for space missions. For this purpose the thermal stability of TES at temperatures below 150 °C is a critical issue. We report on the dependence of functional properties (superconducting critical temperature, residual resistance and α) as well as on microstructure, chemical composition and interface quality for optimized high quality Mo/Au bilayers on annealing temperature and time. Data show that the functional properties of the bilayers remain stable at T C at T ≥ 200 °C are mainly due to an increase in the average Au grain size and to Au migration along the Mo grain boundaries at the Au/Mo interface. A way to stabilize the functional properties of the Mo/Au bilayers against temperature enhancements is proposed. (paper)

  11. Enzymatic deposition of Au nanoparticles on the designed electrode surface and its application in glucose detection.

    Science.gov (United States)

    Zhang, Hongfang; Liu, Ruixiao; Sheng, Qinglin; Zheng, Jianbin

    2011-02-01

    This paper reported the enzymatic deposition of Au nanoparticles (AuNPs) on the designed 3-mercapto-propionic acid/glucose oxidase/chitosan (MPA/GOD/Chit) modified glassy carbon electrode and its application in glucose detection. Chit served as GOD immobilization matrix and interacted with MPA through electrostatic attraction. AuNPs, without nano-seeds presented on the electrode surface, was produced through the glucose oxidase catalyzed oxidation of glucose. The mechanism of production of AuNPs was confirmed to be that enzymatic reaction products H(2)O(2) in the solution reduce gold complex to AuNPs. The characterizations of the electrode modified after each assembly step was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy showed the average particle size of the AuNPs is 40nm with a narrow particle size distribution. The content of AuNPs on the electrode surfaces was measured by differential pulse stripping voltammetry. The electrochemical signals on voltammogram showed a linear increase with the glucose concentration in the range of 0.010-0.12mM with a detection limit of 4μM. This provided a method to the determination of glucose. PMID:21115279

  12. Application of Cryopreserved Fibroblast Culture with Au Nanoparticles to Treat Burns.

    Science.gov (United States)

    Volkova, Nataliia; Yukhta, Mariia; Pavlovich, Olena; Goltsev, Anatoliy

    2016-12-01

    The aim was to investigate a possibility of using the cryopreserved human culture of fibroblasts (CrHFC) with gold nanoparticles (AuNPs) to treat experimental burns in rats.The third-degree burns were modeled in white male rats. All the animals with burns were divided into three experimental groups: control group with no wound treatment; group 1 was composed of animals with CrHFC application; and group 2 consisted of those with CrHFC and AuNPs (6 μg/ml) application to a burn surface the next day after the injury. The CrHFC was applied to the methylcellulose gel in a dose of 5 × 10(4) of viable cells per 1 cm(2) of the burn. The animals were removed from the experiment on day 21 after the treatment.The CrHFC use alone and with AuNPs to the surface of burns stimulated the wound healing compared with the control. The effect of using CrHFC was less pronounced compared to the CrHFC application with AuNPs. It was reflected in a slower recovery of burns and moderate lymphocytic infiltration of granulation tissue. Immunofluorescent analysis emphasized that the use of CrHFC with AuNPs accelerated the skin synthetic processes and was helpful in recovering type I and III collagen content on day 21 after therapy.The results were likely related primarily to the unique structure and antimicrobial properties of AuNPs. Our experimental study of the effect of CrHFC with AuNPs application on regenerative processes in burns gives some pre-conditions to the following advanced bio- and nanotechnology developments. PMID:26762263

  13. Impact of cementitious materials decalcification on transfer properties: application to radioactive waste deep repository; Influence de la decalcification de materiaux cimentaires sur les proprietes de transfert: application au stockage profond de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Perlot, C

    2005-09-15

    Cementitious materials have been selected to compose the engineering barrier system (EBS) of the French radioactive waste deep repository, because of concrete physico-chemical properties: the hydrates of the cementitious matrix and the pH of the pore solution contribute to radionuclides retention; furthermore the compactness of these materials limits elements transport. The confinement capacity of the system has to be assessed while a period at least equivalent to waste activity (up to 100.000 years). His durability was sustained by the evolution of transfer properties in accordance with cementitious materials decalcification, alteration that expresses structure long-term behavior. Then, two degradation modes were carried out, taking into account the different physical and chemical solicitations imposed by the host formation. The first mode, a static one, was an accelerated decalcification test using nitrate ammonium solution. It replicates the EBS alteration dues to underground water. Degradation kinetic was estimated by the amount of calcium leached and the measurement of the calcium hydroxide dissolution front. To evaluate the decalcification impact, samples were characterized before and after degradation in term of microstructure (porosity, pores size distribution) and of transfer properties (diffusivity, gas and water permeability). The influence of cement nature (ordinary Portland cement, blended cement) and aggregates type (lime or siliceous) was observed: experiments were repeated on different mortars mixes. On this occasion, an essential reflection on this test metrology was led. The second mode, a dynamical degradation, was performed with an environmental permeameter. It recreates the EBS solicitations ensured during the re-saturation period, distinguished by the hydraulic pressure imposed by the geologic layer and the waste exothermicity. This apparatus, based on triaxial cell functioning, allows applying on samples pressure drop between 2 and 10 MPa and temperature from 20 to 80 C. Water permeability evolution relating to experimental parameters, uncoupled or coupled, was relied to mortars microstructural modifications. (author)

  14. The reactivity of clay materials in a context of metallic corrosion: application to disposal of radioactive wastes in deep argillaceous formations; Reactivite des materiaux argileux dans un contexte de corrosion metallique: application au stockage des dechets radioactifs en site argileux

    Energy Technology Data Exchange (ETDEWEB)

    Perronnet, M

    2004-10-15

    In order to confine radioactive wastes in deep settings, it is envisaged to use some natural clay materials and bentonites. Their stability when in contact with metallic iron, main component of the canisters, is studied. These studies show that the reactivity of such materials is mainly controlled by those of their di-octahedral smectites and kaolinites. On the contrary, the presence of sulfides stops the Fe(0)-clays reaction. The kind of reaction products depends on the quantity of available metallic iron. When pH is over 7, the Fe(0) is oxidized consecutive to a physical contact with the oxidant agents of the smectite (H{sup +}, OH{sup -} et Fe{sup 3+}). This reaction is favored by the heterogeneities of the lateral surfaces of the smectite, which then describes a micro-environments in which some serpentines grow up if the iron supply is sufficient. Such new-crystallization imply a decrease of the confinement properties of the clay barrier. (author)

  15. Water/polyethylene system radiolysis: application to the tritiated water storage in polyethylene bottle; Radiolyse du systeme eau/polyethylene: application au stockage d'eau tritiee en bonbonne polyethylene

    Energy Technology Data Exchange (ETDEWEB)

    Billamboz, N.

    2007-04-15

    This study deals with the validation and the search of the limitations for the storage of tritiated water (HTO) in polyethylene (PE) containers. The hydroxyl radical (HO{sup .}), produced during the radiolysis of water, is known for its reactivity toward alkanes in water. Our competition experiments (with SCN{sup -} or coumarin) by pulse radiolysis shows the reactivity of HO{sup .} with PE, which gives rise to chemical modifications of PE. Some FTIR analysis of PE, irradiated in the presence of water, show that the amounts of C=C, C-O, and C=O functions are more important when the production of HO{sup .} is favoured. Moreover the reactivity of e{sub aq}{sup -} in the presence of PE has also been highlighted by time resolved spectroscopy. The study of permeability of the HTO/PE system shows that the volumetric activity within PE is 10{sup 4} fold lower than the water activity after a one year immersion in 1853 Ci.L{sup -1} HTO. The MCNP simulation of the irradiation by the {beta}{sup -} of the tritium points out that 200 kGy is deposited within the first 250 nanometers of the PE. In spite of an early diffusion these results show a very weak solubility. Furthermore the value of the diffusion decreases following the modifications induced by the {beta}{sup -} at the surface. Crosslinking is a parameter that directly acts on the diffusion of molecules through the polymer. We have adapted and used the thermo-poro-metry technique in order to assess the crosslinking of PE. Using this investigation we have characterized the cross linking as a function of the dose, especially with respect to the mesh size distribution. We have also established a relationship allowing the determination of the crosslinking density in a swelled PE sample by p-xylene by DSC analysis. (author)

  16. Nitrite ion-induced fluorescence quenching of luminescent BSA-Au(25) nanoclusters: mechanism and application.

    Science.gov (United States)

    Unnikrishnan, Binesh; Wei, Shih-Chun; Chiu, Wei-Jane; Cang, Jinshun; Hsu, Pang-Hung; Huang, Chih-Ching

    2014-05-01

    Fluorescence quenching is an interesting phenomenon which is highly useful in developing fluorescence based sensors. A thorough understanding of the fluorescence quenching mechanism is essential to develop efficient sensors. In this work, we investigate different aspects governing the nitrite ion-induced fluorescence quenching of luminescent bovine serum albumin stabilized gold nanoclusters (BSA-Au NCs) and their application for detection of nitrite in urine. The probable events leading to photoluminescence (PL) quenching by nitrite ions were discussed on the basis of the results obtained from ultraviolet-visible (UV-Vis) absorption spectroscopy, X-ray photoelectron spectroscopy (XPS), fluorescence measurements, circular dichroism (CD) spectroscopy, zeta potential and dynamic light scattering (DLS) studies. These studies suggested that PL quenching mainly occurred through the oxidation of Au(0) atoms to Au(i) atoms in the core of BSA-Au NCs mediated by nitrite ions. The interference caused by certain species such as Hg(2+), Cu(2+), CN(-), S(2-), glutathione, cysteine, etc. during the nitrite determination by fluorescence quenching was eliminated by using masking agents and optimising the conditions. Based on these findings we proposed a BSA-Au NC-modified membrane based sensor which would be more convenient for the real life applications such as nitrite detection in urine samples. The BSA-Au NC-modified nitrocellulose membrane (NCM) enabled the detection of nitrite at a level as low as 100 nM in aqueous solutions. This Au NC-based paper probe was validated to exhibit good performance for nitrite analysis in environmental water and urine samples, which makes it useful in practical applications. PMID:24634911

  17. Application of 198Au grains for carcinoma of oral cavity

    International Nuclear Information System (INIS)

    The purpose of this study is to analyze the results of the treatment using gold grain implants over the past 9 years and to evaluate the usefulness of this treatment method. From January 1985 through April 1993, a total of 45 patients with squamous cell carcinomas of the oral cavity and the oropharynx were treated with 198Au grain (gold grain) at the Department of Radiology, Osaka University Medical School. The initial activity of the grains supplied weekly by the Japan Radioisotope Association was usually 5 mCi (185 MBq), and single implants were usual. In case of combined external irradiation, telecobalt γ-rays or 4 MV X-rays were used for treatment before implant. The local control rate for patients with T1 stages was 80% (20/25) and with T2 stages, 59% (10/17). The local control rate was 71% (10/14) for gold grain alone and 72% (13/18) for external irradiation combined with gold grain implants (combined therapy). In combined therapy, the median of the interval between external irradiation and gold grain implants was 21 days. The treatment interval or patients with recurrent diseases was 22 days, 22, 27, 39 and 46, respectively. The progression rate showed a tendency to increase in the patients with longer interval (more than 21 days), and with partial regression after external irradiation and gold grain implantation is an important factor in combined therapy. Therefore, we emphasize that the time interval should be shorter than 3 weeks. (orig.)

  18. Application of radioisotopes Au -198 to radiometrical field investigation of spraying machine

    Energy Technology Data Exchange (ETDEWEB)

    Goraczko, W.; Kocorowska, E. [Technical Univeristy, Poznan (Poland). Radio and Photo-Chemistry Department

    1997-10-01

    The poster shows application of radioisotope {sup 198}Au to radiometrical field testing of spraying machine. In the research was tested the Polish suspensioned tractor OZS400 type spraying machine. The machine worked in two different variants: without and with the beam stabilisation (oscillatory stabilisation)

  19. Application of radioisotopes Au -198 to radiometrical field investigation of spraying machine

    International Nuclear Information System (INIS)

    The poster shows application of radioisotope 198Au to radiometrical field testing of spraying machine. In the research was tested the Polish suspensioned tractor OZS400 type spraying machine. The machine worked in two different variants: without and with the beam stabilisation (oscillatory stabilisation)

  20. Au coated Ni nanowires with tuneable dimensions for biomedical applications

    NARCIS (Netherlands)

    Pondman, K.M.; Maijenburg, A.W.; Celikkol, F.B.; Pathan, A.A.; Kishore, U.D.; Haken, ten B.; Elshof, ten J.E.

    2013-01-01

    Due to their shape anisotropy, high aspect ratio magnetic nanoparticles offer many advantages in biomedical applications. For biocompatibility, it is essential to have full control over the dimensions and surface chemistry of the particles. The aim of this study was to synthesize biocompatible nanow

  1. Au coated Ni nanowires with tuneable dimensions for biomedical applications

    OpenAIRE

    Pondman, K.M.; Maijenburg, A.W.; Celikkol, F.B.; Pathan, A A; Kishore, U.D.; Haken, ten, Bennie; Elshof, ten, J.E.

    2013-01-01

    Due to their shape anisotropy, high aspect ratio magnetic nanoparticles offer many advantages in biomedical applications. For biocompatibility, it is essential to have full control over the dimensions and surface chemistry of the particles. The aim of this study was to synthesize biocompatible nanowires with tuneable dimensions. This was achieved by electrodeposition of Ni in polycarbonate membranes. To ensure biocompatibility, a continuous gold coating was deposited onto the Ni wires by a ne...

  2. Pilotage dynamique d'un système automatisé de stockage/déstockage à convoyeur gravitationnel

    OpenAIRE

    Hachemi, Khalid; Alla, Hassane

    2008-01-01

    Dans cet article, nous proposons une structure de pilotage d'un système automatisé de stockage/déstockage (AS/RS) à convoyeur gravitationnel basé sur un modèle réseau de Petri Coloré (RdPC). Le modèle RdPC de l'AS/RS est utilisé comme observateur d'état pour fournir l'état du rack dans un système de contrôle en boucle fermée. Nous introduisons dans le système de contrôle un bloc d'optimisation comme processus de décision qui effectue périodiquement, une optimisation temps réel. L'objectif de ...

  3. Colloidal Au-enhanced surface plasmon resonance imaging: application in a DNA hybridization process

    International Nuclear Information System (INIS)

    The detection of the DNA hybridization mechanism using monodispersed gold nanoparticles as labels is an interesting alternative to increase the sensitivity of the SPR imaging technique. DNA-modified Au nanoparticles (DNA-Au NPs) containing single-stranded (ss) portions of DNA were prepared by monitoring their monolayer formation by UV–vis spectroscopy. The hybridization process between specific thio-oligonucleotides immobilized on the DNA–Au NPs and the corresponding complementary strands is reported and compared with the traditional hybridization process on properly self-assembled thin gold films deposited on glass substrates. A remarkable signal amplification is observed, following the incorporation of colloidal Au into a SPR biosensing experiment, resulting in an increased SPR response to DNA–DNA interactions. In particular Fusarium thiolated DNA (5'HS poly(T)15ATC CCT CAA AAA CTG CCG CT-3) and trichothecenes complementary DNA (5'-AGC GGC AGT TTT TGA GGG AT-3') sequences have been explored due to their possible application to agro-industry for the control of food quality

  4. Large coincidence lattice on Au/Fe3O4 incommensurate structure for spintronic applications

    Science.gov (United States)

    Muñoz-Noval, Alvaro; Rubio-Zuazo, Juan; Salas-Colera, Eduardo; Serrano, Aida; Rubio-Marcos, Fernando; Castro, Germán R.

    2015-11-01

    The design of metallic hybrid systems for spintronics has been widely studied during the past decade, motivated by the promising technological applications of these materials. Nevertheless, the importance of preserving the native structure and properties of the interfaces is often ignored. Here, we present the fabrication of nanocrystalline Au (0 0 1) onto a single oriented Fe3O4 (0 0 1) thin film as a promising hybrid system to develop spintronic devices by growing Au over the Fe3O4 by using a simple one-pot Pulsed Laser Deposition (PLD) approach. The structural coupling between Au nanocrystals and Fe3O4 layer results in the development of an incommensurate structure based on a coincidence lattice of order 35, which preserves the intrinsic properties of the Au nanocrystals, the Fe3O4 matrix and the interface between them. The general strategy described in the present work preserves the structure and main intrinsic properties of the constituting materials, being a fundamental issue for the future development of spintronic devices.

  5. Colloidal Au-enhanced surface plasmon resonance imaging: application in a DNA hybridization process

    Science.gov (United States)

    Manera, M. G.; Spadavecchia, J.; Taurino, A.; Rella, R.

    2010-03-01

    The detection of the DNA hybridization mechanism using monodispersed gold nanoparticles as labels is an interesting alternative to increase the sensitivity of the SPR imaging technique. DNA-modified Au nanoparticles (DNA-Au NPs) containing single-stranded (ss) portions of DNA were prepared by monitoring their monolayer formation by UV-vis spectroscopy. The hybridization process between specific thio-oligonucleotides immobilized on the DNA-Au NPs and the corresponding complementary strands is reported and compared with the traditional hybridization process on properly self-assembled thin gold films deposited on glass substrates. A remarkable signal amplification is observed, following the incorporation of colloidal Au into a SPR biosensing experiment, resulting in an increased SPR response to DNA-DNA interactions. In particular Fusarium thiolated DNA (5'HS poly(T)15ATC CCT CAA AAA CTG CCG CT-3) and trichothecenes complementary DNA (5'-AGC GGC AGT TTT TGA GGG AT-3') sequences have been explored due to their possible application to agro-industry for the control of food quality.

  6. AZO/Au/AZO tri-layer thin films for the very low resistivity transparent electrode applications

    International Nuclear Information System (INIS)

    Highlights: • High-quality Al-doped ZnO (AZO)/Au/AZO transparent conducting oxide films. • AZO films (30 nm) made by RF sputtering; ion sputtering for Au film (5–20 nm). • Effects of Au thickness on optical and electrical properties were analyzed. • The resistivity of 9 × 10−5 Ω cm and the transmittance of 86.2% of the multilayer films were obtained in this study. - Abstract: Aluminum-doped ZnO (AZO)/gold/AZO tri-layer structures with very low resistivity and high transmittance are prepared by simultaneous RF magnetron sputtering (for AZO) and ion sputtering (for Au). The properties of the tri-layer films are investigated at different Au layer thicknesses (5–20 nm). The effects of Au layer thickness and the role of Au on the transmission properties of the tri-layer films were investigated. The very low resistivity of 1.01 × 10−5 Ω cm, mobility of 27.665 cm2 V−1 s−1, and carrier concentration of 4.563 × 1022 cm−3 were obtained at an Au layer thickness of 20 nm. The peak transmittance of 86.18% at 650-nm wavelength was obtained at an Au layer thickness of 8 nm. These results show the films to be a good candidate for high-quality electrode scheme in various display applications

  7. AZO/Au/AZO tri-layer thin films for the very low resistivity transparent electrode applications

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chien-Hsun [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Wu, Hung-Wei, E-mail: hwwu@mail.ksu.edu.tw [Department of Computer and Communication, Kun Shan University, Tainan 71003, Taiwan (China); Huang, Jow-Lay [Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Department of Chemical and Materials Engineering, National University of Kaohsiung, Kaohsiung 81148, Taiwan (China); Research Center for Energy Technology and Strategy, National Cheng Kung University, Tainan 70101, Taiwan (China)

    2014-08-01

    Highlights: • High-quality Al-doped ZnO (AZO)/Au/AZO transparent conducting oxide films. • AZO films (30 nm) made by RF sputtering; ion sputtering for Au film (5–20 nm). • Effects of Au thickness on optical and electrical properties were analyzed. • The resistivity of 9 × 10{sup −5} Ω cm and the transmittance of 86.2% of the multilayer films were obtained in this study. - Abstract: Aluminum-doped ZnO (AZO)/gold/AZO tri-layer structures with very low resistivity and high transmittance are prepared by simultaneous RF magnetron sputtering (for AZO) and ion sputtering (for Au). The properties of the tri-layer films are investigated at different Au layer thicknesses (5–20 nm). The effects of Au layer thickness and the role of Au on the transmission properties of the tri-layer films were investigated. The very low resistivity of 1.01 × 10{sup −5} Ω cm, mobility of 27.665 cm{sup 2} V{sup −1} s{sup −1}, and carrier concentration of 4.563 × 10{sup 22} cm{sup −3} were obtained at an Au layer thickness of 20 nm. The peak transmittance of 86.18% at 650-nm wavelength was obtained at an Au layer thickness of 8 nm. These results show the films to be a good candidate for high-quality electrode scheme in various display applications.

  8. Shape and size controlled synthesis of Au nanorods: H2S gas-sensing characterizations and antibacterial application

    International Nuclear Information System (INIS)

    Highlights: • We have demonstrated a facile method to prepare colloid Au nanorods. • The size and shape of Au nanorods can be controlled via seed-mediated growth method. • The H2S gas-sensing properties have been investigated. • The antibacterial application has been conducted. - Abstract: Controlling their size and shape is one of the important issues in the fundamental study and application of colloidal metal nanoparticles. In the current study, different sizes and shapes of Au nanorods were fabricated using a seed-mediated growth method. Material characterization by X-ray diffraction and transmission electron microscopy revealed that the obtained products were made of single-crystal Au nanorods with an average diameter and length of 10 nm and 40 nm, respectively. The Au nanorod-based sensor exhibited significantly high sensitivity and fast response/recovery time to low concentrations (2.5–10 ppm) of H2S at temperatures ranging from 300 °C to 400 °C. Additionally, they exhibited antibacterial effect at low concentration. These results suggested that the fabricated Au nanorods have excellent potential for practical application in air pollution monitoring and biomedicine

  9. Shape and size controlled synthesis of Au nanorods: H{sub 2}S gas-sensing characterizations and antibacterial application

    Energy Technology Data Exchange (ETDEWEB)

    Lanh, Le Thi [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Hoa, Tran Thai, E-mail: trthaihoa@yahoo.com [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Cuong, Nguyen Duc [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Faculty of Hospitality and Tourism, Hue University, 22 Lam Hoang, Hue City (Viet Nam); Khieu, Dinh Quang [College of Sciences, Hue University, 77 Nguyen Hue, Hue City (Viet Nam); Quang, Duong Tuan [College of Education, Hue University, 34 Le Loi, Hue City (Viet Nam); Van Duy, Nguyen; Hoa, Nguyen Duc [International Training Institute for Materials Science, Hanoi University of Science and Technology, Hanoi (Viet Nam); Van Hieu, Nguyen, E-mail: hieu@itims.edu.vn [International Training Institute for Materials Science, Hanoi University of Science and Technology, Hanoi (Viet Nam)

    2015-06-25

    Highlights: • We have demonstrated a facile method to prepare colloid Au nanorods. • The size and shape of Au nanorods can be controlled via seed-mediated growth method. • The H{sub 2}S gas-sensing properties have been investigated. • The antibacterial application has been conducted. - Abstract: Controlling their size and shape is one of the important issues in the fundamental study and application of colloidal metal nanoparticles. In the current study, different sizes and shapes of Au nanorods were fabricated using a seed-mediated growth method. Material characterization by X-ray diffraction and transmission electron microscopy revealed that the obtained products were made of single-crystal Au nanorods with an average diameter and length of 10 nm and 40 nm, respectively. The Au nanorod-based sensor exhibited significantly high sensitivity and fast response/recovery time to low concentrations (2.5–10 ppm) of H{sub 2}S at temperatures ranging from 300 °C to 400 °C. Additionally, they exhibited antibacterial effect at low concentration. These results suggested that the fabricated Au nanorods have excellent potential for practical application in air pollution monitoring and biomedicine.

  10. Stabilité des huiles alimentaires au cours de leur stockage

    Directory of Open Access Journals (Sweden)

    Cuvelier Marie-Elisabeth

    2012-03-01

    Full Text Available Vegetable oils are chemically unstable due to the sensitivity to oxidation of their unsaturated fatty acids. The oxidative mechanisms are based on complex and radical reactions that always result in a significant loss of oil quality in both sensorial (rancidity and nutritional values (loss of polyunsaturated fatty acids and vitamin E. Monitoring the oxidation state of oil can be performed using different markers, each bringing a partial information of the whole phenomenon, but unable to predict by itself the future stability of the oil. The accelerated ageing tests used in reasonable heating conditions are useful for measuring the resistance of oil to oxidation but are difficult to extrapolate to normal storage conditions. The oxidative degradation of oil during storage can be delayed by protecting it from light, heat, oxygen and metals. Another way consists to increase the retention of endogenous antioxidants naturally contained in the oil seeds, such as tocopherols (vitamin E, which are partially removed during conventional operations of extraction and refining.

  11. Nanocomposite of Au Nanoparticles/Helical Carbon Nanofibers and Application in Hydrogen Peroxide Biosensor.

    Science.gov (United States)

    Zhai, Mumu; Cui, Rongjing; Gu, Ning; Zhang, Genhua; Lin, Wang; Yu, Lingjun

    2015-06-01

    A combined sol-gel/hydrogen reduction method has been developed for the mass production of helical carbon nanofibers (HCNFs) by the pyrolysis of acetylene at 425 degrees C in the presence of NiO nanoparticles. The synthesized HCNFs were characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The helical-structured carbon nanofibers have a large specific surface area and excellent biocompatibility. A novel enzymatic hydrogen peroxide sensor was then successfully fabricated based on the nanocomposites containing HCNFs and gold nanoparticles (AuNPs). The results indicated that the Au/HCNFs nanocomposites exhibited excellent electrocatalytic activity to the reduction of H2O2, offering a wide linear range from 1.0 μM to 3157 μM with a detection limit as low as 0.46 μM. The apparent Michaelis-Menten constant of the biosensor was 0.61 mM. The as-fabricated biosensor showed a rapid and sensitive amperometric response to hydrogen peroxide with acceptable preparation reproducibility and excellent stability. Because of their low cost and high stability, these novel HCNFs represent seem to be a kind of promising biomaterial and may find wide new applications in scopes such as biocatalysis, immunoassay, environmental monitoring and so on. PMID:26369097

  12. Electrical conductivity dependence of thin metallic films of Au and Pd as a top electrode in capacitor applications

    International Nuclear Information System (INIS)

    Electrical conductivity dependence of thin metallic films of Au and Pd over the different perovskites was investigated. It is found from electrical properties that crystallographic growth orientation of Au and Pd thin layers attained from X-ray diffraction results indicate the slop of current (I)-voltage (V) plots. Besides, surface morphology and topography was considered using Field Emission Scanning Electron Microscopy and Atomic Force Microscopy, respectively. Obtained results showed the Stranski-Krastanov growth of the Pd and Au. Indeed, diminishing of the root-mean-square roughness of Pd/BiMnO3/SrTiO3 following by Au deposition should be concerned due to growth of Au onto the crack-like parts of the substrate. These crack-like parts appeared due to parasitic phases of the Bi-Mn-O system mainly Mn3O4 (l 0 l) and Mn3O4 (0 0 4 l). The different response in the electrical properties of heterostructures suggests that electrical conductance of the Au and Pd thin metallic films have the crystallographic orientation dependence. Furthermore, polycrystallinity of the thin metallic films are desired in electrode applications due to increase the conductivity of the metallic layers.

  13. Confining Properties of Carbonated Dogger Caprocks (Parisian Basin for CO2 Storage Purpose Propriétés de confinement des couvertures du Dogger carbonaté (Bassin de Paris dans l’optique du stockage de CO2

    Directory of Open Access Journals (Sweden)

    Carles P.

    2010-05-01

    Full Text Available The Géocarbone-Intégrité project, funded by ANR (Agence Nationale de la Recherche from 2006 to 2008, has the overall objective of gaining knowledge and technology to predict storage integrity and safety for long term geological CO2 sequestration. The aim of this study (Sect. 1 and 2 of the project is to evaluate the sealing capacities of the carbonated Dogger caprocks located on top of the reservoirs where CO2 could be injected for storage purposes in the Parisian Basin. A petrographic analysis is done on 3 different cores from geological formations of the “Comblanchien and Dalle Nacrée” tight carbonates facies. At the same time, a petrophysical study of these facies is performed. Porosity, pore size distribution and permeability are determined using special devices adapted to low permeability and tight rocks ( Le projet Géocarbone-Intégrité, financé par l’Agence Nationale de la Recherche (ANR de 2006 à 2008, vise à développer les connaissances et les techniques nécessaires à la prévision de l’efficacité et la sécurité du confinement sur le long terme des stockages géologiques de CO2. La première tâche a été de caractériser à l’échelle pétrographique, les faciès carbonatés du sommet du Dogger appartenant aux formations des Calcaires du Comblanchien et de la Dalle Nacrée, situées immédiatement au-dessus des niveaux réservoirs retenus comme potentiels sites de stockage. Une étude pétrophysique précise des faciès de couvertures potentielles est réalisée. La porosité, la distribution de taille de pores et la perméabilité sont déterminées en utilisant des méthodes adaptées à des milieux très peu perméables (< 10 microDarcy. Les perméabilités sont mesurées à l’azote, à l’hélium et à la saumure sous pression de confinement avec la méthode stationnaire et la méthode transitoire. Les porosités sont faibles et varient de 2 à 9 % suivant le faciès, et les perméabilités en

  14. Au-SN Flip-Chip Solder Bump for Microelectronic and Optoelectronic Applications

    CERN Document Server

    Yoon, Jeong-Won; Koo, Ja-Myeong; Jung, Seung-Boo

    2007-01-01

    As an alternative to the time-consuming solder pre-forms and pastes currently used, a co-electroplating method of eutectic Au-Sn alloy was used in this study. Using a co-electroplating process, it was possible to plate the Au-Sn solder directly onto a wafer at or near the eutectic composition from a single solution. Two distinct phases, Au5Sn and AuSn, were deposited at a composition of 30at.%Sn. The Au-Sn flip-chip joints were formed at 300 and 400 degrees without using any flux. In the case where the samples were reflowed at 300 degrees, only an (Au,Ni)3Sn2 IMC layer formed at the interface between the Au-Sn solder and Ni UBM. On the other hand, two IMC layers, (Au,Ni)3Sn2 and (Au,Ni)3Sn, were found at the interfaces of the samples reflowed at 400 degrees. As the reflow time increased, the thickness of the (Au,Ni)3Sn2 and (Au,Ni)3Sn IMC layers formed at the interface increased and the eutectic lamellae in the bulk solder coarsened.

  15. Development of Methods for Gaseous Phase Geochemical Monitoring on the Surface and in the Intermediate Overburden Strata of Geological CO2 Storage Sites Développement de méthodes de suivi géochimique en phase gazeuse à la surface et dans la couverture intermédiaire des sites de stockage géologique du CO2

    Directory of Open Access Journals (Sweden)

    Pokryszka Z.

    2010-03-01

    de CO2 allant du domaine des émissions très faibles de 0,05 à 0,2 cm3.min−1.m−2 jusqu’à un niveau de flux extrêmement forts de 3000 cm3.min−1.m−2 environ. Ces caractéristiques métrologiques et opérationnelles ont été vérifiées et validées par les essais en laboratoire, sur un banc d’essais, mais aussi par les mesures sur le terrain dans les conditions réelles de sites naturellement émissifs du CO2. Ces essais ont montré une pleine maturité technique de la méthode pour une application pratique à la détection et au suivi des émissions de CO2 et de méthane à la surface du sol. Les deux méthodes expérimentées sont désormais opérationnelles et disponibles pour être intégrées dans la stratégie de surveillance de futurs sites de stockage de CO2. Elles peuvent en effet être utilisées dans toutes les étapes de la vie d’un site de stockage : la reconnaissance du site, l’établissement de l’état initial, l’injection, la phase post-injection et le suivi résiduel après l’abandon.

  16. Kinetically controlled synthesis of Au102(SPh)44 nanoclusters and catalytic application

    Science.gov (United States)

    Chen, Yongdong; Wang, Jin; Liu, Chao; Li, Zhimin; Li, Gao

    2016-05-01

    We here explore a kinetically controlled synthetic protocol for preparing solvent-solvable Au102(SPh)44 nanoclusters which are isolated from polydispersed gold nanoclusters by solvent extraction and size exclusion chromatography (SEC). The as-obtained Au102(SPh)44 nanoclusters are determined by matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) mass spectrometry, in conjunction with UV-vis spectroscopy and thermogravimetric analysis (TGA). However, Au99(SPh)42, instead of Au102(SPh)44, is yielded when the polydispersed gold nanoclusters are etched in the presence of excess thiophenol under thermal conditions (e.g., 80 °C). Interestingly, the Au102(SPh)44 nanoclusters also can convert to Au99(SPh)42 with equivalent thiophenol ligands, evidenced by the analyses of UV-vis and MALDI mass spectrometry. Finally, the TiO2-supported Au102(SPh)44 nanocluster catalyst is investigated in the selective oxidation of sulfides into sulfoxides by the PhIO oxidant and gives rise to high catalytic activity (e.g., 80-99% conversion of R-S-R' sulfides with 96-99% selectivity for R-S(&z.dbd;O)-R' sulfoxides). The Au102(SPh)44/TiO2 catalyst also shows excellent recyclability in the sulfoxidation process.We here explore a kinetically controlled synthetic protocol for preparing solvent-solvable Au102(SPh)44 nanoclusters which are isolated from polydispersed gold nanoclusters by solvent extraction and size exclusion chromatography (SEC). The as-obtained Au102(SPh)44 nanoclusters are determined by matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) mass spectrometry, in conjunction with UV-vis spectroscopy and thermogravimetric analysis (TGA). However, Au99(SPh)42, instead of Au102(SPh)44, is yielded when the polydispersed gold nanoclusters are etched in the presence of excess thiophenol under thermal conditions (e.g., 80 °C). Interestingly, the Au102(SPh)44 nanoclusters also can convert to Au99(SPh)42 with equivalent

  17. Synthesis of biocompatible AuAgS/Ag2S nanoclusters and their applications in photocatalysis and mercury detection

    International Nuclear Information System (INIS)

    In this paper, a facile approach for preparation of AuAgS/Ag2S nanoclusters was developed. The unique AuAgS/Ag2S nanoclusters capped with biomolecules exhibit interesting excellent optical and catalytic properties. The fluorescent AuAgS/Ag2S nanoclusters show tunable luminescence depending on the nanocluster size. The apoptosis assay demonstrated that the AuAgS/Ag2S nanoclusters showed low cytotoxicity and good biocompatibility. Therefore, the nanoclusters can be used not only as a probe for labeling cells but also for their photocatalytic activity for photodegradation of organic dye. Moreover, a highly selective and sensitive assay for detection of mercury including Hg2+ and undissociated mercury complexes was developed based on the quenching fluorescent AuAgS/Ag2S nanoclusters, which provides a promising approach for determining various forms of Hg in the mercury-based compounds in environment. These unique nanoclusters may have potential applications in biological labeling, sensing mercury, and photodegradation of various organic pollutants in waste water.Graphical Abstract

  18. Synthesis of biocompatible AuAgS/Ag{sub 2}S nanoclusters and their applications in photocatalysis and mercury detection

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Qian; Chen, Shenna; Zhang, Lingyang; Huang, Haowen, E-mail: hhwn09@163.com; Liu, Fengping [Hunan University of Science and Technology, Key Laboratory of Theoretical Organic Chemistry and Function Molecule, Ministry of Education, Hunan Provincial University Key Laboratory of QSAR/QSPR, School of Chemistry and Chemical Engineering (China); Liu, Xuanyong, E-mail: xyliu@mail.sic.ac.cn [Chinese Academy of Sciences, State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics (China)

    2014-12-15

    In this paper, a facile approach for preparation of AuAgS/Ag{sub 2}S nanoclusters was developed. The unique AuAgS/Ag{sub 2}S nanoclusters capped with biomolecules exhibit interesting excellent optical and catalytic properties. The fluorescent AuAgS/Ag{sub 2}S nanoclusters show tunable luminescence depending on the nanocluster size. The apoptosis assay demonstrated that the AuAgS/Ag{sub 2}S nanoclusters showed low cytotoxicity and good biocompatibility. Therefore, the nanoclusters can be used not only as a probe for labeling cells but also for their photocatalytic activity for photodegradation of organic dye. Moreover, a highly selective and sensitive assay for detection of mercury including Hg{sup 2+} and undissociated mercury complexes was developed based on the quenching fluorescent AuAgS/Ag{sub 2}S nanoclusters, which provides a promising approach for determining various forms of Hg in the mercury-based compounds in environment. These unique nanoclusters may have potential applications in biological labeling, sensing mercury, and photodegradation of various organic pollutants in waste water.Graphical Abstract.

  19. L’énergie : stockage électrochimique et développement durable

    OpenAIRE

    Corvol, Pierre; Tarascon, Jean-Marie

    2013-01-01

    Le stockage et la conversion de l’énergie sont un des grands défis scientifiques des prochaines décennies et un enjeu environnemental majeur. Quels nouveaux matériaux vont permettre de fabriquer des batteries plus efficaces et plus « propres » ? Jean-Marie Tarascon fait le point sur ces questions qui concernent notre avenir et celui de la planète. Il présente notamment les technologies à ions Lithium, l’apport des nanaotechnologies, et les recherches visant à l’élaboration des matériaux par d...

  20. AuCu@Pt Nanoalloys for Catalytic Application in Reduction of 4-Nitrophenol

    Directory of Open Access Journals (Sweden)

    Sadia Mehmood

    2016-01-01

    Full Text Available To enhance and optimize nanocatalyst ability for nitrophenol (4-NP reduction reaction we look beyond Au-metal nanoparticles and describe a new class of Au nanoalloys with controlled composition for core of AuCu-metals and Pt-metal shell. The reduction of 4-NP was investigated in aqueous media spectroscopically on 7.8 nm Au nanospheres (AuNSs, 8.3 nm AuCuNSs, and 9.1 nm AuCu@Pt core-shell NSs in diameter. The rate constants of the catalyzed reaction at room temperature, activation energies, and entropies of activation of reactions catalyzed by the AuCu@Pt core-shell NSs are found to have different values to those of the pure metal NSs. The results strongly support the proposal that catalysis by nanoparticles is taking place efficiently on the surface of NSs. These core-shell nanocatalysts exhibited stability throughout the reduction reaction and proved that heterogonous type mechanisms are most likely to be dominant in nanoalloy based catalysis if the surface of the NSs is not defected upon shell incorporation.

  1. Kinetically controlled synthesis of Au102(SPh)44 nanoclusters and catalytic application.

    Science.gov (United States)

    Chen, Yongdong; Wang, Jin; Liu, Chao; Li, Zhimin; Li, Gao

    2016-05-21

    We here explore a kinetically controlled synthetic protocol for preparing solvent-solvable Au102(SPh)44 nanoclusters which are isolated from polydispersed gold nanoclusters by solvent extraction and size exclusion chromatography (SEC). The as-obtained Au102(SPh)44 nanoclusters are determined by matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI) mass spectrometry, in conjunction with UV-vis spectroscopy and thermogravimetric analysis (TGA). However, Au99(SPh)42, instead of Au102(SPh)44, is yielded when the polydispersed gold nanoclusters are etched in the presence of excess thiophenol under thermal conditions (e.g., 80 °C). Interestingly, the Au102(SPh)44 nanoclusters also can convert to Au99(SPh)42 with equivalent thiophenol ligands, evidenced by the analyses of UV-vis and MALDI mass spectrometry. Finally, the TiO2-supported Au102(SPh)44 nanocluster catalyst is investigated in the selective oxidation of sulfides into sulfoxides by the PhIO oxidant and gives rise to high catalytic activity (e.g., 80-99% conversion of R-S-R' sulfides with 96-99% selectivity for R-S([double bond, length as m-dash]O)-R' sulfoxides). The Au102(SPh)44/TiO2 catalyst also shows excellent recyclability in the sulfoxidation process. PMID:26758553

  2. Electrical performance of Ti-ZnO-Au thin film composite structure for device application

    Science.gov (United States)

    Joshi, Priyanka; Singh, Jitendra; Das, Surajit; Desai, J. V.; Akhtar, Jamil

    2016-04-01

    Thin film layers of Au/Ti approximately 2200 Å thick and ZnO approximately 2.24 µm thick were sputtered sequentially onto silicon dioxide coated Si-wafer. Conventional wisdom confirms the adhesion of gold over zinc oxide (ZnO) by an intermediate layer of titanium for better adhesion. But, in Au/Ti/ZnO/Au/Ti structure, it was observed that with the passing of time the gold diffused into ZnO thin film at room temperature, making a very low resistance between the two gold layers eventually making a conductive path in ZnO. Therefore, electrical connectivity was found between the metal layers. A detailed experimental analysis has been carried out in support of the observed Au diffusion. In the present work, reliability of Ti/Au metallisation and anomalous electrical behavior due to gold diffusion has been studied.

  3. Crystallographic investigation of Au nanoparticles embedded in a SrTiO3 thin film for plasmonics applications by means of synchrotron radiation

    International Nuclear Information System (INIS)

    Self-organized monocrystalline Au nanoparticles with potential applications in plasmonics are grown in a SrTiO3 matrix by a novel two-step deposition process. The crystalline preferred orientation of these Au nanoparticles is investigated by synchrotron hard x-ray diffraction. Nanoparticles preferentially align with the (111) direction along the substrate normal (001), whereas two in-plane orientations are found with [110]SrTiO3∥[110]Au and [100]SrTiO3∥[110]Au. Additionally, a smaller diffraction signal from nanoparticles with the (001) direction parallel to the substrate normal (001) is observed; once again, two in-plane orientations are found, with [100]SrTiO3∥[100]Au and [100]SrTiO3∥[110]Au. The populations of the two in-plane orientations are found to depend on the thickness of the gold film deposited in the first step of the growth

  4. Facile Synthesis of Quasi-One-Dimensional Au/PtAu Heterojunction Nanotubes and Their Application as Catalysts in an Oxygen-Reduction Reaction.

    Science.gov (United States)

    Cai, Kai; Liu, Jiawei; Zhang, Huan; Huang, Zhao; Lu, Zhicheng; Foda, Mohamed F; Li, Tingting; Han, Heyou

    2015-05-11

    An intermediate-template-directed method has been developed for the synthesis of quasi-one-dimensional Au/PtAu heterojunction nanotubes by the heterogeneous nucleation and growth of Au on Te/Pt core-shell nanostructures in aqueous solution. The synthesized porous Au/PtAu bimetallic nanotubes (PABNTs) consist of porous tubular framework and attached Au nanoparticles (AuNPs). The reaction intermediates played an important role in the preparation, which fabricated the framework and provided a localized reducing agent for the reduction of the Au and Pt precursors. The Pt7 Au PABNTs showed higher electrocatalytic activity and durability in the oxygen-reduction reaction (ORR) in 0.1 M HClO4 than porous Pt nanotubes (PtNTs) and commercially available Pt/C. The mass activity of PABNTs was 218 % that of commercial Pt/C after an accelerated durability test. This study demonstrates the potential of PABNTs as highly efficient electrocatalysts. In addition, this method provides a facile strategy for the synthesis of desirable hetero-nanostructures with controlled size and shape by utilizing an intermediate template. PMID:25833689

  5. Fabrication of Te and Te-Au Nanowires-Based Carbon Fiber Fabrics for Antibacterial Applications

    Directory of Open Access Journals (Sweden)

    Ting-Mao Chou

    2016-02-01

    Full Text Available Pathogenic bacteria that give rise to diseases every year remain a major health concern. In recent years, tellurium-based nanomaterials have been approved as new and efficient antibacterial agents. In this paper, we developed the approach to directly grow tellurium nanowires (Te NWs onto commercial carbon fiber fabrics and demonstrated their antibacterial activity. Those Te NWs can serve as templates and reducing agents for gold nanoparticles (Au NPs to deposit. Three different Te-Au NWs with varied concentration of Au NPs were synthesized and showed superior antibacterial activity and biocompability. These results indicate that the as-prepared carbon fiber fabrics with Te and Te-Au NWs can become antimicrobial clothing products in the near future.

  6. Cu2O and Au/Cu2O Particles: Surface Properties and Applications in Glucose Sensing

    OpenAIRE

    Yu-Ho Won; Stanciu, Lia A.

    2012-01-01

    In this work we investigated the surface and facet-dependent catalytic properties of metal oxide particles as well as noble metal/metal oxide heterogeneous structures, with cuprous oxide (Cu2O) and Au/Cu2O being selected as model systems. As an example of application, we explored the potential of these materials in developing electrocatalytic devices. Cu2O particles were synthesized in various shapes, then used for testing their morphology-dependent electrochemical properties applied to the d...

  7. Lead Telluride Doped with Au as a Very Promising Material for Thermoelectric Applications

    Directory of Open Access Journals (Sweden)

    Pantelija M. Nikolic

    2015-01-01

    Full Text Available PbTe single crystals doped with monovalent Au or Cu were grown using the Bridgman method. Far infrared reflectivity spectra were measured at room temperature for all samples and plasma minima were registered. These experimental spectra were numerically analyzed and optical parameters were calculated. All the samples of PbTe doped with Au or Cu were of the “n” type. The properties of these compositions were analyzed and compared with PbTe containing other dopants. The samples of PbTe doped with only 3.3 at% Au were the best among the PbTe + Au samples having the lowest plasma frequency and the highest mobility of free carriers-electrons, while PbTe doped with Cu was the opposite. Samples with the lowest Cu concentration of 0.23 at% Cu had the best properties. Thermal diffusivity and electronic transport properties of the same PbTe doped samples were also investigated using a photoacoustic (PA method with the transmission detection configuration. The results obtained with the far infrared and photoacoustic characterization of PbTe doped samples were compared and discussed. Both methods confirmed that when PbTe was doped with 3.3 at% Au, thermoelectric and electrical properties of this doped semiconductor were both significantly improved, so Au as a dopant in PbTe could be used as a new high quality thermoelectric material.

  8. L'enjeu mondial des batteries au lithium - French version only

    CERN Multimedia

    2007-01-01

    A l'occasion de son Assemblée générale, Le Solar-Club CERN, ensemble avec le club ConCERNed for Humanity, ont le plaisir d'inviter tout les personnes intéressées dans le domaine du stockage de l'énergie électrique, à une conférence sur les espoirs et déconvenues des batteries au lithium: L'enjeu mondial des batteries au lithium par le professeur Michel ARMAND, Inventeur de la batterie lithium-polymère, Professeur et Directeur de recherches / CNRS à l'Université d'Amiens / Picardie Le lundi 26 mars 2007, à 19 heures, au CERN à la Salle du Conseil, bâtiment 503, 1er étage

  9. Stabilization of AuNPs by monofunctional triazole linked to ferrocene, ferricenium, or coumarin and applications to synthesis, sensing, and catalysis.

    Science.gov (United States)

    Li, Na; Zhao, Pengxiang; Igartua, María E; Rapakousiou, Amalia; Salmon, Lionel; Moya, Sergio; Ruiz, Jaime; Astruc, Didier

    2014-11-01

    Monofunctional triazoles linked to ferrocene, ferricenium, or coumarin (Cou), easily synthesized by copper-catalyzed azide alkyne (CuAAC) "click" reactions between the corresponding functional azides and (trimethylsilyl)acetylene followed by silyl group deprotection, provide a variety of convenient neutral ligands for the stabilization of functional gold nanoparticles (AuNPs) in polar organic solvents. These triazole (trz)-AuNPs are very useful toward a variety of applications to synthesis, sensing, and catalysis. Both ferrocenyl (Fc) and isostructural ferricenium linked triazoles give rise to AuNP stabilization, although by different synthetic routes. Indeed, the first direct synthesis and stabilization of AuNPs by ferricenium are obtained by the reduction of HAuCl4 upon reaction with a ferrocene derivative, AuNP stabilization resulting from a synergy between electrostatic and coordination effects. The ferricenium/ferrocene trz-AuNP redox couple is fully reversible, as shown by cyclic voltammograms that were recorded with both redox forms. These trz-AuNPs are stable for weeks in various polar solvents, but at the same time, the advantage of trz-AuNPs is the easy substitution of neutral trz ligands by thiols and other ligands, giving rise to applications. Indeed, this ligand substitution of trz at the AuNP surface yields a stable Fc-terminated nanogold-cored dendrimer upon reaction with a Fc-terminated thiol dendron, substitution of Cou-linked trz with cysteine, homocysteine, and glutathione provides remarkably efficient biothiol sensing, and a ferricenium-linked trz-AuNP catalyst is effective for NaBH4 reduction of 4-nitrophenol to 4-aminophenol. In this catalytic example, the additional electrostatic AuNP stabilization modulates the reaction rate and induction time. PMID:25363304

  10. Composition-selective fabrication of ordered intermetallic Au-Cu nanowires and their application to nano-size electrochemical glucose detection

    Science.gov (United States)

    Kim, Si-In; Eom, Gayoung; Kang, Mijeong; Kang, Taejoon; Lee, Hyoban; Hwang, Ahreum; Yang, Haesik; Kim, Bongsoo

    2015-06-01

    Bimetallic nanostructures can provide distinct and improved physicochemical properties by the coupling effect of the two metal components, making them promising materials for a variety of applications. Herein, we report composition-selective fabrication of ordered intermetallic Au-Cu nanowires (NWs) by two-step chemical vapor transport method and their application to nano-electrocatalytic glucose detection. Ordered intermetallic Au3Cu and AuCu3 NWs are topotaxially fabricated by supplying Cu-containing chemicals to pre-synthesized single-crystalline Au NW arrays. The composition of fabricated Au-Cu NWs can be selected by changing the concentration of Cu-containing species. Interestingly, Au3Cu NW electrodes show unique electrocatalytic activity for glucose oxidation, allowing us to detect glucose without interference from ascorbic acid. Such interference-free detection of glucose is attributed to the synergistic effect, induced by incorporation of Cu in Au. We anticipate that Au3Cu NWs could show possibility as efficient nano-size electrochemical glucose sensors and the present fabrication method can be employed to fabricate valuable ordered intermetallic nanostructures.

  11. Corrosion Protection of Al/Au/ZnO Anode for Hybrid Cell Application.

    Science.gov (United States)

    Slaughter, Gymama; Stevens, Brian

    2015-01-01

    Effective protection of power sources from corrosion is critical in the development of abiotic fuel cells, biofuel cells, hybrid cells and biobateries for implantable bioelectronics. Corrosion of these bioelectronic devices result in device inability to generate bioelectricity. In this paper Al/Au/ZnO was considered as a possible anodic substrate for the development of a hybrid cell. The protective abilities of corrosive resistant aluminum hydroxide and zinc phosphite composite films formed on the surface of Al/Au/ZnO anode in various electrolyte environments were examined by electrochemical methods. The presence of phosphate buffer and physiological saline (NaCl) buffer allows for the formation of aluminum hyrdroxide and zinc phosphite composite films on the surface of the Al/Au/ZnO anode that prevent further corrosion of the anode. The highly protective films formed on the Al/Au/ZnO anode during energy harvesting in a physiological saline environment resulted in 98.5% corrosion protective efficiency, thereby demonstrating that the formation of aluminum hydroxide and zinc phosphite composite films are effective in the prevention of anode corrosion during energy harvesting. A cell assembly consisting of the Al/Au/ZnO anode and platinum cathode resulted in an open circuit voltage of 1.03 V. A maximum power density of 955.3 mW/ cm² in physiological saline buffer at a cell voltage and current density of 345 mV and 2.89 mA/ cm², respectively. PMID:26580661

  12. Self-ordering of Au(111) vicinal surfaces and application to nanostructure organized growth

    International Nuclear Information System (INIS)

    This paper reports on Au(111) vicinal surfaces, either regularly stepped surfaces, reconstructed or not, or periodically faceted surfaces, which are well suited to be used as templates for organized growth of clusters. Angles of misorientation with respect to the (111) plane lie between 1 deg. and 12 deg. and two opposite azimuths are considered: (i) [21-bar1-bar], that leads to steps with (100) microfacets, and (ii) [2-bar11], that leads to steps with (111) microfacets. The behaviour of the Au(111) reconstruction in the vicinity of steps depends drastically on the step microstructure, and this is a key point for understanding the various periodic morphologies existing on Au(111) vicinal surfaces. The interaction between the reconstruction and the close-packed steps of the Au(111) surface is interpreted in terms of the relative stability of both types of step. Self-organized morphologies between 10 and 100 nm are interpreted within the framework of elastic theory and by pointing out the crucial role played by the atomic boundary energy term. The microscopic origin of faceting is discussed, proposing two different models depending on each azimuth. Then, we illustrate the use of Au(111) vicinal surfaces as templates for growing long range ordered nanostructures. Examples are given in the case of cobalt growth

  13. Production of radio-gold {sup 199}Au for diagnostic and therapeutic applications

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin, E-mail: mu-khandaker@um.edu.my; Kassim, Hasan Abu, E-mail: hasanak@um.edu.my [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu, E-mail: haba@riken.jp [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan)

    2016-01-22

    Production cross-sections of the {sup nat}Pt(d,x){sup 199}Au reactions have been measured from a 24-MeV deuteron energy down to the threshold by using a stacked-foil activation technique combined with HPGe γ-ray spectrometry. Only a partial agreement is obtained with the existing literature data. Theoretical data extracted from the TENDL-2013 library shows large discrepancy with the measured ones. Physical thick target yield for the {sup 199}Au radionuclide was deduced using the measured cross-sections, and found a general agreement with the directly measured yield available in the literature. This study reveals that a low deuteron energy (<15 MeV) cyclotron and an enriched {sup 198}Pt (100%) target could be used to obtain {sup 199}Au in no carrier added form.

  14. An application of Au thin-film emissivity barrier on Ni alloy

    Energy Technology Data Exchange (ETDEWEB)

    Huang Zhibin [State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechincial University, Xi' an 710072 (China)], E-mail: huangzhibin83@163.com; Zhu Dongmei; Lou Fa; Zhou Wancheng [State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechincial University, Xi' an 710072 (China)

    2008-12-30

    1000 nm-thick Au film was sputter-deposited on two groups of nickel alloy substrates, in which one group (Group A) was oxidated at 800 deg. C for 20 h to form a oxide film before coating gold while another group (Group B) was unoxidated. The gold thin-film is applied to serve as a low emissivity coating to reflect thermal radiation. The gold-coated samples were heated in air at 600 deg. C for 150 h to explore the effect of high-temperature environment on the emissivity of coated Au film. After heat-treatment, the average thermal emissivity at the wavelength of 3-14 {mu}m of Group B greatly increased from 0.18 to 0.82 while that of Group A only increased a little. The diffusion between Au and other nickel alloy elements at 600 deg. C also had been discussed in this paper.

  15. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Politecnica Univ. de Chiapas, Tuxtla Gutierrez, Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J. [Politecnica Univ. de Chiapas, Chiapas (Mexico). Energia y Sustentabilidad; Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Gamboa, S.A. [Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Pal, U. [Inst. de Fisica, Universidad Autonoma de Puebla Univ., Puebla (Mexico). Inst. de Fisica; Gonzalez, I. [Autonoma Metropolitana Univ. (Mexico). Dept. de Quimica

    2008-07-01

    This paper reported on a study in which membrane electrode assemblies (MEAs) were fabricated by depositing Au, Pt and AuPt nanoparticles on Nafion 115 membrane for use in a proton exchange membrane fuel cell (PEMFC). A Rotating Disc Electrode (RDE) was used to measure the nanoparticle catalyst activity. After deposition of the nanoparticles on the membrane, the surface was studied by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). The membrane proton conduction process was studied by Electrochemical Impedance Spectroscopy (EIS) with the 4 probe technique. The MEAs fabricated with Nafion/Metal membranes were evaluated in a PEMFC under standard conditions. Colloidal solutions were used to prepare self-assembled electrodes with nanoparticles deposited on Nafion membrane. The particles deposited on Nafion showed good stability and had homogeneous distribution along the membrane surface. The impedance results revealed an increase in the membrane proton resistance of the self-assembled electrodes compared to unmodified Nafion. The Au-Pt nanoparticles were obtained by chemical reduction. The nanoparticle size in the three systems was about 2 nm. The self-assembled electrodes performed well in standard conditions. The optimum colloidal concentration and immersion time must be determined in order to obtain good catalytic activity and high membrane conductance. The self-assembled Nafion/AuPt had the best open circuit potential (887 mV). The Au and Pt self-assemblies showed a similar performance in terms of maximum power and maximum current density. The performance of the Nafion/Au self-assembly was influenced more by ohmic losses, particularly in the membrane. The maximum power generation was obtained at 0.35 V. The mass transport losses increased after this value, thereby affecting the efficiency of the PEMFC. 2 figs.

  16. The Manche storage centre: Annual report 2010; Centre de stockage de la Manche Rapport annuel 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This report presents the installations of the CSM (Centre de Stockage de la Manche), the first French centre for the surface storage of low and intermediate level radioactive wastes. It briefly describes the site and its buildings, the multi-layer principle which is used to cover the wastes, how surface and drainage waters are managed, which controls are performed. It presents the different nuclear safety measures: principles, prevention measures, technical measures to meet the requirements, the legal plan for the control of the Centre and its environment, the quality management organization. It presents the measures regarding radioprotection and safety, indicates incidents and accidents which occurred in 2010, gives information and data on release management (effluents, controls, obtained data on surface and underground waters in different points). It briefly comments how the Centre's wastes are managed, evokes the case of other pollutions, and indicates actions performed in terms of public information

  17. Siting, design, and construction of Centre De Stockage De L'Aube

    International Nuclear Information System (INIS)

    Long-term industrial management of radioactive waste in France is carried out by the Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA). ANDRA is in charge with design, siting, construction and operation of disposal centers. The solution selected in France for the disposal of low- and medium-level, short-lived radioactive waste is near-surface disposal in the earth using the principle of multiple barriers, in accordance with national safety rule and regulations, and based on operating experience from the Centre de Stockage de la Manche. Since the Center's start-up in 1969, 350,000 m3 of waste have been disposed of. The French national program for waste management is running on with the construction of a second near surface disposal which is expected in operation in 1991

  18. Quand l'eau n'est plus un don du ciel: un MEGC appliqué au Maroc

    OpenAIRE

    Decaluwe, Bernard; Patry, André; Savard, Luc

    1997-01-01

    L'eau est devenue une ressource naturelle précieuse dans la plupart des régions du monde. Avec une croissance phénoménale de la demande, les gouvernements des pays au prise avec cette rareté nouvelle ont tenté d'y faire face en augmentant la capacité de stockage de l'or blanc. Depuis le début de cette décennie, ces gouvernements semblent changer de cap en s'orientant vers une meilleure gestion de la demande afin de rationaliser l'utilisation de la ressource. Cependant, une augmentation drasti...

  19. Dynamics of Green AuNP Formation and Their Application in Core-Shell Nanostructures

    DEFF Research Database (Denmark)

    Engelbrekt, Christian; Zhang, Jingdong; Jensen, Palle Skovhus;

    potential, conductivity, pH, turbidity, UV - Vis extinction , core size and hydrodynamic diameter . The synthesized AuNPs have been employed as core particles in advanced core - shell structures with highly porous platinum nanoparticle coating or copper oxide shells. These hold poten- tials as effective...... catalysts in fuel cells and methanol reformers....

  20. Application of Au/TiO2–WO3 material in visible light photoreductive ozone sensors

    International Nuclear Information System (INIS)

    Various ratios of TiO2–WO3 and Au/TiO2–WO3 composites were prepared as ozone-sensing materials. These materials were characterized by temperature-programmed reduction, UV–visible reflective spectra, transmission electron microscopy, and X-ray diffraction. A 460-nm blue LED light source was used for the detection of gaseous ozone, and the sensing properties of various ratios of TiO2–WO3 were measured. Among the various weight ratios of TiO2–WO3, the sensor response of the TiO2–WO3 (3:1) was the highest obtained response (23.8) to 2.5 ppm ozone. By adding 0.1 wt.% Au to the TiO2–WO3 (3:1), the sensor response was improved to 64.0. The ozone-sensing properties are attributed to the mechanism of adsorption, photoreduction, desorption, and the surface reaction processes of ozone. - Highlights: • Visible light LED as photo-reductive light source • Application of Au/TiO2–WO3 material for gaseous ozone sensor • High sensor response of 64.0 to 2.5 ppm ozone

  1. Optical and structural properties of Au-Ag islands films for plasmonic applications

    Energy Technology Data Exchange (ETDEWEB)

    Sancho-Parramon, J.; Janicki, V.; Loncaric, M.; Zorc, H.; Dubcek, P. [Ruder Boskovic Institute, Zagreb (Croatia); Bernstorff, S. [Sincrotrone Trieste, Basovizza Trieste (Italy)

    2011-06-15

    Bimetallic islands films consisting of composite Au-Ag nanoparticles are deposited on glass substrates by electron beam evaporation. Broad tuning of the surface-plasmon resonance (SPR) characteristics can be achieved by controlling film composition, deposition temperature and post-deposition thermal annealing. Optical and structural characterization of the samples enable one to establish the link between the SPR and the morphological and compositional characteristics of nanoparticles. (orig.)

  2. Dynamics of Green AuNP Formation and Their Application in Core-Shell Nanostructures

    OpenAIRE

    Engelbrekt, Christian; Zhang, Jingdong; Jensen, Palle Skovhus; Ulstrup, Jens

    2011-01-01

    The formation of gold nanoparticles in our optimized synthesis is achieved through reduction of tetrachloroauric acid in 2 - (N - morpholino)ethanesulphonic acid (MES) buffered glucose and stabilization by starch at room temperature. The formation has been followed by measuring the electrochemical potential, conductivity, pH, turbidity, UV - Vis extinction , core size and hydrodynamic diameter . The synthesized AuNPs have been employed as core particles in advanced core - shell structures wit...

  3. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Univ. Politecnica de Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J.; Gamboa, S.A.; Joseph, S. [Univ. Nacional Autonoma de Mexico, Morelos (Mexico). Centrode Investigacion en Energia; Pal, U. [Univ. Autonoma de Puebla, Pue (Mexico). Inst. de Fisica; Gonzalez, I. [Univ. Autonoma Metropolitana, Mexico City (Mexico). Dept. de Quimica

    2010-07-01

    This paper described the synthesis and characterization of gold (Au), platinum (Pt) and Au-Pt nanoparticles impregnated on a Nafion membrane in a proton exchange membrane fuel cell (PEMFC). The aim of the study was to fabricate the membrane electrode assembly (MEA) by depositing the nanoparticles on the membrane using an immersion technique. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to study the deposition process. Electrochemical impedance spectroscopy (EIS) was used to study the membrane proton conduction process. An elemental mapping analysis was performed in order to study the location of the Au and Pt in the self-assemblies. Results of the study showed that the particles deposited on the Nafion had good stability and a homogenous distribution along the membrane surface. The particles showed a direct relation in size and location with the hydrophilic and hydrophobic distribution phases of the membrane. The main membrane resistance was located between the membrane and the electrolyte. The self-assembled electrodes demonstrated a good performance at standard conditions. 33 refs., 4 tabs., 11 figs.

  4. Suivi des métaux et métalloïdes dans les effluents de centres de stockage de déchets : Spéciation et devenir des composés de l'arsenic et de l'étain dans les lixiviats et les biogaz

    OpenAIRE

    Pinel-Raffaitin, Pauline

    2006-01-01

    Les centres de stockage de déchets (CSD) ménagers et assimilés constituent encore une filière de gestion très répandue Ce sont de véritables « boites noires » dans lesquelles des phénomènes physiques, chimiques et biologiques interviennent simultanément. Deux effluents sont produits au cours de la dégradation des déchets : les lixiviats et les biogaz. Même si le contact entre les effluents et le système environnant est limité, leur suivi est nécessaire pour améliorer leur traitement et préven...

  5. Electrogenerated Chemiluminescence Behavior of Au nanoparticles-hybridized Pb (II) metal-organic framework and its application in selective sensing hexavalent chromium.

    Science.gov (United States)

    Ma, Hongmin; Li, Xiaojian; Yan, Tao; Li, Yan; Liu, Haiyang; Zhang, Yong; Wu, Dan; Du, Bin; Wei, Qin

    2016-01-01

    In this work, a novel electrochemiluminescence (ECL) sensor based on Au nanoparticles-hybridized Pb (II)-β-cyclodextrin (Pb-β-CD) metal-organic framework for detecting hexavalent chromium (Cr(VI)) was developed. Pb-β-CD shows excellent ECL behavior and unexpected reducing ability towards Au ions. Au nanoparticles could massively form on the surface of Pb-β-CD (Au@Pb-β-CD) without use of any additional reducing agent. In the presence of coreactant K2S2O8, the ECL emission of Pb-β-CD was enhanced by the formation of Au nanoparticles. Cr(VI) can collisionally quench the ECL behavior of Au@Pb-β-CD/S2O8(2-) system and the detection mechanism was investigated. This ECL sensor is found to have a linear response in the range of 0.01-100 μM and a low detection limit of 3.43 nM (S/N = 3) under the optimal conditions. These results suggest that metal-organic framework Au@Pb-β-CD has great potential in extending the application in the ECL field as an efficient luminophore. PMID:26902375

  6. Electrogenerated Chemiluminescence Behavior of Au nanoparticles-hybridized Pb (II) metal-organic framework and its application in selective sensing hexavalent chromium

    Science.gov (United States)

    Ma, Hongmin; Li, Xiaojian; Yan, Tao; Li, Yan; Liu, Haiyang; Zhang, Yong; Wu, Dan; Du, Bin; Wei, Qin

    2016-01-01

    In this work, a novel electrochemiluminescence (ECL) sensor based on Au nanoparticles-hybridized Pb (II)-β-cyclodextrin (Pb-β-CD) metal-organic framework for detecting hexavalent chromium (Cr(VI)) was developed. Pb-β-CD shows excellent ECL behavior and unexpected reducing ability towards Au ions. Au nanoparticles could massively form on the surface of Pb-β-CD (Au@Pb-β-CD) without use of any additional reducing agent. In the presence of coreactant K2S2O8, the ECL emission of Pb-β-CD was enhanced by the formation of Au nanoparticles. Cr(VI) can collisionally quench the ECL behavior of Au@Pb-β-CD/S2O82− system and the detection mechanism was investigated. This ECL sensor is found to have a linear response in the range of 0.01–100 μM and a low detection limit of 3.43 nM (S/N = 3) under the optimal conditions. These results suggest that metal-organic framework Au@Pb-β-CD has great potential in extending the application in the ECL field as an efficient luminophore. PMID:26902375

  7. Study of the nucleation and growth of antibiotic labeled Au NPs and blue luminescent Au8 quantum clusters for Hg2+ ion sensing, cellular imaging and antibacterial applications

    Science.gov (United States)

    Khandelwal, Puneet; Singh, Dheeraj K.; Sadhu, Subha; Poddar, Pankaj

    2015-11-01

    Herein, we report a detailed experimental study supported by DFT calculations to understand the mechanism behind the synthesis of cefradine (CFD - an antibiotic) labeled gold nanoparticles (Au NPs) by employing CFD as both a mild reducing and capping agent. The analysis of the effect of growth conditions reveals that a higher concentration of HAuCl4 results in the formation of an increasing fraction of anisotropic structures, higher temperature leads to the formation of quasi-spherical particles instead of anisotropic ones, and larger pH leads to the formation of much smaller particles. The cyclic voltammetry (CV) results show that when the pH of the reaction medium increases from 4 to 6, the reduction potential of CFD increases which leads to the synthesis of nanoparticles (in a pH 4 reaction) to quantum clusters (in a pH 6 reaction). The MALDI-TOF mass spectrometry results of supernatant of the pH 6 reaction indicate the formation of [Au8(CFD)2S6] QCs which show fluorescence at ca. 432 nm with a Stokes shift of ca. 95 nm. The blue luminescence from Au8 QCs was applied for sensing of Hg2+ ions on the basis of an aggregation-induced fluorescence quenching mechanism and offers good selectivity and a high sensitivity with a limit of detection ca. 2 nM which is lower than the detection requirement of 10 nM by the U.S. EPA and 30 nM by WHO for drinking water. We have also applied the sensing probe to detect Hg2+ ions in bacterial samples. Further, we have investigated the antibacterial property of as-synthesized Au NPs using MIC, growth curve and cell survival assay. The results show that Au NPs could reduce the cell survival very efficiently rather than the cell growth in comparison to the antibiotic itself. The scanning electron microscopy study shows the degradation and blebbing of the bacterial cell wall upon exposure with Au NPs which was further supported by fluorescence microscopy results. These Au NPs did not show reactive oxygen species generation. We believe

  8. Apport de la géostatistique à la description des stockages de gaz en aquifère Contribution of Geostatistics to Describing Aquifer Gas-Storage Reservoirs

    Directory of Open Access Journals (Sweden)

    Delhomme J. P.

    2006-11-01

    Full Text Available L'étude du comportement d'un réservoir de gaz en nappe aquifère réclame une connaissance aussi précise que possible des caractéristiques géométriques et pétrophysiques des couches réservoirs. Les moyens d'investigation sont de deux natures : - forages permettant une connaissance locale des roches réservoirs ; - mesures sismiques conduisant à une estimation approximative des cotes de certains repères stratigraphiques, en des points situés le long de profils. Les données recueillies sont donc, par nature, fragmentaires et discrètes : là où elles sont absentes, il y a lieu d'estimer les grandeurs étudiées en tenant compte au mieux de notre connaissance de leur variabilité spatiale. Ce problème d'interpolation optimale a donné lieu, depuis une vingtaine d'années, à l'élaboration et la mise en pratique d'un outil théorique particulièrement bien adapté aux besoins exprimés par les techniciens des sciences de la terre : la théorie des variables régionalisées due à G. Matheron. Des programmes informatiques mettant en oeuvre cette théorie sont actuellement opérationnels. Des exemples d'application en sont donnés : - tracé automatique de cartes structurales à partir des données de forages et des mesures sismiques ; - estimation des incertitudes de prévision sur les profondeurs ; - tracé de plusieurs variantes de carte compatibles avec les données ; - établissement d'éléments statistiques relatifs à une grandeur caractéristique d'un stockage : volume stockable par exemple ; - génération automatique des données nécessaires à la mise en oeuvre d'un modèle maillé de réservoir. Predicting and monitoring the behavior of an aquifer gas-storage reservoir requires as precise a knowledge as possible of the geometric and petrophysical properties of the reservoir layer. Two ways of obtaining this information can be given: (a Boreholes which provide local knowledge of the reservoir, and (b Seismic measurements

  9. Optical properties of random alloys: application to CuAu and NiPt

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Kamal Krishna; Mookerjee, Abhijit [S N Bose National Centre for Basic Sciences, Block-JD, Sector-III, Salt Lake City, Kolkata-700098 (India)

    2005-07-20

    In an earlier paper we presented a formulation for the calculation of the configuration-averaged optical conductivity in random alloys. Our formulation is based on the augmented-space theorem introduced by one of us (Mookerjee 1973 J. Phys. C: Solid State Phys. 6 1340). In this communication we shall combine the augmented space methodology with the tight-binding linear muffin-tin orbital technique (TB-LMTO) to study the optical conductivities of two alloys, CuAu and NiPt.

  10. Synthesis and SERS application of SiO2@Au nanoparticles

    OpenAIRE

    Saini, Apurve; Maurer, Thomas; Lorenzo, Irene Izquierdo; Santos, Andre Ribeiro; Beal, Jérémie; Goffard, Julie; Gérard, Davy; Vial, Alexandre; Plain, Jérôme

    2014-01-01

    In this letter, we report a chemical route for synthesizing SiO2@Au core-shell nanoparticles. The process includes four steps: i) preparation of the silica cores, ii) grafting gold nanoparticles over SiO2 cores, iii) priming of the silica-coated gold nanoparticles with 2 and 10 nm gold colloids and finally iv) formation of complete shell. The optical extinction spectra were experimentally measured and compared to numerical calculations in order to confirm the dimensions deduced from SEM image...

  11. Highly narrow nanogap-containing Au@Au core-shell SERS nanoparticles: size-dependent Raman enhancement and applications in cancer cell imaging

    Science.gov (United States)

    Hu, Chongya; Shen, Jianlei; Yan, Juan; Zhong, Jian; Qin, Weiwei; Liu, Rui; Aldalbahi, Ali; Zuo, Xiaolei; Song, Shiping; Fan, Chunhai; He, Dannong

    2016-01-01

    Cellular imaging technologies employing metallic surface-enhanced Raman scattering (SERS) tags have gained much interest toward clinical diagnostics, but they are still suffering from poor controlled distribution of hot spots and reproducibility of SERS signals. Here, we report the fabrication and characterization of high narrow nanogap-containing Au@Au core-shell SERS nanoparticles (GCNPs) for the identification and imaging of proteins overexpressed on the surface of cancer cells. First, plasmonic nanostructures are made of gold nanoparticles (~15 nm) coated with gold shells, between which a highly narrow and uniform nanogap (~1.1 nm) is formed owing to polyA anchored on the Au cores. The well controlled distribution of Raman reporter molecules, such as 4,4'-dipyridyl (44DP) and 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB), are readily encoded in the nanogap and can generate strong, reproducible SERS signals. In addition, we have investigated the size-dependent SERS activity of GCNPs and found that with the same laser wavelength, the Raman enhancement discriminated between particle sizes. The maximum Raman enhancement was achieved at a certain threshold of particle size (~76 nm). High narrow nanogap-containing Au@Au core-shell SERS tags (GCTs) were prepared via the functionalization of hyaluronic acid (HA) on GCNPs, which recognized the CD44 receptor, a tumor-associated surface biomarker. And it was shown that GCTs have a good targeting ability to tumour cells and promising prospects for multiplex biomarker detection.Cellular imaging technologies employing metallic surface-enhanced Raman scattering (SERS) tags have gained much interest toward clinical diagnostics, but they are still suffering from poor controlled distribution of hot spots and reproducibility of SERS signals. Here, we report the fabrication and characterization of high narrow nanogap-containing Au@Au core-shell SERS nanoparticles (GCNPs) for the identification and imaging of proteins overexpressed on

  12. Désulfuration sélective du gaz soutiré d'un stockage souterrain Selective Desulfurization of Gas Withdrawn from an Underground Storage Facility

    Directory of Open Access Journals (Sweden)

    Jaubertou G.

    2006-11-01

    Full Text Available La présence d'H2S constatée dès les premiers soutirages de gaz au stockage souterrain en nappe aquifère de Chémery avait nécessité la mise en place d'unités de désulfuration. Le gaz injecté étant exempt de gaz carbonique, le procédé par voie liquide utilisant la monoéthanolamine avait été retenu. Depuis 1977, le gaz injecté contenant des quantités appréciables de gaz carbonique a rendu inutilisable ce procédé. Parallèlement à l'injection de ce composé acide, la production d'H2S a fortement augmenté. La mise en oeuvre d'une amine sélective (MDEA a permis d'éliminer les composés soufrés en laissant pratiquement inchangée la composition du gaz chargé en C02. Les installations existantes ont pu être conservées, la banalisation des circuits facilitant l'utilisation de cette nouvelle amine. La communication présente les études et essais réalisés ainsi que les résultats d'exploitation qui se sont révélés particulièrement intéressants tant au point de vue technique qu'économique The presence of H2S in the first gas withdrawn from the underground storage aquifer at Chémery, France, required the installation of desulfurization units. Since there was no carton dioxide in the injected gas, a liquid process using monoethanolamine was selected. This process has become unusable since 1977 because the injected gas contains appreciable amounts of carton dioxide. At the same time as the injection of this acid compound, the production of H2S has considerably increased. A selective amine (MDEA was used tg eliminate the sulfur-containing compounds while leaving the composition of the C02-containing gas almost unchanged. The existing installations have been maintained as the result of the standardizing of the circuits for this new amine. This article describes the research and tests performed as well as the operational results which have turned out to be particularly intersting from both the technical and economic stand

  13. Numerical modeling of damage and permeability interaction in rocks. Application for the radioactive waste storage in deep galleries; Modelisation numerique du couplage entre l'endommagement et la permeabilite des roches. Application a l'etude des ouvrages de stockage souterrain

    Energy Technology Data Exchange (ETDEWEB)

    Maleki, K

    2004-03-15

    The relation between damage and permeability in rocks is a very important subject in industrial applications. It is for example the case of cracks around the radioactive waste storage galleries (EDZ) which can rise considerably the permeability and so make a serious problem for the sealing and the safety of these structures. The same phenomena can occur in the surrounding concrete wall of the nuclear power stations and also in the cracking of the oil-bearing rocks reservoirs. The experimental research on this subject, specially in laboratory G.3S-LMS in Ecole Polytechnique made it possible to determine the orders of damage effect on the permeability change. But a numerical modeling of these phenomena for setting a constitutive behavior law was to be done. This is the principal objective of this thesis. In this project, at first the notion of crack damage is defined. This type of damage is modeled by the disc shaped crack distribution in the 3D space. The disc's geometrical characteristics (radius, direction and opening) obey the statistical distribution laws, depending on the type of loading (compression or extension). The upper and lower limits of the characteristics are fixed according to actual observations, carried out on clay-stone (host rock selected for the realization of an underground research laboratory in Bure). In order to modeling the damage in the porous media, the double porosity concept is considered. A method of homogenization is used to simulate the flow through the network of cracks and porosity. It allows to derive the equivalent permeability of the fractured porous media. The study of the correlations between permeability and damage, obtained by this method for various values of fracture density, made it possible to obtain a relation between permeability and crack damage, for classical types of loading as simple extension and simple compression. To generalize this relation in the case of any specified triaxial loading, the crack damage is

  14. Crystallographic investigation of Au nanoparticles embedded in a SrTiO{sub 3} thin film for plasmonics applications by means of synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Pincini, Davide, E-mail: davide.pincini@mail.polimi.it [European Synchrotron Radiation Facility, CS 40220, 71, avenue des Martyrs, F-38043 Grenoble Cedex 9 (France); Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Mazzoli, Claudio [Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Bernhardt, Hendrik; Katzer, Christian; Schmidl, Frank [Institut für Festkörperphysik, Friedrich-Schiller-Universität Jena, Helmholtzweg 5, 07743 Jena (Germany); Uschmann, Ingo [Institut für Optik und Quantenelektronik, Friedrich-Schiller-Universität Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Detlefs, Carsten [European Synchrotron Radiation Facility, CS 40220, 71, avenue des Martyrs, F-38043 Grenoble Cedex 9 (France)

    2015-03-14

    Self-organized monocrystalline Au nanoparticles with potential applications in plasmonics are grown in a SrTiO{sub 3} matrix by a novel two-step deposition process. The crystalline preferred orientation of these Au nanoparticles is investigated by synchrotron hard x-ray diffraction. Nanoparticles preferentially align with the (111) direction along the substrate normal (001), whereas two in-plane orientations are found with [110]{sub SrTiO{sub 3}}∥[110]{sub Au} and [100]{sub SrTiO{sub 3}}∥[110]{sub Au}. Additionally, a smaller diffraction signal from nanoparticles with the (001) direction parallel to the substrate normal (001) is observed; once again, two in-plane orientations are found, with [100]{sub SrTiO{sub 3}}∥[100]{sub Au} and [100]{sub SrTiO{sub 3}}∥[110]{sub Au}. The populations of the two in-plane orientations are found to depend on the thickness of the gold film deposited in the first step of the growth.

  15. Novel electrochemical redox-active species: one-step synthesis of polyaniline derivative-Au/Pd and its application for multiplexed immunoassay

    Science.gov (United States)

    Wang, Liyuan; Feng, Feng; Ma, Zhanfang

    2015-11-01

    Electrochemical redox-active species play crucial role in electrochemically multiplexed immunoassays. A one-pot method for synthesizing four kinds of new electrochemical redox-active species was reported using HAuCl4 and Na2PdCl4 as dual oxidating agents and aniline derivatives as monomers. The synthesized polyaniline derivative-Au/Pd composites, namely poly(N-methyl-o-benzenediamine)-Au/Pd, poly(N-phenyl-o-phenylenediamine)-Au/Pd, poly(N-phenyl-p-phenylenediamine)-Au/Pd and poly(3,3’,5,5’-tetramethylbenzidine)-Au/Pd, exhibited electrochemical redox activity at -0.65 V, -0.3 V, 0.12 V, and 0.5 V, respectively. Meanwhile, these composites showed high H2O2 electrocatalytic activity because of the presence of Au/Pd. The as-prepared composites were used as electrochemical immunoprobes in simultaneous detection of four tumor biomarkers (carcinoembryonic antigen (CEA), carbohydrate antigen 19-9 (CA199), carbohydrate antigen 72-4 (CA724), and alpha fetoprotein (AFP)). This immunoassay shed light on potential applications in simultaneous gastric cancer (related biomarkers: CEA, CA199, CA724) and liver cancer diagnosis (related biomarkers: CEA, CA199, AFP). The present strategy to the synthesize redox species could be easily extended to other polymers such as polypyrrole derivatives and polythiophene derivatives. This would be of great significance in the electrochemical detection of more analytes.

  16. ÉTUDE DU TRAITEMENT DES SILOXANES PAR ADSORPTION SUR MATÉRIAUX POREUX : APPLICATION AU TRAITEMENT DES BIOGAZ

    OpenAIRE

    Ricaurte Ortega, Deyanira

    2009-01-01

    Étude du traitement des siloxanes par adsorption sur matériaux poreux : application au traitement des biogaz Les biogaz sont des mélanges à forte teneur en méthane utilisés dans la production de chaleur ou d'électricité. Ils contiennent des quantités plus ou moins importantes de siloxanes qui sont interdits pour de nombreuses utilisations du biogaz. La possibilité d'élimination des siloxanes par adsorption est étudiée. Une étude en réacteurs statiques permet d'évaluer les capacités d'adsorpti...

  17. Utilisation rationnelle de l'énergie par les techniques de stockage et de transport du froid par chaleur latente

    OpenAIRE

    Bédécarrats, Jean-Pierre

    2010-01-01

    Les contraintes environnementales de plus en plus fortes ainsi que les problèmes grandissants de la disponibilité des ressources énergétiques obligent le secteur de l'énergie non seulement à une évolution importante de ses technologies mais aussi à leurs utilisations plus rationnelles. Ce mémoire présente la synthèse de mes initiatives de recherches menées sur le stockage et le transport de l'énergie par chaleur latente essentiellement dans le domaine du froid. Les Matériaux à Changement de P...

  18. Review of the application of isotopic studies to the genesis of Cu-Au mineralisation at Olympic Dam and Au mineralisation at Porgera, the Tennant Creek district and Yilgarn Craton

    International Nuclear Information System (INIS)

    This paper reviews the application of radiogenic isotopes to the study of four Cu-U and Au deposits or deposit types in the Australasian region: Olympic Dam, Porgera, the Proterozoic Au deposits of the Tennant Creek district and the Archaean gold deposits of the Yilgarn Craton. In each case it has been possible to date the mineralisation and to correlate ore formation with a specific igneous event or stage in crystal evolution. In three cases it was also possible to use radiogenic isotopes to trace the source of the metal(s) or to constrain the fluid pathway. The results of K-Ar , 39Ar/40Ar dating of hydrothermal minerals associated with gold deposits, SHRIMP U-Pb analyses of zircon, and conventional Sr, Nd and Pb isotopic tracing of the ore fluids are reported to illustrate the power of radiogenic isotopes in ore-genesis studies

  19. Computer simulation study of in-zeolites templated carbon replicas: structural and adsorption properties for hydrogen storage application; simulation numerique de repliques de zeolithes en carbone: structures et proprietes d'adsorption en vue d'une application au stockage d'hydrogene

    Energy Technology Data Exchange (ETDEWEB)

    Roussel, T

    2007-05-15

    Hydrogen storage is the key issue to envisage this gas for instance as an energy vector in the field of transportation. Porous carbons are materials that are considered as possible candidates. We have studied well-controlled microporous carbon nano-structures, carbonaceous replicas of meso-porous ordered silica materials and zeolites. We realized numerically (using Grand Canonical Monte Carlo Simulations, GCMC) the atomic nano-structures of the carbon replication of four zeolites: AlPO{sub 4}-5, silicalite-1, and Faujasite (FAU and EMT). The faujasite replicas allow nano-casting of a new form of carbon crystalline solid made of tetrahedrally or hexagonally interconnected single wall nano-tubes. The pore size networks are nano-metric giving these materials optimized hydrogen molecular storage capacities (for pure carbon phases). However, we demonstrate that these new carbon forms are not interesting for room temperature efficient storage compared to the void space of a classical gas cylinder. We showed that doping with an alkaline element, such as lithium, one could store the same quantities at 350 bar compared to a classical tank at 700 bar. This result is a possible route to achieve interesting performances for on-board docking systems for instance. (author)

  20. CO{sub 2} solubility in brines of sedimentary basins. Application to CO{sub 2} sequestration (greenhouse gas); Solubilite de CO{sub 2} dans les saumures des bassins sedimentaires. Application au stockage de CO{sub 2} (gaz a effet de serre)

    Energy Technology Data Exchange (ETDEWEB)

    Portier, S.

    2005-04-01

    Large scale combustion of fossil energy leads today to a production of 20 billions tons of CO{sub 2} annually. This increases continuously the CO{sub 2} concentration in the atmosphere, responsible of the observed climatic increase of the temperature since one century. One of the most acceptable solutions consists in the so called CO{sub 2} sequestration in natural geological formations. The control of the process and the prediction of the final quantity of CO{sub 2} trapped in the deep saline aquifers depend on the knowledge of the solubility of acid gas in natural brines in the in situ temperature and pressure conditions. The possible dissolution of acid gases in aqueous phases brings a new complexity, owing to the fact that they behave like electrolytes in aqueous mediums A thermodynamic model for CO{sub 2} solubility is presented. The vapour phase is described by a cubic state equation. The aqueous phase is described by apparent constants of CO{sub 2} dissolution and dissociation, adjusted on literature data. This model is validated by measurements of the British Geological Survey (CO{sub 2} sequestration at Sleipner oil field, North Sea). The results of this study made it possible to calculate the impact of a CO{sub 2} injection on the solubility of calcite by acidification of formation water. The consequences in terms of CO{sub 2} storage capacity of deep saline aquifers are estimated. (author)

  1. Influence of geochemical processes on transport in porous medium; application to the clogging of confinement barriers in a geological waste disposal; Influence des processus geochimiques sur le transport en milieu poreux; application au colmatage en barrieres de confinement potentielles dans un stockage en formation geologique

    Energy Technology Data Exchange (ETDEWEB)

    Lagneau, V

    2002-07-01

    Three research orientations are currently followed for the future of radioactive wastes. Disposal in deep geological formations is one of these options. The package and the successive barriers are attacked by the in-situ water and start interacting. These reactions lead to modifications of the mineralogical composition of the materials and of their macroscopic properties. While the coupling between transport and geochemistry is widely studied, the feedback of porosity changes is usually neglected. Yet, studying different possible interfaces of a repository reveals that large modifications of porosity are likely to occur. This work, performed at the Ecole des Mines de Paris and Commissariat a l'Energie Atomique, aimed at investigating the effective consequences of taking porosity changes into account in coupled geochemistry-transport models. A simplified theoretic problem was addressed. It highlighted the difficulties of introducing porosity changes. In particular, it pointed out the effect of the several macroscopic relations binding porosity to transport and chemistry. Separately, two series of experiments, on very simple geochemical systems, gave concrete information on clogging systems. Following these results, porosity changes and their feedback on chemistry and transport were inserted in the coupled code HYTEC at the Ecole des Mines de Paris. Complex issues, related to the engineered barrier, were then addressed (concrete-clay interaction). New effects were found, including a decrease in the flux of dissolved species, due to the partial clogging at the interface, a slow down of reacting fronts; some reactions were even found to change directions. (author)

  2. A highly sensitive pressure sensor using a Au-patterned polydimethylsiloxane membrane for biosensing applications

    International Nuclear Information System (INIS)

    We report on the fabrication and characterization of a highly sensitive pressure sensor using a Au film patterned on a polydimethylsiloxane (PDMS) membrane. The strain-induced change in the film resistance was utilized to perform the quantitative measurement of absolute pressure. The highest sensitivity obtained for a 200 µm thick PDMS film sensor was 0.23/KPa with a range of 50 mm Hg, which is the best result reported so far, over that range, for any pressure sensor on a flexible membrane. The noise-limited pressure resolution was found to be 0.9 Pa (0.007 mm Hg), and a response time of ∼200 ms, are the best reported results for these sensors. The ultrahigh sensitivity is attributed to the strain-induced formation of microcracks, the effect of which on the resistance change was found to be highly reversible within a certain pressure range. A physical model correlating the sensitivity with the sensor parameters and crack geometry has been proposed. (paper)

  3. Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong, Stable, and Tunable Surface Plasmon Resonances

    KAUST Repository

    Huang, Jianfeng

    2015-08-13

    Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field-enhanced spectroscopies, plasmon-mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core–shell structured bimetallic nanorods (AuNR@AuAg) have well-mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag-coated Au NRs (AuNR@Ag) and Au-coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface-enhanced Raman spectroscopy that are some 30-fold higher than that of AuNR@Au. When incubated with a H2O2 solution (0.5 m), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620–690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.

  4. Molecular beam epitaxy of GaAs nanowires and their sustainability for optoelectronic applications. Comparing Au- and self-assisted growth methods

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, Steffen

    2011-09-28

    In this work the synthesis of GaAs nanowires by molecular beam epitaxy (MBE) using the vapour-liquid-solid (VLS) mechanism is investigated. A comparison between Au- and self-assisted VLS growth is at the centre of this thesis. While the Au-assisted method is established as a versatile tool for nanowire growth, the recently developed self-assisted variation results from the exchange of Au by Ga droplets and thus eliminates any possibility of Au incorporation. By both methods, we achieve nanowires with epitaxial alignment to the Si(111) substrates. Caused by differences during nanowire nucleation, a parasitic planar layer grows between the nanowires by the Au-assisted method, but can be avoided by the self-assisted method. Au-assisted nanowires grow predominantly in the metastable wurtzite crystal structure, while their self-assisted counterparts have the zincblende structure. All GaAs nanowires are fully relaxed and the strain arising from the lattice mismatch between GaAs and Si of 4.1 % is accommodated by misfit dislocations at the interface. Self-assisted GaAs nanowires are generally found to have vertical and non-polar side facets, while tilted and polar nanofacets were described for Au-assisted GaAs nanowires. We employ VLS nucleation theory to understand the effect of the droplet material on the lateral facets. Optoelectronic applications require long minority carrier lifetimes at room temperature. We fabricate GaAs/(Al,Ga)As core-shell nanowires and analyse them by transient photoluminescence (PL) spectroscopy. The results are 2.5 ns for the self-assisted nanowires as well as 9 ps for the Au-assisted nanowires. By temperature-dependent PL measurements we find a characteristic activation energy of 77 meV that is present only in the Au-assisted nanowires. We conclude that most likely Au is incorporated from the droplets into the GaAs nanowires and acts as a deep, non-radiative recombination centre.

  5. A Fabrication Route for Arrays of Ultra-low-Noise MoAu Transition Edge Sensors on Thin Silicon Nitride for Space Applications

    OpenAIRE

    Glowacka, D. M.; Crane, M.; Goldie, D. J.; Withington, S.

    2014-01-01

    We describe a process route to fabricate arrays of Ultra-low-Noise MoAu Transition Edge Sensors (TESs). The low thermal conductance required for space applications is achieved using 200 nm-thick Silicon Nitride (SiNx ) patterned to form long-thin legs with widths of 2.1 {\\mu}m. Using bilayers formed on SiNx islands from films with 40 nm-thick Mo and Au thicknesses in the range 30 to 280 nm deposited by dc-sputtering in ultra-high vacuum we can obtain tunable transition temperatures in the ran...

  6. Application of {sup 198}Au grains for carcinoma of oral cavity

    Energy Technology Data Exchange (ETDEWEB)

    Shimizutani, K. [Dept. of Oral Radiology, Osaka Dental University, Osaka (Japan); Koseki, Y. [Dept. of Oral Radiology, Osaka Dental University, Osaka (Japan); Inoue, To. [Dept. of Radiation Oncology, Biomedical Research Center, Osaka University Medical School, Osaka (Japan); Teshima, T. [Dept. of Radiology, Osaka University Medical School, Osaka (Japan); Furukawa, S. [Dept. of Oral and Maxillofacial Radiology, Osaka University, Faculty of Dentistry, Osaka (Japan); Kubo, K. [Dept. of Oral and Maxillofacial Radiology, Osaka University, Faculty of Dentistry, Osaka (Japan); Fachihata, H. [Dept. of Oral and Maxillofacial Radiology, Osaka University, Faculty of Dentistry, Osaka (Japan); Masaki, N. [Dept. of Therapeutic Radiology, Center for Adult Diseases, Osaka (Japan); Ikeda, H. [Dept. of Radiation Oncology, National Cancer Center Hospital, Tokyo (Japan); Tanaka, Y. [Dept. of Dentistry, Kobe Municipal Chuo Hospital, Kobe (Japan)

    1995-01-01

    The purpose of this study is to analyze the results of the treatment using gold grain implants over the past 9 years and to evaluate the usefulness of this treatment method. From January 1985 through April 1993, a total of 45 patients with squamous cell carcinomas of the oral cavity and the oropharynx were treated with {sup 198}Au grain (gold grain) at the Department of Radiology, Osaka University Medical School. The initial activity of the grains supplied weekly by the Japan Radioisotope Association was usually 5 mCi (185 MBq), and single implants were usual. In case of combined external irradiation, telecobalt {gamma}-rays or 4 MV X-rays were used for treatment before implant. The local control rate for patients with T1 stages was 80% (20/25) and with T2 stages, 59% (10/17). The local control rate was 71% (10/14) for gold grain alone and 72% (13/18) for external irradiation combined with gold grain implants (combined therapy). In combined therapy, the median of the interval between external irradiation and gold grain implants was 21 days. The treatment interval or patients with recurrent diseases was 22 days, 22, 27, 39 and 46, respectively. The progression rate showed a tendency to increase in the patients with longer interval (more than 21 days), and with partial regression after external irradiation and gold grain implantation is an important factor in combined therapy. Therefore, we emphasize that the time interval should be shorter than 3 weeks. (orig.) [Deutsch] Ziel dieser Untersuchung sind die Analyse der Behandlungsergebnisse der letzten neun Jahre bei Verwendung von Gold-Seed-Implantaten und die Bestimmung der Wertigkeit dieser Methode. Von Januar 1985 bis April 1993 wurden insgesamt 45 Patienten mit Plattenepithelkarzinomen der Mundhoehle und des Oropharynx mit {sup 198}Au-Seeds im Department of Radiology der Osaka University medical School behandelt. Die Ausgangsaktivitaet der Seeds war ueblicherweise 5 mCi (185 MBq), sie wurden woechentlich von der

  7. DNA-templated synthesis of PtAu bimetallic nanoparticle/graphene nanocomposites and their application in glucose biosensor

    OpenAIRE

    Leng, Jing; Wang, Wen-Min; Lu, Li-min; Bai, Ling; Qiu, Xin-Lan

    2014-01-01

    In this paper, single-stranded DNA (ss-DNA) is demonstrated to functionalize graphene (GR) and to further guide the growth of PtAu bimetallic nanoparticles (PtAuNPs) on GR with high densities and dispersion. The obtained nanocomposites (PtAuNPs/ss-DNA/GR) were characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectrometer (EDS), and electrochemical techniques. Then, an enzyme nanoassembly was prepared by self-assembling glucose oxidase (GOD) on PtAuNP/ss-DNA/GR ...

  8. Outils et analyse en physique des particules : morceaux choisis. La grille de calcul et de stockage pour le LHC : de la mise en place d'un nœud de grille à l'utilisation de la grille par l'expérience ATLAS. Mesure de la section efficace de production top-antitop avec l'expérience d0 auprès du Tevatron

    CERN Document Server

    Crépé-Renaudin, Sabine

    La recherche en physique des particules recouvre des activités diverses depuis la conception des expériences, la mise en route et le suivi des détecteurs, le traitement des données et leur analyse, jusqu'à la communication des résultats aux scientifiques et au grand public. Le document illustre différentes facettes de cette recherche via: la description de la grille de calcul et de stockage qui permet le traitement des données enregistrées par les expériences du LHC et en particulier par l'expérience ATLAS; une mesure de la section efficace top-antitop avec l'expérience D0 auprès du Tevatron; la description de quelques actions de diffusion des connaissances auprès du grand public.

  9. Synthèse de nouveaux polyesters “verts” issus de ressources oléagineuses : application au renfort au choc du poly(L-lactide)

    OpenAIRE

    Lebarbe, Thomas

    2013-01-01

    Dans cette étude, plusieurs voies ont été explorées dans l’objectif d’utiliser des polyesters aliphatiques issus de ressources oléagineuses comme additifs pour le renfort au choc du poly(L-lactide) (PLLA). Dans un premier temps, des poly(ester-amide)s (PEAs) ont été synthétisés à partir de dérivés de l’huile de ricin. La relation structure-propriétés des PEAs obtenus a été clairement établie. La dispersion des PEAs (à différents taux) par extrusion à l’état fondu dans une matrice de PLLA a en...

  10. Application of an asymmetric flow field flow fractionation multi-detector approach for metallic engineered nanoparticle characterization - Prospects and limitations demonstrated on Au nanoparticles

    International Nuclear Information System (INIS)

    Highlights: → In this study we present a size- and element selective method, outlined to characterize metallic ENPs, and demonstrated on engineered Au-NP. → A method for quantification of ionic- and particular fraction for nanoparticles in dispersions is presented. → Influence of membrane materials, carrier liquid and flow parameters for A4F was studied. → Comparison of MALLS and DLS for nanoparticle size determination was performed. → Coupling of ICPMS to the A4F, UV/vis and light scattering apparatus is shown. - Abstract: In this work we discuss about the method development, applicability and limitations of an asymmetric flow field flow fractionation (A4F) system in combination with a multi-detector setup consisting of UV/vis, light scattering, and inductively coupled plasma mass spectrometry (ICPMS). The overall aim was to obtain a size dependent-, element specific-, and quantitative method appropriate for the characterization of metallic engineered nanoparticle (ENP) dispersions. Thus, systematic investigations of crucial method parameters were performed by employing well characterized Au nanoparticles (Au-NPs) as a defined model system. For good separation performance, the A4F flow-, membrane-, and carrier conditions were optimized. To obtain reliable size information, the use of laser light scattering based detectors was evaluated, where an online dynamic light scattering (DLS) detector showed good results for the investigated Au-NP up to a size of 80 nm in hydrodynamic diameter. To adapt large sensitivity differences of the various detectors, as well as to guarantee long term stability and minimum contamination of the mass spectrometer a split-flow concept for coupling ICPMS was evaluated. To test for reliable quantification, the ICPMS signal response of ionic Au standards was compared to that of Au-NP. Using proper stabilization with surfactants, no difference for concentrations of 1-50 μg Au L-1 in the size range from 5 to 80 nm for citrate

  11. Core-shell Au/Ag nanoparticles embedded in silicate sol-gel network for sensor application towards hydrogen peroxide

    Indian Academy of Sciences (India)

    Shanmugam Manivannan; Ramasamy Ramaraj

    2009-09-01

    The electrocatalytic activity of core-shell Au100-Ag ( = 15, 27, 46, and 60) bimetallic nanoparticles embedded in methyl functionalized silicate MTMOS network towards the reduction of hydrogen peroxide was investigated by using cyclic voltammetry and chronoamperometric techniques. Core-shell Au/Ag bimetallic nanoparticles were characterized by absorption spectra and HRTEM. The MTMOS silicate sol-gel embedded Au73Ag27 core-shell nanoparticles modified electrode showed better synergistic electrocatalytic effect towards the reduction of hydrogen peroxide when compared to monometal MTMOS-Aunps and MTMOS-Agnps modified electrodes. These modified electrodes were studied without immobilizing any enzyme in the MTMOS sol-gel matrix. The present study highlights the influence of molar composition of Ag nanoparticles in the Au/Ag bimetallic composition towards the electrocatalytic reduction and sensing of hydrogen peroxide in comparison to monometal Au and Ag nanoparticles.

  12. Fusion d'images: application au contr\\^ole de la distribution des biopsies prostatiques

    CERN Document Server

    Mozer, Pierre; Chevreau, G; Troccaz, Jocelyne

    2008-01-01

    This paper is about the application of a 3D ultrasound data fusion technique to the 3D reconstruction of prostate biopies in a reference volume. The method is introduced and its evaluation on a series of data coming from 15 patients is described.

  13. Synthesis, characterization and in vitro biocompatibility study of Au/TMC/Fe3O4 nanocomposites as a promising, nontoxic system for biomedical applications

    Directory of Open Access Journals (Sweden)

    Hanieh Shirazi

    2015-08-01

    Full Text Available The unique properties and applications of iron oxide and Au nanoparticles have motivated researchers to synthesize and optimize a combined nanocomposite containing both. By using various polymers such as chitosan, some of the problems of classic core–shell structures (such as reduced saturation magnetization and thick coating have been overcome. In the present study, chitosan and one of its well-known derivatives, N-trimethylchitosan (TMC, were applied to construct three-layer nanocomposites in an Au/polymer/Fe3O4 system. It was demonstrated that replacement of chitosan with TMC reasonably improved the properties of the final nanocomposites including their size, magnetic behavior and thermal stability. Moreover, the results of the MTT assay showed no significant cytotoxicity effect when the Au/TMC/Fe3O4 nanocomposites were applied in vitro. These TMC-containing magnetic nanoparticles are well-coated by Au nanoparticles and have good biocompatibility and can thus play the role of a platform or a label in various fields of application, especially the biomedical sciences and biosensors.

  14. Détection et suivi visuels robustes d'objets complexes : applications au rendezvous spatial autonome

    OpenAIRE

    Petit, Antoine

    2013-01-01

    In this thesis, we address the issue of fully localizing a known object through computer vision, using a monocular camera, what is a central problem in robotics. A particular attention is here paid on space robotics applications, with the aims of providing a unified visual localization system for autonomous navigation purposes for space rendezvous and proximity operations. Two main challenges of the problem are tackled: initially detecting the targeted object and then tracking it frame-by-fra...

  15. Approche économique de l'exploration des stockages souterrains de gaz en nappe aquifère Economic Approach to Exploration for Underground Gas Storage Facilities in Aquifers

    Directory of Open Access Journals (Sweden)

    Colonna J.

    2006-11-01

    Full Text Available Dans le cadre de la recherche des stockages souterrains de gaz, le Département Réservoirs Souterrains de Gaz de France est amené à établir un programme d'exploration destiné à sélectionner définitivement, et au moindre coût, les structures capables de satisfaire la demande. Cette sélection passe par une estimation des probabilités de rejet ou d'abandon affectant les différentes structures susceptibles de donner lieu à une exploration. Il faut ensuite constituer le programme d'exploration de chacun des sites retenus après cet examen; ce programme consiste en une liste d'opérations (forage, sismique, essai hydraulique, forage à faible profondeur etc. qui mettront le plus vite possible en évidence : - d'une part les défauts; - d'autre part les principales caractéristiques techniques de la structure étudiée. La règle est d'atteindre la décision sur la faisabilité du site au stockage avec le moindre coût d'exploration. Pour ce faire, une analyse détaillée des causes potentielles d'abandon (recensement des défauts permet de choisir les opérations à effectuer, et d'associer à chacun des défauts recensés, l'opération ou l'ensemble d'opérations permettant de le détecter de façon certaine. Alors les estimateurs économiques tels que l'espérance de dépense, le risque financier, l'espérance de gain, sont calculés pour chacun des programmes, en vue de déterminer l'ordre d'exécution optimal des opérations. L'intérêt d'une telle approche, en ce qui concerne la réduction des dépenses d'exploration, est illustré par un exemple. As part of its work concerning the search for underground gas storage sites, the Underground Storage Department of Gaz de France has established an exploration program for the definitive and lowcost selection of suitable geological structures. This selection involves estimating probabilities of rejecting or abandoning different structures liable to be targets for exploration. The

  16. Interface controlled growth of nanostructures in discontinuous Ag and Au thin films fabricated by ion beam sputter deposition for plasmonic applications

    Indian Academy of Sciences (India)

    R Brahma; M Ghanashyam Krishna

    2012-08-01

    The growth of discontinuous thin films of Ag and Au by low energy ion beam sputter deposition is reported. The study focuses on the role of the film–substrate in determining the shape and size of nanostructures achieved in such films. Ag films were deposited using Ar ion energy of 150 eV while the Au films were deposited with Ar ion energies of 250–450 eV. Three types of interfaces were investigated in this study. The first set of film–substrate interfaces consisted of Ag and Au films grown on borosilicate glass and carbon coated Cu grids used as substrates. The second set of films was metallic bilayers in which one of the metals (Ag or Au) was grown on a continuous film of the other metal (Au or Ag). The third set of interfaces comprised of discontinuous Ag and Au films deposited on different dielectrics such as SiO2, TiO2 and ZrO2. In each case, a rich variety of nanostructures including self organized arrays of nanoparticles, nanoclusters and nanoneedles have been achieved. The role of the film–substrate interface is discussed within the framework of existing theories of thin film nucleation and growth. Interfacial nanostructuring of thin films is demonstrated to be a viable technique to realize a variety of nanostructures. The use of interfacial nanostructuring for plasmonic applications is demonstrated. It is shown that the surface Plasmon resonance of the metal nanostructures can be tuned over a wide range of wavelengths from 400 to 700 nm by controlling the film–substrate interface.

  17. Cfd Engine Applications At Fiat Research Centre Applications de la modélisation 3D au FIAT Research Centre

    Directory of Open Access Journals (Sweden)

    Lisbona M. G.

    2006-12-01

    Full Text Available The CFD (computer fluid dynamic simulation of the complete engine cycle of the 2400 cm3 JTD 10 V engine for the Alfa Romeo 156 is presented. The intake stroke analysis has followed a procedure usually applied at CRF for gasoline engines. Spray and combustion analysis at the selected operating condition of 3500 tr/min and 13 bar BMEP (brake mean effective pressure has given results in fair agreement with the experimental data, but revealed the need of more accurate models for the initial phase of combustion. Finally, the simulation of the exhaust phase has required great care in the set-up of the initial field and boundary conditions. Flow field characteristics are discussed at two crank angles, corresponding to peak values of the exhaust mass flow rate. Cet article présente la simulation 3D du cycle complet du moteur 2400 cm3 JTD 10 V de l'Alfa Romeo 156. L'analyse de la phase d'admission a suivi une procédure habituellement utilisée pour les moteurs à essence. L'analyse du spray et de la combustion au régime choisi de 3500 tr/min et 13 bar de PMI se compare raisonnablement aux essais, mais indique qu'une meilleure description de la phase initiale de la combustion est nécessaire. La simulation de la phase d'échappement a requis une grande attention quant à la spécification du champ initial et des conditions aux limites. On étudie ici les caractéristiques de l'écoulement à deux instants de cycles correspondant à des maxima de débits à l'échappement.

  18. Contributions au traitement statistique du signal avec des applications biomédicales

    OpenAIRE

    Nguyen, Quang Thang

    2012-01-01

    Cette étude présente des contributions en traitement statistique du signal avec des applications biomédicales. La thèse est divisée en deux parties. La première partie traite de la détection des hotspots à l'interface des protéines. Les hotspots sont les résidus dont les contributions énergétiques sont les plus importantes dans l'interaction entre protéines. Les forêts aléatoires (Random Forests) sont utilisées pour la classification. Une nouvelle famille de descripteurs de hotspot est égalem...

  19. Embrittlement of steels for hydrogen transport and storage under high pressure; Fragilisation des aciers destines au transport et au stockage de l'hydrogene sous haute pression

    Energy Technology Data Exchange (ETDEWEB)

    Jouinot, P.; Gantchenko, V.; Katundi, D. [Institut Superieur de Mecanique de Paris (ISMEP-Sumeca), 93 - Saint-Ouen (France)

    2007-07-01

    This work deals with gaseous hydrogen embrittlement of steels for pipelines having a relatively high mechanical resistance (elasticity limit: 550 MPa, Grade 80). The studied materials come from 5 tube steels batch already used for hydrocarbons transport. Plates have been obtained by continuous casting followed by a hot controlled rolling: the rolling temperature is adjusted for obtaining a strain hardening in order to increase the mechanical resistance of the steel. These materials have been tested under hydrogen pressure and the resistance to hydrogen has been measured for each of them. The results show that the hydrogen embrittlement decreases when the mechanical resistance of the plate (or its hardness) increases. The inclusion state of the different steels has been quantified by images analysis at different depths in the plates. These steels contain only globular oxides or aligned aluminates. The hydrogen embrittlement increases with the amount of the globular oxides (or with the length of the aligned aluminates). Micrographic and fractographic analyses show that even small globular inclusions ({phi}=1 {mu}m) concentrate enough hydrogen to induce a crack in the material or to lead to a crack propagation. In order to estimate the homogeneity of the ferrito-perlitic structure, the thickness of ferrite bands have been measured. The hydrogen embrittlement increases as the thickness of the ferrite bands, that is to say, as the heterogeneity of the structure. Micrographs have shown that the hydrogen cracking is initiated on perlite aggregates; the crack propagates then in ferrite and joins then others perlitic areas. This study shows that relatively resistant steels (Grade 80, elasticity limit: 550 MPa) can be used for manufacturing pipelines submitted to high hydrogen pressure. (O.M.)

  20. Fluorescent Properties of Au Nanoclusters and Their Biological Applications%金团簇的荧光性质及其生物应用

    Institute of Scientific and Technical Information of China (English)

    任娟; 代雯乐; 付欣; 苏梦; 蔡晶晶; 马占芳

    2011-01-01

    金纳米团簇作为一类新型纳米材料具有独特的光学特性。当金纳米团簇颗粒的尺寸小到与电子的费米波长(〈1nm)相当时,由于量子尺寸效应,金颗粒会受激发射出荧光。作为一种新型荧光材料,金纳米团簇具有发光颜色随团簇尺寸可调、荧光不易猝灭等许多优势。本文主要综述了金纳米团簇的荧光性质及其在生物标记、生物成像以及生物检测等方面的应用。%Au nanoclusters have emerged as a class of materials with unique optical properties.When the size of Au nanocluster decrease to comparable to the Fermi wavelength(1nm) of an electron,it exhibits fluorescent characteristics while they are excited,which resulted from its quantum effect.As a novel fluorescent material,Au nanoclusters show size-dependent emission,a slower photobleaching rate and very good stability.The fluorescent properties of Au nanoclusters and their applications in the fields of biological labeling,biological imaging,and biodetection were mainly reviewed.

  1. Application of EIS with Au-Hg microelectrode in determining electron transfer mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Bai, X. [College of Marine Studies, University of Delaware, Lewes, DE 19958 (United States); Dexter, S.C. [College of Marine Studies, University of Delaware, Lewes, DE 19958 (United States)]. E-mail: dexter@udel.edu; Luther, G.W. [College of Marine Studies, University of Delaware, Lewes, DE 19958 (United States)

    2006-01-20

    The objective of this study was to investigate the application of microelectrodes with electrochemical impedance spectroscopy (EIS) for distinguishing between one- and two-electron transfer electrochemical reactions occurring within marine microbial biofilms. In our study, both gold and gold-mercury amalgam microelectrodes with tip diameters of 100 {mu}m were used. EIS measurements were performed at the half-wave potentials of the chemicals of interest in 0.5 M NaCl aqueous solutions containing 100 {mu}M each of FeCl{sub 3}, [Fe(Cat){sub 2}]{sup -}, [Fe(Cat){sub 3}]{sup 3-}, [Fe(4NCat){sub 3}]{sup 3-}, MnCl{sub 2}, FeCl{sub 2} and mixed solutions with two of those chemicals in NaCl solution or seawater. The results showed that there was a linear relationship between the impedance Z {sub re}, Z {sub im} and angular frequency {omega} {sup -1/2} obtained at phase angle of 45{sup o} for both one- and two-electron transfer reactions. One-electron transfer reactions could then be distinguished from two-electron transfer reactions by the slopes.

  2. Une chaîne de traitement de l'information géographique au service de l'application de la loi Littoral

    Directory of Open Access Journals (Sweden)

    Patrick GUILLOPÉ

    1994-09-01

    Full Text Available L’application de la loi Littoral nécessitait une approche nouvelle de la part de l’État et la mise en œuvre d’outils nouveaux pour une gestion à long terme. L’apport de traitements automatiques de l’information géographique a été ainsi testé au CETE Normandie-Centre sur trois des grands principes posés par cette loi.

  3. DNA-templated synthesis of PtAu bimetallic nanoparticle/graphene nanocomposites and their application in glucose biosensor

    Science.gov (United States)

    Leng, Jing; Wang, Wen-Min; Lu, Li-Min; Bai, Ling; Qiu, Xin-Lan

    2014-02-01

    In this paper, single-stranded DNA (ss-DNA) is demonstrated to functionalize graphene (GR) and to further guide the growth of PtAu bimetallic nanoparticles (PtAuNPs) on GR with high densities and dispersion. The obtained nanocomposites (PtAuNPs/ss-DNA/GR) were characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectrometer (EDS), and electrochemical techniques. Then, an enzyme nanoassembly was prepared by self-assembling glucose oxidase (GOD) on PtAuNP/ss-DNA/GR nanocomposites (GOD/PtAuNPs/ss-DNA/GR). The nanocomposites provided a suitable microenvironment for GOD to retain its biological activity. The direct and reversible electron transfer process between the active site of GOD and the modified electrode was realized without any extra electron mediator. Thus, the prepared GOD/PtAuNP/ss-DNA/GR electrode was proposed as a biosensor for the quantification of glucose. The effects of pH, applied potential, and temperature on the performance of the biosensor were discussed in detail and were optimized. Under optimal conditions, the biosensor showed a linearity with glucose concentration in the range of 1.0 to 1,800 μM with a detection limit of 0.3 μM (S/N = 3). The results demonstrate that the developed approach provides a promising strategy to improve the sensitivity and enzyme activity of electrochemical biosensors.

  4. Growth and electrical characterization of thin conductive Au nanoparticle chains on oxidized Si substrates between electrodes for sensor applications

    International Nuclear Information System (INIS)

    Citrate-stabilized colloid Au nanoparticles with an average diameter of 40 nm have been assembled in nanoparticle chains between microelectrodes on oxidized V-groove-etched Si surfaces by the technique of dielectrophoresis. Chain formation was investigated as a function of electrodes configuration and the amplitude and frequency of the applied electric field. Conductive thin (∝100-200 nm thick) single and multiple Au nanoparticle chains, with a length in the range of 1 to 10 μm, were preferentially formed on V-groove lines between the electrodes. Electrical characterization by temperature-dependent current-voltage measurements showed that the Au nanoparticle chains exhibit ohmic conductivity with a resistance in the range of few Ω to few kΩ, depending on the distance between electrodes and the configuration of the Au nanoparticles in the structure. On the contrary, 5 nm diameter tiopronin-stabilized Au NPs chains exhibited nearest- neighbour hopping conductivity and non-linear thermally-activated I-V characteristics. We also tested nanogap formation in the chains by an applied pulse of electric current, in view of applying the nanoparticle chains in the tracing of chemical or biological molecules. The conductive thin Au nanoparticle chains, with or without nanogaps, are interesting building blocks for different sensor devices. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  5. Electrocatalytic applications of a vertical Au nanorod array using ultrathin Pt/Ru/Pt layer-by-layer coatings

    International Nuclear Information System (INIS)

    This study compared the electro-oxidation of carbon monoxide adlayers formed on a codeposited and a layer-by-layer deposited Pt/Ru thin overlayer on a Au surface. Vertical arrays of smooth and nanoporous Au nanorods were used as a platform for the Pt/Ru overlayer-coating. The vertical arrays of Au nanorods served as high surface area templates, where the surface area could be controlled as a function of the rod length in a given geometrical surface area. A coating of the Au nanorod arrays with Pt/Ru via Cu underpotential deposition (UPD) steps allowed control of the overlayer thickness with an ultrathin film nature. The electronic modification of the Pt overlayer with a Ru underlayer became increasingly weaker with increasing Pt overlayer thickness. The thick Pt overlayer exhibited CO electro-oxidation that was similar to the electro-oxidation profile on the Pt bulk surface. Coating of the Au nanorod arrays with Pt/Ru through Cu UPD steps demonstrated an optimal electronic response between the Pt outer overlayer and the underlying Ru layer. It is expected that an ultrathin overlayer-coating strategy can be expanded to nanoporous Au nanorod arrays. These finding will facilitate better design of highly active Pt/Ru composite nanostructures for electrocatalysis

  6. Impact de la fissuration sur les propriétés de rétention d'eau et de transport de gaz des géomatériaux : Application au stockage géologique des déchets radioactifs

    OpenAIRE

    M'Jahad, Sofia

    2012-01-01

    In the context of geological disposal of radioactive waste, this work contributes to the characterization of the effect of diffuse damage on the water retention and gas transfer properties of concrete (CEM I and CEM V) selected by Andra, Callovo-Oxfordian argillite (host rock) and argillite / concrete interfaces. This study provides information on the concrete microstructure from Mercury porosimetry intrusion and water retention curves: each concrete has a distinct microstructure, CEM I concr...

  7. Étude des systèmes de stockage d'énergie cinétique pour véhicules

    OpenAIRE

    Terradellas Callau, Roger

    2009-01-01

    Ce travail de recherche cherche à établir quels sont les véhicules les plus appropriés pour y implémenter la technologie de stockage et récupération d’énergie qui est perdue sous forme de chaleur lors du freinage. Il s’agit de définir les paramètres du système de stockage d’énergie (KERS). Le logiciel développé, appelé KERSIM, permet faire un bilan énergétique en considérant les sources de pertes du système. Ce bilan énergétique concernant la phase d’utilisation est représenté ...

  8. Dimensionnement multi-objectif d'une association batterie – supercondensateur pour une application photovoltaïque

    OpenAIRE

    Dulout, Jérémy; Jammes, Bruno; Séguier, Lionel; Alonso, Corinne

    2016-01-01

    National audience Les énergies renouvelables comme le solaire photovoltaïque (PV) et l'éolien présentent une production intermittente et difficile à prédire précisément. Le stockage de l'énergie permet, a priori, d'assurer à chaque instant l'équilibre entre production et demande, condition nécessaire au bon fonctionnement de tout réseau électrique. Cependant, bien que les éléments de stockage électrochimique (ESE) soient adaptés pour remplir ce rôle, leur coût étant important, il est néces...

  9. étude des performances d'un systeme hybride (photovoltaique-eolien) , pour la production de l'electricité.application au site d'adrar.

    OpenAIRE

    MAOUEDJ, Rachid

    2014-01-01

    Ce travail porte sur l'étude et l'évaluation des performances d'un système autonome destiné à la production d'énergie électrique, couplant un champ photovoltaique, un aérogénérateur et disposant d'un système de stockage électrochimique à petite échelle.il comprend deux grandes parties : La première partie théorique, présente une modélisation et une simulation numérique des caractéristiques , des variations journalièes, saisonnières et annuelles du rayonnement solaire et d...

  10. Modélisation et commande d’un système De stockage photovoltaïque

    OpenAIRE

    BENDJAMAA, Ibrahim

    2012-01-01

    la production d’énergie par les systèmes photovoltaïques est très fluctuante et dépend énormément des conditions météorologiques. C’est pourquoi il faut penser à stocker cette énergie pour la restituer pendant la nuit et les jours « sans soleil » et pour mieux adapter le système pv en fixant la tension de système. Qans ce mémoire, une étude théorique sur l’énergie solaire photovoltaïque, ainsi que le système de stockage électrochimique à l’aide de batterie d’accumulateur sera présenté.la deux...

  11. Application de la methode des sous-groupes au calcul Monte-Carlo multigroupe

    Science.gov (United States)

    Martin, Nicolas

    This thesis is dedicated to the development of a Monte Carlo neutron transport solver based on the subgroup (or multiband) method. In this formalism, cross sections for resonant isotopes are represented in the form of probability tables on the whole energy spectrum. This study is intended in order to test and validate this approach in lattice physics and criticality-safety applications. The probability table method seems promising since it introduces an alternative computational way between the legacy continuous-energy representation and the multigroup method. In the first case, the amount of data invoked in continuous-energy Monte Carlo calculations can be very important and tend to slow down the overall computational time. In addition, this model preserves the quality of the physical laws present in the ENDF format. Due to its cheap computational cost, the multigroup Monte Carlo way is usually at the basis of production codes in criticality-safety studies. However, the use of a multigroup representation of the cross sections implies a preliminary calculation to take into account self-shielding effects for resonant isotopes. This is generally performed by deterministic lattice codes relying on the collision probability method. Using cross-section probability tables on the whole energy range permits to directly take into account self-shielding effects and can be employed in both lattice physics and criticality-safety calculations. Several aspects have been thoroughly studied: (1) The consistent computation of probability tables with a energy grid comprising only 295 or 361 groups. The CALENDF moment approach conducted to probability tables suitable for a Monte Carlo code. (2) The combination of the probability table sampling for the energy variable with the delta-tracking rejection technique for the space variable, and its impact on the overall efficiency of the proposed Monte Carlo algorithm. (3) The derivation of a model for taking into account anisotropic

  12. Biosynthesis and stabilization of Au and Au-Ag alloy nanoparticles by fungus, Fusarium semitectum

    International Nuclear Information System (INIS)

    Crystallized and spherical-shaped Au and Au-Ag alloy nanoparticles have been synthesized and stabilized using a fungus, F . semitectum in an aqueous system. Aqueous solutions of chloroaurate ions for Au and chloroaurate and Ag+ ions (1 : 1 ratio) for Au-Ag alloy were treated with an extracellular filtrate of F . semitectum biomass for the formation of Au nanoparticles (AuNP) and Au-Ag alloy nanoparticles (Au-AgNP). Analysis of the feasibility of the biosynthesized nanoparticles and core-shell alloy nanoparticles from fungal strains is particularly significant. The resultant colloidal suspensions are highly stable for many weeks. The obtained Au and Au-Ag alloy nanoparticles were characterized by the surface plasmon resonance (SPR) peaks using a UV-vis spectrophotometer, and the structure, morphology and size were determined by Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), and transmission electron microscopy (TEM). Possible optoelectronics and medical applications of these nanoparticles are envisaged.

  13. Photoelectrochemical studies of DNA-tagged biomolecules on Au and Au/Ni/Au multilayer nanowires

    Directory of Open Access Journals (Sweden)

    Swaminathan Viswanathan

    2011-01-01

    Full Text Available Abstract The use of nanowires (NWs for labeling, sensing, and sorting is the basis of detecting biomolecules attached on NWs by optical and magnetic properties. In spite of many advantages, the use of biomolecules-attached NWs sensing by photoelectrochemical (PEC study is almost non-existent. In this article, the PEC study of dye-attached single-stranded DNA on Au NWs and Au-Ni-Au multilayer NWs prepared by pulse electrodeposition are investigated. Owing to quantum-quenching effect, the multilayer Au NWs exhibit low optical absorbance when compared with Au NWs. The tagged Au NWs show good fluorescence (emission at 570 nm, indicating significant improvement in the reflectivity. Optimum results obtained for tagged Au NWs attached on functionalized carbon electrodes and its PEC behavior is also presented. A twofold enhancement in photocurrent is observed with an average dark current of 10 μA for Au NWs coated on functionalized sensing electrode. The importance of these PEC and optical studies provides an inexpensive and facile processing platform for Au NWs that may be suitable for biolabeling applications.

  14. Facile fabrication of truncated octahedral Au nanoparticles and its application for ultrasensitive surface enhanced Raman scattering immunosensing

    International Nuclear Information System (INIS)

    Monodispersed truncated octahedral (TOH) Au nanoparticles (NPs) with an average edge-length of about 16 nm were synthesized using poly(diallyldimethylammonium chloride) (PDDA) both as a stabilizing and reducing agent via a one-step reaction. Remarkably, no seeds, surfactants or additional reductant were used in this reaction. In addition, the PDDA molecules on the surface of the TOH AuNPs make them convenient for use in layer-by-layer assembly by electrostatic interactions. Importantly, the TOH AuNPs show a significant surface enhanced Raman scattering (SERS) activity, and can be directly used for building SERS-active substrates and tags. Based on these promising properties, an ultrasensitive SERS-based immunosensing platform was developed. Using human immunoglobulin (h-IgG) as a model target analyte, a detection limit of 36.56 fg ml−1 was reached. (paper)

  15. Current limitation properties of YBa2Cu3O7-δ/Au thin films: application to transformer connection

    International Nuclear Information System (INIS)

    In view of the development of superconducting fault current limiters, the properties of switching and recovering of YBa2Cu3O7-δ/Au (YBCO/Au) thin films are studied at 77 K and 50 Hz for overcurrents. The bilayers present an abrupt transition to a high dissipative state leading to a current limitation at a maximum value of about 2.5 times the critical current Ic, and allow the development of electric fields of 3 kV m-1 without any damage. After the overcurrent regime, the recovery of the superconducting state under the rated current In is studied as a function of overcurrent parameters. These results show clearly the strong potential of YBCO/Au thin films which can recover their superconducting state under nominal mode. This last point is crucial for transformer connection, as experimentally shown in this paper

  16. Application of Cl2/BCl3/Ar Plasma Treatment in the Improvement of Ti/Al/Mo/Au Ohmic Contacts

    Directory of Open Access Journals (Sweden)

    Jacek Gryglewicz

    2016-01-01

    Full Text Available Significant improvement of Ti/Al/Mo/Au ohmic contacts deposited on previously Cl2/BCl3/Ar plasma treated surface was observed. The standard deviation of contact resistance was crucially reduced due to the incorporation of Cl2/BCl3/Ar plasma treatment. The Cl2:BCl3:Ar gas mixture was used in order to thin the top of AlGaN layer prior to deposition of Ti/Al/Mo/Au ohmic contacts. The surface morphology of AlGaN was investigated using scanning electron microscopy and atomic force microscopy. TLM measurements revealed a consequential decrease of contact resistivity.

  17. Intrathecal application of 198Au colloid in acute leukemia and non-Hodgkin's lymphoma in chilhood. 2

    International Nuclear Information System (INIS)

    7 children suffering from acute lymphatic leukemia (ALL) and non-Hodgkin's lymphoma, resp., were injected intrathecally with 198Au colloid for metaphylaxis. The children had been cured of 8 relapses of miningosis and received irregularly intrathecal injections of methotrexate for cerebral maintenance therapy. The median cerebral period of remission was 52 weeks. 1 child suffering from ALL had been free from meningosis relapses for 128 weeks. Continuous cytostatic therapy is necessary for methaphylaxis. However, despite of the good results presented, 198Au colloid can not be recommended for long-term therapy because radiation injuries are to be expected. (author)

  18. Comparison of some morphological and absorption properties of the nanoparticles Au/TiO2 embedded films prepared by different technologies on the substrates for application in the plasmonic solar cell

    International Nuclear Information System (INIS)

    The nanoparticle Au/TiO2 embedded system plays a very important role in the plasmonic solar cell. The features of the nanoparticle embedded system will determine light enhancement, light absorption, scattering and localized surface plasmon resonance (LSPR), aiming to enhance the efficiency of the plasmatic solar cell. The characterizations of nanoparticles Au/TiO2 embedded system consist of many parameters: the sizes of nanoparticles (Au, TiO2), the weight ratio of Au to TiO2, the thickness of the single layer or multilayer of Au/TiO2, the arrangements of Au and TiO2 nanoparticles in integrated-matrix system, the light absorption, scattering and LSPR capacities of the Au/TiO2 system. These parameters, however, depend on the technological conditions, the structure of plasmonic solar cell as well as the used substrate materials. This paper presents some technological developments for nanoparticles Au/TiO2 embedded systems by different methods, including the preparation of the mixer Au/TiO2 solutions and fabrication of the nanoparticle Au/TiO2 systems with different Au percentages on several substrates (glass/ITO and AAO(Al)/Si…), and measured results of the morphological, structural and optical properties using FESEM, EDX, UV–vis spectroscopy. The comparisons of experiment results between different technology conditions and substrates (glass/ITO, AAO(Al)/Si…) are also shown and discussed with the aim of choosing the suitable technological process and technological conditions for application in the plasmonic solar cell. (paper)

  19. Silver Nanopartical over AuFON Substrate for Enhanced Raman Readout and Their Application in Pesticide Monitoring

    Directory of Open Access Journals (Sweden)

    Kun Guo

    2015-04-01

    Full Text Available Surface-enhanced Raman detection of thiram is demonstrated by using Ag-nanoparticles (Ag NPs on Au film over nanosphere (AuFON substrate as the hybrid substrate. The SERS signal of the Ag NPs attached to solid supports is studied. The close coupling together of thousands of Ag NPs on AuFON leads to the generation of hot spots for SERS. The Ag NPs on AuFON can be applied to detect rhodamine-6G (R6G with the detection limitation of 10−11 M and the pesticide thiram in acetone with a detection limit of as low as 0.24 ppm, which is much lower than the maximal residue limit (MRL of 7 ppm in fruit prescribed by the U.S. Environmental Protection Agency (EPA. The hybrid substrates are shown to be highly sensitive for the detection of thriam, which produce highly enhanced Raman signals with good uniformity and reproducibility due to having plenty of hot spots on its surface.

  20. Fast and facile preparation of CTAB based gels and their applications in Au and Ag nanoparticles synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Ravi Kant, E-mail: rkupadhyay85@gmail.com [Department of Chemistry, School of Natural Sciences, Shiv Nadar University, Gautam Budh Nagar, 201314 Uttar Pradesh (India); Soin, Navneet, E-mail: n.soin@bolton.ac.uk [Knowledge Centre for Materials Chemistry (KCMC), Institute for Materials Research and Innovation (IMRI), University of Bolton, Deane Road, Bolton BL3 5AB (United Kingdom); Saha, Susmita, E-mail: ssaha@bose.res.in [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700 098 (India); Barman, Anjan, E-mail: abarman@bose.res.in [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700 098 (India); Sinha Roy, Susanta, E-mail: susanta.roy@snu.edu.in [Department of Physics, School of Natural Sciences, Shiv Nadar University, Gautam Budh Nagar, 201314 Uttar Pradesh (India)

    2015-04-15

    We have demonstrated that the gel-like mesophase of Cetyltrimethylammonium bromide (CTAB) can be synthesized by judicial adjustment of water to surfactant molar ratio (W{sub 0}), without using any additional salts, gelating agents or co-surfactants. Gel formation was found to be highly dependent on the water to surfactant molar ratio (W{sub 0}), with the lowest value of W{sub 0} (41.5) resulting in rapid gel formation. Environmental scanning electron microscope (ESEM) analysis revealed that the gel was comprised of interconnected cylindrical structures. The presence of hydrogen bonding in the gel-like mesophase was confirmed by Fourier Transform Infrared spectroscopy (FTIR) analysis. Rheology measurements revealed that all the gel samples were highly viscoelastic in nature. Furthermore, Au and Ag containing CTAB gels were explored as precursors for the preparation of spherical Gold (Au) and Silver (Ag) nanoparticles using Sodium borohydride (NaBH{sub 4}) as reducing agent. The effects of NaBH{sub 4} concentration on the particle size and morphology of the Au and Ag nanoparticles have also been studied. - Highlights: • A facile synthesis of CTAB based gel-like mesophase is reported. • CTAB gels were obtained by adjusting water to surfactant molar ratio (W{sub 0}). • FTIR analysis revealed that hydrogen bonding plays a key role in gel formation. • Au, Ag nanoparticles were synthesized by using CTAB gel and NaBH{sub 4}.

  1. Fast and facile preparation of CTAB based gels and their applications in Au and Ag nanoparticles synthesis

    International Nuclear Information System (INIS)

    We have demonstrated that the gel-like mesophase of Cetyltrimethylammonium bromide (CTAB) can be synthesized by judicial adjustment of water to surfactant molar ratio (W0), without using any additional salts, gelating agents or co-surfactants. Gel formation was found to be highly dependent on the water to surfactant molar ratio (W0), with the lowest value of W0 (41.5) resulting in rapid gel formation. Environmental scanning electron microscope (ESEM) analysis revealed that the gel was comprised of interconnected cylindrical structures. The presence of hydrogen bonding in the gel-like mesophase was confirmed by Fourier Transform Infrared spectroscopy (FTIR) analysis. Rheology measurements revealed that all the gel samples were highly viscoelastic in nature. Furthermore, Au and Ag containing CTAB gels were explored as precursors for the preparation of spherical Gold (Au) and Silver (Ag) nanoparticles using Sodium borohydride (NaBH4) as reducing agent. The effects of NaBH4 concentration on the particle size and morphology of the Au and Ag nanoparticles have also been studied. - Highlights: • A facile synthesis of CTAB based gel-like mesophase is reported. • CTAB gels were obtained by adjusting water to surfactant molar ratio (W0). • FTIR analysis revealed that hydrogen bonding plays a key role in gel formation. • Au, Ag nanoparticles were synthesized by using CTAB gel and NaBH4

  2. Magnetic gold nanocatalyst (nanocat-Fe–Au): catalytic applications for the oxidative esterification and hydrogen transfer reactions

    Science.gov (United States)

    An efficient and sustainable protocol is described for the oxidative esterification of aldehydes and the reduction of aromatic nitro compounds that uses magnetically separable and reusable maghemite-supported gold nanocatalyst (nanocat-Fe-Au) under mild conditions. The complex ch...

  3. Pré-dimensionnement par simulations dynamiques d’un réacteur de stockage thermochimique assurant l’autonomie d’un système solaire combiné.

    OpenAIRE

    Hennaut, Samuel; Thomas, Sébastien; Andre, Philippe; Courbon, Emilie; Le Berigot, Tangi; Frère, Marc

    2011-01-01

    Etude du stockage de l’énergie solaire thermique sous forme thermochimique comme moyen d’assurer l’autonomie thermique d’une habitation basse énergie. La surface de capteurs nécessaire et les caractéristiques du stockage sont étudiées par simulation dynamique (TRNSYS), de manière générale et pour des couples adsorbant/adsorbat particuliers (CaCl2/H2O et Charbon actif/Méthanol). Un système solaire combiné avec 14,4 m² de capteurs plans et un stockage thermochimique de 12,35 m³ de CaCl2 permet ...

  4. Joint Inversion of Fracture Model Properties for CO2 Storage Monitoring or Oil Recovery History Matching Inversion conjointe des propriétés d’un modèle de fractures pour le monitoring d’un stockage de CO2 ou le calage d’un historique de production

    Directory of Open Access Journals (Sweden)

    Verscheure M.

    2012-06-01

    properties are preserved during the deformation process. These different steps are demonstrated on a realistic synthetic case. Que ce soit pour la production de pétrole ou le stockage de CO2, le terme réservoir est utilisé régulièrement. Un réservoir désigne une structure géologique hétérogène en types de roches ou en termes de propriétés de perméabilité et de porosité. Dans le domaine pétrolier, de nombreux réservoirs présentent des fractures ou des failles. Les réservoirs fracturés occupent une part importante de la production de pétrole dans le monde (Moyen Orient, Golfe du Mexique, etc.. Malgré la présence de fractures, ces réservoirs n’en restent pas moins de bons réservoirs. Des études de réservoirs dédiés au stockage de CO2 ont montré de plus la présence de fractures diffuses ou de failles ainsi qu’un fort impact de celles-ci dans le transfert du CO2. Un facteur clé de la connaissance des réservoirs fracturés est la compréhension de la géométrie et de la conductivité hydraulique du réseau formé par les fractures. Cette compréhension nécessite la construction d’un modèle de réservoir intégrant l’ensemble des connaissances conceptuelles et des données disponibles sur le terrain. Le présent article expose une méthodologie permettant d’effectuer un calage d’historique d’un modèle réservoir par la modification des propriétés et de la géométrie d’un réseau de failles sub-sismiques. Un modèle original de réseau de failles sub-sismiques est présenté. Il est fondé sur une caractérisation fractale de la géométrie du réseau des failles à partir des données sismiques ou des affleurements. Ce modèle peut être simulé en étendant l’organisation du réseau des failles sismiques à l’échelle inférieure des failles sub-sismiques. Le réseau de failles obtenu peut alors être déformé de façon à refléter le comportement hydrodynamique du réservoir. Cette propriété permet d’effectuer le

  5. A Fabrication Route for Arrays of Ultra-low-Noise MoAu Transition Edge Sensors on Thin Silicon Nitride for Space Applications

    CERN Document Server

    Glowacka, D M; Goldie, D J; Withington, S

    2014-01-01

    We describe a process route to fabricate arrays of Ultra-low-Noise MoAu Transition Edge Sensors (TESs). The low thermal conductance required for space applications is achieved using 200 nm-thick Silicon Nitride (SiNx ) patterned to form long-thin legs with widths of 2.1 {\\mu}m. Using bilayers formed on SiNx islands from films with 40 nm-thick Mo and Au thicknesses in the range 30 to 280 nm deposited by dc-sputtering in ultra-high vacuum we can obtain tunable transition temperatures in the range 700 to 70 mK. The sensors use large-area absorbers fabricated from high resistivity, thin-film beta-phase Ta to provide impedance-matching to incident radiation. The absorbers are patterned to reduce the heat capacity associated with the nitride support structure and include Au thermalizing features to assist the heat flow into the TES. Arrays of 400 detectors at the pixel spacing required for the long-wavelength band of the far-infrared instrument SAFARI are now being fabricated. Device yields approaching 99% are achi...

  6. Thin-films interdiffusion Ti/Pd/Au, Ti/Au/Pd

    International Nuclear Information System (INIS)

    Rutherford backscattering spectroscopy (RBS) is used to study the interdiffusion in Ti/Pd/Au and Ti/Au/Pd thin films system. The purpose of our study is to prepare an alloy of high resistance against corrosion, due to its important use in space industries, optical and visual receivers. In addition to another scientific results for future applications. Interdiffusion in the Ti/Pd/Au thin film system is measured using Rutherford backscattering. Interdiffusion rates of Pd/Au for temperatures between 200 and 490 centigrade degree have been correlated with the defect structure of the films. Air, as compared with vacuum, annealing enhances interdiffusion in the Ti/Au couple and inhibits interdiffusion in Ti/Pd, Ti/Pd and Ti/Au interdiffusion in the Ti/Pd/Au and Ti/Au/Pd ternary systems is strongly reduced in comparison with interdiffusion in the corresponding Ti/Pd or Ti/Au couples for vacuum annealing. (Author)

  7. A simple approach to the synthesis of eccentric Au@SiO2 Janus nanostructures and their catalytic applications

    Science.gov (United States)

    Zhao, Yang; Yang, Di; Hu, Huicheng; Chen, Lei; Xu, Yong; Qu, Lili; Yang, Peipei; Zhang, Qiao

    2016-06-01

    In this paper, we present a simple method to synthesize eccentric Au@SiO2 Janus nanoparticles. By simply tuning the concentration of poly(vinyl pyrrolidone) (PVP), the surface of gold nanoparticle can be partially or fully wrapped with the amphiphilic ligand. As a result, Janus nanoparticle or concentric core-shell nanostructures can be obtained, respectively. A systematic study has been carried out to confirm the function of PVP molecules. The as-prepared Janus nanoparticle can act as a catalyst to catalyze the reduction of 4-nitrophenol, while the core-shell nanostructure is not active due to the coverage of dense silica shell. This work provides a robust and scalable method to produce Au@SiO2 Janus nanoparticles.

  8. Intrathecal application of 198Au-colloid in children suffering from leukemia and non-Hodgkin's disease

    International Nuclear Information System (INIS)

    26 children suffering from acute leukemia and non-Hodgkin lymphoma (group 1) received intrathecal Au-198-colloid injections as a prophylactic measure against central nervous system (CNS) relapses. No primary CNS relapses were observed in the period from 1 Sep. 1974 to 31 Oct. 1978. Two children were taken ill at the same time with meningosis leucaemica in the first and second relapse, respectively. Four children (group 2) were treated with Au-198-colloid after overcoming a meningosis leucaemica. It was not possible to prevent another CNS relapse in all four patients of this group. Clinical status, liquor tests and EEG examinations carried out after the therapy showed good tolerance of the gold colloid. (author)

  9. Adsorption between TC-stabilized AuNPs and the phosphate group: application of the PTP1B activity assay.

    Science.gov (United States)

    Lv, Jun; Wang, Xiaonan; Zhang, Yuanyuan; Li, Defeng; Zhang, Juan; Sun, Lizhou

    2015-12-01

    Based on the adsorption between tetracycline (TC) and phosphate groups, a general colorimetric method is explored in this work by using TC-stabilized gold nanoparticles (TC/AuNPs) and 4-aminophenyl phosphate-functionalized Fe3O4 magnetic nanoparticles (APP/MNPs). Taking protein tyrosine phosphatase 1B (PTP1B) as an example, 4-aminophenyl phosphate (APP) can be hydrolyzed into 4-aminophenol (AP) by PTP1B, resulting in the disappearance of the phosphate group on the outer layer of MNPs and the loss of corresponding adsorptive ability. Upon addition of TC/AuNP solution, TC/AuNPs will remain in the supernatant solution after magnetic separation and a high absorbance value can be observed. So PTP1B activity is related to the concentrations of TC/AuNPs in the supernatant solution. In this work, the enzyme activity can be determined at levels as low as 0.0885 U mL(-1) and over a linear detection range as wide as 0.1 U mL(-1) to 0.9 U mL(-1). Moreover, using the proposed method, the inhibition effect of betulinic acid (BA) and sodium orthovanadate (Na3VO4) on PTP1B activity can be tested with IC50 values of 30 μM and 4 μM, respectively. Therefore, a universal platform for the accurate colorimetric analysis of kinase and phosphatase activities can be established through the adsorption between TC and phosphate groups. PMID:26523458

  10. Electronic Characterization of Au/DNA/ITO Metal-Semiconductor-Metal Diode and Its Application as a Radiation Sensor.

    Science.gov (United States)

    Al-Ta'ii, Hassan Maktuff Jaber; Periasamy, Vengadesh; Amin, Yusoff Mohd

    2016-01-01

    Deoxyribonucleic acid or DNA molecules expressed as double-stranded (DSS) negatively charged polymer plays a significant role in electronic states of metal/silicon semiconductor structures. Electrical parameters of an Au/DNA/ITO device prepared using self-assembly method was studied by using current-voltage (I-V) characteristic measurements under alpha bombardment at room temperature. The results were analyzed using conventional thermionic emission model, Cheung and Cheung's method and Norde's technique to estimate the barrier height, ideality factor, series resistance and Richardson constant of the Au/DNA/ITO structure. Besides demonstrating a strongly rectifying (diode) characteristic, it was also observed that orderly fluctuations occur in various electrical parameters of the Schottky structure. Increasing alpha radiation effectively influences the series resistance, while the barrier height, ideality factor and interface state density parameters respond linearly. Barrier height determined from I-V measurements were calculated at 0.7284 eV for non-radiated, increasing to about 0.7883 eV in 0.036 Gy showing an increase for all doses. We also demonstrate the hypersensitivity phenomena effect by studying the relationship between the series resistance for the three methods, the ideality factor and low-dose radiation. Based on the results, sensitive alpha particle detectors can be realized using Au/DNA/ITO Schottky junction sensor. PMID:26799703

  11. The graphene/Au/Ni interface and its application in the construction of a graphene spin filter

    International Nuclear Information System (INIS)

    A modification of the contact of graphene with ferromagnetic electrodes in a model of the graphene spin filter allowing restoration of the graphene electronic structure is proposed. It is suggested for this aim to intercalate into the interface between the graphene and the ferromagnetic (Ni or Co) electrode a Au monolayer to block the strong interaction between the graphene and Ni (Co) and, thus, prevent destruction of the graphene electronic structure which evolves in direct contact of graphene with Ni (Co). It is also suggested to insert an additional buffer graphene monolayer with the size limited by that of the electrode between the main graphene sheet providing spin current transport and the Au/Ni electrode injecting the spin current. This will prevent the spin transport properties of graphene from influencing contact phenomena and eliminate pinning of the graphene electronic structure relative to the Fermi level of the metal, thus ensuring efficient outflow of injected electrons into the graphene. The role of the spin structure of the graphene/Au/Ni interface with enhanced spin–orbit splitting of graphene π states is also discussed, and its use is proposed for additional spin selection in the process of the electron excitation. (paper)

  12. Introduction au droit commercial

    OpenAIRE

    Thirion, Nicolas; Delvaux, Thierry; Benoit-Moury, Anne

    2009-01-01

    Le cours d'introduction au droit commercial, destiné à des non-juristes, a pour objet de décrire, dans ses grandes lignes, le régime juridique applicable à l'organisation et au fonctionnement de l'économie. Les liens avec des disciplines autres que le droit, notamment l'économie et l'histoire, seront privilégiés, afin d'adapter la matière aux besoins et centres d'intérêts d'étudiants en sciences humaines. Après une introduction générale, le cours s'articule autour de la trilogie fondamentale ...

  13. Pt@AuNPs integrated quantitative capillary-based biosensors for point-of-care testing application.

    Science.gov (United States)

    Wu, Ze; Fu, Qiangqiang; Yu, Shiting; Sheng, Liangrong; Xu, Meng; Yao, Cuize; Xiao, Wei; Li, Xiuqing; Tang, Yong

    2016-11-15

    Current diagnostic technologies primarily rely on bulky and costly analytical instruments. Therefore, cost-effective and portable diagnosis tools that can be used for point-of-care tests (POCT) are highly desirable. In this study, we report a cost-effective, portable capillary-based biosensor for quantitative detection of biomarkers by the naked eye. This capillary-based biosensor was tested by measuring the distance of blue ink movement, which was directly correlated with the oxygen (O2) produced by efficient core-shell Pt@Au nanoparticles (Pt@AuNPs) catalysts decomposed hydrogen peroxide (H2O2). By linking the Pt@AuNPs with antibodies, capillary-based biosensor sandwich immunoassays were constructed. The concentrations of the target proteins were positively correlated with the distances of ink movement. To demonstrate their performance, the biosensors were used to detect the cancer biomarker sprostate-specific antigen (PSA) and carcinoembryonic antigen (CEA). The linear detection range (LDR) of the capillary-based biosensor for detecting PSA was from 0.02 to 2.5ng/mL, and the limit of detection (LOD) was 0.017ng/mL. LDR of the biosensor for detecting CEA was from 0.063 to 16ng/mL, and the LOD was 0.044ng/mL. For detection of PSA and CEA in clinical serum samples, the detection results of the capillary-based biosensor were well correlate with the results from of chemiluminescence immunoassays (CLIAs). Thus, the capillary-based biosensor may potentially be a useful strategy for point-of-care testing, in addition to being portable and cost effective. PMID:27240013

  14. Algorithmes Heuristiques et Techniques d'Apprentissage : Applications au Problème de Coloration de Graphe

    OpenAIRE

    Porumbel, Daniel Cosmin

    2009-01-01

    Au cours des trois dernières décennies, les algorithmes heuristiques ont permis de réaliser des progrès remarquables dans la résolution des problèmes difficiles d'optimisation combinatoire. Cependant, la conception de ces algorithmes relève encore plusieurs challenges importants - en particulier, il semble qu'il est toujours difficile d'intégrer dans une heuristique une vue d'ensemble sur l'évolution de la recherche ou sur sa trajectoire. Prenant comme cadre expérimental le problème bien conn...

  15. The Géocarbone-Monitoring Project: Main Results and Recommendations for Monitoring Deep Geological CO2 Storage in the Paris Basin Le projet de recherche Géocarbone-Monitoring : principaux résultats et recommandations pour le monitoring des stockages géologiques profonds de CO2 dans le bassin Parisien

    Directory of Open Access Journals (Sweden)

    Fabriol H.

    2010-07-01

    Full Text Available The aim of the Géocarbone-Monitoring research project was the evaluation and testing, as far as possible, of the different monitoring methods that might be applied in the specific context of the Paris Basin. Their main objectives are to: detect and map CO2 in the reservoir rocks; detect and quantify possible leaks between the reservoir and the surface. The partners developed several thoughts and research concerning the various monitoring methods. This enabled drawing up a critical overview of existing methods and proposing leads for further work. At the end of the project, recommendations were made for the stakeholders of CO2 storage, i.e. the government departments regulating storage, decision-makers, and future site operators. In addition, a proposal was made for the general design and implementation of a monitoring programme of an injection test in the Paris Basin, within a depleted reservoir or a deep aquifer. Le projet de recherche Géocarbone-Monitoring avait pour but principal d’évaluer et de tester, le cas échéant, les différentes méthodes de surveillance qui pourraient être appliquées au contexte géologique spécifique du Bassin Parisien. Les objectifs principaux de celles-ci sont de : détecter et cartographier le CO2 dans le réservoir ; détecter les fuites éventuelles entre le réservoir et la surface et être en mesure de les quantifier. Les recherches et les réflexions menées par les partenaires sur les méthodes de surveillance et de monitoring ont permis de dresser une vision critique des méthodologies existantes et de proposer des pistes de progrès. À l’issue du projet, des recommandations ont été rédigées à l’intention des parties prenantes du stockage de CO2 (administration chargée de mettre en oeuvre la réglementation des stockages, décideurs et futurs opérateurs de site et un schéma général pour la conception et la mise en oeuvre d’un programme de monitoring pour un test d’injection dans

  16. Magnetic, optical and relaxometric properties of organically coated gold-magnetite (Au-Fe{sub 3}O{sub 4}) hybrid nanoparticles for potential use in biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Umut, E., E-mail: eumut@hacettepe.edu.tr [Hacettepe University Physics Engineering Department, 06800 Beytepe-Ankara (Turkey); Pineider, F. [INSTM and Universita degli Studi di Firenze, Department of Chemistry, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); CNR-ISTM Padova, 35131 Padova (Italy); Arosio, P. [INSTM and Universita degli Studi di Milano, Department of Molecular Sciences Applied to Biosystems (DISMAB), I-20134 Milano (Italy); Sangregorio, C. [INSTM and Universita degli Studi di Firenze, Department of Chemistry, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); CNR-ISTM Milano, 50123 via C.Golgi 19, 20133 Milano (Italy); Corti, M. [INSTM, CNISM and Dipartimento di Fisica ' A.Volta' , Univ. di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Tabak, F. [Hacettepe University Physics Engineering Department, 06800 Beytepe-Ankara (Turkey); Lascialfari, A. [INSTM and Universita degli Studi di Milano, Department of Molecular Sciences Applied to Biosystems (DISMAB), I-20134 Milano (Italy); INSTM, CNISM and Dipartimento di Fisica ' A.Volta' , Univ. di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Ghigna, P. [INSTM and Dipartimento di Chimica Univ. di Pavia, v.le Taramelli 13, I-27100 Pavia (Italy)

    2012-08-15

    We present the magnetic, optical and relaxometric properties of multifunctional Au-Fe{sub 3}O{sub 4} hybrid nanoparticles (HNPs), as possible novel contrast agents (CAs) for magnetic resonance imaging (MRI). The HNPs have been synthesized by wet chemical methods in heterodimer and core-shell geometries and capped with oleylamine. Structural characterization of the samples have been made by X-ray diffraction and transmission electron microscopy, while magnetic properties have been investigated by means of Superconducting Quantum Interference Device-SQUID magnetometry experiments. As required for MRI applications using negative CAs, the samples resulted superparamagnetic at room temperature and well above their blocking temperatures. Optical properties have been investigated by analyzing the optical absorbtion spectra collected in UV-visible region. Relaxometric measurements have been performed on organic suspensions of HNPs and Nuclear Magnetic Resonance (NMR) dispersion curves have been obtained by measuring the longitudinal 1/T{sub 1} and transverse 1/T{sub 2} relaxation rates of solvent protons in the range 10 kHz/300 MHz at room temperature. NMR relaxivities r{sub 1} and r{sub 2} have been compared with ENDOREM{sup Registered-Sign }, one of the commercial superparamagnetic iron oxide based MRI contrast agents. MRI contrast enhancement efficiencies have been investigated also by examining T{sub 2}-weighted MR images of suspensions. The experimental results suggest that the nanoparticles' suspensions are good candidates as negative CAs. - Highlights: Black-Right-Pointing-Pointer Au-Fe{sub 3}O{sub 4} superparamagnetic Hybrid NanoPrticles (HNPs) enhance contrast in MRI. Black-Right-Pointing-Pointer HNPs are expected to have optical activities through observed SPR phenomena. Black-Right-Pointing-Pointer HNPs have relatively high magnetic anisotropy originating from Au/Fe{sub 3}O{sub 4} interface. Black-Right-Pointing-Pointer Magnetic dipolar interactions have

  17. Transformation, Conversion, Stockage, Transport de l'énergie thermique par procédés thermochimiques et thermo-hydrauliques

    OpenAIRE

    Stitou, Driss

    2013-01-01

    Les travaux de recherche présentés visent, de manière générale, à répondre aux enjeux majeurs de gestion rationnelle et de maîtrise de l'énergie (transport et stockage de l'énergie thermique), à développer des solutions pertinentes et proposer des outils d'analyse thermodynamique pour la minimisation des impacts environnementaux induits par la transformation ou la conversion de l'énergie thermique. Les différentes thématiques développées s'articulent selon trois axes. Le premier volet concern...

  18. Application of Au-Sn eutectic bonding in hermetic radio-frequency microelectromechanical system wafer level packaging

    Science.gov (United States)

    Wang, Qian; Choa, Sung-Hoon; Kim, Woonbae; Hwang, Junsik; Ham, Sukjin; Moon, Changyoul

    2006-03-01

    Development of packaging is one of the critical issues toward realizing commercialization of radio-frequency-microelectromechanical system (RF-MEMS) devices. The RF-MEMS package should be designed to have small size, hermetic protection, good RF performance, and high reliability. In addition, packaging should be conducted at sufficiently low temperature. In this paper, a low-temperature hermetic wafer level packaging scheme for the RF-MEMS devices is presented. For hermetic sealing, Au-Sn eutectic bonding technology at temperatures below 300°C is used. Au-Sn multilayer metallization with a square loop of 70 µm in width is performed. The electrical feed-through is achieved by the vertical through-hole via filling with electroplated Cu. The size of the MEMS package is 1 mm × 1 mm × 700 µm. The shear strength and hermeticity of the package satisfies the requirements of MIL-STD-883F. Any organic gases or contamination are not observed inside the package. The total insertion loss for the packaging is 0.075 dB at 2 GHz. Furthermore, the robustness of the package is demonstrated by observing no performance degradation and physical damage of the package after several reliability tests.

  19. Application of X-ray photoelectron spectroscopy to characterization of Au nanoparticles formed by ion implantation into SiO2

    International Nuclear Information System (INIS)

    In X-ray photoelectron spectroscopy (XPS) of Au nanoparticles, the width of 5d valence band changes with Au particle size. This enables us to estimate the size of Au nanoparticles by using XPS. In this work, the 5d-band width has been measured for Au nanoparticles formed by ion implantation into SiO2. The 5d-band width is found to be correlated strongly with the Au concentration. As the Au concentration increases, the 5d-band width becomes larger, indicating that the Au nanoparticles with the larger size tend to be formed in the vicinity of the projected range of Au ions. This correlation agrees very well with the results from transmission electron microscopy.

  20. Thermohydraulique des écoulements d'hélium faiblement supercritique en conduite application au refroidissement des écrans de faisceau du LHC

    CERN Document Server

    Hatchadourian, E

    2000-01-01

    Au cours d'observations, au-delà de la mise en évidence d'un effet inattendu, l'effort de compréhension porte tout d'abord vers une description qualitative du phénomène et ensuite quantitative. Puis, lorsque ce phénomène est compris, le travail peut s'orienter vers une étape d'exploitation o le mécanisme est utilisé pour développer de nouvelles voies de recherche ou encore apporter des solutions à des besoins d'ordre technologique. L'étude établie sur le projet du futur collisionneur de particules du CERN en est un exemple convaincant : il s'agit dans un premier temps de définir un modèle simplifié sur l'écoulement d'hélium supercritique dans des tubes soumis à des apports de chaleur, afin de permettre la compréhension des mécanismes essentiels puis developper un modèle plus précis, mais également plus complet, pour l'étude quantitative. L'application directe de cette étude thermohydraulique concerne le refroidissement des écrans de faisceau du LHC. Ces écrans, maintenus à une te...

  1. Spectral Matrix Filtering Applied to Vsp Processing Application du filtrage matriciel au traitement des profils sismiques verticaux

    Directory of Open Access Journals (Sweden)

    Glangeaud F.

    2006-11-01

    données et de séparer ces signaux. Nous montrons que les signaux peuvent être automatiquement séparés sans connaissance a priori sur leurs vitesses apparentes, en fonction du produit scalaire (calculé dans le domaine fréquentiel et de l'amplitude relative des signaux. Nous montrons des exemples d'application sur des données de sismique de puits. Le filtrage matriciel est effectué dans le domaine fréquentiel en utilisant la matrice spectrale construite à l'aide des intercorrélations des différents enregistrements constituant les données à traiter. Les méthodes d'estimation de la matrice spectrale sont des méthodes de moyenne : moyenne en fréquence (méthode du périodogramme lissé et/ou moyenne en distance (lissage réalisé le long des diagonales de la matrice spectrale. Le lissage en fréquence est obtenu par l'intermédiaire d'une fonction de pondération (par exemple fenêtre de Hanning élevée à une puissance donnée appliquée à chaque corrélation. Les moyennes sont utilisées pour décorréler les signaux et de ce fait favoriser la séparation. Une fois correctement estimée, la matrice spectrale est diagonalisée sur toutes les fréquences du spectre moyenné, et décomposée selon ses vecteurs propres qui sont orthogonaux entre eux et normalisés. Chaque vecteur propre a une valeur propre associée qui représente la répartition d'énergie en fonction de la fréquence du modèle lié au vecteur propre. Le filtrage est réalisé par projection des données sur les différents vecteurs propres issus de la matrice spectrale. Il est à noter cependant que la séparation des différents signaux (projection sur vecteur propre n'est réalisée en terme d'indicatrice sismique que si les événements sismiques sont naturellement orthogonaux et alignés sur les vecteurs propres. Glangeaud et al (1989 ont étudié l'influence des amplitudes relatives et du produit scalaire de deux ondes. Si la vitesse apparente d'une onde est connue, cette derni

  2. From chemical mapping to pressure temperature deformation micro-cartography: mineralogical evolution and mass transport in thermo-mechanic disequilibrium systems: application to meta-pelites and confinement nuclear waste materials; De l'imagerie chimique a la micro-cartographie Pression-Temperature-Deformation: evolution mineralogique et transport de matiere dans des systemes en desequilibre thermomecanique. Applications aux metapelites et aux materiaux de stockage de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, V. de

    2006-03-15

    The mineralogical composition of metamorphic rocks or industrial materials evolves when they are submitted to thermomechanical disequilibria, i.e. a spatial or temporal pressure and temperature evolution, or chemical disequilibria as variations in redox conditions, pH... For example, during low temperature metamorphic processes, rocks re-equilibrate only partially, and thus record locally thermodynamic equilibria increasing so the spatial chemical heterogeneities. Understanding the P-T evolution of such systems and deciphering modalities of their mineralogical transformation imply to recognize and characterize the size of these local 'paleo-equilibria', and so to have a spatial chemical information at least in 2 dimensions. In order to get this information, microprobe X-ray fluorescence maps have been used. Computer codes have been developed with Matlab to quantify these maps in view of thermo-barometric estimations. In this way, P-T maps of mineral crystallisation were produced using the multi-equilibria thermodynamic technique. Applications on two meta-pelites from the Sambagawa blue-schist belt (Japan) and from the Caledonian eclogitic zone in Spitsbergen, show that quantitative chemical maps are a powerful tool to retrieve the metamorphic history of rocks. From these chemical maps have been derived maps of P-T-time-redox-deformation that allow to characterize P-T conditions of minerals formation, and so, the P-T path of the sample, the oxidation state of iron in the chlorite phase. As a result, we underline the relation between deformation and crystallisation, and propose a relative chronology of minerals crystallisation and deformations. The Fe{sup 3+} content map in chlorite calculated by thermodynamic has also been validated by a {mu}-XANES mapping at the iron K-edge measured at the ESRF (ID24) using an innovative method. Another application relates to an experimental study of clay materials, main components of an analogical model of a nuclear

  3. Nanoscaled redox active protein adsorption on Au-dot arrays: An electrochemical scanning probe microscopic investigation for application in nano-biodevices

    Energy Technology Data Exchange (ETDEWEB)

    Yagati, Ajay Kumar; Jung, Mi; Kim, Sang-Uk [Interdisciplinary Program of Integrated Biotechnology, Sogang University, 1 Shinsu-dong, Mapo-gu, Seoul 121-742 (Korea, Republic of); Min, Junhong [College of Bionanotechnology, Kyungwon University, Bokjung-dong, Sujung-gu, Seongnam 461-701 (Korea, Republic of); Choi, Jeong-Woo, E-mail: jwchoi@sogang.ac.k [Interdisciplinary Program of Integrated Biotechnology, Sogang University, 1 Shinsu-dong, Mapo-gu, Seoul 121-742 (Korea, Republic of); Department of Chemical and Biomolecular Engineering, Interdisciplinary Program of Integrated Biotechnology Sogang University, 1 Shinsu-dong, Mapo-gu, Seoul 121-742 (Korea, Republic of)

    2009-11-30

    Highly dense and uniform protein dot arrays on Au-nanodots using size controllable method were fabricated on indium tin oxide (ITO) substrate in order to develop an electrochemical nanobiochip. Cysteine modified azurin was directly immobilized on the fabricated Au-nanodots without any linker materials. Atomic force microscopy was used for characterizing Au-dots formed on ITO substrate. Electrochemical scanning tunneling microscopy (ECSTM) revealed the monolayer formation with an in situ cyclic voltammetry to observe redox behaviour of both bare Au-dots and protein immobilized Au-dots. I-V characteristics were obtained on both bare Au-dots and protein immobilized Au-dots structured on ITO conductive electrodes.

  4. Repérage et typage d'expressions temporelles pour l'annotation sémantique automatique de pages Web - Application au e-tourisme

    OpenAIRE

    Weiser, Stéphanie

    2010-01-01

    Cette thèse présente Adetoa, système dédié au repérage et à l'annotation sémantique automatique d'expressions temporelles dans des pages Web pour une application de e-tourisme. Une étude linguistique détaillée a permis de mettre en avant les caractéristiques et la complexité de l'expression de la temporalité dans les pages Web touristiques. Une étude sémiotique de ce type de pages a montré que les données y étaient organisées de manière fort variée, ne présentant aucune régularité, ce qui ren...

  5. L’énergie : stockage électrochimique et développement durable

    OpenAIRE

    Tarascon, Jean-Marie

    2013-01-01

    Monsieur l’Administrateur,Chers collègues et confrères, chers amis,Mesdames et Messieurs, Bien qu’averti par tous mes collègues, je réalise que donner sa leçon inaugurale au Collège de France génère plus d’émotions que je ne le pensais. Permettez-moi cependant, M. l’Administrateur et mes chers collègues, de vous remercier pour m’avoir fait l’honneur de tenir la chaire annuelle Développement durable – Environnement, énergie et société, soutenue par le groupe Total que je remercie également. Le...

  6. Strain distributions of confined Au/Ag and Ag/Au nanoparticles

    Institute of Scientific and Technical Information of China (English)

    黄红华; 章英; 刘晓山; 骆兴芳; 袁彩雷; 叶双莉

    2015-01-01

    The strain distributions of Au/Ag and Ag/Au nanoparticles confined in the Al2O3 matrix with different core sizes are investigated by using the finite element method, respectively. The simulation results clearly indicate that the compressive strains exerted on the Au/Ag and Ag/Au nanoparticles can be induced by the Al2O3 matrix. Moreover, it can be found that the strain gradient existing in a Au/Ag nanoparticle is much larger than that in a Ag/Au nanoparticle, which could be due to the larger Young’s modulus of Au than that of Ag. With the core size increasing, the strain gradient existing in the Au/Ag nanoparticle becomes larger, while the strain gradient existing in the Ag/Au nanoparticle keeps constant. These different strain distributions may have significant infl uences on the structures and morphologies of the Au/Ag and Ag/Au nanoparticles, leading to the different physical properties for potential applications.

  7. Au/Sn共晶键合技术在MEMS封装中的应用%Application of the Au/Sn Eutectic Bonding Technology in the Packaging of MEMS

    Institute of Scientific and Technical Information of China (English)

    胥超; 徐永青; 杨拥军; 杨志

    2014-01-01

    研究了Au/Sn共晶圆片键合技术在MEMS气密性封装中的应用.设计了共晶键合多层材料的结构和密封环图形,盖帽层采用Ti/Ni/Au/Sn/Au结构,器件层采用Ti/Ni/Au结构,盖帽层腔体尺寸为4.5mm×4.5 mm×20 μm,Au/Sn环的宽度为700 μm,优化了键合工艺,对影响气密性的因素(如组分配比、键合前处理和键合温度等)进行了分析.两层硅片在氮气气氛中靠静态的压力实现紧密接触.在峰值温度为300℃、持续时间为2 min的条件下实现了良好的键合效果,其剪切力平均值达到16.663 kg,漏率小于2×10-3 Pa·cm3/s,满足检验标准(GJB548A)的要求,验证了Au/Sn共晶键合技术在MEMS气密封装中的适用性.

  8. Electrogenerated Chemiluminescence Behavior of Au nanoparticles-hybridized Pb (II) metal-organic framework and its application in selective sensing hexavalent chromium

    OpenAIRE

    Hongmin Ma; Xiaojian Li; Tao Yan; Yan Li; Haiyang Liu; Yong Zhang; Dan Wu; Bin Du; Qin Wei

    2016-01-01

    In this work, a novel electrochemiluminescence (ECL) sensor based on Au nanoparticles-hybridized Pb (II)-β-cyclodextrin (Pb-β-CD) metal-organic framework for detecting hexavalent chromium (Cr(VI)) was developed. Pb-β-CD shows excellent ECL behavior and unexpected reducing ability towards Au ions. Au nanoparticles could massively form on the surface of Pb-β-CD (Au@Pb-β-CD) without use of any additional reducing agent. In the presence of coreactant K2S2O8, the ECL emission of Pb-β-CD was enhanc...

  9. Time evolution of relativistic d + Au and Au + Au collisions

    CERN Document Server

    Wolschin, G; Mizoguchi, T; Suzuki, N; Biyajima, Minoru; Mizoguchi, Takuya; Suzuki, Naomichi; Wolschin, Georg

    2006-01-01

    The evolution of charged-particle production in collisions of heavy ions at relativistic energies is investigated as function of centrality in a nonequilibrium-statistical framework. Precise agreement with recent d + Au and Au + Au data at sqrt(s_NN) = 200 GeV is found in a Relativistic Diffusion Model with three sources for particle production. Only the midrapidity source comes very close to local equilibrium, whereas the analyses of the overall pseudorapidity distributions show that the systems remain far from statistical equilibrium.

  10. Self-assembly of thiolated cyanine aggregates on Au(111) and Au nanoparticle surfaces

    Science.gov (United States)

    Menéndez, Guillermo O.; Cortés, Emiliano; Grumelli, Doris; Méndez de Leo, Lucila P.; Williams, Federico J.; Tognalli, Nicolás G.; Fainstein, Alejandro; Vela, María Elena; Jares-Erijman, Elizabeth A.; Salvarezza, Roberto C.

    2012-01-01

    Heptamethinecyanine J-aggregates display sharp, intense fluorescence emission making them attractive candidates for developing a variety of chem-bio-sensing applications. They have been immobilized on planar thiol-covered Au surfaces and thiol-capped Au nanoparticles by weak molecular interactions. In this work the self-assembly of novel thiolated cyanine (CNN) on Au(111) and citrate-capped AuNPs from solutions containing monomers and J-aggregates has been studied by using STM, XPS, PM-IRRAS, electrochemical techniques and Raman spectroscopy. Data show that CNN species adsorb on the Au surfaces by forming thiolate-Au bonds. We found that the J-aggregates are preferentially adsorbed on the Au(111) surface directly from the solution while adsorbed CNN monomers cannot organize into aggregates on the substrate surface. These results indicate that the CNN-Au interaction is not able to disorganize the large J-aggregates stabilized by π-π stacking to optimize the S-Au binding site but it is strong enough to hinder the π-π stacking when CNNs are chemisorbed as monomers. The optical properties of the J-aggregates remain active after adsorption. The possibility of covalently bonding CNN J-aggregates to Au planar surfaces and Au nanoparticles controlling the J-aggregate/Au distance opens a new path regarding their improved stability and the wide range of biological applications of both CNN and AuNP biocompatible systems.Heptamethinecyanine J-aggregates display sharp, intense fluorescence emission making them attractive candidates for developing a variety of chem-bio-sensing applications. They have been immobilized on planar thiol-covered Au surfaces and thiol-capped Au nanoparticles by weak molecular interactions. In this work the self-assembly of novel thiolated cyanine (CNN) on Au(111) and citrate-capped AuNPs from solutions containing monomers and J-aggregates has been studied by using STM, XPS, PM-IRRAS, electrochemical techniques and Raman spectroscopy. Data show

  11. First principles calculations of the optical and plasmonic response of Au alloys and intermetallic compounds.

    Science.gov (United States)

    Keast, V J; Barnett, R L; Cortie, M B

    2014-07-30

    Pure Au is widely used in plasmonic applications even though its use is compromised by significant losses due to damping. There are some elements that are less lossy than Au (e.g. Ag or Al) but they will normally oxidize or corrode under ambient conditions. Here we examine whether alloying Au with a second element would be beneficial for plasmonic applications. In order to evaluate potential alternatives to pure Au, the density of states (DOS), dielectric function and plasmon quality factor have been calculated for alloys and compounds of Au with Al, Cd, Mg, Pd, Pt, Sn, Ti, Zn and Zr. Substitutional alloying of Au with Al, Cd, Mg and Zn was found to slightly improve the plasmonic response. Of the large number of intermetallic compounds studied, only AuAl2, Au3Cd, AuMg, AuCd and AuZn were found to be suitable for plasmonic applications. PMID:25001413

  12. Transport de particules massives dans un fluide turbulent: Application a l'erosion due au sable sur les parois d'une turbine hydraulique

    Science.gov (United States)

    Bergeron, Stephen

    Le transport de particules massives par un champ turbulent est un vaste domaine de la mécanique des fluides. Il possède de nombreuses applications comme par exemple le transport de sable dans une turbine hydraulique. En raison de la dureté des grains de quartz et des grandes vitesses de collision avec les parois métalliques, un phénomène d'érosion intensif se produit. Les dommages résultants peuvent diminuer le rendement de la turbine au cours des quelques mois suivant la mise en opération. L'objectif de cette thèse est de mettre au point un outil permettant de prédire ces zones d'érosion. Ce projet de recherche en contexte industriel a été réalisé en collaboration avec la compagnie General Electric Hydro du Canada. Dans un régime hautement turbulent, il est possible d'obtenir une expression suffisamment générale en utilisant une formulation partiellement empirique: l'équation de Basset- Boussinesq-Oseen modifiée. Ce choix de modèle tient compte du niveau de précision recherché et de la méthode numérique employée afin de résoudre la phase fluide. Il permet aussi d'éliminer plusieurs ambiguïtés fréquemment rencontrées dans la littérature et implementées dans certains codes commerciaux courants. La formulation mathématique du problème est effectuée dans un espace mixte Euler-Lagrange. Les paramètres dynamiques sont relies au type de particules et à l'intensité de la turbulence. Le code numérique résultant est le plus performant développé à ce jour (août 1998). Les trajectoires de plusieurs centaines de milliers de particules peuvent être simulées et visualisées de manière interactive sur une station de travail (SGI R4K, R8K et R10K). L'utilisateur du logiciel est libre de se déplacer dans l'espace à l'aide d'un environnement similaire a un ``simulateur de vol''. Il peut ainsi analyser les détails du processus d'érosion de même que l'écoulement du fluide dans la turbine. Les zones d'érosion obtenues à l

  13. Fabrication of macroporous Pt and PtAu electrodes for electrochemical application through galvanic replacement at macroporous Cu electrode electrodeposited at polystyrene template from room temperature ionic liquid

    International Nuclear Information System (INIS)

    Highlights: ► Macroporous Pt and PtAu electrodes were prepared through galvanic replacement. ► Galvanic replacement occurred at macroporous Cu electrodes in aqueous solutions. ► Macroporous Cu electrodes were electrodeposited from ionic liquid at PS template. ► Surfactant played an important role on the formation of macroporous structures. ► Macroporous PtAu revealed good electrocatalytic activity to ethanol oxidation. -- Abstract: Macroporous Pt and PtAu electrodes (MP-Pt and MP-PtAu) were prepared through galvanic replacement at macroporous Cu electrodes, which were formed by electrodeposition of Cu at Au-coated indium tin oxide (Au/ITO) electrodes covered with ordered arrays of polystyrene (PS) nanospheres (PS/Au/ITO) in N-butyl-N-methylpyrrolidinium dicyanamide room temperature ionic liquid (BMP-DCA RTIL). After dissolving the PS templates in tetrahydrofuran (THF), macroporous Cu electrodes (MP-Cu/Au/ITO; denoted as MP-Cu hereafter) were obtained. The surface of a MP-Cu was spontaneously replaced by Pt or Pt/Au when a MP-Cu was immersed in an aqueous solution containing H2PtCl6 or H2PtCl6/HAuCl4 to form the MP-Pt (actually, MP-Pt/Cu/Au/ITO) or MP-PtAu electrodes. The atomic ratios of Au in PtAu could be adjusted by changing the concentration of HAuCl4 in the mixtures of H2PtCl6/HAuCl4. The electrodeposition potential, the time of replacement reaction, the concentrations of H2PtCl6 and HAuCl4, and the content of surfactant, which influence the structure of macroporous electrodes, were investigated. The surface morphologies of these macroporous electrodes were characterized with scanning electron microscope (SEM). MP-PtAu electrodes showed the better performance than the MP-Pt electrodes on the electrocatalytic oxidation of ethanol in alkaline solutions

  14. Méthode de vieillissement accéléré au dioxyde de chlore : application au polyamide 66 non stabilisé et non chargé

    OpenAIRE

    Dauseins, J.; El Mazry, Chaker; Mallet, J; Colin, Xavier; CORREC, Olivier

    2014-01-01

    Dans l'objectif d'étudier à long terme des accessoires utilisés dans les réseaux intérieurs d'eau, le Centre scientifique et technique du bâtiment (CSTB) a mis au point un banc d'essai de vieillissement accéléré au dioxyde de chlore sur sa plateforme expérimentale Aquasim. Les premières études réalisées avec le banc montrent que ce désinfectant de l'eau potable attaque aussi les matériaux polymères. Initialement utilisé pour détruire les micro-organismes, il n'est pas totalement sélectif puis...

  15. Contribution à l'élaboration d'un guide de bonnes pratiques de la gestion des ressources humaines au sein des structures vétérinaires : application au personnel non vétérinaire

    OpenAIRE

    Debeaupuits, Julien

    2014-01-01

    La réussite d'un vétérinaire ne passe plus seulement par ses compétences scientifiques, il doit aussi gérer ses capitaux, son personnel, ...Le vétérinaire est un véritable entrepreneur. Le nombre de salariés non vétérinaires au sein des structures vétérinaires augmente au fil des années. De nombreuses études démontrent l'importance d'une bonne gestion des ressources humaines. Même si ces notions sont parmi les plus dificiles à gérer pour le clinicien, la réussite de cette partie du management...

  16. Safety guidebook relative to the disposal of radioactive wastes in deep geologic formation; Guide de surete relatif au stockage definitif des dechets radioactifs en formation geologique profonde

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The French nuclear safety authority (ASN) initiated in 2003 a revision process of the objectives to be considered during the research and work steps of the implementation of a radioactive waste storage facility in deep geologic formations. The purpose of this document is to define the safety objectives that have to be retained at each step of this implementation, from the site characterization to the closure of the facility. This update takes into account the works carried out by the ANDRA (French national agency of radioactive wastes) in the framework of the law from December 30, 1991, and the advices of the permanent experts group about these works. It takes also into consideration the international research works in this domain and the choices defined in the program law no 2006-739 from June 28, 2006 relative to the sustainable management of radioactive materials and wastes. The main modifications concern: the notion of reversibility, the definition of the safety functions of disposal components, the safety goals and the design principles assigned to waste packages, the control of nuclear materials and the monitoring objectives of the facility. The documents treats of the following points: 1 - the objectives of public health and environment protection; 2 - the safety principles and the safety-related design bases of the facility; and 3 - the method used for demonstrating the disposal safety. (J.S.)

  17. Suivi, modélisation et évolution des processus d'injections magmatiques au Piton de La Fournaise (Réunion), à partir d'une analyse croisée des données de déformation, géochimiques et structurales

    OpenAIRE

    Peltier, Aline

    2007-01-01

    Un des enjeux de la volcanologie réside dans la compréhension du fonctionnement du système de stockage et de transferts magmatiques associés aux éruptions. Au Piton de La Fournaise, cette étude est ici abordée par une analyse croisée des déformations, couplée à des modélisations numériques, et aux données géochimiques de la période 1998-2007. Au sein de cette activité, nous définissons, depuis 2000, un caractère cyclique ; chaque cycle est défini par une séquence d'éruptions sommitales et lat...

  18. Suivi, modélisation et évolution des processus d'injections magmatiques au Piton de La Fournaise (Réunion) à partir d'une analyse croisée des données de déformation, géochimiques et structurales

    OpenAIRE

    Peltier, Aline

    2007-01-01

    Un des enjeux de la volcanologie réside dans la compréhension du fonctionnement du système de stockage et de transferts magmatiques associés aux éruptions. Au Piton de La Fournaise, cette étude est ici abordée par une analyse croisée des déformations, couplée à des modélisations numériques, et aux données géochimiques de la période 1998-2007. Au sein de cette activité, nous définissons, depuis 2000, un caractère cyclique ; chaque cycle est défini par une séquence d'éruptions sommitales et lat...

  19. A comparative study of Ge/Au/Ni/Au-based ohmic contact on graphene

    International Nuclear Information System (INIS)

    Superior graphene—metal contacts can improve the performance of graphene devices. We report on an experimental demonstration of Ge/Au/Ni/Au-based ohmic contact on graphene. The transfer length method (TLM) is adopted to measure the resistivity of graphene-metal contacts. We designed a process flow, which can avoid residual photoresist at the interface of metal and graphene. Additionally, rapid thermal annealing (RTA) at different temperatures as a post-processing method is studied to improve graphene—metal contact. The results reveal that the contact resistivity of graphene and Ge/Au/Ni/Au can reach 10−5 Ω·cm2 after RTA, and that 350 °C is optimum annealing temperature for the contact of graphene—Ge/Au/Ni/Au. This paper provides guidance for fabrication and applications of graphene devices. (semiconductor technology)

  20. Synthesis and characterization of Au-alumina nanocomposites prepared by atom beam co-sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, Manisha; Annapoorni, S. [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Agarwal, D.C.; Avasthi, D.K. [Inter University Accelerator Centre, P.O. Box 10502, New Delhi 110067 (India); Mohapatra, S. [School of Basic and Applied Sciences, Guru Gobind Singh Indraprastha University, Dwarka, New Delhi 110075 (India); Pivin, J.C. [CSNSM, IN2P3-CNRS, Batiment 108, 1405 Orsay Campus (France)

    2012-12-15

    Nanocomposite thin films of Au-alumina with varying Au contents were synthesized by atom beam co-sputtering. The Au content and the thickness of nanocomposite films were determined by Rutherford backscattering spectrometry. Transmission electron microscopy studies reveal the presence of Au nanoparticles with bimodal size distribution in nanocomposites for lower Au content. Overlapping Au nanoparticles were observed for higher Au content. The increase in size of Au nanocrystals is observed with increase in Au concentration as also evident by glancing angle X-ray diffraction studies. Ultraviolet (UV)-visible absorption studies revealed surface plasmon resonance (SPR) peak which showed a red shift from 519 to 602 nm with increasing Au content of the nanocomposites. Preliminary study exploring the interaction between Au nanoparticles in the nanocomposites and bovine serum albumin (BSA) showed the Au nanoparticles to be BSA sensitive, indicating their possible applications in biosensors. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  1. Pour le stockage de l'hydrogène : Analyse thermodynamique de la formation d'hydrures métalliques et optimisation du remplissage d'un réservoir.

    OpenAIRE

    Gondor, Germain

    2008-01-01

    Les travaux de thèse s'inscrivent dans le cadre du stockage d'hydrogène dans des hydrures métalliques. Plusieurs voies de stockage d'hydrogène existent. Afin de sécuriser des réservoirs gazeux sous haute pression (700 bar), une couche de composé intermétallique est insérée entre l'enveloppe interne d'aluminium (barrière physique pour l'hydrogène) et la matrice composite (pour la tenue mécanique du réservoir). En cas fissure de la couche d'aluminium, le composé métallique agit comme une éponge...

  2. Brine/CO2 Interfacial Properties and Effects on CO2 Storage in Deep Saline Aquifers Propriétés interfaciales saumure/CO2 et effets sur le stockage du CO2 dans des aquifères salins profonds

    Directory of Open Access Journals (Sweden)

    Chalbaud C.

    2010-05-01

    Full Text Available It has been long recognized that interfacial interactions (interfacial tension, wettability, capillarity and interfacial mass transfer govern fluid distribution and behaviour in porous media. Therefore the interfacial interactions between CO2, brine and reservoir oil and/or gas have an important influence on the effectiveness of any CO2 storage operation. There is a lack of experimental data related to interfacial properties for all the geological storage options (oil & gas reservoirs, coalbeds, deep saline aquifers. In the case of deep saline aquifers, there is a gap in data and knowledge of brine-CO2 interfacial properties at storage conditions. More specifically, experimental interfacial tension values and experimental tests in porous media are necessary to better understand the wettability evolution as a function of thermodynamic conditions and it’s effects on fluid flow in the porous media. In this paper, a complete set of experimental values of brine-CO2 Interfaciale Tension (IFT at pressure, temperature and salt concentration conditions representative of those of a CO2 storage operation. A correlation is derived from experimental data published in a companion paper [Chalbaud C., Robin M., Lombard J.-M., Egermann P., Bertin H. (2009 Interfacial Tension Measurements and Wettability Evaluation for Geological CO2 Storage, Adv. Water Resour. 32, 1, 1-109] to model IFT values. This paper pays particular attention to coreflooding experiments showing that the CO2 partially wets the surface in a Intermediate-Wet (IW or Oil-Wet (OW limestone rock. This wetting behavior of CO2 is coherent with observations at the pore scale in glass micromodels and presents a negative impact on the storage capacity of a given site. Il est admis depuis longtemps que les propriétés interfaciales (tension interfaciale, mouillabilité, capillarité et transfert de masse régissent la distribution et le comportement des fluides au sein des milieux poreux. Par cons

  3. Etude d’une installation de production et stockage d’hydrogène photovoltaïque : maison Friedli à Zollbrück, Suisse

    OpenAIRE

    Hollmuller, Pierre; Joubert, Jean-Marc Eric; Lachal, Bernard Marie; Yvon, Klaus

    1999-01-01

    Nous présentons l’analyse d’une installation d’hydrogène photovoltaïque (production et stockage) implantée sur une maison résidentielle. Description de l’installation (Sec. 2) et charactérisation des sous-systèmes (Sec. 3) sont accompagnés d’une série de mesure in-situ sur quelques jours d’été (Sec. 4). Les résultats principaux sont résumés sur un diagramme entrée/sortie reliant synoptiquement les étapes successives de la production à l’ensoleillement instantanné (Sec. 5) et permettent d’éval...

  4. Cellules photo-électrochimiques à électrodes semiconductrices pour la conversion et le stockage de l'énergie solaire

    OpenAIRE

    Horowitz, G.; Bourrasse, A.

    1980-01-01

    Discipline récente, la conversion photo-électrochimique (PEC) de l'énergie solaire a connu ces dernières années un important effort de recherche. Les cellules PEC se caractérisent par la présence d'électrodes semiconductrices. L'étude théorique de leur fonctionnement, et en particulier de la stabilité des électrodes semiconductrices, conduit à distinguer deux types de cellules : les cellules autorégénérées, fournissant de l'énergie électrique, et les cellules de stockage, permettant la généra...

  5. Modelisation et commande des redresseurs triphases fonctionnant a haut rendement et a faible taux de distorsion harmonique: Application au redresseur triphase de vienne

    Science.gov (United States)

    Belhadj Youssef, Nesrine

    Les problemes de la qualite de l'onde electrique constituent l'une des preoccupations majeures des fournisseurs de l'energie et des organismes specialises en qualite d'energie. Ce sujet a gagne davantage d'ampleur avec l'utilisation ascendante des convertisseurs de l'energie electrique dans la majorite des applications industrielles et domestiques. Dans le cadre de cette these, on s'interesse plus particulierement au type des convertisseurs alternatif/continu, dont le fonctionnement adequat implique la parfaite regulation du bus DC de tension, l'attenuation des harmoniques de courants, la compensation de l'energie reactive et la maximisation du rendement energetique. Ces differents criteres doivent etre maintenus pour diverses conditions de fonctionnement, c'est-a-dire independamment des variations parametriques auxquelles le systeme peut etre sujet. Il s'avere donc indispensable d'adopter des techniques de commande efficaces, ce qui passe par une modelisation correcte du convertisseur. L'optimisation du nombre de capteurs dans le circuit est egalement un facteur cle a prendre en consideration.

  6. CONCEPTION-ET-MODELISATION-D’UN-MICROLEVIER-PIEZORESISTI- APPLICATION-AU-MICROSCOPE-A-FORCE-ATOMIQUE-inistère

    OpenAIRE

    MEDJAHDI, Nadjia

    2014-01-01

    Dans le cadre de ce mémoire, nous avons modélisé le comportement du microlevier piézorésistif, nous avons étudié une de ces applications : c’est le microscope à force atomique. Enfin, nous nous sommes attachés à concevoir un microlevier piézorésistif pouvant servir de produit consommable pour l’AFM. Dans le premier chapitre, nous avons rappelé quelques notions de base sur les microsystèmes. Nous avons aussi donné les principaux types de microsystèmes à savoir les microcapteu...

  7. Preparation of Au Nanoparticles Immobilized Cross-Linked Poly(4-vinylpyridine) Nanofibers and Their Catalytic Application for the Reduction of 4-Nitrophenol.

    Science.gov (United States)

    Qin, Qi-Hu; Na, Hui; Zhang, Chunyu; Yu, Qizhou; Zhang, Xue-Quan; Zhang, He-Xin

    2015-05-01

    Catalytic nanofibers are prepared by the immobilization of Au nanoparticles (AuNPs) onto the surface of cross-linked electrospun poly(4-vinylpyridine) (P4VP) nanofibers. The crosslinking of the P4VP nanofibers by 1,4-diiodobutane via quaternization reaction greatly enhances the stability of the nanofibers against the solvent dissolution, which can then be used as promising platform for the immobilization of catalytic metal nanoparticles. The AuNPs immobilized cross-linked P4VP nanofibers have shown a good catalytic activity for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). PMID:26505022

  8. Au-Loaded Titanium Dioxide Nanoparticles Synthesized by Modified Sol-Gel/Impregnation Methods and Their Application to Dye-Sensitized Solar Cells

    OpenAIRE

    Hathaithip Ninsonti; Weerasak Chomkitichai; Akira Baba; Natda Wetchakun; Wiyong Kangwansupamonkon; Sukon Phanichphant; Kazunari Shinbo; Keizo Kato; Futao Kaneko

    2014-01-01

    Au-loaded TiO2 nanoparticles were synthesized by the modified sol-gel method together with the impregnation method. Anatase phase of TiO2 was obtained in all samples with an average particle size of 20 nm. For the enhancement of DSSCs, the dye-sensitized solar cells composed of the ITO/Au-loaded TiO2/N-719/electrolyte/Pt were fabricated. Au-loaded TiO2 films were deposited by using squeegee method. Finally, the fabricated cells were studied upon an irradiation of solar light to study the perf...

  9. Facile synthesis and intraparticle self-catalytic oxidation of dextran-coated hollow Au-Ag nanoshell and its application for chemo-thermotherapy.

    Science.gov (United States)

    Jang, Hongje; Kim, Young-Kwan; Huh, Hyun; Min, Dal-Hee

    2014-01-28

    Galvanic replacement reaction is a useful method to prepare various hollow nanostructures. We developed fast and facile preparation of biocompatible and structurally robust hollow Au-Ag nanostructures by using dextran-coated Ag nanoparticles. Oxidation of the surface dextran alcohols was enabled by catalytic activity of the core Au-Ag nanostructure, introducing carbonyl groups that are useful for further bioconjugation. Subsequent doxorubicin (Dox) conjugation via Schiff base formation was achieved, giving high payload of approximately 35 000 Dox per particle. Near-infrared-mediated photothermal conversion showed high efficacy of the Dox-loaded Au-Ag nanoshell as a combinational chemo-thermotherapy to treat cancer cells. PMID:24383549

  10. Détection d'intrusions comportementale par diversification de COTS : application au cas des serveurs web

    OpenAIRE

    Majorczyk, Frédéric

    2008-01-01

    version non-définitive de la thèse, présentée lors de la soutenance. L'informatique et en particulier l'Internet jouent un rôle grandissant dans notre société. Un grand nombre d'applications critiques d'un point de vue de leur sécurité sont déployées dans divers domaines comme le domaine militaire, la santé, le commerce électronique, etc. La sécurité des systèmes informatiques devient alors une problématique essentielle tant pour les individus que pour les entreprises ou les états. Il est ...

  11. Ultra-relativistic Au+Au and d+Au collisions:

    Science.gov (United States)

    Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Hauer, M.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Seals, H.; Sedykh, I.; Skulski, W.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Veres, G. I.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    In this talk I will review PHOBOS data on charged particle multiplicities, obtained in Au+Au and d+Au collisions at RHIC. The general features of the Au+Au pseudorapidity distributions results will be discussed and compared to those of /line{p}p collisions. The total charged particle multiplicity, scaled by the number of participant pairs, is observed to be about 40% higher in Au+Au collisions than in /line{p}p and d+Au systems, but, surprisingly at the same level of e+e- collisions. Limiting fragmentation scaling is seen to be obeyed in Au+Au collisions.

  12. Sonochemical fabrication of CdSe{sub x}Te{sub 1-x}/Au nanotubes and their potential application in biosensing

    Energy Technology Data Exchange (ETDEWEB)

    Lu Feng; Liu Shanhu, E-mail: liushanhu@163.com; Jiang Liping; Zhu Junjie, E-mail: jjzhu@nju.edu.cn [Nanjing University, State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering (China)

    2013-01-15

    CdSe{sub x}Te{sub 1-x} semiconductor alloy nanotubes (with an external diameter of 140 nm and an internal diameter of 100 nm) were successfully prepared based on the sacrificial template of Cd(OH)Cl nanorods, and were further in situ assembled with gold nanoparticles (AuNPs) via a sonochemical approach to form the CdSe{sub x}Te{sub 1-x}/Au nanotubes. The prepared CdSe{sub x}Te{sub 1-x}/Au nanotubes were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, and X-ray photoelectron spectra. CdSe{sub x}Te{sub 1-x}/Au nanotubes could integrate the advantages of the electronic properties of CdSeTe and the biocompatible properties of AuNPs. A novel biosensor was fabricated after the immobilization of hemoglobin (Hb) on CdSe{sub x}Te{sub 1-x}/Au nanotubes. The immobilized Hb exhibited fast direct electron transfer and good electrocatalytic performance to H{sub 2}O{sub 2}.

  13. Synthesis of double-shelled sea urchin-like yolk-shell Fe3O4/TiO2/Au microspheres and their catalytic applications

    International Nuclear Information System (INIS)

    Double-shelled sea urchin-like yolk-shell Fe3O4/TiO2/Au microspheres were successfully synthesized through loading Au nanoparticles on the Fe3O4/TiO2 support by a in situ reduction of HAuCl4 with NaBH4 aqueous solution. These microspheres possess tunable cavity size, adjustable shell layers, high structural stability and large specific surface area. The Au nanoparticles of approximately 5 nm in diameter were loaded both on the TiO2 nanofibers and inside the cavities of sea urchin-like yolk-shell Fe3O4/TiO2 microspheres. The sea urchin-like structure composed of TiO2 nanofibers ensure the good distribution of the Au nanoparticles, while the novel double-shelled yolk-shell structure guarantees the high stability of the Au nanoparticles. Furthermore, the Fe3O4 magnetic core facilitates the convenient recovery of the catalyst by applying an external magnetic field. The Fe3O4/TiO2/Au microspheres display excellent activities and recycling properties in the catalytic reduction of 4-nitrophenol (4-NP): the rate constant is 1.84 min−1 and turnover frequency is 5457 h−1. (paper)

  14. A study on the effect of low energy ion beam irradiation on Au/TiO2 system for its application in photoelectrochemical splitting of water

    Science.gov (United States)

    Verma, Anuradha; Srivastav, Anupam; Sharma, Dipika; Banerjee, Anamika; Sharma, Shailja; Satsangi, Vibha Rani; Shrivastav, Rohit; Avasthi, Devesh Kumar; Dass, Sahab

    2016-07-01

    Nanostructured TiO2 thin films were deposited on indium tin oxide (ITO) substrate via sol-gel technique and were modified by plasmonic Au layer. The plasmonic Au modified TiO2 (Au/TiO2) thin films were then irradiated with 500 keV Ar2+ ion beam at different ion fluences viz. 1 × 1016, 3 × 1016 and 1 × 1017 to study the effect of nuclear energy deposition on the morphology, crystallinity, band gap, surface plasmon resonance (SPR) peak exhibited by Au particles and photoelectrochemical properties of the system. Prepared thin films were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Rutherford backscattering spectrometry (RBS) measurements and UV-visible spectroscopy. The photoelectrochemical measurements revealed that both Au/TiO2 and Au/TiO2 thin film irradiated at 1 × 1016 fluence exhibits enhanced photoelectrochemical response in comparison to pristine TiO2. The film irradiated at 1 × 1016 fluence offered maximum applied bias photon-to-current efficiency (ABPE) and shows 6 times increment in photocurrent density which was attributed to more negative flat band potential, maximum decrease in band gap, high open circuit voltage (Voc) and reduced charge transfer resistance.

  15. Structural, electronic and magnetic properties of Au-based monolayer derivatives in honeycomb structure

    Science.gov (United States)

    Kapoor, Pooja; Sharma, Munish; Kumar, Ashok; Ahluwalia, P. K.

    2016-05-01

    We present electronic properties of atomic layer of Au, Au2-N, Au2-O and Au2-F in graphene-like structure within the framework of density functional theory (DFT). The lattice constant of derived monolayers are found to be higher than the pristine Au monolayer. Au monolayer is metallic in nature with quantum ballistic conductance calculated as 4G0. Similarly, Au2-N and Au2-F monolayers show 4G0 and 2G0 quantum conductance respectively while semiconducting nature with calculated band gap of 0.28 eV has been observed for Au2-O monolayer. Most interestingly, half metalicity has been predicted for Au2-N and Au2-F monolayers. Our findings may have importance for the application of these monolayers in nanoelectronic and spintronics.

  16. Integrative Modeling of Caprock Integrity in the Context of CO2 Storage: Evolution of Transport and Geochemical Properties and Impact on Performance and Safety Assessment Modélisation intégrée de l’intégrité des roches de couverture dans le contexte du stockage du CO2 : évolution des propriétés de transport et impact sur les performances et la sûreté du stockage

    Directory of Open Access Journals (Sweden)

    Bildstein O.

    2010-06-01

    valuation de performance des couvertures et une étude de sûreté afin de s’assurer de leur préservation et de leur intégrité sur le long terme (de l’ordre du millénaire. L’objectif est, d’une part, d’aboutir à la construction d’un modèle phénoménologique multi-échelle global, puis à un modèle numérique décrivant le confinement du CO2 par les couvertures, et, d’autre part, de déterminer les performances du confinement en identifiant les processus clés et les paramètres les plus influents. Une première partie du programme a consisté en une intégration spatiale de l’ensemble des données phénoménologiques et structurales disponibles à la suite des travaux réalisés dans les différents volets (WP1 à WP4 et à la définition des scénarios types d’évolution du site de stockage (niveaux réservoirs et encaissants. Ce travail a permis de définir les cas tests à prendre en compte et de réaliser les calculs de performance par rapport aux scénarios d’injection et par rapport aux hétérogénéités majeures identifiées dans les niveaux de confinement (notamment les fractures. Les résultats montrent que l’injection de CO2 peut avoir un effet significatif, en altérant la porosité par dissolution et précipitation de minéraux, mais que l’impact est limité dans l’espace, de quelques décimètres à quelques mètres de l’interface réservoir-couverture, selon que la bulle de CO2 supercritique pénètre ou non dans la couverture et selon la présence ou l’absence de fractures. La prise en compte des résultats issus de l’analyse de sensibilité et l’analyse des incertitudes permettra de conduire des calculs de sûreté plus précis. Appliqués au futur site d’injection, ces calculs permettront d’évaluer la pérennité des propriétés de confinement des couvertures et de valider la qualité de confinement du site de stockage de CO2. Il conviendra notamment d’évaluer l’impact du couplage entre les phénomènes g

  17. Collective flow in Au + Au collisions

    International Nuclear Information System (INIS)

    Based on a preliminary sample of Au + Au collisions in the EOS time projection chamber at the Bevalac, we study sideward flow as a function of bombarding energy between 0.25A GeV and 1.2A GeV. We focus on the increase in in-plane transverse momentum per nucleon with fragment mass. We also find event shapes to be close to spherical in the most central collisions, independent of bombarding energy and fragment mass up to 4He

  18. Synthesis of SERS active Au nanowires in different noncoordinating solvents

    International Nuclear Information System (INIS)

    Au nanowires with length up to micrometers were synthesized through a simple and one-pot solution growth method. HAuCl4 was reduced in a micellar structure formed by 1-octadecylamine and oleic acid in hexane, heptane, toluene and chloroform, respectively. As the non-polarity of noncoordinating solvents can affect the nucleation and growth rates of Au nanostructures, Au nanowires with different diameters could be obtained by changing the noncoordinating solvents in the synthetic process. The influences of the solvents on the morphology of Au nanowires were systematically studied. When using hexane as reaction solvent, the product turned to be high portion of Au nanowires with more uniform size than the others. Furthermore, surface-enhanced Raman scattering (SERS) spectrum of 2-thionaphthol was obtained on the Au nanowire-modified substrate, indicating that the as-synthesized Au nanowires have potential for highly sensitive optical detection application.

  19. Au-Free GaN High-Electron-Mobility Transistor with Ti/Al/W Ohmic and WN X Schottky Metal Structures for High-Power Applications

    Science.gov (United States)

    Hsieh, Ting-En; Lin, Yueh-Chin; Chu, Chung-Ming; Chuang, Yu-Lin; Huang, Yu-Xiang; Shi, Wang-Cheng; Dee, Chang-Fu; Majlis, Burhanuddin Yeop; Lee, Wei-I.; Chang, Edward Yi

    2016-07-01

    In this study, an Au-free AlGaN/GaN high-electron-mobility transistor (HEMT) with Ti/Al/W ohmic and WN x Schottky metal structures is fabricated and characterized. The device exhibits smooth surface morphology after metallization and shows excellent direct-current (DC) characteristics. The device also demonstrates better performance than the conventional HEMTs under high voltage stress. Furthermore, the Au-free AlGaN/GaN HEMT shows stable device performance after annealing at 400°C. Thus, the Ti/Al/W ohmic and WN X Schottky metals can be applied in the manufacturing of GaN HEMT to replace the Au based contacts to reduce the manufacturing costs of the GaN HEMT devices with comparable device performance.

  20. Au-Free GaN High-Electron-Mobility Transistor with Ti/Al/W Ohmic and WN X Schottky Metal Structures for High-Power Applications

    Science.gov (United States)

    Hsieh, Ting-En; Lin, Yueh-Chin; Chu, Chung-Ming; Chuang, Yu-Lin; Huang, Yu-Xiang; Shi, Wang-Cheng; Dee, Chang-Fu; Majlis, Burhanuddin Yeop; Lee, Wei-I.; Chang, Edward Yi

    2016-04-01

    In this study, an Au-free AlGaN/GaN high-electron-mobility transistor (HEMT) with Ti/Al/W ohmic and WNx Schottky metal structures is fabricated and characterized. The device exhibits smooth surface morphology after metallization and shows excellent direct-current (DC) characteristics. The device also demonstrates better performance than the conventional HEMTs under high voltage stress. Furthermore, the Au-free AlGaN/GaN HEMT shows stable device performance after annealing at 400°C. Thus, the Ti/Al/W ohmic and WN X Schottky metals can be applied in the manufacturing of GaN HEMT to replace the Au based contacts to reduce the manufacturing costs of the GaN HEMT devices with comparable device performance.

  1. TiO2 nanotube arrays co-loaded with Au nanoparticles and reduced graphene oxide: Facile synthesis and promising photocatalytic application

    International Nuclear Information System (INIS)

    Graphical abstract: Methyl orange (MO) can be efficiently removed through photodegradation process using a novel photocatalyst, Au nanoparticles and reduced graphene oxide co-loaded TiO2 nanotube arrays. Highlights: •The photocatalyst is prepared by an one-step constant potential deposition process. •The ternary photocatalyst shows effective separation of photogenerated charges. •The photocatalyst displays almost 100% photocatalytic removal of methyl orange. •The photocatalyst is easily recovered with excellent cycling stability. -- Abstract: Au nanoparticles and reduced graphene oxide co-loaded TiO2 nanotube arrays (Au/RGO–TiO2 NTs) were prepared through a simple one-step constant-potential electrolysis of chloroauric acid and graphene oxide on TiO2 NTs. Compared with Au–TiO2 NTs, RGO–TiO2 NTs and un-modified TiO2 NTs, the Au/RGO–TiO2 NTs exhibited high efficiency in photocatalytic degradation of methyl orange (MO) under simulated solar light irradiation. The highly efficient photocatalytic activity is associated with broad absorption in the visible light region, increased photoinduced charge separation through transferring photogenerated electrons from TiO2 NTs to both Au and RGO, as well as the strong adsorption ability of RGO to MO molecules. Moreover, the Au/RGO–TiO2 NTs has an excellent stability. This work provides an insight into designing and synthesizing new TiO2 NTs-based hybrid materials for effective visible light-activated photocatalysis

  2. Évaluation comparée du colmatage bactériologique d'un géocomposite de drainage en fond d'installation de stockage de déchets Experimental evaluation of the biological clogging of drainage geocomposite at the botom of landfill

    OpenAIRE

    BLOND, Eric ; FOURMONT, Stéphane ; BLOQUET, Carole

    2012-01-01

    Dans le secteur des géosynthétiques, la qualité, les performances, la durabilité et la conformité sont essentielles, notamment pour une utilisation sécurisée sur des sites comme les installations de stockage des déchets. Cet article nous présente une étude du potentiel de colmatage biologique de géocomposites de drainage utilisés pour remplacer partiellement la couche granulaire drainante en fond de casier d'une installation de stockage de déchets non dangereux. This paper presents a study of...

  3. Impact of Fractures on CO2 Storage Monitoring: Keys for an Integrated Approach Impact de la présence de fractures pour le monitoring des stockages de CO2 : éléments pour une approche intégrée

    Directory of Open Access Journals (Sweden)

    Dubos-Sallée N.

    2012-04-01

    density expected at depth in the same formation. Furthermore, rock mechanics helps in understanding the fracturation state at depth to identify the predominant fractures in regard to the interpretation of seismic anisotropy in terms of fluid substitution inside the fracture network. Le monitoring des sites de stockage de CO2 dans des réservoirs fracturés (champs d’hydrocarbures déplétés ou aquifères salins profonds nécessite de prendre en compte l’impact de la fracturation et la substitution de fluides sur la réponse sismique. Les données sismiques peuvent fournir des informations sur la souplesse additionnelle due à la présence de fractures et de fluides à travers l’analyse de l’anisotropie sismique azimutale avec un modèle de physique des roches adapté. Nous introduisons un modèle de physique des roches construit en collaboration avec des géologues qui fournit une description réaliste des milieux fracturés. Ce modèle concerne des milieux géologiques fracturés en présence de fluides et qui sont caractérisés par un certain degré de porosité matricielle, la présence de plusieurs familles de fractures connectées ou non avec la porosité matricielle et l’existence d’une anisotropie intrinsèque. L’application directe de ce modèle montre que la valeur de l’anisotropie des ondes P mesurée à partir de données sismiques peut être expliquée par plusieurs jeux de paramètres parmi lesquels la densité de fractures, la souplesse du fluide interstitiel ou la porosité. La présence d’une anisotropie inhérente modifie également l’anisotropie des ondes P et, par conséquent, l’interprétation de sa valeur en termes de substitution fluide dans un milieu poreux fracturé. En ce qui concerne le monitoring de la substitution fluide, si des données sismiques sont acquises avant et après cette substitution, la modification du niveau d’anisotropie des ondes P peut être liée au changement de souplesse du contenu fluide dans le

  4. Applicability of near-infrared hyperspectral imagery (NIR-HI) for sensor based sorting of an epithermal Au-Ag ore

    NARCIS (Netherlands)

    Dalm, M.; Buxton, M.W.N.; Van Ruitenbeek, F.J.A.

    2015-01-01

    In the presented study test work was performed with near-infrared hyperspectral imagery (NIR-HI) on 36 ore samples from a South-American epithermal Au-Ag mine. The aim of the test work was to investigate if NIR-HI provides information about the alteration mineralogy of samples that can be used to pr

  5. One-step construction of an electrode modified with electrodeposited Au/SiO2 nanoparticles, and its application to the determination of NADH and ethanol

    International Nuclear Information System (INIS)

    A new electrode was developed by one-step potentiostatic electrodeposition (at -2. 0 V for 20 s) of Au/SiO2 nanoparticles on a glassy carbon electrode. The resulting electrode (nano-Au/SiO2/GCE) was characterized by scanning electronic microscopy, X-ray photoelectron spectroscopy and electrochemical techniques. The electrochemical behavior of dihydronicotinamide adenine dinucleotide (NADH) at the nano-Au/SiO2/GCE were thoroughly investigated. Compared to the unmodified electrode, the overpotential decreased by about 300 mV, and the current response significantly increased. These changes indicated that the modified electrode showed excellent catalytic activity in the oxidation of NADH. A linear relationship was obtained in the NADH concentration range from 1. 0 x 10-6 to 1. 0 x 10-4 mol L-1. In addition, amperometric sensing of ethanol at the nano-Au/SiO2/GCE in combination with alcohol dehydrogenase and nicotinamide adenine dinucleotide was successfully demonstrated. A wide linear response was also found for ethanol in the range from 5. 0 x 10-5 to 1. 0 x 10-3 mol L-1 and 1. 0 x 10-3 to 1. 0 x 10-2 mol L-1, respectively. The method was successfully applied to determine ethanol in beer and biological samples. (author)

  6. Preparation and Characterization of Au-ZrO2-SiO2 Nanocomposite Spheres and Their Application in Enrichment and Detection of Organophosphorus Agents

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yuqi; Tu, Haiyang; Zhang, Aidong; Du, Dan; Lin, Yuehe

    2012-03-01

    Au-ZrO{sub 2}-SiO{sub 2} nanocomposite spheres were synthesized and used as selective sorbents for the solid-phase extraction (SPE) of orananophosphorous agents. A non-enzymatic electrochemical sensor based on an Au-ZrO{sub 2}-SiO{sub 2} modified electrode was developed for selective detection of orananophosphorous pesticides (OPs). The Au-ZrO{sub 2}-SiO{sub 2} nanocomposite spheres were synthesized by hydrolysis and condensation of zirconia n-butoxide (TBOZ) on the surface of SiO{sub 2} spheres and then introduction of gold nanoparticles on the surface. Transmission electron microscope and X-ray photoelectron spectroscopy were performed to characterize the formation of the nanocomposite sphere. Fast extraction of OP was achieved by Au-ZrO{sub 2}-SiO{sub 2} modified electrode within 5 min via the specific affinity between zirconia and phosphoric group. The assay yields a broad concentration range of paraoxon-ethyl from 1.0 to 500 ng/mL{sup -1} with a detection limit 0.5 ng/mL{sup -1}. This selective and sensitive method holds great promise for the enrichment and detection of OPs.

  7. The synthesis of Au@C@Pt core-double shell nanocomposite and its application in enzyme-free hydrogen peroxide sensing

    Science.gov (United States)

    Zhang, Yayun; Li, Yuhui; Jiang, Yingying; Li, Yancai; Li, Shunxing

    2016-08-01

    A novel Au@C@Pt core-double shell nanocomposite was synthesized and used to fabricate enzyme-free electrochemical sensor for rapid and sensitive detection of hydrogen peroxide (H2O2). The well-designed Au@C@Pt core-double shell nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM) and energy-dispersed spectrum (EDS). The Au@C@Pt core-double shell nanocomposite modified glassy carbon electrode (Au@C@Pt/GCE) exhibits good electrocatalytic activity towards H2O2 reduction at 0.0 V and can be used as H2O2 sensor. The sensor displays two wide linear ranges towards H2O2 detection. The one is 9.0 μM-1.86 mM with high sensitivity of 144.7 μA mM-1 cm-2, and the other is 1.86 mM-7.11 mM with sensitivity of 80.1 μA mM-1 cm-2. When signal to noise (S/N) is 3, the calculated detection limit (LOD) is 0.13 μM. Furthermore, the interference from the common interfering species such as glucose, ascorbic acid, dopamine and uric acid can be effectively avoided to H2O2 detection. Additionally, the H2O2 sensor also displays good stability and reproducibility.

  8. Evolution of thermal micro-measurement technique for various applications; Evolution des techniques de micromesures thermiques au travers de quelques applications

    Energy Technology Data Exchange (ETDEWEB)

    Thiery, L.; Bailly, Y.; Lanzetta, F.; Gualous, H.; Gavignet, E. [Institut de genie energetique (ICE), Institut des microtechniques de Franche-Comte (IMFC), Universite de Franche-Comte, 90 - Belfort (France)

    1998-01-01

    The thermoelectric sensors made at present in our laboratory have junction dimensions from e few micrometers to 0.5 {mu}m. Two techniques are used: welding of ultra-thin wires and vacuum deposition (PVD). Two applications related to the first one will be presented: the detection of periodic field of temperature for photothermal microscopy and acoustic resonator characterization. In the latter, the comparison of simultaneous pressure and temperature will lead us to improve the knowledge of thermo-acoustic phenomena. The deposition technique allows us to create either simple thermoelectric couples, multiple as thermopiles; or heat (and light) flow sensors. Our work is presented in that field, with the development of a laser light sensor designed to image its light profile for large emission bandwidth and power densities. Finally, the description followed by an example of application is shown in the case of the heat flow measurement between a laminar gaseous flow and a wall. By comparison, we show that the use of such sensors could be worthwhile to replace the usual temperature sensors in the estimation of the heat transfer coefficient at the gas-wall boundary. (authors) 27 refs.

  9. Au pair trajectories

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    workers from the global South, the first article demonstrates how Facebook can be a fruitful methodological tool in the aspiration to open up the research to new themes of inquiry. However, rather than disregarding the au pairs’ economic problems, the dissertation shows how their family participation and......Since 2000, thousands of young Filipino migrants have come to Denmark as au pairs. Officially, they are there to “broaden their cultural horizons” by living temporarily with a Danish host family, but they also conduct domestic labor in exchange for food and money, which allows them to send...... pair-sending families in the Philippines, this dissertation examines the long-term trajectories of these young Filipinas. It shows how the au pairs’ local and transnational family relations develop over time and greatly influence their life trajectories. A focal point of the study is how au pairs...

  10. A measuring method of photo-electric cross section. Application to high-Z elements between 40 keV and 220 keV. Measurement of K absorption edge energy of Au, Th, U, Pu

    International Nuclear Information System (INIS)

    This study first describes a bent crystal monochromator developed for the production of monochromatic beams in a continuous energy range from 30 to 250 keV; it is completed by a metrological application of the device (determination of K absorption edge energy of Au, Th, U, Pu). A method and the associated experimental procedure were developed to measure the photo-electric cross section for high-Z elements; the results are presented with a relative uncertainty ranging between 3 and 6%. Finally, the experimental values are compared with values calculated from theories using self-consistent potential models

  11. Effets de site : évalutation expérimentale et modélisations multidimensionnelles : application au site test EURO-SEISTEST (Grèce)

    OpenAIRE

    Riepl, Judith

    1997-01-01

    L'objectif de cette thèse est, l'étude fine des effets d'amplification suite à la géologie locale, notamment dans des bassins sédimentaires, ainsi que l'évaluation des avantages et Iimites des méthodes d'estimations. La partie expérimentale est basée sur des données acquises au site test EURO-SEISTEST, le premier site-test en Europe occidentale proche de Thessalonique (Grèce). Après une évaluation des effets d'amplification au site même et une étude de leur stabilité en fonction de plusieurs ...

  12. Proposition d'un modèle de simplification d'un système documentaire. Application au sein de Turbomeca

    OpenAIRE

    Barroso, Ludovic; Maranzana, Nicolas; Douvrendelle, Franck

    2015-01-01

    La gestion de la qualité est un domaine central pour les entreprises. Associé au système de vérification et au système d'analyse des résultats, c'est à travers ce troisième pilier, le système documentaire, que les entreprises formalisent leur organisation. Fréquemment les systèmes documentaires des sociétés sont volumineux, difficiles à maîtriser et ne suscitent plus autant d'intérêt pour leur personnel. Le modèle proposé ici présente la manière dont on peut améliorer l'efficacité du système ...

  13. Oxidation and reduction kinetics of eutectic SnPb, InSn, and AuSn: a knowledge base for fluxless solder bonding applications

    OpenAIRE

    Kuhmann, Jochen Friedrich; Preuss, A.; Adolphi, B.; K. Maly; Wirth, T.; Oesterle, W.; Pittroff, W.; Weyer, G.; Fanciulli, M.

    1998-01-01

    For microelectronics and especially for upcoming new packaging technologies in micromechanics and photonics fluxless, reliable and economic soldering technologies are needed. In this article, we consequently focus on the oxidation and reduction kinetics of three commonly used eutectic solder alloys: (1) SnPb; (2) InSn; (3) AuSn. The studies of the oxidation kinetics show that the growth of the native oxide, which covers the solder surfaces from the start of all soldering operations is self-li...

  14. Codetermination of crystal structures at high pressure: Combined application of theory and experiment to the intermetallic compound AuGa2

    Science.gov (United States)

    Godwal, B. K.; Stackhouse, S.; Yan, J.; Speziale, S.; Militzer, Burkhard; Jeanloz, R.

    2013-03-01

    A combination of x-ray diffraction at high pressures and first-principles calculations reveals the sequence of crystal-structural phase transitions in AuGa2 from cubic (Fm3¯m) to orthorhombic (Pnma) at 10 (±4) GPa and then to monoclinic (P21/n) at 33 (±6) GPa. Neither theory nor experiment would have been adequate, on their own, in documenting this sequence of phases, but together they confirm a sequence differing from the Fm3¯m→Pnma→P63/mmc transitions predicted for CaF2 and Pnma → P1121/a transition reported for PbCl2 and SnCl2. The combined results from theory and experiment also allow us to constrain the equations of state of the three phases of AuGa2. Calculations on the analog PbCl2 predict a transition to the P21/n phase seen in AuGa2 that could, therefore, be a common high-pressure phase for PbCl2-structured compounds.

  15. Application of ZnO quantum dots dotted carbon nanotube for sensitive electrochemiluminescence immunoassay based on simply electrochemical reduced Pt/Au alloy and a disposable device

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Fang; Deng, Wenping; Zhang, Yan [Key Laboratory of Chemical Sensing and Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022 (China); Ge, Shenguang [Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials, University of Jinan, Jinan, 250022 (China); Yu, Jinghua, E-mail: ujn.yujh@gmail.com [Key Laboratory of Chemical Sensing and Analysis in Universities of Shandong, School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022 (China); Song, Xianrang, E-mail: sxr@vip.163.com [Cancer Research Center, Shandong Tumor Hospital, Jinan, 250012 (China)

    2014-03-01

    Highlights: • A sandwich-type electrochemluminence immunosensor was fabricated. • Simply electrochemical reduced Pt/Au alloy was selected as immunosensing probes. • ZnO@CNT composite was first employed as signal amplification label. Abstract: We report on a disposable microdevice suitable for sandwich-type electrochemiluminescence (ECL) detection of prostate specific antigen (PSA). The method is making use of ZnO quantum dots dotted carbon nanotube (ZnO@CNT) and simply electrochemical reduced Pt/Au alloy. The latter was selected as immunosensing probe to modify screen-printed carbon electrode, due to its excellent electrical property. For further ultrasensitive, low-potential and stable ECL detection, ZnO@CNT composite was first synthesized using a facile solvothermal method, and employed as signal amplification label. In this work, two working electrodes in one device were used for one determination to obtain more exact results based on screen-print technique. Taking advantage of dual-amplification effects of the Pt/Au and ZnO@CNT, this immunosensor could detect the PSA quantitatively, in the range of 0.001–500 ng mL⁻¹, with a low detection limit of 0.61 pg mL⁻¹. The resulting versatile immunosensor possesses high sensitivity, satisfactory reproducibility and regeneration. This simple and specific strategy has vast potential to be used in other biological assays.

  16. Green synthesis, characterization of Au-Ag core-shell nanoparticles using gripe water and their applications in nonlinear optics and surface enhanced Raman studies

    Science.gov (United States)

    Kirubha, E.; Palanisamy, P. K.

    2014-12-01

    In recent years there has been excessive progress in the ‘green’ chemistry approach for the synthesis of gold and silver nanoparticles. Bimetallic nanoparticles have gained special significance due to their unique tunable optical properties. Herein we report a facile one-pot, eco-friendly synthesis of Au-Ag bimetallic core-shell nanoparticles using gripe water as reducing as well as stabilizing agent. The as-synthesized Au-Ag nanoparticles are characterized using UV-Vis spectroscopy to determine the surface plasmon resonance, and using transmission electron microscopy to study the morphology and the particle size. The optical nonlinearity of the bimetallic nanoparticles investigated by z-scan technique using femtosecond Ti:sapphire is in the order of 109. The nonlinear optical parameters such as the nonlinear refractive index n2, nonlinear absorption coefficient β and the third order nonlinear susceptibility χ3 are measured for various wavelengths from 700 nm to 950 nm. The Au-Ag nanoparticles are also used in surface enhanced Raman spectroscopic studies to enhance the Raman signals of rhodamine 6G.

  17. High-energy X-ray focusing and applications to pair distribution function investigation of Pt and Au nanoparticles at high pressures

    Science.gov (United States)

    Hong, Xinguo; Ehm, Lars; Zhong, Zhong; Ghose, Sanjit; Duffy, Thomas S.; Weidner, Donald J.

    2016-02-01

    We report development of micro-focusing optics for high-energy x-rays by combining a sagittally bent Laue crystal monchromator with Kirkpatrick-Baez (K-B) X-ray focusing mirrors. The optical system is able to provide a clean, high-flux X-ray beam suitable for pair distribution function (PDF) measurements at high pressure using a diamond anvil cell (DAC). A focused beam of moderate size (10-15 μm) has been achieved at energies of 66 and 81 keV. PDF data for nanocrystalline platinum (n-Pt) were collected at 12.5 GPa with a single 5 s X-ray exposure, showing that the in-situ compression, decompression, and relaxation behavior of samples in the DAC can be investigated with this technique. PDFs of n-Pt and nano Au (n-Au) under quasi-hydrostatic loading to as high as 71 GPa indicate the existence of substantial reduction of grain or domain size for Pt and Au nanoparticles at pressures below 10 GPa. The coupling of sagittally bent Laue crystals with K-B mirrors provides a useful means to focus high-energy synchrotron X-rays from a bending magnet or wiggler source.

  18. The Vital Function of Fe3O4@Au nanocomposites for Hydrolase Biosensor Design and Its Application in Detection of Methyl Parathion

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yuting; Zhang, Weiying; Lin, Yuehe; Du, Dan

    2013-02-04

    A nanocomposite of gold nanoparticles (AuNPs) decorating a magnetic Fe3O4 core was synthesized using cysteamine (SH–NH2) as linker, and characterized by TEM, XPS, UV and electrochemistry. Then a hydrolase biosensor, based on self-assembly of methyl parathion hydrolase (MPH) on the Fe3O4@Au nanocomposite, was developed for sensitive and selective detection of the organophosphorus pesticide (OP) methyl parathion. The magnetic nanocomposite provides an easy way to construct the enzyme biosensor by simply exerting an external magnetic field, and also provides a simple way to renew the electrode surface by removing the magnet. Unlike inhibition-based enzyme biosensors, the hydrolase is not poisoned by OPs and thus is reusable for continuous measurement. AuNPs not only provide a large surface area, high loading efficiency and fast electron transfer, but also stabilize the enzyme through electrostatic interactions. The MPH biosensor shows rapid response and high selectivity for detection of methyl parathion, with a linear range from 0.5 to 1000 ng/mL and a detection limit of 0.1 ng/mL. It also shows acceptable reproducibility and stability. The simplicity and ease of operation of the proposed method has great potential for on-site detection of P–S containing pesticides and provides a promising strategy to construct a robust biosensor.

  19. Reservoir Characterization for CO2 Sequestration: Assessing the Potential of the Devonian Carbonate Nisku Formation of Central Alberta Caractérisation de réservoir en vue du stockage géologique de CO2 : évaluation du potentiel offert par les carbonates dévoniens de la formation de Nisku, en Alberta central

    Directory of Open Access Journals (Sweden)

    Eisinger C.

    2011-02-01

    Wabamun, au centre de l’Alberta (Canada. Des études antérieures ont montré le potentiel offert par les aquifères salins profonds de la région pour le stockage géologique de ce gaz et le présent article rend compte d’une caractérisation des carbonates dévoniens de la formation Nisku, en vue de réaliser un stockage de CO2. Une telle caractérisation doit surmonter plusieurs handicaps : données de puits et de sismique réflexion assez rares et dispersées, tests en forage de qualité médiocre et rareté des mesures modernes. Des diagraphies de porosité ne sont disponibles que pour un tiers des puits, de sorte qu’on a utilisé les diagraphies de résistivité pour évaluer la porosité et la transmissivité (perméabilité  ×  épaisseur. Le facteur de cimentation d’Archie vaut entre 2 et 3, ce qui maintient une incertitude quant à l’estimation de la porosité ainsi obtenue; toutefois, on peut identifier les intervalles de forte porosité. En ce qui concerne la transmissivité, les valeurs déduites des logs sont mieux corrélées à celles provenant des mesures sur carotte qu’à celles obtenues par DST ou test de production. Un tel comportement n’est pas surprenant, car les tests sont moins sensibles à l’occurrence très locale de bancs rendus extrêmement perméables par une porosité vacuolaire (vuggy ou moldic. La distribution des faciès sédimentaires a été modélisée à l’aide de deux approches, de type “pixel” ou de type “objet”. La seconde, qui utilise des dimensions obtenues par imagerie satellitaire sur des environnements actuels, fournit des résultats plus cohérents avec la compréhension géologique que l’on a de la formation de Nisku, et se traduit par une connectivité à large échelle supérieure à celle obtenue par la méthode “pixel”. Les volumes obtenus indiquent une capacité potentielle de stockage considérable dans cette formation, toutefois les simulations hydrauliques laissent penser que l

  20. Component conversion from pure Au nanorods to multiblock Ag-Au-Ag nanorods assisted by Pt nanoframe templates

    Science.gov (United States)

    Lee, Sangji; Jang, Hee-Jeong; Jang, Ho Young; Kim, Seong Kyu; Park, Sungho

    2016-06-01

    We developed a new method for synthesizing multiblock Ag-Au-Ag nanorods using Pt nanoframes that had been deposited on the edges of Au nanorod seeds. As a function of Au etching time, the length of the Au nanorod decreased symmetrically starting from the two ends, leading to the formation of empty inner space at the ends. Subsequent reduction of Ag ions could be selectively performed in the inner space confined by Pt nanoframes and the resulting Ag-Au-Ag nanorods exhibited characteristic LSPR modes originating from each block component (in a transverse direction) and SPR coupling (in a longitudinal direction). The high quality of the resulting multiblock nanorods enabled observation of the longitudinal quadrupole mode that was induced by Ag-Au SPR coupling in a long axis. The mode exhibited high sensitivity in accordance with the change in the surrounding media, demonstrating great potential for sensor applications.We developed a new method for synthesizing multiblock Ag-Au-Ag nanorods using Pt nanoframes that had been deposited on the edges of Au nanorod seeds. As a function of Au etching time, the length of the Au nanorod decreased symmetrically starting from the two ends, leading to the formation of empty inner space at the ends. Subsequent reduction of Ag ions could be selectively performed in the inner space confined by Pt nanoframes and the resulting Ag-Au-Ag nanorods exhibited characteristic LSPR modes originating from each block component (in a transverse direction) and SPR coupling (in a longitudinal direction). The high quality of the resulting multiblock nanorods enabled observation of the longitudinal quadrupole mode that was induced by Ag-Au SPR coupling in a long axis. The mode exhibited high sensitivity in accordance with the change in the surrounding media, demonstrating great potential for sensor applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr03484e

  1. γ-radiation synthesis of temperature sensitive polymer polyNIPAAm and application in concentration of Au3+ in dilute aqueous solution

    International Nuclear Information System (INIS)

    A Water-soluble temperature sensitive polymer, polyNIPAAm, was synthesized by radiation technology in H2O-THF mixed solutions and further, in simple alcohols, ketones and Cl-containing organic compounds as the solvents. The results showed that all the synthesis was successful. Several polyNIPAAms with different molecular weight were obtained in this way. In addition, the concentration effects of Au2+ in dilute aqueous solutions was investigated by using polyNIPAAm obtained in this work. The concentration coefficient could come up to more than 90%. The effects of acidity and concentration coefficient in the solution were investigated. The optimum conditions were obtained

  2. Direct electron transfer biosensor for hydrogen peroxide carrying nanocomplex composed of horseradish peroxidase and Au-nanoparticle – Characterization and application to bienzyme systems

    Directory of Open Access Journals (Sweden)

    Yusuke Okawa

    2015-09-01

    Full Text Available A reagentless electrochemical biosensor for hydrogen peroxide was fabricated. The sensor carries a monolayer of nanocomplex composed of horseradish peroxidase and Au-nanoparticle, and responds to hydrogen peroxide through the highly efficient direct electron transfer at a mild electrode potential without any soluble mediator. Formation of the nanocomplex was studied with visible spectroscopy and size exclusion chromatography. The sensor performance was analyzed based on a hydrodynamic electrochemical technique and enzyme kinetics. The sensor was applied to fabrication of sensors for glucose and uric acid through further modification of the nanocomplex-carrying electrode with the corresponding hydrogen peroxide-generating oxidases, glucose oxidase and urate oxidase, respectively.

  3. Modélisation et simulation d'un écoulement sous vibration. Application au soudage par ultrasons de composites à matrice thermoplastique.

    OpenAIRE

    Levy, Arthur

    2010-01-01

    Les matériaux composites occupent une place de plus en plus importante dans l'industrie, en particulier aéronautique. Les composites à matrice thermoplastique suscitent aujourd'hui dans ce secteur un très fort engouement par rapport à leurs concurrents thermodurcissables. Le présent travail de thèse se concentre sur le soudage de matériaux composites à matrice thermoplastique. Le procédé de soudage ultrasons consiste à dissiper un travail mécanique au niveau de l'interface. La température aug...

  4. Thiol-PEG-carboxyl-stabilized Fe2O3/Au nanoparticles targeted to CD105: Synthesis, characterization and application in MR imaging of tumor angiogenesis

    International Nuclear Information System (INIS)

    Objective: To detect tumor angiogenesis in tumor-bearing mice using thiol-PEG-carboxyl-stabilized Fe2O3/Au nanoparticles targeted to CD105 on magnetic resonance imaging (MRI). Methods: Fe2O3/Au nanoparticles (hybrids) were prepared by reducing Au3+ on the surface of Fe2O3 nanoparticles. Hybrids were stabilized with thiol-PEG-carboxyl via the Au–S covalent bond, and further conjugated with anti-CD105 antibodies through amide linkages. Characteristics of the hybrid-PEG-CD105 nanoparticles were evaluated. Using these nanoparticles, the labeling specificity of human umbilical vein endothelial cells (HUVECs) was evaluated in vitro. MRI T2*-weighted images were obtained at different time points after intravenous administration of the hybrid-PEG-CD105 nanoparticles in the tumor-bearing mice. After MR imaging, the breast cancer xenografts were immediately resected for immunohistochemistry staining and Prussian blue staining to measure the tumor microvessel density (MVD) and evaluate the labeling of blood microvessels by the hybrid-PEG-CD105 nanoparticles in vivo. Results: The mean diameter of the hybrid-PEG-CD105 nanoparticles was 56.6 ± 8.0 nm, as measured by transmission electron microscopy (TEM). Immune activity of the hybrid-PEG-CD105 nanoparticles was 53% of that of the anti-CD105 antibody, as detected by enzyme-linked immunosorbent assay (ELISA). The specific binding of HUVECs with the hybrid-PEG-CD105 nanoparticles was proved by immunostaining and Prussian blue staining in vitro. For breast cancer xenografts, the combination of the hybrid-PEG-CD105 nanoparticles with blood microvessels was detectable by MRI after 60 min administration of the contrast agent. The T2* relative signal intensity (SIR) was positively correlated with the tumor MVD (R2 = 0.8972). Conclusion: Anti-CD105 antibody-coupled, thiol-PEG-carboxyl-stabilized core–shell Fe2O3/Au nanoparticles can efficiently target CD105 expressed by HUVECs. Furthermore, the hybrid-PEG-CD105 nanoparticles can be

  5. Violence et ordre politique au Nigeria

    OpenAIRE

    Fourchard, Laurent

    2007-01-01

    International audience De nombreuses analyses ont associé le retour d'un régime civil au Nigeria en 1999 au développement d'organisations armées privées et au regain de conflits dits religieux, inter-ethniques ou communautaires. L'application controversée de la charia dans douze Etats du nord et les actions de guérilla dans la région pétrolière du delta ont ainsi largement focalisé l'attention des médias. Le retour de la " démocratie " témoignerait-t-il d'un déclin de l'Etat ? Ces violence...

  6. Développement d’une méthode d’hygiénisation thermique des effluents au moyen d’échangeurs de chaleur (application au lisier porcin)

    OpenAIRE

    Cunault, C.

    2012-01-01

    / La plupart des traitements classiques appliqués aux effluents ont peu d’impact sur les microorganismes pathogènes. Aussi une méthode de traitement thermique des effluents a été développée et son efficacité de désinfection a été évaluée. Son principe repose sur l’application d’un couple temps/température. L’effluent est chauffé en continu puis maintenu chaud avant d’être refroidi. Le système comprend deux échangeurs de chaleur qui permettent de recycler jusqu...

  7. Reduction of graphene oxide by 100 MeV Au ion irradiation and its application as H2O2 sensor

    International Nuclear Information System (INIS)

    Graphene oxide (GO) synthesized from a modified Hummer’s method was reduced (referred, rGO) by using 100 MeV Au ion species and its response to the sense H2O2 was investigated. The changes in the atomic composition and structural properties of rGO after irradiation were studied using x-ray diffraction, Fourier transform infrared spectroscopy and x-ray photo-electron spectroscopy. These results suggested that the removal of the oxygen-containing functional groups and the improvement of the electrochemical performance of reduced graphene oxide (rGO) after ion irradiation. Raman spectroscopic results revealed the increase in the disorder parameter (I D/I G) after Au ion irradiation and also the formation of a large number of small sp2 domains due to the electronic energy loss of ion beam. The resultant rGO was investigated for H2O2 sensing using electrochemical techniques and it showed a good response. (paper)

  8. M\\TiO₂ (M=Au, Ag) transparent aqueous sols and its application on polymeric surface antibacterial post-treatment.

    Science.gov (United States)

    Wu, Liangzhuan; Yu, Yuan; Song, Le; Zhi, Jinfang

    2015-05-15

    In this paper, we reported a simple and mild chemical method for synthesis of crystalline metal\\TiO2 (M=Au, Ag) transparent aqueous sols at low temperature (80°C). It should be found that the as-synthesized metal\\TiO2 sols could easily be coated on the flexible PET surfaces of the through the as-developed electroless-plating-like solution deposition (EPLSD) procedure. The as-prepared metal\\TiO2 sols and related flexible thin film were characterized by TEM, SEM, XRD, UV-vis, and FTIR analysis. The results showed that the Au and Ag nanoparticles can significantly improve the optical absorption properties of TiO2 due to the surface plasmon generated by the noble metal, which in turn enhanced the photo-induced antibacterial performance of the as-prepared metal\\TiO2 flexible film. Moreover, the photo-generated electrons could transfer between the metal and titanium dioxide under different irradiation (ultraviolet or visible light), which could significantly reduce the recombination of photo-induced electrons and holes, resulting in the better photo-induced antibacterial performance. Therefore, the EPLSD procedure may be used as a general polymeric surface antibacterial post-treatment procedure for preparing the metal\\TiO2 flexible film because of the noble metal enhanced antibacterial performance. PMID:25678155

  9. Electrodisintegration of 197Au

    International Nuclear Information System (INIS)

    Cross sections for the (e, xn) reaction on 197Au have been measured for 1= 4 were calculated by means of an intranuclear cascade model. Good agreement is found for x = 7 is discussed. No evidence is found for giant resonances in regions above the giant dipole resonance. (Auth.)

  10. Catalytic activity of Au nanoparticles

    DEFF Research Database (Denmark)

    Larsen, Britt Hvolbæk; Janssens, Ton V.W.; Clausen, Bjerne;

    2007-01-01

    Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change with par......Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change...... with particle size. We find that the fraction of low-coordinated Au atoms scales approximately with the catalytic activity, suggesting that atoms on the corners and edges of Au nanoparticles are the active sites. This effect is explained using density functional calculations....

  11. Interface Effects on Tunneling Magnetoresistance in Organic Spintronics with Flexible Amine-Au Links

    OpenAIRE

    Gorjizadeh, Narjes; Quek, Su Ying

    2013-01-01

    Organic spintronics is a promising emerging field, but the sign of the tunneling magnetoresistance (TMR) is highly sensitive to interface effects, a crucial hindrance to applications. A key breakthrough in molecular electronics was the discovery of amine-Au link groups that give reproducible conductance. Using first principles calculations, we predict that amine-Au links give improved reproducibility in organic spintronics junctions with Au-covered Fe leads. The Au layers allow only states wi...

  12. Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, S.; Shimakura, H. [Niigata University of Pharmacy and Applied Life Sciences, Higashijima, Akiha-ku, Niigata 956-8603 (Japan); Tahara, S. [Faculty of Science, University of the Ryukyus, Nishihara-cho, Okinawa 903-0213 (Japan); Okada, T. [Niigata College of Technology, Kamishin’eicho, Nishi-ku, Niigata 950-2076 (Japan)

    2015-08-17

    The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr{sub 1-c}Au{sub c} with 0.5 ≤ c and Mn{sub 1-c}Au{sub c} with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ{sub 3d} due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ{sub 3d} and E{sub F} in liquid binary TM-M alloys at a composition of 50 at% TM.

  13. LA DIVERSITÉ DÉPLOYÉE AU SEIN DE L’UNIVERSITÉ D’ENTREPRISE : L’APPLICATION CONCRÈTE D’UNE VALEUR ADOPTÉE PAR LA DIRECTION GÉNÉRALE

    Directory of Open Access Journals (Sweden)

    Virginia Drummond-Guitel

    2009-09-01

    Full Text Available La diversité devenue une valeur incontournable adoptée par les grands groupes, encore faut-t-il trouver les moyens concrets pour l’intégrer dans les pratiques des ressources humaines et dans les mentalités des personnes. Le présent papier a pour but de montrer comment les valeurs de la diversité adoptées par la direction générale ont été déclinées et appliquées dans un processus de sélection de candidats pour une formation continue au sein d’une grande organisation internationale. A travers l’application d’une méthode qualitative de recherche, 10 (dix dirigeants ayant conçu la formation et 42 (quarante-deux managers ayant suivi le programme confirment l’atteinte du but stratégique de cette formation, autrement dit, l’atteinte d’une vision partagée (SENGE, 1991, à travers la consolidation d’un fort sentiment d’appartenance à la culture organisationnelle (SCHEIN, 1995. Les managers ont été sélectionnés selon leurs différentes professions, cultures nationales et différents secteurs d’activités, confirmant ainsi une promotion de la diversité au sein de l’organisation.

  14. 金-硅共晶键合技术及其应用%Au-Si Eutectic Bonding Technology and Its Application

    Institute of Scientific and Technical Information of China (English)

    陈颖慧; 施志贵; 郑英彬; 王旭光; 张慧

    2015-01-01

    采用金属过渡层来实现硅-硅低温键合,首先介绍了选择钛金作为金属过渡层的原因和金硅共晶键合的基本原理,然后探索了不同键合面积和不同金层厚度对金硅共晶键合质量的影响规律,开展了图形化的硅晶圆和硅盖板之间的低温共晶键合实验研究,获取了最优键合面积的阈值和最优金层厚度。最后将该低温金硅共晶键合技术应用到MEMS器件圆片级封装实验中,实验结果表明较好地实现了MEMS惯性器件的封装强度,但是还存在密封性差的缺陷,需进一步进行实验改进。%In this paper, metal medium was adopted to realize the low temperature Si-Si bonding.First, the reason for choosing Ti/Au as metal medium was presented , and the principle of Au-Si eutectic bond-ing was introduced .Then the effect of bonding area and metal thickness on Au-Si eutectic bonding quality was explored .The low temperature eutectic bonding between patterned silicon wafer and smooth silicon wafer was researched by experiment .The best bonding area and the optimal metal thickness were obtained .At last , the low temperature eutectic bonding technology was applied in the MEMS wafer level package .Results show that the low temperature eutectic bonding technology can satisfy the bonding strength of MEMS inertial devices .However , the leakproofness of bonding was not enough , which needs to be further improved .

  15. Une approche par formalisme de green réduit pour le calcul des structures en contact dynamique : application au contact pneumatique/chaussée

    OpenAIRE

    Meftah, Rabie

    2011-01-01

    Le travail de cette thèse s'inscrit dans le cadre de la réduction du bruit du traffic routier. Le contact pneumatique/chaussée représente la principale source de ce phénomène dès la vitesse de 50 km/h. Dans ce contexte, une nouvelle démarche de modélisation du comportement dynamique d'un pneumatique roulant sur une chaussée rigide est développée. Au niveau du pneumatique, un modèle périodique est adopté pour calculer les fonctions de Green du pneumatique dans la zone de contact. Ce modèle per...

  16. Oxidation and reduction kinetics of eutectic SnPb, InSn, and AuSn: a knowledge base for fluxless solder bonding applications

    DEFF Research Database (Denmark)

    Kuhmann, Jochen Friedrich; Preuss, A.; Adolphi, B.;

    1998-01-01

    For microelectronics and especially for upcoming new packaging technologies in micromechanics and photonics fluxless, reliable and economic soldering technologies are needed. In this article, we consequently focus on the oxidation and reduction kinetics of three commonly used eutectic solder alloys......: (1) SnPb; (2) InSn; (3) AuSn. The studies of the oxidation kinetics show that the growth of the native oxide, which covers the solder surfaces from the start of all soldering operations is self-limiting. The rate of oxidation on the molten, metallic solder surfaces is significantly reduced...... and reduction kinetics, are applied to flip-chip (FC) bonding experiments in vacuum with and without the injection of H2. Wetting in vacuum is excellent but the self-alignment during flip-chip soldering is restricted. The desired, perfectly self-aligned FC-bonds have been only achieved, using evaporated...

  17. Etude en laboratoire de l'anisotropie des roches par méthode ultrasonique : Application au gneiss de Valabres (Alpes-Maritimes)

    OpenAIRE

    Gasc Barbier, Muriel; Wassermann, Jérôme

    2013-01-01

    Parmi les essais non destructifs, l'auscultation des roches par méthode ultrasonore est un moyen couramment utilisé pour caractériser l'état initial d'un spécimen au laboratoire. S'il est courant de faire ces mesures pour caractériser l'état de fracturation d'une roche, ce type de mesure est moins utilisé pour caractériser l'état d'anisotropie. Des essais de compression uniaxiale avec mesure des vitesses des ondes élastiques ont été réalisés sur des gneiss carottés parallèlement et perpendicu...

  18. 15-µm-pitch Cu/Au interconnections relied on self-aligned low-temperature thermosonic flip-chip bonding technique for advanced chip stacking applications

    Science.gov (United States)

    Thanh Tung, Bui; Kato, Fumiki; Watanabe, Naoya; Nemoto, Shunsuke; Kikuchi, Katsuya; Aoyagi, Masahiro

    2014-01-01

    In this paper, we report the development of reliable fine-pitch micro bump interconnections that used a high-precision room-temperature bonding approach. The accuracy of the bonding process is improved by modifying conventional bump/planar-bonding-pad interconnections to form self-aligned micro bumps/truncated inverted pyramid (TIP) bonding pads, i.e., misalignment self-correction elements (MSCEs). Thermosonic flip-chip bonding (FCB) is utilized to form reliable bonds between these MSCEs at acceptable low temperatures. By applying the proposed bonding approach, the demonstration of fine-pitch Cu bump to Au bonding pad interconnects chip stacking has been realized. Microstructure analyses reveal that 15-µm-pitch micro bump joints are fabricated at room temperature.

  19. Mise en evidence de mouvements de sable a partir d'images satellitales ; application au piemont sud de l'atlas saharien(Algerie

    Directory of Open Access Journals (Sweden)

    ABDELLAOUI ABDELKADER

    2010-09-01

    Full Text Available La zone d’étude se localise au piémont sud de l’Atl as saharien (Algérie et concerne le site de la vil le de Laghouat et ses environs limitrophes. Les principaux éléments orogr aphiques sont représentés par Djebel Ahmar (883m a u Sud-Ouest, Djebel Oum Deloua (1023m au Nord-Ouest, formant un syncli nal perché, et un peu plus au Nord-Ouest le grand s ynclinal du Milok, de direction atlasique. Le principal cours d’eau qui t raverse la zone Est Oued M’zi d’orientation Nord-Ou est-Sud-Est, empruntant par la suite une direction globale sous-latitudinale, à p artir de l’extrémité Sud-Ouest du Djebel Oum Deloua . Son affluent le plus important est Oued Messaad, avec un écoulement Sud-Ouest-Nord -Est. Cette zone comprend différentes formes et formation s sableuses dont la disposition est tributaire des ensembles orographiques, de la topographie de détail et des d irections du transport éolien. La population de Laghouat, ville présaharienne, est passée d’environ 6000 habitants en 1830 à 42800 ha bitants en 1977 et à 119043 habitants en 2003, soit une variation d e 178% (c’est-à-dire une multiplication par un fact eur de 2,8 sur une période de 26 ans entre 1977 et 2003. L’extension du bâti, sous la pression des besoins croissants en logemen ts, arrive à l’heure actuelle aux limites des massifs avoisinants (dépôt s sableux sur les flancs et des zones inondables. Le sable constitue ainsi un facteur de risque permanent de plus en plus ressent i pour la santé publique, la qualité de vie, mais é galement un danger pour les zones de mise en valeur agricole, notamment du Mekh areg à l’Est de Laghouat. Il devient alors pertinen t de mettre au point un moyen de localisation et de surveillance de la d ynamique des édifices de sable dans la région. Les traitements conventionnels de l’image satellita le (compositions colorées, indices thématiques ne permettent pas de différencier correctement le voile sableux

  20. Une architecture générique de Systèmes de recommandation de combinaison d'items : application au domaine du tourisme

    OpenAIRE

    Picot-Clémente, Romain

    2011-01-01

    Cette thèse apporte une généralisation du principe de recommandation des systèmes de recommandation. Au lieu de considérer une recommandation comme un item, elle est considérée comme une combinaison constituée de plusieurs items suivant un pattern donné. Une recommandation d'un seul item est alors un cas particulier de ce type de recommandation. L'architecture de système de recommandation proposé se base sur une architecture dérivée des travaux en systèmes hypermédia adaptatifs. Trois couches...

  1. The transport of gold and molybdenum through hydration in aqueous vapor and vapor-like fluids: Application to porphyry Au and Mo deposits

    Science.gov (United States)

    Hurtig, N. C.; Williams-Jones, A. E.

    2013-12-01

    The hypothesis that vapor is a viable medium for the transport of gold and molybdenum in ore forming magmatic-hydrothermal systems is supported by fluid inclusion data, analyses of volcanic gas condensates and the occurrence of metal-rich incrustations around fumaroles. Experiments have shown that hydration of metal species in water vapor is an essential factor in making such transport possible [1,2,3]. Indeed, hydration has been shown to increase concentrations of Au and Mo in the aqueous vapor phase by several orders of magnitude over those calculated using volatility data. Nevertheless metal concentrations determined experimentally in previous studies are substantially lower than those reported for vapor inclusions in magmatic hydrothermal systems, and are limited to one or two dominant hydrated metal species. To bridge this gap, we performed a series of new experiments extending the density-range to near critical vapor density, and intermediate-density in the case of supercritical fluids. Experiments were carried out in batch-type Ti autoclaves at temperatures between 300 and 500 °C and pressures up to 366 bar in HCl-bearing water vapor. Oxygen fugacity was buffered either by the assemblage MoO2/MoO3 or WO2/WO3 or graphite. Gold and molybdenum concentrations measured in the experimental condensates ranged from 0.9 ppb and 3 ppm in low-density vapor at 300 °C to 4.6 ppm and 481 ppm at 297 bar and 400 °C, respectively. The fugacity of both metals increased exponentially with increasing water fugacity, resulting in an increase in metal solubility between 1 and 3 orders of magnitude from the lowest pressures investigated. Curves representing the experimentally determined relationship between metal fugacity and fH2O were fitted to a step-wise hydration model to extract a set of logarithmic equilibrium constants for P and T extrapolation. We have used the above data to model Au and Mo mobilization in magmatic-hydrothermal vapor plumes. This modeling shows that the

  2. Effect of Silicon on Activity Coefficients of Siderophile Elements (P, Au, Pd, As, Ge, Sb, and In) in Liquid Fe, with Application to Core Formation

    Science.gov (United States)

    Righter, K.; Pando, K.; Danielson, L. R.; Humayun, M.; Righter, M.; Lapen, T.; Boujibar, A.

    2016-01-01

    Earth's core contains approximately 10 percent light elements that are likely a combination of S, C, Si, and O, with Si possibly being the most abundant. Si dissolved into Fe liquids can have a large effect on the magnitude of the activity coefficient of siderophile elements (SE) in Fe liquids, and thus the partitioning behavior of those elements between core and mantle. The effect of Si can be small such as for Ni and Co, or large such as for Mo, Ge, Sb, As. The effect of Si on many siderophile elements is unknown yet could be an important, and as yet unquantified, influence on the core-mantle partitioning of SE. Here we report new experiments designed to quantify the effect of Si on the partitioning of P, Au, Pd, and many other SE between metal and silicate melt. The results will be applied to Earth, for which we have excellent constraints on the mantle siderophile element concentrations.

  3. Etude de la biodégradation des déchets ménagers. Application de la mesure de résistivité électrique

    OpenAIRE

    Bergeron, M.

    2011-01-01

    / Au cours des dernières dizaines d'années, la mise en place d'une gestion durable des déchets ménagers avec des filières de retraitement et de revalorisation est mise au premier plan. 31,5% des déchets collectés par les sociétés privées et les collectivités locales sont destinés à être stockés dans des Installations de stockage des Déchets Non dangereux (ISDND). Ces installations sont associées à des règles de conception et de construction pour prévenir les risques de pollution des eaux sout...

  4. Efficient H2 production over Au/graphene/TiO2 induced by surface plasmon resonance of Au and band-gap excitation of TiO2

    International Nuclear Information System (INIS)

    Highlights: • Both surface plasmon resonance and band-gap excitation were used for H2 production. • Au/Gr/TiO2 composite photocatalyst was synthesized. • Au/Gr/TiO2 exhibited enhancement of light absorption and charge separation. • H2 production rate of Au/Gr/TiO2 was about 2 times as high as that of Au/TiO2. - Abstract: H2 production over Au/Gr/TiO2 composite photocatalyst induced by surface plasmon resonance of Au and band-gap excitation of TiO2 using graphene (Gr) as an electron acceptor has been investigated. Electron paramagnetic resonance study indicated that, in this composite, Gr collected electrons not only from Au with surface plasmon resonance but also from TiO2 with band-gap excitation. Surface photovoltage and UV–vis absorption measurements revealed that compared with Au/TiO2, Au/Gr/TiO2 displayed more effective photogenerated charge separation and higher optical absorption. Benefiting from these advantages, the H2 production rate of Au/Gr/TiO2 composite with Gr content of 1.0 wt% and Au content of 2.0 wt% was about 2 times as high as that of Au/TiO2. This work represents an important step toward the efficient application of both surface plasmon resonance and band-gap excitation on the way to converting solar light into chemical energy

  5. Selection and Characterization of Geological Sites able to Host a Pilot-Scale CO2 Storage in the Paris Basin (GéoCarbone-PICOREF Choix et caractérisation de sites géologiques propices à l’installation d’un pilote pour le stockage de CO2 dans le bassin de Paris (GéoCarbone-PICOREF

    Directory of Open Access Journals (Sweden)

    Brosse É.

    2010-06-01

    largement disponible, grâce aux travaux d’exploration pétrolière depuis 50 ans ; de grands aquifères salins y sont présents, dans les carbonates du Jurassique moyen situés en général entre 1500 et 1800 m de profondeur, et dans les formations gréseuses du Trias, entre 2000 et 3000 m; il existe plusieurs gisements d’hydrocarbures en voie d’épuisement : offrant des capacités de stockage moindres, leur intérêt est d’être bien connus sur le plan géologique et d’être dotés de bonnes qualités en termes de piégeage géologique. Après avoir retraité 750 km de lignes sismiques, et avoir assemblé celles-ci selon six coupes calées sur des données de puits, on a précisé sur la Zone régionale : les grandes caractéristiques des aquifères concernés ; la localisation des failles ; la continuité des couches très peu perméables situées au-dessus des réservoirs. Ces études ont permis de choisir un “Secteur”, d’environ 70 × 70 km, au sein duquel on a ensuite affiné l’investigation géologique : 450 km supplémentaires de lignes sismiques, collecte exhaustive des données de puits, caractérisation fine des propriétés réservoir. Des observations de terrain ont été faites sur des roches équivalentes portées à l’affleurement. Un modèle géologique et informatique complet du Secteur a été construit à partir de ces données. Il permet de générer des maillages pour la simulation de divers comportements attendus suite à l’injection de CO2 (déplacement et dissipation du gaz dans les couches réservoir, modification des pressions et des contraintes, déformation mécanique des terrains, interaction entre l’eau acidifiée et les minéraux, etc.. Parallèlement, le projet a pu avoir accès à toutes les données pétrolières du gisement de Saint-Martin de Bossenay, situé dans la partie Est du Secteur. Grâce à cette opportunité, on a montré quel parti pouvait être tiré, pour un pilote, d’un gisement d’hydrocarbures d

  6. Etre touareg au Mali

    OpenAIRE

    Edmond BERNUS

    1992-01-01

    Après une présentation générale de leur espace, de leur culture commune, des stéréotypes dont ils font l'objet, les Touaregs maliens sont décrits dans leurs diversités régionales. Les révoltes passées, celle de Firhoun, le héros de 1916, puis celle de l'Adrar des Iforas en 1963-64 contre le gouvernement de Modibo Keita, précédent la révolte qui s'étend depuis 1990 au Niger et au Mali avec des guerriers sachant manier armes et voitures. Attaques et répression sauvage se succèdent dans une spir...

  7. Modélisation paramétrique non linéaire des machines asynchrones et démarche d'optimisation associée. Application au dimensionnement dans les véhicules hybrides.

    OpenAIRE

    Pugsley, Gareth

    2004-01-01

    Ce travail concerne l'étude des machines asynchrones à cage dans les applications de traction automobile, en particulier pour les véhicules hybrides. Nous avons développé des modèles et des méthodes utiles pour analyser et dimensionner de telles machines électriques. Nous avons tout d'abord mis au point un modèle électromagnétique non linéaire de la machine, déterminé à partir d'un nombre restreint de calculs "éléments finis". Ce modèle a ensuite été adapté pour réaliser des études de sensibi...

  8. Antibacterial Au nanostructured surfaces

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was information (ESI) available. See DOI: 10.1039/c5nr06157a

  9. Synthesis and electrocatalytic activity of Au/Pt bimetallic nanodendrites for ethanol oxidation in alkaline medium.

    Science.gov (United States)

    Han, Xinyi; Wang, Dawei; Liu, Dong; Huang, Jianshe; You, Tianyan

    2012-02-01

    Gold/Platinum (Au/Pt) bimetallic nanodendrites were successfully synthesized through seeded growth method using preformed Au nanodendrites as seeds and ascorbic acid as reductant. Cyclic voltammograms (CVs) of a series of Au/Pt nanodendrites modified electrodes in 1M KOH solution containing 1M ethanol showed that the electrocatalyst with a molar ratio (Au:Pt) of 3 exhibited the highest peak current density and the lowest onset potential. The peak current density of ethanol electro-oxidation on the Au(3)Pt(1) nanodendrites modified glassy carbon electrode (Au(3)Pt(1) electrode) is about 16, 12.5, and 4.5 times higher than those on the polycrystalline Pt electrode, polycrystalline Au electrode, and Au nanodendrites modified glassy carbon electrode (Au dendrites electrode), respectively. The oxidation peak potential of ethanol electro-oxidation on the Au(3)Pt(1) electrode is about 299 and 276 mV lower than those on the polycrystalline Au electrode and Au dendrites electrode, respectively. These results demonstrated that the Au/Pt bimetallic nanodendrites may find potential application in alkaline direct ethanol fuel cells (ADEFCs). PMID:22071516

  10. Tourisme et communautés rurales au Venezuela : vers une application des principes du Développement Durable

    Directory of Open Access Journals (Sweden)

    Olivier Dehoorne

    2008-02-01

    Full Text Available L’évolution récente du tourisme international au Venezuela est particulièrement intéressante : l'activité touristique qui reste très largement concentrée sur la côte caribéenne, et notamment l’île de Margarita, se diversifie au profit de nouveaux centres d’intérêt dans les régions intérieures. L’affichage de nouvelles volontés politiques sur la scène régionale et internationale, sous l’impulsion du président Chavez, a perturbé le marché touristique national qui était dominé pour les clientèles nord-américaines ; le Venezuela apparaît désormais aux yeux des Etats-Unis comme un pays à risque, instable. C’est dans ce contexte que s’inscrit le « Programa Andes Tropicales » [PAT] qui soutient le  développement rural dans les parcs nationaux ; ce programme repose sur la participation des populations locales et leur implication dans les politiques de conservation des ressources naturelles et culturelles sources de revenus. Le soutien financier des microprojets familiaux et communautaires doivent permettent de lutter contre la pauvreté.The recent evolution of international tourism in Venezuela is particularly interesting. Even if tourism activity remains heavily concentrated on the Caribbean coast, in particular on the island of Margarita, it is nevertheless diversifying gradually to make way for new areas of interest in the country’s interior. The display of new political will on the regional and international scene, under the leadership of President Chavez, has disrupted the national tourism market which was dominated by North American customers. Venezuela now appears in the eyes of the United States as a country that is at risk,and therefore unstable. It is in this context that the “Programa Andes Tropicales" [PAT] was developed to promote rural development in national parks; This program is based on the participation and involvement of local populations in the development of appropriate

  11. Isolation and characterization of the tertiary amine Alamine 304 hydrochioride. Its application on the extraction of Co(II, Au(III and Pt(IV

    Directory of Open Access Journals (Sweden)

    López-Delgado, Aurora

    2000-06-01

    Full Text Available Amine Alamine 304 dissolved in xylene reacts with hydrochloric acid to form the amine chloride (R3NH+Cl- and the amine dichloride (R3NH2Cl2. The former compound was isolated and characterized by chemical analysis, X-ray powder diffraction, infrared spectroscopy and scanning electron microscopy. Lattice parameters of the isolated amine chloride were determined and refined by least-square numerical treatment (monoclinic cell, with a = 29.017(4 Å, b = 14.564(7 Å, c = 5.043(1 Å, b = 95.68(3 ° and V = 2,120 Å3. The amine chloride is a potential anion-exchanger with metals, thus data on the liquid-liquid extraction of Co(II, Au(III and Pt(IV are also reported.

    La amina Alamine 304 disuelta en xileno reacciona con el ácido clorhídrico para formar el cloruro de la amina (R3NH+Cl- y el dicloruro de amina (R3NH2Cl2. El primero de estos compuestos se aisló y caracterizó mediante análisis químico, difracción de rayos X, espectroscopia de IR y microscopía electrónica de barrido. Se determinaron y refinaron los parámetros de red del cloruro de amina (monoclínico, a = 29,017(4 Å, b = 14,564(7 Å, c = 5,043(1 Å, b = 95,68(3 ° y V = 2.120 Å3. El cloruro de amina actúa como un intercambiador aniónico con ciertos metales, por lo que se incluyen datos sobre la extracción líquido-líquido de Co(II, Au(III y Pt(IV.

  12. Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

    International Nuclear Information System (INIS)

    The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr1-cAuc with 0.5 ≤ c and Mn1-cAuc with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ3d due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ3d and EF in liquid binary TM-M alloys at a composition of 50 at% TM

  13. L’olivier au Maroc

    Directory of Open Access Journals (Sweden)

    El Mouhtadi Issam

    2014-03-01

    Full Text Available L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive mais pour conquérir de nouveaux marchés au niveau mondial et profiter ainsi de l’engouement que connaît cette huile reconnue pour ses bienfaits. Le plan national « Maroc Vert » permet ainsi, grâce à des subventions conséquentes, non seulement de renouveler les vergers existant avec la variété traditionnelle picholine du Maroc, mais également la plantation de nouvelles variétés en super-intensif dans le but d’industrialiser au maximum de nouveaux vergers. Il en est de même pour la transformation des olives en huile de bonne qualité avec la mise en place d’unités de trituration modernes qui doivent supplanter à terme la multitude de « maâsra » et réduire ainsi l’impact environnemental dû aux margines. L’olive ne sera plus dans l’avenir que représentée par son huile et ses formes comestibles, mais les résidus de son extraction seront valorisés soit sous forme de combustible élaboré pour le grignon, soit sous forme d’une base de chimie verte pour les sous-produits du raffinage. D’autres applications sont actuellement à l’étude, car le Maroc à compris, comme tous les autres grands pays producteurs, que l’olive était un nouveau gisement de richesses.

  14. Charge transport through O-deficient Au-MgO-Au junctions

    KAUST Repository

    Fadlallah, M. M.

    2009-12-29

    Metal-oxide heterostructures have been attracting considerable attention in recent years due to various technological applications. We present results of electronic structure and transport calculations for the Au-MgO-Au (metal-insulator-metal) heterostructure based on density-functional theory and the nonequilibrium Green’s functions method. The dependence of the conductance of the heterostructure on the thickness of the MgO interlayer and the interface spacing is studied. In addition, we address the effects of O vacancies. We observe deviations from an exponentially suppressed conductance with growing interlayer thickness caused by Au-O chemical bonds. Electronic states tracing back to O vacancies can increase the conductance. Furthermore, this effect can be enhanced by enlarging the interface spacing as the vacancy induced Mg states are shifted toward the Fermi energy.

  15. Dynamic features of rod-shaped Au nanoclusters

    Science.gov (United States)

    So, Woong Young; Das, Anindita; Wang, Shuxin; Zhao, Shuo; Byun, Hee Young; Lee, Dana; Kumar, Santosh; Jin, Rongchao; Peteanu, Linda A.

    2015-08-01

    Gold nanoclusters hold many potential applications such as biosensing and optics due to their emission characteristics, small size, and non-toxicity. However, their low quantum yields remain problematic for further applications, and their fluorescence mechanism is still unclear. To increase the low quantum yields, various methods have been performed: doping, tuning structures, and changing number of gold atoms. In the past, most characterizations have been performed on spherical shaped nanoclusters; in this paper, several characterizations of various rod-shaped Au nanoclusters specifically on Au25 are shown. It has been determined that the central gold atom in Au25 nano-rod is crucial in fluorescence. Furthermore, single molecule analysis of silver doped Au25 nano-rod revealed that it has more photo-stability than conjugated polymers and quantum dots.

  16. Des femmes au tribunal

    OpenAIRE

    Le Pape, Marc

    2010-01-01

    Les archives judiciaires constituent une source essentielle pour les études des sociabilités africaines en situation coloniale. Cet article prend appui sur l’analyse des procès tenus, entre 1923 et 1939, au tribunal du premier degré d’Abidjan, il vise à décrire les argumentations contradictoires par lesquelles femmes et hommes expliquent leurs différends dans l’espace du prétoire. Les registres issus des « juridictions indigènes » permettent également d’apprécier sur quels repères se fondent ...

  17. Massignon face au sionisme

    OpenAIRE

    Mayeres, Agathe

    2010-01-01

    En 1916, Louis Massignon participe aux négociations franco-britanniques qui envisagent, dans la perspective de la capitulation probable des empires centraux, le futur partage de l’Empire ottoman. Dans ce contexte, Massignon cherche à se situer face la question sioniste qui, pour lui, est avant tout un problème de politique orientale.Sous l’influence d'Aaron Aaronsohn, l’islamologue éprouve d’abord pour les pionniers d’Eretz Israel, au regard de leurs réalisations agricoles, une sympathie enth...

  18. Des ignames au riz

    OpenAIRE

    Ivanoff, Jacques

    2003-01-01

    L'igname a toujours été une nourriture importante pour les populations littorales et nomades du monde insulindien. Cependant, avec l'installation du héros civilisateur Gaman le Malais chez le peuple de la reine Sibian, le riz va devenir la composante essentielle des repas moken. En intégrant Gaman en son sein, la société moken va devoir répondre au double défi posé par la menace de la riziculture et de l'islam. En donnant femme à Gaman, en adoptant le nomadisme pour échapper à l'islam ...

  19. Vivre, vivre au Japon

    OpenAIRE

    Tardits, Manuel

    2014-01-01

    Comment faire face au caractère récurrent des catastrophes naturelles et liées à l’homme ? À la prévention, on se doit d’adjoindre une vision écologique plus large et renouvelée. Un débat sur le modèle énergétique du nucléaire et sur nos modèles de développement urbains et sociétaux s’impose.

  20. Introduction au titre I

    OpenAIRE

    2015-01-01

    Pline a eu dans sa carrière d’homme public à défendre les intérêts de l’Etat et des particuliers, à épurer des comptes, à juger et arbitrer. Ainsi le voulait l’ordonnancement du cursus honorum du Bas-Empire, héritier sur tous ces points de la tradition des charges publiques de la République. Les premières tâches du petiturus furent essentiellement judiciaires - on songe au vigintivirat - et elles se poursuivirent par des fonctions de moyenne importance (préture consulat) puis de haute adminis...

  1. Fluctuations Magnetiques des Gaz D'electrons Bidimensionnels: Application AU Compose Supraconducteur LANTHANE(2-X) Strontium(x) Cuivre OXYGENE(4)

    Science.gov (United States)

    Benard, Pierre

    Nous presentons une etude des fluctuations magnetiques de la phase normale de l'oxyde de cuivre supraconducteur La_{2-x}Sr _{x}CuO_4 . Le compose est modelise par le Hamiltonien de Hubbard bidimensionnel avec un terme de saut vers les deuxiemes voisins (modele tt'U). Le modele est etudie en utilisant l'approximation de la GRPA (Generalized Random Phase Approximation) et en incluant les effets de la renormalisation de l'interaction de Hubbard par les diagrammes de Brueckner-Kanamori. Dans l'approche presentee dans ce travail, les maximums du facteur de structure magnetique observes par les experiences de diffusion de neutrons sont associes aux anomalies 2k _{F} de reseau du facteur de structure des gaz d'electrons bidimensionnels sans interaction. Ces anomalies proviennent de la diffusion entre particules situees a des points de la surface de Fermi ou les vitesses de Fermi sont tangentes, et conduisent a des divergences dont la nature depend de la geometrie de la surface de Fermi au voisinage de ces points. Ces resultats sont ensuite appliques au modele tt'U, dont le modele de Hubbard usuel tU est un cas particulier. Dans la majorite des cas, les interactions ne determinent pas la position des maximums du facteur de structure. Le role de l'interaction est d'augmenter l'intensite des structures du facteur de structure magnetique associees a l'instabilite magnetique du systeme. Ces structures sont souvent deja presentes dans la partie imaginaire de la susceptibilite sans interaction. Le rapport d'intensite entre les maximums absolus et les autres structures du facteur de structure magnetique permet de determiner le rapport U_ {rn}/U_{c} qui mesure la proximite d'une instabilite magnetique. Le diagramme de phase est ensuite etudie afin de delimiter la plage de validite de l'approximation. Apres avoir discute des modes collectifs et de l'effet d'une partie imaginaire non-nulle de la self-energie, l'origine de l'echelle d'energie des fluctuations magnetiques est examinee

  2. LA DIVERSITÃ DÃPLOYÃE AU SEIN DE LâUNIVERSITÃ DâENTREPRISE : LâAPPLICATION CONCRÃTE DâUNE VALEUR ADOPTÃE PAR LA DIRECTION GÃNÃRALE

    Directory of Open Access Journals (Sweden)

    Virginia Drummond-Guitel

    2009-09-01

    Full Text Available La diversité devenue une valeur incontournable adoptée par les grands groupes, encore faut-t-il trouver les moyens concrets pour lâintégrer dans les pratiques des ressources humaines et dans les mentalités des personnes. Le présent papier a pour but de montrer comment les valeurs de la diversité adoptées par la direction générale ont été déclinées et appliquées dans un processus de sélection de candidats pour une formation continue au sein dâune grande organisation internationale. A travers lâapplication dâune méthode qualitative de recherche, 10 (dix dirigeants ayant conçu la formation et 42 (quarante-deux managers ayant suivi le programme confirment lâatteinte du but stratégique de cette formation, autrement dit, lâatteinte dâune vision partagée (SENGE, 1991, à travers la consolidation dâun fort sentiment dâappartenance à la culture organisationnelle (SCHEIN, 1995. Les managers ont été sélectionnés selon leurs différentes professions, cultures nationales et différents secteurs dâactivités, confirmant ainsi une promotion de la diversité au sein de lâorganisation.

  3. Determination of the Effect of Geological Reservoir Variability on Carbon Dioxide Storage Using Numerical Experiments Détermination de la variabilité des réservoirs géologiques sur le stockage du CO2 par la méthodologie des plans d’expériences

    Directory of Open Access Journals (Sweden)

    Diedro F.

    2013-06-01

    concentrations. The interaction between the sill and the range of the variogram of the initial dolomite concentration is also important. The initial calcite concentration has a slight influence only on the average porosity in the reservoir. Except for the variations of the size of the dolomite spots within the rock, small variations on the variogram parameters of the mineralogical concentration do not involve important modification of stored carbon nor of the final porosity. Dans le contexte de l’étude du stockage géologique du dioxyde de carbone dans les réservoirs sédimentaires, les simulations tentent de reproduire le plus fidèlement possible les écoulements fluides et gaz, ainsi que les réactions chimiques entre les minéraux (calcite et dolomite et le CO2 injecté [André et al. (2007 Energy Convers. Manage. 48, 1782-1797; Gunter et al. (1999 Appl. Geochem. 4, 1-11]. Cependant, les réservoirs étudiés sont généralement mal connus. Les observations sont peu nombreuses et par suite les variogrammes des propriétés pétrophysiques et minéralogiques sont approchés. L’article vise à quantifier les incertitudes sur les prévisions de stockage du CO2. Nous examinons en particulier l’effet des incertitudes sur deux paramètres opérationnels : la quantité de dioxyde de carbone stockée et la variation moyenne de la porosité. Les sources d’incertitudes retenues sont la variabilité du tirage (dispersion statistique et l’incertitude sur les paramètres du variogramme. Pour examiner la variabilité liée au tirage, les paramètres du variogramme sont fixés et plusieurs simulations sont réalisées, ce qui fournit une distribution de valeurs pour les paramètres opérationnels et permet le calcul d’une variance, apparentée à une variance de répétabilité. Dans le second cas, une analyse de sensibilité permet d’examiner l’influence des paramètres des variogrammes (palier, portée, effet de pépite sur le stockage du CO2. À cet effet, la m

  4. Evolution of the Petrophysical and Mineralogical Properties of Two Reservoir Rocks Under Thermodynamic Conditions Relevant for CO2 Geological Storage at 3 km Depth Évolution des propriétés physiques et minéralogiques de deux roches réservoirs dans des conditions thermodynamiques correspondant à un stockage géologique de CO2 à 3 km de profondeur

    Directory of Open Access Journals (Sweden)

    Rimmelé G.

    2009-11-01

    est considérée comme une solution pour contribuer à la réduction des émissions de gaz à effet de serre dans l’atmosphère. Les interactions entre le CO2 supercritique et la roche-réservoir potentielle doivent être étudiées en détail en conditions de stockage géologique. Quarante échantillons de calcaire de Lavoux et de grès d’Adamswiller, provenant de roches réservoirs du bassin parisien, ont été expérimentalement exposés au CO2 dans un autoclave spécialement construit pour reproduire les conditions thermodynamiques d’un réservoir de stockage de CO2. Les deux types de roches ont été exposés pendant un mois à du CO2 supercritique humide et à de l’eau saturée en CO2, à 28 MPa et 90 °C, ce qui correspond à des conditions d’enfouissement de 3 km de profondeur. L’évolution de leurs propriétés minéralogiques a été suivie par des analyses par diffraction des rayons X, par spectroscopie Raman et par microscopie électronique couplée à un système de microanalyses X. Leurs propriétés physiques et microtexturales ont été estimées en mesurant, avant et après les expériences, le poids, la densité, les propriétés mécaniques, la perméabilité, la porosité globale et la présence d’éventuels gradients de porosité de chaque échantillon. Les résultats montrent que les deux roches ont préservé leurs propriétés mécaniques et minéralogiques, malgré une augmentation de la porosité et de la perméabilité. Des zones microscopiques de dissolution de la calcite observées dans le calcaire sont vraisemblablement responsables de cette augmentation de la perméabilité et de la porosité. Dans le grès, une altération de la pétro-fabrique est supposée se produire due à la réaction des minéraux argileux avec le CO2. Tous les échantillons du calcaire de Lavoux et du grès d’Adamswiller ont montré une altération mesurable dans le CO2 humide et dans l’eau chargée en CO2. Ces expériences en autoclave sont

  5. Studies of the structure and phase transitions of nano-confined pentanedithiol and its application in directing hierarchical molecular assemblies on Au(1 1 1)

    Science.gov (United States)

    Pawlicki, Alison; Avery, Erin; Jurow, Matthew; Ewers, Bradley; Vilan, Ayelet; Drain, Charles Michael; Batteas, James

    2016-03-01

    Directing molecular devices into pre-designed integrated electronic circuits while enforcing selectivity and hierarchy is an inherent challenge for molecular electronics. Here we explore ways to direct the assembly of electrically-active molecular monolayers into specific locations as well as controlling their internal organization. We have accomplished this by two consecutive surface reactions: (1) forming pentanedithiol (C5DT) domains within an inert alkanethiol self-assembled monolayer (SAM) on Au; and (2) selectively binding porphyrin derivatives to the C5DT domains. The C5DT domains were fabricated by phase segregation during co-adsorption from a mixed C5DT/dodecanethiol (C12) solution and nanografting with Atomic Force Microscopy (AFM). AFM revealed that co-absorbed and nanografted C5DT domains were in a standing-up phase and scanning tunneling microscopy (STM) showed that their molecular organization within about 5 nm, 40 nm, 50 nm and 120 nm domains, was dependent upon the size of the domain, such that structure of the C5DT transitions from (\\sqrt{3}   ×  \\sqrt{3} ) R30°, to (2  ×  2), and ultimately to a disordered phase with increasing domain size. This is due to the varying degrees of influence of the surrounding C12; providing sufficient van der Waals interactions as well as a geometric confinement to stabilize the standing-up phase of the C5DT. Understanding the molecular configuration of dithiol SAMs affords their use as a reactive template to subsequently bind active head groups. As a proof of principle, porphyrins with a pendant pentafluorophenyl ring were attached to the C5DT domains by a ‘click’ reaction between the fluorinated ring and the free thiol on the surface. From AFM and STM, these porphyrin derivatives reacted selectively with the C5DT domains with some porphyrins binding directly to the C5DT, subsequently allowing additional localized porphyrin deposition through pi-stacking.

  6. La veille informationnelle en éducation pour répondre au défi de la société de la connaissance au XXI ème siècle :
    Application à la conception d'une plateforme de veille et de partage de connaissance en éducation : Commun@utice

    OpenAIRE

    Pinte, Jean-Paul

    2006-01-01

    Il est désormais admis que le potentiel des technologies de l'information et de la communication (TIC) apporte un nouveau défi au monde moderne et favorise un accès de masse au savoir conforté depuis le début des années 90 par l'avènement du réseau Internet. Appréhender cette nouvelle donne et y adhérer pour accompagner le progrès humain restent au XXI° siècle des défis de taille.Les diverses transitions de notre société du stade industriel au stade de société de l'information et de la connai...

  7. La filière d’oignon d’été dans le Saïs au Maroc : la place et le rôle des intermédiaires de la commercialisation

    Directory of Open Access Journals (Sweden)

    Caroline Lejars

    2014-11-01

    Full Text Available Les agriculteurs dépendent souvent, pour la commercialisation de leur produit, d'un réseau complexe d'intermédiaires privés. Dans les pays en développement, ces intermédiaires de la vente sont souvent accusés de réaliser des profits excessifs et d’être responsables des énormes écarts entre le prix de vente au champ et le prix payé par le consommateur. En s’appuyant sur l’étude de la filière oignon d’été dans le Saïs au Maroc, cet article analyse le rôle de ces réseaux d'intermédiaires, et la répartition des coûts et de la marge bénéficiaire le long de la chaine de production et de commercialisation. On montre ainsi que cette filière crée un grand nombre d'emplois en aval de la production, que ce soit pour la collecte, le stockage, le transport ou la vente. La part de la marge bénéficiaire revenant à l’ensemble des intermédiaires est supérieure à celle revenant aux producteurs, ce qui entraine effectivement une importante différence de prix entre le prix de vente et le prix du marché. Même si les profits et les rôles des intermédiaires sont très variables, certains des acteurs intermédiaires, notamment les détaillants et les revendeurs en gros, récupèrent des marges bien supérieures à celles des agriculteurs. L’organisation des producteurs autour de zones de stockage et d’activités de commercialisation permettrait de limiter le nombre d’intermédiaires, d’accroitre le profit des agriculteurs et de modifier les rapports de négociations souvent asymétriques entre agriculteurs et commerçants.

  8. Une méthode pour estimer l’interception du rayonnement par un couvert bas : application au colza avant montaison

    Directory of Open Access Journals (Sweden)

    Denoroy Pascal

    2002-01-01

    introduire dans l’équation 2 un paramètre représentant le taux de couverture du sol. Si l’estimation par mesure directe de epsiloni et donc l’estimation de k sont assez simples, au moins dans le principe pour un couvert développé en hauteur (colza après montaison [3], une telle mesure devient beaucoup plus complexe dans le cas d’un couvert discontinu et bas. Dans ce milieu hétérogène (et souvent dans des conditions hivernales sévères, une distribution représentative des capteurs de rayonnement est difficile, les risques de perturbation de la mesure (salissure des capteurs, déréglages sont élevés. Plusieurs études ont déjà traité de epsiloni et k dans le cas du colza [3-7]. Elles sont fondées sur des mesures d’interception du rayonnement et concernent des couverts fermés, après montaison. Une autre approche consiste à effectuer un calcul précis de PARi avec des modèles détaillés utilisant une description complète des paramètres (géométriques et radiatifs du feuillage, et du rayonnement incident [8]. Mais les données nécessaires sont alors nombreuses, complexes à obtenir et donc généralement non disponibles en expérimentation. Pour répondre aux besoins de calcul de l’interception du rayonnement dans les phases d’installation du colza, cet article présente une méthode permettant de calculer epsiloni en tenant compte des principales caractéristiques de la morphologie du couvert et du régime radiatif auquel ce dernier est soumis. Les données nécessaires sont limitées : l’indice foliaire, les taux de couverture du sol (deux définitions, la latitude du lieu considéré, la date et le rayonnement incident quotidien. Ce calcul permet une estimation du coefficient moyen d’extinction k (équation 2. On verra que k peut être corrélé à l’IF, la période de l’année et la latitude du lieu, ce qui permet de proposer une estimation simple de k et donc un calcul simplifié de epsiloni, adapté au cas des faibles IF

  9. Control of Urea SCR Systems for US Diesel Applications Commande des systèmes de RCS à l’urée destinés aux applications Diesel US

    Directory of Open Access Journals (Sweden)

    van Nieuwstadt M.

    2011-09-01

    Full Text Available This paper sets out to qualify challenges in the control of urea selective catalytic reduction systems for NOx conversion in Diesel powertrains. We show the importance of ammonia storage control, and the difficulties in estimating it in the face of system uncertainties. The slow storage dynamics of the SCR catalyst are shown to be a major limiting factor on the performance of SCR systems in transient operation. Lastly we show the effect of sensor uncertainty on system performance and how NOx sensors can be used in conjunction with input correlation to distinguish NOx slip from ammonia slip. Cet article a pour objet de qualifier les défis en matière de commande des systèmes de réduction catalytique sélective (RCS dans une solution à base d’urée, pour la conversion des NOx au sein de groupes motopropulseurs Diesel. Nous montrons l’importance de la maîtrise du stockage d’ammoniac ainsi que les difficultés à l’estimer face aux incertitudes du système. Les dynamiques de stockage lentes du catalyseur de RCS s’avèrent constituer un facteur de limitation majeur quant aux performances des systèmes de RCS au cours d’un fonctionnement transitoire. Enfin, nous montrons l’effet de l’incertitude des capteurs sur les performances du système et comment les capteurs de NOx peuvent être utilisés en association avec une corrélation d’entrée pour distinguer une déviation de NOx d’un glissement d’ammoniac.

  10. Electrochemical generation and storage of electrical energy; Production et stockage electrochimiques de l'energie electrique

    Energy Technology Data Exchange (ETDEWEB)

    Fauvarque, J.F.

    2005-07-01

    Electrochemical systems have the remarkable property of being able to convert chemical energy into electrical energy and vice-versa, and this, in conditions close to the thermodynamical reversibility, without any pollutant and noise emissions, and without the need of heavy maintenance. These systems can find various applications in the different domains of the economical life, in particular in the transportation sector. Depending on the application in concern, the batteries, fuel cells and super-capacitors are more or less well-adapted and the choice of a given, or of a combination of technologies must be made with respect to the final objective of the application. This document presents the history, principle, electromotive force, capacity, power, and cyclability of closed electrochemical generators (batteries and capacitors). It presents also the principle and characteristics of open systems (fuel cells and redox systems). (J.S.)

  11. Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes

    Science.gov (United States)

    Zhang, Xuemei; Wu, Xu; Centeno, Anthony; Ryan, Mary P.; Alford, Neil M.; Riley, D. Jason; Xie, Fang

    2016-03-01

    Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that using this photocathode there is a significant increase of the power conversion efficiency (PCE) of a photoelectrochemical solar cell of 100% compared to using a CZTS without Au core. More importantly, the PCE of Au@CZTS photocathode improved by 15.8% compared to standard platinum (Pt) counter electrode. The increased efficiency is attributed to plasmon resonance energy transfer (PRET) between the Au nanoparticle core and the CZTS shell at wavelengths shorter than the localized surface plasmon resonance (LSPR) peak of the Au and the semiconductor bandgap.

  12. Strain Distribution of Au and Ag Nanoparticles Embedded in Al2O3 Thin Film

    Directory of Open Access Journals (Sweden)

    Honghua Huang

    2014-01-01

    Full Text Available Au and Ag nanoparticles embedded in amorphous Al2O3 matrix are fabricated by the pulsed laser deposition (PLD method and rapid thermal annealing (RTA technique, which are confirmed by the experimental high-resolution transmission electron microscope (HRTEM results, respectively. The strain distribution of Au and Ag nanoparticles embedded in the Al2O3 matrix is investigated by the finite-element (FE calculations. The simulation results clearly indicate that both the Au and Ag nanoparticles incur compressive strain by the Al2O3 matrix. However, the compressive strain existing on the Au nanoparticle is much weaker than that on the Ag nanoparticle. This phenomenon can be attributed to the reason that Young’s modulus of Au is larger than that of Ag. This different strain distribution of Au and Ag nanoparticles in the same host matrix may have a significant influence on the technological potential applications of the Au-Ag alloy nanoparticles.

  13. A Geochemical Approach for Monitoring a CO2 Pilot Site: Rousse, France. A Major gases, CO2-Carbon Isotopes and Noble Gases Combined Approach Une méthode géochimique pour la surveillance d’un site pilote de stockage de CO2 : Rousse, France. Approche combinant les gaz majeurs, l’isotopie du carbone du CO2 et les gaz rares

    Directory of Open Access Journals (Sweden)

    Garcia B.

    2012-02-01

    storage pilot suggest that noble gas compositions produced by oxyfuel process are sufficiently exotic compared to compositions found in nature (reservoir, aquifer and air to be directly used as tracers of the injected CO2, and to detect and quantify leaks at soil and aquifer levels. Ce papier presente la caracterisation geochimique des differents gaz, naturels et anthropogeniques, impliques dans un pilote de stockage de CO2 en champ de gaz naturel appauvri (Rousse, France. Dans ce pilote, le CO2 est produit par oxycombustion d’un gaz naturel transforme en gaz domestique a l’usine de Lacq. Ce CO2 est transporte dans un pipeline de 30 km de longueur jusqu’au reservoir de gaz appauvri de Rousse. Les gaz produits a Rousse avant injection de CO2, le gaz commercial de Lacq et le CO2 resultant de l’oxycombustion ont ete echantillonnes, ainsi que les gaz situes dans un puits de surveillance (a une profondeur de 45 m et les gaz du sol situes au voisinage de Rousse. Pour tous ces echantillons, la composition en gaz majeurs, la signature isotopique du carbone ainsi que l’abondance et signature isotopique des gaz rares ont ete determinees. Les compositions gazeuses du gaz naturel de Rousse sont comparables a celle du gaz domestique de Lacq avec le methane comme compose principal et la fraction C2-C5 et CO2 comme gaz residuels. Les gaz des sols refletent typiquement des melanges entre l’air (pole pur et le CO2 d’origine biogenique (avec des teneurs maximales de l’ordre de 9-10 %, tandis que les gaz presents dans le puits de monitoring refletent typiquement la composition de l’air sans exces de CO2. Le gaz de Rousse et le gaz domestique du site de Lacq ont une composition isotopique δ13CCH4 egale a –41,0 ‰ et –43,0 ‰ respectivement. Le CO2 injecte sur Rousse a une composition isotopique δ13CCO2 egale a –40,0 ‰ a la sortie de la chambre d’oxycombustion, tandis que la composition isotopique δ13CCO2 des gaz des sols est comprise entre –15 et –25

  14. Le marketing au concret

    OpenAIRE

    Gaglio, Gérald

    2010-01-01

    Le terme “marketing” suscite généralement la méfiance, car il est spontanément associé à l’idée de manipulation. Au-delà, que font, concrètement, les “gens du marketing” ? Afin d’apporter des pistes de réponse à cette question, nous nous penchons dans cet article sur les enjeux relatifs à un matériau censé alimenter les réflexions et décisions des marketeurs : les études qualitatives de marketing research réalisées dans le cadre de réunions de consommateurs. Cette approche nous conduit à expl...

  15. Introduction au titre II

    OpenAIRE

    2015-01-01

    159. L’objet de notre propos est de démontrer que l’Administration dispose, à la suite du juge, d’un véritable pouvoir normatif. L’admettre suppose d’en identifier les différentes manifestations qui s’expriment essentiellement par voie de circulaires administratives, de réponses ministérielles et d’avis administratifs et qui ne sauraient être assimilées au pouvoir réglementaire que l’Administration détient par ailleurs. L’ordre logique de la démonstration sera donc semblable à celui adopté po...

  16. Introduction au titre I

    OpenAIRE

    2015-01-01

    330. La parenté une construction sociale modelant le donné biologique. Au développement et à la multiplicité des modèles familiaux et conjugaux, correspond inévitablement une pluralité des formes d’expression de la parenté. L’image de l’arbre fait apparaître de manière simple et rapide l’appartenance à la parenté. Clarifier la notion passe par la mise en exergue de ses critères déterminants. Quel lien détermine la continuité généalogique : lien génétique ou lien volontaire ? Le droit doit rép...

  17. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates

    Energy Technology Data Exchange (ETDEWEB)

    Dimopoulos, T., E-mail: theodoros.dimopoulos@ait.ac.at [AIT-Austrian Institute of Technology, Energy Department, Photovoltaic Systems, Giefinggasse 2, 1210, Vienna (Austria); Bauch, M.; Wibowo, R.A.; Bansal, N. [AIT-Austrian Institute of Technology, Energy Department, Photovoltaic Systems, Giefinggasse 2, 1210, Vienna (Austria); Hamid, R. [AIT-Austrian Institute of Technology, Mobility Department, Electric Drive Technologies, Giefinggasse 2, 1210, Vienna (Austria); Auer, M.; Jäger, M. [NanoTecCenter Weiz Forschungsgesellschaft mbH, Franz-Pichler Straße 32, A-8160 Weiz (Austria); List-Kratochvil, E.J.W. [NanoTecCenter Weiz Forschungsgesellschaft mbH, Franz-Pichler Straße 32, A-8160 Weiz (Austria); Institute of Solid State Physics, Graz University of Technology, Petersgasse 16, A-8010 Graz (Austria)

    2015-10-15

    Highlights: • Transparent, low resistive AZO/Au/AZO layers were sputtered on PET substrates. • AZO/Au/AZO has higher figure of merit than ITO for specific Au thicknesses. • The resistance of AZO/Au/AZO is stable against repetitive substrate bending. • AZO/Au/AZO electrode performance is comparable to ITO in light emitting diodes. - Abstract: We investigate the structural, electrical and optical properties of transparent electrodes, consisting of Al-doped ZnO (AZO) and ultrathin Au layers, sputtered on polyethylene terephthalate (PET). These electrodes are relevant for optoelectronic devices and thin film photovoltaics. When deposited on AZO, Au films as thin as 3 nm form electrically conductive, meandering structures, whereas uniform Au films are obtained from a thickness of 5 nm. The sheet resistance decreases with Au thickness, reaching 7 Ω for 11 nm-thick Au. AZO/Au/AZO trilayers combine lowest resistance with highest transparency, while their resistance stability against bending fatigue is superior to the Sn-doped In{sub 2}O{sub 3} (ITO) electrode. The figure of merit of AZO/Au/AZO is larger than of ITO for Au thickness equal to or larger than 9 nm. To demonstrate the applicability of the AZO/Au/AZO transparent electrode, simple organic light emitting diodes were fabricated and tested in comparison to PET/ITO standard substrates.

  18. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates

    International Nuclear Information System (INIS)

    Highlights: • Transparent, low resistive AZO/Au/AZO layers were sputtered on PET substrates. • AZO/Au/AZO has higher figure of merit than ITO for specific Au thicknesses. • The resistance of AZO/Au/AZO is stable against repetitive substrate bending. • AZO/Au/AZO electrode performance is comparable to ITO in light emitting diodes. - Abstract: We investigate the structural, electrical and optical properties of transparent electrodes, consisting of Al-doped ZnO (AZO) and ultrathin Au layers, sputtered on polyethylene terephthalate (PET). These electrodes are relevant for optoelectronic devices and thin film photovoltaics. When deposited on AZO, Au films as thin as 3 nm form electrically conductive, meandering structures, whereas uniform Au films are obtained from a thickness of 5 nm. The sheet resistance decreases with Au thickness, reaching 7 Ω for 11 nm-thick Au. AZO/Au/AZO trilayers combine lowest resistance with highest transparency, while their resistance stability against bending fatigue is superior to the Sn-doped In2O3 (ITO) electrode. The figure of merit of AZO/Au/AZO is larger than of ITO for Au thickness equal to or larger than 9 nm. To demonstrate the applicability of the AZO/Au/AZO transparent electrode, simple organic light emitting diodes were fabricated and tested in comparison to PET/ITO standard substrates

  19. Production and novel radiochemical separation of 194Au from Pt for use in multi-modality nanoparticles

    OpenAIRE

    Graves, S; S Goel; Chen, F; Valdovinos, H.; Barnhart, T.; W. Cai; Nickles, R.

    2015-01-01

    Introduction Gold nanoparticles (AuNPs) have demonstrated their incredible versatility in applications such as in vitro and in vivo imaging, cancer therapy, and drug delivery.[1-3] These AuNPs come in many shapes including nanospheres, nanorods, nanoshells, and nanocages. Their versatility stems from the ability to construct or label a single AuNP with many functions. Many types of AuNPs are inherently flourescent, allowing for ex vivo utilization as well as small animal fluorescence imagi...

  20. Conception et simulation du fonctionnement d’une unité de stockage/déstockage d’électricité renouvelable sur méthane de synthèse au moyen d’un co-électrolyseur à haute température réversible : Approches stationnaire et dynamique

    OpenAIRE

    Er-Rbib, Hanaâ

    2015-01-01

    The objective of this thesis is to design, evaluate the energetic performance and study the transient behavior during heating and startup operations of a reversible process Power To Gas process which is a solution for the integration of renewable electricity in the energy mix. Steady state models are first established in Aspen plus. Assessment of energetic performance shows that 66.7% of the electrical energy is stored as a Synthetic Natural Gas and the losses are caused mainly by the convert...

  1. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    Science.gov (United States)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-12-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611} high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H2PtCl6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells.

  2. Multiplicities in Au-Au and Cu-Cu collisions at sNN=62.4 and 200 GeV

    Science.gov (United States)

    Prorok, Dariusz

    2013-09-01

    Likelihood ratio tests are performed for the hypothesis that charged particle multiplicities measured in Au-Au and Cu-Cu collisions at sNN=62.4 and 200 GeV are distributed according to the negative binomial form. Results suggest that the hypothesis should be rejected in all classes of collision systems and centralities of Pioneering High-Energy Nuclear Interaction Experiment Relativistic Heavy Ion Collider measurements. However, the application of the least-squares test statistic with systematic errors included shows that for the collision system Au-Au at sNN=62.4 GeV the hypothesis could not be rejected in general.

  3. Les applications des sciences humaines à la publicité : De la psychanalyse à la socio-cognition implicite et au neuromarketing

    OpenAIRE

    Courbet, Didier

    2006-01-01

    Applications of the human sciences to advertising: from the psychoanalysis to the implicit social cognition and the neuromarketing Abstract. The advertising executives always carried out a scientific watch with the aim of applying the models and the methods of the social sciences to improve their practices. The objective of the article is double. Firstly, through a short history, since 1930 until our days, we show how, with the different decades, the social sciences became increasingly comple...

  4. Méthodes régularisées pour la prédiction dans les graphes dynamiques et applications au e-marketing

    OpenAIRE

    Richard, Émile

    2012-01-01

    Predicting connections among objects, based either on a noisy observation or on a sequence of observations, is a problem of interest for numerous applications such as recommender systems for e-commerce and social networks, and also in system biology, for inferring interaction patterns among proteins. This work presents formulations of the graph prediction problem, in both dynamic and static scenarios, as regularization problems. In the static scenario we encode the mixture of two different ki...

  5. Developing an aqueous approach for synthesizing Au and M@Au (M = Pd, CuPt) hybrid nanostars with plasmonic properties

    CERN Document Server

    Du, Jingshan; Xiong, Yalin; Lin, Zhuoqing; Zhang, Hui; Yang, Deren

    2014-01-01

    Anisotropic Au nanoparticles show unique localized surface plasmon resonance (LSPR) properties, which make it attractive in optical, sensing, and biomedical applications. In this contribution, we report a general and facile strategy towards aqueous synthesis of Au and M@Au (M = Pd, CuPt) hybrid nanostars by reducing HAuCl4 with ethanolamine in the presence of cetyltrimethylammonium bromide (CTAB). According to electron microscopic observation and spectral monitoring, we found that the layered epitaxial growth mode (i.e., Frank-van der Merwe mechanism) contributes to the enlargement of the core, while, the random attachment of Au nanoclusters onto the cores accounts for the formation of the branches. Both of them are indispensable for the formation of the nanostars. The LSPR properties of the Au nanoparticles have been well investigated with morphology control via precursor amount and growth temperature. The Au nanostars showed improved surface-enhanced Raman spectroscopy (SERS) performance for rhodamine 6G du...

  6. Un outil de prise de données sur une image numérisée et son utilité dans les études relatives aux poissons : exemple d'une application concrète en morphométrie

    Directory of Open Access Journals (Sweden)

    SAGNES P.

    1995-04-01

    Full Text Available Une configuration informatique polyvalente en analyse d'images est présentée. L'accent est mis sur une application morphométrique par l'intermédiaire d'un exemple concret chez les poissons, d'où ressortent les principales qualités du dispositif, soit la précision et la rapidité de collecte et de stockage des données. Des applications possibles de cet outil à des domaines d'étude précis sont également suggérées.

  7. Preparation of Nanoscrolls by Rolling up Graphene Oxide-Polydopamine-Au Sheets using Lyophilization Method.

    Science.gov (United States)

    Yang, Yongfang; Zhang, Xiaolu; Wang, Hefang; Tang, Honghao; Xu, Lidong; Li, Hua; Zhang, Lei

    2016-06-21

    Graphene oxide-polydopamine-Au (GO-PDA-Au) nanoscrolls were prepared by rolling up GO-PDA-Au sheets through a simple lyophilization method. The structure of GO-PDA-Au nanoscrolls and GO-PDA-Au sheets were compared by powder X-ray diffraction, Raman spectra, transmission electron microscopy, and scanning electron microscopy. The results demonstrated that the heterogeneous GO-PDA-Au nanoscrolls were synthesized successfully. Polydopamine (PDA) attached at the surface of GO sheets served as binding reagents to anchor and disperse Au nanoparticles (NPs). The electrocatalytic activity of methanol with GO-PDA-Au nanoscrolls and GO-PDA-Au sheets as electrodes were conducted. Compared to GO-PDA-Au sheets, GO-PDA-Au nanoscrolls showed better electrocatalytic activity and electrochemical stability owing to their scrolled structure. This article provides a simple and effective method to prepare GO nanoscrolls containing metal NPs that broadens the applications of the graphene-based materials in optical, magnetic, and catalytic fields. PMID:27124218

  8. Charge trapping characteristics of Au nanocrystals embedded in remote plasma atomic layer-deposited Al2O3 film as the tunnel and blocking oxides for nonvolatile memory applications

    International Nuclear Information System (INIS)

    Remote plasma atomic layer deposited (RPALD) Al2O3 films were investigated to apply as tunnel and blocking layers in the metal-oxide-semiconductor capacitor memory utilizing Au nanocrystals (NCs) for nonvolatile memory applications. The interface stability of an Al2O3 film deposited by RPALD was studied to observe the effects of remote plasma on the interface. The interface formed during RPALD process has high oxidation states such as Si+3 and Si+4, indicating that RPALD process can grow more stable interface which has a small amount of fixed oxide trap charge. The significant memory characteristics were also observed in this memory device through the electrical measurement. The memory device exhibited a relatively large memory window of 5.6 V under a 10/-10 V program/erase voltage and also showed the relatively fast programming/erasing speed and a competitive retention characteristic after 104 s. These results indicate that Al2O3 films deposited via RPALD can be applied as the tunnel and blocking oxides for next-generation flash memory devices.

  9. Méthode d'évaluation de l'alignement stratégique des sites web : application au domaine universitaire

    OpenAIRE

    Rebai, Brahim Khalil

    2013-01-01

    The research work presented here was led within the framework of the global project RAUDIN “Recherches Aquitaine sur les Usages pour le Développement des dIspositifs Numériques” (Aquitaine Researches on the Uses for the Development of the Digital devices) and, more specifically, within the sub-project “indicateurs et mesure” (indicators and measure). The objective was to identify the uses of the digital devices and in particular those dispensed via Web applications. It is suggested studying a...

  10. Multifragmentation in Au + Au collisions studied with AMD-V

    International Nuclear Information System (INIS)

    AMD-V is an optimum model for calculation of multifragmentation in Au + Au collisions. AMD-V consider anti-symmetry of incident nucleus, target nucleus and fragments, furthermore, it treat the quantum effect to exist many channels in the intermediate and final state. 150 and 250 MeV/nucleon incident energy were used in the experiments. The data of multifragment atom in 197Au + 197Au collisions was reproduced by AMD-V calculation using Gognny force, corresponding to the imcompressibility of nuclear substance K = 228 MeV and its mean field depend on momentum. When other interaction (SKG 2 force, corresponding to K = 373 KeV) was used an mean field does not depend on momentum, the calculation results could not reproduce the experimental values, because nucleus and deuteron were estimated too large and α-particle and intermediate fragments estimated too small. (S.Y.)

  11. Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes

    OpenAIRE

    Xuemei Zhang; Xu Wu; Anthony Centeno; Ryan, Mary P.; Alford, Neil M.; D. Jason Riley; Fang Xie

    2016-01-01

    Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that u...

  12. Photonique intégrée nonlinéaire sur plate-formes CMOS compatibles pour applications du proche au moyen infrarouge

    OpenAIRE

    Carletti, Luca

    2015-01-01

    La photonique intégrée offre la possibilité d’exploiter un vaste bouquet de phénomènes optique nonlinéaires pour la génération et le traitement de signaux optiques sur des puces très compactes et à des débits potentiels extrêmement rapides. De nouvelles solutions et technologies de composants pourraient être ainsi réalisées, avec un impact considérable pour les applications télécom et datacom. L’utilisation de phénomènes optiques nonlinéaires (e.g. effet Kerr optique, effet Raman) permet même...

  13. Face au risque

    CERN Document Server

    Grosse, Christian; November, Valérie

    2007-01-01

    Ce volume collectif sur le risque inaugure la collection L'ÉQUINOXE. Ancré dans l'histoire pour mesurer les continuités et les ruptures, il illustre la manière dont les sciences humaines évaluent et mesurent les enjeux collectifs du risque sur les plans politiques, scientifiques, énergétiques, juridiques et éthiques. Puisse-t-il nourrir la réflexion sur la culture et la prévention du risque. Ses formes épidémiques, écologiques, sociales, terroristes et militaires nourrissent les peurs actuelles, structurent les projets sécuritaires et constituent - sans doute - les défis majeurs à notre modernité. Dans la foulée de la richesse scientifique d'Equinoxe, L'ÉQUINOXE hérite de son esprit en prenant à son tour le pari de contribuer - non sans risque - à enrichir en Suisse romande et ailleurs le champ éditorial des sciences humaines dont notre société a besoin pour forger ses repères. Après Face au risque suivra cet automne Du sens des Lumières. (MICHEL PORRET Professeur Ordinaire à la F...

  14. La micro-entreprise moyen de lutte contre la pauvreté: mise en évidence par application au niveau des régions tunisiennes = Micro-enterprises are the medium against poverty: Its application in Tunisian regions

    Directory of Open Access Journals (Sweden)

    Makram Gaaliche

    2014-07-01

    Full Text Available Résumé La contribution du secteur des micro-entreprises en Tunisie, dans la lutte contre la pauvreté, s’est manifestée de telle sorte que, tout accroissement du nombre d’unité de micro-entreprise entraîne une réduction du taux de pauvreté. En outre, il s’est avérée que la participation de ces petites unités dans la lutte contre la pauvreté, varie d’une région à une autre, selon le secteur d’activité y exerçantes. La détection d’une telle spécialisation sectorielle au niveau de la lutte contre la pauvreté, permet l’adoption de politiques régionales ciblées, destinées à encourager la création de micro-entreprises, au niveau des secteurs d’activité les plus pertinents. Abstract In Tunisia, the contribution of the microentreprises sector, in the fight against poverty, has appeared so that, every increasing in the number of the microentreprises involves a reduction of the poverty rate. In addition, it proved that the participation of these small unities in the fight against poverty varies from one area to another, according to the activity sectors. The detection of such sectoral specialization on the level of the fight against poverty, allows the adoption of targeted regional policies, intended to encourage the creation of microentreprises, in the most relevant activity sectors.

  15. La micro-entreprise moyen de lutte contre la pauvreté: mise en évidence par application au niveau des régions tunisiennes = Micro-enterprises are the medium against poverty: Its application in Tunisian regions

    Directory of Open Access Journals (Sweden)

    Makram Gaaliche

    2013-12-01

    Full Text Available La contribution du secteur des micro-entreprises en Tunisie, dans la lutte contre la pauvreté, s’est manifestée de telle sorte que, tout accroissement du nombre d’unité de micro-entreprise entraîne une réduction du taux de pauvreté. En outre, il s’est avérée que la participation de ces petites unités dans la lutte contre la pauvreté, varie d’une région à une autre, selon le secteur d’activité y exerçantes. La détection d’une telle spécialisation sectorielle au niveau de la lutte contre la pauvreté, permet l’adoption de politiques régionales ciblées, destinées à encourager la création de micro-entreprises, au niveau des secteurs d’activité les plus pertinents.In Tunisia, the contribution of the microentreprises sector, in the fight against poverty, has appeared so that, every increasing in the number of the microentreprises involves a reduction of the poverty rate. In addition, it proved that the participation of these small unities in the fight against poverty varies from one area to another, according to the activity sectors. The detection of such sectoral specialization on the level of the fight against poverty, allows the adoption of targeted regional policies, intended to encourage the creation of microentreprises, in the most relevant activity sectors.

  16. Simulation d'un systeme de stockage saisonnier de glace pour la climatisation d'un batiment commercial ou institutionnel

    Science.gov (United States)

    Giraldo, Raul Alberto

    The principal goal of this study was to evaluate, using numerical simulation, the feasibility of an air conditioning system, supported by a seasonal ice storage system, installed in a commercial or institutional building. In this regard, the effects of changing several elements around the design of two possible scenarios were modeled in TRNSYS using Matlab® as a programming tool. In the first scenario, the air demanded inside the building passes directly through the ice storage system. In a second scenario, a closed loop pipe full of glycol transports the heat between the ice reservoir and an air cooling coil. First of all, the literature review shows some studies and earlier relevant applications, as well as different solving methods for moving boundary problems in a biphasic medium (waterice). Next, the heat load profile for a typical institutional building in Montreal is determined as a reference point using EE4 and three different methods of solving the boundary motion problem are compared for both, ice training and ice melting. Subsequently, the design parameters are presented for each scenario. This is followed by a description of the programming codes in Matlab® and the components that have been implemented in TRNSYS. Finally, the results involving the heat exchanged and the waterice boundary movements, among others, are collected for one year and for three years. The simulations of both scenarios have also included the experimental variation of some parameters such as the construction area for the ice reservoir, the duration of the ice melting period and other related physical variables. A final analysis of results was followed by an economic study, which considered the changes in initial investment and the potential energy savings for each scenario, compared with a traditional air conditioning unit. This showed that, although research is still needed on many improvements in the design of scenarios and whether its application is limited by several

  17. Electrografting of thionine diazonium cation onto the graphene edges and decorating with Au nano-dendrites or glucose oxidase: Characterization and electrocatalytic applications.

    Science.gov (United States)

    Shervedani, Reza Karimi; Amini, Akbar; Sadeghi, Nima

    2016-03-15

    Thionine (Th) diazonium cation is covalently attached onto the glassy carbon (GC) electrode via graphene nanosheets (GNs) (GC-GNs-Th). The GC-GNs-Th electrode is subjected to further modifications to fabricate (i) glucose and (ii) nitrite sensors. Further modifications include: (i) direct immobilization of glucose oxidase (GOx) and (ii) electrodeposition of gold dendrite-like nanostructures (DGNs) on the GC-GNs-Th surface, constructing GC-GNs-Th-GOx and GC-GNs-Th-DGNs modified electrodes, respectively. The GC-GNs-Th-GOx biosensor exhibited a linear response range to glucose, from 0.5 to 6.0mM, with a limit of detection (LOD) of 9.6 μM and high sensitivity of 43.2 µAcm(-2)mM(-1). Also, the GC-GNs-Th-DGNs sensor showed a wide dynamic response range for NO2(-) ion with two linear parts, from 0.05 μM to 1.0 μM and 30.0 μM to 1.0mM, a sensitivity of 263.2 μAmM(-1) and a LOD of 0.01 μM. Applicability of the modified electrodes was successfully tested by determination of glucose in human blood serum and nitrite in water based on addition/recovery tests. PMID:26454830

  18. Comparative study of anchoring groups for molecular electronics: structure and conductance of Au-S-Au and Au-NH2-Au junctions

    DEFF Research Database (Denmark)

    Kristensen, Iben Sig; Mowbray, Duncan; Thygesen, Kristian Sommer;

    2008-01-01

    selectivity towards atop-gold configurations, S shows large variability in its bonding geometries. As a result, the conductance of the Au-NH2-Au junction is less sensitive to the structure of the gold contacts than the Au-S-Au junction. These findings support recent experiments which show that amine...

  19. Les bases de données : outils de stockage et d'exploitation des échantillonnages piscicoles

    Directory of Open Access Journals (Sweden)

    SANLAVILLE-BOISSON C.

    1995-04-01

    Full Text Available L'étude des relations espèces-environnement à différentes échelles d'espace et de temps impose la manipulation de grands volumes de données et la confrontation de différents types d'informations (biologiques et environnementales. Afin d'optimiser la gestion informatique des données écologiques, plusieurs bases de données (correspondant à des données de structures différentes ont été élaborées sur micro-ordinateur en utilisant des systèmes de gestion de bases de données différents autour desquels ont été développées des applications spécifiques destinées à faciliter et compléter la gestion de l'information, depuis la saisie des données jusqu'à l'obtention des tableaux à analyser.

  20. Heterojunction metal-oxide-metal Au-Fe3O4-Au single nanowire device for spintronics

    International Nuclear Information System (INIS)

    In this report, we present the synthesis of heterojunction magnetite nanowires in alumina template and describe magnetic and electrical properties from a single nanowire device for spintronics applications. Heterojunction Au-Fe-Au nanowire arrays were electrodeposited in porous aluminum oxide templates, and an extensive and controlled heat treatment process converted Fe segment to nanocrystalline cubic magnetite phase with well-defined Au-Fe3O4 interfaces as confirmed by the transmission electron microscopy. Magnetic measurements revealed Verwey transition shoulder around 120 K and a room temperature coercive field of 90 Oe. Current–voltage (I-V) characteristics of a single Au-Fe3O4-Au nanowire have exhibited Ohmic behavior. Anomalous positive magnetoresistance of about 0.5% is observed on a single nanowire, which is attributed to the high spin polarization in nanowire device with pure Fe3O4 phase and nanocontact barrier. This work demonstrates the ability to preserve the pristine Fe3O4 and well defined electrode contact metal (Au)–magnetite interface, which helps in attaining high spin polarized current

  1. Heterojunction metal-oxide-metal Au-Fe{sub 3}O{sub 4}-Au single nanowire device for spintronics

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, K. M., E-mail: mrkongara@boisestate.edu; Punnoose, Alex; Hanna, Charles [Department of Physics, Boise State University, Boise, Idaho 83725 (United States); Padture, Nitin P. [School of Engineering, Brown University, Providence, Rhode Island 02912 (United States)

    2015-05-07

    In this report, we present the synthesis of heterojunction magnetite nanowires in alumina template and describe magnetic and electrical properties from a single nanowire device for spintronics applications. Heterojunction Au-Fe-Au nanowire arrays were electrodeposited in porous aluminum oxide templates, and an extensive and controlled heat treatment process converted Fe segment to nanocrystalline cubic magnetite phase with well-defined Au-Fe{sub 3}O{sub 4} interfaces as confirmed by the transmission electron microscopy. Magnetic measurements revealed Verwey transition shoulder around 120 K and a room temperature coercive field of 90 Oe. Current–voltage (I-V) characteristics of a single Au-Fe{sub 3}O{sub 4}-Au nanowire have exhibited Ohmic behavior. Anomalous positive magnetoresistance of about 0.5% is observed on a single nanowire, which is attributed to the high spin polarization in nanowire device with pure Fe{sub 3}O{sub 4} phase and nanocontact barrier. This work demonstrates the ability to preserve the pristine Fe{sub 3}O{sub 4} and well defined electrode contact metal (Au)–magnetite interface, which helps in attaining high spin polarized current.

  2. Controlled electrodeposition of Au monolayer film on ionic liquid

    Science.gov (United States)

    Ma, Qiang; Pang, Liuqing; Li, Man; Zhang, Yunxia; Ren, Xianpei; Liu, Shengzhong Frank

    2016-05-01

    Gold (Au) nanoparticles have been attractive for centuries for their vibrant appearance enhanced by their interaction with sunlight. Nowadays, there have been tremendous research efforts to develop them for high-tech applications including therapeutic agents, sensors, organic photovoltaics, medical applications, electronics and catalysis. However, there remains to be a challenge to fabricate a monolayer Au coating with complete coverage in controlled fashion. Here we present a facile method to deposit a uniform Au monolayer (ML) film on the [BMIM][PF6] ionic liquid substrate using an electrochemical deposition process. It demonstrates that it is feasible to prepare a solid phase coating on the liquid-based substrate. Moreover, the thickness of the monolayer coating can be controlled to a layer-by-layer accuracy.

  3. History Matching of Production and 4D Seismic Data: Application to the Girassol Field, Offshore Angola Calage simultané des données de production et de sismique 4D : application au champ de Girassol, Offshore Angola

    Directory of Open Access Journals (Sweden)

    Roggero F.

    2012-04-01

    quantitative des données de sismique 4D en modélisation de réservoir. Cette publication propose une méthodologie innovante basée sur des méthodes avancées de calage simultané des modèles 3D de réservoir par les données de production et de sismique 4D. Cette approche intègre dans le même processus de calage d’historique la modélisation géostatistique, les changements d’échelle, la simulation des écoulements et la modélisation pétro-élastique. Les données simulées de production et de sismique 4D sont comparées aux données réelles par l’intermédiaire d’une fonction objectif, qu’un algorithme d’optimisation par ajustement de surface de réponse permet de minimiser. La méthode de déformation graduelle est utilisée pour contraindre globalement ou localement la réalisation en facies du modèle géologique à l’échelle fine. De plus, une nouvelle technique est mise en oeuvre pour mettre à jour les proportions de facies pendant le processus d’optimisation en intégrant les informations de sismique 4D. Une application réalisée avec succès sur le champ de Girassol est présentée. Girassol est un vaste réservoir turbiditique, complexe et faillé, situé dans les grands fonds au large de l’Angola. Un modèle géostatistique détaillé a d’abord été construit pour décrire les hétérogénéités du réservoir à l’échelle géologique fine, en se basant sur les données initiales de sismique 3D. Le modèle a ensuite été contraint par les données de production et de sismique 4D après inversion, en explorant les réalisations géostatistiques par déformation graduelle et en ajustant les proportions de facies. L’intégration des données de sismique 4D a conduit à de meilleures prévisions de production, confirmées par une nouvelle campagne sismique acquise deux ans après la période d’historique initialement considérée. Les données de sismique 4D ont aussi contribué à mieux caractériser la distribution spatiale

  4. Interface effects on tunneling magnetoresistance in organic spintronics with flexible amine-Au links.

    Science.gov (United States)

    Gorjizadeh, Narjes; Quek, Su Ying

    2013-10-18

    Organic spintronics is a promising emerging field, but the sign of the tunneling magnetoresistance (TMR) is highly sensitive to interface effects, a crucial hindrance to applications. A key breakthrough in molecular electronics was the discovery of amine-Au link groups that give a reproducible conductance. Using first-principles calculations, we predict that amine-Au links give improved reproducibility in organic spintronics junctions with Au-covered Fe leads. The Au layers allow only states with sp character to tunnel into the molecule, and the flexibility of amine-Au links results in a narrow range of TMR for a fixed number of Au layers. Even as the Au thickness changes, the TMR remains positive as long as the number of Au layers is the same on both sides of the junction. Since the number of Au layers on Fe surfaces or Fe nanoparticles can now be experimentally controlled, amine-Au links provide a route towards robust TMR in organic spintronics. PMID:24060599

  5. Spherical and polygonal shape of Au nanoparticles coated functionalized polymer microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ting; Li, Yingzhi; Zhang, Junxian; Qi, Yalong; Zhao, Xin; Zhang, Qinghua, E-mail: qhzhang@dhu.edu.cn

    2015-08-01

    Highlights: • PS/PPy with well-defined core/shell structures was prepared in aqueous solution. • Au NPs were coated on PS/PPy by the fixation and continuous growth process. • Mercapto-groups played a role in the number and morphology of Au shell. • PS/PPy/Au had homogeneous and dense Au coatings with different shape. - Abstract: Uniform polystyrene (PS)/polypyrrole (PPy) composite microspheres with well-defined core/shell structures are synthesized by chemical oxidative polymerization. Gold nanoparticles (Au NPs) are successfully coated on the surface of PS/PPy microspheres by means of electrostatic interactions due to the functionalized PPy coatings supplying sufficient amino groups and the additive of mercapto acetic acid. Furthermore, the as-prepared PS/PPy/Au microspheres serving as seeds facilitate Au NPs further growth by in situ reduction in HAuCl{sub 4} solution to obtain PS/PPy/Au spheres with the core/shell/shell structure. Morphology observation demonstrates that the monodisperse PS/PPy/Au microspheres compose of uniform cores and the compact coatings containing distinct two layers. X-ray diffraction and X-ray photoelectron spectroscope confirm the existence of PPy and Au on the surface of the composite spheres. This facile approach to preparing metal-coated polymer spheres supplies the potential applications in biosensors, electronics and medical diagnosis.

  6. Interface effects on tunneling magnetoresistance in organic spintronics with flexible amine–Au links

    International Nuclear Information System (INIS)

    Organic spintronics is a promising emerging field, but the sign of the tunneling magnetoresistance (TMR) is highly sensitive to interface effects, a crucial hindrance to applications. A key breakthrough in molecular electronics was the discovery of amine–Au link groups that give a reproducible conductance. Using first-principles calculations, we predict that amine–Au links give improved reproducibility in organic spintronics junctions with Au-covered Fe leads. The Au layers allow only states with sp character to tunnel into the molecule, and the flexibility of amine–Au links results in a narrow range of TMR for a fixed number of Au layers. Even as the Au thickness changes, the TMR remains positive as long as the number of Au layers is the same on both sides of the junction. Since the number of Au layers on Fe surfaces or Fe nanoparticles can now be experimentally controlled, amine–Au links provide a route towards robust TMR in organic spintronics. (paper)

  7. Low-pressure ETEM Studies of Au assisted MgO Nanorod Growth

    DEFF Research Database (Denmark)

    Wagner, Jakob Birkedal; Duchstein, Linus Daniel Leonhard; Ming, Lin; Damsgaard, Christian Danvad; Hansen, Thomas Willum

    Over the past few decades, there has been an increasing interest in the use of supported nanoparticles in applications ranging from drug delivery to catalysis. The functionality of such nanoparticles is to a large extent controlled by their shape, exposed surface facets and interaction with the...... catalyst nanoparticles in a controlled gas atmosphere, in order to elucidate the mobility of Au surface atoms and the configuration of the Au/MgO interface. The particles are synthesized by depositing a thin layer of Au onto MgO smoke particles. The Au agglomerates into particles that are a few nanometers...

  8. Conception et réalisation de l'unité de décision du système de déclenchement de premier niveau du détecteur LHCb au LHC

    CERN Document Server

    Laubser, Julien

    2007-01-01

    Le detecteur LHCb est l'une des quatre experiences de physique des particules installees sur la nouvelle chaine d'acceleration LHC (Large Hadron Collider) du CERN a Geneve. Afin de reduire la quantite de donnees destinees au stockage pour les analyses hors ligne, un dispositif de selection en ligne des collisions interessantes selon la physique a etudier est mis en place en parallele de la chaine d'acquisition des donnees. Ce dispositif est compose d'un premier niveau(niveau 0) realise par un systeme electronique complexe et d'un second niveau de selection realise par informatique HLT (High Level Trigger). L'unite de decision de niveau 0 (L0DU) est le systeme central du niveau 0 de declenchement. L0DU prend la decision d'accepter ou de rejeter la collision pour ce premier niveau a partir d'une fraction d'informations issues des sous-detecteurs les plus rapides (432 bits a 80 MHz). L'unite de decision est un circuit imprime 16 couches integrant des composants de haute technologie de type FPGA (Field Programmab...

  9. Resonance energy transfer between fluorescent BSA protected Au nanoclusters and organic fluorophores

    Science.gov (United States)

    Raut, Sangram; Rich, Ryan; Fudala, Rafal; Butler, Susan; Kokate, Rutika; Gryczynski, Zygmunt; Luchowski, Rafal; Gryczynski, Ignacy

    2013-12-01

    Bovine serum albumin (BSA) protected nanoclusters (Au and Ag) represent a group of nanomaterials that holds great promise in biophysical applications due to their unique fluorescence properties and lack of toxicity. These metal nanoclusters have utility in a variety of disciplines including catalysis, biosensing, photonics, imaging and molecular electronics. However, they suffer from several disadvantages such as low fluorescence quantum efficiency (typically near 6%) and broad emission spectrum (540 nm to 800 nm). We describe an approach to enhance the apparent brightness of BSA Au clusters by linking them with a high extinction donor organic dye pacific blue (PB). In this conjugate PB acts as a donor to BSA Au clusters and enhances its brightness by resonance energy transfer (RET). We found that the emission of BSA Au clusters can be enhanced by a magnitude of two-fold by resonance energy transfer (RET) from the high extinction donor PB, and BSA Au clusters can act as an acceptor to nanosecond lifetime organic dyes. By pumping the BSA Au clusters using a high extinction donor, one can increase the effective brightness of less bright fluorophores like BSA Au clusters. Moreover, we prepared another conjugate of BSA Au clusters with the near infrared (NIR) dye Dylight 750 (Dy750), where BSA Au clusters act as a donor to Dy750. We observed that BSA Au clusters can function as a donor, showing 46% transfer efficiency to the NIR dye Dy750 with a long lifetime component in the acceptor decay through RET. Such RET-based probes can be used to prevent the problems of a broad emission spectrum associated with the BSA Au clusters. Moreover, transferring energy from BSA Au clusters to Dy750 will result in a RET probe with a narrow emission spectrum and long lifetime component which can be utilized in imaging applications.Bovine serum albumin (BSA) protected nanoclusters (Au and Ag) represent a group of nanomaterials that holds great promise in biophysical applications due to

  10. Photoluminescence enhancement in few-layer WS2 films via Au nanoparticles

    Directory of Open Access Journals (Sweden)

    Sin Yuk Choi

    2015-06-01

    Full Text Available Nano-composites of two-dimensional atomic layered WS2 and Au nanoparticles (AuNPs have been fabricated by sulfurization of sputtered W films followed by immersing into HAuCl4 aqueous solution. The morphology, structure and AuNPs distribution have been characterized by electron microscopy. The decorated AuNPs can be more densely formed on the edge and defective sites of triangle WS2. We have compared the optical absorption and photoluminescence of bare WS2 and Au-decorated WS2 layers. Enhancement in the photoluminescence is observed in the Au-WS2 nano-composites, attributed to localized surface plasmonic effect. This work provides the possibility to develop photonic application in two-dimensional materials.

  11. Genome Wide Transcriptome Analysis reveals ABA mediated response in Arabidopsis during Gold (AuCl4-) treatment

    OpenAIRE

    Devesh eShukla; Sneha eKrishnamurthy; Shivendra Vikram Sahi

    2014-01-01

    The unique physico-chemical properties of gold nanoparticles (AuNPs) find manifold applications in diagnostics, medicine and catalysis. Chemical synthesis produces reactive AuNPs and generates hazardous by-products. Alternatively, plants can be utilized to produce AuNPs in an eco-friendly manner. To better control the biosynthesis of AuNPs, we need to first understand the detailed molecular response induced by AuCl4- In this study, we carried out global transcriptome analysis in root tissue ...

  12. Genome wide transcriptome analysis reveals ABA mediated response in Arabidopsis during gold (AuCl− 4) treatment

    OpenAIRE

    Shukla, Devesh; Krishnamurthy, Sneha; Shivendra V. Sahi

    2014-01-01

    The unique physico-chemical properties of gold nanoparticles (AuNPs) find manifold applications in diagnostics, medicine and catalysis. Chemical synthesis produces reactive AuNPs and generates hazardous by-products. Alternatively, plants can be utilized to produce AuNPs in an eco-friendly manner. To better control the biosynthesis of AuNPs, we need to first understand the detailed molecular response induced by AuCl− 4 In this study, we carried out global transcriptome analysis in root tissue ...

  13. Genome wide transcriptome analysis reveals ABA mediated response in Arabidopsis during gold (AuCl−4) treatment

    OpenAIRE

    Shukla, Devesh; Krishnamurthy, Sneha; Shivendra V. Sahi

    2014-01-01

    The unique physico-chemical properties of gold nanoparticles (AuNPs) find manifold applications in diagnostics, medicine and catalysis. Chemical synthesis produces reactive AuNPs and generates hazardous by-products. Alternatively, plants can be utilized to produce AuNPs in an eco-friendly manner. To better control the biosynthesis of AuNPs, we need to first understand the detailed molecular response induced by AuCl−4 In this study, we carried out global transcriptome analysis in root tissue o...

  14. Biological synthesis of Au nanoparticles using liquefied mash of cassava starch and their functionalization for enhanced hydrolysis of xylan by recombinant xylanase.

    Science.gov (United States)

    Zeng, Sumei; Du, Liangwei; Huang, Meiying; Feng, Jia-Xun

    2016-05-01

    Au nanoparticles (AuNPs) have shown the potential for a variety of applications due to their unique physical and chemical properties. In this study, a facile and affordable method for the synthesis of AuNPs via the liquefied mash of cassava starch has been described and the functionalized AuNPs by L-cysteine improved activity of recombinant xylanase was demonstrated. UV-Vis absorption spectroscopy, transmission electron microscopy, and zeta potential measurements were performed to characterize the AuNPs and monitor their synthesis. The presence of Au was confirmed by energy-dispersive X-ray spectroscopy (EDX) and the X-ray diffraction patterns showed that Au nanocrystals were face-centered cubic. The C=O stretching vibration in the Fourier transform infrared spectrum of AuNPs suggested that the hemiacetal C-OH of sugar molecules performed the reduction of Au(3+) to Au(0). The presence of C and O in the EDX spectrum and the negative zeta potential of AuNPs suggested that the biomolecules present in liquefied cassava mash were responsible for the stabilization of AuNPs. The surface of AuNPs was easily functionalized by L-cysteine, which improved the stability of AuNPs. Moreover, cysteine-functionalized AuNPs could significantly improve recombinant xylanase efficiency and stability. PMID:26864877

  15. L’apprentissage au cern

    CERN Multimedia

    2007-01-01

    pour les professions d’électronicien(ne) et de laborantin(e) en physique L’apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le canton de Genève. En cas de réussite à l’examen de fin d’apprentissage, les apprentis obtiennent le Certificat fédéral de capacité suisse (CFC). 6 places au total sont ouvertes au recrutement pour les deux professions. L’apprentissage dure 4 ans. Minima requis pour faire acte de candidature : avoir au moins 15 ans et moins de 21 ans à la date de début de l’apprentissage ; avoir terminé la scolarité obligatoire, au minimum 9e du Cycle d’orientation genevois (3e en France) ; être ressortissant d’un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, Royaume-Uni, République tchèque, République slovaque , Suède, Suisse) ; pour les résidents en Suisse : être ressortissant su...

  16. Flow in Au+Au collisions at RHIC

    Science.gov (United States)

    Belt Tonjes, Marguerite; PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Holynski, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wolfs, F. L. H.; Wosiek, B.; Wozniak, K.; Wuosmaa, A. H.; Wyslouch, B.

    2004-08-01

    The study of flow can provide information on the initial state dynamics and the degree of equilibration attained in heavy-ion collisions. This contribution presents results for both elliptic and directed flow as determined from data recorded by the PHOBOS experiment in Au+Au runs at RHIC at \\sqrt{s_{{\\rm NN}}} = 19.6, 130 and 200 GeV. The PHOBOS detector provides a unique coverage in pseudorapidity for measuring flow at RHIC. The systematic dependence of flow on pseudorapidity, transverse momentum, centrality and energy is discussed.

  17. Application of Alkaline Waterflooding to a High Acidity Crude Oil Application de l'injection d'eau alcaline au cas d'un pétrole brut à forte acidité

    Directory of Open Access Journals (Sweden)

    Abdel-Waly A.

    2006-11-01

    Full Text Available The main objective of this work was to study the enhanced recovery of a high acidity crude oil (South Geisum crude by alkaline solutions. Different properties of South Geisum crude oil, namely acidity, interfacial tension, and contact angle, were investigated. Displacement tests were carried out to study the effect of alkaline slug concentration, slug size, oil alkali type, and temperature viscosity on recovery. South Geisum crude oil is a highly acidic crude (4. 38 mg KOH/g. It was found that the interfacial tension between crude oil and formation water decreases with increasing alkaline concentration until it reaches a minimum, after which it increases again with a further increase in alkaline concentration. Interfacial tension between crude oil and displacement water also decreases with increasing alkaline concentration. Contact angle measurements indicated oil-wetting conditions that increase by the addition of alkaline solutions. Displacement floods showed that, at the early stages of displacement, oil recovery increases with increasing alkaline concentration until it reaches a maximum at 4 % by weight NaOH concentration. Also, at such early stages, an excessive increase in alkaline concentration results in lower oil recovery. On the other hand, after the injection of many pore volumes of water, oil recovery is almost the same regardless of the alkaline concentration. It was found also that oil recovery increases with increasing alkaline slug size until it reaches a maximum at 15 % PV, after which increasing slug size results in decreasing oil recovery (this result has not as yet been reported in the literature. Sodium hydroxide slugs produce more oil recovery than sodium carbonate slugs. Oil recovery increases with increasing temperature (from 25 to 55°C and decreasing oil viscosity. Cet article traite de la récupération, au moyen de solutions alcalines, d'un pétrole brut à forte acidité (brut de Geisum-Sud. Différentes propri

  18. Graphene nanoribbons synthesized from molecular precursor polymerization on Au(110)

    International Nuclear Information System (INIS)

    A spectroscopic study of 10,10-dibromo-9,9 bianthracene (DBBA) molecules deposited on the Au(110) surface is presented, by means of ultraviolet and X-ray photoemission, and X-ray absorption spectroscopy. Through a thermally activated procedure, these molecular precursors polymerize and eventually form graphene nanoribbons (GNRs) with atomically controlled shape and width, very important building blocks for several technological applications. The GNRs observed by scanning tunneling microscopy (STM) appear as short segments on top of the gold surface reconstruction, pointing out the delicate balance among surface diffusion and surface corrugation in their synthesis on the Au(110) surface

  19. Graphene nanoribbons synthesized from molecular precursor polymerization on Au(110)

    Energy Technology Data Exchange (ETDEWEB)

    Massimi, Lorenzo; Ourdjini, Oualid; Della Pia, Ada; Mariani, Carlo; Betti, Maria Grazia [Dipartimento di Fisica, Università di Roma La Sapienza, Piazzale Aldo Moro 2, I - 00185 Roma (Italy); Cavaliere, Emanuele; Gavioli, Luca [i-LAMP & Dipartimento di Matematica e Fisica, Università Cattolica, 25121 Brescia (Italy)

    2015-06-23

    A spectroscopic study of 10,10-dibromo-9,9 bianthracene (DBBA) molecules deposited on the Au(110) surface is presented, by means of ultraviolet and X-ray photoemission, and X-ray absorption spectroscopy. Through a thermally activated procedure, these molecular precursors polymerize and eventually form graphene nanoribbons (GNRs) with atomically controlled shape and width, very important building blocks for several technological applications. The GNRs observed by scanning tunneling microscopy (STM) appear as short segments on top of the gold surface reconstruction, pointing out the delicate balance among surface diffusion and surface corrugation in their synthesis on the Au(110) surface.

  20. Reliable methods for silica coating of Au nanoparticles.

    Science.gov (United States)

    Pastoriza-Santos, Isabel; Liz-Marzán, Luis M

    2013-01-01

    The inherent properties of silica, such as optical transparency, high biocompatibility, chemical and colloidal stability, controllable porosity, and easy surface modification, provide silica materials with a tremendous potential in biomedicine. Therefore, the coating of Au nanoparticles with silica largely contributes to enhance the important applications of metal nanoparticles in biomedicine. We describe in this chapter a number of reliable strategies that have been reported for silica coating of different types of Au nanoparticles. All descriptions are based on tested protocols and are expected to provide a reference for scientists with an interest in this field. PMID:23918330

  1. Bitumen coating of the radio-active sludges from the effluent treatment plant at the Marcoule centre. Review of the progress reports 1, 2, 3 and 4 (1963); Enrobage par le bitume des boues radioactives de la station de traitement des effluents du centre de Marcoule. Mise au point des etats d'avancement 1, 2, 3 et 4. (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J.; Lefillatre, G.; Scheidhauer, J. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1963-07-01

    Besides the very high activity liquids containing fission products, the chemical treatment of irradiated fuels produces a large volume of aqueous effluents and solid waste of relatively low radioactivity. These weakly active products can be eliminated in the ground, in a hydrographic land system or in the sea. Techniques of evaporation, of resin concentration, and of coprecipitation give rise to inorganic sludges with a high water content. All these residues occupy a large volume and represent a far from negligible weight. In the case of the sludge, their relative fluidity necessitates a conditioning guaranteeing safe storage. The solution to the problem will consist in passing directly from a liquid or a suspension, to a solid whose structure is homogeneous and whose matter is inert with respect to the storage medium (soil, sea, etc. ). We have proposed to coat the radioactive products with bitumen. This article is designed to give a review of the studies undertaken on this method. It consists of a progress report rather than a final assessment. (authors) [French] En dehors des liquides de tres haute activite contenant des produits de fission, le traitement chimique des combustibles irradies produit un volume important d'effluents aqueux et de residus solides de radioactivite relativement faible. Ces produits, faiblement actifs, peuvent etre elimines dans le sol, dans un systeme hydrographique terrestre ou dans la mer. Les techniques d'evaporation, de concentration sur resine, de coprecipitation, permettent la decontamination prealable des liquides. La coprecipitation donne naissance a des boues minerales dont la teneur en eau est elevee. Tous ces residus occupent un volume important et representent un poids non negligeable. Dans le cas des boues, leur fluidite relative exige un conditionnement donnant toutes garanties de securite au stockage. La solution du probleme consistera a passer directement d'un liquide ou d'une suspension a un solide

  2. Multiscale Modeling of Au-Island Ripening on Au(100

    Directory of Open Access Journals (Sweden)

    Karin Kleiner

    2011-01-01

    Full Text Available We describe a multiscale modeling hierarchy for the particular case of Au-island ripening on Au(100. Starting at the microscopic scale, density functional theory was used to investigate a limited number of self-diffusion processes on perfect and imperfect Au(100 surfaces. The obtained structural and energetic information served as basis for optimizing a reactive forcefield (here ReaxFF, which afterwards was used to address the mesoscopic scale. Reactive force field simulations were performed to investigate more diffusion possibilities at a lower computational cost but with similar accuracy. Finally, we reached the macroscale by means of kinetic Monte Carlo (kMC simulations. The reaction rates for the reaction process database used in the kMC simulations were generated using the reactive force field. Using this strategy, we simulated nucleation, aggregation, and fluctuation processes for monoatomic high islands on Au(100 and modeled their equilibrium shape structures. Finally, by calculating the step line tension at different temperatures, we were able to make a direct comparison with available experimental data.

  3. La durabilité des géosynthétiques dans les installations de stockage de déchets : le projet Durageos DURAGEOS. Durability of geosynthetics used in landfills

    Directory of Open Access Journals (Sweden)

    FARCAS, Fabienne ; PONS, Carlos ; BOUCHEZ, Théodore ; MAZÉAS, Laurent ; MÉRY, Jacques ; TOUZE-FOLTZ, Nathalie ; DURRIEU, Claude ; FAYOLLE, Bruno ; RICHAUD, Emmanuel ; LANOË, Marie ; MARTINS, Jean ; PIERSON, Patrick ; SALDI, Fethi

    2012-08-01

    Full Text Available Les géosynthétiques sont de plus en plus utilisés pour renforcer les barrières d'étanchéité des installations de stockage des déchets non dangereux. Afin de réduire l'impact environnemental des installations, les utilisateurs de ces matériaux ont donc besoin de guides et de recommandations sur leur mise en œuvre délicate, mais également d'estimations sur leur durée de vie. Cet article nous présente les moyens mis en œuvre par le projet Durageos pour mieux connaître et prédire les processus de vieillissement des géomembranes en polyéthylène haute densité et des géosynthétiques bentonitiques.The DURAGEOS project studies geosynthetics (HDPE geomembranes and GCLs ageing mechanisms under combined action of mechanical stresses, microorganisms and/or oxygen in connection with mass transfer. Physico-chemical and mechanical features of model and commercial geosynthetics aged in laboratory allow the development of a kinetic model of prediction of the lifetime coupled to a model of mass transfer. The models will be validated by geosynthetics sampled on landfill sites. Ecotoxicological risks and environmental external costs of transfers are to be assessed.

  4. Plasmonic Fano resonances in compositional heterogenous Al- Au nanorod dimers

    Science.gov (United States)

    Wu, Botao; Xue, Yingxian; Ma, Qiang; Ding, Chengjie; Rong, Youying; Liu, Yan; Chen, Lingxiao; Wu, E.; Zeng, Heping

    2016-01-01

    We have investigated theoretically the plasmon resonance coupling in compositional heterogenous Al-Au nanorod dimers organized in a close proximity by end-to-end. It has been proved that the destructive interference between the bright dipole mode from Al nanorod and the dark quadrupole mode from Au nanorod nearby results in the appearance of apparent Fano resonance in the extinction spectra. The Fano resonance response on the structural dimension modifications in the proposed nanorod dimers have been estimated and determined. The Al-Au heterogeneous nanorod dimer shows a high sensitivity to the surrounding environment with a local surface plasmon resonance figure of merit of 7.6, which enables its promising applications in plasmonic sensing and detection.

  5. 纳米金银材料在比色检测汞中的应用%The Application of Au-Ag Nanomaterials in the Colorimetric Detection of Mercury

    Institute of Scientific and Technical Information of China (English)

    李红红; 陈兴国

    2012-01-01

    It is very important to develop accurate methods for the determination of trace mercury due to its extremely hazardous and bioconcentration effect on human health and the environment. The conventional detection methods for Hg( II ) , such as Atomic Spectrometry, Inductively Coupled Plasma-Mass Spectrometry, Electrochemical Analysis and Spectrophotometry, require complex sample preparation, expensive instruments, and lengthy analysis, which cannot meet the needs of the actual analysis. The colorimetric method has been widely applied for detecting Hg( JJ ) , but the sensitivity and selectivity are still difficult to measure trace Hg( TJ ) in acomplex matrix. In recent years, nanomaterials of gold ( Au) or silver ( Ag) have attracted the attention of many researchers in the application of colorimetric detection for Hg( II ) because of their unique surface plasmon resonance, and many new methods have been successfully applied to detecting trace Hg( E ) in actual samples. The main colorimetric detection mechanism of Au/Ag nanomaterials is based on the fact that Hg( II ) could cause the aggregation/redispersion or the redox reaction, which induces a color change in the solution. This method has been applied successfully to water samples, however, large interferences exist for other kinds of samples. In this paper, the theory and research progress of Au and Ag nanomaterials in the colorimetric detection of Hg( II ) are reviewed. This is a new direction for establishing a simple, rapid, highly sensitive and highly selective colorimetric detection method for trace Hg( H ) measurements in complex samples in the future.%汞具有生物富集性和剧毒性,对人体健康和环境产生严重的危害和影响,因此开发准确测定样品中微量汞的方法具有重要的实际意义.原子光谱法、电感耦合等离子体质谱法、电化学分析法、分光光度法等测定Hg(Ⅱ)的传统方法,由于存在样品预处理过程复杂、仪器昂贵、分析周

  6. Size-tunable Au nanoparticles on MoS2(0001)

    Science.gov (United States)

    Chu, Xinjun; Yao, Guanggeng; Thye Shen Wee, Andrew; Wang, Xue-Sen

    2012-09-01

    Ultra-fine Au nanoparticles (NPs) show great application potential in catalysis. Size-tunable Au NPs have been fabricated on MoS2 covered with monolayer 3,4,5,10-perylene tetracarboxylic dianhydride (PTCDA), and the morphological evolution as a function of Au deposition amount was investigated using scanning tunneling microscopy (STM). The PTCDA molecules act as a surfactant to stabilize ultra-fine Au NPs. Molecular scale STM images show that on MoS2 the Au NPs with PTCDA molecules on top can be formed with height and lateral size down to 1.3 nm and 3.5 nm, respectively. By controlling the deposition amount and annealing temperature, the size of Au NPs can be tuned. After annealing at 270 °C to remove PTCDA, Au NPs with a linear size ≤5 nm can be obtained on MoS2(0001), facilitating the characterization of their intrinsic physical and chemical properties using various analytical techniques. In addition, photoemission spectroscopy data reveal charge transfer from Au NPs to PTCDA, indicating that the NPs possess more reactive chemical properties than bulk Au.

  7. Size-tunable Au nanoparticles on MoS2(0001)

    International Nuclear Information System (INIS)

    Ultra-fine Au nanoparticles (NPs) show great application potential in catalysis. Size-tunable Au NPs have been fabricated on MoS2 covered with monolayer 3,4,5,10-perylene tetracarboxylic dianhydride (PTCDA), and the morphological evolution as a function of Au deposition amount was investigated using scanning tunneling microscopy (STM). The PTCDA molecules act as a surfactant to stabilize ultra-fine Au NPs. Molecular scale STM images show that on MoS2 the Au NPs with PTCDA molecules on top can be formed with height and lateral size down to 1.3 nm and 3.5 nm, respectively. By controlling the deposition amount and annealing temperature, the size of Au NPs can be tuned. After annealing at 270 °C to remove PTCDA, Au NPs with a linear size ≤5 nm can be obtained on MoS2(0001), facilitating the characterization of their intrinsic physical and chemical properties using various analytical techniques. In addition, photoemission spectroscopy data reveal charge transfer from Au NPs to PTCDA, indicating that the NPs possess more reactive chemical properties than bulk Au. (paper)

  8. Relative Distribution of Au48+ ~ Au52+ in Au Plasma by Ionization Dynamics

    Institute of Scientific and Technical Information of China (English)

    ZHU Zhi-Yan; ZHU Zheng-He; JIANG Gang

    2003-01-01

    The present work proposes a theoretical method called ionization dynamics to derive the ionic charge state distribution. Using relativistic quantum mechanics to calculate the energy level lifetime and average ionic lifetime of each ion, the first-order ionization rate constant can be obtained. Based on these data, from the solution of differential equations for consecutive-irreversible ionization reactions, one will be able to derive the ionic charge state distribution.The calculated average positive charge 49.24 of Au48+ ~ Au52+ and their relative distribution are in good agreement with the results of Lawrence Livermore National Laboratory.

  9. Tunneling characteristics of Au-alkanedithiol-Au junctions formed via nanotransfer printing (nTP).

    Science.gov (United States)

    Niskala, Jeremy R; Rice, William C; Bruce, Robert C; Merkel, Timothy J; Tsui, Frank; You, Wei

    2012-07-25

    Construction of permanent metal-molecule-metal (MMM) junctions, though technically challenging, is desirable for both fundamental investigations and applications of molecule-based electronics. In this study, we employed the nanotransfer printing (nTP) technique using perfluoropolyether (PFPE) stamps to print Au thin films onto self-assembled monolayers (SAMs) of alkanedithiol formed on Au thin films. We show that the resulting MMM junctions form permanent and symmetrical tunnel junctions, without the need for an additional protection layer between the top metal electrode and the molecular layer. This type of junction makes it possible for direct investigations into the electrical properties of the molecules and the metal-molecule interfaces. Dependence of transport properties on the length of the alkane molecules and the area of the printed Au electrodes has been examined systematically. From the analysis of the current-voltage (I-V) curves using the Simmons model, the height of tunneling barrier associated with the molecule (alkane) has been determined to be 3.5 ± 0.2 eV, while the analysis yielded an upper bound of 2.4 eV for the counterpart at the interface (thiol). The former is consistent with the theoretical value of ~3.5-5.0 eV. The measured I-V curves show scaling with respect to the printed Au electrode area with lateral dimensions ranging from 80 nm to 7 μm. These results demonstrate that PFPE-assisted nTP is a promising technique for producing potentially scalable and permanent MMM junctions. They also demonstrate that MMM structures (produced by the unique PFPE-assisted nTP) constitute a reliable test bed for exploring molecule-based electronics. PMID:22720785

  10. Final Technical Report: First Principles Investigations for the Ensemble Effects of PdAu and PtAu Bimetallic Nanocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ruqian Wu

    2012-05-18

    Bimetallic surfaces with tunable chemical properties have attracted broad attention in recent years due to their ample potential for heterogeneous catalysis applications. The local chemical properties of constituents are strongly altered from their parent metals by 'ligand effect', a term encompassing the influences of charge transfer, orbital rehybridization and lattice strain. In comparison to the aforementioned, the 'ensemble effect' associated with particular arrangements of the active constituents have received much less attention, despite their notable importance towards the determination of reactivity and selectivity of bimetallic catalysts. We performed theoretical studies for understanding the ensemble effects on bimetallic catalysis: (i) simulations for the formation of different ensembles on PdAu and PtAu nanoclusters; (ii) studies of the size, shape, and substrate dependence of their electronic properties; and (iii) simulations for model reactions such as CO oxidation, methanol, ethylene and water dehydrogenation on PdAu and PtAu nanoclusters. In close collaboration with leading experimental groups, our theoretical research elucidated the fundamentals of Au based bimetallic nanocatalysts.

  11. One-step facile synthesis of carbon-supported PdAu nanoparticles and their electrochemical property and stability

    International Nuclear Information System (INIS)

    Graphical abstract: Well-crystallized PdAu alloy nanoparticles with the average size of 2–5 nm supported on Ketjen Black (KB) were successfully fabricated from the metal wire electrodes via a one-step solution plasma process in water at atmospheric pressure. Multi-scan cyclic voltammetry showed they have better electrochemical stability in alkaline than in acidic solution. - Highlights: • Carbon-supported PdAu nanoparticles were fabricated by a solution plasma technique. • As-obtained PdAu nanoparticles were confirmed to be alloy. • PdAu nanoparticles have good electrochemical activities and stabilities. • PdAu nanoparticles in alkaline have better stability than that in acidic solution. - Abstract: Well-crystallized PdAu nanoparticles supported on Ketjen Black (KB) were successfully fabricated when both Pd and Au wires were served as the electrode pair by a solution plasma technique at atmospheric pressure. The synthesis of PdAu nanoparticles was almost simultaneous with their dispersion on KB. As-obtained PdAu nanoparticles were confirmed to be alloy by ultraviolet–visible spectrophotometer, transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDX) of each particle. PdAu nanoparticles with the average diameter of 2–5 nm were equably distributed on KB. PdAu nanoparticles showed good electrocatalytic activity both in acidic and alkaline solution corresponding to their obvious oxidation and reduction features. PdAu nanoparticles have improved electrochemical stability compared with the electrochemical properties of Pd and Au nanoparticles mixture after long time multi-scan cyclic voltammetry. Multi-scan cyclic voltammetry also presented the PdAu nanoparticles in alkaline solution have better stability than that in acidic solution. Thus as-obtained PdAu alloy nanoparticles would become a promising electrocatalysts for fuel cells or Li-air batteries. This novel process showed its potential applications in designing optimization of

  12. One-step facile synthesis of carbon-supported PdAu nanoparticles and their electrochemical property and stability

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Xiulan, E-mail: whoxiulan@163.com [College of Materials Science and Engineering, Nanjing Tech University (China); Shi, Junjun; Zhang, Jianbo [College of Materials Science and Engineering, Nanjing Tech University (China); Tang, Weiping [Shanghai Institute of Space Power Sources, Shanghai (China); Zhu, Haikui; Shen, Xiaodong [College of Materials Science and Engineering, Nanjing Tech University (China); Saito, Nagahiro [Department of Materials, Physics and Energy Engineering, Graduate School of Engineering, Nagoya University (Japan)

    2015-01-15

    Graphical abstract: Well-crystallized PdAu alloy nanoparticles with the average size of 2–5 nm supported on Ketjen Black (KB) were successfully fabricated from the metal wire electrodes via a one-step solution plasma process in water at atmospheric pressure. Multi-scan cyclic voltammetry showed they have better electrochemical stability in alkaline than in acidic solution. - Highlights: • Carbon-supported PdAu nanoparticles were fabricated by a solution plasma technique. • As-obtained PdAu nanoparticles were confirmed to be alloy. • PdAu nanoparticles have good electrochemical activities and stabilities. • PdAu nanoparticles in alkaline have better stability than that in acidic solution. - Abstract: Well-crystallized PdAu nanoparticles supported on Ketjen Black (KB) were successfully fabricated when both Pd and Au wires were served as the electrode pair by a solution plasma technique at atmospheric pressure. The synthesis of PdAu nanoparticles was almost simultaneous with their dispersion on KB. As-obtained PdAu nanoparticles were confirmed to be alloy by ultraviolet–visible spectrophotometer, transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDX) of each particle. PdAu nanoparticles with the average diameter of 2–5 nm were equably distributed on KB. PdAu nanoparticles showed good electrocatalytic activity both in acidic and alkaline solution corresponding to their obvious oxidation and reduction features. PdAu nanoparticles have improved electrochemical stability compared with the electrochemical properties of Pd and Au nanoparticles mixture after long time multi-scan cyclic voltammetry. Multi-scan cyclic voltammetry also presented the PdAu nanoparticles in alkaline solution have better stability than that in acidic solution. Thus as-obtained PdAu alloy nanoparticles would become a promising electrocatalysts for fuel cells or Li-air batteries. This novel process showed its potential applications in designing optimization of

  13. Synthesis of Au microwires by selective oxidation of Au–W thin-film composition spreads

    Directory of Open Access Journals (Sweden)

    Sven Hamann, Hayo Brunken, Steffen Salomon, Robert Meyer, Alan Savan and Alfred Ludwig

    2013-01-01

    Full Text Available We report on the stress-induced growth of Au microwires out of a surrounding Au–W matrix by selective oxidation, in view of a possible application as 'micro-Velcro'. The Au wires are extruded due to the high compressive stress in the tungsten oxide formed by oxidation of elemental W. The samples were fabricated as a thin-film materials library using combinatorial sputter deposition followed by thermal oxidation. Sizes and shapes of the Au microwires were investigated as a function of the W to Au ratio. The coherence length and stress state of the Au microwires were related to their shape and plastic deformation. Depending on the composition of the Au–W precursor, the oxidized samples showed regions with differently shaped Au microwires. The Au48W52 composition yielded wires with the maximum length to diameter ratio due to the high compressive stress in the tungsten oxide matrix. The values of wire length (35 μm and diameter (2 μm achieved at the Au48W52 composition are suitable for micro-Velcro applications.

  14. Onset of nuclear matter expansion in Au+Au collisions

    CERN Document Server

    Crochet, Philippe; Gobbi, A; Donà, R; Coffin, J P; Fintz, P; Guillaume, G; Jundt, F; Kühn, C E; Roy, C; De Schauenburg, B; Tizniti, L; Wagner, P; Alard, J P; Amouroux, V; Andronic, A; Basrak, Z; Bastid, N; Belyaev, I; Best, D; Biegansky, J; Butà, A; Caplar, R; Cindro, N; Dupieux, P; Dzelalija, M; Fan, Z G; Fodor, Z; Fraysse, L; Freifelder, R P; Herrmann, N; Hildenbrand, K D; Hong, B H; Jeong, S C; Kecskeméti, J; Kirejczyk, M; Koncz, P; Korolija, M; Kotte, R; Lebedev, A; Leifels, Y; Man'ko, V I; Moisa, D; Mösner, J; Neubert, W; Pelte, D; Petrovici, M; Pinkenburg, C H; Pras, P; Ramillien, V; Reisdorf, W; Ritman, J L; Sadchikov, A G; Schüll, D; Seres, Z; Sikora, B; Simion, V; Siwek-Wilczynska, K; Sodan, U; Teh, K M; Trzaska, M; Vasilev, M A; Wang, G S; Wessels, J P; Wienold, T; Wisniewski, K; Wohlfarth, D; Zhilin, A V

    1997-01-01

    Using the FOPI detector at GSI Darmstadt, excitation functions of collective flow components were measured for the Au+Au system, in the reaction plane and out of this plane, at seven incident energies ranging from 100AMeV to 800AMeV. The threshold energies, corresponding to the onset of sideward-flow (balance energy) and squeeze-out effect (transition energy), are extracted from extrapolations of these excitation functions toward lower beam energies for charged products with Z>2. The transition energy is found to be larger than the balance energy. The impact parameter dependence of both balance and transition energies, when extrapolated to central collisions, suggests comparable although slightly higher values than the threshold energy for the radial flow. The relevant parameter seems to be the energy deposited into the system in order to overcome the attractive nuclear forces.

  15. Nuclear Modification of Jet Fragmentation in Au+Au Collisions

    Science.gov (United States)

    Rowan, Zachary; Phenix Collaboration

    2015-10-01

    The characterization of energy in the quark gluon plasma is facilitated by measurements of modifications to the observed jet fragmentation. A favorable channel of study relies on direct photons created in the initial parton interactions of heavy ion collisions. Such a photon traverses the created medium unscathed and grants us a proxy for the transverse momentum of an away side jet. PHENIX Au+Au data recorded at √{sNN} = 200 GeV during RHIC run 14 benefit from the background rejection capability of the silicon vertex detector, enabling the extraction of a higher purity hadron signal. This advantage, combined with a larger integrated luminosity, allows previous PHENIX measurements of fragmentation functions to be extended to greater jet energies. In this talk, the status of the analysis of direct photon hadron correlations with the new data set will be discussed.

  16. Global polarization measurement in Au+Au collisions

    CERN Document Server

    Abelev, B I; Ahammed, Z; Anderson, B D; Arkhipkin, D; Averichev, G S; Bai, Y; Balewski, J; Barannikova, O; Barnby, L S; Baudot, J; Baumgart, S; Belaga, V V; Bellingeri-Laurikainen, A; Bellwied, R; Benedosso, F; Betts, R R; Bhardwaj, S; Bhasin, A; Bhati, A K; Bichsel, H; Bielcik, J; Bielcikova, J; Bland, L C; Blyth, S L; Bombara, M; Bonner, B E; Botje, M; Bouchet, J; Brandin, A V; Bravar, A; Burton, T P; Bystersky, M; Cai, X Z; Caines, H; Calderón de la Barca-Sanchez, M; Callner, J; Catu, O; Cebra, D; Chajecki, Z; Chaloupka, P; Chattopadhyay, S; Chen, H F; Chen, J H; Chen, J Y; Cheng, J; Cherney, M; Chikanian, A; Christie, W; Chung, S U; Coffin, J P; Cormier, T M; Cosentino, M R; Cramer, J G; Crawford, H J; Das, D; Dash, S; Daugherity, M; De Moura, M M; Dedovich, T G; De Phillips, M; Derevshchikov, A A; Didenko, L; Dietel, T; Djawotho, P; Dogra, S M; Dong, X; Drachenberg, J L; Draper, J E; Du, F; Dunin, V B; Dunlop, J C; Dutta-Majumdar, M R; Eckardt, V; Edwards, W R; Efimov, L G; Emelianov, V; Engelage, J; Eppley, G; Erazmus, B; Estienne, M; Fachini, P; Fatemi, R; Fedorisin, J; Feng, A; Filip, P; Finch, E; Fine, V; Fisyak, Yu; Fu, J; Gagliardi, C A; Gaillard, L; Ganti, M S; García-Solis, E; Ghazikhanian, V; Ghosh, P; Gorbunov, Y N; Gos, H; Grebenyuk, O; Grosnick, D; Grube, B; Guertin, S M; Guimaraes, K S F F; Gupta, N; Haag, B; Hallman, T J; Hamed, A; Harris, J W; He, W; Heinz, M; Henry, T W; Heppelmann, S; Hippolyte, B; Hirsch, A; Hjort, E; Hoffman, A M; Hoffmann, G W; Hofman, D J; Hollis, R S; Horner, M J; Huang, H Z; Hughes, E W; Humanic, T J; Igo, G; Iordanova, A; Jacobs, P; Jacobs, W W; Jakl, P; Jia, F; Jones, P G; Judd, E G; Kabana, S; Kang, K; Kapitan, J; Kaplan, M; Keane, D; Kechechyan, A; Kettler, D; Khodyrev, V Yu; Kiryluk, J; Kisiel, A; Kislov, E M; Klein, S R; Knospe, A G; Kocoloski, A; Koetke, D D; Kollegger, T; Kopytine, M; Kotchenda, L; Kouchpil, V; Kowalik, K L; Kravtsov, P; Kravtsov, V I; Krüger, K; Kuhn, C; Kulikov, A I; Kumar, A; Kurnadi, P; Kuznetsov, A A; Lamont, M A C; Landgraf, J M; Lange, S; La Pointe, S; Laue, F; Lauret, J; Lebedev, A; Lednicky, R; Lee, C H; Lehocka, S; Le Vine, M J; Li, C; Li, Q; Li, Y; Lin, G; Lin, X; Lindenbaum, S J; Lisa, M A; Liu, F; Liu, H; Liu, J; Liu, L; Ljubicic, T; Llope, W J; Longacre, R S; Love, W A; Lu, Y; Ludlam, T; Lynn, D; Ma, G L; Ma, J G; Ma, Y G; Mahapatra, D P; Majka, R; Mangotra, L K; Manweiler, R; Margetis, S; Markert, C; Martin, L; Matis, H S; Matulenko, Yu A; McClain, C J; McShane, T S; Melnik, Yu M; Meschanin, A; Millane, J; Miller, M L; Minaev, N G; Mioduszewski, S; Mischke, A; Mitchell, J; Mohanty, B; Morozov, D A; Munhoz, M G; Nandi, B K; Nattrass, C; Nayak, T K; Nelson, J M; Nepali, C; Netrakanti, P K; Nogach, L V; Nurushev, S B; Odyniec, Grazyna Janina; Ogawa, A; Okorokov, V; Oldenburg, M; Olson, D; Pachr, M; Pal, S K; Panebratsev, Yu A; Pavlinov, A I; Pawlak, T; Peitzmann, T; Perevozchikov, V; Perkins, C; Peryt, W; Phatak, S C; Planinic, M; Pluta, J; Poljak, N; Porile, N; Poskanzer, A M; Potekhin, M V; Potrebenikova, E V; Potukuchi, B V K S; Prindle, D; Pruneau, C; Putschke, J; Qattan, I A; Raniwala, R; Raniwala, S; Ray, R L; Relyea, D; Ridiger, A; Ritter, H G; Roberts, J B; Rogachevski, O V; Romero, J L; Rose, A; Roy, C; Ruan, L; Russcher, M J; Sahoo, R; Sakrejda, I; Sakuma, T; Salur, S; Sandweiss, J; Sarsour, M; Sazhin, P S; Schambach, J; Scharenberg, R P; Schmitz, N; Seger, J; Selyuzhenkov, I; Seyboth, P; Shabetai, A; Shahaliev, E; Shao, M; Sharma, M; Shen, W Q; Shimansky, S S; Sichtermann, E P; Simon, F; Singaraju, R N; Smirnov, N; Snellings, R; Sørensen, P; Sowinski, J; Speltz, J; Spinka, H M; Srivastava, B; Stadnik, A; Stanislaus, T D S; Staszak, D; Stock, R; Strikhanov, M N; Stringfellow, B C; Suaide, A A P; Suarez, M C; Subba, N L; Sumbera, M; Sun, X M; Sun, Z; Surrow, B; Symons, T J M; Szanto de Toledo, A; Takahashi, J; Tang, A H; Tarnowsky, T J; Thomas, J H; Timmins, A R; Timoshenko, S; Tokarev, M; Trainor, T A; Trentalange, S; Tribble, R E; Tsai, O D; Ulery, J; Ullrich, T; Underwood, D G; Van Buren, G; Van der Kolk, N; Van Leeuwen, M; Van der Molen, A M; Varma, R; Vasilevski, I M; Vasilev, A N; Vernet, R; Vigdor, S E; Viyogi, Y P; Vokal, S; Voloshin, S A; Wada, M; Waggoner, W T; Wang, F; Wang, G; Wang, J S; Wang, X L; Wang, Y; Webb, J C; Westfall, G D; Whitten, C; Wieman, H; Wissink, S W; Witt, R; Wu, J; Wu, Y; Xu, N; Xu, Q H; Xu, Z; Yepes, P; Yoo, I K; Yue, Q; Yurevich, V I; Zawisza, M; Zhan, W; Zhang, H; Zhang, W M; Zhang, Y; Zhang, Z P; Zhao, Y; Zhong, C; Zhou, J; Zoulkarneev, R; Zoulkarneeva, Y; Zubarev, A N; Zuo, J X

    2007-01-01

    The system created in non-central relativistic nucleus-nucleus collisions possesses large orbital angular momentum. Due to spin-orbit coupling, particles produced in such a system could become globally polarized along the direction of the system angular momentum. We present the results of Lambda and anti-Lambda hyperon global polarization measurements in Au+Au collisions at sqrt{s_NN}=62.4 GeV and 200 GeV performed with the STAR detector at RHIC. The observed global polarization of Lambda and anti-Lambda hyperons in the STAR acceptance is consistent with zero within the precision of the measurements. The obtained upper limit, |P_{Lambda,anti-Lambda}| <= 0.02, is compared to the theoretical values discussed recently in the literature.

  17. Global polarization measurement in Au+Au collisions

    Science.gov (United States)

    Abelev, B. I.; Aggarwal, M. M.; Ahammed, Z.; Anderson, B. D.; Arkhipkin, D.; Averichev, G. S.; Bai, Y.; Balewski, J.; Barannikova, O.; Barnby, L. S.; Baudot, J.; Baumgart, S.; Belaga, V. V.; Bellingeri-Laurikainen, A.; Bellwied, R.; Benedosso, F.; Betts, R. R.; Bhardwaj, S.; Bhasin, A.; Bhati, A. K.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Blyth, S.-L.; Bombara, M.; Bonner, B. E.; Botje, M.; Bouchet, J.; Brandin, A. V.; Burton, T. P.; Bystersky, M.; Cai, X. Z.; Caines, H.; Sánchez, M. Calderón De La Barca; Callner, J.; Catu, O.; Cebra, D.; Cervantes, M. C.; Chajecki, Z.; Chaloupka, P.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, J. Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chung, S. U.; Clarke, R. F.; Codrington, M. J. M.; Coffin, J. P.; Cormier, T. M.; Cosentino, M. R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Daugherity, M.; Moura, M. M. De; Dedovich, T. G.; Dephillips, M.; Derevschikov, A. A.; Didenko, L.; Dietel, T.; Djawotho, P.; Dogra, S. M.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, F.; Dunin, V. B.; Dunlop, J. C.; Mazumdar, M. R. Dutta; Edwards, W. R.; Efimov, L. G.; Emelianov, V.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Feng, A.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Fu, J.; Gagliardi, C. A.; Gaillard, L.; Ganti, M. S.; Garcia-Solis, E.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y. N.; Gos, H.; Grebenyuk, O.; Grosnick, D.; Grube, B.; Guertin, S. M.; Guimaraes, K. S. F. F.; Gupta, A.; Gupta, N.; Haag, B.; Hallman, T. J.; Hamed, A.; Harris, J. W.; He, W.; Heinz, M.; Henry, T. W.; Heppelmann, S.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffman, A. M.; Hoffmann, G. W.; Hofman, D. J.; Hollis, R. S.; Horner, M. J.; Huang, H. Z.; Hughes, E. W.; Humanic, T. J.; Igo, G.; Iordanova, A.; Jacobs, P.; Jacobs, W. W.; Jakl, P.; Jones, P. G.; Judd, E. G.; Kabana, S.; Kang, K.; Kapitan, J.; Kaplan, M.; Keane, D.; Kechechyan, A.; Kettler, D.; Khodyrev, V. Yu.; Kiryluk, J.; Kisiel, A.; Kislov, E. M.; Klein, S. R.; Knospe, A. G.; Kocoloski, A.; Koetke, D. D.; Kollegger, T.; Kopytine, M.; Kotchenda, L.; Kouchpil, V.; Kowalik, K. L.; Kravtsov, P.; Kravtsov, V. I.; Krueger, K.; Kuhn, C.; Kulikov, A. I.; Kumar, A.; Kurnadi, P.; Kuznetsov, A. A.; Lamont, M. A. C.; Landgraf, J. M.; Lange, S.; Lapointe, S.; Laue, F.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, C.-H.; Lehocka, S.; Levine, M. J.; Li, C.; Li, Q.; Li, Y.; Lin, G.; Lin, X.; Lindenbaum, S. J.; Lisa, M. A.; Liu, F.; Liu, H.; Liu, J.; Liu, L.; Ljubicic, T.; Llope, W. J.; Longacre, R. S.; Love, W. A.; Lu, Y.; Ludlam, T.; Lynn, D.; Ma, G. L.; Ma, J. G.; Ma, Y. G.; Mahapatra, D. P.; Majka, R.; Mangotra, L. K.; Manweiler, R.; Margetis, S.; Markert, C.; Martin, L.; Matis, H. S.; Matulenko, Yu. A.; McShane, T. S.; Meschanin, A.; Millane, J.; Miller, M. L.; Minaev, N. G.; Mioduszewski, S.; Mischke, A.; Mitchell, J.; Mohanty, B.; Morozov, D. A.; Munhoz, M. G.; Nandi, B. K.; Nattrass, C.; Nayak, T. K.; Nelson, J. M.; Nepali, C.; Netrakanti, P. K.; Nogach, L. V.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Okorokov, V.; Olson, D.; Pachr, M.; Pal, S. K.; Panebratsev, Y.; Pavlinov, A. I.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S. C.; Planinic, M.; Pluta, J.; Poljak, N.; Porile, N.; Poskanzer, A. M.; Potekhin, M.; Potrebenikova, E.; Potukuchi, B. V. K. S.; Prindle, D.; Pruneau, C.; Pruthi, N. K.; Putschke, J.; Qattan, I. A.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Relyea, D.; Ridiger, A.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Rose, A.; Roy, C.; Ruan, L.; Russcher, M. J.; Sahoo, R.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sarsour, M.; Sazhin, P. S.; Schambach, J.; Scharenberg, R. P.; Schmitz, N.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shabetai, A.; Shahaliev, E.; Shao, M.; Sharma, M.; Shen, W. Q.; Shimanskiy, S. S.; Sichtermann, E. P.; Simon, F.; Singaraju, R. N.; Smirnov, N.; Snellings, R.; Sorensen, P.; Sowinski, J.; Speltz, J.; Spinka, H. M.; Srivastava, B.; Stadnik, A.; Stanislaus, T. D. S.; Staszak, D.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Suaide, A. A. P.; Suarez, M. C.; Subba, N. L.; Sumbera, M.; Sun, X. M.; Sun, Z.; Surrow, B.; Symons, T. J. M.; Toledo, A. Szanto De; Takahashi, J.; Tang, A. H.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Timoshenko, S.; Tokarev, M.; Trainor, T. A.; Trentalange, S.; Tribble, R. E.; Tsai, O. D.; Ulery, J.; Ullrich, T.; Underwood, D. G.; Buren, G. Van; Kolk, N. Van Der; Leeuwen, M. Van; Molen, A. M. Vander; Varma, R.; Vasilevski, I. M.; Vasiliev, A. N.; Vernet, R.; Vigdor, S. E.; Viyogi, Y. P.; Vokal, S.; Voloshin, S. A.; Wada, M.; Waggoner, W. T.; Wang, F.; Wang, G.; Wang, J. S.; Wang, X. L.; Wang, Y.; Webb, J. C.; Westfall, G. D.; , C. Whitten, Jr.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, J.; Wu, Y.; Xu, N.; Xu, Q. H.; Xu, Z.; Yepes, P.; Yoo, I.-K.; Yue, Q.; Yurevich, V. I.; Zawisza, M.; Zhan, W.; Zhang, H.; Zhang, W. M.; Zhang, Y.; Zhang, Z. P.; Zhao, Y.; Zhong, C.; Zhou, J.; Zoulkarneev, R.; Zoulkarneeva, Y.; Zubarev, A. N.; Zuo, J. X.

    2007-08-01

    The system created in noncentral relativistic nucleus-nucleus collisions possesses large orbital angular momentum. Because of spin-orbit coupling, particles produced in such a system could become globally polarized along the direction of the system angular momentum. We present the results of Λ and Λ¯ hyperon global polarization measurements in Au+Au collisions at sNN=62.4 and 200 GeV performed with the STAR detector at the BNL Relativistic Heavy Ion Collider (RHIC). The observed global polarization of Λ and Λ¯ hyperons in the STAR acceptance is consistent with zero within the precision of the measurements. The obtained upper limit, |PΛ,Λ¯|⩽0.02, is compared with the theoretical values discussed recently in the literature.

  18. Constructing Gold-thiolate Oligomers and Polymers on Au(111) Based on the Linear S-Au-S Geometry

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Deen [ORNL; Dai, Sheng [ORNL

    2009-01-01

    Although neat gold-thiolate oligomers and polymers made of linear S-Au-S bonds have been well-known, observation of RS-Au-SR linear complexes (RS-being an alkylthiolate group) on Au(111) has been reported only recently. On the basis of the unique geometry and bonding of the RS-Au-SR complex on Au(111), we construct simple geometric models of Au-SR oligomers and polymers on Au(111) by fusing linear S-Au-S units matched to the underlying Au(111) surface lattice. We then optimize these models by density functional theory. The hexagonal geometry of the Au(111) lattice determines three possible angles (60{sup o}, 120{sup o}, and 180{sup o}) for connecting two linear S-Au-S units, which lead to isomerism of the Au-SR oligomers and polymer on Au(111). Here we explore open dimers, trimers, and tetramers and cyclic trimers, tetramers, and hexamers of the Au-SR oligomers on Au(111). We also examine four isomers of the Au-SR polymer on Au(111). We find that the 120{sup o} Au-S-Au angle is preferred in constructing both oligomeric and polymeric isomers. The two polymeric isomers with 120{sup o} Au-S-Au angles are found to be energetically competitive with a previous model proposed for the Au-SR polymer on Au(111). We also discuss potential ways to create Au-SR oligomers on Au(111).

  19. Constructing Gold-Thiolate Oligomers and Polymers on Au(111) Based on the Linear S-Au-S Geometry

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Sheng [ORNL; Jiang, Deen [ORNL

    2009-01-01

    Although neat gold-thiolate oligomers and polymers made of linear S-Au-S bonds have been well-known, observation of RS-Au-SR linear complexes (RS- being an alkylthiolate group) on Au(111) has been reported only recently. On the basis of the unique geometry and bonding of the RS-Au-SR complex on Au(111), we construct simple geometric models of Au-SR oligomers and polymers on Au(111) by fusing linear S-Au-S units matched to the underlying Au(111) surface lattice. We then optimize these models by density functional theory. The hexagonal geometry of the Au(111) lattice determines three possible angles (60{sup o}, 120{sup o}, and 180{sup o}) for connecting two linear S-Au-S units, which lead to isomerism of the Au-SR oligomers and polymer on Au(111). Here we explore open dimers, trimers, and tetramers and cyclic trimers, tetramers, and hexamers of the Au-SR oligomers on Au(111). We also examine four isomers of the Au-SR polymer on Au(111). We find that the 120{sup o} Au-S-Au angle is preferred in constructing both oligomeric and polymeric isomers. The two polymeric isomers with 120{sup o} Au-S-Au angles are found to be energetically competitive with a previous model proposed for the Au-SR polymer on Au(111). We also discuss potential ways to create Au-SR oligomers on Au(111).

  20. Development in Belgium of pinhole tomo-scintigraphy and of its applications to human and to small animals; Developpement en Belgique de la tomoscintigraphie stenopeique et de ses applications a l'homme et au petit animal

    Energy Technology Data Exchange (ETDEWEB)

    Seret, A. [Liege Univ., Institut de Physique, Imagerie Medicale Experimentale (Belgium)

    2006-06-15

    In Belgium, several researchers have been highly active in developing pinhole tomo-scintigraphy and have sometimes made a pioneer work. Their contributions concern as well the methodology of the technique as its applications to human and small animals. Reconstruction algorithms, of analytic and iterative type, have been developed and validated. They can reconstruct data obtained along circular, half-circular and non-circular acquisition orbits, the camera head being eventually tilted. A very performing method has been elaborated to determine the seven geometric parameters of the acquisition that are needed for an optimal reconstruction. The use of pinhole tomo-scintigraphy for thyroid exploration seems to be born in Belgium and a few validation studies were conducted in the country. Potentials of pinhole tomography application to parathyroid or bone scintigraphy have also been considered. Finally, some research groups are using pinhole tomo-scintigraphy for small animal studies. (author)

  1. Intrathecal therapy with 198Au-colloid for meningosis prophylaxis

    International Nuclear Information System (INIS)

    Telecobalt irradiation in combination with intrathecal (IT) methotrexate has been replaced by IT 198Au-colloid and methotrexate for meningosis prophylaxis in leukemia. Seventy-seven children received 56-200 MBq 198Au-colloid. The distribution was measured with a scintillation camera having a data processing facility. The radiopharmaceutical is adsorbed at the surface of the spaces with cerebrospinal fluid (CSF) 10-20 h after application. The normal retention of the administered radioactivity in the intracranial subarachnoid space (ISS) and in the spinal subarachnoid space (SSS) were 52+-10% and 26+-9%, respectively. An impairment of the normal distribution was observed after IT methotrexate because of postinjection CSF leakage. The calculated readiation absorbed doses in the cerebral and spinal meninges at a depth of 0.01 cm, i.e. the thickness of the pia, were 45+-17 mGy and 189+-91 mGy, respectively, for 1 MBq administered 198Au-colloid. The dosimetry shows that an effective radiation absorbed dose of 18 Gy can be delivered to the cerebral meninges by the application of 400 MBq 198Au-colloid. (orig.)

  2. d + Au hadron correlation measurements at PHENIX

    International Nuclear Information System (INIS)

    In these proceedings, we discuss recent results from d + Au collisions in PHENIX ridge related measurements and their possible hydrodynamic origin. We present the v2 at midrapidity and measurements of the pseudorapidity dependence of the ridge, distinguishing between the d-going and Au-going directions. We investigate the possible geometrical origin by comparing v2 in d + Au to that in p + Pb, Au + Au and Pb + Pb collisions. Future plans to clarify the role of geometry in small collision systems at RHIC are discussed

  3. Observation of dynamic water microadsorption on Au surface

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Xiaokang, E-mail: xiaokang.huang@tqs.com; Gupta, Gaurav; Gao, Weixiang; Tran, Van; Nguyen, Bang; McCormick, Eric; Cui, Yongjie; Yang, Yinbao; Hall, Craig; Isom, Harold [TriQuint Semiconductor, Inc., 500 W Renner Road, Richardson, Texas 75080 (United States)

    2014-05-15

    Experimental and theoretical research on water wettability, adsorption, and condensation on solid surfaces has been ongoing for many decades because of the availability of new materials, new detection and measurement techniques, novel applications, and different scales of dimensions. Au is a metal of special interest because it is chemically inert, has a high surface energy, is highly conductive, and has a relatively high melting point. It has wide applications in semiconductor integrated circuitry, microelectromechanical systems, microfluidics, biochips, jewelry, coinage, and even dental restoration. Therefore, its surface condition, wettability, wear resistance, lubrication, and friction attract a lot of attention from both scientists and engineers. In this paper, the authors experimentally investigated Au{sub 2}O{sub 3} growth, wettability, roughness, and adsorption utilizing atomic force microscopy, scanning electron microscopy, reflectance spectrometry, and contact angle measurement. Samples were made using a GaAs substrate. Utilizing a super-hydrophilic Au surface and the proper surface conditions of the surrounding GaAs, dynamic microadsorption of water on the Au surface was observed in a clean room environment. The Au surface area can be as small as 12 μm{sup 2}. The adsorbed water was collected by the GaAs groove structure and then redistributed around the structure. A model was developed to qualitatively describe the dynamic microadsorption process. The effective adsorption rate was estimated by modeling and experimental data. Devices for moisture collection and a liquid channel can be made by properly arranging the wettabilities or contact angles of different materials. These novel devices will be very useful in microfluid applications or biochips.

  4. Work function tuning at Au-HfO2 interfaces using organophosphonate monolayers

    Science.gov (United States)

    Kwan, Matthew; Cardinal, Thomas; Mutin, P. Hubert; Ramanath, Ganpati

    2016-05-01

    We show that introducing organophosphonate nanomolecular monolayers (NMLs) at Au-HfO2 interfaces shift the effective work function by 0.2 eV ≥ ΔΦeff ≥ -0.6 eV, due to NML body and bonding dipoles. Electron spectroscopy of NML-Au, NML-HfO2, and Au-NML-HfO2 structures indicate that the Au-NML bond strength is the major factor. Au-NML covalent bonding yields ΔΦeff ˜ - 0.2 eV, while weak bonding yields ΔΦeff ˜ 0.6 eV. In contrast, NMLs on HfO2 decrease Φeff by ˜0.4 eV due to competing contributions from NML-HfO2 bonding strength and NML orientation. These findings are relevant for nanomolecularly tailoring the electronic properties of metal-ceramic interfaces for applications.

  5. Decay spectroscopy of $^{178}$Au

    CERN Document Server

    Whitmore, B

    In this thesis, the neutron-deficient nucleus $^{178}$Au is investigated through decay spectroscopy. Si and HPGe detectors were used to analyse the decay radiation of $^{178}$Au and its daughter nuclei. Previous studies have been unable to distinguish decay radiation from different isomeric states of this nucleus. This thesis represents the first time such isomeric discrimination has been achieved, and presents tentative spin assignments of both the ground state and an isomer. The neutron-deficient gold isotopes are an area of interest for the study of shape coexistence. This is the phenomenon exhibited by nuclei able to exist at a number of close lying energy minima, each reflecting a distinct type of deformation. It is hoped that studies such as this can help identify the evolution of nuclear deformation in this region of the nuclear chart.

  6. Introduction au filtre de Kalman

    OpenAIRE

    Alazard, Daniel

    2006-01-01

    Ce document est une introduction au filtre optimal de Kalman appliquée aux systèmes linéaires. On suppose connues la théorie des asservissements linéaires et du filtrage fréquentiel (continu et discret) ainsi que les notions d'états pour représenter les systèmes dynamiques linéaires.

  7. Electrochemiluminescence immunosensing strategy based on the use of Au-Ag nanorods as a peroxidase mimic and NH4CoPO4 as a supercapacitive supporter: Application to the determination of carcinoembryonic antigen

    International Nuclear Information System (INIS)

    The luminol-H2O2 system is widely applied in electrochemiluminescence (ECL) assays but has limited stability. We are presenting an alternative immunosensing strategy by making use of Au-Ag nanorods that mimic the enzyme peroxidase. It also makes use of the supercapacitive supporter NH4CoPO4 as a supporter substrate that facilitates ion movement due to its many nanogaps between the assembled nanoplates. It also plays a vital role for stabilizing the ECL signal of luminol. The immunosensor was constructed by first placing a chitosan film containing NH4CoPO4, Au-Ag and luminol on a glassy carbon electrode (GCE), and the immobilizing anti-CEA on its surface. ECL is generated via electrochemical reaction of luminol on the surface of the Au-Ag-luminol film in the presence of H2O2. The assay was evaluated with respect to effects of pH value, time and temperature of incubation, specificity, reproducibility, and stability in a lab setting. A linear relationship between ECL intensity and CEA concentration is found for the 0.1 pg · mL−1 to 380 ng · mL−1 range, and the lower detection limit is as low as 30 fg · mL−1. In our perception, this immunoassay has a large scope in that numerous other immunoassays will become feasible by using other antibodies and, possibly, aptamers. (author)

  8. First Modelling Results of the EM Response of a CO2 Storage in the Paris Basin Premières modélisations de la réponse EM d’un stockage de CO2 dans le bassin Parisien

    Directory of Open Access Journals (Sweden)

    Bourgeois B.

    2010-07-01

    une plaque horizontale carree de 2 km de cote et de 70 m d’epaisseur flottant au toit de l’aquifere reservoir. Une saturation uniforme en CO2 egale a 80 % a ete adoptee dans la plaque, ce qui represente un contraste de resistivite de 25 par rapport a l’aquifere initial. Deux variantes du modele avec des resistivites differentes pour l’aquifere sont comparees. Le cas d’une resistivite realiste de 20 ohm.m donne une reponse electrique time-lapse inferieure au bruit de repetition estime. Ce resultat decevant s’explique par le fait que la couche reservoir dans ce cas est loin d’etre la plus conductrice du modele ; par consequent, elle est traversee seulement par une petite partie du courant injecte, d’ou la faible reponse du CO2. Une deuxieme variante avec une resistivite plus favorable que la realite, mais parfaitement realiste pour un aquifere salin (1 ohm.m, donne une reponse electrique timelapse de l’ordre de 6 % du champ initial, ce qui est bien superieur au bruit de repetition estime. Nous concluons donc que la methode LEMAM est prometteuse pour surveiller un stockage de CO2, a condition que l’aquifere reservoir soit suffisamment conducteur par rapport au reste de la serie recoupee par les longues electrodes.

  9. L’apprentissage au CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    En 1961, sur la base du constat que l’évolution du marché du travail nécessitait un besoin croissant de personnel qualifié, le 1er accord entre la République et canton de Genève et le CERN fut signé. Cet accord avait notamment pour objet la formation professionnelle de jeunes électroniciens et techniciens de laboratoires en physique. Le CERN, acteur local économique d’importance, soulignait par cet accord sa volonté de participer au développement économique et social local. Le 1er apprenti arriva au CERN en 1965. En 1971, le centre d’apprentissage fut créé ; il accueille aujourd’hui plus d’une vingtaine d’apprentis au total, à raison d’environ six nouveaux apprentis chaque année. Cet apprentissage est dédié aux jeunes âgés e...

  10. Évaluation comparée du colmatage bactériologique d'un géocomposite de drainage en fond d'installation de stockage de déchets Experimental evaluation of the biological clogging of drainage geocomposite at the botom of landfill

    Directory of Open Access Journals (Sweden)

    BLOND, Eric ; FOURMONT, Stéphane ; BLOQUET, Carole

    2012-08-01

    Full Text Available Dans le secteur des géosynthétiques, la qualité, les performances, la durabilité et la conformité sont essentielles, notamment pour une utilisation sécurisée sur des sites comme les installations de stockage des déchets. Cet article nous présente une étude du potentiel de colmatage biologique de géocomposites de drainage utilisés pour remplacer partiellement la couche granulaire drainante en fond de casier d'une installation de stockage de déchets non dangereux. This paper presents a study of the biological clogging potential of drainage geocomposites installed in the bottom of landfills, as a replacement to 0.20 cm of granular material. Ìn a first section of the document, the drainage capacity actually needed is analyzed with respect to the biological clogging potential. The general principles governing experimental evaluation of biological clogging are presented in a second step. The apparatus used to conduct the evaluation is then presented, along with the results obtained after several months of monitoring. The results presented involved circulation of a fresh leachate, pumped in a class 2, non-hazardous landfill into 9 cells, and monitoring of the flow through the system, either geocomposites or granular drainage layer.

  11. High stability of the goldalloy fullerenes: A density functional theory investigation of M12@Au20 (M = Na, Al, Ag, Sc, Y, La, Lu, and Au) clusters

    International Nuclear Information System (INIS)

    Discovering highly stable metal fullerenes such as the celebrated C60 is interesting in cluster science as they have potential applications as building blocks in new nanostructures. We here investigated the structural and electronic properties of the fullerenes M12@Au20 (M = Na, Al, Ag, Sc, Y, La, Lu, and Au), using a first-principles investigation with the density functional theory. It is found that these compound clusters possess a similar cage structure to the icosahedral Au32 fullerene. La12@Au20 is found to be particularly stable among these clusters. The binding energy of La12@Au20 is 3.43 eV per atom, 1.05 eV larger than that in Au32. The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap of La12@Au20 is only 0.31 eV, suggesting that it should be relatively chemically reactive. (condensed matter: structural, mechanical, and thermal properties)

  12. Structural and morphological peculiarities of hybrid Au/nanodiamond engineered nanostructures

    Science.gov (United States)

    Matassa, Roberto; Orlanducci, Silvia; Reina, Giacomo; Cassani, Maria Cristina; Passeri, Daniele; Terranova, Maria Letizia; Rossi, Marco

    2016-01-01

    Nanostructured Au nano-platelets have been synthesized from an Au(III) complex by growth process triggered by nanodiamond (ND). An electroless synthetic route has been used to obtain 2D Au/ND architectures, where individual nanodiamond particles are intimately embedded into face-centered cubic Au platelets. The combined use of high resolution transmission electron microscopy (HR-TEM) and selected area electron diffraction (SAED), was able to reveal the unusual organization of these hybrid nanoparticles, ascertaining the existence of preferential crystallographic orientations for both nanocrystalline species and highlighting their mutual locations. Detailed information on the sample microstructure have been gathered by fast Fourier transform (FFT) and inverse fast Fourier transform (IFFT) of HR-TEM images, allowing us to figure out the role of Au defects, able to anchor ND crystallites and to provide specific sites for heteroepitaxial Au growth. Aggregates constituted by coupled ND and Au, represent interesting systems conjugating the best optoelectronics and plasmonics properties of the two different materials. In order to promote realistically the applications of such outstanding Au/ND materials, the cooperative mechanisms at the basis of material synthesis and their influence on the details of the hybrid nanostructures have to be deeply understood. PMID:27514638

  13. Au nanorings for enhancing absorption and backscattering monitored with optical coherence tomography

    Energy Technology Data Exchange (ETDEWEB)

    Tseng, Hung-Yu; Lee, Cheng-Kuang; Wu, Shou-Yen; Chi, Ting-Ta; Yang, Kai-Min; Wang, Jyh-Yang; Kiang, Yean-Woei; Yang, C C [Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan, Republic of China (China); Tsai, Meng-Tsan [Department of Electrical Engineering, Chang Gung University, No 259 Wen-Hwa 1st Road, Kwei-Shan, Tao-Yuan, 33302 Taiwan (China); Wu, Yang-Che [Graduate Institute of Clinical Dentistry, School of Dentistry, National Taiwan University, No 1 Changde St, Taipei, 10002 Taiwan (China); Chou, Han-Yi E; Chiang, Chun-Pin, E-mail: ywkiang@ntu.edu.tw, E-mail: ccy@cc.ee.ntu.edu.tw [Graduate Institute of Oral Biology, School of Dentistry, National Taiwan University, No 1 Changde St, Taipei, 10002 Taiwan (China)

    2010-07-23

    Preparation of a high-concentration Au nanoring (NR) water solution and its applications to the enhancement of image contrast in optical coherence tomography (OCT) and the generation of the photothermal effect in a bio-sample through localized surface plasmon (LSP) resonance are demonstrated. Au NRs are first fabricated on a sapphire substrate with colloidal lithography and secondary sputtering of Au, and then transferred into a water solution through a liftoff process. By controlling the NR geometry, the LSP dipole resonance wavelength in tissue can cover a spectral range of 1300 nm for OCT scanning of deep tissue penetration. The extinction cross sections of the fabricated Au NRs in water are estimated to give levels of 10{sup -10}-10{sup -9} cm{sup 2} near their LSP resonance wavelengths. The fabricated Au NRs are then delivered into pig adipose samples for OCT scanning. It is observed that, when resonant Au NRs are delivered into such a sample, LSP resonance-induced Au NR absorption results in a photothermal effect, making the opaque pig adipose cells transparent. Also, the delivered Au NRs in the intercellular substance enhance the image contrast of OCT scanning through LSP resonance-enhanced scattering. By continuously OCT scanning a sample, both photothermal and image contrast enhancement effects are observed. However, by continually scanning a sample with a low scan frequency, only the image contrast enhancement effect is observed.

  14. Templated biomineralization of Au nanoplates under bovine serum albumin Langmuir monolayers

    International Nuclear Information System (INIS)

    Au nanoplates were generated by spontaneous reduction of chloroaurate ions (AuCl4-) under bovine serum albumin (BSA) Langmuir monolayers at room temperature. The structure of the resulting Au particulates was analyzed by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), selected-area electron diffraction (SAED), and high resolution transmission electron microscopy (HRTEM). The results showed that BSA provided dual functions for both reducing Au3+ ions and directing anisotropic growth of Au particles into plate-like structure as well. Amorphous Au particulates were obtained firstly in a relatively short reaction time, and then anisotropic Au nanoparticles were generated at extended reaction durations. The triangular Au nanoplates oriented along (1 1 1) basal planes were obtained via the reduction of chloroaurate ions by BSA with a relatively longer reaction duration. The present research provides a biological route to produce single-crystalline gold nanoplates with a wide variety of applications, and it also verifies that the interaction between protein/peptide and gold ions/surface may be used advantageously for green chemical synthesis of nanogold. Hopefully, this would contribute to promote genuine green biomimetic synthesis of nanomaterials with prescribed geometrical features where rationally designed multifunctional peptides are preferred.

  15. Reduction of uranium and plutonium oxides by aluminum. Application to the recycling of plutonium; Reduction des oxydes d'uranium et de plutonium par l'aluminium application au recyclage du plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Gallay, J. [Commissariat a l' Energie Atomique, Valduc (France). Centre d' Etudes

    1968-07-01

    A process for treating plutonium oxide calcined at high temperatures (1000 to 2000 deg. C) with a view to recovering the metal consists in the reduction of this oxide dissolved in a mixture of aluminium, sodium and calcium fluorides by aluminium at about 1180 deg. C. The first part of the report presents the results of reduction tests carried out on the uranium oxides UO{sub 2} and U{sub 3}O{sub 8}; these are in agreement with the thermodynamic calculations of the exchange reaction at equilibrium. The second part describes the application of this method to plutonium oxides. The Pu-Al alloy obtained (60 per cent Pu) is then recycled in an aqueous medium. (author) [French] Un procede de traitement de l'oxyde de plutonium calcine a haute temperature (1000 deg. C a 2000 deg. C), en vue de la recuperation du metal, consiste a reduire cet oxyde dissous dans un melange de fluorures d'aluminium, de sodium et de calcium, par l'aluminium vers 1180 deg. C. Une premiere partie du rapport presente les resultats des essais de reduction des oxydes d'uranium UO{sub 2} et U{sub 3}O{sub 8}, en accord avec les resultats du calcul thermodynamique de la reaction d'echange a l'equilibre. Une seconde partie rend compte de l'application de cette methode a l'oxyde de plutonium. L'alliage Pu-Al obtenu (60 pour cent Pu) est ensuite recycle par voie aqueuse. (auteur)

  16. Initial state geometry and fluctuations in Au+Au, Cu+Au and U+U collisions at RHIC

    OpenAIRE

    Schenke, Bjoern; Tribedy, Prithwish; Venugopalan, Raju

    2014-01-01

    We study within the IP-Glasma and two-component MC-Glauber models the effects of initial state geometry and fluctuations on multiplicities and eccentricities for several collision species at the Relativistic Heavy Ion Collider (RHIC). These include copper-gold (Cu+Au), gold-gold (Au+Au), and uranium-uranium (U+U) collisions. The multiplicity densities per participant pair are very similar in all systems studied. Ellipticities vary strongly between collision systems, most significantly for cen...

  17. Site-selective deposition of ultra-fine Au nanoparticles on polyaniline nanofibers for H2O2 sensing

    International Nuclear Information System (INIS)

    Ultra-fine and uniform gold nanoparticles (AuNPs, 2 nm) were selectively reduced on polyaniline nanofibers (PANFs) without using protective agents. The water-dispersible PANFs, which acted as the reductant, provided a high surface area to absorb and react with chloroaurate anions (AuCl4-). In-situ UV-vis spectra indicated that the imine sites on PANFs formed complexes with AuCl4-. The AuNPs were then selectively produced on these sites, resulting in a uniform distribution of AuNPs on PANFs as evidenced by transmission electron microscopy. A possible mechanism for the formation of the AuNPs-PANFs nanocomposite is proposed. The Fourier transform infrared spectroscopy and X-ray diffraction results indicate a strong interaction between AuNPs and PANFs. This strong interaction would accelerate the redox reactions for both PANFs and AuNPs, and enhanced the anodic oxidation of H2O2. The nanocomposite electrode of AuNPs-PANFs (3 μg with 45 wt% AuNPs) on a glassy carbon electrode (GCE) exhibited a fast response time (less than 3 s) and a high sensitivity (8.34 mA M-1) for H2O2 sensing. Our findings suggested that the obtained nanocomposite electrode may find interesting applications in biosensors.

  18. Facile Growth of Multi-twined Au Nanostructures

    Indian Academy of Sciences (India)

    Raj Kumar Bera; Asim Bhaumik; C Retna Raj

    2015-12-01

    We describe a facile growth of chain-like Au nanostructures and their spontaneous transformation to multi-twined nanostructure using a mild reducing agent bisphenol A (BPA). The growth Au nanostructures involves the chemical reduction of HAuCl4 by BPA in the presence of cetyltrimethylammonium bromide (CTAB) as capping agent in alkaline condition without any seeds. Wire and chain-like Au nano-network structures with diameter in the range of 4 to 9 nm are obtained in the initial stage of the reaction. These chainlike nanostructures undergo spontaneous transformation into multi-twined nanostructures within 24 h. These nanocrystalline multi-twined structures have an average size of 80-90 nm. X-ray and selected area electron diffraction measurements reveal that the Au nanoparticles have (111), (200), (220) and (311) planes of a face centered cubic structure. High resolution transmission electron microscopic measurement shows that the nanostructures are mainly composed of (111) lattice plane with twin boundaries. The concentration of HAuCl4, BPA and CTAB has pronounced effect in the growth of nanostructures. The multi-twined nanostructures are highly stable at room temperature over a period of one month and can be used for catalytic applications.

  19. Rational design and synthesis of excavated trioctahedral Au nanocrystals.

    Science.gov (United States)

    Chen, Qiaoli; Jia, Yanyan; Shen, Wei; Xie, Shuifen; Yang, Yanan; Cao, Zhenming; Xie, Zhaoxiong; Zheng, Lansun

    2015-06-28

    Excavated polyhedral nanostructures, possessing the features of high surface area and well-defined surface structure with a specific crystal facet and avoidance of aggregation, could be one of the best choices for the purpose of reducing consumption and improving performance of noble metals in many application fields. However, the formation of the excavated structures is thermodynamically unfavourable and its rational synthesis is far beyond our knowledge. In this work, taking overgrowth of Pd onto trioctahedral Au nanocrystals as a model, we present a deep insight study for synthesizing an excavated structure relying on the protection role of surfactants under suitable crystal growth kinetics. Based on the abovementioned understanding, we designed a simple and effective strategy to synthesize Au nanocrystals with excavated trioctahedral structure in one step. Due to the novel feature of the excavated structure and exposed high energy {110} facets, excavated trioctahedral Au NCs exhibited optical extinction at the near-infrared region and showed high catalytic activity towards the reduction of p-nitrophenol. Moreover, the synthetic strategy can be extended to the synthesis of excavated Au-Pd alloys. PMID:26030607

  20. Global dynamics of shaft lines of turbo-machineries coupled to surrounding fluids: application to the case of fluid sheets; Dynamique globale des lignes d'arbres de turbomachines couplees aux fluides environnants: application au cas des lames fluides

    Energy Technology Data Exchange (ETDEWEB)

    Lornage, D.

    2001-12-15

    Shaft lines of turbo-machineries have to stand increasing reliability, efficiency and safety requirements. A precise modeling of the rotating parts with all possible coupling has become necessary. In this context, this work aims to develop a global modeling of rotating wheel/shaft system inside a surrounding fluid in order to foresee its dynamical behaviour. The use and advantage of Eulerian, Lagrangian and mixed (arbitrary Lagrangian Eulerian - ALE) formulations is recalled first. A bibliographic synthesis of the classical techniques used in structure mechanics and of coupling techniques for rotating machines is presented. The coupling technique retained is presented. It uses fluid and structure models independently developed and validated. The structure domain is discretized by the finite-element method. The fluid domain is discretized by the finite-difference method taking into consideration the hypotheses linked with thin films. A modal base projection combined with a mesh at the fluid-structure interface allows an efficient, adaptable and evolutive coupling. Finally, the method is applied to 3 test-cases. The first two ones comprise a shaft/disc system coupled to a fluid sheet between the disc and the casing and to an hydrodynamic bearing. Both cases allow a first validation of the coupling method. The third case aims to study a structure closer to a real system made of a shaft and a wheel coupled to a fluid sheet between a flange and a casing. These three applications allow to show the trends linked with the fluid effects and the coupling between the flexible sub-parts of the structure. (J.S.)

  1. One-pot synthesis of AuPt alloyed nanoparticles by intense x-ray irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Cheng-Liang; Hsao, Bo-Jun; Lai, Sheng-Feng; Chen, Hsiang-Hsin; Chen, Yi-Yun; Chien, Chia-Chi; Cai, Xiaoqing; Kempson, Ivan M; Hwu, Y [Institute of Physics, Academia Sinica, Nankang, Taipei 11529, Taiwan (China); Chen, Wen-Chang [Department of Chemical and Materials Engineering, National Yulin University of Science and Technology, Douliou, Yunlin 64002, Taiwan (China); Margaritondo, G, E-mail: clwang@phys.sinica.edu.tw, E-mail: phhwu@.sinica.edu.tw [Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne (Switzerland)

    2011-02-11

    We synthesized AuPt alloyed nanoparticles in colloidal solution by a one-pot procedure based on synchrotron x-ray irradiation in the presence of PEG (polyethylene glycol). The exclusive presence of alloyed nanoparticles with fcc structure was confirmed by several different experiments including UV-vis spectroscopy, x-ray diffraction (XRD) and transmission electron microscopy (TEM). The composition of the AuPt alloyed nanoparticles can be varied in a continuous fashion by simply varying the feed ratios of Au and Pt precursors. The nanoparticles exhibited colloidal stability and biocompatibility, important for potential applications.

  2. Air-stable Fe@Au nanoparticles synthesized by the microemulsion's methods

    Science.gov (United States)

    Rivas, José; Redondo, Yolanda Piñeiro; Iglesias-Silva, Esther; Vilas-Vilela, J. M.; León, L. M.; López-Quintela, Manuel Arturo

    2013-05-01

    Magnetic particles covered by gold are very important in many biological applications. However, there are not simple methods to produce small (microemulsions, can avoid such problems and is able to produce very stable core-shell Fe@Au nanoparticles. With this procedure, nanoparticles of ˜6 nm with a Fe core of 3 nm can easily be obtained. These Fe@Au nanoparticles, with a saturation magnetization of 1.13 emu/g, are very stable even in air after magnetic separation from the solution, which shows the good covering of the Fe core by the Au shell. In this contribution we will report the key parameters, which have to be taken into account, to prepare such stable Fe@Au dispersions and analyze their optical and magnetic properties, as well as their possible applications as biosensors, targeted magnetic separation, etc.

  3. Mesure et modélisation des contraintes naturelles dans un massif rocheux alpin. Effets de la topographie, de l'anisotropie et des contraintes tectoniques; application au projet de tunnel Maurienne-Ambin.

    OpenAIRE

    Mayeur, Bertrand

    1999-01-01

    Le projet de tunnel de base Maurienne-Arnbin, qui traversera les Alpes sur plus de 50 km de longueur et sous un 'recouvrement de terrain atteignant au maximum 2500 m, pose le problème de la prévision des états de contraintes naturelles dans les massifs rocheux ; le comportement du rocher pendant l'excavation aussi bien que la stabilité de l'ouvrage en dépendent. Pour étudier cette question complexe, nous avons eu recours à plusieurs approches complémentaires. Il s'agit tout d'abord d'une étud...

  4. Thiol-PEG-carboxyl-stabilized Fe{sub 2}O{sub 3}/Au nanoparticles targeted to CD105: Synthesis, characterization and application in MR imaging of tumor angiogenesis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Song; Gong, Mingfu; Zhang, Dong; Yang, Hua [Department of Radiology, Xinqiao Hospital, Third Military Medical University, Chongqing 400037 (China); Gao, Fabao [Department of Radiology, West China Hospital, Sichuan University, Chengdu 610041 (China); Zou, Liguang, E-mail: zlgxqyy@163.com [Department of Radiology, Xinqiao Hospital, Third Military Medical University, Chongqing 400037 (China)

    2014-07-15

    Objective: To detect tumor angiogenesis in tumor-bearing mice using thiol-PEG-carboxyl-stabilized Fe{sub 2}O{sub 3}/Au nanoparticles targeted to CD105 on magnetic resonance imaging (MRI). Methods: Fe{sub 2}O{sub 3}/Au nanoparticles (hybrids) were prepared by reducing Au{sup 3+} on the surface of Fe{sub 2}O{sub 3} nanoparticles. Hybrids were stabilized with thiol-PEG-carboxyl via the Au–S covalent bond, and further conjugated with anti-CD105 antibodies through amide linkages. Characteristics of the hybrid-PEG-CD105 nanoparticles were evaluated. Using these nanoparticles, the labeling specificity of human umbilical vein endothelial cells (HUVECs) was evaluated in vitro. MRI T2*-weighted images were obtained at different time points after intravenous administration of the hybrid-PEG-CD105 nanoparticles in the tumor-bearing mice. After MR imaging, the breast cancer xenografts were immediately resected for immunohistochemistry staining and Prussian blue staining to measure the tumor microvessel density (MVD) and evaluate the labeling of blood microvessels by the hybrid-PEG-CD105 nanoparticles in vivo. Results: The mean diameter of the hybrid-PEG-CD105 nanoparticles was 56.6 ± 8.0 nm, as measured by transmission electron microscopy (TEM). Immune activity of the hybrid-PEG-CD105 nanoparticles was 53% of that of the anti-CD105 antibody, as detected by enzyme-linked immunosorbent assay (ELISA). The specific binding of HUVECs with the hybrid-PEG-CD105 nanoparticles was proved by immunostaining and Prussian blue staining in vitro. For breast cancer xenografts, the combination of the hybrid-PEG-CD105 nanoparticles with blood microvessels was detectable by MRI after 60 min administration of the contrast agent. The T2* relative signal intensity (SI{sub R}) was positively correlated with the tumor MVD (R{sup 2} = 0.8972). Conclusion: Anti-CD105 antibody-coupled, thiol-PEG-carboxyl-stabilized core–shell Fe{sub 2}O{sub 3}/Au nanoparticles can efficiently target CD105 expressed

  5. Contribution à l'analyse des capacités musculaires des membres supérieurs et inférieurs lors de l'actionnement de commandes automobiles. Application au frein à main

    OpenAIRE

    NUMA,J

    2009-01-01

    Mon stage de Master s'est déroulé au Laboratoire de Biomécanique des Chocs (LBMC) de l'Institut National de la Recherche sur les Transports et leur Sécurité (INRETS). Les principaux axes de recherche du LBMC concernent l'amélioration des connaissances biomécaniques sur la structure et le comportement du corps humain en interaction avec son environnement, afin de développer et d'exploiter des outils notamment pour l'évaluation et l'amélioration de la protection des usagers des transpor...

  6. Un multi-outil adapté au parcours cognitif de l’étudiant en traduction spécialisée : application à la biomédecine

    Directory of Open Access Journals (Sweden)

    Sylvie Vandaele

    2007-01-01

    Full Text Available [Français] Le site BiomeTTico vise à répondre aux difficultés soulevées par l’apprentissage de la traduction spécialisée (biomédecine. Il s’agit d’un multi-outil informatique d’aide à l’enseignement de la traduction biomédicale au baccalauréat et aux cycles supérieurs, conçu en fonction d’une approche cognitive de l’apprentissage et de la pratique de la traduction. Prenant en compte différentes catégories d’utilisateurs, il se veut également une plate-forme de valorisation des travaux de recherche, notamment au 2e et au 3e cycle, et, dans une certaine mesure, un site de référence pour les traducteurs professionnels. L’organisation du site est fondée sur des principes d’utilisabilité, d’interactivité et de participation collaborative au contenu, adaptés à un contexte pédagogique. Il intègre différents produits de la recherche menée ces dernières années et il est appelé à évoluer dans le temps. Bien que son contenu soit spécifique à la biomédecine, sa structure est réutilisable dans d’autres contextes d’enseignement de la traduction. [English] BiomeTTico is a Web site intended to respond to various problems related to the acquisition of translation competence and knowledge in LSP (languages for specific purposes ; here, biomedicine, as well as to enhance the value of research projects of post-graduate students. Designed from a cognitive perspective, this is a multi-tool helping the teaching of biomedical translation at different levels, from beginners to advanced students at the doctorate level. It takes into account a number of principles such as usability, interactivity and collaborative participation, as well as different types of users. Furthermore, it integrates a number of products resulting from the research activities over the past few years and is meant to evolve with time. Although the content of the site is specific to biomedicine, the structure may be used in other

  7. L’olivier au Maroc

    OpenAIRE

    El Mouhtadi Issam; Agouzzal Mohamed; Guy François

    2014-01-01

    L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive) mais pour conq...

  8. Predicted Habitat Suitability for Porites Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Porites in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  9. Predicted Habitat Suitability for Leptoseris Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  10. Predicted Habitat Suitability for All Mesophotic Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is located between the islands of Maui, Lanai, Molokai and Kahoolawe, and includes the Au'au Channel as well as parts of the Kealaikahiki, Alalakeiki...

  11. Predicted Habitat Suitability for Porites in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Porites in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  12. Predicted Habitat Suitability for All Mesophotic Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for all mesophotic corals in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to...

  13. Predicted Habitat Suitability for Montipora Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Montipora in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  14. Predicted Habitat Suitability for Leptoseris in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  15. A Study of Parton Energy Loss in Au+Au Collisions at RHIC using Transport Theory

    OpenAIRE

    Nara, Y.; Vance, S. E.; Csizmadia, P.

    2001-01-01

    Parton energy loss in Au+Au collisions at RHIC energies is studied by numerically solving the relativistic Boltzmann equation for the partons including $2 \\leftrightarrow 2$ and $2 \\to 2 + final state radiation$ collision processes. Final particle spectra are obtained using two hadronization models; the Lund string fragmentation and independent fragmentation models. Recent, preliminary $\\pi^0$ transverse momentum distributions from central Au+Au collisions at RHIC are reproduced using gluon-g...

  16. Chitosan-induced Au/Ag nanoalloy dispersed in IL and application in fabricating an ultrasensitive glucose biosensor based on luminol-H₂O₂-Cu²⁺/IL chemiluminescence system.

    Science.gov (United States)

    Chaichi, M J; Alijanpour, S O

    2014-11-01

    A novel glucose biosensor based on the chemiluminescence (CL) detection of enzymatically generated hydrogen peroxide (H₂O₂) was constructed by one covalent immobilization of glucose oxidase (GOD) in glutaraldehyde-functionalized glass cell. In following, chitosan-induced Au/Ag nanoparticles dispersed in ion liquid (IL) were synthesised and immobilized on it. Herein, chitosan molecules acted as both the reducing and stabilizing agent for the preparation of NPs and also, as a coupling agent GOD and Au/Ag alloy NPs. In addition to catalyze luminol CL reaction, these NPs offered excellent catalytic activity toward hydrogen peroxide generation in enzymatic reaction between GOD and glucose. The used IL in fabrication of biosensor increased its stability. Also, IL alongside Cu(2+) accelerated enzymatic and CL reaction kinetic, and decreased luminol CL reaction optimum pH to 7.5 which would enable sensitive and precision determination of glucose. Under optimum condition, linear response range of glucose was found to be 1.0 × 10(-6)-7.5 × 10(-3)M, and detection limit was 4.0 × 10(-7)M. The CL biosensor exhibited good storage stability, i.e., 90% of its initial response was retained after 2 months storage at pH 7.0. The present CL biosensor has been applied satisfactory to analysis of glucose in real serum and urine samples. PMID:25086323

  17. 金硅共晶键合在微机械Golay-cell红外探测器中的应用%Au/Si Eutectic Bonding Application for Micromachining Golay-cell Infrared Detector

    Institute of Scientific and Technical Information of China (English)

    赵林林; 徐晨; 杨道虹; 霍文晓; 赵慧; 沈光地

    2005-01-01

    利用硅微机械加工技术制备微机械Golay-cell红外探测器硅可动敏感薄膜,探测器气室由带薄膜结构硅片与带孔结构硅片键合密闭形成,气室中敏感气体吸收红外辐射而膨胀,使硅膜产生形变,借助硅膜电极板与金属电极板形成的平行板电容反映该形变变化量.运用Si/Ti/Au/Au/Ti/Si实现对探测器的金/硅共晶键合封装,形成气室,制备出探测器样品并初步得到响应.该键合方法能够进行选择区域键合,实验证明键合强度达到体硅强度.

  18. Phospholipid Encapsulated AuNR@Ag/Au Nanosphere SERS Tags with Environmental Stimulus Responsive Signal Property.

    Science.gov (United States)

    Su, Xueming; Wang, Yunqing; Wang, Wenhai; Sun, Kaoxiang; Chen, Lingxin

    2016-04-27

    Surface-enhanced Raman scattering (SERS) tags draw much attention due to the ultrasensitivity and multiplex labeling capability. Recently, a new kind of SERS tags was rationally designed by encapsulating metal nanoparticles with phospholipid bilayers, showing great potential in theranostics. The lipid bilayer coating confers biocompatibility and versatility to changing surface chemistry of the tag; however, its "soft" feature may influence SERS signal stability, which is rarely investigated. Herein, we prepared phospholipid-coated AuNR@Ag/Au nanosphere SERS tags by using three different kinds of Raman reporters, i.e., thio-containing 4-nitrothiophenol (NT), nitrogen-containing hydrophobic chromophore cyanine 7 monoacid (Cy7), and alkyl chain-chromophore conjugate 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine (DiD). It was found that signal responses were different upon additional stimulation which the tags may encounter in theranostic applications including the presence of detergent Triton X-100, lipid membrane, and photothermal treatment. Living-cell imaging also showed signal changing distinction. The different SERS signal performances were attributed to the different Raman reporter releasing behaviors from the tags. This work revealed that Raman reporter structure determined signal stability of lipid-coated SERS tags, providing guidance for the design of stimulus responsive tags. Moreover, it also implied the potential of SERS technique for real time drug release study of lipid based nanomedicine. PMID:27052206

  19. Initial state geometry and fluctuations in Au+Au, Cu+Au and U+U collisions at RHIC

    CERN Document Server

    Schenke, Bjoern; Venugopalan, Raju

    2014-01-01

    We study within the IP-Glasma and two-component MC-Glauber models the effects of initial state geometry and fluctuations on multiplicities and eccentricities for several collision species at the Relativistic Heavy Ion Collider (RHIC). These include copper-gold (Cu+Au), gold-gold (Au+Au), and uranium-uranium (U+U) collisions. The multiplicity densities per participant pair are very similar in all systems studied. Ellipticities vary strongly between collision systems, most significantly for central collisions, while fluctuation driven odd moments vary little between systems. Event-by-event distributions of eccentricities in mid-central collisions are wider in Cu+Au relative to Au+Au and U+U systems. An anti-correlation between multiplicity and eccentricity is observed in ultra central U+U collisions which is weaker in the IP-Glasma model than the two-component MC-Glauber model. In ultra central Au+Au collisions the two models predict opposite signs for the slope of this correlation. Measurements of elliptic flo...

  20. Core-size-dependent catalytic properties of bimetallic Au/Ag core-shell nanoparticles.

    Science.gov (United States)

    Haldar, Krishna Kanta; Kundu, Simanta; Patra, Amitava

    2014-12-24

    Bimetallic core-shell nanoparticles have recently emerged as a new class of functional materials because of their potential applications in catalysis, surface enhanced Raman scattering (SERS) substrate and photonics etc. Here, we have synthesized Au/Ag bimetallic core-shell nanoparticles with varying the core diameter. The red-shifting of the both plasmonic peaks of Ag and Au confirms the core-shell structure of the nanoparticles. Transmission electron microscopy (TEM) analysis, line scan EDS measurement and UV-vis study confirm the formation of core-shell nanoparticles. We have examined the catalytic activity of these core-shell nanostructures in the reaction between 4-nitrophenol (4-NP) and NaBH4 to form 4-aminophenol (4-AP) and the efficiency of the catalytic reaction is found to be increased with increasing the core size of Au/Ag core-shell nanocrystals. The catalytic efficiency varies from 41.8 to 96.5% with varying core size from 10 to 100 nm of Au/Ag core-shell nanoparticles, and the Au100/Ag bimetallic core-shell nanoparticle is found to be 12-fold more active than that of the pure Au nanoparticles with 100 nm diameter. Thus, the catalytic properties of the metal nanoparticles are significantly enhanced because of the Au/Ag core-shell structure, and the rate is dependent on the size of the core of the nanoparticles. PMID:25456348

  1. Synthesis of Au/Graphene Oxide Composites for Selective and Sensitive Electrochemical Detection of Ascorbic Acid

    Science.gov (United States)

    Song, Jian; Xu, Lin; Xing, Ruiqing; Li, Qingling; Zhou, Chunyang; Liu, Dali; Song, Hongwei

    2014-12-01

    In this work, we present a novel ascorbic acid (AA) sensor applied to the detection of AA in human sera and pharmaceuticals. A series of Au nanoparticles (NPs) and graphene oxide sheets (Au NP/GO) composites were successfully synthesized by reduction of gold (III) using sodium citrate. Then the Au NP/GO composites were used to construct nonenzymatic electrodes in practical AA measurement. The electrode that has the best performance presents attractive analytical features, such as a low working potential of +0.15 V, a high sensitivity of 101.86 μA mM-1 cm-2 to AA, a low detection limit of 100 nM, good reproducibility and excellent selectivity. And more,it was also employed to accurately and practically detect AA in human serum and clinical vitamin C tablet with the existence of some food additive. The enhanced AA electrochemical properties of the Au NP/GO modified electrode in our work can be attributed to the improvement of electroactive surface area of Au NPs and the synergistic effect from the combination of Au NPs and GO sheets. This work shows that the Au NP/GO/GCEs hold the prospect for sensitive and selective determination of AA in practical clinical application.

  2. a High-Performance Glucose Biosensor Based on Zno Nanorod Arrays Modified with AU Nanoparticles

    Science.gov (United States)

    Zhang, Gong; Lei, Yang; Yan, Xiaoqin

    2012-08-01

    An amperometric glucose biosensor based on vertically aligned ZnO nanorod (NR) arrays modified with Au nanoparticles (NPs) was constructed in a channel-limited way. Au NPs with diameters in the range of 8-10 nm have been successfully synthesized by photoreduction method and were uniformly loaded onto the surface of ZnO NRs that was hydrothermally deposited on the Fluorine doped SnO2 conductive glass (FTO) via electrostatic self-assembly technique. The morphology and structure of Au/ZnO NR arrays were characterized by field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectrum analyzer (XPS). The electrocatalytic properties of glucose oxidase (GOD)- immobilized Au/ZnO NR arrays were evaluated by amperometry. Compared with the biosensor based on ZnO NR arrays, the resulting Au/ZnO NR arrays modified biosensor exhibited an expanded linear range from 3 μM to 3 mM with the detection limit of 30 nM and a smaller Michaelis-Menten constant of 0.7836 mM. All these results suggest that the Au NPs can greatly improve the biosensing properties of ZnO NR arrays and therefore Au/ZnO NR arrays provide a promising material for the biosensor designs and other biological applications.

  3. Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes.

    Science.gov (United States)

    Zhang, Xuemei; Wu, Xu; Centeno, Anthony; Ryan, Mary P; Alford, Neil M; Riley, D Jason; Xie, Fang

    2016-01-01

    Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that using this photocathode there is a significant increase of the power conversion efficiency (PCE) of a photoelectrochemical solar cell of 100% compared to using a CZTS without Au core. More importantly, the PCE of Au@CZTS photocathode improved by 15.8% compared to standard platinum (Pt) counter electrode. The increased efficiency is attributed to plasmon resonance energy transfer (PRET) between the Au nanoparticle core and the CZTS shell at wavelengths shorter than the localized surface plasmon resonance (LSPR) peak of the Au and the semiconductor bandgap. PMID:26997140

  4. First-principles study of SF6 decomposed gas adsorbed on Au-decorated graphene

    Science.gov (United States)

    Zhang, Xiaoxing; Yu, Lei; Gui, Yingang; Hu, Weihua

    2016-03-01

    We theoretically investigated the decomposed gaseous components of sulfur hexafluoride (SF6), namely, H2S, SO2, SOF2, and SO2F2, adsorbed on pristine and Au-embedded graphene based on the revised Perdew-Burke-Ernzerhof calculation, which empirically includes a dispersion correction (DFT-D) for van der Waals interaction with standard generalized gradient approximation. Pristine graphene exhibits weak adsorption and absence of charge transfer, which indicates barely satisfactory sensing for decomposed components. The Au atom introduces magnetism to the pristine graphene after metal-embedded decoration as well as enhances conductivity. All four molecules induce certain hybridization between the molecules and Au-graphene, which results in chemical interactions. SOF2 and SO2F2 exhibit a strong chemisorption interaction with Au-graphene, while H2S and SO2 exhibit quasi-molecular binding effects. Only H2S exhibits n-type doping to Au-graphene, whereas the rest gases exhibit p-type doping. Magnetic moments fluctuate substantially in the original Au-graphene when H2S and SO2 are adsorbed. While the adsorption effects of SOF2 and SO2F2 generate magnetism quenching. The charge transfer mechanism is also discussed in this paper. These results will shed light on the valuable application of Au-embedded graphene for selective gas sensing and spintronics.

  5. Large extrinsic spin Hall effect in Au-Cu alloys by extensive atomic disorder scattering

    Science.gov (United States)

    Zou, L. K.; Wang, S. H.; Zhang, Y.; Sun, J. R.; Cai, J. W.; Kang, S. S.

    2016-01-01

    Spin Hall angle, which denotes the conversion efficiency between spin and charge current, is a key parameter in the pure spin current phenomenon. The search for materials with large spin Hall angle is indeed important for scientific interest and potential application in spintronics. Here the large enhanced spin Hall effect (SHE) of Au-Cu alloy is reported by investigating the spin Seebeck effect, spin Hall anomalous Hall effect, and spin Hall magnetoresistance of the Y3F e5O12 (YIG)/A uxC u1 -x hybrid structure over the full composition. At the near equiatomic Au-Cu composition with maximum atomic disorder scattering, the spin Hall angle of the Au-Cu alloy increases by two to three times together with a moderate spin diffusion length in comparison with Au. The longitudinal spin Seebeck voltage and the spin Hall magnetoresistance ratio also increase by two to three times. More importantly, no evidence of anomalous Hall effect is observed in all YIG/Au-Cu samples, in contrast to the cases of other giant SHE materials Pt(Pd), Ta, and W. This behavior makes Au-Cu free from any suspicion of the magnetic proximity effect involved in the hybrid structure, and thus the Au-Cu alloy can be an ideal material for pure spin current study.

  6. Efficient H{sub 2} production over Au/graphene/TiO{sub 2} induced by surface plasmon resonance of Au and band-gap excitation of TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yang; Yu, Hongtao [Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, China), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Wang, Hua, E-mail: wanghua@dlou.edu.cn [Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, China), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); School of Fisheries and Life Science, Dalian Ocean University, Dalian 116023 (China); Chen, Shuo [Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, China), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China); Quan, Xie, E-mail: quanxie@dlut.edu.cn [Key Laboratory of Industrial Ecology and Environmental Engineering (Ministry of Education, China), School of Environmental Science and Technology, Dalian University of Technology, Dalian 116024 (China)

    2014-11-15

    Highlights: • Both surface plasmon resonance and band-gap excitation were used for H{sub 2} production. • Au/Gr/TiO{sub 2} composite photocatalyst was synthesized. • Au/Gr/TiO{sub 2} exhibited enhancement of light absorption and charge separation. • H{sub 2} production rate of Au/Gr/TiO{sub 2} was about 2 times as high as that of Au/TiO{sub 2}. - Abstract: H{sub 2} production over Au/Gr/TiO{sub 2} composite photocatalyst induced by surface plasmon resonance of Au and band-gap excitation of TiO{sub 2} using graphene (Gr) as an electron acceptor has been investigated. Electron paramagnetic resonance study indicated that, in this composite, Gr collected electrons not only from Au with surface plasmon resonance but also from TiO{sub 2} with band-gap excitation. Surface photovoltage and UV–vis absorption measurements revealed that compared with Au/TiO{sub 2}, Au/Gr/TiO{sub 2} displayed more effective photogenerated charge separation and higher optical absorption. Benefiting from these advantages, the H{sub 2} production rate of Au/Gr/TiO{sub 2} composite with Gr content of 1.0 wt% and Au content of 2.0 wt% was about 2 times as high as that of Au/TiO{sub 2}. This work represents an important step toward the efficient application of both surface plasmon resonance and band-gap excitation on the way to converting solar light into chemical energy.

  7. Study of Au+Au relativistic collisions with the Fopi-Phase I detector; Etude des collisions relativistes Au+Au avec le detecteur Fopi-Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Dupieux, P.

    1995-01-01

    Au+Au relativistic collisions, in a 100-1000 MeV energy domain per nucleon, are described. Experiments have been carried out with the SIS accelerator at GSI/Darmstadt. Data are analysed with the FOPI-phase I detector. These data are compared with IQMD model (Isospin Quantum Molecular Dynamics) Predictions. (S.G). 80 refs., 77 figs., 5 tabs.

  8. English for au pairs the au pair's guide to learning English

    CERN Document Server

    Curtis, Lucy

    2014-01-01

    English for Au Pairs has interlinked stories about a group of au pairs new to England. Marta, an 18-year-old from Poland arrives in the UK to work as an au pair. Throughout her year-long stay she has many different experiences - some bad, some good - but with the support of her host family she finds new friends and improves her English. English for Au Pairs offers insight into the joys and difficulties of being an au pair while at the same time reinforcing English language learning through grammar explanations and exercises.

  9. Antiproton Production in Au+Au Collisions at 11.7a GeV/c

    International Nuclear Information System (INIS)

    Antiproton production in 11.7A GeV/c Au+Au collisions over a wide transverse-mass coverage was studied using the AGS-E866 experimental apparatus. The mean transverse kinetic energy increases as a function of centrality and is similar to that of protons. The antiproton yields in Si+Al , Si+Au , and Au+Au collisions are consistent with scaling with the 0.7 power of the number of participant nucleons. Copyright 1998, The American Physical Society

  10. Gd doped Au nanoclusters: Molecular magnets with novel properties

    KAUST Repository

    Mokkath, Junais Habeeb

    2014-01-01

    The structural, magnetic, and optical properties of subnanometer Au N and AuN-1Gd1 gas phase clusters (N = 2 to 8) are systematically investigated in the framework of (time-dependent) density functional theory, using the B3LYP hybrid exchange correlation functional. The size dependent evolution of the gap between the highest occupied and lowest unoccupied molecular orbitals, the magnetism, and the absorption spectra are studied. The simultaneous appearance of large magnetic moments, significant band gaps, and plasmon resonances in the visible spectral region leads to novel multi-functional nanomaterials for applications in drug delivery, magnetic resonance imaging, and photo-responsive agents. © 2013 Elsevier B.V. All rights reserved.

  11. AU-EU “Strategic Partnership”

    DEFF Research Database (Denmark)

    Rodt, Annemarie Peen; Okeke, Jide

    2013-01-01

    This article appraises strategic partnership between the African Union (AU) and European Union (EU). It examines the context and nature of AU and EU security relations and explores the conditions under which partnership has a positive impact in this regard. This includes an evaluation of converge......This article appraises strategic partnership between the African Union (AU) and European Union (EU). It examines the context and nature of AU and EU security relations and explores the conditions under which partnership has a positive impact in this regard. This includes an evaluation...... of convergence between the two organizations and its effect or lack thereof on African security. The article concludes that events leading up to and initiatives following the 2007 Joint Africa–European Union Strategy have produced a degree of AU and EU convergence, which has had limited impact on the efficacy...

  12. Simulation et gestion des risques en planification distribuée de chaînes logistiques : application au secteur de l'électronique et des télécommunications

    OpenAIRE

    Mahmoudi, Jaouher

    2006-01-01

    Dans un contexte économique et industriel changeant rapidement, cette thèse présente une approche d’aide à la coopération pour la planification distribuée des capacités au sein d’une chaîne logistique. Nous proposons un outil de simulation permettant l’évaluation de comportements de planification des partenaires plus ou moins coopératifs, pour différents scénarios de comportement du marché. En se basant sur les théories de la décision et des jeux, nous introduisons ensuite une évaluation des ...

  13. Systèmes d'Information Scientifique : des modèles conceptuels aux annotations sémantiques Application au domaine de l'archéologie et des sciences du vivant

    OpenAIRE

    Savonnet, Marinette

    2013-01-01

    Les Systèmes d'Information Scientifique (SIS) sont des Systèmes d'Information (SI) dont le but est de produire de la connaissance et non pas de gérer ou contrôler une activité de production de biens ou de services comme les SI d'entreprise. Les SIS se caractérisent par des domaines de recherche fortement collaboratifs impliquant des équipes pluridisciplinaires et le plus souvent géographiquement éloignées, ils manipulent des données aux structures très variables dans le temps qui vont au-delà...

  14. Attitudes et consentement à payer des consommateurs vis-à-vis du bien-être animal : une application au cas de la viande bovine en France et en Espagne

    OpenAIRE

    Weisslinger, Delphine

    2015-01-01

    L’intérêt pour le bien-être animal (BEA) se manifeste de plus en plus dans nos sociétés européennes, et peut conduire à de nouvelles attentes de la part les consommateurs. Cette étude s’intéresse aux attitudes et au Consentement à Payer (CAP) des consommateurs pour de la viande bovine certifiée « respectueuse du BEA », à l’aide d’une enquête menée auprès de 1213 consommateurs répartis dans quatre régions en France et en Espagne. La mesure des degrés d’importance et de confiance accordés à 11 ...

  15. Contribution à l'étude de la couverture des scénarios de tests de systèmes critiques - Application au système de signalisation ferroviaire ERTMS/ETCS

    OpenAIRE

    JABRI,S; YIM,P; El-Koursi, Em; Lemaire, E; BOURDEAUD'HUY,T

    2007-01-01

    Afin de lever les obstacles à la circulation des trains à travers le réseau ferroviaire européen, la Commission Européenne a encouragé la mise au point d'un système de contrôle commande et de signalisation qui soit commun à tous les réseaux des états membres : le système ERTMS (European Rail Trafic Management System). L'une de ses composantes est le système de contrôle et de commande des trains nommé ETCS (European Train Control System) qui est déployé sur plusieurs lignes ERTMS en Europe. Le...

  16. Construction de la demande en eau agricole au niveau régional en intégrant le comportement des agriculteurs. Application aux exploitations agricoles collectives de la Mitidja-Ouest (Algérie)

    OpenAIRE

    Imache, Amar

    2008-01-01

    La gestion intégrée de l'eau au sein d'un territoire doit tenir compte de la demande des usagers. En agriculture irriguée, la demande en eau est un construit social déterminé à la fois par les besoins des cultures, par l'offre mais aussi par les contraintes de l'agriculteur. En l'absence d'institutions fortes qui permettent de faire reconnaître ces contraintes, il est difficile d'établir des règles de gestion profitables à tous. Sur le territoire irrigué de la Mitidja-ouest en Algérie, notre ...

  17. Rôle des matériaux-supports sur la mise en place du biofilm : Application au démarrage d’un procédé de méthanisation

    OpenAIRE

    Habouzit, Frederic

    2010-01-01

    Dans les systèmes anaérobies de traitement d'eaux usées, la biomasse microbienne complexe incluant archées et bactéries peut être maintenue au sein du procédé par l'adhésion aux supports solides sous forme de biofilm. Le but de ce travail est d'évaluer l'impact des propriétés des matériaux supports sur l’adhésion et la colonisation du consortium méthanogène. Différents matériaux (le polyéthylène, le polypropylène, le chlorure de polyvinyle, l’acrylonitrile butadiène styrène, le polycarbonate,...

  18. Institutions et régulation d'une ressource naturelle dans une société fragmentée : Théorie et applications à une gestion durable de l'eau au Liban.

    OpenAIRE

    Riachi, Roland,

    2013-01-01

    Cette thèse analyse les fondements et l'évolution de l'économie et de la gestion de l'eau au Liban dans ses cadres juridiques, institutionnels et politiques. L'étude s'appuie sur une méthodologie mixte, à la fois qualitative, à travers des études de terrains et celle de la littérature existante, et quantitative, en utilisant des outils d'analyse économétrique. Nous avons pris comme grille de lecture les liens entre les modes de production et d'usage de l'eau, la nature de la propriété foncièr...

  19. Le curriculum scolaire au Chili

    OpenAIRE

    Cox, Cristián

    2012-01-01

    L’article examine l’usage historique du terme « curriculum » au Chili. Il aborde la configuration actuelle de la prescription curriculaire nationale : des « objectifs et contenus minimums », des « programmes d’études », et des « cartes de progrès des apprentissages ». On y décrit les institutions et les processus qui rendent compte de la genèse des définitions curriculaires en vigueur en 2010. Elles sont le résultat de deux étapes de réformes caractérisées par des processus consultatifs et pa...

  20. Des fluides au grand fleuve

    OpenAIRE

    Arrago-Boruah, Émilie

    2016-01-01

    À Guwahati, capitale de l’Assam, le fleuve Brahmapoutre s’inscrit depuis quelques décennies dans le paysage urbain comme un élément essentiellement esthétique. Avant cela, il a été le théâtre de multiples affrontements, comme avec les Moghols au xviie siècle, puis la voie d’acheminement préférée de l’East India Company pour exporter les richesses de la région jusqu’à Calcutta. Pour retracer cette évolution, la lecture d’un texte ancien en sanskrit permet d’établir une comparaison entre le fle...

  1. Portraits de femmes au Biafra

    OpenAIRE

    Ugochukwu, Françoise

    2011-01-01

    Cette étude considère l’impact de la guerre civile nigériane sur la vie quotidienne et les relations interpersonnelles des Biafrais telle qu’elle est présentée dans Femmes en guerre et autres nouvelles d’Achebe et Blow the Fire de Leslie Ofoegbu. Ces deux écrivains, dont l’un, déjà traduit dans plusieurs langues, a été le premier à projeter le pays igbo sur la scène internationale, et dont l’autre est une Écossaise mariée à un Nigérian et qui vécut au Biafra pendant les années de guerre, offr...

  2. Au, Ag and Au:Ag colloidal nanoparticles synthesized by pulsed laser ablation as SERS substrates

    Institute of Scientific and Technical Information of China (English)

    M. Vinod; K.G.Gopchandran

    2014-01-01

    Chemically pure colloidal suspensions of gold and silver nanoparticles were synthesized using pulsed laser ablation. The dependence of laser fluence on the surface plasmon characteristics of the nanoparticles was investigated. Au:Ag colloidal suspensions were prepared by mixing highly monodisperse Au and Ag nanocolloids. The plasmon band of these mixtures was found to be highly sensitive to Au:Ag concentration ratio and wavelength of the laser beam used in the ablation process. The Au:Ag mixture consists of almost spherical shaped nanostructures with a tendency to join with adjacent ones. The surface enhanced Raman scattering activity of the Au, Ag and Au:Ag colloidal suspensions was tested using crystal violet as probe molecules. Enhancement in Raman signal obtained with Au:Ag substrates was found to be promising and strongly depends on its plasmon characteristics.

  3. Au, Ag and Au:Ag colloidal nanoparticles synthesized by pulsed laser ablation as SERS substrates

    Directory of Open Access Journals (Sweden)

    M. Vinod

    2014-12-01

    Full Text Available Chemically pure colloidal suspensions of gold and silver nanoparticles were synthesized using pulsed laser ablation. The dependence of laser fluence on the surface plasmon characteristics of the nanoparticles was investigated. Au:Ag colloidal suspensions were prepared by mixing highly monodisperse Au and Ag nanocolloids. The plasmon band of these mixtures was found to be highly sensitive to Au:Ag concentration ratio and wavelength of the laser beam used in the ablation process. The Au:Ag mixture consists of almost spherical shaped nanostructures with a tendency to join with adjacent ones. The surface enhanced Raman scattering activity of the Au, Ag and Au:Ag colloidal suspensions was tested using crystal violet as probe molecules. Enhancement in Raman signal obtained with Au:Ag substrates was found to be promising and strongly depends on its plasmon characteristics.

  4. Supported Pd-Au Membrane Reactor for Hydrogen Production: Membrane Preparation, Characterization and Testing.

    Science.gov (United States)

    Iulianelli, Adolfo; Alavi, Marjan; Bagnato, Giuseppe; Liguori, Simona; Wilcox, Jennifer; Rahimpour, Mohammad Reza; Eslamlouyan, Reza; Anzelmo, Bryce; Basile, Angelo

    2016-01-01

    A supported Pd-Au (Au 7wt%) membrane was produced by electroless plating deposition. Permeation tests were performed with pure gas (H₂, H₂, N₂, CO₂, CH₄) for long time operation. After around 400 h under testing, the composite Pd-Au membrane achieved steady state condition, with an H₂/N₂ ideal selectivity of around 500 at 420 °C and 50 kPa as transmembrane pressure, remaining stable up to 1100 h under operation. Afterwards, the membrane was allocated in a membrane reactor module for methane steam reforming reaction tests. As a preliminary application, at 420 °C, 300 kPa of reaction pressure, space velocity of 4100 h(-1), 40% methane conversion and 35% hydrogen recovery were reached using a commercial Ni/Al₂O₃ catalyst. Unfortunately, a severe coke deposition affected irreversibly the composite membrane, determining the loss of the hydrogen permeation characteristics of the supported Pd-Au membrane. PMID:27171067

  5. Origin of the p-type character of AuCl3 functionalized carbon nanotubes

    KAUST Repository

    Murat, Altynbek

    2014-02-13

    The microscopic origin of the p-type character of AuCl3 functionalized carbon nanotubes (CNTs) is investigated using first-principles self-interaction corrected density functional theory (DFT). Recent DFT calculations suggest that the p-type character of AuCl3 functionalized CNTs is due to the Cl atoms adsorbed on the CNTs. We test this hypothesis and show that adsorbed Cl atoms only lead to a p-type character for very specific concentrations and arrangements of the Cl atoms, which furthermore are not the lowest energy configurations. We therefore investigate alternative mechanisms and conclude that the p-type character is due to the adsorption of AuCl4 molecules. The unraveling of the exact nature of the p-doping adsorbates is a key step for further development of AuCl3 functionalized CNTs in water sensor applications. © 2014 American Chemical Society.

  6. Ballistic-electron-emission microscopy of subsurface defects at the Au-GaAs(100) interface

    Science.gov (United States)

    Hecht, M. H.; Bell, L. D.; Kaiser, W. J.

    1989-01-01

    The application of ballistic-electron-emission microscopy (BEEM) to a study of the influence of GaAs(100) substrate conditions on the formation of a multidefect structure at the Au-GaAs(100) Schottky barrier interface is described. Interfaces prepared on both melt-grown GaAs(100) wafer substrates and MBF-deposited GaAs(100) buffer layers are considered. As a comparison to the study of Au-GaAs(100) interfaces, BEEM imaging is performed on Au-Si(100) interfaces. It is noted that Au-GaAs(100) interface formation is relatively insensitive to the effects of substrate surface condition and substrate bulk defect density, and that the combination of BEEM imaging and BEEM spectroscopy indicates that the heterogeneous interface defects are the result of diffusion between the Schottky barrier electrodes.

  7. Complete Au@ZnO core-shell nanoparticles with enhanced plasmonic absorption enabling significantly improved photocatalysis.

    Science.gov (United States)

    Sun, Yiqiang; Sun, Yugang; Zhang, Tao; Chen, Guozhu; Zhang, Fengshou; Liu, Dilong; Cai, Weiping; Li, Yue; Yang, Xianfeng; Li, Cuncheng

    2016-05-19

    Nanostructured ZnO exhibits high chemical stability and unique optical properties, representing a promising candidate among photocatalysts in the field of environmental remediation and solar energy conversion. However, ZnO only absorbs the UV light, which accounts for less than 5% of total solar irradiation, significantly limiting its applications. In this article, we report a facile and efficient approach to overcome the poor wettability between ZnO and Au by carefully modulating the surface charge density on Au nanoparticles (NPs), enabling rapid synthesis of Au@ZnO core-shell NPs at room temperature. The resulting Au@ZnO core-shell NPs exhibit a significantly enhanced plasmonic absorption in the visible range due to the Au NP cores. They also show a significantly improved photocatalytic performance in comparison with their single-component counterparts, i.e., the Au NPs and ZnO NPs. Moreover, the high catalytic activity of the as-synthesized Au@ZnO core-shell NPs can be maintained even after many cycles of photocatalytic reaction. Our results shed light on the fact that the Au@ZnO core-shell NPs represent a promising class of candidates for applications in plasmonics, surface-enhanced spectroscopy, light harvest devices, solar energy conversion, and degradation of organic pollutants. PMID:27160795

  8. Cells for the examination of irradiated plutonium fuel elements - two years operation - may 1961/may 1963 (1963); Cellules pour examen d'elements combustibles au plutonium irradies - deux ans d'exploitation - mai 1961/mai 1963 (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Valentin, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    Within the framework of the 'Rapsodie' fast reactor program, prototype plutonium fuel elements are irradiated and then examined in an {alpha} {beta} {gamma} laboratory at Saclay. This laboratory consists of five in line cells and a lead enclosure microscope. Each cell contains an {alpha} sealed removable box 4 ft 3 in. high, 4 ft 11 in. wide and 5 ft 1 in. deep, fitted with one or two magnetic transmission indirect manipulators. The boxes are contained in an {beta} {gamma} shielded enclosure whose front face is constructed of cast iron panels 21-2/3 in. thick. Nitrogen circulating in a closed loop forms the atmosphere of the boxes. This laboratory is essentially intended for metallurgical research. The functions of the various cells are as follows: transferring and packing, cutting, density measurement and cathodic etching, storage and metallography. Work on radioactive materials began in April 1961. Operational incidents have always been of a material nature only. (author) [French] Dans le cadre du projet de reacteur rapide Rapsodie, des elements combustibles prototypes au plutonium sont, apres irradiation, examines a Saclay dans un laboratoire {alpha} {beta} {gamma}. Celui-ci comprend cinq cellules en ligne et une enceinte en plomb contenant un microscope telecommande. Chaque cellule est constituee d'un caisson etanche (1, 3 m x 1, 5 m x 1, 56m) equipee d'un ou deux manipulateurs indirects a transmissions magnetiques. Les caissons sont places, dans une enceinte {beta} {gamma} dont la face avant est formee de blocs en fonte ayant 55 cm d'epaisseur. L'atmosphere des caissons est de l'azote, circulant en circuit ferme. Ce laboratoire est destine essentiellement a des recherches metallurgiques. Les fonctions des differentes cellules sont: conditionnement et transferts, tronconnage, mesure de densite et polissage ionique, stockage, metallographie. Le travail sur materiaux radioactifs a commence en avril 1961. Les incidents d

  9. Mise en œuvre de deux méthodes interférométriques pour la caractérisation mécanique des films minces par l'essai de gonflement. Applications au cas du silicium monocristallin

    OpenAIRE

    Bonnotte, E.; Delobelle, P.; Bornier, L.; Trolard, B.; Tribillon, G.

    1995-01-01

    Deux méthodes optiques sont présentées, interférométrie holographique en temps réel et méthode par projection de franges, appliquées à la caractérisation mécanique des films minces. Ces deux méthodes sont couplées à l'interférométrie par mesure de phase, ce qui permet d'accéder au champ des déplacements en tous points de la membrane. Les solutions retenues sont discutées en termes de précision et de sensibilité. Nous proposons l'application de ces méthodes à l'essai de gonflement de membrane,...

  10. Direct electrochemical oxidation of S-captopril using gold electrodes modified with graphene-AuAg nanocomposites

    Directory of Open Access Journals (Sweden)

    Pogacean F

    2014-02-01

    was determined to be well-defined, even at relatively low concentration (10-5 M, for the Au/Gr-AuAg-1.5 electrode. In contrast, the signals recorded with the Au/Gr-AuAg-1 electrode were poorly defined within a 5×10-6 to 5×10-3 M concentration range, and many of them overlapped with the background. Such composite materials could find significant applications in nanotechnology, sensing, or nanomedicine. Keywords: bimetallic AuAg nanoparticles, electrochemical detection, multi-layer graphene

  11. Controlled Synthesis of Au@AgAu Yolk-Shell Cuboctahedra with Well-Defined Facets.

    Science.gov (United States)

    Londono-Calderon, Alejandra; Bahena, Daniel; Yacaman, Miguel J

    2016-08-01

    The synthesis of Au@AgAu yolk-shell cuboctahedra nanoparticles formed by galvanic replacement in a seed-mediated method is described. Initially, single-crystal Au seeds are used for the formation of Au@Ag core-shell nanocubes, which serve as the template material for the deposition of an external Au layer. The well-controlled synthesis yields the formation of cuboctahedra nanoparticles with smooth inner and outer Au/Ag surfaces. The deposition/oxidation process is described to understand the formation of cuboctahedra and octahedra nanoparticles. The Au core maintains the initial morphology of the seed and remains static at the center of the yolk-shell because of residual Ag. Structural analysis of the shell indicates intrinsic stacking faults (SFs) near the surface. Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) compositional analysis show an Au-Ag nonordered alloy forming the shell. The three-dimensional structure of the nanoparticles presented open facets on the [111] as observed by electron tomography SIRT reconstruction over a stack of high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. The geometrical model was validated by analyzing the direction of streaks in coherent nanobeam diffraction (NBD). The catalytic activity was evaluated using a model reaction based on the reduction of 4-nitrophenol (4-NTP) by NaBH4 in the presence of Au@AgAu yolk-shell nanoparticles. PMID:27385583

  12. Être notable au Maghreb

    OpenAIRE

    Abouhani, Abdelghani; Amri-Salameh, Nelly; Blili, Leïla; Boubrik, Rahal; Boujarra, Hussein; Cattedra, Raffaele; CATUSSE, Myriam; Cheraï, Ahmed; Ettayeb, Mahmoud; Feneyrol, Olivier; Hénia, Abdelhamid; Jaïdi, Houcine; Kenbib, Mohammed; Khouaja, Ahmed; Lafi, Nora

    2014-01-01

    Le discours dominant dans les pays du Maghreb continue de stigmatiser les figures de notables dits traditionnels au nom de la modernité. L’usage scientifique de la notion de notable n’est pas pour autant disqualifié. Le présent ouvrage s’intéresse au système élitaire au Maghreb sur la longue durée, de l’Antiquité à nos jours. Il en étudie la dynamique en rapport avec les formes historiques du pouvoir et montre comment la notabilité a pris avec le temps des figures changeantes et des nominatio...

  13. Innovation et recomposition territoriale au Maroc

    OpenAIRE

    Boujrouf, Saïd

    2013-01-01

    Introduction Les processus de recomposition territoriale au Maroc se caractérisent par une dynamique continue, reflet des grands changements qui ont affecté les différents secteurs du pays au cours du xxe siècle. Le renouvellement territorial au Maroc est un processus de recomposition permanent, depuis les trames traditionnelles (qu’elles soient tribale, confessionnelle liée aux confréries ou encore « seigneuriale » caïdale) jusqu’aux maillages territoriaux les plus récents en communes et rég...

  14. Au40: A Large Tetrahedral Magic Cluster

    OpenAIRE

    Jiang, De-en; Walter, Michael

    2011-01-01

    40 is a magic number for tetrahedral symmetry predicted in both nuclear physics and the electronic jellium model. We show that Au40 could be such a a magic cluster from density functional theory-based basin hopping for global minimization. The putative global minimum found for Au40 has a twisted pyramid structure, reminiscent of the famous tetrahedral Au20, and a sizable HOMO-LUMO gap of 0.69 eV, indicating its molecular nature. Analysis of the electronic states reveals that the gap is relate...

  15. Au40: A large tetrahedral magic cluster

    Science.gov (United States)

    Jiang, De-En; Walter, Michael

    2011-11-01

    40 is a magic number for tetrahedral symmetry predicted in both nuclear physics and the electronic jellium model. We show that Au40 could be such a a magic cluster from density functional theory-based basin hopping for global minimization. The putative global minimum found for Au40 has a twisted pyramid structure, reminiscent of the famous tetrahedral Au20, and a sizable HOMO-LUMO gap of 0.69 eV, indicating its molecular nature. Analysis of the electronic states reveals that the gap is related to shell closings of the metallic electrons in a tetrahedrally distorted effective potential.

  16. Becoming independent through au pair migration

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    article argues that, despite this critique, au pairing does play an important formative role for young Filipinas because it opens up for experiences abroad that enable them to be recognised as independent adults in Philippine society. Rather than autonomy, however, au pairs define their independence in...... terms of their capacity to assume responsibility for others, thereby achieving a position of social respect. Based on ethnographic fieldwork in Denmark and the Philippines, this article explores how young Filipinas use the social, economic, and cultural resources they gain from their au pair stay abroad...

  17. Les possibilités des turbines de détente dans les industries gazière et pétrolière Application of Expansion Turbines in the Gas and Oil Industry

    Directory of Open Access Journals (Sweden)

    Verneau A.

    2006-11-01

    Full Text Available Utilisées depuis longtemps dans l'industrie cryogénique, les turbines de détente voient leur intérêt augmenter actuellement en tant que turbines de récupération de l'énergie des laminages. Cette énergie peut servir à l'entraînement de compresseurs, pompes ou générateurs électriques. Il existe surtout des turbines dans la gamme de 200 à 20 000 ch. Deux types principaux sont développés : les turbines axiales et les turbines radiales. Les particularités techniques et les domaines d'emploi de chaque type sont discutés. Ue intérêt particulier est porté au domaine des petites puissances (de 100 kW jusqu'à quelques centaines de watts. L'évolution du rendement en fonction de la puissance est étudiée et quelques types spéciaux bien adaptés à cette gamme, tels que les turbines périphériques, sont présentés. Quelques indications sur la récupération de l'énergie des liquides par turbines sont également données. Ensuite, plusieurs exemples d'applications sont exposés tels que : récupération de fractions condensables du gaz naturel (butane, propane, éthane, récupération de gaz perdu, récupération de l'énergie des laminages lors de la distribution et au niveau des stockages souterrains, turbine hydraulique de lavage de gaz, récupération de l'énergie des fumées de cracking catalytique, entraînement de petits générateurs électriques dans la gamme de quelques kilowatts à quelques centaines de watts. Enfin, nous abordons la technologie et les dispositions constructives particulières en nous attachant plus spécialement aux problèmes de régulation, étanchéité, paliers. Des techniques nouvelles telles que l'emploi de paliers à gaz et leurs avantages sont décrites. Les difficultés dues aux basses températures et à la condensation sont examinées. Nous terminons par quelques considérations d'ordre économique destinées à prévoir la rentabilité d'une installation de récupération d

  18. Synthesis of ultrathin face-centered-cubic Au@Pt and Au@Pd core-shell nanoplates from hexagonal-close-packed Au square sheets

    KAUST Repository

    Fan, Zhanxi

    2015-03-17

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f-oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures. Phase change: Ultrathin Au@Pt and Au@Pd core-shell nanoplates were prepared from Au square sheets. A phase transformation from hexagonal close-packed (hcp) to face-centered cubic (fcc) is observed upon coating the hcp Au square sheets with Pt or Pd under ambient conditions. The prepared fcc Au@Pt and Au@Pd rhombic nanoplates demonstrate unique (101)f orientation (picture shows a typical fcc Au@Pt rhombic nanoplate). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Growth and size distribution of Au nanoparticles in annealed Au/TiO2 thin films

    International Nuclear Information System (INIS)

    Nanocomposites consisting of noble metal nanoparticles (NPs) embedded in TiO2 thin films are of great interest for applications in optoelectronics, photocatalysis and solar-cells for which the plasmonic properties of the metal NPs play a major role. This work investigates the first stages of the formation of gold NPs by thermal annealing of Au-doped TiO2 thin films grown by magnetron sputtering. A low concentration of gold in the films is considered (5 at.%) in order to study the first stages of the formation of the NPs. Raman spectroscopy is used to follow the crystallization of TiO2 when increasing the annealing temperature. In addition, low-frequency Raman scattering (LFRS) is used to investigate the formation of gold NPs and to determine their size. Resonant LFRS measurements obtained by using a laser wavelength matching the surface plasmon resonance of the metallic NPs significantly enhances the Raman peak intensity enabling to focus on the first stages of the NPs formation. A double size distribution is observed at Ta = 800 °C calling for additional investigations by transmission electron microscopy (TEM). TEM observations reveal an inhomogeneous in-depth size distribution of gold NPs. The annealed films are structured in two sublayers with bigger NPs at the bottom and smaller NPs at the top. At Ta = 800 °C, a double size distribution is confirmed near the surface. A mechanism is proposed to explain the formation of the sublayers. The modification of the diffusion of gold atoms by stresses in the film near the substrate is assumed to be responsible for the observed two layers structure. - Highlights: • Gold-doped TiO2 thin films were grown by magnetron sputtering. • The first stages of the formation of Au nanoparticles after annealing are studied. • Au nanoparticles and crystallized TiO2 are observed above 400 °C. • The size distribution of the gold nanoparticles is complex and depth-dependent

  20. Rhodamine B immobilized on hollow Au-HMS material for naked-eye detection of Hg2+ in aqueous media.

    Science.gov (United States)

    Zhang, Na; Li, Gang; Cheng, Zhuhong; Zuo, Xiujin

    2012-08-30

    A simple, effective method has been demonstrated to immobilize Rhodamine B (RhB) probes on mesoporous silica (Au-HMS). The prepared chemosensor (Au-HMS-Probe) was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), UV-vis spectrum and Fourier transform infrared spectroscopy (FT-IR). Further application of Au-HMS-Probe in sensing Hg(2+) was confirmed by fluorescence titration experiment. Au-HMS-Probe afforded "turn-on" fluorescence enhancement and displayed high brightness in water, and it also showed excellent selectivity for Hg(2+) over alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)) and other heavy metal ions (Ag(+), Cd(2+), Co(2+), Pb(2+), Ni(2+), Cu(2+), Fe(2+)). Importantly, Au-HMS-Probe could be regenerated by treatment with tetrapropylammonium hydroxide solution. PMID:22771346

  1. Et pourquoi pas au CERN ?

    CERN Multimedia

    Staff Association

    2015-01-01

    Télétravail ou travail à distance, aménagement des horaires de travail et autres évolutions favorables à un meilleur équilibre vie privée et vie professionnelle sont adoptés par nombre d’entreprises et d’organisations !   Rendu possible grâce au développement de nouvelles technologies dont Internet, le travail à distance séduit de plus en plus de personnels, ainsi que de plus en plus de sociétés qui y trouvent des avantages en matière de gestion de l’espace, de sécurité (moins de trajets domicile-entreprise), de développement durable (moins de pollution), de motivation et de bien-être de leurs personnels. Les horaires aménagés, voire les « core-hours1 », sont également des pratiques de plus e...

  2. Studying of the photoluminescence characteristics of Au(0)@Au(I)-thiolate core–shell nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Zou, Lu; Zhang, Liquan; Wang, Yinghui, E-mail: yinghui-wang@jlu.edu.cn; Yuan, Qilin; Liu, Qinghui [Jilin University, Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics (China); Wang, Yu [Jilin University, State Key Laboratory on Integrated Optoelectronics, and College of Electronic Science and Engineering (China); Sui, Ning; Kang, Zhihui [Jilin University, Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics (China); Liu, Wenyan; Yu, William W.; Zhang, Yu, E-mail: yuzhang@jlu.edu.cn [Jilin University, State Key Laboratory on Integrated Optoelectronics, and College of Electronic Science and Engineering (China); Li, Xuecong [Tianjin Polytechnic University, School of Science (China); Zhang, Hanzhuang, E-mail: zhanghz@jlu.edu.cn [Jilin University, Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics (China)

    2015-12-15

    The photoluminescence characteristics of Au(0)@Au(I)-thiolate Core–shell nanoclusters (Au-NCs), whose size is <2 nm, are investigated. We use the time-resolved single-photon counting technique and the transient absorption technique to distinguish the mechanism of the photoluminescence of Au-NCs. The dynamic spectral data show that the photoluminescence mechanism should be composed of the fluorescence and the phosphorescence. Meanwhile, Au-NCs have the aggregation induced photoluminescence enhancement property, which is attributed to the suppression of conversion from the singlet state to triplet state when they aggregated together. In addition, the photoluminescence characteristics of aggregated Au-NCs should be further improved through infiltrating them into photonic crystals.

  3. Studying of the photoluminescence characteristics of Au(0)@Au(I)-thiolate core–shell nanoclusters

    International Nuclear Information System (INIS)

    The photoluminescence characteristics of Au(0)@Au(I)-thiolate Core–shell nanoclusters (Au-NCs), whose size is <2 nm, are investigated. We use the time-resolved single-photon counting technique and the transient absorption technique to distinguish the mechanism of the photoluminescence of Au-NCs. The dynamic spectral data show that the photoluminescence mechanism should be composed of the fluorescence and the phosphorescence. Meanwhile, Au-NCs have the aggregation induced photoluminescence enhancement property, which is attributed to the suppression of conversion from the singlet state to triplet state when they aggregated together. In addition, the photoluminescence characteristics of aggregated Au-NCs should be further improved through infiltrating them into photonic crystals

  4. Charged hadron transverse momentum distributions in Au+Au collisions at S=200 GeV

    Science.gov (United States)

    Roland, Christof; PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Barton, D. S.; Betts, R. R.; Ballintijn, M.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Michałowski, J.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steadman, S. G.; Steinberg, P.; Stephans, G. S. F.; Stodulski, M.; Sukhanov, A.; Tang, J.-L.; Teng, R.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wadsworth, B.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    2003-03-01

    We present transverse momentum distributions of charged hadrons produced in Au+Au collisions at sqrt(s_NN) = 200 GeV. The evolution of the spectra for transverse momenta p_T from 0.25 to 5GeV/c is studied as a function of collision centrality over a range from 65 to 344 participating nucleons. We find a significant change of the spectral shape between proton-antiproton and peripheral Au+Au collisions. Comparing peripheral to central Au+Au collisions, we find that the yields at the highest p_T exhibit approximate scaling with the number of participating nucleons, rather than scaling with the number of binary collisions.

  5. Comparative efficiencies of photothermal destruction of malignant cells using antibody-coated silica@Au nanoshells, hollow Au/Ag nanospheres and Au nanorods

    Science.gov (United States)

    Cheng, Fong-Yu; Chen, Chen-Tai; Yeh, Chen-Sheng

    2009-10-01

    Three Au-based nanomaterials (silica@Au nanoshells, hollow Au/Ag nanospheres and Au nanorods) were evaluated for their comparative photothermal efficiencies at killing three types of malignant cells (A549 lung cancer cells, HeLa cervix cancer cells and TCC bladder cancer cells) using a CW NIR laser. Photodestructive efficiency was evaluated as a function of the number of nanoparticles required to destroy the cancer cells under 808 nm laser wavelength at fixed laser power. Of the three nanomaterials, silica@Au nanoshells needed the minimum number of particles to produce effective photodestruction, whereas Au nanorods needed the largest number of particles. Together with the calculated photothermal conversion efficiency, the photothermal efficiency rankings are silica@Au nanoshells > hollow Au/Ag nanospheres > Au nanorods. Additionally, we found that HeLa cells seem to present better heat tolerance than the other two cancer cell lines.

  6. Electrical conduction through self-assembled monolayers in molecular junctions: Au/molecules/Au versus Au/molecule/PEDOT:PSS/Au

    International Nuclear Information System (INIS)

    We fabricated and characterized a large number of octanedithiol (denoted as DC8) molecular devices as vertical metal-molecule-metal structure with or without using an intermediate conducting polymer layer of poly (3,4-ethylenedioxythiophene) stabilized with poly(4-styenesulfonic acid) (called as PEDOT:PSS). The electronic transport properties of DC8 molecular devices with and without PEDOT:PSS layer were statistically compared in terms of current density and device yield. The yields of the working molecular devices were found to be ∼ 1.75% (84 out of 4800 devices) for Au/DC8/Au junctions and ∼ 58% (74 out of 128 devices) for Au-DC8/PEDOT:PSS/Au junctions. The tunneling decay constants were obtained with the Simmons tunneling model and a multibarrier tunneling model for two kinds of molecular devices with and without PEDOT:PSS layer.

  7. 3D Interdigital Au/MnO2 /Au Stacked Hybrid Electrodes for On-Chip Microsupercapacitors.

    Science.gov (United States)

    Hu, Haibo; Pei, Zhibin; Fan, Hongjin; Ye, Changhui

    2016-06-01

    On-chip microsupercapacitors (MSCs) have application in powering microelectronic devices. Most of previous MSCs are made from carbon materials, which have high power but low energy density. In this work, 3D interdigital Au/MnO2 /Au stacked MSCs have been fabricated based on laser printed flexible templates. This vertical-stacked electrode configuration can effectively increase the contact area between MnO2 active layer and Au conductive layer, and thus improve the electron transport and electrolyte ion diffusion, resulting in enhanced pseudocapacitive performance of MnO2 . The stacked electrode can achieve an areal capacitance up to 11.9 mF cm(-2) . Flexible and all-solid-state MSCs are assembled based on the sandwich hybrid electrodes and PVA/LiClO4 gel electrolyte and show outstanding high-rate capacity and mechanical flexibility. The laser printing technique in this work combined with the physical sputtering and electrodeposition allows fabrication of MSC array with random sizes and patterns, making them promising power sources for small-scale flexible microelectronic energy storage systems (e.g., next-generation smart phones). PMID:27116677

  8. Proton channeling in Au at low energies

    International Nuclear Information System (INIS)

    The electronic energy loss for low velocity protons channeled in the direction single crystal Au is calculated. The spatial distribution of valence electronic density in Au is calculated using Tight Binding Linear Muffin Tin Method. The proton trajectories are determined by numerical integration of the classical motion equation, and the energy loss is evaluated using the calculated valence electronic density in the friction term. The results allow to describe qualitatively the non linear behavior of energy loss with ion velocity observed experimentally. (author)

  9. Electrochemical Characterization of Protein Adsorption onto YNGRT-Au and VLGXE-Au Surfaces

    OpenAIRE

    Hanna Trzeciakiewicz; Jose Esteves-Villanueva; Rania Soudy; Kamaljit Kaur; Sanela Martic-Milne

    2015-01-01

    The adsorption of the proteins CD13, mucin and bovine serum albumin on VLGXE-Au and YNGRT-Au interfaces was monitored by electrochemical impedance spectroscopy in the presence of [Fe(CN)6]3−/4−. The hydrophobicity of the Au surface was tailored using specific peptides, blocking agents and diluents. The combination of blocking agents (ethanolamine or n-butylamine) and diluents (hexanethiol or 2-mercaptoethanol) was used to prepare various peptide-modified Au surfaces. Protein adsorption onto t...

  10. Photoelectrochemical sensing of 4-chlorophenol based on Au/BiOCl nanocomposites.

    Science.gov (United States)

    Yan, Pengcheng; Xu, Li; Xia, Jiexiang; Huang, Yan; Qiu, Jingxia; Xu, Qian; Zhang, Qi; Li, Huaming

    2016-08-15

    The Au/BiOCl composites have been prepared by a facile one-pot ethylene glycol (EG) assisted solvothermal reaction in the presence of ionic liquid 1-hexadecyl-3-methylimidazolium chloride ([C16mim]Cl). During the synthesis procedure, the [C16mim]Cl has been used as Cl source, solvent of this system, and dispersing agent to effectively disperse Au on the surface of BiOCl. The as-prepared samples have been systematically characterized by multiple instruments to investigate the structure, morphology, and photoelectrochemical properties. According to the photoelectrochemical data, the Au/BiOCl composites exhibit better photoelectrochemical performance toward the detection of 4-chlorophenol than that of the pure BiOCl. The photocurrent response of Au/BiOCl modified electrode is high and stable under light irradiation. The proposed Au/BiOCl modified electrode shows a wide linear response ranging from 0.16 to 20mgL(-1) with detection limit of 0.05mgL(-1). It indicates a dramatically promising application of bismuth oxyhalides in photoelectrochemical detection. It will be expected that the present study may be lightly extended to the monitor of other organic pollutants by photoelectrochemical detection of the Au/BiOCl composites. PMID:27260461

  11. Inhibition of gold nanoparticles (AuNPs) on pathogenic biofilm formation and invasion to host cells.

    Science.gov (United States)

    Yu, Qilin; Li, Jianrong; Zhang, Yueqi; Wang, Yufan; Liu, Lu; Li, Mingchun

    2016-01-01

    Owing to the growing infectious diseases caused by eukaryotic and prokaryotic pathogens, it is urgent to develop novel antimicrobial agents against clinical pathogenic infections. Biofilm formation and invasion into the host cells are vital processes during pathogenic colonization and infection. In this study, we tested the inhibitory effect of Au nanoparticles (AuNPs) on pathogenic growth, biofilm formation and invasion. Interestingly, although the synthesized AuNPs had no significant toxicity to the tested pathogens, Candida albicans and Pseudomonas aeruginosa, the nanoparticles strongly inhibited pathogenic biofilm formation and invasion to dental pulp stem cells (DPSCs). Further investigations revealed that AuNPs abundantly bound to the pathogen cells, which likely contributed to their inhibitory effect on biofilm formation and invasion. Moreover, treatment of AuNPs led to activation of immune response-related genes in DPSCs, which may enhance the activity of host immune system against the pathogens. Zeta potential analysis and polyethylene glycol (PEG)/polyethyleneimine (PEI) coating tests further showed that the interaction between pathogen cells and AuNPs is associated with electrostatic attractions. Our findings shed novel light on the application of nanomaterials in fighting against clinical pathogens, and imply that the traditional growth inhibition test is not the only way to evaluate the drug effect during the screening of antimicrobial agents. PMID:27220400

  12. Evidence for Bioavailability of Au Nanoparticles from Soil and Biodistribution within Earthworms (Eisenia fetida)

    Energy Technology Data Exchange (ETDEWEB)

    J Unrine; S Hunyadi; O Tsyusko; W Rao; A Shoults-Wilson; P Bertsch

    2011-12-31

    Because Au nanoparticles (NPs) are resistant to oxidative dissolution and are easily detected, they have been used as stable probes for the behavior of nanomaterials within biological systems. Previous studies provide somewhat limited evidence for bioavailability of Au NPs in food webs, because the spatial distribution within tissues and the speciation of Au was not determined. In this study, we provide multiple lines of evidence, including orthogonal microspectroscopic techniques, as well as evidence from biological responses, that Au NPs are bioavailable from soil to a model detritivore (Eisenia fetida). We also present limited evidence that Au NPs may cause adverse effects on earthworm reproduction. This is perhaps the first study to demonstrate that Au NPs can be taken up by detritivores from soil and distributed among tissues. We found that primary particle size (20 or 55 nm) did not consistently influence accumulated concentrations on a mass concentration basis; however, on a particle number basis the 20 nm particles were more bioavailable. Differences in bioavailability between the treatments may have been explained by aggregation behavior in pore water. The results suggest that nanoparticles present in soil from activities such as biosolids application have the potential to enter terrestrial food webs.

  13. Synthesis and optical properties of Au decorated colloidal tungsten oxide nanoparticles

    Science.gov (United States)

    Tahmasebi, Nemat; Mahdavi, Seyed Mohammad

    2015-11-01

    In this study, colloidal tungsten oxide nanoparticles were fabricated by pulsed laser ablation of tungsten target using the first harmonic of a Nd:YAG laser (1064 nm) in deionized water. After ablation, a 0.33 g/lit HAuCl4 aqueous solution was added into as-prepared colloidal nanoparticles. In this process, Au3+ ions were reduced to decorate gold metallic state (Au0) onto colloidal tungsten oxide nanoparticles surface. The morphology and chemical composition of the synthesized nanoparticles were studied by AFM, XRD, TEM and XPS techniques. UV-Vis analysis reveals a distinct absorption peak at ∼530 nm. This peak can be attributed to the surface plasmon resonance (SPR) of Au and confirms formation of gold state. Moreover, X-ray photoelectron spectroscopy reveals that Au ions' reduction happens after adding HAuCl4 solution into as-prepared colloidal tungsten oxide nanoparticles. Transmission electron microscope shows that an Au shell has been decorated onto colloidal WO3 nanoparticles. Noble metal decorated tungsten oxide nanostructure could be an excellent candidate for photocatalysis, gas sensing and gasochromic applications. Finally, the gasochromic behavior of the synthesized samples was investigated by H2 and O2 gases bubbling into the produced colloidal Au/WO3 nanoparticles. Synthesized colloidal nanoparticles show excellent coloration contrast (∼80%) through NIR spectra.

  14. Inhibition of gold nanoparticles (AuNPs) on pathogenic biofilm formation and invasion to host cells

    Science.gov (United States)

    Yu, Qilin; Li, Jianrong; Zhang, Yueqi; Wang, Yufan; Liu, Lu; Li, Mingchun

    2016-01-01

    Owing to the growing infectious diseases caused by eukaryotic and prokaryotic pathogens, it is urgent to develop novel antimicrobial agents against clinical pathogenic infections. Biofilm formation and invasion into the host cells are vital processes during pathogenic colonization and infection. In this study, we tested the inhibitory effect of Au nanoparticles (AuNPs) on pathogenic growth, biofilm formation and invasion. Interestingly, although the synthesized AuNPs had no significant toxicity to the tested pathogens, Candida albicans and Pseudomonas aeruginosa, the nanoparticles strongly inhibited pathogenic biofilm formation and invasion to dental pulp stem cells (DPSCs). Further investigations revealed that AuNPs abundantly bound to the pathogen cells, which likely contributed to their inhibitory effect on biofilm formation and invasion. Moreover, treatment of AuNPs led to activation of immune response-related genes in DPSCs, which may enhance the activity of host immune system against the pathogens. Zeta potential analysis and polyethylene glycol (PEG)/polyethyleneimine (PEI) coating tests further showed that the interaction between pathogen cells and AuNPs is associated with electrostatic attractions. Our findings shed novel light on the application of nanomaterials in fighting against clinical pathogens, and imply that the traditional growth inhibition test is not the only way to evaluate the drug effect during the screening of antimicrobial agents. PMID:27220400

  15. Ag@Au core-shell dendrites: a stable, reusable and sensitive surface enhanced Raman scattering substrate

    Science.gov (United States)

    Jun Yin, Hong; Yang Chen, Zhao; Mei Zhao, Yong; Yang Lv, Ming; An Shi, Chun; Long Wu, Zheng; Zhang, Xin; Liu, Luo; Li Wang, Ming; Jun Xu, Hai

    2015-09-01

    Surface enhanced Raman scattering (SERS) substrate based on fabricated Ag@Au core-shell dendrite was achieved. Ag dendrites were grown on Si wafer by the hydrothermal corrosion method and Au nanofilm on the surface of Ag dendritic nanostructure was then fabricated by chemical reduction. With the help of sodium borohydride in water, Au surface absorbates such as thiophene, adenine, rhodamine, small anions (Br- and I-), and a polymer (PVP, poly(N-vinylpyrrolidone)) can be completely and rapidly removed. After four repeatable experiments, the substrate SERS function did not decrease at all, indicating that the Ag@Au dendrite should be of great significance to SERS application because it can save much resource. Six-month-duration stability tests showed that the Ag@Au core-shell dendrite substrate is much more stable than the Ag dendrite substrates. We have also experimented on fast detection of Cd2+ at 10-8  M concentration by decorating single-stranded DNA containing adenine and guanine bases on the surface of this Ag@Au dendrite. Finite-difference time-domain simulations were carried out to investigate the influence of Au nanolayer on Ag dendrites, which showed that the local electric fields and enhancement factor are hardly affected when a 4 nm Au nanolayer is coated on Ag dendrite surface.

  16. Experimental and computational investigation of Au25 clusters and CO2: a unique interaction and enhanced electrocatalytic activity.

    Science.gov (United States)

    Kauffman, Douglas R; Alfonso, Dominic; Matranga, Christopher; Qian, Huifeng; Jin, Rongchao

    2012-06-20

    Atomically precise, inherently charged Au(25) clusters are an exciting prospect for promoting catalytically challenging reactions, and we have studied the interaction between CO(2) and Au(25). Experimental results indicate a reversible Au(25)-CO(2) interaction that produced spectroscopic and electrochemical changes similar to those seen with cluster oxidation. Density functional theory (DFT) modeling indicates these changes stem from a CO(2)-induced redistribution of charge within the cluster. Identification of this spontaneous coupling led to the application of Au(25) as a catalyst for the electrochemical reduction of CO(2) in aqueous media. Au(25) promoted the CO(2) → CO reaction within 90 mV of the formal potential (thermodynamic limit), representing an approximate 200-300 mV improvement over larger Au nanoparticles and bulk Au. Peak CO(2) conversion occurred at -1 V (vs RHE) with approximately 100% efficiency and a rate 7-700 times higher than that for larger Au catalysts and 10-100 times higher than those for current state-of-the-art processes. PMID:22616945

  17. Apprentissages techniques : L'apprentissage au CERN

    CERN Multimedia

    2004-01-01

    APPRENTISSAGES TECHNIQUES GESTION ET DEVELOPPEMENT DU PERSONNEL HR/PMD L'APPRENTISSAGE AU CERN pour les professions d'électronicien(ne) et de laborantin(e) en physique L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature : • avoir au moins 15 ans et moins de 21 ans à la date de début de l'apprentissage • avoir terminé la scolarité obligatoire, au minimum 9ème du Cycle d'orientation genevois (3ème en France) • être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgiqu...

  18. Evidence of final-state suppression of high-p{_ T} hadrons in Au + Au collisions using d + Au measurements at RHIC

    Science.gov (United States)

    Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Becker, B.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Harrington, A. S.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Khan, N.; Kulinich, P.; Kuo, C. M.; Lee, J. W.; Lin, W. T.; Manly, S.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Roland, C.; Roland, G.; Sagerer, J.; Sarin, P.; Sedykh, I.; Skulski, W.; Smith, C. E.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Veres, G. I.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wysłouch, B.; Zhang, J.

    Transverse momentum spectra of charged hadrons with pT 2 GeV/c). In contrast, the d + Au nuclear modification factor exhibits no suppression of the high-pT yields. These measurements suggest a large energy loss of the high-pT particles in the highly interacting medium created in the central Au + Au collisions. The lack of suppression in d + Au collisions suggests that it is unlikely that initial state effects can explain the suppression in the central Au + Au collisions. PACS: 25.75.-q

  19. Clinical evaluation of short-life radioactive source Au-198 grain

    International Nuclear Information System (INIS)

    Au-198 grain has been used as a new source in brachytherapy instead of Rn-seed since September 1975 in Japan. A total of 60 cases with malignant tumors of the oral cavity treated with Au-198 grain during the period of September 1975 to November 1978 were analyzed. Nineteen cases were treated with Au-198 grain alone, twenty-nine were with combined external beam therapy and the other twelve were treated as a boost implant for Radium needles or as a recurrent disease. Two-year local recurrence free rates were 78% (7/9) by Au-198 grain alone and 67% (10/15) by Au-198 grain combined with external beam therapy. The frequency of local necrosis following the combined therapy was inevitably higher than Au-198 grain alone. However, these results were somewhat better than the results obtained from treatment of tongue cancer using Rn seed with or without external beam which reported previously. An analysis was also made of the local condition of the treated area applying with the TDF values. A suitable permanent implant dose of Au-198 grain might be slightly lower than Rn seed considering from the TDF value analysis. The Au-198 grain technique seemed to be an excellent choice of treatment as far as the lesion was small or superficial enough, or the lesion was locating in the sites anatomically to be not able to apply Radium needles. The technique has also an advantage to be applicable without severe discomfort to the patient and less exposure to the operator compared to the Radium needle technique. (author)

  20. Systematic measurements of identified particle spectra in pp, d+Au, and Au+Au collisions at the STAR detector

    Science.gov (United States)

    Abelev, B. I.; Aggarwal, M. M.; Ahammed, Z.; Anderson, B. D.; Arkhipkin, D.; Averichev, G. S.; Bai, Y.; Balewski, J.; Barannikova, O.; Barnby, L. S.; Baudot, J.; Baumgart, S.; Beavis, D. R.; Bellwied, R.; Benedosso, F.; Betts, R. R.; Bhardwaj, S.; Bhasin, A.; Bhati, A. K.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Biritz, B.; Bland, L. C.; Bombara, M.; Bonner, B. E.; Botje, M.; Bouchet, J.; Braidot, E.; Brandin, A. V.; Bruna, E.; Bueltmann, S.; Burton, T. P.; Bystersky, M.; Cai, X. Z.; Caines, H.; Sánchez, M. Calderón De La Barca; Callner, J.; Catu, O.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chajecki, Z.; Chaloupka, P.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, J. Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Choi, K. E.; Christie, W.; Chung, S. U.; Clarke, R. F.; Codrington, M. J. M.; Coffin, J. P.; Cormier, T. M.; Cosentino, M. R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Daugherity, M.; Silva, C. De; Dedovich, T. G.; Dephillips, M.; Derevschikov, A. A.; de Souza, R. Derradi; Didenko, L.; Djawotho, P.; Dogra, S. M.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, F.; Dunlop, J. C.; Mazumdar, M. R. Dutta; Edwards, W. R.; Efimov, L. G.; Elhalhuli, E.; Elnimr, M.; Emelianov, V.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Eun, L.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Feng, A.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Gagliardi, C. A.; Gaillard, L.; Gangadharan, D. R.; Ganti, M. S.; Garcia-Solis, E.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y. N.; Gordon, A.; Grebenyuk, O.; Grosnick, D.; Grube, B.; Guertin, S. M.; Guimaraes, K. S. F. F.; Gupta, A.; Gupta, N.; Guryn, W.; Haag, B.; Hallman, T. J.; Hamed, A.; Harris, J. W.; He, W.; Heinz, M.; Heppelmann, S.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffman, A. M.; Hoffmann, G. W.; Hofman, D. J.; Hollis, R. S.; Huang, H. Z.; Humanic, T. J.; Igo, G.; Iordanova, A.; Jacobs, P.; Jacobs, W. W.; Jakl, P.; Jin, F.; Jones, P. G.; Joseph, J.; Judd, E. G.; Kabana, S.; Kajimoto, K.; Kang, K.; Kapitan, J.; Kaplan, M.; Keane, D.; Kechechyan, A.; Kettler, D.; Khodyrev, V. Yu.; Kiryluk, J.; Kisiel, A.; Klein, S. R.; Knospe, A. G.; Kocoloski, A.; Koetke, D. D.; Kopytine, M.; Kotchenda, L.; Kouchpil, V.; Kravtsov, P.; Kravtsov, V. I.; Krueger, K.; Krus, M.; Kuhn, C.; Kumar, L.; Kurnadi, P.; Lamont, M. A. C.; Landgraf, J. M.; Lapointe, S.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, C.-H.; Levine, M. J.; Li, C.; Li, Y.; Lin, G.; Lin, X.; Lindenbaum, S. J.; Lisa, M. A.; Liu, F.; Liu, H.; Liu, J.; Liu, L.; Ljubicic, T.; Llope, W. J.; Longacre, R. S.; Love, W. A.; Lu, Y.; Ludlam, T.; Lynn, D.; Ma, G. L.; Ma, Y. G.; Mahapatra, D. P.; Majka, R.; Mall, O. I.; Mangotra, L. K.; Manweiler, R.; Margetis, S.; Markert, C.; Matis, H. S.; Matulenko, Yu. A.; McShane, T. S.; Meschanin, A.; Millane, J.; Miller, M. L.; Minaev, N. G.; Mioduszewski, S.; Mischke, A.; Mitchell, J.; Mohanty, B.; Molnar, L.; Morozov, D. A.; Munhoz, M. G.; Nandi, B. K.; Nattrass, C.; Nayak, T. K.; Nelson, J. M.; Nepali, C.; Netrakanti, P. K.; Ng, M. J.; Nogach, L. V.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Okada, H.; Okorokov, V.; Olson, D.; Pachr, M.; Page, B. S.; Pal, S. K.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S. C.; Planinic, M.; Pluta, J.; Poljak, N.; Poskanzer, A. M.; Potukuchi, B. V. K. S.; Prindle, D.; Pruneau, C.; Pruthi, N. K.; Putschke, J.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Reed, R.; Ridiger, A.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Rose, A.; Roy, C.; Ruan, L.; Russcher, M. J.; Rykov, V.; Sahoo, R.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sarsour, M.; Schambach, J.; Scharenberg, R. P.; Schmitz, N.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shabetai, A.; Shahaliev, E.; Shao, M.; Sharma, M.; Shi, S. S.; Shi, X.-H.; Sichtermann, E. P.; Simon, F.; Singaraju, R. N.; Skoby, M. J.; Smirnov, N.; Snellings, R.; Sorensen, P.; Sowinski, J.; Spinka, H. M.; Srivastava, B.; Stadnik, A.; Stanislaus, T. D. S.; Staszak, D.; Strikhanov, M.; Stringfellow, B.; Suaide, A. A. P.; Suarez, M. C.; Subba, N. L.; Sumbera, M.; Sun, X. M.; Sun, Y.; Sun, Z.; Surrow, B.; Symons, T. J. M.; de Toledo, A. Szanto; Takahashi, J.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Thein, D.; Thomas, J. H.; Tian, J.; Timmins, A. R.; Timoshenko, S.; Tlusty, D.; Tokarev, M.; Tram, V. N.; Trattner, A. L.; Trentalange, S.; Tribble, R. E.; Tsai, O. D.; Ulery, J.; Ullrich, T.; Underwood, D. G.; Buren, G. Van; van Leeuwen, M.; Molen, A. M. Vander; Vanfossen, J. A., Jr.; Varma, R.; Vasconcelos, G. M. S.; Vasilevski, I. M.; Vasiliev, A. N.; Videbaek, F.; Vigdor, S. E.; Viyogi, Y. P.; Vokal, S.; Voloshin, S. A.; Wada, M.; Waggoner, W. T.; Wang, F.; Wang, G.; Wang, J. S.; Wang, Q.; Wang, X.; Wang, X. L.; Wang, Y.; Webb, J. C.; Westfall, G. D.; Whitten, C., Jr.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y.; Xu, N.; Xu, Q. H.; Xu, Y.; Xu, Z.; Yepes, P.; Yoo, I.-K.; Yue, Q.; Zawisza, M.; Zbroszczyk, H.; Zhan, W.; Zhang, H.; Zhang, S.; Zhang, W. M.; Zhang, Y.; Zhang, Z. P.; Zhao, Y.; Zhong, C.; Zhou, J.; Zoulkarneev, R.; Zoulkarneeva, Y.; Zuo, J. X.

    2009-03-01

    Identified charged-particle spectra of π±, K±, p, and pmacr at midrapidity (|y|<0.1) measured by the dE/dx method in the STAR (solenoidal tracker at the BNL Relativistic Heavy Ion Collider) time projection chamber are reported for pp and d+Au collisions at sNN=200 GeV and for Au+Au collisions at 62.4, 130, and 200 GeV. Average transverse momenta, total particle production, particle yield ratios, strangeness, and baryon production rates are investigated as a function of the collision system and centrality. The transverse momentum spectra are found to be flatter for heavy particles than for light particles in all collision systems; the effect is more prominent for more central collisions. The extracted average transverse momentum of each particle species follows a trend determined by the total charged-particle multiplicity density. The Bjorken energy density estimate is at least several GeV/fm3 for a formation time less than 1 fm/c. A significantly larger net-baryon density and a stronger increase of the net-baryon density with centrality are found in Au+Au collisions at 62.4 GeV than at the two higher energies. Antibaryon production relative to total particle multiplicity is found to be constant over centrality, but increases with the collision energy. Strangeness production relative to total particle multiplicity is similar at the three measured RHIC energies. Relative strangeness production increases quickly with centrality in peripheral Au+Au collisions, to a value about 50% above the pp value, and remains rather constant in more central collisions. Bulk freeze-out properties are extracted from thermal equilibrium model and hydrodynamics-motivated blast-wave model fits to the data. Resonance decays are found to have little effect on the extracted kinetic freeze-out parameters because of the transverse momentum range of our measurements. The extracted chemical freeze-out temperature is constant, independent of collision system or centrality; its value is close

  1. Au-Pt alloy nanocrystals incorporated in silica films

    OpenAIRE

    Goutam De; Rao, CNR

    2005-01-01

    Au, Pt and Au-Pt alloy nanocrystals have been prepared in thin SiO2 film matrices by sol-gel spin-coating, followed by heating at 450 uC in 10% $H_{2}$-90% Ar. X-Ray diffraction patterns reveal that the Au and Au-Pt nanocrystals have a preferential (111) orientation. Upon increasing the Pt concentration, part of the Pt does not alloy with Au, but instead forms a shell around the Au-Pt alloy core. The alloy composition itself goes up to Au(50) : Pt(50), and the Pt shells are formed around the ...

  2. Measurement of yields for the {sup 197}Au(γ,xn){sup 197-x}Au reactions induced by 2.5 GeV Bremsstrahlung

    Energy Technology Data Exchange (ETDEWEB)

    Hien, Nguyen Thi; Kim, Guinyun; Kim, Kwangsoo; Shahid, Muhammad; Zaman, Muhammah; Nadeem, Muhammad [Kyungpook National University, Daegu (Korea, Republic of); Khue, Pham Duc; Thanh, Kim Tien; Do, Nguyen Van [Vietnam Academy of Science and Technology, Hanoi (Viet Nam)

    2015-05-15

    Studies of high-energy nuclear reactions are of great important. It may help in deeper understanding of the reaction mechanisms and in extending of various fields of applications such as astrophysics, radiation physics, intense neutron source production and nuclear waste transmutation. The aim of the present work is to investigate the multineutron photonuclear on {sup 197}Au bombarded by 2.5 GeV Bremsstrahlung. Most of the photodisintegration products of gold with half-lives sufficient for the activity measurement. In this work, the necessary corrections were made in order to improve the accuracy of the experimental results The obtained experimental results are in good agreement with the calculated values. The yields for the {sup 197}Au(γ,xn){sup 197}-xAu reactions depend not only on the excitation energies but also on the number of neutrons ejected.

  3. Rencontre Laboratoires d'Essai au Feu - Belac

    OpenAIRE

    Dumont, Fabien

    2011-01-01

    Résistance au feu : 1. Généralités (but, performances, évaluation des performances, résultats d'essai, méthodes d'essai), 2. Contexte réglementaire et normatif (marquage CE, directive des produits de construction, spécifications techniques, laboratoires notifiés et accrédités, classement, domaines d'application directe et étendue), 3. Expression des résultats (rapports d'essai et de classement, scope d'accréditation)

  4. XAFS studies of Au nanocrystals passivated by different surfactants

    International Nuclear Information System (INIS)

    The electronic and atomic structures of Au nanocrystals affected by different surfactants (PPh3, PVP, and dodecanethiol) capping were studied by X-ray absorption fine structure (XAFS) at Au L3-edge. For PPh3, PVP, and dodecanethiol-capped Au nanocrystals, the surface Au atoms interact with P, O, and S atoms respectively; however, only for dodecanethiol-capped Au nanocrystals, a significant electron transfer between Au and S atoms is observed. The extend-XAFS results reveal that the atomic structure disorder of Au-Au shell gradually increases from 0.0095 to 0.0152 Å2 when the surfactants goes from PPh3 to dodecanethiol. These results suggest that the surfactants would change the electronic and atomic structures of Au nanocrystals rather than merely passivates on the surface of Au nanocrystals.

  5. Gold nanoparticles production using reactor and cyclotron based methods in assessment of (196,198)Au production yields by (197)Au neutron absorption for therapeutic purposes.

    Science.gov (United States)

    Khorshidi, Abdollah

    2016-11-01

    Medical nano-gold radioisotopes is produced regularly using high-flux nuclear reactors, and an accelerator-driven neutron activator can turn out higher yield of (197)Au(n,γ)(196,198)Au reactions. Here, nano-gold production via radiative/neutron capture was investigated using irradiated Tehran Research Reactor flux and also simulated proton beam of Karaj cyclotron in Iran. (197)Au nano-solution, including 20nm shaped spherical gold and water, was irradiated under Tehran reactor flux at 2.5E+13n/cm(2)/s for (196,198)Au activity and production yield estimations. Meanwhile, the yield was examined using 30MeV proton beam of Karaj cyclotron via simulated new neutron activator containing beryllium target, bismuth moderator around the target, and also PbF2 reflector enclosed the moderator region. Transmutation in (197)Au nano-solution samples were explored at 15 and 25cm distances from the target. The neutron flux behavior inside the water and bismuth moderators was investigated for nano-gold particles transmutation. The transport of fast neutrons inside bismuth material as heavy nuclei with a lesser lethargy can be contributed in enhanced nano-gold transmutation with long duration time than the water moderator in reactor-based method. Cyclotron-driven production of βeta-emitting radioisotopes for brachytherapy applications can complete the nano-gold production technology as a safer approach as compared to the reactor-based method. PMID:27524041

  6. Modélisation et Commande de la Puissance d’un Système Hydrolien avec Stockage d’Energie

    OpenAIRE

    Zhou, Zhibin

    2014-01-01

    This PhD thesis models the whole power chain of a marine current turbine (MCT) system and investigates the use of energy storage devices to improve power quality and energy management capability. First, various energy storage technologies concerning their applications to address the power fluctuation phenomena in tidal current generation system are reviewed and compared. Then, a two-stage power smoothing control strategy for compensating swell-induced short-time fluctuations is proposed. The ...

  7. High hardness in the biocompatible intermetallic compound β-Ti3Au.

    Science.gov (United States)

    Svanidze, Eteri; Besara, Tiglet; Ozaydin, M Fevsi; Tiwary, Chandra Sekhar; Wang, Jiakui K; Radhakrishnan, Sruthi; Mani, Sendurai; Xin, Yan; Han, Ke; Liang, Hong; Siegrist, Theo; Ajayan, Pulickel M; Morosan, E

    2016-07-01

    The search for new hard materials is often challenging, but strongly motivated by the vast application potential such materials hold. Ti3Au exhibits high hardness values (about four times those of pure Ti and most steel alloys), reduced coefficient of friction and wear rates, and biocompatibility, all of which are optimal traits for orthopedic, dental, and prosthetic applications. In addition, the ability of this compound to adhere to ceramic parts can reduce both the weight and the cost of medical components. The fourfold increase in the hardness of Ti3Au compared to other Ti-Au alloys and compounds can be attributed to the elevated valence electron density, the reduced bond length, and the pseudogap formation. Understanding the origin of hardness in this intermetallic compound provides an avenue toward designing superior biocompatible, hard materials. PMID:27453942

  8. High hardness in the biocompatible intermetallic compound β-Ti3Au

    Science.gov (United States)

    Svanidze, Eteri; Besara, Tiglet; Ozaydin, M. Fevsi; Tiwary, Chandra Sekhar; Wang, Jiakui K.; Radhakrishnan, Sruthi; Mani, Sendurai; Xin, Yan; Han, Ke; Liang, Hong; Siegrist, Theo; Ajayan, Pulickel M.; Morosan, E.

    2016-01-01

    The search for new hard materials is often challenging, but strongly motivated by the vast application potential such materials hold. Ti3Au exhibits high hardness values (about four times those of pure Ti and most steel alloys), reduced coefficient of friction and wear rates, and biocompatibility, all of which are optimal traits for orthopedic, dental, and prosthetic applications. In addition, the ability of this compound to adhere to ceramic parts can reduce both the weight and the cost of medical components. The fourfold increase in the hardness of Ti3Au compared to other Ti–Au alloys and compounds can be attributed to the elevated valence electron density, the reduced bond length, and the pseudogap formation. Understanding the origin of hardness in this intermetallic compound provides an avenue toward designing superior biocompatible, hard materials.

  9. Enhancement of the thermal transport in a culture medium with Au nanoparticles

    Science.gov (United States)

    Jiménez-Pérez, J. L.; Fuentes, R. Gutierrez; Alvarado, E. Maldonado; Ramón-Gallegos, E.; Cruz-Orea, A.; Tánori-Cordova, J.; Mendoza-Alvarez, J. G.

    2008-11-01

    In this work, it is reported the gold nanoparticles synthesis, their characterization, and their application to the enhancement of the thermal transport in a cellular culture medium. The Au nanoparticles (NPs), with average size of 10 nm, contained into a culture medium (DMEM (1)/F12(1)) (CM) increased considerably the heat transfer in the medium. Thermal lens spectrometry (TLS) was used to measure the thermal diffusivity of the nanofluids. The characteristic time constant of the transient thermal lens was obtained by fitting the theoretical expression, for transient thermal lens, to the experimental data. Our results show that the thermal diffusivity of the culture medium is highly sensitive to the Au nanoparticle concentration and size. The ability to modify the thermal properties to nanometer scale becomes very important in medical applications as in the case of cancer treatment by using photodynamic therapy (PDT). A complementary study with UV-vis and TEM techniques was performed to characterize the Au nanoparticles.

  10. Suppression of ϒ production in d+Au and Au+Au collisions at √(sNN)=200 GeV

    International Nuclear Information System (INIS)

    We report measurements of ϒ meson production in p+p, d+Au, and Au+Au collisions using the STAR detector at RHIC. We compare the ϒ yield to the measured cross section in p+p collisions in order to quantify any modifications of the yield in cold nuclear matter using d+Au data and in hot nuclear matter using Au+Au data separated into three centrality classes. Our p+p measurement is based on three times the statistics of our previous result. We obtain a nuclear modification factor for ϒ(1S+2S+3S) in the rapidity range |y|<1 in d+Au collisions of RdAu=0.79±0.24(stat.)±0.03(syst.)±0.10(p+p syst.). A comparison with models including shadowing and initial state parton energy loss indicates the presence of additional cold-nuclear matter suppression. Similarly, in the top 10% most-central Au+Au collisions, we measure a nuclear modification factor of RAA=0.49±0.1(stat.)±0.02(syst.)±0.06(p+psyst.), which is a larger suppression factor than that seen in cold nuclear matter. Our results are consistent with complete suppression of excited-state ϒ mesons in Au+Au collisions. The additional suppression in Au+Au is consistent with the level expected in model calculations that include the presence of a hot, deconfined Quark–Gluon Plasma. However, understanding the suppression seen in d+Au is still needed before any definitive statements about the nature of the suppression in Au+Au can be made

  11. Thermodynamic Measurements on Alloys and Compounds in Ag-Au-Se and Ag-Pd systems by the Electromotive Force Method

    OpenAIRE

    Feng, Dawei

    2014-01-01

    Gold and silver chalcogenides are significant minerals and major carriers of precious metals, and silver palladium alloy is one of the most important silver alloys with various industrial applications. The Ag-Au-Se ternary system and the Ag-Pd binary system have been investigated by the electromotive force (EMF) method in this study. For the Ag-Au-Se ternary system, the numerical values of the standard thermodynamic functions of the compounds Ag2Se (naumannite), AuSe, and Ag3AuSe2 (fisches...

  12. Transparent, conductive, and SERS-active Au nanofiber films assembled on an amphiphilic peptide template

    Science.gov (United States)

    Vinod, T. P.; Zarzhitsky, Shlomo; Morag, Ahiud; Zeiri, Leila; Levi-Kalisman, Yael; Rapaport, Hanna; Jelinek, Raz

    2013-10-01

    The use of biological materials as templates for functional molecular assemblies is an active research field at the interface between chemistry, biology, and materials science. We demonstrate the formation of gold nanofiber films on β-sheet peptide domains assembled at the air/water interface. The gold deposition scheme employed a recently discovered chemical process involving spontaneous crystallization and reduction of water-soluble Au(SCN)41- upon anchoring to surface-displayed amine moieties. Here we show that an interlinked network of crystalline Au nanofibers is readily formed upon incubation of the Au(iii) thiocyanate complex with the peptide monolayers. Intriguingly, the resultant films were optically transparent, enabled electrical conductivity, and displayed pronounced surface enhanced Raman spectroscopy (SERS) activity, making the approach a promising avenue for construction of nano-structured films exhibiting practical applications.The use of biological materials as templates for functional molecular assemblies is an active research field at the interface between chemistry, biology, and materials science. We demonstrate the formation of gold nanofiber films on β-sheet peptide domains assembled at the air/water interface. The gold deposition scheme employed a recently discovered chemical process involving spontaneous crystallization and reduction of water-soluble Au(SCN)41- upon anchoring to surface-displayed amine moieties. Here we show that an interlinked network of crystalline Au nanofibers is readily formed upon incubation of the Au(iii) thiocyanate complex with the peptide monolayers. Intriguingly, the resultant films were optically transparent, enabled electrical conductivity, and displayed pronounced surface enhanced Raman spectroscopy (SERS) activity, making the approach a promising avenue for construction of nano-structured films exhibiting practical applications. Electronic supplementary information (ESI) available: AFM analysis of the

  13. Supramolecular functionalization and concomitant enhancement in properties of Au(25) clusters.

    Science.gov (United States)

    Mathew, Ammu; Natarajan, Ganapati; Lehtovaara, Lauri; Häkkinen, Hannu; Kumar, Ravva Mahesh; Subramanian, Venkatesan; Jaleel, Abdul; Pradeep, Thalappil

    2014-01-28

    We present a versatile approach for tuning the surface functionality of an atomically precise 25 atom gold cluster using specific host-guest interactions between β-cyclodextrin (CD) and the ligand anchored on the cluster. The supramolecular interaction between the Au25 cluster protected by 4-(t-butyl)benzyl mercaptan, labeled Au25SBB18, and CD yielding Au25SBB18∩CDn (n = 1, 2, 3, and 4) has been probed experimentally using various spectroscopic techniques and was further analyzed by density functional theory calculations and molecular modeling. The viability of our method in modifying the properties of differently functionalized Au25 clusters is demonstrated. Besides modifying their optoelectronic properties, the CD moieties present on the cluster surface provide enhanced stability and optical responses which are crucial in view of the potential applications of these systems. Here, the CD molecules act as an umbrella which protects the fragile cluster core from the direct interaction with many destabilizing agents such as metal ions, ligands, and so on. Apart from the inherent biocompatibility of the CD-protected Au clusters, additional capabilities acquired by the supramolecular functionalization make such modified clusters preferred materials for applications, including those in biology. PMID:24313537

  14. Charged particle density distributions in Au + Au collisions at relativistic heavy-ion collider energies

    Indian Academy of Sciences (India)

    Fauad Rami

    2003-05-01

    Charged particle pseudorapidity distributions have been measured in Au + Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of the collision centrality and the center of mass energy. They are compared to the predictions of different parton scattering models and the important role of hard scattering processes at RHIC energies is discussed.

  15. Using supported Au nanoparticles as starting material for preparing uniform Au/Pd bimetallic catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Villa, Alberto [Universita di Milano, Italy; Prati, Laura [Universita di Milano, Italy; Su, Dangshen [Fritz Haber Institute of the Max Planck Society, Berlin, Germany; Wang, Di [Fritz Haber Institute of the Max Planck Society, Berlin, Germany; Veith, Gabriel M [ORNL

    2010-01-01

    One of the best methods for producing bulk homogeneous (composition) supported bimetallic AuPd clusters involves the immobilization of a protected Au seed followed by the addition of Pd. This paper investigates the importance of this gold seed in controlling the resulting bimetallic AuPd clusters structures, sizes and catalytic activities by investigating three different gold seeds. Uniform Au-Pd alloy were obtained when a steric/electrostatic protecting group, poly(vinyl alcohol) (PVA), was used to form the gold clusters on activated carbon (AC). In contrast Au/AC precursors prepared using Au nanoparticles with only electrostatic stabilization (tetrakis(hydroxypropyl)phosphonium chloride (THPC)), or no stabilization (magnetron sputtering) produced inhomogeneous alloys and segregation of the gold and palladium. The uniform alloyed catalyst (Pd{at}Au{sub PVA}/AC) is the most active and selective catalyst, while the inhomogenous catalysts are less active and selective. Further study of the PVA protected Au clusters revealed that the amount of PVA used is also critical for the preparation of uniform alloyed catalyst, their stability, and their catalytic activity.

  16. Electrochemical Characterization of Protein Adsorption onto YNGRT-Au and VLGXE-Au Surfaces

    Directory of Open Access Journals (Sweden)

    Hanna Trzeciakiewicz

    2015-08-01

    Full Text Available The adsorption of the proteins CD13, mucin and bovine serum albumin on VLGXE-Au and YNGRT-Au interfaces was monitored by electrochemical impedance spectroscopy in the presence of [Fe(CN6]3−/4−. The hydrophobicity of the Au surface was tailored using specific peptides, blocking agents and diluents. The combination of blocking agents (ethanolamine or n-butylamine and diluents (hexanethiol or 2-mercaptoethanol was used to prepare various peptide-modified Au surfaces. Protein adsorption onto the peptide-Au surfaces modified with the combination of n-butylamine and hexanethiol produced a dramatic decrease in the charge transfer resistance, Rct, for all three proteins. In contrast, polar peptide-surfaces induced a minimal change in Rct for all three proteins. Furthermore, an increase in Rct was observed with CD13 (an aminopeptidase overexpressed in certain cancers in comparison to the other proteins when the VLGXE-Au surface was modified with n-butylamine as a blocking agent. The electrochemical data indicated that protein adsorption may be modulated by tailoring the peptide sequence on Au surfaces and that blocking agents and diluents play a key role in promoting or preventing protein adsorption. The peptide-Au platform may also be used for targeting cancer biomarkers with designer peptides.

  17. Electrochemical Characterization of Protein Adsorption onto YNGRT-Au and VLGXE-Au Surfaces.

    Science.gov (United States)

    Trzeciakiewicz, Hanna; Esteves-Villanueva, Jose; Soudy, Rania; Kaur, Kamaljit; Martic-Milne, Sanela

    2015-01-01

    The adsorption of the proteins CD13, mucin and bovine serum albumin on VLGXE-Au and YNGRT-Au interfaces was monitored by electrochemical impedance spectroscopy in the presence of [Fe(CN)6](3-/4-). The hydrophobicity of the Au surface was tailored using specific peptides, blocking agents and diluents. The combination of blocking agents (ethanolamine or n-butylamine) and diluents (hexanethiol or 2-mercaptoethanol) was used to prepare various peptide-modified Au surfaces. Protein adsorption onto the peptide-Au surfaces modified with the combination of n-butylamine and hexanethiol produced a dramatic decrease in the charge transfer resistance, Rct, for all three proteins. In contrast, polar peptide-surfaces induced a minimal change in Rct for all three proteins. Furthermore, an increase in Rct was observed with CD13 (an aminopeptidase overexpressed in certain cancers) in comparison to the other proteins when the VLGXE-Au surface was modified with n-butylamine as a blocking agent. The electrochemical data indicated that protein adsorption may be modulated by tailoring the peptide sequence on Au surfaces and that blocking agents and diluents play a key role in promoting or preventing protein adsorption. The peptide-Au platform may also be used for targeting cancer biomarkers with designer peptides. PMID:26262621

  18. Au+Au reactions at the AGS: Experiments E866 and E917

    Energy Technology Data Exchange (ETDEWEB)

    Ogilvie, C.A.; Ahle, L. [Massachusetts Inst. of Tech., Cambridge, MA (United States). Dept. of Physics; Akiba, Y. [KEK, Tanashi (Japan)] [and others; E866 Collaboration; E917 Collaboration

    1997-12-01

    Particle production and correlation functions from Au+Au reactions have been measured as a function of both beam energy (2--10.7 AGeV) and impact parameter. These results are used to probe the dynamics of heavy-ion reactions, confront hadronic models over a wide range of conditions and to search for the onset of new phenomena.

  19. Study of Au+Au relativistic collisions with the Fopi-Phase I detector

    International Nuclear Information System (INIS)

    Au+Au relativistic collisions, in a 100-1000 MeV energy domain per nucleon, are described. Experiments have been carried out with the SIS accelerator at GSI/Darmstadt. Data are analysed with the FOPI-phase I detector. These data are compared with IQMD model (Isospin Quantum Molecular Dynamics) Predictions. (S.G). 80 refs., 77 figs., 5 tabs

  20. Λ production in AuAu collisions at 11.6 GeV/c

    International Nuclear Information System (INIS)

    I present the first measurement at AGS energies of the rapidity and transverse mass distributions for A production with Au beam on Au target. The measurements cover the rapidity region of 2.0 to 3.2 and transverse momenta of 0.0 to 1.4 GeV/c. The results are compared with the predictions of two models

  1. Identified particles in Au+Au collisions at S=200 GeV

    Science.gov (United States)

    Phobos Collaboration; Wosiek, Barbara; Back, B. B.; Baker, M. D.; Barton, D. S.; Betts, R. R.; Ballintijn, M.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Manly, S.; McLeod, D.; Michałowski, J.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steadman, S. G.; Steinberg, P.; Stephans, G. S. F.; Stodulski, M.; Sukhanov, A.; Tang, J.-L.; Teng, R.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wadsworth, B.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    2003-03-01

    The yields of identified particles have been measured at RHIC for Au+Au collisions at S=200 GeV using the PHOBOS spectrometer. The ratios of antiparticle to particle yields near mid-rapidity are presented. The first measurements of the invariant yields of charged pions, kaons and protons at very low transverse momenta are also shown.

  2. Strangelet search in Au+Au collisions at VsNN=200 GeV

    NARCIS (Netherlands)

    Bai, Y.; Benedosso, F.; Botje, M.A.J.; Grebenyuk, O.; Mischke, A.; Peitzmann, T.; Russcher, M.J.; Snellings, R.J.M.; van der Kolk, N.

    2007-01-01

    We have searched for strangelets in a triggered sample of 61 million central (top 4%) Au+Au collisions at √sNN=200 GeV near beam rapidities at the STAR solenoidal tracker detector at the BNL Relativistic Heavy Ion Collider. We have sensitivity to metastable strangelets with lifetimes of order ⩾0.1 n

  3. Multifunctional pDNA-Conjugated Polycationic Au Nanorod-Coated Fe3 O4 Hierarchical Nanocomposites for Trimodal Imaging and Combined Photothermal/Gene Therapy.

    Science.gov (United States)

    Hu, Yang; Zhou, Yiqiang; Zhao, Nana; Liu, Fusheng; Xu, Fu-Jian

    2016-05-01

    It is very desirable to design multifunctional nanocomposites for theranostic applications via flexible strategies. The synthesis of one new multifunctional polycationic Au nanorod (NR)-coated Fe3 O4 nanosphere (NS) hierarchical nanocomposite (Au@pDM/Fe3 O4 ) based on the ternary assemblies of negatively charged Fe3 O4 cores (Fe3 O4 -PDA), polycation-modified Au nanorods (Au NR-pDM), and polycations is proposed. For such nanocomposites, the combined near-infrared absorbance properties of Fe3 O4 -PDA and Au NR-pDM are applied to photoacoustic imaging and photothermal therapy. Besides, Fe3 O4 and Au NR components allow the nanocomposites to serve as MRI and CT contrast agents. The prepared positively charged Au@pDM/Fe3 O4 also can complex plasmid DNA into pDNA/Au@pDM/Fe3 O4 and efficiently mediated gene therapy. The multifunctional applications of pDNA/Au@pDM/Fe3 O4 nanocomposites in trimodal imaging and combined photothermal/gene therapy are demonstrated using a xenografted rat glioma nude mouse model. The present study demonstrates that the proper assembly of different inorganic nanoparticles and polycations is an effective strategy to construct new multifunctional theranostic systems. PMID:26996155

  4. Atomic force microscopy study of the growth mechanisms of nanostructured sputtered Au film on Si(111): Evolution with film thickness and annealing time

    International Nuclear Information System (INIS)

    Nanostructured Au films were deposited on Si(111) by room-temperature sputtering. By the atomic force microscopy technique we studied the evolution of the Au film morphology as a function of the film thickness h and annealing time t at 873 K. By the study of the evolution of the mean vertical and horizontal sizes of the islands forming the film and of their fraction of covered area as a function of h from 1.7x1017 to 1.0x1018 Au/cm2 we identified four different growth stages such as: (1) 1.7x1017≤h≤3.0x1017 Au/cm2, nucleation of nanometric three-dimensional (3D) hemispherical Au clusters; (2) 3.0x101717 Au/cm2, lateral growth of the Au clusters; (3) 5.2x101717 Au/cm2, coalescence of the Au clusters; (4) 7.7x101718 Au/cm2, vertical growth of the coalesced Au clusters. The application of the dynamic scaling theory of growing interfaces allowed us to calculate the dynamic scaling exponent z=3.8±0.3, the dynamic growth exponent β=0.38±0.03, the roughness exponent α=1.4±0.1 and the Avrami exponent m=0.79±0.02. Finally, the study of the evolution of the mean Au clusters size as a function of annealing time at 873 K allowed us to identify the thermal-induced self-organization mechanism in a surface diffusion limited ripening of 3D structures and also the surface diffusion coefficient of Au on Si(111) at 873 K was estimated in (8.2x10-16)±(3x10-17) m2/s.

  5. Superparamagnetic Au-Fe3O4 nanoparticles: one-pot synthesis, biofunctionalization and toxicity evaluation

    Science.gov (United States)

    Pariti, A.; Desai, P.; Maddirala, S. K. Y.; Ercal, N.; Katti, K. V.; Liang, X.; Nath, M.

    2014-09-01

    Superparamagnetic Au-Fe3O4 bifunctional nanoparticles have been synthesized using a single step hot-injection precipitation method. The synthesis involved using Fe(CO)5 as iron precursor and HAuCl4 as gold precursor in the presence of oleylamine and oleic acid. Oleylamine helps in reducing Au3+ to Au0 seeds which simultaneously oxidizes Fe(0) to form Au-Fe3O4 bifunctional nanoparticles. Triton® X-100 was employed as a highly viscous solvent to prevent agglomeration of Fe3O4 nanoparticles. Detailed characterization of these nanoparticles was performed by using x-ray powder diffraction, transmission electron microscopy, scanning tunneling electron microscopy, UV-visible spectroscopy, Mössbauer and magnetometry studies. To evaluate these nanoparticles’ applicability in biomedical applications, L-cysteine was attached to the Au-Fe3O4 nanoparticles and cytotoxicity of Au-Fe3O4 nanoparticles was tested using CHO cells by employing MTS assay. L-cysteine modified Au-Fe3O4 nanoparticles were qualitatively characterized using Fourier transform infrared spectroscopy and Raman spectroscopy; and quantitatively using acid ninhydrin assay. Investigations reveal that that this approach yields Au-Fe3O4 bifunctional nanoparticles with an average particle size of 80 nm. Mössbauer studies indicated the presence of Fe in Fe3+ in A and B sites (tetrahedral and octahedral, respectively) and Fe2+ in B sites (octahedral). Magnetic measurements also indicated that these nanoparticles were superparamagnetic in nature due to Fe3O4 region. The saturation magnetization for the bifunctional nanoparticles was observed to be ˜74 emu g-1, which is significantly higher than the previously reported Fe3O4 nanoparticles. Mössbauer studies indicated that there was no significant Fe(0) impurity that could be responsible for the superparamagnetic nature of these nanoparticles. None of the investigations showed any presence of other impurities such as Fe2O3 and FeOOH. These Au-Fe3O4 bifunctional

  6. Jets and dijets in Au+Au and p+p collisions at RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Hardtke, D.; STAR Collaboration

    2002-12-09

    Recent data from RHIC suggest novel nuclear effects in the production of high p{sub T} hadrons. We present results from the STAR detector on high p{sub T} angular correlations in Au+Au and p+p collisions at {radical}S = 200 GeV/c. These two-particle angular correlation measurements verify the presence of a partonic hard scattering and fragmentation component at high p{sub T} in both central and peripheral Au+Au collisions. When triggering on a leading hadron with p{sub T}>4 GeV, we observe a quantitative agreement between the jet cone properties in p+p and all centralities of Au+Au collisions. This quantitative agreement indicates that nearly all hadrons with p{sub T}>4 GeV/c come from jet fragmentation and that jet fragmentation properties are not substantially modified in Au+Au collisions. STAR has also measured the strength of back-to-back high p{sub T} charged hadron correlations, and observes a small suppression of the back-to-back correlation strength in peripheral collisions, and a nearly complete disappearance o f back-to-back correlations in central Au+Au events. These phenomena, together with the observed strong suppression of inclusive yields and large value of elliptic flow at high p{sub T}, are consistent with a model where high p{sub T} hadrons come from partons created near the surface of the collision region, and where partons that originate or propagate towards the center of the collision region are substantially slowed or completely absorbed.

  7. Spectra and ratios of identified particles in Au+Au and d+Au collisions at sqrt(s_NN)=200 GeV

    CERN Document Server

    Adare, A; Aidala, C; Ajitanand, N N; Akiba, Y; Al-Bataineh, H; Alexander, J; Angerami, A; Aoki, K; Apadula, N; Aramaki, Y; Atomssa, E T; Averbeck, R; Awes, T C; Azmoun, B; Babintsev, V; Bai, M; Baksay, G; Baksay, L; Barish, K N; Bassalleck, B; Basye, A T; Bathe, S; Baublis, V; Baumann, C; Bazilevsky, A; Belikov, S; Belmont, R; Bennett, R; Berdnikov, A; Berdnikov, Y; Bhom, J H; Bickley, A A; Blau, D S; Bok, J S; Boyle, K; Brooks, M L; Buesching, H; Bumazhnov, V; Bunce, G; Butsyk, S; Camacho, C M; Campbell, S; Caringi, A; Chen, C -H; Chi, C Y; Chiu, M; Choi, I J; Choi, J B; Choudhury, R K; Christiansen, P; Chujo, T; Chung, P; Chvala, O; Cianciolo, V; Citron, Z; Cole, B A; del Valle, Z Conesa; Connors, M; Constantin, P; Csanád, M; Csörgő, T; Dahms, T; Dairaku, S; Danchev, I; Das, K; Datta, A; David, G; Dayananda, M K; Denisov, A; Deshpande, A; Desmond, E J; Dharmawardane, K V; Dietzsch, O; Dion, A; Donadelli, M; Drapier, O; Drees, A; Drees, K A; Durham, J M; Durum, A; Dutta, D; D'Orazio, L; Edwards, S; Efremenko, Y V; Ellinghaus, F; Engelmore, T; Enokizono, A; En'yo, H; Esumi, S; Fadem, B; Fields, D E; Finger, M; Jr., \\,; Fleuret, F; Fokin, S L; Fraenkel, Z; Frantz, J E; Franz, A; Frawley, A D; Fujiwara, K; Fukao, Y; Fusayasu, T; Garishvili, I; Glenn, A; Gong, H; Gonin, M; Goto, Y; de Cassagnac, R Granier; Grau, N; Greene, S V; Grim, G; Perdekamp, M Grosse; Gunji, T; Gustafsson, H -Å; Haggerty, J S; Hahn, K I; Hamagaki, H; Hamblen, J; Han, R; Hanks, J; Hartouni, E P; Haslum, E; Hayano, R; He, X; Heffner, M; Hemmick, T K; Hester, T; Hill, J C; Hohlmann, M; Holzmann, W; Homma, K; Hong, B; Horaguchi, T; Hornback, D; Huang, S; Ichihara, T; Ichimiya, R; Ide, J; Ikeda, Y; Imai, K; Inaba, M; Isenhower, D; Ishihara, M; Isobe, T; Issah, M; Isupov, A; Ivanischev, D; Iwanaga, Y; Jacak, B V; Jia, J; Jiang, X; Jin, J; Johnson, B M; Jones, T; Joo, K S; Jouan, D; Jumper, D S; Kajihara, F; Kametani, S; Kamihara, N; Kamin, J; Kang, J H; Kapustinsky, J; Karatsu, K; Kasai, M; Kawall, D; Kawashima, M; Kazantsev, A V; Kempel, T; Khanzadeev, A; Kijima, K M; Kikuchi, J; Kim, A; Kim, B I; Kim, D H; Kim, D J; Kim, E; Kim, E -J; Kim, S H; Kim, Y -J; Kim, Y J; Kinney, E; Kiriluk, K; Kiss, Á; Kistenev, E; Kleinjan, D; Kochenda, L; Komkov, B; Konno, M; Koster, J; Kotchetkov, D; Kozlov, A; Král, A; Kravitz, A; Kunde, G J; Kurita, K; Kurosawa, M; Kwon, Y; Kyle, G S; Lacey, R; Lai, Y S; Lajoie, J G; Lebedev, A; Lee, D M; Lee, J; Lee, K; Lee, K B; Lee, K S; Leitch, M J; Leite, M A L; Leitner, E; Lenzi, B; Li, X; Lichtenwalner, P; Liebing, P; Levy, L A Linden; Liška, T; Litvinenko, A; Liu, H; Liu, M X; Love, B; Luechtenborg, R; Lynch, D; Maguire, C F; Makdisi, Y I; Malakhov, A; Malik, M D; Manko, V I; Mannel, E; Mao, Y; Masui, H; Matathias, F; McCumber, M; McGaughey, P L; McGlinchey, D; Means, N; Meredith, B; Miake, Y; Mibe, T; Mignerey, A C; Mikeš, P; Miki, K; Milov, A; Mishra, M; Mitchell, J T; Mohanty, A K; Moon, H J; Morino, Y; Morreale, A; Morrison, D P; Moukhanova, T V; Murakami, T; Murata, J; Nagamiya, S; Nagle, J L; Naglis, M; Nagy, M I; Nakagawa, I; Nakamiya, Y; Nakamura, K R; Nakamura, T; Nakano, K; Nam, S; Newby, J; Nguyen, M; Nihashi, M; Nouicer, R; Nyanin, A S; Oakley, C; O'Brien, E; Oda, S X; Ogilvie, C A; Oka, M; Okada, K; Onuki, Y; Oskarsson, A; Ouchida, M; Ozawa, K; Pak, R; Pantuev, V; Papavassiliou, V; Park, I H; Park, J; Park, S K; Park, W J; Pate, S F; Pei, H; Peng, J -C; Pereira, H; Peresedov, V; Peressounko, D Yu; Petti, R; Pinkenburg, C; Pisani, R P; Proissl, M; Purschke, M L; Purwar, A K; Qu, H; Rak, J; Rakotozafindrabe, A; Ravinovich, I; Read, K F; Rembeczki, S; Reygers, K; Riabov, V; Riabov, Y; Richardson, E; Roach, D; Roche, G; Rolnick, S D; Rosati, M; Rosen, C A; Rosendahl, S S E; Rosnet, P; Rukoyatkin, P; Ružička, P; Sahlmueller, B; Saito, N; Sakaguchi, T; Sakashita, K; Samsonov, V; Sano, S; Sato, T; Sawada, S; Sedgwick, K; Seele, J; Seidl, R; Semenov, A Yu; Seto, R; Sharma, D; Shein, I; Shibata, T -A; Shigaki, K; Shimomura, M; Shoji, K; Shukla, P; Sickles, A; Silva, C L; Silvermyr, D; Silvestre, C; Sim, K S; Singh, B K; Singh, C P; Singh, V; Slunečka, M; Soltz, R A; Sondheim, W E; Sorensen, S P; Sourikova, I V; Sparks, N A; Stankus, P W; Stenlund, E; Stoll, S P; Sugitate, T; Sukhanov, A; Sziklai, J; Takagui, E M; Taketani, A; Tanabe, R; Tanaka, Y; Taneja, S; Tanida, K; Tannenbaum, M J; Tarafdar, S; Taranenko, A; Tarján, P; Themann, H; Thomas, D; Thomas, T L; Togawa, M; Toia, A; Tomášek, L; Torii, H; Towell, R S; Tserruya, I; Tsuchimoto, Y; Vale, C; Valle, H; van Hecke, H W; Vazquez-Zambrano, E; Veicht, A; Velkovska, J; Vértesi, R; Vinogradov, A A; Virius, M; Vrba, V; Vznuzdaev, E; Wang, X R; Watanabe, D; Watanabe, K; Watanabe, Y; Wei, F; Wei, R; Wessels, J; White, S N; Winter, D; Wood, J P; Woody, C L; Wright, R M; Wysocki, M; Xie, W; Yamaguchi, Y L; Yamaura, K; Yang, R; Yanovich, A; Ying, J; Yokkaichi, S; You, Z; Young, G R; Younus, I; Yushmanov, I E; Zajc, W A; Zhang, C; Zhou, S; Zolin, L

    2013-01-01

    The transverse momentum (p_T) spectra and ratios of identified charged hadrons (\\pi^+/-, K^+/-, p, p^bar) produced in sqrt(s_NN)=200 GeV Au+Au and d+Au collisions are reported in five different centrality classes for each collision species. The measurements of pions and protons are reported up to p_T=6 GeV/c (5 GeV/c), and the measurements of kaons are reported up to p_T=4 GeV/c (3.5 GeV/c) in Au+Au (d+Au) collisions. In the intermediate p_T region, between 2--5 GeV/c, a significant enhancement of baryon to meson ratios compared to those measured in p+p collisions is observed. This enhancement is present in both Au+Au and d+Au collisions, and increases as the collisions become more central. We compare a class of peripheral Au+Au collisions with a class of central d+Au collisions which have a comparable number of participating nucleons and binary nucleon-nucleon collisions. The p_T dependent particle ratios for these classes display a remarkable similarity, which is then discussed.

  8. Rapidity density distributions in Au+Au and Au+Ag interactions at 11.6 A GeV/c

    International Nuclear Information System (INIS)

    Pseudorapidity density distributions of charged particles in heavy-ion collisions have been studied. The results from EMU01 have been compared to the results from the experiments WA80 and E802. The recently obtained pseudorapidity distributions from Au+Au and Au+Ag interactions have been compared to a linear extrapolation from lighter systems. (orig.)

  9. Relative Distribution of Au48+~Au52+ in Au Plasma by Ionization Dynamics

    Institute of Scientific and Technical Information of China (English)

    ZHUZhi-Yan; ZHUZheng-He; JIANGGang

    2003-01-01

    The present work proposes a theoretical method called ionization dynamics to derive the ionic charge state distribution. Using relativistic quantum mechanics to calculate the energy level lifetime and average ionic lifetime of each ion, the first-order ionization rate constant can be obtained. Based on these data, from the solution of differential equations for consecutive-irreversible ionization reactions, one will be able to derive the ionic charge state distribution.The calculated average positive charge 49.24 of Au48+ ~ Au52+ and their relative distribution are in good agreement with the results of Lawrence Livermore National Laboratory.

  10. Polymerase chain reaction of Au nanoparticle-bound primers

    Institute of Scientific and Technical Information of China (English)

    SHEN Hebai; HU Min; YANG Zhongnan; WANG Chen; ZHU Longzhang

    2005-01-01

    Polymerase chain reaction (PCR) is a useful technique for in vitro amplification of a DNA fragment. In this paper, a PCR procedure using Au nanoparticle (AuNP) -bound primers was systemically studied. The 5′-SH- (CH2)6-modified primers were covalently attached to the AuNP surface via Au-S bonds, and plasmid pBluescript SK was used as a template. The effects of the concentration of AuNP-bound primers, annealing temperature and PCR cycles were evaluated, respectively. The results indicate that PCR can proceed successfully under optimized condition, with either forward or reverse primers bound to the AuNP surface or with both the two primers bound to the AuNP surface. Development of PCR procedure based on AuNPs not only makes the isolation of PCR products very convenient, but also provides novel methods to prepare AuNP-bound ssDNA and nanostructured material.

  11. Graph Machine Based-QSAR Approach for Modeling Thermodynamic Properties of Amines: Application to CO2 Capture in Postcombustion Approche QSAR Graph Machines pour la modélisation des propriétés thermodynamiques des amines : application au captage du CO2 en postcombustion

    Directory of Open Access Journals (Sweden)

    Porcheron F.

    2013-03-01

    Full Text Available Amine scrubbing is usually considered as the most efficient technology for CO2 mitigation through postcombustion Carbon Capture and Storage (CCS. However, optimization of the amine structure to improve the solvent properties requires to sample a large number of possible candidates and hence to gather a large amount of experimental data. In this context, the use of QSAR (Quantitative Structure Activity Relationship statistical modeling is a powerful tool as it performs a mapping of a set of input vectors (i.e. the characteristics or the properties of the molecules under consideration to a set of output vectors (i.e. their targeted properties. In this work, we used a high throughput screening experimental device to measure CO2 solubility data on a set of 46 amine aqueous solutions. Absorption isotherms are represented using a thermodynamic model based on two thermodynamic constants, pKa*  and pKc* , accounting for the main chemical reactions occurring in the liquid phase between amine and CO2. Then, we used a statistical approach named Graph Machines at the same time to cluster the molecules and to model the variation of the acidity constant pKa*  as a function of the molecular structure. The originality of our approach is the use of graphs to represent molecules in multidimensional spaces and simultaneously construct predictive models of their physicochemical properties based on these graphs. This approach is applied in this paper to predict the thermodynamic properties of a set of 5 new molecules. Le procédé d’absorption aux amines est considéré comme la technologie la plus efficace pour limiter les rejets de CO2 dans le cadre du captage en postcombustion puis du stockage du CO2. Cependant, l’optimisation des propriétés du solvant nécessite d’évaluer un grand nombre de candidats potentiels et donc de collecter une quantité importante de propriétés expérimentales. Dans ce contexte, l’utilisation de méthodes de mod

  12. L'impact d'un Système Public d'Information sur l'intégration et l'efficacité des marchés : une application du modèle "Parity Bounds" au cas du maïs au Bénin

    Directory of Open Access Journals (Sweden)

    Kpenavoun Chogou, S.

    2013-01-01

    Full Text Available Measuring the impact of Public Market Information Systems on market integration and efficiency: an application of the Parity Bounds Model in maize markets in Benin. During the 1990s, agricultural market reforms prevailed within the economic liberalization undertaken in many sub-Saharan countries. In these countries, government intervention in the commodity markets through marketing boards or parastatal organizations was abandoned in favor of new market reforms. Public Market Information Systems (PMIS thus emerged as part of these reforms. Even though great positive impacts were expected from these reforms, little empirical work has been carried out to evaluate their effects. This article investigates how PMIS has affected the market performance of maize, a major staple food crop in Benin. We use a modified version of the Parity Bounds Model (PBM. This method allows the estimation of the rates of spatial market efficiency or integration, but also the estimation of the rates of market arbitrage, autarky, profitable opportunities and the violation of market arbitrage conditions. Results showed that Benin's agricultural sector suffered from a lack of quality training in how to follow the government-supported market information system implemented in the early 1990s. Subsequently, PMIS did not significantly improve the degree of market integration, although the reforms did induce new marketing opportunities. Results also showed that the impact of PMIS is limited by other market imperfections, such as entry barriers for non-residents or for persons not in local informal trade organizations, and the non-transparent enforcement of formal regulations. This study therefore recommends the implementation of more efficiency-raising policies in order to encourage competition and to allow PMIS to fulfill the expectations of farmers and consumers. Improving food producers and traders' access to reliable information will allow them to better exploit the market

  13. Au/Si nanorod-based biosensor for food pathogen detection

    Science.gov (United States)

    Technical Abstract Among several potentials of nanotechnology applications for food industry, development of nanoscale sensors for food safety and quality measurement are emerging. A novel biosensor for Salmonella detection was developed using Au/Si nanorods. The Si nanorods were fabricated by gla...

  14. Au/Si Hetero-nanorod-based Biosensor for Salmonella Detection

    Science.gov (United States)

    Among several potentials of nanotechnology applications for food industry, development of nanoscale sensors for food safety and biosecurity measurement are emerging. A novel biosensor for Salmonella detection was developed using Au/Si nanorods. The Si nanorods were fabricated by glancing angle depo...

  15. Study of electrical properties of Au/BN/InP MIS structures

    International Nuclear Information System (INIS)

    The electrical properties of multilayer system type metal-insulator-semiconductor (MIS) have been investigated on the example of Au/BN/InP. Current-voltage as well as capacity-voltage characteristics have been measured. The applicability of such systems in microelectronics have been discussed. 7 refs, 4 figs

  16. Green synthesis of noble nanometals (Au, Pt, Pd) using glycerol under microwave irradiation conditions

    Science.gov (United States)

    A newer application of glycerol in the field of nanomaterials synthesis has been developed from both the economic and environmental points of view. Glycerol can act as a reducing agent for the fabrication of noble nanometals, such as Au, Pt, and Pd, under microwave irradiation. T...

  17. Synthesis and characterization in AuCu–Si nanostructures

    International Nuclear Information System (INIS)

    Au/Cu bilayers with different Au:Cu concentrations (25:75, 50:50 and 75:25 at.%) were deposited on Si(100) substrates by thermal evaporation. The thicknesses of all Au/Cu bilayers were 150 nm. The alloys were prepared by thermal diffusion into a vacuum oven with argon atmosphere at 690 K during 1 h. X-ray diffraction analysis revealed different phases of AuCu and CuSi alloys in the samples after annealing process. CuSi alloys were mainly obtained for 25:75 at.% samples, meanwhile the AuCuII phase dominates for samples prepared with 50:50 at.%. Additionally, the Au:Cu alloys with 75:25 at.%, produce Au2Cu3 and Au3Cu phases. The formed alloys were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) to study the morphology and the elemental concentration of the formed alloys. - Highlights: • AuCu/Si alloy thin films were prepared by thermal diffusion. • Alloys prepared with 50 at.% of Au produce the AuCuII phase. • Alloys prepared with 75 at.% of Au produce Au3Cu and Au2Cu3 phases. • All alloys present diffusion of Si and Cu through the CuSi alloy formation

  18. Synthesis and characterization in AuCu–Si nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Novelo, T.E., E-mail: tenovelo@hotmail.com [Centro de Investigación en Materiales Avanzados, S.C., Laboratorio Nacional de Nanotecnología, Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, Chihuahua Mexico (Mexico); Amézaga-Madrid, P. [Centro de Investigación en Materiales Avanzados, S.C., Laboratorio Nacional de Nanotecnología, Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, Chihuahua Mexico (Mexico); Maldonado, R.D. [Universidad Anáhuac-Mayab, Carretera Mérida-Progreso Km. 15.5 A.P. 96-Cordemex, CP. 97310 Mérida, Yucatán Mexico (Mexico); Oliva, A.I. [Centro de Investigación y de Estudios Avanzados el IPN Unidad Mérida, Departamento de Física Aplicada, Km 6 Antigua Carretera a Progreso, A.P. 73-Cordemex, 97310 Mérida, Yucatán Mexico (Mexico); Alonzo-Medina, G.M. [Universidad Anáhuac-Mayab, Carretera Mérida-Progreso Km. 15.5 A.P. 96-Cordemex, CP. 97310 Mérida, Yucatán Mexico (Mexico)

    2015-03-15

    Au/Cu bilayers with different Au:Cu concentrations (25:75, 50:50 and 75:25 at.%) were deposited on Si(100) substrates by thermal evaporation. The thicknesses of all Au/Cu bilayers were 150 nm. The alloys were prepared by thermal diffusion into a vacuum oven with argon atmosphere at 690 K during 1 h. X-ray diffraction analysis revealed different phases of AuCu and CuSi alloys in the samples after annealing process. CuSi alloys were mainly obtained for 25:75 at.% samples, meanwhile the AuCuII phase dominates for samples prepared with 50:50 at.%. Additionally, the Au:Cu alloys with 75:25 at.%, produce Au{sub 2}Cu{sub 3} and Au{sub 3}Cu phases. The formed alloys were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) to study the morphology and the elemental concentration of the formed alloys. - Highlights: • AuCu/Si alloy thin films were prepared by thermal diffusion. • Alloys prepared with 50 at.% of Au produce the AuCuII phase. • Alloys prepared with 75 at.% of Au produce Au{sub 3}Cu and Au{sub 2}Cu{sub 3} phases. • All alloys present diffusion of Si and Cu through the CuSi alloy formation.

  19. XPS and DFT studies of the electronic structures of AgAuS and Ag3AuS2

    International Nuclear Information System (INIS)

    Highlights: • Photoelectron spectra and DOS were obtained for AgAuS and Ag3AuS2 for the first time. • Essentially higher Au 4f binding energy was found in case of Ag3AuS2. • DFT calculations show a larger overlapping of S 3p and Au 5d valence states for Ag3AuS2. • Energy position of Au 4f levels is mainly influenced by Au–Ag interactions. - Abstract: X-ray photoelectron spectra of core levels and the valence bands were acquired, and the density-of-states (DOS) were calculated using periodic density functional theory (DFT) for synthetic ternary compounds AgAuS and Ag3AuS2, known as minerals petrovskaite uytenbogaardtite, respectively, for the first time. The chemical shift of the Au 4f binding energy as large as 0.65 eV relative to bulk elemental gold was found for Ag3AuS2, in contrast to only about 0.3 eV for AgAuS. The DFT analysis showed, in particular, that the S 3p states are largely pushed out from the Ag 4d and Au 5d bands affording two sub-bands in the valence region of both substances, but the overlapping of the S 3p and Au 5d states is larger for Ag3AuS2. It was demonstrated that the energy position of Au 4f levels is mainly influenced by Au–Ag interaction, and increasing the number of Ag atoms in the first coordination shell of S–Au–S units on going from AgAuS to Ag3AuS2 results in the positive shift of the Au 4f bands consistent with the experimental data

  20. Electrophoretic deposition of fluorescent Cu and Au sheets for light-emitting diodes

    Science.gov (United States)

    Liu, Jiale; Wu, Zhennan; Li, Tingting; Zhou, Ding; Zhang, Kai; Sheng, Yu; Cui, Jianli; Zhang, Hao; Yang, Bai

    2015-12-01

    Electrophoretic deposition (EPD) is a conventional method for fabricating film materials from nanometer-sized building blocks, and exhibits the advantages of low-cost, high-efficiency, wide-range thickness adjustment, and uniform deposition. Inspired by the interest in the application of two-dimensional (2D) nanomaterials, the EPD technique has been recently extended to building blocks with 2D features. However, the studies are mainly focused on simplex building blocks. The utilization of multiplex building blocks is rarely reported. In this work, we demonstrate a controlled EPD of Cu and Au sheets, which are 2D assemblies of luminescent Cu and Au nanoclusters. Systematic investigations reveal that both the deposition efficiency and the thickness are determined by the lateral size of the sheets. For Cu sheets with a large lateral size, a high ζ-potential and strong face-to-face van der Waals interactions facilitate the deposition with high efficiency. However, for Au sheets, the small lateral size and ζ-potential limit the formation of a thick film. To solve this problem, the deposition dynamics are controlled by increasing the concentration of the Au sheets and adding acetone. This understanding permits the fabrication of a binary EPD film by the stepwise deposition of Cu and Au sheets, thus producing a luminescent film with both Cu green emission and Au red emission. A white light-emitting diode prototype with color coordinates (x, y) = (0.31, 0.36) is fabricated by employing the EPD film as a color conversion layer on a 365 nm GaN clip and further tuning the amount of deposited Cu and Au sheets.Electrophoretic deposition (EPD) is a conventional method for fabricating film materials from nanometer-sized building blocks, and exhibits the advantages of low-cost, high-efficiency, wide-range thickness adjustment, and uniform deposition. Inspired by the interest in the application of two-dimensional (2D) nanomaterials, the EPD technique has been recently extended to

  1. Recommandations essentielles de sécurité relatives au travail du personnel des laboratoires géologiques de chantier Essential Safety Recommendations Concerning Work by Personnel in Well Site Mud Logging Units

    Directory of Open Access Journals (Sweden)

    Chambre Syndicale du Pétrole

    2006-11-01

    Full Text Available Le personnel travaillant dans les cabines géologiques sur chantiers de forage doit respecter des règles de sécurité pour la prévention des accidents et doit connaître nécessairement les consignes à suivre en cas de danger. Ces recommandations sont relatives à l'installation des cabines géologiques et aux problèmes créés par leur équipement très diversifié, comprenant notamment de nombreux capteurs dispersés sur le chantier et leur réseau de câbles de liaison. Huit annexes rappellent les risques inhérents à la présence d'hydrogène sulfuré et les conditions d'utilisation des appareils de protection, les problèmes liés aux fours à micro-ondes éventuellement installés, ceux liés à la présence de sources radioactives. Une large part de ces recommandations est consacrée au stockage, à la manipulation et à l'élimination des produits chimiques couramment présents dans les cabines. Dix-neuf fiches de prévention simplifiées rappellent les risques que ces produits chimiques font courir au personnel et précisent les premiers soins à appliquer. Les deux dernières annexes traitent de la définition des zones classées pour les forages à terre et les forages en mer. The personnel working in mud logging units at well sites must respect safety rules for the prevention of accidents and must know the instructions to be followed in case of danger. These recommendations concern the installation of logging units and the problems created by the highly diversified equipment in such units, including in particular numerous sensors scattered around the site and the network of cables linking the sensors to the unit. Eight appendixes review the risks inherent in the presence of hydrogen sulfide and the conditions for using protective equipment, the problems linked to any microwave ovens that may be installed, and the problems linked to the presence of radioactive sources. A large portion of these recommen-dations is devoted to

  2. Au nanoparticles films used in biological sensing

    Energy Technology Data Exchange (ETDEWEB)

    Rosales Perez, M; Delgado Macuil, R; Rojas Lopez, M; Gayou, V L [Centro de Investigacion en BiotecnologIa Aplicada del IPN, Tepetitla Tlaxcala Mexico C.P. 90700 (Mexico); Sanchez Ramirez, J F, E-mail: mrosalespe@ipn.m [CICATA Legaria Instituto Politecnico Nacional, Mexico Distrito Federal (Mexico)

    2009-05-01

    Lactobacillus para paracasei are used commonly as functional food and probiotic substances. In this work Au nanoparticles self-assembled films were used for Lactobacillus para paracasei determination at five different concentrations. Functionalized substrates were immersed in a colloidal solution for one and a half hour at room temperature and dried at room temperature during four hours. After that, drops of Lactobacillus para paracasei in aqueous solution were put into the Au nanoparticles film and let dry at room temperature for another two hours. Infrared spectroscopy in attenuated total reflectance sampling mode was used to observe generation peaks due to substrate silanization, enhancement of Si-O band intensity due to the Au colloids added to silanized substrate and also to observe the enhancement of Lactobacillus para paracasei infrared intensity of the characteristic frequencies at 1650, 1534 and 1450 cm{sup -1} due to surface enhancement infrared absorption.

  3. Au nanoparticles films used in biological sensing

    International Nuclear Information System (INIS)

    Lactobacillus para paracasei are used commonly as functional food and probiotic substances. In this work Au nanoparticles self-assembled films were used for Lactobacillus para paracasei determination at five different concentrations. Functionalized substrates were immersed in a colloidal solution for one and a half hour at room temperature and dried at room temperature during four hours. After that, drops of Lactobacillus para paracasei in aqueous solution were put into the Au nanoparticles film and let dry at room temperature for another two hours. Infrared spectroscopy in attenuated total reflectance sampling mode was used to observe generation peaks due to substrate silanization, enhancement of Si-O band intensity due to the Au colloids added to silanized substrate and also to observe the enhancement of Lactobacillus para paracasei infrared intensity of the characteristic frequencies at 1650, 1534 and 1450 cm-1 due to surface enhancement infrared absorption.

  4. Au nanoparticles films used in biological sensing

    Science.gov (United States)

    Rosales Pérez, M.; Delgado Macuil, R.; Rojas López, M.; Gayou, V. L.; Sánchez Ramírez, J. F.

    2009-05-01

    Lactobacillus para paracasei are used commonly as functional food and probiotic substances. In this work Au nanoparticles self-assembled films were used for Lactobacillus para paracasei determination at five different concentrations. Functionalized substrates were immersed in a colloidal solution for one and a half hour at room temperature and dried at room temperature during four hours. After that, drops of Lactobacillus para paracasei in aqueous solution were put into the Au nanoparticles film and let dry at room temperature for another two hours. Infrared spectroscopy in attenuated total reflectance sampling mode was used to observe generation peaks due to substrate silanization, enhancement of Si-O band intensity due to the Au colloids added to silanized substrate and also to observe the enhancement of Lactobacillus para paracasei infrared intensity of the characteristic frequencies at 1650, 1534 and 1450 cm-1 due to surface enhancement infrared absorption.

  5. Low-pressure Environmental TEM (ETEM) studies of Au assisted MgO nanorod growth

    DEFF Research Database (Denmark)

    Duchstein, Linus Daniel Leonhard; Damsgaard, Christian Danvad; Hansen, Thomas Willum;

    2012-01-01

    Over the past few decades, there has been an increasing interest in the use of supported nanoparticles in applications ranging from drug delivery to catalysis. The functionality of such nanoparticles is to a large extent controlled by their shape and exposed surface facets. However, information...... 300keV electron beam with a residual pressure of 10-6mbar and a current density 10-1A/cm². Over a period of one hour, growth of MgO nanorods catalyzed by Au nanoparticles is observed. Eventually the Au nanoparticles fall off, leaving the MgO nanorods for beam induced dissolution. Figure 2 shows the...

  6. Proton beam writing and electroplating for the fabrication of high aspect ratio Au microstructures

    International Nuclear Information System (INIS)

    We present an approach to fabricate tall high aspect ratio Au microstructures by means of proton beam direct writing. Combining proton beam direct writing and electroplating, we successfully produced gold structures with sub-micrometer lateral dimensions, structure heights in excess of 11 μm, and aspect ratios over 28. Sidewall quality of the Au structures was improved by lowering the process temperature to 20 deg. C when developing PMMA patterns with GG developer. The application of such structures as X-ray masks for deep X-ray lithography with synchrotron radiation was demonstrated.

  7. Proton beam writing and electroplating for the fabrication of high aspect ratio Au microstructures

    Energy Technology Data Exchange (ETDEWEB)

    Yue Weisheng [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Ren Yaping [Singapore Synchrotron Light Source, National University of Singapore, 5 Research Link, Singapore 117603 (Singapore); Kan, Jeroen Anton van; Chiam, S.-Y. [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Jian, Linke; Moser, Herbert O. [Singapore Synchrotron Light Source, National University of Singapore, 5 Research Link, Singapore 117603 (Singapore); Osipowicz, Thomas [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore)], E-mail: phyto@nus.edu.sg; Watt, Frank [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore)

    2009-07-01

    We present an approach to fabricate tall high aspect ratio Au microstructures by means of proton beam direct writing. Combining proton beam direct writing and electroplating, we successfully produced gold structures with sub-micrometer lateral dimensions, structure heights in excess of 11 {mu}m, and aspect ratios over 28. Sidewall quality of the Au structures was improved by lowering the process temperature to 20 deg. C when developing PMMA patterns with GG developer. The application of such structures as X-ray masks for deep X-ray lithography with synchrotron radiation was demonstrated.

  8. Conducting shrinkable nanocomposite based on au-nanoparticle implanted plastic sheet: tunable thermally induced surface wrinkling.

    Science.gov (United States)

    Greco, Francesco; Bellacicca, Andrea; Gemmi, Mauro; Cappello, Valentina; Mattoli, Virgilio; Milani, Paolo

    2015-04-01

    A thermally shrinkable and conductive nanocomposite material is prepared by supersonic cluster beam implantation (SCBI) of neutral Au nanoparticles (Au NPs) into a commercially available thermo-retractable polystyrene (PS) sheet. Micronanowrinkling is obtained during shrinking, which is studied by means of SEM, TEM and AFM imaging. Characteristic periodicity is determined and correlated with nanoparticle implantation dose, which permits us to tune the topographic pattern. Remarkable differences emerged with respect to the well-known case of wrinkling of bilayer metal-polymer. Wrinkled composite surfaces are characterized by a peculiar multiscale structuring that promises potential technological applications in the field of catalytic surfaces, sensors, biointerfaces, and optics, among others. PMID:25811100

  9. Pracovní spokojenost au-pair

    OpenAIRE

    Tomíšková, Tereza

    2013-01-01

    The topic of the following diploma thesis is the explanation of the concept of job satisfaction while holding an au-pair position. The aim of this thesis is to analyze the job satisfaction young women (or men), who go abroad to work as au-pair, can feel. The first part of the analysis consists in a theoretical assessment of the mentioned topic, that is to say provide the reader with basic terminology and information about this area of domestic work; we will also sketch out the main factors in...

  10. Desulfurization of thiophene on Au/TiC(001): Au-C interactions and charge polarization.

    Science.gov (United States)

    Rodriguez, José A; Liu, Ping; Takahashi, Yoshiro; Nakamura, Kenichi; Viñes, Francesc; Illas, Francesc

    2009-06-24

    Photoemission and first-principles DF calculations were used to study the interaction of thiophene with TiC(001) and Au/TiC(001) surfaces. The adsorption strength of thiophene on TiC(001) is weak, and the molecule desorbs at temperatures below 200 K. The molecule binds to Ti centers of TiC(001) through its sulfur atom with negligible structural perturbations. In spite of the very poor desulfurization performance of TiC(001) or Au(111), a Au/TiC(001) system displays a hydrodesulfurization activity higher than that of conventional Ni/MoS(x) catalysts. The AuTiC(001) interactions induce a polarization of electron density around Au which substantially increases the chemical reactivity of this metal. Au nanoparticles drastically increase the hydrodesulfurization activity of TiC(001) by enhancing the bonding energy of thiophene and by helping in the dissociation of H(2) to produce the hydrogen necessary for the hydrogenolysis of C-S bonds and the removal of sulfur. H(2) spontaneously dissociates on small two-dimensional clusters of gold in contact with TiC(001). On these systems, the adsorption energy of thiophene is 0.45-0.65 eV larger than that on TiC(001) or Au(111). Thiophene binds in a eta(5) configuration with a large elongation (approximately 0.2 A) of the C-S bonds. PMID:19530731

  11. Ω production in p+p, Au+Au and U+U collisions at STAR

    International Nuclear Information System (INIS)

    We report STAR's high precision measurements on Ω production at mid-rapidity from √(s)=200 GeVp+p, central √(sNN)=200 GeVAu+Au, and central √(sNN)=193 GeVU+U collisions. With the significantly reduced uncertainty in p+p reference, we observe that the Ω enhancement factors at RHIC are in between SPS and LHC, while enhancement factors are systematically larger in central U+U collisions than in central Au+Au collisions. The ΩRAA is much larger than protons and pions for pT up to 4 GeV/c in central Au+Au collisions. The ratio of ΩRAA in central U+U to that in central Au+Au collisions is above unity for pT up to 6 GeV/c, which indicates coalescence/recombination to be the dominant production mechanism for Ω in these collisions for the measured pT range

  12. Plasmonic Fano resonance and dip of Au-SiO2-Au nanomatryoshka.

    Science.gov (United States)

    Liaw, Jiunn-Woei; Chen, Huang-Chih; Kuo, Mao-Kuen

    2013-01-01

    This study theoretically investigates Fano resonances and dips of an Au-SiO2-Au nanomatryoshka that is excited by a nearby electric dipole. An analytical solution of dyadic Green's functions is used to analyze the radiative and nonradiative power spectra of a radial dipole in the proximity of a nanomatryoshka. From these spectra, the plasmon modes and Fano resonances that accompany the Fano dips are identified. In addition, the scattering and absorption spectra of a nanomatryoshka that is illuminated by a plane wave are investigated to confirm these modes and Fano dips. Our results reveal that a Fano dip splits each of the dipole and quadrupole modes into bonding and anti-bonding modes. The Fano dip and resonance result from the destructive interference of the plasmon modes of the Au shell and the Au core. The Fano factors that are obtained from the nonradiative power spectra of the Au shell and the Au core of a nanomatryoshka are in accordance with those obtained from the absorption cross section spectra. Moreover, these Fano factors increase as the plasmonic coupling of the Au shell with the core increases for both dipole and quadrupole modes. PMID:24206789

  13. The swelling of clays and its effects on underground storage works; Le Gonflement des argiles et ses effets sur les ouvrages souterrains de stockage

    Energy Technology Data Exchange (ETDEWEB)

    Gaombalet, J

    2004-03-15

    The aim of this work is to study the swelling of clays and more generally the clayey media in relation to storage. Different types of clays, natural or reworked, have been studied in a rheological point of view, with the aim to result in behavior laws allowing to reproduce some identified phenomena. The first part of this work is a presentation of the concept of geological underground storage. The second part deals with clays. They are studied at a microscopic level and their macroscopic behavior are presented too. In the third part, the equations of the couplings: mechanics/transport in the porous media in general and applied to clays are formulated. Three types of clays have particularly been studied: a stiff clay, a plastic clay and a reworked clay. The following part deals with the swelling of clays. The analysis carried out through a bibliographical study has led us to propose a behavior law for the swelling-retirement. This part concerns essentially the mechanics. The behavior model, which integrates the swelling, involves the concentration of the ions present in solution in the interstitial water. Concerning the transport, of water or ions, the research of coherent models have led us to revise some models described in the second part and concerning the transport of solutions in porous media. The last part concerns the computerized simulation. It begins by a brief description of the computer code. We show how the equations described in the work are dealt with in the computer code. At last, some storage applications (computerized simulation) are given. (O.M.)

  14. Hydrogen-based energy storage unit for stand alone PV systems; L'hydrogene electrolytique comme moyen de stockage d'electricite pour systemes photovoltaiques isoles

    Energy Technology Data Exchange (ETDEWEB)

    Labbe, J

    2006-12-15

    Stand alone systems supplied only by a photovoltaic generator need an energy storage unit to be fully self sufficient. Lead acid batteries are commonly used to store energy because of their low cost, despite several operational constraints. A hydrogen-based energy storage unit (HESU) could be another candidate, including an electrolyser, a fuel cell and a hydrogen tank. However many efforts still need to be carried out for this technology to reach an industrial stage. In particular, market outlets must be clearly identified. The study of small stationary applications (few kW) is performed by numerical simulations. A simulator is developed in the Matlab/Simulink environment. It is mainly composed of a photovoltaic field and a storage unit (lead acid batteries, HESU, or hybrid storage HESU/batteries). The system component sizing is achieved in order to ensure the complete system autonomy over a whole year of operation. The simulator is tested with 160 load profiles (1 kW as a yearly mean value) and three locations (Algeria, France and Norway). Two coefficients are set in order to quantify the correlation between the power consumption of the end user and the renewable resource availability at both daily and yearly scales. Among the tested cases, a limit value of the yearly correlation coefficient came out, enabling to recommend the use of the most adapted storage to a considered case. There are cases for which using HESU instead of lead acid batteries can increase the system efficiency, decrease the size of the photovoltaic field and improve the exploitation of the renewable resource. In addition, hybridization of HESU with batteries always leads to system enhancements regarding its sizing and performance, with an efficiency increase by 10 to 40 % depending on the considered location. The good agreement between the simulation data and field data gathered on real systems enabled the validation of the models used in this study. (author)

  15. Modélisation paramétrique non linéaire des machines asynchrones et démarche d'optimisation associée. Application au dimensionnement dans les véhicules hybrides.

    OpenAIRE

    Pugsley, Gareth

    2004-01-01

    In this work, we studied induction machines for automotive traction applications, more specifically, for hybrid vehicles. We developped the necessary models and methods to analyse and design such electric machines. First, we used a limited number of finite element computations to establish a non-linear electromagnetic model of the machine. This model was then adapted to study the sensitivity of the design for the most signifiant geometric variations. Thus, we can easily adapt a machine for ne...

  16. Utilisation d'une technique d'empreinte moléculaire dans l'étude d'écosystèmes microbiens complexes. Application à la fabrication d'un fromage au lait cru "l'AOC Salers "

    OpenAIRE

    Godon, Jean-Jacques; Duthoit, Frédérique; Delbès, Céline; Millet, Liliane; Montel, Marie-Christine

    2001-01-01

    Use of molecular fingerprint for the study of complex microbial ecosystem. Application to AOC Salers cheese. SSCP technique (Single Strand Conformation Polymorphism) linked to molecular identification of the microflora based on 16S rDNA sequence allowed to perform a molecular fingerprinting of microbial ecosystems. Without cultural step this fingerprint carried out the characterisation of the microbial diversity, the comparison of closed microflora. The dynamic of the microflora can be follow...

  17. Génération et caractérisation d'impulsions façonnées - Application au contrôle spatio-temporel de la lumière diffusée

    OpenAIRE

    Tajalli, Ayhan

    2012-01-01

    This PhD thesis concerns a range of technological studies and physical applications within the fields of ultrafast science and coherent control. From the technological point of view, we have performed a comprehensive study of space-time coupling within the 'Dazzler' AOPDF pulse shaper using interferometric techniques. For a while such limitations of '4f' zero-dispersion line pulse shapers have been widely documented; our results were the first to demonstrate, quantify and explain a parallel e...

  18. Facile preparation of novel core-shell enzyme-Au-polydopamine-Fe₃O₄ magnetic bionanoparticles for glucosesensor.

    Science.gov (United States)

    Peng, Hua-Ping; Liang, Ru-Ping; Zhang, Li; Qiu, Jian-Ding

    2013-04-15

    In this study, a novel biomolecule immobilization approach has been proposed to the synthesis of multi-functional core-shell glucose oxidase-Au-polydopamine-Fe₃O₄ magnetic bionanoparticles (GOx-Au-PDA-Fe₃O₄ MBNPs) using the one-pot chemical polymerization method. Then, a high performance biosensor has been constructed by effectively attaching the proposed GOx-Au-PDA-Fe₃O₄ MBNPs to the surface of the magnetic glassy carbon electrode. Scanning electron microscope, energy dispersive x-ray spectrometer, UV-vis spectroscopy, and electrochemical methods were used to characterize the GOx-Au-PDA-Fe₃O₄ MBNPs. The resultant GOx-Au-PDA-Fe₃O₄ MBNPs not only have the magnetism of Fe₃O₄ nanoparticles which makes them easily manipulated by an external magnetic field, but also have the excellent biocompatibility of PDA to maintain the native structure of the GOx, and good conductivity of Au nanoparticles which can facilitate the direct electrochemistry of GOx in the biofilm. Hence, the present GOx-Au-PDA-Fe₃O₄ biofilm displays good linear amperometric response to glucose concentration ranging from 0.02 to 1.875 mM. This efficient biomolecule immobilization platform is recommended for the preparation of many other MBNPs with interesting properties and application potentials in many fields, such as biosensing, biocatalysis, biofuel cells, and bioaffinity separation. PMID:23208101

  19. The nanostructured Au-doped cobalt oxyhydroxide based carbon monoxide sensor for fire detection at its earlier stages

    International Nuclear Information System (INIS)

    Two nanostructures of cobalt oxyhydroxide (CoOOH) and Au-loaded CoOOH with amount of Au (0.05, 0.5 and 1 mass%), respectively, were investigated for gas sensing properties to combustion by-product pollutants, which are typical for early stages of fire. The nanostructured p-type semiconductor films have shown good sensitivity to carbon monoxide (CO) in the temperature range 50–110 °C with the maximum sensitivity to CO at 80 °C. As the amount of Au-load increased to 0.5 mass%, the improvement in both CO sensitivity and response/recovery rates has been established. The additional increase of the Au-load up to 1 mass% degraded the CO sensing properties of the device. Cross-sensitivity investigation of the sensor to various gases co-existing at the earlier stages of fire revealed that CO sensitivity of nanostructured Au-loaded CoOOH is the highest among other gases. The morphologies of the prepared Au-doped CoOOH samples have been studied by x-ray diffraction (XRD), energy-dispersive x-ray diffraction (EDX) and scanning electron microscopy (SEM) techniques. The promoting effects of Au loads were discussed. The results of this work may be applicable for further development of carbon monoxide sensors for fire detection at its earlier stages

  20. Coupled Large Scale Hydromechanical Modelling for Caprock Failure Risk Assessment of CO2 Storage in Deep Saline Aquifers Analyse hydromécanique à grande échelle pour l’évaluation du risque de fracturation de la couverture de stockage du CO2 dans les aquifères profonds

    Directory of Open Access Journals (Sweden)

    Rohmer J.

    2010-04-01

    key aspects for risk management. The maximum overpressure is reached rapidly after a couple of years, the lateral extension of the “overpressurized” zone induced by the injection is very large (> 50 km and the most critical zone is the injection near zone (distance Cet article présente une méthodologie de simulation hydromécanique à grande échelle pour évaluer le risque de fracturation des formations de couverture dans le contexte de stockage géologique du CO2 dans les aquifères profonds. Cette stratégie est basée sur le développement d’un couplage externe entre un code de transport multiphasique (TOUGH2 et un code de calcul hydromécanique (Code_Aster. L’outil développé nous permet de réaliser des simulations hydromécaniques couplées à l’échelle régionale (étendue de 100 km. Différents mécanismes de dégradation mécanique de la couverture peuvent être vérifiés à l’issu de ces simulations. Une stratégie par scénarios est également proposée afin de tenir compte de l’influence des incertitudes des paramètres du modèle sur le risque de fracturation. Le cas de la couverture de l’aquifère profond du Dogger dans le contexte du bassin de Paris est traité comme un exemple d’application. La simulation est réalisée à grande échelle pour une injection de CO2 à un débit industriel (10 Mt/an. L’estimation de l’état des contraintes après 10 ans d’injection est réalisée par le couplage séquentiel TOUGH2/Code_Aster. Deux modes de fracturation sont évalués, à savoir la création de fractures par traction et la réactivation par cisaillement de fractures pré-existantes. Un premier scénario de référence est défini en affectant aux différentes couches leurs propriétés moyennes. Une étude de sensibilité montre l’importance de la définition de l’état initial des contraintes et des propriétés hydrauliques du réservoir sur les modes de ruptures de la couverture. Sur cette base, un deuxième sc