WorldWideScience

Sample records for apical cup assembly

  1. Optimization of the processes of sterilization and micropropagation of cup plant (Silphium perfoliatum L. from apical explants of seedlings in in vitro cultures

    Directory of Open Access Journals (Sweden)

    Magdalena Tomaszewska-Sowa

    2012-12-01

    Full Text Available Cup plant (Silphium perfoliatum L. is a tall, reaching up to 2.5 m, perennial plant that represents the Asteraceae family. Silphium perfoliatum L. can be applied in medicine, animal feeding, and as a decorative, honey-producing and energy production plant which proves its multi-functional features. Sowing material currently available in Poland is insufficient, which justifies the present attempts at propagating these plants in in vitro cultures. Therefore, Silphium perfoliatum L. seed sterilization and micropropagation processes were studied under controlled conditions in in vitro cultures. Among the tested methods, ACE proved to be the most effective for sterilization. The apical parts of seedlings were used as explants; they were placed onto MS media with growth regulators added. 4 growth regulator concentration variants were applied. The highest percentage of explants with lateral shoots (41.7% and callus (90.3% was obtained on MS medium with 5 mg x dm-3 BAP + 1 mg × dm-3 NAA added. Shoots were isolated and transferred onto MS rooting medium without growth regulators. The rooted plants were transferred to the greenhouse and acclimatised to ex vitro conditions.

  2. Obstructor A Organizes Matrix Assembly at the Apical Cell Surface to Promote Enzymatic Cuticle Maturation in Drosophila*

    Science.gov (United States)

    Pesch, Yanina-Yasmin; Riedel, Dietmar; Behr, Matthias

    2015-01-01

    Assembly and maturation of the apical extracellular matrix (aECM) is crucial for protecting organisms, but underlying molecular mechanisms remain poorly understood. Epidermal cells secrete proteins and enzymes that assemble at the apical cell surface to provide epithelial integrity and stability during developmental growth and upon tissue damage. We analyzed molecular mechanisms of aECM assembly and identified the conserved chitin-binding protein Obst-A (Obstructor A) as an essential regulator. We show in Drosophila that Obst-A is required to coordinate protein and chitin matrix packaging at the apical cell surface during development. Secreted by epidermal cells, the Obst-A protein is specifically enriched in the apical assembly zone where matrix components are packaged into their highly ordered architecture. In obst-A null mutant larvae, the assembly zone is strongly diminished, resulting in severe disturbance of matrix scaffold organization and impaired aECM integrity. Furthermore, enzymes that support aECM stability are mislocalized. As a biological consequence, cuticle architecture, integrity, and function are disturbed in obst-A mutants, finally resulting in immediate lethality upon wounding. Our studies identify a new core organizing center, the assembly zone that controls aECM assembly at the apical cell surface. We propose a genetically conserved molecular mechanism by which Obst-A forms a matrix scaffold to coordinate trafficking and localization of proteins and enzymes in the newly deposited aECM. This mechanism is essential for maturation and stabilization of the aECM in a growing and remodeling epithelial tissue as an outermost barrier. PMID:25737451

  3. Actin-interacting protein 1 controls assembly and permeability of intestinal epithelial apical junctions.

    Science.gov (United States)

    Lechuga, Susana; Baranwal, Somesh; Ivanov, Andrei I

    2015-05-01

    Adherens junctions (AJs) and tight junctions (TJs) are crucial regulators of the integrity and restitution of the intestinal epithelial barrier. The structure and function of epithelial junctions depend on their association with the cortical actin cytoskeleton that, in polarized epithelial cells, is represented by a prominent perijunctional actomyosin belt. The assembly and stability of the perijunctional cytoskeleton is controlled by constant turnover (disassembly and reassembly) of actin filaments. Actin-interacting protein (Aip) 1 is an emerging regulator of the actin cytoskeleton, playing a critical role in filament disassembly. In this study, we examined the roles of Aip1 in regulating the structure and remodeling of AJs and TJs in human intestinal epithelium. Aip1 was enriched at apical junctions in polarized human intestinal epithelial cells and normal mouse colonic mucosa. Knockdown of Aip1 by RNA interference increased the paracellular permeability of epithelial cell monolayers, decreased recruitment of AJ/TJ proteins to steady-state intercellular contacts, and attenuated junctional reassembly in a calcium-switch model. The observed defects of AJ/TJ structure and functions were accompanied by abnormal organization and dynamics of the perijunctional F-actin cytoskeleton. Moreover, loss of Aip1 impaired the apico-basal polarity of intestinal epithelial cell monolayers and inhibited formation of polarized epithelial cysts in 3-D Matrigel. Our findings demonstrate a previously unanticipated role of Aip1 in regulating the structure and remodeling of intestinal epithelial junctions and early steps of epithelial morphogenesis.

  4. The PprA-PprB two-component system activates CupE, the first non-archetypal Pseudomonas aeruginosa chaperione-usher pathway system assembling fimbriae

    DEFF Research Database (Denmark)

    Giraud, Caroline; Bernard, Christophe S.; Calderon, Virginie

    2011-01-01

    two-component system (TCS) as a regulator of cupE expression, and further demonstrated the involvement of the PprAB TCS in direct CupE fimbrial assembly activation. Thus, this TCS represents a new regulatory element controlling the transition between planktonic and community lifestyles in P......The opportunistic pathogen Pseudomonas aeruginosa has redundant molecular systems that contribute to its pathogenicity. Those assembling fimbrial structures promote complex organized community lifestyle. We characterized a new 5.8 kb genetic locus, cupE, that includes the conserved usher...... at least CupE1 protein, at the bacterial cell surface. These fimbriae not only played a significant role in the early stages (microcolony and macrocolony formation) but also in shaping 3D mushrooms during P. aeruginosa biofilm development. Using wide-genome transposon mutagenesis, we identified the PprAB...

  5. The PprA-PprB two-component system activates CupE, the first non-archetypal Pseudomonas aeruginosa chaperone-usher pathway system assembling fimbriae.

    Science.gov (United States)

    Giraud, Caroline; Bernard, Christophe S; Calderon, Virginie; Yang, Liang; Filloux, Alain; Molin, Søren; Fichant, Gwennaele; Bordi, Christophe; de Bentzmann, Sophie

    2011-03-01

    The opportunistic pathogen Pseudomonas aeruginosa has redundant molecular systems that contribute to its pathogenicity. Those assembling fimbrial structures promote complex organized community lifestyle. We characterized a new 5.8 kb genetic locus, cupE, that includes the conserved usher- and chaperone-encoding genes. This locus, widely conserved in different bacterial species, contains four additional genes encoding non-archetypal fimbrial subunits. We first evidenced that the cupE gene cluster was specifically expressed in biofilm conditions and was responsible for fibre assembly containing at least CupE1 protein, at the bacterial cell surface. These fimbriae not only played a significant role in the early stages (microcolony and macrocolony formation) but also in shaping 3D mushrooms during P. aeruginosa biofilm development. Using wide-genome transposon mutagenesis, we identified the PprAB two-component system (TCS) as a regulator of cupE expression, and further demonstrated the involvement of the PprAB TCS in direct CupE fimbrial assembly activation. Thus, this TCS represents a new regulatory element controlling the transition between planktonic and community lifestyles in P. aeruginosa.

  6. Optimization of the processes of sterilization and micropropagation of cup plant (Silphium perfoliatum L.) from apical explants of seedlings in in vitro cultures

    OpenAIRE

    2012-01-01

    Cup plant (Silphium perfoliatum L.) is a tall, reaching up to 2.5 m, perennial plant that represents the Asteraceae family. Silphium perfoliatum L. can be applied in medicine, animal feeding, and as a decorative, honey-producing and energy production plant which proves its multi-functional features. Sowing material currently available in Poland is insufficient, which justifies the present attempts at propagating these plants in in vitro cultures. Therefore, Silphium perfoliatum L. seed steril...

  7. Lamp with a truncated reflector cup

    Science.gov (United States)

    Li, Ming; Allen, Steven C.; Bazydola, Sarah; Ghiu, Camil-Daniel

    2013-10-15

    A lamp assembly, and method for making same. The lamp assembly includes first and second truncated reflector cups. The lamp assembly also includes at least one base plate disposed between the first and second truncated reflector cups, and a light engine disposed on a top surface of the at least one base plate. The light engine is configured to emit light to be reflected by one of the first and second truncated reflector cups.

  8. Fast-response cup anemometer features cosine response

    Science.gov (United States)

    Frenzen, P.

    1968-01-01

    Six-cup, low-inertia anemometer combines high resolution and fast response with a unique ability to sense only the horizontal component of the winds fluctuating rapidly in three dimensions. Cup assemblies are fabricated of expanded polystyrene plastic.

  9. Apical cap

    Energy Technology Data Exchange (ETDEWEB)

    McLoud, T.C.; Isler, R.J.; Novelline, R.A.; Putman, C.E.; Simeone, J.; Stark, P.

    1981-08-01

    Apical caps, either unilateral or bilateral, are a common feature of advancing age and are usually the result of subpleural scarring unassociated with other diseases. Pancoast (superior sulcus) tumors are a well recognized cause of unilateral asymmetric apical density. Other lesions arising in the lung, pleura, or extrapleural space may produce unilateral or bilateral apical caps. These include: (1) inflammatory: tuberculosis and extrapleural abscesses extending from the neck; (2) post radiation fibrosis after mantle therapy for Hodgkin disease or supraclavicular radiation in the treatment of breast carcinoma; (3) neoplasm: lymphoma extending from the neck or mediastinum, superior sulcus bronchogenic carcinoma, and metastases; (4) traumatic: extrapleural dissection of blood from a ruptured aorta, fractures of the ribs or spine, or hemorrhage due to subclavian line placement; (5) vascular: coarctation of the aorta with dilated collaterals over the apex, fistula between the subclavian artery and vein; and (6) miscellaneous: mediastinal lipomatosis with subcostal fat extending over the apices.

  10. Venture Cup

    OpenAIRE

    Hulshoff, Selma

    2013-01-01

    Abstract Venture Cup began as a small project with a financial purpose mixed with a societal goal. In 2000 when the project could not fulfil the financial goal of being a feeding structure of new client enterprises, it was passed on. This resulted in a structured organisation which has become a cultural change agent in the Danish field of Entrepreneurship. The life cycle process of a cultural change organisation and the influencing factors are the interest of this thesis. The stakeholders...

  11. Impact biomechanics and pelvic deformation during insertion of press-fit acetabular cups.

    Science.gov (United States)

    Kroeber, Markus; Ries, Michael D; Suzuki, Yoshihiro; Renowitzky, Glen; Ashford, Frank; Lotz, Jeff

    2002-04-01

    Five fresh cadaver pelves were cleaned of soft tissue and instrumented with strain gauges. The acetabula were reamed, and a cementless cup, oversized at the periphery, was inserted. The applied force and cup acceleration were measured during insertion and used to calculate an effective mass of the cup, insertion device, and pelvis during each impact. Periacetabular strains increased variably during cup seating. After the cups were seated, strains continued to increase with postseating impacts. The effective mass remained constant throughout the test, indicating that cup seating is not associated with a change in acceleration. This finding implies that an accurate assessment of cup seating cannot be inferred by surgeon proprioception during impaction, and use of an apical hole in the cup is necessary to determine when the cup has seated.

  12. Apical domain polarization localizes actin-myosin activity to drive ratchet-like apical constriction.

    Science.gov (United States)

    Mason, Frank M; Tworoger, Michael; Martin, Adam C

    2013-08-01

    Apical constriction promotes epithelia folding, which changes tissue architecture. During Drosophila gastrulation, mesoderm cells exhibit repeated contractile pulses that are stabilized such that cells apically constrict like a ratchet. The transcription factor Twist is required to stabilize cell shape. However, it is unknown how Twist spatially coordinates downstream signals to prevent cell relaxation. We find that during constriction, Rho-associated kinase (Rok) is polarized to the middle of the apical domain (medioapical cortex), separate from adherens junctions. Rok recruits or stabilizes medioapical myosin II (Myo-II), which contracts dynamic medioapical actin cables. The formin Diaphanous mediates apical actin assembly to suppress medioapical E-cadherin localization and form stable connections between the medioapical contractile network and adherens junctions. Twist is not required for apical Rok recruitment, but instead polarizes Rok medioapically. Therefore, Twist establishes radial cell polarity of Rok/Myo-II and E-cadherin and promotes medioapical actin assembly in mesoderm cells to stabilize cell shape fluctuations.

  13. Three-Cup Chicken

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Ingredents:500 grams chicken legs,100 grams(about one tea cup)rice wine,50 grams(a small tea cup)sesame oil,50grams refined soy sauce,25 grams white sugar,10grams oyster sauce,chopped scallions,ginger root,garlic,and some hot chili peppers

  14. Rotary cup slurry atomization

    Science.gov (United States)

    Sommer, H. T.; Marnicio, R. J.

    1983-06-01

    The theory of a two-phase flow in a rotating cup atomizer is described. The analysis considers the separation of the solid and liquid media thus realistically modeling the flow of two layers along the inner cup wall: a slurry of increasing solids concentration and a supernatent liquid layer. The analysis is based on the earlier work of Hinze and Milborn (1950) which addressed the flow within a rotary cup for a homogeneous liquid. The superimposition of a settling velocity under conditions of high centrifugal acceleration permits the extended analysis of the separation of the two phases. Appropriate boundary conditions have been applied to the film's free surface and the cup wall and to match the flow characteristics at the liquid-slurry interface. The changing slurry viscosity, increasing nonlinearly with growing solid loading, was also considered. A parameter study illustrates the potential for a cup design to provide optimal slurry and liquid film thicknesses for effective atomization.

  15. Brazil World Cup Challenges

    Directory of Open Access Journals (Sweden)

    MANSUR, R.

    2012-12-01

    Full Text Available Overcoming the productivity challenge is the main benefit of the 2014 World Cup for Brazilian people. The sustainable development of our cultural tourism industry will catapult the new middle class growing up rate.

  16. Brazil World Cup Challenges

    OpenAIRE

    MANSUR, R.

    2012-01-01

    Overcoming the productivity challenge is the main benefit of the 2014 World Cup for Brazilian people. The sustainable development of our cultural tourism industry will catapult the new middle class growing up rate.

  17. Miniature modified Faraday cup for micro electron beams

    Science.gov (United States)

    Teruya, Alan T.; Elmer, John W.; Palmer, Todd A.; Walton, Chris C.

    2008-05-27

    A micro beam Faraday cup assembly includes a refractory metal layer with an odd number of thin, radially positioned traces in this refractory metal layer. Some of the radially positioned traces are located at the edge of the micro modified Faraday cup body and some of the radially positioned traces are located in the central portion of the micro modified Faraday cup body. Each set of traces is connected to a separate data acquisition channel to form multiple independent diagnostic networks. The data obtained from the two diagnostic networks are combined and inputted into a computed tomography algorithm to reconstruct the beam shape, size, and power density distribution.

  18. Complementary Coffee Cups

    Science.gov (United States)

    Banchoff, Thomas

    2006-01-01

    What may have been the birth of a new calculus problem took place when the author noticed that two coffee cups, one convex and one concave, fit nicely together, and he wondered which held more coffee. The fact that their volumes were about equal led to the topic of this article: complementary surfaces of revolution with equal volumes.

  19. Compact rotating cup anemometer

    Science.gov (United States)

    Wellman, J. B.

    1968-01-01

    Compact, collapsible rotating cup anemometer is used in remote locations where portability and durability are factors in the choice of equipment. This lightweight instrument has a low wind-velocity threshold, is capable of withstanding large mechanical shocks while in its stowed configuration, and has fast response to wind fluctuations.

  20. The perennial cup anemometer

    Science.gov (United States)

    Kristensen, L.

    1999-01-01

    A short version of the history of the cup anemometer precedes a more technical discussion of the special features of this instrument. These include its extremely linear calibration and the non-linearity of its response to wind speed changes. A simple conceptual model by Schrenk is used to demonstrate this and to explain why the cup anemometer is able to start from a zero rotation rate at zero wind to one corresponding to a sudden change in the ambient wind speed to a finite value. The same model is used to show that the cup anemometer should be characterized by a distance constant rather than by a time constant. The bias in the measured mean wind speed due to the random variations in the three velocity components is discussed in terms of standard, semiquantitative turbulence models, and the main thesis is that this bias is overwhelmingly dominated by the fluctuations of the lateral wind velocity component, i.e. the wind component perpendicular to the mean wind direction, and not, as is often assumed, by the longitudinal wind velocity component. It is shown theoretically and tested experimentally that the bias due to lateral wind velocity fluctuations can be significantly reduced by means of a special data processing of the simultaneous signals from a cup anemometer and a wind vane. This means that, with care, the overall overspeeding can be reduced to less than 1%.

  1. Modified Faraday cup

    Science.gov (United States)

    Elmer, John W.; Teruya, Alan T.; O'Brien, Dennis W.

    1996-01-01

    A tomographic technique for measuring the current density distribution in electron beams using electron beam profile data acquired from a modified Faraday cup to create an image of the current density in high and low power beams. The modified Faraday cup includes a narrow slit and is rotated by a stepper motor and can be moved in the x, y and z directions. The beam is swept across the slit perpendicular thereto and controlled by deflection coils, and the slit rotated such that waveforms are taken every few degrees form 0.degree. to 360.degree. and the waveforms are recorded by a digitizing storage oscilloscope. Two-din-tensional and three-dimensional images of the current density distribution in the beam can be reconstructed by computer tomography from this information, providing quantitative information about the beam focus and alignment.

  2. Left ventricular apical diseases.

    Science.gov (United States)

    Cisneros, Silvia; Duarte, Ricardo; Fernandez-Perez, Gabriel C; Castellon, Daniel; Calatayud, Julia; Lecumberri, Iñigo; Larrazabal, Eneritz; Ruiz, Berta Irene

    2011-08-01

    There are many disorders that may involve the left ventricular (LV) apex; however, they are sometimes difficult to differentiate. In this setting cardiac imaging methods can provide the clue to obtaining the diagnosis. The purpose of this review is to illustrate the spectrum of diseases that most frequently affect the apex of the LV including Tako-Tsubo cardiomyopathy, LV aneurysms and pseudoaneurysms, apical diverticula, apical ventricular remodelling, apical hypertrophic cardiomyopathy, LV non-compaction, arrhythmogenic right ventricular dysplasia with LV involvement and LV false tendons, with an emphasis on the diagnostic criteria and imaging features. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s13244-011-0091-6) contains supplementary material, which is available to authorized users.

  3. Field calibration of cup anemometers

    DEFF Research Database (Denmark)

    Schmidt Paulsen, Uwe; Mortensen, Niels Gylling; Hansen, Jens Carsten

    2007-01-01

    A field calibration method and results are described along with the experience gained with the method. The cup anemometers to be calibrated are mounted in a row on a 10-m high rig and calibrated in the free wind against a reference cup anemometer. The method has been reported [1] to improve...... the statistical bias on the data relative to calibrations carried out in a wind tunnel. The methodology is sufficiently accurate for calibration of cup anemometers used for wind resource assessments and provides a simple, reliable and cost-effective solution to cup anemometer calibration, especially suited...

  4. World Cup television

    OpenAIRE

    2012-01-01

    In the last year of the first decade of the 21st century, in the verge of breaking into the era of digital television, it is important to know what kind of television model is available in Portugal. The analysis of the news coverage of the FIFA 2010 World Cup will certainly help in finding the answers. In this article, we present a study that centers its focus on news formats related to this great media event, broadcasted in both generalist as well as cable news networks between the 11th of J...

  5. Double Cups with Phoenix

    Institute of Scientific and Technical Information of China (English)

    1994-01-01

    THIS cup, unearthed at the site of an aristocrat’s tomb (No. 2 Baoshan Tomb) of the Chu State, was a vessel used during weddings in ancient times. According to the earliest account of the vessel, found in the book Liji, a new couple would use it to gargle together, which meant that they would be of one heart and one mind, and that they would love and take care of each other. Shaped like a standing phoenix, the vessel is 17.6 cm. long. The phoenix holds a pearl in its beak and its wings are spread

  6. Cup Cylindrical Waveguide Antenna

    Science.gov (United States)

    Acosta, Roberto J.; Darby, William G.; Kory, Carol L.; Lambert, Kevin M.; Breen, Daniel P.

    2008-01-01

    The cup cylindrical waveguide antenna (CCWA) is a short backfire microwave antenna capable of simultaneously supporting the transmission or reception of two distinct signals having opposite circular polarizations. Short backfire antennas are widely used in mobile/satellite communications, tracking, telemetry, and wireless local area networks because of their compactness and excellent radiation characteristics. A typical prior short backfire antenna contains a half-wavelength dipole excitation element for linear polarization or crossed half-wavelength dipole elements for circular polarization. In order to achieve simultaneous dual circular polarization, it would be necessary to integrate, into the antenna feed structure, a network of hybrid components, which would introduce significant losses. The CCWA embodies an alternate approach that entails relatively low losses and affords the additional advantage of compactness. The CCWA includes a circular cylindrical cup, a circular disk subreflector, and a circular waveguide that serves as the excitation element. The components that make it possible to obtain simultaneous dual circular polarization are integrated into the circular waveguide. These components are a sixpost polarizer and an orthomode transducer (OMT) with two orthogonal coaxial ports. The overall length of the OMT and polarizer (for the nominal middle design frequency of 2.25 GHz) is about 11 in. (approximately equal to 28 cm), whereas the length of a commercially available OMT and polarizer for the same frequency is about 32 in. (approximately equal to 81 cm).

  7. Alternative medicine: an update on cupping therapy.

    Science.gov (United States)

    Chen, B; Li, M-Y; Liu, P-D; Guo, Y; Chen, Z-L

    2015-07-01

    To know the research progress of cupping therapy all over the world, the authors analyze the research of cupping therapy in recent 5 years. It indicates that cupping therapy can be applied to extensive curable disease, but has poor clinical evidence. Some improvements in the mechanism research of cupping therapy have been made, but it needs further research. The adverse events of cupping therapy attract attention. The standardization of cupping therapy has emerged.

  8. [Apical endodontic surgery].

    Science.gov (United States)

    Lindeboom, J A

    2004-04-01

    If (a revision of) a conventional endodontic treatment is not possible or not successful, apical endodontic surgery can be indicated. The contemporary indications, the better retrograde preparation techniques with ultrasonic retro-tips, and the better visualisation of the operation area with an operation microscope can lead to higher success percentages. Moreover, the current developments in the field of compatible filling materials are promising. Also the application of lasers is promising, but has still to prove its clinical usefulness.

  9. Cup Anemometer Overspeeding

    DEFF Research Database (Denmark)

    Busch, N. E.; Kristensen, Leif

    1976-01-01

    Statistical considerations are applied to a general equation of motion for cup anemometers in a turbulent wind. It is shown that the relative overspeeding ΔS/S can be expressed as ΔS/S = Ih2 · Js(l0/Λs) + cIw2, where Is and Iw are the horizontal and the vertical turbulence intensifies, respectively....... The function Js depends on the shape of the spectrum of horizontal turbulent energy, l0 is the distance constant for the anemometer, and Λs is a characteristic length scale of the horizontal turbulence. The constant c is of order unity. If Λs is suitably chosen as the scale of the energy-containing eddies...

  10. Optic atrophy and glaucomatous cupping.

    Science.gov (United States)

    Radius, R L; Maumenee, A E

    1978-02-01

    We reviewed 170 eyes of 112 patients with optic atrophy from various causes. Special attention was directed towards measured cup:disk ratios as well as presence of glaucomatous-like cupping of the optic nerve head. We observed a small but significant increase in nerve head cupping in eyes with optic atrophy when compared to contralateral eyes, as well as to eyes of 50 diabetic patients. No characteristic glaucomatous disk changes were documented. We evaluated these findings with respect to possible causes of glaucomatous disk and field changes.

  11. Abceso apical agudo

    OpenAIRE

    Jara Ortiz, M.; López, M.; Gómez Viglino, L.; Maydana, N.; Hervit, M.; Bertola, N.

    2015-01-01

    En casos de urgencia, muchas veces debemos poner a prueba distintos elementos de diagnóstico para encontrar la mejor respuesta posible. En este caso se reporta un absceso apical agudo en la zona palatina del sector 1, que, de acuerdo al test de vitalidad pulpar y correcta interpretación radiográfica se localiza la pieza causal N° 1.8.Asistió a la consulta un paciente masculino 30 años de edad, dolor a la masticación, edema y tumefacción, en zona palatina comprendida en piezas 1.5; 1.6; 1.7 y ...

  12. On cup anemometer rotor aerodynamics.

    Science.gov (United States)

    Pindado, Santiago; Pérez, Javier; Avila-Sanchez, Sergio

    2012-01-01

    The influence of anemometer rotor shape parameters, such as the cups' front area or their center rotation radius on the anemometer's performance was analyzed. This analysis was based on calibrations performed on two different anemometers (one based on magnet system output signal, and the other one based on an opto-electronic system output signal), tested with 21 different rotors. The results were compared to the ones resulting from classical analytical models. The results clearly showed a linear dependency of both calibration constants, the slope and the offset, on the cups' center rotation radius, the influence of the front area of the cups also being observed. The analytical model of Kondo et al. was proved to be accurate if it is based on precise data related to the aerodynamic behavior of a rotor's cup.

  13. Two cases of apical ballooning syndrome masking apical hypertrophic cardiomyopathy.

    Science.gov (United States)

    Roy, Ranjini Raina; Hakim, Fayaz A; Hurst, R Todd; Simper, David; Appleton, Christopher P

    2014-04-01

    Apical akinesis and dilation in the absence of obstructive coronary artery disease is a typical feature of stress-induced (takotsubo) cardiomyopathy, whereas apical hypertrophy is seen in apical-variant hypertrophic cardiomyopathy. We report the cases of 2 patients who presented with takotsubo cardiomyopathy and were subsequently found to have apical-variant hypertrophic cardiomyopathy, after the apical ballooning from the takotsubo cardiomyopathy had resolved. The first patient, a 43-year-old woman with a history of alcohol abuse, presented with shortness of breath, electrocardiographic and echocardiographic features consistent with takotsubo cardiomyopathy, and no significant coronary artery disease. An echocardiogram 2 weeks later revealed a normal left ventricular ejection fraction and newly apparent apical hypertrophy. The 2nd patient, a 70-year-old woman with pancreatitis, presented with chest pain, apical akinesis, and a left ventricular ejection fraction of 0.39, consistent with takotsubo cardiomyopathy. One month later, her left ventricular ejection fraction was normal; however, hypertrophy of the left ventricular apex was newly noted. To our knowledge, these are the first reported cases in which apical-variant hypertrophic cardiomyopathy was masked by apical ballooning from stress-induced cardiomyopathy.

  14. Aerodynamic characteristics of anemometer cups

    Science.gov (United States)

    Brevoort, M J; Joyner, U T

    1934-01-01

    The static lift and drag forces on three hemispherical and two conical cups were measured over a range of angles of attack from 0 degrees to 180 degrees and a range of Reynolds Numbers from very small up to 400,000. The problems of supporting the cup for measurement and the effect of turbulence were also studied. The results were compared with those of other investigators.

  15. Spoon-to-Cup Fading as Treatment for Cup Drinking in a Child with Intestinal Failure

    Science.gov (United States)

    Groff, Rebecca A.; Piazza, Cathleen C.; Zeleny, Jason R.; Dempsey, Jack R.

    2011-01-01

    We treated a child with intestinal failure who consumed solids on a spoon but not liquids from a cup. We used spoon-to-cup fading, which consisted of taping a spoon to a cup and then gradually moving the bowl of the spoon closer to the edge of the cup. Spoon-to-cup fading was effective for increasing consumption of liquids from a cup. (Contains 2…

  16. Can A Cup Anemometer `Underspeed'?

    Science.gov (United States)

    Kristensen, L.

    An analysis of cup-anemometer dynamics has been carried out inorder to determine whether the mean-wind velocity can have anegative bias. This would be contrary to the general belief thatcup anemometers always overspeed. Compared to prior analyses, theeffect of a possible nonlinearity of the calibration function isincluded. The conclusion is that neither longitudinal nor lateralvelocity fluctuations can contribute significantly to a negativebias. However, if a cup anemometer has an angular response thatfalls below the ideal cosine response, there will, as demonstratedin the concluding discussion, be a negative contribution from thevertical velocity fluctuations to the total bias, and thiscontribution may even outbalance the positive contributions fromthe longitudinal velocity fluctuations. Concrete evidence of suchexotic cup anemometer behaviour has not been reported in theliterature.

  17. Immunolocalization of FGF8/10 in the Apical Epidermal Peg and Blastema of the regenerating tail in lizard marks this apical growing area.

    Science.gov (United States)

    Alibardi, Lorenzo

    2016-07-01

    Previous studies have shown that Fibroblast Growth Factors are present in the regenerating tail tissues of lizards where they may stimulate the process of regeneration. The present study is focused on the immunolocalization of FGF8 and FGF10 in the regenerating lizard tail, two signaling proteins of the apical epidermal cup/ridge and mesenchymal blastema sustaining tail and limb regeneration in amphibians and the development of the tail and limbs in vertebrate embryos. Main immunoreactive protein bands at 15-18kDa for FGF8/10 are detected in the regenerating epidermis and only a band at 30 or 35kDa in the underlying connective tissues. FGF8 appears particularly localized in cells and nuclei of the apical epidermal peg and of the ependymal ampulla present at the tip of the regenerating tail. FGF10 is also immuno-localized in the apical epidermis but is particularly intensely localized in the mesenchyme of the apical blastema. In accordance with previous studies, the present observations supports the hypothesis that the apical epidermal peg and the ependymal tube with the few regenerated neurons present within it, release FGF8/10 that may contribute to maintenance of cell proliferation in the apical front of the mesenchyme for the growth of the regenerating tail.

  18. Aerodynamic Investigation of a Cup Anemometer

    Science.gov (United States)

    Hubbard, John D; Brescoll, George P

    1934-01-01

    This thesis presents the results of an investigation wherein the change of the normal force coefficient with Reynolds Number was obtained statically for a 15.5-centimeter hemisphere cup under the following conditions: (1) single cup with no interference; (2) single cup with three-cup interference; (3) four cups. The coefficients found in this research vary with Reynolds Number and are high as compared with those of Eiffel. The effect of interference upon a single cup is to increase the drag and normal force coefficients. The curve resulting from the summation of the coefficients for four cups agrees with the static torque curve of a Robinson type cup anemometer. All tests were carried on in the University of Detroit atmospheric wind tunnel during May 1933.

  19. Cup tool use by squirrel monkeys.

    Science.gov (United States)

    Buckmaster, Christine L; Hyde, Shellie A; Parker, Karen J; Lyons, David M

    2015-12-01

    Captive-born male and female squirrel monkeys spontaneously 'invented' a cup tool use technique to Contain (i.e., hold and control) food they reduced into fragments for consumption and to Contain water collected from a valve to drink. Food cup use was observed more frequently than water cup use. Observations indicate that 68% (n = 39/57) of monkeys in this population used a cup (a plastic slip cap) to Contain food, and a subset of these monkeys, 10% (n = 4/39), also used a cup to Contain water. Cup use was optional and did not replace, but supplemented, the hand/arm-to-mouth eating and direct valve drinking exhibited by all members of the population. Strategies monkeys used to bring food and cups together for food processing activity at preferred upper-level perching areas, in the arboreal-like environment in which they lived, provides evidence that monkeys may plan food processing activity with the cups. Specifically, prior to cup use monkeys obtained a cup first before food, or obtained food and a cup from the floor simultaneously, before transporting both items to upper-level perching areas. After food processing activity with cups monkeys rarely dropped the cups and more often placed the cups onto perching. Monkeys subsequently returned to use cups that they previously placed on perching after food processing activity. The latter behavior is consistent with the possibility that monkeys may keep cups at preferred perching sites for future food processing activity and merits experimental investigation. Reports of spontaneous tool use by squirrel monkeys are rare and this is the first report of population-level tool use. These findings offer insights into the cognitive abilities of squirrel monkeys and provide a new context for behavior studies with this genus and for comparative studies with other primates.

  20. 21 CFR 884.5400 - Menstrual cup.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Menstrual cup. 884.5400 Section 884.5400 Food and... OBSTETRICAL AND GYNECOLOGICAL DEVICES Obstetrical and Gynecological Therapeutic Devices § 884.5400 Menstrual cup. (a) Identification. A menstrual cup is a receptacle placed in the vagina to collect...

  1. Colgajo de reposición apical Apically positioned flap

    Directory of Open Access Journals (Sweden)

    L. Pérez-Salcedo

    2011-08-01

    Full Text Available Se describe la técnica del colgajo de reposición apical desde el primer autor, Nabers en 1954, así como las modificaciones realizadas por Ariaudo y Tyrrel en 1957 y Friedman en 1962. También se presenta un caso clínico donde se describen los diferentes pasos de la cirugía de reposición apical. Por último, se hace una revisión evaluando la eficacia del colgajo de reposición apical en el tratamiento de la periodontitis.This paper describes the technique apically positioned flap since the first author Nabers in 1954 and also the modifications performed by Ariaudo and Tyrrell in 1957 and Friedman in 1962. Also a clinical case is presented where it can be observed the different steps of the apically positioned flap in clinical pictures. Afterwards some papers in which the efficacy of the apically positioned flap in the treatment of periodontitis are evaluated and described.

  2. Coffee Cup Atomic Force Microscopy

    Science.gov (United States)

    Ashkenaz, David E.; Hall, W. Paige; Haynes, Christy L.; Hicks, Erin M.; McFarland, Adam D.; Sherry, Leif J.; Stuart, Douglas A.; Wheeler, Korin E.; Yonzon, Chanda R.; Zhao, Jing; Godwin, Hilary A.; Van Duyne, Richard P.

    2010-01-01

    In this activity, students use a model created from a coffee cup or cardstock cutout to explore the working principle of an atomic force microscope (AFM). Students manipulate a model of an AFM, using it to examine various objects to retrieve topographic data and then graph and interpret results. The students observe that movement of the AFM…

  3. Coffee Cup Atomic Force Microscopy

    Science.gov (United States)

    Ashkenaz, David E.; Hall, W. Paige; Haynes, Christy L.; Hicks, Erin M.; McFarland, Adam D.; Sherry, Leif J.; Stuart, Douglas A.; Wheeler, Korin E.; Yonzon, Chanda R.; Zhao, Jing; Godwin, Hilary A.; Van Duyne, Richard P.

    2010-01-01

    In this activity, students use a model created from a coffee cup or cardstock cutout to explore the working principle of an atomic force microscope (AFM). Students manipulate a model of an AFM, using it to examine various objects to retrieve topographic data and then graph and interpret results. The students observe that movement of the AFM…

  4. On Cup Anemometer Rotor Aerodynamics

    Directory of Open Access Journals (Sweden)

    Santiago Pindado

    2012-05-01

    Full Text Available The influence of anemometer rotor shape parameters, such as the cups’ front area or their center rotation radius on the anemometer’s performance was analyzed. This analysis was based on calibrations performed on two different anemometers (one based on magnet system output signal, and the other one based on an opto-electronic system output signal, tested with 21 different rotors. The results were compared to the ones resulting from classical analytical models. The results clearly showed a linear dependency of both calibration constants, the slope and the offset, on the cups’ center rotation radius, the influence of the front area of the cups also being observed. The analytical model of Kondo et al. was proved to be accurate if it is based on precise data related to the aerodynamic behavior of a rotor’s cup.

  5. Experimental Investigation of the Robinson-Type Cup Anemometer

    Science.gov (United States)

    Brevoort, M J; Joyner, U T

    1936-01-01

    This report presents the results of wind tunnel tests on a Robinson-type anemometer. The investigation covered force measurements on individual cups, as well as static and dynamic torque measurements and calibrations on complete cup wheels. In the tests on individual cups 5 cup forms were used and in the measurements on complete cup wheels 4 cup wheels with 3 arm lengths for each cup wheel were tested. All the results are presented in graphical form.

  6. Fourier analysis of the aerodynamic behavior of cup anemometers

    OpenAIRE

    Pindado Carrion, Santiago; Pérez Sarasola, Imanol; Aguado Roca, Maite

    2013-01-01

    The calibration results (the transfer function) of an anemometer equipped with several cup rotors were analyzed and correlated with the aerodynamic forces measured on the isolated cups in a wind tunnel. The correlation was based on a Fourier analysis of the normal-to-the-cup aerodynamic force. Three different cup shapes were studied: typical conical cups, elliptical cups and porous cups (conical-truncated shape). Results indicated a good correlation between the anemometer factor, K, and the r...

  7. Factitious panniculitis induced by cupping therapy.

    Science.gov (United States)

    Moon, Suk-Ho; Han, Hyun-Ho; Rhie, Jong-Won

    2011-11-01

    Cupping therapy is an alternative medical procedure that has been widely performed in Asian countries to relieve pain. It is known that there is no complication to this therapy, so many non-health care professionals have performed this procedure. However, there have been few reports on complications, such as iron deficiency anemia, hemorrhagic bullae, kelloids, vasovagal syncope, and foreign body reactions. Masses associated with panniculitis induced by cupping are extremely rare, and they require a unique approach.A 56-year-old woman presented with a 10-month history of multiple masses in the posterior neck and right shoulder areas. The patient repeatedly attempted cupping therapy by herself, and multiple palpable masses developed in the posterior neck and right shoulder area where cupping therapy had been performed. The masses were enlarged by repeated cupping, and they decreased in size when cupping was stopped. Among all lesions, the 2 masses with tenderness were surgically excised. The remaining masses resolved after cupping therapy was ceased. When a patient with subcutaneous mass has a history of cupping or trace of cupping marks, panniculitis induced by cupping should be suspected. The lesion seems to spontaneously resolve unless they are repeatedly stimulated. However, surgical resection is considered in patients with infections or severe tenderness as a complication.

  8. Cupping for hypertension: a systematic review.

    Science.gov (United States)

    Lee, Myeong Soo; Choi, Tae-Young; Shin, Byung-Cheul; Kim, Jong-In; Nam, Sang-Soo

    2010-01-01

    The objective of this review is to assess the clinical evidence for or against cupping as a treatment for hypertension. We searched the literature using 15 databases from their inception to 30 June 2009, without language restrictions. We included all clinical trials (CTs) of cupping to treat hypertension in human patients. Risk of bias was assessed using the Cochrane criteria. Two CTs met all inclusion criteria. One RCT (randomized CT) assessed the effectiveness of dry cupping on changes in cerebral vascular function compared with drug therapy. Their results suggested significant effect in favor of cupping on vascular compliance and degree of vascular filling. One uncontrolled observational study (UOS) tested wet cupping for acute hypertension and found that a one-time treatment reduced blood pressure. In conclusion, the evidence is not significantly convincing to suggest cupping is effective for treating hypertension. Further research is required to investigate whether it generates any specific effects for that condition.

  9. Field calibration of cup anemometers

    DEFF Research Database (Denmark)

    Kristensen, L.; Jensen, G.; Hansen, A.

    2001-01-01

    An outdoor calibration facility for cup anemometers, where the signals from 10 anemometers of which at least one is a reference can be can be recorded simultaneously, has been established. The results are discussed with special emphasis on the statisticalsignificance of the calibration expressions....... It is concluded that the method has the advantage that many anemometers can be calibrated accurately with a minimum of work and cost. The obvious disadvantage is that the calibration of a set of anemometersmay take more than one month in order to have wind speeds covering a sufficiently large magnitude range...

  10. Bone remodeling around cementless tantalum cups

    NARCIS (Netherlands)

    Grillo, J. -C.; Flecher, X.; Bouvenot, J.; Argenson, J. -N.

    2008-01-01

    Purpose of the study.-Most studies have reported a significant decrease in periacetabular bone stock one year after implantation of a cementless cup. The purpose of this work was to study the bone-implant interface of the tantalum cup using plain X-rays and dual-energy X-ray absorptiometry (DEXA). M

  11. Soccer jersey sponsors and the world cup

    NARCIS (Netherlands)

    Groot, L.F.M.; Ferwerda, J.

    2014-01-01

    The market for soccer jerseys is a multibillion market dominated by Adidas, Nike and Puma. This paper investigates whether jersey sponsorship has a non-arbitrary effect on the outcomes of World Cup knockout matches. The results show that in the knockout stages of the last four World Cup tournaments,

  12. Fourier analysis of the aerodynamic behavior of cup anemometers

    Science.gov (United States)

    Pindado, Santiago; Pérez, Imanol; Aguado, Maite

    2013-06-01

    The calibration results (the transfer function) of an anemometer equipped with several cup rotors were analyzed and correlated with the aerodynamic forces measured on the isolated cups in a wind tunnel. The correlation was based on a Fourier analysis of the normal-to-the-cup aerodynamic force. Three different cup shapes were studied: typical conical cups, elliptical cups and porous cups (conical-truncated shape). Results indicated a good correlation between the anemometer factor, K, and the ratio between the first two coefficients in the Fourier series decomposition of the normal-to-the-cup aerodynamic force.

  13. Vacuum extraction: a randomized controlled comparison of the New Generation cup with the original Bird cup.

    Science.gov (United States)

    Carmody, F; Grant, A; Somchiwong, M

    1986-01-01

    A new design of vacuum extractor cup--'the New Generation cup'--has recently been introduced into clinical practice. Its major modification is a traction cord which passes around the rim of the cup for 180 degrees and is free to slide within the rim. Claims that this design 'enables the operator to pull obliquely without causing the cup to tilt' and thereby 'reduces failure rates, reduces the incidence of scalp trauma and increases operator confidence' have been evaluated in a randomized controlled trial. 123 women with singleton pregnancies of 37 completed weeks or more, with a cephalic presentation and for whom a decision to deliver by vacuum extraction had been taken, were randomly allocated to the 'New Generation' cup or BIRD's original vacuum extractor cup; 50 mm anterior and posterior cups were used in both groups as appropriate. The two groups were comparable at entry and delivered by obstetricians of similar status. The two types of cup were similar in respect of number of failures to deliver with the vacuum extractor, correct positioning of the cup, number of pulls required for delivery and time taken to expedite delivery. Cup detachments occurred in nine cases allocated to the 'New Generation' cup compared with four allocated to the original BIRD cup. The babies in the two groups were in similar condition at birth and sustained similar amounts of scalp trauma. Neonatal jaundice, both clinical and biochemical, was more common in babies delivered with the 'New Generation cup' and this was reflected in greater use of phototherapy in this group. Operators were equally divided in their preference of cup.(ABSTRACT TRUNCATED AT 250 WORDS)

  14. Function of root apical meristem

    OpenAIRE

    Benešová, Šárka

    2013-01-01

    A root apical meristem is the only source of cells for all tissues in the root. The root growth relies on its function. Regulation of a cell division frequency and cell differentiation affects organization and function of the differentiated tissues and the proper meristem function. If the cell differentiation overbalances the cell proliferation, the meristem exhaustion occurs and the root growth irreversibly terminates. This thesis describes existing knowledge about regulation of the primary ...

  15. Field calibration of cup anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, L.; Jensen, G.; Hansen, A.; Kirkegaard, P.

    2001-01-01

    An outdoor calibration facility for cup anemometers, where the signals from 10 anemometers of which at least one is a reference can be recorded simultaneously, has been established. The results are discussed with special emphasis on the statistical significance of the calibration expressions. It is concluded that the method has the advantage that many anemometers can be calibrated accurately with a minimum of work and cost. The obvious disadvantage is that the calibration of a set of anemometers may take more than one month in order to have wind speeds covering a sufficiently large magnitude range in a wind direction sector where we can be sure that the instruments are exposed to identical, simultaneous wind flows. Another main conclusion is that statistical uncertainty must be carefully evaluated since the individual 10 minute wind-speed averages are not statistically independent. (au)

  16. Does Cupping = Success for Olympic Athletes?

    Science.gov (United States)

    ... news/fullstory_160301.html Does 'Cupping' = Success for Olympic Athletes? Telltale red circles of ancient Chinese practice ... Eyebrows raised in Rio over the weekend when Olympic athletes like swimmer Michael Phelps started showing up ...

  17. Clear plastic cups: a childhood choking hazard.

    Science.gov (United States)

    Weiss, R L; Goldstein, M N; Dharia, A; Zahtz, G; Abramson, A L; Patel, M

    1996-11-01

    The disposable plastic beverage cup is not usually regarded as hazardous to young children. Certain varieties of these products however, are manufactured from a brittle, clear plastic that easily cracks and fragments. While most conscientious parents keep their children safe from peanuts, balloons, and other known choking hazards, a child can surreptitiously bite a cup edge and aspirate the fragment. We report two cases of foreign body aspiration involving clear plastic cups that went undetected one of which remained 21 months following a negative rigid bronchoscopy. Diagnostic difficulties are related to the transparency and radiolucency of these objects. When suspicious of foreign body aspiration in children, otolaryngologists should inquire about the availability of clear plastic cups in the household and be mindful of the diagnostic pitfalls. Further investigations including CT scanning and repeat bronchoscopy may be helpful in cases of suspected missed foreign bodies. An educational campaign aimed at prevention and placement of product package warning labels should be established.

  18. [Study on the mechanisms of cupping therapy].

    Science.gov (United States)

    Hong, Shou-Hai; Wu, Fei; Lu, Xuan; Cai, Qing; Guo, Yi

    2011-10-01

    Computerized literature searches are performed for articles of the mechanism of cupping therapy in the past 10 years. The mechanism of action of local negative pressure applied to human body is studied in terms of specific changes in local tissue structure, stretch to the nerve and muscle, increasing blood circulation and causing autohemolysis. This paper aims to explain the mechanism of cupping therapy according to modern science.

  19. Some developments on cup anemometer aerodynamics

    OpenAIRE

    Pindado Carrion, Santiago; Cubas Cano, Javier

    2014-01-01

    In the present study the geometry of cups is experimentally studied through anemometer performance. This performance is analyzed in two different ways. On the one hand the anemometer transfer function between cases is compared. On the other hand the stationary rotation speed is decomposed into constant and harmonic terms, the comparison being established between the last ones. Results indicate that some cup shapes can improve the uniformity of anemometer rotation, this fact being important to...

  20. The apical complex provides a regulated gateway for secretion of invasion factors in Toxoplasma.

    Directory of Open Access Journals (Sweden)

    Nicholas J Katris

    2014-04-01

    Full Text Available The apical complex is the definitive cell structure of phylum Apicomplexa, and is the focus of the events of host cell penetration and the establishment of intracellular parasitism. Despite the importance of this structure, its molecular composition is relatively poorly known and few studies have experimentally tested its functions. We have characterized a novel Toxoplasma gondii protein, RNG2, that is located at the apical polar ring--the common structural element of apical complexes. During cell division, RNG2 is first recruited to centrosomes immediately after their duplication, confirming that assembly of the new apical complex commences as one of the earliest events of cell replication. RNG2 subsequently forms a ring, with the carboxy- and amino-termini anchored to the apical polar ring and mobile conoid, respectively, linking these two structures. Super-resolution microscopy resolves these two termini, and reveals that RNG2 orientation flips during invasion when the conoid is extruded. Inducible knockdown of RNG2 strongly inhibits host cell invasion. Consistent with this, secretion of micronemes is prevented in the absence of RNG2. This block, however, can be fully or partially overcome by exogenous stimulation of calcium or cGMP signaling pathways, respectively, implicating the apical complex directly in these signaling events. RNG2 demonstrates for the first time a role for the apical complex in controlling secretion of invasion factors in this important group of parasites.

  1. Distance constant of the Risoe cup anemometer

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, L.; Frost Hansen, O.

    2002-04-01

    The theory for cup-anemometer dynamics is presented in some detail and two methods of obtaining the distance constant . are discussed. The first method is based on wind tunnel measurements: with a constant wind speed the cup anemometer is released from a locked position of the rotor and the increasing rotation rate recorded. It is concluded that the rapid increase in rotation rate makes the method very inaccurate. The second method consists of an analysis of turbulent, atmospheric of wind speed as measured by the cup anemometer and a fast-responding sonic anemometer with a spatial eddy resolution which is significantly better than that which can be obtained by a cup anemometer. The ratio between the measured power spectra of the horizontal wind speed by the two instruments contains the necessary information for determining the response characteristics of the cup anemometer and thereby .. The conditions for this last method to be accurate are discussed. Field measurements are used to demonstrate how . is determined the Riso cup anemometer, model P2546.

  2. ACCUWIND - Methods for classification of cup anemometers

    DEFF Research Database (Denmark)

    Dahlberg, J.-Å.; Friis Pedersen, Troels; Busche, P.

    2006-01-01

    Errors associated with the measurement of wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show significant and not acceptable difference. The EuropeanCLASSCUP project posed the objectives to quantify...... the errors associated with the use of cup anemometers, and to develop a classification system for quantification of systematic errors of cup anemometers. This classification system has now been implementedin the IEC 61400-12-1 standard on power performance measurements in annex I and J. The classification...... of cup anemometers requires general external climatic operational ranges to be applied for the analysis of systematic errors. A Class A categoryclassification is connected to reasonably flat sites, and another Class B category is connected to complex terrain, General classification indices are the result...

  3. An updated review of the efficacy of cupping therapy.

    Directory of Open Access Journals (Sweden)

    Huijuan Cao

    Full Text Available BACKGROUND: Since 1950, traditional Chinese medicine (TCM cupping therapy has been applied as a formal modality in hospitals throughout China and elsewhere in the world. Based on a previous systematic literature review of clinical studies on cupping therapy, this study presents a thorough review of randomized controlled trials (RCTs to evaluate the therapeutic effect of cupping therapy. METHOD: Six databases were searched for articles published through 2010. RCTs on cupping therapy for various diseases were included. Studies on cupping therapy combined with other TCM treatments versus non-TCM therapies were excluded. RESULTS: 135 RCTs published from 1992 through 2010 were identified. The studies were generally of low methodological quality. Diseases for which cupping therapy was commonly applied were herpes zoster, facial paralysis (Bell palsy, cough and dyspnea, acne, lumbar disc herniation, and cervical spondylosis. Wet cupping was used in most trials, followed by retained cupping, moving cupping, and flash cupping. Meta-analysis showed cupping therapy combined with other TCM treatments was significantly superior to other treatments alone in increasing the number of cured patients with herpes zoster, facial paralysis, acne, and cervical spondylosis. No serious adverse effects were reported in the trials. CONCLUSIONS: Numerous RCTs on cupping therapy have been conducted and published during the past decades. This review showed that cupping has potential effect in the treatment of herpes zoster and other specific conditions. However, further rigorously designed trials on its use for other conditions are warranted.

  4. World Cup:Brands Gamble Began

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As I click the first word on board,eight days,17 hours and one minute later,the 2010 FIFA World Cup South AfricaTM would star t its month-long competition.Who would like to be awarded the World Cup Trophy at last has already aroused the enthusiasm of the whole world.Furthermore,the worldwide famous sports brands also have launched their adventure to bet which team they sponsored would be at the top of the competition.One month later,we could know who will win eventually.

  5. Football business models: Why did Germany win the World Cup?

    DEFF Research Database (Denmark)

    Cortsen, Kenneth

    2016-01-01

    This article looks into the managerial aspects related to why and how Germany won the 2014 FIFA World Cup.......This article looks into the managerial aspects related to why and how Germany won the 2014 FIFA World Cup....

  6. Green goal: Awareness of the 2010 FIFA World Cup's greening ...

    African Journals Online (AJOL)

    ... Cup's greening programmes and implications for environmental education. ... the Department of Environmental Affairs and Tourism (DEAT) embarked on the ... their perceptions of the environmental impacts of the 2010 FIFA World Cup, ...

  7. Coffee to Go: Woman "Thinks" First Cup in 15 Years

    Science.gov (United States)

    ... turn Javascript on. Feature: NIBIB Robotics Coffee to Go: Woman "Thinks" First Cup in 15 Years Past ... Athlete Stands Again…On His Own! / Coffee to Go: Woman "Thinks" First Cup in 15 Years Spring ...

  8. Football business models: Why did Germany win the World Cup?

    DEFF Research Database (Denmark)

    Cortsen, Kenneth

    2014-01-01

    This article looks into the managerial aspects related to why and how Germany won the 2014 FIFA World Cup.......This article looks into the managerial aspects related to why and how Germany won the 2014 FIFA World Cup....

  9. An Updated Review of the Efficacy of Cupping Therapy

    OpenAIRE

    Huijuan Cao; Xun Li; Jianping Liu

    2012-01-01

    BACKGROUND: Since 1950, traditional Chinese medicine (TCM) cupping therapy has been applied as a formal modality in hospitals throughout China and elsewhere in the world. Based on a previous systematic literature review of clinical studies on cupping therapy, this study presents a thorough review of randomized controlled trials (RCTs) to evaluate the therapeutic effect of cupping therapy. METHOD: Six databases were searched for articles published through 2010. RCTs on cupping therapy for vari...

  10. Cup products in Hopf cyclic cohomology with coefficients in contramodules

    CERN Document Server

    Rangipour, Bahram

    2010-01-01

    We use stable anti Yetter-Drinfeld contramodules to improve the cup products in Hopf cyclic cohomology. The improvement fixes the lack of functoriality of the cup products previously defined and show that the cup products are sensitive to the coefficients.

  11. Improved analytical method to study the cup anemometer performance

    Science.gov (United States)

    Pindado, Santiago; Ramos-Cenzano, Alvaro; Cubas, Javier

    2015-10-01

    The cup anemometer rotor aerodynamics is analytically studied based on the aerodynamics of a single cup. The effect of the rotation on the aerodynamic force is included in the analytical model, together with the displacement of the aerodynamic center during one turn of the cup. The model can be fitted to the testing results, indicating the presence of both the aforementioned effects.

  12. Orienteering World Cup hosted by CERN Club

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    Elite runners took to the streets of Geneva for the last leg of the Orienteering World Cup, from 8-10 October. The Geneva finals were hosted by the CERN Orienteering Club and concluded months of competitions held across 5 countries.   Women's World-Cup winner, Simone Niggli (centre).  © Ilknur Colak The final events of the Orienteering World Cup took place in the Old Town of Geneva and Saint-Cergue, with runners following routes prepared by the CERN Orienteering Club. Orienteering is a sport of navigation, using only a compass, map and your sense of direction. The objective is to get to all the points on the map as quickly as possible, choosing your own paths as you run. This was the CERN club’s first successful participation in the World Cup, cementing its reputation as a fixture in the international orienteering world. Orienteering is not your typical Swiss pastime. Developed in Scandinavia, the sport has been gaining popularity internationally. “...

  13. Recycling disposable cups into paper plastic composites.

    Science.gov (United States)

    Mitchell, Jonathan; Vandeperre, Luc; Dvorak, Rob; Kosior, Ed; Tarverdi, Karnik; Cheeseman, Christopher

    2014-11-01

    The majority of disposable cups are made from paper plastic laminates (PPL) which consist of high quality cellulose fibre with a thin internal polyethylene coating. There are limited recycling options for PPLs and this has contributed to disposable cups becoming a high profile, problematic waste. In this work disposable cups have been shredded to form PPL flakes and these have been used to reinforce polypropylene to form novel paper plastic composites (PPCs). The PPL flakes and polypropylene were mixed, extruded, pelletised and injection moulded at low temperatures to prevent degradation of the cellulose fibres. The level of PPL flake addition and the use of a maleated polyolefin coupling agent to enhance interfacial adhesion have been investigated. Samples have been characterised using tensile testing, dynamic mechanical analysis (DMA) and thermogravimetric analysis. Use of a coupling agent allows composites containing 40 wt.% of PPL flakes to increase tensile strength of PP by 50% to 30 MPa. The Young modulus also increases from 1 to 2.5 GPa and the work to fracture increases by a factor of 5. The work demonstrates that PPL disposable cups have potential to be beneficially reused as reinforcement in novel polypropylene composites.

  14. ACCUWIND - Methods for classification of cup anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Dahlberg, J.Aa.; Friis Pedersen, T.; Busche, P.

    2006-05-15

    Errors associated with the measurement of wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show significant and not acceptable difference. The European CLASSCUP project posed the objectives to quantify the errors associated with the use of cup anemometers, and to develop a classification system for quantification of systematic errors of cup anemometers. This classification system has now been implemented in the IEC 61400-12-1 standard on power performance measurements in annex I and J. The classification of cup anemometers requires general external climatic operational ranges to be applied for the analysis of systematic errors. A Class A category classification is connected to reasonably flat sites, and another Class B category is connected to complex terrain, General classification indices are the result of assessment of systematic deviations. The present report focuses on methods that can be applied for assessment of such systematic deviations. A new alternative method for torque coefficient measurements at inclined flow have been developed, which have then been applied and compared to the existing methods developed in the CLASSCUP project and earlier. A number of approaches including the use of two cup anemometer models, two methods of torque coefficient measurement, two angular response measurements, and inclusion and exclusion of influence of friction have been implemented in the classification process in order to assess the robustness of methods. The results of the analysis are presented as classification indices, which are compared and discussed. (au)

  15. Fast Faraday Cup With High Bandwidth

    Science.gov (United States)

    Deibele, Craig E [Knoxville, TN

    2006-03-14

    A circuit card stripline Fast Faraday cup quantitatively measures the picosecond time structure of a charged particle beam. The stripline configuration maintains signal integrity, and stitching of the stripline increases the bandwidth. A calibration procedure ensures the measurement of the absolute charge and time structure of the charged particle beam.

  16. A Procedure for Classification of Cup-Anemometers

    DEFF Research Database (Denmark)

    Friis Pedersen, Troels; Paulsen, Uwe Schmidt

    1997-01-01

    The paper proposes a classification procedure for cup-anemometers based on similar principles as for power converters. A range of operational parameters are established within which the response of the cup-anemometer is evaluated. The characteristics of real cup-anemometers are fitted...... to a realistic 3D cup-anemometer model. Afterwards, the model is used to calculate the response under the range of operational conditions which are set up for the classification. Responses are compared to the normal linear calibration relationship, derived from Wind tunnel calibrations. Results of the 3D cup-anemometer...

  17. A Comparative Study of Apical Healing of Open Apices Using MTA and Ca(OH2 Apical Plugs in Cats

    Directory of Open Access Journals (Sweden)

    M. H. Zarrabi

    2005-06-01

    Full Text Available Statement of problem: Endodontic treatment of necrotic teeth with open apices is a challenge. After ruling out surgery as a treatment scheme and introduction of the multivisit apexification which in turn had its disadvantages, apical plug seems to be a suitable substitute treatment plan for such cases. Apical plug makes the treatment through formation of a barrier against the obturating material in a single visit.Purpose: The purpose of this study was to compare histologically the periapical healing using MTA and calcium hydroxide apical plugs after intervals of 4 and 12 weeks in cats.Materials and Methods: In this clinical trial study 64 canines of 16 healthy and mature cats were divided into 3 groups after a periapical lesion formation by over instrumentation in the apical area with files up to no.120. The first group included 24 teeth on which MTA apical plug was applied. The second group included 24 teeth on which Ca (OH 2 apical plug was applied. In both groups the canals were filled with gutta percha and sealer. The third group included 16 control teeth whose canals were left empty after instrumentation and debridement. The access cavities of all teeth were sealed with varnish and amalgam and the vital perfusion of cats was performed in 4 and 12 week intervals. Statistical analysis was established by χ2 and independence test.Results: After 4 weeks, periapical healing in the first group was 90%, in the second group 80% and in the third group, it was only 12.5 %. After 12 weeks, periapical healing occurred in 100% of the MTA group, while it was 57.1% in the second and 40%in the third group .Generally, in the study of histological parameters of healing, no statistical significant difference was observed between the 2 experimental groups,although the MTA group results were much better than the Ca (OH 2 group especially at 12 weeks.Conclusion: The use of MTA apical plug is more effective than Ca (OH 2 in treatment of necrotic teeth with open

  18. CUP-syndrome diagnostic procedure scheme.

    Science.gov (United States)

    Pujanek, Zuzanna; Burduk, Paweł K

    2013-01-01

    Patients with CUP-Syndrome represent a small percentage of patients treated by ENT doctor. Often, in spite of the implementation detailed diagnostics, detection of the primary tumor fails. Very important element is to follow the correct sequence of tests and taking into account conditions outside ENT. I our article, we would like to propose a diagnostic scheme including interview with patient, laryngological and imaging tests and multi-disciplinary consulting. We hope that this scheme will facilitate the treatment of patients with CUP-Syndrome and increase the efficiency of detection of primary tumor. Copyright © 2013 Polish Otorhinolaryngology - Head and Neck Surgery Society. Published by Elsevier Urban & Partner Sp. z.o.o. All rights reserved.

  19. Flow distortion on boom mounted cup anemometers

    DEFF Research Database (Denmark)

    Lindelöw, Per Jonas Petter; Friis Pedersen, Troels; Gottschall, Julia

    In this report we investigate on wind direction dependent errors in the measurement of the horizontal wind speed by boom mounted cup anemometers. The boom mounting on the studied lattice tower is performed according to IEC standard design rules, yet, larger deviations than predicted by flow models...... are observed. The errors on the measurements are likely caused by an underestimation of the flow distortions around the tower. In this paper an experimental method for deriving a correction formula and an in-field calibration is suggested. The method is based on measurements with two cup anemometers mounted...... in the measurement of wind turbine power performance, wind resource assessment and for providing purposeful in-field comparisons between different sensors, e.g. lidar anemometers. With the proposed method, direction dependent errors can be extracted and the mast flow distortion effect on the wind measurements...

  20. Analysis of Earing in Deep Drawn Cups

    Science.gov (United States)

    Aretz, Holger; Aegerter, Johannes; Engler, Olaf

    2010-06-01

    The cup-drawing of a strongly anisotropic sheet metal is simulated using a commercial finite element software along with a user material subroutine. In order to accurately describe the plastic anisotropy of the material the well-known recent yield function `Yld2004-18p' is extended. Regarding the experimental characterization of the considered material the occurrence of dynamic strain aging lead to an oscillating signal of the width change of the tensile samples, which prevented a reliable determination of plastic strain ratios (r-values). Thus, an improved measurement concept was developed that leads to a very robust and reproducible determination of r-values. Furthermore, a novel plane-strain tensile test sample is presented which is used for the characterization of the plastic anisotropy in biaxial loading states. A quantitative comparison with measured earing profiles of deep drawn cups illustrates the predictive capabilities of the numerical simulation.

  1. Sampling Bias on Cup Anemometer Mean Winds

    Science.gov (United States)

    Kristensen, L.; Hansen, O. F.; Højstrup, J.

    2003-10-01

    The cup anemometer signal can be sampled in several ways to obtain the mean wind speed. Here we discuss the sampling of series of mean wind speeds from consecutive rotor rotations, followed by unweighted and weighted averaging. It is shown that the unweighted averaging creates a positive bias on the long-term mean wind speed, which is at least one order of magnitude larger than the positive bias from the weighted averaging, also known as the sample-and-hold method. For a homogeneous, neutrally stratified flow the first biases are 1%-2%. For comparison the biases due to fluctuations of the three wind velocity components and due to calibration non-linearity are determined under the same conditions. The largest of these is the v-bias from direction fluctuations. The calculations pertain to the Risø P2546A model cup anemometer.

  2. Solar Probe Cup - Demonstrated Laboratory Performance

    Science.gov (United States)

    Case, A. W.; Kasper, J. C.; Korreck, K. E.; Stevens, M. L.; Larson, D. E.; Wright, K. H., Jr.; Gallagher, D. L.; Whittlesey, P. L.

    2016-12-01

    The Solar Probe Cup (SPC) is a Faraday Cup instrument that will fly on the Solar Probe Plus (SPP) spacecraft, orbiting the Sun as close as 9.86 solar radii from the center of the Sun. The SPC instrument is designed to measure the thermal solar wind plasma (protons, alphas, and electrons) that will be encountered throughout its close encounter with the Sun. Due to the solar wind flow being primarily radial, the SPC instrument is pointed directly at the Sun, resulting in an extreme thermal environment that must be tolerated throughout the primary data collection phase. Laboratory testing has been performed over the past 6 months to demonstrate the instrument's performance relative to its requirements, and to characterize the measurements over the expected thermal range. This presentation will demonstrate the performance of the instrument as measured in the lab, describe the operational configurations planned for flight, and discuss the data products that will be created.

  3. Apical root resorption in orthodontically treated adults.

    Science.gov (United States)

    Baumrind, S; Korn, E L; Boyd, R L

    1996-09-01

    This study analyzed the relationship in orthodontically treated adults between upper central incisor displacement measured on lateral cephalograms and apical root resorption measured on anterior periapical x-ray films. A multiple linear regression examined incisor displacements in four directions (retraction, advancement, intrusion, and extrusion) as independent variables, attempting to account for observed differences in the dependent variable, resorption. Mean apical resorption was 1.36 mm (sd +/- 1.46, n = 73). Mean horizontal displacement of the apex was -0.83 mm (sd +/- 1.74, n = 67); mean vertical displacement was 0.19 mm (sd +/- 1.48, n = 67). The regression coefficients for the intercept and for retraction were highly significant; those for extrusion, intrusion, and advancement were not. At the 95% confidence level, an average of 0.99 mm (se = +/- 0.34) of resorption was implied in the absence of root displacement and an average of 0.49 mm (se = +/- 0.14) of resorption was implied per millimeter of retraction. R2 for all four directional displacement variables (DDVs) taken together was only 0.20, which implied that only a relatively small portion of the observed apical resorption could be accounted for by tooth displacement alone. In a secondary set of univariate analyses, the associations between apical resorption and each of 14 additional treatment-related variables were examined. Only Gender, Elapsed Time, and Total Apical Displacement displayed statistically significant associations with apical resorption. Additional multiple regressions were then performed in which the data for each of these three statistically significant variables were considered separately, with the data for the four directional displacement variables. The addition of information on Elapsed Time or Total Apical Displacement did not explain a significant additional portion of the variability in apical resorption. On the other hand, the addition of information on Gender to the

  4. Microbiology and Treatment of Acute Apical Abscesses

    Science.gov (United States)

    Rôças, Isabela N.

    2013-01-01

    SUMMARY Acute apical abscess is the most common form of dental abscess and is caused by infection of the root canal of the tooth. It is usually localized intraorally, but in some cases the apical abscess may spread and result in severe complications or even mortality. The reasons why dental root canal infections can become symptomatic and evolve to severe spreading and sometimes life-threatening abscesses remain elusive. Studies using culture and advanced molecular microbiology methods for microbial identification in apical abscesses have demonstrated a multispecies community conspicuously dominated by anaerobic bacteria. Species/phylotypes commonly found in these infections belong to the genera Fusobacterium, Parvimonas, Prevotella, Porphyromonas, Dialister, Streptococcus, and Treponema. Advances in DNA sequencing technologies and computational biology have substantially enhanced the knowledge of the microbiota associated with acute apical abscesses and shed some light on the etiopathogeny of this disease. Species richness and abundance and the resulting network of interactions among community members may affect the collective pathogenicity and contribute to the development of acute infections. Disease modifiers, including transient or permanent host-related factors, may also influence the development and severity of acute abscesses. This review focuses on the current evidence about the etiology and treatment of acute apical abscesses and how the process is influenced by host-related factors and proposes future directions in research, diagnosis, and therapeutic approaches to deal with this disease. PMID:23554416

  5. Reasoning about RoboCup Soccer Narratives

    CERN Document Server

    Hajishirzi, Hannaneh; Mueller, Erik T; Amir, Eyal

    2012-01-01

    This paper presents an approach for learning to translate simple narratives, i.e., texts (sequences of sentences) describing dynamic systems, into coherent sequences of events without the need for labeled training data. Our approach incorporates domain knowledge in the form of preconditions and effects of events, and we show that it outperforms state-of-the-art supervised learning systems on the task of reconstructing RoboCup soccer games from their commentaries.

  6. The Economic Impact of the World Cup

    OpenAIRE

    Stefan Szymanski

    2002-01-01

    The World Cup will be the biggest sporting event of 2002, but the Japanese and Korean governments are also hoping that it will be one of the biggest economic events of the year. Impact studies by respected economic research institutes predict a dramatic boost to GDP in both countries. This paper explains how these forecasts are generated and explains the tendency for such forecasts to be over-optimistic. The paper concludes with some policy recommendations for governments and sporting bodies ...

  7. Management of knee osteoarthritis with cupping therapy

    Directory of Open Access Journals (Sweden)

    Asim Ali Khan

    2013-01-01

    Full Text Available The study aimed to evaluate the effect of cupping therapy at a clinical setting for knee osteoarthritis. A randomized, controlled clinical trial was conducted. Cupping was performed on 0-6 th day; 9-11 th day and 14 th day, i.e., 11 sittings follow-up to determine longer term carryover of treatment effects utilizing both objective and subjective assessment. The assessment was performed before and after treatment spreading over a period of 15 days. The results of this study shows significant and better results in the overall management of knee osteoarthritis, particularly in relieving pain, edema, stiffness and disability. The efficacy of treatment with cupping therapy in relieving signs and symptoms of knee osteoarthritis is comparable to that of acetaminophen 650 mg thrice a day orally, in terms of analgesia, anti-inflammatory and resolution of edema with minimal and temporary side-effects like echymosis and blister formation while as control drug has greater side-effects particularly on upper gastrointestinal tract. It is recommended that further studies are conducted with a larger study samples and of longer duration.

  8. Management of knee osteoarthritis with cupping therapy.

    Science.gov (United States)

    Khan, Asim Ali; Jahangir, Umar; Urooj, Shaista

    2013-10-01

    The study aimed to evaluate the effect of cupping therapy at a clinical setting for knee osteoarthritis. A randomized, controlled clinical trial was conducted. Cupping was performed on 0-6(th) day; 9-11(th) day and 14(th) day, i.e., 11 sittings follow-up to determine longer term carryover of treatment effects utilizing both objective and subjective assessment. The assessment was performed before and after treatment spreading over a period of 15 days. The results of this study shows significant and better results in the overall management of knee osteoarthritis, particularly in relieving pain, edema, stiffness and disability. The efficacy of treatment with cupping therapy in relieving signs and symptoms of knee osteoarthritis is comparable to that of acetaminophen 650 mg thrice a day orally, in terms of analgesia, anti-inflammatory and resolution of edema with minimal and temporary side-effects like echymosis and blister formation while as control drug has greater side-effects particularly on upper gastrointestinal tract. It is recommended that further studies are conducted with a larger study samples and of longer duration.

  9. Compilation of LLNL CUP-2 Data

    Energy Technology Data Exchange (ETDEWEB)

    Eppich, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kips, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lindvall, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-31

    The CUP-2 uranium ore concentrate (UOC) standard reference material, a powder, was produced at the Blind River uranium refinery of Eldorado Resources Ltd. in Canada in 1986. This material was produced as part of a joint effort by the Canadian Certified Reference Materials Project and the Canadian Uranium Producers Metallurgical Committee to develop a certified reference material for uranium concentration and the concentration of several impurity constituents. This standard was developed to satisfy the requirements of the UOC mining and milling industry, and was characterized with this purpose in mind. To produce CUP-2, approximately 25 kg of UOC derived from the Blind River uranium refinery was blended, homogenized, and assessed for homogeneity by X-ray fluorescence (XRF) analysis. The homogenized material was then packaged into bottles, containing 50 g of material each, and distributed for analysis to laboratories in 1986. The CUP-2 UOC standard was characterized by an interlaboratory analysis program involving eight member laboratories, six commercial laboratories, and three additional volunteer laboratories. Each laboratory provided five replicate results on up to 17 analytes, including total uranium concentration, and moisture content. The selection of analytical technique was left to each participating laboratory. Uranium was reported on an “as-received” basis; all other analytes (besides moisture content) were reported on a “dry-weight” basis.

  10. [Progress of researches on the mechanism of cupping therapy].

    Science.gov (United States)

    Cui, Shuai; Cui, Jin

    2012-12-01

    Cupping therapy of Chinese medicine is able to relieve a variety of diseases or clinical conditions, which results from the comprehensive effects of multiple types of stimulation exerted onto the regional acupoint areas. Among the stimuli, the negative pressure from cupping is one of the main factors inducing therapeutic effects. In the present paper, the authors review development of researches on the underlying mechanism of therapeutic effects of cupping-negative pressure from 1) the factor of intra-cup negative pressure; 2) influence of intra-cup negative pressure on cup-blackspot formation; 3) influence of cupping on regional blood vessels and blood flow; 4) effect of cupping on regional ultrastructure of the capillary in the raw-surface tissue; 5) effect of cupping-negative pressure on regional endothelial cells; and 6) biological effects of negative pressure drainage. Generally, cupping induced negative pressure can dilate local blood vessels to improve microcirculation, promote capillary endothelial cells repair, accelerate granulation and angiogenesis, etc., in the regional tissues, normalizing the patients' functional state at last.

  11. The Downside of Right Ventricular Apical Pacing

    Directory of Open Access Journals (Sweden)

    Andrew Brenyo, MD

    2012-05-01

    Full Text Available The right ventricular (RV apex has been the standard pacing site since the development of implantable pacemaker technology. Although RV pacing was initially only utilized for the treatment of severe bradyarrhythmias usually due to complete heart block, today the indications for and implantation of RV pacing devices is dramatically larger. Recently, the adverse effects of chronic RV apical pacing have been described including an increased risk of heart failure and death. This review details the detrimental effects of RV apical pacing and their shared hemodynamic pathophysiology. In particular, the role of RV apical pacing induced ventricular dyssynchrony is highlighted with a specific focus on differential outcome based upon QRS morphology at implant.

  12. Compilation of LLNL CUP-2 Data

    Energy Technology Data Exchange (ETDEWEB)

    Eppich, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kips, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lindvall, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-31

    The CUP-2 uranium ore concentrate (UOC) standard reference material, a powder, was produced at the Blind River uranium refinery of Eldorado Resources Ltd. in Canada in 1986. This material was produced as part of a joint effort by the Canadian Certified Reference Materials Project and the Canadian Uranium Producers Metallurgical Committee to develop a certified reference material for uranium concentration and the concentration of several impurity constituents. This standard was developed to satisfy the requirements of the UOC mining and milling industry, and was characterized with this purpose in mind. To produce CUP-2, approximately 25 kg of UOC derived from the Blind River uranium refinery was blended, homogenized, and assessed for homogeneity by X-ray fluorescence (XRF) analysis. The homogenized material was then packaged into bottles, containing 50 g of material each, and distributed for analysis to laboratories in 1986. The CUP-2 UOC standard was characterized by an interlaboratory analysis program involving eight member laboratories, six commercial laboratories, and three additional volunteer laboratories. Each laboratory provided five replicate results on up to 17 analytes, including total uranium concentration, and moisture content. The selection of analytical technique was left to each participating laboratory. Uranium was reported on an “as-received” basis; all other analytes (besides moisture content) were reported on a “dry-weight” basis. A bottle of 25g of CUP-2 UOC standard as described above was purchased by LLNL and characterized by the LLNL Nuclear Forensics Group. Non-destructive and destructive analytical techniques were applied to the UOC sample. Information obtained from short-term techniques such as photography, gamma spectrometry, and scanning electron microscopy were used to guide the performance of longer-term techniques such as ICP-MS. Some techniques, such as XRF and ICP-MS, provided complementary types of data. The results

  13. Analytic methods in assessment of optic nerve cupping.

    Science.gov (United States)

    Jindra, L F; Kuběna, T; Gaudino, R N

    2014-06-01

    The intent of this paper is to provide a systems-based analysis of the methods used to evaluate optic nerve cupping, identify potential flaws in these systems, and propose alternatives better to assess this anatomic quantity. Estimation of optic nerve cupping requires an analytic understanding of both the psychophysical as well as the mathematical bases inherent in this measure. When the (decimal-based) cup-to-disc ratio is used to quantitate optic nerve cupping, a one-dimensional, linear estimate is produced, which in turn is derived from two- or three-dimensional, non-linear physical quantities of area or volume, respectively. When extrapolating from volume, to area, to linear measures, due to the psychophysical constraints which limit this task, such a data-compressed estimate of optic nerve cupping may neither accurately reflect, nor correctly represent, the true amount of cupping actually present in the optic nerve head. This type of one-dimensional metric (when comparing calculations from two- or three-dimensional measures over a range of optic nerve cupping), appears to introduce errors which, while most pronounced earlier on in the disease progression, often overestimate the amount of relative cupping (percent cupping) present in a pathological process like glaucoma. The same systemic errors can also lead to overestimation of the progression in cupping, especially in optic nerves with low cup-to disc values. To provide clinically meaningful estimates of optic nerve cupping, the practitioner needs to be aware of psychophysical and mathematical limitations inherent in using a linear cup-to-disc ratio to estimate the amount of cupping observed in a physical structure like the optic disc. The resultant flaws introduced by observer extrapolation from three, to two, to one dimensions (volume, area, and linear); transposition from non-linear to linear quantities; and optical illusions, caused by factors like disc topology, morphology, and ametropia, can all

  14. Lipocalins Are Required for Apical Extracellular Matrix Organization and Remodeling in Caenorhabiditis elegans.

    Science.gov (United States)

    Forman-Rubinsky, Rachel; Cohen, Jennifer D; Sundaram, Meera V

    2017-08-25

    A lipid and glycoprotein-rich apical extracellular matrix (aECM) or glycocalyx lines exposed membranes in the body, and is particularly important to protect narrow tube integrity. Lipocalins ("fat cups") are small, secreted, cup-shaped proteins that bind and transport lipophilic cargo and are often found in luminal or aECM compartments such as mammalian plasma, urine, or tear film. Although some lipocalins can bind known aECM lipids and/or matrix metalloproteinases, it is not known if and how lipocalins affect aECM structure due to challenges in visualizing the aECM in most systems. Here we show that two C. elegans lipocalins, LPR-1 and LPR-3, have distinct functions in the pre-cuticular glycocalyx of developing external epithelia. LPR-1 moves freely through luminal compartments, while LPR-3 stably localizes to a central layer of the membrane-anchored glycocalyx, adjacent to the transient zona pellucida domain protein LET-653. Like LET-653 and other C. elegans glycocalyx components, these lipocalins are required to maintain the patency of the narrow excretory duct tube, and also affect multiple aspects of later cuticle organization. lpr-1 mutants cannot maintain a continuous excretory duct apical domain and have misshapen cuticle ridges (alae) and abnormal patterns of cuticular surface lipid staining. lpr-3 mutants cannot maintain a passable excretory duct lumen, properly degrade the eggshell, or shed old cuticle during molting, and they lack cuticle barrier function. Based on these phenotypes, we infer that both LPR-1 and LPR-3 are required to build a properly organized aECM, while LPR-3 additionally is needed for aECM clearance and remodeling. The C. elegans glycocalyx provides a powerful system, amenable to both genetic analysis and live imaging, for investigating how lipocalins and lipids impact aECM structure. Copyright © 2017, Genetics.

  15. Perceptual elements in Penn & Teller's "Cups and Balls" magic trick.

    Science.gov (United States)

    Rieiro, Hector; Martinez-Conde, Susana; Macknik, Stephen L

    2013-01-01

    Magic illusions provide the perceptual and cognitive scientist with a toolbox of experimental manipulations and testable hypotheses about the building blocks of conscious experience. Here we studied several sleight-of-hand manipulations in the performance of the classic "Cups and Balls" magic trick (where balls appear and disappear inside upside-down opaque cups). We examined a version inspired by the entertainment duo Penn & Teller, conducted with three opaque and subsequently with three transparent cups. Magician Teller used his right hand to load (i.e. introduce surreptitiously) a small ball inside each of two upside-down cups, one at a time, while using his left hand to remove a different ball from the upside-down bottom of the cup. The sleight at the third cup involved one of six manipulations: (a) standard maneuver, (b) standard maneuver without a third ball, (c) ball placed on the table, (d) ball lifted, (e) ball dropped to the floor, and (f) ball stuck to the cup. Seven subjects watched the videos of the performances while reporting, via button press, whenever balls were removed from the cups/table (button "1") or placed inside the cups/on the table (button "2"). Subjects' perception was more accurate with transparent than with opaque cups. Perceptual performance was worse for the conditions where the ball was placed on the table, or stuck to the cup, than for the standard maneuver. The condition in which the ball was lifted displaced the subjects' gaze position the most, whereas the condition in which there was no ball caused the smallest gaze displacement. Training improved the subjects' perceptual performance. Occlusion of the magician's face did not affect the subjects' perception, suggesting that gaze misdirection does not play a strong role in the Cups and Balls illusion. Our results have implications for how to optimize the performance of this classic magic trick, and for the types of hand and object motion that maximize magic misdirection.

  16. Projekt managementu sportovní akce OVB Cup Praha 2013

    OpenAIRE

    Fried, Jan

    2013-01-01

    Title: Project of the sport event OVB Cup Praha 2013 management Objectives: The main objective is to create a project of management and marketing of the sport event OVB Cup Praha 2013. Methods: I chose these methods: participative observation, interview with the use of instructions, brainstorming method, competitor's analysis and SWOT analysis. Results: This thesis should result into a project that should enable the complete organization of the sport event OVB Cup Praha 2013. Generally, it wi...

  17. Optimization of the blank holder force in cup drawing

    OpenAIRE

    Gharib, H.; A.S. Wifi,; M. Younan; Nassef, A

    2006-01-01

    Purpose: Develop an optimization strategy for the cup drawing process in order to produce a defect free deepdrawn cup.Design/methodology/approach: An optimization strategy for the blank holder force (BHF) scheme is proposedwhich searches for the BHF scheme that minimizes the maximum punch force and avoids process limits. Thisstrategy is applied to the linearly varying BHF scheme and compared to the constant BHF.Findings: The optimized linear BHF scheme resulted in an improved cup forming when...

  18. Wear numbers for ball cup and journal bearings

    OpenAIRE

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millimetres, the wear modulus in newtons per square millimetre, the maximum wear depth rate of the cup or the cylindrical bearing in millimetres per second, the force between the mating surfaces in newto...

  19. Management sportovní akce - Mystic skate cup

    OpenAIRE

    Dražďák, Pavel

    2013-01-01

    Title: Sport event management - Mystic skate cup Objectives: The main objective of this bachelor thesis is to analyze organization of Mystic skate cup. And alternatively suggest possible improvement for upcoming events. Methods: For analyzing whole event I firstly used the descriptive analysis and afterwards I apply the SWOT analysis, for which I gathered materials through personal interrogation and also interview with the director of the cup. Results: The work highlights the strong aspects o...

  20. Aerodynamic Analysis of Cup Anemometers Performance: The Stationary Harmonic Response

    OpenAIRE

    Santiago Pindado; Javier Cubas; Ángel Sanz-Andrés

    2013-01-01

    The effect of cup anemometer shape parameters, such as the cups’ shape, their size, and their center rotation radius, was experimentally analyzed. This analysis was based on both the calibration constants of the transfer function and the most important harmonic term of the rotor’s movement, which due to the cup anemometer design is the third one. This harmonic analysis represents a new approach to study cup anemometer performances. The results clearly showed a good correlation between the ave...

  1. [The manipulation technique and clinical application of kinetic cupping].

    Science.gov (United States)

    Luo, Rong; Liu, Qi; Sun, Dan

    2013-07-01

    The characteristic of kinetic cupping is explained from treatment principles, manipulation and clinical application. The kinetic cupping is a new particular therapy that combines traditional cupping and kinetic therapy. With cups on the patient, limb action like flexion-extension, adduction-abduction and rotation is made to reinforce clinical effects, which has simple and safe manipulation, obvious efficacy and is well accepted by patient. It has more obvious advantage for pain that was caused by large-area soft tissue injury and discomfort where acupuncture is not appropriate.

  2. Aerodynamic analysis of cup anemometers performance: the stationary harmonic response.

    Science.gov (United States)

    Pindado, Santiago; Cubas, Javier; Sanz-Andrés, Angel

    2013-01-01

    The effect of cup anemometer shape parameters, such as the cups' shape, their size, and their center rotation radius, was experimentally analyzed. This analysis was based on both the calibration constants of the transfer function and the most important harmonic term of the rotor's movement, which due to the cup anemometer design is the third one. This harmonic analysis represents a new approach to study cup anemometer performances. The results clearly showed a good correlation between the average rotational speed of the anemometer's rotor and the mentioned third harmonic term of its movement.

  3. Cell division activity during apical hook development

    NARCIS (Netherlands)

    Raz, V.; Koornneef, M.

    2001-01-01

    Growth during plant development is predominantly governed by the combined activities of cell division and cell elongation. The relative contribution of both activities controls the growth of a tissue. A fast change in growth is exhibited at the apical hypocotyl of etiolated seedlings where cells

  4. Cell division activity during apical hook development

    NARCIS (Netherlands)

    Raz, V.; Koornneef, M.

    2001-01-01

    Growth during plant development is predominantly governed by the combined activities of cell division and cell elongation. The relative contribution of both activities controls the growth of a tissue. A fast change in growth is exhibited at the apical hypocotyl of etiolated seedlings where cells gro

  5. Normal apical pleural tenting: CT findings

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Dong Wook; Yoon, Yup; Jeong, Yu Mee; Park, Joo Chul; Cho, Kyu Seok; Ahn, Hee Kyung; Lee, Won Kyu [Kyunghee Univ. College of Medicine, Seoul (Korea, Republic of)

    1996-07-01

    To define the anatomy of apical pleural tenting commonly seen in computed tomography(CT) of the upper posterior thorax. Chest CTs of 393 patients with no pleural disease clinically and radiographically were analyzed. GE-9800 Quick and Toshiba-900S were used, employing the usual contrast enhanced CT technique. CT findings of focal pleural tenting on the inner side of the upper posterior thorax(apical pleural tenting) were evalvated and analysed in terms of location and shape. The CT findings were compared with the gross findings of the inner aspect of the posterior cadaveric thorax. Apical pleural tenting was formed by the upper border of the subcostal muscle. It's incidence was 44%(n=171), with bilaterality in 29%(n=49), and unilaterality in 71% of cases(n=122). This tenting was most frequently found between the third rib and the fourth intercostal space(81%), and seen in the outer third(42%) or central third(41%) part of the posterior costal pleura. In fifteen cases(7%), it was directed obliquely and had changed its location from the inner to the central or the central to the outer part. The shapes of the tenting were classified as follows:type 1(convex inner border with sharp apex, 62%); type 2(convex inner border with broad apex, 23%);type 3(undulated contour of apex, 13%);and type 4(two-spike apices, 1%). Apical pleura tenting is a normal CT finding probably demonstrated by the upper border of the subcostal muscle. Misdiagnosis of pleural disease can be avoided by recognition of the location and type of this tenting.

  6. Microbiome in the Apical Root Canal System of Teeth with Post-Treatment Apical Periodontitis

    Science.gov (United States)

    Siqueira, José F.; Antunes, Henrique S.; Rôças, Isabela N.; Rachid, Caio T. C. C.

    2016-01-01

    Introduction Bacteria present in the apical root canal system are directly involved with the pathogenesis of post-treatment apical periodontitis. This study used a next-generation sequencing approach to identify the bacterial taxa occurring in cryopulverized apical root samples from root canal-treated teeth with post-treatment disease. Methods Apical root specimens obtained during periradicular surgery of ten adequately treated teeth with persistent apical periodontitis were cryogenically ground. DNA was extracted from the powder and the microbiome was characterized on the basis of the V4 hypervariable region of the 16S rRNA gene by using paired-end sequencing on Illumina MiSeq device. Results All samples were positive for the presence of bacterial DNA. Bacterial taxa were mapped to 11 phyla and 103 genera composed by 538 distinct operational taxonomic units (OTUs) at 3% of dissimilarity. Over 85% of the sequences belonged to 4 phyla: Proteobacteria, Firmicutes, Fusobacteria and Actinobacteria. In general, these 4 phyla accounted for approximately 80% of the distinct OTUs found in the apical root samples. Proteobacteria was the most abundant phylum in 6/10 samples. Fourteen genera had representatives identified in all cases. Overall, the genera Fusobacterium and Pseudomonas were the most dominant. Enterococcus was found in 4 cases, always in relatively low abundance. Conclusions This study showed a highly complex bacterial community in the apical root canal system of adequately treated teeth with persistent apical periodontitis. This suggests that this disease is characterized by multispecies bacterial communities and has a heterogeneous etiology, because the community composition largely varied from case to case. PMID:27689802

  7. Apical domain polarization localizes actin-myosin activity to drive ratchet-like apical constriction

    OpenAIRE

    Mason, Frank M.; Tworoger, Michael; Martin, Adam C.

    2013-01-01

    Apical constriction promotes epithelia folding, which changes tissue architecture. During Drosophila gastrulation, mesoderm cells exhibit repeated contractile pulses that are stabilized such that cells apically constrict like a ratchet. The transcription factor Twist is required to stabilize cell shape, however it is unknown how Twist spatially coordinates downstream signals to prevent cell relaxation. We find that during constriction, Rho-associated kinase (Rok) is polarized to the middle of...

  8. FEA OF RECTANGULAR CUP DEEP DRAWING PROCESS

    Directory of Open Access Journals (Sweden)

    Awad D.S

    2012-08-01

    Full Text Available Deep drawing is a process for shaping flat sheets into cup shaped articles without fracture or excessive localized thinning. The complex deep drawing of thin metallic sheets is widely used during industrial material forming applications. It allows production of thin walled parts with complicated shapes such as automotive panels or structural parts. The process consists of the plastic deformation of an initial at blank subjected to the action of a rigid punch and die while constrained on the periphery by a blank holder. Conventional design processes for sheet metal forming are usually based on a empirical approach. However, due to the requirement of high precision and reliability in shaped parts, these methods are far away from a final and reliable solution. Nowadays, Finite Element Method (FEM is being gradually adopted by industry to envisage the formability properties of sheet metals. The design and control of a deep drawing process depends not only on the work piece material, but also on the condition at the tool work piece interface, the mechanics of plastic deformation and the equipment used. In this paper, rectangular cup component of EDDQ Steel and Mild Steel is simulated using HYPERMESH 11 by varying various process parameters.

  9. Development of an Innovative Medical Cupping Device

    Directory of Open Access Journals (Sweden)

    Feng-Chyi Duh

    2016-10-01

    Full Text Available Temperature increases to influence the organs are often used in Chinese medicine therapy. A heat therapy cup was developed in this study with temperature control, timer, and heat therapy functions. The concept behind these therapeutic aids is traditional Chinese medicine combined with modern technology and the designs include timers and temperature control. The completed prototypes were used for cupping therapy. After testing, it was found that the standard deviation was greater at a lower temperature setting (To while at a higher To the standard deviation was lower. At To of 30, 40, 50, and 60°C, the relative changes in standard deviations were 5.27%, 2.50%, 2.66%, and 0.88%, respectively. The results indicated that the timer and temperature control functioned properly. Therefore, the designed medical aid, which is an important tool in Chinese medicine, can be provided to people of all ages to maintain health, help with rehabilitation, or to boost energy.

  10. Flow distortion on boom mounted cup anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Lindeloew-Marsden, P.; Pedersen, Troels F.; Gottschall, J.; Vesth, A.; Paulsen, R.W.U.; Courtney, M.S.

    2010-08-15

    In this report we investigate on wind direction dependent errors in the measurement of the horizontal wind speed by boom mounted cup anemometers. The boom mounting on the studied lattice tower is performed according to IEC standard design rules, yet, larger deviations than predicted by flow models are observed. The errors on the measurements are likely caused by an underestimation of the flow distortions around the tower. In this paper an experimental method for deriving a correction formula and an in-field calibration is suggested. The method is based on measurements with two cup anemometers mounted with booms at the same height but pointing in 60 deg. different directions. In the examined case of a 1.9 m wide equilateral triangular lattice tower with booms protruding 4.1 m at 80 m height the measurement errors are observed to reach up to +- 2 %. Errors of this magnitude are severely problematic in the measurement of wind turbine power performance, wind resource assessment and for providing purposeful in-field comparisons between different sensors, e.g. lidar anemometers. With the proposed method, direction dependent errors can be extracted and the mast flow distortion effect on the wind measurements corrected to an uncertainty estimated to better than 0.5%. This level of uncertainty is probably acceptable for the above mentioned applications. (author)

  11. Specific expression of DR5 promoter in rice roots using a tCUP derived promoter-reporter system.

    Directory of Open Access Journals (Sweden)

    Jie Zhou

    Full Text Available Variation of transgene expression caused by either position effect at the insertion site or the promoter/enhancer elements employed for the expression of selectable marker genes has complicated phenotype characterization and caused misinterpretation. We have developed a reporter system in rice to analyze the influence of vector configuration, spacer and selectable marker gene promoter on the expression of the promoterless GUS reporter and DR5 promoter. Our results indicate that a spacer inserted between the reversed 35S promoter and the GUS reporter could reduce leaky expression of the reporter but was unable to block the nonspecific expression of DR5::GUS. Stacking the selectable marker unit in head to tail with the GUS reporter aided the gene specific expression of the GUS reporter under the DR5 promoter even when the 35S promoter is used for expression of the selectable marker. Compared to 35S under this configuration, a quick and distinctive expression of DR5::GUS was observed in the root cap, quiescent center and xylem cells in the root apical meristem by using the tCUP derived promoter (tCUP1 for selection, that is similar to the pattern obtained by a sensitive DR5 variant (DR5rev in Arabidopsis. These data suggest a conserved property of the tCUP promoter in preventing enhancer-promoter interactions in rice as it does in Arabidopsis, and also demonstrate that an analogous distal auxin maximum exists in roots of rice. Therefore, the tCUP promoter based selection system provides a new strategy for specific expression of transgenes in rice.

  12. A Case of Persistent Apical Ballooning Complicated by Apical Thrombus in Takotsubo Cardiomyopathy of Systemic Lupus Erythematosus Patient

    National Research Council Canada - National Science Library

    Shim, In Kyoung; Kim, Bong-Joon; Kim, Hyunsu; Lee, Jae-Woo; Cha, Tae-Joon; Heo, Jung Ho

    2013-01-01

    .... The prognosis is favorable with the normalization of wall motion abnormalities within weeks. We report a case of persistent apical ballooning complicated by an apical thrombus in Takotsubo cardiomyopathy of systemic lupus erythematous patient...

  13. Distance constant of the Risø cup anemometer

    DEFF Research Database (Denmark)

    Kristensen, L.; Frost Hansen, O.

    2002-01-01

    The theory for cup-anemometer dynamics is presented in some detail and two methods of obtaining the distance constant lo are discussed. The first method is based on wind tunnel measurements: with a constant wind speed the cup anemometer is released from alocked position of the rotor...

  14. Five Cups: Observation, Experimentation, and Communication in Science.

    Science.gov (United States)

    Bauer, Christopher F.

    2002-01-01

    Describes the five-cups activity in which students explore materials in the cups. Discusses the effects of this activity on students' understanding of the nature of evidence and the quality and evaluation of that evidence. Includes test results during class and overnight. (KHR)

  15. Suction Cup Induced Palatal Fistula: Surgical Closure by Palatal ...

    African Journals Online (AJOL)

    a maxillary complete denture with a suction cup.[2] A suction cup because of its ... lead to the necrosis of the palatal mucosa and the bone leading ... is not being recommended because of its pathological effect on the palatal tissues leading to.

  16. Can a cup anemometer 'underspeed'? A heretical question

    DEFF Research Database (Denmark)

    Kristensen, L.

    2002-01-01

    An analysis of cup-anemometer dynamics has been carried out in order to determine whether the mean-wind velocity can have a negative bias. This would be contrary to the general belief that cup anemometers always overspeed. Compared to prior analyses, the effect of a possible nonlinearity of the c...

  17. A critical comparison of ten disposable cup LCAs

    Energy Technology Data Exchange (ETDEWEB)

    Harst, Eugenie van der, E-mail: eugenie.vanderharst@wur.nl [Environmental Systems Analysis Group, Wageningen University, P.O. Box 47, NL-6700 AA Wageningen (Netherlands); Potting, José, E-mail: jose.potting@wur.nl [Environmental Systems Analysis Group, Wageningen University, P.O. Box 47, NL-6700 AA Wageningen (Netherlands); Environmental Strategies Research (fms), KTH Royal Institute of Technology, SE-110 44 Stockholm (Sweden)

    2013-11-15

    Disposable cups can be made from conventional petro-plastics, bioplastics, or paperboard (coated with petro-plastics or bioplastics). This study compared ten life cycle assessment (LCA) studies of disposable cups with the aim to evaluate the robustness of their results. The selected studies have only one impact category in common, namely climate change with global warming potential (GWP) as its category indicator. Quantitative GWP results of the studies were closer examined. GWPs within and across each study show none of the cup materials to be consistently better than the others. Comparison of the absolute GWPs (after correction for the cup volume) also shows no consistent better or worse cup material. An evaluation of the methodological choices and the data sets used in the studies revealed their influence on the GWP. The differences in GWP can be attributed to a multitude of factors, i.e., cup material and weight, production processes, waste processes, allocation options, and data used. These factors basically represent different types of uncertainty. Sensitivity and scenario analyses provided only the influence of one factor at once. A systematic and simultaneous use of sensitivity and scenario analyses could, in a next research, result in more robust outcomes. -- Highlights: • Conflicting results from life cycle assessment (LCA) on disposable cups • GWP results of LCAs did not point to a best or worst cup material. • Differences in GWP results are due to methodological choices and data sets used. • Standardized LCA: transparency of LCA studies, but still different in approaches.

  18. Frictional torque numbers for ball cup and journal bearings

    OpenAIRE

    Ligterink, D.J.

    1982-01-01

    Plastic bearing material wears in ball cup and journal bearings. Contact areas in the ball cup and the journal bearing increase. The frictional torque needed to rotate the ball or journal also increases. When the coefficient of friction is assumed to be constant during wearing out, the frictional torque increases to a maximum of 1.273 times the frictional torque at zero wear.

  19. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millim

  20. Frictional torque numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.

    1982-01-01

    Plastic bearing material wears in ball cup and journal bearings. Contact areas in the ball cup and the journal bearing increase. The frictional torque needed to rotate the ball or journal also increases. When the coefficient of friction is assumed to be constant during wearing out, the frictional t

  1. A critical comparison of ten disposable cup LCAs

    NARCIS (Netherlands)

    Harst, van der E.J.M.; Potting, J.

    2013-01-01

    Disposable cups can be made from conventional petro-plastics, bioplastics, or paperboard (coated with petro-plastics or bioplastics). This study compared ten life cycle assessment (LCA) studies of disposable cups with the aim to evaluate the robustness of their results. The selected studies have

  2. Type III apical transportation of root canal

    Directory of Open Access Journals (Sweden)

    Shiv P Mantri

    2012-01-01

    Full Text Available Procedural accidents leading to complications such as canal transportation have been ascribed to inapt cleaning and shaping concepts. Canal transportation is an undesirable deviation from the natural canal path. Herewith a case of apical transportation of root canal resulting in endodontic retreatment failure and its management is presented. A healthy 21-year-old young male presented discomfort and swelling associated with painful endodontically retreated maxillary incisor. Radiograph revealed periradicular radiolucency involving underfilled 11 and overfilled 12. Insufficiently obturated 11 exhibited apical transportation of canal. This type III transportation was treated by periradicular surgery and repair using white mineral trioxide aggregate (MTA. Comfortable asymptomatic patient presented uneventful healing at third and fourth month recall visits. A decrease in the size of radiolucency in radiograph supported the clinical finding. In the present case, MTA is useful in repairing the transportation defect. The result of these procedures is predictable and successful.

  3. Evaluation of three instrumentation techniques at the precision of apical stop and apical sealing of obturation

    Science.gov (United States)

    GENÇ, Özgür; ALAÇAM, Tayfun; KAYAOGLU, Guven

    2011-01-01

    Objective The aim of this study was to investigate the ability of two NiTi rotary apical preparation techniques used with an electronic apex locator-integrated endodontic motor and a manual technique to create an apical stop at a predetermined level (0.5 mm short of the apical foramen) in teeth with disrupted apical constriction, and to evaluate microleakage following obturation in such prepared teeth. Material and Methods: 85 intact human mandibular permanent incisors with single root canal were accessed and the apical constriction was disrupted using a #25 K-file. The teeth were embedded in alginate and instrumented to #40 using rotary Lightspeed or S-Apex techniques or stainless-steel K-files. Distance between the apical foramen and the created apical stop was measured to an accuracy of 0.01 mm. In another set of instrumented teeth, root canals were obturated using gutta-percha and sealer, and leakage was tested at 1 week and 3 months using a fluid filtration device. Results All techniques performed slightly short of the predetermined level. Closest preparation to the predetermined level was with the manual technique and the farthest was with S-Apex. A significant difference was found between the performances of these two techniques (p<0.05). Lightspeed ranked in between. Leakage was similar for all techniques at either period. However, all groups leaked significantly more at 3 months compared to 1 week (p<0.05). Conclusions Despite statistically significant differences found among the techniques, deviations from the predetermined level were small and clinically acceptable for all techniques. Leakage following obturation was comparable in all groups. PMID:21655774

  4. Evaluation of three instrumentation techniques at the precision of apical stop and apical sealing of obturation

    Directory of Open Access Journals (Sweden)

    Özgür Genç

    2011-08-01

    Full Text Available OBJECTIVE: The aim of this study was to investigate the ability of two NiTi rotary apical preparation techniques used with an electronic apex locator-integrated endodontic motor and a manual technique to create an apical stop at a predetermined level (0.5 mm short of the apical foramen in teeth with disrupted apical constriction, and to evaluate microleakage following obturation in such prepared teeth. MATERIAL AND METHODS: 85 intact human mandibular permanent incisors with single root canal were accessed and the apical constriction was disrupted using a #25 K-file. The teeth were embedded in alginate and instrumented to #40 using rotary Lightspeed or S-Apex techniques or stainless-steel K-files. Distance between the apical foramen and the created apical stop was measured to an accuracy of 0.01 mm. In another set of instrumented teeth, root canals were obturated using gutta-percha and sealer, and leakage was tested at 1 week and 3 months using a fluid filtration device. RESULTS: All techniques performed slightly short of the predetermined level. Closest preparation to the predetermined level was with the manual technique and the farthest was with S-Apex. A significant difference was found between the performances of these two techniques (p<0.05. Lightspeed ranked in between. Leakage was similar for all techniques at either period. However, all groups leaked significantly more at 3 months compared to 1 week (p<0.05. CONCLUSIONS: Despite statistically significant differences found among the techniques, deviations from the predetermined level were small and clinically acceptable for all techniques. Leakage following obturation was comparable in all groups.

  5. Auxin at the shoot apical meristem

    OpenAIRE

    Vernoux, Teva; Besnard, Fabrice; Traas, Jan

    2010-01-01

    Plants continuously generate new tissues and organs through the activity of populations of undifferentiated stem cells, called meristems. Here, we discuss the so-called shoot apical meristem (SAM), which generates all the aerial parts of the plant. It has been known for many years that auxin plays a central role in the functioning of this meristem. Auxin is not homogeneously distributed at the SAM and it is thought that this distribution is interpreted in terms of differential gene expression...

  6. Pathogenesis of Apical Periodontitis: a Literature Review

    OpenAIRE

    2012-01-01

    ABSTRACT Objectives This review article discusses the host response in apical periodontitis with the main focus on cytokines, produced under this pathological condition and contributing to the degradation of periradicular tissues. The pace of research in this field has greatly accelerated in the last decade. Here we provide an analysis of studies published in this area during this period. Material and methods Literature was selected through a search of PubMed electronic database. The keywords...

  7. Shoot Apical Meristem Organization in Several Philippine Species of Selaginella

    Directory of Open Access Journals (Sweden)

    Prescillano Zamora

    1993-06-01

    Full Text Available This paper reports for the first time the occurrence of two types of shoot apical meristem organization on the main and lateral shoots of eight Philippine species of Selaginella: (1 shoot apical meristem with a single lenticular apical cell in S. cupressina and S. delicatula and (a shoot apical meristem with a row of several prominent prismatic apical cells in the lateral plane in S. jagorii, S. halconensis, S. involvens (S. polyura, S. peltata, S. flagellifera (S. biformis, S. nummularia, S. aristata, and S. philippina (endemic.

  8. Architecture of apical dendrites in the murine neocortex: dual apical dendritic systems.

    Science.gov (United States)

    Escobar, M I; Pimienta, H; Caviness, V S; Jacobson, M; Crandall, J E; Kosik, K S

    1986-04-01

    A monoclonal antibody (5F9) against microtubule-associated protein 2 is a selective and sensitive marker for neocortical dendrites in the mouse. The marker stains all dendrites. It affords a particularly comprehensive picture of the patterns of arrangements of apical dendrites which are most intensely stained with this antibody. Dual systems of apical dendrites arise from the polymorphic neurons of layer VI, on the one hand, and the pyramidal neurons of layers II-V, on the other. Terminal arborization of the former is concentrated principally at the interface of layers V and IV, while that of the latter is in the molecular layer. Apical dendrites of both systems are grouped into fascicles. In supragranular layers and in upper layer VI-lower layer V, where apical dendrites are most abundant, the fascicles coalesce into septa. These generate a honeycomb-like pattern, subdividing these cortical levels into columnar spaces of approximately 20-40 micron diameter. At the level of layer IV, where the number of apical dendrites is greatly reduced, the fascicles are isolated bundles. These bundles have the form of circular, elliptical or rectangular columns in the primary somatosensory, temporal and frontal regions, respectively. Those in the barrel field are preferentially concentrated in the sides of barrels and the interbarrel septa. The configurations of the dendritic fascicles, particularly the midcortical bundles, may conform to the spatial configuration of investing axons of interneurons.

  9. Learning RoboCup-Keepaway with Kernels

    CERN Document Server

    Jung, Tobias

    2012-01-01

    We apply kernel-based methods to solve the difficult reinforcement learning problem of 3vs2 keepaway in RoboCup simulated soccer. Key challenges in keepaway are the high-dimensionality of the state space (rendering conventional discretization-based function approximation like tilecoding infeasible), the stochasticity due to noise and multiple learning agents needing to cooperate (meaning that the exact dynamics of the environment are unknown) and real-time learning (meaning that an efficient online implementation is required). We employ the general framework of approximate policy iteration with least-squares-based policy evaluation. As underlying function approximator we consider the family of regularization networks with subset of regressors approximation. The core of our proposed solution is an efficient recursive implementation with automatic supervised selection of relevant basis functions. Simulation results indicate that the behavior learned through our approach clearly outperforms the best results obta...

  10. Minimal Apical Enlargement for Penetration of Irrigants to the Apical Third of Root Canal System: A Scanning Electron Microscope Study

    Science.gov (United States)

    Srikanth, P; Krishna, Amaravadi Gopi; Srinivas, Siva; Reddy, E Sujayeendranatha; Battu, Someshwar; Aravelli, Swathi

    2015-01-01

    Background: The aim of this study was to determine minimal apical enlargement for irrigant penetration into apical third of root canal system using scanning electron microscope (SEM). Materials and Methods: Distobuccal canals of 40 freshly extracted human maxillary first molar teeth were instrumented using crown-down technique. The teeth were divided into four test groups according to size of their master apical file (MAF) (#20, #25, #30, #35 0.06% taper), and two control groups. After final irrigation, removal of debris and smear layer from the apical third of root canals was determined under a SEM. Data was analyzed using Kruskal–Wallis and Mann–Whitney tests. Results: Smear layer removal in apical third for MAF size #30 was comparable with that of the control group (size #40). Conclusion: Minimal apical enlargement for penetration of irrigants to the apical third of root canal system is #30 size. PMID:26124608

  11. Importance of nuclear medicine diagnostics in CUP syndrome; Stellenwert der nuklearmedizinischen Diagnostik bei CUP-Syndrom

    Energy Technology Data Exchange (ETDEWEB)

    Winter, M.C.; Haberkorn, U.; Kratochwil, C. [Universitaetsklinikum Heidelberg, Abteilung fuer Nuklearmedizin, Heidelberg (Germany)

    2014-02-15

    The diagnostic work-up in patients with carcinoma of unknown primary (CUP) syndrome is extensive, highly time-consuming and cost-intensive and ultimately often fails to detect a primary site. In this context chest X-ray and computed tomography (CT) have been used as standard imaging modalities in CUP syndrome. Since the introduction of positron emission tomography (PET) evaluation of tumor vitality has become possible. Furthermore, PET-CT hybrid scanners allow the combination of functional and morphological imaging. Several meta-analyses have reported an additional overall detection rate between 24.5 % and 44 % by either PET or PET-CT. Metastatic localization (cervical versus extracervical) did not influence the performance. The sensitivity was usually high (> 80 %) but specificity was moderate ranging from 68 % to 88 % at best. If mentioned, the results obtained by fluorodeoxyglucose (FDG)-PET significantly changed the clinical management in approximately one third of the patients studied. In a direct comparison with PET alone, PET-CT did not depict significantly more primary tumors but was able to reduce false positive findings. To determine the real additional value of PET-CT in the diagnosis of CUP syndrome large prospective studies with more uniform inclusion criteria are needed. Despite the capabilities of FDG-PET-CT there is as yet no evidence that a potentially improved diagnostic algorithm is translated into a better patient outcome. Nevertheless, FDG-PET-CT should be performed in all CUP patients where conventional imaging failed to detect a primary site or the results are equivocal. In CUP patients with cervical lymph node metastases PET-CT should be carried out prior to panendoscopy to reduce the number of false negative biopsies. (orig.) [German] Die Diagnostik bei Carcinoma-of-unkown-primary(CUP)-Patienten ist meist umfangreich, sowohl sehr zeit- als auch kostenintensiv und verlaeuft dennoch haeufig frustran. Roentgenaufnahmen des Thorax und die

  12. Cup anemometer calibration: effect of flow velocity distribution

    Science.gov (United States)

    Piccato, A.; Spazzini, P. G.; Malvano, R.

    2011-10-01

    The effects of different working conditions and specifically of different velocity profiles on the output of a commercial cup anemometer were analysed experimentally. A simple mathematical model is also presented and provides results in line with the experiments. Results show that a cup anemometer with certain geometrical features can be calibrated through a rotating drag rig by correcting for the bias on the instrument output. The increase in uncertainty caused by this systematic correction was evaluated and applied to the results. The correction was validated by checking the compatibility of calibrations of a cup anemometer at the rotating rig and in a wind tunnel.

  13. Aerodynamic Analysis of Cup Anemometers Performance: The Stationary Harmonic Response

    Directory of Open Access Journals (Sweden)

    Santiago Pindado

    2013-01-01

    Full Text Available The effect of cup anemometer shape parameters, such as the cups’ shape, their size, and their center rotation radius, was experimentally analyzed. This analysis was based on both the calibration constants of the transfer function and the most important harmonic term of the rotor’s movement, which due to the cup anemometer design is the third one. This harmonic analysis represents a new approach to study cup anemometer performances. The results clearly showed a good correlation between the average rotational speed of the anemometer’s rotor and the mentioned third harmonic term of its movement.

  14. Multimodality imaging in apical hypertrophic cardiomyopathy

    Institute of Scientific and Technical Information of China (English)

    Rosario; Parisi; Francesca; Mirabella; Gioel; Gabrio; Secco; Rossella; Fattori

    2014-01-01

    Apical hypertrophic cardiomyopathy(AHCM) is a relatively rare morphologic variant of HCM in which the hypertrophy of myocardium is localized to the left ventricular apex. Symptoms of AHCM might vary from none to others mimic coronary artery disease including acute coronary syndrome, thus resulting in inappropriate hospitalization. Transthoracic echocardiography is the firstline imaging technique for the diagnosis of hypertrophic cardiomyopathies. However, when the hypertrophy of the myocardium is localized in the ventricular apex might results in missed diagnosis. Aim of this paper is to review the different imaging techniques used for the diagnosis of AHCM and their role in the detection and comprehension of this uncommon disease.

  15. "The Gammage Cup" as Utopian Literature for Children.

    Science.gov (United States)

    Russell, David L.

    1993-01-01

    Considers how Carol Kendall's fantasy novel, "The Gammage Cup," can be read as utopian literature for children. Provides a close reading and explication of Kendall's novel. Pronounces Kendall's novel a stimulating success providing hope for young readers. (HB)

  16. Watching the World Cup, one data point at a time

    OpenAIRE

    Silver, Curtis

    2014-01-01

    Sound the vuvuzelas, the World Cup is officially here. The biggest sporting event in the world is set to break all kinds of viewing records. Sporting in the digital world is just as much about stats as it is about the game itself. Enter Brandwatch. The social media analytics company has taken it upon itself to track social media statistics for the entire run of the World Cup with their new real-time data visualization tool.

  17. An investigation of home disadvantage in Davis Cup tennis.

    Science.gov (United States)

    Gayton, William F; Steinroeder, William; Bonnica, Corrine; Loignon, Andrew C

    2009-10-01

    Occurrence of the home disadvantage in Davis Cup tennis matches was examined by analyzing the outcome of Davis Cup finals matches from 1900 to 2007. There was no significant home disadvantage when Matches 1 and 2 were compared with Matches 4 and 5. However, there was a significant home disadvantage when Matches 1 and 2 were compared with Match 5. These findings are compared with those from earlier studies in which data from professional basketball and baseball were examined.

  18. Prevalence of disc cupping in non-glaucomatous eyes

    Directory of Open Access Journals (Sweden)

    José Pablo Chiappe

    2015-02-01

    Full Text Available This study assessed optic disc size and cupping, using a commercially available ophthalmoscope, in order to show norms of these values for clinical practice. Subjects were office-workers referred from their respective workplaces for a routine medical examination, which included eye examination. The optic disc size was classified as small, medium or large, for having a diameter 1.5 times (respectively the diameter of the ophthalmoscope's selected light spot on the posterior pole. The cupping was classified as the ratio of the vertical cupping diameter and the vertical disc diameter on a relative decimal scale from 0.0 to 1.0.This study included 184 subjects with a mean age of 40.5 ± 9.5 years; 149 (81% were males. Their mean ocular pressure was 12.4 ± 1.5 mmHg (range 10-17 mmHg. There was a high correlation between optic disc sizes and cupping in the right and left eyes (Pearson Correlation r = 0.866, p < 0.001; therefore, for simplicity only the data for right eyes are presented. According to our definition, the optic discs in these eyes comprised 27 (14.7% small, 141 (76.6% medium and 16 (8.7% large. The small optic discs were rarely cupped, and the large optic discs were always cupped. Optic disc cupping greater than 0.7 was rarely found and should be suspect of glaucoma. Clinical doctors should be aware of this and refer those subjects with abnormal cupping to the specialist.

  19. Distance constant of the Risø cup anemometer

    OpenAIRE

    Kristensen, L.; Frost Hansen, O.

    2002-01-01

    The theory for cup-anemometer dynamics is presented in some detail and two methods of obtaining the distance constant lo are discussed. The first method is based on wind tunnel measurements: with a constant wind speed the cup anemometer is released from alocked position of the rotor and the increasing rotation rate recorded. It is concluded that the rapid increase in rotation rate makes the method very inaccurate. The second method consists of an analysis of turbulent, atmospheric of wind spe...

  20. Manipulating Tournaments in Cup and Round Robin Competitions

    CERN Document Server

    Russell, Tyrel; 10.1007/978-3-642-04428-1_3

    2009-01-01

    In sports competitions, teams can manipulate the result by, for instance, throwing games. We show that we can decide how to manipulate round robin and cup competitions, two of the most popular types of sporting competitions in polynomial time. In addition, we show that finding the minimal number of games that need to be thrown to manipulate the result can also be determined in polynomial time. Finally, we show that there are several different variations of standard cup competitions where manipulation remains polynomial.

  1. Splash-cup plants accelerate raindrops to disperse seeds.

    Science.gov (United States)

    Amador, Guillermo J; Yamada, Yasukuni; McCurley, Matthew; Hu, David L

    2013-02-01

    The conical flowers of splash-cup plants Chrysosplenium and Mazus catch raindrops opportunistically, exploiting the subsequent splash to disperse their seeds. In this combined experimental and theoretical study, we elucidate their mechanism for maximizing dispersal distance. We fabricate conical plant mimics using three-dimensional printing, and use high-speed video to visualize splash profiles and seed travel distance. Drop impacts that strike the cup off-centre achieve the largest dispersal distances of up to 1 m. Such distances are achieved because splash speeds are three to five times faster than incoming drop speeds, and so faster than the traditionally studied splashes occurring upon horizontal surfaces. This anomalous splash speed is because of the superposition of two components of momentum, one associated with a component of the drop's motion parallel to the splash-cup surface, and the other associated with film spreading induced by impact with the splash-cup. Our model incorporating these effects predicts the observed dispersal distance within 6-18% error. According to our experiments, the optimal cone angle for the splash-cup is 40°, a value consistent with the average of five species of splash-cup plants. This optimal angle arises from the competing effects of velocity amplification and projectile launching angle.

  2. Apical-dominant particle swarm optimization

    Institute of Scientific and Technical Information of China (English)

    Zhihua Cui; Xingjuan Cai; Jianchao Zeng; Guoji Sun

    2008-01-01

    Particle swarm optimization (PSO) is a new stochastic population-based search methodology by simulating the animal social behaviors such as birds flocking and fish schooling.Many improvements have been proposed within the framework of this biological assumption.However,in this paper,the search pattern of PSO is used to model the branch growth process of natural plants.It provides a different poten-tial manner from artificial plant.To illustrate the effectiveness of this new model,apical dominance phenomenon is introduced to construct a novel variant by emphasizing the influence of the phototaxis.In this improvement,the population is divided into three different kinds of buds associated with their performances.Furthermore,a mutation strategy is applied to enhance the ability escaping from a local optimum.Sim-ulation results demonstrate good performance of the new method when solving high-dimensional multi-modal problems.

  3. Musik sebagai Wujud Eksistensi dalam Gelaran World Cup

    Directory of Open Access Journals (Sweden)

    Michael HB Raditya

    2014-11-01

    Full Text Available We Are One atau “Ole Ola” merupakan lagu resmi dari gelaran World Cup. Setiap World Cupmempunyai lagu resminya ditiap gelarannya. Dalam keberlangsungannya, setiap lagu world cupmembutuhkan pertimbangan dalam pembentukannya. Aspek-aspek seperti budaya, sosial, politikdan lainya menjadi alasan penting dalam pembentukannya. Pembentukan Ole Ola didasarkan padaproses hibriditas budaya lokal dan global. Perpaduan samba dan hip hop menjadi variant dalampembentukannya. Perpaduan tersebut membentuk identitas untuk lagu itu sendiri, dan untuk gelaranworld cup. Eksistensi dari lagu sehingga makin terasa karena perpaduan yang membentuk identitas.Terlebih lagu tersebut tercipta tidak hanya karena gelaran, tetapi mempunyai fungsi dan guna untukmasyarakat. Musik sebagai media dalam mengkonstruksi pesan atas kepentingan. Musik membentukidentitas, dan mempunyai eksistensi dalam keberlangsungannya. Musik tidak lagi hanya berfungsisebagai musik saja, tetapi musik mempunyai peran dalam pembentukan identitas dan menjamineksistensi. Music as a form of Existance in the World Cup Performance. We are one or Ole Ola is the officialsong of the world cup performance. Every world cup has its official song in each event. In its development ofexistance, every song in world cup needs requires of consideration for creating process. Aspects such as cultural,social, politics and others become the important reason for creation. The creating proses of Ole Ola song isbased on the local and global cultural hybridity. The combination of samba and hip hop is a primary varianton creating process. The combination creates an identity for the song itself, and for world cup identity. Theexistance of Ole Ola is stronger because the combination may create the new identity. Moreover, the songcreated is not only for the event, but also has a function and purpose to society. Music is as a medium inconstructing the messages of interest. Music creates an identity, and has an existance in its

  4. Induction of differentiation in the shoot apical meristem by transient overexpression of a retinoblastoma-related protein

    OpenAIRE

    Wyrzykowska, Joanna; Schorderet, Martine; Pien, Stéphane; Gruissem, Wilhelm; Fleming, Andrew J.

    2007-01-01

    The shoot apical meristem contains cells that undergo continual growth and division to generate the building blocks for the aerial portion of the plant. As cells leave the meristem, they undergo differentiation to form specific cell types. Most notably, heterotrophic cells of the meristem rapidly gain autotrophic capability by synthesis and assembly of components of the chloroplast. At the same time, cells undergo enlargement via vacuolation. Despite significant advances in the characterizati...

  5. New is the well-forgotten old: The use of dry cupping in musculoskeletal medicine.

    Science.gov (United States)

    Rozenfeld, Evgeni; Kalichman, Leonid

    2016-01-01

    Cupping is an ancient technique used in treating pain and various disorders. Different techniques have been developed over time, however, applying a cup to create suction over a painful area, is common to all. Dry or fire cupping, used on the intact skin, leaves bluish circular hematomas. Recently, interest in cupping has re-emerged and subsequently, several studies have begun to investigate the mechanisms of cupping therapy. Mechanically, cupping increases blood circulation, whereas physiologically it activates the immune system and stimulates the mechanosensitive fibers, thus leading to a reduction in pain. There is initial scientific evidence that dry cupping is able to reduce musculoskeletal pain. Since cupping is an inexpensive, noninvasive and low-risk (if performed by a trained practitioner) therapeutic modality, we believe that it should be included in the arsenal of musculoskeletal medicine. It is essential to perform additional studies clarifying the biological mechanism and clinical effects of cupping.

  6. Apical Hypertrophic Cardiomyopathy in Association with PulmonaryArtery Hypertension

    Directory of Open Access Journals (Sweden)

    Mehdi Peighambari

    2012-09-01

    Full Text Available Apical Hypertrophic Cardiomyopathy is an uncommon condition constituting 1% -2% of the cases with Hypertrophic Cardiomyopathy (HCM diagnosis. We interestingly report two patients with apical hypertrophic cardiomyopathy in association with significant pulmonary artery hypertension without any other underlying reason for pulmonary hypertension. The patients were assessed by echocardiography, cardiac catheterization and pulmonary function parameters study.

  7. Reversible transient apical ballooning syndrome with coronary lesions

    Institute of Scientific and Technical Information of China (English)

    Yunshan Cao; Min Zhang; Xiang Li; Ping Xie; Lynn Cronin

    2009-01-01

    Transient apical ballooning syndrome(Tako-Tsubo syndrome or ampulla cardiomyopathy) occurs predominantly in women over 60 years of age with a history of recent physical or psychological stress. We present a case of a male patient with reversible transient apical ballooning syndrome with significant coronary lesions and other ECG changes that did not explain the clinical symptoms.

  8. Apical Ballooning Syndrome: A Complication of Dual Chamber Pacemaker Implantation

    Science.gov (United States)

    Abu Sham'a, Raed A. H; Asher, Elad; Luria, David; Berger, Michael; Glikson, Michael

    2009-01-01

    Apical ballooning is a cardiac syndrome (Takotsubo Cardiomyopathy) described as a typical form of acute transient left ventricular dysfunction. While its onset has often been associated with emotionally or physically stressful situations, it has an overall favorable prognosis. We describe here a case of transient apical ballooning following permanent pacemaker implantation. PMID:19652736

  9. Apical entry channels in calcium-transporting epithelia.

    Science.gov (United States)

    Peng, Ji-Bin; Brown, Edward M; Hediger, Matthias A

    2003-08-01

    The identification of the apical calcium channels CaT1 and ECaC revealed the key molecular mechanisms underlying apical calcium entry in calcium-transporting epithelia. These channels are regulated directly or indirectly by vitamin D and dietary calcium and undergo feedback control by intracellular calcium, suggesting their rate-limiting roles in transcellular calcium transport.

  10. Development of cup shaped microneedle array for transdermal drug delivery.

    Science.gov (United States)

    Vinayakumar, Kadayar B; Hegde, Gopal M; Ramachandra, Subbaraya G; Nayak, Mangalore M; Dinesh, Narasimhian S; Rajanna, Konandur

    2015-06-08

    Microneedle technology is one of the attractive methods in transdermal drug delivery. However, the clinical applications of this method are limited owing to: complexity in the preparation of multiple coating solutions, drug leakage while inserting the microneedles into the skin and the outer walls of the solid microneedle can hold limited quantity of drug. Here, the authors present the fabrication of an array of rectangular cup shaped silicon microneedles, which provide for reduced drug leakage resulting in improvement of efficiency of drug delivery and possibility of introducing multiple drugs. The fabricated solid microneedles with rectangular cup shaped tip have a total height of 200 μm. These cup shaped tips have dimensions: 60 × 60 μm (length × breadth) with a depth of 60 μm. The cups are filled with drug using a novel in-house built drop coating system. Successful drug dissolution was observed when the coated microneedle was used on mice. Also, using the above method, it is possible to fill the cups selectively with different drugs, which enables simultaneous multiple drug delivery.

  11. Octopus-like suction cups: from natural to artificial solutions.

    Science.gov (United States)

    Tramacere, F; Follador, M; Pugno, N M; Mazzolai, B

    2015-05-13

    Octopus suckers are able to attach to all nonporous surfaces and generate a very strong attachment force. The well-known attachment features of this animal result from the softness of the sucker tissues and the surface morphology of the portion of the sucker that is in contact with objects or substrates. Unlike artificial suction cups, octopus suckers are characterized by a series of radial grooves that increase the area subjected to pressure reduction during attachment. In this study, we constructed artificial suction cups with different surface geometries and tested their attachment performances using a pull-off setup. First, smooth suction cups were obtained for casting; then, sucker surfaces were engraved with a laser cutter. As expected, for all the tested cases, the engraving treatment enhanced the attachment performance of the elastomeric suction cups compared with that of the smooth versions. Moreover, the results indicated that the surface geometry with the best attachment performance was the geometry most similar to octopus sucker morphology. The results obtained in this work can be utilized to design artificial suction cups with higher wet attachment performance.

  12. Dielectric elastomer actuators for octopus inspired suction cups.

    Science.gov (United States)

    Follador, M; Tramacere, F; Mazzolai, B

    2014-09-25

    Suction cups are often found in nature as attachment strategy in water. Nevertheless, the application of the artificial counterpart is limited by the dimension of the actuators and their usability in wet conditions. A novel design for the development of a suction cup inspired by octopus suckers is presented. The main focus of this research was on the modelling and characterization of the actuation unit, and a first prototype of the suction cup was realized as a proof of concept. The actuation of the suction cup is based on dielectric elastomer actuators. The presented device works in a wet environment, has an integrated actuation system, and is soft. The dimensions of the artificial suction cups are comparable to proximal octopus suckers, and the attachment mechanism is similar to the biological counterpart. The design approach proposed for the actuator allows the definition of the parameters for its development and for obtaining a desired pressure in water. The fabricated actuator is able to produce up to 6 kPa of pressure in water, reaching the maximum pressure in less than 300 ms.

  13. Classification of operational characteristics of commercial cup-anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Friis Pedersen, T.; Schmidt Paulsen, U. [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark)

    1999-03-01

    The present classification of cup-anemometers is based on a procedure for classification of operational characteristics of cup-anemometers that was proposed at the EWEC `97 conference in Dublin 1997. Three definitions of wind speed are considered. The average longitudinal wind speed (ID), the average horizontal wind speed (2D) and the average vector wind speed (3D). The classification is provided in these terms, and additionally, the turbulence intensities, which are defined from the same wind speed definitions. The commercial cup-anemometers have all been calibrated in wind tunnel for the normal calibrations and angular characteristics. Friction was measured by blywheel testing, where the surrounding temperatures were varied over a wide range. The characteristics of the cup-anemometers have been fitted to the heuristic dynamic model, and the response has been calculated in time domain for prescribed ranges of external operational conditions. The results are presented in ranges of maximum deviations of `measured` average wind speed. For each definition of wind speed and turbulence intensity, the cup-anemometers are ranked according to the most precise instrument. Finally, the most important systematic error sources are commented. (au)

  14. Mathematical analysis of the effect of rotor geometry on cup anemometer response.

    Science.gov (United States)

    Sanz-Andrés, Ángel; Pindado, Santiago; Sorribes-Palmer, Félix

    2014-01-01

    The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied. The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction. The comparison with the experimental data indicates a nonuniform distribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

  15. Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

    Directory of Open Access Journals (Sweden)

    Ángel Sanz-Andrés

    2014-01-01

    Full Text Available The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied. The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction. The comparison with the experimental data indicates a nonuniform distribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

  16. Efficacy of Biodentine as an Apical Plug in Nonvital Permanent Teeth with Open Apices: An In Vitro Study

    Directory of Open Access Journals (Sweden)

    Mehmet Bani

    2015-01-01

    Full Text Available The aim of this study was to evaluate the apical microleakage of Biodentine and MTA orthograde apical plugs and to compare the effect of thickness of these biomaterials on their sealing ability. A total of eighty maxillary anterior teeth were used. The apices were removed by cutting with a diamond disc (Jota, Germany 2 mm from the apical root end in an attempt to standardize the working length of all specimens to 15 ± 1 mm. Both materials were placed in 1–4 mm thickness as apical plugs root canal. Root canal leakage was evaluated by the fluid filtration technique. One-way ANOVA was used in order to determine normality of dispersal distribution of parameters; thereafter, results were analyzed by Kolmogorov-Smirnov test. Overall, between microleakage values of MTA and Biodentine regardless of apical plug thickness, no difference was observed. In terms of plug thickness, a statistically significant difference was observed between the subgroups of MTA and Biodentine (p<0.05. The apical sealing ability of Biodentine was comparable to MTA at any apical plug thickness.

  17. Barreled-beer cup vendor (FSCB-100); Tarunama cup benda (FSCB-100)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    Development was made on an automatic vending machine to vend barreled beer in a cup with stabilized quality. Its major features are as follows: (1) a double cooling system using water cooling and air cooling simultaneously was adopted to make it possible to maintain the beer freshness and pour it stably; (2) a full-automatic gas pressure control system was adopted to detect beer temperature, and adjust the pressure to adequate level; (3) an automatic rinsing system was adopted that has made troublesome pipe rinsing possible with just pressing a button to simplify maintenance work; and (4) a new automatic two-barrel changeover mechanism was developed to achieve first-in-first-out of barrels, control the freshness, suppress bubble generation, and reduce beer loss quantity. (translated by NEDO)

  18. A novel cupping-assisted plasma treatment for skin disinfection

    Science.gov (United States)

    Xiong, Zilan; Graves, David B.

    2017-02-01

    A novel plasma treatment method/plasma source called cupping-assisted plasma treatment/source for skin disinfection is introduced. The idea combines ancient Chinese ‘cupping’ technology with plasma sources to generate active plasma inside an isolated, pressure-controlled chamber attached to the skin. Advantages of lower pressure include reducing the threshold voltage for plasma ignition and improving the spatial uniformity of the plasma treatment. In addition, with reduced pressure inside the cup, skin pore permeability might be increased and it improves attachment of the plasma device to the skin. Moreover, at a given pressure, plasma-generated active species are restricted inside the cup, raising local reactive species concentration and enhancing the measured surface disinfection rate. A surface micro-discharge (SMD) device is used as an example of a working plasma source. We report discharge characteristics and disinfection efficiency as a function of pressure and applied voltage.

  19. Characterisation and classification of RISØ P2546 cup anemometer

    DEFF Research Database (Denmark)

    Friis Pedersen, Troels

    2003-01-01

    The characteristics of the RISØ P2546 cup anemometer were investigated in detail by wind tunnel and laboratory tests. The characteristics include accredited calibration, tilt response measurements for tilt angles between -40° to 40°, gust responsemeasurements at 8m/s and turbulence intensities...... of 10%, 16% and 23%, step response measurements at step wind speeds 3,7, 8, 11,9 and 15,2m/s, measurement of torque characteristics at 8m/s, rotor inertia measurements and measurements of friction ofbearings at temperatures -20°C to 40°C. Characteristics were fitted to a time domain cup anemometer model....... The characteristics were transformed into the CLASSCUP classification scheme, and were related to the cup anemometer requirements in the Danishcertification system and in the IEC 61400-121 Committee Draft....

  20. Characterisation and classification of RISØ P2546 cup anemometer

    DEFF Research Database (Denmark)

    Friis Pedersen, Troels

    2004-01-01

    The characteristics of the RISØ P2546 cup anemometer were investigated in detail by wind tunnel and laboratory tests. The characteristics include accredited calibration, tilt response measurements for tilt angles between -40° to 40°, gust responsemeasurements at 8m/s and turbulence intensities...... of 10%, 16% and 23%, step response measurements at step wind speeds 3,7, 8, 11,9 and 15,2m/s, measurement of torque characteristics at 8m/s, rotor inertia measurements and measurements of friction ofbearings at temperatures -20°C to 40°C. Characteristics were fitted to a time domain cup anemometer model....... The characteristics were transformed into the CLASSCUP classification scheme, and were related to the cup anemometer requirements in the Danishcertification system and in the IEC 61400-121 Committee Draft....

  1. Characterisation and classification of RISOe P2546 cup anemometer

    Energy Technology Data Exchange (ETDEWEB)

    Friis Pedersen, T.

    2003-04-01

    The characteristics of the RISOe P2546 cup anemometer were investigated in detail by wind tunnel and laboratory tests. The characteristics include accredited calibration, tilt response measurements for tilt angles between -40 degC to 40 degC, gust response measurements at 8m/s and turbulence intensities of 10%, 16% and 23%, step response measurements at step wind speeds 3,7, 8, 11,9 and 15,2m/s, measurement of torque characteristics at 8m/s, rotor inertia measurements and measurements of friction of bearings at temperatures -20 degC to 40 degC. Characteristics were fitted to a time domain cup anemometer model. The characteristics were transformed into the CLASSCUP classification scheme, and were related to the cup anemometer requirements in the Danish certification system and in the IEC 61400-121 Committee Draft. (au)

  2. Treatment of Obstinate Diseases by Acupuncture and Cupping

    Institute of Scientific and Technical Information of China (English)

    杨容

    2001-01-01

    @@Acupuncture treatment integrated with cupping for enhancing the therapeutic effect is a technique in Yang's school of acupuncture carried forward from generation to generation. The author's grandfather created Yang's shallow puncturing and cupping therapy to enhance the effect of promoting blood flow and removing blood stasis in the light of his clinical experience. In this therapy, the gentle puncturing and heavy tapping are carried out with the seven-star needle until light bleeding occurs, followed by drawing out of pituita or stagnant blood and coagula by cupping, in an attempt to promote tissue regeneration by removing blood stasis for promoting the flow of qi and blood in the meridians. The therapy has been developed by Dr. Yang Yifang (the author's father) in clinical practice over the past six decades. Satisfactory therapeutic results have been obtained in clinical practice, which are introduced with examples below.

  3. Slit disk for modified faraday cup diagnostic for determining power density of electron and ion beams

    Science.gov (United States)

    Teruya, Alan T.; Elmer; John W.; Palmer, Todd A.

    2011-03-08

    A diagnostic system for characterization of an electron beam or an ion beam includes an electrical conducting disk of refractory material having a circumference, a center, and a Faraday cup assembly positioned to receive the electron beam or ion beam. At least one slit in the disk provides diagnostic characterization of the electron beam or ion beam. The at least one slit is located between the circumference and the center of the disk and includes a radial portion that is in radial alignment with the center and a portion that deviates from radial alignment with the center. The electron beam or ion beam is directed onto the disk and translated to the at least one slit wherein the electron beam or ion beam enters the at least one slit for providing diagnostic characterization of the electron beam or ion beam.

  4. Earliest directly-dated human skull-cups.

    Directory of Open Access Journals (Sweden)

    Silvia M Bello

    Full Text Available BACKGROUND: The use of human braincases as drinking cups and containers has extensive historic and ethnographic documentation, but archaeological examples are extremely rare. In the Upper Palaeolithic of western Europe, cut-marked and broken human bones are widespread in the Magdalenian (∼15 to 12,000 years BP and skull-cup preparation is an element of this tradition. PRINCIPAL FINDINGS: Here we describe the post-mortem processing of human heads at the Upper Palaeolithic site of Gough's Cave (Somerset, England and identify a range of modifications associated with the production of skull-cups. New analyses of human remains from Gough's Cave demonstrate the skilled post-mortem manipulation of human bodies. Results of the research suggest the processing of cadavers for the consumption of body tissues (bone marrow, accompanied by meticulous shaping of cranial vaults. The distribution of cut-marks and percussion features indicates that the skulls were scrupulously 'cleaned' of any soft tissues, and subsequently modified by controlled removal of the facial region and breakage of the cranial base along a sub-horizontal plane. The vaults were also 'retouched', possibly to make the broken edges more regular. This manipulation suggests the shaping of skulls to produce skull-cups. CONCLUSIONS: Three skull-cups have been identified amongst the human bones from Gough's Cave. New ultrafiltered radiocarbon determinations provide direct dates of about 14,700 cal BP, making these the oldest directly dated skull-cups and the only examples known from the British Isles.

  5. Maxillary first premolars: I. Morphology of the apical constriction

    Institute of Scientific and Technical Information of China (English)

    Daming Wu; Younong Wu; Ming Hu

    2009-01-01

    Objective: To investigated the apical constriction morphology of maxillary first premolars in the Chinese population. Methods: Eighty recently extracted human maxillary first premolars from a native Chinese population were used. The number and shape of apical constrictions were recorded under a dental operating microscope (DOM) at 12.5X2.5 magnification. After access preparation, a new K-file was inserted into the canal until the tip of the file was just seen at the apical constriction under the DOM. The teeth with files in the canals were X-rayed from a mesiodistal direction using a direct digital radiography (DDR) system, and the distance between the file tip and the center of radiographic apex was directly measured from the computer screen using DDR measurement software. Results: The percentage of teeth with an apical constriction was 78.5% (102/130). The most common apical constriction shapes were oval (55.9%) and round (35.3%). The mean distance between the apical constriction and the anatomical tip of the root was 0.61 mm, and 84.3% (86/102) were within 1 mm. Conclusion: The most common shape of an apical constriction was oval or round, and the distance to the apex was mostly within 1 mm, indicating that root canal therapy should stop 1 mm from the radiographic apex.

  6. Virus interaction with the apical junctional complex.

    Science.gov (United States)

    Gonzalez-Mariscal, Lorenza; Garay, Erika; Lechuga, Susana

    2009-01-01

    In order to infect pathogens must breach the epithelial barriers that separate the organism from the external environment or that cover the internal cavities and ducts of the body. Epithelia seal the passage through the paracellular pathway with the apical junctional complex integrated by tight and adherens junctions. In this review we describe how viruses like coxsackie, swine vesicular disease virus, adenovirus, reovirus, feline calcivirus, herpes viruses 1 and 2, pseudorabies, bovine herpes virus 1, poliovirus and hepatitis C use as cellular receptors integral proteins present at the AJC of epithelial cells. Interaction with these proteins contributes in a significant manner in defining the particular tropism of each virus. Besides these proteins, viruses exhibit a wide range of cellular co-receptors among which proteins present in the basolateral cell surface like integrins are often found. Therefore targeting proteins of the AJC constitutes a strategy that might allow viruses to bypass the physical barrier that blocks their access to receptors expressed on the basolateral surface of epithelial cells.

  7. Auxin at the Shoot Apical Meristem

    Science.gov (United States)

    Vernoux, Teva; Besnard, Fabrice; Traas, Jan

    2010-01-01

    Plants continuously generate new tissues and organs through the activity of populations of undifferentiated stem cells, called meristems. Here, we discuss the so-called shoot apical meristem (SAM), which generates all the aerial parts of the plant. It has been known for many years that auxin plays a central role in the functioning of this meristem. Auxin is not homogeneously distributed at the SAM and it is thought that this distribution is interpreted in terms of differential gene expression and patterned growth. In this context, auxin transporters of the PIN and AUX families, creating auxin maxima and minima, are crucial regulators. However, auxin transport is not the only factor involved. Auxin biosynthesis genes also show specific, patterned activities, and local auxin synthesis appears to be essential for meristem function as well. In addition, auxin perception and signal transduction defining the competence of cells to react to auxin, add further complexity to the issue. To unravel this intricate signaling network at the SAM, systems biology approaches, involving not only molecular genetics but also live imaging and computational modeling, have become increasingly important. PMID:20452945

  8. Cup products in Hopf cyclic cohomology via cyclic modules I

    CERN Document Server

    Rangipour, Bahram

    2007-01-01

    This is the first one in a series of two papers on the continuation of our study in cup products in Hopf cyclic cohomology. In this note we construct cyclic cocycles of algebras out of Hopf cyclic cocycles of algebras and coalgebras. In the next paper we consider producing Hopf cyclic cocycle from "equivariant" Hopf cyclic cocycles. Our approach in both situations is based on (co)cyclic modules and bi(co)cyclic modules together with Eilenberg-Zilber theorem which is different from the old definition of cup products defined via traces and cotraces on DG algebras and coalgebras.

  9. DTU-team vinder kategori i VentureCup 2015

    DEFF Research Database (Denmark)

    Lassen, Lisbeth

    2015-01-01

    Teamet EDS, Ecological Disposal Systems, har vundet kategorien Cleantech & Environment i VentureCup’s årlige konkurrence StartUp Competition, og som vinder går holdet videre sammen med de andre vindere til University Startup World Cup som afholdes i København i midten af september.......Teamet EDS, Ecological Disposal Systems, har vundet kategorien Cleantech & Environment i VentureCup’s årlige konkurrence StartUp Competition, og som vinder går holdet videre sammen med de andre vindere til University Startup World Cup som afholdes i København i midten af september....

  10. Elastoplastic cup model for cement-based materials

    Directory of Open Access Journals (Sweden)

    Yan ZHANG

    2010-03-01

    Full Text Available Based on experimental data obtained from triaxial tests and a hydrostatic test, a cup model was formulated. Two plastic mechanisms, respectively a deviatoric shearing and a pore collapse, are taken into account. This model also considers the influence of confining pressure. In this paper, the calibration of the model is detailed and numerical simulations of the main mechanical behavior of cement paste over a large range of stress are described, showing good agreement with experimental results. The case study shows that this cup model has extensive applicability for cement-based materials and other quasi-brittle and high-porosity materials in a complex stress state.

  11. Calibration and Lag of a Friez Type Cup Anemometer

    Science.gov (United States)

    Pinkerton, Robert M

    1930-01-01

    Tests on a Friez type cup anemometer have been made in the variable density wind tunnel of the Langley Memorial Aeronautical Laboratory to calibrate the instrument and to determine its suitability for velocity measurements of wind gusts. The instrument was calibrated against a Pitot-static tube placed directly above the anemometer at air densities corresponding to sea level, and to an altitude of approximately 6000 feet. Air-speed acceleration tests were made to determine the lag in the instrument reading. The calibration results indicate that there should be an altitude correction. It is concluded that the cup anemometer is too sluggish for velocity measurements of wind gusts.

  12. Sectoral labour market effects of the 2006 FIFA World Cup

    DEFF Research Database (Denmark)

    Feddersen, Arne; Maennig, Wolfgang

    2012-01-01

    Using the case of the 2006 FIFA World Cup, this study is the first to test the employment effects of a mega-sporting event on the basis of data that combines both regional and sectoral data. It is also the first study of sporting events to use a semi-parametric test method. Earlier studies on the...... on the World Cup could hardly identify any employment effects. In contrast, we find a small but significant positive employment effect on the hospitality sector. © 2012 Elsevier B.V....

  13. Bony change of apical lesion healing process using fractal analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Min; Park, Hyok; Jeong, Ho Gul; Kim, Kee Deog; Park, Chang Seo [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2005-06-15

    To investigate the change of bone healing process after endodontic treatment of the tooth with an apical lesion by fractal analysis. Radiographic images of 35 teeth from 33 patients taken on first diagnosis, 6 months, and 1 year after endodontic treatment were selected. Radiographic images were taken by JUPITER computerized Dental X-ray System. Fractal dimensions were calculated three times at each area by Scion Image PC program. Rectangular region of interest (30 x 30) were selected at apical lesion and normal apex of each image. The fractal dimension at apical lesion of first diagnosis (L{sub 0}) is 0.940 {+-} 0.361 and that of normal area (N{sub 0}) is 1.186 {+-} 0.727 (p<0.05). Fractal dimension at apical lesion of 6 months after endodontic treatment (L{sub 1}) is 1.076 {+-} 0.069 and that of normal area (N{sub 1}) is 1.192 {+-} 0.055 (p<0.05). Fractal dimension at apical lesion of 1 year after endodontic treatment (L{sub 2}) is 1.163 {+-} 0.074 and that of normal area (N{sub 2}) is 1.225 {+-} 0.079 (p<0.05). After endodontic treatment, the fractal dimensions at each apical lesions depending on time showed statistically significant difference. And there are statistically significant different between normal area and apical lesion on first diagnosis, 6 months after, 1 year after. But the differences were grow smaller as time flows. The evaluation of the prognosis after the endodontic treatment of the apical lesion was estimated by bone regeneration in apical region. Fractal analysis was attempted to overcome the limit of subjective reading, and as a result the change of the bone during the healing process was able to be detected objectively and quantitatively.

  14. Mode-bifurcation upon pouring water into a cup that depends on the shape of the cup

    Science.gov (United States)

    Nakata, Satoshi; Yamada, Akiko; Kitahata, Hiroyuki

    2005-05-01

    Mode-bifurcation that included hysteresis was investigated when water was poured into a cup via a water faucet. Three modes, i.e., accumulation flow (mode I), scattering flow (mode II), and open and shut oscillatory flow (mode III), could be produced by laterally changing the distance between the center of the cup and the landing point of water poured at a constant flow rate. Hysteresis in mode-bifurcation was observed when the distance was changed depending on the initial location of the water poured into the cup. Pendulum flow was also observed when water was poured into a shallow cell. The essential features of this mode-switching were reproduced by a numerical calculation as a function of the landing point of the poured water using two-variable (the size of the water hollow and the pressure on the water surface) differential equations that included the nature of reversed flow.

  15. A Confirmed Case of Toxic Shock Syndrome Associated with the Use of a Menstrual Cup

    Directory of Open Access Journals (Sweden)

    Michael A Mitchell

    2015-01-01

    Full Text Available Menstrual cups have been reported to be an acceptable substitute for tampons. These flexible cups have also been reported to provide a sustainable solution to menstrual management, with modest cost savings and no significant health risk.

  16. Acetabular cup position and risk of dislocation in primary total hip arthroplasty

    DEFF Research Database (Denmark)

    Seagrave, Kurt G; Troelsen, Anders; Malchau, Henrik;

    2016-01-01

    Background and purpose - Hip dislocation is one of the most common complications following total hip arthroplasty (THA). Several factors that affect dislocation have been identified, including acetabular cup positioning. Optimal values for cup inclination and anteversion are debatable. We perform...

  17. Efficacy of Biodentine as an Apical Plug in Nonvital Permanent Teeth with Open Apices: An In Vitro Study.

    Science.gov (United States)

    Bani, Mehmet; Sungurtekin-Ekçi, Elif; Odabaş, Mesut Enes

    2015-01-01

    The aim of this study was to evaluate the apical microleakage of Biodentine and MTA orthograde apical plugs and to compare the effect of thickness of these biomaterials on their sealing ability. A total of eighty maxillary anterior teeth were used. The apices were removed by cutting with a diamond disc (Jota, Germany) 2 mm from the apical root end in an attempt to standardize the working length of all specimens to 15 ± 1 mm. Both materials were placed in 1-4 mm thickness as apical plugs root canal. Root canal leakage was evaluated by the fluid filtration technique. One-way ANOVA was used in order to determine normality of dispersal distribution of parameters; thereafter, results were analyzed by Kolmogorov-Smirnov test. Overall, between microleakage values of MTA and Biodentine regardless of apical plug thickness, no difference was observed. In terms of plug thickness, a statistically significant difference was observed between the subgroups of MTA and Biodentine (p Biodentine was comparable to MTA at any apical plug thickness.

  18. A Novel Method for Assessment of Polyethylene Liner Wear in Radiopaque Tantalum Acetabular Cups

    DEFF Research Database (Denmark)

    Troelsen, Anders; Greene, Meridith E; Ayers, David C

    2015-01-01

    Conventional radiostereometric analysis (RSA) for wear is not possible in patients with tantalum cups. We propose a novel method for wear analysis in tantalum cups. Wear was assessed by gold standard RSA and the novel method in total hip arthroplasty patients enrolled in a randomized controlled...... to the gold standard in titanium cups. The novel method offered accurate assessment and is a viable solution for assessment of wear in studies with tantalum cups....

  19. Clinical research evidence of cupping therapy in China: a systematic literature review

    OpenAIRE

    Wang Qian; Shang Yongmei; Dong Shangjuan; Li Xun; Han Mei; Cao Huijuan; Xu Shu; Liu Jianping

    2010-01-01

    Abstract Background Though cupping therapy has been used in China for thousands of years, there has been no systematic summary of clinical research on it. This review is to evaluate the therapeutic effect of cupping therapy using evidence-based approach based on all available clinical studies. Methods We included all clinical studies on cupping therapy for all kinds of diseases. We searched six electronic databases, all searches ended in December 2008. We extracted data on the type of cupping...

  20. An overview of systematic reviews of clinical evidence for cupping therapy

    OpenAIRE

    Huijuan Cao; Mei Han; Xiaoshu Zhu; Jianping Liu

    2015-01-01

    Background: As a traditional treatment method, cupping therapy is widely used in Asian countries. This overview of systematic reviews (SRs) investigated the effectiveness and safety of cupping therapy through an evidence-based approach. Methods: SRs that assessed the effectiveness of cupping therapy for any type of disease were searched through 6 electronic databases. Target diseases, cupping methods, numbers and types of included studies, quality of included trials, main results (includin...

  1. Surgery for women with apical vaginal prolapse.

    Science.gov (United States)

    Maher, Christopher; Feiner, Benjamin; Baessler, Kaven; Christmann-Schmid, Corina; Haya, Nir; Brown, Julie

    2016-10-01

    Apical vaginal prolapse is a descent of the uterus or vaginal vault (post-hysterectomy). Various surgical treatments are available and there are no guidelines to recommend which is the best. To evaluate the safety and efficacy of any surgical intervention compared to another intervention for the management of apical vaginal prolapse. We searched the Cochrane Incontinence Group's Specialised Register of controlled trials, which contains trials identified from the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, ClinicalTrials.gov, WHO ICTRP and handsearching of journals and conference proceedings (searched July 2015) and ClinicalTrials.gov (searched January 2016). We included randomised controlled trials (RCTs). We used Cochrane methods. Our primary outcomes were awareness of prolapse, repeat surgery and recurrent prolapse (any site). We included 30 RCTs (3414 women) comparing surgical procedures for apical vaginal prolapse. Evidence quality ranged from low to moderate. Limitations included imprecision, poor methodological reporting and inconsistency. Vaginal procedures versus sacral colpopexy (six RCTs, n = 583; one to four-year review). Awareness of prolapse was more common after vaginal procedures (risk ratio (RR) 2.11, 95% confidence interval (CI) 1.06 to 4.21, 3 RCTs, n = 277, I(2) = 0%, moderate-quality evidence). If 7% of women are aware of prolapse after sacral colpopexy, 14% (7% to 27%) are likely to be aware after vaginal procedures. Repeat surgery for prolapse was more common after vaginal procedures (RR 2.28, 95% CI 1.20 to 4.32; 4 RCTs, n = 383, I(2) = 0%, moderate-quality evidence). The confidence interval suggests that if 4% of women require repeat prolapse surgery after sacral colpopexy, between 5% and 18% would require it after vaginal procedures.We found no conclusive evidence that vaginal procedures increaserepeat surgery for stress urinary incontinence (SUI) (RR 1.87, 95% CI 0.72 to 4.86; 4 RCTs, n = 395; I(2) = 0%, moderate

  2. 77 FR 20846 - Certain Food Containers, Cups, Plates, Cutlery, and Related Items and Packaging Thereof...

    Science.gov (United States)

    2012-04-06

    ... COMMISSION Certain Food Containers, Cups, Plates, Cutlery, and Related Items and Packaging Thereof... importation of certain food containers, cups, plates, cutlery, and related items and packaging thereof by... importation of certain food containers, cups, plates, cutlery, and related items and packaging thereof...

  3. 78 FR 36426 - Safety Zone; Queen's Cup; Lake Michigan; Milwaukee, WI

    Science.gov (United States)

    2013-06-18

    ... DHS Department of Homeland Security FR Federal Register NPRM Notice of Proposed Rulemaking TFR... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Queen's Cup; Lake Michigan; Milwaukee, WI... Queen's Cup Regatta. The Queen's Cup Regatta is a race from Milwaukee, WI to Ludington, MI that...

  4. Vacuolar processing enzyme activates programmed cell death in the apical meristem inducing loss of apical dominance.

    Science.gov (United States)

    Teper-Bamnolker, Paula; Buskila, Yossi; Belausov, Eduard; Wolf, Dalia; Doron-Faigenboim, Adi; Ben-Dor, Shifra; Van der Hoorn, Renier A L; Lers, Amnon; Eshel, Dani

    2017-10-01

    The potato (Solanum tuberosum L.) tuber is a swollen underground stem that can sprout in an apical dominance (AD) pattern. Bromoethane (BE) induces loss of AD and the accumulation of vegetative vacuolar processing enzyme (S. tuberosum vacuolar processing enzyme [StVPE]) in the tuber apical meristem (TAM). Vacuolar processing enzyme activity, induced by BE, is followed by programmed cell death in the TAM. In this study, we found that the mature StVPE1 (mVPE) protein exhibits specific activity for caspase 1, but not caspase 3 substrates. Optimal activity of mVPE was achieved at acidic pH, consistent with localization of StVPE1 to the vacuole, at the edge of the TAM. Downregulation of StVPE1 by RNA interference resulted in reduced stem branching and retained AD in tubers treated with BE. Overexpression of StVPE1 fused to green fluorescent protein showed enhanced stem branching after BE treatment. Our data suggest that, following stress, induction of StVPE1 in the TAM induces AD loss and stem branching. © 2017 John Wiley & Sons Ltd.

  5. The Brazilian World Cup: too hot for soccer?

    Science.gov (United States)

    Lucena, Rebecca Luna; Steinke, Ercília Torres; Pacheco, Christina; Vieira, Lucas Lima; Betancour, Maribel Olaya; Steinke, Valdir Adilson

    2017-08-01

    The main objective of this research was to analyze the climate data for the host cities of the soccer World Cup held in Brazil in June and July 2014. A great deal of criticism was expressed about the Brazilian climate in the national and international press and media in the run-up to the competition, suggesting that the air temperature and relative air humidity would be the main adversaries of the soccer teams, especially those from Europe, during the competition. An analysis of the weather was done at the places and times of each of the 64 matches held. A human thermal comfort index was calculated (discomfort index (DI)) for each of the matches in order to discover the real climatic conditions in the host cities during the 2014 World Cup and their potential influence on the teams and human comfort in general. During the 2014 World Cup, only two matches were played at temperatures above 30 °C, representing a negligible percentage of the total number of matches. The air temperature for over half the matches (53%) was 20-25 °C. The results showed the air temperature and relative humidity data analyzed here both individually and in the form of an index indicate that the World Cup held in Brazil in 2014 did not put any of the players at risk due to extreme heat.

  6. Treatment of Acute Lumbar Sprain by Acupuncture plus Cupping

    Institute of Scientific and Technical Information of China (English)

    WANG Jun-ying; WANG Si-you

    2003-01-01

    Fifty cases of acute lumbar sprain were treated by the combination of acupuncture, cupping and kinesitherapy. Forty-three cases were cured and 7 cases improved, the total effective rate being 100%. This therapy has an exact effect with a short course of treatment.

  7. RoboCup Rescue Robot and Simulation Leagues

    NARCIS (Netherlands)

    Akin, H.L.; Ito, N.; Jacoff, A.; Kleiner, A.; Pellenz, J.; Visser, A.

    2013-01-01

    The RoboCup Rescue Robot and Simulation competitions have been held since 2000. The experience gained during these competitions has increased the maturity level of the field, which allowed deploying robots after real disasters (for example, Fukushima Daiichi nuclear disaster). This article provides

  8. Observation on Therapeutic Effects of Cupping Therapy for Allergic Rhinitis

    Institute of Scientific and Technical Information of China (English)

    许荣正; 朱雪兰; 吴国民; 黄国琪

    2010-01-01

    @@ Allergic rhinitis is mainly characterized by the symptoms of sneezing,tickling sensation in the nose,runny nose,and nasal obstruction,and often occurs after invasion of pathogenic wind and cold.The author has treated 50 cases of this disease by applying cupping therapy on Shenque (CV 8).Now,the report is given as follows.

  9. Development of a classification system for cup anemometers - CLASSCUP

    DEFF Research Database (Denmark)

    Friis Pedersen, Troels

    2003-01-01

    Errors associated with the measurements of the wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show a significant and not acceptable difference. TheEuropean CLASSCUP research project posed the object......Errors associated with the measurements of the wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show a significant and not acceptable difference. TheEuropean CLASSCUP research project posed...... the objectives to quantify the errors associated with the use of cup anemometers, and to determine the requirements for an optimum design of a cup anemometer, and to develop a classification system forquantification of systematic errors of cup anemometers. The present report describes this proposed...... classification system. A classification method for cup anemometers has been developed, which proposes general external operational ranges to be used. Anormal category range connected to ideal sites of the IEC power performance standard was made, and another extended category range for complex terrain...

  10. Ryder Cup ning rahvusvaheline kogemus teenindusvaldkonnast / Liis Meeras

    Index Scriptorium Estoniae

    Meeras, Liis

    2006-01-01

    Iirimaal Dublini lähedal Kildare maakonna provintsis asuvas K-Clubis 22.-24. septembrini toimunud 36. Ryder Cup turniirist, mis on üks prestiizhikaim golfiüritus maailmas. Oma muljetest räägivad üritusel teenindanud turismitudengid TÜ Pärnu kolledzhist

  11. Ryder Cup ning rahvusvaheline kogemus teenindusvaldkonnast / Liis Meeras

    Index Scriptorium Estoniae

    Meeras, Liis

    2006-01-01

    Iirimaal Dublini lähedal Kildare maakonna provintsis asuvas K-Clubis 22.-24. septembrini toimunud 36. Ryder Cup turniirist, mis on üks prestiizhikaim golfiüritus maailmas. Oma muljetest räägivad üritusel teenindanud turismitudengid TÜ Pärnu kolledzhist

  12. Evaluating The RoboCup 2009 Virtual Robot Rescue Competition

    NARCIS (Netherlands)

    Balakirsky, S.; Carpin, S.; Visser, A.

    2009-01-01

    The 2009 RoboCup Competitions took place in Graz Austria in July of 2009. The Virtual Robot Rescue Competition included 11 competitors from 10 different countries. The main objective of this competition is to utilize teams of robots to perform an urban search and rescue (USAR) mission over both indo

  13. Teaching Transport Phenomena around a Cup of Coffee

    Science.gov (United States)

    Condoret, Jean Stephane

    2007-01-01

    The very common situation of waiting for the cooling of a cup of coffee is addressed through a conventional engineering approach, where several important concepts of heat and mass transfer are used. A numerical and analytical solution of the differential equations of the problem are proposed, and assessed by comparing to simple experiments.…

  14. Characterisation and classification of RISOe P2546 cup anemometer

    Energy Technology Data Exchange (ETDEWEB)

    Friis Pedersen, T.

    2004-03-01

    The characteristics of the RISOe P2546 cup anemometer were investigated in detail, and all data presented in figures and tables. The characteristics include: wind tunnel calibrations, including an accredited calibration; tilt response meas-urements for tilt angles from -40 deg. C to 40 deg. C; gust response measurements at 8m/s, 10,5m/s and 13m/s and turbulence intensities of 10%, 16% and 23%; step response measurements at step wind speeds 4, 8, 12 and 15m/s; measurement of torque characteristics at 8m/s; rotor inertia measurements and measurements of friction of bearings at temperatures -20 deg. C to 40 deg. C. The characteristics are fitted to a time domain cup anemometer model, and the cup anemometer is put into the CLASSCUP classification scheme. The characteristics are also compared to the requirements to cup anemometers in the Danish wind turbine certification system and the CD and CDV of the revision of the standard IEC 61400-12. (au)

  15. Effect of cytokinins on shoot apical meristem in Nicotiana tabacum

    Directory of Open Access Journals (Sweden)

    Uzelac Branka

    2012-01-01

    Full Text Available Cytokinins are involved in plant cell proliferation leading to plant growth and morphogenesis. The size, activity and maintenance of the shoot apical meristem (SAM are defined by a balanced rate of mitotic cell divisions and functional cell differentiation that are controlled by cytokinins. In order to investigate the effect of exogenous cytokinin on SAM, morpho-anatomical changes in the shoot apices of tobacco treated with benzyladenine (BA were compared to those of untreated control plants.

  16. Hypertrophic cardiomyopathy with mid-ventricular obstruction and apical aneurysm

    Directory of Open Access Journals (Sweden)

    N.D. Oryshchyn

    2016-11-01

    Full Text Available A case report of apical left ventricular aneurysm in patient with hypertrophic cardiomyopathy with mid-ventricular obstruction (diagnosis and surgical treatment is presented. We revealed apical aneurysm and mid-ventricular obstruction during echocardiography and specified anatomical characteristics of aneurysm during computer tomography. There was no evidence of obstructive coronary artery disease during coronary angiography. Taking into consideration multiple cerebral infarcts, aneurysm resection and left ventricular plastics was performed. Electronic microscopy of myocardium confirmed the diagnosis of hypertrophic cardiomyopathy.

  17. The economic value of the 2010 Soccer World Cup

    Directory of Open Access Journals (Sweden)

    M. Saayman

    2008-12-01

    Full Text Available Purpose: The purpose of this article is to estimate the potential economic value of the 2010 Soccer World Cup for South Africa. Problem investigated: The Soccer World Cup (SWC is regarded as the largest sporting event to be hosted and South Africa is investing billions of Rand in the hosting thereof. Based on this the question that comes to mind is, what is the potential economic value of such an event? Previous research attempts to determine the economic value were limited in their focus on what should be included when economic modelling of events is conducted. Most of these studies were done by consultants on behalf of various government departments and consequently, the results of these attempts are criticised for their over-inflating and overestimations by various other researchers. Methodology: The literature review identified many aspects that need to be taken into account when modelling the economic impact of such an event together with aspects identified in the literature review. Lessons from the 2002 Korea/Japan and 2006 Germany Soccer World Cups were used as premise for our estimations. In this article, Computable General Equilibrium (CGE modelling is used to estimate the potential economic value. Findings: The results showed that the 2010 Soccer World Cup would in all probability have positive impacts on the economy of the country in terms of GDP growth and employment, with possible negative effects that include higher inflation and net export losses. Value of research: The value of this research lies in the approach that was followed firstly, by introducing lessons learned from previous World Cups as well as aspects not taken into consideration previously in economic modelling and secondly, by using CGE modelling in determining the economic value. Conclusion: The hosting of the 2010 Soccer World Cup is a major achievement not only for South Africa, but also for the rest of Africa, especially from a marketing point of view. From an

  18. Failure of dual radius hydroxyapatite-coated acetabular cups

    Directory of Open Access Journals (Sweden)

    Zatti Giovanni

    2008-08-01

    Full Text Available Abstract Introduction Many kind of hydroxyapatite-coated cups were used, with favorable results in short term studies; it was supposed that its use could improve osteointegration of the cup, enhancing thus stability and survivorship. The purpose of this study is to analyze the long term behavior of the hemispheric HA coated, Dual Radius Osteonics cup and to discuss the way of failure through the exam of the revised components and of both periacetabular and osteolysis tissue. Materials and Methods Between 1994 and 1997, at the Department of Orthopedic Sciences of the Insubria University, using the posterolateral approach, were implanted 276 Dual Radius Osteonics® in 256 patients, with mean age of 63 years. Results At a mean follow-up of 10 years (range 8–12 years, 183 cups in 165 patients, were available for clinical and radiographical evaluation. 22 Cups among the 183 were revised (11%. The cause of revision was aseptic loosening in 17 cases, septic loosening in one case, periprosthetic fracture in another case, osteolysis and polyethylene wear in two cases and, finally, recurrent dislocations in the last one. In the remaining patients, mean HHS increased from a preoperative value of 50,15 to a postoperative value of 92,69. The mean polyethylene wear was 1,25 mm (min. 0,08, max. 3,9 mm, with a mean annual wear of 0,17 mm. The mean acetabular migration on the two axis was 1,6 mm and 1,8 mm. Peri-acetabular osteolysis were recorded in 89% of the implants (163 cases. The cumulative survivorship (revision as endpoint at the time was 88,9%. Conclusion Our study confirms the bad behavior of this type of cup probably related to the design, to the method of HA fixation. The observations carried out on the revised cup confirm these hypotheses but did not clarify if the third body wear could be a further problem. Another interesting aspect is the high incidence of osteolysis, which are often asymptomatic becoming a problem for the surgeon as the

  19. Failure of dual radius hydroxyapatite-coated acetabular cups.

    Science.gov (United States)

    D'Angelo, Fabio; Molina, Mauro; Riva, Giacomo; Zatti, Giovanni; Cherubino, Paolo

    2008-08-07

    Many kind of hydroxyapatite-coated cups were used, with favorable results in short term studies; it was supposed that its use could improve osteointegration of the cup, enhancing thus stability and survivorship. The purpose of this study is to analyze the long term behavior of the hemispheric HA coated, Dual Radius Osteonics cup and to discuss the way of failure through the exam of the revised components and of both periacetabular and osteolysis tissue. Between 1994 and 1997, at the Department of Orthopedic Sciences of the Insubria University, using the posterolateral approach, were implanted 276 Dual Radius Osteonics in 256 patients, with mean age of 63 years. At a mean follow-up of 10 years (range 8-12 years), 183 cups in 165 patients, were available for clinical and radiographical evaluation. 22 Cups among the 183 were revised (11%). The cause of revision was aseptic loosening in 17 cases, septic loosening in one case, periprosthetic fracture in another case, osteolysis and polyethylene wear in two cases and, finally, recurrent dislocations in the last one. In the remaining patients, mean HHS increased from a preoperative value of 50.15 to a postoperative value of 92.69. The mean polyethylene wear was 1.25 mm (min. 0.08, max 3.9 mm), with a mean annual wear of 0.17 mm. The mean acetabular migration on the two axis was 1.6 mm and 1.8 mm. Peri-acetabular osteolysis were recorded in 89% of the implants (163 cases). The cumulative survivorship (revision as endpoint) at the time was 88,9%. Our study confirms the bad behavior of this type of cup probably related to the design, to the method of HA fixation. The observations carried out on the revised cup confirm these hypotheses but did not clarify if the third body wear could be a further problem. Another interesting aspect is the high incidence of osteolysis, which are often asymptomatic becoming a problem for the surgeon as the patient refuses the possibility of a revision.

  20. Cup anemometry in wind engineering, struggle for improvement

    Energy Technology Data Exchange (ETDEWEB)

    Albers, A.; Klug, H.; Westermann, D. [DEWI, Wilhelmshaven (Germany)

    2001-02-01

    Large deviations between measurements with cup anemometers of different types in turbulent air flow have recently been identified. The key problem resulting for the wind industry is that wind speed measurements performed with different anemometer types are not directly comparable. Solutions for this problem are believed to be found in a classification of cup anemometers or a correction among different cup anemometer types, while the focus must not necessarily lie on the determination of the true wind speed. The investigated cup anemometers fall roughly into two groups, namely the Risoee P2445b, the Vector A100 and the Metone 010C-1 anemometers tend to measure less wind speed in turbulent flow than the Thies 4.3303.22.X, the Friedrichs 4033.1100X and the Thies Compact anemometers. Measurements with a calibrated ultra sonic anemometer of type Gill Windmaster were closer to the first group at high wind speeds and to the latter group at lower wind speeds. Up to now all simple classification schemes oriented on basic physical properties of the cup anemometers, like the shape of the cups, the shape of the body or the size of the cups, were not successful. Also a classification of the cup anemometers according to their static response to vertically inclined air flow as measured in wind tunnels turned out to be inappropriate. A correction between the different groups of cup anemometers requires the knowledge which meteorological parameters have to be considered for the determination of the correction. From the existing measurements it is clear that such a correction is site specific and must account for the turbulence intensity. However, some cases appeared where at different sites with comparable turbulence intensity different deviations between the same pair of cup anemometers occurred which indicates that other flow parameters than the turbulence intensity also play an important role. (orig.) [German] Im Rahmen von Forschungsaktivitaeten unter Beteiligung des DEWI

  1. Development of apical blebbing in the boar epididymis.

    Directory of Open Access Journals (Sweden)

    Jennifer Hughes

    Full Text Available Microvesicles are of increasing interest in biology as part of normal function of numerous systems; from the immune system (T cell activation to implantation of the embryo (invasion of the trophoblasts and sperm maturation (protein transfer in the epididymis. Yet, the mechanisms involved in the appearance of apical blebbing from healthy cells as part of their normal function remain understudied. Microvesicles are produced via one of two pathways: exocytosis or apical blebbing also termed ectocytosis. This work quantifies the histological appearance of apical blebbing in the porcine epididymis during development and examines the role of endogenous estrogens in regulating this blebbing. Apical blebbing appears at puberty and increases in a linear manner into sexual maturity suggesting that this blebbing is a mature phenotype. Endogenous estrogen levels were reduced with an aromatase inhibitor but such a reduction did not affect apical blebbing in treated animals compared with their vehicle-treated littermates. Epididymal production of apical blebs is a secretion mechanism of functionally mature principal cells regulated by factors other than estradiol.

  2. Haemostatic agents in apical surgery. A systematic review

    Science.gov (United States)

    Clé-Ovejero, Adrià

    2016-01-01

    Background Blood presence in apical surgery can prevent the correct vision of the surgical field, change the physical properties of filling materials and reduce their sealing ability. Objetive To describe which are the most effective and safest haemostatic agents to control bleeding in patients undergoing apical surgery. Material and Methods TWe carried out a systematic review, using Medline and Cochrane Library databases, of human clinical studies published in the last 10 years. Results The agents that proved more effective in bleeding control were calcium sulphate (100%) and collagen plus epinephrine (92.9%) followed by ferric sulphate (60%), gauze packing (30%) and collagen (16.7%). When using aluminium chloride (Expasyl®), over 90% of the apical lesions improved, but this agent seemed to increase swelling. Epinephrine with collagen did not significantly raise either blood pressure or heart rate. Conclusions Despite the use of several haemostatic materials in apical surgery, there is little evidence on their effectiveness and safety. The most effective haemostatic agents were calcium sulphate and epinephrine plus collagen. Epinephrine plus collagen did not seem to significantly raise blood pressure or heart rate during surgery. Aluminium chloride did not increase postoperative pain but could slightly increase postoperative swelling. Randomized clinical trials are needed to assess the haemostatic effectiveness and adverse effects of haemostatic materials in apical surgery. Key words:Haemostasis, apical surgery. PMID:27475689

  3. Football injuries during the 2014 FIFA World Cup

    Science.gov (United States)

    Junge, Astrid; Dvořák, Jiri

    2015-01-01

    Background FIFA has surveyed match injuries in its tournaments since 1998. Aim To analyse the incidence and characteristics of match injuries incurred during the 2014 FIFA World Cup in comparison to previous FIFA World Cups. Methods The chief physicians of the participating teams reported all newly incurred injuries of their players after the match on a standardised report form. 124 (97%) forms were returned. Results A total of 104 injuries were reported, equivalent to an incidence of 1.68 injuries per match (95% CI 1.36 to 2.00). 64 (63.4%) injuries were caused by contact with another player. Thigh (26; 25%) and head (19; 18%) were the most frequently injured body parts. The most frequent diagnosis was thigh strain (n=18). Five concussions and three fractures to the head were reported. While most thigh strains (15/17; 88.2%) occurred without contact, almost all head injuries (18/19; 94.7%) were caused by contact. 0.97 injuries per match (95% CI 0.72 to 1.22) were expected to result in absence from training or match. Eight injuries were classified as severe. The incidence of match injuries in the 2014 FIFA World Cup was significantly lower than the average of the four preceding FIFA World Cups, both for all injuries (2.34; 95% CI 2.15 to 2.53) and time-loss injuries (1.51; 95% CI 1.37 to 1.65). Conclusions The overall incidence of injury during the FIFA World Cups decreased from 2002 to 2014 by 37%. A detailed analysis of the injury mechanism is recommended to further improve prevention strategies. PMID:25878077

  4. Histogram-driven cupping correction (HDCC) in CT

    Science.gov (United States)

    Kyriakou, Y.; Meyer, M.; Lapp, R.; Kalender, W. A.

    2010-04-01

    Typical cupping correction methods are pre-processing methods which require either pre-calibration measurements or simulations of standard objects to approximate and correct for beam hardening and scatter. Some of them require the knowledge of spectra, detector characteristics, etc. The aim of this work was to develop a practical histogram-driven cupping correction (HDCC) method to post-process the reconstructed images. We use a polynomial representation of the raw-data generated by forward projection of the reconstructed images; forward and backprojection are performed on graphics processing units (GPU). The coefficients of the polynomial are optimized using a simplex minimization of the joint entropy of the CT image and its gradient. The algorithm was evaluated using simulations and measurements of homogeneous and inhomogeneous phantoms. For the measurements a C-arm flat-detector CT (FD-CT) system with a 30×40 cm2 detector, a kilovoltage on board imager (radiation therapy simulator) and a micro-CT system were used. The algorithm reduced cupping artifacts both in simulations and measurements using a fourth-order polynomial and was in good agreement to the reference. The minimization algorithm required less than 70 iterations to adjust the coefficients only performing a linear combination of basis images, thus executing without time consuming operations. HDCC reduced cupping artifacts without the necessity of pre-calibration or other scan information enabling a retrospective improvement of CT image homogeneity. However, the method can work with other cupping correction algorithms or in a calibration manner, as well.

  5. Radiological diagnostics in CUP syndrome; Radiologische Diagnostik des CUP-Syndroms

    Energy Technology Data Exchange (ETDEWEB)

    Kazmierczak, P.M.; Nikolaou, K.; Graser, A.; Reiser, M.F.; Cyran, C.C. [Klinikum der Ludwig-Maximilians-Universitaet, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany); Rominger, A. [Klinikum der Ludwig-Maximilians-Universitaet, Campus Grosshadern, Klinik und Poliklinik fuer Nuklearmedizin, Muenchen (Germany)

    2014-02-15

    Imaging plays an essential role in the therapeutic management of cancer of unknown primary (CUP) patients for localizing the primary tumor, for the identification of tumor entities for which a dedicated therapy regimen is available and for the characterization of clinicopathological subentities that direct the subsequent diagnostic and therapeutic strategy. Modalities include conventional x-ray, computed tomography (CT), magnetic resonance imaging (MRI) and ultrasound as well as positron emission tomography (PET)-CT and MRI-PET. In whole body imaging CT has a high sensitivity for tumor entities which frequently present as a metastasized cancer illness. According to the current literature CT is diagnostic in 86% of patients with pancreatic carcinoma, in 36% of patients with colon carcinoma and in 74% of patients with lung carcinoma. Additionally a meta-analysis showed that for patients with squamous cell carcinoma and cervical lymph node metastases a positive diagnosis was possible in 22% of the cases using CT, in 36% using MRI and in 28-57% using 18F-fluorodeoxyglucose PET-CT ({sup 18}F-FDG PET-CT). In addition, MRI plays an important role in the localization of primary occult tumors (e.g. breast and prostate) because of its high soft tissue contrast and options for functional imaging. At the beginning of the diagnostic algorithm stands the search for a possible primary tumor and CT of the neck, thorax and abdomen is most frequently used for whole body staging. Subsequent organ-specific imaging examinations follow, e.g. mammography in women with axillary lymphadenopathy. For histological and immunohistochemical characterization of tumor tissue, imaging is also applied to identify the most accessible and representative tumor manifestation for biopsy. Tumor biopsy may be guided by CT, MRI or ultrasound and MRI also plays a central role in the localization of primary occult tumors because of superior soft tissue contrast and options for functional imaging (perfusion

  6. Effect of apical clearing technique on the treatment outcome of teeth with asymptomatic apical periodontitis: A randomized clinical trial

    Science.gov (United States)

    Mittal, Priya; Logani, Ajay; Shah, Naseem; Pandey, R. M.

    2016-01-01

    Aim: This study aims to compare the periapical healing of teeth with asymptomatic apical periodontitis treated either by conventional apical preparation (CAP) or apical clearing technique (ACT). Materials and Methods: Twenty subjects with bilateral nonvital similar teeth exhibiting comparable periapical index (PAI) score were enrolled and randomly allocated. Group I (CAP, n = 20): Apical preparation three sizes greater (master apical file [MAF]) than the first binding file at the established working length. Group II (ACT, n = 20): Apical preparation three sizes greater than the MAF that was followed by dry reaming. Root canal therapy was accomplished in single-visit for all the teeth. They were pursued radiographically at 3, 6, 9 and 12 months. Pre- and post-treatment PAI scores were compared. To ascertain the proportion of healed teeth between the two groups, McNemar Chi-square test was applied. Results: At 3, 6, and 9 months’ time interval the proportion of healed teeth for Group II (ACT) was greater in comparison to Group I (CAP) (P < 0.05). However, at 12 months follow-up period this difference was not significant (P = 0.08). Conclusion: ACT enhanced the healing kinetics. However, the long-term (12 months) radiographic outcome was similar for either technique. PMID:27656054

  7. Differentiation of Apical Bud Cells in a Newly Developed Apical Bud Transplantation Model Using GFP Transgenic Mice as Donor

    Science.gov (United States)

    Sakagami, Ryuji; Yoshinaga, Yasunori; Okamura, Kazuhiko

    2016-01-01

    Rodent mandibular incisors have a unique anatomical structure that allows teeth to grow throughout the lifetime of the rodent. This report presents a novel transplantation technique for studying the apical bud differentiation of rodent mandibular incisors. Incisal apical end tissue with green fluorescent protein from transgenic mouse was transplanted to wild type mice, and the development of the transplanted cells were immunohistologically observed for 12 weeks after the transplantation. Results indicate that the green fluorescent apical end tissue replaced the original tissue, and cells from the apical bud differentiated and extended toward the incisal edge direction. The immunostaining with podoplanin also showed that the characteristics of the green fluorescent tissue were identical to those of the original. The green fluorescent cells were only found in the labial side of the incisor up to 4 weeks. After 12 weeks, however, they were also found in the lingual side. Here the green fluorescent cementocyte-like cells were only present in the cementum close to the dentin surface. This study suggests that some of the cells that form the cellular cementum come from the apical tissue including the apical bud in rodent incisors. PMID:26978064

  8. Differentiation of Apical Bud Cells in a Newly Developed Apical Bud Transplantation Model Using GFP Transgenic Mice as Donor.

    Directory of Open Access Journals (Sweden)

    Naoki Maruo

    Full Text Available Rodent mandibular incisors have a unique anatomical structure that allows teeth to grow throughout the lifetime of the rodent. This report presents a novel transplantation technique for studying the apical bud differentiation of rodent mandibular incisors. Incisal apical end tissue with green fluorescent protein from transgenic mouse was transplanted to wild type mice, and the development of the transplanted cells were immunohistologically observed for 12 weeks after the transplantation. Results indicate that the green fluorescent apical end tissue replaced the original tissue, and cells from the apical bud differentiated and extended toward the incisal edge direction. The immunostaining with podoplanin also showed that the characteristics of the green fluorescent tissue were identical to those of the original. The green fluorescent cells were only found in the labial side of the incisor up to 4 weeks. After 12 weeks, however, they were also found in the lingual side. Here the green fluorescent cementocyte-like cells were only present in the cementum close to the dentin surface. This study suggests that some of the cells that form the cellular cementum come from the apical tissue including the apical bud in rodent incisors.

  9. Changes of the Unique Odontogenic Properties of Rat Apical Bud Cells under the Developing Apical Complex Microenvironment

    Institute of Scientific and Technical Information of China (English)

    Jun Fang; Liang Tang; Xiao-hui Liu; Ling-ying Wen; Yan Jin

    2009-01-01

    Aim To characterize the odontogenic capability of apical bud and phenotypical change of apical bud cells (ABCs) in different microenvironment. Methodology Incisor apical bud tissues from neonatal SD rat were dissected and transplanted into the renal capsules to determine their odontogenic capability. Meanwhile ABCs were cultured and purified by repeated differential trypsinization. Then ABCs were cultured with conditioned medium from developing apical complex cells (DAC-CM). Immunocytochemistry, reverse transcriptase polymerase chain reaction (RT-PCR) and scanning electron microscope (SEM) were performed to compare the biological change of ABC treated with or without DAC-CM. Results First we confirmed the ability of apical bud to form crown-like structure ectopically. Equally important, by using the developing apical complex (DAC) conditioned medium, we found the microenvironment created by root could abrogate the "crown" features of ABCs and promote their proliferation and differentiation. Conclusion ABCs possess odontogenic capability to form crown-like tissues and this property can be affected by root-produced microenvironment.

  10. Five-year longitudinal assessment of the prognosis of apical microsurgery

    DEFF Research Database (Denmark)

    von Arx, Thomas; Jensen, Simon S; Hänni, Stefan

    2012-01-01

    Apical surgery is an important treatment option for teeth with post-treatment apical periodontitis. Knowledge of the long-term prognosis is necessary when weighing apical surgery against alternative treatments. This study assessed the 5-year outcome of apical surgery and its predictors in a cohort...

  11. Molecular cell death platforms and assemblies.

    Science.gov (United States)

    Mace, Peter D; Riedl, Stefan J

    2010-12-01

    Multi-cellular animals have evolved a variety of mechanisms to respond to diverse apoptotic stimuli. In general these proceed through activation of apical caspases and culminate in executioner caspase activation and cell death. Because of the breadth of possible initiators, various molecular platforms are used to trigger different apical caspases. Although some common protein domains are used to assemble the apoptosome, the PIDDosome and death receptor complexes, an array of checks-and-balances are employed to ensure appropriate activation. Notwithstanding, these pathways share the underlying principle of proximity-dependent activation and post-translational modification. Here we will describe our current structural understanding of assembly and regulation of these signaling platforms.

  12. Alignment Pins for Assembling and Disassembling Structures

    Science.gov (United States)

    Campbell, Oliver C.

    2008-01-01

    Simple, easy-to-use, highly effective tooling has been devised for maintaining alignment of bolt holes in mating structures during assembly and disassembly of the structures. The tooling was originally used during removal of a body flap from the space shuttle Atlantis, in which misalignments during removal of the last few bolts could cause the bolts to bind in their holes. By suitably modifying the dimensions of the tooling components, the basic design of the tooling can readily be adapted to other structures that must be maintained in alignment. The tooling includes tapered, internally threaded alignment pins designed to fit in the bolt holes in one of the mating structures, plus a draw bolt and a cup that are used to install or remove each alignment pin. In preparation for disassembly of two mating structures, external supports are provided to prevent unintended movement of the structures. During disassembly of the structures, as each bolt that joins the structures is removed, an alignment pin is installed in its place. Once all the bolts have been removed and replaced with pins, the pins maintain alignment as the structures are gently pushed or pulled apart on the supports. In assembling the two structures, one reverses the procedure described above: pins are installed in the bolt holes, the structures are pulled or pushed together on the supports, then the pins are removed and replaced with bolts. The figure depicts the tooling and its use. To install an alignment pin in a bolt hole in a structural panel, the tapered end of the pin is inserted from one side of the panel, the cup is placed over the pin on the opposite side of the panel, the draw bolt is inserted through the cup and threaded into the pin, the draw bolt is tightened to pull the pin until the pin is seated firmly in the hole, then the draw bolt and cup are removed, leaving the pin in place. To remove an alignment pin, the cup is placed over the pin on the first-mentioned side of the panel, the draw

  13. [Osteosynthesis and cup revision in periprosthetic acetabulum fractures using a Kocher-Langenbeck approach].

    Science.gov (United States)

    Schwabe, P; Märdian, S; Perka, C; Schaser, K-D

    2016-04-01

    Reconstruction/stable fixation of the acetabular columns to create an adequate periacetabular requirement for the implantation of a revision cup. Displaced/nondisplaced fractures with involvement of the posterior column. Resulting instability of the cup in an adequate bone stock situation. Periprosthetic acetabulum fractures with inadequate bone stock. Extended periacetabular defects with loss of anchorage options. Isolated periprosthetic fractures of the anterior column. Septic loosening. Dorsal approach. Dislocation of hip. Mechanical testing of inlaying acetabular cup. With unstable cup situation explantation of the cup, fracture fixation of acetabulum with dorsal double plate osteosynthesis along the posterior column. Cup revision. Hip joint reposition. Early mobilization; partial weight bearing for 12 weeks. Thrombosis prophylaxis. Clinical and radiological follow-ups. Periprosthetic acetabular fracture in 17 patients with 9 fractures after primary total hip replacement (THR), 8 after revision THR. Fractures: 12 due to trauma, 5 spontaneously; 7 anterior column fractures, 5 transverse fractures, 4 posterior column fractures, 1 two column fracture after hemiendoprosthesis. 5 type 1 fractures and 12 type 2 fractures. Operatively treated cases (10/17) received 3 reinforcement ring, 2 pedestal cup, 1 standard revision cup, cup-1 cage construct, 1 ventral plate osteosynthesis, 1 dorsal plate osteosynthesis, and 1 dorsal plate osteosynthesis plus cup revision (10-month Harris Hip Score 78 points). Radiological follow-up for 10 patients: consolidation of fractures without dislocation and a fixed acetabular cup. No revision surgeries during follow-up; 2 hip dislocations, 1 transient sciatic nerve palsy.

  14. Design and Research on Auto-vending Machine for Cupped Beverage

    Directory of Open Access Journals (Sweden)

    Xiaowei Jiang

    2014-12-01

    Full Text Available The aim of this research is to design an auto-vending machine for cupped beverage, specifically researching its working principle, the design of beverage powder transporting mechanism, paper cups detaching mechanism and paper cups slide mechanism. The article elaborates that the design of beverage powder transporting mechanism is mainly the selection of electromagnet and the determination of electromagnet stroke, requiring that the electromagnet stroke and the maximum weight that the electromagnet could bear should have rationality, to ensure its safe operation; the design of paper cups detaching mechanism mainly includes selecting electric motor and V belt; the design of paper cups slide mechanism includes the design of slide structure and the force analysis when the paper cup slides on the slide. And then the working principle and working process of the auto-vending machine for cupped beverage is introduced, based on which the conclusion has been reached.

  15. Insights from ANA-grade angiosperms into the early evolution of CUP-SHAPED COTYLEDON genes.

    Science.gov (United States)

    Vialette-Guiraud, Aurélie C M; Adam, Hélène; Finet, Cédric; Jasinski, Sophie; Jouannic, Stefan; Scutt, Charles P

    2011-06-01

    The closely related NAC family genes NO APICAL MERISTEM (NAM) and CUP-SHAPED COTYLEDON3 (CUC3) regulate the formation of boundaries within and between plant organs. NAM is post-transcriptionally regulated by miR164, whereas CUC3 is not. To gain insight into the evolution of NAM and CUC3 in the angiosperms, we analysed orthologous genes in early-diverging ANA-grade angiosperms and gymnosperms. We obtained NAM- and CUC3-like sequences from diverse angiosperms and gymnosperms by a combination of reverse transcriptase PCR, cDNA library screening and database searching, and then investigated their phylogenetic relationships by performing maximum-likelihood reconstructions. We also studied the spatial expression patterns of NAM, CUC3 and MIR164 orthologues in female reproductive tissues of Amborella trichopoda, the probable sister to all other flowering plants. Separate NAM and CUC3 orthologues were found in early-diverging angiosperms, but not in gymnosperms, which contained putative orthologues of the entire NAM + CUC3 clade that possessed sites of regulation by miR164. Multiple paralogues of NAM or CUC3 genes were noted in certain taxa, including Brassicaceae. Expression of NAM, CUC3 and MIR164 orthologues from Am. trichopoda was found to co-localize in ovules at the developmental boundary between the chalaza and nucellus. The NAM and CUC3 lineages were generated by duplication, and CUC3 was subsequently lost regulation by miR164, prior to the last common ancestor of the extant angiosperms. However, the paralogous NAM clade genes CUC1 and CUC2 were generated by a more recent duplication, near the base of Brassicaceae. The function of NAM and CUC3 in defining a developmental boundary in the ovule appears to have been conserved since the last common ancestor of the flowering plants, as does the post-transcriptional regulation in ovule tissues of NAM by miR164.

  16. Apical Revascularization after Delayed Tooth Replantation: An Unusual Case

    Directory of Open Access Journals (Sweden)

    Marília Pacífico Lucisano

    2016-01-01

    Full Text Available The aim of this paper is to present the clinical and radiological outcome of the treatment involving a delayed tooth replantation after an avulsed immature permanent incisor, with a follow-up of 1 year and 6 months. An 8-year-old boy was referred after dental trauma that occurred on the previous day. The permanent maxillary right central incisor (tooth 11 had been avulsed. The tooth was hand-held during endodontic therapy and an intracanal medication application with calcium hydroxide-based paste was performed. An apical plug with mineral trioxide aggregate (MTA was introduced into the apical portion of the canal. When the avulsed tooth was replanted with digital pressure, a blood clot had formed within the socket, which moved the MTA apical plug about 2 mm inside of the root canal. These procedures developed apical revascularization, which promoted a successful endodontic outcome, evidenced by apical closure, slight increase in root length, and absence of signs of external root resorption, during a follow-up of 1 year and 6 months.

  17. Characterization of rat apical tissues in different root development stage.

    Science.gov (United States)

    Xu, Lin; Yang, Zhenhua; Jin, Fang; Duan, Yinzhong; Jin, Yan

    2011-10-01

    In this study, we try to compare the histological characteristics and the odontogenic capability of apical tissues (AT) at different root development stages of rat molar teeth. AT of mandibular first molars from 8-day-old, 21-day-old, and 35-day-old Sprague-Dawley rats were selected as being representative of root-initiating, root-forming, and root-completing stages, respectively. Cell counting, flow cytometry assays, alkaline phosphatase activity, alizarin red staining, and reverse transcription polymerase chain reaction were performed to assess the proliferation and mineralization potential of apical tissue cells at different stages of root development in vitro. In vivo transplantation of apical tissue cells combined with ceramic bovine bone was used to characterize the differentiation capacity. It was shown that there was a structurally and functionally dynamic change in the apical tissue of developing tooth root of rats, of which the unique developmental potential will reduce gradually with the ending up of root development. The AT of root-initiating and root-forming stage exhibited much higher proliferation and tissue-regenerative capacity than those of root-completing stage. Our present results indicate that the apical tissue, with the sustainable developmental ability throughout almost the whole process of tooth development, can yet be regarded as a competent candidate source for root/periodontal tissues regeneration.

  18. Apical Revascularization after Delayed Tooth Replantation: An Unusual Case

    Science.gov (United States)

    Nelson-Filho, Paulo; Silva, Lea Assed Bezerra; Silva, Raquel Assed Bezerra; de Carvalho, Fabricio Kitazono; de Queiroz, Alexandra Mussolino

    2016-01-01

    The aim of this paper is to present the clinical and radiological outcome of the treatment involving a delayed tooth replantation after an avulsed immature permanent incisor, with a follow-up of 1 year and 6 months. An 8-year-old boy was referred after dental trauma that occurred on the previous day. The permanent maxillary right central incisor (tooth 11) had been avulsed. The tooth was hand-held during endodontic therapy and an intracanal medication application with calcium hydroxide-based paste was performed. An apical plug with mineral trioxide aggregate (MTA) was introduced into the apical portion of the canal. When the avulsed tooth was replanted with digital pressure, a blood clot had formed within the socket, which moved the MTA apical plug about 2 mm inside of the root canal. These procedures developed apical revascularization, which promoted a successful endodontic outcome, evidenced by apical closure, slight increase in root length, and absence of signs of external root resorption, during a follow-up of 1 year and 6 months. PMID:27882250

  19. [Mineral trioxide aggregate (MTA) a success story in apical surgery].

    Science.gov (United States)

    von Arx, Thomas

    2016-01-01

    The objective of apical surgery is to retain teeth with persistent apical pathosis following orthograde root canal treatment if endodontic non-surgical revision is difficult or associated with risks, or is even declined by the patient. Since the most frequent cause of recurrent apical disease is bacterial reinfection from the (remaining) root canal system, the bacteria-tight root-end filling is the most important step in apical surgery. In the early 1990s, mineral trioxide aggregate (MTA) was developed at the Loma Linda University in California/USA. Preclinical studies clearly showed that MTA has a high sealing capability, a good material stability and an excellent biocompatbility. Multiple experimental studies in animals highlighted the mild tissue reactions observed adjacent to this material. Furthermore, histological analysis of the periapical regions demonstrated a frequent deposition of new cementum not only onto the resection plane (cut dentinal surface), but also directly onto MTA. For these reasons, MTA is considered a bioactive material. In 1997 MTA was cleared for clinical use in patients. Multiple prospective clinical and randomized studies have documented high and constant success rates of MTA-treated teeth in apical surgery. A recently published longitudinal study showed that MTA-treated teeth remained stable over five years; hence the high healed rates documented after one year are maintained during long-term observation.

  20. RNG1 is a Late Marker of the Apical Polar Ring in Toxoplasma gondii

    Science.gov (United States)

    Tran, Johnson Q.; de Leon, Jessica C.; Li, Catherine; Huynh, My-Hang; Beatty, Wandy; Morrissette, Naomi S.

    2010-01-01

    The asexually proliferating stages of apicomplexan parasites cause acute symptoms of diseases such as malaria, cryptosporidiosis and toxoplasmosis. These stages are characterized by the presence of two independent microtubule organizing centers (MTOCs). Centrioles are found at the poles of the intranuclear spindle. The apical polar ring (APR), a MTOC unique to apicomplexans, organizes subpellicular microtubules which impose cell shape and apical polarity on these protozoa. Here we describe the characteristics of a novel protein that localizes to the APR of Toxoplasma gondii which we have named ring-1 (RNG1). There are related RNG1 proteins in Neospora caninum and Sarcocystis neurona but no obvious homologs in Plasmodium spp., Cryptosporidium spp. or Babesia spp. RNG1 is a small, low-complexity, detergent-insoluble protein that assembles at the APR very late in the process of daughter parasite replication. We were unable to knock-out the RNG1 gene, suggesting that its gene product is essential. Tagged RNG1 lines have also allowed us to visualize the APR during growth of Toxoplasma in the microtubule-disrupting drug oryzalin. Oryzalin inhibits nuclear division and cytokinesis although Toxoplasma growth continues, and similar to earlier observations of unchecked centriole duplication in oryzalin-treated parasites, the APR continues to duplicate during aberrant parasite growth. PMID:20658557

  1. NMII forms a contractile transcellular sarcomeric network to regulate apical cell junctions and tissue geometry.

    Science.gov (United States)

    Ebrahim, Seham; Fujita, Tomoki; Millis, Bryan A; Kozin, Elliott; Ma, Xuefei; Kawamoto, Sachiyo; Baird, Michelle A; Davidson, Michael; Yonemura, Shigenobu; Hisa, Yasuo; Conti, Mary Anne; Adelstein, Robert S; Sakaguchi, Hirofumi; Kachar, Bechara

    2013-04-22

    Nonmuscle myosin II (NMII) is thought to be the master integrator of force within epithelial apical junctions, mediating epithelial tissue morphogenesis and tensional homeostasis. Mutations in NMII are associated with a number of diseases due to failures in cell-cell adhesion. However, the organization and the precise mechanism by which NMII generates and responds to tension along the intercellular junctional line are still not known. We discovered that periodic assemblies of bipolar NMII filaments interlace with perijunctional actin and α-actinin to form a continuous belt of muscle-like sarcomeric units (∼400-600 nm) around each epithelial cell. Remarkably, the sarcomeres of adjacent cells are precisely paired across the junctional line, forming an integrated, transcellular contractile network. The contraction/relaxation of paired sarcomeres concomitantly impacts changes in apical cell shape and tissue geometry. We show differential distribution of NMII isoforms across heterotypic junctions and evidence for compensation between isoforms. Our results provide a model for how NMII force generation is effected along the junctional perimeter of each cell and communicated across neighboring cells in the epithelial organization. The sarcomeric network also provides a well-defined target to investigate the multiple roles of NMII in junctional homeostasis as well as in development and disease. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Mechanisms of suppressing cup-burner flame with water vapor

    Institute of Scientific and Technical Information of China (English)

    CONG BeiHua; LIAO GuangXuan

    2008-01-01

    The mechanisms of suppressing a laminar methane-air co-flow diffusion flame formed on a cup burner with water vapor have been studied experimentally and numerically. The methane burned in a steel cup surrounded by a glass chimney. A mist generator produced fine droplets delivered though the glass chimney with air. These droplets were heated into water vapor when they went though the diffuser. The extinguishing limit was obtained by gradually increasing the amount of water vapor to replace the air in the coflowing oxidizer stream. Results showed that the agent concentration required for extinguishment was constant over a wide range of the oxidizer velocity, i.e., a so-called "plateau region". The measured extinguishing mass fractions of the agents were: (16.7±0.6)% for H2O, (15.9±0.6)% for CO2, and (31.9±0.6)% for N2. The computation used the Fire Dynamics Simulator (FDS) de-veloped by the NIST. The numerical simulations showed that the predicted water vapor extinguishing limits and the flickering frequency were in good agreements with the experimental observations and, more importantly, revealed that the sup-pression of cup-burner flames occurred via a partial extinction mechanism (in which the flame base drifts downstream and then blows off) rather than the global extinction mechanism of typical counter-flow diffusion flames. And the flame-base oscillation just before the blow-off was the key step for the non-premixed flame extinction in the cup burner.

  3. Hijama (wet cupping) for female infertility treatment: a pilot study

    OpenAIRE

    Hassan Abduljabbar; Anhar Gazzaz; Samiha Mourad; Ayman Oraif

    2016-01-01

    Background: To assess the effectiveness of wet cupping (Hijama) as a treatment of female factor infertility. The primary outcome measured was pregnancy rates after Hijama. The secondary outcome measured was the effect on the reproductive hormonal profile before and after Hijama. Methods: A pilot clinical study was conducted for the use of Hijama as treatment for female infertility at King Abdulaziz University Hospital from September 2013 to May 2015. Inclusion criteria included: patients w...

  4. The microwave absorption of ceramic-cup microwave ion source

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An experiment system of ceramic-cup microwave ion source has been built here. Its microwave absorption efficiency as a function of the magnetic field and the pressure is presented. When the microwave incident power is 300~500W the microwave absorption efficiencies are more than 90% if the system is optimized and the magnetic field at the microwave window is 0.095T.

  5. Gravity-free hydraulic jumps and metal femtoliter cups.

    Science.gov (United States)

    Mathur, Manikandan; DasGupta, Ratul; Selvi, N R; John, Neena Susan; Kulkarni, G U; Govindarajan, Rama

    2007-04-20

    Hydraulic jumps created by gravity are seen everyday in the kitchen sink. We show that at small scales a circular hydraulic jump can be created in the absence of gravity by surface tension. The theory is motivated by our experimental finding of a height discontinuity in spreading submicron molten metal droplets created by pulsed-laser ablation. By careful control of initial conditions, this leads to solid femtoliter cups of gold, silver, copper, niobium, and tin.

  6. Mechanisms of suppressing cup-burner flame with water vapor

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The mechanisms of suppressing a laminar methane-air co-flow diffusion flame formed on a cup burner with water vapor have been studied experimentally and numerically. The methane burned in a steel cup surrounded by a glass chimney. A mist generator produced fine droplets delivered though the glass chimney with air. These droplets were heated into water vapor when they went though the diffuser. The extinguishing limit was obtained by gradually increasing the amount of water vapor to replace the air in the coflowing oxidizer stream. Results showed that the agent concentration required for extinguishment was constant over a wide range of the oxidizer velocity, i.e., a so-called "plateau region". The measured extinguishing mass fractions of the agents were: (16.7 ± 0.6)% for H2O, (15.9 ± 0.6)% for CO2, and (31.9 ± 0.6)% for N2. The computation used the Fire Dynamics Simulator (FDS) de- veloped by the NIST. The numerical simulations showed that the predicted water vapor extinguishing limits and the flickering frequency were in good agreements with the experimental observations and, more importantly, revealed that the sup- pression of cup-burner flames occurred via a partial extinction mechanism (in which the flame base drifts downstream and then blows off) rather than the global extinction mechanism of typical counter-flow diffusion flames. And the flame-base oscillation just before the blow-off was the key step for the non-premixed flame extinction in the cup burner.

  7. Amylase polymorphism affects growth in the cupped oyster Crassostrea gigas

    OpenAIRE

    Huvet, Arnaud; Samain, Jean-francois; Boudry, Pierre; Bedier, Edouard; Ropert, Michel; Van Wormhoudt, A

    2005-01-01

    The better understanding of physiological and environmental factors that determine optimal food conversion efficiencies is of major interest for the cupped oyster Crassostrea gigas for which the strong increase of aquaculture has been correlated in France with a decrease in productivity due to competition between aquatic species for limited food supplies at grow-out sites. To investigate the non-neutrality of the polymorphism of amylase, a key enzyme for carbohydrate assimilation, in oyster p...

  8. Elastoplastic cup model for cement-based materials

    OpenAIRE

    Zhang, Yan; Shao, Jian-Fu

    2010-01-01

    Based on experimental data obtained from triaxial tests and a hydrostatic test, a cup model was formulated. Two plastic mechanisms, respectively a deviatoric shearing and a pore collapse, are taken into account. This model also considers the influence of confining pressure. In this paper, the calibration of the model is detailed and numerical simulations of the main mechanical behavior of cement paste over a large range of stress are described, showing good agreement with experimental results...

  9. Sphere anemometer - a faster alternative solution to cup anemometry

    Science.gov (United States)

    Hölling, M.; Schulte, B.; Barth, S.; Peinke, J.

    2007-07-01

    We present an anemometer technique characterized by an instrument in a sealed enclosure without moving parts. Measurements taken with our improved sphere anemometer in comparison to cup anemometer and hot-wire anemometer data subjected to wind gusts are discussed. The hot-wire anemometer serves as a reference with high temporal and spacial resolution. A manually driven "gust generator" produced gusts at low frequencies of about 1Hz. All measurements were carried out in the wind tunnel at the University of Oldenburg.

  10. Technology development for the Solar Probe Plus Faraday Cup

    Science.gov (United States)

    Freeman, Mark D.; Kasper, Justin; Case, Anthony W.; Daigneau, Peter; Gauron, Thomas; Bookbinder, Jay; Brodu, Étienne; Balat-Pichelin, Marianne; Wright, Kenneth

    2013-09-01

    The upcoming Solar Probe Plus (SPP) mission requires novel approaches for in-situ plasma instrument design. SPP's Solar Probe Cup (SPC) instrument will, as part of the Solar Wind Electrons, Alphas, and Protons (SWEAP) instrument suite, operate over an enormous range of temperatures, yet must still accurately measure currents below 1 pico-amp, and with modest power requirements. This paper discusses some of the key technology development aspects of the SPC, a Faraday Cup and one of the few instruments on SPP that is directly exposed to the solar disk, where at closest approach to the Sun (less than 10 solar radii (Rs) from the center of the Sun) the intensity is greater than 475 earth-suns. These challenges range from materials characterization at temperatures in excess of 1400°C to thermal modeling of the behavior of the materials and their interactions at these temperatures. We discuss the trades that have resulted in the material selection for the current design of the Faraday Cup. Specific challenges include the material selection and mechanical design of insulators, particularly for the high-voltage (up to 8 kV) grid and coaxial supply line, and thermo-optical techniques to minimize temperatures in the SPC, with the specific intent of demonstrating Technology Readiness Level 6 by the end of 2013.

  11. Development and first experimental tests of Faraday cup array.

    Science.gov (United States)

    Prokůpek, J; Kaufman, J; Margarone, D; Krůs, M; Velyhan, A; Krása, J; Burris-Mog, T; Busold, S; Deppert, O; Cowan, T E; Korn, G

    2014-01-01

    A new type of Faraday cup, capable of detecting high energy charged particles produced in a high intensity laser-matter interaction environment, has recently been developed and demonstrated as a real-time detector based on the time-of-flight technique. An array of these Faraday cups was designed and constructed to cover different observation angles with respect to the target normal direction. Thus, it allows reconstruction of the spatial distribution of ion current density in the subcritical plasma region and the ability to visualise its time evolution through time-of-flight measurements, which cannot be achieved with standard laser optical interferometry. This is a unique method for two-dimensional visualisation of ion currents from laser-generated plasmas. A technical description of the new type of Faraday cup is introduced along with an ad hoc data analysis procedure. Experimental results obtained during campaigns at the Petawatt High-Energy Laser for Heavy Ion Experiments (GSI, Darmstadt) and at the Prague Asterix Laser System (AS CR) are presented. Advantages and limitations of the used diagnostic system are discussed.

  12. From Tonic-cups to Bitter-cups: Kwasi bita beker from Suriname Determination, past and present use of an ancient galenic artefact.

    Science.gov (United States)

    Odonne, G; Bourdy, G; Beauchêne, J; Houël, E; Stien, D; Chevolot, L; Deharo, E

    2007-03-21

    In the main markets of Paramaribo (Suriname), many stands offer what is locally called "Bitter-cups", or "Kwasi bita beker", small footed-cups, roughly carved from a whitish wood. The use of these cups is strictly medicinal and it seems to be restricted to Suriname, as they are not found in neighbouring countries (Guyana, French Guiana). The aim of this study was to identify the botanical origin of Bitter-cups still in use in the Saramaka traditional medicine (as information from field people was controversial), and document the ethnopharmacology of this original galenical artefact. Microscopic and high performance liquid chromatography (HPLC) analyses were carried out on Bitter-cup, and anatomical criteria (marginal parenchyma band, size of intervessel and vessel-ray pits, rays width and rays composition, vessels clustering, frequency and size of parenchyma pits) together with HPLC profiles of the macerates showed that the wood cup was similar to Quassia amara L. (Simaroubaceae) wood. Ethnopharmacological investigation indicates that the use of these cups is simply due to the pharmacological properties attributed to "bitters", and is strongly linked to tradition and cultural attitudes. This study also emphasizes the long lasting use of these cups, now restricted to Suriname only, with almost no variation over one century.

  13. Cryopreservation of Pelargonium apices by droplet-vitrification.

    Science.gov (United States)

    Gallard, Anthony; Panis, Bart; Dorion, Nöelle; Swennen, Rony; Grapin, Agnès

    2008-01-01

    The droplet-vitrification method was adapted to Pelargonium apices by optimizing the duration of the loading solution (LS) as well as the plant vitrification solution 2 (PVS2). The excised apices were dehydrated in two steps (20 min in LS and 15 min in PVS2) and then immersed directly in liquid nitrogen (LN). After thawing and unloading in the recovery solution at room temperature for 15 min, apices were plated onto semi-solid Murashige and Skoog medium. This simple protocol without any pretreatment was successfully applied to eight cultivars with a survival level ranging between 55.6 - 96.2 percent and a regrowth level between 9.1 and 70.6 percent. These results prove the feasibility of the long-term storage of Pelargonium germplasm through cryopreservation.

  14. A novel mitochondrial ATP8 gene mutation in a patient with apical hypertrophic cardiomyopathy and neuropathy

    Science.gov (United States)

    Jonckheere, An I; Hogeveen, Marije; Nijtmans, Leo; van den Brand, Mariel; Janssen, Antoon; Diepstra, Heleen; van den Brandt, Frans; van den Heuvel, Bert; Hol, Frans; Hofste, Tom; Kapusta, Livia; Dillmann, U; Shamdeen, M; Smeitink, J; Smeitink, J; Rodenburg, Richard

    2009-01-01

    To identify the biochemical and molecular genetic defect in a 16-year-old patient presenting with apical hypertrophic cardiomyopathy and neuropathy suspected for a mitochondrial disorder. Measurement of the mitochondrial energy-generating system (MEGS) capacity in muscle and enzyme analysis in muscle and fibroblasts were performed. Relevant parts of the mitochondrial DNA were analysed by sequencing. A homoplasmic nonsense mutation m.8529G→A (p.Trp55X) was found in the mitochondrial ATP8 gene in the patient’s fibroblasts and muscle tissue. Reduced complex V activity was measured in the patient’s fibroblasts and muscle tissue, and was confirmed in cybrid clones containing patient-derived mitochondrial DNA We describe the first pathogenic mutation in the mitochondrial ATP8 gene, resulting in an improper assembly and reduced activity of the complex V holoenzyme. PMID:21686774

  15. Complex Polarity: Building Multicellular Tissues Through Apical Membrane Traffic.

    Science.gov (United States)

    Román-Fernández, Alvaro; Bryant, David M

    2016-12-01

    The formation of distinct subdomains of the cell surface is crucial for multicellular organism development. The most striking example of this is apical-basal polarization. What is much less appreciated is that underpinning an asymmetric cell surface is an equally dramatic intracellular endosome rearrangement. Here, we review the interplay between classical cell polarity proteins and membrane trafficking pathways, and discuss how this marriage gives rise to cell polarization. We focus on those mechanisms that regulate apical polarization, as this is providing a number of insights into how membrane traffic and polarity are regulated at the tissue level. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. World soccer cup as a trigger of cardiovascular events.

    Science.gov (United States)

    Borges, Daniel Guilherme Suzuki; Monteiro, Rosane Aparecida; Schmidt, André; Pazin-Filho, Antonio

    2013-06-01

    Acute coronary syndromes are the major cause of death in Brazil and in the world. External stimuli, known also as triggers, such as emotional state and activity, may generate physiopathological changes that can trigger acute coronary syndromes. Among the studied triggers, the impact of stressful events, such as soccer championships, are controversial in literature and there is no effective data on the Brazilian population. To evaluate the acute effects of environmental stress induced by soccer games of the World Soccer Cup on increased incidence of cardiovascular diseases in Brazil. Public data were obtained from the Unified Health System (Sistema Único de Saúde), regarding hospital admissions that had the International Code Disease of acute coronary syndromes from May to August, in 1998, 2002, 2006 and 2010 (155,992 admissions). Analysis was restricted to patients older than 35 years and admitted by clinical specialties. The incidence of myocardial infarction, angina and mortality were compared among days without World Cup soccer games (Group I: 144,166; 61.7 ± 12.3; 59.4% males); on days when there were no Brazil's soccer team matches (Group II: 9,768; 61.8 ± 12.3; 60.0% males); and days when there were Brazil's soccer team matches (Group III; 2,058; 61.6 ± 12.6; 57.8% males). Logistic regression was used to adjust to age, gender, population density and number of medical assistance units. The incidence of myocardial infarction increased during the period of World Cup soccer games (1.09; 95%CI = 1.05-1.15) and days when there were Brazil's matches (1.16; 95%CI = 1.06-1.27). There was no impact on mortality during the Cup (1.00; CI 95% = 0.93-1.08) and Brazil's matches (1.04; 95%CI = 0.93-1.22). World Cup soccer games and, specially, Brazil's matches have an impact on the incidence of myocardial infarction, but not on in-hospital mortality.

  17. Segmentation of the Optic Disc and Optic Cup Using Histogram Feature-Based Adaptive Threshold for Cup to Disk Ratio

    Directory of Open Access Journals (Sweden)

    Nugraha Gibran Satya

    2016-01-01

    Full Text Available Glaucoma is a condition of increased intraocular pressure within the eyes. Such increase then causes the damage on optic nerves as the organ bringing information to be processed in brain. One of the parameters to detect the glaucoma is the ratio between the optic cup and optic disc that can be identified through an examination towards the retinal fundus image of the patient. The ratio is obtained by firstly calculating the width of the area of the optic cup and the optic disc. This research was aimed to propose a method of the segmentation of the optic cup and optic disc with the adaptive threshold. The value of the adaptive threshold was obtained once calculating the mean value and standard deviation on the retinal fundus image of the patient. Before conducting the segmentation, the red component of the image would firstly be extracted followed by doing the contrast stretching. The last one was to perform the morphological operation such as closing and opening to remove the blood vessel to make the ratio calculation more accurate. This method has been tested in a number of retinal fundus images coming from DRISTHI-GS and RIM-ONE.

  18. Research on Design Method of Intelligent Vending Machine for Cupped Beverage

    Directory of Open Access Journals (Sweden)

    Xiaowei Jiang

    2014-09-01

    Full Text Available The purpose of this study is to design an intelligent vending machine for cupped beverage, specifically researching its humanized design, shape design, color design and the main mechanism design including the beverage powder transporting mechanism, paper cups detaching mechanism and paper cups slide mechanism. The study elaborates that the design of beverage powder transporting mechanism is mainly the selection of electromagnet and the determination of electromagnet stroke, requiring that the electromagnet stroke and the maximum weight that the electromagnet could bear should have rationality, to ensure its safe operation; the design of paper cups detaching mechanism mainly includes selecting electric motor and V belt; the design of paper cups slide mechanism mainly presents the design of slide structure. And then the design of control modules of the intelligent vending machine for cupped beverage is introduced, based on which the conclusion has been reached.

  19. Multiple data sets and modelling choices in a comparative LCA of disposable beverage cups.

    Science.gov (United States)

    van der Harst, Eugenie; Potting, José; Kroeze, Carolien

    2014-10-01

    This study used multiple data sets and modelling choices in an environmental life cycle assessment (LCA) to compare typical disposable beverage cups made from polystyrene (PS), polylactic acid (PLA; bioplastic) and paper lined with bioplastic (biopaper). Incineration and recycling were considered as waste processing options, and for the PLA and biopaper cup also composting and anaerobic digestion. Multiple data sets and modelling choices were systematically used to calculate average results and the spread in results for each disposable cup in eleven impact categories. The LCA results of all combinations of data sets and modelling choices consistently identify three processes that dominate the environmental impact: (1) production of the cup's basic material (PS, PLA, biopaper), (2) cup manufacturing, and (3) waste processing. The large spread in results for impact categories strongly overlaps among the cups, however, and therefore does not allow a preference for one type of cup material. Comparison of the individual waste treatment options suggests some cautious preferences. The average waste treatment results indicate that recycling is the preferred option for PLA cups, followed by anaerobic digestion and incineration. Recycling is slightly preferred over incineration for the biopaper cups. There is no preferred waste treatment option for the PS cups. Taking into account the spread in waste treatment results for all cups, however, none of these preferences for waste processing options can be justified. The only exception is composting, which is least preferred for both PLA and biopaper cups. Our study illustrates that using multiple data sets and modelling choices can lead to considerable spread in LCA results. This makes comparing products more complex, but the outcomes more robust.

  20. Efficacy of cupping therapy in patients with the fibromyalgia syndrome-a randomised placebo controlled trial

    OpenAIRE

    Romy Lauche; Julia Spitzer; Barbara Schwahn; Thomas Ostermann; Kathrin Bernardy; Holger Cramer; Gustav Dobos; Jost Langhorst

    2016-01-01

    This study aimed to test the efficacy of cupping therapy to improve symptoms and quality of life in patients diagnosed with the fibromyalgia syndrome. Participants were randomly assigned to cupping therapy, sham or usual care. Cupping was administered five times at twice weekly intervals on the upper and lower back. The primary outcome measure was pain intensity at day 18. Secondary outcomes included functional disability, quality of life, fatigue and sleep quality as well as pressure pain se...

  1. Köebner phenomenon induced by cupping therapy in a psoriasis patient.

    Science.gov (United States)

    Yu, Rui-Xing; Hui, Yun; Li, Cheng-Rang

    2013-06-15

    Psoriasis is a chronic, immune-mediated inflammatory and refractory disease. The koebner phenomenon, which can be induced by trauma, is common in psoriasis patients. Herein, we report a patient with psoriasis who was treated by cupping therapy and subsequently developed the koebner phenomenon (KP) at the cupped sites. To our knowledge, it is the first report about cupping therapy leading to KP in a psoriasis patient.

  2. [Analysis on the adverse events of cupping therapy in the application].

    Science.gov (United States)

    Zhou, Xin; Ruan, Jing-wen; Xing, Bing-feng

    2014-10-01

    The deep analysis has been done on the cases of adverse events and common injury of cupping therapy encountered in recent years in terms of manipulation and patient's constitution. The adverse events of cupping therapy are commonly caused by improper manipulation of medical practitioners, ignoring contraindication and patient's constitution. Clinical practitioners should use cupping therapy cautiously, follow strictly the rules of standard manipulation and medical core system, pay attention to the contraindication and take strict precautions against the occurrence of adverse events.

  3. Köebner phenomenon induced by cupping therapy in a psoriasis patient

    OpenAIRE

    Yu, Rui-Xing; Hui, Yun; Li, Cheng-Rang

    2013-01-01

    Psoriasis is a chronic, immune-mediated inflammatory and refractory disease. The koebner phenomenon, which can be induced by trauma, is common in psoriasis patients. Herein, we report a patient with psoriasis who was treated by cupping therapy and subsequently developed the koebner phenomenon (KP) at the cupped sites. To our knowledge, it is the first report about cupping therapy leading to KP in a psoriasis patient.

  4. Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

    OpenAIRE

    Ángel Sanz-Andrés; Santiago Pindado; Félix Sorribes-Palmer

    2014-01-01

    The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied. The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction. The comparison with the experimental data indicates a nonuniform distribution of aerodynamic f...

  5. [Nonsurgical retreatment in a case of a radiolucent apical lesion].

    Science.gov (United States)

    Vicente Gómez, A; Rodríguez Ponce, A

    1989-01-01

    We present a case of failure that was helpful solved without surgical endodontic treatment. We don't achieve clinical success besides endodontic treatment was twice remade. Finally we decided to put a temporary filling with calcium hydroxide and wait until apical radiolucency disappear and complete our treatment with gutta-percha, sealer and lateral condensation.

  6. Assessment of apical periodontitis by MRI. A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Geibel, M.A. [Ulm Univ. (Germany). Oral and Maxillofacial Surgery; Schreiber, E.S.; Bracher, A.K.; Rasche, V. [Ulm Univ. (Germany). Internal Medicine II; Hell, E.; Ulrici, J. [Sirona Dental Systems GmbH, Bensheim (Germany). Dental Imaging; Sailer, L.K. [DOC Praxisklinik im Wiley, Neu-Ulm (Germany). MKG; Ozpeynirci, Y. [Ulm Univ. (Germany). Diagnostic and Interventional Radiology

    2015-04-15

    The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

  7. Hypertrophic cardiomyopathy with apical left ventricular aneurysm: a case report

    Institute of Scientific and Technical Information of China (English)

    江腾勇; 韩智红; 王京; 吕强; 吴学思

    2002-01-01

    @@ Morphological diversity is one characteristic of hypertrophic cardi omyopathy (HCM), but it is not common that HCM is associated with apical left ve ntricular aneurysm (LVA) without evidence of a coronary artery lesion. We repor t on such a case and review the pathogenesis, manifestations and diagnostic meth ods by collecting the few available papers published on this topic.

  8. Apical vault repair, the cornerstone or pelvic vault reconstruction.

    Science.gov (United States)

    Ross, J W

    1997-01-01

    Pelvic organ prolapse remains a difficult problem for pelvic reconstructive surgery. Before new surgical procedures can be developed a good understanding of pelvic anatomy is necessary. It is widely held that the etiology of pelvic organ prolapse is secondary to stretch neuropathy following childbirth and chronic cough or constipation. Several transvaginal and transabdominal procedures have been developed over the years. With the increasing use of laparoscopy, a new variation on existing culdeplasty techniques has been developed. Following anatomical principles, the apical vault repair reestablishes the pericervical ring at the vaginal apex. The incorporation of pubocervical fascia, uterosacral-cardinal ligament and the rectovaginal fascia provides a strong anchor for the vaginal apex. In addition, the repair should help prevent future transverse cystocele, rectocele, enterocele and apical vault prolapse. Early outcome studies suggest that the apical vault repair should be used routinely with laparoscopic urethropexy, laparoscopic hysterectomy and the repair of pelvic organ prolapse. Good apical vault support is considered the cornerstone of pelvic reconstruction.

  9. The apical plasma membrane of chitin-synthesizing epithelia

    Institute of Scientific and Technical Information of China (English)

    Bernard Moussian

    2013-01-01

    Chitin is the second most abundant polysaccharide on earth.It is produced at the apical side of epidermal,tracheal,fore-,and hindgut epithelial cells in insects as a central component of the protective and supporting extracellular cuticle.Chitin is also an important constituent of the midgut peritrophic matrix that encases the food supporting its digestion and protects the epithelium against invasion by possibly ingested pathogens.The enzyme producing chitin is a glycosyltransferase that resides in the apical plasma membrane forming a pore to extrude the chains of chitin into the extracellular space.The apical plasma membrane is not only a platform for chitin synthases but,probably through its shape and equipment with distinct factors,also plays an important role in orienting and organizing chitin fibers.Here,I review findings on the cellular and molecular constitution of the apical plasma membrane of chitin-producing epithelia mainly focusing on work done in the fruit fly Drosophila melanogaster.

  10. Apical root resorption after orthodontic treatment -- a retrospective study.

    Science.gov (United States)

    Apajalahti, Satu; Peltola, Jaakko Sakari

    2007-08-01

    The purpose of the study was to compare the incidence and severity of apical root resorption in patients treated with different orthodontic appliances and to evaluate the effect of treatment duration on the degree of apical root resorption. A further aim was to analyse the degree of apical root resorption in different tooth groups in patients presenting with root resorption. The sample consisted of 625 patients (269 males, 356 females) aged 8-16 years at the beginning of treatment. Active removable plates and fixed appliances were used most frequently. Following exclusion of poor quality radiographs, the final sample included 601 patients (348 females, 253 males). Root resorption in all tooth groups, except third molars, was evaluated from pre- and post-treatment panoramic radiographs. The correlation of root resorption with treatment modality and duration was studied using multinomial logistic regression analysis. Of the tooth groups, maxillary incisors showed apical root resorption most frequently, followed by the mandibular incisors. Root resorption was significantly correlated with fixed appliance treatment (P resorption. The mean duration of treatment in patients without root resorption was 1.5 years, whereas in those with severe resorption was 2.3 years. The most severe resorption was seen in the maxillary incisors and premolars. It is concluded that with a long duration of fixed appliance treatment, the risk of severe resorption increases. In patients where treatment is prolonged, a 6-month radiographic follow-up is recommended.

  11. Chapter Four - Shoot apical meristem form and function. In:

    Science.gov (United States)

    The shoot apical meristem (SAM) generates above-ground aerial organs throughout the lifespan of higher plants. In order to fulfill this function, the meristem must maintain a balance between the self-renewal of a reservoir of central stem cells and organ initiation from peripheral cells. The activit...

  12. Development of the ciliary body: morphological changes in the distal portion of the optic cup in the human.

    Science.gov (United States)

    Peces-Peña, M D; de la Cuadra-Blanco, C; Vicente, A; Mérida-Velasco, J R

    2013-01-01

    This study seeks to determine the main events that occur in the development of the ciliary body (CB) in the 5-14th week of development. The CB develops from the distal portion of the optic cup (OC) and the neighboring mesenchyme. During the 5th week of development, 4 zones were observed in the distal portion of the OC: in zone 1, the epithelia of the outer and inner layers of the OC came into contact. This contact coincided with the appearance of mainly apical granule pigments. This zone corresponded to the anlage of the epithelial layers of the CB. In zone 2, the cells surrounded the marginal sinus and contained scarce pigment granules and nuclei in the basal position. This zone corresponded to the anlage of the iris. Zone 3 was triangular in shape and its vertex ran towards the marginal sinus and corresponded to common cell progenitors. Zone 4 corresponded to the retinal pigment epithelium anlage and the neural retina anlage. We determined the onset of the stroma and the ciliary muscle anlage at the end of the 7th week. In the 13-14th week, we observed the anlage of the orbicularis ciliaris (pars plana of the CB) and corona ciliaris (pars plicata of the CB), in addition to the anlage of the ciliary muscle. Our study, therefore, establishes a precise timetable of the development of the CB.

  13. [Poor results in 183 threaded acetabular cups at a mean 7 years follow-up].

    Science.gov (United States)

    Lecestre, P; Poilbout, P; Dambreville, A; Vial, D

    1995-12-01

    We reviewed 183 threaded rings at a mean 7 years follow-up. Poor résults are frequent: 34 % had been revised and 50 % have radiographic migration, essentially with proximal migration of the cup. Generally, we reoperated with other cememtless implants. The type of threaded cup does not matter (spheric or conic). Only the duration of follow up seems significant. We think that biomecanical strains, rather than physiology, explain these numerous migrations. We have therefore abandoned threaded cups in favour of porous-coated impacted cups.

  14. Plastic cup traps equipped with light-emitting diodes for monitoring adult Bemisia tabaci (Homoptera: Aleyrodidae).

    Science.gov (United States)

    Chu, Chang-Chi; Jackson, Charles G; Alexander, Patrick J; Karut, Kamil; Henneberry, Thomas J

    2003-06-01

    Equipping the standard plastic cup trap, also known as the CC trap, with lime-green light-emitting diodes (LED-plastic cup trap) increased its efficacy for catching Bemisia tabaci by 100%. Few Eretmocerus eremicus Rose and Zolnerowich and Encarsia formosa Gahan were caught in LED-plastic cup traps. The LED-plastic cup traps are less expensive than yellow sticky card traps for monitoring adult whiteflies in greenhouse crop production systems and are more compatible with whitefly parasitoids releases for Bemisia nymph control.

  15. CLINICAL EFFECTIVENESS OF TREATMENT THE PATIENTS WITH CHRONIC APICAL PERIODONTITIS

    Directory of Open Access Journals (Sweden)

    N. G. Gadzhula

    2017-02-01

    Full Text Available Background. The success of endodontic treatment is provided by a thorough instrumental and antiseptic treatment of infected root canals, and it depends on the composition of filling material, the degree of adhesion to dentin, hermetic obturation of apical foramen, solubility of sealer. Objective. The study was aimed to evaluate the effectiveness of root canal obturation with BioRootTM RCS sealer in the treatment of patients with chronic apical periodontitis. Methods. Endodontic treatment of 23 teeth in 20 patients with chronic apical periodontitis by method of lateral compaction of gutta-percha was carried out. In the main group root canals were obturated with BioRootTM RCS, in the control group the canals were filled with Apexit Plus. The percentage of efficient or non-efficient cases was evaluated on the basis of radiographic comparison of treated chronic apical periodontitis immediately after obturation, in three, six months and one year. Radiographic conditions were defined as existing state, improvement and worsening. Results. In a year of dynamic evaluation the final results were: in the main group – 54.55% of the patients had complete bone healing, in 27.27% of cases the focus of bone destruction was decreased by ½ or more of the initial sizes, 18.18% – resorption lesion was decreased by less than ½; in the control group – 33.33% of improvement, 25.0% of existing state and 41.66% of worsening. Conclusions. BioRootTM RCS using for root canals obturation in the treatment of chronic apical periodontitis we proved the high effectiveness of the treatment undertaken: complete healing or improvement of radiographic conditions of periapical bone destruction with X-ray signs of bone regeneration.

  16. The DHL EuroCup: shots on goal.

    Science.gov (United States)

    Hemp, Paul

    2003-11-01

    Deutsche Post World Net, the German postal monopoly, faced significant challenges as it began the process of integrating three businesses: Deutsche Post Euro Express, its own ground-based parcel delivery service, and two companies it had acquired-DHL, the worldwide express delivery service, and Danzas, a worldwide air and ocean freight company. The cultural differences alone were imposing. For example, DHL was a privately held, entrepreneurial company in which most managers had international experience; Deutsche Post was until recently a state-owned monopoly in which few managers had worked outside their home country. Enter EuroCup. For 20 years, DHL employees had held a soccer tournament to strengthen company culture across national boundaries. Canceled the previous year due to budget constraints, the EuroCup tournament was revived in 2003-in part to help with the postmerger integration. But did the event really help? HBR senior editor Paul Hemp attended EuroCup 2003, joining nearly 2,500 DHL employees--about 600 of them players, the rest cheerleaders and other supporters--in the small Belgian town of Lommel. He set out to answer a number of questions relevant to any company staging an ambitious off-site intended to encourage teamwork and boost morale. How does a company determine whether such a large-scale event, even one that generates goodwill, is worth the investment? Does the team building extend to those back home who don't get to attend? Can intense competition between teams begin to overshadow the spirit of cooperation that such an event is meant to engender? In short, can a soccer tournament help a company achieve its corporate goal of creating a strong common culture?

  17. Power output during women's World Cup road cycle racing.

    Science.gov (United States)

    Ebert, Tammie R; Martin, David T; McDonald, Warren; Victor, James; Plummer, John; Withers, Robert T

    2005-12-01

    Little information exists on the power output demands of competitive women's road cycle racing. The purpose of our investigation was to document the power output generated by elite female road cyclists who achieved success in FLAT and HILLY World Cup races. Power output data were collected from 27 top-20 World Cup finishes (19 FLAT and 8 HILLY) achieved by 15 nationally ranked cyclists (mean +/- SD; age: 24.1+/-4.0 years; body mass: 57.9+/-3.6 kg; height: 168.7+/-5.6 cm; VO2max 63.6+/-2.4 mL kg(-1) min(-1); peak power during graded exercise test (GXT(peak power)): 310+/-25 W). The GXT determined GXT(peak power), VO2peak lactate threshold (LT) and anaerobic threshold (AT). Bicycles were fitted with SRM powermeters, which recorded power (W), cadence (rpm), distance (km) and speed (km h(-1)). Racing data were analysed to establish time in power output and metabolic threshold bands and maximal mean power (MMP) over different durations. When compared to HILLY, FLAT were raced at a similar cadence (75+/-8 vs. 75+/-4 rpm, P=0.93) but higher speed (37.6+/-2.6 vs. 33.9+/-2.7 km h(-1), P=0.008) and power output (192+/-21 vs. 169+/-17 W, P=0.04; 3.3+/-0.3 vs. 3.0+/-0.4 W kg(-1), P=0.04). During FLAT races, riders spent significantly more time above 500 W, while greater race time was spent between 100 and 300 W (LT-AT) for HILLY races, with higher MMPs for 180-300 s. Racing terrain influenced the power output profiles of our internationally competitive female road cyclists. These data are the first to define the unique power output requirements associated with placing well in both flat and hilly women's World Cup cycling events.

  18. Analysis of bone ingrowth on a tantalum cup

    Directory of Open Access Journals (Sweden)

    D′Angelo F

    2008-01-01

    Full Text Available Background: Trabecular Metal (TM is a new highly porous material made of tantalum (Zimmer, Warsaw, Indiana, USA. Its three-dimensional structure is composed of a series of interconnected dodecahedron pores that are on average 550 μm in diameter. This size is considered optimal for bone ingrowth and is similar to trabecular bone. The elastic modulus of TM (3 GPa is more similar to that of cancellous (0,1-1,5 GPa or cortical (112-18 GPa bone and is significantly less similar to that of Titanium (110 GPa and Co-Cr alloys (220 GPa. These features enable bone apposition and remodeling. The purpose of the present study was to evaluate the histology of the bone-implant interface in a human specimen. Materials and Methods: A highly porous tantalum cup (Zimmer, Warsaw, Indiana, USA was removed for recurrent dislocations three years after implantation. In order to obtain a slice of the cup, two cuts were made on the centre using an Exakt cutting machine. Then the slice was embedded in a Technovit resin and a Hematoxylin-eosin stain was used to study the bone tissue. Bone ingrowth was calculated using a method based on simple calculations of planar geometry. Results: The histological evaluation of the periprosthetic tissues revealed a typical chronic inflammation with few particles of polyethylene that were birefringent using polarized light. The quantitative evaluation of bone ingrowth revealed that more than 95% of voids were filled with bone. Discussion: In the literature, a lot of studies focused on tantalum were carried on animal model. Up to now little information is available about the histology of the bone-tantalum interface in a human artificial joint. We had an opportunity to remove a well integrated cup hence this study. The histology confirmed the strong relationship between the structure of this material and bone. The morphometric analysis revealed a high percentage of bone ingrowth.

  19. Sequence assembly

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

    2009-01-01

    Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies...

  20. Speech teams of wrestling at the European Nations Cup 2015

    Directory of Open Access Journals (Sweden)

    Pavel Panov

    2015-12-01

    Full Text Available Purpose: to analyze the performance of national teams of wrestling at the European Nations Cup in 2015. Material and Methods: the analysis of 208 wrestlers highly. Results: determined that, among other factors, the advantage of the strongest wrestlers is successful and stable use of technical and tactical actions during the fight and the ability to impose his opponent style of fighting. Conclusions: it was found that in the competitive technology dominated the offensive, the fight is ongoing at a fast pace, techniques are performed after prior training and if the athlete is confident that the reception will be executed

  1. SMIT2 mediates all myo-inositol uptake in apical membranes of rat small intestine

    National Research Council Canada - National Science Library

    Rym Aouameur; Sandra Da Cal; Pierre Bissonnette; Michael J. Coady; Jean-Yves Lapointe

    2007-01-01

    ...; rabbit intestine appears to lack apical transport of MI. Other sugar transport systems known to be present in apical membranes, such as SGLT1 or GLUT5, lacked any significant contribution to MI uptake...

  2. Clinical research evidence of cupping therapy in China: a systematic literature review

    Directory of Open Access Journals (Sweden)

    Wang Qian

    2010-11-01

    Full Text Available Abstract Background Though cupping therapy has been used in China for thousands of years, there has been no systematic summary of clinical research on it. This review is to evaluate the therapeutic effect of cupping therapy using evidence-based approach based on all available clinical studies. Methods We included all clinical studies on cupping therapy for all kinds of diseases. We searched six electronic databases, all searches ended in December 2008. We extracted data on the type of cupping and type of diseases treated. Results 550 clinical studies were identified published between 1959 and 2008, including 73 randomized controlled trials (RCTs, 22 clinical controlled trials, 373 case series, and 82 case reports. Number of RCTs obviously increased during past decades, but the quality of the RCTs was generally poor according to the risk of bias of the Cochrane standard for important outcome within each trials. The diseases in which cupping was commonly employed included pain conditions, herpes zoster, cough or asthma, etc. Wet cupping was used in majority studies, followed by retained cupping, moving cupping, medicinal cupping, etc. 38 studies used combination of two types of cupping therapies. No serious adverse effects were reported in the studies. Conclusions According to the above results, quality and quantity of RCTs on cupping therapy appears to be improved during the past 50 years in China, and majority of studies show potential benefit on pain conditions, herpes zoster and other diseases. However, further rigorous designed trials in relevant conditions are warranted to support their use in practice.

  3. A very special visit to ATLAS: America's Cup Winner Team Alinghi

    CERN Multimedia

    Jenni, P

    It is an honour for ATLAS to frequently welcome in its cavern and the assembly sites VIP visits by Heads of State, Ministers, Directors of Funding Agencies and other political dignitaries. Rarely, however, have we had such an illustrious and competent visitor group as on December 3rd, 2003, when the full Research and Design Team from the Swiss America's Cup Team Alinghi looked at the ATLAS integration work in Halls 180 and 191 and visited Pit-1. The Team was led by 'their' Technical Coordinator Grant Simmer and principal designer Rolf Vrolijk. The Alinghi R&D team spans a very broad range of engineering and management competence; just to list a few of the team's special skills: mechanical and material engineering, electronics and software engineering, sail design, construction management, performance analysis and predictions, and last but not least direct feedback from the actual sailing team (strategist Murray Jones). Amazingly there are a lot of commonalities between Team Alinghi and ATLAS which made...

  4. Design of Faraday cup ion detectors built by thin film deposition

    Science.gov (United States)

    Szalkowski, G. A.; Darrow, D. S.; Cecil, F. E.

    2017-03-01

    Thin film Faraday cup detectors can provide measurements of fast ion loss from magnetically confined fusion plasmas. These multilayer detectors can resolve the energy distribution of the lost ions in addition to giving the total loss rate. Prior detectors were assembled from discrete foils and insulating sheets. Outlined here is a design methodology for creating detectors using thin film deposition that are suited to particular scientific goals. The intention is to use detectors created by this method on the Joint European Torus (JET) and the National Spherical Torus Experiment-Upgrade (NSTX-U). The detectors will consist of alternating layers of aluminum and silicon dioxide, with layer thicknesses chosen to isolate energies of interest. Thin film deposition offers the advantage of relatively simple and more mechanically robust construction compared to other methods, as well as allowing precise control of film thickness. Furthermore, this depositional fabrication technique places the layers in intimate thermal contact, providing for three-dimensional conduction and dissipation of the ion-produced heating in the layers, rather than the essentially two-dimensional heat conduction in the discrete foil stack implementation.

  5. Implantation of a left ventricular assist device in patients with a complex apical anatomy.

    Science.gov (United States)

    Palmen, Meindert; Verwey, Harriette F; Haeck, Marlieke L A; Holman, Eduard R; Schalij, Martin J; Klautz, Robert J M

    2012-12-01

    Implantation of a left ventricular assist device can be challenging in patients with an altered apical anatomy after cardiac surgery or as the result of the presence of a calcified apical aneurysm. In this paper we present 2 cases with a challenging apical anatomy and introduce a new surgical technique facilitating left ventricular assist device implantation in these patients.

  6. A membrane fusion protein αSNAP is a novel regulator of epithelial apical junctions.

    Directory of Open Access Journals (Sweden)

    Nayden G Naydenov

    Full Text Available Tight junctions (TJs and adherens junctions (AJs are key determinants of the structure and permeability of epithelial barriers. Although exocytic delivery to the cell surface is crucial for junctional assembly, little is known about the mechanisms controlling TJ and AJ exocytosis. This study was aimed at investigating whether a key mediator of exocytosis, soluble N-ethylmaleimide sensitive factor (NSF attachment protein alpha (αSNAP, regulates epithelial junctions. αSNAP was enriched at apical junctions in SK-CO15 and T84 colonic epithelial cells and in normal human intestinal mucosa. siRNA-mediated knockdown of αSNAP inhibited AJ/TJ assembly and establishment of the paracellular barrier in SK-CO15 cells, which was accompanied by a significant down-regulation of p120-catenin and E-cadherin expression. A selective depletion of p120 catenin effectively disrupted AJ and TJ structure and compromised the epithelial barrier. However, overexpression of p120 catenin did not rescue the defects of junctional structure and permeability caused by αSNAP knockdown thereby suggesting the involvement of additional mechanisms. Such mechanisms did not depend on NSF functions or induction of cell death, but were associated with disruption of the Golgi complex and down-regulation of a Golgi-associated guanidine nucleotide exchange factor, GBF1. These findings suggest novel roles for αSNAP in promoting the formation of epithelial AJs and TJs by controlling Golgi-dependent expression and trafficking of junctional proteins.

  7. Extended higher cup-product Chern-Simons theories

    CERN Document Server

    Fiorenza, Domenico; Schreiber, Urs

    2013-01-01

    It is well known that the proper action functional of (4k+3)-dimensional U(1)-Chern-Simons theory including the instanton sectors is given on gauge equivalence classes of fields by the fiber integration of the cup product square of classes in degree-(2k+2) differential cohomology. We first refine this statement from gauge equivalence classes to the full higher smooth moduli stack of fields, to which the higher-order-ghost BRST complex is the infinitesimal approximation. Then we generalize the refined formulation to cup product Chern-Simons theories of nonabelian and higher nonabelian gauge fields, such as the nonabelian String^c-2-connections appearing in quantum-corrected 11-dimensional supergravity and M-branes. We discuss aspects of the off-shell extended geometric pre-quantization (in the sense of extended or multi-tiered QFT) of these theories, where there is a prequantum circle k-bundle (equivalently: (k-1)-bundle gerbe) in each codimension k. Examples we find include moduli stacks for differential T-du...

  8. Extended higher cup-product Chern-Simons theories

    Science.gov (United States)

    Fiorenza, Domenico; Sati, Hisham; Schreiber, Urs

    2013-12-01

    The proper action functional of (4k+3)-dimensional U(1)-Chern-Simons theory including the instanton sectors has a well known description: it is given on the moduli space of fields by the fiber integration of the cup product square of classes in degree-(2k+2) differential cohomology. We first refine this statement from the moduli space to the full higher smooth moduli stack of fields, to which the higher-order-ghost BRST complex is the infinitesimal approximation. Then we generalize the refined formulation to cup product Chern-Simons theories of nonabelian and higher nonabelian gauge fields, such as the nonabelian String-2-connections appearing in quantum-corrected 11-dimensional supergravity and M-branes. We discuss aspects of the off-shell extended geometric prequantization (in the sense of extended or multi-tiered QFT) of these theories, where there is a prequantum U(1)-k-bundle (equivalently: a U(1)-(k - 1)-bundle gerbe) in each codimension k. Examples we find include moduli stacks for differential T-duality structures as well as the anomaly line bundles of higher electric/magnetic charges, such as the 5-brane charges appearing in heterotic supergravity, appearing as line bundles with connection on the smooth higher moduli stacks of field configurations.

  9. Through-flow of water in leaves of a submerged plant is influenced by the apical opening

    DEFF Research Database (Denmark)

    Pedersen, Ole; Jørgensen, Lise Bolt; Sand-Jensen, Kaj

    1997-01-01

    Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity......Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity...

  10. A high rate of injury during the 1995 Rugby World Cup

    African Journals Online (AJOL)

    Art c I e s. A high rate of injury during the 1995 Rugby World Cup. Ismail Jakoet, Timothy ... Exercise Research Unit, Sports Science Institute of South Africa, ... The Rugby World Cup, contested every 4 years since 1987, ..... This prediction has.

  11. FIFA World Cup 2018: An Ex Ante Input Output Analysis for the Netherlands

    NARCIS (Netherlands)

    Heijman, W.J.M.; Jongenburger, B.

    2011-01-01

    Together with Belgium, the Netherlands was one of the candidates to host the FIFA World Cup 2018. There is an ongoing debate about whether this event would have been beneficiary for the Netherlands. Several studies point out that the expected benefits for previous FIFA World Cups did not materialize

  12. Acquisition of cup drinking using previously refused foods as positive and negative reinforcement.

    OpenAIRE

    Kelley, Michael E; Piazza, Cathleen C; Fisher, Wayne W; Oberdorff, Amanda J

    2003-01-01

    We used previously refused foods as positive and negative reinforcement in the acquisition of cup drinking. Cup drinking increased with positive and negative reinforcement, both alone and in combination (without escape extinction), indicating that treatment of food refusal can establish some foods as appetitive stimuli whereas others remain aversive.

  13. 78 FR 57482 - Safety Zone; America's Cup Aerobatic Box, San Francisco Bay, San Francisco, CA

    Science.gov (United States)

    2013-09-19

    ... government and the States, or on the distribution of power and responsibilities among the various levels of... Sector San Francisco; telephone (415) 399-3585 or email at D11-PF-MarineEvents@uscg.mil . If you have... ``America's Cup World Series'' regattas in 2012 and the ``Louis Vuitton Cup,'' ``Red Bull Youth America's...

  14. Facility arrangements, food safety, and the environmental performance of disposable and reusable cups

    NARCIS (Netherlands)

    Potting, J.; Harst, van der E.J.M.

    2014-01-01

    Conventional disposable cups, made of fossil-based plastic or paper with inner lining of fossil-based plastic, are typically associated with an unnecessary use of scarce resources and a superfluous production of waste. An alternative has become available in disposable cups from bio-based and biodegr

  15. Facility arrangements and the environmental performance of disposable and reusable cups

    NARCIS (Netherlands)

    Potting, José; Harst-Wintraecken, van der Eugenie

    2015-01-01

    Purpose: This paper integrates two complementary life cycle assessment (LCA) studies with the aim to advice facility managers on the sustainable use of cups, either disposable or reusable. Study 1 compares three disposable cups, i.e., made from fossil-based polystyrene (PS), biobased and composta

  16. Finite element analysis of the long-term fixation strength of cemented ceramic cups.

    NARCIS (Netherlands)

    Janssen, D.; Stolk, J.; Verdonschot, N.J.J.

    2006-01-01

    Clinical studies have shown that adequate fixation of ceramic cups using bone cement is difficult to achieve. As the cement-ceramic bond strength is low, a satisfactory fixation strength requires a cup design that allows mechanical interlocking, although such a design will probably promote cement

  17. Assessment of the behaviour of potatoes in a cup-belt planter

    NARCIS (Netherlands)

    Buitenwerf, H.A.; Hoogmoed, W.B.; Lerink, P.; Muller, J.

    2006-01-01

    The functioning of most potato planters is based on transport and placement of the seed potatoes by a cup-belt. The capacity of this process is rather low when planting accuracy has to stay at acceptable levels. The main limitations are set by the speed of the cup-belt and the number and positioning

  18. 76 FR 58108 - Safety Zone; Ryder Cup Captain's Duel Golf Shot, Chicago River, Chicago, IL

    Science.gov (United States)

    2011-09-20

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Ryder Cup Captain's Duel Golf Shot, Chicago.... Background and Purpose The Ryder Cup Captain's Duel Golf Shot event takes place on the Chicago River near... ambiguity, and reduce burden. Protection of Children We have analyzed this rule under Executive Order...

  19. Effects of metal-inlay thickness in polyethylene cups with metal-on-metal bearings.

    NARCIS (Netherlands)

    Verdonschot, N.J.J.; Vena, P.; Stolk, J.; Huiskes, R.

    2002-01-01

    A way to prevent polyethylene wear in total hip replacements is to use metal-on-metal bearings. The cup design of these bearings may be a metal inlay in a polyethylene cup. However, these metal inlays are relatively thin and may deform on loading. The purpose of the current study was to determine wh

  20. Faraday cup with nanosecond response and adjustable impedance for fast electron beam characterization.

    Science.gov (United States)

    Hu, Jing; Rovey, Joshua L

    2011-07-01

    A movable Faraday cup design with simple structure and adjustable impedance is described in this work. This Faraday cup has external adjustable shunt resistance for self-biased measurement setup and 50 Ω characteristic impedance to match with 50 Ω standard BNC coaxial cable and vacuum feedthroughs for nanosecond-level pulse signal measurements. Adjustable shunt resistance allows self-biased measurements to be quickly acquired to determine the electron energy distribution function. The performance of the Faraday cup is validated by tests of response time and amplitude of output signal. When compared with a reference source, the percent difference of the Faraday cup signal fall time is less than 10% for fall times greater than 10 ns. The percent difference of the Faraday cup signal pulse width is below 6.7% for pulse widths greater than 10 ns. A pseudospark-generated electron beam is used to compare the amplitude of the Faraday cup signal with a calibrated F-70 commercial current transformer. The error of the Faraday cup output amplitude is below 10% for the 4-14 kV tested pseudospark voltages. The main benefit of this Faraday cup is demonstrated by adjusting the external shunt resistance and performing the self-biased method for obtaining the electron energy distribution function. Results from a 4 kV pseudospark discharge indicate a "double-humped" energy distribution.

  1. Apical versus Basal Neurogenesis Directs Cortical Interneuron Subclass Fate

    Directory of Open Access Journals (Sweden)

    Timothy J. Petros

    2015-11-01

    Full Text Available Fate determination in the mammalian telencephalon, with its diversity of neuronal subtypes and relevance to neuropsychiatric disease, remains a critical area of study in neuroscience. Most studies investigating this topic focus on the diversity of neural progenitors within spatial and temporal domains along the lateral ventricles. Often overlooked is whether the location of neurogenesis within a fate-restricted domain is associated with, or instructive for, distinct neuronal fates. Here, we use in vivo fate mapping and the manipulation of neurogenic location to demonstrate that apical versus basal neurogenesis influences the fate determination of major subgroups of cortical interneurons derived from the subcortical telencephalon. Somatostatin-expressing interneurons arise mainly from apical divisions along the ventricular surface, whereas parvalbumin-expressing interneurons originate predominantly from basal divisions in the subventricular zone. As manipulations that shift neurogenic location alter interneuron subclass fate, these results add an additional dimension to the spatial-temporal determinants of neuronal fate determination.

  2. [Pulmonary hydatid cyst: unusual double apical location. About a case].

    Science.gov (United States)

    Sajiai, Hafsa; Rachidi, Mariam; Aitbatahar, Salma; Serhane, Hind; Amro, Lamyae

    2016-01-01

    Hydatid cyst (KH) is still endemic in several areas of Morocco. Pulmonary involvement is a consequence of liver disease. Hydatid cyst is characterized by diverse anatomical and clinical presentations and by the possibility of multiple locations within the lung parenchyma, predominantly involving pulmonary bases. We report the case of Mr J. M, 54 years old, admitted with suspected pulmonary hydatid cyst based on chest pain lasting for six months and an episode of hydatidoptysis. Chest x-ray objectified a double apical location suggesting different stages of evolution for pulmonary hydatid cyst. The diagnosis was confirmed by thoracic CTscan and hydatid serology. Multiple pulmonary hydatid cyst is not rare in areas in which hydatid disease is highly endemic. Our study reports an unusual double apical location of hydatid cyst at various stages of evolution.

  3. [An endodontic ultrasonic system for apical endodontic surgery].

    Science.gov (United States)

    de Lange, I; Putters, T; Baas, E M; van Ingen, J M

    2009-09-01

    Apical endodontic surgery is applied frequently following a failed conventional endodontic treatment. The apical preparation can be carried out conventionally using a round bur or using an endodontic ultrasonic system. The purpose of this study was to compare the outcome of the 2 treatment options by a randomized prospective clinical study. Patients (n=399) were at random allocated to treatment using a conventional round bur or using an ultrasonic system (P-max Newtron) according to a for the rest similar treatment protocol. One year post treatment, the treatment outcomes were determined by 2 oral and maxillofacial surgeons, blinded for the treatment option. Adequate follow-up data were obtained from 290 patients. The overall success rate was 71% in the patients treated conventionally and 81% in the patients treated using the ultrasonic system. In molar teeth, the difference in success rate was statistically significant.

  4. The Effect of Canal Contamination with Saliva on Apical Sealing

    Directory of Open Access Journals (Sweden)

    S Sabaghi

    2014-08-01

    Methods: In this laboratory study, 58 human uni-root teeth were cleaned and shaped for obturation with gutta percha and sealer AH26. In the case group, specimens were contaminated with human saliva immediately before obturation, whereas the teeth in the control group were kept dry. All canals were filled by lateral condensation technique. Moreover, the teeth were placed in methylene blue dye for 3 days. Dye penetration was measured using a stereomicrosope. As a matter of fact, the study data were analyzed via utilizing t-test. Results: A significant difference was found between the two groups in regard with the apical leakage(P<0.001. The microleakage mean of dye in the dry group was 3/48mm, whereas it was 6/36mm in the saliva contaminated group. Conclusion: The study findings revealed that complete drying of canal can improve apical sealing.

  5. Transient apical dyskinesia with a pacemaker: Electrocardiographic features.

    Science.gov (United States)

    Núñez-Gil, Iván J; Feltes, Gisela I; Mejía-Rentería, Hernán D; Biagioni, Corina; De Agustín, J Alberto; Vivas, David; Fernández-Ortiz, Antonio

    2015-04-01

    Transient apical dyskinesia syndromes present features similar to acute coronary syndromes, but with normal coronary arteries and rapid complete resolution of wall motion alterations. We report the case of a 73-year-old woman who was admitted to hospital because of typical chest pain at rest after her brother's death. She had had a pacemaker implanted in 2001. Troponin levels were elevated and apical hypokinesia was shown by ventriculography and echocardiography, with normal coronary arteries. Evolving ECG alterations were observed in spite of the continued pacing rhythm. All these alterations were fully resolved after discharge. This case shows that, even in the presence of a pacemaker, evolving ECG alterations can be observed in Takotsubo syndrome.

  6. Apical ballooning-like syndrome: Hypocalcemia? What else!

    Directory of Open Access Journals (Sweden)

    Maria Accadia

    2016-01-01

    Full Text Available Apical ballooning syndrome (ABS, also known as Takotsubo or stress cardiomyopathy, is characterised by acute, transient and severe LV dysfunction, mimicking myocardial infarction; it occurs, in most cases, in the absence of obstructive coronary disease and is precipitated by severe emotional or physical stress, but many other potential triggers has been identi ed in the last years. Although the pathogenesis of ABS remains unclear, the most common mechanisms suggested are coronary vasospam and an exaggerated sympathetic activation associated to high levels of plasma cathecolamine leading to cardiotoxicity.We describe two cases of Apical Ballooning like Syndrome that were triggered by severe, acute hypocalcemia, without evidence of coronary vasospasm and with normal hematic level of cathecolamines.

  7. Aseptic multiplication of banana from excised floral apices.

    Science.gov (United States)

    Cronauer, S S; Krikorian, A D

    1985-08-01

    Most economically important bananas and plantains are large triploid seedless herbs that must be propagated vegetatively by removing small side shoots or "suckers" from the parent plant or by planting seed pieces of larger corms. Consequently, multiplication of stock material is time consuming, Recently, the rapid production of young banana plantlets suitable for use as "seed" material has been described. Vegetative shoot apices were isolated and multiplied using aseptic tissue culture techniques. Although these multiplication systems, once established, can produce thousands of plants in a relatively short period of time, their establishment necessitates the initial sacrifice of an individual specimen, which may not always be desirable or prudent should a limited parent stock be available. We describe here the production and multiplication of rooted banana plantlets from the isolation and culture of terminal floral apices.

  8. Blunt apical dissection during anatomic radical retropubic prostatectomy

    Directory of Open Access Journals (Sweden)

    Yacoub Saif

    2009-02-01

    Full Text Available Abstract Background Meticulous apical dissection during a radical prostatectomy is imperative to achieve desirable pathologic and quality of life outcomes. Findings We describe a novel technique using careful blunt dissection to better delineate the apex of the prostate, providing a simple means to potentially lessen positive surgical margins at the apex and promote better continence and erectile function in men undergoing an anatomic radical prostatectomy. Median operative time and blood loss were 190 minutes and 675 mL, respectively. Only 10 percent of the patients with positive surgical margins were found to have apical positive surgical margins. Ninety-three percent of patients reported no urinary leakage. Conclusion We believe our technique of isolating the DVC with blunt dissection and then ligating and transecting the DVC to be feasible approach that requires larger studies to truly confirm its utility.

  9. Cancers of unknown primary origin (CUP) are characterized by chromosomal instability (CIN) compared to metastasis of know origin

    DEFF Research Database (Denmark)

    Vikeså, Jonas; Møller, Anne Kirstine H; Kaczkowski, Bogumil

    2015-01-01

    BACKGROUND: Cancers of unknown primary (CUPs) constitute ~5% of all cancers. The tumors have an aggressive biological and clinical behavior. The aim of the present study has been to uncover whether CUPs exhibit distinct molecular features compared to metastases of known origin. METHODS: Employing...... genome wide transcriptome analysis, Linear Discriminant Analysis (LDA) and Quadratic Discriminant Analysis (QDA), we defined the putative origins of a large series of CUP and how closely related a particular CUP was to corresponding metastases of known origin. LDA predictions were subsequently used...... to define a universal CUP core set of differentially expressed genes, that by means of gene set enrichment analysis was exploited to depict molecular pathways characterizing CUP. RESULTS: The analyses show that CUPs are distinct from metastases of known origin. CUPs exhibit inconsistent expression...

  10. Apical ballooning-like syndrome: Hypocalcemia? What else!

    OpenAIRE

    Maria Accadia; Marianna Abitabile; Salvatore Rumolo; Scotto di Uccio Fortunato; Luigi Irace; Andrea Tuccillo; Giuseppe Mercogliano; Bernardino Tuccillo

    2016-01-01

    Apical ballooning syndrome (ABS), also known as Takotsubo or stress cardiomyopathy, is characterised by acute, transient and severe LV dysfunction, mimicking myocardial infarction; it occurs, in most cases, in the absence of obstructive coronary disease and is precipitated by severe emotional or physical stress, but many other potential triggers has been identi ed in the last years. Although the pathogenesis of ABS remains unclear, the most common mechanisms suggested are coronary vasospam an...

  11. Rank-profile revealing Gaussian elimination and the CUP matrix decomposition

    CERN Document Server

    Jeannerod, Claude-Pierre; Storjohann, Arne

    2011-01-01

    Transforming a matrix over a field to echelon form, or decomposing the matrix as a product of structured matrices that reveal the rank profile, is a fundamental building block of computational exact linear algebra. This paper surveys the well known variations of such decompositions and transformations that have been proposed in the literature. We present an algorithm to compute the CUP decomposition of a matrix, adapted from the LSP algorithm of Ibarra, Moran and Hui (1982), and show reductions from the other most common Gaussian elimination based matrix transformations and decompositions to the CUP decomposition. We discuss the advantages of the CUP algorithm over other existing algorithms by studying time and space complexities: the asymptotic time complexity is rank sensitive, and comparing the constants of the leading terms, the algorithms for computing matrix invariants based on the CUP decomposition are always at least as good except in one case. We also show that the CUP algorithm, as well as the compu...

  12. A Study To Evaluate Skills Of Ophthalmic Assistants For Assessment Of Cup Disc Ratio

    Directory of Open Access Journals (Sweden)

    Malik J.S

    1999-01-01

    Full Text Available Research question: 1. Whether paramedical ophthalmic assistants can be trained to examine vertical cup disc ratio? 2. Can the PMO As detect abnormal cup disc ratio after training? Objectives: 1. T o train ophthalmic assistants in cup disc ratio examination 2. To evaluate skills of trained ophthalmic assistants in cup disc ratio examination Study design: Cross sectional Setting: OPD of Ophthalmology department, Pt. B.D. Sharma PGIMS, Rohtak Participants: Five paramedical ophthalmic assistants, one ophthalmologist and 322 patients above 40 years of age. Statistical analysis: Sensitivity, specificity, Kappa values. Results: Data analysis of 322 cases was found by PMO As and ophthalmologist revealed sensitivity between 50-65% and specificity between 84.5-92.62%. A good agreement was found among all the examiners on computation of Kappa Values. It was concluded that ophthalmic assistants can examine vertical cup disc ratio after five days training.

  13. [Clinical application of moving cupping therapy based on skin reaction observation and syndrome differentiation].

    Science.gov (United States)

    Deng, Xiao-Lan; Chen, Bo; Chen, Ze-Lin

    2014-12-01

    The diagnostic evidence on clinical diseases and theoretic basis of moving cupping therapy were ex- plored in the paper. By the observation of the local reaction, such as skin appearance and color, the affected location, duration of sickness and nature of disease were judged. Different moving cupping methods were selected for different disorders. It was discovered that the property of syndromes should be recognized by the palpation on skin and muscle in the moving cupping therapy so that the pathogenesis and treating principle could be carefully determined. The moving cupping therapy is the important component of body surface therapy. Skin reaction observation and syndrome differentiation is the essential guidance of the moving cupping therapy.

  14. Bigger size and defatting of bone chips will increase cup stability.

    Science.gov (United States)

    Ullmark, G

    2000-01-01

    Morcellised bone allograft in an in vitro model was used to test the tendency towards cup rotation using small or larger fragment sizes of an impacted graft bed and different fat contents. A cup cemented on an impacted graft bed of larger sized bone chips from the Howex bone mill containing natural marrow fat was loaded eccentrically until the cup rotated. This required 3450 N. The same chips impacted in the same way, but defatted with warm saline solution required 7000 N for rotation. The smaller sized bone chips from the Tracer bone mill defatted in a similar manner required only 1950 N for cup rotation. The conclusion was that larger sized chips, partly defatted, prevent rotation of a cup cemented on a graft bed.

  15. An Apical-Membrane Chloride Channel in Human Tracheal Epithelium

    Science.gov (United States)

    Welsh, Michael J.

    1986-06-01

    The mechanism of chloride transport by airway epithelia has been of substantial interest because airway and sweat gland-duct epithelia are chloride-impermeable in cystic fibrosis. The decreased chloride permeability prevents normal secretion by the airway epithelium, thereby interfering with mucociliary clearance and contributing to the morbidity and mortality of the disease. Because chloride secretion depends on and is regulated by chloride conductance in the apical cell membrane, the patch-clamp technique was used to directly examine single-channel currents in primary cultures of human tracheal epithelium. The cells contained an anion-selective channel that was not strongly voltage-gated or regulated by calcium in cell-free patches. The channel was also blocked by analogs of carboxylic acid that decrease apical chloride conductance in intact epithelia. When attached to the cell, the channel was activated by isoproterenol, although the channel was also observed to open spontaneously. However, in some cases, the channel was only observed after the patch was excised from the cell. These results suggest that this channel is responsible for the apical chloride conductance in airway epithelia.

  16. Apical Periodontitis - Is It Accountable for Cardiovascular Diseases?

    Science.gov (United States)

    Garg, Paridhi; Chaman, Chandrakar

    2016-08-01

    The aim of this review was to assess the relationship between apical periodontitis and cardiovascular diseases and the predictive factors regarding this association. Cross sectional and observational studies have been included, which are mostly retrospective. A comprehensive search was performed in the Systematic Electronic Databases, PUBMED and MEDLINE from 1919 till September 2014. Articles were also hand searched. From 86 studies identified, all were read and 58 articles which were relevant were included in the text. Some articles were excluded because they were pertaining to periodontology and other systemic disorders. Some were solely animal studies and were thus excluded. Our results suggest an independent association between cardiovascular diseases and apical periodontitis. A causal relationship could not be established since weak parameters of risk have been assessed in the studies, population taken is difficult to compare and other confounding factors have not been ruled out. Only a more focused and better instituted scientific research can determine this association. Establishing a cause and effect relationship between apical periodontitis and cardiovascular diseases can affect the course of treatment of cardiovascular diseases. It is not only of interest from the scientific point of view but also from public health perspective.

  17. The Effect of Canal Contamination with Saliva on Apical Sealing

    Directory of Open Access Journals (Sweden)

    S Sabaghi

    2014-08-01

    Full Text Available Introduction: Root canal obturation aims at sealing the root canal system to prevent re-contamination of canal and periapical space. Presence of moisture in canal before obturation may posit a negative effect on the quality of canal sealing. Therefore, this study was conducted to investigate the effect of canal contamination with saliva on apical microleakage. Methods: In this laboratory study, 58 human uni-root teeth were cleaned and shaped for obturation with gutta percha and sealer AH26. In the case group, specimens were contaminated with human saliva immediately before obturation, whereas the teeth in the control group were kept dry. All canals were filled by lateral condensation technique. Moreover, the teeth were placed in methylene blue dye for 3 days. Dye penetration was measured using a stereomicrosope. As a matter of fact, the study data were analyzed via utilizing t-test. Results: A significant difference was found between the two groups in regard with the apical leakage(P<0.001. The microleakage mean of dye in the dry group was 3/48mm, whereas it was 6/36mm in the saliva contaminated group. Conclusion: The study findings revealed that complete drying of canal can improve apical sealing.

  18. Anaemia and skin pigmentation after excessive cupping therapy by an unqualified therapist in Korea: a case report.

    Science.gov (United States)

    Kim, Kun Hyung; Kim, Tae-Hun; Hwangbo, Min; Yang, Gi Young

    2012-09-01

    A case is reported of skin pigmentation and associated anemia resulting from persistently repeated cupping therapies performed by an unqualified practitioner in South Korea. Almost 30 sessions of excessive cupping therapies with blood loss over two months yielded little benefit but led the patient to admit a hospital and receive blood transfusion for acquired iron deficiency anemia. Skin pigmentation on the cupping-attached region remained without any subjective discomfort. We suggest the importance of qualified health professionals when receiving cupping treatments.

  19. Germline genetics of cancer of unknown primary (CUP) and its specific subtypes.

    Science.gov (United States)

    Hemminki, Kari; Chen, Bowang; Kumar, Abhishek; Melander, Olle; Manjer, Jonas; Hallmans, Göran; Pettersson-Kymmer, Ulrika; Ohlsson, Claes; Folprecht, Gunnar; Löffler, Harald; Krämer, Alwin; Försti, Asta

    2016-04-19

    Cancer of unknown primary site (CUP) is a fatal cancer diagnosed through metastases at various organs. Little is known about germline genetics of CUP which appears worth of a search in view of reported familial associations in CUP. In the present study, samples from CUP patients were identified from 2 Swedish biobanks and a German clinical trial, totaling 578 CUP patients and 7628 regionally matched controls. Diagnostic data specified the organ where metastases were diagnosed. We carried out a genome-wide association study on CUP cases and controls. In the whole sample set, 6 loci reached an allelic p-value in the range of 10-7 and were supported by data from the three centers. Three associations were located next to non-coding RNA genes. rs2660852 flanked 5'UTR of LTA4H (leukotriene A4 hydrolase), rs477145 was intronic to TIAM1 (T-cell lymphoma invasion and metastases) and rs2835931 was intronic to KCNJ6 (potassium channel, inwardly rectifying subfamily J, member 6). In analysis of subgroups of CUP patients (smokers, non-smokers and CUP with liver metastases) genome-wide significant associations were noted. For patients with liver metastases associations on chromosome 6 and 11, the latter including a cluster of genes DHCR7 and NADSYN1, encoding key enzymes in cholesterol and NAD synthesis, and KRTAP5-7, encoding a keratin associated protein. This first GWAS on CUP provide preliminary evidence that germline genes relating to inflammation (LTA4H), metastatic promotion (TIAM1) in association with lipid metabolic disturbance (chromosome 11 cluster) may contribute to the risk of CUP.

  20. Cup versus bottle feeding for hospitalized late preterm infants in Egypt: A quasi-experimental study

    Directory of Open Access Journals (Sweden)

    Dabash Soheir A

    2008-11-01

    Full Text Available Abstract Background Although previous studies have demonstrated beneficial breastfeeding outcomes when cup feeding rather than bottle feeding was used for feeding preterm infants, cup feeding has not been implemented in Egypt. The aim of the current study was to examine the effect of using cup feeding as an exclusive method of feeding preterm infants during hospitalization on breastfeeding outcomes after discharge. Methods A quasi-experimental design, with the control group studied first, was used to examine the effect of cup feeding for preterm infants on breastfeeding outcomes after discharge. Sixty preterm infants (mean gestational age was 35.13 weeks and mean birth weight was 2150 grams were recruited during Neonatal Intensive Care Unit (NICU stay. Control group infants (n = 30 received only bottle feedings during hospitalization and the experimental group (n = 30 received only cup feedings during hospitalization. Both groups were followed up after discharge for six weeks to evaluate infant's breastfeeding behavior and mother's breastfeeding practices. Data were analyzed using descriptive statistics and repeated measures ANOVA for testing the differences between the cup feeding and bottle feeding groups over six weeks after discharge. Results Cup fed infants demonstrated significantly more mature breastfeeding behaviors when compared to bottle fed infants (p Conclusion Cup fed infants were more exclusively breast fed one week after discharge, supporting the Baby Friendly Hospital Initiative recommendations for using cup feeding and avoiding bottle feeding when providing supplementation for preterm infants. The current study provides initial evidence for the implementation of cup feeding as a method of supplementation for late preterm infants during hospitalization. Trial Registration Clinical Trial NCT00756587.

  1. Radiotherapeutic concepts in cancer of unknown primary site; Strahlentherapeutische Konzepte beim CUP-Syndrom

    Energy Technology Data Exchange (ETDEWEB)

    Krug, D.; Debus, J.; Sterzing, F. [Universitaetsklinikum Heidelberg, Klinik fuer Radioonkologie und Strahlentherapie, Heidelberg (Germany)

    2014-02-15

    The term cancer of unknown primary (CUP) encompasses a group of entities which differ to a great extent regarding etiology, prognosis and therapeutic management. The aim of the study was an elaboration of the role of radiotherapy in CUP syndrome. Systematic literature search and specification of the available treatment options. Radiotherapy is an integral part of interdisciplinary management approaches for patients with CUP in both curative and palliative situations. Radio-oncological techniques, such as intensity-modulated radiotherapy and stereotactic body radiotherapy increase the therapeutic window. Modern diagnostic modalities from radiology and nuclear medicine are the cornerstone of radiotherapeutic interventions, especially in terms of target volume definition and pretherapeutic staging. In the interdisciplinary setting radiation oncology offers the possibility of curative and often organ preserving approaches in patients with axillary and cervical CUP. In addition, improvement and preservation of quality of life can be achieved in patients with metastatic disease. Radiation oncology is a crucial component of the interdisciplinary management of patients with CUP. Therapeutic decisions in patients with CUP should be made in an interdisciplinary setting. (orig.) [German] Das Cancer-of-unknown-primary(CUP)-Syndrom fasst eine Gruppe von Erkrankungen zusammen, die durch eine ausgepraegte Heterogenitaet hinsichtlich Aetiologie, Therapie und Prognose gepraegt sind. Darstellung der Rolle der Strahlentherapie beim CUP-Syndrom. Systematische Literaturrecherche und Erlaeuterung der Behandlungsoptionen. Die Strahlentherapie ist beim CUP-Syndrom sowohl in adjuvanten und definitiven Therapiekonzepten wie auch in palliativer Intention etabliert. Technisch innovative Verfahren wie die intensitaetsmodulierte Radiotherapie und die stereotaktische Bestrahlung im Koerperstammbereich ermoeglichen eine Vergroesserung der therapeutischen Breite. Eine leistungsfaehige und moderne

  2. Cancers of unknown primary origin (CUP) are characterized by chromosomal instability (CIN) compared to metastasis of know origin.

    Science.gov (United States)

    Vikeså, Jonas; Møller, Anne Kirstine H; Kaczkowski, Bogumil; Borup, Rehannah; Winther, Ole; Henao, Ricardo; Krogh, Anders; Perell, Katharina; Jensen, Flemming; Daugaard, Gedske; Nielsen, Finn C

    2015-03-19

    Cancers of unknown primary (CUPs) constitute ~5% of all cancers. The tumors have an aggressive biological and clinical behavior. The aim of the present study has been to uncover whether CUPs exhibit distinct molecular features compared to metastases of known origin. Employing genome wide transcriptome analysis, Linear Discriminant Analysis (LDA) and Quadratic Discriminant Analysis (QDA), we defined the putative origins of a large series of CUP and how closely related a particular CUP was to corresponding metastases of known origin. LDA predictions were subsequently used to define a universal CUP core set of differentially expressed genes, that by means of gene set enrichment analysis was exploited to depict molecular pathways characterizing CUP. The analyses show that CUPs are distinct from metastases of known origin. CUPs exhibit inconsistent expression of conventional cancer biomarkers and QDA derived outlier scores show that CUPs are more distantly related to their primary tumor class than corresponding metastases of known origin. Gene set enrichment analysis showed that CUPs display increased expression of genes involved in DNA damage repair and mRNA signatures of chromosome instability (CIN), indicating that CUPs are chromosome unstable compared to metastases of known origin. CIN may account for the uncommon clinical presentation, chemoresistance and poor outcome in patients with CUP and warrant selective diagnostic strategies and treatment.

  3. Mortar modified with sulfonated polystyrene produced from waste plastic cups

    Directory of Open Access Journals (Sweden)

    L. A. C. MOTTA

    Full Text Available Abstract In this work, we studied the addition of sulfonated polystyrene produced from waste plastic cups as an admixture for mortars. Mortars were analyzed with polystyrene content of 0.0; 0.2; 0.6; 1.0 and 1.4% in relation to the cement mass. The influence of polystyrene on the mortars' properties was evaluated by the consistency index, water retention, water absorption, porosity, elasticity modulus, compressive strength, flexural strength, bond tensile strength and microscopy. The increase in the sulfonated polystyrene content decreased the elasticity modulus of the mortar and, despite higher porosity, there was a reduction of water absorption by capillarity. In relation to mortar without admixture, the modified mortar showed an increase in water retention and consistency index, and a large increase in flexural strength and bond tensile strength. The significant increase of bond tensile strength (214% with admixture 1% highlights the potential of the produced material as an adhesive mortar.

  4. Communities of constructional lips and cup reef rims in Bermuda

    Science.gov (United States)

    Thomas, Martin L. H.; Stevens, Jo-Anne

    1991-01-01

    Constructional lips and cup reef rims are little studied reef features typical of very turbulent conditions. The relatively low diversity community of these structures consists of three components, and algal mat dominated by Herposiphonia secunda, an encrusting calcareous biota characterised by crustose coralline algae and the vermetid gastropod Dendropoma corrodens, which together are the main hermatypic components, and an endolithic component with very abundant boring sponges, polychaetes, crustaceans and sipunculids. In northerly areas of Bermuda, the hydrozoan Millepora alcicornis is a prominent member of the community while to the south the urchin Echinometra lucunter is abundant. On the south side of Bermuda the community traps sediment which is deposited in the void spaces. The environment shows reduced grazing and this may account for the presence of several relict and rare species.

  5. Cutaneous Mycobacterium massiliense infection associated with cupping therapy.

    Science.gov (United States)

    Lee, S Y; Sin, J I; Yoo, H K; Kim, T S; Sung, K Y

    2014-12-01

    Nontuberculous mycobacteria (NTM) are ubiquitous organisms that are now seen as emerging human pathogens. NTM infections are very difficult to diagnose and treat, therefore a high index of clinical suspicion is needed for diagnosis. Cutaneous NTM infections have been primarily reported associated with previous invasive procedures. We report the case of a healthy 59-year-old woman who developed recurring abdominal skin lesions caused by Mycobacterium massiliense after she underwent noninvasive cupping therapy. We identified the pathogen using a PCR assay targeting the erm(41) gene of the bacterium. The patient was treated successfully by en bloc excision and long-term antibiotic treatment. This case shows that cutaneous infection with M. massiliense may occur in an immunocompetent person without an antecedent invasive procedure.

  6. Performance enhancement study of an electrostatic Faraday cup detector

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, J.D. [Department of Physics and Astronomy, University of Toledo, Toledo, OH 43606-3390 (United States); Hodges, G.S. [Department of Physics and Astronomy, University of Toledo, Toledo, OH 43606-3390 (United States); Seely, D.G. [Department of Physics, Albion College, Albion, MI 49224 (United States); Moroz, N.A. [Department of Physics, Albion College, Albion, MI 49224 (United States); Kvale, T.J. [Department of Physics and Astronomy, University of Toledo, Toledo, OH 43606-3390 (United States)]. E-mail: tkvale@physics.utoledo.edu

    2005-01-01

    Faraday cups (FCs) have long been used to measure charged particle beam currents in experiments that seek to determine cross-sections in energetic particle collisions. The reliable operation of a FC as a detector depends on the ability of the device to recapture the electrons ejected when energetic particles strike its interior metal surfaces. We have conducted comparative performance studies of a traditional cylindrically-symmetric, electrostatic-based FC versus an alternative design in which the cylindrical symmetry is broken. The purpose of the alternative design is to generate a transverse electric field to recapture the ejected (secondary and tertiary) electrons. The alternate FC design is shown to be superior in its ability to recapture these electrons, including those having kinetic energies greater than the potential energy barrier determined by the repeller voltage applied to the FC.

  7. Media value of the Basketball World Cup 2006

    Directory of Open Access Journals (Sweden)

    Pedro Garcia-del-Barrio

    2007-10-01

    Full Text Available The number of businesses whose activities are based on immaterial assets is growing very rapidly, which demands new ways of evaluating the economic relevance of intangible assets. The aim of this study is precisely to examine the Basketball World Cup 2006 -a particular experience within the industry of spectacle - through applying a novel methodology. The analysis of this sport event is an interesting exercise in itself, since it allows achieving important lessons and conclusions. Yet, the scope of this paper is broader, including another major goal. Effectively, the present study illustrates the potential capacity that ESIrg methodology has for evaluating intangible assets of different types and character (that must not necessary be linked to the sport industry.

  8. The Sphere Anemometer - A Fast Alternative to Cup Anemometry

    Science.gov (United States)

    Heißelmann, Hendrik; Hölling, Michael; Peinke, Joachim

    The main problem of cup anemometry is the different response time for increasing and decreasing wind velocities due to its moment of inertia. This results in an overestimation of wind speed under turbulent wind conditions, the so-called over-speeding. Additionally, routine calibrations are necessary due to the wear of bearings. Motivated by these problems the sphere anemometer, a new simple and robust sensor for wind velocity measurements without moving parts, was developed at the University of Oldenburg. In contrast to other known thrust-based sensors, the sphere anemometer uses the light pointer principle to detect the deflection of a bending tube caused by the drag force acting on a sphere mounted at its top. This technique allows the simultaneous determination of wind speed and direction via a two-dimensional position sensitive detector.

  9. Cup waveguide antenna with integrated polarizer and OMT

    Science.gov (United States)

    Acosta, Roberto J. (Inventor); Kory, Carol (Inventor); Lambert, Kevin M. (Inventor)

    2011-01-01

    A cup waveguide antenna with integrated polarizer and OMT for simultaneously communicating left and right hand circularly polarized electromagnetic waves is adjustable to obtain efficient propagation and reception of electromagnetic waves. The antenna includes a circular waveguide having an orthomode transducer utilizing first and second pins longitudinally spaced apart and oriented orthogonally with respect to each other. Six radially-oriented adjustable polarizer screws extend from the exterior to the interior of the waveguide. A septum intermediate the first and second pins is aligned with the first pin. Adjustment of the polarizer screws enables maximized propagation of and/or response to left hand circularly polarized electromagnetic waves by the first pin while simultaneously enabling maximized propagation of and/or response to right hand circularly polarized electromagnetic waves by the second pin.

  10. VOCALS-CUpEx: the Chilean Upwelling Experiment

    Science.gov (United States)

    Garreaud, R. D.; Rutllant, J. A.; Muñoz, R. C.; Rahn, D. A.; Ramos, M.; Figueroa, D.

    2011-03-01

    The VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) was a major field experiment conducted in spring of 2008 off southern Peru and northern Chile, aimed at better understanding the coupled climate systems of the southeast Pacific. Because of logistical constrains, the coastal area around 30° S was not sampled during VOCALS-REx. This area not only marks the poleward edge of the subtropical stratocumulus cloud regime (thus acting as a source of transient disturbances) but is also one of the most active upwelling centers and source of surface ocean kinetic energy along the Chilean coast. To fill such an observational gap, a small, brief, but highly focused field experiment was conducted in late spring 2009 in the near-shore region around 30° S. The Chilean Upwelling Experiment (CUpEx) was endorsed by VOCALS as a regional component. CUpEx included long-term monitoring, an intensive two-week field campaign and off-shore research flights. Our goal was to obtain an atmospheric/oceanic dataset with enough temporal and spatial coverage to be able to document (a) the mean diurnal cycles of the lower-troposphere and upper-ocean in a region of complex topography and coastline geometry, and (b) the ocean-atmosphere response to the rapid changes in coastal winds from strong, upwelling-favorable equatorward flow (southerly winds) to downwelling-favorable poleward flow (northerly winds). In this paper we describe the measurement platforms and sampling strategy, and provide an observational overview, highlighting some key mean-state and transient features.

  11. Occurrence of the Transition of Apical Architecture and Expression Patterns of Related Genes during Conversion of Apical Meristem Identity in G2 Pea

    Institute of Scientific and Technical Information of China (English)

    Da-Yong Wang; Qing Li; Ke-Ming Cui; Yu-Xian Zhu

    2009-01-01

    G2 pea exhibits an apical senescence delaying phenotype under short-day (SD) conditions; however, the structural basis for its apical development is still largely unknown. In the present study, the apical meristem of SD-grown G2 pea plants underwent a transition from vegetative to indeterminate inflorescence meristem, but the apical meristem of long-day (LD)-grown G2 pea plants would be further converted to determinate floral meristem. Both SD signal and GA3 treatment enhanced expression of the putative calcium transporter PPF1, and pea homologs of TFL1 (LF and DET), whereas LD signal suppressed their expression at 60 d post-flowering compared with those at 40 d post-flowering. Both PPF1 and LF expressed at the vegetative and reproductive phases in SD-grown apical buds, but floral initiation obviously increased the expression level of PPF1 compared with the unchanged expression level of LF from 40 to 60 d post-flowering. In addition, although the floral initiation significantly enhanced the expression levels of PPF1 and DET, DET was mainly expressed after floral initiation in SD-grown apical buds. Therefore, the main structural difference between LD- and SD-grown apical meristem in G2 pea lies in whether their apical indeterminate inflorescence medstem could be converted to the determinate structure.

  12. Sabot assembly

    Energy Technology Data Exchange (ETDEWEB)

    Bzorgi, Fariborz

    2016-11-08

    A sabot assembly includes a projectile and a housing dimensioned and configured for receiving the projectile. An air pressure cavity having a cavity diameter is disposed between a front end and a rear end of the housing. Air intake nozzles are in fluid communication with the air pressure cavity and each has a nozzle diameter less than the cavity diameter. In operation, air flows through the plurality of air intake nozzles and into the air pressure cavity upon firing of the projectile from a gun barrel to pressurize the air pressure cavity for assisting in separation of the housing from the projectile upon the sabot assembly exiting the gun barrel.

  13. A Facile Approach to Evaluate Thermal Insulation Performance of Paper Cups

    Directory of Open Access Journals (Sweden)

    Yudi Kuang

    2015-01-01

    Full Text Available Paper cups are ubiquitous in daily life for serving water, soup, coffee, tea, and milk due to their convenience, biodegradability, recyclability, and sustainability. The thermal insulation performance of paper cups is of significance because they are used to supply hot food or drinks. Using an effective thermal conductivity to accurately evaluate the thermal insulation performance of paper cups is complex due to the inclusion of complicated components and a multilayer structure. Moreover, an effective thermal conductivity is unsuitable for evaluating thermal insulation performance of paper cups in the case of fluctuating temperature. In this work, we propose a facile approach to precisely analyze the thermal insulation performance of paper cups in a particular range of temperature by using an evaluation model based on the MISO (Multiple-Input Single-Output technical theory, which includes a characterization parameter (temperature factor and a measurement apparatus. A series of experiments was conducted according to this evaluation model, and the results show that this evaluation model enables accurate characterization of the thermal insulation performance of paper cups and provides an efficient theoretical basis for selecting paper materials for paper cups.

  14. Effects of Aluminum Addition on Tensile and Cup Forming Properties of Three Twinning Induced Plasticity Steels

    Science.gov (United States)

    Hong, Seokmin; Shin, Sang Yong; Kim, Hyoung Seop; Lee, Sunghak; Kim, Sung-Kyu; Chin, Kwang-Geun; Kim, Nack J.

    2012-06-01

    In the present study, a high Mn twinning induced plasticity (TWIP) steel and two Al-added TWIP steels were fabricated, and their microstructures, tensile properties, and cup formability were analyzed to investigate the effects of Al addition on deformation mechanisms in tensile and cup forming tests. In the high Mn steel, the twin formation was activated to increase the strain hardening rate and ultimate tensile strength, which needed the high punch load during the cup forming test. In the Al-added TWIP steels, the twin formation was reduced, while the slip activation increased, thereby leading to the decrease in strain hardening rate and ultimate tensile strength. As twins and slips were homogeneously formed during the tensile or cup forming test, the punch load required for the cup forming and residual stresses were relatively low, and the tensile ductility was sufficiently high even after the cup forming test. This indicated that making use of twins and slips simultaneously in TWIP steels by the Al addition was an effective way to improve overall properties including cup formability.

  15. [Acetabular Osteolysis in Total Hip Replacement - When to Retain the Cup?].

    Science.gov (United States)

    Lutz, B; Faschingbauer, M; Bieger, R; Reichel, H; Kappe, T

    2016-08-01

    Periacetabular osteolysis is a frequent long-term complication of cementless total hip arthroplasty. The decision whether to retain or to revise a cup in the presence of osteolysis remains a challenge. The options are regular clinical and radiological check-ups, isolated liner exchange with and without bone grafting, and complete cup revision. Thorough preoperative diagnostics, including a medical history, examination and imaging, are mandatory for correct decision making. In most patients, computed tomography is useful to assess periacetabular osteolysis. If the cup is well-fixed and positioned in an asymptomatic patient without progressive osteolysis and no implant defect or higher grade polyethylene wear and no signs of infection, continuous clinical and radiological monitoring is preferred. If imaging reveals cup loosening, malposition, osteolysis localised in a weight-bearing area, imminent or present periprosthetic fractures, rapid progressive osteolysis, implant defects or massive inlay wear, surgical treatment may be preferred. Cup revision is usually performed in such patients. If the cup is well-positioned and well-fixed in the X-ray, the procedure has to be discussed with the patient individually. Apart from patient-specific risk factors, the risk of further progression has to be assessed. Isolated liner exchange can be performed if the patient is asymptomatic and the cup proves to be stable intraoperatively. It is still unclear whether filling osteolyses through screw holes or osseous windows is of long-term benefit. Georg Thieme Verlag KG Stuttgart · New York.

  16. Comparative evaluation of the apical sealing ability of a ceramic based sealer and MTA as root-end filling materials - An in-vitro study.

    Science.gov (United States)

    Gandhi, Bhavana; Halebathi-Gowdra, Ramesh

    2017-07-01

    The present study was aimed to evaluate and compare the apical sealing ability of two endodontic root-end filling materials namely, iRoot SP (ceramic based) and ProRoot MTA using the bacterial leakage system. A total of fifty recently extracted, single rooted teeth with a single straight canal were selected for the study. The teeth were chemo mechanically prepared. The apical 3mm of the root was resected and root end cavities were prepared. The teeth were randomly divided into two groups of twenty teeth each for the experimental root end filling materials namely, iRoot SP and ProRoot MTA. A two-chamber model was constructed using pippeter tips and plastic vials. The pipetter tips with the teeth were suspended in these caps and the entire assembly was reattached to the vial. The upper chamber was seeded withEnterococcus faecalis. An Enterococci-selective broth was used in the lower chamber. Leakage was assessed for 90 days and compared using survival statistics. The ProRoot MTA filled root end samples leaked within 30-72 days. The iRoot SP filled root end samples leaked within 51-69 days. Under the parameters of this study, it can be concluded that all the tested materials showed significant apical sealing ability as root-end filling materials over a period of 90 days. iRoot SP exhibited the most effective apical sealing ability as compared to ProRoot MTA. Key words:Apical sealing ability, Bacterial leakage, iRoot SP, ProRoot MTA, Root-end filling.

  17. Prediction of specialty coffee cup quality based on near infrared spectra of green coffee beans.

    Science.gov (United States)

    Tolessa, Kassaye; Rademaker, Michael; De Baets, Bernard; Boeckx, Pascal

    2016-04-01

    The growing global demand for specialty coffee increases the need for improved coffee quality assessment methods. Green bean coffee quality analysis is usually carried out by physical (e.g. black beans, immature beans) and cup quality (e.g. acidity, flavour) evaluation. However, these evaluation methods are subjective, costly, time consuming, require sample preparation and may end up in poor grading systems. This calls for the development of a rapid, low-cost, reliable and reproducible analytical method to evaluate coffee quality attributes and eventually chemical compounds of interest (e.g. chlorogenic acid) in coffee beans. The aim of this study was to develop a model able to predict coffee cup quality based on NIR spectra of green coffee beans. NIR spectra of 86 samples of green Arabica beans of varying quality were analysed. Partial least squares (PLS) regression method was used to develop a model correlating spectral data to cupping score data (cup quality). The selected PLS model had a good predictive power for total specialty cup quality and its individual quality attributes (overall cup preference, acidity, body and aftertaste) showing a high correlation coefficient with r-values of 90, 90,78, 72 and 72, respectively, between measured and predicted cupping scores for 20 out of 86 samples. The corresponding root mean square error of prediction (RMSEP) was 1.04, 0.22, 0.27, 0.24 and 0.27 for total specialty cup quality, overall cup preference, acidity, body and aftertaste, respectively. The results obtained suggest that NIR spectra of green coffee beans are a promising tool for fast and accurate prediction of coffee quality and for classifying green coffee beans into different specialty grades. However, the model should be further tested for coffee samples from different regions in Ethiopia and test if one generic or region-specific model should be developed.

  18. ACCUWIND - Accurate wind speed measurements in wind energy - Summary report[Cup and sonic anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Friis Pedersen, T.; Dahlberg, J.Aa.; Cuerva, A.; Mouzakis, F.; Busche, P.; Eecen, P.; Sanz-Andres, A.; Franchini, S.; Markkilde Petersen, S.

    2006-07-15

    The cup anemometer is at present the standard instrument used for mean wind speed measurement in wind energy. It is being applied in high numbers around the world for wind energy assessments. It is also applied exclusively for accredited power performance measurements for certification and verification purposes, and for purposes of optimisation in research and development. The revised IEC standard on power performance measurements has now included requirements for classification of cup anemometers. The basis for setting up such requirements of cup anemometers is two EU projects SITEPARIDEN and CLASSCUP from which the proposed classification method for cup anemometers was developed for the IEC standard. While cup anemometers at present are the standard anemometer being used for average wind speed measurements, sonic anemometers have been developed significantly over the last years, and prices have come down. The application of sonic anemometers may increase in wind energy if they prove to have comparable or better operational characteristics compared to cup anemometers, and if similar requirements to sonic anemometers are established as for cup anemometers. Sonic anemometers have historically been used by meteorologists for turbulence measurements, but have also found a role on wind turbine nacelles for wind speed and yaw control purposes. The report on cup and sonic anemometry deals with establishment of robustness in assessment and classification by focus on methods and procedures for analysis of characteristics of cup and sonic anemometers. The methods and procedures provide a platform, hopefully for use in meeting the requirements of the IEC standard on power performance measurements, as well as for development of improved instruments. (au)

  19. SEM investigation of Er:YAG laser apical preparation

    Science.gov (United States)

    Bǎlǎbuc, Cosmin; Todea, Carmen; Locovei, Cosmin; RǎduÅ£ǎ, Aurel

    2016-03-01

    Endodontic surgery involves the incision and flap elevation, the access to the root tip, its resection, the cavity retrograde preparation and filling it with biocompatible material that provides a good seal of the apex[1]. Apicoectomy is compulsory in endodontic surgery. The final stage involves the root retropreparation and the carrying out of the retrograde obturation. In order to perform the retrograde preparation the endodontist can use various tools such as lowspeed conventional handpieces, sonic and ultrasonic equipment. The ideal depth of the preparation should be 3 mm, exceeding this value may affect the long-term success of the obturation [2]. Resection at the depth of 3 mm reduces apical ramifications by 98% and lateral root canals by 93%. The ultrasonic retropreparation has numerous advantages compared to the dental drill. Firstly, the cavity will be in the axis of the tooth which implies a minimum destruction of the root canal morphology. The preparations are precise, and the cutting pattern is perpendicular to the long axis of the root, the advantage being the reduction in the number of dentinal tubules exposed at the resected area [3]. Therefore, the retrograde filling is the procedure when an inert and non-toxic material is compacted in the apically created cavity.[4,5]. The Er:YAG laser is the most common wavelength indicated for dental hard tissue preparation. Its natural selectivity offers a significant advantage compared to the conventional hard tissue preparation [6-9].The purpose of this in vitro study was to investigate the quality of Er:YAG laser apical third preparation using Scanning Electron Microscopy (SEM), in comparison with the conventional ultrasonic method.

  20. Bacterial communities associated with apical periodontitis and dental implant failure

    Directory of Open Access Journals (Sweden)

    Simon Dingsdag

    2016-11-01

    Full Text Available Background: Previously, we demonstrated that bacteria reside in apparently healed alveolar bone, using culture and Sanger sequencing techniques. Bacteria in apparently healed alveolar bone may have a role in peri-implantitis and dental implant failure. Objective: To compare bacterial communities associated with apical periodontitis, those colonising a failed implant and alveolar bone with reference biofilm samples from healthy teeth. Methods and results: The study consisted of 196 samples collected from 40 patients undergoing routine dental implant insertion or rehabilitation. The bacterial 16S ribosomal DNA sequences were amplified. Samples yielding sufficient polymerase chain reaction product for further molecular analyses were subjected to terminal restriction fragment length polymorphism (T-RFLP; 31 samples and next generation DNA sequencing (454 GS FLX Titanium; 8 samples. T-RFLP analysis revealed that the bacterial communities in diseased tissues were more similar to each other (p<0.049 than those from the healthy reference samples. Next generation sequencing detected 13 bacterial phyla and 373 putative bacterial species, revealing an increased abundance of Gram-negative [Prevotella, Fusobacterium (p<0.004, Treponema, Veillonellaceae, TG5 (Synergistetes] bacteria and a decreased abundance of Gram-positive [(Actinomyces, Corynebacterium (p<0.008] bacteria in the diseased tissue samples (n=5 relative to reference supragingival healthy samples (n=3. Conclusion: Increased abundances of Prevotella, Fusobacterium and TG5 (Synergistetes were associated with apical periodontitis and a failed implant. A larger sample set is needed to confirm these trends and to better define the processes of bacterial pathogenesis in implant failure and apical periodontitis. The application of combined culture-based, microscopic and molecular technique-based approaches is suggested for future studies.

  1. Apical Na+ permeability of frog skin during serosal Cl- replacement.

    Science.gov (United States)

    Leibowich, S; DeLong, J; Civan, M M

    1988-05-01

    Gluconate substitution for serosal Cl- reduces the transepithelial short-circuit current (Isc) and depolarizes short-circuited frog skins. These effects could result either from inhibition of basolateral K+ conductance, or from two actions to inhibit both apical Na+ permeability (PapNa) and basolateral pump activity. We have addressed this question by studying whole-and split-thickness frog skins. Intracellular Na+ concentration (CcNa) and PapNa have been monitored by measuring the current-voltage relationship for apical Na+ entry. This analysis was conducted by applying trains of voltage pulses, with pulse durations of 16 to 32 msec. Estimates of PapNa and CcNa were not detectably dependent on pulse duration over the range 16 to 80 msec. Serosal Cl- replacement uniformly depolarized short-circuited tissues. The depolarization was associated with inhibition of Isc across each split skin, but only occasionally across the whole-thickness preparations. This difference may reflect the better ionic exchange between the bulk medium and the extracellular fluid in contact with the basolateral membranes, following removal of the underlying dermis in the split-skin preparations. PapNa was either unchanged or increased, and CcNa either unchanged or reduced after the anionic replacement. These data are incompatible with the concept that serosal Cl- replacement inhibits PapNa and Na,K-pump activity. Gluconate substitution likely reduces cell volume, triggering inhibition of the basolateral K+ channels, consistent with the data and conclusions of S.A. Lewis, A.G. Butt, M.J. Bowler, J.P. Leader and A.D.C. Macknight (J. Membrane Biol. 83:119-137, 1985) for toad bladder. The resulting depolarization reduces the electrical force favoring apical Na+ entry. The volume-conductance coupling serves to conserve volume by reducing K+ solute loss. Its molecular basis remains to be identified.

  2. Perceptual elements in Penn & Teller’s “Cups and Balls” magic trick

    Directory of Open Access Journals (Sweden)

    Hector Rieiro

    2013-02-01

    Full Text Available Magic illusions provide the perceptual and cognitive scientist with a toolbox of experimental manipulations and testable hypotheses about the building blocks of conscious experience. Here we studied several sleight-of-hand manipulations in the performance of the classic “Cups and Balls” magic trick (where balls appear and disappear inside upside-down opaque cups. We examined a version inspired by the entertainment duo Penn & Teller, conducted with three opaque and subsequently with three transparent cups. Magician Teller used his right hand to load (i.e. introduce surreptitiously a small ball inside each of two upside-down cups, one at a time, while using his left hand to remove a different ball from the upside-down bottom of the cup. The sleight at the third cup involved one of six manipulations: (a standard maneuver, (b standard maneuver without a third ball, (c ball placed on the table, (d ball lifted, (e ball dropped to the floor, and (f ball stuck to the cup. Seven subjects watched the videos of the performances while reporting, via button press, whenever balls were removed from the cups/table (button “1” or placed inside the cups/on the table (button “2”. Subjects’ perception was more accurate with transparent than with opaque cups. Perceptual performance was worse for the conditions where the ball was placed on the table, or stuck to the cup, than for the standard maneuver. The condition in which the ball was lifted displaced the subjects’ gaze position the most, whereas the condition in which there was no ball caused the smallest gaze displacement. Training improved the subjects’ perceptual performance. Occlusion of the magician’s face did not affect the subjects’ perception, suggesting that gaze misdirection does not play a strong role in the Cups and Balls illusion. Our results have implications for how to optimize the performance of this classic magic trick, and for the types of hand and object motion that

  3. The dislocating hip replacement - revision with a dual mobility cup in 56 consecutive patients

    DEFF Research Database (Denmark)

    Jakobsen, Thomas; Kappel, Andreas; Hansen, Flemming

    2014-01-01

    INTRODUCTION: Recurrent dislocations of hip replacements are a difficult challenge. One treatment option for recurrent dislocations is the use of a dual mobility cup. The aim of this study was to retrospective investigate the effect of dual mobility cups as a treatment for recurrent dislocations...... of the acetabular component, and one due to infection. Harris Hip Score improved from a mean of 76 before index surgery to 87 within one year after index surgery. CONCLUSION: This study advocates the use of a dual mobility cup for treatment of recurrent dislocations of THR. However, studies with a longer follow up...

  4. Numerical Model for the Lateral Compression Response of a Plastic Cup

    OpenAIRE

    Dapic, Ignacio

    2003-01-01

    A numerical analysis based on the finite element method is developed to simulate the mechanical response of a typical sixteen-ounce plastic drink cup subjected to a lateral compressive load. The aim of the analysis is to simulate a test in which the cup is supported horizontally in a fixture on a testing machine platen, and a loading nose attached to the actuator is displaced downward into the cup. The numerical model is developed using the software packages MSC.Patran, ABAQUS/CAE, and ABAQUS...

  5. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  6. Reparación apical y periapical post tratamiento endodontico.

    OpenAIRE

    Altare, Lia

    2010-01-01

    El propósito de este trabajo es describir el proceso reparativo apical y periapical post tratamiento endodóntico , los mecanismos y sistemas celulares involucrados ,dentro del campo de la Endodoncia Biomolecular.Una nueva era de conocimientos invaden a la Endodoncia Moderna dado por la Ingeniería Tisular Endodóntica desde donde se plantean alternativas terapéuticas .El análisis de la capacidad biológica reparativa de cada paciente demuestra una variabilidad en la respuesta frente a un tratami...

  7. Pulp revascularization of immature dog teeth with apical periodontitis.

    Science.gov (United States)

    Thibodeau, Blayne; Teixeira, Fabricio; Yamauchi, Mitsuo; Caplan, Daniel J; Trope, Martin

    2007-06-01

    This study examined the ability of a collagen solution to aid revascularization of necrotic-infected root canals in immature dog teeth. Sixty immature teeth from 6 dogs were infected, disinfected, and randomized into experimental groups: 1: no further treatment; 2: blood in canal; 3: collagen solution in canal, 4: collagen solution + blood, and 5: negative controls (left for natural development). Uncorrected chi-square analysis of radiographic results showed no statistical differences (p >or= 0.05) between experimental groups regarding healing of radiolucencies but a borderline statistical difference (p = 0.058) for group 1 versus group 4 for radicular thickening. Group 2 showed significantly more apical closure than group 1 (p = 0.03) and a borderline statistical difference (p = 0.051) for group 3 versus group 1. Uncorrected chi-square analysis revealed that there were no statistical differences between experimental groups for histological results. However, some roots in each of groups 1 to 4 (previously infected) showed positive histologic outcomes (thickened walls in 43.9%, apical closure in 54.9%, and new luminal tissue in 29.3%). Revascularization of disinfected immature dog root canal systems is possible.

  8. Ontogeny of the Maize Shoot Apical Meristem[W][OA

    Science.gov (United States)

    Takacs, Elizabeth M.; Li, Jie; Du, Chuanlong; Ponnala, Lalit; Janick-Buckner, Diane; Yu, Jianming; Muehlbauer, Gary J.; Schnable, Patrick S.; Timmermans, Marja C.P.; Sun, Qi; Nettleton, Dan; Scanlon, Michael J.

    2012-01-01

    The maize (Zea mays) shoot apical meristem (SAM) arises early in embryogenesis and functions during stem cell maintenance and organogenesis to generate all the aboveground organs of the plant. Despite its integral role in maize shoot development, little is known about the molecular mechanisms of SAM initiation. Laser microdissection of apical domains from developing maize embryos and seedlings was combined with RNA sequencing for transcriptomic analyses of SAM ontogeny. Molecular markers of key events during maize embryogenesis are described, and comprehensive transcriptional data from six stages in maize shoot development are generated. Transcriptomic profiling before and after SAM initiation indicates that organogenesis precedes stem cell maintenance in maize; analyses of the first three lateral organs elaborated from maize embryos provides insight into their homology and to the identity of the single maize cotyledon. Compared with the newly initiated SAM, the mature SAM is enriched for transcripts that function in transcriptional regulation, hormonal signaling, and transport. Comparisons of shoot meristems initiating juvenile leaves, adult leaves, and husk leaves illustrate differences in phase-specific (juvenile versus adult) and meristem-specific (SAM versus lateral meristem) transcript accumulation during maize shoot development. This study provides insight into the molecular genetics of SAM initiation and function in maize. PMID:22911570

  9. Demands of World Cup Competitions in Elite Women Road Cycling.

    Science.gov (United States)

    Menaspà, Paolo; Sias, Marco; Bates, Gene; La Torre, Antonio

    2017-03-02

    Describing the demand of recent World Cup (WC) races comparing Top 10 (T10) and non-Top 10 (N-T10) performances using power data. Race data were collected in 1-day World Cup races during the 2012-2015 road cycling seasons. Seven female cyclists completed 49 WC races, finishing 25 times in T10 and 24 times N-T10. Peak power (1 s) and Maximal Mean Power (MMP) for durations of 5, 10, 20 and 30 s and 1, 2, 5, 10, 20, 30 and 60 min expressed as power to weight ratio were analysed in T10 and N-T10. The percentage of total race time spent at different power bands was compared between T10 and N-T10 using 0.75 W˖kg(-1) power bands, ranging from 7.50 W˖kg(-1). The number of efforts in which the power output remained above 7.50 W˖kg(-1) for at least 10 seconds were recorded. MMP were significantly higher in T10 than in N-Top 10, with a large effect size for durations between 10 seconds and 5 minutes. N-T10 spent more time in the 3.01-3.75 W·kg(-1) power band when compared to T10 (P=0.011); conversely, T10 spent more time in the 6.75-7.50 and >7.50 W·kg(-1) power bands (P=0.009 and 0.005, respectively) than N-T10. A significantly higher number of short and high intensity efforts (≥10s, >7.5 W·kg(-1)) was ridden by T10, compared to N-T10 (P=0.002). Specifically, 46±20 and 30±15 efforts for T10 and N-T10, respectively. The ability to ride at high intensity was determinant for successful road cycling performances in WC races.

  10. Magi Is Associated with the Par Complex and Functions Antagonistically with Bazooka to Regulate the Apical Polarity Complex

    Science.gov (United States)

    Padash Barmchi, Mojgan; Samarasekera, Gayathri; Gilbert, Mary; Auld, Vanessa J.; Zhang, Bing

    2016-01-01

    The mammalian MAGI proteins play important roles in the maintenance of adherens and tight junctions. The MAGI family of proteins contains modular domains such as WW and PDZ domains necessary for scaffolding of membrane receptors and intracellular signaling components. Loss of MAGI leads to reduced junction stability while overexpression of MAGI can lead to increased adhesion and stabilization of epithelial morphology. However, how Magi regulates junction assembly in epithelia is largely unknown. We investigated the single Drosophila homologue of Magi to study the in vivo role of Magi in epithelial development. Magi is localized at the adherens junction and forms a complex with the polarity proteins, Par3/Bazooka and aPKC. We generated a Magi null mutant and found that Magi null mutants were viable with no detectable morphological defects even though the Magi protein is highly conserved with vertebrate Magi homologues. However, overexpression of Magi resulted in the displacement of Baz/Par3 and aPKC and lead to an increase in the level of PIP3. Interestingly, we found that Magi and Baz functioned in an antagonistic manner to regulate the localization of the apical polarity complex. Maintaining the balance between the level of Magi and Baz is an important determinant of the levels and localization of apical polarity complex. PMID:27074039

  11. Modulation of endocytic trafficking and apical stability of CFTR in primary human airway epithelial cultures

    Science.gov (United States)

    Cholon, Deborah M.; O'Neal, Wanda K.; Randell, Scott H.; Riordan, John R.

    2010-01-01

    CFTR is a highly regulated apical chloride channel of epithelial cells that is mutated in cystic fibrosis (CF). In this study, we characterized the apical stability and intracellular trafficking of wild-type and mutant CFTR in its native environment, i.e., highly differentiated primary human airway epithelial (HAE) cultures. We labeled the apical pool of CFTR and subsequently visualized the protein in intracellular compartments. CFTR moved from the apical surface to endosomes and then efficiently recycled back to the surface. CFTR endocytosis occurred more slowly in polarized than in nonpolarized HAE cells or in a polarized epithelial cell line. The most common mutation in CF, ΔF508 CFTR, was rescued from endoplasmic reticulum retention by low-temperature incubation but transited from the apical membrane to endocytic compartments more rapidly and recycled less efficiently than wild-type CFTR. Incubation with small-molecule correctors resulted in ΔF508 CFTR at the apical membrane but did not restore apical stability. To stabilize the mutant protein at the apical membrane, we found that the dynamin inhibitor Dynasore and the cholesterol-extracting agent cyclodextrin dramatically reduced internalization of ΔF508, whereas the proteasomal inhibitor MG-132 completely blocked endocytosis of ΔF508. On examination of intrinsic properties of CFTR that may affect its apical stability, we found that N-linked oligosaccharides were not necessary for transport to the apical membrane but were required for efficient apical recycling and, therefore, influenced the turnover of surface CFTR. Thus apical stability of CFTR in its native environment is affected by properties of the protein and modulation of endocytic trafficking. PMID:20008117

  12. Corking Nitrogen-Doped Carbon Nanotube Cups with Gold Nanoparticles for Biodegradable Drug Delivery Applications.

    Science.gov (United States)

    Burkert, Seth C; Star, Alexander

    2015-12-02

    Carbon nanomaterials have been proposed as effective drug delivery devices; however their perceived biopersistence and toxicological profile may hinder their applications in medical therapeutics. Nitrogen doping of carbon nanotubes results in a unique "stacked-cup" structure, with cups held together through van der Waals forces. Disrupting these weak interactions yields individual and short-stacked nanocups that can subsequently be corked with gold nanoparticles, resulting in sealed containers for delivery of cargo. Peroxidase-catalyzed reactions can effectively uncork these containers, followed by complete degradation of the graphitic capsule, resulting in effective release of therapeutic cargo while minimizing harmful side effects. The protocols reported herein describe the synthesis of stacked nitrogen-doped carbon nanotube cups followed by effective separation into individual cups and gold nanoparticle cork formation resulting in loaded and sealed containers.

  13. Design and Application on Auto-vending Machine for Cupped Beverage

    Directory of Open Access Journals (Sweden)

    Xiaowei Jiang

    2014-12-01

    Full Text Available The purpose of this study is to design an auto-vending machine for cupped beverage, specifically studying its shape design and color design. The article elaborates that the shape design of this auto-vending machine for cupped beverage should follow the art rule of variation and unity and meanwhile the whole shape still should be simple and direct; the color design of the auto-vending machine for cupped beverage not only should satisfy the request of man-machine coordination and environment and function, but also should value the choice of tone, match the new age request of appreciation beauty and notice novelty. And then the working principle and working process of the auto-vending machine for cupped beverage is introduced, based on which the conclusion has been reached.

  14. HIE-ISOLDE Faraday cups tested with ion beams at TRIUMF

    CERN Document Server

    Cantero, E D

    2014-01-01

    The future HIE-ISOLDE Faraday cups for both the intercryomodule regions and the HEBTs have been tested using 34S+7, 4He+, 23Na+6 and 20Ne+5 beams from the ISAC-II accelerator at TRIUMF. Their performance has been characterized together with the Faraday cups from REX-ISOLDE and those from ISAC-II. The measurements were done at E/A = 1.5, 2.85 and 5.5 MeV/u, with beam intensities in the range of 100 pA to 4 nA. The performance of these Faraday cups has been compared under the same beam conditions for different bias voltages up to -350 V. Within the experimental uncertainties, most of them coming from fluctuations in beam intensity, all devices showed similar results. Biasing the Faraday cup repeller ring to voltages of at least -60 V, the escape of secondary electrons was suppressed.

  15. Mechanistic Based DEM Simulation of Particle Attrition in a Jet Cup

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei; DeCroix, David; Sun, Xin

    2014-02-01

    The attrition of particles is a major industrial concern in many fluidization systems as it can have undesired effects on the product quality and on the reliable operation of process equipment. Therefore, to accomodate the screening and selection of catalysts for a specific process in fluidized beds, risers, or cyclone applications, their attrition propensity is usually estimated through jet cup attrition testing, where the test material is subjected to high gas velocities in a jet cup. However, this method is far from perfect despite its popularity, largely due to its inconsistency in different testing set-ups. In order to better understand the jet cup testing results as well as their sensitivity to different operating conditions, a coupled computational fluid dynamic (CFD) - discrete element method (DEM) model has been developed in the current study to investigate the particle attrition in a jet cup and its dependence on various factors, e.g. jet velocity, initial particle size, particle density, and apparatus geometry.

  16. Region-based multi-step optic disk and cup segmentation from color fundus image

    Science.gov (United States)

    Xiao, Di; Lock, Jane; Manresa, Javier Moreno; Vignarajan, Janardhan; Tay-Kearney, Mei-Ling; Kanagasingam, Yogesan

    2013-02-01

    Retinal optic cup-disk-ratio (CDR) is a one of important indicators of glaucomatous neuropathy. In this paper, we propose a novel multi-step 4-quadrant thresholding method for optic disk segmentation and a multi-step temporal-nasal segmenting method for optic cup segmentation based on blood vessel inpainted HSL lightness images and green images. The performance of the proposed methods was evaluated on a group of color fundus images and compared with the manual outlining results from two experts. Dice scores of detected disk and cup regions between the auto and manual results were computed and compared. Vertical CDRs were also compared among the three results. The preliminary experiment has demonstrated the robustness of the method for automatic optic disk and cup segmentation and its potential value for clinical application.

  17. Effect of bottles, cups, and dummies on breast feeding in preterm infants: a randomised controlled trial.

    Science.gov (United States)

    Collins, Carmel T; Ryan, Philip; Crowther, Caroline A; McPhee, Andrew J; Paterson, Susan; Hiller, Janet E

    2004-07-24

    To determine the effect of artificial teats (bottle and dummy) and cups on breast feeding in preterm infants. Randomised controlled trial. Two large tertiary hospitals, 54 peripheral hospitals. 319 preterm infants (born at 23-33 weeks' gestation) randomly assigned to one of four groups: cup/no dummy (n = 89), cup/dummy (n = 72), bottle/no dummy (n = 73), bottle/dummy (n = 85). Women with singleton or twin infants Dummies do not affect breast feeding in preterm infants. Cup feeding significantly increases the likelihood that the baby will be fully breast fed at discharge home, but has no effect on any breast feeding and increases the length of hospital stay.

  18. Cupping therapy: A prudent remedy for a plethora of medical ailments.

    Science.gov (United States)

    Mehta, Piyush; Dhapte, Vividha

    2015-07-01

    Since ancient times, complementary and alternative medicine (CAM; bǔ chōng yǔ tì dài yī xué) have played an important role in human health and welfare. Many therapeutic approaches in healthcare outside the realm of conventional medicine persist in various parts of the world. There is considerable scientific and commercial potential in CAM, which needs to be explored precisely. Cupping therapy ( bá guàn liáo fǎ), one of the CAM, is practiced across the world. This therapy is believed to act by correcting imbalances in the internal bio field, such as by restoring the flow of "Qi (qì)". Cupping involves applying a heated cup to generate a partial vacuum that mobilizes the blood flow and promotes effective healing. This review outlines various tools and techniques of cupping therapy.

  19. Treatment of 34 Cases of Acute Lumbar Sprain with Electroacupuncture plus Cupping Therapy

    Institute of Scientific and Technical Information of China (English)

    张力; 洪珏

    2009-01-01

    @@ Acute lumbar sprain due to improper exercise is very common in college students. The author has treated 34 patients with acute lumbar sprain by electroacupuncture plus cupping therapy, now it was presented as follows.

  20. Electromyographic analysis of masseter muscle in newborns during suction in breast, bottle or cup feeding

    National Research Council Canada - National Science Library

    França, Ellia C L; Sousa, Cejana B; Aragão, Lucas C; Costa, Luciane R

    2014-01-01

    .... The aim of this study was to analyze the electrical activity of the masseter muscle using surface electromyography during suction in term newborns by comparing breastfeeding, bottle and cup feeding...

  1. Clinical Observation of 82 Cases of Enuresis Treated by Ginger-partitioned Moxibustion plus Cupping Therapy

    Institute of Scientific and Technical Information of China (English)

    ZHU Wei-ping; HUANG Guo-qi

    2003-01-01

    Purpose: To observe the clinical therapeutic effect in the treatment of enuresis by ginger-partitioned moxibustion plus cupping therapy. Methods: Ginger-par -titioned moxibustion was applied on Guanyuan (CV 4)and bilateral Zusanli (ST 36) and cupping therapy was applied on Shenque (CV 8) in the treatment of 82 cases of enuresis, in comparison with 76 cases treated by Chinese herbal medicine. Results: The effective rate was 84.1% in the treatment by ginger-partitioned moxibustion plus cupping therapy and was 64.5% in the treatment by Chinese herbal medicine. Conclusion: Ginger-partitio -ned moxibustion plus cupping therapy was better than Chinese herbal medicine in the treatment of enuresis (P <0.05).

  2. Application of rare- earth and nano elements on diamond cup wheels

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Diamond cup wheel is used widely as an important tool for machining ceramic tile. In this paper,nano rare - earth oxide and nano carbide were added in the segments of seven kinds of diamond cup wheels.The performance of diamond cup wheels were tested on a special designed test machine by grinding two kinds of ceramic tiles. The surface morphology of the segments was examined by Scanning Election Microscopy (SEM) and the micro-hardness of segments was measured. The results showed that nano rare-earth oxide and nano carbide can fine segment micro structure, make grain boundary clear and increase grasping of diamond grits. They can increase also the wear resistance of diamond cup wheels as well as the grinding ratio.

  3. Forecasting a winner for Malaysian Cup 2013 using soccer simulation model

    Science.gov (United States)

    Yusof, Muhammad Mat; Fauzee, Mohd Soffian Omar; Latif, Rozita Abdul

    2014-07-01

    This paper investigates through soccer simulation the calculation of the probability for each team winning Malaysia Cup 2013. Our methodology used here is we predict the outcomes of individual matches and then we simulate the Malaysia Cup 2013 tournament 5000 times. As match outcomes are always a matter of uncertainty, statistical model, in particular a double Poisson model is used to predict the number of goals scored and conceded for each team. Maximum likelihood estimation is use to measure the attacking strength and defensive weakness for each team. Based on our simulation result, LionXII has a higher probability in becoming the winner, followed by Selangor, ATM, JDT and Kelantan. Meanwhile, T-Team, Negeri Sembilan and Felda United have lower probabilities to win Malaysia Cup 2013. In summary, we find that the probability for each team becominga winner is small, indicating that the level of competitive balance in Malaysia Cup 2013 is quite high.

  4. An overview of systematic reviews of clinical evidence for cupping therapy

    Directory of Open Access Journals (Sweden)

    Huijuan Cao

    2015-01-01

    Conclusions: Cupping therapy may be beneficial for pain-related conditions, acne, and facial paralysis. However, a firm conclusion could not be drawn due to the insufficient number of included reviews and the low quality of the original studies.

  5. Dump assembly

    Science.gov (United States)

    Goldmann, Louis H.

    1986-01-01

    A dump assembly having a fixed conduit and a rotatable conduit provided with overlapping plates, respectively, at their adjacent ends. The plates are formed with openings, respectively, normally offset from each other to block flow. The other end of the rotatable conduit is provided with means for securing the open end of a filled container thereto. Rotation of the rotatable conduit raises and inverts the container to empty the contents while concurrently aligning the conduit openings to permit flow of material therethrough.

  6. Effect of Cup Length on Film Profiles in Gas-Centered Swirl-Coaxial Injectors

    Science.gov (United States)

    2009-12-01

    cup. If the liquid film is not completely broken up within the cup then a secondary, hollow , outer cone will form. This cone contains many droplets...is difficult to measure and costly three-dimensional CFD simulations would be needed to accurately model it. Its effect on atomization/design...This difficulty was recognized early in the US development of GCSC injectors and models specific to GCSC injectors were sought. 2 Further

  7. Effects of wet-cupping on blood pressure in hypertensive patients:a randomized controlled trial

    Institute of Scientific and Technical Information of China (English)

    Nouran A Aleyeidi; Khaled S Aseri; Shadia M Matbouli; Albaraa A Sulaiamani; Sumayyah A Kobeisy

    2015-01-01

    BACKGROUND: Although cupping remains a popular treatment modality worldwide, its efficacy for most diseases, including hypertension, has not been scientifical y evaluated. OBJECTIVE: We aimed to determine the efficacy of wet-cupping for high blood pressure, and the incidence of the procedure’s side effects in the intervention group. DESIGN, SETTING, PARTICIPANTS AND INTERVENTIONS: This is a randomized control ed trial conducted in the General Practice Department at King Abdulaziz University Hospital, Jeddah, Saudi Arabia, between May 2013 and February 2014. There were two groups (40 participants each):intervention group undergoing wet-cupping (hijama) in addition to conventional hypertension treatment, and a control group undergoing only conventional hypertension treatment. Three wet-cupping sessions were performed every other day. MAIN OUTCOME MEASURE: The mean systolic and diastolic blood pressures were measured using a validated automatic sphygmomanometer. The fol ow-up period was 8 weeks. RESULTS: Wet-cupping provided an immediate reduction of systolic blood pressure. After 4 weeks of fol ow-up, the mean systolic blood pressure in the intervention group was 8.4 mmHg less than in the control group (P = 0.046). After 8 weeks, there were no significant differences in blood pressures between the intervention and control groups. In this study, wet-cupping did not result in any serious side effects. CONCLUSION: Wet-cupping therapy is effective for reducing systolic blood pressure in hypertensive patients for up to 4 weeks, without serious side effects. Wet-cupping should be considered as a complementary hypertension treatment, and further studies are needed. TRIAL REGISTRATION: ClinicalTrials.gov Identifier NCT01987583.

  8. Faraday Cup - it is used to measure beam intensities at low energy beams.

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    A Faraday Cup is used to measure beam intensities at low energy beams. An electrically isolated metallic electrode intercepts the beam and captures all its charges. These charges are integrated using an current sensitive amplifier. When the beam impinges onto the electrode surface low energy electrons are liberated. In order to prevent these electrons from escaping the cup and thus falsifying the measurement, a repeller electrode with negative potential pushes the electrons back onto the electrode.

  9. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

  10. Definitions of apical vaginal support loss: a systematic review.

    Science.gov (United States)

    Meister, Melanie R L; Sutcliffe, Siobhan; Lowder, Jerry L

    2017-03-01

    We sought to identify and summarize definitions of apical support loss utilized for inclusion, success, and failure in surgical trials for treatment of apical vaginal prolapse. Pelvic organ prolapse is a common condition affecting more than 3 million women in the US, and the prevalence is increasing. Prolapse may occur in the anterior compartment, posterior compartment or at the apex. Apical support is considered paramount to overall female pelvic organ support, yet apical support loss is often underrecognized and there are no guidelines for when an apical support procedure should be performed or incorporated into a procedure designed to address prolapse. A systematic literature search was performed in 8 search engines: PubMed 1946-, Embase 1947-, Cochrane Database of Systematic Reviews, Cochrane Database of Abstracts of Review Effects, Cochrane Central Register of Controlled Trials, ClinicalTrials.gov, Proquest Dissertations and Theses, and FirstSearch Proceedings, using key words for apical pelvic organ prolapse and apical suspension procedures through April 2016. Searches were limited to human beings using human filters and articles published in English. Study authors (M.R.L.M., J.L.L.) independently reviewed publications for inclusion based on predefined variables. Articles were eligible for inclusion if they satisfied any of the following criteria: (1) apical support loss was an inclusion criterion in the original study, (2) apical support loss was a surgical indication, or (3) an apical support procedure was performed as part of the primary surgery. A total of 4469 publications were identified. After review, 35 articles were included in the analysis. Prolapse-related inclusion criteria were: (1) apical prolapse (n = 20, 57.1%); (2) overall prolapse (n = 8, 22.8%); or (3) both (n = 6, 17.1%). Definitions of apical prolapse (relative to the hymen) included: (1) apical prolapse >-1 cm (n = 13, 50.0%); (2) apical prolapse >+1 cm (n = 7, 26.9%); (3) apical

  11. Our Everyday Cup of Coffee: The Chemistry behind Its Magic

    Science.gov (United States)

    Petracco, Marino

    2005-08-01

    Coffee beverages are so popular all over the world that there is hardly any need to describe them. But underlying this seemingly commonplace beverage there is a whole realm worth serious scientific study. The complexity of the raw seed matrix, made even more intricate when roasted, requires a deep understanding of its chemical nature. While coffee is not consumed for nutritional purposes, it is appreciated for its taste appeal along with its stimulating effects on mental and physical activity. The attention to quality is of paramount importance to both of these aspects to supply the customers with a pleasant and wholesome product. The chemical approach to the sensory sphere has seen the development of increasingly sophisticated analytical methods where the parts per billion of volatile aromas are not the ultimate frontier of detection limits. In spite of the progress of instrumental techniques, the cup-testing approach still remains the final assessment tool to obtain the approval for choosing the right plant and for conveying the product to the market. This is even truer when espresso, the fashionable type of coffee brewing methods, is considered.

  12. The RoboCup Mixed Reality League - A Case Study

    Science.gov (United States)

    Gerndt, Reinhard; Bohnen, Matthias; da Silva Guerra, Rodrigo; Asada, Minoru

    In typical mixed reality systems there is only a one-way interaction from real to virtual. A human user or the physics of a real object may influence the behavior of virtual objects, but real objects usually cannot be influenced by the virtual world. By introducing real robots into the mixed reality system, we allow a true two-way interaction between virtual and real worlds. Our system has been used since 2007 to implement the RoboCup mixed reality soccer games and other applications for research and edutainment. Our framework system is freely programmable to generate any virtual environment, which may then be further supplemented with virtual and real objects. The system allows for control of any real object based on differential drive robots. The robots may be adapted for different applications, e.g., with markers for identification or with covers to change shape and appearance. They may also be “equipped” with virtual tools. In this chapter we present the hardware and software architecture of our system and some applications. The authors believe this can be seen as a first implementation of Ivan Sutherland’s 1965 idea of the ultimate display: “The ultimate display would, of course, be a room within which the computer can control the existence of matter …” (Sutherland, 1965, Proceedings of IFIPS Congress 2:506-508).

  13. NETWORK ANALYSIS OF PORTUGUESE TEAM ON FIFA WORLD CUP 2014

    Directory of Open Access Journals (Sweden)

    Rui Sousa Mendes,

    2015-05-01

    Full Text Available Match analysis has been using in football case to identify properties and patterns of teams (Sarmento et al., 2014. From the regular notational analysis until the most recent computational tactical metrics, a lot of different outcomes can be possible to extract from a single match (Clemente, Couceiro, Martins, & Mendes, 2015. In the specific case of football, the cooperation among team-members is one of the main factors that contribute for a better performance (Grund, 2012. Thus, to analyse such cooperation the Social Network Analysis have been used to identify how team-members are connected and if there are cooperation tendencies inside the team (Clemente et al., 2015. The prominent players have been also analysed in order to identify the central players in the team (Clemente, Couceiro, Martins, & Mendes, 2014.Objectives: Therefore, using the social network analysis approach the aim of this study was to analyse the centrality levels of Portuguese positional roles during the FIFA World Cup 2014 and to identify the prominent tactical positions that determined the moments with ball.

  14. TNSA Heavy Ion Measurements using the Time-Resolved Tandem Faraday Cup

    Science.gov (United States)

    Ginnane, M. K.; Kousar, B.; Slish, J.; Palmisano, K.; Mandanas, S.; Padalino, S. J.; Sangster, T. C.; Regan, S.; Mileham, C.; Stoeckl, C.

    2016-10-01

    The MTW Laser at LLE utilizes an ultra-intense laser to produce high-energy heavy ion pulses through Target Normal Sheath Acceleration (TNSA). Using the Time-Resolved Tandem Faraday Cup (TRTF) the total number of heavy ions produced by TNSA can be determined, which is needed for stellar nuclear reaction cross section measurements. TNSA heavy ions stop within the thin walled front cup, while light ions pass through it and deposit their remaining charge in the back cup. A two channel storage scope measures voltages produced by the beam currents collected in the cups, respectively. The charge state fraction of plasma ions is modified by passing the heavy ions through a charge-exchange foil at the TRTF entrance. While passing through the foil, ions equilibrate to known charge states based on their velocities. Using time of flight, the total heavy ion current can be normalized to the correct charge state fraction. A pair of dipole magnets deflect relativistic TNSA electrons from the cup's entrance. They also prevent secondary electrons from escaping the front and back cups. Funded in part by a LLE contract through the DOE.

  15. [Development of the ceramic sandwich cup used for the hip joint prosthesis.].

    Science.gov (United States)

    Konvicková, S; Cech, O

    1995-01-01

    The abrasion of the polyethylene seems to be the most important factor participating on the endoprosthesis loosening. From this reason, the ceramics (AI2O3) was introduced for the both parts of the prosthesis, i. e. the head and the cup. It appears that the friction resistance is an important factor for the comparison of the hitherto applied endoprosthesis designs with the new developed type. The frictional resistance in the hip joint total prosthesis was measured by means of a testing device which allowed a swinging motion of the ceramic ball in the tested cup in the range of +/-25 degrees . This measurement was carried out at the loading levels being 0; 500; 1000; 1500 and 2000 N. For the comparison of the frictional resistance of single measured couples "cup-head", the energy consumed was ascertained which was necessary for including a swinging motion over the time interval of 35 sec. Ceramic cups manufactured by a. s. DIAS Turnov were used for the measurement. Altogether eight couples "ceramics-ceramics" having the diameter differences ranging from 0,022 mm to 0,137 mm and one friction couple "polyethylene cup-ceramics ball" were measured. The research of influence of different lubricants was also done. Key words: sandwich cup, total prosthesis, ceramics--ceramics, bioceramics, frictional resistance.

  16. dlx and sp6-9 Control optic cup regeneration in a prototypic eye.

    Directory of Open Access Journals (Sweden)

    Sylvain W Lapan

    2011-08-01

    Full Text Available Optic cups are a structural feature of diverse eyes, from simple pit eyes to camera eyes of vertebrates and cephalopods. We used the planarian prototypic eye as a model to study the genetic control of optic cup formation and regeneration. We identified two genes encoding transcription factors, sp6-9 and dlx, that were expressed in the eye specifically in the optic cup and not the photoreceptor neurons. RNAi of these genes prevented formation of visible optic cups during regeneration. Planarian regeneration requires an adult proliferative cell population with stem cell-like properties called the neoblasts. We found that optic cup formation occurred only after migration of progressively differentiating progenitor cells from the neoblast population. The eye regeneration defect caused by dlx and sp6-9 RNAi can be explained by a failure to generate these early optic cup progenitors. Dlx and Sp6-9 genes function as a module during the development of diverse animal appendages, including vertebrate and insect limbs. Our work reveals a novel function for this gene pair in the development of a fundamental eye component, and it utilizes these genes to demonstrate a mechanism for total organ regeneration in which extensive cell movement separates new cell specification from organ morphogenesis.

  17. Study on simulation and experiment of array micro Faraday cup ion detector for FAIMS

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    An array micro Faraday cup ion detector for FAIMS (High-field Asymmetric Waveform Ion Mobility Spectrometry) was introduced, with which the size of the FAIMS system was reduced. With simple structure, good stability, low noise, large measurements range, this detector can work under the condition of atmospheric pressure. The array micro Faraday cup was composed of gate electrode, sensitive electrode and shielding electrode. The sensitive electrode was made of tens of crossing silicon columns with diameter of 200 μm. It was fabricated through typical MEMS technology, which was compatible completely with plane FAIMS. It was shown from FLUENT simulation result that the resistance to gas motion was low and the flow field distribution was helpful for full absorption of the ion in this array design. Through electricity simulation, the method to reduce interference on the detection signal of the micro Faraday cup was given out. Connecting with KEITHLEY 237 ampere meter, the noise level of the array micro Faraday cup was lower than 0.5 pA. The output signal of the acetone sample measured by experiment was about 210 pA. Through contrast experiment, the design parameter of the micro Faraday cup was obtained primarily. This array micro Faraday cup can meet the requirements of the FAIMS system.

  18. Myocardial edema in Takotsubo syndrome mimicking apical hypertrophic cardiomyopathy: An insight into diagnosis by cardiovascular magnetic resonance.

    Science.gov (United States)

    Izgi, Cemil; Ray, Sanjoy; Nyktari, Evangelia; Alpendurada, Francisco; Lyon, Alexander R; Rathore, Sudhir; Baksi, Arun John

    2015-01-01

    Myocardial edema is one of the characteristic features in the pathogenesis of Takotsubo syndrome. We report a middle aged man who presented with typical clinical and echocardiographic features of apical variant of Takotsubo syndrome. However, a cardiovascular magnetic resonance study performed 10 days after presentation did not show any apical 'ballooning' but revealed features of an apical hypertrophic cardiomyopathy on cine images. Tissue characterization with T2 weighted images proved severe edema as the cause of significantly increased apical wall thickness. A follow-up cardiovascular magnetic resonance study was performed 5 months later which showed that edema, wall thickening and the appearance of apical hypertrophic cardiomyopathy all resolved, confirming Takotsubo syndrome as the cause of the initial appearance. As the affected myocardium most commonly involves the apical segments, an edema induced increase in apical wall thickness may lead to appearances of an apical hypertrophic cardiomyopathy rather than apical ballooning in the acute to subacute phase of Takotsubo syndrome.

  19. Radial left ventricular dyssynchrony by speckle tracking in apical versus non apical right ventricular pacing- evidence of dyssynchrony on medium term follow up

    Directory of Open Access Journals (Sweden)

    Dinesh Choudhary

    2016-03-01

    Conclusion: Pacing in non apical location (RV mid septum or low RVOT is associated with less dyssynchrony by specific measures like 2D radial strain and correlates with better ventricular function in long term.

  20. Shoot apical meristem maintenance: the art of a dynamic balance.

    Science.gov (United States)

    Carles, Cristel C; Fletcher, Jennifer C

    2003-08-01

    The aerial structure of higher plants derives from cells at the tip of the stem, in the shoot apical meristem (SAM). Throughout the life of a plant, the SAM produces stem tissues and lateral organs, and also regenerates itself. For correct growth, the plant must maintain a constant flow of cells through the meristem, where the input of dividing pluripotent stem cells offsets the output of differentiating cells. This flow depends on extracellular signaling within the SAM, governed by a spatial regulatory feedback loop that maintains a reservoir of stem cells, and on factors that prevent meristem cells from differentiating prematurely. The terminating floral meristem incorporates the spatial regulation scheme into a temporal regulation pathway involving flower patterning factors.

  1. Cryopreservation of Galanthus elwesii Hook. apical meristems by droplet vitrification.

    Science.gov (United States)

    Maslanka, M; Panis, B; Bach, A

    2013-01-01

    The aim of this study was to develop an efficient cryopreservation protocol for the geophyte giant snowdrop (Galanthus elwesii Hook.) that guarantees a high rate of survival and plant regeneration after cryopreservation. The excised apical meristems were obtained from cultures of in vitro grown bulb scales. Using a vitrification procedure and optimizing the duration of the exposure to the loading solution (LS), meristem post-rewarm survival rates higher than 90 percent were achieved. Also regrowth percentages were very high, ranging from 87 to 91 percent. After optimizing the time of exposure to the plant vitrification solution (PVS2), the survival rate was between 83 and 97 percent. During post-rewarm regeneration, good growth recovery was as high as 76 percent; however, hyperhydration and callusing were also observed. The results demonstrate that cryopreservation of Galanthus elwesii germplasm seems to be feasible.

  2. Geometry of shoot apical dome and distribution of growth rates

    Directory of Open Access Journals (Sweden)

    Jerzy Nakielski

    2014-01-01

    Full Text Available The distribution of the relative elementary rate of growth (RERG in apical domes of various shapes and patterns of displacement lines can be analytically examined. The geometry of these domes may be described by parabolas of n-th order, the variant of the distribution of linear growth rate should be established along any displacement line (e.g. along the axis and then the RERG can be studied as the function depending on the position coordinates and the parameter n. Such investigations of several aplical domes of various shapes have been performed. The results confirm the occurrence of the minimum of relative, elementary growth rate (in volume in the subapical region of the dome independently of the type of geometry (n parabola order.

  3. Risk variables of external apical root resorption during orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Maria Carolina Feio Barroso

    2012-04-01

    Full Text Available INTRODUCTION: External apical root resorption (EARR is an adverse outcome of the orthodontic treatment. So far, no single or associated factor has been identified as responsible for EARR due to tooth movement. OBJECTIVE: This study investigated the association of risk variables (age, gender, extraction for orthodontic treatment and Angle classification with EARR and orthodontic treatment. METHOD: The sample (n=72 was divided into two groups according to presence (n=32 or absence (n=40 of EARR in maxillary central and lateral incisors after orthodontic treatment. RESULTS: There were no statistically significant differences in EARR according to age, gender, extraction or type of malocclusion (p>0.05. CONCLUSION: The risk variables examined were not associated with EARR in the study population.

  4. Growth and development of the root apical meristem.

    Science.gov (United States)

    Perilli, Serena; Di Mambro, Riccardo; Sabatini, Sabrina

    2012-02-01

    A key question in plant developmental biology is how cell division and cell differentiation are balanced to modulate organ growth and shape organ size. In recent years, several advances have been made in understanding how this balance is achieved during root development. In the Arabidopsis root meristem, stem cells in the apical region of the meristem self-renew and produce daughter cells that differentiate in the distal meristem transition zone. Several factors have been implicated in controlling the different functional zones of the root meristem to modulate root growth; among these, plant hormones have been shown to play a main role. In this review, we summarize recent findings regarding the role of hormone signaling and transcriptional networks in regulating root development.

  5. Serious arrhythmias in patients with apical hypertrophic cardiomyopathy

    Energy Technology Data Exchange (ETDEWEB)

    Okishige, Kaoru; Sasano, Tetsuo; Yano, Kei; Azegami, Kouji; Suzuki, Kou; Itoh, Kuniyasu [Yokohama Red Cross Hospital (Japan)

    2001-05-01

    We report cases of serious arrhythmias associated with apical hypertrophic cardiomyopathy (AHCM). Thirty-one patients were referred to our institute to undergo further assessment of their AHCM from 1988 to 1999. Three patients with nonsustained ventricular tachycardia demonstrated an {sup 123}I-MIBG regional reduction in the tracer uptake. In two patients with ventricular fibrillation (VF), the findings from {sup 123}I-MIBG imaging revealed regional sympathetic denervation in the inferior and lateral regions. Electrophysiologic study demonstrated reproducible induction of VF in aborted sudden death and presyncopal patients, resulting in the need for an implantable defibrillator device and amiodarone in each patient. Patients with refractory atrial fibrillation with a rapid ventricular response suffered from serious congestive heart failure. A prudent assessment and strategy in patients with this disease would be indispensable in avoiding a disastrous outcome. (author)

  6. Oral microbiota species in acute apical endodontic abscesses

    Directory of Open Access Journals (Sweden)

    Noelle George

    2016-03-01

    Full Text Available Background and objectives: Acute apical abscesses are serious endodontic diseases resulting from pulpal infection with opportunistic oral microorganisms. The objective of this study was to identify and compare the oral microbiota in patients (N=18 exhibiting acute apical abscesses, originating from the demographic region in Portland, Oregon. The study hypothesis is that abscesses obtained from this demographic region may contain unique microorganisms not identified in specimens from other regions. Design: Endodontic abscesses were sampled from patients at the Oregon Health & Science University (OHSU School of Dentistry. DNA from abscess specimens was subjected to polymerase chain reaction amplification using 16S rRNA gene-specific primers and Cy3-dCTP labeling. Labeled DNA was then applied to microbial microarrays (280 species generated by the Human Oral Microbial Identification Microarray Laboratory (Forsyth Institute, Cambridge, MA. Results: The most prevalent microorganisms, found across multiple abscess specimens, include Fusobacterium nucleatum, Parvimonas micra, Megasphaera species clone CS025, Prevotella multisaccharivorax, Atopobium rimae, and Porphyromonas endodontalis. The most abundant microorganisms, found in highest numbers within individual abscesses, include F. nucleatum, P. micra, Streptococcus Cluster III, Solobacterium moorei, Streptococcus constellatus, and Porphyromonas endodontalis. Strong bacterial associations were identified between Prevotella multisaccharivorax, Acidaminococcaceae species clone DM071, Megasphaera species clone CS025, Actinomyces species clone EP053, and Streptococcus cristatus (all with Spearman coefficients >0.9. Conclusions: Cultivable and uncultivable bacterial species have been identified in endodontic abscesses obtained from the Portland, Oregon demographic region, and taxa identifications correlated well with other published studies, with the exception of Treponema and Streptococcus cristae, which

  7. General Assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : 1- Adoption de l’ordre du jour. 2- Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. 3- Présentation et approbation du rapport d’activités 2014. 4- Présentation et approbation du rapport financier 2014. 5- Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. 6- Programme 2015. 7- Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. 8- Pas de modifications aux Statuts de l'Association du personnel proposée. 9- Élections des membres de la Commission é...

  8. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    Mardi 5 avril à 11 h 00 BE Auditorium Meyrin (6-2-024) Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 mai 2015. Présentation et approbation du rapport d’activités 2015. Présentation et approbation du rapport financier 2015. Présentation et approbation du rapport des vérificateurs aux comptes pour 2015. Programme de travail 2016. Présentation et approbation du projet de budget 2016 Approbation du taux de cotisation pour 2017. Modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commissio...

  9. General assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. Présentation et approbation du rapport d’activités 2014. Présentation et approbation du rapport financier 2014. Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. Programme 2015. Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. Pas de modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commission électorale. &am...

  10. General Assembly

    CERN Multimedia

    Staff Association

    2017-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 avril 2016. Présentation et approbation du rapport d’activités 2016. Présentation et approbation du rapport financier 2016. Présentation et approbation du rapport des vérificateurs aux comptes pour 2016. Programme de travail 2017. Présentation et approbation du projet de budget 2017 Approbation du taux de cotisation pour 2018. Modifications aux Statuts de l'Association du personnel proposées. Élections des membres de la Commission électorale. Élections des vérifica...

  11. Aquaporin-2: COOH terminus is necessary but not sufficient for routing to the apical membrane.

    NARCIS (Netherlands)

    Deen, P.M.T.; Balkom, B.W.M. van; Savelkoul, P.J.M.; Kamsteeg, E.J.; Raak, M.M.J.P. van; Jennings, M.L.; Muth, T.R.; Rajendran, V.; Caplan, M.J.

    2002-01-01

    Renal regulation of mammalian water homeostasis is mediated by the aquaporin-1 (AQP1) water channel, which is expressed in the apical and basolateral membranes of proximal tubules and descending limbs of Henle, and aquaporin-2 (AQP2), which is redistributed from intracellular vesicles to the apical

  12. Determination of working length for teeth with wide or immature apices: a review.

    Science.gov (United States)

    Kim, Y J A; Chandler, N P

    2013-06-01

    Practitioners face several challenges during the root canal treatment of teeth with wide or immature apices, one of which is working length determination. There is relatively little data regarding the value of radiography and electronic apex locator (EAL) use when root formation is incomplete, and supplementary measurement techniques may be helpful. This review considers length determination for canals with wide or completely open apices in permanent and primary teeth. The Ovid Medline, Web of Science and Scopus databases were searched individually and in combinations to August 2012 using the subject headings 'working length determination' and 'open apex' and revealed only one article. Further headings, 'tooth apex', 'apical constriction', 'resorption', 'foramen size', 'mature root apex', 'immature root apex', 'working length determination', 'apexification', 'open apices', 'open apex', 'open apical foramina', 'canal length determination', 'immature teeth', 'apical diameters', 'electronic apex locators', 'primary teeth', 'treatment outcome' and 'clinical outcome' were entered. Potentially useful articles were chosen for a manual search of bibliography as well as a forward search of citations. Other investigations revealed case reports and some research related to open apices and laboratory studies evaluating EALs, radiography and tactile methods. Some involved permanent teeth of various apical diameters and primary teeth with and without resorption. There is a need to define the term 'open apex'. Clinicians should be aware of the benefits and limitations of all canal measuring techniques involved in managing this problem.

  13. Prognostic factors in apical surgery with root-end filling: a meta-analysis

    DEFF Research Database (Denmark)

    von Arx, Thomas; Peñarrocha, Miguel; Jensen, Storgård

    2010-01-01

    Apical surgery has seen continuous development with regard to equipment and surgical technique. However, there is still a shortage of evidence-based information regarding healing determinants. The objective of this meta-analysis was to review clinical articles on apical surgery with root-end fill...

  14. Micro‐CT analyses of apical enlargement and molar root canal complexity

    DEFF Research Database (Denmark)

    Markvart, M.; Darvann, Tron Andre; Larsen, P.

    2012-01-01

    Markvart M, Darvann TA, Larsen P, Dalstra M, Kreiborg S, Bjørndal L. Micro‐CT analyses of apical enlargement and molar root canal complexity. International Endodontic Journal, 45, 273–281, 2012. Aim To compare the effectiveness of two rotary hybrid instrumentation techniques with focus on apical...

  15. Haemostatic effect and tissue reactions of methods and agents used for haemorrhage control in apical surgery

    DEFF Research Database (Denmark)

    Jensen, Simon Storgaard; Yazdi, P M; Hjørting-Hansen, Erik

    2010-01-01

    To compare the haemostatic effect and tissue reactions of different agents and methods used for haemorrhage control in apical surgery.......To compare the haemostatic effect and tissue reactions of different agents and methods used for haemorrhage control in apical surgery....

  16. Neisseria gonorrhoeae breaches the apical junction of polarized epithelial cells for transmigration by activating EGFR.

    Science.gov (United States)

    Edwards, Vonetta L; Wang, Liang-Chun; Dawson, Valerie; Stein, Daniel C; Song, Wenxia

    2013-06-01

    Neisseria gonorrhoeae initiates infection at the apical surface of columnar endocervical epithelial cells in the female reproductive tract. These cells provide a physical barrier against pathogens by forming continuous apical junctional complexes between neighbouring cells. This study examines the interaction of gonococci (GC) with polarized epithelial cells. We show that viable GC preferentially localize at the apical side of the cell-cell junction in polarized endometrial and colonic epithelial cells, HEC-1-B and T84. In GC-infected cells, continuous apical junctional complexes are disrupted, and the junction-associated protein β-catenin is redistributed from the apical junction to the cytoplasm and to GC adherent sites; however, overall cellular levels remain unchanged. This redistribution of junctional proteins is associated with a decrease in the 'fence' function of the apical junction but not its 'gate' function. Disruption of the apical junction by removing calcium increases GC transmigration across the epithelial monolayer. GC inoculation induces the phosphorylation of both epidermal growth factor receptor (EGFR) and β-catenin, while inhibition of EGFR kinase activity significantly reduces both GC-induced β-catenin redistribution and GC transmigration. Therefore, the gonococcus is capable of weakening the apical junction and polarity of epithelial cells by activating EGFR, which facilitates GC transmigration across the epithelium.

  17. Rugby World Cup 2015: World Rugby injury surveillance study.

    Science.gov (United States)

    Fuller, Colin W; Taylor, Aileen; Kemp, Simon P T; Raftery, Martin

    2017-01-01

    To determine the incidence, severity and nature of injuries sustained during the Rugby World Cup (RWC) 2015 together with the inciting events leading to the injuries. A prospective, whole population study. 639 international rugby players representing 20 countries. The study protocol followed the definitions and procedures recommended in the consensus statement for epidemiological studies in rugby union; output measures included players' age (years), stature (cm), body mass (kg) and playing position, and the group-level incidence (injuries/1000 player-hours), mean and median severity (days-absence), location (%), type (%) and inciting event (%) for match and training injuries. Incidence of injury was 90.1 match injuries/1000 player-match-hours (backs: 100.4; forwards: 81.1) and 1.0 training injuries/1000 player-training-hours (backs: 0.9; forwards: 1.2). The mean severity of injuries was 29.8 days-absence (backs: 30.4; forwards: 29.1) during matches and 14.4 days-absence (backs: 6.3; forwards: 19.8) during training. During matches, head/face (22.0%), knee (16.2%), muscle-strain (23.1%) and ligament-sprain (23.1%) and, during training, lower limb (80.0%) and muscle-strain (60.0%) injuries were the most common locations and types of injury. Being-tackled (24.7%) was the most common inciting event for injury during matches and rugby-skills-contact activities (70.0%) the most common during training. While the incidence, nature and inciting events associated with match injuries at RWC 2015 were similar to those reported previously for RWCs 2007 and 2011, there were increasing trends in the mean severity and total days-absence through injury. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  18. Aerobic power and peak power of elite America's Cup sailors.

    Science.gov (United States)

    Neville, Vernon; Pain, Matthew T G; Folland, Jonathan P

    2009-05-01

    Big-boat yacht racing is one of the only able bodied sporting activities where standing arm-cranking ('grinding') is the primary physical activity. However, the physiological capabilities of elite sailors for standing arm-cranking have been largely unreported. The purpose of the study was to assess aerobic parameters, VO(2peak) and onset of blood lactate (OBLA), and anaerobic performance, torque-crank velocity and power-crank velocity relationships and therefore peak power (P (max)) and optimum crank-velocity (omega(opt)), of America's Cup sailors during standing arm-cranking. Thirty-three elite professional sailors performed a step test to exhaustion, and a subset of ten grinders performed maximal 7 s isokinetic sprints at different crank velocities, using a standing arm-crank ergometer. VO(2peak) was 4.7 +/- 0.5 L/min (range 3.6-5.5 L/min) at a power output of 332 +/- 44 W (range 235-425 W). OBLA occurred at a power output of 202 +/- 31 W (61% of W(max)) and VO(2) of 3.3 +/- 0.4 L/min (71% of VO(2peak)). The torque-crank velocity relationship was linear for all participants (r = 0.9 +/- 0.1). P (max) was 1,420 +/- 37 W (range 1,192-1,617 W), and omega(opt) was 125 +/- 6 rpm. These data are among the highest upper-body anaerobic and aerobic power values reported. The unique nature of these athletes, with their high fat-free mass and specific selection and training for standing arm cranking, likely accounts for the high values. The influence of crank velocity on peak power implies that power production during on-board 'grinding' may be optimised through the use of appropriate gear-ratios and the development of efficient gear change mechanisms.

  19. Total hip arthroplasty with cementless cup after acetabular fracture

    Directory of Open Access Journals (Sweden)

    Marcelo Alfonso Lugones

    2012-12-01

    Full Text Available Background Acetabular fractures are a common cause of degenerative hip arthritis. The incidence of post-traumatic osteoarthritis has been reported between 12% and 57% and avascular necrosis of the femoral head may occur in 2% to 40% after posterior fracture dislocation. The fracture is often caused by major trauma in road accidents, at work or during sports, and patients usually present for total hip replacement (THR at an earlier age than the general arthritic population. We describe and analyze our patients with uncemented acetabular reconstruction in post-traumatic arthritis and compare them with THR in non-traumatic arthritis. Methods We retrospectively evaluated 19 patients who underwent uncemented acetabular reconstruction due to post-traumatic arthritis secondary to acetabular fracture. Results The average age at the time of arthroplasty was 52.2 years (19-83. The age at the time of fracture was 47.9 years (16-81. The average time between the acetabular fracture and THR was 52.4 months (4-360. The average follow-up was 4.25 years. No acetabular component loosening or infections were seen in either group. The Harris Hip Score at an average follow-up of 4.25 years was 89.3 (57-99. The follow-up in the control group with non-traumatic arthritis was 4.9 years, and the Harris Hip Score was 94.1 points (78-100. There were no significant difference in the Harris Hip Score between groups (p = 0.24. Conclusion Uncemented acetabular reconstruction in post-traumatic arthritis secondary to acetabular fracture is a more difficult procedure than routine arthroplasty in patient with non-traumatic arthritis. In the short-term there are no clinical or radiographic differences in THR with uncemented acetabular cups in post-traumatic arthritis patients compared to patients with non-traumatic arthritis.

  20. Uncertainties in Cup Anemometer Calibrations. Type A and Type B uncertainties

    Energy Technology Data Exchange (ETDEWEB)

    Eecen, P.J. Eecen; De Noord, M. [ECN Wind Energy, Petten (Netherlands)

    2005-06-01

    ECN Wind Energy is accredited according ISO 17025 to perform power performance measurements of wind turbines following IEC 61400-12 and Measnet. The typical results of these measurements are measured power curves of the wind turbines. These curves show the electrical power versus the wind speed. Part of the power performance analysis is the uncertainty analysis. In power performance measurements according IEC 61400-12 or Measnet, the wind speed is measured using cup anemometers. The uncertainty of the wind speed measurements depends among others on the calibration uncertainty. The cup-anemometer calibration uncertainty is divided in Type A and Type B uncertainty. The Type A uncertainty is the statistical uncertainty of the wind speed measurement and can be calculated from the wind speed measurements. The Type B uncertainty includes all uncertainties that do not have a statistical background. For example, these are uncertainties due to temperature changes, air pressure changes, transducer gain influences, and digital conversion influences, etc. This document presents an overview of the type B uncertainties of a cup anemometer calibration following the Measnet 'Cup Anemometer Calibration Procedure, Version 1, September 1997' and the proposal for the IEC 61400-12 that is currently under vote. For the calculations, the numbers applying to the DEWI wind tunnel are used throughout the report. It is shown that the cup anemometer in wind tunnels has unstable behaviour due to the turbulent wakes of the cups. An analysis of uncertainties due to regression in cup anemometer calibrations is presented and compared to the standard uncertainty.

  1. Molecular cloning of major allergen from Cupressus arizonica pollen: Cup a 1.

    Science.gov (United States)

    Aceituno, E; Del Pozo, V; Mínguez, A; Arrieta, I; Cortegano, I; Cárdaba, B; Gallardo, S; Rojo, M; Palomino, P; Lahoz, C

    2000-12-01

    The family Cupressaceae is a relevant source of allergens that causes winter respiratory allergies. Cloning and sequencing the major antigen of Cupressus arizonica is important for a better diagnosis and treatment of sensitized patients. To obtain a full-length complementary DNA for Cup a 1, the major allergen of Cupressus arizonica pollen. It was cloned and sequenced and the recombinant protein was expressed. Messenger RNA from Cupressus arizonica pollen was obtained and the Cup a 1 sequence was established using a 3'-RACE system and primers based on the N-terminal amino acid sequence. Recombinant Cup a 1 was cloned in pBluescript and expressed in a glycosylated form in rabbit reticulocytes. The cDNA was subcloned in pGEX-5X-1 and expressed in Escherichia coli as a fusion protein with GST. Recombinant Cup a 1 is highly homologous with the major allergens of mountain cedar (Jun a 1), Japanese cypress (Cha o 1) and Japanese cedar (Cry j 1). Cup a 1 contains three potential N-glycosylation sites that are different from those found in Jun a 1 and Cry j 1. The cloned protein contains a pectate lyase active site identical to those of Cry j 1 and Jun a 1. The IgE from patients' sera recognizes recombinant Cup a 1, and this reactivity is higher with the glycosylated protein. Cup a 1 has been cloned and sequenced. As expected, the high degree of homology with Cha o 1, Jun a 1 and Cry j 1 explains the cross-reactivity of conifer pollens. Different IgE reactivity with the glycosylated and non-glycosylated protein suggests the importance of carbohydrate moieties in the IgE binding site.

  2. Yeast CUP1 protects HeLa cells against copper-induced stress

    Energy Technology Data Exchange (ETDEWEB)

    Xie, X.X. [Department of Animal Sciences, School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai (China); Shanghai Key Laboratory of Veterinary Biotechnology, Shanghai (China); College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou (China); Ma, Y.F.; Wang, Q.S.; Chen, Z.L.; Liao, R.R.; Pan, Y.C. [Department of Animal Sciences, School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai (China); Shanghai Key Laboratory of Veterinary Biotechnology, Shanghai (China)

    2015-06-12

    As an essential trace element, copper can be toxic in mammalian cells when present in excess. Metallothioneins (MTs) are small, cysteine-rich proteins that avidly bind copper and thus play an important role in detoxification. YeastCUP1 is a member of the MT gene family. The aim of this study was to determine whether yeast CUP1 could bind copper effectively and protect cells against copper stress. In this study,CUP1 expression was determined by quantitative real-time PCR, and copper content was detected by inductively coupled plasma mass spectrometry. Production of intracellular reactive oxygen species (ROS) was evaluated using the 2',7'-dichlorofluorescein-diacetate (DCFH-DA) assay. Cellular viability was detected using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and the cell cycle distribution of CUP1 was analyzed by fluorescence-activated cell sorting. The data indicated that overexpression of yeast CUP1 in HeLa cells played a protective role against copper-induced stress, leading to increased cellular viability (P<0.05) and decreased ROS production (P<0.05). It was also observed that overexpression of yeast CUP1 reduced the percentage of G1 cells and increased the percentage of S cells, which suggested that it contributed to cell viability. We found that overexpression of yeast CUP1 protected HeLa cells against copper stress. These results offer useful data to elucidate the mechanism of the MT gene on copper metabolism in mammalian cells.

  3. Glyphosate effects on the gene expression of the apical bud in soybean (Glycine max).

    Science.gov (United States)

    Jiang, Ling-Xue; Jin, Long-Guo; Guo, Yong; Tao, Bo; Qiu, Li-Juan

    2013-08-09

    Glyphosate is a broad spectrum, non-selective herbicide which has been widely used for weed control. Much work has focused on elucidating the high accumulation of glyphosate in shoot apical bud (shoot apex). However, to date little is known about the molecular mechanisms of the sensitivity of shoot apical bud to glyphosate. Global gene expression profiling of the soybean apical bud response to glyphosate treatment was performed in this study. The results revealed that the glyphosate inhibited tryptophan biosynthesis of the shikimic acid pathway in the soybean apical bud, which was the target site of glyphosate. Glyphosate inhibited the expression of most of the target herbicide site genes. The promoter sequence analysis of key target genes revealed that light responsive elements were important regulators in glyphosate induction. These results will facilitate further studies of cloning genes and molecular mechanisms of glyphosate on soybean shoot apical bud. Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Endodontic management of open apex using Biodentine as a novel apical matrix.

    Science.gov (United States)

    Khetarpal, Ambica; Chaudhary, Sarika; Talwar, Sangeeta; Verma, Mahesh

    2014-01-01

    Endodontic management of open apex using Biodentine as an apical matrix. Summary : An immature tooth with pulpal necrosis and periapical pathology imposes a great difficulty to the endodontist. Endodontic treatment options for such teeth consist of conventional apexification procedure with and without apical barriers. Biodentine™ is new calcium silicate based cement that exhibits physical and chemical properties similar to those described for certain Portland cement derivatives. This article demonstrates the use of the newer material, Biodentine as an apical matrix barrier in root end apexification procedure. This case reports present apexification and successful healing with the use of Biodentine as an apical barrier matrix. Conclusion : Apexification in one step using an apical plug of Biodentine can be considered a predictable treatment and may be an alternative to mineral trioxide aggregate apexification.

  5. Effect of master apical file size and taper on irrigation and cleaning of the apical third of curved canals.

    Directory of Open Access Journals (Sweden)

    Nahid Mohammadzadeh Akhlaghi

    2014-04-01

    Full Text Available Canal preparation generates a substantial amount of debris and smear layer (SL. The size and taper of the Master Apical File (MAF affects on penetration of irrigants and subsequently canal cleaning efficacy. The aim of this study was to evaluate the effect of MAF size and taper on penetration of irrigants to the apical third of curved mesiobuccal (MB canals of mandibular first molars.Eighty-nine human mandibular first molars were divided into one control group (n=5 without rotary instrumentation and 6 experimental groups (n=14 each that were prepared with the following RaCe rotary files as MAF: 25.04 (group1, 25.06 (group 2, 30.04 (group 3, 30.06 (group 4, 35.04 (group 5 and 35.06 (group 6. All the experimental groups were rinsed with 2 ml of 17 % EDTA followed by 2 ml of 5.25% NaOCl. Debridement of the MB canals was evaluated using scanning electron microscope (SEM. The data were statistically analyzed using Kruskal-Wallis and Mann-Whitney U tests (P<0.05.Group 6 (MAF=35.06 showed 100% acceptable debridement. This rate was 92.9% for MAF=35.04. In group 4 (MAF=30.06 smear layer (SL was removed in the three-forth of the samples and debris was removed in 92.9% of them. Acceptable debridement was not achieved in most samples of groups 1 and 2 (25.04 and 25.06, respectively and the mentioned two groups had statistically significant difference in this respect with the other groups (P<0.05.Based on this study, 30.06 may be considered as the minimum MAF size for acceptable debridement.

  6. Assembly and Folding of Twisted Baskets in Organic Solvents.

    Science.gov (United States)

    Pratumyot, Yaowalak; Chen, Shigui; Hu, Lei; Polen, Shane M; Hadad, Christopher M; Badjić, Jovica D

    2016-09-02

    A synthetic method for obtaining enantiopure and twisted baskets of type (P)-3 is described. These chiral cavitands were found to fold quinoline gates, at the rim of their twisted platform, in acetonitrile and give molecular capsules that assemble into large unilamellar vesicles. In a less polar dichloromethane, however, cup-shaped (P)-3 packed into vesicles but with the quinoline gates in an unfolded orientation. The ability of twisted baskets to form functional nanostructured materials could be of interest for building stereoselective sensors and catalysts.

  7. The efficacy of a “double-D-shaped” wire marker for radiographic measurement of acetabular cup orientation and wear

    OpenAIRE

    Derbyshire, Brian; Raut, Videshnandan V.

    2013-01-01

    Historically, wire markers were attached to cemented all-plastic acetabular cups to demarcate the periphery and to measure socket wear. The wire shape was either a semi-circle passing over the pole of the cup, or a circle around the cup equator. More recently, “double-D” shaped markers were introduced with a part-circular aspect passing over the pole and a semi-circular aspect parallel to the equatorial plane. This configuration enabled cup retroversion to be distinguished from anteversion. I...

  8. Apical Ca2+-activated potassium channels in mouse parotid acinar cells.

    Science.gov (United States)

    Almassy, Janos; Won, Jong Hak; Begenisich, Ted B; Yule, David I

    2012-02-01

    Ca(2+) activation of Cl and K channels is a key event underlying stimulated fluid secretion from parotid salivary glands. Cl channels are exclusively present on the apical plasma membrane (PM), whereas the localization of K channels has not been established. Mathematical models have suggested that localization of some K channels to the apical PM is optimum for fluid secretion. A combination of whole cell electrophysiology and temporally resolved digital imaging with local manipulation of intracellular [Ca(2+)] was used to investigate if Ca(2+)-activated K channels are present in the apical PM of parotid acinar cells. Initial experiments established Ca(2+)-buffering conditions that produced brief, localized increases in [Ca(2+)] after focal laser photolysis of caged Ca(2+). Conditions were used to isolate K(+) and Cl(-) conductances. Photolysis at the apical PM resulted in a robust increase in K(+) and Cl(-) currents. A localized reduction in [Ca(2+)] at the apical PM after photolysis of Diazo-2, a caged Ca(2+) chelator, resulted in a decrease in both K(+) and Cl(-) currents. The K(+) currents evoked by apical photolysis were partially blocked by both paxilline and TRAM-34, specific blockers of large-conductance "maxi-K" (BK) and intermediate K (IK), respectively, and almost abolished by incubation with both antagonists. Apical TRAM-34-sensitive K(+) currents were also observed in BK-null parotid acini. In contrast, when the [Ca(2+)] was increased at the basal or lateral PM, no increase in either K(+) or Cl(-) currents was evoked. These data provide strong evidence that K and Cl channels are similarly distributed in the apical PM. Furthermore, both IK and BK channels are present in this domain, and the density of these channels appears higher in the apical versus basolateral PM. Collectively, this study provides support for a model in which fluid secretion is optimized after expression of K channels specifically in the apical PM.

  9. Evaluation of apical subtype of hypertrophic cardiomyopathy using cardiac magnetic resonance imaging with gadolinium enhancement.

    Science.gov (United States)

    Kebed, Kalie Y; Al Adham, Raed I; Bishu, Kalkidan; Askew, J Wells; Klarich, Kyle W; Araoz, Philip A; Foley, Thomas A; Glockner, James F; Nishimura, Rick A; Anavekar, Nandan S

    2014-09-01

    Apical hypertrophic cardiomyopathy (HC) is an uncommon variant of HC. We sought to characterize cardiac magnetic resonance imaging (MRI) findings among apical HC patients. This was a retrospective review of consecutive patients with a diagnosis of apical HC who underwent cardiac MRI examinations at the Mayo Clinic (Rochester, MN) from August 1999 to October 2011. Clinical and demographic data at the time of cardiac MRI study were abstracted. Cardiac MRI study and 2-dimensional echocardiograms performed within 6 months of the cardiac MRI were reviewed; 96 patients with apical HC underwent cardiac MRI examinations. LV end-diastolic and end-systolic volumes were 130.7 ± 39.1 ml and 44.2 ± 20.9 ml, respectively. Maximum LV thickness was 19 ± 5 mm. Hypertrophy extended beyond the apex into other segments in 57 (59.4%) patients. Obstructive physiology was seen in 12 (12.5%) and was more common in the mixed apical phenotype than the pure apical (19.3 vs 2.6%, p = 0.02). Apical pouches were noted in 39 (40.6%) patients. Late gadolinium enhancement (LGE) was present in 70 (74.5%) patients. LGE was associated with severe symptoms and increased maximal LV wall thickness. In conclusion, cardiac MRI is well suited for studying the apical form of HC because of difficulty imaging the cardiac apex with standard echocardiography. Cardiac MRI is uniquely suited to delineate the presence or absence of an apical pouch and abnormal myocardial LGE that may have implications in the natural history of apical HM. In particular, the presence of abnormal LGE is associated with clinical symptoms and increased wall thickness.

  10. Effects of apical meristem mining on plant fitness, architecture, and flowering phenology in Cirsium altissimum (Asteraceae).

    Science.gov (United States)

    Adhikari, Subodh; Russell, F Leland

    2014-12-01

    • Interactions that limit lifetime seed production have the potential to limit plant population sizes and drive adaptation through natural selection. Effects of insect herbivory to apical meristems (apical meristem mining) on lifetime seed production rarely have been quantified experimentally. We studied Cirsium altissimum (tall thistle), whose meristems are mined by Platyptilia carduidactyla (artichoke plume moth), to determine how apical damage affects plant maternal fitness and evaluate both direct and indirect mechanisms underlying these effects.• In restored prairie, apical mining was manipulated on tall thistles by applying insecticide, water, or no spray to apical meristems. We quantified effects on lifetime seed production, plant architecture, and flowering phenology. Seed germinability and seedling mass were evaluated in a greenhouse.• Apical meristem miners decreased lifetime seed production of C. altissimum, but not seed quality. Higher mortality rates of damaged plants contributed to reduced seed production. Apical damage reduced plant height and increased the proportion of blooming flower heads in axial positions on branches. Apical damage delayed flowering and shortened flowering duration.• Apical meristem mining reduced plant maternal fitness. The shift in the identity of blooming flower heads from terminal to axial positions contributed to this reduction because axial heads are less fecund. Shorter, meristem-mined plants may have been more susceptible to competition, and this susceptibility may explain their higher mortality rates. The kinds of changes in architecture and phenology that resulted from apical damage to C. altissimum have been shown to affect floral visitation in other plant species. © 2014 Botanical Society of America, Inc.

  11. Deformation T-Cup: a new multi-anvil apparatus for controlled strain-rate deformation experiments at pressures above 18 GPa.

    Science.gov (United States)

    Hunt, Simon A; Weidner, Donald J; McCormack, Richard J; Whitaker, Matthew L; Bailey, Edward; Li, Li; Vaughan, Michael T; Dobson, David P

    2014-08-01

    A new multi-anvil deformation apparatus, based on the widely used 6-8 split-cylinder, geometry, has been developed which is capable of deformation experiments at pressures in excess of 18 GPa at room temperature. In 6-8 (Kawai-type) devices eight cubic anvils are used to compress the sample assembly. In our new apparatus two of the eight cubes which sit along the split-cylinder axis have been replaced by hexagonal cross section anvils. Combining these anvils hexagonal-anvils with secondary differential actuators incorporated into the load frame, for the first time, enables the 6-8 multi-anvil apparatus to be used for controlled strain-rate deformation experiments to high strains. Testing of the design, both with and without synchrotron-X-rays, has demonstrated the Deformation T-Cup (DT-Cup) is capable of deforming 1-2 mm long samples to over 55% strain at high temperatures and pressures. To date the apparatus has been calibrated to, and deformed at, 18.8 GPa and deformation experiments performed in conjunction with synchrotron X-rays at confining pressures up to 10 GPa at 800 °C .

  12. Deformation T-Cup: A new multi-anvil apparatus for controlled strain-rate deformation experiments at pressures above 18 GPa

    Science.gov (United States)

    Hunt, Simon A.; Weidner, Donald J.; McCormack, Richard J.; Whitaker, Matthew L.; Bailey, Edward; Li, Li; Vaughan, Michael T.; Dobson, David P.

    2014-08-01

    A new multi-anvil deformation apparatus, based on the widely used 6-8 split-cylinder, geometry, has been developed which is capable of deformation experiments at pressures in excess of 18 GPa at room temperature. In 6-8 (Kawai-type) devices eight cubic anvils are used to compress the sample assembly. In our new apparatus two of the eight cubes which sit along the split-cylinder axis have been replaced by hexagonal cross section anvils. Combining these anvils hexagonal-anvils with secondary differential actuators incorporated into the load frame, for the first time, enables the 6-8 multi-anvil apparatus to be used for controlled strain-rate deformation experiments to high strains. Testing of the design, both with and without synchrotron-X-rays, has demonstrated the Deformation T-Cup (DT-Cup) is capable of deforming 1-2 mm long samples to over 55% strain at high temperatures and pressures. To date the apparatus has been calibrated to, and deformed at, 18.8 GPa and deformation experiments performed in conjunction with synchrotron X-rays at confining pressures up to 10 GPa at 800 °C .

  13. The effect of geometry and abduction angle on the stresses in cemented UHMWPE acetabular cups – finite element simulations and experimental tests

    Directory of Open Access Journals (Sweden)

    Santavirta Seppo S

    2005-05-01

    Full Text Available Abstract Background Contact pressure of UHMWPE acetabular cup has been shown to correlate with wear in total hip replacement (THR. The aim of the present study was to test the hypotheses that the cup geometry, abduction angle, thickness and clearance can modify the stresses in cemented polyethylene cups. Methods Acetabular cups with different geometries (Link®: IP and Lubinus eccentric were tested cyclically in a simulator at 45° and 60° abduction angles. Finite element (FE meshes were generated and two additional designs were reconstructed to test the effects of the cup clearance and thickness. Contact pressures at cup-head and cup-cement interfaces were calculated as a function of loading force at 45°, 60° and 80° abduction angles. Results At the cup-head interface, IP experienced lower contact pressures than the Lubinus eccentric at low loading forces. However, at higher loading forces, much higher contact pressures were produced on the surface of IP cup. An increase in the abduction angle increased contact pressure in the IP model, but this did not occur to any major extent with the Lubinus eccentric model. At the cup-cement interface, IP experienced lower contact pressures. Increased clearance between cup and head increased contact pressure both at cup-head and cup-cement interfaces, whereas a decreased thickness of polyethylene layer increased contact pressure only at the cup-cement interface. FE results were consistent with experimental tests and acetabular cup deformations. Conclusion FE analyses showed that geometrical design, thickness and abduction angle of the acetabular cup, as well as the clearance between the cup and head do change significantly the mechanical stresses experienced by a cemented UHMWPE acetabular cup. These factors should be taken into account in future development of THR prostheses. FE technique is a useful tool with which to address these issues.

  14. Faraday cup detector array with electronic multiplexing for multichannel mass spectrometry

    CERN Document Server

    Scheidemann, A A; Schumacher, F J; Isakharov, A

    2002-01-01

    A Faraday cup detector array (FCDA) and electronic multiplexing circuit have been developed for position sensitive ion beam detection. The entire FCDA always remains open to intercept the incident ion beam flux, and each cup is periodically and sequentially discharged through the electronic multiplexer. This produces true multichannel ion beam detection since none of the incident ion beam flux is lost, as is the case for scanning position sensitive detectors, and higher sensitivity detection is thus obtained. The FCDA consists of a one-dimensional or two-dimensional array of individual cups which are electrostatically isolated from each other by means of an intervening ground conductor, with resulting fill factors F of 58% to 85%. Each cup acts as a charge collector and integrator which is quickly discharged during the readout to create a time-multiplexed output signal that gives the position distribution of the ion beam. When N cups are sequentially scanned and read out, the ion collection efficiency is F(1-...

  15. PERANAN METODE PENGOBATAN ISLAM CUPPING THERAPY DALAM PENURUNAN KADAR GLUKOSA DARAH

    Directory of Open Access Journals (Sweden)

    Cut Khairunnisa

    2016-06-01

    Full Text Available The Role of Islamic Treatment Method “Cupping Therapy” to Decrease Blood Glucose Levels. Cupping therapy has long been used by most Muslims and it has occupied as prominent position among therapeutic approaches.The proof of medical modern research lately have been supports expediency therapy which recommended by the prophet. Nowdays,many medical experts who know the benefits of cupping therapy in treating diseases. Diabetes melitus is a disease that is directly related to blood glucose levels. According to the International Diabetes Federation (IDF in 2013, there were 382 million people suffer from diabetes melitus worldwide and Indonesia as seventh ranks in the world. This study aims to determine the effect of cupping therapy on blood glucose levels in patients of Klinik Sehat dr. Abdurrahmân Medan in 2014. The Study used pre-experimental method with one group pre-test and post-test without a control group and sample took by randomization with a sample of 32 people. Based on the Wilcoxon test with á = 0.05 obtained p-value = 0.021 that means there were a significant differences in mean blood glucose levels before and after cupping therapy (p-value < á.

  16. Cup anemometer response to the wind turbulence-measurement of the horizontal wind variance

    Directory of Open Access Journals (Sweden)

    S. Yahaya

    2004-11-01

    Full Text Available This paper presents some dynamic characteristics of an opto-electronic cup anemometer model in relation to its response to the wind turbulence. It is based on experimental data of the natural wind turbulence measured both by an ultrasonic anemometer and two samples of the mentioned cup anemometer. The distance constants of the latter devices measured in a wind tunnel are in good agreement with those determined by the spectral analysis method proposed in this study. In addition, the study shows that the linear compensation of the cup anemometer response, beyond the cutoff frequency, is limited to a given frequency, characteristic of the device. Beyond this frequency, the compensation effectiveness relies mainly on the wind characteristics, particularly the direction variability and the horizontal turbulence intensity. Finally, this study demonstrates the potential of fast cup anemometers to measure some turbulence parameters (like wind variance with errors of the magnitude as those deriving from the mean speed measurements. This result proves that fast cup anemometers can be used to assess some turbulence parameters, especially for long-term measurements in severe climate conditions (icing, snowing or sandy storm weathers.

  17. The Effects of Dry Cupping Therapy on the Shoulder Pain and Fatigue of Nurses

    Directory of Open Access Journals (Sweden)

    Dorina Sohn

    2011-06-01

    Full Text Available Objective: This research was done to identify the effects of dry cupping therapy on the shoulder pain and fatigue of nurses. Methods: The research design was time series design. The participants were 27 nurses with shoulder pain at P University Hospital in Busan metropolitan city from July 6, 2009 to August 3, 2009. The dry cupping therapy was done 4 times, twice a week for 2 weeks. Before intervention, the severity and frequency of pain and fatigue were measured three times at one week intervals, and then those were measured after one week and two weeks of experimental treatment. The results were analyzed using descriptive statistics, paired t-test and repeated measure ANOVA with the SPSS program. Results: There were statistically significant difference in severity and frequency of shoulder pain,and fatigue after dry cupping therapy. Dry cupping therapy was effective for the management of shoulder pain and fatigue among nurses in this study. Conclusion: Therefore dry cupping therapy can be considered an effective nursing intervention that relieves shoulder pain and fatigue of nurses.

  18. Development of cup-shaped micro-electromechanical systems-based vector hydrophone

    Science.gov (United States)

    Xu, Wei; Liu, Yuan; Zhang, Guojun; Wang, Renxin; Xue, Chenyang; Zhang, Wendong; Liu, Jun

    2016-09-01

    Similar to the vital performance factors, the receiving sensitivity and the bandwidth exist interactively in the micro-electromechanical systems (MEMS)-based vector hydrophones. Some existing methods can improve the sensitivity of the hydrophone, but these improvements are usually gained at a cost of the bandwidth. However, the cup-shaped MEMS vector hydrophone that is presented in this paper can improve its sensitivity while retaining a sufficient bandwidth. The cup-shaped structure acts as a new sensing unit in the MEMS vector hydrophone, replacing the bionic columnar hair that was previously used for sensing. The relationships between the parameters of the cup-shaped structure and the sensitivity of the vector hydrophone were determined by a theoretical deduction. In addition, simulation analyses were performed, and optimized structural parameters were obtained in this work. ANSYS 15.0 simulation was used to derive the optimum characteristics for the cup-shaped structure. The results of the calibration experiments showed that the sensitivity reached up to -188.5 dB (gain of 40 dB, 1 kHz, 0 dB@1 V/μPa), and the bandwidth was in the 20 Hz-1 kHz range, which is sufficient for an underwater acoustic detection at low frequencies. This work has, thus, proved that the cup-shaped vector hydrophone has superior properties for the engineering applications.

  19. Radiological and migration results of the DURALOC(R)-cup after two years

    CERN Document Server

    Juen, F

    2000-01-01

    4 years of implantation was assessed to be 1.23 mm, however a decreasing speed of migration over the final 2-year-period was indicated. Our results demonstrate that statements relating to migration results of particular cups are more accurate after four years. However, statements about mean migration values are possible after two years. A migration speed of 1 mm total migration within the first 2 years after operation was predictive for radiological loosening of the cup after four years (p=0,0004). Further, appearance of postoperative gaps in zone one of the cup correlate with high migration values later leading to radiological loosening and may be a result of errors during implantation. However, we could demonstrate that presence of gaps around the cup postoperatively is an important factor for later loosening. With consideration to the findings concerning the DURALOC(R) cup within four years of implantation, predictions of results over a long term may be undesirable. In 1997 a study was conduced concerning ...

  20. Cup anemometer response to the wind turbulence-measurement of the horizontal wind variance

    Science.gov (United States)

    Yahaya, S.; Frangi, J.

    2004-10-01

    This paper presents some dynamic characteristics of an opto-electronic cup anemometer model in relation to its response to the wind turbulence. It is based on experimental data of the natural wind turbulence measured both by an ultrasonic anemometer and two samples of the mentioned cup anemometer. The distance constants of the latter devices measured in a wind tunnel are in good agreement with those determined by the spectral analysis method proposed in this study. In addition, the study shows that the linear compensation of the cup anemometer response, beyond the cutoff frequency, is limited to a given frequency, characteristic of the device. Beyond this frequency, the compensation effectiveness relies mainly on the wind characteristics, particularly the direction variability and the horizontal turbulence intensity. Finally, this study demonstrates the potential of fast cup anemometers to measure some turbulence parameters (like wind variance) with errors of the magnitude as those deriving from the mean speed measurements. This result proves that fast cup anemometers can be used to assess some turbulence parameters, especially for long-term measurements in severe climate conditions (icing, snowing or sandy storm weathers).

  1. Comparison of apical sealing and periapical extrusion of the ThermaFil obturation technique with and without MTA as an apical barrier: An in vitro study

    Directory of Open Access Journals (Sweden)

    Satish Kumar

    2011-01-01

    Full Text Available Aim: The aim of the study was to compare the conventional ThermaFil obturation technique and ThermaFil obturation with mineral trioxide aggregate (MTA as an apical barrier, with regard to apical sealing and extrusion. Materials and Methods: Twenty extracted human canines were instrumented using a crown-down technique and divided into two groups. The experimental group was obturated using ThermaFil obturation with MTA as an apical barrier and the control group was obturated using the conventional ThermaFil obturation technique. AH Plus sealer was used in both the groups. Apical extrusion was recorded. Teeth of both the groups were coated with nail polish, except for the apical 3 mm. After 24 h, they were suspended in black India ink for 48 h. Canines were decalcified, rendered transparent, and linear dye penetration was measured under ×40 stereomicroscope. Results: There was a significant extrusion noticed in conventional ThermaFil obturation technique. Frequency of extrusion of sealer and/or gutta-percha was supposed to be evaluated using χ² test, but since the values of the samples of ThermaFil plus MTA group were zero, statistical analysis could not be conducted, whereas linear dye leakage was calculated with Mann-Whitney U test because the distribution was abnormal. Conclusion: Although ThermaFil plus MTA group showed microleakage, extrusion of sealer and the core material was prevented in comparison with conventional ThermaFil obturation technique. It is advantageous to use MTA as an apical plug as there is no fear of apical extrusion and the root canal system can then be packed three dimensionally against this barrier using any thermoplasticized gutta-percha obturation technique.

  2. Pro-oxidant status and matrix metalloproteinases in apical lesions and gingival crevicular fluid as potential biomarkers for asymptomatic apical periodontitis and endodontic treatment response

    Directory of Open Access Journals (Sweden)

    Dezerega Andrea

    2012-03-01

    Full Text Available Abstract Background Oxidative stress and matrix metalloproteinases -9 and -2 are involved in periodontal breakdown, whereas gingival crevicular fluid has been reported to reflect apical status. The aim of this study was to characterize oxidant balance and activity levels of MMP -2 and -9 in apical lesions and healthy periodontal ligament; and second, to determine whether potential changes in oxidant balance were reflected in gingival crevicular fluid from asymptomatic apical periodontitis (AAP-affected teeth at baseline and after endodontic treatment. Methods Patients with clinical diagnosis of AAP and healthy volunteers having indication of tooth extraction were recruited. Apical lesions and healthy periodontal ligaments, respectively, were homogenized or processed to obtain histological tissue sections. Matrix metalloproteinase -9 and -2 levels and/or activity were analyzed by Immunowestern blot, zymography and consecutive densitometric analysis, and their tissue localization was confirmed by immunohistochemistry. A second group of patients with AAP and indication of endodontic treatment was recruited. Gingival crevicular fluid was extracted from AAP-affected teeth at baseline, after endodontic treatment and healthy contralateral teeth. Total oxidant and antioxidant status were determined in homogenized tissue and GCF samples. Statistical analysis was performed using STATA v10 software with unpaired t test, Mann-Whitney test and Spearman's correlation. Results Activity of MMP-2 and MMP-9 along with oxidant status were higher in apical lesions (p Conclusions Apical lesions display an oxidant imbalance along with increased activity of matrix metalloproteinase-2 and -9 and might contribute to AAP progression. Oxidant imbalance can also be reflected in GCF from AAP-affected teeth and was restored to normal levels after conservative endodontic treatment. These mediators might be useful as potential biomarkers for chair-side complementary diagnostic

  3. The efficacy of a "double-D-shaped" wire marker for radiographic measurement of acetabular cup orientation and wear.

    Science.gov (United States)

    Derbyshire, Brian; Raut, Videshnandan V

    2013-01-01

    Historically, wire markers were attached to cemented all-plastic acetabular cups to demarcate the periphery and to measure socket wear. The wire shape was either a semi-circle passing over the pole of the cup, or a circle around the cup equator. More recently, "double-D" shaped markers were introduced with a part-circular aspect passing over the pole and a semi-circular aspect parallel to the equatorial plane. This configuration enabled cup retroversion to be distinguished from anteversion. In this study, the accuracy of radiographic measurement of cup orientation and wear was assessed for cups with "double-D" and circular markers. Each cup was attached to a measurement jig which could vary the anteversion/retroversion and internal/external rotation of the cup. A metal femoral head was fixed within the socket and radiographic images were created for all combinations of cup orientation settings. The images were measured using software with automatic edge detection, and cup orientation and zero-wear accuracies were determined for each setting. The median error for cup version measurements was similar for both types of wire marker (0.2° double-D marker, -0.24° circular marker), but measurements of the circular marker were more repeatable. The median inclination errors were 2.05° (double-D marker) and 0.23° (circular marker). The median overall "zero wear" errors were 0.19 mm (double-D marker) and 0.03 mm (circular marker). Measurements of the circular wire marker were much more repeatable.

  4. Apical constriction initiates new bud formation during monopodial branching of the embryonic chicken lung

    Science.gov (United States)

    Kim, Hye Young; Varner, Victor D.; Nelson, Celeste M.

    2013-01-01

    Branching morphogenesis sculpts the airway epithelium of the lung into a tree-like structure to conduct air and promote gas exchange after birth. In the avian lung, a series of buds emerges from the dorsal surface of the primary bronchus via monopodial branching to form the conducting airways; anatomically, these buds are similar to those formed by domain branching in the mammalian lung. Here, we show that monopodial branching is initiated by apical constriction of the airway epithelium, and not by differential cell proliferation, using computational modeling and quantitative imaging of embryonic chicken lung explants. Both filamentous actin and phosphorylated myosin light chain were enriched at the apical surface of the airway epithelium during monopodial branching. Consistently, inhibiting actomyosin contractility prevented apical constriction and blocked branch initiation. Although cell proliferation was enhanced along the dorsal and ventral aspects of the primary bronchus, especially before branch formation, inhibiting proliferation had no effect on the initiation of branches. To test whether the physical forces from apical constriction alone are sufficient to drive the formation of new buds, we constructed a nonlinear, three-dimensional finite element model of the airway epithelium and used it to simulate apical constriction and proliferation in the primary bronchus. Our results suggest that, consistent with the experimental results, apical constriction is sufficient to drive the early stages of monopodial branching whereas cell proliferation is dispensable. We propose that initial folding of the airway epithelium is driven primarily by apical constriction during monopodial branching of the avian lung. PMID:23824575

  5. Numerical simulation of wrinkle phenomenon during multi-point forming process of shallow rectangle cup

    Institute of Scientific and Technical Information of China (English)

    裴永生; 李明哲; 李雪; 隋振

    2004-01-01

    In this paper, the principle of multi-point forming (MPF) technique is presented. One of the most serious defects, wrinkling, during the multi-point forming process of a shallow rectangle cup is discussed by means of numerical simulation on the shallow rectangle cup forming process. The effects of thickness, material of sheet metal and the pressure of the blank holder are investigated. Based on the simulation results, the reasons and control methods of wrinkling are pointed out. Moreover, the experiment on the multi-point die forming of the shallow rectangle cup by the MPF machine is done to validate the efficiency of the numerical simulation,and the result proves that the application of an elastic cushion in the forming can restrain wrinkling efficiently.

  6. Observation on Clinical Effects of Acupotomy plus Cupping for Knee Osteoarthritis

    Institute of Scientific and Technical Information of China (English)

    Gu Jun-qing; Guo Yan-ming; Liang Yong-ying

    2014-01-01

    Objective: To observe the clinical effect of acupotomy plus cupping for knee osteoarthritis (KOA). Methods: Sixty cases with KOA were randomly divided into a treatment group and a control group, 30 cases in each group. The patients in the treatment group were given acupotomy and cupping, while the patients in the control group were given injection of Sodium Hyaluronate. The index of severity for osteoarthritis (ISOA), the change of the effusion of knee joint and clinical effects were observed after treatment. Results: The total effective rate was respectively 96.7% in the treatment group and 66.7% in the control group. The difference in the clinical effects between the two groups was statistically significant (P Conclusion: Acupotomy plus cupping is better than injection of Sodium Hyaluronate in treatment of KOA.

  7. Validation of 3D sonic-anemometer against cup anemometer response

    DEFF Research Database (Denmark)

    Hansen, Kurt Schaldemose; Larsen, Gunner Chr.; Courtney, Michael

    2004-01-01

    Determination and validation of wind turbine power curves traditionally rely on single point wind speed measurements recorded with a calibrated cup-anemometer. The power curve verification process, which is typically performed in different terrain types, does not always result in satisfactory...... agreement between measures- and predicted power curves. The observed disagreement is premarily believed to relate to the cup-anemometers being sensitive to tilted flow i.e. that the measurement of the horizontal flow component is sensible to flow in a plane perpendicular to the horizontal plane. Furthermore......, the limited cup-anemometer response due to high turbulence can explain some of the diviations. The present paper investigates this problem, by analysing full-scale time series data extracted from "Database on Wind Characteristics" (http://www.winddata.com/), which represents a wide range of sites. Basically...

  8. Comparison of Obstetric Efficacy and Safety of the Kiwi OmniCup with Conventional Vacuum Extraction.

    Science.gov (United States)

    Siggelkow, W; Schwarz, N; Beckmann, M W; Kehl, S; Faschingbauer, F; Schild, R L

    2014-02-01

    Purpose: The aim of the present study was to compare the safety and efficacy of the Kiwi OmniCup system with conventional vacuum delivery. Methods: A retrospective study of operative vaginal deliveries was done for 4682 births. The procedures included 217 operative vaginal deliveries (4.6 %), 79 of which were done using conventional vacuum extraction (37 %) and 138 using the Kiwi system (63 %). Results: Use of the Kiwi system was associated with a significant reduction in episiotomies (61 vs. 76 % in the control group; p Kiwi system and 99 % with conventional vacuum delivery). Cup detachment occurred significantly more often in the Kiwi group (p Kiwi system is an acceptable alternative to the conventional vacuum cup. The advantages of the Kiwi system are its significantly lower episiotomy rate and its ease and rapidity of use.

  9. Cultural change--empowerment at Sweetheart Cup Company, Inc., Bakery Division.

    Science.gov (United States)

    Altomonte, W; Mooney, W; Sheldon, D H

    1999-08-01

    Sweetheart Cup Company always has been associated with fun products--fast food containers, straws, ballpark drink glasses, and maybe the most fun of all--ice cream cones! But making these products of pleasantry at times has not been as festive as it would seem. Sweetheart Cup Company has had its ups and downs in terms of many of the typical manufacturing measurements, but in 1994--under the direction of newly appointed Chief Operating Officer Bill McLaughlin--Sweetheart Cup Company embarked on a new mission. This time everyone would be involved, from headquarters staff in Owings Mills to the fourth-floor oven area workers in the Dallas bakery. The new process goal, "Business Excellence," as we called it, was really an implementation of Class A ERP/MRP II.

  10. ACCUWIND - Classification of five cup anemometers according to IEC61400-12-1

    Energy Technology Data Exchange (ETDEWEB)

    Friis Pedersen, T.; Dahlberg, J.Aa.; Busche, P.

    2006-05-15

    The characteristics of five cup anemometers were investigated in detail, and data are presented in figures and tables. The characteristics include: normal wind tunnel calibrations; angular response measurements at 5, 8 and 11m/s; torque coefficient curve measurements from combined tilt and ramp-gust tests, torque coefficient curve measurements for non-tilted conditions; rotor inertia measurements and measurements of friction of bearings at temperatures -10 deg. C to 40 deg. C. The characteristics are fitted to two different time domain cup anemometer models, and simulations of the cup anemometers are made with artificial wind generators to make classifications according to annex I and J of the standard IEC 61400-12-1 on power performance measurements. Results of classification are shown in graphs of systematic deviations and class index tables. (au)

  11. Effects of Turbulence and Flow Inclination on the Performance of Cup Anemometers in the Field

    Science.gov (United States)

    Papadopoulos, K.H.; Stefantos, N.C.; Paulsen, U.S.; Morfiadakis, E.

    Four commercial and one research cup anemometers were comparatively tested in a complex terrain site to quantify the effects of turbulence and flow inclination on the wind speed measurements. The difference of the mean windspeed reading between the anemometers was as much as 2% for wind directions where the mean flow was horizontal. This difference was large enough to be attributed to the well-known overspeeding effect related to the differing distance constant (ranging from 1.7 to 5 m) of the cup anemometers. The application of a theoretical model of the cup-anemometer behaviour in athree-dimensional turbulent wind field proved successful in explaining theobserved differences.Additional measurements were taken with the anemometers tilted at known angles into and out of the incident wind flow. Thus, a field-derived angular response curve is constructed for each anemometer and the deviations from publishedwind-tunnel results are discussed.

  12. Development of a standardised cup anemometer suited to wind energy applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dahlberg, J.Aa.; Gustavsson, J.; Ronsten, G. [Aeronautical Research Inst. of Sweden, Bromma (Sweden); Friis Pedersen, T.; Schmidt Paulsen, U. [Risoe National Laboratory, Roskilde (Denmark); Westermann, D. [German Wind Energy Inst., Wilhelmshaven (Germany)

    2002-05-01

    Errors associated with the measurements and interpretation of the measured wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well calibrated anemometers of different types often show significant and not acceptable differences. The objective were to determine the optimum design for a cup anemometer which should be free from the design faults associated with all of the instruments currently commercially available. The objective were also to prepare a classification system for cup anemometers which will allow users of anemometry in the wind energy field to rank and select anemometers suited to specific required applications. The extensive experiments including tests in wind tunnels, of more than 500 anemometer configurations, fields tests and tests in laboratories together with the assessment and modelling work have helped to build up a thorough knowledge of the importance of different design parameters in terms of various behavioural effects. Influenced by trends from the international standardisation work, an early decision was made to focus on a vector, 3D, (angle-insensitive anemometer) cup-anemometer and to focus on conical cups since their sensitivity to vertical velocity components appeared to be less sensitive to the wind speed. The key measures taken to develop the new design consisted of an appropriate selection of the detailed design of the cup geometry's and mounting the cups at appropriate radius on a slender symmetric body. The development finally ended with an anemometer that gave a very good flat response within 1 % over the range from -45 deg to +35 deg and had a good linear calibration curve. Four prototypes of the anemometer optimised for flat response were produced. The flat response was also confirmed by field tests over the range {+-}20 deg. A patent application of the new anemometer was filed on the 6th of October 2000. By the time the project was initiated there was a

  13. Faraday Cup for Electron Flux Measurements on the Microtron MT 25

    Directory of Open Access Journals (Sweden)

    M. Vognar

    2001-01-01

    Full Text Available The basic criteria for constructing of an evacuated Faraday cup for precise measurement of 5 to 25 MeV electron beam currents in air from a microtron are established. The Faraday cup, built in the microtron laboratory of the Faculty of Nuclear Sciences and Physical Engineering of CTU Prague, is described together with the electronic chain and its incorporation in the measuring line on the beam. Measures to reduce the backward escape of electrons are explained. The range of currents is from 10–5 to 10–10 A. The diameter of the Al entry window of the Faraday cup is 1.8 cm, and its area is 2.54 cm2. The thickness of the entry window is 0.1 mm.

  14. Modeling the Morphometric Evolution of the Maize Shoot Apical Meristem.

    Science.gov (United States)

    Leiboff, Samuel; DeAllie, Christopher K; Scanlon, Michael J

    2016-01-01

    The maize (Zea mays subsp. mays L.) shoot apical meristem (SAM) is a self-replenishing pool of stem cells that produces all above-ground plant tissues. Improvements in image acquisition and processing techniques have allowed high-throughput, quantitative genetic analyses of SAM morphology. As with other large-scale phenotyping efforts, meaningful descriptions of genetic architecture depend on the collection of relevant measures. In this study, we tested two quantitative image processing methods to describe SAM morphology within the genus Zea, represented by 33 wild relatives of maize and 841 lines from a domesticated maize by wild teosinte progenitor (MxT) backcross population, along with previously reported data from several hundred diverse maize inbred lines. Approximating the MxT SAM as a paraboloid derived eight parabolic estimators of SAM morphology that identified highly overlapping quantitative trait loci (QTL) on eight chromosomes, which implicated previously identified SAM morphology candidate genes along with new QTL for SAM morphological variation. Using a Fourier-transform related method of comprehensive shape analysis, we detected cryptic SAM shape variation that identified QTL on six chromosomes. We found that Fourier transform shape descriptors and parabolic estimation measures are highly correlated and identified similar QTL. Analysis of shoot apex contours from 73 anciently diverged plant taxa further suggested that parabolic shape may be a universal feature of plant SAMs, regardless of evolutionary clade. Future high-throughput examinations of SAM morphology may benefit from the ease of acquisition and phenotypic fidelity of modeling the SAM as a paraboloid.

  15. Embryology meets molecular biology: Deciphering the apical ectodermal ridge.

    Science.gov (United States)

    Verheyden, Jamie M; Sun, Xin

    2017-09-15

    More than sixty years ago, while studying feather tracks on the shoulder of the chick embryo, Dr. John Saunders used Nile Blue dye to stain the tissue. There, he noticed a darkly stained line of cells that neatly rims the tip of the growing limb bud. Rather than ignoring this observation, he followed it up by removing this tissue and found that it led to a striking truncation of the limb skeletons. This landmark experiment marks the serendipitous discovery of the apical ectodermal ridge (AER), the quintessential embryonic structure that drives the outgrowth of the limb. Dr. Saunders continued to lead the limb field for the next fifty years, not just through his own work, but also by inspiring the next generation of researchers through his infectious love of science. Together, he and those who followed ushered in the discovery of fibroblast growth factor (FGF) as the AER molecule. The seamless marriage of embryology and molecular biology that led to the decoding of the AER serves as a shining example of how discoveries are made for the rest of the developmental biology field. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Malignant Arrhythmia in Apical Ballooning Syndrome: Risk Factors and Outcomes

    Directory of Open Access Journals (Sweden)

    Samuel J. Asirvatham

    2008-08-01

    Full Text Available Objectives: We sought to determine the frequency and outcomes with symptomatic arrhythmia in patients with apical ballooning syndrome (ABS. Methods: A retrospective review of the Mayo Clinic Angiography database was conducted to identify patients who met the Mayo criteria for ABS. Patients with documented arrhythmias formed the study group, and 31 randomly selected patients with ABS but without arrhythmia formed the control group.Results: Out of 105 patients identified with ABS, 6 (5.7% women aged 69 +/- 9 years experienced significant arrhythmia (ventricular fibrillation, asystole, 2 patients died, and 1 required permanent pacemaker implantation. When compared with controls, the study group showed no significant difference with respect to ECG characteristics (QT, QRS duration or axis except for R-R interval variability (see comments below (30.6±6 vs 14.5±17 p = 0.0004, QTc, and P-R interval. Patients without arrhythmia were more likely to be on beta-blocker therapy than the study population (33% vs 80.6% p = 0.02. Conclusion: Life-threatening arrhythmia is uncommon (5.7% with ABS despite marked, structural abnormalities. When arrhythmias do occur, the outcome is poor. Prominent variability in R-R intervals appears to be predictive of significant arrhythmias in ABS. The role of beta-blocker therapy in preventing arrhythmia with ABS requires further investigation.

  17. Structural development and energy dissipation in simulated silicon apices

    Directory of Open Access Journals (Sweden)

    Samuel Paul Jarvis

    2013-12-01

    Full Text Available In this paper we examine the stability of silicon tip apices by using density functional theory (DFT calculations. We find that some tip structures - modelled as small, simple clusters - show variations in stability during manipulation dependent on their orientation with respect to the sample surface. Moreover, we observe that unstable structures can be revealed by a characteristic hysteretic behaviour present in the F(z curves that were calculated with DFT, which corresponds to a tip-induced dissipation of hundreds of millielectronvolts resulting from reversible structural deformations. Additionally, in order to model the structural evolution of the tip apex within a low temperature NC-AFM experiment, we simulated a repeated tip–surface indentation until the tip structure converged to a stable termination and the characteristic hysteretic behaviour was no longer observed. Our calculations suggest that varying just a single rotational degree of freedom can have as measurable an impact on the tip–surface interaction as a completely different tip structure.

  18. Structural development and energy dissipation in simulated silicon apices.

    Science.gov (United States)

    Jarvis, Samuel Paul; Kantorovich, Lev; Moriarty, Philip

    2013-12-20

    In this paper we examine the stability of silicon tip apices by using density functional theory (DFT) calculations. We find that some tip structures - modelled as small, simple clusters - show variations in stability during manipulation dependent on their orientation with respect to the sample surface. Moreover, we observe that unstable structures can be revealed by a characteristic hysteretic behaviour present in the F(z) curves that were calculated with DFT, which corresponds to a tip-induced dissipation of hundreds of millielectronvolts resulting from reversible structural deformations. Additionally, in order to model the structural evolution of the tip apex within a low temperature NC-AFM experiment, we simulated a repeated tip-surface indentation until the tip structure converged to a stable termination and the characteristic hysteretic behaviour was no longer observed. Our calculations suggest that varying just a single rotational degree of freedom can have as measurable an impact on the tip-surface interaction as a completely different tip structure.

  19. Poda apical para uniformizar a colheita de flores de ?tango?

    Directory of Open Access Journals (Sweden)

    Francine Lorena Cuquel

    1999-01-01

    Full Text Available Este trabalho testou a poda apical das hastes de tango 4 e 6 semanas após a roçada, para homogeneizar a colheita que, comercialmente, necessita ser feita por um período de aproximadamente 5 dias numa mesma área. Foram avaliados altura média das plantas no primeiro dia de colheita, número médio de hastes colhidas/planta e a média do peso de matéria seca colhida/haste. Só foi verificada diferença significativa para altura média das plantas no primeiro dia de colheita, não se conseguindo reduzir o número de colheitas necessárias por planta. Existem indicações de que há necessidade de reduzir a variabilidade genética da população para homogeneizar a colheita de inflorescências de tango.

  20. Radiographic evaluation of apical root resorption following fixed orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Sina Haghanifar

    2012-01-01

    Full Text Available Background and Aims: Apical root resorption is an adverse side effect of fixed orthodontic treatment which cannot be repaired. The aim of this study was to use panoramic radiographs to compare the root resorption before and after the orthodontic treatment with standard edgewise .018 appliance.Materials and Methods: The before and after treatment panoramic views of sixty-three patients needed fixed orthodontic treatment included 1520 teeth were categorized into 3 Grades (G0: without resorption, G1: mild resorption with blunt roots or ≤ 1/4 of root length, G2: moderate to severe resorption or > 1/4 to 1/2 of root length. Relationship between root resorption and sex and treatment duration was analyzed with Mann-whitney and Spearman's correlation coefficient, respectively.Results: The findings showed that 345 teeth were categorized as Grade 1. Grade 2 of root resorption was not found in this study. The highest amount of root resorption was recorded for the mandibular lateral incisor. In both gender, the root resorption of the mandible was more than that of the maxilla. The males showed significantly higher rate of resorption than the females (P0.05.Conclusion: The mandible and male patients showed higher amount of root resorption. In addition, root resorption was not related to the treatment duration and the side of the jaws.

  1. Neuroelectric Tuning of Cortical Oscillations by Apical Dendrites in Loop Circuits

    Directory of Open Access Journals (Sweden)

    David LaBerge

    2017-06-01

    Full Text Available Bundles of relatively long apical dendrites dominate the neurons that make up the thickness of the cerebral cortex. It is proposed that a major function of the apical dendrite is to produce sustained oscillations at a specific frequency that can serve as a common timing unit for the processing of information in circuits connected to that apical dendrite. Many layer 5 and 6 pyramidal neurons are connected to thalamic neurons in loop circuits. A model of the apical dendrites of these pyramidal neurons has been used to simulate the electric activity of the apical dendrite. The results of that simulation demonstrated that subthreshold electric pulses in these apical dendrites can be tuned to specific frequencies and also can be fine-tuned to narrow bandwidths of less than one Hertz (1 Hz. Synchronous pulse outputs from the circuit loops containing apical dendrites can tune subthreshold membrane oscillations of neurons they contact. When the pulse outputs are finely tuned, they function as a local “clock,” which enables the contacted neurons to synchronously communicate with each other. Thus, a shared tuning frequency can select neurons for membership in a circuit. Unlike layer 6 apical dendrites, layer 5 apical dendrites can produce burst firing in many of their neurons, which increases the amplitude of signals in the neurons they contact. This difference in amplitude of signals serves as basis of selecting a sub-circuit for specialized processing (e.g., sustained attention within the typically larger layer 6-based circuit. After examining the sustaining of oscillations in loop circuits and the processing of spikes in network circuits, we propose that cortical functioning can be globally viewed as two systems: a loop system and a network system. The loop system oscillations influence the network system’s timing and amplitude of pulse signals, both of which can select circuits that are momentarily dominant in cortical activity.

  2. Influence of Age and Apical Diameter on the Success of Endodontic Regeneration Procedures.

    Science.gov (United States)

    Estefan, Bishoy Safwat; El Batouty, Kariem Mostafa; Nagy, Mohamed Mokhtar; Diogenes, Anibal

    2016-11-01

    Treatment of immature permanent teeth with necrotic pulp and apical pathosis constitutes a challenge for endodontists. The present study was done to evaluate the effect of age and apical diameter on the regenerative potential of young permanent immature teeth with necrotic pulps. Immature necrotic permanent maxillary incisors (n = 40) of patients 9-18 years old were divided into 2 groups according to the treatment protocol: group Y (younger age group), 9-13 years and group O (older age group), 14-18 years. Each group was further subdivided into 2 subgroups according to apical diameter, subgroup (n) (narrower diameter) between 0.5 and 1 mm and subgroup (w) (wider diameter) equal to or greater than 1 mm. Revascularization procedures were performed for all patients. Follow-up was done for up to 12 months. Standardized radiographs were digitally evaluated for increase in root length and thickness and decrease in apical diameter. After the follow-up period, most of the cases demonstrated radiographic evidence of periapical healing. Group Y showed significant progressive increase in root length and width and decrease in apical diameter. Subgroup (w) representing wider apical diameter showed significant progress as well. It was found that revascularization procedures can be implemented in any age ranging from 9 to 18 years; however, younger age groups were better candidates for revascularization procedure than older ones. Regarding the apical diameter, regeneration procedures were successful with apical diameters as small as 0.5 mm. However, teeth with preoperative wider diameters (≥1 mm) demonstrated greater increase in root thickness, length, and apical narrowing. Copyright © 2016 American Association of Endodontists. All rights reserved.

  3. The Importance of Seed Characteristics in the Dispersal of Splash-Cup Plants

    Science.gov (United States)

    Eklof, Joel; Pepper, Rachel Pepper; Echternach, Juliana

    2016-11-01

    Splash-cup plants disperse their seeds by exploiting the kinetic energy of raindrops. When raindrops impact the splash-cup, a 3-5 mm vessel that holds seeds, the seeds are projected up to 1 m away from the parent plant. It has been established, using 3D printed models, that a 40°cone angle maximizes dispersal distance when seeds are not present in the cup. We therefore use 40°cups with the addition of different types of seeds to determine the effect that seeds of varying characteristics have on the dispersal and splash dynamics of splash-cup plants. Splash characteristics and dispersal distances of seeds with differing characteristics such as size, shape, texture, density, and hydrophobicity were compared to one another, as well as to the case of having no seeds present. We found that the presence of seeds dramatically decreased dispersal distance and changed splash characteristics (are measured by the angle and velocity of the resulting splash). In addition, different types of seeds yielded splashes with differing dispersal distance and splash characteristics. Splash characteristics and dispersal distances of glass beads of differing hydrophobicity were compared to determine the effect hydrophobicity has on dispersal and splash dynamics. These beads yielded some differences in dispersal distance, but no notable difference in splash dynamics. Models of the conical fruit bodies of the splash-cups were 3D printed and high-speed video was used to find splash characteristics, and dispersal distance was calculated by measuring the distance from the model to the final resting position of the seeds and droplets.

  4. Agro-ecological potential of the cup plant (Silphium perfoliatum L.) from a biodiversity perspective

    Science.gov (United States)

    Schrader, Stefan; Schorpp, Quentin; Lena Müller, Anna; Dauber, Jens

    2017-04-01

    The cup plant (Silphium perfoliatum L.) is an alternative bioenergy crop that may contribute to a more environmentally friendly production of renewable resources. The potential benefits of the cup plant are the perennial cultivation without tillage and its flowering-characteristics. Hence it can be hypothesized that beneficial organisms are promoted which in turn improves the provision of ecosystem services like soil fertility and pollination. To date biomass production in Germany is based mainly on cropping systems like intensive maize cultivation that bear a risk for biodiversity and ecosystem services. The importance to counteract this development increases considering the large land requirements for significant generation of energy from biomass. To what extent cropping of the cup plant meets the expectations of a sustainable biomass production was investigated within a comprehensive assessment of soil fauna communities (earthworms, collembolans, nematodes) including their functional groups as well as pollinating insects (bees and hoverflies) including the quantification of pollen and nectar in cup-plant cultivation systems with a crop management close to agricultural practice. From the results it became obvious that the cup plant as a bioenergy crop has got the necessary potential to mitigate the negative development of biodiversity and ecosystem services, especially in regions with a large share of maize monocultures. This agro-ecological potential can only be reached if certain agronomic requirements are met, i.e. a late harvest and cultivation periods of at least five years. Under these conditions the landscape context has to be considered. Semi-natural habitats in the surrounding landscape are required for nesting and larval development of wild pollinator groups. The development of biological functions in soil is tied to the land use history i.e. previous land use: Positive developments are expected for conversion of intensively managed crop fields to the

  5. Obturating teeth with wide open apices using mineral trioxide aggregate: a case report.

    Science.gov (United States)

    Levenstein, H

    2002-07-01

    The conventional approach in handling a tooth with a wide open apex requiring endodontic treatment is by means of a procedure called apexification. The objective of treatment is to introduce calcium hydroxide mixed with sterile water or local anaesthetic into the root canal to create a hard-tissue-like formation or an apical plug to prevent extrusion of filling materials during obturation of teeth with wide open apices. This procedure may take anything from 6 months to 2 years. In 1999 a new material called mineral trioxide aggregate (MTA) was introduced to the dental profession for clinical use which has the ability to create an apical plug within a few weeks.

  6. The large GTPase Mx1 is involved in apical transport in MDCK cells.

    Science.gov (United States)

    Hoff, Florian; Greb, Christoph; Hollmann, Christina; Hönig, Ellena; Jacob, Ralf

    2014-09-01

    In epithelial cells apical proteins are transported by specific transport carriers to the correct membrane domain. The composition of these carriers is heterogeneous and comprises components such as motor proteins, annexins, lectins, Rab GTPases and cargo molecules. Here, we provide biochemical and fluorescence microscopic data to show that the dynamin-related large GTPase Mx1 is a component of post-Golgi vesicles carrying the neurotrophin receptor p75(NTR) . Moreover, siRNA-mediated depletion of Mx1 significantly decreased the transport efficiency of apical proteins in MDCK cells. In conclusion, Mx1 plays a crucial role in the delivery of cargo molecules to the apical membrane of epithelial cells.

  7. HiCUP: pipeline for mapping and processing Hi-C data.

    Science.gov (United States)

    Wingett, Steven; Ewels, Philip; Furlan-Magaril, Mayra; Nagano, Takashi; Schoenfelder, Stefan; Fraser, Peter; Andrews, Simon

    2015-01-01

    HiCUP is a pipeline for processing sequence data generated by Hi-C and Capture Hi-C (CHi-C) experiments, which are techniques used to investigate three-dimensional genomic organisation. The pipeline maps data to a specified reference genome and removes artefacts that would otherwise hinder subsequent analysis. HiCUP also produces an easy-to-interpret yet detailed quality control (QC) report that assists in refining experimental protocols for future studies. The software is freely available and has already been used for processing Hi-C and CHi-C data in several recently published peer-reviewed studies.

  8. Multi Stage Strategies for Single Point Incremental Forming of a Cup

    DEFF Research Database (Denmark)

    Skjødt, Martin; Bay, Niels; Endelt, Benny

    2008-01-01

    A five stage forming strategy for forming of a circular cylindrical cup with a height/radius ratio of one is presented. Geometrical relations are discussed and theoretical strains are calculated. The influence of forming direction (upwards or downwards) is investigated for the second stage...... comparing explicit FE analysis with experiments. Good agreement is found between calculated and measured thickness distribution, overall geometry and strains. Using the proposed multi stage strategy it is shown possible to produce a cup with a height close to the radius and side parallel to the symmetry...

  9. World Cup 2006: the "magic quartet" and the analytical categories of brazilian soccer

    OpenAIRE

    Castellani,Rafael Moreno; Braga, Harian Pires

    2016-01-01

    http://dx.doi.org/10.5007/2175-8042.2016v28n49p54The World Cup has the ability to mobilize communities around the world besides gathering through soccer meanings that would allow buildings of identities. Thereby, this study had as objective identify and think over analytical categories about soccer used by sports media during the journalistic coverage of 2006 World Cup. The main thing that contributed to our choice for this edition was the recovery of recurrent categories of Brazilian soccer,...

  10. Addendum: Safety Standards for Gua sha (press-stroking) and Ba guan (cupping).

    Science.gov (United States)

    Nielsen, Arya; Kligler, Ben; Koll, Brian S

    2014-06-01

    Our previous article Safety Standards for Gua sha (press-stroking) and Baguan (cupping) discussed the risk of transfer of blood-borne pathogens with Gua sha and Ba guan, identified Gua sha and Ba guan 'instrument criticality' as semi-critical and offered recommendations for safe practice based on hospital disinfection standards. Based on the article's feedback, we feel the need to clarify that Gua sha and Ba guan instruments, if intended for reuse, must undergo high level disinfection (HLD) or, in the case of 'wet-cupping', sterilization. We update our recommendations to be amenable to both private practice and education settings.

  11. The Effects of Dry Cupping Therapy on the Shoulder Pain and Fatigue of Nurses

    OpenAIRE

    Dorina Sohn; Hyunmin Yoon; Hyangmi Jung

    2011-01-01

    Objective: This research was done to identify the effects of dry cupping therapy on the shoulder pain and fatigue of nurses. Methods: The research design was time series design. The participants were 27 nurses with shoulder pain at P University Hospital in Busan metropolitan city from July 6, 2009 to August 3, 2009. The dry cupping therapy was done 4 times, twice a week for 2 weeks. Before intervention, the severity and frequency of pain and fatigue were measured three times at one week in...

  12. Machine Learning of Multi Agents for RoboCup Soccer Domain:A Survey

    Institute of Scientific and Technical Information of China (English)

    Nadeem Iqbal; LUO Qing(罗青); LU Tian-sheng(吕恬生)

    2003-01-01

    Machine learning has been widely applied to deal with problems in complex environment such asRoboCup, which is assumed as the ideal platform for research on AI and robotic. In RoboCup simulation league,software agents play soccer games on an official soccer server over the network. When constructing these softwareagents, issues in area of agents learning techniques arise to satisfy the properties specified by agent theorists. Thispaper presented an overview of the agents learning used in the simulator teams. Many kinds of agents learningtechniques were reported and compared. It also provided open questions for discussing and pointed out some possi-ble answers to verify in near future.

  13. The Sorption Behavior of Wood Studied by Means of an Improved Cup Method

    DEFF Research Database (Denmark)

    Eitelberger, Johannes; Svensson, Staffan

    2012-01-01

    In transport models for wood, sorption is an essential parameter. Sorption is the balancing process between the two phases of water present in wood below the fiber saturation point, namely water vapor in the lumens and bound water in the cell walls. To gain better insight into the physical...... background of transport processes, a special experimental test setup—the improved cup method—is presented. It allows for separation of sorption from other processes. In this test, a diffusion cup contains a thin specimen of wood, with one side facing outwards to a climate chamber and the opposite side facing...

  14. Effects of the 2010 World Cup football tournament on emergency department assault attendances in England.

    Science.gov (United States)

    Quigg, Zara; Hughes, Karen; Bellis, Mark A

    2013-06-01

    We explore the impact of the 2010 World Cup, held in South Africa, on levels of assault attendances to 15 emergency departments in England. The majority (70.1%) of assault attendees during the 2010 World Cup was male and aged 18-34 years (52.5%). Assault attendances increased by 37.5% on the days that England played (P 001). Preparation for major sporting events in non-host countries should include violence prevention activity. Emergency department data can be used to identify violence associated with such events and thus inform both the targeting of prevention efforts and assessments of their effectiveness.

  15. Cancers of unknown primary origin (CUP) are characterized by chromosomal instability (CIN) compared to metastasis of know origin

    DEFF Research Database (Denmark)

    Vikeså, Jonas; Møller, Anne Kirstine H; Kaczkowski, Bogumil;

    2015-01-01

    BACKGROUND: Cancers of unknown primary (CUPs) constitute ~5% of all cancers. The tumors have an aggressive biological and clinical behavior. The aim of the present study has been to uncover whether CUPs exhibit distinct molecular features compared to metastases of known origin. METHODS: Employing...

  16. Demonstrating the Effects of Processing on the Structure and Physical Properties of Plastic Using Disposable PETE Cups

    Science.gov (United States)

    Erk, Kendra A.; Rhein, Morgan; Krafcik, Matthew J.; Ydstie, Sophie

    2015-01-01

    An educational activity is described in which the structure and physical properties of disposable plastic cups were directly related to the method of processing. The mechanical properties of specimens cut from the walls of poly(ethylene terephthalate) (PETE) cups, oriented parallel and perpendicular to the thermoforming direction, were measured in…

  17. A research on clinical literature of cupping therapy%走罐疗法的临床文献分析

    Institute of Scientific and Technical Information of China (English)

    李春燕; 陈波; 李霞; 陈泽林; 郭义

    2012-01-01

    评价走罐疗法临床文献的质量,分析影响走罐疗法疗效的关键要素,了解施术部位、施术工具、配合疗法、走罐时间、走罐频率、疗程等因素在走罐疗法临床应用中的概况,为提高走罐疗法的临床疗效提供计量学参考.%This paper evaluates the quality of clinical literature on cupping therapy,analyzes the key factors that influencing the effects of cupping therapy,studies the operation position,tools,accompanied therapy,cupping,cupping frequency,course and other factors in the clinical application of cupping therapy,aiming to provide reference for clinical practice.

  18. Frecuencia de periodontitis apical en tratamientos endodónticos de pregrado Frequency of apical periodontitis in endodontic treatment in undergraduate

    OpenAIRE

    León, P; MJ Ilabaca; Alcota,M; FE González

    2011-01-01

    La periodontitis apical es una enfermedad de los tejidos periapicales de etiología bacteriana. Su tratamiento requiere erradicar los microorganismos del conducto radicular y obturarlo para lograr la reparación posterior. El objetivo de éste trabajo fue determinar la frecuencia de periodontitis apical en la población que asiste a la clínica de Endodoncia de la Facultad de Odontología de la Universidad de Chile y su relación con diferentes variables: diagnóstico específico, edad, sexo, agudas v...

  19. Pulp microbiology of complete teeth with idiopathic apical lesions.

    Directory of Open Access Journals (Sweden)

    Patricia Rodríguez

    2009-11-01

    Full Text Available Introduction: Periapical changes named as lesions, in teeth with full crown integrity and without history of trauma, do not show a clear aetiology. Objective: To determine the presence of microorganisms in pulp dental tissue will clarify the cause of its death and therefore the damage to periodontal tissues. Materials and methods: From people between 10 and 39 years old, 23 teeth were selected. The samples were taken with paper points and 0.8 sterile files, and were transported in VMGA III medium, to be processed in the following 24 hours after they were taken and sowed in Brucella-agar. Results: The most affected teeth were upper central incisors, 43.8%. From the 23 studied teeth, microbiological grow was seen on 20 teeth. The following microorganisms species were identified: Fusobacterium spp., 25%, Eubacterium spp., 15%; Peptostreptococcus spp., 10%; Campylobacter spp., 10%; gram negative enteric bacteria, 10%; Porphyromonas gingivalis, 10%; Prevotella intermedia, 5%; Eikenellia corrodens, 5%; Dialister pneumosintes, 5%; and yeasts, 5%. There was no growing evidence of Actinomyces actinomycetemcomitans, Tanerella forsythensis and Streptococcus β  hemolytic. Discussion and conclusions: Sound pulp dental tissue is sterile; an injury over it will cause its inflammation, degeneration, death and bacterial contamination. Results in the present study clearly show the presence of microorganisms in closed apical dental lesions of endodontic origin. In same manner, it was seen that a great part of microorganisms species found can be regarded as periodontal pathogens. This could suggest a management with an endodontic, a periodontic and a pharmacological combined treatment.

  20. Reaction-diffusion pattern in shoot apical meristem of plants.

    Directory of Open Access Journals (Sweden)

    Hironori Fujita

    Full Text Available A fundamental question in developmental biology is how spatial patterns are self-organized from homogeneous structures. In 1952, Turing proposed the reaction-diffusion model in order to explain this issue. Experimental evidence of reaction-diffusion patterns in living organisms was first provided by the pigmentation pattern on the skin of fishes in 1995. However, whether or not this mechanism plays an essential role in developmental events of living organisms remains elusive. Here we show that a reaction-diffusion model can successfully explain the shoot apical meristem (SAM development of plants. SAM of plants resides in the top of each shoot and consists of a central zone (CZ and a surrounding peripheral zone (PZ. SAM contains stem cells and continuously produces new organs throughout the lifespan. Molecular genetic studies using Arabidopsis thaliana revealed that the formation and maintenance of the SAM are essentially regulated by the feedback interaction between WUSHCEL (WUS and CLAVATA (CLV. We developed a mathematical model of the SAM based on a reaction-diffusion dynamics of the WUS-CLV interaction, incorporating cell division and the spatial restriction of the dynamics. Our model explains the various SAM patterns observed in plants, for example, homeostatic control of SAM size in the wild type, enlarged or fasciated SAM in clv mutants, and initiation of ectopic secondary meristems from an initial flattened SAM in wus mutant. In addition, the model is supported by comparing its prediction with the expression pattern of WUS in the wus mutant. Furthermore, the model can account for many experimental results including reorganization processes caused by the CZ ablation and by incision through the meristem center. We thus conclude that the reaction-diffusion dynamics is probably indispensable for the SAM development of plants.

  1. Genetic control of maize shoot apical meristem architecture.

    Science.gov (United States)

    Thompson, Addie M; Crants, James; Schnable, Patrick S; Yu, Jianming; Timmermans, Marja C P; Springer, Nathan M; Scanlon, Michael J; Muehlbauer, Gary J

    2014-05-22

    The shoot apical meristem contains a pool of undifferentiated stem cells and generates all above-ground organs of the plant. During vegetative growth, cells differentiate from the meristem to initiate leaves while the pool of meristematic cells is preserved; this balance is determined in part by genetic regulatory mechanisms. To assess vegetative meristem growth and genetic control in Zea mays, we investigated its morphology at multiple time points and identified three stages of growth. We measured meristem height, width, plastochron internode length, and associated traits from 86 individuals of the intermated B73 × Mo17 recombinant inbred line population. For meristem height-related traits, the parents exhibited markedly different phenotypes, with B73 being very tall, Mo17 short, and the population distributed between. In the outer cell layer, differences appeared to be related to number of cells rather than cell size. In contrast, B73 and Mo17 were similar in meristem width traits and plastochron internode length, with transgressive segregation in the population. Multiple loci (6-9 for each trait) were mapped, indicating meristem architecture is controlled by many regions; none of these coincided with previously described mutants impacting meristem development. Major loci for height and width explaining 16% and 19% of the variation were identified on chromosomes 5 and 8, respectively. Significant loci for related traits frequently coincided, whereas those for unrelated traits did not overlap. With the use of three near-isogenic lines, a locus explaining 16% of the parental variation in meristem height was validated. Published expression data were leveraged to identify candidate genes in significant regions. Copyright © 2014 Thompson et al.

  2. Roles of CUP-5, the Caenorhabditis elegans orthologue of human TRPML1, in lysosome and gut granule biogenesis

    Directory of Open Access Journals (Sweden)

    Fares Hanna

    2010-06-01

    Full Text Available Abstract Background CUP-5 is a Transient Receptor Potential protein in C. elegans that is the orthologue of mammalian TRPML1. Loss of TRPML1 results in the lysosomal storage disorder Mucolipidosis type IV. Loss of CUP-5 results in embryonic lethality and the accumulation of enlarged yolk granules in developing intestinal cells. The embryonic lethality of cup-5 mutants is rescued by mutations in mrp-4, which is required for gut granule differentiation. Gut granules are intestine-specific lysosome-related organelles that accumulate birefringent material. This link between CUP-5 and gut granules led us to determine the roles of CUP-5 in lysosome and gut granule biogenesis in developing intestinal cells. Results We show that CUP-5 protein localizes to lysosomes, but not to gut granules, in developing intestinal cells. Loss of CUP-5 results in defects in endo-lysosomal transport in developing intestinal cells of C. elegans embryos. This ultimately leads to the appearance of enlarged terminal vacuoles that show defective lysosomal degradation and that have lysosomal and endosomal markers. In contrast, gut granule biogenesis is normal in the absence of CUP-5. Furthermore, loss of CUP-5 does not result in inappropriate fusion or mixing of content between lysosomes and gut granules. Conclusions Using an in vivo model of MLIV, we show that there is a defect in lysosomal transport/biogenesis that is earlier than the presumed function of TRPML1 in terminal lysosomes. Our results indicate that CUP-5 is required for the biogenesis of lysosomes but not of gut granules. Thus, cellular phenotypes in Mucolipidosis type IV are likely not due to defects in lysosome-related organelle biogenesis, but due to progressive defects in lysosomal transport that lead to severe lysosomal dysfunction.

  3. Apical constriction: themes and variations on a cellular mechanism driving morphogenesis.

    Science.gov (United States)

    Martin, Adam C; Goldstein, Bob

    2014-05-01

    Apical constriction is a cell shape change that promotes tissue remodeling in a variety of homeostatic and developmental contexts, including gastrulation in many organisms and neural tube formation in vertebrates. In recent years, progress has been made towards understanding how the distinct cell biological processes that together drive apical constriction are coordinated. These processes include the contraction of actin-myosin networks, which generates force, and the attachment of actin networks to cell-cell junctions, which allows forces to be transmitted between cells. Different cell types regulate contractility and adhesion in unique ways, resulting in apical constriction with varying dynamics and subcellular organizations, as well as a variety of resulting tissue shape changes. Understanding both the common themes and the variations in apical constriction mechanisms promises to provide insight into the mechanics that underlie tissue morphogenesis.

  4. Chimaerin suppresses Rac1 activation at the apical membrane to maintain the cyst structure.

    Directory of Open Access Journals (Sweden)

    Shunsuke Yagi

    Full Text Available Epithelial organs are made of a well-polarized monolayer of epithelial cells, and their morphology is maintained strictly for their proper functions. Previously, we showed that Rac1 activation is suppressed at the apical membrane in the mature organoid, and that such spatially biased Rac1 activity is required for the polarity maintenance. Here we identify Chimaerin, a GTPase activating protein for Rac1, as a suppressor of Rac1 activity at the apical membrane. Depletion of Chimaerin causes over-activation of Rac1 at the apical membrane in the presence of hepatocyte growth factor (HGF, followed by luminal cell accumulation. Importantly, Chimaerin depletion did not inhibit extension formation at the basal membrane. These observations suggest that Chimaerin functions as the apical-specific Rac1 GAP to maintain epithelial morphology.

  5. Endodontic management of open apex using Biodentine as a novel apical matrix

    National Research Council Canada - National Science Library

    Ambica Khetarpal; Sarika Chaudhary; Sangeeta Talwar; Mahesh Verma

    2014-01-01

      Aim: Endodontic management of open apex using Biodentine as an apical matrix. Summary : An immature tooth with pulpal necrosis and periapical pathology imposes a great difficulty to the endodontist...

  6. Recycling endosomes in apical plasma membrane domain formation and epithelial cell polarity

    NARCIS (Netherlands)

    Golachowska, Magdalena R.; Hoekstra, Dick; van IJzendoorn, Sven C. D.

    2010-01-01

    Recycling endosomes have taken central stage in the intracellular sorting and polarized trafficking of apical and basolateral plasma membrane components. Molecular players in the underlying mechanisms are now emerging, including small GTPases, class V myosins and adaptor proteins. In particular,

  7. Magnetic Resonance Imaging of Transient Left Ventricular Apical Ballooning Related to Emotional Stress: a Case Report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Mu Sook; Choi, Byoung Wook; Choe, Kyu Ok; Chung, Namsik [Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2007-02-15

    Transient left ventricular apical ballooning is characterized by transient wall motion abnormalities involving the left ventricular apex and mid-ventricle in the absence of coronary arterial occlusion. A 66-year-old woman presented to the emergency department with chest pain that mimicked acute myocardial infarction. An aortogram showed akinesis from the mid to apical left ventricle with sparing of the basal segments. Four days later, she underwent MRI, which demonstrated characteristic apical contractile dysfunction, the same as the aortogram, without evidence of myocardial infarction on the MRI. Two weeks later, her symptoms were resolved and follow-up echocardiography showed normal ventricular function. We suggest that MRI might be an integrated imaging diagnostic tool for the diagnosis of this syndrome, which demonstrated characteristic apical contractile dysfunction with performing cine MRI, the absence of significant coronary artery stenosis with performing coronary MR angiography and the absence of myocardial infarction with performing contrast enhanced delayed MRI.

  8. Isolated left ventricular apical hypoplasia with infundibular pulmonary and aortic stenosis: A rare combination

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Jin Il; Jeong, Yeon Joo; Lee, Gee Won; Choi, Jung Hyun; Lee, Ji Won [Medical Research Institute, Pusan National University Hospital, Busan (Korea, Republic of)

    2013-12-15

    Isolated left ventricular (LV) apical hypoplasia is a rare congenital cardiac anomaly which is not accompanied by other cardiac abnormalities, with the exception of two cases. We report a case of a 33-year-old male patient with isolated LV apical hypoplasia combined with infundibular pulmonary stenosis and aortic stenosis. We review a literature focusing on the characteristic magnetic resonance features and combined cardiac abnormalities.

  9. Rho/Rho-associated Kinase-II Signaling Mediates Disassembly of Epithelial Apical Junctions

    OpenAIRE

    2007-01-01

    Apical junctional complex (AJC) plays a vital role in regulation of epithelial barrier function. Disassembly of the AJC is observed in diverse physiological and pathological states; however, mechanisms governing this process are not well understood. We previously reported that the AJC disassembly is driven by the formation of apical contractile acto-myosin rings. In the present study, we analyzed the signaling pathways regulating acto-myosin–dependent disruption of AJC by using a model of ext...

  10. Descriptive study of apical periodontitis detected in Cone Beam Computed Tomography scans

    OpenAIRE

    MORETI,Lucieni Cristina Trovati; PANZARELLA,Francine Kühl; OLIVEIRA,Marine de; José Luiz Cintra JUNQUEIRA; MANHÃES JÚNIOR,Luiz Roberto

    2016-01-01

    ABSTRACT Objective: To perform a descriptive study in order to evaluate apical periodontitis in endodontically treated teeth using cone beam computed tomography. Methods: Eighty-six exams presenting at least one apical periodontitis were selected and divided into two groups: 1 for the mandible and 2 for the maxilla. All the exams were done using the same cone beam computed tomography with standard acquisition settings. All the images were processed and manipulated using the same software. T...

  11. Effect of needle insertion depth and apical diameter on irrigant extrusion in simulated immature permanent teeth

    Directory of Open Access Journals (Sweden)

    AKSEL Hacer

    2014-09-01

    Full Text Available The aim of this study was to compare the amount of irrigant extrusion in simulated immature permanent teeth when the apical diameter and needle insertion depth were varied. Thirty single-rooted maxillary incisors with straight root canals were selected. The root length was standardized to a length of 9 mm. The teeth were divided into two experimental groups according to the degree of apical enlargement (n = 15. The apices were enlarged to a diameter of 1.10 mm or 1.70 mm by using a #3 or #6 peeso reamer, respectively, to simulate immature teeth. The irrigation solution was applied 2 or 4 mm short of the working length (WL in each experimental group. The glass vial model was used for the collection of extruded irrigant beyond the root apex. A two-way repeated measures analysis of variance test showed that there was no significant difference between different needle insertion depths (2 and 4 mm short of the WL in the group with an apical diameter of 1.70 mm (p > 0.05. In the group with an apical diameter of 1.10 mm, a 32% increase in irrigant extrusion was observed when the needle was positioned at 2 mm (p < 0.05. Regarding the effect of apical diameter, the group with a diameter of 1.70 mm showed more apical extrusion of the irrigant (34% increase for the needle positioned at 2 mm and 68% increase for the needle positioned at 4 mm. It was observed that the needle insertion depth and apical diameter have a significant effect on irrigant extrusion in immature permanent teeth.

  12. Cochlear outer hair cells undergo an apical circumference remodeling constrained by the hair bundle shape.

    Science.gov (United States)

    Etournay, Raphaël; Lepelletier, Léa; Boutet de Monvel, Jacques; Michel, Vincent; Cayet, Nadège; Leibovici, Michel; Weil, Dominique; Foucher, Isabelle; Hardelin, Jean-Pierre; Petit, Christine

    2010-04-01

    Epithelial cells acquire diverse shapes relating to their different functions. This is particularly relevant for the cochlear outer hair cells (OHCs), whose apical and basolateral shapes accommodate the functioning of these cells as mechano-electrical and electromechanical transducers, respectively. We uncovered a circumferential shape transition of the apical junctional complex (AJC) of OHCs, which occurs during the early postnatal period in the mouse, prior to hearing onset. Geometric analysis of the OHC apical circumference using immunostaining of the AJC protein ZO1 and Fourier-interpolated contour detection characterizes this transition as a switch from a rounded-hexagon to a non-convex circumference delineating two lateral lobes at the neural side of the cell, with a negative curvature in between. This shape tightly correlates with the 'V'-configuration of the OHC hair bundle, the apical mechanosensitive organelle that converts sound-evoked vibrations into variations in cell membrane potential. The OHC apical circumference remodeling failed or was incomplete in all the mouse mutants affected in hair bundle morphogenesis that we tested. During the normal shape transition, myosin VIIa and myosin II (A and B isoforms) displayed polarized redistributions into and out of the developing lobes, respectively, while Shroom2 and F-actin transiently accumulated in the lobes. Defects in these redistributions were observed in the mutants, paralleling their apical circumference abnormalities. Our results point to a pivotal role for actomyosin cytoskeleton tensions in the reshaping of the OHC apical circumference. We propose that this remodeling contributes to optimize the mechanical coupling between the basal and apical poles of mature OHCs.

  13. The dynamics of soybean leaf and shoot apical meristem transcriptome undergoing floral initiation process.

    Science.gov (United States)

    Wong, Chui E; Singh, Mohan B; Bhalla, Prem L

    2013-01-01

    Flowering process governs seed set and thus affects agricultural productivity. Soybean, a major legume crop, requires short-day photoperiod conditions for flowering. While leaf-derived signal(s) are essential for the photoperiod-induced floral initiation process at the shoot apical meristem, molecular events associated with early floral transition stages in either leaves or shoot apical meristems are not well understood. To provide novel insights into the molecular basis of floral initiation, RNA-Seq was used to characterize the soybean transcriptome of leaf and micro-dissected shoot apical meristem at different time points after short-day treatment. Shoot apical meristem expressed a higher number of transcripts in comparison to that of leaf highlighting greater diversity and abundance of transcripts expressed in the shoot apical meristem. A total of 2951 shoot apical meristem and 13,609 leaf sequences with significant profile changes during the time course examined were identified. Most changes in mRNA level occurred after 1short-day treatment. Transcripts involved in mediating responses to stimulus including hormones or in various metabolic processes represent the top enriched GO functional category for the SAM and leaf dataset, respectively. Transcripts associated with protein degradation were also significantly changing in leaf and SAM implicating their involvement in triggering the developmental switch. RNA-Seq analysis of shoot apical meristem and leaf from soybean undergoing floral transition reveal major reprogramming events in leaves and the SAM that point toward hormones gibberellins (GA) and cytokinin as key regulators in the production of systemic flowering signal(s) in leaves. These hormones may form part of the systemic signals in addition to the established florigen, FLOWERING LOCUS T (FT). Further, evidence is emerging that the conversion of shoot apical meristem to inflorescence meristem is linked with the interplay of auxin, cytokinin and GA

  14. The dynamics of soybean leaf and shoot apical meristem transcriptome undergoing floral initiation process.

    Directory of Open Access Journals (Sweden)

    Chui E Wong

    Full Text Available Flowering process governs seed set and thus affects agricultural productivity. Soybean, a major legume crop, requires short-day photoperiod conditions for flowering. While leaf-derived signal(s are essential for the photoperiod-induced floral initiation process at the shoot apical meristem, molecular events associated with early floral transition stages in either leaves or shoot apical meristems are not well understood. To provide novel insights into the molecular basis of floral initiation, RNA-Seq was used to characterize the soybean transcriptome of leaf and micro-dissected shoot apical meristem at different time points after short-day treatment. Shoot apical meristem expressed a higher number of transcripts in comparison to that of leaf highlighting greater diversity and abundance of transcripts expressed in the shoot apical meristem. A total of 2951 shoot apical meristem and 13,609 leaf sequences with significant profile changes during the time course examined were identified. Most changes in mRNA level occurred after 1short-day treatment. Transcripts involved in mediating responses to stimulus including hormones or in various metabolic processes represent the top enriched GO functional category for the SAM and leaf dataset, respectively. Transcripts associated with protein degradation were also significantly changing in leaf and SAM implicating their involvement in triggering the developmental switch. RNA-Seq analysis of shoot apical meristem and leaf from soybean undergoing floral transition reveal major reprogramming events in leaves and the SAM that point toward hormones gibberellins (GA and cytokinin as key regulators in the production of systemic flowering signal(s in leaves. These hormones may form part of the systemic signals in addition to the established florigen, FLOWERING LOCUS T (FT. Further, evidence is emerging that the conversion of shoot apical meristem to inflorescence meristem is linked with the interplay of auxin

  15. Frecuencia de periodontitis apical en tratamientos endodónticos de pregrado Frequency of apical periodontitis in endodontic treatment in undergraduate

    Directory of Open Access Journals (Sweden)

    P León

    2011-12-01

    Full Text Available La periodontitis apical es una enfermedad de los tejidos periapicales de etiología bacteriana. Su tratamiento requiere erradicar los microorganismos del conducto radicular y obturarlo para lograr la reparación posterior. El objetivo de éste trabajo fue determinar la frecuencia de periodontitis apical en la población que asiste a la clínica de Endodoncia de la Facultad de Odontología de la Universidad de Chile y su relación con diferentes variables: diagnóstico específico, edad, sexo, agudas vs. crónicas, éxito/fracaso del tratamiento y rehabilitación post-tratamiento. Se recolectó información de 292 dientes de pacientes tratados en dicha clínica, analizándose la información de aquellos con dientes diagnosticados con algún tipo de periodontitis apical clasificándolo según la nueva nomenclatura de la asociación de endodoncia americana. La frecuencia de periodontitis apical fue de un 36.7% (92 pacientes, de los cuales un 77.8% presentaron patologías de tipo crónicas. Un 75% de los pacientes pertenecieron al sexo femenino y la 5ta década representó un 34.8% de los pacientes. El 100% de los pacientes que acudieron a control presentó éxito en sus tratamientos según variables clínico-radiográficas, mientras que la restauración más frecuente post-tratamiento fue la resina compuesta (52.4%. Dado el pequeño número de pacientes que concurrieron a la citación de control para determinar el éxito del tratamiento, esta variable debe ser considerada como preliminar. Nuestros resultados mostraron que la condición mas frecuente fue la periodontitis apical de tipo crónica, afectando más a mujeres y a la 5ta década.Apical periodontitis is a microbially induced inflammatory disease of the periapical tissues. Its treatment requires eliminating microorganism from root canal and sealing it properly to induce further tissue repair. The aim of this study was to determine the frequency of apical periodontitis and its distribution by

  16. "Greening" a Familiar General Chemistry Experiment: Coffee Cup Calorimetry to Determine the Enthalpy of Neutralization of an Acid-Base Reaction and the Specific Heat Capacity of Metals

    Science.gov (United States)

    Bopegedera, A. M. R. P.; Perera, K. Nishanthi R.

    2017-01-01

    Coffee cup calorimetry, performed with calorimeters made with styrofoam coffee cups, is a familiar experiment in the general chemistry laboratory. These calorimeters are inexpensive, easy to use, and provide good insulation for most thermodynamics experiments. This paper presents the successful substitution of paper coffee cups for styrofoam cups…

  17. 77 FR 60897 - Safety Zone: America's Cup World Series Finish-Line, San Francisco, CA

    Science.gov (United States)

    2012-10-05

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone: America's Cup World Series Finish-Line, San... race finishes that will occur in vicinity of San Francisco West Yacht Harbor Light 2. Unauthorized... to finish the races in the subject location on September 18, 2012, and the event would occur before...

  18. In situ sampling of small volumes of soil solution using modified micro-suction cups

    NARCIS (Netherlands)

    Shen, Jianbo; Hoffland, E.

    2007-01-01

    Two modified designs of micro-pore-water samplers were tested for their capacity to collect unbiased soil solution samples containing zinc and citrate. The samplers had either ceramic or polyethersulfone (PES) suction cups. Laboratory tests of the micro-samplers were conducted using (a) standard sol

  19. Cupping Therapy for 103 Cases of High Fever due to Infection of the Upper Respiratory Tract

    Institute of Scientific and Technical Information of China (English)

    刘颖东

    2002-01-01

    @@ The cupping therapy has remarkable antipyretic effect in the treatment of fever. In recent years, the author has treated 103 cases of high fever caused by infection of the upper respiratory tract and obtained quite satisfactory therapeutic results. A report follows.

  20. Spinal Epidural Hematoma Following Cupping Glass Treatment in an Infant With Hemophilia A.

    Science.gov (United States)

    Fruchtman, Yariv; Dardik, Rima; Barg, Assaf Arie; Livnat, Tami; Feldman, Zeev; Rubinstein, Marina; Grinberg, Gahl; Rosenberg, Nurit; Kenet, Gili

    2016-06-01

    A 6 months old infant, diagnosed with a rare mutation causing severe hemophilia A, presented with spinal epidural hematoma. Parents later admitted the infant had glass cupping therapy performed within 2 weeks of the onset of symptoms. The rare mutation, rare bleeding complication, and the eventual course of therapy applied in this case will be discussed in our case report.

  1. Assessment of swallowing in preterm newborns fed by bottle and cup.

    Science.gov (United States)

    López, Claudia Peyres; Chiari, Brasília Maria; Goulart, Ana Lúcia; Furkim, Ana Maria; Guedes, Zelita Caldeira Ferreira

    2014-01-01

    To compare the swallowing performance of premature infants using a cup and a bottle during the first offer of food by mouth. This study was carried out with preterm newborns who presented low weight at birth and no neurological illnesses, genetic syndromes or congenital malformations. The newborns were assessed by videofluoroscopy while using a cup and a bottle, when they reached a post-conceptual age of ≥34 weeks, weight ≥ 1,500 g and showed signs of readiness for oral feeding. All children were fed exclusively by gavage during the period prior to the study. This study included 20 preterm newborns, with average birth weight of 1,356 g and gestational age of 31.3 weeks. The majority of the bottle-fed newborns (68%) presented strong and rhythmic suction and 63% showed good sucking/swallowing/breathing coordination. The same percentage of newborns fed by cup (68%) could not perform the sipping movement and only 32% could suck a minimal amount of liquid contrast. There were no signs of laryngeal penetration and tracheal aspiration in both procedures. At the first oral feeding, preterm newborns showed better swallowing performance with a bottle in comparison to using a cup.

  2. Corrosion Behavior of Ceramic Cup of Blast Furnace Hearth by Liquid Iron and Slag

    Science.gov (United States)

    Li, Yanglong; Cheng, Shusen; Wang, Zhifeng

    2016-10-01

    Three kinds of sample bricks of ceramic cups for blast furnace hearth were studied by dynamic corrosion tests based on different corrosion systems, i.e., liquid iron system, liquid slag system and liquid iron-slag system. Considering the influence of temperature and sample rotational speed, the corrosion profiles and mass loss of the samples were analyzed. In addition, the microstructure of the corroded samples was observed by optical microscope (OM) and scanning electron microscope (SEM). It was found that the corrosion profiles could be divided into iron corrosion region, slag corrosion region and iron-slag corrosion region via corrosion degree after iron-slag corrosion experiment. The most serious corrosion occurred in iron-slag corrosion region. This is due to Marangoni effect, which promotes a slag film formed between liquid iron and ceramic cup and results in local corrosion. The corrosion of the samples deepened with increasing temperature of liquid iron and slag from 1,623 K to 1,823 K. The variation of slag composition had greater influence on the erosion degree than that of rotational speed in this experiment. Taking these results into account the ceramic cup composition should be close to slag composition to decrease the chemical reaction. A microporous and strong material should be applied for ceramic cup.

  3. ABQ ThunderBird Cup v3.0 Alpha Worksop: Workshop Analysis 2016.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wellington K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Morris, Tyler [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chu, Andrew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gilmore, Katrina [Paine College, Augusta, GA (United States); Russ, Joshua [Voorhees College, Denmark, SC (United States); Carter, Aliyah [Norfolk State Univ., Norfolk, VA (United States)

    2016-11-01

    The ThunderBird Cup v3.0 (TBC3) program falls under the Minority Serving Institution Pipeline Program (MSIPP) that aims to establish a world-class workforce development, education and research program that combines the strengths of Historically Black Colleges and Universities (HBCUs) and national laboratories to create a K-20 pipeline of students to participate in cybersecurity and related fields.

  4. UVI ThunnderBird Cup v2.0 Workshop: Worshop Analysis 2016.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wellington K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Morris, Tyler Jake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chu, Andrew Chun-An [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russ, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Emerson-Lewis, Michelle

    2016-11-01

    The ThunderBird Cup v2.0 (TBC2) program falls under the Minority Serving Institution Pipeline Program (MSIPP) that aims to establish a world-class workforce development, education and research program that combines the strengths of Historically Black Colleges and Universities (HBCUs) and national laboratories to create a K-20 pipeline of students to participate in cybersecurity and related fields.

  5. Design optimization of cementless metal-backed cup prostheses using the concept of functionally graded material

    Energy Technology Data Exchange (ETDEWEB)

    Hedia, H S; El-Midany, T T; Shabara, M A N; Fouda, N [Production Engineering and M/C Design Department, Faculty of Engineering, Mansoura University, Mansoura (Egypt)

    2006-09-15

    Metal backing has been widely used in acetabular cup design. A stiff backing for a polyethylene liner was initially believed to be mechanically favourable. Yet, recent studies of the load transfer around acetabular cups have shown that a stiff backing causes two problems. It generates higher stress peaks around the acetabular rim than those caused by full polyethylene cups and reduces the stresses transferred to the dome of the acetabulum causing stress shielding. The aim of this study is to overcome these two problems by improving the design of cementless metal-backed acetabular cups using the two-dimensional functionally graded material (FGM) concept through finite-element analysis and optimization techniques. It is found that the optimal 2D FGM model must have three bioactive materials of hydroxyapatite, Bioglass and collagen. This optimal material reduces the stress shielding at the dome of the acetabulum by 40% and 37% compared with stainless steel and titanium metal backing shells, respectively. In addition, using the 2D FGM model reduces the maximum interface shear stress in the bone by 31% compared to the titanium metal backing shell.

  6. Football and sex: The 2006 FIFA World Cup and sex trafficking

    Directory of Open Access Journals (Sweden)

    Milivojević Sanja

    2008-01-01

    Full Text Available The staging of the 2006 Federation of International Football Association (FIFA World Cup brought together a wide ranging coalition of interests in fuelling a moral panic around sex trafficking in Europe. This coalition of diverse groups aimed to protect innocent third world women and prevent organized crime networks from luring them into the sex industry. In this article we will argue that as a result of increased attention prior to the World Cup 'protective measures' imposed by nation-states and the international community to prevent "disastrous human right abuses" (Crouse, 2006 have seriously undermined women's human rights, especially in relation to migration and mobility. We survey media sources in the lead up to the World Cup to identify the nature of the coalition seeking to protect women considered to be vulnerable to trafficking and the discourses relied upon that have served to undermine women's agency and diverse experiences of increased border and mobility controls. We conclude that measures introduced around the 2006 World Cup in relation to sex trafficking did not end with its final whistle.

  7. Cup or bottle for preterm infants: effects on oxygen saturation, weight gain, and breastfeeding.

    Science.gov (United States)

    Rocha, Neide M N; Martinez, Francisco E; Jorge, Salim M

    2002-05-01

    The impact of cup-feeding or bottle-feeding on weight gain, oxygen saturation, and breastfeeding rates of preterm infants was studied in 34 bottle-fed and 44 cup-fed preterm infants. At initiation of oral feeding, postconceptional age and weight were 37.2 +/- 2.2 weeks and 1676 +/- 83 g for the bottle-fed group (BF) and 37.0 +/- 1.6 weeks and 1637 +/- 40 g for the cup-fed (CF) group, respectively. No significant differences between groups were found with regard to time spent feeding, feeding problems, weight gain, or breastfeeding prevalence at discharge or at 3-month follow-up. Possible beneficial effects of cup-feeding were lower incidence of desaturation episodes (13.6% vs 35.3%, CF vs BF, P = .024) and a higher prevalence of breastfeeding at 3 months among those still breastfeeding at the first follow-up visit (68.4% vs 33.3%, CF vs BF, P = .04).

  8. 77 FR 14423 - Certain Food Containers, Cups, Plates, Cutlery, and Related Items, and Packaging Thereof; Notice...

    Science.gov (United States)

    2012-03-09

    ... COMMISSION Certain Food Containers, Cups, Plates, Cutlery, and Related Items, and Packaging Thereof; Notice... Related Items, and Packaging Thereof, DN 2883; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant's filing under section 210.8(b) of the...

  9. [Recommendations for Chilean travelers to the FIFA World Cup 2014 in Brazil].

    Science.gov (United States)

    Perret, Cecilia; Weitzel, Thomas

    2014-04-01

    This article provides a checklist of precautions and vaccines for Chilean travelers attending the FIFA World Cup 2014 in Brazil. It aims to help physicians to prepare visitors of this mass gathering and summarizes useful hints to avoid infectious diseases considering the circumstances and availabilities in Chile.

  10. Analytical and Experimental Studies on Critical Blank-holder Forces in Cylindrical cup deep drawing

    Institute of Scientific and Technical Information of China (English)

    Lin Zhongqin; Sun Chengzhi; Chen Guanlong; Yu Haiyan

    2004-01-01

    Based on the plastic deformation theory and energy method, the critical blank-holder forces (BHF) of wrinkling and fracture in the cylindrical cup deep-drawing are analyzed. The verify experiments were performed and compared with the theory analysis results. The predictions agree well with the experiment results. Thus, the validated presenttheoretical analysis model may be applied to determinate the suitable BHF.

  11. Joint Reinforcing-Reducing Effect of Acupuncture, Moxibustion and Cupping Therapies

    Institute of Scientific and Technical Information of China (English)

    ZHONG Lan

    2009-01-01

    @@ Based on experience in selecting points and performing manipulation according to syndromes for more than 30 years of clinical practice, the author has summarized a simple, effective and practicable method to achieve the joint reinforcing-reducing effect of acupuncture, moxibustion and cupping therapies.

  12. Service design: pre-trip planning for international visitors attending the 2010 Soccer World Cup

    CSIR Research Space (South Africa)

    Page, OA

    2008-07-01

    Full Text Available The 2010 FIFA Soccer World Cup, a multi-city event drawing visitors from around the world into the existing South-African transportation system, provides an opportunity to showcase and learn about the impact of different passenger transport service...

  13. Multiple data sets and modelling choices in a comparative LCA of disposable beverage cups

    NARCIS (Netherlands)

    Harst, van der E.J.M.; Potting, J.; Kroeze, C.

    2014-01-01

    This study used multiple data sets and modelling choices in an environmental life cycle assessment (LCA) to compare typical disposable beverage cups made from polystyrene (PS), polylactic acid (PLA; bioplastic) and paper lined with bioplastic (biopaper). Incineration and recycling were considered as

  14. Different strategies for sports injury prevention in an America's Cup yachting crew.

    Science.gov (United States)

    Hadala, Michal; Barrios, Carlos

    2009-08-01

    To analyze the effectiveness in reducing the number of sport injuries after application of different strategies of preventive physiotherapy during competition periods in an America's Cup yachting crew. A prospective physiotherapy intervention study during competition periods for three seasons was conducted on an America's Cup yachting race crew of 30 professional sailors. In the first two acts (2004), athletes did not receive any preventive physiotherapy. In the two acts celebrated in 2005, preventive intervention (phase 1) consisted of stretching exercises before the yacht race and preventative taping. During the four acts corresponding to the 2006 season, the physiotherapy program was implemented adding articular mobilization before competition, ice baths after competition, and kinesiotaping (phase 2). In the last act and the Louis Vuitton Cup (2007), a recovery program with "core stability" exercises, postcompetition stretching exercises, and 12 h of compressive clothing were added (phase 3). In the preintervention phase (2004), the rate of injured sailors/competition day was 1.66, decreasing to 0.60 in 2007 (phase 3). The number of athletes with more than one injury was significantly reduced from 53% (8 of 15) to 6.5% (2 of 12). In the preintervention period, mastmen, grinders, and bowmen showed a rate of 2.88 injuries per competition day. After phase 3, this group only suffered 0.35 injuries per competition day. The implementation of a program of preventive physiotherapy decreased the risk of injuries suffered during competition by an America's Cup yacht crew.

  15. Is Cup Positioning Challenged in Hips Previously Treated With Periacetabular Osteotomy?

    DEFF Research Database (Denmark)

    Hartig-Andreasen, Charlotte; Stilling, Maiken; Søballe, Kjeld;

    2014-01-01

    After periacetabular osteotomy (PAO), some patients develop osteoarthritis with need of a total hip arthroplasty (THA). We evaluated the outcome of THA following PAO and explored factors associated with inferior cup position and increased polyethylene wear. Follow-up were performed 4 to 10years a...

  16. Design optimization of cementless metal-backed cup prostheses using the concept of functionally graded material.

    Science.gov (United States)

    Hedia, H S; El-Midany, T T; Shabara, M A N; Fouda, N

    2006-09-01

    Metal backing has been widely used in acetabular cup design. A stiff backing for a polyethylene liner was initially believed to be mechanically favourable. Yet, recent studies of the load transfer around acetabular cups have shown that a stiff backing causes two problems. It generates higher stress peaks around the acetabular rim than those caused by full polyethylene cups and reduces the stresses transferred to the dome of the acetabulum causing stress shielding. The aim of this study is to overcome these two problems by improving the design of cementless metal-backed acetabular cups using the two-dimensional functionally graded material (FGM) concept through finite-element analysis and optimization techniques. It is found that the optimal 2D FGM model must have three bioactive materials of hydroxyapatite, Bioglass and collagen. This optimal material reduces the stress shielding at the dome of the acetabulum by 40% and 37% compared with stainless steel and titanium metal backing shells, respectively. In addition, using the 2D FGM model reduces the maximum interface shear stress in the bone by 31% compared to the titanium metal backing shell.

  17. Technical and physical analysis of the 2014 FIFA World Cup Brazil: winners vs. losers.

    Science.gov (United States)

    Rumpf, Michael C; Silva, Joao R; Hertzog, Maxime; Farooq, Abdulaziz; Nassis, George

    2017-10-01

    The purpose of the present study was to investigate the technical and physical performance parameters that distinguish between teams winning and losing matches in the 2014 FIFA World Cup Brazil. Data were derived from the FIFA website and from live-statistics provided during each game of the world cup. Twelve physical (such as total distance covered in meters (TD), TD in distinct locomotor categories: low-intensity running (LIR; 14 km/h)) and 21 technical parameters (total passes, short-, medium- and long-distance passes, total pass completion rate, dangerous attacks, attacking attempts, delivery in penalty area, ball possession, goals, goals from set-pieces, goals per shot on goal, defending saves, shots, shots on goal, shot accuracy, set-pieces, crosses, corners, clearances, yellow cards) were analyzed. Forty-two games in which a winner and consequently a loser were presented after 90 minutes of game time were investigated with independent t-tests. A binary-logistic regression was utilized to investigate whether the significant variables predicted success of the winning teams. The winning teams scored significantly (PTechnical performance related to goal scoring parameters play a decisive role in World Cup games. Furthermore, scoring efficacy from open-play as well as from set-pieces are crucial to win matches in a World Cup tournament. At this level, physical performance was not the factor to discriminate between winners and losers.

  18. Effects of turbulence and flow inclination on the performance of cup anemometers in the field

    DEFF Research Database (Denmark)

    Papadopoulos, K.H.; Stefantos, N.C.; Schmidt Paulsen, U.

    2001-01-01

    Four commercial and one research cup anemometers were comparatively tested in a complex terrain site to quantify the effects of turbulence and flow inclination on the wind speed measurements. The difference of the mean wind speed reading between the anemometers was as much as 2% for wind directio...

  19. RoboCup@Home Scientific Competition and Benchmarking for Domestic Service Robots

    NARCIS (Netherlands)

    Wisspeintner, Thomas; van der Zant, Tijn; Iocchi, Luca; Schiffer, Stefan

    2009-01-01

    Being part of the RoboCup initiative, the ROBOCUP@HOME league targets the development and deployment of autonomous service and assistive robot technology being essential for future personal domestic applications. The domain of domestic service and assistive robotics implicates a wide range of possib

  20. A Study of Mood System Analysis in A Cup of Tea

    Institute of Scientific and Technical Information of China (English)

    王梅

    2013-01-01

    Interpersonal meaning is derived from interpersonal function of language which is one component in the notion of metafunction in Hallidays”s systemic functional grammar. The present study take Katherine Mansfield”s A Cup of Tea as an ex⁃ample. Mood system is employed to analyze the subtle relationship between women and men and between women themselves.

  1. Iatrogenic artefacts attributable to traditional cupping therapy in a shotgun fatality.

    Science.gov (United States)

    Cavlak, Mehmet; Özkök, Alper; Sarı, Serhat; Dursun, Ahmet; Akar, Taner; Karapirli, Mustafa; Demirel, Birol

    2015-10-01

    Cupping is a traditional treatment method that has been used for thousands of years to diminish pain, restore appetite and improve digestion, remove tendency to faint or remove 'bad blood' from the body. The suction of the cup is created by fire or mechanical devices. This procedure may result in circular erythema, petechiae, purpura, ecchymosis, burns and may be mistaken for trauma-related ecchymosis or livor mortis. Forty-year-old male was died by shotgun injuries in the same day of the wounding. Circular ecchymoses were observed on the forehead, within the scalp of occipital region, the back of the neck, and on the back. They were defined as ecchymoses in the first examination made by a general practitioner. In the external examination during the legal autopsy superficial incisions were observed on the circular ecchymoses. The shape, localization and color of and the characteristics of incisions on the circular lesions were concluded to be caused by the dry cupping therapy and wet cupping therapy procedures. These lesions and their formation mechanisms should be well-known by the forensic medical examiners and the other medical personnel involved in the forensic medical examination.

  2. Effects of Cupping Therapy on the Pulmonary Functions in Asthmatic Children

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Barely using the cupping therapy, we treated 75asthmatic children at the stage of attack in outpatient department of our hospital from February 2001 toOctober 2002 to observe the changes of theirpulmonary functions before and after treatment. Areport follows.

  3. Simultaneous GC-MS determination of seven phthalates in total and migrated portions of paper cups.

    Science.gov (United States)

    Park, Yu Na; Choi, Min Sun; Rehman, Shaheed Ur; Gye, Myung Chan; Yoo, Hye Hyun

    2016-05-01

    Phthalate acid esters are widely used as plasticizers to impart plastic flexibility in various industrial applications. In this study, the content of seven phthalates, dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) adipate (DEHA), di-2-ethylhexyl phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP), and di-isodecyl phthalate (DIDP) were determined in paper cups using gas chromatography-mass spectrometry (GC-MS). In addition, the potential migration of these seven phthalates from paper cups into various food stimulants under different conditions was evaluated. The levels of DBP, DEHA, DEHP, and DNOP were in the ranges of 0.07-3.14, 0.16-42.69, 0.45-58.56, and 0.3-2.4 mg/kg, respectively. Meanwhile, BBP, DINP, and DIDP were not detected in most of the tested samples. In the migration test, DEHA was released to 50 % ethanol and n-heptane in a time-dependent manner and the maximum migration levels were 65.62 ± 3.61 and 95.56 ± 19.76 μg/L, respectively. The release of other phthalates was very low or negligible. These results demonstrated that paper cups are not a significant source of phthalate exposure; however, DEHA could be released from paper cups into alcoholic beverages or oily liquid beverages in the human diet.

  4. Extending virtual robots towards RoboCup Soccer Simulation and @Home

    NARCIS (Netherlands)

    van Noort, S.; Visser, A.

    2013-01-01

    The RoboCup is an initiative to promote the development of robotics in a social relevant way. The competition consists of several leagues and it would be beneficial if developments in one league could be reused in other leagues. This paper describes the development of a simulation model for a humano

  5. Taking up an event: Brand image transfer during the FIFA World Cup

    NARCIS (Netherlands)

    Neijens, P.; Smit, E.; Moorman, M.

    2009-01-01

    A real-life study (N = 1299) into brand images during and after the 2006 FIFA World Cup football tournament showed that the event was a good platform for the creation of brand images through ‘take-up’ advertising in which the brand was associated with the event. Exposure level and involvement with t

  6. Design and Implementation of a General Decision-Making Model in RoboCup Simulation

    Directory of Open Access Journals (Sweden)

    Changda Wang

    2004-09-01

    Full Text Available The study of the collaboration, coordination and negotiation among different agents in a multi-agent system (MAS has always been the most challenging yet popular in the research of distributed artificial intelligence. In this paper, we will suggest for RoboCup simulation, a typical MAS, a general decision-making model, rather than define a different algorithm for each tactic (e.g. ball handling, pass, shoot and interception, etc. in soccer games as most RoboCup simulation teams did. The general decision-making model is based on two critical factors in soccer games: the vertical distance to the goal line and the visual angle for the goalpost. We have used these two parameters to formalize the defensive and offensive decisions in RoboCup simulation and the results mentioned above had been applied in NOVAURO®, original name is UJDB, a RoboCup simulation team of Jiangsu University, whose decision-making model, compared with that of Tsinghua University, the world champion team in 2001, is a universal model and easier to be implemented.

  7. Numerical Simulation of Failure during Cylindrical CupHydrodynamic Deep Drawing

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In this paper, a method to combine the mathematical analytic equation and general FEM software has been applied in the simulation of hydrodynamic deep drawing (HDD) cylindrical cup, also the failure types such as fracture and wrinkling are studied and solved. The simulated results are coincided with experimental results.

  8. Evaluation of morphologic changes of mandibular symphysis after chin cup therapy in skeletally Cl III patients

    Directory of Open Access Journals (Sweden)

    Hosseinzadeh Nik T.

    2008-04-01

    Full Text Available Background and Aim: Chin cup is an orthopedic appliance for treating growing skeletally Cl III patients. The amount of chin forward movement in addition to morphologic changes in bony structure, determines the final profile of treated patients. The aim of this study was to evaluate the amount of morphologic changes of symphysis after chin cup therapy in skeletally Cl III patients.Materials and Methods: In this clinical trial, twenty eight cephalometries before and after chin cup therapy of 14 skeletally Cl III patients were analyzed. Landmarks introduced by Ricketts were determined to evaluate the symphysis and describe its relation to mandible. َAlso four additional measurements regarding the symphysis individually were evaluated and analyzed. Data were analyzed by paired t and pearson tests with P<0.05 as the level of significance.Results: The results showed that the height of symphysis increased after treatment (P=0.02, but its depth decreased (P=0.04. The sysmphysis turned down and back.Conclusion: These findings suggest that in Cl III malocclusions with a prognathic mandible, chin cup therapy creates changes in the horizontal dimension of symphysis morphology, which improves the Cl III profile. If the patient isn't a vertical grower, vertical changes of symphysis would be desirable. In addition, changes in the vertical dimension of the mandible (body and ramus could be observed as a backward and downward rotation.

  9. Taking up an event: Brand image transfer during the FIFA World Cup

    NARCIS (Netherlands)

    Neijens, P.; Smit, E.; Moorman, M.

    2009-01-01

    A real-life study (N = 1299) into brand images during and after the 2006 FIFA World Cup football tournament showed that the event was a good platform for the creation of brand images through ‘take-up’ advertising in which the brand was associated with the event. Exposure level and involvement with t

  10. Microstructure and mechanical properties of hypereutectic Al-Si alloy modified with Cu-P

    Institute of Scientific and Technical Information of China (English)

    ZHANG Henghua; DUAN Haiti; SHAO Guangjie; XU Luoping

    2008-01-01

    The microstructure and mechanical properties of Al-14.6Si castings modified by Cu-P master alloy under different conditions were studied with optical microscope (OM) and mechanical testing and simulation (MTS).The results indicate that the Cu-P master alloy possesses not only obvious modification effect,but also longevity effect with more than 8 h on the hypereutectic Al-Si alloy.It is shown from thermal calculation,scanning electron microscope (SEM),and energy dispersive analysis of X-rays (EDAX) that the modification mechanism of Cu-P on primary silicon in the castings is heterogeneous nucleation around AlP particles.The Cu-P master alloy has no or little modifying effect on eutectic silicon,even though it has obvious modification on primary silicon in the castings.This may be because of the fast transformation of eutectic silicon at a very narrow temperature,which will notably weaken the role of AlP particles as heterogeneous nuclei for eutectic silicon.

  11. Evaluating maps produced by urban search and rescue robots: Lessons learned from RoboCup

    NARCIS (Netherlands)

    Balaguer, B.; Balakirsky, S.; Carpin, S.; Visser, A.

    2009-01-01

    This paper presents the map evaluation methodology developed for the Virtual Robots Rescue competition held as part of RoboCup. The procedure aims to evaluate the quality of maps produced by multi-robot systems with respect to a number of factors, including usability, exploration, annotation and oth

  12. [Constructing recombinant plasmid pSH-CUP and knockout of acid trehalase gene in baker's yeast].

    Science.gov (United States)

    He, Dongqin; Xiao, Dongguang; Lv, Ye

    2008-02-01

    The ATH1 gene encoded acid trehalase in Saccharomyces cerevisiae. The gene disruption cassette combined the heterologous dominant kan(r) resistance marker with a Cre/loxP-mediated marker removal procedure. The gene disruption cassette was produced by PCR using the same long oligonucleotides comprising 50 nucleotides that annealed to sites upstream or downstream of the genomic target sequence to be deleted. After transformation of the linear disruption cassettes with a Cre/loxP-mediated marker into the cells of Saccharomyces cerevisiae BY-6, selected transformants were checked by PCR for correct the integration of the cassette and concurrent deletion of the chromosomal target sequence. The copper-resistance gene (CUP1-MT1) was cloned into pSH47, which yielded pSH-CUP. The recombinant plasmid pSH-CUP was transformed into the cells of Saccharomyces cerevisiae BY-6(delta ATH1, G418(r)), and transformants were selected for copper resistance. Upon expression of the Cre recombinase results in removal of the kan(r) gene, leaving behind a single loxP site at the chromosomal locus. Construction of the recombinant plasmid pSH-CUP avoided inserting non-yeast gene and made the loxP - kanMX - loxP gene disruption cassette more conventional for eukaryotic organism gene disruption.

  13. Pricking, Cupping and Qu Feng Tiao Ying Decoction for Treatment of Chronic Urticaria

    Institute of Scientific and Technical Information of China (English)

    刘代红

    2002-01-01

    @@ Chronic urticaria is a commonly encountered skin illness characterized by protracted course and recurrent episodes. The author had treated 26 cases of chronic urticaria by pricking, cupping and Qu Feng Tiao Ying (QFTY) decoction (祛风调营汤the Wind-dispelling and Ying system-regulating Decoction) with satisfactory results. A report is as follows.

  14. Calcium-enriched mixture cement as artificial apical barrier: A case series

    Directory of Open Access Journals (Sweden)

    Ali Nosrat

    2011-01-01

    Full Text Available In comparison to the conventional apexification using calcium hydroxide, artificial apical barrier technique is more valuable and less time consuming. This article describes successful use of calcium-enriched mixture (CEM cement as an artificial apical barrier in open apices. In this study, 13 single-rooted teeth with necrotic pulps and open apices were treated non-surgically. After copious irrigation of the root canals with NaOCl 5.25% and gentle filing, based on need for interappointment dressing, treatments were followed by CEM cement (BioniqueDent, Tehran, Iran apical plug insertion in the first or second appointment. All cases were then permanently restored. All subjects were followed until radiographic evidence of periradicular healing was seen (mean 14.5 months. Clinically, all cases were functional and asymptomatic and complete osseous healing was observed in all the teeth. Considering the biological properties of CEM cement, this new endodontic biomaterial might be appropriate to be used as artificial apical barrier in the open apex teeth.

  15. Probe tip heating assembly

    Science.gov (United States)

    Schmitz, Roger William; Oh, Yunje

    2016-10-25

    A heating assembly configured for use in mechanical testing at a scale of microns or less. The heating assembly includes a probe tip assembly configured for coupling with a transducer of the mechanical testing system. The probe tip assembly includes a probe tip heater system having a heating element, a probe tip coupled with the probe tip heater system, and a heater socket assembly. The heater socket assembly, in one example, includes a yoke and a heater interface that form a socket within the heater socket assembly. The probe tip heater system, coupled with the probe tip, is slidably received and clamped within the socket.

  16. Oscillatory behaviors and hierarchical assembly of contractile structures in intercalating cells

    Science.gov (United States)

    Fernandez-Gonzalez, Rodrigo; Zallen, Jennifer A.

    2011-08-01

    Fluctuations in the size of the apical cell surface have been associated with apical constriction and tissue invagination. However, it is currently not known if apical oscillatory behaviors are a unique property of constricting cells or if they constitute a universal feature of the force balance between cells in multicellular tissues. Here, we set out to determine whether oscillatory cell behaviors occur in parallel with cell intercalation during the morphogenetic process of axis elongation in the Drosophila embryo. We applied multi-color, time-lapse imaging of living embryos and SIESTA, an integrated tool for automated and semi-automated cell segmentation, tracking, and analysis of image sequences. Using SIESTA, we identified cycles of contraction and expansion of the apical surface in intercalating cells and characterized them at the molecular, cellular, and tissue scales. We demonstrate that apical oscillations are anisotropic, and this anisotropy depends on the presence of intact cell-cell junctions and spatial cues provided by the anterior-posterior patterning system. Oscillatory cell behaviors during axis elongation are associated with the hierarchical assembly and disassembly of contractile actomyosin structures at the medial cortex of the cell, with actin localization preceding myosin II and with the localization of both proteins preceding changes in cell shape. We discuss models to explain how the architecture of cytoskeletal networks regulates their contractile behavior and the mechanisms that give rise to oscillatory cell behaviors in intercalating cells.

  17. Stability of Commercially Available Grape and Compounded Cherry Oral Vancomycin Preparations Stored in Syringes and Cups.

    Science.gov (United States)

    Kirk, Loren; Lewis, Paul; Luu, Yao; Brown, Stacy

    2016-01-01

    The purpose of this study was to evaluate the stability of two preparations of vancomycin oral solution in two different storage containers, capped amber oral-dosing syringes and heat-sealed oral-dosing cups, stored under refrigerated conditions. Commercially available grape-flavored vancomycin oral preparation and compounded vancomycin for intravenous use in cherry syrup oral preparation were divided into 5-mL aliquots into heat-sealed plastic dosing cups and capped oral-dosing syringes. All samples were stored under refrigeration (2°C to 8°C) and evaluated at days 0, 3, 7, 14, 30, 60, and 90. For each evaluation, samples were visually inspected and analyzed for potency using a stability-indicating high-performance liquid chromatographic method with ultraviolet detection. Over the study period, at least 90% of the initial concentrations for the preparation and the product in both storage containers were retained at 60 days. The commercially available oral vancomycin further demonstrated stability within 90% out to 90 days in the syringe and the unit-dose cups. Visual inspection revealed no changes in the grape-flavored vancomycin oral preparation, but a detectable red-dye precipitate could be seen in the crevices of the dosing cups from the vancomycin in cherry syrup oral preparation after 60 days. Commercially available grape-flavored vancomycin oral preparation was stable up to 90 days, and com- pounded vancomycin for intravenous use in cherry syrup oral preparation maintained stability for 60 days when dispensed in capped amber polypropylene oral-dosing syringes and heat-sealed plastic dosing cups when stored at refrigerated conditions.

  18. Characteristics of Reversal Optic Cupping in Adults Glaucoma after Reduction of Intraocular Pressure

    Institute of Scientific and Technical Information of China (English)

    LiangXu; LeiLiu

    1995-01-01

    Purpose:According to Quigley's hypothesis the dense of connective tissue is the least and the pores of the lamina cribrosa are the largest at the superior and infe-rior poles of the lamina cribrosa,therefore they are the most vulnerable location to be involved in the characteristic glaucomatous optic nerve damage,To get clin-ical evidence for the hypltheses,the reversal of optic cup in adults glaucoma after reduction of intraocular pressure(IOP)was examined.Methods:The stereoscopic flicker comparison on with computerized image sys-tem was used to monitor the optic cup's changing,2 serial superposed stereo pairs were displayed alternatively and rapidly and the changing parts appeared moving Under the stereoscopic observation ,hthe changes of 3-dimention optic cup could be seen and the false positive phenomena caused by photographic angle variation,vascular pulsation could be differentiated from the characteristic change of the cup.Stereo fundus photographs were taken from 31eyes with hy-pertension glaucoma before and after treatment of reduction of IOPs which was either diamox administration or trabeculectomy.Results:the result showed that the reversal of optic cups after reduction of IOPs were mostly asymmetrical,especially at the inferior and/or superior poles.By multiple stepwise regression.it is known that the amount of the change is only correlated with the initial elevated IOP.Conclusions:The study indicated that it was the distortion and deformity of the lamina cribrosa leading to shearing stress that results in glaucomatous character-istic damage in structure and function.The individul tolerance of the lamina cribrosa to the high intraocular pressure and the locations of indivdual vulnerable at he optic nerve head are various.Eye Science1995;11:155-160.

  19. Joint optic disc and cup boundary extraction from monocular fundus images.

    Science.gov (United States)

    Chakravarty, Arunava; Sivaswamy, Jayanthi

    2017-08-01

    Accurate segmentation of optic disc and cup from monocular color fundus images plays a significant role in the screening and diagnosis of glaucoma. Though optic cup is characterized by the drop in depth from the disc boundary, most existing methods segment the two structures separately and rely only on color and vessel kink based cues due to the lack of explicit depth information in color fundus images. We propose a novel boundary-based Conditional Random Field formulation that extracts both the optic disc and cup boundaries in a single optimization step. In addition to the color gradients, the proposed method explicitly models the depth which is estimated from the fundus image itself using a coupled, sparse dictionary trained on a set of image-depth map (derived from Optical Coherence Tomography) pairs. The estimated depth achieved a correlation coefficient of 0.80 with respect to the ground truth. The proposed segmentation method outperformed several state-of-the-art methods on five public datasets. The average dice coefficient was in the range of 0.87-0.97 for disc segmentation across three datasets and 0.83 for cup segmentation on the DRISHTI-GS1 test set. The method achieved a good glaucoma classification performance with an average AUC of 0.85 for five fold cross-validation on RIM-ONE v2. We propose a method to jointly segment the optic disc and cup boundaries by modeling the drop in depth between the two structures. Since our method requires a single fundus image per eye during testing it can be employed in the large-scale screening of glaucoma where expensive 3D imaging is unavailable. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Effect of chin-cup treatment on the temporomandibular joint: a systematic review.

    Science.gov (United States)

    Zurfluh, Monika A; Kloukos, Dimitrios; Patcas, Raphael; Eliades, Theodore

    2015-06-01

    To systematically search the literature and assess the available evidence for the influence of chin-cup therapy on the temporomandibular joint regarding morphological adaptations and appearance of temporomandibular disorders (TMD). Electronic database searches of published and unpublished literature were performed. The following electronic databases with no language and publication date restrictions were searched: MEDLINE (via Ovid and PubMed), EMBASE (via Ovid), the Cochrane Oral Health Group's Trials Register, and CENTRAL. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. The reference lists of all eligible studies were checked for additional studies. Two review authors performed data extraction independently and in duplicate using data collection forms. Disagreements were resolved by discussion or the involvement of an arbiter. From the 209 articles identified, 55 papers were considered eligible for inclusion in the review. Following the full text reading stage, 12 studies qualified for the final review analysis. No randomized clinical trial was identified. Eight of the included studies were of prospective and four of retrospective design. All studies were assessed for their quality and graded eventually from low to medium level of evidence. Based on the reported evidence, chin-cup therapy affects the condylar growth pattern, even though two studies reported no significance changes in disc position and arthrosis configuration. Concerning the incidence of TMD, it can be concluded from the available evidence that chin-cup therapy constitutes no risk factor for TMD. Based on the available evidence, chin-cup therapy for Class III orthodontic anomaly seems to induce craniofacial adaptations. Nevertheless, there are insufficient or low-quality data in the orthodontic literature to allow the formulation of clear statements regarding the influence of chin-cup treatment on