WorldWideScience

Sample records for api x80 soldadas

  1. Estudo das tensões residuais de juntas soldadas de aço API 5L X80

    Directory of Open Access Journals (Sweden)

    Bruno Allison Araújo

    2013-09-01

    Full Text Available Este trabalho teve por objetivo determinar os níveis de tensões residuais decorrentes de processos de soldagem em juntas soldadas de um aço API 5L X80. Inicialmente foram executados os procedimentos de soldagem das juntas utilizando os processos de soldagem eletrodo revestido - Shielded Metal Arc Welding (SMAW e eletrodo de tungstênio com proteção gasosa - Gas Tungsten Arc Welding (GTAW, variando-se os consumíveis utilizados e empregando-se uma temperatura de interpasse de 175ºC, obtendo-se, desta maneira, três juntas soldadas. Foram avaliadas as regiões superiores e inferiores das juntas, determinando-se os níveis de tensões residuais transversais e longitudinais. As medidas de tensão residual foram realizadas por difratometria de raios-x através de um difratômetro portátil e respectivo software para análise dos resultados. Para a região superior das juntas soldadas, foi observado que quanto mais elevado for o aporte térmico mais compressivas foram os níveis de tensões residuais transversais, e mais deslocadas ficaram os picos de tensões trativas. Na região inferior das juntas soldadas, foi verificado que para maiores aportes térmicos, maiores foram os níveis de tensões residuais trativas na região do Metal de Solda (MS e menor foi o nível de tensões residuais trativas na Zona Termicamente Afetada (ZTA.

  2. Influencia del precalentamiento en las propiedades de uniones soldadas de acero API 5L-X80 soldadas con alambre tubular autoprotegido

    Directory of Open Access Journals (Sweden)

    Cooper, R.

    2004-08-01

    Full Text Available The present work refers to the characterization of API 5L-X80 pipeline joints welded with self-shielded flux cored wire. This process was evaluated under preheating conditions, with an uniform and steady heat input. All joints were welded in flat position (IG, with the pipe turning and the torch still. Tube dimensions were 762 mm in external diameter and 16 mm in thickness. Welds were applied on single V-groove, with six weld beads, along with three levels of preheating temperatures (room temperature, 100 °C, 160 °C. These temperatures were maintained as interpass temperature. The filler metal E71T8-K6 with mechanical properties different from parent metal was used in undermatched conditions. The weld characterization is presented according to the mechanical test results of tensile strength, hardness and impact test. The mechanical tests were conducted according to API 1104, AWS and ASTM standards. API 1104 and API 51 were used as screening criteria. According to the results obtained, it was possible to remark that it is appropriate to weld API 5L-X80 steel ducts with Self-shielded Flux Cored wires, in conformance to the API standards and no preheat temperature is necessary.

    Este trabajo presenta un estudio sobre la caracterización de las propiedades mecánicas de uniones soldadas con alambre tubular autoprotegido, de acero API 5L-X80. En este sentido, se evalúa la influencia de la temperatura de precalentamiento, manteniendo el aporte de calor uniforme. Todas las uniones soldadas se realizaron en la posición plana (IG, con la antorcha fíja y la tubería girando. Se utilizó un tubo de 762 mm de diámetro exterior y 16 mm de espesor. Las soldaduras se aplicaron sobre una unión de tope con bisel en V simple, utilizando 6 pasadas, con tres niveles de temperatura de precalentamiento (ambiente, 100 °C y 160 °C. Estas temperaturas se mantuvieron como temperatura entre pasadas. El metal de aporte, del tipo E71T8-K6, se utilizó en la

  3. Mechanical properties of API X80 steel pipe joints welded by Flux Core Arc Weld Process; Propriedades mecanicas de juntas de tubos de aco API X80 soldadas com arame tubulares

    Energy Technology Data Exchange (ETDEWEB)

    Ordonez, Robert E. Cooper; Silva, Jose Hilton F.; Trevisan, Roseana E. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Fabricacao

    2003-07-01

    Flux Core Arc Welding processes (FCAW) are beginning to be applied in pipeline welds, however, very limited experimental data regarding mechanical properties of pipeline weld joints with these processes are available in the literature. In this paper, the effects of preheat temperature and type of FCAW on mechanical properties (microhardness and tensile strength) of API X80 weld joint steel are presented. FCAW processes with gas protection and self-shielded were used. Multipasses welding were applied in 30'' diameter and 0,625'' thickness tubes. Influence factors were: FCAW type and preheat temperature. Acceptance criteria of welded joints were evaluated by API 1104 standard for tensile strength test and ASTM E384-99 for microhardness test. The results obtained showed that FCAW type and preheat temperature have no influence on mechanical properties of API X80 joint steel. (author)

  4. Effect of the welding process on the microstructure and microhardness of API 5L X80 steel welded joint used for oil transportation pipeline; Efeito do processo de soldagem sobre a microestrutura e a microdureza de juntas soldadas de aco API 5L X80 usado em tubulacoes para transporte de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Alves, R.T.P.; Albuquerque, S.F. [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Maciel, T.M.; Almeida, D.M.; Santos, M.A.

    2008-07-01

    This study had as objective to evaluate the microstructure and microhardness of API 5L X80 steel welded joints, used for pipelines to transport oil and gas, using the Shield Metal Arc Welding process with pre- heating temperature of 200 deg C and 400 deg C and the AWS E8010G electrode as filler metal. For this, besides the microhardness of the welded joint, the weld metals percentiles of micro-constituents and of columnar and regenerated grains and the medium size and extension of the heat affected zone were evaluated. The percentage of acicular ferrite in weld metal ranged from 13% to 33% which generated values of microhardness from 114 HV to 309 HV. (author)

  5. Induction bending of API 5L X80 pipes; Curvamento a quente de tubos API 5L X80

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Gilmar Z. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)]. E-mail: g.zacca@petrobras.com.br; Naschpitz, Leonardo [Primus Processamento de Tubos S.A. - PROTUBO, Campo Grande, RJ (Brazil)]. E-mail: naschpitz@protubo.com.br

    2005-07-01

    The present work is a part of an extensive program to make possible the application of API 5L X80 in pipeline construction in Brazil. At this stage, the effect of the induction bending process on the microstructure and mechanical properties of the pipe is presented. For this study an API 5L X80 pipe, made by the UOE process, is used. The pipe was manufactured from a plate produced by thermo-mechanically controlled rolling without accelerated cooling. The pipe bending was carried out applying a local induction heating following by water quenching. The bend section, outer and inner curvature regions, of the pipe bend were evaluated and compared with the original pipe. The longitudinal weld and transition zones were not evaluated at this stage. Dimensional analyses, microstructural evaluation, Charpy-V impact tests, and tensile tests were performed. A significant microstructural change was verified in the bend area. The yield strength of the pipe bend was found to be lower than original pipe and standard requirements. Other tensile properties and impact properties are compatible with API 5L X80 requirements. (author)

  6. Construction and assembly of pipelines using API 5L grade X80 tubes - considerations to be observed with high-strength steels; Construcao e montagem de dutos terrestres utilizando tubos API 5L Gr. X80

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Ailton C. de; Rabello, Jose Mauricio B. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The use of line pipes API 5L Grade X80, at the point of view of designer allows: reduction of wall thickness and pipe weight or increase of design pressure. In the pipeline construction point of view, the use of line pipes API 5L Grade X80 provide some advantages, however some difficulties must be expected in several stages of the construction and assembly. The implications in cost, productivity, inspection and integrity, with the application of these high resistance steels, complying with PETROBRAS Standard N - 464 Construcao, Montagem e Condicionamento de Dutos Terrestres (Rev. H - 2004 Dec) and the experience consolidated in pipelines construction abroad were presented. At the design stage, a comparison between pipelines designed using API 5L-X70 and API 5L-X80 was carried out approaching the aspects of variation of thickness, pressure design and design factor. An evaluation of the expected gains when choosing API 5L Grade X80 steels were done, regarding reduction of costs and pipe weight. Regarding API 5L-X80 pipe fabrication, the obtained results were reported, proving that this aspect was already overcome, showing the viability of its production in Brazil. Difficulties were detected regarding construction and assembly stage and showing the need of revision of PETROBRAS standard N-464. (author)

  7. Fragilización por Hidrógeno de los Aceros API 5L X60 y API 5L X80 Hydrogen Embrittlement of API 5L X60 and API 5L X80 Steels

    OpenAIRE

    Bruno A Araújo; Jorge A Palma; Vilar, Eudésio O.; Silva, Antonio A.

    2011-01-01

    Se ha determinado el comportamiento mecánico de los aceros API 5L grados X60 y X80, fragilizados por hidrógeno ambiental y por hidrógeno interno. El potencial y la densidad de corriente para la generación del hidrógeno fueron determinados por polarización potenciodinámica, y el tiempo de saturación estimado a partir de datos de difusividad y solubilidad obtenidos en ensayos de permeación con una célula electroquímica. La carga de hidrógeno para reproducir las condiciones de la fragilización p...

  8. Numerical evaluation of multipass welding temperature field in API 5L X80 steel welded joints

    Directory of Open Access Journals (Sweden)

    J Nóbrega

    2016-10-01

    Full Text Available Many are the metallurgical changes suffered by materials when subjected to welding thermal cycle, promoting a considerable influence on the welded structures thermo mechanical properties. In project phase, one alternative for evaluating the welding cycle variable, would be the employment of computational methods through simulation. So, this paper presents an evaluation of the temperature field in a multipass welding of API 5L X80 steel used for oil and gas transportation, using the ABAQUS ® software, based on Finite Elements Method (FEM. During the simulation complex phenomena are considerable including: Variation in physical and mechanical properties of materials as a function of temperature, welding speed and the different mechanisms of heat exchange with the environment (convection and radiation were used. These considerations allow a more robust mathematical modeling for the welding process. An analytical heat source proposed by Goldak, to model the heat input in order to characterize the multipass welding through the GTAW (Gas Tungsten Arc Welding process on root and the SMAW (Shielded Metal Arc Welding process for the filling passes were used. So, it was possible to evaluate the effect of each welding pass on the welded joint temperature field, through the temperature peaks and cooling rates values during the welding process.

  9. Avaliação da microestrutura e propriedades mecânicas de metais de solda obtidos por processos de soldagem manual e automatizado utilizado na soldagem de aço API 5L X80 Evaluation of microstructure and mechanical properties of weld metals obtained by manual and automated welding process used in the welding of API 5L X80 steel

    Directory of Open Access Journals (Sweden)

    Siderley Fernandes Albuquerque

    2011-12-01

    Full Text Available O objetivo do trabalho foi avaliar as características da zona termicamente afetada (ZTA e a microestrutura e propriedades mecânicas de metais de solda de juntas soldadas do aço API 5L X80, obtidos para quatro diferentes procedimentos de soldagem utilizando processos manuais e automatizados. Para isto, chapas do referido aço foram soldadas por processo manual ao Arco Elétrico com Eletrodo Revestido (SMAW, utilizando 473 e 673 K como temperaturas de interpasses e o eletrodo celulósico AWS E8010-G como consumível; por processo ao Arco Elétrico com Arame Tubular (FCAW robotizado, utilizando o arame AWS E71T- 1C como metal de adição e argônio com 25%CO2 como gás de proteção; por processo a Arco Elétrico com Eletrodo de Tungstênio (GTAW mecanizado na raiz da solda, usando o arame ER70S-3 e argônio como gás de proteção. As análises microestruturais foram relacionadas com os resultados de ensaios de impacto Charpy nos metais de solda e com os perfis de microdureza Vickers ao longo da junta soldada. Os resultados indicaram maiores percentuais de Ferrita Acicular e maiores valores de resistência ao impacto nos metais de solda e uma menor extensão e granulometria da ZTA, associado ao procedimento de soldagem utilizando processo automatizado com maior velocidade de soldagem.The objective of this work was to evaluate the heat affected zone characteristics and weld metals microstructure and mechanical properties of API 5L X80 steel welded joints, obtained for four different welding procedures using manual and automated processes. For this, plates of this steel were welded by manual Shielded Metal Arc Welding (SMAW process with interpasses temperatures of 473 e 673 K, and using AWS E8010-G electrode as filler metals; robotized Flux Cored Arc Welding (FCAW process, using AWS E71T-1C wire and Ar25%CO2 as consumable and mechanized Gas Tungsten Arc Welding (GTAW process, for the root pass using AWS ER70S-3 and Ar as consumable .The

  10. API 5L X80 PSL2 pipes manufactured by ERW process: TenarisConfab and USIMINAS development; Tubos API 5L X80 PSL2 processados por ERW: desenvolvimento TenarisConfab-Usiminas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Ronaldo C.; Roza, Juliana E.; Kojima, Sergio S. [TenarisConfab, Pindamonhangaba, SP (Brazil); Miranda, Lucio S.; Turani, Leonardo O. [USIMINAS, Ipatinga, MG (Brazil)

    2005-07-01

    The utilization of high strength steels can decrease, both, installation and operation costs of a new pipeline, since the increase of mechanical resistance can reduce the pipe wall thickness and, consequently, the weight of the pipe. For this purpose, the manufacture of electric resistance welding (ERW) pipes is recent, and it comes as an opportunity for gas pipelines, mainly onshore projects. As a function of their larger productivity, ERW pipes are more economically attractive than those produced by seamless and SAW processes. TenarisConfab and USIMINAS, through studies and investments in manufacturing processes, have been working to increase their skills, in order to supply ERW pipes in API 5L X80 PSL2 steel. The steel elaborated by USIMINAS is low C, high Mn, Nb, V and Ti microalloyed, and with additions of Cr and Mo, aiming to produce hot rolled coils with acicular microstructure, achieved as a combination between its chemical composition and higher cooling rates after hot rolling. The results in {phi}18''(457 mm) x 0,469''(11,91 mm) pipes are presented in this article. High toughness values reached at very low temperatures suggest that ERW API 5L X80 PSL2 pipes developed by TenarisConfab and USIMINAS may be an excellent option of choice for onshore projects that request pipes in diameters up to 20''(508 mm) and thickness up to 0,500'' (12,7 mm). (author)

  11. Development of API 5L X70 and X80 in the Brazilian Vallourec and Mannesmann Tubes industry; Desenvolvimento de acos API 5L X70 e X80 na Vallourec e Mannesmann Tubes

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Julio M. Silveira e; Carvalho, Ricardo N. de [Vallourec and Mannesmann Tubes - V e M do Brasil, Belo Horizonte, MG (Brazil)

    2000-07-01

    The demand for seamless pipes with resistance higher than those for API 5L X60 and X65 grades has increased in the last years. They are traditionally used up to now for applications on rigid risers for production and exportation and line pipes for oil and gas. In the case of seamless pipes, the great challenge is to fulfill the requirements of mechanical properties for X70 and X80 grades, quenched and tempered, with values of carbon equivalent low enough to assure a good weldability. This paper presents the results obtained by Vallourec and Mannesmann Tubes - V and M do Brazil on producing seamless pipes of X70 and X80 API grades, with outside diameter lower than 8 5/8{sup (} 219,1 mm ) and wall thickness up to 0,562{sup (} 14,3 mm ). Results of tensile, Charpy notch impact resistance and hardness tests are shown. Hydrogen-Induced and Environmental Cracking tests were also carried out, since for some applications is required a good resistance to these kinds of embrittlement mechanisms. The mechanical properties, microstructure and physical characteristics of welded joints were also evaluated. The results obtained up to now are quite promising, showing good suitability to the aimed final applications. (author)

  12. Gaseous hydrogen embrittlement of an API X80 ferrito-pearlitic steel; Fragilisation par l'hydrogene gazeux d'un acier ferrito-perlitique de grade API X80

    Energy Technology Data Exchange (ETDEWEB)

    Moro, I.

    2009-11-15

    This work deals with hydrogen embrittlement, at ambient temperature and under a high pressure gaseous way, of an API X80 high elasticity limit steel used for pipelines construction, and with the understanding of the associated physical mechanisms of the embrittlement. At first has been described a bibliographic study of the adsorption, absorption, diffusion, transport and trapping of hydrogen in the steels. Then has been carried out an experimental and numerical study concerning the implantation in the finite element code CASTEM3M of a hydrogen diffusion model coupled to mechanical fields. The hydrogen influence on the mechanical characteristics of the X80 steel, of a ferrito-pearlitic microstructure has been studied with tensile tests under 300 bar of hydrogen and at ambient temperature. The sensitivity of the X80 steel to hydrogen embrittlement has been analyzed by tensile tests at different deformation velocities and under different hydrogen pressures on axisymmetrical notched test specimens. These studies show that the effect of the hydrogen embrittlement vary effectively with the experimental conditions. Moreover, correlated with the results of the tests simulations, it has been shown too that in these experimental conditions and for that steel, the hydrogen embrittlement is induced by three different hydrogen populations: the hydrogen trapped at the ferrite/perlite interfaces, the hydrogen adsorbed on surface and the reticular hydrogen trapped in the material volume. At last, the tensile and rupture tests of specimens, during which atmosphere changes have been carried out, have shown a strong reversibility of the hydrogen embrittlement, associated with its initiation as soon as hydrogen is introduced in the atmosphere. At last, three hydrogen mechanisms, depending of the different hydrogen populations are presented and discussed. (O.M.)

  13. Evaluation of the diffusivity and susceptibility to hydrogen embrittlement of API 5L X80 steel welded joints

    Directory of Open Access Journals (Sweden)

    B Araújo

    2016-09-01

    Full Text Available This paper presents a study of susceptibility to hydrogen embrittlement of API 5L X80 steel welded joints by SMAW and GTAW processes. By varying the consumables used and the use of the same interpass temperature three different welded joints were obtained. Tests of hydrogen embrittlement susceptibility were performed according to ASTM G129-2006 with an aqueous solution (Solution A - TM0177/2005 NACE sodium thiosulfate (Na2S2O3 replacing the bubbling of H2S. From the elongation values was observed that the joint obtained in all welding conditions showed susceptibility to hydrogen embrittlement, which was determined by the elongation ratio. The joints that showed higher levels of hardness showed higher susceptibility to hydrogen embrittlement. The joints obtained with higher welding speeds for the same amount of heat input presented a reduction in the rate of hydrogen embrittlement. All joints tested in solution showed fracture surfaces with quasi cleavage zones.

  14. Cold bending of 34'' OD API 5L X80 pipes; Curvamento a frio de tubos API 5L X80 de 34'' de diametro

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Ronaldo; Moreira, Fabio A.; Chad, Luis; Fritz, Marcelo C. [TenarisConfab, Pindamonhangaba, SP (Brazil); Batista, Gilmar Z.; Hippert, Eduardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    A key factor that demands special attention in the pipeline construction is the cold bending process, since 30 to 40% of the pipes use this process in the field. This study aimed to evaluate the X80 cold bending operational parameters, in order make viable the use of this process in the installation of future onshore pipelines. Three 34''OD x 0,750'' pipes were bended. The bending was conducted using a hydraulic equipment with application of equally spaced punches, recording the correspondent angles related to the elastic and plastic deformations in order to assess the spring-back effect and performing dimensional inspection. Samples from pipe and the weld were subjected to mechanical and metallographic tests. It was possible to obtain a 19 deg curve and 27D radius without presenting any evidence of wrinkles, out of roundness or any type of mechanical damage. After analysis, all criteria established from project specifications were complied, the mechanical tests performed allowed comparing pipe mechanical properties of straight and bended regions. The results of this study provide technical know how for future X80 onshore pipelines applications. (author)

  15. Evaluation of the resistance of API 5L-X80 girth welds to sulphide stress corrosion cracking and hydrogen embrittlement

    Energy Technology Data Exchange (ETDEWEB)

    Forero, Adriana [Pontificia Universidade Catolica (PUC-Rio), Rio de Janeiro, RJ (Brazil); Ponciano, Jose A. [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao em Engenharia; Bott, Ivani de S. [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ (Brazil). Dept. de Ciencia dos Materiais e Metalurgia

    2009-07-01

    The susceptibility of pipeline steels to stress corrosion cracking (SCC) depends on a series of factors ranging from the manufacture of the steel, the pipe fabrication and the assembly of the pipeline to the type of substances to be transported. The welding procedures adopted during the production and construction of the pipelines (field welding), can modify the properties of the base metal in the heat affected zone (HAZ), potentially rendering this region susceptible to SCC. This study evaluates the resistance of girth welds, in API 5L X80 pipes, to hydrogen embrittlement and to stress corrosion cracking in the presence of sulphides. The evaluation was performed according to NACE TM0177/96, Method A, applying the criterion of fracture/no fracture, and Slow Strain Rate Tensile tests (SSRT) were undertaken using a sodium thiosulphate solution according to the ASTM G129-00 Standard. According NACE requirements, the base metal was approved. The weld metal exhibited susceptibility to SCC in the presence of sulphides, failing in a period of less than 720h. This was confirmed by SSR tensile tests, where a significant decrease in the ultimate tensile strength, the elongation and the time to fracture were observed. The mechanism of fracture was transgranular. (author)

  16. Numerical Evaluation of Temperature Field and Residual Stresses in an API 5L X80 Steel Welded Joint Using the Finite Element Method

    Directory of Open Access Journals (Sweden)

    Jailson A. Da Nóbrega

    2016-01-01

    Full Text Available Metallic materials undergo many metallurgical changes when subjected to welding thermal cycles, and these changes have a considerable influence on the thermo-mechanical properties of welded structures. One method for evaluating the welding thermal cycle variables, while still in the project phase, would be simulation using computational methods. This paper presents an evaluation of the temperature field and residual stresses in a multipass weld of API 5L X80 steel, which is extensively used in oil and gas industry, using the Finite Element Method (FEM. In the simulation, the following complex phenomena were considered: the variation in physical and mechanical properties of the material as a function of the temperature, welding speed and convection and radiation mechanisms. Additionally, in order to characterize a multipass weld using the Gas Tungsten Arc Welding process for the root pass and the Shielded Metal Arc Welding process for the filling passes, the analytical heat source proposed by Goldak and Chakravarti was used. In addition, we were able to analyze the influence of the mesh refinement in the simulation results. The findings indicated a significant variation of about 50% in the peak temperature values. Furthermore, changes were observed in terms of the level and profile of the welded joint residual stresses when more than one welding pass was considered.

  17. “Corrosión Inducida por Bacterias Sulfato Reductoras Termófilas de 60°C en la Unión Soldada del Acero API 5L- X60.”

    OpenAIRE

    Romero Romero, Justo Román

    2012-01-01

    En esta investigación se estudio el efecto de la corrosión inducida por Bacterias Sulfato Reductoras (BSR) termófilas a 60oC en el metal base (MB) y la unión soldada (US) del acero API X-60. Las bacterias sulfato reductoras fueron aisladas en el medio sólido postgate con la técnica de estriado, y fueron resembradas hasta obtener la misma morfología. El medio postgate fue seleccionado entre otros medios de cultivo, por el óptimo crecimiento que presento la BSR. Se preparar...

  18. Desenvolvimento de ensaios de corrosão-fadiga para juntas soldadas de aço API 5L X60

    OpenAIRE

    Fabrício Pinheiro dos Santos

    2006-01-01

    Este trabalho tem por objetivo desenvolver um equipamento de ensaios para avaliar a vida de juntas soldadas, provenientes de tubulações para extração de petróleo, submetidas à corrosão-fadiga. Para atingir este objetivo foi estudado em que condições de corrosãofadiga uma tubulação esta exposta em alto mar sendo então definidos os parâmetros mais relevantes para serem reproduzidos em laboratório em corpos de prova menores. Nesta etapa foram definidos quais seriam os parâmetros de ensaio que o ...

  19. Control of Microstructures and the Practical Properties of API X80 Grade Heavy-Wall High-Frequency Electric Resistance-Welded Pipe with Excellent Low-Temperature Toughness

    Science.gov (United States)

    Goto, Sota; Nakata, Hiroshi; Toyoda, Shunsuke; Okabe, Takatoshi; Inoue, Tomohiro

    2017-10-01

    This paper describes development of heavy-walled API X80 grade high-frequency electric resistance-welded (HFW) line pipes and conductor-casing pipes with wall thicknesses up to 20.6 mm. A fine bainitic-ferrite microstructure, which is preferable for low-temperature toughness, was obtained by optimizing the carbon content and applying the thermomechanical controlled hot-rolling process. As a result, the Charpy ductile-brittle transition temperature (DBTT) was well below 227 K (-46 °C) in the base metal of the HFW line pipe. When the controlled hot-rolling ratio (CR) was increased from 23 to 48 pct, the area average grain size decreased from 15 to 8 μm. The dependence of CTOD properties on CR was caused by the largest grain which is represented by the area average grain size. No texture development due to the increase of CR from 23 to 48 pct was observed. In addition, because controlled in-line heat treatment of the longitudinal weld seam also produced the fine bainitic-ferrite microstructure at the weld seam, DBTT was lower than 227 K (-46 °C) at the weld portion. The developed pipes showed good girth weldability without preheat treatment, and fracture in the tensile test initiated from the base metal in all cases.

  20. Estudio del daño por hidrógeno en uniones soldadas de un acero API 5L X52

    Directory of Open Access Journals (Sweden)

    Réquiz, R.

    2008-04-01

    Full Text Available The main objective of the present investigation was to study the susceptibility to hydrogen damage on a type API 5L X52 steel welded by electrical resistance. Several techniques, such as hydrogen permeation and cathodic charging were used. The metallic material was characterized using SEM and TEM. The base metal microstructure was very similar to that one corresponding to the welded area. This microstructure was mainly comprised by ferrite and perlite, differing only in the grain size. Therefore, the susceptibility to hydrogen damage was similar in both cases. It is worth mentioning that the welded area has very small dimensions. Indeed, the fusion zone is only 5 mm wide while the heat affected zone is 1 mm wide. The hydrogen damage observed was mainly in the form of blisters, which were associated to the presence of aluminum rich inclusions. Also, it was noticed partial inclusion dissolution and some matrix attack adjacent to the inclusions.

    En la presente investigación se estudió la susceptibilidad al daño por hidrógeno en un acero API 5L X52 soldado por resistencia eléctrica. Para ello, se emplearon técnicas de permeación y de carga catódica de hidrógeno. El material fue caracterizado mediante microscopía electrónica de barrido y de transmisión. La susceptibilidad al daño por hidrógeno fue similar tanto en el metal base como en el cordón de soldadura. Este comportamiento se vincula a la microestructura homogénea constituida por perlita y ferrita, que presentan ambos, aun cuando existen diferencias en el tamaño de grano. El cordón de soldadura tenía dimensiones muy pequeñas, donde la zona de fusión y la afectada por el calor poseen espesores de 5 mm y 1 mm, respectivamente. El daño inducido por hidrógeno se presentó en forma de ampollas en la superficie del material, asociado, principalmente, a la presencia de inclusiones globulares y semiglobulares ricas en aluminio. Además, se manifestó una disoluci

  1. APIs

    CERN Document Server

    Jacobson, Daniel; Woods, Dan

    2011-01-01

    Programmers used to be the only people excited about APIs, but now a growing number of companies see them as a hot new product channel. This concise guide describes the tremendous business potential of APIs, and demonstrates how you can use them to provide valuable services to clients, partners, or the public via the Internet. You'll learn all the steps necessary for building a cohesive API business strategy from experts in the trenches. Facebook and Twitter APIs continue to be extremely successful, and many other companies find that API demand greatly exceeds website traffic. This book offe

  2. Behavior in fatigue of longitudinal welded joints of pipeline API 5L X-70 steel at constant and variable amplitude; Comportamento em fadiga de juntas soldadas longitudinais de aco para dutos API 5L X-70 em amplitude constante e variavel

    Energy Technology Data Exchange (ETDEWEB)

    Beltrao, Marcelo A.N.; Reis, Felippe T.C.; Castrodeza, Enrique M.; Bastian, Fernando L. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2005-07-01

    The fatigue behavior of base metal, weld metal and heat affected zone of longitudinal welded joints of API 5L X-70 pipeline steel used in oil and gas transportation were studied. Fatigue tests were carried under load control for R = 0.1 and 0.5 with constant and variable amplitude, in this case with application of alternate tensile overloads (75 and 100% of maximum load) at 0,5 mm crack growth intervals. The fatigue tests results were obtained by a vs. N and da/dN vs. {delta}K curves. It can be inferred from a vs. N curves that the specimens submitted to R = 0.5 showed smaller fatigue lives than the ones under R = 0.1, with application of overloads or not. The da/dN vs. {delta}K curves exhibited the highest propagation rates for welded joints submitted to R = 0.5. The overloads promoted delay on crack growth at the three regions of the welded joints, the effect being more pronounced for R 0.1. However, for both R values, the effect of crack propagation delay with the overloads decreased with the increase of {delta}K value. (author)

  3. Mechanical Test on Irradiated Welding X80/X02 Steel

    Institute of Scientific and Technical Information of China (English)

    LIU; Xin-peng; ZHANG; Chang-yi; NING; Guang-sheng; TONG; Zhen-feng; YANG; Wen

    2015-01-01

    The dedicated X80base metal,welding metal and X80/X02HAZ metal are irradiated in experimental reactor in order to evaluate the mechanical properties on the special condition.The cumulative irradiate dose(E>1 MeV)is 4×1016 cm-2,and irradiating temperature is below

  4. Weldability and SAW welding wire of X80 pipeline steel

    Institute of Scientific and Technical Information of China (English)

    Huang Zhijun; Hu Lunji; Miao Kai; Zhang Xiaofeng; Chen Fu

    2006-01-01

    Weldability test was carried out on the newly developed fine grain, low sulphur, high strength and high toughness pipeline steel of X80 and its matching SA W wire. Test of maximum hardness in welding heat-affected zone and test of Y groove cracking show that X80 steel features low hardenability and good cracking resistance. The submerged arc welding joint made with the newly developed low carbon and multi-alloyed SA W wire of WGX2 exhibits a little higher strength than the base metal, qualified bending performance, under maximum limitation hardness and good impact toughness, which can completely meet the technical requirement of X80 steel. Despite somewhat coarsening the grain size in welding heat-affected zone is still much finer than that of traditional steels, and the microstructure in weld metal is almost full acicular ferrite. The results show that X80 steel and WGX2 wire are of great weldability.

  5. Crack control technology for the X80 large OD 1422 mm line pipes

    Directory of Open Access Journals (Sweden)

    Chunyong Huo

    2016-11-01

    Full Text Available High-grade (API 5L X80 and large-diameter (OD 1422 mm line pipes are used in the Sino–Russian eastern route gas pipeline project for high pressure (12 MPa transmission, and this can significantly increase the transmission capacity and meet China's energy strategic demand. With the increase of steel grade, transmission pressure, pipe diameter and design coefficient, however, ductile crack of line pipes becomes the dominant crack mode, so it is necessary to focus on crack arrest and control study. In this paper, therefore, an intensive study was performed on the Battelle Two-Curve (BTC method which is the major solution to the calculation of arrest toughness, as well as the crack resistance curve and decompression curve. Based on the study, the principle and application range of the BTC method were confirmed. In addition, a series of analysis were conducted on the issues which occurred when the BTC method was applied to high-strength, high-toughness line pipe steel, and the commonly used modified approaches to BTC calculation results were also provided. After the crack control scheme of the X80 large OD 1422 mm line pipes for the Russian Bovanenkovo–Ukhta was reviewed, the BTC calculation results were corrected on the basis of the design parameters of the Sino–Russian eastern routine gas pipeline project, the Charpy V-notched (CVN impact energy which meets the project requirement was finally worked out to be 245 J.

  6. X80钢焊接工艺研究%Research of X80 steel welding process

    Institute of Scientific and Technical Information of China (English)

    王新峰; 商国晟; 王楚涵; 杨梅

    2015-01-01

    针对天然气输送用管线钢从X60迅速提高到X80的现状,对Φ1 016 mm×18.4 mm的X80钢管焊接工艺进行研究.试验采用RMD下向焊工艺,填充、盖面采用全自动焊上向焊工艺,坡口采用V型,单边坡口角度22.5°~23.5°,对口间隙为2.5~4.0 mm,钝边为0.8 ~2.4 mm,焊接前将坡口内外两侧25 mm范围内清理干净,并将管端10 mm范围内的螺旋焊缝或直缝余高打磨平滑.试验结果:试样抗拉强度均超过620 MPa,冲击功平均值均大于80J,弯曲试验和刻槽锤断试验全部合格,该焊接工艺高效、优质、可行.

  7. Jobs API

    Data.gov (United States)

    General Services Administration — This Jobs API returns job openings across the federal government and includes all current openings posted on USAJobs.gov that are open to the public and located in...

  8. Helioviewer API

    Data.gov (United States)

    National Aeronautics and Space Administration — The Helioviewer Project maintains a set of Public APIs with the goal of improving access to solar and heliospheric datasets to scientists, educators, developers,...

  9. Recalls API

    Data.gov (United States)

    General Services Administration — This Recalls API allows you to tap into a list of (1) drug and food safety recalls from the Food and Drug Administration, Food Safety and Inspection Service, and...

  10. Study on dynamics behavior for X80 pipeline steel%X80管线钢的动态力学性能研究

    Institute of Scientific and Technical Information of China (English)

    李星; 曾祥国; 姚安林; 陈华燕; 刘云

    2012-01-01

    In order to investigate the dynamics behaviour of high strength pipeline steel X80, the strain waves of X80 pipeline steel under different strain rates (ε=500,1500,2500s‐1) were measured with the split Hopkinson pressure bar apparatus and was corrected with fast Fourier transform prior to obtain the stress-strain relationship. The Johnson-Cook constitutive model which widely used in finite element softwares was chosen to describe X80's dynamic mechanical properties and its parameters were fit with the experimental data. The data based on the Johnson -Cook constitutive model is in agreement with the experimental data obtained by using the split Hopkinson Pressure Bar for X80 gas pipeline steel, which provides a reference for estimating the true stress-strain relationship at higher strain rates.%为了研究高钢级管线钢X80的动态力学行为,利用分离式霍普金森压杆(简称SHPB)测量了X80钢在多种应变率(ε=500,1500,2500s-1)下的应变波形,用快速傅里叶变换对波形进行弥散修正,得到在不同应变率下的应力应变关系.基于实验获得的数据,对在有限元商业软件中广泛采用的Johnson-Cook动态强化模型进行拟合,得到X80钢在不同应变率下的Johnson-Cook本构模型的基本参数,计算结果与实验数据基本吻合.根据动态试验获得的数据而确定X80钢的动态本构关系,为研究X80钢高压埋地输气管道在各种冲击载荷作用下的动态响应提供了重要依据.

  11. Research on X80 Grade Longitudinal Submerged Arc Welded Pipe%X80钢级直缝埋弧焊管的研制

    Institute of Scientific and Technical Information of China (English)

    王利树; 刘世泽; 黄克坚

    2008-01-01

    介绍了国内某钢管公司φ914 mm×15.9 mm和φ1 219 mm×22 mm、X80钢级直缝埋弧焊钢管的试制过程,简述了其优化成型和焊接工艺,对不同厂家的钢板和试制钢管的理化性能进行了对比分析,并就所试制的X80级钢管和欧洲钢管公司同类产品实物质量进行了对比.结果表明:试制的两种规格X80级钢管完全符合标准要求,可进行批量生产.

  12. Low-hydrogen Electrode Root Welding Technology of X80 Pipeline Steel%X80管线钢低氢焊条根焊技术

    Institute of Scientific and Technical Information of China (English)

    薛慧; 孔繁荣

    2015-01-01

    目前我国大直径长输管道大部分采用X80管线钢, X80钢根焊道的焊接常采用管道全位置自动焊、 STT和RMD半自动焊、钨极氩弧焊以及焊条电弧焊等工艺。管道全位置自动焊设备昂贵、适应性差。 STT和RMD半自动焊焊接时灵活性较差,必须严格防风措施。钨极氩弧焊的抗风能力差且焊接效率太低。低氢焊条电弧焊虽操作难度大且焊接效率不高,但灵活性强、焊接接头力学性能好且设备简单,适应于返修、连头和不良地段的焊接。详细介绍了X80管线钢低氢焊条根焊焊道的焊前准备、焊接操作技术及焊接工艺参数。%At present, X80 pipeline steel mostly was used in large diameter long-distance pipeline in China. In X80 steel root welding, it usually adopts all position automatic welding, STT and RMD semi-automatic welding, tungsten argon arc welding, shielded metal arc welding, etc. The equipment of pipeline all position automatic welding is expensive, poor adaptability;windproof measures must be strictly controlled in STT and RMD semi-automatic welding;The poor ability to resist the wind for tungsten argon arc welding and its welding efficiency is too low. Although high operation difficulty and low welding efficiency for low hydrogen electrode arc welding, but it is with good flexibility and simple equipment, the mechanical properties of welded joint are good, suitable for welding repair, butt welding and welding in bad location. In this article, it detailedly introduced preparation before welding, welding technology and welding parameters for X80 pipeline steel low-hydrogen electrode root welding bead.

  13. Drug Interaction API

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Interaction API is a web service for accessing drug-drug interactions. No license is needed to use the Interaction API. Currently, the API uses DrugBank for its...

  14. Stress Corrosion Cracking Behavior of X80 Pipeline Steel in Acid Soil Environment with SRB

    Science.gov (United States)

    Wang, Dan; Xie, Fei; Wu, Ming; Liu, Guangxin; Zong, Yue; Li, Xue

    2017-06-01

    Self-designed experimental device was adopted to ensure the normal growth of sulphate-reducing bacteria (SRB) in sterile simulated Yingtan soil solution. Stress corrosion cracking (SCC) behavior of X80 pipeline steel in simulated acid soil environment was investigated by electrochemical impedance spectroscopy, slow strain rate test, and scanning electron microscope. Results show that the presence of SRB could promote stress corrosion cracking susceptibility. In a growth cycle, polarization resistance first presents a decrease and subsequently an increase, which is inversely proportional to the quantities of SRB. At 8 days of growth, SRB reach their largest quantity of 1.42 × 103 cells/g. The corrosion behavior is most serious at this time point, and the SCC mechanism is hydrogen embrittlement. In other SRB growth stages, the SCC mechanism of X80 steel is anodic dissolution. With the increasing SRB quantities, X80 steel is largely prone to SCC behavior, and the effect of hydrogen is considerably obvious.

  15. Study of an API migration for two XML APIs

    NARCIS (Netherlands)

    Bartholomei, T.T.; Czarnecki, K.; Lämmel, R.; Storm, T. van der; Brand, M.G.J. van den; Gasevic, D.; Gray, J.

    2010-01-01

    API migration refers to adapting an application such that its dependence on a given API (the source API) is eliminated in favor of depending on an alternative API (the target API) with the source and target APIs serving the same domain. One may attempt to automate API migration by code transformatio

  16. Recent X-80 Pipelines in the United States%美国近期X80强度级输送管线的发展

    Institute of Scientific and Technical Information of China (English)

    J.Malcolm Gray

    2007-01-01

    本文对在美国建设CIG(Cheyenne Plains)夏延输气管线和Kinder Morgan,Rockies Express(REX)输气管线采购所需X80强度级管线钢管的技术性能要求做了叙述.并且也介绍了CIG工程用的管线钢管的生产工艺及现场加工的工艺数据,例如,现场冷弯管,热弯管及管线钢管的环焊工艺.鉴于REX工程目前仍在施工,无法介绍其工艺详情.CIG管线工程采用铌-钼系统管线钢的螺旋焊管和新发展的铌-铬系统管线钢直缝埋弧焊管建造的.两种类型管线钢均表现了卓越的(冲击)韧性,用在超声监测下机械自动焊机成功地进行了铺设管线现场的环焊工作.X80强度级铌一铬系统高温轧制型(HTP)管线钢通过节省合金元素可以较铌-钼系统管线钢每吨节省100美元,并且还易于轧制.这两个管线工程对(延性)断裂的控制措施是在输送简单成份天然气(乾气)条件下做的.当将X80强度级管线钢用于其它高压(>72%SMYS)输送富气(CH4<90%)的管线工程时,必须重新计算分析.

  17. HTP X80管线钢的晶粒细化与组织控制%Grain Refinement and Microstructure Control of HTP X80 Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    缪成亮; 尚成嘉; 曹建平; 王学敏; 贺信莱

    2009-01-01

    通过热模拟实验研究了HTP X80管线钢的晶粒细化与组织控制的工艺要点,确定了奥氏体再结晶温度区和非再结晶温度区,揭示了高Nb含量的HTP钢在连续冷却过程中的相变特点.所得到的技术要点对细化奥氏体晶粒,避免混晶的出现,以及通过控制冷却得到理想的相变产物具有指导性.

  18. X80螺旋埋弧焊管内焊缺陷研究%Study on Inside Welding Defects of X80 SAWH Pipe

    Institute of Scientific and Technical Information of China (English)

    刘振伟; 田鹏; 王志太; 孙宏; 王慧; 王洋

    2014-01-01

    针对X80螺旋埋弧焊管焊接过程中产生的结晶裂纹,通过金相及剥离试验的方法,研究了缺陷内部不同位置的形貌特征以及裂纹的形成机理。从裂纹形成的冶金因素和成型工艺因素角度,提出了解决问题的具体工艺措施,即:调整焊垫辊至合适位置;切除卷板严重翘曲区域;减小内焊熔池金属与邻近母材区域的应力集中;采用合理的焊丝、焊剂匹配,减少焊丝、焊剂中的C, S和P含量,降低产生结晶裂纹的可能性。%According to crystalline cracks appeared in X80 SAWH pipe welding process, it studied different position morphology features inside defects and crack formation mechanism through metallographic test and peeling test. It put forward specific processing measures for solving problems, that can adjust the welding pad roller to the appropriate location;cut off serious warping area of rolled strip;reduce stress concentration in molten pool metal and near base metal area;adopt reasonable welding wire and welding flux matching, reduce the content of C, S and P to lower the possibility of generating crystal crack.

  19. Proposal of Environment for Learning using the Virtual Single Board Computer“x80

    Science.gov (United States)

    Nitta, Takayuki; Furukawa, Tatsuya; Ohchi, Masashi

    To learn the computer engineering, students used a single board computer system in the seventies. It was possible to learn how to control devices by the system. Recently, single board computers are being replaced with a CAI(Computer Assisted Instruction) system such as a PC-based assembly language programming laboratory. However, conventional CAI systems originally have not been implemented for understanding hardware technology. For the reason, we have developed the x80 that is a virtual single board computer on the X Window System. The x80 provides students with the learning environment similar to the real single board computer. The paper describes an outline of the learning style on the real and virtual single board computer.

  20. Simulation of hydrogen diffusion in welded joint of X80 pipeline steel

    Institute of Scientific and Technical Information of China (English)

    严春妍; 刘翠英; 张根元

    2014-01-01

    Hydrogen diffusion coefficients of different regions in the welded joint of X80 pipeline steel were measured using the electro-chemical permeation technique. Using ABAQUS software, hydrogen diffusion in X80 pipeline steel welded joint was studied in consideration of the inhomogeneity of the welding zone, and temperature-dependent thermo-physical and mechanical properties of the metals. A three dimensional finite element model was developed and a coupled thermo-mechanical-diffusion analysis was performed. Hydrogen concentration distribution across the welded joint was obtained. It is found that the postweld residual hydrogen exhibits a non-uniform distribution across the welded joint. A maximum equivalent stress occurs in the immediate vicinity of the weld metal. The heat affected zone has the highest hydrogen concentration level, followed by the weld zone and the base metal. Simulation results are well consistent with theoretical analysis.

  1. 提高X80管线钢RMD焊接一次合格率

    Institute of Scientific and Technical Information of China (English)

    梁兵

    2015-01-01

    随着石油天然气需求的增长及开发的进展,高强度、长距离、大口径管道已经成为输气管道的发展方向 针对高强度X80钢管道采取RMD焊接工艺和经常出现的焊接缺陷及应对措施进行了探讨.

  2. Research on Precipitate Behavior during Holding Process of X80 Pipeline Steel

    Directory of Open Access Journals (Sweden)

    Niu Tao

    2016-01-01

    Full Text Available PTT (Precipitate-Temperature-Time curve of X80 pipeline steel was obtained by strain relaxation method. The evolution of precipitate particle size during holding process was simulated combined with kinetic calculation, and observed using TEM in the samples of industrial produced X80 steel with different holding time. It is revealed that the shape of PPT curve is typical “C” type with the nose temperature of 900°C and incubation time of about 5s. Kinetic calculation results show that the average particle size increases obviously with the increment of holding time. Meantime, after holding for 90s at 950°C, observation of industrial produced X80 steel reveals that the proportion of precipitate particles larger than 60nm increases dramatically, which basically agreed with the calculation results. Dissolved Nb can effectively reduce grain boundary mobility and retard recrystallization by solute drag effect. Therefore, it is strongly recommended to shorten the holding time without increasing holding temperature in industrial production, so that to reduce precipitate of Nb at high temperature, and increase the strength and toughness of steel.

  3. Analyzing the Change-Proneness of APIs and web APIs

    NARCIS (Netherlands)

    Romano, D.

    2015-01-01

    Analyzing the Change-Proneness of APIs and web APIs APIs and web APIs are used to expose existing business logic and, hence, to ease the reuse of functionalities across multiple software systems. Software systems can use the business logic of legacy systems by binding their APIs and web APIs. With t

  4. NASA Techport API

    Data.gov (United States)

    National Aeronautics and Space Administration — The NASA TechPort system provides a RESTful web services API to make technology project data available in a machine-readable format. This API can be used to export...

  5. Healthcare Finder API

    Data.gov (United States)

    U.S. Department of Health & Human Services — All of the data used on the Finder.HealthCare.gov web application is available through this API. There are multiple collections of data available through the API. 1....

  6. Android quick APIs reference

    CERN Document Server

    Cinar, Onur

    2015-01-01

    The Android Quick APIs Reference is a condensed code and APIs reference for the new Google Android 5.0 SDK. It presents the essential Android APIs in a well-organized format that can be used as a handy reference. You won't find any technical jargon, bloated samples, drawn out history lessons, or witty stories in this book. What you will find is a software development kit and APIs reference that is concise, to the point and highly accessible. The book is packed with useful information and is a must-have for any mobile or Android app developer or programmer. In the Android Quick APIs Refe

  7. CORROSION RESISTANT CERAMIC COATING FOR X80 PIPELINE STEEL BY LOW-TEMPERATURE PACK ALUMINIZING AND OXIDATION TREATMENT

    OpenAIRE

    HUANG MIN; FU QIAN-GANG; WANG YU; ZHONG WEN-WU

    2013-01-01

    In this paper, we discuss the formation of ceramic coatings by a combined processing of low-temperature pack aluminizing and oxidation treatment on the surface of X80 pipeline steel substrates in order to improve the corrosion resistance ability of X80 pipeline steel. First, Fe-Al coating consisting of FeAl3 and Fe2Al5 was prepared by a low-temperature pack aluminizing at 803 K which was fulfilled by adding zinc in the pack powder. Pre-treatment of X80 pipeline steel was carried out through s...

  8. X80管线钢焊接缺陷分析和预防措施

    Institute of Scientific and Technical Information of China (English)

    程强

    2015-01-01

    通过结合中缅管道工程中的天然气管道、X80管线钢焊接工艺,在保山市隆阳区潞江坝段的施工实践,介绍了X80管线钢基本特性、RMD根焊参数、工艺要求、设备条件,特别是对X80管线钢焊接过程中产生缺陷的类型及原因进行了详细的分析和研究,并结合工程特点针对各种缺陷制定了明确的预防措施,提高了X80天然气管道的焊接质量。

  9. Failure Analysis of X80 Line Pipe’s Circumferential Weld

    Directory of Open Access Journals (Sweden)

    Liu Hong Liang

    2016-01-01

    Full Text Available One 530mm X80 pipeline weld failed infrequently in service process. This paper gives a systematic analysis in consideration of both material quality and loading condition. Inspection was performed on chemical composition, mechanical performance, metallograghy and micro-morphology. The result shows that weld joint’s leakage failure accident is fatigue failure. Under the effect of tensile- tensile stress fatigue stress, fatigue crack originated from weld fusion line near the pipe body and developed along the weld. Porosity defect in the weld reduced its bearing capacity, and promoted the formation and development of the fatigue crack. Fatigue strength and fatigue life of the weld has great relationship with the size and distribution of porosity. The greater the porosity, the more close to surface, the decrease of fatigue life is more obvious.

  10. Local buckling behavior of 48', X80 high-strain line pipes

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Nobuhisa; Tajika, Hisakazu; Igi, Satoshi; Okatsu, Mitsuru; Kondo, Joe; Arakawa, Takekazu [JFE Steel Corporation (Japan)

    2010-07-01

    In the natural gas sector, more and more long distance and high pressure pipelines are now constructed in challenging areas, such as seismic and Arctic regions. In order to provide safe and reliable operations, high strength, high strain and large diameter pipes are used in such projects to withstand the important strains induced by the environment. The aim of this paper is to investigate the local buckling behavior of high strength and large diameter line pipes. A bending test apparatus was developed and used to perform 2 bending tests on X80 grade, 48'' pipes pressurized to 60% SMYS and a finite element analysis (FEA) was conducted. The comparison between experimental results and simulations showed that the FEA was successful in predicting bending moment, displacement and longitudinal strain. This paper demonstrated the FEA can be used to determine the behavior of high strength, high strain and large diameter pipes.

  11. Effect of Alternating Current on the Cathodic Protection and Interface Structure of X80 Steel

    Science.gov (United States)

    Wang, Huiru; Du, Cuiwei; Liu, Zhiyong; Wang, Luntao; Ding, De

    2017-01-01

    This study employs potential-monitoring techniques, cyclic voltammetry tests, alternating current (AC) voltammetry methods, and surface characterization to investigate the AC corrosion of cathodically protected X80 pipeline steel. In a non-passive neutral solution at pH 7.2, a sufficiently negative potential completely protects steel at an AC current density of 100 A/m2. In an alkaline solution at pH 9.6, more serious AC corrosion occurs at more negative cathodic protection (CP) potential, whereas without CP the steel suffers negligible corrosion. In addition, the interface capacitance increases with AC amplitude. Based on these results, the AC corrosion mechanisms that function under various conditions are analyzed and described. PMID:28773211

  12. API Global Sourcing Strategies 2010.

    Science.gov (United States)

    Bennett, Shannon

    2010-09-01

    The API Global Sourcing Strategies 2010 Conference, held in Berlin, included topics covering new developments in the field of global sourcing of active pharmaceutical ingredients (APIs). This conference report highlights selected presentations on development in Eastern API markets, specifically India and China, factors influencing changes in global API sourcing, and risk mitigation in API sourcing.

  13. Weldability of Low Carbon and High Niobium X80 Pipeline Steel and Its Engineering Practice%低碳高铌X80管线钢焊接性及工程实践

    Institute of Scientific and Technical Information of China (English)

    尚成嘉; 王晓香; 刘清友; 付俊岩

    2012-01-01

    Low carbon high Nb and high Mn microalloying design has been applied to X80 pipeline steel , the longitudinal and submerged arc weling performance of X80 line pipe are of prime importance to application of the said alloy system. The results of thermal simulation study showed that the optimum heat input energy for alloy system X80 steel should be lower than 30 kj/cm. The grain size of CGHAZ of high Nb pipeline steel is smaller than that of common Nb steel; the coarse precipitates do not appear in ICCGHAZ, and the size of Nb(CN) is not more than 30nm. A large number of production data indicated that the mechanical properties of HAZ in high Nb X80 pipeline steel, especially the toughness, can reach high level, which can fully meet the requirements of the Second West-east Gas Pipeline Project The application of this alloy system provided the Second West-east Gas Pipeline Project with powerful safeguard.%低C高Nb高Mn的合金设计已广泛应用于X80管线钢,X80管线钢钢管的直缝焊接以及螺旋缝焊接性能对该合金体系的应用极其重要.热模拟研究结果表明,该合金体系X80管线钢的最佳热输入量应低于30 kJ/cm.相比于普通Nb含量管线钢,高Nb含量设计管线钢的粗晶区(CGHAZ)晶粒尺寸更细;临界粗晶区(ICCGHAZ)并没有粗大的析出物,Nb(CN)的尺寸≤30 nm.直缝焊及螺旋焊X80钢管的大量工业生产数据表明,高Nb X80管线钢热影响区的力学性能,特别是韧性能达到较高的水平,完全满足西气东输二线的技术指标,该合金体系的应用为西气东输二线的成功建成提供了有力保障.

  14. Fracture-Toughness Analysis in Transition-Temperature Region of Three American Petroleum Institute X70 and X80 Pipeline Steels

    Science.gov (United States)

    Shin, Sang Yong; Woo, Kuk Je; Hwang, Byoungchul; Kim, Sangho; Lee, Sunghak

    2009-04-01

    The fracture toughness in the transition-temperature region of three American Petroleum Institute (API) X70 and X80 pipeline steels was analyzed in accordance with the American Society for Testing and Materials (ASTM) E1921-05 standard test method. The elastic-plastic cleavage fracture toughness ( K Jc ) was determined by three-point bend tests, using precracked Charpy V-notch (PCVN) specimens; the measured K Jc values were then interpreted by the three-parameter Weibull distribution. The fracture-toughness test results indicated that the master curve and the 98 pct confidence curves explained the variation in the measured fracture toughness well. The reference temperatures obtained from the fracture-toughness test and index temperatures obtained from the Charpy impact test were lowest in the X70 steel rolled in the two-phase region, because this steel had smaller effective grains and the lowest volume fraction of hard phases. In this steel, few hard phases led to a higher resistance to cleavage crack initiation, and the smaller effective grain size led to a higher possibility of crack arrest, thereby resulting in the best overall fracture properties. Measured reference temperatures were then comparatively analyzed with the index temperatures obtained from the Charpy impact test, and the effects of microstructures on these temperatures were discussed.

  15. Fatigue properties of X80 pipeline steels with ferrite/bainite dual-phase microstructure

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zuo-peng [Key Lab of Metastable Materials Science & Technology and College of Materials Science & Engineering, Yanshan University, Qinhuangdao 066004 (China); Qiao, Gui-ying [Key Lab of Metastable Materials Science & Technology and College of Materials Science & Engineering, Yanshan University, Qinhuangdao 066004 (China); Key Lab of Applied Chemistry of Hebei Province and School of Environment and Chemical Engineering, Yanshan University, Qinhuangdao 066004 (China); Tang, Lei [Key Lab of Applied Chemistry of Hebei Province and School of Environment and Chemical Engineering, Yanshan University, Qinhuangdao 066004 (China); Zhu, Hong-wei; Liao, Bo [Key Lab of Metastable Materials Science & Technology and College of Materials Science & Engineering, Yanshan University, Qinhuangdao 066004 (China); Xiao, Fu-ren, E-mail: frxiao@ysu.edu.cn [Key Lab of Metastable Materials Science & Technology and College of Materials Science & Engineering, Yanshan University, Qinhuangdao 066004 (China)

    2016-03-07

    Fatigue properties are important parameters for the safety design and security evaluation of gas transmission pipelines. In this work, the fatigue life at different stresses of full-thickness X80 pipeline steel plates with a ferrite/bainite dual-phase microstructure was investigated using a MTS servo-hydraulic universal testing machine; the fatigue crack propagation rate was examined with CT specimens by using an INSTRON 8874 testing machine. Results indicate that fatigue life increases as maximum stress decreases; as the maximum stress decreases to the maximum operating stress (440 MPa), the fatigue life is approximately 4.2×10{sup 5} cycles. The fatigue crack of the full-thickness fatigue life specimens is generated at the surface of rolled steel plates and then the crack propagates and grows inward until a fracture is formed. During fatigue crack growth, a transitional turning point appears in the curve of da/dN with ΔK in the Paris region. The transitional turning point that divides the Paris region to two stages is approximately ΔK≅30 MPa m{sup 1/2}. The change in the growth rate (da/dN) is related to the variation of the crack path and in the fracture mode because of the possible microstructural sensitivity of fatigue crack propagation behavior. This study also discussed the effect of duple phase ferrite/bainite microstructure on fatigue crack initiation and propagation.

  16. Strain-Based Design Methodology of Large Diameter Grade X80 Linepipe

    Energy Technology Data Exchange (ETDEWEB)

    Lower, Mark D. [ORNL

    2014-04-01

    Continuous growth in energy demand is driving oil and natural gas production to areas that are often located far from major markets where the terrain is prone to earthquakes, landslides, and other types of ground motion. Transmission pipelines that cross this type of terrain can experience large longitudinal strains and plastic circumferential elongation as the pipeline experiences alignment changes resulting from differential ground movement. Such displacements can potentially impact pipeline safety by adversely affecting structural capacity and leak tight integrity of the linepipe steel. Planning for new long-distance transmission pipelines usually involves consideration of higher strength linepipe steels because their use allows pipeline operators to reduce the overall cost of pipeline construction and increase pipeline throughput by increasing the operating pressure. The design trend for new pipelines in areas prone to ground movement has evolved over the last 10 years from a stress-based design approach to a strain-based design (SBD) approach to further realize the cost benefits from using higher strength linepipe steels. This report presents an overview of SBD for pipelines subjected to large longitudinal strain and high internal pressure with emphasis on the tensile strain capacity of high-strength microalloyed linepipe steel. The technical basis for this report involved engineering analysis and examination of the mechanical behavior of Grade X80 linepipe steel in both the longitudinal and circumferential directions. Testing was conducted to assess effects on material processing including as-rolled, expanded, and heat treatment processing intended to simulate coating application. Elastic-plastic and low-cycle fatigue analyses were also performed with varying internal pressures. Proposed SBD models discussed in this report are based on classical plasticity theory and account for material anisotropy, triaxial strain, and microstructural damage effects

  17. Google Ajax Search API

    CERN Document Server

    Fitzgerald, Michael

    2007-01-01

    Use the Google Ajax Search API to integrateweb search, image search, localsearch, and other types of search intoyour web site by embedding a simple, dynamicsearch box to display search resultsin your own web pages using a fewlines of JavaScript. For those who do not want to write code,the search wizards and solutions builtwith the Google Ajax Search API generatecode to accomplish common taskslike adding local search results to a GoogleMaps API mashup, adding videosearch thumbnails to your web site, oradding a news reel with the latest up todate stories to your blog. More advanced users can

  18. X80高Nb管线钢组织与性能分析%Analysis on Microstructure and Mechanical Properties of High-niobium Microalloyed X80 Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    严春妍; 黄健成; 田松亚; 白世武

    2013-01-01

    总结回顾了X80高Nb管线钢的研究和发展,对其冶金设计、化学成分、显微组织结构、各项力学性能以及应力腐蚀行为、焊接性等进行了分析,并讨论了X80高Nb管线钢在应用中需要进一步研究的几个技术问题.通过低C高Nb合金化设计,可获得细小的针状铁素体组织,保证材料成分的同时具有很高的强度和良好的韧性.高温轧制技术(high temperature processing,HTP)的采用,不仅满足X80管线钢的技术条件要求,而且可以显著降低生产成本,有利于实现石油天然气更加高效经济的输送.%Research and development status of high-niobium microalloyed X80 pipeline steel were summarized and reviewed.Metallurgical design,microstructures,mechanical properties,stress corrosion behavior and field weldability were analyzed,and several applicative technological problems requiring further study and exploration were discussed.A low carbon-high niobium alloy design is used to produce a refined acicular ferrite microstructure which provides a combination of high strength and excellent toughness.The employment of high temperature processing(HTP) enables an excellent combination of key material performance characteristics satisfying relative specifications for X80 pipeline steel.Moreover,the HTP design allows for a significant reduction of total cost to realize the economical and efficient transmission of oil and gas.

  19. Estudio del desgaste de uniones soldadas en tuberías

    Directory of Open Access Journals (Sweden)

    Montero, J.

    2008-04-01

    Full Text Available This study deals with the wear experienced in the welded joins for pipelines. Its aim is to minimise the problems caused by this wear. An analysis is carried out on the tribological behaviour of three crucial areas within the welding: the basic metal, the heat-affected zone and the weld bead zone itself. The differences in mechanical properties between these areas are evaluated. Moreover, various alternatives in the welding process are proposed in an effort to improve the global behaviour of the join.

    En este trabajo se ha estudiado el desgaste que experimentan las uniones soldadas de tuberías, con el objetivo de minimizar los problemas derivados de las mismas. Se ha efectuado un análisis del comportamiento tribológico de las tres zonas fundamentales de la soldadura: metal base, zona afectada por el calor y cordón , evaluándose la diferencia en las propiedades mecánicas entre ellas. Además, se han propuesto distintas alternativas en el proceso de soldadura con la finalidad de mejorar el comportamiento global de la unión.

  20. GIBS API for Developers

    Data.gov (United States)

    National Aeronautics and Space Administration — API using Global Imagery Browse Services (GIBS) designed to deliver global, full-resolution satellite imagery to users in a highly responsive manner, enabling...

  1. Corporate Consumer Contact API

    Data.gov (United States)

    General Services Administration — The data in the Corporate Consumer Contact API is based on the content you can find in the Corporate Consumer Contact listing in the Consumer Action Handbook (PDF)....

  2. Mars Rover Photos API

    Data.gov (United States)

    National Aeronautics and Space Administration — This API is designed to collect image data gathered by NASA's Curiosity, Opportunity, and Spirit rovers on Mars and make it more easily available to other...

  3. IBM System i APIs at Work

    CERN Document Server

    Vining, Bruce; Hawkins, Ron

    2007-01-01

    This new edition of the bestselling i5 application programming interface (API) book includes powerful new APIs and updated code to give programmers a working knowledge of the APIs available under i5/OS. Using real business-world examples, this book explains APIs that serve webpages, list APIs, APIs that work with user spaces, dynamic index APIs, APIs that retrieve system values, job information and job queue information APIs, APIs that work with data queues, APIs for error handling and message handling, and spool file APIs, among many others. Completely revised and including eight new chapters

  4. Study and Practices of Low Cost in OHTP Technical of X80 Pipeline Steel%采用OHTP生产低成本X80管线钢工艺研究与实践

    Institute of Scientific and Technical Information of China (English)

    彭兆丰; 吝章国; 刘红艳; 孙洪利

    2012-01-01

    钢铁市场进入微利时代,提高企业竞争优势的出路在于科技创新、优化工艺,实现低成本生产品种钢战略。针对上述问题,邯钢结合炼钢和轧钢技术装备能力,采用了低碳、高铌以及较低的Cu、Ni、Mo成分设计,采用优化的HTP(OHTP)工艺生产出大厚壁、低成本的X80高级别管线钢。检测结果表明,采用OHTP工艺生产的X80管线钢显微组织、力学性能、-15℃落锤性能均符合国家标准和用户的要求。同时,采用OHTP轧制工艺生产的X80管线钢具有优良的低温韧性,完全满足西气东输二线项目对大壁厚X80管线钢热轧钢板的技术要求。%The steel and iron market enters the meager profit time.Improvement of competitive advantage depends on the scientific innovation and optimizing process to achieve variety steel strategy through low cost.As for the question mentioned above,combining the technical equip capacity of steelmaking and steel rolling process in Handan Iron and Steel Group,low cost X80 pipeline steel with heavy wall was produced through composition design such as low carbon,high Nb,low Cu,Ni and Mo by optimized HTP(OHTP).The test results show that microstructure,the mechanical properties,-15 ℃ drop hammer performance can reach the national standards and user's requirements.Meanwhile,the X80 pipeline steel with excellent low temperature toughness can meet the specification of heavy wall for hot rolling steel plate in natural gas transport project from west to east.

  5. Mallas electro soldadas, una alternativa para el refuerzo del hormigón y su manufactura en el Ecuador

    OpenAIRE

    Silva Salazar, Christian; Martinez Lozano, Ernesto Rolando

    2009-01-01

    En La industria de la construcción, que es una de las más importantes del país siempre se están renovando los procedimientos constructivos de manera que estos ahorren tiempo y dinero; uno de los más novedosos y que ha tenido mayor éxito en los últimos años ha sido la malla electro soldada fabricada a partir de varillas de acero trefilado. Sin embargo, para fabricar este material importante en las industrias modernas se requiere un equipo especial de soldadura de contacto Esta es una de las ...

  6. Mallas electro soldadas, una alternativa para el refuerzo del hormigón y su manufactura en el Ecuador

    OpenAIRE

    2009-01-01

    En La industria de la construcción, que es una de las más importantes del país siempre se están renovando los procedimientos constructivos de manera que estos ahorren tiempo y dinero; uno de los más novedosos y que ha tenido mayor éxito en los últimos años ha sido la malla electro soldada fabricada a partir de varillas de acero trefilado. Sin embargo, para fabricar este material importante en las industrias modernas se requiere un equipo especial de soldadura de contacto Esta es una de las ...

  7. Microbiological Corrosion Rules of X80 Pipeline Steel in Three Simulated Soil Solutions%X80管线钢在三种土壤模拟溶液中的微生物腐蚀规律

    Institute of Scientific and Technical Information of China (English)

    王丹; 谢飞; 吴明; 孙东旭; 赵启慧; 程龙生

    2016-01-01

    Immersion test for 14 days and electrochemical test were carried out in Yingtan,Shenyang and Dagang simulated soil solutions with sulfate-reducing bacteria(SRB),the microbiological corrosion rules of X80 steel in the three simulated soil solutions were studied.The results show that the corrosion rates of X80 steel in Dagang simulated soil solution was maximum,and the corrosion rate in Yingtan simulated soil solution was minimum.The combined action of SRB and Cl- promoted the formation of pits on X80 steel surface.The corrosion process of X80 steel in three simulation soil solutions was the same,the cathodic process was predominantly controlled by hydrogen reduction,the anodic dissolution generated the yellow loose corrosion products FeO(OH), and Fe2+ with SRB produced iron sulfur compounds.The hydrolysis reaction was inhibited in Yingtan soil with a lower pH.Due to the corrosion process was controlled by cathodic reduction,therefore FeS did not detect in corrosion products formed in Dagang simulated soil solution.%在含硫酸盐还原菌(SRB)的鹰潭、沈阳、大港土壤模拟溶液中进行14 d 的挂片浸泡试验和电化学试验,研究了 X80管线钢在三种土壤模拟溶液中的微生物腐蚀规律。结果表明:X80钢在大港土壤模拟溶液中的腐蚀速率最大,在鹰潭土壤模拟溶液中的最小,SRB和Cl-的共同作用可促进X80钢表面点蚀坑的形成;X80钢在上述三种土壤模拟溶液中的腐蚀过程相同,阴极过程是以氢去极化为主的控制过程,阳极过程为金属溶解,生成黄色疏松的腐蚀产物 FeO(OH),同时Fe2+与SRB结合生成铁硫化合物;鹰潭土壤的p H 较低,可抑制水解反应;在大港土壤模拟溶液中生成的腐蚀产物中未检测出FeS,这是体系中少量SRB参与氢去极化过程的结果。

  8. Electrochemical corrosion behaviour of grade X70 and X80 pipeline steels%X70和X80管线钢的电化学腐蚀行为

    Institute of Scientific and Technical Information of China (English)

    李红英; 康巍; 胡继东; 刘洋

    2011-01-01

    通过极化曲线和交流阻抗谱测试以及OM表面腐蚀形貌观察、SEM和TEM的组织观察,研究了Cl-和SO42-离子对X70和X80两种管线钢腐蚀过程的作用机理与规律。结果表明:Cl-有强穿透性,极易引起点蚀,两种钢的自腐蚀电流密度都随着Cl-浓度的增大而增大,点蚀和全面腐蚀也随之进一步加剧,X70钢在较低浓度的NaCl溶液中出现全面腐蚀和点蚀,X80钢仅在高浓度NaCl溶液中出现明显的点蚀,且在各种不同浓度溶液中腐蚀程度均没有X70钢严重。SO42-在金属表面吸附能力比Cl-强,少量SO42-在金属表面的吸附,造成Cl-的局部含量高,更易引起点蚀,而大量SO42-在金属基体表面覆盖,能阻碍Cl-的影响。X80钢比X70钢有更强的耐腐蚀性,X70钢对SO42-和Cl-的作用更为敏感。%Corrosion mechanism and corrosion process of Cl-and SO42-ions on grade X70 and X80 pipeline steels were studied by means of polarization curves,electrochemical impedance spectroscopy,OM,SEM and TEM.The results show that Cl-has a strong penetrability,leading to pitting corrosion.The corrosion current density of the steels increases and pitting and general corrosion is aggravated with the increase of Cl-concentration in the solution.Pitting and general corrosion of X70 steel occurs in the NaCl solution of low concentration and only obvious pitting corrosion of X80 steel in the NaCl solution of high-concentration is observed and corrosion degree of X80 steel is less than that of X70 steel in same concentration solution.The adsorption ability of SO42-on the surface of metal is stronger than Cl-,a small amount of SO42-that adsorbs on the surface of metal to cause higher local content of Cl-causes more pitting,however a large amount of SO42-can cover on the surface of metal to hinder the influence of Cl-.X70 steel is more sensitive to the effect of SO42-and Cl-compared with X80 steel,and X80 steel exhibits higher corrosion resistance than X70 steel.

  9. HTP工艺试制高铌X80管线钢的组织性能研究%Research on Microstructure and Properties of High Nb X80 Pipeline Steel Trial-produced by HTP Technology

    Institute of Scientific and Technical Information of China (English)

    黄一新

    2007-01-01

    对南钢试制的低碳、高铌、不添加钼成分的高温轧制(HTP)的X80管线钢钢板的性能进行了分析,针对其显微组织特点进行了详细的观察和研究,并对DWTT断口形貌、夹杂物以及第二相粒子的成分、尺寸及分布进行了分析,证实了采用HTP工艺技术生产的管线钢板完全能够达到X80的现行技术标准要求.

  10. Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion

    Institute of Scientific and Technical Information of China (English)

    De-jun Kong; Cun-dong Ye

    2014-01-01

    The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment (LHT) on H2S stress corrosion in the National Association of Corrosion Engineers (NACE) solution were analyzed by a slow strain rate test. The frac-ture morphologies and chemical components of corrosive products before and after LHT were analyzed by scanning electron microscopy and energy-dispersive spectroscopy, respectively, and the mechanism of LHT on stress corrosion cracking was discussed. Results showed that the fracture for welded joints was brittle in its original state, while it was transformed to a ductile fracture after LHT. The tendencies of hydro-gen-induced corrosion were reduced, and the stress corrosion sensitivity index decreased from 35.2%to 25.3%, indicating that the stress corrosion resistance of X80 pipeline steel welded joints has been improved by LHT.

  11. Microstructure and mechanical properties of hard zone in friction stir welded X80 pipeline steel relative to different heat input

    Energy Technology Data Exchange (ETDEWEB)

    Aydin, Hakan, E-mail: hakanay@uludag.edu.tr [Engineering and Architecture Faculty, Mechanical Engineering Department, Uludag University, 16059 Gorukle-Bursa (Turkey); Nelson, Tracy W. [Mechanical Engineering Department, Brigham Young University, 435 CTB, Provo, UT 84602 (United States)

    2013-12-01

    The study was conducted to investigate the microstructure and mechanical properties of the hard zone in friction stir welded X80 pipeline steel at different heat inputs. Microstructural analysis of the welds was carried out using optical microscopy, transmission electron microscopy, and microhardness. Heat input during friction stir welding process had a significant influence on the microstructure and mechanical properties in the hard zone along the advancing side of the weld nugget. Based on the results, the linear relationships between heat input and post-weld microstructures and mechanical properties in the hard zone of friction stir welded X80 steels were established. It can be concluded that with decrease in heat input the bainitic structure in the hard zone becomes finer and so hard zone strength increases.

  12. Corrosion Behavior of X80 Steel with Coupled Coating Defects under Alternating Current Interference in Alkaline Environment

    Science.gov (United States)

    Li, Zhong; Li, Caiyu; Qian, Hongchang; Li, Jun; Huang, Liang; Du, Cuiwei

    2017-01-01

    The corrosion behavior of X80 steel in the presence of coupled coating defects was simulated and studied under the interference of alternating current (AC) in an alkaline environment. The results from electrochemical measurements showed that the electrode potential of the coating defect with the smaller exposed area was lower than that with the larger area, which indicated that the steel with the smaller coating defect was more prone to corrosion. The result of weight loss tests also showed that the smaller coating defect had induced a higher corrosion rate. However, the corrosion rate of X80 steel at the larger coating defect decreased gradually with the increase of the larger defect area at a constant smaller defect area. The corrosion morphology images showed that the coating defects with smaller areas suffered from more severe pitting corrosion. PMID:28773078

  13. Effect of CO2 partial pressure on SCC behavior of welded X80 pipeline in simulated soil solution

    Institute of Scientific and Technical Information of China (English)

    Ming WU; Xu CHEN; Chuan HE; Jun XIAO

    2011-01-01

    The stress corrosion cracking (SCC) behavior of welded X80 pipeline steel in simulated Ku'erle soil solution was studied by means of electrochemical impedance spectroscopy (EIS) and slow strain rate tests (SSRT). The microstructure of the welded steel was observed by optical microscopy (OM). It is demonstrated that the microstructure of the weld metal consists of acicular ferrite and grain boundary ferrite,while that of heat affected zone (HAZ) is a mixture of acicular ferrite and bainitic ferrite microconstituents. The microstructure of the base steel is composed of ferrite and pearlite.The anodic dissolution of X80 pipeline steel in simulated Ku'erle soil solution could be enhanced and the SCC sensitivity increased with the increase of CO2 partial pressure. The SCC mechanism of X80 pipeline is a mixing mechanism of hydrogen embrittlement combined with anodic dissolution,and the hydrogen embrittlement plays a leading role. The higher SCC sensitivity of the weld metal was attributed to the metallurgical transformation,local hardening and residual stress.

  14. Contracting the Facebook API

    CERN Document Server

    Rubinger, Ben; 10.4204/EPTCS.35.6

    2010-01-01

    In recent years, there has been an explosive growth in the popularity of online social networks such as Facebook. In a new twist, third party developers are now able to create their own web applications which plug into Facebook and work with Facebook's "social" data, enabling the entire Facebook user base of more than 400 million active users to use such applications. These client applications can contain subtle errors that can be hard to debug if they misuse the Facebook API. In this paper we present an experience report on applying Microsoft's new code contract system for the .NET framework to the Facebook API.We wrote contracts for several classes in the Facebook API wrapper which allows Microsoft .NET developers to implement Facebook applications. We evaluated the usefulness of these contracts during implementation of a new Facebook application. Our experience indicates that having code contracts provides a better and quicker software development experience.

  15. Contracting the Facebook API

    Directory of Open Access Journals (Sweden)

    Ben Rubinger

    2010-09-01

    Full Text Available In recent years, there has been an explosive growth in the popularity of online social networks such as Facebook. In a new twist, third party developers are now able to create their own web applications which plug into Facebook and work with Facebook's "social" data, enabling the entire Facebook user base of more than 400 million active users to use such applications. These client applications can contain subtle errors that can be hard to debug if they misuse the Facebook API. In this paper we present an experience report on applying Microsoft's new code contract system for the .NET framework to the Facebook API.We wrote contracts for several classes in the Facebook API wrapper which allows Microsoft .NET developers to implement Facebook applications. We evaluated the usefulness of these contracts during implementation of a new Facebook application. Our experience indicates that having code contracts provides a better and quicker software development experience.

  16. Efecto de las tensiones en la unión soldada tubo-brida del transportador de mineral reducido

    Directory of Open Access Journals (Sweden)

    Marjoris Utria-Jimenez

    2016-03-01

    Full Text Available Este trabajo tuvo como objetivo determinar mediante el cálculo y simulación de tensiones, el efecto de estas en la aparición de roturas en la unión soldada del tubo con la brida en tramos rectos del transportador de mineral laterítico reducido de una planta metalúrgica. La simulación se realizó por el método de elementos finitos. El análisis metalográficoevidenció que la unión soldada presenta estructuras ferrito–perlítica y de Widmanstaetten incompleta, lo cual está motivado por la diferencia de carbono que existe entre la brida y el tubo. Se concluye que las tensiones de la soldadura no inducen la aparición de las fallas; según criterio de Von Misses la unión resiste las condiciones de carga ya que las tensiones máximas generadas por la soldadura del cordón se distribuyen a lo largo del mismo sin sobrepasar los valores peligrosos.

  17. Caracterización microestructural de uniones soldadas de acero AISI 316L en tuberías

    Directory of Open Access Journals (Sweden)

    Tomás H. Fernández-Columbié

    2016-03-01

    Full Text Available Se analizó el comportamiento microestructural de uniones soldadas de acero AISI 316L empleado en la fabricación de tuberías, las cuales se ven afectadas por agrietamiento en el cordón de soldadura. Se emplearon electrodos revestidos de acero inoxidables de los tipos E 309–16; 310–16 y E 316L–16, según norma de la AWS, los que fueron evaluados por su depósito en uniones a tope preparadas con biseles en V, soldadas por un solo lado del material de la tubería, así como la selección y preparación de muestra en zonas donde la tubería presenta daños mecánicos, fisuras y corrosión severa con pérdida del espesor de pared crítica para soportar las presiones de trabajo. Se caracterizó la microestructura de la zona fundida y la zona de influencia térmica de cada cordón luego de realizado el proceso de soldadura. Se concluye que la soldadura con electrodos del tipo E 309-16 y del tipo E 316-16 no son recomendables debido a que se obtiene una microestructura sensible al agrietamiento.

  18. Data.gov CKAN API

    Data.gov (United States)

    General Services Administration — The data.gov catalog is powered by CKAN, a powerful open source data platform that includes a robust API. Please be aware that data.gov and the data.gov CKAN API...

  19. Mars Atmospheric Aggregation System API

    Data.gov (United States)

    National Aeronautics and Space Administration — The {MAAS} API is an open source REST API built to help make it easier and more efficient to build interactive applications that want to utilize the wealth of...

  20. Longitudinal Strain Capacity of GMAW Welded High Niobium (HTP) Grade X80 Steel Pipes%GMAW焊接的HTP高铌X80管线钢管的纵向应变容量

    Institute of Scientific and Technical Information of China (English)

    马小芳

    2013-01-01

    对低C高Nb微合金化的HTP工艺X80管线钢管GMAW焊接纵向环焊缝力学性能和断裂性能做了定量分析,试验使用X80级1219 mm×22 mm UOE直缝埋弧焊管,在弯曲宽板试样的焊接中心线和HAZ表面开缺口试验,对母材和焊缝的拉伸性能、屈服强度过匹配、 V形缺口夏比冲击韧性、 CTOD韧性、宽板拉伸试验结果进行了分析。结果表明,-20℃下,高Nb HTP管线钢管可以达到很大的纵向后屈服应变,同时证明了8%的过匹配是比较合理的要求。%This paper presents the results of an experimental study aimed at quantifying the mechanical and fracture properties of GMAW girth welds in an HTP low carbon high Nb micro-alloyed,1 219 mm by 22 mm wall longitudinal welded Grade X80 steel pipes. The weld centerline and HAZ surface notched curved wide plate tensile tests have demonstrated that overmatched girth welds in high Nb HTP steel pipes can accommodate significant longitudinal post yield strains at -20 ℃. It was also demonstrated that a minimum yield strength overmatch of 8%can be used as a rational requirement.

  1. Efecto del procedimiento de soldadura sobre las propiedades de uniones soldadas de aceros microaleados para cañería Welding procedure effect on the properties of microalloyed steel welded joints for metal fabrication

    Directory of Open Access Journals (Sweden)

    Mónica Zalazar

    2009-03-01

    Full Text Available El objetivo del trabajo fue, en esta primera etapa, comparar las propiedades mecánicas y la microestructura del acero HIC, aleado al Nb-Ti-Cu-Ni, resistente a la corrosión, con las del acero normal NOR, microaleado con Nb-V-Ti, ambos caracterizados mediante análisis químico, mediciones de dureza, estudios metalográficos y ensayos de tracción e impacto. Con el fin de establecer la temperatura de precalentamiento óptima se realizaron ensayos de soldabilidad Tekken a distintas temperaturas y de acuerdo con la Norma JIS Z 3158. Luego se llevaron a cabo soldaduras circunferenciales de cañerías fabricadas con ambos aceros diseñándose procedimientos para la utilización, por un lado, de electrodos revestidos (SMAW: shielded metal arc welding, electrodos de distintos proveedores para todas las pasadas y por el otro, la primera pasada usando soldadura automática con alambre macizo bajo CO2 (GMAW: gas metal arc welding y el resto de las mismas con alambre tubular autoprotegido (FCAW-S: flux cored arc welding-selfshielded. Las soldaduras fueron calificadas de acuerdo con el Código API 1104. Los resultados de los análisis metalográficos y los ensayos mecánicos de tracción, dureza e impacto de las juntas soldadas revelaron la influencia de los consumibles de soldadura y del metal base en las propiedades de las uniones. Se observaron diferencias en las propiedades de las uniones soldadas con consumibles de igual especificación y distintos proveedores. De las diferentes combinaciones ensayadas se definieron valores óptimos para la soldadura de estos aceros.The objective of this work was, in this first step, to compare mechanical property and microstructure of the steel HIC, alloyed with Nb-Ti-Cu-Ni, corrosion resistant, to those of a normal steel NOR, microlloyed with Nb-V-Ti, characterized through chemical analysis, hardness measurements, metallographic studies and tensile and Charpy-V properties. The preheating temperature was established

  2. X80管线钢焊接热影响区组织性能改善措施%Discussion on Improving Processing Measure of Welding HAZ Microstructure Performance for X80 Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    赵波; 李国鹏; 王旭; 谷雨; 肖福仁

    2014-01-01

    采用热模拟试验方法,研究了一种X80管线钢热影响区在不同冷速、焊接线能量和峰值温度下的金相组织和力学性能变化规律。试验表明:适当提高焊缝热影响区冷速可以改善其组织和强韧性能;在相同焊接线能量的条件下,试验X80钢焊接热影响区的临界区、粗晶区冲击韧性最差并分别出现一处谷值,细晶区强度最差;采用较小线能量焊接有利于改善热影响区综合强韧性;采用高熔敷率复合高效多丝埋弧焊低线能量化焊接工艺、随焊加速冷却工艺、焊后焊缝及热影响区局部中频正火热处理工艺,可以有效改善X80管线钢热影响区强韧匹配性能。%By using the thermal simulation test, the changing rules of the metallurgical structure and mechanical properties of weld HAZ of X80 pipeline steel under different cooling rates, welding heat inputs and peak temperatures were discussed in this essay. The tests showed that: Appropriate increase of the cooling rate in the weld HAZ can improve the microstructure, strength and toughness of the weld HAZ;under the same welding heat input, the impact toughness of the critical zone and the coarse grain zone are poor and a valley occurs respectively in these two zones, the strength of the fine grain zone is the lowest;welding adopting a relatively low heat input is beneficial to improve the comprehensive strength and toughness of weld HAZ. According to analysis result, a welding procedure with high deposit rate, high-efficiency multi-wire submerged arc welding and lower heat input, a simultaneous accelerate cooling process, and a local intermediate-frequency normalizing treatment of weld & HAZ post-welding can effectively improve the comprehensive strength-toughness performance of weld HAZ of pipeline steel.

  3. HTP 工艺对 X80级管线钢组织和性能的影响%Effect of the HTP on the Structure and Mechanical Properties of X80 Ferrite Steel

    Institute of Scientific and Technical Information of China (English)

    马永杰; 马红梅

    2013-01-01

      利用 HTP 工艺将 X80级管线钢轧制成16 mm 厚的板坯,对其组织和性能进行研究,结果表明:经高温轧制的 X80级管线钢的屈服强度达到600 MPa 以上,其屈强比为0.86,韧脆转变温度低于-60℃,且达到了很好的强韧性匹配;钢中低的硫、磷和高的锰含量及细小的组织能有效的降低韧脆转变温度;钢中存在两种典型的析出物,一类析出物是以 TiN 为主,在 TiN 周围有少量的(Nb、V)(C、N)的复合析出物,另一类析出物为大量的 NbC 和少量TiC、VC同时析出形成的复合析出物;这些很细小的析出物对钢的组织细化和强化起到了重要作用.%The structure and mechanical properties of X80 pipeline steel through HTP rolled into 16 mm thick slab were tested. The results show that the yield strength of tested has reached above 600 MPa,and the ratio of tensile strength to yield strength is 0.86,and ductile-brittle transition temperature is lower than -60 ℃,and good strength and toughness are obtained. Low contents of P,S,high content of Mn and fine microstructure have good effect on reducing the ductile-brittle transitiop temperature. Two different precipitations are observed in X80 pipeline steel:a class of TiN is the main precipitations with a small number of(Nb,V)(C,N) complex precipitations in the TiN around,and the other is the complex formed precipitations with large number of NbC precipitations and a small amount of TiC,VC. Remarkable strengthening and refinement can be caused by these precipitations.

  4. Effect of Cooling Start Temperature on Microstructure and Mechanical Properties of X80 High Deformability Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    ZHENG Xiao-fei; KANG Yong-lin; MENG De-liang; AN Shou-yong; XIA Dian-xiu

    2011-01-01

    The effect of cooling (laminar cooling) start temperature on the phase constitution was analyzed by quanti- tative metallography. The martensite/austenite (M/A) island distribution was fixed by colour metallography. The strength and uniform elongation of the steels were tested with quasi-static tensile testing machine. The in-coordinate deformation of the soft and hard phases was analyzed using FEM. The results indicate that when the cooling start temperature is 690 ℃, the mechanical properties are the best, meeting the requirements of X80 high deformability pipeline steel.

  5. Magnetic and other physical properties of X52, X60, X70, and X80 grade linepipe steels

    Energy Technology Data Exchange (ETDEWEB)

    Richter, F. (Mannesmann-Forschungsinstitut GmbH, Duisburg (Germany, F.R.))

    1989-01-01

    The following magnetic properties were determined for X 52, X 60, X 70, and X 80 grade linepipe steels: magnetic induction as a function of magnetic field strength in the form of hysteresis loops, coercive force and saturation magnetisation. In addition, the following physical properties were determined: coefficient of thermal expansion between -180 and 400{sup 0}C, elastic constants between -180 or 20 and 300{sup 0}C, electrical resistivity, thermal conductivity and thermal diffusivity between -180 and 300{sup 0}C. The crystallographic textures of the materials were represented by pole figures. (orig.).

  6. X60~X80管线钢厚板的热机械轧制

    Institute of Scientific and Technical Information of China (English)

    ANDREAS LEDERES; 邱松年; 李丽琴

    2006-01-01

    本文涉及当今厚板热机械轧制的冶金、工艺和工厂设计见解.分析X60~X80管线钢合金化原理及冶炼、热机械处理的冶金基本原理、热机械轧制时冶金与工艺过程关系及工艺参数影响的关键技术.

  7. RMD根焊技术在X80管道钢焊接中的应用

    Institute of Scientific and Technical Information of China (English)

    吴迪; 衣红兵; 王永刚; 李闯; 牟宗元

    2008-01-01

    介绍了RMD半自动根焊技术所使用设备的工艺原理、新型焊接材料工艺特点以及RMD根焊技术在X80管道钢焊接中的应用情况.总结出RMD根焊技术应用过程中应注意的事项,对根焊过程中产生的缺陷进行了分析.

  8. Vida a la fatiga de juntas soldadas del acero inoxidable AISI 316L obtenidas mediante el proceso GMAW

    Directory of Open Access Journals (Sweden)

    Puchi-Cabrera, E. S.

    2007-06-01

    Full Text Available An investigation has been conducted in order to determine the effect of both the metallic transfer mode (pulsed arc or short circuit and the O2 content in the Ar/O2 gas mixture, of the gas-metal arc welding process (GMAW, on the fatigue life under uniaxial conditions of welded joints of 316L stainless steel. It has been concluded that the mixture of the protective gases employed in the process could have an important influence on the fatigue life of the welded joints of such steel in two different ways. Firstly, through the modification of the radius of curvature at the joint between the welding toe and the base metal and, secondly, through a more pronounced degree of oxidation of the alloying elements induced by a higher O2 content in the mixture. As far as the metallic transfer mode is concerned, it has been determined that the welded joints obtained under a pulsed arc mode show a greater fatigue life in comparison with the joints obtained under short circuit for both gas mixtures.

    Se ha llevado a cabo una investigación con la finalidad de determinar el efecto, tanto del modo de transferencia metálica (arco pulsado o cortocircuito como del contenido de O2 en la mezcla de gases protectores Ar/O2, del proceso de soldadura a tope mediante arco metálico con protección gaseosa (GMAW, sobre la vida a la fatiga en condiciones uniaxiales de juntas soldadas del acero inoxidable AISI 316L. Dicho trabajo ha permitido concluir que la composición de la mezcla de gases protectores del proceso GMAW pudiera tener una influencia importante en la vida a la fatiga de las juntas soldadas de dicho material, a través de dos formas distintas: primero, mediante la modificación del radio de curvatura entre la raíz del cordón de soldadura y el metal base y, en segundo lugar, a través del mayor grado de oxidación de los elementos de aleación. En cuanto al modo de transferencia metálica, se determinó que las juntas soldadas mediante arco pulsado

  9. Effects of contents of Nb and C on hot deformation behaviors of high Nb X80 pipeline steels

    Institute of Scientific and Technical Information of China (English)

    QIAO Gui-ying; XIAO Fu-ren; ZHANG Xiao-bing; CAO Ya-bin; LIAO Bo

    2009-01-01

    The behavior of the flow deformation and the effects of contents of Nb and C on deformation behaviors of high Nb X80 pipeline steels during hot compression deformation were studied by thermal simulation test.The content of solid solution Nb was quantificationally studied during the reheating and hot deformation process,and the effects of change of solid solution Nb in steels on hot deformation behaviors were discussed.The results show that the contents of Nb and C have great effects on the flow stress behaviors of high Nb X80 pipeline steels.When the C content in steels is constant,the recrystallization activation energy increases from 387 to 481 kJ/mol with increasing the Nb from 0.082% to 0.13% (mass fraction).However,the effect of Nb is correlative to the C content,I.e.w(Nb)/w(C).When w(Nb)/w(C) decreases from 3.61 to 2.18,the recrystallization activation energy decreases from 481 to 434 kJ/mol.

  10. Comportamiento a fatiga de uniones soldadas GMAW de la aleación de aluminio AA 7020

    Directory of Open Access Journals (Sweden)

    Bloem, C. A.

    2007-04-01

    Full Text Available The aim of this investigation is to evaluate the influence on the fatigue behavior by the finishing of the bulge in a welded aluminium-zinc-magnesium alloy AA7020. It was determined
    that total or partial elimination of the bulge has very little influence on its behavior, giving a very similar result on both cases, where one is better than the other by only 3%.

    El objetivo de la presente investigación es evaluar la influencia del acabado del sobrecordón en la respuesta a fatiga de las uniones soldadas realizadas sobre una aleación Al-ZnMg AA7020. Se determinó que la eliminación total o parcial del sobrecordón ejerce poca influencia en su comportamiento, obteniéndose en ambos casos una respuesta similar, donde la mejora de uno respecto del otro no es superior al 3%.

  11. Effect of CO2 Partial Pressure on Corrosion Resistance of X80 Pipeline Steel%CO2分压对X80管线钢腐蚀性能的影响

    Institute of Scientific and Technical Information of China (English)

    刘晓玮; 蔡庆伍; 武会宾; 张杰

    2012-01-01

    模拟油田CO2驱油现场环境,利用高温高压反应釜,采用失重法、扫描电镜(SEM)、X射线衍射(XRD)等方法,研究了不同CO2分压对X80管线钢腐蚀性能的影响。结果表明,X80管线钢的腐蚀速率随着CO2分压的升高呈先升高后下降的趋势,在CO2分压为1.5MPa时达到最大值。当CO2分压为0 MPa和0.5 MPa时发生均匀腐蚀,当分压升高到1.5MPa和2MPa时发生了局部腐蚀。CO2分压为0MPa时的腐蚀产物为非晶态物质,其余各分压下的腐蚀产物均以FeCO3为主。随着CO2分压的升高,腐蚀产物与基体结合的紧密度随着CO2分压的升高越来越紧密;腐蚀产物膜厚度呈先升高后降低的趋势,与腐蚀速率的变化相对应。%The effect of CO2 partial pressure on corrosion resistance of X80 pipeline steel was investigated in high temperature and pressure autoclave simulating the downhole environment of an oil field,using the weight loss method,SEM and XRD.The results showed that with increasing CO2 partial pressure,the corrosion rate of X80 pipeline steel showed the tendency of fluctuation,and the maximum rate appeared at the CO2 partial pressure of 1.5 MPa.Uniform corrosion occurred when the CO2 partial pressure was 0 MPa and 0.5 MPa.When the CO2 partial pressure was 1.5 MPa and 2 MPa,localized corrosion occurred.The corrosion product was composed of noncrystalline substance at partial pressure of 0 MPa,and mainly composed of FeCO3 at other partial pressures.With increasing the CO2 partial pressure,the combination between corrosion product and substrate was increasingly close,and the thickness of corrosion product showed the tendency of fluctuation,corresponding to the change in corrosion rate.

  12. 26.4 mm厚规格X80HD2管线钢的开发%Development of 26.4 mm Thick Specification X80HD2 Pipeline Steel

    Institute of Scientific and Technical Information of China (English)

    刘志刚

    2015-01-01

    Based on low C and high manganese content, Nb, Cr, Cu, Ni, Ti and other Alloying elements were added for design the alloy system. Using clean steel metallurgy technology alloy system, strengthening and combining with the two stage rolling and ACC multi path laminar cooling process to ensure the strength and toughness, the X80HD2 steel plate with the large strain was developed. The transverse yield strength of the steel plate with ferrite+bainite dual phase structure is 470-568 MPa, the transverse tensile strength is 660-760 MPa and the Rt0.5/Rm is 0.65-0.79. The longitudinal yield strength of the plate is 455-540 MPa, the longitudinal tensile strength is 660-727 MPa and the Rt0.5/Rm is 0.64-0.77, the Rt1.5/Rt0.5 is more than 1.13 and the Rt2.0/Rt1.0 is more than 1.06. All the intensity indexes meet the requirements of the Standard and the performance indexes show a normal distribution. Combing with the newly developed pipe manufacture process, the X80HD2 welding pipe with anti deformation property put into mass production have good strength and large uniform elongation and stress ratio.%以低C高Mn为基础,添加Nb、Cr、Ni、Ti、Cu等合金进行合金体系设计,采用洁净钢冶金技术,通过强化并结合两阶段轧制和ACC多路径层流冷却工艺来保证钢板的强度和高韧性,开发了大应变X80HD2管线钢。钢板具有铁素体+贝氏体双相组织,横向屈服强度470~568 MP,抗拉强度660~760 MPa,屈强比0.65~0.79;纵向屈服强度455~540 MPa,抗拉强度660~727 MPa,屈强比0.64~0.77;Rt1.5/Rt0.5均>1.13,Rt2.0/Rt1.0均>1.06。各项强度指标满足标准要求,各项性能指标呈正态分布。结合新开发的制管工艺,使批量生产的X80HD2抗大变形焊管具有良好的强度、大的均匀伸长率和应力比等优点。

  13. Comparative Analysis of Performances for Tube Manufacture of HTP-made and TMCP-made X80 Steel Plates%HTP与TMCP工艺X80钢级板材制管性能的对比分析

    Institute of Scientific and Technical Information of China (English)

    王晓香; 李延丰

    2007-01-01

    通过对低碳高铌不添加钼的Cr-Nb微合金钢高温轧制(HTP)、低碳Mo-Nb微合金化钢传统热机械轧制(TMCP)的两种钢板制管性能的对比分析,证实了采用HTP工艺技术生产的管线钢板完全能够制造出符合现行技术标准要求的X80钢级直缝埋弧焊管,而且生产成本大幅度降低,有助于提升管线管的竞争力.

  14. 大口径X80钢应变极限有限元分析

    Institute of Scientific and Technical Information of China (English)

    李果

    2015-01-01

    通过Gurson损伤模型和基于应变的断裂评估方法,建立了有限元模型,模拟不同裂纹深度、长度下X80管道对应的拉应变极限。通过分析可知,在裂纹较浅时,随着裂纹长度的增加,管道拉应变极限变化不大;在裂纹较深时,管道拉应变极限随着裂纹长度的增加而降低;对于相同裂纹长度,随着裂纹深度的增加,管道拉应变极限降低。

  15. Web API Fragility: How Robust is Your Web API Client

    NARCIS (Netherlands)

    Espinha, T.; Zaidman, A.; Gross, H.G.

    2014-01-01

    Web APIs provide a systematic and extensible approach for application-to-application interaction. A large number of mobile applications makes use of web APIs to integrate services into apps. Each Web API’s evolution pace is determined by their respective developer and mobile application developers

  16. Web API Fragility: How Robust is Your Web API Client

    NARCIS (Netherlands)

    Espinha, T.; Zaidman, A.; Gross, H.G.

    2014-01-01

    Web APIs provide a systematic and extensible approach for application-to-application interaction. A large number of mobile applications makes use of web APIs to integrate services into apps. Each Web API’s evolution pace is determined by their respective developer and mobile application developers a

  17. Learning Bing maps API

    CERN Document Server

    Sinani, Artan

    2013-01-01

    This is a practical, hands-on guide with illustrative examples, which will help you explore the vast universe of Bing maps.If you are a developer who wants to learn how to exploit the numerous features of Bing Maps then this book is ideal for you. It can also be useful for more experienced developers who wish to explore other areas of the APIs. It is assumed that you have some knowledge of JavaScript, HTML, and CSS. For some chapters a working knowledge of .Net and Visual Studio is also needed.

  18. AUTOMATED API TESTING APPROACH

    Directory of Open Access Journals (Sweden)

    SUNIL L. BANGARE

    2012-02-01

    Full Text Available Software testing is an investigation conducted to provide stakeholders with information about the quality of the product or service under test. With the help of software testing we can verify or validate the software product. Normally testing will be done after development of software but we can perform the software testing at the time of development process also. This paper will give you a brief introduction about Automated API Testing Tool. This tool of testing will reduce lots of headache after the whole development of software. It saves time as well as money. Such type of testing is helpful in the Industries & Colleges also.

  19. Contracting the Facebook API

    OpenAIRE

    2010-01-01

    In recent years, there has been an explosive growth in the popularity of online social networks such as Facebook. In a new twist, third party developers are now able to create their own web applications which plug into Facebook and work with Facebook's "social" data, enabling the entire Facebook user base of more than 400 million active users to use such applications. These client applications can contain subtle errors that can be hard to debug if they misuse the Facebook API. In this paper w...

  20. Avaliação da Influência de Tratamentos Térmicos Pós-Soldagem Sobre a Microestrutura e Propriedades Mecânicas de Juntas de um Aço API 5L X70Q

    Directory of Open Access Journals (Sweden)

    Lívia Carla Silva de Araújo

    2015-06-01

    Full Text Available ResumoAços que atendem à norma API 5L são aplicados na construção de dutos e há grande interesse naqueles de maior resistência, como o grau API 5L X70Q. Ainda são escassos os estudos relacionados a tubos sem costura. Durante a montagem, os tubos podem ser soldados por eletrodos revestidos (SMAW e eventualmente sofrer aquecimento indutivo para adequação à topografia do terreno, processos que podem alterar a microestrutura das juntas. Neste trabalho foram obtidas juntas soldadas pelo processo SMAW, a partir de tubo sem costura grau API 5L X70Q. As juntas foram submetidas a tratamentos térmicos pós-soldagem nas temperaturas 920 °C e 600 °C. Foram realizados ensaios de tração, impacto Charpy e microdureza, além de caracterização metalográfica nas amostras de metal base e nas juntas como soldadas e após os tratamentos térmicos. O tratamento térmico a 920 °C promoveu a formação de estrutura ferrita/perlita, com consequente redução na resistência mecânica das juntas a valores inferiores aos especificados para o grau X70Q. Porém, o tratamento térmico a 600 °C mostrou-se benéfico devido à redução da fração volumétrica dos constituintes martensita/austenita e martensita-austenita-bainita, sem reduzir de forma significativa a resistência mecânica e com relativo ganho na tenacidade ao impacto na ZTA e na ZF.

  1. R&D of φ1 219 mm X80 LSAW linepipe for No.2 west-east gas transmission pipeline projec%西气东输二线管道工程用X80钢级φ1219 mm直缝埋弧焊管的研发

    Institute of Scientific and Technical Information of China (English)

    李延丰

    2009-01-01

    介绍了西气东输二线管道工程用X80钢级φ1219 mm直缝埋弧焊管的研发情况.主要分析研究了X80钢级φ1219 mm直缝埋弧焊管的JCO成型、焊接、机械扩径、超声波自动探伤等技术;X80钢的理化性能试验结果;X80钢制管前后的拉伸性能、夏比冲击韧性、DWTT性能变化;X80钢级钢板夏比冲击韧性与温度的关系、屈强比的合理确定.

  2. Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing

    Science.gov (United States)

    Avila, Julian A.; Lucon, Enrico; Sowards, Jeffrey; Mei, Paulo Roberto; Ramirez, Antonio J.

    2016-06-01

    Friction-stir welding (FSW) is an alternative welding process for pipelines. This technology offers sound welds, good repeatability, and excellent mechanical properties. However, it is of paramount importance to determine the toughness of the welds at low temperatures in order to establish the limits of this technology. Ductile-to-brittle transition curves were generated in the present study by using a small-scale instrumented Charpy machine and miniaturized V-notch specimens (Kleinstprobe, KLST); notches were located in base metal, heat-affected, stirred, and hard zones within a FSW joint of API-5L X80 Pipeline Steel. Specimens were tested at temperatures between 77 K (-196 °C) and 298 K (25 °C). Based on the results obtained, the transition temperatures for the base material and heat-affected zone were below 173 K (-100 °C); conversely, for the stirred and hard zones, it was located around 213 K (-60 °C). Fracture surfaces were characterized and showed a ductile fracture mechanism at high impact energies and a mixture of ductile and brittle mechanisms at low impact energies.

  3. Twitter manager GO API intended for GNU Social API

    OpenAIRE

    Janiga, Jaroslav

    2015-01-01

    The bachelor’s thesis had two goals. The first one was to create API for GO programming language that communicates with GNU Social API. The second one was to create an application that uses the mentioned API. The main purpose of creating the application was to reduce the time spent with the login and logout of the accounts by the members in the white team. The application is intended for training purposes in JYVSECTEC project at JAMK University of Applied Sciences. JYVSECTEC sta...

  4. Formación de fase sigma en uniones soldadas de acero inoxidable súper dúplex fundido

    Directory of Open Access Journals (Sweden)

    Garin, J. L.

    2011-08-01

    Full Text Available This paper decribes the microstructural characteristics of weldments of cast super duplex stainless steel (J93404, being subjected to annealing processes to induce formation of sigma-phase at high temperatures. The influence of heating time at 1073 K, 1123 K and 1173 K upon precipitation of sigma in the heat affected zone, base metal and fusion zone of the weldments was analyzed. The experimental results revealed the formation of this intermetallic compound throughout decomposition of the ferritic phase into austenite and sigma. At earlier stages of the transformation the phase rapidly nucleates and growth along the ferrite-austenite grain boundaries, and then massively advances towards the bulk of the ferritic zone with greater effectiveness as temperature increases. The formation of sigma-phase in all weldments resembles the Johnson-Mehl-Avrami’s mechanism stated for nucleation and growth.

    El presente trabajo describe las características microestructurales de uniones soldadas de acero súper dúplex fundido (J93404, al ser sometidas a procesos de recocido para inducir la formación de fase sigma a altas temperaturas. Se analizó la influencia del tiempo de calentamiento a 1.073 K, 1.123 K y 1.173 K sobre la precipitación de fase sigma en la zona afectada térmicamente, metal base y zona de fusión de los conjuntos soldados. Los resultados experimentales evidenciaron la formación de este compuesto intermetálico por descomposición de la fase ferrítica en austenita y sigma. Al comienzo de la transformación la fase nuclea y crece rápidamente en los bordes de grano austenita-ferrita, extendiéndose luego masivamente hacia el seno de la zona ferrítica, con mayor efectividad en términos del aumento de la temperatura de proceso. La formación de sigma en todas las uniones soldadas obedece a un mecanismo de nucleación y crecimiento del tipo Jonson-Mehl-Avrami.

  5. A Review on Genomics APIs

    Directory of Open Access Journals (Sweden)

    Rajeswari Swaminathan

    2016-01-01

    Full Text Available The constant improvement and falling prices of whole human genome Next Generation Sequencing (NGS has resulted in rapid adoption of genomic information at both clinics and research institutions. Considered together, the complexity of genomics data, due to its large volume and diversity along with the need for genomic data sharing, has resulted in the creation of Application Programming Interface (API for secure, modular, interoperable access to genomic data from different applications, platforms, and even organizations. The Genomics APIs are a set of special protocols that assist software developers in dealing with multiple genomic data sources for building seamless, interoperable applications leading to the advancement of both genomic and clinical research. These APIs help define a standard for retrieval of genomic data from multiple sources as well as to better package genomic information for integration with Electronic Health Records. This review covers three currently available Genomics APIs: a Google Genomics, b SMART Genomics, and c 23andMe. The functionalities, reference implementations (if available and authentication protocols of each API are reviewed. A comparative analysis of the different features across the three APIs is provided in the Discussion section. Though Genomics APIs are still under active development and have yet to reach widespread adoption, they hold the promise to make building of complicated genomics applications easier with downstream constructive effects on healthcare.

  6. Influences of Temperature and pH Value on the Corrosion Behaviors of X80 Pipeline Steel in Carbonate/Bicarbonate Buffer Solution

    Institute of Scientific and Technical Information of China (English)

    LI,Jin-Bo; ZUO,Jian-E

    2008-01-01

    The joint effect of temperature and pH value on the corrosion behavior of X80 steel in carbonate/bicarbonate buffer solution was detected by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis. The results show that an unstable corrosion film will be formed on the X80 steel surface in low pH value solutions, and a better protective corrosion film can be formed on the X80 steel surface in high pH value solutions. On the whole, the corrosion film resistance and transfer resistance increase with the increment of pH value, and decrease with increase of solution temperature, which indicates that the protective effect of the corrosion film on X80 steel is enhanced with increasing pH value and decreasing the solution temperature. The corrosion film formed on X80 steel surface in carbonate/bicarbonate buffer solution has an n-type semi-conductive character, and the donor density decreases with increasing the pH value, and increases with increasing the solution temperature. The flat-band potential and pH value have a linear relationship with a positive slope.

  7. Microstructures and Plane Energy Spectra of X80 Pipeline Steel Welded Joints by Submerged Arc Automatic Welding

    Institute of Scientific and Technical Information of China (English)

    KONG Dejun; YE Cundong; GUO Wei; WU Yongzhong; LONG Dan

    2014-01-01

    X80 pipeline steel was welded with submerged arc automatic welding, the microstructures, cavity sizes, fusion depths and plane scanning of chemical elements in the welded zone, fusion zone, heat affected zone and base steel were observed with OM (optical microscope) and SEM (scanning electron microscope), respectively. The experimental results show that there is main acicular ferrite in the base steel and welded zone, the microscopic structure of fusion zone is a blocked bainite, and the heat affected zone is composed of multilateral ferrite and pearlite. M-A unit of the welded zone is the main factor to strengthen the welded zone, composed of acicular ferrites. The percentage of cavities in the welded joint is less than that in the base steel, which is beneficial to increasing its mechanical performance and corrosion resistance. The fusion depth in the fusion zone and welded zone is 101.13μm and 115.85μm, respectively, and the distribution of chemical elements in the welded zone is uniform, no enrichment phenomena.

  8. Intro to the Zotero API

    Directory of Open Access Journals (Sweden)

    Amanda Morton

    2013-04-01

    Full Text Available In this lesson, you’ll learn how to use python with the Zotero API to interact with your Zotero library. The Zotero API is a powerful interface that would allow you to build a complete Zotero client from scratch if you so desired. But like most APIs, it works in small, discrete steps, so we have to build our way up to the complicated requests we might want to use to access our Zotero libraries. But this incremental building gives us plenty of time to learn as we go along.

  9. Analysis of the Long-Term Corrosion Behavior of X80 Pipeline Steel in Acidic Red Soil Using Electrical Resistance Test Technique

    Directory of Open Access Journals (Sweden)

    Shuaixing Wang

    2015-01-01

    Full Text Available The long-term corrosion rate of X80 steel in an acidic red soil was monitored in situ by using a precise electrical resistance (ER test system. The corrosion characteristics of X80 steel were examined via SEM, EDS, and XRD. The results indicated that the corrosion rate determined from ER test was very similar to that obtained from the mass loss test. The ER test technique made it possible to predict the long-term corrosion rate of steel in soil in situ. The corrosion rate of X80 steel in acidic red soil was about 0.0902 mm/a at 38 weeks, but the corrosion rate was dropped to 0.0226 mm/a after 5 years. The final corrosion product layer was composed mainly of FeOOH, γ-Fe2O3, and FeCO3.

  10. Stress Corrosion Cracking of X80 Pipeline Steel in Near-Neutral pH Environment under Constant Load Tests with and without Preload

    Institute of Scientific and Technical Information of China (English)

    Y.Z. Jia; J.Q. Wang; E.H. Han; W. Ke1

    2011-01-01

    Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute (API) X80 pipeline steel applied in the 2nd West-East (;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.

  11. CORROSION RESISTANCE OF Fe–Al/Al2O3 DUPLEX COATING ON PIPELINE STEEL X80 IN SIMULATED OIL AND GAS WELL ENVIRONMENT

    OpenAIRE

    MIN HUANG; YU WANG; PING-GU WANG; QIN-YI SHI; MENG-XIAN ZHANG

    2015-01-01

    Corrosion resistant Fe–Al/Al2O3 duplex coating for pipeline steel X80 was prepared by a combined treatment of low-temperature aluminizing and micro-arc oxidation (MAO). Phase composition and microstructure of mono-layer Fe–Al coating and Fe–Al/Al2O3 duplex coating were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) with energy dispersive spectrometer (EDS). Corrosion resistance of the coated pipeline steel X80 in a simulated oil and gas well condition was also investig...

  12. Development of Φ1219mm×22mm LSAW Pipe in Mo-containing X80 Steel Grade%Φ1 219mm×22mm X80钢级含Mo直缝埋弧焊管的开发

    Institute of Scientific and Technical Information of China (English)

    李延丰; 任毅; 陈小伟

    2008-01-01

    通过研制西气东输二线天然气管道工程用Φ1219mm×22mm X80钢级含Mo直缝埋弧焊管,研究了X80钢级含Mo钢板的焊接性、热影响区的弱化,并对矩形和圆棒拉伸试样进行了对比试验分析,对Φ1219mm×22mm X80钢级HTP与含Mo直缝埋弧焊管的主要性能进行了对比分析.提出了厚壁X80钢级管线钢管的拉伸试验应采用圆棒试样的建议.

  13. Avaliação da resistência à corrosão-fadiga no aço API 5L X60 em meio aquoso salino

    OpenAIRE

    Juciele Leyter Zilio

    2013-01-01

    As condições para a exploração do petróleo em campos do pré-sal são mais severas que as convencionais no que se refere à pressão, temperatura, concentração de CO2 e H2S. Nesse contexto, os dutos responsáveis pela transferência do petróleo do fundo do mar até os tanques de armazenamento na superfície representam uma importância fundamental no processo de produção do petróleo. Dessa forma, o objetivo deste trabalho foi estudar o comportamento em corrosão-fadiga de juntas soldadas do aço API 5L ...

  14. Influência da corrente de soldagem nas propriedades de juntas de aço de alta resistência e baixa liga soldadas com eletrodo revestido

    OpenAIRE

    Pereira Guedes, Ricardo

    2009-01-01

    Este trabalho apresenta o resultado do estudo da caracterização das propriedades mecânicas e estruturais de juntas soldadas com variação de parâmetros de soldagem na faixa especificada para a aplicação do eletrodo revestido, e analisar os possíveis problemas na soldagem de aços para tubulação usados na montagem das malhas de redes de gasodutos. Estas redes se proliferaram em nosso País, principalmente com as investidas das Distribuidoras de Gás Natural para suprir as demanda...

  15. Efeitos da Energia de Soldagem e Consumível sobre a Resistência à Flexão Simples de Juntas Soldadas em Perfis Tubulares de Aço TMCP

    Directory of Open Access Journals (Sweden)

    Rafael Luciano Dalcin

    2016-03-01

    Full Text Available Resumo A introdução dos aços fabricados por processamento termomecânico controlado (TMCP demandou maiores propriedades mecânicas e metalúrgicas das juntas soldadas sobre eles produzidas. Em função desses fatores, a energia de soldagem é estritamente limitada, e para evitar uma eventual redução da resistência mecânica da zona afetada pelo calor (ZAC, é necessário testar os procedimentos de soldagem próximos daqueles que serão usados na estrutura real. Desta forma, o objetivo deste estudo é obter dados detalhados referentes à eficiência mecânica de juntas soldadas pelo processo MAG e com diferentes energias de soldagem, sobre perfis tubulares quadrados em aço TMCP, formando um conjunto soldado coluna/viga. Portanto, seis distintas energias de soldagem e dois metais de adição foram utilizados (AWS ER80S-G e AWS ER120S-G, com as soldas posicionadas em todo o contorno do perfil. As doze estruturas soldadas foram instrumentadas e submetidas à flexão simples. Comparando-se as juntas soldadas produzidas com mesma energia de soldagem, e apesar dos efeitos similares sobre a zona afetada pelo calor (ZAC, aquelas fabricadas com o consumível AWS ER120S-G apresentaram maior resistência mecânica.

  16. Automated Ply Inspection (API) for AFP Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Automated Ply Inspection (API) system autonomously inspects layups created by high speed automated fiber placement (AFP) machines. API comprises a high accuracy...

  17. USAJOBS Job Opportunity Announcements (JOA) SOAP API

    Data.gov (United States)

    Office of Personnel Management — The purpose of the SOAP based API is to provide the full Federal Job Opportunity Announcement (JOA) content to the consumer. It is anticipated that this API will be...

  18. Go.USA.gov URL Shortner API

    Data.gov (United States)

    General Services Administration — The Go.USA.gov REST API allows you interact with Go.USA.gov by shortening URLs, previewing long urls, and getting the number of clicks to a Go.USA.gov URL.. An API...

  19. USAJOBS Job Opportunity Announcements (JOA) REST API

    Data.gov (United States)

    Office of Personnel Management — This REST-based API is designed to support lightweight Federal Job Opportunity Announcement (JOA) content consumption by consumers. It is anticipated that this API...

  20. R & D of φ1219 mm X80 LSAW Linepipe for No.2 West-East Gas Transmission Pipeline Project%西气东输二线管道工程用X80钢级φ1219 mm直缝埋弧焊管的研发

    Institute of Scientific and Technical Information of China (English)

    李延丰

    2009-01-01

    介绍了西气东输二线管道工程用X80钢级φ1219 am直缝埋弧焊管的研发情况.主要分析研究了X80钢级φ1 219 mm直缝埋弧焊管的JCO成型、焊接、机械扩径、超声波自动探伤等技术;X80钢的理化性能试验结果:X80钢制管前后的拉伸性能、夏比冲击韧性、DWTT性能变化;X80钢级钢板夏比冲击韧性与温度的关系、屈强比的合理确定.批量生产证明,此种钢管的各项性能指标均满足标准要求,产品实物质量达到国际先进水平.填补了国内外空白,可显著降低生产成本.

  1. Dimensionamento de juntas soldadas de filete: uma revisão crítica Design of fillet welded joints: a critical review

    Directory of Open Access Journals (Sweden)

    Ivan Guerra Machad

    2011-06-01

    Full Text Available O principal objetivo deste trabalho, é mostrar para os engenheiros(as de soldagem e/ou projetistas de estruturas soldadas, as muitas opções existentes no projeto de juntas soldadas de filete, quando carregadas transversalmente, inclinada, ou paralelamente ao eixo do cordão de solda. Isto é feito através da discussão dos aspectos fundamentais deste tipo de junta, uma série de equações (desde normas e Código que permitem o dimensionamento da garganta, e exemplos utilizando metais base e consumíveis reais. É também propósito deste trabalho alertar estes profissionais, pois cada uma destas normas (tais como AISC e Eurocode 3, Códigos (tal como AWS, ou mesmo organizações reconhecidamente competentes (tal como IIW, têm características específicas (ou "filosofias", algumas delas muito distintas. Finalmente, mas não menos importante, este trabalho encerra analisando juntas soldadas de filete sob conceitos da teoria da elasticidade e plasticidade localizada.The main aim of this work, is to show for the welding engineers and/or designers of welded structures, the many existing options in the design of fillet welded joints, when loaded transverse, inclined, or parallel to the axis of the weld bead. This is done through a discussion on the very fundamental aspects of this kind of joint, a series of equations (from standards or Code that allow the throat dimensioning, and examples using actual base metals and consumables. It is also a purpose of this paper to caution those professionals, for each one of the standards (such as AISC and Eurocode 3, or Codes (such as AWS, or even authoritative organizations (such as IIW, have specific characteristics (or "philosophies", some of them very distinct. Finally, but not less important, this paper closes analysing fillet welded joints under concepts of the theory of elasticity and local plasticity.

  2. 22 mm Thickness of X80 Piates Production for the Second West-to-East Natural Gas Transmission Pipeline by Using OHTP%采用OHTP工艺生产西气东输二线用22 mm厚X80钢板

    Institute of Scientific and Technical Information of China (English)

    聂文金; 王志福; 李冉; 李玉藏; 张晓兵

    2009-01-01

    针对西气东输二线项目用厚规格X80钢板技术要求和沙钢炼钢、轧钢技术装备条件,采用低碳、高铌的HTP成分和OHTP(Optimized High Temperature Processing)控轧控冷工艺,进行了22 mm厚X80钢板批量生产和JCOE直缝焊管制管试验.结果表明,OHTP X80钢板无论力学性能、-15℃落锤性能,还是JCOE制管后管体屈强比均比HTP钢有明显改善.OHTP X80钢板-80℃下夏比冲击吸收能仍处于上平台,CVN值大于270 J,50%FATT低于-100℃,-30℃下DWTT落锤试验断口剪切面积的比例大于90%,85%DWTT为-34℃.

  3. Automated information extraction from web APIs documentation

    OpenAIRE

    Ly, Papa Alioune; Pedrinaci, Carlos; Domingue, John

    2012-01-01

    A fundamental characteristic of Web APIs is the fact that, de facto, providers hardly follow any standard practices while implementing, publishing, and documenting their APIs. As a consequence, the discovery and use of these services by third parties is significantly hampered. In order to achieve further automation while exploiting Web APIs we present an approach for automatically extracting relevant technical information from the Web pages documenting them. In particular we have devised two ...

  4. Accessing Inaccessible Android APIs: An Empirical Study

    OpenAIRE

    Li, LI; Bissyande, Tegawendé François D Assise; Le Traon, Yves; Klein, Jacques

    2016-01-01

    As Android becomes a de-facto choice of development platform for mobile apps, developers extensively leverage its accompanying Software Development Kit to quickly build their apps. This SDK comes with a set of APIs which developers may find limited in comparison to what system apps can do or what framework developers are preparing to harness capabilities of new generation devices. Thus, developers may attempt to explore in advance the normally “inaccessible” APIs for building unique API-based...

  5. Accessing Inaccessible Android APIs: An Empirical Study

    OpenAIRE

    LI, Li; Bissyande, Tegawendé François D Assise; Le Traon, Yves; Klein, Jacques

    2016-01-01

    As Android becomes a de-facto choice of development platform for mobile apps, developers extensively leverage its accompanying Software Development Kit to quickly build their apps. This SDK comes with a set of APIs which developers may find limited in comparison to what system apps can do or what framework developers are preparing to harness capabilities of new generation devices. Thus, developers may attempt to explore in advance the normally “inaccessible” APIs for building unique API-based...

  6. Studi Demand Kereta Api Komuter Lawang - Kepanjen

    OpenAIRE

    Rendy Prasetya Rachman; Wahju Herijanto

    2013-01-01

    Dengan semakin pesatnya perkembangan perekonomian di propinsi Jawa Timur, khususnya di area Malang Raya mengakibatkan tingginya perpindahan orang maupun barang di area tersebut. Oleh karena itu, masyarakat membutuhkan alat transportasi yang dapat meningkatkan efisiensi dan efektifitas kegiatan mereka. Sehingga P.T. Kereta Api Indonesia Daerah Operasi VIII akan mengoperasikan kereta api komuter Lawang-Kepanjen. Akan tetapi saat ini sebagian besar pengguna kereta api komuter masih mengalami beb...

  7. BusinessUSA Resource Access API

    Data.gov (United States)

    General Services Administration — BusinessUSA connects businesses to government services and information. The API provides access to resource abstracts including programs, services, data, events, and...

  8. AKTIVITAS ANTIOKSIDAN DAN EFEK HEPATOPROTEKTIF DAUN BAKAU API-API PUTIH

    Directory of Open Access Journals (Sweden)

    safrina dyah hardiningtyas

    2014-07-01

    Full Text Available Penelitian ini bertujuan untuk mendapatkan ekstrak kasar daun api-api putih yang memiliki aktivitas antioksidan terbaik, menentukan kandungan fitokimia dan efek Hepatoprotektif ekstrak kasar yang dipilih secara in vivo. Daun api-api putih diekstrak menggunakan tiga jenis pelarut, yakni metanol, etil asetat dan n-heksana. Dalam uji in vivo dilakukan evaluasi terhadap kadar malondialdehid (MDA, enzim aspartat transaminase (AST, enzim alanin transaminase (ALT, dan histopatologi. Hasil penelitian menunjukkan bahwa ekstraksi daun api-api putih dengan pelarut etil asetat menghasilkan aktivitas antioksidan terbaik dengan kandungan fitokimia terdiri dari flavonoid dan steroid/triterpenoid. Pemberian ekstrak etil asetat daun api-api putih pada tikus yang telah diinduksi CCl4 dapat menormalkan berbagai parameter biokimia stres oksidatif (kadar MDA, AST, dan ALT dibandingkan dengan standar Silymarin. Ekstrak daun api-api putih berpotensi untuk melindungi hati tikus dari kerusakan oksidatif yang diinduksi CCl4. Efek Hepatoprotektif ekstrak daun api-api putih berkorelasi dengan aktivitas antioksidannya.Kata kunci: antioksidan, Avicennia marina, ekstrak, hepatoprotektor

  9. Test research on cold bend of {phi}1219 mm x 22 mm X80 longitudinally submerged-arc welded line pipes

    Energy Technology Data Exchange (ETDEWEB)

    Qiang, Chi; Lingkang, Ji; Yinglai, Liu; Peng, Wang [China National Petroleum Corporation (CNPC), Xi' an (China). Tubular Goods Research Center

    2009-07-01

    The tests of cold bend of {phi}1219 mm x 22 mm X80 longitudinally submerged-arc welded line pipes were done to research the effects of cold bend processes on the configuration and property of X80 steel pipe in this paper. In the filed bend tests, the six kinds radius of curvature consist of 18D, 20D, 24D, 28D, 35D and 47D (D is the diameter of steel pipe) were adopted. The results of welding seam non-destructive and macrograph examination show that the effect of bending process on the quality of welding seam is not obvious. The appearance inspections show that the serious distortions occur on the bend pipes of 18D and 20D radius of curvature. The mechanical property tests results indicate that the change of the transverse tensile property, toughness and hardness of cold bend pipes manufactured by various radius of curvature compare with the mother pipe are smaller. The change of longitudinal tensile property is bigger. Compared with the mother pipe, the yield strength and yield ratio in inner arc of bend pipe decrease, but those in outer arc of bend pipe increase. The longitudinal tensile curves in different sampling locations of bend pipe exhibit a rather large difference. (author)

  10. Estudio microestructural y de resistencia de uniones soldadas de la aleación AW7020 por procedimiento MIG en función de la preparación de bordes

    Directory of Open Access Journals (Sweden)

    Bloem, Carlos Alberto

    2000-02-01

    Full Text Available Medium strength AW7XXX aluminium alloys are widely used as welded structures and in transportation. The applications of these alloys are limited by the behavior of the welded joints. There is not an agreement on the joint geometry that must be used on the 5 mm aluminium welds. The microhardness evolution is one of the most important strength indicator, For this reason, the aim of this work is to study the welded joint geometry influence on microhardness profile and on microstructure of a welded aluminium alloy AW7020 MIG, filled with AW5356.

    Las aleaciones de aluminio de la serie AW7XXX de medias prestaciones se están empleando ampliamente en el sector del transporte, así como en la construcción de estructuras soldadas. La posibilidad de que estas aleaciones se empleen con mayor profusión está condicionada a un mayor conocimiento del comportamiento de la unión soldada. La evolución de la microdureza como un indicador de resistencia es ampliamente utilizado, pero no hay acuerdo sobre el efecto de la preparación de bordes previo a la soldadura y es por ello que el objetivo de este trabajo sea estudiar la influencia de la preparación de bordes sobre el perfil de microdureza y microestructura de la unión soldada de una aleación de aluminio AW7020, soldada mediante el proceso MIG, empleando como metal de aporte AW5356.

  11. Evidence of Apis cerana Sacbrood virus Infection in Apis mellifera

    Science.gov (United States)

    Gong, Hong-Ri; Chen, Xiu-Xian; Chen, Yan Ping; Hu, Fu-Liang; Zhang, Jiang-Lin; Lin, Zhe-Guang; Yu, Ji-Wei

    2016-01-01

    Sacbrood virus (SBV) is one of the most destructive viruses in the Asian honeybee Apis cerana but is much less destructive in Apis mellifera. In previous studies, SBV isolates infecting A. cerana (AcSBV) and SBV isolates infecting A. mellifera (AmSBV) were identified as different serotypes, suggesting a species barrier in SBV infection. In order to investigate this species isolation, we examined the presence of SBV infection in 318 A. mellifera colonies and 64 A. cerana colonies, and we identified the genotypes of SBV isolates. We also performed artificial infection experiments under both laboratory and field conditions. The results showed that 38 A. mellifera colonies and 37 A. cerana colonies were positive for SBV infection. Phylogenetic analysis based on RNA-dependent RNA polymerase (RdRp) gene sequences indicated that A. cerana isolates and most A. mellifera isolates formed two distinct clades but two strains isolated from A. mellifera were clustered with the A. cerana isolates. In the artificial-infection experiments, AcSBV negative-strand RNA could be detected in both adult bees and larvae of A. mellifera, although there were no obvious signs of the disease, demonstrating the replication of AcSBV in A. mellifera. Our results suggest that AcSBV is able to infect A. mellifera colonies with low prevalence (0.63% in this study) and pathogenicity. This work will help explain the different susceptibilities of A. cerana and A. mellifera to sacbrood disease and is potentially useful for guiding beekeeping practices. PMID:26801569

  12. Validation of the Parlay API through prototyping

    NARCIS (Netherlands)

    Hellenthal, J.W.; Planken, F.J.M.; Wegdam, M.

    2001-01-01

    The desire within the telecommunications world for new and faster business growth has been a major drive towards the development of open network API. Over the past 7 years several (semi) standardization groups have announced work on network API, including TINA-C, JAIN, IEEE P1520, INforum, 3GPP, JAI

  13. Mining usage patterns for the Android API

    Directory of Open Access Journals (Sweden)

    Hudson S. Borges

    2015-07-01

    Full Text Available API methods are not used alone, but in groups and following patterns. However, despite being a key information for API users, most usage patterns are not described in official API documents. In this article, we report a study that evaluates the feasibility of automatically enriching API documents with information on usage patterns. For this purpose, we mine and analyze 1,952 usage patterns, from a set of 396 Android applications. As part of our findings, we report that the Android API has many undocumented and non-trivial usage patterns, which can be inferred using association rule mining algorithms. We also describe a field study where a version of the original Android documentation is instrumented with the extracted usage patterns. During 17 months, this documentation received 77,863 visits from professional Android developers.

  14. Avaliação da soldagem multipasse de chapas espessas de aços inoxidáveis lean duplex UNS S32304 soldadas pelos processos SMAW, GMAW e FCAW -: resistência à corrosão

    Directory of Open Access Journals (Sweden)

    Carla Soares Souza

    2013-09-01

    Full Text Available Os aços inoxidáveis duplex (AID vêm se apresentando como uma excelente alternativa para aplicações em que alta resistência à corrosão e alta resistência mecânica são requeridas. Contudo, os AID, incluindo os aços inoxidáveis lean duplex, apresentam soldabilidade inferior em relação aos aços inoxidáveis austeníticos. Esse trabalho tem como objetivo a avaliação da resistência à corrosão de juntas soldadas multipasse de chapas de 22 mm de espessura da liga inoxidável lean duplex UNS S32304, utilizando-se os processos SMAW, GMAW e FCAW e consumíveis com dois tipos de composição química, 22%Cr9%Ni3%Mo e 23%Cr7%Ni, totalizando seis experimentos. As juntas soldadas foram analisadas usando-se a técnica de polarização anódica potenciodinâmica para determinação do potencial de pite do material. O eletrólito estudado foi uma solução salina de cloreto de sódio 3,5% m/v. A junta de aço lean duplex soldada pelo processo GMAW com o consumível 22%Cr9%Ni3%Mo apresentou o melhor comportamento frente à corrosão no meio salino. A região da raiz da solda apresentou o maior potencial de pite em relação ao topo das juntas soldadas. As juntas de aço lean duplex soldadas usando-se o processo FCAW apresentaram um comportamento característico de corrosão generalizada no meio de solução salina, ao contrário das demais amostras.

  15. Effects Of Anodic Protection On SCC Behavior Of X80 Pipeline Steel In High-pH Carbonate-Bicarbonate Solution

    Directory of Open Access Journals (Sweden)

    Zhao W.

    2015-06-01

    Full Text Available The potentiodynamic polarization test and slow strain rate tensile tests of X80 pipeline steel were performed in 0.5M Na2CO3-1M NaHCO3 solution to study the electrochemical and stress corrosion cracking properties. The results of potentiodynamic polarization test show that there is an obvious stable passive region, about from 0v to 0.8V (SCE, indicating that anodic protection is feasible. The results of slow strain rate tensile tests show that the stress corrosion cracking sensibility is high and cathodic protection effect is restricted due to the hydrogen permeation. However, the elongation, yielding strength and tensile strength all increase with anodic protection. The higher anodic protection potential in the stable passive region is benefit to improve tensile strength and yielding strength. However, the higher elongation is obtained at 0.5V (SCE anodic protection potential.

  16. Evidence of Apis cerana Sacbrood virus Infection in Apis mellifera.

    Science.gov (United States)

    Gong, Hong-Ri; Chen, Xiu-Xian; Chen, Yan Ping; Hu, Fu-Liang; Zhang, Jiang-Lin; Lin, Zhe-Guang; Yu, Ji-Wei; Zheng, Huo-Qing

    2016-04-01

    Sacbrood virus(SBV) is one of the most destructive viruses in the Asian honeybee Apis cerana but is much less destructive in Apis mellifera In previous studies, SBV isolates infecting A. cerana(AcSBV) and SBV isolates infecting A. mellifera(AmSBV) were identified as different serotypes, suggesting a species barrier in SBV infection. In order to investigate this species isolation, we examined the presence of SBV infection in 318A. mellifera colonies and 64A. cerana colonies, and we identified the genotypes of SBV isolates. We also performed artificial infection experiments under both laboratory and field conditions. The results showed that 38A. mellifera colonies and 37A. cerana colonies were positive for SBV infection. Phylogenetic analysis based on RNA-dependent RNA polymerase (RdRp) gene sequences indicated that A. cerana isolates and most A. mellifera isolates formed two distinct clades but two strains isolated fromA. mellifera were clustered with theA. cerana isolates. In the artificial-infection experiments, AcSBV negative-strand RNA could be detected in both adult bees and larvae ofA. mellifera, although there were no obvious signs of the disease, demonstrating the replication of AcSBV inA. mellifera Our results suggest that AcSBV is able to infectA. melliferacolonies with low prevalence (0.63% in this study) and pathogenicity. This work will help explain the different susceptibilities ofA. cerana and A. melliferato sacbrood disease and is potentially useful for guiding beekeeping practices.

  17. Propriedades mecânicas e microestruturais de juntas soldadas do aço HY-80 pelos processos eletrodo revestido e GMAW

    Directory of Open Access Journals (Sweden)

    Amilton Sousa Lins Junior

    2014-09-01

    Full Text Available A soldagem de aços de alta resistência representa um desafio constante devido a grande variedade de ligas disponíveis, que necessitam associar requisitos rigorosos de elevada resistência mecânica e tenacidade simultaneamente. Neste contexto, os aços da classe HY-80 amplamente utilizados na Marinha Brasileira, são ainda preferencialmente soldados pelo processo eletrodo revestido apesar das limitações deste processo em comparação com outros processos de soldagem. Com o objetivo de avaliar a possibilidade de uma melhoria de produtividade na soldagem manual deste aço, o presente trabalho apresenta uma análise comparativa entre as propriedades mecânicas de juntas soldadas do aço HY-80 realizadas pelos processos eletrodo revestido e GMAW. Foram realizadas soldagem multipasses pelos processos eletrodo revestido e GMAW com preaquecimento de 90°C e temperatura interpasses máxima de 150°C em chapas de dimensões 850X150X30mm em aço HY-80, na posição plana e energia de soldagem média de 1,29 e 1,36 kJ/mm, respectivamente. Posteriormente, realizou-se tratamento térmico pós-soldagem a 600°C por 1 hora, sendo esta condição comparada com a condição de como soldada. Foram realizados ensaios de tração, impacto Charpy-V, dureza e metalográficos para caracterização microestrutural por microscopia eletrônica de varredura. Adicionalmente, foi realizada uma análise comparativa de produtividade entre os processos. Os resultados mostraram ser possível obter propriedades mecânicas adequadas para todas as condições de análise. Além disso, verificou-se que a produtividade propiciada pelo processo GMAW foi muito superior à do processo eletrodo revestido.

  18. Laboratory evaluation of soil stress corrosion cracking and hydrogen embrittlement of API grade steels

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, A.H.S.; Castro, B.B.; Ponciano, J.A.C. [Federal Univ. of Rio de Janeiro (Brazil). COPPE

    2004-07-01

    Stress corrosion cracking (SCC) in carbon steels is a form of deterioration that can occur during the service life of a pipeline that is exposed to mechanical stress and strains. A study was conducted to investigate SCC and hydrogen embrittlement (HE) of API grade steels in contact with soil. The physical, chemical and bacteriological characteristics of different soil samples were determined. Slow strain rate tests were performed using electrolytes obtained in the soil samples taken from different points near buried pipelines. Stress versus strain curves were obtained at different electrode potentials for API X46, X60 and X80 steels. The results showed the conjoint incidence of SCC and HE, depending on the potential imposed. It was revealed that HE contributes to the initiation of cracking and crack propagation. Cracking morphology was similar to the SCC found in field situations where transgranular cracking was detected in a pipeline that had collapsed as a result of land creeping. The material exhibited signs of secondary cracking and lower ductility, even under cathodic potentials. It was noted that the methodology used in this study was not able to reproduce the possible effect of microbial induced corrosion. 10 refs., 3 tabs., 3 figs.

  19. How do developers use APIs? A case study in concurrency

    NARCIS (Netherlands)

    Blom, Stefan; Kiniry, Joseph; Huisman, Marieke

    2013-01-01

    With the omnipresent usage of APIs in software development, it has become important to analyse how the routines and functionalities of APIs are actually used. This information is in particular useful for API developers, to make decisions about future updates of the API. However, also for developers

  20. Web API Growing Pains: Loosely Coupled yet Strongly Tied

    NARCIS (Netherlands)

    Espinha, T.; Zaidman, A.; Gross, H.G.

    2014-01-01

    Web APIs provide a systematic and extensible approach for application-toapplication interaction. Developers using web APIs are forced to accompany the API providers in their software evolution tasks. In order to understand the distress caused by this imposition on web API client developers we

  1. Analysis and Applications API eBay

    OpenAIRE

    ŠIK, Martin

    2013-01-01

    The subject of this bachelor thesis "Analysis and Applications API eBay" is to create application based on the use of Application Programming Interface (API), released by eBay. The theoretical part is focused on explaining the fundamental issue of Internet auctions, e-commmerce, comparsion of auction portals and term "trust" as a key attribute of e-commerce. The practical part is based on analyse of principles and instruments of eBay API and create an application based on this interface. The ...

  2. DySectAPI: Scalable Prescriptive Debugging

    DEFF Research Database (Denmark)

    Jensen, Nicklas Bo; Karlsson, Sven; Quarfot Nielsen, Niklas;

    We present the DySectAPI, a tool that allow users to construct probe trees for automatic, event-driven debugging at scale. The traditional, interactive debugging model, whereby users manually step through and inspect their application, does not scale well even for current supercomputers. While...... lightweight debugging models scale well, they can currently only debug a subset of bug classes. DySectAPI fills the gap between these two approaches with a novel user-guided approach. Using both experimental results and analytical modeling we show how DySectAPI scales and can run with a low overhead...

  3. Análisis del comportamiento elasto-plástico de grietas internas presurizadas en uniones soldadas de tubos de acero bajo carbono

    Directory of Open Access Journals (Sweden)

    Martín Julián Fernández Cueto

    2011-01-01

    Full Text Available Se analizó el comportamiento elasto-plástico de áreas con grietas internas planas presurizadas. El análisis se efectuó desde el metal base (uniones soldadas de tubos de acero bajo carbono sometidos a presión interna pasando por la zona afectada por el calor hasta el metal depositado. Se usó el programa comercial ANSYS 8.0 [MR] para la simulación en tres dimensiones de modelos geométricos de tubos con grietas internas presurizadas. Se consideró el endurecimiento cinemático y las propiedades reales del material para cada región, mediante elementos finitos con condiciones no lineales de deformación. Se determinaron las trayectorias de fractura y se obtuvieron expresiones que permiten calcular la presión en la grieta y en el tubo. Esto conduce a la fractura de la zona agrietada.

  4. Identificación metalográfica de fases en una junta soldada de acero estructural microaleado y su influencia en el mecanismo de fractura

    Directory of Open Access Journals (Sweden)

    Porras-Arévalo, G. O.

    2005-12-01

    Full Text Available This study seeks to characterize the present phases through welded joint zones of structural steel and to describe the fracture mechanism, offering a support to the metallic construction industry. In most cases, structural designers associate weldments in this construction type with the brittleness in its structure, with the drop toughness and with a high collapse risk for the ductile-brittle transition.

    Este estudio pretende caracterizar las fases presentes a través de las zonas de una junta soldada de acero estructural y describir el mecanismo de fractura, ofreciendo un soporte a la industria de la construcción metálica. En la mayoría de los casos, la utilización de la soldadura en este tipo de construcción se asocia, por los diseñadores estructurales, con la fragilidad de su estructura, con la baja tenacidad y con un alto riesgo de colapso por la transición dúctil-frágil.

  5. Modelamiento y simulación del efecto de la entrada de calor en la penetración de una junta soldada

    Directory of Open Access Journals (Sweden)

    Lina Gómez

    2003-01-01

    Full Text Available En esta investigación se realizó el simulador SimVol, en el cual se experimentó con el fin de encontrar una relación entre la entrada de calor y la penetración de la junta soldada. SimVol se basó en un modelo en 2D, que describe el flujo de calor y el flujo de metal líquido en el charco de una soldadura realizada con el proceso GTAW (Gas Tungsten Arc Welding. En el modelo matemático se incluyen las ecuaciones de Navier-Stokes y la ecuación de energía, las cuales constituyen un sistema de ecuaciones diferenciales parciales de segundo orden, no-lineales, no homogéneas y transitorias. El modelo numérico se desarrolla en Volúmenes Finitos en un esquema totalmente implícito, con malla regular y escalonada; además, debido al desconocimiento del campo de presión es necesario utilizar el algoritmo SIMPLE (Semi-Implicit Method for Pressure-Linked Equations. La investigación también incluye una serie de experimentos que permitieron validar el modelo planteados.

  6. System for Award Management (SAM) API

    Data.gov (United States)

    General Services Administration — The SAM API is a RESTful method of retrieving public information about the businesses, organizations, or individuals (referred to as entities) within the SAM entity...

  7. Online maps with APIs and webservices

    CERN Document Server

    Peterson, Michael P

    2014-01-01

    With the Internet now the primary method of accessing maps, this volume examines developments in the world of online map delivery, focusing in particular on application programmer interfaces such as the Google Maps API, and their utility in thematic mapping.

  8. Real World Uses For Nagios APIs

    Science.gov (United States)

    Singh, Janice

    2014-01-01

    This presentation describes the Nagios 4 APIs and how the NASA Advanced Supercomputing at Ames Research Center is employing them to upgrade its graphical status display (the HUD) and explain why it's worth trying to use them yourselves.

  9. BeXRB Monitor Data API

    Data.gov (United States)

    National Aeronautics and Space Administration — A fully queryable REST API with JSON, XML, and CSV output as well as inline, runable examples. This is a monitor using data from Swift/BAT, MAXI and Fermi/GBM...

  10. ChemSpell Web Service API

    Data.gov (United States)

    U.S. Department of Health & Human Services — The ChemSpell Web Service API provides chemical name spell checking and chemical name synonym look-up. ChemSpell contains more than 1.3 million chemical names...

  11. Influencia de la cantidad de O2 adicionado al CO2 en el gas de protección sobre la microestructura del metal depositado en uniones soldadas de bordes rectos en aceros de bajo contenido de carbono con el proceso GMAW

    OpenAIRE

    Eduardo Díaz-Cedré; Amado Cruz-Crespo; Félix Ramos Morales; Mauricio Tello Rico; Joel Chaparro Gonzáles; Manuel Rodríguez Pérez; Pozo Morejón,Juan A.; Nancy M. Pérez Pino

    2010-01-01

    La presencia de ferrita acicular (FA) en la microestructura del cordón de soldadura, dentro de determinado rango de valores, eleva considerablemente la tenacidad de las uniones soldadas. Es por ello, que el presente trabajo trata sobre un estudio que relaciona la cantidad de ferrita acicular en el cordón en función del contenido de oxígeno presente en la mezcla activa CO2+O2, durante la realización de uniones soldadas de bordes rectos en aceros de bajo carbono con el proceso con electrodo fus...

  12. Influence of Heat Input on Microstructure and Toughness Properties in Simulated CGHAZ of X80 Steel Manufactured Using High-Temperature Processing

    Science.gov (United States)

    Zhu, Zhixiong; Han, Jian; Li, Huijun

    2015-11-01

    To determine and demonstrate the weldability of high-Nb high-temperature processed (HTP) steels and provide extremely valuable information for future line pipe steel design and general steel manufacture, in the current study the toughness in simulated coarse-grained heat-affected zone (CGHAZ) of an X80 grade steel manufactured using HTP was evaluated. The simulated CGHAZs subjected to thermal cycles with various heat inputs (HIs) (0.8 to 5.0 kJ/mm) were produced using a Gleeble 3500 simulator. The microstructures and corresponding mechanical properties were investigated by means of optical microscopy, scanning electron microscopy, electron backscatter diffraction, hardness testing, and Charpy V-notch (CVN) testing. The microstructural examination shows that the simulated CGHAZs consisted of a bainite-dominant microstructure and relatively low amount (testing suggest that superior toughness can be achieved in the studied range of HIs (0.8 to 5 kJ/mm). This is thought to be associated with the combined effects of bainitic microstructure and low M-A fraction as well as comparatively fine austenite grain size in the studied CGHAZs.

  13. Resistência à corrosão de junta dissimilar soldada pelo processo TIG composta pelos aços inoxidáveis AISI 316L e AISI 444

    Directory of Open Access Journals (Sweden)

    Luis Henrique Guilherme

    2014-03-01

    Full Text Available O aço inoxidável AISI 444 tornou-se uma opção para substituir a liga AISI 316L devido ao seu menor custo e satisfatória resistência à corrosão. Entretanto, o uso da liga AISI 444 no feixe tubular de trocadores de calor acarreta na soldagem de uma junta dissimilar. O presente estudo teve por objetivo avaliar a resistência à corrosão da junta tubo-espelho soldada pelo processo TIG composta pelas ligas AISI 316L e AISI 444. A manufatura das amostras consistiu em replicar o projeto da junta tubo-espelho de trocadores de calor. Realizou-se em juntas soldadas ensaios de sensitização, perda de massa por imersão desde a temperatura ambiente até 90 ºC, e ensaios eletroquímicos de polarização potenciodinâmica nos eletrólitos 0,5 mol/L de HCl e 0,5 mol/L de H2SO4. Os resultados mostraram que a junta dissimilar sofreu corrosão galvânica com maior degradação na zona afetada pelo calor (ZAC do tubo AISI 444. Porém, os mecanismos de corrosão localizada (pite e intergranular demonstraram ser mais ativos para a liga AISI 316L. Conclui-se que a junta dissimilar apresentou melhor resistência à corrosão do que a junta soldada composta unicamente pela liga AISI 316L em temperaturas de até 70 ºC, conforme as condições observadas neste trabalho.

  14. Evaluación del comportamiento a fatiga de una unión soldada a tope de acero AISI 1015//Evaluation of the fatigue behaviour of a butt welded joint of AISI 1015 steel

    Directory of Open Access Journals (Sweden)

    Pavel Michel Almaguer‐Zaldivar

    2015-01-01

    Full Text Available Las uniones soldadas son un componente importante de una estructura, por lo que siempre es necesario conocer la respuesta de las mismas sometidas a cargas cíclicas. El objetivo de este trabajo es obtener la curva S-N de una unión soldada a tope de acero AISI 1015 y electrodo E6013 como material de aporte. Los ensayos a fatiga se realizaron de acuerdo a la norma ASTM en una máquina universal MTS810. Se utilizaron probetas de sección rectangular. El ciclo de carga fueasimétrico a tracción, con un coeficiente de asimetría de 0,1. Se obtuvo que la unión estudiada tiene un límite de resistencia a la fatiga de 178 MPa, a un punto de corte de 2 039 093 ciclos.Palabras claves: unión soldada, fatiga, curva S-N, AISI 1015, electrodo E6013._______________________________________________________________________________AbstractWelded joints are an important component in structures, by this reason is necessary to know the behaviour of these elements under cyclic loads. The objective of this work is to obtain the S-N curve of the butt welded joint of AISI 1015 steel and electrode E6013 as the contribution material. Fatiguetest was realized within the ASTM standard in the MTS810 testing machine. Rectangular cross section specimens was used. Cyclic loads was asymmetric tensile and the asymmetry ratio used was 0,1. In this study was obtained the fatigue limit equal to 178 MPa, at the cut point of 2 039 093 cycles.Key words: welded joint, fatigue, S-N curve, AISI 1015 steel, electrode E6013.

  15. APIs and Researchers: The Emperor's New Clothes?

    Directory of Open Access Journals (Sweden)

    Jennifer Edmond

    2015-02-01

    Full Text Available As part of the Europeana Cloud (eCloud project, Trinity College Dublin investigated best practice in the use of web services, such as APIs, for accessing large data sets from cultural heritage collections. This research looked into the provision and use of APIs, and moreover, whether or not more customised programmatic access to datasets is what researchers want or need. In order to understand whether current patterns of API usage reflect a skills gap on the part of researchers or a mismatch of tool to purpose, we looked not only at the creators and developer/users of APIs, but also at humanists already re-using big data; approaches in cultural heritage institutions and other research infrastructures to bring API use to non-technical audiences; and the kinds of training and other support services available or emerging within the data-intensive humanities research lifecycle. We conducted both desk research and a series of 11 interviews with figures working as researchers, developers or data providers, including figures from both the API development and the data usage communities. This research, conducted under the eCloud project and supported by the European Commission’s ICT Policy and Support Programme (Grant number 325091, was begun in March 2014 and is now in its concluding validation stage. The results of the research are not yet finalised, but the contribution is already emerging of this work to the debate about APIs being either the way forward for digital cultural heritage collections, or the Emperor’s New Clothes (or maybe a bit of both.

  16. Comparative Foraging Behavior of Apis Cerana F. and Apis Mellifera L. in Rapeseed under Cage Condition in Chitwan, Nepal

    Directory of Open Access Journals (Sweden)

    Rameshwor Pudasaini

    2014-12-01

    Full Text Available An experiment was conducted to determine the foraging behavior of Apis mellifera L. and Apis cerana F. in rapeseed under cage condition in Chitwan, Nepal during 2012-2013. This experiment showed that Apis cerana F. foraged extra 42 minute per day as compared to Apis mellifera L. Apis cerana F. were more attracted to nectar, whereas Apis mellifera L. were more attracted to pollen collection throughout the day. The activities, in into hives and out from hives, for both species were recorded more at 2:00 pm and least at 8:00 am. The highest in-out were observed at 2:00 pm on both species as Apis mellifera L. 44.33 bees entered into hives and 49.66 bees went out of hives, whereas lower number of Apis cerana F. 43.66 bees entered into hives and 48.16 bees were out of hives. Apis mellifera L. collect 1.22:1 and 0.41:1 pollen nectar ratio at 10:00 am and 4:00 am whereas at same hours Apis cerana collect 1.16:1 and 0.30:1 pollen nectar ratio. Apis cerana F. foraged significantly higher number of rapeseed flowers and plants as compared to Apis mellifera L. under caged condition. It shows that Apis cerana F. was more efficient pollinator as compared to Apis mellifera L. under caged condition.

  17. HHF test with 80x80x1 Be/Cu/SS Mock-ups for verifying the joining technology of the ITER blanket First Wall

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong Won; Bae, Young Dug; Kim, Suk Kwon; Hong, Bong Guen; Jeong, Yong Hwan; Park, Jeong Yong; Choi, Byung Kwon; Jung, Hyun Kyu

    2008-11-15

    Through the fabrication of the Cu/SS and Be/Cu joint specimens, fabrication procedure such as material preparation, canning, degassing, HIP (Hot Isostatic Pressing), PHHT (Post HIP heat treatment) was established. The HIP conditions (1050 .deg. C, 100 MPa 2 hr for Cu/SS, 580 .deg. C 100 MPa 2 hr for Be/Cu) were developed through the investigation on joint specimen fabricated with the various HIP conditions; the destructive tests of joint include the microstructure observation of the interface with the examination of the elemental distribution, tension test, bend test, Charpy impact test and fracture toughness test. However, since the joint should be tested under the High Heat Flux (HHF) conditions like the ITER operation for verifying its joint integrity, several HHF tests were performed like the previous HHF test with the Cu/SS, Be/Cu, Be/Cu/SS Mock-ups. In the present study, the HHF test with Be/Cu/SS Mock-ups, which have 80 mm x 80 mm single Be tile and each material depths were kept to be the same as the ITER blanket FW. The Mock-ups fabricated with three kinds of interlayers such as Cr/Ti/Cu, Ti/Cr/Cu, Ti/Cu, which were different from the developed interlayer (Cr/Cu), total 6 Mock-ups were fabricated. Preliminary analysis were performed to decide the test conditions; they were tested with up to 2.5 MW/m2 of heat fluxes and 20 cycles for each Mock-up in a given heat flux. They were tested with JUDITH-1 at FZJ in Germany. During tests, all Mock-ups showed delamination or full detachment of Be tile and it can be concluded that the joints with these interlayers have a bad joining but it can be used as a good data for developing the Be/Cu joint with HIP.

  18. CALIBRATION, OPTIMIZATION, AND SENSITIVITY AND UNCERTAINTY ALGORITHMS APPLICATION PROGRAMMING INTERFACE (COSU-API)

    Science.gov (United States)

    The Application Programming Interface (API) for Uncertainty Analysis, Sensitivity Analysis, and Parameter Estimation (UA/SA/PE API) tool development, here fore referred to as the Calibration, Optimization, and Sensitivity and Uncertainty Algorithms API (COSU-API), was initially d...

  19. Advanced API security securing APIs with OAuth 2.0, OpenID Connect, JWS, and JWE

    CERN Document Server

    Siriwardena, Prabath

    2014-01-01

    Advanced API Security is a complete reference to the next wave of challenges in enterprise security--securing public and private APIs. API adoption in both consumer and enterprises has gone beyond predictions. It has become the 'coolest' way of exposing business functionalities to the outside world. Both your public and private APIs, need to be protected, monitored and managed. Security is not an afterthought, but API security has evolved a lot in last five years. The growth of standards, out there, has been exponential. That's where AdvancedAPI Security comes in--to wade through the weeds

  20. EFECTO DE LA ALTURA DEL MANGUITO EN UNIONES SOLDADAS EN CAÑERÍAS DE COBRE BUSHING HEIGHT EFFECT IN SOLDERED COPPER PIPE JOINTS

    Directory of Open Access Journals (Sweden)

    Víctor Carmona

    2006-12-01

    Full Text Available Se perforó un tubo de cobre de 28,6 mm de diámetro, por el proceso de taladrado por fluencia térmica (TFT. Se prepararon manguitos de diferentes alturas, haciendo un preperforado con brocas convencionales HSS de diferentes diámetros. Se seleccionaron manguitos de dos alturas diferentes. Se determinó la circularidad de la perforación. Se soldó un tubo cobre de ø 12,7 mm en forma perpendicular a un tubo de cobre de ø 28,6 mm y se determinó la resistencia a la tracción de la unión soldada, para lo cual se diseñó un dispositivo mecánico que fue adaptado en la máquina universal de ensayos. Se hicieron ensayos de microdureza y metalografía de la unión. Se concluyó que el manguito de menor altura es suficiente para que la unión alcance la máxima resistencia.Copper tubes were drilled with thermal flow drilling. Conventional HSS drills diameters were used to make pre drilling holes. Different height bushings were made. Two of the bushing heights were selected. The bushing circularity was measured. A ø 12,7 mm tube was welded perpendicularly on a ø 28,6 mm tube. A especial support device was designed and it was adapted to the Universal Test Machine, to determine the tensile stress of the brazing joint. The micro hardness and metallographic test were made in the brazing zone. As a conclusion the lower height bushing is enough to reach the maximum resistance.

  1. Comparative virulence and competition between Nosema apis and Nosema ceranae in honey bees (Apis mellifera).

    Science.gov (United States)

    Milbrath, Meghan O; van Tran, Toan; Huang, Wei-Fong; Solter, Leellen F; Tarpy, David R; Lawrence, Frank; Huang, Zachary Y

    2015-02-01

    Honey bees (Apis mellifera) are infected by two species of microsporidia: Nosema apis and Nosemaceranae. Epidemiological evidence indicates that N. ceranae may be replacing N. apis globally in A. mellifera populations, suggesting a potential competitive advantage of N. ceranae. Mixed infections of the two species occur, and little is known about the interactions among the host and the two pathogens that have allowed N. ceranae to become dominant in most geographical areas. We demonstrated that mixed Nosema species infections negatively affected honey bee survival (median survival=15-17days) more than single species infections (median survival=21days and 20days for N. apis and N. ceranae, respectively), with median survival of control bees of 27days. We found similar rates of infection (percentage of bees with active infections after inoculation) for both species in mixed infections, with N. apis having a slightly higher rate (91% compared to 86% for N. ceranae). We observed slightly higher spore counts in bees infected with N. ceranae than in bees infected with N. apis in single microsporidia infections, especially at the midpoint of infection (day 10). Bees with mixed infections of both species had higher spore counts than bees with single infections, but spore counts in mixed infections were highly variable. We did not see a competitive advantage for N. ceranae in mixed infections; N. apis spore counts were either higher or counts were similar for both species and more N. apis spores were produced in 62% of bees inoculated with equal dosages of the two microsporidian species. N. ceranae does not, therefore, appear to have a strong within-host advantage for either infectivity or spore growth, suggesting that direct competition in these worker bee mid-guts is not responsible for its apparent replacement of N. apis.

  2. MODAPS Web Services API for LANCE-MODIS

    Data.gov (United States)

    National Aeronautics and Space Administration — MODAPS Web Services API for LANCE-MODIS. This Application Programming Interface (API) encompasses a library of functions that provides programmatic data access to...

  3. Unified Medical Language System Terminology Services (UTS) API

    Data.gov (United States)

    U.S. Department of Health & Human Services — The UTS API is intended for application developers to perform Web service calls and retrieve UMLS data within their own applications. The UTS API provides the...

  4. Studi Demand Kereta Api Komuter Lawang - Kepanjen

    Directory of Open Access Journals (Sweden)

    Rendy Prasetya Rachman

    2013-09-01

    Full Text Available Dengan semakin pesatnya perkembangan perekonomian di propinsi Jawa Timur, khususnya di area Malang Raya mengakibatkan tingginya perpindahan orang maupun barang di area tersebut. Oleh karena itu, masyarakat membutuhkan alat transportasi yang dapat meningkatkan efisiensi dan efektifitas kegiatan mereka. Sehingga P.T. Kereta Api Indonesia Daerah Operasi VIII akan mengoperasikan kereta api komuter Lawang-Kepanjen. Akan tetapi saat ini sebagian besar pengguna kereta api komuter masih mengalami beberapa aspek negatif yaitu seringnya terjadi keterlambatan dan kapasitas tempat duduk yang masih kurang memadai sehingga mengurangi tingkat kenyamanan. Oleh karena itu, diperlukan analisa studi tentang demand kereta api komuter Lawang-Kepanjen. Dengan studi ini diharapkan agar para calon penumpang dapat memperoleh kenyamanan sesuai yang diharapkan. Pembahasan dalam Tugas Akhir ini adalah menganalisis demand yang ada, tarif yang diinginkan masyarakat, menganalisis kapasitas kendaraan dan load factor, serta menganalisis tingkat kenyamanan kendaraan. Sehingga perlu diadakan survei traffic counting, survei asal tujuan, dan survei stated preference dalam penulisan Tugas Akhir ini. Dalam perhitungan demand digunakan metode selisih cost dan metode ratio cost. Faktor yang berpengaruh dalam perhitungan demand ini antara lain asal-tujuan kepergian responden, waktu tempuh kepergian, biaya yang dikeluarkan, frekuensi kepergian, dan minat responden untuk pindah moda menggunakan kereta api komuter ini.Dari hasil analisa didapatkan besar demand untuk kereta api komuter Lawang-Kepanjen ini pada weekend untuk arus Kepanjen-Lawang sebesar 927 orang, dan arus Lawang-Kepanjen sebesar 746 orang. Sedangkan pada weekdays untuk arus Kepanjen-Lawang sebesar 1034 orang dan arus Lawang-Kepanjen sebesar 486 orang. Masyarakat calon pengguna potensial kereta komuter ini mayoritas lebih menyukai pilihan alternatif  tarif Rp 2.000 dengan waktu tempuh 90 menit. Load factor rata

  5. CARACTERIZAÇÃO MICROESTRUTURAL DE JUNTA SOLDADA DE AÇO ASTM A – 131M EH-36 UTILIZADO EM TUBULAÇÕES DE PETRÓLEO E GÁS

    Directory of Open Access Journals (Sweden)

    SILVA, Helio Batista

    2016-11-01

    Full Text Available Este trabalho visa à caracterização de uma junta soldada de tubo de aço ASTM A – 131MEH-36. A caracterização micro e macro estrutural das amostras foram realizados por microscopia ótica e microscopia eletrônica de varredura. As propriedades mecânicas da junta soldada foram analisadas por ensaio de micro dureza. Os resultados mostram uma matriz de grãos ferríticos, alternados com bandas perlíticas alinhadas paralelamente à direção de laminação da chapa, na ZAC foi observada a formação de ferrita acicular, ferrita poligonal e bainita. O ensaio de dureza mostrou que há um aumento na dureza do metal base para a zona fundida como já era esperado. This work aims the characterization of welded joint of steel pipe ASTM A - 131m EH -36. The micro and macro structural characterization of samples were performed by optical microscopy and scanning electron microscopy. The mechanical properties of welded joint were analyzed by micro hardness testing. The results show a matrix of ferritic grains alternating with pearlitic bands aligned parallel to the sheet rolling direction on the HAZ was observed formation of acicular ferrite, polygonal ferrite and bainite. The hardness test showed that there is an increase in base metal hardness to the molten zone as expected.

  6. Empleo de explosivos en el alivio de tensiones residuales de la zona de influencia térmica de uniones soldadas Use of explosives in the reduction of residual stresses in the heated zone of welded unions

    Directory of Open Access Journals (Sweden)

    J. L. Garcia-Jacomino

    2009-06-01

    Full Text Available En el trabajo es estudiado el efecto del tratamiento con explosivos sobre las tensiones residuales de uniones soldadas de aceros al carbono. Se analizan dos modos de disposición de la carga explosiva (disposición lineal y disposición sinusoidal. Como resultado se obtiene que el tratamiento con explosivo por cualquiera de los dos métodos de colocación de carga ofrece un alivio de tensiones en el entorno de 50 - 60 %, demostrándose así la viabilidad del método para aumentar la fiabilidad de las uniones soldadas. Se concluye también que la disposición sinusoidal resulta más ventajosa al requerir de menor cantidad de carga explosiva.In this paper, the effect of explosive charges as a method to reduce the residual stresses in the heated zone of welded unions was studied. A comparative analysis of two geometries of the explosive charge applied on welded unions was made: linear and sinusoidal. The comparative results obtained before and after the explosive treatment demonstrate its effectiveness by the reduction of the residual stresses. Residual stress reduction ranged in the order of 50 and 60%, confirming that explosive treatment offers a viable solution to extend the life of the welded unions.

  7. Nuevas expresiones para el cálculo a torsión de costuras soldadas de filete de configuración compleja. // New expressions for torsion shear stress calculation in welding fillets.

    Directory of Open Access Journals (Sweden)

    H. Hernández Herrera

    2006-09-01

    Full Text Available En el presente trabajo se aplica la Teoría de la Torsión de Perfiles de Paredes Delgadas para el cálculo de las tensiones enlas uniones soldadas con costuras de filete en perfiles de configuración geométrica compleja sometidas a torsión. Seobtienen nuevas expresiones para el cálculo de las tensiones cuyos resultados se aproximan mejor que las expresionesclásicas con relación a los resultados obtenidos por el Método de los Elementos Finitos.Palabras claves: Torsión, uniones soldadas, soldadura de filete.______________________________________________________________________________Abstract.In this paper, the Thin Walled profiles Torsion Theory is applied to calculation of torsional shear stresses of complex geometryprofiles welded joints fillets. New calculation expressions are obtained that allowed to obtain a better aproach than the classicexpressions in relation to the values obtained by the Finite Elements Method.Key words: Torsion, welded joints, welding fillets.

  8. Nuevas expresiones para el cálculo a torsión de costuras soldadas de filete de configuración compleja. // New expressions for torsion shear stress calculation in welding fillets.

    Directory of Open Access Journals (Sweden)

    H. Hernández Herrera

    2004-09-01

    Full Text Available En el presente trabajo se aplica la Teoría de la Torsión de Perfiles de Paredes Delgadas para el cálculo de las tensiones enlas uniones soldadas con costuras de filete en perfiles de configuración geométrica compleja sometidas a torsión. Seobtienen nuevas expresiones para el cálculo de las tensiones cuyos resultados se aproximan mejor que las expresionesclásicas con relación a los resultados obtenidos por el Método de los Elementos Finitos.Palabras claves: Torsión, uniones soldadas, soldadura de filete._______________________________________________________________________________Abstract.In this paper, the Thin Walled profiles Torsion Theory is applied to calculation of torsional shear stresses of complex geometryprofiles welded joints fillets. New calculation expressions are obtained that allowed to obtain a better aproach than the classicexpressions in relation to the values obtained by the Finite Elements Method.Key words: Torsion, welded joints, welding fillets.

  9. Comparing Speech Recognition Systems (Microsoft API, Google API And CMU Sphinx

    Directory of Open Access Journals (Sweden)

    Veton Këpuska

    2017-03-01

    Full Text Available The idea of this paper is to design a tool that will be used to test and compare commercial speech recognition systems, such as Microsoft Speech API and Google Speech API, with open-source speech recognition systems such as Sphinx-4. The best way to compare automatic speech recognition systems in different environments is by using some audio recordings that were selected from different sources and calculating the word error rate (WER. Although the WER of the three aforementioned systems were acceptable, it was observed that the Google API is superior.

  10. Pro REST API development with nodejs

    CERN Document Server

    Doglio, Fernando

    2015-01-01

    Pro REST API Development with Node.js is your guide to managing and understanding the full capabilities of successful REST development. API design is a hot topic in the programming world, but not many resources exist for developers to really understand how you can leverage the advantages. This book will provide a brief background on REST and the tools it provides (well known and not so well known). Understand how there is more to REST than just JSON and URLs. You will then cover and compare the maintained modules currently available in the npm community, including Express, Restify, Vatican,

  11. 47 CFR 61.46 - Adjustments to the API.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... carrier must calculate an API for each affected basket pursuant to the following methodology: APIt =...

  12. The Apis mellifera filamentous virus genome

    Science.gov (United States)

    A complete reference genome of the Apis mellifera Filamentous virus (AmFV) was determined using Illumina Hiseq sequencing. The AmFV genome is a double strand DNA molecule of approximately 498’500 nucleotides with a GC content of 50.8%. It encompasses 251 non overlapping open reading frames (ORFs), e...

  13. Integrated platform and API for electrophysiological data

    Directory of Open Access Journals (Sweden)

    Andrey eSobolev

    2014-04-01

    Full Text Available Recent advancements in technology and methodology have led to growing amounts of increasingly complex neuroscience data recorded from various species, modalities, and levels of study. The rapid data growth has made efficient data access and flexible, machine-readable data annotation a crucial requisite for neuroscientists. Clear and consistent annotation and organization of data is not only an important ingredient for reproducibility of results and re-use of data, but also essential for collaborative research and data sharing. In particular, efficient data management and interoperability requires a unified approach that integrates data and metadata and provides a common way of accessing this information.In this paper we describe GNData, a data management platform for neurophysiological data. GNData provides a storage system based on a data representation that is suitable to organize data and metadata from any electrophysiological experiment, with a functionality exposed via a common application programming interface (API. Data representation and API structure are compatible with existing approaches for data and metadata representation in neurophysiology. The API implementation is based on the Representational State Transfer (REST pattern, which enables data access integration in software applications and facilitates the development of tools that communicate with the service. Client libraries that interact with the API provide direct data access from computing environments like Matlab or Python, enabling integration of data management into the scientist's experimental or analysis routines.

  14. Standard methods for Apis mellifera propolis research

    Science.gov (United States)

    Propolis is one of the most fascinating honey bee (Apis mellifera L.) products. It is a plant derived product that bees produce from resins that they collect from different plant organs and with which they mix beeswax. Propolis is a building material and a protective agent in the beehive. It also pl...

  15. DySectAPI: Scalable Prescriptive Debugging

    DEFF Research Database (Denmark)

    Jensen, Nicklas Bo; Karlsson, Sven; Quarfot Nielsen, Niklas;

    We present the DySectAPI, a tool that allow users to construct probe trees for automatic, event-driven debugging at scale. The traditional, interactive debugging model, whereby users manually step through and inspect their application, does not scale well even for current supercomputers. While...

  16. Integrated platform and API for electrophysiological data.

    Science.gov (United States)

    Sobolev, Andrey; Stoewer, Adrian; Leonhardt, Aljoscha; Rautenberg, Philipp L; Kellner, Christian J; Garbers, Christian; Wachtler, Thomas

    2014-01-01

    Recent advancements in technology and methodology have led to growing amounts of increasingly complex neuroscience data recorded from various species, modalities, and levels of study. The rapid data growth has made efficient data access and flexible, machine-readable data annotation a crucial requisite for neuroscientists. Clear and consistent annotation and organization of data is not only an important ingredient for reproducibility of results and re-use of data, but also essential for collaborative research and data sharing. In particular, efficient data management and interoperability requires a unified approach that integrates data and metadata and provides a common way of accessing this information. In this paper we describe GNData, a data management platform for neurophysiological data. GNData provides a storage system based on a data representation that is suitable to organize data and metadata from any electrophysiological experiment, with a functionality exposed via a common application programming interface (API). Data representation and API structure are compatible with existing approaches for data and metadata representation in neurophysiology. The API implementation is based on the Representational State Transfer (REST) pattern, which enables data access integration in software applications and facilitates the development of tools that communicate with the service. Client libraries that interact with the API provide direct data access from computing environments like Matlab or Python, enabling integration of data management into the scientist's experimental or analysis routines.

  17. How Do Developers Use APIs? A Case Study in Concurrency

    DEFF Research Database (Denmark)

    Blom, Stefan; Kiniry, Joseph; Huisman, Marieke

    2013-01-01

    With the omnipresent usage of APIs in software development, it has become important to analyse how the routines and functionalities of APIs are actually used. This information is in particular useful for API developers, to make decisions about future updates of the API. However, also for developers...... of static analysis and verification tools this information is highly important, because it indicates where and how to put the most efficient effort in annotating APIs, to make them usable for the static analysis and verification tools. This paper presents an analysis of the usage of the routines...

  18. 终轧温度对X80抗大变形管线钢组织性能的影响%Effects of finish rolling temperature on the microstructure and mechanical properties of X80 high deformability pipeline steel

    Institute of Scientific and Technical Information of China (English)

    郑晓飞; 康永林; 孟德亮; 安守勇; 夏佃秀

    2011-01-01

    The finish rolling temperature was determined at 830, 800 and 775 ℃ to investigate its effect on the microstructure and mechanical properties of high deformability pipeline steel. The grain size and volume fraction of ferrite and M/A islands in the steels were measured by metallographic microscopy and image processing software. Electron backscatter diffraction (EBSD) analysis was conducted to ascertain the effective grain size and the volume fraction of high angle grain boundaries. The M/A island forms were observed by transmission electron microscopy (TEM). A quasi-static tensile testing machine was used to test the yield strength, tensile strength and uniform elongation of the three steels. It is indicated that when the finish rolling temperature is 800 ℃ , the steel has the best mechanical properties and can meet the requirements of X80 high deformability pipeline steel.%为了研究终轧温度对抗大变形管线钢组织与力学性能的影响,终轧温度确定为830、800和775℃.采用金相显微镜及图像处理软件测试了铁素体与M/A岛的晶粒尺寸及所占比例;采用电子背散射衍射测定了组织的有效晶粒尺寸和大角度晶界所占的比例;利用透射电镜观察了抗大变形管线钢中M/A岛的基本形态;通过准静态拉伸试验,测定了三种试轧钢的屈服强度、抗拉强度和均匀延伸率.结果表明:终轧温度为800℃时,试轧钢的综合力学性能最优,满足了X80抗大变形管线钢的性能要求.

  19. Linked Vocabulary API for the Earth Sciences Community

    Science.gov (United States)

    Zednik, S.; Fox, P. A.; Fu, L.; West, P.; Ma, X.

    2014-12-01

    The Linked Vocabulary API is a specification for publishing RESTful APIs of vocabularies represented in the Simple Knowledge Organization System (SKOS) as Linked Data on the web. This work began as part of the Coastal and Marine Spatial Planning Vocabularies (CMSPV) project in response to the need for a standard manner for agencies to publish and consume hierarchical vocabularies on the web. The RESTful architecture of the API provides a simple mechanism for consumption of full vocabularies, single vocabulary terms, related terms, and searches on terms. The Linked Data nature of the API promotes interoperability by exposing vocabulary resources as resolvable URIs that may be referenced from other vocabularies or sources of Linked Data and by allowing the published vocabulary to contain references as links to terms from other vocabularies. The Linked Vocabulary API is formally defined in a Linked Data API specification and may be deployed using standard implementations of the Linked Data API such as the Epimorphics Linked Data API (ELDA). Recent presentations of work done with the Linked Vocabulary API as part of the CMSPV project have resulted in the API receiving growing interest from the broader scientific community. In this contribution we present the Linked Vocabulary API design and deployment process.

  20. An Implementation Model of Parlay MMCCS API Based on SIP

    Institute of Scientific and Technical Information of China (English)

    GUAN You-qing; SHEN Su-bin

    2006-01-01

    Parlay Multi Media Call Control Services(MMCCS) Application Programming Interfaces (API) based on Session Initiation Protocol (SIP) is essential for the implementation of Parlay Call Control (CC) API. This paper first proposes an implementation model of Parlay MMCCS API based on SIP, then presents a mapping between SIP and MMCCS API as far as methods and parameters are concerned, illustrates corresponding relationships between different components of SIP and MMCCS API by means of an application collaboration diagram, and finally presents an application using Java codes as well as some SIP messages. The application shows that a majority of MMCCS API based on SIP can be implemented and therefore verifies our mapping between MMCCS API and SIP.

  1. Population Genetics of Nosema apis and Nosema ceranae: One Host (Apis mellifera) and Two Different Histories.

    Science.gov (United States)

    Maside, Xulio; Gómez-Moracho, Tamara; Jara, Laura; Martín-Hernández, Raquel; De la Rúa, Pilar; Higes, Mariano; Bartolomé, Carolina

    2015-01-01

    Two microsporidians are known to infect honey bees: Nosema apis and Nosema ceranae. Whereas population genetics data for the latter have been released in the last few years, such information is still missing for N. apis. Here we analyze the patterns of nucleotide polymorphism at three single-copy loci (PTP2, PTP3 and RPB1) in a collection of Apis mellifera isolates from all over the world, naturally infected either with N. apis (N = 22) or N. ceranae (N = 23), to provide new insights into the genetic diversity, demography and evolution of N. apis, as well as to compare them with evidence from N. ceranae. Neutral variation in N. apis and N. ceranae is of the order of 1%. This amount of diversity suggests that there is no substantial differentiation between the genetic content of the two nuclei present in these parasites, and evidence for genetic recombination provides a putative mechanism for the flow of genetic information between chromosomes. The analysis of the frequency spectrum of neutral variants reveals a significant surplus of low frequency variants, particularly in N. ceranae, and suggests that the populations of the two pathogens are not in mutation-drift equilibrium and that they have experienced a population expansion. Most of the variation in both species occurs within honey bee colonies (between 62%-90% of the total genetic variance), although in N. apis there is evidence for differentiation between parasites isolated from distinct A. mellifera lineages (20%-34% of the total variance), specifically between those collected from lineages A and C (or M). This scenario is consistent with a long-term host-parasite relationship and contrasts with the lack of differentiation observed among host-lineages in N. ceranae (mellifera worldwide population is a recent event.

  2. Influencia del Calor Aportado y Metal de Aporte Sobre las Propiedades Mecánicas y la Microestructura de Juntas Soldadas por FCAW de Acero Microaleado de Alta Resistencia

    Directory of Open Access Journals (Sweden)

    César Marconi

    2015-06-01

    Full Text Available ResumenActualmente, los aceros microaleados son ampliamente utilizados en reemplazo de los aceros al C y C-Mn por sus ventajas en cuanto a propiedades mecánicas, resistencia a la corrosión y soldabilidad, permitiendo una reducción de peso de los vehículos y estructuras sin detrimento de su resistencia. Cuando estos aceros son soldados, el ciclo térmico de la soldadura provoca cambios microestructurales que modifican sus propiedades originales. El calor aportado (HI: heat input es una de las principales variables a tener en cuenta cuando se evalúan estas modificaciones. Las propiedades finales de la unión soldada también se definen por el tipo de consumible utilizado. El objetivo de este trabajo es analizar las propiedades mecánicas y la microestructura de juntas soldadas a tope de un acero microaleado con dos grados de metal de aporte y diferentes HI. Como resultado del trabajo se observó un aumento considerable de tamaño de grano en la ZAC adyacente a la línea de fusión para todas las condiciones, siendo este efecto más marcado cuando se soldó con alto HI; y un ablandamiento en la ZAC de grano fino. Prácticamente se mantuvieron los valores de resistencia a la tracción al soldar con ambos consumibles, con un mejor desempeño cuando se soldó con bajo HI. La tenacidad en la ZAC mejoró con la disminución del HI.

  3. Open Mobile API: Accessing the UICC on Android Devices

    OpenAIRE

    Roland, Michael; Hölzl, Michael

    2016-01-01

    This report gives an overview of secure element integration into Android devices. It focuses on the Open Mobile API as an open interface to access secure elements from Android applications. The overall architecture of the Open Mobile API is described and current Android devices are analyzed with regard to the availability of this API. Moreover, this report summarizes our efforts of reverse engineering the stock ROM of a Samsung Galaxy S3 in order to analyze the integration of the Open Mobile ...

  4. Privacy Issues of the W3C Geolocation API

    CERN Document Server

    Doty, Nick; Wilde, Erik

    2010-01-01

    The W3C's Geolocation API may rapidly standardize the transmission of location information on the Web, but, in dealing with such sensitive information, it also raises serious privacy concerns. We analyze the manner and extent to which the current W3C Geolocation API provides mechanisms to support privacy. We propose a privacy framework for the consideration of location information and use it to evaluate the W3C Geolocation API, both the specification and its use in the wild, and recommend some modifications to the API as a result of our analysis.

  5. Microstructure evaluation of UNS S32205 duplex stainless steel friction stir welds Avaliação microestrutural de juntas soldadas por atrito com pino não-consumível do aço inoxidável duplex UNS S32205

    Directory of Open Access Journals (Sweden)

    Tiago F. A. Santos

    2013-06-01

    Full Text Available UNS S32205 duplex stainless steel welds were performed by friction stir welding (FSW. Advancing and retreating sides showed distinct characteristics in the welded joint. The advancing side shows the strongest grain refinement which is corroborated by microhardness measurements. The microstructure characterization was carried out by optical, scanning and transmission electron microscopy. The thermomechanically affected zone displays austenite islands deformed in a ferrite matrix. The stir zone (SZ showed a fine recrystallized microstructure providing an outstanding increase of hardness associated with better corrosion performance. Transmission electron microscopy and corrosion tests have corroborated the absence of intermetallic phases on welded joints.Juntas soldadas por atrito com pino foram obtidas para o aço inoxidável duplex UNS S32205. Os lados de avanço e retrocesso da junta soldada evidenciaram diferentes características microestruturais, o lado de avanço apresentou um maior grau de refinamento de grãos, principal mecanismo de aumento de dureza. A caracterização microestrutural foi realizada através de microscopia ótica, eletrônica de varredura e de transmissão. A zona termomecanicamente afetada apresentou ilhas de austenita deformadas em matriz ferrítica. A zona misturada apresentou uma microestrutura fina completamente recristalizada, permitindo um impressionante aumento de dureza, na junta soldada associado a uma melhoria na resistência à corrosão. Avaliações por microscopia eletrônica de transmissão e ensaios de corrosão corroboraram para a ausência de fases secundárias deletérias na junta soldada.

  6. Beebread from Apis mellifera and Apis dorsata. Comparative Chemical Composition and Bioactivity

    Directory of Open Access Journals (Sweden)

    Otilia BOBIS

    2017-05-01

    Full Text Available Beebread is a valuable bee product, both for bee nutrition and for humans. The high nutritional and bioactive properties of beebread were evaluated by chemical composition analysis of beebread from Apis mellifera and Apis dorsata. Bee bread harvested from Romania and India, coming from Apis mellifera and Apis dorsata bees, were evaluated for their chemical composition. Analyses were made in APHIS Laboratory from USAMV Cluj, using validated methods for bee products. Lipids were determined by the Soxhlet extraction method, total protein content was determined by Kjehldahl method, sugar spectrum was determined by high performance liquid chromatography with refractive index detection (HPLC-IR. Water content of beebread samples were situated between 11.45 and 16.46%, total protein content between 16.84 and 19.19% and total lipids between 6.36 and 13.47%.  Beebread has high bioactive properties which can be expressed as antioxidant and/or antibacterial activity. Chemical composition and bioactive properties of beebread is influenced by floral origin of the pollen which the bees collect and place in combs for fermentation. Also the climatic conditions have an important role in developing different fermentation compounds, that may act as antioxidants or antibacterial agents.

  7. Adaptive runtime for a multiprocessing API

    Energy Technology Data Exchange (ETDEWEB)

    Antao, Samuel F.; Bertolli, Carlo; Eichenberger, Alexandre E.; O' Brien, John K.

    2016-10-11

    A computer-implemented method includes selecting a runtime for executing a program. The runtime includes a first combination of feature implementations, where each feature implementation implements a feature of an application programming interface (API). Execution of the program is monitored, and the execution uses the runtime. Monitor data is generated based on the monitoring. A second combination of feature implementations are selected, by a computer processor, where the selection is based at least in part on the monitor data. The runtime is modified by activating the second combination of feature implementations to replace the first combination of feature implementations.

  8. Adaptive runtime for a multiprocessing API

    Energy Technology Data Exchange (ETDEWEB)

    Antao, Samuel F.; Bertolli, Carlo; Eichenberger, Alexandre E.; O' Brien, John K.

    2016-11-15

    A computer-implemented method includes selecting a runtime for executing a program. The runtime includes a first combination of feature implementations, where each feature implementation implements a feature of an application programming interface (API). Execution of the program is monitored, and the execution uses the runtime. Monitor data is generated based on the monitoring. A second combination of feature implementations are selected, by a computer processor, where the selection is based at least in part on the monitor data. The runtime is modified by activating the second combination of feature implementations to replace the first combination of feature implementations.

  9. Rare royal families in honeybees, Apis mellifera

    Science.gov (United States)

    Moritz, Robin F. A.; Lattorff, H. Michael G.; Neumann, Peter; Kraus, F. Bernhard; Radloff, Sarah E.; Hepburn, H. Randall

    2005-10-01

    The queen is the dominant female in the honeybee colony, Apis mellifera, and controls reproduction. Queen larvae are selected by the workers and are fed a special diet (royal jelly), which determines caste. Because queens mate with many males a large number of subfamilies coexist in the colony. As a consequence, there is a considerable potential for conflict among the subfamilies over queen rearing. Here we show that honeybee queens are not reared at random but are preferentially reared from rare “royal” subfamilies, which have extremely low frequencies in the colony's worker force but a high frequency in the queens reared.

  10. Interfacing RASCAL with Java APIs. Automated mapping with Apache POI

    NARCIS (Netherlands)

    Marmanidis, G.

    2013-01-01

    Interfacing RASCAL with Java APIs and reusing existing implementations is a required functionality in order to reduce effort and time in contrast with implementing a new one from scratch. In this study we are trying to interface RASCAL with Apache POI, a Java implemented API in order to import and a

  11. grlc Makes GitHub Taste Like Linked Data APIs

    NARCIS (Netherlands)

    Meroño-Peñuela, A.; Hoekstra, Rinke; Sack, H; Rizzo, G; Steinmetz, N; Mladenić, D; Auer, S; Lange, C

    2016-01-01

    Building Web APIs on top of SPARQL endpoints is becoming a common practice to enable universal access to the integration favorable dataspace of Linked Data. However, the Linked Data community cannot expect users to learn SPARQL to query this dataspace, and Web APIs are the most extended way of enabl

  12. API and CPTDC Jointly Promote Chinese Enterprises to Go Abroad

    Institute of Scientific and Technical Information of China (English)

    Li Chunhui

    2005-01-01

    @@ In order to push the certification forward and help more Chinese enterprises to go abroad, API (American Petroleum Institute) and CPTDC (China Petroleum Technology & Development Corporation) jointly held a meeting between March 4 and 8, 2004, to promote API certification of Chinese enterprises.

  13. Experience API: Flexible, Decentralized and Activity-Centric Data Collection

    Science.gov (United States)

    Kevan, Jonathan M.; Ryan, Paul R.

    2016-01-01

    This emerging technology report describes the Experience API (xAPI), a new e-learning specification designed to support the learning community in standardizing and collecting both formal and informal distributed learning activities. Informed by Activity Theory, a framework aligned with constructivism, data is collected in the form of activity…

  14. API E MIELE NEL MEDITERRANEO ANTICO

    Directory of Open Access Journals (Sweden)

    Matteo Bormetti

    2014-09-01

    Full Text Available L’importanza del miele come sostanza culturalmente ed economicamente rilevante nel mondo antico non è stata ancora del tutto indagata. Il miele e le api sono nondimeno presenze assidue e trasversali ai generi e alle tipologie di fonti antiche greche e romane, ed è pertanto da esse che una ricerca sull’argomento deve partire. I manufatti, le tecniche e i concetti descritti dagli antichi devono però essere relazionati con cautela al materiale archeologico rinvenuto, per fare ciò pare indispensabile un approccio che tenga conto delle nozioni biologiche, etologiche e zootecniche di base. Attraverso quest’ottica sono state ricapitolate le evidenze materiali provenienti dal bacino del Mediterraneo e concernenti gli strumenti e le strutture relative all’apicoltura, dalle arnie agli apiari, peril lungo arco cronologico che va dall’età del bronzo alla tarda antichità. Ciò è possibile per la tematica apicola grazie alla conservatività delle tecniche, strettamente legate ai severi dettami della natura fino alla rivoluzione ottocentesca delle arnie razionali a telai mobili del reverendo Langstroth. Sono inoltre analizzati gli utilizzi più frequenti del miele per come descritti dalle fonti letterarie nonché le implicazioni di api e miele nella ritualità e nel simbolismo della morte, del genere e della regalità, sebbene i risultati siano scarsi data la povertà dei riscontri archeologici e la limitata attenzione di cui questo argomento ha fin ora goduto.

  15. Investigating an API for resilient exascale computing.

    Energy Technology Data Exchange (ETDEWEB)

    Stearley, Jon R.; Tomkins, James; VanDyke, John P.; Ferreira, Kurt Brian; Laros, James H.,; Bridges, Patrick

    2013-05-01

    Increased HPC capability comes with increased complexity, part counts, and fault occurrences. In- creasing the resilience of systems and applications to faults is a critical requirement facing the viability of exascale systems, as the overhead of traditional checkpoint/restart is projected to outweigh its bene ts due to fault rates outpacing I/O bandwidths. As faults occur and propagate throughout hardware and software layers, pervasive noti cation and handling mechanisms are necessary. This report describes an initial investigation of fault types and programming interfaces to mitigate them. Proof-of-concept APIs are presented for the frequent and important cases of memory errors and node failures, and a strategy proposed for lesystem failures. These involve changes to the operating system, runtime, I/O library, and application layers. While a single API for fault handling among hardware and OS and application system-wide remains elusive, the e ort increased our understanding of both the mountainous challenges and the promising trailheads. 3

  16. Coming 5th Edition of the API Standard 618: major changes compared to the API 618, 4th edition

    NARCIS (Netherlands)

    Pyle, A.; Eijk, A.; Elferink, H.

    2003-01-01

    This paper will present the highlights of changes that will be found in the 5th Edition of API 618, which is expected to be published in late 2003 or early 2004. Approximately every 5 years the API Standards are revised in such a way that the latest field experiences and proven designs are included

  17. Comparison of learning and memory of Apis cerana and Apis mellifera.

    Science.gov (United States)

    Qin, Qiu-Hong; He, Xu-Jiang; Tian, Liu-Qing; Zhang, Shao-Wu; Zeng, Zhi-Jiang

    2012-10-01

    The honeybee is an excellent model organism for research on learning and memory among invertebrates. Learning and memory in honeybees has intrigued neuroscientists and entomologists in the last few decades, but attention has focused almost solely on the Western honeybee, Apis mellifera. In contrast, there have been few studies on learning and memory in the Eastern honeybee, Apis cerana. Here we report comparative behavioral data of color and grating learning and memory for A. cerana and A. mellifera in China, gathered using a Y-maze apparatus. We show for the first time that the learning and memory performance of A. cerana is significantly better on both color and grating patterns than that of A. mellifera. This study provides the first evidence of a learning and memory difference between A. cerana and A. mellifera under controlled conditions, and it is an important basis for the further study of the mechanism of learning and memory in honeybees.

  18. EKSPLORASI AKTINOMISET SEBAGAI PENGHASIL ANTIBIOTIKA DARI TANAH MANGROVE Sonneratia caseolaris DI TANJUNG API API

    Directory of Open Access Journals (Sweden)

    Awalul Fatiqin

    2015-08-01

    Full Text Available Actinomycetes are soil organisms that have traits that are common to bacteria and fungi but also have quite different characteristics that limit into one group which is distinctly different. Study aimed to explore the mangrove actinomycetes from soil and tested the antibacterial potency. Soil samples taken from the mangrove land at Tanjung Api-api mangrove species Sonneratia caseolaris. Activity test antibacterial using a method modified disk a test bacterium Escherichia coli. Identification isolates of actinomycetes by observing the character of macroscopic colonies, microscopic conidia. The results showed that the obtained three different actinomycetes isolates, 1 isolate has the most potential ability to inhibit bacterial growth test with an average value of 1:13 cm in inhibiting the bacteria Escherichia coli.

  19. Avaliação do efeito da energia de soldagem sobre as tensões residuais resultantes em juntas soldadas com multipasse Welding energy input evaluation on the final residual stresses in multipass welded joints

    Directory of Open Access Journals (Sweden)

    George Luiz Gomes de Oliveira

    2010-09-01

    Full Text Available A energia de soldagem pode ser ajustada tanto por meio do controle da potência (tensão e corrente de soldagem quanto por meio da velocidade de soldagem. Tais formas de ajustes modificam os efeitos da energia de soldagem sobre a junta, o que pode influenciar de forma distinta as tensões residuais resultantes na mesma. Desta forma, o objetivo deste trabalho é avaliar o efeito da energia de soldagem, considerando seu ajuste através da alteração individual e independente da corrente e da velocidade de soldagem, sobre as tensões residuais resultantes em juntas soldadas com multipasse. Foram empregadas amostras de aço estrutural chanfradas em meio-v e soldadas utilizando eletrodo revestido. Aplicaram-se três energias de soldagem obtidas por meio de três níveis distintos de corrente e de velocidade de soldagem. As amostras foram levadas a um difratômetro de raios-x portátil onde foram levantados os perfis de tensões residuais na superfície das mesmas. Uma verificação importante foi que diferentes parâmetros de soldagem que resultam em aportes térmicos "iguais", geram níveis diferentes de tensões residuais, ou seja, a energia de soldagem não pode ser considerada de forma isolada em análises de níveis de tensões residuais resultantes da soldagem multipasse.The energy input in welding can be adjusted by either control of welding power (voltage and welding current or welding speed. These different ways of changing can result in different residual stress profiles in the welded joint. Then, the aim of this work is to evaluate, in an independent way, the welding energy input, current and speed effect on the final residual stresses of a multipass joint. Semi-v chamfered samples of structural steel and SMAW process was used. Three different levels of welding current and speed was employed in order to get three levels of energy input. The residual stress measurement was accomplished through X-ray diffraction, using a minidiffractometer

  20. Compositional mining of multiple object API protocols through state abstraction.

    Science.gov (United States)

    Dai, Ziying; Mao, Xiaoguang; Lei, Yan; Qi, Yuhua; Wang, Rui; Gu, Bin

    2013-01-01

    API protocols specify correct sequences of method invocations. Despite their usefulness, API protocols are often unavailable in practice because writing them is cumbersome and error prone. Multiple object API protocols are more expressive than single object API protocols. However, the huge number of objects of typical object-oriented programs poses a major challenge to the automatic mining of multiple object API protocols: besides maintaining scalability, it is important to capture various object interactions. Current approaches utilize various heuristics to focus on small sets of methods. In this paper, we present a general, scalable, multiple object API protocols mining approach that can capture all object interactions. Our approach uses abstract field values to label object states during the mining process. We first mine single object typestates as finite state automata whose transitions are annotated with states of interacting objects before and after the execution of the corresponding method and then construct multiple object API protocols by composing these annotated single object typestates. We implement our approach for Java and evaluate it through a series of experiments.

  1. The pheromones of laying workers in two honeybee sister species: Apis cerana and Apis mellifera.

    Science.gov (United States)

    Tan, Ken; Yang, Mingxian; Wang, Zhengwei; Radloff, Sarah E; Pirk, Christian W W

    2012-04-01

    When a honeybee colony loses its queen, workers activate their ovaries and begin to lay eggs. This is accompanied by a shift in their pheromonal bouquet, which becomes more queen like. Workers of the Asian hive bee Apis cerana show unusually high levels of ovary activation and this can be interpreted as evidence for a recent evolutionary arms race between queens and workers over worker reproduction in this species. To further explore this, we compared the rate of pheromonal bouquet change between two honeybee sister species of Apis cerana and Apis mellifera under queenright and queenless conditions. We show that in both species, the pheromonal components HOB, 9-ODA, HVA, 9-HDA, 10-HDAA and 10-HDA have significantly higher amounts in laying workers than in non-laying workers. In the queenright colonies of A. mellifera and A. cerana, the ratios (9-ODA)/(9-ODA + 9-HDA + 10-HDAA + 10-HDA) are not significantly different between the two species, but in queenless A. cerana colonies the ratio is significant higher than in A. mellifera, suggesting that in A. cerana, the workers' pheromonal bouquet is dominated by the queen compound, 9-ODA. The amount of 9-ODA in laying A. cerana workers increased by over 585% compared with the non-laying workers, that is 6.75 times higher than in A. mellifera where laying workers only had 86% more 9-ODA compared with non-laying workers.

  2. Building Hypermedia APIs with HTML5 and Node

    CERN Document Server

    Amundsen, Mike

    2011-01-01

    With this concise book, you'll learn the art of building hypermedia APIs that don't simply run on the Web, but that actually exist in the Web. You'll start with the general principles and technologies behind this architectural approach, and then dive hands-on into three fully-functional API examples. Too many APIs rely on concepts rooted in desktop and local area network patterns that don't scale well-costly solutions that are difficult to maintain over time. This book shows system architects and web developers how to design and implement human- and machine-readable web services that remain

  3. Cálculo de tensiones en uniones soldadas con costuras de filete asimétricas sometidas a flexión. // Bending shear stresses calculation in welded joints with asymmetric welding fillets.

    Directory of Open Access Journals (Sweden)

    H. Hernández Herrera

    2004-09-01

    Full Text Available En el trabajo se presenta el cálculo de las tensiones de cortante en la sección de la garganta para las uniones soldadassometidas a flexión con costuras de filete de sección transversal asimétrica cuando el plano de carga no pasa por el centrode flexión o no coincide con los ejes centroidales principales de inercia. Los resultados obtenidos por las expresiones decálculo propuestas se comparan con los obtenidos por el Método de los Elementos Finitos demostrando de esta manera lavalidez de las mismas.Palabras claves: Flexión, uniones soldadas, soldadura de filete.___________________________________________________________________________Abstract.In this paper is presented the bending shear stresses calculation in the throat area for asymmetric welded joints with filletweldings, when the load plane does not go by the flexion center or it do not coincide with the mains inertia centroidal axes.The results obtained by the proposed expressions are compared with those obtained by the Finite Elements Methoddemonstrating by this way the validity of the same ones.Key words: Bending, welded joints, fillet weldings.

  4. Influencia de la deformación plástica en probetas soldadas de la aleación de aluminio 6061-T6 sobre las características de dureza

    Directory of Open Access Journals (Sweden)

    Jaime Torres Salcedo

    2008-01-01

    Full Text Available El propósito de este artículo es estudiar el efecto del tiempo y el esfuerzo de compresión sobre la resistencia a la tensión y el perfil de microdureza en la aleación de aluminio 6061-T6 después de ser soldada con el proceso GMAW. Las principales herramientas usadas para lograr este objetivo fueron el micrómetro Vickers, el microscopio electrónico de transmisión, el calorímetro diferencial de barrido y el microscopio óptico. Se encontró que con un tiempo de envejecimiento natural de cuatro años los valores de microdureza fueron claramente incrementados, mientras que con el esfuerzo de compresión esos valores mostraron un pequeño incremento. Sin embargo, los perfiles de dureza más estables encontrados en las muestras fueron atribuidos al tratamiento de compresión.

  5. Pathogen detection and gut bacteria identification in Apis cerana ...

    African Journals Online (AJOL)

    acer

    Interestingly, Bifidobacterium species, Lactobacillus species, Bacillus species, .... DNA and RNA extraction. DNA from ... DNA from P. larvae spore which was used as a positive ...... larvae and Ascosphaera apis by Bacillus subtilis isolated from.

  6. Practical Implementation of 10 Rules for Writing REST APIs

    Directory of Open Access Journals (Sweden)

    Jiri Hradil

    2017-01-01

    Full Text Available This paper shows a practical implementation of “10 Rules for Writing REST APIs introduced in the article” (Hradil, 2016. The application is done in Invoice Home (Wikilane, 2016, an invoicing web application for small business and entrepreneurs available world-wide. The API is implemented in JSON hypermedia format (ECMA International, 2016 and with Ruby on Rails framework (Hansson, 2016. The main purpose of the API is to allow connection of Invoice Home with external systems and offer Invoice Home data in simpler format compared to the current HTML format of the full-stack web application. The paper could be also used as a basic template or pattern for any other implementation of the JSON API in any web-based application.

  7. Article original Agronomy Foraging behaviour of Apis mellifera ...

    African Journals Online (AJOL)

    Hilaire

    Foraging behaviour of Apis mellifera adansonii and its impact on pollination, fruit and .... temperature is about 25°C. ... area before November 15, sugar baby variety of ... abundance, direct observations of the foraging ..... 4 Cane J.H., 2002.

  8. Pengaruh Busur Api Terhadap Kekuatan Dielektrik Gas SF6

    OpenAIRE

    Jhony

    2011-01-01

    Bahan isolasi gas yang sering digunakan adalah gas SF6. Sifat –sifat dari gas SF6 ini tidak berwarna, tidak beracun, tidak berbau. Salah satu pemanfaatan dari gas SF6 ini sebagai bahan isolasi adalah pada pemutus tenaga (circuit breaker). Jika pemutus tenaga SF6 membuka, maka pada sela kontaknya akan terjadi busur api. Busur api akan menaikkan temperatur gas SF6 sehingga ada dugaan gas SF6 mengalami perubahan struktur kimia, sehingga sifat listriknya berubah. Tugas akhir ini ak...

  9. Drone competition at drone congregation areas in four Apis species

    OpenAIRE

    2005-01-01

    International audience; In Apis mellifera the estimated average number of drones visiting a drone congregation area (DCA) was 11 750 + 2 145. Drones of the species Apis cerana, A. koschevnikovi, A. dorsata and A. mellifera, which pursued a queen dummy moving in circular course, flew in a comet shaped formation. Median numbers of drones in a comet ranged from 9 drones (A. koschevnikovi) to 31 drones (A. mellifera). In none of the species we observed aggression between drones. Drone density beh...

  10. GIANT API: an application programming interface for functional genomics

    Science.gov (United States)

    Roberts, Andrew M.; Wong, Aaron K.; Fisk, Ian; Troyanskaya, Olga G.

    2016-01-01

    GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu. PMID:27098035

  11. Mining Effective Temporal Specifications from Heterogeneous API Data

    Institute of Scientific and Technical Information of China (English)

    Qian Wu; Guang-Tai Liang; Qian-Xiang Wang; Hong Mei

    2011-01-01

    Temporal specifications for Application Programming Interfaces (APIs) serve as an important basis for many defect detection tools.As these specifications are often not well documented,various approaches have been proposed to automatically mine specifications typically from API library source code or from API client programs.However,the library-based approaches take substantial computational resources and produce rather limited useful specifications,while the client-based approaches suffer from high false positive rates.To address the issues of existing approaches,we propose a novel specification miniug approach,called MineHEAD,which exploits heterogeneous API data,including information from API client programs as well as API library source code and comments,to produce effective specifications for defect detection with low cost.In particular,MineHEAD first applies client-based specification mining to produce a collection of candidate specifications,and then exploits the related library source code and comments to identify and refine the real specifications from the candidates.Our evaluation results on nine open source projects show that MineHEAD produces effective specifications with average precision of 97.2%.

  12. GIANT API: an application programming interface for functional genomics.

    Science.gov (United States)

    Roberts, Andrew M; Wong, Aaron K; Fisk, Ian; Troyanskaya, Olga G

    2016-07-08

    GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu.

  13. Identification of Complete Repertoire of Apis florea Odorant Receptors Reveals Complex Orthologous Relationships with Apis mellifera.

    Science.gov (United States)

    Karpe, Snehal D; Jain, Rikesh; Brockmann, Axel; Sowdhamini, Ramanathan

    2016-09-26

    We developed a computational pipeline for homology based identification of the complete repertoire of olfactory receptor (OR) genes in the Asian honey bee species, Apis florea Apis florea is phylogenetically the most basal honey bee species and also the most distant sister species to the Western honey bee Apis mellifera, for which all OR genes had been identified before. Using our pipeline, we identified 180 OR genes in A. florea, which is very similar to the number of ORs identified in A. mellifera (177 ORs). Many characteristics of the ORs including gene structure, synteny of tandemly repeated ORs and basic phylogenetic clustering are highly conserved. The composite phylogenetic tree of A. florea and A. mellifera ORs could be divided into 21 clades which are in harmony with the existing Hymenopteran tree. However, we found a few nonorthologous OR relationships between both species as well as independent pseudogenization of ORs suggesting separate evolutionary changes. Particularly, a subgroup of the OR gene clade XI, which had been hypothesized to code cuticular hydrocarbon receptors showed a high number of species-specific ORs RNAseq analysis detected a total number of 145 OR transcripts in male and 162 in female antennae. Most of the OR genes were highly expressed on the female antennae. However, we detected five distinct male-biased OR genes, out of which three genes (AfOr11, AfOr18, AfOr170P) were shown to be male-biased in A. mellifera, too, thus corroborating a behavioral function in sex-pheromone communication.

  14. Variance in spermatozoa number among Apis dorsata drones and among Apis mellifera drones

    OpenAIRE

    Koeniger, Gudrun; KOENIGER, Nikolaus; Tingek, Salim; Phiancharoen, Mananya

    2005-01-01

    International audience; Published estimates of the mean spermatozoa numbers for Apis dorsata drones vary from 1.2 × 106 and 2.4 × 106; the number of spermatozoa per individual drone vary from 0.22 × 106 to 2.65 × 106. Counts presented here revealed 1.19 × 106 + 0.25 × 106 spermatozoa in drones sampled near a colony and 1.59 × 106 + 0.18 × 106 in drones sampled at a drone congregation area (DCA) in Sabah, Borneo. The difference between the two sites is significant. Further, the degree of varia...

  15. Uma breve revisão histórica do desenvolvimento da soldagem dos aços API para tubulações A brief history review of development on API steels welding for pipeline

    Directory of Open Access Journals (Sweden)

    Jaime Casanova Soeiro Junior

    2013-06-01

    Full Text Available Este trabalho enfoca o desenvolvimento dos aços API para tubulações desde o aço API 5L X42, desenvolvido em 1948, através de laminação a quente seguida de tratamento térmico. Desde então foram feitos diferentes desenvolvimentos visando aumentar a resistência mecânica e a tenacidade, além de melhorar a soldabilidade. Entre eles, a adição de elementos de liga, produzindo os aços ARBL e a utilização de rotas de processamento termomecânico durante a laminação. Inicialmente a rota utilizada era a laminação a quente controlada (TMCR, com utilização de elemento microligante como Nb para os aços X60 e o conjunto Nb e V para os aços X65 e X70, associado a uma redução do teor de carbono. Posteriormente foi implantada a rota de fabricação do aço por laminação controlada seguida de resfriamento controlado (TMCP, com redução de carbono e adição de Nb e Ti para os aços X80, e adições de Mo, Nb, Be Ti para os X100. A redução do carbono foi motivada também para melhorar a sua soldabilidade e, por este motivo, estes aços são soldados por diferentes processos de soldagem, como o eletrodo revestido. Desenvolvimentos recentes com raiz feita com MAG-TC e enchimento com arame tubular tem dado resultados animadores.This paper is a brief history on the development of pipelines steels since the API 5L X42 steel, developed in 1948 by hot rolling followed by heat treatment. Subsequently different developments were made to increase the strength and toughness of these materials, and to improve their weldability. Among them, the addition of microalloying elements, producing HSLA steels and thermomechanical processing routes during hot rolling. Initially the route used was the controlled hot rolling (TMCR, together with microalloying element such as Nb for X60 steel and Nb plus V for X65 and X70 steels, associated with a reduction in carbon content. Later, the thermomechanical controlled process (TMCP manufacturing route was

  16. The Apis mellifera Filamentous Virus Genome

    Directory of Open Access Journals (Sweden)

    Laurent Gauthier

    2015-07-01

    Full Text Available A complete reference genome of the Apis mellifera Filamentous virus (AmFV was determined using Illumina Hiseq sequencing. The AmFV genome is a double stranded DNA molecule of approximately 498,500 nucleotides with a GC content of 50.8%. It encompasses 247 non-overlapping open reading frames (ORFs, equally distributed on both strands, which cover 65% of the genome. While most of the ORFs lacked threshold sequence alignments to reference protein databases, twenty-eight were found to display significant homologies with proteins present in other large double stranded DNA viruses. Remarkably, 13 ORFs had strong similarity with typical baculovirus domains such as PIFs (per os infectivity factor genes: pif-1, pif-2, pif-3 and p74 and BRO (Baculovirus Repeated Open Reading Frame. The putative AmFV DNA polymerase is of type B, but is only distantly related to those of the baculoviruses. The ORFs encoding proteins involved in nucleotide metabolism had the highest percent identity to viral proteins in GenBank. Other notable features include the presence of several collagen-like, chitin-binding, kinesin and pacifastin domains. Due to the large size of the AmFV genome and the inconsistent affiliation with other large double stranded DNA virus families infecting invertebrates, AmFV may belong to a new virus family.

  17. Magnetoreception system in honeybees (Apis mellifera.

    Directory of Open Access Journals (Sweden)

    Chin-Yuan Hsu

    Full Text Available Honeybees (Apis mellifera undergo iron biomineralization, providing the basis for magnetoreception. We showed earlier the presence of superparamagnetic magnetite in iron granules formed in honeybees, and subscribed to the notion that external magnetic fields may cause expansion or contraction of the superparamagnetic particles in an orientation-specific manner, relaying the signal via cytoskeleton (Hsu and Li 1994. In this study, we established a size-density purification procedure, with which quantitative amount of iron granules was obtained from honey bee trophocytes and characterized; the density of iron granules was determined to be 1.25 g/cm(3. While we confirmed the presence of superparamagnetic magnetite in the iron granules, we observed changes in the size of the magnetic granules in the trophycytes upon applying additional magnetic field to the cells. A concomitant release of calcium ion was observed by confocal microscope. This size fluctuation triggered the increase of intracellular Ca(+2 , which was inhibited by colchicines and latrunculin B, known to be blockers for microtubule and microfilament syntheses, respectively. The associated cytoskeleton may thus relay the magnetosignal, initiating a neural response. A model for the mechanism of magnetoreception in honeybees is proposed, which may be applicable to most, if not all, magnetotactic organisms.

  18. Honeybee (Apis mellifera ligustica) drone embryo proteomes.

    Science.gov (United States)

    Li, Jianke; Fang, Yu; Zhang, Lan; Begna, Desalegn

    2011-03-01

    Little attention has been paid to the drone honeybee (Apis mellifera ligustica) which is a haploid individual carrying only the set of alleles that it inherits from its mother. Molecular mechanisms underlying drone embryogenesis are poorly understood. This study evaluated protein expression profiles of drone embryogenesis at embryonic ages of 24, 48 and 72h. More than 100 reproducible proteins were analyzed by mass spectrometry on 2D electrophoresis gels. Sixty-two proteins were significantly changed at the selected three experimental age points. Expression of the metabolic energy requirement-related protein peaked at the embryonic age of 48h, whereas development and metabolizing amino acid-related proteins expressed optimally at 72h. Cytoskeleton, protein folding and antioxidant-related proteins were highly expressed at 48 and 72h. Protein networks of the identified proteins were constructed and protein expressions were validated at the transcription level. This first proteomic study of drone embryogenesis in the honeybee may provide geneticists an exact timetable and candidate protein outline for further manipulations of drone stem cells.

  19. The Apis mellifera Filamentous Virus Genome.

    Science.gov (United States)

    Gauthier, Laurent; Cornman, Scott; Hartmann, Ulrike; Cousserans, François; Evans, Jay D; de Miranda, Joachim R; Neumann, Peter

    2015-07-09

    A complete reference genome of the Apis mellifera Filamentous virus (AmFV) was determined using Illumina Hiseq sequencing. The AmFV genome is a double stranded DNA molecule of approximately 498,500 nucleotides with a GC content of 50.8%. It encompasses 247 non-overlapping open reading frames (ORFs), equally distributed on both strands, which cover 65% of the genome. While most of the ORFs lacked threshold sequence alignments to reference protein databases, twenty-eight were found to display significant homologies with proteins present in other large double stranded DNA viruses. Remarkably, 13 ORFs had strong similarity with typical baculovirus domains such as PIFs (per os infectivity factor genes: pif-1, pif-2, pif-3 and p74) and BRO (Baculovirus Repeated Open Reading Frame). The putative AmFV DNA polymerase is of type B, but is only distantly related to those of the baculoviruses. The ORFs encoding proteins involved in nucleotide metabolism had the highest percent identity to viral proteins in GenBank. Other notable features include the presence of several collagen-like, chitin-binding, kinesin and pacifastin domains. Due to the large size of the AmFV genome and the inconsistent affiliation with other large double stranded DNA virus families infecting invertebrates, AmFV may belong to a new virus family.

  20. Caracterização microestrutural e comportamento mecânico das ligas de alumínio AA2139 T3 e T8 soldadas por fricção rotativa com mistura Microstructural characterization and mechanical behavior of an AA2139 T3 and T8 aluminum alloy joined by friction stir welding (FSW

    Directory of Open Access Journals (Sweden)

    Vinícius Toledo Saccon

    2010-12-01

    Full Text Available Este trabalho visou analisar a caracterização microestrutural e o comportamento mecânico das ligas de alumínio AA2139 T3 e T8 quando são soldadas pelo processo Soldagem por Fricção Rotativa com Mistura, o qual é realizado na fase sólida. A análise microestrutural foi realizada utilizando microscopia óptica e eletrônica de varredura, e o comportamento mecânico foi avaliado através de medidas de microdureza e ensaio de tração convencional complementado pelo sistema ARAMIS. As ligas foram soldadas nos mesmos parâmetros de soldagem e com a mesma ferramenta, a fim de avaliar a qualidade da junta soldada para as duas condições de tratamento térmico, T3 e T8. Os resultados obtidos mostraram soldas resistentes para ambos os tratamentos térmicos, porém com melhores propriedades mecânicas para a liga AA2139 T3.This work aimed to study the microstructural characterization and mechanical behavior of AA2139 T3 and T8 aluminum alloys joined by FSW - Friction Stir Welding. The microstructural analysis has been done using optical microscope and scanning electron microscopy, and the mechanical analysis were evaluate through microhardness testing and conventional tensile test using the ARAMIS system . Each alloy were welded using the same welding parameters and the same tool in order to evaluate the joint quality for both heat treatment used for this work, T3 and T8. The result showed sounds joints for both heat treatments, although with better mechanical properties for the alloy AA2139 T3.

  1. Spiroplasma apis, a new species from the honey-bee Apis mellifera.

    Science.gov (United States)

    Mouches, C; Bové, J M; Tully, J G; Rose, D L; McCoy, R E; Carle-Junca, P; Garnier, M; Saillard, C

    1983-01-01

    Two spiroplasma strains (B31 and B39) recovered from diseased honey-bees (Apis mellifera) in southwestern France were similar in biochemical, serological and pathological properties. The organisms grew at 30 degrees C, required cholesterol for growth, fermented glucose, catabolized arginine and produced a film and spot reaction. The two spiroplasmas were serologically indistinguishable but were related to serogroup IV spiroplasmas, which had been previously isolated from flower surfaces and from insects. The isolates were distinct from the three previously established species of Spiroplasma and from other presently known serogroups. The G + C content of the DNA from strain B31 was 30 +/- 1 mol %. Both B31 and B39 strains were associated with a lethal infection ("May disease") of the honey-bee. On the basis of the characterization presented here, it is proposed that these spiroplasmal pathogens of bees and allied strains be classified as a new species, Spiroplasma apis, the type strain of which is B31 (ATCC 33834).

  2. Inhibiting DNA methylation alters olfactory extinction but not acquisition learning in Apis cerana and Apis mellifera.

    Science.gov (United States)

    Gong, Zhiwen; Wang, Chao; Nieh, James C; Tan, Ken

    2016-07-01

    DNA methylation plays a key role in invertebrate acquisition and extinction memory. Honey bees have excellent olfactory learning, but the role of DNA methylation in memory formation has, to date, only been studied in Apis mellifera. We inhibited DNA methylation by inhibiting DNA methyltransferase (DNMT) with zebularine (zeb) and studied the resulting effects upon olfactory acquisition and extinction memory in two honey bee species, Apis cerana and A. mellifera. We used the proboscis extension reflex (PER) assay to measure memory. We provide the first demonstration that DNA methylation is also important in the olfactory extinction learning of A. cerana. DNMT did not reduce acquisition learning in either species. However, zeb bidirectionally and differentially altered extinction learning in both species. In particular, zeb provided 1h before acquisition learning improved extinction memory retention in A. mellifera, but reduced extinction memory retention in A. cerana. The reasons for these differences are unclear, but provide a basis for future studies to explore species-specific differences in the effects of methylation on memory formation.

  3. A quick guide to API 510 certified pressure vessel inspector syllabus example questions and worked answers

    CERN Document Server

    Matthews, Clifford

    2010-01-01

    The API Individual Certification Programs (ICPs) are well established worldwide in the oil, gas, and petroleum industries. This Quick Guide is unique in providing simple, accessible and well-structured guidance for anyone studying the API 510 Certified Pressure Vessel Inspector syllabus by summarizing and helping them through the syllabus and providing multiple example questions and worked answers.Technical standards are referenced from the API 'body of knowledge' for the examination, i.e. API 510 Pressure vessel inspection, alteration, rerating; API 572 Pressure vessel inspection; API

  4. A knowledge discovery object model API for Java

    Directory of Open Access Journals (Sweden)

    Jones Steven JM

    2003-10-01

    Full Text Available Abstract Background Biological data resources have become heterogeneous and derive from multiple sources. This introduces challenges in the management and utilization of this data in software development. Although efforts are underway to create a standard format for the transmission and storage of biological data, this objective has yet to be fully realized. Results This work describes an application programming interface (API that provides a framework for developing an effective biological knowledge ontology for Java-based software projects. The API provides a robust framework for the data acquisition and management needs of an ontology implementation. In addition, the API contains classes to assist in creating GUIs to represent this data visually. Conclusions The Knowledge Discovery Object Model (KDOM API is particularly useful for medium to large applications, or for a number of smaller software projects with common characteristics or objectives. KDOM can be coupled effectively with other biologically relevant APIs and classes. Source code, libraries, documentation and examples are available at http://www.bcgsc.ca/bioinfo/software.

  5. Thermodynamic phase behavior of API/polymer solid dispersions.

    Science.gov (United States)

    Prudic, Anke; Ji, Yuanhui; Sadowski, Gabriele

    2014-07-07

    To improve the bioavailability of poorly soluble active pharmaceutical ingredients (APIs), these materials are often integrated into a polymer matrix that acts as a carrier. The resulting mixture is called a solid dispersion. In this work, the phase behaviors of solid dispersions were investigated as a function of the API as well as of the type and molecular weight of the carrier polymer. Specifically, the solubility of artemisinin and indomethacin was measured in different poly(ethylene glycol)s (PEG 400, PEG 6000, and PEG 35000). The measured solubility data and the solubility of sulfonamides in poly(vinylpyrrolidone) (PVP) K10 and PEG 35000 were modeled using the perturbed-chain statistical associating fluid theory (PC-SAFT). The results show that PC-SAFT predictions are in a good accordance with the experimental data, and PC-SAFT can be used to predict the whole phase diagram of an API/polymer solid dispersion as a function of the kind of API and polymer and of the polymer's molecular weight. This remarkably simplifies the screening process for suitable API/polymer combinations.

  6. Caracterização de uma junta soldada com suporte de solda a base de fibra de vidro Characterization of awelded joint with fiber glass based weld support

    Directory of Open Access Journals (Sweden)

    Luiz Cláudio Soares Tatagiba

    2012-03-01

    Full Text Available O objetivo deste trabalho foi avaliar um suporte de solda a base de tecido de fibra de vidro, tendo sido usada uma junta soldada pelo processo MIG/MAG de aço C-Mn com 16 mm de espessura e chanfro tipo V, característico da soldagem unilateral. Após a deposição do passe de raiz sobre o suporte de solda, a junta foi completada por soldagem MIG/MAG convencional, sendo avaliada por meio de ensaios não-destrutivos e destrutivos (tração transversal, dobramento lateral e dureza, além de microscopia óptica e espectrometria de energia dispersiva de raios-X (EDS nas inclusões do passe de raiz e do passe de acabamento. Os resultados mostram que a microestrutura do metal de solda é semelhante na raiz e no acabamento da junta soldada e típica de metal de solda de aços ferríticos. No passe de raiz, que esteve em contato com o suporte de fibra de vidro, não foi observado contaminação pela fibra de vidro tanto na superfície do cordão de solda como nas inclusões não metálicas. Os resultados dos ensaios mecânicos (tração, dobramento e dureza foram adequados e mostraram a adequabilidade do suporte de solda a base de fibra de vidro para aplicações na indústria de fabricação por soldagem.The objective of this work was to evaluate a weld support based on fiber glass tissue, having been used a joint welded by the MIG/MAG process of an C-Mn steel with 16 mm thick and a V groove, characteristic of the one-side welding. After the depostition of the root pass over the weld support, the joint was completed by conventional MIG/MAG welding, being evaluated by means of non-destructive and destructive tests (transversal tension, lateral bending and hardness. In addition, optical microscopy and spectroscopy of dispersed energy (SDE in inclusions of the root pass and the finishing pass. The results show that microsctructure of the weld metal is similar at the root and at the finishing weld bead and typical of ferritic steel weld metal. At he root

  7. Nosema ceranae in drone honey bees (Apis mellifera).

    Science.gov (United States)

    Traver, Brenna E; Fell, Richard D

    2011-07-01

    Nosema ceranae is a microsporidian intracellular parasite of honey bees, Apis mellifera. Previously Nosema apis was thought to be the only cause of nosemosis, but it has recently been proposed that N. ceranae is displacing N. apis. The rapid spread of N. ceranae could be due to additional transmission mechanisms, as well as higher infectivity. We analyzed drones for N. ceranae infections using duplex qPCR with species specific primers and probes. We found that both immature and mature drones are infected with N. ceranae at low levels. This is the first report detecting N. ceranae in immature bees. Our data suggest that because drones are known to drift from their parent hives to other hives, they could provide a means for disease spread within and between apiaries.

  8. Acinetobacter apis sp. nov., isolated from the intestinal tract of a honey bee, Apis mellifera.

    Science.gov (United States)

    Kim, Pil Soo; Shin, Na-Ri; Kim, Joon Yong; Yun, Ji-Hyun; Hyun, Dong-Wook; Bae, Jin-Woo

    2014-08-01

    A novel Gram-negative, obligate aerobic, non-motile, and both coccobacillus- and bacillus-shaped bacterium, designated strain HYN18(T), was isolated from the intestinal tract of a honey bee (Apis mellifera). The isolate was oxidase-negative and catalase-positive. Strain HYN18(T) showed optimum growth at 25°C, pH 6-7, and in the presence of 1% (w/v) NaCl in trypticase soy broth medium. The isolate was negative for hydrolyses of starch, casein, gelatin and urea, indole production from tryptone and hemolysis on sheep blood agar. A phylogenetic analysis based on the 16S rRNA gene and rpoB gene sequence showed that strain HYN18(T) was most closely related to Acinetobacter nectaris SAP 763.2(T) and A. boissieri SAP 284.1(T) with 98.3% and 98.1% similarity (16S rRNA gene), respectively, and 84.4% similarity with Acinetobacter nectaris SAP 763.2(T) (rpoB gene). The major cellular fatty acids were summed features 3 (comprising C16:1ω7c /C16:1ω6c ), C12:0 and C16:0. The main isoprenoid quinone was ubiquinone-9 (Q-9). The polar lipids of strain HYN18(T) were phosphatidylethanolamine, three unidentified lipids, an unidentified phospholipid and an unidentified glycolipid. The DNA G+C content was 40.6 mol%. DNA-DNA hybridization experiments indicated less than 33 ± 10% relatedness to the closest phylogenetic species, Acinetobacter nectaris SAP 763.2(T). Thus, the phenotypic, phylogenetic and genotypic analyses indicate that strain HYN18(T) is a novel species within the genus Acinetobacter, for which the name Acinetobacter apis is proposed. The type strain is HYN18(T) (=KACC 16906(T) =JCM 18575(T)).

  9. PrismTech Data Distribution Service Java API Evaluation

    Science.gov (United States)

    Riggs, Cortney

    2008-01-01

    My internship duties with Launch Control Systems required me to start performance testing of an Object Management Group's (OMG) Data Distribution Service (DDS) specification implementation by PrismTech Limited through the Java programming language application programming interface (API). DDS is a networking middleware for Real-Time Data Distribution. The performance testing involves latency, redundant publishers, extended duration, redundant failover, and read performance. Time constraints allowed only for a data throughput test. I have designed the testing applications to perform all performance tests when time is allowed. Performance evaluation data such as megabits per second and central processing unit (CPU) time consumption were not easily attainable through the Java programming language; they required new methods and classes created in the test applications. Evaluation of this product showed the rate that data can be sent across the network. Performance rates are better on Linux platforms than AIX and Sun platforms. Compared to previous C++ programming language API, the performance evaluation also shows the language differences for the implementation. The Java API of the DDS has a lower throughput performance than the C++ API.

  10. The MPO API: A tool for recording scientific workflows

    Energy Technology Data Exchange (ETDEWEB)

    Wright, John C., E-mail: jcwright@mit.edu [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Greenwald, Martin; Stillerman, Joshua [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Abla, Gheni; Chanthavong, Bobby; Flanagan, Sean; Schissel, David; Lee, Xia [General Atomics, San Diego, CA (United States); Romosan, Alex; Shoshani, Arie [Lawrence Berkeley Laboratory, Berkeley, CA (United States)

    2014-05-15

    Highlights: • A description of a new framework and tool for recording scientific workflows, especially those resulting from simulation and analysis. • An explanation of the underlying technologies used to implement this web based tool. • Several examples of using the tool. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for high-consequence applications. The Metadata, Provenance and Ontology (MPO) project builds on previous work [M. Greenwald, Fusion Eng. Des. 87 (2012) 2205–2208] and is focused on providing documentation of workflows, data provenance and the ability to data-mine large sets of results. While there are important design and development aspects to the data structures and user interfaces, we concern ourselves in this paper with the application programming interface (API) – the set of functions that interface with the data server. Our approach for the data server is to follow the Representational State Transfer (RESTful) software architecture style for client–server communication. At its core, the API uses the POST and GET methods of the HTTP protocol to transfer workflow information in message bodies to targets specified in the URL to and from the database via a web server. Higher level API calls are built upon this core API. This design facilitates implementation on different platforms and in different languages and is robust to changes in the underlying technologies used. The command line client implementation can communicate with the data server from any machine with HTTP access.

  11. Fertile diploid drones in africanized honeybees, Apis mellifera adansonii.

    Science.gov (United States)

    Chaud-Netto, J

    1977-02-15

    59 diploid drones of Apis mellifera adansonii, 12-37 days old, were tested for the presence of semen after provoked ejaculation; 13 drones ejaculated semen enough to be used in an instrumental insemination, but only three on them (5%) furnished 1 mm3 of semen. The problems referring to the attainment of descendants from the 2n drones are briefly discussed.

  12. Biophysics of the subgenual organ of the honeybee, Apis mellifera

    DEFF Research Database (Denmark)

    Kilpinen, Ole; Storm, Jesper

    1997-01-01

    The subgenual organ of the honeybee (Apis mellifera) is suspended in a haemolymph channel in the tibia of each leg. When the leg is accelerated, inertia causes the haemolymph (and the subgenual organ) to lag behind the movement of the rest of the leg. The magnitude of this phase lag determines...

  13. Standard methods for research on apis mellifera gut symbionts

    Science.gov (United States)

    Gut microbes can play an important role in digestion, disease resistance, and the general health of animals, but little is known about the biology of gut symbionts in Apis mellifera. This paper is part of a series on honey bee research methods, providing protocols for studying gut symbionts. We desc...

  14. The Proteins API: accessing key integrated protein and genome information.

    Science.gov (United States)

    Nightingale, Andrew; Antunes, Ricardo; Alpi, Emanuele; Bursteinas, Borisas; Gonzales, Leonardo; Liu, Wudong; Luo, Jie; Qi, Guoying; Turner, Edd; Martin, Maria

    2017-04-05

    The Proteins API provides searching and programmatic access to protein and associated genomics data such as curated protein sequence positional annotations from UniProtKB, as well as mapped variation and proteomics data from large scale data sources (LSS). Using the coordinates service, researchers are able to retrieve the genomic sequence coordinates for proteins in UniProtKB. This, the LSS genomics and proteomics data for UniProt proteins is programmatically only available through this service. A Swagger UI has been implemented to provide documentation, an interface for users, with little or no programming experience, to 'talk' to the services to quickly and easily formulate queries with the services and obtain dynamically generated source code for popular programming languages, such as Java, Perl, Python and Ruby. Search results are returned as standard JSON, XML or GFF data objects. The Proteins API is a scalable, reliable, fast, easy to use RESTful services that provides a broad protein information resource for users to ask questions based upon their field of expertise and allowing them to gain an integrated overview of protein annotations available to aid their knowledge gain on proteins in biological processes. The Proteins API is available at (http://www.ebi.ac.uk/proteins/api/doc).

  15. Sperm use economy of honeybee (Apis mellifera) queens

    DEFF Research Database (Denmark)

    Baer, Boris; Collins, Jason; Maalaps, Kristiina;

    2016-01-01

    the fecundity and longevity of queens and therefore colony fitness. We quantified the number of sperm that honeybee (Apis mellifera) queens use to fertilize eggs. We examined sperm use in naturally mated queens of different ages and in queens artificially inseminated with different volumes of semen. We found...

  16. The Automatic Start Method of Application Program Using API

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    This paper introduces on a method about the au-tomactic start of application program. Through defining Registryby API function, the automatic start of specified application pro-gram is fulfilled when Windows98 is taking action. It gives facil-ities to many computer application works.

  17. Modelling the subgenual organ of the honeybee, Apis mellifera

    DEFF Research Database (Denmark)

    Storm, Jesper; Kilpinen, Ole

    1998-01-01

    In a recent study on the honeybee (Apis mellifera), the subgenual organ was observed moving inside the leg during sinusoidal vibrations of the leg (Kilpinen and Storm 1997). The subgenual organ of the honeybee is suspended in a haemolymph channel in the tibia of each leg. When the leg accelerates...

  18. Standard methods for Apis mellifera anatomy and dissection

    Science.gov (United States)

    An understanding of the anatomy and functions of internal and external structures are fundamental to many studies on the honey bee Apis mellifera. Similarly, proficiency in dissection techniques is vital for many more complex procedures. In this paper, which is a prelude to the other papers of the C...

  19. New results on sporadic ionization observed with the API technique

    Science.gov (United States)

    Bakhmetieva, N. V.; Belikovich, V. V.; Kagan, L. M.

    We present new results of our studies of sporadic E-layers E s by means of the artificial periodic irregularities API technique Artificial periodic irregularities were generated in antinodes of the standing electromagnetic wave formed due to interference of HF radio waves transmitted vertically and reflected from the ionosphere The API are horizontally aligned with a vertical scale of one-half of the wavelength lambda of the transmitted wave for more details on the API method and its applications see Belikovich et al Ionospheric Research by Means of Artificial Periodic Irregularities - Katlenburg-Lindau Germany 2002 Copernicus GmbH ISBN 3-936586-03-9 160 pp Recently we have presented and experimentally realized a method to determine the sporadic E-layer ion composition the molecular masses of the predominant metallic ions and the total ion densities on the basis of the measurements of the amplitude and the decay time of the API signals To study the structure of sporadic ionization layers in the E region as well as a possibility and effectiveness of Es modification by high-power radiowave transmissions we designed and carried out another experiment at the SURA facility 56 1 r N 44 1 r E in August 10-15 2004 The ionosphere modification was done by O-mode waves using two SURA transmitters at the frequency 4 3 MHz with effective radiated power ERP of about 60 MW at the transmitting schedule of the 1-min on 2-min off so-called additional heating The third transmitter was used for API formation and

  20. The using of API steel in pipelines in Brazil; A utilizacao do aco API em dutos no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Narcisi Junior, Aldo; Torii, Paulo; Nogueira, Shirleine [BRASTUBO, Sao Paulo, SP (Brazil); Machado Filho, Fausto de Assis; Silva, Carlos Norberto Paula da; Camey, Kenji [Companhia Siderurgica Paulista (COSIPA), Cubatao, SP (Brazil)

    1998-07-01

    This work presents an overview of application, production technology improvements, and increased demand for API lines in Brazil. The need of more economical installation of oil and gas pipelines has forced the utilization of higher strength line pipe grades. This scenario induced the development of a highly competitive steelmaking and pipe producing industry in Brazil. (author)

  1. EXPERIENCE API – NEW STANDARD OF E-LEARNING SOFTWARE AND EXAMPLES OF ITS PRACTICAL USE

    Directory of Open Access Journals (Sweden)

    Oleksandr A. Shcherbyna

    2016-07-01

    Full Text Available The purpose of the article is to analyze features of the new standard of e-learning software - Experience API (xAPI, previously also known as the Tin Can API. The standard defines a way of interaction between xAPI-clients – software which students work with while e-learning process, and xAPI-servers – Learning Record Stores (LRS, which store data about their results. Standard also defines LRS data representation format and a way of data transfers between LRS, which makes it possible to combine several LRS into distributed database that could accumulate information about people training in formal, non-formal and informal education throughout life. The article contains review of available xAPI-clients, xAPI-servers, and the results of their testing, which prove the possibility of their usage in our educational institutions.

  2. Changes in Alternative Splicing in Apis Mellifera Bees Fed Apis Cerana Royal Jelly

    Directory of Open Access Journals (Sweden)

    Shi Yuan Yuan

    2014-12-01

    Full Text Available The Western honey bee (Apis mellifera is a social insect characterized by caste differentiation in which the queen bee and worker bees display marked differences in morphology, behavior, reproduction, and longevity despite their identical genomes. The main causative factor in caste differentiation is the food fed to queen larvae, termed royal jelly (RJ. Alternative splicing (AS is an important RNA-mediated post-transcriptional process in eukaryotes. Here we report AS changes in A. mellifera after being fed either A. mellifera RJ or A. cerana RJ. The results demonstrated that the RJ type affected 4 types of AS in adult A. mellifera: exon skipping, intron retention, alternative 5’ splice sites, and alternative 3’splice sites. After feeding with A. cerana RJ, AS occurred in many genes in adult A. mellifera that encode proteins involved in development, growth, the tricarboxylic acid cycle, and substance metabolism. This study provides the first evidence that heterospecific RJ can influence the AS of many genes related to honey bee development and growth.

  3. Host Specificity in the Honeybee Parasitic Mite, Varroa spp. in Apis mellifera and Apis cerana.

    Directory of Open Access Journals (Sweden)

    Alexis L Beaurepaire

    Full Text Available The ectoparasitic mite Varroa destructor is a major global threat to the Western honeybee Apis mellifera. This mite was originally a parasite of A. cerana in Asia but managed to spill over into colonies of A. mellifera which had been introduced to this continent for honey production. To date, only two almost clonal types of V. destructor from Korea and Japan have been detected in A. mellifera colonies. However, since both A. mellifera and A. cerana colonies are kept in close proximity throughout Asia, not only new spill overs but also spill backs of highly virulent types may be possible, with unpredictable consequences for both honeybee species. We studied the dispersal and hybridisation potential of Varroa from sympatric colonies of the two hosts in Northern Vietnam and the Philippines using mitochondrial and microsatellite DNA markers. We found a very distinct mtDNA haplotype equally invading both A. mellifera and A. cerana in the Philippines. In contrast, we observed a complete reproductive isolation of various Vietnamese Varroa populations in A. mellifera and A. cerana colonies even if kept in the same apiaries. In light of this variance in host specificity, the adaptation of the mite to its hosts seems to have generated much more genetic diversity than previously recognised and the Varroa species complex may include substantial cryptic speciation.

  4. Host Specificity in the Honeybee Parasitic Mite, Varroa spp. in Apis mellifera and Apis cerana.

    Science.gov (United States)

    Beaurepaire, Alexis L; Truong, Tuan A; Fajardo, Alejandro C; Dinh, Tam Q; Cervancia, Cleofas; Moritz, Robin F A

    2015-01-01

    The ectoparasitic mite Varroa destructor is a major global threat to the Western honeybee Apis mellifera. This mite was originally a parasite of A. cerana in Asia but managed to spill over into colonies of A. mellifera which had been introduced to this continent for honey production. To date, only two almost clonal types of V. destructor from Korea and Japan have been detected in A. mellifera colonies. However, since both A. mellifera and A. cerana colonies are kept in close proximity throughout Asia, not only new spill overs but also spill backs of highly virulent types may be possible, with unpredictable consequences for both honeybee species. We studied the dispersal and hybridisation potential of Varroa from sympatric colonies of the two hosts in Northern Vietnam and the Philippines using mitochondrial and microsatellite DNA markers. We found a very distinct mtDNA haplotype equally invading both A. mellifera and A. cerana in the Philippines. In contrast, we observed a complete reproductive isolation of various Vietnamese Varroa populations in A. mellifera and A. cerana colonies even if kept in the same apiaries. In light of this variance in host specificity, the adaptation of the mite to its hosts seems to have generated much more genetic diversity than previously recognised and the Varroa species complex may include substantial cryptic speciation.

  5. Infra-population and -community dynamics of the parasites Nosema apis and Nosema ceranae, and consequences for honey bee (Apis mellifera hosts.

    Directory of Open Access Journals (Sweden)

    Geoffrey R Williams

    Full Text Available Nosema spp. fungal gut parasites are among myriad possible explanations for contemporary increased mortality of western honey bees (Apis mellifera, hereafter honey bee in many regions of the world. Invasive Nosema ceranae is particularly worrisome because some evidence suggests it has greater virulence than its congener N. apis. N. ceranae appears to have recently switched hosts from Asian honey bees (Apis cerana and now has a nearly global distribution in honey bees, apparently displacing N. apis. We examined parasite reproduction and effects of N. apis, N. ceranae, and mixed Nosema infections on honey bee hosts in laboratory experiments. Both infection intensity and honey bee mortality were significantly greater for N. ceranae than for N. apis or mixed infections; mixed infection resulted in mortality similar to N. apis parasitism and reduced spore intensity, possibly due to inter-specific competition. This is the first long-term laboratory study to demonstrate lethal consequences of N. apis and N. ceranae and mixed Nosema parasitism in honey bees, and suggests that differences in reproduction and intra-host competition may explain apparent heterogeneous exclusion of the historic parasite by the invasive species.

  6. The Auroral Planetary Imaging and Spectroscopy (APIS) service

    CERN Document Server

    Lamy, Laurent; Henry, Florence; Sidaner, Pierre Le

    2015-01-01

    The Auroral Planetary Imaging and Spectroscopy (APIS) service, accessible online, provides an open and interactive access to processed auroral observations of the outer planets and their satellites. Such observations are of interest for a wide community at the interface between planetology and magnetospheric and heliospheric physics. APIS consists of (i) a high level database, built from planetary auroral observations acquired by the Hubble Space Telescope (HST) since 1997 with its mostly used Far-UltraViolet spectro-imagers, (ii) a dedicated search interface aimed at browsing efficiently this database through relevant conditional search criteria and (iii) the ability to interactively work with the data online through plotting tools developed by the Virtual Observatory (VO) community, such as Aladin and Specview. This service is VO compliant and can therefore also been queried by external search tools of the VO community. The diversity of available data and the capability to sort them out by relevant physical...

  7. “Wrapping” X3DOM around Web Audio API

    Directory of Open Access Journals (Sweden)

    Andreas Stamoulias

    2015-12-01

    Full Text Available Spatial sound has a conceptual role in the Web3D environments, due to highly realism scenes that can provide. Lately the efforts are concentrated on the extension of the X3D/ X3DOM through spatial sound attributes. This paper presents a novel method for the introduction of spatial sound components in the X3DOM framework, based on X3D specification and Web Audio API. The proposed method incorporates the introduction of enhanced sound nodes for X3DOM which are derived by the implementation of the X3D standard components, enriched with accessional features of Web Audio API. Moreover, several examples-scenarios developed for the evaluation of our approach. The implemented examples established the achievability of new registered nodes in X3DOM, for spatial sound characteristics in Web3D virtual worlds.

  8. Draft genome sequence of the Algerian bee Apis mellifera intermissa

    Directory of Open Access Journals (Sweden)

    Nizar Jamal Haddad

    2015-06-01

    Full Text Available Apis mellifera intermissa is the native honeybee subspecies of Algeria. A. m. intermissa occurs in Tunisia, Algeria and Morocco, between the Atlas and the Mediterranean and Atlantic coasts. This bee is very important due to its high ability to adapt to great variations in climatic conditions and due to its preferable cleaning behavior. Here we report the draft genome sequence of this honey bee, its Whole Genome Shotgun project has been deposited at DDBJ/EMBL/GenBank under the accession JSUV00000000. The 240-Mb genome is being annotated and analyzed. Comparison with the genome of other Apis mellifera sub-species promises to yield insights into the evolution of adaptations to high temperature and resistance to Varroa parasite infestation.

  9. Draft genome sequence of the Algerian bee Apis mellifera intermissa.

    Science.gov (United States)

    Haddad, Nizar Jamal; Loucif-Ayad, Wahida; Adjlane, Noureddine; Saini, Deepti; Manchiganti, Rushiraj; Krishnamurthy, Venkatesh; AlShagoor, Banan; Batainh, Ahmed Mahmud; Mugasimangalam, Raja

    2015-06-01

    Apis mellifera intermissa is the native honeybee subspecies of Algeria. A. m. intermissa occurs in Tunisia, Algeria and Morocco, between the Atlas and the Mediterranean and Atlantic coasts. This bee is very important due to its high ability to adapt to great variations in climatic conditions and due to its preferable cleaning behavior. Here we report the draft genome sequence of this honey bee, its Whole Genome Shotgun project has been deposited at DDBJ/EMBL/GenBank under the accession JSUV00000000. The 240-Mb genome is being annotated and analyzed. Comparison with the genome of other Apis mellifera sub-species promises to yield insights into the evolution of adaptations to high temperature and resistance to Varroa parasite infestation.

  10. Apis florea en Jordanie : origine de la population fondatrice

    OpenAIRE

    HADDAD, Nizar; FUCHS, Stefan; Randall Hepburn, H.; Radloff, Sarah E.

    2009-01-01

    International audience; A recent isolated population of Apis florea has been reported from Aqaba in Jordan at the Red Sea, consisting of numerous colonies within a still limited range which apparently is expanding. This region is about 1500 km apart from its next occurrences in Sudan where it had been introduced and first detected in 1985 and about 2000 km apart from its next natural occurrences in Iran and Oman. These bees apparently have been imported by human transport, most likely by ship...

  11. Metadata and API Based Environment Aware Content Delivery Architecture

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    One of the limitations of current content delivery networks is lack of support for environment aware content delivery. This paper first discusses the requirements of such support, and proposes a new metadata gateway based environment aware content delivery architecture. The paper discusses in some details key functions and technologies of environment aware content delivery architecture, including its APIs and control policies. Finally the paper presents an application to illustrate advantages of environment aware content delivery architecture in the context of next generation network.

  12. Toxicity of Dimorphandra mollis to Workers of Apis mellifera

    Directory of Open Access Journals (Sweden)

    Cintra Priscila

    2002-01-01

    Full Text Available In this communication we have evaluated the toxic properties of methanol extracts from flowers, peduncles, leaves, petioles and stem bark of Dimorphandra mollis to Apis mellifera workers. Astilbin (5,7,3',4'-tetrahydroxy--2,3-dihydroflavonol-3-beta-O-rhamnoside has been isolated from peduncles and flowers of this plant in large amounts. Astilbin presented insecticidal activity against confined bees. The results suggest that astilbin reduces the average survival of treated bees.

  13. Carbonic anhydrase from Apis mellifera: purification and inhibition by pesticides.

    Science.gov (United States)

    Soydan, Ercan; Güler, Ahmet; Bıyık, Selim; Şentürk, Murat; Supuran, Claudiu T; Ekinci, Deniz

    2017-12-01

    Carbonic anhydrase (CA) enzymes have been shown to play an important role in ion transport and in pH regulation in several organisms. Despite this information and the wealth of knowledge regarding the significance of CA enzymes, few studies have been reported about bee CA enzymes and the hazardous effects of chemicals. Using Apis mellifera as a model, this study aimed to determine the risk of pesticides on Apis mellifera Carbonic anhydrase enzyme (Am CA). CA was initially purified from Apis mellifera spermatheca for the first time in the literature. The enzyme was purified with an overall purification of ∼35-fold with a molecular weight of ∼32 kDa. The enzyme was then exposed to pesticides, including tebuconazole, propoxur, carbaryl, carbofuran, simazine and atrazine. The six pesticides dose-dependently inhibited in vitro AmCA activity at low micromolar concentrations. IC50 values for the pesticides were 0.0030, 0.0321, 0.0031, 0.0087, 0.0273 and 0.0165 μM, respectively. The AmCA inhibition mechanism of these compounds is unknown at this moment.

  14. ADS 2.0: New Architecture, API and Services

    Science.gov (United States)

    Chyla, R.; Accomazzi, A.; Holachek, A.; Grant, C. S.; Elliott, J.; Henneken, E. A.; Thompson, D. M.; Kurtz, M. J.; Murray, S. S.; Sudilovsky, V.

    2015-09-01

    The ADS platform is undergoing the biggest rewrite of its 20-year history. While several components have been added to its architecture over the past couple of years, this talk will concentrate on the underpinnings of ADS's search layer and its API. To illustrate the design of the components in the new system, we will show how the new ADS user interface is built exclusively on top of the API using RESTful web services. Taking one step further, we will discuss how we plan to expose the treasure trove of information hosted by ADS (10 million records and fulltext for much of the Astronomy and Physics refereed literature) to partners interested in using this API. This will provide you (and your intelligent applications) with access to ADS's underlying data to enable the extraction of new knowledge and the ingestion of these results back into the ADS. Using this framework, researchers could run controlled experiments with content extraction, machine learning, natural language processing, etc. In this talk, we will discuss what is already implemented, what will be available soon, and where we are going next.

  15. Variation morphogeometrics of Africanized honey bees (Apis mellifera in Brazil

    Directory of Open Access Journals (Sweden)

    Lorena A. Nunes

    2012-09-01

    Full Text Available The morphometrics of the honey bee Apis mellifera L., 1758 has been widely studied mainly because this species has great ecological importance, high adaptation capacity, wide distribution and capacity to effectively adapt to different regions. The current study aimed to investigate the morphometric variations of wings and pollen baskets of honey bees Apis mellifera scutellata Lepeletier, 1836 from the five regions in Brazil. We used geometric morphometrics to identify the existence of patterns of variations of shape and size in Africanized honey bees in Brazil 16 years after the classic study with this species, allowing a temporal and spatial comparative analysis using new technological resources to assess morphometrical data. Samples were collected in 14 locations in Brazil, covering the five geographical regions of the country. The shape analysis and multivariate analyses of the wing allowed to observe that there is a geographical pattern among the population of Apis mellifera in Brazil. The geographical variations may be attributed to the large territorial extension of the country in addition to the differences between the bioregions.

  16. Improving the API dissolution rate during pharmaceutical hot-melt extrusion I: Effect of the API particle size, and the co-rotating, twin-screw extruder screw configuration on the API dissolution rate.

    Science.gov (United States)

    Li, Meng; Gogos, Costas G; Ioannidis, Nicolas

    2015-01-15

    The dissolution rate of the active pharmaceutical ingredients in pharmaceutical hot-melt extrusion is the most critical elementary step during the extrusion of amorphous solid solutions - total dissolution has to be achieved within the short residence time in the extruder. Dissolution and dissolution rates are affected by process, material and equipment variables. In this work, we examine the effect of one of the material variables and one of the equipment variables, namely, the API particle size and extruder screw configuration on the API dissolution rate, in a co-rotating, twin-screw extruder. By rapidly removing the extruder screws from the barrel after achieving a steady state, we collected samples along the length of the extruder screws that were characterized by polarized optical microscopy (POM) and differential scanning calorimetry (DSC) to determine the amount of undissolved API. Analyses of samples indicate that reduction of particle size of the API and appropriate selection of screw design can markedly improve the dissolution rate of the API during extrusion. In addition, angle of repose measurements and light microscopy images show that the reduction of particle size of the API can improve the flowability of the physical mixture feed and the adhesiveness between its components, respectively, through dry coating of the polymer particles by the API particles.

  17. The end of polling: why and how to transform a REST API into a Data Streaming API?

    CERN Document Server

    CERN. Geneva

    2017-01-01

    We know interactivity is the key to keep our user’s interest alive but we can’t reduce animation to UI anymore. Twitter, Waze, Slack… users are used to have real-time data in applications they love. But how can you turn your static API into a stream of data? By pulling? Pushing? Webhook-ing? When talking about data streaming, we often think about WebSockets. But have you ever heard of Server-Sent Events? In this tools-in-action we will compare those technologies to understand which one you should opt for depending on your usecase, and I’ll show you how we have been reducing the amount of data to transfer even further with JSON-Patch. And because real-time data is not only needed by web (and because it’s much more fun), I’ll show you how we can make a drone dance on streamed APIs.

  18. A SNP based high-density linkage map of Apis cerana reveals a high recombination rate similar to Apis mellifera.

    Directory of Open Access Journals (Sweden)

    Yuan Yuan Shi

    Full Text Available BACKGROUND: The Eastern honey bee, Apis cerana Fabricius, is distributed in southern and eastern Asia, from India and China to Korea and Japan and southeast to the Moluccas. This species is also widely kept for honey production besides Apis mellifera. Apis cerana is also a model organism for studying social behavior, caste determination, mating biology, sexual selection, and host-parasite interactions. Few resources are available for molecular research in this species, and a linkage map was never constructed. A linkage map is a prerequisite for quantitative trait loci mapping and for analyzing genome structure. We used the Chinese honey bee, Apis cerana cerana to construct the first linkage map in the Eastern honey bee. RESULTS: F2 workers (N = 103 were genotyped for 126,990 single nucleotide polymorphisms (SNPs. After filtering low quality and those not passing the Mendel test, we obtained 3,000 SNPs, 1,535 of these were informative and used to construct a linkage map. The preliminary map contains 19 linkage groups, we then mapped the 19 linkage groups to 16 chromosomes by comparing the markers to the genome of A. mellfiera. The final map contains 16 linkage groups with a total of 1,535 markers. The total genetic distance is 3,942.7 centimorgans (cM with the largest linkage group (180 loci measuring 574.5 cM. Average marker interval for all markers across the 16 linkage groups is 2.6 cM. CONCLUSION: We constructed a high density linkage map for A. c. cerana with 1,535 markers. Because the map is based on SNP markers, it will enable easier and faster genotyping assays than randomly amplified polymorphic DNA or microsatellite based maps used in A. mellifera.

  19. Aggressiveness index of Apis Mellifera (Hymenoptera: Aapidae) Índice de agresividad en Apis mellifera ( Hymenoptera: Aapidae )

    OpenAIRE

    Sierra Omar Danilo; Insuasty Torres Jennyfer

    2004-01-01

    An index measuring the aggressiveness among ten colonies of Apis mellifera was elaborated based on the third generation synthetic indices by Charum et al. (1999). The index values are subject to a fixed parameter used as the beginning or standard value, and correspond to the aggressive features of some Africans colonies studied by Rothenbuler et al. (1968). In the ten colonies the index values are notably smaller than those of African colonies and are biased to the lowest values. This indicat...

  20. First Identification of Nosema Ceranae (Microsporidia Infecting Apis Mellifera in Venezuela

    Directory of Open Access Journals (Sweden)

    Porrini Leonardo P.

    2017-06-01

    Full Text Available Nosema ceranae is a pathogen of Apis mellifera, which seems to have jumped from its original host Asiatic honey bee Apis ceranae. Nosemosis which affects the honey bee Apis mellifera is caused by two parasitic fungi described as etiologic agents of the disease. Nosema apis was the only microsporidian infection identified in A. mellifera until N. ceranae in Taiwan and Europe. Nosema spp. positive samples of adult worker bees from the Venezuelean state of Lara were determined through light microscopy of spores. Samples were then tested to determine Nosema species (N.apis/N.ceranae using previously reported PCR primers for the 16S rRNA gene. A multiplex PCR assay was used to differentiate both N. apis and N. ceranae species. Only N. ceranae was found in the analyzed samples and the percentage of infected foragers fluctuated between 18% and 60%.

  1. Use of the API 20E system to identify veterinary Enterobacteriaceae.

    OpenAIRE

    Swanson, E C; Collins, M T

    1980-01-01

    A total of 503 veterinary enteric bacterial pathogens obtained from state veterinary diagnostic laboratories were tested on API 20E strips to determine whether this rapid microidentification system could be utilized for veterinary clinical microbiology. The API 20E strip accurately identified 96% of the veterinary isolates and misidentified 3%. Identifications by the API system and the diagnostic laboratories were in agreement in 85% of the isolates, disagreement on 16% of the isolates, and 1...

  2. Is the Sample Good Enough? Comparing Data from Twitter's Streaming API with Twitter's Firehose

    OpenAIRE

    Morstatter, Fred; Pfeffer, Jürgen; Liu, Huan; Carley, Kathleen M.

    2013-01-01

    Twitter is a social media giant famous for the exchange of short, 140-character messages called "tweets". In the scientific community, the microblogging site is known for openness in sharing its data. It provides a glance into its millions of users and billions of tweets through a "Streaming API" which provides a sample of all tweets matching some parameters preset by the API user. The API service has been used by many researchers, companies, and governmental institutions that want to extract...

  3. Caracterização microestrutural e propriedades mecânicas da liga de alumínio 2198-T851 em configuração tailored blank soldada por FSW - Friction Stir Welding

    Directory of Open Access Journals (Sweden)

    Ivan Moroz

    2012-03-01

    Full Text Available Nos setores industriais relacionados à aeronáutica e automobilística, tem-se buscado o desenvolvimento e a aplicação de ligas metálicas leves com o intuito da redução de massa dos produtos e consequente redução do consumo de combustível. Por suas dimensões e requisitos estruturais, componentes e seções de aviões e automóveis são produzidos através da união por processos de soldagem por fusão. Entretanto, processos de soldagem no estado sólido são preferíveis por evitar defeitos decorrentes da fusão, e têm sido objeto de estudo nas últimas duas décadas. Este trabalho teve por objetivo a caracterização de uma solda por FSW - Friction Stir Welding em junta de topo, da Liga de Alumínio 2198-T851 com espessuras diferentes (configuração "Tailored Blanks". A metodologia utilizada na caracterização envolveu a determinação das propriedades mecânicas das juntas soldadas, compreendendo ensaios de tração e determinação de perfil de microdureza na seção transversal; e buscou-se compreender a relação entre as alterações microestruturais promovidas pelo processo de soldagem e as propriedades resultantes. Concluiu-se que, devido aos fenômenos metalúrgicos decorrentes do processo de soldagem utilizado, alterações microestruturais tais como refino de grão, encruamento e dissolução/formação de fases precipitadas permitiram a obtenção de uma solda cujas propriedades mecânicas de tração (salvo alongamento igualaram-se a ou excederam aquelas do metal base, evidenciando a viabilidade de utilização dos parâmetros de soldagem por FSW utilizados neste trabalho.In both aeronautic and automobile related industries, development and application of light-weighted metallic alloys have been pursued with the intention of reducing product weight and consequent fuel consumption. Due to their dimension and structural requirements, components and sections from airplanes and automobiles are produced through fusion

  4. Toxicity of Dimorphandra mollis to Workers of Apis mellifera

    OpenAIRE

    Cintra Priscila; Malaspina Osmar; Petacci Fernando; Fernandes João B.; Bueno Odair C.; Vieira Paulo C.; Silva M. Fátima das G. F. da

    2002-01-01

    Nesta comunicação estamos reportando as propriedades tóxicas dos extratos metanólicos das flores, pedúnculos, folhas, pecíolo e casca do tronco de Dimorphandra mollis sobre as operárias de Apis mellifera. Astilbina (3-beta-O-rhamnosideo de 5,7,3',4'-- tetraidroxi-2,3-diidroflavonol) isolada dos pedúnculos e flores como o seu principal componente, apresentou atividade inseticida sobre abelhas confinadas. Os resultados obtidos indicam que a astilbina reduz a sobrevivência média das abelhas trat...

  5. The Ensembl REST API: Ensembl Data for Any Language.

    Science.gov (United States)

    Yates, Andrew; Beal, Kathryn; Keenan, Stephen; McLaren, William; Pignatelli, Miguel; Ritchie, Graham R S; Ruffier, Magali; Taylor, Kieron; Vullo, Alessandro; Flicek, Paul

    2015-01-01

    We present a Web service to access Ensembl data using Representational State Transfer (REST). The Ensembl REST server enables the easy retrieval of a wide range of Ensembl data by most programming languages, using standard formats such as JSON and FASTA while minimizing client work. We also introduce bindings to the popular Ensembl Variant Effect Predictor tool permitting large-scale programmatic variant analysis independent of any specific programming language. The Ensembl REST API can be accessed at http://rest.ensembl.org and source code is freely available under an Apache 2.0 license from http://github.com/Ensembl/ensembl-rest. © The Author 2014. Published by Oxford University Press.

  6. Solar Eclipse Computer API: Planning Ahead for August 2017

    Science.gov (United States)

    Bartlett, Jennifer L.; Chizek Frouard, Malynda; Lesniak, Michael V.; Bell, Steve

    2016-01-01

    With the total solar eclipse of 2017 August 21 over the continental United States approaching, the U.S. Naval Observatory (USNO) on-line Solar Eclipse Computer can now be accessed via an application programming interface (API). This flexible interface returns local circumstances for any solar eclipse in JavaScript Object Notation (JSON) that can be incorporated into third-party Web sites or applications. For a given year, it can also return a list of solar eclipses that can be used to build a more specific request for local circumstances. Over the course of a particular eclipse as viewed from a specific site, several events may be visible: the beginning and ending of the eclipse (first and fourth contacts), the beginning and ending of totality (second and third contacts), the moment of maximum eclipse, sunrise, or sunset. For each of these events, the USNO Solar Eclipse Computer reports the time, Sun's altitude and azimuth, and the event's position and vertex angles. The computer also reports the duration of the total phase, the duration of the eclipse, the magnitude of the eclipse, and the percent of the Sun obscured for a particular eclipse site. On-line documentation for using the API-enabled Solar Eclipse Computer, including sample calls, is available (http://aa.usno.navy.mil/data/docs/api.php). The same Web page also describes how to reach the Complete Sun and Moon Data for One Day, Phases of the Moon, Day and Night Across the Earth, and Apparent Disk of a Solar System Object services using API calls.For those who prefer using a traditional data input form, local circumstances can still be requested that way at http://aa.usno.navy.mil/data/docs/SolarEclipses.php. In addition, the 2017 August 21 Solar Eclipse Resource page (http://aa.usno.navy.mil/data/docs/Eclipse2017.php) consolidates all of the USNO resources for this event, including a Google Map view of the eclipse track designed by Her Majesty's Nautical Almanac Office (HMNAO). Looking further ahead, a

  7. Improvements and extensions to API 618 related to pulsation and mechanical response studies

    NARCIS (Netherlands)

    Eijk, A.; Smeulers, J.P.M.; Blodgett, L.E.; Smalley, A.J.

    1999-01-01

    Purchasers of reciprocating compressors need a standard to help ensure reliable installations. The PNEUROP standard evolved in Europe, and the API 618 Standard in the U.S.A. Frequent application and generally good experience, worldwide, have led to four releases of API 618, the last dated June 1995.

  8. Predominant Api m 10 sensitization as risk factor for treatment failure in honey bee venom immunotherapy

    DEFF Research Database (Denmark)

    Frick, Marcel; Fischer, Jörg; Helbing, Arthur

    2016-01-01

    BACKGROUND: Component resolution recently identified distinct sensitization profiles in honey bee venom (HBV) allergy, some of which were dominated by specific IgE to Api m 3 and/or Api m 10, which have been reported to be underrepresented in therapeutic HBV preparations. OBJECTIVE: We performed...

  9. Macelignan inhibits bee pathogenic fungi Ascophaera apis growth through HOG1 pathway

    Directory of Open Access Journals (Sweden)

    Y.K. Shin

    2016-01-01

    Full Text Available Ascosphaera apis is a bee pathogen that causes bee larvae infection disease, to which treatment is not yet well investigated. The aim of this study was to investigate antifungal susceptibility in vitro against A. apis and to identify a new antifungal agent for this pathogen through minimal inhibitory concentration (MIC assay and western blot analysis. Macelignan had 1.56 and 3.125 μg/mL MIC against A. apis after 24 and 48 h, respectively, exhibiting the strongest growth inhibition against A. apis among the tested compounds (corosolic acid, dehydrocostus lactone, loganic acid, tracheloside, fangchinoline and emodin-8-O-β-D-glucopyranoside. Furthermore, macelignan showed a narrow-ranged spectrum against various fungal strains without any mammalian cell cytotoxicity. In spite of miconazole having powerful broad-ranged anti-fungal activity including A. apis, it demonstrated strong cytotoxicity. Therefore, even if macelignan alone was effective as an antifungal agent to treat A. apis, combined treatment with miconazole was more useful to overcome toxicity, drug resistance occurrence and cost effectiveness. Finally, HOG1 was revealed as a target molecule of macelignan in the anti-A. apis activity by inhibiting phosphorylation using S. cerevisiae as a model system. Based on our results, macelignan, a food-grade antimicrobial compound, would be an effective antifungal agent against A. apis infection in bees.

  10. Influence of humidity on the phase behavior of API/polymer formulations.

    Science.gov (United States)

    Prudic, Anke; Ji, Yuanhui; Luebbert, Christian; Sadowski, Gabriele

    2015-08-01

    Amorphous formulations of APIs in polymers tend to absorb water from the atmosphere. This absorption of water can induce API recrystallization, leading to reduced long-term stability during storage. In this work, the phase behavior of different formulations was investigated as a function of relative humidity. Indomethacin and naproxen were chosen as model APIs and poly(vinyl pyrrolidone) (PVP) and poly(vinyl pyrrolidone-co-vinyl acetate) (PVPVA64) as excipients. The formulations were prepared by spray drying. The water sorption in pure polymers and in formulations was measured at 25°C and at different values of relative humidity (RH=25%, 50% and 75%). Most water was absorbed in PVP-containing systems, and water sorption was decreasing with increasing API content. These trends could also be predicted in good agreement with the experimental data using the thermodynamic model PC-SAFT. Furthermore, the effect of absorbed water on API solubility in the polymer and on the glass-transition temperature of the formulations was predicted with PC-SAFT and the Gordon-Taylor equation, respectively. The absorbed water was found to significantly decrease the API solubility in the polymer as well as the glass-transition temperature of the formulation. Based on a quantitative modeling of the API/polymer phase diagrams as a function of relative humidity, appropriate API/polymer compositions can now be selected to ensure long-term stable amorphous formulations at given storage conditions.

  11. APIS - a novel approach for conditioning honey bees

    Directory of Open Access Journals (Sweden)

    Nicholas Hagen Kirkerud

    2013-04-01

    Full Text Available Honey bees perform robustly in different conditioning paradigms. This makes them excellent candidates for studying mechanisms of learning and memory at both an individual and a population level. Here we introduce a novel method of honey bee conditioning: APIS, the Automatic Performance Index System. In an enclosed walking arena where the interior is covered with an electric grid, presentation of odours from either end can be combined with weak electric shocks to form aversive associations. To quantify behavioural responses, we continuously monitor the movement of the bee by an automatic tracking system. We found that escapes from one side to the other, changes in velocity as well as distance and time spent away from the punished odour are suitable parameters to describe the bee’s learning capabilities.Our data show that in a short-term memory test the response rate for the conditioned stimulus in APIS correlates well with response rate obtained from conventional Proboscis Extension Response (PER-conditioning. Additionally, we discovered that bees modulate their behaviour to aversively learned odours by reducing their rate, speed and magnitude of escapes and that both generalisation and extinction seem to be different between appetitive and aversive stimuli. The advantages of this automatic system make it ideal for assessing learning rates in a standardised and convenient way, and its flexibility adds to our toolbox for studying honey bee behaviour.

  12. From where did the Western honeybee (Apis mellifera) originate?

    Science.gov (United States)

    Han, Fan; Wallberg, Andreas; Webster, Matthew T

    2012-08-01

    The native range of the honeybee Apis mellifera encompasses Europe, Africa, and the Middle East, whereas the nine other species of Apis are found exclusively in Asia. It is therefore commonly assumed that A. mellifera arose in Asia and expanded into Europe and Africa. However, other hypotheses for the origin of A. mellifera have also been proposed based on phylogenetic trees constructed from genetic markers. In particular, an analysis based on >1000 single-nucleotide polymorphism markers placed the root of the tree of A. mellifera subspecies among samples from Africa, suggestive of an out-of-Africa expansion. Here, we re-evaluate the evidence for this and other hypotheses by testing the robustness of the tree topology to different tree-building methods and by removing specimens with a potentially hybrid background. These analyses do not unequivocally place the root of the tree of A. mellifera subspecies within Africa, and are potentially consistent with a variety of hypotheses for honeybee evolution, including an expansion out of Asia. Our analyses also support high divergence between western and eastern European populations of A. mellifera, suggesting they are likely derived from two distinct colonization routes, although the sources of these expansions are still unclear.

  13. Genetic variation in natural honeybee populations, Apis mellifera capensis

    Science.gov (United States)

    Hepburn, Randall; Neumann, Peter; Radloff, Sarah E.

    2004-09-01

    Genetic variation in honeybee, Apis mellifera, populations can be considerably influenced by breeding and commercial introductions, especially in areas with abundant beekeeping. However, in southern Africa apiculture is based on the capture of wild swarms, and queen rearing is virtually absent. Moreover, the introduction of European subspecies constantly failed in the Cape region. We therefore hypothesize a low human impact on genetic variation in populations of Cape honeybees, Apis mellifera capensis. A novel solution to studying genetic variation in honeybee populations based on thelytokous worker reproduction is applied to test this hypothesis. Environmental effects on metrical morphological characters of the phenotype are separated to obtain a genetic residual component. The genetic residuals are then re-calculated as coefficients of genetic variation. Characters measured included hair length on the abdomen, width and length of wax plate, and three wing angles. The data show for the first time that genetic variation in Cape honeybee populations is independent of beekeeping density and probably reflects naturally occurring processes such as gene flow due to topographic and climatic variation on a microscale.

  14. Parasitic Cape honeybee workers, Apis mellifera capensis, evade policing

    Science.gov (United States)

    Martin, Stephen J.; Beekman, Madeleine; Wossler, Theresa C.; Ratnieks, Francis L. W.

    2002-01-01

    Relocation of the Cape honeybee, Apis mellifera capensis, by bee-keepers from southern to northern South Africa in 1990 has caused widespread death of managed African honeybee, A. m. scutellata, colonies. Apis mellifera capensis worker bees are able to lay diploid, female eggs without mating by means of automictic thelytoky (meiosis followed by fusion of two meiotic products to restore egg diploidy), whereas workers of other honeybee subspecies are able to lay only haploid, male eggs. The A. m. capensis workers, which are parasitizing and killing A. m. scutellata colonies in northern South Africa, are the asexual offspring of a single, original worker in which the small amount of genetic variation observed is due to crossing over during meiosis (P. Kryger, personal communication). Here we elucidate two principal mechanisms underlying this parasitism. Parasitic A. m. capensis workers activate their ovaries in host colonies that have a queen present (queenright colonies), and they lay eggs that evade being killed by other workers (worker policing)-the normal fate of worker-laid eggs in colonies with a queen. This unique parasitism by workers is an instance in which a society is unable to control the selfish actions of its members.

  15. Polymorphism analysis of csd gene in six Apis mellifera subspecies.

    Science.gov (United States)

    Wang, Zilong; Liu, Zhiyong; Wu, Xiaobo; Yan, Weiyu; Zeng, Zhijiang

    2012-03-01

    The complementary sex determination (csd) gene is the primary gene determining the gender of honey bees (Apis spp). In this study we analyzed the polymorphism of csd gene in six Apis mellifera subspecies. The genomic region 3 of csd gene in these six A. mellifera was cloned, and identified. A total of 79 haplotypes were obtained from these six subspecies. Analysis showed that region 3 of csd gene has a high level of polymorphism in all the six A. mellifera subspecies. The A. m. anatolica subspecies has a slightly higher nucleotide diversity (π) than other subspecies, while the π values showed no significant difference among the other five subspecies. The phylogenetic tree showed that all the csd haplotypes from different A. mellifera subspecies are scattered throughout the tree, without forming six different clades. Population differentiation analysis showed that there are significant genetic differentiations among some of the subspecies. The NJ phylogenetic tree showed that the A. m. caucasica and A. m. carnica have the closest relationship, followed by A. m. ssp, A. m. ligustica, A. m. carpatica and A. m. anatolica that were gathered in the tree in turn.

  16. Evaluation of the API ATB 32C system for the rapid identification of foodborne yeasts.

    Science.gov (United States)

    Rohm, H; Lechner, F; Lehner, M

    1990-12-01

    The commercial API ATB 32C identification kit was compared with a standard method for identifying 11 reference strains and 53 yeast strains isolated from fermented milk products. Approx. 50% of the species considered in the API ATB 32C database were identified on a level of good, very good, and excellent identification. The numerical profile of 25 strains was not found in the API ATB 32C index. Low discrimination or misidentification was observed in seven strains. The low reliability of the API ATB 32C system may be ascribed to the incomplete nature of the profile index. A majority (91%) of the strains, however, were identified correctly by the API ATB 32C strip test results in combination with the commercial computer program of Barnett et al. (1985). This combined procedure offers the possibility to identify any out of 497 species considered by Barnett et al. (1985).

  17. 往复压缩机标准API-618、API-11P的异同点及其应用浅谈%The Similarities and Differences of Reciprocating Compressor Standards of API-618 and API-11P and Discussion of Its Application

    Institute of Scientific and Technical Information of China (English)

    李明悦; 扈滨

    2011-01-01

    PI Standard 618 and API Specification 11P are the standards for reciprocating compressors by American Petroleum Institute ( API) .This paper has speeified the applications of the two standards in the compressors which used in the Cas Treatment Plant of SES natural gas pmject.And the similarities and differences between them are compared.%API Standard 618和API Specification 11P都是美国石油学会(API)针对往复压缩机制定的标准.结合中海石油SES天然气项目中的气体处理厂压缩机单元对这两个标准的应用,对两者之间的异同点进行比较.

  18. Towards Standardized Patient Data Exchange: Integrating a FHIR Based API for the Open Medical Record System.

    Science.gov (United States)

    Kasthurirathne, Suranga N; Mamlin, Burke; Grieve, Grahame; Biondich, Paul

    2015-01-01

    Interoperability is essential to address limitations caused by the ad hoc implementation of clinical information systems and the distributed nature of modern medical care. The HL7 V2 and V3 standards have played a significant role in ensuring interoperability for healthcare. FHIR is a next generation standard created to address fundamental limitations in HL7 V2 and V3. FHIR is particularly relevant to OpenMRS, an Open Source Medical Record System widely used across emerging economies. FHIR has the potential to allow OpenMRS to move away from a bespoke, application specific API to a standards based API. We describe efforts to design and implement a FHIR based API for the OpenMRS platform. Lessons learned from this effort were used to define long term plans to transition from the legacy OpenMRS API to a FHIR based API that greatly reduces the learning curve for developers and helps enhance adhernce to standards.

  19. The Ruby UCSC API: accessing the UCSC genome database using Ruby

    Directory of Open Access Journals (Sweden)

    Mishima Hiroyuki

    2012-09-01

    Full Text Available Abstract Background The University of California, Santa Cruz (UCSC genome database is among the most used sources of genomic annotation in human and other organisms. The database offers an excellent web-based graphical user interface (the UCSC genome browser and several means for programmatic queries. A simple application programming interface (API in a scripting language aimed at the biologist was however not yet available. Here, we present the Ruby UCSC API, a library to access the UCSC genome database using Ruby. Results The API is designed as a BioRuby plug-in and built on the ActiveRecord 3 framework for the object-relational mapping, making writing SQL statements unnecessary. The current version of the API supports databases of all organisms in the UCSC genome database including human, mammals, vertebrates, deuterostomes, insects, nematodes, and yeast. The API uses the bin index—if available—when querying for genomic intervals. The API also supports genomic sequence queries using locally downloaded *.2bit files that are not stored in the official MySQL database. The API is implemented in pure Ruby and is therefore available in different environments and with different Ruby interpreters (including JRuby. Conclusions Assisted by the straightforward object-oriented design of Ruby and ActiveRecord, the Ruby UCSC API will facilitate biologists to query the UCSC genome database programmatically. The API is available through the RubyGem system. Source code and documentation are available at https://github.com/misshie/bioruby-ucsc-api/ under the Ruby license. Feedback and help is provided via the website at http://rubyucscapi.userecho.com/.

  20. Efeito da temperatura interpasse na microestrutura, tenacidade ao impacto e propagação de trinca por fadiga de uniões soldadas por GTAW do aço ASTM A743-CA6NM Interpass temperature influence on the microstructure, impact toughness and fatigue crack propagation in ASTM A743-CA6NM GTAW welded joints

    Directory of Open Access Journals (Sweden)

    Ruimar Rubens de Gouveia

    2013-06-01

    Full Text Available Atualmente os aços inoxidáveis martensíticos tem sido utilizados para a fabricação de turbinas hidráulicas, devido principalmente a sua elevada tenacidade. Entretanto, estes aços apresentam algumas restrições com relação à regiões recuperadas por soldagem, principalmente em razão da formação de martensita não revenida, a qual gera redução na tenacidade. Considerando as aplicações de reparo de turbinas hidráulicas, há grande interesse em desenvolver procedimentos de soldagem que elevem a tenacidade ao impacto e evitem os tratamentos térmicos pós-soldagem (TTPS. O presente trabalho busca analisar a influência da temperatura de interpasse na microestrutura, tenacidade ao impacto e propagação de trincas por fadiga nas uniões soldadas multipasse do aço inoxidável martensitico CA6NM usando AWS410NiMo como metal de adição, e processo TIG (tungsten inert gas. Observou-se a influência da temperatura de interpasse na formação de ferrita d, com formação intergranular no campo bifásico δ+γ, na amostra com temperatura interpasse de 80ºC, enquanto que na amostra soldada a 150ºC a formação de ferrita d ocorreu principalmente no campo monofásico. A alteração na formação da ferrita d, com a menor temperatura, promoveu um aumento na tenacidade ao impacto e uma diminuição na velocidade de propagação de trinca, quando comparada com a amostra soldada com maior temperatura de soldagem. Os resultados obtidos indicam que o processo TIG apresenta-se como uma excelente alternativa para o reparo do aço CA6NM, observando-se também uma influência significativa da temperatura de interpasse.Martensitic stainless steels have been used for hydraulic turbines manufacturing, because its high toughness. However, these steels have some restrictions regarding regions recovered by welding, mainly by non-tempered martensite formation, promoting toughness reduction. Concerning hydraulic turbine repairs, there is a great interest

  1. Asynchronous API Pattern and its Application%异步接口模式及其应用

    Institute of Scientific and Technical Information of China (English)

    何华海; 丁柯

    2002-01-01

    In distributed systems,high efficiency can be achieved using asynchronous API between client and server.This paper provides an architectural pattern that implements asynchronous API generally. Asynchronous methods donot execute operations directly,however,they delegate the sending and receiving process to individual threads via aqueue ,the client deals with results by means of callback ,wait or check. Synchronous API is implemented on the baseof asynchronous API. Presently the asynchronous API pattern has been employed in the implementation of messagequeue middleware ISMQ.

  2. Research on API Based on Visual Programming Platforms%基于可视化平台的 API 接口研究

    Institute of Scientific and Technical Information of China (English)

    关玉蓉

    2015-01-01

    In a variety of visual programming platforms, especially with the external network environment, , a large number of API functions under Windows can help reflect strong advanced programming skills proving to be a multiplier effect. This paper firstly introduces the API function and the dynamic link library DLL, then briefly ex-plains the classification of API functions, and focuses on how to call the API function and its application of API function in the visual platform. The paper finally describes the skills and notes to pay attention for users when call-ing the API function, which enables them to master the advanced programming skills of API interface.%在各种可视化编程平台中,尤其是与外部网络环境相结合,为了体现强大的高级编程能力,可用Windows系统提供的大量API函数,必然会起到事半功倍的效果。本文首先介绍了API函数以及动态链接库DLL,其次简要说明了API函数的分类,然后重点分析了在可视化平台中如何调用API函数及其应用API函数的高级编程能力,最后阐述了用户调用API函数的技巧和注意事项,以提高用户灵活掌握API接口的高级编程应用能力。

  3. API5 confers cancer stem cell-like properties through the FGF2-NANOG axis

    Science.gov (United States)

    Song, K-H; Cho, H; Kim, S; Lee, H-J; Oh, S J; Woo, S R; Hong, S-O; Jang, H S; Noh, K H; Choi, C H; Chung, J-Y; Hewitt, S M; Kim, J-H; Son, M; Kim, S-H; Lee, B I; Park, H-C; Bae, Y-K; Kim, T W

    2017-01-01

    Immune selection drives the evolution of tumor cells toward an immune-resistant and cancer stem cell (CSC)-like phenotype. We reported that apoptosis inhibitor-5 (API5) acts as an immune escape factor, which has a significant role in controlling immune resistance to antigen-specific T cells, but its functional association with CSC-like properties remains largely unknown. In this study, we demonstrated for the first time that API5 confers CSC-like properties, including NANOG expression, the frequency of CD44-positive cells and sphere-forming capacity. Critically, these CSC-like properties mediated by API5 are dependent on FGFR1 signaling, which is triggered by E2F1-dependent FGF2 expression. Furthermore, we uncovered the FGF2-NANOG molecular axis as a downstream component of API5 signaling that is conserved in cervical cancer patients. Finally, we found that the blockade of FGFR signaling is an effective strategy to control API5high human cancer. Thus, our findings reveal a crucial role of API5 in linking immune resistance and CSC-like properties, and provide the rationale for its therapeutic application for the treatment of API5+ refractory tumors. PMID:28092370

  4. Apoptosis inhibitor 5 (API-5; AAC-11; FIF) is upregulated in human carcinomas in vivo.

    Science.gov (United States)

    Koci, Lenka; Chlebova, Katarina; Hyzdalova, Martina; Hofmanova, Jirina; Jira, Miroslav; Kysela, Petr; Kozubik, Alois; Kala, Zdenek; Krejci, Pavel

    2012-04-01

    Apoptosis inhibitor 5 (API-5) is a 55 kDa nuclear protein with potent anti-apoptotic signaling in tumor cells in vitro. In this study, we analyzed the expression of the API-5 protein in vivo in a broad spectrum of human carcinomas, including those of the colon, lung, liver, kidney, pancreas, stomach and esophagus using tumor tissues obtained during tumor resection. The results showed significant upregulation of API-5 expression in biopsies of lung (23%, n=13) and colorectal tumors (33%, n=27) in comparison with biopsies from the adjacent normal tissue. Colon cancer biopsies were used to study the cell populations with an upregulated level of expression of API-5 more closely. Using a magnetic bead-based selection for the epithelial cell marker EpCAM, we purified epithelial cells from the tumor and control tissues and analyzed these cells for API-5 expression by western immunoblotting. We observed that EpCAM-positive tumor cells expressed API-5 in all three colorectal cancer cases tested, in contrast to the control EpCAM-positive and EpCAM-negative cells isolated from the control or tumor tissues. These data suggest that the expression of the API-5 protein is upregulated in tumor epithelial cells and may serve as a prognostic marker in colorectal cancer.

  5. api, A novel Medicago truncatula symbiotic mutant impaired in nodule primordium invasion.

    Science.gov (United States)

    Teillet, Alice; Garcia, Joseph; de Billy, Françoise; Gherardi, Michèle; Huguet, Thierry; Barker, David G; de Carvalho-Niebel, Fernanda; Journet, Etienne-Pascal

    2008-05-01

    Genetic approaches have proved to be extremely useful in dissecting the complex nitrogen-fixing Rhizobium-legume endosymbiotic association. Here we describe a novel Medicago truncatula mutant called api, whose primary phenotype is the blockage of rhizobial infection just prior to nodule primordium invasion, leading to the formation of large infection pockets within the cortex of noninvaded root outgrowths. The mutant api originally was identified as a double symbiotic mutant associated with a new allele (nip-3) of the NIP/LATD gene, following the screening of an ethylmethane sulphonate-mutagenized population. Detailed characterization of the segregating single api mutant showed that rhizobial infection is also defective at the earlier stage of infection thread (IT) initiation in root hairs, as well as later during IT growth in the small percentage of nodules which overcome the primordium invasion block. Neither modulating ethylene biosynthesis (with L-alpha-(2-aminoethoxyvinylglycine or 1-aminocyclopropane-1-carboxylic acid) nor reducing ethylene sensitivity in a skl genetic background alters the basic api phenotype, suggesting that API function is not closely linked to ethylene metabolism or signaling. Genetic mapping places the API gene on the upper arm of the M. truncatula linkage group 4, and epistasis analyses show that API functions downstream of BIT1/ERN1 and LIN and upstream of NIP/LATD and the DNF genes.

  6. Investigation into process-induced de-aggregation of cohesive micronised API particles.

    Science.gov (United States)

    Hoffmann, Magnus; Wray, Patrick S; Gamble, John F; Tobyn, Mike

    2015-09-30

    The aim of this study was to assess the impact of unit processes on the de-aggregation of a cohesive micronised API within a pharmaceutical formulation using near-infrared chemical imaging. The impact on the primary API particles was also investigated using an image-based particle characterization system with integrated Raman analysis. The blended material was shown to contain large, API rich domains which were distributed in-homogeneously across the sample, suggesting that the blending process was not aggressive enough to disperse aggregates of micronised drug particles. Cone milling, routinely used to improve the homogeneity of such cohesive formulations, was observed to substantially reduce the number and size of API rich domains; however, several smaller API domains survived the milling process. Conveyance of the cone milled formulation through the Alexanderwerk WP120 powder feed system completely dispersed all remaining aggregates. Importantly, powder feed transmission of the un-milled formulation was observed to produce an equally homogeneous API distribution. The size of the micronised primary drug particles remained unchanged during powder feed transmission. These findings provide further evidence that this powder feed system does induce shear, and is in fact better able to disperse aggregates of a cohesive micronised API within a blend than the blend-mill-blend step.

  7. AES Encryption and Decryption Using Direct3D 10 API

    CERN Document Server

    Chiuta, Adrian Marius

    2012-01-01

    Current video cards (GPUs - Graphics Processing Units) are very programmable, have become much more powerful than the CPUs and they are very affordable. In this paper, we present an implementation for the AES algorithm using Direct3D 10 certified GPUs. The graphics API Direct3D 10 is the first version that allows the use of integer operations, making from the traditional GPUs (that works only with floating point numbers), General Purpose GPUs that can be used for a large number of algorithms, including encryption. We present the performance of the symmetric key encryption algorithm - AES, on a middle range GPU and on a middle range quad core CPU. On the testing system, the developed solution is almost 3 times faster on the GPU than on one single core CPU, showing that the GPU can perform as an efficient cryptographic accelerator.

  8. AES Encryption and Decryption Using Direct3D 10 API

    Directory of Open Access Journals (Sweden)

    Adrian Marius Chiuta

    2011-06-01

    Full Text Available Current video cards (GPUs – Graphics Processing Units are very programmable, have become much more powerful than the CPUs and they are very affordable. In this paper, we present an implementation for the AES algorithm using Direct3D 10 certified GPUs. The graphics API Direct3D 10 is the first version that allows the use of integer operations, making from the traditional GPUs (that works only with floating point numbers, General Purpose GPUs that can be used for a large number of algorithms, including encryption. We present the performance of the symmetric key encryption algorithm – AES, on a middle range GPU and on a middle range quad core CPU. On the testing system, the developed solution is almost 3 times faster on the GPU than on one single core CPU, showing that the GPU can perform as an efficient cryptographic accelerator.

  9. EDGE REMOVAL OF 3D POLYGONAL MODEL USING MAYA API

    Directory of Open Access Journals (Sweden)

    SAMEER ARORA

    2010-09-01

    Full Text Available In various applications of computer graphics, 3D polygonal modeling is used, which consists millions of triangular polygon. In this polygon attributes – vertices, edges and faces’ details are to be stored. In order to control the processing time, storing space, and transfer speed, it is often required to reduce the information ofthese polygonal 3D models. In this paper an effort is made to reduce the number of edges. There are various methods to reduce faces and edges of these 3D models. A C++ dynamic link library as Maya Plugin has been created to remove number of edges of 3D triangular polygon model using the Quadric Error Metrics (QEM in MAYA v2010 x64 API. QEM allows fast and accurate geometric simplification of 3D models.

  10. Pheromonal contest between honeybee workers ( Apis mellifera capensis)

    Science.gov (United States)

    Moritz, R. F. A.; Simon, U. E.; Crewe, R. M.

    2000-10-01

    Queenless workers of the Cape honeybee ( Apis mellifera capensis) can develop into reproductives termed pseudoqueens. Although they morphologically remain workers they become physiologically queenlike, produce offspring, and secrete mandibular gland pheromones similar to those of true queens. However, after queen loss only very few workers gain pseudoqueen status. A strong intracolonial selection governs which workers start oviposition and which remain sterile. The "queen substance", 9-keto-2(E)-decenoic acid (9-ODA), the dominant compound of the queen's mandibular gland pheromones, suppresses the secretion of queenlike mandibular gland pheromones in workers. It may act as an important signal in pseudoqueen selection. By analysing the mandibular gland pheromones of workers kept in pairs, we found that A. m. capensis workers compete to produce the strongest queen-like signal.

  11. A non-policing honey bee colony (Apis mellifera capensis)

    Science.gov (United States)

    Beekman, Madeleine; Good, Gregory; Allsopp, Mike; Radloff, Sarah; Pirk, Chris; Ratnieks, Francis

    2002-09-01

    In the Cape honey bee Apis mellifera capensis, workers lay female eggs without mating by thelytokous parthenogenesis. As a result, workers are as related to worker-laid eggs as they are to queen-laid eggs and therefore worker policing is expected to be lower, or even absent. This was tested by transferring worker- and queen-laid eggs into three queenright A. m. capensis discriminator colonies and monitoring their removal. Our results show that worker policing is variable in A. m. capensis and that in one colony worker-laid eggs were not removed. This is the first report of a non-policing queenright honey bee colony. DNA microsatellite and morphometric analysis suggests that the racial composition of the three discriminator colonies was different. The variation in policing rates could be explained by differences in degrees of hybridisation between A. m. capensis and A. m. scutellata, although a larger survey is needed to confirm this.

  12. API, Cloud computing, WebGIS and cartography

    Directory of Open Access Journals (Sweden)

    Andrea Favretto

    2013-05-01

    Full Text Available This paper explores some of the digital mapping processes available on the Internet in order to analyse their cartographic congruence. It will focus on WebGIS-based cartography in relation to what is produced using Mash-up site maps. These websites often use Googlebased maps in order to produce their own cartography. Thus, we can identify two main typologies of Internet mapping sites, which are characterized by the ownership or non-ownership of their cartographic bases. This paper will critically assess the cartography employed in the two different instances. A concise introduction to the Cloud Computing Internet propagated phenomenon is also premised in order to provide the reader with an accurate frame of reference. Cloud Computing has encouraged a significant Internet participation via the Application Programming Interface software (API, leading to mash-up cartographic websites.

  13. Sperm use economy of honeybee (Apis mellifera) queens

    DEFF Research Database (Denmark)

    Baer, Boris; Collins, Jason; Maalaps, Kristiina

    2016-01-01

    The queens of eusocial ants, bees, and wasps only mate during a very brief period early in life to acquire and store a lifetime supply of sperm. As sperm cannot be replenished, queens have to be highly economic when using stored sperm to fertilize eggs, especially in species with large and long......-lived colonies. However, queen fertility has not been studied in detail, so that we have little understanding of how economic sperm use is in different species, and whether queens are able to influence their sperm use. This is surprising given that sperm use is a key factor of eusocial life, as it determines...... the fecundity and longevity of queens and therefore colony fitness. We quantified the number of sperm that honeybee (Apis mellifera) queens use to fertilize eggs. We examined sperm use in naturally mated queens of different ages and in queens artificially inseminated with different volumes of semen. We found...

  14. Genetic structure of Apis mellifera macedonica in the Balkan Peninsula based on microsatellite DNA polymorphism

    DEFF Research Database (Denmark)

    Uzunov, Aleksandar; Meixner, Marina D; Kiprijanovska, Hrisula;

    2014-01-01

    The genetic variability of honey bees (Apis mellifera L.) from south eastern Europe was investigated using microsatellite analyses of 107 samples from Albania, the Republic of Macedonia, Greece and Bulgaria together with 42 reference samples (Apis mellifera carnica) from Slovenia. Genetic structure...... and spatial analyses of the microsatellite data showed a clear distinction between the Slovenian bees and all other populations, and confirmed the existence of Apis mellifera macedonica as an indigenous honey bee population in the regions that were sampled. In most areas however, varying degrees...

  15. WYSIWIB: Exploiting Fine-Grained Program Structure in a Scriptable API-Usage Protocol Finding Process

    DEFF Research Database (Denmark)

    Lawall, Julia; Brunel, Julien Pierre Manuel; Palix, Nicolas Jean-Michel

    2013-01-01

    functions, which we refer to as API protocols. Our approach builds on the Coccinelle program matching and transformation tool, which allows a user to construct patterns that reflect the structure of the code to be matched. We evaluate our approach on the source code of the Linux kernel, which defines a very...... large number of API functions with varying properties. Linux is also critical software, implying that fixing even bugs involving rarely used protocols is essential. In our experiments, we use our approach to find over 3000 potential API protocols, with an estimated false positive rate of under 15...

  16. Clarification of some api characteristics in relation to caribou (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    William O. Pruitt, Jr.

    1990-09-01

    Full Text Available A total of 2177 comparisons of api hardness vs. density in northern Saskatchewan, southeastern Manitoba and northeastern Finland revealed no consistent correlation (r varied from +.70 to -.17. A total of 1395 comparisons of horizontal hardness of the top layer of api to vertical hardness of the same layer of api in southeastern Manitoba, northeastern Finland and far eastern middle Finland revealed no consistent correlation (r varied from +.99 to -.20. Therefore one cannot substitute density for hardness nor horizontal hardness of the top layer for vertical hardness of the top layer in the terms of the Värriö Snow Index.

  17. The Arabidopsis apyrase AtAPY1 is localized in the Golgi instead of the extracellular space

    Directory of Open Access Journals (Sweden)

    Schiller Madlen

    2012-07-01

    Full Text Available Abstract Background The two highly similar Arabidopsis apyrases AtAPY1 and AtAPY2 were previously shown to be involved in plant growth and development, evidently by regulating extracellular ATP signals. The subcellular localization of AtAPY1 was investigated to corroborate an extracellular function. Results Transgenic Arabidopsis lines expressing AtAPY1 fused to the SNAP-(O6-alkylguanine-DNA alkyltransferase-tag were used for indirect immunofluorescence and AtAPY1 was detected in punctate structures within the cell. The same signal pattern was found in seedlings stably overexpressing AtAPY1-GFP by indirect immunofluorescence and live imaging. In order to identify the nature of the AtAPY1-positive structures, AtAPY1-GFP expressing seedlings were treated with the endocytic marker stain FM4-64 (N-(3-triethylammoniumpropyl-4-(p-diethylaminophenyl-hexatrienyl-pyridinium dibromide and crossed with a transgenic line expressing the trans-Golgi marker Rab E1d. Neither FM4-64 nor Rab E1d co-localized with AtAPY1. However, live imaging of transgenic Arabidopsis lines expressing AtAPY1-GFP and either the fluorescent protein-tagged Golgi marker Membrin 12, Syntaxin of plants 32 or Golgi transport 1 protein homolog showed co-localization. The Golgi localization was confirmed by immunogold labeling of AtAPY1-GFP. There was no indication of extracellular AtAPY1 by indirect immunofluorescence using antibodies against SNAP and GFP, live imaging of AtAPY1-GFP and immunogold labeling of AtAPY1-GFP. Activity assays with AtAPY1-GFP revealed GDP, UDP and IDP as substrates, but neither ATP nor ADP. To determine if AtAPY1 is a soluble or membrane protein, microsomal membranes were isolated and treated with various solubilizing agents. Only SDS and urea (not alkaline or high salt conditions were able to release the AtAPY1 protein from microsomal membranes. Conclusions AtAPY1 is an integral Golgi protein with the substrate specificity typical for Golgi apyrases. It is

  18. IgE recognition of chimeric isoforms of the honeybee (Apis mellifera) venom allergen Api m 10 evaluated by protein array technology.

    Science.gov (United States)

    Van Vaerenbergh, Matthias; De Smet, Lina; Rafei-Shamsabadi, David; Blank, Simon; Spillner, Edzard; Ebo, Didier G; Devreese, Bart; Jakob, Thilo; de Graaf, Dirk C

    2015-02-01

    Api m 10 has recently been established as novel major allergen that is recognized by more than 60% of honeybee venom (HBV) allergic patients. Previous studies suggest Api m 10 protein heterogeneity which may have implications for diagnosis and immunotherapy of HBV allergy. In the present study, RT-PCR revealed the expression of at least nine additional Api m 10 transcript isoforms by the venom glands. Two distinct mechanisms are responsible for the generation of these isoforms: while the previously known variant 2 is produced by an alternative splicing event, novel identified isoforms are intragenic chimeric transcripts. To the best of our knowledge, this is the first report of the identification of chimeric transcripts generated by the honeybee. By a retrospective proteomic analysis we found evidence for the presence of several of these isoforms in the venom proteome. Additionally, we analyzed IgE reactivity to different isoforms by protein array technology using sera from HBV allergic patients, which revealed that IgE recognition of Api m 10 is both isoform- and patient-specific. While it was previously demonstrated that the majority of HBV allergic patients display IgE reactivity to variant 2, our study also shows that some patients lacking IgE antibodies for variant 2 display IgE reactivity to two of the novel identified Api m 10 variants, i.e. variants 3 and 4.

  19. Histochemical Comparison of the Hypopharyngeal Gland in Apis cerana Fabricius, 1793 Workers and Apis mellifera Linnaeus, 1758 Workers

    Directory of Open Access Journals (Sweden)

    Guntima Suwannapong

    2010-01-01

    Full Text Available Hypopharyngeal glands of honeybee are age-dependent structures that change with the size of acini and are correlated with various social behaviors. The histochemical structure of Apis cerana and A. mellifera worker hypopharyngeal glands in four different developmental stages wes stained with ninhydrin Schiff's and periodic acid Schiff's reagents (PAS for localization of proteins and carbohydrates, respectively, and examined with light microscopy. Nurse bees of both honeybee species had significantly larger glands as compared to guards and forgers, but there were no statistically significant differences between these two species after accounting for caste. Gland protein concentration increased progressively in nurse bees, and this was correlated with the appearance of enriched protein granules in the cytoplasm. In addition, the hypopharyngeal gland protein concentration of A. mellifera was higher than that of A. cerana even though gland size was not significantly different between species. However, gland size was shown to have decreased progressively in foragers and guards.

  20. Homology differences between complete Sacbrood virus genomes from infected Apis mellifera and Apis cerana honeybees in Korea.

    Science.gov (United States)

    Reddy, Kondreddy Eswar; Yoo, Mi Sun; Kim, Young-Ha; Kim, Nam-Hee; Ramya, Mummadireddy; Jung, Ha-Na; Thao, Le Thi Bich; Lee, Hee-Soo; Kang, Seung-Won

    2016-04-01

    Sacbrood virus (SBV) represents a serious threat to the health of managed honeybees. We determined four complete SBV genomic sequences (AmSBV-Kor1, AmSBV-Kor2, AcSBV-Kor3, and AcSBV-Kor4) isolated from Apis mellifera and Apis cerana in various regions of South Korea. A phylogenetic tree was constructed from the complete genomic sequences of these Korean SBVs (KSBVs) and 21 previously reported SBV sequences from other countries. Three KSBVs (not AmSBV-Kor1) clustered with previously reported Korean genomes, but separately from SBV genomes from other countries. The KSBVs shared 90-98 % identity, and 89-97 % identity with the genomes from other countries. AmSBV-Kor1 was least similar (~90 % identity) to the other KSBVs, and was most similar to previously reported strains AmSBV-Kor21 (97 %) and AmSBV-UK (93 %). Phylogenetic analysis of the partial VP1 region sequences indicated that SBVs clustered by host species and country of origin. The KSBVs were aligned with nine previously reported complete SBV genomes and compared. The KSBVs were most different from the other genomes at the end of the 5' untranslated region and in the entire open reading frame. A SimPlot graph of the VP1 region confirmed its high variability, especially between the SBVs infecting A. mellifera and A. cerana. In this genomic region, SBVs from A. mellifera species contain an extra continuous 51-nucleotide sequence relative to the SBVs from A. cerana. This genomic diversity may reflect the adaptation of SBV to specific hosts, viral cross-infections, and the spatial distances separating the KSBVs from other SBVs.

  1. BUILDING MODEL ANALYSIS APPLICATIONS WITH THE JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY (JUPITER) API

    Science.gov (United States)

    The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input ...

  2. Fast Synchronization In IVR Using REST API For HTML5 And AJAX

    National Research Council Canada - National Science Library

    Sandeep Kailuke; Nekita Chavhan

    2014-01-01

    .... IVR system uses REST API for data access while calling. When in call process user want to access data, server need to validate it and while validation data accessing must be synchronize with mysql server...

  3. Telephone Interpreter Services (TIS)-Asian and Pacific Islander (API) Language Yearly Dataset

    Data.gov (United States)

    Social Security Administration — This dataset displays our national TIS call volume for over 45 API languages for the last three fiscal years. A fiscal year runs from October through September. We...

  4. Telephone Interpreter Services (TIS)-Asian and Pacific Islander (API) Language Fiscal Year Quarterly Dataset

    Data.gov (United States)

    Social Security Administration — This dataset displays our quarterly national TIS call volume for over 45 API languages for the current fiscal year. A fiscal year runs from October through September...

  5. S E- GEOD-50881 Study Samples --- Candida albicans response to spaceflight (NASA STS-115) API

    Data.gov (United States)

    National Aeronautics and Space Administration — A fully queryable REST API with JSON, XML, and CSV output as well as inline, runable examples using data from the transcriptional profiling and phenotypic...

  6. A E- GEOD-50881 Gene Chip Assay --- Candida albicans response to spaceflight (NASA STS-115) API

    Data.gov (United States)

    National Aeronautics and Space Administration — A fully queryable REST API with JSON, XML, and CSV output as well as inline, runable examples using data from the transcriptional profiling and phenotypic...

  7. Candida albicans response to spaceflight (NASA STS-115) --- GSM1231690_Slide_43 API

    Data.gov (United States)

    National Aeronautics and Space Administration — A fully queryable REST API with JSON, XML, and CSV output as well as inline, runable examples using data from the transcriptional profiling and phenotypic...

  8. Bilingual education, indigenous language and culture: the case of Apyãwa Tapirapé

    Directory of Open Access Journals (Sweden)

    Maria Gorete Neto

    Full Text Available Bilingual schools are recognized as an important resource to increase the chances of language survival but in many cases have proven to be ineffective. Within the Apyãwa Tapirapé Indian Tribe (central Brazil, an effective bilingual school does exist; however, this study shows that even a successful school brings complications for the community. Audio-recorded interviews, in which teachers and leaders discuss their bilingual school and its consequences for the Apyãwa Tapirapé people, reveal that they feel that the school has changed the Apyãwa Tapirapé lifestyle in both negative and positive ways. A continuous evaluation and ongoing reconstruction of educational aspects is proposed as a way to both attend to the needs and to relieve the worries of groups like the Apyãwa Tapirapé with respect to the impact of their school on the community.

  9. A review on the taste masking of bitter APIs: hot-melt extrusion (HME) evaluation.

    Science.gov (United States)

    Maniruzzaman, Mohammed; Boateng, Joshua S; Chowdhry, Babur Z; Snowden, Martin J; Douroumis, Dennis

    2014-02-01

    The majority of active pharmaceutical ingredients (APIs) found in oral dosage forms have a bitter taste. Masking the unpleasant taste of bitter, APIs is a major challenge in the development of such oral dosage forms. Taste assessment is an important quality-control parameter for evaluating taste-masked formulations of any new molecular entity. Hot-melt extrusion (HME) techniques, have very recently, been accepted from an industrial compliance viewpoint in relation to both manufacturing operations and development of pharmaceuticals. HME achieves taste masking of bitter APIs via various mechanisms such as the formation of solid dispersions and inter-molecular interactions and this has led to its wide-spread use in pharmaceutical formulation research. In this article, the uses of various taste evaluation methods and HME as continuous processing techniques for taste masking of bitter APIs used for the oral delivery of drugs are reviewed.

  10. Dosis Letal Media (DL50 de algunos aceites esenciales y biocidas efectivos para el control de Ascosphaera apis en Apis mellifera L. - Median Lethal Dose (LD50 of some essential oils and biocides effective for the control of Ascosphaera apis on Apis mellifera L

    Directory of Open Access Journals (Sweden)

    Albo, Graciela N

    2010-10-01

    Full Text Available ResumenLa ascofaeriosis o cría yesificada, es una enfermedad de la abeja melífera (Apis mellifera L. causada por el hongo Ascosphaera apis que produce la momificación de las larvas. Los aceites esenciales poseen efectos antimicrobianos y han sido utilizados para el control de cría yesificada. Por otra parte, a nivel mundial se han probado gran cantidad de productos de síntesis, pero ninguno ha resultado 100 % eficaz. SummaryChalkbrood is a disease of the honeybee (Apis mellifera L caused by the fungus Ascosphaera apis that transforms larvae into mummies. Essential oils have showed antimicrobial activity and have been used in the control of chalkbrood. Moreover, world-wide, great number of synthesized products have been assayed but no one has resulted 100% effective.

  11. Three-dimensional model of the honeybee venom allergen Api m 7: structural and functional insights.

    Science.gov (United States)

    Georgieva, Dessislava; Greunke, Kerstin; Betzel, Christian

    2010-06-01

    Api m 7 is one of the major protease allergens of the honeybee venom. It consists of a serine protease-like (SPL) and a CUB domain. The knowledge about the structure and function of Api m 7 is limited mainly to its amino acid sequence. Three-dimensional models of the two structural domains were constructed using their amino acid sequences and the crystallographic coordinates of prophenoloxidase-activating factor (PPAF-II) as a template for the SPL domain and the coordinates of porcine spermadhesin PSP-II for the CUB domain. The structural organization of Api m 7 suggests that the CUB domain is involved in interactions with natural substrates while the SPL domain probably activates zymogens. IgE epitopes and antigenic sites were predicted. Api m 7 shows structural and functional similarity to the members of the PPAF-II family. Possible substrates, function and evolution of the enzyme are discussed in the paper.

  12. Antagonistic Effect of Gut Bacteria in the Hybrid Carniolan Honey Bee, Apis Mellifera Carnica, Against Ascosphaera Apis, the Causal Organism of Chalkbrood Disease

    Directory of Open Access Journals (Sweden)

    Omar Mohamed O. M.

    2014-06-01

    Full Text Available The objective of this study was to isolate and characterize bacterial strains associated with the gut of the hybrid Carniolan honey bee, Apis mellifera carnica, and to determine their in vitro and in vivo potential against Ascosphaera apis, the causal organism of chalkbrood disease, with the purpose of exploring feasible biological control. Six bacterial strains were isolated from healthy worker honey bees by culture-dependent methods. Six fungal strains (A3, A4, A7, A8, A9, and A15 of A. apis were isolated from larvae suffering from chalkbrood disease on Yeast-Glucose-Starch agar (YGPSA medium. All bacteria were identified by a combination of morphology, Gram stain, and 16S rRNA sequence analysis, and fungal strains were identified by morphology and 5.8S rRNA. In vitro and in vivo inhibition assays were carried out to determine the ability of bacterial isolates to inhibit A. apis, the causal agent of chalkbrood disease. The analysis of 16S rRNA sequences revealed that four bacterial strains (B2, B4, B10, and B100 belong to Bacillus subtilis species, and two strains (P1 and P5 belong to Pseudomonas fluorescence. Significant differences in antagonistic activity of all bacterial strains were observed. B. subtilis isolate B2 showed the highest antagonistic activity, as measured by the inhibition zone against A. apis, followed by the P1 strain of P. fluorescence. SEM analysis also supports the antagonistic activity of these bacteria against A. apis. This study provides a theoretical basis for biological control of honey bee chalkbrood disease.

  13. Molecular Identification of Chronic Bee Paralysis Virus Infection in Apis mellifera Colonies in Japan

    OpenAIRE

    Tomomi Morimoto; Yuriko Kojima; Mikio Yoshiyama; Kiyoshi Kimura; Bu Yang; Tatsuhiko Kadowaki

    2012-01-01

    Chronic bee paralysis virus (CBPV) infection causes chronic paralysis and loss of workers in honey bee colonies around the world. Although CBPV shows a worldwide distribution, it had not been molecularly detected in Japan. Our investigation of Apis mellifera and Apis cerana japonica colonies with RT-PCR has revealed CBPV infection in A. mellifera but not A. c. japonica colonies in Japan. The prevalence of CBPV...

  14. MechanoAPI-ILs: Pharmaceutical Ionic Liquids Obtained through Mechanochemical Synthesis.

    Science.gov (United States)

    Martins, Inês C B; Oliveira, M Conceição; Diogo, Hermínio P; Branco, Luís C; Duarte, M Teresa

    2017-04-10

    An alternative, efficient, and green synthetic strategy for the preparation of pharmaceutical ionic liquids using mechanochemistry (MechanoAPI-ILs) is reported. Six new API-ILs based on gabapentin and l-glutamic acid were successfully synthesized and characterized, demonstrating that mechanochemistry is a very promising synthetic strategy. Results compare both the new and the classical approach and clearly show the advantages of the new method. This new technique is faster, solvent free, reproducible, selective, and leads to higher yields.

  15. Sensitivity Analysis of Fatigue Crack Growth Model for API Steels in Gaseous Hydrogen

    Science.gov (United States)

    Amaro, Robert L; Rustagi, Neha; Drexler, Elizabeth S; Slifka, Andrew J

    2014-01-01

    A model to predict fatigue crack growth of API pipeline steels in high pressure gaseous hydrogen has been developed and is presented elsewhere. The model currently has several parameters that must be calibrated for each pipeline steel of interest. This work provides a sensitivity analysis of the model parameters in order to provide (a) insight to the underlying mathematical and mechanistic aspects of the model, and (b) guidance for model calibration of other API steels. PMID:26601024

  16. Revoke and Let Live: A Secure Key Revocation API for Cryptographic Devices

    OpenAIRE

    Cortier, Véronique; Steel,Graham; Wiedling, Cyrille

    2012-01-01

    While extensive research addresses the problem of establishing session keys through cryptographic protocols, relatively little work has appeared addressing the problem of revocation and update of long term keys. We present an API for symmetric key management on embedded devices that supports revocation and prove security properties design in the symbolic model of cryptography. Our API supports two modes of revocation: a passive mode where keys have an expiration time, and an active mode where...

  17. Sensitivity Analysis of Fatigue Crack Growth Model for API Steels in Gaseous Hydrogen.

    Science.gov (United States)

    Amaro, Robert L; Rustagi, Neha; Drexler, Elizabeth S; Slifka, Andrew J

    2014-01-01

    A model to predict fatigue crack growth of API pipeline steels in high pressure gaseous hydrogen has been developed and is presented elsewhere. The model currently has several parameters that must be calibrated for each pipeline steel of interest. This work provides a sensitivity analysis of the model parameters in order to provide (a) insight to the underlying mathematical and mechanistic aspects of the model, and (b) guidance for model calibration of other API steels.

  18. A RESTful API for accessing microbial community data for MG-RAST.

    Science.gov (United States)

    Wilke, Andreas; Bischof, Jared; Harrison, Travis; Brettin, Tom; D'Souza, Mark; Gerlach, Wolfgang; Matthews, Hunter; Paczian, Tobias; Wilkening, Jared; Glass, Elizabeth M; Desai, Narayan; Meyer, Folker

    2015-01-01

    Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface) we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us) we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer) implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.

  19. A RESTful API for accessing microbial community data for MG-RAST.

    Directory of Open Access Journals (Sweden)

    Andreas Wilke

    2015-01-01

    Full Text Available Metagenomic sequencing has produced significant amounts of data in recent years. For example, as of summer 2013, MG-RAST has been used to annotate over 110,000 data sets totaling over 43 Terabases. With metagenomic sequencing finding even wider adoption in the scientific community, the existing web-based analysis tools and infrastructure in MG-RAST provide limited capability for data retrieval and analysis, such as comparative analysis between multiple data sets. Moreover, although the system provides many analysis tools, it is not comprehensive. By opening MG-RAST up via a web services API (application programmers interface we have greatly expanded access to MG-RAST data, as well as provided a mechanism for the use of third-party analysis tools with MG-RAST data. This RESTful API makes all data and data objects created by the MG-RAST pipeline accessible as JSON objects. As part of the DOE Systems Biology Knowledgebase project (KBase, http://kbase.us we have implemented a web services API for MG-RAST. This API complements the existing MG-RAST web interface and constitutes the basis of KBase's microbial community capabilities. In addition, the API exposes a comprehensive collection of data to programmers. This API, which uses a RESTful (Representational State Transfer implementation, is compatible with most programming environments and should be easy to use for end users and third parties. It provides comprehensive access to sequence data, quality control results, annotations, and many other data types. Where feasible, we have used standards to expose data and metadata. Code examples are provided in a number of languages both to show the versatility of the API and to provide a starting point for users. We present an API that exposes the data in MG-RAST for consumption by our users, greatly enhancing the utility of the MG-RAST service.

  20. Using DLL as Interface between API an VC#.NET Applications

    Directory of Open Access Journals (Sweden)

    Marian DARDALA

    2006-01-01

    Full Text Available This paper presents a solution for using complex Win32API data structures and functions in Visual C# .NET applications. We built DLL (Dynamic Link Library to manage the API functions and data structures and we used DLL modules in a C# application. This is an easier working way compared with the traditional way of importing and managing API’s functions in C# programs.

  1. Hot-stage microscopy for determination of API particles in a formulated tablet.

    Science.gov (United States)

    Simek, Michal; Grünwaldová, Veronika; Kratochvíl, Bohumil

    2014-01-01

    Although methods exist to readily determine the particle size distribution (PSD) of an active pharmaceutical ingredient (API) before its formulation into a final product, the primary challenge is to develop a method to determine the PSD of APIs in a finished tablet. To address the limitations of existing PSD methods, we used hot-stage microscopy to observe tablet disintegration during temperature change and, thus, reveal the API particles in a tablet. Both mechanical and liquid disintegration were evaluated after we had identified optimum milling time for mechanical disintegration and optimum volume of water for liquid disintegration. In each case, hot-stage micrographs, taken before and after the API melting point, were compared with image analysis software to obtain the PSDs. Then, the PSDs of the APIs from the disintegrated tablets were compared with the PSDs of raw APIs. Good agreement was obtained, thereby confirming the robustness of our methodology. The availability of such a method equips pharmaceutical scientists with an in vitro assessment method that will more reliably determine the PSD of active substances in finished tablets.

  2. The Matchmaker Exchange API: automating patient matching through the exchange of structured phenotypic and genotypic profiles.

    Science.gov (United States)

    Buske, Orion J; Schiettecatte, François; Hutton, Benjamin; Dumitriu, Sergiu; Misyura, Andriy; Huang, Lijia; Hartley, Taila; Girdea, Marta; Sobreira, Nara; Mungall, Chris; Brudno, Michael

    2015-10-01

    Despite the increasing prevalence of clinical sequencing, the difficulty of identifying additional affected families is a key obstacle to solving many rare diseases. There may only be a handful of similar patients worldwide, and their data may be stored in diverse clinical and research databases. Computational methods are necessary to enable finding similar patients across the growing number of patient repositories and registries. We present the Matchmaker Exchange Application Programming Interface (MME API), a protocol and data format for exchanging phenotype and genotype profiles to enable matchmaking among patient databases, facilitate the identification of additional cohorts, and increase the rate with which rare diseases can be researched and diagnosed. We designed the API to be straightforward and flexible in order to simplify its adoption on a large number of data types and workflows. We also provide a public test data set, curated from the literature, to facilitate implementation of the API and development of new matching algorithms. The initial version of the API has been successfully implemented by three members of the Matchmaker Exchange and was immediately able to reproduce previously identified matches and generate several new leads currently being validated. The API is available at https://github.com/ga4gh/mme-apis.

  3. An analysis of multifractal characteristics of API time series in Nanjing, China

    Science.gov (United States)

    Shen, Chen-hua; Huang, Yi; Yan, Ya-ni

    2016-06-01

    This paper describes multifractal characteristics of daily air pollution index (API) records in Nanjing from 2001 to 2012. The entire daily API time series is first divided into 12 parts that serve as research objects, and the generalized Hurst exponent is calculated for each series. And then, the multifractal sources are analyzed and singularity spectra are shown. Next, based on a singularity spectrum, the multifractal-characteristics parameters (maximum exponent α0, spectrum width Δ α, and asymmetry Δ αas) are introduced. The results show that the fractality of daily API for each year is multifractal. The multifractal sources originate from both a broad probability density function and different long-range correlations with small and large fluctuations. The strength of the distribution multifractality is stronger than that of the correlation multifractality. The variation in the structure of API time series with increasing years is mainly related to long-range correlations. The structure of API time series in some years is richer. These findings can provide a scientific basis for further probing into the complexity of API.

  4. Cytosine modifications in the honey bee (Apis mellifera worker genome

    Directory of Open Access Journals (Sweden)

    Erik Magne Koscielniak Rasmussen

    2015-02-01

    Full Text Available Epigenetic changes enable genomes to respond to changes in the environment, such as altered nutrition, activity, or social setting. Epigenetic modifications, thereby, provides a source of phenotypic plasticity in many species. The honey bee (Apis mellifera uses nutritionally sensitive epigenetic control mechanisms in the development of the royal caste (queens and the workers. The workers are functionally sterile females that can take on a range of distinct physiological and/or behavioral phenotypes in response to environmental changes. Honey bees have a wide repertoire of epigenetic mechanisms which, as in mammals, includes cytosine methylation, hydroxymethylated cytosines, together with the enzymatic machinery responsible for these cytosine modifications. Current data suggests that honey bees provide an excellent system for studying the social repertoire of the epigenome. In this review, we elucidate what is known so far about the honey bee epigenome and its mechanisms. Our discussion includes what may distinguish honey bees from other model animals, how the epigenome can influence worker behavioral task separation, and how future studies can answer central questions about the role of the epigenome in social behavior.

  5. Web API for biology with a workflow navigation system.

    Science.gov (United States)

    Kwon, Yeondae; Shigemoto, Yasumasa; Kuwana, Yoshikazu; Sugawara, Hideaki

    2009-07-01

    DNA Data Bank of Japan (DDBJ) provides Web-based systems for biological analysis, called Web APIs for biology (WABI). So far, we have developed over 20 SOAP services and several workflows that consist of a series of method invocations. In this article, we present newly developed services of WABI, that is, REST-based Web services, additional workflows and a workflow navigation system. Each Web service and workflow can be used as a complete service or a building block for programmers to construct more complex information processing systems. The workflow navigation system aims to help non-programming biologists perform analysis tasks by providing next applicable services on Web browsers according to the output of a previously selected service. With this function, users can apply multiple services consecutively only by following links without any programming or manual copy-and-paste operations on Web browsers. The listed services are determined automatically by the system referring to the dictionaries of service categories, the input/output types of services and HTML tags. WABI and the workflow navigation system are freely accessible at http://www.xml.nig.ac.jp/index.html and http://cyclamen.ddbj.nig.ac.jp/, respectively.

  6. The Influence of Niobium on SSC Resistance in API Steels

    Energy Technology Data Exchange (ETDEWEB)

    Malina, J.; Malina, M.; Novosel-Radovic, V. [Zagreb Univ., Faculty of Metallurgy (Croatia)

    2004-07-01

    Full text of publication follows: Oil country tubular goods are often exposed to aggressive sour environments in oil wells where H{sub 2}S promotes sulfide stress cracking, SSC. This is one of the most dangerous corrosion phenomena characterized by unpredictable and sudden cracking of steel constructions in service. SSC results in a variety of fracture features having a common relationship to the presence of hydrogen in metal and therefore it belongs to hydrogen embrittlement phenomena, HE. For the production of sulfide stress cracking resistant (SSC) tubing from steels included in Group 3 of API Specification 5CT, in this study two experimental Cr-Mo steels (without niobium and with niobium microalloyed) were tested. The influence of Nb precipitates in pipeline steels on the sensitivity to sulfide stress cracking was examined in laboratory experiments using three point bent beam tests. High mechanical properties were achieved through quenching and tempering procedures. Better corrosion resistance of Nb-containing steel is the consequence of microstructural parameters obtained through strengthening mechanism with microalloying element. Besides the usual mechanical, metallographic, SEM and TEM analyses, as complementary method the X-ray diffraction was used. It was revealed that tetragonality of crystal lattice, dislocation density and residual stresses are in good correlation with Sc-vales from corrosion tests. Nb precipitates (especially niobium carbides) have beneficial influence when producing the steels with low sensitivity to SSC. (authors)

  7. SIP APIs for Voice and Video Communications on the Web

    CERN Document Server

    Davids, Carol; Singh, Kundan; Sinnreich, Henry; Wimmreuter, Wilhelm

    2011-01-01

    Existing standard protocols for the web and Internet telephony fail to deliver real-time interactive communication from within a web browser. In particular, the client-server web protocol over reliable TCP is not always suitable for end-to-end low latency media path needed for interactive voice and video communication. To solve this, we compare the available platform options using the existing technologies such as modifying the web programming language and protocol, using an existing web browser plugin, and a separate host resident application that the web browser can talk to. We argue that using a separate application as an adaptor is a promising short term as well as long-term strategy for voice and video communications on the web. Our project aims at developing the open technology and sample implementations for web-based real-time voice and video communication applications. We describe the architecture of our project including (1) a RESTful web communication API over HTTP inspired by SIP message flows, (2)...

  8. Nosema Tolerant Honeybees (Apis mellifera) Escape Parasitic Manipulation of Apoptosis

    Science.gov (United States)

    Kurze, Christoph; Le Conte, Yves; Dussaubat, Claudia; Erler, Silvio; Kryger, Per; Lewkowski, Oleg; Müller, Thomas; Widder, Miriam; Moritz, Robin F. A.

    2015-01-01

    Apoptosis is not only pivotal for development, but also for pathogen defence in multicellular organisms. Although numerous intracellular pathogens are known to interfere with the host’s apoptotic machinery to overcome this defence, its importance for host-parasite coevolution has been neglected. We conducted three inoculation experiments to investigate in the apoptotic respond during infection with the intracellular gut pathogen Nosema ceranae, which is considered as potential global threat to the honeybee (Apis mellifera) and other bee pollinators, in sensitive and tolerant honeybees. To explore apoptotic processes in the gut epithelium, we visualised apoptotic cells using TUNEL assays and measured the relative expression levels of subset of candidate genes involved in the apoptotic machinery using qPCR. Our results suggest that N. ceranae reduces apoptosis in sensitive honeybees by enhancing inhibitor of apoptosis protein-(iap)-2 gene transcription. Interestingly, this seems not be the case in Nosema tolerant honeybees. We propose that these tolerant honeybees are able to escape the manipulation of apoptosis by N. ceranae, which may have evolved a mechanism to regulate an anti-apoptotic gene as key adaptation for improved host invasion. PMID:26445372

  9. Nosema Tolerant Honeybees (Apis mellifera Escape Parasitic Manipulation of Apoptosis.

    Directory of Open Access Journals (Sweden)

    Christoph Kurze

    Full Text Available Apoptosis is not only pivotal for development, but also for pathogen defence in multicellular organisms. Although numerous intracellular pathogens are known to interfere with the host's apoptotic machinery to overcome this defence, its importance for host-parasite coevolution has been neglected. We conducted three inoculation experiments to investigate in the apoptotic respond during infection with the intracellular gut pathogen Nosema ceranae, which is considered as potential global threat to the honeybee (Apis mellifera and other bee pollinators, in sensitive and tolerant honeybees. To explore apoptotic processes in the gut epithelium, we visualised apoptotic cells using TUNEL assays and measured the relative expression levels of subset of candidate genes involved in the apoptotic machinery using qPCR. Our results suggest that N. ceranae reduces apoptosis in sensitive honeybees by enhancing inhibitor of apoptosis protein-(iap-2 gene transcription. Interestingly, this seems not be the case in Nosema tolerant honeybees. We propose that these tolerant honeybees are able to escape the manipulation of apoptosis by N. ceranae, which may have evolved a mechanism to regulate an anti-apoptotic gene as key adaptation for improved host invasion.

  10. 'Special agents' trigger social waves in giant honeybees (Apis dorsata).

    Science.gov (United States)

    Schmelzer, Evelyn; Kastberger, Gerald

    2009-12-01

    Giant honeybees (Apis dorsata) nest in the open and have therefore evolved a variety of defence strategies. Against predatory wasps, they produce highly coordinated Mexican wavelike cascades termed 'shimmering', whereby hundreds of bees flip their abdomens upwards. Although it is well known that shimmering commences at distinct spots on the nest surface, it is still unclear how shimmering is generated. In this study, colonies were exposed to living tethered wasps that were moved in front of the experimental nest. Temporal and spatial patterns of shimmering were investigated in and after the presence of the wasp. The numbers and locations of bees that participated in the shimmering were assessed, and those bees that triggered the waves were identified. The findings reveal that the position of identified trigger cohorts did not reflect the experimental path of the tethered wasp. Instead, the trigger centres were primarily arranged in the close periphery of the mouth zone of the nest, around those parts where the main locomotory activity occurs. This favours the 'special-agents' hypothesis that suggest that groups of specialized bees initiate the shimmering.

  11. blend4php: a PHP API for galaxy.

    Science.gov (United States)

    Wytko, Connor; Soto, Brian; Ficklin, Stephen P

    2017-01-01

    Galaxy is a popular framework for execution of complex analytical pipelines typically for large data sets, and is a commonly used for (but not limited to) genomic, genetic and related biological analysis. It provides a web front-end and integrates with high performance computing resources. Here we report the development of the blend4php library that wraps Galaxy's RESTful API into a PHP-based library. PHP-based web applications can use blend4php to automate execution, monitoring and management of a remote Galaxy server, including its users, workflows, jobs and more. The blend4php library was specifically developed for the integration of Galaxy with Tripal, the open-source toolkit for the creation of online genomic and genetic web sites. However, it was designed as an independent library for use by any application, and is freely available under version 3 of the GNU Lesser General Public License (LPGL v3.0) at https://github.com/galaxyproject/blend4phpDatabase URL: https://github.com/galaxyproject/blend4php. © The Author(s) 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  12. Energetic feedings influence beeswax production by Apis mellifera L. honeybees

    Directory of Open Access Journals (Sweden)

    Marcela Pedraza Carrillo

    2015-02-01

    Full Text Available The effect of different types of energy feeding (sugar syrup, inverted sugar and juice of sugar-cane on beeswax production and its economic feasibility are evaluated. Twenty beehives of Africanized Apis mellifera were selected, and five were used for each type of feeding. The treatments were T1 (sugar-cane juice, T2 (sugar syrup and T3 (inverted sugar. Feedings was provided by Boardman feeders and the amount was adjusted according to consumption. A layer of beeswax was manually set up into the honeybee nest and beeswax built area was measured weekly. Total reducing sugar, calorimetry, dry matter and ashes of all feedings were analyzed. Data were analyzed by analysis of variance with Tukey’s test to determine differences among averages. The average consumption of inverted sugar was significantly lower than that of other treatments. The highest beeswax production average occurred in the sugar syrup treatment. The highest average of ashes, dry matter and reducing sugar occurred, respectively, in sugar-cane juice, inverted sugar and sugar syrup. Sugar syrup may be an alternative energy source for beeswax production, although sugar-cane juice may be more profitable.

  13. Mating flights select for symmetry in honeybee drones (Apis mellifera).

    Science.gov (United States)

    Jaffé, Rodolfo; Moritz, Robin F A

    2010-03-01

    Males of the honeybee (Apis mellifera) fly to specific drone congregation areas (DCAs), which virgin queens visit in order to mate. From the thousands of drones that are reared in a single colony, only very few succeed in copulating with a queen, and therefore, a strong selection is expected to act on adult drones during their mating flights. In consequence, the gathering of drones at DCAs may serve as an indirect mate selection mechanism, assuring that queens only mate with those individuals having a better flight ability and a higher responsiveness to the queen's visual and chemical cues. Here, we tested this idea relying on wing fluctuating asymmetry (FA) as a measure of phenotypic quality. By recapturing marked drones at a natural DCA and comparing their size and FA with a control sample of drones collected at their maternal hives, we were able to detect any selection on wing size and wing FA occurring during the mating flights. Although we found no solid evidence for selection on wing size, wing FA was found to be significantly lower in the drones collected at the DCA than in those collected at the hives. Our results demonstrate the action of selection during drone mating flights for the first time, showing that developmental stability can influence the mating ability of honeybee drones. We therefore conclude that selection during honeybee drone mating flights may confer some fitness advantages to the queens.

  14. When API Mass Spectrometry Meets Super Atmospheric Pressure Ion Sources.

    Science.gov (United States)

    Chen, Lee Chuin

    2015-01-01

    In a tutorial paper on the application of free-jet technique for API-MS, John Fenn mentioned that "…for a number of years and a number of reasons, it has been found advantageous in many situations to carry out the ionization process in gas at pressures up to 1000 Torr or more" (Int. J. Mass Spectrom. 200: 459-478, 2000). In fact, the first ESI mass spectrometer constructed by Yamashita and Fenn had a counter-flow curtain gas source at 1050 Torr (ca. 1.4 atm) to sweep away the neutral (J. Phys. Chem. 88: 4451-4459, 1984). For gaseous ionization using electrospray plume, theoretical analysis also shows that "super-atmospheric operation would be more preferable in space-charge-limited situations."(Int. J. Mass Spectrom. 300: 182-193, 2011). However, electrospray and the corona-based chemical ion source (APCI) in most commercial instrument are basically operated under an atmospheric pressure ambient, perhaps out of the concern of safety, convenience and simplicity in maintenance. Running the ion source at pressure much higher than 1 atm is not so common, but had been done by a number of groups as well as in our laboratory. A brief review on these ion sources will be given in this paper.

  15. Activity of telomerase and telomeric length in Apis mellifera.

    Science.gov (United States)

    Korandová, Michala; Frydrychová, Radmila Čapková

    2016-06-01

    Telomerase is an enzyme that adds repeats of DNA sequences to the ends of chromosomes, thereby preventing their shortening. Telomerase activity is associated with proliferative status of cells, organismal development, and aging. We report an analysis of telomerase activity and telomere length in the honeybee, Apis mellifera. Telomerase activity was found to be regulated in a development and caste-specific manner. During the development of somatic tissues of larval drones and workers, telomerase activity declined to 10 % of its level in embryos and remained low during pupal and adult stages but was upregulated in testes of late pupae, where it reached 70 % of the embryo level. Upregulation of telomerase activity was observed in the ovaries of late pupal queens, reaching 160 % of the level in embryos. Compared to workers and drones, queens displayed higher levels of telomerase activity. In the third larval instar of queens, telomerase activity reached the embryo level, and an enormous increase was observed in adult brains of queens, showing a 70-fold increase compared to a brain of an adult worker. Southern hybridization of terminal TTAGG fragments revealed a high variability of telomeric length between different individuals, although the same pattern of hybridization signals was observed in different tissues of each individual.

  16. Mating flights select for symmetry in honeybee drones ( Apis mellifera)

    Science.gov (United States)

    Jaffé, Rodolfo; Moritz, Robin F. A.

    2010-03-01

    Males of the honeybee ( Apis mellifera) fly to specific drone congregation areas (DCAs), which virgin queens visit in order to mate. From the thousands of drones that are reared in a single colony, only very few succeed in copulating with a queen, and therefore, a strong selection is expected to act on adult drones during their mating flights. In consequence, the gathering of drones at DCAs may serve as an indirect mate selection mechanism, assuring that queens only mate with those individuals having a better flight ability and a higher responsiveness to the queen’s visual and chemical cues. Here, we tested this idea relying on wing fluctuating asymmetry (FA) as a measure of phenotypic quality. By recapturing marked drones at a natural DCA and comparing their size and FA with a control sample of drones collected at their maternal hives, we were able to detect any selection on wing size and wing FA occurring during the mating flights. Although we found no solid evidence for selection on wing size, wing FA was found to be significantly lower in the drones collected at the DCA than in those collected at the hives. Our results demonstrate the action of selection during drone mating flights for the first time, showing that developmental stability can influence the mating ability of honeybee drones. We therefore conclude that selection during honeybee drone mating flights may confer some fitness advantages to the queens.

  17. Comparative sucrose responsiveness in Apis mellifera and A. cerana foragers.

    Science.gov (United States)

    Yang, Wenchao; Kuang, Haiou; Wang, Shanshan; Wang, Jie; Liu, Wei; Wu, Zhenhong; Tian, Yuanyuan; Huang, Zachary Y; Miao, Xiaoqing

    2013-01-01

    In the European honey bee, Apis mellifera, pollen foragers have a higher sucrose responsiveness than nectar foragers when tested using a proboscis extension response (PER) assay. In addition, Africanized honey bees have a higher sucrose responsiveness than European honey bees. Based on the biology of the Eastern honey bee, A. cerana, we hypothesized that A. cerana should also have a higher responsiveness to sucrose than A. mellifera. To test this hypothesis, we compared the sucrose thresholds of pollen foragers and nectar foragers in both A. cerana and A. mellifera in Fujian Province, China. Pollen foragers were more responsive to sucrose than nectar foragers in both species, consistent with previous studies. However, contrary to our hypothesis, A. mellifera was more responsive than A. cerana. We also demonstrated that this higher sucrose responsiveness in A. mellifera was not due to differences in the colony environment by co-fostering two species of bees in the same mixed-species colonies. Because A. mellifera foragers were more responsive to sucrose, we predicted that their nectar foragers should bring in less concentrated nectar compared to that of A. cerana. However, we found no differences between the two species. We conclude that A. cerana shows a different pattern in sucrose responsiveness from that of Africanized bees. There may be other mechanisms that enable A. cerana to perform well in areas with sparse nectar resources.

  18. blend4php: a PHP API for galaxy

    Science.gov (United States)

    Wytko, Connor; Soto, Brian; Ficklin, Stephen P.

    2017-01-01

    Galaxy is a popular framework for execution of complex analytical pipelines typically for large data sets, and is a commonly used for (but not limited to) genomic, genetic and related biological analysis. It provides a web front-end and integrates with high performance computing resources. Here we report the development of the blend4php library that wraps Galaxy’s RESTful API into a PHP-based library. PHP-based web applications can use blend4php to automate execution, monitoring and management of a remote Galaxy server, including its users, workflows, jobs and more. The blend4php library was specifically developed for the integration of Galaxy with Tripal, the open-source toolkit for the creation of online genomic and genetic web sites. However, it was designed as an independent library for use by any application, and is freely available under version 3 of the GNU Lesser General Public License (LPGL v3.0) at https://github.com/galaxyproject/blend4php. Database URL: https://github.com/galaxyproject/blend4php PMID:28077564

  19. Influencia de la cantidad de O2 adicionado al CO2 en el gas de protección sobre la microestructura del metal depositado en uniones soldadas de bordes rectos en aceros de bajo contenido de carbono con el proceso GMAW Influence of O2 content, added to CO2 in the shielding gas, on the microstructure of deposited metal in butt welded joint with straight edges, in low carbon steels using GMAW process

    Directory of Open Access Journals (Sweden)

    Eduardo Díaz-Cedré

    2010-12-01

    Full Text Available La presencia de ferrita acicular (FA en la microestructura del cordón de soldadura, dentro de determinado rango de valores, eleva considerablemente la tenacidad de las uniones soldadas. Es por ello, que el presente trabajo trata sobre un estudio que relaciona la cantidad de ferrita acicular en el cordón en función del contenido de oxígeno presente en la mezcla activa CO2+O2, durante la realización de uniones soldadas de bordes rectos en aceros de bajo carbono con el proceso con electrodo fusible y protección gaseosa (GMAW en condiciones invariables de parámetros de proceso (corriente de soldadura, voltaje de arco, velocidad de soldadura, longitud libre y flujo de gas protector. Como resultado del trabajo se estableció la relación gráfica existente entre la ferrita acicular y el contenido de oxígeno en la mezcla.The presence of acicular ferrite (AF in the microstructure of weld bead, in a specified range of values, increase considerably the toughness of welded joints. The present paper, for that reason, study the relationship between the acicular ferrite quantity in the deposited metal and the oxygen present in the active gas mixture of CO2+O2, during the execution of butt welded joints with straight edges, in low carbon steels with consumable electrode and gas protection (GMAW in invariable conditions of process parameters (welding current, arc voltage, welding speed, electrode extension, and gas flow. The graphic relation between the acicular ferrite and the oxygen content was established, as result of the research work.

  20. Western honeybee drones and workers (Apis mellifera ligustica) have different olfactory mechanisms than eastern honeybees (Apis cerana cerana).

    Science.gov (United States)

    Woltedji, Dereje; Song, Feifei; Zhang, Lan; Gala, Alemayehu; Han, Bin; Feng, Mao; Fang, Yu; Li, Jianke

    2012-09-07

    The honeybees Apis mellifera ligustica (Aml) and Apis cerana cerana (Acc) are two different western and eastern bee species that evolved in distinct ecologies and developed specific antennal olfactory systems for their survival. Knowledge of how their antennal olfactory systems function in regards to the success of each respective bee species is scarce. We compared the antennal morphology and proteome between respective sexually mature drones and foraging workers of both species using a scanning electron microscope, two-dimensional electrophoresis, mass spectrometry, bioinformatics, and quantitative real-time polymerase chain reaction. Despite the general similarities in antennal morphology of the drone and worker bees between the two species, a total of 106 and 100 proteins altered their expression in the drones' and the workers' antennae, respectively. This suggests that the differences in the olfactory function of each respective bee are supported by the change of their proteome. Of the 106 proteins that altered their expression in the drones, 72 (68%) and 34 (32%) were overexpressed in the drones of Aml and Acc, respectively. The antennae of the Aml drones were built up by the highly expressed proteins that were involved in carbohydrate metabolism and energy production, molecular transporters, antioxidation, and fatty acid metabolism in contrast to the Acc drones. This is believed to enhance the antennal olfactory functions of the Aml drones as compared to the Acc drones during their mating flight. Likewise, of the 100 proteins with expression changes between the worker bees of the two species, 67% were expressed in higher levels in the antennae of Aml worker contrasting to 33% in the Acc worker. The overall higher expressions of proteins related to carbohydrate metabolism and energy production, molecular transporters, and antioxidation in the Aml workers compared with the Acc workers indicate the Aml workers require more antennal proteins for their olfactory

  1. SjAPI, the first functionally characterized Ascaris-type protease inhibitor from animal venoms.

    Directory of Open Access Journals (Sweden)

    Zongyun Chen

    Full Text Available BACKGROUND: Serine protease inhibitors act as modulators of serine proteases, playing important roles in protecting animal toxin peptides from degradation. However, all known serine protease inhibitors discovered thus far from animal venom belong to the Kunitz-type subfamily, and whether there are other novel types of protease inhibitors in animal venom remains unclear. PRINCIPAL FINDINGS: Here, by screening scorpion venom gland cDNA libraries, we identified the first Ascaris-type animal toxin family, which contains four members: Scorpiops jendeki Ascaris-type protease inhibitor (SjAPI, Scorpiops jendeki Ascaris-type protease inhibitor 2 (SjAPI-2, Chaerilus tricostatus Ascaris-type protease inhibitor (CtAPI, and Buthus martensii Ascaris-type protease inhibitor (BmAPI. The detailed characterization of Ascaris-type peptide SjAPI from the venom gland of scorpion Scorpiops jendeki was carried out. The mature peptide of SjAPI contains 64 residues and possesses a classical Ascaris-type cysteine framework reticulated by five disulfide bridges, different from all known protease inhibitors from venomous animals. Enzyme and inhibitor reaction kinetics experiments showed that recombinant SjAPI was a dual function peptide with α-chymotrypsin- and elastase-inhibiting properties. Recombinant SjAPI inhibited α-chymotrypsin with a Ki of 97.1 nM and elastase with a Ki of 3.7 μM, respectively. Bioinformatics analyses and chimera experiments indicated that SjAPI contained the unique short side chain functional residues "AAV" and might be a useful template to produce new serine protease inhibitors. CONCLUSIONS/SIGNIFICANCE: To our knowledge, SjAPI is the first functionally characterized animal toxin peptide with an Ascaris-type fold. The structural and functional diversity of animal toxins with protease-inhibiting properties suggested that bioactive peptides from animal venom glands might be a new source of protease inhibitors, which will accelerate the

  2. The construction of prokaryotic expression system for human Api6 fusion protein%人Api6融合蛋白原核表达系统的构建

    Institute of Scientific and Technical Information of China (English)

    方严; 练雪梅

    2011-01-01

    Objective:To further study the pathophysiological function of human Api6 fusion protein expression using a prokaryotic expression system. Methods: Api6 cDNA was inserted into ppSUMO vector to form recombinant plasmid pp-SUMO-Api6;recombinant plasmid ppSUMO-Api6 was trans-formed into prokaryotic expression host E.coli Rosetta;prokaryotic expression method was optimized to induce expression of recombi-nant protein Api6 in different conditions of E.coli density,temperature,IPTG concentration and induction time;recombinant protein Api6 was identified by Western blot. Results:The recombinant plasmid ppSUMO-Api6 was successfully constructed;the recombinant protein Api6 was successfully induced,and the expression of recombinant protein ppSUMO-Api6 from the prokaryotic expression system was optimized in the condition of OD600=0.5-0.8,16℃,0.5 mmol/L IPTG and 16 h induction.Conclusion:Recombinant plasmid ppSUMO-Api6 was converted into the prokaryotic expression host E.coli Rosetta to get the recombinant strain ppSUMO-Api6-Rosetta.Recombinant protein ppSUMO-Api6 was expressed using a prokaryotic expression system at the optimal expression conditions.%目的:本研究拟采用蛋白原核表达的方法,诱导表达人Api6(Apoptosis inhibitor 6)融合蛋白,为进一步研究Api6在凋亡抑制、脂质代谢和肿瘤发生中的作用奠定基础.方法:利用PCR技术扩增人Api6基因,将其克隆至原核表达载体ppSUMO,构建重组质粒ppSUMO-Api6;重组质粒转化原核表达宿主菌E.coli Rosetta感受态;采用蛋白原核表达的方法,不同诱导前菌液浓度,不同温度、不同异丙基硫化半乳糖苷(Isopropy 1-β-D-thiogalaotopyrano-side,IPTG)浓度、不同诱导时间,筛选诱导表达Api6重组蛋白的最优条件;Western blot鉴定其表达情况.结果:成功构建重组质粒ppSUMO-Api6;成功诱导Api6重组蛋白的原核表达,表达的最优条件为:OD600=0.5~0.8的重组菌,16℃、0.5 mmol/L IPTG诱导16 h.结论:含有人Api6 c

  3. Comparison of API 20E and invA PCR for identification of Salmonella enterica isolates from swine production units.

    Science.gov (United States)

    Nucera, Daniele M; Maddox, Carol W; Hoien-Dalen, Patricia; Weigel, Ronald M

    2006-09-01

    API 20E and invA PCR were evaluated for the identification of Salmonella enterica isolates from swine farms. API 20E had the highest agreement with other tests at the 99.9% likelihood level. Both tests had 100% sensitivity and 96% specificity compared to 16S rRNA sequencing. Compared to serotyping, both tests had 96% sensitivity; specificity was 86% for API 20E and 79% for invA PCR.

  4. Mutational epitope analysis and cross-reactivity of two isoforms of Api g 1, the major celery allergen.

    Science.gov (United States)

    Wangorsch, Andrea; Ballmer-Weber, Barbara K; Rösch, Paul; Holzhauser, Thomas; Vieths, Stefan

    2007-04-01

    For better understanding the cross-reactivity between the major birch pollen and celery allergens, Bet v 1 and Api g 1, respectively, putative epitope areas and structurally important positions for IgE-binding of the isoforms Api g 1.01 and Api g 1.02 were point mutated. The IgE binding capacities were measured in ELISA, the IgE cross-reactivity between the isoforms, mutants and Bet v 1 investigated by ELISA-inhibition experiments with serum pools from patients with confirmed celery allergy (DBPCFC). Api g 1.01 displayed a clearly higher frequency and capacity of IgE binding than Api g 1.02. In Api g 1.01, substitution of lysine against glutamic acid at amino acid position 44, a key residue of the Bet v 1 "P-loop", increased the IgE-binding properties. Structural instability due to proline insertion at position 111/112 resulted in loss of IgE binding of Api g 1.01, but not of Api g 1.02. Between Api g 1.01 and Api g 1.02 only partial cross-reactivity was seen. The data suggest that the IgE epitopes of the two isoforms are distinct and that in contrast to Api g 1.01, the "P-loop" region plays an important role for IgE binding of celery allergic subjects to Api g 1.02. Understanding and investigation of the molecular mechanisms in celery allergy is an important step to generate hypoallergenic proteins for safe and efficacious immunotherapy of food allergy.

  5. Software Defined GPS API: Development and Implementation of GPS Correlator Architectures Using MATLAB with Focus on SDR Implementations

    Science.gov (United States)

    2014-05-18

    NO. 0704-0188 3. DATES COVERED (From - To) - UU UU UU UU Approved for public release; distribution is unlimited. Software Defined GPS API : Development...and Implementation of GPS Correlator Architectures Using MATLAB with Focus on SDR Implementations The Software Defined GPS API was created with the...ABOVE ADDRESS. Polytechnic University of Puerto Rico 377 Ponce de Leon Ave. Hato Rey, PR 00918 -0000 ABSTRACT Software Defined GPS API : Development and

  6. Windows API funkcijų sekų perėmimo bibliotekų tyrimas Windows API Hooking Libraries Research

    Directory of Open Access Journals (Sweden)

    Lukas Radvilavičius

    2011-08-01

    Full Text Available

    Nagrinėjamos bibliotekos, skirtos Windows API funkcijų sekų perėmimui. Sekų perėmimas gali būti panaudojamas įvairiose srityse: siekiant išsiaiškinti operacinės sistemos veikimo principus, norint atlikti programos derinimą arba pridėti papildomą funkcionalumą prie jau esamo. Straipsnyje apžvelgiamos Windows API ir pateikiamos trečiųjų šalių priemonės funkcijų sekoms  perimti. Aptariamos jų teikiamos galimybės, panaudojimo specifika. Taip pat atlikti testai, siekiant išsiaiškinti, kuri biblioteka su užduotimis susitvarko greičiausiai. Tyrimui pasirinkti du nemokami gaminiai: Microsoft Detours ir EasyHook bibliotekos.

    Straipsnis lietuvių kalba

    The paper describes methods how to apply Windows API hooking with third party libraries and solutions. In this research were used Windows API function SetWindowsHookEx, Detours and EasyHook libraries. Libraries methods, features and advantages were discussed in this paper. The practical part contains libraries tests. In analysis we tested target program start with hooking library and injected function call.

    Article in Lithuanian

  7. Development of API 5 CT grade P110 steel casing; Desenvolvimento de tubos casing API 5 CT grau P110

    Energy Technology Data Exchange (ETDEWEB)

    Kojima, Sergio Seijo; Roza, Juliana Espinossi

    2003-07-01

    This paper has as objective to discuss the results gotten in experiences carried through in industrial scale for the development of pipes class API 5CT P110 (1), with 244 mm of diameter and 12 mm of thickness. The pipes were welded longitudinally by process ERW (electric resistance welding) and submitted to quenching and tempering heat treatments. A C-Mn-Cr alloy with adequate quenching ability was used for the attainment of a martensite microstructure after quenching. The pipes at a temperature of 880 deg C were quenched in water and subsequently tempered at 515 deg C. The integrity of the weld region was evaluated through non destructive tests and flattening tests, Charpy impact tests and fracture toughness tests (CTOD). The pipes achieved the tension properties stipulated in the standard (yield strength bigger limit of 758 Mpa), and also the energy in the Charpy impact test (transversal), considering that the energy value obtained was 55 J (at 0 deg C) for base metal and 44 J in the weld metal. (author)

  8. [Melissopalynology and trophic niche of Apis cerana ceraca and Apis mellifera ligustica in Yunnan Province of Southwest China].

    Science.gov (United States)

    Liu, Yu-Jia; Zhao, Tian-Rui; Zhao, Feng-Yun

    2013-01-01

    In 2010 and 2011, the honey samples of Apis cerana cerana and A. mellifera ligustica were collected from Kunming and Mengzi of Yunnan Province, respectively, aimed to analyze the melissopalynology and tropic niche of the two bee species. The absolute pollen concentration of the honey of A. cerana cerana was 1.55 x 10(4) ind x g(-1), being significantly higher than that (1.01 x 10(4) ind x g(-1)) of A. mellifera ligustica, and the number of nectar plant species collected by A. cerana cerana was 12.9, also significantly higher than that (7.7) collected by A. mellifera ligustica, indicating that A. cerana cerana could utilize more nectar plants, while A. mellifera ligustica had stronger selectivity to the nectar plants. The trophic niche breadth of A. cerana cerana was 0.35, which was significantly higher than that (0.23) of A. mellifera ligustica. The trophic niche overlap index between the two bee species was 0.71, and the interspecific competition index was 0.93, suggesting that the food competition between A. cerana cerana and A. mellifera ligustica was fierce.

  9. 一种基于新型图模型的 API 推荐系统%APISynth:A New Graph-Based API Recommender System

    Institute of Scientific and Technical Information of China (English)

    吕晨; 姜伟; 虎嵩林

    2015-01-01

    对象实例化是软件工程类库复用中一个常见、复杂的问题.即根据已知源类型的对象,用户需要编写代码对目标类型进行实例化.研究人员提出了若干种 API 自动推荐系统辅助用户解决上述问题.然而这些系统不能同时兼顾准确率和查全率,因此在一定程度上影响了系统的实用性.该文提出了一种兼顾准确率和查全率,基于新型图模型的 API 推荐系统———APISynth.在查全率方面,APISynth 使用一个新颖的全局图模型来表达类库中所有的API 依赖关系和 API 历史使用信息.利用新的全局图模型具有的特殊 Tag 元素和可达性质以避免错误的 API 调用.在准确率方面,APISynth 首先将对象实例化问题建模为 Top-K 子图查询问题,然后设计一种新的支持 DAG 形式解的图搜索算法,避免了传统的最短路径图搜索算法导致的查不准问题.实验结果表明,与现有多种方法相比, APISynth 在准确率和查全率两方面均获得了较大提升.%How to perform object instantiation is a common and complex problem in reusing an existing library.In this problem,given the object of source type,users need to write code to instantiate the destination type.Recently,researchers have proposed a variety of related API automatic recommender systems to fulfill this problem.These systems can assist users to solve the above issue in some degree.However,it is very difficult for such systems to achieve both good recall and precision,which affects the usability.This paper presents APISynth,a new graph-based API recommender system.In order to improve the recall,APISynth utilizes a new global graph model to give a better representation for the API dependencies in the relevant class library,and to include API historical usage information in.A special tag element is added to the new graph together with a new reach ability property to avoid false invocation of APIs

  10. Social waves in giant honeybees (Apis dorsata) elicit nest vibrations.

    Science.gov (United States)

    Kastberger, Gerald; Weihmann, Frank; Hoetzl, Thomas

    2013-07-01

    Giant honeybees (Apis dorsata) nest in the open and have developed a wide array of strategies for colony defence, including the Mexican wave-like shimmering behaviour. In this collective response, the colony members perform upward flipping of their abdomens in coordinated cascades across the nest surface. The time-space properties of these emergent waves are response patterns which have become of adaptive significance for repelling enemies in the visual domain. We report for the first time that the mechanical impulse patterns provoked by these social waves and measured by laser Doppler vibrometry generate vibrations at the central comb of the nest at the basic (='natural') frequency of 2.156 ± 0.042 Hz which is more than double the average repetition rate of the driving shimmering waves. Analysis of the Fourier spectra of the comb vibrations under quiescence and arousal conditions provoked by mass flight activity and shimmering waves gives rise to the proposal of two possible models for the compound physical system of the bee nest: According to the elastic oscillatory plate model, the comb vibrations deliver supra-threshold cues preferentially to those colony members positioned close to the comb. The mechanical pendulum model predicts that the comb vibrations are sensed by the members of the bee curtain in general, enabling mechanoreceptive signalling across the nest, also through the comb itself. The findings show that weak and stochastic forces, such as general quiescence or diffuse mass flight activity, cause a harmonic frequency spectrum of the comb, driving the comb as an elastic plate. However, shimmering waves provide sufficiently strong forces to move the nest as a mechanical pendulum. This vibratory behaviour may support the colony-intrinsic information hypothesis herein that the mechanical vibrations of the comb provoked by shimmering do have the potential to facilitate immediate communication of the momentary defensive state of the honeybee nest to

  11. Transcriptome analysis of the Asian honey bee Apis cerana cerana.

    Directory of Open Access Journals (Sweden)

    Zi Long Wang

    Full Text Available BACKGROUND: The Eastern hive honey bee, Apis cerana cerana is a native and widely bred honey bee species in China. Molecular biology research about this honey bee species is scarce, and genomic information for A. c. cerana is not currently available. Transcriptome and expression profiling data for this species are therefore important resources needed to better understand the biological mechanisms of A. c. cerana. In this study, we obtained the transcriptome information of A. c. cerana by RNA-sequencing and compared gene expression differences between queens and workers of A. c. cerana by digital gene expression (DGE analysis. RESULTS: Using high-throughput Illumina RNA sequencing we obtained 51,581,510 clean reads corresponding to 4.64 Gb total nucleotides from a single run. These reads were assembled into 46,999 unigenes with a mean length of 676 bp. Based on a sequence similarity search against the five public databases (NR, Swissport, GO, COG, KEGG with a cut-off E-value of 10(-5 using BLASTX, a total of 24,630 unigenes were annotated with gene descriptions, gene ontology terms, or metabolic pathways. Using these transcriptome data as references we analyzed the gene expression differences between the queens and workers of A. c. cerana using a tag-based digital gene expression method. We obtained 5.96 and 5.66 million clean tags from the queen and worker samples, respectively. A total of 414 genes were differentially expressed between them, with 189 up-regulated and 225 down-regulated in queens. CONCLUSIONS: Our transcriptome data provide a comprehensive sequence resource for future A. c. cerana study, establishing an important public information platform for functional genomic studies in A. c. cerana. Furthermore, the DGE data provide comprehensive gene expression information for the queens and workers, which will facilitate our understanding of the molecular mechanisms of the different physiological aspects of the two castes.

  12. Acaricide, fungicide and drug interactions in honey bees (Apis mellifera.

    Directory of Open Access Journals (Sweden)

    Reed M Johnson

    Full Text Available BACKGROUND: Chemical analysis shows that honey bees (Apis mellifera and hive products contain many pesticides derived from various sources. The most abundant pesticides are acaricides applied by beekeepers to control Varroa destructor. Beekeepers also apply antimicrobial drugs to control bacterial and microsporidial diseases. Fungicides may enter the hive when applied to nearby flowering crops. Acaricides, antimicrobial drugs and fungicides are not highly toxic to bees alone, but in combination there is potential for heightened toxicity due to interactive effects. METHODOLOGY/PRINCIPAL FINDINGS: Laboratory bioassays based on mortality rates in adult worker bees demonstrated interactive effects among acaricides, as well as between acaricides and antimicrobial drugs and between acaricides and fungicides. Toxicity of the acaricide tau-fluvalinate increased in combination with other acaricides and most other compounds tested (15 of 17 while amitraz toxicity was mostly unchanged (1 of 15. The sterol biosynthesis inhibiting (SBI fungicide prochloraz elevated the toxicity of the acaricides tau-fluvalinate, coumaphos and fenpyroximate, likely through inhibition of detoxicative cytochrome P450 monooxygenase activity. Four other SBI fungicides increased the toxicity of tau-fluvalinate in a dose-dependent manner, although possible evidence of P450 induction was observed at the lowest fungicide doses. Non-transitive interactions between some acaricides were observed. Sublethal amitraz pre-treatment increased the toxicity of the three P450-detoxified acaricides, but amitraz toxicity was not changed by sublethal treatment with the same three acaricides. A two-fold change in the toxicity of tau-fluvalinate was observed between years, suggesting a possible change in the genetic composition of the bees tested. CONCLUSIONS/SIGNIFICANCE: Interactions with acaricides in honey bees are similar to drug interactions in other animals in that P450-mediated detoxication

  13. Detection of Illicit Drugs by Trained Honeybees (Apis mellifera.

    Directory of Open Access Journals (Sweden)

    Matthias Schott

    Full Text Available Illegal drugs exacerbate global social challenges such as substance addiction, mental health issues and violent crime. Police and customs officials often rely on specially-trained sniffer dogs, which act as sensitive biological detectors to find concealed illegal drugs. However, the dog "alert" is no longer sufficient evidence to allow a search without a warrant or additional probable cause because cannabis has been legalized in two US states and is decriminalized in many others. Retraining dogs to recognize a narrower spectrum of drugs is difficult and training new dogs is time consuming, yet there are no analytical devices with the portability and sensitivity necessary to detect substance-specific chemical signatures. This means there is currently no substitute for sniffer dogs. Here we describe an insect screening procedure showing that the western honeybee (Apis mellifera can sense volatiles associated with pure samples of heroin and cocaine. We developed a portable electroantennographic device for the on-site measurement of volatile perception by these insects, and found a positive correlation between honeybee antennal responses and the concentration of specific drugs in test samples. Furthermore, we tested the ability of honeybees to learn the scent of heroin and trained them to show a reliable behavioral response in the presence of a highly-diluted scent of pure heroin. Trained honeybees could therefore be used to complement or replace the role of sniffer dogs as part of an automated drug detection system. Insects are highly sensitive to volatile compounds and provide an untapped resource for the development of biosensors. Automated conditioning as presented in this study could be developed as a platform for the practical detection of illicit drugs using insect-based sensors.

  14. Acaricide, fungicide and drug interactions in honey bees (Apis mellifera).

    Science.gov (United States)

    Johnson, Reed M; Dahlgren, Lizette; Siegfried, Blair D; Ellis, Marion D

    2013-01-01

    Chemical analysis shows that honey bees (Apis mellifera) and hive products contain many pesticides derived from various sources. The most abundant pesticides are acaricides applied by beekeepers to control Varroa destructor. Beekeepers also apply antimicrobial drugs to control bacterial and microsporidial diseases. Fungicides may enter the hive when applied to nearby flowering crops. Acaricides, antimicrobial drugs and fungicides are not highly toxic to bees alone, but in combination there is potential for heightened toxicity due to interactive effects. Laboratory bioassays based on mortality rates in adult worker bees demonstrated interactive effects among acaricides, as well as between acaricides and antimicrobial drugs and between acaricides and fungicides. Toxicity of the acaricide tau-fluvalinate increased in combination with other acaricides and most other compounds tested (15 of 17) while amitraz toxicity was mostly unchanged (1 of 15). The sterol biosynthesis inhibiting (SBI) fungicide prochloraz elevated the toxicity of the acaricides tau-fluvalinate, coumaphos and fenpyroximate, likely through inhibition of detoxicative cytochrome P450 monooxygenase activity. Four other SBI fungicides increased the toxicity of tau-fluvalinate in a dose-dependent manner, although possible evidence of P450 induction was observed at the lowest fungicide doses. Non-transitive interactions between some acaricides were observed. Sublethal amitraz pre-treatment increased the toxicity of the three P450-detoxified acaricides, but amitraz toxicity was not changed by sublethal treatment with the same three acaricides. A two-fold change in the toxicity of tau-fluvalinate was observed between years, suggesting a possible change in the genetic composition of the bees tested. Interactions with acaricides in honey bees are similar to drug interactions in other animals in that P450-mediated detoxication appears to play an important role. Evidence of non-transivity, year-to-year variation

  15. Antibacterial Activity of a Cardanol from Thai Apis mellifera Propolis

    Science.gov (United States)

    Boonsai, Pattaraporn; Phuwapraisirisan, Preecha; Chanchao, Chanpen

    2014-01-01

    Background: Propolis is a sticky, dark brown resinous residue made by bees that is derived from plant resins. It is used to construct and repair the nest, and in addition possesses several diverse bioactivities. Here, propolis from Apis mellifera from Nan province, Thailand, was tested for antibacterial activity against Gram+ve (Staphylococcus aureus and Paenibacillus larvae) and Gram-ve (Escherichia coli) bacteria. Materials and methods: The three bacterial isolates were confirmed for species designation by Gram staining and analysis of the partial sequence of 16S rDNA. Propolis was sequentially extracted by methanol, dichloromethane and hexane. The antibacterial activity was determined by agar well diffusion and microbroth dilution assays using streptomycin as a positive control. The most active crude extract was further purified by quick column and adsorption chromatography. The apparent purity of each bioactive fraction was tested by thin layer chromatography. The chemical structure of the isolated bioactive compound was analyzed by nuclear magnetic resonance (NMR). Results: Crude methanol extract of propolis showed the best antibacterial activity with a minimum inhibition concentration (MIC) value of 5 mg/mL for S. aureus and E. coli and 6.25 mg/mL for P. larvae. After quick column chromatography, only three active fractions were inhibitory to the growth of S. aureus and E. coli with MIC values of 6.25 and 31.3 µg/mL, respectively. Further adsorption chromatography yielded one pure bioactive fraction (A1A) with an IC50 value of 0.175 µg/mL for E. coli and 0.683 µg/mL for P. larvae, and was determined to be cardanol by NMR analysis. Scanning and transmission electron microscopy analysis revealed unusual shaped (especially in dividing cells), damaged and dead cells in cardanol-treated E. coli. Conclusion: Thai propolis contains a promising antibacterial agent. PMID:24578609

  16. Viruses associated with ovarian degeneration in Apis mellifera L. queens.

    Directory of Open Access Journals (Sweden)

    Laurent Gauthier

    Full Text Available Queen fecundity is a critical issue for the health of honeybee (Apis mellifera L. colonies, as she is the only reproductive female in the colony and responsible for the constant renewal of the worker bee population. Any factor affecting the queen's fecundity will stagnate colony development, increasing its susceptibility to opportunistic pathogens. We discovered a pathology affecting the ovaries, characterized by a yellow discoloration concentrated in the apex of the ovaries resulting from degenerative lesions in the follicles. In extreme cases, marked by intense discoloration, the majority of the ovarioles were affected and these cases were universally associated with egg-laying deficiencies in the queens. Microscopic examination of the degenerated follicles showed extensive paracrystal lattices of 30 nm icosahedral viral particles. A cDNA library from degenerated ovaries contained a high frequency of deformed wing virus (DWV and Varroa destructor virus 1 (VDV-1 sequences, two common and closely related honeybee Iflaviruses. These could also be identified by in situ hybridization in various parts of the ovary. A large-scale survey for 10 distinct honeybee viruses showed that DWV and VDV-1 were by far the most prevalent honeybee viruses in queen populations, with distinctly higher prevalence in mated queens (100% and 67%, respectively for DWV and VDV-1 than in virgin queens (37% and 0%, respectively. Since very high viral titres could be recorded in the ovaries and abdomens of both functional and deficient queens, no significant correlation could be made between viral titre and ovarian degeneration or egg-laying deficiency among the wider population of queens. Although our data suggest that DWV and VDV-1 have a role in extreme cases of ovarian degeneration, infection of the ovaries by these viruses does not necessarily result in ovarian degeneration, even at high titres, and additional factors are likely to be involved in this pathology.

  17. Neutralization of Apis mellifera bee venom activities by suramin.

    Science.gov (United States)

    El-Kik, Camila Z; Fernandes, Fabrício F A; Tomaz, Marcelo Amorim; Gaban, Glauco A; Fonseca, Tatiane F; Calil-Elias, Sabrina; Oliveira, Suellen D S; Silva, Claudia L M; Martinez, Ana Maria Blanco; Melo, Paulo A

    2013-06-01

    In this work we evaluated the ability of suramin, a polysulfonated naphthylurea derivative, to antagonize the cytotoxic and enzymatic effects of the crude venom of Apis mellifera. Suramin was efficient to decrease the lethality in a dose-dependent way. The hemoconcentration caused by lethal dose injection of bee venom was abolished by suramin (30 μg/g). The edematogenic activity of the venom (0.3 μg/g) was antagonized by suramin (10 μg/g) in all treatment protocols. The changes in the vascular permeability caused by A. mellifera (1 μg/g) venom were inhibited by suramin (30 μg/g) in the pre- and posttreatment as well as when the venom was preincubated with suramin. In addition, suramin also inhibited cultured endothelial cell lesion, as well as in vitro myotoxicity, evaluated in mouse extensor digitorum longus muscle, which was inhibited by suramin (10 and 25 μM), decreasing the rate of CK release, showing that suramin protected the sarcolemma against damage induced by components of bee venom (2.5 μg/mL). Moreover, suramin inhibited the in vivo myotoxicity induced by i.m. injection of A. mellifera venom in mice (0.5 μg/g). The analysis of the area under the plasma CK vs. time curve showed that preincubation, pre- and posttreatment with suramin (30 μg/g) inhibited bee venom myotoxic activity in mice by about 89%, 45% and 40%, respectively. Suramin markedly inhibited the PLA2 activity in a concentration-dependent way (1-30 μM). Being suramin a polyanion molecule, the effects observed may be due to the interaction of its charges with the polycation components present in A. mellifera bee venom.

  18. An adaptive software defined radio design based on a standard space telecommunication radio system API

    Science.gov (United States)

    Xiong, Wenhao; Tian, Xin; Chen, Genshe; Pham, Khanh; Blasch, Erik

    2017-05-01

    Software defined radio (SDR) has become a popular tool for the implementation and testing for communications performance. The advantage of the SDR approach includes: a re-configurable design, adaptive response to changing conditions, efficient development, and highly versatile implementation. In order to understand the benefits of SDR, the space telecommunication radio system (STRS) was proposed by NASA Glenn research center (GRC) along with the standard application program interface (API) structure. Each component of the system uses a well-defined API to communicate with other components. The benefit of standard API is to relax the platform limitation of each component for addition options. For example, the waveform generating process can support a field programmable gate array (FPGA), personal computer (PC), or an embedded system. As long as the API defines the requirements, the generated waveform selection will work with the complete system. In this paper, we demonstrate the design and development of adaptive SDR following the STRS and standard API protocol. We introduce step by step the SDR testbed system including the controlling graphic user interface (GUI), database, GNU radio hardware control, and universal software radio peripheral (USRP) tranceiving front end. In addition, a performance evaluation in shown on the effectiveness of the SDR approach for space telecommunication.

  19. JEnsembl: a version-aware Java API to Ensembl data systems

    Science.gov (United States)

    Paterson, Trevor; Law, Andy

    2012-01-01

    Motivation: The Ensembl Project provides release-specific Perl APIs for efficient high-level programmatic access to data stored in various Ensembl database schema. Although Perl scripts are perfectly suited for processing large volumes of text-based data, Perl is not ideal for developing large-scale software applications nor embedding in graphical interfaces. The provision of a novel Java API would facilitate type-safe, modular, object-orientated development of new Bioinformatics tools with which to access, analyse and visualize Ensembl data. Results: The JEnsembl API implementation provides basic data retrieval and manipulation functionality from the Core, Compara and Variation databases for all species in Ensembl and EnsemblGenomes and is a platform for the development of a richer API to Ensembl datasources. The JEnsembl architecture uses a text-based configuration module to provide evolving, versioned mappings from database schema to code objects. A single installation of the JEnsembl API can therefore simultaneously and transparently connect to current and previous database instances (such as those in the public archive) thus facilitating better analysis repeatability and allowing ‘through time’ comparative analyses to be performed. Availability: Project development, released code libraries, Maven repository and documentation are hosted at SourceForge (http://jensembl.sourceforge.net). Contact: jensembl-develop@lists.sf.net, andy.law@roslin.ed.ac.uk, trevor.paterson@roslin.ed.ac.uk PMID:22945789

  20. An Effective Method for Protecting Native API Hook Attacks in User-mode

    Directory of Open Access Journals (Sweden)

    K. Muthumanickam

    2015-01-01

    Full Text Available Today, many modern malware developers is taking the advantage of Application Programming Interface (API hook technique to take the control of the victim computer which making it difficult to detect their presence. Because of the sophistication of rootkit tools, a remote attacker can use native API to compromise any computer which can later be used for many illegal activities such as sniffing network lines, capturing passwords, sending spam and DDoS attack, etc. Thus to protect end-system by identifying and preventing native API malicious code hooking is a challenging problem to the defenders. Today, many different malware-analysis tools incur specific features against malwares but manual and error-prone. In this study, we proposed a behavior-based monitoring detection system to effectively deal native API hooks in user-mode. Unlike other malware identification techniques, our approach involved dynamically analyzing the behavior of native API call hooking malwares. Comparing our experimental evaluation results with existing tools show better performance with no false positive.

  1. Produtos naturais no comportamento defensivo de Apis mellifera L. = Natural products in the defensive behaviour of Apis mellifera L.

    Directory of Open Access Journals (Sweden)

    Renata Leonardo Lomele

    2010-07-01

    Full Text Available Os objetivos do estudo foram investigar a influência de produtos naturais como capim-limão (Cymbopogon citratus, folhas de abacateiro (Persea americana, casca de café (Coffea arabica e sementes de mamona (Ricinus communis na defensividade de Apis mellifera, e avaliar o efeito destes produtos no desenvolvimento populacional da colmeia. O comportamento defensivo foi avaliado por meio do tempo da primeira ferroada (TPF, número de ferrões (NFB e, o desenvolvimento populacional, pela área de cria aberta e fechada. Observou-se que o tratamento fumaça + sete sementes de mamona apresentou aumento significativo no TPF, em relação ao tratamento sem e com fumaça de maravalha. Com relação ao NFB, verificou-se que os tratamentos fumaça de maravalha + sete sementes de mamona e fumaça de maravalha + 20% de folhas de café foram diferentes do tratamento sem e com fumaça. Os demais tratamentos não diferiram significativamente em relação ao uso da fumaça ou sua ausência. A casca de café e a semente de mamona nãointerferiram no desenvolvimento populacional, sugerindo que estes compostos não foram tóxicos. Pode-se concluir que o uso de sementes de mamona e casca de café na fumaça pode representar importante ferramenta para a redução da defensividade, sem promover toxicidade para A. mellifera.The goal was to investigate the influence of natural products such as lemongrass (Cymbopogon citratus, dried avocado leaves (Persea americana, coffee husk (Coffea arabica and castor bean (Ricinus communis in the defense of Apis mellifera, as well the effect of these products on the population development of the beehive. Defensive behavior was evaluated by time of first sting (TFS and number of stingers (NS, and population development, by open brood area and operculated brood. It was observed that the treatment with smoke + seven castor beans presented significant increase in the TFS, for treatment without and with smoke. Regarding NS, it was verified

  2. [New Approach to the Mitotype Classification in Black Honeybee Apis mellifera mellifera and Iberian Honeybee Apis mellifera iberiensis].

    Science.gov (United States)

    Ilyasov, R A; Poskryakov, A V; Petukhov, A V; Nikolenko, A G

    2016-03-01

    The black honeybee Apis mellifera mellifera L. is today the only subspecies of honeybee which is suitable for commercial breeding in the climatic conditions of Northern Europe with long cold winters. The main problem of the black honeybee in Russia and European countries is the preservation of the indigenous gene pool purity, which is lost as a result of hybridization with subspecies, A. m. caucasica, A. m. carnica, A. m. carpatica, and A. m. armeniaca, introduced from southern regions. Genetic identification of the subspecies will reduce the extent of hybridization and provide the gene pool conservation of the black honeybee. Modern classification of the honeybee mitotypes is mainly based on the combined use ofthe DraI restriction endonuclease recognition site polymorphism and sequence polymorphism of the mtDNA COI-COII region. We performed a comparative analysis of the mtDNA COI-COII region sequence polymorphism in the honeybees ofthe evolutionary lineage M from Ural and West European populations of black honeybee A. m. mellifera and Spanish bee A. m. iberiensis. A new approach to the classification of the honeybee M mitotypes was suggested. Using this approach and on the basis of the seven most informative SNPs of the mtDNA COI-COII region, eight honeybee mitotype groups were identified. In addition, it is suggested that this approach will simplify the previously proposed complicated mitotype classification and will make it possible to assess the level of the mitotype diversity and to identify the mitotypes that are the most valuable for the honeybee breeding and rearing.

  3. API SPEC 5L会标认证审核企业需做的主要准备工作%The Main Preparatory Work for Enterprise API SPEC 5L Monogram Certification

    Institute of Scientific and Technical Information of China (English)

    方晓东

    2009-01-01

    随着TSG Z0004标准实施和API SPEC 5L以及API SPEC Q1标准的换版,当前申请API SPEC 5L会标使用许可证的企业应及时做好各项准备工作,接受审核组的审核.审核前需做的准备工作主要包括:①及时与审核员充分沟通;②各种审核文件的整理和完善;③维护和保养生产现场设备,完善各岗位现场作业指导文件,确保现场各种记录完整清楚.%Along TSG Z0004 standard implement and renewal edition of API SPEC 5L and API SPEC Q1,enterprises should make all preparations for applying API SPEC 5L monogram use permit right to receive auditor check.The main preparatory work include:①to completely communicate with auditor in time;②to file and improve all kinds of documents which will be checked;③to maintain equipments in production site,improve each job-site guidance document,and insure all kinds of records integrity and clarity. Key words:certification audit;API SPEC 5L;API SPEC Q1;monogram use permit

  4. Using the RxNorm web services API for quality assurance purposes.

    Science.gov (United States)

    Peters, Lee; Bodenreider, Olivier

    2008-11-06

    Auditing large, rapidly evolving terminological systems is still a challenge. In the case of RxNorm, a standardized nomenclature for clinical drugs, we argue that quality assurance processes can benefit from the recently released application programming interface (API) provided by RxNav. We demonstrate the usefulness of the API by performing a systematic comparison of alternative paths in the RxNorm graph, over several thousands of drug entities. This study revealed potential errors in RxNorm, currently under review. The results also prompted us to modify the implementation of RxNav to navigate the RxNorm graph more accurately. The RxNav web services API used in this experiment is robust and fast.

  5. The SEMAINE API: Towards a Standards-Based Framework for Building Emotion-Oriented Systems

    Directory of Open Access Journals (Sweden)

    Marc Schröder

    2010-01-01

    Full Text Available This paper presents the SEMAINE API, an open source framework for building emotion-oriented systems. By encouraging and simplifying the use of standard representation formats, the framework aims to contribute to interoperability and reuse of system components in the research community. By providing a Java and C++ wrapper around a message-oriented middleware, the API makes it easy to integrate components running on different operating systems and written in different programming languages. The SEMAINE system 1.0 is presented as an example of a full-scale system built on top of the SEMAINE API. Three small example systems are described in detail to illustrate how integration between existing and new components is realised with minimal effort.

  6. An API for Integrating Spatial Context Models with Spatial Reasoning Algorithms

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun

    2006-01-01

    The integration of context-aware applications with spatial context models is often done using a common query language. However, algorithms that estimate and reason about spatial context information can benefit from a tighter integration. An object-oriented API makes such integration possible and ...... modeling. The utility of the API is evaluated in several real-world cases from an indoor location system, and spans several types of spatial reasoning algorithms.......The integration of context-aware applications with spatial context models is often done using a common query language. However, algorithms that estimate and reason about spatial context information can benefit from a tighter integration. An object-oriented API makes such integration possible...

  7. API2-MALT1 oncoprotein promotes lymphomagenesis via unique program of substrate ubiquitination and proteolysis

    Institute of Scientific and Technical Information of China (English)

    Shaun Rosebeck; Megan S Lim; Kojo SJ Elenitoba-Johnson; Linda MMcAllister-Lucas; Peter C Lucas

    2016-01-01

    Lymphoma of mucosa-associated lymphoid tissue(MALT lymphoma) is the most common extranodal B cell tumor and accounts for 8% of non-Hodgkin’s lymphomas. Gastric MALT lymphoma is the best-studied example and is a prototypical neoplasm that occurs in the setting of chronic inflammation brought on by persistent infection or autoimmune disease. Cytogenetic abnormalities are commonly acquired during the course of disease and the most common is chromosomal translocation t(11;18)(q21;q21), which creates the API2-MALT1 fusion oncoprotein. t(11;18)-positive lymphomas can be clinically aggressive and have a higher rate of dissemination than t(11;18)-negative tumors. Many cancers, including MALT lymphomas, characteristically exhibit deregulated over-activation of cellular survival pathways, such as the nuclear factor-κB(NF-κB) pathway. Molecular characterization of API2-MALT1 has revealed it to be a potent activator of NF-κB, which is required for API2-MALT1-induced cellular transformation, however the mechanisms by which API2-MALT1 exerts these effects are only recently becoming apparent. The API2 moiety of the fusion binds tumor necrosis factor(TNF) receptor associated factor(TRAF) 2 and receptor interacting protein 1(RIP1), two proteins essential for TNF receptor induced NF-κB activation. By effectively mimicking ligand-bound TNF receptor, API2-MALT1 promotes TRAF2-dependent ubiquitination of RIP1, which then acts as a scaffold for nucleating and activating the canonical NF-κB machinery. Activation occurs, in part, through MALT1 moiety-dependent recruitment of TRAF6, which can directly modify NF-κB essential modulator, the principal downstream regulator of NF-κB. While theintrinsic MALT1 protease catalytic activity is dispensable for this canonical NF-κB signaling, it is critical for noncanonical NF-κB activation. In this regard, API2-MALT1 recognizes NF-κB inducing kinase(NIK), the essential upstream regulator of non-canonical NF-κB, and cleaves it to generate

  8. API2-MALT1 oncoprotein promotes lymphomagenesis via unique program of substrate ubiquitination and proteolysis.

    Science.gov (United States)

    Rosebeck, Shaun; Lim, Megan S; Elenitoba-Johnson, Kojo S J; McAllister-Lucas, Linda M; Lucas, Peter C

    2016-02-26

    Lymphoma of mucosa-associated lymphoid tissue (MALT lymphoma) is the most common extranodal B cell tumor and accounts for 8% of non-Hodgkin's lymphomas. Gastric MALT lymphoma is the best-studied example and is a prototypical neoplasm that occurs in the setting of chronic inflammation brought on by persistent infection or autoimmune disease. Cytogenetic abnormalities are commonly acquired during the course of disease and the most common is chromosomal translocation t(11;18)(q21;q21), which creates the API2-MALT1 fusion oncoprotein. t(11;18)-positive lymphomas can be clinically aggressive and have a higher rate of dissemination than t(11;18)-negative tumors. Many cancers, including MALT lymphomas, characteristically exhibit deregulated over-activation of cellular survival pathways, such as the nuclear factor-κB (NF-κB) pathway. Molecular characterization of API2-MALT1 has revealed it to be a potent activator of NF-κB, which is required for API2-MALT1-induced cellular transformation, however the mechanisms by which API2-MALT1 exerts these effects are only recently becoming apparent. The API2 moiety of the fusion binds tumor necrosis factor (TNF) receptor associated factor (TRAF) 2 and receptor interacting protein 1 (RIP1), two proteins essential for TNF receptor-induced NF-κB activation. By effectively mimicking ligand-bound TNF receptor, API2-MALT1 promotes TRAF2-dependent ubiquitination of RIP1, which then acts as a scaffold for nucleating and activating the canonical NF-κB machinery. Activation occurs, in part, through MALT1 moiety-dependent recruitment of TRAF6, which can directly modify NF-κB essential modulator, the principal downstream regulator of NF-κB. While the intrinsic MALT1 protease catalytic activity is dispensable for this canonical NF-κB signaling, it is critical for non-canonical NF-κB activation. In this regard, API2-MALT1 recognizes NF-κB inducing kinase (NIK), the essential upstream regulator of non-canonical NF-κB, and cleaves it to

  9. APIS : a value-added database of HST UV planetary auroral observations acquired since 1997

    Science.gov (United States)

    Lamy, L.; Henry, F.; Prangé, R.; Le Sidaner, P.

    2014-04-01

    The APIS service http://lesia.obspm.fr/apis/ (Auroral Planetary Imaging and Spectroscopy), aimed at facilitating the use of planetary auroral observations, was presented at EPSC last year, following its opening to the community in July 2013. This facility consists of : - a high level database derived from public Far-UV observations of Jupiter, Io, Ganymede, Saturn, Titan and Uranus acquired by the Hubble Space Telescope since 1997 (36 observational campaigns so far) ; - a specific search interface (Figure 1), aimed at browsing the database freely, quickly and efficiently through relevant search criteria (as planetary longitudes, moon or spacecraft ephemeris etc.). - Virtual-Observatory tools which enable the user to interactively work with images and spectra online. We will present the updated capabilities of APIS and illustrate them with several examples. Several tutorials are also directly available online.

  10. A Comparison of Article Search APIs via Blinded Experiment and Developer Review

    Directory of Open Access Journals (Sweden)

    Jonathan Rochkind

    2013-01-01

    Full Text Available This study looks at perceived user preference between products that can provide a scholarly article search service via an application programming interface (API. The study set up a blinded review and asked users at Johns Hopkins to select the service that provided the most useful results. Few statistically significant preferences were detected, and some interpretation is provided of what the results might tell us. The specific products evaluated for this study are: Serials Solutions Summon, Ex Libris Primo, EBSCO EDS, EBSCOHost ‘traditional’ API, and Elsevier Scopus. Re-usable open source tools for implementing article search were created to support the study and future development, and a developer review of the APIs is included based on the developer's experience in this implementation.

  11. Studi Eksperimen Distribusi Temperatur Nyala Api Kompor Bioetanol Tipe Side Burner dengan Variasi Diameter Firewall

    Directory of Open Access Journals (Sweden)

    R.R. Vienna Sona Saputri Soetadi

    2012-09-01

    Full Text Available Untuk mendapatkan kompor bioetanol efisiensi thermal maksimal diperlukan penelitian komprehensif. Salah satunya adalah penelitian terhadap posisi peletakkan beban pada kompor bioetanol kompak. Pengujian dilakukan pada kompor uji bioetanol dengan kadar 99%, yaitu kompor bioetanol tipe side burner dengan firewall 2.5 inci dan firewall 3 inci. Pengukuran temperatur api dengan 13 thermocouple K dengan pengukuran searah api keatas setiap 5 mm-an. Kemudian, water boiling test dilakukan untuk mendapatkan daya dan beban dan dilanjutkan mengukur waktu pendidihan air. Hasil penelitian ini menunjukkan gambaran total distribusi temperatur nyala api difusi. Hasil menunjukkan untuk kompor 2.5 inci dengan daya 1.6 kW mempunyai temperatur 542 ºC dengan jarak ketinggian 5 mm dari rim kompor sedangkan kompor 3 inci menghasilkan daya 2.38 kW dengan temperatur 516 ºC.

  12. MicroRNA-1 promotes apoptosis of hepatocarcinoma cells by targeting apoptosis inhibitor-5 (API-5).

    Science.gov (United States)

    Li, Dong; Liu, Yu; Li, Hua; Peng, Jing-Jing; Tan, Yan; Zou, Qiang; Song, Xiao-Feng; Du, Min; Yang, Zheng-Hui; Tan, Yong; Zhou, Jin-Jun; Xu, Tao; Fu, Zeng-Qiang; Feng, Jian-Qiong; Cheng, Peng; chen, Tao; Wei, Dong; Su, Xiao-Mei; Liu, Huan-Yi; Qi, Zhong-Chun; Tang, Li-Jun; Wang, Tao; Guo, Xin; Hu, Yong-He; Zhang, Tao

    2015-01-02

    Although microRNA-1 (miR-1) is a known liver cancer suppressor, the role of miR-1 in apoptosis of hepatoma cells has remained largely unknown. Our study shows that ectopic miR-1 overexpression induced apoptosis of liver hepatocellular carcinoma (HepG2) cells. Apoptosis inhibitor 5 (API-5) was found to be a potential regulator of miR-1 induced apoptosis, using a bioinformatics approach. Furthermore, an inverse relationship between miR-1 and API-5 expression was observed in human liver cancer tissues and adjacent normal liver tissues. Negative regulation of API-5 expression by miR-1 was demonstrated to promote apoptosis of HepG2 cells. Our study provides a novel regulatory mechanism of miR-1 in the apoptosis of hepatoma cells.

  13. The Design and Implementation of Cryptographic API%加密API的设计与实现

    Institute of Scientific and Technical Information of China (English)

    王军

    2004-01-01

    文章设计了一种简单易用、可扩展和可移植的加密API,简称SEPC-API.SEPC-API采用标准的C/C++来编写,并使用抽象密钥类分层结构来构造.文中详细描述了SEPC-API的设计和实现,并给出了应用示例.此外,SEPC-API中的多数函数设计遵循微软Crypto API的语法,这意味着微软Crypto API用户只需修改很少的代码就可以移植到SEPC-API.

  14. 360-MAM-Affect: Sentiment Analysis with the Google Prediction API and EmoSenticNet

    Directory of Open Access Journals (Sweden)

    Eleanor Mulholland

    2015-08-01

    Full Text Available Online recommender systems are useful for media asset management where they select the best content from a set of media assets. We have developed an architecture for 360-MAM- Select, a recommender system for educational video content. 360-MAM-Select will utilise sentiment analysis and gamification techniques for the recommendation of media assets. 360-MAM-Select will increase user participation with digital content through improved video recommendations. Here, we discuss the architecture of 360-MAM-Select and the use of the Google Prediction API and EmoSenticNet for 360-MAM-Affect, 360-MAM-Select's sentiment analysis module. Results from testing two models for sentiment analysis, Sentiment Classifier (Google Prediction API and EmoSenticNetClassifer (Google Prediction API + EmoSenticNet are promising. Future work includes the implementation and testing of 360-MAM-Select on video data from YouTube EDU and Head Squeeze.

  15. AN OVERVIEW OF THE UNCERTAINTY ANALYSIS, SENSITIVITY ANALYSIS, AND PARAMETER ESTIMATION (UA/SA/PE) API AND HOW TO IMPLEMENT IT

    Science.gov (United States)

    The Application Programming Interface (API) for Uncertainty Analysis, Sensitivity Analysis, andParameter Estimation (UA/SA/PE API) (also known as Calibration, Optimization and Sensitivity and Uncertainty (CUSO)) was developed in a joint effort between several members of both ...

  16. An overview of the CellML API and its implementation

    Directory of Open Access Journals (Sweden)

    Halstead Matt

    2010-04-01

    Full Text Available Abstract Background CellML is an XML based language for representing mathematical models, in a machine-independent form which is suitable for their exchange between different authors, and for archival in a model repository. Allowing for the exchange and archival of models in a computer readable form is a key strategic goal in bioinformatics, because of the associated improvements in scientific record accuracy, the faster iterative process of scientific development, and the ability to combine models into large integrative models. However, for CellML models to be useful, tools which can process them correctly are needed. Due to some of the more complex features present in CellML models, such as imports, developing code ab initio to correctly process models can be an onerous task. For this reason, there is a clear and pressing need for an application programming interface (API, and a good implementation of that API, upon which tools can base their support for CellML. Results We developed an API which allows the information in CellML models to be retrieved and/or modified. We also developed a series of optional extension APIs, for tasks such as simplifying the handling of connections between variables, dealing with physical units, validating models, and translating models into different procedural languages. We have also provided a Free/Open Source implementation of this application programming interface, optimised to achieve good performance. Conclusions Tools have been developed using the API which are mature enough for widespread use. The API has the potential to accelerate the development of additional tools capable of processing CellML, and ultimately lead to an increased level of sharing of mathematical model descriptions.

  17. Physicochemical characterisation and investigation of the bonding mechanisms of API-titanate nanotube composites as new drug carrier systems.

    Science.gov (United States)

    Sipos, Barbara; Pintye-Hódi, Klára; Kónya, Zoltán; Kelemen, András; Regdon, Géza; Sovány, Tamás

    2017-02-25

    Titanate nanotube (TNT) has recently been explored as a new carrier material for active pharmaceutical ingredients (API). The aim of the present work was to reveal the physicochemical properties of API-TNT composites, focusing on the interactions between the TNTs and the incorporated APIs. Drugs belonging to different Biopharmaceutical Classification System (BCS) classes were loaded into TNTs: diltiazem hydrochloride (BCS I.), diclofenac sodium (BCS II.), atenolol (BCS III.) and hydrochlorothiazide (BCS IV.). Experimental results demonstrated that it is feasible for spiral cross-sectioned titanate nanotubes to carry drugs and maintain their bioactivity. The structural properties of the composites were characterized by a range of analytical techniques, including FT-IR, DSC, TG-MS, etc. The interactions between APIs and TNTs were identified as electrostatic attractions, mainly dominated by hydrogen bonds. Based on the results, it can be stated that the strength of the association depends on the hydrogen donor strength of the API. The drug release of incorporated APIs was evaluated from compressed tablets and compared to that of pure APIs. Differences noticed in the dissolution profiles due to incorporation showed a correlation with the strength of interactions between the APIs and the TNTs observed in the above analytical studies. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. There-apy: The Use of Task, Imagery, and Symbolism To Connect the Inner and Outer Worlds.

    Science.gov (United States)

    Eisenstein-Naveh, A. Rosa

    2001-01-01

    Presents a model of therapy called there-apy, which weaves together the use of task, symbolism, and imagery into an ongoing process. Concrete tasks take on symbolic meaning, and symbolism gets actualized through achieving concrete tasks. There-apy connects the individual's outside and inside worlds and often involves the partner or family in the…

  19. Predominant Api m 10 sensitization as risk factor for treatment failure in honey bee venom immunotherapy

    DEFF Research Database (Denmark)

    Frick, Marcel; Fischer, Jörg; Helbling, Arthur;

    2016-01-01

    BACKGROUND: Component resolution recently identified distinct sensitization profiles in honey bee venom (HBV) allergy, some of which were dominated by specific IgE to Api m 3 and/or Api m 10, which have been reported to be underrepresented in therapeutic HBV preparations. OBJECTIVE: We performed...... a retrospective analysis of component-resolved sensitization profiles in HBV-allergic patients and association with treatment outcome. METHODS: HBV-allergic patients who had undergone controlled honey bee sting challenge after at least 6 months of HBV immunotherapy (n = 115) were included and classified...

  20. Develop 3G Application with The J2ME SATSA API

    Science.gov (United States)

    JunWu, Xu; JunLing, Liang

    This paper describes research in the use of the Security and Trust Services API for J2ME (SATSA) to develop mobile applications. for 3G networks. SATSA defines a set of APIs that allows J2ME applications to communicate with and access functionality, secure storage and cryptographic operations provided by security elements such as smart cards and Wireless Identification Modules (WIM). A Java Card application could also work as an authentication module in a J2ME-based e-bank application. The e-bank application would allow its users to access their bank accounts using their cell phones.

  1. Oriental orchid (Cymbidium pumilum) attracts drones of the Japanese honeybee (Apis cerana japonica) as pollinators.

    Science.gov (United States)

    Sasaki, M; Ono, M; Asada, S; Yoshida, T

    1991-12-01

    The discovery that drones of the Japanese honeybee (Apis cerana japonica) pollinate the oriental orchid (Cymbidium pumilum) is reported. Drones are attracted to the orchid flower aroma mainly during their mating flights in April through May. Some drones cluster on the flower racemes and others insert their heads deep into the flowers. Drones with pollinia on their scutellum visit other orchids, which facilitates pollination. Individual workers and swarming colonies are also strongly attracted by the flower aroma, but the allopatric western honeybee (Apis mellifera) is not attracted.

  2. Heterosis en la longevidad de obreras Apis mielífera

    Directory of Open Access Journals (Sweden)

    Soares AE.

    2001-06-01

    Full Text Available Se estimó la media y la heterosis de la longevidad en obreras de abejas Apis mellifera. El expe-rimento fue desarrollado en el Apiario del Departamento de Genética de la Facultad de Medi-cina de la USP-Ribeirão Preto-Brasil y en Jaboticabal-SP, de 03/1997 a 05/1999. Seleccionamos 8 matrices inseminadas del apiário-USP (2africanizadas, 2italianas, 2cárnicasy 2italianas*cárnicos y 2 matrices (grupo-testigo de abejas Africanizadas-Silvestres.

  3. When is it Biased? Assessing the Representativeness of Twitter's Streaming API

    OpenAIRE

    Morstatter, Fred; Pfeffer, Jürgen; Liu, Huan

    2014-01-01

    Twitter has captured the interest of the scientific community not only for its massive user base and content, but also for its openness in sharing its data. Twitter shares a free 1% sample of its tweets through the "Streaming API", a service that returns a sample of tweets according to a set of parameters set by the researcher. Recently, research has pointed to evidence of bias in the data returned through the Streaming API, raising concern in the integrity of this data service for use in res...

  4. A geographical information system using the Google Map API for guidance to referral hospitals.

    Science.gov (United States)

    Kobayashi, Shinji; Fujioka, Tetsushi; Tanaka, Yuji; Inoue, Michiyoshi; Niho, Yoshiyuki; Miyoshi, Akira

    2010-12-01

    Our hospital acts as a regional core hospital through inter-hospital collaboration. Geographical information is necessary to guide patients to the other hospitals. Although paper maps, which contain directions, nearest public transportation, etc., are usually provided to guide patients to the hospitals, the geographical information tends to change daily. However, updating the geographical information on the maps is costly. We constructed an electronic geographical information system using the Google Map API ( http://code.google.com/apis/maps/ ) with open source software to improve our ability to collaborate with other clinics.

  5. The Assessment of DNA in Royal Jelly from Apis mellifera and Apis cerana by RAPD markers%中蜂与意蜂王浆中DNA的RAPD分析

    Institute of Scientific and Technical Information of China (English)

    邹阳; 黄康; 颜伟玉; 曾志将

    2007-01-01

    以中华蜜蜂(Apis cerana cerana)和意大利蜜蜂( Apis mellifera ligustica)王浆为材料,用改进的苯酚-氯仿法提取蜂王浆中的DNA,利用35个随机引物对提取出来的DNA进行RAPD扩增,结果表明:有6个随机引物能扩增出谱带,其中1个引物对所有王浆DNA样品的扩增结果完全相同,5个引物出现多态性.共检测到32条扩增谱带,其中24条为多态带.

  6. An example of how to handle amorphous fractions in API during early pharmaceutical development: SAR114137--a successful approach.

    Science.gov (United States)

    Petzoldt, Christine; Bley, Oliver; Byard, Stephen J; Andert, Doris; Baumgartner, Bruno; Nagel, Norbert; Tappertzhofen, Christoph; Feth, Martin Philipp

    2014-04-01

    The so-called pharmaceutical solid chain, which encompasses drug substance micronisation to the final tablet production, at pilot plant scale is presented as a case study for a novel, highly potent, pharmaceutical compound: SAR114137. Various solid-state analytical methods, such as solid-state Nuclear Magnetic Resonance (ssNMR), Differential Scanning Calorimetry (DSC), Dynamic Water Vapour Sorption Gravimetry (DWVSG), hot-stage Raman spectroscopy and X-ray Powder Diffraction (XRPD) were applied and evaluated to characterise and quantify amorphous content during the course of the physical treatment of crystalline active pharmaceutical ingredient (API). DSC was successfully used to monitor the changes in amorphous content during micronisation of the API, as well as during stability studies. (19)F solid-state NMR was found to be the method of choice for the detection and quantification of low levels of amorphous API, even in the final drug product (DP), since compaction during tablet manufacture was identified as a further source for the formation of amorphous API. The application of different jet milling techniques was a critical factor with respect to amorphous content formation. In the present case, the change from spiral jet milling to loop jet milling led to a decrease in amorphous API content from 20-30 w/w% to nearly 0 w/w% respectively. The use of loop jet milling also improved the processability of the API. Stability investigations on both the milled API and the DP showed a marked tendency for recrystallisation of the amorphous API content on exposure to elevated levels of relative humidity. No significant impact of amorphous API on either the chemical stability or the dissolution rate of the API in drug formulation was observed. Therefore, the presence of amorphous content in the oral formulation was of no consequence for the clinical trial phases I and II.

  7. Insights into social insects from the genome of the honeybee Apis mellifera

    DEFF Research Database (Denmark)

    Hauser, Frank; Cazzamali, Giuseppe; Williamson, Michael

    2006-01-01

    Here we report the genome sequence of the honeybee Apis mellifera, a key model for social behaviour and essential to global ecology through pollination. Compared with other sequenced insect genomes, the A. mellifera genome has high A+T and CpG contents, lacks major transposon families, evolves mo...

  8. Reliability of the Advanced Psychodiagnostic Interpretation (API) Scoring System for the Bender Gestalt.

    Science.gov (United States)

    Aucone, Ernest J.; Raphael, Alan J.; Golden, Charles J.; Espe-Pfeifer, Patricia; Seldon, Jen; Pospisil, Tanya; Dornheim, Liane; Proctor-Weber, Zoe; Calabria, Michael

    1999-01-01

    Assessed the interrater reliability of the revised Advanced Psychodiagnostic Interpretation (API) (A. Raphael and C. Golden, 1998) scoring system for the Bender Gestalt Test (L. Bender, 1938). Agreement across nine raters exceeded 90% for each of three clinical protocols, and kappa statistics indicated good interrater reliability. (SLD)

  9. Dispersibility of lactose fines as compared to API in dry powders for inhalation.

    Science.gov (United States)

    Thalberg, Kyrre; Åslund, Simon; Skogevall, Marcus; Andersson, Patrik

    2016-05-17

    This work investigates the dispersion performance of fine lactose particles as function of processing time, and compares it to the API, using Beclomethasone Dipropionate (BDP) as model API. The total load of fine particles is kept constant in the formulations while the proportions of API and lactose fines are varied. Fine particle assessment demonstrates that the lactose fines have higher dispersibility than the API. For standard formulations, processing time has a limited effect on the Fine Particle Fraction (FPF). For formulations containing magnesium stearate (MgSt), FPF of BDP is heavily influenced by processing time, with an initial increase, followed by a decrease at longer mixing times. An equation modeling the observed behavior is presented. Surprisingly, the dispersibility of the lactose fines present in the same formulation remains unaffected by mixing time. Magnesium analysis demonstrates that MgSt is transferred to the fine particles during the mixing process, thus lubrication both BDP and lactose fines, which leads to an increased FPF. Dry particle sizing of the formulations reveals a loss of fine particles at longer mixing times. Incorporation of fine particles into the carrier surfaces is believed to be behind this, and is hence a mechanism of importance as regards the dispersion performance of dry powders for inhalation.

  10. ApiNATOMY: a novel toolkit for visualizing multiscale anatomy schematics with phenotype-related information.

    Science.gov (United States)

    de Bono, Bernard; Grenon, Pierre; Sammut, Stephen John

    2012-05-01

    A significant proportion of biomedical resources carries information that cross references to anatomical structures across multiple scales. To improve the visualization of such resources in their anatomical context, we developed an automated methodology that produces anatomy schematics in a consistent manner,and provides for the overlay of anatomy-related resource information onto the same diagram. This methodology, called ApiNATOMY, draws upon the topology of ontology graphs to automatically lay out treemaps representing body parts as well as semantic metadata linking to such ontologies. More generally, ApiNATOMY treemaps provide an efficient and manageable way to visualize large biomedical ontologies in a meaningful and consistent manner. In the anatomy domain, such treemaps will allow epidemiologists, clinicians, and biomedical scientists to review, and interact with, anatomically aggregated heterogeneous data and model resources. Such an approach supports the visual identification of functional relations between anatomically colocalized resources that may not be immediately amenable to automation by ontology-based inferencing. We also describe the application of ApiNATOMY schematics to integrate, and add value to, human phenotype-related information—results are found at http://apinatomy.org. The long-term goal for the ApiNATOMY toolkit is to support clinical and scientific graphical user interfaces and dashboards for biomedical resource management and data analytics.

  11. The synergistic effects of almond protection fungicides on honey bee (Apis mellifera) forager survival

    Science.gov (United States)

    The honey bee (Apis mellifera) contributes approximately $17 billion annually in pollination services performed for major agricultural crops in the United States including almond, which is completely dependent on honey bee pollination for nut set. Almond growers face challenges to crop productivity ...

  12. Synergistic effects of non-Apis bees and honey bees for pollination services.

    Science.gov (United States)

    Brittain, Claire; Williams, Neal; Kremen, Claire; Klein, Alexandra-Maria

    2013-03-07

    In diverse pollinator communities, interspecific interactions may modify the behaviour and increase the pollination effectiveness of individual species. Because agricultural production reliant on pollination is growing, improving pollination effectiveness could increase crop yield without any increase in agricultural intensity or area. In California almond, a crop highly dependent on honey bee pollination, we explored the foraging behaviour and pollination effectiveness of honey bees in orchards with simple (honey bee only) and diverse (non-Apis bees present) bee communities. In orchards with non-Apis bees, the foraging behaviour of honey bees changed and the pollination effectiveness of a single honey bee visit was greater than in orchards where non-Apis bees were absent. This change translated to a greater proportion of fruit set in these orchards. Our field experiments show that increased pollinator diversity can synergistically increase pollination service, through species interactions that alter the behaviour and resulting functional quality of a dominant pollinator species. These results of functional synergy between species were supported by an additional controlled cage experiment with Osmia lignaria and Apis mellifera. Our findings highlight a largely unexplored facilitative component of the benefit of biodiversity to ecosystem services, and represent a way to improve pollinator-dependent crop yields in a sustainable manner.

  13. Spatial and temporal variation of metal concentrations in adult honeybees (Apis mellifera L.)

    NARCIS (Netherlands)

    Steen, van der J.J.M.; Kraker, J.; Grotenhuis, J.T.C.

    2012-01-01

    Honeybees (Apis mellifera L.) have great potential for detecting and monitoring environmental pollution, given their wide-ranging foraging behaviour. Previous studies have demonstrated that concentrations of metals in adult honeybees were significantly higher at polluted than at control locations. T

  14. ACME algorithms for contact in a multiphysics environment API version 2.2.

    Energy Technology Data Exchange (ETDEWEB)

    Heinstein, Martin Wilhelm; Glass, Micheal W.; Gullerud, Arne S.; Brown, Kevin H.; Voth, Thomas Eugene; Jones, Reese E.

    2004-07-01

    An effort is underway at Sandia National Laboratories to develop a library of algorithms to search for potential interactions between surfaces represented by analytic and discretized topological entities. This effort is also developing algorithms to determine forces due to these interactions for transient dynamics applications. This document describes the Application Programming Interface (API) for the ACME (Algorithms for Contact in a Multiphysics Environment) library.

  15. Insights into social insects from the genome of the honeybee Apis mellifera

    DEFF Research Database (Denmark)

    Hauser, Frank; Cazzamali, Giuseppe; Williamson, Michael

    2006-01-01

    Here we report the genome sequence of the honeybee Apis mellifera, a key model for social behaviour and essential to global ecology through pollination. Compared with other sequenced insect genomes, the A. mellifera genome has high A+T and CpG contents, lacks major transposon families, evolves more...

  16. Testing of the structure of macromolecular polymer films containing solid active pharmaceutical ingredient (API) particles

    Energy Technology Data Exchange (ETDEWEB)

    Boelcskei, E. [Department of Pharmaceutical Technology, University of Szeged, H-6720 Szeged, Eoetvoes u. 6 (Hungary); Suevegh, K. [Laboratory of Nuclear Chemistry, Eoetvoes Lorand University, H-1518 Budapest 112, P.O. Box 32 (Hungary); Marek, T. [Hungarian Academy of Sciences, Research Group for Nuclear Techniques in Structural Chemistry, Eoetvoes Lorand University, H-1518 Budapest 112, P.O. Box 32 (Hungary); Regdon, G. [Department of Pharmaceutical Technology, University of Szeged, H-6720 Szeged, Eoetvoes u. 6 (Hungary); Pintye-Hodi, K., E-mail: klara.hodi@pharm.u-szeged.h [Department of Pharmaceutical Technology, University of Szeged, H-6720 Szeged, Eoetvoes u. 6 (Hungary)

    2011-07-15

    The aim of the present study was to investigate the structure of free films of Eudragit{sup L} 30D-55 containing different concentrations (0%, 1% or 5%) of diclofenac sodium by positron annihilation spectroscopy. The data revealed that the size of the free-volume holes and the lifetimes of ortho-positronium atoms decreased with increase of the API concentration. Films containing 5% of the API exhibited a different behavior during storage (17 {sup o}C, 65% relative humidity (RH)) in consequence of the uptake of water from the air. -- Highlights: {yields} The aim of the present study was to investigate the structure of free films of Eudragit{sup L} 30D-55 containing different concentrations (0%, 1% or 5%) of diclofenac sodium by positron annihilation spectroscopy. {yields} The data revealed that the size of the free-volume holes and the lifetimes of ortho-positronium atoms decreased with increase of the API concentration (). {yields} The API distorts the original polymer structure, but as time goes by, the metastable structure relaxes and it is almost totally restored after 3 weeks of storage (17 {sup o}C, 65% RH).

  17. Concurrent infestations by Aethina tumida and Varroa destructor alters thermoregulation in Apis mellifera winter clusters

    Science.gov (United States)

    The small hive beetle, Aethina tumida, and the ectoparasitic mite, Varroa destructor, are parasites of the honeybee, Apis mellifera. Both parasites overwinter in honeybee colonies. The efficacy of thermoregulation might be reduced in beetle and mite infested clusters, due to altered activity of host...

  18. Sperm use economy of honeybee (Apis mellifera) queens

    DEFF Research Database (Denmark)

    Baer, Boris; Collins, Jason; Maalaps, Kristiina;

    2016-01-01

    the fecundity and longevity of queens and therefore colony fitness. We quantified the number of sperm that honeybee (Apis mellifera) queens use to fertilize eggs. We examined sperm use in naturally mated queens of different ages and in queens artificially inseminated with different volumes of semen. We found...

  19. Gas chromatography coupled to atmospheric pressure ionization mass spectrometry (GC-API-MS): review.

    Science.gov (United States)

    Li, Du-Xin; Gan, Lin; Bronja, Amela; Schmitz, Oliver J

    2015-09-03

    Although the coupling of GC/MS with atmospheric pressure ionization (API) has been reported in 1970s, the interest in coupling GC with atmospheric pressure ion source was expanded in the last decade. The demand of a "soft" ion source for preserving highly diagnostic molecular ion is desirable, as compared to the "hard" ionization technique such as electron ionization (EI) in traditional GC/MS, which fragments the molecule in an extensive way. These API sources include atmospheric pressure chemical ionization (APCI), atmospheric pressure photoionization (APPI), atmospheric pressure laser ionization (APLI), electrospray ionization (ESI) and low temperature plasma (LTP). This review discusses the advantages and drawbacks of this analytical platform. After an introduction in atmospheric pressure ionization the review gives an overview about the history and explains the mechanisms of various atmospheric pressure ionization techniques used in combination with GC such as APCI, APPI, APLI, ESI and LTP. Also new developments made in ion source geometry, ion source miniaturization and multipurpose ion source constructions are discussed and a comparison between GC-FID, GC-EI-MS and GC-API-MS shows the advantages and drawbacks of these techniques. The review ends with an overview of applications realized with GC-API-MS.

  20. Polymorphic DNA sequences of the fungal honey bee pathogen Ascosphaera apis

    DEFF Research Database (Denmark)

    Jensen, Annette B; Welker, Dennis L; Kryger, Per

    2012-01-01

    was then compared among the different loci, and three were found to have the greatest detection power for identifying A. apis haplotypes. The described loci can help to resolve strain differences and population genetic structures, to elucidate host–pathogen interaction and to test evolutionary hypotheses...

  1. Responses of Varroa-resistant honey bees (Apis mellifera L.) to Deformed wing virus

    Science.gov (United States)

    The negative impact of Deformedwing virus (DWV) on European honey bees Apis mellifera is magnified by Varroa destructor parasitism. This study compared the responses of two Varroa-resistant honey bee stocks, pure Russian honey bees (RHB) and out-crossed Varroa Sensitive Hygienic bees, Pol-line (POL)...

  2. Young and old honey bee (Apis mellifera) larvae differentially prime the developmental maturation of their caregivers

    Science.gov (United States)

    In eusocial insects daughters rear the offspring of the queen to adulthood. In the honey bee, Apis mellifera, nurses differentially regulate larval nutrition. Among worker-destined larvae, younger instars receive an unrestricted diet paralleling that of queen larvae in protein composition but with r...

  3. Involvement of Phosphorylated "Apis Mellifera" CREB in Gating a Honeybee's Behavioral Response to an External Stimulus

    Science.gov (United States)

    Gehring, Katrin B.; Heufelder, Karin; Feige, Janina; Bauer, Paul; Dyck, Yan; Ehrhardt, Lea; Kühnemund, Johannes; Bergmann, Anja; Göbel, Josefine; Isecke, Marlene; Eisenhardt, Dorothea

    2016-01-01

    The transcription factor cAMP-response element-binding protein (CREB) is involved in neuronal plasticity. Phosphorylation activates CREB and an increased level of phosphorylated CREB is regarded as an indicator of CREB-dependent transcriptional activation. In honeybees ("Apis mellifera") we recently demonstrated a particular high…

  4. Identification of clinical yeasts by Vitek MS system compared with API ID 32 C.

    Science.gov (United States)

    Durán-Valle, M Teresa; Sanz-Rodríguez, Nuria; Muñoz-Paraíso, Carmen; Almagro-Moltó, María; Gómez-Garcés, José Luis

    2014-05-01

    We performed a clinical evaluation of the Vitek MS matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) system with the commercial database version 2.0 for rapid identification of medically important yeasts as compared with the conventional phenotypic method API ID 32 C. We tested 161 clinical isolates, nine isolates from culture collections and five reference strains. In case of discrepant results or no identification with one or both methods, molecular identification techniques were employed. Concordance between both methods was observed with 160/175 isolates (91.42%) and misidentifications by both systems occurred only when taxa were not included in the respective databases, i.e., one isolate of Candida etchellsii was identified as C. globosa by Vitek MS and two isolates of C. orthopsilosis were identified as C. parapsilosis by API ID 32 C. Vitek MS could not identify nine strains (5.14%) and API ID 32 C did not identify 13 (7.42%). Vitek MS was more reliable than API ID 32 C and reduced the time required for the identification of clinical isolates to only a few minutes.

  5. Continuous API-crystal coating via coacervation in a tubular reactor.

    Science.gov (United States)

    Besenhard, M O; Thurnberger, A; Hohl, R; Faulhammer, E; Rattenberger, J; Khinast, J G

    2014-11-20

    We present a proof-of-concept study of a continuous coating process of single API crystals in a tubular reactor using coacervation as a microencapsulation technique. Continuous API crystal coating can have several advantages, as in a single step (following crystallization) individual crystals can be prepared with a functional coating, either to change the release behavior, to protect the API from gastric juice or to modify the surface energetics of the API (i.e., to tailor the hydrophobic/hydrophilic characteristics, flowability or agglomeration tendency, etc.). The coating process was developed for the microencapsulation of a lipophilic core material (ibuprofen crystals of 20 μm- to 100 μm-size), with either hypromellose phthalate (HPMCP) or Eudragit L100-55. The core material was suspended in an aqueous solution containing one of these enteric polymers, fed into the tubing and mixed continuously with a sodium sulfate solution as an antisolvent to induce coacervation. A subsequent temperature treatment was applied to optimize the microencapsulation of crystals via the polymer-rich coacervate phase. Cross-linking of the coating shell was achieved by mixing the processed material with an acidic solution (pH<3). Flow rates, temperature profiles and polymer-to-antisolvent ratios had to be tightly controlled to avoid excessive aggregation, leading to pipe plugging. This work demonstrates the potential of a tubular reactor design for continuous coating applications and is the basis for future work, combining continuous crystallization and coating.

  6. Does Year Round Schooling Affect the Outcome and Growth of California's API Scores?

    Science.gov (United States)

    Wu, Amery D.; Stone, Jake E.

    2010-01-01

    This paper examined whether year round schooling (YRS) in California had an effect upon the outcome and growth of schools' Academic Performance Index (API) scores. While many previous studies had examined the connection between YRS and academic achievement, most had lacked the statistical rigour required to provide reliable interpretations. As a…

  7. An Auto-Configuration System for the GMSEC Architecture and API

    Science.gov (United States)

    Moholt, Joseph; Mayorga, Arturo

    2007-01-01

    A viewgraph presentation on an automated configuration concept for The Goddard Mission Services Evolution Center (GMSEC) architecture and Application Program Interface (API) is shown. The topics include: 1) The Goddard Mission Services Evolution Center (GMSEC); 2) Automated Configuration Concept; 3) Implementation Approach; and 4) Key Components and Benefits.

  8. ANALISIS PERMINTAAN PERJALANAN PENGGUNA JASA KERETA API EKSEKUTIF RUTE SEMARANG-JAKARTA

    Directory of Open Access Journals (Sweden)

    MG. Endang Sri Utari

    2017-06-01

    Full Text Available Penelitian ini berjutuan menganalisis pengaruh pendapatan konsumen, harga tiket kereta api, persepsi harga tiket pesawat, kualitas layanan, jenis kereta api, dan adanya tiket promo pesawat terhadap permintaan kereta api eksekutif Argo Muria dan Argo Sindoro Rute Semarang-Jakarta. Populasi penelitian ini adalah rata-rata penumpang Argo Muria dan Argo Sindoro per har, sedangkan jumlah sampel 160 orang diambil menggunakan rumus slovin dan teknik simple random sampling. Metode pengumpulan data menggunakan angket, wawancara dan dokumentasi. Metode analisis menggunakan analisis regresi Ordinary Least Square (OLS. Hasil penelitian menunjukkan bahwa pendapatan konsumen, harga tiket kereta api Argo Muria dan Argo Sindoro serta adanya tiket promo pesawat berpengaruh terhadap jumlah permintaan kereta api eksekutif Argo Muria dan Argo Sindoro. Using Ordinary Least Square (OLS this paper aims to analyze the effect of: railway passenger’s income, railway fares, perception of air travel fares, railway service performance, types of trains and air promo travel tickets to the demand of executive class railway route Semarang-Jakarta. The population of this research are passenger of Argo Muria and Argo Sindoro an average each day, amount of sample are 160 people was taken by slovin formula and simple random sampling. The method of accumulating data used questionnaire, interview and documentation. The result shows that the railway passenger’s income have positive income to executive railway demand. An increase executive railway fares will result in decrease executive railway demand. The air promo travel tickets have positive effect to difference of executive class railway demand caused passenger’s decision to move in air plane or unturned by railway.

  9. Enabling Mobile Air Quality App Development with an AirNow API

    Science.gov (United States)

    Dye, T.; White, J. E.; Ludewig, S. A.; Dickerson, P.; Healy, A. N.; West, J. W.; Prince, L. A.

    2013-12-01

    The U.S. Environmental Protection Agency's (EPA) AirNow program works with over 130 participating state, local, and federal air quality agencies to obtain, quality control, and store real-time air quality observations and forecasts. From these data, the AirNow system generates thousands of maps and products each hour. Each day, information from AirNow is published online and in other media to assist the public in making health-based decisions related to air quality. However, an increasing number of people use mobile devices as their primary tool for obtaining information, and AirNow has responded to this trend by publishing an easy-to-use Web API that is useful for mobile app developers. This presentation will describe the various features of the AirNow application programming interface (API), including Representational State Transfer (REST)-type web services, file outputs, and RSS feeds. In addition, a web portal for the AirNow API will be shown, including documentation on use of the system, a query tool for configuring and running web services, and general information about the air quality data and forecasts available. Data published via the AirNow API includes corresponding Air Quality Index (AQI) levels for each pollutant. We will highlight examples of mobile apps that are using the AirNow API to provide location-based, real-time air quality information. Examples will include mobile apps developed for Minnesota ('Minnesota Air') and Washington, D.C. ('Clean Air Partners Air Quality'), and an app developed by EPA ('EPA AirNow').

  10. Alteration Summary of the 8th Edition API SPEC Q1 as Opposed to the 7th Edition%API SPEC Q1第8版相对第7版变更摘要

    Institute of Scientific and Technical Information of China (English)

    方晓东

    2009-01-01

    @@ API SPEC Q1是API标准中一项重要的技术政策性标准,通用于API的所有产品规范.API Q1第8版于2007年12月发布, 2008年6月15日生效.2008年6月15日以后对申请会标公司质量管理体系的审核,将按API Q1第8版的要求进行.

  11. Small Molecule APY606 Displays Extensive Antitumor Activity in Pancreatic Cancer via Impairing Ras-MAPK Signaling

    Science.gov (United States)

    Guo, Na; Liu, Zuojia; Zhao, Wenjing; Wang, Erkang; Wang, Jin

    2016-01-01

    Pancreatic cancer has been found with abnormal expression or mutation in Ras proteins. Oncogenic Ras activation exploits their extensive signaling reach to affect multiple cellular processes, in which the mitogen-activated protein kinase (MAPK) signaling exerts important roles in tumorigenesis. Therapies targeted Ras are thus of major benefit for pancreatic cancer. Although small molecule APY606 has been successfully picked out by virtual drug screening based on Ras target receptor, its in-depth mechanism remains to be elucidated. We herein assessed the antitumor activity of APY606 against human pancreatic cancer Capan-1 and SW1990 cell lines and explored the effect of Ras-MAPK and apoptosis-related signaling pathway on the activity of APY606. APY606 treatment resulted in a dose- and time-dependent inhibition of cancer cell viability. Additionally, APY606 exhibited strong antitumor activity, as evidenced not only by reduction in tumor cell invasion, migration and mitochondrial membrane potential but also by alteration in several apoptotic indexes. Furthermore, APY606 treatment directly inhibited Ras-GTP and the downstream activation of MAPK, which resulted in the down-regulation of anti-apoptotic protein Bcl-2, leading to the up-regulation of mitochondrial apoptosis pathway-related proteins (Bax, cytosolic Cytochrome c and Caspase 3) and of cyclin-dependent kinase 2 and Cyclin A, E. These data suggest that impairing Ras-MAPK signaling is a novel mechanism of action for APY606 during therapeutic intervention in pancreatic cancer. PMID:27223122

  12. Pim-2 activates API-5 to inhibit the apoptosis of hepatocellular carcinoma cells through NF-kappaB pathway.

    Science.gov (United States)

    Ren, Ke; Zhang, Wei; Shi, Yujun; Gong, Jianping

    2010-06-01

    Pim-2 is proved to be relevant to the tumorigenesis of hepatocellular carcinoma (HCC), but the mechanism is unclear. We studied the relationship among Pim-2, NF-kappaB and API-5. In our experiment, expression level of the three factors and phosphorylation level of API-5, as well as NF-kappaB activity, were detected in HCC tissues and the nontumorous controls. Then Pim-2 gene was transfected into nontumorous liver cells L02, and Pim-2 SiRNA was transfected into hepatoblastoma cell line HepG2. Parthenolide was added as NF-kappaB inhibitor. The same detections as above were repeated in the cells, along with the apoptosis analysis. We found the levels of Pim-2, NF-kappaB and API-5, as well as NF-kappaB activity, were significantly higher in HCC tissues. Pim-2 level was increased in L02 cells after the transfection of Pim-2 gene, but decreased in HepG2 cells after the transfection of Pim-2 SiRNA. The levels of NF-kappaB and API-5, as well as NF-kappaB activity and API-5 phosphorylation level, were in accordance with Pim-2 level, but could be reversed by Parthenolide. Cell apoptosis rates were negatively correlated with API-5 phosphorylation level. Therefore, we infer that Pim-2 could activate API-5 to inhibit the apoptosis of liver cells, and NF-kappaB is the key regulator.

  13. Variation morphogeometrics of Africanized honey bees (Apis mellifera in Brazil Variação morfogeométrica das abelhas africanizadas (Apis mellifera no Brasil

    Directory of Open Access Journals (Sweden)

    Lorena A. Nunes

    2012-09-01

    Full Text Available The morphometrics of the honey bee Apis mellifera L., 1758 has been widely studied mainly because this species has great ecological importance, high adaptation capacity, wide distribution and capacity to effectively adapt to different regions. The current study aimed to investigate the morphometric variations of wings and pollen baskets of honey bees Apis mellifera scutellata Lepeletier, 1836 from the five regions in Brazil. We used geometric morphometrics to identify the existence of patterns of variations of shape and size in Africanized honey bees in Brazil 16 years after the classic study with this species, allowing a temporal and spatial comparative analysis using new technological resources to assess morphometrical data. Samples were collected in 14 locations in Brazil, covering the five geographical regions of the country. The shape analysis and multivariate analyses of the wing allowed to observe that there is a geographical pattern among the population of Apis mellifera in Brazil. The geographical variations may be attributed to the large territorial extension of the country in addition to the differences between the bioregions.Apis mellifera L., 1758 têm sido alvo de muitos estudos morfométricos principalmente pela sua importância ecológica, pela sua grande capacidade de adaptação, sua ampla distribuição e por serem capazes de se estabelecer eficientemente em diversas regiões. O presente trabalho teve como objetivo estudar as variações da forma em asas e corbículas de operárias de Apis mellifera scutellata Lepeletier, 1836 provenientes das cinco regiões biogeográficas do Brasil utilizando análises morfogeométricas, a fim de verificar a existência de padrões de variação de forma e tamanho das abelhas africanizadas no Brasil após 16 anos do estudo clássico realizado com esta espécie, possibilitando uma análise espaço-temporal comparativa utilizando recursos tecnológicos atuais para a avaliação de dados morfom

  14. Vitellogenins are new high molecular weight components and allergens (Api m 12 and Ves v 6 of Apis mellifera and Vespula vulgaris venom.

    Directory of Open Access Journals (Sweden)

    Simon Blank

    Full Text Available BACKGROUND/OBJECTIVES: Anaphylaxis due to hymenoptera stings is one of the most severe clinical outcomes of IgE-mediated hypersensitivity reactions. Although allergic reactions to hymenoptera stings are often considered as a general model for the underlying principles of allergic disease, venom immunotherapy is still hampered by severe systemic side effects and incomplete protection. The identification and detailed characterization of all allergens of hymenoptera venoms might result in an improvement in this field and promote the detailed understanding of the allergological mechanism. Our aim was the identification and detailed immunochemical and allergological characterization of the low abundant IgE-reactive 200 kDa proteins of Apis mellifera and Vespula vulgaris venom. METHODS/PRINCIPAL FINDINGS: Tandem mass spectrometry-based sequencing of a 200 kDa venom protein yielded peptides that could be assigned to honeybee vitellogenin. The coding regions of the honeybee protein as well as of the homologue from yellow jacket venom were cloned from venom gland cDNA. The newly identified 200 kDa proteins share a sequence identity on protein level of 40% and belong to the family of vitellogenins, present in all oviparous animals, and are the first vitellogenins identified as components of venom. Both vitellogenins could be recombinantly produced as soluble proteins in insect cells and assessed for their specific IgE reactivity. The particular vitellogenins were recognized by approximately 40% of sera of venom-allergic patients even in the absence of cross-reactive carbohydrate determinants. CONCLUSION: With the vitellogenins of Apis mellifera and Vespula vulgaris venom a new homologous pair of venom allergens was identified and becomes available for future applications. Due to their allergenic properties the honeybee and the yellow jacket venom vitellogenin were designated as allergens Api m 12 and Ves v 6, respectively.

  15. OpenSearch (ECHO-ESIP) & REST API for Earth Science Data Access

    Science.gov (United States)

    Mitchell, A.; Cechini, M.; Pilone, D.

    2010-12-01

    This presentation will provide a brief technical overview of OpenSearch, the Earth Science Information Partners (ESIP) Federated Search framework, and the REST architecture; discuss NASA’s Earth Observing System (EOS) ClearingHOuse’s (ECHO) implementation lessons learned; and demonstrate the simplified usage of these technologies. SOAP, as a framework for web service communication has numerous advantages for Enterprise applications and Java/C# type programming languages. As a technical solution, SOAP has been a reliable framework on top of which many applications have been successfully developed and deployed. However, as interest grows for quick development cycles and more intriguing “mashups,” the SOAP API loses its appeal. Lightweight and simple are the vogue characteristics that are sought after. Enter the REST API architecture and OpenSearch format. Both of these items provide a new path for application development addressing some of the issues unresolved by SOAP. ECHO has made available all of its discovery, order submission, and data management services through a publicly accessible SOAP API. This interface is utilized by a variety of ECHO client and data partners to provide valuable capabilities to end users. As ECHO interacted with current and potential partners looking to develop Earth Science tools utilizing ECHO, it became apparent that the development overhead required to interact with the SOAP API was a growing barrier to entry. ECHO acknowledged the technical issues that were being uncovered by its partner community and chose to provide two new interfaces for interacting with the ECHO metadata catalog. The first interface is built upon the OpenSearch format and ESIP Federated Search framework. Leveraging these two items, a client (ECHO-ESIP) was developed with a focus on simplified searching and results presentation. The second interface is built upon the Representational State Transfer (REST) architecture. Leveraging the REST architecture, a

  16. Polinização de morangueiro por Apis mellifera em ambiente protegido Strawberry polinization through Apis mellifera in protected environment

    Directory of Open Access Journals (Sweden)

    Eunice Oliveira Calvete

    2010-03-01

    Full Text Available Este trabalho objetivou comparar a produtividade e a qualidade dos frutos comerciáveis no morangueiro, em ambiente protegido, utilizando a espécie de abelha Apis mellifera em relação à ausência de um agente polinizador. Foram instalados dois experimentos, utilizando-se das cultivares Camarosa, Oso Grande, Diamante e Aromas (tratamentos, no período de 05 de maio a 19 de dezembro de 2006. No primeiro experimento, não havia polinizadores (testemunha. O segundo foi polinizado pela espécie de abelha Apis mellifera. Os tratamentos (cultivares foram dispostos, em cada experimento, em um delineamento completamente casualizado, com seis repetições. Foram avaliadas características de rendimento, bem como análise físico-química dos frutos de cada cultivar. Quanto ao rendimento, a maior produção obtida foi com a cultivar Camarosa tanto na ausência quanto na presença de polinizadores (907,46 g. planta-1 e 1.054,93 g. planta-1, respectivamente, ao passo que a cultivar Oso Grande apresentou menor número de frutos deformados.This work objectified to compare the productivity and the quality of the strawberry marketable fruits in protected environment, using the species of bee Apis mellifera in relation of the absence of a polinizator agent. It was installed two experiments using the cultivates Camarosa, Oso Grande, Diamante and Aromas (treatments, in the period of May 5 th until December 19th of 2006. The first experiment did not have polinizatores agents (control. The second was polinizated by the species of bee Apis mellifera. The treatments (cultivars had been arranged, in each experiment in a randomized blocks with 6 repetitions. They were evaluated income characteristics, as well as analysis physicist-chemistry of the fruits of each cultivar. For the income, the biggest production was gotten in cultivar Camarosa, for the first and the second experiment (907,46 g. plant-1 and 1054,93 g. plant-1, respectively, in the way that the cultivate

  17. Active pharmaceutical ingredient (API) production involving continuous processes – A process system engineering (PSE)-assisted design framework

    DEFF Research Database (Denmark)

    Cervera Padrell, Albert Emili; Skovby, Tommy; Kiil, Søren

    2012-01-01

    A systematic framework is proposed for the design of continuous pharmaceutical manufacturing processes. Specifically, the design framework focuses on organic chemistry based, active pharmaceutical ingredient (API) synthetic processes, but could potentially be extended to biocatalytic and fermenta...

  18. Development of a GIS-Based Online Discussion System for Scientists with Google Earth API and Twitter

    Science.gov (United States)

    Ohtake, S.; Demura, H.; Hirata, N.; Terazono, J.

    2011-03-01

    This study has developed an online discussion system cooperating with GIS for researchers in planetary sciences. We focused on mushup approach with the existing web services; Google Earth API and Twitter.

  19. Studi Perencanaan Koordinasi Proteksi Mempertimbangkan Busur Api Pada Sistem Kelistrikan PT. Semen Indonesia Aceh Menggunakan Standar IEEE 1584-2002

    Directory of Open Access Journals (Sweden)

    Dhimas Oktavian Andryana

    2017-03-01

    Full Text Available PT. Semen Indonesia pabrik Aceh merupakan perusahaan patungan (joint venture company antara PT. Semen Indonesia (Persero bersama PT. Samana Citra Agung. Total daya listrik yang dibutuhkan sebesar 85.8 MW dengan sistem kelistrikan pada sistem tegangan rendah dan menengah. Guna menjaga kontinuitas daya listrik, diperlukan koordinasi proteksi untuk meminimalisir dampak yang ditimbulkan ketika terjadi gangguan. Salah satu dampak yang ditimbulkan adalah adanya busur api (arc flash. Namun demikian, energi yang dihasilkan oleh busur api setelah dilakukan koordinasi proteksi perlu dipertimbangkan agar tidak melampaui standard yang diizinkan. Analisa busur api dilakukan dengan menggunakan perhitungan standar IEEE 1584-2002. Setelah dilakukan beberapa analisa didapatkan bahwa beberapa daerah di PT. Semen Indonesia pabrik Aceh memiliki nilai insiden energi diatas kategori 4, sehingga diperlukan tambahan peralatan berupa rele differensial sebagai pengaman utama agar nilai insiden energi busur api bisa dikategorikan sesuai standard NFPA 70E.

  20. Surface Acidity and Solid-State Compatibility of Excipients with an Acid-Sensitive API: Case Study of Atorvastatin Calcium

    National Research Council Canada - National Science Library

    Govindarajan, Ramprakash; Landis, Margaret; Hancock, Bruno; Gatlin, Larry A; Suryanarayanan, Raj; Shalaev, Evgenyi Y

    2015-01-01

    .... The chemical stability of an API, atorvastatin calcium (AC), in mixtures with the excipients was evaluated by monitoring the appearance of an acid-induced degradant, atorvastatin lactone, under accelerated storage conditions...

  1. The indigenous honey bees of Saudi Arabia (Hymenoptera, Apidae, Apis mellifera jemenitica Ruttner): Their natural history and role in beekeeping.

    Science.gov (United States)

    Alqarni, Abdulaziz S; Hannan, Mohammed A; Owayss, Ayman A; Engel, Michael S

    2011-01-01

    Apis mellifera jemenitica Ruttner (= yemenitica auctorum: videEngel 1999) has been used in apiculture throughout the Arabian Peninsula since at least 2000 BC. Existing literature demonstrates that these populations are well adapted for the harsh extremes of the region. Populations of Apis mellifera jemenitica native to Saudi Arabia are far more heat tolerant than the standard races often imported from Europe. Central Saudi Arabia has the highest summer temperatures for the Arabian Peninsula, and it is in this region where only Apis mellifera jemenitica survives, while other subspecies fail to persist. The indigenous race of Saudi Arabia differs from other subspecies in the region in some morphological, biological, and behavioral characteristics. Further taxonomic investigation, as well as molecular studies, is needed in order to confirm whether the Saudi indigenous bee populations represent a race distinct from Apis mellifera jemenitica, or merely an ecotype of this subspecies.

  2. THE EXTENDED FINITE ELEMENT METHOD IN FATIGUE LIFE PREDICTIONS OF OIL WELL WELDED PIPES MADE OF API J55 STEEL

    National Research Council Canada - National Science Library

    Ljubica Lazic Vulicevic; Aleksandar Grbovic; Aleksandar Sedmak; Aleksandar Rajic

    2015-01-01

      This paper presents an application of the extended finite element method (XFEM) in the modeling and analysis of simultaneous cracks propagations in a seam casing pipe made of API J55 steel by high-frequency...

  3. PERLETAKAN STASIUN KERETA API DALAM TATA RUANG KOTA-KOTA DI JAWA (KHUSUSNYA JAWA TIMUR PADA MASA KOLONIAL

    Directory of Open Access Journals (Sweden)

    Handinoto Handinoto

    1999-01-01

    Full Text Available Railway Company in Indonesia started in 1860's. They were held by both government (SS- Staad Spoorwegen and private (NIS, etc. The same happened as in Europe after rev. industry, railway station's placement as new kind of building became very important in urban planning. Faster progression,in railway services in Indonesia in the begining 20 th century, that reached almost all of town in Java; caused railway station's placement, either in larger city or Kabupaten city will be importance. In the end of 19 th and 20 th century, railway transportation was one of important infrastructure.But in the second part of 20 th century, after independence, the roadway progression caused railway services become come down, so railway stations were careless. In the end of 20 th century, the dense of roadway in Java caused railway's function raise again. In general towns has been develop, so railway station placement which been though exactly in urban planning, become to make trouble for city trafic. The scoupe of this paper covered about the placement of railway station in the past, as input for development city in Java for the future. Abstract in Bahasa Indonesia : Per kereta api an di Indonesia baru dimulai pada th. 1860 an. Perusahaan kereta api ditangani oleh dua instansi yaitu oleh pihak pemerintah (seperti: S.S - Staad Spoorwegen dan pihak swasta (seperti :NIS - Nederlandsch Indische Spoorweg Maatschappij, dan sebagainya. Seperti halnya di Eropa setelah revolusi industri, perletakkan stasiun sebagai suatu jenis bangunan baru, menjadi sangat penting dalam tata ruang kota. Dengan makin majunya per kereta api an di Indonesia pada awal abad ke 20, yang hampir mencapai seluruh kota di Jawa, maka penempatan stasiun kereta api baik di kota-kota besar maupun kota Kabupaten menjadi suatu pemikiran yang penting. Pada akhir abad ke 19 dan abad ke 20, angkutan dengan kereta api, menjadi salah satu sarana yang sangat penting, baik angkutan barang maupun manusia. Tapi

  4. 环境空气中臭氧API评价探讨%Study on Air Ozone API Evaluation

    Institute of Scientific and Technical Information of China (English)

    徐建平

    2012-01-01

    Air ozone API evaluation is considered that area of influence on ozone concentration exceed ambient air quality, ozone API correction on hours on ozone concentration exceed ambient air quality and Ozone average concentration exceed ambient air quality.%环境空气中臭氧API评价应考虑臭氧超标影响范围、臭氧超标小时数和超标平均浓度对臭氧API修正.

  5. Test-retest reliability of the Advanced Psychodiagnostic Interpretation (API) scoring system for the Bender Gestalt in chronic schizophrenics.

    Science.gov (United States)

    Aucone, E J; Wagner, E E; Raphael, A J; Golden, C J; Espe-Pfeifer, P; Dornheim, L; Seldon, J; Pospisil, T; Proctor-Weber, Z; Calabria, M

    2001-09-01

    This study assesses the test-retest reliability of the revised Advanced Psychodiagnostic Interpretation (API) scoring system for the Bender Gestalt Test (BGT). The API system identifies 207 possible distortions in a BGT protocol. Test-retest reliability for 40 schizophrenic patients tested twice with a mean interval of 6.4 years (SD=3.8 years) was good, ranging from .71 to .80. Further reliability and validity studies are needed to further demonstrate the effectiveness of the system.

  6. Analysis of API2-MALT1 fusion, trisomies, and immunoglobulin VH genes in pulmonary mucosa-associated lymphoid tissue lymphoma.

    Science.gov (United States)

    Xia, Hongjing; Nakayama, Takahisa; Sakuma, Hidenori; Yamada, Seiji; Sato, Fumihiko; Takino, Hisashi; Okabe, Mitsukuni; Fujiyoshi, Yukio; Hattori, Hideo; Inagaki, Hiroshi

    2011-09-01

    Pulmonary mucosa-associated lymphoid tissue lymphoma is unique in that chronic inflammation is rare and that API2-MALT1 fusion, resulting from t(11;18)(q21;q21), occurs frequently. In this study, we examined 20 cases for API2-MALT1 fusion using the multiplex reverse-transcription polymerase chain reaction and looked for trisomy 3, trisomy 18, and abnormalities of MALT1 and IGH genes using fluorescence in situ hybridization. In addition, we analyzed VH genes by subcloning of the monoclonal polymerase chain reaction products. Of 20 cases studied, we detected gene abnormalities in 16: API2-MALT1 fusion in 9, trisomy 3 in 5, trisomy 18 in 4, MALT1 abnormality in 13, and IGH abnormality in 1. MALT1 gene abnormalities were concordant with API2-MALT1 fusion or trisomy 18. One case showed API2-MALT1 fusion and trisomy 3. On detection of API2-MALT1 fusion and trisomies, we were able to divide our cases into 3 groups, API2-MALT1 positive, trisomy positive, and no detectable gene abnormality, suggesting that tumor development had processed along different genetic pathways. All 20 cases were analyzed for VH genes. Most of the VH genes selected by the lymphomas belonged to the VH3 family, but there was no restriction to any particular VH fragment. Of interest, VH genes were unmutated in 7 cases, suggesting that T-cell-independent extrafollicular B-cell maturation may be important in the development of this lymphoma. In addition, both mutated and unmutated tumor cases were found to carry the API2-MALT1 fusion and trisomy 3. This observation suggests that these gene abnormalities may occur in microenvironments found before or outside of follicular germinal centers.

  7. OWL应用接口的比较分析%Comparative Analysis of APIs for OWL Ontology

    Institute of Scientific and Technical Information of China (English)

    熊振辉; 于娟

    2015-01-01

    The paper comparatively analyzes three types of APIs for OWL, including Jena API、Protégé API and OWL API, from aspects of characteristics, platforms which they base on, languages which they can process and OWL ontology models. It focuses on commonly-used functions of OWL API and obtains related conclusions: (1) Jena API cannot achieve all functions of OWL because it bases on RDF triple;(2) OWL API is specifically designed for OWL and it supports structural specification of OWL2 which is the latest edition of OWL;(3) current APIs for OWL ontology mostly base on Java platform, whereas APIs base on other platforms (e.g. .net plat-form) have not appeared.%比较分析了Jena API、Protégé API、OWL API这三种OWL应用接口(API)的特点、所基于的平台、可处理的语言以及描述OWL本体的模型,重点介绍了OWL API的常用基本功能,得出了相关结论:(1)Jena API基于RDF三元组的特点使其不能实现OWL语言的全部功能;(2)OWL API针对OWL语言设计,且支持最新的OWL2语言的结构规范;(3)目前这些API都是基于Java平台的,对于其它平台(如.net平台),尚未见有成熟的API出现。

  8. Evaluation of different glycoforms of honeybee venom major allergen phospholipase A2 (Api m 1) produced in insect cells

    DEFF Research Database (Denmark)

    Blank, Simon; Seismann, Henning; Plum, Melanie;

    2011-01-01

    Allergic reactions to hymenoptera stings are one of the major reasons for IgE-mediated anaphylaxis. However, proper diagnosis using venom extracts is severely affected by molecular cross-reactivity. In this study recombinant honeybee venom major allergen phospholipase A2 (Api m 1) was produced......-derived recombinant Api m 1 with defined CCD phenotypes might provide further insights into hymenoptera venom IgE reactivities and contribute to an improved diagnosis of hymenoptera venom allergy....

  9. The API2-MALT1 fusion exploits TNFR pathway-associated RIP1 ubiquitination to promote oncogenic NF-κB signaling.

    Science.gov (United States)

    Rosebeck, S; Rehman, A O; Apel, I J; Kohrt, D; Appert, A; O'Donnell, M A; Ting, A T; Du, M-Q; Baens, M; Lucas, P C; McAllister-Lucas, L M

    2014-05-08

    The API2-MALT1 fusion oncoprotein is created by the recurrent t(11;18)(q21;q21) chromosomal translocation in mucosa-associated lymphoid tissue (MALT) lymphoma. We identified receptor interacting protein-1 (RIP1) as a novel API2-MALT1-associated protein, and demonstrate that RIP1 is required for API2-MALT1 to stimulate canonical nuclear factor kappa B (NF-κB). API2-MALT1 promotes ubiquitination of RIP1 at lysine (K) 377, which is necessary for full NF-κB activation. Furthermore, we found that TNF receptor-associated factor 2 (TRAF2) recruitment is required for API2-MALT1 to induce RIP1 ubiquitination, NF-κB activation and cellular transformation. Although both TRAF2 and RIP1 interact with the API2 moiety of API2-MALT1, this moiety alone is insufficient to induce RIP1 ubiquitination or activate NF-κB, indicating that API2-MALT1-dependent RIP1 ubiquitination represents a gain of function requiring the concerted actions of both the API2 and MALT1 moieties of the fusion. Intriguingly, constitutive RIP1 ubiquitination was recently demonstrated in several solid tumors, and now our study implicates RIP1 ubiquitination as a critical component of API2-MALT1-dependent lymphomagenesis.

  10. Preparation and physicochemical characterization of matrix pellets containing APIs with different solubility via extrusion process.

    Science.gov (United States)

    Hegyesi, Diána; Thommes, Markus; Kleinebudde, Peter; Sovány, Tamás; Kása, Péter; Kelemen, András; Pintye-Hódi, Klára; Regdon, Géza

    2017-03-01

    In this study, a multiparticulate matrix system was produced, containing two different active pharmaceutical ingredients (APIs): enalapril-maleate and hydrochlorothiazide. The critical control points of the process were investigated by means of factorial design. Beside the generally used microcrystalline cellulose, ethylcellulose was used as matrix former to achieve modified drug release ensured by diffusion. The matrix pellets were made by extrusion-spheronization using a twin-screw extruder. Some pellet properties (aspect ratio, 10% interval fraction, hardness, deformation process) were determined. The aim of our study was to investigate how the two different APIs with different solubility and particle size influence the process. The amount of the granulation liquid plays a key role in the pellet shaping. A higher liquid feed rate is preferred in the pelletization process.

  11. TogoWS: integrated SOAP and REST APIs for interoperable bioinformatics Web services.

    Science.gov (United States)

    Katayama, Toshiaki; Nakao, Mitsuteru; Takagi, Toshihisa

    2010-07-01

    Web services have become widely used in bioinformatics analysis, but there exist incompatibilities in interfaces and data types, which prevent users from making full use of a combination of these services. Therefore, we have developed the TogoWS service to provide an integrated interface with advanced features. In the TogoWS REST (REpresentative State Transfer) API (application programming interface), we introduce a unified access method for major database resources through intuitive URIs that can be used to search, retrieve, parse and convert the database entries. The TogoWS SOAP API resolves compatibility issues found on the server and client-side SOAP implementations. The TogoWS service is freely available at: http://togows.dbcls.jp/.

  12. Developing a Digital Video Library with the YouTube Data API

    Directory of Open Access Journals (Sweden)

    Jason Clark

    2013-04-01

    Full Text Available MSU Library has created a digital video library using the YouTube API to power our local library channel. It is a complete search and browse application with item level views, microdata, a caching and optimization routine, and a file backup routine. The article will discuss applying the YouTube API as a database application layer: workflow efficiencies, metadata procedures and local backup and optimization procedures. Code samples in PHP, .htaccess examples, and shell commands used in developing the application and routines will be explained at length. And finally, a complete prototype application will be released on github for other libraries to get started using the lessons learned. A live version of the application is here: http://www.lib.montana.edu/channel/. The real benefit of this method is the low overhead for smaller shops and the ability to scale production and distribution of digital video.

  13. PERILAKU RAMBAT API PREMIXED PENYALAAN BAWAH CAMPURAN GAS METANA-UDARA INHIBITOR NITROGEN (N2

    Directory of Open Access Journals (Sweden)

    Djoko Wahyudi

    2013-12-01

    Full Text Available Komposisi gas metana dalam kandungan biogas salah satu dengan menurunkan gas nitrogennya. Nitrogen dalam campuran bahan bakar gas merupakan inhibitor yang efektif. Misalkan pengaruh nitrogen pada kecepatan pembakaran dari gas metana-udara mengalami penurunan. Seberapa besar pengaruh kadar nitrogen jika ditinjau dari perilaku rambat api, maka perlu adanya suatu pengamatan atau penelitian. Dalam penelitian ini variabel bebasnya adalah prosentase campuran Nitrogen 10%-50% dan titik penyalaan dari bawah. Prosentase nitrogen diambil dari prosentase gas metana, misal 10% nitrogen maka 90% gas metana. Campuran udara dan CH4 tetap stoikiometri (9.5:1. Untuk mendapatkan nitrogen pada campuran stoikiometri dengan menghitung jumlah volume dari helle shaw cell, kemudian menentukan prosentase nitrogen yang masuk ke ruang bakar, sesuai variasi prosentase nitrogen. Pola rambat api yang dibentuk dari campuran gas metana-udara dan nitrogen menunjukkan perubahan yang beda-beda dan berbentuk parabola yang mendatar dan akhirnya pecah menjadi beberapa parabola yang kecil-kecil.

  14. Opening the Door: A First Look at the OCLC WorldCat Metadata API

    Directory of Open Access Journals (Sweden)

    Terry Reese

    2014-07-01

    Full Text Available Libraries have long relied on OCLC’s WorldCat database as a way to cooperatively share bibliographic data and declare library holdings to support interlibrary loan services. As curator, OCLC has traditionally mediated all interactions with the WorldCat database through their various cataloging clients to control access to the information. As more and more libraries look for new ways to interact with their data and streamline metadata operations and workflows, these clients have become bottlenecks and an inhibitor of library innovation. To address some of these concerns, in early 2013 OCLC announced the release of a set of application programming interfaces (APIs supporting read and write access to the WorldCat database. These APIs offer libraries their first opportunity to develop new services and workflows that directly interact with the WorldCat database, and provide opportunities for catalogers to begin redefining how they work with OCLC and their data.

  15. Fast Synchronization In IVR Using REST API For HTML5 And AJAX

    Directory of Open Access Journals (Sweden)

    Sandeep Kailuke,

    2014-09-01

    Full Text Available Need a web service is just a web page meant for a computer to request and process. IVR system uses REST API for data access while calling. When in call process user want to access data, server need to validate it and while validation data accessing must be synchronize with mysql server. For large data accessing API is essential. This method is for HTML5 and AJAX for fast data synchronization. REST can support any media type, but XML is expected to be the most popular transport for structured information. In IVR System problems with fast data access because before uses HTML4. Proposed work is for HTML5 with AJAX implementation.

  16. Temporal genetic structure of a drone congregation area of the giant Asian honeybee (Apis dorsata).

    Science.gov (United States)

    Kraus, F B; Koeniger, N; Tingek, S; Moritz, R F A

    2005-12-01

    The giant Asian honeybee (Apis dorsata), like all other members of the genus Apis, has a complex mating system in which the queens and males (drones) mate at spatially defined drone congregation areas (DCAs). Here, we studied the temporal genetic structure of a DCA of A. dorsata over an 8-day time window by the genotyping of sampled drones with microsatellite markers. Analysis of the genotypic data revealed a significant genetic differentiation between 3 sampling days and indicated that the DCA was used by at least two subpopulations at all days in varying proportions. The estimation of the number of colonies which used the DCA ranged between 20 and 40 colonies per subpopulation, depending on the estimation procedure and population. The overall effective population size was estimated as high as N (e)=140. The DCA seems to counteract known tendencies of A. dorsata for inbreeding within colony aggregations by facilitating gene flow among subpopulations and increasing the effective population size.

  17. Bauschinger effect on API 5L B and X56 steel plates under repeating bending load

    Science.gov (United States)

    Chandra, Icho Y.; Korda, Akhmad A.

    2017-01-01

    During steel pipe fabrication, hot rolled coil steel will undergo coiling and uncoiling process, where the steel plate is bent repeatedly. When cyclic loading is imposed on steel, tensile and compressive stress will occur in it resulting in softening caused by Bauschinger effect. This research is focused on Bauschinger effect and cyclic loading during coiling and uncoiling process on API 5L B and API 5L X56 steel. Both types of steel were given repeated bend loading with variation in loading cycle and the curvature radius. The steel's response was then observed by using tensile testing, microhardness testing, and microstructure observation. A decrease in yield strength is observed during lower cycles and on smaller radii. After higher loading cycle, the yield strength of the steel was increased. Microhardness testing also reported similar results on the subsurface part of the steel where loading is at its highest.

  18. Comparative proteomic analysis reveals mite (Varroa destructor) resistance-related proteins in Eastern honeybees (Apis cerana).

    Science.gov (United States)

    Ji, T; Shen, F; Liu, Z; Yin, L; Shen, J; Liang, Q; Luo, Y X

    2015-08-21

    The mite (Varroa destructor) has become the greatest threat to apiculture worldwide. As the original host of the mite, Apis cerana can effectively resist the mite. An increased understanding of the resistance mechanisms of Eastern honeybees against V. destructor may help researchers to protect other species against these parasites. In this study, the proteomes of 4 Apis cerana colonies were analyzed using an isobaric tag for relative and absolute quantitation technology. We determined the differences in gene and protein expression between susceptible and resistant colonies that were either unchallenged or challenged by V. destructor. The results showed that a total of 1532 proteins were identified. Gene Ontology enrichment analysis suggested that the transcription factors and basic metabolic and respiratory processes were efficient and feasible factors controlling this resistance, and 12 differentially expressed proteins were identified in Venn analysis. The results were validated by quantitative polymerase chain reaction. This study may provide insight into the genetic mechanisms underlying the resistance of honeybee to mites.

  19. Genetic reincarnation of workers as queens in the Eastern honeybee Apis cerana.

    Science.gov (United States)

    Holmes, M J; Tan, K; Wang, Z; Oldroyd, B P; Beekman, M

    2015-01-01

    Thelytokous parthenogenesis, or the asexual production of female offspring, is rare in the animal kingdom, but relatively common in social Hymenoptera. However, in honeybees, it is only known to be ubiquitous in one subspecies of Apis mellifera, the Cape honeybee, A. mellifera capensis. Here we report the appearance of queen cells in two colonies of the Eastern honeybee Apis cerana that no longer contained a queen or queen-produced brood to rear queens from. A combination of microsatellite genotyping and the timing of the appearance of these individuals excluded the possibility that they had been laid by the original queen. Based on the genotypes of these individuals, thelytokous production by natal workers is the most parsimonious explanation for their existence. Thus, we present the first example of thelytoky in a honeybee outside A. mellifera. We discuss the evolutionary and ecological consequences of thelytoky in A. cerana, in particular the role thelytoky may play in the recent invasions by populations of this species.

  20. Beginning the 21st century with advanced Automatic Parts Identification (API)

    Science.gov (United States)

    Schramm, Fred; Roxby, Don

    1994-01-01

    Under the direction of the NASA George C. Marshall Space Flight Center, Huntsville, Alabama, the development and commercialization of an advanced Automated Parts Indentification (API) system is being undertaken by Rockwell International Corporation. The new API system is based on a variable sized, machine-readable, two-dimensioanl matrix symbol that can be applied directly onto most metallic and nonmetallic materials using safe, permanent marking methods. Its checkerboard-like structure is the most space efficient of all symbologies. This high data-density symbology can be applied to products of different material sizes and geometries using application-dependent, computer-driven marking devices. The high fidelity markings produced by these devices can then be captured using a specially designed camera linked to any IBM-compatible computer. Applications of compressed symbology technology will reduce costs and improve quality, productivity, and processes in a wide variety of federal and commercial applications.

  1. Novel insights into excipient effects on the biopharmaceutics of APIs from different BCS classes: Lactose in solid oral dosage forms.

    Science.gov (United States)

    Kubbinga, Marlies; Moghani, Laura; Langguth, Peter

    2014-09-30

    Excipients encompass a wide range of properties that are of importance for the resulting drug product. Regulatory guidelines on biowaivers for immediate release formulations require an in depth understanding of the biopharmaceutic effects of excipients in order to establish bioequivalence between two different products carrying the same API based on dissolution tests alone. This paper describes a new approach in evaluating biopharmaceutic excipient effects. Actually used quantities of a model excipient, lactose, formulated in combination with APIs from different BCS classes were evaluated. The results suggest that companies use different (relative) amounts depending on the characteristics of the API. The probability of bioinequivalence due to a difference in lactose content between test and reference products was classified as low for BCS class I APIs and medium for BCS class II and III APIs, whereas a high probability was assigned to the combination of lactose and BCS class IV APIs. If repeated for other excipients, this retrospective, top-down approach may lead to a new database and more widespread applications of the biowaiver approach.

  2. csd alleles in the red dwarf honey bee (Apis florea,Hymenoptera: Apidae) show exceptionally high nucleotide diversity

    Institute of Scientific and Technical Information of China (English)

    Zhi-Yong Liu; Zi-Long Wang; Xiao-Bo Wu; Wei-Yu Yan; Zhi-Jiang Zeng

    2011-01-01

    The single locus complementary sex determination (sl-csd) gene is the primary gene determining the gender of honey bees (Apis spp.).While the csd gene has been well studied in the Western honey bee (Apis mellifera),and comparable data exist in both the Eastern honey bee (Apis cerana) and the giant honey bee (Apis dorsata),no studies have been conducted in the red dwarf honey bee,Apisflorea.In this study we cloned the genomic region 3 of the A.florea csd gene from 60 workers,and identified 12 csd alleles.Analysis showed that similar to A.mellifera,region 3 of the csd gene contains a RS domain at the N terminal,a proline-rich domain at the C terminal,and a hypervariable region in the middle.However,the A.florea csd gene possessed a much higher level of nucleotide diversity,compared to A.mellifera,A.cerana and Apis dorsata.We also show that similar to the other three Apis species,in A.florea,nonsynonymous mutations in the csd gene are selectively favored in young alleles.

  3. Dry coating of micronized API powders for improved dissolution of directly compacted tablets with high drug loading.

    Science.gov (United States)

    Han, Xi; Ghoroi, Chinmay; Davé, Rajesh

    2013-02-14

    Motivated by our recent study showing improved flow and dissolution rate of the active pharmaceutical ingredient (API) powders (20 μm) produced via simultaneous micronization and surface modification through continuous fluid energy milling (FEM) process, the performance of blends and direct compacted tablets with high drug loading is examined. Performance of 50 μm API powders dry coated without micronization is also considered for comparison. Blends of micronized, non-micronized, dry coated or uncoated API powders at 30, 60 and 70% drug loading, are examined. The results show that the blends containing dry coated API powders, even micronized ones, have excellent flowability and high bulk density compared to the blends containing uncoated API, which are required for direct compaction. As the drug loading increases, the difference between dry coated and uncoated blends is more pronounced, as seen in the proposed bulk density-FFC phase map. Dry coating led to improved tablet compactibility profiles, corresponding with the improvements in blend compressibility. The most significant advantage is in tablet dissolution where for all drug loadings, the t(80) for the tablets with dry coated APIs was well under 5 min, indicating that this approach can produce nearly instant release direct compacted tablets at high drug loadings.

  4. Efeitos de atrativos e repelentes sobre o comportamento da abelha (Apis mellifera, l. Effect of attractants and repellents on the behavior of honey bees (Apis mellipera, L.

    Directory of Open Access Journals (Sweden)

    D.T. MALERBO-SOUZA

    1998-01-01

    Full Text Available O objetivo do presente ensaio foi testar diversas substâncias e verificar sua atratividade e repelência para abelhas, Apis mellifera, L. Para isso, foram realizados testes em discos próximos às colméias e em cana picada oferecida como alimentação para gado bovino confinado. Nos discos próximos à colméia, o produto mais atrativo foi Bee-Here e o mais repelente foi o óleo de citronela. No cocho para bovinos, o repelente mais efetivo foi n-octyl-acetato.The experiment aimed to study honey bee (Apis mellifera attractants and repellents in vitro and on chopped sugar cane for bovine feeding. Tests were performed on plates located near to the hives and on bovine-hods. On plates, Bee-Here® was the most attractive and citronela oil the most repellent. On bovine-hods the most effective was n-octyl-acetate.

  5. Hydrogen sulfide corrosion of weld regions in API X52 steel; Corrosion por acido sulfhidrico de las regiones de soldadura en acero API X52

    Energy Technology Data Exchange (ETDEWEB)

    Arenas-Martinez, L.F [Universidad Autonoma de Coahuila, Coahuila (Mexico)]. E-mail: fernando.arenas@uadec.edu.mx; Garcia-Cerecero, G. [Corporacion Mexicana de Investigacion en Materiales S.A. de C.V., Saltillo, Coahuila (Mexico)]. E-mail: ggarcia@comimsa.com

    2012-10-15

    The corrosion behavior of gas metal arc welding (GMAW) regions has been studied using potentiodynamic polarization and polarization resistance (LPR) techniques. Experiments were conducted in hydrogen sulfide (H{sub 2}S)-containing brine and in H{sub 2}S-free brine. Welds were made on API 5L X52 steel. Due to differences in their microstructure, chemical composition and residual stress level, weld regions exhibited different responses under H{sub 2}S corrosion. Base metal exhibited the highest corrosion rate (CR) and the most cathodic corrosion potential. [Spanish] Se estudio el comportamiento ante la corrosion de las regiones de soldadura de un cordon realizado por arco metalico con gas (GMAW) sobre un acero grado API X52 mediante las tecnicas de polarizacion potencio dinamica y resistencia a la polarizacion (LPR). Los experimentos se realizaron utilizando salmuera con 300 ppm de acido sulfhidrico (H{sub 2}S) y salmuera libre de H{sub 2}S como electrolitos. Debido a las diferencias en su microestructura, composicion quimica y el nivel de esfuerzos residuales, las regiones de soldadura mostraron diferentes respuestas a la corrosion por H{sub 2}S. El metal base exhibio la velocidad de corrosion (VC) mas alta y el potencial de corrosion mas catodico.

  6. Sepsis and Hemocyte Loss in Honey Bees (Apis mellifera) Infected with Serratia marcescens Strain Sicaria

    OpenAIRE

    Burritt, Nancy L.; Foss, Nicole J.; Neeno-Eckwall, Eric C.; Church, James O.; Hilger, Anna M.; Hildebrand, Jacob A.; Warshauer, David M.; Perna, Nicole T.; Burritt, James B.

    2016-01-01

    Global loss of honey bee colonies is threatening the human food supply. Diverse pathogens reduce honey bee hardiness needed to sustain colonies, especially in winter. We isolated a free-living Gram negative bacillus from hemolymph of worker honey bees (Apis mellifera) found separated from winter clusters. In some hives, greater than 90% of the dying bees detached from the winter cluster were found to contain this bacterium in their hemolymph. Throughout the year, the same organism was rarely ...

  7. Galenics: studies of the toxicity and distribution of sugar substitutes on Apis mellifera

    OpenAIRE

    RADEMACHER, Eva; Fahlberg, Anja; Raddatz, Marlene; Schneider, Saskia; Voigt, Kathrin

    2013-01-01

    International audience; The aim of this study was to find a substitute to sugar water in medicinal treatments of honey bee colonies with the same properties but without being ingested by bees or being toxic to them. Tylose MH, sorbitol and glycerol were tested for their attractiveness to Apis mellifera, their application ability, toxicity via individual application and distribution in small groups respectively a small colony. Neither of the substances proved attractive or toxic. All had good ...

  8. libChEBI: an API for accessing the ChEBI database.

    Science.gov (United States)

    Swainston, Neil; Hastings, Janna; Dekker, Adriano; Muthukrishnan, Venkatesh; May, John; Steinbeck, Christoph; Mendes, Pedro

    2016-01-01

    ChEBI is a database and ontology of chemical entities of biological interest. It is widely used as a source of identifiers to facilitate unambiguous reference to chemical entities within biological models, databases, ontologies and literature. ChEBI contains a wealth of chemical data, covering over 46,500 distinct chemical entities, and related data such as chemical formula, charge, molecular mass, structure, synonyms and links to external databases. Furthermore, ChEBI is an ontology, and thus provides meaningful links between chemical entities. Unlike many other resources, ChEBI is fully human-curated, providing a reliable, non-redundant collection of chemical entities and related data. While ChEBI is supported by a web service for programmatic access and a number of download files, it does not have an API library to facilitate the use of ChEBI and its data in cheminformatics software. To provide this missing functionality, libChEBI, a comprehensive API library for accessing ChEBI data, is introduced. libChEBI is available in Java, Python and MATLAB versions from http://github.com/libChEBI, and provides full programmatic access to all data held within the ChEBI database through a simple and documented API. libChEBI is reliant upon the (automated) download and regular update of flat files that are held locally. As such, libChEBI can be embedded in both on- and off-line software applications. libChEBI allows better support of ChEBI and its data in the development of new cheminformatics software. Covering three key programming languages, it allows for the entirety of the ChEBI database to be accessed easily and quickly through a simple API. All code is open access and freely available.

  9. Kompetisi Industri Transportasi: Tinjauan Komunikasi Pemasaran Jasa PT Kereta Api Indonesia

    Directory of Open Access Journals (Sweden)

    Prima Mulyasari Agustini

    2008-06-01

    Full Text Available The development of transportation industry has removed the train business from its monopolistic business. Sooner or later, the government will open up opportunity for private parties to participate in the train business. In order to successfully anticipate this future, PT Kereta Api Indonesia (KAI needs to change its communication strategy. Integrated Service Marketing Communication (ISMC was recommended as a strategic approach covering management of service promise, management of customer expectation, customer education improvement, and management of internal marketing communication.

  10. Active pharmaceutical ingredient (api) from an estuarine fungus, Microdochium nivale (Fr.)

    Digital Repository Service at National Institute of Oceanography (India)

    Bhosale, S.H.; Patil, K.B.; Parameswaran, P.S.; Jagtap, T.G.

    of Environmental Biology circleshadowdwnSeptember 2011circleshadowdwn Active pharmaceutical ingredient (api) from an estuarine fungus, Microdochium nivale (Fr.) Author Details S.H. Bhosale Biochemical Sciences, National Chemical Laboratory, Pune - 411 008, India K...-inflammatory, Keratoconctivitis sicca (KCS) and immunosuppressive activity (Stiller and Opelez, 1991; Rahacek and De-Xiu, 1991; Laibowitz et al., 1993). Cyclosporine A is a potent immunosuppressant that has significantly contributed to the progress in organ transplantation...

  11. Use of oxalic acid to control Varroa destructor in honeybee (Apis mellifera L.) colonies

    OpenAIRE

    Akyol, Ethem; YENİNAR, Halil

    2009-01-01

    This study was carried out to determine the effects of oxalic acid (OA) on reducing Varroa mite (Varroa destructor) populations in honeybee (Apis mellifera L.) colonies in the fall. Twenty honeybee colonies, in wooden Langstroth hives, were used in this experiment. Average Varroa infestation levels (%) of the OA and control groups were 25.87% and 24.57% on adult workers before the treatments. The OA treatments were applied twice, on 3 November and 13 November 2006. Average Varroa infestation ...

  12. Phosphorus 30 CH to control Varroa population in Apis mellifera colonies

    OpenAIRE

    Moscatelli, Francesca; Pietropaoli, Marco; Brocherel, Giuseppina; Martini, Andrea; Formato, Giovanni

    2016-01-01

    Varroa destructor is considered to be the main cause of European honeybee (Apis mellifera ssp. Linnaeus 1758) colony losses. The use of homeopathic products in veterinary practices has consistently increased in the last 50 years, but limited data are available on the application of homeopathic treatments to honeybees. The aims of this study were to investigate the acaricide efficacy and tolerability for honeybees treated for 35 days with the homeopathic product Phosphorus 30 CH. Methods...

  13. The nicotinic acetylcholine receptor gene family of the honey bee, Apis mellifera

    OpenAIRE

    Jones, Andrew K.; Raymond-Delpech, Valerie; Steeve H Thany; Gauthier, Monique; Sattelle, David B.

    2006-01-01

    Nicotinic acetylcholine receptors (nAChRs) mediate fast cholinergic synaptic transmission and play roles in many cognitive processes. They are under intense research as potential targets of drugs used to treat neurodegenerative diseases and neurological disorders such as Alzheimer's disease and schizophrenia. Invertebrate nAChRs are targets of anthelmintics as well as a major group of insecticides, the neonicotinoids. The honey bee, Apis mellifera, is one of the most beneficial insects worldw...

  14. Microstructure and mechanical properties of two API steels for iron ore pipelines.

    OpenAIRE

    Godefroid,Leonardo Barbosa; Cândido,Luiz Cláudio; Toffolo,Rodrigo Vicente Bayão; Barbosa,Luiz Henrique Soares

    2014-01-01

    This research compares the mechanical behavior of two API steels (X60 and X70) used in the longest pipeline in the world for the conveyance of iron ore. Tensile tests, Charpy impact tests, CTOD tests and fatigue crack growth tests are performed at ambient temperature. Metallographic examination showed a banded microstructure consisting of polygonal ferrite and pearlite in both steels, with smaller grain size and the presence of a small quantity of bainite in the X70 steel. All the mechanical ...

  15. Protease activity of the API2-MALT1 fusion oncoprotein in MALT lymphoma development and treatment.

    Science.gov (United States)

    Rosebeck, Shaun; Lucas, Peter C; McAllister-Lucas, Linda M

    2011-05-01

    Gastric mucosa-associated lymphoid tissue (MALT) lymphoma is a prototypical cancer that occurs in the setting of chronic inflammation and an important model for understanding how deregulated NF-κB transcriptional activity contributes to malignancy. Most gastric MALT lymphomas require ongoing antigenic stimulation for continued tumor growth, and Stage I disease is usually cured by eradicating the causative microorganism, Helicobacter pylori, with antibiotics. However, in a subset of MALT lymphomas, chromosomal translocations are acquired that render the lymphoma antigen-independent. The recurrent translocation t(11;18)(q21;q21) is associated with failure to respond to antibiotic therapy and increased rate of dissemination. This translocation creates the API2-MALT1 fusion oncoprotein, which comprises the amino terminus of inhibitor of apoptosis 2 (API2 or cIAP2) fused to the carboxy terminus of MALT1. A common characteristic of chromosomal translocations in MALT lymphoma, including t(11;18), is that genes involved in the regulation of the NF-κB transcription factor are targeted by the translocations, and these genetic perturbations thereby result in deregulated, constitutive NF-κB stimulation. In the last decade, great insights into the roles of API2 and MALT1 in NF-κB signaling have been made. For example, recent pivotal studies have uncovered the long sought-after proteolytic activity of MALT1 and have demonstrated its critical involvement in the survival of certain lymphomas. Here, we review the current understanding of the role of MALT1 in normal lymphocyte function and lymphomagenesis. We then highlight our recent work that has revealed an intriguing link between the proteolytic activity of the API2-MALT1 fusion and its ability to influence lymphomagenesis by cleaving a key NF-κB regulatory protein, NF-κB-inducing kinase.

  16. Behavioral modulation of the coexistence between Apis melifera and Varroa destructor: A defense against colony collapse?

    OpenAIRE

    Santos, Joyce F.; Coelho, Flávio C.; Bliman, Pierre-Alexandre J.

    2015-01-01

    Colony Collapse Disorder has become a global problem for beekeepers and for the crops which depend on bee polination. Multiple factors are known to increase the risk of colony colapse, and the ectoparasitic mite Varroa destructor that parasitizes honey bees (Apis melifera) is among the main threats to colony health. Although this mite is unlikely to, by itself, cause the collapse of hives, it plays an important role as it is a vector for many viral diseases. Such diseases are among the likely...

  17. Implication of infectious agents and parasites in the Colony Collapse Disorder of the bee Apis mellifera

    OpenAIRE

    Giménez Bonillo, Sara

    2014-01-01

    Pòster The Apis mellifera bee is a pollinator with a very important role and it is indispensable for the growth of the productivity of some agricultural crops. In the last years there is the worry for the increasing loss of mellifera bee colonies all over the world. The CCD (Colony Collapse Disorder) is a sudden death of bee colonies and, in many cases, swarm abandonment

  18. Hydrocarbon Composition of Beeswax (Apis Mellifera) Collected from Light and Dark Coloured Combs

    OpenAIRE

    Waś Ewa; Szczęsna Teresa; Rybak-Chmielewska Helena

    2014-01-01

    The hydrocarbon composition of beeswax secreted by Apis mellifera was characterised. In the studies, analyses were made of virgin beeswax (obtained from light combs, socalled „wild-built combs“) that was collected at different dates, and beeswax obtained from dark combs („brood combs“). A qualitative analysis did not show any differences in the hydrocarbon composition of beeswax originating from light and dark coloured combs. The same hydrocarbons (n-alkanes, alkenes, and dienes) were identif...

  19. Manipulating API and AOD data to distinguish transportation of aerosol at high altitude in Penang, Malaysia

    Science.gov (United States)

    Tan, F.; Lim, H. S.; Abdullah, K.; Yoon, T. L.; Matjafri, M. Z.; Holben, B.

    2014-02-01

    Air pollution index (API) is an index commonly used in Malaysia to determine the air quality level. It is a ground truth data measurement which is unable to unambiguously quantify air quality level at higher atmosphere. On the other hand, aerosol optical depth (AOD) from AERONET data obtained using sun photometer provides reading of the air quality for a column of atmosphere from ground surface. We first determine the quantitative correlation between the API and AOD data collected in Penang, Malaysia, between January - September, 2012, using two independent methods, one based on regression analysis and the other interpolation. Our purpose is to establish a systematic numerical procedure to determine whether aerosol transported in high altitude from other location has occurred. Two independent methods for establishing the quantitative relationship between the API and AOD data were used as a way to facilitate the verification of our approach. In our method, data from southwest monsoon period (August to September) were used as "calibration dataset" to establish the quantitative correlation between the AOD and API data. The established calibrated coefficients is then used to predict the AOD of other months, which are then compared against the data actually measured. Discrepancy between the predicted and measured AOD data can then be interpreted as an indication of whether the atmosphere at high altitude is polluted by aerosol transported from other location. If the predicted AOD is much larger than that measured, back trajectory analysis was applied to identify the aerosol transported source. This procedure is very helpful to investigate the aerosol transportation and distribution patterns during monsoon and non monsoon periods.

  20. Transcriptional markers of sub-optimal nutrition in developing Apis mellifera nurse workers

    OpenAIRE

    Corby-Harris, Vanessa; Jones, Beryl M.; Walton, Alexander; Schwan, Melissa R; Kirk E Anderson

    2014-01-01

    Background Honey bees (Apis mellifera) contribute substantially to the worldwide economy and ecosystem health as pollinators. Pollen is essential to the bee’s diet, providing protein, lipids, and micronutrients. The dramatic shifts in physiology, anatomy, and behavior that accompany normal worker development are highly plastic and recent work demonstrates that development, particularly the transition from nurse to foraging roles, is greatly impacted by diet. However, the role that diet plays ...

  1. Studies of the eddy structure in the lower ionosphere by the API technique

    Science.gov (United States)

    Bakhmetieva, Nataliya V.; Grigoriev, Gennadii I.; Lapin, Victor G.

    2016-07-01

    We present a new application of the API technique to study of turbulent phenomena in the lower ionosphere. The main objective of these studies is experimental diagnostics of natural ordered eddy structures at the altitudes of the mesosphere and lower thermosphere, such as those that occur when internal gravity waves propagate in stratified flows in the atmospheric boundary layer. To this end, we considered the impact of eddy motions in the mesosphere and lower thermosphere on the relaxation time and the frequency of the signal scattered by periodic irregularities. Theoretical study of eddy structures base on experiments using SURA heating facility (56,14 N; 44,1 W). It is known, artificial periodic irregularities (APIs) are formed in the field of the powerful standing wave as a result of the interference of the incident wave and reflected from the ionosphere (Belikovich et al., Ionospheric Research by Means of Artificial Periodic Irregularities - 2002. Katlenburg-Lindau, Germany. Copernicus GmbH. 160 p.). The relaxation or decay of the periodic structure is specified by the ambipolar diffusion process. The atmospheric turbulence causes reduction of the amplitude and decay time of the API scattered signal in comparison with the diffusion time. We found a relation between the eddy period and the characteristic decay time of scattered signal, for which the synchronism of the waves scattered by a periodic structure is broken. Besides, it is shown, when the eddy structure moves by a horizontal wind exists at these heights, the frequency of the radio wave scattered by API structure will periodically increase and decrease compared with the frequency of the radiated diagnostic (probing) radio-wave. The work was supported by the Russian Science Foundation under grant No 14-12-00556.

  2. Comparison of ground based indices (API and AQI) with satellite based aerosol products.

    Science.gov (United States)

    Zheng, Sheng; Cao, Chun-Xiang; Singh, Ramesh P

    2014-08-01

    Air quality in mega cities is one of the major concerns due to serious health issues and its indirect impact to the climate. Among mega cities, Beijing city is considered as one of the densely populated cities with extremely poor air quality. The meteorological parameters (wind, surface temperature, air temperature and relative humidity) control the dynamics and dispersion of air pollution. China National Environmental Monitoring Centre (CNEMC) started air pollution index (API) as of 2000 to evaluate air quality, but over the years, it was felt that the air quality is not well represented by API. Recently, the Ministry of Environmental Protection (MEP) of the People's Republic of China (PRC) started using a new index "air quality index (AQI)" from January 2013. We have compared API and AQI with three different MODIS (MODIS - Moderate Resolution Imaging SpectroRadiometer, onboard the Terra/Aqua satellites) AOD (aerosol optical depth) products for ten months, January-October, 2013. The correlation between AQI and Aqua Deep Blue AOD was found to be reasonably good as compared with API, mainly due to inclusion of PM2.5 in the calculation of AQI. In addition, for every month, the correlation coefficient between AQI and Aqua Deep Blue AOD was found to be relatively higher in the month of February to May. According to the monthly average distribution of precipitation, temperature, and PM10, the air quality in the months of June-September was better as compared to those in the months of February-May. AQI and Aqua Deep Blue AOD show highly polluted days associated with dust event, representing true air quality of Beijing.

  3. The Changes of Gene Expression in Honeybee (Apis mellifera) Brains Associated with Ages(Behavior Biology)

    OpenAIRE

    Mayumi, Tsuchimoto; Makoto, AOKI; Mamoru, Takada; Yoshinori, Kanou; Hiromi, Sasagawa; Yasuo, Kitagawa; Tatsuhiko, Kadowaki; Department of Applied Biological Sciences School of Agricultural Sciences, Nagoya University Chikusa; Tokyo Metropolitan Institute for Neuroscience; Graduate Program for Regulation of Biological Signals Graduate School of Bioagricultural Sciences, Nagoya University Chikusa

    2004-01-01

    Honeybee (Apis mellifera) worker bees (workers) are known to perform wide variety of tasks depending on their ages. The worker's brains also show the activity and behavior-dependent chemical and structural plasticity. To test if there are any changes of gene expression associated with different ages in the worker brains, we compared the gene expression patterns between the brains of newly emerged bees and old foraging workers (foragers) by macroarray analysis. The expression of genes encoding...

  4. PEMANFAATAN TEKNOLOGI GOOGLE MAPS API UNTUK APLIKASI LAPORAN KRIMINAL BERBASIS ANDROID PADA POLRESTABES MAKASSAR

    Directory of Open Access Journals (Sweden)

    Rismayani Rismayani

    2016-12-01

    Full Text Available Polrestabes Makassar adalah institusi negara yang berada di bawah naungan kepolisian daerah Sulawesi Selatan yang memiliki tugas dan tanggung jawab untuk melayani masyarakat kota Makassar dalam proses penanganan berbagai macam permasalahan keamanan dan kriminalitas pada masyarakat kota Makassar. Adapun permasalahan pada penelitian ini adalah bagaimana masyarakat dapat melaporkan tindak kriminal yang terjadi di sekitar mereka tanpa harus datang ke kantor polisi dan bagaimana aparat dapat menerima langsung laporan kriminal dari masyarakat tanpa harus bertemu dan dapat melihat kejadian  dari foto yang dikirimkan serta dapat mengetahui lokasi kejadian tindak kriminal di wilayah kota Makassar. Tujuan dari penelitian ini adalah membuat aplikasi berbasis android dengan memanfaatkan teknologi Google Maps API untuk mengirim laporan kriminal dalah bentuk foto serta mengirimkan lokasi kejadian tindak kriminal dari masyarakat ke aparat kepolisian. Adapun metode atau teknologi yang digunakan adalah Google Maps API dan berbasis Android, google maps api adalah adalah sebuah jasa peta global virtual gratis dan online yangdisediakan oleh perusahaan Google. Google Maps yang dapat ditemukan di alamat http://maps.google.com  dan berbasis android adalah sistem operasi berbasis Linux yang dirancang untuk perangkat bergerak layar sentuh seperti telepon pintar dan komputer tablet. Hasil dari penelitian ini adalah dengan adanya aplikasi tersebut maka masyarakat dapat melaporkan tindak kriminal yang terjadi di sekitar mereka tanpa harus datang ke kantor polisi dan memudahkan para aparat kepolisian untuk melihat laporan kriminal dari masyarakat dengan melihat gambar dan lokasi kejadian kriminal.

  5. An analysis of the intrinsic cross-correlations between API and meteorological elements using DPCCA

    Science.gov (United States)

    Shen, Chen-hua; Li, Cao-ling

    2016-03-01

    In order to reveal the intrinsic cross-correlations between air pollution index (API) records and synchronously meteorological elements data, the detrended partial cross-correlation (DPCC) coefficients are analyzed using a detrended partial cross-correlation analysis (DPCCA). DPCC coefficients for different spatial locations and seasons are calculated and compared. The results show that DPCCA can uncover intrinsic cross-correlations between API and meteorological elements, and most of their interactional mechanisms can be explained. DPCC coefficients are either positive or negative, and vary with spatial locations and seasons, with consistently interactional mechanisms. More remarkable, we find that detrended cross-correlation analysis can present the cross-correlations between the fluctuations in two nonstationary time series, but this cross-correlation does not always fully reflect the interactional mechanism for the original time series. Despite this, DPCCA is recommended as a comparatively reliable method for revealing intrinsic cross-correlations between API and meteorological elements, and it can also be useful for our understanding of their interactional mechanisms.

  6. CernVM WebAPI - Controlling Virtual Machines from the Web

    Science.gov (United States)

    Charalampidis, I.; Berzano, D.; Blomer, J.; Buncic, P.; Ganis, G.; Meusel, R.; Segal, B.

    2015-12-01

    Lately, there is a trend in scientific projects to look for computing resources in the volunteering community. In addition, to reduce the development effort required to port the scientific software stack to all the known platforms, the use of Virtual Machines (VMs)u is becoming increasingly popular. Unfortunately their use further complicates the software installation and operation, restricting the volunteer audience to sufficiently expert people. CernVM WebAPI is a software solution addressing this specific case in a way that opens wide new application opportunities. It offers a very simple API for setting-up, controlling and interfacing with a VM instance in the users computer, while in the same time offloading the user from all the burden of downloading, installing and configuring the hypervisor. WebAPI comes with a lightweight javascript library that guides the user through the application installation process. Malicious usage is prohibited by offering a per-domain PKI validation mechanism. In this contribution we will overview this new technology, discuss its security features and examine some test cases where it is already in use.

  7. A comparative study of relational learning capacity in honeybees (Apis mellifera and stingless bees (Melipona rufiventris.

    Directory of Open Access Journals (Sweden)

    Antonio Mauricio Moreno

    Full Text Available BACKGROUND: Learning of arbitrary relations is the capacity to acquire knowledge about associations between events or stimuli that do not share any similarities, and use this knowledge to make behavioural choices. This capacity is well documented in humans and vertebrates, and there is some evidence it exists in the honeybee (Apis mellifera. However, little is known about whether the ability for relational learning extends to other invertebrates, although many insects have been shown to possess excellent learning capacities in spite of their small brains. METHODOLOGY/PRINCIPAL FINDINGS: Using a symbolic matching-to-sample procedure, we show that the honeybee Apis mellifera rapidly learns arbitrary relations between colours and patterns, reaching 68.2% correct choice for pattern-colour relations and 73.3% for colour-pattern relations. However, Apis mellifera does not transfer this knowledge to the symmetrical relations when the stimulus order is reversed. A second bee species, the stingless bee Melipona rufiventris from Brazil, seems unable to learn the same arbitrary relations between colours and patterns, although it exhibits excellent discrimination learning. CONCLUSIONS/SIGNIFICANCE: Our results confirm that the capacity for learning arbitrary relations is not limited to vertebrates, but even insects with small brains can perform this learning task. Interestingly, it seems to be a species-specific ability. The disparity in relational learning performance between the two bee species we tested may be linked to their specific foraging and recruitment strategies, which evolved in adaptation to different environments.

  8. Apis - a Digital Inventory of Archaeological Heritage Based on Remote Sensing Data

    Science.gov (United States)

    Doneus, M.; Forwagner, U.; Liem, J.; Sevara, C.

    2017-08-01

    Heritage managers are in need of dynamic spatial inventories of archaeological and cultural heritage that provide them with multipurpose tools to interactively understand information about archaeological heritage within its landscape context. Specifically, linking site information with the respective non-invasive prospection data is of increasing importance as it allows for the assessment of inherent uncertainties related to the use and interpretation of remote sensing data by the educated and knowledgeable heritage manager. APIS, the archaeological prospection information system of the Aerial Archive of the University of Vienna, is specifically designed to meet these needs. It provides storage and easy access to all data concerning aerial photographs and archaeological sites through a single GIS-based application. Furthermore, APIS has been developed in an open source environment, which allows it to be freely distributed and modified. This combination in one single open source system facilitates an easy workflow for data management, interpretation, storage, and retrieval. APIS and a sample dataset will be released free of charge under creative commons license in near future.

  9. Super-Atmospheric Pressure Ion Sources: Application and Coupling to API Mass Spectrometer.

    Science.gov (United States)

    Chen, Lee Chuin; Rahman, Md Matiur; Hiraoka, Kenzo

    2014-01-01

    Pressurizing the ionization source to gas pressure greater than atmospheric pressure is a new tactic aimed at further improving the performance of atmospheric pressure ionization (API) sources. In principle, all API sources, such as ESI, APCI and AP-MALDI, can be operated at pressure higher than 1 atm if suitable vacuum interface is available. The gas pressure in the ion source can have different role for different ionization. For example, in the case of ESI, stable electrospray could be sustained for high surface tension liquid (e.g., pure water) under super-atmospheric pressure, owing to the absence of electric discharge. Even for nanoESI, which is known to work well with aqueous solution, its stability and sensitivity were found to be enhanced, particularly in the negative mode when the ion source was pressurized. For the gas phase ionization like APCI, measurement of gaseous compound also showed an increase in ion intensity with the ion source pressure until an optimum pressure at around 4-5 atm. The enhancement was due to the increased collision frequency among reactant ion and analyte that promoted the ion/molecule reaction and a higher intake rate of gas to the mass spectrometer. Because the design of vacuum interface for API instrument is based on the upstream pressure of 1 atm, some coupling aspects need to be considered when connecting the high pressure ion source to the mass spectrometer. Several coupling strategies are discussed in this paper.

  10. A Sensor Observation Service Extension for the GeoServices REST API

    Science.gov (United States)

    Bröring, A.; Sankaran, S.; Jirka, S.; Wytzisk, A.

    2012-04-01

    This presentation demonstrates an extension for the GeoServices REST API implemented on the ArcGIS server platform to provide near real time environmental data. The software has been developed by 52° North in context of a project with the European Environment Agency (EEA). The EEA collects huge amounts of environmental data from various agencies of the different EU member states and needs to redistribute them to decision makers as well as the general public. The key element of EEA's strategy to distribute these data is the compliancy to open standards. Relevant standards are developed and governed by the Open Geospatial Consortium (OGC); on the one hand the GeoServices REST API, currently making its way through the standardization process, and on the other hand the Sensor Observation Service (SOS), a web service interface specialized for the retrieval of sensor observations. In this work, we have combined these two standards. Therefore, we have extended the GeoServices REST API to support the provision of sensor observations, by resembling the functionality of the SOS 2.0 interface. The defined extension for the GeoServices REST API offers a simple request and response encoding of the SOS 2.0. It is aligned with the abstract service model of the SOS 2.0 specification, but provides a new implementation of this standard which complies to the GeoServices REST API. The SOS extension allows querying of observations, metadata about sensors, as well as descriptions of features observed by the sensors. These data sets are made available as resources. Either all available resource instances can be queried or the resources can be filtered with powerful query operations. The software is implemented as a so-called Server Object Extension, or short SOE, for ArcGIS Server 10.1. This presentation will demonstrate the SOE deployed for air quality observations measured from a network of over 1.500 stations all across Europe. In the coming weeks, the SOS Extension will be further

  11. In-Depth N-Glycosylation Reveals Species-Specific Modifications and Functions of the Royal Jelly Protein from Western (Apis mellifera) and Eastern Honeybees (Apis cerana).

    Science.gov (United States)

    Feng, Mao; Fang, Yu; Han, Bin; Xu, Xiang; Fan, Pei; Hao, Yue; Qi, Yuping; Hu, Han; Huo, Xinmei; Meng, Lifeng; Wu, Bin; Li, Jianke

    2015-12-04

    Royal jelly (RJ), secreted by honeybee workers, plays diverse roles as nutrients and defense agents for honeybee biology and human health. Despite being reported to be glycoproteins, the glycosylation characterization and functionality of RJ proteins in different honeybee species are largely unknown. An in-depth N-glycoproteome analysis and functional assay of RJ produced by Apis mellifera lingustica (Aml) and Apis cerana cerana (Acc) were conducted. RJ produced by Aml yielded 80 nonredundant N-glycoproteins carrying 190 glycosites, of which 23 novel proteins harboring 35 glycosites were identified. For Acc, all 43 proteins glycosylated at 138 glycosites were reported for the first time. Proteins with distinct N-glycoproteomic characteristics in terms of glycoprotein species, number of N-glycosylated sites, glycosylation motif, abundance level of glycoproteins, and N-glycosites were observed in this two RJ samples. The fact that the low inhibitory efficiency of N-glycosylated major royal jelly protein 2 (MRJP2) against Paenibacillus larvae (P. larvae) and the absence of antibacterial related glycosylated apidaecin, hymenoptaecin, and peritrophic matrix in the Aml RJ compared to Acc reveal the mechanism for why the Aml larvae are susceptible to P. larvae, the causative agent of a fatal brood disease (American foulbrood, AFB). The observed antihypertension activity of N-glycosylated MRJP1 in two RJ samples and a stronger activity found in Acc than in Aml reveal that specific RJ protein and modification are potentially useful for the treatment of hypertensive disease for humans. Our data gain novel understanding that the western and eastern bees have evolved species-specific strategies of glycosylation to fine-tune protein activity for optimizing molecular function as nutrients and immune agents for the good of honeybee and influence on the health promoting activity for human as well. This serves as a valuable resource for the targeted probing of the biological

  12. Avaliação da soldagem multipasse de chapas espessas de aços inoxidáveis lean duplex UNS S32304 soldadas pelos processos SMAW, GMAW e FCAW: parte 1: propriedades mecânicas Evaluation of multipass welding of thick lean duplex stainless steel UNS S32304 plates welded by SMAW, GMAW and FCAW: part 1: Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Ronaldo Cardoso Junior

    2012-12-01

    Full Text Available Os aços inoxidáveis duplex (AID vêm se apresentando como uma excelente alternativa para aplicações em que alta resistência à corrosão e alta resistência mecânica são requeridas. Contudo, os AID, incluindo os aços inoxidáveis lean duplex, apresentam soldabilidade inferior em relação aos aços inoxidáveis austeníticos. Nesse sentido, esse trabalho tem como objetivo a avaliação da soldagem multipasse de chapas 22 mm de espessura da liga inoxidável lean duplex UNS S32304, utilizando-se os processo SMAW, GMAW e FCAW e consumíveis com dois tipos de composição química, 22%Cr9%Ni3%Mo e 23%Cr7%Ni, totalizando seis experimentos. Foram empregados chanfros em V com 60º e suporte cerâmico para soldagem do passe de raiz, sendo que o aporte térmico foi mantido praticamente constante em 1,6 kJ.mm-1. Determinou-se os tempos de soldagem e a seqüência de passes, objetivando uma análise de produtividade, em seguida as juntas soldadas foram submetidas à END por raios x. Foram extraídos corpos de prova para ensaios de tração, dobramento, Charpy a -30 ºC e microdureza. A produtividade dos processos semi-automáticos se mostrou pelo menos 63 % maior que a do processo SMAW, enquanto o processo FCAW se mostrou de 6 a 18% mais rápido que o GMAW. Foram encontradas descontinuidades (porosidade consideradas aceitáveis segundo ASME B31.3 em alguns dos experimentos, que não influenciaram negativamente os resultados mecânicos, os quais se apresentaram acima requerimento do metal de base e especificado por normas de fabricação.The duplex stainless steels (DSS's have been placed as an excellent alternative for applications where high corrosion resistance and high mechanical strength are required. However, DSS's, including the lean duplex, present lower weldability than the austenitic stainless steels. Thus, this study aims to evaluate the multipass welding of 22 mm plates of lean duplex stainless steel alloy UNS S32304, using the process

  13. Estudo dos efeitos da restrição na microestrutura, microdureza e tenacidade em juntas soldadas em aço inoxidável duplex Study of restriction effects on mMicrostructure, microhardness and toughness in welded joints of duplex stainless steel

    Directory of Open Access Journals (Sweden)

    Everton Barbosa Nunes

    2011-06-01

    Full Text Available Os aços inoxidáveis duplex (AID apresentam em sua microestrutura ferrita e austenita, de modo a aliar boas propriedades mecânicas e resistência à corrosão. Estes materiais possuem grande aplicação na indústria petroquímica, sendo o UNS S31803 um dos mais conhecidos. Existem poucos trabalhos referentes ao estudo da influência da restrição na soldagem da junta na formação de Widmanstätten. Logo, este trabalho tem como objetivo analisar a influência da restrição no balanceamento de fases, na morfologia da austenita, na microdureza e na tenacidade da Zona Afetada pelo Calor (ZAC e da Zona Fundida (ZF. Foram realizadas soldagens em juntas tipo V utilizando eletrodo revestido AWS E2209-17com dois níveis de energia: 15 kJ/cm e 20 kJ/cm, com e sem restrição. De maneira geral, houve maior quantidade de ferrita nos passes de acabamento em relação aos passes de enchimento e de raiz. Foram observadas maiores quantidades de Widmanstätten nas condições soldadas com restrição. A ZAC apresentou uma microestrutura mais grosseira nos passes de acabamento. No entanto, não foram observadas diferenças significativas nas microestruturas quando comparadas as condições com e sem restrição. As condições que apresentaram maior quantidade de Widmanstätten obtiveram menores níveis de microdureza. Não foram observadas diferenças na energia absorvida na ZAC e ZF.Duplex stainless steels present ferrite and austenite in their microstructure in order to join good mechanical properties and corrosion resistance. These materials are very used in petrochemical industry, being the DSS UNS S31803 one of the most commercially known. There were not much published literature to study the influence of the precipitation of Widmanstätten austenite in joins with some restriction. This work has as objective to analyze the influence of the restriction in the phase balance of austenite and ferrite, in the morphology of the austenite, in the

  14. Effects of Microsatellite Genetic Polymorphisms of Apis mellifera ligustica on Nutritional Crossbreed between Apis cerana cerana and Apis mellifera ligustica%中蜂与意蜂营养杂交对意蜂微卫星遗传多态性的影响

    Institute of Scientific and Technical Information of China (English)

    何旭江; 汪志平; 秦秋红; 吴小波; 陈利华

    2011-01-01

    In this paper,we breed hybridizing queen of the Jiangshan honey bee No. 2 and French Apis mellifera ligustica through the technology of artificially feeding royal jelly of Apis cerana cerana, and then the genetic polymorphisms of microsatellite of the workers were measured. The workers were from the Jiangshan honey bee No. 2 colonies, French Apis mellifera ligustica colonies, local Apis cerana cerana colonies, the 1 hybridizing offspring as well as the 4 consecutive hybridizing offspring of nutritional crossbreeding French Apis. merllifera. L queen and the Jiangshan honey bee No. 2 drone colonies. The results showed that the genetic distance of parents and hybridizing offspring was varied, and the unique DNA bands of Apis cerana cerana and Apis melli fera ligustica were shifted.%通过人工添加中华蜜蜂王浆技术来培育江山2号与法国意蜂的杂交蜂王,并测定江山2号、法国意蜂、中华蜜蜂、营养杂交子1代和子4代工蜂的微卫星遗传多态性.结果表明,经过营养杂交,亲本蜜蜂与营养杂交子代的遗传距离发生明显的变化,中华蜜蜂和意大利蜜蜂的特有DNA条带发生了转移.说明通过蜂种之间的营养杂交可以改变其微卫星多态性.

  15. JUPITER: Joint Universal Parameter IdenTification and Evaluation of Reliability - An Application Programming Interface (API) for Model Analysis

    Science.gov (United States)

    Banta, Edward R.; Poeter, Eileen P.; Doherty, John E.; Hill, Mary C.

    2006-01-01

    The Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER API) improves the computer programming resources available to those developing applications (computer programs) for model analysis. The JUPITER API consists of eleven Fortran-90 modules that provide for encapsulation of data and operations on that data. Each module contains one or more entities: data, data types, subroutines, functions, and generic interfaces. The modules do not constitute computer programs themselves; instead, they are used to construct computer programs. Such computer programs are called applications of the API. The API provides common modeling operations for use by a variety of computer applications. The models being analyzed are referred to here as process models, and may, for example, represent the physics, chemistry, and(or) biology of a field or laboratory system. Process models commonly are constructed using published models such as MODFLOW (Harbaugh et al., 2000; Harbaugh, 2005), MT3DMS (Zheng and Wang, 1996), HSPF (Bicknell et al., 1997), PRMS (Leavesley and Stannard, 1995), and many others. The process model may be accessed by a JUPITER API application as an external program, or it may be implemented as a subroutine within a JUPITER API application . In either case, execution of the model takes place in a framework designed by the application programmer. This framework can be designed to take advantage of any parallel processing capabilities possessed by the process model, as well as the parallel-processing capabilities of the JUPITER API. Model analyses for which the JUPITER API could be useful include, for example: * Compare model results to observed values to determine how well the model reproduces system processes and characteristics. * Use sensitivity analysis to determine the information provided by observations to parameters and predictions of interest. * Determine the additional data needed to improve selected

  16. Loop-mediated isothermal amplification (LAMP) assays for rapid detection and differentiation of Nosema apis and N. ceranae in honeybees.

    Science.gov (United States)

    Ptaszyńska, Aneta A; Borsuk, Grzegorz; Woźniakowski, Grzegorz; Gnat, Sebastian; Małek, Wanda

    2014-08-01

    Nosemosis is a contagious disease of honeybees (Apis mellifera) manifested by increased winter mortality, poor spring build-up and even the total extinction of infected bee colonies. In this paper, loop-mediated isothermal amplifications (LAMP) were used for the first time to identify and differentiate N. apis and N. ceranae, the causative agents of nosemosis. LAMP assays were performed at a constant temperature of 60 °C using two sets of six species-specific primers, recognising eight distinct fragments of 16S rDNA gene and GspSSD polymerase with strand displacement activity. The optimal time for LAMP and its Nosema species sensitivity and specificity were assessed. LAMP only required 30 min for robust identification of the amplicons. Ten-fold serial dilutions of total DNA isolated from bees infected with microsporidia were used to determine the detection limit of N. apis and N. ceranae DNAs by LAMP and standard PCR assays. LAMP appeared to be 10(3) -fold more sensitive than a standard PCR in detecting N. apis and N. ceranae. LAMP methods developed by us are highly Nosema species specific and allow to identify and differentiate N. apis and N. ceranae.

  17. Fast assessment of the surface distribution of API and excipients in tablets using NIR-hyperspectral imaging.

    Science.gov (United States)

    Franch-Lage, Felicidad; Amigo, José Manuel; Skibsted, Erik; Maspoch, Santiago; Coello, Jordi

    2011-06-15

    The inclusion of hyperspectral imaging systems in the manufacturing and development of pharmaceutical products is allowing a successful improvement in the quality control of solid dosage forms. The correct distribution not only of active pharmaceutical ingredient (API) but also of the rest of excipients is essential to assure the correct behavior of the tablet when ingested. This is especially relevant in tablets with low content of potent APIs, in which the prescribed intake dosage frequently corresponds to half-a-tablet. Therefore, the aim of this work is to study the surface distribution of the compounds in tablets with low API content. The proposed procedure includes the scanning of the tablet surface using near infrared hyperspectral spectroscopy in association with multivariate curve resolution (MCR) techniques to obtain selective pictures for each individual compound and to allow the fast assessment of their distribution in the measured surface. As an example, a set of commercial Lorazepam tablets (approximately 1% mass fraction of API, and four excipients) were analyzed. The results obtained show the capacity of the proposed methodology as an expedite approach to evaluate the uniformity of the contents between and within tablets. A method to estimate the homogeneity distribution of API in the two halves of the tablet is also proposed.

  18. Surface acidity and solid-state compatibility of excipients with an acid-sensitive API: case study of atorvastatin calcium.

    Science.gov (United States)

    Govindarajan, Ramprakash; Landis, Margaret; Hancock, Bruno; Gatlin, Larry A; Suryanarayanan, Raj; Shalaev, Evgenyi Y

    2015-04-01

    The objectives of this study were to measure the apparent surface acidity of common excipients and to correlate the acidity with the chemical stability of an acid-sensitive active pharmaceutical ingredient (API) in binary API-excipient powder mixtures. The acidity of 26 solid excipients was determined by two methods, (i) by measuring the pH of their suspensions or solutions and (ii) the pH equivalent (pHeq) measured via ionization of probe molecules deposited on the surface of the excipients. The chemical stability of an API, atorvastatin calcium (AC), in mixtures with the excipients was evaluated by monitoring the appearance of an acid-induced degradant, atorvastatin lactone, under accelerated storage conditions. The extent of lactone formation in AC-excipient mixtures was presented as a function of either solution/suspension pH or pHeq. No lactone formation was observed in mixtures with excipients having pHeq > 6, while the lactone levels were pronounced (> 0.6% after 6 weeks at 50°C/20% RH) with excipients exhibiting pHeq 6, 3-6, and API, were identified based on pHeq measurements. The incompatibility prediction was confirmed in the chemical stability tests using AC as an example of an acid-sensitive API.

  19. The novel Akt inhibitor API-1 induces c-FLIP degradation and synergizes with TRAIL to augment apoptosis independent of Akt inhibition.

    Science.gov (United States)

    Li, Bo; Ren, Hui; Yue, Ping; Chen, Mingwei; Khuri, Fadlo R; Sun, Shi-Yong

    2012-04-01

    API-1 (pyrido[2,3-d]pyrimidines) is a novel small-molecule inhibitor of Akt, which acts by binding to Akt and preventing its membrane translocation and has promising preclinical antitumor activity. In this study, we reveal a novel function of API-1 in regulation of cellular FLICE-inhibitory protein (c-FLIP) levels and TRAIL-induced apoptosis, independent of Akt inhibition. API-1 effectively induced apoptosis in tested cancer cell lines including activation of caspase-8 and caspase-9. It reduced the levels of c-FLIP without increasing the expression of death receptor 4 (DR4) or DR5. Accordingly, it synergized with TRAIL to induce apoptosis. Enforced expression of ectopic c-FLIP did not attenuate API-1-induced apoptosis but inhibited its ability to enhance TRAIL-induced apoptosis. These data indicate that downregulation of c-FLIP mediates enhancement of TRAIL-induced apoptosis by API-1 but is not sufficient for API-1-induced apoptosis. API-1-induced reduction of c-FLIP could be blocked by the proteasome inhibitor MG132. Moreover, API-1 increased c-FLIP ubiquitination and decreased c-FLIP stability. These data together suggest that API-1 downregulates c-FLIP by facilitating its ubiquitination and proteasome-mediated degradation. Because other Akt inhibitors including API-2 and MK2206 had minimal effects on reducing c-FLIP and enhancement of TRAIL-induced apoptosis, it is likely that API-1 reduces c-FLIP and enhances TRAIL-induced apoptosis independent of its Akt-inhibitory activity.

  20. Drug Leads Agents from Methanol Extract of Nigerian Bee (Apis mellifera Propolis

    Directory of Open Access Journals (Sweden)

    Bashir Lawal

    2016-03-01

    Full Text Available ABSTRACT Background: Propolis is a Bee (Apis mellifera product of plant origin with varied chemical composition depending on the ecology of the botanical origin. It has been reported in literatures to possess various therapeutic effects both traditionally, clinical trial and animal study. Objectives In the present study bioactive principle in methanol extract of Nigerian bee (Apis mellifera propolis was determined GC-MS study. Methods The methanol extract of Nigerian bee (Apis mellifera propolis was characterized for its chemical composition by preliminary phytochemicals and GC and ndash;MS using standard procedures and methods. Results: Phytochemical screening revealed the presence of flavonoids, saponins, alkaloids, tannins, cardiac glycosides, anthraquinones phlobatannins and steroids while GC and ndash;MS chromatogram revealed nineteen peaks representing sixty (60 different chemical compounds. The first compounds identified with less retention time (13.33s were Methyl tetradecanoate, Tridecanoic acid, methyl ester, Decanoic acid, methyl ester while Squalene, All-trans-Squalene, 2,6,10-Dodecatrien-1-ol, 3,7,11-trimethyl-, (E,E- and Farnesol isomer a took longest retention time (23.647s to identify. Methyl 14-methylpentadecanoate, Hexadecanoic acid methyl ester, Methyl isoheptadecanoateand Methyl tridecanoate were the most concentrated constituent as revealed by there peak height (26.01% while eicosanoic acid was the least concentrated (Peak height 0.81% constituent of Nigerian bee propolis. Conclusion: The presence of these chemical principles is an indication that methanol extract of Nigeria bee propolis, if properly screened could yield a drug of pharmaceutical importance [J Intercult Ethnopharmacol 2016; 5(1.000: 43-48

  1. Honey bee Apis mellifera parasites in the absence of Nosema ceranae fungi and Varroa destructor mites.

    Science.gov (United States)

    Shutler, Dave; Head, Krista; Burgher-MacLellan, Karen L; Colwell, Megan J; Levitt, Abby L; Ostiguy, Nancy; Williams, Geoffrey R

    2014-01-01

    Few areas of the world have western honey bee (Apis mellifera) colonies that are free of invasive parasites Nosema ceranae (fungi) and Varroa destructor (mites). Particularly detrimental is V. destructor; in addition to feeding on host haemolymph, these mites are important vectors of several viruses that are further implicated as contributors to honey bee mortality around the world. Thus, the biogeography and attendant consequences of viral communities in the absence of V. destructor are of significant interest. The island of Newfoundland, Province of Newfoundland and Labrador, Canada, is free of V. destructor; the absence of N. ceranae has not been confirmed. Of 55 Newfoundland colonies inspected visually for their strength and six signs of disease, only K-wing had prevalence above 5% (40/55 colonies = 72.7%). Similar to an earlier study, screenings again confirmed the absence of V. destructor, small hive beetles Aethina tumida (Murray), tracheal mites Acarapis woodi (Rennie), and Tropilaelaps spp. ectoparasitic mites. Of a subset of 23 colonies screened molecularly for viruses, none had Israeli acute paralysis virus, Kashmir bee virus, or sacbrood virus. Sixteen of 23 colonies (70.0%) were positive for black queen cell virus, and 21 (91.3%) had some evidence for deformed wing virus. No N. ceranae was detected in molecular screens of 55 colonies, although it is possible extremely low intensity infections exist; the more familiar N. apis was found in 53 colonies (96.4%). Under these conditions, K-wing was associated (positively) with colony strength; however, viruses and N. apis were not. Furthermore, black queen cell virus was positively and negatively associated with K-wing and deformed wing virus, respectively. Newfoundland honey bee colonies are thus free of several invasive parasites that plague operations in other parts of the world, and they provide a unique research arena to study independent pathology of the parasites that are present.

  2. multiplierz: an extensible API based desktop environment for proteomics data analysis

    Directory of Open Access Journals (Sweden)

    Webber James T

    2009-10-01

    Full Text Available Abstract Background Efficient analysis of results from mass spectrometry-based proteomics experiments requires access to disparate data types, including native mass spectrometry files, output from algorithms that assign peptide sequence to MS/MS spectra, and annotation for proteins and pathways from various database sources. Moreover, proteomics technologies and experimental methods are not yet standardized; hence a high degree of flexibility is necessary for efficient support of high- and low-throughput data analytic tasks. Development of a desktop environment that is sufficiently robust for deployment in data analytic pipelines, and simultaneously supports customization for programmers and non-programmers alike, has proven to be a significant challenge. Results We describe multiplierz, a flexible and open-source desktop environment for comprehensive proteomics data analysis. We use this framework to expose a prototype version of our recently proposed common API (mzAPI designed for direct access to proprietary mass spectrometry files. In addition to routine data analytic tasks, multiplierz supports generation of information rich, portable spreadsheet-based reports. Moreover, multiplierz is designed around a "zero infrastructure" philosophy, meaning that it can be deployed by end users with little or no system administration support. Finally, access to multiplierz functionality is provided via high-level Python scripts, resulting in a fully extensible data analytic environment for rapid development of custom algorithms and deployment of high-throughput data pipelines. Conclusion Collectively, mzAPI and multiplierz facilitate a wide range of data analysis tasks, spanning technology development to biological annotation, for mass spectrometry-based proteomics research.

  3. Honey bee Apis mellifera parasites in the absence of Nosema ceranae fungi and Varroa destructor mites.

    Directory of Open Access Journals (Sweden)

    Dave Shutler

    Full Text Available Few areas of the world have western honey bee (Apis mellifera colonies that are free of invasive parasites Nosema ceranae (fungi and Varroa destructor (mites. Particularly detrimental is V. destructor; in addition to feeding on host haemolymph, these mites are important vectors of several viruses that are further implicated as contributors to honey bee mortality around the world. Thus, the biogeography and attendant consequences of viral communities in the absence of V. destructor are of significant interest. The island of Newfoundland, Province of Newfoundland and Labrador, Canada, is free of V. destructor; the absence of N. ceranae has not been confirmed. Of 55 Newfoundland colonies inspected visually for their strength and six signs of disease, only K-wing had prevalence above 5% (40/55 colonies = 72.7%. Similar to an earlier study, screenings again confirmed the absence of V. destructor, small hive beetles Aethina tumida (Murray, tracheal mites Acarapis woodi (Rennie, and Tropilaelaps spp. ectoparasitic mites. Of a subset of 23 colonies screened molecularly for viruses, none had Israeli acute paralysis virus, Kashmir bee virus, or sacbrood virus. Sixteen of 23 colonies (70.0% were positive for black queen cell virus, and 21 (91.3% had some evidence for deformed wing virus. No N. ceranae was detected in molecular screens of 55 colonies, although it is possible extremely low intensity infections exist; the more familiar N. apis was found in 53 colonies (96.4%. Under these conditions, K-wing was associated (positively with colony strength; however, viruses and N. apis were not. Furthermore, black queen cell virus was positively and negatively associated with K-wing and deformed wing virus, respectively. Newfoundland honey bee colonies are thus free of several invasive parasites that plague operations in other parts of the world, and they provide a unique research arena to study independent pathology of the parasites that are present.

  4. Accessing the SEED Genome Databases via Web Services API: Tools for Programmers

    Directory of Open Access Journals (Sweden)

    Vonstein Veronika

    2010-06-01

    Full Text Available Abstract Background The SEED integrates many publicly available genome sequences into a single resource. The database contains accurate and up-to-date annotations based on the subsystems concept that leverages clustering between genomes and other clues to accurately and efficiently annotate microbial genomes. The backend is used as the foundation for many genome annotation tools, such as the Rapid Annotation using Subsystems Technology (RAST server for whole genome annotation, the metagenomics RAST server for random community genome annotations, and the annotation clearinghouse for exchanging annotations from different resources. In addition to a web user interface, the SEED also provides Web services based API for programmatic access to the data in the SEED, allowing the development of third-party tools and mash-ups. Results The currently exposed Web services encompass over forty different methods for accessing data related to microbial genome annotations. The Web services provide comprehensive access to the database back end, allowing any programmer access to the most consistent and accurate genome annotations available. The Web services are deployed using a platform independent service-oriented approach that allows the user to choose the most suitable programming platform for their application. Example code demonstrate that Web services can be used to access the SEED using common bioinformatics programming languages such as Perl, Python, and Java. Conclusions We present a novel approach to access the SEED database. Using Web services, a robust API for access to genomics data is provided, without requiring large volume downloads all at once. The API ensures timely access to the most current datasets available, including the new genomes as soon as they come online.

  5. Sensor Observation Service API for Providing Gridded Climate Data to Agricultural Applications

    Directory of Open Access Journals (Sweden)

    Rassarin Chinnachodteeranun

    2016-08-01

    Full Text Available We developed a mechanism for seamlessly providing weather data and long-term historical climate data from a gridded data source through an international standard web API, which was the Sensor Observation Service (SOS defined by the Open Geospatial Consortium (OGC. The National Agriculture and Food Research Organization (NARO Japan has been providing gridded climate data consisting of nine daily meteorological variables, which are average, minimum, maximum of air temperature, relative humidity, sunshine duration, solar radiant exposure, downward longwave radiation, precipitation and wind speed for 35 years covering Japan. The gridded data structure is quite useful for spatial analysis, such as developing crop suitability maps and monitoring regional crop development. Individual farmers, however, make decisions using historical climate information and forecasts for an incoming cropping season of their farms. In this regard, climate data at a point-based structure are convenient for application development to support farmers’ decisions. Through the proposed mechanism in this paper, the agricultural applications and analysis can request point-based climate data from a gridded data source through the standard API with no need to deal with the complicated hierarchical data structure of the gridded climate data source. Clients can easily obtain data and metadata by only accessing the service endpoint. The mechanism also provides several web bindings and data encodings for the clients’ convenience. Caching, including the pre-caching mechanism, was developed and evaluated to secure an effective response time. The mechanism enhances the accessibility and usability of the gridded weather data source, as well as SOS API for agricultural applications.

  6. Social encapsulation of beetle parasites by Cape honeybee colonies (Apis mellifera capensis Esch.)

    Science.gov (United States)

    Neumann, P.; Pirk, C. W. W.; Hepburn, H. R.; Solbrig, A. J.; Ratnieks, F. L. W.; Elzen, P. J.; Baxter, J. R.

    2001-05-01

    Worker honeybees (Apis mellifera capensis) encapsulate the small hive beetle (Aethina tumida), a nest parasite, in propolis (tree resin collected by the bees). The encapsulation process lasts 1-4 days and the bees have a sophisticated guarding strategy for limiting the escape of beetles during encapsulation. Some encapsulated beetles died (4.9%) and a few escaped (1.6%). Encapsulation has probably evolved because the small hive beetle cannot easily be killed by the bees due to its hard exoskeleton and defensive behaviour.

  7. Investigations of corrosion films formed on API-X52 pipeline steel in acid sour media

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Espejel, A. [Instituto Politecnico Nacional, Departamento de Ingenieria Metalurgica, IPN-ESIQIE, UPALM Ed. 7, Zacatenco 07738, Mexico, D.F. (Mexico); Dominguez-Crespo, M.A. [Instituto Politecnico Nacional, CICATA-Unidad Altamira-Tamaulipas, km 14.5, Carretera Tampico-Puerto Industrial Altamira, 89600 Altamira, Tamps (Mexico); Cabrera-Sierra, R. [Instituto Politecnico Nacional, Departamento de Ingenieria Quimica Industrial, IPN-ESIQIE, UPALM Ed. 7, Zacatenco 07738, Mexico, D.F. (Mexico); Rodriguez-Meneses, C. [Instituto Politecnico Nacional, Departamento de Ingenieria Metalurgica, IPN-ESIQIE, UPALM Ed. 7, Zacatenco 07738, Mexico, D.F. (Mexico); Arce-Estrada, E.M., E-mail: earce@ipn.m [Instituto Politecnico Nacional, Departamento de Ingenieria Metalurgica, IPN-ESIQIE, UPALM Ed. 7, Zacatenco 07738, Mexico, D.F. (Mexico)

    2010-07-15

    Corrosion films formed by voltammetry using different switching potentials and by immersion on API-X52 pipeline steel in simulated acid sour media (NACE ID182) have been characterized using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Linear Polarization and Electrochemical Impedance Spectroscopy (EIS) techniques. XRD and EDS analysis showed that the films are mainly composed of sulphide compounds (mackinawite, troilite, marcasite and pyrite) as well as iron oxides, as steel damage increases. Across SEM micrographs the corrosion films formed by potentiodynamic and immersion tests are very similar, covering most of the steel. Polarization and EIS results corroborate poor behavior against corrosion.

  8. Behavioral studies of learning in the Africanized honey bee (Apis mellifera L.).

    Science.gov (United States)

    Abramson, Charles I; Aquino, Italo S

    2002-01-01

    Experiments on basic classical conditioning phenomena in adult and young Africanized honey bees (Apis mellifera L.) are described. Phenomena include conditioning to various stimuli, extinction (both unpaired and CS only), conditioned inhibition, color and odor discrimination. In addition to work on basic phenomena, experiments on practical applications of conditioning methodology are illustrated with studies demonstrating the effects of insecticides on learning and the reaction of bees to consumer products. Electron microscope photos are presented of Africanized workers, drones, and queen bees. Possible sub-species differences between Africanized and European bees are discussed.

  9. MORPHOMETRIC DIFFERENCES BETWEEN HONEY BEES (Apis mellifera carpatica POPULATIONS FROM TRANSYLVANIAN AREA

    Directory of Open Access Journals (Sweden)

    L. AL. MĂRGHITAS

    2013-12-01

    Full Text Available The result of the long evolutionary process formed, by natural selection, variable races and ecotypes which are biological and ecological differentiated. The Romanian, Apis mellifera carpatica is the most adapted and the most efficient species at the local conditions. Morphometric measurements were the major criteria for classification described by Ruttner (1988 and are the basis of our study. In this way 8 morphometric characters of honeybees from Transylvanian region were measured. The data obtained show that the honeybees’ ecotype genes are mixed due to the migratory beekeeping.

  10. Comparing the LibraryThing, OCLC, and Open Library ISBN APIs

    Directory of Open Access Journals (Sweden)

    David Fiander

    2013-07-01

    Full Text Available LibraryThing, OCLC, and the Open Library project all provide ISBN services that take an ISBN and return information about related works for that ISBN. This article compares the license terms, quality of the data returned, documentation available, and details of the APIs for the three products. The article focuses on ease of use for developers, restrictions on types of use (and assumptions about types of use built into the license or terms of use, and cost of the services.

  11. zorder-lib: Library API for Z-Order Memory Layout

    Energy Technology Data Exchange (ETDEWEB)

    Nowell, Lucy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bethel, Edward W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-04-01

    This document describes the motivation for, elements of, and use of the zorder-lib, a library API that implements organization of and access to data in memory using either a-order (also known as "row-major" order) or z-order memory layouts. The primary motivation for this work is to improve the performance of many types of data- intensive codes by increasing both spatial and temporal locality of memory accesses. The basic idea is that the cost associated with accessing a datum is less when it is nearby in either space or time.

  12. Physicochemical composition of Apis mellifera honey samples from São Paulo State, Brazil

    Directory of Open Access Journals (Sweden)

    Luís Carlos Marchini

    2007-01-01

    Full Text Available This research, developed with Apis mellifera honey samples from producers of São Paulo State, Brazil, has the objective of verifying how eucalyptus, wild flower, and orange honey samples would be clustered, based on physicochemical characteristics. All the orange honey samples and some wild flower ones formed distinct groups, thus confirming that the floral source interferes with honey characteristics. Eucalyptus and some of the wild flower honey samples were clustered together because of the great floral source variation in the latter ones. The characteristics that influence sample clustering are acidity and electric conductivity on the X axis, and total sugars and pH on the Y axis.

  13. Data synchronisation and cost reduction using API in customer relationship management

    Directory of Open Access Journals (Sweden)

    Tomić Željko

    2016-01-01

    Full Text Available Research has shown that 51% of all ERP implementations involve some kind of problems in business operations during the 'go live' phase. Despite all the efforts to increase efficiency and improve business processes, many organizations come to a conclusion that once they move to the new ERP system they are not able to perform some of the basic business processes (both in the data migration phase and operational procedures, such as issuing goods from the warehouse. The ERP implementations are too often accompanied by technical and organizational issues that may cause problems in the functioning of a business system. As organizational issues are more frequently the cause of the problem, it is crucial to accurately perform the business processes analysis phase, as well as the final testing. Based on the analysis of the ERP (Enterprise Resource Planning, CRM (Customer Relationship Management and SCM (Supply Chain Management e-business models of the largest producers of software applications, the bottlenecks and shortcomings typical of the implementation of these models were identified in a select sample of clients and it has been established that there are certain inconsistencies and programme problems between the company information system (IS and the implemented ERP/CRM or SCM models. The identified problems served as the basis for designing and programming an application programming interface (API aimed at addressing certain application needs of the companies, i.e. the inadequate synchronization of databases and other IT resources. The API has been designed and programmed with a view to resolving the problems with inconsistencies and synchronization and reducing business operations costs. It has been tested as a pilot application on ISs of selected companies that apply the ERP/CRM business support systems. This work describes the ERP/CRM database synchronization process and tests the quality of the API solution based on a programmed web survey, i

  14. Calculus of evaporation losses in oil products in fixed and floating roof tanks after API examples

    Energy Technology Data Exchange (ETDEWEB)

    Barus, D.

    1971-06-01

    From vapor pressure diagrams for products between 1 and 20 psi Reid vapor pressure and for crude oil, the author calculates the evaporation losses through daily breathing, due to temperature fluctuations and through variations in liquid level due to filling and emptying the reservoir, both for fixed roof and for floating roof tanks. The necessary tables, graphs, and nomograms are given. It is concluded that floating roof tanks have a much lower rate of loss through evaporation than fixed roof tanks. The data are based on API publications.

  15. Hydrolases in the hypopharyngeal glands of workers of Scaptotrigona postica and Apis mellifera (Hymenoptera, Apinae).

    Science.gov (United States)

    Costa, Rosiléia A C; da Cruz-Landim, Carminda

    2005-12-30

    Hydrolytic enzymes from hypopharyngeal gland extracts of newly emerged, nurse and foraging workers of two eusocial bees, Scaptotrigona postica, a native Brazilian stingless bee, and the Africanized honey bee (Apis mellifera) in Brazil, were compared. The hypopharyngeal gland is rich in enzymes in both species. Fifteen different enzymes were found in the extracts, with only a few quantitative differences between the species. Some of the enzymes present in the extracts may have intracellular functions, while others seem to be digestive enzymes. Scaptotrigona postica, had lower beta-glucosidase and higher lipase esterase activities than A. mellifera. The differences may be due to different feeding habits and behavioral peculiarities of the two species.

  16. Population genomics and landscape genetics of the Iberian honey bee (Apis mellifera iberiensis)

    OpenAIRE

    Chávez Galarza, Julio César

    2016-01-01

    Tese de Doutoramento em Biologia Molecular e Ambiental - Especialidade em Evolução, Biodiversidade e Ecologia The goal of this study was to disentangle the complex variation patterns of the Iberian honey bee ( Apis mellifera iberiensis) hybrid zone using the highly polymorphic tRNAleu-cox2 mitochondrial region and nuclear genome-wide Single Nucleotide Polymorphisms (SNPs). Initially, a maternal analysis was performed using a PCR-RFLP marker, known as the DraI test, in the tRNAleu-...

  17. Application and API for Real-time Visualization of Ground-motions and Tsunami

    Science.gov (United States)

    Aoi, S.; Kunugi, T.; Suzuki, W.; Kubo, T.; Nakamura, H.; Azuma, H.; Fujiwara, H.

    2015-12-01

    Due to the recent progress of seismograph and communication environment, real-time and continuous ground-motion observation becomes technically and economically feasible. K-NET and KiK-net, which are nationwide strong motion networks operated by NIED, cover all Japan by about 1750 stations in total. More than half of the stations transmit the ground-motion indexes and/or waveform data in every second. Traditionally, strong-motion data were recorded by event-triggering based instruments with non-continues telephone line which is connected only after an earthquake. Though the data from such networks mainly contribute to preparations for future earthquakes, huge amount of real-time data from dense network are expected to directly contribute to the mitigation of ongoing earthquake disasters through, e.g., automatic shutdown plants and helping decision-making for initial response. By generating the distribution map of these indexes and uploading them to the website, we implemented the real-time ground motion monitoring system, Kyoshin (strong-motion in Japanese) monitor. This web service (www.kyoshin.bosai.go.jp) started in 2008 and anyone can grasp the current ground motions of Japan. Though this service provides only ground-motion map in GIF format, to take full advantage of real-time strong-motion data to mitigate the ongoing disasters, digital data are important. We have developed a WebAPI to provide real-time data and related information such as ground motions (5 km-mesh) and arrival times estimated from EEW (earthquake early warning). All response data from this WebAPI are in JSON format and are easy to parse. We also developed Kyoshin monitor application for smartphone, 'Kmoni view' using the API. In this application, ground motions estimated from EEW are overlapped on the map with the observed one-second-interval indexes. The application can playback previous earthquakes for demonstration or disaster drill. In mobile environment, data traffic and battery are

  18. 2个芹菜品种泛变应原Api g 4基因的克隆与分析%Cloning and analysis of panallergen Api g 4 gene from two cultivars of Apium graveolens

    Institute of Scientific and Technical Information of China (English)

    李梦瑶; 王枫; 侯喜林; 蒋倩; 马静; 熊爱生

    2013-01-01

    从芹菜(Apium graveolens Linn.)品种‘津南实芹’(‘Jinnanshiqin’)和‘美国西芹’(‘Meiguoxiqin’)中分别克隆获得泛变应原基因Api g 4;2个品种的Api g4基因均包含1个长度为405 bp的开放阅读框,二者间有3个核苷酸位点的差异.2个品种的Api g4基因均能编码134个氨基酸,但二者编码的氨基酸序列有2个位点的差异.多重比对以及进化树分析结果均表明:2个芹菜品种Api g 4基因编码的氨基酸序列与其他植物的泛变应原氨基酸序列同源性较高,氨基酸序列高度保守;与同科植物欧芹[Petroselinum crispum (Miller) Nyman ex A.W.Hill]和胡萝卜(Daucus carota Linn.)的泛变应原氨基酸序列的同源性均达到90%以上,在进化树上也归为同一支.2个品种的泛变应原Api g 4均为疏水性蛋白,具有相似的三维空间结构,均包含3个α螺旋和7个β折叠.实时定量PCR分析结果显示:Api g 4基因在‘津南实芹’和‘美国西芹’根中的表达水平均最高,在茎和茎尖分生组织中的表达水平相对较低,在叶中的表达水平很弱,且2个品种间同一组织的Api g4基因表达水平也有差异,表明Api g 4基因的表达具有明显的组织特异性.

  19. Apis mellifera capensis蜜蜂失控自复制导致的正常群落破坏%LOSE CONTROL OF SELF-REPRODUCTION OF APIS MELLIFERA CAPENSIS HONEYBEE AND THE REDUCED DEATH OF NORMAL COLONIES

    Institute of Scientific and Technical Information of China (English)

    张培培; 许田; 何阅; 何大韧

    2003-01-01

    提出对Apis mellifera capensis蜂造成Apis mellifera scutellata蜂群破坏的机制的一种新猜测,并根据logistic模型分别讨论这种猜测和已有的MARTIN猜测所导致的不同性质和规律,对2种猜测进行了比较.加强对社会成员之间信息网络的管理和监督,这也许是更加有效地防止破坏性子群体泛滥的途径.

  20. Design and Implement AN Interoperable Internet of Things Application Based on AN Extended Ogc Sensorthings Api Standard

    Science.gov (United States)

    Huang, C. Y.; Wu, C. H.

    2016-06-01

    The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring and physical mashup applications can be constructed to improve people's daily life. However, IoT devices created by different manufacturers follow different proprietary protocols and cannot communicate with each other. This heterogeneity issue causes different products to be locked in multiple closed ecosystems that we call IoT silos. In order to address this issue, a common industrial solution is the hub approach, which implements connectors to communicate with IoT devices following different protocols. However, with the growing number of proprietary protocols proposed by device manufacturers, IoT hubs need to support and maintain a lot of customized connectors. Hence, we believe the ultimate solution to address the heterogeneity issue is to follow open and interoperable standard. Among the existing IoT standards, the Open Geospatial Consortium (OGC) SensorThings API standard supports comprehensive conceptual model and query functionalities. The first version of SensorThings API mainly focuses on connecting to IoT devices and sharing sensor observations online, which is the sensing capability. Besides the sensing capability, IoT devices could also be controlled via the Internet, which is the tasking capability. While the tasking capability was not included in the first version of the SensorThings API standard, this research aims on defining the tasking capability profile and integrates with the SensorThings API standard, which we call the extended-SensorThings API in this paper. In general, this research proposes a lightweight JSON-based web service description, the "Tasking Capability Description", allowing device owners and manufacturers to describe different IoT device protocols. Through the extended- SensorThings API, users and applications can follow a coherent protocol to control Io