WorldWideScience

Sample records for apa-bcc analgesic microcapsule

  1. Biological changes of APA-BCC analgesic microcapsule in cerebrospinal fluid of patients with carcinomatous pain

    International Nuclear Information System (INIS)

    Luo Yun; Li Yanling; Xue Yilong; Guo Shulong; Gao Yuhong; Cui Xin

    2005-01-01

    To explore the changes of alginate-polylysine-alginate microcapsulated bovine adrenal medullary chromaffin cells (APA-BCC microcapsules) in morphology, survival rate and leucine- enkephalin secretion after they were transplanted into CSF of cancerpain patients, the APA- BCC microcapsules were Implanted into cavitas subarachnoidealis of cancer-pain patients by conventional lumbar puncture. After 7 or 8 days, cerebrospinal fluid was collected and the morphology of the APA-BCC microcapsule, the survival rate of cells were observed and secretory volume of leucine-enkephalin was assayed by radioimmunity method. Seven days after trans- plantation, the mean VAS decreased from 8.8 to 2.4, the survival rate of cells averagely reduced from 91.2% to 89.1%, morphology of APA-BCC microcapsules did not change obviously and secretory volume of leucine-enkephalin went up 1.65 times compared with that at pretrans- plantation. In conclusion, APA-BCC can survive, secret leucine-enkephalin and produce analgesic effect after transplanted into CSF of cancer-patients. (authors)

  2. Synthesis of Elongated Microcapsules

    Science.gov (United States)

    Li, Wenyan; Buhrow, Jerry; Calle, Luz M.

    2011-01-01

    One of the factors that influence the effectiveness of self-healing in functional materials is the amount of liquid healing agents that can be delivered to the damaged area. The use of hollow tubes or fibers and the more sophisticated micro-vascular networks has been proposed as a way to increase the amount of healing agents that can be released when damage is inflicted. Although these systems might be effective in some specific applications, they are not practical for coatings applications. One possible practical way to increase the healing efficiency is to use microcapsules with high-aspect-ratios, or elongated microcapsules. It is understood that elongated microcapsules will be more efficient because they can release more healing agent than a spherical microcapsule when a crack is initiated in the coating. Although the potential advantage of using elongated microcapsules for self healing applications is clear, it is very difficult to make elongated microcapsules from an emulsion system because spherical microcapsules are normally formed due to the interfacial tension between the dispersed phase and the continuous phase. This paper describes the two methods that have been developed by the authors to synthesize elongated microcapsules. The first method involves the use of an emulsion with intermediate stability and the second involves the application of mechanical shear conditions to the emulsion.

  3. Preparation and characterization of lamivudine microcapsules using ...

    African Journals Online (AJOL)

    Purpose: The objective of the present study was to prepare and evaluate microcapsules for the controlled release of lamivudine using various cellulose polymers. Methods: The microcapsules were prepared by the solvent evaporation method. The prepared microcapsules were characterized for the percent drug content, ...

  4. Hydrophilic-Core Microcapsules and Their Formation

    Science.gov (United States)

    Calle, Luz M. (Inventor); Li, Wenyan (Inventor); Buhrow, Jerry W. (Inventor); Jolley, Scott T. (Inventor)

    2016-01-01

    Hydrophilic-core microcapsules and methods of their formation are provided. A hydrophilic-core microcapsule may include a shell that encapsulates water with the core substance dissolved or dispersed therein. The hydrophilic-core microcapsules may be formed from an emulsion having hydrophilic-phase droplets dispersed in a hydrophobic phase, with shell-forming compound contained in the hydrophilic phase or the hydrophobic phase and the core substance contained in the hydrophilic phase. The shells of the microcapsules may be capable of being broken down in response to being contacted by an alkali, e.g., produced during corrosion, contacting the shell.

  5. Hydrophobic-Core Microcapsules and Their Formation

    Science.gov (United States)

    Calle, Luz M. (Inventor); Li, Wenyan (Inventor); Buhrow, Jerry W. (Inventor); Jolley, Scott T. (Inventor)

    2016-01-01

    Hydrophobic-core microcapsules and methods of their formation are provided. A hydrophobic-core microcapsule may include a shell that encapsulates a hydrophobic substance with a core substance, such as dye, corrosion indicator, corrosion inhibitor, and/or healing agent, dissolved or dispersed therein. The hydrophobic-core microcapsules may be formed from an emulsion having hydrophobic-phase droplets, e.g., containing the core substance and shell-forming compound, dispersed in a hydrophilic phase. The shells of the microcapsules may be capable of being broken down in response to being contacted by an alkali, e.g., produced during corrosion, contacting the shell.

  6. Fabrication of fluorescent chitosan-containing microcapsules

    Directory of Open Access Journals (Sweden)

    Zhang R.

    2013-08-01

    Full Text Available Intense emission peaks of Eu(DBM3Phen (DBM and Phen are dibenzoylmethane and 1,10-phenanthroline, respectively in the microcapsules containing molecules of quaternary ammonium chitosan (QACS and sodium alginate are observed. The microcapsules are assembled by using CaCO3 particles as template cores by the layer-by-layer (LbL technique. Observation of microcapsules by the fluorescence mode and the transmission mode in the confocal laser scanning microscopy shows that the microcapsules are intact after core decomposition. Fluorescence under ultraviolet irradiation comes directly from the Eu(DBM3Phen. Homogeneous assembly of Eu(DBM3Phen can be deduced due to the homogeneous fluorescence of the microcapsules in the fluorescence micrographs. The microcapsules show adherence to solid substrates due to large quantities of hydroxyl groups of QACS. AFM measurements of dried hollow microcapsules with only 4 bilayers of (CS/SA fabricated with Eu(DBM3Phen show the intact shell with a thickness of 3.0 nm. Regarding the biocompatible natural polysaccharides and the intense fluorescence emission, the microcapsules in this work might be of great importance in potential application in drug delivery and bioassay.

  7. Membrane emulsification to produce perfume microcapsules

    Science.gov (United States)

    Pan, Xuemiao

    Microencapsulation is an efficient technology to deliver perfume oils from consumer products onto the surface of fabrics. Microcapsules having uniform size/mechanical strength, may provide better release performance. Membrane emulsification in a dispersion cell followed by in-situ polymerization was used to prepare narrow size distribution melamine-formaldehyde (MF) microcapsules containing several types of oil-based fragrances or ingredients. Investigated in this study are the parameters impacting to the size and size distribution of the droplets and final MF microcapsules. A pilot plant-scale cross-flow membrane system was also used to produce MF microcapsules, demonstrating that the membrane emulsification process has potential to be scaled up for industrial applications. In this study, health and environmental friendly poly (methyl methacrylate) (PMMA) microcapsules with narrow size distribution were also prepared for the first time using the dispersion cell membrane emulsification system. Characterization methods previously used for thin-shell microcapsules were expanded to analyse microcapsules with thick shells. The intrinsic mechanical properties of thick shells were determined using a micromanipulation technique and finite element analysis (FEM). The microcapsules structure was also considered in the determination of the permeability and diffusivity of the perfume oils in good solvents..

  8. Photooxidation stability of microcapsules in thermochromic prints

    Directory of Open Access Journals (Sweden)

    Mirela Rozic

    2018-03-01

    Full Text Available In this paper, photochemical stability of two thermochromic prints was investigated: vegetable oil based offset and UV curing screen printing ink. The obtained preliminary results can be used for further detailed examination of prints stability. It is well known that thermochromic printing inks are very unstabile when exsposed to UV irradiance and this is why they are mainly used for applications that are not directly exposed to sunlight. The results of the study show the heterogeneous nature of photooxidative degradation of thermochromic prints, and the opposite behaviour of photooxidation can be noticed comparing examined prints. Microcapsules in the UV curable screen print by fixation with polar polymer binder can create a new products stable to photoxidation. For this reason, the areas where the microcapsules and binder are bonded together are stable. Degraded only areas where binder is not related to microcapsules. Microcapsules in offset print do not have the ability to create new stabile forms due to smaller polarity and different chemical composition of the offset oxidized binder. In the offset print, the microcapsules are the least photooxidative stable and also cause lower photooxidative stability of the binder in contact with them. Cavities are formed in the areas where microcapsules are in contact with the binder, while the areas in which the binder is not in contact with microcapsules are not degraded.

  9. Formation of Uniform Hollow Silica microcapsules

    Science.gov (United States)

    Yan, Huan; Kim, Chanjoong

    2013-03-01

    Microcapsules are small containers with diameters in the range of 0.1 - 100 μm. Mesoporous microcapsules with hollow morphologies possess unique properties such as low-density and high encapsulation capacity, while allowing controlled release by permeating substances with a specific size and chemistry. Our process is a one-step fabrication of monodisperse hollow silica capsules with a hierarchical pore structure and high size uniformity using double emulsion templates obtained by the glass-capillary microfluidic technique to encapsulate various active ingredients. These hollow silica microcapsules can be used as biomedical applications such as drug delivery and controlled release.

  10. Release rate of diazinon from microcapsule based on melamine formaldehyde

    Science.gov (United States)

    Noviana Utami C., S.; Rochmadi

    2018-04-01

    The microcapsule containing diazinon as the core material and melamine formaldehyde as the membrane material have been synthesized by in situ polymerization method. The microcapsule membrane in this research is melamine formaldehyde (MF). This research aims to study the effect of pH and temperature on the release rate of diazinon from microcapsule based on melamine formaldehyde in aqueous medium. The results showed that pH and temperature has little effect on the release rate of diazinon from microcapsule based on melamine formaldehyde. This is due to the diffusion through the microcapsule membrane is not influenced by the pH and temperature of the solution outside of microcapsule.

  11. Preparation and characterization of lamivudine microcapsules using ...

    African Journals Online (AJOL)

    Patrick Erah

    microcapsules were characterized for the percent drug content, entrapment efficiency, FTIR, DSC, scanning electron ... in which the body's immune system breaks down and is unable to .... enhanced transdermal delivery of an anti-HIV agent.

  12. Polymeric microcapsules poduction from sodium alginic acid for cell therapy

    Directory of Open Access Journals (Sweden)

    Ana Carolina Vale Campos Lisboa

    2007-12-01

    Full Text Available Development of polymeric materials has been increasingly emphasized in Biomedicine. Here, we evaluate the use of microcapsules made of Biodritin®, a biocompatible polymer compound which contains sodium alginic acid, a natural polymer extracted from algae, and Cis-Chondroitin sulfate, a glycosaminoglycan from the extracellular matrix. Gelation of this polymer into microcapsules is achieved by dropping the compound into BaCl2 or CaCl2 gelling solutions. A functional microcapsule is dependent on its permeability, mechanical stability, immunoisolation capacity and biocompatibility. The mechanical stability of Biodritin-barium and Biodritin-calcium microcapsules was investigated after rotational stress upon in vitro culture and in vivo implantation. Viability studies of encapsulated cells were also performed to assess other functional parameters of the microcapsules. When subject to rotational stress, Biodritin-barium microcapsules exhibited breaks, whereas the Biodritin-calcium microcapsules did not. Both kinds of Biodritin® microcapsules proved to be mechanically resistant in in vitro and in vivo studies. However, the Biodritin-calcium material was found to be more elastic while the Biodritin-barium microcapsules displayed a more plastic behavior. These properties seem to be determinant for viability of the encapsulated cell’s, since the Biodritin-calcium microcapsules presented more viable cells than the Biodritin-barium microcapsules.

  13. Device, method and system for preparing microcapsules

    DEFF Research Database (Denmark)

    2014-01-01

    into hydrophobic oil flow, which is horizontally maintained in the silicone tubing. The injection of polymer/cell mixture into a stream of mineral oil results in the generation of spherical droplet and in the formation of a water- in-oil emulsion due to the immiscibility of the two phases. Subsequently, the micro......-droplets in oil phase are converted into stable microcapsules by gelation in a separate chamber which is loaded with ionic cross- linking solution at physiological ionic strength and pH. The utility of the microcapsules generated by the device of present invention is virtually unlimited in the fields...

  14. Analgesic effects of melatonin

    DEFF Research Database (Denmark)

    Wilhelmsen, Michael; Amirian, Ilda; Reiter, Russel J

    2011-01-01

    studies, melatonin shows potent analgesic effects in a dose-dependent manner. In clinical studies, melatonin has been shown to have analgesic benefits in patients with chronic pain (fibromyalgia, irritable bowel syndrome, migraine). The physiologic mechanism underlying the analgesic actions of melatonin...... has not been clarified. The effects may be linked to G(i) -coupled melatonin receptors, to G(i) -coupled opioid µ-receptors or GABA-B receptors with unknown downstream changes with a consequential reduction in anxiety and pain. Also, the repeated administration of melatonin improves sleep and thereby...

  15. Analgesic effects of melatonin

    DEFF Research Database (Denmark)

    Wilhelmsen, Michael; Amirian, Ilda; Reiter, Russel J

    2011-01-01

    studies, melatonin shows potent analgesic effects in a dose-dependent manner. In clinical studies, melatonin has been shown to have analgesic benefits in patients with chronic pain (fibromyalgia, irritable bowel syndrome, migraine). The physiologic mechanism underlying the analgesic actions of melatonin...... has not been clarified. The effects may be linked to G(i) -coupled melatonin receptors, to G(i) -coupled opioid μ-receptors or GABA-B receptors with unknown downstream changes with a consequential reduction in anxiety and pain. Also, the repeated administration of melatonin improves sleep and thereby...

  16. Engineering Microvascularized 3D Tissue Using Alginate-Chitosan Microcapsules

    OpenAIRE

    Zhang, Wujie; Choi, Jung K.; He, Xiaoming

    2017-01-01

    Construction of vascularized tissues is one of the major challenges of tissue engineering. The goal of this study was to engineer 3D microvascular tissues by incorporating the HUVEC-CS cells with a collagen/alginate-chitosan (AC) microcapsule scaffold. In the presence of AC microcapsules, a 3D vascular-like network was clearly observable. The results indicated the importance of AC microcapsules in engineering microvascular tissues -- providing support and guiding alignment of HUVEC-CS cells. ...

  17. Avidin/PSS membrane microcapsules with biotin-binding activity.

    Science.gov (United States)

    Endo, Yoshihiro; Sato, Katsuhiko; Sugimoto, Kentaro; Anzai, Jun-ichi

    2011-08-15

    Polyelectrolyte microcapsules with avidin-poly(styrene sulfonate) (PSS) membrane were prepared by a layer-by-layer deposition technique. The uptake and release of biotin-labeled fluorescein (b-FITC) as well as immobilization of biotin-labeled glucose oxidase (b-GOx) to the microcapsule were studied. The polyelectrolyte microcapsules were prepared by coating the surface of calcium carbonate (CaCO(3)) microparticles with an avidin/PSS multilayer membrane, followed by dissolution of CaCO(3) core in an ethylenediaminetetraacetic acid solution. Inner and outer poly(allylamine)/PSS films were required to isolate the microcapsules, whereas microcapsules could not be formed without the support. The uptake of b-FITC into the microcapsule was highly enhanced through a strong binding of b-FITC to avidin as compared with the uptake of biotin-free FITC. Release of b-FITC from the microcapsule was accelerated upon addition of biotin due to a competitive binding of the added biotin to the binding site of avidin. Similarly, the surface of microcapsule was modified with b-GOx with retaining its catalytic activity. Copyright © 2011 Elsevier Inc. All rights reserved.

  18. On-Chip generation of polymer microcapsules through droplet coalescence

    Science.gov (United States)

    Eqbal, Md Danish; Gundabala, Venkat; Gundabala lab Team

    Alginate microbeads and microcapsules have numerous applications in drug delivery, tissue engineering and other biomedical areas due to their unique properties. Microcapsules with liquid core are of particular interest in the area of cell encapsulation. Various methods such as coacervation, emulsification, micro-nozzle, etc. exist for the generation of microbeads and microcapsules. However, these methods have several drawbacks like coagulation, non-uniformity, and polydispersity. In this work we present a method for complete on chip generation of alginate microcapsules (single core as well as double core) through the use of droplet merging technique. For this purpose, a combined Coflow and T-junction configuration is implemented in a hybrid glass-PDMS (Polydimethylsiloxane) microfluidic device. Efficient generation is achieved through precise matching of the generation rates of the coalescing drops. Through this approach, microcapsules with intact single and double (liquid) cores surrounded by alginate shell have been successfully generated and characterized.

  19. Interfacial Polycondensation Synthesis of Optically Sensitive Polyurea Microcapsule

    Directory of Open Access Journals (Sweden)

    Weidong Lai

    2014-01-01

    Full Text Available TMPTA prepolymer resin and photoinitiators of ITX/TPO had been encapsulated in core-shell structured microcapsules as optical responding ingredients based on interfacial polycondensation method, and polyurea structured microcapsule shell had been formed on the sheared O/W interface. The synthesized microcapsule had regular core-shell structure with the diameter of about 0.455 μm and shell thickness of about 40 nm. UV-visible absorption spectra indicated that the encapsulated ITX and TPO photoinitiators could efficiently absorb UV irradiation. Under exposure, the C=C bonds absorbance of the microencapsulated TMPTA decreased rapidly and then nearly unchanged during further exposure after 30 s. This implied that the optical response was achieved by C=C bond cleavage of TMPTA monomer initiated by the photoinitiator radicals, to form network polymers in microcapsules. The relative crosslinking rate was about 50%. Due to core polymer formation, the thermal phase change temperature of exposed microcapsules was narrowed and ranged from 105 to 205°C, compared with that from 125 to 260°C of unexposed microcapsules. Furthermore, the image density decrease at longer irradiation time had also verified the optical responding function of the synthesized microcapsules in macroscopic viewpoint.

  20. A novel method for the preparation of electrophoretic display microcapsules

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiao-Meng; He, Jing; Liu, Sheng-Yun [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Chen, Jian-Feng [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029 (China); Le, Yuan, E-mail: leyuan@mail.buct.edu.cn [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China)

    2014-07-01

    Highlights: • The electrophoretic display microcapsules were prepared by coaxial jet method aided by gas spray. • The positions of inner tube, liquid and gas flow rate of the process were investigated. • The size and shell thickness of the prepared microcapsules were controllable. • The prepared microcapsules had high coating ratio and exhibit reversible response to DC field. - Abstract: The narrow distributed electrophoretic display microcapsules containing electrophoretic ink were prepared using coaxial jet method aided by gas spray. Experimental results showed the size and shell thickness of the microcapsules could be controlled by adjusting flow rates of core and shell fluids as well as gas. The as-prepared white and red microcapsules, with average size of 100 and 200 μm respectively, had high coating ratio (above 90%) and exhibited reversible response to DC electric field. Compared with the approach of other microencapsulation methods, the new technique not only has a simple procedure but also provides a more effective way of size control. This novel method is expected to prepare microcapsules with potential application in the fields of electronic paper and other material science.

  1. The Research on Polymer Microcapsulation for Cell Technology

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-bin; LI Min; SONG Hong; FANG Yi; HUA Hui; CHEN Li-guo; ZHOU Wei; WANG Zheng-rong

    2004-01-01

    Microcapsulation is a technology that enwrapped the solid or liquid or some gas matter with membrane materials to form microparticles(i.e.microcapsules). The materials of microcapsule is composed of naturnal polymers or modified naturnal polymers or synthesized polymers. The water-soluble core matter can only use oil-soluble wall materials, and vice versa.Synthesized methods of polymer microcapsulesSynthesized methods with monomers as raw materialsThis kind of methods include suspension polymerization, emulsion polymerization, dispersal polymerization, precipitation polymerization,suspension condensation polymerization, dispersal condensation polymerization, deposition condensation polymerization, interface condensation polymerization, and so on.Synthesized methods with polymers as raw materialsThese methods are suspension cross-linked polymerization, coacervation phase separation,extraction with solvent evaporation, polymer deposition, polymer chelation, polymer gel,solidification of melting polymer, tray-painted ways, fluidized bed ways, and so forth.Polymer materials to synthesize microcapsules2.1. Naturnal polymer materialsThe characteristics of this kind of materials are easy to form membrane, good stability and no toxicity. The polymer materials include lipids(liposome), amyloses, proteins, plant gels, waxes, etc.2.2. Modified polymer materialsThe characteristics of these materials are little toxicity, high viscidity(viscosity), soluble salt materials. But they cannot be used in water, acidic environment and high temperature environment for a long time. The materials include all kind of derivants of celluloses.2.3. Synthesized polymer materialsThe characteristics of the materials are easy to form membrane, good stability and adjustment of membrane properties. The synthesized polymer materials include degradable polymers(PLA, PGA,PLGA, PCL, PHB, PHV, PHA, PEG, PPG and the like) and indegradable polymers(PA, PMMA,PAM, PS, PVC, PB, PE, PU, PUA, PVA and otherwise

  2. Non-Spherical Microcapsules for Increased Core Content Volume Delivery

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    The goal of this project was to advance microencapsulation from the standard spherical microcapsule to a non-spherical, high-aspect ratio (HAR), elongated microcapsule. This was to be accomplished by developing reproducible methods of synthesizing or fabricating robust, non-spherical, HAR microcapsules. An additional goal of this project was to develop the techniques to the point where scale-up of these methods could be examined. Additionally, this project investigated ways to apply the microencapsulation techniques developed as part of this project to self-healing formulations.

  3. Engineering Microvascularized 3D Tissue Using Alginate-Chitosan Microcapsules.

    Science.gov (United States)

    Zhang, Wujie; Choi, Jung K; He, Xiaoming

    2017-02-01

    Construction of vascularized tissues is one of the major challenges of tissue engineering. The goal of this study was to engineer 3D microvascular tissues by incorporating the HUVEC-CS cells with a collagen/alginate-chitosan (AC) microcapsule scaffold. In the presence of AC microcapsules, a 3D vascular-like network was clearly observable. The results indicated the importance of AC microcapsules in engineering microvascular tissues -- providing support and guiding alignment of HUVEC-CS cells. This approach provides an alternative and promising method for constructing vascularized tissues.

  4. Physical characteristics of cinnamon oil microcapsule

    Science.gov (United States)

    Hermanto, R. F.; Khasanah, L. U.; Kawiji; Atmaka, W.; Manuhara, G. J.; Utami, R.

    2016-02-01

    Cinnamon (Cinnamomum burmanii) oil products can be obtained from the bark by steam distillation. Essential oils are susceptible to high temperatures, oxidation, UV light, and humidity. Microencapsulation may change essential oils into powder, protect the sensitive core material and reduce the amount of flavor which lost during storage. In the microencapsulation, one of the important factors is the type of coating agent. The objective of this work was to characterize the cinnamon oil microcapsule. Ratio variations of coating agent maltodextrin and gum arabic were (1:0); (0:1); (1:1); (2:3). Physical characteristics such as water content, solubility, bulk density, surface oil, and microencapsulation efficiency of samples were investigated. Results showed that the ratio variations of the coating agent significantly affected the water content, bulk density, surface oil and microencapsulation efficiency but significantly affected the water solubility. Characteristics of selected microcapsule were 6.13% water content; 96.33% solubility; 0.46 g/cm3 bulk density; 2.68% surface oil; 70.68% microencapsulation efficiency and microstructures were rather good.

  5. Synthesis of microcapsules containing different extractant agents.

    Science.gov (United States)

    Alcázar, Ángela; Carmona, Manuel; Borreguero, Ana M; de Lucas, Antonio; Rodríguez, Juan F

    2015-01-01

    Mercury is one of the most toxic pollutants, with high capacity of accumulation in living organism, causing important human health problems. Therefore, the mercury removal from water is an important research goal. In a previous work, an extractant agent [di(2-ethylhexyl)phosphoric acid] was microencapsulated in poly(styrene-co-divinylbenzene) by means of suspension polymerisation using toluene as diluent. In this study, this recipe has been modified changing the toluene by heptane and extended to four additional extractants (trioctylamine, trioctylmethylammonium chloride [TOMAC], tributyl phosphate and trioctylphosphine oxide). The polluting potential of the waste liquid from the process was measured by total organic carbon and chemical oxygen demand analyses. The morphology, particle size and distribution were studied by scanning electron microscopy and low angle laser light scattering. The amount of extractant agent into the microcapsules and the microencapsulation efficiency were determined by thermogravimetric analysis and the mercury removal capacity by equilibrium studies. Microcapsules containing TOMAC demonstrated to be the best material for the mercury removal and retention.

  6. Development and In vitro Evaluation of Flurbiprofen Microcapsules ...

    African Journals Online (AJOL)

    Development and In vitro Evaluation of Flurbiprofen Microcapsules Prepared by ... (HPMC) in different drug/co-polymer ratios was used for microencapsulation of ... values from kinetic analysis showed thatrelease followed Korsmeyer-Peppas ...

  7. Development and In vitro Evaluation of Flurbiprofen Microcapsules ...

    African Journals Online (AJOL)

    2006-09-15

    Sep 15, 2006 ... Microcapsules Prepared by Modified Solvent Evaporation. Technique ... coated with a very thin wall material converting them to ... independent permeability and renders the film form by ... Nano particles formulation [4]. HPMC ...

  8. Adhesion of perfume-filled microcapsules to model fabric surfaces.

    Science.gov (United States)

    He, Yanping; Bowen, James; Andrews, James W; Liu, Min; Smets, Johan; Zhang, Zhibing

    2014-01-01

    The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabric surface. The AFM force-displacement data reveal that bridging forces resulting from the extension of cellulose chains dominate the adhesion between the microcapsule and the unmodified cellulose film, whereas electrostatic attraction helps the microcapsules adhere to the chitosan-modified cellulose film. The correlation between results obtained using these two complementary techniques suggests that the flow chamber device can be potentially used for rapid screening of the effect of chemical modification on the adhesion of microparticles to surfaces, reducing the time required to achieve an optimal formulation.

  9. [Inclusion of proteins into polyelectrolyte microcapsules by coprecipitation and adsorption].

    Science.gov (United States)

    Kochetkova, O Iu; Kazakova, L I; Moshkov, D A; Vinokurov, M G; Shabarchina, L I

    2013-01-01

    In present study microcapsules composed of synthetic (PSS and PAA) and biodegradable (DS and PAr) polyelectrolytes on calcium carbonate microparticles were obtained. The ultrastructural organization of biodegradable microcapsules was studied using transmission electron microscopy. The envelope of such capsules consisting of six polyelectrolyte layers is already well-formed, having the average thickness of 44 ± 3.0 nm, and their internal polyelectrolyte matrix is sparser compared to the synthetic microcapsules. Spectroscopy was employed to evaluate the efficiency of incorporation of FITC-labeled BSA into synthetic microcapsules by adsorption, depending on the number of polyelectrolyte layers. It was shown that the maximal amount of protein incorporated into the capsules with 6 or 7 polyelectrolyte layers (4 and 2 pg/capsule, correspondingly). As a result we conclude that, in comparison with co-precipitation, the use of adsorption allows to completely avoid the loss of protein upon encapsulation.

  10. Magnetic polymer microcapsules loaded with Nile Red fluorescent dye

    Science.gov (United States)

    Bartel, Marta; Wysocka, Barbara; Krug, Pamela; Kępińska, Daria; Kijewska, Krystyna; Blanchard, Gary J.; Kaczyńska, Katarzyna; Lubelska, Katarzyna; Wiktorska, Katarzyna; Głowala, Paulina; Wilczek, Marcin; Pisarek, Marcin; Szczytko, Jacek; Twardowski, Andrzej; Mazur, Maciej

    2018-04-01

    Fabrication of multifunctional smart vehicles for drug delivery is a fascinating challenge of multidisciplinary research at the crossroads of materials science, physics and biology. We demonstrate a prototypical microcapsule system that is capable of encapsulating hydrophobic molecules and at the same time reveals magnetic properties. The microcapsules are prepared using a templated synthesis approach where the molecules to be encapsulated (Nile Red) are present in the organic droplets that are suspended in the polymerization solution which also contains magnetic nanoparticles. The polymer (polypyrrole) grows on the surface of organic droplets encapsulating the fluorescent dye in the core of the formed microcapsule which incorporates the nanoparticles into its wall. For characterization of the resulting structures a range of complementary physicochemical methodology is used including optical and electron microscopy, magnetometry, 1H NMR and spectroscopy in the visible and X-ray spectral ranges. Moreover, the microcapsules have been examined in biological environment in in vitro and in vivo studies.

  11. Improved radiosensitive microcapsules using H2O2

    International Nuclear Information System (INIS)

    Harada, Satoshi; Ehara, Shigeru; Ishii, Keizo

    2010-01-01

    The radiation-induced releasing of the liquid-core of the microcapsules was improved using H 2 O 2 , which produced O 2 generation of H 2 O 2 after irradiation. Further, we tested whether these microcapsules enhanced the antitumor effects and decreased the adverse effects in vivo in C3He/J mice. The capsules were produced by spraying a mixture of 3.0% hyaluronic acid, 2.0% alginate, 3.0% H 2 O 2 , and 0.3 mmol of carboplatin on a mixture of 0.3 mol FeCl 2 and 0.15 mol CaCl 2 . The microcapsules were subcutaneously injected into MM46 tumors that had been inoculated in the left hind legs of C3He/J mice. The radiotherapy comprised tumor irradiation with 10 Gy or 20 Gy 60 Co. The antitumor effect of the microcapsules was tested by measuring tumor size and monitoring tumor growth. Three types of adverse effects were considered: fuzzy hair, loss of body weight, and death. The size of the capsule size was 23±2.4 μmφ and that of the liquid core, 20.2±2.2 μmφ. The injected microcapsules localized drugs around the tumor. The production of O 2 by radiation increased the release of carboplatin from the microcapsules. The antitumor effects of radiation, carboplatin, and released oxygen were synergistic. Localization of the carboplatin decreased its adverse effects. However, the H 2 O 2 caused ulceration of the skin in the treated area. The use of our microcapsules enhanced the antitumor effects and decreased the adverse effects of carboplatin. However, the skin-ulceration caused by H 2 O 2 must be considered before these microcapsules can be used clinically. (author)

  12. Color differences and perceptive properties of prints made with microcapsules

    Directory of Open Access Journals (Sweden)

    Raša Urbas

    2015-06-01

    Full Text Available The aim of the research was to establish whether addition on fragranced microcapsules influences on color values and perceptive properties of prints. For this purpose, three types of printing inks were used on two sets of the paper substrate. Color properties were measured by standard methods while perceptive properties were determined by subjective method. Research has shown that microcapsules cause small color differences while perceptive analyses gave very interesting results.

  13. An investigation into the prescribing of analgesics

    African Journals Online (AJOL)

    system drugs that analgesics comprised; proportion of patients using combination analgesics; cost of analgesics. Results. On average, 83.3% of all .... nervous system drugs were the most frequently dispensed therapeutic type, accounting on.

  14. Controlled fabrication of multi-core alginate microcapsules.

    Science.gov (United States)

    Eqbal, Md Danish; Gundabala, Venkat

    2017-12-01

    In this work, we present a robust microfluidic platform for controlled and complete on-chip generation of alginate microcapsules with single and double liquid cores. A combined Coflow and T-junction configuration implemented in a hybrid glass-PDMS (Polydimethylsiloxane) device is used for the generation of microcapsules with oil as liquid core. Frequency matching of oil-alginate double emulsion generation with that of aqueous Calcium chloride droplet generation allows for controlled merging of the two, resulting in reliable production of microcapsules. Confocal imaging of microcapsule cross-section reveals presence of intact liquid core. In the case of double core microcapsules, the two cores are well separated by alginate layer ensuring their long term stability. The current approach is expected to have advantages over existing techniques for liquid core microcapsule generation in terms of continuity of the process, control over core stability, and non-damage to cells when used for cell encapsulation applications. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Preparation and characterization of polyurethane microcapsules containing functional oil

    Energy Technology Data Exchange (ETDEWEB)

    Kim, I.H.; Seo, J.B.; Kim, Y.J. [Sungkyunkwan University, Suwon (Korea)

    2002-05-01

    Polyurethane microcapsules containing functional oil (citronella oil) were successfully prepared by conventional interfacial polymerization of tolulene 2,4-diisocyanate (TDI) and ethylene glycol (EG) and characterized by Fourier transform (FT-IR) spectroscopy, Ultraviolet spectroscopy, particle size analysis, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The effects of polymerization variables such as surfactant concentration and agitation speed, on the particle size and particle size distribution were investigated. FT-IR spectroscopic data showed that citronella oil was successfully encapsulated in the microcapsule. Thermogravimetric analysis data showed that the microcapsule was thermally stable up to 220 deg. C. The controlled release of the citronella oil present in the microcapsule core in a methanol medium was demonstrated by ultraviolet spectroscopy, showing that the amount of released citronella oil was increased with increasing time. It was observed that the amount of released citronella oil was increased with increasing stirring speed and emulsifier concentration in the microcapsule preparation step. Polyurethane microcapsules containing citronella oil showed excellent anti-moth property. (author). 28 refs., 1 tab., 12 figs.

  16. Comparison of Calcium and Barium Microcapsules as Scaffolds in the Development of Artificial Dermal Papillae.

    Science.gov (United States)

    Liu, Yang; Lin, Changmin; Zeng, Yang; Li, Haihong; Cai, Bozhi; Huang, Keng; Yuan, Yanping; Li, Yu

    2016-01-01

    This study aimed to develop and evaluate barium and calcium microcapsules as candidates for scaffolding in artificial dermal papilla. Dermal papilla cells (DPCs) were isolated and cultured by one-step collagenase treatment. The DPC-Ba and DPC-Ca microcapsules were prepared by using a specially designed, high-voltage, electric-field droplet generator. Selected microcapsules were assessed for long-term inductive properties with xenotransplantation into Sprague-Dawley rat ears. Both barium and calcium microcapsules maintained xenogenic dermal papilla cells in an immunoisolated environment and induced the formation of hair follicle structures. Calcium microcapsules showed better biocompatibility, permeability, and cell viability in comparison with barium microcapsules. Before 18 weeks, calcium microcapsules gathered together, with no substantial immune response. After 32 weeks, some microcapsules were near inflammatory cells and wrapped with fiber. A few large hair follicles were found. Control samples showed no marked changes at the implantation site. Barium microcapsules were superior to calcium microcapsules in structural and mechanical stability. The cells encapsulated in hydrogel barium microcapsules exhibited higher short-term viability. This study established a model to culture DPCs in 3D culture conditions. Barium microcapsules may be useful in short-term transplantation study. Calcium microcapsules may provide an effective scaffold for the development of artificial dermal papilla.

  17. Photocleavable microcapsules built from photoreactive nanospheres.

    Science.gov (United States)

    Yuan, Xiaofeng; Fischer, Karl; Schärtl, Wolfgang

    2005-09-27

    We show how photo-cross-linking of nanoparticles within the micrometer-sized thin oil shell of water-oil-water emulsion droplets leads to a new species of optically addressable microcontainers. The inner water droplet of these emulsions may contain drugs, dyes, or other water-soluble components, leading to filled containers. The thickness, mechanical stability, and light resistance of the container walls can be controlled in a simple way by the amount and adjustable photoreactivity of the nanoparticles. Importantly, the chemical bonds between the nanoparticles constituting the microcapsule shell can be cleaved photochemically by irradiation with UV light. This optically controlled destruction of our microcontainers opens up a pathway to controlled release of the enclosed components, as will be illustrated by the example of enclosed cyclodextrin molecules.

  18. Remotely Activated Microcapsules for Oil Recovery Treatments

    DEFF Research Database (Denmark)

    Mazurek, Malgorzata Natalia

    the pores and ensure permanent water shut-off treatment. To eliminate the danger of premature plug formation, stimulus-responsive materials were investigated. Considering that fractures are extremely hard-to-access places, the designed material should respond to a remotely applied stimulus, in order......-off treatments are extensively investigated, though currently applied materials still suffer from some disadvantages. The main drawback is lack of control over the setting of plugs in the fracture, and this may cause blocking of the injection well and the formation of the plug before placing the material...... to achieve better control over plug formation. The developed material consists of vinyl-functional polydimethylsiloxane (PDMS) microparticles and microcapsules with an encapsulated PDMS cross-linker. Due to reactions between the released cross-linker and vinyl groups on the PDMS microparticles’ surface...

  19. Effect of prolonged gelling time on the intrinsic properties of barium alginate microcapsules and its biocompatibility.

    Science.gov (United States)

    Vaithilingam, Vijayaganapathy; Kollarikova, Gabriella; Qi, Meirigeng; Lacik, Igor; Oberholzer, Jose; Guillemin, Gilles J; Tuch, Bernard E

    2011-01-01

    Pericapsular fibrotic overgrowth (PFO) may be attributed to an immune response against microcapsules themselves or to antigen shedding through microcapsule pores from encapsulated islet tissue. Modification of microcapsules aimed at reducing pore size should prevent PFO and improve graft survival. This study investigated the effect of increased gelling time (20 vs. 2 min) in barium chloride on intrinsic properties of alginate microcapsules and tested their biocompatibility in vivo. Prolonged gelling time affected neither permeability nor size of the microcapsules. However, prolonged gelling time for 20 min produced brittle microcapsules compared to 2 min during compression test. Encapsulation of human islets in both types of microcapsules affected neither islet viability nor function. The presence of PFO when transplanted into a large animal model such as baboon and its absence in small animal models such as rodents suggest that the host immune response towards alginate microcapsules is species rather than alginate specific.

  20. Extraction of metal cations by polyterephthalamide microcapsules containing a poly(acrylic acid) gel.

    Science.gov (United States)

    Laguecir, A; Ernst, B; Frère, Y; Danicher, L; Burgard, M

    2002-01-01

    Polyterephthalamide microcapsules containing a poly(acrylic acid) gel as a macromolecular ligand (PAA-CAPS) were prepared using an original two step polymerization process in a water-in-oil inverse emulsion system. A polyamide microcapsule containing acrylic acid, initiator and cross-linking agent, is formed by interfacial polycondensation of terephthaloyl dichloride with hexamethylenediamine. In situ radical polymerization of the microcapsule core acrylic acid is initiated to obtain encapsulated poly(acrylic acid) gel. Reference polyamide microcapsules, i.e. without ligand (CAPS), were also synthesized. The mean diameter of synthesized microcapsules was 210 microm, and the microcapsule wall thickness was evaluated by SEM and TEM observations of microcapsule cross-section cuts. The microcapsule water content was determined by thermogravimetric experiments. The extractabilities of Cu(II), Ni(II), Co(II) and Zn(II) into PAA-CAPS were examined. The stripping of the various cations can be promoted in diluted hydrochloric acid solutions.

  1. Sustained release of verapamil hydrochloride from sodium alginate microcapsules.

    Science.gov (United States)

    Farhana, S Ayesha; Shantakumar, S M; Shyale, Somashekar; Shalam, Md; Narasu, Laxmi

    2010-04-01

    The objective of the present study was to develop sustained release microcapsules of verapamil hydrochloride (VH) using biodegradable polymers. For this purpose microcapsules embedded verapamil hydrochloride were prepared using sodium alginate alone and also by incorporating some co polymers like methyl cellulose (MC), sodium carboxy methyl cellulose (SCMC) , poly vinyl pyrollidone (PVP) and xanthan gum by employing complex emulsion method of microencapsulation. Microcapsules were prepared in various core: coat ratios to know the effect of polymer and co polymers on drug release. Overall ten formulations were prepared and evaluated for flow behaviour, sieve analysis, drug entrapment efficiency, in vitro dissolution studies, stability studies, including scanning electron microscopy and DSC. The resulting microcapsules were discrete, large, spherical and also free flowing. The drug content in all the batches of microcapsules was found to be uniform. The release was depended on core: coat ratio and nature of the polymers. FTIR analysis revealed chemical integrity between Verapamil hydrochloride (VH), sodium alginate and between the copolymers. Among the four copolymers used methyl cellulose retarded the drug release more than the other three, hence the same formulation was subjected for in vivo studies. The drug release from the microcapsules was found to be following non fickian diffusion. Mechanism of drug release was diffusion controlled first order kinetics. Drug diffusion co efficient and correlation co efficient were also assessed by using various mathematical models. In vivo result analysis of pharmacokinetic parameters revealed that t max of reference and test formulations were almost same. From the study it was concluded that, sustained release Verapamil hydro chloride microcapsules could be achieved with success using sodium alginate alone and also in combination with other biodegradable polymers.

  2. Microcapsules: Reverse Sonoporation and Long-lasting, Safe Contrast

    Science.gov (United States)

    Wrenn, Steven; Dicker, Stephen; Small, Eleanor; Maghnouj, Abdelouahid; Hahn, Stephan A.; Mleczko, Michał; Hensel, Karin; Schmitz, Georg

    We present a novel vehicle designed to serve the dual roles of enhanced ultrasound contrast and ultrasound-triggered drug delivery. The vehicle is comprised of a microcapsule that is filled with water in whose aqueous core a population of freely floating, phospholipid-coated microbubbles is suspended. At ultrasound intensities below the inertial cavitation threshold of the microbubbles, the microbubbles provide enhanced ultrasound contrast. The measured contrast is comparable in strength with SonoVue®. Encapsulation of microbubbles within microcapsules putatively eliminates - or at least significantly slows - dissolution of gas in the bulk aqueous medium, thereby avoiding disappearance of microbubbles that would otherwise occur due to pressure-induced gas diffusion across the surfactant monolayer coating the microbubble-water interface. Results suggest that our vehicle might provide longer lasting contrast in a clinical setting. We demonstrate that encapsulation of the microbubbles within microcapsules causes at least a doubling of the ultrasound intensity necessary to induce inertial cavitation. Moreover, no cell death was observed when cells were insonified in the presence of microbubble-containing microcapsules, whereas appreciable cell death occurs with unencapsulated microbubbles. These results point toward a potential safety benefit during ultrasound contrast imaging by using encapsulated microbubbles. Studies are underway to investigate the feasibility of ultrasound-triggered release of drug from the microcapsules, owing to inertial- or stable-cavitation, or both. Whereas leakage from polymeric microcapsule shells, such as poly(lactic acid), seemingly requires shell rupture and is exceedingly difficult to achieve, leakage across a lipid bilayer microcapsule shells appears feasible. Leakage across a bilayer shell has the additional benefit that the leakage mechanism can be tuned via phase behavior (liquid-ordered versus liquid-disordered) and cavitation

  3. Aluminum phosphate microcapsule flame retardants for flexible polyurethane foams

    Science.gov (United States)

    Zhang, Bin; Liu, Hong; Han, Jian

    2018-04-01

    In this study, highly efficient flame-retardant aluminum phosphate (ALP) microcapsules were synthesized from ALP and ammonium phosphomolybdate trihydrate. The chemical structure of the ALP microcapsules was characterized by scanning electron microscopy and elemental analysis, and the thermal degradation behavior was investigated by thermogravimetric analysis (TGA). Subsequently, flexible polyurethane (PU) foams were prepared with the ALP microcapsules. Limiting oxygen index (LOI) tests, vertical burning tests, smoke density rating (SDR), and cone calorimetric tests were employed to investigate the combustion of the materials. The results showed that the flexible PU foams with 15 parts per hundred polyol by weight (pphp) ALP microcapsules passed the vertical burning test and they had an increased LOI value of 28.5%. The SDR value for PU/20 pphp ALP microcapsule composites was about 16.0% and the SDR value for the pure PU was about 29.0%. The corresponding flame-retardant mechanism was investigated by Fourier transform infrared spectroscopy, TGA, Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) tests, and energy-dispersive X-ray spectrometry.

  4. Surface modified alginate microcapsules for 3D cell culture

    Science.gov (United States)

    Chen, Yi-Wen; Kuo, Chiung Wen; Chueh, Di-Yen; Chen, Peilin

    2016-06-01

    Culture as three dimensional cell aggregates or spheroids can offer an ideal platform for tissue engineering applications and for pharmaceutical screening. Such 3D culture models, however, may suffer from the problems such as immune response and ineffective and cumbersome culture. This paper describes a simple method for producing microcapsules with alginate cores and a thin shell of poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) to encapsulate mouse induced pluripotent stem (miPS) cells, generating a non-fouling surface as an effective immunoisolation barrier. We demonstrated the trapping of the alginate microcapsules in a microwell array for the continuous observation and culture of a large number of encapsulated miPS cells in parallel. miPS cells cultured in the microcapsules survived well and proliferated to form a single cell aggregate. Droplet formation of monodisperse microcapsules with controlled size combined with flow cytometry provided an efficient way to quantitatively analyze the growth of encapsulated cells in a high-throughput manner. The simple and cost-effective coating technique employed to produce the core-shell microcapsules could be used in the emerging field of cell therapy. The microwell array would provide a convenient, user friendly and high-throughput platform for long-term cell culture and monitoring.

  5. Smart responsive microcapsules capable of recognizing heavy metal ions.

    Science.gov (United States)

    Pi, Shuo-Wei; Ju, Xiao-Jie; Wu, Han-Guang; Xie, Rui; Chu, Liang-Yin

    2010-09-15

    Smart responsive microcapsules capable of recognizing heavy metal ions are successfully prepared with oil-in-water-in-oil double emulsions as templates for polymerization in this study. The microcapsules are featured with thin poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (P(NIPAM-co-BCAm)) membranes, and they can selectively recognize special heavy metal ions such as barium(II) or lead(II) ions very well due to the "host-guest" complexation between the BCAm receptors and barium(II) or lead(II) ions. The stable BCAm/Ba(2+) or BCAm/Pb(2+) complexes in the P(NIPAM-co-BCAm) membrane cause a positive shift of the volume phase transition temperature of the crosslinked P(NIPAM-co-BCAm) hydrogel to a higher temperature, and the repulsion among the charged BCAm/Ba(2+) or BCAm/Pb(2+) complexes and the osmotic pressure within the P(NIPAM-co-BCAm) membranes result in the swelling of microcapsules. Induced by recognizing barium(II) or lead(II) ions, the prepared microcapsules with P(NIPAM-co-BCAm) membranes exhibit isothermal and significant swelling not only in outer and inner diameters but also in the membrane thickness. The proposed microcapsules in this study are highly attractive for developing smart sensors and/or carriers for detection and/or elimination of heavy metal ions. Copyright 2010 Elsevier Inc. All rights reserved.

  6. Printing of polymer microcapsules for enzyme immobilization on paper substrate.

    Science.gov (United States)

    Savolainen, Anne; Zhang, Yufen; Rochefort, Dominic; Holopainen, Ulla; Erho, Tomi; Virtanen, Jouko; Smolander, Maria

    2011-06-13

    Poly(ethyleneimine) (PEI) microcapsules containing laccase from Trametes hirsuta (ThL) and Trametes versicolor (TvL) were printed onto paper substrate by three different methods: screen printing, rod coating, and flexo printing. Microcapsules were fabricated via interfacial polycondensation of PEI with the cross-linker sebacoyl chloride, incorporated into an ink, and printed or coated on the paper substrate. The same ink components were used for three printing methods, and it was found that laccase microcapsules were compatible with the ink. Enzymatic activity of microencapsulated TvL was maintained constant in polymer-based ink for at least eight weeks. Thick layers with high enzymatic activity were obtained when laccase-containing microcapsules were screen printed on paper substrate. Flexo printed bioactive paper showed very low activity, since by using this printing method the paper surface was not fully covered by enzyme microcapsules. Finally, screen printing provided a bioactive paper with high water-resistance and the highest enzyme lifetime.

  7. Nanocomposite microcapsules from powders of polyhydroxybutyrate (PHB) and smectite clays

    International Nuclear Information System (INIS)

    Silva-Valenzuela, Maria das Gracas da; Wang, Shu Hui; Wiebeck, Helio; Valenzuela-Diaz, Francisco R.

    2009-01-01

    Drug delivery systems involving microcapsules provide an attractive way to improve the performance of many chemical and biological substances. These systems may be used for several industrial segments, especially medical, pharmaceuticals and cosmetics. PHB is a polyhydroxyalkanoate available in powder form, biocompatible, biodegradable and inert towards animal tissues. The obtained PHB/smectite clay nanocomposite improved the physical-chemical properties of PHB, including its biodegradability. In this work, we describe the preparation of microcapsules from two nanocomposites systems: a) PHB and Cloisite 20A organoclay (PHB1) and b) PHB and natural Brazilian green polycationic clay (PHB2). When analyzed by XRD, the films and microcapsules did not show a d (001) peak, demonstrating an exfoliated structure for the nanocomposites. The films have shown by SEM an homogeneous distribution with the clay mineral particles spread homogeneously by the PHB film. The new microcapsules/nanocomposites showed an 'hydrangea' morphology. The diameter of the microcapsules was variable between 0.5-15 μm. (author)

  8. Geometric screening of core/shell hydrogel microcapsules using a tapered microchannel with interdigitated electrodes.

    Science.gov (United States)

    Niu, Ye; Qi, Lin; Zhang, Fen; Zhao, Yi

    2018-07-30

    Core/shell hydrogel microcapsules attract increasing research attention due to their potentials in tissue engineering, food engineering, and drug delivery. Current approaches for generating core/shell hydrogel microcapsules suffer from large geometric variations. Geometrically defective core/shell microcapsules need to be removed before further use. High-throughput geometric characterization of such core/shell microcapsules is therefore necessary. In this work, a continuous-flow device was developed to measure the geometric properties of microcapsules with a hydrogel shell and an aqueous core. The microcapsules were pumped through a tapered microchannel patterned with an array of interdigitated microelectrodes. The geometric parameters (the shell thickness and the diameter) were derived from the displacement profiles of the microcapsules. The results show that this approach can successfully distinguish all unencapsulated microparticles. The geometric properties of core/shell microcapsules can be determined with high accuracy. The efficacy of this method was demonstrated through a drug releasing experiment where the optimization of the electrospray process based on geometric screening can lead to controlled and extended drug releasing profiles. This method does not require high-speed optical systems, simplifying the system configuration and making it an indeed miniaturized device. The throughput of up to 584 microcapsules per minute was achieved. This study provides a powerful tool for screening core/shell hydrogel microcapsules and is expected to facilitate the applications of these microcapsules in various fields. Copyright © 2018 Elsevier B.V. All rights reserved.

  9. Synthetic quorum sensing in model microcapsule colonies

    Science.gov (United States)

    Shum, Henry; Balazs, Anna C.

    2017-08-01

    Biological quorum sensing refers to the ability of cells to gauge their population density and collectively initiate a new behavior once a critical density is reached. Designing synthetic materials systems that exhibit quorum sensing-like behavior could enable the fabrication of devices with both self-recognition and self-regulating functionality. Herein, we develop models for a colony of synthetic microcapsules that communicate by producing and releasing signaling molecules. Production of the chemicals is regulated by a biomimetic negative feedback loop, the “repressilator” network. Through theory and simulation, we show that the chemical behavior of such capsules is sensitive to both the density and number of capsules in the colony. For example, decreasing the spacing between a fixed number of capsules can trigger a transition in chemical activity from the steady, repressed state to large-amplitude oscillations in chemical production. Alternatively, for a fixed density, an increase in the number of capsules in the colony can also promote a transition into the oscillatory state. This configuration-dependent behavior of the capsule colony exemplifies quorum-sensing behavior. Using our theoretical model, we predict the transitions from the steady state to oscillatory behavior as a function of the colony size and capsule density.

  10. Understanding release kinetics of biopolymer drug delivery microcapsules for biomedical applications

    International Nuclear Information System (INIS)

    Desai, Salil; Perkins, Jessica; Harrison, Benjamin S.; Sankar, Jag

    2010-01-01

    Drug delivery and dosage concentrations are considered as major focal points in conventional as well as battlefield emergency medicine. The concept of localizing drug delivery via microcapsules is an evolving field to confine the adverse side effects of high concentration drug doses. This paper focuses on understanding release kinetics through biopolymer microcapsules for time-dependent drug release. Calcium alginate microcapsules were manufactured using a direct-write inkjet technique. Rhodamine 6G was used as the release agent to observe the release kinetics from calcium alginate beads in distilled water. A design of experiments was constructed to compare the effect of the microcapsule diameter and different concentrations of calcium chloride (M) and sodium alginate (%, w/v) solutions on the release kinetics profiles of the microcapsules. This research gives insight to identify favorable sizes of microcapsules and concentrations of sodium alginate and calcium chloride solutions for controlled release behavior of drug delivery microcapsules.

  11. Synthesis of Bioactive Microcapsules Using a Microfluidic Device

    Directory of Open Access Journals (Sweden)

    Chang-Soo Lee

    2012-07-01

    Full Text Available Bioactive microcapsules containing Bacillus thuringiensis (BT spores were generated by a combination of a hydro gel, microfluidic device and chemical polymerization method. As a proof-of-principle, we used BT spores displaying enhanced green fluorescent protein (EGFP on the spore surface to spatially direct the EGFP-presenting spores within microcapsules. BT spore-encapsulated microdroplets of uniform size and shape are prepared through a flow-focusing method in a microfluidic device and converted into microcapsules through hydrogel polymerization. The size of microdroplets can be controlled by changing both the dispersion and continuous flow rate. Poly(N-isoproplyacrylamide (PNIPAM, known as a hydrogel material, was employed as a biocompatible material for the encapsulation of BT spores and long-term storage and outstanding stability. Due to these unique properties of PNIPAM, the nutrients from Luria-Bertani complex medium diffused into the microcapsules and the microencapsulated spores germinated into vegetative cells under adequate environmental conditions. These results suggest that there is no limitation of transferring low-molecular-weight-substrates through the PNIPAM structures, and the viability of microencapsulated spores was confirmed by the culture of vegetative cells after the germinations. This microfluidic-based microencapsulation methodology provides a unique way of synthesizing bioactive microcapsules in a one-step process. This microfluidic-based strategy would be potentially suitable to produce microcapsules of various microbial spores for on-site biosensor analysis.

  12. [Preparation of polyelectrolyte microcapsules containing ferrosoferric oxide nanoparticles].

    Science.gov (United States)

    Liu, Xiao-Qing; Zheng, Chun-Li; Zhu, Jia-Bi

    2011-01-01

    In this study, polyelectrolyte microcapsules have been fabricated by biocompatible ferrosoferric oxide nanoparticles (Fe3O4 NPs) and poly allyamine hydrochloride (PAH) using layer by layer assembly technique. The Fe3O4 NPs were prepared by chemical co-precipitation, and characterized by transmission electron microscopy (TEM) and infrared spectrum (IR). Quartz cell also was used as a substrate for building multilayer films to evaluate the capability of forming planar film. The result showed that Fe3O4 NPs were selectively deposited on the surface of quartz cell. Microcapsules containing Fe3O4 NPs were fabricated by Fe3O4 NPs and PAH alternately self-assembly on calcium carbonate microparticles firstly, then 0.2 molL(-1) EDTA was used to remove the calcium carbonate. Scanning electron microscopy (SEM), Zetasizer and vibrating sample magnetometer (VSM) were used to characterize the microcapsule's morphology, size and magnetic properties. The result revealed that Fe3O4 NPs and PAH were successfully deposited on the surface of CaCO3 microparticles, the microcapsule manifested superparamagnetism, size and saturation magnetization were 4.9 +/- 1.2 microm and 8.94 emu x g(-1), respectively. As a model drug, Rhodamin B isothiocyanate labeled bovine serum albumin (RBITC-BSA) was encapsulated in microcapsule depended on pH sensitive of the microcapsule film. When pH 5.0, drug add in was 2 mg, the encapsulation efficiency was (86.08 +/- 3.36) % and the drug loading was 8.01 +/- 0.30 mg x m(L-1).

  13. Poly (DADMAC) encapsulation in PES microcapsules utilizing gamma radiation

    International Nuclear Information System (INIS)

    Francis, Sanju; Varshney, Lalit; Tirumalesh, Keesari; Sabharwal, Sunil

    2009-01-01

    In this communication, a method for encapsulation of a polymeric resin using radiation technology is reported. The quaternary ammonium resin, polydiallyldimethylammonium chloride (PDADMAC) was incorporated in the core of a preformed hollow polyethersulfone microcapsule, using radiation technology, for the extraction of anions from aqueous solutions. The idea was to introduce the monomer into the porous microcapsules and initiate polymerization by radiation to trap the polymer formed inside the capsule. The resultant capsule was able to take up and exchange some anions (F - , Cl - , Br - , NO 3 2- and SO 4 2- ) at relatively low concentrations

  14. Bupivacaine in microcapsules prolongs analgesia after subcutaneous infiltration in humans: a dose-finding study

    DEFF Research Database (Denmark)

    Pedersen, Juri L; Lillesø, Jesper; Hammer, Niels A

    2004-01-01

    In this study, we examined the onset and duration of local analgesic effects of bupivacaine incorporated into biodegradable microcapsules (extended-duration local anesthetic; EDLA) administered as subcutaneous infiltrations in different doses in humans. In 18 volunteers, the skin on the medial calf...... was infiltrated with 10 mL of EDLA, and the opposite calf was infiltrated with 10 mL of aqueous bupivacaine (5.0 mg/mL) in a double-blinded, randomized manner. Three different concentrations of EDLA were tested (6.25, 12.5, and 25 mg/mL), with 6 subjects in each group. Pain responses to mechanical and heat......, and 6 mo after the injections. The time to maximum effects was significantly shorter for aqueous bupivacaine (2-6 h) than for EDLA (4-24 h), but there were no significant differences between the maximum effects of EDLA and aqueous bupivacaine. From 24 to 96 h after the injections, EDLA was significantly...

  15. Modelling of drug release from ensembles of aspirin microcapsules ...

    African Journals Online (AJOL)

    Purpose: In order to determine the drug release profile of an ensemble of aspirin crystals or microcapsules from its particle distribution a mathematical model that considered the individual release characteristics of the component single particles was developed. The model assumed that under sink conditions the release ...

  16. Microfluidic production of multiple emulsions and functional microcapsules

    NARCIS (Netherlands)

    Lee, Tae Yong; Choi, Tae Min; Shim, Tae Soup; Frijns, Raoul A.M.; Kim, Shin Hyun

    2016-01-01

    Recent advances in microfluidics have enabled the controlled production of multiple-emulsion drops with onion-like topology. The multiple-emulsion drops possess an intrinsic core-shell geometry, which makes them useful as templates to create microcapsules with a solid membrane. High flexibility

  17. Research of amoxicillin microcapsules preparation playing micro-jetting technology.

    Science.gov (United States)

    Sun, Huaiyuan; Gu, Qingqing; Liao, Yuehua; Sun, Chenjie

    2015-01-01

    With polylactic-co-glycolic acid(PLGA) as shell material of microcapsule, amoxicillin as the model, poly(vinyl alcohol) and twain as surfactant, amoxicillin-PLGA microcapsules were manufactured using digital micro-jetting technology and a glass nozzle of 40μm diameter. The influences of the parameters of micro-jetting system on the mean grain size and size distribution of amoxicillin-PLGA microcapsules were studied with single factor analysis and orthogonal experiment method, namely, PLGA solution concentration, driving voltage, jetting frequency, stirrer speed, etc. The optimal result was obtained; the form representation of microcapsule was analyzed as well. The results show that, under certain conditions of experimental drug prescription, driving voltage was proportional to the particle size; jetting frequency and stirrer speed were inversely proportional. When the PLGA concentration for 3%, driving voltage for 80V, the jetting frequency for 10000Hz and the stirrer speed for 750rpm, the particles were in an ideal state with the mean grain size of 60.246μm, the encapsulation efficiency reached 62.39% and 2.1% for drug loading.

  18. The Analgesic Potential of Cannabinoids

    Science.gov (United States)

    Elikottil, Jaseena; Gupta, Pankaj; Gupta, Kalpna

    2013-01-01

    Historically and anecdotally cannabinoids have been used as analgesic agents. In recent years, there has been an escalating interest in developing cannabis-derived medications to treat severe pain. This review provides an overview of the history of cannabis use in medicine, cannabinoid signaling pathways, and current data from preclinical as well as clinical studies on using cannabinoids as potential analgesic agents. Clinical and experimental studies show that cannabis-derived compounds act as anti-emetic, appetite modulating and analgesic agents. However, the efficacy of individual products is variable and dependent upon the route of administration. Since opioids are the only therapy for severe pain, analgesic ability of cannabinoids may provide a much-needed alternative to opioids. Moreover, cannabinoids act synergistically with opioids and act as opioid sparing agents, allowing lower doses and fewer side effects from chronic opioid therapy. Thus, rational use of cannabis based medications deserves serious consideration to alleviate the suffering of patients due to severe pain. PMID:20073408

  19. Model for Microcapsule Drug Release with Ultrasound-Activated Enhancement.

    Science.gov (United States)

    Tsao, Nadia H; Hall, Elizabeth A H

    2017-11-14

    Microbubbles and microcapsules of silane-polycaprolactone (SiPCL) have been filled with a fluorescent acridium salt (lucigenin) as a model for a drug-loaded delivery vehicle. The uptake and delivery were studied and compared with similar microbubbles and microcapsules of silica/mercaptosilica (S/M/S). Positively charged lucigenin was encapsulated through an electrostatic mechanism, following a Type I Langmuir isotherm as expected, but with an additional multilayer uptake that leads to a much higher loading for the SiPCL system (∼280 μg/2.4 × 10 9 microcapsules compared with ∼135 μg/2.4 × 10 9 microcapsules for S/M/S). Whereas the lucigenin release from the S/M/S bubbles and capsules loaded below the solubility limit is consistent with diffusion from a monolithic structure, the SiPCL structures show distinct release patterns; the Weibull function predicts a general trend for diffusion from normal Euclidean space at short times tending toward diffusion out of fractal spaces with increasing time. As a slow release system, the dissolution time (T d ) increases from 1 to 2 days for the S/M/S and for the low concentration, loaded SiPCl vehicles to ∼10 days for the high loaded microcapsules. However, T d can be reduced on insonation to 2 days, indicating the potential to gain control over the local enhanced release with ultrasound. This was tested for a docetaxel model and its effect on C4-2B prostate cancer cells, showing improved cell toxicity for concentrations below the normal EC 50 in solution.

  20. Genipin Cross-Linked Polymeric Alginate-Chitosan Microcapsules for Oral Delivery: In-Vitro Analysis

    Directory of Open Access Journals (Sweden)

    Hongmei Chen

    2009-01-01

    Full Text Available We have previously reported the preparation of the genipin cross-linked alginate-chitosan (GCAC microcapsules composed of an alginate core with a genipin cross-linked chitosan membrane. This paper is the further investigation on their structural and physical characteristics. Results showed that the GCAC microcapsules had a smooth and dense surface and a networked interior. Cross-linking by genipin substantially reduced swelling and physical disintegration of microcapsules induced by nongelling ions and calcium sequestrants. Strong resistance to mechanical shear forces and enzymatic degradation was observed. Furthermore, the GCAC membranes were permeable to bovine serum albumin and maintained a molecular weight cutoff at 70 KD, analogous to the widely studied alginate-chitosan, and alginate-poly-L-lysine-alginate microcapsules. The release features and the tolerance of the GCAC microcapsules in the stimulated gastrointestinal environment were also investigated. This GCAC microcapsule formulation offers significant potential as a delivery vehicle for many biomedical applications.

  1. Microcapsules Filled with a Palm Oil-Based Alkyd as Healing Agent for Epoxy Matrix

    OpenAIRE

    Nurshafiza Shahabudin; Rosiyah Yahya; Seng Neon Gan

    2016-01-01

    One of the approaches to prolong the service lifespan of polymeric material is the development of self-healing ability by means of embedded microcapsules containing a healing agent. In this work, poly(melamine-urea-formaldehyde) (PMUF) microcapsules containing a palm oil-based alkyd were produced by polymerization of melamine resin, urea and formaldehyde that encapsulated droplets of the suspended alkyd particles. A series of spherical and free-flowing microcapsules were obtained. The chemica...

  2. Preparation of magnetic and pH-responsive chitosan microcapsules via sonochemical method.

    Science.gov (United States)

    Xu, Fengzhi; Zhao, Tianqi; Wang, Shurong; Liu, Songfeng; Yang, Ting; Li, Zhanfeng; Wang, Hongyan; Cui, Xuejun

    2016-01-01

    Magnetic and pH-responsive chitosan microcapsules (MPRCMCs) were prepared by a simple sonochemical method. Superparamagnetic oleic acid modified Fe3O4 nanoparticles (OA-Fe3O4 NPs) and hydrophobic drugs could be directly loaded into MPRCMCs during sonication. The obtained microcapsules had a well-defined spherical morphology with the average size of 2 μm. The microcapsules showed an excellent magnetic property. In addition, the pH-responsive controlled release of coumarin 6 (C6) from MPRCMCs indicated that the developed microcapsules could be a promising candidate for drugs carriers.

  3. NATURAL AND PARTIALLY SYNTETIC ANALGESICS

    Directory of Open Access Journals (Sweden)

    Stevan Glogovac

    2005-12-01

    Full Text Available Humans have a long hystory of stimulating and mind-altering substances use. Depressive drugs, including morphine and other narcotics, barbiturates and ethanol, are strongly addictive for susceptible individuals. The phenomenon is most striking in the case of opiates. Morphine is an alkaloid of opium. Named after the Roman god of dreams, Morpheus, the compound has potent analgesic properties toward all types of pain. By supstitution of two hydroxylic groups of morphine many natural and semysyntetic derivatives with different pharmacological activity and analgesic action are obtained. Determinations and quantifications of narcotic analgesics in drug addicts are important in forensic medicine and clinical toxicology. With development of highly sensitive chromatography technique (HPLC-GC, GH-MS, more and more substances are determined, including opioid drugs: morphine, codeine, dyhydrocodeine, and heroin and 6-monoacetyl morphine. Hair analysys by HPLC/MS spectroscopy is an effective forensic tool for determining the use of abused drugs. The “fingerprint” for heroin in the mixture with the other substances(1-10 components is determined by 1D-TOCSY NMR.

  4. Sequential Release of Proteins from Structured Multishell Microcapsules.

    Science.gov (United States)

    Shimanovich, Ulyana; Michaels, Thomas C T; De Genst, Erwin; Matak-Vinkovic, Dijana; Dobson, Christopher M; Knowles, Tuomas P J

    2017-10-09

    In nature, a wide range of functional materials is based on proteins. Increasing attention is also turning to the use of proteins as artificial biomaterials in the form of films, gels, particles, and fibrils that offer great potential for applications in areas ranging from molecular medicine to materials science. To date, however, most such applications have been limited to single component materials despite the fact that their natural analogues are composed of multiple types of proteins with a variety of functionalities that are coassembled in a highly organized manner on the micrometer scale, a process that is currently challenging to achieve in the laboratory. Here, we demonstrate the fabrication of multicomponent protein microcapsules where the different components are positioned in a controlled manner. We use molecular self-assembly to generate multicomponent structures on the nanometer scale and droplet microfluidics to bring together the different components on the micrometer scale. Using this approach, we synthesize a wide range of multiprotein microcapsules containing three well-characterized proteins: glucagon, insulin, and lysozyme. The localization of each protein component in multishell microcapsules has been detected by labeling protein molecules with different fluorophores, and the final three-dimensional microcapsule structure has been resolved by using confocal microscopy together with image analysis techniques. In addition, we show that these structures can be used to tailor the release of such functional proteins in a sequential manner. Moreover, our observations demonstrate that the protein release mechanism from multishell capsules is driven by the kinetic control of mass transport of the cargo and by the dissolution of the shells. The ability to generate artificial materials that incorporate a variety of different proteins with distinct functionalities increases the breadth of the potential applications of artificial protein-based materials

  5. Investigation of UV photocurable microcapsule inner crosslink extent

    Science.gov (United States)

    Li, Xiaowei; Meng, Shuangshuang; Lai, Weidong; Yu, Haiyang; Fu, Guangsheng

    2008-11-01

    UV photocuring technology has encountered increased applications in recent years, which finds a variety of applications on protective coating of the optical-fiber, ink and optical recording materials. Combined with techniques of photohardenable, microcapsule, heat-sensitive and interface-polymerization method, a novel photoheat sensitive recording material of non-silver salt is explored in this thesis. Microcapsules are particulate substance with a core and shell structure, where photopolymerizable composition, monofunctional/polyfunctional diluents, photopolymerization initiator, photosensitivity enhancing agent and dye precursor are encapsulated as the internal phase. In this paper introduced the characteristics and curing mechanism of photo-sensitive microcapsule materials. The photocuring process may be a complex-function with photopolymerizable compound and photopolymerization initiator. For the sake of high photocuring speed and degree, optimal photo-sensitive materials were selected. In order to match with the light source excitation wavelength and absorb more wider ultraviolet band, combined type of photo-polymerization initiators were employed. With the kinds and dosage of photopolymerization initiator changing, the photocuring speed and quality can be ameliorated. Through studying the UV-visible absorption spectrum and infra-red spectrum of the material , the optical response property of the inner compound can be obtained.

  6. Improved quorum sensing capacity by culturing Vibrio harveyi in microcapsules.

    Science.gov (United States)

    Gao, Meng; Song, Huiyi; Liu, Xiudong; Yu, Weiting; Ma, Xiaojun

    2016-04-01

    Microcapsule entrapped low density cells with culture (ELDCwc), different from free cell culture, conferred stronger stress resistance and improved cell viability of microorganisms. In this paper, the quorum sensing (QS) system of Vibrio harveyi was used to investigate changes when cells were cultured in microcapsules. Cells in ELDCwc group grew into cell aggregates, which facilitated cell-cell communication and led to increased bioluminescence intensity. Moreover, the luxS-AI-2 system, a well-studied QS signal pathway, was detected as both luxS gene and the AI-2 signaling molecule, and the results were analyzed with respect to QS capacity of unit cell. The V. harveyi of ELDCwc also showed higher relative gene expression and stronger quorum sensing capacity when compared with free cells. In conclusion, the confined microcapsule space can promote the cell aggregates formation, reduce cell-cell communication distance and increase local concentration of signal molecule, which are beneficial to bacterial QS. Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  7. Micromechanical Properties of a New Polymeric Microcapsule for Self-Healing Cementitious Materials

    Directory of Open Access Journals (Sweden)

    Leyang Lv

    2016-12-01

    Full Text Available Self-healing cementitious materials containing a microencapsulated healing agent are appealing due to their great application potential in improving the serviceability and durability of concrete structures. In this study, poly(phenol–formaldehyde (PF microcapsules that aim to provide a self-healing function for cementitious materials were prepared by an in situ polymerization reaction. Size gradation of the synthesized microcapsules was achieved through a series of sieving processes. The shell thickness and the diameter of single microcapsules was accurately measured under environmental scanning electron microscopy (ESEM. The relationship between the physical properties of the synthesized microcapsules and their micromechanical properties were investigated using nanoindentation. The results of the mechanical tests show that, with the increase of the mean size of microcapsules and the decrease of shell thickness, the mechanical force required to trigger the self-healing function of microcapsules increased correspondingly from 68.5 ± 41.6 mN to 198.5 ± 31.6 mN, featuring a multi-sensitive trigger function. Finally, the rupture behavior and crack surface of cement paste with embedded microcapsules were observed and analyzed using X-ray computed tomography (XCT. The synthesized PF microcapsules may find potential application in self-healing cementitious materials.

  8. Preparation and Characterization of Modified Montmorillonite/Paraffin Phase Change Microcapsules for Energy Storage

    Directory of Open Access Journals (Sweden)

    LIN Sen

    2017-03-01

    Full Text Available The phase change microcapsules of modified montmorillonite/paraffin were prepared by Pickering emulsion method. Analytic techniques of optical microscopy, scanning electron microscopy(SEM, infrared spectroscopy(FTIR, differential scanning calorimetry(DSC and thermogravimetry(TG were utilized for characterizing chemical structure, morphology and thermal properties. Results show that modified montmorillonite as a new type wall material has excellent performance for protecting core material of paraffin. FTIR spectra of phase change of modified montmorillonite/paraffin microcapsules shows that their characteristic peaks match with corresponding peaks of pure paraffin and modified montmorillonite. DSC results indicate that modified montmorillonite/paraffin microcapsules have similar solid-liquid phase change temperature with pure paraffin. The phase transition enthalpy values of microcapsules with paraffin contents varying from 55% to 80% are 110.5-147.2J/g, indicating that microcapsules have excellent thermal storage performance and the phase change properties can be adjusted by changing contents of paraffin. TG results confirm that modified montmorillonite/paraffin microcapsules have outstanding thermal stability. The presented study indicates that modified montmorillonite is a suitable wall material for preparing paraffin microcapsule. Modified montmorillonite/paraffin microcapsules have advantages of low cost and high performance with a great application potential in the field of thermal storage.

  9. Preparation of keratin-based microcapsules for encapsulation of hydrophilic molecules.

    Science.gov (United States)

    Rajabinejad, Hossein; Patrucco, Alessia; Caringella, Rosalinda; Montarsolo, Alessio; Zoccola, Marina; Pozzo, Pier Davide

    2018-01-01

    The interest towards microcapsules based on non-toxic, biodegradable and biocompatible polymers, such as proteins, is increasing considerably. In this work, microcapsules were prepared using water soluble keratin, known as keratoses, with the aim of encapsulating hydrophilic molecules. Keratoses were obtained via oxidizing extraction of pristine wool, previously degreased by Soxhlet. In order to better understand the shell part of microcapsules, pristine wool and obtained keratoses were investigated by FT-IR, gel-electrophoresis and HPLC. Production of the microcapsules was carried out by a sonication method. Thermal properties of microcapsules were investigated by DSC. Microencapsulation and dye encapsulation yields were obtained by UV-spectroscopy. Morphological structure of microcapsules was studied by light microscopy, SEM, and AFM. The molecular weights of proteins analyzed using gel-electrophoresis resulted in the range of 38-62kDa. The results confirmed that the hydrophilic dye (Telon Blue) was introduced inside the keratoses shells by sonication and the final microcapsules diameter ranged from 0.5 to 4µm. Light microscope investigation evidenced the presence of the dye inside the keratoses vesicles, confirming their capability of encapsulating hydrophilic molecules. The microcapsule yield and dye encapsulation yield were found to be 28.87±3% and 83.62±5% respectively. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Interaction between microcapsules and cementitious matrix after cracking in a self-healing system

    NARCIS (Netherlands)

    Wang, X.; Xing, F.; Zhang, M.; Han, N.; Qian, Z.

    2013-01-01

    A new type of self-healing cementitious composites by using organic microcapsules is designed in Guangdong Key Laboratory of Durability for Coastal Civil Engineering, Shenzhen University. For the organic microcapsules, the shell material is urea formoldehyde (UF), and the core healing agent is

  11. Preparation and characterisation of biodegradable pollen-chitosan microcapsules and its application in heavy metal removal.

    Science.gov (United States)

    Sargın, İdris; Kaya, Murat; Arslan, Gulsin; Baran, Talat; Ceter, Talip

    2015-02-01

    Biosorbents have been widely used in heavy metal removal. New resources should be exploited to develop more efficient biosorbents. This study reports the preparation of three novel chitosan microcapsules from pollens of three common, wind-pollinated plants (Acer negundo, Cupressus sempervirens and Populus nigra). The microcapsules were characterized (Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and elemental analysis) and used in removal of heavy metal ions: Cd(II), Cr(III), Cu(II), Ni(II) and Zn(II). Their sorption capacities were compared to those of cross-linked chitosan beads without pollen grains. C. sempervirens-chitosan microcapsules exhibited better performance (Cd(II): 65.98; Cu(II): 67.10 and Zn(II): 49.55 mg g(-1)) than the other microcapsules and the cross-linked beads. A. negundo-chitosan microcapsules were more efficient in Cr(III) (70.40 mg g(-1)) removal. P. nigra-chitosan microcapsules were found to be less efficient. Chitosan-pollen microcapsules (except P. nigra-chitosan microcapsules) can be used in heavy metal removal. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Characterization of short chain fatty acid microcapsules produced by spray drying

    International Nuclear Information System (INIS)

    Teixeira, Maria Ines; Andrade, Leonardo R.; Farina, Marcos; Rocha-Leao, Maria Helena M.

    2004-01-01

    Microcapsules containing short chain fatty acids (SCFA) were produced by spray drying technique using different proportions of gum arabic and maltodextrin as wall materials. Proportions of 5% and 10% of gum arabic and maltodextrin isolated, and a mixture of 5% of maltodextrin and 5% of gum arabic were added to samples of fermented permeate containing SCFA, and spray dried. The microstructure of microcapsules was studied by scanning electron microscopy (SEM) and the size distribution was obtained by laser diffraction. SEM observations showed that the microcapsules structures were affected by type and proportion of wall material tested. Most of the microcapsules containing gum arabic as wall material had surface dents or invaginations. Microcapsules containing maltodextrin were spherical with few surface dents and some of them had pores. The larger microcapsule sizes were observed in those containing maltodextrin. Our results show that microstructure and size of microcapsules are affected by type and proportion of biomaterial used. The samples containing 5% of maltodextrin and the mixture of 5% of gum arabic with 5% of maltodextrin presented smooth surfaces and homogenous size distributions. The corresponding microcapsules are considered optimal to food industrial uses due to the flowability property. Besides, these capsules were found to present a homogenous distribution of diameters, which may give a homogenous flavor distribution to the food products

  13. Pure analgesics in a rheumatological outpatient clinic

    Directory of Open Access Journals (Sweden)

    M.A. Cimmino

    2011-09-01

    Full Text Available Objective: Pure analgesics are only rarely used by Italian clinicians and this holds true also for rheumatologists. This work is concerned with an evaluation of the use of analgesics in a rheumatological outpatient clinic during the period 1989-1999. Methods: The records of 1705 patients consecutively seen at the clinic were downloaded on a specifically built website. Results: 4469 visits were considered. In 260 of them (5.8%, analgesics were prescribed to 234 (13.7% patients. The number of patients with a prescription of analgesics steadily increased during the years 1989-1999. The diagnoses in patients assuming analgesics were: osteoarthritis (47.1%, inflammatory arthritis (24.2%, soft tissue rheumatisms (13.7%, nonspecific arthralgia/myalgia (7.5%, and connective tissue diseases (2.6%. Peripheral analgesics were used in 188 (82.5% patients and central analgesics were used in the remaining 40 patients (17.5%. Analgesic drugs were used mainly in degenerative joint conditions. The indications for analgesics in the 55 patients with inflammatory arthrits were: (a partial or total remission of arthritis; for this reason non-steroidal anti-inflammatory drugs were no longer required in 18 patients; (b to increase the analgesic effect of NSAIDs in 23 patients; (c contraindications to NSAIDs in 14 patients (renal failure in 2 patients, gastritis in 10, allergy and bleeding in the remaining two. Conclusions: About 14% of our outpatients were treated with analgesics with an increasing trend in the examined period. The main indications for analgesics are degenerative conditions but they can be used also in selected patients with arthritis.

  14. Analgesic Activity of Sphaeranthus indicus Linn

    OpenAIRE

    P. Malairajan; G. Venu Babu; A. Saral; S. Mahesh; Gitanjali

    2012-01-01

    The ethanol extracts of the whole plant Sphaeranthus indicus Linn. (ALSI) (Compositae) was tested for analgesic activity by tail immersion method in rat models. The test extracts were tested at 250 mg and 500 mg/kg body weight. The analgesic activity was assessed by keeping pentazocine 10 mg/kg as standard drug. The parameters studied were tail withdrawal reflex and percentage protection. In tail immersion method ALSI pretreatment caused significant increase in analgesic activity and percenta...

  15. Analgesic Potential of Essential Oils

    Directory of Open Access Journals (Sweden)

    José Ferreira Sarmento-Neto

    2015-12-01

    Full Text Available Pain is an unpleasant sensation associated with a wide range of injuries and diseases, and affects approximately 20% of adults in the world. The discovery of new and more effective drugs that can relieve pain is an important research goal in both the pharmaceutical industry and academia. This review describes studies involving antinociceptive activity of essential oils from 31 plant species. Botanical aspects of aromatic plants, mechanisms of action in pain models and chemical composition profiles of the essential oils are discussed. The data obtained in these studies demonstrate the analgesic potential of this group of natural products for therapeutic purposes.

  16. Process for the production of radiation curable coating compositions containing microcapsules

    International Nuclear Information System (INIS)

    Lee, Y.; Shackle, D.R.

    1979-01-01

    A process for producing a radiation curable coating composition containing microcapsules comprises the steps of preparing a dispersion of substantially discrete microcapsules in a continuous phase, the continuous phase comprising a liquid volatile solvent, preparing a liquid radiation curable suspending medium, the liquid radiation curable suspending medium comprising one or more ethylenically unsaturated organic compounds having at least one terminal ethylenic group per molecule, mixing the dispersion of substantially discrete microcapsules in the continuous phase and the liquid radiation curable suspending medium with turbulent agitation to form an intimate mixture of the dispersion of microcapsules and the liquid radiation curable suspending medium, and applying heat and vacuum to the mixture, while maintaining the agitation, until the liquid volatile solvent is substantially removed from the mixture to form a dispersion of substantially discrete microcapsules in the liquid radiation curable suspending medium. The heat is applied to maintain the mixture at a temperature above the boiling point of the volatile solvent at the vacuum level

  17. Preparation of stable alginate microcapsules coated with chitosan or polyethyleneimine for extraction of heavy metal ions.

    Science.gov (United States)

    Outokesh, Mohammad; Mimura, Hitoshi; Niibori, Yuichi; Tanaka, Kouichi

    2006-05-01

    Stable alginate microcapsules in dried form containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid (HA) were prepared by coating of fresh alginate microcapsules with chitosan or polyethyleneimine (PEI). The thickness of coatings was estimated by electron probe microanalysis (EPMA), along with electron microscopy (SEM), as well as comparison of uptake percentage of coated and uncoated hollow capsules. Characterization of microcapsules was carried out by Ag(+) uptake experiments, destructive chemical analyses and thermogravimetric methods (TG and DTA). Chemical stability tests in HNO(3) and NaNO(3) media indicated that the coating with 4-double layer chitosan or mono-layer PEI led to an appreciable enhancement of impermeability in the range of pH > 1 or [Na(+)] microcapsules nearly completely hold their extractant content. Stable extractive microcapsules have an appreciable potential for the selective removal of heavy metal ions.

  18. Construction of a controlled-release delivery system for pesticides using biodegradable PLA-based microcapsules.

    Science.gov (United States)

    Liu, Baoxia; Wang, Yan; Yang, Fei; Wang, Xing; Shen, Hong; Cui, Haixin; Wu, Decheng

    2016-08-01

    Conventional pesticides usually need to be used in more than recommended dosages due to their loss and degradation, which results in a large waste of resources and serious environmental pollution. Encapsulation of pesticides in biodegradable carriers is a feasible approach to develop environment-friendly and efficient controlled-release delivery system. In this work, we fabricated three kinds of polylactic acid (PLA) carriers including microspheres, microcapsules, and porous microcapsules for controlled delivery of Lambda-Cyhalothrin (LC) via premix membrane emulsification (PME). The microcapsule delivery system had better water dispersion than the other two systems. Various microcapsules with a high LC contents as much as 40% and tunable sizes from 0.68 to 4.6μm were constructed by manipulating the process parameters. Compared with LC technical and commercial microcapsule formulation, the microcapsule systems showed a significantly sustained release of LC for a longer period. The LC release triggered by LC diffusion and matrix degradation could be optimally regulated by tuning LC contents and particle sizes of the microcapsules. This multi-regulated release capability is of great significance to achieve the precisely controlled release of pesticides. A preliminary bioassay against plutella xylostella revealed that 0.68μm LC-loaded microcapsules with good UV and thermal stability exhibited an activity similar to a commercial microcapsule formulation. These results demonstrated such an aqueous microcapsule delivery system had a great potential to be further explored for developing an effective and environmentally friendly pesticide-release formulation. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Phytochemical Screening and Preliminary Evaluation of Analgesic ...

    African Journals Online (AJOL)

    In this study, the methanolic root extract of Cissus polyantha was subjected to preliminary phytochemical screening, analgesic and anti-inflammatory studies. Phytochemical studies was carried out using standard phytochemical protocol while the analgesic studies was carried out using acetic acid-induced writhing tests in ...

  20. THE ANALGESIC EFFECTS OF CHENOPODIUM AMBROSIOIDES ...

    African Journals Online (AJOL)

    Aqueous extract of the leaf of Chenopodium ambrosides, a Nigeria traditional medicinal plant, has been evaluated for its analgesic potential in mice. The analgesic potential of the plant extract was studied using the thermal (hot plate) test. The plant extract was found effective at the dose of 0.4g/kg and 0.8g/kg in elevating ...

  1. Acute Metabolic Changes Associated With Analgesic Drugs

    DEFF Research Database (Denmark)

    Hansen, Tine Maria; Olesen, Anne Estrup; Simonsen, Carsten Wiberg

    2016-01-01

    BACKGROUND AND PURPOSE: Magnetic resonance spectroscopy (MRS) is used to measure brain metabolites. Limited data exist on the analgesic-induced spectroscopy response. This was an explorative study with the aims to investigate the central effects of two analgesic drugs, an opioid and a selective...

  2. Rhamnogalacturonan-I based microcapsules for targeted drug release

    DEFF Research Database (Denmark)

    Svagan, Anna J.; Kusic, Anja; De Gobba, Cristian

    2016-01-01

    Drug targeting to the colon via the oral administration route for local treatment of e.g. inflammatory bowel disease and colonic cancer has several advantages such as needle-free administration and low infection risk. A new source for delivery is plant-polysaccharide based delivery platforms...... such as Rhamnogalacturonan-I (RG-I). In the gastro-intestinal tract the RG-I is only degraded by the action of the colonic microflora. For assessment of potential drug delivery properties, RG-I based microcapsules (~1 μm in diameter) were prepared by an interfacial poly-addition reaction. The cross-linked capsules were...

  3. Analgesic principle from Curcuma amada.

    Science.gov (United States)

    Faiz Hossain, Chowdhury; Al-Amin, Mohammad; Rahman, Kazi Md Mahabubur; Sarker, Aurin; Alam, Md Mahamudul; Chowdhury, Mahmudul Hasan; Khan, Shamsun Nahar; Sultana, Gazi Nurun Nahar

    2015-04-02

    The rhizome of Curcuma amada has been used as a folk medicine for the treatment of rheumatic disorders in the northern part of Bangladesh and has also used for the treatment of inflammation and fever in the Ayurvedic and Unani systems of medicine. Aim of the study was to investigate the analgesic principle of the MeOH extract of the rhizome of Curcuma amada by an in vivo bioassay guided chromatographic separation and purification, and the structure elucidation of the purified compound by spectroscopic methods. Dried powder of Curcuma amada rhizomes was extracted with MeOH. The analgesic activity of the crude extract and its chromatographic fractions as well as the purified compound itself was evaluated by the acetic acid induced writhing method and the formalin induced licking test in Swiss albino mice. The MeOH extract was separated by chromatographic methods and the pure active compound was purified by crystallization in hexanes. The structure of the pure compound was then elucidated by spectroscopic methods. The MeOH extract of Curcuma amada exhibited 41.63% and 45.53% inhibitions in the acetic acid induced writhing method at doses of 200mg/kg and 400mg/kg, respectively. It also exerted 20.43% and 28.50% inhibitions in early phase at doses of 200mg/kg and 400mg/kg, respectively, and 30.41% and 42.95% inhibitions in late phase at doses of 200mg/kg and 400mg/kg, respectively in the formalin induced licking test. Vacuum Liquid Chromatography (VLC) of crude extract yielded five fractions and Fr. 1 was found to have the most potent analgesic activity with inhibitions of 36.96% in the acetic acid induced writhing method and 47.51% (early phase), 39.50% (late phase) in the formalin induced licking test at a dose of 200mg/kg. Column chromatography of Fr. 1 on silica gel generated seven fractions (SF. 1-SF. 7). SF. 2 showed the most potent activity with inhibition of 49.81% in the acetic acid induced writhing method at a dose of 100mg/kg. Crystallization of SF. 2 yielded

  4. Physicochemical characterization and biocompatibility of alginate-polycation microcapsules designed for islet transplantation

    Science.gov (United States)

    Tam, Susan Kimberly

    Microencapsulation represents a method for immunoprotecting transplanted therapeutic cells or tissues from graft rejection using a physical barrier. This approach is advantageous in that it eliminates the need to induce long-term immunosuppression and allows the option of transplanting non-cadaveric cell sources, such as animal cells and stem cell-derived tissues. The microcapsules that we have investigated are designed to immunoprotect islets of Langerhans (i.e. clusters of insulin-secreting cells), with the goal of treating insulin-dependent diabetes. With the aid of techniques for physicochemical analysis, this research focused on understanding which properties of the microcapsule are the most important for determining its biocompatibility. The objective of this work was to elucidate correlations between the chemical make-up, physicochemical properties, and in vivo biocompatibility of alginate-based microcapsules. Our approach was based on the hypothesis that the immune response to the microcapsules is governed by, and can therefore be controlled by, specific physicochemical properties of the microcapsule and its material components. The experimental work was divided into five phases, each associated with a specific aim : (1) To prove that immunoglobulins adsorb to the surface of alginate-polycation microcapsules, and to correlate this adsorption with the microcapsule chemistry. (2) To test interlaboratory reproducibility in making biocompatible microcapsules, and evaluate the suitability of our materials and fabrication protocols for subsequent studies. (3) To determine which physicochemical properties of alginates affect the in vivo biocompatibility of their gels. (4) To determine which physiochemical properties of alginate-polycation microcapsules are most important for determining their in vivo biocompatibility (5) To determine whether a modestly immunogenic membrane hinders or helps the ability of the microcapsule to immunoprotect islet xenografts in

  5. In-vitro analysis of APA microcapsules for oral delivery of live bacterial cells.

    Science.gov (United States)

    Chen, H; Ouyang, W; Jones, M; Haque, T; Lawuyi, B; Prakash, S

    2005-08-01

    Oral administration of microcapsules containing live bacterial cells has potential as an alternative therapy for several diseases. This article evaluates the suitability of the alginate-poly-L-lysine-alginate (APA) microcapsules for oral delivery of live bacterial cells, in-vitro, using a dynamic simulated human gastro-intestinal (GI) model. Results showed that the APA microcapsules were morphologically stable in the simulated stomach conditions, but did not retain their structural integrity after a 3-day exposure in simulated human GI media. The microbial populations of the tested bacterial cells and the activities of the tested enzymes in the simulated human GI suspension were not substantially altered by the presence of the APA microcapsules, suggesting that there were no significant adverse effects of oral administration of the APA microcapsules on the flora of the human gastrointestinal tract. When the APA microcapsules containing Lactobacillus plantarum 80 (LP80) were challenged in the simulated gastric medium (pH = 2.0), 80.0% of the encapsulated cells remained viable after a 5-min incubation; however, the viability decreased considerably (8.3%) after 15 min and dropped to 2.6% after 30 min and lower than 0.2% after 60 min, indicating the limitations of the currently obtainable APA membrane for oral delivery of live bacteria. Further in-vivo studies are required before conclusions can be made concerning the inadequacy of APA microcapsules for oral delivery of live bacterial cells.

  6. Perturbations of the flow induced by a microcapsule in a capillary tube

    Energy Technology Data Exchange (ETDEWEB)

    Gubspun, J; Deschamps, J; Georgelin, M; Leonetti, M [Aix-Marseille Université, CNRS, Centrale Marseille, IRPHE, UMR7342, F-13384, Marseille (France); Loubens, C de [Universite Grenoble Alpes, LRP, F-38000 Grenoble (France); Trozzo, R [Aix-Marseille Université, CNRS, Centrale Marseille, M2P2, UMR7340, F-13451, Marseille (France); Edwards-Levy, F, E-mail: leonetti@irphe.univ-mrs.fr [Institut de Chimie Moléculaire de Reims, UMR7312, CNRS-Université de Reims Champagne Ardenne, F-51100 Reims (France)

    2017-06-15

    Soft microcapsules moving in a cylindrical capillary deform from quasi-spherical shapes to elongated shapes with an inversion of curvature at the rear. We investigated the perturbation of the flow by particle tracking velocimetry around deformed microcapsules in confined flow. These experiments are completed by numerical simulations. Microcapsules are made of a thin membrane of polymerized human albumin and their shear elastic moduli are previously characterized in a cross flow chamber. Firstly, the velocity of the microcapsule can be calculated by theoretical predictions for rigid spheres, even for large deformations as ‘parachute-like’ shapes, if a relevant definition of the ratio of confinement is chosen. Secondly, at the rear and the front of the microcapsule, the existence of multiple recirculation regions is governed by the local curvature of the membrane. The amplitudes of these perturbations increase with the microcapsule deformation, whereas their axial extents are comparable to the radius of the capillary whatever the confinement and the capillary number. We conclude that whereas the motion of microcapsules in confined flow has quantitative similitudes with rigid spheres in terms of velocity and axial extent of the perturbation, their presence induces variations in the flow field that are related to the local deformation of the membrane as in droplets. (paper)

  7. Nozzleless Fabrication of Oil-Core Biopolymeric Microcapsules by the Interfacial Gelation of Pickering Emulsion Templates.

    Science.gov (United States)

    Leong, Jun-Yee; Tey, Beng-Ti; Tan, Chin-Ping; Chan, Eng-Seng

    2015-08-05

    Ionotropic gelation has been an attractive method for the fabrication of biopolymeric oil-core microcapsules due to its safe and mild processing conditions. However, the mandatory use of a nozzle system to form the microcapsules restricts the process scalability and the production of small microcapsules (microcapsules through ionotropic gelation at the interface of an O/W Pickering emulsion. This approach involves the self-assembly of calcium carbonate (CaCO3) nanoparticles at the interface of O/W emulsion droplets followed by the addition of a polyanionic biopolymer into the aqueous phase. Subsequently, CaCO3 nanoparticles are dissolved by pH reduction, thus liberating Ca(2+) ions to cross-link the surrounding polyanionic biopolymer to form a shell that encapsulates the oil droplet. We demonstrate the versatility of this method by fabricating microcapsules from different types of polyanionic biopolymers (i.e., alginate, pectin, and gellan gum) and water-immiscible liquid cores (i.e., palm olein, cyclohexane, dichloromethane, and toluene). In addition, small microcapsules with a mean size smaller than 100 μm can be produced by selecting the appropriate conventional emulsification methods available to prepare the Pickering emulsion. The simplicity and versatility of this method allows biopolymeric microcapsules to be fabricated with ease by ionotropic gelation for numerous applications.

  8. pH-Dependent Release of Insulin from Layer-by-Layer-Deposited Polyelectrolyte Microcapsules

    Directory of Open Access Journals (Sweden)

    Kentaro Yoshida

    2015-07-01

    Full Text Available Insulin-containing microcapsules were prepared by a layer-by-layer (LbL deposition of poly(allylamine hydrochloride (PAH and polyanions, such as poly(styrenesulfonate (PSS, poly(vinyl sulfate (PVS, and dextran sulfate (DS on insulin-containing calcium carbonate (CaCO3 microparticles. The CaCO3 core was dissolved in diluted HCl solution to obtain insulin-containing hollow microcapsules. The microcapsules were characterized by scanning electron microscope (SEM and atomic force microscope (AFM images and ζ-potential. The release of insulin from the microcapsules was faster at pH 9.0 and 7.4 than in acidic solutions due to the different charge density of PAH. In addition, insulin release was suppressed when the microcapsules were constructed using PAH with a lower molecular weight, probably owing to a thicker shell of the microcapsules. The results suggested a potential use of the insulin-containing microcapsules for developing insulin delivery systems.

  9. Modification of polyelectrolyte microcapsules into a container for the low molecular weight compounds

    Science.gov (United States)

    Goryacheva, O. A.; Gao, H.; Sukhorukov, G. B.

    2018-04-01

    Polyelectrolyte microcapsules are one of the most successful developments in the direction of target drug delivery. Nevertheless, to encapsulate low molecular weight compounds and to deliver the targeted drugs it is necessary to modify the surface of the microcapsules. Silica nanostructures obtained as result of hydrolysis of (3-Aminopropyl)- triethoxysilane (APTES) were used for the modification of the microcapsules. This material shows no toxic effect on cells and is capable of biodegradation. Amino-groups in the structure of APTES make it possible for further direct bioconjugation.

  10. Polyamide microcapsules containing jojoba oil prepared by inter-facial polymerization.

    Science.gov (United States)

    Persico, P; Carfagna, C; Danicher, L; Frere, Y

    2005-08-01

    Jojoba oil containing polyamide microcapsules having diameter of approximately 5 microm were prepared by inter-facial polycondensation by direct method (oil-in-water). Qualitative effects of both the formulation and the process parameters on microcapsules characteristics were investigated by SEM observations. Morphological analysis showed the dependence of the external membrane compactness on the chemical nature of the water-soluble polyamine and the oil-soluble acid polychloride: 1,6-hexamethylenediamine (HMDA) and terephthaloyl dichloride (TDC) were found to favour the production of smooth and dense surfaces. The use of ultrasonic irradiations during the dispersion step to get a further reduction of microcapsules size was also evaluated.

  11. Characterization of orange oil microcapsules for application in textiles

    Science.gov (United States)

    Rossi, W.; Bonet-Aracil, M.; Bou-Belda, E.; Gisbert-Payá, J.; Wilson, K.; Roldo, L.

    2017-10-01

    The use of orange oil presents as an ecological alternative to chemicals, attracting the attention of the scientific community to the development of eco-friendly antimicrobials. The microencapsulation technology has been used for the application of orange oil to textiles, being an economically viable, fast and efficient method by combining core and shell materials, desirable perceptual and functional characteristics, responsible for properties related to the nature of the product and provides that the wall materials release the functional substances in a controlled manner, in addition to effectively protecting and isolating the core material from the external environment to prevent its volatilization and deterioration, increasing the stability of the oil, such as non-toxicity. Thus, to better exploit the properties of the orange essential oil applied to textile products this study presents a characterization of microcapsules of Melamine formaldehyde obtained by the interfacial polymerization method with variations of proportions of orange oil (volatile) with fixed oil Medium-Chain Triglycerides (MCT) (non-volatile) to assist in the stability of the orange essential oil. Scanning electron microscope (SEM) was used as visualizing tool to characterize microparticles and surface morphology and thermal characteristics of microcapsules were premeditated by mean Differential scanning calorimetry (DSC).

  12. Layered lipid microcapsules for mesalazine delayed-release in children.

    Science.gov (United States)

    Balducci, Anna Giulia; Colombo, Gaia; Corace, Giuseppe; Cavallari, Cristina; Rodriguez, Lorenzo; Buttini, Francesca; Colombo, Paolo; Rossi, Alessandra

    2011-12-15

    The goal was to make available a delayed-release dosage form of mesalazine to be dispersed in water to facilitate swallowing in adults and children. Mesalazine microparticles containing carnauba wax were prepared by spray-congealing technique. A second step of spray-congealing of carnauba microparticles dispersed in liquefied stearic acid gave rise to mesalazine lipid microcapsules in which several carnauba microparticles remained embedded as cores in a reservoir structure. In order to favor their water dispersion, the lipid microcapsules were dry coated by tumbling them with different ratios of mannitol/lecithin microparticles prepared by spray-drying. Release rate measurements showed a delayed-release behavior, in particular a pH-dependence with less than 10% of drug released in acidic medium and complete release in phosphate buffer pH 7.4 in 4-5h. The layering with hydrophilic excipient microparticles allowed manufacturing of a pH-dependent dosage form suitable for extemporaneous oral use in adults and children. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. High-Throughput Platform for Synthesis of Melamine-Formaldehyde Microcapsules.

    Science.gov (United States)

    Çakir, Seda; Bauters, Erwin; Rivero, Guadalupe; Parasote, Tom; Paul, Johan; Du Prez, Filip E

    2017-07-10

    The synthesis of microcapsules via in situ polymerization is a labor-intensive and time-consuming process, where many composition and process factors affect the microcapsule formation and its morphology. Herein, we report a novel combinatorial technique for the preparation of melamine-formaldehyde microcapsules, using a custom-made and automated high-throughput platform (HTP). After performing validation experiments for ensuring the accuracy and reproducibility of the novel platform, a design of experiment study was performed. The influence of different encapsulation parameters was investigated, such as the effect of the surfactant, surfactant type, surfactant concentration and core/shell ratio. As a result, this HTP-platform is suitable to be used for the synthesis of different types of microcapsules in an automated and controlled way, allowing the screening of different reaction parameters in a shorter time compared to the manual synthetic techniques.

  14. Low-magnetization magnetic microcapsules: A synergistic theranostic platform for remote cancer cells therapy and imaging

    KAUST Repository

    Zhang, Wei; Deng, Lin; Wang, Guangchao; Guo, Xianrong; Li, Qiujin; Zhang, Jianfei; Khashab, Niveen M.

    2014-01-01

    Multifunctional magnetic microcapsules (MMCs) for the combined cancer cells hyperthermia and chemotherapy in addition to MR imaging are successfully developed. A classical layer-by-layer technique of oppositely charged polyelectrolytes (poly

  15. Dexamethasone prolongs local analgesia after subcutaneous infiltration of bupivacaine microcapsules in human volunteers

    DEFF Research Database (Denmark)

    Holte, Kathrine; Werner, Mads U; Lacouture, Peter G

    2002-01-01

    BACKGROUND: The addition of small amounts of dexamethasone to extended-release formulations of bupivacaine in microcapsules has been found to prolong local analgesia in experimental studies, but no clinical data are available. METHODS: In a double-blinded study, 12 healthy male volunteers were...... randomized to receive simultaneous subcutaneous injections of bupivacaine microcapsules with dexamethasone and bupivacaine microcapsules without dexamethasone in each calf. Local analgesia was assessed with a validated human pain model; main parameters evaluated were thermal, mechanical, and pain detection...... curve [AUC]) were considered best estimate of analgesia. Safety evaluations were performed daily for the first week and at 2 weeks, 6 weeks, and 6 months after injection. RESULTS: The addition of dexamethasone significantly prolonged local analgesia of bupivacaine microcapsules without influence...

  16. Development of Cellulose Acetate Microcapsules with Cyanex 923 for Phenol Removal from Aqueous Media

    Directory of Open Access Journals (Sweden)

    Irma Pérez-Silva

    2018-01-01

    Full Text Available Microcapsules of cellulose acetate with Cyanex 923 were prepared and used in this study for phenol removal from water and synthetic textile wastewater. The influence of several factors on the microcapsules extraction efficiency was studied, as well as characterization and phenol adsorption isotherm. Microcapsules characterization demonstrated the extractant reagent encapsulation, while in a batch mode procedure, good adsorption of phenol (ca. 5.5 × 10−3 mol Kg−1 has been reached. A slight decrease in phenol extraction percentage was obtained when synthetic textile wastewater was used (ca. 4.955 × 10−3 mol Kg−1, although a decrease in color was observed due to dye microcapsule extraction. Results indicate that this method is a promising alternative to conventional phenol removal technologies for aqueous samples of low phenol concentrations or in textile effluents.

  17. Fabrication of triple-labeled polyelectrolyte microcapsules for localized ratiometric pH sensing.

    Science.gov (United States)

    Song, Xiaoxue; Li, Huanbin; Tong, Weijun; Gao, Changyou

    2014-02-15

    Encapsulation of pH sensitive fluorophores as reporting molecules provides a powerful approach to visualize the transportation of multilayer capsules. In this study, two pH sensitive dyes (fluorescein and oregon green) and one pH insensitive dye (rhodamine B) were simultaneously labeled on the microcapsules to fabricate ratiometric pH sensors. The fluorescence of the triple-labeled microcapsule sensors was robust and nearly independent of other intracellular species. With a dynamic pH measurement range of 3.3-6.5, the microcapsules can report their localized pH at a real time. Cell culture experiments showed that the microcapsules could be internalized by RAW 246.7 cells naturally and finally accumulated in acidic organelles with a pH value of 5.08 ± 0.59 (mean ± s.d.; n=162). Copyright © 2013 Elsevier Inc. All rights reserved.

  18. Robust synthesis of epoxy resin-filled microcapsules for application to self-healing materials.

    Science.gov (United States)

    Bolimowski, Patryk A; Bond, Ian P; Wass, Duncan F

    2016-02-28

    Mechanically and thermally robust microcapsules containing diglycidyl ether bisphenol A-based epoxy resin and a high-boiling-point organic solvent were synthesized in high yield using in situ polymerization of urea and formaldehyde in an oil-in-water emulsion. Microcapsules were characterized in terms of their size and size distribution, shell surface morphology and thermal resistance to the curing cycles of commercially used epoxy polymers. The size distribution of the capsules and characteristics such as shell thickness can be controlled by the specific parameters of microencapsulation, including concentrations of reagents, stirrer speed and sonication. Selected microcapsules, and separated core and shell materials, were analysed using thermogravimetric analysis and differential scanning calorimetry. It is demonstrated that capsules lose minimal 2.5 wt% at temperatures no higher than 120°C. These microcapsules can be applied to self-healing carbon fibre composite structural materials, with preliminary results showing promising performance. © 2016 The Author(s).

  19. Preparation of n-tetradecane-containing microcapsules with different shell materials by phase separation method

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Rui [Department of Chemical Engineering, Tsinghua University, Beijing (China); Zhang, Yan; Zhang, Qingwu [Department of Chemical Engineering, China University of Mining and Technology, Beijing (China); Wang, Xin; Zhang, Yinping [Department of Building Science, Tsinghua University, Beijing (China)

    2009-10-15

    Microcapsules for thermal energy storage and heat-transfer enhancement have attracted great attention. Microencapsulation of n-tetradecane with different shell materials was carried out by phase separation method in this paper. Acrylonitrile-styrene copolymer (AS), acrylonitrile-styrene-butadiene copolymer (ABS) and polycarbonate (PC) were used as the shell materials. The structures, morphologies and the thermal capacities of the microcapsules were characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The ternary phase diagrams showed the potential encapsulation capabilities of the three shell materials. The effects of the shell/core ratio and the molecular weight of the shell material on the encapsulation efficiency and the thermal capacity of the microcapsules were also discussed. Microcapsules with melting enthalpy > 100 J/g, encapsulation efficiency 66-75%, particle size<1 {mu}m were obtained for all three shell materials. (author)

  20. antipyretic and analgesic activities of sphenoceutrum jollyanum

    African Journals Online (AJOL)

    The petroleum ether and methanol extracts of Sphenoceutrum jollyanum leaves possess significant in vitro analgesstic and antipyretic activities. Key Words: Sphenocentrum jollyanum, Menispermaceae, analgesic activity, antipyretic activity. Nig. J. Nat. Prod. And Med. Vol.2 1998: 52-53 ...

  1. Encapsulating acetaminophen into poly(L-lactide) microcapsules by solvent-evaporation technique in an O/W emulsion.

    Science.gov (United States)

    Lai, M-K; Tsiang, R C-C

    2004-05-01

    Microencapsulation of acetaminophen in poly(L-lactide) was studied using the oil-in-water emulsification solvent-evaporation technique. Methylene chloride was used as the dispersed medium and water as the dispersing medium. The thermogravimetric analysis and differential scanning calorimetry data indicated that the acetaminophen was encapsulated and uniformly distributed in the poly(L-lactide) microcapsules. The addition of either gelatin or polyvinyl alcohol as the protective colloid to the emulsion was found to have a significant impact on the resulting microcapsules. Increasing the concentration of either protective colloid in the dispersing medium increased the recovery and the release rate of acetaminophen, but reduced the particle size and loading efficiency of the microcapsules. Scanning electron micrographs manifested that all the microcapsules attained a nearly round shape. While gelatin imparted a smooth topography to the surface of the microcapsules, PVA made the surface of the microcapsules bumpy and humped.

  2. Preparation and Characterization of Silicone Liquid Core/Polymer Shell Microcapsules via Internal Phase Separation

    DEFF Research Database (Denmark)

    Gonzalez, Lidia; Kostrzewska, Malgorzata; Ma, Baoguang

    2014-01-01

    Microcapsules with a silicone liquid core surrounded by a polymeric shell were synthesisedthrough the controlled phase separation. The dispersed silicone phase consisted of the shellpolymer PMMA, a good solvent for the PMMA (dichloromethane, DCM) and a poor solvent(methylhydrosiloxane dimethylsil......Microcapsules with a silicone liquid core surrounded by a polymeric shell were synthesisedthrough the controlled phase separation. The dispersed silicone phase consisted of the shellpolymer PMMA, a good solvent for the PMMA (dichloromethane, DCM) and a poor solvent...

  3. Release of volatile compounds from polymeric microcapsules mediated by photocatalytic nanoparticles

    OpenAIRE

    Marques, Juliana Filipa Gouveia; Oiveira, L. Filipa; Pinto, Renato; Coutinho, Paulo J. G.; Parpot, Pier; Gois, J. R.; Coelho, J. F. J.; Magalhães, F. D.; Tavares, C. J.

    2013-01-01

    In this study we propose a suitable method for the solar-activated controlled release of volatile compounds from polymeric microcapsules bonded with photocatalytic nanoparticles. These reservoirs can find applications, for example, in the controlled release of insecticides, repellents, or fragrances, amongst other substances. The surfaces of the microcapsules have been functionalized with TiO2 nanoparticles.Upon ultraviolet irradiation, redox mechanisms are initiated on the semicondu...

  4. Manufacturing of microcapsules with liquid core and their healing performance in epoxy for resin transfer molding

    OpenAIRE

    Yılmaz, Çağatay; Yilmaz, Cagatay

    2013-01-01

    Microcapsules with different active core materials have been receiving a great deal of attention for developing polymer based materials with selfhealing abilities. The self-healing ability is crucial in particular for matrix materials having brittle nature such as epoxy resin. In order for abstaining from an abrupt failure of structural brittle manner polymeric materials, microcapsules can be used excellently as a viable repair agent. In this work, we present a study on the catalyst-free micr...

  5. Effect of epoxy resin and hardener containing microcapsules on healing efficiency of epoxy adhesive based metal joints

    International Nuclear Information System (INIS)

    Khan, Nazrul Islam; Halder, Sudipta; Goyat, M.S.

    2016-01-01

    Dual component microcapsules of epoxy resin and polyamine hardener with polymethyl methacrylate (PMMA) shell were synthesized using a water-oil-water emulsion solvent evaporation method. The high concentration of sodium dodecyl sulfate (SDS) was used to reduce the thickness of shell wall of dual component microcapsules. The dual microcapsules of 1:1 weight ratio were introduced in the epoxy adhesive to study the healing effect. The morphology, chemical structure and thermal characteristics of the microcapsules were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), respectively. The insertion of dual component microcapsules in epoxy matrix reduced the lap shear strength of adhesive joints, which may be attributed to the generation of stress concentration cites because of micron sized capsules. However, the extension and absorbed failure energy of adhesive joints under uniaxial loading increased with the increase of concentration of dual microcapsules. The viscoelastic nature of the dual microcapsules may be responsible for this enhancement. Significant enhancement in the healing efficiency (90.93%) of the joints was achieved for 10 wt% of dual microcapsules. The crack pinning and crack blunting mechanisms at the vicinity of the crack path adjacent to the microcapsules were found responsible for significant enhancement in the healing efficiency of the adhesive joints. - Highlights: • High SDS concentration was used to control the dual component microcapsules shell wall thickness. • Self-healing performance of dual component microcapsules reinforced epoxy adhesive based single lap joints was studied. • 90.93% of the damage healing was achieved for self-healing adhesive based single lap joints. • Increase in concentration of microcapsules reduces the lap shear properties of the self-healing joints.

  6. Effect of epoxy resin and hardener containing microcapsules on healing efficiency of epoxy adhesive based metal joints

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Nazrul Islam [Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar 788010, Assam (India); Halder, Sudipta, E-mail: shalder@nits.ac.in [Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar 788010, Assam (India); Goyat, M.S. [Department of Physics, University of Petroleum & Energy Studies, Dehradun, Uttarakhand 248007 (India)

    2016-03-01

    Dual component microcapsules of epoxy resin and polyamine hardener with polymethyl methacrylate (PMMA) shell were synthesized using a water-oil-water emulsion solvent evaporation method. The high concentration of sodium dodecyl sulfate (SDS) was used to reduce the thickness of shell wall of dual component microcapsules. The dual microcapsules of 1:1 weight ratio were introduced in the epoxy adhesive to study the healing effect. The morphology, chemical structure and thermal characteristics of the microcapsules were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), respectively. The insertion of dual component microcapsules in epoxy matrix reduced the lap shear strength of adhesive joints, which may be attributed to the generation of stress concentration cites because of micron sized capsules. However, the extension and absorbed failure energy of adhesive joints under uniaxial loading increased with the increase of concentration of dual microcapsules. The viscoelastic nature of the dual microcapsules may be responsible for this enhancement. Significant enhancement in the healing efficiency (90.93%) of the joints was achieved for 10 wt% of dual microcapsules. The crack pinning and crack blunting mechanisms at the vicinity of the crack path adjacent to the microcapsules were found responsible for significant enhancement in the healing efficiency of the adhesive joints. - Highlights: • High SDS concentration was used to control the dual component microcapsules shell wall thickness. • Self-healing performance of dual component microcapsules reinforced epoxy adhesive based single lap joints was studied. • 90.93% of the damage healing was achieved for self-healing adhesive based single lap joints. • Increase in concentration of microcapsules reduces the lap shear properties of the self-healing joints.

  7. Fabrication of yttria microcapsules for radiotherapy from water/oil emulsion

    International Nuclear Information System (INIS)

    Miyazaki, Toshiki; Kai, Tomohiro; Ishida, Eiichi; Kawashita, Masakazu; Hiraoka, Masahiro

    2010-01-01

    Radiotherapy using ceramic microparticles that act as β-emitters after neutron bombardment is attractive as a minimally invasive option for cancer treatment. Yttria (Y 2 O 3 ) microcapsules (20-30 μm in diameter) are capable of cutting off the nutrition supply in cancer cells through an embolization effect. In the present study, Y 2 O 3 microcapsules were prepared via precipitation of yttrium hydroxide from a water/oil (W/O) emulsion and a subsequent heat treatment. The emulsion was prepared by dispersing yttrium hydroxide sol in 2-ethyl-1-hexanol. Microcapsules were obtained by an addition of the emulsion in butanol via dehydration and subsequent aggregation of the yttrium hydroxide. The effects of the rotation speed and surfactant concentration on the diameter of the particles were investigated. The diameter of the microcapsules showed a tendency to decrease with increases in rotation speed during emulsion preparation or surfactant concentration in the oil phase. A high yield of the Y 2 O 3 microcapsules with a diameter of 20-30 μm were obtained after a heat treatment at the optimized rotation speed and surfactant concentration. The obtained microcapsules showed high chemical durability in a simulated body environment. (author)

  8. Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules

    Energy Technology Data Exchange (ETDEWEB)

    Ghazali, Habibah; Ye, Lin [Centre for Advanced Materials Technology (CAMT), School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW 2006 (Australia); Zhang, Ming-Qiu [Key Laboratory of Polymeric Composite and Functional Materials of Ministry of Education, Zhongshan University, Guangzhou 510275 (China)

    2016-03-09

    The aim of this work is to develop a self-healing polymeric adhesive formulation with epoxy/mercaptan microcapsules. Epoxy/mercaptan microcapsules were dispersed into a commercialize two-part epoxy adhesive for developing self-healing epoxy adhesive. The influence of different content of microcapsules on the shear strength and healing capability of epoxy adhesive were investigated using single-lap-joints with average thickness of adhesive layer of about 180 µm. This self-healing adhesive was used in bonding of 5000 series aluminum alloys adherents after mechanical and alkaline cleaning surface treatment. The adhesion strength was measured and presented as function of microcapsules loading. The results indicated that the virgin lap shear strength was increased by about 26% with addition of 3 wt% of self-healing microcapsules. 12% to 28% recovery of the shear strength is achieved after self-healing depending on the microcapsules content. Scanning electron microscopy was used to study fracture surface of the joints. The self-healing adhesives exhibit recovery of both cohesion and adhesion properties with room temperature healing.

  9. Direct encapsulation of water-soluble drug into silica microcapsules for sustained release applications

    International Nuclear Information System (INIS)

    Wang Jiexin; Wang Zhihui; Chen Jianfeng; Yun, Jimmy

    2008-01-01

    Direct encapsulation of water-soluble drug into silica microcapsules was facilely achieved by a sol-gel process of tetraethoxysilane (TEOS) in W/O emulsion with hydrochloric acid (HCl) aqueous solution containing Tween 80 and drug as well as cyclohexane solution containing Span 80. Two water-soluble drugs of gentamicin sulphate (GS) and salbutamol sulphate (SS) were chosen as model drugs. The characterization of drug encapsulated silica microcapsules by scanning electronic microscopy (SEM), FTIR, thermogravimetry (TG) and N 2 adsorption-desorption analyses indicated that drug was successfully entrapped into silica microcapsules. The as-prepared silica microcapsules were uniform spherical particles with hollow structure, good dispersion and a size of 5-10 μm, and had a specific surface area of about 306 m 2 /g. UV-vis and thermogravimetry (TG) analyses were performed to determine the amount of drug encapsulated in the microcapsules. The BJH pore size distribution (PSD) of silica microcapsules before and after removing drug was examined. In vitro release behavior of drug in simulated body fluid (SBF) revealed that such system exhibited excellent sustained release properties

  10. Effects of Preparation Conditions on the Yield and Embedding Ratio of Vinyl Silicone Oil Microcapsules

    Directory of Open Access Journals (Sweden)

    Aijie MA

    2016-05-01

    Full Text Available Self-healing materials could repair themselves without external influences when they are damaged. In this paper, microcapsules are prepared by in-situ polymerization method with vinyl silicone oil as core material, polyurea formaldehyde (PUF as wall material and polyvinyl alcohol as dispersants. The morphology and structure of the microcapsules are tested with scanning electron microscopy (SEM, polarizing microscope(PM)and laser particle analyzer(LPA. Effect of the reaction temperature, stirring speed and PVA concentration on the yield, embedding ratio, particle size and distribution of the microcapsules are studied. Results show that the microcapsules can be successfully prepared by in situ polymerization method. When the reaction temperature was 60℃, the stirring speed 1000 r/min, dispersant concentration 0.1%, the yield and embedding ratio of the microcapsule are 52.5% and 50.1%. The microcapsules prepared have smooth surface, well dispersibility, narrow particle size distribution and the average particle size is 13 μm.DOI: http://dx.doi.org/10.5755/j01.ms.22.2.13026

  11. Melamine-formaldehyde microcapsules filled sappan dye modified polypropylene composites: encapsulation and thermal properties

    Science.gov (United States)

    Phanyawong, Suphitcha; Siengchin, Suchart; Parameswaranpillai, Jyotishkumar; Asawapirom, Udom; Polpanich, Duangporn

    2018-01-01

    Sappan dye, a natural dye extracted from sappan wood is widely used in cosmetics, textile dyeing and as food additives. However, it was recognized that natural dyes cannot withstand high temperature. In this study, a protective coating of melamine-formaldehyde shell material was applied over the sappan dye to improve its thermal stability. The percentage of sappan dye used in the microencapsulation was 30, 40, 50, 60 and 70 wt%. The color, shape, size, and thermal stability of sappan dye microcapsules were investigated. It was found that increasing amount of sappan dye content in the microcapsules decreased the particle size. Thermal analysis reveals that the melamine-formaldehyde resin served as an efficient protective shell for sappan dye. Besides, 30 wt% sappan dye microcapsules with different weight percent (1, 3 and 5 wt%) of sappan dye was used as modifier for polypropylene (PP). All the prepared composites are red in color which supports the thermal stability of the microcapsules. The changes in crystallinity and melting behavior of PP by the addition of microcapsules were studied in detail by differential scanning calorimetry. Thermogravimetric studies showed that the thermal stability of PP composites increased by the addition of microcapsules.

  12. Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules

    International Nuclear Information System (INIS)

    Ghazali, Habibah; Ye, Lin; Zhang, Ming-Qiu

    2016-01-01

    The aim of this work is to develop a self-healing polymeric adhesive formulation with epoxy/mercaptan microcapsules. Epoxy/mercaptan microcapsules were dispersed into a commercialize two-part epoxy adhesive for developing self-healing epoxy adhesive. The influence of different content of microcapsules on the shear strength and healing capability of epoxy adhesive were investigated using single-lap-joints with average thickness of adhesive layer of about 180 µm. This self-healing adhesive was used in bonding of 5000 series aluminum alloys adherents after mechanical and alkaline cleaning surface treatment. The adhesion strength was measured and presented as function of microcapsules loading. The results indicated that the virgin lap shear strength was increased by about 26% with addition of 3 wt% of self-healing microcapsules. 12% to 28% recovery of the shear strength is achieved after self-healing depending on the microcapsules content. Scanning electron microscopy was used to study fracture surface of the joints. The self-healing adhesives exhibit recovery of both cohesion and adhesion properties with room temperature healing.

  13. pH-controlled drug loading and release from biodegradable microcapsules.

    Science.gov (United States)

    Zhao, Qinghe; Li, Bingyun

    2008-12-01

    Microcapsules made of biopolymers are of both scientific and technological interest and have many potential applications in medicine, including their use as controlled drug delivery devices. The present study makes use of the electrostatic interaction between polycations and polyanions to form a multilayered microcapsule shell and also to control the loading and release of charged drug molecules inside the microcapsule. Micron-sized calcium carbonate (CaCO3) particles were synthesized and integrated with chondroitin sulfate (CS) through a reaction between sodium carbonate and calcium nitrate tetrahydrate solutions suspended with CS macromolecules. Oppositely charged biopolymers were alternately deposited onto the synthesized particles using electrostatic layer-by-layer self-assembly, and glutaraldehyde was introduced to cross-link the multilayered shell structure. Microcapsules integrated with CS inside the multilayered shells were obtained after decomposition of the CaCO3 templates. The integration of a matrix (i.e., CS) permitted the subsequent selective control of drug loading and release. The CS-integrated microcapsules were loaded with a model drug, bovine serum albumin labeled with fluorescein isothiocyanate (FITC-BSA), and it was shown that pH was an effective means of controlling the loading and release of FITC-BSA. Such CS-integrated microcapsules may be used for controlled localized drug delivery as biodegradable devices, which have advantages in reducing systemic side effects and increasing drug efficacy.

  14. Silk sericin-alginate-chitosan microcapsules: hepatocytes encapsulation for enhanced cellular functions.

    Science.gov (United States)

    Nayak, Sunita; Dey, Sanchareeka; Kundu, Subhas C

    2014-04-01

    The encapsulation based technology permits long-term delivery of desired therapeutic products in local regions of body without the need of immunosuppressant drugs. In this study microcapsules composed of sericin and alginate micro bead as inner core and with an outer chitosan shell are prepared. This work is proposed for live cell encapsulation for potential therapeutic applications. The sericin protein is obtained from cocoons of non-mulberry silkworm Antheraea mylitta. The sericin-alginate micro beads are prepared via ionotropic gelation under high applied voltage. The beads further coated with chitosan and crosslinked with genipin. The microcapsules developed are nearly spherical in shape with smooth surface morphology. Alamar blue assay and confocal microscopy indicate high cell viability and uniform encapsulated cell distribution within the sericin-alginate-chitosan microcapsules indicating that the microcapsules maintain favourable microenvironment for the cells. The functional analysis of encapsulated cells demonstrates that the glucose consumption, urea secretion rate and intracellular albumin content increased in the microcapsules. The study suggests that the developed sericin-alginate-chitosan microcapsule contributes towards the development of cell encapsulation model. It also offers to generate enriched population of metabolically and functionally active cells for the future therapeutics especially for hepatocytes transplantation in acute liver failure. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Next-Generation Theranostic Agents Based on Polyelectrolyte Microcapsules Encoded with Semiconductor Nanocrystals: Development and Functional Characterization

    Science.gov (United States)

    Nifontova, Galina; Zvaigzne, Maria; Baryshnikova, Maria; Korostylev, Evgeny; Ramos-Gomes, Fernanda; Alves, Frauke; Nabiev, Igor; Sukhanova, Alyona

    2018-01-01

    Fabrication of polyelectrolyte microcapsules and their use as carriers of drugs, fluorescent labels, and metal nanoparticles is a promising approach to designing theranostic agents. Semiconductor quantum dots (QDs) are characterized by extremely high brightness and photostability that make them attractive fluorescent labels for visualization of intracellular penetration and delivery of such microcapsules. Here, we describe an approach to design, fabricate, and characterize physico-chemical and functional properties of polyelectrolyte microcapsules encoded with water-solubilized and stabilized with three-functional polyethylene glycol derivatives core/shell QDs. Developed microcapsules were characterized by dynamic light scattering, electrophoretic mobility, scanning electronic microscopy, and fluorescence and confocal microscopy approaches, providing exact data on their size distribution, surface charge, morphological, and optical characteristics. The fluorescence lifetimes of the QD-encoded microcapsules were also measured, and their dependence on time after preparation of the microcapsules was evaluated. The optimal content of QDs used for encoding procedure providing the optimal fluorescence properties of the encoded microcapsules was determined. Finally, the intracellular microcapsule uptake by murine macrophages was demonstrated, thus confirming the possibility of efficient use of developed system for live cell imaging and visualization of microcapsule transportation and delivery within the living cells.

  16. Development of hydrocortisone succinic acid/and 5-fluorouracil/chitosan microcapsules for oral and topical drug deliveries.

    Science.gov (United States)

    Lam, Pik-Ling; Lee, Kenneth Ka-Ho; Wong, Raymond Siu-Ming; Cheng, Gregory Yin Ming; Cheng, Shuk Yan; Yuen, Marcus Chun-Wah; Lam, Kim-Hung; Gambari, Roberto; Kok, Stanton Hon-Lung; Chui, Chung-Hin

    2012-05-01

    Recently, we demonstrated the safety use of calendula oil/chitosan microcapsules as a carrier for both oral and topical deliveries. We also reported the improved biological activity towards skin cells and Staphylococcus aureus of phyllanthin containing chitosan microcapsules. However, the possibility of both oral and topical applications was still necessary to be further studied. Here we investigated that both oral and topical applications of chitosan-based microcapsules were tested using hydrocortisone succinic acid (HSA) and 5-fluorouracil (5-FU), respectively. The drug loading efficiency, particle size, surface morphology and chemical compositions of both drug loaded microcapsules were confirmed by UV-vis spectrophotometer, particle size analyzer, scanning electron microscope and Fourier transform infrared spectroscopy. The in vitro release studies revealed that both HSA and 5-FU could be released form chitosan microcapsules. The mean adrenocorticotropic hormone concentration in HSA loaded microcapsule mice plasma was detected to be lower than that of water control. One hundred micrograms per milliliter of 5-FU containing microcapsules exhibited a stronger growth inhibition towards skin keratinocytes than that of free 5-FU. In vitro drug delivery model demonstrated the delivery of 5-FU from microcapsule treated textiles into nude mice skin. Further uses of the drug loaded microcapsules may provide an efficiency deliverable tool for both oral and topical applications. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Progesterone release from magnetic alginate/chitosan microcapsules

    Energy Technology Data Exchange (ETDEWEB)

    Leite, Melina Vasconcelos; Castro, Mayara de Freitas e; Sanchez Rodriguez, Ruben J., E-mail: sanchez@uenf.br [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacazes, RJ (Brazil); Rojas-Ayala, Chachi; Baggio-Saitovitch, Elisa Maria [Centro Brasileiro de Pesquisa Fisicas (CBPF), Rio de Janeir, RJ (Brazil)

    2015-07-01

    Magnetite nanoparticles (Fe{sub 3}O{sub 4}) were prepared using the hydrothermal method (160°C) in a closed system and characterized with the aid of the techniques of X-ray Diffraction patterns (DRX), Mössbauer spectroscopy and Vibrating Sample Magnetometer (VSM). The Fe{sub 3}O{sub 4} phase showed high crystallinity and medium crystallite size of 19nm with superparamagnetic properties, reversible behavior and saturation magnetization of 43 emu g{sup -1}. The nanoparticles coated with alginate / chitosan were characterized morphologically by Scanning and Transmission Electron Microscope. The microcapsules have a regular spherical shape with the main contribution of the size distribution in the range of 34-53μm. The progesterone released was 14% higher when external magnetic field was applied. (author)

  18. Motion Control of Urea-Powered Biocompatible Hollow Microcapsules.

    Science.gov (United States)

    Ma, Xing; Wang, Xu; Hahn, Kersten; Sánchez, Samuel

    2016-03-22

    The quest for biocompatible microswimmers powered by compatible fuel and with full motion control over their self-propulsion is a long-standing challenge in the field of active matter and microrobotics. Here, we present an active hybrid microcapsule motor based on Janus hollow mesoporous silica microparticles powered by the biocatalytic decomposition of urea at physiological concentrations. The directional self-propelled motion lasts longer than 10 min with an average velocity of up to 5 body lengths per second. Additionally, we control the velocity of the micromotor by chemically inhibiting and reactivating the enzymatic activity of urease. The incorporation of magnetic material within the Janus structure provides remote magnetic control on the movement direction. Furthermore, the mesoporous/hollow structure can load both small molecules and larger particles up to hundreds of nanometers, making the hybrid micromotor an active and controllable drug delivery microsystem.

  19. Progesterone release from magnetic alginate/chitosan microcapsules

    International Nuclear Information System (INIS)

    Leite, Melina Vasconcelos; Castro, Mayara de Freitas e; Sanchez Rodriguez, Ruben J.; Rojas-Ayala, Chachi; Baggio-Saitovitch, Elisa Maria

    2015-01-01

    Magnetite nanoparticles (Fe_3O_4) were prepared using the hydrothermal method (160°C) in a closed system and characterized with the aid of the techniques of X-ray Diffraction patterns (DRX), Mössbauer spectroscopy and Vibrating Sample Magnetometer (VSM). The Fe_3O_4 phase showed high crystallinity and medium crystallite size of 19nm with superparamagnetic properties, reversible behavior and saturation magnetization of 43 emu g"-"1. The nanoparticles coated with alginate / chitosan were characterized morphologically by Scanning and Transmission Electron Microscope. The microcapsules have a regular spherical shape with the main contribution of the size distribution in the range of 34-53μm. The progesterone released was 14% higher when external magnetic field was applied. (author)

  20. Zinc oxide microcapsules obtained via a bio-inspired approach

    International Nuclear Information System (INIS)

    Lipowsky, Peter; Hirscher, Michael; Hoffmann, Rudolf C; Bill, Joachim; Aldinger, Fritz

    2007-01-01

    Hollow zinc oxide microcapsules have been synthesized by a sacrificial template route involving the chemical bath deposition of nanostructured zinc oxide thin films on sulfonate-modified polystyrene microspheres and subsequent removal of the polymer core by dissolution in a solvent or by thermolysis. Scanning electron micrographs show that uniform coating of the templates is achieved when ZnO is deposited from a solution containing zinc acetate, the polymer polyvinylpyrrolidone, and a base in methanol, and that the ZnO shells remain intact after removal of the cores. A focused ion beam is used to cut slices from the spheres and demonstrate their inner morphology and hollowness. X-ray diffraction yields evidence that the shells consist of nanocrystalline ZnO with the zincite structure

  1. Microthermogravimetry of a single microcapsule using silicon microresonators.

    Science.gov (United States)

    Lee, Dongkyu; Park, Yongbeom; Cho, Soo Hyoun; Yoo, Myungsun; Jung, Namchul; Yun, Minhyuk; Ko, Wooree; Jeon, Sangmin

    2010-07-01

    A chlorobenzene-containing polyurethane microcapsule was placed on the free end of a silicon cantilever, and the temperature dependence of the resonance frequency was measured. As the cantilever was heated, the resonance frequency showed steplike increases at 109 and 270 degrees C that were due to the rupture of the capsule and the thermal degradation of the polyurethane shell, respectively. The frequency changes due to the rupture of a single capsule measured by the cantilever were much sharper than the transitions measured by conventional thermogravimetric analysis (TGA), which measures the average mass change of a collection of capsules characterized by a large size distribution. When two capsules were placed on the cantilever, their individual rupture temperatures could be clearly identified. In addition, the permeability of the polyurethane shell, with respect to chlorobenzene, was measured, and the rupture temperature was observed to decrease with increasing permeability.

  2. Bubble-cell interactions with laser-activated polymeric microcapsules

    Science.gov (United States)

    Versluis, Michel; Lajoinie, Guillaume; van Rooij, Tom; Skachkov, Ilya; Kooiman, Klazina; de Jong, Nico; Physics of Fluids Group, University of Twente Team; Biomedical Engineering, Erasmus MC Team

    2015-11-01

    Polymeric microcapsules that are made light-absorbing by the addition of a dye in their shell can generate cavitation microbubbles with spatiotemporal control when irradiated by a pulsed laser. These particles less than 3 μm in size can circulate through the body, bind to tissues and are expected to be readily detected, even if a single cavitation bubble is produced. In this paper, we study the impact of such cavitation bubbles on a cell monolayer and quantify it in terms of cell poration and cell viability. Two capsules formulations were used; the first one encapsulates a low boiling point oil and induced less cell damage than the second that was loaded with a high boiling point oil. We also report the generation of stable bubbles by the first capsule formulation that completely absorb the cells in their close vicinity. Physics of Fluid group MIRA Institute for Biomedical Technology and Technical Medicine MESA+ Institute for Nanotechnology.

  3. Chitosan/dextran multilayer microcapsules for polyphenol co-delivery

    Energy Technology Data Exchange (ETDEWEB)

    Paini, Marco, E-mail: marco.paini@unige.it [Department of Civil, Chemical and Environmental Engineering, University of Genoa, via Opera Pia 15, 16145 Genoa (Italy); Research Center for Biologically Inspired Engineering in Vascular Medicine and Longevity (BELONG), Via Montallegro 1, 16145 Genoa (Italy); Aliakbarian, Bahar; Casazza, Alessandro A.; Perego, Patrizia [Department of Civil, Chemical and Environmental Engineering, University of Genoa, via Opera Pia 15, 16145 Genoa (Italy); Research Center for Biologically Inspired Engineering in Vascular Medicine and Longevity (BELONG), Via Montallegro 1, 16145 Genoa (Italy); Ruggiero, Carmelina; Pastorino, Laura [Department of Informatics, Bioengineering, Robotics and Systems Engineering, University of Genoa, Via Opera Pia 13, 16145 Genoa (Italy)

    2015-01-01

    Polysaccharide-based nanostructured polymeric microcapsules were fabricated by the electrostatic layer-by-layer self-assembly technique and used to encapsulate mixtures of four different polyphenols in order to achieve their controlled release. The real-time fabrication of the dextran/chitosan multilayer was monitored by quartz crystal microbalance with dissipation monitoring, and the morphology of the nanostructured polymeric capsules was characterized by scanning electron microscopy. The polyphenol encapsulation was obtained by reversible permeability variation of the capsule shell in ethanol:water mixtures. The loading efficiency in different water:ethanol mixtures and the release rate in acidic conditions were characterized by UV spectroscopy and HPLC. The higher loading efficiency was obtained with an ethanol:water 35:65 phenolic solution, equal to 42.0 ± 0.6%, with a total release of 11.5 ± 0.7 mg of total polyphenols per 11.3 μL of microcapsules after 240 min of incubation in acidic environment. The results suggest that polysaccharide-based capsules can be successfully used to encapsulate and release low water-soluble molecules, such as polyphenols. - Highlights: • Chitosan/dextran nanocapsules were made by layer-by-layer self-assembly technique. • Different ethanol:water mixtures of four polyphenols were encapsulated. • An encapsulation efficiency of 42.0 ± 0.6% was obtained using ethanol:water 35:65. • Release profiles in acidic environment were monitored by UV spectroscopy and HPLC. • Nanocapsules had shown a complete release after 60 min in acidic environment.

  4. SIMULATION OF VINPOCETINE RELEASE PROCESS FROM MICROCAPSULES WITH HYDROPHOBIC SHELL

    Directory of Open Access Journals (Sweden)

    Yu. A. Polkovnikova

    2017-01-01

    Full Text Available Nowadays microcapsules are widely spread in different industries. Microcapsules with vitamins, etheric and fatty oils are included into different cosmetics (creams, gels, serums. Microencapsulated probiotics are used in foods and fodder additives in veterinary. An important field of application of microencapsulation in pharmacy is the combination in the total dosage of drugs that are incompatible when mixed in free form.The aim of work is a comparative analysis of thermodynamic characteristics of vinpocetine release from the melt of beeswax and cacao butter 3:2 into water, solution of hydrochloric acid 0.01 M and ethanol.Materials and methods. For simulation of the process of vinpocetine release from the melt into different environments models component models of the studied systems were built and their atom charges were calculated by quantum-chemical method. Spatial models of the components were built in Hyper Chem 8.01. As an initial state for the thermodynamic characteristics of the calculation of vinpocetine release from the melt, a conformation of «melt-vinpocetine» system was used after thermodynamic equilibration by molecular dynamics simulation in Bioeurica program for 5 ns. For isolated systems a vibrational analysis was performed with the use of unrestricted Hartree-Fock method in STO-3G basis set in Orca 4.0 program.Results and discussion. Vinpocetine release from the melt of beeswax and cacao butter 3:2 into water with different pH values and to ethanol depends on its solubility in these environments, and also on solubility of the melt.Conclusion. The performed study of vinpocetine release from the melt of beeswax and cacao butter 3:2 by molecular dynamics simulation demonstrates the opportunity of vinpocetine release into water with pH=2 and into ethanol. The obtained results make it possible to assume a lower degree of vinpocetine release from the melt into ethanol compared with the solution of hydrochloric acid 0,01 M.

  5. Chitosan/dextran multilayer microcapsules for polyphenol co-delivery

    International Nuclear Information System (INIS)

    Paini, Marco; Aliakbarian, Bahar; Casazza, Alessandro A.; Perego, Patrizia; Ruggiero, Carmelina; Pastorino, Laura

    2015-01-01

    Polysaccharide-based nanostructured polymeric microcapsules were fabricated by the electrostatic layer-by-layer self-assembly technique and used to encapsulate mixtures of four different polyphenols in order to achieve their controlled release. The real-time fabrication of the dextran/chitosan multilayer was monitored by quartz crystal microbalance with dissipation monitoring, and the morphology of the nanostructured polymeric capsules was characterized by scanning electron microscopy. The polyphenol encapsulation was obtained by reversible permeability variation of the capsule shell in ethanol:water mixtures. The loading efficiency in different water:ethanol mixtures and the release rate in acidic conditions were characterized by UV spectroscopy and HPLC. The higher loading efficiency was obtained with an ethanol:water 35:65 phenolic solution, equal to 42.0 ± 0.6%, with a total release of 11.5 ± 0.7 mg of total polyphenols per 11.3 μL of microcapsules after 240 min of incubation in acidic environment. The results suggest that polysaccharide-based capsules can be successfully used to encapsulate and release low water-soluble molecules, such as polyphenols. - Highlights: • Chitosan/dextran nanocapsules were made by layer-by-layer self-assembly technique. • Different ethanol:water mixtures of four polyphenols were encapsulated. • An encapsulation efficiency of 42.0 ± 0.6% was obtained using ethanol:water 35:65. • Release profiles in acidic environment were monitored by UV spectroscopy and HPLC. • Nanocapsules had shown a complete release after 60 min in acidic environment

  6. Pharmacological studies of lappaconitine. Analgesic activities.

    Science.gov (United States)

    Ono, M; Satoh, T

    1988-07-01

    The analgesic activity of lappaconitine, which is contained in the root of Aconitum sinomantanum Nakai, was examined after oral and subcutaneous administration to mice or rats by using methods for screening of analgesics, i.e., hot plate, tail immersion, tail pinch, tail pressure, acetic acid-induced writhing, bradykinin-induced flexor reflex of hind limb and Randall-Selitto methods. The results were compared with those for morphine, indometacin and acetylsalicylic acid (ASA). Analgesic activities of lappaconitine were greater than those of indometacin and ASA, but generally about 2 to 5 times less than those of morphine. However, in the rat tail immersion test, orally administered lappaconitine exhibited more potent analgesic activity than morphine; in this test, lappaconitine was almost equipotent when given orally and subcutaneously, whereas the potency of orally administered morphine was only one-twentieth of that of subcutaneously administered morphine. Like morphine, lappaconitine increased the pain threshold of the normal paw as well as that of the inflamed paw when tested by the Randall-Selitto method. The results show that lappaconitine has strong analgesic activity, and further suggest that the central nervous system may be involved in the action on the pain threshold.

  7. Production of BCG alginate-PLL microcapsules by emulsification/internal gelation.

    Science.gov (United States)

    Esquisabel, A; Hernández, R M; Igartua, M; Gascón, A R; Calvo, B; Pedraz, J L

    1997-01-01

    A biocompatible emulsification method for microencapsulation of live cells and enzymes within a calcium alginate matrix applied to Bacillus Calmette-Guérin (BCG) has been developed. Small-diameter alginate beads (microcapsules) were formed via internal gelation of an alginate solution emulsified within vegetable oil. Five different oils (sesame, sweet almond, perhydrosqualene, camomile and jojoba) were used. The rheological analysis of the oils showed a Newtonian behaviour, with viscosities = 30.0, 37.7, 51.2, 59.3 and 67.1 mPa.s for perhydrosqualene, jojoba, camomile, sesame and sweet almond oil respectively. The particle size of the microcapsules obtained ranged from 30.3 microns for the microcapsules prepared with sweet almond oil to 57.0 microns for those made with perhydrosqualene. The mean particle diameter obtained was found to be dependent on the viscosity of the oil employed, according to the equation: phi (micron) = 76.6-0.628 eta (mPa.s) (r2 = 0.943). The encapsulated BCG was identified by the Difco TB stain set K, followed by observation under optical microscopy. Freeze-drying of the microcapsules was carried out to ensure their stability during storage. Two batches of microcapsules (those prepared with sesame and jojoba oil) and four types of cryoprotectors (glucose, trehalose, mannitol and sorbitol), at three concentration levels (5, 10 and 20% w/v) were studied. The parameters evaluated were particle size, physical appearance, reconstitution of lyophilizates and microscopical evaluation. For both batches of microcapsules the best results were obtained with trehalose 5%, showing particle sizes of 42.1 microns in the case of the microcapsules prepared with sesame oil, and of 45.3 microns for those prepared with jojoba.

  8. Analgesic effects of dexamethasone in burn injury

    DEFF Research Database (Denmark)

    Werner, Mads U; Lassen, Birgit Vibeke; Kehlet, Henrik

    2002-01-01

    and secondary hyperalgesia. RESULTS: The burn injury induced significant increases in erythema (P burn did not differ between dexamethasone and placebo treatments (P >.6). There were no significant......BACKGROUND AND OBJECTIVES: Glucocorticoids are well-known adjuvant analgesics in certain chronic pain states. There is, however, a paucity of data on their analgesic efficacy in acute pain. Therefore, the aim of the study was to examine the analgesic effects of dexamethasone in a validated burn...... model of acute inflammatory pain in humans. METHODS: Twenty-two volunteers were investigated in a double-blind, randomized, placebo-controlled cross-over study. Intravenous dexamethasone 8 mg or placebo was administered on 2 separate study days. Two hours after drug administration, a first-degree burn...

  9. Assessment of Postoperative Analgesic Drug Efficacy

    DEFF Research Database (Denmark)

    Andersen, Lars Peter Kloster; Gögenur, Ismail; Torup, Henrik

    2017-01-01

    BACKGROUND: Pain intensity ratings and opioid consumption (OC) are ubiquitous indicators of pain in postoperative trials of the efficacy of interventional procedures. Unfortunately, consensus on the appropriate statistical handling of these outcomes has not been reached. The aim of this article was......, therefore, to reexamine original data obtained from a postoperative analgesic drug trial, applying a collection of standard statistical methods in analgesic outcome assessments. Furthermore, a modified integrated assessment method of these outcomes was evaluated. METHODS: Data from a randomized, double...... also included an integrated assessment of longitudinally measured pain intensity and opioid consumption (PIOC0-6/0-24 h). Also, estimation of effect size, generalized odds ratio of the individual analgesic outcome variables was performed. RESULTS: Sixty-one patients were included in the final data...

  10. Analgesic Treatment in Laparoscopic Gastric Bypass Surgery

    DEFF Research Database (Denmark)

    Andersen, Lars P H; Werner, Mads U; Rosenberg, Jacob

    2014-01-01

    This review aimed to present an overview of the randomized controlled trials investigating analgesic regimens used in laparoscopic Roux-en-Y gastric bypass (LRYGB) surgery. Literature search was performed in PubMed and EMBASE databases in August 2013 in accordance to PRISMA guidelines. The litera......This review aimed to present an overview of the randomized controlled trials investigating analgesic regimens used in laparoscopic Roux-en-Y gastric bypass (LRYGB) surgery. Literature search was performed in PubMed and EMBASE databases in August 2013 in accordance to PRISMA guidelines...

  11. Design and characterization of microcapsules-integrated collagen matrixes as multifunctional three-dimensional scaffolds for soft tissue engineering.

    Science.gov (United States)

    Del Mercato, Loretta L; Passione, Laura Gioia; Izzo, Daniela; Rinaldi, Rosaria; Sannino, Alessandro; Gervaso, Francesca

    2016-09-01

    Three-dimensional (3D) porous scaffolds based on collagen are promising candidates for soft tissue engineering applications. The addition of stimuli-responsive carriers (nano- and microparticles) in the current approaches to tissue reconstruction and repair brings about novel challenges in the design and conception of carrier-integrated polymer scaffolds. In this study, a facile method was developed to functionalize 3D collagen porous scaffolds with biodegradable multilayer microcapsules. The effects of the capsule charge as well as the influence of the functionalization methods on the binding efficiency to the scaffolds were studied. It was found that the binding of cationic microcapsules was higher than that of anionic ones, and application of vacuum during scaffolds functionalization significantly hindered the attachment of the microcapsules to the collagen matrix. The physical properties of microcapsules-integrated scaffolds were compared to pristine scaffolds. The modified scaffolds showed swelling ratios, weight losses and mechanical properties similar to those of unmodified scaffolds. Finally, in vitro diffusional tests proved that the collagen scaffolds could stably retain the microcapsules over long incubation time in Tris-HCl buffer at 37°C without undergoing morphological changes, thus confirming their suitability for tissue engineering applications. The obtained results indicate that by tuning the charge of the microcapsules and by varying the fabrication conditions, collagen scaffolds patterned with high or low number of microcapsules can be obtained, and that the microcapsules-integrated scaffolds fully retain their original physical properties. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Preparation and characterization of monodisperse microcapsules with alginate and bentonite via external gelation technique encapsulating Pseudomonas putida Rs-198.

    Science.gov (United States)

    Li, Xuan; Wu, Zhansheng; He, Yanhui; Ye, Bang-Ce; Wang, Jun

    2017-10-01

    This paper evaluated the external gelation technique for preparing microcapsules. The microcapsules were consisted of Pseudomonas putida Rs-198 (Rs-198) core and sodium alginate (NaAlg)-bentonite (Bent) shell. Different emulsification rotation speeds and core/shell ratios were used to prepare the microcapsules of each formulation. The near-spherical microcapsules were monodisperse with a mean diameter of 25-100 μm and wrinkled surfaces. Fourier transform infrared spectrophotometry (FTIR) and thermogravimetric analysis (TGA) revealed the physical mixture of the wall material and the superior thermal stability of the microcapsules. Percentage yield, water content, and encapsulation efficiency were evaluated and correlated with the changes in emulsification rotation speed and core/shell ratio. In vitro release experiments demonstrated that 60% of the bacteria were released from the NaAlg-Bent microcapsules within three days. Considerably better survival was observed for encapsulated cells compared to free cells, especially in pH 4.0 and 10.0. In summary, the desired properties of microcapsules can be obtained by external gelation technique and the microcapsules on the bacteria had a good protective effect.

  13. Distribution of PEG-coated hollow polyelectrolyte microcapsules after introduction into the circulatory system and muscles of zebrafish

    Directory of Open Access Journals (Sweden)

    Ekaterina Borvinskaya

    2018-01-01

    Full Text Available The use of polyelectrolyte multilayer microcapsules as carriers for fluorescent molecular probes is a prospective technique for monitoring the physiological characteristics of animal vasculature and interstitial environment in vivo. Polyelectrolyte microcapsules have many features that favor their use as implantable carriers of optical sensors, but little information is available on their interactions with complex living tissues, distribution or residence time following different routes of administration in the body of vertebrates. Using the common fish model, the zebrafish Danio rerio, we studied in vivo the distribution of non-biodegradable microcapsules covered with polyethylene glycol (PEG over time in the adults and evaluated potential side effects of their delivery into the fish bloodstream and muscles. Fluorescent microcapsules administered into the bloodstream and interstitially (in concentrations that were sufficient for visualization and spectral signal recording both showed negligible acute toxicity to the fishes during three weeks of observation. The distribution pattern of microcapsules delivered into the bloodstream was stable for at least one week, with microcapsules prevalent in capillaries-rich organs. However, after intramuscular injection, the phagocytosis of the microcapsules by immune cells was manifested, indicating considerable immunogenicity of the microcapsules despite PEG coverage. The long-term negative effects of chronic inflammation were also investigated in fish muscles by histological analysis.

  14. Microcapsules Filled with a Palm Oil-Based Alkyd as Healing Agent for Epoxy Matrix

    Directory of Open Access Journals (Sweden)

    Nurshafiza Shahabudin

    2016-04-01

    Full Text Available One of the approaches to prolong the service lifespan of polymeric material is the development of self-healing ability by means of embedded microcapsules containing a healing agent. In this work, poly(melamine-urea-formaldehyde (PMUF microcapsules containing a palm oil-based alkyd were produced by polymerization of melamine resin, urea and formaldehyde that encapsulated droplets of the suspended alkyd particles. A series of spherical and free-flowing microcapsules were obtained. The chemical properties of core and shell materials were characterized by Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR and proton nuclear magnetic resonance spectroscopy (1H-NMR. Differential scanning calorimetry (DSC analysis showed a glass transition around −15 °C due to the alkyd, and a melting temperature at around 200 °C due to the shell. Thermogravimetric analysis (TGA results showed that the core and shell thermally degraded within the temperature range of 200–600 °C. Field emission scanning electron microscope (FESEM examination of the ruptured microcapsule showed smooth inner and rough outer surfaces of the shell. Flexural strength and microhardness (Vickers of the cured epoxy compound were not affected with the incorporation of 1%–3% of the microcapsules. The viability of the healing reactions was demonstrated by blending small amounts of alkyd with epoxy and hardener at different ratios. The blends could readily cure to non-sticky hard solids at room temperature and the reactions could be verified by ATR-FTIR.

  15. Development of thermoregulating microcapsules with cyclotriphosphazene as a flame retardant agent

    Science.gov (United States)

    Szczotok, A. M.; Carmona, M.; Serrano, A.; Kjøniksen, A. L.; Rodriguez, J. F.

    2017-10-01

    Thermoregulating microcapsules containing phase change material (Rubitherm®RT27) was produced by using the suspension-like polymerization technique with styrene (St), divinylbenzene (DVB) and hexa(methacryloylethylenedioxy) cyclotriphosphazene (PNC-HEMA) as co-monomers. The effect of PNC-HEMA for improving the flame retardant properties of the microcapsules were analyzed by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). It was found that the thermal energy storage (TES) capacity of the microcapsules increased in the presence of PNC-HEMA. However, the morphology of the microcapsules became irregular when the content of monomer with flame retardant properties was increased. Thermogravimetric analysis performed under atmospheric air confirmed that the PNC-HEMA raised the amount of residue after the burning process, proving the formation of thermally stable char. Thus, these materials could be considered as an important alternative to commonly used microcapsules containing phase change materials (PCMs), where a lower flammability is required for their application.

  16. Preparation of Well-Dispersed Chitosan/Alginate Hollow Multilayered Microcapsules for Enhanced Cellular Internalization

    Directory of Open Access Journals (Sweden)

    Carla Ribeiro

    2018-03-01

    Full Text Available Hollow multilayered capsules have shown massive potential for being used in the biomedical and biotechnology fields, in applications such as cellular internalization, intracellular trafficking, drug delivery, or tissue engineering. In particular, hollow microcapsules, developed by resorting to porous calcium carbonate sacrificial templates, natural-origin building blocks and the prominent Layer-by-Layer (LbL technology, have attracted increasing attention owing to their key features. However, these microcapsules revealed a great tendency to aggregate, which represents a major hurdle when aiming for cellular internalization and intracellular therapeutics delivery. Herein, we report the preparation of well-dispersed polysaccharide-based hollow multilayered microcapsules by combining the LbL technique with an optimized purification process. Cationic chitosan (CHT and anionic alginate (ALG were chosen as the marine origin polysaccharides due to their biocompatibility and structural similarity to the extracellular matrices of living tissues. Moreover, the inexpensive and highly versatile LbL technology was used to fabricate core-shell microparticles and hollow multilayered microcapsules, with precise control over their composition and physicochemical properties, by repeating the alternate deposition of both materials. The microcapsules’ synthesis procedure was optimized to extensively reduce their natural aggregation tendency, as shown by the morphological analysis monitored by advanced microscopy techniques. The well-dispersed microcapsules showed an enhanced uptake by fibroblasts, opening new perspectives for cellular internalization.

  17. Controlling Gel Structure to Modulate Cell Adhesion and Spreading on the Surface of Microcapsules.

    Science.gov (United States)

    Zheng, Huizhen; Gao, Meng; Ren, Ying; Lou, Ruyun; Xie, Hongguo; Yu, Weiting; Liu, Xiudong; Ma, Xiaojun

    2016-08-03

    The surface properties of implanted materials or devices play critical roles in modulating cell behavior. However, the surface properties usually affect cell behaviors synergetically so that it is still difficult to separately investigate the influence of a single property on cell behavior in practical applications. In this study, alginate-chitosan (AC) microcapsules with a dense or loose gel structure were fabricated to understand the effect of gel structure on cell behavior. Cells preferentially adhered and spread on the loose gel structure microcapsules rather than on the dense ones. The two types of microcapsules exhibited nearly identical surface positive charges, roughness, stiffness, and hydrophilicity; thus, the result suggested that the gel structure was the principal factor affecting cell behavior. X-ray photoelectron spectroscopy analyses demonstrated that the overall percentage of positively charged amino groups was similar on both microcapsules. The different gel structures led to different states and distributions of the positively charged amino groups of chitosan, so we conclude that the loose gel structure facilitated greater cell adhesion and spreading mainly because more protonated amino groups remained unbound and exposed on the surface of these microcapsules.

  18. The effect of cinnamon bark (Cinnamomum burmanii) essential oil microcapsules on vacuumed ground beef quality

    Science.gov (United States)

    Brilliana, I. N.; Manuhara, G. J.; Utami, R.; Khasanah, L. U.

    2017-04-01

    Ground beef has a short shelf life because it is susceptible to damage due to microbial contamination and lipid oxidation. So some sort of preservation method such as refrigerated storage, vacuum packaging or natural preservative addition is needed to extend the shelf life of ground beef. A natural preservative that can be used as a food preservative is the cinnamon bark (Cinnamomum burmanii) essential oil microcapsules. The aim of the research was to determine the influence of a cinnamon bark essential oil microcapsules (0%;0.5% and 1% w/w of the ground beef) on the Total Plate Count (TPC), Thiobarbituric Acid (TBA), pH and color of ground beef during refrigerated storage (4±1°C). The result showed that cinnamon bark essential oil microcapsules affected the TPC, TBA, pH and color of ground beef. The addition of the cinnamon bark essential oil microcapsules on ground beef can inhibit microbial growth, inhibit lipid oxidation, inhibit discoloration and lowering pH of fresh ground beef during refrigerated storage compared to the control sample. The higher of the microcapsules were added, the higher the inhibition of microbial growth, lipid oxidation and discoloration of ground beef, indicating better preservation effects.

  19. Encapsulated eucalyptus oil in ionically cross-linked alginate microcapsules and its controlled release.

    Science.gov (United States)

    Noppakundilograt, Supaporn; Piboon, Phianghathai; Graisuwan, Wilaiporn; Nuisin, Roongkan; Kiatkamjornwong, Suda

    2015-10-20

    Sodium alginate microcapsules containing eucalyptus oil were prepared by oil-in-water emulsification via Shirasu porous glass (SPG) membrane and cross-linked by calcium chloride (CaCl2). SPG membrane pore size of 5.2μm was used to control the size of eucalyptus oil microdroplets. Effects of sodium alginate, having a mannuronic acid/guluronic acid (M/G) ratio of 1.13, eucalyptus oil and CaCl2 amounts on microdroplet sizes and size distribution were elucidated. Increasing sodium alginate amounts from 0.1 to 0.5% (wv(-1)) sodium alginate, the average droplets size increased from 42.2±2.0 to 48.5±0.6μm, with CVs of 16.5±2.2 and 30.2±4.5%, respectively. CaCl2 successfully gave narrower size distribution of cross-linked eucalyptus oil microcapsules. The optimum conditions for preparing the microcapsules, oil loading efficiency, and controlled release of the encapsulated eucalyptus oil from the microcapsules as a function of time at 40°C were investigated. Release model for the oil from microcapsules fitted Ritger-Peppas model with non-Fickian transport mechanism. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. On spray drying of oxidized corn starch cross-linked gelatin microcapsules for drug release

    International Nuclear Information System (INIS)

    Dang, Xugang; Yang, Mao; Shan, Zhihua; Mansouri, Shahnaz; May, Bee K; Chen, Xiaodong; Chen, Hui; Woo, Meng Wai

    2017-01-01

    Spray-dried gelatin/oxidized corn starch (G/OCS) microcapsules were produced for drug release application. The prepared microcapsules were characterized through a scanning electron microscope (SEM) picture and thermogravimetric analysis (TGA). The swelling characteristics of the G/OCS microcapsules and release properties of vitamin C were then investigated. The results from structural analysis indicated that the presence of miscibility and compatibility between oxidized corn starch and gelatin, and exhibits high thermal stability up to 326 °C. The swelling of G/OCS microcapsules increased with increasing pH and reduced with decreasing ionic strength, attributed to the cross-linking between gelatin and oxidized corn starch, ionization of functional groups. Vitamin C release characteristic revealed controlled release behavior in the first 3 h of contact with an aqueous medium. This release behavior was independent of the swelling behavior indicating the potential of the encapsulating matrix to produce controlled release across a spectrum of pH environment. - Highlights: • It's first time to prepare microencapsulation with gelatin and oxidized corn starch. • The microencapsulation material can be biodegradable completely. • The production technology of microcapsule is convenient. • This work explores the potential to use oxidized starch cross-linked gelatin. • The microencapsulation material can be used for drug release.

  1. Phycocyanin stability in microcapsules processed by spray drying method using different inlet temperature

    Science.gov (United States)

    Purnamayati, L.; Dewi, EN; Kurniasih, R. A.

    2018-02-01

    Phycocyanin is natural blue colorant which easily damages by heat. The inlet temperature of spray dryer is an important parameter representing the feature of the microcapsules.The aim of this study was to investigate the phycocyanin stability of microcapsules made from Spirulina sp with maltodextrin and κ-Carrageenan as the coating material, processed by spray drying method in different inlet temperature. Microcapsules were processed in three various inlet temperaturei.e. 90°C, 110°C, and 130°C, respectively. The results indicated that phycocyanin microcapsule with 90°C of inlet temperature produced the highest moisture content, phycocyanin concentration and encapsulation efficiency of 3,5%, 1,729% and 29,623%, respectively. On the other hand, the highest encapsulation yield was produced by 130°C of theinlet temperature of 29,48% and not significantly different with 110°C. The results of Scanning Electron Microscopy (SEM) showed that phycocyanin microcapsules with 110°C of inlet temperature produced the most rounded shape. To sum up, 110°C was the best inlet temperature to phycocyanin microencapsulation by the spray dryer.

  2. On spray drying of oxidized corn starch cross-linked gelatin microcapsules for drug release

    Energy Technology Data Exchange (ETDEWEB)

    Dang, Xugang; Yang, Mao; Shan, Zhihua [National Engineering Laboratory for Clean Technology Leather Manufacture, Sichuan University, Chengdu, Sichuan 610065 (China); Mansouri, Shahnaz [Department of Chemical Engineering, Monash University, VIC 3800 (Australia); May, Bee K [School of Applied Science, RMIT University, 124 La Trobe St, Melbourne, VIC 3001 (Australia); Chen, Xiaodong [Department of Chemical Engineering, Monash University, VIC 3800 (Australia); School of Chemical and Environmental Engineering, College of Chemistry, Chemical Engineering and Material Science, Soochow University (China); Chen, Hui, E-mail: leather2088@sina.com [National Engineering Laboratory for Clean Technology Leather Manufacture, Sichuan University, Chengdu, Sichuan 610065 (China); Department of Chemical Engineering, Monash University, VIC 3800 (Australia); Woo, Meng Wai, E-mail: meng.woo@monash.edu [Department of Chemical Engineering, Monash University, VIC 3800 (Australia)

    2017-05-01

    Spray-dried gelatin/oxidized corn starch (G/OCS) microcapsules were produced for drug release application. The prepared microcapsules were characterized through a scanning electron microscope (SEM) picture and thermogravimetric analysis (TGA). The swelling characteristics of the G/OCS microcapsules and release properties of vitamin C were then investigated. The results from structural analysis indicated that the presence of miscibility and compatibility between oxidized corn starch and gelatin, and exhibits high thermal stability up to 326 °C. The swelling of G/OCS microcapsules increased with increasing pH and reduced with decreasing ionic strength, attributed to the cross-linking between gelatin and oxidized corn starch, ionization of functional groups. Vitamin C release characteristic revealed controlled release behavior in the first 3 h of contact with an aqueous medium. This release behavior was independent of the swelling behavior indicating the potential of the encapsulating matrix to produce controlled release across a spectrum of pH environment. - Highlights: • It's first time to prepare microencapsulation with gelatin and oxidized corn starch. • The microencapsulation material can be biodegradable completely. • The production technology of microcapsule is convenient. • This work explores the potential to use oxidized starch cross-linked gelatin. • The microencapsulation material can be used for drug release.

  3. A silicone rubber based composites using n-octadecane/poly (styrene-methyl methacrylate microcapsules as energy storage particle

    Directory of Open Access Journals (Sweden)

    W.L. Wu

    Full Text Available A phase-change energy-storage material, silicone rubber (SR coated n-octadecane/poly (styrene-methyl methacrylate (SR/OD/P(St-MMA microcapsule composites, was prepared by mixing SR and OD/P(St-MMA microcapsules. The microcapsule content and silicone rubber coated method were investigated. The morphology and thermal properties of the composites were characterized by scanning electron microscopy (SEM, thermogravimetric analysis (TG, differential scanning calorimetry (DSC and heat storage properties. The results showed that the thermal and mechanical properties of SR/OD/P(St-MMA composites were excellent when the microcapsules were coated with room temperature vulcanized silicone rubber (RTVSR, of which content was 2 phr (per hundred rubber. The enthalpy value of the composites was 67.6 J g−1 and the composites were found to have good energy storage function. Keywords: n-Octadecane, Silicone rubber, Microcapsule, Energy-storage, Composites

  4. Anti-inflammatory and Analgesic Activities of Amorphophallus bulbifer

    African Journals Online (AJOL)

    HP

    time of the animals treated with either standard or extract. Pentazocin ... standard. Results: The extract showed significant anti-inflammatory and analgesic activities at the two test dose ..... effectiveness of analgesic agents in the tail- flick pain ...

  5. Use of analgesic drugs and risk of ovarian cancer

    DEFF Research Database (Denmark)

    Ammundsen, Henriette B; Faber, Mette T; Jensen, Allan

    2012-01-01

    The role of analgesic drug use in development of ovarian cancer is not fully understood. We examined the association between analgesic use and risk of ovarian cancer. In addition, we examined whether the association differed according to histological types....

  6. Analgesic Effect and Immunomodulation Response on Pro ...

    African Journals Online (AJOL)

    In order to determine qualitatively the chemical components of the extract, thin layer chromatography (TLC) was used. The analgesic activity of the extract at various doses (25, 50, 100 and 200 mg/kg, i.p) was assessed using formalin test while pro-inflammatory cytokines were measured by enzyme-linked immunosorbent ...

  7. The study of a fluorescent biosensor based on polyelectrolyte microcapsules with encapsulated glucose oxidase

    Science.gov (United States)

    Kazakova, L. I.; Sirota, N. P.; Sirota, T. V.; Shabarchina, L. I.

    2017-09-01

    A fluorescent biosensor is synthesized and described. The biosensor consists of polyelectrolyte microcapsules with glucose oxidase (GOx) entrapped in the cavities and an oxygen-sensitive fluorescent indicator Ru(dpp) immobilized in shells, where Ru(dpp) is tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) dichloride. The theoretical activity of the encapsulated GOx and the effect storage time and medium composition have on the stability of sensor microcapsules are determined from polarographic measurements. No change in the activity of the encapsulated enzyme and or its loss to the storage medium are detected over the test period. The dispersion medium (water or a phosphate buffer) are shown to have no effect on the activity of microcapsules with immobilized GOx. The described optical sensor could be used as an alternative to electrochemical sensors for in vitro determination of glucose in the clinically important range of concentrations (up to 10 mmol/L).

  8. Formaldehyde-free and thermal resistant microcapsules containing n-octadecane

    International Nuclear Information System (INIS)

    Shan, X.L.; Wang, J.P.; Zhang, X.X.; Wang, X.C.

    2009-01-01

    Microcapsules containing n-octadecane were synthesized using methacrylic acid (MAA), methyl methacrylate (MMA) and 1,4-butylene glycol diacrylate (BDDA) as shell. The surface morphology, thermal physical properties, thermal stabilities and diameter distributions of the microcapsules were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and particle size distribution analysis, respectively. The experimental results show that, the core material is well encapsulated in the presence of emulsifier-sodium salt of styrene-maleic anhydride co-polymer. The average diameter of the microcapsules is 18 μm. The enthalpy of microencapsulated n-octadecane (MC 18 ) with MAA-MMA co-polymeric shell is 155 J g -1 which corresponds to 70 wt.% core content. The thermal resistant temperature of MC 18 is 238 o C, which is affected by n-octadecane/monomers mass ratios and the content of cross-linking agent-BDDA.

  9. Evaluation of analgesic and anti-inflammatory effects of ethanol ...

    African Journals Online (AJOL)

    This study was undertaken to investigate the leaf part of the plant for analgesic and anti-inflammatory. The ethanol extract of Ficus iteophylla leaves (100, 200, and 400mgkg-1, i.p) was evaluated for analgesic and anti-inflammatory activities. The analgesic effect was studied using acetic acid-induced abdominal constriction ...

  10. The effectiveness of analgesic electrotherapy in the control of pain ...

    African Journals Online (AJOL)

    The change in pain perceived was assessed after a course of analgesic electrotherapy using a visual analogue scale as well as changes in use of analgesics and walking ability. Results: The level of pain reported and use of analgesics dropped significantly after the electrotherapy course, compared to the control group.

  11. An investigation into the prescribing of analgesics | Truter | South ...

    African Journals Online (AJOL)

    Data were obtained from a medical aid which used a formulary system. Main outcome measures: Percentage of central nervous system drugs that analgesics comprised; proportion of patients using combination analgesics; cost of analgesics. Results: On average, 83.3% of all central nervous system drugs dispensed were ...

  12. Evaluation Of Analgesic And Anti-Inflammatory Activity Of Diospyros ...

    African Journals Online (AJOL)

    Evaluation Of Analgesic And Anti-Inflammatory Activity Of Diospyros Cordifolia Extract. S Das, PK Haldar, G Pramanik, SP Panda, S Bera. Abstract. In this study we evaluated the analgesic and anti- inflammatory activities of the methanol extract of stem bark of Diospyros cordifolia (MEDC) Roxb. The analgesic effects of the ...

  13. Selective uptake of manganese in seawater by hybrid microcapsules

    International Nuclear Information System (INIS)

    Kuzumaki, Takenori; Yan, Wu; Mimura, Hitoshi; Niibori, Yuichi

    2008-01-01

    The selective separation and recovery of low concentrated elements in seawater are very important subjects for the advancement of environmental monitoring. Selective uptake of manganese from seawater was carried out by using two kinds of microcapsules (MCs) including activated carbon (AC) and insoluble tannin (T). The adsorbents, AC and T, having affinity for manganese, were enclosed into MCs (ACMS, TMC) by sol-gel method using matrices of biopolymer (calcium alginate gel polymer, CaALG). The uptake properties and selectivity of Mn 2+ (1 ppm) for MCs were examined by batch method. Relatively large uptake percentages of Mn 2+ above 80% were obtained within 1 h, and the uptake percentage above 80% was kept at pH 3-6. The uptake order was found to be T, AC, CaALG > ACMC, TMC. The uptake of Mn 2+ decreased with increasing Na + ion concentration. This tendency depends on the swelling property of CaALG; it tends to solate in the presence of highly concentrated Na + ions. The manganese ions were adsorbed on CaALG, ACMC and TMC from seawater containing 1,000 ppm Mn 2+ . ACMC and TMC had selectivity to Mn 2+ , and, especially, the matrices of CaALG also had an excellent uptake and selectivity properties. (author)

  14. Polypropylenes foam consisting of thermally expandable microcapsule as blowing agent

    Science.gov (United States)

    Jeoung, Sun Kyung; Hwang, Ye Jin; Lee, Hyun Wook; Kwak, Sung Bok; Han, In-Soo; Ha, Jin Uk

    2016-03-01

    The structure of thermally expandable microcapsule (TEMs) is consisted of a thermoplastic shell which is filled with liquid hydrocarbon at core. The shell of TEMs becomes soft when the temperature is higher than boiling temperature of liquid hydrocarbon. The shell of TEMs is expanded under the high temperature because the inner pressure of TEMs is increased by vaporization of hydrocarbon core. Therefore, the TEMs are applicable for blowing agents and light weight fillers. In this research, we fabricated the polypropylene (PP) foam by using the TEMs and chemical blowing agents and compared to their physical properties. The density of the specimen was decreased when the contents of chemical blowing agents and TEMs were increased. In addition, the mechanical properties (i.e. tensile strength and impact strength) of specimens were deteriorated with increasing amount of chemical blowing agents and TEMs. However, PP foam produced with TEMs showed higher impact strength than the one with the chemical blowing agent. In order to clarify the dependence of impact strength of PP foam as the blowing agent, the morphology difference of the PP foams was investigated. Expanding properties of PP foams produced with TEMs was changed with TEMs content of PP foams. Processing conditions also influenced the mechanical properties of PP foam containing TEMs.

  15. Ethyl cellulose microcapsules for protecting and controlled release of folic acid.

    Science.gov (United States)

    Prasertmanakit, Satit; Praphairaksit, Nalena; Chiangthong, Worawadee; Muangsin, Nongnuj

    2009-01-01

    Ethyl cellulose microcapsules were developed for use as a drug-delivery device for protecting folic acid from release and degradation in the undesirable environmental conditions of the stomach, whilst allowing its release in the intestinal tract to make it available for absorption. The controlled release folic acid-loaded ethyl cellulose microcapsules were prepared by oil-in-oil emulsion solvent evaporation using a mixed solvent system, consisting of a 9:1 (v/v) ratio of acetone:methanol and light liquid paraffin as the dispersed and continuous phase. Span 80 was used as the surfactant to stabilize the emulsion. Scanning electron microscopy revealed that the microcapsules had a spherical shape. However, the particulate properties and in vitro release profile depended on the concentrations of the ethyl cellulose, Span 80 emulsifier, sucrose (pore inducer), and folic acid. The average diameter of the microcapsules increased from 300 to 448 microm, whilst the folic acid release rate decreased from 52% to 40%, as the ethyl cellulose concentration was increased from 2.5% to 7.5% (w/v). Increasing the Span 80 concentration from 1% to 4% (v/v) decreased the average diameter of microcapsules from 300 to 141 microm and increased the folic acid release rate from 52% to 79%. The addition of 2.5-7.5% (w/v) of sucrose improved the folic acid release from the microcapsules. The entrapment efficiency was improved from 64% to 88% when the initial folic acid concentration was increased from 1 to 3 mg/ml.

  16. Sustained Dye Release Using Poly(urea-urethane)/Cellulose Nanocrystal Composite Microcapsules.

    Science.gov (United States)

    Yoo, Youngman; Martinez, Carlos; Youngblood, Jeffrey P

    2017-02-14

    The aim of this study is to develop methods to reinforce polymeric microspheres with cellulose nanocrystals (CNCs) to make eco-friendly microcapsules for a variety of applications such as medicines, perfumes, nutrients, pesticides, and phase change materials. Surface hydrophobization treatments for CNCs were performed by grafting poly(lactic acid) oligomers and fatty acids (FAs) to enhance the dispersion of nanoparticles in the polymeric shell. Then, a straightforward process is demonstrated to design sustained release microcapsules by the incorporation of the modified CNCs (mCNCs) in the shell structure. The combination of the mCNC dispersion with subsequent interfacial polyurea (PU) to form composite capsules as well as their morphology, composition, mechanical properties, and release rates were examined in this study. The PU microcapsules embedded with the mCNC were characterized by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The morphologies of the microcapsules were characterized by optical microscopy (OM) and scanning electron microscope (SEM). The rupture stress and failure behavior of the microcapsules were determined through single-capsule compression tests. Oil-soluble Sudan II dye solution in mineral oil was utilized as a model hydrophobic fill, representing other latent fills with low partition coefficients, and their encapsulation efficiency was measured spectroscopically. The release rates of the encapsulated dye from the microcapsules were examined spectroscopically by both ethanol and 2-ethyl-1-hexanol medium at room temperature. The concentration of released dye was determined by using UV-vis absorption spectrometry (UV-vis). The mCNC embedded poly(urea-urethane) capsules have strong and dense walls, which function as excellent barriers against leakage due to their extended diffusion path length and ensure enough mechanical strength from rupture for handling or postprocessing.

  17. Release of Volatile Compounds from Polymeric Microcapsules Mediated by Photocatalytic Nanoparticles

    Directory of Open Access Journals (Sweden)

    J. Marques

    2013-01-01

    Full Text Available In this study we propose a suitable method for the solar-activated controlled release of volatile compounds from polymeric microcapsules bonded with photocatalytic nanoparticles. These reservoirs can find applications, for example, in the controlled release of insecticides, repellents, or fragrances, amongst other substances. The surfaces of the microcapsules have been functionalized with TiO2 nanoparticles. Upon ultraviolet irradiation, redox mechanisms are initiated on the semiconductor surface resulting in the dissociation of the polymer chains of the capsule wall and, finally, volatilization of the encapsulated compounds. The quantification of the output release has been performed by gas chromatography analysis coupled with mass spectroscopy.

  18. Modification and evaluation of thermal properties of melamine-formaldehyde/n-eicosane microcapsules for thermo-regulation applications

    International Nuclear Information System (INIS)

    Mohaddes, F.; Islam, S.; Shanks, R.; Fergusson, M.; Wang, L.; Padhye, R.

    2014-01-01

    A modified process to enhance the latent heat of fusion of n-eicosane microcapsules in melamine-formaldehyde shells is suggested for application in textiles. Deviations in melt enthalpy and phase change temperatures were determined for produced microcapsules by differential scanning calorimetry. Thermo-regulation efficiency of eicosane-microcapsule-treated fabrics was evaluated via fitting the Newton cooling law to the experimental data, and a new constant, α, was defined as the thermal delay factor. Scanning electron microscopy images and particle size distribution analysis were consistent and the particle size was found to be between 0.5 and 2.7 μm. Melamine-formaldehyde/n-eicosane microcapsule composition was confirmed using a Fourier transform infrared spectrophotometry. The microcapsules developed showed excellent heat storage capacities, over 162.4 J/g, over melting and crystallisation ranges compared with previous studies undertaken in this field. - Highlights: • Modified eicosane microcapsules with the highest phase change enthalpies were made. • Newton cooling law was fitted to determine thermal delay in PCM-substrates. • Fine microcapsule units with diameters less than 0.5 μm were prepared. • All pliable PCM-substrates can be thermally assessed using thermal logging method

  19. Preparation of microcapsules containing different contents of different kinds of oils by a segregative coacervation method and their characterization

    Directory of Open Access Journals (Sweden)

    LIDIJA B. PETROVIĆ

    2010-05-01

    Full Text Available Microencapsulation of different oils was performed using a segregative coacervation method. In order to microencapsulate, 20 % oil-in-water (O/W emulsions were prepared in a continuous phase consisting of a 1 % mixture of hydroxypropylmethylcellulose (HPMC/sodium carboxymethylcellulose (NaCMC mass ratio (0.7/0.3 and various concentrations (0, 0.35 and 1 % of the anionic surfactant sodium dodecylsulfate (SDS. Various interactions between the components occur in the continuous phase of emulsions, which influence the structure and properties of the adsorption layer around the oil droplets. The formed HPMC/SDS complexes in the presence of NaCMC molecules undergo segregative phase separation and form a coacervate which adsorbs onto the oil droplets, forming the wall of the microcapsules. Sunflower oil, pumpkin seed oil and a mixture of sunflower and linseed oil were used as the core material. Microcapsules in the solid form were obtained by spray drying the emulsions. The stability of the emulsions, the particle size and particle size distribution of the emulsions and suspensions of microcapsules and the oil content of the microcapsules were determined. The influence of the oil kind on the properties of the microcapsules was also investigated. It was found that at 0.35 % SDS, a coacervate layer around the oil droplets forms a stabile, compact microcapsules wall, which prevents oil extraction. The kind of oil influences the properties of the emulsions and microcapsules, which is important in the selection of oils for microencapsulation by this method.

  20. Stability of cardamom (Elettaria cardamomum) essential oil in microcapsules made of whey protein isolate, guar gum, and carrageenan.

    Science.gov (United States)

    Mehyar, Ghadeer F; Al-Ismail, Khalid M; Al-Isamil, Khalid M; Al-Ghizzawi, Hana'a M; Holley, Richard A

    2014-10-01

    The effects of microencapsulating cardamom essential oil (CEO) in whey protein isolate (WPI) alone and combined with guar gum (GG) and carrageen (CG) on microencapsulation efficiency, oil chemical stability, and microcapsule structure were investigated. Freeze-dried microcapsules were prepared from emulsions containing (w/w): 15% and 30% WPI; 0.1% GG, and 0.2% CG as wall materials with CEO (at 10% of polymer concentration) as core material, and physical properties and chemical stability were compared. Bulk density of microcapsules was highest in WPI without GG or CG and in 30% WPI + GG microcapsules, and was more affected by moisture content (r = -0.6) than by mean particle diameter (d43 ; r = -0.2) and span (r = 0.1). Microcapsules containing only WPI had the highest entrapped oil (7.5%) and microencapsulation efficiency (98.5%). The concentrations of 1,8-cineole and d-limonene were used as indicators for microcapsule chemical stability since they were the main components of CEO. Microcapsules retained higher (P ≤ 0.05) concentrations of both components than non-microencapsulated CEO during 16 wk storage at 20 ºC, but higher loss of both components was noted at 35 ºC. Microencapsulated d-limonene was reduced faster than 1,8-cineole regardless of temperature. The 30% WPI and 30% WPI + GG microcapsules retained CEO best throughout storage at both storage temperatures. Scanning electron micrographs revealed that WPI microcapsules had smooth surfaces, were relatively homogenous and regular in shape, whereas GG and CG addition increased visual surface porosity and reduced shape regularity. It was concluded that the best formulation for encapsulating CEO was 30% WPI. Encapsulating cardamom essential oil in whey protein isolate alone or combined with guar gum produced dried powders that effectively retained and chemically stabilized CEO, and therefore enhanced its handling and storability. © 2014 Institute of Food Technologists®

  1. Analgesics and sedatives in vascular interventionist radiologic

    International Nuclear Information System (INIS)

    Gregorio, M.A. de; Opta, J.M.; Pulido, J.M.; Encarnacion, C.E.; Arino, I., Fernandez, J.A.; Alfonso, E.R.

    1993-01-01

    Interventionist radiology routinely requires the use of different drugs (analgesics and sedatives) in the course of a procedure. Aside from their therapeutic action, these drugs can produce secondary or undesirable effects, making necessary an in-depth knowledge of them to assure their safe and efficient management. The aim of this work is to provide the vascular interventionist radiologist with additional information on the management of those drugs that contribute to minimizing patient discomfort and pain in interventionist procedures. Author

  2. Emerging analgesic drugs for Parkinson's disease.

    Science.gov (United States)

    Perez-Lloret, Santiago; Rey, María Verónica; Dellapina, Estelle; Pellaprat, Jean; Brefel-Courbon, Christine; Rascol, Olivier

    2012-06-01

    Pain affects between 40 and 85% of Parkinson's disease (PD) patients. It is a frequently disabling and overlooked feature, which can significantly reduce health-related quality of life. Unfortunately, there are no universally recommended treatments for this condition. Evidence about the efficacy and safety of available analgesic treatments is summarized in this review. Potential targets for upcoming therapies are then discussed in light of what is currently known about the physiopathology of pain in PD. Protocols for efficacy and safety assessment of novel analgesic therapies are discussed. Finally, critical aspects of study protocol design such as patient selection or outcomes to be evaluated are discussed. Preliminary results indicate that duloxetine, cranial electrotherapy stimulation, rotigotine, subthalamic or pallidum nuclei stimulation or lesion or levodopa could be effective for treating pain in PD. Similarly, some case reports indicate that repetitive transcranial magnetic stimulation (rTMS) or apomorphine could be effective for relieving painful off-period dystonia. Clinical trials with rTMS or oxycodone/naloxone prolonged-release tablets for neuropathic pain or botulinum toxin for off-period dystonia are underway. Success of clinical trials about analgesic strategies in PD will depend on the selection of the right PD population to be treated, according to the type of pain, and the proper selection of study outcomes and follow-up of international recommendations.

  3. Micromechanical properties of a new polymeric microcapsule for self-healing cementitious materials

    NARCIS (Netherlands)

    Lv, Leyang; Schlangen, H.E.J.G.; Yang, Z.; Xing, Feng

    2016-01-01

    Self-healing cementitious materials containing a microencapsulated healing agent are appealing due to their great application potential in improving the serviceability and durability of concrete structures. In this study, poly(phenol-formaldehyde) (PF) microcapsules that aim to provide a

  4. Morphology, Stability, and Application of Lycopene Microcapsules Produced by Complex Coacervation

    Directory of Open Access Journals (Sweden)

    Glaucia A. Rocha-Selmi

    2013-01-01

    Full Text Available The interest in lycopene has increased in recent years due to studies that associate it with the reduction in risk of developing cardiovascular diseases and cancer. However, due to its high degree of unsaturation, this carotenoid is inclined to isomerize and oxidize during processing and storage, making it difficult to use in the food industry. Microencapsulation can improve this situation, increasing its stability and making incorporation into food formulations possible. Thus, the aim of this study was to microencapsulate lycopene by complex coacervation using gelatin and gum Arabic as the encapsulating agents. The microcapsules were evaluated based on the encapsulation efficiency and their morphology and then submitted to a stability test and applied in cake making. Most of the systems studied presented spherical microcapsules with defined walls. The encapsulation efficiency values were above 90%, and the average diameter of the capsules ranged from 61 to 144 μm. The stability test showed that microencapsulation offered greater protection to the lycopene as compared to its free form. The application of nonfreeze dried coacervated microcapsules in cake making was satisfactory, but the color transference was low when freezedried coacervated microcapsules were used.

  5. Preparation and characterization of poly (urea-formaldehyde) walled dicyclopentadiene microcapsules

    NARCIS (Netherlands)

    Xiong, W.; Zhu, G.; Tang, J.; Dong, B.; Han, N.; Xing, F.; Schlangen, H.E.J.G.

    2013-01-01

    Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other

  6. Nanoparticle/Polymer assembled microcapsules with pH sensing property.

    Science.gov (United States)

    Zhang, Pan; Song, Xiaoxue; Tong, Weijun; Gao, Changyou

    2014-10-01

    The dual-labeled microcapsules via nanoparticle/polymer assembly based on polyamine-salt aggregates can be fabricated for the ratiometric intracellular pH sensing. After deposition of SiO2 nanoparticles on the poly(allylamine hydrochloride)/multivalent anionic salt aggregates followed by silicic acid treatment, the generated microcapsules are stable in a wide pH range (3.0 ∼ 8.0). pH sensitive dye and pH insensitive dye are simultaneously labeled on the capsules, which enable the ratiometric pH sensing. Due to the rough and positively charged surface, the microcapsules can be internalized by several kinds of cells naturally. Real-time measurement of intracellular pH in several living cells shows that the capsules are all located in acidic organelles after being taken up. Furthermore, the negatively charged DNA and dyes can be easily encapsulated into the capsules via charge interaction. The microcapsules with combination of localized pH sensing and drug loading abilities have many advantages, such as following the real-time transportation and processing of the carriers in cells. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Modulating drug release from gastric-floating microcapsules through spray-coating layers.

    Directory of Open Access Journals (Sweden)

    Wei Li Lee

    Full Text Available Floating dosage forms with prolonged gastric residence time have garnered much interest in the field of oral delivery. However, studies had shown that slow and incomplete release of hydrophobic drugs during gastric residence period would reduce drug absorption and cause drug wastage. Herein, a spray-coated floating microcapsule system was developed to encapsulate fenofibrate and piroxicam, as model hydrophobic drugs, into the coating layers with the aim of enhancing and tuning drug release rates. Incorporating fenofibrate into rubbery poly(caprolactone (PCL coating layer resulted in a complete and sustained release for up to 8 h, with outermost non-drug-holding PCL coating layer serving as a rate-controlling membrane. To realize a multidrug-loaded system, both hydrophilic metformin HCl and hydrophobic fenofibrate were simultaneously incorporated into these spray-coated microcapsules, with metformin HCl and fenofibrate localized within the hollow cavity of the capsule and coating layer, respectively. Both drugs were observed to be completely released from these coated microcapsules in a sustained manner. Through specific tailoring of coating polymers and their configurations, piroxicam loaded in both the outer polyethylene glycol and inner PCL coating layers was released in a double-profile manner (i.e. an immediate burst release as the loading dose, followed by a sustained release as the maintenance dose. The fabricated microcapsules exhibited excellent buoyancy in simulated gastric fluid, and provided controlled and sustained release, thus revealing its potential as a rate-controlled oral drug delivery system.

  8. Research Advances: Paper Batteries, Phototriggered Microcapsules, and Oil-Free Plastic Production

    Science.gov (United States)

    King, Angela G.

    2010-01-01

    Chemists continue to work at the forefront of materials science research. Recent advances include application of bioengineering to produce plastics from renewable biomass instead of petroleum, generation of paper-based batteries, and development of phototriggerable microcapsules for chemical delivery. In this article, the author provides summaries…

  9. Electrosprayed Multi-Core Alginate Microcapsules as Novel Self-Healing Containers.

    Science.gov (United States)

    Hia, Iee Lee; Pasbakhsh, Pooria; Chan, Eng-Seng; Chai, Siang-Piao

    2016-10-03

    Alginate microcapsules containing epoxy resin were developed through electrospraying method and embedded into epoxy matrix to produce a capsule-based self-healing composite system. These formaldehyde free alginate/epoxy microcapsules were characterized via light microscope, field emission scanning electron microscope, fourier transform infrared spectroscopy and thermogravimetric analysis. Results showed that epoxy resin was successfully encapsulated within alginate matrix to form porous (multi-core) microcapsules with pore size ranged from 5-100 μm. The microcapsules had an average size of 320 ± 20 μm with decomposition temperature at 220 °C. The loading capacity of these capsules was estimated to be 79%. Under in situ healing test, impact specimens showed healing efficiency as high as 86% and the ability to heal up to 3 times due to the multi-core capsule structure and the high impact energy test that triggered the released of epoxy especially in the second and third healings. TDCB specimens showed one-time healing only with the highest healing efficiency of 76%. The single healing event was attributed by the constant crack propagation rate of TDCB fracture test. For the first time, a cost effective, environmentally benign and sustainable capsule-based self-healing system with multiple healing capabilities and high healing performance was developed.

  10. On spray drying of oxidized corn starch cross-linked gelatin microcapsules for drug release.

    Science.gov (United States)

    Dang, Xugang; Yang, Mao; Shan, Zhihua; Mansouri, Shahnaz; May, Bee K; Chen, Xiaodong; Chen, Hui; Woo, Meng Wai

    2017-05-01

    Spray-dried gelatin/oxidized corn starch (G/OCS) microcapsules were produced for drug release application. The prepared microcapsules were characterized through a scanning electron microscope (SEM) picture and thermogravimetric analysis (TGA). The swelling characteristics of the G/OCS microcapsules and release properties of vitamin C were then investigated. The results from structural analysis indicated that the presence of miscibility and compatibility between oxidized corn starch and gelatin, and exhibits high thermal stability up to 326°C. The swelling of G/OCS microcapsules increased with increasing pH and reduced with decreasing ionic strength, attributed to the cross-linking between gelatin and oxidized corn starch, ionization of functional groups. Vitamin C release characteristic revealed controlled release behavior in the first 3h of contact with an aqueous medium. This release behavior was independent of the swelling behavior indicating the potential of the encapsulating matrix to produce controlled release across a spectrum of pH environment. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Assembly of multilayer microcapsules on CacO3 particles from biocompatible polysaccharides.

    Science.gov (United States)

    Zhao, Qinghe; Mao, Zhengwei; Gao, Changyou; Shen, Jiacong

    2006-01-01

    Multilayer microcapsules were fabricated by layer-by-layer (LbL) assembly of natural polysaccharides onto CaCO3 particles, following with core removal. The micron-sized CaCO3 particles were synthesized by reaction between Ca(NO3)2 and Na2CO3 solutions in the existence of carboxylmethyl cellulose (CMC). The incorporated amount of CMC in the CaCO3 particles was found to be 5.3 wt% by thermogravimetric analysis. Two biocompatible polysaccharides, chitosan and sodium alginate were alternately deposited onto the CaCO3(CMC) templates to obtain hollow microcapsules. Regular oscillation of surface charge as detected by zeta potential demonstrated that the assembly proceeded surely in a LbL manner. The stability of the microcapsules was effectively improved by cross-linking of chitosan with glutaraldehyde. The chemical reaction was verified by infrared spectroscopy. The microcapsules thus fabricated could be spontaneously filled with positively charged low molecular weight substances such as rhodamine 6G and showed good biocompatibility, as detected by in vitro cell culture.

  12. The stability and degradation kinetics of Sulforaphene in microcapsules based on several biopolymers via spray drying.

    Science.gov (United States)

    Tian, Guifang; Li, Yuan; Yuan, Qipeng; Cheng, Li; Kuang, Pengqun; Tang, Pingwah

    2015-05-20

    Sulforaphene (SFE) was extracted from the radish seeds and the purity of SFE extracted by our laboratory was 95%. It is well known that SFE can prevent cancers. It is also known that SFE is unstable to heat. To overcome the problem, SFE microcapsules using natural biopolymers were prepared by spray drying. The results indicated that SFE microcapsules using hydroxypropyl-β-cyclodextrin (HP-β-CD), maltodextrin (MD) and isolated soybean protein (SPI) as wall materials could effectively improve its stability against heat, especially SFE-loaded HP-β-CD and MD microcapsules. The amount of SFE in the microcapsules was found 20% higher than that of the non-encapsulated SFE under 90 °C in 168 h. Our finding suggested that the rate of degradation of the non-encapsulated and encapsulated SFE with HP-β-CD, MD and SPI followed the first-order kinetics. The speed of the degradation of the encapsulated SFE in biopolymers increased from SFE with HP-β-CD, to SFE with MD, and to SFE-SPI. The non-encapsulated SFE degrades fastest. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Microcapsule-Type Self-Healing Protective Coating for Cementitious Composites with Secondary Crack Preventing Ability.

    Science.gov (United States)

    Kim, Dong-Min; Yu, Hwan-Chul; Yang, Hye-In; Cho, Yu-Jin; Lee, Kwang-Myong; Chung, Chan-Moon

    2017-01-26

    A microcapsule-type self-healing protective coating with secondary crack preventing capability has been developed using a silanol-terminated polydimethylsiloxane (STP)/dibutyltin dilaurate (DD) healing agent. STP undergoes condensation reaction in the presence of DD to give a viscoelastic substance. STP- and DD-containing microcapsules were prepared by in-situ polymerization and interfacial polymerization methods, respectively. The microcapsules were characterized by Fourier-transform infrared (FT-IR) spectroscopy, optical microscopy, and scanning electron microscopy (SEM). The microcapsules were integrated into commercial enamel paint or epoxy coating formulations, which were applied on silicon wafers, steel panels, and mortar specimens to make dual-capsule self-healing protective coatings. When the STP/DD-based coating was scratched, self-healing of the damaged region occurred, which was demonstrated by SEM, electrochemical test, and water permeability test. It was also confirmed that secondary crack did not occur in the healed region upon application of vigorous vibration to the self-healing coating.

  14. Microcapsule-Type Self-Healing Protective Coating for Cementitious Composites with Secondary Crack Preventing Ability

    Directory of Open Access Journals (Sweden)

    Dong-Min Kim

    2017-01-01

    Full Text Available A microcapsule-type self-healing protective coating with secondary crack preventing capability has been developed using a silanol-terminated polydimethylsiloxane (STP/dibutyltin dilaurate (DD healing agent. STP undergoes condensation reaction in the presence of DD to give a viscoelastic substance. STP- and DD-containing microcapsules were prepared by in-situ polymerization and interfacial polymerization methods, respectively. The microcapsules were characterized by Fourier-transform infrared (FT-IR spectroscopy, optical microscopy, and scanning electron microscopy (SEM. The microcapsules were integrated into commercial enamel paint or epoxy coating formulations, which were applied on silicon wafers, steel panels, and mortar specimens to make dual-capsule self-healing protective coatings. When the STP/DD-based coating was scratched, self-healing of the damaged region occurred, which was demonstrated by SEM, electrochemical test, and water permeability test. It was also confirmed that secondary crack did not occur in the healed region upon application of vigorous vibration to the self-healing coating.

  15. Laser-Activated Polymeric Microcapsules for Ultrasound Imaging and Therapy: In Vitro Feasibility

    NARCIS (Netherlands)

    Lajoinie, Guillaume; van Rooij, Tom; Skachkov, Ilya; Blazejewski, Emilie; Veldhuis, Gert; de Jong, Nico; Kooiman, Klazina; Versluis, Michel

    2017-01-01

    Polymeric microcapsules with a light-absorbing dye incorporated in their shell can generate vapor microbubbles that can be spatiotemporally controlled by pulsed laser irradiation. These contrast agents of 6–8 μm in diameter can circulate through the vasculature, offering possibilities for ultrasound

  16. Layer-by-layer polyelectrolyte-polyester hybrid microcapsules for encapsulation and delivery of hydrophobic drugs.

    Science.gov (United States)

    Luo, Rongcong; Venkatraman, Subbu S; Neu, Björn

    2013-07-08

    A two-step process is developed to form layer-by-layer (LbL) polyelectrolyte microcapsules, which are able to encapsulate and deliver hydrophobic drugs. Spherical porous calcium carbonate (CaCO3) microparticles were used as templates and coated with a poly(lactic acid-co-glycolic acid) (PLGA) layer containing hydrophobic compounds via an in situ precipitation gelling process. PLGA layers that precipitated from N-methyl-2-pyrrolidone (NMP) had a lower loading and smoother surface than those precipitated from acetone. The difference may be due to different viscosities and solvent exchange dynamics. In the second step, the successful coating of multilayer polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) onto the PLGA coated CaCO3 microparticles was confirmed with AFM and ζ-potential studies. The release of a model hydrophobic drug, ibuprofen, from these hybrid microcapsules with different numbers of PAH/PSS layers was investigated. It was found that the release of ibuprofen decreases with increasing layer numbers demonstrating the possibility to control the release of ibuprofen with these novel hybrid microcapsules. Besides loading of hydrophobic drugs, the interior of these microcapsules can also be loaded with hydrophilic compounds and functional nanoparticles as demonstrated by loading with Fe3O4 nanoparticles, forming magnetically responsive dual drug releasing carriers.

  17. Determination of the shell growth direction during the formation of silica microcapsules by confocal fluorescence microscopy

    NARCIS (Netherlands)

    van Wijk, J.; Salari, J.W.O.; Meuldijk, J.; Klumperman, L.

    2015-01-01

    A novel procedure was developed to determine the direction of silica growth during the formation of a silica shell around aqueous microdroplets in water-in-oil Pickering emulsions. Two fluorescently labeled silica precursors were added consecutively and the resulting microcapsules were visualized

  18. Microencapsulation of porcine thyroid cell organoids within a polymer microcapsule construct.

    Science.gov (United States)

    Yang, Yipeng; Opara, Emmanuel C; Liu, Yingbin; Atala, Anthony; Zhao, Weixin

    2017-02-01

    Hypothyroidism is a common condition of hormone deficiency, and oral administration of thyroid hormones is currently the only available treatment option. However, there are some disadvantages with this treatment modality including compliance challenges to patients. Therefore, a physiologically based alternative therapy for hypothyroidism with little or no side-effects is needed. In this study, we have developed a method for microencapsulating porcine thyroid cells as a thyroid hormone replacement approach. The hybrid wall of the polymer microcapsules permits thyroid hormone release while preventing immunoglobulin antibodies from entry. This strategy could potentially enable implantation of the microcapsule organoids containing allogeneic or xenogeneic thyroid cells to secret hormones over time without the need for immunosuppression of recipients. Porcine thyroid cells were isolated and encapsulated in alginate-poly-L-ornithine-alginate microcapsules using a microfluidic device. The porcine thyroid cells formed three-dimensional follicular spheres in the microcapsules with decent cell viability and proliferation. Thyroxine release from the encapsulated cells was higher than from unencapsulated cells ( P 28 days). These results suggest that the microencapsulated thyroid cell organoids may have the potential to be used for therapy and/or drug screening.

  19. Phase change Materials (PCM) microcapsules with different shell compositions: Preparation, characterization and thermal stability

    Energy Technology Data Exchange (ETDEWEB)

    Bayes-Garcia, L.; Ventola, L.; Cordobilla, R.; Benages, R.; Calvet, T.; Cuevas-Diarte, M.A. [Departament de Cristal.lografia, Mineralogia i Diposits Minerals, Facultat de Geologia, Universitat de Barcelona, Marti i Franques s/n, E-08028 Barcelona (Spain)

    2010-07-15

    In this study, phase change materials (Rubitherm registered RT 27) microcapsules were successfully obtained by two different methods. The main difference between them remains on the shell composition, as they are composed of different coacervates (Sterilized Gelatine/Arabic Gum for the SG/AG method and Agar-Agar/Arabic Gum for the AA/AG method). Microcapsules were thermally characterized by thermo-optical microscopy and differential scanning calorimetry. Using scanning electron microscopy, their spherical morphology (sphericity factor of 0.94-0.95) and their particle size distribution were determined, obtaining an average diameter of 12 {mu}m for the SG/AG method and lower values for the AA/AG method, where nanocapsules were also observed (average diameter of 4.3 {mu}m for the microcapsules and 104 nm for the nanocapsules). The thermal stability determination was carried out by Thermogravimetric analyses (TG) and the results show a high decomposition temperature, although the process takes places in four steps for the two mentioned methods. Moreover, the microcapsules obtained by the AA/AG method decompose in a more gradual way, as in the TG results a double step, instead of one, is appreciable. On the whole, the prepared microencapsulated PCM are totally capable of developing their role in thermal energy storage. (author)

  20. Multi-Drug-Loaded Microcapsules with Controlled Release for Management of Parkinson's Disease.

    Science.gov (United States)

    Baek, Jong-Suep; Choo, Chee Chong; Qian, Cheng; Tan, Nguan Soon; Shen, Zexiang; Loo, Say Chye Joachim

    2016-07-01

    Parkinson's disease (PD) is a progressive disease of the nervous system, and is currently managed through commercial tablets that do not sufficiently enable controlled, sustained release capabilities. It is hypothesized that a drug delivery system that provides controlled and sustained release of PD drugs would afford better management of PD. Hollow microcapsules composed of poly-l-lactide (PLLA) and poly (caprolactone) (PCL) are prepared through a modified double-emulsion technique. They are loaded with three PD drugs, i.e., levodopa (LD), carbidopa (CD), and entacapone (ENT), at a ratio of 4:1:8, similar to commercial PD tablets. LD and CD are localized in both the hollow cavity and PLLA/PCL shell, while ENT is localized in the PLLA/PCL shell. Release kinetics of hydrophobic ENT is observed to be relatively slow as compared to the other hydrophilic drugs. It is further hypothesized that encapsulating ENT into PCL as a surface coating onto these microcapsules can aid in accelerating its release. Now, these spray-coated hollow microcapsules exhibit similar release kinetics, according to Higuchi's rate, for all three drugs. The results suggest that multiple drug encapsulation of LD, CD, and ENT in gastric floating microcapsules could be further developed for in vivo evaluation for the management of PD. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Nanoparticle assembled microcapsules for application as pH and ammonia sensor

    International Nuclear Information System (INIS)

    Amali, Arlin Jose; Awwad, Nour H.; Rana, Rohit Kumar; Patra, Digambara

    2011-01-01

    Graphical abstract: HPTS encapsulated nanoparticle assembled microcapsule is exploited as dual excitations ratiometic pH sensor. This nanoparticle assembled microcapsule based fluorescence sensor can determine ammonia and offers a robust, simple and fast sensing material. Highlights: ► A novel HPTS encapsulated nanoparticle assembled microcapsule is developed. ► Its dual excitation facilitates a ratiometic pH sensor. ► It is successfully applied for the determination of ammonia. ► It provides a robust, simple and fast sensing material. - Abstract: The encapsulation of molecular probes in a suitable nanostructured matrix can be exploited to alter their optical properties and robustness for fabricating efficient chemical sensors. Despite high sensitivity, simplicity, selectivity and cost effectiveness, the photo-destruction and photo-bleaching are the serious concerns while utilizing molecular probes. Herein we demonstrate that hydroxy pyrene trisulfonate (HPTS), a pH sensitive molecular probe, when encapsulated in a microcapsule structure prepared via the assembly of silica nanoparticles mediated by poly-L-lysine and trisodium citrate, provides a robust sensing material for pH sensing under the physiological conditions. The temporal evolution under continuous irradiation indicates that the fluorophore inside the silica microcapsule is extraordinarily photostable. The fluorescence intensity alternation at dual excitation facilitates for a ratiometic sensing of the pH, however, the fluorescence lifetime is insensitive to hydrogen ion concentration. The sensing scheme is found to be robust, fast and simple for the measurement of pH in the range 5.8–8.0, and can be successfully applied for the determination of ammonia in the concentration range 0–1.2 mM, which is important for aquatic life and the environment.

  2. Chitosan/sporopollenin microcapsules: preparation, characterisation and application in heavy metal removal.

    Science.gov (United States)

    Sargın, İdris; Arslan, Gulsin

    2015-04-01

    Use of natural polymers as biosorbents for heavy metal removal is advantageous. This paper reports a study aiming to design a novel biosorbent from two biomacromolecules; chitosan, a versatile derivative of chitin, and sporopollenin, a biopolymer with excellent mechanical properties and great resistance to chemical and biological attack. Chitosan/sporopollenin microcapsules were prepared via cross-linking and characterised by employing scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. Sorption performance of the microcapsules and the plain chitosan beads were tested for Cu(II), Cd(II), Cr(III), Ni(II) and Zn(II) ions at different metal ion concentration, pH, amount of sorbent, temperature and sorption time. The adsorption pattern followed Langmuir isotherm model and the sorption capacity of the chitosan/sporopollenin microcapsules was found to be Cu(II): 1.34, Cd(II): 0.77, Cr(III): 0.99, Ni(II): 0.58 and Zn(II): 0.71 mmol g(-1). Plain chitosan beads showed higher affinity for the ions; Cu(II): 1.46, Cr(III): 1.16 and Ni(II): 0.81 mmol g(-1) but lower for Cd(II): 0.15 and Zn(II): 0.25 mmol g(-1). Sporopollenin enhanced Cd(II) and Zn(II) ions sorption capacity of the chitosan microcapsules. Chitosan/sporopollenin microcapsules can be used in Cd(II) and Zn(II) metal removal. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Microfungal spores (Ustilago maydis and U. digitariae) immobilised chitosan microcapsules for heavy metal removal.

    Science.gov (United States)

    Sargın, İdris; Arslan, Gulsin; Kaya, Murat

    2016-03-15

    Designing effective chitosan-based biosorbents from unexploited biomass for heavy metal removal has received much attention over the past decade. Ustilago, loose smut, is a ubiquitous fungal plant pathogen infecting over 4000 species including maize and weed. This study aimed to establish whether the spores of the phytopathogenic microfungi Ustilago spores can be immobilised in cross-linked chitosan matrix, and it reports findings on heavy metal sorption performance of chitosan/Ustilago composite microcapsules. Immobilisation of Ustilago maydis and U. digitariae spores (from maize and weed) in chitosan microcapsules was achieved via glutaraldehyde cross-linking. The cross-linked microcapsules were characterised using scanning electron microscopy, FT-IR spectroscopy and thermogravimetric analysis. Sorption capacities of chitosan-U. maydis and chitosan-U. digitariae microcapsules were investigated and compared to cross-linked chitosan beads: Cu(II): 66.72, 69.26, 42.57; Cd(II): 49.46, 53.96, 7.87; Cr(III): 35.88, 49.40, 43.68; Ni(II): 41.67, 33.46, 16.43 and Zn(II): 30.73, 60.81, 15.04mg/g, respectively. Sorption experiments were conducted as a function of initial metal ion concentration (2-10mg/L), contact time (60-480min), temperature (25, 35 and 45°C), amount of the sorbent (0.05-0.25g) and pH of the metal solution. The microcapsules with spores exhibited better performance over the plain chitosan beads, demonstrating their potential use in water treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Construction of doxycycline-mediated BMP-2 transgene combining with APA microcapsules for bone repair.

    Science.gov (United States)

    Qian, Dongyang; Bai, Bo; Yan, Guangbin; Zhang, Shujiang; Liu, Qi; Chen, Yi; Tan, Xiaobo; Zeng, Yanjun

    2016-01-01

    The repairing of large segmental bone defects is difficult for clinical orthopedists at present. Gene therapy is regarded as a promising method for bone defects repair. The present study aimed to construct an effective and controllable Tet-On expression system for transferring hBMP-2 gene into bone marrow mesenchymal progenitor cells (BMSCs). Meanwhile, with combination of alginate-poly-L-lysine-alginate (APA) microencapsulation technology, we attempted to reduce the influence of immunologic rejection and examine the effect of the Tet-On expression system on osteogenesis of BMSCs. The adenovirus encoding hBMP-2 (ADV-hBMP2) was constructed using the means of molecular cloning. The ADV-hBMP2 and Adeno-X Tet-On virus was respectively transfected to the HEK293 for amplification and afterward BMSCs were co-infected with the virus of ADV-hBMP2 and the Adeno-X Tet-On. The expression of hBMP-2 was measured with induction by doxycycline (DOX) at different concentration by means of RT-PCR and ELISA. Combining Tet-On expression system and APA microcapsules with the use of the pulsed high-voltage electrostatic microcapsule instrument, we examined the expression level of hBMP-2 in APA microcapsules by ELISA as well as the osteogenesis by alizarin red S staining. An effective Tet-On expression system for transferring hBMP-2 gene into BMSCs was constructed successfully. Also, the expression of hBMP-2 could be regulated by concentration of DOX. The data exhibited that BMSCs in APA microcapsules maintained the capability of proliferation and differentiation. The combination of Tet-On expression system and APA microcapsules could promote the osteogenesis of BMSCs. According to the results, microencapsulated Tet-On expression system showed the effective characteristics of secreting hBMP-2 and enhancing osteogenesis, which would provide a promising way for bone repair.

  5. Microcapsular imaging of malignant tumors and radiation induced release of liquid-core microcapsules for their treatment

    International Nuclear Information System (INIS)

    Harada, S.; Ehara, S.; Ishii, K.; Sato, T.; Enatsu, M.; Kamiya, T.; Sera, K.; Goto, S.

    2013-01-01

    Full text: Purpose: Basing on the study of PIXE and Micro PIXE camera, microcapsules of 2 types were designed: (1) CT detectable anti-αvβ3 (E[c(RGDfK)] 2 , microcapsules containing P-selectin and P-selectin glycoprotein ligand-1 (PSGL-1) to observe malignant tumors via αvβ3-antigen-antibody accumulation, and (2) malignant tumors-treating microcapsules that release anticancer drug on irradiation and have a high affinity to P-selectin. To test the ability of these microcapsules for imaging malignant tumors and for treating them, we subject C3He/N mice with MM48 tumor to 2 radiotherapy sessions. Methods and Materials: For the first session, microcapsules were prepared by spraying a mixture of 4.0% alginate, 3.0% hyaluronic acid, and 1 μg E[c(RGDfK)] 2 , (αvβ3 antibody) into 0.5 mmol FeCI 2 , supplemented with 1 μg P-selectin. Microcapsules for the second session were produced by spraying the above-mentioned mixture with 5mg carboplatin into 0.5 mol/L FeCI 2 , containing 0.1 μmol/L of PSGL-1 and the FcSv antibody against P-selectin [1]. In the first session, the microcapsules were intravenously injected, and 6 h later, the incipient metastatic foci were observed using CT. Subsequently, a 10- or 20-Gy 60 Co γ-radiation dose was administered. In the second session, 1 x 10 10 microcapsules were intravenously injected 1 h before P-selectin expression peaked; the microcapsules were allowed to interact with P-selectin for 1-6 h after irradiation in order to deliver sufficient microcapsules. The second session was conducted in a similar manner to the first. The releasing of P-selectin or carboplatin were imaged using micro PIXE camera. The amount of carboplatin (Pt containing anticancer drug) were quantified, using PIXE. Results. The capsule and liquid core sizes (φ) were 2.3 ± 0.92 m and 1.6 ± 0.6 m, respectively. The injected anti-αvβ3 E[c(RGDfK)] 2 , microcapsules accumulated in the vascular endothelium of the incipient metastasis, and their kinetics and

  6. Microcapsular imaging of malignant tumors and radiation induced release of liquid-core microcapsules for their treatment

    Energy Technology Data Exchange (ETDEWEB)

    Harada, S.; Ehara, S. [Department of Radiology, School of Medicine, Iwate Medical University, Iwate (Japan); Ishii, K. [Department of Quantum Science and Energy Engineering, School of Engineering, Tohoku University, Miyagi (Japan); Sato, T.; Enatsu, M.; Kamiya, T. [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, Gunma (Japan); Sera, K. [Cyclotron Center, Iwate Medical University, Iwate (Japan); Goto, S. [Nishina Memorial Cyclotron Center (NMCC), Japan Radioisotope Association, Iwate (Japan)

    2013-07-01

    Full text: Purpose: Basing on the study of PIXE and Micro PIXE camera, microcapsules of 2 types were designed: (1) CT detectable anti-αvβ3 (E[c(RGDfK)]{sub 2}, microcapsules containing P-selectin and P-selectin glycoprotein ligand-1 (PSGL-1) to observe malignant tumors via αvβ3-antigen-antibody accumulation, and (2) malignant tumors-treating microcapsules that release anticancer drug on irradiation and have a high affinity to P-selectin. To test the ability of these microcapsules for imaging malignant tumors and for treating them, we subject C3He/N mice with MM48 tumor to 2 radiotherapy sessions. Methods and Materials: For the first session, microcapsules were prepared by spraying a mixture of 4.0% alginate, 3.0% hyaluronic acid, and 1 μg E[c(RGDfK)]{sub 2}, (αvβ3 antibody) into 0.5 mmol FeCI{sub 2}, supplemented with 1 μg P-selectin. Microcapsules for the second session were produced by spraying the above-mentioned mixture with 5mg carboplatin into 0.5 mol/L FeCI{sub 2}, containing 0.1 μmol/L of PSGL-1 and the FcSv antibody against P-selectin [1]. In the first session, the microcapsules were intravenously injected, and 6 h later, the incipient metastatic foci were observed using CT. Subsequently, a 10- or 20-Gy {sup 60}Co γ-radiation dose was administered. In the second session, 1 x 10{sup 10} microcapsules were intravenously injected 1 h before P-selectin expression peaked; the microcapsules were allowed to interact with P-selectin for 1-6 h after irradiation in order to deliver sufficient microcapsules. The second session was conducted in a similar manner to the first. The releasing of P-selectin or carboplatin were imaged using micro PIXE camera. The amount of carboplatin (Pt containing anticancer drug) were quantified, using PIXE. Results. The capsule and liquid core sizes (φ) were 2.3 ± 0.92 m and 1.6 ± 0.6 m, respectively. The injected anti-αvβ3 E[c(RGDfK)]{sub 2}, microcapsules accumulated in the vascular endothelium of the incipient

  7. The output kinetics of piroxicam from emulsion microcapsules based on high methylated pectin and lactoglobulin of whey in experiments vitro

    International Nuclear Information System (INIS)

    Goibova, Z.V.; Bobokalonov, D.T.; Usmanova, S.R.; Teshaev, Kh.I.; Mukhidinov, Z.K.

    2015-01-01

    Present article is devoted to output kinetics of piroxicam from emulsion microcapsules based on high methylated pectin and lactoglobulin of whey in experiments vitro. The dependence of piroxicam output on time at various mole ratio was studied.

  8. Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles.

    Science.gov (United States)

    Sato, Katsuhiko; Nakajima, Tatsuya; Anzai, Jun-ichi

    2012-12-01

    Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N'-methylenebisacrylamide on the surface of calcium carbonate (CaCO(3)) particles, followed by the dissolution of the CaCO(3) core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO(3) particles and PMMA capsules were 3.8±0.6 and 4.0±0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Preparation and characterization of novel functionalized prochloraz microcapsules using silica-alginate-elements as controlled release carrier materials.

    Science.gov (United States)

    Zhang, Wenbing; He, Shun; Liu, Yao; Geng, Qianqian; Ding, Guanglong; Guo, Mingcheng; Deng, Yufang; Zhu, Juanli; Li, Jianqiang; Cao, Yongsong

    2014-07-23

    Controlled release formulation of pesticides is an effective approach to achieve the desirable purpose of increasing the utilization of pesticides and reducing the environmental residuals. In this work, a novel functionalized microcapsule using silica cross-linked with alginate, and some beneficial elements to crops, was prepared. The microcapsules were structurally characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. The results showed that the microcapsules had a high loading efficiency of prochloraz (about 30% w/w) and could effectively protect prochloraz against degradation under UV irradiation and alkaline conditions, showed sustainable release for at least 60 days, and also likely increased disease resistance due to the element on the surface. Given the advantages of the microcapsules, this delivery system may be extended to other photosensitive or pH-sensitive pesticides in the future.

  10. A silicone rubber based composites using n-octadecane/poly (styrene-methyl methacrylate) microcapsules as energy storage particle

    Science.gov (United States)

    Wu, W. L.; Chen, Z.

    A phase-change energy-storage material, silicone rubber (SR) coated n-octadecane/poly (styrene-methyl methacrylate) (SR/OD/P(St-MMA)) microcapsule composites, was prepared by mixing SR and OD/P(St-MMA) microcapsules. The microcapsule content and silicone rubber coated method were investigated. The morphology and thermal properties of the composites were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and heat storage properties. The results showed that the thermal and mechanical properties of SR/OD/P(St-MMA) composites were excellent when the microcapsules were coated with room temperature vulcanized silicone rubber (RTVSR), of which content was 2 phr (per hundred rubber). The enthalpy value of the composites was 67.6 J g-1 and the composites were found to have good energy storage function.

  11. Controlled release in hard to access places by poly(methyl methacrylate) microcapsules triggered by gamma irradiation

    DEFF Research Database (Denmark)

    Kostrzewska, Malgorzata; Ma, Baoguang; Javakhishvili, Irakli

    2015-01-01

    microcapsules were shown to become permeable after irradiation and release an encapsulated cross-linker, which enables the remotely controlled formation of polydimethylsiloxanes in traditionally unavailable places. Therefore, the activation method has significant implications for industrial application....

  12. Preparation of insulin-containing microcapsules by a layer-by-layer deposition of concanavalin A and glycogen.

    Science.gov (United States)

    Sato, Katsuhiko; Kodama, Daisuke; Endo, Yoshihiro; Anzai, Jun-ichi

    2009-01-01

    The sugar sensitive microcapsules were prepared by a layer-by-layer deposition of concanavalin A (Con A) and glycogen on a calcium carbonate particle containing fluorescein-labeled insulin (F-insulin). The Con A/glycogen multilayer capsules were formed through sugar-lectin interactions by using inner and outer poly(ethyleneimine)/poly(vinyl sulfate) multilayers as supports, while without the supports the microcapsules could not be formed. Fluorescent microscope observations revealed that the capsules thus prepared are spherical in shape with 3-10 microm diameter. The microcapsules released encapsulated F-insulin upon addition of sugars. This is because the added sugars replace glycogen in the binding site of Con A, resulting in the enhanced permeability of the microcapsules to insulin.

  13. Natural Flavonoids as Promising Analgesic Candidates: A Systematic Review.

    Science.gov (United States)

    Xiao, Xiao; Wang, Xiaoyu; Gui, Xuan; Chen, Lu; Huang, Baokang

    2016-11-01

    Due to the chemical structural diversity and various analgesic mechanisms, an increasing number of studies indicated that some flavonoids from medicinal plants could be promising candidates for new natural analgesic drugs, which attract high interests of advanced users and academic researchers. The aim of this systematic review is to report flavonoids and its derivatives as new analgesic candidates based on the pharmacological evidences. Sixty-four papers were found concerning the potential analgesic activity of 46 flavonoids. In this case, the evidence for analgesic activity of flavonoids and total flavonoids was investigated. Meanwhile, the corresponding analgesic mechanism of flavonoids was discussed by generalizing and analyzing the current publications. Based on this review, the conclusion can be drawn that some flavonoids are promising candidates for painful conditions and deserve particular attention in further research and development. © 2016 Wiley-VHCA AG, Zurich, Switzerland.

  14. Thermochromic microcapsules with highly transparent shells obtained through in-situ polymerization of urea formaldehyde around thermochromic cores for smart wood coatings.

    Science.gov (United States)

    Zhu, Xiaodong; Liu, Yu; Li, Zhao; Wang, Weicong

    2018-03-05

    In this paper, thermochromic microcapsules were synthesized in situ polymerization with urea formaldehyde as shell material and thermochromic compounds as core material. The effects of emulsifying agent and conditions on surface morphology and particle size of microcapsules were studied. It was found that the size and surface morphology of microcapsules were strongly depending on stirring rate and the ratio of core to shell. The stable and small size spherical microcapsules with excellent transparency can be obtained at an emulsifying agent to core to shell ratio as 1:5:7.5 under mechanical stirring at 12 krpm for 15 min. Finally, the thermochromic property was discussed by loading microcapsules in wood and wood coatings. Results indicate that microcapsules can realize the thermochromic property while incorporated with wood and coatings, and could have high potential in smart material fabrication.

  15. Properties of n-eicosane-filled microcapsules with different morphology. Phase Change Materials studied by positron spectroscopy and complementary methods

    Energy Technology Data Exchange (ETDEWEB)

    Zgardzińska, B., E-mail: bozena.zgardzinska@poczta.umcs.lublin.pl [Department of Nuclear Methods, Institute of Physics, Maria Curie-Sklodowska University, Pl. M. Curie-Sklodowskiej 1, 20-031 Lublin (Poland); Filipek, M. [Department of Nuclear Methods, Institute of Physics, Maria Curie-Sklodowska University, Pl. M. Curie-Sklodowskiej 1, 20-031 Lublin (Poland); Fortuniak, W. [Center of Molecular and Macromolecular Studies, Polish Academy of Sciences, Sienkiewicza 112, 90-363 Łódź (Poland); Mroczek, P. [Department of Geoecology and Palaeogeography, Faculty of Earth Sciences and Spatial Management, Maria Curie-Sklodowska University, Al. Kraśnicka 2cd, 20-718 Lublin (Poland)

    2016-07-01

    The Positron Annihilation Lifetime Spectroscopy (PALS) was used to investigate properties of selected Phase Change Materials (PCMs) as a function of temperature from 123 K to 333 K. Three different PCM microcapsules investigated in this work were built of n-eicosane filling and a siloxane polymer as a shell material. It has been found that the properties of ortho-positronium (o-Ps) annihilating in n-eicosane filler depend on the microcapsule morphology. In the samples where the whole interior is composed of n-eicosane and the polymer forms the outer shell only, the n-eicosane behaves like a neat macroscopic sample. In the microcapsules containing the network of polymer threads inside the globule, n-eicosane shows no rise of o-Ps intensity with time which is typical for all pure alkanes. For this morphology, the melting point of n-eicosane is preceded by the 4 K wide temperature range, where the structure resembling the rotator phase is observed (rotator phase appears in neat even-numbered alkanes with carbon chain over 20 atoms). Supplementary data were obtained by the DSC method. SEM images confirmed the morphological differentiation of microcapsules. Low temperature (close to liquid nitrogen) destroys the structure of microcapsules, particularly their outer shell. - Highlights: • Polymer-alkane microcapsules were synthesized with different morphology. • Morphological diversity of microcapsules is reflected in the parameters of the PALS. • PALS show the effect of spatial limitations on the formation of lamellar structure. • PALS is a new way to determine the percentage of microcapsules components.

  16. Synthesis and Characterisation of Aminoplast Microcapsules for Controlled Release of Bioactives. Influence of the Resin:Oil Ratio

    OpenAIRE

    Sánchez Navarro, M. Magdalena; Arán Aís, Francisca; Marcilla, Antonio; Orgilés-Barceló, César

    2015-01-01

    In this study a series of melamine-formaldehyde (MF) microcapsules containing Melaleuca alternifolia oil as natural biocide with different polymer to oil ratio was prepared by the in situ polymerization (O/W) method. The characterization of the microcapsules properties was undertaken by different experimental techniques in order to establish a correlation between the polymer to oil ratio and the oil encapsulation efficiency and properties for further applications. The average size distributio...

  17. FORMULATION DEVELOPMENT OF MUCOADHESIVE MICROCAPSULES OF METFORMIN HYDROCHLORIDE USING NATURAL AND SYNTHETIC POLYMERS AND IN VITRO CHARACTERIZATION

    OpenAIRE

    Yellanki Shiva Kumar; Deb Sambit kumar; Goranti Sharada; Nerella Naveen kumar

    2010-01-01

    The objective of this work was to develop optimized and systematically evaluate performances of mucoadhesive microcapsules of antihyperglycemic agent drug Metformin. Alginate microcapsules coated with mucoadhesive natural or synthetic polymers were prepared by Orifice-Ionic Gelation technique utilizing calcium chloride as a cross linking agent. The effect of type (natural or synthetic) and concentration of coating polymers and concentration of alginate on formulation was investigated. Prepare...

  18. Reimbursement of analgesics for chronic pain.

    Science.gov (United States)

    Pedersen, Line; Hansen, Anneli Borge; Svendsen, Kristian; Skurtveit, Svetlana; Borchgrevink, Petter C; Fredheim, Olav Magnus S

    2012-11-27

    The prevalence of chronic non-malignant pain in Norway is between 24% and 30%. The proportion of the population using opioids for non-malignant pain on a long-term basis is around 1%. The purpose of our study was to investigate how many were prescribed analgesics on reimbursable prescription under reimbursement code -71 (chronic non-malignant pain) in 2009 and 2010, which analgesics were prescribed and whether prescribing practices were in accordance with national guidelines. We retrieved pseudonymised data from the National Prescription Database on all those who received drugs with reimbursement code -71 in 2009 and 2010. The data contain information on drug, dosage, formulation, reimbursement code and date of issue. 90,731 patients received reimbursement for drugs indicated for chronic non-malignant pain in 2010. Of these, 6,875 were given opioids, 33,242 received paracetamol, 25,865 non-steroid inflammatory drugs (NSAIDs), 20,654 amitryptiline and 16,507 gabapentin. Oxycodone was the most frequently prescribed opioid, followed by buprenorphine, tramadol and codeine/paracetamol. Of those who were prescribed opioids, 4,047 (59%) received mainly slow-release opioids, 2,631 (38%) also received benzodiazepines and 2,418 (35%) received benzodiazepine-like sleep medications. The number of patients who received analgesics and opioids on reimbursable prescriptions was low compared to the proportion of the population with chronic pain and the proportion using opioids long-term. 38% of those reimbursed for opioids also used benzodiazepines, which is contrary to official Norwegian guidelines.

  19. Breaking barriers to novel analgesic drug development.

    Science.gov (United States)

    Yekkirala, Ajay S; Roberson, David P; Bean, Bruce P; Woolf, Clifford J

    2017-08-01

    Acute and chronic pain complaints, although common, are generally poorly served by existing therapies. This unmet clinical need reflects a failure to develop novel classes of analgesics with superior efficacy, diminished adverse effects and a lower abuse liability than those currently available. Reasons for this include the heterogeneity of clinical pain conditions, the complexity and diversity of underlying pathophysiological mechanisms, and the unreliability of some preclinical pain models. However, recent advances in our understanding of the neurobiology of pain are beginning to offer opportunities for developing novel therapeutic strategies and revisiting existing targets, including modulating ion channels, enzymes and G-protein-coupled receptors.

  20. Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration

    Directory of Open Access Journals (Sweden)

    Zeinab Alinejad

    2013-05-01

    Full Text Available Microcapsules containing n-hexadecane (HD as the core and melamineformaldehyde (MF prepolymer as the shell were prepared by in-situ dispersion polymerization. The effects of surfactants type and amount were studied in relation to the morphology and thermal properties of microcapsules. The morphology of the microcapsules was studied using scanning electron microscopy (SEM and thermal properties were detected by differential scanning calorimetry (DSC and thermogravimetric analysis (TGA. SEM images showed that the increase in the amount of Triton X-100 (non-ionic to SDS (ionic ratio resulted in the agglomeration of the prepared microcapsules. This increase led also to lower encapsulated hexadecane and thermal stability of microcapsules. As a result, the optimum composition of the above surfactants for obtaining higher thermal stability and proper morphology wasfound to be 20 wt% of Triton X-100 and 80 wt% of SDS in the recipe. The optimum total amounts of surfactants was 4 wt%, which resulted in spherical and separate microcapsules. DSC and TGA analyses revealed that a sample prepared with 4 wt% of surfactants was not only successful in encapsulation of hexadecane but also showedhigher thermal stability compared with other formulations.

  1. Pain treatment after tonsillectomy: advantages of analgesics regularly given compared with analgesics on demand.

    Science.gov (United States)

    Thorneman, G; Akervall, J

    2000-10-01

    The aim of the present prospective study was to evaluate pain treatment during the first postoperative 24 h for 40 patients (age over 18) undergoing tonsillectomy. Patients were divided into two groups: group A (n = 20) received analgesics on demand and group B (n = 20) on a regular basis. Basic pain treatment consisted of paracetamol 750 mg x 6 and diclofenac 50 mg x 3. Pain measurement was performed using a visual analogue scale (VAS): a 10 cm line with 0 cm equalling no pain and 10 cm equalling the worst pain ever felt. The following parameters were studied: VAS values, the need for rescue analgesics, intra- and postoperative bleeding, nausea and vomiting, postoperative food intake and hospital time. Only 4 of 20 (20%) patients in group B needed rescue analgesics in the postoperative ward compared with 15 of 20 (75%) in group A (p values were generally rather low in both groups. The mean value for all observed VAS values was less than 4 in both study groups. However, no significant difference in VAS values was observed between the two study groups. Our results suggest that regularly given postoperative pain treatment after tonsillectomy, starting intraoperatively with paracetamol and diclofenac, has significant advantages compared with a regimen in which patients receive analgesics only on demand.

  2. Microcapsules loaded with the probiotic Lactobacillus paracasei BGP-1 produced by co-extrusion technology using alginate/shellac as wall material: Characterization and evaluation of drying processes.

    Science.gov (United States)

    Silva, Marluci P; Tulini, Fabricio L; Ribas, Marcela M; Penning, Manfred; Fávaro-Trindade, Carmen S; Poncelet, Denis

    2016-11-01

    Microcapsules containing Lactobacillus paracasei BGP-1 were produced by co-extrusion technology using alginate and alginate-shellac blend as wall materials. Sunflower oil and coconut fat were used as vehicles to incorporate BGP-1 into the microcapsules. The microcapsules were evaluated with regard the particle size, morphology, water activity and survival of probiotics after 60days of storage at room temperature. Fluidized bed and lyophilization were used to dry the microcapsules and the effect of these processes on probiotic viability was also evaluated. Next, dried microcapsules were exposed to simulated gastrointestinal fluids to verify the survival of BGP-1. Microcapsules dried by fluidized bed had spherical shape and robust structures, whereas lyophilized microcapsules had porous and fragile structures. Dried microcapsules presented a medium size of 0.71-0.86mm and a w ranging from 0.14 to 0.36, depending on the drying process. When comparing the effects of drying processes on BGP-1 viability, the fluidized bed was less aggressive than lyophilization. The alginate-shellac blend combined with coconut fat as core effectively protected the encapsulated probiotic under simulated gastrointestinal conditions. Thus, the production of microcapsules by co-extrusion followed by drying using the fluidized bed is a promising strategy for protection of probiotic cells. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Analgesic Microneedle Patch for Neuropathic Pain Therapy.

    Science.gov (United States)

    Xie, Xi; Pascual, Conrado; Lieu, Christopher; Oh, Seajin; Wang, Ji; Zou, Bende; Xie, Julian; Li, Zhaohui; Xie, James; Yeomans, David C; Wu, Mei X; Xie, Xinmin Simon

    2017-01-24

    Neuropathic pain caused by nerve injury is debilitating and difficult to treat. Current systemic pharmacological therapeutics for neuropathic pain produce limited pain relief and have undesirable side effects, while current local anesthetics tend to nonspecifically block both sensory and motor functions. Calcitonin gene related peptide (CGRP), a neuropeptide released from sensory nerve endings, appears to play a significant role in chronic neuropathic pain. In this study, an analgesic microneedle (AMN) patch was developed using dissolvable microneedles to transdermally deliver selective CGRP antagonist peptide in a painless manner for the treatment of localized neuropathic pain. Local analgesic effects were evaluated in rats by testing behavioral pain sensitivity in response to thermal and mechanical stimuli using neuropathic pain models such as spared-nerve injury and diabetic neuropathy pain, as well as neurogenic inflammatory pain model induced by ultraviolet B (UVB) radiation. Unlike several conventional therapies, the AMN patches produced effective analgesia on neuropathic pain without disturbing the normal nociception and motor function of the rat, resulting from the high specificity of the delivered peptide against CGRP receptors. The AMN patches did not cause skin irritation or systemic side effects. These results demonstrate that dissolvable microneedle patches delivering CGRP antagonist peptide provide an effective, safe, and simple approach to mitigate neuropathic pain with significant advantages over current treatments.

  4. Removal of Radioactive Nuclides by Multi-Functional Microcapsules Enclosing Inorganic Ion-Exchangers and Organic Extractants

    Energy Technology Data Exchange (ETDEWEB)

    Mimura, H.; Akiba, K.; Onodera, Y.

    2002-02-26

    The microcapsules enclosing two kinds of functional materials, inorganic ion-exchangers and organic extractants, were prepared by taking advantage of the high immobilization ability of alginate gel polymer. The fine powders of inorganic ion-exchanger and oil drops of extractant were kneaded with sodium alginate (NaALG) solution and the kneaded sol readily gelled in a salt solution of CaCl2, BaCl2 or HCl to form spherical gel particles. The uptake properties of various nuclides, 137Cs, 85Sr, 60Co, 88Y, 152Eu and 241Am, for thirty-four specimens of microcapsules in the presence of 10-1-10-4 M HNO3 were evaluated by the batch method. The distribution coefficient (Kd) of Cs+ above 103 cm3/g was obtained for the microcapsules enclosing CuFC or AMP. The Kd of Sr2+ around 102 cm3/g was obtained for the microcapsules containing clinoptilolite, antimonic acid, zeolite A, zeolite X or titanic acid. The microcapsules enclosing DEHPA exhibited relatively large Kd values of trivalent metal ions above 103 cm3/g; for example, the Kd values of Cs+, Sr2+, Co2+, Y3+, Eu3+ and Am3+ for a favorable microcapsule (CuFC/clinoptilolite/DEHPA/CaALG) were 1.1x104, 7.5x10, 1.1x10, 1.0x104, 1.4x104, 3.4x103 cm3/g, respectively. The uptake rates of Cs+, Y3+, Eu3+ and Am3+ for this microcapsule were rather fast; the uptake percentage above 90% was obtained after 19 h-shaking and the uptake equilibrium was attained within 1 d. The AMP/CaALG exhibited high uptake ability for Cs+ even after irradiation of 188 kGy, and DEHPA/CaALG microcapsule had similar Kd values of Cs+, Sr2+, Co2+, Y3+, Eu3+ and Am3+ ions before and after irradiation. The microcapsules with various shapes such as spherical, columnar, fibrous and filmy forms were easily prepared by changing the way of dipping kneaded sol into gelling salt solution. The microcapsules enclosing inorganic ion-exchangers and extractants have a potential possibility for the simultaneous removal of various radioactive nuclides from waste solutions.

  5. Synthesis of durable microcapsules for self-healing anticorrosive coatings: A comparison of selected methods

    DEFF Research Database (Denmark)

    Nesterova, Tatyana; Dam-Johansen, Kim; Kiil, Søren

    2011-01-01

    -based anticorrosive coatings, based on incorporation of microcapsules, filled with reactive agents, into the coating matrix, is investigated. Upon small damages to the coating, the reagents are released from the capsules and react, thereby forming a cross-linked network, which heals the crack. However......Self-healing materials have the ability to ‘repair’ themselves upon exposure to an external stimulus. In the field of coatings, extensive laboratory research has been conducted on these so-called smart materials in the last decade. In the present work, a self-healing concept for epoxy......, for the concept to work, microcapsules have to be strong enough to remain intact during storage and coating formulation and application. Furthermore, the capsules must remain stable for many years in the dry coating. Laboratory experiments, using four out of several encapsulation methods available...

  6. The use of thermally expandable microcapsules for increasing the toughness and heal structural adhesives

    Directory of Open Access Journals (Sweden)

    Chiaki Sato

    2011-04-01

    Full Text Available In this research, the effect of thermally expandable microcapsules (TEMs on mode I fracture toughness of structural adhesives were investigated. The single-edge-notch bending (SENB test was used. Firstly, a standard toughness test was performed on adhesives with microcapsules. Secondly, since TEMs start their expansion at approximately 60ºC, the next specimens were fatigue tested expecting a local heating in the notch leading to the desired expansion before being statically loaded for fracture toughness determination. Thirdly, a manual local heating at 90ºC was applied in the notch before the fracture static test. The experimental results were successfully cross-checked through a numerical analysis using the virtual crack closure technique (VCCT based on linear elastic fracture mechanics (LEFM. The major conclusion is that fracture toughness of the modified adhesives increased as the mass fraction of the TEMs increased.

  7. Rheological and thermal properties of suspensions of microcapsules containing phase change materials.

    Science.gov (United States)

    Cao, Vinh Duy; Salas-Bringas, Carlos; Schüller, Reidar Barfod; Szczotok, Anna M; Hiorth, Marianne; Carmona, Manuel; Rodriguez, Juan F; Kjøniksen, Anna-Lena

    2018-01-01

    The thermal and rheological properties of suspensions of microencapsulated phase change materials (MPCM) in glycerol were investigated. When the microcapsule concentration is raised, the heat storage capacity of the suspensions becomes higher and a slight decline in the thermal conductivity of the suspensions is observed. The temperature-dependent shear-thinning behaviour of the suspensions was found to be strongly affected by non-encapsulated phase change materials (PCM). Accordingly, the rheological properties of the MPCM suspensions could be described by the Cross model below the PCM melting point while a power law model best described the data above the PCM melting point. The MPCM suspensions are interesting for energy storage and heat transfer applications. However, the non-encapsulated PCM contributes to the agglomeration of the microcapsules, which can lead to higher pumping consumption and clogging of piping systems.

  8. Treatment of high-latency microcapsules containing an aluminium complex with an epoxy-functionalised trialkoxysilane.

    Science.gov (United States)

    Kamiya, Kazunobu; Suzuki, Noboru

    2016-12-01

    Some aluminium complexes are excellent catalysts of cationic polymerisation and are used for low-temperature and fast-curing adhesive, used in electronic part mounting. Microencapsulation is a suitable technique for getting high latency of the catalysts and long shelf life of the adhesives. For the higher latency in a cycloaliphatic epoxy compound, the microcapsule surface which retained small amount of aluminium complex was coated with epoxy polymer and the effect was examined. From the X-ray photoelectron spectroscopic results, the surface was recognised to be sufficiently coated and the differential scanning calorimetric analyses showed that the coating did not significantly affect the low-temperature and fast-curing properties of adhesive. After storing the mixture of cycloaliphatic epoxy compound, coated microcapsules, triphenylsilanol and silane coupling agent for 48 h at room temperature, the increase in viscosity was only 0.01 Pa s, resulting in the excellent shelf life.

  9. The Phytochemical Constituents, Analgesic and Anti-inflammatory ...

    African Journals Online (AJOL)

    The analgesic and anti-inflammatory effects of the methanolic extract of the leaves of Jatropha curcas were investigated in mice and rats respectively. The phytochemical screening of the extract was also carried out. The analgesic effect was determined by acetic acid – induced writhing test in mice. While the anti- ...

  10. The usage and efficacy of a combination analgesic preparation ...

    African Journals Online (AJOL)

    Combination analgesics are frequently prescribed for the treatment of a multitude of conditions. Many of these preparations contain agents with no proven analgesic efficacy. We examined 3059 patients using a new combination agent containing only paracetamol, codeine, and ibuprofen. It appears that despite a wide ...

  11. Anti-inflammatory and analgesic activity of water extract from ...

    African Journals Online (AJOL)

    This study was done to evaluate the antiinflammatory and analgesic activities of the water extract of the plant in experimental animal models (anti-inflammatory action by carrageenan-induced rat paw edema, the analgesic activity by acetic acid-induced writhing response method. The water extract of I. asarifolia in doses of ...

  12. Retrospective Evaluation of Analgesics Prescribing Pattern in a ...

    African Journals Online (AJOL)

    The study was designed to retrospectively evaluate the analgesics prescribing pattern in the Accident and Emergency (A and E) Unit of University of Benin Teaching Hospital, Benin City. The data was retrieved from the pharmacy archives type of analgesics and its routes of administration whether oral or parenteral in all ...

  13. The analgesic effect of different antidepressants combined with ...

    African Journals Online (AJOL)

    Background: Combination analgesics provide more effective pain relief for a broader spectrum of pain. This research examines the possible potentiation of the analgesic effect of different classes of antidepressants when combined with aspirin in thermal model of pain using Albino mice. Methods: Different groups of six ...

  14. Pharmacological studies of Anti-inflammatory, Analgesic and ...

    African Journals Online (AJOL)

    Parimala Krishnan

    of analgesic drugs produce serious adverse effects, such as GI disturbances, renal damages (with NSAIDs drugs), respiratory depression and possibly dependence (with opioids). It is understandable that proposition of analgesic agents with fewer adverse effects is desirable. One of the ways to achieve this aim is the use of ...

  15. Analgesic effect of the aqueous seed extract of Persea Americana ...

    African Journals Online (AJOL)

    Persea americana, Mill (Lauraceae) is one of the medicinal plants used in Nigeria for pain relief. Based on its ethnomedicinal use in pain management, the seed of the plant was extracted with distilled water and screened for analgesic activity. The analgesic screening was done in mice using four models: acetic ...

  16. Factors influencing use of analgesics among construction workers in ...

    African Journals Online (AJOL)

    2Department of Social and Behavioural Sciences, School of Public Health, University of Ghana, Legon. Corresponding ... Many respondents (68.0%) used Brand 1 a locally manufactured analgesic with paracetamol ... advertisements for analgesics in the media. Funding: .... based on awareness of its use, required dosage,.

  17. Analgesic properties of Capraria biflora leaves aqueous extract.

    Science.gov (United States)

    Acosta, S L; Muro, L V; Sacerio, A L; Peña, A R; Okwei, S N

    2003-12-01

    The analgesic properties of dried leaves of Capraria biflora were investigated. The aqueous extract (50-200 mg kg(-1)) produced moderate inhibition of acetic acid-induced writhing in mice. At the same doses, a better analgesic effect was observed on the hot plate test.

  18. The labour ward analgesic service at King Edward VIII Hospital ...

    African Journals Online (AJOL)

    The labour ward analgesic service at King Edward VIII. Hospital, Durban. D. A. ROCKE, C. C. ROUT, H. D. RUSSELL, S. SINGH. Abstract The provision of analgesic services to the labour ward at King Edward VIII Hospital was studied during a I-week period. Of249 patients, 113 (45%) received no analgesia whatsoever.

  19. Comparative analgesic activity of the root bark, stem bark, leaves ...

    African Journals Online (AJOL)

    The analgesic activity of the water extracts (50,100 and150 mg/Kg body weight) of the root bark, stem bark, leaves, fruits and seeds of Carissa edulis were evaluated in mice using the mechanical method (tail-chip method) and chemical method (acetic acid induced writhing). The plant was found to have analgesic activity, ...

  20. Enhancement in thermal property and mechanical property of phase change microcapsule with modified carbon nanotube

    International Nuclear Information System (INIS)

    Li, Min; Chen, Meirong; Wu, Zhishen

    2014-01-01

    Highlights: • Carbon nanotubes was grafted and used to enhance the thermal conductivities of the microcapsules. • The average particle size of the prepared MicroPCMs/CNTs-SA is 0.1 μm. • The thermal conductivity of MicroPCMs/CNTs-SA with 4% of CNTs increased by 79.2% compared with MicroPCMs. • MicroPCMs/CNTs-SA has better durability and thermal stability compared to the original MicroPCMs. - Abstract: Carbon nanotubes grafted with stearyl alcohol (CNTs-SA) was used in synthesizing phase change microcapsules (MicroPCMs) in order to enhance the thermal conductivities of the microcapsules. Urea–formaldehyde resin (UFR) was used as wall material. Scanning Electron Microscope (SEM), laser particle size analyzer, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimeter (DSC) are employed to characterize the prepared MicroPCMs containing the grafted CNTs (MicroPCMs/CNTs-SA). The results indicated that CNTs improved the performance of microcapsules. The average particle diameter of MicroPCMs/CNTs-SA is much smaller than that of MicroPCMs. There was no chemical reaction among paraffin, CNTs and UFR. The phase change temperature and latent heat of MicroPCMs/CNTs-SA was 26.2 °C and 47.7 J/g, respectively. The thermal conductivity of MicroPCMs/CNTs-SA with 4% of CNTs increased by 79.2% compared with MicroPCMs. The initial decomposition temperature of MicroPCMs/CNTs-SA is 38 °C higher than that of MicroPCMs. After 100 heating and cooling cycles, MicroPCMs/CNTs-SA still has good durability and thermal stability

  1. Using analgesics as tools: young women's treatment for headache

    DEFF Research Database (Denmark)

    Hansen, Dana Lee; Hansen, Ebba Holme; Holstein, Bjørn E

    2008-01-01

    In this study, the authors explore the context surrounding young women's use of analgesics to deal with headache. In-depth interviews were conducted with 20 young women between the ages of 16 and 20 in Copenhagen, Denmark. Interviews focused on the young women's experiences with medications within...... performance- and participation-related functions. Accordingly, analgesics were employed as tools to reach these aims. The threshold for turning to analgesics varied across situations and among participants. Some relied heavily on analgesics, whereas others had success with non-medical strategies. This study...... the context of their everyday lives. The central elements in the participants' accounts emerged via a phenomenological approach. Analysis revealed that participants attributed headache to stressful conditions in their everyday lives. Analgesic use in treating headache was found to serve highly valued...

  2. Robust microcapsules with controlled permeability from silk fibroin reinforced with graphene oxide.

    Science.gov (United States)

    Ye, Chunhong; Combs, Zachary A; Calabrese, Rossella; Dai, Hongqi; Kaplan, David L; Tsukruk, Vladimir V

    2014-12-29

    Robust and stable microcapsules are assembled from poly-amino acid-modified silk fibroin reinforced with graphene oxide flakes using layer-by-layer (LbL) assembly, based on biocompatible natural protein and carbon nanosheets. The composite microcapsules are extremely stable in acidic (pH 2.0) and basic (pH 11.5) conditions, accompanied with pH-triggered permeability, which facilitates the controllable encapsulation and release of macromolecules. Furthermore, the graphene oxide incorporated into ultrathin LbL shells induces greatly reinforced mechanical properties, with an elastic modulus which is two orders of magnitude higher than the typical values of original silk LbL shells and shows a significant, three-fold reduction in pore size. Such strong nanocomposite microcapsules can provide solid protection of encapsulated cargo under harsh conditions, indicating a promising candidate with controllable loading/unloading for drug delivery, reinforcement, and bioengineering applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Preparation of polyurethane microcapsule using 1,3 propanediol as the polyol component

    International Nuclear Information System (INIS)

    Ahmad Randy; Dewi Sondari; Evi Triwulandari; Murni Handayani

    2010-01-01

    Self-healing property is the ability of a material to heal damages automatically and autonomously. Its application would be ranged from paint coating, anti corrosion coating, space shuttle material, construction (concrete) and automotive. Extrinsic self healing requires self healing agent pre embedded or incorporated into polymer matrix that would be released and close the damage in the polymer system, where the polymer itself is not healable. Healing agents are encapsulated or embedded into the material prior application. Example of monomer encapsulated to give self healing property is isophorone diisocyanate (IPDI) encapsulated in polyurethane shell. In this study, we studied the possibility of 1,3 propanediol, that can be derived from palm oil as polyol monomer for polyurethane microcapsule shell containing IPDI or stannous octoate as a self healing agent. Microcapsule in this study was prepared by interfacial polymerization technique to form IPDI monomer in polyurethane shell. FT-IR analysis show that polyurethane prepolymer produced still have unreacted isocyanate group necessary for interfacial polymerization of polyurethane. Morphological analyses of the microcapsule products show that the products have spherical shapes with smooth surface and some with wrinkled surface. The particle sizes were ranged from 40.29 to 526.80 μm. (author)

  4. Preparation of Microcapsules Containing β-Carotene with Thermo Sensitive Curdlan by Utilizing Reverse Dispersion

    Directory of Open Access Journals (Sweden)

    Yoshinari Taguchi

    2013-11-01

    Full Text Available We have tried to microencapsulate β-carotene with curdlan of a thermogelation type polysaccharide. Microcapsules were prepared by utilizing reverse dispersion, in which salada oil was the continuous phase (O’ and the curdlan water slurry (W was the dispersed phase. β-carotene (O as a core material was broken into fine oil droplets in the dispersed phase to form the (O/W dispersion. The (O/W dispersion was poured in the continuous phase (O’ and stirred to form the (O/W/O’ dispersion at room temperature and then, temperature of the dispersion was raised to 80 °C to prepare curdlan-microcapusles containing β-carotene. In this microencapsulation process, the concentrations of curdlan and oil soluble surfactant and the impeller speed to form the (O/W/O’ dispersion were mainly changed stepwise. We were able to prepare microcapsules by the microencapsulation method adopted here. The content of core material was increased with the curdlan concentration and decreased with the impeller speed and the oil soluble surfactant concentration. With the curdlan concentration, the drying rate of microcapsules was decreased and the retention ability for water was increased due to the stable preservation of β-carotene.

  5. Microcapsules and 3D customizable shelled microenvironments from laser direct-written microbeads.

    Science.gov (United States)

    Kingsley, David M; Dias, Andrew D; Corr, David T

    2016-10-01

    Microcapsules are shelled 3D microenvironments, with a liquid core. These core-shelled structures enable cell-cell contact, cellular proliferation and aggregation within the capsule, and can be utilized for controlled release of encapsulated contents. Traditional microcapsule fabrication methods provide limited control of capsule size, and are unable to control capsule placement. To overcome these limitations, we demonstrate size and spatial control of poly-l-lysine and chitosan microcapsules, using laser direct-write (LDW) printing, and subsequent processing, of alginate microbeads. Additionally, microbeads were used as volume pixels (voxels) to form continuous 3D hydrogel structures, which were processed like capsules, to form custom shelled aqueous-core 3D structures of prescribed geometry; such as strands, rings, and bifurcations. Heterogeneous structures were also created with controlled initial locations of different cell types, to demonstrate the ability to prescribe cell signaling (heterotypic and homotypic) in co-culture conditions. Herein, we demonstrate LDW's ability to fabricate intricate 3D structures, essentially with "printed macroporosity," and to precisely control structural composition by bottom-up fabrication in a bead-by-bead manner. The structural and compositional control afforded by this process enables the creation of a wide range of new constructs, with many potential applications in tissue engineering and regenerative medicine. Biotechnol. Bioeng. 2016;113: 2264-2274. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  6. Methods of PCM microcapsules application and the thermal properties of modified knitted fabric

    Energy Technology Data Exchange (ETDEWEB)

    Nejman, Alicja, E-mail: anejman@iw.lodz.pl [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland); Cieślak, Małgorzata [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland); Gajdzicki, Bogumił [Textile Research Institute, Scientific Department of Textile Chemistry and Products Modification, 5/15 Brzezinska St., 92-103 Lodz (Poland); Goetzendorf-Grabowska, Bogna; Karaszewska, Agnieszka [Textile Research Institute, Scientific Department of Unconventional Technologies and Textiles, 5/15 Brzezinska St., 92-103 Lodz (Poland)

    2014-08-10

    Highlights: • We applied microcapsules containing n-octadecane for the modification of knitted fabric. • We used printing, coating and padding techniques for the application of microcapsules. • M-PCM application methods allow to regulate the thermal properties of textiles. • M-PCM application methods allow to regulate the air permeability properties of textiles. - Abstract: The aim of the study is to analyze the impact of application methods of microcapsules containing n-octadecane as phase change materials (M-PCM) on the thermal properties and air permeability of modified textile fabric. Polyester knitted fabric, printing, coating and padding methods and polymer pastes with 20 wt.% of M-PCM were used. For the assessment of modification effects the differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were used. DSC analysis showed that the highest enthalpy of phase transitions has printed fabric and the lowest padded fabric. The widest range of phase transitions temperatures was observed for printed fabric, slightly narrower for coated fabric and the narrowest for padded fabric. SEM analysis showed differences in the morphology of modified fabrics depending on incorporation techniques, which are compatible with differences in air permeability results. M-PCM application techniques allow to regulate the thermal and air permeability properties of fabric.

  7. Preparation of Microcapsules Containing β-Carotene with Thermo Sensitive Curdlan by Utilizing Reverse Dispersion

    Science.gov (United States)

    Taguchi, Yoshinari; Ono, Fumiyasu; Tanaka, Masato

    2013-01-01

    We have tried to microencapsulate β-carotene with curdlan of a thermogelation type polysaccharide. Microcapsules were prepared by utilizing reverse dispersion, in which salada oil was the continuous phase (O’) and the curdlan water slurry (W) was the dispersed phase. β-carotene (O) as a core material was broken into fine oil droplets in the dispersed phase to form the (O/W) dispersion. The (O/W) dispersion was poured in the continuous phase (O’) and stirred to form the (O/W)/O’ dispersion at room temperature and then, temperature of the dispersion was raised to 80 °C to prepare curdlan-microcapusles containing β-carotene. In this microencapsulation process, the concentrations of curdlan and oil soluble surfactant and the impeller speed to form the (O/W)/O’ dispersion were mainly changed stepwise. We were able to prepare microcapsules by the microencapsulation method adopted here. The content of core material was increased with the curdlan concentration and decreased with the impeller speed and the oil soluble surfactant concentration. With the curdlan concentration, the drying rate of microcapsules was decreased and the retention ability for water was increased due to the stable preservation of β-carotene. PMID:24300565

  8. In vivo evaluation of EPO-secreting cells immobilized in different alginate-PLL microcapsules.

    Science.gov (United States)

    Ponce, S; Orive, G; Hernández, R M; Gascón, A R; Canals, J M; Muñoz, M T; Pedraz, J L

    2006-11-01

    Alginates are the most employed biomaterials for cell encapsulation due to their abundance, easy gelling properties and apparent biocompatibility. However, as natural polymers different impurities including endotoxins, proteins and polyphenols can be found in their composition. Several purification protocols as well as different batteries of assays to prove the biocompatibility of the alginates in vitro have been recently developed. However, little is known about how the use of alginates with different purity grade may affect the host immune response after their implantation in vivo. The present paper investigates the long-term functionality and biocompatibility of murine erythropoietin (EPO) secreting C2C12 cells entrapped in microcapsules elaborated with alginates with different properties (purity, composition and viscosity). Results showed that independently of the alginate type employed, the animals presented elevated hematocrit levels until day 130, remaining at values between 70-87%. However, histological analysis of the explanted devices showed higher overgrowth around non-biomedical grade alginate microcapsules which could be directly related with higher impurity content of this type of alginate. Although EPO delivery may be limited by the formation of a fibrotic layer around non-biomedical grade alginate microcapsules, the high EPO secretion of the encapsulated cells together with the pharmacodynamic behaviour and the angiogenic and immune-modulatory properties of EPO result in no direct correlation between the biocompatibility of the alginate and the therapeutic response obtained.

  9. Fracture behaviour of a self-healing microcapsule-loaded epoxy system

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available The effect of temperature on the fracture behaviour of a microcapsule-loaded epoxy matrix was investigated. Microencapsulated epoxy and mercaptan-derivative healing agents were incorporated into an epoxy matrix to produce a polymer composite capable of self-healing. Maximum fracture loads were measured using the double-torsion method. Thermal aging at 55 and 110°C for 17 hours [hrs] was applied to heal the pre-cracked samples. The addition of microcapsules appeared to increase significantly the load carrying capacity of the epoxy after healing. Once healed, the composites achieved as much as 93–171% of its virgin maximum fracture load at 18, 55 and 110°C. The fracture behavior of the microcapsule- loaded epoxy matrix was influenced by the healing temperature. The high self-healing efficiency may be attributed to the result of the subsurface micro-crack pinning or deviation, and to a stronger microencapsulated epoxy and mercaptanderivative binder than that of the bulk epoxy. The results show that the healing temperature has a significant effect on recovery of load transferring capability after fracture.

  10. New polyurethane/docosane microcapsules as phase-change materials for thermal energy storage.

    Science.gov (United States)

    Felix De Castro, Paula; Shchukin, Dmitry G

    2015-07-27

    Polyurethane microcapsules were prepared by mini-emulsion interfacial polymerization for encapsulation of phase-change material (n-docosane) for energy storage. Three steps were followed with the aim to optimize synthesis conditions of the microcapsules. First, polyurethane microcapsules based on silicone oil core as an inert template with different silicone oil/poly(ethylene glycol)/4,4'-diphenylmethane diisocyanate wt % ratio were synthesized. The surface morphology of the capsules was analyzed by scanning electronic microscopy (SEM) and the chemical nature of the shell was monitored by Fourier transform infrared spectroscopy (FT-IR). Capsules with the silicone oil/poly(ethylene glycol)/4,4'-diphenylmethane diisocyanate 10/20/20 wt % ratio showed the best morphological features and shell stability with average particle size about 4 μm, and were selected for the microencapsulation of the n-docosane. In the second stage, half of the composition of silicone oil was replaced with n-docosane and, finally, the whole silicone oil content was replaced with docosane following the same synthetic procedure used for silicone oil containing capsules. Thermal and cycling stability of the capsules were investigated by thermal gravimetric analysis (TGA) and the phase-change behavior was evaluated by differential scanning calorimetry (DSC). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Chitosan-carboxymethylcellulose based microcapsules formulation for controlled release of active ingredients from cosmeto textile

    Science.gov (United States)

    Roy, J. C.; Ferri, A.; Salaün, F.; Giraud, S.; Chen, G.; Jinping, G.

    2017-10-01

    Chitosan-based emulsions were prepared at pH from 4.0 to 6.0. The zeta potential and droplet size were monitored at different pH. Double emulsions (wateroil- water) were observed due to the stiff conformation of chitosan at pH 4.0. At pH 5.0, the emulsion droplets were the smallest (2.9 μm) of the experimental pH range. The emulsion droplets were well dispersed due to high surface charge of chitosan (for example, +50 mV at pH 5.5) in entire pH range. The emulsion was treated with carboxymethyl cellulose (CMC) for neutralizing the charged chitosan on the surface of emulsion droplets. Above 10×10-2 mg/ml of CMC, no change in zeta potential was observed indicating no more free chitosan existed after neutralization with CMC. The emulsion was then crosslinked with different amount of glutaraldehyde. Upon increasing the amount of glutaraldehyde, the amount of core content inside the microcapsule and encapsulation efficiency of shell materials decreased gradually. The Dynamic Scanning Calorimetry data confirmed no interaction between core and shell material in the microencapsulation process. The thermal degradation of the microcapsules was examined by thermogravimetric analysis and a gradual decrease in the degradation temperature upon increasing glutaraldehyde concentration was found. The tuning of CMC concentration can provide valuable information regarding stable emulsion and efficient microcapsule formulation via coacervation.

  12. Fabrication of redox-responsive magnetic protein microcapsules from hen egg white by the sonochemical method.

    Science.gov (United States)

    Zhong, Shuangling; Cui, Xuejun; Tian, Fangyuan

    2015-01-01

    Redox-responsive magnetic protein microcapsules with Fe3O4 magnetic nanoparticles (MNPs) encapsulated inside have been obtained using a facile, cost-effective and fast sonochemical method from hen egg white proteins. Such prepared redox-responsive magnetic hen egg white protein microcapsules (MHEWPMCs) could be easily manipulated to do magnetic-guided targeting delivery. The synchronous loading of the hydrophobic dye Coumarin 6 as a model of drug into MHEWPMCs was readily achieved during the fabrication of MHEWPMCs by dissolving them into the oil phase before ultrasonication. TEM images indicated that Fe3O4 MNPs were encapsulated in MHEWPMCs. Confocal laser scanning microscopic images indicated that the dye was distributed evenly in the MHEWPMCs and no leakage of dye from the MHEWPMCs was observed due to the protection of protein shells. The MHEWPMCs are potential candidates as attractive carriers for drug targeting delivery and stimuli-responsive release due to their magnetic and redox responsiveness of the disulfide in the microcapsule shells.

  13. Methods of PCM microcapsules application and the thermal properties of modified knitted fabric

    International Nuclear Information System (INIS)

    Nejman, Alicja; Cieślak, Małgorzata; Gajdzicki, Bogumił; Goetzendorf-Grabowska, Bogna; Karaszewska, Agnieszka

    2014-01-01

    Highlights: • We applied microcapsules containing n-octadecane for the modification of knitted fabric. • We used printing, coating and padding techniques for the application of microcapsules. • M-PCM application methods allow to regulate the thermal properties of textiles. • M-PCM application methods allow to regulate the air permeability properties of textiles. - Abstract: The aim of the study is to analyze the impact of application methods of microcapsules containing n-octadecane as phase change materials (M-PCM) on the thermal properties and air permeability of modified textile fabric. Polyester knitted fabric, printing, coating and padding methods and polymer pastes with 20 wt.% of M-PCM were used. For the assessment of modification effects the differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were used. DSC analysis showed that the highest enthalpy of phase transitions has printed fabric and the lowest padded fabric. The widest range of phase transitions temperatures was observed for printed fabric, slightly narrower for coated fabric and the narrowest for padded fabric. SEM analysis showed differences in the morphology of modified fabrics depending on incorporation techniques, which are compatible with differences in air permeability results. M-PCM application techniques allow to regulate the thermal and air permeability properties of fabric

  14. Standards of analgesic treatment versus hospital practice

    Directory of Open Access Journals (Sweden)

    Anna Lewandowska

    2017-07-01

    Full Text Available Introduction: Pain remedying is a fundamental patient law. Modern medicine is acknowledging the mechanism and the warp of pain, commanding more efficient therapeutic means allowing to control the pain.  Multidirectional pain therapy uses variable techniques and medicines which enables to maximize the analgesic effect during the reduction of side effects of each method. Objective: Evaluation of applying standards of analgesic treatment in hospital practice. Material and methods: There were 100 people with severe pain who underwent surgical and orthopedic treatment, as well as, the ones with chronic pain, staying in neurological ward who took part in the examination. Choice of examined patients was random and embraced hospitals patients in the Podkarpackie voivodeship with “Szpital bez Bólu” (eng.: Hospital without pain certificate.  Examined group comprised of : 57% of women and 44% of men, living in rural (56% and urban (44% area. Research methods used in the examinations, were diagnostic opinion poll, records analysis and pain measurements. Results: 42 % of patients can feel the pain intermittently, 37% is not able to estimate how often do pain ailments occur, however, 21% of people suffer from chronic pain ailments. Patients have estimated their pain as follows: severe (26%, difficult to determine (20%, shooting (16%, burning (15%, radiating (10%, dull (8%, stinging (3% and the one which appears when touched (2%. Having estimated the pain intensity, 53% of respondents claimed that they feel medium pain intensity and 33% claimed to have felt great pain. Nurses in the post-op (54% and anesthesiologist (26% are the one, to inform patient about possibilities and eventual methods of post-operative pain management. Conclusions: Pain limits physical functioning of patient. Five-stage scales included in the examination, were VAS and VRS which are sufficient in prophylaxis and pain alleviation but not entirely readable and understandable for all

  15. Optimization of alginate microcapsules containing cells overexpressing α-l-iduronidase using Box-Behnken design.

    Science.gov (United States)

    Diel, Dirnete; Lagranha, Valeska Lizzi; Schuh, Roselena Silvestri; Bruxel, Fernanda; Matte, Ursula; Teixeira, Helder Ferreira

    2018-01-01

    Mucopolysaccharidosis type I (MPS I) is an autosomal recessive disease caused by deficiency of α-l-iduronidase (IDUA), which results in the lysosomal accumulation of glycosaminoglycans (GAG) leading to widespread clinical manifestations. The microencapsulation of IDUA overexpressing recombinant cells has been considered as a promising strategy for the treatment of MPS I. This study aimed at the optimization of alginate microcapsules containing recombinant BHK (Baby Hamster Kidney) cells (rBHK) overexpressing IDUA produced by electrostatic extrusion technique. The alginate microcapsule (MC-A) optimization study was carried out by means of an experimental Box-Behnken Design that allowed the simultaneous evaluation of the influence of voltage (kV), alginate/cell suspension flow (mL/h), and alginate concentration (%) on size and IDUA activity. The optimal conditions of voltage (10kV), flow (25mL/h), and alginate concentration (1.3%) made possible to obtain the smallest microcapsules showing the highest IDUA activity. After optimization, the microcapsules were sequentially coated with PLL and alginate (MC-APA) to increase their stability. MC-A and MC-APA presented monodisperse populations (span<1.22) with an average diameter of less than 350μm. The coating increased the mechanical stability of MC-APA by about 6-fold and modulated the permeability to the enzyme. Surface analyzes of MC-APA showed the presence of PLL bands, suggesting that the last alginate layer appears to have only partially coated the PLL. After 30days of subcutaneous implantation of the MC-APA microcapsules containing rBHK cells in a MPS I murine model, a significant increase in IDUA activity was observed in the skin near the implant. Histological analysis revealed an inflammatory infiltrate at the application site, which did not prevent the release of the enzyme under the conditions evaluated. Taken together, the overall results demonstrate the feasibility of MC-APA as a potential alternative for

  16. IL-1RA gene-transfected bone marrow-derived mesenchymal stem cells in APA microcapsules could alleviate rheumatoid arthritis.

    Science.gov (United States)

    Hu, Jianhua; Li, Hongjian; Chi, Guanhao; Yang, Zhao; Zhao, Yi; Liu, Wei; Zhang, Chao

    2015-01-01

    In order to investigate the encapsulation of interleukin 1 receptor antagonist (IL-RA) gene-modified mesenchymal stem cells (MSCs) in alginate-poly-L-lysine (APA) microcapsules for the persistent delivery of interleukin 1 receptor antagonist (IL-RA) to treat Rheumatoid arthritis (RA). We transfect mesenchymal stem cells with IL-RA gene, and quantify the IL-RA proteins released from the encapsulated cells followed by microencapsulation of recombinant mesenchymal stem cells, and thus observe the permeability of APA microcapsules and evaluate clinical effects after induction and treatment of collagen-induced arthritis (CIA). The concentration of IL-RA in the supernatant was determined by IL-RA ELISA kit by run in technical triplicates using samples from three separate mice. Encapsulated IL-RA gene-transfected cells were capable of constitutive delivery of IL-RA proteins for at least 30 days. Moreover, the APA microcapsules could inhibit the permeation of fluorescein isothiocyanate-conjuncted immunoglobulin G. Also, it has been found that the APA microcapsules can significantly attenuate collagen induced arthritis after delivering of APA microcapsules to rats. Our results demonstrated that the nonautologous IL-RA gene-transfected stem cells are of potential utility for RA therapy.

  17. Synthesis and Characterization of Stimuli-Responsive Poly(2-dimethylamino-ethylmethacrylate-Grafted Chitosan Microcapsule for Controlled Pyraclostrobin Release

    Directory of Open Access Journals (Sweden)

    Chunli Xu

    2018-03-01

    Full Text Available Controllable pesticide release in response to environmental stimuli is highly desirable for better efficacy and fewer adverse effects. Combining the merits of natural and synthetic polymers, pH and temperature dual-responsive chitosan copolymer (CS-g-PDMAEMA was facilely prepared through free radical graft copolymerization with 2-(dimethylamino ethyl 2-methacrylate (DMAEMA as the vinyl monomer. An emulsion chemical cross-linking method was used to expediently fabricate pyraclostrobin microcapsules in situ entrapping the pesticide. The loading content and encapsulation efficiency were 18.79% and 64.51%, respectively. The pyraclostrobin-loaded microcapsules showed pH-and thermo responsive release. Microcapsulation can address the inherent limitation of pyraclostrobin that is photo unstable and highly toxic on aquatic organisms. Compared to free pyraclostrobin, microcapsulation could dramatically improve its photostability under ultraviolet light irradiation. Lower acute toxicity against zebra fish on the first day and gradually similar toxicity over time with that of pyraclostrobin technical concentrate were in accordance with the release profiles of pyraclostrobin microcapsules. This stimuli-responsive pesticide delivery system may find promising application potential in sustainable plant protection.

  18. Synthesis and Characterization of Stimuli-Responsive Poly(2-dimethylamino-ethylmethacrylate)-Grafted Chitosan Microcapsule for Controlled Pyraclostrobin Release.

    Science.gov (United States)

    Xu, Chunli; Cao, Lidong; Zhao, Pengyue; Zhou, Zhaolu; Cao, Chong; Zhu, Feng; Li, Fengmin; Huang, Qiliang

    2018-03-14

    Controllable pesticide release in response to environmental stimuli is highly desirable for better efficacy and fewer adverse effects. Combining the merits of natural and synthetic polymers, pH and temperature dual-responsive chitosan copolymer (CS- g -PDMAEMA) was facilely prepared through free radical graft copolymerization with 2-(dimethylamino) ethyl 2-methacrylate (DMAEMA) as the vinyl monomer. An emulsion chemical cross-linking method was used to expediently fabricate pyraclostrobin microcapsules in situ entrapping the pesticide. The loading content and encapsulation efficiency were 18.79% and 64.51%, respectively. The pyraclostrobin-loaded microcapsules showed pH-and thermo responsive release. Microcapsulation can address the inherent limitation of pyraclostrobin that is photo unstable and highly toxic on aquatic organisms. Compared to free pyraclostrobin, microcapsulation could dramatically improve its photostability under ultraviolet light irradiation. Lower acute toxicity against zebra fish on the first day and gradually similar toxicity over time with that of pyraclostrobin technical concentrate were in accordance with the release profiles of pyraclostrobin microcapsules. This stimuli-responsive pesticide delivery system may find promising application potential in sustainable plant protection.

  19. ENGINEERING DESIGN: EICOSANE MICROCAPSULES SYNTHESIS AND APPLICATION IN POLYURETHANE FOAMS AIMING TO DIMINISH WHEELCHAIR CUSHION EFFECT ON SKIN TEMPERATURE

    Directory of Open Access Journals (Sweden)

    ELISA M. BERETTA

    2016-12-01

    Full Text Available Thermal comfort of wheelchairs still requires improvements, since users remain on the chair for as long as 12 h a day. Increased sweating makes the skin more susceptible to colonization by fungi and bacteria, and may cause pressure ulcers. In this sense, the microencapsulation of Phase-Change Materials (PCMs may help to enhance wheelchair cushion comfort by regulating heat exchange. This study describes the production of PCM microcapsules and their application in flexible polyurethane foams after expansion, and assesses improvements in heat exchange. Microcapsules with eicosane core coated with melamine-formaldehyde were produced. Eicosane is a thermoregulation agent whose phase-change temperature is near that of the human body’s. Microcapsules were characterized by thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, and Fourier transform infrared spectroscopy. Then, microcapsules were applied on polyurethane foams by vacuum filtration and high-pressure air gun. Samples were exposed to a heat source and analysed by infrared thermography. The results indicate that thermal load increased in samples treated with microcapsules, especially by pressure air gun, and show that it is possible to enhance thermal comfort in wheelchair seats. Thereby, this study contributes to enhance quality of life for wheelchair users, focusing on thermal comfort provided by cushion seats made from PU foam.

  20. Can quantitative sensory testing predict responses to analgesic treatment?

    Science.gov (United States)

    Grosen, K; Fischer, I W D; Olesen, A E; Drewes, A M

    2013-10-01

    The role of quantitative sensory testing (QST) in prediction of analgesic effect in humans is scarcely investigated. This updated review assesses the effectiveness in predicting analgesic effects in healthy volunteers, surgical patients and patients with chronic pain. A systematic review of English written, peer-reviewed articles was conducted using PubMed and Embase (1980-2013). Additional studies were identified by chain searching. Search terms included 'quantitative sensory testing', 'sensory testing' and 'analgesics'. Studies on the relationship between QST and response to analgesic treatment in human adults were included. Appraisal of the methodological quality of the included studies was based on evaluative criteria for prognostic studies. Fourteen studies (including 720 individuals) met the inclusion criteria. Significant correlations were observed between responses to analgesics and several QST parameters including (1) heat pain threshold in experimental human pain, (2) electrical and heat pain thresholds, pressure pain tolerance and suprathreshold heat pain in surgical patients, and (3) electrical and heat pain threshold and conditioned pain modulation in patients with chronic pain. Heterogeneity among studies was observed especially with regard to application of QST and type and use of analgesics. Although promising, the current evidence is not sufficiently robust to recommend the use of any specific QST parameter in predicting analgesic response. Future studies should focus on a range of different experimental pain modalities rather than a single static pain stimulation paradigm. © 2013 European Federation of International Association for the Study of Pain Chapters.

  1. Study on the Properties of Microcapsulated Chlorocyclophosphazene Polypropylene Composites%三聚氯化磷腈微胶囊阻燃剂/聚丙烯复合材料的性能研究

    Institute of Scientific and Technical Information of China (English)

    刘亚青; 赵贵哲

    2007-01-01

    Microcapsulated chlorocyclophosphazenes were synthesized, and then microcapsulated chlorocyclophosphazene/polypropylene(PP) composites were prepared.The results showed that microcapsulated chlorocyclophosphazene had good high thermal stability through thermogravimetric analysis (TGA).The flammability and mechanical properties of microcapsulated chlorocyclophosphazene/polypropylene composites were investigated by limiting oxygen index experiment, UL 94V flame retardancy test, cone calorimetry, tensile experiment, and impact test, respectively.It was shown that the microcapsulated chlorocyclophosphazene/PP composites had better tensile strength, impact strength, flame retardant properties and smoke suppress properties compared with chlorocyclophosphazene/PP composites.

  2. Ultrasonically synthesized organic liquid-filled chitosan microcapsules: part 2: characterization using AFM (atomic force microscopy) and combined AFM-confocal laser scanning fluorescence microscopy.

    Science.gov (United States)

    Mettu, Srinivas; Ye, Qianyu; Zhou, Meifang; Dagastine, Raymond; Ashokkumar, Muthupandian

    2018-04-25

    Atomic Force Microscopy (AFM) is used to measure the stiffness and Young's modulus of individual microcapsules that have a chitosan cross-linked shell encapsulating tetradecane. The oil filled microcapsules were prepared using a one pot synthesis via ultrasonic emulsification of tetradecane and crosslinking of the chitosan shell in aqueous solutions of acetic acid. The concentration of acetic acid in aqueous solutions of chitosan was varied from 0.2% to 25% v/v. The effect of acetic acid concentration and size of the individual microcapsules on the strength was probed. The deformations and forces required to rupture the microcapsules were also measured. Three dimensional deformations of microcapsules under large applied loads were obtained by the combination of Laser Scanning Confocal Microscopy (LSCM) with Atomic Force Microscopy (AFM). The stiffness, and hence the modulus, of the microcapsules was found to decrease with an increase in size with the average stiffness ranging from 82 to 111 mN m-1 and average Young's modulus ranging from 0.4 to 6.5 MPa. The forces required to rupture the microcapsules varied from 150 to 250 nN with deformations of the microcapsules up to 62 to 110% relative to their radius, respectively. Three dimensional images obtained using laser scanning confocal microscopy showed that the microcapsules retained their structure and shape after being subjected to large deformations and subsequent removal of the loads. Based on the above observations, the oil filled chitosan crosslinked microcapsules are an ideal choice for use in the food and pharmaceutical industries as they would be able to withstand the process conditions encountered.

  3. The affection of APA microcapsulation on catecholamine and leucine-enkephalin secretion from the bovine adrenal medullary chromaffin cells

    International Nuclear Information System (INIS)

    Guo Shuilong; Cui Xin; Luo Yun; Xue Yilong

    2002-01-01

    The affection of alginate-polylysine-alginate (APA) microcapsulation on catecholamine (CA) and leucine-enkephalin (L-EK) secretion from bovine adrenal medullary chromaffin cells was analysed. Encapsulating BCCs with the APA microcapsulation, the secretion of CA and L-EK in encapsulated BCCs was detected by high-performance liquid chromatography-electrochemical assay and radioimmunoassay, respectively. There is little difference between the encapsulated BCCs and the non-encapsulated BCCs in the secretion of epinephrine (E) and noradrenaline (NE) but the secretion of dopamine (DA) and L-EK in several points decline. The studies indicated that APA microcapsulation of BCCs didn't affect the secretion of E and NE, but did the secretion DA and L-EK in forepart

  4. Preparation and Characterisation of tri-n-octylamine Microcapsule (TOA-MC) as Selective Separation of Re (VII)

    International Nuclear Information System (INIS)

    Tsai, T.L.; Mimura, H.; Syed, M.R.; Yin, X.B.; Lee, C.P.; Tsai, S.C.

    2015-01-01

    Much attention has been paid on the selective separation and effective utilisation of 99 Tc from high level radioactive liquid waste (HLLW). TOA-MC was developed as an absorbent for Re (VII), a substitute for Tc (VII) due to their similarities of chemical behaviour in this study. The uptake (%), normally above 95% of Re (VII) for TOA-MC in the presence of dilute HNO 3 (0.01∼0.1 M) was strongly retained and decreased with higher HNO 3 concentration by batch method. The surface morphology and thermal stability of microcapsules were characterised by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), respectively. The diameters in the range of 700-800 μm and size distribution of the microcapsules were examined using digital microscope (DM). The chemical structures of the synthesised microcapsules and two starting materials of TOA and sodium alginate (NaALG) were performed using Fourier transform infrared spectroscopy (FTIR). (authors)

  5. Formation of poly(butyl 2-cyanoacrylate) microcapsules and the microencapsulation of aqueous solutions of [125I]-labelled proteins

    International Nuclear Information System (INIS)

    Wood, D.A.; Whateley, T.L.; Florence, A.T.

    1981-01-01

    Some featrues of the polymerization reaction of butyl 2-cyanoacrylate at different aqueous/organic solvent interfaces have been investigated. In particular, the effects of pH and the presence of protein on the formation of microcapsules by in situ interfacial polymerization of butyl 2-cyanoacrylate in w/o emulsions have been studied. [ 125 I]-labelled proteins have been used to study the procedure as a method of microencapsulating enzymes or other proteins within potentially biodegradable membranes. Preliminary in vitro degradation studies suggest that degradation of the microcapsules is inhibited by low levels of their breakdown products, thus allowing the storage of the microcapsules as aqueous suspensions for prolonged periods in sealed containers. (Auth.)

  6. Interventional Analgesic Management of Lung Cancer Pain.

    Science.gov (United States)

    Hochberg, Uri; Elgueta, Maria Francisca; Perez, Jordi

    2017-01-01

    Lung cancer is one of the four most prevalent cancers worldwide. Comprehensive patient care includes not only adherence to clinical guidelines to control and when possible cure the disease but also appropriate symptom control. Pain is one of the most prevalent symptoms in patients diagnosed with lung cancer; it can arise from local invasion of chest structures or metastatic disease invading bones, nerves, or other anatomical structures potentially painful. Pain can also be a consequence of therapeutic approaches like surgery, chemotherapy, or radiotherapy. Conventional medical management of cancer pain includes prescription of opioids and coadjuvants at doses sufficient to control the symptoms without causing severe drug effects. When an adequate pharmacological medical management fails to provide satisfactory analgesia or when it causes limiting side effects, interventional cancer pain techniques may be considered. Interventional pain management is devoted to the use of invasive techniques such as joint injections, nerve blocks and/or neurolysis, neuromodulation, and cement augmentation techniques to provide diagnosis and treatment of pain syndromes resistant to conventional medical management. Advantages of interventional approaches include better analgesic outcomes without experiencing drug-related side effects and potential for opioid reduction thus avoiding central side effects. This review will describe various pain syndromes frequently described in lung cancer patients and those interventional techniques potentially indicated for those cases.

  7. [A novel analgesics made from Cannabis].

    Science.gov (United States)

    Szendrei, Kálmán

    2004-01-20

    Bayer AG has recently announced that it acquired exclusive rights for the marketing of GW Pharmaceuticals' new medicine Sativex in Europe and in other regions. Sativex is a sublingual spray on Cannabis extract basis, and is equipped with an electronic tool to facilitate accurate dosing and to prevent misuses. It is standardized for the THC and CBD. The new analgesic is proposed for the treatment of muscle spasticity and pains accompanying multiple sclerosis and as an efficient analgetic for neurogenic pain not responding well to opioids and to other therapies available. The entirely new mechanism of action through the recently discovered cannabinoid receptor system may offer a real therapeutic potential to the drug. Although the Government of Netherlands has authorized the sale of pharmaceutical grade Cannabis herb by pharmacies in the Netherlands, the availability on the pharmaceutical market of the registered preparation may render requests for the authorization of the smoking of Cannabis herb (marihuana) by individuals suffering of multiple sclerosis, neurogenic pain, AIDS wasting syndrome unnecessary. Nevertheless, the "old chameleon" plant Cannabis appears to gradually regain its previous status in mainstream therapy and pharmacy. As long as the plant Cannabis and its products continue to be classified as narcotic drugs, medical use of the new preparation will need close supervision.

  8. Analgesic synergism of gabapentin and carbamazepine in rat model ...

    African Journals Online (AJOL)

    Analgesic synergism of gabapentin and carbamazepine in rat model of diabetic neuropathic pain. Sinan Mohammed Abdullah AL-Mahmood, Shahrin Tarmizi Bin Che Abdullah, Nik Nur Fatnoon Nik Ahmad, Abdul Hadi Bin Mohamed, Tariq Abdul Razak ...

  9. anti-inflammatory and analgesic activities: chemical constituents of ...

    African Journals Online (AJOL)

    a

    *Corresponding author. E-mail: bedisag@yahoo.fr. ANTI-INFLAMMATORY AND ANALGESIC ACTIVITIES: CHEMICAL CONSTITUENTS OF ESSENTIAL OILS OF OCIMUM GRATISSIMUM,. EUCALYPTUS CITRIODORA AND CYMBOPOGON GIGANTEUS INHIBITED. LIPOXYGENASE L-1 AND CYCLOOXYGENASE OF ...

  10. Phytochemical and analgesic evaluation of methanol leaf extract of ...

    African Journals Online (AJOL)

    Phytochemical and analgesic evaluation of methanol leaf extract of ... Thirty minutes prior to intraperitoneal injection with 2 ml of 0.1% acetic acid, animals in groups ... (acetaminophen), aspirin and indomethacin while VII received saline water.

  11. The analgesic effect of diclofenac sodium administered via the ...

    African Journals Online (AJOL)

    2016-02-08

    Feb 8, 2016 ... to food and water, feeding, temperature, environment, diurnal, and nocturnal .... to detect the potency of substances that have analgesic potential.[10,11] In this ... Figure 8: Leakage control with Hamilton's syringe. Figure 9: ...

  12. Phytochemical Screening and Evaluation of Analgesic Activity of Oroxylum indicum

    OpenAIRE

    Das, B. K.; Al-Amin, M. M.; Russel, S. M.; Kabir, S.; Bhattacherjee, R.; Hannan, J. M. A.

    2014-01-01

    We aimed to study phytochemical screening and analgesic activity of ethanol extract of Oroxylum indicum. The dried powder of the barks of the plant was extracted with 95% ethanol and was subjected to various phytochemical tests to ascertain the principle constituents contained in the extract. The result revealed the presence of alkaloids, flavonoids, tannins, glycosides in the ethanol extract of Oroxylum indicum. The extract was screened for analgesic activity by using hot plate, acetic acid-...

  13. Analgesic use - prevalence, biomonitoring and endocrine and reproductive effects

    DEFF Research Database (Denmark)

    Kristensen, David Møbjerg; Mazaud-Guittot, Sverine; Gaudriault, Pierre

    2016-01-01

    policies, habits, accessibility, disease patterns and the age distribution of each population. Biomonitoring indicates ubiquitous and high human exposure to paracetamol and to salicylic acid, which is the main metabolite of acetylsalicylic acid. Furthermore, evidence suggests that analgesics can have......Paracetamol and NSAIDs, in particular acetylsalicylic acid (aspirin) and ibuprofen, are among the most used and environmentally released pharmaceutical drugs. The differences in international trends in the sale and consumption of mild analgesics reflect differences in marketing, governmental...

  14. [Management of opioid maintenance treatments when analgesic treatments are required].

    Science.gov (United States)

    Laprevote, Vincent; Geoffroy, Pierre A; Rolland, Benjamin; Leheup, Benoît F; Di Patrizio, Paolo; Cottencin, Olivier; Schwan, Raymund

    2013-01-01

    Opioid maintenance treatments (OMT) reduce illicit opiate use and its associated risks. They are often prescribed on a long-term basis. Physiological changes induced by long-term OMT may cause hyperalgesia and cross-tolerance to opioid agonists, which suggests that the dosage of analgesic treatment should be modified in cases of acute pain, especially when an opioid-based analgesia is required. When treatment with analgesics is necessary, OMT must be maintained, except in exceptional cases. If a split-dosing schedule is temporarily employed during OMT, the daily dosage should not be increased for analgesic purposes. Analgesic treatment must be managed differently in case of treatment with buprenorphine or methadone. With buprenorphine, non-opioid analgesics should be introduced first, if possible. If this strategy is inefficient or contraindicated, a temporary or definitive switch to methadone should be considered. In the case of methadone-based OMT, opioid analgesics should be added directly and the dosage should be adapted according to the level of pain reported by the patient. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  15. An Efficient, Recyclable, and Stable Immobilized Biocatalyst Based on Bioinspired Microcapsules-in-Hydrogel Scaffolds.

    Science.gov (United States)

    Zhang, Shaohua; Jiang, Zhongyi; Shi, Jiafu; Wang, Xueyan; Han, Pingping; Qian, Weilun

    2016-09-28

    Design and preparation of high-performance immobilized biocatalysts with exquisite structures and elucidation of their profound structure-performance relationship are highly desired for green and sustainable biotransformation processes. Learning from nature has been recognized as a shortcut to achieve such an impressive goal. Loose connective tissue, which is composed of hierarchically organized cells by extracellular matrix (ECM) and is recognized as an efficient catalytic system to ensure the ordered proceeding of metabolism, may offer an ideal prototype for preparing immobilized biocatalysts with high catalytic activity, recyclability, and stability. Inspired by the hierarchical structure of loose connective tissue, we prepared an immobilized biocatalyst enabled by microcapsules-in-hydrogel (MCH) scaffolds via biomimetic mineralization in agarose hydrogel. In brief, the in situ synthesized hybrid microcapsules encapsulated with glucose oxidase (GOD) are hierarchically organized by the fibrous framework of agarose hydrogel, where the fibers are intercalated into the capsule wall. The as-prepared immobilized biocatalyst shows structure-dependent catalytic performance. The porous hydrogel permits free diffusion of glucose molecules (diffusion coefficient: ∼6 × 10(-6) cm(2) s(-1), close to that in water) and retains the enzyme activity as much as possible after immobilization (initial reaction rate: 1.5 × 10(-2) mM min(-1)). The monolithic macroscale of agarose hydrogel facilitates the easy recycling of the immobilized biocatalyst (only by using tweezers), which contributes to the nonactivity decline during the recycling test. The fiber-intercalating structure elevates the mechanical stability of the in situ synthesized hybrid microcapsules, which inhibits the leaching and enhances the stability of the encapsulated GOD, achieving immobilization efficiency of ∼95%. This study will, therefore, provide a generic method for the hierarchical organization of (bio

  16. pH-controlled Bacillus thuringiensis Cry1Ac protoxin loading and release from polyelectrolyte microcapsules.

    Directory of Open Access Journals (Sweden)

    Wenhui Yang

    Full Text Available Crystal proteins synthesized by Bacillus thuringiensis (Bt have been used as biopesticides because of their toxicity to the insect larval hosts. To protect the proteins from environmental stress to extend their activity, we have developed a new microcapsule formulation. Poly (acrylic acid (PAH and poly (styrene sulfonate (PSS were fabricated through layer-by-layer self-assembly based on a CaCO(3 core. Cry1Ac protoxins were loaded into microcapsules through layer-by-layer self-assembly at low pH, and the encapsulated product was stored in water at 4°C. Scanning electron microscopy (SEM was used to observe the morphology of the capsules. To confirm the successful encapsulation, the loading results were observed with a confocal laser scattering microscope (CLSM, using fluorescein-labeled Cry1Ac protoxin (FITC-Cry1Ac. The protoxins were released from the capsule under the alkaline condition corresponding to the midgut of certain insects, a condition which seldom exists elsewhere in the environment. The following bioassay experiment demonstrated that the microcapsules with Cry1Ac protoxins displayed approximately equivalent insecticidal activity to the Asian corn borer compared with free Cry1Ac protoxins, and empty capsules proved to have no effect on insects. Further result also indicated that the formulation could keep stable under the condition of heat and desiccation. These results suggest that this formulation provides a promising methodology that protects protoxins from the environment and releases them specifically in the target insects' midgut, which has shown potential as biopesticide in the field.

  17. Physicochemical properties and drug release behavior of biguanidino and O-carboxymethyl chitosan microcapsules.

    Science.gov (United States)

    Huo, Weiqiang; Zhang, Weixin; Wang, Wei; Zhou, Xiaohua

    2014-09-01

    Two types of microcapsules (MCs) were prepared by the emulsion cross-linking method, where biguanidino chitosan (BGCS)and O-carboxymethyl chitosan (O-CMCS) served as the wall materials, and the antibacterial agent 2,4-diamino-6-(2-pyridyl)-1,3,5-triazine (PyTNH) served as a model water-soluble drug. The physicochemical performance of the MCs and their drug release behavior were investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis/derivative thermogravimetric analysis, scanning electron microscopy, and swelling and in vitro drug release studies of the two MCs with unmodified chitosan-MCs (CS-MCs) used as the control. The results indicated that the degree of cross-linking, encapsulation efficiency, and thermal stability of the shell wall of the BGCS-microcapsules (BGCS-MCs) were much higher than those of the control and the O-CMCS-microcapsules (CMCS-MCs), owing to the reduction of steric hindrance and development of the conjugation effect in the cross-linking process. Studies on the swelling and in vitro drug-release behavior revealed a sustained release effect of the BGCS-MCs. Moreover, the CMCS-MCs were found to exhibit a pH-dependent drug release behavior, which can be attributed to the successive formation of H-bonds and repulsive forces with the change in the pH of the medium. Based on these results, the swelling-release models and the drug release kinetics of BGCS-MCs and CMCS-MCs are proposed. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Smart polyelectrolyte microcapsules as carriers for water-soluble small molecular drug.

    Science.gov (United States)

    Song, Weixing; He, Qiang; Möhwald, Helmuth; Yang, Yang; Li, Junbai

    2009-10-15

    Heat treatment is introduced as a simple method for the encapsulation of low molecular weight water-soluble drugs within layer-by-layer assembled microcapsules. A water-soluble drug, procainamide hydrochloride, could thus be encapsulated in large amount and enriched by more than 2 orders of magnitude in the assembled PDADMAC/PSS capsules. The shrunk capsules could control the unloading rate of drugs, and the drugs could be easily unloaded using ultrasonic treatment. The encapsulated amount could be quantitatively controlled via the drug concentration in the bulk. We also found that smaller capsules possess higher encapsulation capability.

  19. Bioinspired Layer-by-Layer Microcapsules Based on Cellulose Nanofibers with Switchable Permeability

    DEFF Research Database (Denmark)

    Paulraj, Thomas; Riazanova, Anastasia V; Yao, Kun

    2017-01-01

    Green, all-polysaccharide based microcapsules with mechanically robust capsule walls and fast, stimuli-triggered, and switchable permeability behavior show great promise in applications based on selective and timed permeability. Taking a cue from nature, the build-up and composition of plant......-by-layer technique on sacrificial CaCO3 templates, using plant polysaccharides (pectin, cellulose nanofibers, and xyloglucan) only. In water, the capsule wall was permeable to labeled dextrans with a hydrodynamic diameter of ∼6.6 nm. Upon exposure to NaCl, the porosity of the capsule wall quickly changed allowing...

  20. PRODUCTION OF ESSENTIAL ORANGE OIL MICROCAPSULES: COMPARISON OF THE USE OF SURFACTANTS CETILTRIMETILAMONOUS BROMIDE AND POLYSORBATE 20 BY ELECTRONIC SCAN MICROSCOPY

    Directory of Open Access Journals (Sweden)

    ROSSI SOARES Wagner

    2017-05-01

    Full Text Available Commercial applications of microcapsules began to appear in the textile industry in the late 1990s increasing investments in research to develop functional tissues, with a special focus on value aggregation, coating them with various active substances for the development of innovative products and according to fashion. Microcapsules have been presented as an alternative with regard to the encapsulation of essential oils since it is one of the most effective methods to achieve the goal of controlled release. The orange essential oil has biocidal properties and has been used microencapsulated as an ecological botanical insecticide. The characteristics of microcapsules containing aromatic oils, such as morphology and particle size distribution, depend on the preparation conditions such as the type of emulsifier used and the viscosity of the core material. Thus, for the microcapsules to be effectively used for the development of innovative products in the textile industry, studies on their formulation and characterization are necessary. This article proposes to compare the use of cetyltrimethylammonium bromide and polysorbate surfactants by means of their morphology, by scanning electron microscopy analysis on the formulation of microcapsules whit melamine formaldehyde shell with core of orange essential oil (citrus sinensis combined with a non-volatile oil Medium Chain Triglycerides produced by interfacial polymerization method. At the end, the microcapsules were analyzed by microcoscopies and the differences in microcapsule morphologies were observed according to the kind of surfactant used.

  1. Multicompartmental, multilayered probucol microcapsules for diabetes mellitus: Formulation characterization and effects on production of insulin and inflammation in a pancreatic β-cell line.

    Science.gov (United States)

    Mooranian, Armin; Negrulj, Rebecca; Arfuso, Frank; Al-Salami, Hani

    2016-11-01

    We have shown that the primary bile acid, cholic acid (CA), has anti-diabetic effects in vivo. Probucol (PB) is a lipophilic drug with potential applications in type 2 diabetes (T2D). This study aimed to encapsulate CA with PB and examine the formulation and surface characteristics of the microcapsules. We also tested the microcapsules' biological effects on pancreatic β-cells. Using the polymer, sodium alginate (SA), two formulations were prepared: PB-SA (control), and PB-CA-SA (test). Complete characterizations of the morphology, shape, size, chemical, thermal, and rheological properties, swelling and mechanical strength, cross-sectional imaging (Micro CT), stability, Zeta-potential, drug contents, and PB release profile were carried out, at different temperature and pH values. The microcapsules were applied to a NIT-1 cell culture and the supernatant was analyzed for insulin and TNF-α concentrations. CA incorporation optimized the PB microcapsules, which exhibited pseudoplastic-thixotropic rheological characteristics. The size of the microcapsules remained similar after CA addition, and the microcapsules showed even drug distribution and no chemical alterations of the excipients. Micro-CT imaging, differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy showed consistent microcapsules with uniform shape and morphology. PB-CA-SA microcapsules enhanced NIT-1 cell viability under hyperglycemic states and resulted in improved insulin release as well as reduced cytokine production at the physiological glucose levels. The addition of the primary bile acid, CA, improved the physical properties of the microcapsules and enhanced their pharmacological activity in vitro, suggesting potential applications in diabetes treatment.

  2. Microcapsules with a pH responsive polymer: Influence of the encapsulated oil on the capsule morphology

    NARCIS (Netherlands)

    Wagdare, N.A.; Marcelis, A.T.M.; Boom, R.M.; Rijn, van C.J.M.

    2011-01-01

    Microcapsules were prepared by microsieve membrane cross flow emulsification of Eudragit FS 30D/dichloromethane/edible oil mixtures in water, and subsequent phase separation induced by extraction of the dichloromethane through an aqueous phase. For long-chain triglycerides and jojoba oil, core–shell

  3. Synthesis and characterization of new biopolymeric microcapsules containing DEHPA-TOPO extractants for separation of uranium from phosphoric acid solutions.

    Science.gov (United States)

    Outokesh, Mohammad; Tayyebi, Ahmad; Khanchi, Alireza; Grayeli, Fatemeh; Bagheri, Ghodrat

    2011-01-01

    A novel microcapsule adsorbent for separation of uranium from phosphoric acid solutions was developed by immobilizing the di(2-ethylhexyl) phosphoric acid-trioctyl phosphine oxide extractants in the polymeric matrix of calcium alginate. Physical characterization of the microcapsules was accomplished by scanning electron microscopy and thermogravimetric techniques. Equilibrium experiments revealed that both ion exchange and solvent extraction mechanisms were involved in the adsorption of [Formula: see text] ions, but the latter prevailed in a wider range of acid concentration. According to the results of kinetics study, at low acidity level, the rate controlling step was slow chemical reaction of [Formula: see text] ions with the microdroplets of extractant, whereas it changed to intraparticle diffusion at higher acid concentration. The study also attempted identification of the diffusion paths of the ions within the microcapsules, and the mechanism of change of mass transfer rate during the uptake process. The prepared microcapsules preserved their entire capacity after three cycles of adsorption, and their breakthrough behaviour was well fitted by a new formula derived from shrinking core model.

  4. Barium-cross-linked alginate-gelatine microcapsule as a potential platform for stem cell production and modular tissue formation.

    Science.gov (United States)

    Alizadeh Sardroud, Hamed; Nemati, Sorour; Baradar Khoshfetrat, Ali; Nabavinia, Mahbobeh; Beygi Khosrowshahi, Younes

    2017-08-01

    Influence of gelatine concentration and cross-linker ions of Ca 2+ and Ba 2+ was evaluated on characteristics of alginate hydrogels and proliferation behaviours of model adherent and suspendable stem cells of fibroblast and U937 embedded in alginate microcapsules. Increasing gelatine concentration to 2.5% increased extent of swelling to 15% and 25% for barium- and calcium-cross-linked hydrogels, respectively. Mechanical properties also decreased with increasing swelling of hydrogels. Both by increasing gelatine concentration and using barium ions increased considerably the proliferation of encapsulated model stem cells. Barium-cross-linked alginate-gelatine microcapsule tested for bone building block showed a 13.5 ± 1.5-fold expansion for osteoblast cells after 21 days with deposition of bone matrix. The haematopoietic stem cells cultured in the microcapsule after 7 days also showed up to 2-fold increase without adding any growth factor. The study demonstrates that barium-cross-linked alginate-gelatine microcapsule has potential for use as a simple and efficient 3D platform for stem cell production and modular tissue formation.

  5. Near-Infrared Resonance Energy Transfer Glucose Biosensors in Hybrid Microcapsule Carriers

    Directory of Open Access Journals (Sweden)

    Mike McShane

    2008-09-01

    Full Text Available Fluorescence-based sensing systems offer potential for noninvasive monitoring with implantable devices, but require carrier technologies that provide suitable immobilization, accessibility, and biocompatibility. Recent developments towards this goal include a competitive binding assay for glucose that has been encapsulated in semipermeable microcapsule carriers. This paper describes an extension of this work to increase the applicability to in vivo monitoring, wherein two significant developments are described: (1 a near-infrared resonance energy transfer system for transducing glucose concentration, and (2 novel hybrid organic-inorganic crosslinked microcapsules as carriers. The quenching-based assay is a competitive binding (CB system based on apo-glucose oxidase (AG as the receptor and dextran as the competitive ligand. The encapsulated quencher-labeled dextran and near infrared donor-labeled glucose receptor showed a stable and reversible response with tunable sensitivity of 1–5%/mM over the physiological range, making these transducers attractive for continuous monitoring for biomedical applications.

  6. Preparation, physical characterization, and stability of Ferrous-Chitosan microcapsules using different iron sources

    Science.gov (United States)

    Handayani, Noer Abyor; Luthfansyah, M.; Krisanti, Elsa; Kartohardjono, Sutrasno; Mulia, Kamarza

    2017-11-01

    Dietary modification, supplementation and food fortification are common strategies to alleviate iron deficiencies. Fortification of food is an effective long-term approach to improve iron status of populations. Fortification by adding iron directly to food will cause sensory problems and decrease its bioavailability. The purpose of iron encapsulation is: (1) to improve iron bioavailability, by preventing oxidation and contact with inhibitors and competitors; and (2) to disguise the rancid aroma and flavor of iron. A microcapsule formulation of two suitable iron compounds (iron II fumarate and iron II gluconate) using chitosan as a biodegradable polymer will be very important. Freeze dryer was also used for completing the iron microencapsulation process. The main objective of the present study was to prepare and characterize the iron-chitosan microcapsules. Physical characterization, i.e. encapsulation efficiency, iron loading capacity, and SEM, were also discussed in this paper. The stability of microencapsulated iron under simulated gastrointestinal conditions was also investigated, as well. Both iron sources were highly encapsulated, ranging from 71.5% to 98.5%. Furthermore, the highest ferrous fumarate and ferrous gluconate loaded were 1.9% and 4.8%, respectively. About 1.04% to 9.17% and 45.17% to 75.19% of Fe II and total Fe, were released in simulated gastric fluid for two hours and in simulated intestinal fluid for six hours, respectively.

  7. Enhanced thermal properties with graphene oxide in the urea-formaldehyde microcapsules containing paraffin PCMs.

    Science.gov (United States)

    Qiao, Zhen; Mao, Jian

    2017-02-01

    In this study, compact urea-formaldehyde microcapsules containing paraffin (UFP) phase change materials (PCMs) were prepared via in situ polymerisation. The thermal conductivity of the PCMs was enhanced without influencing their enthalpy by adding graphene oxide (GO). Two modification methods were investigated: One in which GO is added to the inside of microcapsules, defined as "paraffin/GO@UF composite"; and another in which GO is coated onto the surface of shell, defined as "paraffin@UF/GO composite". The GO sheets were visible in scanning electron microscope (SEM) images of paraffin@UF/GO composite. The thermal conductivity was 0.2236 ± 0.0003 W/(m·K) for UFP particles, was 0.2517 ± 0.0003 W/(m·K) for the paraffin/GO@UF composite (10 wt%), and was 1.0670 ± 0.0020 W/(m·K) for paraffin@UF/GO composite (10 wt%), respectively. The encapsulation efficiency of all samples exceeded 80% (w/w) and all samples exhibited favourable thermal stability and reliability. The IR emissivity of paraffin@UF/GO was lower than that of paraffin/GO@UF when the same GO amount was added to the composite.

  8. Nanoparticle assembled microcapsules for application as pH and ammonia sensor.

    Science.gov (United States)

    Amali, Arlin Jose; Awwad, Nour H; Rana, Rohit Kumar; Patra, Digambara

    2011-12-05

    The encapsulation of molecular probes in a suitable nanostructured matrix can be exploited to alter their optical properties and robustness for fabricating efficient chemical sensors. Despite high sensitivity, simplicity, selectivity and cost effectiveness, the photo-destruction and photo-bleaching are the serious concerns while utilizing molecular probes. Herein we demonstrate that hydroxy pyrene trisulfonate (HPTS), a pH sensitive molecular probe, when encapsulated in a microcapsule structure prepared via the assembly of silica nanoparticles mediated by poly-L-lysine and trisodium citrate, provides a robust sensing material for pH sensing under the physiological conditions. The temporal evolution under continuous irradiation indicates that the fluorophore inside the silica microcapsule is extraordinarily photostable. The fluorescence intensity alternation at dual excitation facilitates for a ratiometic sensing of the pH, however, the fluorescence lifetime is insensitive to hydrogen ion concentration. The sensing scheme is found to be robust, fast and simple for the measurement of pH in the range 5.8-8.0, and can be successfully applied for the determination of ammonia in the concentration range 0-1.2 mM, which is important for aquatic life and the environment. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Encapsulation of methotrexate loaded magnetic microcapsules for magnetic drug targeting and controlled drug release

    Energy Technology Data Exchange (ETDEWEB)

    Chakkarapani, Prabu [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Subbiah, Latha, E-mail: lathasuba2010@gmail.com [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Palanisamy, Selvamani; Bibiana, Arputha [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Ahrentorp, Fredrik; Jonasson, Christian; Johansson, Christer [Acreo Swedish ICT AB, Arvid Hedvalls backe 4, SE-411 33 Göteborg (Sweden)

    2015-04-15

    We report on the development and evaluation of methotrexate magnetic microcapsules (MMC) for targeted rheumatoid arthritis therapy. Methotrexate was loaded into CaCO{sub 3}-PSS (poly (sodium 4-styrenesulfonate)) doped microparticles that were coated successively with poly (allylamine hydrochloride) and poly (sodium 4-styrenesulfonate) by layer-by-layer technique. Ferrofluid was incorporated between the polyelectrolyte layers. CaCO{sub 3}-PSS core was etched by incubation with EDTA yielding spherical MMC. The MMC were evaluated for various physicochemical, pharmaceutical parameters and magnetic properties. Surface morphology, crystallinity, particle size, zeta potential, encapsulation efficiency, loading capacity, drug release pattern, release kinetics and AC susceptibility studies revealed spherical particles of ~3 µm size were obtained with a net zeta potential of +24.5 mV, 56% encapsulation and 18.6% drug loading capacity, 96% of cumulative drug release obeyed Hixson-Crowell model release kinetics. Drug excipient interaction, surface area, thermal and storage stability studies for the prepared MMC was also evaluated. The developed MMC offer a promising mode of targeted and sustained release drug delivery for rheumatoid arthritis therapy. - Highlights: • Development of methotrexate magnetic microcapsules (MMC) by layer-by-layer method. • Characterization of physicochemical, pharmaceutical and magnetic properties of MMC. • Multiple layers of alternative polyelectrolytes prolongs methotrexate release time. • MMC is capable for targeted and sustained release rheumatoid arthritis therapy.

  10. Low-magnetization magnetic microcapsules: A synergistic theranostic platform for remote cancer cells therapy and imaging

    KAUST Repository

    Zhang, Wei

    2014-04-02

    Multifunctional magnetic microcapsules (MMCs) for the combined cancer cells hyperthermia and chemotherapy in addition to MR imaging are successfully developed. A classical layer-by-layer technique of oppositely charged polyelectrolytes (poly(allylamine hydrochloride) (PAH) and poly(4-styrene sulfonate sodium) (PSS)) is used as it affords great controllability over the preparation together with enhanced loading of the chemotherapeutic drug (doxorubicin, DOX) in the microcapsules. Superparamagnetic iron oxide (SPIOs) nanoparticles are layered in the system to afford MMC1 (one SPIOs layer) and MMC2 (two SPIOs layers). Most interestingly, MMC1 and MMC2 show efficient hyperthermia cell death and controlled DOX release although their magnetic saturation value falls below 2.5 emu g-1, which is lower than the 7-22 emu g-1 reported to be the minimum value needed for biomedical applications. Moreover, MMCs are pH responsive where a pH 5.5 (often reported for cancer cells) combined with hyperthermia increases DOX release predictably. Both systems prove viable when used as T2 contrast agents for MR imaging in HeLa cells with high biocompatibility. Thus, MMCs hold a great promise to be used commercially as a theranostic platform as they are controllably prepared, reproducibly enhanced, and serve as drug delivery, hyperthermia, and MRI contrast agents at the same time.

  11. Synthesis, characterization and thermal properties of paraffin microcapsules modified with nano-Al2O3

    International Nuclear Information System (INIS)

    Jiang, Xiang; Luo, Ruilian; Peng, Feifei; Fang, Yutang; Akiyama, Tomohiro; Wang, Shuangfeng

    2015-01-01

    Highlights: • Novel MEPCM modified with nano-Al 2 O 3 was prepared via emulsion polymerization. • The paraffin microcapsules presented a well-defined microstructure. • The composite achieved high encapsulation efficiency. • The thermal conductivity of MEPCM was enhanced due to the nano-Al 2 O 3 particles. - Abstract: A sort of new microencapsulated phase change materials (MEPCM) based on paraffin wax core and poly(methyl methacrylate-co-methyl acrylate) shell with nano alumina (nano-Al 2 O 3 ) inlay was synthesized through emulsion polymerization. Various techniques were used to characterize the as-prepared products so as to investigate the effect of nano-Al 2 O 3 on morphology and thermal performance, including scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and thermal conductivity measurement. The results showed that the products achieved the best performance with 16% (monomer mass) nano-Al 2 O 3 added under the optimal preparation conditions. The DSC results indicated that the phase change temperature of the composite exhibited appropriate phase change temperature and achieved high encapsulation efficiency. The thermal conductivity of the paraffin microcapsules is also significantly improved owing to the presence of high thermal conductive nano-Al 2 O 3 . This synthetic technique can be a perspective way to prepare the MEPCM with enhanced thermal transfer and phase change properties for potential applications to energy-saving building materials

  12. Preparation and characterization of microcapsules of Pterodon pubescens Benth. by using natural polymers

    Directory of Open Access Journals (Sweden)

    Alexandre Espada Reinas

    2014-12-01

    Full Text Available An oleaginous fraction obtained from an alcohol extract of the fruit of Pterodon pubescensBenth. (FHPp was microencapsulated in polymeric systems. These systems were developed using a complex coacervation method and consisted of alginate/medium-molecular-weight chitosan (F1-MC, alginate/chitosan with greater than 75% deacetylation (F2-MC, and alginate/low-molecular-weight chitosan (F3-MC. These developed systems have the potential to both mask the taste of the extract, and to protect its constituents against possible chemical degradation. The influence of the formulation parameters and process were determined by chemical profiling and measurement of the microencapsulation efficiency of the oleaginous fraction, and by assessment of microcapsule morphology. The obtained formulations were slightly yellow, odorless, and had a pleasant taste. The average diameters of the microcapsules were 0.4679 µm (F2-MC, 0.5885 µm (F3-MC, and 0.9033 µm (F1-MC. The best formulation was F3-MC, with FHPp microencapsulation efficiency of 61.01 ± 2.00% and an in vitro release profile of 75.88 ± 0.45%; the content of vouacapans 3-4 was 99.49 ± 2.80%. The best model to describe the release kinetics for F1-MC and F3-MC was that proposed by Higuchi; however, F2-MC release displayed first-order kinetics; the release mechanism was of the supercase II type for all formulations.

  13. Effect of whey protein agglomeration on spray dried microcapsules containing Saccharomyces boulardii.

    Science.gov (United States)

    Duongthingoc, Diep; George, Paul; Katopo, Lita; Gorczyca, Elizabeth; Kasapis, Stefan

    2013-12-01

    This work investigates the effect of whey protein agglomeration on the survivability of Saccharomyces boulardii within spray dried microcapsules. It attempts to go beyond phenomenological observations by establishing a relationship between physicochemical characteristics of the polymeric matrix and its effect on probiotic endurance upon spray drying. It is well known that this type of thermal shock has lethal consequences on the yeast cells. To avoid such undesirable outcome, we take advantage of the early agglomeration phenomenon observed for whey protein by adjusting the pH value of preparations close to isoelectric point (pH 4-5). During the subsequent process of spray drying, development of whey protein agglomerates induces formation of an early crust, and the protein in this molten globular state creates a cohesive network encapsulating the yeast cells. It appears that the early crust formation at a given sample pH and temperature regime during spray drying benefits the survivability of S. boulardii within microcapsules. Copyright © 2013. Published by Elsevier Ltd.

  14. Intracranial microcapsule chemotherapy delivery for the localized treatment of rodent metastatic breast adenocarcinoma in the brain.

    Science.gov (United States)

    Upadhyay, Urvashi M; Tyler, Betty; Patta, Yoda; Wicks, Robert; Spencer, Kevin; Scott, Alexander; Masi, Byron; Hwang, Lee; Grossman, Rachel; Cima, Michael; Brem, Henry; Langer, Robert

    2014-11-11

    Metastases represent the most common brain tumors in adults. Surgical resection alone results in 45% recurrence and is usually accompanied by radiation and chemotherapy. Adequate chemotherapy delivery to the CNS is hindered by the blood-brain barrier. Efforts at delivering chemotherapy locally to gliomas have shown modest increases in survival, likely limited by the infiltrative nature of the tumor. Temozolomide (TMZ) is first-line treatment for gliomas and recurrent brain metastases. Doxorubicin (DOX) is used in treating many types of breast cancer, although its use is limited by severe cardiac toxicity. Intracranially implanted DOX and TMZ microcapsules are compared with systemic administration of the same treatments in a rodent model of breast adenocarcinoma brain metastases. Outcomes were animal survival, quantified drug exposure, and distribution of cleaved caspase 3. Intracranial delivery of TMZ and systemic DOX administration prolong survival more than intracranial DOX or systemic TMZ. Intracranial TMZ generates the more robust induction of apoptotic pathways. We postulate that these differences may be explained by distribution profiles of each drug when administered intracranially: TMZ displays a broader distribution profile than DOX. These microcapsule devices provide a safe, reliable vehicle for intracranial chemotherapy delivery and have the capacity to be efficacious and superior to systemic delivery of chemotherapy. Future work should include strategies to improve the distribution profile. These findings also have broader implications in localized drug delivery to all tissue, because the efficacy of a drug will always be limited by its ability to diffuse into surrounding tissue past its delivery source.

  15. Preparation and Characterization of Inorganic PCM Microcapsules by Fluidized Bed Method

    Directory of Open Access Journals (Sweden)

    Svetlana Ushak

    2016-01-01

    Full Text Available The literature shows that inorganic phase change materials (PCM have been very seldom microencapsulated, so this study aims to contribute to filling this research gap. Bischofite, a by-product from the non-metallic industry identified as having good potential to be used as inorganic PCM, was microencapsulated by means of a fluidized bed method with acrylic as polymer and chloroform as solvent, after compatibility studies of both several solvents and several polymers. The formation of bischofite and pure MgCl2·6H2O microcapsules was investigated and analyzed. Results showed an efficiency in microencapsulation of 95% could be achieved when using 2 min of fluidization time and 2 kg/h of atomization flow. The final microcapsules had excellent melting temperatures and enthalpy compared to the original PCM, 104.6 °C and 95 J/g for bischofite, and 95.3 and 118.3 for MgCl2·6H2O.

  16. Insights in Behavior of Variably Formulated Alginate-Based Microcapsules for Cell Transplantation

    Directory of Open Access Journals (Sweden)

    Pia Montanucci

    2015-01-01

    Full Text Available Alginate-based microencapsulation of live cells may offer the opportunity to treat chronic and degenerative disorders. So far, a thorough assessment of physical-chemical behavior of alginate-based microbeads remains cloudy. A disputed issue is which divalent cation to choose for a high performing alginate gelling process. Having selected, in our system, high mannuronic (M enriched alginates, we studied different gelling cations and their combinations to determine their eventual influence on physical-chemical properties of the final microcapsules preparation, in vitro and in vivo. We have shown that used of ultrapure alginate allows for high biocompatibility of the formed microcapsules, regardless of gelation agents, while use of different gelling cations is associated with corresponding variable effects on the capsules’ basic architecture, as originally reported in this work. However, only the final application which the capsules are destined to will ultimately guide the selection of the ideal, specific gelling divalent cations, since in principle there are no capsules that are better than others.

  17. Phytochemical Screening and Evaluation of Analgesic Activity of Oroxylum indicum.

    Science.gov (United States)

    Das, B K; Al-Amin, M M; Russel, S M; Kabir, S; Bhattacherjee, R; Hannan, J M A

    2014-01-01

    We aimed to study phytochemical screening and analgesic activity of ethanol extract of Oroxylum indicum. The dried powder of the barks of the plant was extracted with 95% ethanol and was subjected to various phytochemical tests to ascertain the principle constituents contained in the extract. The result revealed the presence of alkaloids, flavonoids, tannins, glycosides in the ethanol extract of Oroxylum indicum. The extract was screened for analgesic activity by using hot plate, acetic acid-induced writhing and formalin test. The ethanol extract of the plant at two different doses (250 and 500 mg/kg) showed significant (Panalgesic effect in all test methods (hot plate, acetic acid-induced writhing and formalin). The analgesic activity was compared with a standard drug (ketorolac at 10 mg/kg). Based on the present findings and previous literature review it can be concluded that flavonoids and tannins might be responsible for the analgesic activity. We suggest that ethanol extract of Oroxylum indicum might have potential chemical constituents that could be used in the future for the development of novel analgesic agent.

  18. Analgesic and Anti-Inflammatory Activity of Pinus roxburghii Sarg.

    Directory of Open Access Journals (Sweden)

    Dhirender Kaushik

    2012-01-01

    Full Text Available The Chir Pine, Pinus roxburghii, named after William Roxburgh, is a pine native to the Himalaya. Pinus roxburghii Sarg. (Pinaceae is traditionally used for several medicinal purposes in India. As the oil of the plant is extensively used in number of herbal preparation for curing inflammatory disorders, the present study was undertaken to assess analgesic and anti-inflammatory activities of its bark extract. Dried and crushed leaves of Pinus roxburghii Sarg. were defatted with petroleum ether and then extracted with alcohol. The alcoholic extract at the doses of 100 mg/kg, 300 mg/kg, and 500 mg/kg body weight was subjected to evaluation of analgesic and anti-inflammatory activities in experimental animal models. Analgesic activity was evaluated by acetic acid-induced writhing and tail immersion tests in Swiss albino mice; acute and chronic anti-inflammatory activity was evaluated by carrageenan-induced paw oedema and cotton pellet granuloma in Wistar albino rats. Diclofenac sodium and indomethacin were employed as reference drugs for analgesic and anti-inflammatory studies, respectively. In the present study, the alcoholic bark extract of Pinus roxburghii Sarg. demonstrated significant analgesic and anti-inflammatory activities in the tested models.

  19. Role of serotonin in pathogenesis of analgesic induced headache

    Energy Technology Data Exchange (ETDEWEB)

    Srikiatkhachorn, A.

    1999-12-16

    Analgesic abuse has recently been recognized as a cause of deterioration in primary headache patients. Although the pathogenesis of this headache transformation is still obscure, and alteration of central pain control system is one possible mechanism. A number of recent studies indicated that simple analgesics exert their effect by modulating the endogenous pain control system rather than the effect at the peripheral tissue, as previously suggested. Serotonin (5-hydroxytryptamine ; 5-HT) has long been known to play a pivotal role in the pain modulatory system in the brainstem. In the present study, we investigated the changes in 5-HT system in platelets and brain tissue. A significant decrease in platelet 5-HT concentration (221.8{+-}30.7, 445.3{+-}37.4 and 467.2{+-}38.5 ng/10{sup 9} platelets, for patients with analgesic-induced headache and migraine patients, respectively, p<0.02) were evident in patients with analgesic induced headache. Chronic paracetamol administration induced a decrease in 5-HT{sub 2} serotonin receptor in cortical and brain stem tissue in experimental animals (B{sub max}=0.93{+-}0.04 and 1.79{+-}0.61 pmol/mg protein for paracetamol treated rat and controls, respectively, p<0.05). Our preliminary results suggested that chronic administration of analgesics interferes with central and peripheral 5-HT system and therefore possibly alters the 5-HT dependent antinociceptive system. (author)

  20. Preparation and Comparative Characterization of Alginate-Made Microcapsules and Microspheres Containing Tomato, Seabuckthorn Juices and Pumpkin Oil

    Directory of Open Access Journals (Sweden)

    Florina Csernatoni

    2015-05-01

    Full Text Available Recent studies have shown the benefits of tomatoes, seabuckthorn juices and pumpkin oil, rich in bioactives with antioxidant capacity, in the prevention of prostate diseases. To stabilize their antioxidant activity, microencapsulation represent a good technological alternative, improving the stability and bioavailability of bioactive molecules ( phenolic derivatives, carotenoids, phytosterols, vitamins.   The aim of the study was to prepare and characterize microspheres and microcapsules based on emulsions made of natural polymers like Natrium alginate mixed with tomato and/or seabuckthorn juices, with or without pumpkin oil.  The viscosity of emulsions, the morphology of microcapsules and microspheres were characterized comparatively and the bioactives were monitored by UV-Vis spectrometry.  In the lipophilic extract there were identified, before and after encapsulation, different classes of compounds, from lipids, to phenolic acid derivatives, flavonoids and carotenoids. Carotenoids were the major components having concentrations from 9.16 up to 19.71 mg/100 g sample. The viscosity of  each emulsion including juices, oil and natrium alginate 2%, before encapsulation, showed differences, dependent on the oil addition and speed of homogenization. The macroscopic and microscopic structure of microspheres and microcapsules were comparatively evaluated. Both microspheres and microcapsules had external diameters  ranging from 750 to 900 μm and the microcapsules’ oily core of 150-180 μm. The results obtained from emulsion’s viscosity will be correlated with the rigidity and optimal release rate of bioactive molecules from microcapsules and microspheres.  Further studies are directed towards these aspects.

  1. [Pain patients in street traffic. Do analgesics impair driving safety?].

    Science.gov (United States)

    Sohn, W

    2003-06-05

    Analgesics--in particular when self-prescribed or taken over the long term--may have a negative effect on safety on the road. This applies not only to vehicle drivers, but also to cyclists and pedestrians. Psychotropic effects of analgesics of all three WHO categories play a major causal role. Impairments may take the form of sleepiness, impaired vision, giddiness, loss of muscular tone or cardiovascular reactions. On the other hand, untreated severe pain has a high risk potential, since it may reduce both cognitive and psychomotoric performance. During the stabilization phase or dose adjustment of opioids, the patient must cautioned not to drive, and particular care must be taken in patients on concomitant or long-term medication or drinking excessive alcohol. In the last resort, the prescription of an analgesic is an individual decision involving both physician and patient.

  2. A short history of anti-rheumatic therapy - V. Analgesics

    Directory of Open Access Journals (Sweden)

    P. Marson

    2011-06-01

    Full Text Available The pharmacological treatment of pain has very ancient origins, when plant-derived products were used, including mandrake extracts and opium, a dried latex obtained from Papaver somniferum. In the XVI and XVII centuries opium came into the preparation of two compounds widely used for pain relief: laudanum and Dover’s powder. The analgesic properties of extracts of willow bark were then recognized and later, in the second half of the XIX century, experimental studies on chemically synthesized analgesics were planned, thus promoting the marketing of some derivatives of para-amino-phenol and pyrazole, the predecessors of paracetamol and metamizol. In the XX century, nonsteroidal anti-inflammatory drugs were synthesized, such as phenylbutazone, which was initially considered primarily a pain medication. The introduction on the market of centrally acting analgesics, such as tramadol, sometimes used in the treatment of rheumatic pain. is quite recent.

  3. Association between prenatal exposure to analgesics and risk of schizophrenia

    DEFF Research Database (Denmark)

    Sørensen, Holger J; Mortensen, Erik L; Reinisch, June M

    2004-01-01

    infections, concomitant drug treatment during pregnancy, an index of pregnancy complications, parental social status and parental age. RESULTS: In a risk set of 7999 individuals, 116 cases of schizophrenia were found (1.5%). Prenatal exposure to analgesics in the second trimester was associated......BACKGROUND: Disturbances in the central nervous system originating during foetal life may increase the risk of schizophrenia. AIMS: To illuminate the hypothesis that prenatal exposure to analgesics may affect foetal neurodevelopment, leading to increased risk of schizophrenia in adulthood. METHOD......: Using data from the Copenhagen Perinatal Cohort and from the Danish Psychiatric Central Register, we studied the relationship between prenatal exposure to analgesics and the risk of schizophrenia. The effect of prenatal exposure was adjusted for parental history of schizophrenia, second-trimester viral...

  4. Analgesic effect of the aqueous and ethanolic extracts of clove

    Directory of Open Access Journals (Sweden)

    Mina Kamkar Asl

    2013-04-01

    Full Text Available Objective: The beneficial effects of clove on toothache have been well documented. We have also previously shown the analgesic effects of clove essential oil. The present work was done to investigate the analgesic effects of the aqueous extract of clove using hot plate test. The possible role of opioid receptors in the analgesic effects of clove was also investigated using naloxone. Materials and Methods: Ninety male mice were divided into nine groups: (1 Saline, (2-4 Aaqueous (Aq 50, Aq 100, and Aq 200 groups which were treated with 50, 100, and 200 mg/kg of aqueous extract of clove, respectively, (5-7 Ethanolic (Eth 50, Eth 100, and Eth 200 groups which were treated with 50, 100, and 200 mg/kg of ethanolic extract of clove, respectively, and (8-9 Aq 100- Naloxone and Aq 200- Naloxone which were pretreated with 4 mg/kg of naloxone before injection of 100 or 200 mg/kg of the aqueous extract. The hot plate test was performed as a base record 10 min before injection of drugs and consequently repeated every 10 minutes after the injection. Results: The maximal percent effect (MPE in the animal groups treated with 50, 100, and 200 mg/kg of aqueous extract was significantly higher than the control group. Pretreatment with naloxone reduced the analgesic effects of both 100 and 200 mg/kg of the aqueous extract. Administration of all three doses of the ethanloic extract also non-significantly increased the MPE. Conclusion: The results of the present study showed that aqueous extract of clove has analgesic effect in mice demonstrated by hot plate test which is reversible by naloxone. The role of opioid system in the analgesic effect of clove might be suggested. However, more investigations are needed to elucidate the exact mechanism(s.

  5. Hybrid Iron Oxide-Graphene Oxide-Polysaccharides Microcapsule: A Micro-Matryoshka for On-demand Drug Release and Antitumor Therapy In Vivo

    KAUST Repository

    Deng, Lin; Li, Qiujin; Al-Rehili, Safa'a; Omar, Haneen; Almalik, Abdulaziz; Alshamsan, Aws; Zhang, Jianfei; Khashab, Niveen M.

    2016-01-01

    microcapsule (h-MC) by a simple layer-by-layer technique comprising polysaccharides (Alg, Chi, HA), iron oxide, and graphene oxide. Electrostatic assembly of the oppositely charged polysaccharides and graphene sheets provided a robust structure to load drugs

  6. The analgesic effects of exogenous melatonin in humans.

    Science.gov (United States)

    Andersen, Lars Peter Holst

    2016-10-01

    The hormone, melatonin is produced with circadian rhythm by the pineal gland in humans. The melatonin rhythm provides an endogenous synchronizer, modulating e.g. blood pressure, body temperature, cortisol rhythm, sleep-awake-cycle, immune function and anti-oxidative defence. Interestingly, a number of experimental animal studies demonstrate significant dose-dependent anti-nociceptive effects of exogenous melatonin. Similarly, recent experimental- and clinical studies in humans indicate significant analgesic effects. In study I, we systematically reviewed all randomized studies investigating clinical effects of perioperative melatonin. Meta-analyses demonstrated significant analgesic and anxiolytic effects of melatonin in surgical patients, equating reductions of 20 mm and 19 mm, respectively on a VAS, compared with placebo. Profound heterogeneity between the included studies was, however, present. In study II, we aimed to investigate the analgesic, anti-hyperalgesic and anti-inflammatory effects of exogenous melatonin in a validated human inflammatory pain model, the human burn model. The study was performed as a randomized, double blind placebo-controlled crossover study. Primary outcomes were pain during the burn injury and areas of secondary hyperalgesia. No significant effects of exogenous melatonin were observed with respect to primary or secondary outcomes, compared to placebo. Study III and IV estimated the pharmacokinetic variables of exogenous melatonin. Oral melatonin demonstrated a t max value of 41 minutes. Bioavailability of oral melatonin was only 3%. Elimination t 1/2 were approximately 45 minutes following both oral and intravenous administration, respectively. High-dose intravenous melatonin was not associated with increased sedation, in terms of simple reaction times, compared to placebo. Similarly, no other adverse effects were reported. In Study V, we aimed to re-analyse data obtained from a randomized analgesic drug trial by a selection of

  7. Synthesis and Analgesic Activity Evaluation of Some Agmatine Derivatives

    Directory of Open Access Journals (Sweden)

    Song Li

    2006-06-01

    Full Text Available A series of N,N’-disubstituted-2-nitroethene-1,1-diamine and N,N’-disubstituted- N’’-cyanoguanidine derivatives were prepared and evaluated for in vivo analgesic activity. The blood brain barrier (BBB VolSurf model was used to predict the BBB permeation profiles of our synthesized compounds. Some compounds show both remarkable analgesic activity and good BBB permeation profiles, and these compounds might be developed for treatment of opioid tolerance and dependence.

  8. The impact of intrahepatic microcapsule transplantation on the liver function and liver blood flow: a comparative study of different transplantation approaches

    International Nuclear Information System (INIS)

    Ai Zhaodong; Wang Wei; Gao Feng; Rong Pengfei; Zheng Wei; Dong Qiong; Liu Sheng

    2011-01-01

    Objective: to compare the impact of intrahepatic microcapsule transplantation on the liver function and liver blood flow between via portal vein approach and via hepatic artery approach. Methods: Twenty healthy male dogs were randomly and equally divided into four groups: A1, A2, V1 and V2. For group V1 and group V2, the microcapsules were implanted into portal vein through percultaneous transhepatic approach under ultrasonographic guidance, while for group A1 and group A2, the microcapsules were implanted into hepatic artery through hepatic artery catheterization. The quantity of microcapsules implanted into group A1 and group A2 was 32000 microcapsule/Kg and 48000 microcapsule/Kg respectively, while for group V1 and group V2 was 16000 microcapsule/Kg and 32000 microcapsule/Kg respectively. Before, during and after the microcapsule transplantation ultrasonography was performed to determine the hepatic blood flow rate as well as the diameter of the portal vein. ALT, AST and the main serum liver fibrosis indexes were measured before and after the transplantation. Samples of the livers were pathologically examined before and after the operation. The results were compared between each group. Results: No significant changes in blood flow rate of main portal vein was found after the transplantation in both group A1 and group A2. In both group V1 and group V2 the blood flow of main portal vein became slow during the procedure but recovered quickly. No significant difference in portal blood flow rate existed between each group one week after the operation (P>0.05). Shortly after the transplantation the ALT and AST levels showed an increase of different degree in all dogs, which reached its peak at 24 hours after the operation. The increase in ALT and AST levels was most sharp in group V2 while most minor in group A1. The ALT and AST levels gradually returned to normal two weeks later. The difference in ALT and AST levels between every group was significant (P<0

  9. Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

    International Nuclear Information System (INIS)

    Bae, Joonwon

    2011-01-01

    Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer-PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT-C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT-C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT-C microcapsules were measured with a lithium battery half cell tests. - Graphical Abstract: Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method. Highlights: → Polymeric microcapsules containing Si-CNT transformed to carbon microcapsules. → Accommodate volume changes of Si NPs during Li ion charge/discharge. → Sizes of microcapsules were controlled by experimental parameters.

  10. Stiffness-Independent Highly Efficient On-Chip Extraction of Cell-Laden Hydrogel Microcapsules from Oil Emulsion into Aqueous Solution by Dielectrophoresis.

    Science.gov (United States)

    Huang, Haishui; Sun, Mingrui; Heisler-Taylor, Tyler; Kiourti, Asimina; Volakis, John; Lafyatis, Gregory; He, Xiaoming

    2015-10-28

    A dielectrophoresis (DEP)-based method achieves highly efficient on-chip extraction of cell-laden microcapsules of any stiffness from oil into aqueous solution. The hydrogel microcapsules can be extracted into the aqueous solution by DEP and interfacial tension forces with no trapped oil, while the encapsulated cells are free from electrical damage due to the Faraday cage effect. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Analgesic effects of manual therapy in patients with musculoskeletal pain: a systematic review

    NARCIS (Netherlands)

    J. Nijs; Dr. L.P. Voogt; F. Struyf; M. Meeys; D. Meuffels; J. de Vries

    2015-01-01

    BACKGROUND: Current evidence shows that manual therapy elicits analgesic effect in different populations (healthy, pain inflicted and patients with musculoskeletal pain) when carried out at the spinal column, although the clinical significance of these effects remains unclear. Also the analgesic

  12. Phytochemical, analgesic and anti-inflammatory studies of the ...

    African Journals Online (AJOL)

    Results: The preliminary phytochemical screening of the methanol leaf extract revealed the presence of terpenes, flavonoids, tannins, saponins and ... The analgesic studies were carried out at doses of 75, 150 and 300 mg/kg body weight i.p. using acetic acid-induced writhing and thermally-induced pain in mice. The extract ...

  13. ANALGESIC ACTIVITY OF FICUS ARNOTTIANA (MIQ) LEAVES EXTRACT

    OpenAIRE

    Chandaker Amol; Saha Rajsekhar

    2011-01-01

    The methanolic extract of leaves of Ficus arnottiana was used to evaluate the analgesic activity. The above activity was evaluated using the eddy’s hot plate and heat conduction method and acetic acid induced writing in mice. The dose used for the test of activity (100, 200. 400 mg/kg i.p). The extract at all doses tested significantly (P

  14. Phytochemical, Analgesic And Anti-Inflammatory Effects Of The ...

    African Journals Online (AJOL)

    Phytochemical screening was carried out on the ethylacetate portion of the ethanolic extract of the leaves of Pseudocedrella kotschyii and then evaluated for its analgesic (acetic acid-induced writhing) and anti-inflammatory (raw egg albumin-induced oedema) activities in mice and rats respectively. Phytochemical screening ...

  15. analgesic and anti-inflammatory activities of ethanolic extract of ...

    African Journals Online (AJOL)

    2015-04-30

    Apr 30, 2015 ... The analgesic and anti-inflammatory activities of the ethanolic extract of Rheumatic Tea Formula ... Salix alba were studied in mice and rats using acetic acid induced writhing, hot plate method, ... albino mice, while the phytochemical screening showed the presence of alkaloids, tannins and glycosides.

  16. Anti-Inflamatory and Analgesic Activities of Securidaca ...

    African Journals Online (AJOL)

    Securidaca longepedunculata Fers (Polygalaceae) is commonly used in many parts of Africa for the treatment of rheumatic conditions, fever, headache and various other inflammatory based diseases. The present study was carried out to evaluate the anti-inflammatory and analgesic activity of Securidaca longepedunculata ...

  17. Antisecretory and analgesic activities of Terminalia bellerica | Khan ...

    African Journals Online (AJOL)

    This study describes the antisecretory and analgesic activities of the crude extract of Terminalia bellerica (Tb.Cr). T. bellerica extract inhibited the castor oil-induced intestinal fluid secretion in mice at the dose range of 300 - 1000 mg/kg. The extract also dose-dependently (50 - 100 mg/kg) reduced the numbers of acetic ...

  18. Anti-inflammatory, analgesic and antipyretic activities of the aqueous ...

    African Journals Online (AJOL)

    The aqueous extract of Hippobromus pauciflorus (L.f) Radlk leaves at 50, 100 and 200 mg/kg body weight were evaluated for anti-inflammatory, analgesic and antipyretic activities in male rats. Antiinflammatory activity was studied by using carrageenan and histamine induced oedema right hind paw volume while the ...

  19. Evaluation of analgesic and anti-inflammatory activities of ...

    African Journals Online (AJOL)

    Background: Bovine mastitis is one of the most relevant and problematic diseases to treat and control in practice. Puxing Yinyang San (PYS) is a compound of herbs to treat bovine mastitis in China. This study was performed to evaluate the analgesic and anti-inflammatory activities of PYS in mice and rats. Materials and ...

  20. Synthesis, Analgesic, Anti-inflammatory and Antimicrobial Activities ...

    African Journals Online (AJOL)

    Purpose: Microbial infections often produce pain and inflammation. Chemotherapeutic, analgesic and anti-inflammatory drugs are prescribed simultaneously in normal practice. The compound possessing all three activities is not common.The purpose of the present study was to examine whether molecular modification ...

  1. Evaluation of anti-inflammatory, analgesic, and antipyretic effects of ...

    African Journals Online (AJOL)

    This study investigated the possible anti-inflammatory, analgesic, and antipyretic effects of ethanolic extract of Pedalium murex Linn. fruits in selected experimental animal models. Anti-inflammatory activity of Pedalium murex Linn., with doses of 200 mg/kg and 400 mg/kg, p.o., was evaluated by Lambda-carrageenan ...

  2. Investigation of the in vitro metabolism of the analgesic flupirtine

    Czech Academy of Sciences Publication Activity Database

    Methling, K.; Reszka, P.; Lalk, M.; Vrána, Oldřich; Scheuch, E.; Siegmund, W.; Terhaag, B.; Bednarski, P.J.

    2009-01-01

    Roč. 37, č. 3 (2009), s. 479-493 ISSN 0090-9556 R&D Projects: GA AV ČR(CZ) 1QS500040581 Institutional research plan: CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : flupirtine * analgesic * metabolism Subject RIV: BO - Biophysics Impact factor: 3.743, year: 2009

  3. Studies on the anti-inflammatory, analgesic and antipyrexic activities ...

    African Journals Online (AJOL)

    The bioactivity of this compound was assessed using carrageenan-induced paw oedema in rats and carrageenan-induced pulmonary oedema in mice for the antiinflammatory activity, while acetic acid-induced writhing test in mice and zymosan-induced fever in rats were used for analgesic test. Materials and Methods: Rats ...

  4. Evaluation of Analgesic, Anticonvulsant and Hypnotic activities of ...

    African Journals Online (AJOL)

    AqPs (100-400mg/kg i.p.) also demonstrated a protective effect against strychnine-induced convulsion. The extract potentiated the hypnotic effect of hexobarbitone following i.p. injection at the dose levels studied. The results suggested that AqPs possesses potential analgesic, anticonvulsive and hypnotic properties.

  5. Stress and use of over-the-counter analgesics

    DEFF Research Database (Denmark)

    Koushede, Vibeke Jenny; Ekholm, Ola; Holstein, Bjørn E

    2011-01-01

    To examine the prevalence of over-the-counter analgesic (OTCA) use and perceived stress among 25 to 44-year-old men and women from 1994 to 2005; to examine the association between stress and OTCA use over time, and to explore whether the association attenuates when controlled by stress...

  6. Role of Magnesium Sulfate in Prolonging the Analgesic Effect of ...

    African Journals Online (AJOL)

    antinociceptive effect in animal and human pain models. i.v magnesium ... about 30 min prior to surgery followed by continuous infusion at the rate of 10 mg/kg/h for the next 24 h while the other group received similar ... of analgesia and reduces postoperative analgesic consumption without any significant side effects.

  7. Analgesic and anti-inflammatory effects of Cyphostemma vogelii (Hook

    African Journals Online (AJOL)

    Rita

    2013-04-24

    Apr 24, 2013 ... Key words: Analgesic, anti-inflammatory, mice, Cyphostemma vogelii, nociception. ... steroidal anti- inflammatory drugs (NSAIDs) are considered the drugs of ..... 44-55. Hughes H, Lang M (1983). Control of pain in dogs and cats In: Kitchell. R, Erickson H (eds.) Animal pain. Baltimore Waverly press. pp. 207-.

  8. Analgesic compounds from Scorzonera latifolia (Fisch. and Mey.) DC

    Czech Academy of Sciences Publication Activity Database

    Bahadir, Ö.; Citoglu, G. S.; Šmejkal, K.; Dall Acqua, S.; Özbek, H.; Cvačka, Josef; Žemlička, M.

    2010-01-01

    Roč. 131, č. 1 (2010), s. 83-87 ISSN 0378-8741 Institutional research plan: CEZ:AV0Z40550506 Keywords : Scorzonera latifolia * analgesic activity * triterpenes Subject RIV: CC - Organic Chemistry Impact factor: 2.466, year: 2010

  9. The analgesic, haematological and some physiological effects of ...

    African Journals Online (AJOL)

    The aim of this research is to investigate the analgesic, haematologic and some physiological effects of extradural bupivacaine on dogs using six clinically healthy adult male dogs. The method used is by obtaining baseline data for physiological variables from each dogs using the multiparameter patient monitors (GD3, ...

  10. Post- operative analgesic effect of epidural bupivacaine alone and ...

    African Journals Online (AJOL)

    The study was conducted from December, 2013 to May, 2014 on 12 healthy bitches presented to the University of Gondar Teaching Veterinary Clinic for ovariohysterectomy to compare the epidural analgesic efficacy of bupivacaine alone and bupivacaine with tramadol to relieve postoperative pain and asses changes on ...

  11. Comparative Chemical And Analgesic Properties Of Essential Oils ...

    African Journals Online (AJOL)

    The chemical and analgesic comparison of essential oils of Cymbopogon nardus (L) Rendle of Benin and Congo was investigated. The Chemical analysis wa carried out by using GS/MS for identification of components of the two essential oils while acetic acid-induced writhings, hot plate and tail flick test models were used ...

  12. Anti-inflammatory and Analgesic Activities of Amorphophallus bulbifer

    African Journals Online (AJOL)

    Purpose: To investigate the anti-inflammatory and analgesic activities of the Amorphophallus Bulbifer in Wistar rats and mice. Methods: The anti-inflammatory activity of the hydroalcohol extract of A. bulbifer whole plant at dose levels of 100 and 200 mg/kg p.o. in rats was determined with a plethysmograph paw volume ...

  13. Analgesic and anti-inflammatory activities of ethanolic extract of ...

    African Journals Online (AJOL)

    The analgesic and anti-inflammatory activities of the ethanolic extract of Rheumatic Tea Formula (RTF) a polyherbal tea consisting the leaves of Eucalyptus globulus, Albizia chevalieri and bark of Salix alba were studied in mice and rats using acetic acid induced writhing, hot plate method, formalin induced pain and ...

  14. Determination of percentage of caffeine content in some analgesic ...

    African Journals Online (AJOL)

    Two methods were employed for the determination of percentage Caffeine content in three brands of analgesic tablets which are; Extraction using only water as a solvent and Extraction using both water and chloroform as solvents, watch glass has been used as the weighing apparatus and the percentage of Caffeine ...

  15. The analgesic effect of diclofenac sodium administered via the ...

    African Journals Online (AJOL)

    ... investigate the characteristics of the analgesic effect of diclofenac sodium injected epidurally in single or repeated doses and whether tolerance develops in long‑term use. Materials and Methods: A total of 30 rats were included in the study. The rats were anesthetized using intraperitoneal ketamine hydrochloride and an ...

  16. The Analgesic Effect of Pineapple Fruit Juice on Mice

    Directory of Open Access Journals (Sweden)

    Ainul Atiqah binti Hilmi

    2014-08-01

    Full Text Available Background: Pain is a feeling stimulated by the nervous system which can be suppressed by giving an analgesic agent. Some studies revealed that pineapples have an analgesic effect. This study aim was to determine analgesic effect of pineapple on mice. Methods: In this experimental study, the effect was examined by using a writhing method on the 28 male mice. Subjects were divided into 4 groups with 7 mice each. The control group received aquades and other groups received pineapple fruit juice with 20%, 40% and 80% concentration with the dosage of 10 mL/kg/body weight. After 30 minutes, 3% acetic acid was injected intraperitoneally to induce pain. Writhing responseswere observed every 5 minutes for 30 minutes. Results: The result for mean of total writhing reaction was 2.39±0.40, 1.92±0.40, 1.50±2.13, 1.66±0.11 respectively for group 1 to 4. These data indicated a significant decrease of total writhing response in mice with 20%, 40% and 80% concentration compared to control group (p=0.023;p=0.000 and p=0.000 respectively. Most optimal concentration was40% with the protective percentage equal to 71.8%. Conclusion: Pineapple fruit juice concentrations (20%, 40%, and 80%has an analgesic effect with the most optimal concentration of 40%.

  17. Anti-inflammatory and analgesic activities of leaf extracts of ...

    African Journals Online (AJOL)

    The aqueous, methanol and chloroform extracts of Landolphia owariensis ... rats and the nociception induced by Tail immersion in hot water (50.0 ± 1.00C) and ... (acetic acid) MELO produced the highest and comparable analgesic activity to ...

  18. NSAID and other analgesic use by endurance runners during ...

    African Journals Online (AJOL)

    Background. An increasing popularity of ultra-endurance events coupled with excessive or inappropriate non-steroidal anti-inflammatory drug (NSAID) use during such events could pose considerable potential risks to runners' health. Objective. To evaluate the incidence of NSAID and other analgesic use in distance ...

  19. Intravenous analgesics for pain management in post- operative ...

    African Journals Online (AJOL)

    Intravenous analgesics for pain management in post- operative patients: a comparative study of their efficacy and adverse ... patient anxiety, stress, and dissatisfaction. Adequate ... genders who were scheduled to undergo abdominal surgery (hemicolectomy, exploratory ... analysis (n = 48) and separated into three groups.

  20. Analgesic and Antipyretic Activities of Drymaria cordata (Linn.) Willd ...

    African Journals Online (AJOL)

    Also, D. cordata produced significant (p<0.05) dose-dependent inhibition of temperature elevation in the 2,4-DNP and yeast-induced hyperthermia models with ... that the aqueous whole plant extract of Drymaria cordata possesses analgesic and antipyretic properties mediated through peripheral and central mechanisms.

  1. Outlook Analgesic Infusion Pumps Market Size - Trends and Opportunity Forecast to 2023

    OpenAIRE

    nishthavohra

    2018-01-01

    Analgesic infusion pumps are instruments used to carry analgesic drugs directly into patient’s body directly for pain management. Analgesic drugs provide relief from chronic disorders, including complex regional pain syndrome (CRPS), failed back syndrome pain, myocardial infarction, pneumonia, myocardial ischemia, post-operative pain, and hypertension. Lidocaine, phenol and morphine are some of the common medicines used in analgesic infusion pumps. Explore Report At: https://www.psmarket...

  2. Fabrication of Microcapsules for Dye-Doped Polymer-Dispersed Liquid Crystal-Based Smart Windows.

    Science.gov (United States)

    Kim, Mingyun; Park, Kyun Joo; Seok, Seunghwan; Ok, Jong Min; Jung, Hee-Tae; Choe, Jaehoon; Kim, Do Hyun

    2015-08-19

    A dye-doped polymer-dispersed liquid crystal (PDLC) is an attractive material for application in smart windows. Smart windows using a PDLC can be operated simply and have a high contrast ratio compared to those of other devices that employed photochromic or thermochromic material. However, in conventional dye-doped PDLC methods, dye contamination can cause problems and has a limited degree of commercialization of electric smart windows. Here, we report on an approach to resolve dye-related problems by encapsulating the dye in monodispersed capsules. By encapsulation, a fabricated dye-doped PDLC had a contrast ratio of >120 at 600 nm. This fabrication method of encapsulating the dye in a core-shell structured microcapsule in a dye-doped PDLC device provides a practical platform for dye-doped PDLC-based smart windows.

  3. Microcapsule-based techniques for improving the safety of lithium-ion batteries

    Science.gov (United States)

    Baginska, Marta

    developed to simulate an overheating condition while the cell is cycling. Experimental protocols are developed to assess the performance of the separator in terms of its ability to perform autonomic shutdown and examine tested battery materials using scanning electron microscopy. Another approach to improving battery functionality is via the microencapsulation of battery additives. Currently, additives are added directly into a battery electrolyte, and while they typically perform their function given a sufficient loading, these additives often do so at the expense of battery performance. Microencapsulation allows for a high loading of additives to be incorporated into the cell and their release triggered only when and where they are needed. In this work, microencapsulation techniques are developed to successfully encapsulate 3-hexylthiophene, a stabilizing agent for high-voltage cathodes in Li-ion batteries and conductive polymer precursor, as well as the flame retardant Tris(2-choloroethyl phosphate) (TCP). Microcapsules containing 3-hexylthiophene are coated onto model battery electrodes and immersed in electrolyte. The microcapsule shell wall insulates the 3-hexylthiophene until the microcapsules are mechanically crushed and electropolymerization of the released core to form poly(3-ht) occurs under cyclic voltammetry. In addition, TCP was encapsulated using in situ polymerization. TCP-containing microcapsules are stable in electrolyte at room temperature, but are thermally triggered to release their payload at elevated temperatures. Experimental protocols are developed to study the in situ triggering and release of microencapsulated additives.

  4. [Analgesic abuse and psychiatric comorbidity in headache patients].

    Science.gov (United States)

    Radat, F; Irachabal, S; Swendsen, J; Henry, P

    2002-01-01

    Headache patients frequently overuse analgesic medications: 20% of the patients from headache centers is concerned by this problem, which has been estimated to occur in four percent of the community migrainers. Frequent use of various types of headache medication may paradoxically cause an increase in headache attack frequency as well as their chronicisation due to potentially complex mechanisms of sensitization. Patients will enter into a self- perpetuating cycle of daily headaches and use of symptomatic medications which can lead to addiction and to social and occupational impairement. Indeed, many patients will experience pharmacological tolerance and dependence but also by some kind of craving. International Headache Society qualify these patients as abusers referring mostly to the amount of substance ingested. Hence patients are labelled analgesic abusers . However, as many of these analgesic medications contained psychotropic substances (i.e. caffeine, codeine.), these patients may fulfill DSM IV criteria of dependance. Nevertheless, the dependance criteria should be adapted to chronic pain patients. Indeed, if pharmacological dependence and tolerance criteria are easy to apply in such patients, it is not the case for the criteria a great deal of time spent to obtain substances, to use substances or to recover from substances effects . As analgesic medications are legally obtained from medical practitioners, drug seeking behaviours are mostly: obtaining medications from multiple providers, repeating episodes of prescription loss and multiplying requests for early refills. Moreover the detrimental effects of analgesic abuse on psychosocial functioning is likely to be related to pain rather than to medication overuse. Finally the best indicator of addictive behaviors in such patients, is the loss of control over the use of analgesic medication despite the adverse consequences over pain. Comorbidity with addiction to other substances has never been specifically

  5. Preparation of thermally stable microcapsules with a chitosan-silica hybrid.

    Science.gov (United States)

    Kang, Hong-Yi; Chen, Hui-Huang

    2014-09-01

    Addition of microcapsules with a high dielectric constant and low specific heat capacity to a battered layer was designed to create a higher temperature in the crust than in the prefried fish nuggets to prevent the water vapor in the fish nuggets from migrating to the crust during microwave heating. Therefore, chitosan-silica hybrids and soybean oil were utilized to prepare the shell and core of the thermally stable microcapsules (MC(CS)), respectively. The MC(CS) were prepared by sol-gel coacervation from an oil-in-water emulsion. The sodium silicate was hydrolyzed and coacervated through polymerization for 24 h at pH 5. The zeta potential analysis indicated that chitosan with a positive charge and silica with a negative charge interacted through electrostatic attraction to form a hybrid shell. The volume mean particle size and encapsulation efficiency of the MC(CS) were 9.6 ± 0.2 μm and 75.6% ± 1.3%, respectively, when oil/chitosan = 0.2 and chitosan/silica = 0.5 (w/w). In addition to H-bonding and electrostatic attraction, Si-O-N bonds were formed between chitosan and silica. Dehydration of the bound water in the MC(CS) was observed in the range of 25 to 250 °C in the differential scanning calorimetry thermal analysis, with the lack of apparent thermal peaks indicating its high thermal stability. The decrease of force to cut the crust observed by texture analysis as well as the increase of hedonic score by consumer acceptance test revealed the addition of 1% MC(CS) significantly improved the crispness of the crust in the microwave-reheated nuggets. © 2014 Institute of Food Technologists®

  6. Characterization of microcapsulated β-carotene formed by complex coacervation using casein and gum tragacanth.

    Science.gov (United States)

    Jain, Ashay; Thakur, Deepika; Ghoshal, Gargi; Katare, O P; Shivhare, U S

    2016-06-01

    Complex coacervation in casein/gum tragacanth (CAS/GT) mixtures was studied as a function of pH, initial protein to polysaccharide mixing ratio (Pr:Ps), total biopolymer concentration, core material load and ionic strength. This study is aimed at understanding how these parameters influence the coacervation kinetics, the coacervate yield, and entrapment efficiency. At a Pr:Ps=2:1, an optimum pH of complex coacervation was found 4.35, at which the intensity of electrostatic interaction was maximum. At these conditions, the phase separation occurred the fastest and the final coacervate yield and entrapment efficiency were the largest. Moreover, the developed β-carotene loaded microcapsules formulation was found to have particle size 159.71±2.16μm, coacervates yield 82.51±0.412%, entrapment efficiency 79.36±0.541%. Varying the Pr:Ps shifted the value of optimum pH. Electrostatic interaction and formation of coacervates was confirmed by Fourier Transform Infra Red (FTIR) spectra. Size and surface properties of coacervates were studied using Scanning Electron Microscopy (SEM). Entrapment of core material within the coacervates was confirmed by Confocal Laser Scanning Microscope (CLSM). The resultant formulation was evaluated for release study and antioxidant activity. Stability of encapsulated β-carotene was evaluated under three levels of temperature (5, 25 and 40°C) for 3 months. Encapsulation strongly increased the stability of micronutrients. Our results advocate potential of microcapsules as a novel carrier for the safeguard and sustained release of micronutrient. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Imatinib-loaded polyelectrolyte microcapsules for sustained targeting of BCR-ABL+ leukemia stem cells.

    Science.gov (United States)

    Palamà, Ilaria E; Leporatti, Stefano; de Luca, Emanuela; Di Renzo, Nicola; Maffia, Michele; Gambacorti-Passerini, Carlo; Rinaldi, Ross; Gigli, Giuseppe; Cingolani, Roberto; Coluccia, Addolorata M L

    2010-04-01

    The lack of sensitivity of chronic myeloid leukemia (CML) stem cells to imatinib mesylate (IM) commonly leads to drug dose escalation or early disease relapses when therapy is stopped. Here, we report that packaging of IM into a biodegradable carrier based on polyelectrolyte microcapsules increases drug retention and antitumor activity in CML stem cells, also improving the ex vivo purging of malignant progenitors from patient autografts. Microparticles/capsules were obtained by layer-by-layer (LbL) self-assembly of oppositely charged polyelectrolyte multilayers on removable calcium carbonate (CaCO(3)) templates and loaded with or without IM. A leukemic cell line (KU812) and CD34(+) cells freshly isolated from healthy donors or CML patients were tested. Polyelectrolyte microcapsules (PMCs) with an average diameter of 3 microm, fluorescently labelled multilayers sensitive to the action of intracellular proteases and 95-99% encapsulation efficiency of IM, were prepared. Cell uptake efficiency of such biodegradable carriers was quantified in KU812, leukemic and normal CD34(+) stem cells (range: 70-85%), and empty PMCs did not impact cell viability. IM-loaded PMCs selectively targeted CML cells, by promoting apoptosis at doses that exert only cytostatic effects by IM alone. More importantly, residual CML cells from patient leukapheresis products were reduced or eliminated more efficiently by using IM-loaded PMCs compared with freely soluble IM, with a purging efficiency of several logs. No adverse effects on normal CD34(+) stem-cell survival and their clonogenic potential was noticed in long-term cultures of hematopoietic progenitors in vitro. This pilot study provides the proof-of-principle for the clinical application of biodegradable IM-loaded PMC as feasible, safe and effective ex vivo purging agents to target CML stem cells, in order to improve transplant outcome of resistant/relapsed patients or reduce IM dose escalation.

  8. Chemosensors and biosensors based on polyelectrolyte microcapsules containing fluorescent dyes and enzymes.

    Science.gov (United States)

    Kazakova, Lyubov I; Shabarchina, Lyudmila I; Anastasova, Salzitsa; Pavlov, Anton M; Vadgama, Pankaj; Skirtach, Andre G; Sukhorukov, Gleb B

    2013-02-01

    The concept of enzyme-assisted substrate sensing based on use of fluorescent markers to detect the products of enzymatic reaction has been investigated by fabrication of micron-scale polyelectrolyte capsules containing enzymes and dyes in one entity. Microcapsules approximately 5 μm in size entrap glucose oxidase or lactate oxidase, with peroxidase, together with the corresponding markers Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) dichloride (Ru(dpp)) complex and dihydrorhodamine 123 (DHR123), which are sensitive to oxygen and hydrogen peroxide, respectively. These capsules are produced by co-precipitation of calcium carbonate particles with the enzyme followed by layer-by-layer assembly of polyelectrolytes over the surface of the particles and incorporation of the dye in the capsule interior or in the multilayer shell. After dissolution of the calcium carbonate the enzymes and dyes remain in the multilayer capsules. In this study we produced enzyme-containing microcapsules sensitive to glucose and lactate. Calibration curves based on fluorescence intensity of Ru(dpp) and DHR123 were linearly dependent on substrate concentration, enabling reliable sensing in the millimolar range. The main advantages of using these capsules with optical recording is the possibility of building single capsule-based sensors. The response from individual capsules was observed by confocal microscopy as increasing fluorescence intensity of the capsule on addition of lactate at millimolar concentrations. Because internalization of the micron-sized multi-component capsules was feasible, they could be further optimized for in-situ intracellular sensing and metabolite monitoring on the basis of fluorescence reporting.

  9. Effects of Analgesic Advertisements on Community in Hegarmanah Village, Jatinangor

    Directory of Open Access Journals (Sweden)

    Nurhayati binti Shaharuddin

    2014-08-01

    Full Text Available Background: Currently, there are numerous analgesic advertisements which have been published in various media and have also attracted attention of the society. The aim of this study is to find out effects of analgesic advertisements on awareness and attention towards these advertisements on the community in Hegarmanah Village, Jatinangor. Methods: The study used the descriptive method with participants consisting of community members in Hegarmanah Village who have seen, watched or heard about the analgesic advertisements and who were aged 18 years and above. The sample for this study consisted of 100 respondents. This study was conducted in September 2012–December 2012. Results: The results showed that 82% of the respondents have seen the ads in at least the last 3 months and mostly watched them on television. About 52% of respondents agreed that many of the ads did not provide sufficient information. In addition, 50% only read a little bit of the ads rather than the whole advertisement. Fifty three percents of the respondents had the intention to try the medication after seeing the ads. More than 80% were aware about how to use the medication, medication’s side effects, warnings and contraindications and 65% agreed that, they could make a better decision on their health condition after seeing the ads. Conclusions: The analgesic advertisements indeed affected the community by making them aware about the ads and attracted them to buy as well as try the product itself. Further studies on factors which influence intake of over-the-counter analgesic drugs and also about the self-medication are required. [AMJ.2014;1(2:1–6

  10. Imaging drugs with and without clinical analgesic efficacy.

    Science.gov (United States)

    Upadhyay, Jaymin; Anderson, Julie; Schwarz, Adam J; Coimbra, Alexandre; Baumgartner, Richard; Pendse, G; George, Edward; Nutile, Lauren; Wallin, Diana; Bishop, James; Neni, Saujanya; Maier, Gary; Iyengar, Smriti; Evelhoch, Jeffery L; Bleakman, David; Hargreaves, Richard; Becerra, Lino; Borsook, David

    2011-12-01

    The behavioral response to pain is driven by sensory and affective components, each of which is mediated by the CNS. Subjective pain ratings are used as readouts when appraising potential analgesics; however, pain ratings alone cannot enable a characterization of CNS pain circuitry during pain processing or how this circuitry is modulated pharmacologically. Having a more objective readout of potential analgesic effects may allow improved understanding and detection of pharmacological efficacy for pain. The pharmacological/functional magnetic resonance imaging (phMRI/fMRI) methodology can be used to objectively evaluate drug action on the CNS. In this context, we aimed to evaluate two drugs that had been developed as analgesics: one that is efficacious for pain (buprenorphine (BUP)) and one that failed as an analgesic in clinical trials aprepitant (APREP). Using phMRI, we observed that activation induced solely by BUP was present in regions with μ-opioid receptors, whereas APREP-induced activation was seen in regions expressing NK(1) receptors. However, significant pharmacological modulation of functional connectivity in pain-processing pathways was only observed following BUP administration. By implementing an evoked pain fMRI paradigm, these drugs could also be differentiated by comparing the respective fMRI signals in CNS circuits mediating sensory and affective components of pain. We report a correlation of functional connectivity and evoked pain fMRI measures with pain ratings as well as peak drug concentration. This investigation demonstrates how CNS-acting drugs can be compared, and how the phMRI/fMRI methodology may be used with conventional measures to better evaluate candidate analgesics in small subject cohorts.

  11. Case Report - Analgesic nephropathy as a cause of end‑stage renal ...

    African Journals Online (AJOL)

    Analgesic nephropathy is a subtle but significant cause of chronic renal failure. There is paucity of data on analgesic nephropathy in Nigeria. This case presentation is to highlight the need to have high index of suspicion in patients at risk of developing analgesic nephropathy. In March 2009 a 55‑year‑old businessman was ...

  12. Fiscal 2000 research report on the research on materialss with functions enhanced by microcapsulation technology; 2000 nendo microcapsul ka gijutsu ni yoru kokinoka zairyo gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research is conducted to create materialss equipped, thanks to microcapsulation, with a noise stopping function, vibration damping function, moisture adjusting function, electromagnetic shielding function, and the like, and usable as structural elements as is, that is, materialss known as 'interactive materialss.' For the development of an interactive materials, it is important to incorporate an element, which interacts with external energy, into the materials. A system using interactive materialss when embodied will ensure a safer and more comfortable daily life space. Taking this into consideration, in this fiscal year, studies are made about the technical representation of problems and troubles that jeopardize the safety and comfort of the daily life space, establishment of standards in this connection, interactive features to be realized using microcapsules, possibility of novel interactive characteristics using the same, techniques for the systematization of microcapsules as industrial materialss, techniques for assessing and analyzing materialss characteristics, simulation or the like of a safe and comfortable space using interactive materials-aided systems, and so forth. (NEDO)

  13. Determination of the resistance of fabric printed with triclosan microcapsules to the action of soil micro-flora

    Science.gov (United States)

    Golja, B.; Forte Tavčer, P.

    2017-10-01

    Microcapsules with a pressure-sensitive melamine-formaldehyde wall and triclosan core were printed to 100% cotton fabric with screen printing technique. Previous research showed excellent antibacterial activity (estimated for E. Coli and S. Aureus) of such fabric, so our aim in this research was to determine its resistance to the action of microorganisms present in the soil. The soil burial test was conducted. The breaking strength of the buried samples was measured and also the scanning electron microscope analysis was done. The results showed that none of the samples are resistant to decay. It is evident from SEM micrographs that on all of the buried samples greater morphological changes occur due to the functions of the soil microflora. It can be concluded that the samples printed with triclosan microcapsules are biodegradable which is environmentally preferable.

  14. Chitosan-based microcapsules containing grapefruit seed extract grafted onto cellulose fibers by a non-toxic procedure.

    Science.gov (United States)

    Alonso, Diana; Gimeno, Miquel; Sepúlveda-Sánchez, José D; Shirai, Keiko

    2010-04-19

    A novel non-toxic procedure is described for the grafting of chitosan-based microcapsules containing grapefruit seed oil extract onto cellulose. The cellulose was previously UV-irradiated and then functionalized from an aqueous emulsion of the chitosan with the essential oil. The novel materials are readily attained with durable fragrance and enhanced antimicrobial properties. The incorporation of chitosan as determined from the elemental analyses data was 16.08+/-0.29 mg/g of sample. Scanning electron microscopy (SEM) and gas chromatography-mass spectroscopy (GC-MS) provided further evidence for the successful attachment of chitosan microcapsules containing the essential oil to the treated cellulose fibers. The materials thus produced displayed 100% inhibition of Escherichia coli and Staphylococcus epidermidis up to 48 h of incubation. Inhibition of bacteria by the essential oil was also evaluated at several concentrations. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  15. A Prospective Cohort Study Evaluating the Ability of Anticipated Pain, Perceived Analgesic Needs, and Psychological Traits to Predict Pain and Analgesic Usage following Cesarean Delivery

    Directory of Open Access Journals (Sweden)

    Brendan Carvalho

    2016-01-01

    Full Text Available Introduction. This study aimed to determine if preoperative psychological tests combined with simple pain prediction ratings could predict pain intensity and analgesic usage following cesarean delivery (CD. Methods. 50 healthy women undergoing scheduled CD with spinal anesthesia comprised the prospective study cohort. Preoperative predictors included 4 validated psychological questionnaires (Anxiety Sensitivity Index (ASI, Fear of Pain (FPQ, Pain Catastrophizing Scale, and Eysenck Personality Questionnaire and 3 simple ratings: expected postoperative pain (0–10, anticipated analgesic threshold (0–10, and perceived analgesic needs (0–10. Postoperative outcome measures included post-CD pain (combined rest and movement and opioid used for the 48-hour study period. Results. Bivariate correlations were significant with expected pain and opioid usage (r=0.349, anticipated analgesic threshold and post-CD pain (r=-0.349, and perceived analgesic needs and post-CD pain (r=0.313. Multiple linear regression analysis found that expected postoperative pain and anticipated analgesic needs contributed to post-CD pain prediction modeling (R2=0.443, p<0.0001; expected postoperative pain, ASI, and FPQ were associated with opioid usage (R2=0.421, p<0.0001. Conclusion. Preoperative psychological tests combined with simple pain prediction ratings accounted for 44% and 42% of pain and analgesic use variance, respectively. Preoperatively determined expected postoperative pain and perceived analgesic needs appear to be useful predictors for post-CD pain and analgesic requirements.

  16. Preservation Effect of Two-Stage Cinnamon Bark (Cinnamomum Burmanii) Oleoresin Microcapsules On Vacuum-Packed Ground Beef During Refrigerated Storage

    Science.gov (United States)

    Irfiana, D.; Utami, R.; Khasanah, L. U.; Manuhara, G. J.

    2017-04-01

    The purpose of this study was to determine the effect of two stage cinnamon bark oleoresin microcapsules (0%, 0.5% and 1%) on the TPC (Total Plate Count), TBA (thiobarbituric acid), pH, and RGB color (Red, Green, and Blue) of vacuum-packed ground beef during refrigerated storage (at 0, 4, 8, 12, and 16 days). This study showed that the addition of two stage cinnamon bark oleoresin microcapsules affected the quality of vacuum-packed ground beef during 16 days of refrigerated storage. The results showed that the TPC value of the vacuum-packed ground beef sample with the addition 0.5% and 1% microcapsules was lower than the value of control sample. The TPC value of the control sample, sample with additional 0.5% and 1% microcapsules were 5.94; 5.46; and 5.16 log CFU/g respectively. The TBA value of vacuum-packed ground beef were 0.055; 0.041; and 0.044 mg malonaldehyde/kg, resepectively on the 16th day of storage. The addition of two-stage cinnamon bark oleoresin microcapsules could inhibit the growth of microbia and decrease the oxidation process of vacuum-packed ground beef. Moreover, the change of vacuum-packed ground beef pH and RGB color with the addition 0.5% and 1% microcapsules were less than those of the control sample. The addition of 1% microcapsules showed the best effect in preserving the vacuum-packed ground beef.

  17. Probiotic Ferulic Acid Esterase Active Lactobacillus fermentum NCIMB 5221 APA Microcapsules for Oral Delivery: Preparation and in Vitro Characterization

    Directory of Open Access Journals (Sweden)

    Catherine Tomaro-Duchesneau

    2012-02-01

    Full Text Available Probiotics possess potential therapeutic and preventative effects for various diseases and metabolic disorders. One important limitation for the oral delivery of probiotics is the harsh conditions of the upper gastrointestinal tract (GIT which challenge bacterial viability and activity. One proposed method to surpass this obstacle is the use of microencapsulation to improve the delivery of bacterial cells to the lower GIT. The aim of this study is to use alginate-poly-L-lysine-alginate (APA microcapsules to encapsulate Lactobacillus fermentum NCIMB 5221 and characterize its enzymatic activity and viability through a simulated GIT. This specific strain, in previous research, was characterized for its inherent ferulic acid esterase (FAE activity which could prove beneficial in the development of a therapeutic for the treatment and prevention of cancers and metabolic disorders. Our findings demonstrate that the APA microcapsule does not slow the mass transfer of substrate into and that of the FA product out of the microcapsule, while also not impairing bacterial cell viability. The use of simulated gastrointestinal conditions led to a significant 2.5 log difference in viability between the free (1.10 × 104 ± 1.00 × 103 cfu/mL and the microencapsulated (5.50 × 106 ± 1.00 × 105 cfu/mL L. fermentum NCIMB 5221 following exposure. The work presented here suggests that APA microencapsulation can be used as an effective oral delivery method for L. fermentum NCIMB 5221, a FAE-active probiotic strain.

  18. Probiotic Ferulic Acid Esterase Active Lactobacillus fermentum NCIMB 5221 APA Microcapsules for Oral Delivery: Preparation and in Vitro Characterization

    Science.gov (United States)

    Tomaro-Duchesneau, Catherine; Saha, Shyamali; Malhotra, Meenakshi; Coussa-Charley, Michael; Kahouli, Imen; Jones, Mitchell L.; Labbé, Alain; Prakash, Satya

    2012-01-01

    Probiotics possess potential therapeutic and preventative effects for various diseases and metabolic disorders. One important limitation for the oral delivery of probiotics is the harsh conditions of the upper gastrointestinal tract (GIT) which challenge bacterial viability and activity. One proposed method to surpass this obstacle is the use of microencapsulation to improve the delivery of bacterial cells to the lower GIT. The aim of this study is to use alginate-poly-L-lysine-alginate (APA) microcapsules to encapsulate Lactobacillus fermentum NCIMB 5221 and characterize its enzymatic activity and viability through a simulated GIT. This specific strain, in previous research, was characterized for its inherent ferulic acid esterase (FAE) activity which could prove beneficial in the development of a therapeutic for the treatment and prevention of cancers and metabolic disorders. Our findings demonstrate that the APA microcapsule does not slow the mass transfer of substrate into and that of the FA product out of the microcapsule, while also not impairing bacterial cell viability. The use of simulated gastrointestinal conditions led to a significant 2.5 log difference in viability between the free (1.10 × 104 ± 1.00 × 103 cfu/mL) and the microencapsulated (5.50 × 106 ± 1.00 × 105 cfu/mL) L. fermentum NCIMB 5221 following exposure. The work presented here suggests that APA microencapsulation can be used as an effective oral delivery method for L. fermentum NCIMB 5221, a FAE-active probiotic strain. PMID:24288090

  19. Easy Debonding of Ceramic Brackets Bonded with a Light-Cured Orthodontic Adhesive Containing Microcapsules with a CO2 Laser.

    Science.gov (United States)

    Arima, Shiori; Namura, Yasuhiro; Tamura, Takahiko; Shimizu, Noriyoshi

    2018-03-01

    An easy debonding method for ceramic brackets using a light-cured Bis-GMA resin containing heat-expandable microcapsules and CO 2 laser was investigated. Ceramic brackets are used frequently in orthodontic treatment because of their desirable esthetic properties. However, the application of heavy force to ceramic brackets in debonding can fracture the tooth enamel and ceramic brackets, causing tooth pain. In total, 60 freshly extracted bovine permanent mandibular incisors were divided randomly into 10 groups of 6 specimens each, corresponding to the number of variables tested. Ceramic brackets were bonded to bovine permanent mandibular incisors using an orthodontic bonding agent containing heat-expandable microcapsules at different levels (0-30 wt%) and resin composite paste, and cured by a curing device. The bond strengths were measured before and after CO 2 laser irradiation, and the temperature increase in the pulp chamber in fresh human first premolars was also evaluated. With CO 2 laser irradiation for 5 sec to the bracket, the bond strength in the 25% microcapsule group decreased significantly, to ∼0.17-fold, compared with that of the no-laser group (p brackets, with less debonding time and enamel damage.

  20. Probiotic Ferulic Acid Esterase Active Lactobacillus fermentum NCIMB 5221 APA Microcapsules for Oral Delivery: Preparation and in Vitro Characterization.

    Science.gov (United States)

    Tomaro-Duchesneau, Catherine; Saha, Shyamali; Malhotra, Meenakshi; Coussa-Charley, Michael; Kahouli, Imen; Jones, Mitchell L; Labbé, Alain; Prakash, Satya

    2012-02-16

    Probiotics possess potential therapeutic and preventative effects for various diseases and metabolic disorders. One important limitation for the oral delivery of probiotics is the harsh conditions of the upper gastrointestinal tract (GIT) which challenge bacterial viability and activity. One proposed method to surpass this obstacle is the use of microencapsulation to improve the delivery of bacterial cells to the lower GIT. The aim of this study is to use alginate-poly-L-lysine-alginate (APA) microcapsules to encapsulate Lactobacillus fermentum NCIMB 5221 and characterize its enzymatic activity and viability through a simulated GIT. This specific strain, in previous research, was characterized for its inherent ferulic acid esterase (FAE) activity which could prove beneficial in the development of a therapeutic for the treatment and prevention of cancers and metabolic disorders. Our findings demonstrate that the APA microcapsule does not slow the mass transfer of substrate into and that of the FA product out of the microcapsule, while also not impairing bacterial cell viability. The use of simulated gastrointestinal conditions led to a significant 2.5 log difference in viability between the free (1.10 × 104 ± 1.00 × 103 cfu/mL) and the microencapsulated (5.50 × 106 ± 1.00 × 105 cfu/mL) L. fermentum NCIMB 5221 following exposure. The work presented here suggests that APA microencapsulation can be used as an effective oral delivery method for L. fermentum NCIMB 5221, a FAE-active probiotic strain.

  1. Repeated Time-to-event Analysis of Consecutive Analgesic Events in Postoperative Pain

    DEFF Research Database (Denmark)

    Juul, Rasmus Vestergaard; Rasmussen, Sten; Kreilgaard, Mads

    2015-01-01

    BACKGROUND: Reduction in consumption of opioid rescue medication is often used as an endpoint when investigating analgesic efficacy of drugs by adjunct treatment, but appropriate methods are needed to analyze analgesic consumption in time. Repeated time-to-event (RTTE) modeling is proposed as a way...... to describe analgesic consumption by analyzing the timing of consecutive analgesic events. METHODS: Retrospective data were obtained from 63 patients receiving standard analgesic treatment including morphine on request after surgery following hip fracture. Times of analgesic events up to 96 h after surgery...... were extracted from hospital medical records. Parametric RTTE analysis was performed with exponential, Weibull, or Gompertz distribution of analgesic events using NONMEM®, version 7.2 (ICON Development Solutions, USA). The potential influences of night versus day, sex, and age were investigated...

  2. Post natal use of analgesics: comparisons between conventional postnatal wards and a maternity hotel.

    Science.gov (United States)

    Nordeng, Hedvig; Eskild, Anne; Nesheim, Britt-Ingjerd

    2010-04-01

    To investigate factors related to analgesic use after delivery, and especially whether rates of analgesic use were different in a midwife-managed maternity hotel as compared to conventional postnatal wards. One maternity hotel and two conventional postnatal wards at Ullevål University Hospital in Oslo, Norway. Data were obtained from hospital records for 804 women with vaginal deliveries. Postnatal analgesic use. Overall, approximately half the women used analgesics after vaginal delivery in both conventional postnatal wards and maternity hotel. The factors that were significantly associated with use of analgesics postnatally in multivariate analysis were multiparity, having a non-Western ethnicity, smoking in pregnancy, younger age, instrumental delivery, analgesic use during labour, maternal complications post partum, and duration of postnatal stay 4 days or more. The use of analgesics is determined by socio-demographic and obstetric factors rather than the organisation of the ward.

  3. Use of common analgesic medications and ovarian cancer survival

    DEFF Research Database (Denmark)

    Dixon, Suzanne C; Nagle, Christina M; Wentzensen, Nicolas

    2017-01-01

    BACKGROUND: Nonsteroidal anti-inflammatory drugs (NSAIDs) have been associated with improved survival in some cancers, but evidence for ovarian cancer is limited. METHODS: Pooling individual-level data from 12 Ovarian Cancer Association Consortium studies, we evaluated the association between self......-reported, pre-diagnosis use of common analgesics and overall/progression-free/disease-specific survival among 7694 women with invasive epithelial ovarian cancer (4273 deaths). RESULTS: Regular analgesic use (at least once per week) was not associated with overall survival (pooled hazard ratios, pHRs (95......% confidence intervals): aspirin 0.96 (0.88-1.04); non-aspirin NSAIDs 0.97 (0.89-1.05); acetaminophen 1.01 (0.93-1.10)), nor with progression-free/disease-specific survival. There was however a survival advantage for users of any NSAIDs in studies clearly defining non-use as less than once per week (pHR=0...

  4. Analgesic Effects of Botulinum Toxin in Children with CP

    DEFF Research Database (Denmark)

    Sandahl Michelsen, Josephine; Normann, Gitte; Wong, Christian

    2018-01-01

    Experiencing pain is the greatest contributor to a reduced quality of life in children with cerebral palsy (CP). The presence of pain is quite common (~60%) and increases with age. This leads to missed school days, less participation, and reduced ambulation. Despite these alarming consequences...... of disorders and could potentially have an analgesic effect in children with CP as well. Even though most of the studies presented here show promising results, many also have limitations in their methodology as it is unlikely to capture all dimensions of pain in this heterogeneous group using only one...... assessment tool. In this review, we present a new way of examining the analgesic effect of botulinum toxin in children with CP using a variety of pain scores....

  5. Anti-inflammatory, Analgesic and Antiulcer properties of Porphyra vietnamensis

    Directory of Open Access Journals (Sweden)

    Saurabh Bhatia

    2014-12-01

    Full Text Available Objectives: Aim of the present work was to investigate the anti-inflammatory, analgesic and antiulcer effects of red seaweed Porphyra vietnamensis (P. vietnamenis. Materials and Methods: Aqueous (POR and alcoholic (PE fractions were successfully isolated from P. vietnamenis. Further biological investigations were performed using a classic test of paw edema induced by carrageenan, writhing induced by acetic acid, hot plate method and naproxen induced gastro-duodenal ulcer. Results: Among the fractions POR showed better activity.  POR and PE significantly (p < 0.05 reduced carrageenan induced paw edema in a dose dependent manner. In the writhing test POR significantly (p < 0.05 reduced abdominal writhes than PE.  In hot plate method POR showed better analgesic activity than PE. POR showed comparable ulcers reducing potential (p

  6. Analgesic effect of butorphanol and levomethadone in detomidine sedated horses.

    Science.gov (United States)

    Schatzman, U; Armbruster, S; Stucki, F; Busato, A; Kohler, I

    2001-08-01

    The analgesic potency of butorphanol 25 microg/kg bodyweight (BW) and levomethadone 100 microg/kg BW, administered together with detomidine 10 microg/kg BW, was measured in twelve Warmblood horses in a randomized, blinded cross-over study. Detomidine with saline 10 ml 0.9% was used as placebo. The nociceptive threshold was determined using a constant current and a pneumatic pressure model for somatic pair Detomidine alone and in combination with butorphanol or levomethadone caused a significant temporary increase (P detomidine alone to both test methods. No significant difference between butorphanol and levomethadone was registered. It is concluded that the addition of butorphanol or levomethadone to detomidine increases the nociceptive threshold to somatic pain and prolongs the analgesic effect of detomidine in the horse.

  7. Analgesic stairway in the treatment of oncological pain

    Directory of Open Access Journals (Sweden)

    Sarah María Regueira Betancourt

    2015-10-01

    Full Text Available Pain represents the main symptom in an important group of patients who are in active treatment for cancer and in sick people in a very advanced stage. The objective of this article is to review the basic pharmacology of the nonsteroidal antiinflammatory drugs, weak opioids, bigger opioids, as well as the different special pharmacological and non- pharmacological techniques that constitute the analgesic stairway in the management of patients who are suffering from oncological pain.

  8. ANALGESIC EFFICACY OF TRAMADOL IN PEDIATRIC TONSILLECTOMY WITH ADENOIDECTOMY

    Directory of Open Access Journals (Sweden)

    Janez Benedik

    2015-05-01

    Full Text Available Background: Tonsillectomy is one of the most commonly performed surgical prcedures in childhood. Acute pain after tonsillectomy and adenoidectomy can be treated with non-opioid and opioid analgesics. Our hypothesis stated that tramadol iv after induction of anaesthesia has superior analgesic effect compared to acetaminophen.Methods:  In a prospective, randomised study we compared analgesic efficacy of tramadol (group T: 2 mg/kgBW iv and acetaminophen (group A: elixir 15 mg/kgBW before op. procedure in a group of 108 children (age 3-7 years. Exclusion critheria: allergy, liver or kidney failure, epilepsy, febrile convulsions. A standard anaesthetic technique was used: propofol, alfentanil, vecuronium, positive pressure ventilation with 60% nitrous oxide in oxygen. After the procedure each child received acetaminophen suppositories (10 mg/kgBW/4-6h and combined suppositories. Monitoring: vital signs during and after op. procedure, pain intensity on the ward (facial pain score.    Results: There were no significant differences between the two groups in age distribution (mean age 5,2 years, ASA physical status, body weight, operative procedure, pain scores (VAS 6h after operative procedure; group T: 4,21±1,45; group A: 4,06±1,33, oxygen saturation, pulse frequency and the consumption of acetaminophen suppositories. Significant difference was in the consumption of combined suppositories (group T: 1,85±0,79; group A: 1,43±0,69, p=0,003.   Conclusion: Our study has shown, that tramadol is not a superior analgesic for the relief of posttonsillectomy pain in children compared to acetaminophen. 

  9. Joint pain epidemiology and analgesic usage in Madagascar.

    Science.gov (United States)

    Samison, Luc Hervé; Randriatsarafara, Fidiniaina Mamy; Ralandison, Stéphane

    2017-01-01

    To describe the epidemiology of joint pains and document analgesics usage in an African context. Patients suffering from joint pain were recruited from nine sites located in Antananarivo, Madagascar, including 6 hospital services and 3 clinics. Doctors collected information on the etiology and characteristics of the patients' pain. Analgesics prescribed by these doctors were also documented. In total, 400 patients were enrolled in the study (52.5% women, mean age of 42.34 years ± 17.7 [4-86]). Pain of mechanical type was found in 260 participants, 65%; 95% CI [60.1% to 69.6%] and inflammatory type pains in 128 cases 32%; 95% CI [27.5% to 36.9%]. Mixed pains were found in 12 patients (3%). The median duration of pain prior to the consultation was 6.5 days. The average pain intensity was 57.9 ± 19.9 mm of a total of 100 mm maximum on a visual analogue scale, VAS. The etiologies of mechanical type pains were dominated by fracture, common low back pain and tendonitis. Arthrosis was the dominant cause of inflammatory type pain, followed by rheumatoid arthritis and gout. NSAIDs (74.5%) were the most frequently prescribed analgesics followed by paracetamol (49.5%), weak opioids (23%) and corticosteroids (12.25%). Two-thirds of medical prescriptions (65.3%) were of combined analgesics. These findings demonstrated that mechanical type pains were the main reason for consultations for joint pain in these situations in Antananarivo, Madagascar. The most frequently prescribed pain-relieving medications were NSAIDs, paracetamol, weak opioids and corticosteroids. This descriptive study may be a useful starting point for further epidemiological studies of pain in the African context.

  10. Analgesic, diuretic, and anti-inflammatory principle from Scoparia dulcis.

    Science.gov (United States)

    Ahmed, M; Shikha, H A; Sadhu, S K; Rahman, M T; Datta, B K

    2001-08-01

    Scoparinol, a diterpene, isolated from Scoparia dulcis showed significant analgesic (p < 0.001) and anti-inflammatory activity (p < 0.01) in animals. A sedative action of scoparinol was demonstrated by a marked potentiation of pentobarbital-induced sedation with a significant effect on both onset and duration of sleep (p < 0.05). Measurement of urine volume after administration of scoparinol indicated its significant diuretic action.

  11. [Toxicity of analgesics in the family doctor practice].

    Science.gov (United States)

    Kuźniar-Placek, Justyna; Szponar, Jarosław; Panasiuk, Lech

    2012-01-01

    Analgesic usage without any consultation with a physician is very common in Poland. It increases the risk of occurrence of the harmful effect or harmful interaction with other medicaments taken by the patient. The abuse of painkillers applies not only to opioid but also to nonopioid analgesics. The largest group of commonly available medicaments are NSAIDs. The most frequent undesirable effect of NSAIDs' is dyspepsia. Among the most dangerous, and very often the ones without any symptoms, are gastric and duodenum ulceration for which the bleeding and perforation may be the first manifestation. Each non steroidal anti-inflammatory drug taken in large doses can be a cause of analgesic nephropathy. Its deceitful course can delay the diagnosis leading to chronic kidney failure. A complex supplements, that include central acting substances, increase the risk of kidney damage, as well as physical and psychological addiction. NSAIDs can cause: the heart failure to be more severe, treatment resistant arterial hypertension, increase an effectiveness of anticoagulants or antidiabetic drugs. The problem is also that some medicaments are available without a prescription (acetylsalicylic acid, ibuprofen, acetaminophen), especially that they are ingredients of many complex supplements considered safe. Taking doses larger than therapeutic or simultaneously taking many supplements of the same active substance had many times led to poisoning and even death. Equally dangerous can be an abuse of tramadol, codeine and COX-2 inhibitors. Therefore, prudential prescription of NSAIDs, knowledge of risks related to therapy and informing the patients about their side effects, may decrease the number of patients abusing the analgesics which can lead to lowering the number of deaths caused by serious complications.

  12. Postoperative analgesic efficacy of intravenous dexketoprofen in lumbar disc surgery.

    Science.gov (United States)

    Yazar, Mehmet Akif; Inan, Nurten; Ceyhan, Aysegul; Sut, Esra; Dikmen, Bayazit

    2011-07-01

    We investigated the postoperative analgesic efficacy and effect on total tramadol consumption of intravenous dexketoprofen trometamol, a new nonsteroidal anti-inflammatory drug, in patients that had undergone lumbar disc surgery. Sixty patients were included in this placebo-controlled, randomized, double-blind study. General anesthesia was applied to both groups. Group D (n=30) received dexketoprofen (50 mg) intravenously 30 minutes before the end of surgery and at the postoperative 12th hour, whereas group C (n=30) received 2 mL of 0.9% NaCL intravenously at the same time points. All patients received a patient controlled analgesia device with a tramadol, 25 mg bolus, 15 minutes lockout protocol, and were followed with visual analog scale, verbal rating scale, modified Aldrete recovery scoring system, and Ramsay sedation scale in the postoperative period. There was no significant difference between the groups for demographic data, duration of surgery, mean arterial pressure, and heart rate. The time to first postoperative analgesic requirement was significantly longer in group D (151.33±81.98 min) than group C (19±5.78 min) (Pdexketoprofen was an effective analgesic for postdiscectomy pain when used alone or in addition to opioids. It is easy to administer and decreases tramadol consumption and opioid-related side effects.

  13. Preemptive analgesic effects of midazolam and diclofenac in rat model

    Directory of Open Access Journals (Sweden)

    Antigona Hasani

    2011-05-01

    Full Text Available The aim of the present study was to investigate the preemptive analgesic effects of intraperitoneally administrated midazolam and diclofenac, before acute and inflammatory induced pain in rat model.One hundred twenty-eight (n=8 in each group male Sprague Dawley rats were included in the study. Paw movements in response to thermal stimulation or paw flinching in response to formalin injection were compared after midazolam (0.1, 1, 5 and 10 mg/kg and diclofenac (10 mg/kg, intraperitoneal administration. Saline was used as a control.Preemptive analgesic effect was significant in both tests when diclofenac and midazolam was administrated before the pain stimuli (p<0.01 and p<0.001. Intraperitoneal injection of midazolam in doses 5 and 10 mg/kg, increase the response time in hot plate test and decrease the number of flinches in formalin test (p<0.01 vs. p<0.001. ED50 of midazolam (with diclofenac in hot plate test was 2.02 mg/kg (CI95% =-3.47-5.03 mg; and, 0.9 mg/kg (CI95% =-0.87-4.09 mg in phase I and 0.7 mg/kg (CI95% = 0.48-6.63 mg in phase II, in formalin test.Intraperitoneally administered midazolam and diclofenac had preemptive analgesic effects on acute thermal, and inflammatory induced pain in rats.

  14. Analgesic effects of branding in treatment of headaches.

    Science.gov (United States)

    Branthwaite, A; Cooper, P

    1981-01-01

    The effect of branding--that is, the labelling and marketing--of a well-known proprietary analgesic used to treat headaches was studied in a sample of women given a branded or unbranded form with either an inert or an active formulation. The sample was also divided according to whether the subjects were regular users of the brand or users of other brands. The findings showed that branded tablets were overall significantly more effective than unbranded tablets in relieving headaches. Differential effects were observed: the effects of branding were more noticeable one hour after the tablets were taken compared with 30 minutes; in the women given the placebo; and in the users of the brand compared with the users of other brands. It is hypothesised that these effects are due to increased confidence in obtaining relief with a well-known brand, and that branding has an analgesic effect that interacts with the analgesic effects of placebos and active ingredients. PMID:6786566

  15. Mass transfer ranking of polylysine, poly-ornithine and poly-methylene-co-guanidine microcapsule membranes using a single low molecular mass marker

    Directory of Open Access Journals (Sweden)

    Rosinski Stefan

    2003-01-01

    Full Text Available On the long way to clinical transplantable hybrid systems, comprising of cells, acting as immuno-protected bioreactors microencapsulated in a polymeric matrix and delivering desired factors (proteins, hormones, enzymes etc to the patient's body, an important step is the optimization of the microcapsule. This topic includes the selection of a proper coating membrane which could fulfil, first of all, the mass transfer as well as biocompatibility, stability and durability requirements. Three different membranes from polymerised aminoacids, formed around exactly identical alginate gel cores, were considered, concerning their mass transport properties, as potential candidates in this task. The results of the evaluation of the mass ingress and mass transfer coefficient h for the selected low molecular mass marker, vitamin B12, in poly-L-lysine (HPLL poly-L-ornithine (HPLO and poly-methylene-co-guanidine hydrochloride (HPMCG membrane alginate microcapsules demonstrate the advantage of using the mass transfer approach to a preliminary screening of various microcapsule formulations. Applying a single marker and evaluating mass transfer coefficients can help to quickly rank the investigated membranes and microcapsules according to their permeability. It has been demonstrated that HPLL, HPLO and HPMCG microcapsules differ from each other by a factor of two concerning the rate of low molecular mass marker transport. Interesting differences in mass transfer through the membrane in both directions in-out was also found, which could possibly be related to the membrane asymmetry.

  16. Microcapsules engineered to support mesenchymal stem cell (MSC) survival and proliferation enable long-term retention of MSCs in infarcted myocardium.

    Science.gov (United States)

    Blocki, Anna; Beyer, Sebastian; Dewavrin, Jean-Yves; Goralczyk, Anna; Wang, Yingting; Peh, Priscilla; Ng, Michael; Moonshi, Shehzahdi S; Vuddagiri, Susmitha; Raghunath, Michael; Martinez, Eliana C; Bhakoo, Kishore K

    2015-06-01

    The limited efficacy of cardiac cell-based therapy is thought to be due to poor cell retention within the myocardium. Hence, there is an urgent need for biomaterials that aid in long-term cell retention. This study describes the development of injectable microcapsules for the delivery of mesenchymal stem cells (MSCs) into the infarcted cardiac wall. These microcapsules comprise of low concentrations of agarose supplemented with extracellular matrix (ECM) proteins collagen and fibrin. Dextran sulfate, a negatively charged polycarbohydrate, was added to mimic glycosaminoglycans in the ECM. Cell viability assays showed that a combination of all components is necessary to support long-term survival and proliferation of MSCs within microcapsules. Following intramyocardial transplantation, microcapsules degraded slowly in vivo and did not induce a fibrotic foreign body response. Pre-labeling of encapsulated MSCs with iron oxide nanoparticles allowed continued cell-tracking by MRI over several weeks following transplantation into infarcted myocardium. In contrast, MSCs injected as cell suspension were only detectable for two days post transplantation by MRI. Histological analysis confirmed integration of transplanted cells at the infarct site. Therefore, microcapsules proved to be suitable for stem cell delivery into the infarcted myocardium and can overcome current limitations of poor cell retention in cardiac cell-based therapy. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Investigation of Genipin Cross-Linked Microcapsule for Oral Delivery of Live Bacterial Cells and Other Biotherapeutics: Preparation and In Vitro Analysis in Simulated Human Gastrointestinal Model

    Directory of Open Access Journals (Sweden)

    Hongmei Chen

    2010-01-01

    Full Text Available Oral therapy utilizing engineered microorganisms has shown promise in the treatment of many diseases. By microencapsulation, viable cells can overcome the harsh gastrointestinal (GI environment and secrete needed therapeutics into the gut. These engineered cells should be encased without escaping into the GI tract for safety concerns, thus robust microcapsule membrane is requisite. This paper examined the GI performance of a novel microcapsule membrane using a dynamic simulated human GI model. Results showed that the genipin cross-linked alginate-chitosan (GCAC microcapsules possessed strong resistance to structural disintegration in the simulated GI environment. Leakage of encapsulated high molecular weight dextran, a model material to be protected during the simulated GI transit, was negligible over 72 h of exposure, in contrast to considerable leakage of dextran from the non-cross-linked counterparts. These microcapsules did not alter the microflora and enzymatic activities in the simulated human colonic media. This study suggested the potential of the GCAC microcapsules for oral delivery of live microorganisms and other biotherapeutics.

  18. Microcapsules Containing pH-Responsive, Fluorescent Polymer-Integrated MoS2: An Effective Platform for in Situ pH Sensing and Photothermal Heating.

    Science.gov (United States)

    Park, Chan Ho; Lee, Sangmin; Pornnoppadol, Ghasidit; Nam, Yoon Sung; Kim, Shin-Hyun; Kim, Bumjoon J

    2018-03-14

    We report the design of a novel microcapsule platform for in situ pH sensing and photothermal heating, which involves the encapsulation of pH-responsive polymer-coated molybdenum disulfide (MoS 2 ) nanosheets (NSs) in microcapsules with an aqueous core and a semipermeable polymeric shell. The MoS 2 NSs were functionalized with pH-responsive polymers having fluorescent groups at the distal end to provide pH-sensitive Förster resonance energy transfer (FRET) effect. The pH-responsive polymers were carefully designed to produce a dramatic change in the polymer conformation, which translated to a change in the FRET efficiency near pH 7.0 in response to subtle pH changes, enabling the detection of cancer cells. The pH-sensitive MoS 2 NSs were microfluidically encapsulated within semipermeable membranes to yield microcapsules with a uniform size and composition. The microcapsules retained the MoS 2 NSs without leakage while allowing the diffusion of small ions and water through the membrane. At the same time, the membranes excluded adhesive proteins and lipids in the surrounding media, protecting the encapsulated MoS 2 NSs from deactivation and enabling in situ pH monitoring. Moreover, the encapsulated MoS 2 NSs showed high-performance photothermal heating, rendering the dual-functional microcapsules highly suitable for cancer diagnosis and treatment.

  19. The Influence of 1-Butanol and Trisodium Citrate Ion on Morphology and Chemical Properties of Chitosan-Based Microcapsules during Rigidification by Alkali Treatment

    Science.gov (United States)

    Chatterjee, Sudipta; Salaün, Fabien; Campagne, Christine

    2014-01-01

    Linseed oil which has various biomedical applications was encapsulated by chitosan (Chi)-based microcapsules in the development of a suitable carrier. Oil droplets formed in oil-in-water emulsion using sodium dodecyl sulfate (SDS) as emulsifier was stabilized by Chi, and microcapsules with multilayers were formed by alternate additions of SDS and Chi solutions in an emulsion through electrostatic interaction. No chemical cross-linker was used in the study and the multilayer shell membrane was formed by ionic gelation using Chi and SDS. The rigidification of the shell membrane of microcapsules was achieved by alkali treatment in the presence of a small amount of 1-butanol to reduce aggregation. A trisodium citrate solution was used to stabilize the charge of microcapsules by ionic cross-linking. Effects of butanol during alkali treatment and citrate in post alkali treatment were monitored in terms of morphology and the chemical properties of microcapsules. Various characterization techniques revealed that the aggregation was decreased and surface roughness was increased with layer formation. PMID:25474188

  20. Self-assembled gold coating enhances X-ray imaging of alginate microcapsules

    Science.gov (United States)

    Qie, Fengxiang; Astolfo, Alberto; Wickramaratna, Malsha; Behe, Martin; Evans, Margaret D. M.; Hughes, Timothy C.; Hao, Xiaojuan; Tan, Tianwei

    2015-01-01

    Therapeutic biomolecules produced from cells encapsulated within alginate microcapsules (MCs) offer a potential treatment for a number of diseases. However the fate of such MCs once implanted into the body is difficult to establish. Labelling the MCs with medical imaging contrast agents may aid their detection and give researchers the ability to track them over time thus aiding the development of such cellular therapies. Here we report the preparation of MCs with a self-assembled gold nanoparticle (AuNPs) coating which results in distinctive contrast and enables them to be readily identified using a conventional small animal X-ray micro-CT scanner. Cationic Reversible Addition-Fragmentation chain Transfer (RAFT) homopolymer modified AuNPs (PAuNPs) were coated onto the surface of negatively charged alginate MCs resulting in hybrids which possessed low cytotoxicity and high mechanical stability in vitro. As a result of their high localized Au concentration, the hybrid MCs exhibited a distinctive bright circular ring even with a low X-ray dose and rapid scanning in post-mortem imaging experiments facilitating their positive identification and potentially enabling them to be used for in vivo tracking experiments over multiple time-points.Therapeutic biomolecules produced from cells encapsulated within alginate microcapsules (MCs) offer a potential treatment for a number of diseases. However the fate of such MCs once implanted into the body is difficult to establish. Labelling the MCs with medical imaging contrast agents may aid their detection and give researchers the ability to track them over time thus aiding the development of such cellular therapies. Here we report the preparation of MCs with a self-assembled gold nanoparticle (AuNPs) coating which results in distinctive contrast and enables them to be readily identified using a conventional small animal X-ray micro-CT scanner. Cationic Reversible Addition-Fragmentation chain Transfer (RAFT) homopolymer modified Au

  1. Management of cancer pain: 1. Wider implications of orthodox analgesics

    Directory of Open Access Journals (Sweden)

    Lee SK

    2014-01-01

    Full Text Available Susannah K Lee,1 Jill Dawson,2 Jack A Lee,3 Gizem Osman,4 Maria O Levitin,5 Refika Mine Guzel,5 Mustafa BA Djamgoz5,61Pomona College, Claremont, CA, USA; 2Healthcare Communications Consultancy, Danville, CA, USA; 3College of Arts and Sciences, Vanderbilt University, Nashville, TN, USA; 4Department of Chemical Engineering, Loughborough University, Loughborough, UK; 5Division of Cell and Molecular Biology, Neuroscience Solutions to Cancer Research Group, South Kensington Campus, Imperial College London, London, UK; 6Cyprus International University, Biotechnology Research Centre, Haspolat, North Cyprus, Mersin, TurkeyAbstract: In this review, the first of two parts, we first provide an overview of the orthodox analgesics used commonly against cancer pain. Then, we examine in more detail the emerging evidence for the potential impact of analgesic use on cancer risk and disease progression. Increasing findings suggest that long-term use of nonsteroidal anti-inflammatory drugs, particularly aspirin, may reduce cancer occurrence. However, acetaminophen may raise the risk of some hematological malignancies. Drugs acting upon receptors of gamma-aminobutyric acid (GABA and GABA “mimetics” (eg, gabapentin appear generally safe for cancer patients, but there is some evidence of potential carcinogenicity. Some barbiturates appear to slightly raise cancer risks and can affect cancer cell behavior in vitro. For cannabis, studies suggest an increased risk of squamous cell carcinoma of the tongue, larynx, and possibly lung. Morphine may stimulate human microvascular endothelial cell proliferation and angiogenesis; it is not clear whether this might cause harm or produce benefit. The opioid, fentanyl, may promote growth in some tumor cell lines. Opium itself is an emerging risk factor for gastric adenocarcinoma and possibly cancers of the esophagus, bladder, larynx, and lung. It is concluded that analgesics currently prescribed for cancer pain can

  2. Light-responsive polymer microcapsules as delivery systems for natural active agents

    Energy Technology Data Exchange (ETDEWEB)

    Bizzarro, Valentina; Carfagna, Cosimo; Cerruti, Pierfrancesco [Institute for Polymers, Composites and Biomaterials (IPCB-CNR), Via Campi Flegrei, 34, 80078 Pozzuoli, NA (Italy); Marturano, Valentina; Ambrogi, Veronica [Department of Chemical, Materials and Production Engineering (DICMAPI), University of Naples “Federico II”, P. le Tecchio, 80, 80125 Napoli (Italy); Institute for Polymers, Composites and Biomaterials (IPCB-CNR), Via Campi Flegrei, 34, 80078 Pozzuoli, NA (Italy)

    2016-05-18

    In this work we report the preparation and the release behavior of UV-responsive polymeric microcapsules containing essential oils as a core. The oil acted also as a monomer solvent during polymerization. Accordingly, the potentially toxic organic solvent traditionally used was replaced with a natural active substance, resulting in a more sustainable functional system. Polymer shell was based on a lightly cross-linked polyamide containing UV-sensitive azobenzene moieties in the main chain. The micro-sized capsules were obtained via interfacial polycondensation in o/w emulsion, and their mean size was measured via Dynamic Light Scattering. Shape and morphology were analyzed through Scanning Electron and Optical Microscopy. UV-responsive behavior was evaluated via spectrofluorimetry, by assessing the release kinetics of a fluorescent probe molecule upon UV light irradiation (λ{sub max}=360 nm). The irradiated samples showed an increase in fluorescence intensity, in accordance with the increase of the probe molecule concentration in the release medium. As for the un-irradiated sample, no changes could be detected demonstrating the effectiveness of the obtained releasing system.

  3. Preparation of microcapsules by complex coacervation of gum Arabic and chitosan.

    Science.gov (United States)

    Butstraen, Chloé; Salaün, Fabien

    2014-01-01

    Gum Arabic-chitosan microcapsules containing a commercially available blend of triglycerides (Miglyol 812 N) as core phase were synthesized by complex coacervation. This study was conducted to clarify the influence of different parameters on the encapsulation process, i.e. during the emulsion formation steps and during the shell formation, using conductometry, zeta potential, surface and interface tension measurement and Fourier-transform infrared spectroscopy. By carefully analyzing the influencing factors including phase volume ratio, stirring rate and time, pH, reaction time, biopolymer ratio and crosslinking effect, the optimum synthetic conditions were found out. For the emulsion step, the optimum phase volume ratio chosen was 0.10 and an emulsion time of 15 min at 11,000 rpm was selected. The results also indicated that the optimum formation of these complexes appears at a pH value of 3.6 and a weight ratio of chitosan to gum Arabic mixtures of 0.25. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. UV irradiation-initiated MMA polymerization to prepare microcapsules containing phase change paraffin

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Sude; Song, Guolin; Li, Wei; Fan, Pengfei; Tang, Guoyi [Institute of Advanced Materials, Graduated School at Shenzhen, Tsinghua University, Shenzhen 518055 (China)

    2010-10-15

    Microencapsulated phase change material (MEPCM), paraffin, with polymethylmethacrylate shell was prepared by introducing UV irradiation to an O/W emulsion polymerization for approximately 30 min under constant stirring. The results of differential scanning calorimetry analyses indicate that the latent heat and the content of paraffin of microcapsules are 101 J g{sup -1} and 61.2 wt%, respectively. The phase transition temperature of MEPCM ranges from 24 to 33 C. The MEPCM was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Thermal gravimetric analysis results show that the MEPCM is degraded into two distinguishable steps. Accelerated thermal cycling tests also indicate that the MEPCM displays a good thermal reliability. Gypsum boards composed of as-prepared MEPCM show a good temperature-regulated property. Based on all these results, it can be concluded that the microencapsulated paraffin as MEPCMs have good potential for thermal energy storage purposes such as phase change material slurries, solar space heating applications, textiles and building materials. (author)

  5. The microcapsule-type formaldehyde scavenger: the preparation and the application in urea-formaldehyde adhesives.

    Science.gov (United States)

    Duan, Hongyun; Qiu, Teng; Guo, Longhai; Ye, Jun; Li, Xiaoyu

    2015-08-15

    The limitation and regulation of formaldehyde emissions (FE) now shows great importance in wood-based materials such as plywood and particle board manufactured for building and furnishing materials. The widely used formaldehyde-based adhesives are one of the main sources of FE from the wood products. In this work, a new kind of long-term effective formaldehyde scavenger in the microcapsule form was prepared by using an intra-liquid desiccation method. The characterizations of the capsule (UC) were performed including the morphologies, the yields, the loading efficiency as well as its sustained-release of urea in aqueous conditions. The prepared UC could be integrated in urea-formaldehyde resins by simply physical blending, and the mixtures were available to be applied as the adhesives for the manufacture of plywood. The bonding strength (BS) and the FE of the bonded plywood in both short (3h) and long (12 week) period were evaluated in detail. It was found that the FE profile of the plywood behaved following a duple exponential law within 12 week. The addition of UC in the adhesive can effectively depress the FE of the plywood not only in a short period after preparation but also in a long-term period during its practical application. The slow released urea would continuously suppress the emission of toxic formaldehyde in a sustained manner without obviously deteriorating on the BS of the adhesives. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Physical properties of compressive knits compound with different matters impregnated by microcapsules moisturizing

    Directory of Open Access Journals (Sweden)

    Fadhel Jaâfar

    2011-01-01

    Full Text Available The compressive knits include a very varied group of different device functions, from the more merely (protection to the more developed (scars improvement, skin hydration…. We combined two therapy forms the pressure and the hydration of burned skin. We essayed to reunite the advantages of two techniques pressure and hydration in only one and the same instrument in the form of compressive knit with microencapsulated surface. The compressive knits are elaborated with different textile matters such us Cotton/Spandex, Polyester/Spandex, Polyamide/Spandex, Viscose/Spandex and Cotton/Polyester/Spandex. The hydration product chosen in this application is the Jojoba Oil. The microcapsules were prepared according to the Phase Separation Method. The physical properties such us the Pressure, the Mass per Area, the Thickness, the Air Permeability and the Adiathermic Power are tested. According to the results, we conclude that the knits are compressive, comfort, smooth, no allergen, thinness and washable. The raw materials selected for the samples studied are biocompatible with human skin.

  7. Controlled release of Lactobacillus rhamnosus biofilm probiotics from alginate-locust bean gum microcapsules.

    Science.gov (United States)

    Cheow, Wean Sin; Kiew, Tie Yi; Hadinoto, Kunn

    2014-03-15

    Chitosan-coated alginate microcapsules containing high-density biofilm Lactobacillus rhamnosus have been previously shown to exhibit higher freeze drying- and thermal-tolerance than their planktonic counterparts. However, their cell release profile remains poor due to the capsules' susceptibility to the gastric environment. Herein the effects of adding locust bean (LB) and xanthan (XT) gums to alginate (AGN) capsules on the stress tolerance and cell release profiles in simulated gastrointestinal fluids are investigated. Compared to the AGN-only capsules, the AGN-LB capsules exhibit improved stress tolerance (i.e. ≈ 6x for freeze drying, 100x for thermotolerance, 10x for acid), whereas the AGN-XT capsules only improve the acid tolerance. Importantly, the AGN-LB capsules possess the optimal cell release profile with a majority of cells released in the simulated intestinal juice than in the gastric juice. The AGN-LB capsules' superiority is attributed to their stronger interaction with the chitosan coating and high swelling capacity, thus delaying their bulk dissolution. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Physicochemical and Sensory Properties of Appenzeller Cheese Supplemented with Powdered Microcapsule of Tomato Extract during Ripening

    Science.gov (United States)

    Kwak, Hae-Soo; Chimed, Chogsom; Yoo, Sang-Hun

    2016-01-01

    The objective of this study was to determine the physicochemical and sensory properties of Appenzeller cheese supplemented with different concentrations (0, 1, 2, 3, and 4%, w/w) of powdered microcapsules of tomato extracts (PMT) during ripening at 14℃ for 6 mon. The particle sizes of PMT ranged from 1 to 10 m diameter with an average particle size of approximately 2 m. Butyric acid (C4) concentrations of PMT-added Appenzeller cheese were significantly higher than that of the control. Lactic acid bacteria counts in the cheese were not significantly influenced by ripening time from 0 to 6 mon or the concentrations (0-4%, w/w) of PMT. In terms of texture, the hardness of PMT-added Appenzeller cheese was significantly increased compared to the control. The gumminess and chewiness of PMT-added Appenzeller cheese were similar to those of the control. However, both cohesiveness and springiness of PMT-added Appenzeller cheese were slightly decreased. In sensory analysis, bitterness and sourness of Appenzeller cheese were not significantly changed after supplementation of PMT, but sweetness of the cheese was significantly increased after increasing the ripening time from 0 to 6 mon and increasing the concentration from 1 to 4% (w/w). Based on these results, the addition of the concentrations (1-4%, w/w) of PMT to Appenzeller cheese can be used to develop functional Appenzeller cheese. PMID:27194934

  9. Eucalyptus oil-loaded microcapsules grafted to cotton fabrics for acaricidal effect against Dermatophagoides farinae.

    Science.gov (United States)

    Kim, Joo Ran

    2017-05-01

    The purpose of this study was to develop acaricidal cotton fabrics grafted with eucalyptus oil-loaded microcapsules (EOMCs) produced from green resources. EOMCs showed a broad size distribution between 0.5 and 6.5 μm, and had the average diameter 1.8 μm. EOMCs exhibited nonporous spherical shapes and individually remained on cotton fibres. Through AATCC mortality tests against house dust mites (HDMs) (Dermatophagoides farinae), the treated cotton fabric containing EOMCs resulted in 98.7% mortality. Acaricidal efficiency was due to the large amount of oxygenated monoterpene, 1,8-eucalyptol (75.8%) and hydroxylated monoterpenes such as α-terpineol (3.6%), terpinen-4-ol (0.4%) and linalool (0.3%) found in eucalyptus oil. These compounds are effective in enhancing penetration into HDMs. EOMCs produced from safe and natural sources can serve as a replacement for synthetic acaricides in controlling the population of HDM, leading to positive impacts on the human health and environment.

  10. Microcapsule Technology for Controlled Growth Factor Release in Musculoskeletal Tissue Engineering.

    Science.gov (United States)

    Della Porta, Giovanna; Ciardulli, Maria C; Maffulli, Nicola

    2018-06-01

    Tissue engineering strategies have relied on engineered 3-dimensional (3D) scaffolds to provide architectural templates that can mimic the native cell environment. Among the several technologies proposed for the fabrication of 3D scaffold, that can be attractive for stem cell cultivation and differentiation, moulding or bioplotting of hydrogels allow the stratification of layers loaded with cells and with specific additives to obtain a predefined microstructural organization. Particularly with bioplotting technology, living cells, named bio-ink, and additives, such as biopolymer microdevices/nanodevices for the controlled delivery of growth factors or biosignals, can be organized spatially into a predesigned 3D pattern by automated fabrication with computer-aided digital files. The technologies for biopolymer microcarrier/nanocarrier fabrication can be strategic to provide a controlled spatiotemporal delivery of specific biosignals within a microenvironment that can better or faster address the stem cells loaded within it. In this review, some examples of growth factor-controlled delivery by biopolymer microdevices/nanodevices embedded within 3D hydrogel scaffolds will be described, to achieve a bioengineered 3D interactive microenvironment for stem cell differentiation. Conventional and recently proposed technologies for biopolymer microcapsule fabrication for controlled delivery over several days will also be illustrated and critically discussed.

  11. Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus.

    Science.gov (United States)

    Lopes, Susiany; Bueno, Luciano; Aguiar, Francisco DE; Finkler, Christine

    2017-01-01

    This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

  12. Plasma-assisted deposition of microcapsule containing Aloe vera extract for cosmeto-textiles

    Science.gov (United States)

    Nascimento do Carmo, S.; Zille, A.; Souto, A. P.

    2017-10-01

    Dielectric Barrier Discharge (DBD) atmospheric-pressure plasma was employed to enhance the deposition of commercial microcapsules (MCs) containing Aloe vera extract onto a cotton/polyester (50:50) fabric. DBD conditions were optimized in term of energy dosage and contact angle. The MCs were applied by padding and printing methods and the coatings were characterized in terms of SEM and FTIR. MCs display a spherical shape with size between 2 and 8 μm with an average wall thickness of 0.5 μm. The MCs applied by printing and pretreated with a plasma dosage of 1.6 kW m2 min-1 showed the best results with an increased adhesion of 200% and significant penetration of MCs into the fibres network. Plasma printed fabric retained 230% more MCs than untreated fabric after 10 washing cycles. However, the coating resistance between unwashed and washed samples was only improved by 5%. Considering the fact that no binder or crosslinking agents were used, the DBD plasma-assisted deposition of MCs revealed to be a promising environmental safe and low cost coating technology.

  13. Improved Bioavailability of Levodopa Using Floatable Spray-Coated Microcapsules for the Management of Parkinson's Disease.

    Science.gov (United States)

    Baek, Jong-Suep; Tee, Jie Kai; Pang, Yi Yun; Tan, Ern Yu; Lim, Kah Leong; Ho, Han Kiat; Loo, Say Chye Joachim

    2018-06-01

    Oral administration of levodopa (LD) is the gold standard in managing Parkinson's disease (PD). Although LD is the most effective drug in treating PD, chronic administration of LD induces levodopa-induced dyskinesia. A continuous and sustained provision of LD to the brain could, therefore, reduce peak-dose dyskinesia. In commercial oral formulations, LD is co-administrated with an AADC inhibitor (carbidopa) and a COMT inhibitor (entacapone) to enhance its bioavailability. Nevertheless, patients are known to take up to five tablets a day because of poor sustained-releasing capabilities that lead to fluctuations in plasma concentrations. To achieve a prolonged release of LD with the aim of improving its bioavailability, floatable spray-coated microcapsules containing all three PD drugs were developed. This gastro-retentive delivery system showed sustained release of all PD drugs, at similar release kinetics. Pharmacokinetics study was conducted and this newly developed formulation showed a more plateaued delivery of LD that is void of the plasma concentration fluctuations observed for the control (commercial formulation). At the same time, measurements of LD and dopamine of mice administered with this formulation showed enhanced bioavailability of LD. This study highlights a floatable, sustained-releasing delivery system in achieving improved pharmacokinetics data compared to a commercial formulation.

  14. INFLUENCE OF THE SHELL MATERIAL IN THE MICROCAPSULES FORMATION BY SPRAY DRYING

    Directory of Open Access Journals (Sweden)

    FERRÁNDIZ Marcela

    2015-05-01

    Full Text Available Microencapsulation is a process of entrapment, packaging or immobilizing an active (core material, which can be in the state of solid, liquid or gas, within a more stable, protective secondary (wall material that can be released at controlled rates under specific conditions. There are several microencapsulation techniques such as: spray drying, spray cooling/chilling, freeze drying, extrusion, fluidized bed coating, coacervation, liposome entrapment, coextrusion, interfacial polymerization, radical polymerization, molecular inclusion in cyclodextrins, etc. Spray drying has been commonly applied due to their simplicity process, wide availability of equipment facilities, significant merits in terms of reductions in product volume, easy of handling, etc. In the spray drying process the wall materials (shells and their properties are parameters to be considered to achieve proper encapsulation of the active ingredients (core materials. Some commonly used wall materials and their properties related to spray drying encapsulation, including proteins, carbohydrates, and other materials, or mixtures of some of them. Proper encapsulation of the active ingredient (core is essential to achieve this active material protecting the outer. The aim of this work is encapsulated an essential oil, sage oil, using two differet wall materials in order to determine which is the best wall material. Scanning electron microscopy (SEM has been used in order to know the microcapsules morphology. Core, Shell, Gum Arabic, Alginate, Sage oil, Scanning Electron Microscopy (SEM

  15. Carrier-inside-carrier: polyelectrolyte microcapsules as reservoir for drug-loaded liposomes.

    Science.gov (United States)

    Maniti, Ofelia; Rebaud, Samuel; Sarkis, Joe; Jia, Yi; Zhao, Jie; Marcillat, Olivier; Granjon, Thierry; Blum, Loïc; Li, Junbai; Girard-Egrot, Agnès

    2015-01-01

    Conventional liposomes have a short life-time in blood, unless they are protected by a polymer envelope, most often polyethylene glycol. However, these stabilizing polymers frequently interfere with cellular uptake, impede liposome-membrane fusion and inhibit escape of liposome content from endosomes. To overcome such drawbacks, polymer-based systems as carriers for liposomes are currently developed. Conforming to this approach, we propose a new and convenient method for embedding small size liposomes, 30-100 nm, inside porous calcium carbonate microparticles. These microparticles served as templates for deposition of various polyelectrolytes to form a protective shell. The carbonate particles were then dissolved to yield hollow polyelectrolyte microcapsules. The main advantage of using this method for liposome encapsulation is that carbonate particles can serve as a sacrificial template for deposition of virtually any polyelectrolyte. By carefully choosing the shell composition, bioavailability of the liposomes and of the encapsulated drug can be modulated to respond to biological requirements and to improve drug delivery to the cytoplasm and avoid endosomal escape.

  16. Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus

    Directory of Open Access Journals (Sweden)

    SUSIANY LOPES

    2017-08-01

    Full Text Available ABSTRACT This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM, moisture content, Fourier Transform Infrared Spectrometry (FTIR, thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

  17. Pharmacokinetics of Sustained-Release Analgesics in Mice

    Science.gov (United States)

    Kendall, Lon V; Hansen, Ryan J; Dorsey, Kathryn; Kang, Sooah; Lunghofer, Paul J; Gustafson, Daniel L

    2014-01-01

    Buprenorphine and carprofen, 2 of the most commonly used analgesics in mice, must be administered every 8 to 12 h to provide sustained analgesia. Sustained-release (SR) formulations of analgesics maintain plasma levels that should be sufficient to provide sustained analgesia yet require less frequent dosing and thus less handling of and stress to the animals. The pharmacokinetics of SR formulations of buprenorphine (Bup-SR), butorphanol (Butp-SR), fentanyl (Fent-SR), carprofen (Carp-SR), and meloxicam (Melox-SR) were evaluated in mice over 72 h and compared with those of traditional, nonSR formulations. Bup-SR provided plasma drug levels greater than the therapeutic level for the first 24 to 48 h after administration, but plasma levels of Bup-HCl fell below the therapeutic level by 4 h. Fent-SR maintained plasma levels greater than reported therapeutic levels for 12 h. Therapeutic levels of the remaining drugs are unknown, but Carp-SR provided plasma drug levels similar to those of Carp for the first 24 h after administration, whereas Melox-SR had greater plasma levels than did Melox for the first 8 h. Butp-SR provided detectable plasma drug levels for the first 24 h, with a dramatic decrease over the first 4 h. These results indicate that Bup-SR provides a stable plasma drug level adequate for analgesia for 24 to 48 h after administration, whereas Carp-SR, Melox-SR, Fent-SR, and Butp-SR would require additional doses to provide analgesic plasma levels beyond 24 h in mice. PMID:25255070

  18. Coffee drinking enhances the analgesic effect of cigarette smoking

    DEFF Research Database (Denmark)

    Nastase, Anca; Ioan, Silvia; Braga, Radu I

    2007-01-01

    Nicotine (from cigarette smoke) and caffeine (from coffee) have analgesic effects in humans and experimental animals. We investigated the combined effects of coffee drinking and cigarette smoking on pain experience in a group of moderate nicotine-dependent, coffee drinking, young smokers. Pain...... threshold and pain tolerance were measured during cold pressor test following the habitual nocturnal deprivation of smoking and coffee drinking. Smoking increased pain threshold and pain tolerance in both men and women. Coffee drinking, at a dose that had no independent effect, doubled the increase in pain...

  19. Preclinical Science Regarding Cannabinoids as Analgesics: An Overview

    Directory of Open Access Journals (Sweden)

    ME Lynch

    2005-01-01

    Full Text Available Modern pharmacology of cannabinoids began in 1964 with the isolation and partial synthesis of delta-9-tetrahydrocannabinol, the main psychoactive agent in herbal cannabis. Since then, potent antinociceptive and antihyperalgesic effects of cannabinoid agonists in animal models of acute and chronic pain; the presence of cannabinoid receptors in pain-processing areas of the brain, spinal cord and periphery; and evidence supporting endogenous modulation of pain systems by cannabinoids has provided support that cannabinoids exhibit significant potential as analgesics. The present article presents an overview of the preclinical science.

  20. SEDATIVE AND ANALGESIC EFFECTS OF DETOMIDINE HYDROCHLORIDE IN GOATS

    OpenAIRE

    A. N. Tunio., A. B. Kalhoro and I.H. Kathio1

    2003-01-01

    The sedative and analgesic effects of three dose rates of detomidine (40, 50 and 60µg/kg body weight) were studied in six goats. Moderate to deep sedation occurred after administration of 40µg/kg of detomidine as compared to deep sedation produced by 50 and 60µg/kg of detomidine. The degree, onset and duration of sedation and onset and duration of maximum sedation were all dose dependent. Skin analgesia and recumbency were produced in all animals with higher doses (50 and 60µg/kg) and in thre...

  1. Antioxidant, antimicrobial, cytotoxic and analgesic activities of ethanolic extract of Mentha arvensis L.

    Directory of Open Access Journals (Sweden)

    Nripendra Nath Biswas

    2014-10-01

    Conclusions: These results suggest that the ethanolic extract of Mentha arvensis L. has potential antioxidant, antibacterial, cytotoxic and analgesic activities that support the ethnopharmacological uses of this plant.

  2. Dental therapeutic practice patterns in the U.S. II. Analgesics, corticosteroids, and antibiotics.

    Science.gov (United States)

    Moore, Paul A; Nahouraii, Helen S; Zovko, Jayme G; Wisniewski, Stephen R

    2006-01-01

    This article examines the prescribing practices for peripherally acting and centrally acting analgesics, corticosteroids, and antibiotics following third molar extraction. A nationwide survey involving the prescribing patterns of a random national sample of 850 practicing oral surgeons was performed in 2004. Ibuprofen was the peripherally acting analgesic respondents used most frequently in the previous month, selected by 73.5% of the respondents. The ibuprofen dose prescribed most frequently was 800 mg, followed by doses of 600 mg and 400 mg. The centrally acting analgesic prescribed most frequently was the combination formulation of hydrocodone with acetaminophen, selected by 64.0% of the respondents. Recommendations for oral analgesics to manage postoperative pain relied on the peripherally acting analgesic ibuprofen or the centrally acting analgesic combination formulation hydrocodone with acetaminophen. Routine instructions to use centrally acting analgesics "as needed for pain" suggest that centrally acting analgesics are offered to manage pain that postoperative peripherally acting analgesics and intraoperative long-acting local anesthetics do not control adequately. The frequency with which oral and maxillofacial surgeons administered antibiotics and corticosteroids varied widely based on perceived patient need and dentist expectations.

  3. Analgesic use in patients with knee and/or hip osteoarthritis referred to an outpatient center

    DEFF Research Database (Denmark)

    Knoop, Jesper; van Tunen, Joyce; van der Esch, Martin

    2017-01-01

    Although analgesics are widely recommended in current guidelines, underuse and inadequate prescription of analgesics seem to result in suboptimal treatment effects in patients with knee and/or hip osteoarthritis (OA). This study aimed (i) to describe the use of analgesics; and (ii) to determine...... factors that are related to analgesic use in patients with knee and/or hip OA referred to an outpatient center. A cross-sectional study with data from 656 patients with knee and/or hip OA referred to an outpatient center (Amsterdam Osteoarthritis (AMS-OA) cohort) was conducted. Self-reported use...

  4. Analgesic exposure in pregnant rats affects fetal germ cell development with inter-generational reproductive consequences

    DEFF Research Database (Denmark)

    Dean, Afshan; van den Driesche, Sander; Wang, Yili

    2016-01-01

    Analgesics which affect prostaglandin (PG) pathways are used by most pregnant women. As germ cells (GC) undergo developmental and epigenetic changes in fetal life and are PG targets, we investigated if exposure of pregnant rats to analgesics (indomethacin or acetaminophen) affected GC development...... smaller ovaries and reduced follicle numbers during puberty/adulthood; as similar changes were found for F2 offspring of analgesic-exposed F1 fathers or mothers, we interpret this as potentially indicating an analgesic-induced change to GC in F1. Assuming our results are translatable to humans, they raise...

  5. Modulating the nanorods protrusion from poly(allylamine hydrochloride)-g-pyrene microcapsules by 1-pyrenesulfonic acid sodium salt.

    Science.gov (United States)

    Guan, Erjia; Wang, Tianxiang; Wang, Zhipeng; Gao, Changyou

    2013-09-01

    It was found previously that the Schiff base bonds in poly(allylamine hydrochloride)-g-pyrene (PAH-Py) microcapsules (MCs) are hydrolyzed at pH 2 within 1 h, leading to disassembly of the MCs and protrusion of pyrene aldehyde (Py) nanorods (NRs) on the capsule surface. Herein, we found a new way to modulate the protrusion of NRs by addition of 1-pyrenesulfonic acid sodium salt (PySO3Na). Along with the increase in PySO3Na to Py molar ratio in the MCs solution, the protrusion of NRs was progressively blocked and even inhibited at a ratio of 2.3, and at this condition, the microcapsules were stable under pH 2 for 24 h. After the composite microcapsules with excess PySO3Na were washed with a pH 10 solution and then incubated in a pH 2 solution, the NRs could be protruded from the MCs again. The fluorescence peak position of the PAH-Py/PySO3Na MCs gradually red-shifted with a decrease in pH value, and a sharp transition occurred at p H3.6, demonstrating the formation of pyrene excimers between the PySO3Na small molecules and the pendant Py groups on the PAH chain. The formed excimers take the role of blocking the self-assembly of cleaved Py molecules instead of inhibiting the hydrolysis of the Schiff base, whereas the MCs were stabilized by the charge interaction between PySO3Na and PAH backbone and the hydrophobic interaction between the pyrene rings. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Evaluation of the Analgesic Efficacy of Dexketoprofen Added to Paracetamol.

    Science.gov (United States)

    Ceyhan, Dilek; Bilir, Ayten; Güleç, Mehmet Sacit

    2016-12-01

    Multimodal analgesic methods are preferred for the treatment of postoperative pain; as a result, the additive effects of analgesics are provided while probable side effects are avoided. The current study aimed to compare the effects of the combination of dexketoprofen and paracetamol with regard to postoperative pain therapy. Ninety-six patients who underwent non-malignant gynaecological laparotomy operations were included in this study. Patients were randomized into 3 groups. Group D received 50 mg intravenous dexketoprofen 15 minutes before the end of the operation and 8 and 16 hours after the operation. Group P received 1 g intravenous paracetamol and Group DP received the combination of 500 mg paracetamol and 25 mg dexketoprofen at the same time intervals. All patients received morphine infusion after operation. Total morphine consumption at 24 hours, visual analog scale, patient satisfaction and side effects were investigated. Comparison of the visual analog scale scores revealed that the Group DP presented lower scores at 24th hours compared to the other groups; and the difference between Group DP and Group D was statistically significant. Total morphine consumption was not significantly different between the three groups. The minimum number of side effects was observed in the Group DP. Co-administration of paracetamol, dexketoprofen and morphine provided good analgesia and fewer side effects in gynaecological abdominal surgery.

  7. Analgesic Effect of Tramadol and Buprenorphin in Continuous Propofol Anaesthesia

    Directory of Open Access Journals (Sweden)

    Capík I.

    2016-03-01

    Full Text Available The objective of this study was to compare in clinical patients the analgesic effect of the centrally acting analgesics tramadol and buprenorphine in continuous intravenous anaesthesia (TIVA with propofol. Twenty dogs undergoing prophylactic dental treatment, aged 2−7 years, weighing 6−27 kg, were included in ASA I. and II. groups. Two groups of dogs received intravenous (IV administration of tramadol hydrochloride (2 mg.kg−1 or buprenorphine hydrochloride (0.2 mg.kg−1 30 minutes prior to sedation, provided by midazolam hydrochloride (0.3 mg.kg−1 and xylazine hydrochloride (0.5 mg.kg-1 IV. General anaesthesia was induced by propofol (2 mg.kg−1 and maintained by a 120 minutes propofol infusion (0.2 mg.kg−1min−1. Oscilometric arterial blood pressure (ABP measured in mm Hg, heart rate (HR, respiratory rate (RR, SAT, body temperature (BT and pain reaction elicited by haemostat forceps pressure at the digit were recorded in ten minute intervals. The tramadol group of dogs showed significantly better parameters of blood pressure (P < 0.001, lower tendency to bradycardia (P < 0.05, and better respiratory rate (P < 0.001 without negative influence to oxygen saturation. Statistically better analgesia was achieved in the tramadol group (P < 0.001. Tramadol, in comparison with buprenorphine provided significantly better results with respect to the degree of analgesia, as well as the tendency of complications arising during anaesthesia.

  8. Analgesics use in competitive triathletes: its relationship to doping and on predicting its usage.

    Science.gov (United States)

    Dietz, Pavel; Dalaker, Robert; Letzel, Stephan; Ulrich, Rolf; Simon, Perikles

    2016-10-01

    The two major objectives of this study were (i) to assess variables that predict the use of analgesics in competitive athletes and (ii) to test whether the use of analgesics is associated with the use of doping. A questionnaire primarily addressing the use of analgesics and doping was distributed among 2,997 triathletes. Binary logistic regression analysis was performed to predict the use of analgesics. Moreover, the randomised response technique (RRT) was used to estimate the prevalence of doping in order to assess whether users of analgesics have a higher potential risk for doping than non-users. Statistical power analyses were performed to determine sample size. The bootstrap method was used to assess the statistical significance of the prevalence difference for doping between users and non-users of analgesics. Four variables from a pool of 16 variables were identified that predict the use of analgesics. These were: "version of questionnaire (English)", "gender (female)", "behaviour in case of pain (continue training)", and "hours of training per week (>12 h/week)". The 12-month prevalence estimate for the use of doping substances (overall estimate 13.0%) was significantly higher in athletes that used analgesics (20.4%) than in those athletes who did not use analgesics (12.4%). The results of this study revealed that athletes who use analgesics prior to competition may be especially prone to using doping substances. The predictors of analgesic use found in the study may be of importance to prepare education material and prevention models against the misuse of drugs in athletes.

  9. Bottlenecks in the development of topical analgesics: molecule, formulation, dose-finding, and phase III design

    Directory of Open Access Journals (Sweden)

    Keppel Hesselink JM

    2017-03-01

    Full Text Available Jan M Keppel Hesselink,1 David J Kopsky,2 Stephen M Stahl3 1Institute Neuropathic Pain, Bosch en Duin, the Netherlands; 2Institute Neuropathic Pain, Amsterdam, the Netherlands; 3University of California San Diego, La Jolla, CA, USA Abstract: Topical analgesics can be defined as topical formulations containing analgesics or co-analgesics. Since 2000, interest in such formulations has been on the rise. There are, however, four critical issues in the research and development phases of topical analgesics: 1 The selection of the active pharmaceutical ingredient. Analgesics and co-analgesics differ greatly in their mechanism of action, and it is required to find the most optimal fit between such mechanisms of action and the pathogenesis of the targeted (neuropathic pain. 2 Issues concerning the optimized formulation. For relevant clinical efficacy, specific characteristics for the selected vehicle (eg, cream base or gel base are required, depending on the physicochemical characteristics of the active pharmaceutical ingredient(s to be delivered. 3 Well-designed phase II dose-finding studies are required, and, unfortunately, such trials are missing. In fact, we will demonstrate that underdosing is one of the major hurdles to detect meaningful and statistically relevant clinical effects of topical analgesics. 4 Selection of clinical end points and innovatively designed phase III trials. End point selection can make or break a trial. For instance, to include numbness together with tingling as a composite end point for neuropathic pain seems stretching the therapeutic impact of an analgesic too far. Given the fast onset of action of topical analgesics (usually within 30 minutes, enrichment designs might enhance the chances for success, as the placebo response might decrease. Topical analgesics may become promising inroads for the treatment of neuropathic pain, once sufficient attention is given to these four key aspects. Keywords: topical, analgesics

  10. Microparticles, microcapsules and microspheres: A review of recent developments and prospects for oral delivery of insulin.

    Science.gov (United States)

    Wong, Chun Y; Al-Salami, Hani; Dass, Crispin R

    2018-02-15

    Diabetes mellitus is a chronic metabolic health disease affecting the homeostasis of blood sugar levels. However, subcutaneous injection of insulin can lead to patient non-compliance, discomfort, pain and local infection. Sub-micron sized drug delivery systems have gained attention in oral delivery of insulin for diabetes treatment. In most of the recent literature, the terms "microparticles" and "nanoparticle" refer to particles where the dimensions of the particle are measured in micrometers and nanometers respectively. For instance, insulin-loaded particles are defined as microparticles with size larger than 1 μm by most of the research groups. The size difference between nanoparticles and microparticles proffers numerous effects on the drug loading efficiency, aggregation, permeability across the biological membranes, cell entry and tissue retention. For instance, microparticulate drug delivery systems have demonstrated a number of advantages including protective effect against enzymatic degradation, enhancement of peptide stability, site-specific and controlled drug release. Compared to nanoparticulate drug delivery systems, microparticulate formulations can facilitate oral absorption of insulin by paracellular, transcellular and lymphatic routes. In this article, we review the current status of microparticles, microcapsules and microspheres for oral administration of insulin. A number of novel techniques including layer-by-layer coating, self-polymerisation of shell, nanocomposite microparticulate drug delivery system seem to be promising for enhancing the oral bioavailability of insulin. This review draws several conclusions for future directions and challenges to be addressed for optimising the properties of microparticulate drug formulations and enhancing their hypoglycaemic effects. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Contrast ultrasound-guided photothermal therapy using gold nanoshelled microcapsules in breast cancer

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shumin [Department of Ultrasonography, Peking University Third Hospital, Beijing 100083 (China); Ordos Center Hospital, Ordos, Inner Mongolia 017000 (China); Dai, Zhifei [Department of Biomedical Engineering, College of Engineering, Peking University, Beijing 100871 (China); Ke, Hengte [Nanomedicine and Biosensor Laboratory, School of Life Science and Technology, Harbin Institute of Technology, Harbin 150001 (China); Qu, Enze [Department of Ultrasonography, Peking University Third Hospital, Beijing 100083 (China); Qi, Xiaoxu; Zhang, Kuo [Department of Laboratory Animal Science, Peking University Health Science Center, Beijing 100019 (China); Wang, Jinrui, E-mail: jinrui_wang@sina.com [Department of Ultrasonography, Peking University Third Hospital, Beijing 100083 (China)

    2014-01-15

    Objectives: The purpose of this study was to test whether dual functional gold nano-shelled microcapsules (GNS-MCs) can be used as an ultrasound imaging enhancer and as an optical absorber for photothermal therapy (PTT) in a rodent model of breast cancer. Methods: GNS-MCs were fabricated with an inner air and outer gold nanoshell spherical structure. Photothermal cytotoxicity of GNS-MCs was tested with BT474 cancer cells in vitro and non-obese diabetes-SCID (NOD/SCID) mice with breast cancer. GNS-MCs were injected into the tumor under ultrasound guidance and treated with near-infrared (NIR) laser irradiation. The photothermal ablative effectiveness of GNS-MCs was evaluated by measuring the surface and internal temperature of the tumor as well as the size of the tumor using histological confirmation. Results: NIR laser irradiation resulted in significant tumor cell death in GNS-MCs-treated BT474 cells in vitro. GNS-MCs were able to serve as an ultrasound enhancer to guide the intratumoral injection of GNS-MCs and ensure their uniform distribution. In vivo studies revealed that NIR laser irradiation increased the intratumoral temperature to nearly 70 °C for 8 min in GNS-MCs-treated mice. Tumor volumes decreased gradually and tumors were completely ablated in 6 out of 7 mice treated with GNS-MCs and laser irradiation by 17 days after treatment. Conclusion: This study demonstrates that ultrasound-guided PTT with theranostic GNS-MCs is a promising technique for in situ treatment of breast cancer.

  12. The permeability of EUDRAGIT RL and HEMA-MMA microcapsules to glucose and inulin.

    Science.gov (United States)

    Douglas, J A; Sefton, M V

    1990-10-05

    Measurement of the rate of glucose diffusion from EUDGRAGIT RL and HEMA-MMA microcapsules coupled with a Thiele modulus/Biot number analysis of the glucose utilization rate suggests that pancreatic islets and CHO (Chinese hamster ovary) cells (at moderate to high cell densities) should not be adversely affected by the diffusion restrictions associated with these capsule membranes. The mass transfer coefficients for glucose at 20 degrees C were of the same order of magnitude for both capsules, based on release measurements: approximately 5 x 10(-6) cm/s for EUDRAGIT RL and approximately 2 x 10(-6) for HEMA-MMA. Inulin release from EUDRAGIT RL was slower than for glucose (mass transfer coefficient 14 +/- 4 x 10(-8) cm/s). The Thiele moduli were much less than 1, either for a single islet at the center of a capsule or CHO cells uniformly distributed throughout a capsule at 10(-6) cells/ mL, so that diffusion restrictions within the cells in EUDRAGIT RL or 800 microm HEMA-MMA capsules should be negligible. The ratio of external to internal diffusion resistance (Biot number) was less than 1, so that at most, only a small diffusion effect on glucose utilization should be expected (i.e., the overall effectiveness factors were greater than 0.8). These calculations were consistent with experimental observation of encapsulated islet behavior but not fully with CHO cell behavior. Permeability restricted cell viability and growth is potentially a major limitation of encapsulated cells; further analysis is warranted.

  13. Nanosized sustained-release pyridostigmine bromide microcapsules: process optimization and evaluation of characteristics

    Science.gov (United States)

    Tan, Qunyou; Jiang, Rong; Xu, Meiling; Liu, Guodong; Li, Songlin; Zhang, Jingqing

    2013-01-01

    Background Pyridostigmine bromide (3-[[(dimethylamino)-carbonyl]oxy]-1-methylpyridinium bromide), a reversible inhibitor of cholinesterase, is given orally in tablet form, and a treatment schedule of multiple daily doses is recommended for adult patients. Nanotechnology was used in this study to develop an alternative sustained-release delivery system for pyridostigmine, a synthetic drug with high solubility and poor oral bioavailability, hence a Class III drug according to the Biopharmaceutics Classification System. Novel nanosized pyridostigmine-poly(lactic acid) microcapsules (PPNMCs) were expected to have a longer duration of action than free pyridostigmine and previously reported sustained-release formulations of pyridostigmine. Methods The PPNMCs were prepared using a double emulsion-solvent evaporation method to achieve sustained-release characteristics for pyridostigmine. The preparation process for the PPNMCs was optimized by single-factor experiments. The size distribution, zeta potential, and sustained-release behavior were evaluated in different types of release medium. Results The optimal volume ratio of inner phase to external phase, poly(lactic acid) concentration, polyvinyl alcohol concentration, and amount of pyridostigmine were 1:10, 6%, 3% and 40 mg, respectively. The negatively charged PPNMCs had an average particle size of 937.9 nm. Compared with free pyridostigmine, PPNMCs showed an initial burst release and a subsequent very slow release in vitro. The release profiles for the PPNMCs in four different types of dissolution medium were fitted to the Ritger-Peppas and Weibull models. The similarity between pairs of dissolution profiles for the PPNMCs in different types of medium was statistically significant, and the difference between the release curves for PPNMCs and free pyridostigmine was also statistically significant. Conclusion PPNMCs prepared by the optimized protocol described here were in the nanometer range and had good uniformity

  14. Factors influencing use of analgesics among construction workers in the Ga-Eastmunicipality of the Greater Accra region, Ghana.

    Science.gov (United States)

    Badzi, Caroline D; Ackumey, Mercy M

    2017-12-01

    Analgesics also known as painkillers are widely used for pain relief. There are severe health implications associated with excessive use of analgesics. This paper examines factors influencing the use of analgesics among construction workers in the Ga-East Municipality (GEM) of the Greater Accra region of Ghana. This is a cross-sectional study involving 206 construction workers randomly sampled from 7 construction sites in the GEM. A structured questionnaire was used to elicit responses on knowledge of analgesics, types of analgesics used and factors influencing the use of analgesics. Chi-square test analysis was used to examine factors influencing analgesic use. The majority of workers were aged between 15 to 44 years (89.8%) and 51.9 percent of respondents had completed Junior high school. Many respondents (68.0%) used Brand 1 a locally manufactured analgesic with paracetamol, aspirin and caffeine as the active ingredients and 31.6 percent of respondents had no knowledge of possible side effects of continuous use of analgesics. Chi square analysis showed that age was significantly associated with use of analgesics (peffects did not influence use (p>0.05). Television and radio advertisements influenced use of analgesics (peffects was inadequate. Pharmacists and chemists involvement in education of clients of the side effects of analgesics is highly recommended to minimise misuse. The Food and Drugs Authority should regulate the proliferation of advertisements for analgesics in the media. None declared.

  15. Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

    Science.gov (United States)

    Bae, Joonwon

    2011-07-01

    Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT@C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer@PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT@C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT@C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT@C microcapsules were measured with a lithium battery half cell tests.

  16. Report: Optimization study of the preparation factors for argan oil microcapsule based on hybrid-level orthogonal array design via SPSS modeling.

    Science.gov (United States)

    Zhao, Xi; Wu, Xiaoli; Zhou, Hui; Jiang, Tao; Chen, Chun; Liu, Mingshi; Jin, Yuanbao; Yang, Dongsheng

    2014-11-01

    To optimize the preparation factors for argan oil microcapsule using complex coacervation of chitosan cross-linked with gelatin based on hybrid-level orthogonal array design via SPSS modeling. Eight relatively significant factors were firstly investigated and selected as calculative factors for the orthogonal array design from the total of ten factors effecting the preparation of argan oil microcapsule by utilizing the single factor variable method. The modeling of hybrid-level orthogonal array design was built in these eight factors with the relevant levels (9, 9, 9, 9, 7, 6, 2 and 2 respectively). The preparation factors for argan oil microcapsule were investigated and optimized according to the results of hybrid-level orthogonal array design. The priorities order and relevant optimum levels of preparation factors standard to base on the percentage of microcapsule with the diameter of 30~40 μm via SPSS. Experimental data showed that the optimum factors were controlling the chitosan/gelatin ratio, the systemic concentration and the core/shell ratio at 1:2, 1.5% and 1:7 respectively, presetting complex coacervation pH at 6.4, setting cross-linking time and complex coacervation at 75 min and 30 min, using the glucose-delta lactone as the type of cross-linking agent, and selecting chitosan with the molecular weight of 2000~3000.

  17. Analgesic and Anti-inflammatory Profile of n-Hexane Fraction of ...

    African Journals Online (AJOL)

    Purpose: To evaluate the analgesic and anti-inflammatory activities of n-hexane extract of the whole plant of Viola betonicifolia Sm, family: Violaceace. Methods: The n-hexane fraction of Viola betonicifolia (VBHF) was tested for its analgesic and antiinflammatory activities (carrageenan-induced and histamine-induced ...

  18. Anti-inflammatory and analgesic activity of r.a.p . ( Radix Angelicae ...

    African Journals Online (AJOL)

    The objective of this paper was to study the anti-inflammatory and analgesic effects of Radix Angelicae Pubescentis (R.A.P) ethanol extracts. Three classic anti-inflammatory models and two analgesic models were used in this research. In anti-inflammatory tests, all the extracts have a certain inhibition on the acute ...

  19. Analgesic activity of crude aqueous extract of the root bark of ...

    African Journals Online (AJOL)

    Objective: The analgesic activity of crude aqueous extract of the root bark of Zanthoxylum xanthozyloides was studied in mice and rats with the view to verifying the claim in folklore medicine that the extract has analgesic activity. Method: The extract was obtained by Soxhlet extraction and rotatory evaporation, followed by ...

  20. Evaluation of Analgesic and Anti-inflammatory Activities of the Root ...

    African Journals Online (AJOL)

    Evaluation of Analgesic and Anti-inflammatory Activities of the Root Extracts of Indigofera spicata F. in Mice. ... The results clearly demonstrate the analgesic and anti-inflammatory effects of the aqueous and 80% methanolic root extracts of the plant, providing evidence in part for the folkloric use of the plant. Keywords: ...

  1. Do caffeine-containing analgesics promote dependence? A review and evaluation.

    Science.gov (United States)

    Feinstein, A R; Heinemann, L A; Dalessio, D; Fox, J M; Goldstein, J; Haag, G; Ladewig, D; O'Brien, C P

    2000-11-01

    Debates about the suspected association between kidney disease and use of analgesics have led to concern about whether caffeine could stimulate an undesirable overuse of phenacetin-free combined analgesics. A committee was asked to critically review the pertinent literature and to suggest guides for clinical practice and for consideration of international regulatory authorities. A group of international scientists, jointly selected by the regulatory authorities of Germany, Switzerland, and Austria and the pharmaceutical industry. All invited experts evaluated relevant literature and reports and added further information and comments. Caffeine has a synergistic effectiveness with analgesics. Although caffeine has a dependence potential, the potential is low. Experimental data regarding dependence potential for caffeine alone may not correspond to the conditions in patients with pain. Withdrawal is not likely to cause stimulation or sustainment of analgesic intake. For drug-induced headache, no single or combined analgesic was consistently identified as causative, and no evidence exists for a special role of caffeine. Strong dependence behavior was observed only in patients using phenacetin-containing preparations, coformulated with antipyretics/analgesics and caffeine. This finding may have led to the impression that caffeine stimulates overuse of analgesics. Although more experimental and long-term data would be desirable to show possible mechanisms of dependence and to offer unequivocal proof of safety, the committee concluded that the available evidence does not support the claim that analgesics coformulated with caffeine, in the absence of phenacetin, stimulate or sustain overuse.

  2. The In Vivo Analgesic Activity of Aqueous and Ethanolic Extracts of ...

    African Journals Online (AJOL)

    The standard drug, Piroxicam also produced a significant (P < 0.05) reduction in writhings, producing pain inhibition of 70.3 %. Conclusions: The analgesic effects produced by crude extracts of both experimental plants confirm that they are endowed with analgesic properties. Further work is suggested to isolate active ...

  3. Analgesic efficacy with rapidly absorbed ibuprofen sodium dihydrate in postsurgical dental pain

    DEFF Research Database (Denmark)

    Nørholt, Sven Erik; Hallmer, F; Hartlev, Jens

    2011-01-01

    To evaluate the onset of analgesic effect for a new formulation of ibuprofen sodium dihydrate versus conventional ibuprofen (ibuprofen acid).......To evaluate the onset of analgesic effect for a new formulation of ibuprofen sodium dihydrate versus conventional ibuprofen (ibuprofen acid)....

  4. Analgesic nephropathy as a cause of end-stage renal disease in a ...

    African Journals Online (AJOL)

    2011-03-09

    Mar 9, 2011 ... He was not a diabetic and did not use mercury-containing soap or cream or herbal ... Grade 2 hypertensive retinopathy. A diagnosis of analgesic .... Early detection of AN and discontinuation of analgesic use stabilizes or ...

  5. Inhibition of pituitary-gonadal axis in mice by long-term administration of D-Trp-6-LHRH microcapsules.

    Science.gov (United States)

    Bokser, L; Zalatnai, A; Schally, A V

    1989-03-01

    Female mice were injected, every 30 days for 5 months, with a long-acting formulation of microcapsules liberating 2.5 micrograms D-Trp-6-LHRH/day. The control group was injected with vehicle only. At 30 days after the last injection mice were killed, ovaries, uteri and adrenals were weighed and fixed in formalin for histological studies. LH and oestradiol concentrations were measured by RIA. In the D-Trp-6-LHRH-treated group, the weights of the ovaries and uterus (P less than 0.01 and P less than 0.05, respectively), and LH and oestradiol values (P less than 0.02 and P less than 0.01, respectively) were reduced compared to controls. Histologically, the ovaries contained a large number of degenerated, atretic follicles, and corpora lutea had almost completely disappeared. These results indicate, contrary to the prevailing opinion, that mice are sensitive to inhibitory effects of LHRH agonists and that a suppression of the pituitary-gonadal axis can be obtained with long-term administration of D-Trp-6-LHRH microcapsules.

  6. Effects of storage and yogurt matrix on the stability of tocotrienols encapsulated in chitosan-alginate microcapsules.

    Science.gov (United States)

    Tan, Phui Yee; Tan, Tai Boon; Chang, Hon Weng; Tey, Beng Ti; Chan, Eng Seng; Lai, Oi Ming; Baharin, Badlishah Sham; Nehdi, Imededdine Arbi; Tan, Chin Ping

    2018-02-15

    Tocotrienol microcapsules (TM) were formed by firstly preparing Pickering emulsion containing tocotrienols, which was then gelled into microcapsules using alginate and chitosan. In this study, we examined the stability of TM during storage and when applied into a model food system, i.e. yogurt. During storage at 40°C, TM displayed remarkably lower tocotrienols loss (50.8%) as compared to non-encapsulated tocotrienols in bulk oil (87.5%). When the tocotrienols were incorporated into yogurt, the TM and bulk oil forms showed a loss of 23.5% and 81.0%, respectively. Generally, the tocotrienols were stable in the TM form and showed highest stability when these TM were added into yogurt. δ-Tocotrienol was the most stable isomer in both forms during storage and when incorporated into yogurt. The addition of TM into yogurt caused minimal changes in the yogurt's color and texture but slightly altered the yogurt's viscosity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Layer-by-layer assembled magnetic prednisolone microcapsules (MPC) for controlled and targeted drug release at rheumatoid arthritic joints

    Energy Technology Data Exchange (ETDEWEB)

    Prabu, Chakkarapani [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli, Tamil Nadu (India); Latha, Subbiah, E-mail: lathasuba2010@gmail.com [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli, Tamil Nadu (India); Selvamani, Palanisamy [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli, Tamil Nadu (India); Ahrentorp, Fredrik; Johansson, Christer [Acreo Swedish ICT AB, Arvid Hedvalls Backe 4, Göteborg (Sweden); Takeda, Ryoji; Takemura, Yasushi [Electrical & Computer Engineering & Faculty of Engineering Division of Intelligent Systems Engineering, Yokohama National University (Japan); Ota, Satoshi [Department of Electrical and Electronic Engineering, Shizuoka University (Japan)

    2017-04-01

    We report here in about the formulation and evaluation of Magnetic Prednisolone Microcapsules (MPC) developed in order to improve the therapeutic efficacy relatively at a low dose than the conventional dosage formulations by means of magnetic drug targeting and thus enhancing bioavailability at the arthritic joints. Prednisolone was loaded to poly (sodium 4-styrenesulfonate) (PSS) doped calcium carbonate microspheres confirmed by the decrease in surface area from 97.48 m{sup 2}/g to 12.05 of m{sup 2}/g by BET analysis. Adsorption with oppositely charged polyelectrolytes incorporated with iron oxide nanoparticles was confirmed through zeta analysis. Removal of calcium carbonate core yielded MPC with particle size of ~3.48 µm, zeta potential of +29.7 mV was evaluated for its magnetic properties. Functional integrity of MPC was confirmed through FT-IR spectrum. Stability studies were performed at 25 °C±65% relative humidity for 60 days showed no considerable changes. Further the encapsulation efficiency of 63%, loading capacity of 18.2% and drug release of 88.3% for 36 h and its kinetics were also reported. The observed results justify the suitability of MPC for possible applications in the magnetic drug targeting for efficient therapy of rheumatoid arthritis. - Highlights: • Development of magnetic prednisolone microcapsules (MPC). • Physicochemical, pharmaceutical and magnetic properties of MPC were characterized. • Multiple layers of alternative polyelectrolytes prolonged prednisolone release time. • MPC is capable for targeted and sustained release rheumatoid arthritis therapy.

  8. Microcapsules with a pH responsive polymer: influence of the encapsulated oil on the capsule morphology.

    Science.gov (United States)

    Wagdare, Nagesh A; Marcelis, Antonius T M; Boom, Remko M; van Rijn, Cees J M

    2011-11-01

    Microcapsules were prepared by microsieve membrane cross flow emulsification of Eudragit FS 30D/dichloromethane/edible oil mixtures in water, and subsequent phase separation induced by extraction of the dichloromethane through an aqueous phase. For long-chain triglycerides and jojoba oil, core-shell particles were obtained with the oil as core, surrounded by a shell of Eudragit. Medium chain triglyceride (MCT oil) was encapsulated as relatively small droplets in the Eudragit matrix. The morphology of the formed capsules was investigated with optical and SEM microscopy. Extraction of the oil from the core-shell capsules with hexane resulted in hollow Eudragit capsules with porous shells. It was shown that the differences are related to the compatibility of the oils with the shell-forming Eudragit. An oil with poor compatibility yields microcapsules with a dense Eudragit shell on a single oil droplet as the core; oils having better compatibility yield porous Eudragit spheres with several oil droplets trapped inside. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Survival of freeze-dried microcapsules of α-galactosidase producing probiotics in a soy bar matrix.

    Science.gov (United States)

    Chen, Mo; Mustapha, Azlin

    2012-05-01

    Soy oligosaccharides, mainly α-galactosides, are prevalently present in soy protein products, and can result in unfavorable digestive effects when consumed. The aim of this research was to investigate the efficiency of α-galactoside reduction by probiotic bacterial hydrolysis and if such bacteria could be maintained in a high number in a soy protein product in a microencapsulated and freeze-dried form. The probiotic bacterium, Lactobacillus acidophilus LA-2, when induced by raffinose, exhibited a high level of α-galactosidase activity at 5.0 U/mg. To preserve probiotics with high viability, cells were microencapsulated and freeze-dried. Optimization of microencapsulation presented that a combination of κ-carrageenan and inulin at a proportion of 1.9:0.1 (w:w) as capsule wall materials, significantly retained the viability of the probiotics through freeze-drying (P ≤ 0.05). Scanning electron microscopic images confirmed that the morphology of the microcapsules was well preserved after freeze-drying. Upon incorporation into soy protein bars, the freeze-dried microcapsules of L. acidophilus LA-2 remained in high numbers throughout 14 weeks of storage at 4 °C. Results of this work with the support of other studies on microencapsulation benefits indicate a promising use of freeze-dried α-galactosidase positive microencapsulated probiotics in a soy food. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Structural and Magnetic Properties of Iron Oxide Nanoparticles in Shells of Hollow Microcapsules Designed for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    I. S. Lyubutin

    2015-12-01

    Full Text Available The functional hollow biodegradable microcapsules modified with the maghemite γ-Fe2O3 nanoparticles and the hollow spherical CoFe2O4/SiO2 nanocomposites were synthesized. Mössbauer spectroscopy data reveal that the main part maghemite nanoparticles have evident superparamagnetic behavior which is retained up to room temperature. This allows directing the microcapsules by an external magnetic field, which is very important for the problem of target drug delivery. On the other hand, the hollow spherical CoFe2O4/SiO2 nanocomposites with the small size particles do not show superparamagnetic behavior, but transit from magnetic to paramagnetic state by jump-like magnetic transition of the first order. This effect is a specific property of the magnetic nanoparticles isolated by an inert material. The method of synthesis can be modified with various bioligands on the silane surface, and such materials can have great prospects for use in diagnostics and bio-separation.

  11. Protein-assisted synthesis of double-shelled CaCO3 microcapsules and their mineralization with heavy metal ions.

    Science.gov (United States)

    Li, Xuan Qi; Feng, Zhiwei; Xia, Yinyan; Zeng, Hua Chun

    2012-02-13

    Calcium carbonate (CaCO(3)) is one of the most abundant and important biominerals in nature. Due to its biocompatibility, biodegradability and nontoxicity, CaCO(3) has been investigated extensively in recent years for various fundamental properties and technological applications. Inspired by basic wall structures of cells, we report a protein-assisted approach to synthesize CaCO(3) into a double-shelled structural configuration. Due to varying reactivities of outer and inner shells, the CaCO(3) microcapsules exhibit different sorption capacities and various resultant structures toward different kinds of heavy metal ions, analogical to biologically controlled mineralization (BCM) processes. Surprisingly, three mineralization modes resembling those found in BCM were found with these bacterium-like "CaCO(3) cells". Our investigation of the cytotoxicity (MTT assay protocol) also indicates that the CaCO(3) microcapsules have almost no cytotoxicity against HepG2 cells, and they might be useful for future application of detoxifying heavy metal ions after further study. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Steady cone-jet mode in compound-fluidic electro-flow focusing for fabricating multicompartment microcapsules

    Science.gov (United States)

    Si, Ting; Yin, Chuansheng; Gao, Peng; Li, Guangbin; Ding, Hang; He, Xiaoming; Xie, Bin; Xu, Ronald X.

    2016-01-01

    A compound-fluidic electro-flow focusing (CEFF) process is proposed to produce multicompartment microcapsules. The central device mainly consists of a needle assembly of two parallel inner needles and one outer needle mounted in a gas chamber with their tips facing a small orifice at the bottom of the chamber. As the outer and the inner fluids flow through the needle assembly, a high-speed gas stream elongates the liquid menisci in the vicinity of the orifice entrance. An electric field is further integrated into capillary flow focusing to promote the formation of steady cone-jet mode in a wide range of operation parameters. The multiphase liquid jet is broken up into droplets due to perturbation propagation along the jet surface. To estimate the diameter of the multiphase liquid jet as a function of process parameters, a modified scaling law is derived and experimentally validated. Microcapsules of around 100 μm with an alginate shell and multiple cores at a production rate of 103-105 per second are produced. Technical feasibility of stimulation triggered coalescence and drug release is demonstrated by benchtop experiments. The proposed CEFF process can be potentially used to encapsulate therapeutic agents and biological cargos for controlled micro-reaction and drug delivery.

  13. Analgesic properties of oleoylethanolamide (OEA) in visceral and inflammatory pain.

    Science.gov (United States)

    Suardíaz, Margarita; Estivill-Torrús, Guillermo; Goicoechea, Carlos; Bilbao, Ainhoa; Rodríguez de Fonseca, Fernando

    2007-12-15

    Oleoylethanolamide (OEA) is a natural fatty acid amide that mainly modulates feeding and energy homeostasis by binding to peroxisome proliferator-activated receptor-alpha (PPAR-alpha) [Rodríguez de Fonseca F, Navarro M, Gómez R, Escuredo L, Navas F, Fu J, et al. An anorexic lipid mediator regulated by feeding. Nature 2001;414:209-12; Fu J, Gaetani S, Oveisi F, Lo Verme J, Serrano A, Rodríguez de Fonseca F, et al. Oleoylethanolamide regulates feeding and body weight through activation of the nuclear receptor PPAR-alpha. Nature 2003;425:90-3]. Additionally, it has been proposed that OEA could act via other receptors, including the vanilloid receptor (TRPV1) [Wang X, Miyares RL, Ahern GP. Oleoylethanolamide excites vagal sensory neurones, induces visceral pain and reduces short-term food intake in mice via capsaicin receptor TRPV1. J Physiol 2005;564:541-7.] or the GPR119 receptor [Overton HA, Babbs AJ, Doel SM, Fyfe MC, Gardner LS, Griffin G, et al. Deorphanization of a G protein-coupled receptor for oleoylethanolamide and its use in the discovery of small-molecule hypophagic agents. Cell Metab 2006;3:167-175], suggesting that OEA might subserve other physiological roles, including pain perception. We have evaluated the effect of OEA in two types of nociceptive responses evoked by visceral and inflammatory pain in rodents. Our results suggest that OEA has analgesic properties reducing the nociceptive responses produced by administration of acetic acid and formalin in two experimental animal models. Additional research was performed to investigate the mechanisms underlying this analgesic effect. To this end, we evaluated the actions of OEA in mice null for the PPAR-alpha receptor gene and compared its actions with those of PPAR-alpha receptor wild-type animal. We also compared the effect of MK-801 in order to evaluate the role of NMDA receptor in this analgesia. Our data showed that OEA reduced visceral and inflammatory responses through a PPAR

  14. Evaluation of anti-pyretic and analgesic activity of Emblica officinalis Gaertn.

    Science.gov (United States)

    Perianayagam, James B; Sharma, S K; Joseph, Aney; Christina, A J M

    2004-11-01

    The present study was designed to investigate the anti-pyretic and analgesic activity of ethanol (EEO) and aqueous (AEO) extracts of Emblica officinalis fruits in several experimental models. A single oral dose of EEO and AEO (500 mg/kg, i.p.) showed significant reduction in brewer's yeast induced hyperthermia in rats. EEO and AEO also elicited pronounced inhibitory effect on acetic acid-induced writhing response in mice in the analgesic test. Both, EEO and AEO did not show any significant analgesic activity in the tail-immersion test. These findings suggest that extracts of Emblica officinalis fruits possessed potent anti-pyretic and analgesic activity. Preliminary phytochemical screening of the extracts showed the presence of alkaloids, tannins, phenolic compounds, carbohydrates and amino acids, which may be responsible for anti-pyretic and analgesic activities.

  15. Study of analgesic activity of ethanol extract of Phlogacanthus thyrsiflorus on experimental animal models

    Directory of Open Access Journals (Sweden)

    Apurba Mukherjee

    2009-06-01

    Full Text Available The aim of the study was to evaluate the central and peripheral analgesic action of Phlogacanthus thyrsiflorus in experimental animal models. The extract was prepared by percolation method and acute oral toxicity testing was performed as per OECD guidelines. Analgesic activity was assessed by tail flick method (for central action and glacial acetic acid-induced writhing test (for peripheral action. Leaves extract (500 mg/kg, p.o. and aspirin (100 mg/kg showed significant peripheral analgesic activity (p<0.05. Leaves extract (500 mg/kg, p.o. and pethidine (50 mg/kg, i.p. also showed significant central analgesic activity (p<0.05. Naloxone (1 mg/kg, s.c. was used to find the mechanism of central analgesic action. Some partial agonistic activity for the opioid receptors seems to be probable mechanism of action.

  16. Synthesis and biological screening of 4-(1-pyrrolidinyl) piperidine derivatives as effective analgesics

    International Nuclear Information System (INIS)

    Saify, Z.S.; Malick, T.Z.; Mallick, T.Z.

    2014-01-01

    A variety of 4(1-pyrrolidinyl) piperidine analogs 2-6 with variable substituents on phenyl ring of phenacyl moiety were synthesized and evaluated for their analgesic inhibitory potential by tail flick method revealed significant analgesic activity. The synthetic compounds exhibit analgesic inhibitory potential was ranging from significant to highly significant activity. Compounds were evaluated by thermal stimuli (tail immersion method) at the dose of 50 mg/kg of body weight. The compounds 2-5 showed significant and highly significant analgesic activity. Pethidine was used as reference drug. Same compounds tested at the dose of 75mg/kg of body weight showed toxicity. The size of the substituent, electron donating or withdrawing affect of substituents as well as the position of substituent on phenyl ring affected the activity. These compounds could be considered to develop a new class of analgesics. (author)

  17. Perceived efficacy of analgesic drug regimens used for koalas (Phascolarctos cinereus) in Australia.

    Science.gov (United States)

    de Kauwe, Tyron; Kimble, Benjamin; Govendir, Merran

    2014-06-01

    Recent publications report that some therapeutic drugs used in koalas (Phascolarctos cinereus) have poor oral absorption and are rapidly eliminated. Therefore, information on both the analgesic drug dosage regimens used to treat koalas in Australia and koala caretakers' perceptions of the efficacy of these drugs to control pain was collected for the purpose of identifying the most popular analgesics to prioritize future analgesic pharmacokinetic studies for this species. A one-page, double-sided questionnaire was distributed both electronically and by mail to Australian koala care facilities such as zoos and wildlife hospitals. Information was received from 13 respondents. Nonsteroidal anti-inflammatory drugs (NSAIDs) were the most frequently used analgesics, followed by full micro- and partial opioid receptor agonists and acetaminophen with or without codeine. The full micro-opioid receptor agonists and acetaminophen with or without codeine were most consistently considered efficacious, with wider variation in perceived efficacy of the NSAIDs. Analgesic drug combinations were generally thought efficacious.

  18. Analgesic activity of Nelsonia canescens (Lam.) Spreng.root in albino rats

    Science.gov (United States)

    Mohaddesi, Behzad; Dwivedi, Ravindra; Ashok, B. K.; Aghera, Hetal; Acharya, Rabinarayan; Shukla, V. J.

    2013-01-01

    Present study was undertaken to evaluate analgesic activity of root of Nelsonia canescens (Lam.) Spreng, a folklore medicinal plant used as the one of the source plant of Rasna. Study was carried out at two dose levels (270 mg/kg and 540 mg/kg) in albino rats. Analgesic activity was evaluated in formalin induced paw licking, and tail flick methods whereas indomethacin and pentazocine were used as standard analgesic drugs, respectively. At both the dose levels, test drug non-significantly decreased paw licking response at both time intervals. In tail flick model, the administration of the test drug increased pain threshold response in a dose dependent manner. In therapeutically equivalent dose level, analgesic activity was observed only after 180 min while in TED ×2 treated group analgesia was observed at 30 min and lasted even up to 240 min. The results suggested that N.canescens root possess moderate analgesic activity. PMID:24250136

  19. 自修复微胶囊的制备与表征%Preparation and Characterization of Microcapsules for Self-healing Material

    Institute of Scientific and Technical Information of China (English)

    鄢瑛; 罗永平; 张会平

    2011-01-01

    Microcapsules for self-healing material were synthesized by in-situ polymerization with urea-formaldehyde resin as the shell material and dicyclopentadiene as the core material. The formation process of microcapsules was observed by using optical microscopy(OM). The chemical structure was characterized by fourier transform infrared(FTIR). The thermal stability and particle size distribution of microcapsules were analyzed by thermogravimetric analysis (TGA) and laser particle size analyzer. The results indicate that dicyclopentadiene is well encapsulated by urea-formaldehyde resin. The microcapsules with smooth surface and good dispersibility are prepared. The microcapsules are obtained with good chemical stability and narrow particle size distribution, and the average particle size is 10. 394μm.%以双环戊二烯(DCPD)为芯材、脲醛树脂为壁材,利用原位聚合法合成自修复微胶囊.采用光学显微镜观察了微胶囊的形成过程,傅里叶红外光谱表征了微胶囊的化学成分,热失重分析仪和激光粒度仪表征了微胶囊的热稳定性和粒径分布.研究表明,脲醛树脂能将芯材DCPD良好包封,微胶囊形貌质量好,分散效果好,热稳定性好,粒径分布较窄,平均粒径为10.394μm.

  20. Peripheral analgesic effects of ketamine in acute inflammatory pain

    DEFF Research Database (Denmark)

    Pedersen, J L; Galle, T S; Kehlet, H

    1998-01-01

    BACKGROUND. This study examined the analgesic effect of local ketamine infiltration, compared with placebo and systemic ketamine, in a human model of inflammatory pain. METHODS: Inflammatory pain was induced by a burn (at 47 degrees C for 7 min; wound size, 2.5 x 5 cm) on the calf in 15 volunteers...... on 3 separate days with 7-day intervals. They received either (1) subcutaneous infiltration with ketamine in the burn area (local treatment) and contralateral placebo injections, or (2) subcutaneous ketamine contralateral to the burn (systemic treatment) and placebo in the burn area, or (3) placebo...... hyperalgesia. Local ketamine infiltration reduced pain during the burn injury compared with systemic treatment and placebo (P ketamine treatment compared with placebo immediately after injection (P

  1. Vasorelaxant effect of the analgesic clonixin on rat aorta.

    Science.gov (United States)

    Morales, M A; Silva, A; Brito, G; Bustamante, S; Ponce, H; Paeile, C

    1995-03-01

    1. A novel vasorelaxant effect of clonixinate of L-lysine (Clx), analgesic and anti-inflammatory, was studied in rat aortic rings. 2. Clx completely relaxed aortic rings contracted by KCl 70 mM and together with its analog flunixin exhibited lesser potency but equal efficacy than verapamil. In comparison, indomethacin, which is a more potent cyclo-oxygenase inhibitor relaxed only about 40% of the maximal contraction of aortic rings. 3. Furthermore, Clx antagonized Ca2+ dependent aortic contraction and BAY K-8644 induced aortic contraction suggesting its calcium antagonist character. 4. From these results it can be concluded that the hypotensive effect seen in rats in vivo after Clx i.v. injection arises because of vasodilatory effect of Clx and gives further support to the proposal that the pharmacological mechanism of action of Clx should be calcium antagonism.

  2. The effects of analgesics on central processing of tonic pain

    DEFF Research Database (Denmark)

    Lelic, Dina; Hansen, Tine M; Mark, Esben Bolvig

    2017-01-01

    to tonic pain is modified by oxycodone (opioid) and venlafaxine (SNRI). Methods Twenty healthy males were included in this randomized, cross-over, double-blinded study. 61-channel electroencephalogram (EEG) was recorded before and after five days of treatment with placebo, oxycodone (10 mg extended release......Introduction Opioids and antidepressants that inhibit serotonin and norepinephrine reuptake (SNRI) are recognized as analgesics to treat moderate to severe pain, but the central mechanisms underlying their analgesia remain unclear. This study investigated how brain activity at rest and exposed...... b.i.d) or venlafaxine (37.5 mg extended release b.i.d) at rest and during tonic pain (hand immersed in 2 °C water for 80 s). Subjective pain and unpleasantness scores of tonic pain were recorded. Spectral analysis and sLORETA source localization were done in delta (1–4 Hz), theta (4–8 Hz), alpha (8...

  3. Analgesic and antipyretic activities of Momordica charantia linn. fruits

    Directory of Open Access Journals (Sweden)

    Roshan Patel

    2010-01-01

    Full Text Available Plant Momordica charantia Linn. belongs to family Cucurbitaceae. It is known as bitter gourd in English and karela in Hindi. Earlier claims show that the plant is used in stomachic ailments as a carminative tonic; as an antipyretic and antidiabetic agent; and in rheumatoid arthritis and gout. The fruit has been claimed to contain charantin, steroidal saponin, momordium, carbohydrates, mineral matters, ascorbic acid, alkaloids, glucosides, etc. The ethanolic extract of the fruit showed the presence of alkaloids, tannins, glycosides, steroids, proteins, and carbohydrates. The present study was carried out using acetic acid-induced writhing and tail-immersion tests in mice, while yeast-induced pyrexia in rats. The ethanolic extracts (250 and 500 mg/kg, po. showed an analgesic and antipyretic effect, which was significantly higher than that in the control rats. The observed pharmacological activities provide the scientific basis to support traditional claims as well as explore some new and promising leads.

  4. SEDATIVE AND ANALGESIC EFFECTS OF DETOMIDINE HYDROCHLORIDE IN GOATS

    Directory of Open Access Journals (Sweden)

    A. N. Tunio., A. B. Kalhoro and I.H. Kathio1

    2003-07-01

    Full Text Available The sedative and analgesic effects of three dose rates of detomidine (40, 50 and 60µg/kg body weight were studied in six goats. Moderate to deep sedation occurred after administration of 40µg/kg of detomidine as compared to deep sedation produced by 50 and 60µg/kg of detomidine. The degree, onset and duration of sedation and onset and duration of maximum sedation were all dose dependent. Skin analgesia and recumbency were produced in all animals with higher doses (50 and 60µg/kg and in three animals with lower dose (40µg/kg. Duration of recumbency was 22.66 ± 1.45, 35.16 ± 1.68 and 55.66 ± 1.64 minutes after administration of 40, 50 and 60µg/kg of detomidine, respectively.

  5. Choosing the right analgesic. A guide to selection.

    Science.gov (United States)

    Bushnell, Timothy G; Justins, Douglas M

    1993-09-01

    Pain is an unpleasant sensory and emotional experience, unique to each individual patient. In the dynamic processes of nociceptive stimulation, signal transmission, central decoding and interpretation there are many potential sites for pharmacological intervention, and there are many drugs which will produce analgesia. An analgesic 'ladder' has been proposed for rational pain relief in cancer and a similar concept should be used in all forms of acute and chronic pain. Continuing research and drug development undoubtedly extends our understanding, but consistent improvement in our clinical ability to relieve pain depends more on our willingness to consider the need of each patient individually, to tailor the drug, route and mode of administration to that patient's requirements, and then to monitor on the basis of the response of the patient to the treatment.

  6. Efficacy and Safety of Remifentanil as an Alternative Labor Analgesic

    Directory of Open Access Journals (Sweden)

    Sandeep Devabhakthuni

    2013-01-01

    Full Text Available The objective of this review was to evaluate the clinical efficacy and safety of remifentanil in the management of labor pain. Although neuraxial analgesia is the best option during labor, alternative analgesic options are needed for patients with contraindications. Using a systematic literature search, clinical outcomes of remifentanil for labor pain have been summarized. Also, comparisons of remifentanil to other options including meperidine, epidural analgesia, fentanyl, and nitrous oxide are provided. Based on the literature review, remifentanil is associated with high overall maternal satisfaction and favorable side-effect profile. However, due to the low reporting of adverse events, large, randomized controlled trials are needed to evaluate maternal and neonatal safety adequately and determine the optimal dosing needed to provide effective analgesia. While remifentanil is a feasible alternative for patients who cannot or do not want to receive epidural analgesia, administration should be monitored closely for potential adverse effects.

  7. Pharmacological interactions of anti-inflammatory-analgesics in odontology.

    Science.gov (United States)

    Gómez-Moreno, Gerardo; Guardia, Javier; Cutando, Antonio; Calvo-Guirado, José Luis

    2009-02-01

    In this second article we describe the more interesting pharmacological interactions in dental practice based on the prescription of analgesic narcotics, paracetamol and non-selective non-steroid anti-inflammatory drugs (NSAI) (which inhibit cyclooxigenase 1 -COX 1- and cyclooxigenase 2 -COX 2-) and selective NSAIs (COX 2 inhibitors). The importance of preventing the appearance of these pharmacological interactions is because these are medicaments prescribed daily in odontology for moderate pain treatment and inflammation in the oral cavity. Paracetamol can interact with warfarin and therefore care should be taken with chronic alcoholic patients. All NSAIs reduce renal blood flow and consequently are capable of reducing the efficacy of medicaments used for treating arterial hypertension, which act via a renal mechanism. Especial attention should be taken considering the risk of interaction between the antagonists of AT1 receptors of angiostensin II (ARAII) and the NSAIs.

  8. Analgesic synergy between opioid and α2 -adrenoceptors.

    Science.gov (United States)

    Chabot-Doré, A-J; Schuster, D J; Stone, L S; Wilcox, G L

    2015-01-01

    Opioid and α2 -adrenoceptor agonists are potent analgesic drugs and their analgesic effects can synergize when co-administered. These supra-additive interactions are potentially beneficial clinically; by increasing efficacy and/or reducing the total drug required to produce sufficient pain relief, undesired side effects can be minimized. However, combination therapies of opioids and α2 -adrenoceptor agonists remain underutilized clinically, in spite of a large body of preclinical evidence describing their synergistic interaction. One possible obstacle to the translation of preclinical findings to clinical applications is a lack of understanding of the mechanisms underlying the synergistic interactions between these two drug classes. In this review, we provide a detailed overview of the interactions between different opioid and α2 -adrenoceptor agonist combinations in preclinical studies. These studies have identified the spinal cord as an important site of action of synergistic interactions, provided insights into which receptors mediate these interactions and explored downstream signalling events enabling synergy. It is now well documented that the activation of both μ and δ opioid receptors can produce synergy with α2 -adrenoceptor agonists and that α2 -adrenoceptor agonists can mediate synergy through either the α2A or the α2C adrenoceptor subtypes. Current hypotheses surrounding the cellular mechanisms mediating opioid-adrenoceptor synergy, including PKC signalling and receptor oligomerization, and the evidence supporting them are presented. Finally, the implications of these findings for clinical applications and drug discovery are discussed. This article is part of a themed section on Opioids: New Pathways to Functional Selectivity. To view the other articles in this section visit http://dx.doi.org/10.1111/bph.2015.172.issue-2. © 2014 The British Pharmacological Society.

  9. The use of different analgesics in orthodontic tooth movements.

    Science.gov (United States)

    Hammad, Shaza M; El-Hawary, Yousry M; El-Hawary, Amira K

    2012-09-01

    To provide a semi-quantitative assessment of the effect of different analgesics (celecoxib, ketorolac, and paracetamol) on tooth movement and bone resorption using immunohistochemical staining of matrix metalloproteinase-13 (MMP-13). Forty white male rats (12-weeks old; body weight: 230-250 g) were divided into four groups (10 rats each) and were given the treatment once a day for 2 consecutive months. Group A (control group) rats were given the reverse osmosis water; group B rats were given 10 mg/kg celecoxib; group C rats were given 3 mg/kg ketorolac; and group D rats were given 150 mg/kg paracetamol. A precalibrated closed Sentalloy coil spring was placed inside each rat mouth to deliver a constant force of 50 cN. The magnitude of tooth movement was measured intraorally. After 2 months, the rats were sacrificed, and the sections were mounted on L-polylysine-coated glass slides. Slides from each specimen were stained with hematoxylin and eosin, and others were stained with MMP-13. Data were analyzed with the one-way analysis of variance (ANOVA). Celecoxib, ketorolac, and paracetamol groups showed tooth movement of 1.81 ± 0.43 mm, 1.13 ± 0.28 mm, and 1.08 ± 0.27 mm, respectively. The mean number of MMP-13-positive osteoclasts was highest in celecoxib-treated group followed by the control group and was decreased in the ketorolac and paracetamol groups. Comparing all groups to the control revealed significant differences (P < .05). Administration of celecoxib did not reduce bone resorption or interfere with tooth movement in rats compared to other analgesics tested (ketorolac and paracetamol).

  10. Factors influencing the properties and performance of microcapsules for immunoprotection of pancreatic islets.

    Science.gov (United States)

    van Schilfgaarde, R; de Vos, P

    1999-01-01

    There are several approaches of immunoprotection of pancreatic islets for the purpose of successful allo- or xenotransplantation in the absence of immunosuppressive medication. Extravascular approaches are either macroencapsulation (large numbers of islets together in one device) or microencapsulation. The latter approach is to envelop each individual islet in a semipermeable immunoprotective capsule. Quite promising results have been achieved with polylysine-alginate microencapsulated islet grafts in rodents, but clinical application is still restricted to a very small number of cases. Relevant considerations regard the following aspects. The biocompatibility of the microcapsules is influenced by the chemical composition of the materials applied and by mechanical factors related to the production process. With purified instead of crude alginates, the percentage of capsules with fibrotic overgrowth is reduced to approximately ten percent, and the remaining overgrowth is mainly explained by mechanical factors, i.e. inadequate encapsulation of individual islets. Even with purified alginates, however, the duration of encapsulated graft function is limited to a period of six to twenty weeks. Obviously, other factors than bioincompatibility play a role, which factors have to be identified. The limited duration of graft survival cannot be explained by rejection since, in rats, survival times of encapsulated isografts are similar, if not identical, to those of encapsulated allografts. An important factor is probably insufficient nutrition as a consequence of insufficient blood supply of the encapsulated and thus isolated islet. This also influences the functional performance of encapsulated islet grafts. Although normoglycemia can be readily obtained in streptozotocin diabetic rat recipients, glucose tolerance remains severely impaired, as a consequence of an insufficient increase of insulin levels in response to intravenous or oral glucose challenge. Important factors

  11. Polymeric microcapsules assembled from a cationic/zwitterionic pair of responsive block copolymer micelles.

    Science.gov (United States)

    Addison, Timothy; Cayre, Olivier J; Biggs, Simon; Armes, Steven P; York, David

    2010-05-04

    Using a layer-by-layer (LbL) approach, this work presents the preparation of hollow microcapsules with a membrane constructed entirely from a cationic/zwitterionic pair of pH-responsive block copolymer micelles. Our previous work with such systems highlighted that, in order to retain the responsive nature of the individual micelles contained within the multilayer membranes, it is important to optimize the conditions required for the selective dissolution of the sacrificial particulate templates. Consequently, here, calcium carbonate particles have been employed as colloidal templates as they can be easily dissolved in aqueous environments with the addition of chelating agents such as ethylenediaminetetraacetic acid (EDTA). Furthermore, the dissolution can be carried out in solutions buffered to a desirable pH so not to adversely affect the pH sensitive micelles forming the capsule membranes. First, we have deposited alternating layers of anionic poly[2-(dimethylamino)ethyl methacrylate-block-poly(2-(diethylamino)ethyl methacrylate)] (PDMA-PDEA) and cationic poly(2-(diethylamino)ethyl)methacrylate-block-poly(methacrylic acid) (PDEA-PMAA) copolymer micelles onto calcium carbonate colloidal templates. After deposition of five micelle bilayers, addition of dilute EDTA solution resulted in dissolution of the calcium carbonate and formation of hollow polymer capsules. The capsules were imaged using atomic force microscopy (AFM) and scanning electron microscopy (SEM), which shows that the micelle/micelle membrane is sufficiently robust to withstand dissolution of the supporting template. Quartz crystal microbalance studies were conducted and provide good evidence that the micelle multilayer structure is retained after EDTA treatment. In addition, a hydrophobic dye was incorporated into the micelle cores prior to adsorption. After dissolution of the particle template, the resulting hollow capsules retained a high concentration of dye, suggesting that the core

  12. Adsorption properties of technetium and rhenium for hybrid microcapsules enclosing Toa extractant

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Y.; Mimura, H.; Niibori, Y. [Tohoku University, Graduate School of Engineering, Department of Quantum Science and Energy Engineering, Aramaki-Aza-Aoba 6-6-01-2, Aoba-ku, Sendai-shi, Miyagi-ken, 980-8579 Japan (Japan); Koyama, S.; Ohnishi, T., E-mail: yanwu@cyric.tohoku.ac.j [Japan Atomic Energy Agency, O-arai Research and Development Center, Fuels and Materials Department, Alpha-Gamma Section, Narita-cho 4002, O-arai-machi, Ibaraki, 311-1393 Japan (Japan)

    2010-10-15

    Special attention has been given to the separation and recovery of the VII-group elements Tc and Re, in relation to the partitioning of high-level liquid waste (HLLW) generated from the nuclear fuel reprocessing process. In this study, a tertiary amine (tri-n-octylamine Toa), which is effective for the extraction of oxo anions, was encapsulated in a calcium alginate gel polymer (CaALG), and the adsorption behaviours of TcO{sub 4} and ReO{sub 4}{sup -} in the presence of nitric acid and hydrochloric acid were examined by using calcium alginate microcapsules (M Cs) enclosing Toa extractant (Toa-CaALG M Cs). The order of the distribution coefficient K{sub d} for different oxo anions at 0.1 M HNO{sub 3} was ReO{sub 4}{sup -}> WO{sub 4}{sup 2-}> CrO{sub 4}{sup 2-} {approx} MoO{sub 4}{sup 2-}>> SeO{sub 3}{sup 2-}. Toa-CaALG still exhibited high uptake ability for ReO{sub 4}{sup -} even after irradiation with {sup 60}Co {gamma}-rays (dose: 17.6 kGy). Uptake of TcO{sub 4}{sup -} in the presence of 1 M HNO{sub 3} was readily attained within 3 h. Relatively large K{sub d} values above 10{sup 2} cm{sup 3}/g were obtained for Toa-CaALG in the presence of 0.01 {approx} 1 M HNO{sub 3}. All of the TcO{sub 4}{sup -} was successfully adsorbed by Toa-CaALG from the simulated HLLW. The adsorbed TcO{sub 4}{sup -} was then effectively eluted with 5 M or 7 M HNO{sub 3} solution. Further, the selective uptake of ReO{sub 4}{sup -} (a chemical analogue of TcO{sub 4}{sup -}) was confirmed by using actual HLLW (Fbr, Joyo, JAEA), and uptake (%) above 99% was obtained. Toa-CaALG was thus effective for the selective separation and recovery of TcO{sub 4}{sup -} and ReO{sub 4}{sup -} from waste solutions containing highly concentrated HNO{sub 3} and NaNO{sub 3}. Microencapsulation techniques with alginate gel polymer can be applied to other ion exchangers and extractants, and the M Cs immobilizing these adsorbents are effective for the advanced separation of various radionuclides, rare metals and

  13. Analgesic Potential of Opuntia dillenii and Its Compounds Opuntiol and Opuntioside Against Pain Models in Mice

    Directory of Open Access Journals (Sweden)

    Faheema Siddiqui

    2016-05-01

    Full Text Available Opuntia dillenii (Nagphana traditionally used against inflammation and also possess analgesic effect. Thus in the present study analgesic properties of O. dillenii cladode methanol extract, its fractions obtained via vacuum liquid chromatography along with isolated α-pyrones, opuntiol and its glucoside, opuntioside were analyzed. The acetic acid-induced writhes were reduced by O. dillenii test agents with opuntioside being most effective (IC 50 26 ± 0.9 mg/kg and equipotent to diclofenac and β-sitosterol. Consistently, it also elicited most potent effect (IC 50: 28 ± 1.1 and 24 ± 1.2 mg/kg during early and late phases of formalin-induced paw licking, producing effect similar to diclofenac and indomethacin. It was also most effective in hot plate test. Naloxone (opioid antagonist reversed the analgesic effects of extract and fractions but failed to antagonize the opuntiol and opuntioside analgesic effects. In conclusion, edible O. dillenii extract, its fractions, opuntiol and opuntioside reduced peripheral and centrally mediated pain via opioid dependent and independent systems. Among them opuntioside emerged as most effective analgesic possibly due to the presence of glucose moiety at position 7 of its α-pyrone ring. This is the first report of opuntiol and opuntioside analgesic effect which may serve as lead compounds in designing of new analgesics.

  14. Canadian veterinarians’ use of analgesics in cattle, pigs, and horses in 2004 and 2005

    Science.gov (United States)

    Hewson, Caroline J.; Dohoo, Ian R.; Lemke, Kip A.; Barkema, Herman W.

    2007-01-01

    Anecdotal evidence suggests that many veterinarians may not use analgesics in livestock for routine surgical procedures or painful disease states. To investigate this, we conducted a national mail survey of a random sample of 1431 Canadian veterinarians (response rate, 50.1%). Questions primarily concerned veterinarians’ analgesic usage for common surgeries and medical conditions in beef and dairy cattle, pigs, and horses, and attitudes toward pain management. More than 90% of veterinarians used analgesic drugs for equine surgeries, for cesarean section in sows and cows, and for bovine claw amputation and omentopexy. However, in these and other categories, the analgesics used were often inadequate, and many veterinarians did not give analgesics to young animals. When castrated, 6 mo of age, and 95.8% of horses. Respondents largely agreed that there are no long-acting, cost-effective analgesics available for use in livestock (median rating 8/10; interquartile range 4–9), and that the long or unknown withdrawal periods of some drugs outweighed the benefits of using them (median rating 7/10; interquartile range 4–9). The results indicate an urgent need for veterinarians to manage pain in livestock better. Continuing education would help, as would an increase in the number of approved, cost-effective analgesic drugs with known withdrawal periods. PMID:17334029

  15. National consumption of opioid and nonopioid analgesics in Croatia: 2007–2013

    Directory of Open Access Journals (Sweden)

    Krnic D

    2015-08-01

    Full Text Available Darko Krnic,1 Andrea Anic-Matic,2 Svjetlana Dosenovic,2 Pero Draganic,1 Sasa Zezelic,1 Livia Puljak2 1Agency for Medicinal Products and Medical Devices, Zagreb, 2Laboratory for Pain Research, School of Medicine, University of Split, Split, Croatia Background: The increased consumption of analgesics has been documented worldwide during the last 2 decades. The aim of the study was to examine the trends in opioid and nonopioid analgesic consumption in Croatia between 2007 and 2013. Methods: Data on opioid consumption were extracted from the database of the national authority. All opioid and nonopioid analgesics were included in the analysis. Data were presented as defined daily doses per 1,000 inhabitants per day. Adequacy of opioid consumption was calculated using adequacy of consumption measure. Results: During the examined 7-year period, the total consumption and total cost of all analgesics in Croatia showed continuous increase. In the M01A group (anti-inflammatory and antirheumatic products, nonsteroids, ibuprofen had an exponential increasing trend, and in 2011, it overtook diclofenac consumption. Ibuprofen and diclofenac had the highest consumption also in the M02A group of topical products for joint and muscular pain. Tramadol was by far the most consumed type of opioids (N02A group and paracetamol in the group of other analgesics and antipyretics (N02B. The adequacy of consumption measure value was 0.19, indicating that Croatia is a country with a low opioid consumption. Conclusion: Between 2007 and 2013, both consumption of analgesics and their cost in Croatia had an increasing trend. Comparisons with data from other countries, based on the published literature, indicate that analgesic consumption in Croatia is still relatively low. Calculation of the adequacy of opioid consumption indicated that Croatia is a country with low opioid consumption. Further studies are necessary for establishing whether current analgesic consumption in

  16. Analgesic activity of Nelsonia canescens (Lam.) Spreng.root in albino rats

    OpenAIRE

    Mohaddesi, Behzad; Dwivedi, Ravindra; Ashok, B. K.; Aghera, Hetal; Acharya, Rabinarayan; Shukla, V. J.

    2013-01-01

    Present study was undertaken to evaluate analgesic activity of root of Nelsonia canescens (Lam.) Spreng, a folklore medicinal plant used as the one of the source plant of Rasna. Study was carried out at two dose levels (270 mg/kg and 540 mg/kg) in albino rats. Analgesic activity was evaluated in formalin induced paw licking, and tail flick methods whereas indomethacin and pentazocine were used as standard analgesic drugs, respectively. At both the dose levels, test drug non-significantly decr...

  17. Microcapsules with ragweed extraction by single coacervation%单凝聚法制备豚草提取物微胶囊剂的研究

    Institute of Scientific and Technical Information of China (English)

    包颖; 张国财

    2013-01-01

    The extraction of exotic plant ragweed (Ambrosia artemisiifolia L.) was made as core material and the gelatin was used as shell material to make the extraction into microcapsules by the single coacervation method.It can prevent the extraction of ragweed from inactivation,which could be easily caused by external condition such as illumination and temperature.The microcapsule technique can improve the property of extraction.The results showed that the morphology of microcapsules was regular and integrated observed under scanning electron microscope (SEM).Moreover,the core material was coated with shell material observed by the infrared spectrum analysis with Fourier transform infrared spectroscopy (FTIR).The association efficiency and loading capacity of the microcapsules determined by ultraviolet spectrophotometer were (44.79 ± 1.36)% and (59.72 ± 1.81)%,respectively.The medium diameter was 25.50 μm analyzed with laser diffraction particle size analyzer.And the results of thermogravimetric analysis (TGA) demonstrated that the thermal stability of the microcapsules was superior to the core material.Consequently,the microcapsules with the extraction can avoid the unstable defect of the natural extraction.In addition,the activity was also lengthened by this technique.%利用外来入侵植物豚草的粗提物质为囊芯材料,以明胶为囊皮材料,采用单凝聚法制备豚草提取物微胶囊制剂.结果表明:制成的微胶囊外部形态经电子扫描显微镜检测形态规则、完整;红外光谱分析显示囊芯材料包覆于囊皮材料中;利用紫外分光光度仪测其微胶囊的效率和有效载量,分别是(44.79±1.36)%和(59.72±1.81)%;利用激光粒度分析仪测其粒径分布,得到中位径25.50 μm;热重分析结果可以看出,微胶囊的热稳定性优于囊芯物质;因此制成的豚草提取物微胶囊剂弥补了植物源提取物质在稳定性上的缺陷,使其活性延长.

  18. Dissolution stability studies of suspensions of prolonged-release diclofenac microcapsules prepared by the Wurster process: I. Eudragit-based formulation and possible drug-excipient interaction.

    Science.gov (United States)

    Adeyeye, M C; Mwangi, E; Katondo, B; Jain, A; Ichikawa, H; Fukumori, Y

    2005-06-01

    The aim was to evaluate possible interaction in solid and liquid state of the drug with formulation excipients consequent to very fast drug release of diclofenac-Eudragit prolonged release microcapsules. The microcapsules were prepared by drug layering on calcium carbonate cores and coated with Eudragit RS 30D and L30D-55 as previously reported. Suspension of the microcapsules was prepared using microcrystalline cellulose/sodium carboxymethyl cellulose (Avicel CL-611) as medium. In vitro dissolution testing of the suspension was done, and, based on the dissolution results, possible interaction between diclofenac and Eudragit and Avicel in the medium was studied. Powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC) analyses were performed using 1:1 binary, 1:1:1 ternary mixtures and a ratio equivalent to that in the formulation. The mixtures were prepared by mixing the dispersions--Eudragit RS 30D or L30D-55 with the drug or other components, followed by drying at 60 degrees C for 48 h. Dry mixing was done using the powder equivalents of the polymers, Eudragit RS PO and L100-55, Avicel and calcium carbonate. In vitro dissolution of the suspended microcapsules showed a very fast release after 48 h (T50 = microcapsules (T50 = 6 h). DSC curves of the formulation components or microcapsules did not show the characteristic endothermic peak of diclofenac at 287 degrees C. Powder X-ray diffraction of the binary or ternary mixtures of diclofenac and Eudragit polymers indicated reduction, shift or modification of the crystalline peaks of the drug or excipients at 2theta of 12 degrees and 18 degrees , suggestive of interaction. Some changes in drug peak characteristics at 18 degrees and 23 degrees were observed for Avicel/drug mixture, though not significant. The DSC curves of the binary mixture of diclofenac co-dried with liquid forms of Eudragit (i.e. RS 30D or L30D-55) revealed greater interaction compared to the curves of drug and powdered forms of

  19. The preparation and infrared radar stealth performance test of a new paraffin-based phase transition microcapsule

    Science.gov (United States)

    Chen, Yingming; Zhang, Honghong; Gao, Weiting; Chen, Yingmin; Wang, Yifan

    2018-04-01

    For the problems that the phase change material apply to infrared stealth exists easy to broken, hard to control temperature, narrow infrared channel and based on the basic principles of infrared stealth technology, this paper proposed a scheme of thermal infrared composite invisibility multi-layer wrapping, which based on two sides, one is to control the material surface temperature, another is to reduce its infrared emissivity and combine with visible light pigment and electromagnetic wave absorbing material, to realize the materials' wide band compatible stealth. First, choose urea formaldehyde resin and paraffin to prepare multiphase-change microcapsules, and then combine it with the ferroferric oxide absorbing material, zinc oxide visible light pigment, to make the stealth material of wide band. The experimental results show that the new phase change capsule can realize the function of temperature control and infrared stealth in a special temperature range.

  20. Hydroxyapatite-armored poly(ε-caprolactone) microspheres and hydroxyapatite microcapsules fabricated via a Pickering emulsion route.

    Science.gov (United States)

    Fujii, Syuji; Okada, Masahiro; Nishimura, Taiki; Maeda, Hayata; Sugimoto, Tatsuya; Hamasaki, Hiroyuki; Furuzono, Tsutomu; Nakamura, Yoshinobu

    2012-05-15

    Hydroxyapatite (HAp) nanoparticle-armored poly(ε-caprolactone) (PCL) microspheres were fabricated via a "Pickering-type" emulsion solvent evaporation method in the absence of any molecular surfactants. It was clarified that the interaction between carbonyl/carboxylic acid groups of PCL and the HAp nanoparticles at an oil-water interface played a crucial role in the preparation of the stable Pickering-type emulsions and the HAp nanoparticle-armored microspheres. The HAp nanoparticle-armored PCL microspheres were characterized in terms of size, size distribution, morphology, and chemical compositions using scanning electron microscopy, laser diffraction, energy dispersive X-ray microanalysis, and thermogravimetric analysis. The presence of HAp nanoparticles at the surface of the microspheres was confirmed by scanning electron microscopy and energy dispersive X-ray microanalysis. Pyrolysis of the PCL cores led to the formation of the corresponding HAp hollow microcapsules. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Role of analgesics, sedatives, neuromuscular blockers, and delirium.

    Science.gov (United States)

    Hall, Jesse B; Schweickert, William; Kress, John P

    2009-10-01

    A major focus on critical care medicine concerns the institution of life-support therapies, such as mechanical ventilation, during periods of organ failure to permit a window of opportunity to diagnose and treat underlying disorders so that patients may be returned to their prior functional status upon recovery. With the growing success of these intensive care unit-based therapies and longer-term follow-up of patients, severe weakness involving the peripheral nervous system and muscles has been identified in many recovering patients, often confounding the time course or magnitude of recovery. Mechanical ventilation is often accompanied by pharmacologic treatments including analgesics, sedatives, and neuromuscular blockers. These drugs and the encephalopathies accompanying some forms of critical illness result in a high prevalence of delirium in mechanically ventilated patients. These drug effects likely contribute to an impaired ability to assess the magnitude of intensive care unit-acquired weakness, to additional time spent immobilized and mechanically ventilated, and to additional weakness from the patient's relative immobility and bedridden state. This review surveys recent literature documenting these relationships and identifying approaches to minimize pharmacologic contributions to intensive care unit-acquired weakness.

  2. Nociceptive flexion reflexes during analgesic neurostimulation in man.

    Science.gov (United States)

    García-Larrea, L; Sindou, M; Mauguière, F

    1989-11-01

    Nociceptive flexion reflexes of the lower limbs (RIII responses) have been studied in 21 patients undergoing either epidural (DCS, n = 16) or transcutaneous (TENS, n = 5) analgesic neurostimulation (AN) for chronic intractable pain. Flexion reflex RIII was depressed or suppressed by AN in 11 patients (52.4%), while no modification was observed in 9 cases and a paradoxical increase during AN was evidenced in 1 case. In all but 2 patients, RIII changes were rapidly reversible after AN interruption. RIII depression was significantly associated with subjective pain relief, as assessed by conventional self-rating; moreover, in 2 patients it was possible to ameliorate the pain-suppressing effects of AN by selecting those stimulation parameters (intensity and frequency) that maximally depressed nociceptive reflex RIII. We recorded 2 cases of RIII attenuation after contralateral neurostimulation. AN appeared to affect nociceptive reflexes rather selectively, with no or very little effect on other cutaneous, non-nociceptive responses. Recording of RIII reflexes is relatively simple to implement as a routine paraclinical procedure. It facilitates the objective assessment of AN efficacy and may help to choose the most appropriate parameters of neurostimulation. In addition, RIII behavior in patients could be relevant to the understanding of some of the mechanisms involved in AN-induced pain relief.

  3. Increasing intensity of TENS prevents analgesic tolerance in rats

    Science.gov (United States)

    Sato, Karina L.; Sanada, Luciana S.; Rakel, Barbara A.; Sluka, Kathleen A.

    2012-01-01

    Transcutaneous electrical nerve stimulation (TENS) reduces hyperalgesia and pain. Both low frequency (LF) and high frequency (HF) TENS, delivered at the same intensity (90% motor threshold (MT)) daily, result in analgesic tolerance with repeated use by the 5th day of treatment. Thecurrentstudytestedif 1) increasingintensityby 10% per daypreventsthedevelopmentoftolerance to repeated TENS, and 2) iflowerintensity TENS (50 % MT) produces an equivalentreduction in hyperalgesia when compared to 90% MT TENS. Sprague-Dawley rats with unilateral knee joint inflammation (3% carrageenan) were separated according to the intensity of TENS used: Sham, 50% LF, 50% HF, 90% LF, 90% HF, and increased intensity by 10% per day (LF and HF). The reduced mechanical withdrawal threshold following the induction of inflammation was reversed by application of TENS applied at 90% MT and increasing intensity for the first 4 days. On the 5th day, the groups that received 90% MT intensity showed tolerance. Nevertheless, the group that received an increased intensity on each day still showed a reversal of the mechanical withdrawal threshold with TENS. These results show that the development of tolerance can be delayed by increasing intensity of TENS. PMID:22858165

  4. Can anaesthetic and analgesic techniques affect cancer recurrence or metastasis?

    LENUS (Irish Health Repository)

    Heaney, A

    2012-12-01

    Summary Cancer is a leading cause of morbidity and mortality worldwide and the ratio of incidence is increasing. Mortality usually results from recurrence or metastases. Surgical removal of the primary tumour is the mainstay of treatment, but this is associated with inadvertent dispersal of neoplastic cells into the blood and lymphatic systems. The fate of the dispersed cells depends on the balance of perioperative factors promoting tumour survival and growth (including surgery per se, many anaesthetics per se, acute postoperative pain, and opioid analgesics) together with the perioperative immune status of the patient. Available evidence from experimental cell culture and live animal data on these factors are summarized, together with clinical evidence from retrospective studies. Taken together, current data are sufficient only to generate a hypothesis that an anaesthetic technique during primary cancer surgery could affect recurrence or metastases, but a causal link can only be proved by prospective, randomized, clinical trials. Many are ongoing, but definitive results might not emerge for a further 5 yr or longer. Meanwhile, there is no hard evidence to support altering anaesthetic technique in cancer patients, pending the outcome of the ongoing clinical trials.

  5. Opioid Analgesics and Nicotine: More Than Blowing Smoke.

    Science.gov (United States)

    Yoon, Jin H; Lane, Scott D; Weaver, Michael F

    2015-09-01

    Practitioners are highly likely to encounter patients with concurrent use of nicotine products and opioid analgesics. Smokers present with more severe and extended chronic pain outcomes and have a higher frequency of prescription opioid use. Current tobacco smoking is a strong predictor of risk for nonmedical use of prescription opioids. Opioid and nicotinic-cholinergic neurotransmitter systems interact in important ways to modulate opioid and nicotine effects: dopamine release induced by nicotine is dependent on facilitation by the opioid system, and the nicotinic-acetylcholine system modulates self-administration of several classes of abused drugs-including opioids. Nicotine can serve as a prime for the use of other drugs, which in the case of the opioid system may be bidirectional. Opioids and compounds in tobacco, including nicotine, are metabolized by the cytochrome P450 enzyme system, but the metabolism of opioids and tobacco products can be complicated. Accordingly, drug interactions are possible but not always clear. Because of these issues, asking about nicotine use in patients taking opioids for pain is recommended. When assessing patient tobacco use, practitioners should also obtain information on products other than cigarettes, such as cigars, pipes, smokeless tobacco, and electronic nicotine delivery systems (ENDS, or e-cigarettes). There are multiple forms of behavioral therapy and pharmacotherapy available to assist patients with smoking cessation, and opioid agonist maintenance and pain clinics represent underutilized opportunities for nicotine intervention programs.

  6. Multisteric TRPV1 nocisensor: a target for analgesics.

    Science.gov (United States)

    Szolcsányi, János; Sándor, Zoltán

    2012-12-01

    Cloning of the transient receptor potential vanilloid type 1 (TRPV1), the heat-gated cation channel/capsaicin receptor expressed by sensory neurons, has opened the door for development of new types of analgesics that selectively act on nociceptors. Here we summarize mutagenetic evidence for selective loss of responsiveness to vanilloids, protons, and heat stimuli to provide clues for avoiding on-target side effects of hyperthermia and burn risk. It is suggested that the complex chemoceptive thermosensor function of TRPV1 (which is modulated by depolarizing stimuli) can be attributed to multisteric gating functions. In this way, it forms the prototype of a new class of ion channels different from the canonical voltage-gated and ligand-gated ones. Several endogenous lipid ligands activate and inhibit TRPV1 and its gating initiates sensory transducer and mediator-releasing functions. Second generation TRPV1 antagonists that do not induce hyperthermia are under development, and a dermal capsaicin patch is already on the market for long-term treatment of neuropathic pain. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Analgesic and anti-inflammatory activity of root bark of Grewia asiatica Linn. in rodents

    Directory of Open Access Journals (Sweden)

    Udaybhan Singh Paviaya

    2013-01-01

    Conclusions: The present study indicates that root bark of G. asiatica exhibits peripheral and central analgesic effect and anti-inflammatory activity, which may be attributed to the various phytochemicals present in root bark of G. asiatica.

  8. Studies on anti-ulcer, analgesic and antipyretic properties of the ...

    African Journals Online (AJOL)

    ulcer, analgesic and anti pyretic activities in rats and mice. Ethanol-induced gastric ulceration, acetic acid-induced writhing and formalin-induced nociception were used. Yeast-induced hyperpyrexia was used to investigate the antipyretic activity.

  9. Screening of Bauhinia purpurea Linn. for analgesic and anti-inflammatory activities

    Science.gov (United States)

    Shreedhara, C.S.; Vaidya, V.P.; Vagdevi, H.M.; Latha, K.P.; Muralikrishna, K.S.; Krupanidhi, A.M.

    2009-01-01

    Objectives: Ethanol extract of the stem of Bauhinia purpurea Linn. was subjected to analgesic and anti-inflammatory activities in animal models. Materials and Methods: Albino Wistar rats and mice were the experimental animals respectively. Different CNS depressant paradigms like analgesic activity (determined by Eddy's hot plate method and acetic acid writhing method) and anti-inflammatory activity determined by carrageenan induced paw edema using plethysmometer in albino rats) were carried out, following the intra-peritoneal administration of ethanol extract of Bauhinia purpurea Linn. (BP) at the dose level of 50 mg/kg and 100 mg/kg. Results: The analgesic and anti-inflammatory activities of ethanol extracts of BP were significant (P Bauhinia purpurea has shown significant analgesic and anti-inflammatory activities at the dose of 100 mg/kg and was comparable with corresponding standard drugs. The activity was attributed to the presence of phytoconstituents in the tested extract. PMID:20336222

  10. Studies on anti-ulcer, analgesic and antipyretic properties of the ...

    African Journals Online (AJOL)

    STORAGESEVER

    2010-03-15

    Mar 15, 2010 ... Yeast-induced hyperpyrexia was used to investigate the antipyretic ... be important in establishing a pharmacological basis for some of the ..... Koster R, Anderson M, De Beer EJ (1959) Acetic acid for analgesic screening.

  11. The evidence of neuraxial administration of analgesics for cancer-related pain

    DEFF Research Database (Denmark)

    Kurita, G P; Benthien, K S; Nordly, M

    2015-01-01

    related to cancer, pain, neuraxial route, analgesic and side effects. The search was performed in PubMed, EMBASE, and Cochrane for the period until February 2014. Studies were analysed according to methods, results, quality of evidence, and strength of recommendation. RESULTS: The number of abstracts...... retrieved was 2147, and 84 articles were selected for full reading. The final selection comprised nine articles regarding randomised controlled trials (RCTs) divided in four groups: neuraxial combinations of opioid and adjuvant analgesic compared with neuraxial administration of opioid alone (n = 4); single...... neuraxial drug in bolus compared with continuous administration (n = 2); single neuraxial drug compared with neuraxial placebo (n = 1); and neuraxial opioid combined with or without adjuvant analgesic compared with other comprehensive medical management than neuraxial analgesics (n = 2). The RCTs presented...

  12. The effect of whole body irradiation on the action of strong analgesics of mice

    International Nuclear Information System (INIS)

    Cvetkovicj, M.; Milovanovicj, A.; Tanasijevicj, D.

    1987-01-01

    The effect of whole body irradiation of male mice with single doses of 3 and 7 Gy ( 60 Co source) on analgesic action of three morphine-like drugs was studied. Over the first 6 days after irradiation, the analgesic effect of alfentanil and fentanyl was significantly less pronounced in irradiated animals than in control ones. During the subsequent period of 24 days till the end of experiment, the analgesic effect in irradiated animals gradually increased reaching and exceeding the control values. On the contrary, the analgesic effect of butorphanole was less pronounced in irradiated animals than in control ones, although the difference was not significantly. The difference between butorphanole and other two drugs are probably due to chemical structure and the metabolic fate in the body. (author) 8 refs.; 2 figs

  13. Screening of Ficus religiosa leaves fractions for analgesic and anti-inflammatory activities

    OpenAIRE

    Gulecha, Vishal; Sivakumar, T; Upaganlawar, Aman; Mahajan, Manoj; Upasani, Chandrashekhar

    2011-01-01

    Objective : To evaluate the different fractions of dried leaves of Ficus religiosa Linn for analgesic and anti-inflammatory activity using different models of pain and inflammation Materials and Methods : The analgesic activity of F. religiosa carried out using acetic acid-induced writhing in mice and tail flick test in rats. The anti-inflammatory activity was evaluated using carrageenan-induced rat paw edema and cotton pellet-granuloma formation in rats. Five different fractions (FRI, FR...

  14. Development of Novel Local Analgesics for Management of Acute Tissue Injury Pain

    Science.gov (United States)

    2017-09-01

    Project Manager Boston Biomedical Innovation Center 215 First Street, Suite 500; Cambridge, MA 02142 857-307-2441 | rblackman1@partners.org | b...AWARD NUMBER: W81XWH-15-1-0480 TITLE: Development of Novel Local Analgesics for Management of Acute Tissue Injury Pain PRINCIPAL...31/2017 4. TITLE AND SUBTITLE Development of Novel Local Analgesics for Management of Acute Tissue Injury Pain 5a. CONTRACT NUMBER Tissue Injury

  15. National consumption of opioid and nonopioid analgesics in Croatia: 2007–2013

    Science.gov (United States)

    Krnic, Darko; Anic-Matic, Andrea; Dosenovic, Svjetlana; Draganic, Pero; Zezelic, Sasa; Puljak, Livia

    2015-01-01

    Background The increased consumption of analgesics has been documented worldwide during the last 2 decades. The aim of the study was to examine the trends in opioid and nonopioid analgesic consumption in Croatia between 2007 and 2013. Methods Data on opioid consumption were extracted from the database of the national authority. All opioid and nonopioid analgesics were included in the analysis. Data were presented as defined daily doses per 1,000 inhabitants per day. Adequacy of opioid consumption was calculated using adequacy of consumption measure. Results During the examined 7-year period, the total consumption and total cost of all analgesics in Croatia showed continuous increase. In the M01A group (anti-inflammatory and antirheumatic products, nonsteroids), ibuprofen had an exponential increasing trend, and in 2011, it overtook diclofenac consumption. Ibuprofen and diclofenac had the highest consumption also in the M02A group of topical products for joint and muscular pain. Tramadol was by far the most consumed type of opioids (N02A group) and paracetamol in the group of other analgesics and antipyretics (N02B). The adequacy of consumption measure value was 0.19, indicating that Croatia is a country with a low opioid consumption. Conclusion Between 2007 and 2013, both consumption of analgesics and their cost in Croatia had an increasing trend. Comparisons with data from other countries, based on the published literature, indicate that analgesic consumption in Croatia is still relatively low. Calculation of the adequacy of opioid consumption indicated that Croatia is a country with low opioid consumption. Further studies are necessary for establishing whether current analgesic consumption in Croatia corresponds to patient needs. PMID:26357478

  16. Association of Maternal Self-Medication and Over-the-Counter Analgesics for Children

    DEFF Research Database (Denmark)

    Jensen, Janne Fangel; Gottschau, Mathilde; Siersma, Volkert Dirk

    2014-01-01

    Self-medication with over-the-counter (OTC) analgesics, such as paracetamol (PCM), among children and adolescents is increasing and constitutes an important public health issue internationally. Reasons for this development are unclear; parental influence is suggested. Our objective was to examine...... whether self-medication with OTC analgesics among school-aged children is influenced by maternal self-reported health and medicine use, taking the child's frequency of pain into account....

  17. Comparative study of the analgesic efficacy of rectal tramadol versus intravenous tramadol for adult tonsillectomy

    OpenAIRE

    Gadani, Hina N.; Chaudhary, Virendra Pratap

    2010-01-01

    Background: The optimal method for intra- and post-operative analgesia for adult tonsillectomy is uncertain. Tramadol hydrochloride is an analgesic with mixed mu and nonopioid activities, having less/no respiratory depression. Aim: The aim of our study was to compare the analgesic efficacy and nausea/vomiting produced by tramadol via intravenous and rectal administration during the first 24 h after anesthesia for adult tonsillectomy. Materials and Methods: The study design was prospective, ra...

  18. PolyMorphine provides extended analgesic-like effects in mice with spared nerve injury

    OpenAIRE

    Lax, Neil C; Chen, Renxun; Leep, Sarah R; Uhrich, Kathryn E; Yu, Lei; Kolber, Benedict J

    2017-01-01

    Morphine is a well-characterized and effective analgesic commonly used to provide pain relief to patients suffering from both acute and chronic pain conditions. Despite its widespread use and effectiveness, one of the major drawbacks of morphine is its relatively short half-life of approximately 4 h. This short half-life often necessitates multiple administrations of the drug each day, which may contribute to both dependence and tolerance to morphine. Here, we tested the analgesic properties ...

  19. Pattern of self-medication with analgesics among Iranian University students in central Iran

    Directory of Open Access Journals (Sweden)

    Shadi Sarahroodi

    2012-01-01

    Full Text Available Background: Self-medication is defined as the use of drugs for the treatment of self-diagnosed disorders. It is influenced by factors such as education, family, society, law, availability of drugs and exposure to advertisements. This study was performed to evaluate self-medication with analgesics and its pattern among different groups of Iranian University Students. Materials and Methods: A randomized, cross-sectional, multicenter study was conducted from December 2009 to February 2010. The target population of this study was 564 students out of 10,000 students attending four medical and non-medical science universities in Qom state. Data was analyzed using SPSS version 16, and analysis was conducted with descriptive analysis procedures. Results: 76.6% of the students had used analgesics in self-medication in the previous 3 months. The frequency of analgesic use in the study period was once in 19.2% of the participants, twice in 22.2%, three times in 16.3% and more than three times in 35.5% of the participants, although 6.8% of them were not sure when they were used. Of all the respondents, 49.8% reported headache as the problem. This was the most common problem, after which came Dysmenorrhea,headache and stomach ache. Bone and joint pains were other problems that led to the use of analgesics. The most commonly used source of information for self-medication with analgesics was advice from friends and family (54.7%, previously prescribed medications (30.1%, their medical knowledge (13.3% and recommendation of a pharmacist (1.9%. Conclusion: Self-medication with analgesics is very high among Iranian students in Qom city. This could be an index for other parts of the Iranian community. Because the source of information about analgesics is inappropriate, we would recommend education courses about analgesics and self-medication on the radio and television for the entire population.

  20. Synthesis and Analgesic Activity of Novel Derivatives of 1,2-Substituted Benzimidazoles

    Directory of Open Access Journals (Sweden)

    Shobhit Srivastava

    2013-01-01

    Full Text Available A series of novel 2-phenylhydrazinomethyl and 2-(2-hydroxyphenyl-benzimidazole derivatives substituted at the N1-position of benzimidazole nucleus were synthesized as well as screened for analgesic activity. Some of these compounds showed promising analgesic activity when compared with the standard drug diclofenac sodium. The incorporation of a phenylhydrazinomethyl nucleus at 2-position of benzimidazole compound gave a biologically active pharmacophore.

  1. Evaluation of the Analgesic Activity of the Methanolic Stem Bark Extract of Dialium Guineense (Wild)

    OpenAIRE

    Ezeja, MI; Omeh, YS; Ezeigbo, II; Ekechukwu, A

    2011-01-01

    Background: Dialium guineense is a medicinal plant used by some communities of Enugu-Ezike in Enugu State, Nigeria for treatment of fever, headache and other diverse ailments. Objectives: The present study evaluated the analgesic activity of the methanolic stem bark extract of the plant. Method: Acetic acid-induced abdominal constriction or writhing, tail immersion and hot plate analgesic models in albino Wistar mice were used for the study. Three test doses (250, 500, 1000 mg/kg body weight)...

  2. BacMam Virus Transduced Cardiomyoblasts Can Be Used for Myocardial Transplantation Using AP-PEG-A Microcapsules: Molecular Cloning, Preparation, and In Vitro Analysis

    Directory of Open Access Journals (Sweden)

    Arghya Paul

    2010-01-01

    Full Text Available The potential of genetically modified cardiomyoblasts in treating damaged myocardium is well known. However, efficient delivery of these cells is of major concern during treatment. The limiting factors are the massive cell death that occurs soon after their intramyocardial transplantation into the beating heart. To address these problems, we generated recombinant baculoviruses (BacMam viruses which efficiently transduced cardiomyoblast cells under optimized conditions. These genetically modified cells were then protected in a new polymeric microcapsule using poly-ethylene-glycol (PEG, alginate, and poly-L-lysine (PLL polymers for efficient delivery. Results showed that microcapsules maintain cell viability and support cell proliferation for at least 30 days. The capsules exhibit strong immunoprotective potential and have high mechanical and osmotic stability with more than 70% intact capsules. The encased transduced cells showed a rapid transgene expression inside the capsule for at least 15 days. However, preclinical studies are needed to further explore its long-term functional benefits.

  3. BacMam virus transduced cardiomyoblasts can be used for myocardial transplantation using AP-PEG-A microcapsules: molecular cloning, preparation, and in vitro analysis.

    Science.gov (United States)

    Paul, Arghya; Khan, Afshan Afsar; Shum-Tim, Dominique; Prakash, Satya

    2010-01-01

    The potential of genetically modified cardiomyoblasts in treating damaged myocardium is well known. However, efficient delivery of these cells is of major concern during treatment. The limiting factors are the massive cell death that occurs soon after their intramyocardial transplantation into the beating heart. To address these problems, we generated recombinant baculoviruses (BacMam viruses) which efficiently transduced cardiomyoblast cells under optimized conditions. These genetically modified cells were then protected in a new polymeric microcapsule using poly-ethylene-glycol (PEG), alginate, and poly-L-lysine (PLL) polymers for efficient delivery. Results showed that microcapsules maintain cell viability and support cell proliferation for at least 30 days. The capsules exhibit strong immunoprotective potential and have high mechanical and osmotic stability with more than 70% intact capsules. The encased transduced cells showed a rapid transgene expression inside the capsule for at least 15 days. However, preclinical studies are needed to further explore its long-term functional benefits.

  4. Analgesic efficacy of preoperative dexketoprofen trometamol: A systematic review and meta-analysis.

    Science.gov (United States)

    Esparza-Villalpando, Vicente; Pozos-Guillén, Amaury; Masuoka-Ito, David; Gaitán-Fonseca, César; Chavarría-Bolaños, Daniel

    2018-03-01

    Post-Market Research Clinical evidence supports the use of dexketoprofen trometamol (DEX) to manage acute postoperative pain. However, controversies surround the impact of the use of this drug in preoperative analgesic protocols. The aim of the present meta-analysis was to evaluate the effectiveness of the preoperative administration of DEX under postoperative pain conditions. Electronic and manual searches were conducted through diverse electronic databases. A systematic review and meta-analysis to evaluate the analgesic efficacy of the preoperative administration of DEX was performed including Randomized Clinical Trials (RCTs) published between 2002 and 2017. Suitable individual studies were evaluated through a quality system, and the data were extracted and analyzed. Fourteen RTCs were included (12 parallel trials and 2 cross-over trials), published in the English and Turkish languages. Follow-up periods ranged from 4, 6, 8, 24, and 48 hr. All trials measured the outcome result as Acute Pain Level (APL) (VAS, NRS, VRS), time to requiring a second dose of DEX or analgesic emergency and consumption of opioids via patient-controlled analgesia. When the comparators were other drugs - paracetamol, Lornoxicam or placebo during the preoperative time, preoperative administration of DEX was superior. When the comparison comprised preoperative and postoperative DEX, both alternatives exhibited comparable analgesic effects. The analgesic efficacy of the preoperative administration of DEX when compared to placebo, lornoxicam, and paracetamol on postoperative pain was evident. Preoperative administration of DEX compared to its immediate postoperative administration showed a similar analgesic effect. © 2017 Wiley Periodicals, Inc.

  5. Post-marketing withdrawal of analgesic medications because of adverse drug reactions: a systematic review.

    Science.gov (United States)

    Onakpoya, Igho J; Heneghan, Carl J; Aronson, Jeffrey K

    2018-01-01

    Many analgesics have been withdrawn from the market because of adverse drug reactions. Controversy still surrounds the use of some approved analgesics for pain management. However, the trends and reasons for withdrawal of analgesics when harms are attributed to their use have not been systematically assessed. Areas covered: We conducted searches in PubMed; Embase; Google Scholar; clinicaltrials.gov; WHO databases of withdrawn products; websites of the European Medicines Agency, the US Food and Drug Administration, the UK Medicines and Healthcare products Regulatory Agency; Meyler's Side Effects of Drugs; Stephens' Detection of New Adverse Drug Reactions; the Pharmaceutical Manufacturing Encyclopedia; and the Merck Index. We included licensed analgesics that were withdrawn after marketing because of adverse reactions between 1950 and March 2017. We excluded herbal products, non-human medicines, and non-prescription medicines. We used the Oxford Centre for Evidence Based Medicine criteria to document the levels of evidence, and chi-squared tests to compare withdrawal patterns across geographical regions. Expert opinion: Pharmacovigilance systems in low-resource settings should be strengthened. Greater co-ordination across regulatory authorities in assessing and interpreting the benefit-harm balance of new analgesics should be encouraged. Future reporting of harms in clinical trials of analgesics should follow standardized guidelines.

  6. Screening of Alkaloidal Fraction of Conium maculatum L. Aerial Parts for Analgesic and Antiinflammatory Activity.

    Science.gov (United States)

    Madaan, Reecha; Kumar, S

    2012-09-01

    Conium maculatum Linn. (Umbelliferae) has been traditionally used in the treatment of spasmodic disorders, and to relieve nervous excitation, rheumatic pains in the old and feeble, pain in stomach, pain of gastric ulcer, nervousness and restlessness. Alkaloids have long been considered as bioactive group of constituents present in C. maculatum. Despite a long tradition of use, C. maculatum has not been evaluated pharmacologically to validate its traditional claims for analgesic and antiinflammatory activities. Thus, the present investigations were undertaken with an objective to evaluate alkaloidal fraction of C. maculatum aerial parts for analgesic and antiinflammatory activities. Test doses (100 or 200 mg/kg, p.o.) of alkaloidal fraction were evaluated for analgesic activity using tail flick test and antiinflammatory activity using carrageenan-induced paw oedema test in rats. Morphine (5 mg/kg, p.o.) and indomethacin (5 mg/kg, p.o.) were used as standard analgesic and antiinflammatory drugs, respectively. Alkaloidal fraction of the plant exhibited significant analgesic activity at a dose of 200 mg/kg as it showed significant increase in tail flicking reaction time with respect to the control during 2 h intervals of observation. It also exhibited significant antiinflammatory activity at a dose of 200 mg/kg as it inhibited paw oedema in rats to 71% and reduced the paw volume one-fourth to the control during 1(st) h of the study. The present investigations suggest that alkaloids are responsible for analgesic and antiinflammatory activities of C. maculatum.

  7. Analgesic effects of various extracts of the root of Abutilon indicum linn

    Directory of Open Access Journals (Sweden)

    Naveen Goyal

    2009-01-01

    Full Text Available Purpose : Abutilon indicum (Linn. sweet (Malvaceae commonly called ′Country Mallow′ is a perennial plant up to 3 m in height. It is abundantly found as a weed in the sub-Himalayan tract and in the hotter parts of India. The plant is traditionally used for treatment of several diseases like bronchitis, body ache, toothache, jaundice, diabetes, fever, piles, leprosy, ulcers, cystitis, gonorrhea, diarrhea, and so on. Abutilon indicum Linn. is reported to have hepatoprotective, hypoglycemic, antimicrobial, male contraceptive, and antidiarrheal activities. The present study was done to evaluate the analgesic potential of various extracts of the root of Abutilon indicum Linn. Materials and Methods : The powdered root (900 g was subjected to successive solvent extraction, with solvents in increasing order of polarity, namely, petroleum ether (60 - 80΀C, methanol, and ethanol, using the soxhlet apparatus for 72 hours. The marc was extracted by cold maceration for 72 hours, to obtain a water-soluble extract. The peripheral analgesic activity was studied using acetic acid-induced writhing method in Swiss albino mice (20 - 30 g, while the central analgesic activity was evaluated by the tail flick method and the tail immersion method. Results : Results indicated that all the tested extracts, except the methanol extract, exhibited significant analgesic activity in both animals′ models. Petroleum ether extract showed higher analgesic activity. The activity may be related to the central mechanism or may be due to the peripheral analgesic mechanisms. Conclusion : The present study authenticates the traditional use.

  8. The availability of prescription-only analgesics purchased from the internet in the UK.

    Science.gov (United States)

    Raine, Connie; Webb, David J; Maxwell, Simon R J

    2009-02-01

    Increasing numbers of people are accessing medicines from the internet. This online market is poorly regulated and represents a potential threat to the health of patients and members of the public. Prescription-only analgesics, including controlled opioids, are readily available to the UK public through internet pharmacies that are easily identified by popular search engines. The majority of websites do not require the customer to possess a valid prescription for the drug. Less than half provide an online health screen to assess suitability for supply. The majority have no registered geographical location. Analgesic medicines are usually purchased at prices significantly above British National Formulary prices and are often supplied in large quantities. These findings are of particular relevance to pain-management specialists who are trying to improve the rational use of analgesic drugs. To explore the availability to the UK population of prescription-only analgesics from the internet. Websites were identified by using several keywords in the most popular internet search engines. From 2000 websites, details of 96 were entered into a database. Forty-six (48%) websites sold prescription analgesics, including seven opioids, two non-opioids and 18 nonsteroidal anti-inflammatory drugs. Thirty-five (76%) of these did not require the customer to possess a valid prescription. Prescription-only analgesics, including controlled opioids, are readily available from internet websites, often without a valid prescription.

  9. KARAKTERISTIK MIKROKAPSUL MINYAK KAYA ASAM LEMAK OMEGA-3 DARI HASIL SAMPING PENEPUNGAN LEMURU [Characteristics of Microcapsule of omega-3 Fatty Acids Enriched Oil from Lemuru Meal Processing

    Directory of Open Access Journals (Sweden)

    Teti Estiasih 1

    2008-12-01

    Full Text Available Omega-3 fatty acids enriched fish oil from lemuru fishmeal processing met the quality standard of food grade fish oil, but it was susceptible to oxidation. Microencapsulation by spray drying was one method that could protect this oil against oxidation and the microcapsule could be applied more widely and easier to handle. The important factor that affected microencapsulation process by spray drying method was encapsulant to core ratio. The objective of research was to elucidate the effect of encapsulant to core ratio (2:1; 3:1; 4:1; 5:1; and 6:1 (w/w on characteristics of omega-3 fatty acids enriched fish oil microcapsule. The increase of microencapsulation efficiency and the decrease of surface oil proportion were related to better emulsion stability prior to spray drying and film forming ability around oil globule as the sodium caseinate proportion increased. Emulsification and heating during spray drying could induce hydrolysis of triglycerides in fish oil. Therefore, the quantity of free fatty acids relatively unchanged although the proportion of encapsulated oil decreased. The decrease of oxidation degree is caused by better protective effect of sodium caseinate during emulsification and spray drying due to better film forming ability as proportion of encapsulant increased. However, it was followed by the decrease of omega-3 fatty acids content that related to decreasing proportion of fish oil. This phenomenon was supported by unchanging omega-3 fatty acids retention that showed protective effect of sodium caseinate on oxidation during microencapsulation. Different encapsulant to core ratio did not change yield of microcapsule. Different proportion of surface oil did not affect microcapsule recovery.

  10. Physical and Bioengineering Properties of Polyvinyl Alcohol Lens-Shaped Particles Versus Spherical Polyelectrolyte Complex Microcapsules as Immobilisation Matrices for a Whole-Cell Baeyer–Villiger Monooxygenase

    Czech Academy of Sciences Publication Activity Database

    Schenkmayerová, A.; Bučko, M.; Gemeiner, P.; Treľová, D.; Lacík, I.; Chorvát Jr., D.; Ačai, P.; Polakovič, M.; Lipták, L.; Rebroš, M.; Rosenberg, M.; Štefuca, V.; Neděla, Vilém; Tihlaříková, Eva

    2014-01-01

    Roč. 174, č. 5 (2014), s. 1834-1849 ISSN 0273-2289 R&D Projects: GA ČR(CZ) GA14-22777S Institutional support: RVO:68081731 Keywords : polyelectrolyte complex microcapsules * LentiKats * confocal laser scanning microscopy * inverse size exclusion chromatography * environmental scanning electron microscopy * Baeyer–Villiger biooxidation Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.735, year: 2014

  11. Radioimmunoassay for 6-D-tryptophan analog of luteinizing hormone-releasing hormone: measurement of serum levels after administration of long-acting microcapsule formulations

    International Nuclear Information System (INIS)

    Mason-Garcia, M.; Vigh, S.; Comaru-Schally, A.M.; Redding, T.W.; Somogyvari-Vigh, A.; Horvath, J.; Schally, A.V.

    1985-01-01

    A sensitive and specific radioimmunoassay for [6-D-tryptophan]luteinizing hormone-releasing hormone ([D-Trp 6 ]LH-RH) was developed and used for following the rate of liberation of [D-Trp 6 ]LH-RH from a long-acting delivery systems based on a microcapsule formulation. Rabbit antibodies were generated against [D-Trp 6 ]LH-RH conjugated to bovine serum albumin with glutaraldehyde. Crossreactivity with LH-RH was less than 1%; there was no significant cross-reactivity with other peptides. The minimal detectable dose of [D-Trp 6 ]LH-RH was 2 pg per tube. In tra- and interassay coefficients of variation were 8% and 10%, respectively. The radioimmunoassay was suitable for direct determination of [D-Trp 6 ]LH-RH in serum, permitting the study of blood levels of the analog after single injections into normal men and after one-a-month administration of microcapsules to rats. In men, 90 min after subcutaneous injection of 250 μg of the peptide, serum [D-Trp 6 ]LH-RH rose to 6-12 ng/ml. Luteinizing hormone was increased 90 min and 24 hr after the administration of the analog. Several batches of microcapsules were tested in rats and the rate of release of [D-Trp 6 ]LH-RH was followed. The improved batch of microcapsules of [D-Trp 6 ]LH-RH increased serum concentrations of the analog for 30 days or longer after intramuscular injection

  12. Fabrication of Covalently Crosslinked and Amine-Reactive Microcapsules by Reactive Layer-by-Layer Assembly of Azlactone-Containing Polymer Multilayers on Sacrificial Microparticle Templates

    Science.gov (United States)

    Saurer, Eric M.; Flessner, Ryan M.; Buck, Maren E.; Lynn, David M.

    2011-01-01

    We report on the fabrication of covalently crosslinked and amine-reactive hollow microcapsules using ‘reactive’ layer-by-layer assembly to deposit thin polymer films on sacrificial microparticle templates. Our approach is based on the alternating deposition of layers of a synthetic polyamine and a polymer containing reactive azlactone functionality. Multilayered films composed of branched poly(ethylene imine) (BPEI) and poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) were fabricated layer-by-layer on the surfaces of calcium carbonate and glass microparticle templates. After fabrication, these films contained residual azlactone functionality that was accessible for reaction with amine-containing molecules. Dissolution of the calcium carbonate or glass cores using aqueous ethylenediamine tetraacetic acid (EDTA) or hydrofluoric acid (HF), respectively, led to the formation of hollow polymer microcapsules. These microcapsules were robust enough to encapsulate and retain a model macromolecule (FITC-dextran) and were stable for at least 22 hours in high ionic strength environments, in low and high pH solutions, and in several common organic solvents. Significant differences in the behaviors of capsules fabricated on CaCO3 and glass cores were observed and characterized using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Whereas capsules fabricated on CaCO3 templates collapsed upon drying, capsules fabricated on glass templates remained rigid and spherical. Characterization using EDS suggested that this latter behavior results, at least in part, from the presence of insoluble metal fluoride salts that are trapped or precipitate within the walls of capsules after etching of the glass cores using HF. Our results demonstrate that the assembly of BPEI/PVDMA films on sacrificial templates can be used to fabricate reactive microcapsules of potential use in a wide range of fields, including catalysis, drug and gene delivery, imaging, and

  13. Microencapsulation of butyl stearate with melamine-formaldehyde resin: Effect of decreasing the pH value on the composition and thermal stability of microcapsules

    Directory of Open Access Journals (Sweden)

    M. Krajnc

    2012-10-01

    Full Text Available The object of this study was to investigate how different decreasing of pH regimes during microencapsulation process with melamine-formaldehyde (MF resin affects the composition, morphology and thermal stability of microcapsules containing a phase-change material (PCM. Technical butyl stearate was used as PCM. Microencapsulation was carried out at 70°C. For all experiments the starting pH value was 6.0. After one hour of microencapsulation at the starting pH value, the pH value was lowered to final pH value (5.5; 5.0; 4.5 in a stepwise or linear way. The properties of microcapsules were monitored during and after the microencapsulation process. The results showed that pH value decreasing regime was critical for the morphology and stability of microcapsules. During microencapsulations with a stepwise decrease of pH value we observed faster increase of the amount of MF resin in the microencapsulation product compared to the microencapsulations with a linear pH value decrease. However, faster deposition in the case of microencapsulations with stepwise decrease of pH value did not result in thicker MF shells. The shell thickness increased much faster when the pH value was decreased in a linear way or in several smaller steps. It was shown that for the best thermal stability of microcapsules, the pH value during microencapsulation had to be lowered in a linear way or in smaller steps to 5.0 or lower.

  14. Process for the production of a pressure-sensitive carbonless copy sheet using microcapsules formed in situ in a radiation curable binder

    International Nuclear Information System (INIS)

    Lee, Y.S.; Shackle, D.R.

    1978-01-01

    A process is provided for the production of a coating composition containing microcapsules having a hydrophilic core for use in the manufacture of pressure-sensitive carbonless transfer papers comprising the following steps. A hydrophilic emulsion component is prepared by dispersing at least one chromogenic material being soluble in the hydrophilic liquid. A hydrophobic emulsion component is prepared by dispersing an emulsifier in a radiation curable hydrophobic liquid. A first wall-forming material and a second wall-forming material are added to the hydrophobic emulsion component, with mixing. The first and second wall-forming materials are soluble in the hydrophobic emulsion component, and the first wall-forming material is reactive with the second wall-forming material to form a polymeric capsule wall. The resultant polymeric capsule wall is substantially insoluble in the hydrophilic and the hydrophobic emulsion components. The hydrophobic emulsion component is mixed together with the hydrophilic emulsion component to form an emulsion containing droplets of the hydrophilic emulsion component dispersed in the hydrophobic emulsion component. Mixing is maintained for a period of time sufficient to allow the first and second wall-forming materials to react to form a dispersion of microcapsules in the hydrophobic emulsion component. The formed microcapsules have capsule walls substantially impermeable to the hydrophobic and the hydrophilic emulsion components. Pressure-sensitive carbonless transfer paper may be produced by applying the despersion of the microcapsules prepared as above to a substrate,and curing the dispersion by subjecting the dispersion on the substrate to radiation for a period of time sufficient to cure the radiation curable hydrophobic liquid, thereby producing a tack-free, resinous film on the substrate

  15. A combined interfacial and in-situ polymerization strategy to construct well-defined core-shell epoxy-containing SiO2-based microcapsules with high encapsulation loading, super thermal stability and nonpolar solvent tolerance

    Directory of Open Access Journals (Sweden)

    Yin Jia

    2016-10-01

    Full Text Available SiO2-based microcapsules containing hydrophobic molecules exhibited potential applications such as extrinsic self-healing, drug delivery, due to outstanding thermal and chemical stability of SiO2. However, to construct SiO2-based microcapsules with both high encapsulation loading and long-term structural stability is still a troublesome issue, limiting their further utilization. We herein design a single-batch route, a combined interfacial and in-situ polymerization strategy, to fabricate epoxy-containing SiO2-based microcapsules with both high encapsulation loading and long-term structural stability. The final SiO2-based microcapsules preserve high encapsulation loading of 85.7 wt% by controlling exclusively hydrolysis and condensed polymerization at oil/water interface in the initial interfacial polymerization step. In the subsequent in-situ polymerization step, the initial SiO2-based microcapsules as seeds could efficiently harvest SiO2 precursors and primary SiO2 particles to finely tune the SiO2 wall thickness, thereby enhancing long-term structural stability of the final SiO2-based microcapsules including high thermal stability with almost no any weight loss until 250°C, and strong tolerance against nonpolar solvents such as CCl4 with almost unchanged core-shell structure and unchanged core weight after immersing into strong solvents for up to 5 days. These SiO2-based microcapsules are extremely suited for processing them into anticorrosive coating in the presence of nonpolar solvents for self-healing application.

  16. Protective effects of D-Trp6-luteinising hormone-releasing hormone microcapsules against cyclophosphamide-induced gonadotoxicity in female rats.

    Science.gov (United States)

    Bokser, L; Szende, B; Schally, A V

    1990-06-01

    The possible protective effect of an agonist of luteinising hormone-releasing hormone (LH-RH) against the ovarian damage caused by cyclophosphamide was investigated in rats. D-Trp6-LH-RH microcapsules were injected once a month for 3 months, in a dose calculated to release 25 micrograms day-1. Control animals received the injection vehicle. Sixty days after the first injection of microcapsules, cyclophosphamide was given at a loading dose of 50 mg kg-1 followed by 5 mg kg-1 day-1 for 30 days, while the treatment with D-Trp6-LH-RH was continued. When the ovaries were examined 3 months and 5 months after discontinuation of treatment, a significant reduction in the total number of follicles (P less than 0.01) was found in non-pretreated animals given cyclophosphamide. This reduction affected mainly follicles larger than 100 microns. An irreversible disintegration and destruction of granulosa cells was also observed in this group. In animals pretreated with D-Trp6-LH-RH, administration of cyclophosphamide caused no reduction in the number and diameter of follicles. Thus, the treatment with D-Trp6-LH-RH microcapsules before and during chemotherapy prevented the ovarian injury inflicted by cyclophosphamide. The suppression of gonadal function by LH-RH analogues could be possibly utilised for the protection of the ovaries against damage caused by cytotoxic drugs.

  17. Enhanced oxidative stability of fish oil by encapsulating in culled banana resistant starch-soy protein isolate based microcapsules in functional bakery products.

    Science.gov (United States)

    Nasrin, Taslima Ayesha Aktar; Anal, Anil Kumar

    2015-08-01

    Oil in water emulsions were produced by the mixture of culled banana resistant starch (CBRS) & soy protein isolate (SPI), mixture of Hylon VII & SPI and SPI with 7.5 and 5 % (w/w) Menhaden fish oil. The emulsions were further freeze- dried obtaining 33 and 50 % oil load microcapsules. The range of particles diameter was 4.11 to 7.25 μm and viscosity was 34.6 to 146.48 cP of the emulsions. Compressibility index (CI), Hasner ratio (HR) and angle of repose (AR) was significantly (p < 0.01) lower of the microcapsules made with starch and protein (CBRS & SPI and Hylon VII & SPI) than that made with protein (SPI) only. Microcapsules composed of CBRS & SPI with 33 % oil load had maximum microencapsulation efficiency (82.49 %) and highest oxidative stability. Muffin made with emulsions containing mixture of CBRS & SPI exhibited less fishy flavour than that containing mixture of Hylon VII & SPI.

  18. Analgesic therapy in postherpetic neuralgia: a quantitative systematic review.

    Directory of Open Access Journals (Sweden)

    Kathleen Hempenstall

    2005-07-01

    Full Text Available BACKGROUND: Postherpetic neuralgia (PHN is a complication of acute herpes zoster, which is emerging as a preferred clinical trial model for chronic neuropathic pain. Although there are published meta-analyses of analgesic therapy in PHN, and neuropathic pain in general, the evidence base has been substantially enhanced by the recent publication of several major trials. Therefore, we have conducted a systematic review and meta-analysis for both efficacy and adverse events of analgesic therapy for PHN. METHODS AND FINDINGS: We systematically searched databases (MEDLINE 1966-2004, EMBASE 1988-2004, CINAHL 1982-2002, and PubMed [29 October 2004] for trials of PHN. We also searched references of retrieved studies and review articles for further trials. We included trials that examined adult patients with PHN of greater duration than 3 mo, that were blinded, randomised, and had at least one measure of pain outcome. Dichotomous pain outcome data were extracted for 50% decrease in baseline pain using a hierarchy of pain/pain-relief measurement tools. Where available, dichotomous data were also collected for adverse events. Calculated estimates of efficacy included relative benefit and number needed to treat. Of 62 studies identified, 35 were randomised controlled trials. Of these, 31 were placebo controlled and suitable for meta-analysis, from which it was possible to extract dichotomous efficacy outcome data from 25. This meta-analysis revealed that there is evidence to support the use of the following orally administered therapies: tricyclic antidepressants, "strong" opioids, gabapentin, tramadol, and pregabalin. Topical therapies associated with efficacy were lidocaine 5% patch and capsaicin. Finally, a single study of spinal intrathecal administration of lidocaine and methyl prednisolone demonstrated efficacy, although this has yet to be replicated. Data suggest that the following therapies are not associated with efficacy in PHN: certain NMDA

  19. Effect of intravenous esmolol on analgesic requirements in laparoscopic cholecystectomy

    Directory of Open Access Journals (Sweden)

    Ritima Dhir

    2015-01-01

    Full Text Available Background and Aims: Perioperative beta blockers are also being advocated for modulation of acute pain and reduction of intraoperative anesthetic requirements. This study evaluated the effect of perioperative use of esmolol, an ultra short acting beta blocker, on anesthesia and modulation of post operative pain in patients of laproscopic cholecystectomy. Material and Methods: Sixty adult ASA I & II grade patients of either sex, scheduled for laparoscopic cholecystectomy under general anesthesia, were enrolled in the study. The patients were randomly allocated to one of the two groups E or C according to computer generated numbers. Group E- Patients who received loading dose of injection esmolol 0.5 mg/kg in 30 ml isotonic saline, before induction of anesthesia, followed by an IV infusion of esmolol 0.05 μg/kg/min till the completion of surgery and Group C- Patients who received 30 ml of isotonic saline as loading dose and continuous infusion of isotonic saline at the same rate as the esmolol group till the completion of surgery. Results: The baseline MAP at 0 minute was almost similar in both the groups. At 8th minute (time of intubation, MAP increased significantly in group C as compared to group E and remained higher than group E till the end of procedure. Intraoperatively, 16.67% of patients in group C showed somatic signs as compared to none in group E. The difference was statistically significant. 73.33% of patients in group C required additional doses of Inj.Fentanyl as compared to 6.67% in group E. Conclusions: We conclude that intravenous esmolol influences the analgesic requirements both intraoperatively as well as postoperatively by modulation of the sympathetic component of the pain i.e. heart rate and blood pressure.

  20. Analgesic treatment of ciguatoxin-induced cold allodynia.

    Science.gov (United States)

    Zimmermann, Katharina; Deuis, Jennifer R; Inserra, Marco C; Collins, Lindon S; Namer, Barbara; Cabot, Peter J; Reeh, Peter W; Lewis, Richard J; Vetter, Irina

    2013-10-01

    Ciguatera, the most common form of nonbacterial ichthyosarcotoxism, is caused by consumption of fish that have bioaccumulated the polyether sodium channel activator ciguatoxin. The neurological symptoms of ciguatera include distressing, often persistent sensory disturbances such as paraesthesias and the pathognomonic symptom of cold allodynia. We show that intracutaneous administration of ciguatoxin in humans elicits a pronounced axon-reflex flare and replicates cold allodynia. To identify compounds able to inhibit ciguatoxin-induced Nav responses, we developed a novel in vitro ciguatoxin assay using the human neuroblastoma cell line SH-SY5Y. Pharmacological characterisation of this assay demonstrated a major contribution of Nav1.2 and Nav1.3, but not Nav1.7, to ciguatoxin-induced Ca2+ responses. Clinically available Nav inhibitors, as well as the Kv7 agonist flupirtine, inhibited tetrodotoxin-sensitive ciguatoxin-evoked responses. To establish their in vivo efficacy, we used a novel animal model of ciguatoxin-induced cold allodynia. However, differences in the efficacy of these compounds to reverse ciguatoxin-induced cold allodynia did not correlate with their potency to inhibit ciguatoxin-induced responses in SH-SY5Y cells or at heterologously expressed Nav1.3, Nav1.6, Nav1.7, or Nav1.8, indicating cold allodynia might be more complex than simple activation of Nav channels. These findings highlight the need for suitable animal models to guide the empiric choice of analgesics, and suggest that lamotrigine and flupirtine could be potentially useful for the treatment of ciguatera. Copyright © 2013 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

  1. Analgesic effect of bilateral subcostal tap block after laparoscopic cholecystectomy

    International Nuclear Information System (INIS)

    Karam, K.; Khan, B.I.

    2018-01-01

    Pain after laparoscopic cholecystectomy is mild to moderate in intensity. Several modalities are employed for achieving safe and effective postoperative analgesia, the benefits of which adds to the early recovery of the patients. As a part of multimodal analgesia, various approaches of Transversus abdominis plane (TAP) block has been used for management of parietal and incisional components of pain after laparoscopic cholecystectomy. This study was designed to compare the analgesic efficacy of two different approaches of ultrasound guided TAP block, i.e., Subcostal-TAP block technique with ultrasound guided Posterior-TAP block for post-operative pain management in patients undergoing laparoscopic cholecystectomy under general anaesthesia. Methods: In this double blinded randomized controlled study, consecutive nonprobability sampling was done and a total of 126 patients admitted for elective laparoscopic cholecystectomy fulfilling the inclusion criteria were selected. After induction of general anaesthesia, patients were randomized through draw method and received either ultrasound guided posterior TAP block with 0.375% bupivacaine (20ml volume) on each side of the abdomen or subcostal TAP block bilaterally with the same. Up to 24 hours postoperatively, static and dynamic numeric rating pain scores were assessed. Results: We found statistically significant difference in mean static pain scores over 24 hours postoperatively in subcostal TAP group, suggesting improved analgesia. However, mean dynamic postoperative pain scores were comparable between the two groups. Whereas, patients in both groups were satisfied with pain management. Conclusions: Ultrasound guided subcostal TAP block provides better postoperative analgesia as compared to the Posterior TAP block in laparoscopic cholecystectomy. Otherwise both of the approaches improve patient outcomes towards early recovery and discharge from hospital. (author)

  2. ANALGESIC ACTIVITY OF AQUEOUS EXTRACT OF CURCUMA AMADA (MANGO - GINGER IN MALE ALBINO WISTAR RATS

    Directory of Open Access Journals (Sweden)

    Kumari Bai

    2015-09-01

    Full Text Available BACKGROUND: Mango ginger ( Curcuma amada Roxb. has morphological resemblance with ginger, but imparts mango flavour. According to Ayurveda and Unani medicinal systems , the biological activities include antioxidant, antibacterial, antifungal, anti - inflammatory, antiallergic, CNS depressant and analgesic activity. Hence curcuma amada aqueous extract for analgesic activity was evaluated in pain animal models. Pain is a most common complaint of many medical conditions, and pain control is one of t he most important therapeutic priorities. Curcuma Amada suppresses the inflammatory mediators associated with pain. However there is no scientific data suggestive of its analgesic activity. Hence this study was carried out to evaluate its role in central a nd peripheral models of pain. OBJECTIVE: To Evaluate rhizomes of Curcuma Amada for analgesic activity in male albino wistar rats . MATERIALS AND METHODS: Albino rats, the proven models for analgesic studies. They were obtained from the animal house of DR.B. R. Ambedkar Medical College. Animals were maintained as per CPCSEA guidelines . The aqueous extract of curcuma amada was used.4x2 groups of 6 Rats were used to ensure that results obtained were statistically significant using ANOVA test. Analgesic activity was assessed with the help of following screening methods . Acetic Acid Writhing Method using Acetic Acid . Tail Flick Method using the Analgesiometer . Tail Immersion Method using Hot Water (55 0 C . Hot Plate method using Hot Plate . RESULT S: Aqueous extract of curcuma amada significantly suppressed the 1% acetic acid induced writhing response in rats when compared to control group (Gum acacia. In Tail flick test and Hot plate test Curcuma Amada increases the latency period of pain (reaction time. In Tail im mersion test the test drug significantly (P < 0.001 reduces pain at 30 min when compared to control group at 60 min of oral administration. CONCLUSION : The present findings indicate that

  3. Assessment of ropivacaine postoperative analgesic effect after periapical maxillary incisors surgery

    Directory of Open Access Journals (Sweden)

    Tijanić Miloš

    2012-01-01

    Full Text Available Background/Aim. Ropivacaine is a relatively new longacting local anesthetic. The aim of this study was to compare the postoperative analgesic effect of topical anesthetics ropivacaine 0.75% and lidocaine 2% with adrenaline in the postoperative treatment of periapical lesions in the maxilla. Methods. The study was conducted on 60 subjects, divided into two groups. The study-group received 0.75% ropivacaine without a vasoconstrictor, while the control group was treated with 2% lidocaine with adrenaline (1 : 80.000. Block anesthesia for n. infraorbitalis was used and local anesthetics were applied also on the palatine side for the end branches of n. nasopalatinus. The following parameters were observed: time elapsed from the application of an anesthetic until the first occurrence of pain after the surgery and first intake of an analgesic, the intensity of initial pain, pain intensity 6 h after the application of anesthetics and the total number of analgesics taken within 24 h after the completion of surgery. Results. The pain appeared statistically significantly earlier in the patients who had been given lidocaine with adrenaline (p < 0.001, while statistically significantly higher mean values of initial postoperative pain (p < 0.05 and pain intensity 6 h after the intervention (p < 0.01 were also registered in the same group of patients. In the period of 24 h upon the intervention, the study-group patients were taking less analgesics as compared to the control-group subjects (46.6% vs 73.3%, who were given analgesics earlier, although no statistically significant differences were observed related to the number of analgesic doses taken. Conclusion. The results of our study indicate a better postoperative analgesic effect of ropivacaine as compared to lidocaine with adrenaline.

  4. Differential Effectiveness of Clinically-Relevant Analgesics in a Rat Model of Chemotherapy-Induced Mucositis.

    Directory of Open Access Journals (Sweden)

    Alexandra L Whittaker

    Full Text Available Chemotherapy-induced intestinal mucositis is characterized by pain and a pro-inflammatory tissue response. Rat models are frequently used in mucositis disease investigations yet little is known about the presence of pain in these animals, the ability of analgesics to ameliorate the condition, or the effect that analgesic administration may have on study outcomes. This study investigated different classes of analgesics with the aim of determining their analgesic effects and impact on research outcomes of interest in a rat model of mucositis. Female DA rats were allocated to 8 groups to include saline and chemotherapy controls (n = 8. Analgesics included opioid derivatives (buprenorphine; 0.05mg/kg and tramadol 12.5mg/kg and NSAID (carprofen; 15mg/kg in combination with either saline or 5-Fluorouracil (5-FU; 150mg/kg. Research outcome measures included daily clinical parameters, pain score and gut histology. Myeloperoxidase assay was performed to determine gut inflammation. At the dosages employed, all agents had an analgesic effect based on behavioural pain scores. Jejunal myeloperoxidase activity was significantly reduced by buprenorphine and tramadol in comparison to 5-FU control animals (53%, p = 0.0004 and 58%, p = 0.0001. Carprofen had no ameliorating effect on myeloperoxidase levels. None of the agents reduced the histological damage caused by 5-FU administration although tramadol tended to increase villus length even when administered to healthy animals. These data provide evidence that carprofen offers potential as an analgesic in this animal model due to its pain-relieving efficacy and minimal effect on measured parameters. This study also supports further investigation into the mechanism and utility of opioid agents in the treatment of chemotherapy-induced mucositis.

  5. Analgesic use and the risk of kidney cancer: a meta-analysis of epidemiologic studies

    Science.gov (United States)

    Choueiri, Toni K.; Je, Youjin; Cho, Eunyoung

    2013-01-01

    Analgesics are the most commonly used over-the-counter drugs worldwide with certain analgesics having cancer prevention effect. The evidence for an increased risk of developing kidney cancer with analgesic use is mixed. Using a meta-analysis design of available observational epidemiologic studies, we investigated the association between analgesic use and kidney cancer risk. We searched the MEDLINE and EMBASE databases to identify eligible case-control or cohort studies published in English until June 2012 for 3 categories of analgesics: acetaminophen, aspirin or other Non-Steroidal Anti-Inflammatory Drugs (NSAIDs). Study-specific effect estimates were pooled to compute an overall relative risk (RR) and its 95% confidence interval (CI) using a random effects model for each category of the analgesics. We identified 20 studies (14 with acetaminophen, 13 with aspirin, and 5 with other NSAIDs) that were performed in 6 countries, including 8,420 cases of kidney cancer. Use of acetaminophen and non-aspirin NSAIDs were associated with an increased risk of kidney cancer (pooled RR, 1.28; 95% CI, 1.15 to 1.44 and 1.25; 95% CI, 1.06 to 1.46, respectively). For aspirin use, we found no overall increased risk (pooled RR, 1.10; 95% CI, 0.95 to 1.28), except for non-US studies (5 studies, pooled RR=1.17, 95% CI, 1.04 to 1.33). Similar increases in risks were seen with higher analgesic intake. In this largest meta-analysis to date, we found that acetaminophen and non-aspirin NSAIDs are associated with a significant risk of developing kidney cancer. Further work is needed to elucidate biologic mechanisms behind these findings. PMID:23400756

  6. An in vitro analysis of the cariogenic and erosive potential of pediatric liquid analgesics

    Directory of Open Access Journals (Sweden)

    Shaam Saeed

    2015-01-01

    Full Text Available Background: Analgesics such as Ibuprofen and Paracetamol, which are clinically used for the treatment of fever and/or pain, are among the most frequently used pediatric medicines. However, the properties of these preparations determine their cariogenic and erosive potential. Aims: The main objective of this study was to analyze the pH, viscosity and total sugar content in a variety of Syrian pediatric liquid analgesics (PLA. Setting and Design: A total of 16 available liquid analgesics that belong to the Paracetamol and Ibuprofen group were analysed. Materials and Methods: The endogenous pH was measured using a digital pH meter, the viscosity was measured using a digital rotational viscometer and the total sugar content was performed according to Fehling method. Statistical Analysis: Data were presented by means of descriptive statistics (mean, standard deviation, minimum and maximum values. Results: The mean endogenous pH of PLA was 4.63 ± 0.57 ranging between 3.93 and 5.68, and almost all of analgesics (93.8% had pH values ≤5.5. The mean viscosity of PLA was 243.56 ± 186.6 cP and varied between 20.5 cP and 640.5 cP. Sugars were detected in 11 (68.75% analgesics, and varied considerably among sugar-containing analgesics from 5.38 to 69.4 (g/100 mL with a mean concentration of 24.97 ± 23.24 g/100 mL. Conclusion: PLA are potentially cariogenic and erosive because of low pH, high viscosity and high total sugar content. This may increase our concerns about the dental health of children who take liquid analgesics frequently or when long-term treatment is indicated.

  7. Prescription of opioid and nonopioid analgesics for dental care in emergency departments: Findings from the National Hospital Ambulatory Medical Care Survey.

    Science.gov (United States)

    Okunseri, Christopher; Okunseri, Elaye; Xiang, Qun; Thorpe, Joshua M; Szabo, Aniko

    2014-01-01

    The aim of this study was to examine trends and associated factors in the prescription of opioid analgesics, nonopioid analgesics, opioid and nonopioid analgesic combinations, and no analgesics by emergency physicians for nontraumatic dental condition (NTDC)-related visits. Our secondary aim was to investigate whether race/ethnicity is a possible predictor of receiving a prescription for either type of medication for NTDC visits in emergency departments (EDs) after adjustment for potential covariates. We analyzed data from the National Hospital Ambulatory Medical Care Survey for 1997-2000 and 2003-2007, and used multinomial multivariate logistic regression to estimate the probability of receiving a prescription for opioid analgesics, nonopioid analgesics, or a combination of both, compared with receiving no analgesics for NTDC-related visits. During 1997-2000 and 2003-2007, prescription of opioid analgesics and combinations of opioid and nonopioid analgesics increased, and that of no analgesics decreased over time. The prescription rates for opioid analgesics, nonopioid analgesics, opioid and nonopioid analgesic combinations, and no analgesics for NTDC-related visits in EDs were 43 percent, 20 percent, 12 percent, and 25 percent, respectively. Majority of patients categorized as having severe pain received prescriptions for opioids for NTDC-related visits in EDs. After adjusting for covariates, patients with self-reported dental reasons for visit and severe pain had a significantly higher probability of receiving prescriptions for opioid analgesics and opioid and nonopioid analgesic combinations. Prescription of opioid analgesics increased over time. ED physicians were more likely to prescribe opioid analgesics and opioid and nonopioid analgesic combinations for NTDC-related visits with reported severe pain. © 2014 American Association of Public Health Dentistry.

  8. How resistant to tampering are codeine containing analgesics on the market? Assessing the potential for opioid extraction

    OpenAIRE

    Kimergård, Andreas; Deluca, Paolo; Hindersson, Peter; Breindahl, Torben

    2016-01-01

    IntroductionMisuse of opioid analgesics, in combination with diversion, dependence, and fatal overdoses, presents a serious problem for public health, which affects many countries worldwide. Within this context, tampering with opioids has been associated with serious harm. The aim of the present study was to assess the tampering potential of codeine combination analgesics on the market (containing codeine/non-opioid analgesics) by the extraction of codeine.MethodsCodeine was extracted from th...

  9. The impact of socioeconomic and clinical factors on purchase of prescribed analgesics before and after hysterectomy on benign indication

    DEFF Research Database (Denmark)

    Daugbjerg, Signe Bennedbæk; Brandsborg, Birgitte; Ottesen, Bent Smedegaard

    2014-01-01

    OBJECTIVE:: Pelvic pain is a primary symptom of women referred for hysterectomy. This study identified risk factors for purchase of prescribed analgesics before and after hysterectomy and examined purchase changes after hysterectomy, specifically focusing on socioeconomic effects. METHODS:: Nearly...... socioeconomic factors and changes in analgesic purchase were assessed. RESULTS:: Analgesic purchase after hysterectomy was independently predicted by age below 35 or above 65 years, body mass index >29.9, high American Society of Anesthesiologists (ASA) score, uterus weight...

  10. Analgesic efficacy of tramadol in cats with naturally occurring osteoarthritis.

    Directory of Open Access Journals (Sweden)

    Beatriz P Monteiro

    Full Text Available This study aimed to (1 compare outcome assessments in normal and osteoarthritic cats and (2 evaluate the analgesic efficacy of tramadol in feline osteoarthritis (OA, in a prospective, randomised, blinded, placebo-controlled, crossover design.Twenty cats were included after clinical examination, blood work and full body radiographs were performed. In Phase 1, outcome assessments aimed to differentiate normal (n = 5; i.e. exempt of any radiographic and clinical sign of OA from OA (n = 15 cats. In Phase 2, OA cats were treated twice daily with a placebo (PG: cornstarch 15 mg or tramadol (TG: 3 mg/kg orally for 19 days, with a 3-month washout period between treatments. Evaluations were performed in normal and OA cats at baseline and consisted of: 1 peak vertical force (PVF after staircase exercise; 2 telemetered night-time motor activity (NMA; and 3 response to mechanical temporal summation (RMTS. After treatment, PVF, NMA and RMTS evaluations were repeated in OA cats. Data were analysed with mixed model methods with an alpha-threshold of 5%.Phase 1: 1 PVF (% of body weight; mean ± SD was higher in normal (59 ± 10.5 than in OA cats (50.6 ± 5.7 (p = 0.005; 2 NMA (no unit was not different between groups; 3 RMTS (number of stimuli; median (range was higher in normal [29.5 (23.5-30] than in OA cats [14 (8.5-28] (p < 0.0001. Phase 2: PVF, NMA and RMTS presented a treatment effect (p = 0.024, p = 0.008 and p = 0.018, respectively. No clinically important adverse-effects were observed.Outcome assessments such as kinetics (PVF and evaluation of central sensitisation (RMTS are discriminant of OA status. Mobility measured by NMA was not discriminant of OA status, however it increased in OA cats with tramadol treatment. Nociceptive hypersensitivity quantified by RMTS was evident in OA cats and was responsive to tramadol treatment.

  11. Protection of Grain Products from Sitophilus oryzae (L.) Contamination by Anti-Insect Pest Repellent Sachet Containing Allyl Mercaptan Microcapsule.

    Science.gov (United States)

    Chang, Yoonjee; Lee, Soo-Hyun; Na, Ja Hyun; Chang, Pahn-Shick; Han, Jaejoon

    2017-11-01

    The purpose of this study was to develop an anti-insect pest repellent sachet to prevent Sitophilus oryzae (L.) (Coleoptera: Curculionidae) contamination in grain packaging. The anti-insect pest activities of essential oils (EOs) from garlic (Allium Sativum), ginger (Zingiber Officinalis), black pepper (Piper nigrum), onion (Allium cepa), and fennel (Foeniculum vulgare) as well as major compounds (allyl disulfide, AD; allyl mercaptan, AM) isolated from of garlic and onion (AD and AM) were measured against S. oryzae. The results revealed that garlic EO, onion EO, AD, and AM showed strong fumigant insecticidal activities. Among these, AM showed the highest acetylcholinesterase (AChE) inhibition rate, indicating that the fumigation insecticidal efficacy of AM is related with its AChE inhibition ability. Subsequently, the microcapsules were produced with a high efficiency (80.02%) by using AM as a core material and rice flour as a wall material. Finally, sachet composed of rice flour microcapsule containing 2% AM (RAM) was produced. Repellent assay was performed to measure anti-insect pest ability of the RAM sachet, showed remarkable repelling effect within 48 h both in the presence or absence of attractant. In a release profile of RAM sachet, it was expected to last over 20 mo during the distribution period of brown rice. Moreover, RAM sachet showed no undesirable changes to the sensory properties of the rice both before and after cooking. Taken together, these results suggest that the newly developed RAM sachet could be used as a packaging material to protect grain products from S. oryzae contamination. The rice weevil, Sitophilus oryzae (L.) (Coleoptera: Curculionidae), causes damages to stored products and its contamination in grain products has become a major problem in cereal market. To preserve brown rice, an anti-insect pest repellent sachet containing 2% allyl mercaptan was newly developed and it showed remarkable repellent abilities against S. oryzae. It

  12. A comparison of analgesic effect of intra-articular levobupivacaine with bupivacaine following knee arthroscopy

    International Nuclear Information System (INIS)

    Karaman, Yucel; Bor, Canan; Kayali, Cemil; Ozturk, Hasan; Kaya, Ahmet

    2009-01-01

    To compare the postoperative analgesic effects of intra-articular levobupivacaine with bupivacaine following knee arthroscopy. Forty patients, aged between 20-60 years and undergoing elective knee arthroscopy were enrolled into the study protocol that was carried out in Tepecik Education and Research Hospital, Izmir, Turkey between January and June 2007. General anesthesia protocol was the same in all patients. At the end of surgery, the patients were randomly assigned into 2 groups (n=20 in each group). Group L received 20 ml 0.5% levobupivacaine and Group B received 20 ml 0.5% bupivacaine intra-articularly. We evaluated the level of postoperative pain (by visual analoque scale at 1, 2, 4, 6, 12, and 24 hours after surgery), first analgesic requirement time (period measured from the end of the surgery until further analgesia was demanded), and total analgesic consumption during 24 hours. There were no significant difference in the postoperative pain scores of the patients between groups. The first analgesic requirement times were not statistically different. Twelve patients in Group L (60%) and 9 patients in Group B (45%) needed no additional analgesic during the 24 hours (p>0.05). No complications and side effects were found related to the intra-articular treatment. The results of the study show that intra-articular 20 ml 0.5% levobupivacaine provides effective analgesia comparable to that provided by 20 ml 0.5% bupivacaine. (author)

  13. Analgesic Usage in Elderly at Public Health Center: A study in West Java, Indonesias

    Directory of Open Access Journals (Sweden)

    Gembong Soeyono Putro

    2017-03-01

    Full Text Available Background: Various analgesics prescriptions for elderly are not appropriate according to the guideline and can cause the increase of side effects such as gastric problems. Puskesmas as a public health center in Indonesia has an important role in anticipating this problem. The objectives of this study was to identify the analgesic usage in elderly patients at the public health center. Methods: This retrospective descriptive study was conducted for 3 months at Tanjungsari public health center, Sumedang, West Java, Indonesia, using total sampling. The data was taken from 417 medical records from 2013. The data taken from medical records were: sex, analgesic drug, diagnosis, and drug for gastric problem. Results: From the collected data, the most analgesics prescribed for the elderly patients was paracetamol, followed by Piroxicam, Mefenamic acid, and Ibuprofen. Not all of the elderly patients who received NSAIDs, were given gastric drug. Conclusions: The most prescribed analgesic drug given to elderly patients at the public health center is paracetamol. [AMJ.2017;4(1:16–9

  14. Analgesic activity of piracetam: effect on cytokine production and oxidative stress.

    Science.gov (United States)

    Navarro, Suelen A; Serafim, Karla G G; Mizokami, Sandra S; Hohmann, Miriam S N; Casagrande, Rubia; Verri, Waldiceu A

    2013-04-01

    Piracetam is a prototype of nootropic drugs used to improve cognitive impairment. However, recent studies suggest that piracetam can have analgesic and anti-inflammatory effects. Inflammatory pain is the result of a process that depends on neutrophil migration, cytokines and prostanoids release and oxidative stress. We analyze whether piracetam has anti-nociceptive effects and its mechanisms. Per oral pretreatment with piracetam reduced in a dose-dependent manner the overt pain-like behavior induced by acetic acid, phenyl-p-benzoquinone, formalin and complete Freund's adjuvant. Piracetam also diminished carrageenin-induced mechanical and thermal hyperalgesia, myeloperoxidase activity, and TNF-α-induced mechanical hyperalgesia. Piracetam presented analgesic effects as post-treatment and local paw treatment. The analgesic mechanisms of piracetam were related to inhibition of carrageenin- and TNF-α-induced production of IL-1β as well as prevention of carrageenin-induced decrease of reduced glutathione, ferric reducing ability and free radical scavenging ability in the paw. These results demonstrate that piracetam presents analgesic activity upon a variety of inflammatory stimuli by a mechanism dependent on inhibition of cytokine production and oxidative stress. Considering its safety and clinical use for cognitive function, it is possible that piracetam represents a novel perspective of analgesic. Copyright © 2013 Elsevier Inc. All rights reserved.

  15. Nonprescription analgesics and their use in solid-organ transplantation: a review.

    Science.gov (United States)

    Gabardi, Steven; Luu, Linh

    2004-09-01

    To review the pharmacology, adverse events, drug interactions, and use of the nonprescription analgesics in solid-organ transplant recipients. Studies evaluating nonprescription analgesics in solid-organ transplantation were considered for evaluation. English-language studies were selected for inclusion. Nonprescription analgesics (aspirin, choline salicylate, magnesium salicylate, sodium salicylate, ibuprofen, ketoprofen, naproxen sodium, and acetaminophen) are the most commonly purchased over-the-counter agents in the United States. These agents, although generally considered safe, have been associated with a number of toxicities. The salicylates and nonsteroidal anti-inflammatory drugs have been associated with gastrointestinal damage, hematologic changes, liver and kidney dysfunction, and breathing difficulties. Acetaminophen has been shown to induce hematologic changes and liver and renal dysfunction. A closer look at the nonprescription analgesics reveals their potential for harm when used by solid-organ transplant recipients. In this patient population, the salicylates and nonsteroidal anti-inflammatory drugs should generally be avoided if possible, because of their potential toxicities, especially renal dysfunction. Low-dose aspirin, for the prevention of cardiovascular and cardiocerebral events, appears to be safe, but patients must still be followed closely. Acetaminophen is generally considered the nonprescription analgesic and antipyretic of choice in transplant recipients because of its favorable toxicity profile. However, it is imperative that patients and transplant practitioners are aware that this agent is not without toxicities and proper monitoring is advised.

  16. A Bacterial Toxin with Analgesic Properties: Hyperpolarization of DRG Neurons by Mycolactone.

    Science.gov (United States)

    Song, Ok-Ryul; Kim, Han-Byul; Jouny, Samuel; Ricard, Isabelle; Vandeputte, Alexandre; Deboosere, Nathalie; Marion, Estelle; Queval, Christophe J; Lesport, Pierre; Bourinet, Emmanuel; Henrion, Daniel; Oh, Seog Bae; Lebon, Guillaume; Sandoz, Guillaume; Yeramian, Edouard; Marsollier, Laurent; Brodin, Priscille

    2017-07-18

    Mycolactone, a polyketide molecule produced by Mycobacterium ulcerans , is the etiological agent of Buruli ulcer. This lipid toxin is endowed with pleiotropic effects, presents cytotoxic effects at high doses, and notably plays a pivotal role in host response upon colonization by the bacillus. Most remarkably, mycolactone displays intriguing analgesic capabilities: the toxin suppresses or alleviates the pain of the skin lesions it inflicts. We demonstrated that the analgesic capability of mycolactone was not attributable to nerve damage, but instead resulted from the triggering of a cellular pathway targeting AT₂ receptors (angiotensin II type 2 receptors; AT₂R), and leading to potassium-dependent hyperpolarization. This demonstration paves the way to new nature-inspired analgesic protocols. In this direction, we assess here the hyperpolarizing properties of mycolactone on nociceptive neurons. We developed a dedicated medium-throughput assay based on membrane potential changes, and visualized by confocal microscopy of bis-oxonol-loaded Dorsal Root Ganglion (DRG) neurons. We demonstrate that mycolactone at non-cytotoxic doses triggers the hyperpolarization of DRG neurons through AT₂R, with this action being not affected by known ligands of AT₂R. This result points towards novel AT₂R-dependent signaling pathways in DRG neurons underlying the analgesic effect of mycolactone, with the perspective for the development of new types of nature-inspired analgesics.

  17. Evaluation of Analgesic Activity of Papaver libanoticum Extract in Mice: Involvement of Opioids Receptors

    Directory of Open Access Journals (Sweden)

    Mohamad Ali Hijazi

    2017-01-01

    Full Text Available Papaver libanoticum is an endemic plant to Lebanese region (family Papaveraceae that has not been investigated before. The present study aimed to explore the analgesic activity of dried ethanolic extract of Papaver libanoticum (PLE using tail flick, hot plate, and acetic acid induced writhing models in mice. The involvement of opioid receptors in the analgesic mechanism was investigated using naloxone antagonism. Results demonstrated that PLE exhibited a potent dose dependent analgesic activity in all tested models for analgesia. The analgesic effect involved activation of opioid receptors in the central nervous system, where both spinal and supraspinal components might be involved. The time course for analgesia revealed maximum activity after three hours in both tail flick and hot plate methods, which was prolonged to 24 hours. Metabolites of PLE could be responsible for activation of opioid receptors. The EC50 of PLE was 79 and 50 mg/kg in tail flick and hot plate tests, respectively. The total coverage of analgesia by PLE was double that of morphine in both tests. In conclusion, PLE proved to have opioid agonistic activity with a novel feature of slow and prolonged effect. The present study could add a potential tool in the armaments of opioid drugs as a natural potent analgesic and for treatment of opioid withdrawal syndrome.

  18. Comparable effects of exercise and analgesics for pain secondary to knee osteoarthritis

    DEFF Research Database (Denmark)

    Henriksen, Marius; Hansen, Julie B; Klokker, Louise

    2016-01-01

    administered analgesics for pain in patients with knee osteoarthritis. METHODS: The Cochrane Database of systematic reviews was searched for meta-analyses of randomized controlled studies comparing exercise or analgesics with a control group (placebo or usual care) and with pain as an outcome. Individual study......AIM: Evidence of comparative effectiveness of different treatment approaches is important for clinical decision-making, yet absent for most recommended treatments of knee osteoarthritis pain. The objective of this study was to estimate the comparative effectiveness of exercise versus orally...... estimates were identified and effect sizes were calculated from group differences. We combined study-level effects on pain with a random effects meta-analysis and compared effect sizes between exercise trials and trials with analgesic interventions. RESULTS: We included six Cochrane reviews (four...

  19. Translational pain research: evaluating analgesic effect in experimental visceral pain models

    DEFF Research Database (Denmark)

    Olesen, Anne Estrup; Andresen, Trine; Christrup, Lona Louring

    2009-01-01

    Deep visceral pain is frequent and presents major challenges in pain management, since its pathophysiology is still poorly understood. One way to optimize treatment of visceral pain is to improve knowledge of the mechanisms behind the pain and the mode of action of analgesic substances. This can ...... studies and clinical condition in patients suffering from visceral pain, and thus constitute the missing link in translational pain research.......Deep visceral pain is frequent and presents major challenges in pain management, since its pathophysiology is still poorly understood. One way to optimize treatment of visceral pain is to improve knowledge of the mechanisms behind the pain and the mode of action of analgesic substances. This can...... facilitate minimizing the gap between knowledge gained in animal and human clinical studies. Combining experimental pain studies and pharmacokinetic studies can improve understanding of the pharmacokinetic-pharmacodynamic relationship of analgesics and, thus, provide valuable insight into optimal clinical...

  20. Analgesic effects of lappaconitine in leukemia bone pain in a mouse model

    Directory of Open Access Journals (Sweden)

    Xiao-Cui Zhu

    2015-05-01

    Full Text Available Bone pain is a common and severe symptom in cancer patients. The present study employed a mouse model of leukemia bone pain by injection K562 cells into tibia of mouse to evaluate the analgesic effects of lappacontine. Our results showed that the lappaconitine treatment at day 15, 17 and 19 could effectively reduce the spontaneous pain scoring values, restore reduced degree in the inclined-plate test induced by injection of K562 cells, as well as restore paw mechanical withdrawal threshold and paw withdrawal thermal latency induced by injection of K562 cells to the normal levels. Additionally, the molecular mechanisms of lappaconitine’s analgesic effects may be related to affect the expression levels of endogenous opioid system genes (POMC, PENK and MOR, as well as apoptosis-related genes (Xiap, Smac, Bim, NF-κB and p53. Our present results indicated that lappaconitine may become a new analgesic agent for leukemia bone pain management.