WorldWideScience

Sample records for anrep effect requires

  1. Annual report 2003[International Atomic Energy Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 9, generally follows the programme structure as it applied in 2003. The introductory chapter, seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Additional information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Co-operation Report. This material is also available on the Agency's WorldAtom web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2003/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Material Technologies; Analysis for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environments; Physical and Chemical Applications. Topics related to safety discussed in this report are: Safety of Nuclear Installations; Radiation Safety; Management of Radioactive Waste; Security of Material. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate chapter is devoted to Management of Technical Cooperation for Development.

  2. Annual report 2003

    International Nuclear Information System (INIS)

    2004-01-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 9, generally follows the programme structure as it applied in 2003. The introductory chapter, seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Additional information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Co-operation Report. This material is also available on the Agency's WorldAtom web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2003/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Material Technologies; Analysis for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environments; Physical and Chemical Applications. Topics related to safety discussed in this report are: Safety of Nuclear Installations; Radiation Safety; Management of Radioactive Waste; Security of Material. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate chapter is devoted to Management of Technical Cooperation for Development

  3. Annual report 2003

    International Nuclear Information System (INIS)

    2004-01-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 9, generally follows the programme structure as it applied in 2003. The introductory chapter, seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Additional information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Co-operation Report. This material is also available on the Agency's WorldAtom web site http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2003/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Material Technologies; Analysis for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environments; Physical and Chemical Applications. Topics related to safety discussed in this report are: Safety of Nuclear Installations; Radiation Safety; Management of Radioactive Waste; Security of Material. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate chapter is devoted to Management of Technical Cooperation for Development

  4. Annual report for 2004

    International Nuclear Information System (INIS)

    2005-01-01

    Article VI.J of the IAEA's Statute requires the Board of Governors to submit 'an annual report to the General Conference concerning the affairs of the Agency and any projects approved by the Agency'. This report covers the period 1 January to 31 December 2004. The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as it applied in 2004. The introductory chapter, 'The Agency and the World in 2004', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency's iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2004/). The Board of Governors oversees the ongoing operations of the Agency. It comprises 35 Member States and generally meets five times a year or more frequently if required for specific situations. Among its functions, the Board adopts the Agency's programme for the incoming biennium and makes recommendations on the Agency's budget to the General Conference. In 2004, the Board considered the Nuclear Technology Review 2004 and various activities related to nuclear science, technology and applications. This included authorizing the implementation of the Programme of Action for Cancer Therapy (PACT). In the area of safety and security, it considered the Nuclear Safety Review for the Year 2003 and related activities. It approved four Action Plans on various safety related activities and

  5. Annual report for 2004

    International Nuclear Information System (INIS)

    2005-01-01

    Article VI.J of the IAEA's Statute requires the Board of Governors to submit 'an annual report to the General Conference concerning the aff airs of the Agency and any projects approved by the Agency'. This report covers the period 1 January to 31 December 2004. The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as it applied in 2004. The introductory chapter, 'The Agency and the World in 2004', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency's iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2004/). The Board of Governors oversees the ongoing operations of the Agency. It comprises 35 Member States and generally meets five times a year or more frequently if required for specific situations. Among its functions, the Board adopts the Agency's programme for the incoming biennium and makes recommendations on the Agency's budget to the General Conference. In 2004, the Board considered the Nuclear Technology Review 2004 and various activities related to nuclear science, technology and applications. This included authorizing the implementation of the Programme of Action for Cancer Therapy (PACT). In the area of safety and security, it considered the Nuclear Safety Review for the Year 2003 and related activities. It approved four Action Plans on various safety related activities

  6. 44 CFR 19.125 - Effect of other requirements.

    Science.gov (United States)

    2010-10-01

    ... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 19.125 Effect of other requirements. (a... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Effect of other requirements. 19.125 Section 19.125 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY...

  7. Effective healthcare teams require effective team members: defining teamwork competencies

    Directory of Open Access Journals (Sweden)

    Leggat Sandra G

    2007-02-01

    Full Text Available Abstract Background Although effective teamwork has been consistently identified as a requirement for enhanced clinical outcomes in the provision of healthcare, there is limited knowledge of what makes health professionals effective team members, and even less information on how to develop skills for teamwork. This study identified critical teamwork competencies for health service managers. Methods Members of a state branch of the professional association of Australian health service managers participated in a teamwork survey. Results The 37% response rate enabled identification of a management teamwork competency set comprising leadership, knowledge of organizational goals and strategies and organizational commitment, respect for others, commitment to working collaboratively and to achieving a quality outcome. Conclusion Although not part of the research question the data suggested that the competencies for effective teamwork are perceived to be different for management and clinical teams, and there are differences in the perceptions of effective teamwork competencies between male and female health service managers. This study adds to the growing evidence that the focus on individual skill development and individual accountability and achievement that results from existing models of health professional training, and which is continually reinforced by human resource management practices within healthcare systems, is not consistent with the competencies required for effective teamwork.

  8. Effects of Using Requirements Catalogs on Effectiveness and Productivity of Requirements Specification in a Software Project Management Course

    Science.gov (United States)

    Fernández-Alemán, José Luis; Carrillo-de-Gea, Juan Manuel; Meca, Joaquín Vidal; Ros, Joaquín Nicolás; Toval, Ambrosio; Idri, Ali

    2016-01-01

    This paper presents the results of two educational experiments carried out to determine whether the process of specifying requirements (catalog-based reuse as opposed to conventional specification) has an impact on effectiveness and productivity in co-located and distributed software development environments. The participants in the experiments…

  9. Requirements for effective use of CFD in aerospace design

    Science.gov (United States)

    Raj, Pradeep

    1995-01-01

    This paper presents a perspective on the requirements that Computational Fluid Dynamics (CFD) technology must meet for its effective use in aerospace design. General observations are made on current aerospace design practices and deficiencies are noted that must be rectified for the U.S. aerospace industry to maintain its leadership position in the global marketplace. In order to rectify deficiencies, industry is transitioning to an integrated product and process development (IPPD) environment and design processes are undergoing radical changes. The role of CFD in producing data that design teams need to support flight vehicle development is briefly discussed. An overview of the current state of the art in CFD is given to provide an assessment of strengths and weaknesses of the variety of methods currently available, or under development, to produce aerodynamic data. Effectiveness requirements are examined from a customer/supplier view point with design team as customer and CFD practitioner as supplier. Partnership between the design team and CFD team is identified as an essential requirement for effective use of CFD. Rapid turnaround, reliable accuracy, and affordability are offered as three key requirements that CFD community must address if CFD is to play its rightful role in supporting the IPPD design environment needed to produce high quality yet affordable designs.

  10. An effective technique for the software requirements analysis of NPP safety-critical systems, based on software inspection, requirements traceability, and formal specification

    International Nuclear Information System (INIS)

    Koo, Seo Ryong; Seong, Poong Hyun; Yoo, Junbeom; Cha, Sung Deok; Yoo, Yeong Jae

    2005-01-01

    A thorough requirements analysis is indispensable for developing and implementing safety-critical software systems such as nuclear power plant (NPP) software systems because a single error in the requirements can generate serious software faults. However, it is very difficult to completely analyze system requirements. In this paper, an effective technique for the software requirements analysis is suggested. For requirements verification and validation (V and V) tasks, our technique uses software inspection, requirement traceability, and formal specification with structural decomposition. Software inspection and requirements traceability analysis are widely considered the most effective software V and V methods. Although formal methods are also considered an effective V and V activity, they are difficult to use properly in the nuclear fields as well as in other fields because of their mathematical nature. In this work, we propose an integrated environment (IE) approach for requirements, which is an integrated approach that enables easy inspection by combining requirement traceability and effective use of a formal method. The paper also introduces computer-aided tools for supporting IE approach for requirements. Called the nuclear software inspection support and requirements traceability (NuSISRT), the tool incorporates software inspection, requirement traceability, and formal specification capabilities. We designed the NuSISRT to partially automate software inspection and analysis of requirement traceability. In addition, for the formal specification and analysis, we used the formal requirements specification and analysis tool for nuclear engineering (NuSRS)

  11. 41 CFR 101-4.125 - Effect of other requirements.

    Science.gov (United States)

    2010-07-01

    ... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 101-4.125 Effect of... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Effect of other requirements. 101-4.125 Section 101-4.125 Public Contracts and Property Management Federal Property Management...

  12. Inflation Targeting and Quantitative Tightening: Effects of Reserve Requirements in Peru

    OpenAIRE

    Adrián Armas; Paul Castillo; Marco Vega

    2014-01-01

    This paper provides an overview of the reserve requirement measures undertaken by the Central Bank of Peru. It provides a rationale for the use of these instruments as well as empirical evidence of their effectiveness. In general, the results show that tightening reserve requirements has the desired effects on interest rates and credit levels at both banks and smaller financial institutions (cajas municipales).

  13. Annual report 2005

    International Nuclear Information System (INIS)

    2006-01-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 13, generally follows the programme structure as it applied in 2005. The introductory chapter, 'The Year in Review', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency?s iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2005/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Materials Technologies; Capacity Building and Nuclear Knowledge Maintenance for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environment; Physical and Chemical Applications. Topics related to Safety and Security discussed in this report are: Safety of Nuclear Installations; Radiation and Transport Safety; Management of Radioactive Waste; Nuclear Security. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate

  14. International Atomic Energy Agency annual report 2007: 50 years of atoms for peace

    International Nuclear Information System (INIS)

    2008-01-01

    The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as given in The Agency's Programme and Budget 2006-2007 (GC(49)/2). The introductory chapter seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. More detailed information can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review, Technical Cooperation Report and the Safeguards Statement for 2007 and Background to the Safeguards Statement. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is provided on the attached CD-ROM, and is also available on the Agency's web site at http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2007/. Except where indicated, all sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to technology are: nuclear power; nuclear fuel cycle and materials technologies; capacity building and nuclear knowledge maintenance for sustainable energy development; nuclear science; food and agriculture; human health; water resources; assessment and management of marine and terrestrial environments; radioisotope production and radiation technology; safety and security; incident and emergency preparedness and response; safety of nuclear installations; radiation and transport safety; management of radioactive waste; nuclear security

  15. International Atomic Energy Agency annual report 2006

    International Nuclear Information System (INIS)

    2007-01-01

    The Annual Report reviews the results of the Agency's programme according to the three pillars of technology, safety and verification. The main part of the report generally follows the programme structure as given in The Agency's Programme and Budget 2006-2007 (GC(49)/2). The introductory chapter seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. More detailed information can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review, Technical Cooperation Report and the Safeguards Statement for 2006 and Background to the Safeguards Statement. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is provided on the attached CD-ROM, and is also available on the Agency's web site at http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2006/. Except where indicated, all sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to technology are: nuclear power; nuclear fuel cycle and materials technologies; capacity building and nuclear knowledge maintenance for sustainable energy development; nuclear science; food and agriculture; human health; water resources; assessment and management of marine and terrestrial environments; radioisotope production and radiation technology; safety and security; incident and emergency preparedness and response; safety of nuclear installations; radiation and transport safety; management of radioactive waste; nuclear security

  16. Annual report 2005[International Atomic Energy Agency]; Informe anual 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The Annual Report reviews the results of the Agency's programme according to the three 'pillars' of technology, safety and verification. The main part of the report, starting on page 13, generally follows the programme structure as it applied in 2005. The introductory chapter, 'The Year in Review', seeks to provide a thematic analysis, based on the three pillars, of the Agency's activities within the overall context of notable developments during the year. Information on specific issues can be found in the latest editions of the Agency's Nuclear Safety Review, Nuclear Technology Review and Technical Cooperation Report. For the convenience of readers, these documents are available on the CD-ROM attached to the inside back cover of this report. Additional information covering various aspects of the Agency's programme is also provided on the attached CD-ROM, and is also available on the Agency?s iaea.org web site (http://www.iaea.org/Worldatom/Documents/Anrep/Anrep2005/). All sums of money are expressed in United States dollars. The designations employed and the presentation of material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat concerning the legal status of any country or territory or of its authorities, or concerning the delimitation of its frontiers. The topics covered in the chapter related to Technology are: Nuclear Power; Nuclear Fuel Cycle and Materials Technologies; Capacity Building and Nuclear Knowledge Maintenance for Sustainable Energy Development; Nuclear Science; Food and Agriculture; Human Health; Water Resources; Protection of the Marine and Terrestrial Environment; Physical and Chemical Applications. Topics related to Safety and Security discussed in this report are: Safety of Nuclear Installations; Radiation and Transport Safety; Management of Radioactive Waste; Nuclear Security. Topics related to Verification are Safeguards and Verification in Iraq Pursuant to UNSC Resolutions. A separate

  17. Cost effectiveness of adopted quality requirements in hospital laboratories.

    Science.gov (United States)

    Hamza, Alneil; Ahmed-Abakur, Eltayib; Abugroun, Elsir; Bakhit, Siham; Holi, Mohamed

    2013-01-01

    The present study was designed in quasi-experiment to assess adoption of the essential clauses of particular clinical laboratory quality management requirements based on international organization for standardization (ISO 15189) in hospital laboratories and to evaluate the cost effectiveness of compliance to ISO 15189. The quality management intervention based on ISO 15189 was conceded through three phases; pre - intervention phase, Intervention phase and Post-intervention phase. In pre-intervention phase the compliance to ISO 15189 was 49% for study group vs. 47% for control group with P value 0.48, while the post intervention results displayed 54% vs. 79% for study group and control group respectively in compliance to ISO 15189 and statistically significant difference (P value 0.00) with effect size (Cohen's d) of (0.00) in pre-intervention phase and (0.99) in post - intervention phase. The annual average cost per-test for the study group and control group was 1.80 ± 0.25 vs. 1.97 ± 0.39, respectively with P value 0.39 whereas the post-intervention results showed that the annual average total costs per-test for study group and control group was 1.57 ± 0.23 vs 2.08 ± 0.38, P value 0.019 respectively, with cost-effectiveness ratio of (0.88) in pre -intervention phase and (0.52) in post-intervention phase. The planned adoption of quality management requirements (QMS) in clinical laboratories had great effect to increase the compliance percent with quality management system requirement, raise the average total cost effectiveness, and improve the analytical process capability of the testing procedure.

  18. 29 CFR 36.125 - Effect of other requirements.

    Science.gov (United States)

    2010-07-01

    ...; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or local law or other requirements. The...

  19. 10 CFR 1042.125 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ...; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or local law or other requirements. The...

  20. Sunk cost and work ethic effects reflect suboptimal choice between different work requirements.

    Science.gov (United States)

    Magalhães, Paula; White, K Geoffrey

    2013-03-01

    We investigated suboptimal choice between different work requirements in pigeons (Columba livia), namely the sunk cost effect, an irrational tendency to persist with an initial investment, despite the availability of a better option. Pigeons chose between two keys, one with a fixed work requirement to food of 20 pecks (left key), and the other with a work requirement to food which varied across conditions (center key). On some trials within each session, such choices were preceded by an investment of 35 pecks on the center key, whereas on others they were not. On choice trials preceded by the investment, the pigeons tended to stay and complete the schedule associated with the center key, even when the number of pecks to obtain reward was greater than for the concurrently available left key. This result indicates that pigeons, like humans, commit the sunk cost effect. With higher work requirements, this preference was extended to trials where there was no initial investment, so an overall preference for the key associated with more work was evident, consistent with the work ethic effect. We conclude that a more general work ethic effect is amplified by the effect of the prior investment, that is, the sunk cost effect. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. On the Compliance of Simbol-X Mirror Roughness with its Effective Area Requirements

    Science.gov (United States)

    Spiga, D.; Basso, S.; Cotroneo, V.; Pareschi, G.; Tagliaferri, G.

    2009-05-01

    Surface microroughness of X-ray mirrors is a key issue for the angular resolution of Simbol-X to comply with the required one (Simbol-X mirrors, in order to satisfy the required imaging capability, has already been derived in terms of its PSD (Power Spectral Density). However, also the Effective Area of the telescope is affected by the mirror roughness. In this work we will show how the expected effective area of the Simbol-X mirror module can be computed from the roughness PSD tolerance, checking its compliance with the requirements.

  2. Effective Teaching Methods in Higher Education: Requirements and Barriers.

    Science.gov (United States)

    Shirani Bidabadi, Nahid; Nasr Isfahani, Ahmmadreza; Rouhollahi, Amir; Khalili, Roya

    2016-10-01

    Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors). Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered) plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors' behavior and some of these are prerequisite in professors' outlook. Also, there are some major barriers, some of which are associated with the professors' operation and others are related to laws and regulations. Implications of these findings for teachers' preparation in education are discussed. In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities should be awarded of these barriers and requirements as a way to

  3. Effective teaching methods in higher education: requirements and barriers

    Directory of Open Access Journals (Sweden)

    NAHID SHIRANI BIDABADI

    2016-10-01

    Full Text Available Introduction: Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. Methods: This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors. Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. Results: According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors’ behavior and some of these are prerequisite in professors’ outlook. Also, there are some major barriers, some of which are associated with the professors’ operation and others are related to laws and regulations. Implications of these findings for teachers’ preparation in education are discussed. Conclusion: In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities

  4. On the Compliance of Simbol-X Mirror Roughness with its Effective Area Requirements

    International Nuclear Information System (INIS)

    Spiga, D.; Basso, S.; Cotroneo, V.; Pareschi, G.; Tagliaferri, G.

    2009-01-01

    Surface microroughness of X-ray mirrors is a key issue for the angular resolution of Simbol-X to comply with the required one (<20 arcsec at 30 keV). The maximum tolerable microroughness for Simbol-X mirrors, in order to satisfy the required imaging capability, has already been derived in terms of its PSD (Power Spectral Density). However, also the Effective Area of the telescope is affected by the mirror roughness. In this work we will show how the expected effective area of the Simbol-X mirror module can be computed from the roughness PSD tolerance, checking its compliance with the requirements.

  5. 21 CFR 864.3 - Effective dates of requirement for premarket approval.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Effective dates of requirement for premarket approval. 864.3 Section 864.3 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES General Provisions § 864.3 Effective...

  6. Users' Requirements for Environmental Effects From Innovative Nuclear Energy Systems and Their Fuel Cycles

    International Nuclear Information System (INIS)

    Carreter, M.; Gray, M.; Falck, E.; Bonne, A.; Bell, M.

    2002-01-01

    The objective of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) is to support the safe, sustainable, economic and proliferation resistant use of nuclear technology to meet the needs of the 21. century. The first part of the project focusses on the development of an understanding of the requirements of possible users of innovative concepts for reactors and fuel cycle applications. This paper reports progress made on the identification of user requirements as they relate to the environment and environmental protection. The user requirements being formulated are intended to limit adverse environmental effects from the different facilities involved in the nuclear fuel cycles to be well below maximum acceptable levels. To determine if the user requirements are met, it is necessary to identify those factors that are relevant to assessment of the environmental performance of innovative nuclear systems. To this effect, Environmental Impact Assessment (EIA) and the Material Flow accounting (MFA) methodologies are being appraised for the suitability for application. This paper develops and provides the rationale for the 'users' requirements' as they are currently defined. Existing Environmental Impact Assessment and Materials Flow Accounting methodologies that can be applied to determine whether or not innovative technologies conform to the User Requirements are briefly described. It is concluded that after establishing fundamental principles, it is possible to formulate sets of general and specific users' requirements against which, the potential adverse environmental effects to be expected from innovative nuclear energy systems (INES) can be assessed. The application of these users' requirements should keep the adverse environmental effects from INES's within acceptable limits. (authors)

  7. Evaluation of the effect of torsemide on warfarin dosage requirements.

    Science.gov (United States)

    Lai, Sophia; Momper, Jeremiah D; Yam, Felix K

    2017-08-01

    Background According to drug interaction databases, torsemide may potentiate the effects of warfarin. Evidence for this drug-drug interaction, however, is conflicting and the clinical significance is unknown. Objective The aim of this study is to evaluate the impact of torsemide initiation on warfarin dosage requirements. Setting This study was conducted at the Veterans Affairs Healthcare System in San Diego, California. Method A retrospective cohort study was conducted using Veterans Affairs data from patients who were converted from bumetanide to torsemide between March 2014 and July 2014. Patients were also prescribed and taking warfarin during the observation period. Warfarin dosage requirements were evaluated to determine if any changes occurred within the first 3 months of starting torsemide. Main outcome measure The primary outcome was the average weekly warfarin dose before and after torsemide initiation. Results Eighteen patients met study inclusion criteria. The weekly warfarin dose before and after initiation of torsemide was not significantly different (34 ± 15 and 34 ± 13 mg, p > 0.05). Of those eighteen patients, only two experienced elevations in INR that required a decrease in warfarin dosage after torsemide initiation. Between those two patients, dosage reductions ranged from 5.3 to 18%. Conclusion These results indicated that most patients did not require any warfarin dosage adjustments after torsemide was initiated. The potential for interaction, however, still exists. While empiric warfarin dosage adjustments are not recommended when initiating torsemide, increased monitoring is warranted to minimize the risk of adverse effects.

  8. Quantifying requirements volatility effects

    NARCIS (Netherlands)

    Kulk, G.P.; Verhoef, C.

    2008-01-01

    In an organization operating in the bancassurance sector we identified a low-risk IT subportfolio of 84 IT projects comprising together 16,500 function points, each project varying in size and duration, for which we were able to quantify its requirements volatility. This representative portfolio

  9. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  10. Nursing home staffing requirements and input substitution: effects on housekeeping, food service, and activities staff.

    Science.gov (United States)

    Bowblis, John R; Hyer, Kathryn

    2013-08-01

    To study the effect of minimum nurse staffing requirements on the subsequent employment of nursing home support staff. Nursing home data from the Online Survey Certification and Reporting (OSCAR) System merged with state nurse staffing requirements. Facility-level housekeeping, food service, and activities staff levels are regressed on nurse staffing requirements and other controls using fixed effect panel regression. OSCAR surveys from 1999 to 2004. Increases in state direct care and licensed nurse staffing requirements are associated with decreases in the staffing levels of all types of support staff. Increased nursing home nurse staffing requirements lead to input substitution in the form of reduced support staffing levels. © Health Research and Educational Trust.

  11. Test requirements for the integral effect test to simulate Korean PWR plants

    Energy Technology Data Exchange (ETDEWEB)

    Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K

    2001-02-01

    In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time.

  12. Test requirements for the integral effect test to simulate Korean PWR plants

    International Nuclear Information System (INIS)

    Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K.

    2001-02-01

    In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time

  13. The effect of requirements prioritization on avionics system conceptual design

    Science.gov (United States)

    Lorentz, John

    project schedule, resulting in greater success during system deployment and operational testing. This dissertation will discuss the data and findings from participant studies, present a literature review of systems engineering and design processes, and test the hypothesis that the prioritization process had no effect on stakeholder sentiment related to the conceptual design. In addition, the "Requirements Rationalization" process will be discussed in detail. Avionics, like many other systems, has transitioned from a discrete electronics engineering, hard engineering discipline to incorporate software engineering as a core process of the technology development cycle. As with other software-based systems, avionics now has significant soft system attributes that must be considered in the design process. The boundless opportunities that exist in software design demand prioritization to focus effort onto the critical functions that the software must provide. This has been a well documented and understood phenomenon in the software development community for many years. This dissertation will attempt to link the effect of software integrated avionics to the benefits of prioritization of requirements in the problem space and demonstrate the sociological and technical benefits of early prioritization practices.

  14. Ecological effectiveness as an essential quality requirement of innovational construction

    Directory of Open Access Journals (Sweden)

    Mkrtchyan Tamara

    2017-01-01

    Full Text Available Nowadays it seems to be very essential to develop national construction industry by implementation of innovative technologies. As an object of innovational construction «Smart house» or «green building» demonstrates the latest advances in ecological building materials, energy-saving structures and lean-technologies. According to the concept of TQM «green building» has tube compatible with environmental protection, environment sustainability and ecological effectiveness requirements. «Green certification» includes these terms into the National environment sustainability rating system. The main goal of this research work was to review and compare theoretical models and concepts of effectiveness and analyze their applicability to determine the term ecological effectiveness as the main Quality Score.

  15. Effects of spent nuclear fuel aging on disposal requirements

    International Nuclear Information System (INIS)

    McKee, R.W.; Johnson, K.I.; Huber, H.D.; Bierschbach, M.C.

    1991-10-01

    This paper describes results of a study to analyze the waste management systems effects of extended spent fuel aging on spent fuel disposal requirements. The analysis considers additional spent fuel aging up to a maximum of 50 years relative to the currently planned 2010 repository startup in the United States. As part of the analysis, an equal energy disposition (EED) methodology was developed for determining allowable waste emplacement densities and waste container loading in a geologic repository. Results of this analysis indicate that substantial benefits of spent fuel aging will already have been achieved by a repository startup in 2010 (spent fuel average age will be 28 years). Even so, further significant aging benefits, in terms of reduced emplacement areas and mining requirements and reduced number of waste containers, will continue to accrue for at least another 50 years when the average spent fuel age would be 78 years, if the repository startup is further delayed

  16. Status of Technical Requirements Development for Maintenance Effectiveness Management

    International Nuclear Information System (INIS)

    Ahn, Sang Kyu; Kim, Yun Il; Lee, Chang Ju; Chang, Gun Hyun

    2012-01-01

    It is well known that proper maintenance at nuclear power plant is essential to plant safety and that there is a clear link between effective maintenance and safety as it relates to such factors as the number of transients and challenges to safety systems and the associated need for operability, availability, and reliability of safety equipment. Good maintenance is also important in providing assurance that failures of non-safety related structures, systems, and components (SSCs) that could initiate, adversely affect, or mitigate a transient or an accident are also minimized. Maintenance is also important to ensure that design assumptions and margins in the original design basis are maintained and are not degraded to an unacceptable level. Therefore, good maintenance practice at nuclear power plants is of utmost importance in protecting public health and safety. This paper introduces the status of the development of regulatory technical requirements (Drafts) for utility's management of maintenance effectiveness. The process of Maintenance Effectiveness Management is shown in Figure 1

  17. Identifying Requirements for Effective Human-Automation Teamwork

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey C. Joe; John O' Hara; Heather D. Medema; Johanna H. Oxstrand

    2014-06-01

    Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

  18. Army Materiel Requirements Documents: Qualitative Analysis of Efficiency and Effectiveness

    Science.gov (United States)

    2013-06-01

    focuses on the program’s time to execute their mission based off the MRDs/MCDs. We measure efficiency based on two BPP initiatives: (1) Build...definitions of each BPP initiative during our interviews. A poor rating indicates the requirement documents did not sufficiently support the program...in terms of efficiency and effectiveness according to BPP initiatives. For efficiency, we assign a qualitative measure based on SME responses across

  19. An Analysis of the Army Service Acquisition Review Requirements and the Perceived Effectiveness on Intended Improvements

    Science.gov (United States)

    2016-06-01

    Selection Evaluation Market Research Metrics Competition Acquisition Schedule Consolidation Recommendation As detailed in the Chapter IIB, OSD Policy...REQUIREMENTS AND THE PERCEIVED EFFECTIVENESS ON INTENDED IMPROVEMENTS June 2016 By: Roxanne Moss Michael Vukovich Megan Weidner Advisors...ANALYSIS OF THE ARMY SERVICE ACQUISITION REVIEW REQUIREMENTS AND THE PERCEIVED EFFECTIVENESS ON INTENDED IMPROVEMENTS 5. FUNDING NUMBERS 6. AUTHOR(S

  20. Improving cost-effectiveness and mitigating risks of renewable energy requirements

    Science.gov (United States)

    Griffin, James P.

    Policy makers at the federal and state levels of government are debating actions to reduce U.S. greenhouse gas emissions and dependence on oil as an energy source. Several concerns drive this debate: sharp rises in energy prices, increasing unease about the risks of climate change, energy security, and interest in expanding the domestic renewable energy industry. Renewable energy requirements are frequently proposed to address these concerns, and are currently in place, in various forms, at the federal and state levels of government. These policies specify that a certain portion of the energy supply come from renewable energy sources. This dissertation focuses on a specific proposal, known as 25 X 25, which requires 25% of electricity and motor vehicle transportation fuels supplied to U.S. consumers to come from renewable energy sources, such as wind power and ethanol, by 2025. This dissertation builds on prior energy policy analysis, and more specifically analyses of renewable energy requirements, by assessing the social welfare implications of a 25 x 25 policy and applying new methods of uncertainty analysis to multiple policy options decision makers can use to implement the policy. These methods identify policy options that can improve the cost-effectiveness and reduce the risks of renewable energy requirements. While the dissertation focuses on a specific policy, the research methods and findings are applicable to other renewable energy requirement policies. In the dissertation, I analyze six strategies for implementing a 25 x 25 policy across several hundred scenarios that represent plausible futures for uncertainties in energy markets, such as renewable energy costs, energy demand, and fossil fuel prices. The strategies vary in the availability of resources that qualify towards the policy requirement and the use of a "safety valve" that allows refiners and utilities to pay a constant fee after renewable energy costs reach a predetermined threshold. I test

  1. Institutional effectiveness of REDD+ MRV: Countries progress in implementing technical guidelines and good governance requirements

    NARCIS (Netherlands)

    Ochieng, R.M.; Visseren-Hamakers, Ingrid; Arts, B.; Brockhaus, M.; Herold, M.

    2016-01-01

    The UNFCCC requires REDD+ countries wishing to receive results-based payments to measure, report and verify (MRV) REDD+ impacts; and outlines technical guidelines and good governance requirements for MRV. This article examines institutional effectiveness of REDD+ MRV by assessing countries’ progress

  2. Learned helplessness: effects of response requirement and interval between treatment and testing.

    Science.gov (United States)

    Hunziker, M H L; Dos Santos, C V

    2007-11-01

    Three experiments investigated learned helplessness in rats manipulating response requirements, shock duration, and intervals between treatment and testing. In Experiment 1, rats previously exposed to uncontrollable or no shocks were tested under one of four different contingencies of negative reinforcement: FR 1 or FR 2 escape contingency for running, and FR1 escape contingency for jumping (differing for the maximum shock duration of 10s or 30s). The results showed that the uncontrollable shocks produced a clear operant learning deficit (learned helplessness effect) only when the animals were tested under the jumping FR 1 escape contingency with 10-s max shock duration. Experiment 2 isolated of the effects of uncontrollability from shock exposure per se and showed that the escape deficit observed using the FR 1 escape jumping response (10-s shock duration) was produced by the uncontrollability of shock. Experiment 3 showed that using the FR 1 jumping escape contingency in the test, the learned helplessness effect was observed one, 14 or 28 days after treatment. These results suggest that running may not be an appropriate test for learned helplessness, and that many diverging results found in the literature might be accounted for by the confounding effects of respondent and operant contingencies present when running is required of rats.

  3. Requirements for effective academic leadership in Iran: A Nominal Group Technique exercise

    Science.gov (United States)

    Bikmoradi, Ali; Brommels, Mats; Shoghli, Alireza; Sohrabi, Zohreh; Masiello, Italo

    2008-01-01

    Background During the last two decades, medical education in Iran has shifted from elite to mass education, with a considerable increase in number of schools, faculties, and programs. Because of this transformation, it is a good case now to explore academic leadership in a non-western country. The objective of this study was to explore the views on effective academic leadership requirements held by key informants in Iran's medical education system. Methods A nominal group study was conducted by strategic sampling in which participants were requested to discuss and report on requirements for academic leadership, suggestions and barriers. Written notes from the discussions were transcribed and subjected to content analysis. Results Six themes of effective academic leadership emerged: 1)shared vision, goal, and strategy, 2) teaching and research leadership, 3) fair and efficient management, 4) mutual trust and respect, 5) development and recognition, and 6) transformational leadership. Current Iranian academic leadership suffers from lack of meritocracy, conservative leaders, politicization, bureaucracy, and belief in misconceptions. Conclusion The structure of the Iranian medical university system is not supportive of effective academic leadership. However, participants' views on effective academic leadership are in line with what is also found in the western literature, that is, if the managers could create the premises for a supportive and transformational leadership, they could generate mutual trust and respect in academia and increase scientific production. PMID:18430241

  4. Requirements for effective academic leadership in Iran: A Nominal Group Technique exercise

    Directory of Open Access Journals (Sweden)

    Shoghli Alireza

    2008-04-01

    Full Text Available Abstract Background During the last two decades, medical education in Iran has shifted from elite to mass education, with a considerable increase in number of schools, faculties, and programs. Because of this transformation, it is a good case now to explore academic leadership in a non-western country. The objective of this study was to explore the views on effective academic leadership requirements held by key informants in Iran's medical education system. Methods A nominal group study was conducted by strategic sampling in which participants were requested to discuss and report on requirements for academic leadership, suggestions and barriers. Written notes from the discussions were transcribed and subjected to content analysis. Results Six themes of effective academic leadership emerged: 1shared vision, goal, and strategy, 2 teaching and research leadership, 3 fair and efficient management, 4 mutual trust and respect, 5 development and recognition, and 6 transformational leadership. Current Iranian academic leadership suffers from lack of meritocracy, conservative leaders, politicization, bureaucracy, and belief in misconceptions. Conclusion The structure of the Iranian medical university system is not supportive of effective academic leadership. However, participants' views on effective academic leadership are in line with what is also found in the western literature, that is, if the managers could create the premises for a supportive and transformational leadership, they could generate mutual trust and respect in academia and increase scientific production.

  5. 78 FR 66841 - Turtles Intrastate and Interstate Requirements; Confirmation of Effective Date

    Science.gov (United States)

    2013-11-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 1240 [Docket No. FDA-2013-N-0639] Turtles Intrastate and Interstate Requirements; Confirmation of Effective Date AGENCY... turtle eggs and live turtles with a carapace length of less than 4 inches to remove procedures for...

  6. Food consumption patterns and their effect on water requirement in China

    Directory of Open Access Journals (Sweden)

    J. Liu

    2008-06-01

    Full Text Available It is widely recognized that food consumption patterns significantly impact water requirements. The aim of this paper is to quantify how food consumption patterns influence water requirements in China. The findings show that per capita water requirement for food (CWRF has increased from 255 m3 cap-1y−1 in 1961 to 860 m3 cap-1 y−1 in 2003, largely due to an increase in the consumption of animal products in recent decades. Although steadily increasing, the CWRF of China is still much lower than that of many developed countries. The total water requirement for food (TWRF has been determined as 1127 km3 y-1 in 2003. Three scenarios are proposed to project future TWRF, representing low, medium, and high levels of modernization (S1, S2, and S3, respectively. Analysis of these three scenarios indicates that TWRF will likely continue to increase in the next three decades. An additional amount of water ranging between 407 and 515 km3 y-1 will be required in 2030 compared to the TWRF in 2003. This will undoubtedly put high pressure on China's already scarce water resources. We conclude that the effect of the food consumption patterns on China's water resources is substantial both in the recent past and in the near future. China will need to strengthen "green water" management and to take advantage of "virtual water" import to meet the additional TWRF.

  7. Retrieval effects on ventilation and cooling requirements for a nuclear waste repository

    International Nuclear Information System (INIS)

    Hambley, D.F.

    1985-01-01

    The Nuclear Waste Policy Act of 1982 (Public Law 97-425) and the regulations promulgated in Title 10, Part 60 of the Code of Federal Regulations (10CFR60) by the US Nuclear Regulatory Commission (NRC) for an underground repository for spent fuel and high level nuclear waste (HLW) require that it is possible to retrieve waste, for whatever reason, from such a facility for a period of 50 years from initial storage or until the completion of the performance confirmation period, whichever comes first. This paper considers the effects that the retrievability option mandates on ventilation and cooling systems required for normal repository operations. An example is given for a hypothetical repository in salt. 18 refs., 1 tab

  8. Ecological effects assessment: requirements vs state-of-the-art

    International Nuclear Information System (INIS)

    McKenzie, D.H.; Thomas, J.M.; Eberhardt, L.L.

    1981-05-01

    Concerns for environmental quality, the ecologist's understanding of ecosystems, and the ability to quantitatively sample and evaluate hypotheses have contributed to current requirements and the state-of-the-art in ecological effects assessments in refard to nuclear power plants. The current cooling system approaches, data collection programs, and ecological effects assessments reflect these contributions. Over a decade of experience provides the basis for a timely review and evaluation of current proactice. The magnitude of economic and environmental resources being committed to cooling system alternatives mandates that the decision-making process result in as many optimal choices as possible. In addition, the resources being devoted to environmental data collection and integration provide considerable motivation for providing meaningful input to the decision-making process. It is maintained that the input should be as quantitative and as free from subjective content as is reasonably possible. An alternative viewpoint suggests that the past several decades of experience be considered but a first step, and the current task to be one of designing a second step

  9. What is the effect of different skin types on the required dose for photodynamic therapy?

    CSIR Research Space (South Africa)

    Karsten, AE

    2008-11-01

    Full Text Available For effective laser treatment it is very important to provide the correct dose at the required treatment depth. In South Africa we have a richness of ethnic groups contributing to a large variety in skin tones. Effective laser treatment of skin...

  10. Environmental Requirements Management

    Energy Technology Data Exchange (ETDEWEB)

    Cusack, Laura J.; Bramson, Jeffrey E.; Archuleta, Jose A.; Frey, Jeffrey A.

    2015-01-08

    CH2M HILL Plateau Remediation Company (CH2M HILL) is the U.S. Department of Energy (DOE) prime contractor responsible for the environmental cleanup of the Hanford Site Central Plateau. As part of this responsibility, the CH2M HILL is faced with the task of complying with thousands of environmental requirements which originate from over 200 federal, state, and local laws and regulations, DOE Orders, waste management and effluent discharge permits, Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) response and Resource Conservation and Recovery Act (RCRA) corrective action documents, and official regulatory agency correspondence. The challenge is to manage this vast number of requirements to ensure they are appropriately and effectively integrated into CH2M HILL operations. Ensuring compliance with a large number of environmental requirements relies on an organization’s ability to identify, evaluate, communicate, and verify those requirements. To ensure that compliance is maintained, all changes need to be tracked. The CH2M HILL identified that the existing system used to manage environmental requirements was difficult to maintain and that improvements should be made to increase functionality. CH2M HILL established an environmental requirements management procedure and tools to assure that all environmental requirements are effectively and efficiently managed. Having a complete and accurate set of environmental requirements applicable to CH2M HILL operations will promote a more efficient approach to: • Communicating requirements • Planning work • Maintaining work controls • Maintaining compliance

  11. The Army Materiel Requirements Documents: Qualitative Analysis of Efficiency and Effectiveness

    Science.gov (United States)

    2013-06-30

    65 - k~î~ä=mçëíÖê~Çì~íÉ=pÅÜççä= We measure efficiency based on two BPP initiatives: (1) Build Stronger Partnerships With the Requirements...poor,” “average,” or “excellent” based on comments received from SMEs in relation to the definitions of each BPP initiative during our interviews. A...M-ATV, and JLTV and how well they rank in terms of efficiency and effectiveness according to BPP initiatives. For efficiency, we assign a

  12. Prostatic acid phosphatase is required for the antinociceptive effects of thiamine and benfotiamine.

    Science.gov (United States)

    Hurt, Julie K; Coleman, Jennifer L; Fitzpatrick, Brendan J; Taylor-Blake, Bonnie; Bridges, Arlene S; Vihko, Pirkko; Zylka, Mark J

    2012-01-01

    Thiamine (Vitamin B1) is an essential vitamin that must be obtained from the diet for proper neurological function. At higher doses, thiamine and benfotiamine (S-benzoylthiamine O-monophosphate, BT)-a phosphorylated derivative of thiamine-have antinociceptive effects in animals and humans, although how these compounds inhibit pain is unknown. Here, we found that Prostatic acid phosphatase (PAP, ACPP) can dephosphorylate BT in vitro, in dorsal root ganglia (DRG) neurons and in primary-afferent axon terminals in the dorsal spinal cord. The dephosphorylated product S-benzoylthiamine (S-BT) then decomposes to O-benzoylthiamine (O-BT) and to thiamine in a pH-dependent manner, independent of additional enzymes. This unique reaction mechanism reveals that BT only requires a phosphatase for conversion to thiamine. However, we found that the antinociceptive effects of BT, thiamine monophosphate (TMP) and thiamine-a compound that is not phosphorylated-were entirely dependent on PAP at the spinal level. Moreover, pharmacokinetic studies with wild-type and Pap(-/-) mice revealed that PAP is not required for the conversion of BT to thiamine in vivo. Taken together, our study highlights an obligatory role for PAP in the antinociceptive effects of thiamine and phosphorylated thiamine analogs, and suggests a novel phosphatase-independent function for PAP.

  13. Prostatic acid phosphatase is required for the antinociceptive effects of thiamine and benfotiamine.

    Directory of Open Access Journals (Sweden)

    Julie K Hurt

    Full Text Available Thiamine (Vitamin B1 is an essential vitamin that must be obtained from the diet for proper neurological function. At higher doses, thiamine and benfotiamine (S-benzoylthiamine O-monophosphate, BT-a phosphorylated derivative of thiamine-have antinociceptive effects in animals and humans, although how these compounds inhibit pain is unknown. Here, we found that Prostatic acid phosphatase (PAP, ACPP can dephosphorylate BT in vitro, in dorsal root ganglia (DRG neurons and in primary-afferent axon terminals in the dorsal spinal cord. The dephosphorylated product S-benzoylthiamine (S-BT then decomposes to O-benzoylthiamine (O-BT and to thiamine in a pH-dependent manner, independent of additional enzymes. This unique reaction mechanism reveals that BT only requires a phosphatase for conversion to thiamine. However, we found that the antinociceptive effects of BT, thiamine monophosphate (TMP and thiamine-a compound that is not phosphorylated-were entirely dependent on PAP at the spinal level. Moreover, pharmacokinetic studies with wild-type and Pap(-/- mice revealed that PAP is not required for the conversion of BT to thiamine in vivo. Taken together, our study highlights an obligatory role for PAP in the antinociceptive effects of thiamine and phosphorylated thiamine analogs, and suggests a novel phosphatase-independent function for PAP.

  14. The Effects of Normothermic and Hypothermic Cardiopulmonary Bypass Upon Defibrillation Energy Requirements and Transmyocardial Impedance

    National Research Council Canada - National Science Library

    Martin, David

    1993-01-01

    .... To evaluate these questions we studied the effect of controlled hypothermia upon defibrillation energy requirements and transcardiac impedance in a canine model of cardiopulmonary bypass in which 26...

  15. 13 CFR 113.535 - Effect of state or local law or other requirements.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Effect of state or local law or other requirements. 113.535 Section 113.535 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... obligation to comply with §§ 113.500 through 113.550 is not obviated or alleviated by the existence of any...

  16. Effect of intravenous esmolol on analgesic requirements in laparoscopic cholecystectomy

    Directory of Open Access Journals (Sweden)

    Ritima Dhir

    2015-01-01

    Full Text Available Background and Aims: Perioperative beta blockers are also being advocated for modulation of acute pain and reduction of intraoperative anesthetic requirements. This study evaluated the effect of perioperative use of esmolol, an ultra short acting beta blocker, on anesthesia and modulation of post operative pain in patients of laproscopic cholecystectomy. Material and Methods: Sixty adult ASA I & II grade patients of either sex, scheduled for laparoscopic cholecystectomy under general anesthesia, were enrolled in the study. The patients were randomly allocated to one of the two groups E or C according to computer generated numbers. Group E- Patients who received loading dose of injection esmolol 0.5 mg/kg in 30 ml isotonic saline, before induction of anesthesia, followed by an IV infusion of esmolol 0.05 μg/kg/min till the completion of surgery and Group C- Patients who received 30 ml of isotonic saline as loading dose and continuous infusion of isotonic saline at the same rate as the esmolol group till the completion of surgery. Results: The baseline MAP at 0 minute was almost similar in both the groups. At 8th minute (time of intubation, MAP increased significantly in group C as compared to group E and remained higher than group E till the end of procedure. Intraoperatively, 16.67% of patients in group C showed somatic signs as compared to none in group E. The difference was statistically significant. 73.33% of patients in group C required additional doses of Inj.Fentanyl as compared to 6.67% in group E. Conclusions: We conclude that intravenous esmolol influences the analgesic requirements both intraoperatively as well as postoperatively by modulation of the sympathetic component of the pain i.e. heart rate and blood pressure.

  17. 19 CFR 200.735-123 - Effect of employees' and special Government employees' statements on other requirements.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Effect of employees' and special Government... Employment and Financial Interests § 200.735-123 Effect of employees' and special Government employees... statements required of employees and special Government employees are in addition to, and not in substitution...

  18. Requirements for effective academic leadership in Iran: A Nominal Group Technique exercise

    OpenAIRE

    Bikmoradi, Ali; Brommels, Mats; Shoghli, Alireza; Sohrabi, Zohreh; Masiello, Italo

    2008-01-01

    Abstract Background During the last two decades, medical education in Iran has shifted from elite to mass education, with a considerable increase in number of schools, faculties, and programs. Because of this transformation, it is a good case now to explore academic leadership in a non-western country. The objective of this study was to explore the views on effective academic leadership requirements held by key informants in Iran's medical education system. Methods A nominal group study was c...

  19. Effects of Differing Response-Force Requirements on Food-Maintained Responding in C57BL/6J Mice

    Science.gov (United States)

    Zarcone, Troy J.; Chen, Rong; Fowler, Stephen C.

    2009-01-01

    The effect of force requirements on response effort was examined using inbred C57BL/6J mice trained to press a disk with their snout. Lateral peak forces greater than 2 g were defined as responses (i.e., all responses above the measurement threshold). Different, higher force requirements were used to define criterion responses (a subclass of all…

  20. 15 CFR 8a.535 - Effect of state or local law or other requirements.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Effect of state or local law or other requirements. 8a.535 Section 8a.535 Commerce and Foreign Trade Office of the Secretary of Commerce... are not imposed upon members of the other sex. (b) Benefits. A recipient that provides any...

  1. Estimating required information size by quantifying diversity in random-effects model meta-analyses

    DEFF Research Database (Denmark)

    Wetterslev, Jørn; Thorlund, Kristian; Brok, Jesper

    2009-01-01

    an intervention effect suggested by trials with low-risk of bias. METHODS: Information size calculations need to consider the total model variance in a meta-analysis to control type I and type II errors. Here, we derive an adjusting factor for the required information size under any random-effects model meta......-analysis. RESULTS: We devise a measure of diversity (D2) in a meta-analysis, which is the relative variance reduction when the meta-analysis model is changed from a random-effects into a fixed-effect model. D2 is the percentage that the between-trial variability constitutes of the sum of the between...... and interpreted using several simulations and clinical examples. In addition we show mathematically that diversity is equal to or greater than inconsistency, that is D2 >or= I2, for all meta-analyses. CONCLUSION: We conclude that D2 seems a better alternative than I2 to consider model variation in any random...

  2. Extension agents' technical knowledge requirements for effective ...

    African Journals Online (AJOL)

    Technical knowledge requirements of extension agents were investigated in this study. Data for the study was collected with the aid of structured questionnaire administered to the 78 respondents. It was found that respondents were mainly males, were married, were in the middle age category, had BSc/HND, made ...

  3. Requirements for effective functional breast imaging

    International Nuclear Information System (INIS)

    Weinberg, I.N.; Zawarzin, V.; Adler, L.P.; Pani, R.; DeVincentis, G.; Khalkhali, I.; Vargas, H.; Venegas, R.; Kim, S.C.; Bakale, G.; Levine, E.; Perrier, N.; Freimanis, R.I.; Lesko, N.M.; Newman, D.P.; Geisinger, K.R.; Berg, W.A.; Masood, S.

    2003-01-01

    Most nuclear medicine physicists were trained on devices aimed at functional neuroimaging. The clinical goals of brain-centered devices differ dramatically from the parameters needed to be useful in the breast clinic. We will discuss similarities and differences that impact on design considerations, and describe our latest generation of positron emission mammography and intraoperative products. - Source of physiologic contrast: Clinical neuroimaging depends on flow agents to detect the presence of breaks in the blood-brain barrier. Breast flow agents are nonspecific, and may miss preinvasive lesions. - Resolution: Brain cancers are generally diagnosed at late stages, so resolution is not so critical. Detecting early breast cancers, and specifying margins for surgery requires 3 mm spatial resolution or better. - Prevalence: Primary brain cancer is uncommon, and lesions mimicking brain cancer are rare. Primary breast cancer is common, and benign lesions are even more common, so specificity and biopsy capability are very important. - Anatomic references: Brain structure is standard, while breast structure is highly variable, requiring immobilization/compression for physiologic imaging and biopsy. - Surgery: Complete cancer resections for brain are very rare, but are possible for breast with appropriate imaging guidance, implying the need for rapid and reliable imaging. To summarize, the breast clinic needs a rapid and highly sensitive method of assessing breast physiology, compatible with biopsy and surgery. Positron emission mammography devices, in handheld and X-ray platform based configurations, are ideal for this mission

  4. An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

    Science.gov (United States)

    Wang, Yue; Gao, Dan; Mao, Xuming

    2018-03-01

    A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

  5. Effect of power system technology and mission requirements on high altitude long endurance aircraft

    Science.gov (United States)

    Colozza, Anthony J.

    1994-01-01

    An analysis was performed to determine how various power system components and mission requirements affect the sizing of a solar powered long endurance aircraft. The aircraft power system consists of photovoltaic cells and a regenerative fuel cell. Various characteristics of these components, such as PV cell type, PV cell mass, PV cell efficiency, fuel cell efficiency, and fuel cell specific mass, were varied to determine what effect they had on the aircraft sizing for a given mission. Mission parameters, such as time of year, flight altitude, flight latitude, and payload mass and power, were also altered to determine how mission constraints affect the aircraft sizing. An aircraft analysis method which determines the aircraft configuration, aspect ratio, wing area, and total mass, for maximum endurance or minimum required power based on the stated power system and mission parameters is presented. The results indicate that, for the power system, the greatest benefit can be gained by increasing the fuel cell specific energy. Mission requirements also substantially affect the aircraft size. By limiting the time of year the aircraft is required to fly at high northern or southern latitudes, a significant reduction in aircraft size or increase in payload capacity can be achieved.

  6. Safety Requirements and Modern Technical Requirements in Human Information Systems in Amman Hotels

    OpenAIRE

    Farouq Ahmad Alazzam; Sattam Rakan Allahawiah; Mohammad Nayef Alsarayreh; Kafa Hmoud Abdallah al Nawaiseh

    2015-01-01

    This study aimed to demonstrate the availability of Safety requirements and modern technical requirements in human information systems in Amman hotels. an the most important results of this study is the availability of security and safety requirements in human information systems In Amman hotels and The adequacy of the information that it provided .and show that all departments are not connected by appropriate and effective communication networks in adequate form . Also sophisticated operatin...

  7. Prescription Drug Marketing Act of 1987; Prescription Drug Amendments of 1992; policies, requirements, and administrative procedures; delay of effective date. Final rule; delay of effective date.

    Science.gov (United States)

    2004-02-23

    The Food and Drug Administration (FDA) is further delaying, until December 1, 2006, the effective date of certain requirements of a final rule published in the Federal Register of December 3, 1999 (64 FR 67720). In the Federal Register of May 3, 2000 (65 FR 25639), the agency delayed until October 1, 2001, the effective date of certain requirements in the final rule relating to wholesale distribution of prescription drugs by distributors that are not authorized distributors of record, and distribution of blood derivatives by entities that meet the definition of a "health care entity" in the final rule. The agency further delayed the effective date of these requirements in three subsequent Federal Register notices. Most recently, in the Federal Register of January 31, 2003 (68 FR 4912), FDA delayed the effective date until April 1, 2004. This action further delays the effective date of these requirements until December 1, 2006. The final rule implements the Prescription Drug Marketing Act of 1987 (PDMA), as modified by the Prescription Drug Amendments of 1992 (PDA), and the Food and Drug Administration Modernization Act of 1997 (the Modernization Act). The agency is taking this action to address concerns about the requirements in the final rule raised by affected parties. As explained in the SUPPLEMENTARY INFORMATION section, FDA is working with stakeholders through its counterfeit drug initiative to facilitate widespread, voluntary adoption of track and trace technologies that will generate a de facto electronic pedigree, including prior transaction history back to the original manufacturer, as a routine course of business. If this technology is widely adopted, it is expected to help fulfill the pedigree requirements of the PDMA and obviate or resolve many of the concerns that have been raised with respect to the final rule by ensuring that an electronic pedigree travels with a drug product at all times. Therefore, it is necessary to delay the effective date of Sec

  8. Chitosan Oligosaccharide Reduces Propofol Requirements and Propofol-Related Side Effects

    Directory of Open Access Journals (Sweden)

    Zhiwen Li

    2016-12-01

    Full Text Available Propofol is one of the main sedatives but its negative side effects limit its clinical application. Chitosan oligosaccharide (COS, a kind of natural product with anti-pain and anti-inflammatory activities, may be a potential adjuvant to propofol use. A total of 94 patients receiving surgeries were evenly and randomly assigned to two groups: 10 mg/kg COS oral administration and/or placebo oral administration before being injected with propofol. The target-controlled infusion of propofol was adjusted to maintain the values of the bispectral index at 50. All patients’ pain was evaluated on a four-point scale and side effects were investigated. To explore the molecular mechanism for the functions of COS in propofol use, a mouse pain model was established. The activities of Nav1.7 were analyzed in dorsal root ganglia (DRG cells. The results showed that the patients receiving COS pretreatment were likely to require less propofol than the patients pretreated with placebo for maintaining an anesthetic situation (p < 0.05. The degrees of injection pain were lower in a COS-pretreated group than in a propofol-pretreated group. The side effects were also more reduced in a COS-treated group than in a placebo-pretreated group. COS reduced the activity of Nav1.7 and its inhibitory function was lost when Nav1.7 was silenced (p > 0.05. COS improved propofol performance by affecting Nav1.7 activity. Thus, COS is a potential adjuvant to propofol use in surgical anesthesia.

  9. CH2M Hill Hanford Group, Inc., Standards and Requirements Identification Document (SRID) Requirements Management System and Requirements Specification

    International Nuclear Information System (INIS)

    JOHNSON, A.L.

    2000-01-01

    The current Tank Farm Contractor (TFC) for the U. S. Department of Energy, Office of River Protection (ORP), River Protection Project (RPP), CH2M Hill Hanford Group, Inc. (CHG), will use a computer based requirements management system. The system will serve as a tool to assist in identifying, capturing, and maintaining the Standards/Requirements Identification Document (S/RID) requirements and links to implementing procedures and other documents. By managing requirements as one integrated set, CHG will be able to carry out its mission more efficiently and effectively. CHG has chosen the Dynamic Object Oriented Requirements System (DOORS(trademark)) as the preferred computer based requirements management system. Accordingly, the S/RID program will use DOORS(trademark). DOORS(trademark) will replace the Environmental Requirements Management Interface (ERMI) system as the tool for S/RID data management. The DOORS(trademark) S/RID test project currently resides on the DOORSTM test server. The S/RID project will be migrated to the DOORS(trademark) production server. After the migration the S/RID project will be considered a production project and will no longer reside on the test server

  10. Design Tools for Cost-Effective Implementation of Planetary Protection Requirements

    Science.gov (United States)

    Hamlin, Louise; Belz, Andrea; Evans, Michael; Kastner, Jason; Satter, Celeste; Spry, Andy

    2006-01-01

    Since the Viking missions to Mars in the 1970s, accounting for the costs associated with planetary protection implementation has not been done systematically during early project formulation phases, leading to unanticipated costs during subsequent implementation phases of flight projects. The simultaneous development of more stringent planetary protection requirements, resulting from new knowledge about the limits of life on Earth, together with current plans to conduct life-detection experiments on a number of different solar system target bodies motivates a systematic approach to integrating planetary protection requirements and mission design. A current development effort at NASA's Jet Propulsion Laboratory is aimed at integrating planetary protection requirements more fully into the early phases of mission architecture formulation and at developing tools to more rigorously predict associated cost and schedule impacts of architecture options chosen to meet planetary protection requirements.

  11. Molecular requirements for the combined effects of TRAIL and ionising radiation

    International Nuclear Information System (INIS)

    Marini, Patrizia; Jendrossek, Verena; Durand, Elise; Gruber, Charlotte; Budach, Wilfried; Belka, Claus

    2003-01-01

    Background and purpose: Previously it was shown that combination of death ligand TRAIL and irradiation strongly increases cell kill in several human tumour cell lines. Since Bcl-2 overexpression did not strongly interfere with the efficacy, components of the mitochondrial death pathway are not required for an effective combined treatment. In the present study the minimal molecular prerequisites for the efficacy of a combined treatment were determined. Materials and methods: Apoptosis induction in control, caspase-8 and FADD negative Jurkat cells, BJAB control and FADD-DN cells was analysed by FACS. Activation of caspase-8, -10 and -3 and cleavage of PARP was determined by immunoblotting. TRAIL receptors were activated using recombinant human TRAIL. Surface expression of TRAIL receptors DR4 and DR5 was analysed by FACS. Results: Jurkat T-cells express the agonistic DR5 receptor but not DR4. Presence of FADD was found to be essential for TRAIL induced apoptosis. Caspase-8 negative cells show very low rates of apoptosis after prolonged stimulation with TRAIL. No combined effects of TRAIL with irradiation could be found in FADD-DN over expressing and FADD deficient cells. However, the combination of TRAIL and irradiation clearly lead to a combined effect in caspase-8 negative Jurkat cells, albeit with reduced death rates. In these cells activation of the alternative initiator caspase-10 could be detected after combined treatment. Conclusion: Our data show that a combined therapy with TRAIL and irradiation will only be effective in cells expressing at least one agonistic TRAIL receptor, FADD and caspase-8 or caspase-10

  12. A comparison of immunotoxic effects of nanomedicinal products with regulatory immunotoxicity testing requirements

    Directory of Open Access Journals (Sweden)

    Giannakou C

    2016-06-01

    Full Text Available Christina Giannakou,1,2 Margriet VDZ Park,1 Wim H de Jong,1 Henk van Loveren,1,2 Rob J Vandebriel,1 Robert E Geertsma1 1Centre for Health Protection, National Institute for Public Health and the Environment (RIVM, Bilthoven, 2Department of Toxicogenomics, Maastricht University, Maastricht, the Netherlands Abstract: Nanomaterials (NMs are attractive for biomedical and pharmaceutical applications because of their unique physicochemical and biological properties. A major application area of NMs is drug delivery. Many nanomedicinal products (NMPs currently on the market or in clinical trials are most often based on liposomal products or polymer conjugates. NMPs can be designed to target specific tissues, eg, tumors. In virtually all cases, NMPs will eventually reach the immune system. It has been shown that most NMs end up in organs of the mononuclear phagocytic system, notably liver and spleen. Adverse immune effects, including allergy, hypersensitivity, and immunosuppression, have been reported after NMP administration. Interactions of NMPs with the immune system may therefore constitute important side effects. Currently, no regulatory documents are specifically dedicated to evaluate the immunotoxicity of NMs or NMPs. Their immunotoxicity assessment is performed based on existing guidelines for conventional substances or medicinal products. Due to the unique properties of NMPs when compared with conventional medicinal products, it is uncertain whether the currently prescribed set of tests provides sufficient information for an adequate evaluation of potential immunotoxicity of NMPs. The aim of this study was therefore, to compare the current regulatory immunotoxicity testing requirements with the accumulating knowledge on immunotoxic effects of NMPs in order to identify potential gaps in the safety assessment. This comparison showed that immunotoxic effects, such as complement activation-related pseudoallergy, myelosuppression, inflammasome

  13. Short-term effect of red wine (consumed during meals) on insulin requirement and glucose tolerance in diabetic patients.

    Science.gov (United States)

    Gin, H; Morlat, P; Ragnaud, J M; Aubertin, J

    1992-04-01

    To determine the effect of wine on insulin requirement or glucose tolerance. Five men with insulin-treated diabetes and 10 men with non-insulin-treated diabetes ate the same lunch with the same volume of either water or red wine (2 glasses). Insulin requirement was determined with an artificial pancreas (Biostator). Glucose tolerance was evaluated from the postprandial glycemic level. There was no significant difference in insulin requirement determined with an artificial pancreas in the insulin-treated patients after the two meals (31.5 +/- 4.21 U with water and 31.8 +/- 4.3 U with wine). Glucose tolerance in the non-insulin-treated patients was lower after the meal with wine. Moderate prandial wine consumption has no adverse effect on the glycemic control of diabetic patients. Thus, it appears unnecessary to proscribe the consumption of red wine in moderation with meals to diabetic patients. Wine contains tannins and phytates that can explain its action.

  14. Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

    Directory of Open Access Journals (Sweden)

    Abdulaziz Alsahli

    2016-01-01

    Full Text Available Requirement change management (RCM is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD.The objective of this research is to introduce an innovative approach for handling requirements and architecture changes simultaneously during global software development. The approach makes use of Case-Based Reasoning (CBR and agile practices. Agile practices make our approach iterative, whereas CBR stores requirements and makes them reusable. Twin Peaks is our base model, meaning that requirements and architecture are handled simultaneously. For this research, grounded theory has been applied; similarly, interviews from domain experts were conducted. Interview and literature transcripts formed the basis of data collection in grounded theory. Physical saturation of theory has been achieved through a published case study and developed tool. Expert reviews and statistical analysis have been used for evaluation. The proposed approach resulted in effective change management of requirements and architecture simultaneously during global software development.

  15. Basolateral amygdalar D2 receptor activation is required for the companions-exerted suppressive effect on the cocaine conditioning.

    Science.gov (United States)

    Tzeng, Wen-Yu; Cherng, Chian-Fang G; Yu, Lung; Wang, Ching-Yi

    2017-01-01

    The presence of companions renders decreases in cocaine-stimulated dopamine release in the nucleus accumbens and cocaine-induced conditioned place preference (CPP) magnitude. Limbic systems are widely believed to underlie the modulation of accumbal dopamine release and cocaine conditioning. Thus, this study aimed to assess whether intact basolateral nucleus of amygdala (BLA), dorsal hippocampus (DH), and dorsolateral striatum (DLS) is required for the companions-exerted suppressive effect on the cocaine-induced CPP. Three cage mates, serving as companions, were arranged to house with the experimental mice in the cocaine conditioning compartment throughout the cocaine conditioning sessions. Approximately 1week before the conditioning procedure, intracranial ibotenic acid infusions were done in an attempt to cause excitotoxic lesions targeting bilateral BLA, DH and DLS. Albeit their BLA, DH, and DLS lesions, the lesioned mice exhibited comparable cocaine-induced CPP magnitudes compared to the intact and sham lesion controls. Bilateral BLA, but not DH or DLS, lesions abolished the companions-exerted suppressive effect on the cocaine-induced CPP. Intact mice receiving intra-BLA infusion of raclopride, a selective D2 antagonist, 30min prior to the cocaine conditioning did not exhibit the companions-exerted suppressive effect on the cocaine-induced CPP. Intra-BLA infusion of Sch23390, a selective D1 antagonist, did not affect the companions-exerted suppressive effect on the CPP. These results, taken together, prompt us to conclude that the intactness of BLA is required for the companions-exerted suppressive effect on the cocaine-induced CPP. Importantly, activation of D2 receptor in the BLA is required for such suppressive effect on the CPP. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Anti-Money Laundering Requirements – Perceived Effectiveness

    OpenAIRE

    C. C. Huang; M. S. Amirrudin; N. A. Ahamad Noruddin; R. Othman

    2013-01-01

    Anti-money laundering is commonly recognized as a set of procedures, laws or regulations designed to reduce the practice of generating income through illegal actions. In Malaysia, the government and law enforcement agencies have stepped up their capacities and efforts to curb money laundering since 2001. One of these measures was the enactment of the Anti-Money Laundering Act (AMLA) in 2001. The implementation costs on anti-money laundering requirements (AMLR) can be burd...

  17. The Effects of Preoperative Oral Pregabalin and Perioperative Intravenous Lidocaine Infusion on Postoperative Morphine Requirement in Patients Undergoing Laparatomy

    Directory of Open Access Journals (Sweden)

    Senniye Ulgen Zengin

    2015-01-01

    Full Text Available OBJECTIVES: To evaluate and compare the effects of preoperative oral pregabalin and perioperative intravenous lidocaine infusion on postoperative morphine requirement, adverse effects, patients’ satisfaction, mobilization, time to first defecation and time to discharge in patients undergoing laparotomy.

  18. Effects of climate change on spring wheat phenophase and water requirement in Heihe River basin, China

    Science.gov (United States)

    Han, Dongmei; Yan, Denghua; Xu, Xinyi; Gao, Yu

    2017-02-01

    Climate change has significantly altered the temperature rhythm which is a key factor for the growth and phenophase of the crop. And temperature change further affects crop water requirement and irrigation system. In the north-west of China, one of the most important crop production bases is Heihe River basin where the observed phenological data is scarce. This study thus first adopted accumulated temperature threshold (ATT) method to define the phenological stages of the crop, and analysed the effect of climate change on phenological stages and water requirement of the crop during growing season. The results indicated the ATT was available for the determination of spring wheat phenological stages. The start dates of all phenological stages became earlier and the growing season length (days) was reduced by 7 days under climate change. During the growing season, water requirement without consideration of phenophase change has been increased by 26.1 mm, while that with consideration of phenophase change was featured in the decrease of water requirement by 50 mm. When temperature increased by 1°C on average, the changes were featured in the 2 days early start date of growing season, 2 days decrease of growing season length, and the 1.4 mm increase of water requirement, respectively.

  19. Capital Requirements and Banks' Leniency

    DEFF Research Database (Denmark)

    Dietrich, J. Kimball; Wihlborg, Clas

    2003-01-01

    We investigate the effect of changes in capital regulation on the strictness(leniency) of loan terms using a simple model of bank capital requirements andasset quality examinations. Banks offer different levels of `leniency' in the senseof willingness to offer automatic extensions of loans...... rates. As capital requirements increase thedifference between initial capital levels and between interest rates of strict andlenient banks decrease. Thus, higher capital requirements in recessions tend toreduce the interest rate premium paid for leniency. If a recession is interpreted asan increase...... in the required return, the interest rate premium paid for leniency isincreased in recession at a given level of required capital....

  20. An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissions

    Energy Technology Data Exchange (ETDEWEB)

    Sayin, Cenk; Kilicaslan, Ibrahim; Canakci, Mustafa; Ozsezen, Necati [Kocaeli Univ., Dept. of Mechanical Education, Izmit (Turkey)

    2005-06-01

    In this study, the effect of using higher-octane gasoline than that of engine requirement on the performance and exhaust emissions was experimentally studied. The test engine chosen has a fuel system with carburettor because 60% of the vehicles in Turkey are equipped with the carburettor. The engine, which required 91-RON (Research Octane Number) gasoline, was tested using 95-RON and 91-RON. Results show that using octane ratings higher than the requirement of an engine not only decreases engine performance but also increases exhaust emissions. (Author)

  1. Effect of long construction times on utility financial requirements

    International Nuclear Information System (INIS)

    Francis, J.M.

    1981-01-01

    It is well-known that long construction times significantly increase the cost of an individual nuclear plant. Long construction times, however, are not confined to either a single plant or a single utility. Rather, they apparently occur in almost all nuclear plants currently under construction. The total financial requirement to complete the 82 nuclear plants currently under construction was assessed. The analysis was performed assuming a construction time of ten years in one case, and six years in another. It was found that decreasing the construction time from ten to six years will reduce the financial requirements of the utility industry by $89 billion

  2. Nitric oxide is required for the insulin sensitizing effects of contraction in mouse skeletal muscle.

    Science.gov (United States)

    Zhang, Xinmei; Hiam, Danielle; Hong, Yet-Hoi; Zulli, Anthony; Hayes, Alan; Rattigan, Stephen; McConell, Glenn K

    2017-12-15

    People with insulin resistance or type 2 diabetes can substantially increase their skeletal muscle glucose uptake during exercise and insulin sensitivity after exercise. Skeletal muscle nitric oxide (NO) is important for glucose uptake during exercise, although how prior exercise increases insulin sensitivity is unclear. In the present study, we examined whether NO is necessary for normal increases in skeletal muscle insulin sensitivity after contraction ex vivo in mouse muscle. The present study uncovers, for the first time, a novel role for NO in the insulin sensitizing effects of ex vivo contraction, which is independent of blood flow. The factors regulating the increase in skeletal muscle insulin sensitivity after exercise are unclear. We examined whether nitric oxide (NO) is required for the increase in insulin sensitivity after ex vivo contractions. Isolated C57BL/6J mouse EDL muscles were contracted for 10 min or remained at rest (basal) with or without the NO synthase (NOS) inhibition (N G -monomethyl-l-arginine; l-NMMA; 100 μm). Then, 3.5 h post contraction/basal, muscles were exposed to saline or insulin (120 μU ml -1 ) with or without l-NMMA during the last 30 min. l-NMMA had no effect on basal skeletal muscle glucose uptake. The increase in muscle glucose uptake with insulin (57%) was significantly (P contraction (140% increase). NOS inhibition during the contractions had no effect on this insulin-sensitizing effect of contraction, whereas NOS inhibition during insulin prevented the increase in skeletal muscle insulin sensitivity post-contraction. Soluble guanylate cyclase inhibition, protein kinase G (PKG) inhibition or cyclic nucleotide phosphodiesterase inhibition each had no effect on the insulin-sensitizing effect of prior contraction. In conclusion, NO is required for increases in insulin sensitivity several hours after contraction of mouse skeletal muscle via a cGMP/PKG independent pathway. © 2017 The Authors. The Journal of Physiology

  3. Sevoflurane requirement during elective ankle day surgery: the effects of etirocoxib premedication, a prospective randomised study

    Directory of Open Access Journals (Sweden)

    Jakobsson Jan G

    2008-09-01

    Full Text Available Abstract Background Anti-inflammatory drugs, NSAIDs, have become an important part of the pain management in day surgery. The aim of the present study was to evaluate the effect of Coxib premedication on the intra-operative anaesthetic requirements in patients undergoing elective ankle surgery in general anaesthesia. Type of study Prospective, randomized study of the intra-operative anaesthetic-sparing effects of etoricoxib premedication as compared to no NSAID preoperatively. Methods The intra-operative requirement of sevoflurane was studied in forty-four ASA 1–2 patients undergoing elective ankle day surgical in balanced general anaesthesia. Primary study endpoint was end-tidal sevoflurane concentration to maintain Cerebral State Index of 40 – 50 during surgery. Results All anaesthesia and surgery was uneventful, no complications or adverse events were noticed. The mean end-tidal sevoflurane concentration intra-operatively was 1.25 (SD 0.2 and 0.91 (SD 0.2 for the pre and post-operative administered group of patients respectively (p Conclusion Coxib premedication before elective day surgery has an anaesthetic sparing potential.

  4. THE EFFECT OF CHANGES IN RESERVE REQUIREMENTS DURING THE 1930s:

    OpenAIRE

    Thomas Mayer; Thomas F. Cargill

    2004-01-01

    The differential response of cash reserves of member banks and nonmember banks not subject to the 1936-37 increase in reserve requirements is estimated to determine whether the 1937-38 recession was caused by the increase in reserve requirements. We identify 17 states that maintained constant reserve requirements from June 1934 to June 1941. While member banks increased their cash reserve ratios relative to nonmember banks, the magnitude of the adjustment is too small to have contributed to t...

  5. Orienting attention in visual working memory requires central capacity: decreased retro-cue effects under dual-task conditions.

    Science.gov (United States)

    Janczyk, Markus; Berryhill, Marian E

    2014-04-01

    The retro-cue effect (RCE) describes superior working memory performance for validly cued stimulus locations long after encoding has ended. Importantly, this happens with delays beyond the range of iconic memory. In general, the RCE is a stable phenomenon that emerges under varied stimulus configurations and timing parameters. We investigated its susceptibility to dual-task interference to determine the attentional requirements at the time point of cue onset and encoding. In Experiment 1, we compared single- with dual-task conditions. In Experiment 2, we borrowed from the psychological refractory period paradigm and compared conditions with high and low (dual-) task overlap. The secondary task was always binary tone discrimination requiring a manual response. Across both experiments, an RCE was found, but it was diminished in magnitude in the critical dual-task conditions. A previous study did not find evidence that sustained attention is required in the interval between cue offset and test. Our results apparently contradict these findings and point to a critical time period around cue onset and briefly thereafter during which attention is required.

  6. Land substitution effects of biofuel side products and implications on the land area requirement for EU 2020 biofuel targets

    International Nuclear Information System (INIS)

    Ozdemir, Enver Doruk; Haerdtlein, Marlies; Eltrop, Ludger

    2009-01-01

    The provision of biofuels today is based on energy crops rather than residual biomass, which results in the requirement of agricultural land area. The side products may serve as animal feed and thus prevent cultivation of other feedstock and the use of corresponding land area. These effects of biofuel provision have to be taken into account for a comprising assessment of land area requirement for biofuel provision. Between 18.5 and 21.1 Mio. hectares (ha) of land area is needed to meet the EU 2020 biofuel target depending on the biofuel portfolio when substitution effects are neglected. The utilization of the bioethanol side products distiller's dried grain and solubles (DDGS) and pressed beet slices may save up to 0.7 Mio. ha of maize cultivation area in the EU. The substitution effect due to the utilization of biodiesel side products (oil cakes of rape, palm and soy) as animal feed may account for up to 7.1 Mio. ha of soy cultivation area in Brazil. The results show that the substitution of land area due to use of side products might ease the pressures on land area requirement considerably and should therefore not be neglected in assessing the impacts of biofuel provision worldwide.

  7. The Effects of Specifying Job Requirements and Using Explicit Warnings to Decrease Sex Discrimination in Employment Interviews.

    Science.gov (United States)

    Siegfried, William D.

    1982-01-01

    To determine effectiveness of instructions designed to reduce sex discrimination in employment interviews, students were asked to rate resumes for a male and a female applicant under different instructional conditions. Results suggested that: legal warnings may bias ratings in favor of male applicants; and specifying job requirements reduces…

  8. 40 CFR 141.90 - Reporting requirements.

    Science.gov (United States)

    2010-07-01

    ... facilities and organizations to which the system delivered public education materials during the period in....82(a). (3) For systems required to evaluate the effectiveness of corrosion control treatments under... activities have taken place. (f) Public education program reporting requirements. (1) Any water system that...

  9. Many multicenter trials had few events per center, requiring analysis via random-effects models or GEEs.

    Science.gov (United States)

    Kahan, Brennan C; Harhay, Michael O

    2015-12-01

    Adjustment for center in multicenter trials is recommended when there are between-center differences or when randomization has been stratified by center. However, common methods of analysis (such as fixed-effects, Mantel-Haenszel, or stratified Cox models) often require a large number of patients or events per center to perform well. We reviewed 206 multicenter randomized trials published in four general medical journals to assess the average number of patients and events per center and determine whether appropriate methods of analysis were used in trials with few patients or events per center. The median number of events per center/treatment arm combination for trials using a binary or survival outcome was 3 (interquartile range, 1-10). Sixteen percent of trials had less than 1 event per center/treatment combination, 50% fewer than 3, and 63% fewer than 5. Of the trials which adjusted for center using a method of analysis which requires a large number of events per center, 6% had less than 1 event per center-treatment combination, 25% fewer than 3, and 50% fewer than 5. Methods of analysis that allow for few events per center, such as random-effects models or generalized estimating equations (GEEs), were rarely used. Many multicenter trials contain few events per center. Adjustment for center using random-effects models or GEE with model-based (non-robust) standard errors may be beneficial in these scenarios. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. Household energy requirement and value patterns

    International Nuclear Information System (INIS)

    Vringer, Kees; Aalbers, Theo; Blok, Kornelis

    2007-01-01

    For an effective consumer energy policy, it is important to know why some households require more energy than others. The aim of the study described here was to examine whether there is a relationship between the total household energy requirement, on one hand, and value patterns, the motivation to save energy or the problem perception of climate change, on the other. To examine these relationships, we held a consumer survey among 2304 respondent households. We did not find significant differences in the energy requirement of groups of households with different value patterns, taking into account the differences in the socio-economic situation of households. Only for the 'motivation to save energy' we did find that the least motivated group requires 10 GJ more energy than the average and most motivated groups; this is about 4% of the total household energy requirement. This means that a self-regulating energy policy, solely based on the fact that a strategy of internalising environmental responsibility will not be effective in saving energy. There are indications that a social dilemma is one of the reasons why people's consumption patterns do not conform to their value patterns, problem perception or motivation to save energy

  11. Section 5: Adapting Requirements Practices in Different Domains

    Science.gov (United States)

    Robinson, William

    Technology has a tremendous impact on society. In recent years, the Internet, World Wide Web, and Web 2.0 has changed the nature of commerce, government, and of course software development. It affects the practices of producing requirements and as well as the kinds of systems to be designed. The effect of converging technologies on the role of requirements engineering is considered in the first article by Matthias Jarke, while the effect of technology on requirements practices is considered in the second article by Walt Scacchi. Together, they provide theoretical and practical perspective on requirements engineering issues faced in a modern, technology driven world.

  12. Capturing security requirements for software systems.

    Science.gov (United States)

    El-Hadary, Hassan; El-Kassas, Sherif

    2014-07-01

    Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way.

  13. Capturing security requirements for software systems

    Directory of Open Access Journals (Sweden)

    Hassan El-Hadary

    2014-07-01

    Full Text Available Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way.

  14. Capturing security requirements for software systems

    Science.gov (United States)

    El-Hadary, Hassan; El-Kassas, Sherif

    2014-01-01

    Security is often an afterthought during software development. Realizing security early, especially in the requirement phase, is important so that security problems can be tackled early enough before going further in the process and avoid rework. A more effective approach for security requirement engineering is needed to provide a more systematic way for eliciting adequate security requirements. This paper proposes a methodology for security requirement elicitation based on problem frames. The methodology aims at early integration of security with software development. The main goal of the methodology is to assist developers elicit adequate security requirements in a more systematic way during the requirement engineering process. A security catalog, based on the problem frames, is constructed in order to help identifying security requirements with the aid of previous security knowledge. Abuse frames are used to model threats while security problem frames are used to model security requirements. We have made use of evaluation criteria to evaluate the resulting security requirements concentrating on conflicts identification among requirements. We have shown that more complete security requirements can be elicited by such methodology in addition to the assistance offered to developers to elicit security requirements in a more systematic way. PMID:25685514

  15. HTGR Industrial Application Functional and Operational Requirements

    International Nuclear Information System (INIS)

    Demick, L.E.

    2010-01-01

    This document specifies the functional and performance requirements to be used in the development of the conceptual design of a high temperature gas-cooled reactor (HTGR) based plant supplying energy to a typical industrial facility. These requirements were developed from collaboration with industry and HTGR suppliers over the preceding three years to identify the energy needs of industrial processes for which the HTGR technology is technically and economically viable. The functional and performance requirements specified herein are an effective representation of the industrial sector energy needs and an effective basis for developing a conceptual design of the plant that will serve the broadest range of industrial applications.

  16. The effect of pre-emptive gabapentin on anaesthetic and analgesic requirements in patients undergoing rhinoplasty: A prospective randomised study

    Directory of Open Access Journals (Sweden)

    Eman Ramadan Salama

    2018-01-01

    Full Text Available Background and Aims: Hypotensive anaesthesia is necessary in rhinoplasty for better visualisation of surgical field and reduction of surgery time. Gabapentin is a new generation anticonvulsant with anti-hyperalgesic and anti-nociceptive properties. We aimed to investigate the effect of pre-operative administration of oral gabapentin (1200 mg on anaesthetic requirements and post-operative analgesic consumption and its role in hypotensive anaesthesia for rhinoplasty. Methods: Seventy adult patients undergoing rhinoplasty, were randomly allocated to two groups. Group I (G I (n = 35 received gabapentin 1.2 g and Group II (G II (n = 35 received oral placebo capsules 2 h before surgery. General anaesthesia was maintained with sevoflurane in oxygen-nitrous oxide to maintain bispectral index value between 40 and 60, and remifentanil infusion to keep mean arterial pressure (MAP at 55–60 mmHg. End-tidal sevoflurane concentration, intra-operative remifentanil consumption and time to intended MAP were recorded. Visual analogue scale (VAS scores, post-operative analgesic requirements and side effects for the first 24 h were recorded. Results: G I required significantly lower intra-operative remifentanil (G I = 0.8 ± 0.26 mg and G II = 1.7 ± 0.42 mg; P = 0.001 and end-tidal sevoflurane concentration, with reduced doses of post-operative tramadol and diclofenac sodium. Time to the intended MAP was significantly less in G I than G II (59.1 ± 12.3 vs. 73.6 ± 16.4, respectively, with P = 0.001. Conclusion: Pre-operative oral gabapentin significantly reduced intra-operative remifentanil and sevoflurane requirements during hypotensive anaesthesia along with decreased post-operative analgesic requirement.

  17. Effect of wavelength, epidermal thickness and skin type on the required dose for photodynamic therapy

    CSIR Research Space (South Africa)

    Karsten, AE

    2008-10-01

    Full Text Available Effect of Wavelength, Epidermal Thickness and Skin Type on the Required Dose for Photodynamic Therapy A.E. Karsten1,2 1CSIR National Laser Centre, Biophotonics Group, PO Box 395, Pretoria, 0001, South Africa 2Physics Department, Faculty of Natural... a certain depth in the skin. For most laser treatments and diagnostics apllications, wavelengths ranging between 600 and 1 000 nm are used. 1.1 Photodynamic therapy (PDT) In South Africa, as in many other countries, cancer is a major health...

  18. Reserve Requirements and Monetary Management; An Introduction

    OpenAIRE

    International Monetary Fund

    1993-01-01

    Reserve requirements are widely used by central banks as a means to improve monetary control, an instrument for policy implementation, a source of revenue, and a safeguard of bank liquidity. The effectiveness of reserve requirements in fulfilling these functions is reviewed, and the detailed modalities of their use are examined. Reserve requirements in a sample of developing countries are described.

  19. Development of transportation operations requirements

    International Nuclear Information System (INIS)

    Grady, S.T.; Best, R.E.; Danese, F.L.; Peterson, R.W.; Pope, R.B.

    1990-01-01

    Transport conditions at various utility sties vary dramatically in terms of characteristics at and near the site, requirements, administrative procedures, and other factors. Continuation of design efforts for the OCRWM transportation operations system requires that the operating requirements for the transportation system -- quantity of fuel per unit time per site -- be identified so that the effect the variations have on the system can be accommodated. The approach outlined in this paper provides for an identification of specific sites, evaluation of shipment capabilities at each site, and integration of the sites into multi-site shipping campaigns to scope the logistics management problem for the transportation operations system. 1 fig., 1 tab

  20. [Achromatic watercolor effect: about requirement of formation of sumi painting effect].

    Science.gov (United States)

    Takashima, Midori

    2008-10-01

    The watercolor effect (Pinna, Brelstaff, & Spillmann, 2001) is a new color spreading phenomenon. Pinna et al. (2001) proposed that the watercolor effect is a new Gestalt factor because it determines figure-ground organization more strongly than classical Gestalt factors. We used achroriatic watercolor patterns and varied the lightness of the background and two border lines to study the relationship between the color spreading effect and figure-ground organization. The results demonstrated (a)a bidirectional color spreading phenomenon when the background lightness was between the two border-lines' lightness, and that (b) some patterns elicit only a color spreading effect without organization of figure-ground, while others elicit only figure-ground organization without a color spreading effect.

  1. The effects on grid matching and ramping requirements, of single and distributed PV systems employing various fixed and sun-tracking technologies

    International Nuclear Information System (INIS)

    Solomon, A.A.; Faiman, D.; Meron, G.

    2010-01-01

    In this second paper, which studies the hourly generation data from the Israel Electric Corporation for the year 2006, with a view to adding very large-scale photovoltaic power (VLS-PV) plants, three major extensions are made to the results reported in our first paper. In the first extension, PV system simulations are extended to include the cases of 1- and 2-axis sun-tracking, and 2-axis concentrator photovoltaic (CPV) technologies. Secondly, the effect of distributing VLS-PV plants among 8 Negev locations, for which hourly metrological data exist, is studied. Thirdly, in addition to studying the effect of VLS-PV on grid penetration, the present paper studies its effect on grid ramping requirements. The principal results are as follows: (i) sun-tracking improves grid matching at high but not low levels of grid flexibility; (ii) geographical distribution has little effect on grid penetration; (iii) VLS-PV significantly increases grid ramping requirements, particularly for CPV systems, but not beyond existing ramping capabilities; (iv) geographical distribution considerably ameliorates this effect.

  2. Influence of esmolol on requirement of inhalational agent using entropy and assessment of its effect on immediate postoperative pain score

    Directory of Open Access Journals (Sweden)

    Bhawna

    2012-01-01

    Full Text Available Background and Context: Beta - blockers have been used for attenuation of stress response, decreasing anaesthetic requirement and augmentation of the effect of opioids during general anaesthesia. Aims and Objectives: The present study aims to evaluate the influence of esmolol on the requirement of an inhalational agent while monitoring the depth of anaesthesia by entropy and also its effect on immediate postoperative pain score. Methods: Fifty American Society of Anaesthesiologists (ASA I and II patients, between 25 and 65 years of age who underwent lower abdominal surgeries were randomly allocated to two groups: Group E and Group S of 25 patients each. Group E received esmolol infusion while Group S received the same volume of saline infusion. Demographic data, haemodynamics, amount of isoflurane used, end-tidal isoflurane concentration, postoperative pain score and total dose of morphine consumed in immediate postoperative period of 30 min were analyzed by using appropriate statistical tests. Value of P<0.05 was considered significant and P<0.001 as highly significant. Results: The two groups were comparable with respect to age, weight, ASA physical status, duration of surgery and amount of isoflurane used during anaesthesia. Assessment of postoperative pain was assessed by Visual Analogue Scale (VAS which showed significant difference at 30 min. The total dose of morphine consumption was significantly less (P<0.05 in Group E for relief of postoperative pain. Conclusions: We conclude that in light of depth of anaesthesia monitor esmolol has no effect on requirement of isoflurane, but it decreases the postoperative pain as well as postoperative requirement of morphine without increasing the risk of awareness.

  3. Disease specific stress of tumor patients at the beginning of radiotherapy. Effect on psychosocial support requirement

    International Nuclear Information System (INIS)

    Sehlen, S.; Hollenhorst, H.; Schymura, B.; Firsching, M.; Duehmke, E.; Herschbach, P.

    2001-01-01

    Purpose: Radiotherapy brings a tumor patient into a special life situation in which different variables play a role of often unknown importance. The goal of this study was to investigate disease specific stress of tumor patients at the beginning of radiotherapy with established psychodiagnostic questionnaires and to evaluate the effect on psychosocial support requirement in order to reduce stress and to improve quality of life and compliance during radiotherapeutical treatment. Patients and Methods: 732 patients were screened, of whom 446 (60.9%) fulfilled the criteria for inclusion (refusals 21.0%, low Karnofsky performance status 6.6%, management problems 3.4%, language barriers 3.0%, cognitive restrictions 2.6%, death 2.5%). Disease specific aspects of stress in the questionnaire (Fragebogen zur Belastung von Krebspatienten, FBK), life situation (LS) and self-defined care requirements (BB) were self-rated by patients with different tumor types before radiotherapy. Medical and sociodemographic data were also documented. We investigated 446 patients (262 male, 184 female; median age 60.0 years) with different diagnoses. Results: Stress was observed mainly due to reduction of efficiency, anxiety and pain on the subscales. Women had a significant higher stress on subscales of pain (p=0.016) and anxiety (p=0.009), patients younger than 45 years in the subscale information (p=0.002) and patients older than 45 and younger than 60 years in the subscale anxiety (p=0.002) and the total score (p=0.003). Patients with mamma carcinoma had the highest stress. The maximum percentages of patients under high stress were found for the subscales of efficiency (43%) and anxiety (40%). The support requirement was characterized by the need of more medical information and dialogue with the doctor. We saw a significant correlation of high stress and high care requirement. Conclusions: Psychosocial support should be founded on psychosocial stress diagnostic and self-defined care

  4. The Modeling of Factors That Influence Coast Guard Manpower Requirements

    Science.gov (United States)

    2014-12-01

    applications, and common data warehouses needed to fully develop an effective and efficient manpower requirements engineering and management program. The... manpower requirements determination ensures a ready force, and safe and effective mission execution. Shortage or excess of manpower is the catalyst...FACTORS THAT INFLUENCE COAST GUARD MANPOWER REQUIREMENTS by Kara M. Lavin December 2014 Thesis Advisor: Ronald E. Giachetti Co-Advisor

  5. Effect of intravenous paracetamol on postoperative morphine requirements in neonates and infants undergoing major noncardiac surgery: a randomized controlled trial

    NARCIS (Netherlands)

    Ceelie, Ilse; de Wildt, Saskia N.; van Dijk, Monique; van den Berg, Margreeth M. J.; van den Bosch, Gerbrich E.; Duivenvoorden, Hugo J.; de Leeuw, Tom G.; Mathôt, Ron; Knibbe, Catherijne A. J.; Tibboel, Dick

    2013-01-01

    Continuous morphine infusion as standard postoperative analgesic therapy in young infants is associated with unwanted adverse effects such as respiratory depression. To determine whether intravenous paracetamol (acetaminophen) would significantly (>30%) reduce morphine requirements in neonates and

  6. A comparison of immunotoxic effects of nanomedicinal products with regulatory immunotoxicity testing requirements.

    Science.gov (United States)

    Giannakou, Christina; Park, Margriet Vdz; de Jong, Wim H; van Loveren, Henk; Vandebriel, Rob J; Geertsma, Robert E

    2016-01-01

    Nanomaterials (NMs) are attractive for biomedical and pharmaceutical applications because of their unique physicochemical and biological properties. A major application area of NMs is drug delivery. Many nanomedicinal products (NMPs) currently on the market or in clinical trials are most often based on liposomal products or polymer conjugates. NMPs can be designed to target specific tissues, eg, tumors. In virtually all cases, NMPs will eventually reach the immune system. It has been shown that most NMs end up in organs of the mononuclear phagocytic system, notably liver and spleen. Adverse immune effects, including allergy, hypersensitivity, and immunosuppression, have been reported after NMP administration. Interactions of NMPs with the immune system may therefore constitute important side effects. Currently, no regulatory documents are specifically dedicated to evaluate the immunotoxicity of NMs or NMPs. Their immunotoxicity assessment is performed based on existing guidelines for conventional substances or medicinal products. Due to the unique properties of NMPs when compared with conventional medicinal products, it is uncertain whether the currently prescribed set of tests provides sufficient information for an adequate evaluation of potential immunotoxicity of NMPs. The aim of this study was therefore, to compare the current regulatory immunotoxicity testing requirements with the accumulating knowledge on immunotoxic effects of NMPs in order to identify potential gaps in the safety assessment. This comparison showed that immunotoxic effects, such as complement activation-related pseudoallergy, myelosuppression, inflammasome activation, and hypersensitivity, are not readily detected by using current testing guidelines. Immunotoxicity of NMPs would be more accurately evaluated by an expanded testing strategy that is equipped to stratify applicable testing for the various types of NMPs.

  7. Regulatory requirements for radiation protection

    International Nuclear Information System (INIS)

    Mason, E.A.; Cunningham, R.E.; Hard, J.E.; Mattson, R.J.; Smith, R.D.; Peterson, H.T. Jr.

    1977-01-01

    Regulatory requirements for radiation protection have evolved and matured over several decades. Due to the wide adoption of recommendations of the International Commission on Radiation Protection (ICRP), there exists international agreement on the principles to be followed for radiation protection. This foundation will be increasingly important due to the growing need for international agreements and standards for radiation protection and radioactive materials management. During the infancy of the commercial nuclear industry, primary reliance was placed on the protection of the individual, both in the work force and as a member of the public. With the growth of nuclear power in the 1960's and 1970's, environmental impact assessments and expert reviews of bio-effects data have focused attention on statistical risks to large population groups and the use of the collective dose commitment concept to estimate potential effects. The potential release of long-lived radionuclides from the nuclear fuel cycle requires further consideration of radionuclide accumulation in the biosphere and calls for controls conceived and implemented at the international level. The initial development efforts for addressing these concerns already have been instituted by the ICRP and the IAEA. However, formal international agreements and a unified set of international standards may be required to implement the recommendations of these groups. Further international efforts in the field of radiation protection are also called for in developing waste management practices and radioactive effluent control technology, in site selection for fuel reprocessing plants and waste dispersal facilities, and for ensuring safe transport of high-level wastes in various forms. Since the regulation of very low dose rates and doses will be involved, it will be useful to reexamine dose-effect relationships and societal goals for health protection. Improved criteria and methodologies for ''as low as readily

  8. The effect of aspirin on blood loss and transfusion requirements in patients with femoral neck fractures.

    LENUS (Irish Health Repository)

    Manning, Brian J

    2012-02-03

    Although it is widely accepted that aspirin will increase the risk of intra- and post-operative bleeding, clinical studies have not consistently supported this assumption. We aimed to assess the effect of pre-operative aspirin on blood loss and transfusion requirements in patients undergoing emergency fixation of femoral neck fractures. A prospective case-control study was undertaken in patients presenting with femoral neck fractures. Parameters recorded included intra-operative blood loss, post-operative blood loss, transfusion requirements and peri-operative reduction in haemoglobin concentration. Of 89 patients presenting with femoral neck fractures 32 were on long-term aspirin therapy. Pre-operative aspirin ingestion did not significantly affect peri-operative blood loss, or change in haemoglobin concentration or haematocrit. However those patients taking aspirin pre-operatively had a significantly lower haemoglobin concentration and haematocrit and were more likely to be anaemic at presentation than those who were not receiving aspirin. Patients taking aspirin were also more likely to receive blood transfusion post-operatively.

  9. General review of quality assurance system requirements. The utility or customer requirement

    International Nuclear Information System (INIS)

    Fowler, J.L.

    1976-01-01

    What are the customer's Quality Assurance requirements and how does he convey these to his contractor, or apply them to himself. Many documents have been prepared mostly by countries with high technology availability and it is significant to note that many of the documents, particularly those of the United States of America, were prepared for nuclear safety related plant, but the logic of these documents equally applied to heavy engineering projects that are cost effective, and this is the current thinking and practice within the CEGB (Central Electricity Generating Board). Some documents have legislative backing, others rely on contractual disciplines, but they all appear to repeat the same basic requirements, so why does one continue to write more documents. The basic problem is that customers have to satisfy differing national legislative, economic and commercial requirements and, like all discerning customers, wish to reserve the right to satisfy their own needs, which are very often highly specialized. The CEGB are aware of this problem and are actively co-operating with most of the national and international authorities who are leading in this field, with a view to obtaining compatibility of requirements, but now there still remains the problem of satisfying national custom and practice. (author)

  10. The Effects of the 150-Credit-Hour Requirement for the Certified Public Accountant (CPA) Exam On the Career Intentions of Women and Minorities

    Science.gov (United States)

    Bierstaker, James Lloyd; Howe, Martha A.; Seol, Inshik

    2005-01-01

    In most states, students who sit for the certified public accountant (CPA) examination are now required to have 150 credit hours of college education. In this article, the authors examined the effects of this requirement on the career intentions of women and minorities. The authors collected data from 600 accounting students and the results…

  11. Security Requirements – Analysis of the Issue

    Directory of Open Access Journals (Sweden)

    Jhon Vincent

    2013-12-01

    Full Text Available Needs about security are matters little taken into account when managing requirements engineering , and when considered in the life cycle of the system , they tend to become a general list of functions, as password of protection , firewalls , virus detection tools , and other similar. But in fact, they cannot be considered as requirements of security, because they are implementation mechanisms to try to meet unspecified requirements, as an authenticated access. As a result, the security requirements for the system are ignored, which are required to protect essential services and assets, besides, when are specified, is not considered the prospect of future attacks. This paper describes the need for a systematic approach to managing security requirements engineering, in order to help avoid the problem of generic lists and take into account the future perspective. Several related approaches are described and also are provided references additional material that can help requirements engineers to ensure that their products be taken into account, effectively , the security requirements.

  12. The main requirements of the International Basic Safety Standards

    International Nuclear Information System (INIS)

    Webb, G.A.M.

    1998-01-01

    The main requirements of the new international basic safety standards are discussed, including such topics as health effects of ionizing radiations, the revision of basic safety standards, the requirements for radiation protection practices, the requirements for intervention,and the field of regulatory infrastructures. (A.K.)

  13. Assessing Requirements Quality through Requirements Coverage

    Science.gov (United States)

    Rajan, Ajitha; Heimdahl, Mats; Woodham, Kurt

    2008-01-01

    In model-based development, the development effort is centered around a formal description of the proposed software system the model. This model is derived from some high-level requirements describing the expected behavior of the software. For validation and verification purposes, this model can then be subjected to various types of analysis, for example, completeness and consistency analysis [6], model checking [3], theorem proving [1], and test-case generation [4, 7]. This development paradigm is making rapid inroads in certain industries, e.g., automotive, avionics, space applications, and medical technology. This shift towards model-based development naturally leads to changes in the verification and validation (V&V) process. The model validation problem determining that the model accurately captures the customer's high-level requirements has received little attention and the sufficiency of the validation activities has been largely determined through ad-hoc methods. Since the model serves as the central artifact, its correctness with respect to the users needs is absolutely crucial. In our investigation, we attempt to answer the following two questions with respect to validation (1) Are the requirements sufficiently defined for the system? and (2) How well does the model implement the behaviors specified by the requirements? The second question can be addressed using formal verification. Nevertheless, the size and complexity of many industrial systems make formal verification infeasible even if we have a formal model and formalized requirements. Thus, presently, there is no objective way of answering these two questions. To this end, we propose an approach based on testing that, when given a set of formal requirements, explores the relationship between requirements-based structural test-adequacy coverage and model-based structural test-adequacy coverage. The proposed technique uses requirements coverage metrics defined in [9] on formal high-level software

  14. Organizational Requirements in E-business

    NARCIS (Netherlands)

    Choenni, R.S.; van Leijen, H.; Bakker, R

    The integration of e-business processes with other traditional organizational processes is an important factor to serve customers effectively. Organizations must be flexible enough to cooperate with their partners. The article focuses on the two most important organizational requirements for

  15. OSHA safety requirements for hazardous chemicals in the workplace.

    Science.gov (United States)

    Dohms, J

    1992-01-01

    This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

  16. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  17. Simulate the Effect of Climate Change on Development, Irrigation Requirements and Soybean Yield in Gorgan

    Directory of Open Access Journals (Sweden)

    A.R. Nehbandani

    2016-10-01

    Full Text Available Introduction: Atmospheric CO2 concentration has continuously been increasing during the past century and it is expected to increase from current 384 ppm to 550 ppm in 2050. This increase is expected to increase global temperature by 1.4 to 5.8 oC which can have major effects on crop plants. Since both CO2 and temperature are among the most important environmental variables that regulate physiological and phenological processes in plants, it is critical to evaluate the effects of CO2 and air temperature on the growth and yield of key crop plants. Warming of Earth's atmosphere can increase dark respiration and photorespiration in C3 plants. Rate of photosynthesis is affected by temperature, Therefore, rate of biochemical reactions, morphological reactions, CO2 and energy exchange with the atmosphere could be affected by temperature. Increase in CO2 concentration causes further yield improvement in C3 plants (Such as wheat, rice and soybeans in comparison with C4 plants (Such as corn, sorghum and sugarcane. In general, increasing CO2 concentration affects plant processes in two ways:direct effect on physiological processes in plant and indirect effect by changes in temperature and rainfall. Studying climate change effects including increase in temperature and CO2 concentration can help understanding adaptation strategies to reach higher and sustainable crop yields. Therefore, the objective of this research was to examine the effects of temperature and CO2 changes on days to maturity, irrigation water requirement, and yield in soybean under irrigation conditions of Gorganusing SSM-iLegume-Soybean model. Materials and methods: The model SSM-iLegume-Soybean simulates phenological development, leaf development and senescence, crop mass production and partitioning, plant nitrogen balance, yield formation and soil water and nitrogen balances. The model includes responses of crop processes to environmental factors of solar radiation, temperature and

  18. [Effect of climate change on rice irrigation water requirement in Songnen Plain, Northeast China].

    Science.gov (United States)

    Huang, Zhi-gang; Wang, Xiao-li; Xiao, Ye; Yang, Fei; Wang, Chen-xi

    2015-01-01

    Based on meteorological data from China national weather stations and climate scenario grid data through regional climate model provided by National Climate Center, rice water requirement was calculated by using McCloud model and Penman-Monteith model combined with crop coefficient approach. Then the rice irrigation water requirement was estimated by water balance model, and the changes of rice water requirement were analyzed. The results indicated that either in historical period or in climate scenario, rice irrigation water requirement contour lines during the whole growth period and Lmid period decreased along southwest to northeast, and the same irrigation water requirement contour line moved north with decade alternation. Rice irrigation water requirement during the whole growth period increased fluctuantly with decade alternation at 44.2 mm . 10 a-1 in historical period and 19.9 mm . 10 a-1 in climate scenario. The increase in rice irrigation water requirement during the Lmid period with decade alternation was significant in historical period, but not significant in climate scenario. Contribution rate of climate change to rice irrigation water requirement would be fluctuantly increased with decade alternation in climate scenario. Compared with 1970s, contribution rates of climate change to rice irrigation water requirement were 23.6% in 2000s and 34.4% in 2040s, which increased 14.8 x 10(8) m3 irrigation water in 2000s and would increase 21.2 x 10(8) m3 irrigation water in 2040s.

  19. 20 CFR 416.1725 - Effect of your failure to comply with treatment requirements for your drug addiction or alcoholism.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Effect of your failure to comply with treatment requirements for your drug addiction or alcoholism. 416.1725 Section 416.1725 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Referral of Persons Eligible for Supplemental Security...

  20. 16 CFR 1211.7 - Inherent entrapment protection requirements.

    Science.gov (United States)

    2010-01-01

    ... from the full upmost position both with and without any external entrapment protection device... that represents the most severe operating condition. Any accessories having an effect on the intended... the requirement. The means supplied to comply with the requirement in paragraph (a) of this section...

  1. Requirements Modeling with Agent Programming

    Science.gov (United States)

    Dasgupta, Aniruddha; Krishna, Aneesh; Ghose, Aditya K.

    Agent-oriented conceptual modeling notations are highly effective in representing requirements from an intentional stance and answering questions such as what goals exist, how key actors depend on each other, and what alternatives must be considered. In this chapter, we review an approach to executing i* models by translating these into set of interacting agents implemented in the CASO language and suggest how we can perform reasoning with requirements modeled (both functional and non-functional) using i* models. In this chapter we particularly incorporate deliberation into the agent design. This allows us to benefit from the complementary representational capabilities of the two frameworks.

  2. Effects of copper on CHO cells: cellular requirements and product quality considerations.

    Science.gov (United States)

    Yuk, Inn H; Russell, Stephen; Tang, Yun; Hsu, Wei-Ting; Mauger, Jacob B; Aulakh, Rigzen P S; Luo, Jun; Gawlitzek, Martin; Joly, John C

    2015-01-01

    Recent reports highlight the impact of copper on lactate metabolism: CHO cell cultures with higher initial copper levels shift to net lactate consumption and yield lower final lactate and higher titers. These studies investigated the effects of copper on metabolite and transcript profiles, but did not measure in detail the dependences of cell culture performance and product quality on copper concentrations. To more thoroughly map these dependences, we explored the effects of various copper treatments on four recombinant CHO cell lines. In the first cell line, when extracellular copper remained above the limit of detection (LOD), cultures shifted to net lactate consumption and yielded comparable performances irrespective of the differences in copper levels; when extracellular copper dropped below LOD (∼13 nM), cultures failed to shift to net lactate consumption, and yielded significantly lower product titers. Across the four cell lines, the ability to grow and consume lactate seemed to depend on the presence of a minimum level of copper, beyond which there were no further gains in culture performance. Although this minimum cellular copper requirement could not be directly quantified, we estimated its probable range for the first cell line by applying several assumptions. Even when different copper concentrations did not affect cell culture performance, they affected product quality profiles: higher initial copper concentrations increased the basic variants in the recombinant IgG1 products. Therefore, in optimizing chemically defined media, it is important to select a copper concentration that is adequate and achieves desired product quality attributes. © 2014 American Institute of Chemical Engineers.

  3. Next Generation Microbiology Requirements

    Science.gov (United States)

    Ott, C. M.; Oubre, C. M.; Elliott, T. F.; Castro, V. A.; Pierson, D. L.

    2012-01-01

    As humans continue to explore deep into space, microorganisms will travel with them. The primary means to mitigate the risk of infectious disease are a combination of prudent spacecraft design and rigorous operational controls. The effectiveness of these methods are evaluated by microbiological monitoring of spacecraft, food, water, and the crew that is performed preflight, in-flight, and post-flight. Current NASA requirements associated with microbiological monitoring are based on culture-based methodology where microorganisms are grown on a semi-solid growth medium and enumerated. Subsequent identification of the organisms requires specialized labor and large equipment, which historically has been performed on Earth. Requirements that rely strictly on culture-based units limit the use of non-culture based monitoring technology. Specifically, the culture-based "measurement criteria" are Colony Forming Units (CFU, representing the growth of one microorganism at a single location on the agar medium) per a given volume, area, or sample size. As the CFU unit by definition is culture-based, these requirements limit alternative technologies for spaceflight applications. As spaceflight missions such as those to Mars extend further into space, culture-based technology will become difficult to implement due to the (a) limited shelf life of the culture media, (b) mass/volume necessary to carry these consumables, and (c) problems associated with the production of biohazardous material in the habitable volume of the spacecraft. In addition, an extensive amount of new knowledge has been obtained during the Space Shuttle, NASA-Mir, and International Space Station Programs, which gave direction for new or modified microbial control requirements for vehicle design and mission operations. The goal of this task is to develop and recommend a new set of requirements for vehicle design and mission operations, including microbiological monitoring, based upon "lessons learned" and new

  4. TMI-2 fuel canister interface requirements for INEL. Revision 1

    International Nuclear Information System (INIS)

    Wilkins, D.E.; Martz, D.E.; Reno, H.W.

    1984-06-01

    This report focuses on fuel canister interface requirements at INEL which should be incorporated into the canister design criteria. The requirements will ensure compatibility with existing INEL structures and equipment to be used for receipt, unloading, and storage of fuel canisters. INEL can and does receive and store radioactive materials in many different forms, including reactor fuel. INEL requires detailed descriptions of canisters and casks. Therefore, requirements listed represent engineering design features which will simplify the handling and storage operations; consequently, they are not to be viewed as absolute or non-negotiable. However, the core acquisition contract was negotiated with certain storage assumptions which effect costs of storage. Deviations from those assumptions which significantly effect costs would require approval by DOE-Idaho. If some stated requirements are too restrictive, modifications based on sound engineering principles may be negotiated with INEL. 11 figures

  5. Requirements for permitting a mixed waste incinerator

    International Nuclear Information System (INIS)

    Trichon, M.; Feldman, J.; Serne, J.C.

    1990-01-01

    The consideration, design, selection and operation of any incinerator depends primarily on characteristic quality (ultimate and proximate analyses) and quantity to the waste to be incinerated. In the case of burning any combination of mixed hazardous, biomedical and radioactive low level waste, specific federal and generic state environmental regulatory requirements are outlined. Combustion chamber temperature and waste residence time requirements will provide the rest of the envelope for consideration. Performance requirements must be balanced between the effects of time and temperature on destruction of the organic waste and the vaporization and possible emission of the inorganic waste components (e.g., toxic metals, radioactive inorganics) as operating conditions and emission levels will be set in state and federal regulatory permits. To this end the complete characterization of the subject waste stream must be determined if an accurate assessment of incineration effectiveness and impact are to be performed

  6. Metric-based method of software requirements correctness improvement

    Directory of Open Access Journals (Sweden)

    Yaremchuk Svitlana

    2017-01-01

    Full Text Available The work highlights the most important principles of software reliability management (SRM. The SRM concept construes a basis for developing a method of requirements correctness improvement. The method assumes that complicated requirements contain more actual and potential design faults/defects. The method applies a newer metric to evaluate the requirements complexity and double sorting technique evaluating the priority and complexity of a particular requirement. The method enables to improve requirements correctness due to identification of a higher number of defects with restricted resources. Practical application of the proposed method in the course of demands review assured a sensible technical and economic effect.

  7. The Effects of information barrier requirements on the trilateral initiative attribute measurement system (AVNG)

    International Nuclear Information System (INIS)

    MacArthur, D.W.; Langner, D.C.; Whiteson, R.; Wolford, J.K.

    2001-01-01

    Although the detection techniques used for measuring classified materials are very similar to those used in unclassified measurements, the surrounding packaging is generally very different. If iZ classified item is to be measured, an information barrier is required to protect any classified data acquired. This information barrier must protect the classified information while giving the inspector confidence that the unclassified outputs accurately reflect the classified inputs, Both information barrier and authentication considerations must be considered during all phases of system design and fabrication. One example of such a measurement system is the attribute measurement system (termed the AVNG) designed for the: Trilateral Initiative. We will discuss the integration of information barrier components into this system as well as the effects of an information barrier (including authentication) concerns on the implementation of the detector systems.

  8. Effect of Age on Energy Requirement for Maintenance and Growth of Dorper and Hu Crossbred F1 Ewes Weighing 20 to 50 kg

    Science.gov (United States)

    Nie, H. T.; Wan, Y. J.; You, J. H.; Wang, Z. Y.; Lan, S.; Fan, Y. X.; Wang, F.

    2015-01-01

    This research aimed to define the energy requirement of Dorper and Hu Hybrid F1 ewes 20 to 50 kg of body weight, furthermore to study energy requirement changes with age and evaluate the effect of age on energy requirement parameters. In comparative slaughter trial, thirty animals were divided into three dry matter intake treatments (ad libitum, n = 18; low restricted, n = 6; high restricted, n = 6), and were all slaughtered as baseline, intermediate, and final slaughter groups, to calculate body chemical components and energy retained. In digestibility trial, twelve ewes were housed in individual metabolic cages and randomly assigned to three feeding treatments in accordance with the design of a comparative slaughter trial, to evaluate dietary energetic values at different feed intake levels. The combined data indicated that, with increasing age, the net energy requirement for maintenance (NEm) decreased from 260.62±13.21 to 250.61±11.79 kJ/kg0.75 of shrunk body weight (SBW)/d, and metabolizable energy requirement for maintenance (MEm) decreased from 401.99±20.31 to 371.23±17.47 kJ/kg0.75 of SBW/d. Partial efficiency of ME utilization for maintenance (km, 0.65 vs 0.68) and growth (kg, 0.42 vs 0.41) did not differ (p>0.05) due to age; At the similar condition of average daily gain, net energy requirements for growth (NEg) and metabolizable energy requirements for growth (MEg) for ewes during late fattening period were 23% and 25% greater than corresponding values of ewes during early fattening period. In conclusion, the effect of age upon energy requirement parameters in the present study were similar in tendency with previous recommendations, values of energy requirement for growth (NEg and MEg) for Dorper and Hu crossbred female lambs ranged between the NRC (2007) recommendation for early and later maturating growing sheep. PMID:26104522

  9. Lowering social security's duration-of-marriage requirement: distributional effects for future female retirees.

    Science.gov (United States)

    Tamborini, Christopher R; Whitman, Kevin

    2010-01-01

    A number of alternatives to Social Security's auxiliary benefit system have been proposed in the context of changes in American family and work patterns. This article focuses on one modification therein-lowering the 10-year duration-of-marriage requirement for divorced spouses. Using a powerful microsimulation model (MINT), we examine the distributional effects of extending spouse and survivor benefit eligibility to 5- and 7-year marriages ending in divorce among female retirees in 2030, a population largely comprised of baby boomers. Results show that the options would increase benefits for a small share of female retirees, around 2 to 4%, and would not affect the vast majority of low-income divorced older women. However, of those affected, the options would substantially increase benefits and lower incidence of poverty and near poor. Low-income divorced retirees with marriages between 5 and 9 years in length and a deceased former spouse face the greatest potential gains.

  10. The effects of aprotinin on blood product transfusion associated with thoracic aortic surgery requiring deep hypothermic circulatory arrest.

    LENUS (Irish Health Repository)

    Seigne, P W

    2012-02-03

    OBJECTIVE: To compare the effects of aprotinin on blood product use and postoperative complications in patients undergoing thoracic aortic surgery requiring deep hypothermic circulatory arrest. DESIGN: A retrospective study. SETTING: A university hospital. PARTICIPANTS: Nineteen patients who underwent elective or urgent thoracic aortic surgery. INTERVENTIONS: None. MEASUREMENTS AND MAIN RESULTS: The total number of units of packed red blood cells, fresh frozen plasma, and platelets was significantly less in the group that received aprotinin (p = 0.01, 0.04, and 0.01). The intraoperative transfusion of packed red blood cells and platelets, collection and retransfusion of cell saver, and postoperative transfusion of fresh frozen plasma were also significantly less in the aprotinin group (p = 0.01, 0.02, 0.01, and 0.05). No patient in either group sustained renal dysfunction or a myocardial infarction. Two patients who had not received aprotinin suffered from chronic postoperative seizures, and one patient who had received aprotinin sustained a perioperative stroke. CONCLUSIONS: Low-dose aprotinin administration significantly decreases blood product transfusion requirements in the setting of thoracic aortic surgery requiring deep hypothermic circulatory arrest, and it does not appear to be associated with renal or myocardial dysfunction.

  11. 78 FR 17890 - Effective Date of Requirement for Premarket Approval for Automated External Defibrillator System.

    Science.gov (United States)

    2013-03-25

    ... requiring this device to meet the statute's premarket approval requirements and the benefits to the public... requiring the device to have an approved PMA or a declared completed PDP and the benefit to the public from... consider exercising enforcement discretion for devices lawfully distributed before the requirement to have...

  12. High pulmonary vascular resistance in addition to low right ventricular stroke work index effectively predicts biventricular assist device requirement.

    Science.gov (United States)

    Imamura, Teruhiko; Kinugawa, Koichiro; Kinoshita, Osamu; Nawata, Kan; Ono, Minoru

    2016-03-01

    Although the right ventricular stroke work index (RVSWI) is a good index for RV function, a low RVSWI is not necessarily an indicator for the need for a right ventricular assist device at the time of left VAD implantation. We here aimed to determine a more precise indicator for the need for a biventricular assist device (BiVAD). In total, 116 patients (mean age, 38 ± 14 years), who underwent hemodynamic assessments preoperatively including 12 BiVAD patients, and had been followed at our institute from 2003 to 2015, were included. Multivariate logistic regression analysis indicated that RVSWI and pulmonary vascular resistance (PVR) were independent predictors of BiVAD requirement (P 5 g/m, PVR 5, PVR > 3.7), (3) RV failure (RVSWI 3.7), and examined. Most of the patients in Group 4 (75 %), with acutely depressed hemodynamics and inflammatory responses in the myocardium, required BiVAD. Overall, patients with BiVAD had a worse survival rate as compared with those with LVAD alone. In conclusion, high PVR in addition to low RVSWI effectively predicts BiVAD requirement.

  13. Electrofishing power requirements in relation to duty cycle

    Science.gov (United States)

    Miranda, L.E.; Dolan, C.R.

    2004-01-01

    Under controlled laboratory conditions we measured the electrical peak power required to immobilize (i.e., narcotize or tetanize) fish of various species and sizes with duty cycles (i.e., percentage of time a field is energized) ranging from 1.5% to 100%. Electrofishing effectiveness was closely associated with duty cycle. Duty cycles of 10-50% required the least peak power to immobilize fish; peak power requirements increased gradually above 50% duty cycle and sharply below 10%. Small duty cycles can increase field strength by making possible higher instantaneous peak voltages that allow the threshold power needed to immobilize fish to radiate farther away from the electrodes. Therefore, operating within the 10-50% range of duty cycles would allow a larger radius of immobilization action than operating with higher duty cycles. This 10-50% range of duty cycles also coincided with some of the highest margins of difference between the electrical power required to narcotize and that required to tetanize fish. This observation is worthy of note because proper use of duty cycle could help reduce the mortality associated with tetany documented by some authors. Although electrofishing with intermediate duty cycles can potentially increase effectiveness of electrofishing, our results suggest that immobilization response is not fully accounted for by duty cycle because of a potential interaction between pulse frequency and duration that requires further investigation.

  14. 18 CFR 157.6 - Applications; general requirements.

    Science.gov (United States)

    2010-04-01

    ... showing the revenue responsibility for each firm rate schedule under the pipeline's currently effective... this section requires an applicant to reveal Critical Energy Infrastructure Information (CEII), as...

  15. Basic requirements to the methods of personnel monitoring

    International Nuclear Information System (INIS)

    Keirim-Markus, I.B.

    1981-01-01

    Requirements to methods of personnel monitoring (PMM) depending on irradiation conditions are given. The irradiation conditions determine subjected to monitoring types of irradiation, measurement ranges, periodicity of monitoring, operativeness of obtaining results and required accuracy. The PMM based on the photographic effect of ionizing radiation is the main method of the mass monitoring [ru

  16. Problem-Oriented Requirements in Practice

    DEFF Research Database (Denmark)

    Lauesen, Søren

    2018-01-01

    [Context and motivation] Traditional requirements describe what the system shall do. This gives suppliers little freedom to use what they have already. In contrast, problem-oriented requirements describe the customer’s demands: what he wants to use the system for and which problems he wants...... to remove. The supplier specifies how his system will deal with these issues. The author developed the problem-oriented approach in 2007 on request from the Danish Government, and named it SL-07. [Question/problem] SL-07 has been used in many projects – usually with success. However, we had no detailed re......¬ports of the effects. [Princi¬pal ideas/results] This paper is a case study of SL-07 in acquisition of a complex case-management system. The author wrote the requirements and managed the supplier selection. Next, he was asked to run the entire acquisition project, although he was a novice project manager. Some...

  17. National Land Imaging Requirements (NLIR) Pilot Project summary report: summary of moderate resolution imaging user requirements

    Science.gov (United States)

    Vadnais, Carolyn; Stensaas, Gregory

    2014-01-01

    Under the National Land Imaging Requirements (NLIR) Project, the U.S. Geological Survey (USGS) is developing a functional capability to obtain, characterize, manage, maintain and prioritize all Earth observing (EO) land remote sensing user requirements. The goal is a better understanding of community needs that can be supported with land remote sensing resources, and a means to match needs with appropriate solutions in an effective and efficient way. The NLIR Project is composed of two components. The first component is focused on the development of the Earth Observation Requirements Evaluation System (EORES) to capture, store and analyze user requirements, whereas, the second component is the mechanism and processes to elicit and document the user requirements that will populate the EORES. To develop the second component, the requirements elicitation methodology was exercised and refined through a pilot project conducted from June to September 2013. The pilot project focused specifically on applications and user requirements for moderate resolution imagery (5–120 meter resolution) as the test case for requirements development. The purpose of this summary report is to provide a high-level overview of the requirements elicitation process that was exercised through the pilot project and an early analysis of the moderate resolution imaging user requirements acquired to date to support ongoing USGS sustainable land imaging study needs. The pilot project engaged a limited set of Federal Government users from the operational and research communities and therefore the information captured represents only a subset of all land imaging user requirements. However, based on a comparison of results, trends, and analysis, the pilot captured a strong baseline of typical applications areas and user needs for moderate resolution imagery. Because these results are preliminary and represent only a sample of users and application areas, the information from this report should only

  18. Preanalytical requirements of urinalysis

    Science.gov (United States)

    Delanghe, Joris; Speeckaert, Marijn

    2014-01-01

    Urine may be a waste product, but it contains an enormous amount of information. Well-standardized procedures for collection, transport, sample preparation and analysis should become the basis of an effective diagnostic strategy for urinalysis. As reproducibility of urinalysis has been greatly improved due to recent technological progress, preanalytical requirements of urinalysis have gained importance and have become stricter. Since the patients themselves often sample urine specimens, urinalysis is very susceptible to preanalytical issues. Various sampling methods and inappropriate specimen transport can cause important preanalytical errors. The use of preservatives may be helpful for particular analytes. Unfortunately, a universal preservative that allows a complete urinalysis does not (yet) exist. The preanalytical aspects are also of major importance for newer applications (e.g. metabolomics). The present review deals with the current preanalytical problems and requirements for the most common urinary analytes. PMID:24627718

  19. International power projections and capital requirements

    International Nuclear Information System (INIS)

    Ann, H.

    1989-01-01

    This work is related to the international power projections and capital requirements of all kinds of energy and the share of electricity. It is also related to the so-called greenhouse effect carbon dioxide concentration in atmosphere. (A.C.A.S.)

  20. Hierarchical Traces for Reduced NSM Memory Requirements

    Science.gov (United States)

    Dahl, Torbjørn S.

    This paper presents work on using hierarchical long term memory to reduce the memory requirements of nearest sequence memory (NSM) learning, a previously published, instance-based reinforcement learning algorithm. A hierarchical memory representation reduces the memory requirements by allowing traces to share common sub-sequences. We present moderated mechanisms for estimating discounted future rewards and for dealing with hidden state using hierarchical memory. We also present an experimental analysis of how the sub-sequence length affects the memory compression achieved and show that the reduced memory requirements do not effect the speed of learning. Finally, we analyse and discuss the persistence of the sub-sequences independent of specific trace instances.

  1. Modeling Requirements for Simulating the Effects of Extreme Acts of Terrorism: A White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Allen, M.; Hiebert-Dodd, K.; Marozas, D.; Paananen, O.; Pryor, R.J.; Reinert, R.K.

    1998-10-01

    This white paper presents the initial requirements for developing a new computer model for simulating the effects of extreme acts of terrorism in the United States. General characteristics of the model are proposed and the level of effort to prepare a complete written description of the model, prior to coding, is detailed. The model would simulate the decision processes and interactions of complex U. S. systems engaged in responding to and recovering from four types of terrorist incidents. The incident scenarios span the space of extreme acts of terrorism that have the potential to affect not only the impacted area, but also the entire nation. The model would be useful to decision-makers in assessing and analyzing the vulnerability of the nation's complex infrastructures, in prioritizing resources to reduce risk, and in planning strategies for immediate response and for subsequent recovery from terrorist incidents.

  2. 45 CFR 1326.19 - Application requirements.

    Science.gov (United States)

    2010-10-01

    ... INDIAN TRIBES FOR SUPPORT AND NUTRITION SERVICES § 1326.19 Application requirements. A tribal... ability of the tribal organization to deliver supportive and nutrition services to older Indians, or documentation that the tribal organization has effectively administered supportive and nutrition services within...

  3. Dynamic Object Oriented Requirements System (DOORS) System Test Plan

    International Nuclear Information System (INIS)

    JOHNSON, A.L.

    2000-01-01

    The U. S. Department of Energy, Office of River Protection (ORP) will use the Dynamic Object Oriented Requirements System (DOORS) as a tool to assist in identifying, capturing, and maintaining the necessary and sufficient set of requirements for accomplishing the ORP mission. By managing requirements as one integrated set, the ORP will be able to carry out its mission more efficiently and effectively. DOORS is a Commercial-Off-The-Shelf (COTS) requirements management tool. The tool has not been customized for the use of the PIO, at this time

  4. Technological implications of fusion power: requirements and status

    International Nuclear Information System (INIS)

    Steiner, D.

    1978-01-01

    The major technological requirements for fusion power, as implied by current conceptual designs of fusion power plants, are identified and assessed relative to the goals of existing technology programs. The focus of the discussion is on the tokamak magnetic confinement concept; however, key technological requirements of mirror magnetic confinement systems and of inertial confinement concepts will also be addressed. The required technology is examined on the basis of three general areas of concern: (a) the power balance, that is, the unique power handling requirements associated with the production of electrical power by fusion; (b) reactor design, focusing primarily on the requirements imposed by a tritium-based fuel cycle, thermal hydraulic considerations, and magnet systems; and (c) materials considerations, including radiation damage effects, neutron-induced activation, and resource limitations

  5. EFFECTIVENESS OF SELECTION OF WHEAT TO MODERN REQUIREMENTS FOR SUSTAINABLE DEVELOPMENT OF AGRICULTURE III. ENERGY PRODUCTIVITY OF CROPS

    Directory of Open Access Journals (Sweden)

    Elisaveta Vasileva

    2014-03-01

    Full Text Available Aim of the study was to conclude on adaptation of modern varieties to the requirements of sustainable agriculture and hence the effectiveness of their methods of selection with respect to these requirements. The comparison between genotypes in two directions - by the selection methods by which they were established and according to the time of their creation. Energy assessment shows that the gross energy yield of grain is higher ( in average 5% over standard for varieties produced by the methods of the Intervarietal hybridization and during the period 1995 to 1999. While absolute maximum values of the energy productivity of grain (at N18 and maximum average total gross energy productivity of crops (4% above standard were detected in genotypes generated by the methods of mutagenesis by irradiation with gamma rays. Absolute maximum value of the energy productivity of crops were reported in cultivar Zdravko (at N18, which was established by the method of plant biotechnology by combining and somaclonal variation.

  6. Effects of life-history requirements on the distribution of a threatened reptile.

    Science.gov (United States)

    Thompson, Denise M; Ligon, Day B; Patton, Jason C; Papeş, Monica

    2017-04-01

    Survival and reproduction are the two primary life-history traits essential for species' persistence; however, the environmental conditions that support each of these traits may not be the same. Despite this, reproductive requirements are seldom considered when estimating species' potential distributions. We sought to examine potentially limiting environmental factors influencing the distribution of an oviparous reptile of conservation concern with respect to the species' survival and reproduction and to assess the implications of the species' predicted climatic constraints on current conservation practices. We used ecological niche modeling to predict the probability of environmental suitability for the alligator snapping turtle (Macrochelys temminckii). We built an annual climate model to examine survival and a nesting climate model to examine reproduction. We combined incubation temperature requirements, products of modeled soil temperature data, and our estimated distributions to determine whether embryonic development constrained the northern distribution of the species. Low annual precipitation constrained the western distribution of alligator snapping turtles, whereas the northern distribution was constrained by thermal requirements during embryonic development. Only a portion of the geographic range predicted to have a high probability of suitability for alligator snapping turtle survival was estimated to be capable of supporting successful embryonic development. Historic occurrence records suggest adult alligator snapping turtles can survive in regions with colder climes than those associated with consistent and successful production of offspring. Estimated egg-incubation requirements indicated that current reintroductions at the northern edge of the species' range are within reproductively viable environmental conditions. Our results highlight the importance of considering survival and reproduction when estimating species' ecological niches, implicating

  7. Effect of near-infrared-radiation reflective screen materials on ventilation requirement, crop transpiration and water use efficiency of a greenhouse rose crop

    NARCIS (Netherlands)

    Stanghellini, C.; Jianfeng, D.; Kempkes, F.L.K.

    2011-01-01

    The effect of Near Infrared (NIR)-reflective screen material on ventilation requirement, crop transpiration and water use efficiency of a greenhouse rose crop was investigated in an experiment whereby identical climate was ensured in greenhouse compartments installed with either NIR-reflective or

  8. The effect of etoricoxib premedication on postoperative analgesia requirement in orthopedic and trauma patients

    International Nuclear Information System (INIS)

    Siddiqui, Ahsan K.; Al-Ghamdi, Abdulmohsin A.; Mowafi, Hany A.; Ismail, Salah A.; Sadat-Ali, M.; Al-Dakheel, Dakheel A.

    2008-01-01

    We have hypothesized that etoricoxib premedication would reduce the need for additional opioids following orthopedic trauma surgery. A double blind, controlled study, conducted in King Fahd University Hospital, King Faisal University, Dammam, Kingdom of Saudi Arabia. After obtaining the approval of Research and Ethics Committee and written consent, 200 American Society of Anesthesiology grade I and II patients that underwent elective upper limb or lower limb fracture fixation surgeries during the period from August 2005 to October 2007 were studied. Patients were randomly premedicated using 120 mg of etoricoxib or placebo n=100, each. To alleviate postoperative pain, a patient controlled analgesia device was programmed to deliver one mg of morphine intravenously locked lockout time, 6 minutes. Visual analog scale and total postoperative morphine consumption over 24 hours and the adverse effects were recorded. One hundred patients in each group completed the study period. Etoricoxib premedication provides a statistically significant postoperative morphine sparing effect over 24 hours postoperatively. Total morphine consumption was 44.2 (8.2) in the placebo and 35.17 mg in the etoricoxib groups p<0.001. The incidence of nausea and vomiting requiring treatment was lower in the etoricoxib group. p=0.014. The postoperative blood loss was similar in both groups. Etoricoxib is a suitable premedication before traumatic orthopedic surgery as it enhanced postoperative analgesia and reduced the need for morphine. (author)

  9. The Effect of the Strictness of Consultation Requirements on Fraud Consultation

    NARCIS (Netherlands)

    Gold, A.H.; Knechel, W.R.; Wallage, P.

    2012-01-01

    We investigate how the strictness of a requirement to consult on potential client fraud affects auditors' propensity to consult with firm experts. We consider two specific forms of guidance about fraud consultations: (1) strict, i.e., mandatory and binding; and (2) lenient, i.e., advisory and

  10. The Effect of Management Compensation and Debt Requirements on Earnings Management Concerning The Impairment of Assets

    Directory of Open Access Journals (Sweden)

    Lloyd Kevin Co Abrigo

    2016-03-01

    Full Text Available This study determines the relationship between the impairment decision, as well as its magnitude, and two earnings management motivations, namely increasing management compensation, and meeting debt requirements. The computation of value in use in the impairment loss is subject to management’s estimate of future cash flows and choice of discount rate, which tolerates earnings management. Certain indicators and financial ratios were used to depict the effect of the two motives on impairment. In addition to this, the effect of firm size on impairment was also analyzed. The data were obtained from the OSIRIS database and the SEC form 17-A of the respective companies, as well as from telephone interviews and surveys. Probit regression was used to analyze the effect of the different motives to the impairment decision while multiple linear regression was used for the impairment magnitude. The findings show that publicly listed companies in the Philippines are engaging in “income smoothing” and “big bath” accounting with the use of impairment. Results also indicate that most “big bath” happens during periods where changes in the company’s executive officers occur. Lastly, there is also evidence that financially strong companies are deferring their impairment recognition to obtain a lower cost of financing.

  11. Key Design Requirements for Long-Reach Manipulators

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, D.S.

    2001-01-01

    Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional, kinematic, and performance requirements, an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented.

  12. Key design requirements for long-reach manipulators

    International Nuclear Information System (INIS)

    Kwon, D.S.; March-Leuba, S.; Babcock, S.M.; Hamel, W.R.

    1993-09-01

    Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional kinematic, and performance requirements an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented

  13. Key Design Requirements for Long-Reach Manipulators

    International Nuclear Information System (INIS)

    Kwon, D.S.

    2001-01-01

    Long-reach manipulators differ from industrial robots and teleoperators typically used in the nuclear industry in that the aspect ratio (length to diameter) of links is much greater and link flexibility, as well as joint or drive train flexibility, is likely to be significant. Long-reach manipulators will be required for a variety of applications in the Environmental Restoration and Waste Management Program. While each application will present specific functional, kinematic, and performance requirements, an approach for determining the kinematic applicability and performance characteristics is presented, with a focus on waste storage tank remediation. Requirements are identified, kinematic configurations are considered, and a parametric study of link design parameters and their effects on performance characteristics is presented

  14. Critical Review of NOAA's Observation Requirements Process

    Science.gov (United States)

    LaJoie, M.; Yapur, M.; Vo, T.; Templeton, A.; Bludis, D.

    2017-12-01

    NOAA's Observing Systems Council (NOSC) maintains a comprehensive database of user observation requirements. The requirements collection process engages NOAA subject matter experts to document and effectively communicate the specific environmental observation measurements (parameters and attributes) needed to produce operational products and pursue research objectives. User observation requirements documented using a structured and standardized manner and framework enables NOAA to assess its needs across organizational lines in an impartial, objective, and transparent manner. This structure provides the foundation for: selecting, designing, developing, acquiring observing technologies, systems and architectures; budget and contract formulation and decision-making; and assessing in a repeatable fashion the productivity, efficiency and optimization of NOAA's observing system enterprise. User observation requirements are captured independently from observing technologies. Therefore, they can be addressed by a variety of current or expected observing capabilities and allow flexibility to be remapped to new and evolving technologies. NOAA's current inventory of user observation requirements were collected over a ten-year period, and there have been many changes in policies, mission priorities, and funding levels during this time. In light of these changes, the NOSC initiated a critical, in-depth review to examine all aspects of user observation requirements and associated processes during 2017. This presentation provides background on the NOAA requirements process, major milestones and outcomes of the critical review, and plans for evolving and connecting observing requirements processes in the next year.

  15. Identification of Evidence for Key Parameters in Decision-Analytic Models of Cost Effectiveness: A Description of Sources and a Recommended Minimum Search Requirement.

    Science.gov (United States)

    Paisley, Suzy

    2016-06-01

    This paper proposes recommendations for a minimum level of searching for data for key parameters in decision-analytic models of cost effectiveness and describes sources of evidence relevant to each parameter type. Key parameters are defined as treatment effects, adverse effects, costs, resource use, health state utility values (HSUVs) and baseline risk of events. The recommended minimum requirement for treatment effects is comprehensive searching according to available methodological guidance. For other parameter types, the minimum is the searching of one bibliographic database plus, where appropriate, specialist sources and non-research-based and non-standard format sources. The recommendations draw on the search methods literature and on existing analyses of how evidence is used to support decision-analytic models. They take account of the range of research and non-research-based sources of evidence used in cost-effectiveness models and of the need for efficient searching. Consideration is given to what constitutes best evidence for the different parameter types in terms of design and scientific quality and to making transparent the judgments that underpin the selection of evidence from the options available. Methodological issues are discussed, including the differences between decision-analytic models of cost effectiveness and systematic reviews when searching and selecting evidence and comprehensive versus sufficient searching. Areas are highlighted where further methodological research is required.

  16. Prescription Drug Marketing Act of 1987; Prescription Drug Amendments of 1992; policies, requirements, and administrative procedures; delay of effective date; reopening of administrative record. Food and Drug Administration, HHS. Final rule; delay of effective date; reopening of administrative record.

    Science.gov (United States)

    2000-05-03

    The Food and Drug Administration (FDA) is delaying until October 1, 2001, the effective date and reopening the administrative record to receive additional comments regarding certain requirements of a final rule published in the Federal Register of December 3, 1999 (64 FR 67720). The other provisions of the final rule become effective on December 4, 2000. The final rule implements the Prescription Drug Marketing Act of 1987 (PDMA), as modified by the Prescription Drug Amendments of 1992 (PDA) and the FDA Modernization Act of 1997 (the Modernization Act). FDA is delaying the effective date for certain requirements relating to wholesale distribution of prescription drugs by distributors that are not authorized distributors of record. FDA is also delaying the effective date of another requirement that would prohibit blood centers functioning as "health care entities" to act as wholesale distributors of blood derivatives. The agency is taking this action to address numerous concerns about the provisions raised by affected parties.

  17. 26 CFR 1.303-2 - Requirements.

    Science.gov (United States)

    2010-04-01

    ... estate tax or any other estate, inheritance, legacy, or succession tax shall be ascertained after the... Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Effects on Recipients § 1.303-2 Requirements. (a) Section 303 applies only where the distribution...

  18. 42 CFR 422.352 - Basic requirements.

    Science.gov (United States)

    2010-10-01

    ...) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Provider-Sponsored Organizations § 422.352 Basic requirements... effectively controlled by the provider or, in the case of a group, by one or more of the affiliated providers... provider or the affiliated providers responsible for operating the PSO. Substantial proportion means— (1...

  19. Sample size requirements for one-year treatment effects using deep gray matter volume from 3T MRI in progressive forms of multiple sclerosis.

    Science.gov (United States)

    Kim, Gloria; Chu, Renxin; Yousuf, Fawad; Tauhid, Shahamat; Stazzone, Lynn; Houtchens, Maria K; Stankiewicz, James M; Severson, Christopher; Kimbrough, Dorlan; Quintana, Francisco J; Chitnis, Tanuja; Weiner, Howard L; Healy, Brian C; Bakshi, Rohit

    2017-11-01

    The subcortical deep gray matter (DGM) develops selective, progressive, and clinically relevant atrophy in progressive forms of multiple sclerosis (PMS). This patient population is the target of active neurotherapeutic development, requiring the availability of outcome measures. We tested a fully automated MRI analysis pipeline to assess DGM atrophy in PMS. Consistent 3D T1-weighted high-resolution 3T brain MRI was obtained over one year in 19 consecutive patients with PMS [15 secondary progressive, 4 primary progressive, 53% women, age (mean±SD) 50.8±8.0 years, Expanded Disability Status Scale (median, range) 5.0, 2.0-6.5)]. DGM segmentation applied the fully automated FSL-FIRST pipeline ( http://fsl.fmrib.ox.ac.uk ). Total DGM volume was the sum of the caudate, putamen, globus pallidus, and thalamus. On-study change was calculated using a random-effects linear regression model. We detected one-year decreases in raw [mean (95% confidence interval): -0.749 ml (-1.455, -0.043), p = 0.039] and annualized [-0.754 ml/year (-1.492, -0.016), p = 0.046] total DGM volumes. A treatment trial for an intervention that would show a 50% reduction in DGM brain atrophy would require a sample size of 123 patients for a single-arm study (one-year run-in followed by one-year on-treatment). For a two-arm placebo-controlled one-year study, 242 patients would be required per arm. The use of DGM fraction required more patients. The thalamus, putamen, and globus pallidus, showed smaller effect sizes in their on-study changes than the total DGM; however, for the caudate, the effect sizes were somewhat larger. DGM atrophy may prove efficient as a short-term outcome for proof-of-concept neurotherapeutic trials in PMS.

  20. Effects and costs of requiring child-restraint systems for young children traveling on commercial airplanes.

    Science.gov (United States)

    Newman, Thomas B; Johnston, Brian D; Grossman, David C

    2003-10-01

    The US Federal Aviation Administration is planning a new regulation requiring children younger than 2 years to ride in approved child-restraint seats on airplanes. To estimate the annual number of child air crash deaths that might be prevented by the proposed regulation, the threshold proportion of families switching from air to car travel above which the risks of the policy would exceed its benefits, and the cost per death prevented. Risk and economic analyses. Child-restraint seat use could prevent about 0.4 child air crash deaths per year in the United States. Increased deaths as a result of car travel could exceed deaths prevented by restraint seat use if the proportion of families switching from air to car travel exceeded about 5% to 10%. The estimate for this proportion varied with assumptions about trip distance, driver characteristics, and the effectiveness of child-restraint seats but is unlikely to exceed 15%. Assuming no increase in car travel, for each dollar increase in the cost of implementing the regulation per round trip per family, the cost per death prevented would increase by about $6.4 million. Unless space for young children in restraint seats can be provided at low cost to families, with little or no diversion to automobile travel, a policy requiring restraint seat use could cause a net increase in deaths. Even excluding this possibility, the cost of the proposed policy per death prevented is high.

  1. 48 CFR 301.603-73 - Additional HHS training requirements.

    Science.gov (United States)

    2010-10-01

    ... Contract Specialist is not required to take the class as long as the Contract Specialist is working under... requirements. 301.603-73 Section 301.603-73 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... each be 8 hours or more in length. (b) Performance based acquisition training. Effective January 1...

  2. Transforming Multidisciplinary Customer Requirements to Product Design Specifications

    Science.gov (United States)

    Ma, Xiao-Jie; Ding, Guo-Fu; Qin, Sheng-Feng; Li, Rong; Yan, Kai-Yin; Xiao, Shou-Ne; Yang, Guang-Wu

    2017-09-01

    With the increasing of complexity of complex mechatronic products, it is necessary to involve multidisciplinary design teams, thus, the traditional customer requirements modeling for a single discipline team becomes difficult to be applied in a multidisciplinary team and project since team members with various disciplinary backgrounds may have different interpretations of the customers' requirements. A new synthesized multidisciplinary customer requirements modeling method is provided for obtaining and describing the common understanding of customer requirements (CRs) and more importantly transferring them into a detailed and accurate product design specifications (PDS) to interact with different team members effectively. A case study of designing a high speed train verifies the rationality and feasibility of the proposed multidisciplinary requirement modeling method for complex mechatronic product development. This proposed research offersthe instruction to realize the customer-driven personalized customization of complex mechatronic product.

  3. Are functional foods redefining nutritional requirements?

    Science.gov (United States)

    Jones, Peter J; Varady, Krista A

    2008-02-01

    Functional foods are increasing in popularity owing to their ability to confer health and physiological benefits. Nevertheless, the notion that functional foods improve health when providing nutrients at levels above and beyond existing recommended intakes is inconsistent with the definition of requirement. This disparity highlights the need for an alternative definition of nutrient requirement. The present objective is to examine distinctions between optimization of health, as defined by what we currently deem as required intakes, versus adding physiological benefit using bioactive agents found in functional foods. Presently, requirement is defined as the lowest amount of intake of a nutrient that will maintain a defined level of nourishment for a specific indicator of adequacy. In contrast, functional foods are described as ingredients that are not necessary for body function, yet provide added physiological benefit that confer better overall health. Plant sterols are one example of such an ingredient. Plant sterols lower plasma cholesterol concentrations, and may thus be considered essential nutrients in physiological situations where circulating cholesterol concentrations are high. Similarly, intakes of omega-3 fats beyond existing requirement may confer additional health benefits such as hypolipidemic and anti-diabetic effects. These examples underscore the inconsistencies between what is defined as a nutrient requirement versus what is identified as a health benefit of a functional food. Such discrepancies emphasize the need for a more all-encompassing definition of a nutrient requirement; that is, one that moves beyond the prevention of overt deficiency to encompass improved health and disease risk reduction.

  4. THE EFFECTS OF INTRATHECAL NEOSTIGMINE ADDED TO BUPIVACAINE ON POSTOPERATIVE ANALGESIC REQUIREMENT IN PATIENTS UNDERGOING LOWER LIMB ORTHOPEDIC SURGERY.

    Science.gov (United States)

    Kayalha, Hamid; Mousavi, Zinat; Sadat Barikani, Ameneh; Yaghoobi, Siamak; Khezri, Marzieh Beigom

    2015-06-01

    Several additives have been suggested to enhance analgesic effect of local anesthetic agents to decrease the adverse effects of them and increase the degree of satisfaction. We designed this randomized double-blind controlled study to evaluate the analgesic efficacy of the neostigmine added to bupivacaine using spinal anesthesia in patients undergoing lower limb orthopedic surgery. Sixty patients 18-80 yr old American Society of Anesthesiologists (ASA) physical status I or II, scheduled for femur surgery under spinal anesthesia, were recruited in a prospective, double-blinded, randomized way. The patients were randomly allocated to one of two groups of 30 each. The neostigmine group (group N) received bupivacaine 20 mg combined with 25 µg neostigmine, and the placebo group (group C) received bupivacaine 20 mg combined with 0.5ml distilled water (intrathecally) 5 minutes prior to surgery. The time to the first analgesic request, analgesic requirement in the first 12 hours after surgery, the duration of sensory and motor blockade, the incidence of adverse effects such as nausea,vomiting,hypotension, ephedrine requirements, bradycardia, and hypoxemia were recorded. Patients receiving neostigmine had a significantly prolonged duration of motor block (C95% CI 30.27 to 87.65; P < 0.001) and sensory block (C95% CI 101.04 to 224.64; P < 0.001) compared to the control group. The difference of the mean time to the first analgesic request was also significantly longer in neostigmine group (C95% CI 83.139 to 208.526; P < 0.001). The total analgesic consumption during the first 12 hours after surgery was devoid of any significant difference between groups N and C (p = 0.41).The two groups were not significantly different in terms of intraoperative and postoperative side effects. Intrathecal neostigmine 25 µg with bupivacaine caused a prolonged time to the first analgesic request and its use was not associated with any side effects.

  5. Effects of Requiring Physical Fitness in a Lecture-Based College Course: Students' Attitudes toward Physical Activity

    Science.gov (United States)

    Esslinger, Keri A.; Grimes, Amanda R.; Pyle, Elizabeth

    2016-01-01

    In this study, we investigated students' attitudes toward physical activity (PA) when including a required PA component in a university-required personal wellness class. The study included (a) an experimental group of students enrolled in a personal wellness course in which there was a required PA requirement and (b) a control group of students…

  6. Water requirements of the aluminum industry

    Science.gov (United States)

    Conklin, Howard L.

    1956-01-01

    Aluminum is unique among metals in the way it is obtained from its ore. The first step is to produce alumina, a white powder that bears no resemblance to the bauxite from which it is derived or to the metallic aluminum to which it is reduced by electrolytic action in a second step. Each step requires a complete plant facility, and the plants may be adjacent or separated by as much as the width of the North American continent. Field investigations sf every alumina plant and reduction works in the United States were undertaken to determine the industry's water use. Detailed studies were made of process and plant layout so that a water balance could be made for each plant to determine not only the gross water intake but also an approximation of the consumptive use of water. Water requirements of alumina plants range from 0.28 to 1.10 gallons per pound of alumina; the average for the industry is 0.66 gallon. Water requirements of reduction works vary considerably more, ranging from 1.24 to 36.33 gallons per pound of aluminum, and average 14.62 gallons. All alumina plants in the United States derive alumina from bauxite by the Bayer process or by the Combination process, a modification of the Bayer process. Although the chemical process for obtaining alumina from bauxite is essentially the same at all plants, different procedures are employed to cool the sodium aluminate solution before it enters the precipitating tanks and to concentrate it by evaporation of some of the water in the solution. Where this evaporation takes place in a cooling tower, water in the solution is lost to the atmosphere as water vapor and so is used consumptively. In other plants, the quantity of solution in the system is controlled by evaporation in a multiple-effect evaporator where practically all vapor distilled out of the solution is condensed to water that may be reused. The latter method is used in all recently constructed alumina plants, and some older plants are replacing cooling towers

  7. Prescription drugs for human use generally recognized as safe and effective and not misbranded: drugs used in research: radioactive drugs for certain research uses; amended reporting requirements

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    This amendment revises the reporting requirements for research studies in which radioactive drugs are used. It deletes the requirement for detailed measurements and calculations for each subject in the study; instead, it permits submission of data on a representative subject. The effect will be to decrease the burden in reporting required of the Radioactive Drug Research Committee, but still provide the agency with data to evaluate the risk attributable to radioactive drugs

  8. Standards applicable to owners and operators of hazardous waste treatment, storage, and disposal facilities; liability coverage requirements--Environmental Protection Agency. Final rule and notice of extension of effective date.

    Science.gov (United States)

    1982-07-13

    The effective date for qualifications of insurers providing liability insurance used to satisfy liability coverage requirements applicable to owners or operators of hazardous waste management facilities, as such requirements are included in 40 CFR Parts 264 and 265, is extended from July 15, 1982, to October 16, 1982. The effective date for the rest of the liability coverage requirements remains July 15, 1982. This extension is being provided to allow 6 months between the date of promulgation and the effective date for the insurer qualification provision, in accordance with Section 3010(b) of the Resource Conservation and Recovery Act of 1976, as amended. During the period between July 15 and October 16, 1982, owners or operators may use certificates of insurance or policy endorsements that do not certify to the qualifications of the insurer.

  9. Research requirements for a unified approach to modelling chemical effects associated with radioactive waste disposal

    International Nuclear Information System (INIS)

    Krol, A.A.; Read, D.

    1986-09-01

    This report contains the results of a review of the current modelling, laboratory experiments and field experiments being conducted in the United Kingdom to aid understanding and improve prediction of the effects of chemistry on the disposal of radioactive wastes. The aim has been to summarise present work and derive a structure for future research effort that would support the use of probabilistic risk assessment (pra) methods for the disposal of radioactive wastes. The review was conducted by a combination of letter and personal visits, and preliminary results were reported to a plenary meeting of participants held in April, 1986. Following this meeting, copies of the report were circulated to participants at draft stage, so that the finalised report should be taken to provide as far as possible a consensus of opinion of research requirements. (author)

  10. Cross sections required for FMIT dosimetry

    International Nuclear Information System (INIS)

    Gold, R.; McElroy, W.N.; Lippincott, E.P.; Mann, F.M.; Oberg, D.L.; Roberts, J.H.; Ruddy, F.H.

    1980-01-01

    The Fusion Materials Irradiation Test (FMIT) facility, currently under construction, is designed to produce a high flux of high energy neutrons for irradiation effects experiments on fusion reactor materials. Characterization of the flux-fluence-spectrum in this rapidly varying neutron field requires adaptation and extension of currently available dosimetry techniques. This characterization will be carried out by a combination of active, passive, and calculational dosimetry. The goal is to provide the experimenter with accurate neutron flux-fluence-spectra at all positions in the test cell. Plans have been completed for a number of experimental dosimetry stations and provision for these facilities has been incorporated into the FMIT design. Overall needs of the FMIT irradiation damage program delineate goal accuracies for dosimetry that, in turn, create new requirements for high energy neutron cross section data. Recommendations based on these needs have been derived for required cross section data and accuracies

  11. Automatic Visualization of Software Requirements: Reactive Systems

    International Nuclear Information System (INIS)

    Castello, R.; Mili, R.; Tollis, I.G.; Winter, V.

    1999-01-01

    In this paper we present an approach that facilitates the validation of high consequence system requirements. This approach consists of automatically generating a graphical representation from an informal document. Our choice of a graphical notation is statecharts. We proceed in two steps: we first extract a hierarchical decomposition tree from a textual description, then we draw a graph that models the statechart in a hierarchical fashion. The resulting drawing is an effective requirements assessment tool that allows the end user to easily pinpoint inconsistencies and incompleteness

  12. Pharmaceutical strategic purchasing requirements in Iran: Price interventions and the related effective factors.

    Science.gov (United States)

    Bastani, Peivand; Dinarvand, Rasoul; SamadBeik, Mahnaz; Pourmohammadi, Kimia

    2016-01-01

    Pharmaceutical access for the poor is an essential factor in developing countries that can be improved through strategic purchasing. This study was conducted to identify the elements affecting price in order to enable insurance organizations to put strategic purchasing into practice. This was a qualitative study conducted through content analysis with an inductive approach applying a five-stage framework analysis (familiarization, identifying a thematic framework, indexing, mapping, and interpretation). Data analysis was started right after transcribing each interview applying ATLAS.ti. Data were saturated after 32 semi-structured interviews by experts. These key informants were selected purposefully and through snowball sampling. Findings showed that there are four main themes as Pharmaceutical Strategic Purchasing Requirements in Iran as follows essential and structural factors, international factors, economical factors, and legal factors. Moreover, totally 14 related sub-themes were extracted in this area as the main effective variables. It seems that paying adequate attention to the four present themes and 14 sub-themes affecting price can enable health system policy-makers of developing countries like Iran to make the best decisions through strategic purchasing of drugs by the main insurers in order to improve access and health in the country.

  13. Field-flood requirements for emission computed tomography with an Anger camer

    International Nuclear Information System (INIS)

    Rogers, W.L.; Clinthorne, N.H.; Harkness, B.A.; Koral, K.F.; Keyes, J.W. Jr.

    1982-01-01

    Emission computed tomography with a rotating camera places stringent requirements on camera uniformity and the stability of camera response. In terms of clinical tomographic imaging, we have studied the statistical accuracy required for camera flood correction, the requirements for flood accuracy, the utility and validity of flood and data image smoothing to reduce random noise effects, and the magnitude and effect of camera variations as a function of angular position, energy window, and tuning. Uniformity of the corrected flood response must be held to better than 1% to eliminate image artifacts that are apparent in a million-count image of a liver slice. This requires calibration with an accurate, well-mixed flood source. Both random fluctuations and variations in camera response with rotation must be kept below 1%. To meet the statistical limit, one requires at least 30 million counts for the flod-correction image. Smoothing the flood image alone introduces unacceptable image artifacts. Smoothing both the flood image and data, however, appears to be a good approach toward reducing noise effects. Careful camera tuning and magnetic shield design provide camera stability suitable for present clinical applications

  14. 47 CFR 90.203 - Certification required.

    Science.gov (United States)

    2010-10-01

    ... certificated for use under this part. (1) Effective October 16, 2002, except in the 1427-1432 MHz band, an equipment approval may no longer be obtained for in-hospital medical telemetry equipment operating under the provisions of this part. The requirements for obtaining an approval for medical telemetry equipment after...

  15. A safeguards program for implementing Department of Energy requirements

    International Nuclear Information System (INIS)

    Erkkila, B.H.

    1989-01-01

    The U.S. Department of Energy (DOE) issued a new materials control and accountability (MC ampersand A) order 5633.3 in February of 1988. This order contains all of the requirements for an effective MC ampersand A (safeguards) program for facilities that control and account for nuclear materials in their operations. All contractors were expected to come into compliance with the order by April 30, 1989, or obtain approval for exceptions and/or extensions. The order also contains various performance requirements that are not in effect until the DOE issues the guidelines to the performance requirements. After evaluations were completed in February 1989, it was determined there were several deficiencies in the Los Alamos National Laboratory's (LANL's) safeguards program. Documentation of policy and procedures needed correction before LANL could be in compliance with the new MC ampersand A order. Differences between the old and new orders were addressed. After this determination, action teams were established to corrected LANL's safeguards program. Compliance with the DOE requirements was the goal of this activity. The accomplishments of the action teams are the subject of this paper

  16. Exploiting a Goal-Decomposition Technique to Prioritize Non-functional Requirements

    NARCIS (Netherlands)

    Daneva, Maia; Kassab, M.; Ponisio, Laura; Wieringa, Roelf J.; Ormandjieva, O.; Alves Frota, C.; Werneck, V.; Cysneyros, L.M.

    2007-01-01

    Business stakeholders need to have clear and realistic goals if they want to meet commitments in application development. As a consequence, at early stages they prioritize requirements. However, requirements do change. The effect of change forces the stakeholders to balance alternatives and

  17. The effect of joystick handle size and gain at two levels of required precision on performance and physical load on crane operators

    NARCIS (Netherlands)

    Huysmans, M.A.; Looze, M.P. de; Hoozemans, M.J.M.; Beek, A.J. van der; Dieën, J.H. van

    2006-01-01

    The study was designed to determine the effect of joystick handle size and (display-control) gain at two levels of required task precision on performance and physical load on crane operators. Eight experienced crane operators performed a simulated crane operation task on a computer by use of a

  18. Feed evaluation, nitrogen requirements and the effect of supplementary feeding on the performance of small ruminants in Cyprus

    International Nuclear Information System (INIS)

    Hadjipanayiotou, M.

    1988-01-01

    Experiments were carried out to evaluate the quality of various sources of roughage available in Cyprus as well as to determine the protein requirements of milk producing sheep and goats. Throughout the experimental programme comparisons were made between sheep and goats. A range of gramineous and leguminous hays were fed to Chios sheep in order to measure the digestibility of different constituents and digestible energy values. These hays were analysed chemically and digestibility was estimated in vitro. The leguminous hays were of higher digestibility (66.5%) than the gramineous (57.0%) despite having higher concentrations of acid detergent lignin (5.95 vs. 3.55%). There was good correlation between in vivo and in vitro measurements of digestibility. A series of experiments was conducted to measure various aspects of protein quality and requirements for production. In field trials, grazing goats were fed supplements of barley with or without a protein/mineral supplement. The inclusion of the protein/mineral supplement improved performance in suckling goats but not during pregnancy or mid-lactation. The mean retention time of protein in the rumen of lactating and dry ewes and goats was estimated using Cr-labelled soybean meal. Effective digestibility values (degradability values related to outflow rates) were similar in the two species, but were greater in lactating than dry animals. The requirements for protein in dairy goats were determined at various stages of lactation. In early lactation approximately 140 g CP/kg feed DM were required compared to around 100 g in late lactation. Two sources of protein, soybean and fishmeal, were compared in diets for ewes and goats. Significantly higher milk production was observed in ewes fed fishmeal but not in goats. (author). 29 refs, 9 tabs

  19. Anticipating requirements changes-using futurology in requirements elicitation

    OpenAIRE

    Pimentel, João Henrique; Santos, Emanuel; Castro, Jaelson; Franch Gutiérrez, Javier

    2012-01-01

    It is well known that requirements changes in a later phase of software developments is a major source of software defects and costs. Thus, the need of techniques to control or reduce the amount of changes during software development projects. The authors advocate the use of foresight methods as a valuable input to requirements elicitation, with the potential to decrease the number of changes that would be required after deployment, by anticipating them. In this paper, the authors define a pr...

  20. Compliance to two city convenience store ordinance requirements

    Science.gov (United States)

    Menéndez, Cammie K Chaumont; Amandus, Harlan E; Wu, Nan; Hendricks, Scott A

    2015-01-01

    Background Robbery-related homicides and assaults are the leading cause of death in retail businesses. Robbery reduction approaches focus on compliance to Crime Prevention Through Environmental Design (CPTED) guidelines. Purpose We evaluated the level of compliance to CPTED guidelines specified by convenience store safety ordinances effective in 2010 in Dallas and Houston, Texas, USA. Methods Convenience stores were defined as businesses less than 10 000 square feet that sell grocery items. Store managers were interviewed for store ordinance requirements from August to November 2011, in a random sample of 594 (289 in Dallas, 305 in Houston) convenience stores that were open before and after the effective dates of their city’s ordinance. Data were collected in 2011 and analysed in 2012–2014. Results Overall, 9% of stores were in full compliance, although 79% reported being registered with the police departments as compliant. Compliance was consistently significantly higher in Dallas than in Houston for many requirements and by store type. Compliance was lower among single owner-operator stores compared with corporate/franchise stores. Compliance to individual requirements was lowest for signage and visibility. Conclusions Full compliance to the required safety measures is consistent with industry ‘best practices’ and evidence-based workplace violence prevention research findings. In Houston and Dallas compliance was higher for some CPTED requirements but not the less costly approaches that are also the more straightforward to adopt. PMID:26337569

  1. Defining Requirements and Related Methods for Designing Sensorized Garments

    Directory of Open Access Journals (Sweden)

    Giuseppe Andreoni

    2016-05-01

    Full Text Available Designing smart garments has strong interdisciplinary implications, specifically related to user and technical requirements, but also because of the very different applications they have: medicine, sport and fitness, lifestyle monitoring, workplace and job conditions analysis, etc. This paper aims to discuss some user, textile, and technical issues to be faced in sensorized clothes development. In relation to the user, the main requirements are anthropometric, gender-related, and aesthetical. In terms of these requirements, the user’s age, the target application, and fashion trends cannot be ignored, because they determine the compliance with the wearable system. Regarding textile requirements, functional factors—also influencing user comfort—are elasticity and washability, while more technical properties are the stability of the chemical agents’ effects for preserving the sensors’ efficacy and reliability, and assuring the proper duration of the product for the complete life cycle. From the technical side, the physiological issues are the most important: skin conductance, tolerance, irritation, and the effect of sweat and perspiration are key factors for reliable sensing. Other technical features such as battery size and duration, and the form factor of the sensor collector, should be considered, as they affect aesthetical requirements, which have proven to be crucial, as well as comfort and wearability.

  2. Requirements Engineering as Creative Problem Solving: A Research Agenda for Idea Finding

    OpenAIRE

    Maiden, N.; Jones, S.; Karlsen, I. K.; Neill, R.; Zachos, K.; Milne, A.

    2010-01-01

    This vision paper frames requirements engineering as a creative problem solving process. Its purpose is to enable requirements researchers and practitioners to recruit relevant theories, models, techniques and tools from creative problem solving to understand and support requirements processes more effectively. It uses 4 drivers to motivate the case for requirements engineering as a creative problem solving process. It then maps established requirements activities onto one of the longest-esta...

  3. Disposal of Radioactive Waste. Specific Safety Requirements (Spanish Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This Safety Requirements publication applies to the disposal of radioactive waste of all types by means of emplacement in designed disposal facilities, subject to the necessary limitations and controls being placed on the disposal of the waste and on the development, operation and closure of facilities. The classification of radioactive waste is discussed. This Safety Requirements publication establishes requirements to provide assurance of the radiation safety of the disposal of radioactive waste, in the operation of a disposal facility and especially after its closure. The fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation. This is achieved by setting requirements on the site selection and evaluation and design of a disposal facility, and on its construction, operation and closure, including organizational and regulatory requirements.

  4. CaMKII effects on inotropic but not lusitropic force frequency responses require phospholamban

    Science.gov (United States)

    Wu, Yiming; Luczak, Elizabeth D; Lee, Eun-Jeong; Hidalgo, Carlos; Yang, Jinying; Gao, Zhan; Li, Jingdong; Wehrens, Xander; Granzier, Henk; Anderson, Mark E

    2014-01-01

    Increasing heart rate enhances cardiac contractility (force frequency relationship, FFR) and accelerates cardiac relaxation (frequency-dependent acceleration of relaxation, FDAR). The positive FFR together with FDAR promotes rapid filling and ejection of blood from the left ventricle (LV) at higher heart rates. Recent studies indicate that the multifunctional Ca2+/calmodulin-dependent protein kinase II (CaMKII) is involved in regulating FFR and FDAR. We used isolated perfused mouse hearts to study the mechanisms of FFR and FDAR in different genetic models, including transgenic myocardial CaMKII inhibition (AC3-I) and phosphalamban knockout (PLN−/−). When the rate was increased from 360 beats/min to 630 beats/min in wild type mouse hearts, the LV developed pressure (LVDP) and the maximum rate of increase in pressure (dP/dt max) increased by 37.6 ± 4.7% and 77.0 ± 8.1%, respectively. However, hearts from AC3-I littermates showed no increase of LVDP and a relatively modest (20.4 ± 3.9 %) increase in dP/dt max. PLN−/− hearts had a negative FFR, and myocardial AC3-I expression did not change the FFR in PLN−/− mice. PLN−/− mouse hearts did not exhibit FDAR, while PLN−/−mice with myocardial AC3-I expression showed further frequency dependent reductions in cardiac relaxation, suggesting CaMKII targets in addition to PLN were critical to myocardial relaxation. We incubated a constitutively active form of CaMKII with chemically-skinned myocardium and found that several myofilament proteins were phosphorylated by CaMKII. However, CaMKII did not affect myofilament calcium sensitivity. Our study shows that CaMKII plays an important role in modulating FFR and FDAR in murine hearts and suggest that PLN is a critical target for CaMKII effects on FFR, while CaMKII effects on FDAR partially require PLN-alternative targets. PMID:22796260

  5. Network and system diagrams revisited: Satisfying CEA requirements for causality analysis

    International Nuclear Information System (INIS)

    Perdicoulis, Anastassios; Piper, Jake

    2008-01-01

    Published guidelines for Cumulative Effects Assessment (CEA) have called for the identification of cause-and-effect relationships, or causality, challenging researchers to identify methods that can possibly meet CEA's specific requirements. Together with an outline of these requirements from CEA key literature, the various definitions of cumulative effects point to the direction of a method for causality analysis that is visually-oriented and qualitative. This article consequently revisits network and system diagrams, resolves their reported shortcomings, and extends their capabilities with causal loop diagramming methodology. The application of the resulting composite causality analysis method to three Environmental Impact Assessment (EIA) case studies appears to satisfy the specific requirements of CEA regarding causality. Three 'moments' are envisaged for the use of the proposed method: during the scoping stage, during the assessment process, and during the stakeholder participation process

  6. Compliance to two city convenience store ordinance requirements.

    Science.gov (United States)

    Chaumont Menéndez, Cammie K; Amandus, Harlan E; Wu, Nan; Hendricks, Scott A

    2016-04-01

    Robbery-related homicides and assaults are the leading cause of death in retail businesses. Robbery reduction approaches focus on compliance to Crime Prevention Through Environmental Design (CPTED) guidelines. We evaluated the level of compliance to CPTED guidelines specified by convenience store safety ordinances effective in 2010 in Dallas and Houston, Texas, USA. Convenience stores were defined as businesses less than 10 000 square feet that sell grocery items. Store managers were interviewed for store ordinance requirements from August to November 2011, in a random sample of 594 (289 in Dallas, 305 in Houston) convenience stores that were open before and after the effective dates of their city's ordinance. Data were collected in 2011 and analysed in 2012-2014. Overall, 9% of stores were in full compliance, although 79% reported being registered with the police departments as compliant. Compliance was consistently significantly higher in Dallas than in Houston for many requirements and by store type. Compliance was lower among single owner-operator stores compared with corporate/franchise stores. Compliance to individual requirements was lowest for signage and visibility. Full compliance to the required safety measures is consistent with industry 'best practices' and evidence-based workplace violence prevention research findings. In Houston and Dallas compliance was higher for some CPTED requirements but not the less costly approaches that are also the more straightforward to adopt. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  7. Capturing Requirements for Autonomous Spacecraft with Autonomy Requirements Engineering

    Science.gov (United States)

    Vassev, Emil; Hinchey, Mike

    2014-08-01

    The Autonomy Requirements Engineering (ARE) approach has been developed by Lero - the Irish Software Engineering Research Center within the mandate of a joint project with ESA, the European Space Agency. The approach is intended to help engineers develop missions for unmanned exploration, often with limited or no human control. Such robotics space missions rely on the most recent advances in automation and robotic technologies where autonomy and autonomic computing principles drive the design and implementation of unmanned spacecraft [1]. To tackle the integration and promotion of autonomy in software-intensive systems, ARE combines generic autonomy requirements (GAR) with goal-oriented requirements engineering (GORE). Using this approach, software engineers can determine what autonomic features to develop for a particular system (e.g., a space mission) as well as what artifacts that process might generate (e.g., goals models, requirements specification, etc.). The inputs required by this approach are the mission goals and the domain-specific GAR reflecting specifics of the mission class (e.g., interplanetary missions).

  8. Pharmaceutical strategic purchasing requirements in Iran: Price interventions and the related effective factors

    Science.gov (United States)

    Bastani, Peivand; Dinarvand, Rasoul; SamadBeik, Mahnaz; Pourmohammadi, Kimia

    2016-01-01

    Objective: Pharmaceutical access for the poor is an essential factor in developing countries that can be improved through strategic purchasing. This study was conducted to identify the elements affecting price in order to enable insurance organizations to put strategic purchasing into practice. Methods: This was a qualitative study conducted through content analysis with an inductive approach applying a five-stage framework analysis (familiarization, identifying a thematic framework, indexing, mapping, and interpretation). Data analysis was started right after transcribing each interview applying ATLAS.ti. Data were saturated after 32 semi-structured interviews by experts. These key informants were selected purposefully and through snowball sampling. Findings: Findings showed that there are four main themes as Pharmaceutical Strategic Purchasing Requirements in Iran as follows essential and structural factors, international factors, economical factors, and legal factors. Moreover, totally 14 related sub-themes were extracted in this area as the main effective variables. Conclusion: It seems that paying adequate attention to the four present themes and 14 sub-themes affecting price can enable health system policy-makers of developing countries like Iran to make the best decisions through strategic purchasing of drugs by the main insurers in order to improve access and health in the country. PMID:26985434

  9. The number of patients and events required to limit the risk of overestimation of intervention effects in meta-analysis--a simulation study

    DEFF Research Database (Denmark)

    Thorlund, Kristian; Imberger, Georgina; Walsh, Michael

    2011-01-01

    Meta-analyses including a limited number of patients and events are prone to yield overestimated intervention effect estimates. While many assume bias is the cause of overestimation, theoretical considerations suggest that random error may be an equal or more frequent cause. The independent impact...... of random error on meta-analyzed intervention effects has not previously been explored. It has been suggested that surpassing the optimal information size (i.e., the required meta-analysis sample size) provides sufficient protection against overestimation due to random error, but this claim has not yet been...

  10. Swedish contribution to the greenhouse effect and required reductions to meet the 550 ppmv target

    International Nuclear Information System (INIS)

    Lindell, Lina; Nilsson, Kristina

    2002-11-01

    According to the Swedish Parliament, the Swedish international climate strategy should focus on a stabilisation of the concentration of greenhouse gases in the atmosphere. An equilibrium concentration lower than 550 ppmv CO 2 -equivalents should be achieved by the end of this century. As an interim target, the yearly emissions should not exceed 4.5 tonnes CO 2 -equivalents per capita by 2050. In this study an inventory of Swedish emissions from 1834 until 2000, for the six greenhouse gases regulated by the Kyoto Protocol, is carried out. Future emission scenarios for carbon dioxide during the time period 2000-2050 are also defined. This data is used for estimating the contribution to the greenhouse effect both today and in the future. Further it is investigated if the 2050-target is sufficient for not exceeding an atmospheric concentration of 550 ppmv. The required reduction for 2100 to reach an equilibrium concentration below this level is also estimated. The Swedish contribution to the greenhouse effect today is about 30 % larger than it should be according to the fairness factor used in this study. The Swedish emission target set for 2050 is sufficient for not exceeding 550 ppmv by that year. However, to reach a stabilisation of the concentration below this level the emissions have to be reduced to 1.0-1.5 tonnes CO 2 -equivalents per capita by 2100

  11. Swedish contribution to the greenhouse effect and required reductions to meet the 550 ppmv target

    Energy Technology Data Exchange (ETDEWEB)

    Lindell, Lina; Nilsson, Kristina [Uppsala Univ. (Sweden). School of Engineering

    2002-11-01

    According to the Swedish Parliament, the Swedish international climate strategy should focus on a stabilisation of the concentration of greenhouse gases in the atmosphere. An equilibrium concentration lower than 550 ppmv CO{sub 2}-equivalents should be achieved by the end of this century. As an interim target, the yearly emissions should not exceed 4.5 tonnes CO{sub 2}-equivalents per capita by 2050. In this study an inventory of Swedish emissions from 1834 until 2000, for the six greenhouse gases regulated by the Kyoto Protocol, is carried out. Future emission scenarios for carbon dioxide during the time period 2000-2050 are also defined. This data is used for estimating the contribution to the greenhouse effect both today and in the future. Further it is investigated if the 2050-target is sufficient for not exceeding an atmospheric concentration of 550 ppmv. The required reduction for 2100 to reach an equilibrium concentration below this level is also estimated. The Swedish contribution to the greenhouse effect today is about 30 % larger than it should be according to the fairness factor used in this study. The Swedish emission target set for 2050 is sufficient for not exceeding 550 ppmv by that year. However, to reach a stabilisation of the concentration below this level the emissions have to be reduced to 1.0-1.5 tonnes CO{sub 2}-equivalents per capita by 2100.

  12. Effect of Bed Temperature on the Laser Energy Required to Sinter Copper Nanoparticles

    Science.gov (United States)

    Roy, N. K.; Dibua, O. G.; Cullinan, M. A.

    2018-03-01

    Copper nanoparticles (NPs), due to their high electrical conductivity, low cost, and easy availability, provide an excellent alternative to other metal NPs such as gold, silver, and aluminum in applications ranging from direct printing of conductive patterns on metal and flexible substrates for printed electronics applications to making three-dimensional freeform structures for interconnect fabrication for chip-packaging applications. Lack of research on identification of optimum sintering parameters such as fluence/irradiance requirements for sintering of Cu NPs serves as the primary motivation for this study. This article focuses on the identification of a good sintering irradiance window for Cu NPs on an aluminum substrate using a continuous wave (CW) laser. The study also includes the comparison of CW laser sintering irradiance windows obtained with substrates at different initial temperatures. The irradiance requirements for sintering of Cu NPs with the substrate at 150-200°C were found to be 5-17 times smaller than the irradiance requirements for sintering with the substrate at room temperature. These findings were also compared against the results obtained with a nanosecond (ns) laser and a femtosecond (fs) laser.

  13. A Framework for Systematic Refinement of Trustworthiness Requirements

    Directory of Open Access Journals (Sweden)

    Nazila Gol Mohammadi

    2017-04-01

    Full Text Available The trustworthiness of systems that support complex collaborative business processes is an emergent property. In order to address users’ trust concerns, trustworthiness requirements of software systems must be elicited and satisfied. The aim of this paper is to address the gap that exists between end-users’ trust concerns and the lack of implementation of proper trustworthiness requirements. New technologies like cloud computing bring new capabilities for hosting and offering complex collaborative business operations. However, these advances might bring undesirable side effects, e.g., introducing new vulnerabilities and threats caused by collaboration and data exchange over the Internet. Hence, users become more concerned about trust. Trust is subjective; trustworthiness requirements for addressing trust concerns are difficult to elicit, especially if there are different parties involved in the business process. We propose a user-centered trustworthiness requirement analysis and modeling framework. We integrate the subjective trust concerns into goal models and embed them into business process models as objective trustworthiness requirements. Business process model and notation is extended to enable modeling trustworthiness requirements. This paper focuses on the challenges of elicitation, refinement and modeling trustworthiness requirements. An application example from the healthcare domain is used to demonstrate our approach.

  14. Tool-based requirement traceability between requirement and design artifacts

    CERN Document Server

    Turban, Bernhard

    2013-01-01

    Processes for developing safety-critical systems impose special demands on ensuring requirements traceability. Achieving valuable traceability information, however, is especially difficult concerning the transition from requirements to design. Bernhard Turban analyzes systems and software engineering theories cross-cutting the issue (embedded systems development, systems engineering, software engineering, requirements engineering and management, design theory and processes for safety-critical systems). As a solution, the author proposes a new tool approach to support designers in their thinkin

  15. Effect of tranexamic acid on intraoperative blood loss and transfusion requirements in patients undergoing excision of intracranial meningioma.

    Science.gov (United States)

    Hooda, Bhavna; Chouhan, Rajendra Singh; Rath, Girija Prasad; Bithal, Parmod Kumar; Suri, Ashish; Lamsal, Ritesh

    2017-07-01

    Surgical excision of meningioma is often complicated by significant blood loss requiring blood transfusion with its attendant risks. Although tranexamic acid is used to reduce perioperative blood loss, its blood conservation effect is uncertain in neurosurgery. Sixty adults undergoing elective craniotomy for meningioma excision were randomized to receive either tranexamic acid or placebo, initiated prior to skin incision. Patients in the tranexamic acid group received intravenous bolus of 20mg/kg over 20min followed by an infusion of 1mg/kg/h till the conclusion of surgery. Intraoperative blood loss, transfusion requirements and estimation of surgical hemostasis using a 5-grade scale were noted. Postoperatively, the extent of tumor excision on CT scan and complications were observed. Demographics, tumor characteristics, amount of fluid infusion, and duration of surgery and anesthesia were comparable between the two groups. The amount of blood loss was significantly less in tranexamic acid group compared to placebo (830mlvs 1124ml; p=0.03). The transfusion requirement was less in tranexamic acid group (p>0.05). The patients in tranexamic acid group fared better on a 5-grade surgical hemostasis scale with more patients showing good hemostasis (p=0.007). There were no significant differences between the groups with regards to extent of tumor removal, perioperative complications, hospital stay or neurologic outcome. To conclude, administration of tranexamic acid significantly reduced blood loss in patients undergoing excision of meningioma. Fewer patients in the tranexamic acid group received blood transfusions. Surgical field hemostasis was better achieved in patients who received tranexamic acid. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Effect of increased regulation on capital costs and manual labor requirements of nuclear power plants

    International Nuclear Information System (INIS)

    Paik, S.; Schriver, W.R.

    1981-01-01

    An attempt is made to explain the impact of increasing governmental regulation on capital costs and labor requirements for constructing light water reactor (LWR) electric power plants. The principal factors contributing to these increases are: (1) market conditions and (2) increased regulation. General market conditions include additional costs attributable to price inflation of equipment, material, labor, and the increased cost of money. The central objective of this work is to estimate the impact of increasing regulation on plant costs and, conversely, on output. To do this it is necessary to isolate two opposing sets of forces which have been in operation during the period of major regulatory expansion: learning based upon plant design experience and economies of scale with increasing size (generating capacity) of newer plants. Conceptual models are specified to capture the independent effects of increasing regulation, learning, and economies of scale. Empirical results were obtained by estimating the models on data collected from industry experience during the 1967-1980 period. 23 refs

  17. 13 CFR 107.150 - Management-ownership diversity requirement.

    Science.gov (United States)

    2010-01-01

    ... minimum numerical listing standards and the corporate governance listing standards of the New York Stock... requirement as in effect at the time it was first applicable to you or you may satisfy the management...

  18. Solar cell development requires effective metrology: lock-in thermography can help

    International Nuclear Information System (INIS)

    Tarin, M.; Overstreet, R.

    2013-01-01

    The environmental and political benefits of renewable energy sources are understood by any informed observer with an interest in the future sustainability of our planet. Solar cells are getting a lot of attention - not only because they are a clean source of renewable energy, but also because their energy input is essentially free. Through the use of photovoltaic (PV) technology, solar cells convert the sun's rays directly into electricity. According to John Boyd, a technology analyst at Semiconductor Insights, 'a solar array 150 x 150 km could, in principle, meet all of North America's energy needs.' Assuming adequate installation space, and a solution for power grid load balancing, the main problem remaining to be solved is achieving grid parity - the point at which the cost of generating PV power is competitive with that of generating power using existing power plants. Currently, the cost of generating PV power is approximately $0.20/kWh globally. This is still roughly twice the rate of coal-based alternatives. The current generation of silicon solar cells typically achieves conversion efficiencies between 15% and 25%, while typical metallic thin film cells have efficiencies in the 5% to 20% range, depending on materials used. R and D efforts are aimed at increasing the efficiency of both solar cell technologies and reducing PV cell power generation costs to around $0.05/kWh. The primary challenges in reducing the cost of PV power generation exist in the production phase of the development cycle. Too many defects in the semiconducting material structure go undetected before solar cells are put into use. Identifying these defects requires efficient, cost effective test and measurement methods for characterizing a cell's performance and its electronic structure.(author)

  19. Systematic analysis of aircraft separation requirements

    Science.gov (United States)

    Ennis, Rachelle Lea

    2005-12-01

    Minimum separation standards are necessary for safety in the air traffic control system. At the same time, minimum separation standards constrain the flow of air traffic and cause delays that translate to millions of dollars in fuel costs. Two necessary separation standards are defined. Then, practical methods for calculating the minimum required size of these separation standards are presented. First, the protected zone is considered. The protected zone represents a region around a given aircraft that no other aircraft should penetrate for the safety of both aircraft. It defines minimum separation requirements. Three major components of the protected zone and their interplays are identified: a vortex region, a safety buffer region, and a state-uncertainty region. A systematic procedure is devised for the analysis of the state-uncertainty region. In particular, models of trajectory controls are developed that can be used to represent different modes of pilot and/or autopilot controls, such as path feedback and non-path feedback. Composite protected zones under various conditions are estimated, and effective ways to reduce sizes of protected zones for advanced air traffic management are examined. In order to maintain minimum separation standards between two aircraft, proper avoidance maneuvers must be initiated before their relative separation reaches the minimum separation due to aircraft dynamics, controller and pilot response delays, etc. The concept of the required action threshold is presented. It is defined as the advanced time for which the conflict resolution process must begin in order to maintain minimum separation requirements. Five main segments in the process of conflict resolution are identified, discussed, and modeled: state information acquisition, comprehension and decision, communication, pilot response, and aircraft maneuver. Each of the five segments is modeled via a time constant. Time estimates for the first four segments are obtained from

  20. Contribution of Legume Rotations to the Nitrogen Requirements of a ...

    African Journals Online (AJOL)

    Cereal crop yield improvements following legume rotations ... effects of legumes rotation in meeting the N fertilizer requirements of maize. ... The effects of the rotations on increasing the maize yields were equivalent to application of 25, 19 and.

  1. Updated requirements for control room annunciation: an operations perspective

    International Nuclear Information System (INIS)

    Davey, E.; Lane, L.

    2001-01-01

    The purpose of this paper is to describe the results of updating and aligning requirements for annunciation functionality and performance with current expectations for operational excellence. This redefinition of annunciation requirements was undertaken as one component of a project to characterize improvement priorities, establish the operational and economic basis for improvement, and identify preferred implementation options for Ontario Power Generation plants. The updated requirements express the kinds of information support annunciation should provide to Operations staff to support the detection, recognition and response to changes in plant conditions. The updated requirements were developed using several types of information: management and industry expectations for operations excellence, previous definitions of user needs for annunciation, and operational and ergonomic principles. Operations and engineering staff at several stations have helped refine and complete the initial requirements definition. Application of these updated requirements is expected to lead to more effective and task relevant annunciation system improvements that better serve plant operation needs. The paper outlines the project rationale, reviews development objectives, discusses the approaches applied for requirements definition and organization, describes key requirements findings in relation to current operations experience, and discusses the proposed application of these requirements for guiding future annunciation system improvements. (author)

  2. A performance requirements analysis of the SSC control system

    International Nuclear Information System (INIS)

    Hunt, S.M.; Low, K.

    1992-01-01

    This paper presents the results of analysis of the performance requirements of the Superconducting Super Collider Control System. We quantify the performance requirements of the system in terms of response time, throughput and reliability. We then examine the effect of distance and traffic patterns on control system performance and examine how these factors influence the implementation of the control network architecture and compare the proposed system against those criteria. (author)

  3. Required doses for projection methods in X-ray diagnosis

    International Nuclear Information System (INIS)

    Hagemann, G.

    1992-01-01

    The ideal dose requirement has been stated by Cohen et al. (1981) by a formula basing on parallel beam, maximum quantum yield and Bucky grid effect depending on the signal to noise ratio and object contrast. This was checked by means of contrast detail diagrams measured at the hole phantom, and was additionally compared with measurement results obtained with acrylic glass phantoms. The optimal dose requirement is obtained by the maximum technically possible approach to the ideal requirement level. Examples are given, besides for x-ray equipment with Gd 2 O 2 S screen film systems for grid screen mammography, and new thoracic examination systems for mass screenings. Finally, a few values concerning the dose requirement or the analogous time required for fluorscent screening in angiography and interventional radiology, are stated, as well as for dentistry and paediatric x-ray diagnostics. (orig./HP) [de

  4. Safety of nuclear power plants: Design. Safety requirements

    International Nuclear Information System (INIS)

    2000-01-01

    The present publication supersedes the Code on the Safety of Nuclear Power Plants: Design (Safety Series No. 50-C-D (Rev. 1), issued in 1988). It takes account of developments relating to the safety of nuclear power plants since the Code on Design was last revised. These developments include the issuing of the Safety Fundamentals publication, The Safety of Nuclear Installations, and the present revision of various safety standards and other publications relating to safety. Requirements for nuclear safety are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear power plants. It is recognized that technology and scientific knowledge advance, and nuclear safety and what is considered adequate protection are not static entities. Safety requirements change with these developments and this publication reflects the present consensus. This Safety Requirements publication takes account of the developments in safety requirements by, for example, including the consideration of severe accidents in the design process. Other topics that have been given more detailed attention include management of safety, design management, plant ageing and wearing out effects, computer based safety systems, external and internal hazards, human factors, feedback of operational experience, and safety assessment and verification. This publication establishes safety requirements that define the elements necessary to ensure nuclear safety. These requirements are applicable to safety functions and the associated structures, systems and components, as well as to procedures important to safety in nuclear power plants. It is expected that this publication will be used primarily for land based stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat production applications (such as district heating or desalination). It is recognized that in the case of

  5. Safety of nuclear power plants: Design. Safety requirements

    International Nuclear Information System (INIS)

    2004-01-01

    The present publication supersedes the Code on the Safety of Nuclear Power Plants: Design (Safety Series No. 50-C-D (Rev. 1), issued in 1988). It takes account of developments relating to the safety of nuclear power plants since the Code on Design was last revised. These developments include the issuing of the Safety Fundamentals publication, The Safety of Nuclear Installations, and the present revision of various safety standards and other publications relating to safety. Requirements for nuclear safety are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear power plants. It is recognized that technology and scientific knowledge advance, and nuclear safety and what is considered adequate protection are not static entities. Safety requirements change with these developments and this publication reflects the present consensus. This Safety Requirements publication takes account of the developments in safety requirements by, for example, including the consideration of severe accidents in the design process. Other topics that have been given more detailed attention include management of safety, design management, plant ageing and wearing out effects, computer based safety systems, external and internal hazards, human factors, feedback of operational experience, and safety assessment and verification. This publication establishes safety requirements that define the elements necessary to ensure nuclear safety. These requirements are applicable to safety functions and the associated structures, systems and components, as well as to procedures important to safety in nuclear power plants. It is expected that this publication will be used primarily for land based stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat production applications (such as district heating or desalination). It is recognized that in the case of

  6. Direct and indirect effects of nutritional status, physical function and cognitive function on activities of daily living in Japanese older adults requiring long-term care.

    Science.gov (United States)

    Kamo, Tomohiko; Nishida, Yuusuke

    2014-10-01

    To identify the direct and indirect effects of nutritional status, physical function, and cognitive function on activities of daily living in Japanese older adults requiring long-term care. In total, 179 participants aged ≥ 65 years who were eligible for long-term care insurance (mean age 85.5 ± 7.8 years) were recruited for this study. Nutritional status (Mini Nutritional Assessment, Short Form) and physical function (Short Physical Performance Battery) were examined. Activities of daily living, cognitive function and frailty were assessed using the Barthel Index, Mini-Mental State Examination and Clinical Frailty Scale, respectively. Path analysis was used to determine relationships between these factors and the activities of daily living. For Japanese older adults requiring long-term care, pathways were modeled for nutritional status, physical function and the activities of daily living. The total effect of nutritional status was 0.516 (Pphysical function on the activities of daily living was 0.458 (Pphysical function in aged Japanese people requiring long-term care. These findings suggest that maintaining good nutritional status and nutritional support might delay physical function decline, and prolong the activities of daily living. © 2013 Japan Geriatrics Society.

  7. Molten Salt Fuel Cycle Requirements for ADTT Applications

    International Nuclear Information System (INIS)

    Del Cul, G.D.; Toth, L.M.; Williams, D.F.

    1999-01-01

    The operation of an ADT system with the associated nuclear reactions has a profound effect upon the chemistry of the fuel - especially with regards to container compatibility and the chemical separations that may be required. The container can be protected by maintaining the redox chemistry within a relatively narrow, non-corrosive window. Neutron economy as well as other factors require a sophisticated regime of fission product separations. Neither of these control requirements has been demonstrated on the scale or degree of sophistication necessary to support an ADT device. We review the present situation with respect to fluoride salts, and focus on the critical issues in these areas which must be addressed. One requirement for advancement in this area - a supply of suitable materials - will soon be fulfilled by the remediation of ORNLs Molten Salt Reactor Experiment, and the removal of a total of 11,000 kg of enriched (Li-7 > 99.9%) coolant, flush, and fuel salts

  8. 15 CFR 296.5 - Eligibility requirements for companies and joint ventures.

    Science.gov (United States)

    2010-01-01

    ... those afforded to any other company; and affords adequate and effective protection for the intellectual... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Eligibility requirements for companies... EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.5 Eligibility requirements for companies and...

  9. The Design of Effective ICT-Supported Learning Activities: Exemplary Models, Changing Requirements, and New Possibilities

    Directory of Open Access Journals (Sweden)

    Cameron Richards

    2005-01-01

    Full Text Available Despite the imperatives of policy and rhetoric about their integration in formal education, Information and Communication Technologies (ICTs are often used as an "add-on" in many classrooms and in many lesson plans. Nevertheless, many teachers find that interesting and well-planned tasks, projects, and resources provide a key to harnessing the educational potential of digital resources, Internet communications and interactive multimedia to engage the interest, interaction, and knowledge construction of young learners. To the extent that such approaches go beyond and transform traditional "transmission" models of teaching and formal lesson planning, this paper investigates the changing requirements and new possibilities represented by the challenge of integrating ICTs in education in a way which at the same time connects more effectively with both the specific contents of the curriculum and the various stages and elements of the learning process. Case studies from teacher education foundation courses provide an exemplary focus of inquiry in order to better link relevant new theories or models of learning with practice, to build upon related learner-centered strategies for integrating ICT resources and tools, and to incorporate interdependent functions of learning as information access, communication, and applied interactions. As one possible strategy in this direction, the concept of an "ICT-supported learning activity" suggests the need for teachers to approach this increasing challenge more as "designers" of effective and integrated learning rather than mere "transmitters" of skills or information through an add-on use of ICTs.

  10. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover; DOE responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements; records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor for use during Phase 1B

  11. Assessment of tritium breeding requirements for fusion power reactors

    International Nuclear Information System (INIS)

    Jung, J.

    1983-12-01

    This report presents an assessment of tritium-breeding requirements for fusion power reactors. The analysis is based on an evaluation of time-dependent tritium inventories in the reactor system. The method presented can be applied to any fusion systems in operation on a steady-state mode as well as on a pulsed mode. As an example, the UWMAK-I design was analyzed and it has been found that the startup inventory requirement calculated by the present method significantly differs from those previously calculated. The effect of reactor-parameter changes on the required tritium breeding ratio is also analyzed for a variety of reactor operation scenarios

  12. Precision requirements for space-based X(CO2) data

    International Nuclear Information System (INIS)

    Miller, C.E.; Crisp, D.; Miller, C.E.; Salawitch, J.; Sander, S.P.; Sen, B.; Toon, C.; DeCola, P.L.; Olsen, S.C.; Randerson, J.T.; Michalak, A.M.; Alkhaled, A.; Michalak, A.M.; Rayner, P.; Jacob, D.J.; Suntharalingam, P.; Wofsy, S.C.; Jacob, D.J.; Suntharalingam, P.; Wofsy, S.C.; Jones, D.B.A.; Denning, A.S.; Nicholls, M.E.; O'Brien, D.; Doney, S.C.; Pawson, S.; Pawson, S.; Connor, B.J.; Fung, I.Y.; Tans, P.; Wennberg, P.O.; Yung, Y.L.; Law, R.M.

    2007-01-01

    Precision requirements are determined for space-based column-averaged CO 2 dry air mole fraction X(CO 2 ) data. These requirements result from an assessment of spatial and temporal gradients in X(CO 2 ), the relationship between X(CO 2 ) precision and surface CO 2 flux uncertainties inferred from inversions of the X(CO 2 ) data, and the effects of X(CO 2 ) biases on the fidelity of CO 2 flux inversions. Observational system simulation experiments and synthesis inversion modeling demonstrate that the Orbiting Carbon Observatory mission design and sampling strategy provide the means to achieve these X(CO 2 ) data precision requirements. (authors)

  13. The IAEA inspectorate, including new requirements

    International Nuclear Information System (INIS)

    Alston, W.

    1998-01-01

    The basic purpose of the IAEA safeguards system is 'timely detection of diversion of significant quantities of nuclear material'. Safeguards implementation is regulated by the IAEA Statute and individual safeguards agreements. The IAEA Inspectorate and its scope are described together with the technical objectives and the concept of verification. Effective implementation of safeguards requires cooperation between the IAEA and the state concerned. To this end, agreements require that the State should establish and maintain a system of accounting for and control of nuclear material subject to safeguards. The IAEA safeguards system has demonstrated a flexibility capable of responding to the verification demands of Member States. Is is capable of safeguarding nuclear materials, facilities, equipment and non-nuclear material. The IAEA is in the process of strengthening safeguards in its verification of declared activities

  14. The IAEA inspectorate, including new requirements

    Energy Technology Data Exchange (ETDEWEB)

    Alston, W [International Atomic Energy Agency, Department of Safeguards, Division of Operations A, Vienna (Austria)

    1999-12-31

    The basic purpose of the IAEA safeguards system is `timely detection of diversion of significant quantities of nuclear material`. Safeguards implementation is regulated by the IAEA Statute and individual safeguards agreements. The IAEA Inspectorate and its scope are described together with the technical objectives and the concept of verification. Effective implementation of safeguards requires cooperation between the IAEA and the state concerned. To this end, agreements require that the State should establish and maintain a system of accounting for and control of nuclear material subject to safeguards. The IAEA safeguards system has demonstrated a flexibility capable of responding to the verification demands of Member States. Is is capable of safeguarding nuclear materials, facilities, equipment and non-nuclear material. The IAEA is in the process of strengthening safeguards in its verification of declared activities

  15. Evolution of Requirements and Assumptions for Future Exploration Missions

    Science.gov (United States)

    Anderson, Molly; Sargusingh, Miriam; Perry, Jay

    2017-01-01

    NASA programs are maturing technologies, systems, and architectures to enabling future exploration missions. To increase fidelity as technologies mature, developers must make assumptions that represent the requirements of a future program. Multiple efforts have begun to define these requirements, including team internal assumptions, planning system integration for early demonstrations, and discussions between international partners planning future collaborations. For many detailed life support system requirements, existing NASA documents set limits of acceptable values, but a future vehicle may be constrained in other ways, and select a limited range of conditions. Other requirements are effectively set by interfaces or operations, and may be different for the same technology depending on whether the hard-ware is a demonstration system on the International Space Station, or a critical component of a future vehicle. This paper highlights key assumptions representing potential life support requirements and explanations of the driving scenarios, constraints, or other issues that drive them.

  16. The Danish CSR Reporting Requirement as Reflexive Law

    DEFF Research Database (Denmark)

    Buhmann, Karin

    2013-01-01

    With effect for financial years beginning January 2009 or later, the Danish Financial Statements Act and related governmental regulations require large Danish companies and institutional investors to submit an annual Corporate Social Responsibility (CSR) report. Through application of reflexive law...

  17. Effects of physical properties of powder particles on binder liquid requirement and agglomerate growth mechanisms in a high shear mixer.

    Science.gov (United States)

    Johansen, A; Schaefer, T

    2001-09-01

    A study was performed in order to elucidate the effects of the physical properties of small powder particles on binder liquid requirement and agglomerate growth mechanisms. Three grades of calcium carbonate having different particle size distribution, surface area, and particle shape but approximately the same median particle size (4-5 microm), were melt agglomerated with polyethylene glycol (PEG) 3000 or 20,000 in an 8-l high shear mixer at three impeller speeds. The binder liquid requirement was found to be very dependent on the packing properties of the powder, a denser packing resulting in a lower binder liquid requirement. The densification of the agglomerates in the high shear mixer could be approximately predicted by compressing a powder sample in a compaction simulator. With the PEG having the highest viscosity (PEG 20,000), the agglomerate formation and growth occurred primarily by the immersion mechanism, whereas PEG 3000 gave rise to agglomerate growth by coalescence. Powder particles with a rounded shape and a narrow size distribution resulted in breakage of agglomerates with PEG 3000, whereas no breakage was seen with PEG 20,000. Powder particles having an irregular shape and surface structure could be agglomerated with PEG 20,000, whereas agglomerate growth became uncontrollable with PEG 3000. When PEG 20,000 was added as a powder instead of flakes, the resultant agglomerates became rounder and the size distribution narrower.

  18. Effects of climate change on the length of growth stages and water requirement of wheat and barley (Case Study: Birjand Plain

    Directory of Open Access Journals (Sweden)

    Mitra Rahmani

    2016-03-01

    Full Text Available Introduction The global climate is changing and, despite efforts to reduce greenhouse gas emissions, weather variation is inevitable. Meanwhile, agriculture as a major water consumer will require adaptation to these variations, along with other challenges, to guarantee its persistence and sustainability. Given the arid and semi-arid climate of Iran, water, as a main limiting factor for agricultural production, plays an important role in determining the type of farming activities (Osamu et al., 2005. Crop water requirements and evapotranspiration are the main cause of water consumption in agricultural sector, the both accepted to face a dramatic increase in future under influence of increasing temperatures resulting from climate change (Koocheki et al., 2001. In this regard, the foreknowledge about future changes in climate and its effects on agricultural water use can be helpful for farmers and decision-makers. This study aimed to evaluate the climatic conditions of Birjand plain in the next two decades, and to investigate the effects of climate change on water consumption of wheat and barley as two main crops in this region. Materials and methods In the present survey, the effects of estimated climate change in Birjand plain on water requirement of wheat and barley and wheat yield in the 2010-2039 period were studied. Based on average weather data for the last thirty years from Birjand synoptic stations, climatic parameters of temperature and precipitation for the time period of 2010-2039 were simulated with LARS-WG5 using A1 scenario confirmed by the IPCC. Wind speed and relative humidity also were estimated for the future period. Common planting and harvesting dates were obtained from local farmers and Birjand Agriculture Organization and duration and crop coefficients (Kc for early, developmental, middle and final crop growth stages in the current period were extracted from FAO Irrigation and Drainage Paper No. 56. For the future period

  19. Risk based maintenance: Resource requirements and organizational challenges

    International Nuclear Information System (INIS)

    Weerakkody, S.D.

    2000-01-01

    10CFR50.65 'Requirements for Monitoring the Effectiveness of Maintenance at Nuclear Power Plants' required licensees to monitor the performance or condition of structures, systems, or components (SSCs) against licensee established goals, in a manner sufficient to provide reasonable assurance that such SSCs are capable of fulfilling their intended functions. The goals were required to be commensurate with safety significance and operating experience. Northeast Utilities relied upon PRAs to implement 10CFR50.65, which is also referred to as the 'Maintenance Rule'. The Maintenance Rule changed some aspects of maintenance of structures, systems, and components (SSC) at nuclear power plants. One objective of the rule was to focus the maintenance resources based on risk significance of components. This paper will discuss the organizational challenges and resource requirements associated with implementation of the Maintenance Rule at nuclear facilities that are supported by the Northeast Utilities Services Company (NUSCo). The paper will discuss (a) how these challenges were addressed, (b) the resources required for ongoing efforts to support the Maintenance Rule, and (c) several key safety benefits derived from the implementation of the Maintenance Rule. (author)

  20. Operation and maintenance requirements of system design bases

    International Nuclear Information System (INIS)

    Banerjee, A.K.; Hanley, N.E.

    1989-01-01

    All system designs make assumptions about system operation testing, inspection, and maintenance. Existing industry codes and standards explicitly address design requirements of new systems, while issues related to system and plant reliability, life, design margins, effects of service conditions, operation, maintenance, etc., usually are implicit. However, system/component design documents of existing power plants often address the code requirements without considering the operation, maintenance, inspection, and testing (OMIT) requirements. The nuclear industry is expending major efforts at most nuclear power plants to reassemble and/or reconstitute system design bases. Stone ampersand Webster Engineering Corporation (SWEC) recently addressed the OMIT requirements of system/component design as an integral part of a utility's preventive maintenance program. For each component, SWEC reviewed vendor recommendations, NPRDS data/industry experience, the existing maintenance program, component service conditions, and actual plant experience. A maintenance program that considers component service conditions and plant experience ensures a connection between maintenance and design basis. Root cause analysis of failure and engineering evaluation of service condition are part of the program. System/component OMIT requirements also are compared against system design, service condition, degradation mechanism, etc., through system/component life-cycle evaluation

  1. Requiring students to have computers: questions for consideration.

    Science.gov (United States)

    McAuley, R J

    1998-06-01

    For the past several years a dialogue has been taking place in the offices, lounges, and meeting rooms of medical schools about whether medical students should be required to bring or purchase computers when they enter school. Microcomputers offer educators a unique opportunity to provide students with access to computer-assisted instruction, asynchronous communication, and extensive knowledge bases. However, there is still no evidence attesting to the effectiveness of computers as teaching or learning tools in medical education. The author raises questions that schools need to consider before requiring students to own computers: What kind of computer best suits their needs? What might impede using computers to teach? And who is currently requiring computers? In addressing the last question, the author presents information about 15 North American schools that currently require their students to have computers, reporting each school's software and hardware requirements; how each expects students to use the computers; and who covers the cost of the computers (the students or the school). Finally, he argues that major institutional commitment is needed for computers to be successfully integrated into any medical school curriculum.

  2. Change Factors requiring agility and implications for IT

    NARCIS (Netherlands)

    van Oosterhout, Marcel; Waarts, Eric; van Hillegersberg, Jos

    2006-01-01

    The current highly dynamic business environment requires businesses to be agile. Business agility is the ability to swiftly and easily change businesses and business processes beyond the normal level of flexibility to effectively manage unpredictable external and internal changes. This study reports

  3. 17 CFR 230.481 - Information required in prospectuses.

    Science.gov (United States)

    2010-04-01

    ... GENERAL RULES AND REGULATIONS, SECURITIES ACT OF 1933 Investment Companies; Business Development Companies... Delivery Obligation Until (insert date), all dealers that effect transactions in these securities, whether... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Information required in...

  4. Wireless Technology Use Case Requirement Analysis for Future Space Applications

    Science.gov (United States)

    Abedi, Ali; Wilkerson, DeLisa

    2016-01-01

    This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

  5. The effect of maropitant on intraoperative isoflurane requirements and postoperative nausea and vomiting in dogs: a randomized clinical trial.

    Science.gov (United States)

    Swallow, Adam; Rioja, Eva; Elmer, Tim; Dugdale, Alex

    2017-07-01

    To establish if preoperative maropitant significantly reduced intraoperative isoflurane requirements and reduced clinical signs associated with postoperative nausea and vomiting (PONV) in dogs. Randomized clinical trial. Twenty-four healthy, client-owned dogs undergoing routine ovariohysterectomy. Premedication involved acepromazine (0.03 mg kg -1 ) combined with methadone (0.3 mg kg -1 ) intramuscularly 45 minutes before anaesthetic induction with intravenous (IV) propofol, dosed to effect. Meloxicam (0.2 mg kg -1 ) was administered intravenously. Dogs were randomly assigned to administration of saline (group S; 0.1 mL kg -1 , n=12) or maropitant (group M; 1 mg kg -1 , n=12) subcutaneously at time of premedication. Methadone (0.1 mg kg -1 IV) was repeated 4 hours later. Anaesthesia was maintained with isoflurane in oxygen, dosed to effect by an observer unaware of group allocation. The dogs were assessed hourly, starting 1 hour postoperatively, using the short form of the Glasgow Composite Pain Score (GCPS), and for ptyalism and signs attributable to PONV [score from 0 (none) to 3 (severe)] by blinded observers. Owners completed a questionnaire at the postoperative recheck. Overall mean±standard deviation end-tidal isoflurane percentage was lower in group M (1.19±0.26%) than group S (1.44±0.23%) (p=0.022), but was not significantly different between groups at specific noxious events (skin incision, ovarian pedicle clamp application, cervical clamp application, wound closure). Cardiorespiratory variables and postoperative GCPS were not significantly different between groups. Overall, 50% of dogs displayed signs attributable to PONV, with no difference in PONV scores between groups (p=0.198). No difference in anaesthetic recovery was noted by owners between groups. Maropitant reduced overall intraoperative isoflurane requirements but did not affect the incidence of PONV. Maropitant provided no significant benefits to dogs undergoing ovariohysterectomy

  6. A Scenario-Based Process for Requirements Development: Application to Mission Operations Systems

    Science.gov (United States)

    Bindschadler, Duane L.; Boyles, Carole A.

    2008-01-01

    The notion of using operational scenarios as part of requirements development during mission formulation (Phases A & B) is widely accepted as good system engineering practice. In the context of developing a Mission Operations System (MOS), there are numerous practical challenges to translating that notion into the cost-effective development of a useful set of requirements. These challenges can include such issues as a lack of Project-level focus on operations issues, insufficient or improper flowdown of requirements, flowdown of immature or poor-quality requirements from Project level, and MOS resource constraints (personnel expertise and/or dollars). System engineering theory must be translated into a practice that provides enough structure and standards to serve as guidance, but that retains sufficient flexibility to be tailored to the needs and constraints of a particular MOS or Project. We describe a detailed, scenario-based process for requirements development. Identifying a set of attributes for high quality requirements, we show how the portions of the process address many of those attributes. We also find that the basic process steps are robust, and can be effective even in challenging Project environments.

  7. Feed tank transfer requirements

    Energy Technology Data Exchange (ETDEWEB)

    Freeman-Pollard, J.R.

    1998-09-16

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented.

  8. Feed tank transfer requirements

    International Nuclear Information System (INIS)

    Freeman-Pollard, J.R.

    1998-01-01

    This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented

  9. Calculation of the Chilling Requirement for Air Conditioning in the Excavation Roadway

    Directory of Open Access Journals (Sweden)

    Yueping Qin

    2015-10-01

    Full Text Available To effectively improve the climate conditions of the excavation roadway in coal mine, the calculation of the chilling requirement taking air conditioning measures is extremely necessary. The temperature field of the surrounding rock with moving boundary in the excavation roadway was numerically simulated by using finite volume method. The unstable heat transfer coefficient between the surrounding rock and air flow was obtained via the previous calculation. According to the coupling effects of the air flow inside and outside air duct, the differential calculation mathematical model of air flow temperature in the excavation roadway was established. The chilling requirement was calculated with the selfdeveloped computer program for forecasting the required cooling capacity of the excavation roadway. A good air conditioning effect had been observed after applying the calculated results to field trial, which indicated that the prediction method and calculation procedure were reliable.

  10. 22 CFR 146.125 - Effect of other requirements.

    Science.gov (United States)

    2010-04-01

    ..., 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or local law or other...

  11. 28 CFR 54.125 - Effect of other requirements.

    Science.gov (United States)

    2010-07-01

    ... Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or...

  12. 13 CFR 113.125 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  13. 40 CFR 5.125 - Effect of other requirements.

    Science.gov (United States)

    2010-07-01

    ... Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or...

  14. 49 CFR 25.125 - Effect of other requirements.

    Science.gov (United States)

    2010-10-01

    ..., 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or local law or other...

  15. 22 CFR 229.125 - Effect of other requirements.

    Science.gov (United States)

    2010-04-01

    ... Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or...

  16. 31 CFR 28.125 - Effect of other requirements.

    Science.gov (United States)

    2010-07-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  17. 6 CFR 17.125 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  18. 43 CFR 41.125 - Effect of other requirements.

    Science.gov (United States)

    2010-10-01

    ... Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or...

  19. 14 CFR 1253.125 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  20. 45 CFR 618.125 - Effect of other requirements.

    Science.gov (United States)

    2010-10-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  1. 18 CFR 1317.125 - Effect of other requirements.

    Science.gov (United States)

    2010-04-01

    ... Executive Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of...

  2. Effects of a constant rate infusion of detomidine on cardiovascular function, isoflurane requirements and recovery quality in horses.

    Science.gov (United States)

    Schauvliege, Stijn; Marcilla, Miguel Gozalo; Verryken, Kirsten; Duchateau, Luc; Devisscher, Lindsey; Gasthuys, Frank

    2011-11-01

    To examine the influence of a detomidine constant rate infusion (CRI) on cardiovascular function, isoflurane requirements and recovery quality in horses undergoing elective surgery. Prospective, randomized, blinded, clinical trial. Twenty adult healthy horses. After sedation (detomidine, 10 μg kg(-1) intravenously [IV]) and induction of anaesthesia (midazolam 0.06 mg kg(-1) , ketamine 2.2 mg kg(-1) IV), anaesthesia was maintained with isoflurane in oxygen/air (inspiratory oxygen fraction 55%). When indicated, the lungs were mechanically ventilated. Dobutamine was administered when MAPdetomidine (5 μg kg(-1)  hour(-1) ) (D) or saline (S) CRI, with the anaesthetist unaware of the treatment. Monitoring included end-tidal isoflurane concentration, arterial pH, PaCO(2) , PaO(2) , dobutamine administration rate, heart rate (HR), arterial pressure, cardiac index (CI), systemic vascular resistance (SVR), stroke index and oxygen delivery index (ḊO(2) I). For recovery from anaesthesia, all horses received 2.5 μg kg(-1) detomidine IV. Recovery quality and duration were recorded in each horse. For statistical analysis, anova, Pearson chi-square and Wilcoxon rank sum tests were used as relevant. Heart rate (p=0.0176) and ḊO(2) I (p= 0.0084) were lower and SVR higher (p=0.0126) in group D, compared to group S. Heart rate (p=0.0011) and pH (p=0.0187) increased over time. Significant differences in isoflurane requirements were not detected. Recovery quality and duration were comparable between treatments. A detomidine CRI produced cardiovascular effects typical for α(2) -agonists, without affecting isoflurane requirements, recovery duration or recovery quality. © 2011 The Authors. Veterinary Anaesthesia and Analgesia. © 2011 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

  3. Trading Robustness Requirements in Mars Entry Trajectory Design

    Science.gov (United States)

    Lafleur, Jarret M.

    2009-01-01

    One of the most important metrics characterizing an atmospheric entry trajectory in preliminary design is the size of its predicted landing ellipse. Often, requirements for this ellipse are set early in design and significantly influence both the expected scientific return from a particular mission and the cost of development. Requirements typically specify a certain probability level (6-level) for the prescribed ellipse, and frequently this latter requirement is taken at 36. However, searches for the justification of 36 as a robustness requirement suggest it is an empirical rule of thumb borrowed from non-aerospace fields. This paper presents an investigation into the sensitivity of trajectory performance to varying robustness (6-level) requirements. The treatment of robustness as a distinct objective is discussed, and an analysis framework is presented involving the manipulation of design variables to effect trades between performance and robustness objectives. The scenario for which this method is illustrated is the ballistic entry of an MSL-class Mars entry vehicle. Here, the design variable is entry flight path angle, and objectives are parachute deploy altitude performance and error ellipse robustness. Resulting plots show the sensitivities between these objectives and trends in the entry flight path angles required to design to these objectives. Relevance to the trajectory designer is discussed, as are potential steps for further development and use of this type of analysis.

  4. Effects of flooring on required coefficient of friction: Elderly adult vs. middle-aged adult barefoot gait.

    Science.gov (United States)

    Rozin Kleiner, Ana Francisca; Galli, Manuela; Araujo do Carmo, Aline; Barros, Ricardo M L

    2015-09-01

    The aim of this study was to investigate the effect of flooring on barefoot gait according to age and gender. Two groups of healthy subjects were analyzed: the elderly adult group (EA; 10 healthy subjects) and the middle-aged group (MA; 10 healthy subjects). Each participant was asked to walk at his or her preferred speed over two force plates on the following surfaces: 1) homogeneous vinyl (HOV), 2) carpet, 3) heterogeneous vinyl (HTV) and 4) mixed (in which the first half of the pathway was covered by HOV and the second by HTV). Two force plates (Kistler 9286BA) embedded in the data collection room floor measured the ground reaction forces and friction. The required coefficient of friction (RCOF) was analyzed. For the statistical analysis, a linear mixed-effects model for repeated measures was performed. During barefoot gait, there were differences in the RCOF among the flooring types during the heel contact and toe-off phases. Due to better plantar proprioception during barefoot gait, the EA and MA subjects were able to distinguish differences among the flooring types. Moreover, when the EA were compared with the MA subjects, differences could be observed in the RCOF during the toe-off phase, and gender differences in the RCOF could also be observed during the heel contact phase in barefoot gait. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  5. 40 CFR 211.211 - Compliance with labeling requirement.

    Science.gov (United States)

    2010-07-01

    ... ABATEMENT PROGRAMS PRODUCT NOISE LABELING Hearing Protective Devices § 211.211 Compliance with labeling requirement. (a) All hearing protective devices manufactured after the effective date of this regulation, and... comply with the Labeled Values of mean attenuation. (b) A manufacturer must take into account both...

  6. 47 CFR 73.24 - Broadcast facilities; showing required.

    Science.gov (United States)

    2010-10-01

    ... requirements of good engineering practice. (f) That the facilities sought are subject to assignment as... proposed assignment will tend to effect a fair, efficient, and equitable distribution of radio service... corporation or other organization) is of good character and possesses other qualifications sufficient to...

  7. Basic national requirements for safe design, construction and operation

    International Nuclear Information System (INIS)

    Franzen, L.F.

    1980-01-01

    Nuclear power plants have to be save. Vendors and utilities operating such plants, are convinced that their plants meet this requirement. Who, however, is establishing the safety requirements to be met by those manufacturing and operating nuclear power plants. What are the mechanisms to control whether the features provided assure the required safety level. Who controls whether the required and planned safety features are really provided. Who is eventually responsible for assuring safety after commissioning of a nuclear power plant. These fundamental questions being raised in many discussions on safety and environmental protection are dealt with in the following sections: (1) Fundamental safety requirements on nuclear power plants, in which such items as risk, legal bases and licensing procedure are discussed, (2) Surveillance during construction, in which safety analysis report, siting, safety evaluation, document examination, quality assurance, and commissioning testing are dealt with, (3) Operating tests and conditions in which recurrent inspections, environmental protection during operation, investigation of abnormal occurences and backfitting requirements as reviewed, and (4) Safety philosophy and safety policy to conclude this presentation. The German approach to nuclear safety serves as an example for an effective way of assuring safe nuclear power. (orig.)

  8. Markets in real electric networks require reactive prices

    International Nuclear Information System (INIS)

    Hogan, W.W.

    1996-01-01

    Extending earlier seminal work, the author finds that locational spot price differences in an electric network provide the natural measure of the appropriate internodal transport charge. However, the problem of loop flow requires different economic intuition for interpreting the implications of spot pricing. The Direct Current model, which is the usual approximation for estimating spot prices, ignores reactive power effects; this approximation is best when thermal constraints create network congestion. However, when voltage constraints are problematic, the DC Load model is insufficient; a full AC Model is required to determine both real and reactive spot prices. 16 figs., 3 tabs., 22 refs

  9. Effects of aspiration pneumonia on the intensive care requirements and in-hospital mortality of hospitalised patients with acute cerebrovascular disease.

    Science.gov (United States)

    Güngen, Adil Can; Aydemir, Yusuf; Güngen, Belma Dogan; Yazar, Esra Ertan; Yağız, Orhan; Aras, Yeşim Güzey; Gümüş, Hatice; Erkorkmaz, Ünal

    2017-08-01

    In this study, we aimed to evaluate the effects of the development of aspiration pneumonia (AP) on the intensive care unit (ICU) requirements and in-hospital mortality of patients hospitalised in the neurology ward due to an acute cerebrovascular accident (CVA). Five hundred and three patients hospitalised in the neurology ward following an acute CVA were retrospectively analysed. The patients were divided into two groups: those with AP (group 1) and those without AP (group 2). Demographic characteristics and physical and radiological findings, including the localisation, lateralisation and aetiology of the infarction, in addition to ICU requirements and mortality, were evaluated. Aspiration pneumonia was detected in 80 (15.9%) patients during the in-hospital stay. Transfer to the ICU for any reason was required in 37.5% of the patients in group 1 and 4.7% of those in group 2 ( p < 0.001). In-hospital mortality occurred in 7.5% and 1.4% of the patients in group 1 and group 2, respectively ( p = 0.006). The incidence of AP was highest in patients with an infarction of the medial cerebral artery (MCA) ( p < 0.001). The AP was associated with older age ( p < 0.001), hypertension ( p = 0.007), echocardiography findings ( p = 0.032) and the modified Rankin Scale (mRS) score ( p < 0.001). Our findings suggest that the requirement rate for transfer to the ICU and the mortality rate appear to be significantly higher in patients with a diagnosis of AP. Precautions should be taken, starting from the first day of hospitalisation, to decrease the incidence of AP in patients with acute CVA, focusing especially on older patients and those with a severe mRS score.

  10. Molecular requirements for radiation-activated recombination

    International Nuclear Information System (INIS)

    Stevens, Craig W.; Zeng Ming; Stamato, Thomas; Cerniglia, George

    1997-01-01

    Purpose/Objective: The major stumbling block to successful gene therapy today is poor gene transfer. We hypothesized that ionizing radiation might activate cellular recombination, and so improve stable gene transfer. We further hypothesized that known DNA-damage-repair proteins might also be important in radiation-activated recombination. Materials and Methods: The effect of irradiation on stable gene transfer efficiency was determined in human (A549 and 39F) and rodent (NIH/3T3) cell lines. Continuous low dose rate and multiple radiation fractions were also tested. Nuclear extracts were made and the effect of irradiation on inter-plasmid recombination/ligation determined. Multiple DNA damage-repair deficient cell lines were tested for radiation-activated recombination. Results: A significant radiation dose-dependent improvement in stable plasmid transfection (by as much as 1300 fold) is demonstrated in neoplastic and primary cells. An improvement in transient plasmid transfection is also seen, with as much as 85% of cells transiently expressing b-galactosidase (20-50 fold improvement). Stable transfection is only improved for linearized or nicked plasmids. Cells have improved gene transfer for at least 96 hours after irradiation. Both fractionated and continuous low dose rate irradiation are effective at improving stable gene transfer in mammalian cells, thus making relatively high radiation dose delivery clinically feasible. Inter-plasmid recombination is radiation dose dependent in nuclear extract assays, and the type of overhang (3', 5' or blunt end) significantly affects recombination efficiency and the type of product. The most common end-joining activity involves filling-in of the overhang followed by blunt end ligation. Adenovirus is a linear, double stranded DNA virus. We demonstrate that adenoviral infection efficiency is increased by irradiation. The duration of transgene expression is lengthened because the virus integrates with high efficiency (∼10

  11. Tokamak fuelling with pellets: Effect of transport phenomena on the injection requirements

    International Nuclear Information System (INIS)

    Lengyel, L.L.

    1979-01-01

    Results of calculations on pellet-plasma interaction that take into account transport phenomena inherent in tokamak plasmas are analyzed. It is shown that the results obtained by different authors on the optimum pellet penetration depth and required pellet injection frequencies, which are partly contradictory, can be explained by means of the different transport processes taken into account or neglected in the calculations concerned. (orig.)

  12. Frequency of streamflow measurements required to determine forest treatment effects

    Science.gov (United States)

    Kenneth G. Reinhart

    1964-01-01

    Most of the stream-discharge records for our experimental watersheds are taken by continuous measurements. But the question arises: are continuous measurements necessary to determine effects of forest treatments? Or could treatment effects be determined by measurement of discharge at intervals, say, once a day or once a week?

  13. Tunable microwave photonic filter free from baseband and carrier suppression effect not requiring single sideband modulation using a Mach-Zenhder configuration.

    Science.gov (United States)

    Mora, José; Ortigosa-Blanch, Arturo; Pastor, Daniel; Capmany, José

    2006-08-21

    We present a full theoretical and experimental analysis of a novel all-optical microwave photonic filter combining a mode-locked fiber laser and a Mach-Zenhder structure in cascade to a 2x1 electro-optic modulator. The filter is free from the carrier suppression effect and thus it does not require single sideband modulation. Positive and negative coefficients are obtained inherently in the system and the tunability is achieved by controlling the optical path difference of the Mach-Zenhder structure.

  14. 76 FR 1213 - Core Principles and Other Requirements for Swap Execution Facilities

    Science.gov (United States)

    2011-01-07

    ... Part II Commodity Futures Trading Commission 17 CFR Part 37 Core Principles and Other Requirements... RIN Number 3038-AD18 Core Principles and Other Requirements for Swap Execution Facilities AGENCY... Compliance With the Core Principles III. Effective Date and Transition Period IV. Related Matters A...

  15. Leadership and Management for Safety. General Safety Requirements

    International Nuclear Information System (INIS)

    2016-01-01

    This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

  16. Protein import into chloroplasts requires a chloroplast ATPase

    International Nuclear Information System (INIS)

    Pain, D.; Blobel, G.

    1987-01-01

    The authors have transcribed mRNA from a cDNA clone coding for pea ribulose-1,5-bisphosphate carboxylase, translated the mRNA in a wheat germ cell-free system, and studied the energy requirement for posttranslational import of the [ 35 S]methionine-labeled protein into the stroma of pea chloroplasts. They found that import depends on ATP hydrolysis within the stroma. Import is not inhibited when H + , K + , Na + , or divalent cation gradients across the chloroplast membranes are dissipated by ionophores, as long as exogenously added ATP is also present during the import reaction. The data suggest that protein import into the chloroplast stroma requires a chloroplast ATPase that does not function to generate a membrane potential for driving the import reaction but that exerts its effect in another, yet-to-be-determined, mode. They have carried out a preliminary characterization of this ATPase regarding its nucleotide specificity and the effects of various ATPase inhibitors

  17. Protein import into chloroplasts requires a chloroplast ATPase

    Energy Technology Data Exchange (ETDEWEB)

    Pain, D.; Blobel, G.

    1987-05-01

    The authors have transcribed mRNA from a cDNA clone coding for pea ribulose-1,5-bisphosphate carboxylase, translated the mRNA in a wheat germ cell-free system, and studied the energy requirement for posttranslational import of the (/sup 35/S)methionine-labeled protein into the stroma of pea chloroplasts. They found that import depends on ATP hydrolysis within the stroma. Import is not inhibited when H/sup +/, K/sup +/, Na/sup +/, or divalent cation gradients across the chloroplast membranes are dissipated by ionophores, as long as exogenously added ATP is also present during the import reaction. The data suggest that protein import into the chloroplast stroma requires a chloroplast ATPase that does not function to generate a membrane potential for driving the import reaction but that exerts its effect in another, yet-to-be-determined, mode. They have carried out a preliminary characterization of this ATPase regarding its nucleotide specificity and the effects of various ATPase inhibitors.

  18. Transportation System Requirements Document

    International Nuclear Information System (INIS)

    1993-09-01

    This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

  19. Site evaluation for nuclear installations. Safety requirements

    International Nuclear Information System (INIS)

    2003-01-01

    This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Siting, which was issued in 1988 as Safety Series No. 50-C-S (Rev. 1). It takes account of developments relating to site evaluations for nuclear installations since the Code on Siting was last revised. These developments include the issuing of the Safety Fundamentals publication on The Safety of Nuclear Installations, and the revision of various safety standards and other publications relating to safety. Requirements for site evaluation are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear installations. It is recognized that there are steady advances in technology and scientific knowledge, in nuclear safety and in what is considered adequate protection. Safety requirements change with these advances and this publication reflects the present consensus among States. This Safety Requirements publication was prepared under the IAEA programme on safety standards for nuclear installations. It establishes requirements and provides criteria for ensuring safety in site evaluation for nuclear installations. The Safety Guides on site evaluation listed in the references provide recommendations on how to meet the requirements established in this Safety Requirements publication. The objective of this publication is to establish the requirements for the elements of a site evaluation for a nuclear installation so as to characterize fully the site specific conditions pertinent to the safety of a nuclear installation. The purpose is to establish requirements for criteria, to be applied as appropriate to site and site-installation interaction in operational states and accident conditions, including those that could lead to emergency measures for: (a) Defining the extent of information on a proposed site to be presented by the applicant; (b) Evaluating a proposed site to ensure that the site

  20. Cross-Cultural Competence: Leader Requirements for Intercultural Effectiveness in the Human Domain

    Science.gov (United States)

    2014-06-13

    patience with me along the way. I also need to thank the Combined Arms Research Library staff for their assistance in many different ways, and the staff...and low levels of ethnocentrism required in jobs with complex international and multicultural responsibilities, as found in the empirical study by... multicultural perspective taking skills. Technical Report, U.S. Army Research Institute for the Behavioral and Social Sciences, Fort Belvoir, VA

  1. Hypothermia for Patients Requiring Evacuation of Subdural Hematoma: Effect on Spreading Depolarizations

    Science.gov (United States)

    2017-10-01

    into HOPES protocols and databases. Subaward contracts were established and local ethical study approvals were obtained at three of four proposed... Ethical approvals at all sites and DOD/OHRP  Open enrollment CY18-19 Goals – Patient enrollment  Patient enrollment and data collection...SD in relation to patient outcomes Comments/Challenges/ Issues /Concerns: 1) EFIC trial requires SecArm approval. 2) Enrollment expected to be slow

  2. 2008 wind farm submission requirements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-05-01

    Wind turbines used to generate electricity can have important visual, environmental and amenity impacts depending on their location. Planning can contribute to the provision of renewable energy by enabling wind energy development in appropriate locations in a manner that appropriately balances their environmental, social and economic benefits with any demonstrated visual, environmental and amenity impacts. The County of Bruce, Ontario and member municipalities are attempting to balance these matters in favour of an overall net community benefit. Planning applications need to include sufficient information and explanation to allow the approval authorities to come to a sound and timely decision, in order to facilitate a viable wind energy industry. This document outlined the County of Bruce application requirements in order to assist in the design and siting of proposed wind energy facilities and in preparing planning applications. The County of Bruce official plan and policies for large wind energy conversion systems (LWECS) were presented. Submissions requirements include an environmental screening report; a federal environmental assessment clearance; a prime agricultural land justification report; a general project description; turbine specifications; noise evaluation; shadow flicker calculations; visual effect modelling; NAV Canada/Transport Canada clearance; grid connections and routing; project staging; overshadowing study; electromagnetic interference study; turbine foundation drawings; and an environmental management plan. Other requirements include lot level maps; project area maps; sensitive receptor table; shadow flicker; stage 2 archaeological study; type certification; statement of planning policy conformity; and a submission checklist. 6 refs., 1 tab., 3 appendices.

  3. Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

    OpenAIRE

    Alsahli, Abdulaziz; Khan, Hameed; Alyahya, Sultan

    2016-01-01

    Requirement change management (RCM) is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD).The o...

  4. The force required to fracture endodontically roots restored with ...

    African Journals Online (AJOL)

    Nigerian Journal of Clinical Practice ... Objective: To evaluate the effect of various materials as intra‑orifice barriers on the force required fracture roots. ... prepared, but not filled), filling using glass ionomer cement, nano‑hybrid composite resin, ...

  5. 393 Competencies Required by Primary School Supervisors: Basis ...

    African Journals Online (AJOL)

    Nekky Umera

    in Onitsha Education Zone, specifically, in all the Public Primary Schools in the three Local ... the competencies instruction supervisors require for effective supervision. Mean .... that…. have little to do with actual classroom observation nor improvement ..... Table 2: t-test comparison of the mean ratings of head teachers and.

  6. 75 FR 21523 - Airworthiness Standards; Rotor Overspeed Requirements

    Science.gov (United States)

    2010-04-26

    ...- Engine-Inoperative (OEI) ratings. Overspeed Capability. The r.p.m. (revolutions per minute) at which the... regulation justify its costs. Second, the Regulatory Flexibility Act of 1980 (Pub. L. 96-354) requires... should be clear. The net effect of this proposed rule would provide regulatory cost relief. Second, all...

  7. Replacing reserve requirements

    OpenAIRE

    Edward J. Stevens

    1993-01-01

    An examination of the fading significance of the Federal Reserve System's reserve requirements and the recent flowering of required clearing balances, a rapidly growing feature of Reserve Bank operations.

  8. Some general requirements for irradiation experiments

    Energy Technology Data Exchange (ETDEWEB)

    Myers, H P; Skjoeldebrand, R

    1960-05-15

    This paper is limited to the interests of the EAES-symposium, namely the use of reactors for materials research and testing, for convenience we exclude consideration of chemical effects and problems of coolant technology. Its purpose is to try to define the general requirements for irradiation experiments and the reactors housing them; to see what facilities for irradiation experiments are available within the European Atomic Energy Society countries and finally, to point out possible limitations of these facilities.

  9. Requirements for tokamak remote operation: Application to JT-60SA

    International Nuclear Information System (INIS)

    Innocente, Paolo; Barbato, Paolo; Farthing, Jonathan; Giruzzi, Gerardo; Ide, Shunsuke; Imbeaux, Frédéric; Joffrin, Emmanuel; Kamada, Yutaka; Kühner, Georg; Naito, Osamu; Urano, Hajime; Yoshida, Maiko

    2015-01-01

    Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

  10. Requirements for tokamak remote operation: Application to JT-60SA

    Energy Technology Data Exchange (ETDEWEB)

    Innocente, Paolo, E-mail: paolo.innocente@igi.cnr.it [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Barbato, Paolo [Consorzio RFX, Corso Stati Uniti 4, 35127 Padova (Italy); Farthing, Jonathan [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Giruzzi, Gerardo [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Ide, Shunsuke [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Imbeaux, Frédéric; Joffrin, Emmanuel [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Kamada, Yutaka [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Kühner, Georg [Max-Planck-Institute for Plasma Physics, EURATOM Association, Wendelsteinstr. 1, 17491 Greifswald (Germany); Naito, Osamu; Urano, Hajime; Yoshida, Maiko [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan)

    2015-10-15

    Highlights: • We analyzed the data management system (DMS) appropriate for international collaboration. • We define the principal requirements for all components of the DMS. • We evaluated application of DMS requirements to the JT-60SA experiment. • We evaluated the role network bandwidth and time delay between EU and Japan. - Abstract: Remote operation and data analysis are becoming key requirements of any fusion devices. In this framework a well-conceived data management system integrated with a suite of analysis and support tools are essential components for an efficient remote exploitation of any fusion device. The following components must be considered: data archiving data model architecture; remote data and computers access; pulse schedule, data analysis software and support tools; remote control room specifications and security issues. The definition of a device-generic data model plays also important role in improving the ability to share solution and reducing learning time. As for the remote control room, the implementation of an Operation Request Gateway has been identified as an answer to security issues meanwhile remotely proving all the required features to effectively operate a device. Previous requirements have been analyzed for the new JT-60SA tokamak device. Remote exploitation is paramount in the JT-60SA case which is expected to be jointly operated between Japan and Europe. Due to the geographical distance of the two parties an optimal remote operation and remote data-analysis is considered as a key requirement in the development of JT-60SA. It this case the effects of network speed and delay have been also evaluated and tests have confirmed that the performance can vary significantly depending on the technology used.

  11. MORE. Management of Requirements in NPP modernisation projects - Project report 2005

    International Nuclear Information System (INIS)

    Thunem, A.P.J.; Fredriksen, R.; Thunem, H.P.J.; Ventae, O.; Valkonen, J.; Holmberg, J.E.

    2006-04-01

    The overall objective of the project MORE is to improve the means for managing the large amounts of evolving requirements in Nordic NPP modernisation projects. In accordance to this objective, the activity will facilitate the industrial utilisation of the research results from the project TACO. On the basis of experiences in the Nordic countries, the overall aim of the TACO project has been to identify the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements. The project resulted in the development of a traceability model for handling requirements from their origins and through their final shapes. Particular emphasis for the MORE project in 2005 was put on utilising a prototype of a tool (TRACE) intended to support an adopted approach to dependable requirements engineering, suitable for modelling and handling large amounts of requirements related to all stages of the systems development process and not only those traditionally including requirements at high-level stages. (au)

  12. MORE. Management of Requirements in NPP modernisation projects - Project report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Thunem, A.P.J.; Fredriksen, R.; Thunem, H.P.J. [IFE (Norway); Ventae, O.; Valkonen, J.; Holmberg, J.E. [VTT Technical Research Centre of Finland (Finland)

    2006-04-15

    The overall objective of the project MORE is to improve the means for managing the large amounts of evolving requirements in Nordic NPP modernisation projects. In accordance to this objective, the activity will facilitate the industrial utilisation of the research results from the project TACO. On the basis of experiences in the Nordic countries, the overall aim of the TACO project has been to identify the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements. The project resulted in the development of a traceability model for handling requirements from their origins and through their final shapes. Particular emphasis for the MORE project in 2005 was put on utilising a prototype of a tool (TRACE) intended to support an adopted approach to dependable requirements engineering, suitable for modelling and handling large amounts of requirements related to all stages of the systems development process and not only those traditionally including requirements at high-level stages. (au)

  13. Optimizing cementious content in concrete mixtures for required performance.

    Science.gov (United States)

    2012-01-01

    "This research investigated the effects of changing the cementitious content required at a given water-to-cement ratio (w/c) on workability, strength, and durability of a concrete mixture. : An experimental program was conducted in which 64 concrete ...

  14. TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

    International Nuclear Information System (INIS)

    2004-01-01

    This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

  15. Closure requirements

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    Closure of a waste management unit can be either permanent or temporary. Permanent closure may be due to: economic factors which make it uneconomical to mine the remaining minerals; depletion of mineral resources; physical site constraints that preclude further mining and beneficiation; environmental, regulatory or other requirements that make it uneconomical to continue to develop the resources. Temporary closure can occur for a period of several months to several years, and may be caused by factors such as: periods of high rainfall or snowfall which prevent mining and waste disposal; economic circumstances which temporarily make it uneconomical to mine the target mineral; labor problems requiring a cessation of operations for a period of time; construction activities that are required to upgrade project components such as the process facilities and waste management units; and mine or process plant failures that require extensive repairs. Permanent closure of a mine waste management unit involves the provision of durable surface containment features to protect the waters of the State in the long-term. Temporary closure may involve activities that range from ongoing maintenance of the existing facilities to the installation of several permanent closure features in order to reduce ongoing maintenance. This paper deals with the permanent closure features

  16. Hanford analytical services quality assurance requirements documents. Volume 1: Administrative Requirements

    International Nuclear Information System (INIS)

    Hyatt, J.E.

    1997-01-01

    Hanford Analytical Services Quality Assurance Requirements Document (HASQARD) is issued by the Analytical Services, Program of the Waste Management Division, US Department of Energy (US DOE), Richland Operations Office (DOE-RL). The HASQARD establishes quality requirements in response to DOE Order 5700.6C (DOE 1991b). The HASQARD is designed to meet the needs of DOE-RL for maintaining a consistent level of quality for sampling and field and laboratory analytical services provided by contractor and commercial field and laboratory analytical operations. The HASQARD serves as the quality basis for all sampling and field/laboratory analytical services provided to DOE-RL through the Analytical Services Program of the Waste Management Division in support of Hanford Site environmental cleanup efforts. This includes work performed by contractor and commercial laboratories and covers radiological and nonradiological analyses. The HASQARD applies to field sampling, field analysis, and research and development activities that support work conducted under the Hanford Federal Facility Agreement and Consent Order Tri-Party Agreement and regulatory permit applications and applicable permit requirements described in subsections of this volume. The HASQARD applies to work done to support process chemistry analysis (e.g., ongoing site waste treatment and characterization operations) and research and development projects related to Hanford Site environmental cleanup activities. This ensures a uniform quality umbrella to analytical site activities predicated on the concepts contained in the HASQARD. Using HASQARD will ensure data of known quality and technical defensibility of the methods used to obtain that data. The HASQARD is made up of four volumes: Volume 1, Administrative Requirements; Volume 2, Sampling Technical Requirements; Volume 3, Field Analytical Technical Requirements; and Volume 4, Laboratory Technical Requirements. Volume 1 describes the administrative requirements

  17. Capital requirement, bank competition and stability in Africa

    Directory of Open Access Journals (Sweden)

    Jacob Oduor

    2017-06-01

    Full Text Available Monetary authorities around the world are implementing enhanced banking capital adequacy requirements under Basel III meant to improve financial stability. Critics however argue that increased capital requirements concentrate the banking industry reducing competition while not guaranteeing financial sector stability. Using data from 167 banks in 37 African countries, we find that increased capital beef-up significantly increases financial instability in Africa (except in big banks implying that higher capital requirements did not make African banks safer. We also find that increased regulatory capital improves competitive pricing for foreign banks while it makes domestic banks less competitive mainly attributed to the high cost of sourcing and holding extra capital for domestic banks compared to foreign banks who can source cheaper capital from parent companies. The results put to question the effectiveness of enhanced regulatory capital on stability and competitiveness of the African financial system.

  18. Requirements Development Issues for Advanced Life Support Systems: Solid Waste Management

    Science.gov (United States)

    Levri, Julie A.; Fisher, John W.; Alazraki, Michael P.; Hogan, John A.

    2002-01-01

    Long duration missions pose substantial new challenges for solid waste management in Advanced Life Support (ALS) systems. These possibly include storing large volumes of waste material in a safe manner, rendering wastes stable or sterilized for extended periods of time, and/or processing wastes for recovery of vital resources. This is further complicated because future missions remain ill-defined with respect to waste stream quantity, composition and generation schedule. Without definitive knowledge of this information, development of requirements is hampered. Additionally, even if waste streams were well characterized, other operational and processing needs require clarification (e.g. resource recovery requirements, planetary protection constraints). Therefore, the development of solid waste management (SWM) subsystem requirements for long duration space missions is an inherently uncertain, complex and iterative process. The intent of this paper is to address some of the difficulties in writing requirements for missions that are not completely defined. This paper discusses an approach and motivation for ALS SWM requirements development, the characteristics of effective requirements, and the presence of those characteristics in requirements that are developed for uncertain missions. Associated drivers for life support system technological capability are also presented. A general means of requirements forecasting is discussed, including successive modification of requirements and the need to consider requirements integration among subsystems.

  19. Analysis of impact of noncompliance with physical-security requirements at nuclear facilities

    International Nuclear Information System (INIS)

    Green, J.N.

    1982-03-01

    Inspectors are required to analyze the impact of instances of noncompliance with physical security requirements at licensed nuclear facilities. A scoring procedure for components and a method for evaluating the effectiveness of the subsystems involved are proposed to reinforce an inspector's judgment about the remaining level of safeguards

  20. The effect of regulatory requirements on the control and instrumentation system designer

    International Nuclear Information System (INIS)

    Golder, J.A.

    1978-01-01

    The difficulties encountered by the designer of control and protection systems for nuclear plant in attempting to satisfy the large number of imprecise regulations and recommendations which exist are described. The absence of fundamental quantitative safety requirements of international acceptability is deplored and the adoption of a major incident criteria expressed in quantitative terms as the basis for the derivation of target design criteria for protection systems and plant components is suggested. (author)

  1. Reserve requirements and double Bertrand competition among banks

    NARCIS (Netherlands)

    Toolsema-Veldman, Linda

    The paper considers a model of double Bertrand competition among banks, in which banks compete for deposits as well as loans. It is shown that the introduction of reserve requirements can have an effect on the existence and efficiency properties of Nash equilibria of this model. This provides a new

  2. An Analysis of BIM Web Service Requirements and Design to Support Energy Efficient Building Lifecycle

    Directory of Open Access Journals (Sweden)

    Yufei Jiang

    2016-04-01

    Full Text Available Energy Efficient Building (EEB design, construction, and operations require the development and sharing of building information among different individuals, organizations, and computer applications. The Representational State Transfer (RESTful Building Information Modeling (BIM web service is a solution to enable an effective exchange of data. This paper presents an investigation into the core RESTful web service requirements needed to effectively support the EEB project lifecycle. The requirements include information exchange requirements, distributed collaboration requirements, internal data storage requirements, and partial model query requirements. We also propose a RESTful web service design model on different abstraction layers to enhance the BIM lifecycle in energy efficient building design. We have implemented a RESTful Application Program Interface (API prototype on a mock BIMserver to demonstrate our idea. We evaluate our design by conducting a user study based on the Technology Acceptance Model (TAM. The results show that our design can enhance the efficiency of data exchange in EEB design scenarios.

  3. Current-use pesticides in stream water and suspended particles following runoff: exposure, effects, and mitigation requirements.

    Science.gov (United States)

    Bereswill, Renja; Streloke, Martin; Schulz, Ralf

    2013-06-01

    The European Union's directive for sustainable use of pesticides requires implementing risk mitigation measures at streams threatened by pesticide entries. The need for mitigation measures was investigated at 10 stream sites within an intensively used arable region in central Germany by characterizing pesticide exposure following edge-of-field runoff and effects on the aquatic macroinvertebrates. Moreover, the influence of riparian buffer strip width (as a mitigation measure) at the sampling sites was considered. Generally, invertebrate fauna was dominated by pesticide-tolerant species, suggesting a high pesticide exposure at almost all sites. This result is also reflected by the elevated levels of suspended particle contamination in terms of toxic units (logTUMax  > -2), corresponding to one-hundredth of the median lethal concentration (LC50) to Daphnia magna. At two sites that received high aqueous-phase entries of the pyrethroid lambda-cyhalothrin (logTUMax  > -0.6), the abundance and number of sensitive species in terms of the species at risk index decreased during the pesticide application period. In contrast, no acute significant negative effects on macroinvertebrates were observed at sites characterised by low water-phase toxicity (logTUMax  < -3.5). An influence of riparian buffer strip width on pesticide exposure was not observed, supposedly because of the presence of erosion rills and ephemeral ditches. In conclusion, results show that mitigation measures (such as the improvement of currently present riparian buffer strips) are needed in the study area. Copyright © 2013 SETAC.

  4. Effect of perioperative administration of dexketoprofen on opioid requirements and inflammatory response following elective hip arthroplasty.

    LENUS (Irish Health Repository)

    Iohom, G

    2012-02-03

    BACKGROUND: In this double-blind, randomized, placebo-controlled trial, the safety and analgesic efficacy of perioperative dexketoprofen were evaluated. METHODS: Thirty ASA I or II patients undergoing elective hip arthroplasty were randomized to one of two groups. One group (D) received dexketoprofen 25 mg tds for 24 h before and 48 h after surgery; the second group (P) received placebo tablets at equivalent times. Hyperbaric 0.5% bupivacaine (17.5 mg if greater than 70 kg and 15 mg if less than 70 kg) and preservative-free morphine (0.6 mg) were administered intrathecally. Postoperatively, PCA was provided (bolus morphine sulphate 1 mg; lockout 5 min; no continuous infusion). RESULTS: The two groups were similar in terms of age, gender, weight, height, ASA class, duration of operation, and level of sensory block on arrival to the recovery room. Groups were also similar in terms of blood loss, transfusion requirements, ventilatory frequency, and haemodynamic variables. According to visual analogue pain scores patients in group D experienced less pain at 15 h (P=0.02) postoperatively. Cumulative morphine consumption was also less in group D compared with group P at 6 (0.06 (0.2) vs 0.85 (1.4) mg, P=0.04) and 48 h postoperatively (10.1 (8) vs 26.2 (20) mg, P<0.01). Plasma interleukin 6 concentrations increased postoperatively to a significantly lesser extent in group D than in group P (P=0.02). Nausea and vomiting were less (P<0.01) in group D compared with group P at 18 h postoperatively. Sedation scores were less (P=0.03) in group D. CONCLUSIONS: Perioperative administration of dexketoprofen 25 mg 8 hourly markedly improves analgesia and decreases opioid requirements (and associated adverse effects) following hip arthroplasty. It appears that this regimen decreases the postoperative pro-inflammatory response.

  5. Coagulation of some humic acid solutions by Moringa oleifera lam seeds: effect on chlorine requirement

    Directory of Open Access Journals (Sweden)

    L.M. Bawa

    2001-12-01

    Full Text Available Experiments were carried out to study humic acid solutions and surface waters coagulation by Moringa oleifera Lam seeds aqueous extract. High amounts of such extract (up to 10 g/L were required to clarify humic acid solutions whereas 0.5 g/L were used to remove 90% of initial turbidity of a surface water. The treatment of water with low turbidity (Moringa oleifera Lam seeds extract released a high amount of organic compounds in treated solutions leading to a high chlorine requirement.

  6. Conversion of dependability deterministic requirements into probabilistic requirements

    International Nuclear Information System (INIS)

    Bourgade, E.; Le, P.

    1993-02-01

    This report concerns the on-going survey conducted jointly by the DAM/CCE and NRE/SR branches on the inclusion of dependability requirements in control and instrumentation projects. Its purpose is to enable a customer (the prime contractor) to convert into probabilistic terms dependability deterministic requirements expressed in the form ''a maximum permissible number of failures, of maximum duration d in a period t''. The customer shall select a confidence level for each previously defined undesirable event, by assigning a maximum probability of occurrence. Using the formulae we propose for two repair policies - constant rate or constant time - these probabilized requirements can then be transformed into equivalent failure rates. It is shown that the same formula can be used for both policies, providing certain realistic assumptions are confirmed, and that for a constant time repair policy, the correct result can always be obtained. The equivalent failure rates thus determined can be included in the specifications supplied to the contractors, who will then be able to proceed to their previsional justification. (author), 8 refs., 3 annexes

  7. Requirements in engineering projects

    CERN Document Server

    Fernandes, João M

    2016-01-01

    This book focuses on various topics related to engineering and management of requirements, in particular elicitation, negotiation, prioritisation, and documentation (whether with natural languages or with graphical models). The book provides methods and techniques that help to characterise, in a systematic manner, the requirements of the intended engineering system.  It was written with the goal of being adopted as the main text for courses on requirements engineering, or as a strong reference to the topics of requirements in courses with a broader scope. It can also be used in vocational courses, for professionals interested in the software and information systems domain.   Readers who have finished this book will be able to: - establish and plan a requirements engineering process within the development of complex engineering systems; - define and identify the types of relevant requirements in engineering projects; - choose and apply the most appropriate techniques to elicit the requirements of a giv...

  8. Critical Business Requirements Model and Metrics for Intranet ROI

    OpenAIRE

    Luqi; Jacoby, Grant A.

    2005-01-01

    Journal of Electronic Commerce Research, Vol. 6, No. 1, pp. 1-30. This research provides the first theoretical model, the Intranet Efficiency and Effectiveness Model (IEEM), to measure intranet overall value contributions based on a corporation’s critical business requirements by applying a balanced baseline of metrics and conversion ratios linked to key business processes of knowledge workers, IT managers and business decision makers -- in effect, closing the gap of understanding...

  9. Effect of antifibrinolytic drugs on transfusion requirement and blood loss during orthotopic liver transplantation: Results from a single center

    Directory of Open Access Journals (Sweden)

    Devi A

    2008-01-01

    Full Text Available Background: During orthotopic liver transplantation (OLT, activation of the fibrinolytic system can contribute significantly to perioperative bleeding. Prophylactic administration of antifibrinolytic agents has been shown to reduce blood loss and the need for allogenic transfusion. Objective: To study the effect of antifibrinolytics on requirement of blood components, blood loss and operative time during OLT in patients with end stage liver disease, reporting to a single centre. Materials and Methods: Consecutive patients who underwent OLT at this centre during the period February 2003-October 2007 were the subjects of this study. Based on the individual anesthesiologist′s preference, patients were assigned to receive either two million units of aprotinin (AP as a bolus followed by 5,00,000 units/hour or 10 mg/kg tranexamic acid (TAas a bolus followed by 10 mg/kg every six to eight hours, administered from the induction till the end of the surgery. Transfusion policy was standardized in all patients. Intraoperative red cell salvage was done wherever possible. The effect of these two antifibrinolytic drugs on transfusion requirement was evaluated as a whole and in a sub group of patients from each treatment group and compared with a concurrent control group that did not receive antifibrinolytic drugs. Results: Fifty patients (40 M / 10 F, 44 adults, 6 pediatric patients underwent OLT in the study period. Fourteen patients were given AP, 25 patients were given TA and 11 patients did not receive any of the agents(control group. The median volume of total blood components transfused in antifibrinolytic group (n=39 was 4540 ml(0-19,200ml, blood loss 5 l(0.7-35l and operative time 9h (4.5-17h and that of control group(n=11 was 5700 ml(0-15,500ml, 10 l(0.6-25 l and 9h (6.4-15.8h respectively. The median volume of blood transfusions, blood loss and operative time was lesser in AP group(n=14 than that of TA group(n=25. Conclusion: There is definite

  10. Melatonin antiproliferative effects require active mitochondrial function in embryonal carcinoma cells

    Science.gov (United States)

    Loureiro, Rute; Magalhães-Novais, Silvia; Mesquita, Katia A.; Baldeiras, Ines; Sousa, Isabel S.; Tavares, Ludgero C.; Barbosa, Ines A.; Oliveira, Paulo J.; Vega-Naredo, Ignacio

    2015-01-01

    Although melatonin oncostatic and cytotoxic effects have been described in different types of cancer cells, the specific mechanisms leading to its antitumoral effects and their metabolic context specificity are still not completely understood. Here, we evaluated the effects of melatonin in P19 embryonal carcinoma stem cells (CSCs) and in their differentiated counterparts, cultured in either high glucose medium or in a galactose (glucose-free) medium which leads to glycolytic suppression and increased mitochondrial metabolism. We found that highly glycolytic P19 CSCs were less susceptible to melatonin antitumoral effects while cell populations relying on oxidative metabolism for ATP production were more affected. The observed antiproliferative action of melatonin was associated with an arrest at S-phase, decreased oxygen consumption, down-regulation of BCL-2 expression and an increase in oxidative stress culminating with caspase-3-independent cell death. Interestingly, the combined treatment of melatonin and dichloroacetate had a synergistic effect in cells grown in the galactose medium and resulted in an inhibitory effect in the highly resistant P19 CSCs. Melatonin appears to exert its antiproliferative activity in P19 carcinoma cells through a mitochondrially-mediated action which in turn allows the amplification of the effects of dichloroacetate, even in cells with a more glycolytic phenotype. PMID:26025920

  11. From requirements to Java in a snap model-driven requirements engineering in practice

    CERN Document Server

    Smialek, Michal

    2015-01-01

    This book provides a coherent methodology for Model-Driven Requirements Engineering which stresses the systematic treatment of requirements within the realm of modelling and model transformations. The underlying basic assumption is that detailed requirements models are used as first-class artefacts playing a direct role in constructing software. To this end, the book presents the Requirements Specification Language (RSL) that allows precision and formality, which eventually permits automation of the process of turning requirements into a working system by applying model transformations and co

  12. Getting Grip on Security Requirements Elicitation by Structuring and Reusing Security Requirements Sources

    Directory of Open Access Journals (Sweden)

    Christian Schmitt

    2015-07-01

    Full Text Available This paper presents a model for structuring and reusing security requirements sources. The model serves as blueprint for the development of an organization-specific repository, which provides relevant security requirements sources, such as security information and knowledge sources and relevant compliance obligations, in a structured and reusable form. The resulting repository is intended to be used by development teams during the elicitation and analysis of security requirements with the goal to understand the security problem space, incorporate all relevant requirements sources, and to avoid unnecessary effort for identifying, understanding, and correlating applicable security requirements sources on a project-wise basis. We start with an overview and categorization of important security requirements sources, followed by the description of the generic model. To demonstrate the applicability and benefits of the model, the instantiation approach and details of the resulting repository of security requirements sources are presented.

  13. Subsurface Contamination Focus Area technical requirements. Volume 1: Requirements summary

    International Nuclear Information System (INIS)

    Nickelson, D.; Nonte, J.; Richardson, J.

    1996-10-01

    This document summarizes functions and requirements for remediation of source term and plume sites identified by the Subsurface Contamination Focus Area. Included are detailed requirements and supporting information for source term and plume containment, stabilization, retrieval, and selective retrieval remedial activities. This information will be useful both to the decision-makers within the Subsurface Contamination Focus Area (SCFA) and to the technology providers who are developing and demonstrating technologies and systems. Requirements are often expressed as graphs or charts, which reflect the site-specific nature of the functions that must be performed. Many of the tradeoff studies associated with cost savings are identified in the text

  14. Evaluation and decision of products conceptual design schemes based on customer requirements

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Hong Zhong; Li, Yan Feng; Liu, Yu; Wang, Zhonglai [University of Electronic Science and Technology of China, Sichuan (China); Liu, Wenhai [2China Science Patent Trademark Agents Ltd., Beijing (China)

    2011-09-15

    Within the competitive market environment, understanding customer requirements is crucial for all corporations to obtain market share and survive competition. Only the products exactly meeting customer requirements can win in the market place. Therefore, customer requirements play a very important role in the evaluation and decision process of conceptual design schemes of products. In this paper, an evaluation and decision method based on customer requirements is presented. It utilizes the importance of customer requirements, the satisfaction degree of each evaluation metric to the specification, and an evaluation metric which models customer requirements to evaluate the satisfaction degree of each design scheme to specific customer requirements via the proposed BP neural networks. In the evaluation and decision process, fuzzy sets are used to describe the importance of customer requirements, the relationship between customer requirements and evaluation metrics, the satisfaction degree of each scheme to customer requirements, and the crisp set is used to describe the satisfaction degree of each metric to specifications. The effectiveness of the proposed method is demonstrated by an example of front suspension fork design of mountain bikes.

  15. Evaluation and decision of products conceptual design schemes based on customer requirements

    International Nuclear Information System (INIS)

    Huang, Hong Zhong; Li, Yan Feng; Liu, Yu; Wang, Zhonglai; Liu, Wenhai

    2011-01-01

    Within the competitive market environment, understanding customer requirements is crucial for all corporations to obtain market share and survive competition. Only the products exactly meeting customer requirements can win in the market place. Therefore, customer requirements play a very important role in the evaluation and decision process of conceptual design schemes of products. In this paper, an evaluation and decision method based on customer requirements is presented. It utilizes the importance of customer requirements, the satisfaction degree of each evaluation metric to the specification, and an evaluation metric which models customer requirements to evaluate the satisfaction degree of each design scheme to specific customer requirements via the proposed BP neural networks. In the evaluation and decision process, fuzzy sets are used to describe the importance of customer requirements, the relationship between customer requirements and evaluation metrics, the satisfaction degree of each scheme to customer requirements, and the crisp set is used to describe the satisfaction degree of each metric to specifications. The effectiveness of the proposed method is demonstrated by an example of front suspension fork design of mountain bikes

  16. TACO - a framework for traceability and communication of requirements

    International Nuclear Information System (INIS)

    Sivertsen, Terje; Fredriksen, Rune; Thunem, Atoosa P-J.; Valkonen, Janne; Holmberg, Jan-Erik; Ventae, Olli; Andersson, Jan-Ove

    2005-06-01

    Several cases from the nuclear industry indicate the importance of clear, complete, and stable requirements from the beginning of the system development project. Since the safety of digital I and C is a property of the system in which it is embedded, the requirements specification of the I and C also plays an important role in the safety assessment of the whole system. In the development of NPP digital I and C systems, it is important to be able to trace the requirements backwards to the safety analysis report and forwards to the implementation (for development and quality control). A practical problem to perform such a trace relates to large amounts of documentation that must be read to produce the requirements specification of the safety systems. An important research task is therefore to identify, develop, or improve techniques that simplify the development and use of the requirement specification. These and related concerns motivated the initiation of the TACO project, and have provided guidance to three years of Nordic collaborative research within the NKS-R programme. The present report summarises the project and its deliverables, first of all the TACO common approach to requirements handling, called the TACO Shell. The overall objective of the TACO project was to improve the knowledge on principles and best practices related to the issues concretised in the preproject. On the basis of experiences in the Nordic countries, the project aimed at identifying the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements through the different design phases. It is expected that the project will provide important input to the development of guidelines and establishment of recommended practices related to activities involving the requirement specification. (Author)

  17. Assessment of requirements for dry towers

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D E; Sonnichsen, J C

    1976-09-01

    The regional limitations of surface water supplies in the U.S. were assessed with respect to the consumptive use requirements of wet cooling towers. The study simulated unit consumptive use factors by region, assessed regional water supplies, and examined electric load projections through 2000 A.D. to ascertain where and when water limitations may occur and, therefore, where dry cooling may be required. It was concluded that the cooling water supply situation in the United States through the year 2000 is adequate in most areas, but is uncertain over much of the Southwest. The uncertainty is related to increasing competition for the available supplies and to potential Federal and/or State policy decisions that may have a significant effect on power plant cooling. Limitations on coastal siting, seismic zone constraints, and state constraints on the purchase and transfer of water rights from other uses to cooling supply have the potential of bringing wet/dry or dry cooling into relatively common use in the 1990's. (LCL)

  18. Improvements to Technical Specifications surveillance requirements

    International Nuclear Information System (INIS)

    Lobel, R.; Tjader, T.R.

    1992-12-01

    In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 (''Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power

  19. 7 CFR 15a.5 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ... the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act (29 U.S.C. 206 and 206(d); and any other act of Congress or Federal regulation. (b) Effect of State or local law or other...

  20. Supplement to safety analysis report. 306-W building operations safety requirement

    International Nuclear Information System (INIS)

    Richey, C.R.

    1979-08-01

    The operations safety requirements (OSRs) presented in this report define the conditions, safe boundaries, and management control needed for safely conducting operations with radioactive materials in the Pacific Northwest Laboratory (PNL) 306-W building. The safety requirements are organized in five sections. Safety limits are safety-related process variables that are observable and measurable. Limiting conditions cover: equipment and technical conditions and characteristics of the facility and operations necessary for continued safe operation. Surveillance requirements prescribe the requirements for checking systems and components that are essential to safety. Equipment design controls require that changes to process equipment and systems be independently checked and approved to assure that the changes will have no adverse effect on safety. Administrative controls describe and discuss the organization and administrative systems and procedures to be used for safe operation of the facility. Details of the implementation of the operations safety requirements are prescribed by internal PNL documents such as criticality safety specifications and radiation work procedures

  1. Data governance requirements for distributed clinical research networks: triangulating perspectives of diverse stakeholders.

    Science.gov (United States)

    Kim, Katherine K; Browe, Dennis K; Logan, Holly C; Holm, Roberta; Hack, Lori; Ohno-Machado, Lucila

    2014-01-01

    There is currently limited information on best practices for the development of governance requirements for distributed research networks (DRNs), an emerging model that promotes clinical data reuse and improves timeliness of comparative effectiveness research. Much of the existing information is based on a single type of stakeholder such as researchers or administrators. This paper reports on a triangulated approach to developing DRN data governance requirements based on a combination of policy analysis with experts, interviews with institutional leaders, and patient focus groups. This approach is illustrated with an example from the Scalable National Network for Effectiveness Research, which resulted in 91 requirements. These requirements were analyzed against the Fair Information Practice Principles (FIPPs) and Health Insurance Portability and Accountability Act (HIPAA) protected versus non-protected health information. The requirements addressed all FIPPs, showing how a DRN's technical infrastructure is able to fulfill HIPAA regulations, protect privacy, and provide a trustworthy platform for research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Developing the skills required for evidence-based practice.

    Science.gov (United States)

    French, B

    1998-01-01

    The current health care environment requires practitioners with the skills to find and apply the best currently available evidence for effective health care, to contribute to the development of evidence-based practice protocols, and to evaluate the impact of utilizing validated research findings in practice. Current approaches to teaching research are based mainly on gaining skills by participation in the research process. Emphasis on the requirement for rigour in the process of creating new knowledge is assumed to lead to skill in the process of using research information created by others. This article reflects upon the requirements for evidence-based practice, and the degree to which current approaches to teaching research prepare practitioners who are able to find, evaluate and best use currently available research information. The potential for using the principles of systematic review as a teaching and learning strategy for research is explored, and some of the possible strengths and weakness of this approach are highlighted.

  3. Waste management system requirements document

    International Nuclear Information System (INIS)

    1991-02-01

    This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

  4. Parameters matching requirements for diesel free piston linear alternator start-up

    Directory of Open Access Journals (Sweden)

    Yan-xiao Li

    2015-03-01

    Full Text Available It is important to identify the relationship between the starting requirements and the structure parameters of the diesel free piston linear alternator on the structural design stage. In this article, the forces applied on the moving part during the starting process are analyzed, and an oscillation model is established. The numerical simulation results of the oscillation model are presented, and the energy-transfer mechanism is analyzed. Then, the oscillation model is simplified by utilizing the energy balance theory. Expressions of the achieved starting frequency and required starting force are derived and the effects of different design variables on them are investigated. The results show that the achieved compression ratio is determined by the energy balance between the friction consumption and the energy supplied by the starting force. The starting frequency achieved and starting force required are associated with the cylinder bore, the moving mass, and effective stroke of the engine, which can be applied to the matching design and optimization of the prototype.

  5. Aging Management Strategy and Requirements of Pressurized Water Reactor Internal Components

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jun Seog; Oh, Sung Jin; Won, Se Yol; Jeong, Sun Mi [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    The demonstration that the effects of degradation in the components of PWR internals are adequately managed is essential for maintaining a healthy fleet and ensuring the continued functionality of the reactor internals. It is also very important to determine when and where irradiation susceptibility may occur for the continued operation. This paper introduces the aging management strategies and requirements for PWR internals components and discusses effects of irradiation aging results from the functionality assessments based on the categorization of internal components. This paper introduces aging management strategies and requirements for PWR internals components. The aging management requirements for PWR internals are specified in four final component groups, which are Primary, Expansion, Existing Program and No Additional Measures. Among these groups, Primary groups include any restriction on general applicability, degradation mechanism, forward link to any Expansion components, examination method, initial examination and frequency, and examination coverage and accessibility. Expansion groups are backward link to the Primary component.

  6. The effects of host, geographic origin, and gender on the thermal requirements of Diaphorina citri (Hemiptera: Psyllidae).

    Science.gov (United States)

    Nava, Dori E; Gomez-Torres, Mariuxi L; Rodrigues, Marjorie D; Bento, José M S; Haddad, Marinéia L; Parra, José R P

    2010-04-01

    Diaphorina citri Kuwayama (Hemiptera: Psyllidae) is the vector of the bacteria that causes citrus greening and is considered one of the world's most important citrus diseases. We examined how host, geographic region, and gender affect the thermal requirements of D. citri. The insects were reared in climatic chambers at constant temperatures of 18, 20, 22, 25, 28, 30, and 32 +/- 1 degrees C, 70 +/- 10% RH, and a 14 h photophase. Host plants for D. citri included orange (Citrus sinensis [Rutaceae]) varieties Pêra and Natal, the rootstock, Rungpur lime (C. limonia [Rutaceae]) and the natural host, Orange jessamine (Murraya paniculata [Rutaceae]). To study the influence of geographic origin on thermal requirements, we studied D. citri populations from Piracicaba, SP (warmer region) and Itapetininga, SP (cooler region). The duration and survival of the development stages and the duration of the total development (egg-adult) did not differ significantly on the different hosts, but it did vary with temperature. Nymphs of D. citri created on the different hosts have the same thermal requirements. The thermal requirements for this species collected from the two climate regions were identical; males and females also had the same thermal requirements.

  7. User Requirements for Wireless

    DEFF Research Database (Denmark)

    in the elicitation process. Cases and user requirement elements discussed in the book include: User requirements elicitation processes for children, construction workers, and farmers User requirements for personalized services of a broadcast company Variations in user involvement Practical elements of user...

  8. Parametric requirements for noncircular tokamak commercial fusion plants

    International Nuclear Information System (INIS)

    Bourque, R.F.

    1978-05-01

    Systems analyses have been performed in order to determine the parameter ranges for economical operation of equilibrium commercial fusion power plants using noncircular tokamak reactors. The fully-integrated systems code SCOPE was employed in which costs of electricity were used as the critical dependent variable by which the effects of changes in system parameters were observed. The results of these studies show that many of the operating parameters required for economical operation can be considerably relaxed from what has been thought necessary. For example: (1) Neutron wall loadings over about 2 megawatts per square meter are unnecessary for economical tokamak operation; (2) electrical power levels beyond 1000 MW(e) are not required. In fact, power levels as low as 100 MW(e) may be acceptable; (3) total beta values of 10 to 12 percent are adequate for economic operation; (4) duty cycles as low as 50 percent have only a small effect on plant economics; (5) an acceptable first wall lifetime is 15 MW-yr per square meter

  9. Future Home Network Requirements

    DEFF Research Database (Denmark)

    Charbonnier, Benoit; Wessing, Henrik; Lannoo, Bart

    This paper presents the requirements for future Home Area Networks (HAN). Firstly, we discuss the applications and services as well as their requirements. Then, usage scenarios are devised to establish a first specification for the HAN. The main requirements are an increased bandwidth (towards 1...

  10. Energy requirements of tire pulling.

    Science.gov (United States)

    Fredriksen, Per M; Mamen, Asgeir

    2017-10-01

    We have investigated the effect using walking poles and pulling tires at 4 and 6 km·h-1 (1.11 and 1.67 m·s-1) speeds on oxygen uptake (V̇O2) and heart rate. Eleven subjects, 6 males, with a mean (SD) age of 25.2 (6.9) years participated in field tests involving walking without poles, walking with poles and tire pulling with poles. Increasing the load caused the largest increases in energy demand, more than 4 MET. Speed increase also caused substantial energy increase, approximately 4 MET. Increasing the inclination only modestly increased the oxygen uptake, approximately 2 MET. In both level walking and uphill walking, using poles marginally increased oxygen uptake compared to working without poles. Pulling one tire (12.5 kg) required an oxygen uptake of 27 (4) mL·kg-1·min-1 at 4 km·h-1 and 0% inclination. Adding one more tire (6 kg) drove the oxygen uptake further up to 39 (4) mL·kg-1·min-1. This is close to the requirement of level running at 10.5 km·h-1. Pulling both tires at 6 km·h-1 and 5% inclination required a V̇O2 of 54 (6) mL·kg-1·min-1, equal to running uphill at 5% inclination and 12.5 km·h-1 speed. Heart rate rose comparably with oxygen uptake. At 4 km·h-1 and 0% inclination the increase was 29 bpm, from 134 (21) to 163 (22) bpm when going from pulling one tire to two tires. In the hardest exercise, 6 km·h-1 and 5% inclination, heart rate reached 174 (14) bpm. The study showed that tire pulling even at slow speeds has an energy requirement that is so large that the activity may be feasible as endurance training.

  11. New mission requirements methodologies for services provided by the Office of Space Communications

    Science.gov (United States)

    Holmes, Dwight P.; Hall, J. R.; Macoughtry, William; Spearing, Robert

    1993-01-01

    The Office of Space Communications, NASA Headquarters, has recently revised its methodology for receiving, accepting and responding to customer requests for use of that office's tracking and communications capabilities. This revision is the result of a process which has become over-burdened by the size of the currently active and proposed missions set, requirements reviews that focus on single missions rather than on mission sets, and negotiations most often not completed early enough to effect needed additions to capacity or capability prior to launch. The requirements-coverage methodology described is more responsive to project/program needs and provides integrated input into the NASA budget process early enough to effect change, and describes the mechanisms and tools in place to insure a value-added process which will benefit both NASA and its customers. Key features of the requirements methodology include the establishment of a mechanism for early identification of and systems trades with new customers, and delegates the review and approval of requirements documents to NASA centers in lieu of Headquarters, thus empowering the system design teams to establish and negotiate the detailed requirements with the user. A Mission Requirements Request (MRR) is introduced to facilitate early customer interaction. The expected result is that the time to achieve an approved set of implementation requirements which meet the customer's needs can be greatly reduced. Finally, by increasing the discipline in requirements management, through the use of base lining procedures, a tighter coupling between customer requirements and the budget is provided. A twice-yearly projection of customer requirements accommodation, designated as the Capacity Projection Plan (CPP), provides customer feedback allowing the entire mission set to be serviced.

  12. Longitudinal change in energy expenditure and effects on energy requirements of the elderly

    Science.gov (United States)

    2013-01-01

    Background Very little is known about the longitudinal changes in energy requirements in late life. The purposes of this study were to: (1) determine the energy requirements in late life and how they changed during a 7 year time-span, (2) determine whether changes in fat free mass (FFM) were related to changes in resting metabolic rate (RMR), and (3) determine the accuracy of predicted total energy expenditure (TEE) to measured TEE. Methods TEE was assessed via doubly labeled water (DLW) technique in older adults in both 1999 (n = 302; age: 74 ± 2.9 yrs) and again in 2006 (n = 87 age: 82 ± 3.1 yrs). RMR was measured with indirect calorimetry, and body composition was assessed with dual-energy x-ray absorptiometry. Results The energy requirements in the 9th decade of life were 2208 ± 376 kcal/d for men and 1814 ± 337 kcal/d for women. This was a significant decrease from the energy requirements in the 8th decade of life in men (2482 ± 476 kcal/d vs. 2208 ± 376 kcal/d) but not in women (1892 ± 271 kcal/d vs. 1814 ± 337 kcal/d). In addition to TEE, RMR, and activity EE (AEE) also decreased in men, but not women, while FFM decreased in both men and women. The changes in FFM were correlated with changes in RMR for men (r = 0.49, p < 0.05) but not for women (r = −0.08, ns). Measured TEE was similar to Dietary Reference Intake (DRI) predicted TEE for men (2208 ± 56 vs. 2305 ± 35 kcal/d) and women (1814 ± 42 vs. 1781 ± 20 kcal/d). However, measured TEE was different than the World Health Organization (WHO) predicted TEE in men (2208 ± 56 vs. 2915 ± 31 kcal/d (p < 0.05)) and women (1814 ± 42 vs. 2315 ± 21 kcal/d (p < 0.05)). Conclusions TEE, RMR and AEE decreased in men, but not women, from the 8th to 9th decade of life. The DRI equation to predict TEE was comparable to measured TEE, while the WHO equation over-predicted TEE in our elderly population

  13. Lack of school requirements and clinician recommendations for human papillomavirus vaccination

    Directory of Open Access Journals (Sweden)

    Linda M. Niccolai

    2018-04-01

    Full Text Available Background: A strong recommendation from a clinician is one of the best predictors of human papillomavirus (HPV vaccination among adolescents, yet many clinicians do not provide effective recommendations. The objective of this study was to understand how the lack of school entry requirements for HPV vaccination influences clinicians’ recommendations. Design and Methods: Semi-structured interviews with a purposive sample of 32 clinicians were conducted in 2015 in Connecticut USA. Data were analysed using an iterative thematic approach in 2016-2017. Results: Many clinicians described presenting HPV vaccination as optional or non-urgent because it is not required for school entry. This was noted to be different from how other required vaccines were discussed. Even strong recommendations were often qualified by statements about the lack of requirements. Furthermore, lack of requirements was often raised initially by clinicians and not by parents. Many clinicians agreed that requirements would simplify the recommendation, but that parents may not agree with requirements. Personal opinions about school entry requirements were mixed. Conclusions: The current lack of school entry requirements for HPV vaccination is an important influence on clinicians’ recommendations that are often framed as optional or non-urgent. Efforts are needed to strengthen the quality of clinicians’ recommendations in a way that remains strong and focused on disease prevention yet uncoupled from the lack of requirements that may encourage delays. Additionally, greater support for requirements among clinicians may be needed to successfully enact requirements in the future.

  14. Requirements model generation to support requirements elicitation: The Secure Tropos experience

    NARCIS (Netherlands)

    Kiyavitskaya, N.; Zannone, N.

    2008-01-01

    In recent years several efforts have been devoted by researchers in the Requirements Engineering community to the development of methodologies for supporting designers during requirements elicitation, modeling, and analysis. However, these methodologies often lack tool support to facilitate their

  15. The use of multiple respiratory inhalers requiring different inhalation techniques has an adverse effect on COPD outcomes

    Directory of Open Access Journals (Sweden)

    Bosnic-Anticevich S

    2016-12-01

    Full Text Available Sinthia Bosnic-Anticevich,1 Henry Chrystyn,2 Richard W Costello,3,4 Myrna B Dolovich,5 Monica J Fletcher,6 Federico Lavorini,7 Roberto Rodríguez-Roisin,8 Dermot Ryan,9,10 Simon Wan Yau Ming,2 David B Price2,11 1Woolcock Institute of Medical Research, School of Medical Sciences, University of Sydney and Sydney Local Health District, Sydney, NSW, Australia; 2Observational and Pragmatic Research Institute Pte Ltd, Singapore; 3RCSI Medicine, Royal College of Surgeons, 4RCSI Education & Research Centre, Beaumont Hospital, Beaumont, Dublin, Ireland; 5Department of Medicine, Respirology, McMaster University, ON, Canada; 6Education for Health, Warwick, UK; 7Department of Experimental and Clinical Medicine, University of Florence, Florence, Italy; 8Respiratory Institute, Hospital Clinic, Universitat de Barcelona, Barcelona, Spain; 9Optimum Patient Care, Cambridge, 10Centre for Population Health Sciences, University of Edinburgh, Edinburgh, 11Academic Primary Care, University of Aberdeen, Aberdeen, UK Background: Patients with COPD may be prescribed multiple inhalers as part of their treatment regimen, which require different inhalation techniques. Previous literature has shown that the effectiveness of inhaled treatment can be adversely affected by incorrect inhaler technique. Prescribing a range of device types could worsen this problem, leading to poorer outcomes in COPD patients, but the impact is not yet known. Aims: To compare clinical outcomes of COPD patients who use devices requiring similar inhalation technique with those who use devices with mixed techniques. Methods: A matched cohort design was used, with 2 years of data from the Optimum Patient Care Research Database. Matching variables were established from a baseline year of follow-up data, and two cohorts were formed: a “similar-devices cohort” and a “mixed-devices cohort”. COPD-related events were recorded during an outcome year of follow-up. The primary outcome measure was an

  16. Effect of Spermidine Analogues on Cell Growth of Escherichia coli Polyamine Requiring Mutant MA261.

    Directory of Open Access Journals (Sweden)

    Taketo Yoshida

    Full Text Available The effects of spermidine analogues [norspermidine (NSPD, 33, spermidine (SPD, 34, homospermidine (HSPD, 44 and aminopropylcadaverine (APCAD, 35] on cell growth were studied using Escherichia coli polyamine-requiring mutant MA261. Cell growth was compared at 32°C, 37°C, and 42°C. All four analogues were taken up mainly by the PotABCD spermidine-preferential uptake system. The degree of stimulation of cell growth at 32°C and 37°C was NSPD ≥ SPD ≥ HSPD > APCAD, and SPD ≥ HSPD ≥ NSPD > APCAD, respectively. However, at 42°C, it was HSPD » SPD > NSPD > APCAD. One reason for this is HSPD was taken up effectively compared with other triamines. In addition, since natural polyamines (triamines and teteraamines interact mainly with RNA, and the structure of RNA is more flexible at higher temperatures, HSPD probably stabilized RNA more tightly at 42°C. We have thus far found that 20 kinds of protein syntheses are stimulated by polyamines at the translational level. Among them, synthesis of OppA, RpoE and StpA was more strongly stimulated by HSPD at 42°C than at 37°C. Stabilization of the initiation region of oppA and rpoE mRNA was tighter by HSPD at 42°C than 37°C determined by circular dichroism (CD. The degree of polyamine stimulation of OppA, RpoE and StpA synthesis by NSPD, SPD and APCAD was smaller than that by HSPD at 42°C. Thus, the degree of stimulation of cell growth by spermidine analogues at the different temperatures is dependent on the stimulation of protein synthesis by some components of the polyamine modulon.

  17. System requirements and design description for the environmental requirements management interface (ERMI)

    International Nuclear Information System (INIS)

    Biebesheimer, E.

    1997-01-01

    This document describes system requirements and the design description for the Environmental Requirements Management Interface (ERMI). The ERMI database assists Tank Farm personnel with scheduling, planning, and documenting procedure compliance, performance verification, and selected corrective action tracking activities for Tank Farm S/RID requirements. The ERMI database was developed by Science Applications International Corporation (SAIC). This document was prepared by SAIC and edited by LMHC

  18. An Architectural Decision Tool Based on Scenarios and Non-functional Requirements

    OpenAIRE

    Mr. Mahesh Parmar; Prof. W.U. Khan; Dr. Binod Kumar

    2011-01-01

    Software architecture design is often based on architects intuition and previous experience. Little methodological support is available, but there are still no effective solutions to guide the architectural design. The most difficult activity is the transformation from non-functional requirement specification into software architecture. To achieve above things proposed “An Architectural Decision Tool Based on Scenarios and Nonfunctional Requirementsâ€. In this proposed tool scenarios are fi...

  19. Requirements for longitudinal HOM damping in superconducting recirculating linacs

    International Nuclear Information System (INIS)

    Bisognano, J.J.; Fripp, M.L.

    1989-01-01

    Transverse beam breakup provides the primary current limitation in the operation of superconducting recirculating linacs and requires the significant damping of transverse-deflecting higher order modes. The need to damp the coexisting longitudinal HOMs in these nominally isochronous machines, however, is not as clear. Isochronicity implies that energy variations induced by excitation of longitudinal modes do not translate directly into position and current modulations. Such modulations, if present, could enhance the initial excitation, effectively closing a potentially unstable feedback loop. Design optimization of cavity structures may suggest that no longitudinal damping be provided. On the other hand, easing of the isochronicity requirement may provide desired flexibility in lattice design. In this note, limits are placed on the requirements for longitudinal HOM damping and on the tolerances for isochronicity which are driven by possible longitudinal multipass phenomena. 2 refs., 1 fig

  20. Information technology - Security techniques - Information security management systems - Requirements

    CERN Document Server

    International Organization for Standardization. Geneva

    2005-01-01

    ISO/IEC 27001:2005 covers all types of organizations (e.g. commercial enterprises, government agencies, not-for profit organizations). ISO/IEC 27001:2005 specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a documented Information Security Management System within the context of the organization's overall business risks. It specifies requirements for the implementation of security controls customized to the needs of individual organizations or parts thereof. ISO/IEC 27001:2005 is designed to ensure the selection of adequate and proportionate security controls that protect information assets and give confidence to interested parties. ISO/IEC 27001:2005 is intended to be suitable for several different types of use, including the following: use within organizations to formulate security requirements and objectives; use within organizations as a way to ensure that security risks are cost effectively managed; use within organizations to ensure comp...

  1. Cathepsins are required for Toll-like receptor 9 responses

    International Nuclear Information System (INIS)

    Matsumoto, Fumi; Saitoh, Shin-ichiroh; Fukui, Ryutaroh; Kobayashi, Toshihiko; Tanimura, Natsuko; Konno, Kazunori; Kusumoto, Yutaka; Akashi-Takamura, Sachiko; Miyake, Kensuke

    2008-01-01

    Toll-like receptors (TLR) recognize a variety of microbial products and activate defense responses. Pathogen sensing by TLR2/4 requires accessory molecules, whereas little is known about a molecule required for DNA recognition by TLR9. After endocytosis of microbes, microbial DNA is exposed and recognized by TLR9 in lysosomes. We here show that cathepsins, lysosomal cysteine proteases, are required for TLR9 responses. A cell line Ba/F3 was found to be defective in TLR9 responses despite enforced TLR9 expression. Functional cloning with Ba/F3 identified cathepsin B/L as a molecule required for TLR9 responses. The protease activity was essential for the complementing effect. TLR9 responses were also conferred by cathepsin S or F, but not by cathepsin H. TLR9-dependent B cell proliferation and CD86 upregulation were apparently downregulated by cathepsin B/L inhibitors. Cathepsin B inhibitor downregulated interaction of CpG-B with TLR9 in 293T cells. These results suggest roles for cathepsins in DNA recognition by TLR9

  2. 12 CFR 564.3 - Appraisals required; transactions requiring a State certified or licensed appraiser.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Appraisals required; transactions requiring a State certified or licensed appraiser. 564.3 Section 564.3 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPRAISALS § 564.3 Appraisals required; transactions requiring a State...

  3. Effective Electronic Security: Process for the Development and Validation from Requirements to Testing

    Science.gov (United States)

    2013-06-01

    ABBREVIATIONS ANSI American National Standards Institute ASIS American Society of Industrial Security CCTV Closed Circuit Television CONOPS...is globally recognized for the development and maintenance of standards. ASTM defines a specification as an explicit set of requirements...www.rkb.us/saver/. One of the SAVER reports titled CCTV Technology Handbook has a chapter on system design. The report uses terms like functional

  4. Nutritional potassium requirement for laying Japanese quails

    Directory of Open Access Journals (Sweden)

    Fernando Guilherme Perazzo Costa

    2011-12-01

    Full Text Available The objective of this study was to evaluate the potassium requirement for laying Japanese quails. Two hundred and forty quails were distributed in a randomized block design, with five treatments and six replicates, with eight birds each. The treatments consisted of a basal diet deficient in potassium (K (2.50 g/kg, supplemented with potassium carbonate, to replace the inert, to reach levels of 2.50, 3.50, 4.50, 5.50 and 6.50 (g/kg of K in the diet. There was a quadratic effect of K levels on feed intake, egg production, egg mass and feed conversion per egg mass and per egg dozen, estimating the requirements of 4.26, 4.41, 4.38, 4.43 and 4.48 (g/kg of K diet, respectively. There was no significant effect on the levels of K in the diet on egg weight, albumen weight, percentage of yolk or shell and yolk color. However, yolk and shell weights reduced and the albumen percentage increased linearly with increasing levels of K in the diet. Despite the reduction of shell weight, the increased levels of K did not influence the specific gravity and shell thickness. The use of 4.41 g/kg of potassium is recommended in the diet for laying Japanese quails.

  5. A study on the influence of the regulatory requirements of a nuclear facility during decommissioning activities

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hee Seong; Park, Seung Kook; Park, Kook Nam; Hong, Yun Jeong; Park, Jang Jin; Choi, Jong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The preliminary decommissioning plan should be written with various chapters such as a radiological characterization, a decommissioning strategy and methods, a design for decommissioning usability, a safety evaluation, decontamination and dismantling activities, radioactive waste management, an environmental effect evaluation, and fire protection. The process requirements of the decommissioning project and the technical requirements and technical criteria should comply with regulatory requirements when dismantling of a nuclear facility. The requirements related to safety in the dismantling of a nuclear facility refer to the IAEA safety serious. The present paper indicates that a decommissioning design and plan, dismantling activities, and a decommissioning project will be influenced by the decommissioning regulatory requirements when dismantling of a nuclear facility. We hereby paved the way to find the effect of the regulatory requirements on the decommissioning of a whole area from the decommissioning strategy to the radioactive waste treatment when dismantling a nuclear facility. The decommissioning requirements have a unique feature in terms of a horizontal relationship as well as a vertical relationship from the regulation requirements to the decommissioning technical requirements. The decommissioning requirements management will be conducted through research that can recognize a multiple relationship in the next stage.

  6. PIT Coating Requirements Analysis

    International Nuclear Information System (INIS)

    MINTEER, D.J.

    2000-01-01

    This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products

  7. PIT Coating Requirements Analysis

    Energy Technology Data Exchange (ETDEWEB)

    MINTEER, D.J.

    2000-10-20

    This study identifies the applicable requirements for procurement and installation of a coating intended for tank farm valve and pump pit interior surfaces. These requirements are intended to be incorporated into project specification documents and design media. This study also evaluates previously recommended coatings and identifies requirement-compliant coating products.

  8. Information Requirements Specification II: Brainstorming Collective Decision-Making Technique.

    Science.gov (United States)

    Telem, Moshe

    1988-01-01

    Information requirements specification (IRS) constitutes an Achilles heel in the system life cycle of management information systems. This article establishes a systematic overall IRS technique applicable to organizations of all types and sizes. The technique's integration of brainstorming and theory Z principles creates an effective, stimulating,…

  9. The Force Required to Fracture Endodontically Roots Restored with ...

    African Journals Online (AJOL)

    2016-03-12

    Mar 12, 2016 ... 2017 Nigerian Journal of Clinical Practice | Published by Wolters Kluwer ‑ Medknow. Objective: To evaluate the effect of various materials as intra-orifice barriers ... resin, short fiber-reinforced composite, bulk-fill flowable composite, MTA ... composite, and glass ionomer cement increased the force required ...

  10. Waste Management System Requirement document

    International Nuclear Information System (INIS)

    1990-04-01

    This volume defines the top level technical requirements for the Monitored Retrievable Storage (MRS) facility. It is designed to be used in conjunction with Volume 1, General System Requirements. Volume 3 provides a functional description expanding the requirements allocated to the MRS facility in Volume 1 and, when appropriate, elaborates on requirements by providing associated performance criteria. Volumes 1 and 3 together convey a minimum set of requirements that must be satisfied by the final MRS facility design without unduly constraining individual design efforts. The requirements are derived from the Nuclear Waste Policy Act of 1982 (NWPA), the Nuclear Waste Policy Amendments Act of 1987 (NWPAA), the Environmental Protection Agency's (EPA) Environmental Standards for the Management and Disposal of Spent Nuclear Fuel (40 CFR 191), NRC Licensing Requirements for the Independent Storage of Spent Nuclear and High-Level Radioactive Waste (10 CFR 72), and other federal statutory and regulatory requirements, and major program policy decisions. This document sets forth specific requirements that will be fulfilled. Each subsequent level of the technical document hierarchy will be significantly more detailed and provide further guidance and definition as to how each of these requirements will be implemented in the design. Requirements appearing in Volume 3 are traceable into the MRS Design Requirements Document. Section 2 of this volume provides a functional breakdown for the MRS facility. 1 tab

  11. The Effect of Aortic Compliance on Left Ventricular Power Requirement

    Science.gov (United States)

    Pahlevan, Niema; Gharib, Morteza

    2009-11-01

    Aortic compliance depends on both geometry and mechanical properties of the aorta. Reduction in arterial compliance has been associated with aging, smoking, and multiple cardiovascular diseases. Increased stiffness of the aorta affects the wave dynamics in the aorta by increasing both pulse pressure amplitude and wave speed. We hypothesized that decreased aortic compliance leads to an increased left ventricular power requirement for a fixed cardiac output due to altered pulse pressure and pulse wave velocity. We used a computational approach using the finite element method for solid and fluid domains coupled to each other by using the direct coupling method. A nonlinear material model was used for the solid wall. The fluid flow model was considered to be Newtonian, incompressible, and laminar. The simulation was performed for a heart rate of 75 beats per minute for six different compliances while keeping the cardiac output and the peripheral resistance constant. The results show a trend towards increased left ventricular energy expenditure per cycle with decreased compliance. The relevance of these findings to clinical observations will be discussed.

  12. Residual load, renewable surplus generation and storage requirements in Germany

    International Nuclear Information System (INIS)

    Schill, Wolf-Peter

    2014-01-01

    I examine the effects of increasing amounts of fluctuating renewable energy on residual load, which is defined as the difference between actual power demand and the feed-in of non-dispatchable and inflexible generators. I draw on policy-relevant scenarios for Germany and make use of extensive sensitivity analyses. Whereas yearly renewable surplus energy is low in most scenarios analyzed, peak surplus power can become very high. Decreasing thermal must-run requirements and increasing biomass flexibility substantially reduce surpluses. I use an optimization model to determine the storage capacities required for taking up renewable surpluses. Allowing curtailment of 1% of the yearly feed-in of non-dispatchable renewables would render storage investments largely obsolete until 2032 under the assumption of a flexible power system. Further restrictions of curtailment as well as lower system flexibility strongly increase storage requirements. By 2050, at least 10 GW of storage are required for surplus integration, of which a sizeable share is seasonal storage. Results suggest that policy makers should work toward avoiding surplus generation, in particular by decreasing the must-run of thermal generators. Concerns about surpluses should not be regarded as an obstacle to further renewable expansion. The findings are also relevant for other countries that shift toward fluctuating renewables. - Highlights: • I examine the effects of fluctuating renewable energy on residual load. • Surplus energies are generally low, but there are high surplus power peaks. • Increasing the flexibility of thermal generators substantially reduces surpluses. • Allowing curtailment of 1% renders storage investments largely obsolete by 2032. • Both storage requirements and the share of seasonal storage increase by 2050

  13. Determining the essential skill requirements for construction managers' practice in Nigeria

    Directory of Open Access Journals (Sweden)

    Olabode E Ogunsanmi

    2016-12-01

    Full Text Available The study investigates the essential skill requirements for construction managers in Nigeria. The objective is to determine the most important skill requirements for construction managers. A structured questionnaire was administered to construction professionals who worked recently with construction managers in their recently completed projects. Snowballing sampling technique was used to select seventy (70 respondents, however only forty (40 responses were used for the data analysis. The results indicate that essential skills required by the construction managers for their jobs include: procedural-industrial skills, quality assurance/management, listening skills, knowledge of codes and regulations, sustainable skills and ability to learn skills. These skills are important for the construction manager to practice effectively in Nigeria and other developing countries. These findings have seven practical implications to professional bodies, Universities and other trainers of construction managers, whose present curricula may be deficient in knowledge areas in industry (business, managerial, personal and technical. These institutions may need to re-orientate and improve the curricula for newly trained construction managers to cope with current skill requirements. On the other hand, recruiting agencies should ensure that job applicants with the right hard and soft skills are engaged as construction managers. Consequently efficient and effective management of future construction projects in Nigeria and other developing countries can be ensured.

  14. An Analysis of Skill Requirements for Operators of Amphibious Air Cushion Vehicles (ACVs).

    Science.gov (United States)

    McKnight, A. James; And Others

    This report describes the skills required in the operation of an amphibious air cushion vehicle (ACV) in Army tactical and logistic missions. The research involved analyzing ACV characteristics, operating requirements, environmental effects, and results of a simulation experiment. The analysis indicates that ACV operation is complicated by an…

  15. Age differences in the required coefficient of friction during level walking do not exist when experimentally-controlling speed and step length.

    Science.gov (United States)

    Anderson, Dennis E; Franck, Christopher T; Madigan, Michael L

    2014-08-01

    The effects of gait speed and step length on the required coefficient of friction (COF) confound the investigation of age-related differences in required COF. The goals of this study were to investigate whether age differences in required COF during self-selected gait persist when experimentally-controlling speed and step length, and to determine the independent effects of speed and step length on required COF. Ten young and 10 older healthy adults performed gait trials under five gait conditions: self-selected, slow and fast speeds without controlling step length, and slow and fast speeds while controlling step length. During self-selected gait, older adults walked with shorter step lengths and exhibited a lower required COF. Older adults also exhibited a lower required COF when walking at a controlled speed without controlling step length. When both age groups walked with the same speed and step length, no age difference in required COF was found. Thus, speed and step length can have a large influence on studies investigating age-related differences in required COF. It was also found that speed and step length have independent and opposite effects on required COF, with step length having a strong positive effect on required COF, and speed having a weaker negative effect.

  16. Requirements for a Global Greenhouse Gas Information System

    Science.gov (United States)

    Duren, R.; Boland, S.; Lempert, R.; Miller, C.

    2008-12-01

    A global greenhouse gas information system will prove a critical component of any successful effort to mitigate climate change which relies on limiting the atmospheric concentration of greenhouse gases. The system will provide the situational awareness necessary to actively reduce emissions, influence land use change, and sequester carbon. The information from such a system will be subject to intense scrutiny. Therefore, an effective system must openly and transparently produce data of unassailable quality. A global greenhouse gas information system will likely require a combination of space-and air-based remote- sensing assets, ground-based measurements, carbon cycle modeling and self-reporting. The specific requirements on such a system will be shaped by the degree of international cooperation it enjoys and the needs of the policy regime it aims to support, which might range from verifying treaty obligations, to certifying the tradable permits and offsets underlying a market in greenhouse gas emission reductions, to providing a comprehensive inventory of high and low emitters that could be used by non-governmental organizations and other international actors. While some technical studies have examined particular system components in single scenarios, there remains a need for a comprehensive survey of the range of potential requirements, options, and strategies for the overall system. We have initiated such a survey and recently hosted a workshop which engaged a diverse community of stakeholders to begin synthesizing requirements for such a system, with an initial focus on carbon dioxide. In this paper we describe our plan for completing the definition of the requirements, options, and strategies for a global greenhouse gas monitoring system. We discuss our overall approach and provide a status on the initial requirements synthesis activity.

  17. Regulatory requirements for marketing fixed dose combinations

    Directory of Open Access Journals (Sweden)

    B G Jayasheel

    2010-01-01

    Full Text Available The development of fixed-dose combinations (FDCs is becoming increasingly important from a public health perspective. FDCs have advantages when there is an identifiable patient population for whom treatment with a particular combination of actives in a fixed ratio is safe and effective and when all of the actives contribute to the overall therapeutic effect. Such combinations of drugs are particularly useful in the management of chronic diseases. In addition, there can be real clinical benefits in the form of increased efficacy and/or a reduced incidence of adverse effects. Additional advantages of FDCs are potentially lower costs of manufacturing compared to the costs of producing separate products administered concurrently, simpler logistics of distribution and reduced development of resistance in the case of antimicrobials. Above all, FDC therapy reduces pill burden and improves medication compliance. Although, FDCs seem to be ideal under certain pre-defined circumstances, if a dosing adjustment is warranted, there may not be an FDC available in the most appropriate strength for the patient and if an adverse drug reaction occurs from using an FDC, it may be difficult to identify the active ingredient responsible for causing the reaction. Appendix VI of Schedule Y (Drugs & Cosmetics Rules 1945, India states the requirements for marketing approval of various types of FDCs. The same is further elaborated in this article to provide a detailed guidance including the clinical trial requirements. However, the heterogeneity of the therapeutic field makes it difficult to develop a standard guidance document.

  18. The Use of Cognitive Maps for Requirements Elicitation in Product Development

    Directory of Open Access Journals (Sweden)

    Raquel Dias

    2016-04-01

    Full Text Available This article approaches Engineering Requirements concepts and proposes the use of cognitive maps as support to the problem identification of the stakeholders during the requirements elicitation process. It presents a case study of the aerospace cluster of São José dos Campos, State of São Paulo. The cognitive map technique was developed to represent the views of the individuals, generating cognitive maps, which, in an aggregated way, express graphically the collective vision to support the decision-making process. Applied to Engineering Requirements, it has revealed the potential to promote the convergence of different points of view on the actual stakeholders’ needs in innovative fashion. This technique has demonstrated effectiveness when approaching the stated requirements early in the development process implemented throughout the life cycle of the system/product.

  19. Executive report : effects of changing HOV lane occupancy requirements : El Monte busway case study.

    Science.gov (United States)

    2002-09-01

    In 1999, the California Legislature passed Senate Bill 63, which lowered the vehicle-occupancy requirement on the El Monte Busway on the San Bernardino (I-10) Freeway from three persons per vehicle (3+) to two persons per vehicle (2+) full time. The ...

  20. An Approach for Integrating the Prioritization of Functional and Nonfunctional Requirements

    Directory of Open Access Journals (Sweden)

    Mohammad Dabbagh

    2014-01-01

    Full Text Available Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP and hybrid assessment method (HAM. Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches.

  1. An approach for integrating the prioritization of functional and nonfunctional requirements.

    Science.gov (United States)

    Dabbagh, Mohammad; Lee, Sai Peck

    2014-01-01

    Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches.

  2. Needs and accuracy requirements for fission product nuclear data in the physics design of power reactor cores

    International Nuclear Information System (INIS)

    Rowlands, J.L.

    1978-01-01

    The fission product nuclear data accuracy requirements for fast and thermal reactor core performance predictions were reviewed by Tyror at the Bologna FPND Meeting. The status of the data was assessed at the Meeting and it was concluded that the requirements of thermal reactors were largely met, and the yield data requirements of fast reactors, but not the cross section requirements, were met. However, the World Request List for Nuclear Data (WRENDA) contains a number of requests for fission product capture cross sections in the energy range of interest for thermal reactors. Recent reports indicate that the fast reactor reactivity requirements might have been met by integral measurements made in zero power critical assemblies. However, there are requests for the differential cross sections of the individual isotopes to be determined in addition to the integral data requirements. The fast reactor requirements are reviewed, taking into account some more recent studies of the effects of fission products. The sodium void reactivity effect depends on the fission product cross sections in a different way to the fission product reactivity effect in a normal core. This requirement might call for different types of measurement. There is currently an interest in high burnup fuel cycles and alternative fuel cycles. These might require more accurate fission product data, data for individual isotopes and data for capture products. Recent calculations of the time dependence of fission product reactivity effects show that this is dependent upon the data set used and there are significant uncertainties. Some recent thermal reactor studies on approximations in the treatment of decay chains and the importance of xenon and samarium poisoning are also summarized. (author)

  3. Beam heating requirements for a tokamak experimental power reactor

    International Nuclear Information System (INIS)

    Bertoncini, P.J.; Brooks, J.N.; Fasolo, J.A.; Stacey, W.M. Jr.

    1976-01-01

    Typical beam heating requirements for effective tokamak experimental power reactor (TEPR) operation have been studied in connection with the Argonne preliminary conceptual TEPR design. For an ignition level plasma (approximately 100 MWt fusion power) for the nominal case envisioned, the neutral beam is only used to heat the plasma to ignition. This typically requires a beam power output of 40 MW at 180 keV for about 3 sec with a total energy of 114 MJ supplied to the plasma. The beam requirements for an ignition device are not very sensitive to changes in wall-sputtered impurity levels or plasma resistivity. For a plasma that must be driven due to poor confinement, the beam must remain on for most of the burn cycle. For representative cases, beam powers of approximately 23 MW are required for a total on-time of 20 to 50 sec. Reqirements on power level, beam energy, on-time, and beam-generation efficiency all represent considerable advances over present technology. For the Argonne TEPR design, a total of 16 to 32 beam injectors is envisioned. For a 40-MW, 180-keV, one-component beam, each injector supplies about 7 to 14 A of neutrals to the plasma. For positive ion sources, about 50 to 100 A of ions are required per injector and some form of particle and/or energy recycling appears to be essential in order to meet the power and efficiency requirements

  4. The impact of immersion protection requirements on hair dryer electrocutions in the USA.

    Science.gov (United States)

    Rodgers, Gregory B; Garland, Sarah

    2012-12-01

    To evaluate the effectiveness of the immersion protection requirements of a voluntary safety standard for portable handheld hair dryers in preventing electrocution deaths in the USA. The present work was an interrupted time series study design. Data on annual hair dryer-related electrocution deaths resulting from water contact were developed for the 1980-2007 study period. A multivariate Poisson regression model for rate data was used to evaluate the impact of the immersion protection requirements during the post-intervention period. The analysis controlled for the estimated number of hair dryers in use and the estimated number of US homes equipped with ground fault circuit interrupters, safety devices that would address hair dryer electrocutions even in the absence of the immersion protection requirements of the voluntary standard. The implementation of the 1987 and 1991 immersion protection requirements of the voluntary standard for portable handheld hair dryers was the intervention studied. The main outcome measure was the estimated reduction in the hair dryer electrocution rate associated with the immersion protection requirements of the voluntary standard. After controlling for covariates, the immersion protection requirements were estimated to reduce the rate of hair dryer immersion electrocution deaths by 96.6% (95% CI, 90.8% to 98.8%). This suggests the prevention of about 280 immersion electrocution deaths involving hair dryers during the post-intervention period (1987-2007). The immersion protection requirements of the voluntary safety standard for hair dryers have been highly effective in reducing hair dryer electrocutions.

  5. Requirements for High Level Models Supporting Design Space Exploration in Model-based Systems Engineering

    OpenAIRE

    Haveman, Steven P.; Bonnema, G. Maarten

    2013-01-01

    Most formal models are used in detailed design and focus on a single domain. Few effective approaches exist that can effectively tie these lower level models to a high level system model during design space exploration. This complicates the validation of high level system requirements during detailed design. In this paper, we define requirements for a high level model that is firstly driven by key systems engineering challenges present in industry and secondly connects to several formal and d...

  6. Functional requirements of road lighting.

    NARCIS (Netherlands)

    Schreuder, D.A.

    1975-01-01

    The functional, technical and visual requirements for public lighting are discussed. The improvement of the presentation of information to the road user is the main functional requirement. The visual requirements can be deduced from the functional requirement of enabling drivers to follow the

  7. Antiapolipoprotein A-1 IgG chronotropic effects require nongenomic action of aldosterone on L-type calcium channels.

    Science.gov (United States)

    Rossier, Michel F; Pagano, Sabrina; Python, Magaly; Maturana, Andres D; James, Richard W; Mach, François; Roux-Lombard, Pascale; Vuilleumier, Nicolas

    2012-03-01

    Autoantibodies to apolipoprotein A-1 (antiapoA-1 IgG) have been shown to be associated with higher resting heart rate and morbidity in myocardial infarction patients and to behave as a chronotropic agent in the presence of aldosterone on isolated neonatal rat ventricular cardiomyocytes (NRVC). We aimed at identifying the pathways accounting for this aldosterone-dependent antiapoA-1 IgG-positive chronotropic effect on NRVC. The rate of regular spontaneous contractions was determined on NRVC in the presence of different steroid hormones and antagonists. AntiapoA-1 IgG chronotropic response was maximal within 20 min and observed only in aldosterone-pretreated cells but not in those exposed to other steroids. The positive antiapoA-1 IgG chronotropic effect was already significant after 5 min aldosterone preincubation, was dependent on 3-kinase and protein kinase A activities, was not inhibited by actinomycin D, and was fully abrogated by eplerenone (but not by spironolactone), demonstrating the dependence on a nongenomic action of aldosterone elicited through the mineralocorticoid receptor (MR). Under oxidative conditions (but not under normal redox state), corticosterone mimicked the permissive action of aldosterone on the antiapoA-1 IgG chronotropic response. Pharmacological and patch-clamp studies identified L-type calcium channels as crucial effectors of antiapoA-1 IgG chronotropic action, involving two converging pathways that increase the channel activity. The first one involves the rapid, nongenomic activation of the phosphatidylinositol 3-kinase enzyme by MR, and the second one requires a constitutive basal protein kinase A activity. In conclusion, our results indicate that, on NRVC, the aldosterone-dependent chronotropic effects of antiapoA-1 IgG involve the nongenomic activation of L-type calcium channels.

  8. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  9. Requirements for an energy policy

    International Nuclear Information System (INIS)

    Conant, M.A.

    1987-01-01

    The central issue facing the US today lies in the rise of oil imports. No supergiant (5 billion barrels) oil discoveries have been made in the US. Production from existing fields is declining. The 1985-86 oil price collapse from $26 to less than $15 per barrel had a disastrous effect on the budgets of smaller oil companies which do most of the exploring, and on the service industry. Budgets for overseas exploration has been generally sustained. Oil prices are not expected to sustain domestic exploration. Gulf oil sources will, in the next five years, supply some 75 percent of all oil in international trade. Without an energy policy, involvement in Middle East oil will grow exponentially, as will the needs of others for Gulf oil. The natural gas situation is different, with a spare producing capacity of one trillion cubic feet this year, which could double next year. Natural gas deregulation has created an unbelievable mess in the requirements of producers/suppliers and purchasers to have dependable business arrangements. Coal is plentiful and will be until the end of time. Public opposition to emission problems and the greenhouse effect are an obstacle to greater use of coal. The nuclear option may be dead, with no new orders since 1978. Statistics are provided on proven world reserves of conventional crude oil, recoverable heavy oils, tar sands, and shale oil; which indicates for the long term an ability to transform the Geopolitics of oil away from the middle east. Energy options require energy R ampersand D, use of Alaskan gas, conservation and efficiency in energy use, strategic reserves, close energy relations with allies, and a government-industry link which insures meeting the US oil needs from the Western Hemisphere

  10. The Management System for Facilities and Activities. Safety Requirements

    International Nuclear Information System (INIS)

    2011-01-01

    This publication establishes requirements for management systems that integrate safety, health, security, quality assurance and environmental objectives. A successful management system ensures that nuclear safety matters are not dealt with in isolation but are considered within the context of all these objectives. The aim of this publication is to assist Member States in establishing and implementing effective management systems that integrate all aspects of managing nuclear facilities and activities in a coherent manner. It details the planned and systematic actions necessary to provide adequate confidence that all these requirements are satisfied. Contents: 1. Introduction; 2. Management system; 3. Management responsibility; 4. Resource management; 5. Process implementation; 6. Measurement, assessment and improvement.

  11. Overview of contaminant arrival distributions as general evaluation requirements

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The environmental consequences of subsurface contamination problems can be completely and effectively evaluated by fulfilling the following five requirements: Determine each present or future outflow boundary of contaminated groundwater; provide the location/arrival-time distributions; provide the location/outflow-quantity distributions; provide these distributions for each individual chemical or biological constituent of environmental importance; and use the arrival distributions to determine the quantity and concentration of each contaminant that will interface with the environment as time passes. The arrival distributions on which these requirements are based provide a reference point for communication among scientists and public decision makers by enabling complicated scientific analyses to be presented as simple summary relationships

  12. Information management systems for integrating the technical data and regulatory requirements of environmental restoration activities

    International Nuclear Information System (INIS)

    Geffen, C.A.; Garrett, B.A.; Walter, M.B.

    1990-03-01

    Current environmental regulations require that comprehensive planning be conducted before remediating a hazardous waste site to characterize the nature and extent of site contamination, calculate the risk to the public, and assess the effectiveness of various remediation technologies. Remediation of Department of Energy (DOE) sites contaminated with hazardous or mixed wastes will require the effective integration of scientific and engineering data with regulatory and institutional requirements. The information management challenge presented by waste site cleanup activities goes beyond merely dealing with the large quantity of data that will be generated. The information must be stored, managed, and presented in a way that provides some consistency in approach across sites, avoids duplication of effort, and facilitates responses to requests for information from the regulators and the public. This paper provides background information on the regulatory requirements for data gathering and analysis for environmental restoration activities, and outlines the data and information management requirements for completing the pre-remediation phases of an environmental restoration project. Information management systems for integrating the regulatory and institutional requirements of the environmental restoration process with the technical data and analysis requirements are also described. 7 refs

  13. Utility requirements for fusion

    International Nuclear Information System (INIS)

    Vondrasek, R.J.

    1982-02-01

    This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability

  14. Engineering Requirements for crowds

    Directory of Open Access Journals (Sweden)

    Rogeiro Silva

    2015-12-01

    Full Text Available In the software project the interested parts are highly distributed and form numerous and heterogeneous groups, online or face, constituting what could be called crowds. The development of social applications and cloud computing and mobile has generated a marked increase in environments based requirements in crowds. Technical Requirements Engineering (RE traditional face these scalability issues, and require the co-presence of interested and engineers in joint meetings that can not be made in common physical environments. While different approaches have been introduced to partially automate RE in these contexts, still is required a multi-method approach to semi-automate all activities related to work with crowds. In this paper is propose an approach that integrates existing elicitation techniques and requirements analysis and is complemented by introducing new concepts. The information is collected through direct interaction and social collaboration, and through data mining techniques.

  15. HEP Science Network Requirements--Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Bakken, Jon; Barczyk, Artur; Blatecky, Alan; Boehnlein, Amber; Carlson, Rich; Chekanov, Sergei; Cotter, Steve; Cottrell, Les; Crawford, Glen; Crawford, Matt; Dart, Eli; Dattoria, Vince; Ernst, Michael; Fisk, Ian; Gardner, Rob; Johnston, Bill; Kent, Steve; Lammel, Stephan; Loken, Stewart; Metzger, Joe; Mount, Richard; Ndousse-Fetter, Thomas; Newman, Harvey; Schopf, Jennifer; Sekine, Yukiko; Stone, Alan; Tierney, Brian; Tull, Craig; Zurawski, Jason

    2010-04-27

    -Atlantic connectivity is more complex than network engineering for intra-US connectivity. This is because transoceanic circuits have lower reliability and longer repair times when compared with land-based circuits. Therefore, trans-Atlantic connectivity requires greater deployed bandwidth and diversity to ensure reliability and service continuity of the user-level required data transfer rates. (4) Trans-Atlantic traffic load and patterns must be monitored, and projections adjusted if necessary. There is currently a shutdown planned for the LHC in 2012 that may affect projections of trans-Atlantic bandwidth requirements. (5) There is a significant need for network tuning and troubleshooting during the establishment of new LHC Tier-2 and Tier-3 facilities. ESnet will work with the HEP community to help new sites effectively use the network. (6) SLAC is building the CCD camera for the LSST. This project will require significant bandwidth (up to 30Gbps) to NCSA over the next few years. (7) The accelerator modeling program at SLAC could require the movement of 1PB simulation data sets from the Leadership Computing Facilities at Argonne and Oak Ridge to SLAC. The data sets would need to be moved overnight, and moving 1PB in eight hours requires more than 300Gbps of throughput. This requirement is dependent on the deployment of analysis capabilities at SLAC, and is about five years away. (8) It is difficult to achieve high data transfer throughput to sites in China. Projects that need to transfer data in or out of China are encouraged to deploy test and measurement infrastructure (e.g. perfSONAR) and allow time for performance tuning.

  16. HEP Science Network Requirements. Final Report

    International Nuclear Information System (INIS)

    Dart, Eli; Tierney, Brian

    2010-01-01

    is more complex than network engineering for intra-US connectivity. This is because transoceanic circuits have lower reliability and longer repair times when compared with land-based circuits. Therefore, trans-Atlantic connectivity requires greater deployed bandwidth and diversity to ensure reliability and service continuity of the user-level required data transfer rates. (4) Trans-Atlantic traffic load and patterns must be monitored, and projections adjusted if necessary. There is currently a shutdown planned for the LHC in 2012 that may affect projections of trans-Atlantic bandwidth requirements. (5) There is a significant need for network tuning and troubleshooting during the establishment of new LHC Tier-2 and Tier-3 facilities. ESnet will work with the HEP community to help new sites effectively use the network. (6) SLAC is building the CCD camera for the LSST. This project will require significant bandwidth (up to 30Gbps) to NCSA over the next few years. (7) The accelerator modeling program at SLAC could require the movement of 1PB simulation data sets from the Leadership Computing Facilities at Argonne and Oak Ridge to SLAC. The data sets would need to be moved overnight, and moving 1PB in eight hours requires more than 300Gbps of throughput. This requirement is dependent on the deployment of analysis capabilities at SLAC, and is about five years away. (8) It is difficult to achieve high data transfer throughput to sites in China. Projects that need to transfer data in or out of China are encouraged to deploy test and measurement infrastructure (e.g. perfSONAR) and allow time for performance tuning.

  17. Energy requirements of consumption: Urban form, climatic and socio-economic factors, rebounds and their policy implications

    International Nuclear Information System (INIS)

    Wiedenhofer, Dominik; Lenzen, Manfred; Steinberger, Julia K.

    2013-01-01

    Household consumption requires energy to be used at all stages of the economic process, thereby directly and indirectly leading to environmental impacts across the entire production chain. The levels, structure and determinants of energy requirements of household consumption therefore constitute an important avenue of research. Incorporating the full upstream requirements into the analysis helps to avoid simplistic conclusions which would actually only imply shifts between consumption categories without taking the economy wide effects into account. This paper presents the investigation of the direct and indirect primary energy requirements of Australian households, contrasting urban, suburban and rural consumption patterns as well as inter- and intra-regional levels of inequality in energy requirements. Furthermore the spatial and socio-economic drivers of energy consumption for different categories of energy requirements are identified and quantified. Conclusions regarding the relationships between energy requirements, household characteristics, urban form and urbanization processes are drawn and the respective policy implications are explored. - Highlights: • We statistically analyze the energy requirements of consumption in Australia. • Contrasting urban/suburban/rural consumption patterns and spatial inequality. • Energy requirements are influenced by urban form, income and demographics. • Urban households require less direct energy, but their total consumption is higher. • Significant rebound effects can be expected when direct energy use is decreased

  18. 15 CFR 8a.125 - Effect of other requirements.

    Science.gov (United States)

    2010-01-01

    ... Order 12107, 3 CFR, 1978 Comp., p. 264; sections 704 and 855 of the Public Health Service Act (42 U.S.C. 295m, 298b-2); Title VII of the Civil Rights Act of 1964 (42 U.S.C. 2000e et seq.); the Equal Pay Act of 1963 (29 U.S.C. 206); and any other Act of Congress or Federal regulation. (b) Effect of State or...

  19. Conceptual requirements for large fusion experiment control, data, robotics, and management systems

    International Nuclear Information System (INIS)

    Gaudreau, M.P.J.; Sullivan, J.D.

    1987-05-01

    The conceptual system requirements for the control, data, robotics, and project management (CDRM) system for the next generation of fusion experiments are developed by drawing on the success of the Tara control and data system. The requirements are described in terms of an integrated but separable matrix of well-defined interfaces among the various systems and subsystems. The study stresses modularity, performance, cost effectiveness, and exportability

  20. Neutrosophy for software requirement prioritization

    Directory of Open Access Journals (Sweden)

    Ronald Barriga Dias

    2017-09-01

    Full Text Available Software engineers are involved in complex decisions that require multiples viewpoints. A specific case is the requirement prioritization process. This process is used to decide which software requirement to develop in certain release from a group of candidate requirements. Criteria involved in this process can involve indeterminacy. In this paper a software requirement prioritization model is develop based SVN numbers. Finally, an illustrative example is presented in order to show the proposed model.

  1. Establishing a health outcomes and economics center in radiology: strategies and resources required

    International Nuclear Information System (INIS)

    Medina, Santiago L.; Altman, Nolan R.

    2002-01-01

    To describe the resources and strategies required to establish a health outcomes and economics center in radiology.Methods. Human and nonhuman resources required to perform sound outcomes and economics studies in radiology are reviewed.Results. Human resources needed include skilled medical and nonmedical staff. Nonhuman resources required are: (1) communication and information network; (2) education tools and training programs; (3) budgetary strategies; and (4) sources of income. Effective utilization of these resources allows the performance of robust operational and clinical research projects in decision analysis, cost-effectiveness, diagnostic performance (sensitivity, specificity, and ROC curves), and clinical analytical and experimental studies.Conclusion. As new radiologic technology and techniques are introduced in medicine, society is increasingly demanding sound clinical studies that will determine the impact of radiologic studies on patient outcome. Health-care funding is scarce, and therefore third-party payers and hospitals are demanding more efficiency and productivity from radiologic service providers. To meet these challenges, radiology departments could establish health outcomes and economics centers to study the clinical effectiveness of imaging and its impact on patient outcome. (orig.)

  2. Fault tree construction of hybrid system requirements using qualitative formal method

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Cha, Sung-Deok

    2005-01-01

    When specifying requirements for software controlling hybrid systems and conducting safety analysis, engineers experience that requirements are often known only in qualitative terms and that existing fault tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. In this paper, we propose Causal Requirements Safety Analysis (CRSA) as a technique to qualitatively evaluate causal relationship between software faults and physical hazards. This technique, extending qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and relationship among them. Using a simplified electrical power system as an example, we describe step-by-step procedures of conducting CRSA. Our experience of applying CRSA to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates that CRSA is an effective technique in assisting safety engineers

  3. Improving Requirements Generation Thoroughness in User-Centered Workshops: The Role of Prompting and Shared User Stories

    Science.gov (United States)

    Read, Aaron

    2013-01-01

    The rise of stakeholder centered software development has led to organizations engaging users early in the development process to help define system requirements. To facilitate user involvement in the requirements elicitation process, companies can use Group Support Systems (GSS) to conduct requirements elicitation workshops. The effectiveness of…

  4. Vertical-Sensing Effectiveness and CONOPS Tool for Operational Requirements (VECTOR)

    National Research Council Canada - National Science Library

    Catantzarite, James; Green, Gary; Jacobs, Denice

    2006-01-01

    .... The Military Transformation Vision for the Department of Defense allows for an increased competitive advantage by creating future concepts of operation that will aid in the speed and effectiveness...

  5. 47 CFR 1.1312 - Facilities for which no preconstruction authorization is required.

    Science.gov (United States)

    2010-10-01

    ... environmental impact as defined in § 1.1307 of this part or is categorically excluded from environmental... significant environmental impact, the information required by § 1.1311 of this part shall be submitted by the... significant environmental effect, it shall immediately cease construction which may have that effect, and...

  6. Neutronics requirements for a DEMO fusion power plant

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, U., E-mail: ulrich.fischer@kit.edu [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Bachmann, C. [EUROfusion Consortium , Boltzmannstraße 2, 85748 Garching (Germany); Palermo, I. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Pereslavtsev, P. [Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Villari, R. [ENEA UT-FUS C.R. Frascati, Via E. Fermi 45, 00044 Frascati (Italy)

    2015-10-15

    Highlights: • Discussion and specification of neutronic requirements for a DEMO power plant. • TBR uncertainties are reviewed/discussed and design margins are elaborated. • Limits are given for radiation loads to super-conducting magnets and steel structural components. • Available DEMO results are compared to recommended limits and TBR design target. - Abstract: This paper addresses the neutronic requirements a DEMO fusion power plant needs to fulfil for a reliable and safe operation. The major requirement is to ensure Tritium self-sufficiency taking into account the various uncertainties and plant-internal losses that occur during DEMO operation. A further major requirement is to ensure sufficient protection of the superconducting magnets against the radiation penetrating in-vessel components and vessel. Reliable criteria for the radiation loads need to be defined and verified to ensure the reliable operation of the magnets over the lifetime of DEMO. Other issues include radiation induced effects on structural materials such as the accumulated displacement damage, the generation of gases such as helium which may deteriorate the material performance. The paper discusses these issues and their impact on design options for DEMO taking into account results obtained in the frame of European Power Plant Physics and Technology (PPPT) 2013 programme activities with DEMO models employing the helium cooled pebble bed (HCPB), the helium cooled lithium lead (HCLL), and the water-cooled (WCLL) blanket concepts.

  7. 76 FR 47085 - Effective Date of Requirement for Premarket Approval for a Pacemaker Programmer

    Science.gov (United States)

    2011-08-04

    ... manufacturers take action to prevent the further use of devices for which no PMA or PDP has been filed and may... completion of a product development protocol (PDP) for the class III preamendments device pacemaker... injury designed to be eliminated or reduced by requiring this device to meet the statute's approval...

  8. An ontological framework for requirement change management in distributed environment

    International Nuclear Information System (INIS)

    Khatoon, A.; Hafeez, Y.; Ali, T.

    2014-01-01

    Global Software Development (GSD) is getting fame in the software industry gradually. However, in GSD, multiple and diverse stakeholders are involved in the development of complex software systems. GSD introduces several challenges, i.e. physical distance, time zone, culture difference, language barriers. As requirements play a significant role in any software development. The greatest challenge in GSD environment is to maintain a consistent view of the system even if the requirements change. But at the same time single change in the requirement might affect several other modules. In GSD different people use terms and have different ways of expressing the concepts for which people at remote sites are unable to get uniformity regarding the semantics of the terms. In a global environment requires effective communication and coordination. However, to overcome inconsistencies and ambiguities among the team members and to make the team members aware of the consistent view, a shared and common understanding is required. In this paper an approach beneficial to software industry has been proposed, focusing on changing requirements in a Global Software Development environment. A case study has been used for the evaluation of the proposed approach. Therefore, Requirements change management process has been improved by applying the approach of the case study. The proposed approach is beneficial to the software development organizations where frequent changes occur. It guided the software industry to provide the common understandings to all the development teams residing in remote locations. (author)

  9. ORNL implementation of new health and safety requirements (DOE Order 5480.11)

    International Nuclear Information System (INIS)

    Abercrombie, J.S.

    1988-01-01

    New mandates in radiological protection outlined in DOE Order 5480. 11, include changes in the methodology for determining total radiation dose, ALARA program accountability, monitoring requirements, and standards for public entrance into controlled areas. The new order places distinct requirements concerning training at all DOE facilities. Radiation protection training requirements are addressed, including the effective communication of operations changes to all employees. This paper details the endeavors underway at ORNL in designing, developing, and delivering the training required by the new mandates. Strategies taken to reach the intended goals are explained. Efforts involve the design and implementation of the above mentioned radiation protection programs, a job-specific ALARA instructional package, and a Risk-Based Philosophy program matched to operational changes. 4 refs., 5 tabs

  10. Nuclear power technology requirements for NASA exploration missions

    International Nuclear Information System (INIS)

    Bloomfield, H.S.

    1990-01-01

    This paper discusses how future exploration of the Moon and Mars will mandate developments in many areas of technology. In particular, major advances will be required in planet surface power systems and space transportation systems. Critical nuclear technology challenges that can enable strategic self-sufficiency, acceptable operational costs and cost-effective space transportation goals for NASA exploration missions have been identified. Critical technologies for surface power systems include stationary and mobile nuclear reactor and radio-isotope heat sources coupled to static and dynamic power conversion devices. These technologies can provide dramatic reductions in mass leading to operational and transportation cost savings. Critical technologies for space transportation systems include nuclear thermal rocket and nuclear electric propulsion options which present compelling concepts for significantly reducing mass, cost or travel time required for Earth-Mars transport

  11. Stingless Bee Larvae Require Fungal Steroid to Pupate.

    Science.gov (United States)

    Paludo, Camila R; Menezes, Cristiano; Silva-Junior, Eduardo A; Vollet-Neto, Ayrton; Andrade-Dominguez, Andres; Pishchany, Gleb; Khadempour, Lily; do Nascimento, Fabio S; Currie, Cameron R; Kolter, Roberto; Clardy, Jon; Pupo, Mônica T

    2018-01-18

    The larval stage of the stingless bee Scaptotrigona depilis must consume a specific brood cell fungus in order to continue development. Here we show that this fungus is a member of the genus Zygosaccharomyces and provides essential steroid precursors to the developing bee. Insect pupation requires ecdysteroid hormones, and as insects cannot synthesize sterols de novo, they must obtain steroids in their diet. Larval in vitro culturing assays demonstrated that consuming ergosterol recapitulates the developmental effects on S. depilis as ingestion of Zygosaccharomyces sp. cells. Thus, we determined the molecular underpinning of this intimate mutualistic symbiosis. Phylogenetic analyses showed that similar cases of bee-Zygosaccharomyces symbiosis may exist. This unprecedented case of bee-fungus symbiosis driven by steroid requirement brings new perspectives regarding pollinator-microbiota interaction and preservation.

  12. A Balanced Approach to Capturing User Requirements in Business- to- Consumer Web Information Systems

    Directory of Open Access Journals (Sweden)

    M. S. Lane

    2001-11-01

    Full Text Available The development of business-to-consumer web information systems pose special challenges in the requirements analysis phase. It is difficult to capture user requirements given that users are relatively autonomous and anonymous and there are no major incentives for users to become involved in the development of a web information system. The researchers reviewed traditional requirement elicitation techniques, marketing research techniques and web usage analysis techniques. Current practice was assessed and the findings suggest that a balanced approach to user requirements capture will result in more complete and user centred requirements. This approach should lead to more effective business-to consumer web information systems.

  13. Hygiene and sanitation requirements in Danish biogas plants

    Energy Technology Data Exchange (ETDEWEB)

    Bendixen, H J

    1997-08-01

    According to Danish regulations, systematic pathogen reducing treatment is required, when industrial by-products and waste products, and urban waste, ie garbage from households and sewage sludge, are processed, before being used - without restrictions - as fertilizers on agricultural land. An adequate pathogen reducing effect (PRE) can be achieved in the digestion tanks and sanitation tanks of the biogas plants, provided they are operated correctly and respect the criteria of the official requirements. The FS-method is a microbiological indicator method based on faecal streptococci (enterococci) (FS). It may be used to check the sanitation effect achieved by the treatment in a tank. The effect is expressed numerically by the log{sub 10}-reduction of the numbers of FS measured in the biomass before and after treatment. The PRE was examined in 10 large-scale biogas plants during a period of 2-3 years. It was demonstrated that properly directed and well-functioning thermophilic digestion tanks ensure the removal of most pathogenic microorganisms from organic waste and slurry. The removal of pathogens by the treatment in mesophilic digestion tanks is incomplete. Systematic studies of the processes of inactivation of bacteria and virus in slurry and in animal tissues gave evidence that the PRE is enhanced in the microbiological environment of thermophilic digestion tanks. The sanitation criteria, ie combinations of temperature/time, for the processing of biomass in digestion tanks and sanitation tanks in biogas plants are specified. (au) 19 refs.

  14. Reuse-centric Requirements Analysis with Task Models, Scenarios, and Critical Parameters

    Directory of Open Access Journals (Sweden)

    Cyril Montabert

    2007-02-01

    Full Text Available This paper outlines a requirements-analysis process that unites task models, scenarios, and critical parameters to exploit and generate reusable knowledge at the requirements phase. Through the deployment of a critical-parameter-based approach to task modeling, the process yields the establishment of an integrative and formalized model issued from scenarios that can be used for requirements characterization. Furthermore, not only can this entity serve as interface to a knowledge repository relying on a critical-parameter-based taxonomy to support reuse but its characterization in terms of critical parameters also allows the model to constitute a broader reuse solution. We discuss our vision for a user-centric and reuse-centric approach to requirements analysis, present previous efforts implicated with this line of work, and state the revisions brought to extend the reuse potential and effectiveness of a previous iteration of a requirements tool implementing such process. Finally, the paper describes the sequence and nature of the activities involved with the conduct of our proposed requirements-analysis technique, concluding by previewing ongoing work in the field that will explore the feasibility for designers to use our approach.

  15. Pre - big bang inflation requires fine tuning

    Energy Technology Data Exchange (ETDEWEB)

    Turner, Michael S. [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Weinberg, Erick J. [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States)

    1997-10-01

    The pre-big-bang cosmology inspired by superstring theories has been suggested as an alternative to slow-roll inflation. We analyze, in both the Jordan and Einstein frames, the effect of spatial curvature on this scenario and show that too much curvature --- of either sign --- reduces the duration of the inflationary era to such an extent that the flatness and horizon problems are not solved. Hence, a fine-tuning of initial conditions is required to obtain enough inflation to solve the cosmological problems.

  16. Postmarket Requirements and Commitments

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provides information to the public on postmarket requirements and commitments. The phrase postmarket requirements and commitments refers to studies and clinical...

  17. Fuels from microalgae: Technology status, potential, and research requirements

    Energy Technology Data Exchange (ETDEWEB)

    Neenan, B.; Feinberg, D.; Hill, A.; McIntosh, R.; Terry, K.

    1986-08-01

    Although numerous options for the production of fuels from microalgae have been proposed, our analysis indicates that only two qualify for extensive development - gasoline and ester fuel. In developing the comparisons that support this conclusion, we have identified the major areas of microalgae production and processing that require extensive development. Technology success requires developing and testing processes that fully utilize the polar and nonpolar lipids produced by microalgae. Process designs used in these analyses were derived from fragmented, preliminary laboratory data. These results must be substantiated and integrated processes proposed, tested, and refined to be able to evaluate the commercial feasibility from microalgae. The production of algal feedstocks for processing to gasoline or ester fuel requires algae of high productivity and high lipid content that efficiently utilize saline waters. Species screening and development suggest that algae can achieve required standards taken individually, but algae that can meet the integrated requirements still elude researchers. Effective development of fuels from microalgae technology requires that R and D be directed toward meeting the integrated standards set out in the analysis. As technology analysts, it is inappropriate for us to dictate how the R and D effort should proceed to meet these standards. We end our role by noting that alternative approaches to meeting the feasibility targets have been identified, and it is now the task of program managers and scientists to choose the appropriate approach to assure the greatest likelihood of realizing a commercially viable technology. 70 refs., 39 figs., 35 tabs.

  18. Development of the switch requirements and architecture of a safety data communication system

    International Nuclear Information System (INIS)

    Jeong, K.I.; Lee, J.K.; Park, H.Y.; Koo, I.S.

    2004-12-01

    In accordance with digitalising the Instrumentation and Control(I and C) systems in the integral reactor, a communication network is required for effective information exchanges between the different equipment, an enhancement of the design flexibility, a simple installation and cost reduction. Generally, a communication network consists of a topology, the protocol, a communication medium, an interconnection device, etc. In this report, the development methods of switch and the architecture of a Safety Data Communication System(SDCS) are investigated and analyzed. In this report, the design requirements for switch are presented, which are the essential requirements to develop the switch in a SDCS of the SMART-P. To establish these requirements, the evaluation and analysis of the design and implementation method of the COTS switches, the architecture of SDCS and the design requirements of a SDCS were performed. At the detail design stage, these requirements will be used for the top-tier requirements, especially the design target and design basis. To develop the detail design requirements in the future, more quantitative and qualitative analyses are required. In the case of selecting the COTS switch and developing the switch, these requirements will also be used for the evaluation guide

  19. Development of the switch requirements and architecture of a safety data communication system

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, K.I.; Lee, J.K.; Park, H.Y.; Koo, I.S

    2004-12-01

    In accordance with digitalising the Instrumentation and Control(I and C) systems in the integral reactor, a communication network is required for effective information exchanges between the different equipment, an enhancement of the design flexibility, a simple installation and cost reduction. Generally, a communication network consists of a topology, the protocol, a communication medium, an interconnection device, etc. In this report, the development methods of switch and the architecture of a Safety Data Communication System(SDCS) are investigated and analyzed. In this report, the design requirements for switch are presented, which are the essential requirements to develop the switch in a SDCS of the SMART-P. To establish these requirements, the evaluation and analysis of the design and implementation method of the COTS switches, the architecture of SDCS and the design requirements of a SDCS were performed. At the detail design stage, these requirements will be used for the top-tier requirements, especially the design target and design basis. To develop the detail design requirements in the future, more quantitative and qualitative analyses are required. In the case of selecting the COTS switch and developing the switch, these requirements will also be used for the evaluation guide.

  20. Liberalization, Moral Hazard in Banking, and Prudential Regulation: Are Capital Requirements Enough?

    OpenAIRE

    Kevin C. Murdock; Thomas F. Hellmann; Joseph E. Stiglitz

    2000-01-01

    In a dynamic model of moral hazard, competition can undermine prudent bank behavior. While capital-requirement regulation can induce prudent behavior, the policy yields Pareto-inefficient outcomes. Capital requirements reduce gambling incentives by putting bank equity at risk. However, they also have a perverse effect of harming banks' franchise values, thus encouraging gambling. Pareto-efficient outcomes can be achieved by adding deposit-rate controls as a regulatory instrument, since they f...

  1. 76 FR 50481 - Announcement of Requirements and Registration for “Lifeline Facebook App Challenge”; Correction

    Science.gov (United States)

    2011-08-15

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Announcement of Requirements and Registration for ``Lifeline Facebook App Challenge''; Correction AGENCY: Office of the Assistant Secretary for Preparedness... Requirements and Registration for ``Lifeline Facebook App Challenge''. DATES: This correction is effective...

  2. The central cannabinoid CB1 receptor is required for diet-induced obesity and rimonabant's antiobesity effects in mice.

    Science.gov (United States)

    Pang, Zhen; Wu, Nancy N; Zhao, Weiguang; Chain, David C; Schaffer, Erica; Zhang, Xin; Yamdagni, Preeti; Palejwala, Vaseem A; Fan, Chunpeng; Favara, Sarah G; Dressler, Holly M; Economides, Kyriakos D; Weinstock, Daniel; Cavallo, Jean S; Naimi, Souad; Galzin, Anne-Marie; Guillot, Etienne; Pruniaux, Marie-Pierre; Tocci, Michael J; Polites, H Greg

    2011-10-01

    Cannabinoid receptor CB1 is expressed abundantly in the brain and presumably in the peripheral tissues responsible for energy metabolism. It is unclear if the antiobesity effects of rimonabant, a CB1 antagonist, are mediated through the central or the peripheral CB1 receptors. To address this question, we generated transgenic mice with central nervous system (CNS)-specific knockdown (KD) of CB1, by expressing an artificial microRNA (AMIR) under the control of the neuronal Thy1.2 promoter. In the mutant mice, CB1 expression was reduced in the brain and spinal cord, whereas no change was observed in the superior cervical ganglia (SCG), sympathetic trunk, enteric nervous system, and pancreatic ganglia. In contrast to the neuronal tissues, CB1 was undetectable in the brown adipose tissue (BAT) or the liver. Consistent with the selective loss of central CB1, agonist-induced hypothermia was attenuated in the mutant mice, but the agonist-induced delay of gastrointestinal transit (GIT), a primarily peripheral nervous system-mediated effect, was not. Compared to wild-type (WT) littermates, the mutant mice displayed reduced body weight (BW), adiposity, and feeding efficiency, and when fed a high-fat diet (HFD), showed decreased plasma insulin, leptin, cholesterol, and triglyceride levels, and elevated adiponectin levels. Furthermore, the therapeutic effects of rimonabant on food intake (FI), BW, and serum parameters were markedly reduced and correlated with the degree of CB1 KD. Thus, KD of CB1 in the CNS recapitulates the metabolic phenotype of CB1 knockout (KO) mice and diminishes rimonabant's efficacy, indicating that blockade of central CB1 is required for rimonabant's antiobesity actions.

  3. Strength development of concrete : balancing production requirements and ecological impact

    NARCIS (Netherlands)

    Onghena, S.; Grunewald, S.; Schutter, G; Jaime C., Galvez; Aguado de Cea, Antonio; Fernandez-Ordonez, David; Sakai, Koji; Reye s, Encarnación; Casati, Maria J .; Enfedaque, Alejandro; Alberti, Marcos G.; de la Fuente, Albert

    2016-01-01

    The effective production of concrete structures requires adequate control of
    strength development in order to realise the scheduled production cycles. Demoulding of elements can take place only when sufficient strength is gained and the production cycle has to be maintained with seasonal changes

  4. 40 CFR 6.201 - Coordination with other environmental review requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Coordination with other environmental review requirements. 6.201 Section 6.201 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... EFFECTS ABROAD OF EPA ACTIONS EPA's NEPA Environmental Review Procedures § 6.201 Coordination with other...

  5. 40 CFR 63.2343 - What are my requirements for emission sources not requiring control?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are my requirements for emission sources not requiring control? 63.2343 Section 63.2343 Protection of Environment ENVIRONMENTAL PROTECTION... (Non-Gasoline) What This Subpart Covers § 63.2343 What are my requirements for emission sources not...

  6. Postoperative use of non-steroidal anti-inflammatory drugs in patients with anastomotic leakage requiring reoperation after colorectal resection

    DEFF Research Database (Denmark)

    Klein, Mads; Gögenur, Ismail; Rosenberg, Jacob

    2012-01-01

    To evaluate the effect of postoperative use of non-steroidal anti-inflammatory drugs (NSAIDs) on anastomotic leakage requiring reoperation after colorectal resection.......To evaluate the effect of postoperative use of non-steroidal anti-inflammatory drugs (NSAIDs) on anastomotic leakage requiring reoperation after colorectal resection....

  7. Requirements for existing buildings

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    This report collects energy performance requirements for existing buildings in European member states by June 2012.......This report collects energy performance requirements for existing buildings in European member states by June 2012....

  8. Autonomous Real Time Requirements Tracing

    Science.gov (United States)

    Plattsmier, George; Stetson, Howard

    2014-01-01

    One of the more challenging aspects of software development is the ability to verify and validate the functional software requirements dictated by the Software Requirements Specification (SRS) and the Software Detail Design (SDD). Insuring the software has achieved the intended requirements is the responsibility of the Software Quality team and the Software Test team. The utilization of Timeliner-TLX(sup TM) Auto- Procedures for relocating ground operations positions to ISS automated on-board operations has begun the transition that would be required for manned deep space missions with minimal crew requirements. This transition also moves the auto-procedures from the procedure realm into the flight software arena and as such the operational requirements and testing will be more structured and rigorous. The autoprocedures would be required to meet NASA software standards as specified in the Software Safety Standard (NASASTD- 8719), the Software Engineering Requirements (NPR 7150), the Software Assurance Standard (NASA-STD-8739) and also the Human Rating Requirements (NPR-8705). The Autonomous Fluid Transfer System (AFTS) test-bed utilizes the Timeliner-TLX(sup TM) Language for development of autonomous command and control software. The Timeliner-TLX(sup TM) system has the unique feature of providing the current line of the statement in execution during real-time execution of the software. The feature of execution line number internal reporting unlocks the capability of monitoring the execution autonomously by use of a companion Timeliner-TLX(sup TM) sequence as the line number reporting is embedded inside the Timeliner-TLX(sup TM) execution engine. This negates I/O processing of this type data as the line number status of executing sequences is built-in as a function reference. This paper will outline the design and capabilities of the AFTS Autonomous Requirements Tracker, which traces and logs SRS requirements as they are being met during real-time execution of the

  9. Regulatory requirements for radiopharmaceutical radiochemistry and radiation dosimetry

    International Nuclear Information System (INIS)

    Bonnyman, J.

    1985-01-01

    The Australian Department of Health is responsible for ensuring that radiopharmaceuticals are safe and effective and that their use does not result in unnecessary radiation exposure. Section B1 requirements of New Drug Form 4 (NDF4) fall into the following sections - manufacture, product specifications, quality assurance testing, stability studies and expiry dating. It covers ready to inject pharmaceuticals, radioactive formulations used to prepare a radiopharmaceutical, generators and cold kits

  10. Describing and analyzing effects of international differences in food safety requirements -the case of the EU versus US-

    NARCIS (Netherlands)

    Bremmers, H.J.; Meulen, van der B.M.J.; Poppe, K.J.; Wijnands, J.H.M.

    2010-01-01

    Abstract This paper compares SPS-requirements of the USA and of the EU from the perspective of the processing establishment, and analyzes the consequences of differences for national as well as firm policies. Differences in safety requirements may impede the competitiveness of the food industry.

  11. 77 FR 13046 - Customer Due Diligence Requirements for Financial Institutions

    Science.gov (United States)

    2012-03-05

    ... industries that have anti-money laundering (AML) program requirements under FinCEN's regulations. At this... effective anti-money laundering program.\\1\\ \\1\\ See, e.g., ``Anti-Money Laundering Programs for Insurance... BSA and FinCEN's implementing regulations or guard against money laundering.\\6\\ \\2\\ The BSA is...

  12. Display Parameters and Requirements

    Science.gov (United States)

    Bahadur, Birendra

    The following sections are included: * INTRODUCTION * HUMAN FACTORS * Anthropometry * Sensory * Cognitive * Discussions * THE HUMAN VISUAL SYSTEM - CAPABILITIES AND LIMITATIONS * Cornea * Pupil and Iris * Lens * Vitreous Humor * Retina * RODS - NIGHT VISION * CONES - DAY VISION * RODS AND CONES - TWILIGHT VISION * VISUAL PIGMENTS * MACULA * BLOOD * CHOROID COAT * Visual Signal Processing * Pathways to the Brain * Spatial Vision * Temporal Vision * Colour Vision * Colour Blindness * DICHROMATISM * Protanopia * Deuteranopia * Tritanopia * ANOMALOUS TRICHROMATISM * Protanomaly * Deuteranomaly * Tritanomaly * CONE MONOCHROMATISM * ROD MONOCHROMATISM * Using Colour Effectively * COLOUR MIXTURES AND THE CHROMATICITY DIAGRAM * Colour Matching Functions and Chromaticity Co-ordinates * CIE 1931 Colour Space * CIE PRIMARIES * CIE COLOUR MATCHING FUNCTIONS AND CHROMATICITY CO-ORDINATES * METHODS FOR DETERMINING TRISTIMULUS VALUES AND COLOUR CO-ORDINATES * Spectral Power Distribution Method * Filter Method * CIE 1931 CHROMATICITY DIAGRAM * ADDITIVE COLOUR MIXTURE * CIE 1976 Chromaticity Diagram * CIE Uniform Colour Spaces and Colour Difference Formulae * CIELUV OR L*u*v* * CIELAB OR L*a*b* * CIE COLOUR DIFFERENCE FORMULAE * Colour Temperature and CIE Standard Illuminants and source * RADIOMETRIC AND PHOTOMETRIC QUANTITIES * Photopic (Vλ and Scotopic (Vλ') Luminous Efficiency Function * Photometric and Radiometric Flux * Luminous and Radiant Intensities * Incidence: Illuminance and Irradiance * Exitance or Emittance (M) * Luminance and Radiance * ERGONOMIC REQUIREMENTS OF DISPLAYS * ELECTRO-OPTICAL PARAMETERS AND REQUIREMENTS * Contrast and Contrast Ratio * Luminance and Brightness * Colour Contrast and Chromaticity * Glare * Other Aspects of Legibility * SHAPE AND SIZE OF CHARACTERS * DEFECTS AND BLEMISHES * FLICKER AND DISTORTION * ANGLE OF VIEW * Switching Speed * Threshold and Threshold Characteristic * Measurement Techniques For Electro-optical Parameters * RADIOMETRIC

  13. Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

    International Nuclear Information System (INIS)

    2016-01-01

    This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

  14. Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

    International Nuclear Information System (INIS)

    2016-01-01

    This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

  15. Leadership and Management for Safety. General Safety Requirements (French Edition)

    International Nuclear Information System (INIS)

    2016-01-01

    This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

  16. Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

  17. Context generalization in Drosophila visual learning requires the mushroom bodies

    Science.gov (United States)

    Liu, Li; Wolf, Reinhard; Ernst, Roman; Heisenberg, Martin

    1999-08-01

    The world is permanently changing. Laboratory experiments on learning and memory normally minimize this feature of reality, keeping all conditions except the conditioned and unconditioned stimuli as constant as possible. In the real world, however, animals need to extract from the universe of sensory signals the actual predictors of salient events by separating them from non-predictive stimuli (context). In principle, this can be achieved ifonly those sensory inputs that resemble the reinforcer in theirtemporal structure are taken as predictors. Here we study visual learning in the fly Drosophila melanogaster, using a flight simulator,, and show that memory retrieval is, indeed, partially context-independent. Moreover, we show that the mushroom bodies, which are required for olfactory but not visual or tactile learning, effectively support context generalization. In visual learning in Drosophila, it appears that a facilitating effect of context cues for memory retrieval is the default state, whereas making recall context-independent requires additional processing.

  18. Utility requirements for fusion power

    International Nuclear Information System (INIS)

    DeBellis, R.J.

    1977-03-01

    A four-man month study was undertaken to identify utility requirements of fusion power and define a role for the utilities in the fusion development process during the 1980s. This report, preliminary in nature, serves mainly as a planning document for future requirements analyses. A requirements organization was defined to consist of three major chronological phases: research and development, plant installation, and plant operation. Thirty-seven requirements were identified, covering all categories. In addition, training, environment, safety, licensing, and utility model were identified as five matrix-type requirements. As the requirement definition process continued during the study period, comments received from utility representatives revealed a consistency of key issues in the fusion development process. These issues form the basis for the eventual establishment of definitive roles for the utilities during the 1980s. The issues are not meant to reflect a negative view of fusion, but are items that must be solved before fusion can be introduced commercially as an electrical power source. As a result of this requirements study, preliminary candidate roles for the utilities in the fusion development process during the 1980s were identified as public education, commercialization studies, industry investment analyses, training plan implementation, alternate reactor concept development, ERDA concept design review, and requirements refinement

  19. Tokamak and RFP ignition requirements

    International Nuclear Information System (INIS)

    Werley, K.A.

    1991-01-01

    A plasma model is applied to calculate numerically transport- confinement (nτ E ) requirements and steady-state operation tokamak. The CIT tokamak and RFP ignition conditions are examined. Physics differences between RFP and tokamaks, and their consequences for a DT ignition machine, are discussed. The ignition RFP, compared to a tokamak, has many physics advantages, including ohmic heating to ignition (no need for auxiliary heating systems), higher beta, low ignition current, less sensitivity of ignition requirements to impurity effects, no hard disruptions (associated with beta or density limits), and successful operation with high radiation fractions (f RAD ∼ 0.95). These physics advantages, coupled with important engineering advantages associated with lower external magnetic fields, larger aspect ratios, and smaller plasma cross sections translate into significant cost reductions for both ignition and power reactor. The primary drawback of the RFP is the uncertainty that the present confinement scaling will extrapolate to reactor regimes. The 4-MA ZTH was expected to extend the nτ E transport scaling data three order of magnitude above ZT-40M results, and if the present scaling held, to achieve a DT-equivalent scientific energy breakeven, Q=1. A basecase RFP ignition point is identified with a plasma current of 8.1 MA and no auxiliary heating. 16 refs., 4 figs., 1 tab

  20. Creativity in Requirement Identification

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Olesen, Henning

    Traditional requirements engineering focuses mainly on analysis and elicitation. However, current trends in new system, device and software are towards involving all stakeholders in the early stages of the engineering process to define the user requirements. Creativity is here seen as a major...... keystone in this process in order to open up stakeholder's mind to new technologies, which do not yet exist. This paper dis-cusses the application of creativity in the requirements process and illustrate through cases from the MAGNET and MAGNET Beyond projects....

  1. Quality assurance requirements and description for the Civilian Radioactive Waste Management Program

    International Nuclear Information System (INIS)

    1992-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal quality assurance document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the Quality Assurance Program. The QARD contains regulatory requirements and program commitments necessary for the development of an effective quality assurance program. Quality assurance implementing documents must be based on, and consistent with, QARD requirements. The QARD applies to the following: (1) acceptance of spent nuclear fuel and high-level radioactive waste; (2) transport of spent nuclear fuel and high-level radioactive waste; (3) the Monitored Retrievable Storage (MRS) facility through application for an operating license; (4) Mined Geologic Disposal System (MGDS), including the site characterization activities (exploratory studies facility (ESF) and surface based testing), through application for an operating license; (5) the high-level-waste form from production through acceptance. Section 2.0 defines in greater detail criteria for determining work subject to QARD requirements. The QARD is organized into sections, supplements, appendices, and a glossary. The sections contain requirements that are common to all Program elements. The supplements contain requirements for specialized activities. The appendices contain requirements that are specific to an individual Program element. The glossary establishes a common vocabulary for the Quality Assurance Program

  2. 10 CFR 850 Implementation of Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S

    2012-01-05

    10 CFR 850 defines a contractor as any entity, including affiliated entities, such as a parent corporation, under contract with DOE, including a subcontractor at any tier, with responsibility for performing work at a DOE site in furtherance of a DOE mission. The Chronic Beryllium Disease Prevention Program (CBDPP) applies to beryllium-related activities that are performed at the Lawrence Livermore National Laboratory (LLNL). The CBDPP or Beryllium Safety Program is integrated into the LLNL Worker Safety and Health Program and, thus, implementation documents and responsibilities are integrated in various documents and organizational structures. Program development and management of the CBDPP is delegated to the Environment, Safety and Health (ES&H) Directorate, Worker Safety and Health Functional Area. As per 10 CFR 850, Lawrence Livermore National Security, LLC (LLNS) periodically submits a CBDPP to the National Nuclear Security Administration/Livermore Site Office (NNSA/LSO). The requirements of this plan are communicated to LLNS workers through ES&H Manual Document 14.4, 'Working Safely with Beryllium.' 10 CFR 850 is implemented by the LLNL CBDPP, which integrates the safety and health standards required by the regulation, components of the LLNL Integrated Safety Management System (ISMS), and incorporates other components of the LLNL ES&H Program. As described in the regulation, and to fully comply with the regulation, specific portions of existing programs and additional requirements are identified in the CBDPP. The CBDPP is implemented by documents that interface with the workers, principally through ES&H Manual Document 14.4. This document contains information on how the management practices prescribed by the LLNL ISMS are implemented, how beryllium hazards that are associated with LLNL work activities are controlled, and who is responsible for implementing the controls. Adherence to the requirements and processes described in the ES&H Manual ensures

  3. Guide to NRC reporting and recordkeeping requirements. Compiled from requirements in Title 10 of the U.S. Code of Federal Regulations as codified on December 31, 1993; Revision 1

    International Nuclear Information System (INIS)

    Collins, M.; Shelton, B.

    1994-07-01

    This compilation includes in the first two sections the reporting and recordkeeping requirements applicable to US Nuclear Regulatory Commission (NRC) licensees and applicants and to members of the public. It includes those requirements codified in Title 10 of the code of Federal Regulations, Chapter 1, on December 31, 1993. It also includes, in a separate section, any of those requirements that were superseded or discontinued between January 1992 and December 1993. Finally, the appendix lists mailing and delivery addresses for NRC Headquarters and Regional Offices mentioned in the compilation. The Office of Information Resources Management staff compiled this listing of reporting and recordkeeping requirements to briefly describe each in a single document primarily to help licensees readily identify the requirements. The compilation is not a substitute for the regulations, and is not intended to impose any new requirements or technical positions. It is part of NRC's continuing efforts to comply with the Paperwork Reduction Act of 1980 and the Office of Management and Budget regulations that mandate effective and efficient Federal information resources management programs

  4. Trace Metal Requirements and Interactions in Symbiodinium kawagutii

    Directory of Open Access Journals (Sweden)

    Irene B. Rodriguez

    2018-02-01

    Full Text Available Photosynthetic organisms need trace metals for various biological processes and different groups of microalgae have distinctive obligate necessities due to their respective biochemical requirements and ecological niches. We have previously shown that the dinoflagellate Symbiodinium kawagutii requires high concentrations of bioavailable Fe to achieve optimum growth. Here, we further explored the trace metal requirements of S. kawagutii with intensive focus on the effect of individual metal and its interaction with other divalent metals. We found that low Zn availability significantly decreases growth rates and results in elevated intracellular Mn, Co, Ni, and Fe quotas in the dinoflagellate. The results highlight the complex interaction among trace metals in S. kawagutii and suggest either metal replacement strategy to counter low Zn availability or enhanced uptake of other metals by non-specific divalent metal transporters. In this work, we also examined the Fe requirement of S. kawagutii using continuous cultures. We validated that 500 pM of Fe′ was sufficient to support maximum cell density during steady state growth period either at 26 or 28°C. This study shows that growth of S. kawagutii was limited by metal availability in the following order, Fe > Zn > Mn > Cu > Ni > Co. The fundamental information obtained for the free-living Symbiodinium shall provide insights into how trace metal availability, either from ambient seawater or hosts, affects growth and proliferation of symbiotic dinoflagellates and the interaction between symbiont and their hosts.

  5. Rapid quality assurance with requirements smells

    OpenAIRE

    Femmer, Henning; Méndez Fernández, Daniel; Wagner, Stefan; Eder, Sebastian

    2016-01-01

    Context: Bad requirements quality can cause expensive consequences during the software development lifecycle, especially if iterations are long and feedback comes late. Objectives: We aim at a light-weight static requirements analysis approach that allows for rapid checks immediately when requirements are written down. Method: We transfer the concept of code smells to Requirements Engineering as Requirements Smells. To evaluate the benefits and limitations, we define Requirements Smells, real...

  6. National Ignition Facility site requirements

    International Nuclear Information System (INIS)

    1996-07-01

    The Site Requirements (SR) provide bases for identification of candidate host sites for the National Ignition Facility (NIF) and for the generation of data regarding potential actual locations for the facilities. The SR supplements the NIF Functional Requirements (FR) with information needed for preparation of responses to queries for input to HQ DOE site evaluation. The queries are to include both documents and explicit requirements for the potential host site responses. The Sr includes information extracted from the NIF FR (for convenience), data based on design approaches, and needs for physical and organization infrastructure for a fully operational NIF. The FR and SR describe requirements that may require new construction or may be met by use or modification of existing facilities. The SR do not establish requirements for NIF design or construction project planning. The SR document does not constitute an element of the NIF technical baseline

  7. 42 CFR 421.110 - Requirements for approval of an agreement.

    Science.gov (United States)

    2010-10-01

    ... SERVICES (CONTINUED) MEDICARE PROGRAM MEDICARE CONTRACTING Intermediaries § 421.110 Requirements for... regulatory authorities of the State or States in which it, or any subcontractor performing some or all of its... only providers located in a single State; (5) Has acted in good faith to achieve effective cooperation...

  8. 13 CFR 107.590 - Licensee's requirement to maintain active operations.

    Science.gov (United States)

    2010-01-01

    ..., repayments, additional capital contributions, or Leverage. (2) It is necessary for you to maintain excess... than 20 percent of your Regulatory Capital; and (ii) You cannot receive additional Leverage, solely... you meet the activity requirements in effect on January 30, 1996. (2) Rule for new Licensees. If you...

  9. Managing Supplier Requirements with HSE Accounting The case of the Mechanical Engineering Company Bisma Jaya, Indonesia

    Directory of Open Access Journals (Sweden)

    Stefan Schaltegger

    2011-12-01

    the HSE performance of an Indonesian company as a response to customer audit requirements.  The company is a supplier of a large oil company and seeks for effective and efficient ways of HSE improvement. The paper unfolds benefits and limitations of narrow efficiency-oriented responses to rating systems and audits and highlights that efficiency considerations in HSE management are only partially useful and require complementing effectiveness considerations on HSE performance.

  10. Increased Protein Requirements in Female Athletes after Variable-Intensity Exercise.

    Science.gov (United States)

    Wooding, Denise J; Packer, Jeff E; Kato, Hiroyuki; West, Daniel W D; Courtney-Martin, Glenda; Pencharz, Paul B; Moore, Daniel R

    2017-11-01

    Protein requirements are primarily studied in the context of resistance or endurance exercise with little research devoted to variable-intensity intermittent exercise characteristic of many team sports. Further, female populations are underrepresented in dietary sports science studies. We aimed to determine a dietary protein requirement in active females performing variable-intensity intermittent exercise using the indicator amino acid oxidation (IAAO) method. We hypothesized that these requirements would be greater than current IAAO-derived estimates in nonactive adult males. Six females (21.2 ± 0.8 yr, 68.8 ± 4.1 kg, 47.1 ± 1.2 mL O2·kg·min; mean ± SE) completed five to seven metabolic trials during the luteal phase of the menstrual cycle. Participants performed a modified Loughborough Intermittent Shuttle Test before consuming eight hourly mixed meals providing the test protein intake (0.2-2.66 g·kg·d), 6 g·kg·d CHO and sufficient energy for resting and exercise-induced energy expenditure. Protein was provided as crystalline amino acid modeling egg protein with [C]phenylalanine as the indicator amino acid. Phenylalanine turnover (Q) was determined from urinary [C]phenylalanine enrichment. Breath CO2 excretion (FCO2) was analyzed using mixed effects biphase linear regression with the breakpoint and upper 95% confidence interval approximating the estimated average requirement and recommended dietary allowance, respectively. Protein intake had no effect on Q (68.7 ± 7.3 μmol·kg·h; mean ± SE). FCO2 displayed a robust biphase response (R = 0.66) with an estimated average requirement of 1.41 g·kg·d and recommended dietary allowance of 1.71 g·kg·d. The protein requirement estimate of 1.41 and 1.71 g·kg·d for females performing variable-intensity intermittent exercise is greater than the IAAO-derived estimates of adult males (0.93 and 1.2 g·kg·d) and at the upper range of the American College of Sports Medicine athlete recommendations (1.2-2.0 g·kg·d).

  11. Writing testable software requirements

    Energy Technology Data Exchange (ETDEWEB)

    Knirk, D. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  12. HIPAA brings new requirements, new opportunities.

    Science.gov (United States)

    Moynihan, J J; McLure, M L

    2000-03-01

    The passage of the Health Insurance Portability and Accountability Act of 1996 (HIPAA) brought with it the need for Federal rules to implement the act's simplification and cost-reduction efforts. HHS has published proposed rules related to security for the electronic transmission of health information, privacy of individually identifiable health information, transactions and code sets, and national provider and employer identifiers. Additional proposed rules will be published this year for claims attachments and health plan identifiers. Although HIPAA does not require providers to conduct business electronically, the new standards give providers the opportunity to reduce healthcare administrative costs significantly and undertake electronic commerce efficiently and cost-effectively.

  13. Utility requirements for fusion power

    International Nuclear Information System (INIS)

    DeBellis, R.J.

    1977-03-01

    A four-man-month study, jointly funded by EPRI and McDonnell Douglas Astronautics Company-EAST, was undertaken to identify the utility requirements of fusion power and define a role for the utilities in the fusion development process during the 1980's. This report, preliminary in nature, serves mainly as a planning document for future requirements analyses. A requirements organization was defined to consist of three major chronological phases: research and development, plant installation, and plant operation. Thirty-seven requirements were identified, covering all categories. In addition, training, environment, safety, licensing, and utility model were identified as five matrix-type requirements. As the requirement definition process continued during the study period, comments received from utility representatives revealed a consistency of key issues in the fusion development process. These issues form the basis for the eventual establishment of definitive roles for the utilities during the 1980's. The issues are not meant to reflect a negative view of fusion, but are items which must be solved before fusion can be introduced commercially as an electrical power source. As a result of this requirements study, preliminary candidate roles for the utilities in the fusion development process during the 1980's were identified as public education, commercialization studies, industry investment analyses, training plan implementation, alternate reactor concept development, ERDA concept design review, and requirements refinement

  14. Effects of preoperative aspirin and clopidogrel therapy on perioperative blood loss and blood transfusion requirements in patients undergoing off-pump coronary artery bypass graft surgery.

    Science.gov (United States)

    Shim, Jae Kwang; Choi, Yong Seon; Oh, Young Jun; Bang, Sou Ouk; Yoo, Kyung Jong; Kwak, Young Lan

    2007-07-01

    Preoperative exposure to clopidogrel and aspirin significantly increases postoperative bleeding in patients undergoing on-pump coronary artery bypass graft surgery. Off-pump coronary bypass grafting has been proposed as an alternative technique to attenuate postoperative bleeding associated with clopidogrel. This study aimed to determine the effects of aspirin and clopidogrel therapy on perioperative blood loss and blood transfusion requirements in off-pump coronary artery bypass grafting. One hundred six patients scheduled for off-pump coronary artery bypass grafting were divided into three groups: aspirin and clopidogrel discontinued more than 6 days before surgery (group 1, n = 35), aspirin and clopidogrel continued until 3 to 5 days before surgery (group 2, n = 51), and both medications continued within 2 days of surgery (group 3, n = 20). Thromboelastographic tracings were analyzed before induction of anesthesia. Routine coagulation profiles were measured before and after surgery. A cell salvage device was used during surgery and salvaged blood was reinfused. Chest tube drainage and blood transfusion requirement were recorded postoperatively. Patient characteristics, operative data, and thromboelastographic tracings were similar among the groups. There were significant decreases in hematocrit level and platelet count and prolongation in prothrombin time postoperatively in all groups without any intergroup differences. The amounts of perioperative blood loss and blood transfusion required were all similar among the groups. Preoperative clopidogrel and aspirin exposure even within 2 days of surgery does not increase perioperative blood loss and blood transfusion requirements in patients undergoing elective off-pump coronary artery bypass grafting.

  15. 75 FR 37712 - Automatic Dependent Surveillance-Broadcast (ADS-B) Out Performance Requirements To Support Air...

    Science.gov (United States)

    2010-06-30

    ... Performance Requirements To Support Air Traffic Control (ATC) Service; Technical Amendment AGENCY: Federal... FAA amended its regulations to add equipage requirements and performance standards for Automatic... Approval for deviation was renumbered as Sec. 21.618, effective April 14, 2010. On May 28, 2010, the FAA...

  16. Uptake of a Dashboard Designed to Give Realtime Feedback to a Sentinel Network About Key Data Required for Influenza Vaccine Effectiveness Studies.

    Science.gov (United States)

    Pathirannehelage, Sameera; Kumarapeli, Pushpa; Byford, Rachel; Yonova, Ivelina; Ferreira, Filipa; de Lusignan, Simon

    2018-01-01

    Dashboards are technologies that bringing together a range of data sources for observational or analytical purposes. We have created a customised dashboard that includes all the key data elements required for monitoring flu vaccine effectiveness (FVE). This delivers a unique dashboard for each primary care provider (general practice) providing data to the Royal College of General Practitioners (RCGP) Research and Surveillance Centre (RSC), one of the oldest European surveillance systems. These FVE studies use a test negative case control (TNCC) design. TNCC requires knowledge of practice denominator; vaccine exposure, and results of influenza virology swabs carried out to identify in an influenza-like-illness (ILI), a clinical diagnosis, really is influenza. The dashboard displays the denominator uploaded each week into the surveillance system, compared with the nationally known practice size (providing face-validity for the denominator); it identifies those exposed to the vaccine (by age group and risk category) and virology specimens taken and missed opportunities for surveillance (again by category). All sentinel practices can access in near real time (4 working days in areas) their rates of vaccine exposure and swabs conducted. Initial feedback is positive; 80% (32/40) practices responded positively.

  17. Requirements of air conditioners for office buildings. Pt. 2

    Energy Technology Data Exchange (ETDEWEB)

    Radtke, W

    1988-02-01

    Presenting numerous explanatory diagrams part two of the report deals with auxiliary ventilation systems (mechanical systems); the influence of different ventilation circuits on the air quality (particle concentration, floor and ceiling air outlets); the requirements of heating systems (dimensioning of heating systems, effects of ventilation systems on the heat demand, reduced heat demand owing to auxiliary ventilation systems); the requirements of cooling (cooling loads in office buildings, room temperatures in the case of natural cooling, auxiliary ventilation systems, and cooling by means of refrigerators, floor/ceiling cooling systems); permissible ambient air velocities (complaints about draughts). Bottom-to-top ventilation circuits were found to provide for better air qualities and lower ambient air velocities without increasing the systems' energy demand. (HWJ).

  18. Physician Requirements-1990. For Cardiology.

    Science.gov (United States)

    Tracy, Octavious; Birchette-Pierce, Cheryl

    Professional requirements for physicians specializing in cardiology were estimated to assist policymakers in developing guidelines for graduate medical education. The determination of physician requirements was based on an adjusted needs rather than a demand or utilization model. For each illness, manpower requirements were modified by the…

  19. Requirements Elicitation Problems: A Literature Analysis

    Directory of Open Access Journals (Sweden)

    Bill Davey

    2015-06-01

    Full Text Available Requirements elicitation is the process through which analysts determine the software requirements of stakeholders. Requirements elicitation is seldom well done, and an inaccurate or incomplete understanding of user requirements has led to the downfall of many software projects. This paper proposes a classification of problem types that occur in requirements elicitation. The classification has been derived from a literature analysis. Papers reporting on techniques for improving requirements elicitation practice were examined for the problem the technique was designed to address. In each classification the most recent or prominent techniques for ameliorating the problems are presented. The classification allows the requirements engineer to be sensitive to problems as they arise and the educator to structure delivery of requirements elicitation training.

  20. 33 CFR Appendix G to Part 157 - Timetables for Application of Double Hull Requirements

    Science.gov (United States)

    2010-07-01

    ... Double Hull Requirements G Appendix G to Part 157 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Application of Double Hull Requirements 1. Source. These timetables conform to 46 U.S.C. 3703a(c). 2... double hull or with a double containment system determined by the Coast Guard to be as effective as a...

  1. Estimating ISABELLE shielding requirements

    International Nuclear Information System (INIS)

    Stevens, A.J.; Thorndike, A.M.

    1976-01-01

    Estimates were made of the shielding thicknesses required at various points around the ISABELLE ring. Both hadron and muon requirements are considered. Radiation levels at the outside of the shield and at the BNL site boundary are kept at or below 1000 mrem per year and 5 mrem/year respectively. Muon requirements are based on the Wang formula for pion spectra, and the hadron requirements on the hadron cascade program CYLKAZ of Ranft. A muon shield thickness of 77 meters of sand is indicated outside the ring in one area, and hadron shields equivalent to from 2.7 to 5.6 meters in thickness of sand above the ring. The suggested safety allowance would increase these values to 86 meters and 4.0 to 7.2 meters respectively. There are many uncertainties in such estimates, but these last figures are considered to be rather conservative

  2. Range Flight Safety Requirements

    Science.gov (United States)

    Loftin, Charles E.; Hudson, Sandra M.

    2018-01-01

    The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

  3. Quantification of smoothing requirement for 3D optic flow calculation of volumetric images

    DEFF Research Database (Denmark)

    Bab-Hadiashar, Alireza; Tennakoon, Ruwan B.; de Bruijne, Marleen

    2013-01-01

    Complexities of dynamic volumetric imaging challenge the available computer vision techniques on a number of different fronts. This paper examines the relationship between the estimation accuracy and required amount of smoothness for a general solution from a robust statistics perspective. We show...... that a (surprisingly) small amount of local smoothing is required to satisfy both the necessary and sufficient conditions for accurate optic flow estimation. This notion is called 'just enough' smoothing, and its proper implementation has a profound effect on the preservation of local information in processing 3D...... dynamic scans. To demonstrate the effect of 'just enough' smoothing, a robust 3D optic flow method with quantized local smoothing is presented, and the effect of local smoothing on the accuracy of motion estimation in dynamic lung CT images is examined using both synthetic and real image sequences...

  4. Top-tier requirements for KNGR

    International Nuclear Information System (INIS)

    Sung-Jae, Ch.; Kwangho, L.; Dong Wook, J.

    1996-01-01

    In 1992, Korea Electric Power Corporation (KEPCO) has launched the next generation reactor project to develop the standard design of an advanced pressurized water reactor by 2000. This advanced reactor aims to have the sufficient capability to be a safe, environmentally sound and economical energy source for 2000's in Korea. In conjunction with the project development, the program phase I is studied and it is in the Korean Next Generation Reactor (KNGR) first phase project that the requirements of this specification called ''Top-tier'' have been established. These functional requirements are of the first importance for the design, construction and operation of a nuclear power plant. These requirements are divided into safety requirements, serious accidents control, design base requirements, definition of the system characteristics, performance, construction feasibility, economical objectives, site parameters and design processes. The ''Top-tier'' requirements are concentrated on the improvement of the safety and reliability. Safety is one of the first priorities. In particular, the requirements for the design of the next reactors generation must include the capacity to control serious accidents because when an accident occurs, the protection degree is crucial. The KNGR requirements include the existing nuclear power plants competitiveness as well as those of the coal thermal plants. Moreover, when safety is reinforced, the economic competitiveness can be assured. At the present time, a subsequent specification for the KNGR considering the bases of the domestic technology and experimenting the running. (O.M.)

  5. Important requirements for RF generators for Accelerator-Driven Transmutation Technologies (ADTT)

    International Nuclear Information System (INIS)

    Lynch, M.T.; Tallerico, P.J.; Lawrence, G.P.

    1994-01-01

    All Accelerator-Driven Transmutation applications require very large amounts of RF Power. For example, one version of a Plutonium burning system requires an 800-MeV, 80-mA, proton accelerator running at 100% duty factor. This accelerator requires approximately 110-MW of continuous RF power if one assumes only 10% reserve power for control of the accelerator fields. In fact, to minimize beam spill, the RF controls may need as much as 15 to 20% of reserve power. In addition, unlike an electron accelerator in which the beam is relativistic, a failed RF station can disturb the synchronism of the beam, possibly shutting down the entire accelerator. These issues and more lead to a set of requirements for the RF generators which are stringent, and in some cases, conflicting. In this paper, we will describe the issues and requirements, and outline a plan for RF generator development to meet the needs of the Accelerator-Driven Transmutation Technologies. The key issues which will be discussed include: operating efficiency, operating linearity, effect on the input power grid, bandwidth, gain, reliability, operating voltage, and operating current

  6. World enrichment requirements to 2005

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The primary enrichment suppliers-Eurodif, Techsnabexport, Urenco, and the US DOE - are positioning themselves to take advantage of the post - 1995 market. Overall, unfilled requirements represent about 40 percent of world requirements in the year 2000. The USA will be the primary market, as US utilities' unfilled enrichment requirements account for over 60 percent of the world's total unfilled requirements. The enrichment market is moving toward more global competition, as each supplier tries to maintain its current regional market base and then to capture additional market share in other regions

  7. Technology Requirements For a Square-Meter, Arcsecond-Resolution Telescope for X-Rays: The SMART-X Mission

    Science.gov (United States)

    Schwartz, Daniel A.; Allured, Ryan; Bookbinder, Jay; Cotroneo, Vincenzo; Forman, William; Freeman, Mark; McMuldroch, Stuart; Reid, Paul; Tananbaum, Harvey; Vikhlinin, Alexey; hide

    2014-01-01

    Addressing the astrophysical problems of the 2020's requires sub-arcsecond x-ray imaging with square meter effective area. Such requirements can be derived, for example, by considering deep x-ray surveys to find the young black holes in the early universe (large redshifts) which will grow into the first supermassive black holes. We have envisioned a mission based on adjustable x-ray optics technology, in order to achieve the required reduction of mass to collecting area for the mirrors. We are pursuing technology which effects this adjustment via thin film piezoelectric "cells" deposited directly on the non-reflecting sides of thin, slumped glass. While SMARTX will also incorporate state-of-the-art x-ray cameras, the remaining spacecraft systems have no more stringent requirements than those which are well understood and proven on the current Chandra X-ray Observatory.

  8. ANALYSIS OF REQUIREMENTS APPLICABLE TO THE PRICING SYSTEM IN THE CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Lyapin Anton Valer'evich

    2012-10-01

    Full Text Available Formation of the pricing system and underlying investment and construction activities were analyzed by the authors in their research. It is noteworthy that the pricing system has a common basis with other human systems, as it incorporates such constituents as process, people, software, etc. Correct interaction between these elements ensures conformity between the anticipated and the practical performance of the system. The basis for the effective operation of the existing system and reduction of potential risks consists in early identification and analysis of requirements set by the user. Absent of implementation of an effective requirement management process, the pattern of the system development will look chaotic and unpredictable. In the process of the data analysis, the data set is converted into a set of the user requirements describing the anticipated behavior of the system in the course of its interaction with the operating environment. The requirements of users comprise an important constituent of the system design. They affect the entire development process from the beginning to the very end. In accordance with the principles of the system engineering, the authors have identified the key pricing system parameters; their implementation assures the appropriate functionality with a view to the formation of the contract price at various stages of the life-cycle of the investment project. Analysis of the above requirements makes it possible to convert them into a technical vision of the desired product that can demonstrate the required functionality. The methodology proposed by the authors contemplates decomposition of the levels of requirements; therefore, the authors employ a three-level model that describes the expected functionality of the system. The model includes an organizational level (basic processes, participants, information flows, a methodological level (method of calculating the cost of design, construction and operation

  9. Burning daylight: balancing vitamin D requirements with sensible sun exposure.

    Science.gov (United States)

    Stalgis-Bilinski, Kellie L; Boyages, John; Salisbury, Elizabeth L; Dunstan, Colin R; Henderson, Stuart I; Talbot, Peter L

    2011-04-04

    To examine the feasibility of balancing sunlight exposure to meet vitamin D requirements with sun protection guidelines. We used standard erythemal dose and Ultraviolet Index (UVI) data for 1 June 1996 to 30 December 2005 for seven Australian cities to estimate duration of sun exposure required for fair-skinned individuals to synthesise 1000 IU (25 µg) of vitamin D, with 11% and 17% body exposure, for each season and hour of the day. Periods were classified according to whether the UVI was 60 min. Duration of sunlight exposure required to achieve 1000 IU of vitamin D synthesis. Duration of sunlight exposure required to synthesise 1000 IU of vitamin D varied by time of day, season and city. Although peak UVI periods are typically promoted as between 10 am and 3 pm, UVI was often ≥ 3 before 10 am or after 3 pm. When the UVI was sunlight exposure while avoiding its damaging effects. Physiological and geographical factors may reduce vitamin D synthesis, and supplementation may be necessary to achieve adequate vitamin D status for individuals at risk of deficiency. ©The Medical Journal of Australia 2011

  10. Use and Limitations of the Reserve Requirement Policy in Montenegro

    Directory of Open Access Journals (Sweden)

    Milošević Velibor

    2014-05-01

    Full Text Available Since reserve requirement is the only monetary policy instrument used in Montenegro, it has been subject to frequent amendments since the global crisis outbreak. The analysis of the monetary demand model showed that there is an active transmission mechanism of change in the reserve requirement rate on the deposits trend reflects on lending activity. Also, there is a significant impact of FDIs on deposits trending in the banking system, as well as the positive impact of turnover on stock exchange on the deposits and loans trend. Finally, it was found that the financial crisis has caused negative trends in loans and deposits. On the other hand, the impact of changes in the reserve requirement on the economic activity in Montenegro could not be determined. This is primarily due to the fact that the transmission mechanism of the effect of reserve requirement on economic activity is too long to be able to estimate the model that does not allow the dynamics of the independent variables. The second reason is that industrial output index is only an indirect indicator of the economic activity.

  11. The NLC Software Requirements Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Shoaee, Hamid

    2002-08-20

    We describe the software requirements and development methodology developed for the NLC control system. Given the longevity of that project, and the likely geographical distribution of the collaborating engineers, the planned requirements management process is somewhat more formal than the norm in high energy physics projects. The short term goals of the requirements process are to accurately estimate costs, to decompose the problem, and to determine likely technologies. The long term goal is to enable a smooth transition from high level functional requirements to specific subsystem and component requirements for individual programmers, and to support distributed development. The methodology covers both ends of that life cycle. It covers both the analytical and documentary tools for software engineering, and project management support. This paper introduces the methodology, which is fully described in [1].

  12. 77 FR 65831 - Polymers; exemptions from the requirement of a tolerance.

    Science.gov (United States)

    2012-10-31

    ...]-Nonylphenyl)poly(oxypropylene) Block Polymer With Poly(oxyethylene); Tolerance Exemption AGENCY: Environmental... requirement of a tolerance for residues of [alpha]-([rho]-Nonylphenyl)poly(oxypropylene) block polymer with... polymer with poly(oxyethylene) on food or feed commodities. DATES: This regulation is effective October 31...

  13. 76 FR 14562 - Federal Acquisition Regulation; Additional Requirements for Market Research

    Science.gov (United States)

    2011-03-16

    ... and small disadvantaged business, should be exempt from market research requirements because the... subcontracting opportunities for small- business concerns. Careful attention to market-research strategies is an effective method for creating contract opportunities for small- business concerns. It provides them with an...

  14. Training requirements for agro-food industry in Portugal

    OpenAIRE

    Pedro D. Gaspar; Rita Pinheiro; Cláudia Domingues; Celestino Almeida; Teresa Paiva; Carlos D. Pereira; Manuela Vaz-Velho

    2015-01-01

    Agro-food companies are aware that the technical and soft skills of their employees directly influence business performance and, consequently, improving those skills will enhance the effectiveness and efficiency of their companies. This paper presents the main results of the AgriTraining project “Training requirements for the agro-food industry". Activities in pursuit of the objectives of this project involved: (1) analysis of the training needs in the agro-food industry in Portugal; (2) anal...

  15. Occupational injury and illness recording and reporting requirements. Final rule.

    Science.gov (United States)

    2001-10-12

    The Occupational Safety and Health Administration (OSHA) is delaying the effective date of three provisions of the Occupational Injury and Illness Recording and Reporting Requirements rule published January 19, 2001 (66 FR 5916-6135) and is establishing interim criteria for recording cases of work-related hearing loss. The provisions being delayed are sections 1904.10 (a) and (b), which specify recording criteria for cases involving occupational hearing loss, section 1904.12, which defines "musculoskeletal disorder (MSD)" and requires employers to check the MSD column on the OSHA Log if an employee experiences a work-related musculoskeletal disorder, and section 1904.29(b)(7)(vi), which states that MSDs are not considered privacy concern cases. The effective date of these provisions is delayed from January 1, 2002 until January 1, 2003. OSHA will continue to evaluate sections 1904.10 and 1904.12 over the next year. OSHA is also adding a new paragraph(c) to section 1904.10, establishing criteria for recording cases of work-related hearing loss during calendar year 2002. Section 1904.10(c) codifies the enforcement policy in effect since 1991, under which employers must record work related shifts in hearing of an average of 25 dB or more at 2000, 3000 and 4000 hertz in either ear.

  16. The nature of the purpose requirement of an impermissible tax ...

    African Journals Online (AJOL)

    The nature of an inquiry into the purpose requirement of an impermissible tax avoidance arrangement can either be objective or subjective. In essence, an objective inquiry has regard to the 'effect' of an arrangement, as opposed to a subjective inquiry which has regard to the taxpayer's ipse dixit. Although the purpose ...

  17. Requirements for Ion Sources

    International Nuclear Information System (INIS)

    Scrivens, R

    2013-01-01

    Ion sources produce beams for a large variety of different physical experiments, industrial processes and medical applications. In order to characterize the beam delivered by them, a list of requirements is necessary. In this chapter the list of principal requirements is specified and definitions for them are given. (author)

  18. Entrepreneurial learning requires action

    DEFF Research Database (Denmark)

    Brink, Tove; Madsen, Svend Ole

    2014-01-01

    that is enhanced by essential large-scale industry players and other SME managers are required to create action and value in learning. An open-mindedness to new learning approaches by SME managers and an open-mindedness to multi- and cross-disciplinary collaboration with SME managers by facilitators is required....

  19. Investigation of continuous effect modifiers in a meta-analysis on higher versus lower PEEP in patients requiring mechanical ventilation--protocol of the ICEM study.

    Science.gov (United States)

    Kasenda, Benjamin; Sauerbrei, Willi; Royston, Patrick; Briel, Matthias

    2014-05-20

    Categorizing an inherently continuous predictor in prognostic analyses raises several critical methodological issues: dependence of the statistical significance on the number and position of the chosen cut-point(s), loss of statistical power, and faulty interpretation of the results if a non-linear association is incorrectly assumed to be linear. This also applies to a therapeutic context where investigators of randomized clinical trials (RCTs) are interested in interactions between treatment assignment and one or more continuous predictors. Our goal is to apply the multivariable fractional polynomial interaction (MFPI) approach to investigate interactions between continuous patient baseline variables and the allocated treatment in an individual patient data meta-analysis of three RCTs (N = 2,299) from the intensive care field. For each study, MFPI will provide a continuous treatment effect function. Functions from each of the three studies will be averaged by a novel meta-analysis approach for functions. We will plot treatment effect functions separately for each study and also the averaged function. The averaged function with a related confidence interval will provide a suitable basis to assess whether a continuous patient characteristic modifies the treatment comparison and may be relevant for clinical decision-making. The compared interventions will be a higher or lower positive end-expiratory pressure (PEEP) ventilation strategy in patients requiring mechanical ventilation. The continuous baseline variables body mass index, PaO2/FiO2, respiratory compliance, and oxygenation index will be the investigated potential effect modifiers. Clinical outcomes for this analysis will be in-hospital mortality, time to death, time to unassisted breathing, and pneumothorax. This project will be the first meta-analysis to combine continuous treatment effect functions derived by the MFPI procedure separately in each of several RCTs. Such an approach requires individual

  20. Women's opinions of legal requirements for drug testing in prenatal care.

    Science.gov (United States)

    Tucker Edmonds, Brownsyne; Mckenzie, Fatima; Austgen, MacKenzie B; Carroll, Aaron E; Meslin, Eric M

    2017-07-01

    To explore women's attitudes and perceptions regarding legal requirements for prenatal drug testing. Web-based survey of 500 US women (age 18-45) recruited from a market research survey panel. A 24-item questionnaire assessed their opinion of laws requiring doctors to routinely verbal screen and urine drug test patients during pregnancy; recommendations for consequences for positive drug tests during pregnancy; and opinion of laws requiring routine drug testing of newborns. Additional questions asked participants about the influence of such laws on their own care-seeking behaviors. Data were analyzed for associations between participant characteristics and survey responses using Pearson's chi-squared test. The majority of respondents (86%) stated they would support a law requiring verbal screening of all pregnant patients and 73% would support a law requiring universal urine drug testing in pregnancy. Fewer respondents were willing to support laws that required verbal screening or urine drug testing (68% and 61%, respectively) targeting only Medicaid recipients. Twenty-one percent of respondents indicated they would be offended if their doctors asked them about drug use and 14% indicated that mandatory drug testing would discourage prenatal care attendance. Women would be more supportive of policies requiring universal rather than targeted screening and testing for prenatal drug use. However, a noteworthy proportion of women would be discouraged from attending prenatal care - a reminder that drug testing policies may have detrimental effects on maternal child health.

  1. Development of DSRC device and communication system performance measures recommendations for DSRC OBE performance and security requirements.

    Science.gov (United States)

    2016-05-22

    This report presents recommendations for minimum DSRC device communication performance and security : requirements to ensure effective operation of the DSRC system. The team identified recommended DSRC : communications requirements aligned to use cas...

  2. 40 CFR 158.630 - Terrestrial and aquatic nontarget organisms data requirements table.

    Science.gov (United States)

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Ecological Effects § 158... partition coefficients of the pesticide and its major degradates are 0.1 of the acute LC50/EC50 values and...

  3. The minimum work required for air conditioning process

    International Nuclear Information System (INIS)

    Alhazmy, Majed M.

    2006-01-01

    This paper presents a theoretical analysis based on the second law of thermodynamics to estimate the minimum work required for the air conditioning process. The air conditioning process for hot and humid climates involves reducing air temperature and humidity. In the present analysis the inlet state is the state of the environment which has also been chosen as the dead state. The final state is the human thermal comfort fixed at 20 o C dry bulb temperature and 60% relative humidity. The general air conditioning process is represented by an equivalent path consisting of an isothermal dehumidification followed by a sensible cooling. An exergy analysis is performed on each process separately. Dehumidification is analyzed as a separation process of an ideal mixture of air and water vapor. The variations of the minimum work required for the air conditioning process with the ambient conditions is estimated and the ratio of the work needed for dehumidification to the total work needed to perform the entire process is presented. The effect of small variations in the final conditions on the minimum required work is evaluated. Tolerating a warmer or more humid final condition can be an easy solution to reduce the energy consumptions during critical load periods

  4. Tritium interactions of potential importance to fusion reactor systems: technology requirements

    International Nuclear Information System (INIS)

    Wilkes, W.R.

    1976-01-01

    The tritium technology requirements created by the controlled thermonuclear research program to develop a demonstration fusion power reactor by the year 2000 are reviewed. It is found that the majority of the technological advances which are needed to ensure adequate tritium containment in a tritium breeding power reactor need to be demonstrated on a pilot scale by approximately 1983, so that they may be incorporated into EPR-II, the second of two planned experimental power reactors. The most important advances include development of containment materials with permeabilities to tritium well below measured values for stainless steel; large scale, low inventory deuterium-tritium separation systems; and improved monitoring and assay systems. There are less critical requirements for information about the effects of tritium and helium on the mechanical properties of materials, the effects of tritium on biological systems, and data on physical and chemical properties of tritium. Substantial progress needs to be made on these problems early enough to permit possible solutions to be tested on EPR-I. In addition, major improvements in tritium handling equipment are required for EPR-I. Those technological problems for which solutions have not yet been demonstrated by EPR-II must be solved by 1989 if they are to be assured successful application in the demonstration reactor

  5. Specifying semantic information on functional requirements

    OpenAIRE

    YAO, WUPING

    2012-01-01

    Requirements engineering is a challenging process in software development projects. Requirements, in general, are documented in natural language. They often have issues related to ambiguity, completeness and consistency. How to improve the quality of requirements documentation remains a classic research topic. This research aims at improving the way of editing and documenting functional requirements. We propose a meta-model to specify the semantic information of functional requirements, and d...

  6. Competencies required for nursing telehealth activities: A Delphi-study.

    Science.gov (United States)

    van Houwelingen, Cornelis T M; Moerman, Anna H; Ettema, Roelof G A; Kort, Helianthe S M; Ten Cate, Olle

    2016-04-01

    Telehealth is viewed as a major strategy to address the increasing demand for care and a shrinking care professional population. However, most nurses are not trained or are insufficiently trained to use these technologies effectively. Therefore, the potential of telehealth fails to reach full utilization. A better understanding of nursing telehealth entrustable professional activities (NT-EPAs) and the required competencies can contribute to the development of nursing telehealth education. In a four-round Delphi-study, a panel of experts discussed which NT-EPAs are relevant for nurses and which competencies nurses need to possess to execute these activities effectively. The 51 experts, including nurses, nursing faculty, clients and technicians all familiar with telehealth, were asked to select items from a list of 52 competencies based on the literature and on a previous study. Additionally, the panelists could add competencies based on their experience in practice. The threshold used for consensus was set at 80%. Consensus was achieved on the importance of fourteen NT-EPAs, requiring one or more of the following core competencies; coaching skills, the ability to combine clinical experience with telehealth, communication skills, clinical knowledge, ethical awareness, and a supportive attitude. Each NT-EPA requires a specific set of competencies (at least ten). In total, 52 competencies were identified as essential in telehealth. Many competencies for telehealth, including clinical knowledge and communication skills, are not novel competencies. They are fundamental to nursing care as a whole and therefore are also indispensable for telehealth. Additionally, the fourteen NT-EPAs appeared to require additional subject specific competencies, such as the ability to put patients at ease when they feel insecure about using technology. The NT-EPAs and related competencies presented in this study can be used by nursing schools that are considering including or expanding

  7. Requirements management at Westinghouse Electric Company

    International Nuclear Information System (INIS)

    Gustavsson, Henrik

    2014-01-01

    Field studies and surveys made in various industry branches support the Westinghouse opinion that qualitative systems engineering and requirements management have a high value in the development of complex systems and products. Two key issues causing overspending and schedule delays in projects are underestimation of complexity and misunderstandings between the different sub-project teams. These issues often arise when a project jumps too early into detail design. Good requirements management practice before detail design helps the project teams avoid such issues. Westinghouse therefore puts great effort into requirements management. The requirements management methodology at Westinghouse rests primarily on four key cornerstones: 1 - Iterative team work when developing requirements specifications, 2 - Id number tags on requirements, 3 - Robust change routine, and 4 - Requirements Traceability Matrix. (authors)

  8. Review of orders and regulations requiring environmental protection

    International Nuclear Information System (INIS)

    Kelly, E.; Cunningham, R.; Michael, D.

    1996-01-01

    With the increased awareness of and interest in potential ecological risks associated with past, current, and future Department of Energy (DOE) activities, DOE's Defense Programs (DP) Office of Technical and Environmental Support sponsored a study to (1) evaluate the effectiveness of the current compliance-driven environmental protection and assessment efforts relative to ecological concerns; (2) explore the need for a more focused, integrated approach to address ecological impacts; and (3) identify the requirements for an integrated approach. The study explored four questions. (a) Which federal regulations and DOE orders either explicitly require ecological assessments or implicitly require them through environmental protection language? (b) What currently is being done at selected DOE facilities to implement these regulations and orders? (c) What are private sector industries doing in terms of ecological risk assessments and how do industry approaches and issues compare with those of DOE? (d) What, if anything, in addition to current efforts is needed to ensure the protection of ecological resources associated with DOE facilities, to support defensible decision making, and to improve efficiency? The results of this study are presented in a report titled open-quotes Integrated, Comprehensive Ecological Impact Assessments In Support of Department of Energy Decision Makingclose quotes. This report is a companion document to that report. This report provides a more detailed discussion of the document reviews of the relevant environmental protection regulations and current and pending DOE orders. The main goal of the document reviews was to understand existing requirements for ecological data collection and impact assessments

  9. Requirements for active resistive wall mode (RWM) feedback control

    International Nuclear Information System (INIS)

    In, Y; Kim, J S; Chu, M S; Jackson, G L; La Haye, R J; Strait, E J; Liu, Y Q; Marrelli, L; Okabayashi, M; Reimerdes, H

    2010-01-01

    The requirements for active resistive wall mode (RWM) feedback control have been systematically investigated and established using highly reproducible current-driven RWMs in ohmic discharges in DIII-D. The unambiguous evaluation of active RWM feedback control was not possible in previous RWM studies primarily due to the variability of the onset of the pressure-driven RWMs; the stability of the pressure-driven RWM is thought to be sensitive to various passive stabilization mechanisms. Both feedback control specifications and physics requirements for RWM stabilization have been clarified using the current-driven RWMs in ohmic discharges, when little or no passive stabilization effects are present. The use of derivative gain on top of proportional gain is found to be advantageous. An effective feedback control system should be equipped with a power supply with bandwidth greater than the RWM growth rate. It is beneficial to apply a feedback field that is toroidally phase-shifted from the measured RWM phase in the same direction as the plasma current. The efficacy of the RWM feedback control will ultimately be determined by the plasma fluctuations on internal diagnostics, as well as on external magnetics. The proximity of the feedback coils to the plasma appears to be an important factor in determining the effectiveness of the RWM feedback coils. It is desirable that an RWM feedback control system simultaneously handles error field correction at a low frequency, along with direct RWM feedback at a high frequency. There is an indication of the influence of a second least stable RWM, which had been theoretically predicted but never identified in experiments. A preliminary investigation based on active MHD spectroscopic measurement showed a strong plasma response around 400 Hz where the typical plasma response associated with the first least stable RWM was expected to be negligible. Present active feedback control requirements are based on a single mode assumption, so the

  10. Oxygen requirement of germinating flax seeds

    Science.gov (United States)

    Kuznetsov, Oleg A.; Hasenstein, K. H.

    2003-05-01

    Plant experiments in earth orbit are typically prepared on the ground and germinated in orbit to study gravity effects on the developing seedlings. Germination requires the breakdown of storage compounds, and this metabolism depends upon respiration, making oxygen one of the limiting factors in seed germination. In microgravity lack of run-off of excess water requires careful testing of water dispensation and oxygen availability. In preparation for a shuttle experiment (MICRO on STS-107) we studied germination and growth of flax ( Linum usitatissimum L.) seedlings in the developed hardware (Magnetic Field Chamber, MFC). We tested between four to 32 seeds per chamber (air volume = 14 mL) and after 36 h measured the root length. At 90 μl O 2 per seed (32 seeds/chamber), the germination decreased from 94 to 69%, and the root length was reduced by 20%, compared to 8 seeds per chamber. Based on the percent germination and root length obtained in controlled gas mixtures between 3.6 and 21.6% O 2 we determined the lower limit of reliable germination to be 10 vol. % O 2 at atmospheric pressure. Although the oxygen available in the MFC's can support the intended number of seeds, the data show that seed storage and microgravity-related limitations may reduce germination.

  11. The effect of using low-polluting building materials on ventilation requirements and energy use in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Wargocki, P.; Frontczak, M. (International Centre for Indoor Environment and Energy, Dept. of Mechanical Engineering, DTU, Kgs. Lyngby (DK)); Knudsen, Henrik N. (Danish Building Research Institute, Aalborg Univ., Hoersholm (DK))

    2007-07-01

    The main objective of the ongoing research project described in this paper was to study the potential for reducing energy used for ventilating buildings by using low-polluting building materials, without compromising the indoor air quality. To quantify this potential, the exposure-response relationships, i.e. the relationships between ventilation rate and perceived indoor air quality, were established for rooms furnished with different categories of polluting materials and the simulations of energy used for ventilation were carried out. The exposure-response relationships were based on a summary of data reported in the literature on exposure-response relationships for materials tested in laboratory settings in small-scale glass chambers, and in full-scale in climate chambers, test rooms or normal offices. New experiments were also considered in which the effect of using low-polluting materials on perceived air quality was examined in test rooms ventilated with different outdoor air supply rates, low-polluting materials being selected in small glass chambers. The results suggest that the exposure-response relationships vary between different building materials and that the perceived air quality can be improved considerably when polluting building materials are substituted with materials that pollute less. The preliminary energy simulations indicate that selecting low-polluting materials will result in considerable energy savings as a result of reducing the ventilation rates required to achieve acceptable indoor air quality. (au)

  12. Baseline requirements for assessment of mining impact using biological monitoring

    International Nuclear Information System (INIS)

    Humphrey, C.L.; Dostine, P.L.

    1995-01-01

    Biological monitoring programmes for environmental protection should provide for both early detection of possible adverse effects, and assessment of the ecological significance of these effects. Monitoring techniques are required that include responses sensitive to the impact, that can be subjected to rigorous statistical analysis and for which statistical power is high. Such issues in baseline research of 'what and how to measure?' and 'for how long?' have been the focus of a programme being developed to monitor and assess effects of mining operations on the essentially pristine, freshwater ecosystems of the Alligator Rivers Region (ARR) in tropical northern Australia. Application of the BACIP (Before, After, Control, Impact, Paired differences) design, utilizing a form of temporal replication, to univariate (single species) and multivariate (community) data is described. The BACIP design incorporates data from single control and impact sites. We argue for modification of the design for particular studies conducted in streams, to incorporate additional independent control sites from adjacent catchment. Inferential power, by way of (i) more confidently attributing cause to an observed change and (ii) providing information about the ecological significance of the change, will be enhanced using a modified BACIP design. In highly valued environments such as the ARR, monitoring programmes require application of statistical tests with high power to guarantee that an impact no greater than a prescribed amount has gone undetected. A minimum number of baseline years using the BACIP approach would therefore be required in order to achieve some desired level of statistical power. This paper describes the results of power analyses conducted on 2-5 years (depending upon the technique) of baseline data from streams of the ARR and discuss the implications of these results for management. 44 refs., 1 tab., 3 figs

  13. Design requirement on HYPER blanket fuel assembly

    International Nuclear Information System (INIS)

    Hwang, Woan; Lee, B. O.; Nam, C.; Ryu, W. S.; Lee, B. S.; Park, W. S.

    2000-07-01

    This document describes design requirements which are needed for designing the blanket assembly of the HYPER as design guidance. The blanket assembly of the HYPER consists of blanket fuel rods, mounting rail, spacer, upper nozzle with handling socket, bottom nozzle with mounting rail and skeleton structure. The blanket fuel rod consists of top end plug, bottom end plug with key way, blanket fuel slug, and cladding. In the assembly, the rods are in a triangular pitch array. This report contains functional requirements, performance and operational requirements, interfacing systems requirements, core restraint and interface requirements, design limits and strength requirements, system configuration and essential feature requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements for the blanket fuel assembly of the HYPER

  14. Maneuver Planning for Conjunction Risk Mitigation with Ground-track Control Requirements

    Science.gov (United States)

    McKinley, David

    2008-01-01

    The planning of conjunction Risk Mitigation Maneuvers (RMM) in the presence of ground-track control requirements is analyzed. Past RMM planning efforts on the Aqua, Aura, and Terra spacecraft have demonstrated that only small maneuvers are available when ground-track control requirements are maintained. Assuming small maneuvers, analytical expressions for the effect of a given maneuver on conjunction geometry are derived. The analytical expressions are used to generate a large trade space for initial RMM design. This trade space represents a significant improvement in initial maneuver planning over existing methods that employ high fidelity maneuver models and propagation.

  15. 40 CFR 141.70 - General requirements.

    Science.gov (United States)

    2010-07-01

    ...) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.70 General requirements. (a... regulations establish criteria under which filtration is required as a treatment technique for public water... filtration requirements in § 141.73 and the disinfection requirements in § 141.72(b). (c) Each public water...

  16. 20 CFR 655.152 - Advertising requirements.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Advertising requirements. 655.152 Section 655... Employment in the United States (H-2A Workers) Post-Acceptance Requirements § 655.152 Advertising requirements. All advertising conducted to satisfy the required recruitment activities under § 655.151 must...

  17. The people side of MRP (materiel requirements planning).

    Science.gov (United States)

    Lunn, T

    1994-05-01

    A montage of ideas and concepts have been successfully used to train and motivate people to use MRP II systems more effectively. This is important today because many companies are striving to achieve World Class Manufacturing status. Closed loop Materiel Requirements Planning (MRP) systems are an integral part of the process of continuous improvement. Successfully using a formal management planning system, such as MRP II, is a fundamental stepping stone on the path toward World Class Excellence. Included in this article are techniques that companies use to reduce lead time, simplify bills of materiel, and improve schedule adherence. These and other steps all depend on the people who use the system. The focus will be on how companies use the MRP tool more effectively.

  18. A Conserved GPG-Motif in the HIV-1 Nef Core Is Required for Principal Nef-Activities.

    Directory of Open Access Journals (Sweden)

    Marta Martínez-Bonet

    Full Text Available To find out new determinants required for Nef activity we performed a functional alanine scanning analysis along a discrete but highly conserved region at the core of HIV-1 Nef. We identified the GPG-motif, located at the 121-137 region of HIV-1 NL4.3 Nef, as a novel protein signature strictly required for the p56Lck dependent Nef-induced CD4-downregulation in T-cells. Since the Nef-GPG motif was dispensable for CD4-downregulation in HeLa-CD4 cells, Nef/AP-1 interaction and Nef-dependent effects on Tf-R trafficking, the observed effects on CD4 downregulation cannot be attributed to structure constraints or to alterations on general protein trafficking. Besides, we found that the GPG-motif was also required for Nef-dependent inhibition of ring actin re-organization upon TCR triggering and MHCI downregulation, suggesting that the GPG-motif could actively cooperate with the Nef PxxP motif for these HIV-1 Nef-related effects. Finally, we observed that the Nef-GPG motif was required for optimal infectivity of those viruses produced in T-cells. According to these findings, we propose the conserved GPG-motif in HIV-1 Nef as functional region required for HIV-1 infectivity and therefore with a potential interest for the interference of Nef activity during HIV-1 infection.

  19. ENVIRONMENTAL SPECIFICATION REQUIREMENTS

    International Nuclear Information System (INIS)

    TIFFT, S.R.

    2003-01-01

    Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all SST and DST waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm ESD implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations/Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

  20. Data Crosscutting Requirements Review

    Energy Technology Data Exchange (ETDEWEB)

    Kleese van Dam, Kerstin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shoshani, Arie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Plata, Charity [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-04-01

    In April 2013, a diverse group of researchers from the U.S. Department of Energy (DOE) scientific community assembled to assess data requirements associated with DOE-sponsored scientific facilities and large-scale experiments. Participants in the review included facilities staff, program managers, and scientific experts from the offices of Basic Energy Sciences, Biological and Environmental Research, High Energy Physics, and Advanced Scientific Computing Research. As part of the meeting, review participants discussed key issues associated with three distinct aspects of the data challenge: 1) processing, 2) management, and 3) analysis. These discussions identified commonalities and differences among the needs of varied scientific communities. They also helped to articulate gaps between current approaches and future needs, as well as the research advances that will be required to close these gaps. Moreover, the review provided a rare opportunity for experts from across the Office of Science to learn about their collective expertise, challenges, and opportunities. The "Data Crosscutting Requirements Review" generated specific findings and recommendations for addressing large-scale data crosscutting requirements.

  1. 46 CFR 11.707 - Examination requirements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Examination requirements. 11.707 Section 11.707 Shipping... OFFICER ENDORSEMENTS Professional Requirements for Pilots § 11.707 Examination requirements. (a) An... required to pass the examination described in subpart I of this part. (b) An applicant for an extension of...

  2. 21 CFR 1304.11 - Inventory requirements.

    Science.gov (United States)

    2010-04-01

    ... the inventory of the registered location to which they are subject to control or to which the person... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Inventory requirements. 1304.11 Section 1304.11... REGISTRANTS Inventory Requirements § 1304.11 Inventory requirements. (a) General requirements. Each inventory...

  3. Level of Understanding and Requirement of Education of Patients on Radiotherapy

    International Nuclear Information System (INIS)

    Kang, Soo Man; Lee, Choul Soo

    2006-01-01

    The purpose of this study is to understand preliminary education. Level of understanding and the degrees of educational requirement for cancer patients on radiotherapy and to present the preliminary data to development of effective and practical patients treatment programs. Based on the above mentioned results of this study. Relationship between degrees of knowledge and demand for educational requirement for patients who are undertaking radiotherapy could be varied with different factors such as educational background, ages, regions of treatment, experience of symptoms. In general, patients do not have enough information, on the other hand, have very high demand for educational requirement. Customized education patients by patients would not be possible in reality. However, if we could provide standard for patients and establish systematic sessions during treatment based on this study, more and better patients satisfaction and results of treatments could be achieved.

  4. Trade-Off Analysis between Concerns Based on Aspect-Oriented Requirements Engineering

    Science.gov (United States)

    Laurito, Abelyn Methanie R.; Takada, Shingo

    The identification of functional and non-functional concerns is an important activity during requirements analysis. However, there may be conflicts between the identified concerns, and they must be discovered and resolved through trade-off analysis. Aspect-Oriented Requirements Engineering (AORE) has trade-off analysis as one of its goals, but most AORE approaches do not actually offer support for trade-off analysis; they focus on describing concerns and generating their composition. This paper proposes an approach for trade-off analysis based on AORE using use cases and the Requirements Conflict Matrix (RCM) to represent compositions. RCM shows the positive or negative effect of non-functional concerns over use cases and other non-functional concerns. Our approach is implemented within a tool called E-UCEd (Extended Use Case Editor). We also show the results of evaluating our tool.

  5. Beyond ADA Accessibility Requirements: Meeting Seniors' Needs for Toilet Transfers.

    Science.gov (United States)

    Lee, Su Jin; Sanford, Jon; Calkins, Margaret; Melgen, Sarah; Endicott, Sarah; Phillips, Anjanette

    2018-04-01

    To identify the optimal spatial and dimensional requirements of grab bars that support independent and assisted transfers by older adults and their care providers. Although research has demonstrated that toilet grab bars based on the Americans with Disabilities Act (ADA) Accessibility Standards do not meet the needs of older adults, the specific dimensional requirements for alternative configurations are unknown. A two-phased study with older adults and care providers in residential facilities was conducted to determine the optimal requirements for grab bars. Seniors and caregivers in skilled nursing facilities performed transfers using a mock-up toilet. In Phase 1, participants evaluated three grab bar configurations to identify optimal characteristics for safety, ease of use, comfort, and helpfulness. These characteristics were then validated for using ability-matched samples in Phase 2. The optimal configuration derived in Phase 1 included fold-down grab bars on both sides of the toilet (14" from centerline [CL] of toilet, 32" above the floor, and extended a minimum of 6" in front of the toilet) with one side open and a sidewall 24" from CL of toilet on the other. Phase 2 feedback was significantly positive for independent and one-person transfers and somewhat lower, albeit still positive, for two-person transfers. The study provides substantial evidence that bilateral grab bars are significantly more effective than those that comply with current ADA Accessibility Standards. Findings provide specific spatial and dimensional attributes for grab bar configurations that would be most effective in senior facilities.

  6. A hierarchical modeling methodology for the definition and selection of requirements

    Science.gov (United States)

    Dufresne, Stephane

    This dissertation describes the development of a requirements analysis methodology that takes into account the concept of operations and the hierarchical decomposition of aerospace systems. At the core of the methodology, the Analytic Network Process (ANP) is used to ensure the traceability between the qualitative and quantitative information present in the hierarchical model. The proposed methodology is implemented to the requirements definition of a hurricane tracker Unmanned Aerial Vehicle. Three research objectives are identified in this work; (1) improve the requirements mapping process by matching the stakeholder expectations with the concept of operations, systems and available resources; (2) reduce the epistemic uncertainty surrounding the requirements and requirements mapping; and (3) improve the requirements down-selection process by taking into account the level of importance of the criteria and the available resources. Several challenges are associated with the identification and definition of requirements. The complexity of the system implies that a large number of requirements are needed to define the systems. These requirements are defined early in the conceptual design, where the level of knowledge is relatively low and the level of uncertainty is large. The proposed methodology intends to increase the level of knowledge and reduce the level of uncertainty by guiding the design team through a structured process. To address these challenges, a new methodology is created to flow-down the requirements from the stakeholder expectations to the systems alternatives. A taxonomy of requirements is created to classify the information gathered during the problem definition. Subsequently, the operational and systems functions and measures of effectiveness are integrated to a hierarchical model to allow the traceability of the information. Monte Carlo methods are used to evaluate the variations of the hierarchical model elements and consequently reduce the

  7. Non-functional Avionics Requirements

    Science.gov (United States)

    Paulitsch, Michael; Ruess, Harald; Sorea, Maria

    Embedded systems in aerospace become more and more integrated in order to reduce weight, volume/size, and power of hardware for more fuel-effi ciency. Such integration tendencies change architectural approaches of system ar chi tec tures, which subsequently change non-functional requirements for plat forms. This paper provides some insight into state-of-the-practice of non-func tional requirements for developing ultra-critical embedded systems in the aero space industry, including recent changes and trends. In particular, formal requi re ment capture and formal analysis of non-functional requirements of avionic systems - including hard-real time, fault-tolerance, reliability, and per for mance - are exemplified by means of recent developments in SAL and HiLiTE.

  8. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 2

    International Nuclear Information System (INIS)

    1994-04-01

    The Quality Assurance Functional Area Requirements Identification Document (RID), addresses the programmatic requirements that ensure risks and environmental impacts are minimized, ensure safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the Tank Farm Facility and its operation. This RID incorporates guidance intended to provide Tank Farms management with the necessary requirements information to develop, upgrade, or assess the effectiveness of a Quality Assurance Program in the performance of organizational and functional activities. Quality Assurance is defined as all those planned and systematic actions necessary to provide adequate confidence that a facility, structure, system, or component will perform satisfactorily and safely in service. This document will provide the specific requirements to meet DNFSB recommendations and the guidance provided in DOE Order 5700.6C, utilizing industry codes, standards, regulatory guidelines, and industry good practices that have proven to be essential elements for an effective and efficient Quality Assurance Program as the nuclear industry has matured over the last thirty years

  9. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Quality Assurance Functional Area Requirements Identification Document (RID), addresses the programmatic requirements that ensure risks and environmental impacts are minimized, ensure safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the Tank Farm Facility and its operation. This RID incorporates guidance intended to provide Tank Farms management with the necessary requirements information to develop, upgrade, or assess the effectiveness of a Quality Assurance Program in the performance of organizational and functional activities. Quality Assurance is defined as all those planned and systematic actions necessary to provide adequate confidence that a facility, structure, system, or component will perform satisfactorily and safely in service. This document will provide the specific requirements to meet DNFSB recommendations and the guidance provided in DOE Order 5700.6C, utilizing industry codes, standards, regulatory guidelines, and industry good practices that have proven to be essential elements for an effective and efficient Quality Assurance Program as the nuclear industry has matured over the last thirty years.

  10. Requirements for Participatory Framework on Governmental Policy Level

    Directory of Open Access Journals (Sweden)

    Birutė PITRĖNAITĖ

    2012-06-01

    Full Text Available The article seeks to specify the requirements of the framework for public participation in policy making on the governmental level aiming to elaborate a substantial content of the participatory policy. The research methodology engages both qualitative and quantitative approaches based on document analysis and interviews. We analysed a range of documents, issued by the Ministry of Education and Science of the Republic of Lithuania, where participatory groups are nominated for the annual terms of 2007 and 2010. Results of the research testify that, notwithstanding the considerable number of participatory facts, public administrators hold more than a half of the places in the participatory groups. Stakeholders other than public administrators are considered to be rather consultants than partners in policy development. We suggest that for a substantial, effective and efficient participation framework, several requirements should be met including a correct arena for stakes’ expression; completeness of the stake representation; balanced stake representation; sensitivity to research based evidence; monitoring and evaluation of participation quality.

  11. Basic Requirements for Systems Software Research and Development

    Science.gov (United States)

    Kuszmaul, Chris; Nitzberg, Bill

    1996-01-01

    Our success over the past ten years evaluating and developing advanced computing technologies has been due to a simple research and development (R/D) model. Our model has three phases: (a) evaluating the state-of-the-art, (b) identifying problems and creating innovations, and (c) developing solutions, improving the state- of-the-art. This cycle has four basic requirements: a large production testbed with real users, a diverse collection of state-of-the-art hardware, facilities for evalua- tion of emerging technologies and development of innovations, and control over system management on these testbeds. Future research will be irrelevant and future products will not work if any of these requirements is eliminated. In order to retain our effectiveness, the numerical aerospace simulator (NAS) must replace out-of-date production testbeds in as timely a fashion as possible, and cannot afford to ignore innovative designs such as new distributed shared memory machines, clustered commodity-based computers, and multi-threaded architectures.

  12. Defining Antimicrobial Textile Requirements for Military Applications - A Gap Analysis

    Science.gov (United States)

    2016-05-09

    yard of fabric for the ACU. The antimicrobial added to the Fire - Resistant Environmental Ensemble (FREE) socks increased cost about $2 per pair...There were also very little conclusive laboratory and field test data on the effectiveness, risks, and potential for bacterial resistance of use of...RISK ANALYSIS LABORATORY TESTS TEST AND EVALUATION FABRICS BODY ODOR REQUIREMENTS FUNGAL INFECTIONS

  13. Changing the Price of Marriage: Evidence from Blood Test Requirements

    Science.gov (United States)

    Buckles, Kasey; Guldi, Melanie; Price, Joseph

    2011-01-01

    We use state repeals of blood test requirements (BTRs) for a marriage license that occurred between 1980 and 2008 to examine the impact of changes in the price of marriage on the marriage decision. Using a within-group estimator that holds constant state and year effects and exploits variation in the repeal dates of BTRs across states, we find…

  14. Advanced Scientific Computing Research Network Requirements: ASCR Network Requirements Review Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, Charles [Argonne National Lab. (ANL), Argonne, IL (United States); Bell, Greg [ESnet, Berkeley, CA (United States); Canon, Shane [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dart, Eli [ESnet, Berkeley, CA (United States); Dattoria, Vince [Dept. of Energy (DOE), Washington DC (United States). Office of Science. Advanced Scientific Computing Research (ASCR); Goodwin, Dave [Dept. of Energy (DOE), Washington DC (United States). Office of Science. Advanced Scientific Computing Research (ASCR); Lee, Jason [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hicks, Susan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Holohan, Ed [Argonne National Lab. (ANL), Argonne, IL (United States); Klasky, Scott [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lauzon, Carolyn [Dept. of Energy (DOE), Washington DC (United States). Office of Science. Advanced Scientific Computing Research (ASCR); Rogers, Jim [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shipman, Galen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Skinner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tierney, Brian [ESnet, Berkeley, CA (United States)

    2013-03-08

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In October 2012, ESnet and the Office of Advanced Scientific Computing Research (ASCR) of the DOE SC organized a review to characterize the networking requirements of the programs funded by the ASCR program office. The requirements identified at the review are summarized in the Findings section, and are described in more detail in the body of the report.

  15. Four Reference Models for Transparency Requirements in Information Systems

    OpenAIRE

    Hosseini, Mahmoud; Shahri, Alimohammad; Phalp, Keith T.; Ali, Ra

    2017-01-01

    Transparency is a key emerging requirement in modern businesses and their information systems. Transparency refers to the information which flows amongst stakeholders for the purpose of informed decision-making and taking the right action. Transparency is generally associated with positive connotations such as trust and accountability. However, it has been shown that it could have adverse effects such as information overload and affecting decisions objectiveness. This calls for systematic app...

  16. Design requirements for the new reactor

    International Nuclear Information System (INIS)

    Koski, S.

    2005-01-01

    This presentation deals with the safety related design requirements specified for the new nuclear power plant to be built in Finland (FINS). The legislation, codes and standards, on which the design requirements are based, can be arranged into a hierarchical pyramid as follows: The safety related design criteria are based on the three uppermost hierarchical levels: Finnish legislation (e.g. decisions of the State Council) Basic Regulations (75-INSAG-3, USNRC General Design Criteria) Process oriented nuclear documents (YVL- guides or corresponding US/German rules). The European Utility Requirements (EUR) document was used as the starting point for the writing of the design requirements document. The structure and headlines of EUR could be kept, but in many cases the contents had to be deleted and rewritten to correspond to the requirement level of the above codes and standards. This was the case, for example, with the requirements concerning safety classification or application of failure criteria. In the presentation, the most important safety related design criteria are reviewed, with an emphasis on those requirements which exceed the requirement level applied on the existing plant units. Some hints are also given on the main differences between Finnish and international safety requirements. (orig.)

  17. Proposal for elicitation and analysis of environmental requirements into the construction design process: a case study

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2010-05-01

    Full Text Available Proposal: As new demands from sustainable development, environmental requirements arise as another challenge to design process management. It is already known that companies which design buildings are usually exposed to many managerial difficulties. Faced to the environmental demands, these companies require new facilities to align environmental requirements to the business goals and to include them properly in design process. This paper is based on a case study in a construction company, which was developed through interviews and document analysis. It is intended to present a procedure for the project environmental requirements elicitation, organization and analysis, which is based on the requirements engineering (ER concepts. As results it was concluded that the ER concepts are useful for the environmental requirements integration into the design process and that strategic planning should give directions for the effective environmental requirements adherence. Moreover, a procedure for environmental requirements modeling is proposed. Key-words: Design process, Requirements management, Environmental requirements, Construction

  18. Capital Requirements and Credit Rationing

    OpenAIRE

    Itai Agur

    2010-01-01

    This paper analyzes the trade-off between financial stability and credit rationing that arises when increasing capital requirements. It extends the Stiglitz-Weiss model of credit rationing to allow for bank default. Bank capital structure then matters for lending incentives. With default and rationing endogenous, optimal capital requirements can be analyzed. Introducing bank financiers, the paper also shows that uninsured funding raises the sensitivity of rationing to capital requirements. In...

  19. Requirements for high level models supporting design space exploration in model-based systems engineering

    NARCIS (Netherlands)

    Haveman, Steven; Bonnema, Gerrit Maarten

    2013-01-01

    Most formal models are used in detailed design and focus on a single domain. Few effective approaches exist that can effectively tie these lower level models to a high level system model during design space exploration. This complicates the validation of high level system requirements during

  20. 78 FR 32152 - Guar Hydroxypropyltrimethylammo-nium Chloride; Exemption From the Requirement of a Tolerance

    Science.gov (United States)

    2013-05-29

    .../kg, 900 mg/kg, and 600 mg/kg, respectively. In addition, no effects on parental fertility, fetal..., Drug, and Cosmetic Act (FFDCA), requesting establishment of an exemption from the requirement of a... nature of the adverse effects caused by guar hydroxypropyltrimethylammonium chloride as well as the no...

  1. Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meuwisse, C; Despujols, A [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

    1999-12-31

    The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

  2. Cost-effectiveness of combustion turbines: recommendations for reliability, maintainability, supportability and maintenance requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meuwisse, C.; Despujols, A. [Electricite de France, Research and Development Division, Chatou (France); Givaudan, B. [Electricite de France, Research and Development Division - SEPTEN, Villeurbanne (France); Lafage, L. [Electricite de France, Engineering and Construction Division - CNET, Paris (France)

    1998-12-31

    The profitability of combustion turbines intended for export is of extreme importance for Electricite de France. It is principally during the development phase of a project that one can ensure resect of two indissociable factors, essential to the per-kWh production cost: global operating costs and performance in terms of reliability and availability. The approach proposed here advocates the global acquisition of the installation and its logistic support. Generally applicable recommendations are given. They enable integrating in the future plant specifications all requirements relative to plant reliability, availability, maintainability and logistic support. They are structured according to type: expression of needs and management factors. (orig.) 4 refs.

  3. General lighting requirements for photosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, D.R. [Univ. of Dayton, OH (United States)

    1994-12-31

    A review of the general lighting requirements for photosynthesis reveals that four aspects of light are important: irradiance, quality, timing and duration. These properties of light affect photosynthesis by providing the energy that drives carbon assimilation as well as by exerting control over physiology, structure and morphology of plants. Irradiance, expressed as energy flux, W m{sup -2}, or photon irradiance, {mu}mol m{sup -2} s{sup -1}, determines the rate at which energy is being delivered to the photosynthetic reaction centers. Spectral quality, the wavelength composition of light, is important because photons differ in their probability of being absorbed by the light harvesting complex and hence their ability to drive carbon assimilation. Also the various light receptors for light-mediated regulation of plant form and physiology have characteristic absorption spectra and hence photons differ in their effectiveness for eliciting responses. Duration is important because both carbon assimilation and regulation are affected by the total energy or integrated irradiance delivered during a given period. Many processes associated with photosynthesis are time-dependent, increasing or decreasing with duration. Timing is important because the effectiveness of light in the regulation of plant processes varies with the phase of the diumal cycle as determined by the plant`s time-measuring mechanisms.

  4. Balance of Plant Requirements for a Nuclear Hydrogen Plant

    Energy Technology Data Exchange (ETDEWEB)

    Bradley Ward

    2006-04-01

    This document describes the requirements for the components and systems that support the hydrogen production portion of a 600 megawatt thermal (MWt) Next Generation Nuclear Plant (NGNP). These systems, defined as the "balance-of-plant" (BOP), are essential to operate an effective hydrogen production plant. Examples of BOP items are: heat recovery and heat rejection equipment, process material transport systems (pumps, valves, piping, etc.), control systems, safety systems, waste collection and disposal systems, maintenance and repair equipment, heating, ventilation, and air conditioning (HVAC), electrical supply and distribution, and others. The requirements in this document are applicable to the two hydrogen production processes currently under consideration in the DOE Nuclear Hydrogen Initiative. These processes are the sulfur iodide (S-I) process and the high temperature electrolysis (HTE) process. At present, the other two hydrogen production process - the hybrid sulfur-iodide electrolytic process (SE) and the calcium-bromide process (Ca-Br) -are under flow sheet development and not included in this report. While some features of the balance-of-plant requirements are common to all hydrogen production processes, some details will apply only to the specific needs of individual processes.

  5. Growth conditions determine the DNF2 requirement for symbiosis.

    Directory of Open Access Journals (Sweden)

    Fathi Berrabah

    Full Text Available Rhizobia and legumes are able to interact in a symbiotic way leading to the development of root nodules. Within nodules, rhizobia fix nitrogen for the benefit of the plant. These interactions are efficient because spectacularly high densities of nitrogen fixing rhizobia are maintained in the plant cells. DNF2, a Medicago truncatula gene has been described as required for nitrogen fixation, bacteroid's persistence and to prevent defense-like reactions in the nodules. This manuscript shows that a Rhizobium mutant unable to differentiate is not sufficient to trigger defense-like reactions in this organ. Furthermore, we show that the requirement of DNF2 for effective symbiosis can be overcome by permissive growth conditions. The dnf2 knockout mutants grown in vitro on agarose or Phytagel as gelling agents are able to produce nodules fixing nitrogen with the same efficiency as the wild-type. However, when agarose medium is supplemented with the plant defense elicitor ulvan, the dnf2 mutant recovers the fix- phenotype. Together, our data show that plant growth conditions impact the gene requirement for symbiotic nitrogen fixation and suggest that they influence the symbiotic suppression of defense reactions in nodules.

  6. Design requirements for new nuclear reactor facilities in Canada

    International Nuclear Information System (INIS)

    Shim, S.; Ohn, M.; Harwood, C.

    2012-01-01

    The Canadian Nuclear Safety Commission (CNSC) has been establishing the regulatory framework for the efficient and effective licensing of new nuclear reactor facilities. This regulatory framework includes the documentation of the requirements for the design and safety analysis of new nuclear reactor facilities, regardless of size. For this purpose, the CNSC has published the design and safety analysis requirements in the following two sets of regulatory documents: 1. RD-337, Design of New Nuclear Power Plants and RD-310, Safety Analysis for Nuclear Power Plants; and 2. RD-367, Design of Small Reactor Facilities and RD-308, Deterministic Safety Analysis for Small Reactor Facilities. These regulatory documents have been modernized to document past practices and experience and to be consistent with national and international standards. These regulatory documents provide the requirements for the design and safety analysis at a high level presented in a hierarchical structure. These documents were developed in a technology neutral approach so that they can be applicable for a wide variety of water cooled reactor facilities. This paper highlights two particular aspects of these regulatory documents: The use of a graded approach to make the documents applicable for a wide variety of nuclear reactor facilities including nuclear power plants (NPPs) and small reactor facilities; and, Design requirements that are new and different from past Canadian practices. Finally, this paper presents some of the proposed changes in RD-337 to implement specific details of the recommendations of the CNSC Fukushima Task Force Report. Major changes were not needed as the 2008 version of RD-337 already contained requirements to address most of the lessons learned from the Fukushima event of March 2011. (author)

  7. Managing Requirement Volatility in an Ontology-Driven Clinical LIMS Using Category Theory

    Directory of Open Access Journals (Sweden)

    Arash Shaban-Nejad

    2009-01-01

    Full Text Available Requirement volatility is an issue in software engineering in general, and in Web-based clinical applications in particular, which often originates from an incomplete knowledge of the domain of interest. With advances in the health science, many features and functionalities need to be added to, or removed from, existing software applications in the biomedical domain. At the same time, the increasing complexity of biomedical systems makes them more difficult to understand, and consequently it is more difficult to define their requirements, which contributes considerably to their volatility. In this paper, we present a novel agent-based approach for analyzing and managing volatile and dynamic requirements in an ontology-driven laboratory information management system (LIMS designed for Web-based case reporting in medical mycology. The proposed framework is empowered with ontologies and formalized using category theory to provide a deep and common understanding of the functional and nonfunctional requirement hierarchies and their interrelations, and to trace the effects of a change on the conceptual framework.

  8. Angular glint effects generation for false naval target verisimility requirements

    International Nuclear Information System (INIS)

    Kostis, Theodoros G; Galanis, Konstantinos G; Katsikas, Sokratis K

    2009-01-01

    A stimulating problem in the generation of coherent countermeasures for high range resolution radar systems is the inclusion of angular glint effects in the preparation of the false target mask. Since angular glint is representative of extended naval targets, this inclusion increases the credibility factor of the decoy playback signal at the adversary radar-operator station. In this paper, the ability of an interferometric inverse synthetic aperture radar (InISAR) simulator to provide a proof of concept towards the clarification of this challenging task is ascertained. The solution consists of three novel vector representations of the generated data, which are proven to behave according to the laws of physics governing the glint phenomenon. The first depiction is the angular glint injection at the target which is followed by the representation of the wavefront distortion at the radar. A value-added time procession integration of the target in pure roll motion provides an expected by ISAR theory side-view image of the naval extended false target. The effectiveness of the proposed approach through verification and validation of the results by using the method of pictorial evidence is established. A final argument is raised on the usage of this software tool for actual obfuscation and deception actions for air defence at sea applications

  9. ENVIRONMENTAL SPECIFICATION REQUIREMENTS

    International Nuclear Information System (INIS)

    TIFFT, S.R.

    2003-01-01

    Through regulations, permitting or binding negotiations, Regulators establish requirements, limits, permit conditions and Notice of Construction (NOC) conditions with which the Office of River Protection (ORP) and the Tank Farm Contractor (TFC) must comply. Operating Specifications are technical limits which are set on a process to prevent injury to personnel, or damage to the facility or environment. The main purpose of this document is to provide specification limits and recovery actions for the TFC Environmental Surveillance Program at the Hanford Site. Specification limits are given for monitoring frequencies and permissible variation of readings from an established baseline or previous reading. The requirements in this document are driven by environmental considerations and data analysis issues, rather than facility design or personnel safety issues. This document is applicable to all single-shell tank (SST) and double-shell tank (DST) waste tanks, and the associated catch tanks and receiver tanks, and transfer systems. This Tank Farm Environmental Specifications Document (ESD) implements environmental-regulatory limits on the configuration and operation of the Hanford Tank Farms facility that have been established by Regulators. This ESD contains specific field operational limits and recovery actions for compliance with airborne effluent regulations and agreements, liquid effluents regulations and agreements, and environmental tank system requirements. The scope of this ESD is limited to conditions that have direct impact on Operations Projects or that Operations/Projects have direct impact upon. This document does not supercede or replace any DOE Orders, regulatory permits, notices of construction, or Regulatory agency agreements binding on the ORP or the TFC. Refer to the appropriate regulation, permit, or NOC for an inclusive listing of requirements

  10. Building beef cow nutritional programs with the 1996 NRC beef cattle requirements model.

    Science.gov (United States)

    Lardy, G P; Adams, D C; Klopfenstein, T J; Patterson, H H

    2004-01-01

    Designing a sound cow-calf nutritional program requires knowledge of nutrient requirements, diet quality, and intake. Effectively using the NRC (1996) beef cattle requirements model (1996NRC) also requires knowledge of dietary degradable intake protein (DIP) and microbial efficiency. Objectives of this paper are to 1) describe a framework in which 1996NRC-applicable data can be generated, 2) describe seasonal changes in nutrients on native range, 3) use the 1996NRC to predict nutrient balance for cattle grazing these forages, and 4) make recommendations for using the 1996NRC for forage-fed cattle. Extrusa samples were collected over 2 yr on native upland range and subirrigated meadow in the Nebraska Sandhills. Samples were analyzed for CP, in vitro OM digestibility (IVOMD), and DIP. Regression equations to predict nutrients were developed from these data. The 1996NRC was used to predict nutrient balances based on the dietary nutrient analyses. Recommendations for model users were also developed. On subirrigated meadow, CP and IVOMD increased rapidly during March and April. On native range, CP and IVOMD increased from April through June but decreased rapidly from August through September. Degradable intake protein (DM basis) followed trends similar to CP for both native range and subirrigated meadow. Predicted nutrient balances for spring- and summer-calving cows agreed with reported values in the literature, provided that IVOMD values were converted to DE before use in the model (1.07 x IVOMD - 8.13). When the IVOMD-to-DE conversion was not used, the model gave unrealistically high NE(m) balances. To effectively use the 1996NRC to estimate protein requirements, users should focus on three key estimates: DIP, microbial efficiency, and TDN intake. Consequently, efforts should be focused on adequately describing seasonal changes in forage nutrient content. In order to increase use of the 1996NRC, research is needed in the following areas: 1) cost-effective and

  11. Requirements Analysis in the Value Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Conner, Alison Marie

    2001-05-01

    The Value Methodology (VM) study brings together a multidisciplinary team of people who own the problem and have the expertise to identify and solve it. With the varied backgrounds and experiences the team brings to the study, come different perspectives on the problem and the requirements of the project. A requirements analysis step can be added to the Information and Function Analysis Phases of a VM study to validate whether the functions being performed are required, either regulatory or customer prescribed. This paper will provide insight to the level of rigor applied to a requirements analysis step and give some examples of tools and techniques utilized to ease the management of the requirements and functions those requirements support for highly complex problems.

  12. UTM TCL2 Software Requirements

    Science.gov (United States)

    Smith, Irene S.; Rios, Joseph L.; McGuirk, Patrick O.; Mulfinger, Daniel G.; Venkatesan, Priya; Smith, David R.; Baskaran, Vijayakumar; Wang, Leo

    2017-01-01

    The Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level (TCL) 2 software implements the UTM TCL 2 software requirements described herein. These software requirements are linked to the higher level UTM TCL 2 System Requirements. Each successive TCL implements additional UTM functionality, enabling additional use cases. TCL 2 demonstrated how to enable expanded multiple operations by implementing automation for beyond visual line-of-sight, tracking operations, and operations flying over sparsely populated areas.

  13. Information requirements for enterprise systems

    OpenAIRE

    Sommerville, Ian; Lock, Russell; Storer, Tim

    2012-01-01

    In this paper, we discuss an approach to system requirements engineering, which is based on using models of the responsibilities assigned to agents in a multi-agency system of systems. The responsibility models serve as a basis for identifying the stakeholders that should be considered in establishing the requirements and provide a basis for a structured approach, described here, for information requirements elicitation. We illustrate this approach using a case study drawn from civil emergenc...

  14. Review of light water reactor regulatory requirements: Assessment of selected regulatory requirements that may have marginal importance to risk: Postaccident sampling system, Turbine missiles, Combustible gas control, Charcoal filters

    International Nuclear Information System (INIS)

    Scott, W.B.; Jamison, J.D.; Stoetzel, G.A.; Tabatabai, A.S.; Vo, T.V.

    1987-05-01

    In a study commissioned by the Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory (PNL) evaluated the costs and benefits of modifying regulatory requirements in the areas of the postaccident sampling system, turbine rotor design reviews and inspections, combustible gas control for inerted Boiling Water Reactor (BWR) containments, and impregnated charcoal filters in certain plant ventilation systems. The basic framework for the analyses was that presented in the Regulatory Analysis Guidelines (NUREG/BR-0058) and in the Handbook for Value-Impact Assessment (NUREG/CR-3568). The effects of selected modifications to regulations were evaluated in terms of such factors as public risk and costs to industry and NRC. The results indicate that potential modifications of the regulatory requirements in three of the four areas would have little impact on public risk. In the fourth area, impregnated charcoal filters in building ventilation systems do appear to limit risks to the public and plant staff. Revisions in the severe accident source term assumptions, however, may reduce the theoretical value of charcoal filters. The cost analysis indicated that substantial savings in operating costs may be realized by changing the interval of turbine rotor inspections. Small to moderate operating cost savings may be realized through postulated modifications to the postaccident sampling system requirements and to the requirements for combustible gas control in inerted BWR containments. Finally, the use of impregnated charcoal filters in ventilation systems appears to be the most cost-effective method of reducing radioiodine concentrations

  15. Skills Required for Nursing Career Advancement: A Qualitative Study.

    Science.gov (United States)

    Sheikhi, Mohammad Reza; Fallahi-Khoshnab, Masoud; Mohammadi, Farahnaz; Oskouie, Fatemeh

    2016-06-01

    Nurses require certain skills for progression in their field. Identifying these skills can provide the context for nursing career advancement. This study aimed to identify the skills needed for nurses' career advancement. A qualitative approach using content analysis was adopted to study a purposive sample of eighteen nurses working in teaching hospitals affiliated with the Qazvin, Shahid Beheshti, and Iran Universities of Medical Sciences. The data were collected through semi-structured interviews, and analyzed using conventional content analysis. The three themes extracted from the data included interpersonal capabilities, competency for career success, and personal capacities. The results showed that acquiring a variety of skills is essential for career advancement. The findings showed that personal, interpersonal, and functional skills can facilitate nurses' career advancement. The effects of these skills on career advancement depend on a variety of conditions that require further studies.

  16. Regulation E 69-14. Monitoring requirements for medical devices

    International Nuclear Information System (INIS)

    2015-01-01

    In the 'Regulations for the State Evaluation and Registration of Medical Equipment' force (Hereinafter Rules) set forth in Chapter VII, Articles 79 and 86, the monitoring activity as one of the programs necessary for evaluating the safety and effectiveness of medical monitoring equipment. In the years 2008 and 2011 were approved and implemented by the Center for State Control of Medical Equipment (CCEEM) Regulations and -1.1 ER and ER-1 that support and regulatory requirements 'Control and monitoring of pacemakers and implantable defibrillators' and 'Assessment, recording and control after market surgical silicone implants,' which are specific to these products and have provided a useful result for the performance of the activity. Given the number and diversity of high-risk medical devices as implantable or sustain human life that are brought into our National Health System (SNS), a regulation establishing control over the behavior becomes necessary safety and effectiveness of this equipment during use, which provide inputs to risk management. The objective of this regulation is to establish the regulatory requirements for tracking medical equipment introduced in the NHS. The provisions of this Regulation is aimed at health institutions, to CECMED as manufacturers, suppliers, distributors and importers of medical equipment.

  17. Effect of intravenous iron saccharate on the requirements ofErythropoietin in Hemodialysis patients

    International Nuclear Information System (INIS)

    Shaheen, F.A.M.; Akeel, N.; Souqiyye, M.Z.

    2002-01-01

    We attempt in this study to evaluate the effect of intravenous ironsaccharate (i.v. Sach) on the erythropoietin (EPO) requirements during theinitial phase of replacement therapy with recombinant human erythropoietin(r-HuEPO) in adult chronic hemodialysis (HD) patients. We evaluated 96 studypatients who completed 12 weeks of treatment with EPO. There were 69 (72%)males and 27 (28%) females with a mean age of 44+-10 years (range 24 to 74years). The patients were initiated on EPO at 50 units/kg body weightsubcutaneously post-dialysis two to three times weekly. Intravenous iron wasadministered to maintain the ferritin levels and transferrin saturation ratiowithin normal range. There were 36 (37.5%) patients who received i.v. Sach atdoses of 100 mg at the end of dialysis two or three times per week during thewhole study period (total dose 2400-3600 mg). Of the 96 study patients, 91(94.8%) responded to the EPO. The mean hemoglobin (Hb) at entry to the studywas 72+-84 g/L (range 52-88 g/L). There was significant increase of the meanHb to 108+-10 g/L (range 70-120 grams/L) at the end of study (P 0.2and ferritin 0.2 and ferritin >100ng/ml. There were 19 patients in group I (13 received i.v. Sach), 26 in groupII (16 received i.v. Sach) and 44 in group III (seven received i.v. Sach).There was a group of seven patients who had TSAT 100ng/ml, however, none received i.v. sach and they were not included in thestratification. There was no significant difference in the mean Hb betweenpatients who received and those who did not receive i.v. Sach in thesub-groups studied. However, there was a significant decrease in the meanweekly dose of EPO in the patients who received i.v. Sach. We conclude thatroutine use of i.v. iron supplementation in chronic HD patients receivingrecombinant EPO may be beneficial in the initial phase of treatment inattaining the target Hb with lower doses of EPO, regardless of the status ofthe iron indices. (author)

  18. Dosimeter characteristics and service performance requirements

    International Nuclear Information System (INIS)

    Ambrosi, P.; Bartlett, D.T.

    1999-01-01

    The requirements for personal dosimeters and dosimetry services given by ICRP 26, ICRP 35, ICRP 60 and ICRP 75 are summarised and compared with the requirements given in relevant international standards. Most standards could be made more relevant to actual workplace conditions. In some standards, the required tests of energy and angular dependence of the response are not sufficient, or requirements on overall uncertainty are lacking. (author)

  19. Philosophies Applied in the Selection of Space Suit Joint Range of Motion Requirements

    Science.gov (United States)

    Aitchison, Lindsway; Ross, Amy; Matty, Jennifer

    2009-01-01

    Space suits are the most important tool for astronauts working in harsh space and planetary environments; suits keep crewmembers alive and allow them to perform exploration, construction, and scientific tasks on a routine basis over a period of several months. The efficiency with which the tasks are performed is largely dictated by the mobility features of the space suit. For previous space suit development programs, the mobility requirements were written as pure functional mobility requirements that did not separate joint ranges of motion from the joint torques. The Constellation Space Suit Element has the goal to make more quantitative mobility requirements that focused on the individual components of mobility to enable future suit designers to build and test systems more effectively. This paper details the test planning and selection process for the Constellation space suit pressure garment range of motion requirements.

  20. Functional dissection of the alphavirus capsid protease: sequence requirements for activity.

    Science.gov (United States)

    Thomas, Saijo; Rai, Jagdish; John, Lijo; Günther, Stephan; Drosten, Christian; Pützer, Brigitte M; Schaefer, Stephan

    2010-11-18

    The alphavirus capsid is multifunctional and plays a key role in the viral life cycle. The nucleocapsid domain is released by the self-cleavage activity of the serine protease domain within the capsid. All alphaviruses analyzed to date show this autocatalytic cleavage. Here we have analyzed the sequence requirements for the cleavage activity of Chikungunya virus capsid protease of genus alphavirus. Amongst alphaviruses, the C-terminal amino acid tryptophan (W261) is conserved and found to be important for the cleavage. Mutating tryptophan to alanine (W261A) completely inactivated the protease. Other amino acids near W261 were not having any effect on the activity of this protease. However, serine protease inhibitor AEBSF did not inhibit the activity. Through error-prone PCR we found that isoleucine 227 is important for the effective activity. The loss of activity was analyzed further by molecular modelling and comparison of WT and mutant structures. It was found that lysine introduced at position 227 is spatially very close to the catalytic triad and may disrupt electrostatic interactions in the catalytic site and thus inactivate the enzyme. We are also examining other sequence requirements for this protease activity. We analyzed various amino acid sequence requirements for the activity of ChikV capsid protease and found that amino acids outside the catalytic triads are important for the activity.