WorldWideScience

Sample records for annuloplasty device leaves

  1. 21 CFR 870.3800 - Annuloplasty ring.

    Science.gov (United States)

    2010-04-01

    ...) Identification. An annuloplasty ring is a rigid or flexible ring implanted around the mitral or tricuspid heart valve for reconstructive treatment of valvular insufficiency. (b) Classification. Class II (special...

  2. Early results after implantation of a new geometric annuloplasty ring for aortic valve repair.

    Science.gov (United States)

    Mazzitelli, Domenico; Nöbauer, Christian; Rankin, J Scott; Badiu, Catalin C; Krane, Markus; Crooke, Philip S; Cohn, William E; Opitz, Anke; Schreiber, Christian; Lange, Rüdiger

    2013-01-01

    Aortic valve repair is associated with fewer long-term valve-related complications as compared with valve replacement, and repair is being performed increasingly. A current problem is the lack of a geometric annuloplasty ring to facilitate reconstruction. This paper describes the first clinical application of such a device designed to permanently restore physiologic annular size and geometry during aortic valve repair. Based on mathematical studies of human cadaver valves, as well as computed tomography angiographic analyses of awake patients with normal valves, a three-dimensional annuloplasty ring has been developed, consisting of low-profile, one-piece titanium construction and Dacron cloth covering. The ring design incorporates 2:3 elliptical base geometry and 10-degree outwardly flaring subcommissural posts. Appropriately sized rings were implanted in 5 patients with severe aortic insufficiency due to annular dilation and anatomic leaflet defects. The rings restored annular geometry and facilitated leaflet repairs in all patients. Each recovered excellent valve function with minimal residual leak. All patients convalesced uneventfully, were discharged within 7 days after surgery, and continue with stable valve function as long as 6 months after implantation. Initial clinical application of a geometric aortic annuloplasty ring was associated with excellent device performance and perhaps better repairs. Further clinical series and patient follow-up should identify potential benefits of the device, including improved applicability and stability of aortic valve repair. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Biocompatibility and Systemic Safety of a Novel Implantable Annuloplasty Ring for the Treatment of Mitral Regurgitation in a Minipig Model.

    Science.gov (United States)

    Ramot, Yuval; Rousselle, Serge D; Yellin, Nadav; Willenz, Udi; Sabag, Itai; Avner, Avi; Nyska, Abraham

    2016-07-01

    Prosthetic annuloplasty rings are a common treatment modality for mitral regurgitation, and recently, percutaneous implantation techniques have gained popularity due to their favorable safety profile. Although in common use, biocompatibility of annuloplasty rings has been reported only sparsely in the literature, and none of these reports used the percutaneous technique of implantation. We report on the biocompatibility and the systemic safety of a novel transcatheter mitral valve annuloplasty ring (AMEND™) in 6 minipigs. This device is composed of a nitinol tube surrounded by a braided polyethylene terephthalate fabric tube. The device produced no adverse inflammatory response, showing gradual integration between the metal ring and the fabric by normal host fibrocellular response, leading to complete neoendocardium coverage. There was no evidence for adverse reactions, rejection, or intolerance in the valvular structure. In 2 animals, hemopericardium resulted from the implantation procedure, leading to right-sided cardiac insufficiency with pulmonary edema and liver congestion. The findings reported herein can serve as a case study for the expected healing pathology reactions after implantation of transcatheter mitral valve annuloplasty rings. © The Author(s) 2016.

  4. Functional Tricuspid Regurgitation and Ring Annuloplasty Repair

    Directory of Open Access Journals (Sweden)

    William B. Weir, MD

    2018-01-01

    Full Text Available Functional tricuspid regurgitation (TR primarily arises from asymmetric dilation of the tricuspid annulus in the setting of right ventricular dysfunction and enlargement in response to left-sided myocardial and valvular abnormalities. Even if the TR is not severe at the time of mitral valve surgery, it can worsen and even appear late after successful mitral valve surgery, which portends a poor prognosis. Despite data demonstrating inferior outcomes in the presence of residual TR, surgical repair for functional TR remains underused. Acceptance of TR, in the presence of tricuspid annular dilation, may be unacceptable. Surgical repair should consist of placement of a rigid or semirigid annular ring, which has been shown to provide superior durability as compared with suture and flexible band techniques. Finally, percutaneous annuloplasty for correction of functional TR may allow treatment of patients with recurrent TR at high risk of reoperation.

  5. Fracture of Colvin-Galloway-Future band in a patient with mitral valve annuloplasty.

    Science.gov (United States)

    Bauer, S; Rosendahl, U; Pietrowski, D; Ennker, J

    2006-08-01

    Annuloplasty with various annuloplasty ring systems is a fundamental part of mitral valve repair and has been frequently performed since its introduction by Carpentier in 1969. Due to the different advantages or disadvantages of each system, some controversies exist regarding the best type of ring annuloplasty support. Here we describe, for the first time, the case of a female patient in which a fracture of a semi-rigid open annuloplasty ring occurred, leading to annular deformation and mitral regurgitation.

  6. Comparison of outcomes of tricuspid annuloplasty with 3D-rigid versus flexible prosthetic ring for functional tricuspid regurgitation secondary to rheumatic mitral valve disease.

    Science.gov (United States)

    Wang, Haiping; Liu, Xiancheng; Wang, Xin; Lv, Zhenqian; Liu, Xiaojun; Xu, Ping

    2016-11-01

    Annuloplasty bands and rings are widely used for repairing functional tricuspid regurgitation (FTR). However, the question regarding which is the ideal annuloplasty device remains unclear. The aim of this study was to compare the efficacy and mid-term durability of tricuspid ring annuloplasty for FTR secondary to rheumatic mitral valve disease using flexible Cosgrove-Edwards band and the rigid Edwards MC3 ring (Edwards Lifesciences, LLC, Irvine, CA, USA). We retrospectively collected the clinical data of those who underwent mitral valve replacement (MVR) in concomitant with tricuspid ring annuloplasty from 2009 to 2013. The flexible band was used in 46 patients (flexible group), and the 3D rigid ring was used in 60 patients (rigid group). Echocardiographic evaluation of tricuspid function was performed preoperatively and postoperatively. The grade of TR was significantly improved compared to preoperative values in two groups. There was no significant difference regarding postoperative TR grade between the two groups at 1 week and 2-3 months but there was statistical significant difference at postoperative 6-12 months, and 2-3 years. During the follow up period, 25 of 46 patients (54.3%) in flexible group and 22 of 60 patients (30.3%) in rigid group developed recurrent TR. Freedom from recurrent TR in flexible group is significant lower than rigid group in each postoperative follow up period. These findings suggest that 3D rigid ring annuloplasty might be more effective for tricuspid ring annuloplasty in FTR in mid-term postoperative periods when compared to flexible band.

  7. Mitral stenosis due to pannus overgrowth after rigid ring annuloplasty.

    Science.gov (United States)

    Oda, Takeshi; Kato, Seiya; Tayama, Eiki; Fukunaga, Shuji; Akashi, Hidetoshi; Aoyagi, Shigeaki

    2010-03-01

    Although mitral stenosis (MS) due to pannus overgrowth after mitral valve repair for rheumatic mitral regurgitation (MR) is not uncommon, it is extremely rare in relation to non-rheumatic mitral regurgitation. Whilst it has been suggested that the rigid annuloplasty ring induces pannus overgrowth in the same manner as the flexible ring, to date only in cases using the flexible ring has pannus formation been confirmed by a pathological examination after redo surgery. The case is described of a woman who had undergone mitral valve repair using a 28 mm rigid ring three years previously because of non-rheumatic MR, and subsequently suffered from MS due to pannus formation over the annuloplasty ring. To the present authors' knowledge, this is the first report of MS due to pannus formation after mitral valve repair using a rigid annuloplasty ring to treat non-rheumatic MR documented at reoperation.

  8. The role of annular dimension and annuloplasty in tricuspid aortic valve repair.

    Science.gov (United States)

    de Kerchove, Laurent; Mastrobuoni, Stefano; Boodhwani, Munir; Astarci, Parla; Rubay, Jean; Poncelet, Alain; Vanoverschelde, Jean-Louis; Noirhomme, Philippe; El Khoury, Gebrine

    2016-02-01

    Valve sparing reimplantation can improve the durability of bicuspid aortic valve repair compared with subcommissural annuloplasty, especially in patients with a large basal ring. This study analyses the effect of basal ring size and annuloplasty on valve repair in the setting of a tricuspid aortic valve. From 1995 to 2013, 382 patients underwent elective tricuspid aortic valve repair. We included only those undergoing subcommissural annuloplasty, valve sparing reimplantation or no annuloplasty and in whom intraoperative transoesophageal echocardiography images were available for retrospective pre- and post-repair basal ring measurements (n = 323, subcommissural annuloplasty: 146, valve sparing reimplantation: 154, no annuloplasty: 23). In a subgroup of patients with available echocardiographic images, basal ring was retrospectively measured at the latest follow-up or prior to reoperation. subcommissural annuloplasty and valve sparing reimplantation were compared after matching for degree of aortic regurgitation and root size. All three groups differed significantly for most of preoperative characteristics. Hospital mortality was 0.9%. The median follow-up was 4.7 years. At 8 years, overall survival was 80 ± 5%. Freedom from reoperation and freedom from aortic regurgitation >1+ were 92 ± 5% and 71 ± 8%, respectively. In multivariate analysis, predictors of aortic regurgitation >1+ were left ventricular end-diastolic diameter (P = 0.003), cusp repair (P = 0.006), body surface area (P = 0.01) and subcommissural annuloplasty (P = 0.05). In subcommissural annuloplasty, freedom from aortic regurgitation >1+ was lower for patients with basal ring ≥28 mm compared with patients with basal ring 1+ was independent of basal ring size (P = 0.38). In matched comparison between subcommissural annuloplasty and valve sparing reimplantation, freedom from aortic regurgitation >1+ was not significantly different (P = 0.06), but in patients with basal ring ≥28 mm, valve sparing

  9. Vanishing De Vega annuloplasty for functional tricuspid regurgitation.

    Science.gov (United States)

    Duran, C M; Kumar, N; Prabhakar, G; Ge, Z; Bianchi, S; Gometza, B

    1993-10-01

    Annuloplasty is performed for significant functional tricuspid regurgitation even if it is presumed that in some cases the regurgitation will regress spontaneously after correction of the left-sided lesion. In an attempt to avoid the drawbacks of a permanent annuloplasty, we used a reabsorbable De Vega annuloplasty in a selected group of patients. Of 73 patients with functional tricuspid regurgitation operated on between May 1989 and May 1991, 25 with pulmonary arteriolar resistance below 400 dyne.sec.cm-5 underwent a De Vega annuloplasty with 2-0 polydioxanone suture. The diagnosis of significant functional tricuspid regurgitation (mean 2.74 +/- 1.05) was established by transthoracic color Doppler echocardiography in all patients. The degree of functional tricuspid regurgitation and pulmonary arteriolar resistance were measured with the patients anesthetized. In 16 patients the regurgitation remained severe (3+ to 4+) and in 9 it was moderate (2+). Twenty-three patients had mitral (12 repairs, 11 replacements) and 9 had aortic (4 repairs, 5 replacements) valve operations. The immediate postbypass residual functional tricuspid regurgitation was 0 to 1+ in 23 and 0 in 2. There was 1 (4%) operative death. The maximum follow-up period was 24 months (mean 13.9 months). There were 2 (8.3%) late deaths. Six patients underwent reoperation because of mitral dysfunction. Four of them who were reoperated on between 2 and 5 weeks after the initial procedure showed no recurrence of functional tricuspid regurgitation. The other 2, reoperated on at 5 and 10 months after the first operation, had recurrence of functional tricuspid regurgitation. Visual inspection of these two tricuspid valves showed a dilated anulus with otherwise normal valves. All surviving patients are in New York Heart Association functional class I or II without significant functional tricuspid regurgitation (mean 0.78 +/- 0.56). We concluded that functional tricuspid regurgitation in patients with low

  10. Mitral valve repair with adjustable ring annuloplasty.

    Science.gov (United States)

    Andreas, Martin; Haberl, Thomas; Paul Werner, Paul Werner; Guri, Jani; Kocher, Alfred; Hamza, Ouafa; Podesser, Bruno; Laufer, Guenther

    2018-02-28

    We demonstrate the technical aspects of a novel adjustable mitral ring. This new ring was implanted in a female landrace pig, for training and educational purposes. It can be adjusted independently in the P1, P2 and P3 segments, if required, to treat  recurrent mitral regurgitation, and this is a key difference to comparable devices. The first-in-man implantation is anticipated in the near future. © The Author 2016. Published by MMCTS on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

  11. Preoperative Three-Dimensional Valve Analysis Predicts Recurrent Ischemic Mitral Regurgitation After Mitral Annuloplasty

    NARCIS (Netherlands)

    Bouma, Wobbe; Lai, Eric K.; Levack, Melissa M.; Shang, Eric K.; Pouch, Alison M.; Eperjesi, Thomas J.; Plappert, Theodore J.; Yushkevich, Paul A.; Mariani, Massimo A.; Khabbaz, Kamal R.; Gleason, Thomas G.; Mahmood, Feroze; Acker, Michael A.; Woo, Y. Joseph; Cheung, Albert T.; Jackson, Benjamin M.; Gorman, Joseph H.; Gorman, Robert C.

    Background. Valve repair for ischemic mitral regurgitation (IMR) with undersized annuloplasty rings is characterized by high IMR recurrence rates. Patient-specific preoperative imaging-based risk stratification for recurrent IMR would optimize results. We sought to determine if prerepair

  12. Remodeling Mitral Annuloplasty Ring Concept with Preserved Dynamics of Annular Height

    DEFF Research Database (Denmark)

    Skov, Søren N; Røpcke, Diana M; Tjørnild, Marcell J

    2017-01-01

    BACKGROUND: The configuration of the native annulus changes from nearly flat in the diastolic phase to saddle-shaped in the systolic phase. The present study was conducted to test a novel remodeling annuloplasty ring with built-in septal-lateral fixation and commissural axial flexibility so...... as to maintain the change in annular saddle shape. The study aim was to evaluate the in-vivo biomechanical performance of the novel annuloplasty ring, compared with the native valve and a semi-rigid and rigid annuloplasty ring. METHODS: All measurements were performed in vivo using a porcine model. A total of 28...... pigs (bodyweight ca. 80 kg) were randomized to four groups: (i) with no ring; (ii) with a novel remodeling ring; (iii) with a semi-rigid ring (Physio I Ring, Edwards Lifesciences); and (iv) with a rigid ring (Classic Annuloplasty Ring, Edwards Lifesciences). Force measurements were performed using...

  13. Restrictive Mitral Annuloplasty Does Not Limit Exercise Capacity.

    Science.gov (United States)

    Deja, Marek A; Żak, Aleksandra; Malinowski, Marcin; Pysz, Piotr; Gaszewska-Żurek, Ewa; Turski, Maciej; Janusiewicz, Piotr; Wita, Krystian; Chudek, Jerzy

    2015-10-01

    Restrictive mitral annuloplasty is the preferred method of treating secondary mitral regurgitation. The use of small annuloplasty rings to reduce the high recurrence rates may result in mitral stenosis. Thirty-six patients who underwent restrictive mitral annuloplasty with Carpentier-Edwards classic 26 size ring underwent exercise echocardiography and ergospirometry. Resting catecholamines and N-terminal pro brain natriuretic peptide (NT-proBNP) levels were measured. At the time of study, the median time from operation was 16.6 months (interquartile range, 8.5 to 43.3 months). Left ventricular end-systolic volume index (LVESVI) was 67 mL/m(2) (interquartile range, 25 to 92 mL/m(2)), and ejection fraction (EF) was 38.8% (interquartile range, 28.3% to 59.0%). Mitral gradients were higher at the leaflet tips than at the annular level. Continuous wave (CW) Doppler gradients at rest were 3.4 mmHg (interquartile range, 2.4 to 4.9 mmHg) mean and 9.5 mmHg (interquartile range, 7.0 to 14.7 mmHg) maximal. On exertion, they increased to 6.8 mmHg (interquartile range, 5.4 to 8.8 mmHg) (p = 0.001) and 19.7 mmHg (interquartile range, 12.8 to 23.3 mmHg) (p = 0.001), respectively. Maximal VO2 was 18.2 mL/kg/min (interquartile range, 16.3 to 21.5 mL/kg/min), VE/VCO2 slope was 31.1 (interquartile range, 26 to 34). Epinephrine level was 0.024 ng/mL (interquartile range, 0.0098 to 0.043 ng/mL), norepinephrine was 0.61 ng/mL (interquartile range, 0.41 to 0.95 ng/mL), and NT-proBNP was 303 pg/mL (interquartile range, 155 to 553 pg/mL). Maximal VO2 negatively correlated with resting norepinephrine level (r = -0.50, p = 0.003). VE/VCO2 slope positively correlated with NT-proBNP (r = 0.36, p = 0.004) and epinephrine (r = 0.36, p = 0.04) levels and with LV volumes (r = 0.51, p = 0.006) and was negatively correlated with LVEF (r = -0.52, p = 0.004). Neither maximal VO2 nor VE/VCO2 slope correlated with the highest mean (r = 0.24, p = 0.2, and r = -0.20, p = 0.3, respectively) and maximal (r

  14. Repair for mitral stenosis due to pannus formation after Duran ring annuloplasty.

    Science.gov (United States)

    Song, Seunghwan; Cho, Seong Ho; Yang, Ji-Hyuk; Park, Pyo Won

    2010-12-01

    Mitral stenosis after mitral repair with using an annuloplasty ring is not common and it is almost always due to pannus formation. Mitral valve replacement was required in most of the previous cases of pannus covering the mitral valve leaflet, which could not be stripped off without damaging the valve leaflets. In two cases, we removed the previous annuloplasty ring and pannus without leaflet injury, and we successfully repaired the mitral valve. During the follow-up of 4 months and 39 months respectively, we observed improvement of the patients' symptoms and good valvular function. Redo mitral repair may be a possible method for treating mitral stenosis due to pannus formation after ring annuloplasty. Copyright © 2010 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Midterm follow up after Ebstein's anomaly repair augmented with tricuspid annuloplasty ring

    Directory of Open Access Journals (Sweden)

    Sherif Eliwa

    2017-06-01

    Conclusions: Augmentation of the tricuspid valve repair with annuloplasty ring can be performed with low mortality and morbidity. Early and mid-term follow-up showed clinical improvement in the majority of patients, low incidence of reoperations, and no need for tricuspid valve replacement (TVR.

  16. The value of preoperative 3-dimensional over 2-dimensional valve analysis in predicting recurrent ischemic mitral regurgitation after mitral annuloplasty

    NARCIS (Netherlands)

    Wijdh-den Hamer, Inez J.; Bouma, Wobbe; Lai, Eric K.; Levack, Melissa M.; Shang, Eric K.; Pouch, Alison M.; Eperjesi, Thomas J.; Plappert, Theodore J.; Yushkevich, Paul A.; Hung, Judy; Mariani, Massimo A.; Khabbaz, Kamal R.; Gleason, Thomas G.; Mahmood, Feroze; Acker, Michael A.; Woo, Y. Joseph; Cheung, Albert T.; Gillespie, Matthew J.; Jackson, Benjamin M.; Gorman, Joseph H.; Gorman, Robert C.

    Objectives: Repair for ischemic mitral regurgitation with undersized annuloplasty is characterized by high recurrence rates. We sought to determine the value of pre-repair 3-dimensional echocardiography over 2-dimensional echocardiography in predicting recurrence at 6 months. Methods: Intraoperative

  17. Microfluidics of sugar transport in plant leaves and in biomimetic devices

    DEFF Research Database (Denmark)

    Rademaker, Hanna

    The physical mechanisms underlying vital plant functions constitute a research field with many important, unsolved problems. Some of these research topics gaining attention in recent years are concerned with the fluid transport in plants. Plants photosynthesize sugars in their leaves for energy...... into the veins. We studied the physics of two basic mechanisms for sugar loading: the polymer trap and passive loading. The polymer trap is an active mechanism, which is characterized by an elevated concentration of sugars inside the veins compared to the rest of the leaf. This is achieved with the help...

  18. Leaving patients to their own devices? Smart technology, safety and therapeutic relationships.

    Science.gov (United States)

    Ho, Anita; Quick, Oliver

    2018-03-06

    This debate article explores how smart technologies may create a double-edged sword for patient safety and effective therapeutic relationships. Increasing utilization of health monitoring devices by patients will likely become an important aspect of self-care and preventive medicine. It may also help to enhance accurate symptom reports, diagnoses, and prompt referral to specialist care where appropriate. However, the development, marketing, and use of such technology raise significant ethical implications for therapeutic relationships and patient safety. Drawing on lessons learned from other direct-to-consumer health products such as genetic testing, this article explores how smart technology can also pose regulatory challenges and encourage overutilization of healthcare services. In order for smart technology to promote safer care and effective therapeutic encounters, the technology and its utilization must be safe. This article argues for unified regulatory guidelines and better education for both healthcare providers and patients regarding the benefits and risks of these devices.

  19. Can tricuspid annuloplasty of the donor heart reduce valve insufficiency following cardiac transplantation with bicaval anastomosis?

    Science.gov (United States)

    Fiorelli, Alfredo I; Oliveira, José L; Santos, Ronaldo H B; Coelho, Guilherme B; Oliveira, Adriana S; Lourenço-Filho, Domingos D; Lapenna, Gisele; Dias, Ricardo R; Bacal, Fernando; Bocchi, Edimar A; Stolf, Noedir A G

    2010-06-01

    The aim of this study was to evaluate the degree of tricuspid valve insufficiency after orthotopic cardiac transplantation with bicaval anastomosis and prophylactic donor heart annuloplasty. At present, our cardiac transplantation experience includes 478 cases. After January 2002, we included 30 consecutive patients in this study who had undergone orthotopic cardiac transplantation and survived >6 months. The patients were divided into 2 groups: group I, 15 patients who underwent transplantation with prophylactic tricuspid annuloplasty on the donor heart with the De Vega technique; and group II, 15 patients who underwent transplantation without this procedure. Their preoperative clinical characteristics were the same. During the late postoperative follow-up, the degree of tricuspid insufficiency was evaluated by transthoracic Doppler echocardiography and assessed according to the Simpson scale: 0, absent; 1, mild; 2, moderate; and 3, severe. Hemodynamic parameters were evaluated invasively by means of a Swan-Ganz catheter during routine endomyocardial biopsies. The mean follow-up time was 26.9 +/- 5.4 months (range, 12-36 months). In group I, 1 patient (6.6%) died from infection in the 18th month after the operation; the death was not related to the annuloplasty. In group II, 1 death (6.6%) occurred after 10 months because of rejection (P > .05). After the 24-month follow-up, the mean degree of tricuspid insufficiency was 0.4 +/- 0.5 in group I and 1.7 +/- 0.9 in group II (P tricuspid annuloplasty on the donor heart was able to reduce significantly the degree of valvular insufficiency, even in cardiac transplantation with bicaval anastomosis; however, it did not modify significantly the hemodynamic performance of the allograft during the investigation period. It is very important to extend the observation period and casuistics to verify other benefits that this technique may offer.

  20. The role of visual and direct force feedback in robotics-assisted mitral valve annuloplasty.

    Science.gov (United States)

    Currie, Maria E; Talasaz, Ali; Rayman, Reiza; Chu, Michael W A; Kiaii, Bob; Peters, Terry; Trejos, Ana Luisa; Patel, Rajni

    2017-09-01

    The objective of this work was to determine the effect of both direct force feedback and visual force feedback on the amount of force applied to mitral valve tissue during ex vivo robotics-assisted mitral valve annuloplasty. A force feedback-enabled master-slave surgical system was developed to provide both visual and direct force feedback during robotics-assisted cardiac surgery. This system measured the amount of force applied by novice and expert surgeons to cardiac tissue during ex vivo mitral valve annuloplasty repair. The addition of visual (2.16 ± 1.67), direct (1.62 ± 0.86), or both visual and direct force feedback (2.15 ± 1.08) resulted in lower mean maximum force applied to mitral valve tissue while suturing compared with no force feedback (3.34 ± 1.93 N; P forces on cardiac tissue during robotics-assisted mitral valve annuloplasty suturing, force feedback may be required. Copyright © 2016 John Wiley & Sons, Ltd.

  1. Mitral valve stenosis caused by abnormal pannus extension over the prosthetic ring and leaflets after Duran ring mitral annuloplasty.

    Science.gov (United States)

    Yunoki, Junji; Minato, Naoki; Katayama, Yuji; Sato, Hisashi

    2009-01-01

    We treated a 61-year-old woman with mitral stenosis caused by pannus formation after Duran ring annuloplasty. Pannus overgrowth on the ring with extension onto both leaflets narrowed the mitral orifice and severely restricted the mobility of the valve leaflets. Mitral valve replacement with a St. Jude Medical mechanical heart valve prosthesis was successfully performed, and the postoperative course was uneventful. Patients undergoing Duran ring annuloplasty should be followed up with the consideration of possible mitral stenosis caused by pannus extension, as the cause for pannus formation remains unclear.

  2. Tricuspid annuloplasty with the MC3 ring and septal plication technique.

    Science.gov (United States)

    Isomura, Tadashi; Hirota, Masanori; Hoshino, Joji; Fukada, Yasuhisa; Kondo, Taichi; Takahashi, Yu

    2015-01-01

    Functional tricuspid regurgitation is caused by annular dilation mainly in the posterior annulus. However, ring annuloplasty does not always prevent the recurrence of tricuspid regurgitation due to dilation of the septal annulus. We developed a septal plication technique with a 3-dimensional MC3 ring. Between 2006 and 2011, 76 patients (male/female 30/46; mean age 68 ± 11 years) with functional tricuspid regurgitation received tricuspid ring annuloplasty. After placement of the annular sutures, the 3 commissural ring portions were fixed on the equivalent commissures to plicate the anterior and posterior annulus. The end of the septal ring portion was fixed at the optimal annular position to obtain minimal tricuspid regurgitation. All patients were followed-up for a mean of 47 ± 18 months; the longest duration was 79 months. Although there was no operative death, one patient died of sepsis during hospitalization (hospital mortality 1.3%). After implantation of the MC3 ring (mean size 31.0 ± 3.3 mm), additional edge-to-edge sutures were required for minor leakage in 5 (7%) patients. The degree of tricuspid regurgitation was significantly reduced at discharge (0.5 ± 0.6) and midterm (0.6 ± 0.6) compared to 2.5 ± 0.7 before the operation (p tricuspid ring annuloplasty with a 3-dimensional MC3 ring. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  3. Prevalence, Predictors and Clinical Outcome of Residual Pulmonary Hypertension Following Tricuspid Annuloplasty.

    Science.gov (United States)

    Chen, Yan; Liu, Ju-Hua; Chan, Daniel; Sit, Ko-Yung; Wong, Chun-Ka; Ho, Kar-Lai; Ho, Lai-Ming; Zhen, Zhe; Lam, Yui-Ming; Lau, Chu-Pak; Au, Wing-Kok; Tse, Hung-Fat; Yiu, Kai-Hang

    2016-07-22

    Tricuspid annuloplasty is increasingly performed during left heart valve surgery, but the long-term clinical outcome postoperatively is not satisfactory. The aim of this study was to determine whether residual pulmonary hypertension (PHT) contributes to the adverse outcome. One-hundred thirty-seven patients (age 61±11 years; men, 30%) who underwent tricuspid annuloplasty during left-side valve surgery were enrolled. The mean pulmonary artery systolic pressure before surgery was 49±13 mm Hg and 32±15 mm Hg following surgery. Patients were divided into 3 groups according to postoperative pulmonary artery systolic pressure: no residual PHT (n=78, 57%), mild residual PHT (n=43, 31%), or significant residual PHT (n=16, 12%). A preoperative larger right ventricular (RV) geometry and tricuspid valve tethering area were associated with mild or significant residual PHT. A total of 24 adverse events (20 heart failures and 4 cardiovascular deaths) occurred during a median follow-up of 25 months. Kaplan-Meier survival curve demonstrated that patients with significant residual PHT had the highest percentage of adverse events followed by those with mild residual PHT. Patients with no residual PHT had a very low risk of adverse events. Multivariable Cox regression analysis revealed that both mild (hazard ratio=4.94; 95% CI =1.34-18.16; P=0.02) and significant residual PHT (hazard ratio=8.67; 95% CI =2.43-30.98; P<0.01) were independent factors associated with adverse events. The present study demonstrated that 43% of patients who underwent tricuspid annuloplasty had residual PHT. The presence of mild or significant residual PHT was associated with adverse events in these patients. © 2016 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  4. Restrictive annuloplasty to treat functional mitral regurgitation: optimize the restriction to improve the results?

    Science.gov (United States)

    Totaro, Pasquale; Adragna, Nicola; Argano, Vincenzo

    2008-03-01

    Today, the 'gold standard' treatment of functional mitral regurgitation (MR) is the subject of much discussion. Although restrictive annuloplasty is currently considered the most reproducible technique, the means by which the degree of annular restriction is optimized remains problematic. The study was designed in order to identify whether the degree of restriction of the mitral annulus could influence early and midterm results following the treatment of functional MR using restrictive annuloplasty. A total of 32 consecutive patients with functional MR grade > or = 3+ was enrolled, among whom the mean anterior-posterior (AP) mitral annulus diameter was 39 +/- 3 mm. Restrictive mitral annuloplasty (combined with coronary artery bypass grafting) was performed in all patients using a Carpentier-Edwards Classic or Physio ring (size 26 or 28). The degree of AP annular restriction was calculated for each patient, and correlated with early and mid-term residual MR and left ventricular (LV) reverse remodeling (in terms of LV end-diastolic diameter (LVEDD) and LV end-diastolic volume (LVEDV) reduction). All surviving patients were examined at a one-year follow up. The mean AP mitral annulus restriction achieved was 48 +/- 4%. Intraoperatively, transesophageal echocardiography showed no residual MR in any patient. Before discharge from hospital, transthoracic echocardiography confirmed an absence of residual MR and showed significant LV reverse remodeling (LVEDV from 121 +/- 25 ml to 97 +/- 26 ml; LVEDD from 55 +/- 6 mm to 47 +/- 8 mm). A significant correlation (r = 0.57, p 40% of preoperative) appears to have a favorable influence on early postoperative LV reverse remodeling, and also allows for complete resolution of functional MR. In addition, 'no tolerance' of early residual MR seems to have a favorable influence on mid-term results, leading to a reduction in the one-year recurrence of significant MR.

  5. Does concomitant tricuspid annuloplasty increase perioperative mortality and morbidity when correcting left-sided valve disease?

    Science.gov (United States)

    Zhu, Tie-Yuan; Wang, Jian-Gang; Meng, Xu

    2015-01-01

    A best evidence topic in adult valvular surgery was written according to a structured protocol. The question addressed was 'Does concomitant tricuspid annuloplasty increase the perioperative mortality and morbidity when correcting left-sided valve disease?' A total of 561 papers were found using the reported search, of which 12 presented the best evidence to answer the clinical question. The authors, country, journal, date of publication, patient group studied, study type, relevant outcomes and results of these papers are tabulated. Among these 12 papers, there were nine retrospective studies, two cohort studies and one randomized controlled trial (RCT). Overall, additional tricuspid valve (TV) repair takes more time during operations, particularly with a ring annuloplasty method. The mean aortic cross-clamping times were 57-83 min without associated tricuspid repair and 62-100 min with, and cardiopulmonary bypass times without and with repair were 82-124 and 90-174 min, respectively. A study of 624 patients who had undergone isolated mitral valve (MV) surgery and MV surgery plus TV repair showed more female and atrial fibrillation patients in the tricuspid valve plasty (TVP) group, but no increase in the 30-day mortality was found. One RCT, presenting similar patient baseline characteristics, also found no difference in the hospital mortality rates between the TVP group and the non-TVP group. Another 10 studies also demonstrated no statistically significant differences in perioperative mortality. In a cohort study of 311 patients undergoing MV repair with or without tricuspid annuloplasty, postoperative complications, such as bleeding, stroke, pacemaker, haemofiltration and myocardial infarction, all showed no statistically significant differences in the two groups. One study retrospectively analysed a large number of patients undergoing either isolated left-sided valve surgery or a concomitant TV repair, and there were no statistically significant differences

  6. Annular dynamics of memo3D annuloplasty ring evaluated by 3D transesophageal echocardiography.

    Science.gov (United States)

    Nishi, Hiroyuki; Toda, Koichi; Miyagawa, Shigeru; Yoshikawa, Yasushi; Fukushima, Satsuki; Yoshioka, Daisuke; Sawa, Yoshiki

    2018-04-01

    We assessed the mitral annular motion after mitral valve repair with the Sorin Memo 3D® (Sorin Group Italia S.r.L., Saluggia, Italy), which is a unique complete semirigid annuloplasty ring intended to restore the systolic profile of the mitral annulus while adapting to the physiologic dynamism of the annulus, using transesophageal real-time three-dimensional echocardiography. 17 patients (12 male; mean age 60.4 ± 14.9 years) who underwent mitral annuloplasty using the Memo 3D ring were investigated. Mitral annular motion was assessed using QLAB®version8 allowing for a full evaluation of the mitral annulus dynamics. The mitral annular dimensions were measured throughout the cardiac cycle using 4D MV assessment2® while saddle shape was assessed through sequential measurements by RealView®. Saddle shape configuration of the mitral annulus and posterior and anterior leaflet motion could be observed during systole and diastole. The mitral annular area changed during the cardiac cycle by 5.7 ± 1.8%.The circumference length and diameter also changed throughout the cardiac cycle. The annular height was significantly higher in mid-systole than in mid-diastole (p 3D ring maintained a physiological saddle-shape configuration throughout the cardiac cycle. Real-time three-dimensional echocardiography analysis confirmed the motion and flexibility of the Memo 3D ring upon implantation.

  7. [Plastic repair of tricuspid valve: Carpentier's ring annuloplasty versus De VEGA technique].

    Science.gov (United States)

    Charfeddine, Salma; Hammami, Rania; Triki, Faten; Abid, Leila; Hentati, Mourad; Frikha, Imed; Kammoun, Samir

    2017-01-01

    Tricuspid valve disease has been neglected for a long time by cardiologists and surgeons, but for some years now leakage of tricuspid valve has been demonstrated as a prognostic factor in the evolution of patients with left heart valve disease undergoing surgery. Several techniques for plastic repair of tricuspid valve have been developed and the published studies differ on the results of these techniques; we conducted this study to assess the results of plastic repair of tricuspid valve in a population of patients with a high prevalence of rheumatic disease and to compare Carpentier's ring annuloplasty techniques with DEVEGA plasty. We conducted a retrospective study of patients undergoing plastic repair of tricuspid valve in the Department of Cardiology at the Medicine University of Sfax over a period of 25 years. We compared the results from the Group 1 (Carpentier's ring annuloplasty) with Group 2 (DeVEGA plasty). 91 patients were included in our study, 45 patients in the Group 1 and 46 patients in the Group 2. Most patients had mean or severe TI (83%) before surgery, ring dilation was observed in 90% of patients with no significant difference between the two groups. Immediate results were comparable between the two techniques but during monitoring recurrent, at least mean, insufficiency was significantly more frequent in the DeVEGA plasty Group. The predictive factors for significant recurring long term TI were DeVEGA technique (OR=3.26[1.12-9.28]) in multivariate study and preoperative pulmonary artery systolic pressure (OR=1.06 (1.01-1.12)). Plastic repair of tricuspid valve using Carpentier's ring seems to guarantee better results than DeVEGA plasty. On the other hand, preoperative high PASP is predictive of recurrent leakage of tricuspid valve even after plasty; hence the importance of surgery in the treatment of patients at an early stage of the disease.

  8. De Vega Annuloplasty for Functional Tricupsid Regurgitation: Concept of Tricuspid Valve Orifice Index to Optimize Tricuspid Valve Annular Reduction

    Science.gov (United States)

    Hwang, Ho Young; Chang, Hyoung Woo; Jeong, Dong Seop

    2013-01-01

    We evaluated long-term results of De Vega annuloplasty measured by cylindrical sizers for functional tricuspid regurgitation (FTR) and analyzed the impact of measured annular size on the late recurrence of tricuspid valve regurgitation. Between 2001 and 2011, 177 patients (57.9±10.5 yr) underwent De Vega annuloplasty for FTR. Three cylindrical sizers (actual diameters of 29.5, 31.5, and 33.5 mm) were used to reproducibly reduce the tricuspid annulus. Long-term outcomes were evaluated and risk factor analyses for the recurrence of FTR ≥3+ were performed. Measured annular diameter indexed by patient's body surface area was included in the analyses as a possible risk factor. Operative mortality occurred in 8 patients (4.5%). Ten-year overall and cardiac death-free survivals were 80.5% and 90.8%, respectively. Five and 10-yr freedom rates from recurrent FTR were 96.5% and 93.1%, respectively. Cox proportional hazard model revealed that higher indexed annular size was the only risk factor for the recurrence of FTR (P=0.006). A minimal P value approach demonstrated that indexed annular diameter of 22.5 mm/m2 was a cut-off value predicting the recurrence of FTR. De Vega annuloplasty for FTR results in low rates of recurrent FTR in the long-term. Tricuspid annulus should be reduced appropriately considering patients' body size to prevent recurrent FTR. PMID:24339705

  9. Prosthesis-patient mismatch due to small ring annuloplasty in patients with degenerative mitral insufficiency.

    Science.gov (United States)

    Kawamoto, Naonori; Fujita, Tomoyuki; Hata, Hiroki; Shimahara, Yusuke; Sato, Shunsuke; Kobayashi, Junjiro

    2016-08-01

    Avoidance of prosthesis-patient mismatch (PPM) is important when selecting a mitral valve prosthesis. This study investigated the effect of PPM after small ring mitral valve annuloplasty on postoperative hemodynamics and the clinical course. This study retrospectively reviewed 227 patients with symptomatic severe mitral insufficiency (MI) who underwent mitral valve repair for degenerative MI using an Edwards ring or band (size: 26-32mm) between 2003 and 2012. Echocardiography was performed postoperatively and at follow-up to evaluate cardiac function, including residual MI, mean transmitral pressure gradient, left atrial diameter (LAD), and tricuspid regurgitant pressure gradient (TRPG). There were no operative deaths. Actuarial freedom from major adverse cardiac events was 91% at 10 years. The postoperative MI grade was not significantly different between different sizes of prosthesis (26mm, 0.67±0.8; 28mm, 0.73±0.9; 30mm, 0.85±0.9; 32mm, 0.3±0.6). LAD and TRPG were significantly lower for each size of prosthesis at follow-up (all pbody surface area received a significantly smaller prosthesis (pprosthesis than in patients with a larger size of prosthesis. Thirty-three patients had a follow-up transmitral pressure gradient ≥5mmHg. The follow-up LAD was larger in patients with a transmitral pressure gradient prosthesis. However, use of a smaller prosthesis may result in a higher mean transmitral pressure gradient, and may inhibit reverse remodeling of the left atrium. Therefore, PPM should be avoided. Copyright © 2015 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

  10. Mechanisms of valve competency after mitral valve annuloplasty for ischaemic mitral regurgitation using the Geoform ring: insights from three-dimensional echocardiography.

    Science.gov (United States)

    Armen, Todd A; Vandse, Rashmi; Crestanello, Juan A; Raman, Subha V; Bickle, Katherine M; Nathan, Nadia S

    2009-01-01

    Left ventricular remodelling leads to functional mitral regurgitation resulting from annular dilatation, leaflet tethering, tenting, and decreased leaflet coaptation. Mitral valve annuloplasty restores valve competency, improving the patient's functional status and ventricular function. This study was designed to evaluate the mechanisms underlying mitral valve competency after the implantation of a Geoform annuloplasty ring using three-dimensional (3D) echocardiography. Seven patients (mean age of 65 years) with ischaemic mitral regurgitation underwent mitral valve annuloplasty with the Geoform ring and coronary artery bypass surgery. Pre- and post-operative 3D echocardiograms were performed. Following mitral annuloplasty, mitral regurgitation decreased from 3.4+/-0.2 to 0.9+/-0.3 (P-value<0.0001), mitral valve tenting volume from 13+/-1.7 to 3.2+/-0.3 mL (P-value<0.001), annulus area from 12.6+/-1.0 to 3.3+/-0.2 cm2 (P-value<0.0001), valve circumference from 13+/-0.5 to 7.3+/-0.3 cm (P-value<0.0001), septolateral distance from 2.1+/-0.1 to 1.4+/-0.06 cm (P-value<0.01) and intercommissural distance from 3.4+/-0.1 to 2.7+/-0.03 cm (P-value<0.03). There was significant decrease in the septolateral distance at the level of A2-P2 with respect to other regions. These geometric changes were associated with the improvement in the NYHA class from 3.1+/-0.3 to 1.3+/-0.3 (P-value<0.002). The mitral valve annuloplasty with the Geoform ring restores leaflet coaptation and eliminates mitral regurgitation by effectively modifying the mitral annular geometry.

  11. Transcatheter pledget-assisted suture tricuspid annuloplasty (PASTA) to create a double-orifice valve.

    Science.gov (United States)

    Khan, Jaffar M; Rogers, Toby; Schenke, William H; Greenbaum, Adam B; Babaliaros, Vasilis C; Paone, Gaetano; Ramasawmy, Rajiv; Chen, Marcus Y; Herzka, Daniel A; Lederman, Robert J

    2018-02-06

    Pledget-assisted suture tricuspid valve annuloplasty (PASTA) is a novel technique using marketed equipment to deliver percutaneous trans-annular sutures to create a double-orifice tricuspid valve. Tricuspid regurgitation is a malignant disease with high surgical mortality and no commercially available transcatheter solution in the US. Two iterations of PASTA were tested using trans-apical or trans-jugular access in swine. Catheters directed paired coronary guidewires to septal and lateral targets on the tricuspid annulus under fluoroscopic and echocardiographic guidance. Guidewires were electrified to traverse the annular targets and exchanged for pledgeted sutures. The sutures were drawn together and knotted, apposing septal and lateral targets, creating a double orifice tricuspid valve. Twenty-two pigs underwent PASTA. Annular and chamber dimensions were reduced (annular area, 10.1 ± 0.8 cm 2 to 3.8 ± 1.5 cm 2 (naïve) and 13.1 ± 1.5 cm 2 to 6.2 ± 1.0 cm 2 (diseased); septal-lateral diameter, 3.9 ± 0.3 mm to 1.4 ± 0.6 mm (naïve) and 4.4 ± 0.4 mm to 1.7 ± 1.0 mm (diseased); and right ventricular end-diastolic volume, 94 ± 13 ml to 85 ± 14 ml (naïve) and 157 ± 25 ml to 143 ± 20 ml (diseased)). MRI derived tricuspid regurgitation fraction fell from 32 ± 12% to 4 ± 5%. Results were sustained at 30 days. Pledget pull-through force was five-fold higher (40.6 ± 11.7N vs 8.0 ± 2.6N, P PASTA reduces annular dimensions and tricuspid regurgitation in pigs. It may be cautiously applied to selected patients with severe tricuspid regurgitation and no options. This is the first transcatheter procedure, to our knowledge, to deliver standard pledgeted sutures to repair cardiac pathology. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

  12. Taking Leave?

    CERN Multimedia

    2000-01-01

    Planning a holiday? Then if you're a member of the personnel, you'll need to use the Laboratory's new leave system that will be put in place on 1 October. Leave allocations don't change - you are entitled to just as much holiday as before - but instead of being credited annually, your leave will be credited on a monthly basis, and this information will be communicated on your salary slip. The reason for the change is that with the various new leave schemes such as Recruitment by Saved Leave (RSL) and the Progressive Retirement Programme (PRP), a streamlined procedure was required for dealing with all kinds of leave. In the new system, each member of the personnel will have leave accounts to which leave will be credited monthly from the payroll and debited each time an absence is registered in the CERN Electronic Document Handling system (EDH). Leave balances will appear on monthly pay slips, and full details of leave transactions and balances will be available through EDH at all times. As the leave will be c...

  13. Is tricuspid annuloplasty increasing surgical mortality and morbidity during mitral valve replacement? A single-centre experience.

    Science.gov (United States)

    Verdonk, Constance; Darmon, Arthur; Cimadevilla, Claire; Lepage, Laurent; Raffoul, Richard; Nataf, Patrick; Vahanian, Alec; Messika-Zeitoun, David

    2017-12-06

    Performance of tricuspid annuloplasty (TA) in patients undergoing mitral valve surgery is recommended based on the degree of tricuspid regurgitation and tricuspid annulus size, but is often underused. To evaluate the impact of combined TA on in-hospital outcome in patients undergoing mitral valve replacement (MVR). We selected all consecutive patients who underwent MVR for native valve disease. Clinical, echocardiographic and in-hospital complications were obtained from chart review. We identified 287 patients (mean age 62±17 years; 44% men). Combined TA was performed in 165 patients (57%), who had more rheumatic disease (71% vs. 24%; P<0.0001) and mitral stenosis (55% vs. 22%; P<0.0001), but less endocarditis (4% vs. 31%; P<0.0001), were more often in atrial fibrillation (54% vs. 22%; P<0.0001), were more severely symptomatic (80% vs. 57%; P<0.0001), presented with a higher systolic pulmonary artery pressure (SPAP) (53±16 vs. 45±15mmHg; P=0.0002) and were less likely to have required emergency surgery (17% vs. 38%; P<0.0001). Despite this higher risk profile, in-hospital mortality was slightly lower (5% vs. 13%; P=0.02) and complication rates were similar (redo surgery 22% vs. 16% [P=0.18] and tamponade 20% vs. 15% [P=0.15]). After adjustment for age, sex, functional class, SPAP, emergency surgery and concomitant coronary artery bypass graft or aortic valve replacement surgery, combined TA was not associated with an increased rate of in-hospital death (P=0.08) or major complications (P=0.89). In a consecutive series of patients who underwent MVR, TA did not seem to have a negative impact on immediate outcome. Hence, additional performance of TA at the time of MVR should not be declined on the basis of an increased surgical risk. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  14. Mitral valve annuloplasty with a bovine pericardial strip - 18-year results Anuloplastia mitral com tira de pericárdio bovino resultados de 18 anos

    Directory of Open Access Journals (Sweden)

    Pablo Maria Alberto Pomerantzeff

    2005-08-01

    Full Text Available PURPOSE: Prosthetic annuloplasty rings are currently used in mitral reconstruction. Posterior annuloplasty with a bovine pericardial strip is a technique largely used in the Heart Institute of University of São Paulo Medical School. The purpose of the study was to analyze the late results of mitral valve repair with posterior annuloplasty using a bovine pericardial strip. METHODS: Between January 1984 and December 2002, 273 patients underwent mitral valve repair with posterior pericardial annuloplasty in the Heart Institute of University of São Paulo Medical School. One hundred and forty four (52.7% were women and ages ranged between 1 and 76 years (38.3 ± 21.1. Rheumatic fever was present in 52.0% of the patients. Associated techniques were employed in 26.0% of the patients, and the most frequent was chordal shortening (9.2%. RESULTS: Hospital mortality was 3.3% (9 patients, with the major cause being low cardiac output (6 patients. Actuarial survival was 55.1% ± 16.8% in 18 years. During the 18-year follow-up: patients were free from the following: reoperation (59.1% ±± 13.9%, (percent +/- Standard Error, thromboembolism (97.4% ± 2.3%, hemolysis (99.2% ± 0.2%, and endocarditis (99.6% ± 1.0%. In the late follow-up period, 83.9% were classified as New York Heart Association functional class I. CONCLUSIONS: Late results with mitral valve repair with posterior annuloplasty using a bovine pericardial strip were satisfactory. The technique is feasible, reproducible, and cost effective.OBJETIVO: Anéis protéticos para anuloplastia são usados nas plásticas da valva mitral de forma rotineira. A anuloplastia posterior com tira de pericárdio bovino é uma técnica largamente utilizada no Instituto do Coração - HC - FMUSP. O objetivo deste estudo foi analisar os resultados tardios da plástica da valva mitral com a utilização desta técnica na nossa instituição. MÉTODOS: Entre janeiro de 1984 e dezembro de 2002, 273 pacientes foram

  15. Early Clinical Outcomes of Tricuspid Valve Repair with a Tri-Ad Annuloplasty Ring in Comparison with the Outcomes Using an MC³ Ring

    Directory of Open Access Journals (Sweden)

    Woohyun Jung

    2018-04-01

    Full Text Available Background: We evaluated the early clinical outcomes of tricuspid valve annuloplasty (TAP with the Tri-Ad annuloplasty ring for functional tricuspid regurgitation (TR. Methods: From January 2015 to March 2017, 36 patients underwent TAP with a Tri-Ad ring for functional TR. To evaluate the early clinical outcomes of TAP with the Tri-Ad ring, we conducted a propensity score-matched analysis comparing the Tri-Ad and MC³ tri-cuspid annuloplasty rings (n=34 in each group. The follow-up duration was 11.0±7.07 months. Results: There was 1 case of operative mortality (2.8% and no cases of late mortality. Postoperative complications occurred in 15 patients (41%, including acute kidney injury in 6 patients (16%, bleeding requiring reoperation in 4 patients (11%, and low cardiac output syndrome in 4 patients (11%. There were no ring-related complications, such as atrioventricular block or ring dehiscence. The TR grade decreased significantly (from 2.03±1.06 to 1.18±0.92, p<0.01, as did the systolic pulmonary artery pressure (from 43.53±13.84 to 38.00±9.72 mm Hg, p=0.03. There were no cases of severe residual TR, but moderate TR was observed in 3 patients, all of whom had severe TR preoperatively. Severe preoperative TR was also associated with moderate in the univariate analysis (p<0.01. In the propensity score-matched analysis comparing the Tri-Ad and MC³ rings, there was no significant difference in early clinical outcomes. Conclusion: TAP with the Tri-Ad ring corrected functional TR effectively and provided good early clinical and echocardiographic results without ring-related complications. However, severe preoperative TR was associated with moderate or severe residual TR in the immediate postoperative period. A follow-up study is necessary to confirm the stability of this procedure.

  16. Parental Leave in Denmark

    DEFF Research Database (Denmark)

    Rostgaard, Tine; Christoffersen, Mogens; Weise, Hanne

    This artcle considders the political aims for different leave schemes and reviews studies af these schemes. The use of parental leave is sensitive to the financial loss involved in taking leave: a decrease in the benefit payments has had a significant influence on take-up, while, in general, fami......, families'' loss of income is less if leave is taken up by the mothers. Only few fathers participate in parental leave....

  17. Goodbye, Mandatory Maternity Leaves

    Science.gov (United States)

    Nation's Schools, 1972

    1972-01-01

    In precedent-setting decrees, courts and federal and State authorities have branded compulsory maternity leaves either unconstitutional or illegal. School administrators are urged to prod boards of education to adopt more lenient maternity leave policies -- now. (Author)

  18. Leaving home in Denmark

    DEFF Research Database (Denmark)

    Nielsen, Rikke Skovgaard

    2015-01-01

    The paper focuses on ethnic differences in the timing and patterns of leaving the parental home. Leaving home is a key transition in the life course of the individual, and extensive research has been conducted on the timing and patterns of leaving it. However, ethnic differences in these patterns...... of leaving home. Results showed that while some differences disappeared when controlling for covariates, others persisted, thus indicating ethnic differences in home-leaving patterns. A strong link between leaving home and marriage was substantiated for Turks, but not for Somalis. The home-leaving patterns...... of Somalis were much more similar to those of Danes. Overall, Turkish descendants were similar to Turkish immigrants but with some differentiation. The analyses identified the existence of ethnic differences in home-leaving patterns but also found evidence of a shift towards less traditional patterns, i...

  19. Minimally invasive mitral valve annuloplasty confers a long-term survival benefit compared with state-of-the-art treatment in heart failure with functional mitral regurgitation.

    Science.gov (United States)

    Penicka, Martin; Kotrc, Martin; Ondrus, Tomas; Mo, Yujing; Casselman, Filip; Vanderheyden, Marc; Van Camp, Guy; Van Praet, Frank; Bartunek, Jozef

    2017-10-01

    Clinical impact of the minimally invasive surgical mitral valve annuloplasty (MVA) of functional mitral regurgitation (FMR) in systolic heart failure on top of the state-of-the-art standards of care remains controversial. Therefore, we aimed to compare clinical outcomes of isolated MVA using the mini-invasive videothoracoscopic approach versus the state-of-the-art (CON=conservative) treatment in patients with chronic systolic heart failure and symptomatic FMR. The study population consisted of 379 patients (age 68.9±11.0years, 62.8% males) with left ventricular (LV) systolic dysfunction, symptomatic FMR and previous heart failure hospitalization. A total of 167 patients underwent undersized MVA and 212 patients were treated conservatively. A concomitant MAZE was performed in 53 (31.7%) patients. In the MVA group, the periprocedural and the 30-day mortality were 1.2% and 4.8%, respectively. During the median follow-up of 7.1years (IQR 3.5-9.8years) a total of 74 (44.3%) and 138 (65.1%) died in the MVA and the CON group, respectively (pstate-of-the-art treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Negative leave balances

    CERN Multimedia

    Human Resources Department

    2005-01-01

    Members of the personnel entitled to annual leave and, where appropriate, saved leave and/or compensatory leave are requested to take note of the new arrangements described below, which were recommended by the Standing Concertation Committee (SCC) at its meeting on 1Â September 2005 and subsequently approved by the Director-General. The changes do not apply to members of the personnel participating in the Progressive Retirement Programme (PRP) or the Part-time Work as a pre-retirement measure, for whom the specific provisions communicated at the time of joining will continue to apply. Â Negative balances in annual leave, saved leave and/or compensatory leave accounts at the end of the leave year (30th September) and on the date on which bonuses are credited to the saved leave account (31st December): Where members of the personnel have a leave account with a negative balance on 30Â September and/or 31Â December, leave will automatically be transferred from one account to another on the relevant dates i...

  1. Negative leave balances

    CERN Multimedia

    Human Resources Department

    2005-01-01

    Members of the personnel entitled to annual leave and, where appropriate, saved leave and/or compensatory leave are requested to take note of the new arrangements described below, which were recommended by the Standing Concertation Committee (SCC) at its meeting on 1 September 2005 and subsequently approved by the Director-General. The changes do not apply to members of the personnel participating in the Progressive Retirement Programme (PRP) or the Part-time Work as a pre-retirement measure, for whom the specific provisions communicated at the time of joining will continue to apply.  Negative balances in annual leave, saved leave and/or compensatory leave accounts at the end of the leave year (30th September) and on the date on which bonuses are credited to the saved leave account (31st December): Where members of the personnel have a leave account with a negative balance on 30 September and/or 31 December, leave will automatically be transferred from one account to another on the relevant dates in or...

  2. The Temporary Leave Dilemma -

    DEFF Research Database (Denmark)

    Amilon, Anna

    2010-01-01

    Lone mothers have to take care of a sick child with little or no help from the child’s other parent and have to carry all costs connected to leave-taking. This paper empirically tests whether lone mothers take more temporary parental leave to care for sick children than partnered mothers...... and whether parental leave is associated with a signaling cost. The results from this study of Swedish mothers show that lone mothers use more temporary parental leave than partnered mothers. Further, within the group of lone mothers, those with higher socioeconomic status take less temporary parental leave...... than those with lower socioeconomic status, whereas no such differences are found within the group of partnered mothers. One possible interpretation is that signaling costs negatively influence the utilization of temporary parental leave for lone mothers....

  3. The benefits of the Atlas of Human Cardiac Anatomy website for the design of cardiac devices.

    Science.gov (United States)

    Spencer, Julianne H; Quill, Jason L; Bateman, Michael G; Eggen, Michael D; Howard, Stephen A; Goff, Ryan P; Howard, Brian T; Quallich, Stephen G; Iaizzo, Paul A

    2013-11-01

    This paper describes how the Atlas of Human Cardiac Anatomy website can be used to improve cardiac device design throughout the process of development. The Atlas is a free-access website featuring novel images of both functional and fixed human cardiac anatomy from over 250 human heart specimens. This website provides numerous educational tutorials on anatomy, physiology and various imaging modalities. For instance, the 'device tutorial' provides examples of devices that were either present at the time of in vitro reanimation or were subsequently delivered, including leads, catheters, valves, annuloplasty rings and stents. Another section of the website displays 3D models of the vasculature, blood volumes and/or tissue volumes reconstructed from computed tomography and magnetic resonance images of various heart specimens. The website shares library images, video clips and computed tomography and MRI DICOM files in honor of the generous gifts received from donors and their families.

  4. Clinical Efficacy and Its Prognostic Factor of Percutaneous Endoscopic Lumbar Annuloplasty and Nucleoplasty for the Treatment of Patients with Discogenic Low Back Pain.

    Science.gov (United States)

    Lee, Jung Hwan; Lee, Sang-Ho

    2017-09-01

    The choice of appropriate treatment of discogenic low back pain (DLBP) frequently is difficult. This study sought to identify the clinical efficacy of percutaneous endoscopic lumbar annuloplasty and nucleoplasty (PELAN) to treat patients with DLBP and to investigate prognostic clinical or radiologic variables. Eighty-nine patients with a diagnosis of DLBP who underwent PELAN were included. Numeric Rating Scale (NRS) for back pain, Oswestry Disability Index % (ODI%), and modified Macnab criteria were measured at short-term (3-4 weeks) and long-term follow-up period (at least 12 months) to investigate clinical efficacy of PELAN. The subjects were defined as successful group in case of 50% or more reduction of NRS, 40% or more reduction of ODI%, and good or excellent response of Macnab criteria. Clinical and radiologic variables were compared between successful and unsuccessful outcomes group to determine prognostic variables. NRS and ODI% were significantly reduced at short- and long-term follow-up after PELAN. Sixty-two (69.7%) and 68 (76.4%) obtained successful NRS reduction and 59 (66.3%) and 68 (76.4%) accomplished successful ODI% reduction at short-term and long-term follow-up, respectively. Successful Mcnab response was found in 61% at short term and 65.2% at long term. Pain during waist flexion among clinical variables was significantly related to good clinical outcomes and Modic change among radiologic variables was significantly related to poor clinical outcomes. PELAN provided favorable outcomes in patients with DLBP who were refractory to conservative treatments. Flexion pain was good prognostic, and Modic change was a poor prognostic variable. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Transplante cardíaco com anastomose bicaval e anuloplastia tricúspide profilática no enxerto Cardiac transplantation with bicaval anastomosis and prophylactic graft tricuspid annuloplasty

    Directory of Open Access Journals (Sweden)

    Alfredo Inácio Fiorelli

    2008-03-01

    Full Text Available OBJETIVO: O presente estudo tem por objetivo avaliar os efeitos da anuloplastia tricúspide profilática no coração doador em transplante cardíaco com anastomose bicaval. MÉTODOS: De 2002 a 2005, foram selecionados de forma não aleatória 20 pacientes submetidos ao transplante cardíaco pela técnica bicaval e com sobrevida superior a seis meses. Eles foram divididos em dois grupos: Grupo I - 10 pacientes que receberam coração doador com anuloplastia tricúspide profilática, pela técnica de De Vega; e Grupo II - 10 pacientes que não receberam a anuloplastia, ambos com características semelhantes. O grau de regurgitação tricúspide foi avaliado pela ecocardiografia transtorácica com Doppler e foi quantificado entre 0 e 3 (0=ausente, 1=discreto, 2=moderado, 3=grave. O desempenho miocárdico foi avaliado pela fração de ejeção ventricular e pelo estudo hemodinâmico invasivo, durante as biópsias endomiocárdicas de rotina. RESULTADOS: O período médio de observação foi de 14,6±4,3 meses (6 e 16 meses. Houve apenas um óbito no grupo II não relacionado à anuloplastia. O grau médio de regurgitação tricúspide no Grupo I foi de 0,4±0,6 e no Grupo II foi de 1,6±0,8 (p OBJECTIVE: This study aims to evaluate the effects of prophylactic heart donor tricuspid annuloplasty in patients after heart transplantation with bicaval anastomosis. METHODS: From 2002 to 2005, 20 patients undergoing heart transplantation with bicaval anastomosis and with a survival rate over 6 months were deliberately selected. Patients were divided into two groups: Group I - 10 patients who underwent prophylactic heart donor tricuspid annuloplasty by the De Vega technique; and Group II - 10 patients did not undergo annuloplasty. In both groups, presurgical clinical characteristics were the same. The tricuspid regurgitation degree was evaluated by transthoracic Doppler echocardiography and it was qualified from 0 to 3 (0=absent, 1=mild, 2=moderated, 3

  6. Falling for Clay Leaves.

    Science.gov (United States)

    Kernan, Christine

    2002-01-01

    Describes an art project that integrated science and art education. Explains that students create ceramic bowls by using real leaves. Discusses the process of creating the ceramic bowls, including how to glaze the bowls. Includes a list of materials. (CMK)

  7. Maternity Leave Policies

    Science.gov (United States)

    Strang, Lucy; Broeks, Miriam

    2017-01-01

    Abstract Over recent years many European Union countries have made changes to the design of the maternity leave provision. These policy developments reflect calls for greater gender equality in the workforce and more equal share of childcare responsibilities. However, while research shows that long period of leave can have negative effects on women's labour market attachment and career advancements, early return to work can be seen as a factor preventing exclusive breastfeeding, and therefore, potentially having negative health impacts for babies. Indeed, the World Health Organisation recommends exclusive breastfeeding up to 6 months of age to provide babies with the nutrition for healthy growth and brain development, protection from life-threatening ailments, obesity and non-communicable diseases such as asthma and diabetes. Therefore, labour market demands on women may be at odds with the health benefits for children gained by longer periods of maternity leave. The aim of this article is to examine the relationship between leave provision and health benefits for children. We examine maternity and parental leave provision across European countries and its potential impact on the breastfeeding of very young babies (up to 6-months of age). We also consider economic factors of potential extension of maternity leave provision to 6 months, such as costs to businesses, effects on the female labour market attachment, and wider consequences (benefits and costs) for individuals, families, employers and the wider society. PMID:28983432

  8. Anuloplastia sem suporte para tratamento da insuficiência mitral reumática Non-supported mitral annuloplasty technique for treatment of rheumatic mitral insufficiency

    Directory of Open Access Journals (Sweden)

    Renato A. K Kalil

    1992-09-01

    sem suporte anular profético, com resultados tardios comparáveis àqueles obtidos por técnicas mais complexas. Isto tem importância no tratamento de crianças e adultos jovens, especialmente no sexo feminino, quando se deseja evitar implante de próteses mecânicas.Since 1974 a non-supported mitral annuloplasty technique has been employed for treatment of pure mitral regurgitation (PMR, in a population that was predominantly young and of rheumatic ethnology. An evaluation of late results forms the basis of this report. There were 154 patients operated on for PMR, 55 (36% male and 99 (64% female. Mean age was 36 ± 16 (5 to 73 years. Associated lesions were: 47 aortic, 21 tricuspid and 2 ASDs (atrial aptal defects. Cases with concomitant mitral stenosis were not included. Properative functional class was I-II in 19% and III-IV in 81%. The cardiothoracic ratio was 0.61 ± 0.10. All patients were submitted to an unsupported mitral annuloplastic procedure, similar to that described by WOOLER, that consisted in reduction of the mural portion of the annulus obtained with the application of two buttressed mattress sutures at the comissures without compromisse to the width of the septal leaflet. When necessary, additional chordal procedures were performed. No patients received ring or posterior annular support. Residual late systolic murmur was present in 48%. Late complications were: systemic thromboembolism 5.8% (1/3 with aortic prosthesis, infective endocardites 1.3% and pulmonary thromboembolism 0.7%. Postoperative functional class was I-II in 84% and III-IV in 16%. Cardiothoracic ratio was 0.58 ± 0.10. Actuarial probability of late survival was 79.5 ± 5.3% at 10 years and 71.0 ± 7.4% at 14 years. Event free survival was 67.9 ± 8.9% at 10 years and 56.1 ± 11.7% at 14 years. Rheumatic mitral regurgitation can be effectively treated by annuloplasty without prosthetic annular support with late results comparable to those obtained with more complicated procedures

  9. TRAVEL AND HOME LEAVE

    CERN Multimedia

    Human Resources Division

    2002-01-01

    Administrative procedures for : Travel to the home station and home leave (hl) Additional travel to the home station (at) Travel to the home station and home leave for family reasons (hlf) As part of the process of simplifying administrative procedures, HR and AS Divisions have devised a new, virtually automatic procedure for payment of travel expenses to the home station. The changes are aimed at rationalising administrative procedures and not at reducing benefits. The conditions of eligibility are unchanged. The new procedure, which will be operational with effect from 1st June 2002, will greatly simplify the administrative processing of claims for travel expenses and the recording of home leaves. Currently, requests for payment are introduced manually into the Advances and Claims system (AVCL) by divisional secretariats. All travel to the home station starting prior to 1st June 2002 will be processed according to the existing system whereas that starting on 1st June and after will be processed accordi...

  10. Does Leave Work?

    NARCIS (Netherlands)

    Heleen van Luijn; Saskia Keuzenkamp

    2004-01-01

    More and more people have to combine work and care responsibilities, and work part-time or use daycare and after-school care facilities to help them do so. The Work and Care Act, which came into force on 1 December 2001, combined all the existing schemes - such as parental and maternity leave -

  11. Maternity Leave in Taiwan

    Science.gov (United States)

    Feng, Joyce Yen; Han, Wen-Jui

    2010-01-01

    Using the first nationally representative birth cohort study in Taiwan, this paper examines the role that maternity leave policy in Taiwan plays in the timing of mothers returning to work after giving birth, as well as the extent to which this timing is linked to the amount of time mothers spend with their children and their use of breast milk…

  12. REMINDER: Saved Leave Scheme (SLS)

    CERN Multimedia

    2003-01-01

    Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

  13. Proton therapy device

    International Nuclear Information System (INIS)

    Tronc, D.

    1994-01-01

    The invention concerns a proton therapy device using a proton linear accelerator which produces a proton beam with high energies and intensities. The invention lies in actual fact that the proton beam which is produced by the linear accelerator is deflected from 270 deg in its plan by a deflecting magnetic device towards a patient support including a bed the longitudinal axis of which is parallel to the proton beam leaving the linear accelerator. The patient support and the deflecting device turn together around the proton beam axis while the bed stays in an horizontal position. The invention applies to radiotherapy. 6 refs., 5 figs

  14. Employer Provisions for Parental Leave.

    Science.gov (United States)

    Meisenheimer, Joseph R., II

    1989-01-01

    Slightly more than one-third of full-time employees in medium and large firms in private industry were covered by maternity- or paternity-leave policies; days off were usually leave without pay. (Author)

  15. REMINDER Saved Leave Scheme (SLS) : Transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2002-01-01

    Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'*) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that, since last year, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2002 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they are still participants in the schem...

  16. Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2) annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No. 22 B) can be transferred to the saved leave account at the end of the leave year (30 September). Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the ...

  17. Parental leave and child health.

    Science.gov (United States)

    Ruhm, C J

    2000-11-01

    This study investigates whether rights to parental leave improve pediatric health. Aggregate data are used for 16 European countries over the 1969 through 1994 period. More generous paid leave is found to reduce deaths of infants and young children. The magnitudes of the estimated effects are substantial, especially where a causal effect of leave is most plausible. In particular, there is a much stronger negative relationship between leave durations and post-neonatal or child fatalities than for perinatal mortality, neonatal deaths, or low birth weight. The evidence further suggests that parental leave may be a cost-effective method of bettering child health.

  18. The prevalence of sick leave

    DEFF Research Database (Denmark)

    Backhausen, Mette; Damm, Peter; Bendix, Jane

    2018-01-01

    of long-term sick leave. Method Data from 508 employed pregnant women seeking antenatal care was collected by questionnaires from August 2015 to March 2016. The questionnaires, which were filled in at 20 and 32 weeks of gestation, provided information on maternal characteristics, the number of days spent...... on sick leave and the associated reasons. Descriptive statistics and logistic regression analysis were applied. Results The prevalence of sick leave was 56% of employed pregnant women in the first 32 weeks of gestation and more than one in four reported long-term sick leave (>20 days, continuous...... was a negative predictor. Conclusions The prevalence of sick leave was 56% in the first 32 weeks of gestation and more than one in four women reported long-term sick leave. The majority of reasons for sick leave were pregnancy-related and low back pain was the most frequently given reason....

  19. Paid Family Leave, Fathers' Leave-Taking, and Leave-Sharing in Dual-Earner Households

    OpenAIRE

    Bartel, Ann P.; Rossin-Slater, Maya; Ruhm, Christopher J.; Stearns, Jenna; Waldfogel, Jane

    2015-01-01

    This paper provides quasi-experimental evidence on the impact of paid leave legislation on fathers' leave-taking, as well as on the division of leave between mothers and fathers in dual-earner households. Using difference-in-difference and difference-in-difference-in-difference designs, we study California's Paid Family Leave (CA-PFL) program, which is the first source of government-provided paid parental leave available to fathers in the United States. Our results show that fathers in Califo...

  20. Paid Family Leave, Fathers' Leave-Taking, and Leave-Sharing in Dual-Earner Households.

    Science.gov (United States)

    Bartel, Anne P; Rossin-Slater, Maya; Ruhm, Christopher J; Stearns, Jenna; Waldfogel, Jane

    Using difference-in-difference and difference-in-difference-in-difference designs, we study California's Paid Family Leave (CA-PFL) program, the first source of government-provided paid parental leave available to fathers in the Unites States. Relative to the pre-treatment mean, fathers of infants in California are 46 percent more likely to be on leave when CA-PFL is available. In households where both parents work, we find suggestive evidence that CA-PFL increases both father-only leave-taking (i.e., father on leave while mother is at work) and joint leave-taking (i.e., both parents on leave at the same time). Effects are larger for fathers of first-born children than for fathers of later-born children.

  1. [Precautionary maternity leave in Tirol].

    Science.gov (United States)

    Ludescher, K; Baumgartner, E; Roner, A; Brezinka, C

    1998-01-01

    Under Austrian law, precautionary maternity leave is a decree issued by the district public health physician. It forbids a pregnant woman to work and mandates immediate maternity leave. Regular maternity leave for all women employed in all jobs begins at 32 weeks of gestation. Women who work in workplaces deemed dangerous and women with a history of obstetric problems such as premature or growth-retarded babies from previous pregnancies are regularly 'sent' into precautionary maternity leave. The public health physicians of Tirol's nine administrative districts were interviewed and supplied data on precautionary maternity leave from their districts. In 100 women who attended the clinic for pregnancies at risk of the Obstetrics/Gynecology Department of Innsbruck University Hospital and who had already obtained precautionary maternity leave, the medical/administrative procedure was studied in each case and correlated with pregnancy outcome. The town district of Innsbruck and the district that comprises the suburbs of the provincial capital had the highest rates of precautionary maternity leave. The town district of Innsbruck had a rate of 24.3% of all pregnant women (employed and not employed) in precautionary maternity leave in 1997, whereas the whole province of Tirol had 13.4%. More than 80% of decrees for precautionary maternity leave are issued by district public health physicians on the basis of written recommendations from gynecologists. One third of women who are sent into precautionary maternity leave are issued the decree prior to 12 weeks of gestation - mostly cases of multiple pregnancies and women with previous miscarriages. The present system of precautionary maternity leave appears to work in the sense that most working pregnant women with risk factors are correctly identified - with most errors on the side of caution. As the system also helps employers - the employee's pay is paid from the federal family support fund and state insurance once she is in

  2. Parental Leave Policies and Parents' Employment and Leave-Taking

    Science.gov (United States)

    Han, Wen-Jui; Ruhm, Christopher; Waldfogel, Jane

    2009-01-01

    We describe trends in maternal employment and leave-taking after birth of a newborn and analyze the extent to which these behaviors are influenced by parental leave policies. Data are from the June Current Population Survey (CPS) Fertility Supplements, merged with other months of the CPS, and cover the period 1987 to 1994. This time span is one…

  3. Resultado clínico tardio da anuloplastia mitral sem suporte em crianças e adolescentes Late outcome of unsupported annuloplasty as surgical treatment of mitral insufficiency in children and adolescents

    Directory of Open Access Journals (Sweden)

    Solange Bordignon

    1996-12-01

    sem suporte anular profético, com resultados tardios comparáveis àqueles obtidos por técnicas mais complexas. Isto tem importância no tratamento de crianças e adultos jovens, especialmente no sexo feminino, quando se deseja evitar o implante de próteses mecânicas.Late post-operative clinical results fortreatmentof mitral regurgitation (MR in patients under 18 years-old by annuloplasty without ring or posterior support are presented. From 1977 to 1995,70 patients: 36 female and 34 male, mean age 12.4 ± 4.8 y (6m to 18y, with pure MR were submitted to an Wooler type of annuloplasty. None received ring or annular support. Twelve (17.1% had chordal shortening associated. Ethiology was rheumatic 71.4%, congenital 18.6%, myxomatous 8.6% and infectious 1.4%. Preoperative functional class was II: 32 cases (45.7%, III: 18 (25.7%, IV: 20 (28.6%. Twenty-one patients (30% had associated procedures: on aortic valve 12 (15.2%, tricuspid 4 (5.7%, ASD 4 (5.7% and aortic and tricuspid 1 (1.4%. Mean perfusion time was 45.2 ± 18.3 min for the whole group and 37.2 ± 11.3 min for annuloplasty alone. Mean ischemic time was 28.4 ± 14.3 min and 21.8 ± 7.1 min respectively. Follow-up time ranged from 7 months to 18 years. Mortality was 4.3% (3 cases in the early postoperative and 8.6% (6 cases in the late follow up. Early residual regurgitation was found in 15 patients (21.4% and 50.0% in 35. Thirteen (18.6% were reoperated at a mean p.o. time of 56.2 ± 46.2 m. Causes for reoperation: primary MR 5 (38.5%, endocarditis 4 (30.7%, stenosis 2 (15.4%, aortic valve disfunction 1 (7.7%, pulmonary embolism 1 (7.7%. Late evaluation in 46 non-operated survivors: 34 were in functional class I (73.9%, 10 in II (21.7% and 2 in III (4.3%. Actuarial survival was 93 ± 3% at 5 years and 80 ± 7% at 10 years. Event-free survival was 89 ± 4% and 61 ± 10% at 5 and 10 years. For rheumatic ethiology, event-free survival was 80 ± 8% and 55 ± 16% and, for congenital MR, 90 ± 9% at 5 and 10 years

  4. REMINDER Saved Leave Scheme (SLS) : Simplified procedure for the transfer of leave to saved leave accounts

    CERN Multimedia

    HR Division

    2001-01-01

    As part of the process of streamlining procedures, the HR and AS Divisions have jointly developed a system whereby annual and compensatory leave will henceforth be automatically transferred1) to saved leave accounts. Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'2)Previously, every person taking part in the scheme has been individually issued with a form for the purposes of requesting the transfer of leave to the leave account and the transfer has then had to be done manually by HR Division. To streamline the procedure, unused leave of all those taking part in the saved leave scheme at the closure of the leave-year accounts will henceforth be transferred automatically to the saved leave account on that date. This simplification is in the interest of all parties concerned. This automatic transfer procedure has a number of advantages for participants in the SLS scheme. First, staff members will no longer have to take any administrative steps. Secondly, the new proced...

  5. Negotiating leave in the workplace

    DEFF Research Database (Denmark)

    Bloksgaard, Lotte

    In Denmark leave entitlement is not only regulated by law but is also part of the various collective agreements established in the respective occupational sectors and at the local workplace level. Consequently, Danish fathers have very different leave entitlements, depending on the sector, branch...

  6. Negotiating leave in the workplace

    DEFF Research Database (Denmark)

    Bloksgaard, Lotte

    2014-01-01

    In Denmark leave entitlement is not only regulated by law but is also part of the various collective agreements established in the respective occupational sectors and at the local workplace level. Consequently, Danish fathers have very different leave entitlements, depending on the sector, branch...

  7. 5 CFR 630.1204 - Intermittent leave or reduced leave schedule.

    Science.gov (United States)

    2010-01-01

    ... insurance, health benefits, retirement coverage, and leave accrual). (e) The agency shall determine the... REGULATIONS ABSENCE AND LEAVE Family and Medical Leave § 630.1204 Intermittent leave or reduced leave schedule... reduced leave schedule unless the employee and the agency agree to do so. (b) Leave under § 630.1203(a) (3...

  8. New statement of leave format

    CERN Multimedia

    HR Department

    2009-01-01

    Following the communication of the Standing Concertation Committee published in Weekly Bulletin No. 18-19 of 27 April 2009, the current statement of leave on monthly pay slips has been replaced with the EDH Leave Transactions report that displays the up-to-date situation of individual leave balances at all times. The report is available on EDH. Additionally, the layout of the pay slip has been modernised. The new version of the pay slip will be send out from September 2009 onwards. Finance and Purchasing Department, Personnel Accounting Human Resources Department, Organisation and Procedures General Infrastructure Services Department, Administrative Information Services

  9. Leaves of Absence. School Law Summary.

    Science.gov (United States)

    National Education Association, Washington, DC. Research Div.

    This report contains State-by-State statutory summaries on three types of leaves of absence relating to teachers -- sick leave, maternity leave, and sabbatical leave. Only State laws that have specific reference to one of these three types of leaves of absence are included. Not included are those statutes granting boards of education the general…

  10. Chitinase from phaseolus vulgaris leaves

    International Nuclear Information System (INIS)

    Boller, T.; Gehri, A.; Mauch, F.; Vogeli, V.

    1988-01-01

    This paper examines the effect of ethylene on chitinase activity in bean leaves. The authors have purified the enzyme in the course of their work. The purification method is detailed and the colorimetric and radiochemical assays are compared

  11. The Problems of Parental Leave.

    Science.gov (United States)

    Price, Sean

    2017-10-01

    The United States is the only major industrialized country in the world to not require paid parental leave. Numerous studies have shown that allowing parents time with a newborn makes the child and the parents healthier, both physically and mentally. Many physicians, especially those who work in practices with five or fewer doctors, worry about how to pay for parental leave for themselves and their staff.

  12. Anuloplastia de homoenxerto pulmonar criopreservado com anel de Delrin na atresia pulmonar com comunicação interventricular Annuloplasty of cryopreserved pulmonary homograft with Delrin stent in pulmonary atresia with ventricular septal defect

    Directory of Open Access Journals (Sweden)

    Ulisses Alexandre Croti

    2007-05-01

    Full Text Available Criança de seis anos portadora de atresia pulmonar com comunicação interventricular, submetida a correção total com um ano, empregando monoválvula de pericárdio bovino na reconstrução da via de saída do ventrículo direito. Evoluiu com importante regurgitação valvar pulmonar (RVP e disfunção do ventrículo direito. Na reoperação foi implantado homoenxerto pulmonar criopreservado (HPC com anuloplastia, utilizando anel de Delrin com o intuito de evitar distorção geométrica do conduto. Após dois anos, o ecocardiograma, semelhante ao pós-operatório imediato, demonstra RVP discreta e função ventricular direita normal, sugerindo que essa manobra pode ser utilizada como coadjuvante para otimizar o resultado do implante do HPC.A six-year-old child was suffering from pulmonary atresia with ventricular septal defect after a total correction at 1 year of age using a bovine pericardial monocusp valve in the reconstruction of the right ventricle outflow tract. The infant evolved with significant pulmonary valve regurgitation (PVR and right ventricle dysfunction. On reoperation, a cryopreserved pulmonary homograft (CPH was implanted with annuloplasty utilizing a Delrin ring with the aim of avoiding geometric distortion of the vessel. After two years, an echocardiogram proved a similar state to the immediate postoperative period with slight pulmonary valve regurgitation and normal right ventricular function suggesting that this maneuver may be used as coadjuvant treatment to optimize the result of CPH implantation.

  13. [Disability leave and sick leave in Spain. 2016 legislative update].

    Science.gov (United States)

    Vicente-Herrero, María Teófila; Terradillos-García, María Jesús; Capdevila-García, Luisa M; Ramírez-Íñiguez de la Torre, María Victoria; Aguilar-Jiménez, Encarna; Aguado-Benedí, María José; López-González, Angel Arturo; Torres-Alberich, José Ignacio

    2018-01-01

    In Spanish, the concepts of discapacidad (disability leave) and incapacidad (sick leave) jointly refer to the impairment of a person due to injuries, diseases or deficiencies that limit their activity in a social, personal or occupational field. However, this common link does not imply that both concepts are the same. Statistical data from INE (Instituto Nacional de Estadística: Statistic National Institute) show that Spain had in 2015 3.85 million persons with a disability (59.8% were women). Statistical data from 2015 from INSS (Instituto Nacional de Seguridad Social: Social Security National Institute) show high levels in the number of processes and in workers affected by temporary sick leave, with social costs to the social security system. Both concepts have been updated: about disability leave, Law 39/2006 adjusted terminology by avoiding the use of concepts with discriminating or pejorative connotation. Regarding sick leave, the Ley General de Seguridad Social (General Social Security Law)has been amended and came into effect in January, 2016. It is necessary to know and distinguish these aspects for a better administrative management, and a more oriented information to the affected patient.

  14. Why People Leave Their Jobs?

    Directory of Open Access Journals (Sweden)

    Luis R. Domínguez A.

    2014-12-01

    Full Text Available This article aims to show the results of the review of literature of relevant studies of the causal elements of intention to leave in the last five years (2009-2013. The method used to evaluate the literature was based on the seven steps for research synthesis: problem formulation, literature search, obtaining information from studies, quality assessment studies, analysis and integration of results, interpretation of evidence and presentation of results. 48 studies from 15 different countries with a sample of 35804 employees of different companies were evaluated. The findings suggest the existence of 89 different variables influencing the intention to leave of employees in an organization. The results of this study will allow researchers to better understand the variables that can be studied to verify the impact of variables such as causal elements, but also see those that have a mediating effect between them for predicting intention to leave as an element of employee turnover. This study makes three important contributions to literature of turnover. First, in this study all the parameters associated with the intention to leave were checked. Second, this study categorizes and displays in proportion relevant interests to the scientific community whom studying employee turnover across the intention to leave. And thirdly provides clues organizations to improve some of its structural and contextual features to control turnover.

  15. Parental leave: the impact of recent legislation on parents' leave taking.

    Science.gov (United States)

    Han, Wen-Jui; Waldfogel, Jane

    2003-02-01

    We use data from the Survey of Income and Program Participation to examine the impact of leave entitlements on unpaid leave usage by men and women after the birth of a child from 1991 to 1999. The results indicate that legislation providing the right to unpaid leave has not affected men's leave usage. The results for women are mixed: in some specifications, leave entitlements are associated with increased leave taking or longer leaves, but the results depend on how we define leave coverage. Our results point to the limited impact of unpaid leave policies and the potential importance of paid-leave policies.

  16. An Evaluation of Paid Leave

    DEFF Research Database (Denmark)

    Albæk, Karsten

    This paper analyzes a labor market program which enables workers to leave employment temporarily with a compensation financed by the taxpayers. The main aim of the program was to increase the chances of the unemployed finding a job. However, the empirical analysis reveals a clear negative...... relationship between the unemployment rate and transition rates from employment into the paid leave scheme. Program participation is low, precisely in those labor market states, where the scheme has a potential to perform as a remedy by increasing the transition rate from unemployment to employment. Several...

  17. Watch out for the leaves!

    CERN Multimedia

    HSE Unit

    2013-01-01

    Now that autumn is here, dead leaves falling from the trees form a colourful carpet that is pleasing to the eye. However, the reality is less pleasant for pedestrians, since these leaves increase the risk of slipping and falling, especially when the ground is wet.   These conditions are also hazardous for two- and four-wheeled vehicles, whose grip on the ground can be severely reduced, thereby increasing the risk of them skidding out of control. Cyclists are among the most vulnerable road users when faced with these hazards. It is therefore essential to be alert to the dangers, which can be lessened by taking a few simple precautions such as moderating your speed and wearing suitable shoes. We also invite you to notify the Service Desk if you notice a road or pavement where there is a high concentration of dead leaves. The CERN Roads and Drainage Service will then ensure that the leaves are cleared in order to reduce the risk of accidents in the area.

  18. Nutrient resorption from seagrass leaves

    NARCIS (Netherlands)

    Stapel, J.; Hemminga, M.A.

    1997-01-01

    The resorption of nutrients (C, N and P) from senescent leaves of six seagrass species from nine different locations in tropical (Indonesia and Kenya), Mediterranean (Spain) and temperate (The Netherlands) regions has been investigated. Resorption was quantitatively assessed by calculating the

  19. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  20. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-06-02

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  1. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  2. 29 CFR 825.202 - Intermittent leave or reduced leave schedule.

    Science.gov (United States)

    2010-07-01

    ... leave schedule is a leave schedule that reduces an employee's usual number of working hours per workweek, or hours per workday. A reduced leave schedule is a change in the employee's schedule for a period of... 29 Labor 3 2010-07-01 2010-07-01 false Intermittent leave or reduced leave schedule. 825.202...

  3. Leaving Moderate Tricuspid Valve Regurgitation Alone at the Time of Pulmonary Valve Replacement: A Worthwhile Approach.

    Science.gov (United States)

    Kogon, Brian; Mori, Makoto; Alsoufi, Bahaaldin; Kanter, Kirk; Oster, Matt

    2015-06-01

    Pulmonary valve disruption in patients with tetralogy of Fallot and congenital pulmonary stenosis often results in pulmonary insufficiency, right ventricular dilation, and tricuspid valve regurgitation. Management of functional tricuspid regurgitation at the time of subsequent pulmonary valve replacement remains controversial. Our aims were to (1) analyze tricuspid valve function after pulmonary valve replacement through midterm follow-up and (2) determine the benefits, if any, of concomitant tricuspid annuloplasty. Thirty-five patients with tetralogy of Fallot or congenital pulmonary stenosis were analyzed. All patients had been palliated in childhood by disrupting the pulmonary valve, and all patients had at least moderate tricuspid valve regurgitation at the time of subsequent pulmonary valve replacement. Preoperative and serial postoperative echocardiograms were analyzed. Pulmonary and tricuspid regurgitation, along with right ventricular dilation and dysfunction were scored as 0 (none), 1 (mild), 2 (moderate), and 3 (severe). Right ventricular volume and area were also calculated. Comparisons were made between patients who underwent pulmonary valve replacement alone and those who underwent concomitant tricuspid valve annuloplasty. At 1 month after pulmonary valve replacement, there were significant reductions in pulmonary valve regurgitation (mean 3 vs 0.39, p tricuspid valve regurgitation (mean 2.33 vs 1.3, p tricuspid regurgitation 1 month postoperatively between patients who underwent concomitant tricuspid annuloplasty and those who underwent pulmonary valve replacement alone (mean 1.31 vs 1.29, p = 0.81). However, at latest follow-up (mean 7.0 ± 2.8 years), the degree of tricuspid regurgitation was significantly higher in the concomitant annuloplasty group (mean 1.87 vs 1.12, p = 0.005). In patients with at least moderate tricuspid valve regurgitation, significant improvement in tricuspid valve function and right ventricular size occurs in the first

  4. Sealing device

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  5. Microfluidic Device

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

    2017-01-01

    Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

  6. Gauging device

    International Nuclear Information System (INIS)

    Qurnell, F.D.; Patterson, C.B.

    1979-01-01

    A gauge supporting device for measuring say a square tube comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a compression member or members. The tensioned guides provide planes of reference for measuring devices moved therealong on a carriage. The device is especially useful for making on site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (UK)

  7. Leaving the hospital - your discharge plan

    Science.gov (United States)

    ... patientinstructions/000867.htm Leaving the hospital - your discharge plan To use the sharing features on this page, ... once you leave. This is called a discharge plan. Your health care providers at the hospital will ...

  8. Childcare and the division of parental leave

    OpenAIRE

    Norén, Anna

    2015-01-01

    Despite several policies aimed at increasing fathers' participation in the caring of children, Swedish mothers still use the bulk of the paid parental leave which may have several negative consequences for the family e.g. in terms of weaker labor market attachment for the mother. Division of parental leave is likely affected by how parents value the costs associated with parental leave. I investigate whether a reduction in the care burden, or a decreased non-monetary cost, of parental leave t...

  9. Fusion devices

    International Nuclear Information System (INIS)

    Fowler, T.K.

    1977-01-01

    Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included

  10. BRAKE DEVICE

    Science.gov (United States)

    O'Donnell, T.J.

    1959-03-10

    A brake device is described for utilization in connection with a control rod. The device comprises a pair of parallelogram link mechanisms, a control rod moveable rectilinearly therebetween in opposite directions, and shoes resiliently supported by the mechanism for frictional engagement with the control rod.

  11. The CCCTB Rules on Leaving a Group

    NARCIS (Netherlands)

    van de Streek, J.

    2012-01-01

    The consolidation system proposed in the draft of the CCCTB Directive puts relationships between Member States on edge. This is clearly apparent in the rules that apply when a company leaves a group. In this article the leaving rules are examined. Although the leaving rules are claimed to be

  12. Sugar beet leaves for functional ingredients

    NARCIS (Netherlands)

    Tamayo Tenorio, Angelica

    2017-01-01

    Plant leaves are recognised as a potential source for food applications based on their nutritional profile and interesting technological properties of leaf components, and based on the large availability of plant leaves in agricultural waste streams. Besides proteins, leaves have a rich

  13. Compassionate Care Leave & Benefits. CAUT Briefing Note

    Science.gov (United States)

    Canadian Association of University Teachers, 2016

    2016-01-01

    Compassionate care leave and benefits were introduced in 2003/04 to help employees cope with this difficult work-life balance challenge. Employment Standards legislation and the Employment Insurance program (EI) were amended to provide leave without pay, with payment of EI benefits for compassionate care leave. Collective agreements have been…

  14. On the Sharing of Temporary Parental Leave

    DEFF Research Database (Denmark)

    Amilon, Anna

    2007-01-01

    This paper views temporary parental leave (leave from work to take care of a sick child) as a household public good, produced with time inputs of the parents as the only input. Assuming equal productivities in the production of temporary parental leave and equal utility functions of the spouses...

  15. PLASMA DEVICE

    Science.gov (United States)

    Gow, J.D.; Wilcox, J.M.

    1961-12-26

    A device is designed for producing and confining highenergy plasma from which neutrons are generated in copious quantities. A rotating sheath of electrons is established in a radial electric field and axial magnetic field produced within the device. The electron sheath serves as a strong ionizing medium to gas introdueed thereto and also functions as an extremely effective heating mechanism to the resulting plasma. In addition, improved confinement of the plasma is obtained by ring magnetic mirror fields produced at the ends of the device. Such ring mirror fields are defined by the magnetic field lines at the ends of the device diverging radially outward from the axis of the device and thereafter converging at spatial annular surfaces disposed concentrically thereabout. (AFC)

  16. Resource capture by single leaves

    Energy Technology Data Exchange (ETDEWEB)

    Long, S.P.

    1992-05-01

    Leaves show a variety of strategies for maximizing CO{sub 2} and light capture. These are more meaningfully explained if they are considered in the context of maximizing capture relative to the utilization of water, nutrients and carbohydrates reserves. There is considerable variation between crops in their efficiency of CO{sub 2} and light capture at the leaf level. Understanding of these mechanisms indicate some ways in which efficiency of resource capture could be level cannot be meaningfully considered without simultaneous understanding of implications at the canopy level. 36 refs., 5 figs., 1 tab.

  17. Examining the Evolution of Paid Parental Leave.

    Science.gov (United States)

    Sladek, Carol

    While the United States continues to be the only developed nation without mandated paid maternity leave, U.S. employers are blazing their own trail for new parents. This article defines parental leave, explains what's driving the increased interest in paid parental leave among employers offering it and discusses how paid parental leave can benefit employers and employees alike. Finally, the author discusses why not all employers are offering these benefits as well as considerations for employers contemplating whether paid parental leave is right for them.

  18. 5 CFR 630.1015 - Movement between voluntary leave bank and leave transfer programs.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Movement between voluntary leave bank and leave transfer programs. 630.1015 Section 630.1015 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ABSENCE AND LEAVE Voluntary Leave Bank Program § 630.1015 Movement...

  19. 5 CFR 630.1104 - Donations from a leave bank to an emergency leave transfer program.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Donations from a leave bank to an emergency leave transfer program. 630.1104 Section 630.1104 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ABSENCE AND LEAVE Emergency Leave Transfer Program § 630.1104 Donations...

  20. 29 CFR 825.205 - Increments of FMLA leave for intermittent or reduced schedule leave.

    Science.gov (United States)

    2010-07-01

    ... intermittent leave or working a reduced leave schedule to commence or end work mid-way through a shift, such as... per week, but works only 20 hours a week under a reduced leave schedule, the employee's ten hours of... 29 Labor 3 2010-07-01 2010-07-01 false Increments of FMLA leave for intermittent or reduced...

  1. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  2. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  3. RECRUITMENT FINANCED BY SAVED LEAVE (RSL PROGRAMME)

    CERN Multimedia

    Division du Personnel; Tel. 73903

    1999-01-01

    Transfer to the saved leave account and saved leave bonusStaff members participating in the RSL programme may opt to transfer up to 10 days of unused annual leave or unused compensatory leave into their saved leave account, at the end of the leave year, i.e. 30 September (as set out in the implementation procedure dated 27 August 1997).A leave transfer request form, which you should complete, sign and return, if you wish to use this possibility, has been addressed you. To allow the necessary time for the processing of your request, you should return it without delay.As foreseen in the implementation procedure, an additional day of saved leave will be granted for each full period of 20 days remaining in the saved leave account on 31 December 1999, for any staff member participating in the RSL programme until that date.For part-time staff members participating in the RSL programme, the above-mentioned days of leave (annual, compensatory and saved) are adjusted proportionally to their contractual working week as...

  4. Tapping of electrical energy from plant leaves: Sansevieria trifasciata

    Energy Technology Data Exchange (ETDEWEB)

    Jain, K.A.; Hundet, A.; Abraham, S.; Nigam, H.L.

    Some investigations on the prospective use of plant leaves as useful battery material have been described in this paper. A bio-emf-device (BED) has been developed using the leaf of Sansevieria trifasciata. The current - voltage (I-V) and the current - power (I-power) characteristics have been measured. Kinetic studies have also been made taking different loads. The results based on these characteristics of BED indicate a close involvement of the bio-contribution in the generation of electric power. Some applications of using these BEDs are also suggested to operate low power electronic circuits.

  5. Paternity leave experiences of NHS doctors.

    Science.gov (United States)

    Gordon, Hannah; Szram, Joanna

    2013-10-01

    This study assesses NHS doctors' experiences of paternity leave and evaluates whether practices have changed since the introduction of additional paternity leave (APL) in April 2011. An anonymised online survey designed to discover experiences and uptake of APL and ordinary paternity leave (OPL) was distributed to all members of the London Deanery Synapse® network. In total, 364 fathers responded. Their seniority ranged from foundation trainees to consultants. Following the formal introduction of OPL in 2003, the number of fathers taking any paternity leave increased (from 50% to 95.6%). The majority of respondents (76.7%) felt well supported by their employer. Since the introduction of APL, 3% of respondents took additional leave. Reasons for the low uptake of APL included the impracticalities of the law, poor awareness and perceived attitudes and implications for training. Problems with OPL included the inadequate provision of cover and difficulties in timing the leave appropriately.

  6. Guide device

    International Nuclear Information System (INIS)

    Brammer, C.M. Jr.

    1977-01-01

    Disclosed is a fuel handling guide tube centering device for use in nuclear reactors during fuel assembly handling operations. The device comprises an outer ring secured to the flange of a nuclear reactor pressure vessel, a rotatable table rotatably coupled to the outer ring, and a plurality of openings through the table. Truncated locating cones are positioned in each of the openings in the table, and the locating cones center the guide tube during fuel handling operations. The openings in the table are located such that each fuel assembly in the nuclear core may be aligned with one of the openings by a suitable rotation of the table. The locating cones thereby provide alignment between the fuel handling mechanism located in the guide tube and the individual fuel assemblies of the cone. The need for a device to provide alignment is especially critical for floating nuclear power plants, where wave motion may exist during fuel handling operations. 5 claims, 4 figures

  7. Paid Maternity Leave and Breastfeeding Outcomes.

    Science.gov (United States)

    Mirkovic, Kelsey R; Perrine, Cria G; Scanlon, Kelley S

    2016-09-01

    Despite the benefits of breastfeeding, rates in the United States are low. Shorter maternity leave is associated with lower initiation and shorter durations of breastfeeding; however, little is known about how paid maternity leave may influence breastfeeding rates. We used data from the 2006-2010 U.S. National Survey of Family Growth on the most recent birth to employed women who delivered a child within the previous 5 years. Separate multivariable logistic regression models were used to describe the associations between paid leave duration (0, 1-5, 6-11, ≥ 12 weeks, maternity leave not taken) and three outcomes: 1) breastfeeding initiation, 2) 6-month duration, and 3) 6-month duration among initiators. Twenty-eight percent of prenatally employed women received no paid leave. Women who received 12 or more weeks of paid leave were more likely to initiate breastfeeding compared to women with no paid leave (87.3% vs 66.7%, adjusted odds ratio [aOR] 2.83 [95% confidence interval {CI} 1.23-6.48]). Similarly, women with 12 or more weeks of paid leave were more likely to breastfeed at 6 months, compared to women with no paid leave (24.9% vs 50.1%, aOR 2.26 [95% CI 1.20-4.26]). Among women who initiated breastfeeding, having received 12 or more weeks' paid leave increased the odds of breastfeeding for 6 or more months; however, the association was not statistically significant in the adjusted model (aOR 1.81 [95% CI 0.93-3.52]). Employed women who received 12 or more weeks of paid maternity leave were more likely to initiate breastfeeding and be breastfeeding their child at 6 months than those without paid leave. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

  8. [New cerebroside from leaves of pineapple].

    Science.gov (United States)

    Wang, Jin-Ping; Wang, Hong-Ying; Du, Li-Jun; Ding, Yi; Xing, Dong-Ming; Wang, Wei

    2007-03-01

    To study the chemical constituents of the leaves of pineapple. Chromatographic methods were used to isolate compounds from the leaves of pineapple and spectral methods were used to identify the structures of the isolated compounds. Compound 1 was isolated from the leaves of pineapple. It was identified as 1-O-beta-D-glucopyranosyl-(2S, 3R, 4E, 11E)-2-[(2(R)-hydroxydocosanoyl) amido]-4, 11-hexadecanediene-1, 3-diol. Compound 1 was a new compound.

  9. Nurses' leaving intentions: antecedents and mediating factors.

    Science.gov (United States)

    Takase, Miyuki; Yamashita, Noriko; Oba, Keiko

    2008-05-01

    This paper is a report of a study to investigate how nurses' work values, perceptions of environmental characteristics, and organizational commitment are related to their leaving intentions. Nurse leaving is a serious international problem as it contributes to the nursing shortage that threatens the welfare of society. The characteristics of nurses, the work environment and nurses' feelings towards their jobs (or organizations) have an impact on their leaving intentions. A convenience sample of 849 Registered Nurses was recruited from three public hospitals in the central-west region of Japan during 2006 and 319 completed questionnaires were returned (response rate 39%). Data were analysed using regression analysis. Nurses' work values and their perceptions of their workplace environment interacted to influence leaving intentions. When there was a match between the importance nurses placed on being able to challenge current clinical practices and the number of the actual opportunities to do so, leaving intentions were low. When there was a mismatch, intention to quit the job became stronger. In addition, organizational commitment intervened between nurses' perceptions of the match in clinical challenges and leaving intention. Nurses' leaving intentions, deserve extensive exploration of their causes. Such exploration should include attending to both nurses' needs and organizational characteristics, investigating how the match between them could affect nurses' leaving intention, and exploring factors that intervene between nurses' perceptions of the match and leaving intention.

  10. Medical Devices

    NARCIS (Netherlands)

    Verkerke, Gijsbertus Jacob; Mahieu, H.F.; Geertsema, A.A.; Hermann, I.F.; van Horn, J.R.; Hummel, J. Marjan; van Loon, J.P.; Mihaylov, D.; van der Plaats, A.; Schraffordt Koops, H.; Schutte, H.K.; Veth, R.P.H.; de Vries, M.P.; Rakhorst, G.; Shi, Donglu

    2004-01-01

    The development of new medical devices is a very time-consuming and costly process. Besides the time between the initial idea and the time that manufacturing and testing of prototypes takes place, the time needed for the development of production facilities, production of test series, marketing,

  11. Electrochemical device

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry; Bellows, Richard J.

    1988-01-12

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  12. Assistive Devices

    Science.gov (United States)

    If you have a disability or injury, you may use a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get ...

  13. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  14. Cooling device in thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Tsutomu.

    1988-01-01

    Purpose: To prevent loss of cooling effect over the entire torus structure directly after accidental toubles in a cooling device of a thermonuclear device. Constitution: Coolant recycling means of a cooling device comprises two systems, which are alternately connected with in-flow pipeways and exit pipeways of adjacent modules. The modules are cooled by way of the in-flow pipeways and the exist pipeways connected to the respective modules by means of the coolant recycling means corresponding to the respective modules. So long as one of the coolant recycling means is kept operative, since every one other modules of the torus structure is still kept cooled, the heat generated from the module put therebetween, for which the coolant recycling is interrupted, is removed by means of heat conduction or radiation from the module for which the cooling is kept continued. No back-up emergency cooling system is required and it can provide high economic reliability. (Kamimura, M.)

  15. INTRODUCTION OF A NEW LEAVE MANAGEMENT SYSTEM

    CERN Multimedia

    DIVISION HR

    2000-01-01

    The introduction of new leave rules (arising from the RSL, PRP and other programs) has made the present leave management system rather complicated and difficult to manage. It has therefore been decided to replace it with a more flexible and adaptable system, which will come into force on 1st October 2000. Henceforth, days of leave will be credited monthly instead of annually. Members of the personnel will have round-the-clock direct access to more detailed, confidential information regarding their various kinds of leave. They will also receive a personal monthly statement with their pay slips. The new system does not require any amendment of the regulations, except with respect to the frequency of leave calculations (monthly instead of annual). I. Main characteristics of the new leave system1. The main feature of the new system is the creation of accounts to which leave will be credited or debited as appropriate. Depending on their circumstances, members of the personnel may have up to four individual leave a...

  16. INTRODUCTION OF A NEW LEAVE MANAGEMENT SYSTEM

    CERN Document Server

    HR Division

    2000-01-01

    The introduction of new leave rules (arising from the RSL, PRP and other programmes) has made the present leave management system rather complicated and difficult to manage. It has therefore been decided to replace it with a more flexible and adaptable system, which will come into force on 1st October 2000. Henceforth, days of leave will be credited monthly instead of annually. Members of the personnel will have round-the-clock direct access to more detailed, confidential information regarding their various kinds of leave.They will also receive a personal monthly statement with their pay slips. The new system does not require any amendment of the regulations, except with respect to the frequency of leave calculations (monthly instead of annual). I. Main characteristics of the new leave system 1. The main feature of the new system is the creation of accounts to which leave will be credited or debited as appropriate. Depending on their circumstances, members of the personnel may have up to four individual leave...

  17. Antioxidant activity of Arbutus unedo leaves.

    Science.gov (United States)

    Pabuçcuoğlu, A; Kivçak, B; Baş, M; Mert, T

    2003-09-01

    The ethanol and methanol extracts of Arbutus unedo leaves were screened for antioxidant activity. The antioxidant activity was determined by an improved assay based on the decolorization of the radical monocation of [2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)] (ABTS). The ethanol and methanol extract of A. unedo leaves displayed potent antioxidant activity.

  18. Grass leaves as potential hominin dietary resources.

    Science.gov (United States)

    Paine, Oliver C C; Koppa, Abigale; Henry, Amanda G; Leichliter, Jennifer N; Codron, Daryl; Codron, Jacqueline; Lambert, Joanna E; Sponheimer, Matt

    2018-04-01

    Discussions about early hominin diets have generally excluded grass leaves as a staple food resource, despite their ubiquity in most early hominin habitats. In particular, stable carbon isotope studies have shown a prevalent C 4 component in the diets of most taxa, and grass leaves are the single most abundant C 4 resource in African savannas. Grass leaves are typically portrayed as having little nutritional value (e.g., low in protein and high in fiber) for hominins lacking specialized digestive systems. It has also been argued that they present mechanical challenges (i.e., high toughness) for hominins with bunodont dentition. Here, we compare the nutritional and mechanical properties of grass leaves with the plants growing alongside them in African savanna habitats. We also compare grass leaves to the leaves consumed by other hominoids and demonstrate that many, though by no means all, compare favorably with the nutritional and mechanical properties of known primate foods. Our data reveal that grass leaves exhibit tremendous variation and suggest that future reconstructions of hominin dietary ecology take a more nuanced approach when considering grass leaves as a potential hominin dietary resource. Copyright © 2017. Published by Elsevier Ltd.

  19. When and Why Dropouts Leave High School

    Science.gov (United States)

    Stearns, Elizabeth; Glennie, Elizabeth J.

    2006-01-01

    Teens may leave school because of academic failure, disciplinary problems, or employment opportunities. In this article, the authors test whether the reasons dropouts leave school differ by grade level and age. We compare dropout rates and reasons across grade levels and ages for all high school students, ethnic groups, and gender groups. Across…

  20. Reflectance measurements of leaves for detecting visible and non-visible ozon damage to crops

    International Nuclear Information System (INIS)

    Kraft, M.; Weigel, H.-J.; Mejer, G.-J.; Brandes, F.

    1996-01-01

    Spring wheat (Triticum aestivum cv. Turbo), white clover (Trifolium repens cv. Karina) and maize (Zea mays cv. Bonny) plants were exposed for 20–30 days in open top chambers to charcoal-filtered air (CF, control) and CF air supplied with O 3 for 8–12 h/per day in the concentration range of 180–240 μg O 3 /m 3 (8–12 h/day treatment mean). At the end of the O 3 treatment spectral reflectance measurements were made on single leaves of all 3 species and on canopies of wheat and clover using a CCD (Charged Coupled Device) camera and wavelength filters with 11 wavelength bands ranging from 450 nm to 950 nm. Different vegetation indices such as the normalized difference vegetation index (NDVI) and the ≪main inflection point≫ (MIP) were calculated. Based on these results it was shown that visible O 3 damages were correlated to the spectral reflectance changes: Both leaves and canopies showed an increased reflectance of visible light after ozone treatment. While clover and maize leaves as well as clover and wheat canopies showed a decreased near infrared (NIR) reflectance, the NIR reflectance of wheat leaves did not change, even if the leaves had visible symptoms. A decreased infrared reflectance was detectable for all clover leaves after O 3 treatment although for part of the leaves no visible foliar damage symptoms could be observed

  1. [Beneficial effect of maternity leave on delivery].

    Science.gov (United States)

    Xu, Qian; Séguin, Louise; Goulet, Lise

    2002-01-01

    To identify the contribution of the duration of the prenatal maternity leave on term delivery. Characteristics of the prenatal maternity leave and delivery among 363 working women who had delivered a full-term infant at 1 of 4 hospitals in Montreal during 1996 were studied. The presence of an intervention or complication during delivery was observed in 68.9% of the participants. The average duration of the prenatal maternity leave was about 8 weeks (SD = 7). The adjusted risk of a difficult delivery decreased significantly with the duration of the prenatal maternity leave (OR = 0.96; 95% CI: 0.93-0.99). The duration of the maternity leave before delivery is associated with an easier term delivery for working women.

  2. Thermonuclear device

    International Nuclear Information System (INIS)

    Tezuka, Masaru.

    1993-01-01

    Protrusions and recesses are formed to a vacuum vessel and toroidal magnetic coils, and they are engaged. Since the vacuum vessel is generally supported firmly by a rack or the like by support legs, the toroidal magnetic field coils can be certainly supported against tumbling force. Then, there can be attained strong supports for the toroidal magnetic field coils, in addition to support by wedges on the side of inboard and support by share panels on the side of outboard, capable of withstanding great electromagnetic forces which may occur in large-scaled next-generation devices. That is, toroidal magnetic field coils excellent from a view point of deformation and stress can be obtained, to provide a thermonuclear device of higher reliability. (N.H.)

  3. Thermonuclear device

    International Nuclear Information System (INIS)

    Oosaki, Osamu; Masuda, Kenju.

    1980-01-01

    Purpose: To provide excellent electric properties and high reliability in a thermonuclear device by improving a current collecting board connected to a coil device. Constitution: A current collecting board element perforated with an opening for enserting a connecting terminal is sized to be inserted into a plating tank, and is surface treated in the plating tank. Only the current collecting board element preferably surface treated is picked up. A plurality of such current collecting board elements are connected and welded to form a large current collecting board. In this manner, the current collecting board having several m 2 to several ten order m 2 in area can be obtained as preferably surface treated at the connecting terminal hole. The current collecting board element can be determined in shape with the existing facility without increasing the size of a surface treating tank. (Kamimura, M.)

  4. Thermonuclear device

    International Nuclear Information System (INIS)

    Yagi, Yasuomi; Takahashi, Ken; Hashimoto, Hiroshi.

    1984-01-01

    Purpose: To improve the plasma confining performances by bringing the irregular magnetic fields nearly to zero and decreasing the absolute value of the irregular magnetic fields at every positions. Constitution: The winding direction of a plurality of coil elements, for instance, double pan cake coils of toroidal coils in a torus type or mirror type thermonuclear device are reversed to each other in their laminating direction, whereby the irregular magnetic fields due to the coil-stepped portions in each toroidal coils are brought nearly to zero. This enables to bring the average irregular magnetic fields as a whole in the thermonuclear device nearly to zero, as well as, decrease the absolute value of the irregular magnetic fields in each positions. Thus, the plasma confining performances can be improved. (Moriyama, K.)

  5. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  6. Latching device

    Science.gov (United States)

    Ulrich, G. W. (Inventor)

    1975-01-01

    A latching device is suited for use in establishing a substantially motionless connection between a stationary receiver and a movable latching mechanism. The latching mechanism includes a pivotally supported restraining hook continuously urged into a capturing relationship with the receiver, characterized by a spring-biased pawl having a plurality of aligned teeth. The teeth are seated in the surface of the throat of the hook and positionable into restraining engagement with a rigid restraining shoulder projected from the receiver.

  7. Device for measuring well twistings

    Energy Technology Data Exchange (ETDEWEB)

    Kostin, Yu S; Golubin, S V; Keller, V F; Merzheyevskiy, A B; Zdorov, V P

    1982-01-01

    The device for measuring the well twistings with the use of fluids (poured into a vessel and which leave an imprint on the walls), containing a housing and adapter, is distinguished by the fact that in order to improve the accuracy of measurement by obtaining a clear imprint, it is equipped with cylinder that is spring-loaded in relation to the adapter, forming a vessel for fluid with the adapter. The adapter is made of two parts, one of which is made of neutral metal in relation to the fluid, and the other, from active in relation to the same fluid.

  8. [Modeling polarimetric BRDF of leaves surfaces].

    Science.gov (United States)

    Xie, Dong-Hui; Wang, Pei-Juan; Zhu, Qi-Jiang; Zhou, Hong-Min

    2010-12-01

    The purpose of the present paper is to model a physical polarimetric bidirectional reflectance distribution function (pBRDF), which can character not only the non-Lambertian but also the polarized features in order that the pBRDF can be applied to analyze the relationship between the degree of polarization and the physiological and biochemical parameters of leaves quantitatively later. Firstly, the bidirectional polarized reflectance distributions from several leaves surfaces were measured by the polarized goniometer developed by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences. The samples of leaves include two pieces of zea mays L. leaves (young leaf and mature leaf) and a piece of E. palcherrima wild leaf. Non-Lambertian characteristics of directional reflectance from the surfaces of these three leaves are obvious. A Cook-Torrance model was modified by coupling the polarized Fresnel equations to simulate the bidirectional polarized reflectance properties of leaves surfaces. The three parameters in the modified pBRDF model, such as diffuse reflectivity, refractive index and roughness of leaf surface were inversed with genetic algorithm (GA). It was found that the pBRDF model can fit with the measured data well. In addition, these parameters in the model are related with both the physiological and biochemical properties and the polarized characteristics of leaves, therefore it is possible to build the relationships between them later.

  9. Influence of maternity leave on exclusive breastfeeding.

    Science.gov (United States)

    Monteiro, Fernanda R; Buccini, Gabriela Dos S; Venâncio, Sônia I; da Costa, Teresa H M

    To describe the profile of women with children aged under 4 months living in the Brazilian state capitals and in the Federal District according to their working status and to analyze the influence of maternity leave on exclusive breastfeeding (EBF) among working women. This was a cross-sectional study with data extracted from the II National Maternal Breastfeeding Prevalence Survey carried out in 2008. Initially, a descriptive analysis of the profile of 12,794 women was performed, according to their working status and maternity leave and the frequency of maternity leave in the Brazilian regions and capitals. The study used a multiple model to identify the influence of maternity leave on EBF interruption, including 3766 women who declared they were working and were on maternity leave at the time of the interview. The outcome assessed in the study was the interruption of the EBF, classified by the WHO. Regarding the working status of the mothers, 63.4% did not work outside of their homes and among those who worked, 69.8% were on maternity leave. The largest prevalence among workers was of women older than 35 years of age, with more than 12 years of schooling, primiparous and from the Southeast and South regions. The lack of maternity leave increased by 23% the chance of EBF interruption. Maternity leave contributed to increase the prevalence of EBF in the Brazilian states capitals, supporting the importance of increasing the maternity leave period from four to six months. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  10. Influence of maternity leave on exclusive breastfeeding

    Directory of Open Access Journals (Sweden)

    Fernanda R. Monteiro

    Full Text Available Abstract Objectives: To describe the profile of women with children aged under 4 months living in the Brazilian state capitals and in the Federal District according to their working status and to analyze the influence of maternity leave on exclusive breastfeeding (EBF among working women. Methods: This was a cross-sectional study with data extracted from the II National Maternal Breastfeeding Prevalence Survey carried out in 2008. Initially, a descriptive analysis of the profile of 12,794 women was performed, according to their working status and maternity leave and the frequency of maternity leave in the Brazilian regions and capitals. The study used a multiple model to identify the influence of maternity leave on EBF interruption, including 3766 women who declared they were working and were on maternity leave at the time of the interview. The outcome assessed in the study was the interruption of the EBF, classified by the WHO. Results: Regarding the working status of the mothers, 63.4% did not work outside of their homes and among those who worked, 69.8% were on maternity leave. The largest prevalence among workers was of women older than 35 years of age, with more than 12 years of schooling, primiparous and from the Southeast and South regions. The lack of maternity leave increased by 23% the chance of EBF interruption. Conclusion: Maternity leave contributed to increase the prevalence of EBF in the Brazilian states capitals, supporting the importance of increasing the maternity leave period from four to six months.

  11. Maternity and family leave policies in rural family practices.

    Science.gov (United States)

    Mainguy, S; Crouse, B J

    1998-09-01

    To help recruit and retain physicians, especially women, rural family practice groups need to establish policies regarding maternity and other family leaves. Also important are policies regarding paternity leave, adoptive leave, and leave to care for elderly parents. We surveyed members of the American Academy of Family Physicians in rural practice in 1995 to assess the prevalence of leave policies, the degree to which physicians are taking family leave, and the characteristics of ideal policies. Currently, both men and women physicians are taking family leaves of absence, which indicates a need for leave policies. Furthermore, a lack of family leave policies may deter women from entering rural practice.

  12. Labour Supply Responses to Paid Parental Leave

    OpenAIRE

    Karimi, Arizo; Lindahl, Erica; Skogman Thoursie, Peter

    2012-01-01

    Women account for the majority of parental leave take-up, which is likely one of the major reasons for the gender gap in income and wages. Consequently, many countries exert effort to promote a more gender equal division of parental leave. Indeed, the last decades have seen an increase in fathers' take-up of parental leave benefits, but the gender earnings gap has remained fairly constant. In this paper we re-evaluate the labour supply responses of both mothers and fathers to three major refo...

  13. Late adolescents' conceptualizations of home-leaving.

    Science.gov (United States)

    Moore, D; Hotch, D F

    1981-02-01

    Separation from the family, a key developmental task, has received scant attention from developmentalists. In this study, college students' dissimilarity ratings and ratings on 22 bipolar adjective scales were obtained for a set of 20 definitions of home-leaving. Results of a cluster analysis revealed that conceptualizations of the definitions are organized in terms of eight clusters. Ratings on the 22 adjective scales provided an empirical means for interpreting the typological structure of the home-leaving definitions. Convergence the results of this inductive study of home-leaving and elements of ego development theory was noted.

  14. Laser induced fluorescence of some plant leaves

    International Nuclear Information System (INIS)

    Helmi, M.S.; Mohamed, M.M.; Amer, R.; Elshazly, O.; Elraey, M.

    1992-01-01

    Laser induced fluorescence (LIF) is successfully used as a technique for remote detection of spectral characteristics of some plants. A pulsed nitrogen laser at 337.1 nm is used to excite cotton, corn and rice leaves. The fluorescence spectrum is detected in the range from 340 nm to 820 nm. It is found that, these plant leaves have common fluorescence maxima at 440 nm, 685 nm and 740 nm. plant leaves are also found to be identifiable by the ratio of the fluorescence intensity at 440 nm to that at 685 nm. The present technique can be further used as a means of assessing, remotely, plant stresses. 5 fig

  15. Fathers' Leave, Fathers' Involvement and Child Development

    DEFF Research Database (Denmark)

    del Carmen Huerta, Maria; Lausten, Mette; Baxter, Jennifer

    involved’ perform better during the early years than their peers with less involved fathers. This paper analyses data of four OECD countries — Australia; Denmark; United Kingdom; United States — to describe how leave policies may influence father’s behaviours when children are young and whether...... their involvement translates into positive child cognitive and behavioural outcomes. This analysis shows that fathers’ leave, father’s involvement and child development are related. Fathers who take leave, especially those taking two weeks or more, are more likely to carry out childcare related activities when...

  16. Damping device

    International Nuclear Information System (INIS)

    Banks, E.L. Jr.; Dowell, T.P.

    1976-01-01

    The description is given of a damper which includes a pair of telescopic components interconnected by relative linear movement one in relation to the other, by a screw and ball nut device, with a braking surface on one of the components, a brake engaging the braking surface, an inertia mass entrained by the other components, non-deformable and distinct brake actuating gear, independently mobile in relation to the other braking system and fixed and controlled by the inertia mass, positively to engage the braking surface. This damper is for retaining the parts of a nuclear power station so that can withstand earthquakes [fr

  17. Thermonuclear device

    International Nuclear Information System (INIS)

    Inoue, Toyokazu; Murata, Toru.

    1983-01-01

    Purpose: To shield superconducting coils for use in the generation of magnetic field against neutron irradiation thereby preventing tritium contamination. Constitution: The thermonuclear device comprises, in its inside, a vacuum container for containing plasmas, superconducting coils disposed to the outside of the vacuum container and neutron absorbers disposed between the super-conducting coils and the vacuum container. since neutrons issued from the plasma are absorbed by neutron absorbers and not irradiated to the superconducting coils, generation of tritium due to the reaction between 3 He in the liquid helium as the coolants for the super-conducting coils and the neutrons is prevented. (Aizawa, K.)

  18. Strainer device

    International Nuclear Information System (INIS)

    Mokuya, Kenji.

    1975-01-01

    Object: To provide a strainer device, which is adapted to facilitate flushing and is particularly suited for installation in the cooling system of a liquid metal cooled fast breeding reactor. Structure: A casing accommodating a strainer and a blind plate for the selection of a flow path is provided at a suitable portion of the duct line. The blind plate is adapted to be rotated by an opening and closing means consisting of a rod. bellows, shaft and so forth. At the time of flushing, the duct line is sealed by the blind plate. (Nakamura, S.)

  19. 78 FR 8833 - The Family and Medical Leave Act

    Science.gov (United States)

    2013-02-06

    ... creates a new qualifying exigency leave category for parental care. In military caregiver leave, the Final... covered employers to take job- protected, unpaid leave, or to substitute appropriate accrued paid leave... CFR Part 825 The Family and Medical Leave Act; Final Rule #0;#0;Federal Register / Vol. 78 , No. 25...

  20. 5 CFR 630.906 - Transfer of annual leave.

    Science.gov (United States)

    2010-01-01

    ... employing agency may not be sufficient to meet the needs of the leave recipient; or (3) In the judgment of... specified leave recipient. Except as provided in paragraph (f) of this section, annual leave may be transferred only to a leave recipient employed by the leave donor's employing agency. (b) Except as provided...

  1. Device for analyzing a solution

    International Nuclear Information System (INIS)

    Marchand, Joseph.

    1978-01-01

    The device enables a solution containing an antigen to be analyzed by the radio-immunology technique without coming up against the problems of antigen-antibody complex and free antigen separation. This device, for analyzing a solution containing a biological compound capable of reacting with an antagonistic compound specific of the biological compound, features a tube closed at its bottom end and a component set and immobilized in the bottom of the tube so as to leave a capacity between the bottom of the tube and its lower end. The component has a large developed surface and is so shaped that it allows the solution to be analyzed to have access to the bottom of the tube; it is made of a material having some elastic deformation and able to take up a given quantity of the biological compound or of the antagonistic compound specific of the biological compound [fr

  2. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  3. Thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Takuro; Maki, Koichi.

    1997-01-01

    The present invention provides a thermonuclear device, in which integrity of a measuring device is kept, the reactor wall temperature and wear of armour materials are monitored accurately even under intense radiation rays, so that the flow rate of coolants and plasma power can be controlled by using the signals. Infrared rays generated from the surface of the armour materials disposed on a first wall are detected to measure the reactor wall temperature. Coolant flow rate and plasma power are controlled based on the obtained reactor wall temperature. In addition, infrared rays generated from the back of the armour materials are detected to obtain the surface temperature in order to avoid intense radiation rays from plasmas. The coolant flow rate and the plasma power are controlled based on the obtained temperature on the surface of the reactor thereby controlling the temperature of the first wall and the armour material to 300degC or lower in a case of the first wall made of stainless steel and 1000degC or lower in a case of the armour material made of graphite. (I.S.)

  4. Thermonuclear device

    International Nuclear Information System (INIS)

    Kuriyama, Masaaki; Yamamoto, Masahiro; Furuyama, Masayuki; Saito, Ryusei.

    1981-01-01

    Purpose: To enable the efficient and rapid cooling of a vacuum vessel by cooling with gas when the temperature of the vacuum vessel is higher than the boiling point of water and cooling with water when the temperature is lower than the boiling point of water. Constitution: A cooling pipe is provided through an insulating pipe on the outer periphery of a vacuum vessel. The cooling pipe communicates through a cooling gas valve and a coolant valve with a cooling gas supply device and a coolant supply device, and a heat exchanger is disposed at the pipe. When the vessel is higher than the boiling point of the coolant the coolant valve is closed and the cooling gas valve is opened and gas is supplied to cool the vessel. The gas is recoverd through a heat exchanger. On the other hand, when the temperature of vessel is lower than the boiling point of the coolant, the gas valve is closed, the coolant valve is opened, and the vessel is cooled with coolant. The vacuum vessel can be cooled for short time employing both the gas and the coolant together. (Yoshino, Y.)

  5. Thermonuclear device

    International Nuclear Information System (INIS)

    Takano, Hirohisa; Nakamoto, Kazunari; Hanai, Satoshi.

    1984-01-01

    Purpose: To provide coils of high mechanical strength for use at the center of a torus type thermonuclear device. Constitution: A plurality of copper plates having cooling holes and bolt holes and insulation paper sheets of the same shape are prepared. The copper plate is different from the insulation paper sheet only in that the position-phase angle of the opening portion is larger by 15 - 30 0 . The copper plates and the insulation paper sheets are alternately stacked by a required number of turns while displacing the angle, and then clamped by bolts to form a mechanically strong coil with no metallurgical joining. Further, since the insulation paper sheets are not present in the radial direction and only one insulation paper sheet is inserted for each turn in the direction of the coil height, the space occupied by the coil can be decreased. According to this invention, the magnetic flux density at the center of the device can be increased as compared with the conventional case to thereby apply a higher voltage on the side of plasmas. (Moriyama, K.)

  6. Irradiation device

    International Nuclear Information System (INIS)

    Suzuki, Toshimitsu.

    1989-01-01

    In an irradiation device for irradiating radiation rays such as electron beams to pharmaceuticals, etc., since the distribution of scanned electron rays was not monitored, the electron beam intensity could be determined only indirectly and irradiation reliability was not satisfactory. In view of the above, a plurality of monitor wires emitting secondary electrons are disposed in the scanning direction near a beam take-out window of a scanning duct, signals from the monitor wires are inputted into a display device such as a cathode ray tube, as well as signals from the monitor wires at the central portion are inputted into counting rate meters to measure the radiation dose as well. Since secondary electrons are emitted when electron beams pass through the monitor wires and the intensity thereof is in proportion with the intensity of incident electron beams, the distribution of the radiation dose can be monitored by measuring the intensity of the emitted secondary electrons. Further, uneven irradiation, etc. can also be monitored to make the radiation of irradiation rays reliable. (N.H.)

  7. Maternity leave, women's employment, and marital incompatibility.

    Science.gov (United States)

    Hyde, J S; Essex, M J; Clark, R; Klein, M H

    2001-09-01

    This research investigated the relationship between the length of women's maternity leave and marital incompatibility, in the context of other variables including the woman's employment, her dissatisfaction with the division of household labor, and her sense of role overload. Length of leave, work hours, and family salience were associated with several forms of dissatisfaction, which in turn predicted role overload. Role overload predicted increased marital incompatibility for experienced mothers but did not for first-time mothers, for whom discrepancies between preferred and actual child care were more important. Length of maternity leave showed significant interactions with other variables, supporting the hypothesis that a short leave is a risk factor that, when combined with another risk factor, contributes to personal and marital distress.

  8. Tomato leaves methanol extract possesses anti- inflammatory ...

    African Journals Online (AJOL)

    GREGORY

    2011-12-16

    Dec 16, 2011 ... demonstrated, the anti-inflammatory effect of tomato leaves and its associated molecular mechanisms have not yet .... dissolved in 10% of culture-grade dimethylsulfoxide (DMSO; Sigma-. Aldrich .... In Vitro Cell. Dev. Biol.

  9. 5 CFR 630.1111 - Limitation on the amount of donated annual leave received by an emergency leave recipient.

    Science.gov (United States)

    2010-01-01

    ... needs of individual emergency leave recipients, an employing agency may allow an employee to receive... annual leave received by an emergency leave recipient. 630.1111 Section 630.1111 Administrative Personnel... recipient. An emergency leave recipient may receive a maximum of 240 hours of donated annual leave at any...

  10. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  11. On the Motion of Falling Leaves

    OpenAIRE

    Razavi, Pedram

    2010-01-01

    This paper investigates the motion of falling leaves through modeling using papers and the corresponding data collected from more than four thousands experiments. Two series of experiments were designed in order to study the relationship between different parameters which can affect different paths of motion in leaves. In the first series of experiments, the shapes of the potential paths that falling papers can take were investigated as a whole. A new classification scheme was derived from th...

  12. Do parents leave a smaller carbon footprint?

    DEFF Research Database (Denmark)

    Nordström, Leif Jonas; Shogren, Jason F.; Thunström, Linda

    Do parents leave a smaller carbon footprint? While becoming a parent is transformational as one focuses more on the future, the time constraints are more binding right now. Using a unique data set that allows us to compare CO2 emissions from Swedish two-adult households with and without children......, we find becoming a Swedish parent causes a person to leave a larger carbon ootprint—due to changes in transportation patterns and food consumption choices....

  13. Intra-Household Allocation of Parental Leave

    OpenAIRE

    Gobbi, Paula Eugenia; Parys, Juliane; Schwerhoff, Gregor

    2015-01-01

    We introduce childcare sharing in a collective model of household behavior to investigate which factors make spouses increase or decrease their share of parental leave. The concern about future consumption motivates parents to invest in their human capital and to limit their leave duration. Using relative income and the age difference between spouses as distribution factors, we cannot reject Pareto efficiency in childcare sharing. Higher relative incomes and larger age differences shift the c...

  14. Properties of leaves particleboard for sheathing application

    Science.gov (United States)

    Nuryawan, Arif; Rahmawaty

    2018-03-01

    Manufacturing particleboard (PB) made of leaves was carried out to make non-structural building components, such as insulation, partition, wall, and sheathing. Raw materials used dry leaves originated from plantation (palm oil leaves) and forest plantation (magahony leaves). The adhesive used was interior type thermosetting commercial resins, namely 10% urea-formaldehyde (UF) based on oven dry leaves. Hardener used for UF resin was 1% and 3% ammonium chloride (NH4Cl) 20% (w/w), respectively. Technically, the target density of PB was 0.8 g/cm3 with the dimension’s size of (250 x 250 x 10) mm3. The pressure, temperature, and time of pressing of the hot press were 25 kgf/cm2, 120C, and 10 minutes, respectively. After conditioning for one week, the PB then was evaluated their physical and mechanical properties according to Japanese Industrial Standard (JIS) A 5908 (2003). Results of this work showed: 1) Both types of PB (palm oil and mahagony leaves) were feasible to be produced for non-structural applications; 2) Addition of hardener enhanced the physical and mechanical properties of PB; 3) It was recommended to enhance the performance of the PB by manipulation of the raw materials and the design.

  15. Short-Term Saved Leave Scheme

    CERN Multimedia

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

  16. Short-Term Saved Leave Scheme

    CERN Multimedia

    HR Department

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

  17. Office design's impact on sick leave rates.

    Science.gov (United States)

    Bodin Danielsson, Christina; Chungkham, Holendro Singh; Wulff, Cornelia; Westerlund, Hugo

    2014-01-01

    The effect of office type on sickness absence among office employees was studied prospectively in 1852 employees working in (1) cell-offices; (2) shared-room offices; (3) small, (4) medium-sized and (5) large open-plan offices; (6) flex-offices and (7) combi-offices. Sick leaves were self-reported two years later as number of (a) short and (b) long (medically certified) sick leave spells as well as (c) total number of sick leave days. Multivariate logistic regression analysis was used, with adjustment for background factors. A significant excess risk for sickness absence was found only in terms of short sick leave spells in the three open-plan offices. In the gender separate analysis, this remained for women, whereas men had a significantly increased risk in flex-offices. For long sick leave spells, a significantly higher risk was found among women in large open-plan offices and for total number of sick days among men in flex-offices. A prospective study of the office environment's effect on employees is motivated by the high rates of sick leaves in the workforce. The results indicate differences between office types, depending on the number of people sharing workspace and the opportunity to exert personal control as influenced by the features that define the office types.

  18. Thermonuclear device

    International Nuclear Information System (INIS)

    Furuyama, Masayuki.

    1979-01-01

    Purpose: To provide the subject device wherein a conductive short-circuiting ring is installed in the vicinity of the bonded part of bellows and thick portion of vacuum vessel in the small circumferential direction of torus, thereby to reduce the electromagnetic force generated at the bellows. Constitution: A conductive short-circuiting ring is provided in the vicinity of the connected part of a thick portion and bellows portion. By this organization, a saddle type current generated at the thick portion by a vertical magnetic field flows through the short-circuiting ring because the resistance at a part where the short-circuiting ring is provided is reduced, and the current flowing through the bellows is remarkably reduced. For this reason, the electromagnetic force generated at the bellows is reduced thereby to prevent the bellows from being destroyed by the electromagnetic force. (Yoshihara, H.)

  19. Electrophoresis device

    Science.gov (United States)

    Rhodes, P. H.; Snyder, R. S. (Inventor)

    1982-01-01

    A device for separating cellular particles of a sample substance into fractionated streams of different cellular species includes a casing having a distribution chamber, a separation chamber, and a collection chamber. The electrode chambers are separated from the separation chamber interior by means of passages such that flow variations and membrane variations around the slotted portion of the electrode chamber do not enduce flow perturbations into the laminar buffer curtain flowing in the separation chamber. The cellular particles of the sample are separated under the influence of the electrical field and the separation chamber into streams of different cellular species. The streams of separated cells enter a partition array in the collection chamber where they are fractionated and collected.

  20. Thermonuclear device

    International Nuclear Information System (INIS)

    Suzuki, Shohei

    1988-01-01

    Purpose: To obtain high voltage withstanding current introduction terminals not suffering from the effects of the reduction in the creeping voltage withstanding property by the application of magnetic fields. Constitution: This invention concerns a current introduction terminal for supplying electric current to coils for use in a thermonuclear device, etc. The conductor of the current introduction terminal on the side of vacuum is completely covered with solid insulator. This can eliminate the portion of securing the creeping withstanding voltage. The voltage withstanding characteristics of the solid insulator covering the portion of the conductor on the side of vacuum has a constant value irrespective of the atmosphere or the absence or presence of magnetic fields. Accordingly, the voltage withstanding characteristics of the current introduction terminal on the side of vacuum are determined by the property of the solid insulator, which is not reduced by the application of magnetic fields. (Ikeda, J.)

  1. Safety device of thermonuclear device

    International Nuclear Information System (INIS)

    Aoki, Isao; Ueda, Shuzo; Seki, Yasushi; Sakurai, Akiko; Kasahara, Fumio; Obara, Atsushi; Yamauchi, Michinori.

    1997-01-01

    The present invention provides a safety device against an event of intrusion of coolants in a vacuum vessel. Namely, a coolant supply system comprises cooling tubes for supplying coolants to main reactor structure components including a vacuum vessel. A detection means detects leakage of coolants in the vacuum vessel. A coolant supply control means controls the supply of coolants to the main reactor structural components based on the leakage detection signals of the detection means. A stagnated material discharging means discharges stagnated materials in the main reactor structural components caused by the leakage of coolants. The leakage of coolants (for example, water) in the vacuum vessel can thus be detected by the water detection device in the vacuum vessel. A control value of a coolant supply means is closed by the leakage detection signals. The supply of coolants to the main reactor structural components is restricted to suppress the leakage. The stagnated materials are discharged to a tank by way of a water draining valve. (I.S.)

  2. A MODELING METHOD OF FLUTTERING LEAVES BASED ON POINT CLOUD

    OpenAIRE

    J. Tang; Y. Wang; Y. Zhao; Y. Zhao; W. Hao; X. Ning; K. Lv; Z. Shi; M. Zhao

    2017-01-01

    Leaves falling gently or fluttering are common phenomenon in nature scenes. The authenticity of leaves falling plays an important part in the dynamic modeling of natural scenes. The leaves falling model has a widely applications in the field of animation and virtual reality. We propose a novel modeling method of fluttering leaves based on point cloud in this paper. According to the shape, the weight of leaves and the wind speed, three basic trajectories of leaves falling are defined, which ar...

  3. ["Paternity leave"? Retrospective view on a delayed reform of maternity leave in Austria].

    Science.gov (United States)

    Munz, R

    1984-01-01

    Only 1 of 3 Austrian fathers involves himself daily in child rearing, and the younger the children, the less likely he is to be involved. Austria is among those European countries with the greatest pregnancy benefits. New mothers may take up to 1 year of paid maternity leave without fear of losing their jobs. This article uses 1982 Institute of Demography survey data to determine support for similar paternity leave for fathers. In the last few years, both Social Democrat and Conservative women have worked for this leave, although the movement has also found opposition by women in trade unions, as well as from conservative groups. Survey results show that 46% of married Austrian women, under age 40, favor paternity leave; 1 or 4 women can imagine their husbands taking such leave. Among husbands, 34% favored the leave option, and 1 of 4 could imagine taking the leave for a least part of the baby's first year. The study attempts to identify those husbands most likely to take advantage of paternity leave. At present, most men will not choose to stay with their children at the expense of earnings reduction. Compensation reforms for both mothers and fathers must first occur before men and women in a position to make real decisions on maternity and paternity leave.

  4. Pharmacognostical studies of leaves of Combretum albidum G. Don

    Directory of Open Access Journals (Sweden)

    Ashish S Zalke

    2013-01-01

    Full Text Available Background: Combretum albidum Don belonging to family Combretaceae is an unexplored medicinal plant in the Indian medicinal system. According to ethnobotanical information, the leaves are used in the treatment of peptic ulcer and its fruits are used in diarrhoea and dysentery. Stem bark is used in the treatment of jaundice and skin diseases. The problem encountered in standardisation of this medicinal plant is its identification by source. Materials and Methods: The pharmacognostical studies were carried out in terms of organoleptic, macroscopic, microscopic, physicochemical, florescence and phytochemical analysis. Physicochemical parameters such as total ash, moisture content and extractive values are determined by World Health Organization guidelines. The microscopic features of leaf components are observed with Nikon lab photo device with microscopic units. Results: Macroscopically, the leaves are simple, obovate in shape, acuminate apex, entire margin and smooth surface. Microscopically, the leaves showed a large vascular strand that consists of thick walled xylem elements mixed with xylem fibres and phloem which is present in a thin layer along inner and outer portions of xylem. External to the xylem occur a thin line of sclerenchyma. Powder microscopy revealed glandular trichomes in the adaxial epidermal peelings also shows the non-glandular trichomes fairly common in powder and epidermis with anisocytic stomata. Vessels elements are narrow, long, cylindrical and dense multi-seriate bordered pits. Xylem fibres are thin and long, with thick walls, which are lignified. Preliminary phytochemical screening showed the presence of carbohydrate, glycoside, saponin, flavonoid, phytosterols and phenolic compounds. Conclusions: The results of the study can serve as a valuable source of pharmacognostic information as suitable standards for identification of this plant material in future investigations and applications.

  5. Minimally Invasive Implantation of HeartWare Assist Device and Simultaneous Tricuspid Valve Reconstruction Through Partial Upper Sternotomy.

    Science.gov (United States)

    Hillebrand, Julia; Hoffmeier, Andreas; Djie Tiong Tjan, Tonny; Sindermann, Juergen R; Schmidt, Christoph; Martens, Sven; Scherer, Mirela

    2017-05-01

    Left ventricular assist device (LVAD) implantation is a well-established therapy to support patients with end-stage heart failure. However, the operative procedure is associated with severe trauma. Third generation LVADs like the HeartWare assist device (HeartWare, Inc., Framingham, MA, USA) are characterized by enhanced technology despite smaller size. These devices offer new minimally invasive surgical options. Tricuspid regurgitation requiring valve repair is frequent in patients with the need for mechanical circulatory support as it is strongly associated with ischemic and nonischemic cardiomyopathy. We report on HeartWare LVAD implantation and simultaneous tricuspid valve reconstruction through minimally invasive access by partial upper sternotomy to the fifth left intercostal space. Four male patients (mean age 51.72 ± 11.95 years) suffering from chronic heart failure due to dilative (three patients) and ischemic (one patient) cardiomyopathy and also exhibiting concomitant tricuspid valve insufficiency due to annular dilation underwent VAD implantation and tricuspid valve annuloplasty. Extracorporeal circulation was established via the ascending aorta, superior vena cava, and right atrium. In all four cases the LVAD implantation and tricuspid valve repair via partial median sternotomy was successful. During the operative procedure, no conversion to full sternotomy was necessary. One patient needed postoperative re-exploration because of pericardial effusion. No postoperative focal neurologic injury was observed. New generation VADs are advantageous because of the possibility of minimally invasive implantation procedure which can therefore minimize surgical trauma. Concomitant tricuspid valve reconstruction can also be performed simultaneously through partial upper sternotomy. Nevertheless, minimally invasive LVAD implantation is a challenging operative technique. © 2016 International Center for Artificial Organs and Transplantation and Wiley Periodicals

  6. Thermonuclear device

    International Nuclear Information System (INIS)

    Suzuki, Shohei.

    1980-01-01

    Purpose: To improve the plasma confining efficiency in a thermonuclear device having magnet coils using super-conducting wires by decreasing the uneven magnetic field resulted from current supply terminals and wirings. Constitution: Current introduction terminals of magnet coils using superconducting wires are short circuitted with a superconducting short circuit wire. Upon supplying current to the coils, the resistance of the coils is rendered superconductive and the resistance of the short circuit wire is rendered normally conductive heated by a heater and the switch is closed. In this case, most parts of the current are flown through the resistance of the coils and the switch is opened when the current arrives at a predetermined value to render the resistance of the short circuit wire superconductive. Then, the current transfers from the thyristor power source to the resistance of the short circuit wire, whereby the resistance of the coils and that of the short circuit wire from a permanent current loop. In this conditions, since current flows through the short circuit wire and the coils and not to the current introduction terminals, no uniform magnetic field is generated. (Kawakami, Y.)

  7. Reluctance device

    International Nuclear Information System (INIS)

    Claridge, A.N.; Smith, A.J.

    1983-01-01

    A reluctance device comprises two or more phases, each of which has a rotor mounted for rotation within a tubular member and an annular stator positioned externally of the tubular member. The rotor and the internal surface of the tubular member are each provided with aligned, axially spaced apart annular arrays of teeth, the teeth on the rotor confronting those on the tubular member in radially spaced apart relationship. The stator encloses a coil which, when electrically energised, creates a plurality of magnetic flux paths each of which extends radially between the rotor and stator via the confronting teeth and the tubular member, and axially along both the rotor and the portion of the stator located radially outwardly of the coil. The portion of the tubular member intermediate the teeth thereon is provided with a non-magnetic insert in order to resist the axial passage of magnetic flux therethrough. In one of the claims, the tubular member comprises a portion of a nuclear reactor which is adapted to contain a reactor control rod, the rotor constituting a portion of the drive mechanism for the control rod contained in operation within the tubular member. (author)

  8. Protection device for a thermonuclear device

    International Nuclear Information System (INIS)

    Kawashima, Shuichi.

    1986-01-01

    Purpose: To exactly detect the void coefficients of coolants even under high magnetic fields thereby detect the overheat of a thermonuclear device at an early stage. Constitution: The protecting device of this invention comprises a laser beam generation device, a laser beam detection device and an accident detection device. The laser generation device always generates laser beams, which are permeated through coolants and detected by the laser beam detection device, the optical amount of which is transmitted to the accident detection device. The accident detection device judges the excess or insufficiency of the detected optical amount with respect to the optical amount of the laser beams under the stationary state as a reference and issues an accident signal. Since only the optical cables that do not undergo the effect of the magnetic fields are exposed to high magnetic fields in the protection device of this invention, a high reliability can be maintained. (Kamimura, M.)

  9. Efficient network-matrix architecture for general flow transport inspired by natural pinnate leaves.

    Science.gov (United States)

    Hu, Liguo; Zhou, Han; Zhu, Hanxing; Fan, Tongxiang; Zhang, Di

    2014-11-14

    Networks embedded in three dimensional matrices are beneficial to deliver physical flows to the matrices. Leaf architectures, pervasive natural network-matrix architectures, endow leaves with high transpiration rates and low water pressure drops, providing inspiration for efficient network-matrix architectures. In this study, the network-matrix model for general flow transport inspired by natural pinnate leaves is investigated analytically. The results indicate that the optimal network structure inspired by natural pinnate leaves can greatly reduce the maximum potential drop and the total potential drop caused by the flow through the network while maximizing the total flow rate through the matrix. These results can be used to design efficient networks in network-matrix architectures for a variety of practical applications, such as tissue engineering, cell culture, photovoltaic devices and heat transfer.

  10. University Students Leaving Relationships (USLR): Scale Development and Gender Differences in Decisions to Leave Romantic Relationships

    Science.gov (United States)

    Hendy, Helen M.; Can, S. Hakan; Joseph, Lauren J.; Scherer, Cory R.

    2013-01-01

    The University Students Leaving Relationships scale was developed to identify student concerns when contemplating dissolution of romantic relationships. Participants included 1,106 students who rated the importance of issues when deciding to leave relationships. Factor analysis produced three dimensions: Missing the Relationship, Social…

  11. Occupational exposures and sick leave during pregnancy

    DEFF Research Database (Denmark)

    Hansen, Mette Lausten; Thulstrup, Ane Marie; Juhl, Mette

    2015-01-01

    OBJECTIVE: This study aimed to investigate associations between work postures, lifting at work, shift work, work hours, and job strain and the risk of sick leave during pregnancy from 10-29 completed pregnancy weeks in a large cohort of Danish pregnant women. METHODS: Data from 51 874 pregnancies...... in the Danish National Birth Cohort collected between 1996-2002 were linked to the Danish Register for Evaluation of Marginalization. Exposure information was based on telephone interviews. Hazard ratios (HR) with 95% confidence intervals (95% CI) were calculated by Cox regression analysis, using time of first...... episode of sick leave as the primary outcome. RESULTS: We found statistically significant associations between all the predictors and risk of sick leave; for non-sitting work postures (HRrange 1.55-2.79), cumulative lifting HRtrend 1.29, 95% CI 1.26-1.31, shift work (HRevening 1.90, 95% CI 1...

  12. The dewetting properties of lotus leaves.

    Science.gov (United States)

    Zhang, Jihua; Sheng, Xianliang; Jiang, Lei

    2009-02-03

    The high dewetting abilities of lotus leaves can be transited to a complete wetting state by soaking the leaves in water at a depth of 50 cm for 2 h. However, after being dried by N2 gas, the high dewetting behavior of lotus leaves may be mostly restored. This indicates that experimental procedure might considerably affect the dewetting abilities of lotus leaves. To discover the mechanism underlying this interesting dewetting phenomena, the dewetting force was used to characterize the dewetting abilities of surfaces, and model studies to mimic the papillae were done. Surface hydrophobicity, sizes, rise angles, and secondary structures of the models' sides affected their dewetting force with water. So we suggested that the dewetting states, Cassie or Wenzel's state, of lotus surfaces depend much on the depth of water, i.e., the hydraulic pressure. On the other hand, the primary structures of papillae in Cassie's state led to a high receding angle with respect to the plane of the leaf during the dewetting measurement. The secondary structures and micro/nano arrays of papillae increased the dewetting abilities of lotus leaves, since no water intruded between papillae. However, the structures of papillae in Wenzle's state significantly reduced the dewetting abilities of lotus leaves after being soaked at a depth of 50 cm for 2 h. Therefore, as for novel designs of microdevices floating on water, including the use of the high dewetting properties of suphydrophobic materials, surface (primary or secondary) microstructure and external pressure, such as static hydraulic pressure, must be taken into account.

  13. Maternal Employment Effects of Paid Parental Leave

    OpenAIRE

    Bergemann, Annette; Riphahn, Regina T.

    2015-01-01

    We study the short, medium, and longer run employment effects of a substantial change in the parental leave benefit program in Germany. In 2007, a means-tested parental leave transfer program that had paid benefits for up to two years was replaced by an earnings related transfer which paid benefits for up to one year. The reform generated winners and losers with heterogeneous response incentives. We find that the reform speeds up the labor market return of both groups of mothers after benefit...

  14. Does paternity leave affect mothers’ sickness absence

    OpenAIRE

    Bratberg, Espen; Naz, Ghazala

    2009-01-01

    Female labour force participation is high in Norway but sickness absence rates are higher for women than for men. This may be partly a result of unequal sharing of childcare in the family. In this paper, we consider the effect of paternity leave on sickness absence among women who have recently given birth. We draw on a six-year panel taken from full population data from administrative sources. We find that in the 6% of families where fathers take out leave more than the standard quota (gende...

  15. Preparing Apigenin from Leaves of Adinandra nitida

    Directory of Open Access Journals (Sweden)

    Zhengxiang Ning

    2008-01-01

    Full Text Available Leaves of Adinandra nitida were used as raw material, and a new industrially significant method of preparing apigenin was established by hydrolyzing a water extract and recrystallizing it with ethanol in order to obtain a new source for the production of this flavone. A yield of about 2.5 % (dry mass was obtained with the purity of 93.05 %, determined by high performance liquid chromatography (HPLC. Moreover, the main flavonoids in leaves of Adinandra nitida and the product after acid hydrolysis were identified as camellianin A and apigenin, respectively, by ultraviolet-visible spectrometry (UV/VIS and electrospray ionization mass spectrometry (ESI-MS.

  16. 38 CFR 21.342 - Leave accounting policy.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Leave accounting policy. 21.342 Section 21.342 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS.... Chapter 31 Leaves of Absence § 21.342 Leave accounting policy. (a) Amount of leave. A veteran pursuing one...

  17. 29 CFR 825.120 - Leave for pregnancy or birth.

    Science.gov (United States)

    2010-07-01

    ... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Coverage Under the Family and Medical Leave Act § 825.120 Leave for... of a child as follows: (1) Both the mother and father are entitled to FMLA leave for the birth of...

  18. 77 FR 8959 - The Family and Medical Leave Act

    Science.gov (United States)

    2012-02-15

    ...; and extends FMLA military caregiver leave to family members of certain veterans with serious injuries... Medical Leave Act of 1993, Final Rule on November 17, 2008 (2008 final rule). 73 FR 67934. A. What the... covered servicemember (referred to as ``military caregiver leave''). These two leave entitlements are...

  19. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    International Nuclear Information System (INIS)

    Connors Chen, Betsy

    2013-01-01

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled E ye Spy: Playing with Perception .

  20. LightLeaves: computer controlled kinetic reflection hologram installation and a brief discussion of earlier work

    Energy Technology Data Exchange (ETDEWEB)

    Connors Chen, Betsy, E-mail: acmeholo@gmail.com [ACME Holography, Somerville, Massachusetts USA 02144 (United States)

    2013-02-22

    LightLeaves is an installation combining leaf shaped, white light reflection holograms of landscape images with a special kinetic lighting device that houses a lamp and moving leaf shaped masks. The masks are controlled by an Arduino microcontroller and servomotors that position the masks in front of the illumination source of the holograms. The work is the most recent in a long series of landscapes that combine multi-hologram installations with computer controlled devices that play with the motion of the holograms, the light, sound or other elements in the work. LightLeaves was first exhibited at the Peabody Essex Museum in Salem, Massachusetts in a show titled {sup E}ye Spy: Playing with Perception{sup .}.

  1. Paid maternity and paternity leave: rights and choices.

    Science.gov (United States)

    Jordan, Claire

    2007-01-01

    From April 2007 onwards, maternity leave will be raised to nine months Paid maternity leave is associated with significant health benefits for babies, including reduced infant mortality The Government proposes to increase paid maternity leave to one year and introduce additional paternity leave by around 2009 The U.K's provision for maternity leave and child care is more generous than the U.S.A. or Australia but less than in the Scandinavian countries

  2. An Internatioal Comparison and Assessment of Maternity Leave Regulation

    OpenAIRE

    Dorothea Alewell, Kerstin Pull

    2001-01-01

    Provisions for maternity leave are common among industrialized countries, but their institutional design varies distinctly from country to country. Developing our theory on the impact on maternity leave regulations on women's labor market situation, we argue that a woman on leave creates a re-organization problem for her employer. The costs of re-organization will not simply increase with the duration of maternity leave, but display a hump-shaped curvature which peeks at medium-leave duration...

  3. (annonaceae) leaves-a potential antimalarial drug

    African Journals Online (AJOL)

    Xylopia species are widely available in West Africa. Xylopia parviflora (Benth) plant is used in folk medicine in the management of a number of ailments, one of these is the use of the leaves in the treatment of malaria fever for which a number of patients have reported its beneficial effects. This study was designed to ...

  4. leaves extract on mild steel in acid

    African Journals Online (AJOL)

    ADOWIE PERE

    The volume of the cathodic hydrogen gas evolved was also plotted as a .... prevent the escape of hydrogen gas. The volume .... Clivia nobilis leaves extract on the flow of current ... behaviour of ethanol extract of Piper guinensis as a green ...

  5. Borneol from Leaves of Blumea balsamifera

    African Journals Online (AJOL)

    and organic solvent of low boiling-point extract. At present ... localized at 800 m altitude, 25° 04´ N and 106°. 28´ E. The ... In HDSE, leaves and water were used in similar amounts .... rate of (–)-borneol did not increase significantly. (p > 0.05) ...

  6. Thaumatococcus daniellii leaves: its chemical compositions ...

    African Journals Online (AJOL)

    Methanol extract of the plant exhibited low 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity with IC50 of 615.14 μg/ml. Gas chromatography-mass spectrometry (GC-MS) characterization of n-hexane, ethylacetate and methanol extracts of T. daniellii leaves identified , thirteen and fifteen compounds, with ...

  7. Fungi colonizing dead leaves of herbs

    Directory of Open Access Journals (Sweden)

    Maria Kowalik

    2013-04-01

    Full Text Available The material was collected from the Botanical Garden and the Collegium Medicum Medicinal Plant Garden of the Jagiellonian University in Krakow. The investigated species were: lemon balm (Mellisa officinalis L., common lavender (Lavendula angustifolia Mill., horsemint (Mentha longifolia L., sage (Salvia officinalis L., sweet basil (Ocimum basilicum L., and wild marjoram (Origanum vulgare L.. The aim of the investigation was to identify fungi causing the death of leaf tissues of herbs from the mint family Lamiaceae. In mycological investigations, 180 fragments of each plant leaves (1,080 dead leaf fragments in total were placed in a 2% PDA medium. Over 970 colonies of fungi belonging to 48 species were isolated from the dead leaf tissues of the six herb species. Alternaria alternata (toxin-producing, Epicoccum nigrum and Sordaria fimicola were the most frequently isolated. The largest numbers of colonies and species of fungi were isolated from horsemint, while the lowest numbers were from wild marjoram leaves. It was shown that the death of leaves of selected herb species from the Lamiaceae family was caused by various fungi. The results of the mycological analysis confirmed the diversity of species colonizing the leaves of the herbs.

  8. Comparative morphology on leaves of Daphniphyllum (Daphniphyllaceae)

    NARCIS (Netherlands)

    Tang, M.-S.; Yang, Y.-P.; Sheue, C.-R.

    2009-01-01

    A comparative anatomical study on the leaves of nine out of 29 species of the genus Daphniphyllum was performed to seek support for the present infrageneric classification. Daphniphyllum is composed of two sections, Lunata (with one subsection Lunata) and Daphniphyllum (with two subsections,

  9. Fathers on Parental Leave in Denmark

    DEFF Research Database (Denmark)

    Reinicke, Kenneth; Cybulski, Franz Wilhelm; Drews, Lea Vedel

    2005-01-01

    In the article it is argued that contemporary fatherhood and masculinity differ increasingly from hegemonic masculinity according to which men are primarily responsible for ensuring the financial basis of the family. The article “Fathers on Parental Leave in Denmark”, based on interviews with 15...

  10. Ladybugs and Lettuce Leaves. Teachers' Manual.

    Science.gov (United States)

    Barnes, Tracy; And Others

    This is a guide for use with "Ladybugs and Lettuce Leaves" activity cards which are activities for elementary school students (grades 4 to 6) focusing on gardening. It includes educational objectives for each topic as well as lists of vocabulary words, comments, questions for discussion, additional activities, and resources. An interdisciplinary…

  11. Tomato leaves methanol extract possesses antiinflammatory activity ...

    African Journals Online (AJOL)

    Recently, the leaves of tomato plant that contained several active compounds including alkaloid, steroid and flavanoid has been used for the treatment of variety of diseases and as anti-cancer, antioxidant and anti-gout. Although, a number of pharmacological properties have already been demonstrated, the ...

  12. Leave no trace in the outdoors

    Science.gov (United States)

    Marion, Jeffrey L.

    2014-01-01

    The essential guide for enjoying the outdoors without harming the environment. - Details the seven core principles of Leave No Trace ethics and practices - Covers hiking, campfires, food storage, and personal hygiene - Endorsed by the USDI National Park Service, Bureau of Land Management, Fish & Wildlife Service, U.S. Geological Survey, and the USDA Forest Service

  13. Isolation of chlorophyll a from spinach leaves

    Directory of Open Access Journals (Sweden)

    E.D. Dikio

    2008-08-01

    Full Text Available An efficient method for separating chlorophyll a from spinach leaves by column chromatography and solvent extraction techniques has been developed. The purity and identity of the chlorophyll a have been confirmed by UV-Vis, IR and mass spectrometry. Yields from 100 g of freeze-dried spinach were 23 – 24 mg of chlorophyll a.

  14. Why Nannies Leave Their Employing Families.

    Science.gov (United States)

    Olsen, Glenn

    The position of nanny as a career option for child care/child development/early childhood education graduates is examined. This study surveyed nannies randomly selected from the 1991 International Nanny Association Directory to determine why nannies leave their employing families. Surveys were mailed to 160 nannies; 62 (39%) nannies responded.…

  15. Talking Leaves, Volume 4, No. 4

    OpenAIRE

    Center for Research on Education, Diversity & Excellence

    2000-01-01

    Talking Leaves, Spring 2000, Articles: Classroom and Schoolwide Observation Under the Microscope Observing School Restructuring in Multicultural, Multilingual Contexts From the Other Side of the Classroom Looking for Findings in all the Right Places The Classroom Observation Schedule and the Teacher Roles Observation Schedule The Standards Performance Continuum: Measuring CREDE's Standards for Effective Pedagogy The Kentu...

  16. Extraction of radioactive cesium from tea leaves

    International Nuclear Information System (INIS)

    Yano, Yukiko; Kubo, M. Kenya; Higaki, Shogo; Hirota, Masahiro; Nomura, Kiyoshi

    2011-01-01

    Radioactive contamination of foodstuffs attributed to the Fukushima Daiichi nuclear disaster has become a social problem. This study investigated the extraction of radioactive cesium from the contaminated leaves to the tea. The green tea was brewed twice reusing the same leaves to study the difference in extraction of cesium between the first and second brew. Moreover, the extraction of cesium was studied in correlation to brewing time. The concentration of radioactive cesium was determined with gamma spectrometry, and the concentration of caffeine was determined with absorption spectrometry. About 40% of cesium was extracted from leaves in the first brew, and about 80% was extracted in the second brew. The extraction of cesium increased over time, and it reached about 80% after 10 minutes brew. The ratio of radioactive cesium to caffeine decreased linearly over time. This study revealed that the extraction of cesium was higher for the second brew, and a rapid increase in extraction was seen as the tea was brewed for 6 minutes and more. Therefore, the first brew of green tea, which was brewed within 5 minutes, contained the least extraction of radioactive cesium from the contaminated leaves. (author)

  17. Maternity leave duration and postpartum mental and physical health: implications for leave policies.

    Science.gov (United States)

    Dagher, Rada K; McGovern, Patricia M; Dowd, Bryan E

    2014-04-01

    This study examines the association of leave duration with depressive symptoms, mental health, physical health, and maternal symptoms in the first postpartum year, using a prospective cohort design. Eligible employed women, eighteen years or older, were interviewed in person at three Minnesota hospitals while hospitalized for childbirth in 2001. Telephone interviews were conducted at six weeks (N = 716), twelve weeks (N = 661), six months (N = 625), and twelve months (N = 575) after delivery. Depressive symptoms (Edinburgh Postnatal Depression Scale), mental and physical health (SF-12 Health Survey), and maternal childbirth-related symptoms were measured at each time period. Two-stage least squares analysis showed that the relationship between leave duration and postpartum depressive symptoms is U-shaped, with a minimum at six months. In the first postpartum year, an increase in leave duration is associated with a decrease in depressive symptoms until six months postpartum. Moreover, ordinary least squares analysis showed a marginally significant linear positive association between leave duration and physical health. Taking leave from work provides time for mothers to rest and recover from pregnancy and childbirth. Findings indicate that the current leave duration provided by the Family and Medical Leave Act, twelve weeks, may not be sufficient for mothers at risk for or experiencing postpartum depression.

  18. Access to paid parental leave for academic surgeons.

    Science.gov (United States)

    Itum, Dina S; Oltmann, Sarah C; Choti, Michael A; Piper, Hannah G

    2018-01-31

    Parental leave is linked to health benefits for both child and parent. It is unclear whether surgeons at academic centers have access to paid parental leave. The aim of this study was to determine parental leave policies at the top academic medical centers in the United States to identify trends among institutions. The top academic medical centers were identified (US News & World Report 2016). Institutional websites were reviewed, or human resource departments were contacted to determine parental leave policies. "Paid leave" was defined as leave without the mandated use of personal time off. Institutions were categorized based on geographical region, funding, and ranking to determine trends regarding availability and duration of paid parental leave. Among the top 91 ranked medical schools, 48 (53%) offer paid parental leave. Availability of a paid leave policy differed based on private versus public institutions (70% versus 38%, P leaves (>6 wk) than public institutions (67% versus 33%; P = 0.02). No difference in paid leave duration was noted based on region (P = 0.60) or rank (P = 0.81). Approximately, 50% of top academic medical centers offer paid parental leave. Private institutions are more likely to offer paid leave and leave of longer duration. There is considerable variability in access to paid parenteral leave for academic surgeons. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Causes and Consequences of a Father's Child Leave: Evidence from a Reform of Leave Schemes

    DEFF Research Database (Denmark)

    Nielsen, Helena Skyt

    are the most progressive when it comes to family-friendly policies. An extensive reform of child leave schemes in Denmark affected couples differently depending on whether the parents where employed in the same or in different parts of the public sector. Based on a difference-in-differences strategy, I find...... that economic incentives are very important for intra-household leave-sharing. Increasing the couples' after tax income by $9 per day of leave which is transferred from the mother to the father is found to lead to a one day transfer. This corresponds to a supply elasticity close to unity....

  20. Medical Device Safety

    Science.gov (United States)

    A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

  1. Father's Rights to Paid Parental Leave in the Nordic Countries

    DEFF Research Database (Denmark)

    Rostgaard, Tine; Haas, L.

    2011-01-01

    to what extent government-provided, paid parental leave and quotas for fathers could bring about equality in the division of leave between men and women by focusing on the pioneers in the field, the Nordic countries – the first nations to offer fathers parental leave and introduce quotas. First, we......European Union policy encourages men and women to share parental leave to balance work and family life and promote gender equality in the labor market. A new directive extends parental leave to four months and introduces a quota, so one month is reserved for each parent. This article explores...... describe the extent to which parental leave policies have been established and implemented in a way that is likely to promote equal sharing of leave. Next, we evaluate the impact of particular configurations of gender equality incentives in present parental leave policies for the actual division of leave...

  2. Implantable electronic medical devices

    CERN Document Server

    Fitzpatrick, Dennis

    2014-01-01

    Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

  3. Women's Reasons for Leaving the Engineering Field.

    Science.gov (United States)

    Fouad, Nadya A; Chang, Wen-Hsin; Wan, Min; Singh, Romila

    2017-01-01

    Among the different Science, Technology, Engineering, and Math fields, engineering continues to have one of the highest rates of attrition (Hewlett et al., 2008). The turnover rate for women engineers from engineering fields is even higher than for men (Frehill, 2010). Despite increased efforts from researchers, there are still large gaps in our understanding of the reasons that women leave engineering. This study aims to address this gap by examining the reasons why women leave engineering. Specifically, we analyze the reasons for departure given by national sample of 1,464 women engineers who left the profession after having worked in the engineering field. We applied a person-environment fit theoretical lens, in particular, the Theory of Work Adjustment (TWA) (Dawis and Lofquist, 1984) to understand and categorize the reasons for leaving the engineering field. According to the TWA, occupations have different "reinforcer patterns," reflected in six occupational values, and a mismatch between the reinforcers provided by the work environment and individuals' needs may trigger departure from the environment. Given the paucity of literature in this area, we posed research questions to explore the reinforcer pattern of values implicated in women's decisions to leave the engineering field. We used qualitative analyses to understand, categorize, and code the 1,863 statements that offered a glimpse into the myriad reasons that women offered in describing their decisions to leave the engineering profession. Our results revealed the top three sets of reasons underlying women's decision to leave the jobs and engineering field were related to: first, poor and/or inequitable compensation, poor working conditions, inflexible and demanding work environment that made work-family balance difficult; second, unmet achievement needs that reflected a dissatisfaction with effective utilization of their math and science skills, and third, unmet needs with regard to lack of recognition

  4. Japanese tea leaves: a possible biological standard reference material

    International Nuclear Information System (INIS)

    Fuwa, Keiichiro; Notsu, Kenji; Tsunoda, Kin-ichi; Kato, Hideaki; Yamamoto, Yuko.

    1978-01-01

    Japanese Tea Leaves, prepared by pulverizing with an agate ball mill and sieving with a Saran fiber sieve (50 mesh) were assessed as a possible biological standard reference material for elemental analysis. The metal content of the tea leaves was determined independently at two laboratories using atomic absorption and flame emission spectrometry. Neutron activation analysis was also performed to determine the content (21 elements) of Tea Leaves. For some elements the result from the various methods were compared. The characteristics of Tea Leaves are discussed and the elemental composition is compared to that of Orchard Leaves (NBS SRM, 1571). The most significant characteristic of Tea Leaves was the high manganese content. (auth.)

  5. Don’t leave your baggage unattended

    CERN Multimedia

    2016-01-01

    “Don’t leave your baggage unattended” is a familiar request to anyone who travels by air, but it’s good advice wherever you may be.    At CERN, if an unattended bag is found anywhere on the site, the Fire and Rescue service will be called to evacuate the area, maintain a security perimeter for as long as necessary, and attempt to identify the owner. If the owner cannot be found in a reasonable amount of time, there’s a very strong chance that the bag will be destroyed. You can take two simple steps to avoid this fate: Don’t leave your baggage unattended;   Make sure that your contact details are clearly visible on the bag or suitcase so that, should you find yourself separated from it, you can easily be reunited.

  6. Multimedia techniques for device and ambient intelligence: A continuing endeavor

    NARCIS (Netherlands)

    van den Broek, Egon

    2011-01-01

    The edited volume "Multimedia techniques for device and ambient intelligence" consists of two parts: i) an introduction to a variety of basic low level image processing techniques, leaving aside other modalities, and ii) work on high level, knowledge based processing, including interesting chapters

  7. ANTIANAPHYLACTIC ACTIVITY OF HELIOTROPIUM INDICUM LEAVES

    OpenAIRE

    M Shenoy Ashoka; C. Shastry Shashidhar

    2011-01-01

    The alcoholic extract of Heliotropium indicum leaves was evaluated using Wistar rats and Duncan Hartley guinea pigs. The antianaphylactic activity was investigated in rats using the active anaphylaxis model. The effect on mast cell stabilization was performed by ex vivo challenge of antigen in sensitized rat intestinal mesenteries. Antihistaminic activity was studied in guinea pigs using histamine-induced bronchospasm where preconvulsive dyspnea was used as an end point following exposure to ...

  8. Texture and wettability of metallic lotus leaves

    Science.gov (United States)

    Frankiewicz, C.; Attinger, D.

    2016-02-01

    Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional coatings opens the way to large scale and robust manufacturing of superrepellent surfaces.Superhydrophobic surfaces with the self-cleaning behavior of lotus leaves are sought for drag reduction and phase change heat transfer applications. These superrepellent surfaces have traditionally been fabricated by random or deterministic texturing of a hydrophobic material. Recently, superrepellent surfaces have also been made from hydrophilic materials, by deterministic texturing using photolithography, without low-surface energy coating. Here, we show that hydrophilic materials can also be made superrepellent to water by chemical texturing, a stochastic rather than deterministic process. These metallic surfaces are the first analog of lotus leaves, in terms of wettability, texture and repellency. A mechanistic model is also proposed to describe the influence of multiple tiers of roughness on wettability and repellency. This demonstrated ability to make hydrophilic materials superrepellent without deterministic structuring or additional

  9. Sickness presence, sick leave and adjustment latitude

    Directory of Open Access Journals (Sweden)

    Joachim Gerich

    2014-10-01

    Full Text Available Objectives: Previous research on the association between adjustment latitude (defined as the opportunity to adjust work efforts in case of illness and sickness absence and sickness presence has produced inconsistent results. In particular, low adjustment latitude has been identified as both a risk factor and a deterrent of sick leave. The present study uses an alternative analytical strategy with the aim of joining these results together. Material and Methods: Using a cross-sectional design, a random sample of employees covered by the Upper Austrian Sickness Fund (N = 930 was analyzed. Logistic and ordinary least square (OLS regression models were used to examine the association between adjustment latitude and days of sickness absence, sickness presence, and an estimator for the individual sickness absence and sickness presence propensity. Results: A high level of adjustment latitude was found to be associated with a reduced number of days of sickness absence and sickness presence, but an elevated propensity for sickness absence. Conclusions: Employees with high adjustment latitude experience fewer days of health complaints associated with lower rates of sick leave and sickness presence compared to those with low adjustment latitude. In case of illness, however, high adjustment latitude is associated with a higher pro­bability of taking sick leave rather than sickness presence.

  10. Acute Toxicity of Justicia gendarussa Burm. Leaves

    Directory of Open Access Journals (Sweden)

    Juheini Amin

    2010-11-01

    Full Text Available Acute Toxicity of Justicia gendarussa Burm. Leaves. Preminelary experiment showed that ethanolic extract ofgandarusa leaves (Justicia gendarussa Burm. could decreased uric acid blood level on rats. The aim of this experimentwas to determine of the value LD50 and liver function based on activities of aminotransferase. Animals test which wereused in this experiment were 50 males and 50 females white mice. They were divided into 5 groups. Group 1 as controlgroup was given aquadest. Group 2-5 were treated by ethanolic extract of gandarusa leaves with dosage 4, 8, 16, and 32g/kg bw. The LD50 value was determined by the amount of death in group during 24 hours after giving a single dose oftest substance. The result showed that the highest dose was practically non toxic with LD50 value of 31.99 g/kg bw(male groups and 27.85 g/kg bw (female groups. Measurement of aminotransferase activity was done by usingcolorimetric method. The result of ANOVA analysis for liver function showed that the giving test substance 4 g/kg bw–16 g/kg bw was not significantly different between treated groups and control group.

  11. Hip supporting device

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a device for limiting movements in one or more anatomical joints, such as a device for limiting movement in the human hip joint after hip replacement surgery. This is provided by a device for limiting movement in the human hip joint, said device comprising: at least...

  12. FLUIDICS DEVICE FOR ASSAY

    DEFF Research Database (Denmark)

    2007-01-01

    The present invention relates to a device for use in performing assays on standard laboratory solid supports whereon chemical entities are attached. The invention furthermore relates to the use of such a device and a kit comprising such a device. The device according to the present invention is a...

  13. Turning palm leaves into wood: Opportunities for Egypt's rural ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-27

    Apr 27, 2016 ... Bedouin women weave handmade baskets, hats, and lamps using dried palm leaves. ... palm tree leaves into hardwood and high-quality wooden products, ... of wood and open doors to job opportunities for rural communities.

  14. Power source device for thermonuclear device

    International Nuclear Information System (INIS)

    Ozaki, Akira.

    1992-01-01

    The present invention provides a small sized and economical power source device for a thermonuclear device. That is, the device comprises a conversion device having a rated power determined by a power required during a plasma current excitation period and a conversion device having a rated power determined by a power required during a plasma current maintaining period, connected in series to each other. Then, for the former conversion device, power is supplied from an electric power generator and, for the latter, power is supplied from a power system. With such a constitution, during the plasma electric current maintaining period for substantially continuous operation, it is possible to conduct bypassing paired operation for the former conversion device while the electric power generator is put under no load. Further, since a short period rated power may be suffice for the former conversion device and the electric power generator having the great rated power required for the plasma electric current excitation period, they can be reduced in the size and made economical. On the other hand, since the power required for the plasma current maintaining period is relatively small, the capacity of the continuous rated conversion device may be small, and the power can be received from the power system. (I.S.)

  15. The Length of Maternity Leave and Family Health

    OpenAIRE

    Beuchert, Louise Voldby; Humlum, Maria Knoth; Vejlin, Rune Majlund

    2014-01-01

    We study the relationship between the length of maternity leave and the physical and psychological health of the family. Using a reform of the parental leave scheme in Denmark that increased the number of weeks of leave with full benefit compensation,we estimate the effect of the length of maternity leave on a range of health indicators including the number of hospital admissions for both mother and child and the probability of the mother receiving antidepressants. The reform led to an increa...

  16. Influence of maternity leave on exclusive breastfeeding

    Directory of Open Access Journals (Sweden)

    Fernanda R. Monteiro

    2017-09-01

    Full Text Available Objectives: To describe the profile of women with children aged under 4 months living in the Brazilian state capitals and in the Federal District according to their working status and to analyze the influence of maternity leave on exclusive breastfeeding (EBF among working women. Methods: This was a cross-sectional study with data extracted from the II National Maternal Breastfeeding Prevalence Survey carried out in 2008. Initially, a descriptive analysis of the profile of 12,794 women was performed, according to their working status and maternity leave and the frequency of maternity leave in the Brazilian regions and capitals. The study used a multiple model to identify the influence of maternity leave on EBF interruption, including 3766 women who declared they were working and were on maternity leave at the time of the interview. The outcome assessed in the study was the interruption of the EBF, classified by the WHO. Results: Regarding the working status of the mothers, 63.4% did not work outside of their homes and among those who worked, 69.8% were on maternity leave. The largest prevalence among workers was of women older than 35 years of age, with more than 12 years of schooling, primiparous and from the Southeast and South regions. The lack of maternity leave increased by 23% the chance of EBF interruption. Conclusion: Maternity leave contributed to increase the prevalence of EBF in the Brazilian states capitals, supporting the importance of increasing the maternity leave period from four to six months. Resumo: Objetivos: Descrever perfil das mulheres com filhos menores de 4 meses residentes nas capitais brasileiras e no Distrito Federal segundo situação de trabalho e analisar a influência da licença-maternidade sobre o aleitamento materno exclusivo entre as mulheres trabalhadoras. Métodos: Trata-se de um estudo transversal com dados extraídos da II Pesquisa Nacional de Prevalência do Aleitamento Materno realizada em 2008

  17. STUDY OF ORGANIC ACIDS IN ALMOND LEAVES

    Directory of Open Access Journals (Sweden)

    Lenchyk L.V.

    2015-05-01

    Full Text Available Introduction. Almond (Amygdalus communis is a stone fruit, from the Rosaceae family, closest to the peach. It is spread throughout the entire Mediterranean region and afterwards to the Southwestern USA, Northern Africa, Turkey, Iran, Australia and South Africa. It is sensitive to wet conditions, and therefore is not grown in wet climates. Iran is located in the semi-arid region of the world. Because of its special tolerance to water stress, almond is one of the main agricultural products in rainfed condition in Iran. Almond leaves have been investigated for their phenolic content and antioxidant activity. It was found that total antioxidant activity and phenolic compounds exhibited variations according to season, plant organ (leaf and stem and variety. Analysis of previous research on almonds focused on investigating compounds mostly in seeds and phenolic compounds in leaves, but organic acids in leaves have not been studied. Aim of this study was investigation of organic acids in leaves of almond variety which is distributed in Razavi Khorasan province of Iran. Materials and Methods. In August 2012 almond leaves were collected in Iran, dried and grinded. The study of qualitative composition and quantitative determination of carboxylic acids in almond leaves was carried out by gas chromatography with mass spectrometric detection. For determination organic acids content, to 50 mg of dried plant material in 2 ml vial internal standard (50 μg of tridecane in hexane was added and filled up with 1.0 ml of methylating agent (14 % BCl3 in methanol, Supelco 3-3033. The mixture was kept in a sealed vial during 8 hours at 65 °C. At this time fatty oil was fully extracted, and hydrolyzed into its constituent fatty acids and their methylation was done. At the same time free organic and phenolcarbonic acids were methylated too. The reaction mixture was poured from the plant material sediment and was diluted with 1 ml of distilled water. To extract methyl

  18. 5 CFR 630.1206 - Notice of leave.

    Science.gov (United States)

    2010-01-01

    ... medical treatment, the employee shall provide notice to the agency of his or her intention to take leave... placement or planned medical treatment requires leave to begin within 30 calendar days, the employee shall... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Notice of leave. 630.1206 Section 630...

  19. 48 CFR 752.7031 - Leave and holidays.

    Science.gov (United States)

    2010-10-01

    ... States (less language training) and the actual days overseas beginning on the date of departure from the.... (e) Military leave. Military leave of not more than 15 calendar days in any calendar year may be... such military leave has been approved in advance by the cognizant Mission Director or Assistant...

  20. Determinants of sick-leave duration : A tool for managers?

    NARCIS (Netherlands)

    Flach, P.A.; Krol, B.; Groothoff, J.W.

    AIMS: To provide managers with tools to manage episodes of sick-leave of their employees, the influence of factors such as age, gender, duration of tenure, working full-time or part-time, cause and history of sick-leave, salary and education on sick-leave duration was studied. METHOD: In a

  1. 77 FR 22519 - The Family and Medical Leave Act

    Science.gov (United States)

    2012-04-16

    ... Family and Medical Leave Act AGENCY: Wage and Hour Division, Department of Labor. ACTION: Extension of... on the proposed revisions to certain regulations of the Family and Medical Leave Act of 1993 (FMLA... Family and Medical Act (FMLA) regulations to implement amendments to the military leave provisions of the...

  2. Self-Funded Leave and Life Role Development

    Science.gov (United States)

    Furbish, Dale S.

    2009-01-01

    Self-funded leave is an employee benefit that provides a time resource to those who wish to develop interests and other life roles. Semistructured interviews were used for this qualitative study to explore the motivations for enrolling in the self-funded leave program, how the leave contributed to work-life balance through development of other…

  3. Konference Fathers and Paternity Leave: Men Do It

    Czech Academy of Sciences Publication Activity Database

    Maříková, Hana

    2006-01-01

    Roč. 42, č. 14 (2006), s. 833-835 ISSN 0038-0288. [Fathers and Paternity Leave: Men Do It] R&D Projects: GA AV ČR IAA700280504 Institutional research plan: CEZ:AV0Z70280505 Keywords : parental leave * paternity leave * fathering Subject RIV: AO - Sociology, Demography Impact factor: 0.128, year: 2006

  4. Maternity Leave Provisions for Classroom Teachers in Larger School Systems.

    Science.gov (United States)

    Educational Research Service Circular, 1966

    1966-01-01

    Maternity leave provisions for classroom teachers in 129 school systems having enrollments of 25,000 or more are reported for 1965-66 in this national survey. Tables contain information on compulsory absence prior to anticipated date of birth and earliest permissible return from maternity leaves. Brief descriptions of maternity leave practices are…

  5. External versus Internal Distraction Devices in Treatment of Obstructive Sleep Apnea in Craniofacial Anomalies

    Directory of Open Access Journals (Sweden)

    Adi Rachmiel, DMD, PhD

    2014-07-01

    Conclusions: Internal devices should be the first choice because they are more comfortable to the patients, more predictable vector of lengthening, are less vulnerable to dislodgement, and leave reduced scarring, with the great disadvantage of second operation for removal. However, external devices still should be considered mainly in severely hypoplastic cases, and the surgeon should be prepared for both options.

  6. The Necessary Death of the Block Device Interface

    DEFF Research Database (Denmark)

    Bjørling, Matias; Bonnet, Philippe; Bouganim, Luc

    2013-01-01

    that this option amounts to building on quicksand. We illustrate our point by debunking some popular myths about flash devices and by pointing out mistakes in the papers we have published throughout the years. The second option is to abandon the simple abstraction of the block device interface and reconsider how...... device interface. This is the mainstream option both in industry and academia. This leaves the storage and OS communities with the responsibility to deal with the complexity introduced by SSDs in the hope that they will provide us with a robust, yet simple, performance model. In this paper, we show...

  7. Early school leaving and lifelong guidance

    DEFF Research Database (Denmark)

    Plant, Peter; Oomen, Annemarie

    Early school leaving (ESL) is costly for the individual, for society and for the economy. Not just in economic terms, but also in terms of low self esteem, and the risk of social exclusion. More, and, in particular, better education can lead to positive outcomes, in relation to employment, level...... of salaries, better health, less crime, higher social cohesion, lower public and social costs and higher productivity. This is why ESL is a policy focal point. In these terms, lifelong guidance has a key role to play in terms of both prevention, intervention, and of compensation strategies....

  8. Impact of Ozone Gradient on Grapevine Leaves

    Science.gov (United States)

    Alebic-Juretic, Ana; Bokan-Vucelic, Itana; Mifka, Boris; Zatezalo, Marija; Zubak, Velimir

    2017-04-01

    Due to complex orography and air mass circulation, the Rijeka Bay area is characterized by O3 gradient, with concentrations risen with the altitude (1). Therefore AOT40 values were often exceeded and should result in harmful effects on vegetation. Based on previous controlled experiments (2), we examined the possible effect of atmospheric ozone on grape leaves under natural O3 gradient. Grapevine leaves (2-5) were collected from May to September 2016 at two sampling points in the proximity of two AQM stations: Site 1 in the city centre (20m asl) and Site 2 (186m asl) in the suburban settlement. Subsequent to weighing and determination of surface area, the leaves (0,5 g) were extracted in 95% ethanol and analysed on chlorophyl a (Chla), chlorophyl b (Chlb) and carotene (Car) content by UV-VIS spectrometry on 3 wavelengths (664, 649, 470 nm) (3) In summer 2016 O3 gradient was not that pronounced as usual (1), but stil the concentrations differed by approx. 20%, exceeding national AOT40 value at both sites (22.360 and 28.061 μg m-3 h, respectively, at Sites 1 and 2). The concentrations of other pollutants were bellow limit values (LV). The Cha and Chb in a sample leaves collected at the end of May at Site 2 are equal to that with filtered O3 in control experiment (2), i.e. without damage caused by ozone, while the Car content is lower approx. 50% and is kept at the same level. The con-centrations of pigments obtained in July prooved the possible damage by O3, while in subsequent months could speed up natural ageing. This is the first evidence of O3 damage on plants in the Rijeka Bay area, in spite of weaker O3 gradient and lacking visible signs of damage. Preliminary results indicate the need for more frequent sampling, particularly in the period included in AOT40 (May-July). References: 1. Alebić-Juretić A (2012) Int J Remote Sensing, 33(2): 335-345 2. Britvec M, Reichenauer T, Soja G., Ljubešić N, Pećina M (2001) Biologia (Bratislava),56/4: 417-424 3. Sumanata

  9. Gender codes why women are leaving computing

    CERN Document Server

    Misa, Thomas J

    2010-01-01

    The computing profession is facing a serious gender crisis. Women are abandoning the computing field at an alarming rate. Fewer are entering the profession than anytime in the past twenty-five years, while too many are leaving the field in mid-career. With a maximum of insight and a minimum of jargon, Gender Codes explains the complex social and cultural processes at work in gender and computing today. Edited by Thomas Misa and featuring a Foreword by Linda Shafer, Chair of the IEEE Computer Society Press, this insightful collection of essays explores the persisting gender imbalance in computing and presents a clear course of action for turning things around.

  10. Take It, Leave It, Fold It

    DEFF Research Database (Denmark)

    Elias, Camelia

    2008-01-01

    This introduction to the volume sets the tone for a reading experience of Federman's works. Since the early 60s, Raymond Federman has been one of the most important American writers. In his highly experimental fictions, in works that bear such titles as Take It or Leave It, Double or Nothing......, and The Twofold Vibrations, he has explored cultural and personal memory, invented intricate narrative strategies, and above all has given readers an experience that exceeds the ordinary. Creating situations that make one really think and really laugh is a tall order for any writer. But Federman did it. He is one...

  11. Flavonoids from the Leaves of Impatiens bicolor

    OpenAIRE

    TAHIR, Aurangzeb HASAN and Muhammad Nawaz

    2005-01-01

    Three new flavanone glycosides, naringenin 4'-O-b-D-glucuronopyranoside, naringenin 4'-O-a-L rham\\-nopyranoside and naringenin 4'-O-b-D-xylopyranoside, were characterized from the leaves of Impatiens bicolor, together with 6 known glycosides: naringenin 4'-O-b-D-glucopyranoside, kaempferol 7-O-b-D-glucuronopyranoside, quercetin 3-O-b-D-glucopyranoside, kaempferol 5-O-b-D-xylopyranoside, kaempferol 3-O-b-D-galactopyranoside and kaempferol 7-O-b-D-xylopyranoside. The...

  12. Flavonoids from the Leaves of Impatiens bicolor

    OpenAIRE

    TAHIR, Aurangzeb HASAN and Muhammad Nawaz; HASAN, Aurangzeb

    2014-01-01

    Three new flavanone glycosides, naringenin 4'-O-b-D-glucuronopyranoside, naringenin 4'-O-a-L rham\\-nopyranoside and naringenin 4'-O-b-D-xylopyranoside, were characterized from the leaves of Impatiens bicolor, together with 6 known glycosides: naringenin 4'-O-b-D-glucopyranoside, kaempferol 7-O-b-D-glucuronopyranoside, quercetin 3-O-b-D-glucopyranoside, kaempferol 5-O-b-D-xylopyranoside, kaempferol 3-O-b-D-galactopyranoside and kaempferol 7-O-b-D-xylo...

  13. Terpenoid constituents from leaves of Guarea kunthiana

    International Nuclear Information System (INIS)

    Garcez, Fernanda R.; Garcez, Walmir S.; Bazzo, Rita de Cassia; Silva, Ana Francisca G. da; Resende, Ubirazilda M.

    2004-01-01

    From leaves of Guarea kunthiana one new kaurene diterpene (ent-kaur-16-en-2-one) was isolated along with eight known diterpenes (ent-kaur-16-ene, ent-3α- and 3β-hydroxykaur-16-ene, kolavelool, kolavenol, kolavenal, ent-13-epi-manoyloxide and (-)-nephthenol), four sesquiterpenes (alismol, alismoxide, spathulenol and 4β,10α-aromadendranediol), polyprenol-12 and α- and δ-tocopherols. Kolavenal is reported for the first time as a natural product, as well as the occurrence of cembrane- and ent-kaurane-type diterpenes in the Meliaceae. (author)

  14. Flavones from the leaves of Ficus gomelleira

    Directory of Open Access Journals (Sweden)

    Amaral Daniel F.

    2001-01-01

    Full Text Available Two new flavones, 5 -hydroxy -7,5' -dimethoxy -3',4' -methylenedioxyflavone and 5 -hydroxy -7,3',5' -trimethoxy -4' -(3,3 -dimethylallyloxy flavone, as well as three known flavones: 5,6,7,3',4',5' -hexamethoxyflavone, 5 -hydroxy -8,3',4' -trimethoxy -2'',2'' -dimethylpyrano (5",6":6,7 -flavone and 5 -hydroxy -8,3',4',5' -tetramethoxy -2'',2'' -dimethylpyrano (5",6":6,7 -flavone were isolated from the leaves of Ficus gomelleira. Their structures were elucidated by spectroscopic methods and comparison with literature data.

  15. Optimum design for effective water transport through a double-layered porous hydrogel inspired by plant leaves

    Science.gov (United States)

    Kim, Hyejeong; Kim, Hyeonjeong; Huh, Hyungkyu; Hwang, Hyung Ju; Lee, Sang Joon

    2014-11-01

    Plant leaves are generally known to have optimized morphological structure in response to environmental changes for efficient water usage. However, the advantageous features of plant leaves are not fully utilized in engineering fields yet, since the optimum design in internal structure of plant leaves is unclear. In this study, the tissue organization of the hydraulic pathways inside plant leaves was investigated. Water transport through double-layered porous hydrogel models analogous to mesophyll cells was experimentally observed. In addition, computational experiment and theoretical analysis were applied to the model systems to find the optimal design for efficient water transport. As a result, the models with lower porosity or with pores distributed widely in the structure exhibit efficient mass transport. Our theoretical prediction supports that structural features of plant leaves guarantee sufficient water supply as survival strategy. This study may provide a new framework for investigating the biophysical principles governing the morphological optimization of plant leaves and for designing microfluidic devices to enhance mass transport ability. This study was supported by the National Research Foundation of Korea and funded by the Korean government.

  16. Sick Leave and Factors Influencing Sick Leave in Adult Patients with Atopic Dermatitis : A Cross-Sectional Study

    NARCIS (Netherlands)

    van Os-Medendorp, Harmieke; Appelman-Noordermeer, Simone; Bruijnzeel-Koomen, Carla A.F.M.; de Bruin-Weller, MS

    2015-01-01

    BACKGROUND: Little is known about the prevalence of sick leave due to atopic dermatitis (AD). The current literature on factors influencing sick leave is mostly derived from other chronic inflammatory diseases. This study aimed to determine the prevalence of sick leave due to AD and to identify

  17. Work-family balance after childbirth: the association between employer-offered leave characteristics and maternity leave duration.

    Science.gov (United States)

    Guendelman, Sylvia; Goodman, Julia; Kharrazi, Martin; Lahiff, Maureen

    2014-01-01

    Early return to work after childbirth has been increasing among working mothers in the US. We assessed the relationship between access to employer-offered maternity leave (EOML) (both paid and unpaid) and uptake and duration of maternity leave following childbirth in a socio-economically diverse sample of full-time working women. We focus on California, a state that has long provided more generous maternity leave benefits than those offered by federal maternity leave policies through the State Disability Insurance program. The sample included 691 mothers who gave birth in Southern California in 2002-2003. Using weighted logistic regression, we examined the EOML-maternity leave duration relationship, controlling for whether the leave was paid, as well as other occupational, personality and health-related covariates. Compared with mothers who were offered more than 12 weeks of maternity leave, mothers with leave had six times higher odds of an early return. These relationships were similar after controlling for whether the leave was paid and after controlling for other occupational and health characteristics. Access to and duration of employer-offered maternity leave significantly determine timing of return to work following childbirth, potentially affecting work-family balance. Policy makers should recognize the pivotal role of employers in offering job security during and after maternity leave and consider widening the eligibility criteria of the Family and Medical Leave Act.

  18. Parental Leave and Children's Schooling Outcomes: Quasi-Experimental Evidence from a Large Parental Leave Reform

    OpenAIRE

    Natalia Danzer; Victor Lavy

    2013-01-01

    This paper investigates the question whether long-term human capital outcomes are affected by the duration of maternity leave, i.e. by the time mothers spend at home with their newborn before returning to work. Employing RD and difference-in-difference approaches, this paper exploits an unanticipated reform in Austria which extended the maximum duration of paid and job protected parental leave from 12 to 24 months for children born on July 1, 1990 or later. We use test scores from the Austria...

  19. Absorption and translocation of phosphorus-32 in guava leaves

    International Nuclear Information System (INIS)

    Natale, William

    1997-01-01

    Phosphorus is easily absorbed by the leaves and translocated. The objective of this work was to evaluate the absorption and translocation of P by guava leaves, with time. When a solution containing 2% MAP and specific activity 0.15 μCi/ml was applied. MAP labelled with 32 P was applied in the 3 rd pair of leaves. These and other leaves, roots and stem were collected separately and analyzed accordingly. The results showed that 20 days after application 12% of the applied P was absorbed by the guava leaves. The translocation of P started immediately after its absorption reaching 20% 2fter 20 days. (author). 19 refs., 4 tabs

  20. Ozone injury and infection of potato leaves by Botrytis cinerea

    Energy Technology Data Exchange (ETDEWEB)

    Manning, W.J.; Feder, W.A.; Perkins, I.; Glickman, M.

    1969-09-01

    Symptoms of ozone injury were observed on older leaves of potato cultivars Norland and Katahdin under experimental conditions. This symptom expression closely resembled flecks observed on potato leaves also blighted by Botrytis cinerea in the field. Inoculation of ozone-injured and noninjured potato leaves with B. cinerea showed that infection was more rapid and disease development more severe on ozone-injured leaves. Infection was frequently observed to originate in ozone-injured leaf areas. Ozone injury, under experimental conditions, appeared to increase the susceptibility of potato leaves to infection by B. cinerea. 6 references.

  1. Maternity leave policies in academic and private radiology practices

    International Nuclear Information System (INIS)

    Spirt, B.A.; Rauth, V.; Price, A.P.F.; Pagani, A.H.

    1988-01-01

    In 1987, the American Association of Women Radiologists surveyed both academic and private radiology departments regarding pregnancy and maternity leave policies. One hundred academic institutions (70% response), 30 radiotherapy departments (38% response), and 31 private practices responded. Details were obtained regarding maternity leave policy for residents and attending physicians; availability of paternity leave; policies regarding on-call time, fluoroscopy time and intracavitary/interstitial applications during pregnancy; and problems that occurred during resident or attending physician pregnancies. There was a wide range of responses regarding paid leave time, availability of additional time, and the use of vacation time during maternity leave

  2. Research of photoinduced potentials of pepper leaves

    Directory of Open Access Journals (Sweden)

    D. V. Chernetchenko

    2015-09-01

    Full Text Available Bioelectrical potentials of the plants during photostimulation with various intensity values and wave lengths are studied. Suchstimulation provides light-dependent reactions of photosynthesis. The universal scheme of registration of bioelectric potentials, which allowsto carry out the experimental study of light stimuli effect on the plant is proposed. All registrations of potentials are observed on the pepper leaves. Photoinduced stimuli are different with intensity changed from 150 to 450 lux and different spectrums of white light and red light with wave length 690 nm. Different parameters of stimuli drive to different types of biopotentials of the plant, quantitative and qualitative relationships of this process are obtained. It is also found that bioelectrical reaction of the leaves is quantitatively different in various spectral ranges of light, but the quality remains the same for all cases, as shown in the study of bioelectric responses during exposure to the light in red spectrum range. The explanation of the additional depolarization phase that occurs during the running of dark reparative process of photosynthesis is given. Light-dependent reactions of photosynthesis are accompanied by significant changes in the electrical potential of chloroplasts’ membrane. Besides, the dependence of bioelectrical reaction of the plant on different spectra of light is found. By this way, biophysical relation of plant potentials to the intracellular biophysical mechanisms during photo stimulation is obtained.

  3. Enhancing Water Evaporation with Floating Synthetic Leaves

    Science.gov (United States)

    Boreyko, Jonathan; Vieitez, Joshua; Berrier, Austin; Roseveare, Matthew; Shi, Weiwei

    2017-11-01

    When a wetted nanoporous medium is exposed to a subsaturated ambient environment, the water menisci assume a concave curvature to achieve a negative pressure. This negative water pressure is required to balance the mismatch in water activity across the water-air interface to achieve local equilibrium. Here, we show that the diffusive evaporation rate of water can be greatly modulated by floating a nanoporous synthetic leaf at the water's free interface. For high ambient humidities, adding the leaf serves to enhance the evaporation rate, presumably by virtue of the menisci enhancing the effective liquid-vapor surface area. For low humidities, the menisci cannot achieve a local equilibrium and retreat partway into the leaf, which increases the local humidity directly above the menisci. In light of these two effects, we find the surprising result that leaves exposed to an ambient humidity of 90 percent can evaporate water at the same rate as leaves exposed to only 50 percent humidity. These findings have implications for using synthetic trees to enhance steam generation or water harvesting. This work was supported by the National Science Foundation (CBET-1653631).

  4. The Length of Maternity Leave and Family Health

    DEFF Research Database (Denmark)

    Beuchert-Pedersen, Louise Voldby; Humlum, Maria Knoth; Vejlin, Rune Majlund

    We study the relationship between the length of maternity leave and the physical and psychological health of the family. Using a reform of the parental leave scheme in Denmark that increased the number of weeks of leave with full benefit compensation, we estimate the effect of the lenght...... of maternity leave on a range of health indicators including the number of hospital admissions for both mother and child and the probability of the mother receiving antidepressants. The reform led to an increase in average post-birth maternity leave matters for child or maternal health outcomes and thus we...... complement the existing evidence on maternity leave expansions that tends to find limited effects on children's later deveopmental, educational, and labor market outcomes. Our results suggest that any beneficial effects of increasing the lenght of maternity leave are greater for low-resource families....

  5. Some notes on "Leaves of Memory", the autobiography of Hermann Kobold

    Science.gov (United States)

    Vollmer, R.; Vollmer, H.; Duerbeck, H. W.

    2004-12-01

    We briefly describe the life of the astronomer Hermann Kobold, who lived from 1858 to 1942. He worked at the observatories of O'Gyalla, Strasbourg and Kiel, and was also involved in the observations and reductions of the German Venus transit project, 1874/82. His autobiography spans the time between his youth and his leave from Strasbourg in 1902. The subsequent time as observer and professor in Kiel and long-time editor of the Astronomische Nachrichten is not covered. The autobiography "Blaetter der Erinnerung" (Leaves of memeory), presented in the subsequent article, was written in his late age when he was already blind, using a special device. We also present some photographs of Kobold and his contemporaries, taken in Gottingen, O'Gyalla, Aiken (South Carolina), and Strasbourg.

  6. Implantable Medical Devices

    Science.gov (United States)

    ... Artery Disease Venous Thromboembolism Aortic Aneurysm More Implantable Medical Devices Updated:Sep 16,2016 For Rhythm Control ... a Heart Attack Introduction Medications Surgical Procedures Implantable Medical Devices • Life After a Heart Attack • Heart Attack ...

  7. Devices for hearing loss

    Science.gov (United States)

    ... the sounds you want to hear. Assistive listening devices bring certain sounds directly to your ears. This can ... a small room or on a stage. Other devices can bring the sound from your TV, radio, or music ...

  8. Novel Magnetic Devices

    National Research Council Canada - National Science Library

    Schuller, Ivan

    2007-01-01

    ...: ballistic magnetoresistance, magnetic field proximity effect and spin drag. These three phenomena would then be exploited for the design of novel device architectures and to investigate the physical principles behind these devices...

  9. Smart devices are different

    DEFF Research Database (Denmark)

    Stisen, Allan; Blunck, Henrik; Bhattacharya, Sourav

    2015-01-01

    research results. This is due to variations in training and test device hardware and their operating system characteristics among others. In this paper, we systematically investigate sensor-, device- and workload-specific heterogeneities using 36 smartphones and smartwatches, consisting of 13 different...... device models from four manufacturers. Furthermore, we conduct experiments with nine users and investigate popular feature representation and classification techniques in HAR research. Our results indicate that on-device sensor and sensor handling heterogeneities impair HAR performances significantly...

  10. Heterostructures and quantum devices

    CERN Document Server

    Einspruch, Norman G

    1994-01-01

    Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical en

  11. Rooting an Android Device

    Science.gov (United States)

    2015-09-01

    1. Overview The purpose of this document is to demonstrate how to gain administrative privileges on an Android device. The term “rooting” is...is applicable for the Samsung Galaxy S3 as well as many other Android devices, but there are several steps involved in rooting an Android device (as...root access has been granted. 4. Conclusion This document serves as a tutorial on how to grant user administrative privilege to an Android device by

  12. Influenza in workplaces: transmission, workers' adherence to sick leave advice and European sick leave recommendations.

    Science.gov (United States)

    Edwards, Christina Hansen; Tomba, Gianpaolo Scalia; de Blasio, Birgitte Freiesleben

    2016-06-01

    Knowledge about influenza transmission in the workplace and whether staying home from work when experiencing influenza-like illness can reduce the spread of influenza is crucial for the design of efficient public health initiatives. This review synthesizes current literature on sickness presenteeism and influenza transmission in the workplace and provides an overview of sick leave recommendations in Europe for influenza. A search was performed on Medline, Embase, PsychINFO, Cinahl, Web of Science, Scopus and SweMed to identify studies related to workplace contacts, -transmission, -interventions and compliance with recommendations to take sick leave. A web-based survey on national recommendations and policies for sick leave during influenza was issued to 31 European countries. Twenty-two articles (9 surveys; 13 modelling articles) were eligible for this review. Results from social mixing studies suggest that 20-25% of weekly contacts are made in the workplace, while modelling studies suggest that on average 16% (range 9-33%) of influenza transmission occurs in the workplace. The effectiveness of interventions to reduce workplace presenteeism is largely unknown. Finally, estimates from studies reporting expected compliance with sick leave recommendations ranged from 71 to 95%. Overall, 18 countries participated in the survey of which nine (50%) had issued recommendations encouraging sick employees to stay at home during the 2009 A(H1N1) pandemic, while only one country had official recommendations for seasonal influenza. During the 2009 A(H1N1) pandemic, many European countries recommended ill employees to take sick leave. Further research is warranted to quantify the effect of reduced presenteeism during influenza illness. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association.

  13. Influenza in workplaces: transmission, workers’ adherence to sick leave advice and European sick leave recommendations

    Science.gov (United States)

    Tomba, Gianpaolo Scalia; de Blasio, Birgitte Freiesleben

    2016-01-01

    Background: Knowledge about influenza transmission in the workplace and whether staying home from work when experiencing influenza-like illness can reduce the spread of influenza is crucial for the design of efficient public health initiatives. Aim: This review synthesizes current literature on sickness presenteeism and influenza transmission in the workplace and provides an overview of sick leave recommendations in Europe for influenza. Methods: A search was performed on Medline, Embase, PsychINFO, Cinahl, Web of Science, Scopus and SweMed to identify studies related to workplace contacts, -transmission, -interventions and compliance with recommendations to take sick leave. A web-based survey on national recommendations and policies for sick leave during influenza was issued to 31 European countries. Results: Twenty-two articles (9 surveys; 13 modelling articles) were eligible for this review. Results from social mixing studies suggest that 20–25% of weekly contacts are made in the workplace, while modelling studies suggest that on average 16% (range 9–33%) of influenza transmission occurs in the workplace. The effectiveness of interventions to reduce workplace presenteeism is largely unknown. Finally, estimates from studies reporting expected compliance with sick leave recommendations ranged from 71 to 95%. Overall, 18 countries participated in the survey of which nine (50%) had issued recommendations encouraging sick employees to stay at home during the 2009 A(H1N1) pandemic, while only one country had official recommendations for seasonal influenza. Conclusions: During the 2009 A(H1N1) pandemic, many European countries recommended ill employees to take sick leave. Further research is warranted to quantify the effect of reduced presenteeism during influenza illness. PMID:27060594

  14. Photovoltaic device and method

    Science.gov (United States)

    Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

    2015-01-27

    The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

  15. Radioactive waste processing device

    International Nuclear Information System (INIS)

    Inaguma, Masahiko; Takahara, Nobuaki; Hara, Satomi.

    1996-01-01

    In a processing device for filtering laundry liquid wastes and shower drains incorporated with radioactive materials, a fiber filtration device is disposed and an activated carbon filtration device is also disposed subsequent to the fiber filtration device. In addition, a centrifugal dewatering device is disposed for dewatering spent granular activated carbon in the activated carbon filtration device, and a minute filtering device is disposed for filtering the separated dewatering liquid. Filtrates filtered by the minute filtration device are recovered in a collecting tank. Namely, at first, suspended solid materials in laundry liquid wastes and shower drains are captured, and then, ingredients concerning COD are adsorbed in the activated carbon filtration device. The radioactive liquid wastes of spent granular activated carbon in the activated carbon filtration device are reduced by dewatering them by the centrifugal dewatering device, and then the granular activated carbon is subjected to an additional processing. Further, it is separated by filtration using the minute filtration device and removed as cakes. Since the filtrates are recovered to the collecting tank and filtered again, the water quality of the drains is not degraded. (N.H.)

  16. Inspection device in liquid

    International Nuclear Information System (INIS)

    Nagaoka, Etsuo.

    1996-01-01

    The present invention provides an inspection device in PWR reactor core in which inspection operations are made efficient by stabilizing a posture of the device in front-to-back, vertical and left-to-right directions by a simple structure. When the device conducts inspection while running in liquid, the front and the back directions of the device main body are inspected using a visual device while changing the posture by operating a front-to-back direction propulsion device and a right-to-left direction propulsion device, and a vertical direction propulsion device against to rolling, pitching and yawing of the device main body. In this case, a spherical magnet moves freely in the gravitational direction in a vibration-damping fluid in a non-magnetic spherical shell following the change of the posture of the device main body, in which the vibrations due to the movement of the spherical magnet is settled by the vibration-damping fluid thereby stabilizing the posture of the device main body. At a typical inspection posture, the settling effect is enhanced by the attraction force between the spherical magnets in the spherical shell and each of magnetic force-attracted magnetic members disposed to the outer circumference of the shell, and the posture of the device main body can be confirmed in front-to-back, right-to-left and vertical directions by each of the posture confirming magnetic sensors. (N.H.)

  17. Containment and surveillance devices

    International Nuclear Information System (INIS)

    Campbell, J.W.; Johnson, C.S.; Stieff, L.R.

    The growing acceptance of containment and surveillance as a means to increase safeguards effectiveness has provided impetus to the development of improved surveillance and containment devices. Five recently developed devices are described. The devices include one photographic and two television surveillance systems and two high security seals that can be verified while installed

  18. Radiation emitting devices act

    International Nuclear Information System (INIS)

    1970-01-01

    This Act, entitled the Radiation Emitting Devices Act, is concerned with the sale and importation of radiation emitting devices. Laws relating to the sale, lease or import, labelling, advertising, packaging, safety standards and inspection of these devices are listed as well as penalties for any person who is convicted of breaking these laws

  19. Solar panel foundation device

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, W.W.

    1983-03-29

    A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

  20. Articulating feedstock delivery device

    Science.gov (United States)

    Jordan, Kevin

    2013-11-05

    A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.

  1. Maternity leave: existing policies in obstetrics and gynecology residency programs.

    Science.gov (United States)

    Davis, J L; Baillie, S; Hodgson, C S; Vontver, L; Platt, L D

    2001-12-01

    To survey program directors in obstetrics and gynecology regarding maternity leave and to determine how programs are dealing with maternity leave coverage. Questionnaires regarding impact and policy on maternity leave were mailed to accredited obstetrics and gynecology residency programs. A total of 188 of 274 (69%) questionnaires were returned completed. Respectively, 80% and 69% of respondents indicated that they have a formal maternity (maximum mean 8.7 weeks) and paternity (mean 5.27 days) leave policy. Approximately 75% of programs require residents to make up time if their leave exceeds 8 weeks during the first 3 years. Eighty-five percent of programs require residents to make up time if their leave exceeds 6 weeks during the fourth year. Ninety-three percent of programs require residents to make up time if their leave exceeds 20 weeks over the 4 years. Seventy-seven percent of respondents have other residents in their program cover for the absent resident. Thirty-seven percent of programs have schedules flexible enough to allow rearrangement so that some rotations go uncovered. Eighty-three percent of programs surveyed stated that maternity leave has a somewhat to very significant impact on the residents' schedules. Most residency programs have written maternity/paternity leave policies. A more flexible curriculum may help to accommodate the residents on leave without overburdening the residents who are left to cover.

  2. Flavonoids from leaves of Mauritia flexuosa

    Directory of Open Access Journals (Sweden)

    Djalma M. de Oliveira

    2013-09-01

    Full Text Available The chromatographic fractionation of the Mauritia flexuosa L. f., Arecaceae, leaves extract, a plant known by the name of buriti palm tree, resulted in the isolation of six flavonoids: tricin-7-O-rutinoside, apigenin-6-C-arabinoside, 8-C-glucoside (isoschaftoside, kaempferol-3-O-rutinoside (nicotiflorine, quercetin-3-O-rutinoside (rutin, luteolin-8-C-glucoside (orientin and luteolin-6-C-glucoside (isoorientin. The flavonoids were found out and previously reported as constituents of the Arecaceae family plants, but the occurrence of C-glucoside flavonoids, in the species being analyzed, is described for the first time on this study. The structural elucidations of all of the isolated compounds were performed by means of the comparison of their spectral data (¹H and 13C NMR, UV and ESI-MS with those ones of the literature.

  3. Green leaves as indicator for air pollution

    International Nuclear Information System (INIS)

    Abd Alla, A. A. M.

    2004-02-01

    Green leaves of Ficus (Ficus penegalensis) and Neem (Azadirachta indica) were analyzed for their trace metals (Pb, Zn and Cd) contents. The samples were collected and washed according to metal analysis standardization. Solutions of the samples for analysis were obtained by wet-digestion method using nitric perchloric acid mixture. The trace elements lead, zinc and cadmium were determined by Atomic Absorption Spectroscopic technique (AAS) for the 18 samples collected from Khartoum (Sharia elneel), Omdurman (Ombadda) and Khartoum North (Kadaro) as heavy-traffic, low-traffic areas and distal area, respectively. The species Ficus and Neem samples were collected each randomly from such areas. The samples were taken from the tips, mids and bottoms of each tree. (Author)

  4. Green leaves as indicator for air pollution

    Energy Technology Data Exchange (ETDEWEB)

    Abd Alla, A. A. M. [Department of Chemistry, Faculty of Science, University of Juba, Khartoum (Sudan)

    2004-02-15

    Green leaves of Ficus (Ficus penegalensis) and Neem (Azadirachta indica) were analyzed for their trace metals (Pb, Zn and Cd) contents. The samples were collected and washed according to metal analysis standardization. Solutions of the samples for analysis were obtained by wet-digestion method using nitric perchloric acid mixture. The trace elements lead, zinc and cadmium were determined by Atomic Absorption Spectroscopic technique (AAS) for the 18 samples collected from Khartoum (Sharia elneel), Omdurman (Ombadda) and Khartoum North (Kadaro) as heavy-traffic, low-traffic areas and distal area, respectively. The species Ficus and Neem samples were collected each randomly from such areas. The samples were taken from the tips, mids and bottoms of each tree. (Author)

  5. Radiation emitting devices regulations

    International Nuclear Information System (INIS)

    1970-01-01

    The Radiation Emitting Devices Regulations are the regulations referred to in the Radiation Emitting Devices Act and relate to the operation of devices. They include standards of design and construction, standards of functioning, warning symbol specifications in addition to information relating to the seizure and detention of machines failing to comply with the regulations. The radiation emitting devices consist of the following: television receivers, extra-oral dental x-ray equipment, microwave ovens, baggage inspection x-ray devices, demonstration--type gas discharge devices, photofluorographic x-ray equipment, laser scanners, demonstration lasers, low energy electron microscopes, high intensity mercury vapour discharge lamps, sunlamps, diagnostic x-ray equipment, ultrasound therapy devices, x-ray diffraction equipment, cabinet x-ray equipment and therapeutic x-ray equipment

  6. a Modeling Method of Fluttering Leaves Based on Point Cloud

    Science.gov (United States)

    Tang, J.; Wang, Y.; Zhao, Y.; Hao, W.; Ning, X.; Lv, K.; Shi, Z.; Zhao, M.

    2017-09-01

    Leaves falling gently or fluttering are common phenomenon in nature scenes. The authenticity of leaves falling plays an important part in the dynamic modeling of natural scenes. The leaves falling model has a widely applications in the field of animation and virtual reality. We propose a novel modeling method of fluttering leaves based on point cloud in this paper. According to the shape, the weight of leaves and the wind speed, three basic trajectories of leaves falling are defined, which are the rotation falling, the roll falling and the screw roll falling. At the same time, a parallel algorithm based on OpenMP is implemented to satisfy the needs of real-time in practical applications. Experimental results demonstrate that the proposed method is amenable to the incorporation of a variety of desirable effects.

  7. A MODELING METHOD OF FLUTTERING LEAVES BASED ON POINT CLOUD

    Directory of Open Access Journals (Sweden)

    J. Tang

    2017-09-01

    Full Text Available Leaves falling gently or fluttering are common phenomenon in nature scenes. The authenticity of leaves falling plays an important part in the dynamic modeling of natural scenes. The leaves falling model has a widely applications in the field of animation and virtual reality. We propose a novel modeling method of fluttering leaves based on point cloud in this paper. According to the shape, the weight of leaves and the wind speed, three basic trajectories of leaves falling are defined, which are the rotation falling, the roll falling and the screw roll falling. At the same time, a parallel algorithm based on OpenMP is implemented to satisfy the needs of real-time in practical applications. Experimental results demonstrate that the proposed method is amenable to the incorporation of a variety of desirable effects.

  8. Is part-time sick leave helping the unemployed?

    OpenAIRE

    Andrén, Daniela

    2011-01-01

    Using a discrete choice one-factor model, we estimate mean treatment parameters and distributional treatment parameters to analyze the effects of degree of sick leave on the probability of full recovery of lost work capacity for employed and unemployed individuals, respectively. Our results indicate that one year after the sick leave spell started, the average potential impact of part-time sick listing on an individual randomly chosen from the population on sick leave was positive for both gr...

  9. Chemical composition on cacao leaves infected by viruses

    International Nuclear Information System (INIS)

    Mustafa, M.; Delilah, M.; Syafrul, L.; Suryadi.

    1980-01-01

    Chemical analysis on cacao leaves that have chlorosis spots caused by cocoa swollen shoot viruses were carried out. It can be shown that leaves with chlorosis spots contain less chlorophyl and lipides than those without, but both do not show any significant difference in the concentration of water, glucose, saccharides, amino acid and proteins. It can be concluded that transport systems in the infected leaves are good so that the water and saccharides distribution in them are not disturbed. (author tr.)

  10. Abscisic acid protects bean leaves from ozone-induced phytotoxicity

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, R.A.; Adedipe, N.O.; Ormrod, D.P.

    1972-01-01

    Abscisic acid treatment of primary bean leaves caused a partial closure of stomates and thus considerably reduced the phytotoxicity of ozone. The symptoms of ozone-induced phytotoxicity in the water-treated leaves are a marked decrease in chlorophyll and slight decreases in the levels of protein and RNA. The evidence indicates that ozone injury to leaves is not metabolically related to normal leaf senescence.

  11. The Duration of Paid Parental Leave and Children's Scholastic Performance

    OpenAIRE

    Liu, Qian; Nordström Skans, Oskar

    2009-01-01

    We study how the duration of paid parental leave affects the accumulation of cognitive skills among children. We use a reform which extended parental leave benefits from 12 to 15 months for Swedish children born after August 1988 to evaluate the effects of prolonged parental leave on children's test scores and grades at age 16. We show that, on average, the reform had no effect on children's scholastic performance. However, we do find positive effects for children of well-educated mothers, a ...

  12. Part-Time Sick Leave as a Treatment Method?

    OpenAIRE

    Andrén D; Andrén T

    2009-01-01

    This paper analyzes the effects of being on part-time sick leave compared to full-time sick leave on the probability of recovering (i.e., returning to work with full recovery of lost work capacity). Using a discrete choice one-factor model, we estimate mean treatment parameters and distributional treatment parameters from a common set of structural parameters. Our results show that part-time sick leave increases the likelihood of recovering and dominates full-time sick leave for sickness spel...

  13. Parental Leave Policies and Pediatric Trainees in the United States.

    Science.gov (United States)

    Dixit, Avika; Feldman-Winter, Lori; Szucs, Kinga A

    2015-08-01

    The American Academy of Pediatrics (AAP) states that each residency program should have a clearly delineated, written policy for parental leave. Parental leave has important implications for trainees' ability to achieve their breastfeeding goals. This study aimed to measure the knowledge and awareness among members of the AAP Section on Medical Students, Residents, and Fellowship Trainees (SOMSRFT) regarding parental leave. An online survey was emailed to SOMSRFT members in June 2013. Quantitative data are presented as percentage of respondents. Awareness of leave policies was analyzed based on having children and the sex of respondents. Nine hundred twenty-seven members responded to the survey. Among those with children, 40% needed to extend the duration of their training in order to have longer maternity leave, 44% of whom did so in order to breastfeed longer. Thirty percent of respondents did not know if their program had a written, accessible policy for parental leave. Trainees without children and men were more unaware of specific aspects of parental leave such as eligibility for the Family Medical Leave Act as compared to women and those with children. Despite the fact that United States national policies support parental leave during pediatrics training, and a majority of programs comply, trainees' awareness regarding these policies needs improvement. © The Author(s) 2015.

  14. Responce of leaves of three plant species to aluminium stress

    Directory of Open Access Journals (Sweden)

    Agata Konarska

    2012-12-01

    Full Text Available Water culture experiments were undertaken for 14 days to examine the effect of increasing aluminum level (0, 10, 20 40 mg·dm-3 AlCl3·6 H2O on growth of sunflower, red pepper and radish leaves. The early stage of Al toxicity was characterized by curling or rolling of young leaves, marginal and veinal chlorosis, dark green leaves as soon as purpling of margins and veins of leaves. Reduction of leaf size and increased stomata density were observed with increasing Al concentration. Additionally, length of stomata cells decreased after Al-treatment.

  15. Family medical leave as a resilience resource for family caregivers.

    Science.gov (United States)

    Swanke, Jayme; Zeman, Laura Dreuth

    2009-01-01

    Case managers mobilize family networks to care for patients. Family medical leave can be a resource for case managers who seek to enhance resilience among family caregivers. The Family Medical Leave Act, passed in 1993, was the first U.S. policy to regulate employee leaves from work for family care purposes (29 CFR 825.102). This policy offers family caregivers increased flexibility and equality. Current and emerging policies also can reduce financial strain. The discussion examines how case managers can integrate family medical leave into best-practice models to support patients and family caregivers.

  16. Smart portable rehabilitation devices

    Directory of Open Access Journals (Sweden)

    Leahey Matt

    2005-07-01

    Full Text Available Abstract Background The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s. Methods In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Results Laboratory tests of the devices

  17. Smart portable rehabilitation devices.

    Science.gov (United States)

    Mavroidis, Constantinos; Nikitczuk, Jason; Weinberg, Brian; Danaher, Gil; Jensen, Katherine; Pelletier, Philip; Prugnarola, Jennifer; Stuart, Ryan; Arango, Roberto; Leahey, Matt; Pavone, Robert; Provo, Andrew; Yasevac, Dan

    2005-07-12

    The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s). In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Laboratory tests of the devices demonstrated that they were able to meet their design

  18. Reactor wall in thermonuclear device

    International Nuclear Information System (INIS)

    Shibui, Masanao.

    1988-01-01

    Purpose: To always monitor the life of armours in reactor walls and automatically shutdown the reactor if it should be operated in excess of the limit of use. Constitution: Monitoring material of lower melting point than armours (for example beryllium pellets) as one of the reactor wall constituents of a thermonuclear device are embedded in a region leaving the thickness corresponding to the allowable abrasion of the armour. In this structure, if the armours are abrased due to particle loads of a plasma and the abrasion exceeds a predetermined allowable level, the monitoring material is exposed to the plasma and melted and evaporated. Since this can be detected by impurity monitors disposed in the reactor, it is possible to recognize the limit for the working life of the armours. If the thermonuclear reactor should be operated accidentally exceeding the life of the armours, since a great amount of the monitoring materials have been evaporated, they flow into the plasma to increase the plasma radiation loss thereby automatically eliminate the plasma. (K.M.)

  19. Fluid circulation control device

    International Nuclear Information System (INIS)

    Benard, Henri; Henocque, Jean.

    1982-01-01

    Horizontal fluid circulation control device, of the type having a pivoting flap. This device is intended for being fitted in the pipes of hydraulic installation, particularly in a bleed and venting system of a nuclear power station shifting radioactive or contaminated liquids. The characteristic of this device is the cut-out at the top of the flap to allow the air contained in the pipes to flow freely [fr

  20. Mobile Device Encryption Systems

    OpenAIRE

    Teufl , Peter; Zefferer , Thomas; Stromberger , Christof

    2013-01-01

    Part 4: Software Security; International audience; The initially consumer oriented iOS and Android platforms, and the newly available Windows Phone 8 platform start to play an important role within business related areas. Within the business context, the devices are typically deployed via mobile device management (MDM) solutions, or within the bring-your-own-device (BYOD) context. In both scenarios, the security depends on many platform security functions, such as permission systems, manageme...

  1. Sick Leave and Factors Influencing Sick Leave in Adult Patients with Atopic Dermatitis: A Cross-Sectional Study

    Directory of Open Access Journals (Sweden)

    Harmieke van Os-Medendorp

    2015-03-01

    Full Text Available Background: Little is known about the prevalence of sick leave due to atopic dermatitis (AD. The current literature on factors influencing sick leave is mostly derived from other chronic inflammatory diseases. This study aimed to determine the prevalence of sick leave due to AD and to identify influencing factors. Methods: A cross-sectional study was carried out in adult patients with AD. Outcome measures: sick leave during the two-week and one-year periods, socio-demographic characteristics, disease severity, quality of life and socio-occupational factors. Logistic regression analyses were used to determine influencing factors on sick leave over the two-week period. Results: In total, 253 patients were included; 12% of the patients had to take sick leave in the last two weeks due to AD and 42% in the past year. A higher level of symptom interference (OR 1.26; 95% CI 1.13–1.40 or perfectionism/diligence (OR 0.90; 95% CI 0.83–0.96 may respectively increase or decrease the number of sick leave days. Conclusion: Sick leave in patients with AD is a common problem and symptom interference and perfectionism/diligence appeared to influence it. Novel approaches are needed to deal with symptoms at work or school to reduce the amount of sick leave due to AD.

  2. Sick Leave and Factors Influencing Sick Leave in Adult Patients with Atopic Dermatitis: A Cross-Sectional Study.

    Science.gov (United States)

    van Os-Medendorp, Harmieke; Appelman-Noordermeer, Simone; Bruijnzeel-Koomen, Carla; de Bruin-Weller, Marjolein

    2015-03-27

    Little is known about the prevalence of sick leave due to atopic dermatitis (AD). The current literature on factors influencing sick leave is mostly derived from other chronic inflammatory diseases. This study aimed to determine the prevalence of sick leave due to AD and to identify influencing factors. A cross-sectional study was carried out in adult patients with AD. sick leave during the two-week and one-year periods, socio-demographic characteristics, disease severity, quality of life and socio-occupational factors. Logistic regression analyses were used to determine influencing factors on sick leave over the two-week period. In total, 253 patients were included; 12% of the patients had to take sick leave in the last two weeks due to AD and 42% in the past year. A higher level of symptom interference (OR 1.26; 95% CI 1.13-1.40) or perfectionism/diligence (OR 0.90; 95% CI 0.83-0.96) may respectively increase or decrease the number of sick leave days. Sick leave in patients with AD is a common problem and symptom interference and perfectionism/diligence appeared to influence it. Novel approaches are needed to deal with symptoms at work or school to reduce the amount of sick leave due to AD.

  3. THE EFFECT OF HARVESTING TIME AND DEGREE OF LEAVES MATURATION ON VITEKSIKARPIN LEVEL IN LEGUNDI LEAVES (Vitex trifolia L.

    Directory of Open Access Journals (Sweden)

    Yosi Bayu Murti

    2015-11-01

    Full Text Available Legundi (Vitex trifolia L. is one of Indonesia’s traditional crops that have not been studied and developed into fitofarmaka. Legundi leaves can be used for therapy in asthmatics with optimum level. Therefore it is necessary for optimization of harvesting Legundi leaves which includes time and degree of maturation of the leaves. Harvesting time optimization by means of harvesting the leaves at the different times i.e. morning, noon, and evening, while the leaf maturation level optimization by way of harvesting leaves numbered one through five of the youngest end, then the time of harvesting and leaves that provide optimum levels of viteksikarpin were assigned. Measurements of viteksikarpin assigned using TLCdensitometry then analyzed using Wincats software and Microsoft Office Excel 2007. The highest viteksikarpin levels in Legundi leaves harvested in the afternoon, then during the day, and the lowest in the morning. The highest viteksikarpin levels of Legundi leaves were on second leaf, first leaf, third leaf, fourth leaf, and the lowest on fifth leaf. Optimum levels of viteksikarpin in Legundi leaves was harvested in the afternoon by picking the first until the third leaf.

  4. Positive and negative consequences of sick leave for the individual, with special focus on part-time sick leave.

    Science.gov (United States)

    Sieurin, Leif; Josephson, Malin; Vingård, Eva

    2009-01-01

    To describe the consequences of long-term sick leave (>28 days) on working situation, health and lifestyle among employees from the public sector in Sweden. Employees in four county councils and two municipalities on long term sick leave on 1 November 2005 (n = 1,128) answered a questionnaire in February 2006. The response rate was 71.7%. Eighty seven per cent were still on sick leave when the questionnaire was answered: 54% part time and 33% full time. Reporting positive consequences was rare but reporting negative consequences, such as effects on the development of salary, the possibilities of pursuing a career or to change to another job were common. Sick leave seemed to lead to a considerable loss of zest for work, even if the respondents were back in work full time. Regardless of the negative consequences at work, 92% of those on part-time sick leave believed that the part-time sick leave was good for them even if many thought it had negative consequences for employer and colleagues. Long-term sick leave has negative consequences for the individual in work situations, even for those back at work full time. The development of salary and career seem to be most affected. The attitude towards part-time sick leave was positive and this result indicates that there is a potential for an increased degree of partial return to work in the group of people on long-term sick leave.

  5. Parental leave for residents and pediatric training programs.

    Science.gov (United States)

    2013-02-01

    The American Academy of Pediatrics (AAP) is committed to the development of rational, equitable, and effective parental leave policies that are sensitive to the needs of pediatric residents, families, and developing infants and that enable parents to spend adequate and good-quality time with their young children. It is important for each residency program to have a policy for parental leave that is written, that is accessible to residents, and that clearly delineates program practices regarding parental leave. At a minimum, a parental leave policy for residents and fellows should conform legally with the Family Medical Leave Act as well as with respective state laws and should meet institutional requirements of the Accreditation Council for Graduate Medical Education for accredited programs. Policies should be well formulated and communicated in a culturally sensitive manner. The AAP advocates for extension of benefits consistent with the Family Medical Leave Act to all residents and interns beginning at the time that pediatric residency training begins. The AAP recommends that regardless of gender, residents who become parents should be guaranteed 6 to 8 weeks, at a minimum, of parental leave with pay after the infant's birth. In addition, in conformance with federal law, the resident should be allowed to extend the leave time when necessary by using paid vacation time or leave without pay. Coparenting, adopting, or fostering of a child should entitle the resident, regardless of gender, to the same amount of paid leave (6-8 weeks) as a person who takes maternity/paternity leave. Flexibility, creativity, and advanced planning are necessary to arrange schedules that optimize resident education and experience, cultivate equity in sharing workloads, and protect pregnant residents from overly strenuous work experiences at critical times of their pregnancies.

  6. Uranium: do leave it in the ground!

    International Nuclear Information System (INIS)

    Bunyard, P.

    1990-01-01

    A previous author has argued that it would be best in the long run to consume uranium as much as possible in reactors rather than leave it in the ground in order to save the earth and generations into the far distant future from the evils of radiation. The argument is based on a comparison between the radioactive decay processes of fissioned uranium and uranium left in the earth to decay in its own time. It can be shown that from 300 days after reactor shut down onwards, the spent fuel will generate barely 1% of the radioactive energy that it would were it left untouched in the ground. Counter arguments are presented based largely on the risks to human health and life presented by uranium mining and disasters at nuclear plants such as that at Chernobyl. Illustrations are given of the suffering of people living near uranium mines arising from soil contamination by uranium tailings; the widespread radioactive contamination of the surrounding area and increased cancer mortality rates due to the Chernobyl accident are described. Finally, it is pointed out that uranium serves as a radioactive heat source in the gigantic recycling of rocks and the regeneration of the planet. All these arguments lead to the conclusion that uranium is best left in the earth. (UK)

  7. Anticorrosion Coating using Olea sp. Leaves Extract

    Science.gov (United States)

    Ikhmal, W. M. K. W. M.; Yasmin, M. Y. N.; Fazira, M. F. M.; Rafizah, W. A. W.; Nik, W. B. Wan; Sabri, M. G. M.

    2018-04-01

    Olive leaves extract (OLE) was evaluated as green corrosion inhibitor for stainless steel grade 316L (SS316L) in several media using scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. The Fourier Transform Infrared (FTIR) spectroscopy results reveals several active compound indicated by O-H stretch, C=O stretch, C-OH stretch and C-N stretch which can be attributed to oleuropein and hydroxtyrosol acting as the main inhibiting sources for corrosion. The results obtained also show the inhibition efficiency of OLE increase with the increase of OLE concentration. Through its inhibitive action elucidate from the electrochemical analysis, the extract was found to act as a mixed type inhibitor. Micrographs by SEM showed that the surface of steel which has been coated with 0% and 20% of OLE coating extract possess a lot of pin holes or pores while the steel with 10% of OLE coating extract shows the surface has multiple cracks. This study clearly shows the efficiency of OLE as anticorrosion coating for control of stainless steel in marine application.

  8. The anticancer effect of Ocimum tenuiflorum leaves

    Directory of Open Access Journals (Sweden)

    Lam, S.N.

    2017-11-01

    Full Text Available Breast cancer is the leading cause of cancer deaths among females in Malaysia. Ocimum tenuiflorum L., (O. tenuiflorum commonly known as ruku in Malaysia, is usually cultivated as a garden ornamental plant because of its small purplish and some yellowish flower. The specific objective of this research is to investigate the anticancer of O. tenuiflorum against human breast cancer cell lines (MCF-7 and MDA-MB-231 and human fibroblast cell line (HS-27. In addition, another objective is to determine the mineral and heavy metal determination of O. tenuiflorum. O. tenuiflorum exhibited anticancer activity against MCF-7 (a hormone-dependent breast cancer cell line. The viability of MCF-7 cells decreased significantly after treatment with various concentrations of methanolic plant extracts (25 and 100 μg/mL, as shown via 3-(4,5-dimethylthiazol-2-yl2,5-diphenyltetrazolium bromide (MTT assay. The crude extracts show the lower IC50 (less than 100 μg/mL value against the cancer cell lines and show no effect on HS-27. The high content of calcium in the leaves of O. tenuiflorum may play a role in decreasing the risk of certain cancer. The concentrations of heavy metals (Pb and As detected in O. tenuiflorum are safe for consumption.

  9. The energetic characterization of pineapple crown leaves.

    Science.gov (United States)

    Braga, R M; Queiroga, T S; Calixto, G Q; Almeida, H N; Melo, D M A; Melo, M A F; Freitas, J C O; Curbelo, F D S

    2015-12-01

    Energetic characterization of biomass allows for assessing its energy potential for application in different conversion processes into energy. The objective of this study is to physicochemically characterize pineapple crown leaves (PC) for their application in energy conversion processes. PC was characterized according to ASTM E871-82, E1755-01, and E873-82 for determination of moisture, ash, and volatile matter, respectively; the fixed carbon was calculated by difference. Higher heating value was determined by ASTM E711-87 and ash chemical composition was determined by XRF. The thermogravimetric and FTIR analyses were performed to evaluate the thermal decomposition and identify the main functional groups of biomass. PC has potential for application in thermochemical processes, showing high volatile matter (89.5%), bulk density (420.8 kg/m(3)), and higher heating value (18.9 MJ/kg). The results show its energy potential justifying application of this agricultural waste into energy conversion processes, implementing sustainability in the production, and reducing the environmental liabilities caused by its disposal.

  10. Temperature indicating device

    International Nuclear Information System (INIS)

    Angus, J.P.; Salt, D.

    1988-01-01

    A temperature indicating device comprises a plurality of planar elements some undergoing a reversible change in appearance at a given temperature the remainder undergoing an irreversible change in appearance at a given temperature. The device is useful in indicating the temperature which an object has achieved as well as its actual temperature. The reversible change is produced by liquid crystal devices. The irreversible change is produced by an absorbent surface carrying substances e.g. waxes which melt at predetermined temperatures and are absorbed by the surface; alternatively paints may be used. The device is used for monitoring processes of encapsulation of radio active waste. (author)

  11. Ion trap device

    Science.gov (United States)

    Ibrahim, Yehia M.; Smith, Richard D.

    2016-01-26

    An ion trap device is disclosed. The device includes a series of electrodes that define an ion flow path. A radio frequency (RF) field is applied to the series of electrodes such that each electrode is phase shifted approximately 180 degrees from an adjacent electrode. A DC voltage is superimposed with the RF field to create a DC gradient to drive ions in the direction of the gradient. A second RF field or DC voltage is applied to selectively trap and release the ions from the device. Further, the device may be gridless and utilized at high pressure.

  12. Recoil transporter devices

    International Nuclear Information System (INIS)

    Madhavan, N.

    2005-01-01

    The study of sparsely produced nuclear reaction products in the direction of intense primary beam is a challenging task, the pursuit of which has given rise to the advent or several types of selective devices. These range from a simple parallel plate electrostatic deflector to state-of-the-art electromagnetic separators. There is no single device which can satisfy all the requirements of an ideal recoil transporter, simultaneously. An overview of such devices and their building blocks is presented, which may help in the proper choice of the device as per the experimental requirements. (author)

  13. Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — This searchable database contains establishments (engaged in the manufacture, preparation, propagation, compounding, assembly, or processing of medical devices...

  14. Virtual Training Devices Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Virtual Training Devices (VTD) Laboratory at the Life Cycle Software Engineering Center, Picatinny Arsenal, provides a software testing and support environment...

  15. High heat flux device of thermonuclear device

    International Nuclear Information System (INIS)

    Tachikawa, Nobuo.

    1994-01-01

    The present invention provides an equipments for high heat flux device (divertor) of a thermonuclear device, which absorbs thermal deformation during operation, has a high installation accuracy, and sufficiently withstands for thermal stresses. Namely, a heat sink member is joined to a structural base. Armour tiles are joined on the heat sink member. Cooling pipes are disposed between the heat sink member and the armour tiles. With such a constitution, the heat sink member using a highly heat conductive material having ductility, such as oxygen free copper, the cooling pipes using a material having excellent high temperature resistance and excellent elongation, such as aluminum-dispersed reinforced copper, and the armour tiles are completely joined on the structural base. Therefore, when thermal deformation tends to cause in the high heat flux device such as a divertor, cooling pipes cause no plastic deformation because of their high temperature resistance, but the heat sink member such as a oxygen free copper causes plastic deformation to absorb thermal deformation. As a result, the high heat flux device such as a divertor causes no deformation. (I.S.)

  16. Repairing method and device for thermonuclear device

    International Nuclear Information System (INIS)

    Sakurai, Akiko; Masumoto, Hiroshi; Tachikawa, Nobuo.

    1995-01-01

    The present invention provides a method of and a device for repairing a first wall and a divertor disposed in a vacuum vessel of a thermonuclear device. Namely, an armour tile of the divertor secured, by a brazing material, in a vacuum vessel of the thermonuclear device in which high temperature plasmas of deuterium and tritium are confined to cause fusion reaction is induction-heated or heated by microwaves to melt the brazing material. Only the armour tile is thus exchanged by its attachment/detachment. This device comprises, in the vacuum vessel, an armour tile attaching/detaching manipulator and a repairing manipulator comprising a heating manipulator having induction heating coils at the top end thereof. Induction heating coils are connected to an AC power source. According to the present invention, the armour tile is exchanged without taking the divertor out of the vacuum vessel. Therefore, cutting of a divertor cooling tube for taking the divertor out of the vacuum vessel and re-welding of the divertor for attaching it to the vacuum vessel again are no more necessary. (I.S.)

  17. [Fat soluble constituents of the leaves of Vaccinium bracteatum Thunb].

    Science.gov (United States)

    Tu, P; Liu, J; Li, J

    1997-07-01

    Four compounds were isolated from the fat soluble fraction of the leaves of Vaccinium bracteatum and identified as friedelin (I), epifriedelinol (II), beta-sitosterol(III) and ursolic acid(IV) by IR, NMR and MS. Compound III and IV are isolated from the leaves of this plant for the first time.

  18. 25 CFR 38.12 - Leave system for education personnel.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Leave system for education personnel. 38.12 Section 38.12 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION EDUCATION PERSONNEL § 38.12 Leave system for education personnel. (a) Full-time school-term employees. Employees on a full-time school-term...

  19. Sick leave analysis among self-employed Dutch farmers

    NARCIS (Netherlands)

    Hartman, E.; Oude Vrielink, H.H.E.; Huirne, R.B.M.; Metz, J.H.M.

    2003-01-01

    Background Agriculture is one of the most physically demanding and risky industries. Aim The objective of this study was to provide baseline data on the diagnoses, occurrence and duration of sick leave of self-employed Dutch farmers. Method A database of 22807 sick leave claims of 12627 farmers

  20. Metabolic changes associated with ozone injury of bean leaves

    Energy Technology Data Exchange (ETDEWEB)

    Craker, L.E.; Starbuck, J.S.

    1972-07-01

    Metabolic processes in primary leaves of bean plants (Phaseolus vulgaris) were altered by ozone stress. Decreases in levels of ribonucleic acid (RNA) and protein, and increases in ribonuclease (RNase) and free amine groups were associated with visible oxidant injury to the leaves. It appears that some air pollution injury to plants may result from changes in metabolic processes. 23 references, 5 figures, 2 tables.

  1. Hypoglycaemic activity of the leaves extracts of Bersama engleriana ...

    African Journals Online (AJOL)

    Hypoglycaemic activity of the leaves extracts of Bersama engleriana in rats. Georgette Nyah Njike, Pierre Watcho, Télesphore Benoît Nguelefack, Albert Kamanyi. Abstract. The hypoglycaemic properties of the aqueous and methanol extracts of the leaves of Bersama engleriana were evaluated in normoglycaemic rats in ...

  2. Effects of different levels of supplementation with cassava leaves ...

    African Journals Online (AJOL)

    Effects of different levels of supplementation with cassava leaves ( Manihot esculenta ) on growth, parasite load and some characteristics of blood in the dwarf goat ... Also, supplementations with fresh cassava leaves do not affect red blood cells, white blood cells, haematocrite and sedimentation speed of the blood of Dwarf ...

  3. The impact of paternity leave on fathers' future earnings.

    Science.gov (United States)

    Rege, Mari; Solli, Ingeborg F

    2013-12-01

    Using Norwegian registry data, we investigate the effect of paternity leave on fathers' long-term earnings. If the paternity leave increased long-term father involvement, then we should expect a reduction in fathers' long-term earnings as they shift time and effort from market to home production. For identification, we use the Norwegian introduction of a paternity-leave quota in 1993, reserving four weeks of the total of 42 weeks of paid parental leave exclusively for the father. The introduction of the paternity-leave quota led to a sharp increase in rates of leave-taking for fathers. We estimate a difference-in-differences model that exploits differences in fathers' exposure to the paternity-leave quota by the child's age and year of observation. Our analysis suggests that four weeks of paternity leave during the child's first year decreases fathers' future earnings, an effect that persists through our last point of observation, when the child is 5 years old. A battery of robustness tests supports our results.

  4. Fathers' use of parental leave. What do we know?

    NARCIS (Netherlands)

    Zhelyazkova, N.

    2013-01-01

    This paper reviews the the literature on fathers' use of parental leave. Parental leave is a work-life reconciliation instrument with great potential to bring about a more equal distribution of paid and unpaid work between men and women. However, policy evaluation studies reveal that simply making

  5. 20 CFR 416.215 - You leave the United States.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false You leave the United States. 416.215 Section... Eligible § 416.215 You leave the United States. You lose your eligibility for SSI benefits for any month during all of which you are outside of the United States. If you are outside of the United States for 30...

  6. Identification of phytochemical compounds in Calophyllum inophyllum leaves

    Directory of Open Access Journals (Sweden)

    David Febrilliant Susanto

    2017-09-01

    Conclusions: C. inophyllum leaves may be used as a good source of fiber. It was found that C. inophyllum leaves have the potential as herbal drugs due to their phytochemical content. The separation, isolation, and purification of bioactive compounds from this methanolic crude extract and their biological activity are under further investigation.

  7. Identifying employees at risk for job loss during sick leave

    NARCIS (Netherlands)

    Flach, Peter A.; Groothoff, Johan W.; Bultmann, Ute

    2013-01-01

    Purpose: To examine the associations between medical, work-related, organizational and sociodemographic factors and job loss during sick leave in a Dutch population of 4132 employees on sick leave. Methods: Data were assessed by occupational health physicians (OHPs) on sociodemographic, medical,

  8. Phytotoxic activity of the methanol leaves extract of Paullinia pinnata ...

    African Journals Online (AJOL)

    The activity of the extract against the growth of Lemna minor was used to investigate the phytotoxic activity. The activity of the methanol extract of P. pinnata leaves against Lemna minor increased in a dose- dependent manner and was significant at 1000 μg/ml. Therefore, the methanol leaves extract of P. pinnata exhibited ...

  9. Sensory evaluation of different preparations of cassava leaves from ...

    African Journals Online (AJOL)

    Cassava leaves are largely consumed in Africa and are among the top three African indigenous vegetables rich in nutrients. Leaves from bitter (Manihot utilissima), sweet (Manihot dulcis) and wild (Manihot glaziovii) species of cassava were cooked by boiling in salted (sodium bicarbonate and table salt) water with the ...

  10. Evaluation of nutrient contents of Gmelina arborea leaves as animal ...

    African Journals Online (AJOL)

    An evaluation of chemical and mineral composition different forms of Gmelina arborea (GA) leaves was investigated. Experiment 1 involve the determination of the chemical composition, mineral and anti-nutrient of green, yellow and brown leaves of GA. In experiment 2, a free choice intake study was carried out using fifteen ...

  11. Organizational Justice and Social Workers' Intentions to Leave Agency Positions

    Science.gov (United States)

    Kim, Tae Kuen; Solomon, Phyllis; Jang, Cinjae

    2012-01-01

    The authors investigated the impact of organizational justice on social workers' intention to leave Korean social service agencies. Specifically, this study concentrated on the moderating effect of organizational justice on the relationship between burnout and intention to leave. The authors surveyed 218 front-line social workers from 51 social…

  12. Determination of Heavy Metals in Leaves of Mangifera Indica ...

    African Journals Online (AJOL)

    USER PC

    ABSTRACT. Concentrations of cadmium, chromium and zinc in leaves of Mangifera indica (Mango), Psidium ... alarm, in some cases, trace heavy metals may accumulate to an ... leaves when released can lead to serious ... shown that it can interact with different hormonal .... 17, 2012. Cadmium Exposure and Bone Mineral.

  13. Leaves as composites of latent developmental and evolutionary shapes

    Science.gov (United States)

    Across plants, leaves exhibit profound diversity in shape. As a single leaf expands, its shape is in constant flux. Additionally, plants may also produce leaves with different shapes at successive nodes. Because leaf shape can vary in many different ways, theoretically the effects of distinct proces...

  14. Nutritional and chemical value of Amaranthus hybridus L. leaves ...

    African Journals Online (AJOL)

    The nutritional and chemical value of Amaranthus hybridus were investigated using standard analytical methods in order to assess the numerous potential of the plant leaves. The Proximate analysis showed the percentage moisture content, ash content, crude protein, crude lipid, crude fibre and carbohydrate of the leaves ...

  15. Genotoxicity of Nicotiana tabacum leaves on Helix aspersa.

    Science.gov (United States)

    da Silva, Fernanda R; Erdtmann, Bernardo; Dalpiaz, Tiago; Nunes, Emilene; Ferraz, Alexandre; Martins, Tales L C; Dias, Johny F; da Rosa, Darlan P; Porawskie, Marilene; Bona, Silvia; da Silva, Juliana

    2013-07-01

    Tobacco farmers are routinely exposed to complex mixtures of inorganic and organic chemicals present in tobacco leaves. In this study, we examined the genotoxicity of tobacco leaves in the snail Helix aspersa as a measure of the risk to human health. DNA damage was evaluated using the micronucleus test and the Comet assay and the concentration of cytochrome P450 enzymes was estimated. Two groups of snails were studied: one fed on tobacco leaves and one fed on lettuce (Lactuca sativa L) leaves (control group). All of the snails received leaves (tobacco and lettuce leaves were the only food provided) and water ad libitum. Hemolymph cells were collected after 0, 24, 48 and 72 h. The Comet assay and micronucleus test showed that exposure to tobacco leaves for different periods of time caused significant DNA damage. Inhibition of cytochrome P450 enzymes occurred only in the tobacco group. Chemical analysis indicated the presence of the alkaloid nicotine, coumarins, saponins, flavonoids and various metals. These results show that tobacco leaves are genotoxic in H. aspersa and inhibit cytochrome P450 activity, probably through the action of the complex chemical mixture present in the plant.

  16. Genotoxicity of Nicotiana tabacum leaves on Helix aspersa

    Directory of Open Access Journals (Sweden)

    Fernanda R. da Silva

    2013-01-01

    Full Text Available Tobacco farmers are routinely exposed to complex mixtures of inorganic and organic chemicals present in tobacco leaves. In this study, we examined the genotoxicity of tobacco leaves in the snail Helix aspersa as a measure of the risk to human health. DNA damage was evaluated using the micronucleus test and the Comet assay and the concentration of cytochrome P450 enzymes was estimated. Two groups of snails were studied: one fed on tobacco leaves and one fed on lettuce (Lactuca sativa L leaves (control group. All of the snails received leaves (tobacco and lettuce leaves were the only food provided and water ad libitum. Hemolymph cells were collected after 0, 24, 48 and 72 h. The Comet assay and micronucleus test showed that exposure to tobacco leaves for different periods of time caused significant DNA damage. Inhibition of cytochrome P450 enzymes occurred only in the tobacco group. Chemical analysis indicated the presence of the alkaloid nicotine, coumarins, saponins, flavonoids and various metals. These results show that tobacco leaves are genotoxic in H. aspersa and inhibit cytochrome P450 activity, probably through the action of the complex chemical mixture present in the plant.

  17. Perceptions of the use of indigenous leaves as packaging materials ...

    African Journals Online (AJOL)

    Although alternative food packaging materials are available, Ghanaians still use leaves to package some ready-to-eat cornmeal products. This study examines the perceptions of a representative community sample of 70 producers, 40 sellers and 120 consumers of ready-to-eat leaves-packaged cornmeal products in ...

  18. Pharmacognostic Investigation of the Leaves and Stems of ...

    African Journals Online (AJOL)

    Purpose: Some pharmacognostical investigations were carried out on the leaves and stems of Viburnum erubescens Wall.ex DC to record parameters for identifying and differentiating various species of Viburnum. Methods: The research specimens were authenticated and preserved both in fresh and dry forms. The leaves ...

  19. The relationship between restraints of trade and garden leave ...

    African Journals Online (AJOL)

    The relationship between restraints of trade and garden leave. ... Potchefstroom Electronic Law Journal/Potchefstroomse Elektroniese Regsblad ... The purpose of the article is to examine the relationship between a so-called "garden leave" clause and a post-termination restraint of trade clause in employment contracts, ...

  20. Summer survival of Phytophthora ramorum in California bay laurel leaves

    Science.gov (United States)

    Elizabeth J. Fichtner; David M. Rizzo; Shannon C. Lynch; Jennifer Davidson; Gerri Buckles; Jennifer Parker

    2008-01-01

    Sudden oak death manifests as non-lethal foliar lesions on bay laurel (Umbellularia californica), which support sporulation and survival of Phytophthora ramorum in forest ecosystems. Infected bay laurel leaves are more likely to abscise than uninfected leaves, resulting in an accumulation of inoculum at the forest floor. The pathogen survives the dry...

  1. Challenging Sex Discrimination Through the Courts: Maternity Leave Policies.

    Science.gov (United States)

    Pottker, Janice

    This study attempted to determine the extent to which school districts had brought their maternity leave policies into compliance with the latest Supreme Court ruling. The study also analyzed the maternity leave requirements of the Equal Employment Opportunities Commission (EEOC), and sought to determine which variables were associated with…

  2. Wisconsin Maternity Leave and Fringe Benefits: Policies, Practices and Problems.

    Science.gov (United States)

    Gerner, Jennifer

    The study examines the economic implications in Wisconsin of the 1972 Equal Employment Opportunity Commission guideline which requires employers to treat maternity leave as a temporary disability. First, the static cost of the maternity leave guideline to employers is estimated for the State of Wisconsin. Second, some examination of the economic…

  3. Extraction and application of dyestuffs from the leaves of guinea ...

    African Journals Online (AJOL)

    This research work is aimed at assessing the dyeing and colouring potentials of ethanol extracts from the leaves of guinea corn and the skin of onion. It is intended to apply the purified dye extracts on textile, drink and food. The leaves of guinea corn (Sorghum bicolor) and the skin of onion (Allium cepa) were collected, ...

  4. Evaluation of the Danish Leave Schemes. Summary of a Report.

    Science.gov (United States)

    Andersen, Dines; Appeldorn, Alice; Weise, Hanne

    An evaluation examined how the Danish leave schemes, an offer to employed and unemployed persons who qualify for unemployment benefits, were functioning and to what extent the objectives have been achieved. It was found that 60 percent of those taking leave had previously been unemployed; women accounted for two-thirds of those joining the scheme;…

  5. Assessment of Annona reticulata Linn. leaves fractions for invitro ...

    African Journals Online (AJOL)

    Since from long time the plant, Annona reticulata Linn. is known for its beneficial effects. Leaves of A. reticulata were screened for phytochemicals and in vitro antioxidant, antibacterial and antifungal activity. The shade dried leaves were extracted with methanol and aqueous methanolic extract was partitioned successively ...

  6. Exploring a new security framework for remote patient monitoring devices

    OpenAIRE

    Ondiege, Brian; Clarke, Macolm; Mapp, Glenford E.

    2017-01-01

    Security has been an issue of contention in healthcare. The lack of familiarity and poor implementation of security in healthcare leave the patients’ data vulnerable to attackers. The main issue is assessing how we can provide security in an RPM infrastructure. The findings in literature show there is little empirical evidence on proper implementation of security. Therefore, there is an urgent need in addressing cybersecurity issues in medical devices. Through the review of relevant literatur...

  7. The accumulation and elimination of 89Sr in tea leaves

    International Nuclear Information System (INIS)

    Zhang Yongxi; Wang Shouxiang; Chen Chuanqun; Sun Zhiming; Hu Bingmin; Huang Dan

    1995-01-01

    The 89 Sr was added to the tea tree-soil system by different ways. The 89 Sr in the system through the over-ground part of tea tree, was much more than that through soil. The 89 Sr concentration in older leaves was higher than in shoot for a definite treatment. The accumulation elimination law of 89 Sr in leaves varied with the treatments. For the treatment through the over-ground part, the 89 Sr concentration in older leaves and shoot was monotonously decreased with time increasing. But for the treatment through soil the 89 Sr concentration in shoot was increased to reach a peak value, and then decreased slowly; while the 89 Sr concentration in older leaves increased quickly in a period, then increased slowly to attain a saturated value. In addition, the concentration factor of 89 Sr in older leaves and shoot were determined

  8. [Chemical components from essential oil of Pandanus amaryllifolius leaves].

    Science.gov (United States)

    Chen, Xiao-Kai; Ge, Fa-Huan

    2014-04-01

    To analyze the chemical compositions of Pandanus amaryllifolius leaves essential oil extracted by steam distillation. The essential oil of Pandanus amaryllifolius leaves was analyzed by gas chromatography-mass spectrum, and the relative content of each component was determined by area normalization method. 128 peaks were separated and 95 compounds were identified, which weighed 97.75%. The main chemical components of the essential oil were phytol (42.15%), squalene (16.81%), what's more pentadecanal (6.17%), pentadecanoic acid (4.49%), 3, 7, 11, 15-tetramethyl-2-hexadecen-1-ol (3.83%), phytone (2.05%) and the other 74 chemical compositions were firstly identified from the essential oil of Pandanus amaryllifolius leaves. The chemical compositions of Pandanu samaryllifolius leaves essential oil was systematically, deeply isolated and identified for the first time. This experiment has provided scientific foundation for further utilization of Pandanus amaryllifolius leaves.

  9. Partial Device Fingerprints

    NARCIS (Netherlands)

    Ciere, M.; Hernandez Ganan, C.; van Eeten, M.J.G.

    2017-01-01

    In computing, remote devices may be identified by means of device fingerprinting, which works by collecting a myriad of clientside attributes such as the device’s browser and operating system version, installed plugins, screen resolution, hardware artifacts, Wi-Fi settings, and anything else

  10. Unconventional Quantum Computing Devices

    OpenAIRE

    Lloyd, Seth

    2000-01-01

    This paper investigates a variety of unconventional quantum computation devices, including fermionic quantum computers and computers that exploit nonlinear quantum mechanics. It is shown that unconventional quantum computing devices can in principle compute some quantities more rapidly than `conventional' quantum computers.

  11. Magnetic sensor device

    NARCIS (Netherlands)

    2009-01-01

    The present invention provides a sensor device and a method for detg. the presence and/or amt. of target moieties in a sample fluid, the target moieties being labeled with magnetic or magnetizable objects. The sensor device comprises a magnetic field generating means adapted for applying a retention

  12. Process control device

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Kobayashi, Hiroshi.

    1994-01-01

    A process control device comprises a memory device for memorizing a plant operation target, a plant state or a state of equipments related with each other as control data, a read-only memory device for storing programs, a plant instrumentation control device or other process control devices, an input/output device for performing input/output with an operator, and a processing device which conducts processing in accordance with the program and sends a control demand or a display demand to the input/output device. The program reads out control data relative to a predetermined operation target, compares and verify them with actual values to read out control data to be a practice premise condition which is further to be a practice premise condition if necessary, thereby automatically controlling the plant or requiring or displaying input. Practice presuming conditions for the operation target can be examined succesively in accordance with the program without constituting complicated logical figures and AND/OR graphs. (N.H.)

  13. EPICS GPIB device support

    International Nuclear Information System (INIS)

    Winans, J.

    1993-01-01

    A GPIB device support module is used to provide access to the operating parameters of a GPIB device. GPIB devices may be accessed via National Instruments 1014 cards or via Bitbus Universal Gateways. GPIB devices typically have many parameters, each of which may be thought of in terms of the standard types of database records available in EPICS. It is the job of the device support module designer to decide how the mapping of these parameters will be made to the available record types. Once this mapping is complete, the device support module may be written. The writing of the device support module consists primarily of the construction of a parameter table. This table is used to associate the database record types with the operating parameters of the GPIB instrument. Other aspects of module design include the handling of SRQ events and errors. SRQ events are made available to the device support module if so desired. The processing of an SRQ event is completely up to the designer of the module. They may be ignored, tied to event based record processing, or anything else the designer wishes. Error conditions may be handled in a similar fashion

  14. Proteome analysis of muscadine grape leaves

    Directory of Open Access Journals (Sweden)

    Sheikh M Basha

    2009-04-01

    Full Text Available Sheikh M Basha1, Ramesh Katam1, Hemanth Vasanthaiah1, Frank Matta21Center for Viticulture and Small Fruit Research, Florida A and M University, Tallahassee, FL, USA; 2Plant and Soil Science Department, Mississippi State University, Mississippi State, MS, USAAbstract: Muscadine grapes are native to the southeastern United States and are used for making wine and consumed as fresh fruit. Grape berries, as ‘sink organs,’ rely on the use of available carbohydrate resources produced by photosynthesis to support their development and composition. A high throughput two-dimensional gel electrophoresis (2-DE was conducted on muscadine (Vitis rotundifolia grape leaf proteins to document complexity in their composition and to determine protein identity and function for enhancing photosynthetic efficiency of muscadine grape. 2-DE resolved muscadine leaf proteins into >258 polypeptides with pIs between 3.5 and 8.0 and molecular weight between 12,000 to 15,0000 Daltons. The consistently expressed proteins were excised and subjected to sequencing. Homology search of protein sequences showed 84% identity with Viridi plantae database. Identity of some of these proteins included RuBisCO, glutamine synthetase, pathogenesis-related protein, glyoxisomal malate dehydrogenase, ribonucleoprotein, chloroplast precursor, oxygen evolving enhancer protein. Comparative analysis of 10 muscadine cultivars showed quantitative differences in expression of 39 polypeptides among these genotypes. The results suggested that the polypeptide composition of muscadine grape leaf is complex, and polypeptide number and amount vary widely among muscadine genotypes, and these variations may be responsible for differences in their physiology, berry and stress tolerance characteristics.Keywords: grapevine, leaves, muscadine, proteins, sequencing, 2-DE

  15. Exploring the Link between Maternity Leave and Postpartum Depression.

    Science.gov (United States)

    Kornfeind, Katelin R; Sipsma, Heather L

    2018-05-02

    Postpartum depression affects a substantial proportion of new mothers in the United States. Although most employed women return to paid work after birth, the association between duration of maternity leave and postpartum depression is unclear. We therefore aimed to explore this relationship among mothers in the United States. Data included 177 mothers from a national survey who had returned to work full time after having a baby. Multivariable logistic regression was used to explore the independent association between duration of maternity leave and experiencing of postpartum depressive symptoms in the 2 weeks preceding the postpartum survey completion. Overall, duration of maternity leave was not significantly associated with experiencing postpartum depression symptoms (odds ratio [OR], 0.90; 95% confidence interval [CI], 0.80-1.01). This effect, however, varied by duration of maternity leave. Among women who took maternity leaves of 12 weeks or less, every additional week of leave was associated with a lesser odds of experiencing postpartum depressive symptoms (OR, 0.58; 95% CI, 0.40-0.84). Among women who took maternity leaves longer than 12 weeks, leave duration was not associated with postpartum depression symptoms (OR, 0.97; 95% CI, 0.73-1.29). Maternity leaves equaling 12 weeks or less may contribute additional risk for postpartum depressive symptoms, possibly because mothers are juggling employment alongside of important physical and emotional changes during this period. This association underscores the importance of ensuring that mothers have at least 12 weeks of leave from full-time employment after the birth of a baby. Copyright © 2018 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

  16. Positioning devices for patients

    International Nuclear Information System (INIS)

    Heavens, M.

    1981-01-01

    It has been suggested that it is very important to position patients reproducibly at different stages of radiotherapy treatment planning and treatment, or similar procedures. Devices have been described for positioning a patient's upper and lower thorax. This invention provides reproducible positioning for a female patient's breasts, for example in planning treatment of and treating breast tumours. The patient is placed prone, using for example an upper thorax device. A support device is placed central to and beneath her breasts to partially displace them outwards. The device may be triangular in section with one apex contacting the chest wall at the sternum. Restraining straps may be provided to hold the breasts against the support device. Means may be provided to take a healthy breast from the path of radiation through the tumour. (author)

  17. Safety rod driving device

    International Nuclear Information System (INIS)

    Murakami, Kiyonobu; Kurosaki, Akira.

    1988-01-01

    Purpose: To rapidly insert safety rods for a criticality experiment device into a reactor core container to stop the criticality reaction thereby prevent reactivity accidents. Constitution: A cylinder device having a safety rod as a cylinder rod attached with a piston at one end is constituted. The piston is elevated by pressurized air and attracted and fixed by an electromagnet which is a stationary device disposed at the upper portion of the cylinder. If the current supply to the electromagnet is disconnected, the safety rod constituting the cylinder rod is fallen together with the piston to the lower portion of the cylinder. Since the cylinder rod driving device has neither electrical motor nor driving screw as in the conventional device, necessary space can be reduced and the weight is decreased. In addition, since the inside of the nuclear reactor can easily be shielded completely from the external atmosphere, leakage of radioactive materials can be prevented. (Horiuchi, T.)

  18. Compound semiconductor device modelling

    CERN Document Server

    Miles, Robert

    1993-01-01

    Compound semiconductor devices form the foundation of solid-state microwave and optoelectronic technologies used in many modern communication systems. In common with their low frequency counterparts, these devices are often represented using equivalent circuit models, but it is often necessary to resort to physical models in order to gain insight into the detailed operation of compound semiconductor devices. Many of the earliest physical models were indeed developed to understand the 'unusual' phenomena which occur at high frequencies. Such was the case with the Gunn and IMPATI diodes, which led to an increased interest in using numerical simulation methods. Contemporary devices often have feature sizes so small that they no longer operate within the familiar traditional framework, and hot electron or even quantum­ mechanical models are required. The need for accurate and efficient models suitable for computer aided design has increased with the demand for a wider range of integrated devices for operation at...

  19. Metallic spintronic devices

    CERN Document Server

    Wang, Xiaobin

    2014-01-01

    Metallic Spintronic Devices provides a balanced view of the present state of the art of metallic spintronic devices, addressing both mainstream and emerging applications from magnetic tunneling junction sensors and spin torque oscillators to spin torque memory and logic. Featuring contributions from well-known and respected industrial and academic experts, this cutting-edge work not only presents the latest research and developments but also: Describes spintronic applications in current and future magnetic recording devicesDiscusses spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device architectures and modelingExplores prospects of STT-MRAM scaling, such as detailed multilevel cell structure analysisInvestigates spintronic device write and read optimization in light of spintronic memristive effectsConsiders spintronic research directions based on yttrium iron garnet thin films, including spin pumping, magnetic proximity, spin hall, and spin Seebeck effectsProposes unique solutions for ...

  20. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  1. Paid Educational Leave and Self-Directed Learning: Implications for Legislation on the Learning Leave Scheme in South Korea

    Science.gov (United States)

    Oh, Jeong Rok; Park, Cho Hyun; Jo, Sung Jun

    2016-01-01

    Purpose: The purposes of this study are to explore paid educational leave (PEL), self-directed learning (SDL) and the relationship between them; and to identify the implications for legislation on the learning leave scheme in South Korea. Design/Methodology/Approach: The research method of the study is a literature review. Articles were identified…

  2. Baking exhaustion device in thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, Mitsunori.

    1987-02-02

    Purpose: To rapidly remove tritium and impurity from the vacuum region in the access port of the baking exhaustion device in a thermonuclear device. Constitution: Each of the gaps at the boundary between a fixed shielding member and a blanket module and at the boundary between the blanket and a divertor is made extremely small so as to minimize the neutron streaming from plasmas. Accordingly, in the case of evacuating the vacuum region in the access port, the gap conductance is extremely poor and the exhaustion speed is low. Then, baking pipeways for flowing high temperature fluids are embedded to the surface layer at the position facing to the vacuum region and the plasma evacuation duct and the vacuum region are connected with an evacuation duct of the access port. By flowing high temperature fluids in the pipeways and conducting evacuation, baking exhaustion can be carried out rapidly. (Kamimura, M.).

  3. Plasma facing device of thermonuclear device

    International Nuclear Information System (INIS)

    Sumita, Hideo; Ioki, Kimihiro.

    1993-01-01

    The present invention improves integrity of thermal structures of a plasma facing device. That is, in the plasma facing device, an armour block portion from a metal cooling pipe to a carbon material comprises a mixed material of the metal as the constituent material of the cooling pipe and ceramics. Then, the mixing ratio of the composition is changed continuously or stepwise to suppress peakings of remaining stresses upon production and thermal stresses upon exertion of thermal loads. Accordingly, thermal integrity of the structural materials can further be improved. In this case, a satisfactory characteristic can be obtained also by using ceramics instead of carbon for the mixed material, and the characteristic such as heat expansion coefficient is similar to that of the armour tile. (I.S.)

  4. Position measuring device

    International Nuclear Information System (INIS)

    Maeda, Kazuyuki; Takahashi, Shuichi; Maruyama, Mayumi

    1998-01-01

    The present invention provides a device capable of measuring accurate position and distance easily even at places where operator can not easily access, such as cell facilities for vitrifying radioactive wastes. Referring to a case of the vitrifying cell, an objective equipment settled in the cell is photographed by a photographing device. The image is stored in a position measuring device by way of an image input device. After several years, when the objective equipment is exchanged, a new objective equipment is photographed by a photographing device. The image is also stored in the position measuring device. The position measuring device compares the data of both of the images on the basis of pixel unit. Based on the image of the equipment before the exchange as a reference, extent of the displacement of the installation position of the equipment on the image after the exchange caused by installation error and manufacturing error is determined to decide the position of the equipment after exchange relative to the equipment before exchange. (I.S.)

  5. Incore instrumentation device

    International Nuclear Information System (INIS)

    Fujita, Kazuhiko.

    1996-01-01

    A position of a detector is detected by a driving device, and the detected values are sampled by a newly disposed central processing unit for sampling the detected values depending on the sampling position of the detected values. Since the sampling position of the detected values is detected by the driving device, the sampling position for the detection values does not rely on the speed of the driving motor of the driving device. The load on the central processing device for controlling the device is lowered by newly disposing the central processing unit for sampling detected values. When the values for the position of the detector counted after conversion to digital values reach the digital values corresponding to the detection value sampling position outputted from the central processing unit for controlling the device, a counted value comparison circuit causes the central processing unit for controlling the device to sample the detection values outputted from the detector. Then, the processing speed can be increased without interruption processings, which can save the central processing unit for sampling detection values. In addition, software can be simplified and loads can be lowered. (N.H.)

  6. Fuel pattern recognition device

    International Nuclear Information System (INIS)

    Sato, Tomomi.

    1995-01-01

    The device of the present invention monitors normal fuel exchange upon fuel exchanging operation carried out in a reactor of a nuclear power plant. Namely, a fuel exchanger is movably disposed to the upper portion of the reactor and exchanges fuels. An exclusive computer receives operation signals of the fuel exchanger during operation as inputs, and outputs reactor core fuel pattern information signals to a fuel arrangement diagnosis device. An underwater television camera outputs image signals of a fuel pattern in the reactor core to an image processing device. If there is any change in the image signals for the fuel pattern as a result of the fuel exchange operation of the fuel exchanger, the image processing device outputs the change as image signals to the fuel pattern diagnosis device. The fuel pattern diagnosis device compares the pattern information signals from the exclusive computer with the image signals from the image processing device, to diagnose the result of the fuel exchange operation performed by the fuel exchanger and inform the diagnosis by means of an image display. (I.S.)

  7. Parental leave: comparing children's hospitals with Fortune 500 companies.

    Science.gov (United States)

    Weiss, A H; Gordon, E J; O'Connor, M E

    1998-07-01

    To identify parental leave policies and availability of support systems for new parents employed by children's hospitals and compare these benefits with those offered by Fortune 500 companies. Telephone or facsimile survey of all (n=118) children's hospitals and pediatric medical centers in the National Association of Children's Hospitals and Related Institutions 1995 Directory of Members, and 118 geographically matched Fortune 500 companies. Policies for maternity and paternity leave, adoption benefits, and support services for new parents were compared. Ninety-four children's hospitals (80%) and 82 Fortune 500 companies (69%) responded to the survey. No difference in duration of maternity (P>.30) or paternity (P=.12) leave was found. Sixty-two companies (77%) classified maternity leave as short-term disability while 47 hospitals (50%) classified it as sick time (Pleave as short-term disability generally gives better benefits to employees with short duration of service, whereas classifying maternity leave as sick time usually favors employees with longer employment. Companies provided more financial support for adoption expenses (Ppaid or unpaid leave for adoption (P=.14). Hospitals provided more on-site day care (69% vs 42%; Pparental leave benefits than Fortune 500 companies; however, they offer better support systems for parents returning to work after the birth of a child.

  8. Phloem unloading in developing leaves of sugar beet

    International Nuclear Information System (INIS)

    Schmalstig, J.G.

    1985-01-01

    Physiological and transport data support a symplastic pathway for phloem unloading in developing leaves of sugar beet (Beta vulgaris L. Klein E, multigerm). The sulfhydryl inhibitor parachloromercuribenzene sulfonic acid (PCMBS) inhibited uptake of [ 14 C]-sucrose added to the free space of developing leaves, but did not affect import of [ 14 C]-sucrose during steady-state 14 CO 2 labeling of a source leaf. The passively-transported xenobiotic sugar, [ 14 C]-L-glucose did not readily enter mesophyll cells when supplied through the cut end of the petiole of a sink leaf as determined by whole leaf autoradiography. In contrast, [ 14 C]-L-glucose translocated through the phloem from a mature leaf, rapidly entered mesophyll cells, and was evenly distributed between mesophyll and veins. Autoradiographs of developing leaves following a pulse of 14 CO 2 to a source leaf revealed rapid passage of phloem translocated into progressively higher order veins as the leaf developed. Entry into V order veins occurred during the last stage of import through the phloem. Import into developing leaves was inhibited by glyphosate (N-phosphomethylglycine), a herbicide which inhibits the aromatic amino acid pathway and hence protein synthesis. Glyphosate also stopped net starch accumulation in sprayed mature leaves, but did not affect export of carbon from treated leaves during the time period that import into developed leaves was inhibited

  9. RNs and LPNs: emotional exhaustion and intention to leave.

    Science.gov (United States)

    Havaei, Farinaz; MacPhee, Maura; Dahinten, V Susan

    2016-04-01

    To describe and compare registered nurse (RN) and licensed practical nurse (LPN) emotional exhaustion, intention to leave and reasons for leaving. Different skill mix/care delivery models are being used to address nurse shortages and rising health-care costs. Skill mix may include RNs and LPNs. More LPNs are being employed in areas, such as acute care, that have been previously staffed by all RNs. Little is known about nurse outcomes since the introduction of LPNs to acute care settings. This study was a cross-sectional correlational design. A stratified, random sample of acute care nurses completed surveys via Fluidsurveys. The survey was modelled after the RN4CAST nursing workforce survey. For both groups of nurses higher levels of emotional exhaustion were associated with intention to leave and workload was the most frequent reason cited for intention to leave. More RNs than LPNs cited career advancement as a reason to leave, and more LPNs than RNs identified poor salary as a reason to leave. Emotional exhaustion is linked to intention to leave health care. Nurse managers should address work environment factors associated with turnover intentions, such as professional development opportunities and shared decision-making. © 2015 John Wiley & Sons Ltd.

  10. An experimental study on drying kinetics of some herbal leaves

    International Nuclear Information System (INIS)

    Kaya, Ahmet; Aydin, Orhan

    2009-01-01

    In this study, thin-layer drying characteristics of some herbal leaves, mainly nettle and mint leaves, are investigated experimentally in a convective drier. Effects of the drying air parameters including temperature, velocity and relative humidity on the total drying time are determined. Initially, sorption isotherms of the dried leaves are determined for different temperatures and equilibrium relative humidity (e.r.h.). Experiments are conducted for air temperatures at 35, 45 and 55 deg. C, velocities at 0.2, 0.4 and 0.6 m/s and, relative humidity values at 40%, 55% and 70%. In the ranges that covered, the values of the moisture diffusivity D eff are obtained between 1.744 x 10 -9 and 4.992 x 10 -9 m 2 /s for nettle leaves and 1.975 x 10 -9 and 6.172 x 10 -9 m 2 /s for mint leaves from the Fick's diffusion model. Using D eff , the value of E a is determined assuming the Arrhenius-type temperature relationship, which varies from 79.873 to 109.003 kJ/mol for nettle leaves and 66.873 to 71.987 kJ/mol for mint leaves

  11. An experimental study on drying kinetics of some herbal leaves

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, Ahmet; Aydin, Orhan [Karadeniz Technical University, Department of Mechanical Engineering, 61080 Trabzon (Turkey)

    2009-01-15

    In this study, thin-layer drying characteristics of some herbal leaves, mainly nettle and mint leaves, are investigated experimentally in a convective drier. Effects of the drying air parameters including temperature, velocity and relative humidity on the total drying time are determined. Initially, sorption isotherms of the dried leaves are determined for different temperatures and equilibrium relative humidity (e.r.h.). Experiments are conducted for air temperatures at 35, 45 and 55 C, velocities at 0.2, 0.4 and 0.6 m/s and, relative humidity values at 40%, 55% and 70%. In the ranges that covered, the values of the moisture diffusivity D{sub eff} are obtained between 1.744 x 10{sup -9} and 4.992 x 10{sup -9} m{sup 2}/s for nettle leaves and 1.975 x 10{sup -9} and 6.172 x 10{sup -9} m{sup 2}/s for mint leaves from the Fick's diffusion model. Using D{sub eff}, the value of E{sub a} is determined assuming the Arrhenius-type temperature relationship, which varies from 79.873 to 109.003 kJ/mol for nettle leaves and 66.873 to 71.987 kJ/mol for mint leaves. (author)

  12. Abscisic acid biosynthesis in leaves and roots of Xanthium strumarium

    International Nuclear Information System (INIS)

    Creelman, R.A.; Gage, D.A.; Stults, J.T.; Zeevaart, J.A.D.

    1987-01-01

    Research on the biosynthesis of abscisic acid (ABA) has focused primarily on two pathways: (a) the direct pathway from farnesyl pyrophosphate, and (b) the indirect pathway involving a carotenoid precursor. The authors have investigated which biosynthetic pathway is operating in turgid and stressed Xanthium leaves, and in stressed Xanthium roots using long-term incubations in 18 O 2 . It was found that in stressed leaves three atoms of 18 O from 18 O 2 are incorporated into the ABA molecule, and that the amount of 18 O incorporated increases with time. One 18 O atom is incorporated rapidly into the carboxyl group of ABA, whereas the other two atoms are very slowly incorporated into the ring oxygens. The fourth oxygen atom in the carboxyl group of ABA is derived from water. ABA from stressed roots of Xanthium incubated in 18 O 2 shows a labeling pattern similar to that of ABA in stressed leaves, but with incorporation of more 18 O into the tertiary hydroxyl group at C-1' after 6 and 12 hours than found in ABA from stressed leaves. It is proposed that the precursors to stress-induced ABA are xanthophylls, and that a xanthophyll lacking an oxygen function at C-6 plays a crucial role in ABA biosynthesis in Xanthium roots. In turgid Xanthium leaves, 18 O is incorporated into ABA to a much lesser extent that it is in stressed leaves, whereas exogenously applied 14 C-ABA is completely catabolized within 48 hours. This suggests that ABA in turgid leaves is either (a) made via a biosynthetic pathway which is different from the one in stressed leaves, or (b) has a half-life on the order of days as compared with a half-life of 15.5 hours in water-stressed Xanthium leaves. Phaseic acid showed a labeling pattern similar to that of ABA, but with an additional 18 O incorporated during 8'-hydroxylation of ABA to phaseic acid

  13. Resveratrols in grape berry skins and leaves in vitis germplasm.

    Science.gov (United States)

    Wang, Lijun; Xu, Man; Liu, Chunyan; Wang, Junfang; Xi, Huifen; Wu, Benhong; Loescher, Wayne; Duan, Wei; Fan, Peige; Li, Shaohua

    2013-01-01

    Resveratrol is an important stilbene that benefits human health. However, it is only distributed in a few species including grape and is very expensive. At present, grape has been an important source resveratrol. However, the details are scarce on resveratrol distribution in different Vitis species or cultivars. The composition and content of resveratrols were investigated by HPLC for assessing genotypic variation in berry skins and leaves of 75 grape cultivars, belonging to 3 species and 7 interspecific hybrids. Trans-resveratrol, cis-piceid and trans-piceid were detected in berry skins and leaves, but cis-resveratrol was not. Resveratrol content largely varied with genetic background as well as usage. In most cultivars, total resveratrol including the above three compounds was higher in berry skins than leaves. In berry skins of most cultivars and leaves of almost all cultivars, cis-piceid was the most abundant resveratrol; trans-resveratrol and trans-piceid were minor components. Some specific cultivars were found with extremely high levels of trans-resveratrol, cis- piceid, trans-piceid or total resveratrols in berry skins or leaves. In skins and leaves, rootstock cultivars had a higher content of total resveratrols, and the cultivated European type cultivars and their hybrids with V. labrusca had relatively low totals. There were no significant correlations of the amounts of total resveratrols or any individual resveratrol between berry skins and leaves. All 75 cultivars can be divided into four groups based on the composition of resveratrols and their concentration by principal component analysis. Resveratrol content of grape berries and leaves varied largely with their genetic background and usage. Rootstock cultivars had a higher content of total resveratrols than the other germplasm. Total resveratrols were lower in leaves than berry skins in most cultivars. Cis-piceid was the most abundant resveratrol in most cultivars, and trans-res and trans-pd were

  14. Abscisic Acid Biosynthesis in Leaves and Roots of Xanthium strumarium.

    Science.gov (United States)

    Creelman, R A; Gage, D A; Stults, J T; Zeevaart, J A

    1987-11-01

    RESEARCH ON THE BIOSYNTHESIS OF ABSCISIC ACID (ABA) HAS FOCUSED PRIMARILY ON TWO PATHWAYS: (a) the direct pathway from farnesyl pyrophosphate, and (b) the indirect pathway involving a carotenoid precursor. We have investigated which biosynthetic pathway is operating in turgid and stressed Xanthium leaves, and in stressed Xanthium roots using long-term incubations in (18)O(2). It was found that in stressed leaves three atoms of (18)O from (18)O(2) are incorporated into the ABA molecule, and that the amount of (18)O incorporated increases with time. One (18)O atom is incorporated rapidly into the carboxyl group of ABA, whereas the other two atoms are very slowly incorporated into the ring oxygens. The fourth oxygen atom in the carboxyl group of ABA is derived from water. ABA from stressed roots of Xanthium incubated in (18)O(2) shows a labeling pattern similar to that of ABA in stressed leaves, but with incorporation of more (18)O into the tertiary hydroxyl group at C-1' after 6 and 12 hours than found in ABA from stressed leaves. It is proposed that the precursors to stress-induced ABA are xanthophylls, and that a xanthophyll lacking an oxygen function at C-6 (carotenoid numbering scheme) plays a crucial role in ABA biosynthesis in Xanthium roots. In turgid Xanthium leaves, (18)O is incorporated into ABA to a much lesser extent than it is in stressed leaves, whereas exogenously applied (14)C-ABA is completely catabolized within 48 hours. This suggests that ABA in turgid leaves is either (a) made via a biosynthetic pathway which is different from the one in stressed leaves, or (b) has a half-life on the order of days as compared with a half-life of 15.5 hours in water-stressed Xanthium leaves. Phaseic acid showed a labeling pattern similar to that of ABA, but with an additional (18)O incorporated during 8'-hydroxylation of ABA to phaseic acid.

  15. Diamond semiconducting devices

    International Nuclear Information System (INIS)

    Polowczyk, M.; Klugmann, E.

    1999-01-01

    Many efforts to apply the semiconducting diamond for construction of electronic elements: resistors, thermistors, photoresistors, piezoresistors, hallotrons, pn diodes, Schottky diodes, IMPATT diodes, npn transistor, MESFETs and MISFETs are reviewed. Considering the possibilities of acceptor and donor doping, electrical resistivity and thermal conductivity of diamond as well as high electric-field breakdown points, that diamond devices could be used at about 30-times higher frequency and more then 8200 times power than silicon devices. Except that, due to high heat resistant of diamond, it is concluded that diamond devices can be used in environment at high temperature, range of 600 o C. (author)

  16. Fundamentals of semiconductor devices

    CERN Document Server

    Lindmayer, Joseph

    1965-01-01

    Semiconductor properties ; semiconductor junctions or diodes ; transistor fundamentals ; inhomogeneous impurity distributions, drift or graded-base transistors ; high-frequency properties of transistors ; band structure of semiconductors ; high current densities and mechanisms of carrier transport ; transistor transient response and recombination processes ; surfaces, field-effect transistors, and composite junctions ; additional semiconductor characteristics ; additional semiconductor devices and microcircuits ; more metal, insulator, and semiconductor combinations for devices ; four-pole parameters and configuration rotation ; four-poles of combined networks and devices ; equivalent circuits ; the error function and its properties ; Fermi-Dirac statistics ; useful physical constants.

  17. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1972-01-01

    Electronic Devices and Circuits, Volume 3 provides a comprehensive account on electronic devices and circuits and includes introductory network theory and physics. The physics of semiconductor devices is described, along with field effect transistors, small-signal equivalent circuits of bipolar transistors, and integrated circuits. Linear and non-linear circuits as well as logic circuits are also considered. This volume is comprised of 12 chapters and begins with an analysis of the use of Laplace transforms for analysis of filter networks, followed by a discussion on the physical properties of

  18. Evolution of atherectomy devices.

    Science.gov (United States)

    Al Khoury, G; Chaer, R

    2011-08-01

    Percutaneous atherectomy provides an alternative approach to the endovascular treatment of peripheral atherosclerotic occlusive disease beyond angioplasty and stenting, and has the theoretical advantage of lesion debulking and minimizing barotrauma to the vessel wall. Atherectomy has evolved greatly during the last decade, with currently four FDA approved devices for the treatment of peripheral arterial disease. Several reports have focused on the initial technical success rates, and demonstrated the safety and short as well as mid-term efficacy of atherectomy devices. This article will review the evolution of current atherectomy devices and the associated literature.

  19. Introduction to Semiconductor Devices

    Science.gov (United States)

    Brennan, Kevin F.

    2005-03-01

    This volume offers a solid foundation for understanding the most important devices used in the hottest areas of electronic engineering today, from semiconductor fundamentals to state-of-the-art semiconductor devices in the telecommunications and computing industries. Kevin Brennan describes future approaches to computing hardware and RF power amplifiers, and explains how emerging trends and system demands of computing and telecommunications systems influence the choice, design and operation of semiconductor devices. In addition, he covers MODFETs and MOSFETs, short channel effects, and the challenges faced by continuing miniaturization. His book is both an excellent senior/graduate text and a valuable reference for practicing engineers and researchers.

  20. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  1. Physics of photonic devices

    CERN Document Server

    Chuang, Shun Lien

    2009-01-01

    The most up-to-date book available on the physics of photonic devices This new edition of Physics of Photonic Devices incorporates significant advancements in the field of photonics that have occurred since publication of the first edition (Physics of Optoelectronic Devices). New topics covered include a brief history of the invention of semiconductor lasers, the Lorentz dipole method and metal plasmas, matrix optics, surface plasma waveguides, optical ring resonators, integrated electroabsorption modulator-lasers, and solar cells. It also introduces exciting new fields of research such as:

  2. Output hardcopy devices

    CERN Document Server

    Durbeck, Robert

    1988-01-01

    Output Hardcopy Devices provides a technical summary of computer output hardcopy devices such as plotters, computer output printers, and CRT generated hardcopy. Important related technical areas such as papers, ribbons and inks, color techniques, controllers, and character fonts are also covered. Emphasis is on techniques primarily associated with printing, as well as the plotting capabilities of printing devices that can be effectively used for computer graphics in addition to their various printing functions. Comprised of 19 chapters, this volume begins with an introduction to vector and ras

  3. A gauge device

    International Nuclear Information System (INIS)

    Qurnell, F.D.; Patterson, C.B.

    1982-01-01

    A readily transportable device of relative light weight comprising a pair of tensioned guides for providing accurate and stable reference planes. An embodiment comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a pair of arcuate compression members. The tensioned guides provide planes of reference for measuring devices moved therealong adjacent to a component to be measured. The device is especially useful for making on-site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (author)

  4. Compound semiconductor device physics

    CERN Document Server

    Tiwari, Sandip

    2013-01-01

    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those inter

  5. Digital communication device

    DEFF Research Database (Denmark)

    2005-01-01

    The invention concerns a digital communication device like a hearing aid or a headset. The hearing aid or headset has a power supply, a signal processing device, means for receiving a wireless signal and a receiver or loudspeaker, which produces an audio signal based on a modulated pulsed signal...... point is provided which is in electrical contact with the metal of the metal box and whereby this third connection point is connected to the electric circuitry of the communication device at a point having a stable and well defined electrical potential. In this way the electro-and magnetic radiation...

  6. Powering biomedical devices

    CERN Document Server

    Romero, Edwar

    2013-01-01

    From exoskeletons to neural implants, biomedical devices are no less than life-changing. Compact and constant power sources are necessary to keep these devices running efficiently. Edwar Romero's Powering Biomedical Devices reviews the background, current technologies, and possible future developments of these power sources, examining not only the types of biomedical power sources available (macro, mini, MEMS, and nano), but also what they power (such as prostheses, insulin pumps, and muscular and neural stimulators), and how they work (covering batteries, biofluids, kinetic and ther

  7. Mycobacterium goodii endocarditis following mitral valve ring annuloplasty.

    Science.gov (United States)

    Parikh, Rohan B; Grant, Matthew

    2017-03-21

    Mycobacterium goodii is an infrequent human pathogen which has been implicated in prosthesis related infections and penetrating injuries. It is often initially misidentified as a gram-positive rod by clinical microbiologic laboratories and should be considered in the differential diagnosis. We describe here the second reported case of M. goodii endocarditis. Species level identification was performed by 16S rDNA (ribosomal deoxyribonucleic acid) gene sequencing. The patient was successfully treated with mitral valve replacement and a prolonged combination of ciprofloxacin and trimethoprim/sulfamethoxazole. Confirmation of the diagnosis utilizing molecular techniques and drug susceptibility testing allowed for successful treatment of this prosthetic infection.

  8. [Teacher sick leave: Prevalence, duration, reasons and covariates].

    Science.gov (United States)

    Vercambre-Jacquot, M-N; Gilbert, F; Billaudeau, N

    2018-02-01

    Absences from work have considerable social and economic impact. In the education sector, the phenomenon is particularly worrying since teacher sick leave has an impact on the overall performance of the education system. Yet, available data are scarce. In April-June 2013, 2653 teachers responded to a population-based postal survey on their quality of life (enquête Qualité de vie des enseignants, MGEN Foundation/Ministry of education, response rate 53 %). Besides questions on work environment and health, teachers were asked to describe their eventual sick leave(s) since the beginning of the school year: duration, type and medical reasons. Self-reported information was reinforced by administrative data from ministerial databases and weighted to be extrapolated to all French teachers. Tobit models adjusted for individual factors of a private nature were used to investigate different occupational risk factors of teacher sick leave, taking into account both the estimated effect on the probability of sick leave and the length of it. More than one in three teachers (36 %) reported having had at least one day of sick leave since the beginning of the school year. Respiratory/ENT diseases were the leading reason for sick leave (37 %). However, and because sick leave duration depended on the underlying health problem, such diseases came in third place among justifications of sick leave days (14 %), far behind musculoskeletal problems (27 %) and neurological and psychological disorders (25 %). Tobit models suggested that some occupational factors significantly associated with the risk of sick leave may represent promising preventive targets, including high psychological demand, workplace violence and unfavorable socio-environmental context. Our study provides objective evidence about the issue of sick leave among French teachers, highlighting the usefulness of implementing actions to minimize its weight. To this end, the study findings point-out the importance of

  9. Ozone injury increases infection of geranium leaves by Botrytis cinerea

    Energy Technology Data Exchange (ETDEWEB)

    Manning, W.J.; Feder, W.A.; Perkins, I.

    1970-04-01

    Detached and attached, inoculated and noninoculated, ozone-injured and noninjured leaves from the lower, middle, and terminal regions of plants of geranium cultivars Enchantress and White Mountain were observed for infection by Botrytis cinerea. Previous exposure to ozone did not appreciably influence the susceptibility of leaves of either geranium cultivar to infection by B. cinerea, unless there was visible ozone injury. Ozone-injured, necrotic tissues on older attached and detached geranium leaves of both cultivars served as infection courts for B. cinerea. 14 references, 1 table.

  10. [Studies on phenolic constituents from leaves of pineapple (Ananas comosus)].

    Science.gov (United States)

    Wang, Wei; Ding, Yi; Xing, Dong-ming; Wang, Jin-ping; Du, Li-jun

    2006-08-01

    To study the phenolic constituents of the leaves of pineapple. Chromatographic methods were used to isolate compounds from the leaves of pineapple and spectroscopic methods were used to identify the structures of the isolated compounds. 7 compounds, ananasate (1), 1-O-caffeoylglycerol (2), 1-O-p-coumaroylglycerol (3), caffeic acid (4), p-coumaric acid (5), beta-sitosterol (6) and daucosterol (7), were isolated from the leaves of pineapple. 1 was a new compound, and others were obtained from this plant for the first time.

  11. Leave-two-out stability of ontology learning algorithm

    International Nuclear Information System (INIS)

    Wu, Jianzhang; Yu, Xiao; Zhu, Linli; Gao, Wei

    2016-01-01

    Ontology is a semantic analysis and calculation model, which has been applied to many subjects. Ontology similarity calculation and ontology mapping are employed as machine learning approaches. The purpose of this paper is to study the leave-two-out stability of ontology learning algorithm. Several leave-two-out stabilities are defined in ontology learning setting and the relationship among these stabilities are presented. Furthermore, the results manifested reveal that leave-two-out stability is a sufficient and necessary condition for ontology learning algorithm.

  12. 29 CFR 825.203 - Scheduling of intermittent or reduced schedule leave.

    Science.gov (United States)

    2010-07-01

    ... leave intermittently or on a reduced leave schedule for planned medical treatment, then the employee... 29 Labor 3 2010-07-01 2010-07-01 false Scheduling of intermittent or reduced schedule leave. 825... OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Employee Leave Entitlements Under the...

  13. LEAVE OF ABSENCE PRACTICES IN SOUTH DAKOTA SCHOOLS--SCHOOL YEAR 1964-65.

    Science.gov (United States)

    South Dakota Education Association, Pierre.

    IN ADDITION TO SCHOOL POLICIES RELATING TO TEACHER LEAVES OF ABSENCE IN SOUTH DAKOTA, STATE BY STATE SUMMARIES OF EDUCATIONAL LEGISLATION REGARDING SICK LEAVE, MATERNITY LEAVE, AND SABBATICAL LEAVE ARE PRESENTED IN THIS DOCUMENT. OF THE 228 RESPONDING SCHOOLS IN SOUTH DAKOTA, 215 REPORTED EXISTING SICK LEAVE POLICIES. THE MAJORITY OF RESPONDING…

  14. Sodium aerosol recovering device

    International Nuclear Information System (INIS)

    Fujimori, Koji; Ueda, Mitsuo; Tanaka, Kazuhisa.

    1997-01-01

    A main body of a recovering device is disposed in a sodium cooled reactor or a sodium cooled test device. Air containing sodium aerosol is sucked into the main body of the recovering device by a recycling fan and introduced to a multi-staged metal mesh filter portion. The air about against each of the metal mesh filters, and the sodium aerosol in the air is collected. The air having a reduced sodium aerosol concentration circulates passing through a recycling fan and pipelines to form a circulation air streams. Sodium aerosol deposited on each of the metal mesh filters is scraped off periodically by a scraper driving device to prevent clogging of each of the metal filters. (I.N.)

  15. Incore monitoring device

    International Nuclear Information System (INIS)

    Tai, Ichiro; Shirayama, Shin-pei; Nozaki, Shin-ichi.

    1978-01-01

    Purpose: To provide an incore monitoring device wherein both radiation monitoring and acoustic monitoring are carried out simultaneously by one detector, whereby installation of the device and signal pick-up are facilitated. Incore conditions are accurately grasped. Constitution: When a neutron is irradiated in a state where a DC voltage is applied between the electrode and the vessel in the device, an ionization current is occured by (n.γ) reaction of the transformed substance as in an ionization chamber, Accordingly, a voltage drop occurs at both ends of the resistor of the radiation signal processing system, as a result of which a neutron flux can be detected. Further, when a sound is generated in the reactor, the monitoring device bottom wall which formed by a piezoelectric element detects the sound-waves. This output signal is picked up by the acoustic signal processing system to judge the generation of sound. (Aizawa, K.)

  16. Authenticated sensor interface device

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Jody Rustyn; Poland, Richard W.

    2018-05-01

    A system and method for the secure storage and transmission of data is provided. A data aggregate device can be configured to receive secure data from a data source, such as a sensor, and encrypt the secure data using a suitable encryption technique, such as a shared private key technique, a public key encryption technique, a Diffie-Hellman key exchange technique, or other suitable encryption technique. The encrypted secure data can be provided from the data aggregate device to different remote devices over a plurality of segregated or isolated data paths. Each of the isolated data paths can include an optoisolator that is configured to provide one-way transmission of the encrypted secure data from the data aggregate device over the isolated data path. External data can be received through a secure data filter which, by validating the external data, allows for key exchange and other various adjustments from an external source.

  17. Plant abnormality inspection device

    International Nuclear Information System (INIS)

    Takenaka, Toshio.

    1990-01-01

    The present invention concerns a plant abnormality inspection device for conducting remote or automatic patrolling inspection in a plant and, more particularly, relates to such a device as capable of detecting abnormal odors. That is, the device comprises a moving device for moving to a predetermined position in the plant, a plurality of gas sensors for different kind of gases to be inspected mounted thereon, a comparator for comparing the concentration of a gas detected by the gas sensor with the normal gas concentration at the predetermined position and a judging means for judging the absence or presence of abnormality depending on the combination of the result of the comparison and deliverying a signal if the state is abnormal. As a result, a slight amount of gas responsible to odors released upon abnormality of the plant can be detected by a plurality of gas sensors for different kinds gases to rapidly and easily find abnormal portions in the plant. (I.S.)

  18. Geometry and Cloaking Devices

    Science.gov (United States)

    Ochiai, T.; Nacher, J. C.

    2011-09-01

    Recently, the application of geometry and conformal mappings to artificial materials (metamaterials) has attracted the attention in various research communities. These materials, characterized by a unique man-made structure, have unusual optical properties, which materials found in nature do not exhibit. By applying the geometry and conformal mappings theory to metamaterial science, it may be possible to realize so-called "Harry Potter cloaking device". Although such a device is still in the science fiction realm, several works have shown that by using such metamaterials it may be possible to control the direction of the electromagnetic field at will. We could then make an object hidden inside of a cloaking device. Here, we will explain how to design invisibility device using differential geometry and conformal mappings.

  19. Reactor noise monitoring device

    International Nuclear Information System (INIS)

    Yamanaka, Hiroto.

    1990-01-01

    The present invention concerns a reactor noise monitoring device by detecting abnormal sounds in background noises. Vibration sounds detected by accelerometers are applied to a loose parts detector. The detector generates high alarm if there are sudden impact sounds in the background noises and applies output signals to an accumulation device. If there is slight impact sounds in the vicinity of any of the accelerometers, the accumulation device accumulates the abnormal sounds assumed to be generated from an identical site while synchronizing the waveforms for all of the channels. Then, the device outputs signals in which the background noises are cancelled, as detection signals. Therefore, S/N ratio can be improved and the abnormal sounds contained in the background noises can be detected, to thereby improve the accuracy for estimating the position where the abnormal sounds are generated. (I.S.)

  20. Marine Sanitation Devices (MSDs)

    Science.gov (United States)

    Marine sanitation devices treat or retain sewage from vessels, and have performance standards set by the EPA. This page provides information on MSDs, including who must use an MSD, states' roles, types of MSDs and standards.

  1. MDR (Medical Device Reporting)

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database allows you to search the CDRH's database information on medical devices which may have malfunctioned or caused a death or serious injury during the...

  2. Tokapole II device

    International Nuclear Information System (INIS)

    Sprott, J.G.

    1978-05-01

    A discussion is given of the design and operation of the Tokapole II device. The following topics are considered: physics considerations, vacuum vessel, poloidal field, ring and support design, toroidal field, vacuum system, initial results, and future plans

  3. Plasma shutdown device

    International Nuclear Information System (INIS)

    Hosogane, Nobuyuki; Nakayama, Takahide.

    1985-01-01

    Purpose: To prevent concentration of plasma currents to the plasma center upon plasma shutdown in a torus type thermonuclear device by the injection of fuels to the plasma center thereby prevent plasma disruption at the plasma center. Constitution: The plasma shutdown device comprises a plasma current measuring device that measures the current distribution of plasmas confined within a vacuum vessel and outputs a control signal for cooling the plasma center when the plasma currents concentrate to the plasma center and a fuel supply device that supplies fuels to the plasma center for cooling the center. The fuels are injected in the form of pellets into the plasmas. The direction and the velocity of the injection are set such that the pellets are ionized at the center of the plasmas. (Horiuchi, T.)

  4. Ion funnel device

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Yehia M.; Chen, Tsung-Chi; Harrer, Marques B.; Tang, Keqi; Smith, Richard D.

    2017-11-21

    An ion funnel device is disclosed. A first pair of electrodes is positioned in a first direction. A second pair of electrodes is positioned in a second direction. The device includes an RF voltage source and a DC voltage source. A RF voltage with a superimposed DC voltage gradient is applied to the first pair of electrodes, and a DC voltage gradient is applied to the second pair of electrodes.

  5. Atherectomy devices: technology update

    Science.gov (United States)

    Akkus, Nuri I; Abdulbaki, Abdulrahman; Jimenez, Enrique; Tandon, Neeraj

    2015-01-01

    Atherectomy is a procedure which is performed to remove atherosclerotic plaque from diseased arteries. Atherosclerotic plaques are localized in either coronary or peripheral arterial vasculature and may have different characteristics depending on the texture of the plaque. Atherectomy has been used effectively in treatment of both coronary and peripheral arterial disease. Atherectomy devices are designed differently to either cut, shave, sand, or vaporize these plaques and have different indications. In this article, current atherectomy devices are reviewed. PMID:25565904

  6. Flexural pivot device

    International Nuclear Information System (INIS)

    Flaherty, Robert.

    1986-01-01

    A flexural pivot device or rotational actuator comprises first and sceond tubular members connected by flexural members of shape-memory-alloy. These are curved in the austenitic phase at a first temperature and after cooling to the martensitic phase are flattened. On heating one of the flexural members, it bends causing relative rotation of the tubular members. Heating of another member can produce opposite rotation. Heating is electrical or by hot gas. The device may be used in a nuclear reactor. (author)

  7. Infrared thermal annealing device

    International Nuclear Information System (INIS)

    Gladys, M.J.; Clarke, I.; O'Connor, D.J.

    2003-01-01

    A device for annealing samples within an ultrahigh vacuum (UHV) scanning tunneling microscopy system was designed, constructed, and tested. The device is based on illuminating the sample with infrared radiation from outside the UHV chamber with a tungsten projector bulb. The apparatus uses an elliptical mirror to focus the beam through a sapphire viewport for low absorption. Experiments were conducted on clean Pd(100) and annealing temperatures in excess of 1000 K were easily reached

  8. RFQ1 diagnostic devices

    International Nuclear Information System (INIS)

    Chidley, B.G.; Arbique, G.M.; de Jong, M.S.; McMichael, G.E.; Michel, W.L.; Smith, B.H.

    1991-01-01

    The diagnostic devices in use on RFQ1 will be described. They consist of a double-slit emittance-measuring unit, a 45 degree deflection energy-analysis magnet, parametric current transformers, optical beam sensors, beam-stop current monitors, and an x-ray end-point analyzer. All of these devices are able to operate up to the full output current of RFQ1 (75 mA cw at 0.6 MeV)

  9. Commercialization of microfluidic devices.

    Science.gov (United States)

    Volpatti, Lisa R; Yetisen, Ali K

    2014-07-01

    Microfluidic devices offer automation and high-throughput screening, and operate at low volumes of consumables. Although microfluidics has the potential to reduce turnaround times and costs for analytical devices, particularly in medical, veterinary, and environmental sciences, this enabling technology has had limited diffusion into consumer products. This article analyzes the microfluidics market, identifies issues, and highlights successful commercialization strategies. Addressing niche markets and establishing compatibility with existing workflows will accelerate market penetration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. The unintended consequences of maternity leaves: How agency interventions mitigate the negative effects of longer legislated maternity leaves.

    Science.gov (United States)

    Hideg, Ivona; Krstic, Anja; Trau, Raymond N C; Zarina, Tanya

    2018-06-07

    To support women in the workplace, longer legislated maternity leaves have been encouraged in Scandinavian countries and recently in Canada. Yet, past research shows that longer legislated maternity leaves (i.e., 1 year and longer) may unintentionally harm women's career progress. To address this issue, we first sought to identify one potential mechanism underlying negative effects of longer legislated maternity leaves: others' lower perceptions of women's agency. Second, we utilize this knowledge to test interventions that boost others' perceptions of women's agency and thus mitigate negative effects of longer legislated maternity leaves. We test our hypotheses in three studies in the context of Canadian maternity leave policies. Specifically, in Study 1, we found that others' lower perceptions of women's agency mediated the negative effects of a longer legislated maternity leave, that is, 1 year (vs. shorter, i.e., 1 month maternity leave) on job commitment. In Study 2, we found that providing information about a woman's agency mitigates the unintended negative effects of a longer legislated maternity leave on job commitment and hireability. In Study 3, we showed that use of a corporate program that enables women to stay in touch with the workplace while on maternity leave (compared to conditions in which no such program was offered; a program was offered but not used by the applicant; and the program was offered, but there was no information about its usage by the applicant) enhances agency perceptions and perceptions of job commitment and hireability. Implications for theory and practice are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  11. Equipment abnormality monitoring device

    International Nuclear Information System (INIS)

    Ando, Yasumasa

    1991-01-01

    When an operator hears sounds in a plantsite, the operator compares normal sounds of equipment which he previously heard and remembered with sounds he actually hears, to judge if they are normal or abnormal. According to the method, there is a worry that abnormal conditions can not be appropriately judged in a case where the number of objective equipments is increased and in a case that the sounds are changed gradually slightly. Then, the device of the present invention comprises a plurality of monitors for monitoring the operation sound of equipments, a recording/reproducing device for recording and reproducing the signals, a selection device for selecting the reproducing signals among the recorded signals, an acoustic device for converting the signals to sounds, a switching device for switching the signals to be transmitted to the acoustic device between to signals of the monitor and the recording/reproducing signals. The abnormality of the equipments can be determined easily by comparing the sounds representing the operation conditions of equipments for controlling the plant operation and the sounds recorded in their normal conditions. (N.H.)

  12. Electronic security device

    Science.gov (United States)

    Eschbach, Eugene A.; LeBlanc, Edward J.; Griffin, Jeffrey W.

    1992-01-01

    The present invention relates to a security device having a control box (12) containing an electronic system (50) and a communications loop (14) over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system (50) and a detection module (72) capable of registering changes in the voltage and phase of the signal transmitted over the loop.

  13. Organic 'Plastic' Optoelectronic Devices

    International Nuclear Information System (INIS)

    Sariciftci, N.S.

    2006-01-01

    Recent developments on conjugated polymer based photovoltaic diodes and photoactive organic field effect transistors (photOFETs) are discussed. The photophysics of such devices is based on the photoinduced charge transfer from donor type semiconducting conjugated polymers onto acceptor type conjugated polymers or acceptor molecules such as Buckminsterfullerene, C 6 0. Potentially interesting applications include sensitization of the photoconductivity and photovoltaic phenomena as well as photoresponsive organic field effect transistors (photOFETs). Furthermore, organic polymeric/inorganic nanoparticle based 'hybrid' solar cells will be discussed. This talk gives an overview of materials' aspect, charge-transport, and device physics of organic diodes and field-effect transistors. Furthermore, due to the compatibility of carbon/hydrogen based organic semiconductors with organic biomolecules and living cells there can be a great opportunity to integrate such organic semiconductor devices (biOFETs) with the living organisms. In general the largely independent bio/lifesciences and information technology of today, can be thus bridged in an advanced cybernetic approach using organic semiconductor devices embedded in bio-lifesciences. This field of bio-organic electronic devices is proposed to be an important mission of organic semiconductor devices

  14. Evaluating imaging devices

    International Nuclear Information System (INIS)

    Rollo, F.D.

    1977-01-01

    The performance of any imaging device depends on two principal factors inherent to the device, namely, plane sensitivity and spatial resolution. These factors may be defined as follows: plane sensitivity is the counts per second recorded by the imaging device for each disintegration per second per square centimeter occurring within a plane sheet of radioactivity. Spatial resolution may be defined as the fidelity with which the imaging device reproduces the activity distribution of an object in the image plane. In all imaging devices, a trade-off exists between these two parameters; that is, as sensitivity improves, spatial resolution is degraded, and vice versa. Therefore, to fully evaluate an imaging system a technique should be selected that measures both parameters and reflects the trade-off between the two. In addition, the method should approximate the clinical problem, namely, the detection of a focal lesion within an activity distribution. Several methods have been described to evaluate nuclear imaging devices. The more common techniques include the use of organ phantoms, bar phantoms, line-spread functions, modulation transfer functions, contrast efficiency functions, and performance index functions. Each of these techniques is briefly described in this chapter, and their advantages and disadvantages are discussed. In addition, a phantom that can be used to simply and completely measure overall imaging system performance is described

  15. Electronic security device

    International Nuclear Information System (INIS)

    Eschbach, E.A.; LeBlanc, E.J.; Griffin, J.W.

    1992-01-01

    The present invention relates to a security device having a control box containing an electronic system and a communications loop over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system and a detection module capable of registering changes in the voltage and phase of the signal transmitted over the loop. 11 figs

  16. Exploring a New Security Framework for Remote Patient Monitoring Devices

    Directory of Open Access Journals (Sweden)

    Brian Ondiege

    2017-02-01

    Full Text Available Security has been an issue of contention in healthcare. The lack of familiarity and poor implementation of security in healthcare leave the patients’ data vulnerable to attackers. The main issue is assessing how we can provide security in an RPM infrastructure. The findings in literature show there is little empirical evidence on proper implementation of security. Therefore, there is an urgent need in addressing cybersecurity issues in medical devices. Through the review of relevant literature in remote patient monitoring and use of a Microsoft threat modelling tool, we identify and explore current vulnerabilities and threats in IEEE 11073 standard devices to propose a new security framework for remote patient monitoring devices. Additionally, current RPM devices have a limitation on the number of people who can share a single device, therefore, we propose the use of NFC for identification in Remote Patient Monitoring (RPM devices for multi-user environments where we have multiple people sharing a single device to reduce errors associated with incorrect user identification. We finally show how several techniques have been used to build the proposed framework.

  17. Guajadial: an unusual meroterpenoid from guava leaves Psidium guajava.

    Science.gov (United States)

    Yang, Xiao-Long; Hsieh, Kun-Lung; Liu, Ji-Kai

    2007-11-22

    Guajadial (1), a novel caryophyllene-based meroterpenoid, was isolated from the Leaves of Psidium guajava (guava). The structure and relative stereochemistry of guajadial (1) were elucidated by extensive spectroscopic analysis. A possible biosynthetic pathway for 1 was proposed.

  18. Gravity effects on wind-induced flutter of leaves

    Science.gov (United States)

    Clemmer, Nickalaus; Kopperstad, Karsten; Solano, Tomas; Shoele, Kourosh; Ordonez, Juan

    2017-11-01

    Wind-Induced flutter of leaves depends on both wind velocity and the gravity. To study the gravitational effects on the oscillatory behavior of leaves in the wind, a wind tunnel that can be tilted about the center of the test section is created. This unique rotation capability allows systematic investigation of gravitational effects on the fluttering response of leaves. The flow-induced vibration will be studied for three different leaves at several different tilting angles including the wind travels horizontally, vertically downward and vertically upward. In each situation, the long axis of a leaf is placed parallel to the wind direction and its response is studied at different flow speed. Oscillation of the leaf is recorded via high-speed camera at each of setup, and the effect of the gravity on stabilizing or destabilizing the fluttering response is investigated. Summer REU student at Florida State University.

  19. Utilization of Cassava Leaves as a Vegetable in Rwanda ...

    African Journals Online (AJOL)

    . The objectives of this study were to determine cassava species from which leaves are harvested as vegetable and identify leaf preparation methods, consumption rate, price variation, storability and perception of post-harvest losses.

  20. Preventing intimate partner violence through paid parental leave policies.

    Science.gov (United States)

    D'Inverno, Ashley Schappell; Reidy, Dennis E; Kearns, Megan C

    2018-05-30

    Paid parental leave policies have the potential to strengthen economic supports, reduce family discord, and provide opportunities to empower women (Basile et al., 2016; Niolon et al., 2017). In this article, we present a theory of change and evidence to suggest how paid parental leave may impact intimate partner violence (IPV). In doing so, we present three mechanisms of change (i.e., reduction in financial stress, increase in egalitarian parenting practices, and promotion of child/parent bonding) through which paid parental leave could reduce rates of IPV. We also describe limitations of the current state of knowledge in this area, as well as opportunities for future research. Ultimately, our goal is to facilitate the identification and implementation of approaches that have the potential to reduce violence at the population level. Paid parental leave embodies the potential of policies to change societal-level factors and serve as an important prevention strategy for IPV. Copyright © 2018. Published by Elsevier Inc.

  1. THE FLABELLATE-LEAVED SPECIES OF SALACCA (PALMAE

    Directory of Open Access Journals (Sweden)

    JOHANIS P. MOGEA

    1980-03-01

    Full Text Available Salacca dransfieldiana Mogea, S. magnifica Mogea and S. sarawak-ensis Mogea are proposed as new species of flabellate-leaved Salacca.A key to the four recognized species, descriptions and illustrations arepresented.

  2. An Analysis of Sabbatical Leaves for Navy Surface Warfare Officers

    National Research Council Canada - National Science Library

    Yardley, Roland J; Thie, Harry J; Brancato, Kevin; Abbott, Megan

    2004-01-01

    ... or to attend to other personal needs. In response to these retention concerns, the Navy is considering several programs that allow greater accommodation of the personal needs of its SWOs, particularly through the increased use of sabbatical leaves...

  3. In Vivo Digestibility of Molasses-Treated Fresh Banana Leaves ...

    African Journals Online (AJOL)

    treated fresh banana leaves in West African Dwarf sheep was conducted at the Teaching and Research Farm and Animal Nutrition Laboratory of the University of Dschang between August and September 2009. For this, six sheep were used and ...

  4. GPs' negotiation strategies regarding sick leave for subjective health complaints

    DEFF Research Database (Denmark)

    Nilsen, Stein Tore; Malterud, Kirsti; Werner, Erik L.

    2015-01-01

    Objectives: To explore general practitioners ’(GPs’) specific negotiation strategies regarding sick-leave issues with patientssuffering from subjective health complaints. Design: Focus-group study. Setting: Nine focus-group interviews in three citiesin different regions of Norway. Participants: 48...... GPs (31 men, 17 women; age 32–65), participating in a course dealing with diagnostic practice and assessment of sickness certifi cates related to patients with subjective health complaints. Results: TheGPs identified some specific strategies that they claimed to apply when dealing with the question...... to sick leave. Conclusions and implications: GPs seem to have a conscious approach to negotiations of sickness certification, as they report applying specific strategies to limit the duration of sick leave due to subjective health complaints. This give-and-take way of handling sick leave negotiations has...

  5. Factors Predicting Ethiopian Anesthetists' Intention to Leave Their Job

    NARCIS (Netherlands)

    Kols, Adrienne; Kibwana, Sharon; Molla, Yohannes; Ayalew, Firew; Teshome, Mihereteab; van Roosmalen, Jos; Stekelenburg, Jelle

    BACKGROUND: Ethiopia has rapidly expanded training programs for associate clinician anesthetists in order to address shortages of anesthesia providers. However, retaining them in the public health sector has proven challenging. This study aimed to determine anesthetists' intentions to leave their

  6. Munatsi Shoko Abstract After leaving their home country ...

    African Journals Online (AJOL)

    Munatsi Shoko Abstract After leaving their home country, international migrants are faced with a challenge to seek a new family, friends, support networks, accommodation and employment. Married migrants may be forced to live separately from their spouses.

  7. Protective effect of Moringa peregrina leaves extract on ...

    African Journals Online (AJOL)

    Protective effect of Moringa peregrina leaves extract on acetaminophen - induced liver toxicity in albino rats. Samy Abdelfatah Abdel Azim, Mohamed Taha Abdelrahem, Mostafa Mohamed Said, Alshaimaa Khattab ...

  8. leaves extracts as counter stain in gram staining reaction 56

    African Journals Online (AJOL)

    DR. AMINU

    is a stain with color contrasting to the principal stain, making the stained ... technology today, the Gram's staining method remains ... was aimed at employing the use of Henna leaves extract as ... fragrant, white or rose flowers in clusters. It is.

  9. Dust retaining properties of leaves of some tree species

    Energy Technology Data Exchange (ETDEWEB)

    Gusev, M I

    1960-05-01

    A study was made in Tashkent, Russia of the dust-retaining power of leaves of several tree species. Investigations were made in a park where these tree species were growing in close proximity, exposed to the effects of dust from the main city street and from the highway passing through the park. Observations on the dust-retaining power of leaves were made mostly during the summer and fall months. The dust-retaining power of leaves of different tree species varied with the dust concentration in the air. In the summer and fall when rains are scarce a steady accumulation of dust was observed on the surface of the leaves. 1 table.

  10. Consequences Paternity Leave on Allocation of Childcare and Domestic Tasks

    Directory of Open Access Journals (Sweden)

    Esteban Torres

    2015-01-01

    Full Text Available One of the main objectives of parental leave policies aimed exclusively at fathers is to promote gender equality in the productive and reproductive spheres. The aim of this study is to examine whether the use of paternity leave fosters greater involvement of fathers in the division of tasks within the reproductive sphere, specifi cally child care and housework. Based on data from the survey, ?Social use of parental leave in Spain, 2012?, we have created multivariate models using ordinary least squares regression. The sample used in the analysis consists of 600 fathers who have had at least one child since 2007. The results suggest that paternity leave does encourage greater involvement by fathers in childcare, but the effect is limited, as it is only found for fathers after the birth of their fi rst child.

  11. The Relationship between Restraints of Trade and Garden Leave

    Directory of Open Access Journals (Sweden)

    Yeukai Mupangavanhu

    2017-06-01

    Full Text Available The purpose of the article is to examine the relationship between a so-called "garden leave" clause and a post-termination restraint of trade clause in employment contracts, in view of the decision in Vodacom (Pty Ltd v Motsa 2016 3 SA 116 (LC. The Labour Court grappled with the question of whether the enforcement of the garden leave provision impacts on the enforcement of a post-termination restraint of trade clause. Enforcement of both these types of clauses may be problematic. It can result in unfairness if an employee ends up being commercially inactive for a long period. The author argues that garden leave has a direct effect on the enforcement of a post- termination restraint of trade clause. Accordingly, a restraint of trade will be enforced only if the employer's proprietary interest requires additional protection beyond what is achieved under the garden leave clause.

  12. An alternative effective method for verifying the multileaf collimator leaves speed by using a digital-video imaging system

    International Nuclear Information System (INIS)

    Hwang, Ing-Ming; Wu, Jay; Chuang, Keh-Shih; Ding, Hueisch-Jy

    2010-01-01

    We present an alternative effective method for verifying the multileaf collimator (MLC) leaves speed using a digital-video imaging system in daily dynamic conformal radiation therapy (DCRT) and intensity-modulation radiation therapy (IMRT) in achieving increased convenience and shorter treatment times. The horizontal leaves speed measured was within 1.76-2.08 cm/s. The mean full range of traveling time was 20 s. The initial speed-up time was within 1.5-2.0 s, and the slowing-down time was within 2.0-2.5 s. Due to gravity the maximum speed-up effect in the X1 bank was +0.10 cm/s, but the lagging effect in the X2 bank was -0.20 cm/s. This technique offered an alternative method with electronic portal imaging device (EPID), charged coupled device (CCD) or a light field for the measurement of MLC leaves speed. When time taken on the linac was kept to a minimum, the image could be processed off-line.

  13. External versus Internal Distraction Devices in Treatment of Obstructive Sleep Apnea in Craniofacial Anomalies.

    Science.gov (United States)

    Rachmiel, Adi; Nseir, Saleh; Emodi, Omri; Aizenbud, Dror

    2014-07-01

    Obstructive sleep apnea is often associated with congenital craniofacial malformations due to hypoplastic mandible and decreased pharyngeal airway. In this study, we will compare external and internal distraction devices for mandibular lengthening in terms of effectiveness, results, patient comfort, and complications. Thirty-seven patients were treated by bilateral mandibular distraction osteogenesis for obstructive sleep apnea: 20 with external and 17 with internal distraction devices. Lengthening of the mandible and increase of the pharyngeal airway were obtained in all patients. Using the external devices, the average mandibular elongation was 30 mm versus 22 mm with the internal devices; however, after 1 year, the results were more stable with internal devices. External devices carried greater risk for pin tract infection than the internal devices (27.5% vs 5.88%). In addition, pin loosening in 22.5% required pin replacement or led to reduced retention period. Internal devices had a precise and predictable vector of lengthening and left less visible scars at the submandibular area but carried the disadvantage of requiring a second operation for device removal. In very young children with severe micrognathia, it was impossible to place internal devices, and external devices were used. Internal devices should be the first choice because they are more comfortable to the patients, more predictable vector of lengthening, are less vulnerable to dislodgement, and leave reduced scarring, with the great disadvantage of second operation for removal. However, external devices still should be considered mainly in severely hypoplastic cases, and the surgeon should be prepared for both options.

  14. Mother on parental leave and child in kindergarten

    OpenAIRE

    KRUPILOVÁ, Zuzana

    2013-01-01

    This thesis deals with currently expanding phenomenon of placing children of mothers on parental leave in kindergarten. This work presents the basic theoretical background of the topic. It defines the contemporary family and its changes, meaning and function of the family, changes in the concept of motherhood and the role of mother, a preschool child, current kindergartens and current legislation regulating parental leave. The second part presents the results of a questionnaire survey among m...

  15. Bioinspired leaves-on-branchlet hybrid carbon nanostructure for supercapacitors

    OpenAIRE

    Xiong, Guoping; He, Pingge; Lyu, Zhipeng; Chen, Tengfei; Huang, Boyun; Chen, Lei; Fisher, Timothy S.

    2018-01-01

    Designing electrodes in a highly ordered structure simultaneously with appropriate orientation, outstanding mechanical robustness, and high electrical conductivity to achieve excellent electrochemical performance remains a daunting challenge. Inspired by the phenomenon in nature that leaves significantly increase exposed tree surface area to absorb carbon dioxide (like ions) from the environments (like electrolyte) for photosynthesis, we report a design of micro-conduits in a bioinspired leav...

  16. Exploring audit assistants decision to leave the audit profession

    OpenAIRE

    Gertsson, Nellie; Sylvander, Johanna; Broberg, Pernilla; Friberg, Josefine

    2017-01-01

    Purpose - The purpose of this paper is to explore why audit assistants leave the audit profession. By including both the perceptions held by audit assistants that left the audit profession and the perceptions of audit assistants still working in the audit profession, this study aims to explore how determinants of job satisfaction are associated with decisions to leave the audit profession. Design/methodology/approach - To explore the association between determinants of job satisfaction and de...

  17. Pharmacognostical Studies On Leaves And Stem Of Cocculus ...

    African Journals Online (AJOL)

    The total ash values, acid insoluble ash and water soluble ash were found to be 2.20 %, 0.40 %, 0.60 % and 5.2 %,0.60 %, 1.50 % w/w for leaves and stem respectively. The loss on drying was found to be 1.21 % and 1.30 % w/w for the leaves and stem respectively. The leaf constants such as stomatal index (6.50), vein islet ...

  18. Women?s Reasons for Leaving the Engineering Field

    OpenAIRE

    Fouad, Nadya A.; Chang, Wen-Hsin; Wan, Min; Singh, Romila

    2017-01-01

    Among the different Science, Technology, Engineering, and Math fields, engineering continues to have one of the highest rates of attrition (Hewlett et al., 2008). The turnover rate for women engineers from engineering fields is even higher than for men (Frehill, 2010). Despite increased efforts from researchers, there are still large gaps in our understanding of the reasons that women leave engineering. This study aims to address this gap by examining the reasons why women leave engineering. ...

  19. Beech cupules share endophytic fungi with leaves and twigs

    OpenAIRE

    Tateno, Osamu; Hirose, Dai; Osono, Takashi; Takeda, Hiroshi

    2015-01-01

    Endophytic mycobiota on leaves, twigs and cupules of Fagus crenata were investigated using a culture-dependent method over a growing season to test the hypothesis that endophytic fungi of cupule (a woody phyllome) share some components of the endophytic fungal assemblages with both leaves and twigs. A total of 14 fungal taxa were isolated, and the most frequent taxon was Phomopsis sp., followed by Xylaria sp., Ascochyta fagi and Geniculosporium sp. The compositions of fungal assemblages of le...

  20. Collection of apoplastic fluids from Arabidopsis thaliana leaves

    DEFF Research Database (Denmark)

    Madsen, Svend Roesen; Nour-Eldin, Hussam Hassan; Halkier, Barbara Ann

    2016-01-01

    The leaf apoplast comprises the extracellular continuum outside cell membranes. A broad range of processes take place in the apoplast, including intercellular signaling, metabolite transport, and plant-microbe interactions. To study these processes, it is essential to analyze the metabolite conte...... in apoplastic fluids. Due to the fragile nature of leaf tissues, it is a challenge to obtain apoplastic fluids from leaves. Here, methods to collect apoplastic washing fluid and guttation fluid from Arabidopsis thaliana leaves are described....

  1. Plasma devices for hydrocarbon reformation

    KAUST Repository

    Cha, Min

    2017-01-01

    Plasma devices for hydrocarbon reformation are provided. Methods of using the devices for hydrocarbon reformation are also provided. The devices can include a liquid container to receive a hydrocarbon source, and a plasma torch configured

  2. Carbon partitioning and export from mature cotton leaves

    International Nuclear Information System (INIS)

    Hendrix, D.L.; Grange, R.I.

    1991-01-01

    The partitioning of carbon in intact, mature cotton (Gossypium hirsutum L.) leaves was examined by steady-state 14 CO 2 labeling. Plants were exposed to dark periods of varying lengths, followed by similar illuminated labeling periods. These treatments produced leaves with a range of starch and soluble sugar contents, carbon exchange, and carbon export rates. Export during the illuminated periods was neither highly correlated with photosynthesis nor was export during the illuminated periods significantly different among the treatments. In contrast, the rate of subsequent nocturnal carbon export from these leaves varied widely and was found to be highly correlated with leaf starch content at the end of the illumination period and with nocturnal leaf respiration. Leaves which had accumulated the highest levels of starch (about 275 micrograms per square centimeter) by the end of the illumination period exhibited nocturnal export rates very similar to those during the daylight hours. Leaves which accumulated starch to only 50 to 75 micrograms per square centimeter virtually ceased nocturnal carbon export. For leaves with starch accumulations of between 50 and 275 micrograms per square centimeter, nocturnal export was directly proportional to leaf starch at the end of the illumination period. After the nocturnal export rate was established, it continued at a constant rate throughout the night even though leaf starch and sucrose contents declined

  3. Fathers’ Experience of Shared Parental Leave in Sweden

    Directory of Open Access Journals (Sweden)

    Anders Chronholm

    2011-03-01

    Full Text Available Since the introduction of the Swedish parental leave reform in 1974, fathers have had the same rights to use parental leave as mothers. Between 2000 and 2003, a research project at the Department of Sociology, University of Gothenburg, focused on fathers who had taken more than four months of paid parental leave. The approach of the study was mainly qualitative, based upon a combination of a survey and interviews. A majority of the fathers who answered the questionnaire had been the main caregivers for their children during their parental leave. During the interviews many of the men described their mothers as role models for their fatherhood. The men also described their own partner as both anxious to get back to her work after her own parental leave period and convinced of the importance of a nurturing father. An early decision to take part of the parental leave probably made it easier for the men to reach workplace agreements. Most of the men described themselves as both nurturing fathers and as sharing housework equally. They stressed the importance of being alone with their child during a long period, to be able to develop a deep relationship with their child.

  4. Carbon partitioning and export from mature cotton leaves.

    Science.gov (United States)

    Hendrix, D L; Grange, R I

    1991-01-01

    The partitioning of carbon in intact, mature cotton (Gossypium hirsutum L.) leaves was examined by steady-state (14)CO(2) labeling. Plants were exposed to dark periods of varying lengths, followed by similar illuminated labeling periods. These treatments produced leaves with a range of starch and soluble sugar contents, carbon exchange, and carbon export rates. Export during the illuminated periods was neither highly correlated with photosynthesis nor was export during the illuminated periods significantly different among the treatments. In contrast, the rate of subsequent nocturnal carbon export from these leaves varied widely and was found to be highly correlated with leaf starch content at the end of the illumination period (r = 0.934) and with nocturnal leaf respiration (r = 0.954). Leaves which had accumulated the highest levels of starch (about 275 micrograms per square centimeter) by the end of the illumination period exhibited nocturnal export rates very similar to those during the daylight hours. Leaves which accumulated starch to only 50 to 75 micrograms per square centimeter virtually ceased nocturnal carbon export. For leaves with starch accumulations of between 50 and 275 micrograms per square centimeter, nocturnal export was directly proportional to leaf starch at the end of the illumination period. After the nocturnal export rate was established, it continued at a constant rate throughout the night even though leaf starch and sucrose contents declined.

  5. Green synthesis of silver nanoparticles using Stevia leaves extracts

    Science.gov (United States)

    Laguta, Iryna; Stavinskaya, Oksana; Kazakova, Olga; Fesenko, Tetiana; Brychka, Sergey

    2018-02-01

    Three extracts of Stevia rebaudiana (Bertoni) were prepared using different types of raw materials: leaves of plants grown ex situ, leaves of plants grown in vitro, callus culture formed on damaged leaves. Composition of the extracts was studied by means of high-performance liquid chromatography and laser desorption/ionization mass spectrometry; total phenol content was estimated using Folin-Ciocalteau method. Flavonoids and hydroxycinnamic acids were found to be the main groups of phenol antioxidants available in the Stevia leaves, with the amount of these compounds in the extract being dependent on the type of raw material. The reducing properties of phenol compounds identified in the extracts were characterized using quantum chemical method; flavonoids and hydroxycinnamic acids were found to have similar redox parameters. Silver nanoparticles (AgNPs) colloids were synthesized using three Stevia extracts; AgNPs size distribution were characterized by means of scanning electron microscopy. All the extracts revealed significant activity in AgNPs synthesis; the nanoparticles of predominantly spherical shape with the average sizes of 16-25 nm were formed. The reducing properties of the extracts were found to correlate with total phenol content; the activity of extracts from the leaves of plants grown ex situ and from callus culture in Ag+ ions reduction was similar to each other and exceeded the activity of extract from the leaves of plants grown in vitro.

  6. Experiences of occupational therapists returning to work after maternity leave.

    Science.gov (United States)

    Parcsi, Lisa; Curtin, Michael

    2013-08-01

    Returning to work after maternity leave can be a challenging, anxious and fraught experience for women, and has been portrayed in the literature as a generally negative experience. Interestingly, although occupational therapists were predominantly women, no research was found focussing on their experiences of returning to work after maternity leave. The aim of this research was to gain an insight into occupational therapists' experiences of returning to work following maternity leave. Principles of interpretive phenomenological analysis were used to explore the individual experiences of six Australian occupational therapists returning to work after a period of maternity leave. Individual semi-structured interviews lasting up to 90 minutes were conducted. Interviews were audio-recorded, transcribed and then analysed. Two major themes emerged from the analysis of interviews: compromise and feeling valued. The experience of returning to work was a process of compromise in which women found strategies to cope with their changing roles and demands, to find a balance between home and work life. The women wanted to feel valued by their managers and co-workers, as this enabled them to feel comfortable and confident with some of the compromises they made. Occupational therapists returning to work after maternity leave will make compromises so that they can balance their home and work life. Occupational therapists value managers and co-workers who understand the compromises women make when returning to work following maternity leave and who create a supportive workplace that acknowledges and values their contribution. © 2013 Occupational Therapy Australia.

  7. Supercritical Carbon Dioxide Extraction of Selected Herbal Leaves: An Overview

    Science.gov (United States)

    Hamid, I. A. Abd; Ismail, N.; Rahman, N. Abd

    2018-05-01

    Supercritical fluid extraction of carbon dioxide (SC-CO2) is one of new alternative extraction method that has been widely used to isolate bioactive components from variety of plant materials. The method was proved to be clean and safe, compatible for the extraction of edible products such as spices, food additives, medicines and nutritional supplement products compared to traditional extraction techniques such as solvent extraction, hydro distillation and steam distillation. The SC-CO2 extraction was known as highly influenced by its process parameter such as temperature and pressure for obtaining maximum yield. Therefore, a clear review on the optimum range of temperature and pressure for herbal leaves extraction using SC-CO2 is necessary for future reference. The aim of this work is to analyze the effect of temperature and pressure of SC-CO2 process without modifier on extraction yield of some selected herbal leaves i.e clubmoss, drumstick leaves, kratom leaves, mallee and myrtle leaves. The values of investigated parameters were; pressure from 8.9 to 50 MPa and temperature from 35 to 80°C. The results showed that the highest extraction yields were obtained when the pressure and temperature were above 30 MPa and 40°C. The interaction between pressure and temperature for SC-CO2 extraction of plant leaves are crucial since the values cannot be very high or very low in order to preserve the quality of the extracts.

  8. Nurse manager job satisfaction and intent to leave

    Science.gov (United States)

    Warshawsky, Nora E.; Havens, Donna S.

    2015-01-01

    Background The nurse manager role is critical to staff nurse retention and often the portal to senior nursing leadership, yet little is known about nurse managers' job satisfaction and career plans. The purpose of this study was to describe nurse managers' job satisfaction and intent to leave. Methods An electronic survey was used to collect data from 291 nurse managers working in U.S. hospitals. Findings Seventy percent were satisfied or very satisfied with their jobs and 68% were either likely or very likely to recommend nursing management as a career choice. Seventy-two percent of these nurse managers were also planning to leave their positions in the next five years. The four most common reasons reported for intent to leave included burnout, career change, retirement, and promotion. Burnout was the most common reason cited by the entire sample but the fourth most common reason for leaving cited by those nurse managers who were planning to leave and also satisfied or very satisfied with their positions. Conclusions Recommendations for nursing leaders include evaluating the workload of nurse managers, providing career counseling, and developing succession plans. Additional research is needed to understand the determinants and consequences of nurse manager job satisfaction, intent to leave, and turnover. PMID:24689156

  9. Flaw detection device

    International Nuclear Information System (INIS)

    Sasahara, Toshihiko

    1998-01-01

    The present invention provides a device for detecting welded portions of a reactor pressure vessel. Namely, the device of the present invention comprises (1) a casing to be disposed on the surface to be detected, (2) a probe driving means loaded to the casing, (3) a probe driven along the surface to be detected and (4) a pressure reduction means for keeping the hollow portion in the casing to an evacuated atmosphere. The casing comprises a flexible suction edge to be tightly in contact with the surface to be tested for maintaining the air tight state, (6) a guide wheel for moving the casing along the surface to be tested and (7) a handle for performing transferring operation. The flaw detection device thus constituted has following features. The working efficiency upon conducting detection is improved. The influence of the weight of the device on the detection is small. The device can be applied on the surface of a nonmagnetic material. The efficiency for the flaw detection can be improved. (I.S.)

  10. Electrical apparatus lockout device

    Energy Technology Data Exchange (ETDEWEB)

    Gonzales, R.

    1999-10-12

    A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

  11. Operation training aid device

    International Nuclear Information System (INIS)

    Yoshimura, Sadanori.

    1994-01-01

    The device of the present invention evaluates the propriety of an operation which is conducted optionally by a trainee depending on the state of the plant, analyzes the cause of an operation error and aids the preparation of training policy and teaching materials based on the results of the evaluation and the analysis. Namely, an operation data collection device collects operation data for the plant operation conducted by the trainee and the state of the plant during the operation. Since an operation evaluation device evaluates the plant operation in a short period of time based on the evaluation criteria of an operation evaluation knowledge base, an operation error is never overlooked. Accordingly, uniform and highly reliable operation training at definite evaluation criteria can be obtained. In addition, an error-cause analyzing device and a training policy knowledge base analyze the cause of an error inherent to each of the trainee, and it is recorded systematically independently on every trainees. Since a training policy guide device retrieves and presents an operation error and a cause of the error, there can be prepared a training policy incorporating training with respect to the operation error that each of the trainee tends to commit. (I.S.)

  12. Reactor container cooling device

    Energy Technology Data Exchange (ETDEWEB)

    Ando, Koji; Kinoshita, Shoichiro

    1995-11-10

    The device of the present invention efficiently lowers pressure and temperature in a reactor container upon occurrence of a severe accident in a BWR-type reactor and can cool the inside of the container for a long period of time. That is, (1) pipelines on the side of an exhaustion tower of a filter portion in a filter bent device of the reactor container are in communication with pipelines on the side of a steam inlet of a static container cooling device by way of horizontal pipelines, (2) a back flow check valve is disposed to horizontal pipelines, (3) a steam discharge valve for a pressure vessel is disposed closer to the reactor container than the joint portion between the pipelines on the side of the steam inlet and the horizontal pipelines. Upon occurrence of a severe accident, when the pressure vessel should be ruptured and steams containing aerosol in the reactor core should be filled in the reactor container, the inlet valve of the static container cooling device is closed. Steams are flown into the filter bent device of the reactor container, where the aerosols can be removed. (I.S.).

  13. Loose part monitoring device

    International Nuclear Information System (INIS)

    Nomura, Hiroshi.

    1992-01-01

    The device of the present invention estimates a place where loose parts occur and structural components as the loose parts in a fluid flow channel of a reactor device, to provide information thereof to a plant operator. That is, the device of the present invention comprises (1) a plurality of detectors disposed to each of equipments constituting fluid channels, (2) an abnormal sound sensing device for sensing signals from the detectors, (3) an estimation section for estimating the place where the loose parts occur and the structural components thereof based on the signals sensed by the abnormal sound sensing section, (4) a memory section for storing data of the plant structure necessary for the estimation, and (5) a display section for displaying the result of the estimation. In such a device, the position where the loose parts collide against the plant structural component and the energy thereof are estimated. The dropping path of the loose parts is estimated from the estimation position. Parts to be loose parts in the path are listed up. The parts on the list is selected based on the estimated energy thereby enabling to determine the loose parts. (I.S.)

  14. Electrical apparatus lockout device

    International Nuclear Information System (INIS)

    Gonzales, R.

    1999-01-01

    A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards

  15. Nuclear reactor monitoring device

    International Nuclear Information System (INIS)

    Mihashi, Ishi; Honma, Hitoshi.

    1993-01-01

    The monitoring device of the present invention comprises a reactor core/reactor system data measuring and controlling device, a radioactivity concentration calculation device for activated coolants for calculating a radioactivity concentration of activated coolants in a main steam and reactor water by using an appropriate physical model, a radioactivity concentration correlation and comparison device for activated coolants for comparing correlationship with a radiation dose and an abnormality alarm device. Since radioactivity of activated primary coolants is monitored at each of positions in the reactor system and occurrence of leakage and the amount thereof from a primary circuit to a secondary circuit is monitored if the reactor has secondary circuit, integrity of the reactor system can be ensured and an abnormality can be detected rapidly. Further, radioactivity concentration of activated primary circuit coolants, represented by 16 N or 15 C, is always monitored at each of positions of PWR primary circuits. When a heat transfer pipe is ruptured in a steam generator, leakage of primary circuit coolants is detected rapidly, as well as the amount of the leakage can be informed. (N.H.)

  16. Fuel inspection device

    International Nuclear Information System (INIS)

    Tsuji, Tadashi.

    1990-01-01

    The fuel inspection device of the present invention has a feature of obtaining an optimum illumination upon fuel rod interval inspection operation in a fuel pool. That is, an illumination main body used underwater is connected to a cable which is led out on a floor. A light control device is attached to the other end of the cable and an electric power cable is connected to the light control device. A light source (for example, incandescent lamp) is incorporated in the casing of the illumination main body, and a diffusion plate is disposed at the front to provide a plane light source. The light control device has a light control knob capable of remote-controlling the brightness of the light of the illumination main body. In the fuel inspection device thus constituted, halation is scarcely caused on the image screen upon inspection of fuels by a submerged type television camera to facilitate control upon inspection. Accordingly, efficiency of the fuel inspection can be improved to shorten the operation time. (I.S.)

  17. Pricing and reimbursement of drugs and medical devices in Hungary.

    Science.gov (United States)

    Gulácsi, L; Dávid, T; Dózsa, Cs

    2002-01-01

    Similarly to other countries of Central and Eastern Europe, Hungary has witnessed massive diffusion of healthcare technology such as drugs and medical devices since 1990. While substantial new pharmaceuticals, medical devices, and procedures have been liberalized, there has been no proper evaluation or training in their use. Healthcare providers have come to find themselves as entrepreneurs in private practice, while patients are acquiring an increasing awareness as customers of healthcare,demanding services in return for their taxes and contributions. This has led to extremely irrational patterns of investment in technology, with most an obvious waste of resources, while leaving basic needs unmet. Both the National Health Insurance Fund and the Ministry of Finance believe that the current pharmaceutical and medical device bill is too high. However, introducing a more transparent and flexible pricing and reimbursement framework may enable a more efficient allocation of the limited resources to be achieved.

  18. Propensity to Leave versus Probability of Leaving: The Relationship between Intrinsic and Extrinsic Satisfaction in the Voluntary Leaving Behavior of IT Professionals

    Science.gov (United States)

    King, Christopher S.

    2013-01-01

    This dissertation presents a quantitative analysis of the relationship between intrinsic and extrinsic job satisfaction and the voluntary leaving behavior of IT professionals. In addition, the study adds to the validity and reliability of the Udechukwu and Mujtaba Mathematical Turnover Model. Surveyed within the study for their intrinsic and…

  19. High-energy heavy ion testing of VLSI devices for single event ...

    Indian Academy of Sciences (India)

    Unknown

    per describes the high-energy heavy ion radiation testing of VLSI devices for single event upset (SEU) ... The experimental set up employed to produce low flux of heavy ions viz. silicon ... through which they pass, leaving behind a wake of elec- ... for use in Bus Management Unit (BMU) and bulk CMOS ... was scheduled.

  20. Developing Accessibility Design Guidelines for Wearables: Accessibility Standards for Multimodal Wearable Devices

    NARCIS (Netherlands)

    Wentzel, M.J.; Velleman, Eric M.; van der Geest, Thea; Antona, Margherita; Stephanidis, Constantine

    2016-01-01

    Smart wearable devices are integrated our everyday lives. Such wearable technology is worn on or near the body, while leaving both hands free. This enables users to receive and send information in a non-obtrusive way. Because of the ability to continuously assist and support activities, wearables

  1. Fragment capture device

    Science.gov (United States)

    Payne, Lloyd R.; Cole, David L.

    2010-03-30

    A fragment capture device for use in explosive containment. The device comprises an assembly of at least two rows of bars positioned to eliminate line-of-sight trajectories between the generation point of fragments and a surrounding containment vessel or asset. The device comprises an array of at least two rows of bars, wherein each row is staggered with respect to the adjacent row, and wherein a lateral dimension of each bar and a relative position of each bar in combination provides blockage of a straight-line passage of a solid fragment through the adjacent rows of bars, wherein a generation point of the solid fragment is located within a cavity at least partially enclosed by the array of bars.

  2. Coating thickness measuring device

    International Nuclear Information System (INIS)

    Joffe, B.B.; Sawyer, B.E.; Spongr, J.J.

    1984-01-01

    A device especially adapted for measuring the thickness of coatings on small, complexly-shaped parts, such as, for example, electronic connectors, electronic contacts, or the like. The device includes a source of beta radiation and a radiation detector whereby backscatter of the radiation from the coated part can be detected and the thickness of the coating ascertained. The radiation source and detector are positioned in overlying relationship to the coated part and a microscope is provided to accurately position the device with respect to the part. Means are provided to control the rate of descent of the radiation source and radiation detector from its suspended position to its operating position and the resulting impact it makes with the coated part to thereby promote uniformity of readings from operator to operator, and also to avoid excessive impact with the part, thereby improving accuracy of measurement and eliminating damage to the parts

  3. Nonimaging radiant energy device

    Science.gov (United States)

    Winston, Roland; Ning, Xiaohui

    1993-01-01

    A nonimaging radiant energy device may include a hyperbolically shaped reflective element with a radiant energy inlet and a radiant energy outlet. A convex lens is provided at the radiant energy inlet and a concave lens is provided at the radiant energy outlet. Due to the provision of the lenses and the shape of the walls of the reflective element, the radiant energy incident at the radiant energy inlet within a predetermined angle of acceptance is emitted from the radiant energy outlet exclusively within an acute exit angle. In another embodiment, the radiant energy device may include two interconnected hyperbolically shaped reflective elements with a respective convex lens being provided at each aperture of the device.

  4. Endoscopic Devices for Obesity.

    Science.gov (United States)

    Sampath, Kartik; Dinani, Amreen M; Rothstein, Richard I

    2016-06-01

    The obesity epidemic, recognized by the World Health Organization in 1997, refers to the rising incidence of obesity worldwide. Lifestyle modification and pharmacotherapy are often ineffective long-term solutions; bariatric surgery remains the gold standard for long-term obesity weight loss. Despite the reported benefits, it has been estimated that only 1% of obese patients will undergo surgery. Endoscopic treatment for obesity represents a potential cost-effective, accessible, minimally invasive procedure that can function as a bridge or alternative intervention to bariatric surgery. We review the current endoscopic bariatric devices including space occupying devices, endoscopic gastroplasty, aspiration technology, post-bariatric surgery endoscopic revision, and obesity-related NOTES procedures. Given the diverse devices already FDA approved and in development, we discuss the future directions of endoscopic therapies for obesity.

  5. Radioactive gas storage device

    International Nuclear Information System (INIS)

    Sano, Yuji.

    1988-01-01

    Purpose: To easily and reliably detect the consumption of a sputtered cathode in a radioactive gas storage device using ion injection method. Constitution: Inert gases are sealed to the inside of a cathode. As the device is operated, the cathode is consumed and, if it is scraped to some extent, inert gases in the cathode gases are blown out to increase the inner pressure of the device. The pressure elevation is detected by a pressure detector connected with a gas introduction pipe or discharge pipe. Further, since the discharge current in the inside is increased along with the elevation of the pressure, it is possible to detect the increase of the electrical current. In this way, the consumption of the cathode can be recognized by detecting the elevation in the pressure or increase in the current. (Ikeda, J.)

  6. ALS insertion devices

    International Nuclear Information System (INIS)

    Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W.V.; Humphries, D.; Kincaid, B.; Lancaster, H.; Plate, D.

    1990-11-01

    The Advanced Light Source (ALS), the first US third generation synchrotron radiation source, is currently under construction at the Lawrence Berkeley Laboratory. The low-emittance, 1.5 GeV electron storage ring and the insertion devices are specifically designed to produce high brightness beams in the UV to soft X-Ray range. The planned initial complement of insertion devices includes four 4.6 m long undulators, with period lengths of 3.9 cm, 5.0 cm (2) and 8.0 cm, and a 2.9 m long wiggler of 16 cm period length. Undulator design is well advanced and fabrication has begun on the 5.0 cm and 8.0 cm period length undulators. This paper discusses ALS insertion device requirements; general design philosophy; and design of the magnetic structure, support structure/drive systems, control system and vacuum system. 18 refs., 9 figs., 5 tabs

  7. Steam cleaning device

    International Nuclear Information System (INIS)

    Karaki, Mikio; Muraoka, Shoichi.

    1985-01-01

    Purpose: To clean complicated and long objects to be cleaned having a structure like that of nuclear reactor fuel assembly. Constitution: Steams are blown from the bottom of a fuel assembly and soon condensated initially at the bottom of a vertical water tank due to water filled therein. Then, since water in the tank is warmed nearly to the saturation temperature, purified water is supplied from a injection device below to the injection device above the water tank on every device. In this way, since purified water is sprayed successively from below to above and steams are condensated in each of the places, the entire fuel assembly elongated in the vertical direction can be cleaned completely. Water in the reservoir goes upward like the steam flow and is drained together with the eliminated contaminations through an overflow pipe. After the cleaning has been completed, a main steam valve is closed and the drain valve is opened to drain water. (Kawakami, Y.)

  8. Laser device and method

    International Nuclear Information System (INIS)

    Myers, J.D.

    1986-01-01

    A method is described of treatment of opacity of the lens of an eye resulting from foreign matter at the back surface of the eye lens within the vitreous fluid body of the eye with a passively Q-switched laser device. The method consists of: (a) generating a single lasing pulse emitted from the laser device focused within the eye vitreous fluid body, spaced from the lens back surface, creating a microplasma dot in the vitreous fluid body (b) then increasing the frequency of the lasing pulses emitted from the lasing device having a frequency greater than the life of the microplasma to generate an elongated lasing plasma within the eye vitreous fluid moving toward the lens back surface, until the elongated lasing plasma contacts and destroys the foreign matter

  9. Meniscal repair devices.

    Science.gov (United States)

    Barber, F A; Herbert, M A

    2000-09-01

    Meniscal repair devices not requiring accessory incisions are attractive. Many factors contribute to their clinical effectiveness including their biomechanical characteristics. This study compared several new meniscal repair devices with standard meniscal suture techniques. Using a porcine model, axis-of-insertion loads were applied to various meniscal sutures and repair devices. A single device or stitch was placed in a created meniscal tear and a load applied. Both loads and modes of failure were recorded. The load-to-failure data show stratification into 4 distinct statistical groups. Group A, 113 N for a double vertical stitch; group B, 80 N for a single vertical stitch; group C, 57 N for the BioStinger, 56 N for a horizontal mattress stitch, and 50 N for the T-Fix stitch; and group D, 33 N for the Meniscus Arrow (inserted by hand or gun), 32 N for the Clearfix screw, 31 N for the SDsorb staple, 30 N for the Mitek meniscal repair system, and 27 N for the Biomet staple. The failure mechanism varied. Sutures broke away from the knot. The Meniscus Arrow and BioStinger pulled through the inner rim with the crossbar intact. The Clearfix screw failed by multiple mechanisms, whereas 1 leg of the SDsorb staple always pulled out of the outer rim. The Mitek device usually failed by pullout from the inner rim. The Biomet staple always broke at the crosshead or just below it. Although the surgeon should be aware of the material properties of the repair technique chosen for a meniscal repair, this information is only an indication of device performance and may not correlate with clinical healing results.

  10. Sun and Shade leaves, SIF, and Photosynthetic Capacity

    Science.gov (United States)

    Berry, J. A.; Badgley, G.

    2016-12-01

    Recent advances in retrieval of solar induced chlorophyll fluorescence (SIF) have opened up new possibilities for remote sensing of canopy physiology and structure. To date most of the emphasis has been placed on SIF as an indicator of stress and photosynthetic capacity. However, it is clear that canopy structure can also have an influence. To this point, simulations of SIF in land surface models tend to under predict observed variation in SIF. Also, large, systematic differences in SIF from different canopy types seem to correlate well with the photosynthetic capacity of these canopies. SIF emissions from pampered crops can be several-fold that from evergreen, needle-leaf forests. Yet, these may have similar vegetation indices and absorb a similar fraction of incident PAR. SIF photons produced in a conifer canopy do have a lower probability of escaping its dense, clumped foliage. However, this does not explain the correlated differences in photosynthetic rate and SIF. It is useful, in this regard, to consider the separate contributions of sun and shade leaves to the SIF emitted by a canopy. Sun leaves tend to be displayed to intercept the direct solar beam, and these highly illuminated leaves are often visible from above the canopy. Sun leaves produce more SIF and a large fraction of it escapes. Therefore, the intensity of SIF may be a sensitive indicator of the partitioning of absorbed PAR to sun and shade leaves. Many models account tor the different photosynthetic capacity of sun and shade leaves in calculating canopy responses. However, the fraction of leaves in each category is usually parameterized by an assumed leaf angle distribution (e.g. spherical). In reality, the sun/shade fraction can vary over a wide range, and it has been difficult to measure. SIF and possibly near-IR reflectance of canopies can be used to specify this key parameter with obvious importance to understanding photosynthetic rate.

  11. GPs' negotiation strategies regarding sick leave for subjective health complaints.

    Science.gov (United States)

    Nilsen, Stein; Malterud, Kirsti; Werner, Erik L; Maeland, Silje; Magnussen, Liv Heide

    2015-03-01

    To explore general practitioners' (GPs') specific negotiation strategies regarding sick-leave issues with patients suffering from subjective health complaints. Focus-group study. Nine focus-group interviews in three cities in different regions of Norway. 48 GPs (31 men, 17 women; age 32-65), participating in a course dealing with diagnostic practice and assessment of sickness certificates related to patients with subjective health complaints. The GPs identified some specific strategies that they claimed to apply when dealing with the question of sick leave for patients with subjective health complaints. The first step would be to build an alliance with the patient by complying with the wish for sick leave, and at the same time searching for information to acquire the patient's perspective. This position would become the basis for the main goal: motivating the patient for a rapid return to work by pointing out the positive effects of staying at work, making legal and moral arguments, and warning against long-term sick leave. Additional solutions might also be applied, such as involving other stakeholders in this process to provide alternatives to sick leave. GPs seem to have a conscious approach to negotiations of sickness certification, as they report applying specific strategies to limit the duration of sick leave due to subjective health complaints. This give-and-take way of handling sick-leave negotiations has been suggested by others to enhance return to work, and should be further encouraged. However, specific effectiveness of this strategy is yet to be proven, and further investigation into the actual dealings between doctor and patients in these complex encounters is needed.

  12. Satisfaction of women urologists with maternity leave and childbirth timing.

    Science.gov (United States)

    Lerner, Lori B; Baltrushes, Robin J; Stolzmann, Kelly L; Garshick, Eric

    2010-01-01

    Women physicians must consider many conflicting issues when timing childbirth. We characterized maternity leave, breast-feeding practices and satisfaction associated with pregnancy timing in women urologists. A 114-item anonymous survey including questions on maternity leave duration for firstborn children, workplace policies, attitudes and satisfaction was mailed to all 365 American board certified women urologists in May and July 2007. Logistic regression was used to identify factors associated with greater satisfaction. A total of 243 women urologists (69%) responded, of whom 158 had at least 1 biological child. Average maternal age at first birth was 32.6 years. Of the children 10%, 32% and 52% were born before, during and after residency, respectively. Only 42% of women reported the existence of a formal maternity leave policy. Of the women 70% took 8 weeks or less of leave. Those with 9 weeks or greater were 3.8 times more likely to report satisfaction (p = 0.001). Although women in practice were 2.0 times more likely to take 9 weeks or greater compared to those in training or earlier (p = 0.046), only 30% in practice took this much time. Dissatisfaction with leave was not related to birth timing (residency vs practice) or maternal age at delivery but to work/residency related issues in 69% of respondents, financial concerns in 13% and personal/other in 18%. For breast-feeding 67% of respondents were satisfied with the duration and 22% were not. Dissatisfaction was secondary to work factors. Satisfaction with leave was related to the amount of maternity leave with women with 9 weeks or greater more likely to report satisfaction. Women in practice were more likely to take 9 weeks or greater but most did not due to strong stressors related to work, partners/peers or finances. Work factors were cited for dissatisfaction with breast-feeding.

  13. Asphaltene based photovoltaic devices

    Science.gov (United States)

    Chianelli, Russell R.; Castillo, Karina; Gupta, Vipin; Qudah, Ali M.; Torres, Brenda; Abujnah, Rajib E.

    2016-03-22

    Photovoltaic devices and methods of making the same, are disclosed herein. The cell comprises a photovoltaic device that comprises a first electrically conductive layer comprising a photo-sensitized electrode; at least one photoelectrochemical layer comprising metal-oxide particles, an electrolyte solution comprising at least one asphaltene fraction, wherein the metal-oxide particles are optionally dispersed in a surfactant; and a second electrically conductive layer comprising a counter-electrode, wherein the second electrically conductive layer comprises one or more conductive elements comprising carbon, graphite, soot, carbon allotropes or any combinations thereof.

  14. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1968-01-01

    Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

  15. INLET STRATIFICATION DEVICE

    DEFF Research Database (Denmark)

    2006-01-01

    An inlet stratification device (5) for a circuit circulating a fluid through a tank (1 ) and for providing and maintaining stratification of the fluid in the tank (1 ). The stratification de- vice (5) is arranged vertically in the tank (1) and comprises an inlet pipe (6) being at least partially...... formed of a flexible porous material and having an inlet (19) and outlets formed of the pores of the porous material. The stratification device (5) further comprises at least one outer pipe (7) surrounding the inlet pipe (6) in spaced relationship thereto and being at least partially formed of a porous...

  16. Precision alignment device

    Science.gov (United States)

    Jones, N.E.

    1988-03-10

    Apparatus for providing automatic alignment of beam devices having an associated structure for directing, collimating, focusing, reflecting, or otherwise modifying the main beam. A reference laser is attached to the structure enclosing the main beam producing apparatus and produces a reference beam substantially parallel to the main beam. Detector modules containing optical switching devices and optical detectors are positioned in the path of the reference beam and are effective to produce an electrical output indicative of the alignment of the main beam. This electrical output drives servomotor operated adjustment screws to adjust the position of elements of the structure associated with the main beam to maintain alignment of the main beam. 5 figs.

  17. Microfluidic Cell Culture Device

    Science.gov (United States)

    Takayama, Shuichi (Inventor); Cabrera, Lourdes Marcella (Inventor); Heo, Yun Seok (Inventor); Smith, Gary Daniel (Inventor)

    2014-01-01

    Microfluidic devices for cell culturing and methods for using the same are disclosed. One device includes a substrate and membrane. The substrate includes a reservoir in fluid communication with a passage. A bio-compatible fluid may be added to the reservoir and passage. The reservoir is configured to receive and retain at least a portion of a cell mass. The membrane acts as a barrier to evaporation of the bio-compatible fluid from the passage. A cover fluid may be added to cover the bio-compatible fluid to prevent evaporation of the bio-compatible fluid.

  18. Pipe closing device

    International Nuclear Information System (INIS)

    Klahn, F.C.; Nolan, J.H.; Wills, C.

    1979-01-01

    The closing device closes the upper end of a support tube for monitoring samples. It meshes with the upper connecting piece of the monitorung sample capsule, and loads the capsule within the bore of the support tube, so that it is fixed but can be released. The closing device consists of an interlocking component with a chamber and several ratchets which hang down. The interlocking component surrounds the actuating component for positioning the ratchets. The interlocking and actuating components are movable axially relative to each other. (DG) [de

  19. Preventing medical device recalls

    CERN Document Server

    Raheja, Dev

    2014-01-01

    Introduction to Medical Device RequirementsIntroductionThe ChallengesSources of ErrorsUnderstanding the Science of Safety     Overview of FDA Quality System Regulation     Overview of Risk Management Standard ISO 14971     Overview of FDA Device Approval Process     Overview of Regulatory Requirements for Clinical TrialsSummaryReferencesPreventing Recalls during Specification WritingIntroductionConduct Requirements Analysis to Identify Missing RequirementsSpecifications for Safety, Durability, and

  20. Simulation of semiconductor devices

    International Nuclear Information System (INIS)

    Oriato, D.

    2001-09-01

    In this thesis a drift diffusion model coupled with self-consistent solutions of Poisson's and Schroedinger's equations, is developed and used to investigate the operation of Gunn diodes and GaN-based LEDs. The model also includes parameters derived from Monte Carlo calculations of the simulated devices. In this way the characteristics of a Monte Carlo approach and of a quantum solver are built into a fast and flexible drift-diffusion model that can be used for testing a large number of heterostructure designs in a time-effective way. The full model and its numerical implementation are described in chapter 2. In chapter 3 the theory of Gunn diodes is presented. A basic model of the dynamics of domain formation and domain transport is described with particular regard to accumulation and dipole domains. Several modes of operation of the Gunn device are described, varying from the resonance mode to the quenched mode. Details about transferred electron devices and negative differential resistance in semiconductor materials are given. In chapter 4 results from the simulation of a simple conventional gunn device confirm the importance of the doping condition at the cathode. Accumulation or dipole domains are achieved respectively with high and low doping densities. The limits of a conventional Gunn diode are explained and solved by introducing the heterostructure Gunn diode. This new design consists of a conventional GaAs transit region coupled with an electron launcher at the cathode, made using an AIGaAs heterostructure step. Simulations show the importance of the insertion of a thin highly-doped layer between the transit region and the electron launcher in order to improve device operation. Chapter 5 is an introduction to Ill-nitrides, in particular GaN and its alloy ln-GaN. We outline the discrepancy in the elastic and piezoelectric parameters found in the literature. Strain, dislocations and piezoelectricity are presented as the main features of a InGaN/GaN system

  1. Nanoscale memory devices

    International Nuclear Information System (INIS)

    Chung, Andy; Deen, Jamal; Lee, Jeong-Soo; Meyyappan, M

    2010-01-01

    This article reviews the current status and future prospects for the use of nanomaterials and devices in memory technology. First, the status and continuing scaling trends of the flash memory are discussed. Then, a detailed discussion on technologies trying to replace flash in the near-term is provided. This includes phase change random access memory, Fe random access memory and magnetic random access memory. The long-term nanotechnology prospects for memory devices include carbon-nanotube-based memory, molecular electronics and memristors based on resistive materials such as TiO 2 . (topical review)

  2. Radiographic film digitizing devices

    International Nuclear Information System (INIS)

    McFee, W.H.

    1988-01-01

    Until recently, all film digitizing devices for use with teleradiology or picture archiving and communication systems used a video camera to capture an image of the radiograph for subsequent digitization. The development of film digitizers that use a laser beam to scan the film represents a significant advancement in digital technology, resulting in improved image quality compared with video scanners. This paper discusses differences in resolution, efficiency, reliability, and the cost between these two types of devices. The results of a modified receiver operating characteristic comparison study of a video scanner and a laser scanner manufactured by the same company are also discussed

  3. Device for removing fur

    International Nuclear Information System (INIS)

    Hanawa, Minoru; Nakagawa, Takao; Sakuma, Toyoo; Yonemura, Eizo.

    1976-01-01

    Purpose: To effectively remove fur adhered to fuel rods and to increase working efficiency without use of a lengthy hose. Constitution: In the fur removing device of the present invention, brushes rotated by gears are provided within a casing so that fur adhered to the fuel rods are removed by the brushes and water is rotatably moved by blades housed therein to outwardly blow fur floating in water by means of a centrifugal force. Then, the fur is filtered by a filter outwardly provided. In this way, the fur may be collected within the device to avoid contamination to others. (Kamimura, M.)

  4. Device-Centric Monitoring for Mobile Device Management

    OpenAIRE

    Chircop, Luke; Colombo, Christian; Pace, Gordon J.

    2016-01-01

    The ubiquity of computing devices has led to an increased need to ensure not only that the applications deployed on them are correct with respect to their specifications, but also that the devices are used in an appropriate manner, especially in situations where the device is provided by a party other than the actual user. Much work which has been done on runtime verification for mobile devices and operating systems is mostly application-centric, resulting in global, device-centri...

  5. Abscisic acid biosynthesis in leaves and roots of Xanthium strumarium

    Energy Technology Data Exchange (ETDEWEB)

    Creelman, R.A.; Gage, D.A.; Stults, J.T.; Zeevaart, J.A.D.

    1987-11-01

    Research on the biosynthesis of abscisic acid (ABA) has focused primarily on two pathways: (a) the direct pathway from farnesyl pyrophosphate, and (b) the indirect pathway involving a carotenoid precursor. The authors have investigated which biosynthetic pathway is operating in turgid and stressed Xanthium leaves, and in stressed Xanthium roots using long-term incubations in /sup 18/O/sub 2/. It was found that in stressed leaves three atoms of /sup 18/O from /sup 18/O/sub 2/ are incorporated into the ABA molecule, and that the amount of /sup 18/O incorporated increases with time. One /sup 18/O atom is incorporated rapidly into the carboxyl group of ABA, whereas the other two atoms are very slowly incorporated into the ring oxygens. The fourth oxygen atom in the carboxyl group of ABA is derived from water. ABA from stressed roots of Xanthium incubated in /sup 18/O/sub 2/ shows a labeling pattern similar to that of ABA in stressed leaves, but with incorporation of more /sup 18/O into the tertiary hydroxyl group at C-1' after 6 and 12 hours than found in ABA from stressed leaves. It is proposed that the precursors to stress-induced ABA are xanthophylls, and that a xanthophyll lacking an oxygen function at C-6 plays a crucial role in ABA biosynthesis in Xanthium roots. In turgid Xanthium leaves, /sup 18/O is incorporated into ABA to a much lesser extent that it is in stressed leaves, whereas exogenously applied /sup 14/C-ABA is completely catabolized within 48 hours. This suggests that ABA in turgid leaves is either (a) made via a biosynthetic pathway which is different from the one in stressed leaves, or (b) has a half-life on the order of days as compared with a half-life of 15.5 hours in water-stressed Xanthium leaves. Phaseic acid showed a labeling pattern similar to that of ABA, but with an additional /sup 18/O incorporated during 8'-hydroxylation of ABA to phaseic acid.

  6. Materials for electrochemical device safety

    Science.gov (United States)

    Vissers, Daniel R.; Amine, Khalil; Thackeray, Michael M.; Kahaian, Arthur J.; Johnson, Christopher S.

    2015-04-07

    An electrochemical device includes a thermally-triggered intumescent material or a gas-triggered intumescent material. Such devices prevent or minimize short circuits in a device that could lead to thermal run-away. Such devices may include batteries or supercapacitors.

  7. Endophytic fungi from leaves of Centella asiatica: occurrence and potential interactions within leaves.

    Science.gov (United States)

    Rakotoniriana, E F; Munaut, F; Decock, C; Randriamampionona, D; Andriambololoniaina, M; Rakotomalala, T; Rakotonirina, E J; Rabemanantsoa, C; Cheuk, K; Ratsimamanga, S U; Mahillon, J; El-Jaziri, M; Quetin-Leclercq, J; Corbisier, A M

    2008-01-01

    Fungal endophytes were isolated from leaves of Centella asiatica (Apiaceae) collected at Mangoro (middle eastern region of Madagascar, 200 km from Antananarivo). Forty- five different taxa were recovered. The overall foliar colonization rate was 78%. The most common endophytes were the non-sporulating species 1 (isolation frequency IF 19.2%) followed by Colletotrichum sp.1 (IF 13.2%), Guignardia sp. (IF 8.5%), Glomerella sp. (IF 7.7%), an unidentified ascomycete (IF 7.2%), the non-sporulating species 2 (IF 3.7%) and Phialophora sp. (IF 3.5%). Using sequences of the ribosomal DNA internal transcribed spacer (ITS) regions, major endophytes (IF > 7%) were identified as xylariaceous taxa or as Colletotrichum higginsianum, Guignardia mangiferae and Glomerella cingulata. Results from in vitro fungal disk experiments showed a strong inhibitory activity of the xylariaceous non-sporulating species 1 against G. mangiferae and C. higginsianum and of C. higginsianum against G. mangiferae. This can be explained by antagonism between dominant taxa.

  8. [Origin of sennosides in health teas including Malva leaves].

    Science.gov (United States)

    Kojima, T; Kishi, M; Sekita, S; Satake, M

    2001-06-01

    The aim of this study is to clarify whether sennosides are contained in the leaf of Malva verticillata L., and then to clarify the source of sennosides in health teas including malva leaves. The identification and determination of sennosides were performed with thin layer chromatography and high performance liquid chromatography. The leaf of Malva verticillata L. did not contain sennosides A or B and could be easily distinguished from senna leaf. Our previous report showed that sennosides are contained in weight-reducing herbal teas including malva leaves, and that senna leaf is a herbal component in some teas. Furthermore, in 10 samples of health tea including malva leaves that were bought last year, the smallest amount of sennosides was 6.1 mg/bag, and all health teas including malva leaves contained the leaf and midrib of senna. We suggest that sennosides A and B are not contained in the leaf of Malva verticillata L., and that the sennosides in health teas including malva leaves are not derived from malva leaf but from senna leaf.

  9. Diversity of fungi colonizing leaves of Rhododendron (Rhododendron L. cuttings

    Directory of Open Access Journals (Sweden)

    Barbara Kierpiec-Baran

    2014-04-01

    Full Text Available Rhododendrons (Rhododendron L. are shrubs whose attractiveness is determined by their multi-coloured flowers and evergreen leaves. Necroses visible on the leaves of rhododendron cuttings diminish the suitability of nursery material for marketing. These symptoms are most frequently caused by fungi. The investigations were conducted in 2010–2011 in an ornamental shrub nursery to identify fungi colonizing the phyllosphere of rhododendron cuttings and causing leaf necroses. The material for analysis consisted of leaves of 11 rhododendron cultivars. 550 leaves were collected from 110 half-year-old cuttings for mycological analysis. Over 350 fungal colonies belonging to 15 species were isolated from the leaves of rhododendron cuttings. The dominants included: Pestalotiopsis sydowiana, Trichoderma koningii and Alternaria alternata. The influents included: Aspergillus brasiliensis, Mucor hiemalis f. hiemalis, Epicoccum nigrum, Sordaria fimicola and Umbelopsis isabellina. A large majority of the fungi preferred the phyllosphere environment of Yakushima rhododendron (R. yakushimanum cultivars ‘Sneezy’ and ‘Golden Torch’ as well as of the large-flowered cultivars ‘Flautando’, ‘Dominik’, and ‘Simona’. The phyllosphere of the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, and ‘Goldbuckett’ was a reservoir for many fungal colonies and fungi species. The cultivars less susceptible to colonization by fungi and the most promising for planting in green areas and home gardens are the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, ‘Goldbuckett’, ‘Rasputin’, and ‘Roseum Elegans’.

  10. Fathers’ Leave and Fathers’ Involvement: Evidence from Four OECD Countries

    Science.gov (United States)

    Huerta, Maria C.; Adema, Willem; Baxter, Jennifer; Han, Wen-Jui; Lausten, Mette; Lee, RaeHyuck; Waldfogel, Jane

    2016-01-01

    In recent years, several OECD countries have taken steps to promote policies encouraging fathers to spend more time caring for young children, thereby promoting a more gender equal division of care work. Evidence, mainly for the United States and United Kingdom, has shown fathers taking some time off work around childbirth are more likely to be involved in childcare related activities than fathers who do not take time off. This paper conducts a first cross-national analysis on the association between fathers’ leave taking and fathers’ involvement when children are young. It uses birth cohort data of children born around 2000 from four OECD countries: Australia, Denmark, the United Kingdom and the United States. Results show that the majority of fathers take time off around childbirth independent of the leave policies in place. In all countries, except Denmark, important socio-economic differences between fathers who take leave and those who do not are observed. In addition, fathers who take leave, especially those taking two weeks or more, are more likely to carry out childcare related activities when children are young. This study adds to the evidence that suggests that parental leave for fathers is positively associated with subsequent paternal involvement. PMID:28479865

  11. Paternity leave in Sweden: costs, savings and health gains.

    Science.gov (United States)

    Månsdotter, Anna; Lindholm, Lars; Winkvist, Anna

    2007-06-01

    The initial objective is to examine the relationship between paternity leave in 1978-1979 and male mortality during 1981-2001, and the second objective is to calculate the cost-effectiveness of the 1974 parental insurance reform in Sweden. Based on a population of all Swedish couples who had their first child together in 1978 (45,801 males), the risk of death for men who took paternity leave, compared with men who did not, was estimated by odds ratios. The cost-effectiveness analysis considered costs for information, administration and production losses, minus savings due to decreased sickness leave and inpatient care, compared to health gains in life-years and quality-adjusted life-years (QALYs). It is demonstrated that fathers who took paternity leave have a statistically significant decreased death risk of 16%. Costs minus savings (discounted values) stretch from a net cost of EUR 19 million to a net saving of EUR 11 million, and the base case cost-effectiveness is EUR 8000 per QALY. The study indicates that that the right to paternity leave is a desirable reform based on commonly stated public health, economic, and feminist goals. The critical issue in future research should be to examine impact from health-related selection.

  12. The Effect of Paid Leave on Maternal Mental Health.

    Science.gov (United States)

    Mandal, Bidisha

    2018-06-07

    Objectives I examined the relationship between paid maternity leave and maternal mental health among women returning to work within 12 weeks of childbirth, after 12 weeks, and those returning specifically to full-time work within 12 weeks of giving birth. Methods I used data from 3850 women who worked full-time before childbirth from the Early Childhood Longitudinal Study-Birth Cohort. I utilized propensity score matching techniques to address selection bias. Mental health was measured using the Center for Epidemiologic Studies Depression (CESD) scale, with high scores indicating greater depressive symptoms. Results Returning to work after giving birth provided psychological benefits to women who used to work full-time before childbirth. The average CESD score of women who returned to work was 0.15 standard deviation (p leave, on the other hand, was associated with adverse effects on mental health. The average CESD score of women who returned within 12 weeks of giving birth was 0.13 standard deviation higher (p leave was associated with an improved mental health outcome. Among all women who returned to work within 12 weeks of childbirth, those women who received some paid leave had a 0.17 standard deviation (p leave.

  13. Parental leave policies in graduate medical education: A systematic review.

    Science.gov (United States)

    Humphries, Laura S; Lyon, Sarah; Garza, Rebecca; Butz, Daniel R; Lemelman, Benjamin; Park, Julie E

    2017-10-01

    A thorough understanding of attitudes toward and program policies for parenthood in graduate medical education (GME) is essential for establishing fair and achievable parental leave policies and fostering a culture of support for trainees during GME. A systematic review of the literature was completed. Non-cohort studies, studies completed or published outside of the United States, and studies not published in English were excluded. Studies that addressed the existence of parental leave policies in GME were identified and were the focus of this study. Twenty-eight studies addressed the topic of the existence of formal parental leave policies in GME, which was found to vary across time and ranged between 22 and 90%. Support for such policies persisted across time. Attention to formal leave policies in GME has traditionally been lacking, but may be increasing. Negative attitudes towards parenthood in GME persist. Active awareness of the challenges faced by parent-trainees combined with formal parental leave policy implementation is important in supporting parenthood in GME. Copyright © 2017. Published by Elsevier Inc.

  14. Oxalate Content of Taro Leaves Grown in Central Vietnam

    Science.gov (United States)

    Du Thanh, Hang; Phan Vu, Hai; Vu Van, Hai; Le Duc, Ngoan; Le Minh, Tuan; Savage, Geoffrey

    2017-01-01

    Leaves were harvested from four different cultivars of Colocasia esculenta and three cultivars of Alocasia odora that were growing on nine different farms in central Vietnam. The total, soluble and insoluble oxalate contents of the leaves were extracted and measured using HPLC chromatography. Total calcium determinations were also carried out on the same samples. The total oxalate content of the leaves ranged from 433.8 to 856.1 mg/100 g wet matter (WM) while the soluble oxalate ranged from 147.8 to 339.7 mg/100 g WM. The proportion of soluble oxalate ranged from 28% to 41% (overall mean 35%) of the total oxalate content of the leaves. The equivalent insoluble oxalate proportion ranged from 59% to 72% of the total (overall mean 65%). There was little difference between the Colocasia esculenta and Alocasia odora taro cultivars, although the total oxalate content was significantly higher in Alocasia odora cultivars. The overall mean total calcium content was 279.5 mg/100 WM and the percentage of insoluble calcium bound as calcium oxalate ranged from 31.7% to 57.3% of the total calcium content (overall mean 47.1%). The oxalate content in taro leaves is a major factor to consider when different cultivars of taro are recommended for human or animal consumption. PMID:28231080

  15. Oxalate Content of Taro Leaves Grown in Central Vietnam

    Directory of Open Access Journals (Sweden)

    Hang Du Thanh

    2017-01-01

    Full Text Available Leaves were harvested from four different cultivars of Colocasia esculenta and three cultivars of Alocasia odora that were growing on nine different farms in central Vietnam. The total, soluble and insoluble oxalate contents of the leaves were extracted and measured using HPLC chromatography. Total calcium determinations were also carried out on the same samples. The total oxalate content of the leaves ranged from 433.8 to 856.1 mg/100 g wet matter (WM while the soluble oxalate ranged from 147.8 to 339.7 mg/100 g WM. The proportion of soluble oxalate ranged from 28% to 41% (overall mean 35% of the total oxalate content of the leaves. The equivalent insoluble oxalate proportion ranged from 59% to 72% of the total (overall mean 65%. There was little difference between the Colocasia esculenta and Alocasia odora taro cultivars, although the total oxalate content was significantly higher in Alocasia odora cultivars. The overall mean total calcium content was 279.5 mg/100 WM and the percentage of insoluble calcium bound as calcium oxalate ranged from 31.7% to 57.3% of the total calcium content (overall mean 47.1%. The oxalate content in taro leaves is a major factor to consider when different cultivars of taro are recommended for human or animal consumption.

  16. Adsorption Behavior of Uranium and Mechanism Analysis on Banyan Leaves

    International Nuclear Information System (INIS)

    Xia Liangshu; Tan Kaixuan; Wang Xiao; Zheng Weina

    2010-01-01

    The adsorption behavior of uranium on banyan leaves was studied with static experiments. The adsorption process was analyzed in terms of thermodynamics and kinetics, and the adsorption mechanism was analyzed with FTIR and SEM. In the studied condition, the equilibrium adsorption data fit to Freundlich isotherms, with a relation coefficient greater than 0.99. The adsorption of uranium on banyan leaves is an endothermic process. Kinetic analysis shows that the adsorption rate is mainly controlled by surface adsorption. The process of adsorption can be described by an equation of Pseudo 2nd-order model. The calculation data are in good agreement with the experimental data,and the relation coefficient is 0.9998. The thermodynamic data indicate that the synergistic uranium biosorption by banyan leaves is a spontaneous and endothermal adsorption process. The adsorption of uranium on banyan leaves changes the cell's surface form of banyan leaves.In the adsorption process, UO 2 2+ mainly chelates with -OH,C=O,P-O and Si=O etc. on the cell's surface and forms the complexes. The adsorption of uranium should be of surface coordination. (authors)

  17. Device configuration-management system

    International Nuclear Information System (INIS)

    Nowell, D.M.

    1981-01-01

    The Fusion Chamber System, a major component of the Magnetic Fusion Test Facility, contains several hundred devices which report status to the Supervisory Control and Diagnostic System for control and monitoring purposes. To manage the large number of diversity of devices represented, a device configuration management system was required and developed. Key components of this software tool include the MFTF Data Base; a configuration editor; and a tree structure defining the relationships between the subsystem devices. This paper will describe how the configuration system easily accomodates recognizing new devices, restructuring existing devices, and modifying device profile information

  18. Radioactive gas storage device

    International Nuclear Information System (INIS)

    Seki, Eiji; Kobayashi, Yoshihiro.

    1989-01-01

    The present invention concerns a device of ionizing radioactive gases to be processed in gaseous nuclear fission products in nuclear fuel reprocessing plants, etc., and injecting them into metal substrates for storage. The device comprises a vessel for a tightly closed type outer electrode in which gases to be processed are introduced, an electrode disposed to the inside of the vessel and the target material, a high DC voltage power source for applying high voltage to the electrodes, etc. There are disposed a first electric discharging portion for preparting discharge plasma for ion injection of different electrode distance and a second electric discharging portion for causing stable discharge between the vessel and the electrode. The first electric discharging portion for the ion injection provides an electrode distance suitable to acceleration sputtering and the second electric discharging portion is used for stable discharge. Accordingly, if the gas pressure in the radioactive gas storage device is reduced by the external disturbance, etc., since the second electric discharging portion satisfies the electric discharging conditions, the device can continue electric discharge. (K.M.)

  19. Nano devices and sensors

    CERN Document Server

    Liaw, Shien-Kuei; Chung, Yung-Hui

    2016-01-01

    This volume on semiconductor devices focuses on such topics as nano-imprinting, lithography, nanowire charge-trapping, thermo-stability in nanowires, nano-electrodes, and voltage and materials used for fabricating and improving electrical characteristics of nano-materials.

  20. Integrated Optical lightguide device

    NARCIS (Netherlands)

    Heideman, Rene; Lambeck, Paul; Veldhuis, G.J.

    2005-01-01

    In an integrated optical lightguide device including a light-transmitting core layer, an inclusion or buffer layer, and an active or cladding layer. The cladding layer is divided into segments. Groups of different segments exhibit different refractive indices, light intensity profiles or different

  1. Integrated Optical lightguide device

    NARCIS (Netherlands)

    Heideman, Rene; Lambeck, Paul; Veldhuis, G.J.

    2000-01-01

    In an integrated optical lightguide device including a light-transmitting core layer, an inclusion or buffer layer, and an active or cladding layer. The cladding layer is divided into segments. Groups of different segments exhibit different refractive indices, light intensity profiles or different

  2. Criticality alarm device

    International Nuclear Information System (INIS)

    Kasai, Kenji.

    1994-01-01

    The device of the present invention is utilized, for example, to a reprocessing facility for storing and processing nuclear fuels and measures and controls the nuclear fuel assembly system so as not to exceed criticality. That is, a conventional criticality alarm device applies a predetermined processing to neutron fluxes generated from a nuclear fuel assembly system containing nuclear fuels and outputs an alarm. The device of the present invention comprises (1) a neutron flux supply source for increasing and decreasing neutron fluxes periodically and supplying them to nuclear fuel assemblies, (2) a detector for detecting neutron fluxes in the nuclear fuel assemblies, (3) a critical state judging section for judging the critical state of the nuclear fuel assemblies based on the periodically changing signals obtained from the detector (2) and (4) an alarm section for outputting criticality alarms depending on the result of the judgement. The device of the present invention can accurately recognize the critical state of the nuclear fuel assembly system and can forecast reaching of the nuclear fuel assembly to criticality or prompt neutron critical state. (I.S.)

  3. Static memory devices

    NARCIS (Netherlands)

    2012-01-01

    A semiconductor memory device includes n-wells (22) and p-wells (24) used to make up a plurality of memory cell elements (40). The n-wells (22) and p-5 wells (24) can be back-biased to improve reading and writing performance. One of the n-wells and p-wells can be globally biased while the other one

  4. Programmable ubiquitous telerobotic devices

    Science.gov (United States)

    Doherty, Michael; Greene, Matthew; Keaton, David; Och, Christian; Seidl, Matthew L.; Waite, William; Zorn, Benjamin G.

    1997-12-01

    We are investigating a field of research that we call ubiquitous telepresence, which involves the design and implementation of low-cost robotic devices that can be programmed and operated from anywhere on the Internet. These devices, which we call ubots, can be used for academic purposes (e.g., a biologist could remote conduct a population survey), commercial purposes (e.g., a house could be shown remotely by a real-estate agent), and for recreation and education (e.g., someone could tour a museum remotely). We anticipate that such devices will become increasingly common due to recent changes in hardware and software technology. In particular, current hardware technology enables such devices to be constructed very cheaply (less than $500), and current software and network technology allows highly portable code to be written and downloaded across the Internet. In this paper, we present our prototype system architecture, and the ubot implementation we have constructed based on it. The hardware technology we use is the handy board, a 6811-based controller board with digital and analog inputs and outputs. Our software includes a network layer based on TCP/IP and software layers written in Java. Our software enables users across the Internet to program the behavior of the vehicle and to receive image feedback from a camera mounted on it.

  5. Radiation flux measuring device

    International Nuclear Information System (INIS)

    Corte, E.; Maitra, P.

    1977-01-01

    A radiation flux measuring device is described which employs a differential pair of transistors, the output of which is maintained constant, connected to a radiation detector. Means connected to the differential pair produce a signal representing the log of the a-c component of the radiation detector, thereby providing a signal representing the true root mean square logarithmic output. 3 claims, 2 figures

  6. Magnetic-bubble devices

    International Nuclear Information System (INIS)

    Fairholme, R.J.

    1978-01-01

    Magnetic bubbles were first described only ten years ago when research workers were discussing orthoferrites containing μm diameter bubbles. However, problems of material fabrication limit crystals to a few mm across which severely curtailed device development. Since then materials have changed and rare-earth-iron garnet films can be grown up 3 inches in diameter with bubble diameters down to sizes below 1 μm. The first commercial products have device capacities in the range 64 000 to 100 000 bits with bubble diameters between 4 and 6 μm. Chip capacities of 1 Mbit are presently under development in the laboratory, as are new techniques to use submicrometre bubbles. The operation and fabrication of a bubble device is described using the serial loop devices currently being manufactured at Plessey as models. Chip organization is one important variable which directly affects the access time. A range of access times and capacities is available which offers a wide range of market opportunities, ranging from consumer products to fixed head disc replacements. some of the application areas are described. (author)

  7. Road-Cleaning Device

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    Roadways are literally soaked with petrochemical byproducts, oils, gasoline, and other volatile substances that eventually run off into sewers and end up in rivers, waterways, and other undesirable places. Can the roads be cleaned of these wastes, with their proper disposal? Can vehicles, robots, or other devices be designed that could be driven…

  8. Loading device for incinerator

    International Nuclear Information System (INIS)

    Hempelmann, W.

    1983-01-01

    An incinerator for radioactive waste is described. Heat radiation from the incinerator into the loading device is reduced by the design of the slider with a ceramic plate and the conical widening of the pot, and also by fixing a metal plate between the pot and the floor. (PW) [de

  9. Surface Acoustic Wave Devices

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard

    The work of this project is concerned with the simulation of surface acoustic waves (SAW) and topology optimization of SAW devices. SAWs are elastic vibrations that propagate along a material surface and are extensively used in electromechanical filters and resonators in telecommunication. A new...

  10. Underwater running device

    International Nuclear Information System (INIS)

    Kogure, Sumio; Matsuo, Takashiro; Yoshida, Yoji

    1996-01-01

    An underwater running device for an underwater inspection device for detecting inner surfaces of a reactor or a water vessel has an outer frame and an inner frame, and both of them are connected slidably by an air cylinder and connected rotatably by a shaft. The outer frame has four outer frame legs, and each of the outer frame legs is equipped with a sucker at the top end. The inner frame has four inner frame legs each equipped with a sucker at the top end. The outer frame legs and the inner frame legs are each connected with the outer frame and the inner frame by the air cylinder. The outer and the inner frame legs can be elevated or lowered (or extended or contracted) by the air cylinder. The sucker is connected with a jet pump-type negative pressure generator. The device can run and move by repeating attraction and releasing of the outer frame legs and the inner frame legs alternately while maintaining the posture of the inspection device stably. (I.N.)

  11. Neutron measuring device

    International Nuclear Information System (INIS)

    Hatayama, Akiyoshi; Seki, Eiji; Kita, Yoshio; Nishitani, Takeo.

    1993-01-01

    The device of the present invention concerns measurement for neutrons in a tokamak type thermonuclear device and it can measure total amount of generated neutrons accurately throughout the operation period even if an error is caused in counted values by plasma disruption. That is, the device comprises (1) a means for detecting presence or absence of occurrence of plasma disruption and the time for the initiation of the occurrence, (2) a first data processing means for processing detection signals, (3) a means for detecting neutrons generated in plasmas and (4) a second data processing means for calculating integrated values for the number of neutrons generated from the start to the completion of electric discharge when no disruption occurs and calculating integrated values for the number of generated neutrons from the start of electric discharge to the time at the initiation of occurrence of the disruption when disruption is present. In the thus constituted device, even if an error is caused by frequent occurrence of plasma disruption, total time integrated amount of neutrons generated in the plasmas can be measured accurately. (I.S.)

  12. Medical device development.

    Science.gov (United States)

    Panescu, Dorin

    2009-01-01

    The development of a successful medical product requires not only engineering design efforts, but also clinical, regulatory, marketing and business expertise. This paper reviews items related to the process of designing medical devices. It discusses the steps required to take a medical product idea from concept, through development, verification and validation, regulatory approvals and market release.

  13. Plant monitoring device

    International Nuclear Information System (INIS)

    Moriyama, Kunio.

    1991-01-01

    The monitoring device of the present invention is most suitable to early detection for equipment abnormality, or monitoring of state upon transient conditions such as startup and shutdown of an electric power plant, a large-scaled thermonuclear device and an accelerator plant. That is, in existent moitoring devices, acquired data are stored and the present operation states are monitored in comparison. A plant operation aquisition data reproduction section is disposed to the device. From the past operation conditions stored in the plant operation data aquisition reproducing section, the number of operation cycles that agrees with the present plant operation conditions is sought, to determine the agreed aquired data. Since these aquired data are time sequential data measured based on the standard time determined by the operation sequence, aquired data can be reproduced successively on every sample pitches. With such a constitution, aquired data under the same operation conditions as the present conditions are displayed together with the measured data. Accordingly, accurate monitoring can be conducted from the start-up to the shutdown of the plant. (I.S.)

  14. Laser decontamination device

    International Nuclear Information System (INIS)

    Michishita, Shizuo; Akagawa, Katsuhiko.

    1997-01-01

    One end of an optical fiber inserted into an inner cylinder is opposed to a wall surface to be decontaminated, and an opened top end of an intermediate cylinder circumferentially surrounding the inner cylinder is tightly in contact with the wall surface to be decontaminated, an open end of an outer cylinder circumferentially surrounding the intermediate cylinder is tightly in contact with the wall surface to be decontaminated. Dust removing holes are perforated in the vicinity of the top end of the intermediate cylinder while being in communication with the inside and the outside of the intermediate cylinder, and one end of an air supply tube is in communication with the space between the outer circumferential surface of the inner cylinder and the inner circumferential surface of the intermediate cylinder. The other end of the air supply tube is connected to an air supply device, one end of a sucking tube is in communication with the space between the outer circumferential surface of the intermediate cylinder and the inner circumferential surface of the outer cylinder, the other end of the sucking tube is connected to a sucking device, and the other end of the optical fiber is connected to a laser generation device. The laser generation device is operated while determining the air sucking amount increased than the air supply amount, the materials deposited on the wall surface are crushed and peeled off, and the peeled off materials are transferred by air flow to a filter and collected. (N.H.)

  15. Rotary combustion device

    NARCIS (Netherlands)

    2008-01-01

    Rotary combustion device (1) with rotary combustion chamber (4). Specific measures are taken to provide ignition of a combustible mixture. It is proposed that a hollow tube be provided coaxially with the axis of rotation (6), so that a small part of the mixture is guided into the combustion chamber.

  16. Devic's Disease (Neuromyelitis optical)

    International Nuclear Information System (INIS)

    Pinzon, Alfredo; Echeverry, Tatiana; Rodriguez, Aida Bibiana

    2010-01-01

    We present a case report about a young woman initially treated as having multiple sclerosis, who relapsed with serious visual impairment. Devic's disease is a demyelinating disorder that presents as transverse myelitis associated with optic neuritis, typically bilateral. Multiple sclerosis is in fact the main differential diagnosis

  17. The ''ATOS'' experimental device

    International Nuclear Information System (INIS)

    Belyaev, V.A.; Dorovskij, A.P.; Dubrovin, M.M.; Khlopkin, A.N.

    1980-08-01

    This paper contains a brief description of the ATOS experimental device at the I.V. Kurchatov Institute, Moscow, USSR, which has been designed in accordance with the merged beam principle to investigate collisions between heavy atomic particles and multiply-charged ions of impurity elements - following the programme of the Joint IFRC/INDC Subcommittee on Atomic and Molecular Data for Fusion

  18. Liver Cell Culture Devices

    NARCIS (Netherlands)

    Andria, B.; Bracco, A.; Cirino, G.; Chamuleau, R. A. F. M.

    2010-01-01

    In the last 15 years many different liver cell culture devices, consisting of functional liver cells and artificial materials, have been developed. They have been devised for numerous different applications, such as temporary organ replacement (a bridge to liver transplantation or native liver

  19. A Medical Delivery Device

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a medical delivery device comprising at least two membrane electrode assembly units each of which comprises three layers: an upper and a lower electrode and a selective ionic conductive membrane provided there-between. At least one of the three layers are shared...

  20. Single Value Devices

    NARCIS (Netherlands)

    Mader, Angelika H.; Dertien, Edwin Christian; Reidsma, Dennis

    2011-01-01

    We live in a world of continuous information overflow, but the quality of information and communication is suffering. Single value devices contribute to the information and communication quality by fo- cussing on one explicit, relevant piece of information. The information is decoupled from a